aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
...
* rockchip: refresh kernel 5.15 configTomas Lara2022-10-021-10/+13
| | | | | | Refreshed using make kernel oldconfig CONFIG TARGET=rockchip . Signed-off-by: Tomas Lara <tl849670@gmail.com>
* ipq40xx: disable boards not converted to DSADavid Bauer2022-10-023-43/+86
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq40xx: remove non-converted network configsRobert Marko2022-10-021-96/+0
| | | | | | | Remove networking configs for non DSA converted boards in ipq40xx. Currently, they are just causing clutter. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: ipqess: enable threaded NAPIRobert Marko2022-10-021-2/+4
| | | | | | | | Enable threaded NAPI by default in IPQESS driver as it significantly improves network perfromance, in my testing about 100+ Mbps in WAN-LAN routing. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: Meraki MR33: convert MAC addresses to nvmemLech Perczak2022-10-023-9/+19
| | | | | | | | This fixes assigning random MAC to br-lan interface upon boot. While at that, rename at24@50 node to eeprom@50, to align with upstream device tree style. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ipq40xx: convert some boards to DSARobert Marko2022-10-0232-99/+754
| | | | | | | | | | | | Convert IPQ40xx boards to DSA setup. Signed-off-by: Leon M. George <leon@georgemail.eu> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org> Signed-off-by: ChunAm See <z1250747241@gmail.com> Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Signed-off-by: Andrew Sim <andrewsimz@gmail.com> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: qca8k: introduce proper PSGMII calibrationSerhii Serhieiev2022-10-022-12/+331
| | | | | | | | | | | | Serhii and others have experienced PSGMII link degradation up to point that it actually does not pass packets at all or packets arrive as zeros. This usually happened after a couple of hot reboots. Serhii has managed to track it down to PSGMII calibration not being done properly and has fixed it, so all of the code is Serhii-s work. Signed-off-by: Serhii Serhieiev <adron@mstnt.com> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: qca807x: drop kernel version checksRobert Marko2022-10-021-16/+0
| | | | | | | Since kernel 5.4 has been droppped from IPQ40xx, there is no need to keep the version checks for kernels older than 5.10. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: qca807x: add suspend and resume opsSerhii Serhieiev2022-10-021-0/+4
| | | | | | | | | | Currently, suspend and resume ops are not present, this means that if user disables a DSA interface that the PHY-s remain alive and the link is up. Fix it by using generic PHY suspend and resume ops. Signed-off-by: Serhii Serhieiev <adron@mstnt.com> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: sxtsq-5-ac: correct TCSR ESS typeRobert Marko2022-10-021-1/+1
| | | | | | | SXTsq 5 ac uses RGMII on the port 5 and not PSGMII, so correct the TCSR interface type property. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: enable ethernet and DSA driver comboRobert Marko2022-10-022-0/+16
| | | | | | | | Select the Ethernet driver, DSA tag driver and the DSA driver itself to be built in the kernel config. They automatically pull in switchdev and phylink. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: add DSA switch driverRobert Marko2022-10-0212-1190/+678
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in. It shares most of the stuff with its external counterpart, however it is modified for the SoC. Namely, it doesn't have second CPU port (Port 6), so it has 6 ports instead of 7. It also has no built-in PHY-s but rather requires external PSGMII based companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry out calibration before using them. PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which unfortunately requires some magic values as the datasheet doesnt document the bits that are being set or the register at all. Since its built-in it is MMIO like other peripherals and doesn't have its own MDIO bus but depends on the SoC provided one. CPU connection is at Port 0 and it uses some kind of a internal connection and no traditional RGMII/SGMII. It also doesn't use in-band tagging like other qca8k switches so a shinfo based tagger is used. This is based on the current OpenWrt qca8k version that has been imported from generic target. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: import qca8k from genericRobert Marko2022-10-022-0/+2500
| | | | | | | | This is just importing the qca8k driver from the generic target. It will be used as the based for IPQ40xx version, this is just to be able to see the diff. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: add PSGMII PHY mode defineRobert Marko2022-10-022-0/+122
