411 files changed, 0 insertions, 286064 deletions

diff --git a/openwrt/target/linux/Config.in b/openwrt/target/linux/Config.in
deleted file mode 100644
index eae8b43e9a..0000000000
--- a/openwrt/target/linux/Config.in
+++ /dev/null
@@ -1,780 +0,0 @@
-menu "Target Root Filesystem"
-
-	config BR2_TARGET_ROOTFS_JFFS2
-		bool "jffs2"
-		default y
-		help
-		  Build a jffs2 root filesystem
-
-	config BR2_TARGET_ROOTFS_SQUASHFS_LZMA
-		bool "squashfs-lzma"
-		default y
-		depends !BR2_LINUX_2_6_ARUBA
-		depends !BR2_LINUX_2_6_XSCALE
-		help
-		  Build a squashfs-lzma root filesystem
-
-	config BR2_TARGET_ROOTFS_TGZ
-		bool "tgz"
-		default y
-		help
-		  Build a compressed tar archive of the the root filesystem
-
-endmenu
-
-menu "Kernel Configuration / Device Support"
-
-comment "Device specific configuration"
-
-source "target/linux/*-2.[46]/Config.in"
-
-comment "Kernel modules"
-
-menu "Networking modules"
-
-config BR2_PACKAGE_KMOD_ATM
-	prompt "kmod-atm.......................... ATM support"
-	tristate
-	default y if BR2_LINUX_2_4_AR7
-	default m
-	help
-	  ATM support
-
-config BR2_PACKAGE_KMOD_GRE
-	prompt "kmod-gre.......................... GRE tunneling driver"
-	tristate
-	default m
-	help
-	  Kernel support for GRE tunnels
-	
-config BR2_PACKAGE_KMOD_IMQ
-        prompt "kmod-imq.......................... Intermediate Queueing device"
-        tristate
-        default m
-        help
-          Kernel support for the Intermediate Queueing device
-
-config BR2_PACKAGE_KMOD_IPIP
-	prompt "kmod-ipip......................... IP in IP encapsulation support"
-	tristate
-	default m
-	help
-	  Kernel module for IP in IP encapsulation
-
-config BR2_PACKAGE_KMOD_IPV6
-	prompt "kmod-ipv6......................... IPv6 support"
-	tristate
-	default m
-	help
-	  Kernel modules for IPv6 protocol support
-
-config BR2_PACKAGE_KMOD_PPP
-	prompt "kmod-ppp.......................... PPP support"
-	tristate
-	default m
-	help
-	  Kernel support for PPP
-
-config BR2_PACKAGE_KMOD_MPPE
-	prompt   "kmod-mppe....................... PPP MPPE/MPPC module"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_PPP
-	select BR2_PACKAGE_KMOD_CRYPTO
-	help
-	  Support for Microsoft PPP Encryption/Compression
-
-config BR2_PACKAGE_KMOD_PPPOATM
-	prompt   "kmod-pppoatm.................... PPPoA (PPP over ATM) kernel support"
-	tristate
-	default y if BR2_LINUX_2_4_AR7
-	default m
-	depends BR2_PACKAGE_KMOD_PPP
-	select BR2_PACKAGE_KMOD_ATM
-	help
-	  Support for PPP over ATM
-
-config BR2_PACKAGE_KMOD_PPPOE
-	prompt   "kmod-pppoe...................... PPPoE (PPP over Ethernet) kernel support"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_PPP
-	help
-	  Support for PPP over Ethernet
-
-config BR2_PACKAGE_KMOD_RING
-	prompt "kmod-ring......................... PF Ring"
-	tristate
-	default m
-	help
-	  PF Ring
-
-config BR2_PACKAGE_KMOD_SCHED
-	prompt "kmod-sched........................ Traffic schedulers"
-	tristate
-	default m
-	help
-	  Kernel schedulers for IP traffic
-
-config BR2_PACKAGE_KMOD_TUN
-	prompt "kmod-tun.......................... Universal TUN/TAP driver"
-	tristate
-	default m
-	help
-	  Kernel support for the TUN/TAP tunneling device
-
-endmenu
-
-menu "Filtering/Firewalling"
-
-config BR2_PACKAGE_KMOD_ARPTABLES
-	prompt "kmod-arptables.................... ARP firewalling support"
-	tristate
-	default m
-	help
-	  Kernel modules for ARP firewalling
-
-config BR2_PACKAGE_KMOD_EBTABLES
-	prompt "kmod-ebtables..................... Ethernet Bridge firewalling support"
-	tristate
-	default m
-	help
-	  Kernel modules for bridge firewalling
-
-config BR2_PACKAGE_KMOD_IPTABLES
-	prompt "kmod-iptables..................... Core Netfilter modules for IPv4 firewalling"
-	tristate
-	default y
-	help
-	  Kernel modules for IPv4 firewalling
-
-config BR2_PACKAGE_KMOD_IPTABLES_EXTRA
-	prompt "kmod-iptables-extra............... Extra Netfilter modules for IPv4 firewalling (meta-package)"
-	tristate
-	default m
-	select BR2_PACKAGE_KMOD_IPT_CONNTRACK
-	select BR2_PACKAGE_KMOD_IPT_FILTER
-	select BR2_PACKAGE_KMOD_IPT_IPOPT
-	select BR2_PACKAGE_KMOD_IPT_IPSEC
-	select BR2_PACKAGE_KMOD_IPT_NAT
-	select BR2_PACKAGE_KMOD_IPT_NAT_EXTRA
-	select BR2_PACKAGE_KMOD_IPT_QUEUE
-	select BR2_PACKAGE_KMOD_IPT_ULOG
-	select BR2_PACKAGE_KMOD_IPT_EXTRA
-	help
-	  Extra Netfilter kernel modules for IPv4 firewalling (meta-package)
-
-config BR2_PACKAGE_KMOD_IPT_CONNTRACK
-	prompt "kmod-ipt-conntrack................ Netfilter modules for connection tracking"
-	tristate
-	default m
-	help
-	  Netfilter (IPv4) kernel modules for connection tracking
-
-	  Includes:
-	    * ipt_conntrack
-	    * ipt_helper
-	    * ipt_connmark/CONNMARK
-
-config BR2_PACKAGE_KMOD_IPT_FILTER
-	prompt "kmod-ipt-filter................... Netfilter modules for packet content inspection"
-	tristate
-	default m
-	help
-	  Netfilter (IPv4) kernel modules for packet content inspection
-
-	  Includes:
-	    * ipt_ipp2p
-	    * ipt_layer7
-
-config BR2_PACKAGE_KMOD_IPT_IPOPT
-	prompt "kmod-ipt-ipopt.................... Netfilter modules for matching/changing IP packet options"
-	tristate
-	default m
-	help
-	  Netfilter (IPv4) kernel modules for matching/changing IP packet options
-	  
-	  Includes:
-	    * ipt_dscp/DSCP
-	    * ipt_ecn/ECN
-	    * ipt_length
-	    * ipt_mac
-	    * ipt_tos/TOS
-	    * ipt_tcpmms
-	    * ipt_ttl/TTL
-	    * ipt_unclean
-
-config BR2_PACKAGE_KMOD_IPT_IPSEC
-	prompt "kmod-ipt-ipsec.................... Netfilter modules for matching IPsec packets"
-	tristate
-	default m
-	help
-	  Netfilter (IPv4) kernel modules for matching IPsec packets
-	  
-	  Includes:
-	    * ipt_ah
-	    * ipt_esp
-
-config BR2_PACKAGE_KMOD_IPT_NAT
-	prompt "kmod-ipt-nat...................... Netfilter modules for different NAT targets"
-	tristate
-	default m
-	help
-	  Netfilter (IPv4) kernel modules for different NAT targets
-
-	  Includes: 
-	    * ipt_REDIRECT
-
-config BR2_PACKAGE_KMOD_IPT_NAT_EXTRA
-	prompt "kmod-ipt-nat-extra................ Extra Netfilter NAT modules for special protocols"
-	tristate
-	default m
-	help
-	  Extra Netfilter (IPv4) NAT kernel modules for special protocols
-	  
-	  Includes:
-	    * ip_conntrack_amanda
-	    * ip_conntrack_proto_gre
-	    * ip_nat_proto_gre
-	    * ip_conntrack_pptp
-	    * ip_nat_pptp
-	    * ip_conntrack_sip
-	    * ip_nat_sip
-	    * ip_nat_snmp_basic
-	    * ip_conntrack_tftp
-
-config BR2_PACKAGE_KMOD_IPT_QUEUE
-	prompt "kmod-ipt-queue.................... Netfilter module for user-space packet queueing"
-	tristate
-	default m
-	help
-	  Netfilter (IPv4) module for user-space packet queueing
-	  
-	  Includes:
-	    * ipt_QUEUE
-
-config BR2_PACKAGE_KMOD_IPT_ULOG
-	prompt "kmod-ipt-ulog..................... Netfilter module for user-space packet logging"
-	tristate
-	default m
-	help
-	  Netfilter (IPv4) module for user-space packet logging
-	  
-	  Includes:
-	    * ipt_ULOG
-
-config BR2_PACKAGE_KMOD_IPT_EXTRA
-	prompt "kmod-ipt-extra.................... Other extra Netfilter modules"
-	tristate
-	default m
-	help
-	  Other extra Netfilter (IPv4) kernel modules
-
-	  Includes:
-	    * ipt_limit
-	    * ipt_owner
-	    * ipt_physdev
-	    * ipt_pkttype
-	    * ipt_recent
-
-config BR2_PACKAGE_KMOD_IP6TABLES
-	prompt "kmod-ip6tables.................... Kernel modules for ip6tables"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_IPV6
-	help
-	  IPv6 firewalling support
-
-endmenu
-
-menu "Block devices support"
-
-config BR2_PACKAGE_KMOD_IDE
-	prompt "kmod-ide.......................... IDE support"
-	tristate
-	default m
-	depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM
-	help
-	  Kernel modules for IDE support
-	  useful for usb mass storage devices (e.g. on WL-HDD)
-	  
-	  Includes:
-	    - ide-core
-	    - ide-detect
-	    - ide-disk
-	    - pdc202xx_old
-
-config BR2_PACKAGE_KMOD_LOOP
-	prompt "kmod-loop......................... Loop mount support"
-	tristate
-	default m
-	help
-	  Kernel module for loop mount support
-
-config BR2_PACKAGE_KMOD_NBD
-	prompt "kmod-nbd.......................... Network Block Device"
-	tristate
-	default m
-	help
-	  Kernel module for network block device
-
-endmenu
-
-config BR2_PACKAGE_KMOD_CRYPTO
-	prompt "CryptoAPI modules"
-	tristate
-	default m
-	select BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE
-	help
-	  Kernel modules for cryptographic algorithms
-
-menu "Filesystems support"
-
-config BR2_PACKAGE_KMOD_FS_CIFS
-	prompt "kmod-fs-cifs...................... CIFS support"
-	tristate
-	default m
-	help
-	  Kernel modules for CIFS support
-
-config BR2_PACKAGE_KMOD_FS_EXT2
-	prompt "kmod-fs-ext2...................... EXT2 filesystem support"
-	tristate
-	default m
-	help
-	  Kernel modules for EXT2 filesystem support
-
-config BR2_PACKAGE_KMOD_FS_EXT3
-	prompt "kmod-fs-ext3...................... EXT3 filesystem support"
-	tristate
-	default m
-	help
-	  Kernel modules for EXT3 filesystem support
-
-config BR2_PACKAGE_KMOD_FS_HFSPLUS
-	prompt "kmod-fs-hfsplus................... HFS+ filesystem support"
-	tristate
-	default m
-	help
-	  Kernel modules for HFS+ filesystem support
-
-config BR2_PACKAGE_KMOD_FS_NFS
-	prompt "kmod-fs-nfs....................... NFS support"
-	tristate
-	default m
-	help
-	  Kernel modules for NFS support
-	  Includes lockd, nfs and sunrpc
-
-config BR2_PACKAGE_KMOD_FS_VFAT
-	prompt "kmod-fs-vfat...................... VFAT filesystem support"
-	tristate
-	default m
-	help
-	  Kernel modules for VFAT filesystem support
-	  useful for usb mass storage devices
-
-config BR2_PACKAGE_KMOD_FS_XFS
-	prompt "kmod-fs-xfs....................... XFS filesystem support"
-	tristate
-	default m
-	help
-	  Kernel modules for XFS filesystem support
-
-endmenu
-
-menu "Multimedia devices support"
-
-config BR2_PACKAGE_KMOD_PWC
-	prompt "kmod-pwc.......................... Kernel driver for USB Philips Cameras"
-	tristate
-	depends BR2_PACKAGE_KMOD_USB
-	default m
-
-config BR2_PACKAGE_KMOD_SOUNDCORE
-	prompt "kmod-soundcore.................... Soundcard support"
-	tristate
-	default n
-	help
-	  Base support for soundcards
-	  Requires either USB soundcard support (OSS) or ALSA package to be useful
-
-config BR2_PACKAGE_KMOD_VIDEODEV
-	prompt "kmod-videodev..................... Video (For Linux) kernel support"
-	tristate
-	default m
-
-endmenu
-
-menu "Native Language support"
-
-config BR2_PACKAGE_KMOD_NLS_BASE
-	prompt "kmod-nls-base..................... Native Language support"
-	tristate
-	default m
-	help
-	  Kernel native language support
-
-config BR2_PACKAGE_KMOD_NLS_CP437
-	prompt   "kmod-nls-cp437.................. Codepage 437 (United States, Canada)"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_NLS_BASE
-	help
-	  Kernel native language support
-
-config BR2_PACKAGE_KMOD_NLS_CP850
-	prompt   "kmod-nls-cp850.................. Codepage 850 (Europe)"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_NLS_BASE
-	help
-	  Kernel native language support
-
-config BR2_PACKAGE_KMOD_NLS_ISO8859_1
-	prompt   "kmod-nls-iso8859-1.............. NLS ISO 8859-1 (Latin 1; Western European Languages)"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_NLS_BASE
-	help
-	  Kernel native language support
-
-config BR2_PACKAGE_KMOD_NLS_ISO8859_15
-	prompt   "kmod-nls-iso8859-15............. NLS ISO 8859-15 (Latin 15; Western European Languages with Euro)"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_NLS_BASE
-	help
-	  Kernel native language support
-
-config BR2_PACKAGE_KMOD_NLS_UTF8
-	prompt   "kmod-nls-utf8................... NLS UTF8"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_NLS_BASE
-	help
-	  Kernel native language support
-
-endmenu
-
-menu "Network devices support"
-	depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
-
-config BR2_PACKAGE_KMOD_NET_3C59X
-	prompt "kmod-net-3c59x.................... 3Com 3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" Ethernet kernel support"
-	tristate
-	depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
-	default m
-	help
-	  This option enables driver support for a large number of 10mbps and 
-	  10/100mbps EISA, PCI and PCMCIA 3Com network cards:
-	  
-	   * "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
-	   * "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
-	   * "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
-	   * "Tornado"   (3c905)                                  PCI
-	   * "Hurricane" (3c555/3cSOHO)                           PCI
-
-config BR2_PACKAGE_KMOD_NET_8139TOO
-	prompt "kmod-net-8139too.................. RealTek RTL-8139 PCI Fast Ethernet Adapter kernel support"
-	tristate
-	depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
-	default m
-	help
-	  This is a driver for the Fast Ethernet PCI network cards based on 
-	  the RTL8139 chips.
-
-config BR2_PACKAGE_KMOD_NET_AIRO
-	prompt "kmod-net-airo..................... Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards kernel support"
-	tristate
-	depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
-	default m
-	help
-	  This is the standard Linux driver to support Cisco/Aironet ISA and 
-	  PCI 802.11 wireless cards.
-	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X 
-	  - with or without encryption) as well as card before the Cisco 
-	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
-	  
-	  This driver support both the standard Linux Wireless Extensions 
-	  and Cisco proprietary API, so both the Linux Wireless Tools and the 
-	  Cisco Linux utilities can be used to configure the card.
-
-config BR2_PACKAGE_KMOD_NET_E100
-	prompt "kmod-net-e100..................... Intel(R) PRO/100+ cards kernel support"
-	tristate
-	depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
-	default m
-	help
-	  Intel(R) PRO/100+ cards kernel support
-
-config BR2_PACKAGE_KMOD_NET_HERMES
-	prompt "kmod-net-hermes................... Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) kernel support"
-	tristate
-	depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
-	default m
-	help
-	  A driver for 802.11b wireless cards based based on the "Hermes" or 
-	  Intersil HFA384x (Prism 2) MAC controller.  This includes the vast 
-	  majority of the PCMCIA 802.11b cards (which are nearly all rebadges) 
-	  - except for the Cisco/Aironet cards.  Cards supported include the 
-	  Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, 
-	  Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, 
-	  IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear 
-	  MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel 
-	  PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
-
-config BR2_PACKAGE_KMOD_NET_HERMES_PCI
-	prompt   "kmod-net-hermes-pci............. Intersil Prism 2.5 PCI 802.11b adaptor support"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_NET_HERMES
-	help
-	  Enable support for PCI and mini-PCI 802.11b wireless NICs based on 
-	  the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b 
-	  PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also 
-	  common.  Some of the built-in wireless adaptors in laptops are of 
-	  this variety.
-
-config BR2_PACKAGE_KMOD_NET_HERMES_PLX
-	prompt   "kmod-net-hermes-plx............. Hermes in PLX9052 based PCI adaptor (Netgear MA301, etc.) kernel support"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_NET_HERMES
-	help
-	  Enable support for PCMCIA cards supported by the "Hermes" (aka 
-	  orinoco_cs) driver when used in PLX9052 based PCI adaptors.  These 
-	  adaptors are not a full PCMCIA controller but act as a more limited 
-	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that 
-	  802.11b PCMCIA cards can be used in desktop machines.  The Netgear 
-	  MA301 is such an adaptor.
-
-config BR2_PACKAGE_KMOD_NET_NATSEMI
-	prompt "kmod-net-natsemi.................. National Semiconductor DP8381x series PCI Ethernet kernel support"
-	tristate
-	depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
-	default m
-	help
-	  This driver is for the National Semiconductor DP83810 series, 
-	  which is used in cards from PureData, NetGear, Linksys 
-	  and others, including the 83815 chip.
-
-config BR2_PACKAGE_KMOD_NET_PRISM54
-	prompt "kmod-net-prism54.................. Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support"
-	tristate
-	depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM
-	default m
-	help
-	  Enable PCI and Cardbus support for the following chipset based cards: 
-	  
-	   * ISL3880 - Prism GT       802.11 b/g
-	   * ISL3877 - Prism Indigo   802.11 a
-	   * ISL3890 - Prism Duette   802.11 a/b/g
-	  
-	  For a complete list of supported cards visit <http://prism54.org>.
-	  Here is the latest confirmed list of supported cards: 
-	  
-	   * 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
-	   * Allnet ALL0271 PCI Card
-	   * Compex WL54G Cardbus Card
-	   * Corega CG-WLCB54GT Cardbus Card
-	   * D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
-	   * I-O Data WN-G54/CB Cardbus Card
-	   * Kobishi XG-300 aka Z-Com Cardbus Card
-	   * Netgear WG511 Cardbus Card
-	   * Ovislink WL-5400PCI PCI Card
-	   * Peabird WLG-PCI PCI Card
-	   * Sitecom WL-100i Cardbus Card
-	   * Sitecom WL-110i PCI Card
-	   * SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
-	   * SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
-	   * Z-Com XG-900 PCI Card
-	   * Zyxel G-100 Cardbus Card
-	  
-	  If you enable this, you require a firmware file as well.
-	  You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
-	  You can get this non-GPL'd firmware file from the Prism54 project page: 
-	  <http://prism54.org>.
-	  
-	  Note: You need a motherboard with DMA support to use any of these cards.
-
-endmenu
-
-menu "PCMCIA/CardBus support"
-	depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM
-
-config BR2_PACKAGE_KMOD_PCMCIA_CORE
-	prompt "kmod-pcmcia-core.................. PCMCIA/CardBus support"
-	depends BR2_LINUX_PCMCIA_SUPPORT
-	tristate
-	depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM
-	default m
-
-config BR2_PACKAGE_KMOD_PCMCIA_SERIAL
-	prompt   "kmod-pcmcia-serial.............. PCMCIA/CardBus serial device support"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_PCMCIA_CORE
-
-endmenu
-
-menu "USB support"
-
-config BR2_PACKAGE_KMOD_USB
-	prompt "kmod-usb-core..................... USB support"
-	tristate
-	default n if BR2_LINUX_2_4_AR531X
-	default m
-
-config BR2_PACKAGE_KMOD_USB_UHCI 
-	prompt   "kmod-usb-uhci................... Support for UHCI controllers"
-	tristate
-	default n if BR2_LINUX_2_6_AU1000
-	depends BR2_PACKAGE_KMOD_USB
-	select BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB_OHCI
-	prompt   "kmod-usb-ohci................... Support for OHCI controllers"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB
-	select BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB2
-	prompt   "kmod-usb2....................... Support for USB 2.0 controllers"
-	tristate
-	default n if BR2_LINUX_2_6_AU1000
-	depends BR2_PACKAGE_KMOD_USB
-	select BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB_CONTROLLER
-	tristate
-	depends on BR2_PACKAGE_KMOD_USB_UHCI || BR2_PACKAGE_KMOD_USB_OHCI || BR2_PACKAGE_KMOD_USB2
-	default n
-
-config BR2_PACKAGE_KMOD_USB_ACM
-	prompt "kmod-usb-acm...................... Support for USB modems/isdn controllers"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB_AUDIO
-	prompt "kmod-usb-audio.................... Support for USB soundcards"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-	select BR2_PACKAGE_KMOD_SOUNDCORE
-
-config BR2_PACKAGE_KMOD_USB_PRINTER
-	prompt "kmod-usb-printer.................. Support for USB printers"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB_SERIAL
-	prompt "kmod-usb-serial................... Support for USB-to-serial converters"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB_SERIAL_BELKIN
-	prompt   "kmod-usb-serial-belkin.......... Support for Belkin USB-to-serial converters"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB_SERIAL
-
-config BR2_PACKAGE_KMOD_USB_SERIAL_FTDI
-	prompt   "kmod-usb-serial-ftdi............ Support for FTDI USB-to-serial converterr"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB_SERIAL
-
-config BR2_PACKAGE_KMOD_USB_SERIAL_MCT_U232
-	prompt   "kmod-usb-serial-mct-u232........ Support for Magic Control Technology USB-to-Serial converters"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB_SERIAL
-
-config BR2_PACKAGE_KMOD_USB_SERIAL_PL2303
-	prompt   "kmod-usb-serial-pl2303.......... Support for Prolific PL2303 USB-to-Serial converters"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB_SERIAL
-
-config BR2_PACKAGE_KMOD_USB_SERIAL_VISOR
-	prompt   "kmod-usb-serial-visor........... Support for Handspring Visor / Palm m50x / Sony Clie Driver"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB_SERIAL
-
-config BR2_PACKAGE_KMOD_USB_STORAGE
-	prompt "kmod-usb-storage.................. Support for USB storage devices"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB_ATM
-        prompt "kmod-usb-atm...................... Support for USB ATM devices"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB_ATM_SPEEDTOUCH
-        prompt   "kmod-usb-atm-speedtouch......... Support for USB Speedtouch ADSL modem"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_USB_ATM
-
-endmenu
-
-menu "Misc. devices support"
-
-config BR2_PACKAGE_KMOD_AX25
-	prompt "kmod-ax25......................... AX25 support"
-	tristate
-	default m
-	help
-	  Kernel modules for AX25 protocol family
-	  
-	  This package contains both the AX25 layer 2 support (ax25) and AX25 KISS driver (mkiss)
-
-config BR2_PACKAGE_KMOD_BLUETOOTH
-	prompt "kmod-bluetooth.................... Bluetooth drivers and network stack"
-	tristate
-	default m
-	default n if BR2_LINUX_2_4_AR531X
-	help
-	  Bluetooth drivers and network stack
-
-config BR2_PACKAGE_KMOD_LP
-	prompt "kmod-lp........................... Parallel port and lp support"
-	tristate
-	default m
-	help
-	  Kernel modules for line printer and parallel port support
-
-config BR2_PACKAGE_KMOD_SOFTDOG
-	prompt "kmod-softdog...................... Software watchdog"
-	tristate
-	default m
-	help
-	  Kernel modules for software watchdog driver
-
-config BR2_PACKAGE_KMOD_WD1100
-	prompt "kmod-wd1100....................... Soekris net4801 watchdog"
-	tristate
-	default y
-	depends BR2_LINUX_2_4_X86
-	help
-	  Driver for the NatSemi SC1x00 series Watchdog 
-	  found on Soekris net4801 boards
-
-endmenu
-
-menu "Additional kernel modules"
-
-source "target/linux/package/Config.in"
-
-endmenu
-
-endmenu
diff --git a/openwrt/target/linux/Makefile b/openwrt/target/linux/Makefile
deleted file mode 100644
index e82e1052db..0000000000
--- a/openwrt/target/linux/Makefile
+++ /dev/null
@@ -1,97 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_OS:=$(shell uname -s)
-PKG_CPU:=$(shell uname -m)
-
-IB_NAME:=OpenWrt-ImageBuilder-$(PKG_OS)-$(PKG_CPU)
-IB_DIR:=$(BUILD_DIR)/$(IB_NAME)
-
-define kernel_template
-
-$(1)/$(2)-clean:
-	@$(TRACE) target/linux/$(2)-$(1)-clean
-	$(MAKE) -C $(2)-$(1) BOARD="$(2)" clean
-
-$(1)/$(2)-prepare:
-	@$(TRACE) target/linux/$(2)-$(1)-prepare
-	$(MAKE) -C $(2)-$(1) BOARD="$(2)" prepare
-
-$(1)/$(2)-compile:
-	@$(TRACE) target/linux/$(2)-$(1)-compile
-	$(MAKE) -C $(2)-$(1) BOARD="$(2)" compile
-
-$(1)/$(2)-rebuild:
-	@$(TRACE) target/linux/$(2)-$(1)-rebuild
-	$(MAKE) -C $(2)-$(1) BOARD="$(2)" rebuild
-
-$(1)/$(2)-install:
-	@$(TRACE) target/linux/$(2)-$(1)-install
-	$(MAKE) -C $(2)-$(1) BOARD="$(2)" install
-
-$(1)/$(2)-image: $(1)/$(2)-install
-	@$(TRACE) target/linux/image-install
-	$(MAKE) -C image KERNEL="$(1)" BOARD="$(2)" install
-
-$(1)/$(2)-install-ib:
-	@$(TRACE) target/linux/image-install-ib
-	$(MAKE) -C image KERNEL="$(1)" BOARD="$(2)" IB_DIR="$(IB_DIR)" install-ib
-	echo '$$$$(eval $$$$(call image_template,$(2),$(1)))' >> $(IB_DIR)/kernel.mk
-
-
-ifeq ($(BR2_LINUX_$(3)),y)
-clean: $(1)/$(2)-clean
-prepare: $(1)/$(2)-prepare
-compile: $(1)/$(2)-compile
-rebuild: $(1)/$(2)-rebuild
-$(BIN_DIR)/$(IB_NAME).tar.bz2 install: $(1)/$(2)-image
-install-ib: $(1)/$(2)-install-ib
-package/%:
-	$(MAKE) -C $(2)-$(1) BOARD="$(2)" $$@
-endif
-
-.PHONY: $(1)/$(2)-clean $(1)/$(2)-prepare $(1)/$(2)-compile $(1)/$(2)-rebuild $(1)/$(2)-install $(1)/$(2)-image $(1)/$(2)-install-ib
-endef
-
-.PHONY: clean prepare compile rebuild install imagebuilder install-ib
-
-install-ib:
-
-$(BIN_DIR)/$(IB_NAME).tar.bz2:	
-	rm -rf $(IB_DIR)
-	mkdir -p $(IB_DIR)/packages
-	mkdir -p $(IB_DIR)/scripts
-	$(CP) ./imagebuilder/* $(IB_DIR)/
-	$(CP) $(TOPDIR)/bin/packages/*.ipk $(IB_DIR)/packages/
-	$(CP) $(TOPDIR)/scripts/ipkg $(IB_DIR)/scripts/
-	$(MAKE) install-ib
-	$(CP) $(TOPDIR)/rules.mk $(IB_DIR)
-	$(CP) ./image $(IB_DIR)/
-	$(CP) $(TOPDIR)/.config $(IB_DIR)/
-	find $(IB_DIR) -name .svn | xargs rm -rf
-	find $(IB_DIR) -name CVS | xargs rm -rf
-	(cd $(BUILD_DIR); tar c $(IB_NAME) | bzip2 -c > $(BIN_DIR)/$(IB_NAME).tar.bz2)
-
-ifeq ($(BR2_PACKAGE_IMAGEBUILDER),y)
-install: $(BIN_DIR)/$(IB_NAME).tar.bz2
-endif
-
-prepare:
-	@$(TRACE) target/linux/image-prepare
-	$(MAKE) -C image prepare
-compile:
-	@$(TRACE) target/linux/image-compile
-	$(MAKE) -C image compile
-install:
-rebuild:
-clean:
-
-$(eval $(call kernel_template,2.4,brcm,2_4_BRCM))
-$(eval $(call kernel_template,2.4,ar7,2_4_AR7))
-$(eval $(call kernel_template,2.4,x86,2_4_X86))
-$(eval $(call kernel_template,2.6,brcm,2_6_BRCM))
-$(eval $(call kernel_template,2.6,x86,2_6_X86))
-$(eval $(call kernel_template,2.4,ar531x,2_4_AR531X))
-$(eval $(call kernel_template,2.6,aruba,2_6_ARUBA))
-$(eval $(call kernel_template,2.6,au1000,2_6_AU1000))
-$(eval $(call kernel_template,2.6,xscale,2_6_XSCALE))
-$(eval $(call kernel_template,2.6,sibyte,2_6_SIBYTE))
diff --git a/openwrt/target/linux/ar531x-2.4/Makefile b/openwrt/target/linux/ar531x-2.4/Makefile
deleted file mode 100644
index 6e6551b193..0000000000
--- a/openwrt/target/linux/ar531x-2.4/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-LINUX_VERSION:=2.4.32
-LINUX_RELEASE:=1
-LINUX_KERNEL_MD5SUM:=38f4d0830e95a20f4bfed17622d5557c
-
-include ../rules.mk
-include ./config
-include ../generic-$(KERNEL)/modules.mk
-include ../kernel.mk
-
-$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
-	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
-	@$(CP) config $(LINUX_DIR)/.config
-	touch $@
-
diff --git a/openwrt/target/linux/ar531x-2.4/config b/openwrt/target/linux/ar531x-2.4/config
deleted file mode 100644
index 782d1de4c7..0000000000
--- a/openwrt/target/linux/ar531x-2.4/config
+++ /dev/null
@@ -1,1164 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MIPS=y
-CONFIG_MIPS32=y
-# CONFIG_MIPS64 is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Machine selection
-#
-# CONFIG_ACER_PICA_61 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_FICMMP is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
-CONFIG_AR531X=y
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_COGENT_CSB250 is not set
-# CONFIG_BAGET_MIPS is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_HP_LASERJET is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MAGNUM_4000 is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_BIG_SUR is not set
-# CONFIG_PMC_STRETCH is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
-# CONFIG_NEC_EAGLE is not set
-# CONFIG_OLIVETTI_M700 is not set
-# CONFIG_NINO is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_IRQ_CPU=y
-CONFIG_CPU_R4X00=y
-CONFIG_SERIAL=y
-CONFIG_NEW_IRQ=y
-CONFIG_NEW_TIME_C=y
-CONFIG_NONCOHERENT_IO=y
-CONFIG_EARLY_PRINTK_HACK=y
-# CONFIG_SCSI is not set
-
-#
-# Board selection
-#
-# CONFIG_APUNKNOWN is not set
-CONFIG_AP30=y
-# CONFIG_AP31 is not set
-# CONFIG_AP33 is not set
-# CONFIG_AP38 is not set
-# CONFIG_AP43 is not set
-# CONFIG_AP48 is not set
-# CONFIG_AP51 is not set
-# CONFIG_AP30ASK is not set
-CONFIG_MTD_PHYSMAP_BUSWIDTH=2
-
-#
-# Flash Selection
-#
-CONFIG_FLASH_2MB=y
-# CONFIG_FLASH_4MB is not set
-# CONFIG_MIPS_AU1000 is not set
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-CONFIG_CPU_R4X00=y
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_ADVANCED=y
-# CONFIG_CPU_HAS_LLSC is not set
-# CONFIG_CPU_HAS_LLDSCD is not set
-# CONFIG_CPU_HAS_WB is not set
-CONFIG_CPU_HAS_SYNC=y
-
-#
-# General setup
-#
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_BUILD_ELF64 is not set
-# CONFIG_BINFMT_IRIX is not set
-CONFIG_NET=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_NEW is not set
-CONFIG_PCI_AUTO=y
-# CONFIG_ISA is not set
-# CONFIG_TC is not set
-# CONFIG_MCA is not set
-# CONFIG_SBUS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_PCMCIA is not set
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_ELF_AOUT is not set
-# CONFIG_MIPS32_COMPAT is not set
-# CONFIG_MIPS32_O32 is not set
-# CONFIG_MIPS32_N32 is not set
-# CONFIG_BINFMT_ELF32 is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_OOM_KILLER is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_REDBOOT_PARTS=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_B1 is not set
-CONFIG_MTD_CFI_B2=y
-# CONFIG_MTD_CFI_B4 is not set
-# CONFIG_MTD_CFI_B8 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_SSTSTD=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_OBSOLETE_CHIPS=y
-CONFIG_MTD_AMDSTD=y
-# CONFIG_MTD_SHARP is not set
-CONFIG_MTD_JEDEC=y
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xbe000000
-CONFIG_MTD_PHYSMAP_LEN=200000
-CONFIG_MTD_PHYSMAP_BUSWIDTH=2
-# CONFIG_MTD_PB1000 is not set
-# CONFIG_MTD_PB1500 is not set
-# CONFIG_MTD_PB1100 is not set
-# CONFIG_MTD_BOSPORUS is not set
-# CONFIG_MTD_XXS1500 is not set
-# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
-# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
-# CONFIG_MTD_MIRAGE is not set
-# CONFIG_MTD_CSTM_MIPS_IXX is not set
-# CONFIG_MTD_OCELOT is not set
-# CONFIG_MTD_LASAT is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC1000 is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOCPROBE is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-# CONFIG_PARPORT_AMIGA is not set
-# CONFIG_PARPORT_MFC3 is not set
-# CONFIG_PARPORT_ATARI is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_SUNBPP is not set
-# CONFIG_PARPORT_IP22 is not set
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_CISS_MONITOR_THREAD is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=3072
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_STATS is not set
-
-#
-# MIPS initrd options
-#
-# CONFIG_EMBEDDED_RAMDISK is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_FILTER=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_NAT=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_TOS=y
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-
-#
-#   IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_IRC=y
-CONFIG_IP_NF_CT_ACCT=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_CT_PROTO_GRE=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-CONFIG_IP_NF_RTSP=m
-CONFIG_IP_NF_MMS=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_QUOTA=m
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_CONDITION=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_UNCLEAN=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_MIRROR=m
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_PROTO_GRE=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_H323=m
-CONFIG_IP_NF_NAT_RTSP=m
-CONFIG_IP_NF_NAT_MMS=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_IMQ=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-#   IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-
-#
-#   IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_CONDITION=m
-CONFIG_IP6_NF_MATCH_MAC=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_TARGET_IMQ=m
-# CONFIG_KHTTPD is not set
-
-#
-#    SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_VLAN_8021Q=y
-
-#
-#  
-#
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-CONFIG_BRIDGE=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_CSZ=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_IPSEC_NAT_TRAVERSAL=y
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-# CONFIG_PHONE_IXJ_PCMCIA is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=m
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_IDEDISK_STROKE=y
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_DMA_NONPCI is not set
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
-# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-# CONFIG_BLK_DEV_ATARAID_SII is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_BOOT is not set
-# CONFIG_FUSION_ISENSE is not set
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LAN is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-CONFIG_TUN=m
-CONFIG_NET_RANDOM=y
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_VENETDEV is not set
-# CONFIG_NET_ATHEROS_ETHER is not set
-CONFIG_MARVELL_ENET_PHY=y
-# CONFIG_SUNLANCE is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE_MPPC=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_STRIP is not set
-# CONFIG_WAVELAN is not set
-# CONFIG_ARLAN is not set
-# CONFIG_AIRONET4500 is not set
-# CONFIG_AIRONET4500_NONCS is not set
-# CONFIG_AIRONET4500_PROC is not set
-# CONFIG_HERMES is not set
-
-#
-# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_NET_WIRELESS is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-CONFIG_SHAPER=m
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_NETROM is not set
-# CONFIG_ROSE is not set
-
-#
-# AX.25 network device drivers
-#
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-# CONFIG_6PACK is not set
-# CONFIG_BPQETHER is not set
-# CONFIG_SCC_DELAY is not set
-# CONFIG_SCC_TRXECHO is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_SOUNDMODEM is not set
-# CONFIG_YAM is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=128
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-CONFIG_PPDEV=m
-# CONFIG_TIPAR is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPMI_PANIC_EVENT is not set
-# CONFIG_IPMI_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_KCS is not set
-# CONFIG_IPMI_WATCHDOG is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_WAFER_WDT is not set
-# CONFIG_I810_TCO is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_60XX_WDT is not set
-# CONFIG_SC1200_WDT is not set
-# CONFIG_SCx200_WDT is not set
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_W83877F_WDT is not set
-# CONFIG_WDT is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_SCx200 is not set
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-
-#
-# Direct Rendering Manager (XFree86 DRI support)
-#
-# CONFIG_DRM is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_QFMT_V2 is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-CONFIG_EXT3_FS=m
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-CONFIG_VFAT_FS=m
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_BBC_ARMLIB is not set
-# CONFIG_JFFS2_BBC_LZO is not set
-CONFIG_JFFS2_BBC_LZARI=y
-# CONFIG_JFFS2_BBC_LZHD is not set
-# CONFIG_JFFS2_BBC_LZSS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=m
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_TRACE is not set
-# CONFIG_XFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_SUNRPC=m
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SMB_NLS is not set
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-CONFIG_VIDEO_PROC_FS=y
-# CONFIG_I2C_PARPORT is not set
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_ZORAN_BUZ is not set
-# CONFIG_VIDEO_ZORAN_DC10 is not set
-# CONFIG_VIDEO_ZORAN_LML33 is not set
-# CONFIG_VIDEO_ZR36120 is not set
-# CONFIG_VIDEO_MEYE is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_MIROPCM20 is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_MIDI_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_MIDI_VIA82CXXX is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-# CONFIG_SOUND_WM97XX is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# Support for USB gadgets
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-CONFIG_BLUEZ=m
-CONFIG_BLUEZ_L2CAP=m
-CONFIG_BLUEZ_SCO=m
-CONFIG_BLUEZ_RFCOMM=m
-CONFIG_BLUEZ_RFCOMM_TTY=y
-CONFIG_BLUEZ_BNEP=m
-CONFIG_BLUEZ_BNEP_MC_FILTER=y
-CONFIG_BLUEZ_BNEP_PROTO_FILTER=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BLUEZ_HCIUSB is not set
-CONFIG_BLUEZ_HCIUART=m
-CONFIG_BLUEZ_HCIUART_H4=y
-CONFIG_BLUEZ_HCIUART_BCSP=y
-CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y
-# CONFIG_BLUEZ_HCIBFUSB is not set
-# CONFIG_BLUEZ_HCIDTL1 is not set
-# CONFIG_BLUEZ_HCIBT3C is not set
-# CONFIG_BLUEZ_HCIBLUECARD is not set
-# CONFIG_BLUEZ_HCIBTUART is not set
-# CONFIG_BLUEZ_HCIVHCI is not set
-
-#
-# Kernel hacking
-#
-CONFIG_CROSSCOMPILE=y
-# CONFIG_RUNTIME_DEBUG is not set
-# CONFIG_KGDB is not set
-# CONFIG_GDB_CONSOLE is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_MIPS_UNCACHED is not set
-CONFIG_LOG_BUF_SHIFT=0
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/openwrt/target/linux/ar531x-2.4/patches/000-atheros-support.patch b/openwrt/target/linux/ar531x-2.4/patches/000-atheros-support.patch
deleted file mode 100644
index de7115b46a..0000000000
--- a/openwrt/target/linux/ar531x-2.4/patches/000-atheros-support.patch
+++ /dev/null
@@ -1,11411 +0,0 @@
-diff -urN linux-mips/arch/mips/ar531x/ar531xdbg_io.c mips-linux-2.4.25/arch/mips/ar531x/ar531xdbg_io.c
---- linux-mips/arch/mips/ar531x/ar531xdbg_io.c	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/ar531xdbg_io.c	2005-12-30 17:26:30.606883840 +0000
-@@ -0,0 +1,234 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright MontaVista Software Inc
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * Basic support for polled character input/output
-+ * using the AR531X's serial port.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/serial.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+
-+#include <asm/reboot.h>
-+#include <asm/io.h>
-+#include <asm/time.h>
-+#include <asm/pgtable.h>
-+#include <asm/processor.h>
-+#include <asm/reboot.h>
-+#include <asm/system.h>
-+#include <asm/serial.h>
-+#include <asm/gdb-stub.h>
-+
-+#include "ar531xlnx.h"
-+
-+#if CONFIG_EARLY_PRINTK_HACK || CONFIG_KGDB
-+/* base addr of uart and clock timing */
-+#if CONFIG_AR5315
-+#define         BASE                    AR5315_UART0 
-+#else
-+#define         BASE                    AR531X_UART0
-+#endif
-+
-+/* distance in bytes between two serial registers */
-+#define         REG_OFFSET              4
-+
-+/*
-+ * 0 - we need to do serial init
-+ * 1 - skip serial init
-+ */
-+static int serialPortInitialized = 0;
-+
-+/*
-+ *  * the default baud rate *if* we do serial init
-+ *   */
-+#define         BAUD_DEFAULT            UART16550_BAUD_9600
-+
-+/* === END OF CONFIG === */
-+
-+#define         UART16550_BAUD_2400             2400
-+#define         UART16550_BAUD_4800             4800
-+#define         UART16550_BAUD_9600             9600
-+#define         UART16550_BAUD_19200            19200
-+#define         UART16550_BAUD_38400            38400
-+#define         UART16550_BAUD_57600            57600
-+#define         UART16550_BAUD_115200           115200
-+
-+#define         UART16550_PARITY_NONE           0
-+#define         UART16550_PARITY_ODD            0x08
-+#define         UART16550_PARITY_EVEN           0x18
-+#define         UART16550_PARITY_MARK           0x28
-+#define         UART16550_PARITY_SPACE          0x38
-+
-+#define         UART16550_DATA_5BIT             0x0
-+#define         UART16550_DATA_6BIT             0x1
-+#define         UART16550_DATA_7BIT             0x2
-+#define         UART16550_DATA_8BIT             0x3
-+
-+#define         UART16550_STOP_1BIT             0x0
-+#define         UART16550_STOP_2BIT             0x4
-+
-+/* register offset */
-+#define         OFS_RCV_BUFFER          (0*REG_OFFSET)
-+#define         OFS_TRANS_HOLD          (0*REG_OFFSET)
-+#define         OFS_SEND_BUFFER         (0*REG_OFFSET)
-+#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-+#define         OFS_INTR_ID             (2*REG_OFFSET)
-+#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-+#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-+#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-+#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-+#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-+#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-+#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-+#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-+
-+#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-+#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-+
-+
-+/* memory-mapped read/write of the port */
-+#define         UART16550_READ(y)    (*((volatile u8*)(BASE + y)))
-+#define         UART16550_WRITE(y, z)  ((*((volatile u8*)(BASE + y))) = z)
-+
-+void
-+debugPortInit(u32 baud, u8 data, u8 parity, u8 stop)
-+{
-+	/* Pull UART out of reset */
-+#if CONFIG_AR5315
-+	sysRegWrite(AR5315_RESET,
-+		sysRegRead(AR5315_RESET) & ~(RESET_UART0));
-+#else
-+	sysRegWrite(AR531X_RESET,
-+		sysRegRead(AR531X_RESET) & ~(AR531X_RESET_UART0));
-+#endif
-+
-+	/* disable interrupts */
-+        UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-+	UART16550_WRITE(OFS_INTR_ENABLE, 0);
-+
-+	/* set up buad rate */
-+	{ 
-+		u32 divisor;
-+#if CONFIG_AR5315 
-+		u32 uart_clock_rate = ar531x_apb_frequency();
-+#else
-+		u32 uart_clock_rate = ar531x_cpu_frequency() / 4;
-+#endif
-+		u32 base_baud = uart_clock_rate / 16;
-+       
-+		/* set DIAB bit */
-+	        UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-+        
-+	        /* set divisor */
-+	        divisor = base_baud / baud;
-+        	UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-+	        UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00)>>8);
-+
-+        	/* clear DIAB bit */
-+	        UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-+	}
-+
-+	/* set data format */
-+	UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-+}
-+
-+u8
-+getDebugChar(void)
-+{
-+        if (!serialPortInitialized) {
-+                serialPortInitialized = 1;
-+                debugPortInit(BAUD_DEFAULT,
-+                              UART16550_DATA_8BIT,
-+                              UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-+        }
-+
-+	while((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
-+	return UART16550_READ(OFS_RCV_BUFFER);
-+}
-+
-+#if CONFIG_KGDB
-+/*
-+ * Peek at the most recently received character.
-+ * Don't wait for a new character to be received.
-+ */
-+u8
-+peekDebugChar(void)
-+{
-+	return UART16550_READ(OFS_RCV_BUFFER);
-+}
-+
-+static int kgdbInitialized = 0;
-+
-+void
-+kgdbInit(void)
-+{
-+#if CONFIG_AR5315
-+    sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION);
-+#else
-+    sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
-+#endif
-+
-+    if (!kgdbInitialized) {
-+        printk("Setting debug traps - please connect the remote debugger.\n");
-+        set_debug_traps();
-+        kgdbInitialized = 1;
-+    }
-+    breakpoint();
-+}
-+
-+int
-+kgdbEnabled(void)
-+{
-+    return kgdbInitialized;
-+}
-+
-+#define DEBUG_CHAR '\001';
-+
-+int
-+kgdbInterrupt(void)
-+{
-+    if (!kgdbInitialized) {
-+        return 0;
-+    }
-+
-+    /* 
-+     * Try to avoid swallowing too much input: Only consume
-+     * a character if nothing new has arrived.  Yes, there's
-+     * still a small hole here, and we may lose an input
-+     * character now and then.
