diff options
Diffstat (limited to 'target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata')
| -rw-r--r-- | target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 86 |
1 files changed, 28 insertions, 58 deletions
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 3844481f5a..878f6443ab 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -1,35 +1,9 @@ #!/bin/sh -. /lib/functions.sh -. /lib/functions/k2t.sh - -ath10kcal_die() { - echo "ath10cal: " "$*" - exit 1 -} - -ath10kcal_from_file() { - local source=$1 - local offset=$(($2)) - local count=$(($3)) - - dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $source" -} - -ath10kcal_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath10kcal_die "no mtd device found for partition $part" +[ -e /lib/firmware/$FIRMWARE ] && exit 0 - dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $mtd" -} +. /lib/functions/caldata.sh +. /lib/functions/k2t.sh ath10kcal_patch_mac() { local mac=$1 @@ -62,10 +36,6 @@ ath10kcal_patch_mac_crc() { } } -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions/system.sh - board=$(board_name) case "$FIRMWARE" in @@ -74,7 +44,7 @@ case "$FIRMWARE" in comfast,cf-wr650ac-v1|\ comfast,cf-wr650ac-v2|\ yuncore,a770) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ;; devolo,dvl1200e|\ devolo,dvl1200i|\ @@ -82,54 +52,54 @@ case "$FIRMWARE" in devolo,dvl1750e|\ devolo,dvl1750i|\ devolo,dvl1750x) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1) ;; dlink,dir-859-a1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac") ;; elecom,wrc-1750ghbk2-i) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ;; engenius,ecb1750) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr) ;; engenius,epg5000|\ iodata,wn-ac1167dgr|\ iodata,wn-ac1600dgr2) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) ;; engenius,ews511ap) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; glinet,gl-ar750|\ glinet,gl-ar750s) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) ;; glinet,gl-x750) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) ;; nec,wg800hp) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880) ;; ocedo,koala|\ ocedo,ursus) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc) ;; openmesh,om5p-ac-v2) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; qihoo,c301) - ath10kcal_extract "radiocfg" 0x5000 0x844 + caldata_extract "radiocfg" 0x5000 0x844 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) ;; tplink,archer-a7-v5|\ @@ -137,29 +107,29 @@ case "$FIRMWARE" in tplink,archer-c7-v4|\ tplink,archer-c7-v5|\ tplink,archer-c25-v1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1) ;; tplink,archer-c5-v1|\ tplink,archer-c7-v2) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1) ;; tplink,archer-d50-v1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2) ;; tplink,re350k-v1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2) ;; tplink,re355-v1|\ tplink,re450-v1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; tplink,re450-v2) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1) ;; ubnt,unifiac-lite|\ @@ -170,14 +140,14 @@ case "$FIRMWARE" in ubnt,nanostation-ac|\ ubnt,nanostation-ac-loco|\ ubnt,unifiac-pro) - ath10kcal_extract "EEPROM" 0x5000 0x844 + caldata_extract "EEPROM" 0x5000 0x844 ;; esac ;; "ath10k/pre-cal-pci-0000:00:00.0.bin") case $board in comfast,cf-e313ac) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary art 0x6) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin @@ -187,18 +157,18 @@ case "$FIRMWARE" in dlink,dir-842-c2|\ dlink,dir-842-c3|\ nec,wg1200cr) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; netgear,ex6400|\ netgear,ex7300) - ath10kcal_extract "caldata" 0x5000 0x2f20 + caldata_extract "caldata" 0x5000 0x2f20 ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc) ;; phicomm,k2t) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac") ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin @@ -209,7 +179,7 @@ case "$FIRMWARE" in tplink,archer-c60-v1|\ tplink,archer-c60-v2|\ tplink,archer-c6-v2) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin |