aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* mt76: update to the latest versionFelix Fietkau2021-04-071-3/+3
| | | | | | | | | | | | | | 7d35b7a15d1d mt76: mt7915: add wifi subsystem reset 04122c89749d mt76: fix rx amsdu subframe processing 5e764ec9bece mt76: mt7921: introduce MT_WFDMA_DUMMY_CR definition cf0badbc0497 mt76: mt7921: fix inappropriate WoW setup with the missing ARP informaiton f32a4e15f5b2 mt76: mt7921: fix the dwell time control 54f52771a04a mt76: mt7921: fix kernel crash when the firmware fails to download 97189d2a045b mt76: mt7921: fix the insmod hangs dcdbd7c89cf5 mt76: mt7921: fix MT_PCIE_MAC_INT_ENABLE access 813db729c02f mt76: mt7921: reduce the data latency during hw scan Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-04-041-3/+3
| | | | | | | | | | | | | | | | 465dda65ee84 mt7615,mt7915: replace fw log 0-terminating code with wiphy info length limit 62b13f5352b8 mt76: mt7921: fix key set/delete issue 0ff3a336a8d8 mt7615,mt7915: fix a compiler warning 113ba8a81d54 mt76: mt7615: remove redundant dev_err call in mt7622_wmac_probe() be1ab3b9ae7c mt76: mt7921: fix typo in mt7921_pci_resume 4e22f0dc934b mt76: mt7915: fix txpower init for TSSI off chips e66a0b9b8d66 mt76: mt7615: always wake the device in mt7615_remove_interface 38f656768a90 mt76: mt7921: always wake the device in mt7921_remove_interface 6ee4770de083 mt76: mt7921: rework mt7921_mcu_debug_msg_event routine e578b4b8d56a mt76: mt7615: fix .add_beacon_offload() f8c6c7cbf10f mt76: mt7915: fix mt7915_mcu_add_beacon Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: enable G.INP retransmission countersJeroen Peelaerts2021-04-031-1/+3
| | | | | | | | | | | | | | | | This commit adds monitoring for a couple of DSL line features that are present in the lantiq firmware blobs. * G.INP ON/OFF * Trellis encoding ON/OFF * Virtaul Noise ON/OFF * Bitswap ON/OFF Difference in size for ltq-vdsl-app = 1k Difference in size for kmod-ltq-vdsl-vr9 < 1k Reviewed-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jeroen Peelaerts <jeroen.peelaerts@gmail.com>
* mac80211: merge a few pending tx related fixesFelix Fietkau2021-03-283-0/+142
| | | | | | Improve performance and fix potential mgmt tx hangs/warnings Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-03-261-3/+3
| | | | | | | | | | | | | | | | | | | | | 6886b57a1534 mt76: connac: introcuce mt76_sta_cmd_info data structure e529e8afe22a mt76: mt7921: properly configure rcpi adding a sta to the fw e4d522776804 mt76: mt7921: fix airtime reporting be2f67e8d3cb mt76: mt7915: fix key set/delete issue 09a1befde4b7 mt76: fix potential DMA mapping leak f66f8f41d47b mt76: mt7915: refresh repeater entry MAC address when setting BSSID 035e2f6f1ddf mt76: mt7921: get rid of mt7921_mac_wtbl_lmac_addr ee29cd5f3a6a mt76: mt7615: only enable DFS test knobs for mt7615 9a98b1a6f9c2 mt76: mt7615: cleanup mcu tx queue in mt7615_dma_reset() 3bd285424e7b mt76: mt7622: trigger hif interrupt for system reset bf6d9ee4acd1 mt76: mt7615: keep mcu_add_bss_info enabled till interface removal 115b74282314 mt76: mt7915: keep mcu_add_bss_info enabled till interface removal 57432e701d1a mt76: mt7915: cleanup mcu tx queue in mt7915_dma_reset() a519c49a6a42 mt76: mt7615: 0-terminate firmware log messages 4a22f2ffae2e mt76: mt7915: 0-terminate firmware log messages b8609066893a mt76: mt7615: fix chip reset on MT7622 and MT7663e Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mwlwifi: add PKG_FLAGS:=nonsharedDaniel Golle2021-03-241-0/+1
| | | | | | | This should fix the problem of mwlwifi-firmware-* not being found when using the ImageBuilder. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* packages: kernel: add gpio-nxp-74hc153Mauri Sandberg2021-03-223-0/+327
| | | | | | | | | | | | | | | | | | | | NXP 74HC153 is a GPIO expander. Its original source cide sits in ar71xx architecture tree. It has been slightly modified to get GPIO pin configuration from the device tree rather than a MACH file. Changes to the source file: - Remove struct nxp_74hc153_config - in nxp_74hc153_probe(), fetch GPIO configuration from device tree - allow GPIO framework decide the base number by passing -1 to it - remove support for kernel versions below 4.5.0 - add OF device compatibility string Create a package for inclusion in image. References: https://lore.kernel.org/linux-gpio/545111184.50061.1615922388276@ichabod.co-bxl/ Signed-off-by: Mauri Sandberg <sandberg@mailfence.com> [added link to driver usptreaming work in progress] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: robustify dependencies in kmod-sound-hda-coreTony Ambardar2021-03-201-4/+1
