aboutsummaryrefslogtreecommitdiffstats
path: root/include/image.mk
Commit message (Collapse)AuthorAgeFilesLines
* image: fix append-image when building multiple profilesDaniel Golle2021-03-241-1/+1
| | | | | | | | In case CONFIG_TARGET_MULTI_PROFILE is set, IMG_PREFIX cannot be expanded. Use DEVICE_IMG_PREFIX instead and make sure it's defined. Fixes: 8f89b1ab0f ("image: add 'append-image' build command") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: artifacts: add dependency for built imagesOskari Lemmela2021-03-241-2/+4
| | | | | | | Add possibility to use images and initramfs in artifacts. Signed-off-by: Oskari Lemmela <oskari@lemmela.net> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* include/image*: add support for device-tree overlaysDaniel Golle2021-03-171-3/+5
| | | | | | | | | | | Add new target feature 'dt-overlay' which makes DTC keep the symbol names in the generated dtb. Make sure additional DT overlay sources specified by the new device variable DEVICE_DTS_OVERLAY get compiled together with the main DTS (currently overlays got to be in the same folder). Let Build/fit pass the generated DT overlay blobs to mkits.sh. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: use config-1 instead of config@1 as defaultRobert Marko2021-03-051-1/+1
| | | | | | | | | | U-boot will reject all nodes with @ since commit: https://gitlab.denx.de/u-boot/u-boot/-/commit/79af75f7776fc20b0d7eb6afe1e27c00fdb4b9b4 This will cause the OpenWrt images to fail booting, to rectify use the config-1 as default. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* build: use numeric uid/gid on cpio callsFelix Fietkau2021-03-031-1/+1
| | | | | | | There are systems that don't have the 'root' group, so don't rely on host specific user/group names Signed-off-by: Felix Fietkau <nbd@nbd.name>
* include: use cpio from staging dirDavid Bauer2021-02-281-1/+1
| | | | | | | As we built our own CPIO now, use this version instead of whatever the host may or may not provide. Signed-off-by: David Bauer <mail@david-bauer.net>
* treewide: rename IMAGE_PREFIX/IMAGE_NAME to DEVICE_IMG_*Adrian Schmutzler2021-02-251-21/+21
| | | | | | | | | | | | | | We so far had two variables IMG_PREFIX and IMAGE_PREFIX with different content. Since these names are obviously quite confusing, this patch renames the latter to DEVICE_IMG_PREFIX, as it's a device-dependent variable, while IMG_PREFIX is only (sub)target-dependent. For consistency, also rename IMAGE_NAME to DEVICE_IMG_NAME, as that's a device-dependent variable as well. Cc: Paul Spooren <mail@aparcar.org> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: avoid generating JSON info on missing imageDavid Bauer2021-02-241-2/+2
| | | | | | | | | | | Previously, build would fail for targets containing devices with not initramfs image (such as mpc85xx-p1010). Only generate the JSON image info for the initramfs image when we have one to avoid breaking the builds. Fixes commit d3140d052964 ("build/json: generate json file for initramfs") Signed-off-by: David Bauer <mail@david-bauer.net>
* build/json: generate json file for initramfsMoritz Warning2021-02-211-1/+34
| | | | | | | | The initramfs images are missing from the profiles.json files. Signed-off-by: Moritz Warning <moritzwarning@web.de> [fix code by exporting device variables] Signed-off-by: Paul Spooren <mail@aparcar.org>
* mediatek: more clean solution for out-of-tree DTSDaniel Golle2021-02-191-2/+2
| | | | | | | | | | | Use approach suggested by Adrian Schmutzler instead of introducing another device variable. Also revert the unnecessary white-space changes accidentally introduced by the previous commit. Fixed: c067b1e79b ("mediatek: move out-of-tree DTS files to dedicated dts folder") Suggested-by: Adrian Schmutzler <mail@adrianschmutzler.de> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: move out-of-tree DTS files to dedicated dts folderDaniel Golle2021-02-191-2/+2
| | | | | | | | | | | Use dedicated dts folder like on ramips to store device tree source files for boards not already supported in vanilla Linux. Doing so instead of having them in files-* has several advantages: * we don't need to duplicate them for several kernel versions * changes to a device tree don't trigger a complete kernel rebuild * the files are more obvious to find Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: use SPDX license tagsPaul Spooren2021-02-051-5/+2
