aboutsummaryrefslogtreecommitdiffstats
path: root/package/firmware
Commit message (Collapse)AuthorAgeFilesLines
* treewide: unify OpenWrt hosted source via @OPENWRTPaul Spooren2021-02-052-2/+2
| | | | | | | | | | | Multiple sources are hosted on OpenWrts source server only. The source URLs to point to the server vary based on different epochs in OpenWrts history. Replace all by @OPENWRT which is an "empty" mirror, therefore using the fallback servers sources.cdn.openwrt.org and sources.openwrt.org. Signed-off-by: Paul Spooren <mail@aparcar.org>
* linux-firmware: Add wil6210 firmwareRobert Marko2021-01-051-0/+8
| | | | | | | | This patch adds wil6210 firmware and board files. Firmware version is not up to date but is only freely redistributable one I found. Board file is a generic one so most devices and especially those for long distance PtP links will require so in a ipq-wifi like way. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath10k-ct-firmware: update to 022 (2020-11-08)Álvaro Fernández Rojas2020-12-281-34/+34
| | | | | | Runtime-tested on ath79 (TP-Link Archer C7 v2) and ipq806x (Netgear R7800). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ipq40xx: add support for GL.iNet GL-AP1300Dongming Han2020-12-252-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SOC: Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core RAM: 256 MiB FLASH1: 4 MiB NOR FLASH2: 128 MiB NAND ETH: Qualcomm QCA8075 WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11n/ac W2 2x2 INPUT: Reset LED: Power, Internet UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1 OTHER: On board with BLE module - by cp210x USB serial chip On board hareware watchdog with GPIO0 high to turn on, and GPIO4 for watchdog feed Install via uboot tftp or uboot web failsafe. By uboot tftp: (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-generic-glinet_gl-ap1300-squashfs-nand-factory.ubi (IPQ40xx) # run lf By uboot web failsafe: Push the reset button for 10 seconds util the power led flash faster, then use broswer to access http://192.168.1.1 Afterwards upgrade can use sysupgrade image. Signed-off-by: Dongming Han <handongming@gl-inet.com>
* ipq806x: add support for NEC Platforms Aterm WG2600HP3Yanase Yuki2020-12-252-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NEC Platforms Aterm WG2600HP3 is a dual-band router based on Qualcomm IPQ8062. Specification ------------- - SoC: Qualcomm IPQ8062 - RAM: 512MiB - Flash memory: SPI-NOR 32MiB (Cypress S25FL256S) - Wi-Fi: Qualcomm QCA9984 (2.4GHz, 1ch - 13ch) - Wi-Fi: Qualcomm QCA9984 (5GHz, 36ch - 64ch, 100ch - 140ch) - Ethernet: 4x 100/1000 Mbps (1x WAN, 4x LAN) - LED: 6x green LED, 6x red LED - Input: 2x tactile switch, 1x SP3T slide switch - Serial console: 115200bps, through-hole J3 - [ ] [GND] [ ] [TX] [RX] ----> DC jack - Power: DC 12V 1.5A This device does not support VHT160 and VHT80+80. Custom BDFs are required to limit VHT capabilities. Flash instructions ------------------ 1. Setup TFTP server (IP address: 192.168.1.2) 2. Put initramfs image into TFTP server directory 3. Connect WG2600HP3 lan port and computer that runs TFTP server 4. Connect to the serial console 5. Interrupt booting by Esc key (password: chiron) 6. Execute the following commands # setenv bootcmd "nboot 0x44000000 1 0x860000" # saveenv # setenv ipaddr 192.168.1.1 # setenv serverip 192.168.1.2 # tftpboot 0x44000000 openwrt-ipq806x-generic-nec_wg2600hp3-initramfs-uImage 7. After booting OpenWrt initramfs image, backup SPI-NOR flash memory 8. Erase firmware partition # mtd erase firmware 9. Run sysupgrade Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
* ipq-wifi: Fix suffix for Plasma Cloud PA2200 QCA4019 board-2.binSven Eckelmann2020-12-251-0/+0
| | | | | | | | | | | | | The Makefile is rejecting all files with for a given prefix (here "board-plasmacloud_pa2200") when it didn't match a known suffix. Instead it stops the build with an error like: Makefile:135: *** Unrecognized board-file suffix '.ipq4019' for 'board-plasmacloud_pa2200.ipq4019'. Stop. The correct suffix for the QCA4019/hw1.0 is qca4019 and not ipq4019. Fixes: 4871fd2616ac ("ipq40xx: add support for Plasma Cloud PA2200") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ipq-wifi: Fix suffix for Plasma Cloud PA1200 QCA4019 board-2.binSven Eckelmann2020-12-251-0/+0
| | | | | | | | | | | | | The Makefile is rejecting all files with for a given prefix (here "board-plasmacloud_pa1200") when it didn't match a known suffix. Instead it stops the build with an error like: Makefile:135: *** Unrecognized board-file suffix '.ipq4019' for 'board-plasmacloud_pa1200.ipq4019'. Stop. The correct suffix for the QCA4019/hw1.0 is qca4019 and not ipq4019. Fixes: ea5bb6bbfee0 ("ipq40xx: add support for Plasma Cloud PA1200") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ipq40xx: add support for devolo Magic 2 WiFi nextStefan Schake2020-12-222-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v71) Cortex-A7 DRAM: 256 MiB NOR: 32 MiB ETH: Qualcomm Atheros QCA8075 (2 ports) PLC: MaxLinear G.hn 88LX5152 WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET, WiFi, PLC Button LEDS: red/white home, white WiFi To modify a retail device to run OpenWRT firmware: 1) Setup a TFTP server on IP address 192.168.0.100 and copy the OpenWRT initramfs (initramfs-fit-uImage.itb) to the TFTP root as 'uploadfile'. 2) Power on the device while pressing the recessed reset button next to the Ethernet ports. This causes the bootloader to retrieve and start the initramfs. 3) Once the initramfs is booted, the device will come up with IP 192.168.1.1. You can then connect through SSH (allow some time for the first connection). 4) On the device shell, run 'fw_printenv' to show the U-boot environment. Backup this information since it contains device unique factory data. 5) Change the boot command to support booting OpenWRT: # fw_setenv bootcmd 'sf probe && sf read 0x84000000 0x180000 0x400000 && bootm' 6) Change directory to /tmp, download the sysupgrade (e.g. through wget) and install it with sysupgrade. The device will reboot into OpenWRT. Notice that there is currently no support for booting the G.hn chip. This requires userland software we lack the rights to share right now. Signed-off-by: Stefan Schake <stefan.schake@devolo.de>
