diff options
Diffstat (limited to 'openwrt/target/linux/image/generic')
13 files changed, 0 insertions, 1651 deletions
diff --git a/openwrt/target/linux/image/generic/lzma-loader/Makefile b/openwrt/target/linux/image/generic/lzma-loader/Makefile deleted file mode 100644 index 089254bbaf..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/Makefile +++ /dev/null @@ -1,36 +0,0 @@ -# $Id: Makefile 1823 2005-09-01 20:07:42Z nbd $ - -include $(TOPDIR)/rules.mk - -PKG_NAME := loader -PKG_VERSION := 0.05 - -PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)-$(PKG_VERSION) - -$(PKG_BUILD_DIR)/.prepared: - mkdir $(PKG_BUILD_DIR) - $(CP) ./src/* $(PKG_BUILD_DIR)/ - touch $@ - -$(PKG_BUILD_DIR)/lzma.elf: $(PKG_BUILD_DIR)/.prepared $(PKG_BUILD_DIR)/vmlinux.lzma - $(MAKE) -C $(PKG_BUILD_DIR) CC=$(TARGET_CC) \ - LD=$(TARGET_CROSS)ld CROSS_COMPILE=$(TARGET_CROSS) \ - RAMSIZE=$(RAMSIZE) \ - LOADADDR=$(LOADADDR) \ - KERNEL_ENTRY=$(KERNEL_ENTRY) - - -$(PKG_BUILD_DIR)/vmlinux.lzma: $(KDIR)/vmlinux.lzma - $(CP) $< $@ - -$(KDIR)/loader.elf: $(PKG_BUILD_DIR)/lzma.elf - $(CP) $< $@ - -source: -prepare: $(PKG_BUILD_DIR)/.prepared -compile: $(KDIR)/loader.elf -install: - -clean: - rm -rf $(PKG_BUILD_DIR) - rm -f $(KDIR)/loader.elf diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/LzmaDecode.c b/openwrt/target/linux/image/generic/lzma-loader/src/LzmaDecode.c deleted file mode 100644 index c90a0d3ef4..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/src/LzmaDecode.c +++ /dev/null @@ -1,590 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.22 Copyright (c) 1999-2005 Igor Pavlov (2005-06-10) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#ifndef Byte -#define Byte unsigned char -#endif - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - -#ifdef _LZMA_IN_CB - -#define RC_TEST { if (Buffer == BufferLim) \ - { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ - BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} - -#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 - -#else - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - -#endif - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -#if 0 -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) -{ - unsigned char prop0; - if (size < LZMA_PROPERTIES_SIZE) - return LZMA_RESULT_DATA_ERROR; - prop0 = propsData[0]; - if (prop0 >= (9 * 5 * 5)) - return LZMA_RESULT_DATA_ERROR; - { - for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); - for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); - propsRes->lc = prop0; - /* - unsigned char remainder = (unsigned char)(prop0 / 9); - propsRes->lc = prop0 % 9; - propsRes->pb = remainder / 5; - propsRes->lp = remainder % 5; - */ - } - - #ifdef _LZMA_OUT_READ - { - int i; - propsRes->DictionarySize = 0; - for (i = 0; i < 4; i++) - propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8); - if (propsRes->DictionarySize == 0) - propsRes->DictionarySize = 1; - } - #endif - return LZMA_RESULT_OK; -} -#endif - -#define kLzmaStreamWasFinishedId (-1) - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) -{ - CProb *p = vs->Probs; - SizeT nowPos = 0; - Byte previousByte = 0; - UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; - UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; - int lc = vs->Properties.lc; - - #ifdef _LZMA_OUT_READ - - UInt32 Range = vs->Range; - UInt32 Code = vs->Code; - #ifdef _LZMA_IN_CB - const Byte *Buffer = vs->Buffer; - const Byte *BufferLim = vs->BufferLim; - #else - const Byte *Buffer = inStream; - const Byte *BufferLim = inStream + inSize; - #endif - int state = vs->State; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - UInt32 distanceLimit = vs->DistanceLimit; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->Properties.DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - Byte