aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
Commit message (Collapse)AuthorAgeFilesLines
* uboot-rockchip: update to v2021.04David Bauer2021-04-205-671/+31
| | | | | | | | | Update the uboot-rockchip to the latest upstream release. Remove upstreamed patches. Tested-on: FriendlyElec NanoPi R2S Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-envtools: mvebu: add Buffalo LS421DEDaniel González Cabanelas2021-04-171-0/+3
| | | | | | | | The Buffalo Linkstation LS421DE NAS lacks an uboot env config file. Create it via scripts. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* uboot-sunxi: update ATF dependencies for 3 boardsZoltan HERPAI2021-04-151-3/+3
| | | | | | | Fix 3 board definitions that were missed in the process of moving to the a64/h6 ATF blobs. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sunxi: add support for Banana Pi M2 BerryZoltan HERPAI2021-04-121-0/+7
| | | | | | | | | | | | | | | | | | CPU: Allwinner V40 quad-core Cortex A7 @ 1.2GHz Memory: 1GB DDR3 Storage: SDcard, native SATA Network: 10/100/1000M ethernet, Ampak AP6212 wifi + BT USB: 4x USB 2.0 Installation: Use the standard sunxi installation to an SD-card. While the board is very similar to the M2 Ultra board (the V40 is the automotive version of the R40), as both the u-boot and kernel supports them separately, and some pins are different, let's add a separate device spec. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-mediatek: minor fixes for bpi-r64 spi-nand default envDaniel Golle2021-04-111-5/+4
| | | | | | | * check image checksums before writing to flash * only bootmenu_0...9 are working, remove bootmenu_a entry Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: add support for H6 boards and OrangePiOnePlusZoltan HERPAI2021-04-113-0/+23
| | | | | | | | | | | | | | | | | | | | Specifications: SoC Allwinner H6 @ 1.8 Ghz DRAM 1Gb LPDDR3 Power DC 5V @ 3A Video HDMI (Type 2.0A - full) Audio HDMI, on-board microphone Network 10/100/1000Mbps Ethernet (Realtek RTL8211) Storage microSD USB 1 USB2.0 Host, 1 USB2.0 OTG Debug Serial UART Flashing instructions: Standard sunxi SD card installation procedure - copy image to SD card, insert into SD card slot on the device and boot. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* arm-trusted-firmware-sunxi: move to use the common tf-a build code and bump ↵Zoltan HERPAI2021-04-112-14/+20
| | | | | | | | | | | | | | | | | | | | | | | | to latest version Create a -a64 package for now. Moving to the latest ATF was tested on a SoPine A64 board. U-Boot SPL 2020.04 (Feb 19 2021 - 11:28:19 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.4(release):reboot-15854-g42b39a13d2 NOTICE: BL31: Built : 22:45:53, Feb 22 2021 NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) NOTICE: BL31: Found U-Boot DTB at 0x4090a28, model: SoPine with baseboard NOTICE: PSCI: System suspend is unavailable U-Boot 2020.04 (Feb 19 2021 - 11:28:19 +0000) Allwinner Technology CPU: Allwinner A64 (SUN50I) Model: SoPine with baseboard DRAM: 2 GiB Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: add ATF variable for specifying which flavour to useZoltan HERPAI2021-04-112-2/+11
| | | | | | | In preparation for H6 support (which requires a separate ATF blob), add an envvar to the A64 boards specifying which ATF blob to use. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-envtools: support environment in spi-nand on bpi-r64Daniel Golle2021-04-111-3/+11
| | | | | | | Default to U-Boot env in UBI if root device is not mmc block device. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* uboot-mediatek: add spi-nand build for bananapi bpi-r64Daniel Golle2021-04-113-21/+302
| | | | | | | | Some of bpi-r64 boards have serial NAND attached to SPI bus. Build U-Boot for booting from SPI-NAND. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mediatek: fix writing bananapi bpi-r64 envOskari Lemmela2021-04-111-3/+4
| | | | | | | Use generic functions to get env partition. Fixes: 7043e4334f0 ("mediatek: mt7622: improve sysupgrade on MMC") Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mediatek: bpi-r64: use separate partition for emmc bootloaderOskari Lemmela2021-04-111-4/+4
| | | | | | | eMMC booloader is stored to separate partition. FIP size is increased to 2MB. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* uboot-envtools: oxnas: drop redundant space after case keywordsPiotr Dymacz2021-04-101-1/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: layerscape: drop redundant space after case keywordsPiotr Dymacz2021-04-101-1/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: ipq806x: drop redundant space after case keywordsPiotr Dymacz2021-04-101-3/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: ipq40xx: drop redundant space after case keywordsPiotr Dymacz2021-04-101-10/+10
