Added board OLIMEX_STM32_103STK.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@3289 35acf78f-673a-0410-8e92-d51de3d6d3f4

3 files changed, 221 insertions, 0 deletions

diff --git a/boards/OLIMEX_STM32_103STK/board.c b/boards/OLIMEX_STM32_103STK/board.c
new file mode 100644
index 000000000..b8b98c05f
--- /dev/null
+++ b/boards/OLIMEX_STM32_103STK/board.c
@@ -0,0 +1,54 @@
+/*

+    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,

+                 2011 Giovanni Di Sirio.

+

+    This file is part of ChibiOS/RT.

+

+    ChibiOS/RT is free software; you can redistribute it and/or modify

+    it under the terms of the GNU General Public License as published by

+    the Free Software Foundation; either version 3 of the License, or

+    (at your option) any later version.

+

+    ChibiOS/RT is distributed in the hope that it will be useful,

+    but WITHOUT ANY WARRANTY; without even the implied warranty of

+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+    GNU General Public License for more details.

+

+    You should have received a copy of the GNU General Public License

+    along with this program.  If not, see <http://www.gnu.org/licenses/>.

+*/

+

+#include "ch.h"

+#include "hal.h"

+

+/**

+ * @brief   PAL setup.

+ * @details Digital I/O ports static configuration as defined in @p board.h.

+ *          This variable is used by the HAL when initializing the PAL driver.

+ */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

+const PALConfig pal_default_config =

+{

+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},

+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},

+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},

+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},

+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},

+};

+#endif

+

+/*

+ * Early initialization code.

+ * This initialization must be performed just after stack setup and before

+ * any other initialization.

+ */

+void __early_init(void) {

+

+  stm32_clock_init();

+}

+

+/*

+ * Board-specific initialization code.

+ */

+void boardInit(void) {

+}

diff --git a/boards/OLIMEX_STM32_103STK/board.h b/boards/OLIMEX_STM32_103STK/board.h
new file mode 100644
index 000000000..a53695906
--- /dev/null
+++ b/boards/OLIMEX_STM32_103STK/board.h
@@ -0,0 +1,162 @@
+/*

+    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,

+                 2011 Giovanni Di Sirio.

+

+    This file is part of ChibiOS/RT.

+

+    ChibiOS/RT is free software; you can redistribute it and/or modify

+    it under the terms of the GNU General Public License as published by

+    the Free Software Foundation; either version 3 of the License, or

+    (at your option) any later version.

+

+    ChibiOS/RT is distributed in the hope that it will be useful,

+    but WITHOUT ANY WARRANTY; without even the implied warranty of

+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+    GNU General Public License for more details.

+

+    You should have received a copy of the GNU General Public License

+    along with this program.  If not, see <http://www.gnu.org/licenses/>.

+*/

+

+#ifndef _BOARD_H_

+#define _BOARD_H_

+

+/*

+ * Setup for the Olimex STM33-P103 proto board.

+ */

+

+/*

+ * Board identifier.

+ */

+#define BOARD_OLIMEX_STM32_103STK

+#define BOARD_NAME              "Olimex STM32-103STK"

+

+/*

+ * Board frequencies.

+ */

+#define STM32_LSECLK            32768

+#define STM32_HSECLK            8000000

+

+/*

+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.

+ */

+#define STM32F10X_MD

+

+/*

+ * IO pins assignments.

+ */

+#define GPIOA_BUTTON_WAKEUP     0

+#define GPIOC_BUTTON_TAMPER     13

+#define GPIOC_JOY               5

+#define GPIOC_JOY_CENTER_BUT    6

+

+#define GPIOA_SPI1NSS           4

+#define GPIOB_SPI2NSS           12

+

+#define GPIOC_MMCWP             2

+#define GPIOC_MMCCP             1

+

+#define GPIOC_USB_P             4

+#define GPIOC_LCD_RES           7

+#define GPIOC_NRF_CE            8

+#define GPIOC_NRF_IRQ           9

+#define GPIOC_LCD_E             10

+

+#define GPIOC_USB_DISC          11

+#define GPIOC_LED               12

+

+#define GPIOB_ACCEL_IRQ         5

+

+/*

+ * I/O ports initial setup, this configuration is established soon after reset

+ * in the initialization code.