tempDictionary[4]; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - if (len == kLzmaStreamWasFinishedId) - return LZMA_RESULT_OK; - - if (dictionarySize == 0) - { - dictionary = tempDictionary; - dictionarySize = 1; - tempDictionary[0] = vs->TempDictionary[0]; - } - - if (len == kLzmaNeedInitId) - { - { - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - UInt32 i; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - rep0 = rep1 = rep2 = rep3 = 1; - state = 0; - globalPos = 0; - distanceLimit = 0; - dictionaryPos = 0; - dictionary[dictionarySize - 1] = 0; - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - } - len = 0; - } - while(len != 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; - - #else /* if !_LZMA_OUT_READ */ - - int state = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - int len = 0; - const Byte *Buffer; - const Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - - { - UInt32 i; - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - } - - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - - #endif /* _LZMA_OUT_READ */ - - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - UpdateBit0(prob); - - #ifdef _LZMA_OUT_READ - if (distanceLimit == 0) - #else - if (nowPos == 0) - #endif - return LZMA_RESULT_DATA_ERROR; - - state = state < kNumLitStates ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - #endif - - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = kLzmaStreamWasFinishedId; - break; - } - } - - len += kMatchMinLen; - #ifdef _LZMA_OUT_READ - if (rep0 > distanceLimit) - #else - if (rep0 > nowPos) - #endif - return LZMA_RESULT_DATA_ERROR; - - #ifdef _LZMA_OUT_READ - if (dictionarySize - distanceLimit > (UInt32)len) - distanceLimit += len; - else - distanceLimit = dictionarySize; - #endif - - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - #ifdef _LZMA_OUT_READ - vs->Range = Range; - vs->Code = Code; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + (UInt32)nowPos; - vs->DistanceLimit = distanceLimit; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->RemainLen = len; - vs->TempDictionary[0] = tempDictionary[0]; - #endif - - #ifdef _LZMA_IN_CB - vs->Buffer = Buffer; - vs->BufferLim = BufferLim; - #else - *inSizeProcessed = (SizeT)(Buffer - inStream); - #endif - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/LzmaDecode.h b/openwrt/target/linux/image/generic/lzma-loader/src/LzmaDecode.h deleted file mode 100644 index 213062af12..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/src/LzmaDecode.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.21 Copyright (c) 1999-2005 Igor Pavlov (2005-06-08) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -/* #define _LZMA_SYSTEM_SIZE_T */ -/* Use system's size_t. You can use it to enable 64-bit sizes supporting*/ - -#ifndef UInt32 -#ifdef _LZMA_UINT32_IS_ULONG -#define UInt32 unsigned long -#else -#define UInt32 unsigned int -#endif -#endif - -#ifndef SizeT -#ifdef _LZMA_SYSTEM_SIZE_T -#include <stddef.h> -#define SizeT size_t -#else -#define SizeT UInt32 -#endif -#endif - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb unsigned short -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -#define LZMA_PROPERTIES_SIZE 5 - -typedef struct _CLzmaProperties -{ - int lc; - int lp; - int pb; - #ifdef _LZMA_OUT_READ - UInt32 DictionarySize; - #endif -}CLzmaProperties; - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); - -#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) - -#define kLzmaNeedInitId (-2) - -typedef struct _CLzmaDecoderState -{ - CLzmaProperties Properties; - CProb *Probs; - - #ifdef _LZMA_IN_CB - const unsigned char *Buffer; - const unsigned char *BufferLim; - #endif - - #ifdef _LZMA_OUT_READ - unsigned char *Dictionary; - UInt32 Range; - UInt32 Code; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 DistanceLimit; - UInt32 Reps[4]; - int State; - int RemainLen; - unsigned char TempDictionary[4]; - #endif -} CLzmaDecoderState; - -#ifdef _LZMA_OUT_READ -#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; } -#endif - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); - -#endif diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/Makefile b/openwrt/target/linux/image/generic/lzma-loader/src/Makefile deleted file mode 100644 index 8dfd76a6a2..