* ipq40xx: add support for Plasma Cloud PA2200Marek Lindner2020-12-223-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: * QCA IPQ4019 * 256 MB of RAM * 32 MB of SPI NOR flash (w25q256) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=PlasmaCloud-PA2200 * 2T2R 5 GHz (channel 36-64) - QCA9888 hw2.0 (PCI) - requires special BDF in QCA9888/hw2.0/board-2.bin bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA2200 * 2T2R 5 GHz (channel 100-165) - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=PlasmaCloud-PA2200 * GPIO-LEDs for 2.4GHz, 5GHz-SoC and 5GHz-PCIE * GPIO-LEDs for power (orange) and status (blue) * 1x GPIO-button (reset) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio3: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + used as LAN interface - phy@mdio4: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 802.3at POE+ + used as WAN interface * 12V 2A DC Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai> [sven@narfation.org: prepare commit message, rebase, use all LEDs, switch to dualboot_datachk upgrade script, use eth1 as designated WAN interface] Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ipq40xx: add support for Plasma Cloud PA1200Marek Lindner2020-12-222-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: * QCA IPQ4018 * 256 MB of RAM * 32 MB of SPI NOR flash (w25q256) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200 * 2T2R 5 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200 * 3x GPIO-LEDs for status (cyan, purple, yellow) * 1x GPIO-button (reset) * 1x USB (xHCI) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio4: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + used as LAN interface - phy@mdio3: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 802.3af/at POE(+) + used as WAN interface * 12V/24V 1A DC Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai> [sven@narfation.org: prepare commit message, rebase, use all LEDs, switch to dualboot_datachk upgrade script, use eth1 as designated WAN interface] Signed-off-by: Sven Eckelmann <sven@narfation.org>
* wireless-regdb: Update to version 2020.11.20Hauke Mehrtens2020-12-161-2/+2
| | | | | | | | | | | | 9efa1da wireless-regdb: update regulatory rules for Egypt (EG) ede87f5 wireless-regdb: restore channel 12 & 13 limitation in the US 5bcafa3 wireless-regdb: Update regulatory rules for Croatia (HR) 4e052f1 wireless-regdb: Update regulatory rules for Pakistan (PK) on 5GHz f9dfc58 wireless-regdb: update 5.8 GHz regulatory rule for GB c19aad0 wireless-regdb: Update regulatory rules for Kazakhstan (KZ) 07057d3 wireless-regdb: update regulatory database based on preceding changes Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-firmware: remove unused packageÁlvaro Fernández Rojas2020-11-281-182/+0
| | | | | | | All firmwares were added to linux-firmware, so there's no need to keep this package definitions. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-ct-firmware: switch to linux-firmware board binariesÁlvaro Fernández Rojas2020-11-281-135/+37
| | | | | | | | | | Instead of duplicating board firmware binaries, which are exactly the same as the ones from linux-firmware, add dependencies and remove duplicated downloads. Runtime-tested on ath79 (TP-Link Archer C7 v2) and ipq806x (Netgear R7800). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* linux-firmware: ath10k: add board firmware packagesÁlvaro Fernández Rojas2020-11-282-16/+46
| | | | | | | Split ath10k firmwares into board and firmware packages. This way we can add dependencies to ath10k-ct firmware packages. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* linux-firmware: brcm: use RPI 4B NVRAM fileÁlvaro Fernández Rojas2020-11-252-4/+2
| | | | | | Use the dedicated RPI 4B NVRAM file introduced in 20191215. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* cypress-nvram: add proper package conflictsÁlvaro Fernández Rojas2020-11-251-1/+9
| | | | | | There are linux firmware packages for all RPIs NVRAMs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* cypress-firmware: add proper package conflictsÁlvaro Fernández Rojas2020-11-251-1/+4
| | | | | | | There are linux firmwares packages for 43362, 43430 and 43455 which shouldn't be installed at the same time as Cypress firmwares. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-ct-firmware: add conflicts and better providesKarel Kočí2020-11-251-11/+71
| | | | | | | | | | | | | This expands packages to define not only provides but also conflicts. These packages provides same files so they should specify conflicts. Second expansion is that *-ct-htt and *-ct-full-htt firmwares can also provide *-ct variant as that allows explicit dependency on CT variant with various firmware modifications. Signed-off-by: Karel Kočí <karel.koci@nic.cz> [Bump PKG_RELEASE and format PROVIDES/CONFLICTS] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* layerscape: enable spi-uart in LS1012A-FRDMPawel Dembicki2020-11-232-1/+14
| | | | | | | | | This patch add missing support of SC16IS740 serial controller, installed on LS1012A-FRDM board. It was required to change RCW bits, because SPI was disabled by default. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* linux-firmware: update to 20201118John Audia2020-11-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git log --pretty=oneline --abbrev-commit 20201022..20201118 2ea8667 (tag: 20201118) rtlwifi: v88.2 firmware files for RTL8192CU e850cf3 Merge https://github.com/rjliao-qca/qca-btfw into main 65370db rtw88: RTL8822C: Update firmware to v9.9.4 e371b7c Revert "rtw88: RTL8822C: Update firmware to v9.9.4" 51d2c81 vpdma: Move firmware to ti directory d7a24c9 Merge branch 'master' of https://github.com/shahasit/video-linux-firmware into main 9ee1543 Merge branch 'master' of https://github.com/shahasit/bt-linux-firmware into main 3bcc4c1 amdgpu: update picasso VCN firmware b6b4542 amdgpu: update raven2 VCN firmware 79aa335 amdgpu: update raven VCN firmware c93834e rtw88: RTL8822C: Update firmware to v9.9.4 3ef6c93 rtl_bt: Update RTL8822C BT(USB I/F) FW to 0x099A_281A b503c96 Merge branch 'ath10k-20201023' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware into main 463fdea QCA: Update Bluetooth firmware for QCA6390 8a46c32 qcom : updated venus firmware files for v5.4 d7793e5 QCA : Fixed BT SSR due to command timeout / IO fatal error d842d8c ath11k: QCA6390 hw2.0: add to WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 8fb1a6e ath11k: QCA6390 hw2.0: add board-2.bin 34cb5fc ath11k: IPQ8074 hw2.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 c0a8efd ath11k: IPQ8074 hw2.0: add board-2.bin ac7f5e9 ath11k: IPQ6018 hw1.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 2594e51 ath11k: IPQ6018 hw1.0: add board-2.bin d8f10d4 ath10k: QCA6174 hw3.0: add firmware-sdio-6.bin version WLAN.RMH.4.4.1-00077 6652297 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00131 36059aa ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00131 1e5629d ath10k: QCA6174 hw3.0: update board-2.bin e315d1a ath10k: QCA6174 hw3.0: update firmware-6.bin to WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Signed-off-by: John Audia <graysky@archlinux.us>
