diff options
Diffstat (limited to 'target/linux/ar71xx/base-files')
24 files changed, 0 insertions, 6581 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds deleted file mode 100755 index 54727a6e52..0000000000 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ /dev/null @@ -1,1130 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2011 OpenWrt.org -# - -. /lib/functions/uci-defaults.sh - -board_config_update - -board=$(board_name) - -case "$board" in -a40) - ucidef_set_led_default "status-red" "Status (red)" "a40:red:status" "0" - ucidef_set_led_default "status-blue" "Status (blue)" "a40:blue:status" "0" - ;; -a60) - ucidef_set_led_default "status-red" "Status (red)" "a60:red:status" "0" - ucidef_set_led_default "status-blue" "Status (blue)" "a60:blue:status" "0" - ;; -airgateway|\ -airgatewaypro) - ucidef_set_led_wlan "wlan" "WLAN" "ubnt:blue:wlan" "phy0tpt" - ;; -alfa-nx) - ucidef_set_led_netdev "wan" "WAN" "alfa:green:led_2" "eth0" - ucidef_set_led_netdev "lan" "LAN" "alfa:green:led_3" "eth1" - ;; -all0258n|\ -all0315n) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:red:rssilow" "wlan0" "1" "40" "0" "6" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$board:yellow:rssimedium" "wlan0" "30" "80" "-29" "5" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:rssihigh" "wlan0" "70" "100" "-69" "8" - ;; -antminer-s1|\ -antminer-s3) - ucidef_set_led_default "sys" "SYS" "$board:green:sys" "0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - - case "$board" in - antminer-s3) - ucidef_set_led_default "lan" "LAN" "$board:yellow:lan" "0" - ;; - esac - ;; -antrouter-r1) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0" - ;; -ap121f) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; -ap147-010) - ucidef_set_led_netdev "wan" "WAN" "ap147:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "ap147:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "ap147:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "ap147:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt" - ;; -ap90q|\ -cpe505n|\ -cpe830|\ -cpe870|\ -dr531|\ -e600g-v2|\ -e600gac-v2|\ -e750a-v4) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" - - case "$board" in - ap90q) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; - cpe505n) - ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" - ;; - cpe830|\ - cpe870) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:link1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:green:link2" "wlan0" "26" "100" "-25" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:green:link3" "wlan0" "51" "100" "-50" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:link4" "wlan0" "76" "100" "-75" "13" - ;; - esac - ;; -ap531b0|\ -gl-usb150|\ -sc1750|\ -sc450) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; -ap91-5g|\ -n5q) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "signal1" "SIGNAL1" "$board:red:signal1" "wlan0" "1" "100" - ucidef_set_led_rssi "signal2" "SIGNAL2" "$board:orange:signal2" "wlan0" "25" "100" - ucidef_set_led_rssi "signal3" "SIGNAL3" "$board:green:signal3" "wlan0" "50" "100" - ucidef_set_led_rssi "signal4" "SIGNAL4" "$board:green:signal4" "wlan0" "75" "100" - - case "$board" in - n5q) - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; - esac - ;; -archer-c25-v1) - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" - ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02" - ;; -archer-c5|\ -archer-c7) - ucidef_set_led_usbport "usb1" "USB1" "tp-link:green:usb1" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB2" "tp-link:green:usb2" "usb2-port1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:green:wlan5g" "phy0tpt" - ;; -archer-c58-v1|\ -archer-c59-v1|\ -archer-c59-v2|\ -archer-c60-v1|\ -archer-c60-v2) - ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" - - case "$board" in - archer-c59-v1|\ - archer-c59-v2) - ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" - ;; - esac - ;; -archer-c7-v4|\ -archer-c7-v5) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" - ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02" - ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan4" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan2" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan1" "switch0" "0x20" - - case "$board" in - archer-c7-v4) - ucidef_set_led_usbport "usb1" "USB1" "$board:green:usb1" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB2" "$board:green:usb2" "usb2-port1" - ;; - esac - - case "$board" in - archer-c7-v5) - ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" - ;; - esac - ;; -arduino-yun) - ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt" - ucidef_set_led_usbport "usb" "USB" "arduino:white:usb" "1-1-port1" - ;; -bhr-4grv2) - ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1" - ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0" - ;; -bsb) - ucidef_set_led_default "sys" "SYS" "$board:red:sys" "1" - ;; -bullet-m|\ -bullet-m-xw|\ -loco-m-xw|\ -nanostation-m|\ -nanostation-m-xw|\ -rocket-m|\ -rocket-m-xw) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:red:link1" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:orange:link2" "wlan0" "26" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link3" "wlan0" "51" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link4" "wlan0" "76" "100" - ;; -bxu2000n-2-a1) - ucidef_set_led_wlan "wlan" "WLAN" "bhu:green:wlan" "phy0tpt" - ;; -cap324) - ucidef_set_led_netdev "lan" "LAN" "pcs:green:lan" "eth0" - ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "pcs:amber:wlan" "phy0tpt" - ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "pcs:green:wlan" "phy1tpt" - ;; -c-55) - ucidef_set_led_netdev "lan_green" "LAN_GREEN" "$board:green:lan" "eth0" - ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "$board:amber:wlan" "phy0tpt" - ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "$board:green:wlan" "phy1tpt" - ;; -c-60) - ucidef_set_led_wlan "wlan1_green" "WLAN1_GREEN" "$board:green:wlan1" "phy0tpt" - ucidef_set_led_wlan "wlan2_green" "WLAN2_GREEN" "$board:green:wlan2" "phy1tpt" - ;; -cap4200ag) - ucidef_set_led_default "lan_green" "LAN_GREEN" "senao:green:lan" "1" - ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "senao:amber:wlan" "phy0tpt" - ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "senao:green:wlan" "phy1tpt" - ;; -carambola2) - ucidef_set_led_netdev "lan" "LAN" "$board:orange:eth0" "eth0" - ucidef_set_led_netdev "wan" "WAN" "$board:orange:eth1" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; -cf-e316n-v2) - ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0" - ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" - ;; -cf-e320n-v2) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" - ;; -cf-e355ac-v1|\ -cf-e355ac-v2|\ -cf-e375ac|\ -cf-e380ac-v1|\ -cf-e380ac-v2|\ -cf-e385ac) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:red:wlan5g" "phy0tpt" - - case "$board" in - cf-e375ac|\ - cf-e385ac) - ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x04" - ;; - *) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ;; - esac - ;; -cf-e520n|\ -cf-e530n) - ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1" - ;; -cpe210|\ -cpe210-v2|\ -cpe210-v3|\ -cpe510|\ -cpe510-v2|\ -wbs210|\ -wbs510) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13" - - case "$board" in - cpe210-v2|\ - cpe210-v3|\ - cpe510-v2) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan0" "eth0" - ;; - *) - ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" - ;; - esac - ;; -cr3000) - ucidef_set_led_netdev "wan" "WAN" "pcs:blue:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "pcs:blue:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "pcs:blue:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt" - ;; -cr5000) - ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt" - ucidef_set_led_usbport "usb" "USB" "pcs:white:wps" "usb1-port1" - ;; -db120) - ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" - ;; -dr344) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" - ;; -dragino2) - ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt" - ucidef_set_led_netdev "lan" "LAN" "$board:red:lan" "eth0" - ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1" - ;; -dw33d) - ucidef_set_led_usbport "mmc" "MMC" "$board:blue:mmc" "usb1-port1" - ucidef_set_led_usbport "usb" "USB" "$board:blue:usb" "usb2-port1" - ucidef_set_led_netdev "internet" "INTERNET" "$board:blue:internet" "eth0" - ucidef_set_led_wlan "wlan2g" "WLAN-2.4G" "$board:blue:wlan-2g" "phy1tpt" - ;; -eap300v2) - ucidef_set_led_netdev "lan" "LAN" "engenius:blue:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "engenius:blue:wlan" "phy0tpt" - ;; -ens202ext) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "engenius:amber:wlan1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "engenius:red:wlan2" "wlan0" "25" "100" "-39" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "engenius:amber:wlan3" "wlan0" "50" "100" "-59" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "engenius:green:wlan4" "wlan0" "75" "100" "-79" "13" - ;; -f9k1115v2) - ucidef_set_led_usbport "usb2" "USB2" "belkin:green:usb2" "usb1-port1" - ;; -fritz300e) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:rssi0" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:green:rssi1" "wlan0" "20" "100" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$board:green:rssi2" "wlan0" "40" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:green:rssi3" "wlan0" "60" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:rssi4" "wlan0" "80" "100" - ;; -dap-1330-a1) - ucidef_set_rssimon "wlan0" "2000000" "2" - ucidef_set_led_rssi "wifi-low" "wifi-low" "d-link:red:wifi" "wlan0" "1" "29" - ucidef_set_led_rssi "wifi-medium" "wifi-medium" "d-link:green:wifi" "wlan0" "30" "100" - ucidef_set_led_rssi "wifi-high" "wifi-high" "d-link:green:signal1" "wlan0" "50" "100" - ucidef_set_led_rssi "wifi-max" "wifi-max" "d-link:green:signal2" "wlan0" "70" "100" - ;; -dap-2695-a1) - ucidef_set_led_default "power" "POWER" "d-link:green:power" "1" - ucidef_set_led_default "diag" "DIAG" "d-link:red:power" "0" - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:green:wlan2g" "phy1tpt" - ;; -dhp-1565-a1) - ucidef_set_led_switch "wan" "WAN" "d-link:green:planet" "switch0" "0x20" - ;; -dir-600-a1|\ -dir-615-e1|\ -dir-615-e4|\ -ebr-2310-c1) - ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "d-link:green:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "d-link:green:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "LAN3" "d-link:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "d-link:green:lan4" "switch0" "0x10" - ;; -dir-615-c1) - ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt" - ;; -dir-825-b1|\ -dir-825-c1) - ucidef_set_led_usbport "usb" "USB" "d-link:blue:usb" "usb1-port1" - - case "$board" in - dir-825-c1) - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g" "phy0tpt" - ;; - esac - ;; -dir-615-i1) - ucidef_set_led_default "power" "POWER" "d-link:green:power" "1" - ucidef_set_led_default "diag" "DIAG" "d-link:amber:power" "0" - ucidef_set_led_default "wps" "WPS" "d-link:blue:wps" "0" - ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt" - ;; -dlan-hotspot) - ucidef_set_led_wlan "wlan" "WLAN" "devolo:green:wifi" "phy0tpt" - ;; -dlan-pro-500-wp) - ucidef_set_led_default "power" "System Power" "devolo:green:status" "1" - ucidef_set_led_netdev "lan" "Ethernet Activity" "devolo:green:eth" "br-lan" - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "devolo:green:wlan-2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "devolo:blue:wlan-5g" "none" - ;; -dlan-pro-1200-ac) - ucidef_set_led_wlan "wlan" "WLAN" "devolo:status:wlan" "phy0radio" - ucidef_set_led_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0" - ucidef_set_led_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0" - ;; -e1700ac-v2) - ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" - ;; -e558-v2|\ -e750g-v8) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; -esr900) - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "engenius:blue:wlan-2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "engenius:blue:wlan-5g" "phy1tpt" - ;; -esr1750|\ -epg5000) - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan-2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan-5g" "phy0tpt" - ;; -fritz4020) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; -fritz450e) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; -gl-ar300m) - ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt" - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" - ;; -gl-ar750) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:white:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:white:wlan5g" "phy0tpt" - ;; -gl-ar750s) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" - ;; -gl-mifi) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" - ucidef_set_led_netdev "3gnet" "3GNET" "$board:green:net" "3g-wan" - ;; -gl-ar150) - ucidef_set_led_wlan "wlan" "WLAN" "$board:orange:wlan" "phy0tpt" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" - ;; -gl-ar300) - ucidef_set_led_wlan "wlan" "WLAN" "$board:wlan" "phy0tpt" - ;; -gl-domino|\ -sc300m|\ -wrt160nl) - ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" - ;; -gl-inet) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt" - ;; -hiwifi-hc6361) - ucidef_set_led_netdev "inet" "INET" "hiwifi:blue:internet" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "hiwifi:blue:wlan-2p4" "phy0tpt" - ;; -hornet-ub|\ -hornet-ub-x2) - ucidef_set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0" - ucidef_set_led_netdev "wan" "WAN" "alfa:blue:wan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt" - ucidef_set_led_usbport "usb" "USB" "alfa:blue:usb" "usb1-port1" - ;; -koala) - ucidef_set_led_default "power" "POWER" "$board:green:power" "1" - ucidef_set_led_wlan "wlan2g" "WLAN 2.4GHz" "$board:yellow:wlan2" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN 5GHz" "$board:red:wlan58" "phy0tpt" - ;; -lan-turtle) - ucidef_set_led_netdev "wan" "WAN" "$board:orange:system" "eth1" - ;; -lbe-m5) - ucidef_set_led_netdev "lan" "LAN" "ubnt:green:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "ubnt:green:wlan" "phy0tpt" - ;; -mc-mac1200r) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "mercury:green:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "mercury:green:wlan5g" "phy0tpt" - ;; -mr12|\ -mr16) - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_wlan "wlan1" "WLAN1" "$board:green:wifi1" "phy0assoc" - ucidef_set_led_wlan "wlan2" "WLAN2" "$board:green:wifi2" "phy0assoc" - ucidef_set_led_wlan "wlan3" "WLAN3" "$board:green:wifi3" "phy0assoc" - ucidef_set_led_wlan "wlan4" "WLAN4" "$board:green:wifi4" "phy0tpt" - ;; -mr18) - ucidef_set_led_netdev "wlan0" "WLAN0" "$board:blue:tricolor0" "wlan0" - ;; -mr600) - ucidef_set_led_wlan "wlan58" "WLAN58" "$board:green:wlan58" "phy0tpt" - ucidef_set_led_default "wps" "WPS" "mr600:blue:wps" "0" - ;; -mr600v2) - ucidef_set_led_default "wlan24-red" "WLAN 2.4GHz (red)" "mr600:red:wlan24" "0" - ucidef_set_led_default "wlan24-yellow" "WLAN 2.4GHz (yellow)" "mr600:yellow:wlan24" "0" - ucidef_set_led_wlan "wlan24-green" "WLAN 4GHz (green)" "mr600:green:wlan24" "phy1tpt" - ucidef_set_led_default "wlan5-red" "WLAN 5GHz (red)" "mr600:red:wlan58" "0" - ucidef_set_led_default "wlan5-yellow" "WLAN 5GHz (yellow)" "mr600:yellow:wlan58" "0" - ucidef_set_led_wlan "wlan5-green" "WLAN 5GHz (green)" "mr600:green:wlan58" "phy0tpt" - ;; -mr1750|\ -mr1750v2) - ucidef_set_led_netdev "lan" "LAN" "mr1750:blue:wan" "eth0" - ucidef_set_led_wlan "wlan58" "WLAN58" "mr1750:blue:wlan58" "phy0tpt" - ucidef_set_led_wlan "wlan24" "WLAN24" "mr1750:blue:wlan24" "phy1tpt" - ucidef_set_led_default "status-red" "Status (red)" "mr1750:red:wifi" "0" - ucidef_set_led_default "status-green" "Status (green)" "mr1750:green:wifi" "0" - ;; -mr900|\ -mr900v2) - ucidef_set_led_netdev "lan" "LAN" "mr900:blue:wan" "eth0" - ucidef_set_led_wlan "wlan24" "WLAN24" "mr900:blue:wlan24" "phy0tpt" - ucidef_set_led_wlan "wlan58" "WLAN58" "mr900:blue:wlan58" "phy1tpt" - ucidef_set_led_default "status-red" "Status (red)" "mr900:red:wifi" "0" - ucidef_set_led_default "status-green" "Status (green)" "mr900:green:wifi" "0" - ;; -mynet-n600) - ucidef_set_led_netdev "wan" "WAN" "wd:blue:internet" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "wd:green:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "wd:green:lan2" "switch0" "0x10" - ucidef_set_led_switch "lan3" "LAN3" "wd:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "wd:green:lan4" "switch0" "0x04" - ;; -mynet-rext) - ucidef_set_led_netdev "lan" "LAN" "wd:blue:ethernet" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "wd:blue:quality1" "wlan0" "1" "40" "0" "6" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "wd:blue:quality2" "wlan0" "30" "80" "-29" "5" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "wd:blue:quality3" "wlan0" "70" "100" "-69" "8" - ucidef_set_led_wlan "wlan" "WLAN" "wd:blue:wireless" "phy0tpt" - ;; -mzk-w04u) - ucidef_set_led_usbport "usb" "USB" "planex:green:usb" "usb1-port1" - ;; -mzk-w300nh) - ucidef_set_led_wlan "wlan" "WLAN" "planex:green:wlan" "phy0tpt" - ;; -nbg460n_550n_550nh) - ucidef_set_led_wlan "wlan" "WLAN" "nbg460n:green:wlan" "phy0tpt" - ;; -nbg6616) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wifi2g" "phy1tpt" - ucidef_set_led_wlan "wlan5" "WLAN5" "$board:green:wifi5g" "phy0tpt" - ucidef_set_led_usbport "usb1" "USB1" "$board:green:usb1" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB2" "$board:green:usb2" "usb2-port1" - ;; -nbg6716) - ucidef_set_led_netdev "wan" "WAN" "$board:white:internet" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:white:wifi2g" "phy1tpt" - ucidef_set_led_wlan "wlan5" "WLAN5" "$board:white:wifi5g" "phy0tpt" - ucidef_set_led_usbport "usb1" "USB1" "$board:white:usb1" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB2" "$board:white:usb2" "usb2-port1" - ;; -om2p|\ -om2p-hs|\ -om2p-hsv2|\ -om2p-hsv3|\ -om2p-hsv4|\ -om2p-lc|\ -om2pv2|\ -om2pv4) - ucidef_set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0" - ucidef_set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1" - ucidef_set_led_default "wlan-red" "WLAN (red)" "om2p:red:wifi" "0" - ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om2p:yellow:wifi" "0" - ucidef_set_led_default "wlan-green" "WLAN (green)" "om2p:green:wifi" "0" - ;; -om5p|\ -om5p-an) - ucidef_set_led_netdev "port1" "port1" "om5p:blue:wan" "eth0" - ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1" - ucidef_set_led_default "wlan-red" "WLAN (red)" "om5p:red:wifi" "0" - ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5p:yellow:wifi" "0" - ucidef_set_led_default "wlan-green" "WLAN (green)" "om5p:green:wifi" "0" - ;; -om5p-ac) - ucidef_set_led_netdev "port1" "port1" "om5pac:blue:lan" "eth0" - ucidef_set_led_netdev "port2" "port2" "om5pac:blue:wan" "eth1" - ucidef_set_led_default "wlan-red" "WLAN (red)" "om5pac:red:wifi" "0" - ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5pac:yellow:wifi" "0" - ucidef_set_led_default "wlan-green" "WLAN (green)" "om5pac:green:wifi" "0" - ;; -om5p-acv2) - ucidef_set_led_default "wlan-red" "WLAN (red)" "om5pac:red:wifi" "0" - ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5pac:yellow:wifi" "0" - ucidef_set_led_default "wlan-green" "WLAN (green)" "om5pac:green:wifi" "0" - ;; -omy-g1) - ucidef_set_led_wlan "wlan" "WLAN" "omy:green:wlan" "phy0tpt" - ucidef_set_led_netdev "wan" "WAN" "omy:green:wan" "eth0" - ucidef_set_led_netdev "lan" "LAN" "omy:green:lan" "eth1" - ;; -omy-x1) - ucidef_set_led_default "power" "POWER" "omy:green:power" "1" - ucidef_set_led_default "wan" "WAN" "omy:green:wan" "eth0" - ;; -pqi-air-pen) - ucidef_set_led_wlan "wlan" "WLAN" "pqi-air-pen:blue:wlan" "phy0tpt" - ucidef_set_led_default "wps" "WPS" "pqi-air-pen:blue:wps" "0" - ;; -qihoo-c301) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt" - ;; -r36a) - ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0" - ucidef_set_led_usbport "usb" "USB" "$board:blue:usb" "usb1-port1" - ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" - ;; -r602n|\ -t830|\ -zbt-we1526) - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - - case "$board" in - t830) - ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" - ;; - esac - ;; -r6100) - ucidef_set_led_netdev "wan" "WAN (green)" "netgear:green:wan" "eth0" - ucidef_set_led_usbport "usb" "USB" "netgear:blue:usb" "usb1-port1" - ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy1tpt" - ;; -rb-750) - ucidef_set_led_default "act" "act" "rb750:green:act" "1" - ucidef_set_led_netdev "port1" "port1" "rb750:green:port1" "eth1" - ucidef_set_led_switch "port2" "port2" "rb750:green:port2" "switch0" "0x10" - ucidef_set_led_switch "port3" "port3" "rb750:green:port3" "switch0" "0x08" - ucidef_set_led_switch "port4" "port4" "rb750:green:port4" "switch0" "0x04" - ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02" - ;; -rb-750-r2|\ -rb-750p-pbr2|\ -rb-750up-r2) - ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000" - ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0" - ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10" - ucidef_set_led_switch "port3" "port2" "rb:green:port3" "switch0" "0x08" - ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04" - ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02" - ;; -rb-911-2hn|\ -rb-911-5hn) - ucidef_set_led_netdev "eth" "ETH" "rb:green:eth" "eth0" - ;; -rb-931-2nd|\ -rb-941-2nd) - ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000" - ;; -rb-951ui-2nd|\ -rb-952ui-5ac2nd) - ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000" - ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0" - ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10" - ucidef_set_led_switch "port3" "port2" "rb:green:port3" "switch0" "0x08" - ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04" - ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "rb:blue:wlan" "phy0tpt" - ;; -rb-962uigs-5hact2hnt) - ucidef_set_led_timer "user" "USER/SFP" "rb:green:user" "1000" "1000" - ;; -rb-2011il|\ -rb-2011ils|\ -rb-2011l|\ -rb-2011uas|\ -rb-2011uas-2hnd|\ -rb-2011uias|\ -rb-2011uias-2hnd|\ -rb-2011uias-2hnd-r2) - ucidef_set_led_switch "eth6" "ETH6" "rb:green:eth6" "switch1" "0x20" - ucidef_set_led_switch "eth7" "ETH7" "rb:green:eth7" "switch1" "0x10" - ucidef_set_led_switch "eth8" "ETH8" "rb:green:eth8" "switch1" "0x08" - ucidef_set_led_switch "eth9" "ETH9" "rb:green:eth9" "switch1" "0x04" - ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02" - ;; -rb-lhg-5nd) - ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "rb:green:rssi0" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "rb:green:rssi1" "wlan0" "20" "100" "-19" "13" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "rb:green:rssi2" "wlan0" "40" "100" "-39" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "rb:green:rssi3" "wlan0" "60" "100" "-59" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "rb:green:rssi4" "wlan0" "80" "100" "-79" "13" - ;; -rb-map-2nd) - ucidef_set_led_switch "eth1" "WAN" "rb:green:eth1" "switch0" "0x02" - ucidef_set_led_switch "eth2" "LAN" "rb:green:eth2" "switch0" "0x04" - ucidef_set_led_gpio "poe" "POE" "rb:red:poe_out" "14" "0" - ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt" - ;; -rb-mapl-2nd) - ucidef_set_led_default "power" "POWER" "rb:green:power" "1" - ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt" - ;; -rb-wap-2nd) - ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000" - ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt" - ;; -rb-wapr-2nd) - ucidef_set_led_wlan "wlan" "WLAN" "rb:green:user" "phy0tpt" - ;; -re355|\ -re450) - ucidef_set_led_netdev "lan_data" "LAN Data" "$board:green:lan_data" "eth0" "tx rx" - ucidef_set_led_netdev "lan_link" "LAN Link" "$board:green:lan_link" "eth0" "link" - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt" - ;; -rme-eg200) - ucidef_set_led_netdev "wan" "WAN" "eg200:red:eth0" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "eg200:red:wlan" "phy0tpt" - ucidef_set_led_oneshot "modbus" "Modbus" "eg200:red:modbus" "100" "33" - ucidef_set_led_default "etactica" "etactica" "eg200:red:etactica" "ignore" - ;; -rocket-m-ti) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssiverylow" "RSSIVERYLOW" "ubnt:green:link1" "wlan0" "1" "100" - ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:green:link2" "wlan0" "18" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:green:link3" "wlan0" "34" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link4" "wlan0" "51" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link5" "wlan0" "67" "100" - ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "ubnt:green:link6" "wlan0" "84" "100" - ;; -rut900) - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04" - ;; -smart-300) - ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0" - ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "nc-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "nc-link:green:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "nc-link:green:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "nc-link:green:wlan" "phy0tpt" - ;; -som9331) - ucidef_set_led_netdev "wan" "WAN" "$board:orange:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "$board:orange:lan1" "switch0" "0x08" - ucidef_set_led_switch "lan2" "LAN2" "$board:orange:lan2" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt" - ucidef_set_led_usbport "usb" "USB" "$board:green:system" "usb1-port1" - ;; -sr3200) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" - ;; -tellstick-znet-lite) - ucidef_set_led_netdev "lan_act" "LANACT" "tellstick:green:lan" "eth0" "tx rx" - ucidef_set_led_netdev "lan_link" "LANLINK" "tellstick:orange:lan" "eth0" "link" - ;; -tew-712br) - ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "trendnet:green:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "trendnet:green:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "LAN3" "trendnet:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "trendnet:green:lan4" "switch0" "0x10" - ucidef_set_led_wlan "wlan" "WLAN" "trendnet:green:wlan" "phy0tpt" - ;; -tew-732br) - ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1" - ;; -tew-823dru) - ucidef_set_led_netdev "wan" "WAN" "trendnet:green:planet" "eth0" - ;; -tl-mr11u|\ -tl-mr3020|\ -tl-mr3040|\ -tl-mr3040-v2) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" - ;; -tl-mr3220|\ -tl-mr3420) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" - ;; -tl-mr3220-v2|\ -tl-wr741nd-v4) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - - case "$board" in - tl-mr3220-v2) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" - ;; - esac - ;; -tl-mr3420-v2|\ -tl-wr841n-v8|\ -tl-wr842n-v2|\ -tl-wr941nd-v5) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - - case "$board" in - tl-mr3420-v2|\ - tl-wr842n-v2) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" - ;; - esac - ;; -tl-mr6400) - ucidef_set_led_netdev "lan" "LAN" "tp-link:white:lan" "eth0" - ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1" - ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:white:wlan" "phy0tpt" - ;; -tl-wa7210n-v2) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:signal1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:signal2" "wlan0" "26" "100" "-25" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:signal3" "wlan0" "51" "100" "-50" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:signal4" "wlan0" "76" "100" "-75" "13" - ;; -tl-wa750re) - ucidef_set_led_netdev "lan" "LAN" "tp-link:orange:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:orange:wlan" "phy0tpt" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:orange:signal1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:orange:signal2" "wlan0" "20" "100" "-19" "13" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "tp-link:orange:signal3" "wlan0" "40" "100" "-39" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:orange:signal4" "wlan0" "60" "100" "-59" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:orange:signal5" "wlan0" "80" "100" "-79" "13" - ;; -tl-wa801nd-v3) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ;; -tl-wa850re|\ -tl-wa850re-v2) - ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:blue:signal1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:blue:signal2" "wlan0" "20" "100" "-19" "13" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "tp-link:blue:signal3" "wlan0" "40" "100" "-39" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:blue:signal4" "wlan0" "60" "100" "-59" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:blue:signal5" "wlan0" "80" "100" "-79" "13" - ;; -tl-wa701nd-v2|\ -tl-wa801nd-v2|\ -tl-wa830re-v2|\ -tl-wa860re|\ -tl-wa901nd-v3|\ -tl-wa901nd-v4|\ -tl-wa901nd-v5) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ;; -tl-wa901nd) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" - ;; -tl-wa901nd-v2|\ -tl-wr941nd|\ -tl-wr1041n-v2) - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ;; -tl-wdr3320-v2) - ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:green:wlan5g" "phy0tpt" - ;; -tl-wdr3500) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy0tpt" - ;; -tl-wdr4300) - ucidef_set_led_usbport "usb1" "USB1" "tp-link:green:usb1" "1-1-port1" - ucidef_set_led_usbport "usb2" "USB2" "tp-link:green:usb2" "1-1-port2" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt" - ;; -tl-wdr4900-v2) - ucidef_set_led_usbport "usb1" "USB1" "tp-link:green:usb1" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB2" "tp-link:green:usb2" "usb2-port1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy1tpt" - ;; -tl-wdr6500-v2|\ -tl-wr741nd) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10" - ;; -tl-wpa8630) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1" - ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0" - ;; -tl-wr740n-v6|\ -tl-wr841n-v9|\ -tl-wr841n-v11|\ -tl-wr842n-v3) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - - case "$board" in - tl-wr842n-v3) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" - ;; - esac - ;; -tl-wr802n-v1) - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt" - ;; -tl-wr802n-v2) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:system" "phy0tpt" - ;; -tl-wr902ac-v1) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" - ;; -tl-wr940n-v4|\ -tl-wr941nd-v6) - ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:blue:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:blue:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:blue:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:blue:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt" - ;; -tl-wr840n-v2|\ -tl-wr840n-v3) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ;; -tl-wr940n-v6) - ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0" - ;; -tl-wr942n-v1) - ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ucidef_set_led_usbport "usb1" "USB1" "$board:green:usb1" "1-1-port2" - ucidef_set_led_usbport "usb2" "USB2" "$board:green:usb2" "1-1-port1" - ;; -tl-wr1043nd|\ -tl-wr1043nd-v2) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ;; -tl-wr1043n-v5|\ -tl-wr1043nd-v4) - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - - case "$board" in - tl-wr1043nd-v4) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1" - ;; - esac - ;; -tl-wr2543n) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy0tpt" - ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1" - ;; -tube2h) - ucidef_set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "signal1" "SIGNAL1" "alfa:red:signal1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "signal2" "SIGNAL2" "alfa:orange:signal2" "wlan0" "26" "100" "-25" "13" - ucidef_set_led_rssi "signal3" "SIGNAL3" "alfa:green:signal3" "wlan0" "51" "100" "-50" "13" - ucidef_set_led_rssi "signal4" "SIGNAL4" "alfa:green:signal4" "wlan0" "76" "100" "-75" "13" - ;; -wam250) - ucidef_set_led_netdev "lan" "LAN" "$board:white:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:white:wlan" "phy0tpt" - ;; -wndap360) - ucidef_set_led_power "power" "POWER GREEN" "netgear:green:power" "1" - ;; -wndr3700) - ucidef_set_led_default "wan" "WAN LED (green)" "netgear:green:wan" "0" - ucidef_set_led_usbport "usb" "USB" "netgear:green:usb" "usb1-port1" - ;; -wi2a-ac200i) - ucidef_set_led_default "power" "Power (green)" "nokia:green:power" "1" - ucidef_set_led_default "wan" "Ethernet LED (green)" "nokia:green:wan" "1" - ucidef_set_led_wlan "wlan5g" "WLAN" "nokia:green:wlan-5g" "phy0tpt" - ucidef_set_led_wlan "wlan2g" "WLAN" "nokia:green:wlan-2g" "phy1tpt" - ;; -wndr3700v4|\ -wndr4300) - ucidef_set_led_switch "wan-amber" "WAN (amber)" "netgear:amber:wan" "switch0" "0x20" - ucidef_set_led_usbport "usb" "USB" "netgear:green:usb" "usb1-port1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "netgear:green:wlan2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "netgear:blue:wlan5g" "phy1tpt" - ;; -whr-g301n|\ -whr-hp-g300n|\ -whr-hp-gn) - ucidef_set_led_netdev "wan" "WAN" "buffalo:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "buffalo:green:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "buffalo:green:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "LAN3" "buffalo:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "buffalo:green:lan4" "switch0" "0x10" - ;; -wifi-pineapple-nano) - ucidef_set_led_wlan "wlan0" "WLAN0" "$board:blue:system" "phy0tpt" - ;; -wlae-ag300n) - ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0" - ;; -wnr1000-v2|\ -wnr2000-v3) - ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0" - ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0" - ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt" - ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04" - ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04" - ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04" - ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10" "0x04" - ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" "0x02" - ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02" - ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02" - ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02" - ;; -wnr2000-v4) - ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0" - ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0" - ucidef_set_led_switch "lan1" "LAN1" "netgear:amber:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "netgear:amber:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "LAN3" "netgear:amber:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "netgear:amber:lan4" "switch0" "0x10" - ucidef_set_led_usbport "usb" "USB" "netgear:amber:status" "usb1-port1" - ;; -wnr2200) - ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0" - ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0" - ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt" - ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04" - ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04" - ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04" - ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10" "0x04" - ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" "0x02" - ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02" - ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02" - ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02" - ucidef_set_led_usbport "usb" "USB" "netgear:green:usb" "usb1-port1" - ;; -wnr612-v2) - ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "netgear:green:wlan" "phy0tpt" - ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f" - ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f" - ;; -wpn824n) - ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt" - ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" - ucidef_set_led_default "lan1green" "LAN1 (green)" "netgear:green:lan1" "0" - ucidef_set_led_default "lan2green" "LAN2 (green)" "netgear:green:lan2" "0" - ucidef_set_led_default "lan3green" "LAN3 (green)" "netgear:green:lan3" "0" - ucidef_set_led_default "lan4green" "LAN4 (green)" "netgear:green:lan4" "0" - ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0" - ucidef_set_led_default "wps1" "WPS1" "netgear:blue:wps1" "0" - ucidef_set_led_default "wps2" "WPS2" "netgear:blue:wps2" "0" - ucidef_set_led_default "status" "STATUS" "netgear:amber:status" "0" - ucidef_set_led_default "test" "TEST" "netgear:amber:test" "0" - ;; -wzr-hp-ag300h) - ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0" - ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "buffalo:amber:band2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "buffalo:amber:band5g" "phy1tpt" - ucidef_set_led_usbport "usb" "USB" "buffalo:green:usb" "usb1-port1" - ;; -wzr-hp-g300nh) - ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt" - ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1" - ucidef_set_led_usbport "usb" "USB" "buffalo:blue:usb" "usb1-port1" - ;; -wzr-hp-g300nh2|\ -wzr-hp-g450h) - ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt" - ;; -xd3200) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt" - ;; -z1) - ucidef_set_led_netdev "wlan1" "WLAN1" "$board:blue:tricolor0" "wlan1" - ;; -zcn-1523h-2) - ucidef_set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0" - ;; -zcn-1523h-5) - ucidef_set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0" - ucidef_set_led_netdev "lan2" "lan2" "zcn-1523h:green:lan2" "eth1" - ;; -esac - -board_config_flush - -exit 0 diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network deleted file mode 100755 index 1487ff58de..0000000000 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ /dev/null @@ -1,711 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2011-2015 OpenWrt.org -# - -. /lib/functions/system.sh -. /lib/functions/uci-defaults.sh - -ar71xx_setup_interfaces() -{ - local board="$1" - - case "$board" in - airgatewaypro) - ucidef_add_switch "switch0" \ - "0@eth0" "4:lan" "5:wan" - ;; - airrouter|\ - ap121|\ - ap121-mini|\ - ap96|\ - dir-600-a1|\ - dir-615-c1|\ - dir-615-e1|\ - dir-615-e4|\ - hiwifi-hc6361|\ - ja76pf|\ - mc-mac1200r|\ - minibox-v1|\ - mynet-n600|\ - oolite-v1|\ - oolite-v5.2|\ - oolite-v5.2-dev|\ - qihoo-c301|\ - r602n|\ - rb-750|\ - rb-751|\ - som9331|\ - t830|\ - tew-632brp|\ - tew-712br|\ - tew-732br|\ - tl-mr3220|\ - tl-mr3420|\ - tl-wdr3320-v2|\ - tl-wdr3500|\ - tl-wr740n-v6|\ - tl-wr840n-v2|\ - tl-wr840n-v3|\ - tl-wr841n-v11|\ - tl-wr841n-v9|\ - tl-wr842n-v3|\ - whr-g301n|\ - whr-hp-g300n|\ - whr-hp-gn|\ - wzr-hp-ag300h|\ - zbt-we1526) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" - ;; - alfa-ap120c|\ - all0305|\ - antminer-s1|\ - antminer-s3|\ - antrouter-r1|\ - ap121f|\ - ap91-5g|\ - aw-nr580|\ - bullet-m|\ - bullet-m-xw|\ - c-55|\ - cap324|\ - cap4200ag|\ - cf-e380ac-v1|\ - cf-e380ac-v2|\ - cpe210-v2|\ - cpe210-v3|\ - cpe510-v2|\ - dr342|\ - eap120|\ - eap300v2|\ - eap7660d|\ - el-mini|\ - fritz300e|\ - fritz450e|\ - gl-usb150|\ - hiveap-121|\ - koala|\ - lbe-m5|\ - loco-m-xw|\ - mr12|\ - mr16|\ - mr1750|\ - mr1750v2|\ - mr18|\ - mr600|\ - mr600v2|\ - mr900|\ - mr900v2|\ - mynet-rext|\ - pqi-air-pen|\ - rb-411|\ - rb-411u|\ - rb-911-2hn|\ - rb-911-5hn|\ - rb-911g-2hpnd|\ - rb-911g-5hpacd|\ - rb-911g-5hpnd|\ - rb-912uag-2hpnd|\ - rb-912uag-5hpnd|\ - rb-921gs-5hpacd-r2|\ - rb-922uags-5hpacd|\ - rb-lhg-5nd|\ - rb-mapl-2nd|\ - rb-sxt2n|\ - rb-sxt-2nd-r3|\ - rb-sxt5n|\ - rb-wap-2nd|\ - rb-wapr-2nd|\ - rb-wapg-5hact2hnd|\ - re355|\ - re450|\ - rocket-m-xw|\ - sc300m |\ - tl-mr10u|\ - tl-mr11u|\ - tl-mr12u|\ - tl-mr13u|\ - tl-mr3020|\ - tl-mr3040|\ - tl-mr3040-v2|\ - tl-wa701nd-v2|\ - tl-wa7210n-v2|\ - tl-wa750re|\ - tl-wa801nd-v2|\ - tl-wa830re-v2|\ - tl-wa850re|\ - tl-wa850re-v2|\ - tl-wa855re-v1|\ - tl-wa901nd|\ - tl-wa901nd-v2|\ - tl-wa901nd-v3|\ - tl-wa901nd-v4|\ - tl-wa901nd-v5|\ - tl-wr703n|\ - tl-wr802n-v1|\ - tl-wr802n-v2|\ - tl-wr902ac-v1|\ - ts-d084|\ - tube2h|\ - unifi|\ - unifiac-lite|\ - wi2a-ac200i|\ - wifi-pineapple-nano|\ - wndap360|\ - wp543) - ucidef_set_interface_lan "eth0" - ;; - a40|\ - a60|\ - alfa-ap96|\ - alfa-nx|\ - dr344|\ - gl-ar150|\ - gl-ar300m|\ - gl-domino|\ - gl-inet|\ - gl-mifi|\ - jwap003|\ - om2p-hsv4|\ - om2pv4|\ - pb42|\ - pb44|\ - rb-951ui-2hnd|\ - routerstation|\ - tl-wr710n|\ - tl-wr720n-v3|\ - tl-wr810n|\ - tl-wr810n-v2|\ - wpe72|\ - wrtnode2q) - ucidef_set_interfaces_lan_wan "eth1" "eth0" - ;; - all0258n|\ - all0315n|\ - dlan-hotspot|\ - dlan-pro-500-wp|\ - ja76pf2|\ - rocket-m-ti|\ - ubnt-unifi-outdoor) - ucidef_set_interface_lan "eth0 eth1" - ;; - wzr-hp-g300nh2) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan" - ;; - ap132|\ - ap136|\ - ap152|\ - rb-750gl|\ - rb-751g|\ - rb-951g-2hnd|\ - rb-962uigs-5hact2hnt|\ - wlr8100|\ - wzr-hp-g450h) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" - ;; - ap135-020|\ - ap136-020|\ - bhr-4grv2|\ - tew-823dru|\ - tl-wr1043nd-v2|\ - wzr-450hp2) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0" - ;; - ap136-010|\ - ap147-010|\ - nbg6616|\ - nbg6716) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1" - ;; - ap143|\ - rb-433|\ - rb-433u) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "5@eth1" - ;; - archer-c5|\ - archer-c7|\ - tl-wdr4900-v2) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2" - ucidef_add_switch "switch0" \ - "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan" - ;; - archer-c25-v1|\ - archer-c60-v1|\ - archer-c60-v2|\ - rb-750-r2|\ - rb-750p-pbr2|\ - rb-750up-r2|\ - rb-951ui-2nd|\ - rb-952ui-5ac2nd) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" - ;; - archer-c58-v1|\ - archer-c59-v1|\ - archer-c59-v2|\ - fritz4020|\ - rb-450g) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" - ;; - arduino-yun|\ - dir-505-a1|\ - tl-wa801nd-v3) - ucidef_set_interface_lan "eth1" - ;; - bsb) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan" "3:lan" - ;; - c-60) - ucidef_add_switch "switch0" \ - "0@eth0" "3:wan" "4:lan" - ;; - rme-eg200) - ucidef_set_interface_lan "eth0" "dhcp" - ;; - cf-e375ac|\ - rb-map-2nd) - ucidef_add_switch "switch0" \ - "0@eth0" "1:wan" "2:lan" - ;; - cf-e385ac) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "1:wan" "6@eth1" - ;; - cpe210|\ - cpe510|\ - wbs210|\ - wbs510) - ucidef_add_switch "switch0" \ - "0@eth0" "5:lan" "4:wan" - ;; - cr3000) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" - ;; - cr5000|\ - dgl-5500-a1|\ - dhp-1565-a1|\ - dir-825-c1|\ - dir-835-a1|\ - esr900|\ - mynet-n750|\ - sr3200) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" - ;; - tl-wr1043n-v5) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" - ;; - dap-2695-a1) - ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1" - ;; - rb-931-2nd) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:3" "2:lan:2" "3:wan:1" - ;; - rb-941-2nd) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:wan:1" - ;; - db120|\ - rb-2011il|\ - rb-2011ils|\ - rb-2011l|\ - rb-2011uas|\ - rb-2011uas-2hnd|\ - rb-2011uias|\ - rb-2011uias-2hnd|\ - rb-2011uias-2hnd-r2) - case "$board" in - rb-2011ils|\ - rb-2011uas*|\ - rb-2011uias|\ - rb-2011uias-2hnd|\ - rb-2011uias-2hnd-r2) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" "6:sfp" - ;; - *) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" - ;; - esac - - ucidef_add_switch "switch1" \ - "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" - ;; - dir-615-i1|\ - omy-g1|\ - r6100|\ - smart-300|\ - tl-wdr6500-v2|\ - tl-wr940n-v4|\ - tl-wr940n-v6|\ - tl-wr941nd-v6|\ - wnr1000-v2|\ - wnr2000-v4|\ - wnr2200|\ - wnr612-v2|\ - wpn824n) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" - ;; - tl-mr6400) - ucidef_set_interfaces_lan_wan "eth0.1 eth1" "usb0" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" - ;; - dir-825-b1|\ - nbg460n_550n_550nh|\ - tew-673gru|\ - wzr-hp-g300nh) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0" - ;; - dlan-pro-1200-ac) - ucidef_set_interface_lan "eth0" - ucidef_add_switch "switch0" \ - "0u@eth0" "2:lan" "3:lan" "4:lan" - ucidef_add_switch_attr "switch0" "enable" "false" - ;; - e1700ac-v2|\ - e750g-v8|\ - unifiac-pro|\ - xd3200) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:wan" - ;; - e558-v2) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2" - ucidef_add_switch "switch0" \ - "0@eth1" "4:lan" "5:lan" "6@eth0" "3:wan" - ;; - ebr-2310-c1) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" - ;; - el-m150) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "3@eth1" - ;; - dir-869-a1|\ - epg5000|\ - esr1750|\ - tl-wr1043nd-v4|\ - wndr3700v4|\ - wndr4300) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" - ;; - ew-balin) - ucidef_set_interface "usb2" ifname "usb0" protocol "static" - ucidef_add_switch "switch0" \ - "0@eth0" "5:lan:4" "4:lan:5" "3:wan" - ;; - ew-dorin) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:wan" - ;; - ew-dorin-router) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:lan" - ;; - dw33d|\ - f9k1115v2) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2" - ucidef_add_switch "switch0" \ - "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "0@eth0" "1:wan" - ;; - gl-ar300|\ - wnr2000-v3) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" - ;; - gl-ar750|\ - rb-435g) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan" "2:lan" - ;; - gl-ar750s) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:2" "3:lan:1" "1:wan" - ;; - jwap230) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "5:wan" "6@eth1" - ;; - nanostation-m-xw) - ucidef_add_switch "switch0" \ - "0@eth0" "5:lan" "1:wan" - ;; - onion-omega) - ucidef_set_interface_lan "wlan0" - ;; - rb-450) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth1" - ;; - routerstation-pro) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1" - ;; - rb-493g) - ucidef_set_interfaces_lan_wan "eth0.1 eth1.1" "eth1.2" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" - ucidef_add_switch "switch1" \ - "0@eth1" "1:lan:4" "2:lan:1" "3:lan:3" "4:lan:2" "5:wan" - ;; - rut900) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" - ;; - tellstick-znet-lite) - ucidef_set_interface_wan "eth0" - ucidef_set_interface "wlan" ifname "wlan0" protocol "dhcp" - ;; - tl-mr3420-v2|\ - tl-wr841n-v8|\ - tl-wr842n-v2|\ - tl-wr941nd-v5|\ - tl-wr942n-v1) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" - ;; - archer-c7-v4|\ - archer-c7-v5|\ - tl-wdr4300|\ - tl-wr1041n-v2) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" - ;; - tl-wpa8630) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4" - ;; - tl-wr1043nd) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" - ;; - tl-wr2543n) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0" - ;; - tl-mr3220-v2|\ - tl-wr741nd-v4) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" - ;; - tl-wr841n-v1|\ - tl-wr941nd) - ucidef_set_interface "eth" ifname "eth0" - ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" - ;; - tl-wr741nd|\ - tl-wr841n-v7) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" - ;; - uap-pro|\ - wpj342) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:wan" - ;; - wndr3700|\ - wndr3700v2|\ - wndr3800|\ - wndr3800ch) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" - - ucidef_add_switch_attr "switch0" "blinkrate" 2 - ucidef_add_switch_port_attr "switch0" 1 led 6 - ucidef_add_switch_port_attr "switch0" 2 led 9 - ucidef_add_switch_port_attr "switch0" 5 led 2 - ;; - wpj344) - ucidef_add_switch "switch0" \ - "0@eth0" "3:lan" "2:wan" - ;; - wpj558) - ucidef_add_switch "switch0" \ - "5:lan" "1:wan" "6@eth0" - ;; - wpj563) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:wan" - ;; - wrt160nl) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth0" - ;; - wzr-hp-g450h) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:1 3:lan:2 4:lan:3 5:lan:4" "1:wan" - ;; - z1) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:wan" - ;; - ens202ext) - ucidef_set_interfaces_lan_wan "eth1.1" "eth1.2" - ucidef_add_switch "switch0" \ - "0@eth1" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" - ;; - *) - ucidef_set_interfaces_lan_wan "eth0" "eth1" - ;; - esac -} - -ar71xx_setup_macs() -{ - local board="$1" - local lan_mac="" - local wan_mac="" - - case $board in - archer-c7-v4) - base_mac=$(mtd_get_mac_binary config 0x8) - wan_mac=$(macaddr_add "$base_mac" 1) - ;; - archer-c7-v5) - base_mac=$(mtd_get_mac_binary info 0x8) - wan_mac=$(macaddr_add "$base_mac" 1) - ;; - dgl-5500-a1|\ - dir-825-c1) - wan_mac=$(mtd_get_mac_ascii nvram "wan_mac") - ;; - dhp-1565-a1|\ - dir-835-a1|\ - wndr3700v4|\ - wndr4300) - lan_mac=$(mtd_get_mac_binary caldata 0x0) - wan_mac=$(mtd_get_mac_binary caldata 0x6) - ;; - dir-869-a1|\ - mynet-n750) - wan_mac=$(mtd_get_mac_ascii devdata "wanmac") - ;; - esr900) - wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr") - ;; - fritz300e) - lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) - ;; - tl-wdr4300) - base_mac=$(mtd_get_mac_binary u-boot 0x1fc00) - wan_mac=$(macaddr_add "$base_mac" 1) - ;; - tl-wr1043n-v5|\ - tl-wr1043nd-v4) - lan_mac=$(mtd_get_mac_binary product-info 0x8) - wan_mac=$(macaddr_add "$lan_mac" 1) - ;; - wlr8100) - lan_mac=$(mtd_get_mac_ascii u-boot-env "ethaddr") - wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr") - ;; - wpj344|\ - wpj558) - wan_mac=$(mtd_get_mac_binary u-boot 0x2e018) - ;; - esac - - [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac - [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac -} - -ar71xx_setup_ar8xxx_switch() -{ - local board="$1" - - case $board in - ap147-010|\ - archer-c25-v1|\ - archer-c58-v1|\ - archer-c59-v1|\ - archer-c59-v2|\ - archer-c60-v1|\ - archer-c60-v2|\ - archer-c7-v4|\ - archer-c7-v5|\ - cf-e375ac|\ - cf-e385ac|\ - cr3000|\ - dhp-1565-a1|\ - mynet-n600|\ - rb-2011il|\ - rb-2011ils|\ - rb-2011l|\ - rb-2011uas|\ - rb-2011uas-2hnd|\ - rb-2011uias|\ - rb-2011uias-2hnd|\ - rb-2011uias-2hnd-r2|\ - rb-750|\ - rb-750p-pbr2|\ - rb-750-r2|\ - rb-750up-r2|\ - rb-951ui-2nd|\ - rb-952ui-5ac2nd|\ - rb-map-2nd|\ - tl-wr1043nd-v4|\ - tl-wr1043n-v5|\ - wndr3700v4|\ - wndr3700v4|\ - wndr4300|\ - wnr1000-v2|\ - wnr2000-v3|\ - wnr2200|\ - wnr612-v2|\ - wpn824n) - ucidef_set_ar8xxx_switch_mib "switch0" 0 500 - ;; - esac -} - -board_config_update -board=$(board_name) -ar71xx_setup_interfaces $board -ar71xx_setup_macs $board -ar71xx_setup_ar8xxx_switch $board -board_config_flush - -exit 0 diff --git a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches deleted file mode 100755 index 3bb2f635a3..0000000000 --- a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2015 OpenWrt.org -# - -. /lib/functions/uci-defaults.sh - -board_config_update - -board=$(board_name) - -case "$board" in -cpe210|\ -cpe510|\ -wbs210|\ -wbs510) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20" - ;; -nanostation-m) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "8" - ;; -nanostation-m-xw) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "2" - ;; -rb-912uag-2hpnd|\ -rb-912uag-5hpnd) - ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "61" "1" - ;; -rb-750up-r2|\ -rb-951ui-2nd|\ -rb-952ui-5ac2nd) - ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "45" "1" - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14" - ;; -rb-750p-pbr2) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14" - ;; -esac - -board_config_flush - -exit 0 diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh deleted file mode 100644 index 1a92ad927d..0000000000 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ /dev/null @@ -1,599 +0,0 @@ -#!