aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-sunxi
Commit message (Collapse)AuthorAgeFilesLines
* sunxi: add support for Banana Pi M2 BerryZoltan HERPAI2021-04-121-0/+7
| | | | | | | | | | | | | | | | | | CPU: Allwinner V40 quad-core Cortex A7 @ 1.2GHz Memory: 1GB DDR3 Storage: SDcard, native SATA Network: 10/100/1000M ethernet, Ampak AP6212 wifi + BT USB: 4x USB 2.0 Installation: Use the standard sunxi installation to an SD-card. While the board is very similar to the M2 Ultra board (the V40 is the automotive version of the R40), as both the u-boot and kernel supports them separately, and some pins are different, let's add a separate device spec. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sunxi: add support for H6 boards and OrangePiOnePlusZoltan HERPAI2021-04-112-0/+17
| | | | | | | | | | | | | | | | | | | | Specifications: SoC Allwinner H6 @ 1.8 Ghz DRAM 1Gb LPDDR3 Power DC 5V @ 3A Video HDMI (Type 2.0A - full) Audio HDMI, on-board microphone Network 10/100/1000Mbps Ethernet (Realtek RTL8211) Storage microSD USB 1 USB2.0 Host, 1 USB2.0 OTG Debug Serial UART Flashing instructions: Standard sunxi SD card installation procedure - copy image to SD card, insert into SD card slot on the device and boot. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* arm-trusted-firmware-sunxi: move to use the common tf-a build code and bump ↵Zoltan HERPAI2021-04-111-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | to latest version Create a -a64 package for now. Moving to the latest ATF was tested on a SoPine A64 board. U-Boot SPL 2020.04 (Feb 19 2021 - 11:28:19 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.4(release):reboot-15854-g42b39a13d2 NOTICE: BL31: Built : 22:45:53, Feb 22 2021 NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) NOTICE: BL31: Found U-Boot DTB at 0x4090a28, model: SoPine with baseboard NOTICE: PSCI: System suspend is unavailable U-Boot 2020.04 (Feb 19 2021 - 11:28:19 +0000) Allwinner Technology CPU: Allwinner A64 (SUN50I) Model: SoPine with baseboard DRAM: 2 GiB Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: add ATF variable for specifying which flavour to useZoltan HERPAI2021-04-111-1/+10
| | | | | | | In preparation for H6 support (which requires a separate ATF blob), add an envvar to the A64 boards specifying which ATF blob to use. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: add missing type __u64Georgi Valkov2021-03-011-0/+10
| | | | | | | | | | | | | | | Non Linux systems e.g. macOS lack the __u64 type and produce build errors: In file included from tools/aisimage.c:9: In file included from include/image.h:19: In file included from ./arch/arm/include/asm/byteorder.h:29: In file included from include/linux/byteorder/little_endian.h:13: include/linux/types.h:146:9: error: unknown type name '__u64'; did you mean '__s64'? typedef __u64 __bitwise __le64; Resolved by declaring __u64 in include/linux/types.h Build tested on macOS and Ubuntu. Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
* sunxi: add support for linksprite pcDuino3 nano boardJiang Yongquan2021-01-271-0/+7
| | | | | | | | | | | | | | | | | | Specifications: - SoC: Allwinner A20 @ 1Ghz - DRAM: 1GiB DDR3 @ 408MHz (K4B4G1646Q-HYK0) - NAND: 4GB MLC NAND (H27UBG8T2BTR-BC) - Ethernet: 10/100/1000Mbps Ethernet (Realtek RTL8211E) Flash instructions: dd if=openwrt-sunxi-cortexa7-linksprite_pcduino3-nano-ext4-sdcard.img of=/dev/sdX Signed-off-by: Jiang Yongquan <woxwchc@foxmail.com> [Remove CONFIG_REALTEK_PHY from sunxi/cortexa53 config] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add support for Libre Computer ALL-H3-CC H5Roman Kuzmitskii2020-11-121-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - CPU: Allwinner H5, Quad-core Cortex-A53 Up to 1GHz - DDR3 RAM: 2GB - Network: 10/100M Ethernet x 1 - IR: x1 (Receive) - USB (Host) Type-A x3 - USB (OTG) Type-A x1 - MicroSD Slot x 1 - eMMC Slot x1 - MicroUSB power input - GPIO 40pin header - UART 3pin header - Leds: - librecomputer:blue:status - librecomputer:green:pwr - Buttons: - uboot button (used to enter fel mode) - power button (can trigger power on) - Power Supply via MicroUSB or GPIO 5V/2A Installation: - Write the image to SD Card with dd - Boot from the SD Card Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com> [Fixed Signed-off-by] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: Adapt U-Boot config to board renameHauke Mehrtens2020-10-181-1/+1