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: imx6: drop redundant space after case keywordsPiotr Dymacz2021-04-101-28/+28
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: drop shebang from uci-defaults and lib filesPiotr Dymacz2021-04-1016-18/+0
| | | | | | These files are sourced and non-executable, a shebang is redundant. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx6: define 'BUILD_DEVICES' for Toradex ApalisPiotr Dymacz2021-04-101-0/+1
| | | | | | | Without 'BUILD_DEVICES' defined, the U-Boot related package won't be automatically selected when building for Toradex Apalis device. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx6: align indent size in MakefilePiotr Dymacz2021-04-101-5/+5
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx6: drop support for Nitrogen6x/SABRE devicesPiotr Dymacz2021-04-101-35/+0
| | | | | | | | | | | These devices never got officially supported in the tree thus it doesn't make much sense to waste our infrastructure resources and keep building dedicated U-Boot images for them. CC: Petr Štetiar <ynezz@true.cz> CC: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Acked-by: Petr Štetiar <ynezz@true.cz>
* uboot-envtools: add env settings for ubnt,unifi-6-lr-ubootmodDaniel Golle2021-04-091-2/+5
| | | | | | | | | Add settings for fw_printenv/fw_setenv for the Ubiquiti UniFi 6 LR when running OpenWrt's version of U-Boot. The settings should work equally with the unmodified version, but that has not yet been tested. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add build for Ubiquiti Networks UniFi 6 LRDaniel Golle2021-04-094-7/+485
| | | | | | | | | | | | | | | | Add U-Boot build for the Ubiquiti Networks UniFi 6 LR access point. This allows updating the bootchain to modern ARM Trusted Firmware 2.4 and U-Boot 2021.04 while keeping as much of the existing flash layout as possible (u-boot-env, factory and eeprom partitions are retained), gaining robust recovery vs. production dual-boot mechanism. Add info for the Winbond W25Q512JV SPI NOR flash used in the device and wait for GPIOs to settle after reset before checking for reset button. I2C connected LED controller is not supported yet. Writing large amounts of data to SPI flash currently doesn't work due to watchdog timeout causing reset before data write completes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: increase NOR bl3 sizeDaniel Golle2021-04-091-0/+11
| | | | | | | | Use bl3 size of 0xa0000 instead of 0x80000 in NOR flash. This results in bl3 ending at 0xc0000 which is where the legacy bootchain typically puts U-Boot environment. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: bpi-r64: erase eMMC environment on installationDaniel Golle2021-04-091-1/+1
| | | | | | | Erase U-Boot environment partition on eMMC on installation to make sure chages are applied. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: add wrapper scripts for alternate configBjørn Mork2021-04-083-0/+6
| | | | | | | | Now that we can create an alternate configuration file, add two wrapper scripts for simple access to it using the alternate alternate application names `fw_printsys' and `fw_setsys'. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* uboot-envtools: add support for multiple config partitionsBjørn Mork2021-04-083-15/+32
| | | | | | | | | | | | | | | | | | | | | | Most (all?) of the realtek devices have two u-boot config partitions with a different set of variables in each. The U-Boot shell provides two sets of apps to manipulate these: printenv- print environment variables printsys- printsys - print system information variables saveenv - save environment variables to persistent storage savesys - savesys - save system information variables to persistent storage setenv - set environment variables setsys - setsys - set system information variables Add support for multiple ubootenv configuration types, allowing more than one configuration file. Section names are not suitable for naming the different configurations since each file can be the result of multiple sections in case of backup partitions. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* uboot-mediatek: update to v2021.04Daniel Golle2021-04-059-79/+8