* linux-firmware: update to 20201022John Audia2020-11-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git log --pretty=oneline --abbrev-commit 20200918..20201022 dae4b4c (HEAD -> main, tag: 20201022, origin/master, origin/main, origin/HEAD) Merge branch 'v1.1.5' of https://github.com/irui-wang/linux_fw_vpu_v1.1.5 into main 04f71fe cypress: add Cypress firmware and clm_blob files 4d0755b Merge https://github.com/shahasit/bt-linux-firmware into main 2a262bb Merge https://github.com/shahasit/video-linux-firmware into main c024640 Merge tag 'iwlwifi-fw-2020-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware into main 09e8cff rtl_bt: Update RTL8821C BT FW to 0xAA6C_A99E d7904d5 ath10k: add SDIO firmware for QCA9377 WiFi ecdc272 Merge branch 'dg1_dmc_v2_02' of git://anongit.freedesktop.org/drm/drm-firmware into main c86361d ice: update package file to 1.3.16.0 76ceac8 mediatek: separate venc service thread 8877322 QCA : Updated firmware file for WCN3991 4f41e9d iwlwifi: update and add new FWs from core56-54 release 346057d iwlwifi: update 3168, 7265D, 8000C and 8265 firmwares a140ef3 i915: Add DG1 DMC v2.02 a09b728 qcom : updated venus firmware files for v5.4 58d41d0 ice: Add comms package file for Intel E800 series driver c1bef9e copy-firmware: Always write Link: entries b95e230 Merge commit 'ad1da95d52f1a9206da3ef52f3484f3b89ec6615' of https://github.com/shahasit/linux-firmware-bt into main 0b884ec amdgpu: update vega20 firmware for 20.40 bca0233 amdgpu: update vega12 firmware for 20.40 8652e02 amdgpu: update vega10 firmware for 20.40 9f46d48 amdgpu: update renoir firmware for 20.40 e667605 amdgpu: update raven2 firmware for 20.40 a487f2f amdgpu: update raven firmware for 20.40 aa7b732 amdgpu: update picasso firmware for 20.40 a18981e amdgpu: update navi14 firmware for 20.40 1696e2e amdgpu: update navi12 firmware for 20.40 6b8a6ea amdgpu: update navi10 firmware for 20.40 5b30b38 linux-firmware: Add new VPDMA firmware 1b8.bin ad1da95 QCA : Updated firmware files for WCN3991 b78a66c linux-firmware: Update firmware for Cadence MHDP8546 DP bridge afbfb5f linux-firmware: Update firmware patch for Intel Bluetooth 7265 (D1) a38b8ed Mellanox: Add new mlxsw_spectrum firmware xx.2008.1312 1487a8a linux-firmware: nvidia: move firmware symlinks to WHENCE bdd5617 linux-firmware: move i915 firmware symlinks to WHENCE ab69b57 linux-firmware: move iwlwifi-7265D-10.ucode symlink to WHENCE 49c4ff5 Merge branch 'mrvl-prestera' of https://github.com/PLVision/linux-firmware into main 7a02212 linux-firmware: Update Marvell Switchdev firmware with ABI changes Signed-off-by: John Audia <graysky@archlinux.us>
* layerscape: update ls-rcw to LSDK-20.04-update-290520Biwen Li2020-10-261-4/+4
| | | | | | | | | Update ls-rcw to LSDK-20.04-update-290520. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [rebase, fix PKG_RELEASE change] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: improve support for Edgecore ECW5211Sungbo Eo2020-10-072-2/+0
| | | | | | | | | | | | | | | | | | | This adds several stylistic and functional improvements of the recently added Edgecore ECW5211, especially: * Drop the local BDFs as those are already in the upstream under different names * Add SPDX tag to DTS * Add label MAC address * Move LED trigger to DTS * Remove unnecessary status="okay" * Disable unused SS USB phy as the USB port only supports USB 2.0 * Make uboot-env partition writable * Remove qcom,poll_required_dynamic property as the driver does not use it * Tidy up the device recipe Fixes: 4488b260a02e ("ipq40xx: add Edgecore ECW5211 support") Signed-off-by: Sungbo Eo <mans0n@gorani.run> Acked-by: Robert Marko <robert.marko@sartura.hr>
* linux-firmware: update to 20200918David Bauer2020-10-031-3/+3
| | | | | | | | | | | | | | | | | | | 00a84c5 linux-firmware: Update AMD SEV firmware 71338c2 Merge branch 'for-master' of https://github.com/CosmicPenguin/linux-firmware into main 07367b9 linux-firmware: Update firmware file for Intel Bluetooth AX200 1d1586a linux-firmware: Update firmware file for Intel Bluetooth AX201 28b333d linux-firmware: Update firmware file for Intel Bluetooth 9560 db30380 linux-firmware: Update firmware file for Intel Bluetooth 9260 eb3aa1f Mellanox: Add new mlxsw_spectrum firmware xx.2008.1310 ec88f05 mediatek: update MT7915 firmware to 20200819 a9993f8 brcm: Fix a stale symlink for RPi3 model b+ f48fec4 qcom: Add updated a5xx and a6xx microcode d5f9eea wl18xx: update firmware file 8.9.0.0.83 7a237c6 linux-firmware: mt7615: update firmware to 20200814 version 74bd44f amdgpu: add navi12 firmware from 20.30 b9f69cd amdgpu: update navi10 firmware for 20.30 Signed-off-by: David Bauer <mail@david-bauer.net>
* ath10k-firmware: package Wave1 from linux-firmwareDavid Bauer2020-09-282-4/+4
| | | | | | | | | | The firmware for Wave1 chips was updated to the latest release 10.2.4-1.0-00047 at the end of 2019 (commit 513d70cc50b). Package firmware for these chips from linux-firmware. This avoids downloading the ath10k-firmware repository. Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq40xx: Add support for Linksys MR8300 (Dallas)Hans Geiblinger2020-09-253-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linksys MR8300 is based on QCA4019 and QCA9888 and provides three, independent radios. NAND provides two, alternate kernel/firmware images with fail-over provided by the OEM U-Boot. Hardware Highlights: SoC: IPQ4019 at 717 MHz (4 CPUs) RAM: 512MB RAM SoC: Qualcomm IPQ4019 at 717 MHz (4 CPUs) RAM: 512M DDR3 FLASH: 256 MB NAND (Winbond W29N02GV, 8-bit parallel) ETH: Qualcomm QCA8075 (4x GigE LAN, 1x GigE Internet Ethernet Jacks) BTN: Reset and WPS USB: USB3.0, single port on rear with LED SERIAL: Serial pads internal (unpopulated) LED: Four status lights on top + USB LED WIFI1: 2x2:2 QCA4019 2.4 GHz radio on ch. 1-14 WIFI2: 2x2:2 QCA4019 5 GHz radio on ch. 36-64 WIFI3: 2x2:2 QCA9888 5 GHz radio on ch. 100-165 Support is based on the already supported EA8300. Key differences: EA8300 has 256MB RAM where MR8300 has 512MB RAM. MR8300 has a revised top panel LED setup. Installation: "Factory" images may be installed directly through the OEM GUI using URL: https://ip-of-router/fwupdate.html (Typically 192.168.1.1) Signed-off-by: Hans Geiblinger <cybrnook2002@yahoo.com> [copied Hardware-highlights from EA8300. Fixed alphabetical order. fixed commit subject, removed bogus unit-address of keys, fixed author (used Signed-off-By to From:) ] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for Luma Home WRTQ-329ACNTomasz Maciej Nowak2020-09-252-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Luma Home WRTQ-329ACN, also known as Luma WiFi System, is a dual-band wireless access point. Specification SoC: Qualcomm Atheros IPQ4018 RAM: 256 MB DDR3 Flash: 2 MB SPI NOR 128 MB SPI NAND WIFI: 2.4 GHz 2T2R integrated 5 GHz 2T2R integrated Ethernet: 2x 10/100/1000 Mbps QCA8075 USB: 1x 2.0 Bluetooth: 1x 4.0 CSR8510 A10, connected to USB bus LEDS: 16x multicolor LEDs ring, controlled by MSP430G2403 MCU Buttons: 1x GPIO controlled EEPROM: 16 Kbit, compatible with AT24C16 UART: row of 4 holes marked on PCB as J19, starting count from the side of J19 marking on PCB 1. GND, 2. RX, 3. TX, 4. 