aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* glibc: update to latest 2.32 commit (bug 27256)Hans Dedecker2021-01-311-2/+2
| | | | | | 760e1d2878 gconv: Fix assertion failure in ISO-2022-JP-3 module (bug 27256) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mvebu: omnia: make initramfs image usable out of the boxPetr Štetiar2021-01-311-2/+2
| | | | | | | | | | | | | | | Currently it's not possible to boot the device with just initramfs image without additional effort as the initramfs image doesn't contain device tree. Fix it by producing FIT based image which could be booted with following commands: setenv bootargs earlyprintk console=ttyS0,115200 tftpboot ${kernel_addr_r} openwrt-mvebu-cortexa9-cznic_turris-omnia-initramfs-kernel.bin bootm ${kernel_addr_r} Acked-by: Klaus Kudielka <klaus.kudielka@gmail.com> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* tools/zstd: compile with cmakeRosen Penev2021-01-302-3/+9
| | | | | | | | It's faster and more reliable. Removed ccache cmake build dependency as it's now implicit. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/zstd: update to 1.4.8Rosen Penev2021-01-302-65/+3
| | | | | | | Switch to the normal tarball instead of the codeload generated one. The latter has the potential to change hashes based on changes in the repo. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* rules: fix empty COMMITCOUNT/AUTORELEASEPaul Spooren2021-01-301-2/+2
| | | | | | | | | | | | | | | | | | | | | Packages that are in-tree only often lack a PKG_VERSION and only use the PKG_RELEASE to mark changes. Using COMMITCOUNT/AUTORELEASE variables causes an issue as both variables are empty during the metadata DUMP phase. Instead of leaving these variables empty and causing an error message like below, set the variables to 0 during dumping. On actual building the variable is evaluated causing in a value above 0. ERROR: please fix package/utils/px5g-wolfssl/Makefile - \ see logs/package/utils/px5g-wolfssl/dump.txt for details Makefile:48: *** Package/px5g-wolfssl is missing the VERSION field. Stop. Reported-by: Daniel Golle <daniel@makrotopia.org> Reported-by: Stijn Segers <foss@volatilesystems.org> Reported-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Paul Spooren <mail@aparcar.org>
* odhcpd: update to latest git HEADHans Dedecker2021-01-301-3/+3
| | | | | | 8d8a8cd dhcpv6-ia: apply prefix_filter on dhcpv6 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* trusted-firmware-a.mk: pass package version as version identifierAndre Heider2021-01-301-0/+1
| | | | | | | Upon boot it now prints: NOTICE: BL1: v2.4(release):OpenWRT v2.4-1 (espressobin-v3-v5-1gb-2cs) (Marvell-devel-18.12.0) Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: pass commit ids to a3700-utils/mv-ddr-marvellAndre Heider2021-01-303-0/+29
| | | | | | | | | The two required tools fail to identify their version when not compiling from a git clone, patch that in and pass on the used commit hashes. Upon boot it now prints "WTMI-devel-18.12.1-5598e150". Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: bump espressobin boards to CPU_1000_DDR_800Andre Heider2021-01-301-6/+6
| | | | | | | | | | | | | The cpufreq issue has been identified and a fix is in the process of beeing upstreamed [0]. Bump the boards to the default 1000MHz so they can run at that frequency once the fix is merged. Until then the boards are stuck at 800MHz (just claiming to run 1000Hz, which is a lie). [0] https://lore.kernel.org/linux-arm-kernel/20210114124032.12765-1-pali@kernel.org/ Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update to v2.4Andre Heider2021-01-302-12/+12
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
* uboot-mvebu: update to v2021.01Andre Heider2021-01-304-533/+2
| | | | | | | u-boot now detects emmc variants at runtime, we don't need to build seperate binaries anymore. Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: don't build emmc variantsAndre Heider2021-01-301-55/+0
| | | | | | | Starting with u-boot v2021.01 a single binary will be used for non-emmc and emmc variants. Signed-off-by: Andre Heider <a.heider@gmail.com>
* mvebu: LS421DE: fix the thermal zonesDaniel González Cabanelas2021-01-301-13/+42
| | | | | | | | | | | | | | | | | | | | | | The thermal zones kernel documentation is misleading, we cannot use more than one sensor in a thermal zone node. Furthermore the drivetemp driver for some reason it only catches one sensor from the hard drives array (the first available). In the Buffalo Linkstation LS421DE board there is also a sensor at the ethernet phy chip that can also be monitored. Very useful to stop the fan when there are no hard drives in the bays. (It might be also possible to add the CPU sensor, but it requires kernel patching for registering the sensor via device tree, using the function: devm_thermal_zone_of_sensor_register) Fix the thermal zones to use only one sensor per node and add the ethernet phy sensor. Also adjust the hdd temperatures to be more conservative for a mechanical hard drive. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* strace: update package to v5.10Geordan Neukum2021-01-301-2/+2
| | | | | | | | | | v5.10 has been released for strace. As such, let's go ahead bring in the latest version of this package. See here for the changelog: https://github.com/strace/strace/releases/tag/v5.10 Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
* base-files: mount pstore if presentBrian Norris2021-01-291-0/+1
| | | | | | | | Pstore (persistent store) can be used to stash debug information (kernel console, panics, ftrace) across reboots or crashes. If the filesystem is present, mount it. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* ath10k-ct: update to latest versionMichael Yartys2021-01-291-3/+3
| | | | | | | | | Changelog: - ath10k-ct: Pull in some upstream patches. Runtime-tested on ipq806x (Netgear R7800). Signed-off-by: Michael Yartys <michael.yartys@gmail.com>
* ca-certicficates: Update to version 20210119Paul Menzel2021-01-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the ca-certificates and ca-bundle package from version 20200601 to version 2021019. This version uses Python 3 for the build, fixing a build issue on systems, where `/usr/bin/python3` is a wrapper script [1]. Debian change-log entry [2]: > [ Julien Cristau ] > * New maintainer (closes: #976406) > * mozilla/{certdata.txt,nssckbi.h}: Update Mozilla certificate > authority > bundle to version 2.46. > The following certificate authorities were added (+): > + "certSIGN ROOT CA G2" > + "e-Szigno Root CA 2017" > + "Microsoft ECC Root Certificate Authority 2017" > + "Microsoft RSA Root Certificate Authority 2017" > + "NAVER Global Root Certification Authority" > + "Trustwave Global Certification Authority" > + "Trustwave Global ECC P256 Certification Authority" > + "Trustwave Global ECC P384 Certification Authority" > The following certificate authorities were removed (-): > - "EE Certification Centre Root CA" > - "GeoTrust Universal CA 2" > - "LuxTrust Global Root 2" > - "OISTE WISeKey Global Root GA CA" > - "Staat der Nederlanden Root CA - G2" (closes: #962079) > - "Taiwan GRCA" > - "Verisign Class 3 Public Primary Certification Authority - G3" > > [ Michael Shuler ] > * mozilla/blacklist: > Revert Symantec CA blacklist (#911289). Closes: #962596 > The following root certificates were added back (+): > + "GeoTrust Primary Certification Authority - G2" > + "VeriSign Universal Root Certification Authority" > > [ Gianfranco Costamagna ] > * debian/{rules,control}: > Merge Ubuntu patch from Matthias Klose to use Python3 during build. > Closes: #942915 [1]: https://github.molgen.mpg.de/mariux64/mxtools/issues/148 [2]: https://metadata.ftp-master.debian.org/changelogs//main/c/ca-certificates/ca-certificates_20210119_changelog Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
* ramips: add support for ELECOM WRC-2533GHBK-IINAGAKI Hiroshi2021-01-294-1/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WRC-2533GHBK-I is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, RX, GND, TX from SoC side - 57600n8 - Power : 12VDC, 1.5A Flash instruction using factory image: 1. Boot WRC-2533GHBK-I normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~150 seconds to complete flashing MAC addresses: LAN : BC:5C:4C:xx:xx:89 (Config, ethaddr (text)) WAN : BC:5C:4C:xx:xx:88 (Config, wanaddr (text)) 2.4GHz : BC:5C:4C:xx:xx:8A (Factory, 0x4 (hex)) 5GHz : BC:5C:4C:xx:xx:8B (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