| | | | | | | | | | | | | Dependency tracking for kmod-sound-hda-core is fragile. Enabling some sound codecs (Realtek, Conexant, Sigmatel) implicitly adds a kmod-ledtrig-audio dependency, while an enabled kmod-ledtrig-audio can be picked up through enabling others (e.g. kmod-sound-hda-intel), and the behaviour can change across kernel versions. As kmod-ledtrig-audio is under 2KB, make it an unconditional dependency. Fixes: a374b8f19051 ("kernel: 5.10: update sound modules") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: add exfat againRosen Penev2021-03-191-0/+20
| | | | | | | | | | | | With kernel 5.10, exfat is out of staging and in tree. Added small hack to make it work with kernel 5.4 as well. Added removed config options for 5.4 to generic config. Signed-off-by: Rosen Penev <rosenp@gmail.com> [Set CONFIG_EXFAT_ config options to default values] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* package/exfat: removeRosen Penev2021-03-191-46/+0
| | | | | | Now that kernel 5.10 is in tree, this can be removed. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel/modules: relocate teql hotplug from iproute2 to kmod-schedTony Ambardar2021-03-192-0/+30
| | | | | | | | | | | | | | The link equalizer sch_teql.ko of package kmod-sched relies on a hotplug script historically included in iproute2's tc package. In previous discussion [1], consensus was the hotplug script is best located together with the module in kmod-sched, but this change was deferred at the time. Relocate the hotplug script now. This change also simplifies adding a tc variant for minimal size with reduced functionality. [1] https://github.com/openwrt/openwrt/pull/1627#issuecomment-447923636 Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: 5.10: update sound modulesTony Ambardar2021-03-191-1/+6
| | | | | | | | Update file paths for kmod-sound-hda-intel and reflect new dependency of kmod-sound-hda-core on kmod-ledtrig-audio. Reported-by: Javier Marcet <javier@marcet.info> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: add kmod-ledtrig-audioTony Ambardar2021-03-191-0/+15
| | | | | | This allows LEDs to be controlled by audio drivers. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: 5.10: add missing dependency in kmod-mdio-devresTony Ambardar2021-03-191-1/+1
| | | | | | | | | | | | Add conditional dependency on kmod-of-mdio due to mdio_devres.c code: #if IS_ENABLED(CONFIG_OF_MDIO) ... EXPORT_SYMBOL(devm_of_mdiobus_register); #endif /* CONFIG_OF_MDIO */ Fixes: 95a3741d17 ("kernel: support new mdio_devres.ko module in 5.10") Reported-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: 5.10: update kmod-usb-net-smsc95xxTony Ambardar2021-03-191-0/+1
| | | | | | | Add kmod-libphy dependency. Signed-off-by: Javier Marcet <javier@marcet.info> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* mac80211: rtl: update RTL8821AE PHY/RF parametersRui Salvaterra2021-03-192-0/+819
| | | | | | | | | Create a new directory for Realtek patches and backport the updated PHY and RF parameters patch. Improves the connectivity in the 5 GHz band [1]. [1] https://patchwork.kernel.org/project/linux-wireless/patch/20210219052607.7323-1-pkshih@realtek.com/#23988567 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* build: use -nostdinc and -isystem in NOSTDINC_FLAGS for out-of-tree kernel ↵Felix Fietkau2021-03-184-4/+8
| | | | | | | | modules This resolves issues uncovered by musl updates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-03-181-3/+3