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/src/Makefile +++ /dev/null @@ -1,42 +0,0 @@ -LOADADDR = 0x80400000 # RAM start + 4M -KERNEL_ENTRY = 0x80001000 -RAMSIZE = 0x00100000 # 1MB - -CROSS_COMPILE = mips-linux- - -.S.s: - $(CPP) $(CFLAGS) $< -o $*.s -.S.o: - $(CC) $(CFLAGS) -c $< -o $*.o -.c.o: - $(CC) $(CFLAGS) -c $< -o $*.o - -CC = $(CROSS_COMPILE)gcc -LD = $(CROSS_COMPILE)ld -OBJCOPY = $(CROSS_COMPILE)objcopy -OBJDUMP = $(CROSS_COMPILE)objdump - -CFLAGS = -fno-builtin -Os -G 0 -mno-abicalls -fno-pic -Wall -DRAMSIZE=${RAMSIZE} -DKERNEL_ENTRY=${KERNEL_ENTRY} -D_LZMA_IN_CB -# CFLAGS = -fno-builtin -Os -G 0 -mno-abicalls -fno-pic -Wall -DRAMSIZE=${RAMSIZE} - -O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32) - -# Drop some uninteresting sections in the kernel. -# This is only relevant for ELF kernels but doesn't hurt a.out -drop-sections = .reginfo .mdebug .comment -strip-flags = $(addprefix --remove-section=,$(drop-sections)) - - -all : lzma.elf - -lzma.lds: lzma.lds.in - sed -e 's,@LOADADDR@,$(LOADADDR),g' $< >$@ - -kernel.o: vmlinux.lzma lzma.lds - $(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $< - -lzma.elf: start.o decompress.o LzmaDecode.o kernel.o - $(LD) -s -Tlzma.lds -o $@ $^ - -clean: - rm -f *.o lzma.elf diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/decompress.c b/openwrt/target/linux/image/generic/lzma-loader/src/decompress.c deleted file mode 100644 index f602276ddc..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/src/decompress.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * LZMA compressed kernel decompressor for bcm947xx boards - * - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * Please note, this was code based on the bunzip2 decompressor code - * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left - * is an idea and part of original vendor code - * - * - * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com> - * pass actual output size to decoder (stream mode - * compressed input is not a requirement anymore) - * - * 24-Apr-2005 Oleg I. Vdovikin - * reordered functions using lds script, removed forward decl - * - * ??-Nov-2005 Mike Baker - * reorder the script as an lzma wrapper; do not depend on flash access - */ - -#include "LzmaDecode.h" - -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 - -#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - -#define cache_unroll(base,op) \ - __asm__ __volatile__( \ - ".set noreorder;\n" \ - ".set mips3;\n" \ - "cache %1, (%0);\n" \ - ".set mips0;\n" \ - ".set reorder\n" \ - : \ - : "r" (base), \ - "i" (op)); - - -static __inline__ void blast_icache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Invalidate_I); - start += lsize; - } -} - -static __inline__ void blast_dcache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Writeback_Inv_D); - start += lsize; - } -} - -unsigned char *data; - -static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize) -{ - *bufferSize = 1; - *buffer = data; - ++data; - return LZMA_RESULT_OK; -} - -static __inline__ unsigned char get_byte(void) -{ - unsigned char *buffer; - UInt32 fake; - - return read_byte(0, &buffer, &fake), *buffer; -} - -static char *buffer = (char *)0x80C00000; -extern char lzma_start[]; -extern char lzma_end[]; - -/* should be the first function */ -void