| | | | | | | | | The license folder is a core part of OpenWrt and all GPL-2.0 licensed. Use SPDX license tags to allow machines to check licenses. Signed-off-by: Paul Spooren <mail@aparcar.org> [rebase, keep some Copyright lines, sharpen commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: provide global default for SUPPORTED_DEVICESAdrian Schmutzler2021-01-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The majority of our targets provide a default value for the variable SUPPORTED_DEVICES, which is used in images to check against the compatible on a running device: SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) At the moment, this is implemented in the Device/Default block of the individual targets or even subtargets. However, since we standardized device names and compatible in the recent past, almost all targets are following the same scheme now: device/image name: vendor_model compatible: vendor,model The equal redundant definitions are a symptom of this process. Consequently, this patch moves the definition to image.mk making it a global default. For the few targets not using the scheme above, SUPPORTED_DEVICES will be defined to a different value in Device/Default anyway, overwriting the default. In other words: This change is supposed to be cosmetic. This can be used as a global measure to get the current compatible with: $(firstword $(SUPPORTED_DEVICES)) (Though this is not precisely an achievement of this commit.) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build/json: add filesystem informationPaul Spooren2020-12-131-0/+1
| | | | | | | | Some images are created using different filesystems, most popular squashfs and ext4. To allow downstream projects to distinguesh between those, add the `filesystem` information to created json files. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: add UIMAGE_MAGIC to device variablesSander Vanheule2020-11-251-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Allow a device recipe to specify a custom UIMAGE_MAGIC value, as used by OpenWrt's -M flag for mkimage. This allows to automatically customize the magic bytes in all calls to Build/uImage for this device, similar to the behaviour of UIMAGE_NAME. Since the -M argument is inserted before the user arguments, it can be overriden. The following example would use 0x87654321 for the KERNEL image, but 0x12345678 for the KERNEL_INITRAMFS image: define Device/MyDevice UIMAGE_MAGIC := 0x87654321 KERNEL := ... | uImage lzma KERNEL_INITRAMFS := ... | uImage lzma -M 0x12345678 ... endef Fixes: df8e6be59a1f ("rtl838x: add new architecture") [UIMAGE_MAGIC was not declared as a device variable] Signed-off-by: Sander Vanheule <sander@svanheule.net> [rebase, improve formatting of "Fixes"] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: store SOURCE_DATE_EPOCH in JSON info filesPaul Spooren2020-11-121-0/+1
| | | | | | | | The source date epoch is the only reproducible date close to the actual build date. It can be used for tooling like the firmware wizard to show the image age. Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: remove obsolete kernel version switches for 4.19Adrian Schmutzler2020-10-301-12/+6
| | | | | | | This removes switches dependent on kernel version 4.19 as well as several packages/modules selected only for that version. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* image: drop obsolete legacy image recipesAdrian Schmutzler2020-10-301-11/+0
| | | | | | | LegacyDevice is not used anymore in our tree, so let's drop it together with the relevant definitions and recipes. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* image: drop unused legacy NAND build recipesAdrian Schmutzler2020-10-301-29/+0
| | | | | | | This drops unused legacy recipes Image/Build/SysupgradeNAND and Image/Build/UbinizeImage. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* image.mk: evaluate /etc/selinux/config to choose SELinux policyDaniel Golle2020-09-291-2/+3
| | | | | | | | Instead of hardcoding 'targeted' policy, evaluate /etc/selinux/config in rootfs to choose according to which policy files in the rootfs got to be labeled. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* policycoreutils: install to host/bin not hostpkgPaul Spooren2020-09-291-1/+1
| | | | | | | | By installing policycoreutils to host/bin it is also available within the ImageBuilder and SDK, allowing to correctly label both filesystems and packages. Signed-off-by: Paul Spooren <mail@aparcar.org>
* policycoreutils: fix host utils rpath and bin directoryDaniel Golle2020-09-271-2/+1