3.3V baud: 115200, parity: none, flow control: none The device supports OTA or USB flash drive updates, unfotunately they are signed. Until the signing key is known, the UART access is mandatory for installation. The difficult part is disassembling the casing, there are a lot of latches holding it together. Teardown Prepare three thin, but sturdy, prying tools. Place the device with back of it facing upwards. Start with the wall having a small notch. Insert first tool, until You'll feel resistance and keep it there. Repeat the procedure for neighbouring walls. With applying a pressure, one edge of the back cover should pop up. Now carefully slide one of the tools to free the rest of the latches. There's no need to solder pins to the UART holes, You can use hook clips, but wiring them outside the casing, will ease debuging and recovery if problems occur. Installation 1. Prepare TFTP server with OpenWrt initramfs image. 2. Connect to UART port (don't connect the voltage pin). 3. Connect to LAN port. 4. Power on the device, carefully observe the console output and when asked quickly enter the failsafe mode. 5. Invoke 'mount_root'. 6. After the overlayfs is mounted run: fw_setenv bootdelay 3 This will allow to access U-Boot shell. 7. Reboot the device and when prompted to stop autoboot, hit any key. 8. Adjust "ipaddr" and "serverip" addresses in U-Boot environment, use 'setenv' to do that, then run following commands: tftpboot 0x84000000 <openwrt_initramfs_image_name> bootm 0x84000000 and wait till OpenWrt boots. 9. In OpenWrt command line run following commands: fw_setenv openwrt "setenv mtdids nand1=spi_nand; setenv mtdparts mtdparts=spi_nand:-(ubi); ubi part ubi; ubi read 0x84000000 kernel; bootm 0x84000000" fw_setenv bootcmd "run openwrt" 10. Transfer OpenWrt sysupgrade image to /tmp directory and flash it with: ubirmvol /dev/ubi0 -N ubi_rootfs sysupgrade -v -n /tmp/<openwrt_sysupgrade_image_name> 11. After flashing, the access point will reboot to OpenWrt, then it's ready for configuration. Reverting to OEM firmware 1. Execute installation guide steps: 1, 2, 3, 7, 8. 2. In OpenWrt command line run following commands: ubirmvol /dev/ubi0 -N rootfs_data ubirmvol /dev/ubi0 -N rootfs ubirmvol /dev/ubi0 -N kernel ubirename /dev/ubi0 kernel1 kernel ubi_rootfs1 ubi_rootfs ubimkvol /dev/ubi0 -S 34 -N kernel1 ubimkvol /dev/ubi0 -S 320 -N ubi_rootfs1 ubimkvol /dev/ubi0 -S 264 -N rootfs_data fw_setenv bootcmd bootipq 3. Reboot. Known issues The LEDs ring doesn't have any dedicated driver or application to control it, the only available option atm is to manipulate it with 'i2cset' command. The default action after applying power to device is spinning blue light. This light will stay active at all time. To disable it install 'i2c-tools' with opkg and run: i2cset -y 2 0x48 3 1 0 0 i The light will stay off until next cold boot. Additional information After completing 5. step from installation guide, one can disable asking for root password on OEM firmware by running: sed -e 's/root:x:/root::/' -i /etc/passwd This is useful for investigating the OEM firmware. One can look at the communication between the stock firmware and the vendor's cloud servers or as a way of making a backup of both flash chips. The root password seems to be constant across all sold devices. This is output of 'led_ctl' from OEM firmware to illustrate possibilities of LEDs ring: Usage: led_ctl [status | upgrade | force_upgrade | version] led_ctl solid COLOR <brightness> led_ctl single COLOR INDEX <brightness 0 - 15> led_ctl spinning COLOR <period 1 - 16 (lower = faster)> led_ctl fill COLOR <period 1 - 16 (lower = faster)> ( default is 5 ) led_ctl flashing COLOR <on dur 1 - 128> <off dur 1 - 128> (default is 34) ( default is 34 ) led_ctl pulsing COLOR COLOR: red, green, blue, yellow, purple, cyan, white Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [squash "ipq-wifi: add BDFs for Luma Home WRTQ-329ACN" into commit, changed ubi volumes for easier integration, slightly reworded commit message, changed ubi volume layout to use standard names all around] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: intel-microcode: update to 20200616Tan Zien2020-09-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | intel-microcode (3.20200616.1) * New upstream microcode datafile 20200616 + Downgraded microcodes (to a previously shipped revision): sig 0x000406e3, pf_mask 0xc0, 2019-10-03, rev 0x00d6, size 101376 sig 0x000506e3, pf_mask 0x36, 2019-10-03, rev 0x00d6, size 101376 * Works around hangs on boot on Skylake-U/Y and Skylake Xeon E3, * This update *removes* the SRBDS mitigations from the above processors * Note that Debian had already downgraded 0x406e3 in release 3.20200609.2 intel-microcode (3.20200609.2) * REGRESSION FIX: 0x406e3: rollback to rev 0xd6 and document regression * Microcode rollbacks (closes: LP#1883002) sig 0x000406e3, pf_mask 0xc0, 2019-10-03, rev 0x00d6, size 101376 * THIS REMOVES THE SECURITY FIXES FOR SKYLAKE-U/Y PROCESSORS * Avoid hangs on boot on (some?) Skylake-U/Y processors, * ucode-blacklist: blacklist models 0x8e and 0x9e from late-loading, just in case. Note that Debian does not do late loading by itself. Refer to LP#1883002 for the report, 0x806ec hangs upon late load. intel-microcode (3.20200609.1) * SECURITY UPDATE * For most processors: SRBDS and/or VRDS, L1DCES mitigations depending on the processor model * For Skylake HEDT and Skylake Xeons with signature 0x50654: VRDS and L1DCES mitigations, plus mitigations described in the changelog entry for package release 3.20191112.1. * Expect some performance impact, the mitigations are enabled by default. A Linux kernel update will be issued that allows one to selectively disable the mitigations. * New upstream microcode datafile 20200609 * Implements mitigation for CVE-2020-0543 Special Register Buffer Data Sampling (SRBDS), INTEL-SA-00320, CROSSTalk * Implements mitigation for CVE-2020-0548 Vector Register Data Sampling (VRDS), INTEL-SA-00329 * Implements mitigation for CVE-2020-0549 L1D Cache Eviction Sampling (L1DCES), INTEL-SA-00329 * Known to fix the regression introduced in release 2019-11-12 (sig 0x50564, rev. 0x2000065), which would cause several systems with Skylake Xeon, Skylake HEDT processors to hang while rebooting * Updated Microcodes: sig 0x000306c3, pf_mask 0x32, 2019-11-12, rev 0x0028, size 23552 sig 0x000306d4, pf_mask 0xc0, 2019-11-12, rev 0x002f, size 19456 sig 0x00040651, pf_mask 0x72, 2019-11-12, rev 0x0026, size 22528 sig 0x00040661, pf_mask 0x32, 2019-11-12, rev 0x001c, size 25600 sig 0x00040671, pf_mask 0x22, 2019-11-12, rev 0x0022, size 14336 sig 0x000406e3, pf_mask 