aboutsummaryrefslogtreecommitdiffstats
path: root/scripts
Commit message (Collapse)AuthorAgeFilesLines
* include/image*: add support for device-tree overlaysDaniel Golle2021-03-171-0/+1
| | | | | | | | | | | Add new target feature 'dt-overlay' which makes DTC keep the symbol names in the generated dtb. Make sure additional DT overlay sources specified by the new device variable DEVICE_DTS_OVERLAY get compiled together with the main DTS (currently overlays got to be in the same folder). Let Build/fit pass the generated DT overlay blobs to mkits.sh. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts/mkits.sh: add support for adding DT overlay blobs to imageDaniel Golle2021-03-171-2/+56
| | | | | | | | | | | | Allow adding multiple device tree overlay blobs to an image and generate configurations for each of them. This is useful on boards with modern U-Boot which allow e.g. user- configurable peripherals ("shields") in that way. Note that currently, each generated configuration adds exactly one overlay on top of the base image, ie. adding multiple overlays at the same time is not yet supported. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts,ipkg-build: use realpath for pkg_dirPaul Spooren2021-03-141-1/+1
| | | | | | | This allows manual execution of the ipkg-build script even with releative path. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts,ipkg-build: apply shellcheckPaul Spooren2021-03-141-41/+40
| | | | | | | | | | | This commit cleans the `ipkg-build` script via changes suggested by shellcheck. These are mostly word splitting issues. Remove the definition of GZIP, this adds three "lookups" of the `gzip` binary but the rest of the build system doesn't seem to use such improvements neither. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: mkits.sh: replace @ with - in nodesRobert Marko2021-03-051-8/+8
| | | | | | | | | | | | | | | U-boot will reject the nodes with @ for the address since commit: https://gitlab.denx.de/u-boot/u-boot/-/commit/79af75f7776fc20b0d7eb6afe1e27c00fdb4b9b4 This in turn will cause the failure to boot with OpenWrt generated images. So, to rectify that simply replace @ with -. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cover also newly added rootfs@1 and initrd@1 nodes) Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* treewide: fix spelling 'seperate' -> 'separate'Daniel Golle2021-02-281-1/+1
| | | | | | | This popular spelling mistake was also introduced by myself lately. Fix it everywhere. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* download: add mirror alias for DebianDavid Bauer2021-02-261-0/+4
| | | | | | | Add an alias for Debian packages and download them from the Debian mirror redirector. Signed-off-by: David Bauer <mail@david-bauer.net>
* download: use mirror redirector for GNOME downloadsDavid Bauer2021-02-261-0/+1
| | | | | | | Use the GNOME mirror redirector as the primary download source for GNOME packages. Signed-off-by: David Bauer <mail@david-bauer.net>
* treewide: rename IMAGE_PREFIX/IMAGE_NAME to DEVICE_IMG_*Adrian Schmutzler2021-02-251-3/+3
| | | | | | | | | | | | | | We so far had two variables IMG_PREFIX and IMAGE_PREFIX with different content. Since these names are obviously quite confusing, this patch renames the latter to DEVICE_IMG_PREFIX, as it's a device-dependent variable, while IMG_PREFIX is only (sub)target-dependent. For consistency, also rename IMAGE_NAME to DEVICE_IMG_NAME, as that's a device-dependent variable as well. Cc: Paul Spooren <mail@aparcar.org> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* image: allow building FIT and uImage with ramdiskDaniel Golle2021-02-242-1/+28
| | | | | | | | | | | | | Instead of embedding the initrd cpio archive into the kernel, allow for having an external ramdisk added to the FIT or uImage. This is useful to overcome kernel size limitations present in many stock bootloaders, as the ramdisk is then loaded seperately and doesn't add to the kernel size. Hence we can have larger ramdisks to host ie. installers with all binaries to flash included (or a web-based firmware selector). In terms of performance and total size the differences are neglectible. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* image: add support for building FIT image with filesystemDaniel Golle2021-02-241-4/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow for single (external-data) FIT image to hold kernel, dtb and squashfs. In that way, the bootloader verifies the system integrity including the rootfs, because what's the point of checking that the hash of the kernel is correct if it won't boot in case of squashfs being corrupted? Better allow bootloader to check everything needed to make it at least up to failsafe mode. As a positive side effect this change also makes the sysupgrade process on nand potentially much easier as it is now. In short: mkimage has a parameter '-E' which allows generating FIT images with 'external' data rather than embedding the data into the device-tree blob itself. In this way, the FIT structure itself remains small and can be parsed easily (rather than having to page around megabytes of image content). This patch makes use of that and adds support for adding sub-images of type 'filesystem' which are used to store the squashfs. Now U-Boot can verify the whole OS and the new partition parsers added in the Linux kernel can detect the filesystem sub-images, create partitions for them, and select the active rootfs volume based on the configuration in FIT (passing configuration via device tree could be implemented easily at a later stage). This new FIT partition parser works for NOR flash (on top of mtdblock), NAND flash (on top of ubiblock) as well as classic block devices (ie. eMMC, SDcard, SATA, NVME, ...). It could even be used to mount such FIT images via `losetup -P` on a user PC if this patch gets included in Linux upstream one day ;) Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* download: remove broken mirrorsDavid Bauer2021-02-221-2/+0
| | | | | | These mirrors don't exist anymore. Remove them. Signed-off-by: David Bauer <mail@david-bauer.net>
* Mostly revert "build: add support for fixing up library soname"Felix Fietkau2021-02-151-73/+0
| | | | | | | | | This reverts commit b12288fa69b171f7c9405518c9bed3581a06f7ce. The patchelf approach is too fragile, and the only users of this have been converted to make patching unnecessary Leave the abi_version_str variable in place in rules.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: drop ABI version from metadataFelix Fietkau2021-02-142-16/+0
| | | | | | | Preparation for supporting dynamic ABI versions that depend on the runtime configuration. Read the suffix from the staging dir pkginfo version files. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add support for fixing up library sonameFelix Fietkau2021-02-141-0/+73
| | | | | | | | | | This makes it possible to declare a package ABI_VERSION independent from the upstream soname by setting PKG_ABI_VERSION in the package makefile. The library filename is fixed up for files installed to packages and to the staging dir. References to the original from executables within the same package are also fixed up Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts: fix checkpatch.pl for changed license dirPaul Spooren2021-02-141-1/+1
| | | | | | | As multiple LICENSES are shipped and no longer just LICENSE, modify the OpenWrt tree detection in checkpatch.pl. Signed-off-by: Paul Spooren <mail@aparcar.org>
* treewide: unify OpenWrt hosted source via @OPENWRTPaul Spooren2021-02-051-0/+2
| | | | | | | | | | | Multiple sources are hosted on OpenWrts source server only. The source URLs to point to the server vary based on different epochs in OpenWrts history. Replace all by @OPENWRT which is an "empty" mirror, therefore using the fallback servers sources.cdn.openwrt.org and sources.openwrt.org. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: sources CDN as fallback in download.plPaul Spooren2021-01-271-1/+1
| | | | | | | | | In case the default sources for a package fail use the CDN rather than our own mirror. In case the CDN fails, fallback to our mirror. Also remove mirror1 which isn't available anymore. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: target-metadata don't add PROFILES twicePaul Spooren2021-01-141-1/+2
| | | | | | | | | | | | | | | Since 4ee3cf2b5a profiles with alternative vendor names may appear multiple times in `tmp/.targetinfo` or `.targetinfo` (for ImageBuilders). The `target-metadata.pl` script adds these profiles then twice to `PROFILE_NAMES` and the ImageBuilder show the profile twice when running `make info`. This patch removes duplicate profile IDs and only adds them once to `.profiles.mk`. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts/feed: no warn on toolchain/linux overwritePaul Spooren2021-01-061-1/+3
| | | | | | | | | | | The recent 7f285d "scripts/feeds: warn when skipping core package override" floods SDK output with warning of overwriting "linux" and "toolchain" core packages. This should be ignored as these are not regular packages added via feeds. While at it slightly improve the warning string. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: drop clang wrapperKevin Darbyshire-Bryant2021-01-051-12/+0
| | | | | | | clang's gcc emulation does the right thing with -print-file-name now, drop the wrapper Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* scripts/qemustart: use squashfs instead of ext4Paul Spooren2021-01-011-1/+1
| | | | | | | | | The qemustart script currently picks the ext4 filesystem rather than squashfs, while the latter is default for nearly all OpenWrt targets. Change the default behaviour of qemustart to be in line with the rest. Signed-off-by: Paul Spooren <mail@aparcar.org>
* ipq40xx: add support for Plasma Cloud PA2200Marek Lindner2020-12-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: * QCA IPQ4019 * 256 MB of RAM * 32 MB of SPI NOR flash (w25q256) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=PlasmaCloud-PA2200 * 2T2R 5 GHz (channel 36-64) - QCA9888 hw2.0 (PCI) - requires special BDF in QCA9888/hw2.0/board-2.bin bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA2200 * 2T2R 5 GHz (channel 100-165) - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=PlasmaCloud-PA2200 * GPIO-LEDs for 2.4GHz, 5GHz-SoC and 5GHz-PCIE * GPIO-LEDs for power (orange) and status (blue) * 1x GPIO-button (reset) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio3: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + used as LAN interface - phy@mdio4: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 802.3at POE+ + used as WAN interface * 12V 2A DC Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai> [sven@narfation.org: prepare commit message, rebase, use all LEDs, switch to dualboot_datachk upgrade script, use eth1 as designated WAN interface] Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ipq40xx: add support for Plasma Cloud PA1200Marek Lindner2020-12-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: * QCA IPQ4018 * 256 MB of RAM * 32 MB of SPI NOR flash (w25q256) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200 * 2T2R 5 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200 * 3x GPIO-LEDs for status (cyan, purple, yellow) * 1x GPIO-button (reset) * 1x USB (xHCI) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio4: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + used as LAN interface - phy@mdio3: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 802.3af/at POE(+) + used as WAN interface * 12V/24V 1A DC Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai> [sven@narfation.org: prepare commit message, rebase, use all LEDs, switch to dualboot_datachk upgrade script, use eth1 as designated WAN interface] Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ath79: Add support for Plasma Cloud PA300Sven Eckelmann2020-12-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: * Qualcomm/Atheros QCA9533 v2 * 650/600/217 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash (mx25l12805d) - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 2T2R 2.4 GHz Wi-Fi * multi-color LED (controlled via red/green/blue GPIOs) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + Label: Ethernet 1 + 24V passive POE (mode B) + used as WAN interface - eth1 + Label: Ethernet 2 + 802.3af POE + builtin switch port 2 + used as LAN interface * 12-24V 1A DC * internal antennas Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* images: Fix sysupgrade.tar for devices with NOR flashSven Eckelmann2020-12-221-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NOR flash rootfs images stored in a sysupgrade.tar must end with the JFFS2 marker. Otherwise, devices like OpenMesh A42/A62 are not able to calculate the md5sum of the fixed squashfs part and store it inside the u-boot-env. But the commit ee76bd11bbe7 ("images: fix boot failures on NAND with small sub pages") adds up to 1020 0x00 bytes after the 0xdead0de EOF marker. The calculated md5sum will be wrong due do this change and u-boot will fail to boot the newly flashed device with a message like: Validating MD5Sum of 'vmlinux'... Passed! Validating MD5Sum of 'rootfs'... Failed! 583a1b7b54b8601efa64ade42742459b != 8850ee812dfd7638e94083329d5d2781 Data validation failed! and boot the old image again. Since the original change should not change the behavior of NOR images, just check for the deadc0de marker at the end of the squashfs-jffs2 image do avoid the problematic behavior for these images. Fixes: ee76bd11bbe7 ("images: fix boot failures on NAND with small sub pages") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* scripts/om-fwupgradecfg-gen.sh: Generate checksum over whole squashfsSven Eckelmann2020-12-221-6/+3
| | | | | | | | | | | The rootfs is padded to the full block size by padjffs2 and a 4 byte magic value ("deadc0de") is added to the end. On first boot, the JFFS2 is replacing the "deadc0de" marker when the rootfs_data is initialized. The static part of the rootfs is therefore $rootfs_size - 4 and not $rootfs_size - 262144 - 4. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* scripts/om-fwupgradecfg-gen.sh: Drop block alignment codeSven Eckelmann2020-12-221-5/+1
| | | | | | | The padding and block alignment is handled by the image build script and doesn't need to be duplicated in the fwupgrade.cfg build script. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* scripts: add -N option to mkhash for printing without newlineINAGAKI Hiroshi2020-12-221-7/+13
| | | | | | Added "-N" option, it allow printing hash(es) without newline. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* build/json: add filesystem informationPaul Spooren2020-12-131-0/+1
| | | | | | | | Some images are created using different filesystems, most popular squashfs and ext4. To allow downstream projects to distinguesh between those, add the `filesystem` information to created json files. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts/feeds: fix preference of package installKarel Kočí2020-12-091-16/+14
| | | | | | | | | | | | | | The previous behavior prefered same feed for dependent packages as initial package. This caused inconsitency in installation of packages. The difference was if two feeds provide same package (different version) there was different result if you executed install for that specific version compared to install for package depending on it from different feed. This ensures that preferred feed is propagated without change and selected feed is used only really for package it was selected for. Signed-off-by: Karel Kočí <karel.koci@nic.cz>
* scripts/feeds: warn when skipping core package overrideBrian Norris2020-12-091-1/+4
| | | | | | | | | | Otherwise, a n00b like myself can get quite confused when moving a package from core to feeds, for example. (Hint: one *really* needs to clear out the tmp/info/.packageinfo... entries for the stale package, but '-f' works as well.) Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* build: mkhash on FreeBSDPiotr Stefaniak2020-11-271-0/+7
| | | | | | | | Apply patch from https://bugs.openwrt.org/index.php?do=details&task_id=971 in order to make it easier to build OpenWRT on FreeBSD. Signed-off-by: Piotr Stefaniak <pstef@freebsd.org>
* download.pl: properly cleanup intermediate .hash filePetr Štetiar2020-11-271-1/+1
| | | | | | | | | | It seems like after a build the /dl dir seems to now contain a .hash file for each source file due to inproper cleanup so fix it by removing those intermediate files before leaving the download action. Fixes: 4e19cbc55335 ("download: handle possibly invalid local tarballs") Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* download: handle possibly invalid local tarballsPetr Štetiar2020-11-271-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently it's assumed, that already downloaded tarballs are always fine, so no checksum checking is performed and the tarball is used even if it might be corrupted. From now on, we're going to always check the downloaded tarballs before considering them valid. Steps to reproduce: 1. Remove cached tarball rm dl/libubox-2020-08-06-9e52171d.tar.xz 2. Download valid tarball again make package/libubox/download 3. Invalidate the tarball sed -i 's/PKG_MIRROR_HASH:=../PKG_MIRROR_HASH:=ff/' package/libs/libubox/Makefile 4. Now compile with corrupt tarball source make package/libubox/{clean,compile} Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/feeds: silence git warning by selecting pull styleHannu Nyman2020-11-261-2/+2