| | | | | | | | | | | PSGMII is a Qualcomm specific mode similar to QSGMII but it has 5 SGMII lines instead of 4 in QSGMII. This just adds the support for the PHY layer to be able to identify the mode for further use. It is required for the DSA driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: add IPQESS ethernet driverRobert Marko2022-10-029-1/+2296
| | | | | | | | | IPQESS is the EDMA replacement driver for the IPQ40xx SoC built-in ethernet controller. Unlike EDMA it is Phylink based and doesnt touch PHY-s directly. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: qca807x: always set PSGMII AZ WARRobert Marko2022-10-023-12/+7
| | | | | | | | | | | | There is no point in using a DT property to trigger setting the PSGMII PHY AZ transmitting ability. Especially since EEE can be disabled using ethtool anyway. Fixup the mask for setting the workaround as only BIT(0) is actually being changed and use the phy_clear_bits_mmd helper instead of reading, then clearing the bit and writing back as it does everything for us. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: add shinfo based DSA tag driverRobert Marko2022-10-024-0/+461
| | | | | | | | | | | | IPQ40xx requires a special DSA tag driver despite using the QCA8337N switch. However they have changed the header format and the existing QCA tag driver cannot be reused. For details on how it actually works and else read the patch commit description. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: disable nodes instead of deleting themRobert Marko2022-10-025-26/+88
| | | | | | | There is no reason to delete the DT PHY nodes as you can just disable them. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: qca807x: add SFP improvementsRobert Marko2022-10-021-66/+74
| | | | | | | | | | | | | | | | | | | Currently, QCA807x doesnt do any kind of validation to see whether it actually supports the inserted module. So lets add checks to allow only 1000BaseX and 100BaseFX based modules. While adding validation, move fiber configuration to insert/remove events instead of always doing it at config time. This allows getting rid of the DT property for fiber enable and now only the upstream sfp phandle is required. Since we are refactoring fiber related code, lets heavily simplify the status polling as the current logic is overcomplicated due to previous wish to support non standard SFP cages that dont have pins properly connected, that is removed now and only proper SFP cages will work. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: drop ESSEDMA + AR40xx DTS nodesRobert Marko2022-10-0259-1096/+0
| | | | | | | In order to start working on IPQESS + DSA drop the old ESSEDMA + AR40xx DTS nodes. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: drop ESSEDMA + AR40xxRobert Marko2022-10-0221-7480/+1
| | | | | | | | | | In order to start working on IPQESS + DSA drop the old ESSEDMA + AR40xx driver combo. Remove the kernel symbols, disable swconfig and drop swconfig package as they are not needed anymore. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* lantiq: enable interrupts on second VPEsAleksander Jan Bajkowski2022-10-021-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is needed to handle interrupts by the second VPE on the Lantiq ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to the second VPE results in a hang. Currently, the vsmp_init_secondary() function is responsible for enabling these interrupts. It only enables Malta-specific interrupts (SW0, SW1, HW4 and HW5). The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware interrupts are wired to an ICU instance. Each VPE has an independent instance of the ICU. The mapping of the ICU interrupts is shown below: SW0(IP0) - IPI call, SW1(IP1) - IPI resched, HW0(IP2) - ICU 0-31, HW1(IP3) - ICU 32-63, HW2(IP4) - ICU 64-95, HW3(IP5) - ICU 96-127, HW4(IP6) - ICU 128-159, HW5(IP7) - timer. This patch enables all interrupt lines on the second VPE. This problem affects multithreaded SoCs with a custom interrupt controller. SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the future, this may be replaced with some generic solution. Tested on Lantiq xRX200. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* ramips: add support for SNR SNR-CPE-ME2-LiteAlexey Kosmakov2022-10-022-0/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SNR SNR-CPE-ME2-Lite is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4 GHz 2T2R (MediaTek MT7603E) 5 GHz 2T2R (MediaTek MT7613BE) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX - 57600n8 - Power : 12 VDC, 1.5 A Flash instruction via WEB (firmware 1.10.4 and later) 1. Boot SNR-CPE-ME2-Lite normally with "Router" mode 2. Access to "http://192.168.1.1/" and open "Administration -> Management" page 3. Select the OpenWrt factory image in "Firmware update" section and click "Update" button 4. Wait ~120 seconds to complete flashing Flash instruction via TFTP (all version): 1. Boot SNR-CPE-ME2-Lite to recovery mode (hold the reset button while power on) 2. Send firmware via TFTP client: TFTP Server address: 192.168.1.1 TFTP Client address: 192.168.1.131 3. Wait ~120 seconds to complete flashing Signed-off-by: Alexey Kosmakov <a.kosmakov@nagtech.ru>
