aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/x86
Commit message (Collapse)AuthorAgeFilesLines
* x86: enable CONFIG_MMC_SDHCI_ACPI for x86_64Mengyang Li2020-12-031-0/+2
| | | | | | | | | | | | | | | | | | | | | Some x86_64 single board computer (including Atomic Pi) has onboard emmc, but requires CONFIG_MMC_SDHCI_ACPI driver to use or boot from it. Here is boot message for the mmc device [ 2.838008] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA [ 2.857536] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA [ 2.950019] mmc0: new HS200 MMC card at address 0001 [ 3.158271] mmcblk0: mmc0:0001 M52516 14.6 GiB [ 3.170290] mmcblk0boot0: mmc0:0001 M52516 partition 1 4.00 MiB [ 3.177191] mmcblk0boot1: mmc0:0001 M52516 partition 2 4.00 MiB [ 3.183963] mmcblk0rpmb: mmc0:0001 M52516 partition 3 4.00 MiB, \ chardev (248:0) Other lines changed in this config file are introduced by menuconfig. Signed-off-by: Mengyang Li <mayli.he@gmail.com>
* x86: generic: disable CONFIG_EFI_VARS Alberto Bursi2020-11-121-1/+1
| | | | | | | | | | | | | | | | | | | CONFIG_EFI_VARS has been disabled in 64bit x86 target in 2018 by the following commit b0a51dab8c5b8d40828a00b0c6d66450bf90f217 the same reasons apply to Generic target, so now it's disabled here too. Leaving it enabled is also blocking compile as a new symbol was added EFI_CUSTOM_SSDT_OVERLAYS that depends from CONFIG_EFI_VARS and the build system stops and waits for user input on what to do about it. The Legacy and Geode targets never had any EFI_xxx configs enabled so they don't have this issue Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
* x86: upgrade: make code comment appear as log linesYousong Zhou2020-11-111-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | The comment content can be useful for readers of both the log and code Previously when dd command "records in/out" messages are not filtered like now with get_image_dd, it's not clear that these messages are for extracting boot sectors. E.g. Before == upgrade: Reading partition table from bootdisk... 37+26 records in 37+26 records out == upgrade: Reading partition table from image... After == upgrade: Reading partition table from bootdisk... == upgrade: Extract boot sector from the image 37+26 records in 37+26 records out == upgrade: Reading partition table from image... Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* x86: upgrade: use get_image_ddYousong Zhou2020-11-111-5/+5
| | | | | | | Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3140 Reported-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Reviewed-By: Philip Prindeville <philipp@redfish-solutions.com>
* x86: upgrade: use v function for writting logsYousong Zhou2020-11-111-8/+8
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* x86: fix touching bootloader "upgraded" markYousong Zhou2020-11-021-1/+1
| | | | | | | | | | | | | | The mount point is "/tmp/boot", the path in the boot partition is "/boot/grub/upgraded". Origin of this mark b9c1cf16 ("x86: add preinit hook for bootloader upgrade") Fixes 32f675ca ("x86: fix grub-bios-setup fail during sysupgrade") Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3140 Reported-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: remove support for kernel 4.19Adrian Schmutzler2020-10-309-1920/+0
| | | | | | | We use 5.4 on all targets by default, and 4.19 has never been released in a stable version. There is no reason to keep it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: move CONFIG_F2FS_CHECK_FS to generic kernel configHauke Mehrtens2020-10-112-2/+0
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Move CONFIG_F2FS_FS_SECURITY to generic kernel configHauke Mehrtens2020-10-112-2/+0
| | | | | | | Move the CONFIG_F2FS_FS_SECURITY kernel configuration option to the generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: move F2FS_FS_XATTR and F2FS_STAT_FS symbols to genericDaniel Golle2020-10-092-3/+0
| | | | | | | | Similar to how it was already done for other filesystems' *_FS_XATTR kernel config symbols, also move CONFIG_F2FS_FS_XATTR=y and CONFIG_F2FS_STAT_FS=y to target/linux/generic. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: clean up XATTR config symbolsPaul Spooren2020-10-091-1/+0
