diff options
| author | Sven Eckelmann <sven@narfation.org> | 2020-11-23 13:41:34 +0100 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2020-12-22 19:11:50 +0100 |
| commit | 5fc28ef47959c1256f2553d507224bb481b08494 (patch) | |
| tree | 2b84e59d7b658d37c2f648590013638e51ddfb2d /scripts | |
| parent | 727eebbad1b9dea91174ea675cb64ea13484f790 (diff) | |
| download | upstream-5fc28ef47959c1256f2553d507224bb481b08494.tar.gz upstream-5fc28ef47959c1256f2553d507224bb481b08494.tar.bz2 upstream-5fc28ef47959c1256f2553d507224bb481b08494.zip | |
ath79: Add support for Plasma Cloud PA300
Device specifications:
* Qualcomm/Atheros QCA9533 v2
* 650/600/217 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash (mx25l12805d)
- 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4 GHz Wi-Fi
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
- eth0
+ Label: Ethernet 1
+ 24V passive POE (mode B)
+ used as WAN interface
- eth1
+ Label: Ethernet 2
+ 802.3af POE
+ builtin switch port 2
+ used as LAN interface
* 12-24V 1A DC
* internal antennas
Flashing instructions:
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Diffstat (limited to 'scripts')
| -rwxr-xr-x | scripts/om-fwupgradecfg-gen.sh | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/scripts/om-fwupgradecfg-gen.sh b/scripts/om-fwupgradecfg-gen.sh index ce33454a24..98464c631b 100755 --- a/scripts/om-fwupgradecfg-gen.sh +++ b/scripts/om-fwupgradecfg-gen.sh @@ -7,7 +7,7 @@ # usage() { - echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62> <out file path> <kernel path> <rootfs path>" + echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62|PA300> <out file path> <kernel path> <rootfs path>" rm -f $CFG_OUT exit 1 } @@ -20,6 +20,7 @@ KERNEL_PATH=$3 ROOTFS_PATH=$4 case $CE_TYPE in + PA300|\ OM2P) MAX_PART_SIZE=7168 KERNEL_FLASH_ADDR=0x1c0000 |