| | | | | | | Silence the warning in git 2.27 about undefined fast-forward style in git pull. Define "ff-only" as the style. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* scripts: add size_compare.shPaul Spooren2020-11-241-0/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As package size changes are a continuous topic on the mailing list this scripts helps developers to compare their local package modifications against latest upstream. The script downloads the latest package indexes based on env variables or the `.config` file. The script compares the actual installed size (data.tar.gz) or the IPK package size. An example output is found below: ``` user@dawn:~/src/openwrt/openwrt$ ./scripts/size_compare.sh Compare packages of ath79/tiny/mips_24kc: dropbear busybox iw ubus Checking configuration difference % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 554 100 554 0 0 336 0 0:00:01 0:00:01 --:--:-- 336 --- start config diff --- --- /tmp/config.DDjwVh-LOCAL 2020-11-23 09:08:28.913203068 -1000 +++ /tmp/config.DDjwVh-UPSTREAM 2020-11-23 09:08:36.369240887 -1000 @@ -1,5 +1,9 @@ +CONFIG_ALL_KMODS=y +CONFIG_ALL_NONSHARED=y CONFIG_AUTOREBUILD=y +CONFIG_AUTOREMOVE=y --- 8< --- CONFIG_BINARY_FOLDER="" +CONFIG_BUILDBOT=y +CONFIG_TARGET_ALL_PROFILES=y CONFIG_TARGET_ROOTFS_DIR="" CONFIG_USE_SSTRIP=y CONFIG_USE_UCLIBCXX=y --- end config diff --- Checking installed size Fetching latest package indexes... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 80634 100 80634 0 0 33499 0 0:00:02 0:00:02 --:--:-- 33485 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 54082 100 54082 0 0 24252 0 0:00:02 0:00:02 --:--:-- 24252 Comparing package sizes... Change Local Remote Package +271 51386 51115 base-files +123 705241 705118 bnx2-firmware +86 17209 17123 fstools +22 47989 47967 procd +21 208311 208290 busybox +19 67181 67162 netifd ``` I plan to integrate this script into the CI so we have a summary how sizes change over different architectures. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: download.pl: retry download using filenameDavid Bauer2020-11-201-2/+6
| | | | | | | | | | | | | | | | With this commit, the download script will try downloading source files using the filename instead of the url-filename in case the previous download attempt using the url-filename failed. This is required, as the OpenWrt sources mirrors serve files using the filename files might be renamed to after downloading. If the original mirror for a file where url-filename and filename do not match goes down, the download failed prior to this patch. Further improvement can be done by performing this only for the OpenWrt sources mirrors. Signed-off-by: David Bauer <mail@david-bauer.net>
* scripts: add const_structs.checkpatch for checkpatch.plAdrian Schmutzler2020-11-181-0/+68
| | | | | | | | | | | | | | | | | | Kernel has separated the structs that are reported to be const in checkpatch.pl into a file of its own, const_structs.checkpatch. This file has been missing after the recent update of checkpatch.pl, leading to the following message: No structs that should be const will be found - file '/data/openwrt/scripts/const_structs.checkpatch': No such file or directory This commit adds the relevant file from v5.10-rc4. Fixes: 086ee09bbcac ("scripts: Update checkpatch.pl to 2020-06-11") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts: checkpatch.pl: suppress warnings about MAINTAINERSAdrian Schmutzler2020-11-181-1/+1
| | | | | | | | | | | | | | | | | | | The kernel expects changes to MAINTAINERS for all removed or added files, printing warnings like: WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #828: deleted file mode 100644 Since this does not apply to "our" files in OpenWrt repo, this warning should be disabled. This can be achieved easiest by setting $reported_maintainer_file to 1. While this is a hack that tricks the script into believing the proper MAINTAINERS changes have been made, it's the easiest solution as it does not require to touch any other code. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/kconfig.pl: allow regex syntax in filtering out config entriesFelix Fietkau2020-11-131-2/+9
| | | | | | | This will be used to filter out some autogenerated config values from the kernel config files Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts: add spelling.txt for checkpatch.plPaul Spooren2020-11-121-0/+1517