-+     */
-+    if (UART16550_READ(OFS_LINE_STATUS) & 1) {
-+        return 0;
-+    } else {
-+        return UART16550_READ(OFS_RCV_BUFFER) == DEBUG_CHAR;
-+    }
-+}
-+#endif
-+
-+
-+void
-+putDebugChar(char byte)
-+{
-+        if (!serialPortInitialized) {
-+                serialPortInitialized = 1;
-+                debugPortInit(BAUD_DEFAULT,
-+                              UART16550_DATA_8BIT,
-+                              UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-+        }
-+
-+	while ((UART16550_READ(OFS_LINE_STATUS) &0x20) == 0);
-+	UART16550_WRITE(OFS_SEND_BUFFER, byte);
-+ }
-+#endif /* CONFIG_EARLY_PRINTK_HACK || CONFIG_KGDB */
-diff -urN linux-mips/arch/mips/ar531x/ar531xgpio.c mips-linux-2.4.25/arch/mips/ar531x/ar531xgpio.c
---- linux-mips/arch/mips/ar531x/ar531xgpio.c	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/ar531xgpio.c	2005-12-30 17:26:30.606883840 +0000
-@@ -0,0 +1,147 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * Support for GPIO -- General Purpose Input/Output Pins
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/signal.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+
-+#include "ar531xlnx.h"
-+
-+/* GPIO Interrupt Support */
-+
-+/* Turn on the specified AR531X_GPIO_IRQ interrupt */
-+static unsigned int
-+ar531x_gpio_intr_startup(unsigned int irq)
-+{
-+	ar531x_gpio_intr_enable(irq);
-+	return 0;
-+}
-+
-+/* Turn off the specified AR531X_GPIO_IRQ interrupt */
-+static void
-+ar531x_gpio_intr_shutdown(unsigned int irq)
-+{
-+	ar531x_gpio_intr_disable(irq);
-+}
-+
-+u32 gpioIntMask = 0;
-+
-+/* Enable the specified AR531X_GPIO_IRQ interrupt */
-+void
-+ar531x_gpio_intr_enable(unsigned int irq)
-+{
-+    u32 reg;
-+    int gpio;
-+
-+#ifndef CONFIG_AR5315
-+    gpio = irq - AR531X_GPIO_IRQ_BASE;
-+    gpioIntMask |= gpio;
-+
-+    reg = sysRegRead(AR531X_GPIO_CR);
-+    reg &= ~(GPIO_CR_M(gpio) | GPIO_CR_UART(gpio) | GPIO_CR_INT(gpio));
-+    reg |= GPIO_CR_I(gpio);
-+    reg |= GPIO_CR_INT(gpio);
-+
-+    sysRegWrite(AR531X_GPIO_CR, reg);
-+    (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */
-+#endif
-+}
-+
-+/* Disable the specified AR531X_GPIO_IRQ interrupt */
-+void
-+ar531x_gpio_intr_disable(unsigned int irq)
-+{
-+    u32 reg;
-+    int gpio;
-+
-+#ifndef CONFIG_AR5315
-+    gpio = irq - AR531X_GPIO_IRQ_BASE;
-+    reg = sysRegRead(AR531X_GPIO_CR);
-+    reg &= ~(GPIO_CR_M(gpio) | GPIO_CR_UART(gpio) | GPIO_CR_INT(gpio));
-+    reg |= GPIO_CR_I(gpio);
-+    /* No GPIO_CR_INT bit */
-+
-+    sysRegWrite(AR531X_GPIO_CR, reg);
-+    (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */
-+
-+    gpioIntMask &= ~gpio;
-+#endif
-+}
-+
-+static void
-+ar531x_gpio_intr_ack(unsigned int irq)
-+{
-+	ar531x_gpio_intr_disable(irq);
-+}
-+
-+static void
-+ar531x_gpio_intr_end(unsigned int irq)
-+{
-+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+		ar531x_gpio_intr_enable(irq);
-+}
-+
-+static void
-+ar531x_gpio_intr_set_affinity(unsigned int irq, unsigned long mask)
-+{
-+	/* Only 1 CPU; ignore affinity request */
-+}
-+
-+int ar531x_gpio_irq_base;
-+
-+struct hw_interrupt_type ar531x_gpio_intr_controller = {
-+	"AR531X GPIO",
-+	ar531x_gpio_intr_startup,
-+	ar531x_gpio_intr_shutdown,
-+	ar531x_gpio_intr_enable,
-+	ar531x_gpio_intr_disable,
-+	ar531x_gpio_intr_ack,
-+	ar531x_gpio_intr_end,
-+	ar531x_gpio_intr_set_affinity,
-+};
-+
-+void
-+ar531x_gpio_intr_init(int irq_base)
-+{
-+	int i;
-+
-+	for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) {
-+		irq_desc[i].status = IRQ_DISABLED;
-+		irq_desc[i].action = NULL;
-+		irq_desc[i].depth = 1;
-+		irq_desc[i].handler = &ar531x_gpio_intr_controller;
-+	}
-+
-+	ar531x_gpio_irq_base = irq_base;
-+}
-+
-+/* ARGSUSED */
-+void
-+spurious_gpio_handler(int cpl, void *dev_id, struct pt_regs *regs)
-+{
-+    u32 gpioDataIn;
-+#if CONFIG_AR5315
-+    gpioDataIn = sysRegRead(AR5315_GPIO_DI) & gpioIntMask;
-+#else
-+    gpioDataIn = sysRegRead(AR531X_GPIO_DI) & gpioIntMask;
-+#endif
-+
-+    printk("spurious_gpio_handler: 0x%x di=0x%8.8x gpioIntMask=0x%8.8x\n",
-+           cpl, gpioDataIn, gpioIntMask);
-+}
-+
-+struct irqaction spurious_gpio =
-+	{spurious_gpio_handler, SA_INTERRUPT, 0, "spurious_gpio",
-+            NULL, NULL};
-+
-diff -urN linux-mips/arch/mips/ar531x/ar531x.h mips-linux-2.4.25/arch/mips/ar531x/ar531x.h
---- linux-mips/arch/mips/ar531x/ar531x.h	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/ar531x.h	2005-12-30 17:26:30.605883992 +0000
-@@ -0,0 +1,1018 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+#ifndef AR531X_H
-+#define AR531X_H 1
-+
-+#ifndef CONFIG_AR5315
-+
-+#include <asm/addrspace.h>
-+
-+/* Address Map */
-+#define AR531X_WLAN0            0x18000000
-+#define AR531X_WLAN1            0x18500000
-+#define AR531X_ENET0            0x18100000
-+#define AR531X_ENET1            0x18200000
-+#define AR531X_SDRAMCTL         0x18300000
-+#define AR531X_FLASHCTL         0x18400000
-+#define AR531X_APBBASE		0x1c000000
-+#define AR531X_FLASH            0x1e000000
-+#define AR531X_UART0            0xbc000003      /* UART MMR */
-+
-+/*
-+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
-+ * should be considered available.  The AR5312 supports 2 enet MACS,
-+ * even though many reference boards only actually use 1 of them
-+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
-+ * The AR2312 supports 1 enet MAC.
-+ */
-+#define AR531X_NUM_ENET_MAC             2
-+
-+/*
-+ * Need these defines to determine true number of ethernet MACs
-+ */
-+#define AR5212_AR5312_REV2      0x0052          /* AR5312 WMAC (AP31) */
-+#define AR5212_AR5312_REV7      0x0057          /* AR5312 WMAC (AP30-040) */
-+#define AR5212_AR2313_REV8      0x0058          /* AR2313 WMAC (AP43-030) */
-+#define AR531X_RADIO_MASK_OFF  0xc8
-+#define AR531X_RADIO0_MASK     0x0003
-+#define AR531X_RADIO1_MASK     0x000c
-+#define AR531X_RADIO1_S        2 
-+
-+/*
-+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
-+ * should be considered available.
-+ */
-+#define AR531X_NUM_WMAC                 2
-+
-+/* Reset/Timer Block Address Map */
-+#define AR531X_RESETTMR		(AR531X_APBBASE  + 0x3000)
-+#define AR531X_TIMER		(AR531X_RESETTMR + 0x0000) /* countdown timer */
-+#define AR531X_WD_CTRL          (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
-+#define AR531X_WD_TIMER         (AR531X_RESETTMR + 0x000c) /* watchdog timer */
-+#define AR531X_ISR		(AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
-+#define AR531X_IMR		(AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
-+#define AR531X_RESET		(AR531X_RESETTMR + 0x0020)
-+#define AR5312_CLOCKCTL1	(AR531X_RESETTMR + 0x0064)
-+#define AR5312_SCRATCH   	(AR531X_RESETTMR + 0x006c)
-+#define AR531X_PROCADDR		(AR531X_RESETTMR + 0x0070)
-+#define AR531X_PROC1		(AR531X_RESETTMR + 0x0074)
-+#define AR531X_DMAADDR		(AR531X_RESETTMR + 0x0078)
-+#define AR531X_DMA1		(AR531X_RESETTMR + 0x007c)
-+#define AR531X_ENABLE           (AR531X_RESETTMR + 0x0080) /* interface enb */
-+#define AR531X_REV		(AR531X_RESETTMR + 0x0090) /* revision */
-+
-+/* AR531X_WD_CTRL register bit field definitions */
-+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
-+#define AR531X_WD_CTRL_NMI               0x0001
-+#define AR531X_WD_CTRL_RESET             0x0002
-+
-+/* AR531X_ISR register bit field definitions */
-+#define AR531X_ISR_NONE		0x0000
-+#define AR531X_ISR_TIMER	0x0001
-+#define AR531X_ISR_AHBPROC	0x0002
-+#define AR531X_ISR_AHBDMA	0x0004
-+#define AR531X_ISR_GPIO		0x0008
-+#define AR531X_ISR_UART0	0x0010
-+#define AR531X_ISR_UART0DMA	0x0020
-+#define AR531X_ISR_WD		0x0040
-+#define AR531X_ISR_LOCAL	0x0080
-+
-+/* AR531X_RESET register bit field definitions */
-+#define AR531X_RESET_SYSTEM     0x00000001  /* cold reset full system */
-+#define AR531X_RESET_PROC       0x00000002  /* cold reset MIPS core */
-+#define AR531X_RESET_WLAN0      0x00000004  /* cold reset WLAN MAC and BB */
-+#define AR531X_RESET_EPHY0      0x00000008  /* cold reset ENET0 phy */
-+#define AR531X_RESET_EPHY1      0x00000010  /* cold reset ENET1 phy */
-+#define AR531X_RESET_ENET0      0x00000020  /* cold reset ENET0 mac */
-+#define AR531X_RESET_ENET1      0x00000040  /* cold reset ENET1 mac */
-+#define AR531X_RESET_UART0      0x00000100  /* cold reset UART0 (high speed) */
-+#define AR531X_RESET_WLAN1      0x00000200  /* cold reset WLAN MAC/BB */
-+#define AR531X_RESET_APB        0x00000400  /* cold reset APB (ar5312) */
-+#define AR531X_RESET_WARM_PROC  0x00001000  /* warm reset MIPS core */
-+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000  /* warm reset WLAN0 MAC */
-+#define AR531X_RESET_WARM_WLAN0_BB  0x00004000  /* warm reset WLAN0 BaseBand */
-+#define AR531X_RESET_NMI        0x00010000  /* send an NMI to the processor */
-+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000  /* warm reset WLAN1 mac */
-+#define AR531X_RESET_WARM_WLAN1_BB  0x00040000  /* warm reset WLAN1 baseband */
-+#define AR531X_RESET_LOCAL_BUS  0x00080000  /* reset local bus */
-+#define AR531X_RESET_WDOG       0x00100000  /* last reset was a watchdog */
-+
-+#define AR531X_RESET_WMAC0_BITS \
-+        AR531X_RESET_WLAN0 |\
-+        AR531X_RESET_WARM_WLAN0_MAC |\
-+        AR531X_RESET_WARM_WLAN0_BB
-+
-+#define AR531X_RESERT_WMAC1_BITS \
-+        AR531X_RESET_WLAN1 |\
-+        AR531X_RESET_WARM_WLAN1_MAC |\
-+        AR531X_RESET_WARM_WLAN1_BB
-+
-+/* AR5312_CLOCKCTL1 register bit field definitions */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK    0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT            4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK   0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT           8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK      0x00010000
-+
-+/* Valid for AR5312 and AR2312 */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK    0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT            4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK   0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT           8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK      0x00010000
-+
-+/* Valid for AR2313 */
-+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK    0x00003000
-+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT           12
-+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK   0x001f0000
-+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT          16
-+#define AR2313_CLOCKCTL1_DOUBLER_MASK      0x00000000
-+
-+
-+/* AR531X_ENABLE register bit field definitions */
-+#define AR531X_ENABLE_WLAN0              0x0001
-+#define AR531X_ENABLE_ENET0              0x0002
-+#define AR531X_ENABLE_ENET1              0x0004
-+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008   /* UART, and WLAN1 PIOs */
-+#define AR531X_ENABLE_WLAN1_DMA          0x0010   /* WLAN1 DMAs */
-+#define AR531X_ENABLE_WLAN1 \
-+            (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
-+
-+/* AR531X_REV register bit field definitions */
-+#define AR531X_REV_WMAC_MAJ    0xf000
-+#define AR531X_REV_WMAC_MAJ_S  12
-+#define AR531X_REV_WMAC_MIN    0x0f00
-+#define AR531X_REV_WMAC_MIN_S  8
-+#define AR531X_REV_MAJ         0x00f0
-+#define AR531X_REV_MAJ_S       4
-+#define AR531X_REV_MIN         0x000f
-+#define AR531X_REV_MIN_S       0
-+#define AR531X_REV_CHIP        (REV_MAJ|REV_MIN)
-+
-+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define AR531X_REV_MAJ_AR5312          0x4
-+#define AR531X_REV_MAJ_AR2313          0x5
-+
-+/* Minor revision numbers, bits 3..0 of Revision ID register */
-+#define AR5312_REV_MIN_DUAL     0x0     /* Dual WLAN version */
-+#define AR5312_REV_MIN_SINGLE   0x1     /* Single WLAN version */
-+
-+/* AR531X_FLASHCTL register bit field definitions */
-+#define FLASHCTL_IDCY   0x0000000f      /* Idle cycle turn around time */
-+#define FLASHCTL_IDCY_S 0
-+#define FLASHCTL_WST1   0x000003e0      /* Wait state 1 */
-+#define FLASHCTL_WST1_S 5
-+#define FLASHCTL_RBLE   0x00000400      /* Read byte lane enable */
-+#define FLASHCTL_WST2   0x0000f800      /* Wait state 2 */
-+#define FLASHCTL_WST2_S 11
-+#define FLASHCTL_AC     0x00070000      /* Flash address check (added) */
-+#define FLASHCTL_AC_S   16
-+#define FLASHCTL_AC_128K 0x00000000
-+#define FLASHCTL_AC_256K 0x00010000
-+#define FLASHCTL_AC_512K 0x00020000
-+#define FLASHCTL_AC_1M   0x00030000
-+#define FLASHCTL_AC_2M   0x00040000
-+#define FLASHCTL_AC_4M   0x00050000
-+#define FLASHCTL_AC_8M   0x00060000
-+#define FLASHCTL_AC_RES  0x00070000     /* 16MB is not supported */
-+#define FLASHCTL_E      0x00080000      /* Flash bank enable (added) */
-+#define FLASHCTL_BUSERR 0x01000000      /* Bus transfer error status flag */
-+#define FLASHCTL_WPERR  0x02000000      /* Write protect error status flag */
-+#define FLASHCTL_WP     0x04000000      /* Write protect */
-+#define FLASHCTL_BM     0x08000000      /* Burst mode */
-+#define FLASHCTL_MW     0x30000000      /* Memory width */
-+#define FLASHCTL_MWx8   0x00000000      /* Memory width x8 */
-+#define FLASHCTL_MWx16  0x10000000      /* Memory width x16 */
-+#define FLASHCTL_MWx32  0x20000000      /* Memory width x32 (not supported) */
-+#define FLASHCTL_ATNR   0x00000000      /* Access type == no retry */
-+#define FLASHCTL_ATR    0x80000000      /* Access type == retry every */
-+#define FLASHCTL_ATR4   0xc0000000      /* Access type == retry every 4 */
-+
-+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices.  */
-+#define AR531X_FLASHCTL0        (AR531X_FLASHCTL + 0x00)
-+#define AR531X_FLASHCTL1        (AR531X_FLASHCTL + 0x04)
-+#define AR531X_FLASHCTL2        (AR531X_FLASHCTL + 0x08)
-+
-+/* ARM SDRAM Controller -- just enough to determine memory size */
-+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
-+#define MEM_CFG1_AC0    0x00000700      /* bank 0: SDRAM addr check (added) */
-+#define MEM_CFG1_AC0_S  8
-+#define MEM_CFG1_AC1    0x00007000      /* bank 1: SDRAM addr check (added) */
-+#define MEM_CFG1_AC1_S  12
-+
-+/* GPIO Address Map */
-+#define AR531X_GPIO         (AR531X_APBBASE  + 0x2000)
-+#define AR531X_GPIO_DO      (AR531X_GPIO + 0x00)        /* output register */
-+#define AR531X_GPIO_DI      (AR531X_GPIO + 0x04)        /* intput register */
-+#define AR531X_GPIO_CR      (AR531X_GPIO + 0x08)        /* control register */
-+
-+/* GPIO Control Register bit field definitions */
-+#define GPIO_CR_M(x)    (1 << (x))                      /* mask for i/o */
-+#define GPIO_CR_O(x)    (0 << (x))                      /* mask for output */
-+#define GPIO_CR_I(x)    (1 << (x))                      /* mask for input */
-+#define GPIO_CR_INT(x)  (1 << ((x)+8))                  /* mask for interrupt */
-+#define GPIO_CR_UART(x) (1 << ((x)+16))                 /* uart multiplex */
-+
-+
-+typedef unsigned int AR531X_REG;
-+
-+#define sysRegRead(phys)	\
-+	(*(volatile AR531X_REG *)PHYS_TO_K1(phys))
-+
-+#define sysRegWrite(phys, val)	\
-+	((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val))
-+
-+
-+/*
-+ * This is board-specific data that is stored in a "fixed" location in flash.
-+ * It is shared across operating systems, so it should not be changed lightly.
-+ * The main reason we need it is in order to extract the ethernet MAC
-+ * address(es).
-+ */
-+struct ar531x_boarddata {
-+    u32 magic;                       /* board data is valid */
-+#define AR531X_BD_MAGIC 0x35333131   /* "5311", for all 531x platforms */
-+    u16 cksum;                       /* checksum (starting with BD_REV 2) */
-+    u16 rev;                         /* revision of this struct */
-+#define BD_REV  4
-+    char   boardName[64];            /* Name of board */
-+    u16 major;                       /* Board major number */
-+    u16 minor;                       /* Board minor number */
-+    u32 config;                      /* Board configuration */
-+#define BD_ENET0        0x00000001   /* ENET0 is stuffed */
-+#define BD_ENET1        0x00000002   /* ENET1 is stuffed */
-+#define BD_UART1        0x00000004   /* UART1 is stuffed */
-+#define BD_UART0        0x00000008   /* UART0 is stuffed (dma) */
-+#define BD_RSTFACTORY   0x00000010   /* Reset factory defaults stuffed */
-+#define BD_SYSLED       0x00000020   /* System LED stuffed */
-+#define BD_EXTUARTCLK   0x00000040   /* External UART clock */
-+#define BD_CPUFREQ      0x00000080   /* cpu freq is valid in nvram */
-+#define BD_SYSFREQ      0x00000100   /* sys freq is set in nvram */
-+#define BD_WLAN0        0x00000200   /* Enable WLAN0 */
-+#define BD_MEMCAP       0x00000400   /* CAP SDRAM @ memCap for testing */
-+#define BD_DISWATCHDOG  0x00000800   /* disable system watchdog */
-+#define BD_WLAN1        0x00001000   /* Enable WLAN1 (ar5212) */
-+#define BD_ISCASPER     0x00002000   /* FLAG for AR2312 */
-+#define BD_WLAN0_2G_EN  0x00004000   /* FLAG for radio0_2G */
-+#define BD_WLAN0_5G_EN  0x00008000   /* FLAG for radio0_2G */
-+#define BD_WLAN1_2G_EN  0x00020000   /* FLAG for radio0_2G */
-+#define BD_WLAN1_5G_EN  0x00040000   /* FLAG for radio0_2G */
-+    u16 resetConfigGpio;             /* Reset factory GPIO pin */
-+    u16 sysLedGpio;                  /* System LED GPIO pin */
-+
-+    u32 cpuFreq;                     /* CPU core frequency in Hz */
-+    u32 sysFreq;                     /* System frequency in Hz */
-+    u32 cntFreq;                     /* Calculated C0_COUNT frequency */
-+
-+    u8  wlan0Mac[6];
-+    u8  enet0Mac[6];
-+    u8  enet1Mac[6];
-+
-+    u16 pciId;                       /* Pseudo PCIID for common code */
-+    u16 memCap;                      /* cap bank1 in MB */
-+
-+    /* version 3 */
-+    u8  wlan1Mac[6];                 /* (ar5212) */
-+};
-+
-+#else
-+
-+/*
-+ * Address map
-+ */
-+#define AR5315_SDRAM0           0x00000000      /* DRAM */
-+#define AR5315_SPI_READ         0x08000000      /* SPI FLASH */
-+#define AR5315_WLAN0            0xB0000000      /* Wireless MMR */
-+#define AR5315_PCI              0xB0100000      /* PCI MMR */
-+#define AR5315_SDRAMCTL         0xB0300000      /* SDRAM MMR */
-+#define AR5315_LOCAL            0xB0400000      /* LOCAL BUS MMR */
-+#define AR5315_ENET0            0xB0500000      /* ETHERNET MMR */
-+#define AR5315_DSLBASE          0xB1000000      /* RESET CONTROL MMR */
-+#define AR5315_UART0            0xB1100003      /* UART MMR */
-+#define AR5315_SPI              0xB1300000      /* SPI FLASH MMR */
-+#define AR5315_FLASHBT          0xBfc00000      /* ro boot alias to FLASH */
-+#define AR5315_RAM1             0x40000000      /* ram alias */
-+#define AR5315_PCIEXT           0x80000000      /* pci external */
-+#define AR5315_RAM2             0xc0000000      /* ram alias */
-+#define AR5315_RAM3             0xe0000000      /* ram alias */
-+
-+/*
-+ * Reset Register
-+ */
-+#define AR5315_COLD_RESET       (AR5315_DSLBASE + 0x0000)
-+
-+/* Cold Reset */
-+#define RESET_COLD_AHB              0x00000001
-+#define RESET_COLD_APB              0x00000002
-+#define RESET_COLD_CPU              0x00000004
-+#define RESET_COLD_CPUWARM          0x00000008
-+#define RESET_SYSTEM                (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB)      /* full system */
-+
-+/* Warm Reset */
-+
-+#define AR5315_RESET            (AR5315_DSLBASE + 0x0004)
-+
-+#define RESET_WARM_WLAN0_MAC        0x00000001      /* warm reset WLAN0 MAC */
-+#define RESET_WARM_WLAN0_BB         0x00000002      /* warm reset WLAN0 BaseBand */
-+#define RESET_MPEGTS_RSVD           0x00000004      /* warm reset MPEG-TS */
-+#define RESET_PCIDMA                0x00000008      /* warm reset PCI ahb/dma */
-+#define RESET_MEMCTL                0x00000010      /* warm reset memory controller */
-+#define RESET_LOCAL                 0x00000020      /* warm reset local bus */
-+#define RESET_I2C_RSVD              0x00000040      /* warm reset I2C bus */
-+#define RESET_SPI                   0x00000080      /* warm reset SPI interface */
-+#define RESET_UART0                 0x00000100      /* warm reset UART0 */
-+#define RESET_IR_RSVD               0x00000200      /* warm reset IR interface */
-+#define RESET_EPHY0                 0x00000400      /* cold reset ENET0 phy */
-+#define RESET_ENET0                 0x00000800      /* cold reset ENET0 mac */
-+
-+/*
-+ * AHB master arbitration control
-+ */
-+#define AR5315_AHB_ARB_CTL      (AR5315_DSLBASE + 0x0008)
-+
-+#define ARB_CPU                     0x00000001      /* CPU, default */
-+#define ARB_WLAN                    0x00000002      /* WLAN */
-+#define ARB_MPEGTS_RSVD             0x00000004      /* MPEG-TS */
-+#define ARB_LOCAL                   0x00000008      /* LOCAL */
-+#define ARB_PCI                     0x00000010      /* PCI */
-+#define ARB_ETHERNET                0x00000020      /* Ethernet */
-+#define ARB_RETRY                   0x00000100      /* retry policy, debug only */
-+
-+/*
-+ * Config Register
-+ */
-+#define AR5315_ENDIAN_CTL       (AR5315_DSLBASE + 0x000c)
-+
-+#define CONFIG_AHB                  0x00000001      /* EC - AHB bridge endianess */
-+#define CONFIG_WLAN                 0x00000002      /* WLAN byteswap */
-+#define CONFIG_MPEGTS_RSVD          0x00000004      /* MPEG-TS byteswap */
-+#define CONFIG_PCI                  0x00000008      /* PCI byteswap */
-+#define CONFIG_MEMCTL               0x00000010      /* Memory controller endianess */
-+#define CONFIG_LOCAL                0x00000020      /* Local bus byteswap */
-+#define CONFIG_ETHERNET             0x00000040      /* Ethernet byteswap */
-+
-+#define CONFIG_MERGE                0x00000200      /* CPU write buffer merge */
-+#define CONFIG_CPU                  0x00000400      /* CPU big endian */
-+#define CONFIG_PCIAHB               0x00000800
-+#define CONFIG_PCIAHB_BRIDGE        0x00001000
-+#define CONFIG_SPI                  0x00008000      /* SPI byteswap */
-+#define CONFIG_CPU_DRAM             0x00010000
-+#define CONFIG_CPU_PCI              0x00020000
-+#define CONFIG_CPU_MMR              0x00040000
-+#define CONFIG_BIG                  0x00000400      
-+
-+
-+/*
-+ * NMI control
-+ */
-+#define AR5315_NMI_CTL          (AR5315_DSLBASE + 0x0010)
-+
-+#define NMI_EN  1
-+
-+/*
-+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
-+ */
-+#define AR5315_SREV             (AR5315_DSLBASE + 0x0014)
-+
-+#define REV_MAJ                     0x00f0
-+#define REV_MAJ_S                   4
-+#define REV_MIN                     0x000f
-+#define REV_MIN_S                   0
-+#define REV_CHIP                    (REV_MAJ|REV_MIN)
-+
-+/*
-+ * Interface Enable
-+ */
-+#define AR5315_IF_CTL           (AR5315_DSLBASE + 0x0018)
-+
-+#define IF_MASK                     0x00000007
-+#define IF_DISABLED                 0
-+#define IF_PCI                      1
-+#define IF_TS_LOCAL                 2
-+#define IF_ALL                      3   /* only for emulation with separate pins */
-+#define IF_LOCAL_HOST               0x00000008
-+#define IF_PCI_HOST                 0x00000010
-+#define IF_PCI_INTR                 0x00000020
-+#define IF_PCI_CLK_MASK             0x00030000
-+#define IF_PCI_CLK_INPUT            0 
-+#define IF_PCI_CLK_OUTPUT_LOW       1
-+#define IF_PCI_CLK_OUTPUT_CLK       2
-+#define IF_PCI_CLK_OUTPUT_HIGH      3
-+#define IF_PCI_CLK_SHIFT            16 
-+ 
-+                
-+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define REV_MAJ_AR5311              0x01
-+#define REV_MAJ_AR5312              0x04
-+#define REV_MAJ_AR5315              0x0B
-+
-+/*
-+ * APB Interrupt control
-+ */
-+
-+#define AR5315_ISR              (AR5315_DSLBASE + 0x0020)
-+#define AR5315_IMR              (AR5315_DSLBASE + 0x0024)
-+#define AR5315_GISR             (AR5315_DSLBASE + 0x0028)
-+
-+#define ISR_UART0                   0x0001           /* high speed UART */
-+#define ISR_I2C_RSVD                0x0002           /* I2C bus */
-+#define ISR_SPI                     0x0004           /* SPI bus */
-+#define ISR_AHB                     0x0008           /* AHB error */
-+#define ISR_APB                     0x0010           /* APB error */
-+#define ISR_TIMER                   0x0020           /* timer */
-+#define ISR_GPIO                    0x0040           /* GPIO */
-+#define ISR_WD                      0x0080           /* watchdog */
-+#define ISR_IR_RSVD                 0x0100           /* IR */
-+                                
-+#define IMR_UART0                   ISR_UART0
-+#define IMR_I2C_RSVD                ISR_I2C_RSVD
-+#define IMR_SPI                     ISR_SPI
-+#define IMR_AHB                     ISR_AHB
-+#define IMR_APB                     ISR_APB
-+#define IMR_TIMER                   ISR_TIMER
-+#define IMR_GPIO                    ISR_GPIO
-+#define IMR_WD                      ISR_WD
-+#define IMR_IR_RSVD                 ISR_IR_RSVD
-+
-+#define GISR_MISC                   0x0001
-+#define GISR_WLAN0                  0x0002
-+#define GISR_MPEGTS_RSVD            0x0004
-+#define GISR_LOCALPCI               0x0008
-+#define GISR_WMACPOLL               0x0010
-+#define GISR_TIMER                  0x0020
-+#define GISR_ETHERNET               0x0040
-+
-+/*
-+ * Interrupt routing from IO to the processor IP bits
-+ * Define our inter mask and level
-+ */
-+#define AR5315_INTR_MISCIO      SR_IBIT3
-+#define AR5315_INTR_WLAN0       SR_IBIT4
-+#define AR5315_INTR_ENET0       SR_IBIT5
-+#define AR5315_INTR_LOCALPCI    SR_IBIT6
-+#define AR5315_INTR_WMACPOLL    SR_IBIT7
-+#define AR5315_INTR_COMPARE     SR_IBIT8
-+
-+/*
-+ * Timers
-+ */
-+#define AR5315_TIMER            (AR5315_DSLBASE + 0x0030)
-+#define AR5315_RELOAD           (AR5315_DSLBASE + 0x0034)
-+#define AR5315_WD               (AR5315_DSLBASE + 0x0038)
-+#define AR5315_WDC              (AR5315_DSLBASE + 0x003c)
-+
-+#define WDC_RESET                   0x00000002               /* reset on watchdog */
-+#define WDC_NMI                     0x00000001               /* NMI on watchdog */
-+#define WDC_IGNORE_EXPIRATION       0x00000000
-+
-+/*
-+ * Interface Debug
-+ */
-+#define AR531X_FLASHDBG             (AR531X_RESETTMR + 0x0040)
-+#define AR531X_MIIDBG               (AR531X_RESETTMR + 0x0044)
-+
-+
-+/*
-+ * CPU Performance Counters
-+ */
-+#define AR5315_PERFCNT0         (AR5315_DSLBASE + 0x0048)
-+#define AR5315_PERFCNT1         (AR5315_DSLBASE + 0x004c)
-+
-+#define PERF_DATAHIT                0x0001  /* Count Data Cache Hits */
-+#define PERF_DATAMISS               0x0002  /* Count Data Cache Misses */
-+#define PERF_INSTHIT                0x0004  /* Count Instruction Cache Hits */
-+#define PERF_INSTMISS               0x0008  /* Count Instruction Cache Misses */
-+#define PERF_ACTIVE                 0x0010  /* Count Active Processor Cycles */
-+#define PERF_WBHIT                  0x0020  /* Count CPU Write Buffer Hits */
-+#define PERF_WBMISS                 0x0040  /* Count CPU Write Buffer Misses */
-+                                
-+#define PERF_EB_ARDY                0x0001  /* Count EB_ARdy signal */
-+#define PERF_EB_AVALID              0x0002  /* Count EB_AValid signal */
-+#define PERF_EB_WDRDY               0x0004  /* Count EB_WDRdy signal */
-+#define PERF_EB_RDVAL               0x0008  /* Count EB_RdVal signal */
-+#define PERF_VRADDR                 0x0010  /* Count valid read address cycles */
-+#define PERF_VWADDR                 0x0020  /* Count valid write address cycles */
-+#define PERF_VWDATA                 0x0040  /* Count valid write data cycles */
-+
-+/*
-+ * AHB Error Reporting.
-+ */
-+#define AR5315_AHB_ERR0         (AR5315_DSLBASE + 0x0050)  /* error  */
-+#define AR5315_AHB_ERR1         (AR5315_DSLBASE + 0x0054)  /* haddr  */
-+#define AR5315_AHB_ERR2         (AR5315_DSLBASE + 0x0058)  /* hwdata */
-+#define AR5315_AHB_ERR3         (AR5315_DSLBASE + 0x005c)  /* hrdata */
-+#define AR5315_AHB_ERR4         (AR5315_DSLBASE + 0x0060)  /* status */
-+
-+#define AHB_ERROR_DET               1   /* AHB Error has been detected,          */
-+                                        /* write 1 to clear all bits in ERR0     */
-+#define AHB_ERROR_OVR               2   /* AHB Error overflow has been detected  */
-+#define AHB_ERROR_WDT               4   /* AHB Error due to wdt instead of hresp */
-+
-+#define PROCERR_HMAST               0x0000000f
-+#define PROCERR_HMAST_DFLT          0
-+#define PROCERR_HMAST_WMAC          1
-+#define PROCERR_HMAST_ENET          2
-+#define PROCERR_HMAST_PCIENDPT      3
-+#define PROCERR_HMAST_LOCAL         4
-+#define PROCERR_HMAST_CPU           5
-+#define PROCERR_HMAST_PCITGT        6
-+                                    
-+#define PROCERR_HMAST_S             0
-+#define PROCERR_HWRITE              0x00000010
-+#define PROCERR_HSIZE               0x00000060
-+#define PROCERR_HSIZE_S             5
-+#define PROCERR_HTRANS              0x00000180
-+#define PROCERR_HTRANS_S            7
-+#define PROCERR_HBURST              0x00000e00
-+#define PROCERR_HBURST_S            9
-+
-+
-+
-+/*
-+ * Clock Control
-+ */
-+#define AR5315_PLLC_CTL         (AR5315_DSLBASE + 0x0064)
-+#define AR5315_PLLV_CTL         (AR5315_DSLBASE + 0x0068)
-+#define AR5315_CPUCLK           (AR5315_DSLBASE + 0x006c)
-+#define AR5315_AMBACLK          (AR5315_DSLBASE + 0x0070)
-+#define AR5315_SYNCCLK          (AR5315_DSLBASE + 0x0074)
-+#define AR5315_DSL_SLEEP_CTL    (AR5315_DSLBASE + 0x0080)
-+#define AR5315_DSL_SLEEP_DUR    (AR5315_DSLBASE + 0x0084)
-+
-+/* PLLc Control fields */
-+#define PLLC_REF_DIV_M              0x00000003
-+#define PLLC_REF_DIV_S              0
-+#define PLLC_FDBACK_DIV_M           0x0000007C
-+#define PLLC_FDBACK_DIV_S           2
-+#define PLLC_ADD_FDBACK_DIV_M       0x00000080
-+#define PLLC_ADD_FDBACK_DIV_S       7
-+#define PLLC_CLKC_DIV_M             0x0001c000
-+#define PLLC_CLKC_DIV_S             14
-+#define PLLC_CLKM_DIV_M             0x00700000
-+#define PLLC_CLKM_DIV_S             20
-+
-+/* CPU CLK Control fields */
-+#define CPUCLK_CLK_SEL_M            0x00000003
-+#define CPUCLK_CLK_SEL_S            0
-+#define CPUCLK_CLK_DIV_M            0x0000000c
-+#define CPUCLK_CLK_DIV_S            2
-+
-+/* AMBA CLK Control fields */
-+#define AMBACLK_CLK_SEL_M           0x00000003
-+#define AMBACLK_CLK_SEL_S           0
-+#define AMBACLK_CLK_DIV_M           0x0000000c
-+#define AMBACLK_CLK_DIV_S           2
-+
-+#if defined(COBRA_EMUL)
-+#define AR5315_AMBA_CLOCK_RATE  20000000
-+#define AR5315_CPU_CLOCK_RATE   40000000
-+#else
-+#if defined(DEFAULT_PLL)
-+#define AR5315_AMBA_CLOCK_RATE  40000000
-+#define AR5315_CPU_CLOCK_RATE   40000000
-+#else
-+#define AR5315_AMBA_CLOCK_RATE  92000000
-+#define AR5315_CPU_CLOCK_RATE   184000000
-+#endif /* ! DEFAULT_PLL */
-+#endif /* ! COBRA_EMUL */
-+
-+#define AR5315_UART_CLOCK_RATE  AR5315_AMBA_CLOCK_RATE
-+#define AR5315_SDRAM_CLOCK_RATE AR5315_AMBA_CLOCK_RATE
-+
-+/*
-+ * The UART computes baud rate as:
-+ *   baud = clock / (16 * divisor)
-+ * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL).
-+ */
-+#define DESIRED_BAUD_RATE           38400
-+
-+/*
-+ * The WATCHDOG value is computed as
-+ *  10 seconds * AR531X_WATCHDOG_CLOCK_RATE
-+ */
-+#define DESIRED_WATCHDOG_SECONDS    10
-+#define AR531X_WATCHDOG_TIME \
-+        (DESIRED_WATCHDOG_SECONDS * AR531X_WATCHDOG_CLOCK_RATE)
-+
-+
-+#define CLOCKCTL_UART0  0x0010  /* enable UART0 external clock */
-+
-+
-+ /*
-+ * Applicable "PCICFG" bits for WLAN(s).  Assoc status and LED mode.
-+ */
-+#define AR531X_PCICFG               (AR531X_RESETTMR + 0x00b0)
-+#define ASSOC_STATUS_M              0x00000003
-+#define ASSOC_STATUS_NONE           0
-+#define ASSOC_STATUS_PENDING        1   
-+#define ASSOC_STATUS_ASSOCIATED     2
-+#define LED_MODE_M                  0x0000001c
-+#define LED_BLINK_THRESHOLD_M       0x000000e0
-+#define LED_SLOW_BLINK_MODE         0x00000100
-+
-+/*
-+ * GPIO
-+ */
-+
-+#define AR5315_GPIO_DI          (AR5315_DSLBASE + 0x0088)
-+#define AR5315_GPIO_DO          (AR5315_DSLBASE + 0x0090)
-+#define AR5315_GPIO_CR          (AR5315_DSLBASE + 0x0098)
-+#define AR5315_GPIO_INT         (AR5315_DSLBASE + 0x00a0)
-+
-+#define GPIO_CR_M(x)                (1 << (x))                  /* mask for i/o */
-+#define GPIO_CR_O(x)                (1 << (x))                  /* output */
-+#define GPIO_CR_I(x)                (0 << (x))                  /* input */
-+
-+#define GPIO_INT(x,Y)               ((x) << (8 * (Y)))          /* interrupt enable */
-+#define GPIO_INT_M(Y)               ((0x3F) << (8 * (Y)))       /* mask for int */
-+#define GPIO_INT_LVL(x,Y)           ((x) << (8 * (Y) + 6))      /* interrupt level */
-+#define GPIO_INT_LVL_M(Y)           ((0x3) << (8 * (Y) + 6))    /* mask for int level */
-+
-+#define AR5315_RESET_GPIO       5
-+#define AR5315_NUM_GPIO         22
-+
-+    
-+/* 
-+ *  PCI Clock Control
-+ */     
-+ 
-+#define AR5315_PCICLK           (AR5315_DSLBASE + 0x00a4)
-+
-+#define PCICLK_INPUT_M              0x3
-+#define PCICLK_INPUT_S              0
-+                         
-+#define PCICLK_PLLC_CLKM            0
-+#define PCICLK_PLLC_CLKM1           1
-+#define PCICLK_PLLC_CLKC            2
-+#define PCICLK_REF_CLK              3 
-+
-+#define PCICLK_DIV_M                0xc
-+#define PCICLK_DIV_S                2
-+                         
-+#define PCICLK_IN_FREQ              0
-+#define PCICLK_IN_FREQ_DIV_6        1
-+#define PCICLK_IN_FREQ_DIV_8        2
-+#define PCICLK_IN_FREQ_DIV_10       3 
-+
-+/*
-+ * Observation Control Register
-+ */
-+#define AR5315_OCR              (AR5315_DSLBASE + 0x00b0)
-+#define OCR_GPIO0_IRIN              0x0040
-+#define OCR_GPIO1_IROUT             0x0080
-+#define OCR_GPIO3_RXCLR             0x0200
-+
-+/* 
-+ *  General Clock Control
-+ */     
-+ 
-+#define AR5315_MISCCLK          (AR5315_DSLBASE + 0x00b4)
-+#define MISCCLK_PLLBYPASS_EN        0x00000001
-+#define MISCCLK_PROCREFCLK          0x00000002
-+
-+/*
-+ * SDRAM Controller
-+ *   - No read or write buffers are included.
-+ */
-+#define AR5315_MEM_CFG          (AR5315_SDRAMCTL + 0x00)
-+#define AR5315_MEM_CTRL         (AR5315_SDRAMCTL + 0x0c)
-+#define AR5315_MEM_REF          (AR5315_SDRAMCTL + 0x10)
-+
-+#define SDRAM_DATA_WIDTH_M          0x00006000
-+#define SDRAM_DATA_WIDTH_S          13
-+
-+#define SDRAM_COL_WIDTH_M           0x00001E00
-+#define SDRAM_COL_WIDTH_S           9
-+
-+#define SDRAM_ROW_WIDTH_M           0x000001E0
-+#define SDRAM_ROW_WIDTH_S           5
-+
-+#define SDRAM_BANKADDR_BITS_M       0x00000018
-+#define SDRAM_BANKADDR_BITS_S       3
-+
-+
-+/*
-+ * SDRAM Memory Refresh (MEM_REF) value is computed as:
-+ * MEMCTL_SREFR = (Tr * hclk_freq) / R
-+ * where Tr is max. time of refresh of any single row
-+ * R is number of rows in the DRAM
-+ * For most 133MHz SDRAM parts, Tr=64ms, R=4096 or 8192
-+ */
-+#if defined(COBRA_EMUL)
-+#define AR5315_SDRAM_MEMORY_REFRESH_VALUE  0x96
-+#else 
-+#if defined(DEFAULT_PLL)
-+#define AR5315_SDRAM_MEMORY_REFRESH_VALUE  0x200
-+#else
-+#define AR5315_SDRAM_MEMORY_REFRESH_VALUE  0x61a
-+#endif /* ! DEFAULT_PLL */
-+#endif 
-+
-+#if defined(AR5315)
-+
-+#define AR5315_SDRAM_DDR_SDRAM      0   /* Not DDR SDRAM */
-+#define AR5315_SDRAM_DATA_WIDTH     16  /* bits */   
-+#define AR5315_SDRAM_COL_WIDTH      8
-+#define AR5315_SDRAM_ROW_WIDTH      12
-+
-+#else
-+
-+#define AR5315_SDRAM_DDR_SDRAM      0   /* Not DDR SDRAM */
-+#define AR5315_SDRAM_DATA_WIDTH     16
-+#define AR5315_SDRAM_COL_WIDTH      8
-+#define AR5315_SDRAM_ROW_WIDTH      12
-+
-+#endif /* ! AR5315 */
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+
-+#define AR5315_SPI_CTL      (AR5315_SPI + 0x00)
-+#define AR5315_SPI_OPCODE   (AR5315_SPI + 0x04)
-+#define AR5315_SPI_DATA     (AR5315_SPI + 0x08)
-+
-+#define SPI_CTL_START           0x00000100
-+#define SPI_CTL_BUSY            0x00010000
-+#define SPI_CTL_TXCNT_MASK      0x0000000f
-+#define SPI_CTL_RXCNT_MASK      0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
-+#define SPI_CTL_SIZE_MASK       0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK    0x03000000
-+#define SPI_OPCODE_MASK         0x000000ff
-+
-+/* 
-+ * PCI-MAC Configuration registers 
-+ */
-+#define PCI_MAC_RC              (AR5315_PCI + 0x4000) 
-+#define PCI_MAC_SCR             (AR5315_PCI + 0x4004)
-+#define PCI_MAC_INTPEND         (AR5315_PCI + 0x4008)
-+#define PCI_MAC_SFR             (AR5315_PCI + 0x400C)
-+#define PCI_MAC_PCICFG          (AR5315_PCI + 0x4010)
-+#define PCI_MAC_SREV            (AR5315_PCI + 0x4020)
-+
-+#define PCI_MAC_RC_MAC          0x00000001
-+#define PCI_MAC_RC_BB           0x00000002
-+
-+#define PCI_MAC_SCR_SLMODE_M    0x00030000
-+#define PCI_MAC_SCR_SLMODE_S    16        
-+#define PCI_MAC_SCR_SLM_FWAKE   0         
-+#define PCI_MAC_SCR_SLM_FSLEEP  1         
-+#define PCI_MAC_SCR_SLM_NORMAL  2         
-+
-+#define PCI_MAC_SFR_SLEEP       0x00000001
-+
-+#define PCI_MAC_PCICFG_SPWR_DN  0x00010000
-+
-+ 
-+
-+
-+/*
-+ * PCI Bus Interface Registers
-+ */
-+#define AR5315_PCI_1MS_REG      (AR5315_PCI + 0x0008)
-+#define AR5315_PCI_1MS_MASK     0x3FFFF         /* # of AHB clk cycles in 1ms */
-+
-+#define AR5315_PCI_MISC_CONFIG  (AR5315_PCI + 0x000c)
-+#define AR5315_PCIMISC_TXD_EN   0x00000001      /* Enable TXD for fragments */
-+#define AR5315_PCIMISC_CFG_SEL  0x00000002      /* mem or config cycles */
-+#define AR5315_PCIMISC_GIG_MASK 0x0000000C      /* bits 31-30 for pci req */
-+#define AR5315_PCIMISC_RST_MODE 0x00000030
-+#define AR5315_PCIRST_INPUT     0x00000000      /* 4:5=0 rst is input */
-+#define AR5315_PCIRST_LOW       0x00000010      /* 4:5=1 rst to GND */
-+#define AR5315_PCIRST_HIGH      0x00000020      /* 4:5=2 rst to VDD */
-+#define AR5315_PCIGRANT_EN      0x00000000      /* 6:7=0 early grant en */
-+#define AR5315_PCIGRANT_FRAME   0x00000040      /* 6:7=1 grant waits 4 frame */
-+#define AR5315_PCIGRANT_IDLE    0x00000080      /* 6:7=2 grant waits 4 idle */
-+#define AR5315_PCIGRANT_GAP     0x00000000      /* 6:7=2 grant waits 4 idle */
-+#define AR5315_PCICACHE_DIS     0x00001000      /* PCI external access cache disable */
-+
-+#define AR5315_PCI_OUT_TSTAMP   (AR5315_PCI + 0x0010)
-+
-+#define AR5315_PCI_UNCACHE_CFG  (AR5315_PCI + 0x0014)
-+
-+#define AR5315_PCI_IN_EN        (AR5315_PCI + 0x0100)
-+#define AR5315_PCI_IN_EN0       0x01            /* Enable chain 0 */
-+#define AR5315_PCI_IN_EN1       0x02            /* Enable chain 1 */
-+#define AR5315_PCI_IN_EN2       0x04            /* Enable chain 2 */
-+#define AR5315_PCI_IN_EN3       0x08            /* Enable chain 3 */
-+
-+#define AR5315_PCI_IN_DIS       (AR5315_PCI + 0x0104)
-+#define AR5315_PCI_IN_DIS0      0x01            /* Disable chain 0 */
-+#define AR5315_PCI_IN_DIS1      0x02            /* Disable chain 1 */
-+#define AR5315_PCI_IN_DIS2      0x04            /* Disable chain 2 */
-+#define AR5315_PCI_IN_DIS3      0x08            /* Disable chain 3 */
-+
-+#define AR5315_PCI_IN_PTR       (AR5315_PCI + 0x0200)
-+
-+#define AR5315_PCI_OUT_EN       (AR5315_PCI + 0x0400)
-+#define AR5315_PCI_OUT_EN0      0x01            /* Enable chain 0 */
-+
-+#define AR5315_PCI_OUT_DIS      (AR5315_PCI + 0x0404)
-+#define AR5315_PCI_OUT_DIS0     0x01            /* Disable chain 0 */
-+
-+#define AR5315_PCI_OUT_PTR      (AR5315_PCI + 0x0408)
-+
-+#define AR5315_PCI_INT_STATUS   (AR5315_PCI + 0x0500)   /* write one to clr */
-+#define AR5315_PCI_TXINT        0x00000001      /* Desc In Completed */
-+#define AR5315_PCI_TXOK         0x00000002      /* Desc In OK */
-+#define AR5315_PCI_TXERR        0x00000004      /* Desc In ERR */
-+#define AR5315_PCI_TXEOL        0x00000008      /* Desc In End-of-List */
-+#define AR5315_PCI_RXINT        0x00000010      /* Desc Out Completed */
-+#define AR5315_PCI_RXOK         0x00000020      /* Desc Out OK */
-+#define AR5315_PCI_RXERR        0x00000040      /* Desc Out ERR */
-+#define AR5315_PCI_RXEOL        0x00000080      /* Desc Out EOL */
-+#define AR5315_PCI_TXOOD        0x00000200      /* Desc In Out-of-Desc */
-+#define AR5315_PCI_MASK         0x0000FFFF      /* Desc Mask */
-+#define AR5315_PCI_EXT_INT      0x02000000      
-+#define AR5315_PCI_ABORT_INT    0x04000000      
-+
-+#define AR5315_PCI_INT_MASK     (AR5315_PCI + 0x0504)   /* same as INT_STATUS */
-+
-+#define AR5315_PCI_INTEN_REG    (AR5315_PCI + 0x0508)
-+#define AR5315_PCI_INT_DISABLE  0x00            /* disable pci interrupts */
-+#define AR5315_PCI_INT_ENABLE   0x01            /* enable pci interrupts */
-+
-+#define AR5315_PCI_HOST_IN_EN   (AR5315_PCI + 0x0800)
-+#define AR5315_PCI_HOST_IN_DIS  (AR5315_PCI + 0x0804)
-+#define AR5315_PCI_HOST_IN_PTR  (AR5315_PCI + 0x0810)
-+#define AR5315_PCI_HOST_OUT_EN  (AR5315_PCI + 0x0900)
-+#define AR5315_PCI_HOST_OUT_DIS (AR5315_PCI + 0x0904)
-+#define AR5315_PCI_HOST_OUT_PTR (AR5315_PCI + 0x0908)
-+
-+
-+/*
-+ * Local Bus Interface Registers
-+ */
-+#define AR5315_LB_CONFIG        (AR5315_LOCAL + 0x0000)
-+#define AR5315_LBCONF_OE        0x00000001      /* =1 OE is low-true */
-+#define AR5315_LBCONF_CS0       0x00000002      /* =1 first CS is low-true */
-+#define AR5315_LBCONF_CS1       0x00000004      /* =1 2nd CS is low-true */
-+#define AR5315_LBCONF_RDY       0x00000008      /* =1 RDY is low-true */
-+#define AR5315_LBCONF_WE        0x00000010      /* =1 Write En is low-true */
-+#define AR5315_LBCONF_WAIT      0x00000020      /* =1 WAIT is low-true */
-+#define AR5315_LBCONF_ADS       0x00000040      /* =1 Adr Strobe is low-true */
-+#define AR5315_LBCONF_MOT       0x00000080      /* =0 Intel, =1 Motorola */
-+#define AR5315_LBCONF_8CS       0x00000100      /* =1 8 bits CS, 0= 16bits */
-+#define AR5315_LBCONF_8DS       0x00000200      /* =1 8 bits Data S, 0=16bits */
-+#define AR5315_LBCONF_ADS_EN    0x00000400      /* =1 Enable ADS */
-+#define AR5315_LBCONF_ADR_OE    0x00000800      /* =1 Adr cap on OE, WE or DS */
-+#define AR5315_LBCONF_ADDT_MUX  0x00001000      /* =1 Adr and Data share bus */
-+#define AR5315_LBCONF_DATA_OE   0x00002000      /* =1 Data cap on OE, WE, DS */
-+#define AR5315_LBCONF_16DATA    0x00004000      /* =1 Data is 16 bits wide */
-+#define AR5315_LBCONF_SWAPDT    0x00008000      /* =1 Byte swap data */
-+#define AR5315_LBCONF_SYNC      0x00010000      /* =1 Bus synchronous to clk */
-+#define AR5315_LBCONF_INT       0x00020000      /* =1 Intr is low true */
-+#define AR5315_LBCONF_INT_CTR0  0x00000000      /* GND high-Z, Vdd is high-Z */
-+#define AR5315_LBCONF_INT_CTR1  0x00040000      /* GND drive, Vdd is high-Z */
-+#define AR5315_LBCONF_INT_CTR2  0x00080000      /* GND high-Z, Vdd drive */
-+#define AR5315_LBCONF_INT_CTR3  0x000C0000      /* GND drive, Vdd drive */
-+#define AR5315_LBCONF_RDY_WAIT  0x00100000      /* =1 RDY is negative of WAIT */
-+#define AR5315_LBCONF_INT_PULSE 0x00200000      /* =1 Interrupt is a pulse */
-+#define AR5315_LBCONF_ENABLE    0x00400000      /* =1 Falcon respond to LB */
-+
-+#define AR5315_LB_CLKSEL        (AR5315_LOCAL + 0x0004)
-+#define AR5315_LBCLK_EXT        0x0001          /* use external clk for lb */
-+
-+#define AR5315_LB_1MS           (AR5315_LOCAL + 0x0008)
-+#define AR5315_LB1MS_MASK       0x3FFFF         /* # of AHB clk cycles in 1ms */
-+
-+#define AR5315_LB_MISCCFG       (AR5315_LOCAL + 0x000C)
-+#define AR5315_LBM_TXD_EN       0x00000001      /* Enable TXD for fragments */
-+#define AR5315_LBM_RX_INTEN     0x00000002      /* Enable LB ints on RX ready */
-+#define AR5315_LBM_MBOXWR_INTEN 0x00000004      /* Enable LB ints on mbox wr */
-+#define AR5315_LBM_MBOXRD_INTEN 0x00000008      /* Enable LB ints on mbox rd */
-+#define AR5315_LMB_DESCSWAP_EN  0x00000010      /* Byte swap desc enable */
-+#define AR5315_LBM_TIMEOUT_MASK 0x00FFFF80
-+#define AR5315_LBM_TIMEOUT_SHFT 7
-+#define AR5315_LBM_PORTMUX      0x07000000
-+
-+
-+#define AR5315_LB_RXTSOFF       (AR5315_LOCAL + 0x0010)
-+
-+#define AR5315_LB_TX_CHAIN_EN   (AR5315_LOCAL + 0x0100)
-+#define AR5315_LB_TXEN_0        0x01
-+#define AR5315_LB_TXEN_1        0x02
-+#define AR5315_LB_TXEN_2        0x04
-+#define AR5315_LB_TXEN_3        0x08
-+
-+#define AR5315_LB_TX_CHAIN_DIS  (AR5315_LOCAL + 0x0104)
-+#define AR5315_LB_TX_DESC_PTR   (AR5315_LOCAL + 0x0200)
-+
-+#define AR5315_LB_RX_CHAIN_EN   (AR5315_LOCAL + 0x0400)
-+#define AR5315_LB_RXEN          0x01
-+
-+#define AR5315_LB_RX_CHAIN_DIS  (AR5315_LOCAL + 0x0404)
-+#define AR5315_LB_RX_DESC_PTR   (AR5315_LOCAL + 0x0408)
-+
-+#define AR5315_LB_INT_STATUS    (AR5315_LOCAL + 0x0500)
-+#define AR5315_INT_TX_DESC      0x0001
-+#define AR5315_INT_TX_OK        0x0002
-+#define AR5315_INT_TX_ERR       0x0004
-+#define AR5315_INT_TX_EOF       0x0008
-+#define AR5315_INT_RX_DESC      0x0010
-+#define AR5315_INT_RX_OK        0x0020
-+#define AR5315_INT_RX_ERR       0x0040
-+#define AR5315_INT_RX_EOF       0x0080
-+#define AR5315_INT_TX_TRUNC     0x0100
-+#define AR5315_INT_TX_STARVE    0x0200
-+#define AR5315_INT_LB_TIMEOUT   0x0400
-+#define AR5315_INT_LB_ERR       0x0800
-+#define AR5315_INT_MBOX_WR      0x1000
-+#define AR5315_INT_MBOX_RD      0x2000
-+
-+/* Bit definitions for INT MASK are the same as INT_STATUS */
-+#define AR5315_LB_INT_MASK      (AR5315_LOCAL + 0x0504)
-+
-+#define AR5315_LB_INT_EN        (AR5315_LOCAL + 0x0508)
-+#define AR5315_LB_MBOX          (AR5315_LOCAL + 0x0600)
-+
-+
-+
-+/*
-+ * IR Interface Registers
-+ */
-+#define AR5315_IR_PKTDATA                   (AR5315_IR + 0x0000)
-+
-+#define AR5315_IR_PKTLEN                    (AR5315_IR + 0x07fc) /* 0 - 63 */
-+
-+#define AR5315_IR_CONTROL                   (AR5315_IR + 0x0800)
-+#define AR5315_IRCTL_TX                     0x00000000  /* use as tranmitter */
-+#define AR5315_IRCTL_RX                     0x00000001  /* use as receiver   */
-+#define AR5315_IRCTL_SAMPLECLK_MASK         0x00003ffe  /* Sample clk divisor mask */
-+#define AR5315_IRCTL_SAMPLECLK_SHFT                  1
-+#define AR5315_IRCTL_OUTPUTCLK_MASK         0x03ffc000  /* Output clk divisor mask */
-+#define AR5315_IRCTL_OUTPUTCLK_SHFT                 14
-+
-+#define AR5315_IR_STATUS                    (AR5315_IR + 0x0804)
-+#define AR5315_IRSTS_RX                     0x00000001  /* receive in progress */
-+#define AR5315_IRSTS_TX                     0x00000002  /* transmit in progress */
-+
-+#define AR5315_IR_CONFIG                    (AR5315_IR + 0x0808)
-+#define AR5315_IRCFG_INVIN                  0x00000001  /* invert input polarity */
-+#define AR5315_IRCFG_INVOUT                 0x00000002  /* invert output polarity */
-+#define AR5315_IRCFG_SEQ_START_WIN_SEL      0x00000004  /* 1 => 28, 0 => 7 */
-+#define AR5315_IRCFG_SEQ_START_THRESH       0x000000f0  /*  */
-+#define AR5315_IRCFG_SEQ_END_UNIT_SEL       0x00000100  /*  */
-+#define AR5315_IRCFG_SEQ_END_UNIT_THRESH    0x00007e00  /*  */
-+#define AR5315_IRCFG_SEQ_END_WIN_SEL        0x00008000  /*  */
-+#define AR5315_IRCFG_SEQ_END_WIN_THRESH     0x001f0000  /*  */
-+#define AR5315_IRCFG_NUM_BACKOFF_WORDS      0x01e00000  /*  */
-+
-+/*
-+ * PCI memory constants: Memory area 1 and 2 are the same size -
-+ * (twice the PCI_TLB_PAGE_SIZE). The definition of
-+ * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine
-+ * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size
-+ * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space.