* ramips: enable LZMA loader to fix Linksys RE6500 bootMark King2022-10-021-0/+1
| | | | | | | | | | | At some point after 21.02.3 and before 22.03.0, the size limits of the Linksys RE6500 were reached and prevent booting from the 22.03.0 release or builds of current SNAPSHOT. This patch allows builds of master to boot again and has been tested on my device. Fixes: #8577 Signed-off-by: Mark King <mark@vemek.co>
* kernel: bump 5.10 to 5.10.146John Audia2022-10-028-20/+20
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.145John Audia2022-10-027-49/+12
| | | | | | | | | | | | | | Manually rebased: hack-5.10/780-usb-net-MeigLink_modem_support.patch Removed upstreamed: patches-5.10/110-gpio-mpc8xxx-Fix-support-for-IRQ_TYPE_LEVEL_LOW-flow.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.145&id=24196210b198e8e39296e277bb93b362aa207775 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.71John Audia2022-10-029-75/+21
| | | | | | | | | | | | | | | | | Removed upstreamed: uml/patches-5.15/001-um-fix-default-console-kernel-parameter.patch[1] All other patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.71&id=e1dbe8a62098b20f5093cf75ade2f2dc9259b006 Signed-off-by: John Audia <therealgraysky@proton.me> Compile-tested: mvebu/cortexa72 (RB5009UG+S+IN) Run-tested: mvebu/cortexa72 (RB5009UG+S+IN)
* kernel: bump 5.15 to 5.15.70John Audia2022-10-023-40/+3
| | | | | | | | | | | | | | | | | | Manually rebased: hack-5.15/780-usb-net-MeigLink_modem_support.patch Removed upstreamed: patches-5.15/110-gpio-mpc8xxx-Fix-support-for-IRQ_TYPE_LEVEL_LOW-flow.patch[1] All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.70&id=89cfddd416bac41ff35f37f928ed3d7fefef908e Signed-off-by: John Audia <therealgraysky@proton.me>
* ath79: fix LibreRouter-v1 watchdog and poe_passSantiago Piccinini2022-10-021-0/+4
| | | | | | Watchdog and poe_passthrough gpios require the jtag disabled. Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net>
* realtek: use correct CAUSEF_DC macro in prom.cSander Vanheule2022-10-011-1/+1
| | | | | | | | The workaround for an already-enabled R4K timer used a non-existent macro CAUSE_DC. Fix compiling by using the actual macro CAUSEF_DC. Fixes: b7aab1958591 ("realtek: SMP handling of R4K timer interrupts") Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: SMP handling of R4K timer interruptsMarkus Stockhausen2022-10-011-3/+9
| | | | | | | | | | | | | | | | | | | Until now there has been no good explanation why we mess with the R4K timer on SMP. After extensive testing and looking at the SDK code it becomes clear what it is all about. When we disable the CEVT_R4K module (we will do with the new timer driver) the R4K timer hardware still fires interrupts on the secondary CPU. To get around this we have two options: - Disable IRQ 7 - Stop the counter completely This patch selects option two because this is the root of evil.. To be on the safe side we will do it only in case the CEVT_R4K module is disabled. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
* realtek: fix SMP startupMarkus Stockhausen2022-10-011-2/+1
| | | | | | | | The scope of the SMP startup structure is wrong. It is created on the stack and not as a global variable. This can lead to startup failures. Fixes: 3f41360eb70c ("realtek: use upstream recommendation for CPU start") Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de
* realtek: Convert incorrect v5.10 patchesOlliver Schinagl2022-10-0127-1/+470
| | | | | | | | | | | | | | | | | OpenWRT's developer guide prefers having actual patches so they an be sent upstream more easily. However, in this case, Adding proper fields also allows for `git am` to properly function. Some of these patches are quite old, and lack much traceable history. This commit tries to rectify that, by digging in the history to find where and how it was first added. It is by no means perfect and also shows some patches that should have been long gone. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* ath79: Convert incorrect 5.10 and 5.15 patchesOlliver Schinagl2022-10-0133-19/+549
| | | | | | | | | | | | | | | | | OpenWRT's developer guide prefers having actual patches so they an be sent upstream more easily. However, in this case, Adding proper fields also allows for `git am` to properly function. Some of these patches are quite old, and lack much traceable history. This commit tries to rectify that, by digging in the history to find where and how it was first added. It is by no means perfect and also shows some patches that should have been long gone. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* generic: Convert incorrect generic/5.10 patchesOlliver Schinagl2022-10-0130-163/+508