| | | | | | | | | | | | | Extended attributes are required for overlayfs and have hence been long ago enabled for jffs2, but should be enabled unconditionally for all other filesystems which may potentially serve as overlayfs' upper directory. Previously it was inconsistently added in multiple targets. Add symbols to generic kernel config and remove all *_XATTR symbols from target configs. Signed-off-by: Paul Spooren <mail@aparcar.org> [keep things as they are for squashfs, improve commit message] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.4 to 5.4.63John Audia2020-09-061-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Manually merged: hack-5.4 230-openwrt_lzma_options.patch bcm27xx 950-0283-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch x86 011-tune_lzma_options.patch Remove upstreamed patches in collaboration with Ansuel Smith: ipq806x 093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch 093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch 093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch All other modifications made by update_kernel.sh Build-tested: bcm27xx/bcm2708, ipq806x, x86/64 Run-tested: ipq806x (R7800), x86/64 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [update commit message/tested] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: set WATCHDOG_CORE dependency in kmod-hwmon-sch5627Adrian Schmutzler2020-08-244-4/+0
| | | | | | | | | | | | | | | | | | For many target we have added CONFIG_WATCHDOG_CORE=y to the target config due to the following error: Package kmod-hwmon-sch5627 is missing dependencies for the following libraries: watchdog.ko However, actually the proper way appears to be setting the dependency for the kmod-hwmon-sch5627 package, as the error message demands. Do this in this patch and remove the target config entries added due to this issue. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: Move CONFIG_IONIC to generic kernel configHauke Mehrtens2020-08-101-1/+0
| | | | | | | It is deactivated everywhere, just set this in the generic config. Acked-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "procd: update to git HEAD"Daniel Golle2020-08-061-2/+16
| | | | | | This reverts commit e0e607f0d000e62c6af8d822d7c3f57c2a582136. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2020-08-061-16/+2
| | | | | | | | | | | 47a9f0d service: add method to query available container features afbaba9 initd: attempt to mount cgroup2 ead60fe jail: use pidns semantics also for timens 759e9f8 jail: make use of BLOBMSG_CAST_INT64 for OCI rlimits 83053b6 instance: add instances into unified cgroup hierarchy 16159bb jail: parse OCI cgroups resources Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: unify CONFIG_GPIO_SYSFS in kernel configsFelix Fietkau2020-08-064-4/+0
| | | | | | Enable it for all platforms Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel/pcengines-apu2: detect apuv4 boardMatthew Gyurgyik2020-07-061-0/+50
| | | | | | | | | | | | Upstream commit 3d00da1de3 ("platform/x86: pcengines-apuv2: detect apuv4 board") On 5.4, this module fails on APUv4 due to non-matching DMI data. With this patch, the module will match DMI data for the APUv4. Signed-off-by: Matthew Gyurgyik <matthew@gyurgyik.io> [include upstream patch description] Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: Update kernel 4.19 to version 4.19.131Hauke Mehrtens2020-07-041-1/+1
| | | | | | | | | | | | | Fixes: - CVE-2020-10757 The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was backported which needed some adaptations to other code. Run tested: ath79 Build tested: ath79 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86: Support Intel 10 Gigabit Ethernet CardsGregory L. Dietsche2020-06-271-1/+1
| | | | | | | Support Intel 10 Gigabit Ethernet Cards in x86/64 images by default. This ensures that systems with cards such as the Intel x520 will work properly. Signed-off-by: Gregory L. Dietsche <Gregory.Dietsche@cuw.edu>
* kernel: add pcengines-apu2 module descriptionFlorian Eckert2020-06-261-0/+17
| | | | | | | | Add a module description for the new pcengnies-apu2 device driver. This driver supports the front button and LEDs on the PC Engines APUv2/APUv3 boards. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* armvirt,x86: fix build breakage of crypto ccp modulePetr Štetiar2020-06-231-0/+1
| | | | | | | | | Upstream in commit f9f8f0c24203 ("crypto: ccp -- don't "select" CONFIG_DMADEVICES") removed dependency on CONFIG_DMADEVICES symbol which leads to build breakage of ccp crypto module, so fix this by adding that symbol back in the kernel config. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: bump 5.4 to 5.4.48Petr Štetiar2020-06-221-1/+1