| | | | | | | | 0b6c9a043f78 mt76: move de-amsdu buffer per-phy 48a905e23791 mt76: mt7615: fix CSA event format fbef8bba038f mt76: mt7921: remove duplicated macros in mcu.h Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-03-151-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 6a3cf95733e2 mt76: fix tx skb error handling in mt76_dma_tx_queue_skb ab9045153343 mt76: mt7915: only modify tx buffer list after allocating tx token id 7e1eff676257 mt76: mt7915: fix unused 'mode' variable 8a2e22fcbf69 mt76: mt7921: fix suspend/resume sequence 27a54e8b687f mt76: mt7921: fix memory leak in mt7921_coredump_work c267322f0bdb mt76: mt7921: switch to new api for hardware beacon filter [v2 update] fd2c59d9ba46 mt76: mt7921: fixup rx bitrate statistics [v2 update] bfa8d5a6a9a1 mt76: adjust to upstream API for enabling threaded NAPI 1706fb6c48e8 mt76: mt7663s: fix rx buffer refcounting c5aca6692c41 mt76: mt7615: enable hw rx-amsdu de-aggregation 9002b0b30aed mt76: mt7615: add rx checksum offload support 8e3f5bfe74f6 mt76: mt7615: add support for rx decapsulation offload 8e3bba8bd3ef mt76: mt7615: fix memory leak in mt7615_coredump_work 760adce29100 mt76: mt7921: fix aggr length histogram 84229a51845a mt76: mt7915: fix aggr len debugfs node 10a95da23cb7 mt76: mt7921: remove unneeded semicolon 2856dc8fb57e mt76: mt7921: fix stats register definitions 1b245e57549d mt76: mt7615: fix TSF configuration 1a2e2965b62b mt76: mt7615: remove hdr->fw_ver check f60ec1b9473d mt76: mt7615: fix mib stats counter reporting to mac80211 8a5b036af48f mt76: mt7915: fix mib stats counter reporting to mac80211 ee6dbcc64f6d mt76: connac: fix kernel warning adding monitor interface e46dd240ce72 mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list ddf95ead3bb3 mt76: mt7921: get rid of mt7921_sta_rc_update routine fd2a51ea9dc8 mt76: mt7921: fix the base of PCIe interrupt 28f53d074bb0 mt76: mt7921: fix the base of the dynamic remap 8d737632b57f mt76: mt7921: check mcu returned values in mt7921_start 5ff25c915e62 mt76: mt7915: add missing capabilities for DBDC 58dd3f26c099 mt76: mt7615: fix CSA notification for DBDC 76f4959107ac mt76: mt7615: stop ext_phy queue when mac reset happens 7de0a0654054 mt76: mt7915: fix CSA notification for DBDC e9e418fc7eb0 mt76: mt7915: stop ext_phy queue when mac reset happens 477b78301879 mt76: mt7915: fix PHY mode for DBDC 37b4dc0f7595 mt76: mt76x0u: Add support for TP-Link T2UHP(UN) v1 29a04583aecb mt76: mt7915: fix rxrate reporting a4307e6ba054 mt76: mt7915: fix txrate reporting 256f324f8fcd mt76: mt7915: check mcu returned values in mt7915_ops 638b112188a5 mt76: mt7615: check mcu returned values in mt7615_ops 975cccfa96da mt76: mt7663: fix when beacon filter is being applied aafe972e95b2 mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation 0d5b1a702715 mt76: mt7663s: fix the possible device hang in high traffic 00628061b546 mt76: mt7615: add missing capabilities for DBDC 2303e1844afd mt76: mt7915: fix possible deadlock while mt7915_register_ext_phy() 6e2b9d258306 mt76: mt7921: reduce mcu timeouts for suspend, offload and hif_ctrl msg 3cf5afc02955 mt76: introduce mcu_reset function pointer in mt76_mcu_ops structure 9af9622df549 mt76: mt7921: introduce mt7921_run_firmware utility routine. e12c44a7e165 mt76: mt7921: introduce __mt7921_start utility routine 7b56d5bf6ea0 mt76: dma: introduce mt76_dma_queue_reset routine a80e50098b51 mt76: dma: export mt76_dma_rx_cleanup routine e0708e296e27 mt76: mt7921: add wifi reset support 87e09e8482cf mt76: mt7921: remove leftovers from dbdc configuration cc933b3669f7 mt76: mt7921: remove redundant check on type ca22cc221ae7 linux-firmware: add firmware for MT7921 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport upstream patches for driver disconnectFelix Fietkau2021-03-155-13/+585
| | | | | | Needed for an mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: support new mdio_devres.ko module in 5.10Tony Ambardar2021-03-141-3/+21
| | | | | | | | | Add kmod-mdio-devres package and kernel config symbol, and update related kmod-r8169 and kmod-ixgbe package dependencies. Build tested module dependencies on x86/64 with CONFIG_ALL_KMODS=y. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* treewide: make AddDepends/usb-serial selectiveAdrian Schmutzler2021-03-061-1/+1
| | | | | | | Make packages depending on usb-serial selective, so we do not have to add kmod-usb-serial manually for every device. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: fix kmod-usb3 on platforms without PCIDaniel Golle2021-03-061-3/+6
