aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/mt7620
Commit message (Collapse)AuthorAgeFilesLines
* ralink: bump to the target to v4.3John Crispin2015-12-101-14/+27
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47831 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Dovado tiny ACJohn Crispin2015-11-021-0/+17
| | | | | | | | | | | | | | | | Add support for Dovado tiny AC wifi router. Soc: mt7620a ram: 64MB flash: 8MB 1x usb 2.0 two gigabit lan ports 5ghz wlan is not supported on this board since there is no gpl driverfor mt7610e wifi chip. Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47348 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: mt7620 add icplus phy driver kernel config symbolJohn Crispin2015-11-021-0/+1
| | | | | | | | | Add missing icplus phy driver kernel config symbol to mt7620 subtarget. This is needed since some mt7620 devices have icplus ip1001 ethernet transceiver Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47346 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add alsa supportJohn Crispin2015-10-191-0/+2
| | | | | | | | | add the SDK alsa driver. this has only been tested on mt7628/88 and wm8960. mt7620 is only compile tested. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47205 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: enable mt76 by default for the mt7620 subtarget (for devices with ↵Felix Fietkau2015-10-062-3/+2
| | | | | | | | mt7620 + mt7612) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47146 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add build files for HiWiFi HC5x61 modelsJohn Crispin2015-10-051-0/+47
| | | | | | | | | | | | | | HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com <http://www.hiwifi.com/>. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them. The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval. v3 fix 1: Spaces -> Tabs 2: Removed some packages Signed-off-by: Xiaoning Kang <kangxn@163.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47113 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: disable the openwrt commandline hackJonas Gorski2015-08-301-1/+0
| | | | | | | | We don't make use of it, so no need to have it enabled. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46759 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix various mistakes in subtargets *.mk profilesJohn Crispin2015-08-174-15/+22
| | | | | | | | | | | | | | | | This patch: * fixes wrong indentation * fixes wrong names and descriptions (ex. Dlink -> D-Link) * changes filenames to manufacturer names * moves oem/unknown manufacturers boards to misc.mk profiles * combines profiles for boards from the same manufacturers in one file (ex. Olimex) * fix profile files structure (keep the same convention as in other targets, ex. ar71xx) in various .mk profiles, in ramips target. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46631 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Aigale Ai-BR100 dts and profile namesJohn Crispin2015-08-171-3/+3
| | | | | | | | The following patch changes dts filename and profile name for Aigale Ai-BR100 (for consistency). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46624 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Xiaomi MiWiFi Mini board, image and profile namesJohn Crispin2015-08-171-3/+3
| | | | | | | | | | | | | | The following patch: * changes board name from "xiaomi-miwifi-mini" to "miwifi-mini" * changes filenames of dts and profile * fixes LED names in dts file and base-files scripts * removes manufacturer name from image filename for Xiaomi MiWiFi Mini device. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46617 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: diable ill_acc driver by defaultJohn Crispin2015-05-271-0/+1
| | | | | | | | this treacled down via the stable tree and wandered into 3.18.14 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45793 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: disable INET_LRO by defaultJonas Gorski2015-04-281-1/+0
| | | | | | | | | | | | INET_LRO deprecated and there are exactly two drivers using it, neither being included in any of the targets enabling INET_LRO. At the same time both drivers needing it select it. So just disable it for everyone. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45584 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for Microduino MicroWRTJohn Crispin2015-04-091-0/+9
| | | | | | | | | | | | | | | | MicroWRT is an wireless router with 2 USB,1 ethernet port. It has a 16M flash and 64M DDR2 RAM. You can use most interface, such as i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to combine with the core board. The detailed information, please refer to https://www.microduino.cc/wiki/index.php?title=Main_Page This patch adds support for it. Because there is only one port,so disabled VLAN and use eth0 as lan port. and only a power LED control by power pin. Signed-off-by: 盛凯 <shengkai81@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45331 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: drop 3.14 supportJohn Crispin2015-03-161-180/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44811 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: move KERNFS to generic configJohn Crispin2015-03-061-1/+0
| | | | | | | | KERNFS symbol is selected by SYSFS, so place it in generic config. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44615 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLEDJohn Crispin2015-03-061-1/+0
| | | | | | | | | Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since only one platfrom (omap) needs them. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44614 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: move MTD_SPLIT_SUPPORT to generic configJohn Crispin2015-03-061-1/+0
| | | | | | | | | | | CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform specific configs explicitly enables it, while no one platform disables this symbol. So place it in generic config and remove from platform specific configs. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44612 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: remove GENERIC_NET_UTILS from platform configsJohn Crispin2015-03-061-1/+0
| | | | | | | | | | CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled in generic config, so we don't need this symbol in platform specific configurations. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44611 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: move CONFIG_MIPS_O32_FP64_SUPPORT to generic configsJonas Gorski2015-03-012-2/+0
| | | | | | | | | Most MIPS targets have it disabled, so move the symbol to the generic configs to keep target configs small. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44583 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix the config filesJohn Crispin2015-02-142-0/+184
| | | | | | | | oops, accidently moved instead of copied them Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44454 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips/mt7620: add missing config symbolNicolas Thill2015-02-111-0/+1
| | | | | | Signed-off-by: Nicolas Thill <nico@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44399 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add 3.18 supportJohn Crispin2015-02-091-10/+16
| | | | | | | | keep default as 3.14, mt7621 gic need to be ported to 3.18 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44349 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Xiaomi MiWiFi Mini devicesJohn Crispin2015-02-021-0/+18
| | | | | | | | | This patch adds support for Xiaomi MiWiFi Mini, a 802.11a/b/g/n/ac dual radio wireless router based on the MediaTek MT7620a SoC. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44238 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add preliminary Archer C20i supportFelix Fietkau2015-01-091-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43898 3c298f89-4303-0410-b956-a3cf2f4a3e73
* all targets: remove all =m kernel config symbolsFelix Fietkau2015-01-051-4/+0
| | | | | | | | | | | | modules build during the kernel compile phase are ignored anyway, all modules should be built using KernelPackage in package/kernel/linux/modules/* selecting the appropriate config symbols there rather than in target/linux/*/config-* Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43842 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use CONFIG_MTD_SPLIT_UIMAGE_FW instead of CONFIG_MTD_UIMAGE_SPLITFelix Fietkau2015-01-021-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43813 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: split mt7621 spi into a separate driver, increase maximum transfer sizeFelix Fietkau2015-01-021-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43807 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips:Add support for Aigale Ai-BR100John Crispin2014-12-131-0/+16
| | | | | | | | | Aigale Ai-BR100 is a router with mt7620a soc. There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led. Signed-off-by: 郭传鈜 <gch981213@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43681 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: merge the mt7620a/n subtargetsJohn Crispin2014-11-195-0/+250
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43300 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 03:28:13 +0000