kernel: delete Linux 5.4 config and patches

As the upcoming release will be based on Linux 5.10 only, remove all
kernel configuration as well as patches for Linux 5.4.
There were no targets still actively using Linux 5.4.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3a14580411adfb75f9a44eded9f41245b9e44606)

1 files changed, 0 insertions, 149 deletions

diff --git a/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch b/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch
deleted file mode 100644
index 97348131ef..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From 9ba5a56b7241c46aa47544f8414ad1f3d445f3c1 Mon Sep 17 00:00:00 2001
-From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Date: Mon, 7 May 2018 11:52:04 +0530
-Subject: [PATCH] arm64: dts: ls1012a: Add more nodes to LS1012A-FRWY board
- support
-
-LS1012A-FRWY is a different design from LS1012A-FRDM,
-but has some common SoC features. Key feature on this
-board is 2x1G SGMII PFE MAC, Micro SD, USB 3.0, DDR,
-QuadSPI, Audio, UART.
-
-Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts | 118 +++++++++++++++++++++
- 1 file changed, 118 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
-@@ -14,6 +14,58 @@
- / {
- 	model = "LS1012A FRWY Board";
- 	compatible = "fsl,ls1012a-frwy", "fsl,ls1012a";
-+
-+	aliases {
-+		ethernet0 = &pfe_mac0;
-+		ethernet1 = &pfe_mac1;
-+	};
-+
-+	sys_mclk: clock-mclk {
-+		compatible = "fixed-clock";
-+		#clock-cells = <0>;
-+		clock-frequency = <25000000>;
-+	};
-+
-+	reg_1p8v: regulator-1p8v {
-+		compatible = "regulator-fixed";
-+		regulator-name = "1P8V";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
-+		regulator-always-on;
-+	};
-+
-+	sound {
-+		compatible = "simple-audio-card";
-+		simple-audio-card,format = "i2s";
-+		simple-audio-card,widgets =
-+			"Microphone", "Microphone Jack",
-+			"Headphone", "Headphone Jack",
-+			"Speaker", "Speaker Ext",
-+			"Line", "Line In Jack";
-+		simple-audio-card,routing =
-+			"MIC_IN", "Microphone Jack",
-+			"Microphone Jack", "Mic Bias",
-+			"LINE_IN", "Line In Jack",
-+			"Headphone Jack", "HP_OUT",
-+			"Speaker Ext", "LINE_OUT";
-+
-+		simple-audio-card,cpu {
-+			sound-dai = <&sai2>;
-+			frame-master;
-+			bitclock-master;
-+		};
-+
-+		simple-audio-card,codec {
-+			sound-dai = <&codec>;
-+			frame-master;
-+			bitclock-master;
-+			system-clock-frequency = <25000000>;
-+		};
-+	};
-+};
-+
-+&pcie {
-+	status = "okay";
- };
- 
- &duart0 {
-@@ -22,4 +74,70 @@
- 
- &i2c0 {
- 	status = "okay";
-+
-+	codec: sgtl5000@a {
-+		compatible = "fsl,sgtl5000";
-+		#sound-dai-cells = <0>;
-+		reg = <0xa>;
-+		VDDA-supply = <&reg_1p8v>;
-+		VDDIO-supply = <&reg_1p8v>;
-+		clocks = <&sys_mclk>;
-+	};
-+};
-+
-+&qspi {
-+	num-cs = <1>;
-+	bus-num = <0>;
-+	status = "okay";
-+
-+	qflash0: w25q16dw@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		m25p,fast-read;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+	};
-+};
-+
-+&pfe {
-+	status = "okay";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	ethernet@0 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x0>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x1>; /* enabled/disabled */
-+		};
-+	};
-+
-+	ethernet@1 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x1>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x0>; /* enabled/disabled */
-+		};
-+	};
-+};
-+
-+&sai2 {
-+	status = "okay";
- };