| | | | | | | | | | | | | | | | Resolved merge conflict in the following patches: layerscape: 701-net-0213-dpaa2-eth-Add-CEETM-qdisc-support.patch ramips: 0013-owrt-hack-fix-mt7688-cache-issue.patch Refreshed patches, removed upstreamed patch: bcm63xx: 020-v5.8-mtd-rawnand-brcmnand-fix-hamming-oob-layout.patch Run tested: qemu-x86-64 Build tested: x86/64 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* treewide: drop shebang from non-executable target filesAdrian Schmutzler2020-06-166-7/+0
| | | | | | | | | | | | | | This drops the shebang from all target files for /lib and /etc/uci-defaults folders, as these are sourced and the shebang is useless. While at it, fix the executable flag on a few of these files. This does not touch ar71xx, as this target is just used for backporting now and applying cosmetic changes would just complicate things. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: simplify inclusion of subtarget image filesAdrian Schmutzler2020-06-111-15/+1
| | | | | | | | | | | | | | Many target use a repetitive if-include scheme for their subtarget image files, though their names are consistent with the subtarget names. This patch removes these redundant conditions and just uses the variable for the include where the target setup allows it. For sunxi, this includes a trivial rename of the subtarget image Makefiles. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: add gpio-it87Florian Eckert2020-06-032-2/+2
| | | | | | | | | | | | | | | Since commit 910df3f06cc902ca2cb0ca8e963e9354c930df1a we have build in on all X86/64 platforms the gpio-it87 driver. Since this change I am getting the following error message on boot. > kern.err kernel: [ 1.009416] gpio_it87: no device I do not have this device on my system. To prevent the nonsensical message and the loading of the module I have added this as a package, so that it can be installed later or during image building. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
* x86: fix generic kernel 5.4 configAlberto Bursi2020-05-202-12/+13
| | | | | | | | | | | | | | The last kernel update done with commit 500a02bc29b9 ("x86: Update configuration") placed most of the updated config only in the x86_64 target. Move the options needed by the other targets too in the x86 base config, and add an additional option needed by those targets. Fixes: 500a02bc29b9 ("x86: Update configuration") Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com> [commit subject/description tweaks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: fix unusable squashfs images by adding missing paddingPetr Štetiar2020-04-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was reported, that after image generation rework x86-64-generic-squashfs-rootfs.img image won't boot on XenServer x86_64 anymore: F2FS-fs (xvda): Magic Mismatch, valid(0xf2f52010) - read(0x84289960) F2FS-fs (xvda): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (xvda): Magic Mismatch, valid(0xf2f52010) - read(0x4e8ee223) F2FS-fs (xvda): Can't find valid F2FS filesystem in 2th superblock List of all partitions: ca00 4207 xvda driver: vbd No filesystem could mount root, tried: ext3 ext2 ext4 squashfs iso9660 f2fs Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(202,0) So lets fix this by adding back padding which was introduced in commit a17d9482f5e2 ("x86: image: fix small disk space in squashfs overlay"). Ref: FS#3036 Fixes: 258f070d1a4f ("x86: fix missing squashfs and ext4 rootfs images") Fixes: cb007a7bf619 ("x86: switch image generation to new code") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: really remove packages already enabled in kconfigDaniel Golle2020-04-201-4/+3
| | | | | | | | | This commit really removes packages in geode profiles already enabled in kernel config. Fixes: 9c23ecee57 ("x86: move packages selection to profiles") Reported-by: Tomasz Maciej Nowak <tomek_n@o2.pl> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: move packages selection to profilesTomasz Maciej Nowak2020-04-203-12/+2
| | | | | | | | | | This can be rather confusing for contributors, since there are three layers in which they can be added. As for now there are none profiles other than generic (exception: geos) let's move them to these profiles. Being here this commit also removes packages in geode profiles already enabled in kernel config. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* x86: select kmod-button-hotplug by defaultTomasz Maciej Nowak2020-04-204-5/+3
| | | | | | | This package is useful by all subtargets, therefore move it to default packages selection. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* x86: fix kmod-forcedeth package selectionTomasz Maciej Nowak2020-04-203-3/+3