/bin/sh -# Copyright (C) 2009-2013 OpenWrt.org - -. /lib/functions.sh -. /lib/functions/leds.sh - -get_status_led() { - local board=$(board_name) - - case $board in - a40) - status_led="a40:green:status" - ;; - a60) - status_led="a60:green:status" - ;; - alfa-nx) - status_led="alfa:green:led_8" - ;; - all0305) - status_led="eap7660d:green:ds4" - ;; - antminer-s1|\ - antminer-s3|\ - antminer-r1|\ - e1700ac-v2|\ - e558-v2|\ - e600gac-v2|\ - e750a-v4|\ - e750g-v8|\ - eap120|\ - minibox-v1|\ - minibox-v3.2|\ - packet-squirrel|\ - som9331|\ - sr3200|\ - tl-wr802n-v2|\ - xd3200) - status_led="$board:green:system" - ;; - ap121f) - status_led="$board:green:vpn" - ;; - ap132|\ - ap531b0|\ - cpe505n|\ - db120|\ - dr342|\ - dr344|\ - rut900|\ - tew-632brp|\ - tl-wr942n-v1|\ - wpj344|\ - zbt-we1526) - status_led="$board:green:status" - ;; - ap136-010|\ - ap136-020) - status_led="ap136:green:status" - ;; - ap147-010) - status_led="ap147:green:status" - ;; - ap135-020) - status_led="ap135:green:status" - ;; - archer-c25-v1|\ - archer-c58-v1|\ - archer-c59-v1|\ - archer-c59-v2|\ - archer-c60-v1|\ - archer-c60-v2|\ - archer-c7-v4|\ - archer-c7-v5|\ - fritz300e|\ - fritz4020|\ - fritz450e|\ - gl-ar750s|\ - gl-usb150|\ - mr12|\ - mr16|\ - nbg6616|\ - sc1750|\ - sc450|\ - tl-wpa8630|\ - tl-wr902ac-v1) - status_led="$board:green:power" - ;; - tl-mr10u|\ - tl-mr12u|\ - tl-mr13u|\ - tl-wdr4300|\ - tl-wdr4900-v2|\ - tl-wr703n|\ - tl-wr710n|\ - tl-wr720n-v3|\ - tl-wr802n-v1|\ - tl-wr810n|\ - tl-wr810n-v2|\ - tl-wr940n-v4|\ - tl-wr941nd-v6) - status_led="tp-link:blue:system" - ;; - ap90q|\ - cpe830|\ - cpe870|\ - gl-ar300m|\ - gl-inet|\ - gl-mifi) - status_led="$board:green:lan" - ;; - ap91-5g|\ - n5q) - status_led="$board:green:signal4" - ;; - ap96) - status_led="$board:green:led2" - ;; - aw-nr580) - status_led="$board:green:ready" - ;; - bhr-4grv2|\ - wzr-hp-ag300h|\ - wzr-hp-g300nh2) - status_led="buffalo:red:diag" - ;; - bsb) - status_led="$board:red:sys" - ;; - bullet-m|\ - bullet-m-xw|\ - loco-m-xw|\ - nano-m|\ - nanostation-m|\ - nanostation-m-xw|\ - rocket-m|\ - rocket-m-xw) - status_led="ubnt:green:link4" - ;; - bxu2000n-2-a1) - status_led="bhu:green:status" - ;; - cap324) - status_led="pcs:green:power" - ;; - c-55|\ - c-60) - status_led="$board:green:pwr" - ;; - cap4200ag) - status_led="senao:green:pwr" - ;; - cf-e316n-v2|\ - cf-e520n|\ - cf-e530n) - status_led="$board:blue:wan" - ;; - cf-e320n-v2) - status_led="$board:blue:wlan" - ;; - cf-e375ac|\ - cf-e380ac-v1|\ - cf-e380ac-v2|\ - cf-e385ac) - status_led="$board:blue:wlan2g" - ;; - cpe510) - status_led="tp-link:green:link4" - ;; - cr3000|\ - cr5000) - status_led="pcs:amber:power" - ;; - dap-1330-a1|\ - dgl-5500-a1|\ - dhp-1565-a1|\ - dir-505-a1|\ - dir-600-a1|\ - dir-615-e1|\ - dir-615-i1|\ - dir-615-e4) - status_led="d-link:green:power" - ;; - dir-615-c1) - status_led="d-link:green:status" - ;; - dir-825-b1) - status_led="d-link:orange:power" - ;; - dir-825-c1|\ - dir-835-a1) - status_led="d-link:amber:power" - ;; - dir-869-a1) - status_led="d-link:white:status" - ;; - dlan-hotspot) - status_led="devolo:green:wifi" - ;; - dlan-pro-500-wp) - status_led="devolo:green:wlan-2g" - ;; - dlan-pro-1200-ac) - status_led="devolo:status:wlan" - ;; - dr531) - status_led="$board:green:sig4" - ;; - dragino2|\ - oolite-v1) - status_led="$board:red:system" - ;; - dw33d|\ - r36a) - status_led="$board:blue:status" - ;; - e600g-v2|\ - oolite-v5.2-dev|\ - ts-d084|\ - wifi-pineapple-nano) - status_led="$board:blue:system" - ;; - eap300v2) - status_led="engenius:blue:power" - ;; - ens202ext|\ - esr900) - status_led="engenius:amber:power" - ;; - eap7660d) - status_led="$board:green:ds4" - ;; - el-m150|\ - el-mini) - status_led="easylink:green:system" - ;; - ew-balin) - status_led="balin:green:status" - ;; - ew-dorin|\ - ew-dorin-router) - status_led="dorin:green:status" - ;; - f9k1115v2) - status_led="belkin:blue:status" - ;; - epg5000|\ - esr1750) - status_led="$board:amber:power" - ;; - gl-ar750|\ - hiveap-121|\ - nbg6716|\ - wam250) - status_led="$board:white:power" - ;; - hiwifi-hc6361) - status_led="hiwifi:blue:system" - ;; - hornet-ub|\ - hornet-ub-x2) - status_led="alfa:blue:wps" - ;; - ja76pf|\ - ja76pf2) - status_led="jjplus:green:led1" - ;; - jwap230) - status_led="$board:green:led1" - ;; - koala) - status_led="$board:blue:sys" - ;; - lan-turtle) - status_led="$board:orange:system" - ;; - lbe-m5) - status_led="ubnt:green:sys" - ;; - ls-sr71) - status_led="ubnt:green:d22" - ;; - mc-mac1200r) - status_led="mercury:green:system" - ;; - mr18|\ - z1) - status_led="$board:green:tricolor0" - ;; - mr600) - status_led="$board:orange:power" - ;; - mr600v2) - status_led="mr600:blue:power" - ;; - mr1750|\ - mr1750v2) - status_led="mr1750:blue:power" - ;; - mr900|\ - mr900v2) - status_led="mr900:blue:power" - ;; - mynet-n600|\ - mynet-n750|\ - mynet-rext) - status_led="wd:blue:power" - ;; - mzk-w04nu|\ - mzk-w300nh) - status_led="planex:green:status" - ;; - nbg460n_550n_550nh) - status_led="nbg460n:green:power" - ;; - om2p|\ - om2p-hs|\ - om2p-hsv2|\ - om2p-hsv3|\ - om2p-hsv4|\ - om2p-lc|\ - om2pv2|\ - om2pv4) - status_led="om2p:blue:power" - ;; - om5p|\ - om5p-an) - status_led="om5p:blue:power" - ;; - om5p-ac|\ - om5p-acv2) - status_led="om5pac:blue:power" - ;; - omy-g1) - status_led="omy:green:wlan" - ;; - omy-x1) - status_led="omy:green:power" - ;; - onion-omega) - status_led="onion:amber:system" - ;; - pb44) - status_led="$board:amber:jump1" - ;; - r602n) - status_led="$board:green:wan" - ;; - rb-2011il|\ - rb-2011ils|\ - rb-2011l|\ - rb-2011uas|\ - rb-2011uas-2hnd) - status_led="rb:green:usr" - ;; - rb-411|\ - rb-411u|\ - rb-433|\ - rb-433u|\ - rb-450|\ - rb-450g|\ - rb-493) - status_led="rb4xx:yellow:user" - ;; - rb-750) - status_led="rb750:green:act" - ;; - rb-750-r2|\ - rb-750p-pbr2|\ - rb-750up-r2|\ - rb-911-2hn|\ - rb-911-5hn|\ - rb-911g-2hpnd|\ - rb-911g-5hpacd|\ - rb-911g-5hpnd|\ - rb-931-2nd|\ - rb-941-2nd|\ - rb-951ui-2nd|\ - rb-952ui-5ac2nd|\ - rb-962uigs-5hact2hnt|\ - rb-lhg-5nd|\ - rb-map-2nd|\ - rb-mapl-2nd|\ - rb-sxt-2nd-r3|\ - rb-wap-2nd|\ - rb-wapr-2nd) - status_led="rb:green:user" - ;; - rb-951ui-2hnd) - status_led="rb:green:act" - ;; - rb-912uag-2hpnd|\ - rb-912uag-5hpnd|\ - rb-sxt2n|\ - rb-sxt5n|\ - rb-wapg-5hact2hnd) - status_led="rb:green:power" - ;; - re355|\ - re450|\ - sc300m) - status_led="$board:blue:power" - ;; - rocket-m-ti) - status_led="ubnt:green:link6" - ;; - routerstation|\ - routerstation-pro) - status_led="ubnt:green:rf" - ;; - rw2458n) - status_led="$board:green:d3" - ;; - smart-300) - status_led="nc-link:green:system" - ;; - qihoo-c301) - status_led="qihoo:green:status" - ;; - t830) - status_led="$board:green:usb" - ;; - tellstick-znet-lite) - status_led="tellstick:white:system" - ;; - tew-673gru) - status_led="trendnet:blue:wps" - ;; - tew-712br|\ - tew-732br|\ - tew-823dru) - status_led="trendnet:green:power" - ;; - tl-mr3020|\ - tl-wr2543n) - status_led="tp-link:green:wps" - ;; - tl-wa750re) - status_led="tp-link:orange:re" - ;; - tl-wa850re|\ - tl-wa850re-v2) - status_led="tp-link:blue:re" - ;; - tl-wa855re-v1|\ - tl-wa860re) - status_led="tp-link:green:power" - ;; - tl-mr6400) - status_led="tp-link:white:power" - ;; - archer-c5|\ - archer-c7|\ - tl-mr3220|\ - tl-mr3220-v2|\ - tl-mr3420|\ - tl-mr3420-v2|\ - tl-wa701nd-v2|\ - tl-wa801nd-v2|\ - tl-wa801nd-v3|\ - tl-wa830re-v2|\ - tl-wa901nd|\ - tl-wa901nd-v2|\ - tl-wa901nd-v3|\ - tl-wa901nd-v4|\ - tl-wa901nd-v5|\ - tl-wdr3320-v2|\ - tl-wdr3500|\ - tl-wr1041n-v2|\ - tl-wr1043n-v5|\ - tl-wr1043nd|\ - tl-wr1043nd-v2|\ - tl-wr1043nd-v4|\ - tl-wr740n-v6|\ - tl-wr741nd|\ - tl-wr741nd-v4|\ - tl-wr840n-v2|\ - tl-wr840n-v3|\ - tl-wr841n-v1|\ - tl-wr841n-v7|\ - tl-wr841n-v8|\ - tl-wr841n-v11|\ - tl-wr842n-v2|\ - tl-wr842n-v3|\ - tl-wr941nd|\ - tl-wr941nd-v5) - status_led="tp-link:green:system" - ;; - tl-wr841n-v9) - status_led="tp-link:green:qss" - ;; - tl-wr940n-v6) - status_led="tp-link:orange:diag" - ;; - tl-wdr6500-v2) - status_led="tp-link:white:system" - ;; - tube2h) - status_led="alfa:green:signal4" - ;; - unifi) - status_led="ubnt:green:dome" - ;; - uap-pro|\ - unifiac-lite|\ - unifiac-pro) - status_led="ubnt:white:dome" - ;; - unifi-outdoor-plus) - status_led="ubnt:white:front" - ;; - airgateway|\ - airgatewaypro) - status_led="ubnt:white:status" - ;; - wi2a-ac200i) - status_led="nokia:green:ctrl" - ;; - whr-g301n|\ - whr-hp-g300n|\ - whr-hp-gn|\ - wzr-hp-g300nh) - status_led="buffalo:green:router" - ;; - wlae-ag300n) - status_led="buffalo:green:status" - ;; - r6100|\ - wndap360|\ - wndr3700|\ - wndr3700v4|\ - wndr4300|\ - wnr2000|\ - wnr2000-v3|\ - wnr2200|\ - wnr612-v2|\ - wnr1000-v2|\ - wpn824n) - status_led="netgear:green:power" - ;; - wp543) - status_led="$board:green:diag" - ;; - wpj342|\ - wpj531|\ - wpj558) - status_led="$board:green:sig3" - ;; - wpj563) - status_led="$board:green:sig1" - ;; - wrt160nl|\ - wrt400n) - status_led="$board:blue:wps" - ;; - zcn-1523h-2|\ - zcn-1523h-5) - status_led="zcn-1523h:amber:init" - ;; - wlr8100) - status_led="sitecom:amber:status" - ;; - esac -} - -set_state() { - get_status_led - - case "$1" in - preinit) - status_led_blink_preinit - ;; - failsafe) - status_led_blink_failsafe - ;; - preinit_regular) - status_led_blink_preinit_regular - ;; - upgrade) - status_led_blink_preinit_regular - ;; - done) - status_led_on - case $(board_name) in - gl-ar300m|\ - gl-ar750) - fw_printenv lc >/dev/null 2>&1 && fw_setenv "bootcount" 0 - ;; - qihoo-c301) - local n=$(fw_printenv activeregion | cut -d = -f 2) - fw_setenv "image${n}trynum" 0 - ;; - wi2a-ac200i) - fw_setenv PKRstCnt 0 - ;; - esac - ;; - esac -} diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom deleted file mode 100644 index 8fe57c87cc..0000000000 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ /dev/null @@ -1,178 +0,0 @@ -#!/bin/sh - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh - -ath9k_eeprom_die() { - echo "ath9k eeprom: " "$*" - exit 1 -} - -ath9k_eeprom_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath9k_eeprom_die "no mtd device found for partition $part" - - dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath9k_eeprom_die "failed to extract from $mtd" -} - -ath9k_ubi_eeprom_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local ubidev=$(nand_find_ubi $CI_UBIPART) - local ubi - - ubi=$(nand_find_volume $ubidev $part) - [ -n "$ubi" ] || \ - ath9k_eeprom_die "no UBI volume found for $part" - - dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath9k_eeprom_die "failed to extract from $ubi" -} - -ath9k_eeprom_extract_reverse() { - local part=$1 - local offset=$2 - local count=$(($3)) - local mtd - local reversed - local caldata - - mtd=$(find_mtd_chardev "$part") - reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd) - - for byte in $reversed; do - caldata="\x${byte}${caldata}" - done - - printf "%b" "$caldata" > /lib/firmware/$FIRMWARE -} - -ath9k_patch_firmware_mac() { - local mac=$1 - - [ -z "$mac" ] && return - - macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=2 count=1 -} - -board=$(board_name) - -case "$FIRMWARE" in -"soc_wmac.eeprom") - case $board in - c-55|\ - c-60) - ath9k_eeprom_extract "art" 0x1000 0x800 - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) - ;; - fritz4020|\ - fritz450e) - ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 - ;; - mr18) - . /lib/upgrade/nand.sh - - if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800 - else - ath9k_eeprom_extract "odm-caldata" 0x1000 0x800 - fi - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +1) - ;; - r6100 | \ - wndr3700v4 | \ - wndr4300) - ath9k_eeprom_extract "caldata" 0x1000 0x800 - ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0x0) - ;; - rambutan) - ath9k_eeprom_extract "art" 0x1000 0x800 - ;; - wlr8100) - ath9k_eeprom_extract "art" 0x1000 0x800 - ath9k_patch_firmware_mac $(mtd_get_mac_ascii u-boot-env "ethaddr") - ;; - z1) - . /lib/upgrade/nand.sh - - if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800 - else - ath9k_eeprom_extract "origcaldata" 0x1000 0x800 - fi - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2) - ;; - *) - ath9k_eeprom_die "board $board is not supported yet" - ;; - esac - ;; - -"pci_wmac0.eeprom") - case $board in - c-55) - ath9k_eeprom_extract "art" 0x5000 0x800 - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) - ;; - fritz300e) - ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440 - ;; - mr18) - . /lib/upgrade/nand.sh - - if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 0x5000 0x800 - else - ath9k_eeprom_extract "odm-caldata" 0x5000 0x800 - fi - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2) - ;; - wndr3700v4 | \ - wndr4300) - ath9k_eeprom_extract "caldata" 0x5000 0x800 - ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0xc) - ;; - z1) - . /lib/upgrade/nand.sh - - if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 0x15000 0x1000 - else - ath9k_eeprom_extract "origcaldata" 0x15000 0x1000 - fi - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3) - ;; - *) - ath9k_eeprom_die "board $board is not supported yet" - ;; - esac - ;; - -"pci_wmac1.eeprom") - case $board in - mr18) - . /lib/upgrade/nand.sh - - if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 0x9000 0x800 - else - ath9k_eeprom_extract "odm-caldata" 0x9000 0x800 - fi - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3) - ;; - *) - ath9k_eeprom_die "board $board is not supported yet" - ;; - esac - ;; -esac diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata deleted file mode 100644 index c0e8f17d94..0000000000 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ /dev/null @@ -1,195 +0,0 @@ -#!/bin/sh - -ath10kcal_die() { - echo "ath10cal: " "$*" - exit 1 -} - -ath10kcal_from_file() { - local source=$1 - local offset=$(($2)) - local count=$(($3)) - - dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $source" -} - -ath10kcal_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd cal_size - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath10kcal_die "no mtd device found for partition $part" - - # Check that the calibration data size in header equals the desired size - cal_size=$(dd if=$mtd bs=2 count=1 skip=$(( $offset / 2 )) conv=swab 2>/dev/null | hexdump -ve '1/2 "%d"') - - [ "$count" = "$cal_size" ] || \ - ath10kcal_die "no calibration data found in $part" - - dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $mtd" -} - -ath10kcal_patch_mac() { - local mac=$1 - - [ -z "$mac" ] && return - - macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=6 count=1 -} - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh - -board=$(board_name) - -case "$FIRMWARE" in -"ath10k/cal-pci-0000:00:00.0.bin") - case $board in - a40|\ - a60|\ - mr1750|\ - mr1750v2|\ - om5p-acv2) - ath10kcal_extract "ART" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) - ;; - archer-c25-v1|\ - tl-wdr6500-v2) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) - ;; - archer-c7-v4|\ - archer-c7-v5) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1) - ;; - cf-e355ac-v1|\ - cf-e380ac-v1|\ - cf-e380ac-v2|\ - dlan-pro-1200-ac|\ - e1700ac-v2|\ - e600gac-v2|\ - minibox-v3.2|\ - oolite-v5.2|\ - oolite-v5.2-dev|\ - sr3200|\ - xd3200) - ath10kcal_extract "art" 0x5000 0x844 - ;; - dap-2695-a1) - ath10kcal_extract "radiocfg" 0x5000 0x844 - ath10kcal_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a) - ;; - dir-869-a1|\ - qihoo-c301) - ath10kcal_extract "radiocfg" 0x5000 0x844 - ath10kcal_patch_mac $(mtd_get_mac_ascii devdata wlan5mac) - ;; - dw33d) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(mtd_get_mac_binary art 0x12) - ;; - epg5000|\ - esr1750) - ath10kcal_extract "caldata" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) - ;; - gl-ar750s|\ - gl-ar750|\ - tl-wpa8630) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) - ;; - koala) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0xc) +0) - ;; - mc-mac1200r) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) - ;; - r6100) - ath10kcal_extract "caldata" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) +2) - ;; - rb-952ui-5ac2nd|\ - rb-wapg-5hact2hnd) - ath10kcal_from_file "/sys/firmware/mikrotik/hard_config/wlan_data" 0x5000 0x844 - ;; - re355|\ - re450|\ - tl-wr902ac-v1) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) - ;; - unifiac-lite|\ - unifiac-pro) - ath10kcal_extract "EEPROM" 0x5000 0x844 - ;; - wi2a-ac200i) - ath10kcal_extract "ART" 0x5000 0x844 - ;; - esac - ;; -"ath10k/cal-pci-0000:01:00.0.bin") - case $board in - archer-c5|\ - archer-c7) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) - ;; - nbg6616|\ - nbg6716) - ath10kcal_extract "RFdata" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) - ;; - om5p-ac) - ath10kcal_extract "ART" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) - ;; - rb-911g-5hpacd|\ - rb-921gs-5hpacd-r2|\ - rb-922uags-5hpacd|\ - rb-962uigs-5hact2hnt) - ath10kcal_from_file "/sys/firmware/mikrotik/hard_config/wlan_data" 0x5000 0x844 - ;; - wlr8100) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) - ;; - esac - ;; -"ath10k/pre-cal-pci-0000:00:00.0.bin") - case $board in - archer-c58-v1|\ - archer-c59-v1|\ - archer-c59-v2|\ - archer-c60-v1|\ - cf-e355ac-v2|\ - cf-e375ac) - ath10kcal_extract "art" 0x5000 0x2f20 - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - ;; - archer-c60-v2) - ath10kcal_extract "art" 0x5000 0x2f20 - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) - ;; - cf-e385ac) - ath10kcal_extract "art" 0x5000 0x2f20 - ;; - esac - ;; -*) - exit 1 - ;; -esac diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac deleted file mode 100644 index 2a06b7d07b..0000000000 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ /dev/null @@ -1,24 +0,0 @@ -#!/bin/ash - -[ "$ACTION" == "add" ] || exit 0 - -PHYNBR=${DEVPATH##*/phy} - -[ -n $PHYNBR ] || exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh - -board=$(board_name) - -case "$board" in - archer-c58-v1|\ - archer-c59-v1|\ - archer-c59-v2|\ - archer-c60-v1) - echo $(macaddr_add $(mtd_get_mac_binary mac 0x8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress - ;; - *) - ;; -esac - diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix deleted file mode 100644 index bd1abb9681..0000000000 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix +++ /dev/null @@ -1,52 +0,0 @@ -#!/bin/sh - -# For AR9220 and AR9223, GPIO JTAG must explicit be disabled -# before LEDs start working. Do this when wifi device is -# detected. - -# -# $DEVPATH is not valid for some boards (including WZR-HP-AG300H). -# Manipulate the $DEVPATH to reach the corresponding phyN. -# - -devdir=$(dirname $DEVPATH) -devdir=$(dirname $devdir) -phydir=/sys$devdir/ieee80211 - -[ -d $phydir ] || exit 0 - -phyname=$(cat $phydir/phy*/name) - -[ -z $phyname -o $ACTION != "add" ] && exit 0 - -# -# ar922x_disable_gpio_jtag(): -# -# Emulate -# REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE); -# for AR9220 and AR9223. -# - -ar922x_disable_gpio_jtag() { - local regidx=0x4054 - - [ -f /sys/kernel/debug/ieee80211/$1/ath9k/regidx ] || return - - echo $regidx > /sys/kernel/debug/ieee80211/$1/ath9k/regidx - regval=$(cat /sys/kernel/debug/ieee80211/$1/ath9k/regval) - regval=$((regval | 0x20000)) - echo regval $regval - echo $regval > /sys/kernel/debug/ieee80211/$1/ath9k/regval -} - -[ $phyname -a $ACTION = "add" ] && { - . /lib/functions.sh - - case $(board_name) in - wzr-hp-ag300h) - ar922x_disable_gpio_jtag $phyname - ;; - esac; -} - -exit 0 diff --git a/target/linux/ar71xx/base-files/etc/inittab b/target/linux/ar71xx/base-files/etc/inittab deleted file mode 100644 index 9820e7144b..0000000000 --- a/target/linux/ar71xx/base-files/etc/inittab +++ /dev/null @@ -1,3 +0,0 @@ -::sysinit:/etc/init.d/rcS S boot -::shutdown:/etc/init.d/rcS K shutdown -::askconsole:/usr/libexec/login.sh diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration deleted file mode 100644 index 0388fb6dc9..0000000000 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration +++ /dev/null @@ -1,108 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2013 OpenWrt.org -# - -SWITCH_NAME_CHANGED= - -. /lib/functions.sh - -do_change_switch_name() { - local config="$1" - local option=$2 - local oldname=$3 - local newname=$4 - local val - - config_get val "$config" $option - [ "$val" != "$oldname" ] && return 0 - - uci_set network "$config" $option $newname - SWITCH_NAME_CHANGED=1 - - return 0 -} - -migrate_switch_name() { - local oldname=$1 - local newname=$2 - - config_load network - - logger -t migrate-switchX "Updating switch names in network configuration" - - config_foreach do_change_switch_name switch name $oldname $newname - config_foreach do_change_switch_name switch_vlan device $oldname $newname - - [ "$SWITCH_NAME_CHANGED" = "1" ] && { - logger -t migrate-switchX "Switch names updated, saving network configuration" - uci commit network - } -} - -board=$(board_name) - -case "$board" in -airrouter|\ -ap121|\ -ap121-mini|\ -ap96|\ -dir-600-a1|\ -dir-615-c1|\ -dir-615-e1|\ -dir-615-e4|\ -dir-825-c1|\ -ebr-2310-c1|\ -ew-dorin|\ -ew-dorin-router|\ -ja76pf|\ -rb-750|\ -rb-751|\ -tew-632brp|\ -tew-712br|\ -tl-mr3220|\ -tl-mr3220-v2 |\ -tl-mr3420|\ -tl-wdr4300|\ -tl-wr741nd|\ -tl-wr741nd-v4|\ -tl-wr841n-v7|\ -tl-wr1041n-v2|\ -whr-g301n|\ -whr-hp-g300n|\ -whr-hp-gn|\ -wrt160nl|\ -wzr-hp-ag300h|\ -wzr-hp-g300nh2|\ -wzr-hp-g450h|\ -z1) - migrate_switch_name "eth0" "switch0" - ;; - -el-m150|\ -rb-450) - migrate_switch_name "eth1" "switch0" - ;; - -db120|\ -rb-2011il|\ -rb-2011ils|\ -rb-2011l|\ -rb-2011uas-2hnd) - migrate_switch_name "eth0" "switch0" - migrate_switch_name "eth1" "switch1" - ;; - -dir-825-b1|\ -nbg460n_550n_550nh|\ -tew-673gru) - migrate_switch_name "rtl8366s" "switch0" - ;; - -tl-wr1043nd) - migrate_switch_name "rtl8366rb" "switch0" - ;; - -esac - -exit 0 diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-vlan-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-vlan-migration deleted file mode 100644 index 259d240610..0000000000 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-vlan-migration +++ /dev/null @@ -1,13 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2010 OpenWrt.org -# - -dev="$(uci -q get network.@switch_vlan[0].device)" -vlan="$(uci -q get network.@switch_vlan[0].vlan)" - -if [ "$dev" = "rtl8366s" ] && [ "$vlan" = 0 ]; then - logger -t vlan-migration "VLAN 0 is invalid for RTL8366s, changing to 1" - uci set network.@switch_vlan[0].vlan=1 - uci commit network -fi diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration b/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration deleted file mode 100644 index c244b3b460..0000000000 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration +++ /dev/null @@ -1,84 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2013 OpenWrt.org -# - -LED_OPTIONS_CHANGED=0 - -. /lib/functions.sh - -do_led_update_sysfs() -{ - local cfg=$1; shift - local tuples="$@" - local sysfs - local name - - config_get sysfs $cfg sysfs - config_get name $cfg name - - [ -z "$sysfs" ] && return - - for tuple in $tuples; do - local old=${tuple%=*} - local new=${tuple#*=} - local new_sysfs - - new_sysfs=$(echo ${sysfs} | sed "s/${old}/${new}/") - - [ "$new_sysfs" = "$sysfs" ] && continue - - uci set system.${cfg}.sysfs="${new_sysfs}" - LED_OPTIONS_CHANGED=1 - - logger -t led-migration "sysfs option of LED \"${name}\" updated to ${new_sysfs}" - done; -} - -migrate_leds() -{ - config_load system - config_foreach do_led_update_sysfs led "$@" -} - -board=$(board_name) - -case "$board" in -archer-c7) - migrate_leds ":blue:=:green:" - ;; -dhp-1565-a1|\ -dir-825-c1|\ -dir-835-a1) - migrate_leds ":orange:=:amber:" ":wifi_bgn=:wlan2g" - ;; -dr344) - migrate_leds ":red:=:green:" ":yellow:=:green:" - ;; -gl-ar150) - migrate_leds "gl-ar150:wlan=gl-ar150:orange:wlan" "gl-ar150:lan=gl-ar150:green:lan" "gl-ar150:wan=gl-ar150:green:wan" - ;; -oolite-v1) - migrate_leds "oolite:=${board}" - ;; -wndap360|\ -wndr3700|\ -wnr2000|\ -wnr2200) - migrate_leds "${board}:=netgear:" - ;; -wndr3700v4|\ -wndr4300) - migrate_leds ":orange:=:amber:" - ;; -wnr1000-v2) - migrate_leds "wnr1000v2:=netgear:" - ;; -wnr612-v2) - migrate_leds "wnr612v2:=netgear:" - ;; -esac - -[ "$LED_OPTIONS_CHANGED" = "1" ] && uci commit system - -exit 0 diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum deleted file mode 100644 index 2d1afb11cb..0000000000 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2010 OpenWrt.org -# - -. /lib/functions.sh - -board=$(board_name) - -fixtrx() { - mtd -o 32 fixtrx firmware -} - -fixwrgg() { - local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd) - - [ "$kernel_size" ] && mtd -c 0x$kernel_size fixwrgg firmware -} - -case "$board" in -mynet-rext |\ -wrt160nl) - fixtrx - ;; -dap-2695-a1) - fixwrgg - ;; -esac diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header b/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header deleted file mode 100644 index b3857ef07f..0000000000 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -. /lib/functions.sh - -fix_seama_header() { - local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd) - - [ "$kernel_size" ] && mtd -c 0x$kernel_size fixseama firmware -} - -board=$(board_name) - -case "$board" in -dir-869-a1) - fix_seama_header - ;; -esac diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh deleted file mode 100755 index 044ef4eae5..0000000000 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ /dev/null @@ -1,1589 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2009-2011 OpenWrt.org -# - -AR71XX_BOARD_NAME= -AR71XX_MODEL= - -ar71xx_get_mtd_offset_size_format() { - local mtd="$1" - local offset="$2" - local size="$3" - local format="$4" - local dev - - dev=$(find_mtd_part $mtd) - [ -z "$dev" ] && return - - dd if=$dev iflag=skip_bytes bs=$size skip=$offset count=1 2>/dev/null | hexdump -v -e "1/1 \"$format\"" -} - -ar71xx_get_mtd_part_magic() { - local mtd="$1" - ar71xx_get_mtd_offset_size_format "$mtd" 0 4 %02x -} - -wndr3700_board_detect() { - local machine="$1" - local magic - local name - - name="wndr3700" - - magic="$(ar71xx_get_mtd_part_magic firmware)" - case $magic in - "33373030") - machine="NETGEAR WNDR3700" - ;; - "33373031") - model="$(ar71xx_get_mtd_offset_size_format art 41 32 %c)" - # Use awk to remove everything unprintable - model_stripped="$(ar71xx_get_mtd_offset_size_format art 41 32 %c | LC_CTYPE=C awk -v 'FS=[^[:print:]]' '{print $1; exit}')" - case $model in - $'\xff'*) - if [ "${model:24:1}" = 'N' ]; then - machine="NETGEAR WNDRMAC" - else - machine="NETGEAR WNDR3700v2" - fi - ;; - '29763654+16+64'*) - machine="NETGEAR ${model_stripped:14}" - ;; - '29763654+16+128'*) - machine="NETGEAR ${model_stripped:15}" - ;; - *) - # Unknown ID - machine="NETGEAR ${model_stripped}" - esac - esac - - AR71XX_BOARD_NAME="$name" - AR71XX_MODEL="$machine" -} - -ubnt_get_mtd_part_magic() { - ar71xx_get_mtd_offset_size_format EEPROM 4118 2 %02x -} - -ubnt_xm_board_detect() { - local model - local magic - - magic="$(ubnt_get_mtd_part_magic)" - case ${magic:0:3} in - "e00"|\ - "e01"|\ - "e80") - model="Ubiquiti NanoStation M" - ;; - "e0a") - model="Ubiquiti NanoStation loco M" - ;; - "e1b"|\ - "e1d") - model="Ubiquiti Rocket M" - ;; - "e20"|\ - "e2d") - model="Ubiquiti Bullet M" - ;; - "e30") - model="Ubiquiti PicoStation M" - ;; - esac - - [ -z "$model" ] || AR71XX_MODEL="${model}${magic:3:1}" -} - -ubnt_unifi_ac_get_mtd_part_magic() { - ar71xx_get_mtd_offset_size_format EEPROM 12 2 %02x -} - -ubnt_unifi_ac_board_detect() { - local model - local magic - - magic="$(ubnt_unifi_ac_get_mtd_part_magic)" - case ${magic:0:4} in - "e517") - model="Ubiquiti UniFi-AC-LITE" - ;; - "e527") - model="Ubiquiti UniFi-AC-LR" - ;; - "e537") - model="Ubiquiti UniFi-AC-PRO" - ;; - "e557") - model="Ubiquiti UniFi-AC-MESH" - ;; - "e567") - model="Ubiquiti UniFi-AC-MESH-PRO" - ;; - esac - - [ -z "$model" ] || AR71XX_MODEL="${model}" -} - -cybertan_get_hw_magic() { - local part - - part=$(find_mtd_part firmware) - [ -z "$part" ] && return 1 - - dd bs=8 count=1 skip=0 if=$part 2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"' -} - -dir505_board_detect() { - local dev=$(find_mtd_part 'mac') - [ -z "$dev" ] && return - - # The revision is stored at the beginning of the "mac" partition - local rev="$(LC_CTYPE=C awk -v 'FS=[^[:print:]]' '{print $1; exit}' $dev)" - AR71XX_MODEL="D-Link DIR-505 rev. $rev" -} - -tplink_get_hwid() { - local part - - part=$(find_mtd_part firmware) - [ -z "$part" ] && return 1 - - dd if=$part bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_get_mid() { - local part - - part=$(find_mtd_part firmware) - [ -z "$part" ] && return 1 - - dd if=$part bs=4 count=1 skip=17 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_board_detect() { - local model="$1" - local hwid - local hwver - - hwid=$(tplink_get_hwid) - mid=$(tplink_get_mid) - hwver=${hwid:6:2} - hwver=" v${hwver#0}" - - case "$hwid" in - "001001"*) - model="TP-Link TL-MR10U" - ;; - "001101"*) - model="TP-Link TL-MR11U" - ;; - "001201"*) - model="TP-Link TL-MR12U" - ;; - "001301"*) - model="TP-Link TL-MR13U" - ;; - "007260"*) - model="TellStick ZNet Lite" - ;; - "015000"*) - model="EasyLink EL-M150" - ;; - "015300"*) - model="EasyLink EL-MINI" - ;; - "044401"*) - model="ANTMINER-S1" - ;; - "044403"*) - model="ANTMINER-S3" - ;; - "066601"*) - model="OMYlink OMY-G1" - ;; - "066602"*) - model="OMYlink OMY-X1" - ;; - "070100"*) - model="TP-Link TL-WA701N/ND" - ;; - "070301"*) - model="TP-Link TL-WR703N" - ;; - "071000"*) - model="TP-Link TL-WR710N" - - [ "$hwid" = '07100002' -a "$mid" = '00000002' ] && hwver=' v2.1' - ;; - "072001"*) - model="TP-Link TL-WR720N" - ;; - "073000"*) - model="TP-Link TL-WA730RE" - ;; - "074000"*) - model="TP-Link TL-WR740N/ND" - ;; - "074100"*) - model="TP-Link TL-WR741N/ND" - ;; - "074300"*) - model="TP-Link TL-WR743N/ND" - ;; - "075000"*) - model="TP-Link TL-WA750RE" - ;; - "080100"*) - model="TP-Link TL-WA801N/ND" - ;; - "080200"*) - model="TP-Link TL-WR802N" - - [ "$hwid" = '08020002' -a "$mid" = '00000002' ] && hwver=' v2' - ;; - "081000"*) - model="TP-Link TL-WR810N" - ;; - "083000"*) - model="TP-Link TL-WA830RE" - - [ "$hwver" = ' v10' ] && hwver=' v1' - ;; - "084100"*) - model="TP-Link TL-WR841N/ND" - - [ "$hwid" = '08410002' -a "$mid" = '00000002' ] && hwver=' v1.5' - ;; - "084200"*) - model="TP-Link TL-WR842N/ND" - ;; - "084300"*) - model="TP-Link TL-WR843N/ND" - ;; - "085000"*) - model="TP-Link TL-WA850RE" - ;; - "085500"*) - model="TP-Link TL-WA855RE" - ;; - "086000"*) - model="TP-Link TL-WA860RE" - ;; - "090100"*) - model="TP-Link TL-WA901N/ND" - ;; - "094000"*) - model="TP-Link TL-WR940N" - ;; - "094100"*) - model="TP-Link TL-WR941N/ND" - - [ "$hwid" = "09410002" -a "$mid" = "00420001" ] && { - model="Rosewill RNX-N360RT" - hwver="" - } - ;; - "104100"*) - model="TP-Link TL-WR1041N/ND" - ;; - "104300"*) - model="TP-Link TL-WR1043N/ND" - ;; - "120000"*) - model="MERCURY MAC1200R" - ;; - "254300"*) - model="TP-Link TL-WR2543N/ND" - ;; - "302000"*) - model="TP-Link TL-MR3020" - ;; - "304000"*) - model="TP-Link TL-MR3040" - ;; - "322000"*) - model="TP-Link TL-MR3220" - ;; - "332000"*) - model="TP-Link TL-WDR3320" - ;; - "342000"*) - model="TP-Link TL-MR3420" - ;; - "350000"*) - model="TP-Link TL-WDR3500" - ;; - "360000"*) - model="TP-Link TL-WDR3600" - ;; - "430000"*) - model="TP-Link TL-WDR4300" - ;; - "430080"*) - iw reg set IL - model="TP-Link TL-WDR4300 (IL)" - ;; - "431000"*) - model="TP-Link TL-WDR4310" - ;; - "44440101"*) - model="ANTROUTER-R1" - ;; - "453000"*) - model="Mercury MW4530R" - ;; - "49000002") - model="TP-Link TL-WDR4900" - ;; - "640000"*) - model="TP-Link TL-MR6400" - ;; - "65000002") - model="TP-Link TL-WDR6500" - ;; - "721000"*) - model="TP-Link TL-WA7210N" - ;; - "750000"*|\ - "c70000"*) - model="TP-Link Archer C7" - ;; - "751000"*) - model="TP-Link TL-WA7510N" - ;; - "934100"*) - model="NC-LINK SMART-300" - ;; - "c50000"*) - model="TP-Link Archer C5" - ;; - *) - hwver="" - ;; - esac - - AR71XX_MODEL="$model$hwver" -} - -tplink_pharos_get_model_string() { - local part - part=$(find_mtd_part 'product-info') - [ -z "$part" ] && return 1 - - # The returned string will end with \r\n, but we don't remove it here - # to simplify matching against it in the sysupgrade image check - dd if=$part bs=1 skip=4360 2>/dev/null | head -n 1 -} - -tplink_pharos_board_detect() { - local model_string="$1" - local oIFS="$IFS"; IFS=":"; set -- $model_string; IFS="$oIFS" - - local model="${1%%\(*}" - - AR71XX_MODEL="TP-Link $model v$2" -} - -tplink_pharos_v2_get_model_string() { - local part - part=$(find_mtd_part 'product-info') - [ -z "$part" ] && return 1 - - dd if=$part iflag=skip_bytes bs=64 skip=4360 count=1 2>/dev/null | tr -d '\r\0' | head -n 1 -} - -mikrotik_board_detect() { - local machine="$1" - - case "$machine" in - *"2011iL") - name="rb-2011il" - ;; - *"2011iLS") - name="rb-2011ils" - ;; - *"2011L") - name="rb-2011l" - ;; - *"2011UAS") - name="rb-2011uas" - ;; - *"2011UAS-2HnD") - name="rb-2011uas-2hnd" - ;; - *"2011UiAS") - name="rb-2011uias" - ;; - *"2011UiAS-2HnD") - name="rb-2011uias-2hnd" - ;; - *"2011UiAS-2HnD r2") - name="rb-2011uias-2hnd-r2" - ;; - *"411/A/AH") - name="rb-411" - ;; - *"411U") - name="rb-411u" - ;; - *"433/AH") - name="rb-433" - ;; - *"433UAH") - name="rb-433u" - ;; - *"435G") - name="rb-435g" - ;; - *"450") - name="rb-450" - ;; - *"450G") - name="rb-450g" - ;; - *"493/AH") - name="rb-493" - ;; - *"493G") - name="rb-493g" - ;; - *"750") - name="rb-750" - ;; - *"750 r2"|\ - *"750r2") - name="rb-750-r2" - ;; - *"750GL") - name="rb-750gl" - ;; - *"750P r2") - name="rb-750p-pbr2" - ;; - *"750UP r2"|\ - *"750UPr2") - name="rb-750up-r2" - ;; - *"751") - name="rb-751" - ;; - *"751G") - name="rb-751g" - ;; - *"911-2Hn") - name="rb-911-2hn" - ;; - *"911-5Hn") - name="rb-911-5hn" - ;; - *"911G-2HPnD") - name="rb-911g-2hpnd" - ;; - *"911G-5HPacD") - name="rb-911g-5hpacd" - ;; - *"911G-5HPnD") - name="rb-911g-5hpnd" - ;; - *"912UAG-2HPnD") - name="rb-912uag-2hpnd" - ;; - *"912UAG-5HPnD") - name="rb-912uag-5hpnd" - ;; - *"921GS-5HPacD r2") - name="rb-921gs-5hpacd-r2" - ;; - *"922UAGS-5HPacD") - name="rb-922uags-5hpacd" - ;; - *"931-2nD") - name="rb-931-2nd" - ;; - *"941-2nD") - name="rb-941-2nd" - ;; - *"951G-2HnD") - name="rb-951g-2hnd" - ;; - *"951Ui-2HnD") - name="rb-951ui-2hnd" - ;; - *"951Ui-2nD") - name="rb-951ui-2nd" - ;; - *"952Ui-5ac2nD") - name="rb-952ui-5ac2nd" - ;; - *"962UiGS-5HacT2HnT") - name="rb-962uigs-5hact2hnt" - ;; - *"LHG 5nD") - name="rb-lhg-5nd" - ;; - *"mAP 2nD"|\ - *"mAP2nD") - name="rb-map-2nd" - ;; - *"mAP L-2nD"|\ - *"mAPL-2nD") - name="rb-mapl-2nd" - ;; - *"SXT 2nD r3") - name="rb-sxt-2nd-r3" - ;; - *"SXT Lite2") - name="rb-sxt2n" - ;; - *"SXT Lite5") - name="rb-sxt5n" - ;; - *"wAP 2nD r2") - name="rb-wap-2nd" - ;; - *"wAP R-2nD"|\ - *"wAPR-2nD") - name="rb-wapr-2nd" - ;; - *"wAP G-5HacT2HnD"|\ - *"wAPG-5HacT2HnD") - name="rb-wapg-5hact2hnd" - ;; - esac - - echo "$name" -} - -ar71xx_board_detect() { - local machine - local name - - machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo) - - case "$machine" in - *"A40") - name="a40" - ;; - *"A60") - name="a60" - ;; - *"AC1750DB") - name="f9k1115v2" - ;; - *"AirGateway") - name="airgateway" - ;; - *"AirGateway Pro") - name="airgatewaypro" - ;; - *"AirRouter") - name="airrouter" - ;; - *"ALFA Network AP120C") - name="alfa-ap120c" - ;; - *"ALFA Network AP96") - name="alfa-ap96" - ;; - *"ALFA Network N2/N5") - name="alfa-nx" - ;; - *"ALL0258N") - name="all0258n" - ;; - *"ALL0305") - name="all0305" - ;; - *"ALL0315N") - name="all0315n" - ;; - *"Antminer-S1") - name="antminer-s1" - ;; - *"Antminer-S3") - name="antminer-s3" - ;; - *"AP121 reference board") - name="ap121" - ;; - *"AP121-MINI") - name="ap121-mini" - ;; - *"AP121F") - name="ap121f" - ;; - *"AP132 reference board") - name="ap132" - ;; - *"AP135-020 reference board") - name="ap135-020" - ;; - *"AP136-010 reference board") - name="ap136-010" - ;; - *"AP136-020 reference board") - name="ap136-020" - ;; - *"AP143 reference board") - name="ap143" - ;; - *"AP147-010 reference board") - name="ap147-010" - ;; - *"AP152 reference board") - name="ap152" - ;; - *"AP531B0") - name="ap531b0" - ;; - *"AP90Q") - name="ap90q" - ;; - *"AP91-5G") - name="ap91-5g" - ;; - *"Archer C25 v1") - name="archer-c25-v1" - ;; - *"Archer C5") - name="archer-c5" - ;; - *"Archer C7 v4") - name="archer-c7-v4" - ;; - *"Archer C7 v5") - name="archer-c7-v5" - ;; - *"Archer C58 v1") - name="archer-c58-v1" - ;; - *"Archer C59 v1") - name="archer-c59-v1" - ;; - *"Archer C59 v2") - name="archer-c59-v2" - ;; - *"Archer C60 v1") - name="archer-c60-v1" - ;; - *"Archer C60 v2") - name="archer-c60-v2" - ;; - *"Archer C7") - name="archer-c7" - ;; - *"Arduino Yun") - name="arduino-yun" - ;; - *"Atheros AP96") - name="ap96" - ;; - *"AW-NR580") - name="aw-nr580" - ;; - *"BHR-4GRV2") - name="bhr-4grv2" - ;; - *"Black Swift board"*) - name="bsb" - ;; - *"Bullet M") - name="bullet-m" - ubnt_xm_board_detect - ;; - *"Bullet M XW") - name="bullet-m-xw" - ;; - *"BXU2000n-2 rev. A1") - name="bxu2000n-2-a1" - ;; - *"C-55") - name="c-55" - ;; - *"C-60") - name="c-60" - ;; - *"CAP324") - name="cap324" - ;; - *"CAP4200AG") - name="cap4200ag" - ;; - *"Carambola2"*) - name="carambola2" - ;; - *"CF-E316N v2") - name="cf-e316n-v2" - ;; - *"CF-E320N v2") - name="cf-e320n-v2" - ;; - *"CF-E355AC v1") - name="cf-e355ac-v1" - ;; - *"CF-E355AC v2") - name="cf-e355ac-v2" - ;; - *"CF-E375AC") - name="cf-e375ac" - ;; - *"CF-E380AC v1") - name="cf-e380ac-v1" - ;; - *"CF-E380AC v2") - name="cf-e380ac-v2" - ;; - *"CF-E385AC") - name="cf-e385ac" - ;; - *"CF-E520N") - name="cf-e520n" - ;; - *"CF-E530N") - name="cf-e530n" - ;; - *"CPE210/220") - name="cpe210" - tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" - ;; - *"CPE210 v2") - name="cpe210-v2" - tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)" - ;; - *"CPE210 v3") - name="cpe210-v3" - tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)" - ;; - *"CPE505N") - name="cpe505n" - ;; - *"CPE510/520") - name="cpe510" - tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" - ;; - *"CPE510 v2") - name="cpe510-v2" - tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)" - ;; - *"CPE830") - name="cpe830" - ;; - *"CPE870") - name="cpe870" - ;; - *"CR3000") - name="cr3000" - ;; - *"CR5000") - name="cr5000" - ;; - *"DAP-1330 Rev. A1") - name="dap-1330-a1" - ;; - *"DAP-2695 rev. A1") - name="dap-2695-a1" - ;; - *"DB120 reference board") - name="db120" - ;; - *"DGL-5500 rev. A1") - name="dgl-5500-a1" - ;; - *"DHP-1565 rev. A1") - name="dhp-1565-a1" - ;; - *"DIR-505 rev. A1") - name="dir-505-a1" - dir505_board_detect - ;; - *"DIR-600 rev. A1") - name="dir-600-a1" - ;; - *"DIR-615 rev. C1") - name="dir-615-c1" - ;; - *"DIR-615 rev. E1") - name="dir-615-e1" - ;; - *"DIR-615 rev. E4") - name="dir-615-e4" - ;; - *"DIR-615 rev. I1") - name="dir-615-i1" - ;; - *"DIR-825 rev. B1") - name="dir-825-b1" - ;; - *"DIR-825 rev. C1") - name="dir-825-c1" - ;; - *"DIR-835 rev. A1") - name="dir-835-a1" - ;; - *"DIR-869 rev. A1") - name="dir-869-a1" - ;; - *"dLAN Hotspot") - name="dlan-hotspot" - ;; - *"dLAN pro 1200+ WiFi ac") - name="dlan-pro-1200-ac" - ;; - *"dLAN pro 500 Wireless+") - name="dlan-pro-500-wp" - ;; - *"Domino Pi") - name="gl-domino" - ;; - *"DR342") - name="dr342" - ;; - *"DR344") - name="dr344" - ;; - *"DR531") - name="dr531" - ;; - *"Dragino v2") - name="dragino2" - ;; - *"DW33D") - name="dw33d" - ;; - *"E1700AC v2") - name="e1700ac-v2" - ;; - *"E2100L") - name="e2100l" - ;; - *"E558 v2") - name="e558-v2" - ;; - *"E600G v2") - name="e600g-v2" - ;; - *"E600GAC v2") - name="e600gac-v2" - ;; - *"E750A v4") - name="e750a-v4" - ;; - *"E750G v8") - name="e750g-v8" - ;; - *"EAP120") - name="eap120" - tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" - ;; - *"EAP300 v2") - name="eap300v2" - ;; - *"EAP7660D") - name="eap7660d" - ;; - *"EBR-2310 rev. C1") - name="ebr-2310-c1" - ;; - *"EL-M150") - name="el-m150" - ;; - *"EL-MINI") - name="el-mini" - ;; - *"EmbWir-Balin") - name="ew-balin" - ;; - *"EmbWir-Dorin") - name="ew-dorin" - ;; - *"EmbWir-Dorin-Router") - name="ew-dorin-router" - ;; - *"ENS202EXT") - name="ens202ext" - ;; - *"EPG5000") - name="epg5000" - ;; - *"ESR1750") - name="esr1750" - ;; - *"ESR900") - name="esr900" - ;; - *"eTactica EG-200") - name="rme-eg200" - ;; - *"FRITZ!Box 4020") - name="fritz4020" - ;; - *"FRITZ!WLAN Repeater 300E") - name="fritz300e" - ;; - *"FRITZ!WLAN Repeater 450E") - name="fritz450e" - ;; - *"GL-AR150") - name="gl-ar150" - ;; - *"GL-AR300") - name="gl-ar300" - ;; - *"GL-AR300M") - name="gl-ar300m" - ;; - *"GL-AR750") - name="gl-ar750" - ;; - *"GL-AR750S") - name="gl-ar750s" - ;; - *"GL-CONNECT INET v1") - name="gl-inet" - - local size="$(mtd_get_part_size 'firmware')" - - [ "$size" = "8192000" ] && AR71XX_MODEL="GL-iNet 6408A v1" - [ "$size" = "16580608" ] && AR71XX_MODEL="GL-iNet 6416A v1" - ;; - *"GL-MIFI") - name="gl-mifi" - ;; - *"GL-USB150") - name="gl-usb150" - ;; - *"HiveAP-121") - name="hiveap-121" - ;; - *"HiWiFi HC6361") - name="hiwifi-hc6361" - ;; - *"Hornet-UB") - local size="$(mtd_get_part_size 'firmware')" - - [ "$size" = "7929856" ] && name="hornet-ub" - [ "$size" = "16318464" ] && name="hornet-ub-x2" - ;; - *"JA76PF") - name="ja76pf" - ;; - *"JA76PF2") - name="ja76pf2" - ;; - *"JWAP003") - name="jwap003" - ;; - *"JWAP230") - name="jwap230" - ;; - *"Koala") - name="koala" - ;; - *"LAN Turtle") - name="lan-turtle" - ;; - *"Lima"*) - name="lima" - ;; - *"Litebeam M5"*) - name="lbe-m5" - ;; - *"Loco M XW") - name="loco-m-xw" - ;; - *"LS-SR71") - name="ls-sr71" - ;; - *"MAC1200R") - name="mc-mac1200r" - ;; - "MikroTik"*|\ - "Mikrotik"*) - name=$(mikrotik_board_detect "$machine") - ;; - *"MiniBox V1.0") - name="minibox-v1" - ;; - *"Minibox V3.2") - name="minibox-v3.2" - ;; - *"MR12") - name="mr12" - ;; - *"MR16") - name="mr16" - ;; - *"MR1750") - name="mr1750" - ;; - *"MR1750v2") - name="mr1750v2" - ;; - *"MR18") - name="mr18" - ;; - *"MR600") - name="mr600" - ;; - *"MR600v2") - name="mr600v2" - ;; - *"MR900") - name="mr900" - ;; - *"MR900v2") - name="mr900v2" - ;; - *"My Net N600") - name="mynet-n600" - ;; - *"My Net N750") - name="mynet-n750" - ;; - *"My Net Wi-Fi Range Extender") - name="mynet-rext" - ;; - *"MZK-W04NU") - name="mzk-w04nu" - ;; - *"MZK-W300NH") - name="mzk-w300nh" - ;; - *"N5Q") - name="n5q" - ;; - *"Nanostation M") - name="nanostation-m" - ubnt_xm_board_detect - ;; - *"Nanostation M XW") - name="nanostation-m-xw" - ;; - *"NBG460N/550N/550NH") - name="nbg460n_550n_550nh" - ;; - *"NBG6616") - name="nbg6616" - ;; - *"NBG6716") - name="nbg6716" - ;; - *"OM2P") - name="om2p" - ;; - *"OM2P HS") - name="om2p-hs" - ;; - *"OM2P HSv2") - name="om2p-hsv2" - ;; - *"OM2P HSv3") - name="om2p-hsv3" - ;; - *"OM2P HSv4") - name="om2p-hsv4" - ;; - *"OM2P LC") - name="om2p-lc" - ;; - *"OM2Pv2") - name="om2pv2" - ;; - *"OM2Pv4") - name="om2pv4" - ;; - *"OM5P") - name="om5p" - ;; - *"OM5P AC") - name="om5p-ac" - ;; - *"OM5P ACv2") - name="om5p-acv2" - ;; - *"OM5P AN") - name="om5p-an" - ;; - *"OMY-G1") - name="omy-g1" - ;; - *"OMY-X1") - name="omy-x1" - ;; - *"Onion Omega") - name="onion-omega" - ;; - *"Oolite V1.0") - name="oolite-v1" - ;; - *"Packet Squirrel") - name="packet-squirrel" - ;; - *"Oolite V5.2") - name="oolite-v5.2" - ;; - *"Oolite V5.2-Dev") - name="oolite-v5.2-dev" - ;; - *"PB42") - name="pb42" - ;; - *"PB44 reference board") - name="pb44" - ;; - *"PQI Air Pen") - name="pqi-air-pen" - ;; - *"Qihoo 360 C301") - name="qihoo-c301" - ;; - *"R36A") - name="r36a" - ;; - *"R602N") - name="r602n" - ;; - *"R6100") - name="r6100" - ;; - *"Rambutan"*) - name="rambutan" - ;; - *"RE355") - name="re355" - ;; - *"RE450") - name="re450" - ;; - *"Rocket M") - name="rocket-m" - ubnt_xm_board_detect - ;; - *"Rocket M TI") - name="rocket-m-ti" - ;; - *"Rocket M XW") - name="rocket-m-xw" - ;; - *"RouterStation") - name="routerstation" - ;; - *"RouterStation Pro") - name="routerstation-pro" - ;; - *"RUT900") - name="rut900" - ;; - *"RW2458N") - name="rw2458n" - ;; - *"SC1750") - name="sc1750" - ;; - *"SC300M") - name="sc300m" - ;; - *"SC450") - name="sc450" - ;; - *"SMART-300") - name="smart-300" - ;; - *"SOM9331") - name="som9331" - ;; - *"SR3200") - name="sr3200" - ;; - *"T830") - name="t830" - ;; - *"TellStick ZNet Lite") - name="tellstick-znet-lite" - ;; - *"TEW-632BRP") - name="tew-632brp" - ;; - *"TEW-673GRU") - name="tew-673gru" - ;; - *"TEW-712BR") - name="tew-712br" - ;; - *"TEW-732BR") - name="tew-732br" - ;; - *"TEW-823DRU") - name="tew-823dru" - ;; - *"TL-MR10U") - name="tl-mr10u" - ;; - *"TL-MR11U") - name="tl-mr11u" - ;; - *"TL-MR12U") - name="tl-mr12u" - ;; - *"TL-MR13U v1") - name="tl-mr13u" - ;; - *"TL-MR3020") - name="tl-mr3020" - ;; - *"TL-MR3040") - name="tl-mr3040" - ;; - *"TL-MR3040 v2") - name="tl-mr3040-v2" - ;; - *"TL-MR3220") - name="tl-mr3220" - ;; - *"TL-MR3220 v2") - name="tl-mr3220-v2" - ;; - *"TL-MR3420") - name="tl-mr3420" - ;; - *"TL-MR3420 v2") - name="tl-mr3420-v2" - ;; - *"TL-MR6400") - name="tl-mr6400" - ;; - *"TL-WA701ND v2") - name="tl-wa701nd-v2" - ;; - *"TL-WA7210N v2") - name="tl-wa7210n-v2" - ;; - *"TL-WA750RE") - name="tl-wa750re" - ;; - *"TL-WA7510N v1") - name="tl-wa7510n" - ;; - *"TL-WA801ND v2") - name="tl-wa801nd-v2" - ;; - *"TL-WA801ND v3") - name="tl-wa801nd-v3" - ;; - *"TL-WA830RE v2") - name="tl-wa830re-v2" - ;; - *"TL-WA850RE") - name="tl-wa850re" - ;; - *"TL-WA850RE v2") - name="tl-wa850re-v2" - ;; - *"TL-WA855RE v1") - name="tl-wa855re-v1" - ;; - *"TL-WA860RE") - name="tl-wa860re" - ;; - *"TL-WA901ND") - name="tl-wa901nd" - ;; - *"TL-WA901ND v2") - name="tl-wa901nd-v2" - ;; - *"TL-WA901ND v3") - name="tl-wa901nd-v3" - ;; - *"TL-WA901ND v4") - name="tl-wa901nd-v4" - ;; - *"TL-WA901ND v5") - name="tl-wa901nd-v5" - ;; - *"TL-WDR3320 v2") - name="tl-wdr3320-v2" - ;; - *"TL-WDR3500") - name="tl-wdr3500" - ;; - *"TL-WDR3600/4300/4310") - name="tl-wdr4300" - ;; - *"TL-WDR4900 v2") - name="tl-wdr4900-v2" - ;; - *"TL-WDR6500 v2") - name="tl-wdr6500-v2" - ;; - *"TL-WPA8630") - name="tl-wpa8630" - ;; - *"TL-WR1041N v2") - name="tl-wr1041n-v2" - ;; - *"TL-WR1043N v5") - name="tl-wr1043n-v5" - ;; - *"TL-WR1043ND") - name="tl-wr1043nd" - ;; - *"TL-WR1043ND v2") - name="tl-wr1043nd-v2" - ;; - *"TL-WR1043ND v4") - name="tl-wr1043nd-v4" - ;; - *"TL-WR2543N"*) - name="tl-wr2543n" - ;; - *"TL-WR703N v1") - name="tl-wr703n" - ;; - *"TL-WR710N v1") - name="tl-wr710n" - ;; - *"TL-WR720N"*) - name="tl-wr720n-v3" - ;; - *"TL-WR740N/ND v6") - name="tl-wr740n-v6" - ;; - *"TL-WR741ND") - name="tl-wr741nd" - ;; - *"TL-WR741ND v4") - name="tl-wr741nd-v4" - ;; - *"TL-WR802N v1") - name="tl-wr802n-v1" - ;; - *"TL-WR802N v2") - name="tl-wr802n-v2" - ;; - *"TL-WR810N") - name="tl-wr810n" - ;; - *"TL-WR810N v2") - name="tl-wr810n-v2" - ;; - *"TL-WR840N v2") - name="tl-wr840n-v2" - ;; - *"TL-WR840N v3") - name="tl-wr840n-v3" - ;; - *"TL-WR841N v1") - name="tl-wr841n-v1" - ;; - *"TL-WR841N/ND v11") - name="tl-wr841n-v11" - ;; - *"TL-WR841N/ND v7") - name="tl-wr841n-v7" - ;; - *"TL-WR841N/ND v8") - name="tl-wr841n-v8" - ;; - *"TL-WR841N/ND v9") - name="tl-wr841n-v9" - ;; - *"TL-WR842N/ND v2") - name="tl-wr842n-v2" - ;; - *"TL-WR842N/ND v3") - name="tl-wr842n-v3" - ;; - *"TL-WR902AC v1") - name="tl-wr902ac-v1" - ;; - *"TL-WR940N v4") - name="tl-wr940n-v4" - ;; - *"TL-WR940N v6") - name="tl-wr940n-v6" - ;; - *"TL-WR941N/ND v5") - name="tl-wr941nd-v5" - ;; - *"TL-WR941N/ND v6") - name="tl-wr941nd-v6" - ;; - *"TL-WR941ND") - name="tl-wr941nd" - ;; - *"TL-WR942N v1") - name="tl-wr942n-v1" - ;; - *"TS-D084") - name="ts-d084" - ;; - *"Tube2H") - name="tube2h" - ;; - *"UniFi") - name="unifi" - ;; - *"UniFi AP Pro") - name="uap-pro" - ;; - *"UniFi-AC-LITE/MESH") - name="unifiac-lite" - ubnt_unifi_ac_board_detect - ;; - *"UniFi-AC-PRO/MESH-PRO") - name="unifiac-pro" - ubnt_unifi_ac_board_detect - ;; - *"UniFiAP Outdoor") - name="unifi-outdoor" - ;; - *"UniFiAP Outdoor+") - name="unifi-outdoor-plus" - ;; - *"WAM250") - name="wam250" - ;; - *"WBS210") - name="wbs210" - tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" - ;; - *"WBS510") - name="wbs510" - tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" - ;; - "WeIO"*) - name="weio" - ;; - *"WI2A-AC200i") - name="wi2a-ac200i" - ;; - *"WHR-G301N") - name="whr-g301n" - ;; - *"WHR-HP-G300N") - name="whr-hp-g300n" - ;; - *"WHR-HP-GN") - name="whr-hp-gn" - ;; - *"WiFi Pineapple NANO") - name="wifi-pineapple-nano" - ;; - *"WLAE-AG300N") - name="wlae-ag300n" - ;; - *"WLR-8100") - name="wlr8100" - ;; - *"WNDAP360") - name="wndap360" - ;; - *"WNDR3700/WNDR3800/WNDRMAC") - wndr3700_board_detect "$machine" - ;; - *"WNDR3700v4") - name="wndr3700v4" - ;; - *"WNDR4300") - name="wndr4300" - ;; - *"WNR1000 V2") - name="wnr1000-v2" - ;; - *"WNR2000") - name="wnr2000" - ;; - *"WNR2000 V3") - name="wnr2000-v3" - ;; - *"WNR2000 V4") - name="wnr2000-v4" - ;; - *"WNR2200") - name="wnr2200" - ;; - *"WNR612 V2") - name="wnr612-v2" - ;; - *"WP543") - name="wp543" - ;; - *"WPE72") - name="wpe72" - ;; - *"WPJ342") - name="wpj342" - ;; - *"WPJ344") - name="wpj344" - ;; - *"WPJ531") - name="wpj531" - ;; - *"WPJ558") - name="wpj558" - ;; - *"WPJ563") - name="wpj563" - ;; - *"WPN824N") - name="wpn824n" - ;; - *"WRT160NL") - name="wrt160nl" - ;; - *"WRT400N") - name="wrt400n" - ;; - *"WRTnode2Q"*) - name="wrtnode2q" - ;; - *"WZR-450HP2") - name="wzr-450hp2" - ;; - *"WZR-HP-AG300H/WZR-600DHP") - name="wzr-hp-ag300h" - ;; - *"WZR-HP-G300NH") - name="wzr-hp-g300nh" - ;; - *"WZR-HP-G300NH2") - name="wzr-hp-g300nh2" - ;; - *"WZR-HP-G450H") - name="wzr-hp-g450h" - ;; - *"XD3200") - name="xd3200" - ;; - *"Z1") - name="z1" - ;; - *"ZBT-WE1526") - name="zbt-we1526" - ;; - *"ZCN-1523H-2") - name="zcn-1523h-2" - ;; - *"ZCN-1523H-5") - name="zcn-1523h-5" - ;; - esac - - [ -z "$AR71XX_MODEL" ] && [ "${machine:0:8}" = 'TP-LINK ' ] && \ - tplink_board_detect "$machine" - - [ -z "$name" ] && name="unknown" - - [ -z "$AR71XX_BOARD_NAME" ] && AR71XX_BOARD_NAME="$name" - [ -z "$AR71XX_MODEL" ] && AR71XX_MODEL="$machine" - - [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/" - - echo "$AR71XX_BOARD_NAME" > /tmp/sysinfo/board_name - echo "$AR71XX_MODEL" > /tmp/sysinfo/model -} diff --git a/target/linux/ar71xx/base-files/lib/preinit/01_preinit_do_ar71xx.sh b/target/linux/ar71xx/base-files/lib/preinit/01_preinit_do_ar71xx.sh deleted file mode 100644 index ff5407a0d4..0000000000 --- a/target/linux/ar71xx/base-files/lib/preinit/01_preinit_do_ar71xx.sh +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/sh - -do_ar71xx() { - . /lib/ar71xx.sh - - ar71xx_board_detect -} - -boot_hook_add preinit_main do_ar71xx diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx deleted file mode 100644 index b0aa150817..0000000000 --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx +++ /dev/null @@ -1,60 +0,0 @@ -# -# Copyright (C) 2009 OpenWrt.org -# - -fetch_mac_from_mtd() { - local mtd_part=$1 - local lan_env=$2 - local wan_env=$3 - local mtd mac - - mtd=$(grep $mtd_part /proc/mtd | cut -d: -f1) - [ -z $mtd ] && return - - mac=$(grep $lan_env /dev/$mtd | cut -d= -f2) - [ ! -z $mac ] && ifconfig eth0 hw ether $mac 2>/dev/null - - mac=$(grep $wan_env /dev/$mtd | cut -d= -f2) - [ ! -z $mac ] && ifconfig eth1 hw ether $mac 2>/dev/null -} - -preinit_set_mac_address() { - . /lib/functions.sh - - case $(board_name) in - c-55|\ - c-60) - mac_lan=$(mtd_get_mac_binary art 0x0) - [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan" - ;; - dir-615-c1|\ - tew-632brp) - fetch_mac_from_mtd config lan_mac wan_mac - ;; - dir-615-i1) - fetch_mac_from_mtd nvram sys_lan_mac sys_wan_mac - ;; - mr18|\ - z1) - mac_lan=$(mtd_get_mac_binary_ubi board-config 0x66) - [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan" - ;; - r6100) - mac_lan=$(mtd_get_mac_binary caldata 0x0) - [ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan" - mac_wan=$(mtd_get_mac_binary caldata 0x6) - [ -n "$mac_wan" ] && ifconfig eth0 hw ether "$mac_wan" - ;; - rambutan) - mac_lan=$(mtd_get_mac_binary art 0x0) - [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan" - mac_wan=$(mtd_get_mac_binary art 0x6) - [ -n "$mac_wan" ] && ifconfig eth1 hw ether "$mac_wan" - ;; - wrt160nl) - fetch_mac_from_mtd nvram lan_hwaddr wan_hwaddr - ;; - esac -} - -boot_hook_add preinit_main preinit_set_mac_address diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx deleted file mode 100644 index 68875fa1ec..0000000000 --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/sh - -# -# Copyright (C) 2009 OpenWrt.org -# - -set_preinit_iface() { - . /lib/functions.sh - - case $(board_name) in - alfa-ap96|\ - alfa-nx|\ - ap135-020|\ - ap136-020|\ - ap147-010|\ - archer-c5|\ - archer-c7|\ - bhr-4grv2|\ - dir-505-a1|\ - gl-ar750|\ - gl-inet|\ - jwap003|\ - pb42|\ - pb44|\ - rb-433|\ - rb-433u|\ - rb-435g|\ - rb-450|\ - rb-450g|\ - routerstation|\ - routerstation-pro|\ - smart-300|\ - tl-mr3420-v2|\ - tl-wdr4900-v2|\ - tl-wr1043nd-v2|\ - tl-wr710n|\ - tl-wr720n-v3|\ - tl-wr841n-v8|\ - tl-wr842n-v2|\ - tl-wr940n-v4|\ - tl-wr940n-v6|\ - tl-wr941nd-v6|\ - wnr1000-v2|\ - wnr2000-v3|\ - wnr2200|\ - wnr612-v2|\ - wpe72|\ - wpn824n) - ifname=eth1 - ;; - *) - ifname=eth0 - ;; - esac -} - -boot_hook_add preinit_main set_preinit_iface diff --git a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k deleted file mode 100644 index cc3dc42c9c..0000000000 --- a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k +++ /dev/null @@ -1,50 +0,0 @@ -#!/bin/sh - -. /lib/functions.sh -. /lib/functions/system.sh - -do_patch_ath10k_firmware() { - local firmware_file="/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin" - - # bail out if firmware does not exist - [ -f "$firmware_file" ] || return - - local mac_offset=276 - local mac_length=6 - local default_mac="00:03:07:12:34:56" - local current_mac="$(hexdump -v -n $mac_length -s $mac_offset -e '5/1 "%02x:" 1/1 "%02x"' $firmware_file 2>/dev/null)" - - # check if mac address was already patched - [ "$default_mac" = "$current_mac" ] || return - - # some boards have bogus mac in otp (= directly in the PCIe card's EEPROM). - # we have to patch the default mac in the firmware because we cannot change - # the otp. - case $(board_name) in - dgl-5500-a1|\ - tew-823dru) - local mac - mac=$(mtd_get_mac_ascii nvram wlan1_mac) - - cp $firmware_file /tmp/ath10k-firmware.bin - macaddr_2bin $mac | dd of=/tmp/ath10k-firmware.bin \ - conv=notrunc bs=1 seek=$mac_offset count=$mac_length - ;; - esac - - [ -f /tmp/ath10k-firmware.bin ] || return - - cp /tmp/ath10k-firmware.bin $firmware_file - rm /tmp/ath10k-firmware.bin -} - -check_patch_ath10k_firmware() { - case $(board_name) in - dgl-5500-a1|\ - tew-823dru) - do_patch_ath10k_firmware - ;; - esac -} - -boot_hook_add preinit_main check_patch_ath10k_firmware diff --git a/target/linux/ar71xx/base-files/lib/upgrade/allnet.sh b/target/linux/ar71xx/base-files/lib/upgrade/allnet.sh deleted file mode 100644 index 5295d8cfe0..0000000000 --- a/target/linux/ar71xx/base-files/lib/upgrade/allnet.sh +++ /dev/null @@ -1,155 +0,0 @@ -# The U-Boot loader of the some Allnet devices requires image sizes and -# checksums to be provided in the U-Boot environment. -# In case the check fails during boot, a failsafe-system is started to provide -# a minimal web-interface for flashing a new firmware. - -# determine size of the main firmware partition -platform_get_firmware_size() { - local dev size erasesize name - while read dev size erasesize name; do - name=${name#'"'}; name=${name%'"'} - case "$name" in - firmware) - printf "%d" "0x$size" - break - ;; - esac - done < /proc/mtd -} - -# get the first 4 bytes (magic) of a given file starting at offset in hex format -get_magic_long_at() { - dd if="$1" skip=$(( $CI_BLKSZ / 4 * $2 )) bs=4 count=1 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -get_filesize() { - wc -c "$1" | while read image_size _n ; do echo $image_size ; break; done -} - -# scan through the update image pages until matching a magic -platform_get_offset() { - offsetcount=0 - magiclong="x" - if [ -n "$3" ]; then - offsetcount=$3 - fi - while magiclong=$( get_magic_long_at "$1" "$offsetcount" ) && [ -n "$magiclong" ]; do - case "$magiclong" in - "2705"*) - # U-Boot image magic - if [ "$2" = "uImage" ]; then - echo $offsetcount - return - fi - ;; - "68737173"|"73717368") - # SquashFS - if [ "$2" = "rootfs" ]; then - echo $offsetcount - return - fi - ;; - "deadc0de"|"19852003") - # JFFS2 empty page - if [ "$2" = "rootfs-data" ]; then - echo $offsetcount - return - fi - ;; - esac - offsetcount=$(( $offsetcount + 1 )) - done -} - -platform_check_image_allnet() { - local fw_printenv=/usr/sbin/fw_printenv - [ ! -n "$fw_printenv" -o ! -x "$fw_printenv" ] && { - echo "Please install uboot-envtools!" - return 1 - } - - [ ! -r "/etc/fw_env.config" ] && { - echo "/etc/fw_env.config is missing" - return 1 - } - - local image_size=$( get_filesize "$1" ) - local firmware_size=$( platform_get_firmware_size ) - [ $image_size -ge $firmware_size ] && - { - echo "upgrade image is too big (${image_size}b > ${firmware_size}b)" - } - - local vmlinux_blockoffset=$( platform_get_offset "$1" uImage ) - [ -z $vmlinux_blockoffset ] && { - echo "vmlinux-uImage not found" - return 1 - } - - local rootfs_blockoffset=$( platform_get_offset "$1" rootfs "$vmlinux_blockoffset" ) - [ -z $rootfs_blockoffset ] && { - echo "missing rootfs" - return 1 - } - - local data_blockoffset=$( platform_get_offset "$1" rootfs-data "$rootfs_blockoffset" ) - [ -z $data_blockoffset ] && { - echo "rootfs doesn't have JFFS2 end marker" - return 1 - } - - return 0 -} - -platform_do_upgrade_allnet() { - local firmware_base_addr=$( printf "%d" "$1" ) - local vmlinux_blockoffset=$( platform_get_offset "$2" uImage ) - if [ ! -n "$vmlinux_blockoffset" ]; then - echo "can't determine uImage offset" - return 1 - fi - local rootfs_blockoffset=$( platform_get_offset "$2" rootfs $(( $vmlinux_blockoffset + 1 )) ) - local vmlinux_offset=$(( $vmlinux_blockoffset * $CI_BLKSZ )) - local vmlinux_addr=$(( $firmware_base_addr + $vmlinux_offset )) - local vmlinux_hexaddr=0x$( printf "%08x" "$vmlinux_addr" ) - if [ ! -n "$rootfs_blockoffset" ]; then - echo "can't determine rootfs offset" - return 1 - fi - local rootfs_offset=$(( $rootfs_blockoffset * $CI_BLKSZ )) - local rootfs_addr=$(( $firmware_base_addr + $rootfs_offset )) - local rootfs_hexaddr=0x$( printf "%08x" "$rootfs_addr" ) - local vmlinux_blockcount=$(( $rootfs_blockoffset - $vmlinux_blockoffset )) - local vmlinux_size=$(( $rootfs_offset - $vmlinux_offset )) - local vmlinux_hexsize=0x$( printf "%08x" "$vmlinux_size" ) - local data_blockoffset=$( platform_get_offset "$2" rootfs-data $(( $rootfs_blockoffset + 1 )) ) - if [ ! -n "$data_blockoffset" ]; then - echo "can't determine rootfs size" - return 1 - fi - local data_offset=$(( $data_blockoffset * $CI_BLKSZ )) - local rootfs_blockcount=$(( $data_blockoffset - $rootfs_blockoffset )) - local rootfs_size=$(( $data_offset - $rootfs_offset )) - local rootfs_hexsize=0x$( printf "%08x" "$rootfs_size" ) - - local rootfs_md5=$( dd if="$2" bs=$CI_BLKSZ skip=$rootfs_blockoffset count=$rootfs_blockcount 2>/dev/null | md5sum -); rootfs_md5="${rootfs_md5%% *}" - local vmlinux_md5=$( dd if="$2" bs=$CI_BLKSZ skip=$vmlinux_blockoffset count=$vmlinux_blockcount 2>/dev/null | md5sum -); vmlinux_md5="${vmlinux_md5%% *}" - # this needs a recent version of uboot-envtools! - cat >/tmp/fw_env_upgrade <<EOF -vmlinux_start_addr $vmlinux_hexaddr -vmlinux_size $vmlinux_hexsize -vmlinux_checksum $vmlinux_md5 -rootfs_start_addr $rootfs_hexaddr -rootfs_size $rootfs_hexsize -rootfs_checksum $rootfs_md5 -bootcmd bootm $vmlinux_hexaddr -EOF - - mkdir -p /var/lock - fw_setenv -s /tmp/fw_env_upgrade || { - echo "failed to update U-Boot environment" - return 1 - } - shift - default_do_upgrade "$@" -} diff --git a/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh b/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh deleted file mode 100644 index e991a06b7a..0000000000 --- a/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh +++ /dev/null @@ -1,165 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2012 OpenWrt.org -# - -. /lib/functions.sh -. /lib/ar71xx.sh - -get_magic_at() { - local mtddev=$1 - local pos=$2 - dd bs=1 count=2 skip=$pos if=$mtddev 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -dir825b_is_caldata_valid() { - local mtddev=$1 - local magic - - magic=$(get_magic_at $mtddev 4096) - [ "$magic" != "a55a" ] && return 0 - - magic=$(get_magic_at $mtddev 20480) - [ "$magic" != "a55a" ] && return 0 - - return 1 -} - -dir825b_copy_caldata() { - local cal_src=$1 - local cal_dst=$2 - local mtd_src - local mtd_dst - local md5_src - local md5_dst - - mtd_src=$(find_mtd_part $cal_src) - [ -z "$mtd_src" ] && { - echo "no $cal_src partition found" - return 1 - } - - mtd_dst=$(find_mtd_part $cal_dst) - [ -z "$mtd_dst" ] && { - echo "no $cal_dst partition found" - return 1 - } - - dir825b_is_caldata_valid "$mtd_src" && { - echo "no valid calibration data found in $cal_src" - return 1 - } - - dir825b_is_caldata_valid "$mtd_dst" && { - echo "Copying calibration data from $cal_src to $cal_dst..." - dd if="$mtd_src" 2>/dev/null | mtd -q -q write - "$cal_dst" - } - - md5_src=$(md5sum "$mtd_src") && md5_src="${md5_src%% *}" - md5_dst=$(md5sum "$mtd_dst") && md5_dst="${md5_dst%% *}" - - [ "$md5_src" != "$md5_dst" ] && { - echo "calibration data mismatch $cal_src:$md5_src $cal_dst:$md5_dst" - return 1 - } - - return 0 -} - -dir825b_do_upgrade_combined() { - local fw_part=$1 - local fw_file=$2 - local fw_mtd=$(find_mtd_part $fw_part) - local fw_length=0x$(dd if="$fw_file" bs=2 skip=1 count=4 2>/dev/null) - local fw_blocks=$(($fw_length / 65536)) - - if [ -n "$fw_mtd" ] && [ ${fw_blocks:-0} -gt 0 ]; then - local append="" - [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP" - - sync - dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \ - mtd $append write - "$fw_part" - fi -} - -dir825b_check_image() { - local magic="$(get_magic_long "$1")" - local fw_mtd=$(find_mtd_part "firmware_orig") - - case "$magic" in - "27051956") - ;; - "43493030") - local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null) - local md5_chk=$(dd if="$1" bs=64k skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}" - local fw_len=$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null) - local fw_part_len=$(mtd_get_part_size "firmware") - - if [ -z "$fw_mtd" ]; then - ask_bool 0 "Do you have a backup of the caldata partition?" || { - echo "Warning, please make sure that you have a backup of the caldata partition." - echo "Once you have that, use 'sysupgrade -i' for upgrading to the 'fat' firmware." - return 1 - } - fi - - if [ -z "$md5_img" -o -z "$md5_chk" ]; then - echo "Unable to get image checksums. Maybe you are using a streamed image?" - return 1 - fi - - if [ "$md5_img" != "$md5_chk" ]; then - echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)" - return 1 - fi - - fw_len=$((0x$fw_len)) - fw_part_len=${fw_part_len:-0} - - if [ $fw_part_len -lt $fw_len ]; then - echo "The upgrade image is too big (size:$fw_len available:$fw_part_len)" - return 1 - fi - ;; - *) - echo "Unsupported image format." - return 1 - ;; - esac - - return 0 -} - -platform_do_upgrade_dir825b() { - local magic="$(get_magic_long "$1")" - local fw_mtd=$(find_mtd_part "firmware_orig") - - case "$magic" in - "27051956") - if [ -n "$fw_mtd" ]; then - # restore calibration data before downgrading to - # the normal image - dir825b_copy_caldata "caldata" "caldata_orig" || { - echo "unable to restore calibration data" - exit 1 - } - PART_NAME="firmware_orig" - else - PART_NAME="firmware" - fi - default_do_upgrade "$1" - ;; - "43493030") - if [ -z "$fw_mtd" ]; then - # backup calibration data before upgrading to the - # fat image - dir825b_copy_caldata "caldata" "caldata_copy" || { - echo "unable to backup calibration data" - exit 1 - } - fi - dir825b_do_upgrade_combined "firmware" "$1" - ;; - esac -} diff --git a/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh b/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh deleted file mode 100644 index dfc57b23f5..0000000000 --- a/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh +++ /dev/null @@ -1,165 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2015-2016 Chris Blake <chrisrblake93@gmail.com> -# -# Custom upgrade script for Meraki NAND devices (ex. MR18) -# Based on dir825.sh and stock nand functions -# -. /lib/ar71xx.sh -. /lib/functions.sh - -get_magic_at() { - local mtddev=$1 - local pos=$2 - dd bs=1 count=2 skip=$pos if=$mtddev 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -meraki_is_caldata_valid() { - local board=$1 - local mtddev=$2 - local magic - - case "$board" in - "mr18") - magic=$(get_magic_at $mtddev 4096) - [ "$magic" != "0202" ] && return 0 - - magic=$(get_magic_at $mtddev 20480) - [ "$magic" != "0202" ] && return 0 - - magic=$(get_magic_at $mtddev 36864) - [ "$magic" != "0202" ] && return 0 - - return 1 - ;; - "z1") - magic=$(get_magic_at $mtddev 4096) - [ "$magic" != "0202" ] && return 0 - - magic=$(get_magic_at $mtddev 86016) - [ "$magic" != "a55a" ] && return 0 - - return 1 - ;; - *) - return 1 - ;; - esac -} - -merakinand_copy_caldata() { - local cal_src=$1 - local cal_dst=$2 - local ubidev="$(nand_find_ubi $CI_UBIPART)" - local board_name="$(board_name)" - local rootfs_size="$(ubinfo /dev/ubi0 -N rootfs_data | grep "Size" | awk '{ print $6 }')" - - # Setup partitions using board name, in case of future platforms - case "$board_name" in - "mr18"|\ - "z1") - # Src is MTD - mtd_src="$(find_mtd_chardev $cal_src)" - [ -n "$mtd_src" ] || { - echo "no mtd device found for partition $cal_src" - exit 1 - } - - # Dest is UBI - # TODO: possibly add create (hard to do when rootfs_data is expanded & mounted) - # Would need to be done from ramdisk - mtd_dst="$(nand_find_volume $ubidev $cal_dst)" - [ -n "$mtd_dst" ] || { - echo "no ubi device found for partition $cal_dst" - exit 1 - } - - meraki_is_caldata_valid "$board_name" "$mtd_src" && { - echo "no valid calibration data found in $cal_src" - exit 1 - } - - meraki_is_caldata_valid "$board_name" "/dev/$mtd_dst" && { - echo "Copying calibration data from $cal_src to $cal_dst..." - dd if="$mtd_src" of=/tmp/caldata.tmp 2>/dev/null - ubiupdatevol "/dev/$mtd_dst" /tmp/caldata.tmp - rm /tmp/caldata.tmp - sync - } - return 0 - ;; - *) - echo "Unsupported device $board_name"; - return 1 - ;; - esac -} - -merakinand_do_kernel_check() { - local board_name="$1" - local tar_file="$2" - local image_magic_word=`(tar xf $tar_file sysupgrade-$board_name/kernel -O 2>/dev/null | dd bs=1 count=4 skip=0 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')` - - # What is our kernel magic string? - case "$board_name" in - "mr18") - [ "$image_magic_word" == "8e73ed8a" ] && { - echo "pass" && return 0 - } - ;; - "z1") - [ "$image_magic_word" == "4d495053" ] && { - echo "pass" && return 0 - } - ;; - esac - - exit 1 -} - -merakinand_do_platform_check() { - local board_name="$1" - local tar_file="$2" - local control_length=`(tar xf $tar_file sysupgrade-$board_name/CONTROL -O | wc -c) 2> /dev/null` - local file_type="$(identify_tar $2 sysupgrade-$board_name/root)" - local kernel_magic="$(merakinand_do_kernel_check $1 $2)" - - case "$board_name" in - "mr18"|\ - "z1") - [ "$control_length" = 0 -o "$file_type" != "squashfs" -o "$kernel_magic" != "pass" ] && { - echo "Invalid sysupgrade file for $board_name" - return 1 - } - ;; - *) - echo "Unsupported device $board_name"; - return 1 - ;; - esac - - return 0 -} - -merakinand_do_upgrade() { - local tar_file="$1" - local board_name="$(board_name)" - - # Do we need to do any platform tweaks? - case "$board_name" in - "mr18") - # Check and create UBI caldata if it's invalid - merakinand_copy_caldata "odm-caldata" "caldata" - nand_do_upgrade $1 - ;; - "z1") - # Check and create UBI caldata if it's invalid - merakinand_copy_caldata "origcaldata" "caldata" - nand_do_upgrade $1 - ;; - *) - echo "Unsupported device $board_name"; - exit 1 - ;; - esac -} diff --git a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh deleted file mode 100644 index f43bdcea7f..0000000000 --- a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh +++ /dev/null @@ -1,232 +0,0 @@ -# The U-Boot loader of the OpenMesh devices requires image sizes and -# checksums to be provided in the U-Boot environment. -# The OpenMesh devices come with 2 main partitions - while one is active -# sysupgrade will flash the other. The boot order is changed to boot the -# newly flashed partition. If the new partition can't be booted due to -# upgrade failures the previously used partition is loaded. - -trim() -{ - echo $1 -} - -cfg_value_get() -{ - local cfg=$1 cfg_opt - local section=$2 our_section=0 - local param=$3 our_param= - - for cfg_opt in $cfg - do - [ "$cfg_opt" = "[$section]" ] && our_section=1 && continue - [ "$our_section" = "1" ] || continue - - our_param=$(echo ${cfg_opt%%=*}) - [ "$param" = "$our_param" ] && echo ${cfg_opt##*=} && break - done -} - -platform_check_image_target_openmesh() -{ - img_board_target="$1" - - case "$img_board_target" in - A60) - [ "$board" = "a40" ] && return 0 - [ "$board" = "a60" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - OM2P) - [ "$board" = "om2p" ] && return 0 - [ "$board" = "om2pv2" ] && return 0 - [ "$board" = "om2pv4" ] && return 0 - [ "$board" = "om2p-lc" ] && return 0 - [ "$board" = "om2p-hs" ] && return 0 - [ "$board" = "om2p-hsv2" ] && return 0 - [ "$board" = "om2p-hsv3" ] && return 0 - [ "$board" = "om2p-hsv4" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - OM5P) - [ "$board" = "om5p" ] && return 0 - [ "$board" = "om5p-an" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - OM5PAC) - [ "$board" = "om5p-ac" ] && return 0 - [ "$board" = "om5p-acv2" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - MR1750) - [ "$board" = "mr1750" ] && return 0 - [ "$board" = "mr1750v2" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - MR600) - [ "$board" = "mr600" ] && return 0 - [ "$board" = "mr600v2" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - MR900) - [ "$board" = "mr900" ] && return 0 - [ "$board" = "mr900v2" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - *) - echo "Invalid board target ($img_board_target). Use the correct image for this platform" - return 1 - ;; - esac -} - -platform_check_image_openmesh() -{ - local img_magic=$1 - local img_path=$2 - local fw_printenv=/usr/sbin/fw_printenv - local img_board_target= img_num_files= i=0 - local cfg_name= kernel_name= rootfs_name= - - case "$img_magic" in - # Combined Extended Image v1 - 43453031) - img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null)) - img_num_files=$(trim $(dd if="$img_path" bs=2 skip=18 count=1 2>/dev/null)) - ;; - *) - echo "Invalid image ($img_magic). Use combined extended images on this platform" - return 1 - ;; - esac - - platform_check_image_target_openmesh "$img_board_target" || return 1 - - [ $img_num_files -lt 3 ] && { - echo "Invalid number of embedded images ($img_num_files). Use the correct image for this platform" - return 1 - } - - cfg_name=$(trim $(dd if="$img_path" bs=2 skip=19 count=16 2>/dev/null)) - - [ "$cfg_name" != "fwupgrade.cfg" ] && { - echo "Invalid embedded config file ($cfg_name). Use the correct image for this platform" - return 1 - } - - kernel_name=$(trim $(dd if="$img_path" bs=2 skip=55 count=16 2>/dev/null)) - - [ "$kernel_name" != "kernel" ] && { - echo "Invalid embedded kernel file ($kernel_name). Use the correct image for this platform" - return 1 - } - - rootfs_name=$(trim $(dd if="$img_path" bs=2 skip=91 count=16 2>/dev/null)) - - [ "$rootfs_name" != "rootfs" ] && { - echo "Invalid embedded kernel file ($rootfs_name). Use the correct image for this platform" - return 1 - } - - [ ! -x "$fw_printenv" ] && { - echo "Please install uboot-envtools!" - return 1 - } - - [ ! -r "/etc/fw_env.config" ] && { - echo "/etc/fw_env.config is missing" - return 1 - } - - return 0 -} - -platform_do_upgrade_openmesh() -{ - local img_path=$1 img_board_target= - local kernel_start_addr= kernel_start_addr1= kernel_start_addr2= - local kernel_size= kernel_md5= - local rootfs_size= rootfs_checksize= rootfs_md5= - local kernel_bsize= total_size= - local data_offset=$((64 * 1024)) block_size= offset= - local uboot_env_upgrade="/tmp/fw_env_upgrade" - local cfg_size= kernel_size= rootfs_size= - local append="" - - [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP" - - cfg_size=$(dd if="$img_path" bs=2 skip=35 count=4 2>/dev/null) - kernel_size=$(dd if="$img_path" bs=2 skip=71 count=4 2>/dev/null) - rootfs_size=$(dd if="$img_path" bs=2 skip=107 count=4 2>/dev/null) - - img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null)) - cfg_content=$(dd if="$img_path" bs=1 skip=$data_offset count=$(echo $((0x$cfg_size))) 2>/dev/null) - - case $img_board_target in - OM2P) - block_size=$((256 * 1024)) - total_size=7340032 - kernel_start_addr1=0x9f1c0000 - kernel_start_addr2=0x9f8c0000 - ;; - OM5P|OM5PAC|MR600|MR900|MR1750|A60) - block_size=$((64 * 1024)) - total_size=7995392 - kernel_start_addr1=0x9f0b0000 - kernel_start_addr2=0x9f850000 - ;; - esac - - kernel_md5=$(cfg_value_get "$cfg_content" "vmlinux" "md5sum") - rootfs_md5=$(cfg_value_get "$cfg_content" "rootfs" "md5sum") - rootfs_checksize=$(cfg_value_get "$cfg_content" "rootfs" "checksize") - - if [ "$((0x$kernel_size % $block_size))" = "0" ] - then - kernel_bsize=$(echo $((0x$kernel_size))) - else - kernel_bsize=$((0x$kernel_size + ($block_size - (0x$kernel_size % $block_size)))) - fi - - mtd -q erase inactive - - offset=$(echo $(($data_offset + 0x$cfg_size + 0x$kernel_size))) - dd if="$img_path" bs=1 skip=$offset count=$(echo $((0x$rootfs_size))) 2>&- | mtd -n -p $kernel_bsize $append write - "inactive" - - offset=$(echo $(($data_offset + 0x$cfg_size))) - dd if="$img_path" bs=1 skip=$offset count=$(echo $((0x$kernel_size))) 2>&- | mtd -n write - "inactive" - - rm $uboot_env_upgrade 2>&- - - if [ "$(grep 'mtd3:.