diff options
Diffstat (limited to 'target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch')
| -rw-r--r-- | target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch | 149 |
1 files changed, 0 insertions, 149 deletions
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch b/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch deleted file mode 100644 index 97348131ef..0000000000 --- a/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch +++ /dev/null @@ -1,149 +0,0 @@ -From 9ba5a56b7241c46aa47544f8414ad1f3d445f3c1 Mon Sep 17 00:00:00 2001 -From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> -Date: Mon, 7 May 2018 11:52:04 +0530 -Subject: [PATCH] arm64: dts: ls1012a: Add more nodes to LS1012A-FRWY board - support - -LS1012A-FRWY is a different design from LS1012A-FRDM, -but has some common SoC features. Key feature on this -board is 2x1G SGMII PFE MAC, Micro SD, USB 3.0, DDR, -QuadSPI, Audio, UART. - -Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> -Signed-off-by: Li Yang <leoyang.li@nxp.com> ---- - arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts | 118 +++++++++++++++++++++ - 1 file changed, 118 insertions(+) - ---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts -+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts -@@ -14,6 +14,58 @@ - / { - model = "LS1012A FRWY Board"; - compatible = "fsl,ls1012a-frwy", "fsl,ls1012a"; -+ -+ aliases { -+ ethernet0 = &pfe_mac0; -+ ethernet1 = &pfe_mac1; -+ }; -+ -+ sys_mclk: clock-mclk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <25000000>; -+ }; -+ -+ reg_1p8v: regulator-1p8v { -+ compatible = "regulator-fixed"; -+ regulator-name = "1P8V"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-always-on; -+ }; -+ -+ sound { -+ compatible = "simple-audio-card"; -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,widgets = -+ "Microphone", "Microphone Jack", -+ "Headphone", "Headphone Jack", -+ "Speaker", "Speaker Ext", -+ "Line", "Line In Jack"; -+ simple-audio-card,routing = -+ "MIC_IN", "Microphone Jack", -+ "Microphone Jack", "Mic Bias", -+ "LINE_IN", "Line In Jack", -+ "Headphone Jack", "HP_OUT", -+ "Speaker Ext", "LINE_OUT"; -+ -+ simple-audio-card,cpu { -+ sound-dai = <&sai2>; -+ frame-master; -+ bitclock-master; -+ }; -+ -+ simple-audio-card,codec { -+ sound-dai = <&codec>; -+ frame-master; -+ bitclock-master; -+ system-clock-frequency = <25000000>; -+ }; -+ }; -+}; -+ -+&pcie { -+ status = "okay"; - }; - - &duart0 { -@@ -22,4 +74,70 @@ - - &i2c0 { - status = "okay"; -+ -+ codec: sgtl5000@a { -+ compatible = "fsl,sgtl5000"; -+ #sound-dai-cells = <0>; -+ reg = <0xa>; -+ VDDA-supply = <®_1p8v>; -+ VDDIO-supply = <®_1p8v>; -+ clocks = <&sys_mclk>; -+ }; -+}; -+ -+&qspi { -+ num-cs = <1>; -+ bus-num = <0>; -+ status = "okay"; -+ -+ qflash0: w25q16dw@0 { -+ compatible = "spansion,m25p80"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ m25p,fast-read; -+ spi-max-frequency = <20000000>; -+ reg = <0>; -+ }; -+}; -+ -+&pfe { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ethernet@0 { -+ compatible = "fsl,pfe-gemac-port"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x0>; /* GEM_ID */ -+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */ -+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */ -+ fsl,mdio-mux-val = <0x0>; -+ phy-mode = "sgmii"; -+ fsl,pfe-phy-if-flags = <0x0>; -+ -+ mdio@0 { -+ reg = <0x1>; /* enabled/disabled */ -+ }; -+ }; -+ -+ ethernet@1 { -+ compatible = "fsl,pfe-gemac-port"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x1>; /* GEM_ID */ -+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */ -+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */ -+ fsl,mdio-mux-val = <0x0>; -+ phy-mode = "sgmii"; -+ fsl,pfe-phy-if-flags = <0x0>; -+ -+ mdio@0 { -+ reg = <0x0>; /* enabled/disabled */ -+ }; -+ }; -+}; -+ -+&sai2 { -+ status = "okay"; - }; |