| | | | | | | | The board was renamed without changing the BUILD_DEVICES in the U-Boot Makefile, this broken the build. Fixes: 0830ae3a2fdf ("sunxi: Correct manufacturer name to Sinovoip") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add support for FriendlyARM NanoPi R1Jayantajit Gogoi2020-10-182-0/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz - DDR3 RAM: 512MB/1GB - Network: 10/100/1000M Ethernet x 1， 10/100M Ethernet x 1 - WiFi: 802.11b/g/n, with SMA antenna interface - USB Host: Type-A x2 - MicroSD Slot x 1 - MicroUSB: for OTG and power input - Debug Serial Port: 3Pin 2.54mm pitch pin-header - LED: nanopi:red:status nanopi:green:wan nanopi:green:lan - KEY: reset - Power Supply: DC 5V/2A Installation: - Write the image to SD Card with dd - Boot NanoPi from the SD Card Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
* sunxi: add support for FriendlyArm ZeropiArturas Moskvinas2020-10-113-0/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | Specification CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz DDR3 RAM: 256MB/512MB Connectivity: 10/100/1000Mbps Ethernet USB Host: Type-A x 1 MicroSD Slot x 1 MicroUSB: for power input only Debug Serial Port: 4Pin, 2.54 mm pitch pin header Power Supply: DC 5V/2A PCB Dimension: 40 x 40 x 1.2mm Installation: Burn the image file to an SD Card with dd or any image burning tool Boot ZeroPi from the SD Card The following features are working and tested: Ethernet port 10/100/1000M Ethernet Remarks: SBC is mostly compatible and boots with FriendlyARM NanoPI M1 plus DTS also (zeropi has no working hdmi) Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
* uboot-sunxi: bump to 2020.04 relasePetr Štetiar2020-04-179-43/+14
| | | | | | | | | | | Refreshed patches, removed upstreamed patch: 260-configs-a64-olinuxino-emmc-add-eMMC-boot-part-config.patch Boot tested on a64-olinuxino-emmc. Cc: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-sunxi: a64: allow booting directly from eMMCPetr Štetiar2020-03-281-3/+5
| | | | | | | | | Current boot script uses hardcoded bootdevice, which allows booting from SD card only, so this patch allows booting directly from eMMC as well. While at it, replace fixed root device with more flexible UUID based probing, so from now on probing order of MMC device doesn't matter. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-sunxi: add support for Olimex A64-Olinuxino eMMCPetr Štetiar2020-03-282-0/+38
| | | | | | | Adding U-Boot image for Olimex A64-Olinuxino eMMC, including patch which adds eMMC boot partition configuration commands. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-sunxi: add support for Olimex A64-OlinuxinoPetr Štetiar2020-03-281-0/+9
| | | | | | Adding U-Boot image for Olimex A64-Olinuxino. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-sunxi: rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3Petr Štetiar2020-03-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | Rename the board as done in upstream commit 268ae6548779 ("sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3") which backs the rename with the following reasoning: The brand Sinovoip is used for Sinovoip's original VOIP products, while the Bananapi brand is for the single board computers they produce. This has been verified by Bananapi. Rename the board from "Sinovoip BPI M2 Plus" to "Bananapi M2 Plus". For the defconfig file, all lowercase is used. To support the H5 variant of this board, the "H3" suffix is added to the defconfig name. This has to be done in order to allow building U-Boot past v2019.04 release where this change was introduced. Ref: https://github.com/openwrt/openwrt/pull/2849#discussion_r396401489 Suggested-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-sunxi: Banana Pi M2 Ultra switch to mainline defconfigAleksander Jan Bajkowski2020-03-282-27/+2
| | | | | | U-boot also have defconfig for this board. In 2019.01 branch they are identical. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* uboot-sunxi: bump to 2020.01Petr Štetiar2020-03-2813-103/+23
| | | | | | | | | Refreshed patches, removed following, probably obsolete patches: 221-compatible-old-dtc.patch 240-sun50i-h5-Orange-Pi-Zero-Plus-Fix-SdCard-detection.patch Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: add support for FriendlyARM Nano PI NEO Air dev boardRoman Bazalevsky2019-12-131-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware: Allwinner H3 upto 1.2GHz 512MB DDR3 RAM 8GB on-board eMMC - mountable, can be used as boot with custom boot.scr microSD-card slot WiFi 802.11n (AP6212A) - working Bluetooth (AP6212A) - not working for now Micro-USB OTG + 2*USB headers UART 3.3V - working GPIO/I2C/SPI 2.54mm headers Standard sunxi SD-card installation procedure - copy image to SD card, insert in into slot and boot. First time you will need UART adapter to enable on-board wireless (or just build custom image with enabled WiFi). To boot from eMMC: - boot from SD - copy SD image to emmc (dd bs=... if=.... of=/dev/mmcblk2) - mount eMMC boot partition and replace boot script on it - unmount, reboot To use i2c, spi and more uarts - replace dtb on boot partition with fixed one (use dtc or fdt-tools). Signed-off-by: Roman Bazalevsky <rvb@rvb.name> [rebase onto device name consolidation patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* sunxi: use vendor_device scheme for device definitionsAdrian Schmutzler2019-12-131-34/+34
| | | | | | | | | | | | This changes device definition to resemble the vendor_device scheme already present for the majority of device compatible strings. By doing this, we achieve several advantages at once: - Image names and node names are more consistent with other targets. - SUPPORTED_DEVICES can be set automatically for all but two cases. - Image names and node names are in line with DEVICE_TITLEs. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* sunxi: Add support for Banana Pi M2 UltraHal Martin2019-09-212-0/+32
| | | | | | | | | | | | | | | | | | CPU: Allwinner R40 Quad-Core Cortex-A7 @ 1.2GHz GPU: Mali 400 MP2 Memory: 2GB DDR3 onboard (shared with GPU) Onboard: Storage microSD card slot Onboard: Storage 8GB eMMC Onboard: Network 10/100/1000M Ethernet RJ45 Onboard: Network WiFi 802.11b/g/n 1x1 (AMPAK AP6212; brcmfmac) Onboard header: SPI, I2C, GPIO, UART USB: Two USB 2.0 Host, One USB 2.0 OTG Known issues: - WiFi doesn't work - eMMC not supported Signed-off-by: Hal Martin <hal.martin@gmail.com>
* uboot-sunxi: add fix for A20-OLinuXino-Lime2-eMMC rev. K boardsZoltan HERPAI2019-03-131-0/+44
| | | | | | | The OLinuXino Lime2 rev. K boards use new PHYs (Micrel KSZ9031), so enable that. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: bump to 2019.01Zoltan HERPAI2019-03-135-9/+9
| | | | | | | | | | | | | | Tested on: Bananapro (A20) Banana Pi M3 (A83t) Linksprite pcDuino3 (A20) Olinuxino Lime (A10) Orange Pi 2 (H3) Pine64 (A64) Patches refreshed. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sunxi: add support for Orange Pi PC PlusAleksander Jan Bajkowski2019-03-091-0/+7
| | | | | | | | | | | | | | | | | CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Storage 8 GB eMMC Onboard: Network 10/100M Ethernet RJ45 Onboard: Network WiFi 802.11 b/g/n (Realtek RTL8189FTV) Onboard header: SPI, I2C, GPIO, UART USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG Known issues: -Wifi diesn't work Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* sunxi: add support for Orange Pi OneAleksander Jan Bajkowski2019-02-261-0/+7
| | | | | | | | | | | CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 512MB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard header: SPI, I2C, GPIO, UART USB 2.0: One USB 2.0 HOST, One USB 2.0 OTG Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* sunxi: add support for Sinovoip Banana Pi M2 PlusPawel Dembicki2019-02-171-0/+7
| | | | | | | | | | | | | | | | | | | CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Network 10/100M Ethernet RJ45 (Realtek RTL8211E) Onboard: Network BT4.0/WiFi 802.11 b/g/n (Ampak AP6212) Onboard header: SPI, I2C, GPIO, UART USB 2.0: Two USB 2.0 HOST, One USB 2.0 OTG Untested: Audio, Video Not working: Bluetooth Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* uboot-sunxi: Orange Pi Zero Plus: Fix SdCard detectionHauke Mehrtens2019-01-131-0/+28
| | | | | | | | | The Detection pin is at PF6 and not at PH13 like defined before. I checked the schematics and now I am am not seeing this error message any more: Loading Environment from FAT... Card did not respond to voltage select! Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: disable AXP209 on Olimex A13 OlinuxinoZoltan HERPAI2019-01-131-0/+19
| | | | | | | | | | | | | | Disable the PMIC on Olimex A13 Olinuxino, as the SPL cannot set the core voltage correctly, which causes the board to freeze later at kernel if CPU throttling is enabled (see below). This will almost certainly kill the VGA output (which requires LDO3 to be set), but this is still a better option than to disable CPU throttling for all Cortex-A8 based devices. [ 2.485632] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 384000 KHz [ 2.525698] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 432000 KHz Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: update Theobroma A31 Pangolin supportZoltan HERPAI2019-01-131-3/+1
| | | | | | Drop removed pinctrl definitions from the i2c3 pin layout. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: Update to version 2018.11Hauke Mehrtens2019-01-1312-481/+17
| | | | | | | This updates the uboot for the sunxi target to version 2018.11 The removed patches are applied upstream and not needed any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add support for Orange Pi ZeroJulian Haupt2018-10-071-0/+7
| | | | Signed-off-by: Julian Haupt <julian.haupt@hauptmedia.de>
* sunxi: build image/uboot for the NanoPi NEO2Jasper Scholte2018-09-221-0/+9
| | | | | | | | The NanoPi NEO2 is a small Allwinner H5 based board available with different DRAM configurations. This board is very similar to the NanoPi NEO PLUS2 Signed-off-by: Jasper Scholte <NightNL@outlook.com>
* sunxi: Added support for Xunlong Orange Pi PC2Antonio Silverio2018-08-091-0/+9
| | | | | | | | | | | | | | | | CPU: H5 High Performance Quad-core 64-bit Cortex-A53 GPU: Mali450 OpenGL ES 2.0/1.1/1.0, OpenVG 1.1, EGL Memory: 1GB DDR3 (shared with GPU) Onboard Storage: TF card (Max. 32GB) / NOR flash(2MB) Onboard Network: 1000M/100M Ethernet RJ45 USB 2.0 Ports: Three USB 2.0 HOST, one USB 2.0 OTG, HOST mode role by default in DTS Buttons: Power Button(SW4) Debug TTL UART: ..DC-IN.. >[GND][RX][TX] ..HDMI.. Signed-off-by: Antonio Silverio <menion@gmail.com>
* uboot-sunxi: update Orange Pi R1 and Zero PlusHauke Mehrtens2018-06-183-98/+257
| | | | | | | The device tree files are now matching the kernel 4.17 and this will be send also for integration into mainline U-Boot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: update to version 2018.05Hauke Mehrtens2018-06-1814-199/+39
| | | | | | | | | | This patch 220-add-sunxi50i-nanopi-neo-plus2.patch was merged upstream. The u-boot-sunxi-with-spl.bin is now also created for the ARM64 sunxi boards by U-Boot itself, no need to do it manually any more. This was tested on a H2+ Orange Pi R1 and a H5 Orange Pi Zero Plus. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add build for sopineFan Fan2018-03-231-0/+10
| | | | | | This will generate image for Pine64 Sopine board. Signed-off-by: Fan Fan <fkpwolf@gmail.com>
* uboot-sunxi: refresh patchesZoltan HERPAI2018-03-217-12/+12