| | | | | | | | | 'setfiles' and others should be installed to $(STAGING_DIR_HOSTPKG)/bin rather than $(...)/sbin which isn't in PATH. Also using -Wl,-rpath to set library search location instead of setting LD_LIBRARY_PATH when calling setfiles in image.mk. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts: mkits.sh make it possible to specify fdt@#Christian Lamparter2020-09-251-2/+4
| | | | | | | | | | | | | | Some bootloaders are really keen on just one special fdt in a multi-image fit image. This is a problem, because currently this is fixed to "fdt@1". This patch introduces a new device variable: DEVICE_FDT_NUM that allows to specify the right fdt number. If the value is absent "1" will be chosen. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* build: unbreak fakeroot in SDKDaniel Golle2020-09-011-1/+1
| | | | | | | | Using fakeroot without passing the paths to libfakeroot.sh and faked causes havoc. Use the $(FAKEROOT) Make variable which includes them. Fixes: 353ce2e521 ("build: ipkg-build use fakeroot with PKG_FILE_MODES") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: add support for SELinux to include/image.mkThomas Petazzoni2020-08-311-1/+18
| | | | | | | | | This allows the build process to prepare a squashfs filesystem for use with SELinux. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [rebase, add commit message] Signed-off-by: W. Michael Petullo <mike@flyn.org>
* build: add DEVICE_COMPAT_VERSION and DEVICE_COMPAT_MESSAGEAdrian Schmutzler2020-07-311-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We regularly encounter the situation that devices are subject to changes that will make them incompatible to previous versions. Removing SUPPORTED_DEVICES will not really be helpful in most of these cases, as this only helps after a rename. To solve this situation, this patchset introduces a compatibility version for devices. It will be implemented via a per-device Make variable DEVICE_COMPAT_VERSION, which will be set to 1.0 globally by default and then can be overwritten as needed. Furthermore, a variable DEVICE_COMPAT_MESSAGE is added, where a message to be displayed during sysupgrade may be specified optionally. This patch only implements the build variables and adds them to the sysupgrade metadata, the evaluation will be addressed in a subsequent patch. To set it, one would just need to add the following to a device node: define Device/somedevice ... DEVICE_COMPAT_VERSION := 1.1 DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA endef Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: add option to mark devices as BROKENAdrian Schmutzler2020-07-301-0/+2
| | | | | | | | | | | By specifying "BROKEN := 1" or "BROKEN := y" for a device, it will be hidden (and deselected) by default. By that, it provides a stronger option to "disable" a device beyond just using DEFAULT := n. To make these devices visible, just enable the BROKEN option in developer settings as already implemented for targets and packages. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: store default/device packages in JSONPaul Spooren2020-06-301-0/+1
| | | | | | | | | | | | With this commit the `profiles.json` contain both the target specific `default_packages` as well as the device specific `device_packages` as a array of strings. This information is required for downstream projects like the various web-based interactive firmware generators. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Paul Spooren <mail@aparcar.org>
* treewide: convert sed -r to posix -EKevin Darbyshire-Bryant2020-04-041-1/+1
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* build: refactor JSON info files to `profiles.json`Paul Spooren2020-04-031-29/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | JSON info files contain machine readable information of built profiles and resulting images. These files were added in commit 881ed09ee6e2 ("build: create JSON files containing image info"). They are useful for firmware wizards and script checking for reproducibility. Currently all JSON files are stored next to the built images, resulting in up to 168 individual files for the ath79/generic target. This patch refactors the JSON creation to store individual per image (not per profile) files in $(BUILD_DIR)/json_info_files and create an single overview file called `profiles.json` in the target directory. Storing per image files and not per profile solves the problem of parallel file writes. If a profiles sysupgrade and factory image are finished at the same time both processes would write to the same JSON file, resulting in randomly broken outputs. Some target like x86/64 do not use the image code yet, resulting in missing JSON files. If no JSON info files were created, no `profiles.json` files is created as it would be empty anyway. As before, this creation is enabled by default only if `BUILDBOT` is set. Tested via buildroot & ImageBuilder on ath79/generic, imx6 and x86/64. Signed-off-by: Paul Spooren <mail@aparcar.org> [json_info_files dir handling in Make, if case refactoring] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: generate EFI platform bootable images李国2020-03-311-0/+1
