aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* kernel: make kmod-mmc unavailable on UMLJonas Gorski2017-04-101-0/+1
| | | | | | | | MMC requires IOMEM support, which UML doesn't have. Fixes mac80211 build, as mwifiex-sdio depends on MMC support. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ath9k: drop obsolete patchMathias Kresin2017-04-084-43/+4
| | | | | | | Now that the wireless LEDs are added via platform leds this patch isn't required any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath9k: ignore led_pin if ath9k GPIO controller is used with DTMathias Kresin2017-04-082-6/+8
| | | | | | | | Don't setup the default led pin if the ath9k GPIO controller is used via device tree to prevent collision. In case any of the pins exposed by the ath9k is used, the phyNtpt trigger needs to be set in userspace. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath9k: enable GPIO chip only if requested via DTMathias Kresin2017-04-082-10/+21
| | | | | | | | In case that the atheros device tree binding is used, enable access to the GPIO chip only if the gpio-controller device tree parameter is used for the ath9k node. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath9k: unset the default LED pin if used by platform ledsMathias Kresin2017-04-084-31/+27
| | | | | | | | | Unset the default LED gpio pin if the same gpio pin is used by a LED defined via platform LED. This prevents that the default led trigger gets assigned to this LED and the GPIO value gets changed on wifi up/down in case the led is not used for signaling the wifi state. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: add thermal monitor for nct6775/6776Philip Prindeville2017-04-071-0/+15
| | | | | | | Support for the nct6775/6776 hwmon chips, and other compatibles in the family as well as the Intel on-chip thermal sensors. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* mt76: ensure that the metapackage gets built as .ipkFelix Fietkau2017-04-051-0/+4
| | | | | | Fixes errors during the image builder run Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport an upstream fix for queue start/stop handlingFelix Fietkau2017-04-031-0/+29
| | | | | | Fixes issues with 802.11s Signed-off-by: Felix Fietkau <nbd@nbd.name>
* modules: Add kmod-igbvf kernel module for Intel(R) 82576 Virtual Function ↵Ye Tao2017-04-031-0/+18
| | | | | | | | | | | | | | | | Ethernet adapters Intel(R) 82576 is an adapter which supports SR-IOV. Thus the host can assign Virtual Functions (VFs) to different VMs by the PCI-E Passthrough (e.g. VFIO for KVM), to gain different advantages (performance, VF to VF communications, host kernel offload, etc.). The driver of the passthroughed VFs is the igbvf (igb is NOT compatible). This is essential for VM guests, to enable them to utilize this feature. Signed-off-by: Ye Tao <tydus@hongo.wide.ad.jp>
* mac80211: rt2x00: import upstream changes and rebase our patchesDaniel Golle2017-03-3049-189/+1676
| | | | | | | | Some of our local patches have been accepted upstream. And there are some more relevant changes (mostly for rt2800usb). Import them and rebase our remaining local patches on top. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add w83627hf-wdt watchdog timer modulePhilip Prindeville2017-03-291-0/+15
| | | | | | | | | This is a 3rd party chipset which is not present on all Intel reference designs, so make it a module rather than baked in (this will also alleviate conflicts with drivers which also detect some of the same chipsets). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: kmod packaging for Intel 10G ethernet ixgbe driverPhilip Prindeville2017-03-292-0/+35
| | | | | | | A lot of Ivybridge and Haswell servers have the 82598/82599 Ethernet controllers. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* mac80211: ath10k: allow failure getting board id via otpHannu Nyman2017-03-281-0/+11
| | | | | | | | | | | | | | | ath10k tries to fetch board id via otp, but that fails for many chips like QCA988x, QCA9984 etc. Recent commit cc189c0b7f removed the earlier hack that had allowed QCA radios to work, as that hack was incompatible with the new wifi chips being introduced to the source tree. Restore functionality for the existing wifi chips by modifying the return value of the 'board id via otp' function to a value that is recognised as a harmless error, so that name evaluation continues by using the board file. Patch originally suggested by Christian Lamparter in forum discussion. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* kernel: Fix F2FS module dependenciesShane Peelar2017-03-271-0/+1
| | | | | | F2FS depends on the crc32_generic module (NOT crc32c_generic) Signed-off-by: Shane Peelar <lookatyouhacker@gmail.com>
* kernel: Add kmod-crypto-crc32 (crc32_generic.ko)Shane Peelar2017-03-271-0/+11
