aboutsummaryrefslogtreecommitdiffstats
path: root/package/base-files
Commit message (Collapse)AuthorAgeFilesLines
* base-files: fix configuration generation of network if "bridge" existsINAGAKI Hiroshi2021-05-241-2/+3
| | | | | | | | | | | | | | | | After the commit 43fc720657c6e3b30c6ed89d7227ee6e646c158b ("base-files: generate "device UCI type section for bridge"), the wrong network configuration is generated for the devices that already have the bridge device section for VLAN, such as the devices in realtek target. As a result, the bridge device by additional "device" section is specified to the "ports" option in the "bridge-vlan" section and netifd shuts down the switch and the ethernet when the network service started. Fixes: 43fc720657 ("base-files: generate "device" UCI type section for bridge") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rmilecki: use $ports for generate_bridge_vlan argument] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: support setting bridge MAC addressRafał Miłecki2021-05-241-0/+2
| | | | | Fixes: 43fc720657c6 ("base-files: generate "device" UCI type section for bridge") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Revert "base-files: migrate old UCI network bridge ports syntax"Rafał Miłecki2021-05-201-23/+0
| | | | | | | | | This reverts commit f716c30241d5fd9d821560f58d0af0c3ffe78600. Migrating everyone to the new syntax could break downgrades. We may reintroduce it way later if needed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: generate bridge device sections with br- name prefixRafał Miłecki2021-05-201-2/+2
| | | | | | | | | | | Missing br- prefix could result in name conflict between DSA port interface and bridge interface. Some devices with just one LAN port use "lan" interface name for DSA port. Trying to create bridge with the same "lan" name was failing. Reported-by: David Bauer <mail@david-bauer.net> Fixes: 43fc720657c6 ("base-files: generate "device" UCI type section for bridge") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* busybox: preserve crontabsPhilip Prindeville2021-05-191-1/+0
| | | | | | | | | | | | /etc/syslog.conf is used by sysklogd, and /etc/crontabs is used by crond, both features of busybox. Given this, ownership for these files should be bound to busybox, especially if one day there's a way to do an in-place opkg update of busybox. There's also the busybox provided syslogd which uses this file if CONFIG_BUSYBOX_FEATURE_SYSLOGD_CFG is set. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* base-files: migrate old UCI network bridge ports syntaxRafał Miłecki2021-05-181-0/+23
| | | | | | | | netifd has been recently patched to use more accurate "ports" option instead of "ifname". This is a simple translation between two UCI options. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: generate "device" UCI type section for bridgeRafał Miłecki2021-05-181-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This switches from the old way of defining bridges in an "interface" UCI section type (that should be used for layer 3 only). From now a defualt board switch will have its own "device" UCI section type. It's a new & preferred way of defining L2 devices. Before: config interface 'lan' option type 'bridge' option ifname 'lan1 lan2 lan3 lan4' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' After: config device option name 'lan' option type 'bridge' list ports 'lan1' list ports 'lan2' list ports 'lan3' list ports 'lan4' config interface 'lan' option ifname 'lan' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: use "ports" array in board.json network for bridgesRafał Miłecki2021-05-182-7/+20
| | | | | | | | | | | | | | | | | | | | | | | | | Bridge aggregates multiple ports so use a more accurate name ("ports") and format (array) for storing them in board.json. Example: "network": { "lan": { "ports": [ "lan1", "lan2", "lan3", "lan4" ], "protocol": "static" }, "wan": { "ifname": "wan", "protocol": "dhcp" } } Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: change logging for upgrade on fwtoolFlorian Eckert2021-05-171-3/+3
| | | | | | | | | Remove vn call in favour of v call. This commit serves as preparation for removing the v function call. Signed-off-by: Florian Eckert <fe@dev.tdt.de> [alter slightly to prevent double space after colon] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: introduce $(MKHASH)Leonardo Mörlein2021-05-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, it was assumed that mkhash is in the PATH. While this was fine for the normal build workflow, this led to some issues if make TOPDIR="$(pwd)" -C "$pkgdir" compile was called manually. In most of the cases, I just saw warnings like this: make: Entering directory '/home/.../package/gluon-status-page' bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found [...] While these were only warnings and the package still compiled sucessfully, I also observed that some package even fail to build because of this. After applying this commit, the variable $(MKHASH) is introduced. This variable points to $(STAGING_DIR_HOST)/bin/mkhash, which is always the correct path. Signed-off-by: Leonardo Mörlein <me@irrelefant.net>
* base-files: shinit: properly handle dashes in service namesJo-Philipp Wich2021-05-121-1/+1
| | | | | Fixes: FS#3801 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: upgrade: take down loop and LVM before upgradeDaniel Golle2021-05-051-0/+10