| | | | | | | | | | | | | | | | | Add EFI platform bootable images for x86 platforms. These images can also boot from legacy BIOS platform. EFI System Partition need to be fat12/fat16/fat32 (not need to load filesystem drivers), so the first partition of EFI images are not ext4 filesystem any more. GPT partition table has an alternate partition table, we did not generate it. This may cause problems when use these images as qemu disk (kernel can not find rootfs), we pad enough sectors will be ok. Signed-off-by: 李国 <uxgood.org@gmail.com> [part_magic_* refactoring, removed genisoimage checks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: switch image generation to new codePaul Spooren2020-03-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | This commit introduces few related changes which need to be done in single commit to keep images buildable between git revisions. In result it retains all previous image creation possibilities with slight name change of generated images. Brief summary of the commit: * Split up image generation recipe to smaller chunks to make it more generic and reusable. * Make iso images x86 specific and drop their definition as root filesystem. * Convert image creation process to generic code specified in image.mk. * Make geode subtarget inherit features from the main target instead of redefining them. * For subtargets create device definitions with basic packages set. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [rebased] Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: image: move IMAGE_SIZE to image.mkSungbo Eo2020-03-111-3/+3
| | | | | | | | | | IMAGE_SIZE is widely used in many targets. Declare it in the default template to clean up redundant code. This also prevents deriving IMAGE_SIZE unintentionally from the previously defined device. While at it, remove duplicate KERNEL_SIZE declaration. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* build: fix empty SUBTARGET in json filesPaul Spooren2020-02-131-1/+1
| | | | | | | | | | | | | | | Some targets like kirkwood or omap don't use a subtarget which results in a malformed JSON info file. Instead of having a valid value like `"target": "ath79/tiny"` for these targets the value is `"target": "kirkwood/"`. This patch uses the same if condition to use `generic` if the subtarget is empty. Tested for the kirkwood target. Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: remove further obsolete kernel version switchesSungbo Eo2020-01-181-12/+7
| | | | | | | | Most of the kernel version switches below 4.14 were removed in commit 97940f876616 ("kernel: remove obsolete kernel version switches"), but some of them still remained. Remove them now. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* build: image: add SOC device variableAdrian Schmutzler2019-12-201-1/+2
| | | | | | | | | This creates the device variable SOC and adds it to DEFAULT_DEVICE_VARS. It is supposed to replace target-specific SOC variables like ATH_SOC or MTK_SOC and thus unify variable names across targets. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: image: posix compatibility cut v headKevin Darbyshire-Bryant2019-11-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | Replace 2 instances of non posix use of 'head' with posix compliant 'cut'. 'head -c n' cuts 'n' bytes from the passed string and happens to work on Linux & Mac OS X even though '-c' is not posix. 'head --bytes n' does the same thing and happens to work on linux but not on Mac OS X and is also not posix. 'cut -b1-8' cuts the first 8 bytes from the passed string and is posix compliant, hence works on Linux & Mac OS X. Our usage of 'head --bytes' was particularly unfortunate since it was used to calculated the RootFS UUID passed to grub - the net result being a non-functioning system waiting for the root file system to appear. Thanks to karlp, ynezz & others for pointers on solving this. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* build: image: add common and reproducible IMG_PART_SIGNATURE variablePaul Spooren2019-11-111-0/+1