+ *

+ * The digits have the following meaning:

+ *   0 - Analog input.

+ *   1 - Push Pull output 10MHz.

+ *   2 - Push Pull output 2MHz.

+ *   3 - Push Pull output 50MHz.

+ *   4 - Digital input.

+ *   5 - Open Drain output 10MHz.

+ *   6 - Open Drain output 2MHz.

+ *   7 - Open Drain output 50MHz.

+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.

+ *   9 - Alternate Push Pull output 10MHz.

+ *   A - Alternate Push Pull output 2MHz.

+ *   B - Alternate Push Pull output 50MHz.

+ *   C - Reserved.

+ *   D - Alternate Open Drain output 10MHz.

+ *   E - Alternate Open Drain output 2MHz.

+ *   F - Alternate Open Drain output 50MHz.

+ * Please refer to the STM32 Reference Manual for details.

+ */

+

+/*

+ * Port A setup.

+ * Everything input with pull-up except:

+ * PA0  - Normal input      (BUTTON).

+ * PA2  - Alternate output  (USART2 TX).

+ * PA3  - Normal input      (USART2 RX).

+ */

+#define VAL_GPIOACRL            0x88884B84      /*  PA7...PA0 */

+#define VAL_GPIOACRH            0x88888888      /* PA15...PA8 */

+#define VAL_GPIOAODR            0xFFFFFFFF

+

+/*

+ * Port B setup.

+ * Everything input with pull-up except:

+ * PB6,7   - Alternate open drain (I2C1).

+ * PB10,11 - Alternate open drain (I2C2).

+ * PB12    - Push Pull output  (MMC SPI2 NSS).

+ * PB13    - Alternate output  (MMC SPI2 SCK).

+ * PB14    - Normal input      (MMC SPI2 MISO).

+ * PB15    - Alternate output  (MMC SPI2 MOSI).

+ */

+#define VAL_GPIOBCRL            0xEE888888      /*  PB7...PB0 */

+#define VAL_GPIOBCRH            0xB4B3EE88      /* PB15...PB8 */

+#define VAL_GPIOBODR            0xFFFFFFFF

+

+/*

+ * Port C setup.

+ * Everything input with pull-up except:

+ * PC4  - Normal input because there is an external resistor.

+ * PC5  - Analog input (joystick).

+ * PC6  - Normal input because there is an external resistor.

+ * PC7  - Normal input because there is an external resistor.

+ * PC10 - Push Pull output (CAN CNTRL).

+ * PC11 - Push Pull output (USB DISC).

+ * PC12 - Open Drain output (LED).

+ */

+#define VAL_GPIOCCRL            0x44048888      /*  PC7...PC0 */

+#define VAL_GPIOCCRH            0x88863388      /* PC15...PC8 */

+#define VAL_GPIOCODR            0xFFFFFFFF

+

+/*

+ * Port D setup.

+ * Everything input with pull-up except:

+ * PD0  - Normal input (XTAL).

+ * PD1  - Normal input (XTAL).

+ */

+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */

+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */

+#define VAL_GPIODODR            0xFFFFFFFF

+

+/*

+ * Port E setup.

+ * Everything input with pull-up except:

+ */

+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */

+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */

+#define VAL_GPIOEODR            0xFFFFFFFF

+

+#if !defined(_FROM_ASM_)

+#ifdef __cplusplus

+extern "C" {

+#endif

+  void boardInit(void);

+#ifdef __cplusplus

+}

+#endif

+#endif /* _FROM_ASM_ */

+

+#endif /* _BOARD_H_ */

diff --git a/boards/OLIMEX_STM32_103STK/board.mk b/boards/OLIMEX_STM32_103STK/board.mk
new file mode 100644
index 000000000..383e1c490
--- /dev/null
+++ b/boards/OLIMEX_STM32_103STK/board.mk
@@ -0,0 +1,5 @@
+# List of all the board related files.

+BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_103STK/board.c

+

+# Required include directories

+BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_103STK