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: fix build by adding comparabilities for old dtcHauke Mehrtens2018-03-211-0/+52
| | | | | | | | | We use the dtc from the kernel and that does not have all the options which u-boot would like to use now. make these parameters optional. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [wigyori@uid0.hu: renamed to 221-compatible-old-dtc.patch from 220-] Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: bump again to 2017.11Zoltan HERPAI2018-03-2111-392/+36
| | | | | | | | | | | | | | | Runtime-tested on: - Pine64 (A64) - Orange Pi 2 (H3) - Bananapro (A20) - Olimex A20-Micro (A20) - Pcduino v3 (A20) - Pcduino v2 (A10) Compile-tested on: - all A8/A7/A53 boards Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: add Xunlong Orange Pi PCVitalij Alshevsky2018-02-261-0/+7
| | | | Signed-off-by: Vitalij Alshevsky <v_alshevsky@tut.by>
* uboot-sunxi: Add Xunlong Orange Pi Zero PlusHauke Mehrtens2018-02-172-1/+158
| | | | | | | This is based on a patch from armbian: https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-orangepi-zeroplus.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add support for NanoPi NEO Plus2 boardAntony Antony2018-02-171-0/+9
| | | | | | | | | | | | | | arm64: allwinner: h5: NanoPi NEO Plus2 DT support Add initial DT for NanoPi NEO Plus2 by FriendlyARM - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU - 1 GB DDR3 RAM - 8GB eMMC flash (Samsung KLM8G1WEPD-B031) - micro SD card slot - Gigabit Ethernet (external RTL8211E-VB-CG chip) - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module) - 2x USB 2.0 host ports & 2x USB via headers Signed-off-by: Antony Antony <antony@phenome.org>
* uboot-sunxi: add u-boot DT for NanoPi NEO Plus2 boardAntony Antony2018-02-171-0/+165
| | | | | | u-boot upstream commit 6130b1f6bc23 Signed-off-by: Antony Antony <antony@phenome.org>
* uboot-sunxi: dts: Update orange Pi R1 integrationHauke Mehrtens2018-02-172-146/+73
| | | | | | | | This syncs the Orange Pi R1 device tree files with the one from the upstream kernel and also uses the default configuration from the Orange Pi Zero. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "uboot-sunxi: bump to 2017.11"Zoltan HERPAI2018-02-1611-36/+392
| | | | | | | | This reverts commit 805f756d6e4ff5061380baf5e262aec72abcf195. Move back to 2017.07 until we move sunxi to GCC7. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* Revert "uboot-sunxi: refresh patches"Zoltan HERPAI2018-02-166-10/+10
| | | | | | | | This reverts commit f142de5f44bcba8cb0f12e5b1fd26cd9867cf866. Revert until we can move to 2017.11 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* Revert "uboot-sunxi: fix build by adding comparabilities for old dtc"Zoltan HERPAI2018-02-161-52/+0
| | | | | | | | This reverts commit ef0416666f48e1e7793c4230cec18c8cdd3e1003. Revert until we can move to 2017.11 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: fix build by adding comparabilities for old dtcHauke Mehrtens2018-02-101-0/+52
| | | | | | | We use the dtc from the kernel and that does not have all the options which u-boot would like to use now. make these parameters optional. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: refresh patchesHauke Mehrtens2018-02-106-10/+10
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: bump to 2017.11Zoltan HERPAI2018-02-0611-392/+36
| | | | | | | | | | | | | | | Runtime-tested on: - Pine64 (A64) - Orange Pi 2 (H3) - Bananapro (A20) - Olimex A20-Micro (A20) - Pcduino v3 (A20) - Pcduino v2 (A10) Compile-tested on: - all A8/A7/A53 boards Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: fix build of HAOYU Electronics Marsboard A10Hauke Mehrtens2017-11-231-1/+2
| | | | | | | | The uboot target is named MarsBoard_A10 and it was not build at all. This fixes a build problem seen by the build bot. Fixes: 6a3565985fde ("sunxi: Added profile for HAOYU Electronics Marsboard A10") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-26 02:29:06 +0000