-+ */
-+ 
-+#define CPU_TO_PCI_MEM_BASE1    0xE0000000
-+#define CPU_TO_PCI_MEM_SIZE1    (2*PCI_TLB_PAGE_SIZE)
-+ 
-+
-+/* TLB attributes for PCI transactions */
-+
-+#define PCI_MMU_PAGEMASK        0x00003FFF
-+#define MMU_PAGE_UNCACHED       0x00000010
-+#define MMU_PAGE_DIRTY          0x00000004
-+#define MMU_PAGE_VALID          0x00000002
-+#define MMU_PAGE_GLOBAL         0x00000001
-+#define PCI_MMU_PAGEATTRIB      (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\
-+                                 MMU_PAGE_VALID|MMU_PAGE_GLOBAL)
-+#define PCI_MEMORY_SPACE1_VIRT  0xE0000000      /* Used for non-prefet  mem   */
-+#define PCI_MEMORY_SPACE1_PHYS  0x80000000
-+#define PCI_TLB_PAGE_SIZE       0x01000000
-+#define TLB_HI_MASK             0xFFFFE000
-+#define TLB_LO_MASK             0x3FFFFFFF
-+#define PAGEMASK_SHIFT          11
-+#define TLB_LO_SHIFT            6
-+
-+#define PCI_MAX_LATENCY         0xFFF           /* Max PCI latency            */
-+
-+#define HOST_PCI_DEV_ID         3
-+#define HOST_PCI_MBAR0          0x10000000
-+#define HOST_PCI_MBAR1          0x20000000
-+#define HOST_PCI_MBAR2          0x30000000
-+
-+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
-+#define PCI_DEVICE_MEM_SPACE    0x800000
-+
-+
-+typedef unsigned int AR531X_REG;
-+
-+#define sysRegRead(phys)	\
-+	(*(volatile AR531X_REG *)PHYS_TO_K1(phys))
-+
-+#define sysRegWrite(phys, val)	\
-+	((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val))
-+#endif
-+
-+#endif
-diff -urN linux-mips/arch/mips/ar531x/ar531xintr.S mips-linux-2.4.25/arch/mips/ar531x/ar531xintr.S
---- linux-mips/arch/mips/ar531x/ar531xintr.S	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/ar531xintr.S	2005-12-30 17:26:31.000823952 +0000
-@@ -0,0 +1,30 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+#include <asm/asm.h>
-+#include <asm/mipsregs.h>
-+#include <asm/regdef.h>
-+#include <asm/stackframe.h>
-+
-+/*
-+ * Glue code to save registers and get us to the interrupt dispatcher
-+ */
-+	.text
-+	.set	noat
-+	.align	5
-+NESTED(ar531x_interrupt_receive, PT_SIZE, sp)
-+	SAVE_ALL
-+	CLI
-+	.set	at
-+
-+	move	a0, sp
-+	jal	ar531x_irq_dispatch
-+
-+	j	ret_from_irq
-+
-+	END(ar531x_interrupt_receive)
-diff -urN linux-mips/arch/mips/ar531x/ar531xirq.c mips-linux-2.4.25/arch/mips/ar531x/ar531xirq.c
---- linux-mips/arch/mips/ar531x/ar531xirq.c	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/ar531xirq.c	2005-12-30 17:26:31.000823952 +0000
-@@ -0,0 +1,442 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * Interrupt support for AR531X WiSOC.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/interrupt.h>
-+#include <linux/slab.h>
-+#include <linux/random.h>
-+#include <linux/pm.h>
-+#include <linux/delay.h>
-+#include <linux/reboot.h>
-+
-+#include <asm/irq.h>
-+#include <asm/mipsregs.h>
-+#include <asm/gdb-stub.h>
-+
-+#include "ar531xlnx.h"
-+#include <asm/irq_cpu.h>
-+
-+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-+
-+static void ar531x_misc_intr_enable(unsigned int irq);
-+static void ar531x_misc_intr_disable(unsigned int irq);
-+
-+/* Turn on the specified AR531X_MISC_IRQ interrupt */
-+static unsigned int
-+ar531x_misc_intr_startup(unsigned int irq)
-+{
-+	ar531x_misc_intr_enable(irq);
-+	return 0;
-+}
-+
-+/* Turn off the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar531x_misc_intr_shutdown(unsigned int irq)
-+{
-+	ar531x_misc_intr_disable(irq);
-+}
-+
-+/* Enable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar531x_misc_intr_enable(unsigned int irq)
-+{
-+	unsigned int imr;
-+
-+#if CONFIG_AR5315
-+	imr = sysRegRead(AR5315_IMR);
-+        switch(irq)
-+        {
-+           case AR531X_MISC_IRQ_TIMER:
-+             imr |= IMR_TIMER;
-+	     break;
-+
-+	   case AR531X_MISC_IRQ_AHB_PROC:
-+             imr |= IMR_AHB;
-+	     break;
-+
-+           case AR531X_MISC_IRQ_AHB_DMA:
-+             imr |= 0/* ?? */;
-+	     break;
-+	     /*
-+	   case	AR531X_ISR_GPIO:
-+             imr |= IMR_GPIO;
-+             break;
-+             */
-+
-+	   case AR531X_MISC_IRQ_UART0:
-+             imr |= IMR_UART0;
-+             break;
-+
-+
-+           case	AR531X_MISC_IRQ_WATCHDOG:
-+             imr |= IMR_WD;
-+             break;
-+
-+	   case AR531X_MISC_IRQ_LOCAL:
-+             imr |= 0/* ?? */;
-+             break;
-+
-+        }
-+	sysRegWrite(AR5315_IMR, imr);
-+	imr=sysRegRead(AR5315_IMR); /* flush write buffer */
-+        //printk("enable Interrupt irq 0x%x imr 0x%x \n",irq,imr);
-+
-+#else
-+	imr = sysRegRead(AR531X_IMR);
-+	imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-+	sysRegWrite(AR531X_IMR, imr);
-+	sysRegRead(AR531X_IMR); /* flush write buffer */
-+#endif
-+}
-+
-+/* Disable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar531x_misc_intr_disable(unsigned int irq)
-+{
-+	unsigned int imr;
-+
-+#if CONFIG_AR5315
-+	imr = sysRegRead(AR5315_IMR);
-+        switch(irq)
-+        {
-+           case AR531X_MISC_IRQ_TIMER:
-+             imr &= (~IMR_TIMER);
-+	     break;
-+
-+	   case AR531X_MISC_IRQ_AHB_PROC:
-+             imr &= (~IMR_AHB);
-+	     break;
-+
-+           case AR531X_MISC_IRQ_AHB_DMA:
-+             imr &= 0/* ?? */;
-+	     break;
-+	     /*
-+	   case	AR531X_ISR_GPIO:
-+             imr &= ~IMR_GPIO;
-+             break;
-+             */
-+
-+	   case AR531X_MISC_IRQ_UART0:
-+             imr &= (~IMR_UART0);
-+             break;
-+
-+           case	AR531X_MISC_IRQ_WATCHDOG:
-+             imr &= (~IMR_WD);
-+             break;
-+
-+	   case AR531X_MISC_IRQ_LOCAL:
-+             imr &= ~0/* ?? */;
-+             break;
-+
-+        }
-+	sysRegWrite(AR5315_IMR, imr);
-+	sysRegRead(AR5315_IMR); /* flush write buffer */
-+#else
-+	imr = sysRegRead(AR531X_IMR);
-+	imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-+	sysRegWrite(AR531X_IMR, imr);
-+	sysRegRead(AR531X_IMR); /* flush write buffer */
-+#endif
-+}
-+
-+static void
-+ar531x_misc_intr_ack(unsigned int irq)
-+{
-+	ar531x_misc_intr_disable(irq);
-+}
-+
-+static void
-+ar531x_misc_intr_end(unsigned int irq)
-+{
-+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+		ar531x_misc_intr_enable(irq);
-+}
-+
-+static void
-+ar531x_misc_intr_set_affinity(unsigned int irq, unsigned long mask)
-+{
-+	/* Only 1 CPU; ignore affinity request */
-+}
-+
-+struct hw_interrupt_type ar531x_misc_intr_controller = {
-+	"AR531X MISC",
-+	ar531x_misc_intr_startup,
-+	ar531x_misc_intr_shutdown,
-+	ar531x_misc_intr_enable,
-+	ar531x_misc_intr_disable,
-+	ar531x_misc_intr_ack,
-+	ar531x_misc_intr_end,
-+	ar531x_misc_intr_set_affinity,
-+};
-+
-+int ar531x_misc_irq_base;
-+
-+/*
-+ * Determine interrupt source among interrupts that use IP6
-+ */
-+void
-+ar531x_misc_intr_init(int irq_base)
-+{
-+	int i;
-+
-+	for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
-+		irq_desc[i].status = IRQ_DISABLED;
-+		irq_desc[i].action = NULL;
-+		irq_desc[i].depth = 1;
-+		irq_desc[i].handler = &ar531x_misc_intr_controller;
-+	}
-+
-+	ar531x_misc_irq_base = irq_base;
-+}
-+
-+/* ARGSUSED */
-+void
-+spurious_irq_handler(int cpl, void *dev_id, struct pt_regs *regs)
-+{
-+    /* 
-+    printk("spurious_irq_handler: %d  cause=0x%8.8x  status=0x%8.8x\n",
-+           cpl, cause_intrs, status_intrs); 
-+    */
-+}
-+
-+/* ARGSUSED */
-+void
-+spurious_misc_handler(int cpl, void *dev_id, struct pt_regs *regs)
-+{
-+    /*
-+    printk("spurious_misc_handler: 0x%x isr=0x%8.8x imr=0x%8.8x\n",
-+           cpl, ar531x_isr, ar531x_imr);
-+    */
-+}
-+
-+void
-+ar531x_timer_handler(int cpl, void *dev_id, struct pt_regs *regs)
-+{
-+#if CONFIG_AR5315
-+	(void)sysRegRead(AR5315_TIMER); /* clear interrupt */
-+#else
-+	(void)sysRegRead(AR531X_TIMER); /* clear interrupt */
-+#endif
-+}
-+
-+void
-+ar531x_ahb_proc_handler(int cpl, void *dev_id, struct pt_regs *regs)
-+{
-+    u32 procAddr;
-+    u32 proc1;
-+    u32 dmaAddr;
-+    u32 dma1;
-+#if CONFIG_AR5315
-+    sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
-+    sysRegRead(AR5315_AHB_ERR1);
-+#else
-+    proc1 = sysRegRead(AR531X_PROC1);
-+    procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */
-+    dma1 = sysRegRead(AR531X_DMA1);
-+    dmaAddr = sysRegRead(AR531X_DMAADDR);   /* clears error state */
-+#endif
-+
-+    printk("AHB interrupt: PROCADDR=0x%8.8x  PROC1=0x%8.8x  DMAADDR=0x%8.8x  DMA1=0x%8.8x\n",
-+        procAddr, proc1, dmaAddr, dma1);
-+        
-+    machine_restart("AHB error"); /* Catastrophic failure */
-+}
-+
-+static struct irqaction cascade  =
-+	{no_action, SA_INTERRUPT, 0, "cascade",
-+            NULL, NULL};
-+
-+static struct irqaction spurious_irq =
-+	{spurious_irq_handler, SA_INTERRUPT, 0, "spurious_irq",
-+            NULL, NULL};
-+
-+static struct irqaction spurious_misc =
-+	{spurious_misc_handler, SA_INTERRUPT, 0, "spurious_misc",
-+            NULL, NULL};
-+
-+static struct irqaction ar531x_timer_interrupt =
-+	{ar531x_timer_handler, SA_INTERRUPT, 0, "ar531x_timer_interrupt",
-+            NULL, NULL};
-+
-+static struct irqaction ar531x_ahb_proc_interrupt =
-+	{ar531x_ahb_proc_handler, SA_INTERRUPT, 0, "ar531x_ahb_proc_interrupt",
-+            NULL, NULL};
-+
-+extern asmlinkage void ar531x_interrupt_receive(void);
-+
-+/*
-+ * Called when an interrupt is received, this function
-+ * determines exactly which interrupt it was, and it
-+ * invokes the appropriate handler.
-+ *
-+ * Implicitly, we also define interrupt priority by
-+ * choosing which to dispatch first.
-+ */
-+extern void dump_uart(void *);
-+
-+#if CONFIG_AR5315
-+
-+void
-+ar531x_irq_dispatch(struct pt_regs *regs)
-+{
-+	int cause_intrs = regs->cp0_cause;
-+	int status_intrs = regs->cp0_status;
-+	int pending = cause_intrs & status_intrs;
-+
-+	if (pending & CAUSEF_IP3) {
-+		do_IRQ(AR531X_IRQ_WLAN0_INTRS, regs);
-+	}		
-+	else if (pending & CAUSEF_IP4) {
-+		do_IRQ(AR531X_IRQ_ENET0_INTRS, regs);
-+	}
-+	else if (pending & CAUSEF_IP2) {
-+		AR531X_REG ar531x_isr = sysRegRead(AR5315_ISR);
-+		AR531X_REG ar531x_imr = sysRegRead(AR5315_IMR);
-+		unsigned int ar531x_misc_intrs = ar531x_isr & ar531x_imr;
-+
-+             	if (ar531x_misc_intrs & ISR_TIMER)
-+                        		  do_IRQ(AR531X_MISC_IRQ_TIMER, regs);
-+		else if (ar531x_misc_intrs & ISR_AHB)
-+					  do_IRQ(AR531X_MISC_IRQ_AHB_PROC, regs);
-+		else if (ar531x_misc_intrs & ISR_GPIO)
-+                {
-+                    int i;
-+                    u32 gpioIntPending;
-+
-+                    gpioIntPending = sysRegRead(AR5315_GPIO_DI) & gpioIntMask;
-+                    for (i=0; i<AR531X_GPIO_IRQ_COUNT; i++) {
-+                        if (gpioIntPending & (1 << i))
-+                        		      do_IRQ(AR531X_GPIO_IRQ(i), regs);
-+                    }
-+                }
-+		else if (ar531x_misc_intrs & ISR_UART0) {
-+				do_IRQ(AR531X_MISC_IRQ_UART0, regs);
-+#if CONFIG_KGDB
-+                        if (kgdbInterrupt()) {
-+                                if (!user_mode(regs))
-+		                    set_async_breakpoint((unsigned long *)&regs->cp0_epc);
-+                        }
-+#endif 	/* CONFIG_KGDB */
-+                }
-+		else if (ar531x_misc_intrs & ISR_WD)
-+			do_IRQ(AR531X_MISC_IRQ_WATCHDOG, regs);
-+		else
-+			do_IRQ(AR531X_MISC_IRQ_NONE, regs);
-+	} else if (pending & CAUSEF_IP7) {
-+		do_IRQ(AR531X_IRQ_CPU_CLOCK, regs);
-+        }
-+	else {
-+		do_IRQ(AR531X_IRQ_NONE, regs);
-+        }
-+}
-+
-+#else
-+
-+void
-+ar531x_irq_dispatch(struct pt_regs *regs)
-+{
-+	int cause_intrs = regs->cp0_cause;
-+	int status_intrs = regs->cp0_status;
-+	int pending = cause_intrs & status_intrs;
-+
-+	if (pending & CAUSEF_IP2) {
-+		do_IRQ(AR531X_IRQ_WLAN0_INTRS, regs);
-+	}		
-+	else if (pending & CAUSEF_IP3) {
-+		do_IRQ(AR531X_IRQ_ENET0_INTRS, regs);
-+	}
-+	else if (pending & CAUSEF_IP4) {
-+		do_IRQ(AR531X_IRQ_ENET1_INTRS, regs);
-+	}
-+	else if (pending & CAUSEF_IP5) {
-+		do_IRQ(AR531X_IRQ_WLAN1_INTRS, regs);
-+	}
-+	else if (pending & CAUSEF_IP6) {
-+		AR531X_REG ar531x_isr = sysRegRead(AR531X_ISR);
-+		AR531X_REG ar531x_imr = sysRegRead(AR531X_IMR);
-+		unsigned int ar531x_misc_intrs = ar531x_isr & ar531x_imr;
-+
-+		if (ar531x_misc_intrs & AR531X_ISR_TIMER)
-+			do_IRQ(AR531X_MISC_IRQ_TIMER, regs);
-+		else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC)
-+			do_IRQ(AR531X_MISC_IRQ_AHB_PROC, regs);
-+		else if (ar531x_misc_intrs & AR531X_ISR_AHBDMA)
-+			do_IRQ(AR531X_MISC_IRQ_AHB_DMA, regs);
-+		else if (ar531x_misc_intrs & AR531X_ISR_GPIO)
-+                {
-+                    int i;
-+                    u32 gpioIntPending;
-+
-+                    gpioIntPending = sysRegRead(AR531X_GPIO_DI) & gpioIntMask;
-+                    for (i=0; i<AR531X_GPIO_IRQ_COUNT; i++) {
-+                        if (gpioIntPending & (1 << i))
-+                            do_IRQ(AR531X_GPIO_IRQ(i), regs);
-+                    }
-+                }
-+		else if ((ar531x_misc_intrs & AR531X_ISR_UART0) ||
-+		         (ar531x_misc_intrs & AR531X_ISR_UART0DMA)) {
-+			do_IRQ(AR531X_MISC_IRQ_UART0, regs);
-+#if CONFIG_KGDB
-+                        if (kgdbInterrupt()) {
-+                                if (!user_mode(regs))
-+		                    set_async_breakpoint((unsigned long *)&regs->cp0_epc);
-+                        }
-+#endif 	/* CONFIG_KGDB */
-+                }
-+		else if (ar531x_misc_intrs & AR531X_ISR_WD)
-+			do_IRQ(AR531X_MISC_IRQ_WATCHDOG, regs);
-+		else if (ar531x_misc_intrs & AR531X_ISR_LOCAL)
-+			do_IRQ(AR531X_MISC_IRQ_LOCAL, regs);
-+		else
-+			do_IRQ(AR531X_MISC_IRQ_NONE, regs);
-+	} else if (pending & CAUSEF_IP7) {
-+		do_IRQ(AR531X_IRQ_CPU_CLOCK, regs);
-+	} else
-+		do_IRQ(AR531X_IRQ_NONE, regs);
-+}
-+
-+#endif
-+
-+void __init init_IRQ(void)
-+{
-+	init_generic_irq();
-+	set_except_vector(0, ar531x_interrupt_receive);
-+
-+	/* Initialize interrupt controllers */
-+	mips_cpu_irq_init(MIPS_CPU_IRQ_BASE);
-+	ar531x_misc_intr_init(AR531X_MISC_IRQ_BASE);
-+        ar531x_gpio_intr_init(AR531X_GPIO_IRQ_BASE);
-+	setup_irq(AR531X_IRQ_MISC_INTRS, &cascade);
-+	/*
-+         * AR531X_IRQ_CPU_CLOCK is setup by ar531x_timer_setup.
-+         */
-+
-+	/* Default "spurious interrupt" handlers */
-+	setup_irq(AR531X_IRQ_NONE, &spurious_irq);
-+	setup_irq(AR531X_MISC_IRQ_NONE, &spurious_misc);
-+	setup_irq(AR531X_GPIO_IRQ_NONE, &spurious_gpio);
-+#ifndef CONFIG_AR5315
-+	setup_irq(AR531X_MISC_IRQ_TIMER, &ar531x_timer_interrupt);
-+#endif
-+	setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar531x_ahb_proc_interrupt);
-+        setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
-+
-+#ifdef CONFIG_KGDB
-+#if CONFIG_EARLY_STOP
-+        kgdbInit();
-+#endif
-+#endif
-+}
-diff -urN linux-mips/arch/mips/ar531x/ar531xksyms.c mips-linux-2.4.25/arch/mips/ar531x/ar531xksyms.c
---- linux-mips/arch/mips/ar531x/ar531xksyms.c	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/ar531xksyms.c	2005-12-30 17:26:31.001823800 +0000
-@@ -0,0 +1,17 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+#include <linux/module.h>
-+#include "asm/atheros/ar531xbsp.h"
-+
-+#ifdef CONFIG_KGDB
-+EXPORT_SYMBOL(kgdbInit);
-+EXPORT_SYMBOL(kgdbEnabled);
-+#endif
-+EXPORT_SYMBOL(ar531x_sys_frequency);
-+EXPORT_SYMBOL(get_system_type);
-diff -urN linux-mips/arch/mips/ar531x/ar531xlnx.h mips-linux-2.4.25/arch/mips/ar531x/ar531xlnx.h
---- linux-mips/arch/mips/ar531x/ar531xlnx.h	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/ar531xlnx.h	2005-12-30 17:26:31.001823800 +0000
-@@ -0,0 +1,135 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * This file contains definitions needed in order to compile
-+ * AR531X products for linux.  Definitions that are largely
-+ * AR531X-specific and independent of operating system belong
-+ * in ar531x.h rather than this file.
-+ */
-+#include "ar531x.h"
-+
-+#define MIPS_CPU_IRQ_BASE		0x00
-+#define AR531X_HIGH_PRIO                0x10
-+#define AR531X_MISC_IRQ_BASE		0x20
-+#define AR531X_GPIO_IRQ_BASE            0x30
-+
-+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
-+#if CONFIG_AR5315
-+#define AR531X_IRQ_NONE		MIPS_CPU_IRQ_BASE+0
-+#define AR531X_IRQ_MISC_INTRS	MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR531X_IRQ_WLAN0_INTRS	MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR531X_IRQ_ENET0_INTRS	MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR531X_IRQ_LCBUS_PCI	MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+#define AR531X_IRQ_WLAN0_POLL	MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+#define AR531X_IRQ_CPU_CLOCK	MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-+#else
-+#define AR531X_IRQ_NONE		MIPS_CPU_IRQ_BASE+0
-+#define AR531X_IRQ_WLAN0_INTRS	MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR531X_IRQ_ENET0_INTRS	MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR531X_IRQ_ENET1_INTRS	MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR531X_IRQ_WLAN1_INTRS	MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-+#define AR531X_IRQ_MISC_INTRS	MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+#define AR531X_IRQ_CPU_CLOCK	MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-+#endif
-+/* Miscellaneous interrupts, which share IP6 */
-+#define AR531X_MISC_IRQ_NONE		AR531X_MISC_IRQ_BASE+0
-+#define AR531X_MISC_IRQ_TIMER		AR531X_MISC_IRQ_BASE+1
-+#define AR531X_MISC_IRQ_AHB_PROC	AR531X_MISC_IRQ_BASE+2
-+#define AR531X_MISC_IRQ_AHB_DMA		AR531X_MISC_IRQ_BASE+3
-+#define AR531X_MISC_IRQ_GPIO		AR531X_MISC_IRQ_BASE+4
-+#define AR531X_MISC_IRQ_UART0		AR531X_MISC_IRQ_BASE+5
-+#define AR531X_MISC_IRQ_UART0_DMA	AR531X_MISC_IRQ_BASE+6
-+#define AR531X_MISC_IRQ_WATCHDOG	AR531X_MISC_IRQ_BASE+7
-+#define AR531X_MISC_IRQ_LOCAL		AR531X_MISC_IRQ_BASE+8
-+#define AR531X_MISC_IRQ_COUNT		9
-+
-+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
-+#define AR531X_GPIO_IRQ_NONE            AR531X_MISC_IRQ_BASE+0
-+#define AR531X_GPIO_IRQ(n)              AR531X_MISC_IRQ_BASE+(n)+1
-+#ifdef CONFIG_AR5315
-+#define AR531X_GPIO_IRQ_COUNT           2
-+#else
-+#define AR531X_GPIO_IRQ_COUNT           9
-+#endif
-+
-+#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr)
-+#define PHYS_TO_K0(physaddr) KSEG0ADDR(physaddr)
-+#define UNMAPPED_TO_PHYS(vaddr)  PHYSADDR(vaddr)
-+#define IS_UNMAPPED_VADDR(vaddr) \
-+    ((KSEGX(vaddr) == KSEG0) || (KSEGX(vaddr) == KSEG1))
-+
-+/* IOCTL commands for /proc/ar531x */
-+#define AR531X_CTRL_DO_BREAKPOINT       1
-+#define AR531X_CTRL_DO_MADWIFI          2
-+
-+/*
-+ * Definitions for operating system portability.
-+ * These are vxWorks-->Linux translations.
-+ */
-+#define LOCAL static
-+#define BOOL int
-+#define TRUE 1
-+#define FALSE 0
-+#define UINT8 u8
-+#define UINT16 u16
-+#define UINT32 u32
-+#define PRINTF printk
-+#if /* DEBUG */ 1
-+#define DEBUG_PRINTF printk
-+#define INLINE
-+#else
-+DEBUG_PRINTF while (0) printk
-+#define INLINE inline
-+#endif
-+#define sysUDelay(usecs) udelay(usecs)
-+#define sysMsDelay(msecs) mdelay(msecs)
-+typedef volatile UINT8 *VIRT_ADDR;
-+#define MALLOC(sz) kmalloc(sz, GFP_KERNEL)
-+#define MALLOC_NOSLEEP(sz) kmalloc(sz, GFP_ATOMIC)
-+#define FREE(ptr) kfree((void *)ptr)
-+#define BSP_BUG() do { printk("kernel BSP BUG at %s:%d!\n", __FILE__, __LINE__); *(int *)0=0; } while (0)
-+#define BSP_BUG_ON(condition) do { if (unlikely((condition)!=0)) BSP_BUG(); } while(0)
-+#define ASSERT(x) BSP_BUG_ON(!(x))
-+
-+extern struct ar531x_boarddata *ar531x_board_configuration;
-+extern char *ar531x_radio_configuration;
-+extern char *enet_mac_address_get(int MACUnit);
-+
-+extern void kgdbInit(void);
-+extern int kgdbEnabled(void);
-+extern void breakpoint(void);
-+extern int kgdbInterrupt(void);
-+extern unsigned int ar531x_cpu_frequency(void);
-+extern unsigned int ar531x_sys_frequency(void);
-+
-+/* GPIO support */
-+extern struct irqaction spurious_gpio;
-+extern unsigned int gpioIntMask;
-+extern void ar531x_gpio_intr_init(int irq_base);
-+extern void ar531x_gpio_ctrl_output(int gpio);
-+extern void ar531x_gpio_ctrl_input(int gpio);
-+extern void ar531x_gpio_set(int gpio, int val);
-+extern int  ar531x_gpio_get(int gpio);
-+extern void ar531x_gpio_intr_enable(unsigned int irq);
-+extern void ar531x_gpio_intr_disable(unsigned int irq);
-+
-+/* Watchdog Timer support */
-+extern int watchdog_start(unsigned int milliseconds);
-+extern int watchdog_stop(void);
-+extern int watchdog_is_enabled(void);
-+extern unsigned int watchdog_min_timer_reached(void);
-+extern void watchdog_notify_alive(void);
-+
-+#define A_DATA_CACHE_INVAL(start, length) \
-+        dma_cache_inv((UINT32)(start),(length))
-+
-+#define sysWbFlush() mb()
-+
-+#define intDisable(x) cli()
-+#define intEnable(x) sti()
-diff -urN linux-mips/arch/mips/ar531x/ar531xprom.c mips-linux-2.4.25/arch/mips/ar531x/ar531xprom.c
---- linux-mips/arch/mips/ar531x/ar531xprom.c	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/ar531xprom.c	2005-12-30 17:26:31.001823800 +0000
-@@ -0,0 +1,88 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright MontaVista Software Inc
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * Prom setup file for ar531x
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/bootinfo.h>
-+#include <asm/addrspace.h>
-+
-+#include "ar531xlnx.h"
-+
-+#define COMMAND_LINE_SIZE 512
-+
-+char arcs_cmdline[COMMAND_LINE_SIZE];
-+
-+void __init prom_init(int argc, char *argv[])
-+{
-+    int i;
-+    unsigned int memcfg1;
-+    int bank0AC, bank1AC;
-+    int memsz_in_mb;
-+    strcpy(arcs_cmdline, "console=ttyS0,9600");
-+    for (i=0; i<argc; i++) {
-+        strcat(arcs_cmdline, " ");
-+        strcat(arcs_cmdline, argv[i]);
-+    }
-+
-+    mips_machgroup = MACH_GROUP_AR531X;
-+#ifdef CONFIG_APUNUSED
-+    mips_machtype = MACH_ATHEROS_UNUSED;
-+#endif
-+#ifdef CONFIG_AP30
-+    mips_machtype = MACH_ATHEROS_AP30;
-+#endif
-+#ifdef CONFIG_AP33
-+    mips_machtype = MACH_ATHEROS_AP33;
-+#endif
-+#ifdef CONFIG_AP38
-+    mips_machtype = MACH_ATHEROS_AP38;
-+#endif
-+#ifdef CONFIG_AP43
-+    mips_machtype = MACH_ATHEROS_AP43;
-+#endif
-+#ifdef CONFIG_AP48
-+    mips_machtype = MACH_ATHEROS_AP48;
-+#endif
-+#ifdef CONFIG_PB32
-+    mips_machtype = MACH_ATHEROS_PB32;
-+#endif
-+
-+
-+    /* Determine SDRAM size based on Address Checks done at startup */
-+#if CONFIG_AR5315
-+    /* TO-DO : compute the SDRAM size */
-+    memsz_in_mb=8;
-+#else
-+    memcfg1 = sysRegRead(AR531X_MEM_CFG1);
-+    bank0AC = (memcfg1 & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
-+    bank1AC = (memcfg1 & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
-+    memsz_in_mb = (bank0AC ? (1 << (bank0AC+1)) : 0)
-+                + (bank1AC ? (1 << (bank1AC+1)) : 0);
-+#endif
-+
-+    /*
-+     * By default, use all available memory.  You can override this
-+     * to use, say, 8MB by specifying "mem=8M" as an argument on the
-+     * linux bootup command line.
-+     */
-+    add_memory_region(0, memsz_in_mb << 20, BOOT_MEM_RAM);
-+}
-+
-+void __init prom_free_prom_memory(void)
-+{
-+}
-diff -urN linux-mips/arch/mips/ar531x/ar531xsetup.c mips-linux-2.4.25/arch/mips/ar531x/ar531xsetup.c
---- linux-mips/arch/mips/ar531x/ar531xsetup.c	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/ar531xsetup.c	2005-12-30 17:26:31.002823648 +0000
-@@ -0,0 +1,406 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * Initialization for ar531x SOC.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/serial.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+
-+#include <asm/reboot.h>
-+#include <asm/io.h>
-+#include <asm/time.h>
-+#include <asm/pgtable.h>
-+#include <asm/processor.h>
-+#include <asm/reboot.h>
-+#include <asm/system.h>
-+#include <asm/serial.h>
-+
-+#include "ar531xlnx.h"
-+
-+void
-+ar531x_restart(char *command)
-+{
-+    for(;;) {
-+#if CONFIG_AR5315
-+    /* 
-+    ** Cold reset does not work,work around is to use the GPIO reset bit.  
-+    */
-+    unsigned int reg;
-+    reg = sysRegRead(AR5315_GPIO_DO);
-+    reg &= ~(1 << AR5315_RESET_GPIO);
-+    sysRegWrite(AR5315_GPIO_DO, reg);
-+    (void)sysRegRead(AR5315_GPIO_DO); /* flush write to hardware */
-+      
-+#else
-+        sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM);
-+#endif
-+    }
-+}
-+
-+void
-+ar531x_halt(void)
-+{
-+        printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-+        while (1);
-+}
-+
-+void
-+ar531x_power_off(void)
-+{
-+        ar531x_halt();
-+}
-+
-+const char *
-+get_system_type(void)
-+{
-+#if CONFIG_AR5315
-+	return "Atheros AR5315";
-+#else
-+	return "Atheros AR531X";
-+#endif
-+}
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int CLOCKCTL1_PREDIVIDE_TABLE[4] = {
-+    1,
-+    2,
-+    4,
-+    5
-+};
-+
-+#if CONFIG_AR5315
-+static int PLLC_DIVIDE_TABLE[5] = {
-+    2,
-+    3,
-+    4,
-+    6,
-+    3
-+};
-+
-+unsigned int
-+ar531x_cpu_frequency(void)
-+{
-+    static unsigned int ar531x_calculated_cpu_freq=0;
-+    unsigned int clockCtl,pllcCtrl,cpuDiv;
-+    unsigned int pllcOut,refdiv,fdiv,divby2;
-+
-+    if(ar531x_calculated_cpu_freq) 
-+         return ar531x_calculated_cpu_freq; 
-+
-+    
-+    pllcCtrl = sysRegRead(AR5315_PLLC_CTL);
-+    refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
-+    refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
-+    fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
-+    divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
-+    divby2 += 1;
-+    pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
-+
-+    clockCtl = sysRegRead(AR5315_CPUCLK);
-+
-+    /* clkm input selected */
-+    if((clockCtl & CPUCLK_CLK_SEL_M) == 0  || (clockCtl & CPUCLK_CLK_SEL_M) == 1 ) {
-+       unsigned int clkMdiv;
-+       clkMdiv = (pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S;
-+       clkMdiv = PLLC_DIVIDE_TABLE[clkMdiv];
-+
-+       cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;  
-+       if(cpuDiv)  cpuDiv *= 2;
-+       else cpuDiv=1;
-+
-+       ar531x_calculated_cpu_freq= (pllcOut/(clkMdiv * cpuDiv)) ;
-+        
-+       return ar531x_calculated_cpu_freq; 
-+    } 
-+    
-+    /* clkc input selected */
-+    if((clockCtl & CPUCLK_CLK_SEL_M) == 2 ) {
-+       unsigned int clkCdiv;
-+       clkCdiv = (pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S;
-+       clkCdiv = PLLC_DIVIDE_TABLE[clkCdiv];
-+
-+       cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;  
-+       if(cpuDiv)  cpuDiv *= 2;
-+       else cpuDiv=1;
-+
-+       ar531x_calculated_cpu_freq= (pllcOut/(clkCdiv * cpuDiv)) ;
-+        
-+       return ar531x_calculated_cpu_freq; 
-+    } else {   /* ref_clk  selected */
-+
-+       cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;  
-+       if(cpuDiv)  cpuDiv *= 2;
-+       else cpuDiv=1;
-+
-+       ar531x_calculated_cpu_freq= (40000000/(cpuDiv)) ;
-+       return ar531x_calculated_cpu_freq; 
-+    }
-+}
-+
-+unsigned int
-+ar531x_apb_frequency(void)
-+{
-+    static unsigned int ar531x_calculated_cpu_freq=0;
-+    unsigned int clockCtl,pllcCtrl,cpuDiv;
-+    unsigned int pllcOut,refdiv,fdiv,divby2;
-+
-+    if(ar531x_calculated_cpu_freq) 
-+         return ar531x_calculated_cpu_freq; 
-+
-+    
-+    pllcCtrl = sysRegRead(AR5315_PLLC_CTL);
-+    refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
-+    refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
-+    fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
-+    divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
-+    divby2 += 1;
-+    pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
-+
-+    clockCtl = sysRegRead(AR5315_AMBACLK);
-+
-+    /* clkm input selected */
-+    if((clockCtl & CPUCLK_CLK_SEL_M) == 0  || (clockCtl & CPUCLK_CLK_SEL_M) == 1 ) {
-+       unsigned int clkMdiv;
-+       clkMdiv = (pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S;
-+       clkMdiv = PLLC_DIVIDE_TABLE[clkMdiv];
-+
-+       cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;  
-+       if(cpuDiv)  cpuDiv *= 2;
-+       else cpuDiv=1;
-+
-+       ar531x_calculated_cpu_freq= (pllcOut/(clkMdiv * cpuDiv)) ;
-+        
-+       return ar531x_calculated_cpu_freq; 
-+    } 
-+    
-+    /* clkc input selected */
-+    if((clockCtl & CPUCLK_CLK_SEL_M) == 2 ) {
-+       unsigned int clkCdiv;
-+       clkCdiv = (pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S;
-+       clkCdiv = PLLC_DIVIDE_TABLE[clkCdiv];
-+
-+       cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;  
-+       if(cpuDiv)  cpuDiv *= 2;
-+       else cpuDiv=1;
-+
-+       ar531x_calculated_cpu_freq= (pllcOut/(clkCdiv * cpuDiv)) ;
-+        
-+       return ar531x_calculated_cpu_freq; 
-+    } else {   /* ref_clk  selected */
-+
-+       cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;  
-+       if(cpuDiv)  cpuDiv *= 2;
-+       else cpuDiv=1;
-+
-+       ar531x_calculated_cpu_freq= (40000000/(cpuDiv)) ;
-+       return ar531x_calculated_cpu_freq; 
-+    }
-+}
-+
-+#else
-+unsigned int
-+ar531x_cpu_frequency(void)
-+{
-+	static unsigned int ar531x_calculated_cpu_freq;
-+        unsigned int clockctl1_predivide_mask;
-+        unsigned int clockctl1_predivide_shift;
-+        unsigned int clockctl1_multiplier_mask;
-+        unsigned int clockctl1_multiplier_shift;
-+        unsigned int clockctl1_doubler_mask;
-+        int wisoc_revision;
-+
-+        /*
-+         * Trust the bootrom's idea of cpu frequency.
-+         */
-+        ar531x_calculated_cpu_freq = sysRegRead(AR5312_SCRATCH);
-+        if (ar531x_calculated_cpu_freq)
-+	    return ar531x_calculated_cpu_freq;
-+
-+        wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S;
-+
-+        if (wisoc_revision == AR531X_REV_MAJ_AR2313) {
-+            clockctl1_predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
-+            clockctl1_predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
-+            clockctl1_multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
-+            clockctl1_multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
-+            clockctl1_doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
-+        } else { /* AR5312 and AR2312 */
-+            clockctl1_predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
-+            clockctl1_predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
-+            clockctl1_multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
-+            clockctl1_multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
-+            clockctl1_doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
-+        }
-+
-+        /*
-+         * Clocking is derived from a fixed 40MHz input clock.
-+         *  cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
-+         *
-+         *  sysFreq = cpuFreq / 4       (used for APB clock, serial,
-+         *                               flash, Timer, Watchdog Timer)
-+         *
-+         *  cntFreq = cpuFreq / 2       (use for CPU count/compare)
-+         *
-+         * So, for example, with a PLL multiplier of 5, we have
-+         *  cpuFrez = 200MHz
-+         *  sysFreq = 50MHz
-+         *  cntFreq = 100MHz
-+         *
-+         * We compute the CPU frequency, based on PLL settings.
-+         */
-+	if (ar531x_calculated_cpu_freq == 0) {
-+            unsigned int clockCtl1 = sysRegRead(AR5312_CLOCKCTL1);
-+
-+            int preDivideSelect = (clockCtl1 & clockctl1_predivide_mask) >>
-+                                   clockctl1_predivide_shift;
-+
-+            int preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
-+
-+            int multiplier = (clockCtl1 & clockctl1_multiplier_mask) >>
-+                              clockctl1_multiplier_shift;
-+
-+            if (clockCtl1 & clockctl1_doubler_mask) {
-+                multiplier = multiplier << 1;
-+            }
-+
-+            ar531x_calculated_cpu_freq = (40000000 / preDivisor) * multiplier;
-+        }
-+
-+	return ar531x_calculated_cpu_freq;
-+}
-+#endif
-+
-+unsigned int
-+ar531x_sys_frequency(void)
-+{
-+	static unsigned int ar531x_calculated_sys_freq = 0;
-+
-+	if (ar531x_calculated_sys_freq == 0) {
-+		ar531x_calculated_sys_freq = ar531x_cpu_frequency() / 4;
-+	}
-+
-+	return ar531x_calculated_sys_freq;
-+}
-+
-+static void __init
-+flash_setup(void)
-+{
-+    UINT32 flash_ctl;
-+#ifndef CONFIG_AR5315
-+    /* Configure flash bank 0 */
-+    flash_ctl = FLASHCTL_E |
-+                FLASHCTL_AC_8M |
-+                FLASHCTL_RBLE |
-+                (0x01 << FLASHCTL_IDCY_S) |
-+                (0x07 << FLASHCTL_WST1_S) |
-+                (0x07 << FLASHCTL_WST2_S) |
-+                (sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW);
-+
-+    sysRegWrite(AR531X_FLASHCTL0, flash_ctl);
-+
-+    /* Disable other flash banks */
-+    sysRegWrite(AR531X_FLASHCTL1,
-+                sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+    sysRegWrite(AR531X_FLASHCTL2,
-+                sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
-+#endif
-+}
-+
-+
-+
-+void __init
-+serial_setup(void)
-+{
-+	struct serial_struct s;
-+
-+	memset(&s, 0, sizeof(s));
-+
-+	s.flags = STD_COM_FLAGS;
-+	s.io_type = SERIAL_IO_MEM;
-+#if CONFIG_AR5315
-+	s.baud_base = ar531x_apb_frequency()/16;
-+#else
-+	s.baud_base = ar531x_sys_frequency()/16;
-+#endif
-+	s.irq = AR531X_MISC_IRQ_UART0;
-+	s.iomem_reg_shift = 2;
-+#if CONFIG_AR5315
-+	s.iomem_base = (u8 *)AR5315_UART0;
-+#else
-+	s.iomem_base = (u8 *)AR531X_UART0;
-+#endif
-+
-+	if (early_serial_setup(&s) != 0)
-+		printk(KERN_ERR "early_serial_setup failed\n");
-+}
-+
-+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-+static void __init
-+ar531x_timer_setup(struct irqaction *irq)
-+{
-+        unsigned int count;
-+
-+	/* Usually irq is timer_irqaction (timer_interrupt) */
-+      	setup_irq(AR531X_IRQ_CPU_CLOCK, irq);
-+
-+        /* to generate the first CPU timer interrupt */
-+        count = read_c0_count();
-+        write_c0_compare(count + 1000);
-+}
-+
-+extern void (*board_time_init)(void);
-+
-+static void __init
-+ar531x_time_init(void)
-+{
-+	mips_hpt_frequency = ar531x_cpu_frequency() / 2;
-+}
-+
-+void __init
-+ar531x_setup(void)
-+{
-+	/* Clear any lingering AHB errors */
-+#if CONFIG_AR5315
-+	unsigned int config = read_c0_config();
-+	write_c0_config(config & ~0x3);
-+	sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
-+	sysRegRead(AR5315_AHB_ERR1);
-+	sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION);
-+#else
-+	sysRegRead(AR531X_PROCADDR);
-+	sysRegRead(AR531X_DMAADDR);
-+
-+	sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
-+
-+#endif
-+
-+        /* Disable data watchpoints */
-+        write_c0_watchlo0(0);
-+
-+	board_time_init = ar531x_time_init;
-+        board_timer_setup = ar531x_timer_setup;
-+
-+        _machine_restart = ar531x_restart;
-+        _machine_halt = ar531x_halt;
-+        _machine_power_off = ar531x_power_off;
-+
-+        flash_setup();
-+        serial_setup();
-+}
-diff -urN linux-mips/arch/mips/ar531x/Makefile mips-linux-2.4.25/arch/mips/ar531x/Makefile
---- linux-mips/arch/mips/ar531x/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/Makefile	2005-12-30 17:26:29.912989328 +0000
-@@ -0,0 +1,33 @@
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License.  See the file "COPYING" in the main directory of this archive
-+# for more details.