| | | | | | | | There's no such package as forcedeth, threfore the driver is never selected. Fix it by properly specifying package name. Fixes: 35f208d ("x86: add nforce eth to default packages") Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* x86: image: drop dead codeTomasz Maciej Nowak2020-04-201-8/+0
| | | | | | | These are remnants of old image generation code, which now serve no purpose. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* x86: append metadata to combined imagesPaul Spooren2020-04-141-4/+4
| | | | | | | | | | | | Now that the x86 target uses the new image generation code we can also attach metadata to the created images. As currently the `SUPPORTED_DEVICES` list is empty, no JSON metadata is attached, however the signing happens in the same step. This results in signature verification for x86 images. Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: add nforce eth to default packagesAlberto Bursi2020-04-133-3/+4
| | | | | | | | | | | | | forcedeth is necessary to use the integrated ethernet controller of Nvidia nForce chipset. There are PC motherboards with this chipset from 2001 that run 32bit Athlon XP CPUs and more modern ones up to 2009 that can run Intel and AMD 64bit processors, so add this to all non-geode x86 targets. Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
* x86: add genisoimage and xorrisofs as alternatives to mkisofs李国2020-04-091-2/+5
| | | | | | | | Some system not have mkisofs, but have genisoimage or xorrisofs. They have compatable options for mkisofs, so let them as alternatives to mkisofs. Signed-off-by: 李国 <uxgood.org@gmail.com>
* x86: fix grub-bios-setup fail during sysupgrade李国2020-04-092-1/+4
| | | | | | | | | | grub-bios-setup requires two images (boot.img and core.img), but they are missing. This make an error during sysupgrade: Upgrading bootloader on /dev/sda... grub-bios-setup: error: cannot open `/tmp/boot/boot/grub/boot.img': No such file or directory. Signed-off-by: 李国 <uxgood.org@gmail.com>
* x86/64: add cdrom and iso9660 drivers李国2020-03-312-0/+8
| | | | | | | The iso image need cdrom and iso9660 drivers to boot, otherwise it will hang when mounting the root file system Signed-off-by: 李国 <uxgood.org@gmail.com>
* x86: generate EFI platform bootable images李国2020-03-318-18/+83
| | | | | | | | | | | | | | | | | Add EFI platform bootable images for x86 platforms. These images can also boot from legacy BIOS platform. EFI System Partition need to be fat12/fat16/fat32 (not need to load filesystem drivers), so the first partition of EFI images are not ext4 filesystem any more. GPT partition table has an alternate partition table, we did not generate it. This may cause problems when use these images as qemu disk (kernel can not find rootfs), we pad enough sectors will be ok. Signed-off-by: 李国 <uxgood.org@gmail.com> [part_magic_* refactoring, removed genisoimage checks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* grub2: make some change to add efi platform support李国2020-03-311-5/+4
| | | | | | | | 1.generate boot image at Package/install section 2.move boot image to $(STAGING_DIR_IMAGE)/grub2/ 3.add efi variant to support efi platform Signed-off-by: 李国 <uxgood.org@gmail.com>
* x86: fix missing squashfs and ext4 rootfs imagesPaul Spooren2020-03-281-2/+4
| | | | | | | | | | | | | | | The previous rework of x86 image creation done in commit cb007a7bf619 ("x86: switch image generation to new code") removed images of separate squashfs and ext4 filesystems which are handy for example in testing under QEMU. So this patch adds back creation of those missing rootfs images for ext4 and squashfs based filesystems. Fixes: cb007a7bf619 ("x86: switch image generation to new code") Signed-off-by: Paul Spooren <mail@aparcar.org> [commit subject and description tweaks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: fix padding in imagesPaul Spooren2020-03-281-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous rework of x86 image creation done in commit cb007a7bf619 ("x86: switch image generation to new code") broke the padding in images. sda: p2 size 212992 extends beyond EOD, enabling native capacity sda: p2 size 212992 extends beyond EOD, truncated sd 0:0:0:0: [sda] Attached SCSI disk SQUASHFS error: squashfs_read_data failed to read block 0x2cc556 unable to read id index table VFS: Cannot open root device "PARTUUID=ac5c9cd8-02" or unknown-block(8,2): error -5 Please append a correct "root=" boot option; here are the available partitions: 0800 19761 sda driver: sd 0801 16384 sda1 ac5c9cd8-01 0802 2865 sda2 ac5c9cd8-02 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,2) Tested with x86/64 with Docker (squashfs), qemustart (ext4/squashfs) and virtualbox (ext4/squashfs). Ref: FS#2935 Fixes: cb007a7bf619 ("x86: switch image generation to new code") Suggested-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Paul Spooren <mail@aparcar.org> [commit subject and description tweaks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86/geode: fixup FEATURE inheritancePaul Spooren2020-03-231-1/+1
