1 files changed, 0 insertions, 132 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c
deleted file mode 100644
index 43af71a0a8..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *  AVM FRITZ!WLAN Repeater 300E board support
- *
- *  Copyright (C) 2017 Mathias Kresin <dev@kresin.me>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define FRITZ300E_KEYS_POLL_INTERVAL	 	20 /* msecs */
-#define FRITZ300E_KEYS_DEBOUNCE_INTERVAL	(3 * FRITZ300E_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition fritz300e_flash_partitions[] = {
-	{
-		.name		= "urloader",
-		.offset		= 0,
-		.size		= 0x0020000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x0020000,
-		.size		= 0x0ee0000,
-	}, {
-		.name		= "tffs (1)",
-		.offset		= 0x0f00000,
-		.size		= 0x0080000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name           = "tffs (2)",
-		.offset         = 0x0f80000,
-		.size           = 0x0080000,
-		.mask_flags     = MTD_WRITEABLE,
-	}
-};
-
-static struct flash_platform_data fritz300e_flash_data = {
-	.parts		= fritz300e_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(fritz300e_flash_partitions),
-};
-
-static struct gpio_led fritz300e_leds_gpio[] __initdata = {
-	{
-		.name		= "fritz300e:green:power",
-		.gpio		= 13,
-		.active_low	= 1,
-	}, {
-		.name		= "fritz300e:green:lan",
-		.gpio		= 15,
-		.active_low	= 1,
-	}, {
-		.name		= "fritz300e:green:wlan",
-		.gpio		= 16,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_led fritz300e_wmac_leds_gpio[] = {
-	{
-		.name		= "fritz300e:green:rssi0",
-		.gpio		= 10,
-		.active_low	= 1,
-	}, {
-		.name		= "fritz300e:green:rssi1",
-		.gpio		= 4,
-		.active_low	= 1,
-	}, {
-		.name		= "fritz300e:green:rssi2",
-		.gpio		= 6,
-		.active_low	= 1,
-	}, {
-		.name		= "fritz300e:green:rssi3",
-		.gpio		= 7,
-		.active_low	= 1,
-	}, {
-		.name		= "fritz300e:green:rssi4",
-		.gpio		= 5,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button fritz300e_gpio_keys[] __initdata = {
-	{
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = FRITZ300E_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 12,
-		.active_low	= 1,
-	},
-};
-
-static void __init fritz300e_setup(void)
-{
-	/* get the Lantiq PEF7071V phy out of reset */
-	gpio_request_one(11, GPIOF_OUT_INIT_HIGH, "phy reset");
-
-	ath79_register_m25p80(&fritz300e_flash_data);
-
-	ath79_register_mdio(0, ~(BIT(0)));
-
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.phy_mask = BIT(0);
-
-	ath79_register_eth(0);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz300e_leds_gpio),
-				 fritz300e_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, FRITZ300E_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(fritz300e_gpio_keys),
-					fritz300e_gpio_keys);
-
-	ap9x_pci_setup_wmac_leds(0, fritz300e_wmac_leds_gpio,
-				 ARRAY_SIZE(fritz300e_wmac_leds_gpio));
-	ap91_pci_init_simple();
-}
-
-MIPS_MACHINE(ATH79_MACH_FRITZ300E, "FRITZ300E",
-	     "AVM FRITZ!WLAN Repeater 300E", fritz300e_setup);