0xc0, 2020-04-27, rev 0x00dc, size 104448 sig 0x00050653, pf_mask 0x97, 2020-04-24, rev 0x1000157, size 32768 sig 0x00050654, pf_mask 0xb7, 2020-04-24, rev 0x2006906, size 34816 sig 0x00050656, pf_mask 0xbf, 2020-04-23, rev 0x4002f01, size 52224 sig 0x00050657, pf_mask 0xbf, 2020-04-23, rev 0x5002f01, size 52224 sig 0x000506e3, pf_mask 0x36, 2020-04-27, rev 0x00dc, size 104448 sig 0x000806e9, pf_mask 0x10, 2020-04-27, rev 0x00d6, size 103424 sig 0x000806e9, pf_mask 0xc0, 2020-04-27, rev 0x00d6, size 103424 sig 0x000806ea, pf_mask 0xc0, 2020-04-27, rev 0x00d6, size 103424 sig 0x000806eb, pf_mask 0xd0, 2020-04-27, rev 0x00d6, size 103424 sig 0x000806ec, pf_mask 0x94, 2020-04-23, rev 0x00d6, size 103424 sig 0x000906e9, pf_mask 0x2a, 2020-04-23, rev 0x00d6, size 103424 sig 0x000906ea, pf_mask 0x22, 2020-04-27, rev 0x00d6, size 102400 sig 0x000906eb, pf_mask 0x02, 2020-04-23, rev 0x00d6, size 103424 sig 0x000906ec, pf_mask 0x22, 2020-04-27, rev 0x00d6, size 102400 sig 0x000906ed, pf_mask 0x22, 2020-04-23, rev 0x00d6, size 103424 * Restores the microcode-level fixes that were reverted by release 3.20191115.2 for sig 0x50654 (Skylake Xeon, Skylake HEDT) intel-microcode (3.20200520.1) * New upstream microcode datafile 20200520 + Updated Microcodes: sig 0x000206d6, pf_mask 0x6d, 2020-03-04, rev 0x0621, size 18432 sig 0x000206d7, pf_mask 0x6d, 2020-03-24, rev 0x071a, size 19456 intel-microcode (3.20200508.1) * New upstream microcode datafile 20200508 + Updated Microcodes: sig 0x000706e5, pf_mask 0x80, 2020-03-12, rev 0x0078, size 107520 * Likely fixes several critical errata on IceLake-U/Y causing system hangs intel-microcode (3.20191115.2) * Microcode rollbacks (closes: #946515, LP#1854764): sig 0x00050654, pf_mask 0xb7, 2019-07-31, rev 0x2000064, size 33792 * Avoids hangs on warm reboots (cold boots work fine) on HEDT and Xeon processors with signature 0x50654. intel-microcode (3.20191115.1) * New upstream microcode datafile 20191115 + Updated Microcodes: sig 0x000406e3, pf_mask 0xc0, 2019-10-03, rev 0x00d6, size 101376 sig 0x000506e3, pf_mask 0x36, 2019-10-03, rev 0x00d6, size 101376 sig 0x000806e9, pf_mask 0x10, 2019-10-15, rev 0x00ca, size 100352 sig 0x000806e9, pf_mask 0xc0, 2019-09-26, rev 0x00ca, size 100352 sig 0x000806ea, pf_mask 0xc0, 2019-10-03, rev 0x00ca, size 100352 sig 0x000806eb, pf_mask 0xd0, 2019-10-03, rev 0x00ca, size 100352 sig 0x000806ec, pf_mask 0x94, 2019-10-03, rev 0x00ca, size 100352 sig 0x000906e9, pf_mask 0x2a, 2019-10-03, rev 0x00ca, size 100352 sig 0x000906ea, pf_mask 0x22, 2019-10-03, rev 0x00ca, size 99328 sig 0x000906eb, pf_mask 0x02, 2019-10-03, rev 0x00ca, size 100352 sig 0x000906ec, pf_mask 0x22, 2019-10-03, rev 0x00ca, size 99328 sig 0x000906ed, pf_mask 0x22, 2019-10-03, rev 0x00ca, size 100352 sig 0x000a0660, pf_mask 0x80, 2019-10-03, rev 0x00ca, size 91136 intel-microcode (3.20191113.1) * New upstream microcode datafile 20191113 + SECURITY UPDATE, refer to the 3.20191112.1 changelog entry for details Adds microcode update for CFL-S (Coffe Lake Desktop) INTEL-SA-00270, CVE-2019-11135, CVE-2019-0117 + Updated Microcodes (previously removed): sig 0x000906ec, pf_mask 0x22, 2019-08-14, rev 0x00c6, size 99328 intel-microcode (3.20191112.1) * New upstream microcode datafile 20191112 + SECURITY UPDATE - Implements MDS mitigation (TSX TAA), INTEL-SA-00270, CVE-2019-11135 - Implements TA Indirect Sharing mitigation, and improves the MDS mitigation (VERW) - Fixes FIVR (Xeon Voltage Modulation) vulnerability, INTEL-SA-00271, CVE-2019-11139 - Fixes SGX vulnerabilities and errata (including CVE-2019-0117) + CRITICAL ERRATA FIXES - Fixes Jcc conditional jump macro-fusion erratum (Skylake+, except Ice Lake), causes a 0-3% typical perforance hit (can be as bad as 10%). But ensures the processor will actually jump where it should, so don't even *dream* of not applying this fix. - Fixes AVX SHUF* instruction implementation flaw erratum + Removed Microcodes: sig 0x000906ec, pf_mask 0x22, 2019-02-14, rev 0x00ae, size 98304 + New Microcodes: sig 0x000406d8, pf_mask 0x01, 2019-09-16, rev 0x012d, size 84992 sig 0x00050656, pf_mask 0xbf, 2019-09-05, rev 0x400002c, size 51200 sig 0x00060663, pf_mask 0x80, 2018-04-17, rev 0x002a, size 87040 sig 0x000706a8, pf_mask 0x01, 2019-08-29, rev 0x0016, size 74752 sig 0x000706e5, pf_mask 0x80, 2019-09-05, rev 0x0046, size 102400 sig 0x000a0660, pf_mask 0x80, 2019-08-27, rev 0x00c6, size 91136 + Updated Microcodes: sig 0x000406e3, pf_mask 0xc0, 2019-08-14, rev 0x00d4, size 101376 sig 0x00050654, pf_mask 0xb7, 2019-09-05, rev 0x2000065, size 34816 sig 0x00050657, pf_mask 0xbf, 2019-09-05, rev 0x500002c, size 51200 sig 0x000506e3, pf_mask 0x36, 2019-08-14, rev 0x00d4, size 101376 sig 0x000706a1, pf_mask 0x01, 2019-08-28, rev 0x0032, size 73728 sig 0x000806e9, pf_mask 0x10, 2019-08-14, rev 0x00c6, size 99328 sig 0x000806e9, pf_mask 0xc0, 2019-08-14, rev 0x00c6, size 100352 sig 0x000806ea, pf_mask 0xc0, 2019-08-14, rev 0x00c6, size 99328 sig 0x000806eb, pf_mask 0xd0, 2019-08-14, rev 0x00c6, size 100352 sig 0x000806ec, pf_mask 0x94, 2019-08-14, rev 0x00c6, size 100352 sig 0x000906e9, pf_mask 0x2a, 2019-08-14, rev 0x00c6, size 100352 sig 0x000906ea, pf_mask 0x22, 2019-08-14, rev 0x00c6, size 99328 sig 0x000906eb, pf_mask 0x02, 2019-08-14, rev 0x00c6, size 100352 sig 0x000906ed, pf_mask 0x22, 2019-08-14, rev 0x00c6, size 99328 + Updated Microcodes (previously removed): sig 0x00050653, pf_mask 0x97, 2019-09-09, rev 0x1000151, size 32768 Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* firmware: amd64-microcode: update to 20191218Tan Zien2020-09-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | amd64-microcode (3.20191218.1) * New microcode update packages from AMD upstream: + Removed Microcode updates (known to cause issues): sig 0x00830f10, patch id 0x08301025, 2019-07-11 * README: update for new release amd64-microcode (3.20191021.1) * New microcode update packages from AMD upstream: + New Microcodes: sig 0x00830f10, patch id 0x08301025, 2019-07-11 + Updated Microcodes: sig 0x00800f12, patch id 0x08001250, 2019-04-16 sig 0x00800f82, patch id 0x0800820d, 2019-04-16 amd64-microcode (3.20181128.1) * New microcode update packages from AMD upstream: + New Microcodes: sig 0x00800f82, patch id 0x0800820b, 2018-06-20 Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* ipq40xx: add Edgecore OAP-100 supportJohn Crispin2020-09-172-0/+2
| | | | | | | | | | | | | | | | flashing the unit * first update to latest edcore FW as per the PDF instructions * boot the initramfs - tftpboot 0x88000000 openwrt-ipq40xx-generic-edgecore_oap100-initramfs-fit-uImage.itb; bootm * inside the initramfs call the following commiands - ubiattach -p /dev/mtd0 - ubirmvol /dev/ubi0 -n0 - ubirmvol /dev/ubi0 -n1 - ubirmvol /dev/ubi0 -n2 * scp the sysupgrade image to the board and call - sysupgrade -n openwrt-ipq40xx-generic-edgecore_oap100-squashfs-nand-sysupgrade.bin Signed-off-by: John Crispin <john@phrozen.org>
* ipq40xx: add Edgecore ECW5211 supportRobert Marko2020-09-172-0/+2
| | | | | | | | | | | | | | | | | This patch adds support for the Edgecore ECW5211 indoor AP. Specification: - SoC: Qualcomm Atheros IPQ4018 ARMv7-A 4x Cortex A-7 - RAM: 256MB DDR3 - NOR Flash: 16MB SPI NOR - NAND Flash: 128MB MX35LFxGE4AB SPI-NAND - Ethernet: 2 x 1G via Q8075 PHY connected to ethernet adapter via PSGMII (802.3af POE IN on eth0) - USB: 1 x USB 3.0 SuperSpeed - WLAN: Built-in IPQ4018 (2x2 802.11bng, 2x2 802.11 acn) - CC2540 BLE connected to USB 2.0 port - Atmel AT97SC3205T I2C TPM Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq806x: add Edgecore ECW5410 supportRobert Marko2020-09-172-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Edgecore ECW5410 indoor AP. Specification: - SoC: Qualcomm Atheros IPQ8068 ARMv7 2x Cortex A-15 - RAM: 256MB(225 usable) DDR3 - NOR Flash: 16MB SPI NOR - NAND Flash: 128MB S34MS01G2 Parallel NAND - Ethernet: 2 x 1G via 2x AR8033 PHY-s connected directly to GMAC2 and GMAC3 via SGMII (802.3af POE IN on eth0) - USB: 1 x USB 3.0 SuperSpeed - WLAN: 2x QCA9994 AC Wawe 2 (1x 2GHz bgn, 1x 5GHz acn) - CC2540 BLE - UART console on RJ45 next to ethernet ports exposed. Its Cisco pin compatible, 115200 8n1 baud. Installation instructions: Through stock firmware or initramfs. 1.Connect to console 2. Login with root account, if password is unknown then interrupt the boot with f and reset it in failsafe. 3. Transfer factory image 4. Flash the image with ubiformat /dev/mtd1 -y -f <your factory image path> This will replace the rootfs2 with OpenWrt, if you are currently running from rootfs2 then simply change /dev/mtd1 to /dev/mtd0 Note Initramfs: 1. Connect to console 2. Transfer the image from TFTP server with tftpboot, or by using DHCP advertised image with dhcp command. 3. bootm 4. Run ubiformat /dev/mtd1 You need to interrupt the bootloader after rebooting and run: run altbootcmd This will switch your active rootfs partition to one you wrote to and boot from it. So if rootfs1 is active, then it will change it to rootfs2. This will format the rootfs2 partition, if your active partition is 2 then simply change /dev/mtd1 with /dev/mtd0 If you dont format the partition you will be writing too, then sysupgrade will find existing UBI rootfs and kernel volumes and update those. This will result in wrong ordering and OpenWrt will panic on boot. 5. Transfer sysupgrade image 6. Flash with sysupgrade -n. Note that sysupgrade will write the image to rootfs partition that is not currently in use. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* firmware: ipq-wifi: enable use on IPQ806xRobert Marko2020-09-171-1/+1
| | | | | | | | | This enables the ipq-wifi package to be used on IPQ806x target. Its needed for boards using a different BDF than one shipped in the upstream board-2.bin. Currently needed for Edgecore ECW5410. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* treewide: https for downloads.openwrt.org sourcesPaul Spooren2020-08-311-1/+1
| | | | | | | Instead of using http and https for source downloads from downloads.openwrt.org, always use https for it's better security. Signed-off-by: Paul Spooren <mail@aparcar.org>
* ar71xx: drop targetAdrian Schmutzler2020-08-302-88/+0
| | | | | | | | | | This target has been mostly replaced by ath79 and won't be included in the upcoming release anymore. Finally put it to rest. This also removes all references in packages, tools, etc. as well as the uboot-ar71xx and vsc73x5-ucode packages. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* linux-firmware: add support for Marvell SDIO 8997Josef Schlehofer2020-08-242-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For example, Turris MOX SDIO card is using Marvell (NXP) 88W8997 chip. Technical specs of 88W8997: - 28nm - 802.11 ac wave-2 It should support simultaneous dual-band 2.4 GHz and 5 GHz, but it requires to support multiSSID for one Wi-Fi card [1], which is not supported in OpenWrt, yet and if we tried to run two instances of hostapd, it didn't work well, so it's 2.4 GHz or 5 GHz. - 2x2 MU-MIMO - Bluetooth 5.1 with LE support - Unfortunately, there can be connected only 8 clients at the same time (limited by FW, however, there exists "enterprise" chip, its equal chip, it is just different that it uses different FW) Symlink is necessary as mwifiex_sdio tries to load sd8997_uapsta.bin [ 13.651182] mwifiex_sdio mmc0:0001:1: Direct firmware load for mrvl/sd8997_uapsta.bin failed with error -2 [ 13.661065] mwifiex_sdio mmc0:0001:1: Falling back to user helper [ 13.684880] firmware mrvl!sd8997_uapsta.bin: firmware_loading_store: map pages failed [ 13.695910] mwifiex_sdio mmc0:0001:1: Failed to get firmware mrvl/sd8997_uapsta.bin [ 13.703774] mwifiex_sdio mmc0:0001:1: info: _mwifiex_fw_dpc: unregister device Pali Rohár sent two patches [2] [3] into kernel to fix default firmware name for SD8997, so the symlink will not be required in the future versions of kernel, which was accepted and right now, according to my details it was backported to 5.8, 5.7 and 5.4 [1] https://bugs.openwrt.org/index.php?do=details&task_id=3243 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=00eb0cb36fad5 [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2e1fcac52a9ea Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* linux-firmware: update to version 20200817Josef Schlehofer2020-08-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git log --pretty=oneline --abbrev-commit 20200619..20200817 7a30af1 (HEAD -> master, tag: 20200817, origin/master, origin/main, origin/HEAD) Merge branch 'i915-firmware-updates-08-2020' of git://anongit.freedesktop.org/drm/drm-firmware into main 923bfa6 brcm: Add brcmfmac43455-sdio.raspberrypi,3-model-a-plus.txt symlink 33e11ab rtl_bt: Update RTL8822C BT UART firmware to 0x0599_8A4F 1b81373 i915: Add DMC firmware 2.02 for RKL bdf8d7a i915: Add DMC firmware 2.08 for TGL 1bcdc9a i915: Add HuC firwmare v7.5.0 for TGL c331aa9 amdgpu: update vega20 firmware for 20.30 a434387 amdgpu: update vega12 firmware for 20.30 49e9ea8 amdgpu: update vega10 firmware for 20.30 d89e9b1 amdgpu: update renoir firmware for 20.30 373c08a amdgpu: update raven2 firmware for 20.30 69ca06e amdgpu: update raven firmware for 20.30 12042c2 amdgpu: update picasso firmware for 20.30 2c9d97a amdgpu: update navi14 firmware for 20.30 eaa3e55 amdgpu: update navi10 firmware for 20.30 9bc3789 linux-firmware: update NXP SDSD-8997 firmware image 6c79b68 Mellanox: Add new mlxsw_spectrum firmware xx.2008.1036 2b823fc (tag: 20200721) linux-firmware: Update AMD SEV firmware e33306f Merge branch 'qca_0714' of https://github.com/bgodavar/qca_bt_fw into main 1d1c80b Update to 20200629111339 version to aligh SDK. Mainly fix DFS false alarm. 69c7f0b rtl_nic: update firmware for RTL8125B f39b687 Update binary firmware for MT7663 based devices to include firmware offload feature and low power feature. 3882702 QCA: Add correct bin file for WCN3991 3d3a06f linux-firmware: Update firmware file for Intel Bluetooth AX201 b7849f7 linux-firmware: Update firmware file for Intel Bluetooth AX200 07b0375 linux-firmware: Update firmware file for Intel Bluetooth 9560 44bf1b1 linux-firmware: Update firmware file for Intel Bluetooth 9260 7169ab3 linux-firmware: wilc1000: add wilc1000 v15.4 FW b1497fc Merge https://github.com/rjliao-qca/qca-btfw into main c4e04b4 QCA: Update Bluetooth firmware for QCA6390 74ac3b5 Merge https://github.com/bgodavar/qca_wcn3991 into main 1a0c0c2 amdgpu: add UVD firmware for SI asics 24cc617 QCA: Update WCN3991 FW files Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* ath10k-ct-firmware: update firmware imagesMichael Yartys2020-08-121-30/+30
| | | | | | | | | | | Not a large change from last time, but should fix at least one rare wave-2 crash. The htt-mgt-community builds are trimmed for supporting lots of stations (typically 150+ stations per radio). Tested on Netgear R7800. Signed-off-by: Michael Yartys <michael.yartys@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* layerscape: harmonize device stringsAdrian Schmutzler2020-07-274-36/+36
| | | | | | | | | | | | | | | | | | | | OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* linux-firmware: package EIP197 mini firmwareTomasz Maciej Nowak2020-07-111-0/+9
| | | | | | | | | | | | | Quoting part of original message from eefb5f741015 commit in linux-firmware repository: This adds the "minifw" version of the EIP197 firmware, which the inside- secure driver will use as a fallback if the original full-featured firmware cannot be found. This allows for using the inside-secure driver and hardware without access to "official" firmware only available under NDA. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ipq40xx: add support for Buffalo WTR-M2133HPYanase Yuki2020-07-083-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffalo WTR-M2133HP is a Tri-Band router based on IPQ4019. Specification ------------- - SoC: Qualcomm IPQ4019 - RAM: 512MiB - Flash Memory: NAND 128MiB (MXIC MX30LF1G18AC) - Wi-Fi: Qualcomm IPQ4019 (2.4GHz, 1ch - 13ch) - Wi-Fi: Qualcomm IPQ4019 (5GHz, 36ch - 64ch) - Wi-Fi: Qualcomm QCA9984 (2T2R, 5GHz, 100ch - 140ch) - Ethernet: 4x 10/100/1000 Mbps (1x WAN, 3x LAN) - LED: 4x white LED, 4x orange LED, 1x blue LED - USB: 1x USB 3.0 port - Input: 2x tactile switch, 2x slide switch (2x SP3T) - Serial console: 115200bps, pinheader JP5 on PCB - Power: DC 12V 2A Flash instruction ----------------- 1. Set up a TFTP server (IP address: 192.168.11.10) 2. Rename "initramfs-fit-uImage.itb" to "WTR-M2133HP-initramfs.uImage" and put it into the TFTP server directory. 3. Connect the TFTP server and WTR-M2133HP. 4. Hold down the AOSS button, then power on the router. 5. After booting OpenWrt initramfs image, connect to the router by SSH. 6. Transfer "squashfs-nand-factory.ubi" to the router. 7. Execute the following commands. # ubidetach -p /dev/mtd15 # ubiformat /dev/mtd15 -f /tmp/openwrt-ipq40xx-generic-buffalo_wtr-m2133hp-squashfs-nand-factory.ubi # fw_setenv bootcmd bootipq 8. Perform reboot. Recover to stock firmware ------------------------- 1. Execute the following command. # fw_setenv bootcmd bootbf 2. Reboot and wait several minutes. Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
* ipq40xx: add support for GL.iNet GL-S1300Dongming Han2020-07-082-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SOC: Qualcomm IPQ4029 (DAKOTA) ARM Quad-Core RAM: 512 MiB FLASH1: 16 MiB NOR - SPI0 FLASH2: 8 GiB eMMC ETH: Qualcomm QCA8075 WLAN1: Qualcomm Atheros QCA4029 2.4GHz 802.11b/g/n 2x2 WLAN2: Qualcomm Atheros QCA4029 5GHz 802.11n/ac W2 2x2 INPUT: Reset, WPS LED: Power, Mesh, WLAN UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1 UART2: On board with BLE module SPI1: On board socket for Zigbee module Install via tftp - NB: need to flash transition image firstly Firstly install transition image: (IPQ40xx) # tftpboot 0x84000000 s1300-factory-to-openwrt.img (IPQ40xx) # sf probe && imgaddr=0x84000000 && source :script Secondly install openwrt sysupgrade bin: (IPQ40xx) # run lf Revert to factory image: (IPQ40xx) # tftpboot 0x84000000 s1300-openwrt-to-factory.img (IPQ40xx) # sf probe && imgaddr=0x84000000 && source :script The kernel and rootfs of factory firmware are on eMMC, and openwrt firmware is on NOR flash. The transition image includes U-boot and partition table, which decides where to load kernel and rootfs. After you firstly install openwrt image, you can switch between factory and openwrt firmware by flashing transition image. Signed-off-by: Dongming Han <handongming@gl-inet.com>
* linux-firmware: Update linux-firmware to 20200619John Audia2020-07-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git log --pretty=oneline --abbrev-commit 20200122..20200619 e96c121 (tag: 20200619, origin/main) amdgpu: update renoir firmware from 20.20 release db0402e amdgpu: update picasso firmware from 20.20 release c4e6e8f amdgpu: update raven2 firmware from 20.20 release 1967282 amdgpu: update raven firmware from 20.20 release f73f82c amdgpu: add vega20 TA firmware from 20.20 release 9ecaba8 amdgpu: update vega20 firmware from 20.20 release 3866af1 amdgpu: update vega12 firmware from 20.20 release adba945 amdgpu: update vega10 firmware from 20.20 release 3c5eef0 amdgpu: update navi10 firmware from 20.20 release 152c929 amdgpu: update navi14 firmware from 20.20 release 3890db3 (HEAD -> master, origin/master, origin/HEAD) rtl_nic: add firmware for RTL8125B 887d2a1 linux-firmware: Update firmware file for Intel Bluetooth AX200 3914943 linux-firmware: Update firmware file for Intel Bluetooth AX201 4966923 linux-firmware: Update firmware file for Intel Bluetooth 9560 5ee82c0 linux-firmware: Update firmware file for Intel Bluetooth 9260 d9880b1 Mellanox: Add new mlxsw_spectrum firmware xx.2007.1168 c2e313b rtw88: RTL8822C: update firmware version to v9.9 4d91664 Merge branch 'mrvl-prestera' of https://github.com/PLVision/linux-firmware a54dfbe Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware 51a773d cxgb4: Update firmware to revision 1.24.17.0 5611000 mrvl: add firmware for Prestera ASIC devices 8ba6fa6 (tag: 20200519) Merge tag 'iwlwifi-fw-2020-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware 5ee1c7d iwlwifi: update and add new FWs from core50-70 and core52-81 releases 401bd6d rtw88: RTL8821C: add firmware file v24.5 2ae9974 iwlwifi: update FWs to core47-142 release 50c1340 iwlwifi: update 8265 FW f8d32e4 rtw88: update firmware information and README 412f95a linux-firmware: add firmware for MT7915E 