diff options
Diffstat (limited to 'os/hal/platforms/STM32/i2c_lld.c')
| -rw-r--r-- | os/hal/platforms/STM32/i2c_lld.c | 21 |
1 files changed, 17 insertions, 4 deletions
diff --git a/os/hal/platforms/STM32/i2c_lld.c b/os/hal/platforms/STM32/i2c_lld.c index 65cdec1b3..68e42972c 100644 --- a/os/hal/platforms/STM32/i2c_lld.c +++ b/os/hal/platforms/STM32/i2c_lld.c @@ -112,12 +112,25 @@ static void i2c_serve_event_interrupt(I2CDriver *i2cp) { if ((i2cp->id_state == I2C_READY) && (i2cp->id_i2c->SR1 & I2C_SR1_SB)){// start bit sent i2cp->id_state = I2C_MACTIVE; - //TODO: 10 bit address handling - i2cp->id_i2c->DR = (i2cp->id_slave_config->addr7 << 1) | + /*TODO: 10 bit address handling + In 10-bit addressing mode, + – To enter Transmitter mode, a master sends the header (11110xx0) and then the + slave address, (where xx denotes the two most significant bits of the address). + – To enter Receiver mode, a master sends the header (11110xx0) and then the + slave address. Then it should send a repeated Start condition followed by the + header (11110xx1), (where xx denotes the two most significant bits of the + address). + The TRA bit indicates whether the master is in Receiver or Transmitter mode.*/ + + i2cp->id_i2c->DR = (i2cp->id_slave_config->address << 1) | i2cp->id_slave_config->rw_bit; // write slave address in DR return; } + if ((i2cp->id_state == I2C_MACTIVE) && (i2cp->id_i2c->SR1 & I2C_SR1_ADD10)){// header sent + + } + // "wait" interrupt with ADDR flag if ((i2cp->id_state == I2C_MACTIVE) && (i2cp->id_i2c->SR1 & I2C_SR1_ADDR)){// address successfully sent if(i2cp->id_i2c->SR2 & I2C_SR2_TRA){ @@ -468,7 +481,7 @@ void i2c_lld_master_transmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg, bool_t re i2cp->id_i2c->CR1 |= I2C_CR1_START; // generate start condition while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB)); // wait Address sent - i2cp->id_i2c->DR = (i2cp->id_slave_config->addr7 << 1) | I2C_WRITE; // write slave addres in DR + i2cp->id_i2c->DR = (i2cp->id_slave_config->address << 1) | I2C_WRITE; // write slave addres in DR while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR)); // wait Address sent i = i2cp->id_i2c->SR2; i = i2cp->id_i2c->SR1; //i2cp->id_i2c->SR1 &= (~I2C_SR1_ADDR); // clear ADDR bit @@ -505,7 +518,7 @@ void i2c_lld_master_receive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg) { uint16_t i = 0; // send slave addres with read-bit - i2cp->id_i2c->DR = (i2cp->id_slave_config->addr7 << 1) | I2C_READ; + i2cp->id_i2c->DR = (i2cp->id_slave_config->address << 1) | I2C_READ; while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR)); // wait Address sent i = i2cp->id_i2c->SR2; |