* build: add elecom-product-header for ELECOM devicesINAGAKI Hiroshi2021-01-292-7/+15
| | | | | | | | | A header used in ELECOM WRC-300GHBK2-I and WRC-1750GHBK2-I/C is also used in ELECOM WRC-2533GHBK-I, so split the code to generate the header and move it to image-commands.mk to use from ramips target. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
* base-files: remove execute bit and shebang from functions.shAdrian Schmutzler2021-01-292-3/+2
| | | | | | | | | | | /lib/functions.sh was executable for no obvious reason and its execute property was even checked in package-ipkg.mk just to source it afterwards. Remove the execute bit and shebang as this is clearly a library. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
* treewide: drop shebang from non-executable lib filesAdrian Schmutzler2021-01-2923-33/+2
| | | | | | | | | | | | This drops the shebang from another bunch of files in various /lib folders, as these are sourced and the shebang is useless. Fix execute bit in one case, too. This should cover almost all trivial cases now, i.e. where /lib is actually used for library files. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.93John Audia2021-01-2929-49/+49
| | | | | | | | | | | | | | | | | All modification made by update_kernel.sh in a fresh clone without existing toolchains. Build system: x86_64 Build-tested: ipq806x/R7800, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 Compile-tested [*]: ath79/{tiny,generic}, ipq40xx, octeon, ramips/mt7621, realtek, x86/64 Run-tested [*]: ath79/generic, ipq40xx, octeon, ramips/mt7621 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
* bcm63xx: fix bcm63xx ethernet kernel panicsÁlvaro Fernández Rojas2021-01-287-17/+52
| | | | | | | | | | | | Calling netdev_reset_queue() from _stop() functions is causing sporadic kernel panics on bcm63xx, which happen mainly on BCM6318 and BCM6328. This reverts to the previous behaviour, which called netdev_reset_queue() from _open() functions. Tested on Comtrend AR-5315u (BCM6318). Fixes: 1d6f422e346b ("bcm63xx: sync ethernet driver with net-next") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* scripts: sources CDN as fallback in download.plPaul Spooren2021-01-271-1/+1
| | | | | | | | | In case the default sources for a package fail use the CDN rather than our own mirror. In case the CDN fails, fallback to our mirror. Also remove mirror1 which isn't available anymore. Signed-off-by: Paul Spooren <mail@aparcar.org>
* sunxi: add support for linksprite pcDuino3 nano boardJiang Yongquan2021-01-274-1/+16
| | | | | | | | | | | | | | | | | | Specifications: - SoC: Allwinner A20 @ 1Ghz - DRAM: 1GiB DDR3 @ 408MHz (K4B4G1646Q-HYK0) - NAND: 4GB MLC NAND (H27UBG8T2BTR-BC) - Ethernet: 10/100/1000Mbps Ethernet (Realtek RTL8211E) Flash instructions: dd if=openwrt-sunxi-cortexa7-linksprite_pcduino3-nano-ext4-sdcard.img of=/dev/sdX Signed-off-by: Jiang Yongquan <woxwchc@foxmail.com> [Remove CONFIG_REALTEK_PHY from sunxi/cortexa53 config] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rockchip: fix SUPPORTED_DEVICES for Radxa ROCK Pi 4Marty Jones2021-01-271-1/+2
| | | | | | | | | | | This sets SUPPORTED_DEVICES to match the compatible in the DTS. While at it, synchronize the capitalization in DEVICE_MODEL and DTS model. Signed-off-by: Marty Jones <mj8263788@gmail.com> [commit title/message facelift, move variable in armv8.mk] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm4908: sort and wrap build recipesAdrian Schmutzler2021-01-271-12/+16
| | | | | | | | | | This sorts the Build recipes alphabetically, wraps some long lines and moves the DEVICE_VARS to the top like common on several other targets. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: remove generic profilesAdrian Schmutzler2021-01-273-45/+0