| | | | | | | | | | | | | Partially restore the wild-card matching for kmod-usb3 modules to fix build on platforms without PCI which otherwise file, as seen on buildbot: ERROR: module '[...]/linux-5.4.102/drivers/usb/host/xhci-pci.ko' is missing. modules/usb.mk:1675: recipe for target '[...]/kmod-usb3_5.4.102-1_mips_mips32.ipk' failed Fixes: 7bda2e9aba ("kernel: fix kmod-usb3 dependencies") Fixes: be23f9818a ("apm821xx: add support for kernel 5.10") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: fix kmod-usb3 dependenciesIlya Lipnitskiy2021-03-061-20/+62
| | | | | | | | | | | | | | | | | | Adding CONFIG_USB_XHCI_PCI_RENESAS to KCONFIG made it so it was set for all targets that included kmod-usb3, not just the intended apm821xx/nand. xhci-pci has a dependency on xhci-pci-renesas if CONFIG_USB_XHCI_PCI_RENESAS is set, breaking kmod-usb3 builds on Linux 5.10 on all other targets. Rework the dependencies by breaking out xhci-hcd, xhci-mtk, and xhci-pci-renesas into new hidden kernel modules and setting kmod-usb3 dependencies properly. Tested by building mt7621 and apm821xx/nand with kmod-usb3 on Linux 5.10 Fixes: be23f981 ("apm821xx: add support for kernel 5.10") Cc: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* apm821xx: add support for kernel 5.10 for testingChristian Lamparter2021-03-051-0/+6
| | | | | | | | | | | | This patch copies over refreshed patches from 5.4. - dropped crypto patches (they got upstreamed) - dropped renesas USB 3 firmware loader (they got upstreamed) - NAND now needs extra device-properties for ECC settings. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* bcm63xx-cfe: update to the latest masterRafał Miłecki2021-03-051-3/+3
| | | | | | d035016 tp-link: rename to tplink to match DT vendor prefix Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel/modules: fix CDC NCM dependenciesRui Salvaterra2021-03-051-1/+1
| | | | | | CDC NCM support only depends on CDC Ethernet with Linux 5.10. Fix thusly. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* bcm63xx-cfe: update to the latest masterRafał Miłecki2021-03-051-3/+3
| | | | | | | 3fb6f1c tp-link: c2300-v1: add cferam file 79f9578 sercomm: vox-2.5: add cferam file Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* treewide: fix spelling 'seperate' -> 'separate'Daniel Golle2021-02-281-2/+2
| | | | | | | This popular spelling mistake was also introduced by myself lately. Fix it everywhere. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel/zram: remove obsolete symbolRui Salvaterra2021-03-011-1/+0
| | | | | | | | | Zsmalloc page table mappings are dead and gone [1]. Drop the respective kconfig symbol. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.4.y&id=69dc72f058c9b98f9b66bed184cfab7c2e9f49b0 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* lantiq: ltq-tapi: disable KPI and QOSMathias Kresin2021-03-011-2/+2
| | | | | | | | | | The QOS feature depends on KPI2UDP which was removed from the tree with commit a95775e4b2a9 ("drop unmaintained packages") in 2012. Since QOS was the last user of the KPI, the feature can be disabled by default. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-vdsl-app: fix -Wundef warningsMathias Kresin2021-03-011-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | The following warnings are shown during build: /usr/include/vdsl/cmv_message_format.h:33:6: warning: "MEI_SUPPORT_DEBUG_STREAMS" is not defined, evaluates to 0 [-Wundef] #if (MEI_SUPPORT_DEBUG_STREAMS == 1) ^~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/vdsl/drv_mei_cpe_interface.h:2256:6: warning: "MEI_SUPPORT_OPTIMIZED_FW_DL" is not defined, evaluates to 0 [-Wundef] #if (MEI_SUPPORT_OPTIMIZED_FW_DL == 1) ^~~~~~~~~~~~~~~~~~~~~~~~~~~ The headers are provided by the MEI driver, but the defines are never set by the vdsl app. While the struct with the MEI_SUPPORT_OPTIMIZED_FW_DL conditional isn't used by the vdsl app, however CMV_USED_PAYLOAD_8BIT_SIZE which value depends on MEI_SUPPORT_DEBUG_STREAMS is. Since the MEI driver doesn't provide an autogenerated header with compile flags, the flags are hardcoded for the vdsl app. Set them for the MEI driver as well, to indicate a relation to the values used for the vdsl app and to be not surprised by a changed default in case the MEI driver gets updated. Use the current default values defined in the MEI driver. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: no chacha-mips.ko on mips32 r1 targetsIlya Lipnitskiy2021-02-271-2/+5