*inactive' /proc/mtd)" ] - then - printf "kernel_size_1 %u\n" $(($kernel_bsize / 1024)) >> $uboot_env_upgrade - printf "rootfs_size_1 %u\n" $((($total_size - $kernel_bsize) / 1024)) >> $uboot_env_upgrade - printf "bootseq 1,2\n" >> $uboot_env_upgrade - kernel_start_addr=$kernel_start_addr1 - else - printf "kernel_size_2 %u\n" $(($kernel_bsize / 1024)) >> $uboot_env_upgrade - printf "rootfs_size_2 %u\n" $((($total_size - $kernel_bsize) / 1024)) >> $uboot_env_upgrade - printf "bootseq 2,1\n" >> $uboot_env_upgrade - kernel_start_addr=$kernel_start_addr2 - fi - - printf "vmlinux_start_addr %s\n" $kernel_start_addr >> $uboot_env_upgrade - printf "vmlinux_size 0x%s\n" $kernel_size >> $uboot_env_upgrade - printf "vmlinux_checksum %s\n" $kernel_md5 >> $uboot_env_upgrade - printf "rootfs_start_addr 0x%x\n" $(($kernel_start_addr + $kernel_bsize)) >> $uboot_env_upgrade - printf "rootfs_size %s\n" $rootfs_checksize >> $uboot_env_upgrade - printf "rootfs_checksum %s\n" $rootfs_md5 >> $uboot_env_upgrade - - mkdir -p /var/lock - fw_setenv -s $uboot_env_upgrade || { - echo "failed to update U-Boot environment" - return 1 - } -} diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh deleted file mode 100755 index 2391a1de8a..0000000000 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ /dev/null @@ -1,915 +0,0 @@ -# -# Copyright (C) 2011 OpenWrt.org -# - -. /lib/functions/system.sh -. /lib/ar71xx.sh - -PART_NAME=firmware -RAMFS_COPY_DATA='/lib/ar71xx.sh /etc/fw_env.config /var/lock/fw_printenv.lock' -RAMFS_COPY_BIN='nandwrite fw_printenv fw_setenv' - -CI_BLKSZ=65536 -CI_LDADR=0x80060000 - -PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0 - -platform_find_partitions() { - local first dev size erasesize name - while read dev size erasesize name; do - name=${name#'"'}; name=${name%'"'} - case "$name" in - vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin|rootfs|filesystem) - if [ -z "$first" ]; then - first="$name" - else - echo "$erasesize:$first:$name" - break - fi - ;; - esac - done < /proc/mtd -} - -platform_find_kernelpart() { - local part - for part in "${1%:*}" "${1#*:}"; do - case "$part" in - vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin) - echo "$part" - break - ;; - esac - done -} - -platform_find_rootfspart() { - local part - for part in "${1%:*}" "${1#*:}"; do - [ "$part" != "$2" ] && echo "$part" && break - done -} - -platform_do_upgrade_combined() { - local partitions=$(platform_find_partitions) - local kernelpart=$(platform_find_kernelpart "${partitions#*:}") - local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}" - local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null) - local kern_blocks=$(($kern_length / $CI_BLKSZ)) - local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ)) - - if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \ - [ ${kern_blocks:-0} -gt 0 ] && \ - [ ${root_blocks:-0} -gt 0 ] && \ - [ ${erase_size:-0} -gt 0 ]; - then - local rootfspart=$(platform_find_rootfspart "$partitions" "$kernelpart") - local append="" - [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP" - - if [ "$PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD" -ne 1 ]; then - ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \ - dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \ - mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions - elif [ -n "$rootfspart" ]; then - dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null | \ - mtd write - $kernelpart - dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null | \ - mtd -r $append write - $rootfspart - fi - fi - PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0 -} - -tplink_get_image_hwid() { - get_image "$@" | dd bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_get_image_mid() { - get_image "$@" | dd bs=4 count=1 skip=17 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_get_image_boot_size() { - get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_pharos_check_support_list() { - local image="$1" - local offset="$2" - local model="$3" - local trargs="$4" - - # Here $image is given to dd directly instead of using get_image; - # otherwise the skip will take almost a second (as dd can't seek) - dd if="$image" bs=1 skip=$offset count=1024 2>/dev/null | tr -d "$trargs" | ( - while IFS= read -r line; do - [ "$line" = "$model" ] && exit 0 - done - - exit 1 - ) -} - -tplink_pharos_check_image() { - local image_magic="$(get_magic_long "$1")" - local board_magic="$2" - [ "$image_magic" != "$board_magic" ] && { - echo "Invalid image magic '$image_magic'. Expected '$board_magic'." - return 1 - } - - local model_string="$3" - local trargs="$4" - - # New images have the support list at 7802888, old ones at 1511432 - tplink_pharos_check_support_list "$1" 7802888 "$model_string" "$trargs" || \ - tplink_pharos_check_support_list "$1" 1511432 "$model_string" "$trargs" || { - echo "Unsupported image (model not in support-list)" - return 1 - } - - return 0 -} - -seama_get_type_magic() { - get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -wrgg_get_image_magic() { - get_image "$@" | dd bs=4 count=1 skip=8 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -cybertan_get_image_magic() { - get_image "$@" | dd bs=8 count=1 skip=0 2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"' -} - -cybertan_check_image() { - local magic="$(cybertan_get_image_magic "$1")" - local fw_magic="$(cybertan_get_hw_magic)" - - [ "$fw_magic" != "$magic" ] && { - echo "Invalid image, ID mismatch, got:$magic, but need:$fw_magic" - return 1 - } - - return 0 -} - -platform_do_upgrade_compex() { - local fw_file=$1 - local fw_part=$PART_NAME - local fw_mtd=$(find_mtd_part $fw_part) - local fw_length=0x$(dd if="$fw_file" bs=2 skip=1 count=4 2>/dev/null) - local fw_blocks=$(($fw_length / 65536)) - - if [ -n "$fw_mtd" ] && [ ${fw_blocks:-0} -gt 0 ]; then - local append="" - [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP" - - sync - dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \ - mtd $append write - "$fw_part" - fi -} - -alfa_check_image() { - local magic_long="$(get_magic_long "$1")" - local fw_part_size=$(mtd_get_part_size firmware) - - case "$magic_long" in - "27051956") - [ "$fw_part_size" != "16318464" ] && { - echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes" - return 1 - } - ;; - "68737173") - [ "$fw_part_size" != "7929856" ] && { - echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes" - return 1 - } - ;; - esac - - return 0 -} - -platform_check_image() { - local board=$(board_name) - local magic="$(get_magic_word "$1")" - local magic_long="$(get_magic_long "$1")" - - [ "$#" -gt 1 ] && return 1 - - case "$board" in - airgateway|\ - airgatewaypro|\ - airrouter|\ - ap121f|\ - ap132|\ - ap531b0|\ - ap90q|\ - archer-c25-v1|\ - archer-c58-v1|\ - archer-c59-v1|\ - archer-c59-v2|\ - archer-c60-v1|\ - archer-c60-v2|\ - archer-c7-v4|\ - archer-c7-v5|\ - arduino-yun|\ - bullet-m|\ - bullet-m-xw|\ - c-55|\ - carambola2|\ - cf-e316n-v2|\ - cf-e320n-v2|\ - cf-e355ac-v1|\ - cf-e355ac-v2|\ - cf-e375ac|\ - cf-e380ac-v1|\ - cf-e380ac-v2|\ - cf-e385ac|\ - cf-e520n|\ - cf-e530n|\ - cpe505n|\ - cpe830|\ - cpe870|\ - dap-1330-a1|\ - dgl-5500-a1|\ - dhp-1565-a1|\ - dir-505-a1|\ - dir-600-a1|\ - dir-615-c1|\ - dir-615-e1|\ - dir-615-e4|\ - dir-615-i1|\ - dir-825-c1|\ - dir-835-a1|\ - dlan-hotspot|\ - dlan-pro-1200-ac|\ - dlan-pro-500-wp|\ - dr342|\ - dr531|\ - dragino2|\ - e1700ac-v2|\ - e558-v2|\ - e600g-v2|\ - e600gac-v2|\ - e750a-v4|\ - e750g-v8|\ - ebr-2310-c1|\ - ens202ext|\ - epg5000|\ - esr1750|\ - esr900|\ - ew-balin|\ - ew-dorin|\ - ew-dorin-router|\ - gl-ar150|\ - gl-ar300m|\ - gl-ar300|\ - gl-ar750|\ - gl-ar750s|\ - gl-domino|\ - gl-mifi|\ - gl-usb150|\ - hiwifi-hc6361|\ - hornet-ub-x2|\ - jwap230|\ - lbe-m5|\ - lima|\ - loco-m-xw|\ - mzk-w04nu|\ - mzk-w300nh|\ - n5q|\ - nanostation-m|\ - nanostation-m-xw|\ - nbg460n_550n_550nh|\ - pqi-air-pen|\ - r36a|\ - r602n|\ - rme-eg200|\ - rocket-m|\ - rocket-m-ti|\ - rocket-m-xw|\ - rw2458n|\ - sc1750|\ - sc300m|\ - sc450|\ - sr3200|\ - t830|\ - tew-632brp|\ - tew-712br|\ - tew-732br|\ - tew-823dru|\ - tl-wr1043n-v5|\ - tl-wr942n-v1|\ - unifi|\ - unifi-outdoor|\ - unifiac-lite|\ - unifiac-pro|\ - wam250|\ - weio|\ - whr-g301n|\ - whr-hp-g300n|\ - whr-hp-gn|\ - wlae-ag300n|\ - wndap360|\ - wpj342|\ - wpj344|\ - wpj531|\ - wpj558|\ - wpj563|\ - wrt400n|\ - wrtnode2q|\ - wzr-450hp2|\ - wzr-hp-ag300h|\ - wzr-hp-g300nh|\ - wzr-hp-g300nh2|\ - wzr-hp-g450h|\ - xd3200) - [ "$magic" != "2705" ] && { - echo "Invalid image type." - return 1 - } - - return 0 - ;; - alfa-ap96|\ - alfa-nx|\ - ap121|\ - ap121-mini|\ - ap135-020|\ - ap136-010|\ - ap136-020|\ - ap147-010|\ - ap152|\ - ap91-5g|\ - ap96|\ - bhr-4grv2|\ - bxu2000n-2-a1|\ - db120|\ - dr344|\ - dw33d|\ - f9k1115v2|\ - hornet-ub|\ - mr12|\ - mr16|\ - zbt-we1526|\ - zcn-1523h-2|\ - zcn-1523h-5) - [ "$magic_long" != "68737173" -a "$magic_long" != "19852003" ] && { - echo "Invalid image type." - return 1 - } - - return 0 - ;; - all0258n|\ - all0315n|\ - cap324|\ - cap4200ag|\ - cr3000|\ - cr5000) - platform_check_image_allnet "$1" && return 0 - return 1 - ;; - all0305|\ - eap300v2|\ - eap7660d|\ - ja76pf|\ - ja76pf2|\ - jwap003|\ - ls-sr71|\ - pb42|\ - pb44|\ - routerstation|\ - routerstation-pro|\ - wp543|\ - wpe72) - [ "$magic" != "4349" ] && { - echo "Invalid image. Use *-sysupgrade.bin files on this board" - return 1 - } - - local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null) - local md5_chk=$(fwtool -q -t -i /dev/null "$1"; dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}" - - if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then - return 0 - else - echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)" - return 1 - fi - - return 0 - ;; - antminer-s1|\ - antminer-s3|\ - antrouter-r1|\ - archer-c5|\ - archer-c7|\ - el-m150|\ - el-mini|\ - gl-inet|\ - lan-turtle|\ - mc-mac1200r|\ - minibox-v1|\ - minibox-v3.2|\ - omy-g1|\ - omy-x1|\ - onion-omega|\ - oolite-v1|\ - oolite-v5.2|\ - oolite-v5.2-dev|\ - packet-squirrel|\ - re355|\ - re450|\ - rut900|\ - smart-300|\ - som9331|\ - tellstick-znet-lite|\ - tl-mr10u|\ - tl-mr11u|\ - tl-mr12u|\ - tl-mr13u|\ - tl-mr3020|\ - tl-mr3040|\ - tl-mr3040-v2|\ - tl-mr3220|\ - tl-mr3220-v2|\ - tl-mr3420|\ - tl-mr3420-v2|\ - tl-mr6400|\ - tl-wa701nd-v2|\ - tl-wa7210n-v2|\ - tl-wa750re|\ - tl-wa7510n|\ - tl-wa801nd-v2|\ - tl-wa801nd-v3|\ - tl-wa830re-v2|\ - tl-wa850re|\ - tl-wa850re-v2|\ - tl-wa855re-v1|\ - tl-wa860re|\ - tl-wa901nd|\ - tl-wa901nd-v2|\ - tl-wa901nd-v3|\ - tl-wa901nd-v4|\ - tl-wa901nd-v5|\ - tl-wdr3320-v2|\ - tl-wdr3500|\ - tl-wdr4300|\ - tl-wdr4900-v2|\ - tl-wdr6500-v2|\ - tl-wpa8630|\ - tl-wr1041n-v2|\ - tl-wr1043nd|\ - tl-wr1043nd-v2|\ - tl-wr1043nd-v4|\ - tl-wr2543n|\ - tl-wr703n|\ - tl-wr710n|\ - tl-wr720n-v3|\ - tl-wr740n-v6|\ - tl-wr741nd|\ - tl-wr741nd-v4|\ - tl-wr802n-v1|\ - tl-wr802n-v2|\ - tl-wr810n|\ - tl-wr810n-v2|\ - tl-wr840n-v2|\ - tl-wr840n-v3|\ - tl-wr841n-v1|\ - tl-wr841n-v7|\ - tl-wr841n-v8|\ - tl-wr841n-v9|\ - tl-wr841n-v11|\ - tl-wr842n-v2|\ - tl-wr842n-v3|\ - tl-wr902ac-v1|\ - tl-wr940n-v4|\ - tl-wr940n-v6|\ - tl-wr941nd|\ - tl-wr941nd-v5|\ - tl-wr941nd-v6|\ - ts-d084|\ - wifi-pineapple-nano) - local magic_ver="0100" - - case "$board" in - tl-wdr3320-v2|tl-wdr6500-v2) - magic_ver="0200" - ;; - esac - - [ "$magic" != "$magic_ver" ] && { - echo "Invalid image type." - return 1 - } - - local hwid - local mid - local imagehwid - local imagemid - - hwid=$(tplink_get_hwid) - mid=$(tplink_get_mid) - imagehwid=$(tplink_get_image_hwid "$1") - imagemid=$(tplink_get_image_mid "$1") - - [ "$hwid" != "$imagehwid" -o "$mid" != "$imagemid" ] && { - echo "Invalid image, hardware ID mismatch, hw:$hwid $mid image:$imagehwid $imagemid." - return 1 - } - - local boot_size - - boot_size=$(tplink_get_image_boot_size "$1") - [ "$boot_size" != "00000000" ] && { - echo "Invalid image, it contains a bootloader." - return 1 - } - - return 0 - ;; - bsb|\ - dir-825-b1|\ - tew-673gru) - dir825b_check_image "$1" && return 0 - ;; - rb-411|\ - rb-411u|\ - rb-433|\ - rb-433u|\ - rb-435g|\ - rb-450|\ - rb-450g|\ - rb-493|\ - rb-493g|\ - rb-750|\ - rb-750gl|\ - rb-751|\ - rb-751g|\ - rb-911g-2hpnd|\ - rb-911g-5hpnd|\ - rb-911g-5hpacd|\ - rb-912uag-2hpnd|\ - rb-912uag-5hpnd|\ - rb-921gs-5hpacd-r2|\ - rb-922uags-5hpacd|\ - rb-951g-2hnd|\ - rb-951ui-2hnd|\ - rb-2011l|\ - rb-2011il|\ - rb-2011ils|\ - rb-2011uas|\ - rb-2011uas-2hnd|\ - rb-2011uias|\ - rb-2011uias-2hnd|\ - rb-2011uias-2hnd-r2|\ - rb-sxt2n|\ - rb-sxt5n) - nand_do_platform_check routerboard $1 - return $? - ;; - c-60|\ - hiveap-121|\ - nbg6716|\ - r6100|\ - rambutan|\ - wi2a-ac200i|\ - wndr3700v4|\ - wndr4300) - nand_do_platform_check $board $1 - return $? - ;; - cpe210|\ - cpe510|\ - eap120|\ - wbs210|\ - wbs510) - tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_get_model_string)" '' && return 0 - return 1 - ;; - cpe210-v2|\ - cpe210-v3) - tplink_pharos_check_image "$1" "01000000" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0 - return 1 - ;; - cpe510-v2) - tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0 - return 1 - ;; - a40|\ - a60|\ - mr1750|\ - mr1750v2|\ - mr600|\ - mr600v2|\ - mr900|\ - mr900v2|\ - om2p|\ - om2p-hs|\ - om2p-hsv2|\ - om2p-hsv3|\ - om2p-hsv4|\ - om2p-lc|\ - om2pv2|\ - om2pv4|\ - om5p|\ - om5p-ac|\ - om5p-acv2|\ - om5p-an) - platform_check_image_openmesh "$magic_long" "$1" && return 0 - return 1 - ;; - mr18|\ - z1) - merakinand_do_platform_check $board $1 - return $? - ;; - dir-869-a1|\ - mynet-n600|\ - mynet-n750|\ - qihoo-c301) - [ "$magic_long" != "5ea3a417" ] && { - echo "Invalid image, bad magic: $magic_long" - return 1 - } - - local typemagic=$(seama_get_type_magic "$1") - [ "$typemagic" != "6669726d" ] && { - echo "Invalid image, bad type: $typemagic" - return 1 - } - - return 0 - ;; - e2100l|\ - mynet-rext|\ - wrt160nl) - cybertan_check_image "$1" && return 0 - return 1 - ;; - nbg6616|\ - uap-pro|\ - unifi-outdoor-plus) - [ "$magic_long" != "19852003" ] && { - echo "Invalid image type." - return 1 - } - - return 0 - ;; - tube2h) - alfa_check_image "$1" && return 0 - return 1 - ;; - wndr3700|\ - wnr1000-v2|\ - wnr2000-v3|\ - wnr612-v2|\ - wpn824n) - local hw_magic - - hw_magic="$(ar71xx_get_mtd_part_magic firmware)" - [ "$magic_long" != "$hw_magic" ] && { - echo "Invalid image, hardware ID mismatch, hw:$hw_magic image:$magic_long." - return 1 - } - - return 0 - ;; - wnr2000-v4) - [ "$magic_long" != "32303034" ] && { - echo "Invalid image type." - return 1 - } - - return 0 - ;; - wnr2200) - [ "$magic_long" != "32323030" ] && { - echo "Invalid image type." - return 1 - } - - return 0 - ;; - dap-2695-a1) - local magic=$(wrgg_get_image_magic "$1") - [ "$magic" != "21030820" ] && { - echo "Invalid image, bad type: $magic" - return 1 - } - - return 0; - ;; - # these boards use metadata images - fritz300e|\ - fritz4020|\ - fritz450e|\ - koala|\ - rb-750-r2|\ - rb-750p-pbr2|\ - rb-750up-r2|\ - rb-911-2hn|\ - rb-911-5hn|\ - rb-931-2nd|\ - rb-941-2nd|\ - rb-951ui-2nd|\ - rb-952ui-5ac2nd|\ - rb-962uigs-5hact2hnt|\ - rb-lhg-5nd|\ - rb-map-2nd|\ - rb-mapl-2nd|\ - rb-sxt-2nd-r3|\ - rb-wap-2nd|\ - rb-wapg-5hact2hnd|\ - rb-wapr-2nd) - return 0 - ;; - esac - - echo "Sysupgrade is not yet supported on $board." - return 1 -} - -platform_do_upgrade_mikrotik_rb() { - CI_KERNPART=none - local fw_mtd=$(find_mtd_part kernel) - fw_mtd="${fw_mtd/block/}" - [ -n "$fw_mtd" ] || return - - local board_dir=$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$') - board_dir=${board_dir%/} - [ -n "$board_dir" ] || return - - mtd erase kernel - tar xf "$1" ${board_dir}/kernel -O | nandwrite -o "$fw_mtd" - - - nand_do_upgrade "$1" -} - -platform_do_upgrade_nokia() { - case "$(fw_printenv -n dualPartition)" in - imgA) - fw_setenv dualPartition imgB - fw_setenv ActImg NokiaImageB - ;; - imgB) - fw_setenv dualPartition imgA - fw_setenv ActImg NokiaImageA - ;; - esac - ubiblock -r /dev/ubiblock0_0 2>/dev/null >/dev/null - rm -f /dev/ubiblock0_0 - ubidetach -d 0 2>/dev/null >/dev/null - CI_UBIPART=ubi_alt - CI_KERNPART=kernel_alt - - nand_do_upgrade "$1" -} - -platform_do_upgrade() { - local board=$(board_name) - - case "$board" in - rb-750-r2|\ - rb-750p-pbr2|\ - rb-750up-r2|\ - rb-911-2hn|\ - rb-911-5hn|\ - rb-931-2nd|\ - rb-941-2nd|\ - rb-951ui-2nd|\ - rb-952ui-5ac2nd|\ - rb-962uigs-5hact2hnt|\ - rb-lhg-5nd|\ - rb-map-2nd|\ - rb-mapl-2nd|\ - rb-sxt-2nd-r3|\ - rb-wap-2nd|\ - rb-wapg-5hact2hnd|\ - rb-wapr-2nd) - # erase firmware if booted from initramfs - [ -z "$(rootfs_type)" ] && mtd erase firmware - ;; - esac - - case "$board" in - all0258n) - platform_do_upgrade_allnet "0x9f050000" "$1" - ;; - all0305|\ - eap7660d|\ - ja76pf|\ - ja76pf2|\ - jwap003|\ - ls-sr71|\ - pb42|\ - pb44|\ - routerstation|\ - routerstation-pro) - platform_do_upgrade_combined "$1" - ;; - all0315n) - platform_do_upgrade_allnet "0x9f080000" "$1" - ;; - cap4200ag|\ - eap300v2|\ - ens202ext) - platform_do_upgrade_allnet "0xbf0a0000" "$1" - ;; - dir-825-b1|\ - tew-673gru) - platform_do_upgrade_dir825b "$1" - ;; - a40|\ - a60|\ - mr1750|\ - mr1750v2|\ - mr600|\ - mr600v2|\ - mr900|\ - mr900v2|\ - om2p|\ - om2p-hs|\ - om2p-hsv2|\ - om2p-hsv3|\ - om2p-hsv4|\ - om2p-lc|\ - om2pv2|\ - om2pv4|\ - om5p|\ - om5p-ac|\ - om5p-acv2|\ - om5p-an) - platform_do_upgrade_openmesh "$1" - ;; - c-60|\ - hiveap-121|\ - nbg6716|\ - r6100|\ - rambutan|\ - wndr3700v4|\ - wndr4300) - nand_do_upgrade "$1" - ;; - mr18|\ - z1) - merakinand_do_upgrade "$1" - ;; - rb-411|\ - rb-411u|\ - rb-433|\ - rb-433u|\ - rb-435g|\ - rb-450|\ - rb-450g|\ - rb-493|\ - rb-493g|\ - rb-750|\ - rb-750gl|\ - rb-751|\ - rb-751g|\ - rb-911g-2hpnd|\ - rb-911g-5hpacd|\ - rb-911g-5hpnd|\ - rb-912uag-2hpnd|\ - rb-912uag-5hpnd|\ - rb-921gs-5hpacd-r2|\ - rb-922uags-5hpacd|\ - rb-951g-2hnd|\ - rb-951ui-2hnd|\ - rb-2011il|\ - rb-2011ils|\ - rb-2011l|\ - rb-2011uas|\ - rb-2011uas-2hnd|\ - rb-2011uias|\ - rb-2011uias-2hnd|\ - rb-2011uias-2hnd-r2|\ - rb-sxt2n|\ - rb-sxt5n) - platform_do_upgrade_mikrotik_rb "$1" - ;; - uap-pro|\ - unifi-outdoor-plus) - MTD_CONFIG_ARGS="-s 0x180000" - default_do_upgrade "$1" - ;; - wi2a-ac200i) - platform_do_upgrade_nokia "$1" - ;; - wp543|\ - wpe72) - platform_do_upgrade_compex "$1" - ;; - *) - default_do_upgrade "$1" - ;; - esac -} |