aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
...
* layerscape: Change to combined rootfs on sd imagesPawel Dembicki2020-10-266-17/+17
| | | | | | | | | | | | | | | | | | At this moment layerscape images are ext4 only. It causes problem with save changes durring sysupgrade and make "firstboot" and failsafe mode useless. This patch changes sd-card images to squashfs + f2fs combined images. To make place, for saving config, kernel space ar now ext4 partition with fit kernel. This method of image generation is similar to rest of OpenWrt sd-card targets. Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [reword README, reword DEVICE_COMPAT_MESSAGE, keep original indent] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: add dtb to sysupgradePawel Dembicki2020-10-267-7/+7
| | | | | | | | | | | | | | | | | | | At this moment sysupgrade replaces only kernel and rootfs. This patch add dtb part to sysupgrade images to avoid situation when old dtb make system broken. Is possible to sysupgrade older images for NOR devices: 1. Firmware partition in bootargs need to be updated to: "49m@0xf00000(firmware)". Env should be saved after changes. 2. After step one, "sysupgrade -F" will work. Run tested: LS1046A-RDB Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [bump PKG_RELEASE for uboot-layerscape] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ubus: bump to git HEADDaniel Golle2020-10-251-3/+3
| | | | | | ad0cd11 ubusd_acl: add support for wildcard in methods Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* busybox: make username consistentDaniel Golle2020-10-253-4/+4
| | | | | | | | | ntpd in packages feed had already a user 'ntp' with UID 123 declared. Rename the username of busybox-ntpd to be 'ntp' instead of 'ntpd' so it doesn't clash. Reported-by: Etienne Champetier <champetier.etienne@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: adapt to non-root ntpdDaniel Golle2020-10-252-1/+10
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* busybox: allow ntpd to run as non-root ntpd userDaniel Golle2020-10-254-1/+45
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: ujail fixesDaniel Golle2020-10-251-3/+3
| | | | | | | ec461ff jail: mount more stuff read-only 33b799b ujail: elf: work around GCC bug on MIPS64 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ubox: run logd non-root as user logdDaniel Golle2020-10-251-4/+5
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: bump to version 2020-10-22Yousong Zhou2020-10-241-3/+3
| | | | | | | | | | | | | | | Changelog follows ced0d535 build: find and use libnl header dirs 5722218e proto: rework parse_addr to return struct device_addr 3d7bf604 device_addr: record address index as in the blob 24ce1eab interface: proto_ip: order by address index first This bump mainly affects order of interface addresses in ubus output. At the moment dnsmasq uses first address of an interface for setting dhcp-range option in its config Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* rpcd: adapt defaults for changed ubus.sock pathDaniel Golle2020-10-223-2/+10
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uhttpd: adapt defaults for changes ubus.sock pathDaniel Golle2020-10-223-2/+7
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: merge /etc/passwd et al at sysupgrade config restoreDaniel Golle2020-10-222-1/+17
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: jail: clean up capability handling and non-root ubusdDaniel Golle2020-10-211-3/+3
| | | | | | | | | | | | | | | Unify capability handling to only use OCI spec parsers even for ujail slim containers which previously supposedly used their own format. 80c9516 cgroups: restrict allowed keys in 'unified' section 5ade567 cgroups: memory controller fixes 3121467 early: run ubusd non-root as user ubus, group ubus 12a5b97 jail: adapt to new ubus socket path 788d144 instance: actually wire up capabilities filename ebc5a7f jail: nuke old capabilities code in favour of reusing OCI code 6c5233a jail: capabilities: apply in two phases Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ubus: prepare to run ubusd as non-root userDaniel Golle2020-10-211-3/+4