| | | | | | | | | | | | | CHACHA_MIPS depends on CPU_MIPS32_R2. Therefore, kmod-crypto-lib-chacha20 should not contain chacha-mips.ko on MIPS32 R1 targets. Enforce that in the target-specific definition. Fixes bcm47xx, bcm63xx, lantiq/ase, ath25 builds. Fixes: 06351f1 ("kernel: migrate wireguard into the kernel tree") Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
* kernel: fix kmod-wireguard package fieldsIlya Lipnitskiy2021-02-261-4/+2
| | | | | | | | | Use NETWORK_SUPPORT_MENU like all other modules in netsupport.mk. Drop SECTION and CATEGORY fields as they are set by default and to match other packages in netsupport.mk. Use better TITLE for kmod-wireguard (taken from upstream drivers/net/Kconfig). Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* kernel: migrate wireguard into the kernel treeIlya Lipnitskiy2021-02-262-1/+181
| | | | | | | | | | On Linux 5.4, build WireGuard from backports. Linux 5.10 contains wireguard in-tree. Add in-kernel crypto libraries required by WireGuard along with arch-specific optimizations. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* rtl8812au-ct: fix PKG_MIRROR_HASHDavid Bauer2021-02-241-1/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: 5.10: fix kmod build failuresIlya Lipnitskiy2021-02-236-16/+44
| | | | | | | | | | Modify existing modules to reflect their new location in Linux 5.10. Add missing dependenices. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> [enable CRYPTO_USER_API_ENABLE_OBSOLETE; add kmod-crypto-hash dependency to usb-net-rtl8152] Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: 5.10: fix rtl8812au-ct buildIlya Lipnitskiy2021-02-232-16/+9
| | | | | | | | Pull in upstream: https://github.com/greearb/rtl8812AU_8821AU_linux/commit/c8d243936fed0c5fe1d77a06b36d26f41c8c46f4 https://github.com/greearb/rtl8812AU_8821AU_linux/commit/1e9689c89fa627d2d764ba0e8359fd444fe8458f Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* bcm63xx-cferam: select for bmips targetÁlvaro Fernández Rojas2021-02-221-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* x86: add led driver for PC Engines APU1Andreas Eberlein2021-02-201-0/+16
| | | | | | | | | This driver adds the LED support for the PC Engines APU1. This integrates the Linux kernel driver and includes a patch to support newer firmware versions. Also the default LED configuration is updated to use the correct devices. Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de>
* bcm27xx-gpu-fw: update to latest versionÁlvaro Fernández Rojas2021-02-181-15/+15
| | | | | | This is needed to add support for CM4 and RPI 400. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: lantiq: fix Module.symvers handlingMathias Kresin2021-02-188-2/+16
| | | | | | | | | | | | | | | If an external module uses exported symbols from another external module, Kbuild needs to have full knowledge of all symbols to avoid spitting out warnings about undefined symbols. Use PKG_EXTMOD_SUBDIRS to point to the build directory which contains the Module.symvers. Pass KERNEL_MAKE_FLAGS to the external module build, to inject KBUILD_EXTRA_SYMBOLS. KBUILD_EXTRA_SYMBOLS holds a space separated list of Module.symvers, which list all exported symbols. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: add linux 5.10 supportFelix Fietkau2021-02-165-10/+20
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: switch to 5.10Álvaro Fernández Rojas2021-02-167-103/+79
| | | | | | | Let's switch to 5.10 now that mac80211 has been updated. Runtime-tested on ipq806x (Netgear R7800). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mac80211: Update to version 5.10.16-1Hauke Mehrtens2021-02-1512-185/+19
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Refresh patches againHauke Mehrtens2021-02-1514-110/+124
