diff options
Diffstat (limited to 'package/boot/uboot-mediatek/patches/410-add-linksys-e8450.patch')
| -rw-r--r-- | package/boot/uboot-mediatek/patches/410-add-linksys-e8450.patch | 70 |
1 files changed, 46 insertions, 24 deletions
diff --git a/package/boot/uboot-mediatek/patches/410-add-linksys-e8450.patch b/package/boot/uboot-mediatek/patches/410-add-linksys-e8450.patch index 5b52206e1c7..08aee125aa8 100644 --- a/package/boot/uboot-mediatek/patches/410-add-linksys-e8450.patch +++ b/package/boot/uboot-mediatek/patches/410-add-linksys-e8450.patch @@ -1,12 +1,13 @@ --- /dev/null +++ b/configs/mt7622_linksys_e8450_defconfig -@@ -0,0 +1,135 @@ +@@ -0,0 +1,140 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_TARGET_MT7622=y -+CONFIG_SYS_TEXT_BASE=0x41e00000 ++CONFIG_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_SYS_LOAD_ADDR=0x40080000 +CONFIG_USE_DEFAULT_ENV_FILE=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_BOOTP_SEND_HOSTNAME=y @@ -16,7 +17,6 @@ +CONFIG_DEBUG_UART_CLOCK=25000000 +CONFIG_DEFAULT_DEVICE_TREE="mt7622-linksys-e8450-ubi" +CONFIG_DEBUG_UART=y -+CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-nand0:512k(bl2),1280k(fip),1024k(factory),256k(reserved),-(ubi)" +CONFIG_SMBIOS_PRODUCT_NAME="" +CONFIG_AUTOBOOT_KEYED=y +CONFIG_BOOTDELAY=30 @@ -57,7 +57,7 @@ +CONFIG_CMD_LINK_LOCAL=y +# CONFIG_CMD_MBR is not set +CONFIG_CMD_MTD=y -+CONFIG_CMD_MTDPART=y ++CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_PING=y @@ -125,12 +125,17 @@ +CONFIG_MTK_SPI_NAND=y +CONFIG_MTK_SPI_NAND_MTD=y +CONFIG_SYSRESET_WATCHDOG=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_WDT_MTK=y +CONFIG_LZO=y +CONFIG_ZSTD=y +CONFIG_HEXDUMP=y +CONFIG_RANDOM_UUID=y +CONFIG_REGEX=y ++CONFIG_USE_IPADDR=y ++CONFIG_IPADDR="192.168.1.1" ++CONFIG_USE_SERVERIP=y ++CONFIG_SERVERIP="192.168.1.254" +CONFIG_USB=y +CONFIG_USB_HOST=y +CONFIG_USB_XHCI_HCD=y @@ -138,7 +143,7 @@ +CONFIG_USB_STORAGE=y --- /dev/null +++ b/arch/arm/dts/mt7622-linksys-e8450-ubi.dts -@@ -0,0 +1,195 @@ +@@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 MediaTek Inc. @@ -146,6 +151,7 @@ + */ + +/dts-v1/; ++#include <dt-bindings/input/linux-event-codes.h> +#include "mt7622.dtsi" +#include "mt7622-u-boot.dtsi" + @@ -169,11 +175,13 @@ + factory { + label = "reset"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; ++ linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&gpio 102 GPIO_ACTIVE_LOW>; ++ linux,code = <KEY_WPS_BUTTON>; + }; + }; + @@ -298,11 +306,27 @@ + pinctrl-0 = <&snfi_pins>; + status = "okay"; + quad-spi; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bl2"; ++ reg = <0x0 0x80000>; ++ }; ++ ++ partition@80000 { ++ label = "ubi"; ++ reg = <0x80000 0x7f80000>; ++ compatible = "linux,ubi"; ++ }; ++ }; +}; + +&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins>; ++ mediatek,force-highspeed; + status = "okay"; +}; + @@ -315,12 +339,12 @@ +ð { + status = "okay"; + mediatek,gmac-id = <0>; -+ phy-mode = "sgmii"; ++ phy-mode = "2500base-x"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 54 GPIO_ACTIVE_HIGH>; + + fixed-link { -+ speed = <1000>; ++ speed = <2500>; + full-duplex; + }; +}; @@ -336,18 +360,18 @@ +}; --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile -@@ -1007,6 +1007,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ +@@ -1422,6 +1422,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt7622-rfb.dtb \ mt7623a-unielec-u7623-02-emmc.dtb \ mt7622-bananapi-bpi-r64.dtb \ + mt7622-linksys-e8450-ubi.dtb \ mt7623n-bananapi-bpi-r2.dtb \ mt7629-rfb.dtb \ - mt8512-bm1-emmc.dtb \ + mt7981-rfb.dtb \ --- /dev/null +++ b/linksys_e8450_env -@@ -0,0 +1,57 @@ -+ethaddr_factory=mtd read spi-nand0 0x40080000 