| | | | | | | | | | | | | | Users of devices with large block storage may choose to have an LVM partition on the same device which is used for booting OpenWrt. The presents a problem during sysupgrade as the root device is then still busy and changing partitions will not work as desired, leading to data corruption in case the newly flashed image is larger than the currently installed one. Having loop devices setup causes similar havoc. Make sure all volume groups are offline and all loop devices have been released before sysupgrade. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: fix status display commandAlexander Egorenkov2021-04-031-1/+1
| | | | | | | | | | | | | | | | | | | | If service() is called w/o parameter then the status display for services with multiple instances is incorrect. E.g. samba4 or wpad have 2 instances. root@OpenWrt:~# /etc/init.d/samba4 status running root@OpenWrt:~# /etc/init.d/wpad status running Before change: /etc/init.d/samba4 enabled stopped /etc/init.d/wpad enabled stopped After change: /etc/init.d/samba4 enabled running /etc/init.d/wpad enabled running Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net>
* base-files: functions: introduce new helper functionsDaniel Golle2021-03-312-63/+68
| | | | | | | | | | | Introduce cmdline_get_var() to /lib/function.sh and make use of it in export_rootdev() in /lib/upgrade/common.sh, making the code more simple and removing one level of indentation. Introduce get_partition_by_name() to /lib/upgrade/common.sh which is useful on non-EFI GPT platforms like mt7622. Remove some dead-code while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: add logging for configuration importFlorian Eckert2021-03-211-0/+1
| | | | | | Make sysupgrade backup import more verbose. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* treewide: remove execute bit and shebang from board.d filesAdrian Schmutzler2021-03-062-2/+1
| | | | | | | | | | | | | | | | So far, board.d files were having execute bit set and contained a shebang. However, they are just sourced in board_detect, with an apparantly unnecessary check for execute permission beforehand. Replace this check by one for existance and make the board.d files "normal" files, as would be expected in /etc anyway. Note: This removes an apparantly unused '#!/bin/sh /etc/rc.common' in target/linux/bcm47xx/base-files/etc/board.d/01_network Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: add new application led trigger backendFlorian Eckert2021-03-051-4/+5
| | | | | | | | | | | | | | | | | For now we have only kernel LED trigger support. With this change it is now possible to use application triggers. If we configure a LED with a non kernel trigger, then we check on every restart and boot of the LED service if we have this trigger as an application in "/usr/libexec/led-trigger". If this file with the name is found, then we execute this to init the LED. Possible use cases are: - Start/Stop/Restart an application led trigger service for this led - Init a LED that is configured by a hotplug script (VPN tunnel established) Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* treewide: fix spelling 'seperate' -> 'separate'Daniel Golle2021-02-281-1/+1
| | | | | | | This popular spelling mistake was also introduced by myself lately. Fix it everywhere. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: add support for restoring config from tmpfsDaniel Golle2021-02-281-2/+3
| | | | | | | | Instead of only relying in /sysupgrade.tgz being present in rootfs to restore configuration, also grab /tmp/sysupgrade.tar which may have magically gotten there during preinit... Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: remove unneeded '$' signs in nand.shDaniel Golle2021-02-241-2/+2
| | | | | | | When using Shell arithmetric evaluation via $((..)) the variables in the expression do not need to be prefixed by the '$' sign. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sysupgrade-nand: allow limiting rootfs_data by setting env variableDaniel Golle2021-02-241-4/+16
| | | | | | | | | | | | | | | | | Check if firmware environment variable 'rootfs_data_max' exists and is set to a numerical value greater than 0. If so, limit rootfs_data volume to that size instead of using the maximum available size. This is useful on devices with lots of flash where users may want to have eg. a volume for persistent logs and statistics or for external applications/containers. Persistence on rootfs overlay is limited by the size of memory available during the sysugprade process as that data needs to be copied to RAM while the volume is being recreated during sysupgrade. Hence it is unsuitable for keeping larger amounts of data accross upgrade which makes additional volume(s) for application data desirable. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* image: add support for building FIT image with filesystemDaniel Golle2021-02-241-37/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow for single (external-data) FIT image to hold kernel, dtb and squashfs. In that way, the bootloader verifies the system integrity including the rootfs, because what's the point of checking that the hash of the kernel is correct if it won't boot in case of squashfs being corrupted? Better allow bootloader to check everything needed to make it at least up to failsafe mode. As a positive side effect this change also makes the sysupgrade process on nand potentially much easier as it is now. In short: mkimage has a parameter '-E' which allows generating FIT images with 'external' data rather than embedding the data into the device-tree blob itself. In