diff options
Diffstat (limited to 'target')
10 files changed, 132 insertions, 420 deletions
diff --git a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 272c084c99..07100b1856 100644 --- a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -2,42 +2,7 @@ [ -e /lib/firmware/$FIRMWARE ] && exit 0 -. /lib/functions.sh -. /lib/functions/system.sh - -ath9k_eeprom_die() { - echo "ath9k eeprom: " "$*" - exit 1 -} - -ath9k_eeprom_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath9k_eeprom_die "no mtd device found for partition $part" - - dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath9k_eeprom_die "failed to extract from $mtd" -} - -ath9k_ubi_eeprom_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local ubidev=$(nand_find_ubi $CI_UBIPART) - local ubi - - ubi=$(nand_find_volume $ubidev $part) - [ -n "$ubi" ] || \ - ath9k_eeprom_die "no UBI volume found for $part" - - dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath9k_eeprom_die "failed to extract from $ubi" -} +. /lib/functions/caldata.sh ath9k_patch_firmware_mac() { local mac=$1 @@ -56,14 +21,14 @@ case "$FIRMWARE" in . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 0x5000 0x1000 + caldata_extract_ubi "caldata" 0x5000 0x1000 else - ath9k_eeprom_extract "wifi_data" 0x5000 0x1000 + caldata_extract "wifi_data" 0x5000 0x1000 ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0xc) fi ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; @@ -74,14 +39,14 @@ case "$FIRMWARE" in . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 0x1000 0x1000 + caldata_extract_ubi "caldata" 0x1000 0x1000 else - ath9k_eeprom_extract "wifi_data" 0x1000 0x1000 + caldata_extract "wifi_data" 0x1000 0x1000 ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0x0) fi ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 0cdd783315..5ec13efd3f 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -2,45 +2,7 @@ [ -e /lib/firmware/$FIRMWARE ] && exit 0 -. /lib/functions.sh -. /lib/functions/system.sh - -ath9k_eeprom_die() { - echo "ath9k eeprom: " "$*" - exit 1 -} - -ath9k_eeprom_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath9k_eeprom_die "no mtd device found for partition $part" - - dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath9k_eeprom_die "failed to extract from $mtd" -} - -ath9k_eeprom_extract_reverse() { - local part=$1 - local offset=$2 - local count=$(($3)) - local mtd - local reversed - local caldata - - mtd=$(find_mtd_chardev "$part") - reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd) - - for byte in $reversed; do - caldata="\x${byte}${caldata}" - done - - printf "%b" "$caldata" > /lib/firmware/$FIRMWARE -} +. /lib/functions/caldata.sh ath9k_patch_fw_mac() { local mac=$1 @@ -83,11 +45,11 @@ case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in avm,fritz4020) - ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 + caldata_extract_reverse "urlader" 0x1541 0x440 ;; dlink,dir-825-c1|\ dlink,dir-835-a1) - ath9k_eeprom_extract "art" 0x1000 0x440 + caldata_extract "art" 0x1000 0x440 ath9k_patch_fw_mac $(mtd_get_mac_text "mac" 0x4) 0x2 ;; dlink,dir-842-c1|\ @@ -96,11 +58,11 @@ case "$FIRMWARE" in dlink,dir-859-a1|\ nec,wg1200cr|\ wd,mynet-n750) - ath9k_eeprom_extract "art" 0x1000 0x440 + caldata_extract "art" 0x1000 0x440 ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2 ;; engenius,ecb1750) - ath9k_eeprom_extract "art" 0x1000 0x440 + caldata_extract "art" 0x1000 0x440 ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 0x2 ;; engenius,epg5000|\ @@ -108,39 +70,39 @@ case "$FIRMWARE" in iodata,wn-ac1600dgr|\ iodata,wn-ac1600dgr2|\ iodata,wn-ag300dgr) - ath9k_eeprom_extract "art" 0x1000 0x440 + caldata_extract "art" 0x1000 0x440 ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 0x2 ;; nec,wg800hp) - ath9k_eeprom_extract "art" 0x1000 0x440 + caldata_extract "art" 0x1000 0x440 ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 0x2 ;; qihoo,c301) - ath9k_eeprom_extract "radiocfg" 0x1000 0x440 + caldata_extract "radiocfg" 0x1000 0x440 ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2 ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; "ath9k-eeprom-pci-0000:00:00.0.bin") case $board in avm,fritz300e) - ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440 + caldata_extract_reverse "urloader" 0x1541 0x440 ;; buffalo,whr-g301n|\ buffalo,wzr-hp-g302h-a1a0|\ tplink,tl-wr841-v5|\ tplink,tl-wr941-v4) - ath9k_eeprom_extract "art" 0x1000 0xeb8 + caldata_extract "art" 0x1000 0xeb8 ;; buffalo,wzr-hp-g450h) - ath9k_eeprom_extract "art" 0x1000 0x440 + caldata_extract "art" 0x1000 0x440 ;; dlink,dir-825-c1|\ dlink,dir-835-a1) - ath9k_eeprom_extract "art" 0x5000 0x440 + caldata_extract "art" 0x5000 0x440 ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 0x2 ;; ocedo,raccoon|\ @@ -149,7 +111,7 @@ case "$FIRMWARE" in tplink,tl-wdr4300-v1|\ tplink,tl-wdr4900-v2|\ winchannel,wb2000) - ath9k_eeprom_extract "art" 0x5000 0x440 + caldata_extract "art" 0x5000 0x440 ;; netgear,wnr612-v2|\ on,n150r|\ @@ -167,24 +129,24 @@ case "$FIRMWARE" in ubnt,bullet-m|\ ubnt,nano-m|\ ubnt,rocket-m) - ath9k_eeprom_extract "art" 0x1000 0x1000 + caldata_extract "art" 0x1000 0x1000 ;; pqi,air-pen) - ath9k_eeprom_extract "art" 0x1000 0x7d2 + caldata_extract "art" 0x1000 0x7d2 ;; ubnt,unifi) - ath9k_eeprom_extract "art" 0x1000 0x800 + caldata_extract "art" 0x1000 0x800 ;; wd,mynet-n750) - ath9k_eeprom_extract "art" 0x5000 0x440 + caldata_extract "art" 0x5000 0x440 ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 0x2 ;; wd,mynet-wifi-rangeextender) - ath9k_eeprom_extract "art" 0x1000 0x1000 + caldata_extract "art" 0x1000 0x1000 ath9k_patch_fw_mac $(nvram get wl0_hwaddr) "$mac" 0x2 ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; @@ -195,14 +157,14 @@ case "$FIRMWARE" in netgear,wndr3700v2|\ netgear,wndr3800|\ netgear,wndr3800ch) - ath9k_eeprom_extract "art" 0x1000 0xeb8 + caldata_extract "art" 0x1000 0xeb8 ;; dlink,dir-825-b1) - ath9k_eeprom_extract "caldata" 0x1000 0xeb8 + caldata_extract "caldata" 0x1000 0xeb8 ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; @@ -213,14 +175,14 @@ case "$FIRMWARE" in netgear,wndr3700v2|\ netgear,wndr3800|\ netgear,wndr3800ch) - ath9k_eeprom_extract "art" 0x5000 0xeb8 + caldata_extract "art" 0x5000 0xeb8 ;; dlink,dir-825-b1) - ath9k_eeprom_extract "caldata" 0x5000 0xeb8 + caldata_extract "caldata" 0x5000 0xeb8 ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 3844481f5a..878f6443ab 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -1,35 +1,9 @@ #!/bin/sh -. /lib/functions.sh -. /lib/functions/k2t.sh - -ath10kcal_die() { - echo "ath10cal: " "$*" - exit 1 -} - -ath10kcal_from_file() { - local source=$1 - local offset=$(($2)) - local count=$(($3)) - - dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $source" -} - -ath10kcal_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath10kcal_die "no mtd device found for partition $part" +[ -e /lib/firmware/$FIRMWARE ] && exit 0 - dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $mtd" -} +. /lib/functions/caldata.sh +. /lib/functions/k2t.sh ath10kcal_patch_mac() { local mac=$1 @@ -62,10 +36,6 @@ ath10kcal_patch_mac_crc() { } } -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions/system.sh - board=$(board_name) case "$FIRMWARE" in @@ -74,7 +44,7 @@ case "$FIRMWARE" in comfast,cf-wr650ac-v1|\ comfast,cf-wr650ac-v2|\ yuncore,a770) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ;; devolo,dvl1200e|\ devolo,dvl1200i|\ @@ -82,54 +52,54 @@ case "$FIRMWARE" in devolo,dvl1750e|\ devolo,dvl1750i|\ devolo,dvl1750x) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1) ;; dlink,dir-859-a1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac") ;; elecom,wrc-1750ghbk2-i) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ;; engenius,ecb1750) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr) ;; engenius,epg5000|\ iodata,wn-ac1167dgr|\ iodata,wn-ac1600dgr2) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) ;; engenius,ews511ap) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; glinet,gl-ar750|\ glinet,gl-ar750s) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) ;; glinet,gl-x750) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) ;; nec,wg800hp) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880) ;; ocedo,koala|\ ocedo,ursus) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc) ;; openmesh,om5p-ac-v2) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; qihoo,c301) - ath10kcal_extract "radiocfg" 0x5000 0x844 + caldata_extract "radiocfg" 0x5000 0x844 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) ;; tplink,archer-a7-v5|\ @@ -137,29 +107,29 @@ case "$FIRMWARE" in tplink,archer-c7-v4|\ tplink,archer-c7-v5|\ tplink,archer-c25-v1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1) ;; tplink,archer-c5-v1|\ tplink,archer-c7-v2) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1) ;; tplink,archer-d50-v1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2) ;; tplink,re350k-v1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2) ;; tplink,re355-v1|\ tplink,re450-v1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; tplink,re450-v2) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1) ;; ubnt,unifiac-lite|\ @@ -170,14 +140,14 @@ case "$FIRMWARE" in ubnt,nanostation-ac|\ ubnt,nanostation-ac-loco|\ ubnt,unifiac-pro) - ath10kcal_extract "EEPROM" 0x5000 0x844 + caldata_extract "EEPROM" 0x5000 0x844 ;; esac ;; "ath10k/pre-cal-pci-0000:00:00.0.bin") case $board in comfast,cf-e313ac) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary art 0x6) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin @@ -187,18 +157,18 @@ case "$FIRMWARE" in dlink,dir-842-c2|\ dlink,dir-842-c3|\ nec,wg1200cr) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; netgear,ex6400|\ netgear,ex7300) - ath10kcal_extract "caldata" 0x5000 0x2f20 + caldata_extract "caldata" 0x5000 0x2f20 ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc) ;; phicomm,k2t) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac") ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin @@ -209,7 +179,7 @@ case "$FIRMWARE" in tplink,archer-c60-v1|\ tplink,archer-c60-v2|\ tplink,archer-c6-v2) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin diff --git a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 305d5feda5..2400eb998a 100644 --- a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -1,28 +1,9 @@ #!/bin/sh # Based on gabors ralink wisoc implementation. -rt2x00_eeprom_die() { - echo "rt2x00 eeprom: " "$*" - exit 1 -} - -rt2x00_eeprom_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_part $part) - [ -n "$mtd" ] || \ - rt2x00_eeprom_die "no mtd device found for partition $part" - - dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \ - rt2x00_eeprom_die "failed to extract from $mtd" -} - [ -e /lib/firmware/$FIRMWARE ] && exit 0 -. /lib/functions.sh +. /lib/functions/caldata.sh board=$(board_name) @@ -30,14 +11,14 @@ case "$FIRMWARE" in "rt2x00.eeprom" ) case $board in hg556a_c) - rt2x00_eeprom_extract "cal_data" 0x1fe00 0x200 + caldata_extract "cal_data" 0x1fe00 0x200 ;; hg622 |\ hg655b) - rt2x00_eeprom_extract "cal_data" 0x0 0x200 + caldata_extract "cal_data" 0x0 0x200 ;; *) - rt2x00_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index dfb0a0cf76..61597ea669 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -1,43 +1,8 @@ #!