ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 132 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c
deleted file mode 100644
index 43af71a0a8..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *  AVM FRITZ!WLAN Repeater 300E board support
- *
- *  Copyright (C) 2017 Mathias Kresin <dev@kresin.me>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define FRITZ300E_KEYS_POLL_INTERVAL	 	20 /* msecs */
-#define FRITZ300E_KEYS_DEBOUNCE_INTERVAL	(3 * FRITZ300E_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition fritz300e_flash_partitions[] = {
-	{
-		.name		= "urloader",
-		.offset		= 0,
-		.size		= 0x0020000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x0020000,
-		.size		= 0x0ee0000,
-	}, {
-		.name		= "tffs (1)",
-		.offset		= 0x0f00000,
-		.size		= 0x0080000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name           = "tffs (2)",
-		.offset         = 0x0f80000,
-		.size           = 0x0080000,
-		.mask_flags     = MTD_WRITEABLE,
-	}
-};
-
-static struct flash_platform_data fritz300e_flash_data = {
-	.parts		= fritz300e_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(fritz300e_flash_partitions),
-};
-
-static struct gpio_led fritz300e_leds_gpio[] __initdata = {
-	{
-		.name		= "fritz300e:green:power",
-		.gpio		= 13,
-		.active_low	= 1,
-	}, {
-		.name		= "fritz300e:green:lan",
-		.gpio		= 15,
-		.active_low	= 1,
-	}, {
-		.name		= "fritz300e:green:wlan",
-		.gpio		= 16,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_led fritz300e_wmac_leds_gpio[] = {
-	{
-		.name		= "fritz300e:green:rssi0",
-		.gpio		= 10,
-		.active_low	= 1,
-	}, {
-		.name		= "fritz300e:green:rssi1",
-		.gpio		= 4,
-		.active_low	= 1,
-	}, {
-		.name		= "fritz300e:green:rssi2",
-		.gpio		= 6,
-		.active_low	= 1,
-	}, {
-		.name		= "fritz300e:green:rssi3",
-		.gpio		= 7,
-		.active_low	= 1,
-	}, {
-		.name		= "fritz300e:green:rssi4",
-		.gpio		= 5,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button fritz300e_gpio_keys[] __initdata = {
-	{
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = FRITZ300E_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 12,
-		.active_low	= 1,
-	},
-};
-
-static void __init fritz300e_setup(void)
-{
-	/* get the Lantiq PEF7071V phy out of reset */
-	gpio_request_one(11, GPIOF_OUT_INIT_HIGH, "phy reset");
-
-	ath79_register_m25p80(&fritz300e_flash_data);
-
-	ath79_register_mdio(0, ~(BIT(0)));
-
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.phy_mask = BIT(0);
-
-	ath79_register_eth(0);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz300e_leds_gpio),
-				 fritz300e_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, FRITZ300E_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(fritz300e_gpio_keys),
-					fritz300e_gpio_keys);
-
-	ap9x_pci_setup_wmac_leds(0, fritz300e_wmac_leds_gpio,
-				 ARRAY_SIZE(fritz300e_wmac_leds_gpio));
-	ap91_pci_init_simple();
-}
-
-MIPS_MACHINE(ATH79_MACH_FRITZ300E, "FRITZ300E",
-	     "AVM FRITZ!WLAN Repeater 300E", fritz300e_setup);