| | | | | | | Move /var/run/ubus.sock to /var/run/ubus/ubus.sock in preparation for having ubusd run as non-root user. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* target: include selinux-variants if CONFIG_SELINUX is setDaniel Golle2020-10-211-1/+1
| | | | | | | | Rather than unconditionally adding busybox and procd to the set of default packages, add busybox-selinux and procd-selinux in case CONFIG_SELINUX is set. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: save survey for every channel visitedMarkov Mikhail2020-10-211-0/+183
| | | | | | | | | | | | | | | rt2800 olny gives you survey for current channel. Survey-based ACS algorithms are failing to perform their job when working with rt2800. Make rt2800 save survey for every channel visited and be able to give away that information. There is a bug registred https://dev.archive.openwrt.org/ticket/19081 and this patch solves the issue. Signed-off-by: Markov Mikhail <markov.mikhail@itmh.ru>
* sunxi: Adapt U-Boot config to board renameHauke Mehrtens2020-10-181-1/+1
| | | | | | | | The board was renamed without changing the BUILD_DEVICES in the U-Boot Makefile, this broken the build. Fixes: 0830ae3a2fdf ("sunxi: Correct manufacturer name to Sinovoip") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add support for FriendlyARM NanoPi R1Jayantajit Gogoi2020-10-182-0/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz - DDR3 RAM: 512MB/1GB - Network: 10/100/1000M Ethernet x 1, 10/100M Ethernet x 1 - WiFi: 802.11b/g/n, with SMA antenna interface - USB Host: Type-A x2 - MicroSD Slot x 1 - MicroUSB: for OTG and power input - Debug Serial Port: 3Pin 2.54mm pitch pin-header - LED: nanopi:red:status nanopi:green:wan nanopi:green:lan - KEY: reset - Power Supply: DC 5V/2A Installation: - Write the image to SD Card with dd - Boot NanoPi from the SD Card Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
* base-files: remove block2mtd checks from sysupgradeFelix Fietkau2020-10-171-4/+0
| | | | | | This hasn't been used in a long time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix memory leak on filtered powersave framesFelix Fietkau2020-10-171-0/+55
| | | | | | | | | | After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged packets for stations in powersave mode. To fix this, move the code handling those packets from __ieee80211_tx_status into ieee80211_tx_status_ext Reported-by: Tobias Waldvogel <tobias.waldvogel@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* selinux-policy: update to git tag v0.3Daniel Golle2020-10-161-3/+3
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: update to git HEADDaniel Golle2020-10-161-3/+3
| | | | | | | | | | | 8e0f29a mount: remove support for legacy overlayfs before v2.3 0f8a443 mount: fix log format string and indentation 46a56d3 overlay: use precompiler macros for reoccuring path names f25ab8a mount: apply SELinux labels before overlayfs mount Total ipk size change (ipq40xx): +120b Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* policycoreutils: 'restorecon' is a 'setfiles' appletDaniel Golle2020-10-161-7/+2
| | | | | | | | Instead of duplicating the '/sbin/setfiles' binary, have '/sbin/restorecon' as yet another alias for '/sbin/policycoreutils-setfiles'. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: ubus: add handler for wps_status and guard WPS callsDaniel Golle2020-10-163-1/+57
| | | | | | | | | Expose WPS ubus API only if compiled with WPS support and add new handler for wps_status call. Also add '-v wps' option to check whether WPS support is present in hostapd. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: always build package/kernel/linuxFelix Fietkau2020-10-151-0/+1
| | | | | | | | | | build: always build package/kernel/linux If no in-tree module packages are selected, the build system does not process package/kernel/linux. This package is required for building the virtual 'kernel' package, which is specified as a dependency for all kernel packages. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sunxi: add support for FriendlyArm ZeropiArturas Moskvinas2020-10-113-0/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | Specification CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz DDR3 RAM: 256MB/512MB Connectivity: 10/100/1000Mbps Ethernet USB Host: Type-A x 1 MicroSD Slot x 1 MicroUSB: for power input only Debug Serial Port: 4Pin, 2.54 mm pitch pin header Power Supply: DC 5V/2A PCB Dimension: 40 x 40 x 1.2mm Installation: Burn the image file to an SD Card with dd or any image burning tool Boot ZeroPi from the SD Card The following features are working and tested: Ethernet port 10/100/1000M Ethernet Remarks: SBC is mostly compatible and boots with FriendlyARM NanoPI M1 plus DTS also (zeropi has no working hdmi) Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