/bin/sh -. /lib/functions.sh - -ath10kcal_die() { - echo "ath10cal: " "$*" - exit 1 -} - -ath10kcal_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath10kcal_die "no mtd device found for partition $part" - - dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $mtd" -} - -ath10kcal_ubi_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local ubidev - local ubi - - . /lib/upgrade/nand.sh - - ubidev=$(nand_find_ubi $CI_UBIPART) - ubi=$(nand_find_volume $ubidev $part) - [ -n "$ubi" ] || \ - ath10kcal_die "no UBI volume found for $part" +[ -e /lib/firmware/$FIRMWARE ] && exit 0 - dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath10kcal_die "failed to extract from $ubi" -} +. /lib/functions/caldata.sh ath10kcal_patch_mac_crc() { local mac=$1 @@ -64,26 +29,14 @@ ath10kcal_patch_mac_crc() { dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2 } -ath10kcal_is_caldata_valid() { - local expected="$1" - - magic=$(hexdump -v -n 2 -e '1/1 "%02x"' /lib/firmware/$FIRMWARE) - [[ "$magic" == "$expected" ]] - return $? -} - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions/system.sh - board=$(board_name) case "$FIRMWARE" in "ath10k/cal-pci-0000:01:00.0.bin") case "$board" in meraki,mr33) - ath10kcal_ubi_extract "ART" 0x9000 0x844 - ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 0x9000 0x844 + caldata_extract_ubi "ART" 0x9000 0x844 + caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1) ;; esac @@ -91,7 +44,7 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case "$board" in asus,map-ac2200) - ath10kcal_ubi_extract "Factory" 0x9000 0x2f20 + caldata_extract_ubi "Factory" 0x9000 0x2f20 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; @@ -104,12 +57,12 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; linksys,ea8300) - ath10kcal_extract "ART" 0x9000 0x2f20 + caldata_extract "ART" 0x9000 0x2f20 # OEM assigns 4 sequential MACs ath10kcal_patch_mac_crc $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4)) ;; openmesh,a62) - ath10kcal_extract "0:ART" 0x9000 0x2f20 + caldata_extract "0:ART" 0x9000 0x2f20 ;; esac ;; @@ -120,14 +73,14 @@ case "$FIRMWARE" in glinet,gl-b1300 |\ linksys,ea6350v3 |\ qcom,ap-dk01.1-c1) - ath10kcal_extract "ART" 0x1000 0x2f20 + caldata_extract "ART" 0x1000 0x2f20 ;; asus,map-ac2200) - ath10kcal_ubi_extract "Factory" 0x1000 0x2f20 + caldata_extract_ubi "Factory" 0x1000 0x2f20 ;; asus,rt-ac58u) CI_UBIPART=UBI_DEV - ath10kcal_ubi_extract "Factory" 0x1000 0x2f20 + caldata_extract_ubi "Factory" 0x1000 0x2f20 ;; avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") @@ -147,29 +100,29 @@ case "$FIRMWARE" in openmesh,a62 |\ qxwlan,e2600ac-c1 |\ qxwlan,e2600ac-c2) - ath10kcal_extract "0:ART" 0x1000 0x2f20 + caldata_extract "0:ART" 0x1000 0x2f20 ;; engenius,ens620ext) - ath10kcal_extract "ART" 0x1000 0x2f20 + caldata_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2) ;; linksys,ea8300) - ath10kcal_extract "ART" 0x1000 0x2f20 + caldata_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2) ;; meraki,mr33) - ath10kcal_ubi_extract "ART" 0x1000 0x2f20 - ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x1000 0x2f20 + caldata_extract_ubi "ART" 0x1000 0x2f20 + caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2) ;; netgear,ex6100v2 |\ netgear,ex6150v2) - ath10kcal_extract "ART" 0x1000 0x2f20 + caldata_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0x0) ;; zyxel,nbg6617 |\ zyxel,wre6606) - ath10kcal_extract "ART" 0x1000 0x2f20 + caldata_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; esac @@ -181,14 +134,14 @@ case "$FIRMWARE" in glinet,gl-b1300 |\ linksys,ea6350v3 |\ qcom,ap-dk01.1-c1) - ath10kcal_extract "ART" 0x5000 0x2f20 + caldata_extract "ART" 0x5000 0x2f20 ;; asus,map-ac2200) - ath10kcal_ubi_extract "Factory" 0x5000 0x2f20 + caldata_extract_ubi "Factory" 0x5000 0x2f20 ;; asus,rt-ac58u) CI_UBIPART=UBI_DEV - ath10kcal_ubi_extract "Factory" 0x5000 0x2f20 + caldata_extract_ubi "Factory" 0x5000 0x2f20 ;; avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") @@ -208,29 +161,29 @@ case "$FIRMWARE" in openmesh,a62 |\ qxwlan,e2600ac-c1 |\ qxwlan,e2600ac-c2) - ath10kcal_extract "0:ART" 0x5000 0x2f20 + caldata_extract "0:ART" 0x5000 0x2f20 ;; engenius,ens620ext) - ath10kcal_extract "ART" 0x5000 0x2f20 + caldata_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3) ;; linksys,ea8300) - ath10kcal_extract "ART" 0x5000 0x2f20 + caldata_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3) ;; meraki,mr33) - ath10kcal_ubi_extract "ART" 0x5000 0x2f20 - ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x5000 0x2f20 + caldata_extract_ubi "ART" 0x5000 0x2f20 + caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3) ;; netgear,ex6100v2 |\ netgear,ex6150v2) - ath10kcal_extract "ART" 0x5000 0x2f20 + caldata_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0xc) ;; zyxel,nbg6617 |\ zyxel,wre6606) - ath10kcal_extract "ART" 0x5000 0x2f20 + caldata_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; esac diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index c0fb1db16d..12b76ec33f 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -1,34 +1,8 @@ #!/bin/sh -. /lib/functions.sh - -ath10kcal_die() { - echo "ath10cal: " "$*" - exit 1 -} - -ath10kcal_from_file() { - local source=$1 - local offset=$(($2)) - local count=$(($3)) - - dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $source" -} - -ath10kcal_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath10kcal_die "no mtd device found for partition $part" +[ -e /lib/firmware/$FIRMWARE ] && exit 0 - dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $mtd" -} +. /lib/functions/caldata.sh ath10kcal_patch_mac_crc() { local mac=$1 @@ -55,43 +29,39 @@ ath10kcal_patch_mac_crc() { dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2 } -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions/system.sh - board=$(board_name) case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in buffalo,wxr-2533dhp) - ath10kcal_extract "ART" 0x1000 0x2f20 + caldata_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x1e) ;; linksys,ea8500) - ath10kcal_extract "art" 0x1000 0x2f20 + caldata_extract "art" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1) ;; nec,wg2600hp) - ath10kcal_extract "ART" 0x1000 0x2f20 + caldata_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary PRODUCTDATA 0xc) +1) ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) - ath10kcal_extract "art" 0x1000 0x2f20 + caldata_extract "art" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +1) ;; tplink,c2600) - ath10kcal_extract "radio" 0x1000 0x2f20 + caldata_extract "radio" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1) ;; tplink,vr2600v) - ath10kcal_extract "ART" 0x1000 0x2f20 + caldata_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x0) -1) ;; zyxel,nbg6817) - ath10kcal_extract "0:ART" 0x1000 0x2f20 + caldata_extract "0:ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1) ;; esac @@ -99,33 +69,33 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0001:01:00.0.bin") case $board