-+#
-+# Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+#
-+
-+# Makefile for Atheros ar531x boards
-+#
-+# Note! Dependencies are done automagically by 'make dep', which also
-+# removes any old dependencies. DON'T put your own dependencies here
-+# unless it's something special (ie not a .c file).
-+#
-+
-+.S.s:
-+	$(CPP) $(CFLAGS) $< -o $*.s
-+.S.o:
-+	$(CC) $(CFLAGS) -D__ASSEMBLY__ -c $< -o $*.o
-+
-+O_TARGET:= ar531x.o
-+
-+export-objs = ar531xksyms.o
-+
-+obj-y    := ar531xdbg_io.o	\
-+	ar531xsetup.o	\
-+	ar531xprom.o	\
-+	ar531xirq.o	\
-+	ar531xintr.o	\
-+	ar531xgpio.o	\
-+	ar531xksyms.o
-+
-+include $(TOPDIR)/Rules.make
-diff -urN linux-mips/arch/mips/ar531x/README mips-linux-2.4.25/arch/mips/ar531x/README
---- linux-mips/arch/mips/ar531x/README	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/README	2005-12-30 17:26:30.478903296 +0000
-@@ -0,0 +1,68 @@
-+Basic information for the AR531X Board Support Package
-+
-+This directory contains the "LBSP" -- Linux Board Support Package --
-+for Linux on the Atheros AR531X Wireless System-On-a-Chip.  It is intended
-+primarily as a building block for wireless products.  At this time, the
-+AR531X Linux BSP is experimental code, and is actively UNDER CONSTRUCTION.
-+
-+Some components that are supported by this LBSP along with a standard 2.4
-+Linux MIPS kernel include
-+  R4Kc CPU
-+  instruction and data caches
-+  SDRAM
-+  flash (Macronix, AMD, STS, etc.)
-+  16550 serial port
-+  ethernet MACs
-+  ethernet PHY or PHY Switch (RealTek, Kendin, Marvell)
-+  General-Purpose I/O pins
-+  kernel debugging with kgdb
-+
-+This LBSP code does NOT include drivers for the wireless components of the
-+chip/boards!  Drivers for those components may be distributed separately.
-+In particular, the MADWiFi project under SourceForge supports (not yet!)
-+wireless functions on the AR531X chipset.  See
-+   http://www.sourceforge.net/projects/madwifi
-+
-+Files included in this BSP:
-+ae531xlnx.c      - Linux-specific portions of the ethernet driver
-+ae531xmac.c      - OS-independent AR531X ethernet MAC code
-+ae531xmac.h      - OS-independent AR531X ethernet MAC software definitions
-+ae531xreg.h      - OS-independent AR531X ethernet MAC hardware definitions
-+ar531x.h         - OS-independent AR531X system hardware definitions
-+ar531xlnx.h      - Linux-specific AR531X system definitions and externs
-+defconfig-ar531x - Default Linux configuration file
-+intr_recv.S      - Linux interrupt "glue" code
-+ar531xirq.c      - Linux Interrupt Request management
-+Makefile         - Linux makefile
-+mvPhy.c          - OS-independent ethernet PHY code for Marvell Switch
-+mvPhy.h          - OS-independent ethernet PHY definitions for Marvell Switch
-+ar531xprom.c     - Linux prom "glue" code
-+ar531xsetup.c    - Linux startup code
-+ar531xdbg_io.c   - Support for kgdb-based debugging and for EARLY_PRINTK_HACK
-+ar531xproc.c     - Pseudo-device driver for /proc/ar531x device
-+ar531xgpio.c     - Support for General Purpose I/O pins
-+ar531xwmacsl.c   - Wireless MAC Support Layer
-+
-+Additional files, distributed with the BSP:
-+README           - This file
-+README.BUILD     - Instructions for building a linux kernel from source
-+README.EXECUTE   - Instructions for testing your linux kernel
-+README.RAMDISK   - Instructions for building a root ramdisk image
-+
-+ramdisk.gz       - A binary ramdisk image, suitable for use with AR531X.
-+DIFFS            - Directory that contains "patch" files (See README.BUILD)
-+
-+
-+There are several ways to boot a vmlinux image on an AR531X board:
-+  -You can boot in over ethernet from the vxWorks bootrom, which is preloaded
-+   on all Atheros boards
-+  -You can use an ICE (e.g. VisionICE) to load the vmlinux image.  You will
-+   need appropriate register initialization (e.g. AP30.ini file)
-+  -You can use the eCos RedBoot bootrom loader.  This is a full-featured
-+   bootrom which as been ported to AR531x.  It can boot vmlinux over ethernet
-+   or from flash.  Source code is available from Atheros.
-+
-+Please send comments, corrections, complaints, criticisms, suggestions,
-+enhancements, requests, or any other reasonable communications regarding
-+this effort, to "linux@atheros.com".  Your email will be received by a
-+couple of engineers, and redirected as appropriate.
-diff -urN linux-mips/arch/mips/ar531x/README.BUILD mips-linux-2.4.25/arch/mips/ar531x/README.BUILD
---- linux-mips/arch/mips/ar531x/README.BUILD	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/README.BUILD	2005-12-30 17:26:30.478903296 +0000
-@@ -0,0 +1,47 @@
-+       How to BUILD a linux kernel for an AR531X system
-+
-+It is expected that you will build Linux on an existing Linux system, which 
-+has all of the standard Linux tools.
-+
-+01) Obtain a MIPS BigEndian ELF gcc-compatible toolchain.  For example,
-+    if you're cross-compiling on a x86 Linux system, you could use:
-+    ftp://ftp.mips.com/pub/tools/software/sde-for-linux/sdelinux-5.01-4eb.i386.rpm
-+
-+02) Obtain the latest working MIPS Linux kernel
-+    cvs -d :pserver:cvs@ftp.linux-mips.org:/home/cvs login    (password "cvs")
-+    cvs -d :pserver:cvs@ftp.linux-mips.org:/home/cvs co -r linux_2_4 linux
-+
-+    Now "cd linux".  The remainder of these instructions assume
-+    that you are in the linux directory.
-+
-+03) Place the contents of this directory at arch/mips/ar531x.
-+
-+04) Use the patch command to patch generic linux files according
-+    to the DIFFS directory
-+    for i in arch/mips/ar531x/DIFFS/*.diff
-+    do
-+       patch -p1 < $i
-+    done
-+    NOTE: This version of the AR531X Linux BSP was tested with
-+    MIPS Linux 2.4.22 as of 11/14/03.  If you use a different
-+    (e.g. more recent) version of Linux source, you may need to
-+    resolve some minor patch and compilation issues.
-+
-+05) Set up a RAMDISK image.
-+    See the instructions in README.RAMDISK.
-+
-+06) Set up a linux configuration using ar531x/defconfig-ar531x.
-+    cp arch/mips/ar531x/defconfig-ar531x .config
-+    make oldconfig       (answer all questions that are asked)
-+    NOTE: For development/debug purposes, you may want to
-+    enable CONFIG_RUNTIME_DEBUG and CONFIG_KGDB.
-+
-+07) Make dependencies.
-+    make dep
-+
-+08) Build the linux kernel
-+    make
-+
-+09) The linux image you just built is in vmlinux.
-+    See instructions in README.EXECUTE to run your vmlinux
-+    image on an AP531X-based board.
-diff -urN linux-mips/arch/mips/ar531x/README.EXECUTE mips-linux-2.4.25/arch/mips/ar531x/README.EXECUTE
---- linux-mips/arch/mips/ar531x/README.EXECUTE	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/README.EXECUTE	2005-12-30 17:26:30.479903144 +0000
-@@ -0,0 +1,23 @@
-+      How to EXECUTE a linux image on an AR531X system
-+
-+There are currently three ways to run you vmlinux image:
-+  1) Load it using the vxWorks bootrom that is supplied with the board.
-+     You can load it over ethernet or from the TFFS file system, if you
-+     have sufficient flash to store the image.
-+  2) Load it using an ICE (e.g. VisionICE).
-+  3) Use a bootrom loader, such as eCos RedBoot.
-+
-+After you have booted linux:
-+  By default, the root filesystem on ramdisk is read-only.
-+  To make it writable, use "mount -o remount w /".
-+
-+  The user-level commands are slightly non-standard, as they
-+  are based on "busybox".
-+
-+  The "wget" command is included.  You can use wget to fetch
-+  files from any ftp server.  So, for instance, you can fetch
-+  a kernel module and then "insmod" it.
-+
-+Note that the standard source-level kernel debugger, kgdb, works well
-+over the serial line with this port.  We use kgdb and the kgdb_demux perl
-+script -- available over the www -- for debugging.
-diff -urN linux-mips/arch/mips/ar531x/README.VERSION mips-linux-2.4.25/arch/mips/ar531x/README.VERSION
---- linux-mips/arch/mips/ar531x/README.VERSION	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/arch/mips/ar531x/README.VERSION	2005-12-30 17:26:30.479903144 +0000
-@@ -0,0 +1 @@
-+Source release last modified: 12/16/03
-diff -urN linux-mips/arch/mips/config-shared.in mips-linux-2.4.25/arch/mips/config-shared.in
---- linux-mips/arch/mips/config-shared.in	2005-12-24 15:11:15.963885864 +0000
-+++ mips-linux-2.4.25/arch/mips/config-shared.in	2005-12-30 17:26:31.611731080 +0000
-@@ -34,6 +34,7 @@
- dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy PB1200 board' CONFIG_MIPS_PB1200 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32
-+dep_bool 'Support for Atheros AR5312/AR2312 WiSoC (EXPERIMENTAL)' CONFIG_AR531X $CONFIG_AR531X $CONFIG_EXPERIMENTAL
- dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32
- dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32
- dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32
-@@ -238,6 +239,63 @@
-    define_bool CONFIG_PC_KEYB y
-    define_bool CONFIG_OLD_TIME_C y
- fi
-+if [ "$CONFIG_AR531X" = "y" ]; then
-+   define_bool CONFIG_IRQ_CPU y
-+   define_bool CONFIG_CPU_R4X00 y
-+   define_bool CONFIG_SERIAL y
-+   define_bool CONFIG_NEW_IRQ y
-+   define_bool CONFIG_NEW_TIME_C y
-+   define_bool CONFIG_AR5312
-+   define_bool CONFIG_NONCOHERENT_IO y
-+   bool 'Enable early printk hack' CONFIG_EARLY_PRINTK_HACK
-+   define_bool CONFIG_SCSI n
-+   mainmenu_option next_comment
-+   comment 'Board selection'
-+      choice 'Board type' \
-+         "UNKNOWN CONFIG_APUNKNOWN \
-+	  AP30 CONFIG_AP30 \
-+          AP31 CONFIG_AP31 \
-+	  AP33 CONFIG_AP33 \
-+    	  AP38 CONFIG_AP38 \
-+	  AP43 CONFIG_AP43 \
-+	  AP48 CONFIG_AP48 \
-+	  AP51 CONFIG_AP51 \
-+          AP30-ASK CONFIG_AP30ASK" AP30
-+   if [ "$CONFIG_AP30" = "y" -o "$CONFIG_AP30ASK" = "y" ]; then
-+	define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 2
-+   fi
-+   if [ "$CONFIG_AP33" = "y" ]; then
-+	define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
-+   fi
-+   if [ "$CONFIG_AP38" = "y" ]; then
-+	define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
-+   fi
-+   if [ "$CONFIG_AP43" = "y" ]; then
-+	define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
-+   fi
-+   if [ "$CONFIG_AP48" = "y" ]; then
-+	define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
-+   fi
-+   if [ "$CONFIG_AP51" = "y" ]; then
-+	define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
-+	define_bool CONFIG_MTD_REDBOOT_PARTS y
-+	define_bool CONFIG_AR5315 y
-+	define_bool CONFIG_MTD_SPIFLASH y
-+	define_bool CONFIG_MTD_CFI n
-+	define_bool CONFIG_MTD_JEDECPROBE n
-+	define_bool CONFIG_MTD_CFI_INTELEXT n
-+	define_bool CONFIG_MTD_CFI_AMDSTD n
-+	define_bool CONFIG_MTD_OBSOLETE_CHIPS n
-+	define_bool CONFIG_MTD_AMDSTD n
-+	define_bool CONFIG_MTD_JEDEC n
-+	define_bool CONFIG_MTD_PHYSMAP n
-+   fi
-+   mainmenu_option next_comment
-+   comment 'Flash Selection'
-+      choice 'Flash Size' \
-+         "2MB  CONFIG_FLASH_2MB \
-+          4MB  CONFIG_FLASH_4MB" 2MB
-+fi
- if [ "$CONFIG_CASIO_E55" = "y" ]; then
-    define_bool CONFIG_IRQ_CPU y
-    define_bool CONFIG_NEW_TIME_C y
-
-diff -urN linux-mips/arch/mips/kernel/setup.c mips-linux-2.4.25/arch/mips/kernel/setup.c
---- linux-mips/arch/mips/kernel/setup.c	2005-12-24 15:11:16.188851664 +0000
-+++ mips-linux-2.4.25/arch/mips/kernel/setup.c	2005-12-30 17:26:33.536438480 +0000
-@@ -496,6 +496,7 @@
- 	void hp_setup(void);
- 	void au1x00_setup(void);
- 	void frame_info_init(void);
-+	void ar531x_setup(void);
- 
- 	frame_info_init();
- #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
-@@ -693,6 +694,12 @@
-                 pmc_yosemite_setup();
-                 break;
- #endif
-+
-+#ifdef CONFIG_AR531X
-+	case MACH_GROUP_AR531X:
-+		ar531x_setup();
-+		break;
-+#endif
- 	default:
- 		panic("Unsupported architecture");
- 	}
-diff -urN linux-mips/arch/mips/Makefile mips-linux-2.4.25/arch/mips/Makefile
---- linux-mips/arch/mips/Makefile	2005-12-24 15:11:15.903894984 +0000
-+++ mips-linux-2.4.25/arch/mips/Makefile	2005-12-30 17:26:29.911989480 +0000
-@@ -701,6 +701,17 @@
- LOADADDR      += 0x80020000
- endif
- 
-+ifdef CONFIG_AR531X
-+SUBDIRS       += arch/mips/ar531x
-+LIBS          += arch/mips/ar531x/ar531x.o
-+ifdef CONFIG_AP51
-+LOADADDR      += 0x80041000
-+else
-+LOADADDR      += 0x80002000
-+endif
-+
-+endif
-+
- #
- # Choosing incompatible machines durings configuration will result in
- # error messages during linking.  Select a default linkscript if
-diff -urN linux-mips/ath_version.mk mips-linux-2.4.25/ath_version.mk
---- linux-mips/ath_version.mk	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/ath_version.mk	2005-12-30 17:27:00.579327336 +0000
-@@ -0,0 +1 @@
-+EXTRAVERSION=-LSDK-5.0.0-RC5
-diff -urN linux-mips/drivers/char/serial.c mips-linux-2.4.25/drivers/char/serial.c
---- linux-mips/drivers/char/serial.c	2005-12-24 15:11:21.796999096 +0000
-+++ mips-linux-2.4.25/drivers/char/serial.c	2005-12-30 17:27:10.815771160 +0000
-@@ -3441,7 +3441,7 @@
- 
- static _INLINE_ void show_serial_version(void)
- {
-- 	printk(KERN_INFO "%s version %s%s (%s) with%s", serial_name,
-+ 	printk(KERN_INFO "%s version %s%s (%s) with%s\n", serial_name,
- 	       serial_version, LOCAL_VERSTRING, serial_revdate,
- 	       serial_options);
- }
-@@ -5567,7 +5567,7 @@
- 			printk(KERN_INFO"ttyS%02d%s at 0x%p (irq = %d) is a %s\n",
- 	 		       state->line + SERIAL_DEV_OFFSET,
- 			       (state->flags & ASYNC_FOURPORT) ? " FourPort" : "",
--			       state->iomem_base, state->irq,
-+			       (void *)state->iomem_base, state->irq,
- 			       uart_config[state->type].name);
- 		}
- 		else {
-diff -urN linux-mips/drivers/mtd/chips/cfi_cmdset_0002.c mips-linux-2.4.25/drivers/mtd/chips/cfi_cmdset_0002.c
---- linux-mips/drivers/mtd/chips/cfi_cmdset_0002.c	2005-12-24 15:11:25.102496584 +0000
-+++ mips-linux-2.4.25/drivers/mtd/chips/cfi_cmdset_0002.c	2005-12-30 17:27:21.333172272 +0000
-@@ -511,7 +511,7 @@
- 	   or tells us why it failed. */        
- 	dq6 = CMD(1<<6);
- 	dq5 = CMD(1<<5);
--	timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */
-+	timeo = jiffies + (HZ/1000) + 1; /* setting timeout to 1ms for now */
- 		
- 	oldstatus = cfi_read(map, adr);
- 	status = cfi_read(map, adr);
-@@ -536,16 +536,18 @@
- 		if( (status & dq5) == dq5 ) {
- 			/* When DQ5 raises, we must check once again
- 			   if DQ6 is toggling.  If not, the erase has been
--			   completed OK.  If not, reset chip. */
-+			   completed OK.  But if so, reset chip. */
- 			oldstatus = cfi_read(map, adr);
- 			status = cfi_read(map, adr);
- 		    
- 			if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) {
-+#if 0
- 				printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" );
-+#endif	
- 			} else { 
- 				/* DQ5 is active so we can do a reset and stop the erase */
- 				cfi_write(map, CMD(0xF0), chip->start);
--				printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" );
-+				printk(KERN_WARNING "Internal flash device timeout pt A occurred or write operation was performed while flash was programming.  timeout=%d\n",chip->word_write_time );
- 			}
- 		} else {
- 			printk(KERN_WARNING "Waiting for write to complete timed out in do_write_oneword.");        
-@@ -959,7 +961,7 @@
-             {
- 			    /* DQ5 is active so we can do a reset and stop the erase */
- 				cfi_write(map, CMD(0xF0), chip->start);
--                printk( KERN_WARNING "Internal flash device timeout occured or write operation was performed while flash was erasing\n" );
-+                printk( KERN_WARNING "Internal flash device timeout pt B occured or write operation was performed while flash was erasing\n" );
- 			}
- 		}
-         else
-diff -urN linux-mips/drivers/mtd/chips/cfi_probe.c mips-linux-2.4.25/drivers/mtd/chips/cfi_probe.c
---- linux-mips/drivers/mtd/chips/cfi_probe.c	2005-12-24 15:11:25.103496432 +0000
-+++ mips-linux-2.4.25/drivers/mtd/chips/cfi_probe.c	2005-12-30 17:27:21.507145824 +0000
-@@ -51,7 +51,7 @@
- 			  struct flchip *chips, struct cfi_private *cfi)
- {
- 	int i;
--	
-+
- 	if ((base + 0) >= map->size) {
- 		printk(KERN_NOTICE
- 			"Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx)\n",
-@@ -221,12 +221,10 @@
- 
- static void print_cfi_ident(struct cfi_ident *cfip)
- {
--#if 0
- 	if (cfip->qry[0] != 'Q' || cfip->qry[1] != 'R' || cfip->qry[2] != 'Y') {
- 		printk("Invalid CFI ident structure.\n");
- 		return;
- 	}	
--#endif		
- 	printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID));
- 	if (cfip->P_ADR)
- 		printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR);
-diff -urN linux-mips/drivers/mtd/chips/jedec_probe.c mips-linux-2.4.25/drivers/mtd/chips/jedec_probe.c
---- linux-mips/drivers/mtd/chips/jedec_probe.c	2005-12-24 15:11:25.126492936 +0000
-+++ mips-linux-2.4.25/drivers/mtd/chips/jedec_probe.c	2005-12-30 17:27:21.532142024 +0000
-@@ -104,6 +104,7 @@
- #define SST29LE512	0x003d
- #define SST39LF800	0x2781
- #define SST39LF160	0x2782
-+#define SST39LF1601	0x234b
- #define SST39LF512	0x00D4
- #define SST39LF010	0x00D5
- #define SST39LF020	0x00D6
-@@ -113,6 +114,8 @@
- #define SST49LF030A	0x001C
- #define SST49LF040A	0x0051
- #define SST49LF080A	0x005B
-+#define SST39VF3201     0x235B
-+#define SST39VF3202     0x235A
- 
- /* Toshiba */
- #define TC58FVT160	0x00C2
-@@ -900,7 +903,43 @@
- 		NumEraseRegions: 1,
- 		regions: {ERASEINFO(0x01000,256),
- 		}
--	} 
-+	}, {
-+		mfr_id: MANUFACTURER_SST,
-+		dev_id: SST39LF160,
-+		name: "SST 39LF160",
-+		DevSize: SIZE_2MiB,
-+		CmdSet: P_ID_AMD_STD,
-+		NumEraseRegions: 1,
-+		regions: {ERASEINFO(0x01000,512),
-+		}
-+        }, {
-+		mfr_id: MANUFACTURER_SST,
-+		dev_id: SST39LF1601,
-+		name: "SST 39LF1601",
-+		DevSize: SIZE_2MiB,
-+		CmdSet: P_ID_AMD_STD,
-+		NumEraseRegions: 1,
-+		regions: {ERASEINFO(0x01000,512),
-+		}
-+        }, {
-+		mfr_id: MANUFACTURER_SST,
-+		dev_id: SST39VF3201,
-+		name: "SST 39VF3201",
-+		DevSize: SIZE_4MiB,
-+		CmdSet: P_ID_AMD_STD,
-+		NumEraseRegions: 1,
-+		regions: {ERASEINFO(0x01000,1024),
-+		}
-+        }, {
-+		mfr_id: MANUFACTURER_SST,
-+		dev_id: SST39VF3202,
-+		name: "SST 39VF3202",
-+		DevSize: SIZE_4MiB,
-+		CmdSet: P_ID_AMD_STD,
-+		NumEraseRegions: 1,
-+		regions: {ERASEINFO(0x01000,1024),
-+		}
-+        }
- };
- 
- 
-@@ -967,6 +1006,35 @@
- 	p_cfi->cfiq->DevSize = jedec_table[index].DevSize;
- 	p_cfi->cfi_mode = CFI_MODE_JEDEC;
- 
-+	/*
-+	 * Add the following code to set the flash timing parameters.
-+	 * Maybe this is done in a table somwehere else? I can't find it.
-+	 */
-+	   
-+	   
-+	switch(jedec_table[index].dev_id) {
-+	case SST39VF3201:
-+	case SST39VF3202:
-+		p_cfi->cfiq->WordWriteTimeoutTyp = 3;  /* 8 us */
-+		p_cfi->cfiq->WordWriteTimeoutMax = 4;  /* 16 us */
-+		p_cfi->cfiq->BlockEraseTimeoutTyp = 15; /* Actually 18ms, max 25 */
-+		p_cfi->cfiq->BlockEraseTimeoutMax =  15;  /*  Actually 25ms */ 
-+		p_cfi->cfiq->ChipEraseTimeoutTyp = 16;  /* Max is 50ms, typical is 40ms */
-+		p_cfi->cfiq->ChipEraseTimeoutMax = 16;
-+		break;
-+	case SST39LF160:
-+	case SST39LF1601:
-+		p_cfi->cfiq->WordWriteTimeoutTyp = 4;  /* 14 us */
-+		p_cfi->cfiq->WordWriteTimeoutMax = 5;  /* 20 us */
-+		p_cfi->cfiq->BlockEraseTimeoutTyp = 15; /* Actually 18ms, max 25 */
-+		p_cfi->cfiq->BlockEraseTimeoutMax =  15;  /*  Actually 25ms */ 
-+		p_cfi->cfiq->ChipEraseTimeoutTyp = 17;  /* Max is 70ms, typical is 40ms */
-+		p_cfi->cfiq->ChipEraseTimeoutMax = 17;
-+		break;
-+	}
-+
-+
-+
- 	for (i=0; i<num_erase_regions; i++){
- 		p_cfi->cfiq->EraseRegionInfo[i] = jedec_table[index].regions[i];
- 	}
-diff -urN linux-mips/drivers/mtd/Config.in mips-linux-2.4.25/drivers/mtd/Config.in
---- linux-mips/drivers/mtd/Config.in	2005-12-24 15:11:25.091498256 +0000
-+++ mips-linux-2.4.25/drivers/mtd/Config.in	2005-12-30 17:27:21.182195224 +0000
-@@ -14,6 +14,9 @@
-    dep_tristate '  MTD partitioning support' CONFIG_MTD_PARTITIONS $CONFIG_MTD
-    dep_tristate '  MTD concatenating support' CONFIG_MTD_CONCAT $CONFIG_MTD
-    dep_tristate '  RedBoot partition table parsing' CONFIG_MTD_REDBOOT_PARTS $CONFIG_MTD_PARTITIONS
-+   if [ "$CONFIG_MTD_END_RESERVED" != "" ]; then
-+      define_int CONFIG_MTD_END_RESERVED $CONFIG_MTD_END_RESERVED
-+   fi
-    dep_tristate '  Command line partition table parsing' CONFIG_MTD_CMDLINE_PARTS $CONFIG_MTD_PARTITIONS
-    if [ "$CONFIG_ARM" = "y" ]; then
-       dep_tristate '  ARM Firmware Suite partition parsing' CONFIG_MTD_AFS_PARTS $CONFIG_MTD_PARTITIONS
-diff -urN linux-mips/drivers/mtd/devices/Makefile mips-linux-2.4.25/drivers/mtd/devices/Makefile
---- linux-mips/drivers/mtd/devices/Makefile	2005-12-24 15:11:25.128492632 +0000
-+++ mips-linux-2.4.25/drivers/mtd/devices/Makefile	2005-12-30 17:27:21.561137616 +0000
-@@ -22,5 +22,6 @@
- obj-$(CONFIG_MTD_MTDRAM)	+= mtdram.o
- obj-$(CONFIG_MTD_LART)		+= lart.o
- obj-$(CONFIG_MTD_BLKMTD)	+= blkmtd.o
-+obj-$(CONFIG_MTD_SPIFLASH)      += spiflash.o
- 
- include $(TOPDIR)/Rules.make
-diff -urN linux-mips/drivers/mtd/devices/spiflash.c mips-linux-2.4.25/drivers/mtd/devices/spiflash.c
---- linux-mips/drivers/mtd/devices/spiflash.c	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/drivers/mtd/devices/spiflash.c	2005-12-30 17:27:21.652123784 +0000
-@@ -0,0 +1,506 @@
-+
-+/*
-+ * MTD driver for the SPI Flash Memory support.
-+ *
-+ * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.c#3 $
-+ *
-+ *
-+ * Copyright (c) 2005-2006 Atheros Communications Inc.
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+/*===========================================================================
-+** !!!!  VERY IMPORTANT NOTICE !!!!  FLASH DATA STORED IN LITTLE ENDIAN FORMAT
-+**
-+** This module contains the Serial Flash access routines for the Atheros SOC.
-+** The Atheros SOC integrates a SPI flash controller that is used to access
-+** serial flash parts. The SPI flash controller executes in "Little Endian"
-+** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be
-+** BYTESWAPPED! The SPI Flash controller hardware by default performs READ
-+** ONLY byteswapping when accessed via the SPI Flash Alias memory region
-+** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the
-+** flash sectors is stored in "Little Endian" format.
-+**
-+** The spiflash_write() routine performs byteswapping on all write
-+** operations.
-+**===========================================================================*/
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <asm/delay.h>
-+#include <asm/io.h>
-+#include "spiflash.h"
-+
-+/* debugging */
-+/* #define SPIFLASH_DEBUG */
-+
-+#ifndef __BIG_ENDIAN
-+#error This driver currently only works with big endian CPU.
-+#endif
-+
-+static char module_name[] = "spiflash";
-+
-+#define MIN(a,b)        ((a) < (b) ? (a) : (b))
-+#define FALSE 	0
-+#define TRUE 	1
-+
-+#define ROOTFS_NAME	"rootfs"
-+
-+static __u32 spiflash_regread32(int reg);
-+static void spiflash_regwrite32(int reg, __u32 data);
-+static __u32 spiflash_sendcmd (int op);
-+
-+int __init spiflash_init (void);
-+void __exit spiflash_exit (void);
-+static int spiflash_probe (void);
-+static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr);
-+static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf);
-+static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf);
-+
-+/* Flash configuration table */
-+struct flashconfig {
-+    __u32 byte_cnt;
-+    __u32 sector_cnt;
-+    __u32 sector_size;
-+    __u32 cs_addrmask;
-+} flashconfig_tbl[MAX_FLASH] =
-+    {
-+        { 0, 0, 0, 0},
-+        { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0},
-+        { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0},
-+        { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0}
-+    };
-+
-+/* Mapping of generic opcodes to STM serial flash opcodes */
-+struct opcodes {
-+    __u16 code;
-+    __s8 tx_cnt;
-+    __s8 rx_cnt;
-+} stm_opcodes[] = {
-+        {STM_OP_WR_ENABLE, 1, 0},
-+        {STM_OP_WR_DISABLE, 1, 0},
-+        {STM_OP_RD_STATUS, 1, 1},
-+        {STM_OP_WR_STATUS, 1, 0},
-+        {STM_OP_RD_DATA, 4, 4},
-+        {STM_OP_FAST_RD_DATA, 1, 0},
-+        {STM_OP_PAGE_PGRM, 8, 0},
-+        {STM_OP_SECTOR_ERASE, 4, 0},
-+        {STM_OP_BULK_ERASE, 1, 0},
-+        {STM_OP_DEEP_PWRDOWN, 1, 0},
-+        {STM_OP_RD_SIG, 4, 1}
-+};
-+
-+/* Driver private data structure */
-+struct spiflash_data {
-+	struct 	mtd_info       *mtd;	
-+	struct 	mtd_partition  *parsed_parts;     /* parsed partitions */
-+	void 	*spiflash_readaddr; /* memory mapped data for read  */
-+	void 	*spiflash_mmraddr;  /* memory mapped register space */
-+};
-+
-+static struct spiflash_data *spidata;
-+
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
-+
-+/***************************************************************************************************/
-+
-+static __u32
-+spiflash_regread32(int reg)
-+{
-+	volatile __u32 *data = (__u32 *)(spidata->spiflash_mmraddr + reg);
-+
-+	return (*data);
-+}
-+
-+static void 
-+spiflash_regwrite32(int reg, __u32 data)
-+{
-+	volatile __u32 *addr = (__u32 *)(spidata->spiflash_mmraddr + reg);
-+
-+	*addr = data;
-+	return;
-+}
-+
-+static __u32 
-+spiflash_sendcmd (int op)
-+{
-+	 __u32 reg;
-+	 __u32 mask;
-+	struct opcodes *ptr_opcode;
-+
-+	ptr_opcode = &stm_opcodes[op];
-+
-+	do {
-+		reg = spiflash_regread32(SPI_FLASH_CTL);
-+	} while (reg & SPI_CTL_BUSY);
-+
-+	spiflash_regwrite32(SPI_FLASH_OPCODE, ptr_opcode->code);
-+
-+	reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt |
-+        	(ptr_opcode->rx_cnt << 4) | SPI_CTL_START;
-+
-+	spiflash_regwrite32(SPI_FLASH_CTL, reg);
-+ 
-+	if (ptr_opcode->rx_cnt > 0) {
-+        	do {
-+          		reg = spiflash_regread32(SPI_FLASH_CTL);
-+        	} while (reg & SPI_CTL_BUSY);
-+
-+        	reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
-+
-+        	switch (ptr_opcode->rx_cnt) {
-+        	case 1:
-+            		mask = 0x000000ff;
-+            		break;
-+        	case 2:
-+            		mask = 0x0000ffff;
-+            		break;
-+        	case 3:
-+            		mask = 0x00ffffff;
-+            		break;
-+        	default:
-+            		mask = 0xffffffff;
-+            		break;
-+        	}
-+
-+        	reg &= mask;
-+   	}
-+	else {
-+       		reg = 0;
-+    	}
-+
-+	return reg;
-+}
-+
-+/* Probe SPI flash device
-+ * Function returns 0 for failure.
-+ * and flashconfig_tbl array index for success.
-+ */
-+static int 
-+spiflash_probe (void)
-+{
-+	__u32 sig;
-+   	int flash_size;
-+
-+   	/* Read the signature on the flash device */
-+   	sig = spiflash_sendcmd(SPI_RD_SIG);
-+
-+   	switch (sig) {
-+   	case STM_8MBIT_SIGNATURE:
-+            	flash_size = FLASH_1MB;
-+        	break;
-+        case STM_16MBIT_SIGNATURE:
-+            	flash_size = FLASH_2MB;
-+            	break;
-+        case STM_32MBIT_SIGNATURE:
-+            	flash_size = FLASH_4MB;
-+            	break;
-+        default:
-+	    	printk (KERN_WARNING "%s: Read of flash device signature failed!\n", module_name);
-+            	return (0);
-+   	}
-+
-+   	return (flash_size);
-+}
-+
-+
-+static int 
-+spiflash_erase (struct mtd_info *mtd,struct erase_info *instr)
-+{
-+	struct opcodes *ptr_opcode;
-+	__u32 temp, reg;
-+	int finished = FALSE;
-+
-+#ifdef SPIFLASH_DEBUG
-+   	printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n",__FUNCTION__,instr->addr,instr->len);
-+#endif
-+
-+   	/* sanity checks */
-+   	if (instr->addr + instr->len > mtd->size) return (-EINVAL);
-+
-+	ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE];
-+
-+	temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code);
-+	spiflash_sendcmd(SPI_WRITE_ENABLE);
-+	do {
-+		reg = spiflash_regread32(SPI_FLASH_CTL);
-+	} while (reg & SPI_CTL_BUSY);
-+
-+	spiflash_regwrite32(SPI_FLASH_OPCODE, temp);
-+
-+	reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START;
-+	spiflash_regwrite32(SPI_FLASH_CTL, reg);
-+
-+	do {
-+		reg = spiflash_sendcmd(SPI_RD_STATUS);
-+		if (!(reg & SPI_STATUS_WIP)) {
-+			finished = TRUE;
-+		}
-+	} while (!finished);
-+
-+   	instr->state = MTD_ERASE_DONE;
-+   	if (instr->callback) instr->callback (instr);
-+
-+#ifdef SPIFLASH_DEBUG
-+   	printk (KERN_DEBUG "%s return\n",__FUNCTION__);
-+#endif
-+   	return (0);
-+}
-+
-+static int 
-+spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf)
-+{
-+	u_char	*read_addr;
-+
-+#ifdef SPIFLASH_DEBUG
-+   	printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) from,(int)len);  
-+#endif
-+
-+   	/* sanity checks */
-+   	if (!len) return (0);
-+   	if (from + len > mtd->size) return (-EINVAL);
-+	
-+
-+   	/* we always read len bytes */
-+   	*retlen = len;
-+
-+	read_addr = (u_char *)(spidata->spiflash_readaddr + from);
-+	memcpy(buf, read_addr, len);
-+
-+   	return (0);
-+}
-+
-+static int 
-+spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf)
-+{
-+	int done = FALSE, page_offset, bytes_left, finished;
-+	__u32 xact_len, spi_data = 0, opcode, reg;
-+
-+#ifdef SPIFLASH_DEBUG
-+   	printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) to,len); 
-+#endif
-+
-+   	*retlen = 0;
-+	
-+   	/* sanity checks */
-+   	if (!len) return (0);
-+   	if (to + len > mtd->size) return (-EINVAL);
-+	
-+	opcode = stm_opcodes[SPI_PAGE_PROGRAM].code;
-+	bytes_left = len;
-+	
-+	while (done == FALSE) {
-+		xact_len = MIN(bytes_left, sizeof(__u32));
-+
-+		/* 32-bit writes cannot span across a page boundary
-+		 * (256 bytes). This types of writes require two page
-+		 * program operations to handle it correctly. The STM part
-+		 * will write the overflow data to the beginning of the
-+		 * current page as opposed to the subsequent page.
-+		 */
-+		page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len;
-+
-+		if (page_offset > STM_PAGE_SIZE) {
-+			xact_len -= (page_offset - STM_PAGE_SIZE);
-+		}
-+
-+		spiflash_sendcmd(SPI_WRITE_ENABLE);
-+
-+		do {
-+			reg = spiflash_regread32(SPI_FLASH_CTL);
-+		} while (reg & SPI_CTL_BUSY);
-+	
-+		switch (xact_len) {
-+			case 1:
-+			 	(__u8)spi_data = *buf;
-+				break;
-+			case 2:
-+				spi_data = (buf[1] << 8) | buf[0];
-+				break;
-+			case 3:
-+				spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0];
-+				break;
-+			case 4:
-+				spi_data = (buf[3] << 24) | (buf[2] << 16) | 
-+							(buf[1] << 8) | buf[0];
-+				break;
-+			default:
-+				printk("spiflash_write: default case\n");
-+				break;
-+		}
-+
-+		spiflash_regwrite32(SPI_FLASH_DATA, spi_data);
-+		opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8);
-+		spiflash_regwrite32(SPI_FLASH_OPCODE, opcode);
-+
-+		reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START;
-+		spiflash_regwrite32(SPI_FLASH_CTL, reg);
-+		finished = FALSE;
-+		
-+		do {
-+			udelay(1);
-+			reg = spiflash_sendcmd(SPI_RD_STATUS);
-+			if (!(reg & SPI_STATUS_WIP)) {
-+				finished = TRUE;
-+			}
-+		} while (!finished);
-+
-+		bytes_left -= xact_len;
-+		to += xact_len;
-+		buf += xact_len;
-+
-+   		*retlen += xact_len;
-+
-+		if (bytes_left == 0) {
-+			done = TRUE;
-+		}
-+	}
-+
-+   	return (0);
-+}
-+
-+
-+int __init 
-+spiflash_init (void)
-+{
-+   	int result, i;
-+   	int index, num_parts;
-+	struct mtd_info *mtd;
-+	struct  mtd_partition  *mtd_parts;
-+
-+   	spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL);
-+   	if (!spidata)
-+		return (-ENXIO);
-+
-+	spidata->spiflash_mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
-+	if (!spidata->spiflash_mmraddr) {
-+       		printk (KERN_WARNING "%s: Failed to map flash device\n", module_name);
-+		kfree(spidata);
-+       		return (-ENXIO);
-+	}
-+
-+   	mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+   	if (!mtd) {
-+		kfree(spidata);
-+		return (-ENXIO);
-+	}
-+	
-+   	memset (mtd,0,sizeof (*mtd));
-+	
-+   	printk ("MTD driver for SPI flash.\n");
-+   	printk ("%s: Probing for Serial flash ...\n", module_name);
-+   	if (!(index = spiflash_probe ())) {
-+       		printk (KERN_WARNING "%s: Found no serial flash device\n", module_name);
-+		kfree(mtd);
-+		kfree(spidata);
-+       		return (-ENXIO);
-+   	}
-+   	printk ("%s: Found SPI serial Flash.\n", module_name);
-+   	printk ("%d: size\n", flashconfig_tbl[index].byte_cnt);
-+
-+	spidata->spiflash_readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
-+	if (!spidata->spiflash_readaddr) {
-+       		printk (KERN_WARNING "%s: Failed to map flash device\n", module_name);
-+		kfree(mtd);
-+		kfree(spidata);
-+       		return (-ENXIO);
-+	}
-+
-+   	mtd->name = module_name;
-+   	mtd->type = MTD_NORFLASH;
-+   	mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
-+   	mtd->size = flashconfig_tbl[index].byte_cnt;
-+   	mtd->erasesize = flashconfig_tbl[index].sector_size;
-+   	mtd->numeraseregions = 0;
-+   	mtd->eraseregions = NULL;
-+   	mtd->module = THIS_MODULE;
-+   	mtd->erase = spiflash_erase;
-+   	mtd->read = spiflash_read;
-+   	mtd->write = spiflash_write;
-+	
-+#ifdef SPIFLASH_DEBUG
-+	printk (KERN_DEBUG
-+		   "mtd->name = %s\n"
-+		   "mtd->size = 0x%.8x (%uM)\n"
-+		   "mtd->erasesize = 0x%.8x (%uK)\n"
-+		   "mtd->numeraseregions = %d\n",
-+		   mtd->name,
-+		   mtd->size, mtd->size / (1024*1024),
-+		   mtd->erasesize, mtd->erasesize / 1024,
-+		   mtd->numeraseregions);
-+
-+   	if (mtd->numeraseregions) {
-+	 	for (result = 0; result < mtd->numeraseregions; result++) {
-+	   		printk (KERN_DEBUG
-+			   "\n\n"
-+			   "mtd->eraseregions[%d].offset = 0x%.8x\n"
-+			   "mtd->eraseregions[%d].erasesize = 0x%.8x (%uK)\n"
-+			   "mtd->eraseregions[%d].numblocks = %d\n",
-+			   result,mtd->eraseregions[result].offset,
-+			   result,mtd->eraseregions[result].erasesize,mtd->eraseregions[result].erasesize / 1024,
-+			   result,mtd->eraseregions[result].numblocks);
-+         	}
-+    	}
-+#endif
-+
-+#ifndef CONFIG_BLK_DEV_INITRD
-+   	/* parse redboot partitions */
-+   	num_parts = parse_redboot_partitions(mtd, &spidata->parsed_parts);
-+
-+#ifdef SPIFLASH_DEBUG
-+   	printk (KERN_DEBUG "Found %d redboot partitions\n", num_parts);
-+#endif
-+
-+	if (num_parts) {
-+   		result = add_mtd_partitions(mtd, spidata->parsed_parts, num_parts);
-+		/* Find root partition */
-+		mtd_parts = spidata->parsed_parts;
-+		for (i=0; i < num_parts; i++) {
-+			if (!strcmp(mtd_parts[i].name, ROOTFS_NAME)) {
-+				/* Create root device */
-+        			ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, i);
-+				break;
-+			}
-+		}
-+	} else {
-+#ifdef SPIFLASH_DEBUG
-+   	printk (KERN_DEBUG "Did not find any redboot partitions\n");
-+#endif
-+		kfree(mtd);
-+		kfree(spidata);
-+       		return (-ENXIO);
-+	}
-+#endif
-+
-+	spidata->mtd = mtd;
-+
-+   	return (result);
-+}
-+
-+void __exit 
-+spiflash_exit (void)
-+{
-+    	if (spidata && spidata->parsed_parts) {
-+        	del_mtd_partitions (spidata->mtd);
-+		kfree(spidata->mtd);
-+		kfree(spidata);
-+    	}
-+}
-+
-+module_init (spiflash_init);
-+module_exit (spiflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Atheros Communications Inc");
-+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
-+
-diff -urN linux-mips/drivers/mtd/devices/spiflash.h mips-linux-2.4.25/drivers/mtd/devices/spiflash.h
---- linux-mips/drivers/mtd/devices/spiflash.h	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/drivers/mtd/devices/spiflash.h	2005-12-30 17:27:21.652123784 +0000
-@@ -0,0 +1,113 @@
-+/*
-+ * SPI Flash Memory support header file.
-+ *
-+ * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $
-+ *
-+ *
-+ * Copyright (c) 2005, Atheros Communications Inc.