619d339 QCA: Add Bluetooth firmware for QCA9377 1392591 linux-firmware: add rebb firmware for mt7663 b2cad6a linux-firmware: Update firmware file for Intel Bluetooth AX200 c5ac1ad linux-firmware: Update firmware file for Intel Bluetooth AX201 642d115 linux-firmware: Update firmware file for Intel Bluetooth 9560 dc3047c linux-firmware: Update firmware file for Intel Bluetooth 9260 78c0348 (tag: 20200421) Use Link function for brcmfmac43362-sdio.lemaker,bananapro.txt f2df706 Add symlink for Dell XPS 15 9550 Broadcom Bluetooth patch-ram file 87dcb0e rtl_bt: Update RTL8822C BT FW to 0x0999_3AA1 3aa3ae4 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware 8aa36f5 cxgb4: Update T6 config file 6314fa0 amdgpu: update vega20 firmware for 20.10 1f308f1 amdgpu: update vega12 firmware for 20.10 1ffd569 amdgpu: update vega10 firmware for 20.10 9a0b0f4 amdgpu: update renoir firmware for 20.10 428a747 amdgpu: update raven2 firmware for 20.10 624ecdf amdgpu: update raven firmware for 20.10 7532f50 amdgpu: update picasso firmware for 20.10 75e352e amdgpu: update navi10 firmware for 20.10 3c175d1 amdgpu: update navi14 firmware for 20.10 8d7ac32 amdgpu: add navi14 TA firmware from 20.10 dd6b4db Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware 3afe520 cxgb4: Update firmware to revision 1.24.14.0 64dba0f Merge branch 'a630-zap' of https://github.com/andersson/linux-firmware 236ec45 linux-firmware: add firmware for MT7663 Wifi/BT combo device 107b9a2 Merge https://github.com/bgodavar/qca_bt_fw 5b240e5 Merge https://github.com/rjliao-qca/qca-btfw 47533bc linux-firmware: Update firmware file for Intel Bluetooth AX200 677930a linux-firmware: Update firmware file for Intel Bluetooth AX201 e6ff1e7 qcom: Add SDM845 Adreno ZAP shader firmware 1a8b0dc qca: Enable transparent WBS for WCN3991 4921f73 QCA: Add Bluetooth firmware for QCA6390 edf390c Merge branch 'v12573.77' of https://github.com/erinlo/linux_fw_scp 3c213aa mediatek: Add mt8183 SCP firmware 8eb0b28 (tag: 20200316) linux-firmware: Update firmware file for Intel Bluetooth AX200 b9f720f linux-firmware: Update firmware file for Intel Bluetooth AX201 426db50 linux-firmware: Update firmware file for Intel Bluetooth 9560 9361709 linux-firmware: Update firmware file for Intel Bluetooth 9260 3b3dd5a amdgpu: update vega20 firmware from 19.50 4871e7a amdgpu: update vega12 firmware from 19.50 4e7f0f8 amdgpu: update vega10 firmware from 19.50 fce60a9 rtl_bt: Add firmware and configuration files for RTL8822C BT UART chip d553c05 Merge branch 'tgl_huc_7.0.12_dmc_2.06' of git://anongit.freedesktop.org/drm/drm-firmware fb83402 i915: Add DMC firmware v2.06 for TGL 45d36b5 i915: add HuC firmware v7.0.12 for TGL 0148cfe Merge https://github.com/rjliao-qca/qca-btfw 94cb0a6 check_whence: python3/utf-8 support 7fa32bc Makefile: improve `make check` usefulness 4bb6805 mediatek: Remove in-tree symlinks 6f50efe Merge branch 'v1.1.4' of https://github.com/ruiwang-mtk/linux_fw_vpu 2db3978 qca: Fix blueooth firmware name for QCA6174 a8a18d1 mediatek: move MT8173 VPU FW to subfolder efcfa03 linux-firmware: Update firmware file for Intel Bluetooth AX201 83cb43e Merge https://github.com/bgodavar/qca_bt_wcn3991 54b017d qca: Add firmware files for BT chip wcn3991. 2277987 nvidia: add TU116/117 signed firmware f63922d drm/amdgpu: update to latest 19.50 firmware for raven 1168a90 Merge branch 'v1.1.4' of https://github.com/ruiwang-mtk/linux_fw_vpu_v1.1.4 0bd965d mediatek: update MT8173 VPU firmware to v1.1.4 6f89735 rtl_nic: update firmware for RTL8153A 5351afe rtl_bt: Update RTL8822C BT FW to V0x0998_C2B4 83a7c50 linux-firmware: add firmware for MT7622 feb91a4 linux-firmware: add version 2 for MT7615E b791e15 amdgpu: update to latest navi10 firmware from 19.50 0ff2f37 Revert "radeon: update oland rlc microcode from amdgpu" c2df39a Merge branch 'amlogic-vdec' of https://github.com/Elyotna/linux-firmware fb505a6 amlogic: update video decoder firmwares 6d9f399 amdgpu: add renoir firmware for 19.50 2c08b38 amdgpu: update raven2 firmware for 19.50 8846543 Merge commit '779514ec044a75ee6c9c20e52a2bf291f80d7d4e' of https://github.com/Netronome/linux-firmware 74d71b6 Merge branch 'bt-20200122' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware 779514e nfp: update Agilio SmartNIC flower firmware to rev AOTC-2.12.A.13 3055060 qca: update bluetooth firmware for QCA6174 Signed-off-by: John Audia <graysky@archlinux.us>
* ipq40xx: add support for EnGenius EMR3500Yen-Ting-Shen2020-06-132-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB NOR: 32 MiB ETH: Qualcomm Atheros QCA8072 (2 ports) USB: 1 x 2.0 (Host controller in the SoC) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button LEDS: White, Blue, Red, Orange Flash instruction: From EnGenius firmware to OpenWrt firmware: In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emr3500-squashfs-factory.bin directly. From OpenWrt firmware to EnGenius firmware: 1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8 Put the EnGenius firmware in the TFTP server directory on your computer. 2. Power up EMR3500. Press 4 and then press any key to enter u-boot. 3. Download EnGenius firmware (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emr3500-nor-fw-s.img 4. Flash the firmware (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script 5. Reboot (IPQ40xx) # reset Signed-off-by: Yen-Ting-Shen <frank.shen@senao.com> [squashed update patch, updated to 5.4, dropped BOARD_NAME, migrated to SOC] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* cypress-firmware: add PROVIDES sectionsÁlvaro Fernández Rojas2020-05-281-0/+4
| | | | | | Some firmwares are already provided by linux-firmware. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* layerscape: update ls-dpl to LSDK-20.04Yangbo Lu2020-05-071-3/+3
| | | | | | Update ls-dpl to latest LSDK-20.04. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define only one package for ls-dplYangbo Lu2020-05-071-24/+12
| | | | | | | | | We do not have to define package for each board, and consider variant's installing. It is easier to maintain ls-dpl with only one package installing all 4 files as intermediate files. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-mc to LSDK-20.04Yangbo Lu2020-05-071-5/+5
| | | | | | Update ls-mc to latest LSDK-20.04. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define only one package for ls-mcYangbo Lu2020-05-071-20/+8
| | | | | | | | | We do not have to define package for each board, and consider variant's installing. It is easier to maintain ls-mc with only one package installing all two images as intermediate files. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ppfe-firmware to LSDK-20.04Yangbo Lu2020-05-071-3/+3
| | | | | | Update ppfe-firmware to latest LSDK-20.04. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-26 03:37:45 +0000