in buffalo,wxr-2533dhp) - ath10kcal_extract "ART" 0x5000 0x2f20 + caldata_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x18) ;; linksys,ea8500) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2) ;; nec,wg2600hp) - ath10kcal_extract "ART" 0x5000 0x2f20 + caldata_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary PRODUCTDATA 0xc) ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +2) ;; tplink,c2600) - ath10kcal_extract "radio" 0x5000 0x2f20 + caldata_extract "radio" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x8) ;; tplink,vr2600v) - ath10kcal_extract "ART" 0x5000 0x2f20 + caldata_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x0) ;; zyxel,nbg6817) - ath10kcal_extract "0:ART" 0x5000 0x2f20 + caldata_extract "0:ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) ;; esac diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 6d7682a7f3..5b03fb0e01 100644 --- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -3,29 +3,7 @@ [ -e /lib/firmware/$FIRMWARE ] && exit 0 -. /lib/functions.sh -. /lib/functions/system.sh -. /lib/upgrade/nand.sh - -ath10k_caldata_die() { - echo "ath10k caldata: " "$*" - exit 1 -} - -ath10k_caldata_extract_ubi() { - local part=$1 - local offset=$2 - local count=$3 - local ubidev=$(nand_find_ubi $CI_UBIPART) - local ubi - - ubi=$(nand_find_volume $ubidev $part) - [ -n "$ubi" ] || \ - ath10k_caldata_die "no UBI volume found for $part" - - dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \ - ath10k_caldata_die "failed to extract from $ubi" -} +. /lib/functions/caldata.sh ath10k_caldata_set_macaddr() { local macaddr=$1 @@ -39,11 +17,11 @@ case "$FIRMWARE" in board=$(board_name) case $board in bt,homehub-v5a) - ath10k_caldata_extract_ubi "caldata" 20480 2116 + caldata_extract_ubi "caldata" 0x5000 0x844 ath10k_caldata_set_macaddr $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +3) ;; *) - ath10k_caldata_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index 2c4a5a1799..20160cb32b 100644 --- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -3,15 +3,9 @@ [ -e /lib/firmware/$FIRMWARE ] && exit 0 -. /lib/functions.sh -. /lib/functions/system.sh +. /lib/functions/caldata.sh . /lib/upgrade/nand.sh -ath9k_eeprom_die() { - echo "ath9k eeprom: $*" - exit 1 -} - ath9k_eeprom_extract_raw() { local source=$1 local offset=$(($2)) @@ -28,25 +22,7 @@ ath9k_eeprom_extract_raw() { fi dd if=$source of=/lib/firmware/$FIRMWARE bs=$bs skip=$offset count=$size $conv 2>/dev/null || \ - ath9k_eeprom_die "failed to extract from $mtd" -} - -ath9k_eeprom_extract_reverse() { - local part=$1 - local offset=$2 - local count=$(($3)) - local mtd - local reversed - local caldata - - mtd=$(find_mtd_chardev "$part") - reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd) - - for byte in $reversed; do - caldata="\x${byte}${caldata}" - done - - printf "%b" "$caldata" > /lib/firmware/$FIRMWARE + caldata_die "failed to extract from $mtd" } ath9k_eeprom_extract() { @@ -57,7 +33,7 @@ ath9k_eeprom_extract() { mtd=$(find_mtd_chardev $part) [ -n "$mtd" ] || \ - ath9k_eeprom_die "no mtd device found for partition $part" + caldata_die "no mtd device found for partition $part" ath9k_eeprom_extract_raw $mtd $offset $swap } @@ -71,7 +47,7 @@ ath9k_ubi_eeprom_extract() { ubi=$(nand_find_volume $ubidev $part) [ -n "$ubi" ] || \ - ath9k_eeprom_die "no UBI volume found for $part" + caldata_die "no UBI volume found for $part" ath9k_eeprom_extract_raw /dev/$ubi $offset $swap } @@ -143,7 +119,7 @@ case "$FIRMWARE" in avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron|\ avm,fritz7362sl) - ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 + caldata_extract_reverse "urlader" 0x1541 0x440 ;; avm,fritz7312|avm,fritz7320|avm,fritz7360sl) ath9k_eeprom_extract "urlader" 0x985 0 @@ -155,7 +131,7 @@ case "$FIRMWARE" in ath9k_eeprom_extract "boardconfig" 0x21000 0 ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; diff --git a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index dc66226d7b..bcde02593a 100644 --- a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -1,25 +1,8 @@ #!