| | | | | | | A wrong quilt configuration was used last time. Fixes: ed1e234d87fc ("mac80211: refresh patches") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath9k: fix transmitting to stations in dynamic SMPS modeFelix Fietkau2021-02-141-0/+49
| | | | | | | | | | When transmitting to a receiver in dynamic SMPS mode, all transmissions that use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to give the receiver's extra chains some time to wake up. This fixes the tx rate getting stuck at <= MCS7 for some clients, especially Intel ones, which make aggressive use of SMPS. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-02-142-86/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 261d184cebdc mt76: introduce mt76_vif data structure 50349a8664ef mt76: mt76_connac: create mcu library c88859180c51 mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu module 9856236ab4f9 mt76: mt76_connac: move WoW and suspend code in mt76_connac_mcu module 2da59aacdd50 mt76: mt76_connac: move pm data struct in mt76_connac.h 16be142e40fe mt76: mt76_connac: move pm utility routines in mt76_connac_lib module c4ccfc66347d mt76: mt7921: add MAC support 8ecf3a50e7ad mt76: mt7921: add MCU support 92c1717f9a55 mt76: mt7921: add DMA support 1cecf9c3da8b mt76: mt7921: add EEPROM support a9e68410b9ba mt76: mt7921: add ieee80211_ops 39d6f4851b06 mt76: mt7921: introduce mt7921e support 9f37baecf5d6 mt76: mt7921: add debugfs support b16cf6e26998 mt76: mt7921: introduce schedule scan support 5aa798ee56c7 mt76: mt7921: introduce 802.11 PS support in sta mode e67d5216f16d mt76: mt7921: introduce support for hardware beacon filter cb99bf4655f9 mt76: mt7921: introduce beacon_loss mcu event 71f9f09ee987 mt76: mt7921: introduce PM support 2beb9c9530d4 mt76: mt7921: rely on mt76_connac_mcu common library 59e682497d12 mt76: mt7921: rely on mt76_connac_mcu module for sched_scan and hw_scan 1ccf6a9c60cd mt76: mt7921: rely on mt76_connac_mcu module for suspend and WoW support f8d1ec5e6e11 mt76: mt7921: introduce Runtime PM support 633a1cbd8f4e mt76: mt7921: introduce regdomain notifier support 0d95c6ad1745 mt76: mt7921: enable MSI interrupts 5f4f6792fb37 mt76: mt7921: add coredump support 47eb00e13450 mt76: mt7663: introduce coredump support 26658849a465 mt76: mt7615: fix key set/delete issues b0ba039bc2ef mt76: mt7615: fix tx skb dma unmap 892f74d37e88 mt76: mt7915: fix tx skb dma unmap 2659f6c6ea23 mt76: mt7615: support loading EEPROM for MT7613BE b09cc8644529 mt76: dma: do not report truncated frames to mac80211 ae6473f1d2af mt76: mt7921: enable random mac addr during scanning b59e3677476d mt76: mt7921: remove unnecessary variable 781911f167aa mt76: mt7921: removed unused definitions in mcu.h 994893d38d51 mt76: always use WTBL_MAX_SIZE for tlv allocation e6c0948ada07 mt76: mt76x0: disable GTK offloading a75302bcbfe1 mt76: connac: always check return value from mt76_connac_mcu_alloc_wtbl_req 8da10d6f9251 mt76: mt7915: always check return value from mt7915_mcu_alloc_wtbl_req 80a87412e9e9 mt76: mt7915: fix uninitialized variable in mt7915_tm_set_tx_cont() c7d98fc35865 mt76: use PCI_VENDOR_ID_MEDIATEK to avoid open coded b5228e75e422 mt76: mt7921: switch to new api for hardware beacon filter 73fce2cbfa41 mt76: connac: fix up the setting for ht40 mode in mt76_connac_mcu_uni_add_bss 2e2cb71901e8 mt76: mt7921: fixup rx bitrate statistics 2d7b1d72b43b mt76: mt7921: add flush operation 96b4c9874e16 mt76: mt7921: fix uninitialized pointer access in mt7921_get_wtbl_info 4492d801cbb5 mt76: connac: update sched_scan cmd usage 200c1b1c234b mac80211: rename csa counters to countdown counters 0d7564d0d899 mt76: add support for 802.3 rx frames 4c0811c647b9 mt76: mt7915: enable hw rx-amsdu de-aggregation 4b7a68634ff6 mt76: mt7915: add rx checksum offload support 289cd7804587 mt76: mt7915: add support for rx decapsulation offload Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix a regression in processing rx statsFelix Fietkau2021-02-141-0/+28
| | | | | | | A logic error caused rx rate update to be missed for any driver not using fast-rx Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: refresh patchesFelix Fietkau2021-02-1412-102/+92
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>