entry(unsigned long icache_size, unsigned long icache_lsize, - unsigned long dcache_size, unsigned long dcache_lsize) -{ - unsigned int i; /* temp value */ - unsigned int osize; /* uncompressed size */ - - ILzmaInCallback callback; - CLzmaDecoderState vs; - callback.Read = read_byte; - - data = lzma_start; - - /* lzma args */ - i = get_byte(); - vs.Properties.lc = i % 9, i = i / 9; - vs.Properties.lp = i % 5, vs.Properties.pb = i / 5; - - vs.Probs = (CProb *)buffer; - - /* skip rest of the LZMA coder property */ - for (i = 0; i < 4; i++) - get_byte(); - - /* read the lower half of uncompressed size in the header */ - osize = ((unsigned int)get_byte()) + - ((unsigned int)get_byte() << 8) + - ((unsigned int)get_byte() << 16) + - ((unsigned int)get_byte() << 24); - - /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) - get_byte(); - - /* decompress kernel */ - if ((i = LzmaDecode(&vs, &callback, - (unsigned char*)KERNEL_ENTRY, osize, &osize)) == LZMA_RESULT_OK) - { - blast_dcache(dcache_size, dcache_lsize); - blast_icache(icache_size, icache_lsize); - - /* Jump to load address */ - ((void (*)(void)) KERNEL_ENTRY)(); - } -} diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/lzma.lds.in b/openwrt/target/linux/image/generic/lzma-loader/src/lzma.lds.in deleted file mode 100644 index 5ac555bf7d..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/src/lzma.lds.in +++ /dev/null @@ -1,23 +0,0 @@ -OUTPUT_ARCH(mips) -ENTRY(_start) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = @LOADADDR@; - .text : - { - _ftext = . ; - *(.text) - *(.rodata) - lzma_start = .; - kernel.o - lzma_end = .; - } =0 - - .reginfo : { *(.reginfo) } - - .bss : - { - *(.bss) - } -} diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/print.c b/openwrt/target/linux/image/generic/lzma-loader/src/print.c deleted file mode 100644 index 950687beff..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/src/print.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include "print.h" - -/* macros */ -#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') ) -#define Ctod(x) ( (x) - '0') - -/* forward declaration */ -extern int PrintChar(char *, char, int, int); -extern int PrintString(char *, char *, int, int); -extern int PrintNum(char *, unsigned long, int, int, int, int, char, int); - -/* private variable */ -static const char theFatalMsg[] = "fatal error in lp_Print!"; - -/* -*- - * A low level printf() function. - */ -void -lp_Print(void (*output)(void *, char *, int), - void * arg, - char *fmt, - va_list ap) -{ - -#define OUTPUT(arg, s, l) \ - { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \ - (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \ - } else { \ - (*output)(arg, s, l); \ - } \ - } - - char buf[LP_MAX_BUF]; - - char c; - char *s; - long int num; - - int longFlag; - int negFlag; - int width; - int prec; - int ladjust; - char padc; - - int length; - - for(;;) { - { - /* scan for the next '%' */ - char *fmtStart = fmt; - while ( (*fmt != '\0') && (*fmt != '%')) { - fmt ++; - } - - /* flush the string found so far */ - OUTPUT(arg, fmtStart, fmt-fmtStart); - - /* are we hitting the end? */ - if (*fmt == '\0') break; - } - - /* we found a '%' */ - fmt ++; - - /* check for long */ - if (*fmt == 'l') { - longFlag = 1; - fmt ++; - } else { - longFlag = 0; - } - - /* check for other prefixes */ - width = 0; - prec = -1; - ladjust = 0; - padc = ' '; - - if (*fmt == '-') { - ladjust = 1; - fmt ++; - } - - if (*fmt == '0') { - padc = '0'; - fmt++; - } - - if (IsDigit(*fmt)) { - while (IsDigit(*fmt)) { - width = 10 * width + Ctod(*fmt++); - } - } - - if (*fmt == '.') { - fmt ++; - if (IsDigit(*fmt)) { - prec = 0; - while (IsDigit(*fmt)) { - prec = prec*10 + Ctod(*fmt++); - } - } - } - - - /* check format flag */ - negFlag = 0; - switch (*fmt) { - case 'b': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'd': - case 'D': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - if (num < 0) { - num = - num; - negFlag = 1; - } - length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'o': - case 'O': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'u': - case 'U': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'x': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'X': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1); - OUTPUT(arg, buf, length); - break; - - case 'c': - c = (char)va_arg(ap, int); - length = PrintChar(buf, c, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case 's': - s = (char*)va_arg(ap, char *); - length = PrintString(buf, s, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case '\0': - fmt --; - break; - - default: - /* output this char as it is */ - OUTPUT(arg, fmt, 1); - } /* switch (*fmt) */ - - fmt ++; - } /* for(;;) */ - - /* special termination call */ - OUTPUT(arg, "\0", 1); -} - - -/* --------------- local help functions --------------------- */ -int -PrintChar(char * buf, char c, int length, int ladjust) -{ - int i; - - if (length < 1) length = 1; - if (ladjust) { - *buf = c; - for (i=1; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-1; i++) buf[i] = ' '; - buf[length - 1] = c; - } - return length; -} - -int -PrintString(char * buf, char* s, int length, int ladjust) -{ - int i; - int len=0; - char* s1 = s; - while (*s1++) len++; - if (length < len) length = len; - - if (ladjust) { - for (i=0; i< len; i++) buf[i] = s[i]; - for (i=len; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-len; i++) buf[i] = ' '; - for (i=length-len; i < length; i++) buf[i] = s[i-length+len]; - } - return length; -} - -int -PrintNum(char * buf, unsigned long u, int base, int negFlag, - int length, int ladjust, char padc, int upcase) -{ - /* algorithm : - * 1. prints the number from left to right in reverse form. - * 2. fill the remaining spaces with padc if length is longer than - * the actual length - * TRICKY : if left adjusted, no "0" padding. - * if negtive, insert "0" padding between "0" and number. - * 3. if (!ladjust) we reverse the whole string including paddings - * 4. otherwise we only reverse the actual string representing the num. - */ - - int actualLength =0; - char *p = buf; - int i; - - do { - int tmp = u %base; - if (tmp <= 9) { - *p++ = '0' + tmp; - } else if (upcase) { - *p++ = 'A' + tmp - 10; - } else { - *p++ = 'a' + tmp - 10; - } - u /= base; - } while (u != 0); - - if (negFlag) { - *p++ = '-'; - } - - /* figure out actual length and adjust the maximum length */ - actualLength = p - buf; - if (length < actualLength) length = actualLength; - - /* add padding */ - if (ladjust) { - padc = ' '; - } - if (negFlag && !ladjust && (padc == '0')) { - for (i = actualLength-1; i< length-1; i++) buf[i] = padc; - buf[length -1] = '-'; - } else { - for (i = actualLength; i< length; i++) buf[i] = padc; - } - - - /* prepare to reverse the string */ - { - int begin = 0; - int end; - if (ladjust) { - end = actualLength - 1; - } else { - end = length -1; - } - - while (end > begin) { - char tmp = buf[begin]; - buf[begin] = buf[end]; - buf[end] = tmp; - begin ++; - end --; - } - } - - /* adjust the string pointer */ - return length; -} diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/print.h b/openwrt/target/linux/image/generic/lzma-loader/src/print.h deleted file mode 100644 index b051463909..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/src/print.