aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
...
* wireguard: Add support for ip6prefix config optionToke Høiland-Jørgensen2018-05-151-0/+6
| | | | | | | | | | | | This makes it easier to distribute prefixes over a wireguard tunnel interface, by simply setting the ip6prefix option in uci (just like with other protocols). Obviously, routing etc needs to be setup properly for things to work; this just adds the config option so the prefix can be assigned to other interfaces. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
* linux-firmware: Add firmware for usb-serial-ti-usbDavid Woodhouse2018-05-151-0/+13
| | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* mac80211: refactor non-{sae,dfs} mesh initializationDaniel Golle2018-05-152-47/+48
| | | | | | | | | | | | Refactor mesh initialization into a separate function, do some cleaning on the way to make the code more readable. Changes: * Move iw mesh setup to new mac80211_setup_mesh() * fallback on 'ssid' parameter in case 'mesh_id' isn't set * move setting of freq variable to shared code as it is needed for both, the wpa_supplicant and the iw based setup. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: fix VHT80 for encrypted mesh channel settingsSven Eckelmann2018-05-142-1/+46
| | | | | | | | | | | | | | | | | | | The max_oper_chwidth settings was parsed incorrectly for big endian system. This prevented the system to switch to VHT80 (or VHT160). Instead they were mapped to: * HT20: 20MHz * VHT20: 20MHz * HT40: 40MHz * VHT40: 40MHz * VHT80: 40MHz * VHT160: 40MHz This happened because each max_oper_chwidth setting in the config file was parsed as "0" instead of the actual value. Fixes: a4322eba2b12 ("hostapd: fix encrypted mesh channel settings") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* mac80211: Re-enable encrypted 11s meshpointSven Eckelmann2018-05-142-2/+2
| | | | | | | | | | The commit 574e4377fad5 ("mac80211: properly setup mesh interface") uses the variable $wpa to decide whether encrypted meshpoint is requested by the user or not. But the variable $wpa will only be set correctly after the function wireless_vif_parse_encryption is called. Fixes: 574e4377fad5 ("mac80211: properly setup mesh interface") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* mvebu: add support for WRT32X (venom)Michael Gray2018-05-141-1/+2
| | | | | | | | | | | | | | | | | | Linksys WRT32X (Venom) is identical in hardware to the WRT3200ACM with a different flash layout and boots zImage rather than uImage. Specification: - Marvell Armada 385 88F6820 (2x 1.8GHz) - 256MB of Flash - 512MB of RAM - 2.4GHz (bgn) and 5GHz (an+ac wave 2) - 4x 1Gbps LAN + 1x 1Gbps WAN - 1x USB 3.0 and 1x USB 2.0/eSATA (combo port) Flash instruction: Apply factory image via web-gui. Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
* firewall3: update to latest git HEADJohn Crispin2018-05-141-4/+4
| | | | | | | | b45e162 helpers: fix the set_helper in the rule structure f742ba7 helpers.conf: support also tcp in the CT sip helper 08b2c61 helpers: make the proto field as a list rather than one option Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: properly setup mesh interfaceDaniel Golle2018-05-142-4/+15
| | | | | | | Setup wpa_supplicant for encrypted mesh or when using DFS channels and adjust interface setup to pass fixed frequency for mesh mode. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: fix mesh+APDaniel Golle2018-05-1415-220/+171
| | | | | | | | Fix encrypted (or DFS) AP+MESH interface combination in a way similar to how it's done for AP+STA and fix netifd shell script. Refresh patches while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rpcd: update to lastest HEADJo-Philipp Wich2018-05-141-3/+3
| | | | | | | | 8206219 uci: fix memory leak in rpc_uci_replace_savedir() 10f7878 exec: close stdout and stderr streams on child signal 92d0d75 uci: use correct sort index when reordering sections Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wireguard: bump to 0.0.20180513Kevin Darbyshire-Bryant2018-05-141-2/+2