| | | | | | | | | | | | | | | | | OpenWRT's developer guide prefers having actual patches so they an be sent upstream more easily. However, in this case, Adding proper fields also allows for `git am` to properly function. Some of these patches are quite old, and lack much traceable history. This commit tries to rectify that, by digging in the history to find where and how it was first added. It is by no means perfect and also shows some patches that should have been long gone. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* ramips: add led driver to UniFi FlexHD defaut package setDaniel Golle2022-09-301-1/+1
| | | | | | | Add kmod-leds-ubnt-ledbar to the packages selected by default on the UniFi FlexHD access point. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support t-phy settings from efuse on MT7986Daniel Golle2022-09-303-1/+405
| | | | | | | Import patches from mtk-openwrt-feeds (MTK SDK) to support reading t-phy settings affecting PCIe as well as USB2 and USB3 from efuse. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: add efuse layout to mt7986a.dtsiDaniel Golle2022-09-301-0/+93
| | | | | | | | efuse is used to store board-specific settings of some of the in-SoC peripherals. Add it to device tree, so it gets probed on boot and can be accessed by other drivers. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add patch allowing 1-byte wide access to efuseDaniel Golle2022-09-301-0/+46
| | | | | | | Allow byte-wise access to mtk-efuse as some drivers require that. Patch imported from mtk-openwrt-feeds (MTK SDK). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: fold lzma debloat patch into the patch adding the codeFelix Fietkau2022-09-304-3374/+96
| | | | | | Reduces the number of hack patches Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move kernel image cmdline hack to the octeon targetFelix Fietkau2022-09-306-17/+0
| | | | | | It is the only remaining user of this hack Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove hack patch, move kirkwood specific kmods to target modules.mkFelix Fietkau2022-09-303-46/+30
| | | | | | | Tweaking the KCONFIG line of kmod-ata-marvell-sata makes the hack patch unnecessary Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move ubnt ledbar driver to a separate packageFelix Fietkau2022-09-3011-342/+10
| | | | | | | Simplifies the tree by removing a non-upstream kernel patch and related kconfig symbols Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove udp tunnel kconfig selection hackFelix Fietkau2022-09-302-31/+0
| | | | | | | | The corresponding kmod package is marked as HIDDEN and selected by all other kernel modules that need it, so the kconfig side will be in sync without manual selection Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: backport clk driver fix for DT nodes namesRafał Miłecki2022-09-294-124/+144
| | | | | | It allows dropping downstream patch renaming DT nodes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* build: fix warnings from grepChris Osgood2022-09-281-1/+1
| | | | | | | Fixes build warnings when using newer versions of grep. Signed-off-by: Chris Osgood <chris_github@functionalfuture.com> Tested-by: Georgi Valkov <gvalkov@gmail.com>
* ramips: update MAC address configuration for Buffalo WSR-1166DHPKazuhiro Ito2022-09-281-2/+2
| | | | | | | | | | | | Convert MAC address and label_mac configuration of Buffalo WSR-1166DHP to use the generic function of OpenWrt. Apply commit 770cfe9 for WCR-1166DS to WSR-1166DHP too. Tested on the device and MAC address is kept before and after this change. Signed-off-by: Kazuhiro Ito <kzhr@d1.dion.ne.jp>
* kernel: mtk_ppe: use MTK_FOE_STATE_INVALID instead of *_UNBINDDaniel Golle2022-09-288-0/+78
| | | | | | | | | | Instead of dropping *fix-typo-in-__mtk_foe_entry.patch which effectively means keeping the (also wrong) assignment of MTK_FOE_STATE_BIND, rather use MTK_FOE_STATE_INVALID as that works well on both older (NETSYS_V1) and newer (NETSYS_V2) MediaTek SoCs. Suggested-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* realtek: rtl931x: fix missing CONFIG_COMMON_CLK_REALTEK config flagChristian Marangi2022-09-281-0/+1
| | | | | | | | | When the realtek clock driver was introduced, CONFIG_COMMON_CLK_REALTEK was not correctly disabled for other subtarget. Add the missing config flag to fix compilation error on buildbot. Fixes: 4850bd887c3a ("realtek: add RTL83XX clock driver") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: rename upstreamed patches and import fixesDaniel Golle2022-09-2716-42/+155
| | | | | | | | | | | | Move and rename patches which were merged upstream and import follow-up fixes for MediaTek Ethernet offloading features on MT7622 and Filogic platforms. Remove patch 793-net-ethernet-mtk_eth_soc-fix-typo-in-__mtk_foe_entry.patch which breaks hardware flow offloading on MT7622, it will be reverted upstream as well. Fixes: c93c5365c0 ("kernel: pick patches for MediaTek Ethernet from linux-next") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-23 13:45:06 +0000