this way, the FIT structure itself remains small and can be parsed easily (rather than having to page around megabytes of image content). This patch makes use of that and adds support for adding sub-images of type 'filesystem' which are used to store the squashfs. Now U-Boot can verify the whole OS and the new partition parsers added in the Linux kernel can detect the filesystem sub-images, create partitions for them, and select the active rootfs volume based on the configuration in FIT (passing configuration via device tree could be implemented easily at a later stage). This new FIT partition parser works for NOR flash (on top of mtdblock), NAND flash (on top of ubiblock) as well as classic block devices (ie. eMMC, SDcard, SATA, NVME, ...). It could even be used to mount such FIT images via `losetup -P` on a user PC if this patch gets included in Linux upstream one day ;) Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: use hwclock --systzRosen Penev2021-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The date -k patch is non standard and will be removed in the next commit. Tested behavior to be identical with a simple C program: #define _GNU_SOURCE #include <unistd.h> #include <stdio.h> #include <sys/time.h> #include <sys/syscall.h> int main() { struct timezone tt; struct timezone tz; int a = syscall(SYS_gettimeofday, NULL, &tt); int b = gettimeofday(NULL, &tz); printf("%d - %d, %d\n", a, tt.tz_minuteswest, tt.tz_dsttime); printf("%d - %d, %d\n", b, tz.tz_minuteswest, tz.tz_dsttime); } Signed-off-by: Rosen Penev <rosenp@gmail.com>
* base-files: mount pstore if presentBrian Norris2021-01-291-0/+1
| | | | | | | | Pstore (persistent store) can be used to stash debug information (kernel console, panics, ftrace) across reboots or crashes. If the filesystem is present, mount it. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* base-files: remove execute bit and shebang from functions.shAdrian Schmutzler2021-01-291-1/+0
| | | | | | | | | | | /lib/functions.sh was executable for no obvious reason and its execute property was even checked in package-ipkg.mk just to source it afterwards. Remove the execute bit and shebang as this is clearly a library. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
* treewide: drop shebang from non-executable lib filesAdrian Schmutzler2021-01-2916-20/+0
| | | | | | | | | | | | This drops the shebang from another bunch of files in various /lib folders, as these are sourced and the shebang is useless. Fix execute bit in one case, too. This should cover almost all trivial cases now, i.e. where /lib is actually used for library files. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: bump Copyright to 2021Paul Spooren2021-01-261-1/+1
| | | | | | | | | | This commit is only added to keep the PKG_RELEASE correct after fixing the $(COMMITCOUNT) logic in the previous commit. This way the PKG_RELEASE stays the same while the compiled packages content isn't changed. Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: use $(COMMITCOUNT) in PKG_RELEASEPaul Spooren2021-01-221-1/+1
| | | | | | | | | The newly added `$(COMMITCOUNT)` varialbe allows automatic versioning based on the number of Git commits of a package. Replace *tedious to bump* and *merge conflict causing* `PKG_RELEASE` and replace it with `$(COMMITCOUNT)`. Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: read all 3 bytes in get_magic_vfat() at onceAdrian Schmutzler2021-01-072-2/+2
| | | | | | | While the speed improvement might be negligible, there is still no reason to read individual bytes. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: wifi: add support for 802.11adDaniel Golle2021-01-052-1/+2
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86/efi: add FAT32 esp mounting supportKagurazaka Kotori2021-01-031-1/+6
| | | | | | | | | Adds a new function get_magic_fat32() in base-files to read FAT32 magic. Now FAT32 EFI system partition can be handled in the same way as FAT12/FAT16. Signed-off-by: Kagurazaka Kotori <kagurazakakotori@gmail.com> [replace '-o' with '] || [' to satisfy shellsheck] Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: allow reusing of boolean value extraction logicOldřich Jedlička2021-01-012-6/+13
| | | | | | | | | | | | | | | | | | | The `functions.sh` script has `config_get_bool()` function, which is usable when using UCI config direct access API, but there is no equivalent for the callback API. Introduce `get_bool()` function to allow reusing it from init scripts. Example: ```sh option_cb() { local option="$1" local value="$(get_bool "$2")" ... } ``` Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
* base-files: sysupgrade: add function for conffiles retrievalAdrian Schmutzler2020-12-302-8/+13
| | | | | | | | | | | | The find command to retrieve files from /etc/sysupgrade.conf and /lib/upgrade/keep.d/* is used twice in almost the same way. Move it into a function to consolidate, enhance readability and make future adjustments easier. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Paul Spooren <mail@aparcar.org> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
* base-files: drop banner.failsafe if failsafe is disabledPiotr Dymacz2020-12-221-1/+4
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* base-files: flush kernel memory cache during sysupgradeHannu Nyman2020-12-222-0/+2
| | | | | | | | | | | Flush kernel memory caches during sysupgrade in order to mitigate the impact from memory consumption spikes in low-RAM devices. This may help to prevent sysupgrade causing a reboot before the actual flashing starts. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* base-files: upgrade: fix initramfs detectionRobert Marko2020-12-202-2/+2
