aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.15/950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
diff options
context:
space:
mode:
authorPetr Štetiar <ynezz@true.cz>2022-08-22 14:02:36 +0200
committerPetr Štetiar <ynezz@true.cz>2022-08-23 10:37:04 +0200
commitca5c695a4522091234026e22e8336f05d65602ba (patch)
tree7ea3f3abfa9a15e8fee51408918a6a0671062409 /target/linux/bcm27xx/patches-5.15/950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
parentd1163fd13f6498826d202f0b58cedf32d7891d52 (diff)
downloadupstream-ca5c695a4522091234026e22e8336f05d65602ba.tar.gz
upstream-ca5c695a4522091234026e22e8336f05d65602ba.tar.bz2
upstream-ca5c695a4522091234026e22e8336f05d65602ba.zip
kernel: bump 5.15 to 5.15.62
Deleted following upstreamed patches: bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch Manually rebased following patches: bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch Runtime tested on turris-omnia and glinet-b1300. Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200] Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/bcm27xx/patches-5.15/950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.15/950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch41
1 files changed, 21 insertions, 20 deletions
diff --git a/target/linux/bcm27xx/patches-5.15/950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch b/target/linux/bcm27xx/patches-5.15/950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
index 715f9b1930..7bb57aafa5 100644
--- a/target/linux/bcm27xx/patches-5.15/950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
+++ b/target/linux/bcm27xx/patches-5.15/950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
@@ -35,18 +35,19 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
return VC4_SCALING_PPF;
else
return VC4_SCALING_TPZ;
-@@ -388,14 +388,10 @@ static int vc4_plane_setup_clipping_and_
+@@ -388,15 +388,10 @@ static int vc4_plane_setup_clipping_and_
for (i = 0; i < num_planes; i++)
vc4_state->offsets[i] = bo->paddr + fb->offsets[i];
-- /* We don't support subpixel source positioning for scaling,
+- /*
+- * We don't support subpixel source positioning for scaling,
- * but fractional coordinates can be generated by clipping
- * so just round for now
- */
-- vc4_state->src_x = DIV_ROUND_CLOSEST(state->src.x1, 1<<16);
-- vc4_state->src_y = DIV_ROUND_CLOSEST(state->src.y1, 1<<16);
-- vc4_state->src_w[0] = DIV_ROUND_CLOSEST(state->src.x2, 1<<16) - vc4_state->src_x;
-- vc4_state->src_h[0] = DIV_ROUND_CLOSEST(state->src.y2, 1<<16) - vc4_state->src_y;
+- vc4_state->src_x = DIV_ROUND_CLOSEST(state->src.x1, 1 << 16);
+- vc4_state->src_y = DIV_ROUND_CLOSEST(state->src.y1, 1 << 16);
+- vc4_state->src_w[0] = DIV_ROUND_CLOSEST(state->src.x2, 1 << 16) - vc4_state->src_x;
+- vc4_state->src_h[0] = DIV_ROUND_CLOSEST(state->src.y2, 1 << 16) - vc4_state->src_y;
+ vc4_state->src_x = state->src.x1;
+ vc4_state->src_y = state->src.y1;
+ vc4_state->src_w[0] = state->src.x2 - vc4_state->src_x;
@@ -54,7 +55,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
vc4_state->crtc_x = state->dst.x1;
vc4_state->crtc_y = state->dst.y1;
-@@ -448,7 +444,7 @@ static void vc4_write_tpz(struct vc4_pla
+@@ -449,7 +444,7 @@ static void vc4_write_tpz(struct vc4_pla
{
u32 scale, recip;
@@ -63,7 +64,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
/* The specs note that while the reciprocal would be defined
* as (1<<32)/scale, ~0 is close enough.
-@@ -494,7 +490,7 @@ static u32 vc4_lbm_size(struct drm_plane
+@@ -495,7 +490,7 @@ static u32 vc4_lbm_size(struct drm_plane
if (vc4_state->x_scaling[0] == VC4_SCALING_TPZ)
pix_per_line = vc4_state->crtc_w;
else
@@ -72,7 +73,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
if (!vc4_state->is_yuv) {
if (vc4_state->y_scaling[0] == VC4_SCALING_TPZ)
-@@ -585,7 +581,8 @@ static void vc4_plane_calc_load(struct d
+@@ -586,7 +581,8 @@ static void vc4_plane_calc_load(struct d
for (i = 0; i < fb->format->num_planes; i++) {
/* Even if the bandwidth/plane required for a single frame is
*
@@ -82,7 +83,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
*
* when downscaling, we have to read more pixels per line in
* the time frame reserved for a single line, so the bandwidth
-@@ -594,11 +591,11 @@ static void vc4_plane_calc_load(struct d
+@@ -595,11 +591,11 @@ static void vc4_plane_calc_load(struct d
* load by this number. We're likely over-estimating the read
* demand, but that's better than under-estimating it.