| | | | | | | | | | We have support for reference boards available on this target, so support for an additional generic profile does not make much sense. Remove it to have one thing less to maintain. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Paul Spooren <mail@aparcar.org>
* kirkwood: remove generic profileAdrian Schmutzler2021-01-271-17/+0
| | | | | | | | | | | On a platform with many very different devices, like found on kirkwood, the generic profile seems like a remnant of the past that does not have a real use anymore. Remove it to have one thing less to maintain. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Paul Spooren <mail@aparcar.org>
* ipq806x: remove generic profileAdrian Schmutzler2021-01-271-10/+0
| | | | | | | | | | | On a platform with many very different devices, like found on ipq806x, the generic profile seems like a remnant of the past that does not have a real use anymore. Remove it to have one thing less to maintain. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Paul Spooren <mail@aparcar.org>
* ipq40xx: remove generic profileAdrian Schmutzler2021-01-271-9/+0
| | | | | | | | | | | On a platform with many very different devices, like found on ipq40xx, the generic profile seems like a remnant of the past that does not have a real use anymore. Remove it to have one thing less to maintain. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Paul Spooren <mail@aparcar.org>
* ramips: remove generic profilesAdrian Schmutzler2021-01-275-89/+0
| | | | | | | | | | | | | On a platform with many very different devices, like found on ramips, the generic profiles seem like remnants of the past that do not have a real use anymore. Remove them to have one thing less to maintain. Actually, rt288x didn't have a default profile in the first place. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Paul Spooren <mail@aparcar.org>
* ath79: remove generic profilesAdrian Schmutzler2021-01-274-61/+0
| | | | | | | | | | | On a platform with many very different devices, like found on ath79, the generic profiles seem like remnants of the past that do not have a real use anymore. Remove them to have one thing less to maintain. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Paul Spooren <mail@aparcar.org>
* mt76: update to the latest versionFelix Fietkau2021-01-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | 65abbcd9f6fb mt76: usb: process URBs with status EPROTO properly 3199ef5fa35e mt76: mt7615: set mcu country code in mt7615_mcu_set_channel_domain() 5c86d5bb079b mt76: mt7915: Remove unneeded semicolon 3f546330b59d mt76: mt7915: support TxBF for DBDC 032ad7e02545 mt76: mt7615: unify init work cc3f23d1e654 mt76: mt7915: bring up the WA event rx queue for band1 fa3d334a0e22 mt76: fix crash on tearing down ext phy c4c9c402d14a mt76: mt7915: fix vif sta index for DBDC eca2f0ec0d4c mt76: mt7915: fix command id for txbf action c828124ef9a5 mt76: mt7915: add support for using a secondary PCIe link for gen1 dbaf0f4679f3 mt76: mt7915: make vif index per adapter instead of per band fb3e5ce1eb00 mt76: move vif_mask back from mt76_phy to mt76_dev be2bea66d6e3 mt76: mt7915: detect wrong nss eeprom parameter on dbdc cards 8dc5d4a0da7c Revert "mt76: mt7915: fix vif sta index for DBDC" 8c796a33781c mt76: mt7915: only set int1 when using the second hif 4eb5caaf6cc1 mt76: reduce q->lock hold time 0714890bf0fd mt76: mt7615: reduce VHT maximum MPDU length 2f85aa5cbc62 mt76: mt7915: avoid writes to MT_PCIE_RECOG_ID when not using gen1 devices 8696919d9aae mt76: dma: fix a possible memory leak in mt76_add_fragment() Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: use lzma-loader on zbtlink devicesFelix Fietkau2021-01-271-0/+3
| | | | | | Fixes boot loader LZMA decompression issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: bump Copyright to 2021Paul Spooren2021-01-261-1/+1
| | | | | | | | | | This commit is only added to keep the PKG_RELEASE correct after fixing the $(COMMITCOUNT) logic in the previous commit. This way the PKG_RELEASE stays the same while the compiled packages content isn't changed. Signed-off-by: Paul Spooren <mail@aparcar.org>
* rules: fix COMMITCOUNT logicPaul Spooren2021-01-261-1/+1