| | | | | | | This is needed for F2FS support (it depends on crc32_generic, not crc32c_generic). Signed-off-by: Shane Peelar <lookatyouhacker@gmail.com>
* lantiq: align falcon code with ar9-vr9 codeStefan Koch2017-03-271-70/+3
| | | | Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: cleanup code ar9-vr9 partsStefan Koch2017-03-272-155/+131
| | | | | | | | | | - remove unused code within 500-ar9_vr9.patch - fixed return of IFX_ERROR (solves SIGSEGV in asterisk at failure) - align it a bit with 400-falcon.patch - remove 600-kernel-4.9.patch since changed parts are removed during cleanup Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: remove residual watchdog parts from ltq-vmmcStefan Koch2017-03-241-3/+94
| | | | | | | | | | | | modify 500-ar9_vr9.patch from commit 29367aac42d6 ("lantiq: ltq-vmmc add support for ar9-vr9") - remove unused dependencies to external watchdog functions (wdog setup is already disabled) - using header file from kernel (asm/vpe.h) instead patched file (vpe.h) - cleanup whitspace warning Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* ath9k: fix power limits on initFelix Fietkau2017-03-221-0/+47
| | | | | | | | | | | | | | | The tx power applied by set_txpower is limited by the CTL (conformance test limit) entries in the EEPROM. These can change based on the user configured regulatory domain. Depending on the EEPROM data this can cause the tx power to become too limited, if the original regdomain CTLs impose lowr limits than the CTLs of the user configured regdomain. To fix this issue, set the initial channel limits without any CTL restrictions and only apply the CTL at run time when setting the channel and the real tx power. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath: do not apply broken power limits with ATH_USER_REGDFelix Fietkau2017-03-223-12/+44
| | | | | | | | | If a device uses the default EEPROM code, typically only the main CTLs are valid, and they do not apply properly when switching to a different regulatory domain. If the regdomain deviates from the EEPROM one, force the world roaming regdomain to ensure that power limits are sane Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Fix race condition leading to wifi interfaces not coming up at ↵Vittorio Gambaletta2017-03-221-5/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | boot sometimes. In the drv_mac80211_setup function, mac80211_interface_cleanup is called to ask the kernel to delete all existing interfaces for the phy that is being configured via netlink. Later in the first function, mac80211_prepare_vif is called to set up the new interfaces as required. But sometimes, when mac80211_prepare_vif (and so the relevant `iw phy x interface add y` command) runs, the kernel might still be cleaning up the old interface with the same ifname. It usually takes very few time to do that; possibly a few milliseconds of sleep in the script after detecting this error condition could be enough, but the busybox sh does not support sub-second sleep intervals. When this happens, iw obviously fails to create the new interface; and the following message is printed in the system log, followed by subsequent failure messages from hostapd in case this would have been an AP interface. Tue Mar 14 04:21:57 2017 daemon.notice netifd: radio1 (2767): command failed: Too many open files in system (-23) This was a long-standing issue existing since at least OpenWrt Backfire, and today I finally managed to debug and (hopefully) solve it. It was happening very few times on most devices; but it was happening a lot more frequently on fast platforms with multiple radios, such as the powerpc-based dual-ath9k-radio tl-wdr4900-v1. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
* mac80211: enable ath10k AHB support for QCA4019Christian Lamparter2017-03-224-51/+50
| | | | | | | | | | | | | | | | This patch enables the ATH10K_AHB support for the QCA4019 devices on the AHB bus. This patch also removes 936-ath10k_skip_otp_check.patch because it breaks the AHB device identification. "Patch is wrong. I find it frustrating OpenWRT/LEDE doesn't try to work with upstream on ixing these things right." [1] <https://www.mail-archive.com/ath10k@lists.infradead.org/msg05896.html> It also limits ath10k memory hunger (This is a problem with 128MiB RAM) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: brcmfmac: backport patches pushed on 2017-03-20Rafał Miłecki2017-03-2111-5/+756
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: move disabling DRM symbols to the config fileRafał Miłecki2017-03-211-33/+1
| | | | | | | This is the standard way we handle this. Please note (it seems) I could drop few symbols as they are hidden under (disabled) DRM_LEGACY now. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: video: add kmod-i2c-core dependency to kmod-drmRafał Miłecki2017-03-211-1/+1