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _print_h_ -#define _print_h_ - -#include <stdarg.h> - -/* this is the maximum width for a variable */ -#define LP_MAX_BUF 80 - -/* -*- - * output function takes an void pointer which is passed in as the - * second argument in lp_Print(). This black-box argument gives output - * function a way to track state. - * - * The second argument in output function is a pointer to char buffer. - * The third argument specifies the number of chars to outputed. - * - * output function cannot assume the buffer is null-terminated after - * l number of chars. - */ -void lp_Print(void (*output)(void *, char *, int), - void * arg, - char *fmt, - va_list ap); - -#endif diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/printf.c b/openwrt/target/linux/image/generic/lzma-loader/src/printf.c deleted file mode 100644 index 49bd50d7c7..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/src/printf.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include "printf.h" -#include "print.h" -#include "uart16550.h" - -static void myoutput(void *arg, char *s, int l) -{ - int i; - - // special termination call - if ((l==1) && (s[0] == '\0')) return; - - for (i=0; i< l; i++) { - Uart16550Put(s[i]); - if (s[i] == '\n') Uart16550Put('\r'); - } -} - -void printf(char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - lp_Print(myoutput, 0, fmt, ap); - va_end(ap); -} diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/printf.h b/openwrt/target/linux/image/generic/lzma-loader/src/printf.h deleted file mode 100644 index 9b1c1df232..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/src/printf.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _printf_h_ -#define _printf_h_ - -#include <stdarg.h> -void printf(char *fmt, ...); - -#endif /* _printf_h_ */ diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/start.S b/openwrt/target/linux/image/generic/lzma-loader/src/start.S deleted file mode 100644 index 37c7ca36d3..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/src/start.S +++ /dev/null @@ -1,136 +0,0 @@ -#include <asm/asm.h> -#include <asm/regdef.h> - -#define KSEG0 0x80000000 - -#define C0_CONFIG $16 -#define C0_TAGLO $28 -#define C0_TAGHI $29 - -#define CONF1_DA_SHIFT 7 /* D$ associativity */ -#define CONF1_DA_MASK 0x00000380 -#define CONF1_DA_BASE 1 -#define CONF1_DL_SHIFT 10 /* D$ line size */ -#define CONF1_DL_MASK 0x00001c00 -#define CONF1_DL_BASE 2 -#define CONF1_DS_SHIFT 13 /* D$ sets/way */ -#define CONF1_DS_MASK 0x0000e000 -#define CONF1_DS_BASE 64 -#define CONF1_IA_SHIFT 16 /* I$ associativity */ -#define CONF1_IA_MASK 0x00070000 -#define CONF1_IA_BASE 1 -#define CONF1_IL_SHIFT 19 /* I$ line size */ -#define CONF1_IL_MASK 0x00380000 -#define CONF1_IL_BASE 2 -#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ -#define CONF1_IS_MASK 0x01c00000 -#define CONF1_IS_BASE 64 - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - -LEAF(_start) - - .set mips32 - .set noreorder - - /* set up stack */ - li sp, 0xa0000000 + RAMSIZE - 16 - - - /* At this point we need to invalidate dcache and */ - /* icache before jumping to new code */ - -1: /* Get cache sizes */ - mfc0 s0,C0_CONFIG,1 - - li s1,CONF1_DL_MASK - and s1,s0 - beq s1,zero,nodc - nop - - srl s1,CONF1_DL_SHIFT - li t0,CONF1_DL_BASE - sll s1,t0,s1 /* s1 has D$ cache line size */ - - li s2,CONF1_DA_MASK - and s2,s0 - srl s2,CONF1_DA_SHIFT - addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */ - - li t0,CONF1_DS_MASK - and t0,s0 - srl t0,CONF1_DS_SHIFT - li s3,CONF1_DS_BASE - sll s3,s3,t0 /* s3 has D$ sets per way */ - - multu s2,s3 /* sets/way * associativity */ - mflo t0 /* total cache lines */ - - multu s1,t0 /* D$ linesize * lines */ - mflo s2 /* s2 is now D$ size in bytes */ - - /* Initilize the D$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s2 /* + size of cache == end */ - -1: cache Index_Writeback_Inv_D,0(t0) - bne t0,t1,1b - addu t0,s1 - -nodc: - /* Now we get to do it all again for the I$ */ - - move s3,zero /* just in case there is no icache */ - move s4,zero - - li t0,CONF1_IL_MASK - and t0,s0 - beq t0,zero,noic - nop - - srl t0,CONF1_IL_SHIFT - li s3,CONF1_IL_BASE - sll s3,t0 /* s3 has I$ cache line size */ - - li t0,CONF1_IA_MASK - and t0,s0 - srl t0,CONF1_IA_SHIFT - addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */ - - li t0,CONF1_IS_MASK - and t0,s0 - srl t0,CONF1_IS_SHIFT - li s5,CONF1_IS_BASE - sll s5,t0 /* s5 has I$ sets per way */ - - multu s4,s5 /* sets/way * associativity */ - mflo t0 /* s4 is now total cache lines */ - - multu s3,t0 /* I$ linesize * lines */ - mflo s4 /* s4 is cache size in bytes */ - - /* Initilize the I$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s4 /* + size of cache == end */ - -1: cache Index_Invalidate_I,0(t0) - bne t0,t1,1b - addu t0,s3 -noic: - /* jump to main */ - move a0,s3 /* icache line size */ - move a1,s4 /* icache size */ - move a2,s1 /* dcache line size */ - jal entry - move a3,s2 /* dcache size */ - - .set reorder -END(_start) - diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/uart16550.c b/openwrt/target/linux/image/generic/lzma-loader/src/uart16550.c deleted file mode 100644 index 7df5727600..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/src/uart16550.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - - -#include "uart16550.h" - -/* === CONFIG === */ - -#define BASE 0xb8058000 -#define MAX_BAUD 1152000 -#define REG_OFFSET 4 - -/* === END OF CONFIG === */ - -/* register offset */ -#define OFS_RCV_BUFFER (0*REG_OFFSET) -#define OFS_TRANS_HOLD (0*REG_OFFSET) -#define OFS_SEND_BUFFER (0*REG_OFFSET) -#define OFS_INTR_ENABLE (1*REG_OFFSET) -#define OFS_INTR_ID (2*REG_OFFSET) -#define OFS_DATA_FORMAT (3*REG_OFFSET) -#define OFS_LINE_CONTROL (3*REG_OFFSET) -#define OFS_MODEM_CONTROL (4*REG_OFFSET) -#define OFS_RS232_OUTPUT (4*REG_OFFSET) -#define OFS_LINE_STATUS (5*REG_OFFSET) -#define OFS_MODEM_STATUS (6*REG_OFFSET) -#define OFS_RS232_INPUT (6*REG_OFFSET) -#define OFS_SCRATCH_PAD (7*REG_OFFSET) - -#define OFS_DIVISOR_LSB (0*REG_OFFSET) -#define OFS_DIVISOR_MSB (1*REG_OFFSET) - - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (*((volatile uint32*)(BASE + y))) -#define UART16550_WRITE(y, z) ((*((volatile uint32*)(BASE + y))) = z) - -#define DEBUG_LED (*(unsigned short*)0xb7ffffc0) -#define OutputLED(x) (DEBUG_LED = x) - -void Uart16550Init(uint32 baud, uint8 data, uint8 parity, uint8 stop) -{ - /* disable interrupts */ - UART16550_WRITE(OFS_INTR_ENABLE, 0); - - /* set up buad rate */ - { - uint32 divisor; - - /* set DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x80); - - /* set divisor */ - divisor = MAX_BAUD / baud; - UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); - UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00)>>8); - - /* clear DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x0); - } - - /* set data format */ - UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); -} - -uint8 Uart16550GetPoll() -{ - while((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); - return UART16550_READ(OFS_RCV_BUFFER); -} - - -void Uart16550Put(uint8 byte) -{ - while ((UART16550_READ(OFS_LINE_STATUS) &0x20) == 0); - UART16550_WRITE(OFS_SEND_BUFFER, byte); -} - diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/uart16550.h b/openwrt/target/linux/image/generic/lzma-loader/src/uart16550.h deleted file mode 100644 index b3fd6fdd75..0000000000 --- a/openwrt/target/linux/image/generic/lzma-loader/src/uart16550.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _uart16550_h_ -#define _uart16550_h_ - -typedef unsigned char uint8; -typedef unsigned int uint32; - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - -void Uart16550Init(uint32 baud, uint8 data, uint8 parity, uint8 stop); - -/* blocking call */ -uint8 Uart16550GetPoll(); - -void Uart16550Put(uint8 byte); - -#endif |