| | | | | | | | | | | | | | | | | | | 6b4a340 version: bump snapshot faa2103 compat: don't clear header bits on RHEL 4014532 compat: handle RHEL 7.5's recent backports 66589bc queueing: preserve pfmemalloc header bit 37f114a chacha20poly1305: make gcc 8.1 happy 926caae socket: use skb_put_data 724d979 wg-quick: preliminary support for go implementation c454c26 allowedips: simplify arithmetic 71d44be allowedips: produce better assembly with unsigned arithmetic 5e3532e allowedips: use native endian on lookup 856f105 allowedips: add selftest for allowedips_walk_by_peer 41df6d2 embeddable-wg-library: zero attribute padding 9a1bea6 keygen-html: add zip file example f182b1a qemu: retry on 404 in wget for kernel.org race Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: let kmod-rtl8366-smi conditionally depend on kmod-of-mdioJo-Philipp Wich2018-05-131-1/+1
| | | | | | | | | | | | We cannot depend on CONFIG_OF in the module definition context as this symbol is not defined for OpenWrt menuconfig. Depend on the targets that appear to need the kmod-of-mdio module instead. The target dependency list may not be complete, it is based on the build failures encountered by the build bots. Fixes: dc629d9cf5 ("kernel: fix kmod-switch-rtl8366-smi dependency") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dnsmasq: bump to 2.80test2Kevin Darbyshire-Bryant2018-05-1212-8/+1172
| | | | | | | | | | | | | | | | | | | Refresh patches and backport upstream to current HEAD: 1f1873a Log warning on very large cachesize config, instead of truncating it. 0a496f0 Do unsolicited RAs for interfaces which appear after dnsmasq startup. e27825b Fix logging in previous. 1f60a18 Retry SERVFAIL DNSSEC queries to a different server, if possible. a0088e8 Handle query retry on REFUSED or SERVFAIL for DNSSEC-generated queries. 34e26e1 Retry query to other servers on receipt of SERVFAIL rcode. 6b17335 Add packet-dump debugging facility. 07ed585 Add logging for DNS error returns from upstream and local configuration. 0669ee7 Fix DHCP broken-ness when --no-ping AND --dhcp-sequential-ip are set. f84e674 Be persistent with broken-upstream-DNSSEC warnings. Compile & run tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: add specific interface procd triggershux2018-05-112-2/+14
| | | | | | | | | | | | | | | | | | Right now interface.update events are sent out by netifd upon interface state, route, address (lifetime), prefix lifetime changes. Dnsmasq is only interested in interface state changes and currently adds an interface trigger for all the "interface.*" events. In combination with commit 23bba9cb330, which triggers a SIGHUP signal to dnsmasq, IPv6 address/prefix lifetime changes on the wan will trigger dnsmasq reloads which can become frequent in case of shorter lifetimes. To avoid frequent dnsmasq reload, this patch adds specific interface triggers. During dnsmasq init it loops dhcp uci section; if the value of the ignore option is set to 0, then the corresponding interface trigger is not installed. Otherwise, if the ignore option value is 1, then procd_add_interface_trigger is called which adds the interface trigger. Signed-off-by: hux <xinxing.huchn@gmail.com>
* kernel: fix kmod-switch-rtl8366-smi dependencyJohn Crispin2018-05-101-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: fix chipidea2 dependenciesJohn Crispin2018-05-091-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* nghttp2: bump to 1.32.0Hans Dedecker2018-05-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 572735e4 Update manual pages e8d693c3 Bump up version number to 1.32.0, LT revision to 30:2:16 f44dfcd9 Update AUTHORS 1f1b0d93 Update manual pages ce8c749b Merge pull request #1173 from nghttp2/asio-client-sni 3e4f257b asio: Support client side SNI 86fab997 Upgrade neverbleed to the latest master c3ecd445 Merge pull request #1171 from nghttp2/h2load-rate-and-duration c65ca20a h2load: -r and --duration are mutually exclusive a5c408c5 Ignore all input after calling session_terminate_session 06379b28 Fix treatment of padding e04de48e Merge pull request #1162 from nghttp2/libressl 