| | | | | | | | For targets with i2c not built-in this fixes following error: Package kmod-drm is missing dependencies for the following libraries: i2c-core.ko Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mt76: update to the latest version, fixes Mesh/IBSS crypto supportFelix Fietkau2017-03-171-3/+3
| | | | | | | | 9f02db7 mt76x2: fall back to software crypto for IBSS/Mesh per-sta GTK 4a54ab3 mt7603: fall back to software crypto for IBSS/Mesh per-sta GTK 712b8e8 mac80211: claim RSN IBSS support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Update wireless-regdb to master-2017-03-07Ryan Mounce2017-03-161-12/+19
| | | | | | | | | | | | | | | | The short log of changes since the 2016-06-10 release is below. Jouni Malinen (1): wireless-regdb: Remove DFS requirement for India (IN) Ryan Mounce (1): wireless-regdb: Update rules for Australia (AU) and add 60GHz rules Seth Forshee (2): wireless-regdb: Update 5 GHz rules for Canada wireless-regdb: update regulatory.bin based on preceding changes Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* mt76: update to the latest version, improves mt7603 supportFelix Fietkau2017-03-151-3/+3
| | | | | | | | | | | | | | | | | 03e44dc mt76x2: remove unnecessary headroom check cc70498 mt76x2: clarify queue selection field b056a78 dma: fix endian issue in mt76_dma_get_buf f020a60 mt7603: support loading the entire EEPROM from OTP 29b08d3 mt7603: fix endian issue in mt7603_mcu_set_timing dce8aac mt7603: fix endian issue in mt7603_mac_fill_rx f22273b mt7603: init WTBL entry before setting capabilities da8e796 mt7603: check wtbl busy status and stop/start tx queues when clearing sta entry e54add5 mt7603: move napi/tasklet enable/disable outside of the locked section 59ce2b4 mt7603: set tx vif own MAC index (needed for beacons) 93ce124 mt7603: enable beacons for other virtual interfaces c91e660 mt7603: set secondary beacon time offsets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: tpm: add Infineon i2c supportIan Pozella2017-03-131-0/+15
| | | | | | (based on openwrt "kernel: add tpm support") Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com>
* rt2x00: mt7620: make fixes requested upstreamDaniel Golle2017-03-111-170/+674
| | | | | | | | Introduce RT6352 instead of matching against RF7620. Clean up channel setting rfvals. Port bandwidth filter calibration. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: mwifiex-sdio: select DRIVER_11AC_SUPPORTÁlvaro Fernández Rojas2017-03-111-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mac80211: mwifiex-pcie: select DRIVER_11AC_SUPPORTÁlvaro Fernández Rojas2017-03-111-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mac80211: mwifiex-sdio: select kmod-mmc instead of PCI_SUPPORTÁlvaro Fernández Rojas2017-03-111-1/+1
| | | | | | Should fix buildbot issues. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mac80211: add support for Marvell 802.11n/802.11ac SDIO Wireless cardsHenryk Heisig2017-03-111-1/+18
| | | | | | | This adds option to build kernel module and firmware packages for a Marvell 8887 SDIO Wireless device Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* rt2x00: mt7620: yet another beauty sessionDaniel Golle2017-03-091-171/+524
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So here is another round of improvements for MT7620 WiFi. This commit fixes a few significant issues related to TX_PWR_CFG_x and TX_ALC and also makes the code more readable by adding register descriptions for things added for MT7620 and use the usual bit-field access macros and the now defined macros instead of plain bit-ops and magic numbers. Properly describe EEPROM_TARGET_POWER at word 0x68 (== byte 0xD0) and thereby fix internal TXALC which would otherwise just read out-of-bounds of the EEPROM map. Split-out tx-power/ALC related stuff into an additional function. Fix VCO calibration, it was carried out properly in the channel switching but incomplete in the actual VCO calibration function. Also there is no need to trigger VCO calibration in channel switching, the VCO calibration function is already being called at this point. Remove it from channel switching function to avoid redundant code. The TX power calibration differs significantly from all other Mediatek/Ralink chips: They finally allow 0.5dB steps stored as 8-bit values for (almost) each bitrate -- and promptly ran out of space and for some reason didn't want to change the EEPROM layout. The hence opted for a scheme of sharing values for some adjecent bitrates and a highly over-complicated (or obfuscated?) way to populate the TX_PWR_CFG_x registers with the values stored in the EEPROM. The code here now looks much less complicated than what you see in the vendor's driver, however, it does the exact same thing: bGpwrdeltaMinus is a constant and always TRUE, hence half of the code was dead. Gpwrdelta is always 0 (rather than using the value read from the