*/
@@ -98,7 +99,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
vc4_state->hvs_load += vc4_state->crtc_h * vc4_state->crtc_w;
}
-@@ -751,7 +748,8 @@ static int vc4_plane_mode_set(struct drm
+@@ -752,7 +748,8 @@ static int vc4_plane_mode_set(struct drm
bool mix_plane_alpha;
bool covers_screen;
u32 scl0, scl1, pitch0;
@@ -108,7 +109,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
u32 hvs_format = format->hvs;
unsigned int rotation;
int ret, i;
-@@ -763,6 +761,9 @@ static int vc4_plane_mode_set(struct drm
+@@ -764,6 +761,9 @@ static int vc4_plane_mode_set(struct drm
if (ret)
return ret;
@@ -118,7 +119,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
/* SCL1 is used for Cb/Cr scaling of planar formats. For RGB
* and 4:4:4, scl1 should be set to scl0 so both channels of
* the scaler do the same thing. For YUV, the Y plane needs
-@@ -783,9 +784,11 @@ static int vc4_plane_mode_set(struct drm
+@@ -784,9 +784,11 @@ static int vc4_plane_mode_set(struct drm
DRM_MODE_REFLECT_Y);
/* We must point to the last line when Y reflection is enabled. */
@@ -132,7 +133,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
switch (base_format_mod) {
case DRM_FORMAT_MOD_LINEAR:
-@@ -800,7 +803,7 @@ static int vc4_plane_mode_set(struct drm
+@@ -801,7 +803,7 @@ static int vc4_plane_mode_set(struct drm
(i ? v_subsample : 1) *
fb->pitches[i];
@@ -141,7 +142,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
(i ? h_subsample : 1) *
fb->format->cpp[i];
}
-@@ -823,7 +826,7 @@ static int vc4_plane_mode_set(struct drm
+@@ -824,7 +826,7 @@ static int vc4_plane_mode_set(struct drm
* pitch * tile_h == tile_size * tiles_per_row
*/
u32 tiles_w = fb->pitches[0] >> (tile_size_shift - tile_h_shift);
@@ -150,7 +151,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
u32 tiles_r = tiles_w - tiles_l;
u32 tiles_t = src_y >> tile_h_shift;
/* Intra-tile offsets, which modify the base address (the
-@@ -833,7 +836,7 @@ static int vc4_plane_mode_set(struct drm
+@@ -834,7 +836,7 @@ static int vc4_plane_mode_set(struct drm
u32 tile_y = (src_y >> 4) & 1;
u32 subtile_y = (src_y >> 2) & 3;
u32 utile_y = src_y & 3;
@@ -159,7 +160,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
u32 y_off = src_y & tile_h_mask;
/* When Y reflection is requested we must set the
-@@ -929,7 +932,7 @@ static int vc4_plane_mode_set(struct drm
+@@ -930,7 +932,7 @@ static int vc4_plane_mode_set(struct drm
* of the 12-pixels in that 128-bit word is the
* first pixel to be used
*/
@@ -168,7 +169,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
u32 aligned = remaining_pixels / 12;
u32 last_bits = remaining_pixels % 12;
-@@ -951,12 +954,12 @@ static int vc4_plane_mode_set(struct drm
+@@ -952,12 +954,12 @@ static int vc4_plane_mode_set(struct drm
return -EINVAL;
}
pix_per_tile = tile_w / fb->format->cpp[0];
@@ -183,7 +184,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
vc4_state->offsets[i] += param * tile_w * tile;
vc4_state->offsets[i] += src_y /
-@@ -1017,10 +1020,8 @@ static int vc4_plane_mode_set(struct drm
+@@ -1018,10 +1020,8 @@ static int vc4_plane_mode_set(struct drm
vc4_dlist_write(vc4_state,
(mix_plane_alpha ? SCALER_POS2_ALPHA_MIX : 0) |
vc4_hvs4_get_alpha_blend_mode(state) |
@@ -196,7 +197,7 @@ Signed-off-by: Dom Cobley <popcornmix@gmail.com>
/* Position Word 3: Context. Written by the HVS. */
vc4_dlist_write(vc4_state, 0xc0c0c0c0);
-@@ -1078,10 +1079,8 @@ static int vc4_plane_mode_set(struct drm
+@@ -1079,10 +1079,8 @@ static int vc4_plane_mode_set(struct drm
/* Position Word 2: Source Image Size */
vc4_state->pos2_offset = vc4_state->dlist_count;
vc4_dlist_write(vc4_state,