1 files changed, 0 insertions, 178 deletions
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
deleted file mode 100644
index 8fe57c87cc..0000000000
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ /dev/null
@@ -1,178 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-ath9k_eeprom_die() {
-	echo "ath9k eeprom: " "$*"
-	exit 1
-}
-
-ath9k_eeprom_extract() {
-	local part=$1
-	local offset=$(($2))
-	local count=$(($3))
-	local mtd
-
-	mtd=$(find_mtd_chardev $part)
-	[ -n "$mtd" ] || \
-		ath9k_eeprom_die "no mtd device found for partition $part"
-
-	dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-		ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-ath9k_ubi_eeprom_extract() {
-	local part=$1
-	local offset=$(($2))
-	local count=$(($3))
-	local ubidev=$(nand_find_ubi $CI_UBIPART)
-	local ubi
-
-	ubi=$(nand_find_volume $ubidev $part)
-	[ -n "$ubi" ] || \
-		ath9k_eeprom_die "no UBI volume found for $part"
-
-	dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-		ath9k_eeprom_die "failed to extract from $ubi"
-}
-
-ath9k_eeprom_extract_reverse() {
-	local part=$1
-	local offset=$2
-	local count=$(($3))
-	local mtd
-	local reversed
-	local caldata
-
-	mtd=$(find_mtd_chardev "$part")
-	reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
-
-	for byte in $reversed; do
-		caldata="\x${byte}${caldata}"
-	done
-
-	printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
-}
-
-ath9k_patch_firmware_mac() {
-	local mac=$1
-
-	[ -z "$mac" ] && return
-
-	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=2 count=1
-}
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"soc_wmac.eeprom")
-	case $board in
-	c-55|\
-	c-60)
-		ath9k_eeprom_extract "art" 0x1000 0x800
-		ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
-		;;
-	fritz4020|\
-	fritz450e)
-		ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
-		;;
-	mr18)
-		. /lib/upgrade/nand.sh
-
-		if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
-			ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800
-		else
-			ath9k_eeprom_extract "odm-caldata" 0x1000 0x800
-		fi
-		ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +1)
-		;;
-	r6100 | \
-	wndr3700v4 | \
-	wndr4300)
-		ath9k_eeprom_extract "caldata" 0x1000 0x800
-		ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0x0)
-		;;
-	rambutan)
-		ath9k_eeprom_extract "art" 0x1000 0x800
-		;;
-	wlr8100)
-		ath9k_eeprom_extract "art" 0x1000 0x800
-		ath9k_patch_firmware_mac $(mtd_get_mac_ascii u-boot-env "ethaddr")
-		;;
-	z1)
-		. /lib/upgrade/nand.sh
-
-		if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
-			ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800
-		else
-			ath9k_eeprom_extract "origcaldata" 0x1000 0x800
-		fi
-		ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2)
-		;;
-	*)
-		ath9k_eeprom_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-
-"pci_wmac0.eeprom")
-	case $board in
-	c-55)
-		ath9k_eeprom_extract "art" 0x5000 0x800
-		ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
-		;;
-	fritz300e)
-		ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440
-		;;
-	mr18)
-		. /lib/upgrade/nand.sh
-
-		if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
-			ath9k_ubi_eeprom_extract "caldata" 0x5000 0x800
-		else
-			ath9k_eeprom_extract "odm-caldata" 0x5000 0x800
-		fi
-		ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2)
-		;;
-	wndr3700v4 | \
-	wndr4300)
-		ath9k_eeprom_extract "caldata" 0x5000 0x800
-		ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0xc)
-		;;
-	z1)
-		. /lib/upgrade/nand.sh
-
-		if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
-			ath9k_ubi_eeprom_extract "caldata" 0x15000 0x1000
-		else
-			ath9k_eeprom_extract "origcaldata" 0x15000 0x1000
-		fi
-		ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3)
-		;;
-	*)
-		ath9k_eeprom_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-
-"pci_wmac1.eeprom")
-	case $board in
-	mr18)
-		. /lib/upgrade/nand.sh
-
-		if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
-			ath9k_ubi_eeprom_extract "caldata" 0x9000 0x800
-		else
-			ath9k_eeprom_extract "odm-caldata" 0x9000 0x800
-		fi
-		ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3)
-		;;
-	*)
-		ath9k_eeprom_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-esac