| | | | | | | | | | Remove patches merged upstream and refresh the remaining ones. Runtime tested on * Bananapi BPi-R64 (eMMC and SD Card) * Linksys E8450 (SPI-NAND) * Ubiquiti UniFi 6 LR (SPI-NOR) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: bpi-r64: no longer force recovery on first-bootDaniel Golle2021-04-041-4/+4
| | | | | | | | Now that sdcard.gz image contains everything needed to boot straight into production image, no longer force booting into recovery image on first boot by removing the logic which implemented that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: adapt root= cmdline arg for bpi-r64Daniel Golle2021-03-311-2/+2
| | | | | | Adapt to FIT partition parser changes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kexec-tools: update to 2.0.21Rosen Penev2021-03-192-53/+3
| | | | | | | | | | | | | kdump was removed in 7acd257ae67b4ca94f8c23cb8bda0ee0709b9216 gdb can be used as an alternative. Remove autoreconf. It's not needed as the configure files are already generated. Remove upstreamed patch. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* uboot-mediatek: don't rely in 'lzma' cmdlineDaniel Golle2021-03-182-5/+11
| | | | | | | Use 'xz --format=lzma' instead. Fixes build for mt7629. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: Fix writing U-Boot env on Buffalo WSR-2533DHP2Hauke Mehrtens2021-03-171-1/+1
| | | | | | | This fixes writing to the U-Boot environment by making the partition writable and setting the correct flash sector size of 128K. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-mediatek: fix default environment of bpi-r64 emmcDaniel Golle2021-03-171-1/+1
| | | | | | | The emmc variant used the default environment of the sdmmc variant. Fix that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: bpi-r64: make use of FIT configuration selectionDaniel Golle2021-03-171-10/+16
| | | | | | | | | | | | | Allow selecting either SATA or PCIE functionality using uImage.FIT configurations and device-tree overlays. By default, PCIE1 is selected (as it has been before this change). To select SATA instead, you can do this now: fw_setenv bootconf config-mt7622-bananapi-bpi-r64-sata and reboot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Buffalo WSR-2533DHP2INAGAKI Hiroshi2021-03-151-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Buffalo WSR-2533DHP2. The device uses the Broadcom TRX image format with a special magic. To be able to boot the images or load them they have to be wrapped with different headers depending how it is loaded. There are multiple ways to install OpenWrt on this device. Boot ramdisk from U-Boot ---------------------------- This will load the image and not write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux to SDRAM via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-initramfs-kernel.bin 4. The system boots the image Write to flash from U-Boot ----------------------------- This will load the image over tftp and directly write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux Kernel then write to Flash via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory-uboot.bin 4. The system writes this image into the flash and boots into it. Write to flash from Web UI ----------------------------- This will load the image over over the Web UI and write it into the flash 1. Open the Web UI 2. Go to "管理" -> "ファームウェア更新" 3. Select "ローカルファイル指定" and click "更新実行" 4. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory.bin 5. The system writes this image into the flash and boots into it. Specifications ------------------- * SoC: MT7622 (4x4 2.4 GHz Wifi) * Wifi: MT7615 (4x4 5 GHz Wifi) * Flash: Winbond W29N01HZ 128MB SLC NAND * RAM 256MB * Ethernet: Realtek RTL8367S (5 x 1GBit/s, SoC via 2.5GBit/s) Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-mediatek: also install production image to eMMCDaniel Golle2021-03-141-2/+5
| | | | | | | Make installation to eMMC more convenient on the BPi-R64 by also copying the production image (if valid) from SD Card to eMMC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: select matching U-Boot for boardDaniel Golle2021-03-141-9/+15