0x220000 0x20000 && env readmem -b ethaddr 0x4009fff4 0x6 ; setenv ethaddr_factory +@@ -0,0 +1,54 @@ ++ethaddr_factory=ubi read 0x40080000 factory && env readmem -b ethaddr 0x400ffff4 0x6 ; setenv ethaddr_factory +ipaddr=192.168.1.1 +serverip=192.168.1.254 +loadaddr=0x48000000 @@ -379,28 +403,26 @@ +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever +boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off +boot_recovery=led $bootled_rec on ; run ubi_read_recovery ; bootm $loadaddr#$bootconf ; ubi remove recovery ; led $bootled_rec off -+boot_serial_write_bl2=loadx $loadaddr 115200 && run boot_write_bl2 -+boot_serial_write_fip=loadx $loadaddr 115200 && run boot_write_fip ++boot_serial_write_bl2=loadx $loadaddr 115200 && run snand_write_bl2 ++boot_serial_write_fip=loadx $loadaddr 115200 && run ubi_write_fip +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && iminfo $loadaddr && ubi part ubi && run ubi_write_production ubi_prepare_rootfs ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp_recovery=tftpboot $loadaddr $bootfile && iminfo $loadaddr && ubi part ubi && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi -+boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run boot_write_bl2 -+boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run boot_write_fip ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run snand_write_bl2 ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run ubi_write_fip +boot_ubi=ubi part ubi && run boot_production ; run boot_recovery -+boot_write_bl2=mtd erase bl2 && mtd write spi-nand0 $loadaddr 0x0 0x20000 && mtd write spi-nand0 $loadaddr 0x20000 0x20000 && mtd write spi-nand0 $loadaddr 0x40000 0x20000 && mtd write spi-nand0 $loadaddr 0x60000 0x20000 -+boot_write_fip=mtd erase fip && mtd write fip $loadaddr -+check_ubi=ubi part ubi || run ubi_format -+reset_factory=ubi part ubi ; ubi write 0x0 ubootenv 0x0 ; ubi write 0x0 ubootenv2 0x0 ; ubi remove rootfs_data -+ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset ++snand_write_bl2=mtd erase bl2 && mtd write spi-nand0 $loadaddr 0x0 0x20000 && mtd write spi-nand0 $loadaddr 0x20000 0x20000 && mtd write spi-nand0 $loadaddr 0x40000 0x20000 && mtd write spi-nand0 $loadaddr 0x60000 0x20000 ++reset_factory=mw $loadaddr 0xff 0x1f000 ; ubi part ubi ; ubi write $loadaddr ubootenv 0x1f000 ; ubi write $loadaddr ubootenv2 0x1f000 ; ubi remove rootfs_data +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi +ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs +ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_fip=ubi check fip || ubi create fip 0x200000 static ; ubi write $loadaddr fip 0x200000 +ubi_write_production=ubi check fit && env exists replacevol && ubi remove fit ; if ubi check fit ; then else run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ; fi +ubi_write_recovery=ubi check recovery && env exists replacevol && ubi remove recovery ; if ubi check recovery ; then else run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ; fi -+_create_env=ubi create ubootenv 0x100000 dynamic ; ubi create ubootenv2 0x100000 dynamic ++_create_env=ubi create ubootenv 0x1f000 dynamic ; ubi create ubootenv2 0x1f000 dynamic +_init_env=setenv _init_env ; if ubi check ubootenv && ubi check ubootenv2 ; then else run _create_env ; fi ; setenv _create_env ; saveenv || run ubi_format ; saveenv || run ubi_format -+_firstboot=setenv _firstboot ; run _switch_to_menu ; run ethaddr_factory ; run check_ubi ; run _init_env ; run boot_first ++_firstboot=setenv _firstboot ; run _switch_to_menu ; run ethaddr_factory ; run _init_env ; run boot_first +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title [33m$ver[0m" |