EEPROM). What remains is some very grotesque effort to avoid 0x20, probably some hardware bug related to some misunderstanding of what a singed 8-bit value is (imagine: if it was a signed 6-bit value then someone could believe that 0x20 == 0x0). And then they didn't clean it up once they later on anandonned that whole story of having a constant offset for 40 MHz channels and just set the offset to be constant 0 -- there is no effort for avoiding 0x20 for the 20 MHz values stored in the EEPROM, hence that's probably just a forbidden value in the EEPROM specs and won't appear anyway... Anyway, the whole thing felt like solving some college math test where in the end everything cancels out and the result equals 0 ;) To make sure that channel bandwidth power compensation really doesn't need to be taken care of, output a warning when the corresponding value stored in the EEPROM is non-zero. Also there is no apparent reason to refrain from initializing RFCSR register 13, it doesn't fail what-so-ever. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ar71xx: fix build without CONFIG_NOP_USB_XCEIV (FS#593)Felix Fietkau2017-03-071-2/+1
| | | | | | | | Open-code usb_phy_generic_register instead of calling it, since it is really trivial. Avoid pulling CONFIG_NOP_USB_XCEIV into the kernel config and add a proper dependency instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix usb chipidea controller supportFelix Fietkau2017-03-071-8/+19
| | | | | | | | | | | | | If ehci platform driver is loaded before the chipidea controller driver, both are competing for the same IO resources and the generic driver gets used for the hardware. This results in USB device mode being unavailable. Split generic EHCI support code out of kmod-usb2, so that the chipidea driver can be included without also pulling in the generic one. Also rework the load order, so that the chipidea driver gets loaded first, in case both are installed Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: disable deprecated CONFIG_USB_EHCI_ATH79 symbolFelix Fietkau2017-03-071-1/+0
| | | | | | USB_EHCI_HCD_PLATFORM is used instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm2708-gpu-fw: update to latest versionÁlvaro Fernández Rojas2017-03-041-7/+7
| | | | | | This is needed in order to add support for the new RPi Zero W Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: fix kmod-tpm-tis packagingJo-Philipp Wich2017-03-031-1/+3
| | | | | | The tmp-tis module depends on tpm_tis_core.ko, so package this file as well. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mac80211: brcmfmac: always print error when PSM's watchdog firesRafał Miłecki2017-03-012-1/+148
| | | | | | This error is important enough to be displayed even without debugging. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: Add TPM Module supportChris Blake2017-02-271-0/+47
| | | | | | | | The following will enable the TPM kernel module, as well as support for the atmel i2c TPM driver. Tested and confirmed working on an Aerohive AP-121 Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* kernel: enable hwmon-k10temp in the x86/64 kernel config instead of packaging itFelix Fietkau2017-02-261-16/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: hwsim: select DRIVER_11AC_SUPPORT and DRIVER_11W_SUPPORTYousong Zhou2017-02-241-1/+1
| | | | | | | | This is required for default wireless configuration of malta target to work out of the box again. Fixes "77ece30e: hostapd: Add ability to specify that that wireless driver supports 802.11ac" Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* mac80211: disable potentially harmful PS software retry for A-MPDU sessionsFelix Fietkau2017-02-231-0/+28
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: split kmod packageJoseph C. Lehner2017-02-231-13/+49
| | | | | | | | | | | | | | | | This patch splits `kmod-mt76` into three separate packages: `kmod-mt76-core`, `kmod-mt76x2` and `kmod-mt7603`. By making `kmod-mt76` a metapackage containing these new packages, the previous behaviour of including all drivers and firmware is left unchanged, unless explicitly unselected in `DEVICE_PACKAGES`. This splitting is especially beneficial for devices with small flash chips, since the `kmod-mt76` package currently requires ~160K on squashfs (after compression). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
* mac80211: rename patch to avoid duplicate numberFelix Fietkau2017-02-221-0/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add Chinese codepagesHsing-Wang Liao2017-02-201-0/+32
| | | | Signed-off-by: Hsing-Wang Liao <kuoruan@gmail.com>
* package/om-watchdog: add OpenMesh A40 supportSven Eckelmann2017-02-141-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/om-watchdog: add OpenMesh A60 supportSven Eckelmann2017-02-141-1/+2
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 18:15:32 +0000