| | | | | | | Instead of building all U-Boot variants by default, build only those needed by the selected board(s). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* realtek: Add ZyXEL GS1900-8Hauke Mehrtens2021-03-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or SFP ports, but otherwise similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-8 v1.2 * SoC: Realtek RTL8380M 500 MHz MIPS 4KEc * Flash: Macronix MX25L12835F 16 MiB * RAM: Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM * Ethernet: 8x 10/100/1000 Mbit * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 8 ethernet port status LEDs (green, SoC controlled) * Buttons: 1 on-off glide switch at the back (not configurable) 1 reset button at the right side, behind the air-vent (not configurable) 1 reset button on front panel (configurable) * Power 12V 1A barrel connector * UART: 1 serial header (JP2) with populated standard pin connector on the left side of the PCB, towards the back. Pins are labelled: + VCC (3.3V) + TX (really RX) + RX (really TX) + GND the labelling is done from the usb2serial connector's point of view, so RX/ TX are mixed up. Serial connection parameters for both devices: 115200 8N1. Installation ------------ Instructions are identical to those for the GS1900-10HP and GS1900-8HP. * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-10HP is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot off the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-mediatek: import fix for AHCI and enable SATADaniel Golle2021-03-132-2/+26
| | | | | | | | Import patch form Frank Wunderlich <frank-w@public-files.de> to fix build of MediaTek AHCI SATA driver. Enable that driver on Bananapi BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix build on Mac OS XDaniel Golle2021-03-131-0/+10
| | | | | | | Copy patch added to uboot-sunxi by commit 3cc57ba462 ("uboot-sunxi: add missing type __u64") also to uboot-mediatek. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update configs for MT7622 deviesDaniel Golle2021-03-122-4/+48
| | | | | | | * make sure USB 2.0 works (useful for UEFI-booting eg. memtest86) * include more useful U-Boot config options on BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update to 2021.04-rc3 with MediaTek's patchesDaniel Golle2021-03-1139-8847/+5711
| | | | | | | | | | | | | | MediaTek published their current U-Boot patchset on github: https://github.com/mtk-openwrt/u-boot/commits/mtksoc Import the platform patches from there (`00-mtk-*.patch`), arrange, them nicely, drop no longer needed local patches and rebase on top of U-Boot 2021.04-rc3. Tested and works well on Linksys E8450 (snand-1ddr) as well as Bananapi BPi-R64 (sdmmc-2ddr, emmc-2ddr). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: update to 2021-03-10Daniel Golle2021-03-111-4/+8
| | | | | | | | Most prominently this adds changes which allow replacing the binary- only 'bromimage' tool by U-Boot's 'mkimage' (see previous commit). This fixes build on non-Linux and/or non-x86 platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* tools: mkimage: add patches for 64-bit MediaTek BootROMDaniel Golle2021-03-111-17/+0
| | | | | | | Add patches for mkimage to allow using it instead of the binary-only 'bromimage' tool to generate bl2 for MT7622. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: fix typo SPI-SNAND -> SPI-NANDDaniel Golle2021-03-081-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: prune now uneeded declarationsDaniel Golle2021-03-061-7/+0
| | | | | | | Remove unneeded delcarations form package Makefile now that everything comes from github.com/mtk-openwrt upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: don't select DDR3_FLYBY for 1ddrDaniel Golle2021-03-051-10/+6
| | | | | | | DDR3_FLYBY has accidentally been set also for the 1-chip variant which lead to broken, unbootable images. Fix that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: improve BPi-R64 supportDaniel Golle2021-03-052-6/+14
| | | | | | | | * allow MAC address from U-Boot env to be inhertied * allow eMMC installation to succeed also without recovery present on the SD Card. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: update to ATF 2.4 (2021-02-25)Daniel Golle2021-03-053-61/+30
| | | | | | | | | | | | | | | | | | | | All necessary blobs are now contained in the upstream repository, no more wild replacing of blobs needed. This new version also contains new storage drivers for (SPI-)NAND which already comes with support for FM35Q1GA, so that patch can be dropped as well. Tested on: * Bananapi BPi-R64 - sdmmc-2ddr - emmc-2ddr * Linksys E8450 - snand-1ddr All works fine (booting Bananapi BPi-R64 from SD Card does NOT require a signed image, so patch arm-trusted-firmware-mediatek to allow doing that). Signed-off-by: Daniel Golle <daniel@makrotopia.org>