| | | | | | | | | | | | | | x86, mvebu and tegra targets are currently using more or less same SIGNATURE variable which provides unique partition ID/signature, so it makes sense to refactor it out into common variable which could be reused by all targets. While at it, make the content of the variable reproducible. Ref: http://lists.infradead.org/pipermail/openwrt-devel/2019-March/016148.html Signed-off-by: Paul Spooren <mail@aparcar.org> Suggested-by: Jo-Philipp Wich <jo@mein.io> [renamed to IMG_PARTSIGNATURE, reworked with epoch+vermagic hash] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: image: fix build breakage of some imagesPetr Štetiar2019-11-081-0/+1
| | | | | | | | | | | | | Commit 881ed09ee6e2 ("build: create JSON files containing image info") has removed the crucial empty new line from the image copy step resulting in the following errors during make function expansion: GZ_SUFFIX := bash: GZ_SUFFIX: command not found Makefile:86: recipe for target 'openwrt-ath79-generic-tplink_archer-c7-v5-squashfs-sysupgrade.bin' failed Fixes: 881ed09ee6e2 ("build: create JSON files containing image info") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: label kernel and rootfs ext4 volumesYousong Zhou2019-11-031-1/+1
| | | | | | | | | | | UUID of ext4 volumes generated by make_ext4fs are determined by volume label and it will all be 57f8f4bc-abf4-655f-bf67-946fc0f9f25b when label is empty Labeling them does not make them unique but tools like block command from fstools have a better chance differentiating them Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: create JSON files containing image infoPaul Spooren2019-09-291-1/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The JSON info files contain details about the created firmware images per device and are stored next to the created images. The JSON files are stored as "$(IMAGE_PREFIX).json" and contain some device/image meta data as well as a list of created firmware images. An example of openwrt-ramips-rt305x-aztech_hw550-3g.json { "id": "aztech_hw550-3g", "image_prefix": "openwrt-ramips-rt305x-aztech_hw550-3g", "images": [ { "name": "openwrt-ramips-rt305x-aztech_hw550-3g-squashfs-sysupgrade.bin", "sha256": "db2b34b0ec4a83d9bf612cf66fab0dc3722b191cb9bedf111e5627a4298baf20", "type": "sysupgrade" } ], "metadata_version": 1, "supported_devices": [ "aztech,hw550-3g", "hw550-3g" ], "target": "ramips/rt305x", "titles": [ { "model": "HW550-3G", "vendor": "Aztech" }, { "model": "ALL0239-3G", "vendor": "Allnet" } ], "version_commit": "r10920+123-0cc87b3bac", "version_number": "SNAPSHOT" } Signed-off-by: Paul Spooren <mail@aparcar.org>
* Revert "build: remove harmful -nopad option from mksquashfs"Jonas Gorski2019-09-071-1/+1
| | | | | | | | | | | | | | This reverts commit 1c0290c5cc6258c48b8ba46b4f9c85a21de4f875. Dropping the nopad can make the padding overflow into the next erase block on devices using a non-aligned rootfs start. This breaks the jffs2 overlay partition with the following messages: [ 30.343877] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000 [ 30.376512] jffs2: Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes [ 30.385253] jffs2: empty_blocks 196, bad_blocks 0, c->nr_blocks 197 Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* build: remove harmful -nopad option from mksquashfsChristian Lamparter2019-08-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While the -nopad option prevents mksquashfs from padding the image to an arbitrary 4k. It does not take into consideration that squashfs is programmed to have this 4k padding when it's being used on on a block device... which is its main "use-case". Now, after a week long discussion on the ML that included a back-and-forth between some of the possible options. But this is likely the best KISS patch to deal with the issue right away given the limited resources. From squashfs code point of view, be warned. The 4k padding is not enough when dealing with devices that have a PAGE_SIZE bigger than 4k. if it turns out to be affecting you, then please look-up either: "FS#2460 - kernel panic reading squashfs from ubi volume" bug Or the discussion on the OpenWrt-Devel ML in "amp821xx: use newly added pad-squashfs for Meraki MR24" and "Squashfs breakage lottery with UBI..." before making an educated guess. Note: This will not affect the "tiny"/small flash devices as much as it seems at first. This is because the the rootfs_data partition that follows uses jffs2. And it requires to be aligned to the flash block-size in order to work at all. So either the involved FSes will meet in the middle as before, or not at all. But in that latter case the image was already hoping for the "undefined behaviour" gamble to turn out in its favour and this is probably why this was unnoticed for so long. Fixes: FS#2460 Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* image.mk: keep underscores when sanitize PROFILEPaul Spooren2019-08-221-1/+1