* kernel: add a kmod package for the SoC S/PDIF codecAndre Heider2020-10-111-0/+14
| | | | | | | | Size of the modules for a Cortex A7 build: 43920 linux-5.4.66/sound/soc/codecs/snd-soc-spdif-rx.ko 44044 linux-5.4.66/sound/soc/codecs/snd-soc-spdif-tx.ko Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: fix name of CONFIG_SND_SOC_GENERIC_DMAENGINE_PCMAndre Heider2020-10-111-2/+2
| | | | | | | | | CONFIG_SND_SOC_DMAENGINE_PCM was removed and replaced with CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM seven years ago, see: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=28c4468b00a1e55e08cc20117de968f7c6275441 https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b7ae6f31d8243ec684af16bc5c763eccdfabaec0 Signed-off-by: Andre Heider <a.heider@gmail.com>
* uboot-envtools: mvebu: fix config for mainline u-bootAndre Heider2020-10-111-1/+8
| | | | | | | | | | | | Mainline u-boot dynamically passes the mtd partitions via devicetree: $ cat /proc/mtd dev: size erasesize name mtd0: 003f0000 00001000 "firmware" mtd1: 00010000 00001000 "u-boot-env" Add support for this setup. Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: Move CONFIG_*_FS_XATTR to generic kernel configHauke Mehrtens2020-10-111-3/+1
| | | | | | | This option is now activated in the generic kernel configuration, no need to do it for a specific package. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: move CONFIG_F2FS_CHECK_FS to generic kernel configHauke Mehrtens2020-10-111-4/+1
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Move CONFIG_F2FS_FS_SECURITY to generic kernel configHauke Mehrtens2020-10-111-1/+0
| | | | | | | Move the CONFIG_F2FS_FS_SECURITY kernel configuration option to the generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Remove 2FS_FS_XATTR and F2FS_STAT_FS symbols from target configsHauke Mehrtens2020-10-111-2/+0
| | | | | | | This config option was moved to the generic kernel configuration. Fixes: ab1bd576562b ("kernel: move F2FS_FS_XATTR and F2FS_STAT_FS symbols to generic") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-mvebu: fix topology for ESPRESSObin V3-V5 (1GB 1CS)Andre Heider2020-10-111-1/+1
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
* uboot-mvebu: don't install 64bit binariesAndre Heider2020-10-111-0/+4
| | | | | | | u-boot binaries are not useful for these boards, they need to be combined with atf for a proper firmware. Signed-off-by: Andre Heider <a.heider@gmail.com>
* uboot-mvebu: don't default to enable a3700 buildsAndre Heider2020-10-111-3/+0
| | | | | | | u-boot binaries for this SoC are only required for the atf package, disable them per default so they don't get build unnecessarily. Signed-off-by: Andre Heider <a.heider@gmail.com>
* uboot-mvebu: don't add CONFIG_NET_RANDOM_ETHADDR to defconfigAndre Heider2020-10-111-1/+0
| | | | | | | All targets already enable it in their defconfig with the used u-boot version. Signed-off-by: Andre Heider <a.heider@gmail.com>
* uboot-mvebu: update to v2020.10Andre Heider2020-10-118-186/+40
| | | | | | Remove merged patches and update the emmc set. Signed-off-by: Andre Heider <a.heider@gmail.com>
* trace-cmd: disable AUDIT (libaudit library)Josef Schlehofer2020-10-111-1/+2
| | | | | | | | | | | | | If you compile first libaudit library and then trace-cmd package, compilations fails with: Package trace-cmd is missing dependencies for the following libraries: libaudit.so.1 If you enable libaudit for trace-cmd, it will show system name calls while using command profile. Try to be slim as much as possible - libaudit .ipk has 42,4 kB. Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* perf: disable libzstd supportRosen Penev2020-10-111-1/+2
| | | | | | | | | | | libzstd from the packages feed gets picked up. Remove it. Fixes: Package perf is missing dependencies for the following libraries: libzstd.so.1 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* perf: pass CFLAGS correctlyMarek Behún2020-10-111-1/+1
| | | | | | | For this package CFLAGS have to be passed via EXTRA_CFLAGS. On arm this bug causes build to fail because no -fPIC is present in CFLAGS. Signed-off-by: Marek Behún <kabel@blackhole.sk>
* perf: fix building with musl when NLS is enabledMarek Behún2020-10-111-0/+3
| | | | | | | | | | | This package fails with a strange error when building with musl when NLS is enabled. The configuration thinks that libelf is not present, even though DEPENDS contains +libelf, because when NLS is enabled, libelf.so depends on libintl, and the correct LDFLAGS are missing for libintl-full. This then causes the configuration script to check for glibc, but this fails because we are using musl. Signed-off-by: Marek Behún <kabel@blackhole.sk>
* netifd: update to latest git HEADHans Dedecker2020-10-101-3/+3
| | | | | | 64ff909 system-linux: initialize ifreq struct before using it Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* seclic: depends on libsepolDaniel Golle2020-10-091-0/+1
| | | | | | | Add missing dependency for target build of seclic which requires libsepol (just like the host build requires libsepol/host). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* selinux-policy: adds new packageDominick Grift2020-10-092-0/+55
| | | | Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* secilc: adds new packageDominick Grift2020-10-091-0/+65
| | | | Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* rt2x00: mt7620: differentiate based on SoC's CHIP_VERDaniel Golle2020-10-092-0/+547
| | | | | | | | | | | | | | | | | | | | | | | The vendor driver does things differently based on what it finds in the SoC's CHIP_VER register, which should tell whether this is MT7620N or MT7620A (PKG) and probably also the revision (VER) and most likely also something about the silicon implementer (ECO). Introduce codepaths just like the ones in the vendor driver to handle the different chips properly. Some of those paths are most likely dead code and left-overs from FPGA versions or early prototypes of the chip. It'd thus be great if people can post their kernel logs, at least the line telling the chip version and eco, so we know what's actually out there in the wild -- all I could find is [ 0.000000] SoC Type: Ralink MT7620A ver:2 eco:6 and [ 0.000000] SoC Type: Ralink MT7620N ver:2 eco:6 which would make things easier, as then we really just need to know whether it's MT7620N or MT7620A and not care about FPGA or prototypes with ver <= 1 and eco <= 2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: improve support for Edgecore ECW5211Sungbo Eo2020-10-072-2/+0
| | | | | | | | | | | | | | | | | | | This adds several stylistic and functional improvements of the recently added Edgecore ECW5211, especially: * Drop the local BDFs as those are already in the upstream under different names * Add SPDX tag to DTS * Add label MAC address * Move LED trigger to DTS * Remove unnecessary status="okay" * Disable unused SS USB phy as the USB port only supports USB 2.0 * Make uboot-env partition writable * Remove qcom,poll_required_dynamic property as the driver does not use it * Tidy up the device recipe Fixes: 4488b260a02e ("ipq40xx: add Edgecore ECW5211 support") Signed-off-by: Sungbo Eo <mans0n@gorani.run> Acked-by: Robert Marko <robert.marko@sartura.hr>
* ppp: update to version 2.4.8.git-2020-10-03Hans Dedecker2020-10-051-3/+3
| | | | | | | 2937722 Enable IPv6 by default (#171) 6d39c65 pppd: Fix blank password usage Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uhttpd: update to latest Git HEADJo-Philipp Wich2020-10-041-3/+3
| | | | | | | | | | | | | 14a3cb4 ubus: fix legacy empty reply format 0f38b03 client: fix spurious keepalive connection timeouts 88ba2fa client: really close connection on timeout c186212 ubus: support GET method with CORS requests Fixes: FS#3369 Fixes: https://github.com/openwrt/luci/issues/4467 Fixes: https://github.com/openwrt/luci/issues/4470 Fixes: https://github.com/openwrt/luci/issues/4479 Signed-off-by: Jo-Philipp Wich <jo@mein.io>