| | | | | | | | | | | | In the geode subtarget all default x86 features were overwritten via := instead of extending them via +=. This patch fixes the inheritance and thereby the compilation of x86/geode target. Compile tested x86/geode. Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86/geode: add missing include after rebasePaul Spooren2020-03-231-0/+4
| | | | | | | | | | | | | The x86 image generation was refacted via cb007a7bf6 and accidently not included `geode.mk` when selected as subtarget. Now the file is included and image compilation for x86/geode works again. Thanks to Russell Senior <russell@personaltelco.net> for reporting the problem and suggesting a patch! Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: geode/legacy: fix missing watchdog core dependenciesChristian Lamparter2020-03-224-0/+4
| | | | | | | | | | | | | | | | | This patch follows the other patches that added the watchdog core to various (armvirt, malta, ath79, ...) targets that have been hit by the following build error: Package kmod-hwmon-sch5627 is missing dependencies for the following libraries: watchdog.ko In theory, we could have just added the CONFIG_WATCHDOG_CORE=y to the Kconfig variable of kmod-hwmon-sch5627's package definition. This would have forced the watchdog core to be builtin and less architectures would need to be updated. But we might as well follow through here. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: allow non gzipped imagesPaul Spooren2020-03-211-1/+6
| | | | | | | | | The previous image generation code would always gzipped images. This patch changes the behaviour and only compresses images when selected in menuconfig. Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: use qemu-image command from image-commands.mkPaul Spooren2020-03-211-12/+2
| | | | | | | | | | | The `qemu-image` command converts images to the specified type and reduces redundant code. Adaption from Alexander Couzens <lynxis@fe80.eu> work[0]. [0]: https://git.openwrt.org/?p=openwrt/staging/lynxis.git;a=blob;f=target/linux/x86/image/Makefile;h=83b8140b7aefbe708fd09c9c61827e7e39bda8b4;hb=416cccf398e9589e3de386e05b61b1c46cace20d#l51 Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: remove obsolete legacy profilesPaul Spooren2020-03-215-91/+0
| | | | | | | | Rely on device profiles instead for packages selection. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [rebase, adjusted commit title] Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: switch image generation to new codePaul Spooren2020-03-219-110/+118
| | | | | | | | | | | | | | | | | | | | | | | | This commit introduces few related changes which need to be done in single commit to keep images buildable between git revisions. In result it retains all previous image creation possibilities with slight name change of generated images. Brief summary of the commit: * Split up image generation recipe to smaller chunks to make it more generic and reusable. * Make iso images x86 specific and drop their definition as root filesystem. * Convert image creation process to generic code specified in image.mk. * Make geode subtarget inherit features from the main target instead of redefining them. * For subtargets create device definitions with basic packages set. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [rebased] Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86/grub2: move grub2 image creation to packagePaul Spooren2020-03-212-23/+8
| | | | | | | | | | | Let the grub2 package take care of creating installable grub2 images, this will allow creating grub2 images without first calling x86 image generation recipe. Also as side effect, since those images are now shared, it'll reduce the number of calling grub-mkimage. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [rebase, adjusted commit title] Signed-off-by: Paul Spooren <mail@aparcar.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-01 03:35:13 +0000