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#define FLASH_1MB  1
-+#define FLASH_2MB  2
-+#define FLASH_4MB  3
-+#define MAX_FLASH  4
-+
-+#define STM_PAGE_SIZE           256
-+
-+#define STM_8MBIT_SIGNATURE     0x13
-+#define STM_M25P80_BYTE_COUNT   1048576
-+#define STM_M25P80_SECTOR_COUNT 16
-+#define STM_M25P80_SECTOR_SIZE  0x10000
-+
-+#define STM_16MBIT_SIGNATURE    0x14
-+#define STM_M25P16_BYTE_COUNT   2097152
-+#define STM_M25P16_SECTOR_COUNT 32
-+#define STM_M25P16_SECTOR_SIZE  0x10000
-+
-+#define STM_32MBIT_SIGNATURE    0x15
-+#define STM_M25P32_BYTE_COUNT   4194304
-+#define STM_M25P32_SECTOR_COUNT 64
-+#define STM_M25P32_SECTOR_SIZE  0x10000
-+
-+#define STM_1MB_BYTE_COUNT   STM_M25P80_BYTE_COUNT
-+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
-+#define STM_1MB_SECTOR_SIZE  STM_M25P80_SECTOR_SIZE
-+#define STM_2MB_BYTE_COUNT   STM_M25P16_BYTE_COUNT
-+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
-+#define STM_2MB_SECTOR_SIZE  STM_M25P16_SECTOR_SIZE
-+#define STM_4MB_BYTE_COUNT   STM_M25P32_BYTE_COUNT
-+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
-+#define STM_4MB_SECTOR_SIZE  STM_M25P32_SECTOR_SIZE
-+
-+#define SPI_WRITE_ENABLE    0
-+#define SPI_WRITE_DISABLE   1
-+#define SPI_RD_STATUS       2
-+#define SPI_WR_STATUS       3
-+#define SPI_RD_DATA         4
-+#define SPI_FAST_RD_DATA    5
-+#define SPI_PAGE_PROGRAM    6
-+#define SPI_SECTOR_ERASE    7
-+#define SPI_BULK_ERASE      8
-+#define SPI_DEEP_PWRDOWN    9
-+#define SPI_RD_SIG          10
-+#define SPI_MAX_OPCODES     11
-+
-+#define SFI_WRITE_BUFFER_SIZE   4
-+#define SFI_FLASH_ADDR_MASK     0x00ffffff
-+
-+/*
-+ * ST Microelectronics Opcodes for Serial Flash
-+ */
-+
-+#define STM_OP_WR_ENABLE       0x06     /* Write Enable */
-+#define STM_OP_WR_DISABLE      0x04     /* Write Disable */
-+#define STM_OP_RD_STATUS       0x05     /* Read Status */
-+#define STM_OP_WR_STATUS       0x01     /* Write Status */
-+#define STM_OP_RD_DATA         0x03     /* Read Data */
-+#define STM_OP_FAST_RD_DATA    0x0b     /* Fast Read Data */
-+#define STM_OP_PAGE_PGRM       0x02     /* Page Program */
-+#define STM_OP_SECTOR_ERASE    0xd8     /* Sector Erase */
-+#define STM_OP_BULK_ERASE      0xc7     /* Bulk Erase */
-+#define STM_OP_DEEP_PWRDOWN    0xb9     /* Deep Power-Down Mode */
-+#define STM_OP_RD_SIG          0xab     /* Read Electronic Signature */
-+
-+#define STM_STATUS_WIP       0x01       /* Write-In-Progress */
-+#define STM_STATUS_WEL       0x02       /* Write Enable Latch */
-+#define STM_STATUS_BP0       0x04       /* Block Protect 0 */
-+#define STM_STATUS_BP1       0x08       /* Block Protect 1 */
-+#define STM_STATUS_BP2       0x10       /* Block Protect 2 */
-+#define STM_STATUS_SRWD      0x80       /* Status Register Write Disable */
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+#define AR531XPLUS_SPI_READ     0x1fc00000
-+#define AR531XPLUS_SPI_MMR      0x11300000
-+#define AR531XPLUS_SPI_MMR_SIZE 12
-+
-+#define AR531XPLUS_SPI_CTL      0x00
-+#define AR531XPLUS_SPI_OPCODE   0x04
-+#define AR531XPLUS_SPI_DATA     0x08
-+
-+#define SPI_FLASH_READ          AR531XPLUS_SPI_READ
-+#define SPI_FLASH_MMR           AR531XPLUS_SPI_MMR
-+#define SPI_FLASH_MMR_SIZE      AR531XPLUS_SPI_MMR_SIZE
-+#define SPI_FLASH_CTL           AR531XPLUS_SPI_CTL
-+#define SPI_FLASH_OPCODE        AR531XPLUS_SPI_OPCODE
-+#define SPI_FLASH_DATA          AR531XPLUS_SPI_DATA
-+
-+#define SPI_CTL_START           0x00000100
-+#define SPI_CTL_BUSY            0x00010000
-+#define SPI_CTL_TXCNT_MASK      0x0000000f
-+#define SPI_CTL_RXCNT_MASK      0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
-+#define SPI_CTL_SIZE_MASK       0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK    0x03000000
-+#define SPI_OPCODE_MASK         0x000000ff
-+
-+#define SPI_STATUS_WIP		STM_STATUS_WIP
-diff -urN linux-mips/drivers/mtd/maps/Config.in mips-linux-2.4.25/drivers/mtd/maps/Config.in
---- linux-mips/drivers/mtd/maps/Config.in	2005-12-24 15:11:25.158488072 +0000
-+++ mips-linux-2.4.25/drivers/mtd/maps/Config.in	2005-12-30 17:27:21.660122568 +0000
-@@ -9,7 +9,14 @@
- dep_tristate '  CFI Flash device in physical memory map' CONFIG_MTD_PHYSMAP $CONFIG_MTD_GEN_PROBE
- if [ "$CONFIG_MTD_PHYSMAP" = "y" -o "$CONFIG_MTD_PHYSMAP" = "m" ]; then
-    hex '    Physical start address of flash mapping' CONFIG_MTD_PHYSMAP_START 0x8000000
--   hex '    Physical length of flash mapping' CONFIG_MTD_PHYSMAP_LEN 0x4000000
-+   if [ "$CONFIG_FLASH_2MB" = "y" ]; then
-+	define_hex CONFIG_MTD_PHYSMAP_LEN 200000
-+   fi	
-+   if [ "$CONFIG_FLASH_4MB" = "y" ]; then
-+	define_hex CONFIG_MTD_PHYSMAP_LEN 400000
-+   fi	
-+
-+#   hex '    Physical length of flash mapping' CONFIG_MTD_PHYSMAP_LEN 0x4000000
-    int '    Bus width in octets' CONFIG_MTD_PHYSMAP_BUSWIDTH 2
- fi
- 
-diff -urN linux-mips/drivers/mtd/maps/physmap.c mips-linux-2.4.25/drivers/mtd/maps/physmap.c
---- linux-mips/drivers/mtd/maps/physmap.c	2005-12-24 15:11:25.217479104 +0000
-+++ mips-linux-2.4.25/drivers/mtd/maps/physmap.c	2005-12-30 17:27:22.044064200 +0000
-@@ -80,12 +80,25 @@
- };
- 
- #ifdef CONFIG_MTD_PARTITIONS
--#ifdef CONFIG_MTD_CMDLINE_PARTS
-+#if defined(CONFIG_MTD_CMDLINE_PARTS) || defined(CONFIG_MTD_REDBOOT_PARTS)
- static struct mtd_partition *mtd_parts = 0;
- static int                   mtd_parts_nb = 0;
- #else
- static struct mtd_partition physmap_partitions[] = {
- /* Put your own partition definitions here */
-+    {
-+        name:   "rootfs",
-+#ifdef CONFIG_FLASH_2MB
-+        size:   0x000e0000,
-+	offset: 0x000f0000,
-+#endif
-+#ifdef CONFIG_FLASH_4MB
-+        size:   0x002dd000,
-+        offset: 0x00100000,
-+#endif
-+
-+        /* Allow file system to be mounted for writing */
-+    }
- #if 0
- 	{
- 		name:		"bootROM",
-@@ -138,6 +151,22 @@
- 
- 		add_mtd_device(mymtd);
- #ifdef CONFIG_MTD_PARTITIONS
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+                {
-+                    extern int parse_redboot_partitions(struct mtd_info *master,
-+                                        struct mtd_partition **pparts);
-+
-+                    struct mtd_partition *rb_parts = 0;
-+                    int rb_parts_nb = 0;
-+
-+		    rb_parts_nb = parse_redboot_partitions(mymtd, &rb_parts);
-+		    if (rb_parts_nb > 0) {
-+                        printk(KERN_NOTICE
-+                               "Using redboot flash partitioning");
-+			add_mtd_partitions (mymtd, rb_parts, rb_parts_nb);
-+		    }
-+                }
-+#endif
- #ifdef CONFIG_MTD_CMDLINE_PARTS
- 		mtd_parts_nb = parse_cmdline_partitions(mymtd, &mtd_parts, 
- 							"phys");
-@@ -147,7 +176,8 @@
- 			       "Using command line partition definition\n");
- 			add_mtd_partitions (mymtd, mtd_parts, mtd_parts_nb);
- 		}
--#else
-+#endif
-+#if !defined(CONFIG_MTD_CMDLINE_PARTS) && !defined(CONFIG_MTD_REDBOOT_PARTS)
- 		if (NUM_PARTITIONS != 0) 
- 		{
- 			printk(KERN_NOTICE 
-diff -urN linux-mips/drivers/mtd/redboot.c mips-linux-2.4.25/drivers/mtd/redboot.c
---- linux-mips/drivers/mtd/redboot.c	2005-12-24 15:11:25.249474240 +0000
-+++ mips-linux-2.4.25/drivers/mtd/redboot.c	2005-12-30 17:27:22.517992152 +0000
-@@ -51,8 +51,14 @@
- 		return -ENOMEM;
- 
- 	/* Read the start of the last erase block */
--	ret = master->read(master, master->size - master->erasesize,
-+        {
-+        u_int32_t part_table_start = master->size - master->erasesize;
-+#if defined(CONFIG_MTD_END_RESERVED)
-+        part_table_start -= CONFIG_MTD_END_RESERVED;
-+#endif
-+	ret = master->read(master, part_table_start,
- 			   PAGE_SIZE, &retlen, (void *)buf);
-+        }
- 
- 	if (ret)
- 		goto out;
-diff -urN linux-mips/drivers/net/Config.in mips-linux-2.4.25/drivers/net/Config.in
---- linux-mips/drivers/net/Config.in	2005-12-24 15:11:25.725401888 +0000
-+++ mips-linux-2.4.25/drivers/net/Config.in	2005-12-30 17:27:22.684966768 +0000
-@@ -24,6 +24,18 @@
- comment 'Ethernet (10 or 100Mbit)'
- bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
- if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
-+   define_bool CONFIG_VENETDEV n
-+   tristate ' BUILT-IN ATHEROS ENET DRIVER' CONFIG_NET_ATHEROS_ETHER
-+   if [ "$CONFIG_AP38" = "y" -o "$CONFIG_AP48" = "y"  ]; then
-+      define_bool CONFIG_KENDIN_ENET_PHY y
-+   elif [ "$CONFIG_AP30ASK" = "y" ]; then
-+      define_bool CONFIG_KENDIN_KS8995XA_ENET_PHY y
-+      bool 'Multiple Ethernet address hack ' CONFIG_ASK_MULT_MAC_HACK
-+   elif [ "$CONFIG_AP51" = "y" ]; then
-+      define_bool CONFIG_ICPLUS_ENET_PHY y
-+   else
-+      define_bool CONFIG_MARVELL_ENET_PHY y
-+   fi
-    if [ "$CONFIG_ARM" = "y" ]; then  
-       dep_bool '  ARM EBSA110 AM79C961A support' CONFIG_ARM_AM79C961A $CONFIG_ARCH_EBSA110
-       tristate '  Cirrus Logic CS8900A support' CONFIG_ARM_CIRRUS
-diff -urN linux-mips/drivers/net/Makefile mips-linux-2.4.25/drivers/net/Makefile
---- linux-mips/drivers/net/Makefile	2005-12-24 15:11:25.726401736 +0000
-+++ mips-linux-2.4.25/drivers/net/Makefile	2005-12-30 17:27:22.709962968 +0000
-@@ -31,6 +31,10 @@
-   obj-y += e1000/e1000.o
- endif
- 
-+ifeq ($(CONFIG_NET_ATHEROS_ETHER),y)
-+  obj-y += ath/ae531x.o
-+endif
-+
- ifeq ($(CONFIG_BONDING),y)
-   obj-y += bonding/bonding.o
- endif
-@@ -53,8 +57,13 @@
- subdir-$(CONFIG_SKFP) += skfp
- subdir-$(CONFIG_E100) += e100
- subdir-$(CONFIG_E1000) += e1000
-+subdir-$(CONFIG_NET_ATHEROS_ETHER) += ath
- subdir-$(CONFIG_BONDING) += bonding
- 
-+ifeq ($(CONFIG_ATHAP33),y)
-+subdir-$(CONFIG_ATHAP33) += athap33
-+endif
-+
- #
- # link order important here
- #
-@@ -242,6 +251,10 @@
- obj-$(CONFIG_R8169) += r8169.o
- obj-$(CONFIG_AMD8111_ETH) += amd8111e.o mii.o
- 
-+ifeq ($(CONFIG_ATHAP33),y)
-+obj-$(CONFIG_ATHAP33) += athap33/ath_ap_mips.o
-+endif
-+
- # non-drivers/net drivers who want mii lib
- obj-$(CONFIG_PCMCIA_SMC91C92) += mii.o
- obj-$(CONFIG_USB_USBNET) += mii.o
-diff -urN linux-mips/fs/jffs2/nodelist.h mips-linux-2.4.25/fs/jffs2/nodelist.h
---- linux-mips/fs/jffs2/nodelist.h	2005-12-24 15:11:50.407649616 +0000
-+++ mips-linux-2.4.25/fs/jffs2/nodelist.h	2005-12-30 17:27:51.289618200 +0000
-@@ -31,7 +31,7 @@
-  * provisions above, a recipient may use your version of this file
-  * under either the RHEPL or the GPL.
-  *
-- * $Id: nodelist.h,v 1.46.2.5 2003/11/02 13:54:20 dwmw2 Exp $
-+ * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/fs/jffs2/nodelist.h#3 $
-  *
-  */
- 
-@@ -222,8 +222,8 @@
- #define ALLOC_DELETION	1	/* Deletion node. Best to allow it */
- #define ALLOC_GC	2	/* Space requested for GC. Give it or die */
- 
--#define JFFS2_RESERVED_BLOCKS_BASE 3						/* Number of free blocks there must be before we... */
--#define JFFS2_RESERVED_BLOCKS_WRITE (JFFS2_RESERVED_BLOCKS_BASE + 2)		/* ... allow a normal filesystem write */
-+#define JFFS2_RESERVED_BLOCKS_BASE 2						/* Number of free blocks there must be before we... */
-+#define JFFS2_RESERVED_BLOCKS_WRITE (JFFS2_RESERVED_BLOCKS_BASE + 1)		/* ... allow a normal filesystem write */
- #define JFFS2_RESERVED_BLOCKS_DELETION (JFFS2_RESERVED_BLOCKS_BASE + 1)		/* ... allow a normal filesystem deletion */
- #define JFFS2_RESERVED_BLOCKS_GCTRIGGER (JFFS2_RESERVED_BLOCKS_BASE + 3)	/* ... wake up the GC thread */
- #define JFFS2_RESERVED_BLOCKS_GCBAD (JFFS2_RESERVED_BLOCKS_BASE + 1)		/* ... pick a block from the bad_list to GC */
-diff -urN linux-mips/fs/partitions/Config.in mips-linux-2.4.25/fs/partitions/Config.in
---- linux-mips/fs/partitions/Config.in	2005-12-24 15:11:52.366351848 +0000
-+++ mips-linux-2.4.25/fs/partitions/Config.in	2005-12-30 17:27:52.279467720 +0000
-@@ -39,7 +39,7 @@
-    fi
-    if [ "$CONFIG_AMIGA" != "y" -a "$CONFIG_ATARI" != "y" -a \
-         "$CONFIG_MAC" != "y" -a "$CONFIG_SGI_IP22" != "y" -a \
--	"$CONFIG_SGI_IP27" != "y" ]; then
-+	"$CONFIG_SGI_IP27" != "y" -a "$CONFIG_AR531X" != "y" ]; then
-       define_bool CONFIG_MSDOS_PARTITION y
-    fi
-    if [ "$CONFIG_AMIGA" = "y" -o "$CONFIG_AFFS_FS" = "y" ]; then
-diff -urN linux-mips/include/asm-mips/atheros/ar531xbsp.h mips-linux-2.4.25/include/asm-mips/atheros/ar531xbsp.h
---- linux-mips/include/asm-mips/atheros/ar531xbsp.h	1970-01-01 01:00:00.000000000 +0100
-+++ mips-linux-2.4.25/include/asm-mips/atheros/ar531xbsp.h	2005-12-30 17:28:01.523062480 +0000
-@@ -0,0 +1,17 @@
-+#ifndef __ASM_ATHEROS_BSP_SUPPORT_H
-+#define __ASM_ATHEROS_BSP_SUPPORT_H
-+/*
-+ * These are definitions and functions provided by the bsp to support the
-+ * AR5312 WiSoC running LSDK.  For different BSP implementations, different
-+ * BSP functions will be needed.
-+ */
-+
-+extern unsigned int ar531x_sys_frequency(void);
-+extern const char* get_system_type(void);
-+
-+#ifdef CONFIG_KGDB
-+extern  void kgdbInit(void);
-+extern int kgdbEnabled(void);
-+#endif
-+
-+#endif /* __ASM_ATHEROS_BSP_SUPPORT_H */
-diff -urN linux-mips/include/asm-mips/bootinfo.h mips-linux-2.4.25/include/asm-mips/bootinfo.h
---- linux-mips/include/asm-mips/bootinfo.h	2005-12-24 15:12:00.645093288 +0000
-+++ mips-linux-2.4.25/include/asm-mips/bootinfo.h	2005-12-30 17:28:01.534060808 +0000
-@@ -37,6 +37,7 @@
- #define MACH_GROUP_HP_LJ       20 /* Hewlett Packard LaserJet               */
- #define MACH_GROUP_LASAT       21
- #define MACH_GROUP_TITAN       22 /* PMC-Sierra Titan 			    */
-+#define MACH_GROUP_AR531X      23 /* Atheros AR531X                         */
- 
- /*
-  * Valid machtype values for group unknown (low order halfword of mips_machtype)
-@@ -198,6 +199,17 @@
-  */
- #define	MACH_TITAN_YOSEMITE	1 	/* PMC-Sierra Yosemite */
- 
-+/*
-+ * Valid machtype for group MACH_GROUP_AR5312
-+ */
-+#define MACH_ATHEROS_UNUSED     0
-+#define MACH_ATHEROS_AP30       1       /* AP30 */
-+#define MACH_ATHEROS_AP33	2       /* AP33 */
-+#define MACH_ATHEROS_AP38       3       /* AP38 */
-+#define MACH_ATHEROS_AP43       4       /* AP43 */
-+#define MACH_ATHEROS_AP48       5       /* AP48 */
-+#define MACH_ATHEROS_PB32       6       /* PB32 */
-+
- #define CL_SIZE			(256)
- 
- const char *get_system_type(void);
-diff -urN linux-mips/include/asm-mips/page.h mips-linux-2.4.25/include/asm-mips/page.h
---- linux-mips/include/asm-mips/page.h	2005-12-24 15:12:01.097024584 +0000
-+++ mips-linux-2.4.25/include/asm-mips/page.h	2005-12-30 17:28:01.898005480 +0000
-@@ -13,7 +13,6 @@
- #include <linux/config.h>
- #include <asm/break.h>
- 
--#ifdef __KERNEL__
- 
- /*
-  * PAGE_SHIFT determines the page size
-@@ -30,6 +29,7 @@
- #define PAGE_SIZE	(1L << PAGE_SHIFT)
- #define PAGE_MASK	(~(PAGE_SIZE-1))
- 
-+#ifdef __KERNEL__
- #ifndef __ASSEMBLY__
- 
- #include <asm/cacheflush.h>
-diff -urN linux-mips/include/asm-mips/serial.h mips-linux-2.4.25/include/asm-mips/serial.h
---- linux-mips/include/asm-mips/serial.h	2005-12-24 15:12:01.130019568 +0000
-+++ mips-linux-2.4.25/include/asm-mips/serial.h	2005-12-30 17:28:02.143968088 +0000
-@@ -410,6 +410,11 @@
- #define DDB5477_SERIAL_PORT_DEFNS
- #endif
- 
-+#if defined(CONFIG_AR531X)
-+#undef RS_TABLE_SIZE
-+#define RS_TABLE_SIZE 1
-+#endif
-+
- #define SERIAL_PORT_DFNS			\
- 	ATLAS_SERIAL_PORT_DEFNS			\
- 	AU1000_SERIAL_PORT_DEFNS		\
-diff -urN linux-mips/kernel/printk.c mips-linux-2.4.25/kernel/printk.c
---- linux-mips/kernel/printk.c	2005-12-24 15:12:09.361768152 +0000
-+++ mips-linux-2.4.25/kernel/printk.c	2005-12-30 17:28:11.943478336 +0000
-@@ -383,6 +383,18 @@
- 	_call_console_drivers(start_print, end, msg_level);
- }
- 
-+#if CONFIG_EARLY_PRINTK_HACK
-+void putDebugChar(char byte);
-+static void emit_log_char(char c)
-+{
-+	if (c == '\n') {
-+		putDebugChar('\r');
-+		putDebugChar('\n');
-+	} else {
-+		putDebugChar(c);
-+	}
-+}
-+#else
- static void emit_log_char(char c)
- {
- 	LOG_BUF(log_end) = c;
-@@ -394,6 +406,7 @@
- 	if (logged_chars < LOG_BUF_LEN)
- 		logged_chars++;
- }
-+#endif
- 
- /*
-  * This is printk.  It can be called from any context.  We want it to work.
-@@ -696,3 +709,4 @@
- 		tty->driver.write(tty, 0, msg, strlen(msg));
- 	return;
- }
-+
-diff -urN linux-mips-orig/drivers/net/ath/ae531x.h linux-mips-new/drivers/net/ath/ae531x.h
---- linux-mips-orig/drivers/net/ath/ae531x.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/ae531x.h	2005-12-31 12:33:57.672538976 +0000
-@@ -0,0 +1,43 @@
-+#ifndef __AE531X_H
-+#define __AE531X_H
-+
-+#include <linux/config.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <asm/io.h>
-+
-+#include "ar531xlnx.h"
-+#include "ae531xreg.h"
-+#include "ae531xmac.h"
-+
-+extern void *ae531x_rxbuf_alloc(ae531x_MAC_t *MACInfo, char **rxBuffp, 
-+				int *rxBuffSizep);
-+extern void ae531x_swptr_free(VIRT_ADDR desc);
-+extern BOOL ae531x_twisted_enet(void);
-+extern void ae531x_MiiWrite(UINT32 phyBase, UINT32 phyAddr, UINT8 reg, 
-+			    UINT16 data);
-+extern UINT16 ae531x_MiiRead(UINT32 phyBase, UINT32 phyAddr, UINT8 reg);
-+extern void ae531x_unitLinkGained(int ethUnit);
-+extern void ae531x_unitLinkLost(int ethUnit);
-+extern void ae531x_WriteDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data);
-+extern void ae531x_MACReset(ae531x_MAC_t *MACInfo);
-+extern void ae531x_DisableComm(ae531x_MAC_t *MACInfo);
-+extern void ae531x_FreeQueues(ae531x_MAC_t *MACInfo);
-+extern void ae531x_reset(ae531x_MAC_t *MACInfo);
-+extern int  ae531x_AllocateQueues(ae531x_MAC_t *MACInfo);
-+extern void ae531x_EnableComm(ae531x_MAC_t *MACInfo);
-+extern void ae531x_DmaIntEnable(ae531x_MAC_t *MACInfo);
-+extern void ae531x_DmaIntDisable(ae531x_MAC_t *MACInfo);
-+extern void ae531x_DmaReset(ae531x_MAC_t *MACInfo);
-+extern void ae531x_BeginResetMode(ae531x_MAC_t *MACInfo);
-+extern void ae531x_AckIntr(ae531x_MAC_t *MACInfo, UINT32 data);
-+extern void ae531x_SetDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val);
-+extern BOOL ae531x_IsInResetMode(ae531x_MAC_t *MACInfo);
-+extern UINT32 ae531x_ReadDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg);
-+extern void ae531x_ClearDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val);
-+
-+#endif   /* __AE531X_H */
-diff -urN linux-mips-orig/drivers/net/ath/ae531xlnx.c linux-mips-new/drivers/net/ath/ae531xlnx.c
---- linux-mips-orig/drivers/net/ath/ae531xlnx.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/ae531xlnx.c	2005-12-31 12:33:57.673538824 +0000
-@@ -0,0 +1,1303 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * Ethernet driver for Atheros' ae531x ethernet MAC.
-+ * This is a fairly generic driver, but it's intended
-+ * for use in typical Atheros products.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <asm/io.h>
-+
-+#include "ar531xlnx.h"
-+#include "ae531xreg.h"
-+#include "ae531xmac.h"
-+#include "ae531x.h"
-+
-+#ifndef EXPORT_SYMTAB
-+#define EXPORT_SYMTAB
-+#endif
-+
-+#ifdef DEBUG
-+void my_mvPhyShow(int ethUnit);
-+#endif
-+
-+static struct ar531x_boarddata *ar531x_boardConfig=NULL;
-+
-+static char *radioConfig=NULL;
-+
-+#define AE531X_LAN_PORT 0
-+#define AE531X_DEV_PER_MAC 1
-+
-+/*
-+ * ae531x_MAC_state contains driver-specific linux-specific per-MAC information.
-+ * The OSinfo member of ae531x_MAC_t points to one of these.
-+ */
-+typedef struct ae531x_MAC_state {
-+    int                         irq;
-+    struct tq_struct            restart_task;
-+    struct net_device_stats     stats;
-+    struct ae531x_dev_sw_state  *dev_sw_state[AE531X_DEV_PER_MAC];
-+    int                         primary_dev;
-+    ae531x_MAC_t                MACInfo; /* hardware state */
-+} ae531x_MAC_state_t;
-+
-+/*
-+ * ae531x_dev_sw_state contains driver-specific linux-specific per-device
-+ * information.  The net_device priv member points to one of these, and
-+ * this structure contains a pointer to the associated MAC information.
-+ */
-+
-+typedef struct ae531x_dev_sw_state {
-+    int                     enetUnit;        /* system unit number "eth%d" */
-+    int                     unit_on_MAC;     /* MAC-relative unit number */
-+    struct net_device       *dev;
-+    ae531x_MAC_state_t      *MAC_state;      /* underlying MAC hw/sw state */
-+} ae531x_dev_sw_state_t;
-+
-+/*
-+ * Driver-independent linux-specific per-ethernet device software information.
-+ */
-+static struct net_device *ae531x_MAC_dev[AR531X_NUM_ENET_MAC * AE531X_DEV_PER_MAC];
-+
-+/* Driver-dependent per-MAC information */
-+static ae531x_MAC_state_t per_MAC_info[AR531X_NUM_ENET_MAC];
-+
-+/*
-+ * Receive buffers need enough room to hold the following:
-+ * 1) a max MTU-sized packet.  
-+ * 2) space for an ethernet header
-+ * 3) room at the beginning of the receive buffer in order
-+ *    to facilitate cooperating drivers that need to PREpend
-+ *    data.
-+ * 4) Depending on configuration, we may need some additional
-+ *    room at the END of the rx buffer for phy-supplied
-+ *    trailers (if any). (c.f. CONFIG_VENETDEV)
-+ *
-+ * The DMA engine insists on 32-bit aligned RX buffers.
-+ * TBDXXX: With current code, the IP stack ends up looking
-+ * at misaligned headers with word operations.  The misaligned
-+ * reads are software-emulated via handle_adel_int.  We'd
-+ * rather align the buffers on a 16-bit boundary, but the
-+ * DMA engine doesn't permit it???
-+ */
-+#define ETH_MAX_MTU 1518
-+#define AE531X_RX_BUF_SIZE \
-+    (((RXBUFF_RESERVE + ETH_HLEN + ETH_MAX_MTU + PHY_TRAILER_SIZE) + 3) & ~3)
-+
-+/* Forward references to local functions */
-+static void ae531x_TxReap(ae531x_MAC_state_t *MAC_state);
-+static int ae531x_phy_poll(void *data);
-+static int ae531x_MAC_stop(struct net_device *dev);
-+static int ae531x_MAC_open(struct net_device *dev);
-+
-+/*******************************************************************************
-+* ae531x_MAC_poll checks for received packets, and sends data
-+* up the stack.
-+*/
-+int
-+ae531x_MAC_poll(struct net_device *dev, int *budget)
-+{
-+    struct sk_buff *skb;
-+    struct sk_buff *newskb;
-+    char *rxBufp;
-+    int unused_length;
-+    VIRT_ADDR   rxDesc;
-+    int length;
-+    ae531x_dev_sw_state_t *dev_sw_state;
-+    ae531x_MAC_state_t *MAC_state;
-+    ae531x_MAC_t *MACInfo;
-+    u32 cmdsts;
-+    int rx_limit;
-+    int rx_received;
-+    int rxDescCount;
-+    struct net_device *rxdev;
-+    int early_stop;
-+    int retval;
-+#ifdef DEBUG
-+	static int rxDescCountMax = 0;
-+#endif
-+
-+    ARRIVE();
-+
-+    dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
-+    MAC_state = dev_sw_state->MAC_state;
-+    MACInfo = &MAC_state->MACInfo;
-+    rx_limit = MAC_state->dev_sw_state[MAC_state->primary_dev]->dev->quota;
-+    rx_received = 0;
-+
-+    rxDescCount = 0;
-+
-+    early_stop = 0;
-+    do {
-+        ae531x_AckIntr(MACInfo, DmaIntRxCompleted);
-+
-+        for(;!early_stop;) {
-+            rxDesc = MACInfo->rxQueue.curDescAddr;
-+            cmdsts = AE531X_DESC_STATUS_GET(KSEG1ADDR(rxDesc));
-+
-+            AE531X_PRINT(AE531X_DEBUG_RX,
-+                  ("examine rxDesc %p with cmdsts=0x%x\n",
-+                   (void *)rxDesc, cmdsts));
-+    
-+            if (cmdsts & DescOwnByDma) {
-+                /* There's nothing left to process in the RX ring */
-+                goto rx_all_done;
-+            }
-+
-+            rxDescCount++;
-+
-+            AE531X_CONSUME_DESC((&MACInfo->rxQueue));
-+    
-+            A_DATA_CACHE_INVAL(rxDesc, AE531X_DESC_SIZE);
-+
-+            /*  Process a packet */
-+            length = AE531X_DESC_STATUS_RX_SIZE(cmdsts) - ETH_CRC_LEN;
-+            if ( (cmdsts & (DescRxFirst |DescRxLast | DescRxErrors)) ==
-+                           (DescRxFirst | DescRxLast) ) {
-+                /* Descriptor status indicates "NO errors" */
-+                skb = AE531X_DESC_SWPTR_GET(rxDesc);
-+    
-+                /*
-+                 * Allocate a replacement skb.
-+                 * We want to get another buffer ready for Rx ASAP.
-+                 */
-+                newskb = (struct sk_buff *)ae531x_rxbuf_alloc(MACInfo, &rxBufp, &unused_length);
-+                if(newskb == NULL ) {
-+                    /*
-+                     * Give this descriptor back to the DMA engine,
-+                     * and drop the received packet.
-+                     */
-+                    MAC_state->stats.rx_dropped++;
-+                    AE531X_PRINT(AE531X_DEBUG_ERROR,
-+                              ("Can't allocate new skb\n"));
-+                } else {
-+                    AE531X_DESC_BUFPTR_SET(rxDesc, virt_to_bus(rxBufp));
-+                    AE531X_DESC_SWPTR_SET(rxDesc, newskb);
-+                }
-+
-+                AE531X_DESC_STATUS_SET(rxDesc, DescOwnByDma);
-+                rxDesc = NULL; /* sanity -- cannot use rxDesc now */
-+                sysWbFlush();
-+    
-+                if (newskb == NULL) {
-+                    retval = 1;
-+                    goto rx_no_skbs;
-+                } else {
-+                    /* Sync data cache w.r.t. DMA */
-+                    A_DATA_CACHE_INVAL(skb->data, length);
-+        
-+                    rxdev = dev_sw_state->dev;
-+
-+                    if (rxdev == NULL) {
-+                        /*
-+                         * We received a packet for a virtual enet device
-+                         * that is no longer up.  Ignore it.
-+                         */
-+                        kfree_skb(skb);
-+                        continue;
-+                    }
-+
-+                    /* Advance data pointer to show that there's data here */
-+                    skb_put(skb, length);
-+                    skb->protocol = eth_type_trans(skb, rxdev);
-+                    skb->dev = rxdev;
-+                    rxdev->last_rx = jiffies;
-+                    rxdev->quota--;
-+
-+                    if (rx_limit-- < 0) {
-+                        early_stop=1;
-+                        /* We've done enough for now -- more later */
-+                        AE531X_PRINT(AE531X_DEBUG_RX_STOP,
-+                            ("Enet%d RX early stop.  Quota=%d rxDescCount=%d budget=%d\n",
-+                             MACInfo->unit, dev->quota, rxDescCount, *budget));
-+                    }
-+                    rx_received++;
-+        
-+                    /* Send the data up the stack */
-+                    AE531X_PRINT(AE531X_DEBUG_RX,
-+                              ("Send data up stack: skb=%p data=%p length=%d\n",
-+                               (void *)skb, (void *)skb->data, length));
-+
-+                    netif_receive_skb(skb);
-+
-+                    MAC_state->stats.rx_packets++;
-+                    MAC_state->stats.rx_bytes += length;
-+                }
-+            } else {
-+                /* Descriptor status indicates ERRORS */
-+                MAC_state->stats.rx_errors++;
-+    
-+                if (cmdsts & (DescRxRunt | DescRxLateColl)) {
-+                    MAC_state->stats.collisions++;
-+                }
-+    
-+                if (cmdsts & DescRxLengthError) {
-+                    MAC_state->stats.rx_length_errors++;
-+                }
-+    
-+                if (cmdsts & DescRxCrc) {
-+                    MAC_state->stats.rx_crc_errors++;
-+                }
-+    
-+                if (cmdsts & DescRxDribbling) {
-+                    MAC_state->stats.rx_frame_errors++;
-+                }
-+				
-+				AE531X_DESC_STATUS_SET(rxDesc, DescOwnByDma);
-+
-+                AE531X_PRINT(AE531X_DEBUG_ERROR,
-+                          ("Bad receive.  rxDesc=%p  cmdsts=0x%8.8x\n",
-+                           (void *)rxDesc, cmdsts));
-+            }
-+        }
-+    } while ((!early_stop) &&
-+             ae531x_ReadDmaReg(MACInfo, DmaStatus) & DmaIntRxCompleted);
-+
-+rx_all_done:
-+    AE531X_PRINT(AE531X_DEBUG_RX, 
-+             ("rx done (%d)\n", rxDescCount));
-+    *budget -= rxDescCount;
-+
-+    if (!early_stop) {
-+        netif_rx_complete(dev);
-+
-+        ae531x_SetDmaReg(MACInfo, DmaIntrEnb,
-+                     DmaIeRxCompleted | DmaIeRxNoBuffer);
-+        ae531x_WriteDmaReg(MACInfo, DmaRxPollDemand, 0);
-+    }
-+    
-+    retval = early_stop;
-+
-+rx_no_skbs:
-+
-+    LEAVE();
-+
-+#ifdef DEBUG
-+	if (rxDescCount > rxDescCountMax) {
-+		printk("max rx %d\n", rxDescCount);
-+		rxDescCountMax = rxDescCount;
-+	}
-+#endif
-+
-+    return retval;
-+}
-+
-+/*******************************************************************************
-+* ae531x_restart stops all ethernet devices associated with a physical MAC,
-+* then shuts down the MAC.  Then it re-opens all devices that were in use.
-+* TBDXXX: needs testing!
-+*/
-+static void
-+ae531x_restart(void *data)
-+{
-+    ae531x_MAC_t *MACInfo = (ae531x_MAC_t *)data;
-+    ae531x_MAC_state_t *MAC_state = (ae531x_MAC_state_t *)MACInfo->OSinfo;
-+    struct net_device *saved_dev[AE531X_DEV_PER_MAC];
-+    int i;
-+
-+    for (i=0; i<AE531X_DEV_PER_MAC; i++) {
-+        if ((saved_dev[i] = MAC_state->dev_sw_state[i]->dev) != NULL) {
-+            ae531x_MAC_stop(saved_dev[i]);
-+        }
-+    }
-+
-+    for (i=0; i<AE531X_DEV_PER_MAC; i++) {
-+        if (saved_dev[i])
-+            ae531x_MAC_open(saved_dev[i]);
-+    }
-+}
-+
-+/*******************************************************************************
-+* ae531x_MAC_intr handle interrupts from an ethernet MAC.
-+* It checks MAC status registers, and dispatches as appropriate.
-+*/
-+void
-+ae531x_MAC_intr(int cpl, void *dev_id, struct pt_regs *regs)
-+{
-+	ae531x_MAC_state_t *MAC_state;
-+	ae531x_MAC_t *MACInfo;
-+	u32 regIsr;
-+	u32 regImr;
-+	u32 pendIntrs;
-+
-+	ARRIVE();
-+	MACInfo = (ae531x_MAC_t *)dev_id;
-+	MAC_state = (ae531x_MAC_state_t *)MACInfo->OSinfo;
-+	for(;;) {
-+		/* Clear any unhandled intr causes. */
-+		ae531x_WriteDmaReg(MACInfo, DmaStatus, UnhandledIntrMask);
-+
-+		regIsr = ae531x_ReadDmaReg(MACInfo, DmaStatus);
-+		regImr = ae531x_ReadDmaReg(MACInfo, DmaIntrEnb);
-+		pendIntrs = regIsr & regImr;
-+
-+		AE531X_PRINT(AE531X_DEBUG_INT,
-+					 ("ethmac%d: intIsr=0x%8.8x intImr=0x%8.8x pendIntrs=0x%8.8x\n",
-+					  MACInfo->unit, regIsr, regImr, pendIntrs ));
-+
-+		if ((pendIntrs & DmaAllIntCauseMask) == 0)
-+			break;
-+
-+		if ((pendIntrs & DmaIntRxCompleted) ||
-+			(pendIntrs & DmaIntRxNoBuffer)) {
-+			if (netif_rx_schedule_prep(MAC_state->dev_sw_state[MAC_state->primary_dev]->dev)) {
-+				ae531x_ClearDmaReg(MACInfo,
-+								   DmaIntrEnb,
-+								   DmaIeRxCompleted | DmaIeRxNoBuffer);
-+				ae531x_AckIntr(MACInfo,
-+							   DmaIntRxCompleted | DmaIntRxNoBuffer);
-+				(void)ae531x_ReadDmaReg(MACInfo, DmaIntrEnb);
-+				__netif_rx_schedule(MAC_state->dev_sw_state[MAC_state->primary_dev]->dev);
-+			} else {
-+#if 0
-+				AE531X_PRINT(AE531X_DEBUG_ERROR,
-+							 ("%s: Interrupt (0x%8.8x/0x%8.8x) while in poll.  regs@%p, pc=%p, ra=%p\n",
-+							  __FILE__,
-+							  regIsr,
-+							  ae531x_ReadDmaReg(MACInfo, DmaIntrEnb),
-+							  (void *)regs,
-+							  (void *)regs->cp0_epc,
-+							  (void *)regs->regs[31]));
-+#endif
-+				ae531x_AckIntr(MACInfo,
-+							   DmaIntRxCompleted | DmaIntRxNoBuffer);
-+			}
-+		}
-+
-+		if (pendIntrs &
-+			(DmaIntTxStopped | DmaIntTxJabber | DmaIntTxUnderflow)) {
-+			AE531X_PRINT(AE531X_DEBUG_ERROR,
-+						 ("ethmac%d: TX Error Intr (0x%x)\n",
-+						  MACInfo->unit, pendIntrs));
-+			ae531x_AckIntr(MACInfo,
-+						   (DmaIntTxStopped | DmaIntTxJabber | DmaIntTxUnderflow));
-+		}
-+
-+		if (pendIntrs & DmaIntBusError) {
-+			AE531X_PRINT(AE531X_DEBUG_ERROR,
-+						 ("ethmac%d: DMA Bus Error Intr (0x%x)\n",
-+						  MACInfo->unit, pendIntrs));
-+			ae531x_AckIntr(MACInfo, DmaIntBusError);
-+			/* Reset the chip, if it's not already being done */
-+			if (ae531x_IsInResetMode(MACInfo)) {
-+				goto intr_done;
-+			}
-+			ae531x_BeginResetMode(MACInfo);
-+			schedule_task(&MAC_state->restart_task);
-+		}
-+
-+		if (pendIntrs & DmaIntRxStopped) {
-+			AE531X_PRINT(AE531X_DEBUG_ERROR,
-+						 ("ethmac%d: RX Stopped Intr (0x%x)\n",
-+						  MACInfo->unit, pendIntrs));
-+			ae531x_AckIntr(MACInfo, DmaIntRxStopped);
-+		}
-+	}
-+
-+ intr_done:
-+	LEAVE();
-+}
-+
-+/*******************************************************************************
-+* ae531x_MAC_get_stats returns statistics for a specified device
-+*/
-+static struct net_device_stats*
-+ae531x_MAC_get_stats(struct net_device *dev)
-+{
-+        ae531x_dev_sw_state_t *dev_sw_state;
-+        ae531x_MAC_state_t *MAC_state;
-+
-+        ARRIVE();
-+        dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
-+        MAC_state = dev_sw_state->MAC_state;
-+
-+        LEAVE();
-+        return &MAC_state->stats;
-+}
-+
-+#define AE531X_PHY_POLL_SECONDS 2
-+
-+#if CONFIG_AR5315
-+
-+/*******************************************************************************
-+* ae531x_getMACInfo returns the MACInfo  of the interface given by unit 
-+*/
-+ae531x_MAC_t *ae531x_getMAcInfo(int ethUnit)
-+{
-+  int i,j;
-+  for(i=0;i<AR531X_NUM_ENET_MAC;++i) {
-+    if(per_MAC_info[i].dev_sw_state) {
-+      for(j=0;j<AE531X_DEV_PER_MAC;++j) {
-+	 if(per_MAC_info[i].dev_sw_state[j]
-+	    && per_MAC_info[i].dev_sw_state[j]->enetUnit == ethUnit)
-+            return (&(per_MAC_info[i].MACInfo));
-+      }
-+    }
-+  }
-+  return NULL;
-+}
-+    
-+
-+#endif
-+
-+/*******************************************************************************
-+* ae531x_phy_poll periodically checks for changes in phy status
-+* (e.g. dropped link).
-+*/
-+static int
-+ae531x_phy_poll(void *data)
-+{
-+    ae531x_dev_sw_state_t *dev_sw_state = (ae531x_dev_sw_state_t *)data;
-+    ae531x_MAC_t *MACInfo = &dev_sw_state->MAC_state->MACInfo;
-+    int unit = dev_sw_state->enetUnit;
-+
-+    while(dev_sw_state->dev!=NULL) {
-+        if (MACInfo->port_is_up) {
-+            phyCheckStatusChange(unit);
-+        }
-+
-+        set_current_state(TASK_UNINTERRUPTIBLE);
-+        schedule_timeout(AE531X_PHY_POLL_SECONDS * HZ);
-+    }
-+
-+    return 0;
-+}
-+
-+
-+static char invalid_enet_MAC_addr[] = {0, 0, 0, 0, 0, 0};
-+
-+/*
-+ * Fetch a pointer to an ethernet's MAC address
-+ * in the Board Configuration data (in flash).
-+ */
-+char *
-+ae531x_enet_mac_address_get(int MACUnit)
-+{
-+	/* XXX: Hack for poorly configured boards.
-+	 *      Cannot setup bridging properly (brctl) when both enet
-+	 *      interfaces share the same MAC address.
-+	 * 
-+	 */
-+
-+#ifdef CONFIG_ASK_MULT_MAC_HACK
-+    static u8  enet0Mac[6] = {0x00, 0x0d, 0x0b, 0x13, 0x6b, 0x16};
-+    static u8  enet1Mac[6] = {0x00, 0x0d, 0x0b, 0x13, 0x6b, 0x17};
-+#endif
-+
-+    if (!ar531x_boardConfig)
-+        return invalid_enet_MAC_addr;
-+    if (MACUnit == 0) {
-+#ifndef CONFIG_ASK_MULT_MAC_HACK
-+        return ar531x_boardConfig->enet0Mac;
-+#else
-+		return enet0Mac;
-+#endif
-+    }
-+    if (MACUnit == 1) {
-+#ifndef CONFIG_ASK_MULT_MAC_HACK
-+        return ar531x_boardConfig->enet1Mac;
-+#else
-+		return enet1Mac;
-+#endif
-+    }
-+    printk("Invalid ethernet MAC unit number (%d)!\n", MACUnit);
-+    return invalid_enet_MAC_addr;
-+}
-+
-+
-+
-+/*******************************************************************************
-+* ae531x_MAC_open is the standard Linux open function.  It puts
-+* hardware into a known good state, allocates queues, starts
-+* the phy polling task, and arranges for interrupts to be handled.
-+*/
-+static int 
-+ae531x_MAC_open(struct net_device *dev)
-+{
-+    ae531x_dev_sw_state_t *dev_sw_state;
-+    ae531x_MAC_state_t *MAC_state;
-+    ae531x_MAC_t *MACInfo;
-+    u8 *MACAddr;
-+    int rv;
-+    struct tq_struct *restart_task;
-+    pid_t phy_poll_pid;
-+    ARRIVE();
-+
-+    dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
-+    dev_sw_state->dev = dev;
-+    MAC_state = dev_sw_state->MAC_state;
-+    MACInfo = &MAC_state->MACInfo;
-+
-+    restart_task = &MAC_state->restart_task;
-+    restart_task->routine = ae531x_restart;
-+    restart_task->data = (void *)MACInfo;
-+
-+    AE531X_PRINT(AE531X_DEBUG_RESET,
-+              ("ae531x_MAC_open eth%d ethmac%d macBase=0x%x dmaBase=0x%x irq=0x%x\n",
-+               dev_sw_state->enetUnit,
-+               MACInfo->unit,
-+               MACInfo->macBase,
-+               MACInfo->dmaBase,
-+               MAC_state->irq));
-+
-+    /* Default MAC address */
-+    MACAddr = ae531x_enet_mac_address_get(MACInfo->unit);
-+    memcpy(dev->dev_addr, MACAddr, dev->addr_len );
-+ 
-+    if (!MACInfo->port_is_up) {
-+        /* Bring MAC and PHY out of reset */
-+        ae531x_reset(MACInfo);
-+    
-+        /* Attach interrupt handler */
-+        rv = request_irq(MAC_state->irq, ae531x_MAC_intr, SA_INTERRUPT,
-+                    "ae531x_MAC_intr", (void *)MACInfo);
-+        if (rv < 0) {
-+            AE531X_PRINT(AE531X_DEBUG_ERROR,
-+                         ("request_irq(0x%x) failed (%d)\n",
-+                          MAC_state->irq, rv));
-+            goto open_failure;
-+        }
-+
-+        /* Initialize PHY */
-+		AE531X_PRINT(AE531X_DEBUG_RESET, ("\n --- phyBase: %08x\n", MACInfo->phyBase));
-+        phySetup(MACInfo->unit, MACInfo->phyBase);
-+
-+        /* Start thread to poll for phy link status changes */
-+        phy_poll_pid = kernel_thread(ae531x_phy_poll, dev_sw_state, 0);
-+        if (phy_poll_pid < 0) {
-+            AE531X_PRINT(AE531X_DEBUG_ERROR,
-+                     ("ethmac%d unable to start Phy Poll thread\n",
-+                     MACInfo->unit));
-+        }
-+
-+        /* Allocate RX/TX Queues */
-+        if (ae531x_AllocateQueues(MACInfo) < 0) {
-+            AE531X_PRINT(AE531X_DEBUG_RESET, ("Queue allocation failed"));
-+            free_irq(MAC_state->irq, (void *)MACInfo);
-+            goto open_failure;
-+        }
-+    
-+        /* Initialize DMA and descriptors */
-+        ae531x_DmaReset(MACInfo);
-+
-+        /* Initialize MAC */
-+        ae531x_MACReset(MACInfo);
-+
-+        /* Enable Receive/Transmit */
-+        ae531x_EnableComm(MACInfo);
-+    
-+        MAC_state->primary_dev = dev_sw_state->unit_on_MAC;
-+        MACInfo->port_is_up = TRUE;
-+    }
-+
-+    dev->trans_start = jiffies;
-+    SET_MODULE_OWNER(dev);
-+
-+    LEAVE();
-+    return 0;
-+
-+open_failure:
-+    LEAVE();
-+    return -1;
-+}
-+
-+/*
-+ * Shut down MAC hardware.
-+ */
-+static void
-+ae531x_MAC_shutdown(ae531x_MAC_state_t *MAC_state)
-+{
-+    ae531x_MAC_t *MACInfo;
-+
-+    MACInfo = &MAC_state->MACInfo;
-+    MACInfo->port_is_up = FALSE;
-+
-+    /* Disable Receive/Transmit */
-+    ae531x_DisableComm(MACInfo);
-+
-+    /* Disable Interrupts */
-+    ae531x_DmaIntDisable(MACInfo);
-+    sysWbFlush();
-+    free_irq(MAC_state->irq, (void *)MACInfo);
-+
-+    /* Free Transmit & Receive skb's/descriptors */
-+    ae531x_TxReap(MAC_state); /* one last time */
-+    ae531x_FreeQueues(MACInfo);
-+}
-+
-+/*******************************************************************************
-+* ae531x_MAC_stop is the standard Linux stop function.  It undoes
-+* everything set up by ae531x_MAC_open.
-+*/
-+static int
-+ae531x_MAC_stop(struct net_device *dev)
-+{
-+    ae531x_dev_sw_state_t *dev_sw_state;
-+    ae531x_MAC_state_t *MAC_state;
-+    ae531x_MAC_t *MACInfo;
-+    int i;
-+
-+    ARRIVE();
-+
-+    dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
-+    MAC_state = dev_sw_state->MAC_state;
-+    MACInfo = &MAC_state->MACInfo;
-+
-+    for (i=0; i<AE531X_DEV_PER_MAC; i++) {
-+        if ((MAC_state->dev_sw_state[i]->dev) &&
-+            (MAC_state->dev_sw_state[i]->dev != dev_sw_state->dev)) {
-+            break;
-+        }
-+    }
-+
-+    if (i < AE531X_DEV_PER_MAC) {
-+        /* Physical MAC is still in use */
-+        if (MAC_state->primary_dev == dev_sw_state->unit_on_MAC) {
-+            /*
-+             * If the primary_dev is being stopped
-+             * then we need to assign a new one.
-+             */
-+            MAC_state->primary_dev = i;
-+        }
-+    } else {
-+        /* Physical MAC is no longer in use */
-+        ae531x_MAC_shutdown(MAC_state);
-+    }
-+
-+    dev_sw_state->dev = NULL;
-+    LEAVE();
-+    return 0;
-+}
-+
-+/*******************************************************************************
-+* ae531x_rxbuf_alloc - Allocate an skb to be associated with an RX descriptor.
-+*
-+* RETURNS: A pointer to the skb.  Also returns a pointer to the underlying
-+* buffer and the size of that buffer. 
-+*/
-+void *
-+ae531x_rxbuf_alloc(ae531x_MAC_t *MACInfo, char **rxBuffp, int *rxBuffSizep)
-+{
-+    int buf_size;
-+    struct sk_buff *skb;
-+    char *rxBuff;
-+    int rxBuffSize;
-+
-+    buf_size = AE531X_RX_BUF_SIZE;
-+
-+    skb = dev_alloc_skb(buf_size);
-+    if (skb) {
-+        /* skb->dev = dev; */
-+        skb_reserve(skb, RXBUFF_RESERVE);
-+
-+        rxBuffSize = skb_tailroom(skb);
-+        rxBuff = skb->tail;
-+
-+        *rxBuffp = rxBuff;
-+        *rxBuffSizep = rxBuffSize;
-+    }
-+
-+    return skb;
-+}
-+
-+/*******************************************************************************
-+* ae531x_swptr_free - Free the skb, if any, associated with a descriptor.
-+*/
-+void
-+ae531x_swptr_free(VIRT_ADDR desc)
-+{
-+    struct sk_buff *skb;
-+
-+    skb = (struct sk_buff *)AE531X_DESC_SWPTR_GET(desc);
-+    if (skb) {
-+        AE531X_DESC_SWPTR_SET(desc, NULL);
-+        kfree_skb(skb);
-+    }
-+}
-+
-+/*******************************************************************************
-+*
-+* ae531x_TxReap - the driver Tx completion routine.
-+*
-+* This routine reaps sk_buffs which have already been transmitted.
