aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/image
diff options
context:
space:
mode:
authorYanase Yuki <dev@zpc.sakura.ne.jp>2020-04-21 15:06:12 +0900
committerPetr Štetiar <ynezz@true.cz>2020-12-25 10:38:13 +0100
commit3bb16185737c011b74e3166cf436785604b5f47f (patch)
tree42aad308db2862e0d08edf9b8c2949c3f56ca5f0 /target/linux/ipq806x/image
parentd64102e00a8e3aebda8427df3b2c36bf4639928f (diff)
downloadupstream-3bb16185737c011b74e3166cf436785604b5f47f.tar.gz
upstream-3bb16185737c011b74e3166cf436785604b5f47f.tar.bz2
upstream-3bb16185737c011b74e3166cf436785604b5f47f.zip
ipq806x: add support for NEC Platforms Aterm WG2600HP3
NEC Platforms Aterm WG2600HP3 is a dual-band router based on Qualcomm IPQ8062. Specification ------------- - SoC: Qualcomm IPQ8062 - RAM: 512MiB - Flash memory: SPI-NOR 32MiB (Cypress S25FL256S) - Wi-Fi: Qualcomm QCA9984 (2.4GHz, 1ch - 13ch) - Wi-Fi: Qualcomm QCA9984 (5GHz, 36ch - 64ch, 100ch - 140ch) - Ethernet: 4x 100/1000 Mbps (1x WAN, 4x LAN) - LED: 6x green LED, 6x red LED - Input: 2x tactile switch, 1x SP3T slide switch - Serial console: 115200bps, through-hole J3 - [ ] [GND] [ ] [TX] [RX] ----> DC jack - Power: DC 12V 1.5A This device does not support VHT160 and VHT80+80. Custom BDFs are required to limit VHT capabilities. Flash instructions ------------------ 1. Setup TFTP server (IP address: 192.168.1.2) 2. Put initramfs image into TFTP server directory 3. Connect WG2600HP3 lan port and computer that runs TFTP server 4. Connect to the serial console 5. Interrupt booting by Esc key (password: chiron) 6. Execute the following commands # setenv bootcmd "nboot 0x44000000 1 0x860000" # saveenv # setenv ipaddr 192.168.1.1 # setenv serverip 192.168.1.2 # tftpboot 0x44000000 openwrt-ipq806x-generic-nec_wg2600hp3-initramfs-uImage 7. After booting OpenWrt initramfs image, backup SPI-NOR flash memory 8. Erase firmware partition # mtd erase firmware 9. Run sysupgrade Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
Diffstat (limited to 'target/linux/ipq806x/image')
-rw-r--r--target/linux/ipq806x/image/Makefile14
1 files changed, 14 insertions, 0 deletions
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index ad7c4b94d2..80bfec5ad9 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -193,6 +193,20 @@ define Device/nec_wg2600hp
endef
TARGET_DEVICES += nec_wg2600hp
+define Device/nec_wg2600hp3
+ $(call Device/LegacyImage)
+ DEVICE_VENDOR := NEC Platforms
+ DEVICE_MODEL := Aterm WG2600HP3
+ SOC := qcom-ipq8062
+ BLOCKSIZE := 64k
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform -kmod-usb-ohci -kmod-usb2 \
+ -kmod-usb-ledtrig-usbport -kmod-usb-phy-qcom-dwc3 -kmod-usb3 -kmod-usb-dwc3-qcom \
+ ath10k-firmware-qca9984-ct ipq-wifi-nec_wg2600hp3
+endef
+TARGET_DEVICES += nec_wg2600hp3
+
define Device/netgear_d7800
$(call Device/DniImage)
DEVICE_VENDOR := NETGEAR