| | | | | | | | | | | | | | | | | | | Underscores don't harm in filenames, however the sanitize function from version.mk replaces them, causing inconsistent filenames. A fix tried to solve this previously via dfe99645dbdd4460f394beaa3a05091cd40b5942 however I did not look close enough: openwrt-ath79-generic-8dev-carambola2.manifest # current openwrt-ath79-generic_8dev-carambola2.manifest # patched ---------------------^ Eventually the sanitization of PROFILES *could* be removed as more and more profiles follow the device tree approach of vendor_model, neither containing upper case letters nor spaces. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: introduce ALT vendor/model/variantPaul Spooren2019-08-221-2/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some devices are produced and sold under different names. To debloat the buildroot but keeping it complete, new variables are introduced to handle different namings. Below an example taken from a recent PR[0] DEVICE_VENDOR := Arcadyan DEVICE_MODEL := ARV4520PW DEVICE_ALT0_VENDOR := Vodafone DEVICE_ALT0_MODEL := Easybox 800 DEVICE_ALT1_VENDOR := Airties DEVICE_ALT1_MODEL := WAV-281 With this commit the buildroot is extended to take care of up to three alternative namings. The primary title plus alternatives names (if defined) are shown in the `make menuconfig` dialog. Selecting on of devices automatically selects all alternative names as they share the same profile. A list of the newly introduced variables: DEVICE_ALT0_VENDOR := DEVICE_ALT0_MODEL := DEVICE_ALT0_VARIANT := DEVICE_ALT1_VENDOR := DEVICE_ALT1_MODEL := DEVICE_ALT1_VARIANT := DEVICE_ALT2_VENDOR := DEVICE_ALT2_MODEL := DEVICE_ALT2_VARIANT := [0]: https://github.com/openwrt/openwrt/pull/2229/files#diff-b436f01932a18876c27800ba183d95f6R140 Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: allow overriding default selection state for devicesJonas Gorski2019-08-131-0/+3
| | | | | | | | | | | | | | | | | | | Allow overriding the default selection state for Devices, similar to setting a default for packages. E.g. by setting DEFAULT to n, they won't be selected by default anymore when enabling all device in the multi device profile. This allows preventing images being built by the default config for known broken devices, devices without enough RAM/flash, or devices not working with a certain kernel versions. This does not prevent the devices from being manually selected or images being built by the ImageBuilder. These devices often still have worth with a reduced package-set, or as a device for regression testing, when no better device is available. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* image.mk: remove device_ from manifest filenamePaul Spooren2019-08-131-1/+1
| | | | | | | | | | | | | | | | | | | The manifest file is based on IMG_PREFIX and PROFILE_SANITIZED, whereas the latter takes a string like DEVICE_8dev_carambola2 and sanitizes it. This behaviour results in a useless "device_" profile-prefix in the device manifest filename. Now uses *subst* to remove that. Therefore this patch results more consistent device file names: openwrt-ath79-generic-8dev_carambola2-initramfs-kernel.bin openwrt-ath79-generic-8dev-carambola2.manifest openwrt-ath79-generic-8dev_carambola2-squashfs-sysupgrade.bin instead of a single file being called openwrt-ath79-generic-device_8dev-carambola2.manifest Signed-off-by: Paul Spooren <mail@aparcar.org>
* ath79: split DEVICE_TITLE in multiple variablesPaul Spooren2019-07-041-2/+6
| | | | | | | | | | | | | | This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: image: make image padding OS agnosticPetr Štetiar2019-06-271-4/+4
| | | | | | | | | | Image padding with dd needs to be done in an OS independent way as not all dd understand capital letter unit specifiers, and not all understand lowercase either. Fixes: 97833a57eff1 ("build: image: add pad-to and pad-rootfs-squashfs helpers") Reported-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: image: add IMG_ROOTFS and IMG_COMBINED variablesPetr Štetiar2019-06-251-1/+3
| | | | | | Adding those two variables in order to share them across the tree. Signed-off-by: Petr Štetiar <ynezz@true.cz>