00964642 Use LIBRESSL_IN_USE instead of defined(LIBRESSL_VERSION_NUMBER) 8d0b4544 libressl 2.7 has X509_VERIFY_PARAM_* d8a34131 libressl 2.7 has SSL_CTX_get0_certificate 5db17d0a Compile with libressl 2.7.2 1bf69b56 Define LIBRESSL_LEGACY_API and LIBRESSL_2_7_API 3febaef1 Bump up LT revision to 30:1:16 due to v1.31.1 release b1bd6035 Fix frame handling b48bcb21 examples: Use C style comment in .c files 6f3ce2c7 examples: Remove unused lambda capture 2f9121cf Merge branch 'Sp1l-Sp1l/allow-no-npn' e65e7711 Add comment on #endif 636ef51b Fix compile error with -Wunused-function 400934e5 [PATCH] Allow building without NPN 4c3a3acf Merge pull request #1146 from vszakats/cmakestaticlib 9aa6002c Merge pull request #1144 from hellojaewon/master f342260b cmake: add ENABLE_STATIC_LIB option to build static lib a6dd4970 Fix typo 842509da Don't allow 101 HTTP status code because HTTP/2 removes HTTP Upgrade 4add618a Bump up version number to 1.32.0-DEV Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kmod-sched-cake: bump to latest cake 2018-05-07Kevin Darbyshire-Bryant2018-05-081-3/+3
| | | | | | | | | | | | | | No functional change. Code tidy ups. 735eaf2 Make sure we don't reallocate q->tins (we didn't anyway but his really makes sure) 6c5ad6e Get rid of __GFP_NOWARN flag for memory allocation 2a37333 Don't need the wrapper for kvfree, and no need to check before calling it 2b1c631 Whitespace fix 7fe6e28 compat tidyup (for older kernel versions <4.4) 93b805c pedant tidy up superfluous semicolons on switch statements Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* igmpproxy: bump to 0.2.1Kevin Darbyshire-Bryant2018-05-0710-679/+4
| | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Point at github which is new, maintained location for igmpproxy. Remove all patches as all have been upstreamed. Closes FS#1456 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* igmpproxy: fix creation of firewall rulesJaap Buurman2018-05-073-9/+14
| | | | | | | | The init sccript for igmpproxy uses the option 'network' both as an interface name for fetching the l3_device name and for creating the firewall rules. This only works if the name of the network and firewall zone are identical. This commit introduces a new option 'zone' for configuring the upstream and downstream firewall zones in order for the init script to create the required firewall rules automatically. When no such options are given, the init script falls back to not creating the firewall rules and the user can opt to create these manually. Signed-off-by: Jaap Buurman <jaapbuurman@gmail.com>
* hostapd: add channel utilization as config optionNick Hainke2018-05-071-2/+7
| | | | | | Add the channel utilization as hostapd configuration option. Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: fix build error for external kernel.Sandeep Sheriker Mallikarjun2018-05-072-6/+15
| | | | | | | | | | fixed build error when external kernel is selected from menuconfig. The patches present in target/linux/generic does not gets applied to external kernel and build fails while compiling mac82011 & regmap-core kernel modules. as a fix added check in Makefile for CONFIG_EXTERNAL_KERNEL_TREE present or not. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* flock: enable alternatives supportYousong Zhou2018-05-072-3/+5
| | | | | | Fixes FS#1510 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* busybox: order alternatives in alphabetical orderYousong Zhou2018-05-071-4/+4
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* cake: bump to 20180504 bakeKevin Darbyshire-Bryant2018-05-071-3/+4
| | | | | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Cake is bearing fruits of kernel upstreaming efforts. diffserv-llt dropped. DSCP mapping paper died and no one using it. ack-filter re-written & simplified tc userspace & cake kmod netlink interface usage changed in non backwards compatible way, thus this once requires tc & cake to be in-step. Change due to upstream requirements. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* iproute2: import latest cakeKevin Darbyshire-Bryant2018-05-072-446/+425
| | | | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Bearing fruits of the latest upstreaming efforts on cake. Changes: diffserv-llt dropped. The paper describing this DSCP allocation has gone stale and doesn't appear used. The userspace to kernel netlink messages for cake have been reworked in a backwards incompatible way, so tc & cake must be bumped together this once. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* iproute2: backport json_print-fix-hidden-64-bit-type-promotionKevin Darbyshire-Bryant2018-05-072-1/+289
| | | | | | | | | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. print_uint() will silently promote its variable type to uint64_t, but there is nothing that ensures that the format string specifier passed along with it fits (and the function name suggest to pass "%u"). Fix this by changing print_uint() to use a native 'unsigned int' type, and introduce a separate print_u64() function for printing 64-bit values. All call sites that were actually printing 64-bit values using print_uint() are converted to use print_u64() instead. Since print_int() was already using native int types, just add a print_s64() to match, but don't convert any call sites. Fixes wonkyness in some stats from some qdiscs under tc Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ath79: add new OF only target for QCA MIPS siliconJohn Crispin2018-05-071-1/+46
| | | | | | | | This target aims to replace ar71xx mid-term. The big part that is still missing is making the MMIO/AHB wifi work using OF. NAND and mikrotik subtargets will follow. Signed-off-by: John Crispin <john@phrozen.org>
* krnel: The dm9000 module does not need to depend on pciJianhui Zhao2018-05-051-1/+1
| | | | Signed-off-by: Jianhui Zhao <jianhuizhao329@gmail.com>
* ca-certificates: Update to Version 20180409Christian Schoenebeck2018-05-051-2/+2
| | | | | | ca-certificates: Update to Version 20180409 Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* kernel: Remove AutoLoad for legacy usb gadget modulesChuanhong Guo2018-05-051-4/+3
| | | | | | | These modules usually require some special arguments to customize the emulated device and they should be loaded manually by users. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* at91: Add SAMA5D2 PTC EK boardSandeep Sheriker Mallikarjun2018-05-052-3/+31
| | | | | | | Add target device as at91-sama5d2_ptc_ek in SAMA5D2 subtarget and build images for SAMA5D2 PTC Ek board. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91: reorganize at91 subtargetsSandeep Sheriker Mallikarjun2018-05-052-10/+20
| | | | | | | | | | | reorganizing at91 subtargets based on sama5 soc features and this fix below problems. 1. able to set neon flags to sama5d2 & sama5d4 subtargets. 2. fix the make clean which removes all the subtargets in bin folder. 3. able to configure kernel specific to subtarget. 4. able to set vfpu4 flags to samad3 subtargets. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: fix DTC command not found.Sandeep Sheriker Mallikarjun2018-05-051-0/+2
| | | | | | | fixed DTC command not found error while compling uboot-at91. The fix is to set DTC PATH in uboot-at91 MAKE command. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91: Add SAMA5D27 SOM1 EK boardSandeep Sheriker Mallikarjun2018-05-052-2/+33
| | | | | | | Add support for SAMA5D27 SOM1 with target device as at91-sama5d27_som1_ek in SAMA5 subtarget and build images for SAMA5D27 SOM1 Ek board. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: fetch uboot src from u-boot-at91 githubSandeep Sheriker Mallikarjun2018-05-051-6/+11
| | | | | | | fetching uboot src from linux4sam/u-boot-at91 github for all at91 target. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91bootstrap:update to v3.8.10Sandeep Sheriker Mallikarjun2018-05-052-3/+3
| | | | | | updating to new version v3.8.10 and copying at91bootstrap.bin to bin folder. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* hostapd: fix a mesh mode crash with CONFIG_TAXONOMY enabledFelix Fietkau2018-05-031-0/+23