-+*
-+*/
-+static void
-+ae531x_TxReap(ae531x_MAC_state_t *MAC_state)
-+{
-+    AE531X_QUEUE      *txq;
-+    VIRT_ADDR         txDesc;
-+    UINT32            cmdsts;
-+    struct            sk_buff *skb;
-+    int               reaped;
-+    ae531x_MAC_t      *MACInfo;
-+    static int        aeUselessReap = 0;
-+#ifdef DEBUG
-+    static int        aeMaxReap = 0;
-+#endif
-+    ARRIVE();
-+
-+    MACInfo = &MAC_state->MACInfo;
-+    txq = &MACInfo->txQueue;
-+    reaped = 0;
-+
-+    while (1) {
-+
-+        txDesc = AE531X_QUEUE_ELE_NEXT_GET(txq, txq->reapDescAddr);
-+        if (txDesc == txq->curDescAddr) {
-+            break;
-+        }
-+
-+        cmdsts = AE531X_DESC_STATUS_GET(KSEG1ADDR(txDesc));
-+        if (cmdsts & DescOwnByDma) {
-+            break;
-+        }
-+
-+        /* Release sk_buff associated with completed transmit */
-+        skb = (struct sk_buff *)AE531X_DESC_SWPTR_GET(txDesc);
-+        if (skb) {
-+            kfree_skb(skb);
-+            AE531X_DESC_SWPTR_SET(txDesc, NULL);
-+        }
-+
-+        /* Update statistics according to completed transmit desc */
-+        if (cmdsts & DescTxErrors) {
-+            AE531X_PRINT(AE531X_DEBUG_ERROR,
-+                    ("enetmac%d Tx prior error: 0x%8.8x <0x%8.8x> 0x%8.8x\n",
-+                    MACInfo->unit,
-+                    cmdsts,
-+                    DescTxErrors,
-+                    (int)txDesc));
-+#ifdef DEBUG
-+			//my_mvPhyShow(MACInfo->unit);
-+	    printk ("ae531xMacControl: 0x%08x\tMacFlowControl: 0x%08x\n",
-+		    ae531x_ReadMacReg(MACInfo, MacControl),
-+		    ae531x_ReadMacReg(MACInfo, MacFlowControl));
-+#endif
-+            MAC_state->stats.tx_errors++;
-+            if (cmdsts & (DescTxLateCollision | DescTxExcCollisions)) {
-+                MAC_state->stats.tx_aborted_errors++;
-+            }
-+            if (cmdsts & (DescTxLostCarrier | DescTxNoCarrier)) {
-+                MAC_state->stats.tx_carrier_errors++;
-+            }
-+        } else {
-+            MAC_state->stats.tx_bytes += AE531X_DESC_STATUS_RX_SIZE(cmdsts);
-+            MAC_state->stats.tx_packets++;
-+        }
-+
-+        MAC_state->stats.collisions +=
-+            ((cmdsts & DescTxCollMask) >> DescTxCollShift);
-+
-+        txq->reapDescAddr = txDesc;
-+        reaped++;
-+    }
-+
-+    if (reaped > 0) {
-+        int i;
-+
-+#ifdef DEBUG
-+		if (reaped > aeMaxReap) {
-+			aeMaxReap = reaped;
-+			printk("max reaped = %d\n", reaped);
-+		}
-+#endif
-+        AE531X_PRINT(AE531X_DEBUG_TX_REAP,
-+             ("reaped %d\n", reaped));
-+
-+        /*
-+         * Re-start transmit queues for all ethernet devices
-+         * associated with this MAC.
-+         */
-+        for (i=0; i<AE531X_DEV_PER_MAC; i++) {
-+            if (MAC_state->dev_sw_state[i]->dev)
-+                netif_start_queue(MAC_state->dev_sw_state[i]->dev);
-+        }
-+    } else {
-+        aeUselessReap++;
-+    }
-+
-+    LEAVE();
-+}
-+
-+
-+/*******************************************************************************
-+* ae531x_MAC_start_xmit sends a packet.
-+*/
-+static int
-+ae531x_MAC_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+    ae531x_dev_sw_state_t *dev_sw_state;
-+    ae531x_MAC_state_t *MAC_state;
-+    ae531x_MAC_t *MACInfo;
-+    u32 buf;
-+    u32 ctrlen;
-+    u32 length;
-+    int mtu;
-+    int max_buf_size;
-+    VIRT_ADDR txDesc;
-+
-+    ARRIVE();
-+
-+    dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
-+    MAC_state = dev_sw_state->MAC_state;
-+    MACInfo = &MAC_state->MACInfo;
-+
-+    length = skb->len;
-+
-+    /* Check if this port is up, else toss packet */
-+    if (!MACInfo->port_is_up) {
-+        buf = virt_to_bus(skb->data);
-+        AE531X_PRINT(AE531X_DEBUG_ERROR,
-+                  ("eth%d Tx Down, dropping buf=0x%8.8x, length=0x%8.8x, skb=%p\n",
-+                   dev_sw_state->enetUnit, buf, length, (void *)skb));
-+
-+        MAC_state->stats.tx_dropped++;
-+        MAC_state->stats.tx_carrier_errors++;
-+        goto dropFrame;
-+    }
-+
-+    if (ae531x_IsInResetMode(MACInfo)) {
-+        AE531X_PRINT(AE531X_DEBUG_ERROR,
-+                  ("eth%d Tx: In Chip reset - drop frame\n",
-+                   dev_sw_state->enetUnit));
-+
-+        MAC_state->stats.tx_dropped++;
-+        MAC_state->stats.tx_aborted_errors++;
-+        goto dropFrame;
-+    }
-+
-+    /* Check if we can transport this packet */
-+    length = max((u32)60, length);  /* total length */
-+    mtu = dev->mtu;
-+    max_buf_size = mtu + ETH_HLEN;
-+    if (length > max_buf_size) {
-+        AE531X_PRINT(AE531X_DEBUG_ERROR,
-+                  ("eth%d Tx: length %d too long.  mtu=%d, trailer=%d\n",
-+                   dev_sw_state->enetUnit, length, mtu, PHY_TRAILER_SIZE));
-+
-+        MAC_state->stats.tx_errors++;
-+        MAC_state->stats.tx_aborted_errors++;
-+
-+        goto dropFrame;
-+    }
-+
-+	/* Reap any old, completed Tx descriptors */
-+	ae531x_TxReap(MAC_state);
-+
-+    txDesc = MACInfo->txQueue.curDescAddr;
-+    if (txDesc == MACInfo->txQueue.reapDescAddr) {
-+        int i;
-+
-+        AE531X_PRINT(AE531X_DEBUG_ERROR,
-+                  ("eth%d Tx: cannot get txDesc\n",
-+                   dev_sw_state->enetUnit));
-+
-+        MAC_state->stats.tx_dropped++;
-+        MAC_state->stats.tx_fifo_errors++;
-+
-+        /*
-+         * Stop transmit queues for any ethernet devices
-+         * associated with this MAC.
-+         */
-+#if 0 /* XXX: no way to recover from queue stop until ae531x_MAC_tx_timeout()
-+	   *      is rewritten to avoid calls to shedule().
-+	   */
-+        for (i=0; i<AE531X_DEV_PER_MAC; i++) {
-+            if (MAC_state->dev_sw_state[i]->dev)
-+                netif_stop_queue(MAC_state->dev_sw_state[i]->dev);
-+        }
-+#endif
-+        goto dropFrame;
-+    }
-+
-+    /* We won't fail now; so consume this descriptor */
-+    AE531X_CONSUME_DESC((&MACInfo->txQueue));
-+
-+    /* Update the descriptor */
-+    buf = virt_to_bus(skb->data);
-+    AE531X_DESC_BUFPTR_SET(txDesc, buf);
-+    AE531X_DESC_SWPTR_SET(txDesc, skb);
-+    ctrlen = AE531X_DESC_CTRLEN_GET(txDesc);
-+    ctrlen = (ctrlen & (DescEndOfRing)) |
-+                            DescTxFirst |
-+                             DescTxLast |
-+                        DescTxIntEnable;
-+
-+    ctrlen |= ((length << DescSize1Shift) & DescSize1Mask);
-+
-+    AE531X_DESC_CTRLEN_SET(txDesc, ctrlen);
-+    AE531X_DESC_STATUS_SET(txDesc, DescOwnByDma);
-+
-+    /* Alert DMA engine to resume Tx */
-+    ae531x_WriteDmaReg(MACInfo, DmaTxPollDemand, 0);
-+    sysWbFlush();
-+
-+    AE531X_PRINT(AE531X_DEBUG_TX,
-+              ("eth%d Tx: Desc=0x%8.8x, L=0x%8.8x, D=0x%8.8x, d=0x%8.8x, length=0x%8.8x\n",
-+               dev_sw_state->enetUnit,
-+               (UINT32)txDesc,
-+               AE531X_DESC_CTRLEN_GET(txDesc),
-+               buf,
-+               AE531X_DESC_LNKBUF_GET(txDesc),
-+               length));
-+
-+    /* Tell upper layers to keep it coming */
-+    dev->trans_start = jiffies;
-+
-+    LEAVE();
-+
-+    return 0;
-+
-+dropFrame:
-+    kfree_skb(skb);
-+    LEAVE();
-+    return 0;
-+}
-+
-+
-+/*******************************************************************************
-+* ae531x_MAC_tx_timeout handles transmit timeouts
-+*/
-+static void
-+ae531x_MAC_tx_timeout(struct net_device *dev)
-+{
-+    ae531x_dev_sw_state_t *dev_sw_state;
-+    ae531x_MAC_state_t *MAC_state;
-+    ae531x_MAC_t *MACInfo;
-+
-+    ARRIVE();
-+
-+    dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
-+    MAC_state = dev_sw_state->MAC_state;
-+    MACInfo = &MAC_state->MACInfo;
-+
-+    AE531X_PRINT(AE531X_DEBUG_ERROR,
-+             ("enet%d: Tx timeout\n", dev_sw_state->enetUnit));
-+
-+    ae531x_restart(MACInfo);
-+
-+    LEAVE();
-+}
-+
-+
-+/*******************************************************************************
-+* ae531x_MAC_do_ioctl is a placeholder for future ioctls.
-+*/
-+static int
-+ae531x_MAC_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+        int rv;
-+        ae531x_MAC_t *MACInfo;
-+        struct ioctl_data {
-+                u32 unit;
-+                u32 addr;
-+                u32 data;
-+        } *req;
-+        ae531x_dev_sw_state_t *dev_sw_state;
-+        ae531x_MAC_state_t *MAC_state;
-+
-+        ARRIVE();
-+
-+        dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
-+        MAC_state = dev_sw_state->MAC_state;
-+        MACInfo = &MAC_state->MACInfo;
-+
-+        req = (struct ioctl_data *)ifr->ifr_data;
-+
-+        switch( cmd ) {
-+        default:
-+            AE531X_PRINT(AE531X_DEBUG_ERROR,
-+                     ("Unsupported ioctl: 0x%x\n", cmd));
-+            rv = -EOPNOTSUPP;
-+        }
-+
-+        LEAVE();
-+        return rv;
-+}
-+
-+static void
-+ae531x_MAC_setup_fntable(struct net_device *dev)
-+{
-+    ARRIVE();
-+
-+    dev->get_stats       = ae531x_MAC_get_stats;
-+    dev->open            = ae531x_MAC_open;
-+    dev->stop            = ae531x_MAC_stop;
-+    dev->hard_start_xmit = ae531x_MAC_start_xmit;
-+    dev->do_ioctl        = ae531x_MAC_do_ioctl;
-+    dev->poll            = ae531x_MAC_poll;
-+    dev->weight          = 16;
-+#if 0 /* XXX: currently, ae531x_MAC_tx_timeout() will call functions
-+	   *      that in turn call schedule(). this is BAD, since the
-+	   *      timeout call runs at interrupt time. until ae531x_MAC_tx_timeout
-+	   *      is rewritten to avoid schedule() calls, we do not use it.
-+	   */
-+    dev->tx_timeout      = ae531x_MAC_tx_timeout;
-+#else
-+    dev->tx_timeout      = NULL;
-+#endif
-+    dev->features        = NETIF_F_HW_CSUM |\
-+                           NETIF_F_HIGHDMA;
-+
-+    LEAVE();
-+}
-+
-+static void
-+ar5312EepromRead(char *EepromAddr, u_int16_t id, unsigned int off, 
-+		 unsigned int nbytes, char *data)
-+{
-+	int i;
-+	
-+	for (i=0; i<nbytes; i++, off++) {
-+		data[i] = EepromAddr[off];
-+	}
-+}
-+
-+int
-+ae531x_get_numMACs(void)
-+{
-+    int devid;
-+    u16 radioMask;
-+
-+    /* Probe to find out the silicon revision and enable the
-+       correct number of macs */
-+    devid = ((u_int16_t) ((sysRegRead(AR531X_REV) >>8) & 
-+			  (AR531X_REV_MAJ | AR531X_REV_MIN)));
-+    switch (devid) {
-+    case AR5212_AR5312_REV2:
-+    case AR5212_AR5312_REV7:
-+        /* Need to determine if we have a 5312 or a 2312 since they
-+           have the same Silicon Rev ID*/
-+        ar5312EepromRead(radioConfig,0,2*AR531X_RADIO_MASK_OFF,2,
-+			 (char *) &radioMask);
-+        if ((radioMask & AR531X_RADIO0_MASK) != 0) {
-+            return 2;
-+        }
-+        return 1;
-+    case AR5212_AR2313_REV8:
-+        return 1;
-+    }
-+        
-+    /* default to 1 */
-+    return 1;
-+}
-+
-+BOOL
-+ae531x_twisted_enet(void)
-+{
-+    int wisoc_revision;
-+
-+    wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S;
-+    if ( (wisoc_revision == AR531X_REV_MAJ_AR2313) ||
-+         /* next clause is used to determine AR2312, based on number of MACs. 
-+          * must do this since revision is same for 5312 and 2312.
-+          */
-+         (wisoc_revision == AR531X_REV_MAJ_AR5312 && ae531x_get_numMACs() == 1) ) {
-+        return TRUE;
-+    } else {
-+        return FALSE;
-+    }
-+}
-+
-+int
-+ae531x_get_board_config(void)
-+{
-+    int dataFound;
-+    char *bd_config;
-+
-+    /*
-+     * Find start of Board Configuration data, using heuristics:
-+     * Search back from the (aliased) end of flash by 0x1000 bytes
-+     * at a time until we find the string "5311", which marks the
-+     * start of Board Configuration.  Give up if we've searched
-+     * more than 500KB.
-+     */
-+    dataFound = 0;
-+    for (bd_config = (char *)0xbffff000;
-+         bd_config > (char *)0xbff80000;
-+         bd_config -= 0x1000)
-+    {
-+        if ( *(int *)bd_config == AR531X_BD_MAGIC) {
-+            dataFound = 1;
-+            break;
-+        }
-+    }
-+
-+    if (!dataFound) {
-+        printk("Could not find Board Configuration Data\n");
-+		bd_config = NULL;
-+    }
-+	
-+    ar531x_boardConfig = (struct ar531x_boarddata *) bd_config;
-+	
-+    return(dataFound);
-+}
-+
-+int
-+ae531x_get_radio_config(void)
-+{
-+    int dataFound;
-+    char *radio_config;
-+
-+    /* 
-+     * Now find the start of Radio Configuration data, using heuristics:
-+     * Search forward from Board Configuration data by 0x1000 bytes
-+     * at a time until we find non-0xffffffff.
-+     */
-+    dataFound = 0;
-+    for (radio_config = ((char *) ar531x_boardConfig) + 0x1000;
-+         radio_config < (char *)0xbffff000;
-+         radio_config += 0x1000)
-+    {
-+        if (*(int *)radio_config != 0xffffffff) {
-+            dataFound = 1;
-+            break;
-+        }
-+    }
-+
-+    if (!dataFound) { /* AR2316 relocates radio config to new location */
-+	dataFound = 0;
-+	for (radio_config = ((char *) ar531x_boardConfig) + 0xf8;
-+	     radio_config < (char *)0xbffff0f8;
-+	     radio_config += 0x1000)
-+	{
-+	    if (*(int *)radio_config != 0xffffffff) {
-+		dataFound = 1;
-+		break;
-+	    }
-+	}
-+    }
-+
-+    if (!dataFound) {
-+        printk("Could not find Radio Configuration data\n");
-+	radio_config = NULL;
-+    }
-+    radioConfig = radio_config;
-+    return(dataFound);
-+}
-+
-+static int __init
-+ae531x_MAC_setup(void)
-+{
-+    int next_dev, i;
-+    struct net_device *dev;
-+    ae531x_dev_sw_state_t *dev_sw_state;
-+    ae531x_MAC_state_t *MAC_state;
-+    ae531x_MAC_t *MACInfo;
-+    char *addr;
-+
-+    ARRIVE();
-+
-+    MOD_INC_USE_COUNT;
-+    for (i=0;i<AR531X_NUM_ENET_MAC * AE531X_DEV_PER_MAC; i++) {
-+	ae531x_MAC_dev[i] = NULL;
-+    }
-+    
-+    if (!ae531x_get_board_config()) {
-+	LEAVE();
-+	return -1;
-+    }
-+    if (!ae531x_get_radio_config()) {
-+	LEAVE();
-+	return(-1);
-+    }
-+    for(i=0, next_dev = AR531X_NUM_ENET_MAC-1; 
-+        i<ae531x_get_numMACs() && next_dev>=0; 
-+        i++, next_dev--){
-+	
-+        /* if MAC is bogus in config data, skip */
-+        addr = ae531x_enet_mac_address_get(next_dev);
-+        if((*(u32 *)addr == 0xffffffff) && (*(u16 *)(addr+4)==0xffff)){
-+            /* bogus MAC config data */
-+            continue;
-+        }
-+	
-+        dev = ae531x_MAC_dev[next_dev] =
-+            init_etherdev(NULL, sizeof(ae531x_dev_sw_state_t));
-+	
-+        if (dev == NULL) {
-+            LEAVE();
-+            return -1;
-+        }
-+	
-+        ae531x_MAC_setup_fntable(dev);
-+
-+        dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
-+        dev_sw_state->enetUnit = next_dev;
-+        dev_sw_state->unit_on_MAC = 0;
-+        MAC_state = &per_MAC_info[next_dev];
-+        dev_sw_state->MAC_state = MAC_state;
-+        MAC_state->dev_sw_state[AE531X_LAN_PORT] = dev_sw_state;
-+        MAC_state->primary_dev = -1;
-+
-+        /* Initialize per-MAC information */
-+        MACInfo = &MAC_state->MACInfo;
-+
-+        MACInfo->unit = next_dev;
-+
-+        if (MACInfo->unit == 0) {
-+            MACInfo->macBase = (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_MAC_OFFSET);
-+            MACInfo->dmaBase = (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_DMA_OFFSET);
-+            MACInfo->phyBase = (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET);
-+            MAC_state->irq = AR531X_IRQ_ENET0_INTRS;
-+        } else {
-+#ifndef CONFIG_AR5315
-+            MACInfo->macBase = (u32) (PHYS_TO_K1(AR531X_ENET1)+AE531X_MAC_OFFSET);
-+            MACInfo->dmaBase = (u32) (PHYS_TO_K1(AR531X_ENET1)+AE531X_DMA_OFFSET);
-+            if (ae531x_twisted_enet()) {
-+                MACInfo->phyBase = (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET);
-+            } else {
-+                MACInfo->phyBase = (u32)(PHYS_TO_K1(AR531X_ENET1)+AE531X_PHY_OFFSET);
-+            }
-+            MAC_state->irq = AR531X_IRQ_ENET1_INTRS;
-+#endif
-+        }
-+
-+        MACInfo->OSinfo = (void *)MAC_state;
-+
-+    }
-+
-+    LEAVE();
-+    return 0;
-+}
-+module_init(ae531x_MAC_setup);
-+
-+/*******************************************************************************
-+* ae531x_MAC_unload is the module unload function
-+*/
-+static void __exit
-+ae531x_MAC_unload(void)
-+{
-+    int i;
-+
-+    for (i=0;i<AR531X_NUM_ENET_MAC * AE531X_DEV_PER_MAC; i++) {
-+        if (ae531x_MAC_dev[i] != NULL) {
-+            if( (((ae531x_dev_sw_state_t *)ae531x_MAC_dev[i]->priv)->dev) != NULL)
-+                  ae531x_MAC_stop(ae531x_MAC_dev[i]);
-+            ae531x_MAC_dev[i] = NULL;
-+        }
-+    }
-+   MOD_DEC_USE_COUNT;
-+}
-+
-+MODULE_AUTHOR("Atheros Communications, Inc.");
-+MODULE_DESCRIPTION("Support for Atheros WiSoC Ethernet device");
-+#ifdef MODULE_LICENSE
-+MODULE_LICENSE("Atheros");
-+#endif
-+module_exit(ae531x_MAC_unload);
-diff -urN linux-mips-orig/drivers/net/ath/ae531xmac.c linux-mips-new/drivers/net/ath/ae531xmac.c
---- linux-mips-orig/drivers/net/ath/ae531xmac.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/ae531xmac.c	2005-12-31 12:33:57.673538824 +0000
-@@ -0,0 +1,951 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+
-+/*
-+ * Ethernet driver for Atheros' ae531x ethernet MAC.
-+ */
-+
-+#if linux
-+#include <linux/config.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/init.h>
-+#include <asm/io.h>
-+
-+#include "ar531xlnx.h"
-+#endif /* linux */
-+
-+#include "ae531xreg.h"
-+#include "ae531xmac.h"
-+
-+#ifdef DEBUG
-+int ae531x_MAC_debug = AE531X_DEBUG_ERROR;
-+#else
-+int ae531x_MAC_debug = 0;
-+#endif
-+
-+extern char *ae531x_enet_mac_address_get(int);
-+
-+/* Forward references to local functions */
-+static void ae531x_QueueDestroy(AE531X_QUEUE *q);
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_ReadMacReg - read AE MAC register
-+*
-+* RETURNS: register value
-+*/
-+UINT32
-+ae531x_ReadMacReg(ae531x_MAC_t *MACInfo, UINT32 reg)
-+{
-+    UINT32 addr = MACInfo->macBase+reg;
-+    UINT32 data;
-+
-+    data = RegRead(addr);
-+    return data;
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_WriteMacReg - write AE MAC register
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_WriteMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data)
-+{
-+    UINT32 addr = MACInfo->macBase+reg;
-+
-+    RegWrite(data, addr);
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_SetMacReg - set bits in AE MAC register
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_SetMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val)
-+{
-+    UINT32 addr = MACInfo->macBase+reg;
-+    UINT32 data = RegRead(addr);
-+
-+    data |= val;
-+    RegWrite(data, addr);
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_ClearMacReg - clear bits in AE MAC register
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_ClearMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val)
-+{
-+    UINT32 addr = MACInfo->macBase+reg;
-+    UINT32 data = RegRead(addr);
-+
-+    data &= ~val;
-+    RegWrite(data, addr);
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_ReadDmaReg - read AE DMA register
-+*
-+* RETURNS: register value
-+*/
-+UINT32
-+ae531x_ReadDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg)
-+{
-+    UINT32 addr = MACInfo->dmaBase+reg;
-+    UINT32 data = RegRead(addr);
-+
-+    return data;
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_WriteDmaReg - write AE DMA register
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_WriteDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data)
-+{
-+    UINT32 addr = MACInfo->dmaBase+reg;
-+
-+    RegWrite(data, addr);
-+}
-+
-+
-+/******************************************************************************
-+ *
-+ * ae531x_AckIntr - clear interrupt bits in the status register.
-+ * Note: Interrupt bits are *cleared* by writing a 1.
-+ */
-+void
-+ae531x_AckIntr(ae531x_MAC_t *MACInfo, UINT32 data)
-+{
-+      ae531x_WriteDmaReg(MACInfo, DmaStatus, data);
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_SetDmaReg - set bits in an AE DMA register
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_SetDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val)
-+{
-+    UINT32 addr = MACInfo->dmaBase+reg;
-+    UINT32 data = RegRead(addr);
-+
-+    data |= val;
-+    RegWrite(data, addr);
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_ClearDmaReg - clear bits in an AE DMA register
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_ClearDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val)
-+{
-+    UINT32 addr = MACInfo->dmaBase+reg;
-+    UINT32 data = RegRead(addr);
-+
-+    data &= ~val;
-+    RegWrite(data, addr);
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_ReadMiiReg - read PHY registers via AE MAC Mii addr/data registers
-+*
-+* RETURNS: register value
-+*/
-+UINT32
-+ae531x_ReadMiiReg(UINT32 phyBase, UINT32 reg)
-+{
-+    UINT32 data;
-+    UINT32 addr = phyBase+reg;
-+
-+    data = RegRead(addr);
-+    return data;
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_WriteMiiReg - write PHY registers via AE MAC Mii addr/data registers
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_WriteMiiReg(UINT32 phyBase, UINT32 reg, UINT32 data)
-+{
-+    UINT32 addr = phyBase+reg;
-+
-+    RegWrite(data, addr);
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_MiiRead - read AE Mii register
-+*
-+* RETURNS: register value
-+*/
-+UINT16
-+ae531x_MiiRead(UINT32 phyBase, UINT32 phyAddr, UINT8 reg)
-+{
-+    UINT32 addr;
-+    UINT16 data;
-+
-+    addr = ((phyAddr << MiiDevShift) & MiiDevMask) | ((reg << MiiRegShift) & MiiRegMask);
-+
-+    ae531x_WriteMiiReg(phyBase, MacMiiAddr, addr );
-+    do {
-+        /* nop */
-+    } while ((ae531x_ReadMiiReg(phyBase, MacMiiAddr ) & MiiBusy) == MiiBusy);
-+
-+    data = ae531x_ReadMiiReg(phyBase, MacMiiData) & 0xFFFF;
-+
-+    return data;
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_MiiWrite - write AE Mii register
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_MiiWrite(UINT32 phyBase, UINT32 phyAddr, UINT8 reg, UINT16 data)
-+{
-+    UINT32 addr;
-+
-+    ae531x_WriteMiiReg(phyBase, MacMiiData, data );
-+
-+    addr = ((phyAddr << MiiDevShift) & MiiDevMask) |
-+        ((reg << MiiRegShift) & MiiRegMask) | MiiWrite;
-+    ae531x_WriteMiiReg(phyBase, MacMiiAddr, addr );
-+
-+    do {
-+        /* nop */
-+    } while ((ae531x_ReadMiiReg(phyBase, MacMiiAddr ) & MiiBusy) == MiiBusy);
-+}
-+
-+
-+/*******************************************************************************
-+* ae531x_BeginResetMode - enter a special "reset mode" in which
-+*    -no interrupts are expected from the device
-+*    -the device will not transmit nor receive
-+*    -attempts to send or receive will return with an error and
-+*    -the device will be reset at the next convenient opportunity.
-+*/
-+void
-+ae531x_BeginResetMode(ae531x_MAC_t *MACInfo)
-+{
-+    /* Set the reset flag */
-+    MACInfo->aeProcessRst = 1;
-+}
-+
-+
-+/*******************************************************************************
-+* ae531x_EndResetMode - exit the special "reset mode" entered
-+* earlier via a call to ae531x_BeginResetMode.
-+*/
-+void
-+ae531x_EndResetMode(ae531x_MAC_t *MACInfo)
-+{
-+    MACInfo->aeProcessRst = 0;
-+}
-+
-+
-+/*******************************************************************************
-+* ae531x_IsInResetMode - determine whether or not the device is
-+* currently in "reset mode" (i.e. that a device reset is pending)
-+*/
-+BOOL
-+ae531x_IsInResetMode(ae531x_MAC_t *MACInfo)
-+{
-+    return MACInfo->aeProcessRst;
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_DmaRxStart - Start Rx
-+*
-+* RETURNS: N/A
-+*/
-+static void
-+ae531x_DmaRxStart(ae531x_MAC_t *MACInfo)
-+{
-+    ae531x_SetDmaReg(MACInfo, DmaControl, DmaRxStart);
-+    sysWbFlush();
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_DmaRxStop - Stop Rx
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_DmaRxStop(ae531x_MAC_t *MACInfo)
-+{
-+    ae531x_ClearDmaReg(MACInfo, DmaControl, DmaRxStart);
-+    sysWbFlush();
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_DmaTxStart - Start Tx
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_DmaTxStart(ae531x_MAC_t *MACInfo)
-+{
-+    ae531x_SetDmaReg(MACInfo, DmaControl, DmaTxStart);
-+    sysWbFlush();
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_DmaTxStop - Stop Tx
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_DmaTxStop(ae531x_MAC_t *MACInfo)
-+{
-+    ae531x_ClearDmaReg(MACInfo, DmaControl, DmaTxStart);
-+    sysWbFlush();
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_DmaIntEnable - Enable DMA interrupts
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_DmaIntEnable(ae531x_MAC_t *MACInfo)
-+{
-+    ae531x_WriteDmaReg(MACInfo, DmaIntrEnb, DmaIntEnable);
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_DmaIntDisable - Disable DMA interrupts
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_DmaIntDisable(ae531x_MAC_t *MACInfo)
-+{
-+    ae531x_WriteDmaReg(MACInfo, DmaIntrEnb, DmaIntDisable);
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_DmaIntClear - Clear DMA interrupts
-+*
-+* RETURNS: N/A
-+*/
-+static void
-+ae531x_DmaIntClear(ae531x_MAC_t *MACInfo)
-+{
-+    /* clear all interrupt requests */
-+    ae531x_WriteDmaReg(MACInfo, DmaStatus,
-+                      ae531x_ReadDmaReg(MACInfo, DmaStatus));  
-+}
-+
-+
-+/******************************************************************************
-+* Initialize generic queue data
-+*/
-+void
-+ae531x_QueueInit(AE531X_QUEUE *q, char *pMem, int count)
-+{
-+    ARRIVE();
-+    q->firstDescAddr = pMem;
-+    q->lastDescAddr = (VIRT_ADDR)((UINT32)q->firstDescAddr +
-+                                  (count - 1) * AE531X_QUEUE_ELE_SIZE);
-+    q->curDescAddr = q->firstDescAddr;
-+    q->count = count;
-+    LEAVE();
-+}
-+
-+
-+/******************************************************************************
-+* ae531x_TxQueueCreate - create a circular queue of descriptors for Transmit
-+*/
-+static int
-+ae531x_TxQueueCreate(ae531x_MAC_t *MACInfo,
-+                  AE531X_QUEUE *q,
-+                  char *pMem,
-+                  int count)
-+{
-+    int         i;
-+    VIRT_ADDR   descAddr;
-+
-+    ARRIVE();
-+
-+    ae531x_QueueInit(q, pMem, count);
-+    q->reapDescAddr = q->lastDescAddr;
-+
-+    /* Initialize Tx buffer descriptors.  */
-+    for (i=0, descAddr=q->firstDescAddr;
-+         i<count;
-+         i++, descAddr=(VIRT_ADDR)((UINT32)descAddr + AE531X_QUEUE_ELE_SIZE))
-+    {
-+        /* Update the size, BUFPTR, and SWPTR fields */
-+
-+        AE531X_DESC_STATUS_SET(descAddr, 0);
-+        AE531X_DESC_CTRLEN_SET(descAddr, 0);
-+
-+        AE531X_DESC_BUFPTR_SET(descAddr, (UINT32)0);
-+        AE531X_DESC_LNKBUF_SET(descAddr, (UINT32)0);
-+        AE531X_DESC_SWPTR_SET(descAddr, (void *)0);
-+    } /* for each desc */
-+
-+    /* Make the queue circular */
-+    AE531X_DESC_CTRLEN_SET(q->lastDescAddr,
-+                       DescEndOfRing|AE531X_DESC_CTRLEN_GET(q->lastDescAddr));
-+
-+    AE531X_PRINT(AE531X_DEBUG_RESET,
-+            ("ethmac%d Txbuf begin = %x, end = %x\n",
-+            MACInfo->unit,
-+            (UINT32)q->firstDescAddr,
-+            (UINT32)q->lastDescAddr));
-+
-+    LEAVE();
-+    return 0;
-+}
-+
-+
-+/******************************************************************************
-+* ae531x_RxQueueCreate - create a circular queue of Rx descriptors
-+*/
-+int
-+ae531x_RxQueueCreate(ae531x_MAC_t *MACInfo,
-+                  AE531X_QUEUE *q,
-+                  char *pMem,
-+                  int count)
-+{
-+    int               i;
-+    VIRT_ADDR         descAddr;
-+
-+    ARRIVE();
-+
-+    ae531x_QueueInit(q, pMem, count);
-+    q->reapDescAddr = NULL;
-+
-+
-+    /* Initialize Rx buffer descriptors */
-+    for (i=0, descAddr=q->firstDescAddr;
-+         i<count;
-+         i++, descAddr=(VIRT_ADDR)((UINT32)descAddr + AE531X_QUEUE_ELE_SIZE))
-+    {
-+        void *swptr;
-+        char *rxBuffer;
-+        int  rxBufferSize;
-+
-+        swptr = ae531x_rxbuf_alloc(MACInfo, &rxBuffer, &rxBufferSize);
-+        if (swptr == NULL) {
-+                AE531X_PRINT(AE531X_DEBUG_RESET,
-+                          ("ethmac%d RX queue: ae531x_rxbuf_alloc failed\n",
-+                           MACInfo->unit));
-+                ae531x_QueueDestroy(q);
-+                return -1;
-+        }
-+        AE531X_DESC_SWPTR_SET(descAddr, swptr);
-+
-+        AE531X_DESC_STATUS_SET(descAddr, DescOwnByDma);
-+        AE531X_DESC_CTRLEN_SET(descAddr, rxBufferSize);
-+        AE531X_DESC_BUFPTR_SET(descAddr, virt_to_bus(rxBuffer));
-+        AE531X_DESC_LNKBUF_SET(descAddr, (UINT32)0);
-+    } /* for each desc */
-+
-+    /* Make the queue circular */
-+    AE531X_DESC_CTRLEN_SET(q->lastDescAddr,
-+                       DescEndOfRing|AE531X_DESC_CTRLEN_GET(q->lastDescAddr));
-+
-+    AE531X_PRINT(AE531X_DEBUG_RESET,
-+              ("ethmac%d Rxbuf begin = %x, end = %x\n",
-+              MACInfo->unit,
-+              (UINT32)q->firstDescAddr,
-+              (UINT32)q->lastDescAddr));
-+
-+    LEAVE();
-+    return 0;
-+}
-+
-+
-+/******************************************************************************
-+* ae531x_QueueDestroy -- Free all buffers and descriptors associated 
-+* with a queue.
-+*/
-+static void
-+ae531x_QueueDestroy(AE531X_QUEUE *q)
-+{
-+    int i;
-+    int count;
-+    VIRT_ADDR    descAddr;
-+
-+    ARRIVE();
-+
-+    count = q->count;
-+
-+    for (i=0, descAddr=q->firstDescAddr;
-+         i<count;
-+         i++, descAddr=(VIRT_ADDR)((UINT32)descAddr + AE531X_QUEUE_ELE_SIZE)) {
-+
-+        AE531X_DESC_STATUS_SET(descAddr, 0);
-+        AE531X_DESC_CTRLEN_SET(descAddr, 0);
-+        AE531X_DESC_BUFPTR_SET(descAddr, (UINT32)0);
-+        AE531X_DESC_LNKBUF_SET(descAddr, (UINT32)0);
-+
-+        ae531x_swptr_free(descAddr); /* Free OS-specific software pointer */
-+    }
-+
-+    LEAVE();
-+}
-+
-+static void
-+ae531x_TxQueueDestroy(ae531x_MAC_t *MACInfo)
-+{
-+    ae531x_QueueDestroy(&MACInfo->txQueue);
-+}
-+
-+static void
-+ae531x_RxQueueDestroy(ae531x_MAC_t *MACInfo)
-+{
-+    ae531x_QueueDestroy(&MACInfo->rxQueue);
-+}
-+
-+
-+/******************************************************************************
-+* ae531x_AllocateQueues - Allocate receive and transmit queues
-+*/
-+int
-+ae531x_AllocateQueues(ae531x_MAC_t *MACInfo)
-+{
-+    size_t QMemSize;
-+    char *pTxBuf = NULL;
-+    char *pRxBuf = NULL;
-+
-+    ARRIVE();
-+
-+    MACInfo->txDescCount = AE531X_TX_DESC_COUNT_DEFAULT;
-+    QMemSize = AE531X_QUEUE_ELE_SIZE * MACInfo->txDescCount;
-+    pTxBuf = MALLOC(QMemSize);
-+    if (pTxBuf == NULL) {
-+        AE531X_PRINT(AE531X_DEBUG_RESET,
-+                  ("ethmac%d Failed to allocate TX queue\n", MACInfo->unit));
-+        goto AllocQFail;
-+    }
-+
-+    if (ae531x_TxQueueCreate(MACInfo, &MACInfo->txQueue, pTxBuf,
-+                          MACInfo->txDescCount) < 0)
-+    {
-+        AE531X_PRINT(AE531X_DEBUG_RESET,
-+                ("ethmac%d Failed to create TX queue\n", MACInfo->unit));
-+        goto AllocQFail;
-+    }
-+
-+    MACInfo->rxDescCount = AE531X_RX_DESC_COUNT_DEFAULT;
-+    QMemSize = AE531X_QUEUE_ELE_SIZE * MACInfo->rxDescCount;
-+    pRxBuf = MALLOC(QMemSize);
-+    if (pRxBuf == NULL) {
-+        AE531X_PRINT(AE531X_DEBUG_RESET,
-+                  ("ethmac%d Failed to allocate RX queue\n", MACInfo->unit));
-+        goto AllocQFail;
-+    }
-+
-+    if (ae531x_RxQueueCreate(MACInfo, &MACInfo->rxQueue, pRxBuf,
-+                          MACInfo->rxDescCount) < 0)
-+    {
-+        AE531X_PRINT(AE531X_DEBUG_RESET,
-+                ("ethmac%d Failed to create RX queue\n", MACInfo->unit));
-+        goto AllocQFail;
-+    }
-+
-+    AE531X_PRINT(AE531X_DEBUG_RESET,
-+            ("ethmac%d Memory setup complete.\n", MACInfo->unit));
-+
-+    LEAVE();
-+    return 0;
-+
-+AllocQFail:
-+    MACInfo->txDescCount = 0; /* sanity */
-+    MACInfo->rxDescCount = 0; /* sanity */
-+
-+    if (pTxBuf) {
-+        FREE(pTxBuf);
-+    }
-+    if (pRxBuf) {
-+        FREE(pRxBuf);
-+    }
-+    
-+    LEAVE();
-+    return -1;
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_FreeQueues - Free Transmit & Receive queues
-+*/
-+void
-+ae531x_FreeQueues(ae531x_MAC_t *MACInfo)
-+{
-+    ae531x_TxQueueDestroy(MACInfo);
-+    FREE(MACInfo->txQueue.firstDescAddr);
-+
-+    ae531x_RxQueueDestroy(MACInfo);
-+    FREE(MACInfo->rxQueue.firstDescAddr);
-+}
-+
-+/******************************************************************************
-+*
-+* ae531x_DmaReset - Reset DMA and TLI controllers
-+*
-+* RETURNS: N/A
-+*/
-+void
-+ae531x_DmaReset(ae531x_MAC_t *MACInfo)
-+{
-+    int        i;
-+    UINT32     descAddr;
-+
-+    ARRIVE();
-+
-+    /* Disable device interrupts prior to any errors during stop */
-+    intDisable(MACInfo->ilevel);
-+
-+    /* Disable MAC rx and tx */
-+    ae531x_ClearMacReg(MACInfo, MacControl, (MacRxEnable | MacTxEnable));
-+
-+    udelay(1);
-+
-+    /* Reset dma controller */
-+    
-+    ae531x_WriteDmaReg(MACInfo, DmaBusMode, DmaResetOn);
-+
-+    /* Delay 2 usec */
-+    sysUDelay(2);
-+
-+    /* Flush the rx queue */
-+    descAddr = (UINT32)MACInfo->rxQueue.firstDescAddr;
-+    MACInfo->rxQueue.curDescAddr = MACInfo->rxQueue.firstDescAddr;
-+    for (i=0;
-+         i<(MACInfo->rxDescCount);
-+         i++, descAddr += AE531X_QUEUE_ELE_SIZE) {
-+            AE531X_DESC_STATUS_SET(descAddr, DescOwnByDma);
-+    }
-+
-+    /* Flush the tx queue */
-+    descAddr = (UINT32)MACInfo->txQueue.firstDescAddr;
-+    MACInfo->txQueue.curDescAddr = MACInfo->txQueue.firstDescAddr;
-+    MACInfo->txQueue.reapDescAddr = MACInfo->txQueue.lastDescAddr;
-+    for (i=0;
-+         i<(MACInfo->txDescCount);
-+         i++, descAddr += AE531X_QUEUE_ELE_SIZE) {
-+            AE531X_DESC_STATUS_SET (descAddr, 0);
-+    }
-+
-+    /* Set init register values  */
-+    ae531x_WriteDmaReg(MACInfo, DmaBusMode, DmaBusModeInit);
-+
-+    /* Install the first Tx and Rx queues on the device */
-+    ae531x_WriteDmaReg(MACInfo, DmaRxBaseAddr,
-+                      virt_to_bus(MACInfo->rxQueue.firstDescAddr));
-+    ae531x_WriteDmaReg(MACInfo, DmaTxBaseAddr,
-+                      virt_to_bus(MACInfo->txQueue.firstDescAddr));
-+
-+
-+    ae531x_WriteDmaReg(MACInfo, DmaControl, DmaStoreAndForward);
-+
-+    ae531x_WriteDmaReg(MACInfo, DmaIntrEnb, DmaIntDisable);
-+
-+    AE531X_PRINT(AE531X_DEBUG_RESET,
-+              ("ethmac%d: DMA RESET!\n", MACInfo->unit));
-+
-+    /* Turn on device interrupts -- enable most errors */
-+    ae531x_DmaIntClear(MACInfo);    /* clear interrupt requests  */
-+    ae531x_DmaIntEnable(MACInfo);   /* enable interrupts */
-+
-+    ae531x_EndResetMode(MACInfo);
-+
-+    intEnable(MACInfo->ilevel);
-+
-+    LEAVE();
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae531x_MACAddressSet - Set the ethernet address
-+*
-+* Sets the ethernet address according to settings in flash.
-+*
-+* RETURNS: void
-+*/
-+static void
-+ae531x_MACAddressSet(ae531x_MAC_t *MACInfo)
-+{
-+    unsigned int    data;
-+    UINT8 *macAddr;
-+
-+    ARRIVE();
-+        
-+    macAddr = ae531x_enet_mac_address_get(MACInfo->unit);
-+
-+    /* set our MAC address  */
-+    data = (macAddr[5]<<8) | macAddr[4];
-+    ae531x_WriteMacReg(MACInfo, MacAddrHigh, data );
-+
-+    data = (macAddr[3]<<24) | (macAddr[2]<<16) | (macAddr[1]<<8) | macAddr[0];
-+    ae531x_WriteMacReg(MACInfo, MacAddrLow, data );
-+
-+    AE531X_PRINT(AE531X_DEBUG_RESET,
-+              ("ethmac%d Verify MAC address %8.8X %8.8X \n",
-+               MACInfo->unit,
-+               ae531x_ReadMacReg(MACInfo, MacAddrLow),
-+               ae531x_ReadMacReg(MACInfo, MacAddrHigh)));
-+
-+    AE531X_PRINT(AE531X_DEBUG_RESET,
-+              ("  sb = %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
-+               0xff&macAddr[0],
-+               0xff&macAddr[1],
-+               0xff&macAddr[2],
-+               0xff&macAddr[3],
-+               0xff&macAddr[4],
-+               0xff&macAddr[5]));
-+    LEAVE();
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ae_SetMACFromPhy - read Phy settings and update Mac
-+*                    with current duplex and speed.
-+*
-+* RETURNS:
-+*/
-+static void
-+ae531x_SetMACFromPhy(ae531x_MAC_t *MACInfo)
-+{
-+    UINT32  macCtl;
-+    BOOL    fullDuplex;
-+    UINT32  timeout;
-+
-+    ARRIVE();
-+
-+    timeout = jiffies+(HZ/1000)*AE531X_NEGOT_TIMEOUT;
-+
-+    /* Get duplex mode from Phy */
-+    while (((fullDuplex = phyIsFullDuplex(MACInfo->unit)) == -1) &&
-+	   (jiffies <= timeout));
-+
-+    /* Flag is set for full duplex mode, else cleared */
-+    macCtl = ae531x_ReadMacReg(MACInfo, MacControl);
-+
-+    if (fullDuplex) {
-+        /* set values of control registers */
-+        macCtl &= ~MacDisableRxOwn;
-+        macCtl |= MacFullDuplex;
-+        ae531x_WriteMacReg(MACInfo, MacControl, macCtl);
-+        ae531x_WriteMacReg(MACInfo, MacFlowControl, MacFlowControlInitFdx);
-+    } else {
-+	/* set values of control registers */
-+        ae531x_WriteMacReg(MACInfo, MacFlowControl, MacFlowControlInitHdx);
-+        macCtl |= MacDisableRxOwn;
-+        macCtl &= ~MacFullDuplex;
-+        ae531x_WriteMacReg(MACInfo, MacControl, macCtl);
-+    }
-+
-+    LEAVE();
-+}
-+
-+
-+/******************************************************************************
-+* ae531x_MACReset -- sets MAC address and duplex.
-+*/
-+void
-+ae531x_MACReset(ae531x_MAC_t *MACInfo)
-+{
-+    ae531x_MACAddressSet(MACInfo);
-+#ifndef CONFIG_AR5315
-+    ae531x_SetMACFromPhy(MACInfo);
-+#endif
-+}
-+
-+
-+/******************************************************************************
-+* ae531x_EnableComm -- enable Transmit and Receive
-+*/
-+void
-+ae531x_EnableComm(ae531x_MAC_t *MACInfo)
-+{
-+    ae531x_SetMacReg(MACInfo, MacControl, (MacRxEnable | MacTxEnable));
-+    ae531x_DmaRxStart(MACInfo);     /* start receiver  */
-+    ae531x_DmaTxStart(MACInfo);     /* start transmitter */
-+}
-+
-+
-+/******************************************************************************
-+* ae531x_DisableComm -- disable Transmit and Receive
-+*/
-+void
-+ae531x_DisableComm(ae531x_MAC_t *MACInfo)
-+{
-+    ae531x_ClearMacReg(MACInfo, MacControl, (MacRxEnable | MacTxEnable));
-+}
-+
-+
-+/******************************************************************************
-+* ae531x_reset -- Cold reset ethernet interface
-+*/
-+void
-+ae531x_reset(ae531x_MAC_t *MACInfo)
-+{
-+    UINT32 mask = 0;
-+    UINT32 regtmp;
-+#ifndef CONFIG_AR5315
-+   
-+    if (MACInfo->unit == 0) {
-+        mask = AR531X_RESET_ENET0 | AR531X_RESET_EPHY0;
-+    } else {
-+        mask = AR531X_RESET_ENET1 | AR531X_RESET_EPHY1;
-+    }
-+
-+    /* Put into reset */
-+    regtmp = sysRegRead(AR531X_RESET);
-+    sysRegWrite(AR531X_RESET, regtmp | mask);
-+    sysMsDelay(15);
-+
-+    /* Pull out of reset */
-+    regtmp = sysRegRead(AR531X_RESET);
-+    sysRegWrite(AR531X_RESET, regtmp & ~mask);
-+    sysUDelay(25);
-+
-+    /* Enable */
-+    if (MACInfo->unit == 0) {
-+        mask = AR531X_ENABLE_ENET0;
-+    } else {
-+        mask = AR531X_ENABLE_ENET1;
-+    }
-+    regtmp = sysRegRead(AR531X_ENABLE);
-+    sysRegWrite(AR531X_ENABLE, regtmp | mask);
-+#else
-+    if (MACInfo->unit == 0) {
-+        mask = AR531X_RESET_ENET0 | AR531X_RESET_EPHY0;
-+    }
-+    /* Enable Arbitration for Ethernet bus */
-+    regtmp = sysRegRead(AR531XPLUS_AHB_ARB_CTL);
-+    regtmp |= ARB_ETHERNET;
-+    sysRegWrite(AR531XPLUS_AHB_ARB_CTL, regtmp);
-+
-+    /* Put into reset */
-+    regtmp = sysRegRead(AR531X_RESET);
-+    sysRegWrite(AR531X_RESET, regtmp | mask);
-+    sysMsDelay(10);
-+
-+    /* Pull out of reset */
-+    regtmp = sysRegRead(AR531X_RESET);
-+    sysRegWrite(AR531X_RESET, regtmp & ~mask);
-+    sysMsDelay(10);
-+
-+    regtmp = sysRegRead(AR531XPLUS_IF_CTL);
-+    regtmp |= IF_TS_LOCAL;
-+    sysRegWrite(AR531XPLUS_IF_CTL, regtmp);
-+#endif
-+}
-+
-+
-+/******************************************************************************
-+* ae531x_unitLinkLost -- Called from PHY layer to notify the MAC layer
-+* that there are no longer any live links associated with a MAC.
-+*/
-+void
-+ae531x_unitLinkLost(int ethUnit)
-+{
-+    AE531X_PRINT(AE531X_DEBUG_LINK_CHANGE,
-+             ("enetmac%d link down\n", ethUnit));
-+}
-+
-+
-+/******************************************************************************
-+* ae531x_unitLinkGained -- Called from PHY layer to notify the MAC layer
-+* that there are 1 or more live links associated with a MAC.
-+*/
-+void
-+ae531x_unitLinkGained(int ethUnit)
-+{
-+#if CONFIG_AR5315
-+#define AE531X_POLL_MILLI_SECONDS 200 
-+    ae531x_MAC_t *MACInfo = ae531x_getMAcInfo(ethUnit);
-+    while(!MACInfo || !MACInfo->port_is_up)
-+    {
-+        set_current_state(TASK_UNINTERRUPTIBLE);
-+        schedule_timeout((AE531X_POLL_MILLI_SECONDS * HZ)/1000);
-+        MACInfo = ae531x_getMAcInfo(ethUnit);
-+    }
-+    ae531x_SetMACFromPhy(MACInfo);
-+#endif
-+    AE531X_PRINT(AE531X_DEBUG_LINK_CHANGE,
-+             ("enet%d link up\n", ethUnit));
-+}
-+
-+/******************************************************************************
-+* ae531x_ethMacDefault -- Called from PHY layer to determine the default
-+* ethernet MAC.  On some "twisted" platforms, the only usable MAC is 1,
-+* while on others the usable MAC is 0.  Future boards may allow both MACs
-+* to be used; in this case, return -1 to indicate that there IS NO default
-+* MAC.