| | | | | | | | | | | | | | | | | | The newly added $(COMMITCOUNT) variable was wrongly increased by plus one. The addition should have been only added to $(AUTORELEASE) as OpenWrt traditionally starts counting at one rather than zero. $(AUTORELEASE) counts the commits since the last bump, which is zero on the version bump commit itself. This commit increases $(AUTORELEASE) by one while leaving $(COMMITCOUNT) as is. The base-files package is the only package using $(COMMITCOUNT) so far and requires a pseudo commit to keep the PKG_RELEASE correct. A non functional change (Copyright bump) is done in the next commit. Signed-off-by: Paul Spooren <mail@aparcar.org>
* px5g-wolfssl: Fix certificate signatureJeffrey Elms2021-01-262-3/+3
| | | | | | | | | | Certificate signature algorithm was being set after call to `wc_MakeCert`, resulting in a mismatch between specified signature in certificate and the actual signature type. Signed-off-by: Jeffrey Elms <jeff@wolfssl.com> [fix commit subject, use COMMITCOUNT] Signed-off-by: Paul Spooren <mail@aparcar.org>
* toolchain/libstdcpp: disable dual ABI and default to newRosen Penev2021-01-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | | GCC 5.1 changed the std::string ABI in order to properly support C++11. For compatibility with libraries compiled with the older ABI, that is, linking between old-abi.so and new-abi.bin, both ABIs are enabled. In terms of OpenWrt, all packages are compiled with the same toolchain, which means these issues do not need to be handled. Most importantly, this results in a significant size reduction of libstdpp: Before: 450794 bytes After: 327752 bytes Tested with all OpenWrt packages. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* umdns: bump to 2021-01-26Paul Spooren2021-01-261-5/+5
| | | | | | | | * i78aa36b umdns: fix 64-bit time format string * start using $(AUTORELEASE) * Update Copyright Signed-off-by: Paul Spooren <mail@aparcar.org>
* mac80211: fix an uninitialized variable warningFelix Fietkau2021-01-265-48/+51
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: minstrel_ht: fix regression in the max_prob_rate fixFelix Fietkau2021-01-261-0/+23
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove accidentally duplicated line in minstrel_ht patchFelix Fietkau2021-01-261-2/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* realtek: add debugfs support for mirroringBirger Koblitz2021-01-261-14/+391
| | | | | | This adds debugfs support to monitor mirroring via debugfs Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: add API for the hw tables of RTL83XX/93XX SoCsBirger Koblitz2021-01-261-100/+436
| | | | | | | | Add a table API that has per accss register locking and uses register description information to handle all table access through a single set of api calls. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: add switch driver support for the RTL93XX based switchesBirger Koblitz2021-01-265-245/+1522
| | | | | | | Adds support for the RTL9300 and RTL9310 series of switches with 10GBit per port and up to 56 ports. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: add internal and external SDS/PHYs of RTL9300 devicesBirger Koblitz2021-01-262-28/+523
| | | | | | | | This adds support for the internal SerDes of the RTL9300 SoC and for the RTL8218D and RTL8226B phys found in combination with this SoC in switches. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: fix RTL8231 gpio expander usage with RTL839X SoCBirger Koblitz2021-01-261-24/+40
| | | | | | | | This fixes the usage of the RTL8231 GPIO extender chip when used with the RTL839X SoCs. Specifically, the PHY addresses may be different from 0. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: enable default rate limiting and qos settingsBirger Koblitz2021-01-261-64/+0
| | | | | | | Enable default rate limiting and QoS support. Remove previous storm control code. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: correct l2 offloading tag handlingBirger Koblitz2021-01-261-4/+7
| | | | | | | Makes sure the DSA trailer information on any L2 offloading done by the switch is honoured by the bridge layer Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-29 07:54:50 +0000