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* samba36: add hotplug supportRosy Song2018-05-023-0/+114
| | | | | | | | Add hotplug handle script for storage devices, this will add corresponding option in the /etc/config/samba file automatically. Signed-off-by: Rosy Song <rosysong@rosinson.com>
* libusb: Add SourceForge mirror.Rosen Penev2018-05-021-1/+3
| | | | | | SourceForge is still getting updated so might as well have it here. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* iproute2: update to 4.16Hans Dedecker2018-05-024-17/+7
| | | | | | | | | Update to latest version of iproute2, refresh patches. See https://lkml.org/lkml/2018/4/2/349 for a full overview of the changes in 4.16. Build and tested on AR7xxx against musl Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uboot-envtools: Change download to git.Rosen Penev2018-05-021-6/+7
| | | | | | | | Currently, the build system uses an openwrt mirror which does not currently work and FTP can be unreliable under several circumstances. This change implicitly allows using all the mirrors to download. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* wolfssl: fix options and add support for wpa_supplicant featuresDaniel Golle2018-05-022-5/+40
| | | | | | | | Some options' default values have been changed upstream, others were accidentally inverted (CONFIG_WOLFSSL_HAS_DES3). Also add options needed to build hostapd/wpa_supplicant against wolfssl. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sysctl: Protect hard/symlinks by default.Rosen Penev2018-05-011-0/+3
| | | | | | | There is no usecase for not protecting symlinks that I know of in OpenWrt. Not even on desktop systems where you have multiple users with a shell. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ustream-ssl: update to latest git HEADJohn Crispin2018-05-011-3/+3
| | | | | | | | 527e700 ustream-ssl: Remove RC4 from ciphersuite in server mode. 39a6ce2 ustream-ssl: Enable ECDHE with OpenSSL. 45ac930 remove polarssl support Signed-off-by: John Crispin <john@phrozen.org>
* iptables: fix per object LDFLAGS for aggragate object buildsJohn Crispin2018-05-011-5/+5
| | | | | | | Without this patch the extra LDFLAGS of objects were selected based on the name of the extension being built, which breaks for aggregate so builds. Signed-off-by: John Crispin <john@phrozen.org>
* libnl: Disable debug supportHauke Mehrtens2018-04-301-0/+3
| | | | | | | | | | | | | | | | | | | This dereses the size of the libnl pakcage a little bit old: 857 bin/packages/mips_24kc/base/libnl_3.4.0-1_mips_24kc.ipk 41195 bin/packages/mips_24kc/base/libnl-core_3.4.0-1_mips_24kc.ipk 7818 bin/packages/mips_24kc/base/libnl-genl_3.4.0-1_mips_24kc.ipk 24322 bin/packages/mips_24kc/base/libnl-nf_3.4.0-1_mips_24kc.ipk 136075 bin/packages/mips_24kc/base/libnl-route_3.4.0-1_mips_24kc.ipk new: 852 bin/packages/mips_24kc/base/libnl_3.4.0-1_mips_24kc.ipk 35020 bin/packages/mips_24kc/base/libnl-core_3.4.0-1_mips_24kc.ipk 7615 bin/packages/mips_24kc/base/libnl-genl_3.4.0-1_mips_24kc.ipk 24114 bin/packages/mips_24kc/base/libnl-nf_3.4.0-1_mips_24kc.ipk 131134 bin/packages/mips_24kc/base/libnl-route_3.4.0-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libusb: Update to 1.0.22Rosen Penev2018-04-301-4/+4
| | | | | | | | | | Switched download from SourceForge to GitHub. It seems the author migrated to that. Also fixed the website URL as the SourceForge link is dead. Compile tested on ar71xx and mvebu. Small size decrease on ar71xx: 30444 vs. 30099 bytes. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* odhcp6c: update to latest git HEADHans Dedecker2018-04-291-3/+3
| | | | | | | 5316d7f ra: always trigger update in case of RA parameter change 327f73d dhcpv6: fix strncpy bounds Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uboot-mvebu: Fix build with libressl 2.7.2Hauke Mehrtens2018-04-291-0/+14
| | | | | | | When libressl was linked the libpthread was missing, add it in addition. Fixes: 2c192b69163f ("tools/libressl: update to version 2.7.2") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-02 13:01:48 +0000