| | | | | | | | | | | | | | | | | | | | | | Running the updated checkpatch version with spelling.txt show that spelling mistakes happen to everyone. > /target/linux$ fd .*.patch | xargs ../../scripts/checkpatch.pl | rg spell WARNING: 'usefull' may be misspelled - perhaps 'useful'? WARNING: 'afecting' may be misspelled - perhaps 'affecting'? WARNING: 'usefull' may be misspelled - perhaps 'useful'? WARNING: 'afecting' may be misspelled - perhaps 'affecting'? WARNING: 'begining' may be misspelled - perhaps 'beginning'? WARNING: 'superflous' may be misspelled - perhaps 'superfluous'? WARNING: 'multipe' may be misspelled - perhaps 'multiple'? WARNING: 'recieves' may be misspelled - perhaps 'receives'? WARNING: 'retreive' may be misspelled - perhaps 'retrieve'? WARNING: 'tranfer' may be misspelled - perhaps 'transfer'? WARNING: 'additonal' may be misspelled - perhaps 'additional'? WARNING: 'accomodate' may be misspelled - perhaps 'accommodate'? [...] Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: checkpatch remove device-tree doc checkPaul Spooren2020-11-121-47/+0
| | | | | | | Remove checks for device tree documentation as the OpenWrt tree comes withouth the ./Documentation folder. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: Update checkpatch.pl to 2020-06-11Paul Spooren2020-11-121-567/+3995
| | | | | | | | Checkpatch grown in functionallity and we should make use of that. If OpenWrt patches should be upstream material they should also be checked based on upstream checkpatch.pl instead of 2013. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: store SOURCE_DATE_EPOCH in JSON info filesPaul Spooren2020-11-121-0/+1
| | | | | | | | The source date epoch is the only reproducible date close to the actual build date. It can be used for tooling like the firmware wizard to show the image age. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: mkhash fail on hashing a folderPaul Spooren2020-11-091-0/+8
| | | | | | | | | | | | | | | | | | mkhash currently returns the hash of an empty input when trying to hash a folder. This can be missleading in caseswhere e.g. an env variable is undefined which should contain a filename. `mkhash ./path/to/$FILE` would exit with code 0 and return a legit looking checksum. A better behaviour would be to fail with exit code 1, which imitates the behaviour of `md5sum` and `sha256sum`. To avoid hashing of folders the `stat()` is checked. Hashing empty inputs result in the following checksums: md5: d41d8cd98f00b204e9800998ecf8427e sha256: e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: mkhash fix return code handlingPaul Spooren2020-11-091-2/+5
| | | | | | | | | If hashing a file fails mkhash shouldn't just silently fail. Now check after each call of `hash_file()` the return and exit early in case of errors. The return value which was previously ignored and would always return 0. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: mkhash show -n option in usagePaul Spooren2020-11-091-1/+4
| | | | | | | | | | The -n option prints the filename of hashed files next to the calculated checksum. Reflect that in the usage message. user@dawn:~/src/openwrt/openwrt$ ./a.out md5 -n .config eb06db36e7b6751cb18801945e46bf5d .config Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: bundle-libraries.sh: fix broken SDK compilerPetr Štetiar2020-11-021-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | Recent versions (> 5.33) of `file` report liblto_plugin.so as executable: $ file liblto_plugin.so liblto_plugin.so.0.0.0: ELF 64-bit LSB pie executable ... Which then leads to improper packaging of the plugin, resulting in the broken compiler: configure: checking whether the C compiler works mips-openwrt-linux-musl/bin/ld: liblto_plugin.so: error loading plugin: liblto_plugin.so: invalid ELF header As the LTO compiler plugin library is incorrectly packaged as SDK executable: $ head -1 ~/staging_dir/toolchain...libexec/gcc/.../liblto_plugin.so #!/usr/bin/env bash Fix this by filtering out shared libraries from the patching. Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1296868 Acked-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/getver.sh: silence rev-list errorsPetr Štetiar2020-11-021-3/+3
| | | | | | | | | | | Shallow copies are quite common on CI platforms nowadays, making REBOOT tag unavailable, thus producing following confusing errors in the build logs: fatal: Invalid revision range ee53a240ac902dc83209008a2671e7fdcf55957a..HEAD fatal: Invalid revision range ee53a240ac902dc83209008a2671e7fdcf55957a..0493d57e04774d47921a7d2014b567455d5dc16b Signed-off-by: Petr Štetiar <ynezz@true.cz>