-+*/
-+int
-+ae531x_ethMacDefault(void)
-+{
-+    if (ae531x_twisted_enet())
-+        return 1;
-+
-+    return 0;
-+
-+}
-diff -urN linux-mips-orig/drivers/net/ath/ae531xmac.h linux-mips-new/drivers/net/ath/ae531xmac.h
---- linux-mips-orig/drivers/net/ath/ae531xmac.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/ae531xmac.h	2005-12-31 12:33:57.674538672 +0000
-@@ -0,0 +1,229 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * See README to understand the decomposition of the ethernet driver.
-+ *
-+ * This file contains OS-independent pure software definitions for
-+ * ethernet support on the AR531X platform.
-+ */
-+
-+#ifndef _AE531XMAC_H_
-+#define _AE531XMAC_H_
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+
-+/*
-+ * DEBUG switches to control verbosity.
-+ * Just modify the value of ae531x_MAC_debug.
-+ */
-+#define AE531X_DEBUG_ALL         0xffffffff
-+#define AE531X_DEBUG_ERROR       0x00000001 /* Unusual conditions and Errors */
-+#define AE531X_DEBUG_ARRIVE      0x00000002 /* Arrive into a function */
-+#define AE531X_DEBUG_LEAVE       0x00000004 /* Leave a function */
-+#define AE531X_DEBUG_RESET       0x00000008 /* Reset */
-+#define AE531X_DEBUG_TX          0x00000010 /* Transmit */
-+#define AE531X_DEBUG_TX_REAP     0x00000020 /* Transmit Descriptor Reaping */
-+#define AE531X_DEBUG_RX          0x00000040 /* Receive */
-+#define AE531X_DEBUG_RX_STOP     0x00000080 /* Receive Early Stop */
-+#define AE531X_DEBUG_INT         0x00000100 /* Interrupts */
-+#define AE531X_DEBUG_LINK_CHANGE 0x00000200 /* PHY Link status changed */
-+
-+#define AE531X_NEGOT_TIMEOUT	 500        /* ms to wait for autonegotiation */
-+
-+extern int ae531x_MAC_debug;
-+
-+#define AE531X_PRINT(FLG, X)                            \
-+{                                                   \
-+    if (ae531x_MAC_debug & (FLG)) {                  \
-+        DEBUG_PRINTF("%s#%d:%s ",                   \
-+                     __FILE__,                      \
-+                     __LINE__,                      \
-+                     __FUNCTION__);                 \
-+        DEBUG_PRINTF X;                             \
-+    }                                               \
-+}
-+
-+#define ARRIVE() AE531X_PRINT(AE531X_DEBUG_ARRIVE, ("Arrive{\n"))
-+#define LEAVE() AE531X_PRINT(AE531X_DEBUG_LEAVE, ("}Leave\n"))
-+
-+#define RegRead(addr)	\
-+	(*(volatile unsigned int *)(addr))
-+
-+#define RegWrite(val,addr)	\
-+	((*(volatile unsigned int *)(addr)) = (val))
-+
-+/*****************************************************************
-+ * Phy code is broken out into a separate layer, so that different
-+ * PHY hardware can easily be supported.
-+ *
-+ * These functions are provided by the PHY layer for use by the MAC layer.
-+ *   phySetup             -- Set phy hardware appropriately for a MAC unit
-+ *
-+ *   phyCheckStatusChange -- Look for dropped/initiated links on any
-+ *                           phy port associated with a MAC unit
-+ *
-+ *   phyIsSpeed100        -- Determines whether or not a PHY is up and
-+ *                           running at 100Mbit
-+ *
-+ *   phyIsFullDuplex      -- Determines whether or not a PHY is up and
-+ *                           running in Full Duplex mode
-+ *
-+ */
-+#if CONFIG_MARVELL_ENET_PHY
-+/*
-+ * Mapping of generic phy APIs to Marvell Ethernet Switch phy functions.
-+ */
-+#include "mvPhy.h"
-+#define phySetup(ethUnit, phyBase)      mv_phySetup((ethUnit), (phyBase))
-+#define phyCheckStatusChange(ethUnit)   mv_phyCheckStatusChange(ethUnit)
-+#define phyIsSpeed100(ethUnit)          mv_phyIsSpeed100(ethUnit)
-+#define phyIsFullDuplex(ethUnit)        mv_phyIsFullDuplex(ethUnit)
-+
-+#if CONFIG_VENETDEV
-+#define PHY_TRAILER_SIZE    MV_PHY_TRAILER_SIZE
-+extern void mv_phyDetermineSource(char *data, int len, int *pFromLAN);
-+extern void mv_phySetDestinationPort(char *data, int len, int fromLAN);
-+#define phyDetermineSource(data, len, pFromLAN) mv_phyDetermineSource((data), (len), (pFromLAN))
-+#define phySetDestinationPort(data, len, fromLAN) mv_phySetDestinationPort((data), (len), (fromLAN))
-+#else
-+#define PHY_TRAILER_SIZE    0
-+#endif
-+#endif /* CONFIG_MARVELL_ENET_PHY */
-+
-+#if CONFIG_KENDIN_ENET_PHY || CONFIG_REALTEK_ENET_PHY || CONFIG_KENDIN_KS8995XA_ENET_PHY
-+/*
-+ * Mapping of generic phy APIs to Kendin KS8721B and RealTek RTL8201BL phys.
-+ */
-+#include "rtPhy.h"
-+#define phySetup(ethUnit, phyBase)      rt_phySetup((ethUnit), (phyBase))
-+#define phyCheckStatusChange(ethUnit)   rt_phyCheckStatusChange(ethUnit)
-+#define phyIsSpeed100(ethUnit)          rt_phyIsSpeed100(ethUnit)
-+#define phyIsFullDuplex(ethUnit)        rt_phyIsFullDuplex(ethUnit)
-+#endif
-+
-+#if CONFIG_ICPLUS_ENET_PHY
-+/*
-+ * Mapping of generic phy APIs to Icplus phys.
-+ */
-+#include "ipPhy.h"
-+#define phySetup(ethUnit, phyBase)      ip_phySetup((ethUnit), (phyBase))
-+#define phyCheckStatusChange(ethUnit)   ip_phyCheckStatusChange(ethUnit)
-+#define phyIsSpeed100(ethUnit)          ip_phyIsSpeed100(ethUnit)
-+#define phyIsFullDuplex(ethUnit)        ip_phyIsFullDuplex(ethUnit)
-+#endif
-+
-+#if !defined(PHY_TRAILER_SIZE)
-+#define PHY_TRAILER_SIZE    0
-+#endif
-+
-+/*****************************************************************
-+ * MAC-independent interface to be used by PHY code
-+ *
-+ * These functions are provided by the MAC layer for use by the PHY layer.
-+ */
-+#define phyRegRead ae531x_MiiRead
-+#define phyRegWrite ae531x_MiiWrite
-+#define phyLinkLost(ethUnit) ae531x_unitLinkLost(ethUnit)
-+#define phyLinkGained(ethUnit) ae531x_unitLinkGained(ethUnit)
-+#define phyEthMacDefault() ae531x_ethMacDefault()
-+
-+void ae531x_unitLinkLost(int unit);
-+void ae531x_unitLinkGained(int unit);
-+int ae531x_ethMacDefault(void);
-+
-+
-+/* 
-+ * RXBUFF_RESERVE enables building header on WLAN-side in place 
-+ * NB: Divisible by 2 but NOT 4. Otherwise handle_adel_int() will
-+ *     be used by the ip layer for misaligned word accesses and 
-+ *     performance will suffer - a lot.
-+ */
-+#define ETH_CRC_LEN       4
-+#define RXBUFF_RESERVE   98
-+// #define RXBUFF_RESERVE   98
-+
-+/*****************************************************************
-+ * Descriptor queue
-+ */
-+typedef struct ae531x_queue {
-+    VIRT_ADDR   firstDescAddr;  /* descriptor array address */
-+    VIRT_ADDR   lastDescAddr;   /* last descriptor address */
-+    VIRT_ADDR   curDescAddr;    /* current descriptor address */
-+    VIRT_ADDR   reapDescAddr;   /* current tail of tx descriptors reaped */
-+    UINT16      count;          /* number of elements */
-+} AE531X_QUEUE;
-+
-+/* Given a descriptor, return the next one in a circular list */
-+#define AE531X_QUEUE_ELE_NEXT_GET(q, descAddr)                          \
-+        ((descAddr) == (q)->lastDescAddr) ? (q)->firstDescAddr :    \
-+        (VIRT_ADDR)((UINT32)(descAddr) + AE531X_QUEUE_ELE_SIZE)
-+
-+/* Move the "current descriptor" forward to the next one */
-+#define AE531X_CONSUME_DESC(q)    \
-+         q->curDescAddr = AE531X_QUEUE_ELE_NEXT_GET(q, q->curDescAddr)
-+
-+/*****************************************************************
-+ * Per-ethernet-MAC OS-independent information
-+ */
-+typedef struct ae531x_MAC_s {
-+    u32             unit;          /* MAC unit ID */
-+    u32             macBase;       /* MAC base address */
-+    u32             dmaBase;       /* DMA base address */
-+    u32             phyBase;       /* PHY base address */
-+    AE531X_QUEUE    txQueue;       /* Transmit descriptor queue */
-+    AE531X_QUEUE    rxQueue;       /* Receive descriptor queue */
-+    UINT16          txDescCount;   /* Transmit descriptor count */
-+    UINT16          rxDescCount;   /* Receive descriptor count */
-+    BOOL            aeProcessRst;  /* flag to indicate reset in progress */
-+    BOOL            port_is_up;    /* flag to indicate port is up */
-+    void            *OSinfo;       /* OS-dependent data */
-+} ae531x_MAC_t;
-+
-+#define	AE531X_TX_DESC_COUNT_DEFAULT	128    /* Transmit descriptors */
-+#define AE531X_RX_DESC_COUNT_DEFAULT	128    /* Receive descriptors */
-+
-+
-+/*****************************************************************
-+ * Interfaces exported by the OS-independent MAC layer
-+ */
-+void ae531x_BeginResetMode(ae531x_MAC_t *MACInfo);
-+void ae531x_EndResetMode(ae531x_MAC_t *MACInfo);
-+BOOL ae531x_IsInResetMode(ae531x_MAC_t *MACInfo);
-+int ae531x_RxQueueCreate(ae531x_MAC_t *MACInfo, AE531X_QUEUE *q,
-+                  char *pMem, int count);
-+int ae531x_QueueDelete(struct ae531x_queue *q);
-+void ae531x_DmaReset(ae531x_MAC_t *MACInfo);
-+void ae531x_MACReset(ae531x_MAC_t *MACInfo);
-+void ae531x_EnableComm(ae531x_MAC_t *MACInfo);
-+void ae531x_DisableComm(ae531x_MAC_t *MACInfo);
-+void ae531x_reset(ae531x_MAC_t *MACInfo);
-+int ae531x_AllocateQueues(ae531x_MAC_t *MACInfo);
-+void ae531x_FreeQueues(ae531x_MAC_t *MACInfo);
-+void ae531x_QueueInit(AE531X_QUEUE *q, char *pMem, int count);
-+UINT32 ae531x_ReadMacReg(ae531x_MAC_t *MACInfo, UINT32 reg);
-+void ae531x_WriteMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data);
-+void ae531x_SetMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val);
-+void ae531x_ClearMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val);
-+void ae531x_SetDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val);
-+void ae531x_ClearDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val);
-+UINT32 ae531x_ReadDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg);
-+void ae531x_WriteDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data);
-+UINT32 ae531x_ReadMiiReg(UINT32 phyBase, UINT32 reg);
-+void ae531x_WriteMiiReg(UINT32 phyBase, UINT32 reg, UINT32 data);
-+UINT16 ae531x_MiiRead(UINT32 phyBase, UINT32 phyAddr, UINT8 reg);
-+void ae531x_MiiWrite(UINT32 phyBase, UINT32 phyAddr, UINT8 reg, UINT16 data);
-+void ae531x_DmaIntEnable(ae531x_MAC_t *MACInfo);
-+void ae531x_DmaIntDisable(ae531x_MAC_t *MACInfo);
-+void ae531x_AckIntr(ae531x_MAC_t *MACInfo, UINT32 val);
-+void *ae531x_rxbuf_alloc(ae531x_MAC_t *MACInfo, char **rxBptr, int *rxBSize);
-+void ae531x_swptr_free(VIRT_ADDR txDesc);
-+BOOL ae531x_twisted_enet(void);
-+
-+#endif /* _AE531XMAC_H_ */
-diff -urN linux-mips-orig/drivers/net/ath/ae531xreg.h linux-mips-new/drivers/net/ath/ae531xreg.h
---- linux-mips-orig/drivers/net/ath/ae531xreg.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/ae531xreg.h	2005-12-31 12:33:57.675538520 +0000
-@@ -0,0 +1,439 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * See README to understand the decomposition of the ethernet driver.
-+ *
-+ * Register definitions for Atheros AR531X Ethernet MAC.
-+ */
-+
-+#ifndef _AE531XREG_H_
-+#define _AE531XREG_H_
-+
-+#define AE531X_MAC_OFFSET 0x0000
-+#define AE531X_PHY_OFFSET 0x0000 /* Same as MAC offset */
-+#define AE531X_DMA_OFFSET 0x1000
-+
-+/***********************************************************/
-+/* MAC110 registers, base address is BAR+AE531X_MAC_OFFSET */
-+/***********************************************************/
-+#define MacControl            0x00  /* control */
-+#define MacAddrHigh           0x04  /* address high */
-+#define MacAddrLow            0x08  /* address low */
-+#define MacMultiHashHigh      0x0C  /* multicast hash table high */
-+#define MacMultiHashLow       0x10  /* multicast hash table low */
-+#define MacMiiAddr            0x14  /* MII address */
-+#define MacMiiData            0x18  /* MII data */
-+#define MacFlowControl        0x1C  /* Flow control */
-+#define MacVlan1Tag           0x4C  /* VLAN1 tag */
-+#define MacVlan2Tag           0x50  /* VLAN2 tag */
-+
-+
-+/***************************************************************/
-+/* DMA engine registers, base address is BAR+AE531X_DMA_OFFSET */
-+/***************************************************************/
-+#define DmaBusMode      0x00 /* CSR0 - Bus Mode */
-+#define DmaTxPollDemand 0x04 /* CSR1 - Transmit Poll Demand */
-+#define DmaRxPollDemand 0x08 /* CSR2 - Receive Poll Demand */
-+#define DmaRxBaseAddr   0x0C /* CSR3 - Receive list base address */
-+#define DmaTxBaseAddr   0x10 /* CSR4 - Transmit list base address */
-+#define DmaStatus       0x14 /* CSR5 - Dma status */
-+#define DmaControl      0x18 /* CSR6 - Dma control */
-+#define DmaIntrEnb      0x1C /* CSR7 - Interrupt enable */
-+#define DmaOverflowCnt  0x20 /* CSR8 - Missed Frame and Buff Overflow counter */
-+#define DmaTxCurrAddr   0x50 /* CSR20 - Current host transmit buffer address */
-+#define DmaRxCurrAddr   0x54 /* CSR21 - Current host receive buffer address */
-+
-+/**********************************************************/
-+/* MAC Control register layout                            */
-+/**********************************************************/
-+#define MacFilterOff           0x80000000 /* Receive all incoming packets RW */
-+#define MacFilterOn                     0 /* Receive filtered packets only 0 */
-+#define MacBigEndian           0x40000000 /* Big endian mode RW */
-+#define MacLittleEndian                 0 /* Little endian 0 */
-+#define MacHeartBeatOff        0x10000000 /* Heartbeat signal qual disable RW*/
-+#define MacHeartBeatOn                  0 /* Heartbeat signal qual enable 0 */
-+#define MacSelectSrl           0x08000000 /* Select SRL port RW */
-+#define MacSelectMii                    0 /* Select MII port 0 */
-+#define MacDisableRxOwn        0x00800000 /* Disable receive own packets RW */
-+#define MacEnableRxOwn                  0 /* Enable receive own packets 0 */
-+#define MacLoopbackExt         0x00400000 /* External loopback RW */
-+#define MacLoopbackInt         0x00200000 /* Internal loopback */
-+#define MacLoopbackOff                  0 /* Normal mode 00 */
-+#define MacFullDuplex          0x00100000 /* Full duplex mode RW */
-+#define MacHalfDuplex                   0 /* Half duplex mode 0 */
-+#define MacMulticastFilterOff  0x00080000 /* Pass all multicast packets RW */
-+#define MacMulticastFilterOn            0 /* Pass filtered mcast packets 0 */
-+#define MacPromiscuousModeOn   0x00040000 /* Receive all valid packets RW 1 */
-+#define MacPromiscuousModeOff           0 /* Receive filtered packets only */
-+#define MacFilterInverse       0x00020000 /* Inverse filtering RW */
-+#define MacFilterNormal                 0 /* Normal filtering 0 */
-+#define MacBadFramesEnable     0x00010000 /* Pass bad frames RW */
-+#define MacBadFramesDisable             0 /* Do not pass bad frames 0 */
-+#define MacPerfectFilterOff    0x00008000 /* Hash filtering only RW */
-+#define MacPerfectFilterOn              0 /* Both perfect and hash filtering 0 */
-+#define MacHashFilterOn        0x00002000 /* perform hash filtering RW */
-+#define MacHashFilterOff                0 /* perfect filtering only 0 */
-+#define MacLateCollisionOn     0x00001000 /* Enable late collision control RW */
-+#define MacLateCollisionOff             0 /* Disable late collision control 0 */
-+#define MacBroadcastDisable    0x00000800 /* Disable reception of bcast frames RW */
-+#define MacBroadcastEnable              0 /* Enable broadcast frames 0 */
-+#define MacRetryDisable        0x00000400 /* Disable retransmission RW */
-+#define MacRetryEnable                  0 /* Enable retransmission 0 */
-+#define MacPadStripEnable      0x00000100 /* Pad stripping enable RW */
-+#define MacPadStripDisable              0 /* Pad stripping disable 0 */
-+#define MacBackoff                      0 /* Backoff Limit RW 00 */
-+#define MacDeferralCheckEnable 0x00000020 /* Deferral check enable RW */
-+#define MacDeferralCheckDisable         0 /* Deferral check disable 0 */
-+#define MacTxEnable            0x00000008 /* Transmitter enable RW */
-+#define MacTxDisable                    0 /* Transmitter disable 0 */
-+#define MacRxEnable            0x00000004 /* Receiver enable RW */
-+#define MacRxDisable                    0 /* Receiver disable 0 */
-+
-+
-+/**********************************************************/
-+/* MII address register layout                            */
-+/**********************************************************/
-+#define MiiDevMask   0x0000F800 /* MII device address */
-+#define MiiDevShift          11
-+#define MiiRegMask   0x000007C0 /* MII register */
-+#define MiiRegShift           6
-+#define MiiWrite     0x00000002 /* Write to register */
-+#define MiiRead               0 /* Read from register */
-+#define MiiBusy      0x00000001 /* MII interface is busy */
-+
-+/**********************************************************/
-+/* MII Data register layout                               */
-+/**********************************************************/
-+#define MiiDataMask  0x0000FFFF /* MII Data */
-+
-+/**********************************************************/
-+/* MAC flow control register layout                       */
-+/**********************************************************/
-+#define MacPauseTimeMask      0xFFFF0000  /* PAUSE TIME field in ctrl frame */
-+#define MacPauseTimeShift             15
-+#define MacControlFrameEnable 0x00000004  /* Enable pass ctrl frames to host */
-+#define MacControlFrameDisable         0  /* Do not pass ctrl frames to host */
-+#define MacFlowControlEnable  0x00000002  /* Enable flow control */
-+#define MacFlowControlDisable          0  /* Disable flow control */
-+#define MacSendPauseFrame     0x00000001  /* send pause frame */
-+
-+/**********************************************************/
-+/* DMA bus mode register layout                           */
-+/**********************************************************/
-+#define DmaRxAlign16            0x01000000 /* Force all rx buffers to align on odd hw bndry */
-+#define DmaBigEndianDes         0x00100000 /* Big endian data buffer descriptors RW */
-+#define DmaLittleEndianDesc              0 /* Little endian data descriptors */
-+#define DmaBurstLength32        0x00002000 /* Dma burst length 32 RW */
-+#define DmaBurstLength16        0x00001000 /* Dma burst length 16 */
-+#define DmaBurstLength8         0x00000800 /* Dma burst length 8 */
-+#define DmaBurstLength4         0x00000400 /* Dma burst length 4 */
-+#define DmaBurstLength2         0x00000200 /* Dma burst length 2 */
-+#define DmaBurstLength1         0x00000100 /* Dma burst length 1 */
-+#define DmaBurstLength0         0x00000000 /* Dma burst length 0 */
-+#define DmaBigEndianData        0x00000080 /* Big endian data buffers RW */
-+#define DmaLittleEndianData              0 /* Little endian data buffers 0 */
-+#define DmaDescriptorSkip16     0x00000040 /* number of dwords to skip RW */
-+#define DmaDescriptorSkip8      0x00000020 /* between two unchained descriptors */
-+#define DmaDescriptorSkip4      0x00000010
-+#define DmaDescriptorSkip2      0x00000008
-+#define DmaDescriptorSkip1      0x00000004
-+#define DmaDescriptorSkip0               0
-+#define DmaReceivePriorityOff   0x00000002 /* equal rx and tx priorities RW */
-+#define DmaReceivePriorityOn             0 /* Rx has prioryty over Tx 0 */
-+#define DmaResetOn              0x00000001 /* Reset DMA engine RW */
-+#define DmaResetOff                      0
-+
-+/**********************************************************/
-+/* DMA Status register layout                             */
-+/**********************************************************/
-+#define DmaRxAbort        0x01000000 /* receiver bus abort R 0 */
-+#define DmaTxAbort        0x00800000 /* transmitter bus abort R 0 */
-+#define DmaTxState        0x00700000 /* Transmit process state R 000 */
-+#define DmaTxStopped      0x00000000 /* Stopped */
-+#define DmaTxFetching     0x00100000 /* Running - fetching the descriptor */
-+#define DmaTxWaiting      0x00200000 /* Running - waiting for end of transmission */
-+#define DmaTxReading      0x00300000 /* Running - reading the data from memory */
-+#define DmaTxSuspended    0x00600000 /* Suspended */
-+#define DmaTxClosing      0x00700000 /* Running - closing descriptor */
-+#define DmaRxState        0x000E0000 /* Receive process state 000 */
-+#define DmaRxStopped      0x00000000 /* Stopped */
-+#define DmaRxFetching     0x00020000 /* Running - fetching the descriptor */
-+#define DmaRxChecking     0x00040000 /* Running - checking for end of packet */
-+#define DmaRxWaiting      0x00060000 /* Running - waiting for packet */
-+#define DmaRxSuspended    0x00080000 /* Suspended */
-+#define DmaRxClosing      0x000A0000 /* Running - closing descriptor */
-+#define DmaRxFlushing     0x000C0000 /* Running - flushing the current frame */
-+#define DmaRxQueuing      0x000E0000 /* Running - queuing the recieve frame into host memory */
-+#define DmaIntNormal      0x00010000 /* Normal interrupt summary RW 0 */
-+#define DmaIntAbnormal    0x00008000 /* Abnormal interrupt summary RW 0 */
-+#define DmaIntEarlyRx     0x00004000 /* Early receive interrupt (Normal) RW 0 */
-+#define DmaIntBusError    0x00002000 /* Fatal bus error (Abnormal) RW 0 */
-+#define DmaIntEarlyTx     0x00000400 /* Early transmit interrupt RW 0 */
-+#define DmaIntRxStopped   0x00000100 /* Receive process stopped (Abnormal) RW 0 */
-+#define DmaIntRxNoBuffer  0x00000080 /* Receive buffer unavailable (Abnormal) RW 0*/
-+#define DmaIntRxCompleted 0x00000040 /* Completion of frame reception(Normal) RW 0*/
-+#define DmaIntTxUnderflow 0x00000020 /* Transmit underflow (Abnormal) RW 0 */
-+#define DmaIntTxJabber    0x00000008 /* Transmit Jabber Timeout (Abnormal) RW 0 */ 
-+#define DmaIntTxNoBuffer  0x00000004 /* Transmit buffer unavailable (Normal) RW 0*/
-+#define DmaIntTxStopped   0x00000002 /* Transmit process stopped (Abnormal) RW 0 */
-+#define DmaIntTxCompleted 0x00000001 /* Transmit completed (Normal) RW 0 */
-+
-+/**********************************************************/
-+/* DMA control register layout                            */
-+/**********************************************************/
-+#define DmaStoreAndForward 0x00000000 /* Store and forward RW 0 */
-+#define DmaTxThreshCtl256  0x0000c000 /* Non-SF threshold is 256 words */
-+#define DmaTxThreshCtl128  0x00008000 /* Non-SF threshold is 128 words */
-+#define DmaTxThreshCtl064  0x00004000 /* Non-SF threshold is 64 words */
-+#define DmaTxThreshCtl032  0x00000000 /* Non-SF threshold is 32 words */
-+#define DmaTxStart         0x00002000 /* Start/Stop transmission RW 0 */
-+#define DmaTxSecondFrame   0x00000004 /* Operate on second frame RW 0 */
-+#define DmaRxStart         0x00000002 /* Start/Stop reception RW 0 */
-+
-+/**********************************************************/
-+/* DMA interrupt enable register layout                   */
-+/**********************************************************/
-+#define DmaIeNormal      DmaIntNormal      /* Normal interrupt enable RW 0 */
-+#define DmaIeAbnormal    DmaIntAbnormal    /* Abnormal interrupt enable RW 0 */
-+#define DmaIeEarlyRx     DmaIntEarlyRx     /* Early receive interrupt enable RW 0 */
-+#define DmaIeBusError    DmaIntBusError    /* Fatal bus error enable RW 0 */
-+#define DmaIeEarlyTx     DmaIntEarlyTx     /* Early transmit interrupt enable RW 0 */
-+#define DmaIeRxStopped   DmaIntRxStopped   /* Receive process stopped enable RW 0 */
-+#define DmaIeRxNoBuffer  DmaIntRxNoBuffer  /* Receive buffer unavailable enable RW 0 */
-+#define DmaIeRxCompleted DmaIntRxCompleted /* Completion of frame reception enable RW 0 */
-+#define DmaIeTxUnderflow DmaIntTxUnderflow /* Transmit underflow enable RW 0 */
-+#define DmaIeTxJabber    DmaIntTxJabber    /* Transmit jabber timeout RW 0 */
-+#define DmaIeTxNoBuffer  DmaIntTxNoBuffer  /* Transmit buffer unavailable enable RW 0 */
-+#define DmaIeTxStopped   DmaIntTxStopped   /* Transmit process stopped enable RW 0 */
-+#define DmaIeTxCompleted DmaIntTxCompleted /* Transmit completed enable RW 0 */
-+
-+/****************************************************************/
-+/* DMA Missed Frame and Buffer Overflow Counter register layout */
-+/****************************************************************/
-+#define DmaRxBufferMissedFrame  0xffff0000  /* cleared on read */
-+#define DmaMissedFrameShift             16
-+#define DmaRxBufferOverflowCnt  0x0000ffff  /* cleared on read */
-+#define DmaMissedFrameCountMask 0x0000ffff
-+
-+/**********************************************************/
-+/* DMA Engine descriptor layout                           */
-+/**********************************************************/
-+/* status word of DMA descriptor */
-+#define DescOwnByDma         0x80000000 /* Descriptor is owned by DMA engine */
-+#define DescFrameLengthMask  0x3FFF0000 /* Receive descriptor frame length */
-+#define DescFrameLengthShift         16
-+#define DescError            0x00008000 /* Error summary bit OR of following bits */
-+#define DescRxTruncated      0x00004000 /* Rx - no more descs for receive frame */
-+#define DescRxLengthError    0x00001000 /* Rx - frame size not matching with length field */
-+#define DescRxRunt           0x00000800 /* Rx - runt frame, damaged by a
-+                                           collision or term before 64 bytes */
-+#define DescRxMulticast      0x00000400 /* Rx - received frame is multicast */
-+#define DescRxFirst          0x00000200 /* Rx - first descriptor of the frame */
-+#define DescRxLast           0x00000100 /* Rx - last descriptor of the frame */
-+#define DescRxLongFrame      0x00000080 /* Rx - frame is longer than 1518 bytes */
-+#define DescRxLateColl       0x00000040 /* Rx - frame was damaged by a late collision */
-+#define DescRxFrameEther     0x00000020 /* Rx - Frame type Ethernet 802.3*/ 
-+#define DescRxMiiError       0x00000008 /* Rx - error reported by MII interface */
-+#define DescRxDribbling      0x00000004 /* Rx - frame contains noninteger multiple of 8 bits */
-+#define DescRxCrc            0x00000002 /* Rx - CRC error */
-+#define DescTxTimeout        0x00004000 /* Tx - Transmit jabber timeout */
-+#define DescTxLostCarrier    0x00000800 /* Tx - carrier lost during tramsmission */
-+#define DescTxNoCarrier      0x00000400 /* Tx - no carrier signal from tranceiver */
-+#define DescTxLateCollision  0x00000200 /* Tx - transmission aborted due to collision */
-+#define DescTxExcCollisions  0x00000100 /* Tx - transmission aborted after 16 collisions */
-+#define DescTxHeartbeatFail  0x00000080 /* Tx - heartbeat collision check failure */
-+#define DescTxCollMask       0x00000078 /* Tx - Collision count */
-+#define DescTxCollShift               3
-+#define DescTxExcDeferral    0x00000004 /* Tx - excessive deferral */
-+#define DescTxUnderflow      0x00000002 /* Tx - late data arrival from memory */
-+#define DescTxDeferred       0x00000001 /* Tx - frame transmision deferred */
-+
-+/* length word of DMA descriptor */
-+#define DescTxIntEnable      0x80000000 /* Tx - interrupt on completion */
-+#define DescTxLast           0x40000000 /* Tx - Last segment of the frame */
-+#define DescTxFirst          0x20000000 /* Tx - First segment of the frame */
-+#define DescTxDisableCrc     0x04000000 /* Tx - Add CRC disabled (first segment only) */
-+#define DescEndOfRing        0x02000000 /* End of descriptors ring */
-+#define DescChain            0x01000000 /* Second buffer address is chain address */
-+#define DescTxDisablePadd    0x00800000 /* disable padding */
-+#define DescSize2Mask        0x003FF800 /* Buffer 2 size */
-+#define DescSize2Shift               11
-+#define DescSize1Mask        0x000007FF /* Buffer 1 size */
-+#define DescSize1Shift                0
-+
-+/**********************************************************/
-+/* Initial register values                                */
-+/**********************************************************/
-+/* Full-duplex mode with perfect filter on */
-+#define MacControlInitFdx \
-+       ( MacFilterOn \
-+       | MacLittleEndian \
-+       | MacHeartBeatOn \
-+       | MacSelectMii \
-+       | MacEnableRxOwn \
-+       | MacLoopbackOff \
-+       | MacFullDuplex \
-+       | MacMulticastFilterOn \
-+       | MacPromiscuousModeOff \
-+       | MacFilterNormal \
-+       | MacBadFramesDisable \
-+       | MacPerfectFilterOn \
-+       | MacHashFilterOff \
-+       | MacLateCollisionOff \
-+       | MacBroadcastEnable \
-+       | MacRetryEnable \
-+       | MacPadStripDisable \
-+       | MacDeferralCheckDisable \
-+       | MacTxEnable \
-+       | MacRxEnable)
-+
-+/* Full-duplex mode */
-+#define MacFlowControlInitFdx \
-+        ( MacControlFrameDisable \
-+        | MacFlowControlEnable)
-+
-+/* Half-duplex mode with perfect filter on */
-+#define MacControlInitHdx \
-+       ( MacFilterOn \
-+       | MacLittleEndian \
-+       | MacHeartBeatOn \
-+       | MacSelectMii \
-+       | MacDisableRxOwn \
-+       | MacLoopbackOff \
-+       | MacHalfDuplex \
-+       | MacMulticastFilterOn \
-+       | MacPromiscuousModeOff \
-+       | MacFilterNormal \
-+       | MacBadFramesDisable \
-+       | MacPerfectFilterOn \
-+       | MacHashFilterOff \
-+       | MacLateCollisionOff \
-+       | MacBroadcastEnable \
-+       | MacRetryEnable \
-+       | MacPadStripDisable \
-+       | MacDeferralCheckDisable \
-+       | MacTxEnable \
-+       | MacRxEnable)
-+
-+/* Half-duplex mode */
-+#define MacFlowControlInitHdx \
-+        ( MacControlFrameDisable \
-+        | MacFlowControlDisable)
-+
-+/* Bus Mode Rx odd half word align */
-+#define DmaBusModeInit  \
-+       ( DmaLittleEndianDesc \
-+       | DmaRxAlign16 \
-+       | DmaBurstLength32 \
-+       | DmaBigEndianData \
-+       | DmaDescriptorSkip1 \
-+       | DmaReceivePriorityOn \
-+       | DmaResetOff)
-+
-+#define DmaControlInit (DmaStoreAndForward)
-+
-+/* Interrupt groups */
-+#define DmaIntEnable \
-+     ( DmaIeNormal \
-+     | DmaIeAbnormal \
-+     | DmaIntBusError \
-+     | DmaIntRxStopped \
-+     | DmaIntRxNoBuffer \
-+     | DmaIntRxCompleted \
-+     | DmaIntTxUnderflow \
-+     | DmaIntTxStopped)
-+
-+#define DmaIntDisable 0
-+
-+#define DmaAllIntCauseMask \
-+      ( DmaIeNormal  \
-+      | DmaIeAbnormal  \
-+      | DmaIntEarlyRx  \
-+      | DmaIntBusError \
-+      | DmaIntEarlyTx  \
-+      | DmaIntRxStopped \
-+      | DmaIntRxNoBuffer \
-+      | DmaIntRxCompleted \
-+      | DmaIntTxUnderflow \
-+      | DmaIntTxJabber \
-+      | DmaIntTxNoBuffer \
-+      | DmaIntTxStopped \
-+      | DmaIntTxCompleted)
-+
-+#define UnhandledIntrMask    \
-+       (DmaAllIntCauseMask   \
-+       & ~(DmaIntRxNoBuffer  \
-+         | DmaIntTxStopped   \
-+         | DmaIntTxJabber    \
-+         | DmaIntTxUnderflow \
-+         | DmaIntBusError    \
-+         | DmaIntRxCompleted ))
-+
-+#define DescRxErrors    \
-+      (DescRxTruncated  \
-+     | DescRxRunt       \
-+     | DescRxLateColl   \
-+     | DescRxMiiError   \
-+     | DescRxCrc)
-+
-+#define DescTxErrors        \
-+     ( DescTxTimeout        \
-+     | DescTxLateCollision  \
-+     | DescTxExcCollisions  \
-+     | DescTxExcDeferral    \
-+     | DescTxUnderflow)
-+
-+/**********************************************************/
-+/* Descriptor Layout                                      */
-+/**********************************************************/
-+#define AE531X_DESC_STATUS     0x00 /* Status offset */
-+#define AE531X_DESC_CTRLEN     0x04 /* Control and Length offset */ 
-+#define AE531X_DESC_BUFPTR     0x08 /* Buffer pointer offset */
-+#define AE531X_DESC_LNKBUF     0x0c /* Link field offset, or ptr to 2nd buf */
-+#define AE531X_DESC_SWPTR      0x10 /* OS-Dependent software pointer */
-+
-+#define AE531X_DESC_SIZE       0x10 /* 4 words, 16 bytes */
-+#define AE531X_QUEUE_ELE_SIZE  0x14 /* with software pointer extension */
-+
-+/* Accessors to the dma descriptor fields */
-+#define AE531X_DESC_STATUS_GET(ptr) \
-+    *(volatile UINT32 *)((UINT32)(ptr) + AE531X_DESC_STATUS)
-+
-+#define AE531X_DESC_STATUS_SET(ptr, val)  \
-+    AE531X_DESC_STATUS_GET(ptr) = (val)
-+
-+#define AE531X_DESC_CTRLEN_GET(ptr) \
-+    *(volatile UINT32 *)((UINT32)ptr + AE531X_DESC_CTRLEN)
-+
-+#define AE531X_DESC_CTRLEN_SET(ptr, val)  \
-+    AE531X_DESC_CTRLEN_GET(ptr) = (val)
-+
-+#define AE531X_DESC_BUFPTR_GET(ptr) \
-+    *(volatile UINT32 *)((UINT32)ptr + AE531X_DESC_BUFPTR)
-+
-+#define AE531X_DESC_BUFPTR_SET(ptr,val)  \
-+    AE531X_DESC_BUFPTR_GET(ptr) = (UINT32)(val)
-+
-+#define AE531X_DESC_LNKBUF_GET(ptr)  \
-+    *(volatile UINT32 *)((UINT32)ptr + AE531X_DESC_LNKBUF)
-+
-+#define AE531X_DESC_LNKBUF_SET(ptr, val)  \
-+    AE531X_DESC_LNKBUF_GET(ptr) = (val)
-+
-+#define AE531X_DESC_SWPTR_GET(ptr) \
-+    (void *)(*(volatile UINT32 *) ((UINT32)ptr + AE531X_DESC_SWPTR))
-+
-+#define AE531X_DESC_SWPTR_SET(ptr,val)   \
-+    AE531X_DESC_SWPTR_GET(ptr) = (void *)(val)
-+
-+/* Get size of Rx data from desc, in bytes */
-+#define AE531X_DESC_STATUS_RX_SIZE(x) \
-+        (((x) & DescFrameLengthMask) >> DescFrameLengthShift)
-+
-+#endif /* _AE531XREG_H_ */
-diff -urN linux-mips-orig/drivers/net/ath/ar531x.h linux-mips-new/drivers/net/ath/ar531x.h
---- linux-mips-orig/drivers/net/ath/ar531x.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/ar531x.h	2005-12-31 12:33:57.676538368 +0000
-@@ -0,0 +1,1124 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+#ifndef AR531X_H
-+#define AR531X_H 1
-+
-+
-+#ifndef CONFIG_AR5315
-+
-+#include <asm/addrspace.h>
-+
-+/* Address Map */
-+#define AR531X_WLAN0            0x18000000
-+#define AR531X_WLAN1            0x18500000
-+#define AR531X_ENET0            0x18100000
-+#define AR531X_ENET1            0x18200000
-+#define AR531X_SDRAMCTL         0x18300000
-+#define AR531X_FLASHCTL         0x18400000
-+#define AR531X_APBBASE		0x1c000000
-+#define AR531X_FLASH            0x1e000000
-+
-+/*
-+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
-+ * should be considered available.  The AR5312 supports 2 enet MACS,
-+ * even though many reference boards only actually use 1 of them
-+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
-+ * The AR2312 supports 1 enet MAC.
-+ */
-+#define AR531X_NUM_ENET_MAC             2
-+
-+/*
-+ * Need these defines to determine true number of ethernet MACs
-+ */
-+#define AR5212_AR5312_REV2      0x0052          /* AR5312 WMAC (AP31) */
-+#define AR5212_AR5312_REV7      0x0057          /* AR5312 WMAC (AP30-040) */
-+#define AR5212_AR2313_REV8      0x0058          /* AR2313 WMAC (AP43-030) */
-+#define AR531X_RADIO_MASK_OFF  0xc8
-+#define AR531X_RADIO0_MASK     0x0003
-+#define AR531X_RADIO1_MASK     0x000c
-+#define AR531X_RADIO1_S        2 
-+
-+/*
-+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
-+ * should be considered available.
-+ */
-+#define AR531X_NUM_WMAC                 2
-+
-+/* Reset/Timer Block Address Map */
-+#define AR531X_RESETTMR		(AR531X_APBBASE  + 0x3000)
-+#define AR531X_TIMER		(AR531X_RESETTMR + 0x0000) /* countdown timer */
-+#define AR531X_WD_CTRL          (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
-+#define AR531X_WD_TIMER         (AR531X_RESETTMR + 0x000c) /* watchdog timer */
-+#define AR531X_ISR		(AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
-+#define AR531X_IMR		(AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
-+#define AR531X_RESET		(AR531X_RESETTMR + 0x0020)
-+#define AR5312_CLOCKCTL1	(AR531X_RESETTMR + 0x0064)
-+#define AR5312_SCRATCH   	(AR531X_RESETTMR + 0x006c)
-+#define AR531X_PROCADDR		(AR531X_RESETTMR + 0x0070)
-+#define AR531X_PROC1		(AR531X_RESETTMR + 0x0074)
-+#define AR531X_DMAADDR		(AR531X_RESETTMR + 0x0078)
-+#define AR531X_DMA1		(AR531X_RESETTMR + 0x007c)
-+#define AR531X_ENABLE           (AR531X_RESETTMR + 0x0080) /* interface enb */
-+#define AR531X_REV		(AR531X_RESETTMR + 0x0090) /* revision */
-+
-+/* AR531X_WD_CTRL register bit field definitions */
-+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
-+#define AR531X_WD_CTRL_NMI               0x0001
-+#define AR531X_WD_CTRL_RESET             0x0002
-+
-+/* AR531X_ISR register bit field definitions */
-+#define AR531X_ISR_NONE		0x0000
-+#define AR531X_ISR_TIMER	0x0001
-+#define AR531X_ISR_AHBPROC	0x0002
-+#define AR531X_ISR_AHBDMA	0x0004
-+#define AR531X_ISR_GPIO		0x0008
-+#define AR531X_ISR_UART0	0x0010
-+#define AR531X_ISR_UART0DMA	0x0020
-+#define AR531X_ISR_WD		0x0040
-+#define AR531X_ISR_LOCAL	0x0080
-+
-+/* AR531X_RESET register bit field definitions */
-+#define AR531X_RESET_SYSTEM     0x00000001  /* cold reset full system */
-+#define AR531X_RESET_PROC       0x00000002  /* cold reset MIPS core */
-+#define AR531X_RESET_WLAN0      0x00000004  /* cold reset WLAN MAC and BB */
-+#define AR531X_RESET_EPHY0      0x00000008  /* cold reset ENET0 phy */
-+#define AR531X_RESET_EPHY1      0x00000010  /* cold reset ENET1 phy */
-+#define AR531X_RESET_ENET0      0x00000020  /* cold reset ENET0 mac */
-+#define AR531X_RESET_ENET1      0x00000040  /* cold reset ENET1 mac */
-+#define AR531X_RESET_UART0      0x00000100  /* cold reset UART0 (high speed) */
-+#define AR531X_RESET_WLAN1      0x00000200  /* cold reset WLAN MAC/BB */
-+#define AR531X_RESET_APB        0x00000400  /* cold reset APB (ar5312) */
-+#define AR531X_RESET_WARM_PROC  0x00001000  /* warm reset MIPS core */
-+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000  /* warm reset WLAN0 MAC */
-+#define AR531X_RESET_WARM_WLAN0_BB  0x00004000  /* warm reset WLAN0 BaseBand */
-+#define AR531X_RESET_NMI        0x00010000  /* send an NMI to the processor */
-+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000  /* warm reset WLAN1 mac */
-+#define AR531X_RESET_WARM_WLAN1_BB  0x00040000  /* warm reset WLAN1 baseband */
-+#define AR531X_RESET_LOCAL_BUS  0x00080000  /* reset local bus */
-+#define AR531X_RESET_WDOG       0x00100000  /* last reset was a watchdog */
-+
-+#define AR531X_RESET_WMAC0_BITS \
-+        AR531X_RESET_WLAN0 |\
-+        AR531X_RESET_WARM_WLAN0_MAC |\
-+        AR531X_RESET_WARM_WLAN0_BB
-+
-+#define AR531X_RESERT_WMAC1_BITS \
-+        AR531X_RESET_WLAN1 |\
-+        AR531X_RESET_WARM_WLAN1_MAC |\
-+        AR531X_RESET_WARM_WLAN1_BB
-+
-+/* AR5312_CLOCKCTL1 register bit field definitions */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK    0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT            4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK   0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT           8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK      0x00010000
-+
-+/* Valid for AR5312 and AR2312 */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK    0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT            4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK   0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT           8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK      0x00010000
-+
-+/* Valid for AR2313 */
-+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK    0x00003000
-+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT           12
-+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK   0x001f0000
-+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT          16
-+#define AR2313_CLOCKCTL1_DOUBLER_MASK      0x00000000
-+
-+
-+/* AR531X_ENABLE register bit field definitions */
-+#define AR531X_ENABLE_WLAN0              0x0001
-+#define AR531X_ENABLE_ENET0              0x0002
-+#define AR531X_ENABLE_ENET1              0x0004
-+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008   /* UART, and WLAN1 PIOs */
-+#define AR531X_ENABLE_WLAN1_DMA          0x0010   /* WLAN1 DMAs */
-+#define AR531X_ENABLE_WLAN1 \
-+            (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
-+
-+/* AR531X_REV register bit field definitions */
-+#define AR531X_REV_WMAC_MAJ    0xf000
-+#define AR531X_REV_WMAC_MAJ_S  12
-+#define AR531X_REV_WMAC_MIN    0x0f00
-+#define AR531X_REV_WMAC_MIN_S  8
-+#define AR531X_REV_MAJ         0x00f0
-+#define AR531X_REV_MAJ_S       4
-+#define AR531X_REV_MIN         0x000f
-+#define AR531X_REV_MIN_S       0
-+#define AR531X_REV_CHIP        (REV_MAJ|REV_MIN)
-+
-+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define AR531X_REV_MAJ_AR5312          0x4
-+#define AR531X_REV_MAJ_AR2313          0x5
-+
-+/* Minor revision numbers, bits 3..0 of Revision ID register */
-+#define AR5312_REV_MIN_DUAL     0x0     /* Dual WLAN version */
-+#define AR5312_REV_MIN_SINGLE   0x1     /* Single WLAN version */
-+
-+/* AR531X_FLASHCTL register bit field definitions */
-+#define FLASHCTL_IDCY   0x0000000f      /* Idle cycle turn around time */
-+#define FLASHCTL_IDCY_S 0
-+#define FLASHCTL_WST1   0x000003e0      /* Wait state 1 */
-+#define FLASHCTL_WST1_S 5
-+#define FLASHCTL_RBLE   0x00000400      /* Read byte lane enable */
-+#define FLASHCTL_WST2   0x0000f800      /* Wait state 2 */
-+#define FLASHCTL_WST2_S 11
-+#define FLASHCTL_AC     0x00070000      /* Flash address check (added) */
-+#define FLASHCTL_AC_S   16
-+#define FLASHCTL_AC_128K 0x00000000
-+#define FLASHCTL_AC_256K 0x00010000
-+#define FLASHCTL_AC_512K 0x00020000
-+#define FLASHCTL_AC_1M   0x00030000
-+#define FLASHCTL_AC_2M   0x00040000
-+#define FLASHCTL_AC_4M   0x00050000
-+#define FLASHCTL_AC_8M   0x00060000
-+#define FLASHCTL_AC_RES  0x00070000     /* 16MB is not supported */
-+#define FLASHCTL_E      0x00080000      /* Flash bank enable (added) */
-+#define FLASHCTL_BUSERR 0x01000000      /* Bus transfer error status flag */
-+#define FLASHCTL_WPERR  0x02000000      /* Write protect error status flag */
-+#define FLASHCTL_WP     0x04000000      /* Write protect */
-+#define FLASHCTL_BM     0x08000000      /* Burst mode */
-+#define FLASHCTL_MW     0x30000000      /* Memory width */
-+#define FLASHCTL_MWx8   0x00000000      /* Memory width x8 */
-+#define FLASHCTL_MWx16  0x10000000      /* Memory width x16 */
-+#define FLASHCTL_MWx32  0x20000000      /* Memory width x32 (not supported) */
-+#define FLASHCTL_ATNR   0x00000000      /* Access type == no retry */
-+#define FLASHCTL_ATR    0x80000000      /* Access type == retry every */
-+#define FLASHCTL_ATR4   0xc0000000      /* Access type == retry every 4 */
-+
-+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices.  */
-+#define AR531X_FLASHCTL0        (AR531X_FLASHCTL + 0x00)
-+#define AR531X_FLASHCTL1        (AR531X_FLASHCTL + 0x04)
-+#define AR531X_FLASHCTL2        (AR531X_FLASHCTL + 0x08)
-+
-+/* ARM SDRAM Controller -- just enough to determine memory size */
-+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
-+#define MEM_CFG1_AC0    0x00000700      /* bank 0: SDRAM addr check (added) */
-+#define MEM_CFG1_AC0_S  8
-+#define MEM_CFG1_AC1    0x00007000      /* bank 1: SDRAM addr check (added) */
-+#define MEM_CFG1_AC1_S  12
-+
-+/* GPIO Address Map */
-+#define AR531X_GPIO         (AR531X_APBBASE  + 0x2000)
-+#define AR531X_GPIO_DO      (AR531X_GPIO + 0x00)        /* output register */
-+#define AR531X_GPIO_DI      (AR531X_GPIO + 0x04)        /* intput register */
-+#define AR531X_GPIO_CR      (AR531X_GPIO + 0x08)        /* control register */
-+
-+/* GPIO Control Register bit field definitions */
-+#define GPIO_CR_M(x)    (1 << (x))                      /* mask for i/o */
-+#define GPIO_CR_O(x)    (0 << (x))                      /* mask for output */
-+#define GPIO_CR_I(x)    (1 << (x))                      /* mask for input */
-+#define GPIO_CR_INT(x)  (1 << ((x)+8))                  /* mask for interrupt */
-+#define GPIO_CR_UART(x) (1 << ((x)+16))                 /* uart multiplex */
-+
-+
-+typedef unsigned int AR531X_REG;
-+
-+#define sysRegRead(phys)	\
-+	(*(volatile AR531X_REG *)PHYS_TO_K1(phys))
-+
-+#define sysRegWrite(phys, val)	\
-+	((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val))
-+
-+
-+/*
-+ * This is board-specific data that is stored in a "fixed" location in flash.