/bin/sh -FW_FILE="/lib/firmware/$FIRMWARE" +[ -e /lib/firmware/$FIRMWARE ] && exit 0 -ath9k_eeprom_die() { - echo "ath9k eeprom: " "$*" >&2 - exit 1 -} - -ath9k_eeprom_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath9k_eeprom_die "no mtd device found for partition $part" - - dd if=$mtd bs=$offset skip=1 count=1 2>/dev/null | dd of=$FW_FILE bs=$count count=1 2>/dev/null || \ - ath9k_eeprom_die "failed to extract from $mtd" -} +. /lib/functions/caldata.sh tpl_set_wireless_mac() { @@ -29,25 +12,20 @@ tpl_set_wireless_mac() mac=$(mtd_get_mac_binary u-boot 0x4fc00) mac=$(macaddr_add $mac $offset) - macaddr_2bin $mac | dd bs=1 count=6 seek=2 conv=notrunc of=$FW_FILE 2>/dev/null + macaddr_2bin $mac | dd bs=1 count=6 seek=2 conv=notrunc of=/lib/firmware/$FIRMWARE 2>/dev/null } -[ -e $FW_FILE ] && exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh - board=$(board_name) case "$FIRMWARE" in "pci_wmac0.eeprom") case $board in tplink,tl-wdr4900-v1) - ath9k_eeprom_extract "caldata" 0x1000 0x800 + caldata_extract "caldata" 0x1000 0x800 tpl_set_wireless_mac 0 ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; @@ -55,11 +33,11 @@ case "$FIRMWARE" in "pci_wmac1.eeprom") case $board in tplink,tl-wdr4900-v1) - ath9k_eeprom_extract "caldata" 0x5000 0x800 + caldata_extract "caldata" 0x5000 0x800 tpl_set_wireless_mac -1 ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 7b98936ec3..ec70d86dac 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -1,23 +1,8 @@ #!/bin/sh -rt2x00_eeprom_die() { - echo "rt2x00 eeprom: " "$*" - exit 1 -} - -rt2x00_eeprom_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_part $part) - [ -n "$mtd" ] || \ - rt2x00_eeprom_die "no mtd device found for partition $part" +[ -e /lib/firmware/$FIRMWARE ] && exit 0 - dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - rt2x00_eeprom_die "failed to extract from $mtd" -} +. /lib/functions/caldata.sh jboot_eeprom_extract() { local part=$1 @@ -26,29 +11,23 @@ jboot_eeprom_extract() { mtd=$(find_mtd_part $part) [ -n "$mtd" ] || \ - rt2x00_eeprom_die "no mtd device found for partition $part" + caldata_die "no mtd device found for partition $part" jboot_config_read -i $mtd -o $offset -e /lib/firmware/$FIRMWARE 2>/dev/null || \ - rt2x00_eeprom_die "failed to extract from $mtd" + caldata_die "failed to extract from $mtd" } rt2x00_eeprom_set_macaddr() { local macaddr=$1 [ -n "$macaddr" ] || \ - rt2x00_eeprom_die "invalid wlan mac address" + caldata_die "invalid wlan mac address" macaddr_2bin $macaddr | dd of=/lib/firmware/$FIRMWARE \ conv=notrunc oflag=seek_bytes bs=6 seek=4 count=1 2>/dev/null || \ - rt2x00_eeprom_die "failed to write mac address to eeprom file" + caldata_die "failed to write mac address to eeprom file" } -FW="/lib/firmware/$FIRMWARE" -[ -e "$FW" ] && exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh - board=$(board_name) case "$FIRMWARE" in @@ -68,11 +47,11 @@ case "$FIRMWARE" in ;; dovado,tiny-ac) wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR) - rt2x00_eeprom_extract "factory" 0x0 0x200 + caldata_extract "factory" 0x0 0x200 rt2x00_eeprom_set_macaddr $wifi_mac ;; *) - rt2x00_eeprom_die "Please define mtd-eeprom in $board DTS file!" + caldata_die "Please define mtd-eeprom in $board DTS file!" ;; esac ;; |