| | | | | | | | | | | | | | | Commit "initramfs: switch to tmpfs to fix ujail" switched initramfs to now use tmpfs, it causes $(rootfs_type) to now return tmpfs when running initramfs image instead of being empty. This broke initramfs detection which prevents config files from being saved as it does not work from initramfs. So, lets test for $(rootfs_type) returning "tmpfs" instead. Fixes: 7fd3c68 ("initramfs: switch to tmpfs to fix ujail) Signed-off-by: Robert Marko <robimarko@gmail.com>
* package/base-files: caldata: use dd iflag fullblockJohn Thomson2020-12-112-13/+26
| | | | | | | | | | | | | | | | This dd flag ensures that the requested size is retrieved from pipes or special filesystems (if available). Without this flag, on multi-core systems, Piped or special filesystem data can be truncated when a size greater than PIPE_BUF is requested. Fixes: FS#3494 Fixes: 7557e7f ("package/base-files: caldata: work around dd's limitation") Cc: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* base-files: informative service command in /etc/shinit. service command ↵Stan Grishin2020-12-032-6/+18
| | | | | | | | | | | | | | shows services enabled/disabled and running status, when the service command is invoked with no/invalid arguments, like this: Usage: service <service> [command] The following services are available: /etc/init.d/acme enabled stopped /etc/init.d/boot enabled stopped /etc/init.d/cron enabled running /etc/init.d/dnsmasq enabled running ... Signed-off-by: Stan Grishin <stangri@melmac.net>
* base-files: allow setting device and bridge macsJohn Crispin2020-12-022-9/+42
| | | | | | | | | Add code for setting mac addresses inside board.json and rendering them out to uci. On switches we want to have a unique MAC on each port. With 48 port switches that would require 48 device sections in /etc/config/network. Doing so via board.json is easier. Signed-off-by: John Crispin <john@phrozen.org>
* base-files: fix alias more to properly detect /usr/bin/moreHuangbin Zhan2020-11-281-1/+1
| | | | | | Package more is installed to /usr/bin rather than /bin. Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
* base-files: merge /etc/passwd on rw-rootfsImran Khan2020-11-272-4/+6
| | | | | | | | | Support installations without root-overlayfs (and hence without /rom) when migrating user accounts. Signed-off-by: Imran Khan <gururug@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [simplified patch, bumped PKG_RELEASE, cleaned message]
* base-files: functions.sh: replace [^...] with [!...] in caseRosen Penev2020-11-251-1/+1
| | | | | | | | | | | | | | | | Strictly speaking, ash does not support it. From https://wiki.ubuntu.com/DashAsBinSh#A.5B.5E.5D Not to be confused by sed's and other program's regular expression syntax. Uses of [^...] in case (parameter/word expansion in general) need to be replaced with [!...]. Found with shellcheck: https://github.com/koalaman/shellcheck/wiki/SC2169 Signed-off-by: Rosen Penev <rosenp@gmail.com> [minor commit title/message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: generated named bridge-vlan sectionsJohn Crispin2020-11-191-7/+8
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* base-files: fix backwards compatiblity of rc.common EXTRA_COMMANDSMatthias Schiffer2020-11-172-7/+8
| | | | | | | | | | | | | | Avoid needlessly breaking old initscripts that set EXTRA_COMMANDS. This will aid in debugging (as it simplifies reverting to an older version of a package) and unbreaks third-party feeds (and packages that maintain their OpenWrt initscripts as part of the software's repo instead of the OpenWrt feed like fastd). Without this, initscripts that set EXTRA_COMMANDS become completely unusable, as all default commands like start/stop cease working. Fixes: 1a69f50dc627 ("base-files: fix rc.common help alignment") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: bump PKG_RELEASEYousong Zhou2020-11-111-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* base-files: upgrade: stage2: use v for log linesYousong Zhou2020-11-111-7/+7
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* base-files: upgrade: fwtool.sh: rewording logsYousong Zhou2020-11-111-2/+2
| | | | | | | | | | The intent is to make it sound more like info level message, not some error like "404 not found". x86 target at the moment makes image with only signature but no metadata (ref commit f8141216 "x86: append metadata to combined images"). Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Reviewed-By: Philip Prindeville <philipp@redfish-solutions.com>
* base-files: upgrade: fwtool.sh: use v for log linesYousong Zhou2020-11-111-13/+13
| | | | | | | | | This will have at least the following effects - Log lines will have common prefix - They will be output to stderr instead of stdout Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* base-files: upgrade: add get_image_dd()Yousong Zhou2020-11-111-0/+11
| | | | | | | | | | This is mainly to handle stderr message "Broken pipe", "F+P records in/out" by common pattern "xcat | dd .." Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3140 Reported-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Reviewed-By: Philip Prindeville <philipp@redfish-solutions.com>
* base-files: upgrade: use stdin redirection to replace cat commandYousong Zhou2020-11-111-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 07:16:42 +0000