-+ * It is shared across operating systems, so it should not be changed lightly.
-+ * The main reason we need it is in order to extract the ethernet MAC
-+ * address(es).
-+ */
-+struct ar531x_boarddata {
-+    u32 magic;                       /* board data is valid */
-+#define AR531X_BD_MAGIC 0x35333131   /* "5311", for all 531x platforms */
-+    u16 cksum;                       /* checksum (starting with BD_REV 2) */
-+    u16 rev;                         /* revision of this struct */
-+#define BD_REV  4
-+    char   boardName[64];            /* Name of board */
-+    u16 major;                       /* Board major number */
-+    u16 minor;                       /* Board minor number */
-+    u32 config;                      /* Board configuration */
-+#define BD_ENET0        0x00000001   /* ENET0 is stuffed */
-+#define BD_ENET1        0x00000002   /* ENET1 is stuffed */
-+#define BD_UART1        0x00000004   /* UART1 is stuffed */
-+#define BD_UART0        0x00000008   /* UART0 is stuffed (dma) */
-+#define BD_RSTFACTORY   0x00000010   /* Reset factory defaults stuffed */
-+#define BD_SYSLED       0x00000020   /* System LED stuffed */
-+#define BD_EXTUARTCLK   0x00000040   /* External UART clock */
-+#define BD_CPUFREQ      0x00000080   /* cpu freq is valid in nvram */
-+#define BD_SYSFREQ      0x00000100   /* sys freq is set in nvram */
-+#define BD_WLAN0        0x00000200   /* Enable WLAN0 */
-+#define BD_MEMCAP       0x00000400   /* CAP SDRAM @ memCap for testing */
-+#define BD_DISWATCHDOG  0x00000800   /* disable system watchdog */
-+#define BD_WLAN1        0x00001000   /* Enable WLAN1 (ar5212) */
-+#define BD_ISCASPER     0x00002000   /* FLAG for AR2312 */
-+#define BD_WLAN0_2G_EN  0x00004000   /* FLAG for radio0_2G */
-+#define BD_WLAN0_5G_EN  0x00008000   /* FLAG for radio0_2G */
-+#define BD_WLAN1_2G_EN  0x00020000   /* FLAG for radio0_2G */
-+#define BD_WLAN1_5G_EN  0x00040000   /* FLAG for radio0_2G */
-+    u16 resetConfigGpio;             /* Reset factory GPIO pin */
-+    u16 sysLedGpio;                  /* System LED GPIO pin */
-+
-+    u32 cpuFreq;                     /* CPU core frequency in Hz */
-+    u32 sysFreq;                     /* System frequency in Hz */
-+    u32 cntFreq;                     /* Calculated C0_COUNT frequency */
-+
-+    u8  wlan0Mac[6];
-+    u8  enet0Mac[6];
-+    u8  enet1Mac[6];
-+
-+    u16 pciId;                       /* Pseudo PCIID for common code */
-+    u16 memCap;                      /* cap bank1 in MB */
-+
-+    /* version 3 */
-+    u8  wlan1Mac[6];                 /* (ar5212) */
-+};
-+
-+#else
-+
-+/*
-+ * Add support for Cobra
-+ *
-+ * AR531XPLUSreg.h Register definitions for Atheros AR5311 and AR5312 chipsets.
-+ *   - WLAN registers are listed in
-+ *         hal/ar5211/ar5211Reg.h
-+ *         hal/ar5212/ar5212Reg.h
-+ *   - Ethernet registers are listed in ar531xenet.h
-+ *   - Standard UART is 16550 compatible.
-+ */
-+
-+
-+/*
-+ * Address map
-+ */
-+#define AR531XPLUS_SDRAM0           0x00000000      /* DRAM */
-+#define AR531XPLUS_SPI_READ         0x08000000      /* SPI FLASH */
-+#define AR531XPLUS_WLAN0            0xB0000000      /* Wireless MMR */
-+#define AR531XPLUS_PCI              0xB0100000      /* PCI MMR */
-+#define AR531XPLUS_SDRAMCTL         0xB0300000      /* SDRAM MMR */
-+#define AR531XPLUS_LOCAL            0xB0400000      /* LOCAL BUS MMR */
-+#define AR531XPLUS_ENET0            0xB0500000      /* ETHERNET MMR */
-+#define AR531XPLUS_DSLBASE          0xB1000000      /* RESET CONTROL MMR */
-+#define AR531XPLUS_UART0            0xB1100003      /* UART MMR */
-+#define AR531XPLUS_SPI              0xB1300000      /* SPI FLASH MMR */
-+#define AR531XPLUS_FLASHBT          0xBfc00000      /* ro boot alias to FLASH */
-+#define AR531XPLUS_RAM1             0x40000000      /* ram alias */
-+#define AR531XPLUS_PCIEXT           0x80000000      /* pci external */
-+#define AR531XPLUS_RAM2             0xc0000000      /* ram alias */
-+#define AR531XPLUS_RAM3             0xe0000000      /* ram alias */
-+
-+#define AR531X_ENET0  AR531XPLUS_ENET0       
-+#define AR531X_ENET1  0 
-+/*
-+ * Reset Register
-+ */
-+#define AR531XPLUS_COLD_RESET       (AR531XPLUS_DSLBASE + 0x0000)
-+
-+/* Cold Reset */
-+#define RESET_COLD_AHB              0x00000001
-+#define RESET_COLD_APB              0x00000002
-+#define RESET_COLD_CPU              0x00000004
-+#define RESET_COLD_CPUWARM          0x00000008
-+#define RESET_SYSTEM                (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB)      /* full system */
-+
-+/* Warm Reset */
-+
-+#define AR531XPLUS_RESET            (AR531XPLUS_DSLBASE + 0x0004)
-+#define AR531X_RESET AR531XPLUS_RESET
-+
-+#define RESET_WARM_WLAN0_MAC        0x00000001      /* warm reset WLAN0 MAC */
-+#define RESET_WARM_WLAN0_BB         0x00000002      /* warm reset WLAN0 BaseBand */
-+#define RESET_MPEGTS_RSVD           0x00000004      /* warm reset MPEG-TS */
-+#define RESET_PCIDMA                0x00000008      /* warm reset PCI ahb/dma */
-+#define RESET_MEMCTL                0x00000010      /* warm reset memory controller */
-+#define RESET_LOCAL                 0x00000020      /* warm reset local bus */
-+#define RESET_I2C_RSVD              0x00000040      /* warm reset I2C bus */
-+#define RESET_SPI                   0x00000080      /* warm reset SPI interface */
-+#define RESET_UART0                 0x00000100      /* warm reset UART0 */
-+#define RESET_IR_RSVD               0x00000200      /* warm reset IR interface */
-+#define RESET_EPHY0                 0x00000400      /* cold reset ENET0 phy */
-+#define RESET_ENET0                 0x00000800      /* cold reset ENET0 mac */
-+
-+#define AR531X_RESET_ENET0 RESET_ENET0
-+#define AR531X_RESET_EPHY0 RESET_EPHY0
-+#define AR531X_RESET_ENET1 0
-+#define AR531X_RESET_EPHY1 0
-+
-+/*
-+ * AHB master arbitration control
-+ */
-+#define AR531XPLUS_AHB_ARB_CTL      (AR531XPLUS_DSLBASE + 0x0008)
-+
-+#define ARB_CPU                     0x00000001      /* CPU, default */
-+#define ARB_WLAN                    0x00000002      /* WLAN */
-+#define ARB_MPEGTS_RSVD             0x00000004      /* MPEG-TS */
-+#define ARB_LOCAL                   0x00000008      /* LOCAL */
-+#define ARB_PCI                     0x00000010      /* PCI */
-+#define ARB_ETHERNET                0x00000020      /* Ethernet */
-+#define ARB_RETRY                   0x00000100      /* retry policy, debug only */
-+
-+/*
-+ * Config Register
-+ */
-+#define AR531XPLUS_ENDIAN_CTL       (AR531XPLUS_DSLBASE + 0x000c)
-+
-+#define CONFIG_AHB                  0x00000001      /* EC - AHB bridge endianess */
-+#define CONFIG_WLAN                 0x00000002      /* WLAN byteswap */
-+#define CONFIG_MPEGTS_RSVD          0x00000004      /* MPEG-TS byteswap */
-+#define CONFIG_PCI                  0x00000008      /* PCI byteswap */
-+#define CONFIG_MEMCTL               0x00000010      /* Memory controller endianess */
-+#define CONFIG_LOCAL                0x00000020      /* Local bus byteswap */
-+#define CONFIG_ETHERNET             0x00000040      /* Ethernet byteswap */
-+
-+#define CONFIG_MERGE                0x00000200      /* CPU write buffer merge */
-+#define CONFIG_CPU                  0x00000400      /* CPU big endian */
-+#define CONFIG_PCIAHB               0x00000800
-+#define CONFIG_PCIAHB_BRIDGE        0x00001000
-+#define CONFIG_SPI                  0x00008000      /* SPI byteswap */
-+#define CONFIG_CPU_DRAM             0x00010000
-+#define CONFIG_CPU_PCI              0x00020000
-+#define CONFIG_CPU_MMR              0x00040000
-+#define CONFIG_BIG                  0x00000400      
-+
-+
-+/*
-+ * NMI control
-+ */
-+#define AR531XPLUS_NMI_CTL          (AR531XPLUS_DSLBASE + 0x0010)
-+
-+#define NMI_EN  1
-+
-+/*
-+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
-+ */
-+#define AR531XPLUS_SREV             (AR531XPLUS_DSLBASE + 0x0014)
-+
-+#define AR531X_REV  AR531XPLUS_SREV
-+
-+#define REV_MAJ                     0x00f0
-+#define REV_MAJ_S                   4
-+#define REV_MIN                     0x000f
-+#define REV_MIN_S                   0
-+#define REV_CHIP                    (REV_MAJ|REV_MIN)
-+
-+#define AR531X_REV_MAJ REV_MAJ
-+#define AR531X_REV_MAJ_S REV_MAJ_S
-+#define AR531X_REV_MIN REV_MIN 
-+#define AR531X_REV_MIN_S REV_MIN_S 
-+#define REV_CHIP                    (REV_MAJ|REV_MIN)
-+/*
-+ * Need these defines to determine true number of ethernet MACs
-+ */
-+#define AR5212_AR5312_REV2      0x0052          /* AR5312 WMAC (AP31) */
-+#define AR5212_AR5312_REV7      0x0057          /* AR5312 WMAC (AP30-040) */
-+#define AR5212_AR2313_REV8      0x0058          /* AR2313 WMAC (AP43-030) */
-+#define AR531X_RADIO_MASK_OFF  0xc8
-+#define AR531X_RADIO0_MASK     0x0003
-+#define AR531X_RADIO1_MASK     0x000c
-+#define AR531X_RADIO1_S        2 
-+
-+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define AR531X_REV_MAJ_AR5312          0x4
-+#define AR531X_REV_MAJ_AR2313          0x5
-+
-+/*
-+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
-+ * should be considered available.  The AR5312 supports 2 enet MACS,
-+ * even though many reference boards only actually use 1 of them
-+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
-+ * The AR2312 supports 1 enet MAC.
-+ */
-+#define AR531X_NUM_ENET_MAC             1
-+
-+/*
-+ * Interface Enable
-+ */
-+#define AR531XPLUS_IF_CTL           (AR531XPLUS_DSLBASE + 0x0018)
-+
-+#define IF_MASK                     0x00000007
-+#define IF_DISABLED                 0
-+#define IF_PCI                      1
-+#define IF_TS_LOCAL                 2
-+#define IF_ALL                      3   /* only for emulation with separate pins */
-+#define IF_LOCAL_HOST               0x00000008
-+#define IF_PCI_HOST                 0x00000010
-+#define IF_PCI_INTR                 0x00000020
-+#define IF_PCI_CLK_MASK             0x00030000
-+#define IF_PCI_CLK_INPUT            0 
-+#define IF_PCI_CLK_OUTPUT_LOW       1
-+#define IF_PCI_CLK_OUTPUT_CLK       2
-+#define IF_PCI_CLK_OUTPUT_HIGH      3
-+#define IF_PCI_CLK_SHIFT            16 
-+ 
-+                
-+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define REV_MAJ_AR5311              0x01
-+#define REV_MAJ_AR5312              0x04
-+#define REV_MAJ_AR5315              0x0B
-+
-+/*
-+ * APB Interrupt control
-+ */
-+
-+#define AR531XPLUS_ISR              (AR531XPLUS_DSLBASE + 0x0020)
-+#define AR531XPLUS_IMR              (AR531XPLUS_DSLBASE + 0x0024)
-+#define AR531XPLUS_GISR             (AR531XPLUS_DSLBASE + 0x0028)
-+
-+#define ISR_UART0                   0x0001           /* high speed UART */
-+#define ISR_I2C_RSVD                0x0002           /* I2C bus */
-+#define ISR_SPI                     0x0004           /* SPI bus */
-+#define ISR_AHB                     0x0008           /* AHB error */
-+#define ISR_APB                     0x0010           /* APB error */
-+#define ISR_TIMER                   0x0020           /* timer */
-+#define ISR_GPIO                    0x0040           /* GPIO */
-+#define ISR_WD                      0x0080           /* watchdog */
-+#define ISR_IR_RSVD                 0x0100           /* IR */
-+                                
-+#define IMR_UART0                   ISR_UART0
-+#define IMR_I2C_RSVD                ISR_I2C_RSVD
-+#define IMR_SPI                     ISR_SPI
-+#define IMR_AHB                     ISR_AHB
-+#define IMR_APB                     ISR_APB
-+#define IMR_TIMER                   ISR_TIMER
-+#define IMR_GPIO                    ISR_GPIO
-+#define IMR_WD                      ISR_WD
-+#define IMR_IR_RSVD                 ISR_IR_RSVD
-+
-+#define GISR_MISC                   0x0001
-+#define GISR_WLAN0                  0x0002
-+#define GISR_MPEGTS_RSVD            0x0004
-+#define GISR_LOCALPCI               0x0008
-+#define GISR_WMACPOLL               0x0010
-+#define GISR_TIMER                  0x0020
-+#define GISR_ETHERNET               0x0040
-+
-+/*
-+ * Interrupt routing from IO to the processor IP bits
-+ * Define our inter mask and level
-+ */
-+#define AR531XPLUS_INTR_MISCIO      SR_IBIT3
-+#define AR531XPLUS_INTR_WLAN0       SR_IBIT4
-+#define AR531XPLUS_INTR_ENET0       SR_IBIT5
-+#define AR531XPLUS_INTR_LOCALPCI    SR_IBIT6
-+#define AR531XPLUS_INTR_WMACPOLL    SR_IBIT7
-+#define AR531XPLUS_INTR_COMPARE     SR_IBIT8
-+
-+/*
-+ * Timers
-+ */
-+#define AR531XPLUS_TIMER            (AR531XPLUS_DSLBASE + 0x0030)
-+#define AR531XPLUS_RELOAD           (AR531XPLUS_DSLBASE + 0x0034)
-+#define AR531XPLUS_WD               (AR531XPLUS_DSLBASE + 0x0038)
-+#define AR531XPLUS_WDC              (AR531XPLUS_DSLBASE + 0x003c)
-+
-+#define WDC_RESET                   0x00000002               /* reset on watchdog */
-+#define WDC_NMI                     0x00000001               /* NMI on watchdog */
-+#define WDC_IGNORE_EXPIRATION       0x00000000
-+
-+/*
-+ * Interface Debug
-+ */
-+#define AR531X_FLASHDBG             (AR531X_RESETTMR + 0x0040)
-+#define AR531X_MIIDBG               (AR531X_RESETTMR + 0x0044)
-+
-+
-+/*
-+ * CPU Performance Counters
-+ */
-+#define AR531XPLUS_PERFCNT0         (AR531XPLUS_DSLBASE + 0x0048)
-+#define AR531XPLUS_PERFCNT1         (AR531XPLUS_DSLBASE + 0x004c)
-+
-+#define PERF_DATAHIT                0x0001  /* Count Data Cache Hits */
-+#define PERF_DATAMISS               0x0002  /* Count Data Cache Misses */
-+#define PERF_INSTHIT                0x0004  /* Count Instruction Cache Hits */
-+#define PERF_INSTMISS               0x0008  /* Count Instruction Cache Misses */
-+#define PERF_ACTIVE                 0x0010  /* Count Active Processor Cycles */
-+#define PERF_WBHIT                  0x0020  /* Count CPU Write Buffer Hits */
-+#define PERF_WBMISS                 0x0040  /* Count CPU Write Buffer Misses */
-+                                
-+#define PERF_EB_ARDY                0x0001  /* Count EB_ARdy signal */
-+#define PERF_EB_AVALID              0x0002  /* Count EB_AValid signal */
-+#define PERF_EB_WDRDY               0x0004  /* Count EB_WDRdy signal */
-+#define PERF_EB_RDVAL               0x0008  /* Count EB_RdVal signal */
-+#define PERF_VRADDR                 0x0010  /* Count valid read address cycles */
-+#define PERF_VWADDR                 0x0020  /* Count valid write address cycles */
-+#define PERF_VWDATA                 0x0040  /* Count valid write data cycles */
-+
-+/*
-+ * AHB Error Reporting.
-+ */
-+#define AR531XPLUS_AHB_ERR0         (AR531XPLUS_DSLBASE + 0x0050)  /* error  */
-+#define AR531XPLUS_AHB_ERR1         (AR531XPLUS_DSLBASE + 0x0054)  /* haddr  */
-+#define AR531XPLUS_AHB_ERR2         (AR531XPLUS_DSLBASE + 0x0058)  /* hwdata */
-+#define AR531XPLUS_AHB_ERR3         (AR531XPLUS_DSLBASE + 0x005c)  /* hrdata */
-+#define AR531XPLUS_AHB_ERR4         (AR531XPLUS_DSLBASE + 0x0060)  /* status */
-+
-+#define AHB_ERROR_DET               1   /* AHB Error has been detected,          */
-+                                        /* write 1 to clear all bits in ERR0     */
-+#define AHB_ERROR_OVR               2   /* AHB Error overflow has been detected  */
-+#define AHB_ERROR_WDT               4   /* AHB Error due to wdt instead of hresp */
-+
-+#define PROCERR_HMAST               0x0000000f
-+#define PROCERR_HMAST_DFLT          0
-+#define PROCERR_HMAST_WMAC          1
-+#define PROCERR_HMAST_ENET          2
-+#define PROCERR_HMAST_PCIENDPT      3
-+#define PROCERR_HMAST_LOCAL         4
-+#define PROCERR_HMAST_CPU           5
-+#define PROCERR_HMAST_PCITGT        6
-+                                    
-+#define PROCERR_HMAST_S             0
-+#define PROCERR_HWRITE              0x00000010
-+#define PROCERR_HSIZE               0x00000060
-+#define PROCERR_HSIZE_S             5
-+#define PROCERR_HTRANS              0x00000180
-+#define PROCERR_HTRANS_S            7
-+#define PROCERR_HBURST              0x00000e00
-+#define PROCERR_HBURST_S            9
-+
-+
-+
-+/*
-+ * Clock Control
-+ */
-+#define AR531XPLUS_PLLC_CTL         (AR531XPLUS_DSLBASE + 0x0064)
-+#define AR531XPLUS_PLLV_CTL         (AR531XPLUS_DSLBASE + 0x0068)
-+#define AR531XPLUS_CPUCLK           (AR531XPLUS_DSLBASE + 0x006c)
-+#define AR531XPLUS_AMBACLK          (AR531XPLUS_DSLBASE + 0x0070)
-+#define AR531XPLUS_SYNCCLK          (AR531XPLUS_DSLBASE + 0x0074)
-+#define AR531XPLUS_DSL_SLEEP_CTL    (AR531XPLUS_DSLBASE + 0x0080)
-+#define AR531XPLUS_DSL_SLEEP_DUR    (AR531XPLUS_DSLBASE + 0x0084)
-+
-+/* PLLc Control fields */
-+#define PLLC_REF_DIV_M              0x00000003
-+#define PLLC_REF_DIV_S              0
-+#define PLLC_FDBACK_DIV_M           0x0000007C
-+#define PLLC_FDBACK_DIV_S           2
-+#define PLLC_ADD_FDBACK_DIV_M       0x00000080
-+#define PLLC_ADD_FDBACK_DIV_S       7
-+#define PLLC_CLKC_DIV_M             0x0001c000
-+#define PLLC_CLKC_DIV_S             14
-+#define PLLC_CLKM_DIV_M             0x00700000
-+#define PLLC_CLKM_DIV_S             20
-+
-+/* CPU CLK Control fields */
-+#define CPUCLK_CLK_SEL_M            0x00000003
-+#define CPUCLK_CLK_SEL_S            0
-+#define CPUCLK_CLK_DIV_M            0x0000000c
-+#define CPUCLK_CLK_DIV_S            2
-+
-+/* AMBA CLK Control fields */
-+#define AMBACLK_CLK_SEL_M           0x00000003
-+#define AMBACLK_CLK_SEL_S           0
-+#define AMBACLK_CLK_DIV_M           0x0000000c
-+#define AMBACLK_CLK_DIV_S           2
-+
-+#if defined(COBRA_EMUL)
-+#define AR531XPLUS_AMBA_CLOCK_RATE  20000000
-+#define AR531XPLUS_CPU_CLOCK_RATE   40000000
-+#else
-+#if defined(DEFAULT_PLL)
-+#define AR531XPLUS_AMBA_CLOCK_RATE  40000000
-+#define AR531XPLUS_CPU_CLOCK_RATE   40000000
-+#else
-+#define AR531XPLUS_AMBA_CLOCK_RATE  92000000
-+#define AR531XPLUS_CPU_CLOCK_RATE   184000000
-+#endif /* ! DEFAULT_PLL */
-+#endif /* ! COBRA_EMUL */
-+
-+#define AR531XPLUS_UART_CLOCK_RATE  AR531XPLUS_AMBA_CLOCK_RATE
-+#define AR531XPLUS_SDRAM_CLOCK_RATE AR531XPLUS_AMBA_CLOCK_RATE
-+
-+/*
-+ * The UART computes baud rate as:
-+ *   baud = clock / (16 * divisor)
-+ * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL).
-+ */
-+#define DESIRED_BAUD_RATE           38400
-+
-+/*
-+ * The WATCHDOG value is computed as
-+ *  10 seconds * AR531X_WATCHDOG_CLOCK_RATE
-+ */
-+#define DESIRED_WATCHDOG_SECONDS    10
-+#define AR531X_WATCHDOG_TIME \
-+        (DESIRED_WATCHDOG_SECONDS * AR531X_WATCHDOG_CLOCK_RATE)
-+
-+
-+#define CLOCKCTL_UART0  0x0010  /* enable UART0 external clock */
-+
-+
-+ /*
-+ * Applicable "PCICFG" bits for WLAN(s).  Assoc status and LED mode.
-+ */
-+#define AR531X_PCICFG               (AR531X_RESETTMR + 0x00b0)
-+#define ASSOC_STATUS_M              0x00000003
-+#define ASSOC_STATUS_NONE           0
-+#define ASSOC_STATUS_PENDING        1   
-+#define ASSOC_STATUS_ASSOCIATED     2
-+#define LED_MODE_M                  0x0000001c
-+#define LED_BLINK_THRESHOLD_M       0x000000e0
-+#define LED_SLOW_BLINK_MODE         0x00000100
-+
-+/*
-+ * GPIO
-+ */
-+
-+#define AR531XPLUS_GPIO_DI          (AR531XPLUS_DSLBASE + 0x0088)
-+#define AR531XPLUS_GPIO_DO          (AR531XPLUS_DSLBASE + 0x0090)
-+#define AR531XPLUS_GPIO_CR          (AR531XPLUS_DSLBASE + 0x0098)
-+#define AR531XPLUS_GPIO_INT         (AR531XPLUS_DSLBASE + 0x00a0)
-+
-+#define GPIO_CR_M(x)                (1 << (x))                  /* mask for i/o */
-+#define GPIO_CR_O(x)                (1 << (x))                  /* output */
-+#define GPIO_CR_I(x)                (0 << (x))                  /* input */
-+
-+#define GPIO_INT(x,Y)               ((x) << (8 * (Y)))          /* interrupt enable */
-+#define GPIO_INT_M(Y)               ((0x3F) << (8 * (Y)))       /* mask for int */
-+#define GPIO_INT_LVL(x,Y)           ((x) << (8 * (Y) + 6))      /* interrupt level */
-+#define GPIO_INT_LVL_M(Y)           ((0x3) << (8 * (Y) + 6))    /* mask for int level */
-+
-+#define AR531XPLUS_RESET_GPIO       5
-+#define AR531XPLUS_NUM_GPIO         22
-+
-+    
-+/* 
-+ *  PCI Clock Control
-+ */     
-+ 
-+#define AR531XPLUS_PCICLK           (AR531XPLUS_DSLBASE + 0x00a4)
-+
-+#define PCICLK_INPUT_M              0x3
-+#define PCICLK_INPUT_S              0
-+                         
-+#define PCICLK_PLLC_CLKM            0
-+#define PCICLK_PLLC_CLKM1           1
-+#define PCICLK_PLLC_CLKC            2
-+#define PCICLK_REF_CLK              3 
-+
-+#define PCICLK_DIV_M                0xc
-+#define PCICLK_DIV_S                2
-+                         
-+#define PCICLK_IN_FREQ              0
-+#define PCICLK_IN_FREQ_DIV_6        1
-+#define PCICLK_IN_FREQ_DIV_8        2
-+#define PCICLK_IN_FREQ_DIV_10       3 
-+
-+/*
-+ * Observation Control Register
-+ */
-+#define AR531XPLUS_OCR              (AR531XPLUS_DSLBASE + 0x00b0)
-+#define OCR_GPIO0_IRIN              0x0040
-+#define OCR_GPIO1_IROUT             0x0080
-+#define OCR_GPIO3_RXCLR             0x0200
-+
-+/* 
-+ *  General Clock Control
-+ */     
-+ 
-+#define AR531XPLUS_MISCCLK          (AR531XPLUS_DSLBASE + 0x00b4)
-+#define MISCCLK_PLLBYPASS_EN        0x00000001
-+#define MISCCLK_PROCREFCLK          0x00000002
-+
-+/*
-+ * SDRAM Controller
-+ *   - No read or write buffers are included.
-+ */
-+#define AR531XPLUS_MEM_CFG          (AR531XPLUS_SDRAMCTL + 0x00)
-+#define AR531XPLUS_MEM_CTRL         (AR531XPLUS_SDRAMCTL + 0x0c)
-+#define AR531XPLUS_MEM_REF          (AR531XPLUS_SDRAMCTL + 0x10)
-+
-+#define SDRAM_DATA_WIDTH_M          0x00006000
-+#define SDRAM_DATA_WIDTH_S          13
-+
-+#define SDRAM_COL_WIDTH_M           0x00001E00
-+#define SDRAM_COL_WIDTH_S           9
-+
-+#define SDRAM_ROW_WIDTH_M           0x000001E0
-+#define SDRAM_ROW_WIDTH_S           5
-+
-+#define SDRAM_BANKADDR_BITS_M       0x00000018
-+#define SDRAM_BANKADDR_BITS_S       3
-+
-+
-+/*
-+ * SDRAM Memory Refresh (MEM_REF) value is computed as:
-+ * MEMCTL_SREFR = (Tr * hclk_freq) / R
-+ * where Tr is max. time of refresh of any single row
-+ * R is number of rows in the DRAM
-+ * For most 133MHz SDRAM parts, Tr=64ms, R=4096 or 8192
-+ */
-+#if defined(COBRA_EMUL)
-+#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE  0x96
-+#else 
-+#if defined(DEFAULT_PLL)
-+#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE  0x200
-+#else
-+#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE  0x61a
-+#endif /* ! DEFAULT_PLL */
-+#endif 
-+
-+#if defined(AR531XPLUS)
-+
-+#define AR531XPLUS_SDRAM_DDR_SDRAM      0   /* Not DDR SDRAM */
-+#define AR531XPLUS_SDRAM_DATA_WIDTH     16  /* bits */   
-+#define AR531XPLUS_SDRAM_COL_WIDTH      8
-+#define AR531XPLUS_SDRAM_ROW_WIDTH      12
-+
-+#else
-+
-+#define AR531XPLUS_SDRAM_DDR_SDRAM      0   /* Not DDR SDRAM */
-+#define AR531XPLUS_SDRAM_DATA_WIDTH     16
-+#define AR531XPLUS_SDRAM_COL_WIDTH      8
-+#define AR531XPLUS_SDRAM_ROW_WIDTH      12
-+
-+#endif /* ! AR531XPLUS */
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+
-+#define AR531XPLUS_SPI_CTL      (AR531XPLUS_SPI + 0x00)
-+#define AR531XPLUS_SPI_OPCODE   (AR531XPLUS_SPI + 0x04)
-+#define AR531XPLUS_SPI_DATA     (AR531XPLUS_SPI + 0x08)
-+
-+#define SPI_CTL_START           0x00000100
-+#define SPI_CTL_BUSY            0x00010000
-+#define SPI_CTL_TXCNT_MASK      0x0000000f
-+#define SPI_CTL_RXCNT_MASK      0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
-+#define SPI_CTL_SIZE_MASK       0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK    0x03000000
-+#define SPI_OPCODE_MASK         0x000000ff
-+
-+/* 
-+ * PCI-MAC Configuration registers 
-+ */
-+#define PCI_MAC_RC              (AR531XPLUS_PCI + 0x4000) 
-+#define PCI_MAC_SCR             (AR531XPLUS_PCI + 0x4004)
-+#define PCI_MAC_INTPEND         (AR531XPLUS_PCI + 0x4008)
-+#define PCI_MAC_SFR             (AR531XPLUS_PCI + 0x400C)
-+#define PCI_MAC_PCICFG          (AR531XPLUS_PCI + 0x4010)
-+#define PCI_MAC_SREV            (AR531XPLUS_PCI + 0x4020)
-+
-+#define PCI_MAC_RC_MAC          0x00000001
-+#define PCI_MAC_RC_BB           0x00000002
-+
-+#define PCI_MAC_SCR_SLMODE_M    0x00030000
-+#define PCI_MAC_SCR_SLMODE_S    16        
-+#define PCI_MAC_SCR_SLM_FWAKE   0         
-+#define PCI_MAC_SCR_SLM_FSLEEP  1         
-+#define PCI_MAC_SCR_SLM_NORMAL  2         
-+
-+#define PCI_MAC_SFR_SLEEP       0x00000001
-+
-+#define PCI_MAC_PCICFG_SPWR_DN  0x00010000
-+
-+ 
-+
-+
-+/*
-+ * PCI Bus Interface Registers
-+ */
-+#define AR531XPLUS_PCI_1MS_REG      (AR531XPLUS_PCI + 0x0008)
-+#define AR531XPLUS_PCI_1MS_MASK     0x3FFFF         /* # of AHB clk cycles in 1ms */
-+
-+#define AR531XPLUS_PCI_MISC_CONFIG  (AR531XPLUS_PCI + 0x000c)
-+#define AR531XPLUS_PCIMISC_TXD_EN   0x00000001      /* Enable TXD for fragments */
-+#define AR531XPLUS_PCIMISC_CFG_SEL  0x00000002      /* mem or config cycles */
-+#define AR531XPLUS_PCIMISC_GIG_MASK 0x0000000C      /* bits 31-30 for pci req */
-+#define AR531XPLUS_PCIMISC_RST_MODE 0x00000030
-+#define AR531XPLUS_PCIRST_INPUT     0x00000000      /* 4:5=0 rst is input */
-+#define AR531XPLUS_PCIRST_LOW       0x00000010      /* 4:5=1 rst to GND */
-+#define AR531XPLUS_PCIRST_HIGH      0x00000020      /* 4:5=2 rst to VDD */
-+#define AR531XPLUS_PCIGRANT_EN      0x00000000      /* 6:7=0 early grant en */
-+#define AR531XPLUS_PCIGRANT_FRAME   0x00000040      /* 6:7=1 grant waits 4 frame */
-+#define AR531XPLUS_PCIGRANT_IDLE    0x00000080      /* 6:7=2 grant waits 4 idle */
-+#define AR531XPLUS_PCIGRANT_GAP     0x00000000      /* 6:7=2 grant waits 4 idle */
-+#define AR531XPLUS_PCICACHE_DIS     0x00001000      /* PCI external access cache disable */
-+
-+#define AR531XPLUS_PCI_OUT_TSTAMP   (AR531XPLUS_PCI + 0x0010)
-+
-+#define AR531XPLUS_PCI_UNCACHE_CFG  (AR531XPLUS_PCI + 0x0014)
-+
-+#define AR531XPLUS_PCI_IN_EN        (AR531XPLUS_PCI + 0x0100)
-+#define AR531XPLUS_PCI_IN_EN0       0x01            /* Enable chain 0 */
-+#define AR531XPLUS_PCI_IN_EN1       0x02            /* Enable chain 1 */
-+#define AR531XPLUS_PCI_IN_EN2       0x04            /* Enable chain 2 */
-+#define AR531XPLUS_PCI_IN_EN3       0x08            /* Enable chain 3 */
-+
-+#define AR531XPLUS_PCI_IN_DIS       (AR531XPLUS_PCI + 0x0104)
-+#define AR531XPLUS_PCI_IN_DIS0      0x01            /* Disable chain 0 */
-+#define AR531XPLUS_PCI_IN_DIS1      0x02            /* Disable chain 1 */
-+#define AR531XPLUS_PCI_IN_DIS2      0x04            /* Disable chain 2 */
-+#define AR531XPLUS_PCI_IN_DIS3      0x08            /* Disable chain 3 */
-+
-+#define AR531XPLUS_PCI_IN_PTR       (AR531XPLUS_PCI + 0x0200)
-+
-+#define AR531XPLUS_PCI_OUT_EN       (AR531XPLUS_PCI + 0x0400)
-+#define AR531XPLUS_PCI_OUT_EN0      0x01            /* Enable chain 0 */
-+
-+#define AR531XPLUS_PCI_OUT_DIS      (AR531XPLUS_PCI + 0x0404)
-+#define AR531XPLUS_PCI_OUT_DIS0     0x01            /* Disable chain 0 */
-+
-+#define AR531XPLUS_PCI_OUT_PTR      (AR531XPLUS_PCI + 0x0408)
-+
-+#define AR531XPLUS_PCI_INT_STATUS   (AR531XPLUS_PCI + 0x0500)   /* write one to clr */
-+#define AR531XPLUS_PCI_TXINT        0x00000001      /* Desc In Completed */
-+#define AR531XPLUS_PCI_TXOK         0x00000002      /* Desc In OK */
-+#define AR531XPLUS_PCI_TXERR        0x00000004      /* Desc In ERR */
-+#define AR531XPLUS_PCI_TXEOL        0x00000008      /* Desc In End-of-List */
-+#define AR531XPLUS_PCI_RXINT        0x00000010      /* Desc Out Completed */
-+#define AR531XPLUS_PCI_RXOK         0x00000020      /* Desc Out OK */
-+#define AR531XPLUS_PCI_RXERR        0x00000040      /* Desc Out ERR */
-+#define AR531XPLUS_PCI_RXEOL        0x00000080      /* Desc Out EOL */
-+#define AR531XPLUS_PCI_TXOOD        0x00000200      /* Desc In Out-of-Desc */
-+#define AR531XPLUS_PCI_MASK         0x0000FFFF      /* Desc Mask */
-+#define AR531XPLUS_PCI_EXT_INT      0x02000000      
-+#define AR531XPLUS_PCI_ABORT_INT    0x04000000      
-+
-+#define AR531XPLUS_PCI_INT_MASK     (AR531XPLUS_PCI + 0x0504)   /* same as INT_STATUS */
-+
-+#define AR531XPLUS_PCI_INTEN_REG    (AR531XPLUS_PCI + 0x0508)
-+#define AR531XPLUS_PCI_INT_DISABLE  0x00            /* disable pci interrupts */
-+#define AR531XPLUS_PCI_INT_ENABLE   0x01            /* enable pci interrupts */
-+
-+#define AR531XPLUS_PCI_HOST_IN_EN   (AR531XPLUS_PCI + 0x0800)
-+#define AR531XPLUS_PCI_HOST_IN_DIS  (AR531XPLUS_PCI + 0x0804)
-+#define AR531XPLUS_PCI_HOST_IN_PTR  (AR531XPLUS_PCI + 0x0810)
-+#define AR531XPLUS_PCI_HOST_OUT_EN  (AR531XPLUS_PCI + 0x0900)
-+#define AR531XPLUS_PCI_HOST_OUT_DIS (AR531XPLUS_PCI + 0x0904)
-+#define AR531XPLUS_PCI_HOST_OUT_PTR (AR531XPLUS_PCI + 0x0908)
-+
-+
-+/*
-+ * Local Bus Interface Registers
-+ */
-+#define AR531XPLUS_LB_CONFIG        (AR531XPLUS_LOCAL + 0x0000)
-+#define AR531XPLUS_LBCONF_OE        0x00000001      /* =1 OE is low-true */
-+#define AR531XPLUS_LBCONF_CS0       0x00000002      /* =1 first CS is low-true */
-+#define AR531XPLUS_LBCONF_CS1       0x00000004      /* =1 2nd CS is low-true */
-+#define AR531XPLUS_LBCONF_RDY       0x00000008      /* =1 RDY is low-true */
-+#define AR531XPLUS_LBCONF_WE        0x00000010      /* =1 Write En is low-true */
-+#define AR531XPLUS_LBCONF_WAIT      0x00000020      /* =1 WAIT is low-true */
-+#define AR531XPLUS_LBCONF_ADS       0x00000040      /* =1 Adr Strobe is low-true */
-+#define AR531XPLUS_LBCONF_MOT       0x00000080      /* =0 Intel, =1 Motorola */
-+#define AR531XPLUS_LBCONF_8CS       0x00000100      /* =1 8 bits CS, 0= 16bits */
-+#define AR531XPLUS_LBCONF_8DS       0x00000200      /* =1 8 bits Data S, 0=16bits */
-+#define AR531XPLUS_LBCONF_ADS_EN    0x00000400      /* =1 Enable ADS */
-+#define AR531XPLUS_LBCONF_ADR_OE    0x00000800      /* =1 Adr cap on OE, WE or DS */
-+#define AR531XPLUS_LBCONF_ADDT_MUX  0x00001000      /* =1 Adr and Data share bus */
-+#define AR531XPLUS_LBCONF_DATA_OE   0x00002000      /* =1 Data cap on OE, WE, DS */
-+#define AR531XPLUS_LBCONF_16DATA    0x00004000      /* =1 Data is 16 bits wide */
-+#define AR531XPLUS_LBCONF_SWAPDT    0x00008000      /* =1 Byte swap data */
-+#define AR531XPLUS_LBCONF_SYNC      0x00010000      /* =1 Bus synchronous to clk */
-+#define AR531XPLUS_LBCONF_INT       0x00020000      /* =1 Intr is low true */
-+#define AR531XPLUS_LBCONF_INT_CTR0  0x00000000      /* GND high-Z, Vdd is high-Z */
-+#define AR531XPLUS_LBCONF_INT_CTR1  0x00040000      /* GND drive, Vdd is high-Z */
-+#define AR531XPLUS_LBCONF_INT_CTR2  0x00080000      /* GND high-Z, Vdd drive */
-+#define AR531XPLUS_LBCONF_INT_CTR3  0x000C0000      /* GND drive, Vdd drive */
-+#define AR531XPLUS_LBCONF_RDY_WAIT  0x00100000      /* =1 RDY is negative of WAIT */
-+#define AR531XPLUS_LBCONF_INT_PULSE 0x00200000      /* =1 Interrupt is a pulse */
-+#define AR531XPLUS_LBCONF_ENABLE    0x00400000      /* =1 Falcon respond to LB */
-+
-+#define AR531XPLUS_LB_CLKSEL        (AR531XPLUS_LOCAL + 0x0004)
-+#define AR531XPLUS_LBCLK_EXT        0x0001          /* use external clk for lb */
-+
-+#define AR531XPLUS_LB_1MS           (AR531XPLUS_LOCAL + 0x0008)
-+#define AR531XPLUS_LB1MS_MASK       0x3FFFF         /* # of AHB clk cycles in 1ms */
-+
-+#define AR531XPLUS_LB_MISCCFG       (AR531XPLUS_LOCAL + 0x000C)
-+#define AR531XPLUS_LBM_TXD_EN       0x00000001      /* Enable TXD for fragments */
-+#define AR531XPLUS_LBM_RX_INTEN     0x00000002      /* Enable LB ints on RX ready */
-+#define AR531XPLUS_LBM_MBOXWR_INTEN 0x00000004      /* Enable LB ints on mbox wr */
-+#define AR531XPLUS_LBM_MBOXRD_INTEN 0x00000008      /* Enable LB ints on mbox rd */
-+#define AR531XPLUS_LMB_DESCSWAP_EN  0x00000010      /* Byte swap desc enable */
-+#define AR531XPLUS_LBM_TIMEOUT_MASK 0x00FFFF80
-+#define AR531XPLUS_LBM_TIMEOUT_SHFT 7
-+#define AR531XPLUS_LBM_PORTMUX      0x07000000
-+
-+
-+#define AR531XPLUS_LB_RXTSOFF       (AR531XPLUS_LOCAL + 0x0010)
-+
-+#define AR531XPLUS_LB_TX_CHAIN_EN   (AR531XPLUS_LOCAL + 0x0100)
-+#define AR531XPLUS_LB_TXEN_0        0x01
-+#define AR531XPLUS_LB_TXEN_1        0x02
-+#define AR531XPLUS_LB_TXEN_2        0x04
-+#define AR531XPLUS_LB_TXEN_3        0x08
-+
-+#define AR531XPLUS_LB_TX_CHAIN_DIS  (AR531XPLUS_LOCAL + 0x0104)
-+#define AR531XPLUS_LB_TX_DESC_PTR   (AR531XPLUS_LOCAL + 0x0200)
-+
-+#define AR531XPLUS_LB_RX_CHAIN_EN   (AR531XPLUS_LOCAL + 0x0400)
-+#define AR531XPLUS_LB_RXEN          0x01
-+
-+#define AR531XPLUS_LB_RX_CHAIN_DIS  (AR531XPLUS_LOCAL + 0x0404)
-+#define AR531XPLUS_LB_RX_DESC_PTR   (AR531XPLUS_LOCAL + 0x0408)
-+
-+#define AR531XPLUS_LB_INT_STATUS    (AR531XPLUS_LOCAL + 0x0500)
-+#define AR531XPLUS_INT_TX_DESC      0x0001
-+#define AR531XPLUS_INT_TX_OK        0x0002
-+#define AR531XPLUS_INT_TX_ERR       0x0004
-+#define AR531XPLUS_INT_TX_EOF       0x0008
-+#define AR531XPLUS_INT_RX_DESC      0x0010
-+#define AR531XPLUS_INT_RX_OK        0x0020
-+#define AR531XPLUS_INT_RX_ERR       0x0040
-+#define AR531XPLUS_INT_RX_EOF       0x0080
-+#define AR531XPLUS_INT_TX_TRUNC     0x0100
-+#define AR531XPLUS_INT_TX_STARVE    0x0200
-+#define AR531XPLUS_INT_LB_TIMEOUT   0x0400
-+#define AR531XPLUS_INT_LB_ERR       0x0800
-+#define AR531XPLUS_INT_MBOX_WR      0x1000
-+#define AR531XPLUS_INT_MBOX_RD      0x2000
-+
-+/* Bit definitions for INT MASK are the same as INT_STATUS */
-+#define AR531XPLUS_LB_INT_MASK      (AR531XPLUS_LOCAL + 0x0504)
-+
-+#define AR531XPLUS_LB_INT_EN        (AR531XPLUS_LOCAL + 0x0508)
-+#define AR531XPLUS_LB_MBOX          (AR531XPLUS_LOCAL + 0x0600)
-+
-+
-+
-+/*
-+ * IR Interface Registers
-+ */
-+#define AR531XPLUS_IR_PKTDATA                   (AR531XPLUS_IR + 0x0000)
-+
-+#define AR531XPLUS_IR_PKTLEN                    (AR531XPLUS_IR + 0x07fc) /* 0 - 63 */
-+
-+#define AR531XPLUS_IR_CONTROL                   (AR531XPLUS_IR + 0x0800)
-+#define AR531XPLUS_IRCTL_TX                     0x00000000  /* use as tranmitter */
-+#define AR531XPLUS_IRCTL_RX                     0x00000001  /* use as receiver   */
-+#define AR531XPLUS_IRCTL_SAMPLECLK_MASK         0x00003ffe  /* Sample clk divisor mask */
-+#define AR531XPLUS_IRCTL_SAMPLECLK_SHFT                  1
-+#define AR531XPLUS_IRCTL_OUTPUTCLK_MASK         0x03ffc000  /* Output clk divisor mask */
-+#define AR531XPLUS_IRCTL_OUTPUTCLK_SHFT                 14
-+
-+#define AR531XPLUS_IR_STATUS                    (AR531XPLUS_IR + 0x0804)
-+#define AR531XPLUS_IRSTS_RX                     0x00000001  /* receive in progress */
-+#define AR531XPLUS_IRSTS_TX                     0x00000002  /* transmit in progress */
-+
-+#define AR531XPLUS_IR_CONFIG                    (AR531XPLUS_IR + 0x0808)
-+#define AR531XPLUS_IRCFG_INVIN                  0x00000001  /* invert input polarity */
-+#define AR531XPLUS_IRCFG_INVOUT                 0x00000002  /* invert output polarity */
-+#define AR531XPLUS_IRCFG_SEQ_START_WIN_SEL      0x00000004  /* 1 => 28, 0 => 7 */
-+#define AR531XPLUS_IRCFG_SEQ_START_THRESH       0x000000f0  /*  */
-+#define AR531XPLUS_IRCFG_SEQ_END_UNIT_SEL       0x00000100  /*  */
-+#define AR531XPLUS_IRCFG_SEQ_END_UNIT_THRESH    0x00007e00  /*  */
-+#define AR531XPLUS_IRCFG_SEQ_END_WIN_SEL        0x00008000  /*  */
-+#define AR531XPLUS_IRCFG_SEQ_END_WIN_THRESH     0x001f0000  /*  */
-+#define AR531XPLUS_IRCFG_NUM_BACKOFF_WORDS      0x01e00000  /*  */
-+
-+/*
-+ * PCI memory constants: Memory area 1 and 2 are the same size -
-+ * (twice the PCI_TLB_PAGE_SIZE). The definition of
-+ * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine
-+ * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size
-+ * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space.
-+ */
-+ 
-+#define CPU_TO_PCI_MEM_BASE1    0xE0000000
-+#define CPU_TO_PCI_MEM_SIZE1    (2*PCI_TLB_PAGE_SIZE)
-+ 
-+
-+/* TLB attributes for PCI transactions */
-+
-+#define PCI_MMU_PAGEMASK        0x00003FFF
-+#define MMU_PAGE_UNCACHED       0x00000010
-+#define MMU_PAGE_DIRTY          0x00000004
-+#define MMU_PAGE_VALID          0x00000002
-+#define MMU_PAGE_GLOBAL         0x00000001
-+#define PCI_MMU_PAGEATTRIB      (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\
-+                                 MMU_PAGE_VALID|MMU_PAGE_GLOBAL)
-+#define PCI_MEMORY_SPACE1_VIRT  0xE0000000      /* Used for non-prefet  mem   */
-+#define PCI_MEMORY_SPACE1_PHYS  0x80000000
-+#define PCI_TLB_PAGE_SIZE       0x01000000
-+#define TLB_HI_MASK             0xFFFFE000
-+#define TLB_LO_MASK             0x3FFFFFFF
-+#define PAGEMASK_SHIFT          11
-+#define TLB_LO_SHIFT            6
-+
-+#define PCI_MAX_LATENCY         0xFFF           /* Max PCI latency            */
-+
-+#define HOST_PCI_DEV_ID         3
-+#define HOST_PCI_MBAR0          0x10000000
-+#define HOST_PCI_MBAR1          0x20000000
-+#define HOST_PCI_MBAR2          0x30000000
-+
-+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
-+#define PCI_DEVICE_MEM_SPACE    0x800000
-+
-+
-+typedef unsigned int AR531X_REG;
-+
-+#define sysRegRead(phys)	\
-+	(*(volatile AR531X_REG *)PHYS_TO_K1(phys))
-+
-+#define sysRegWrite(phys, val)	\
-+	((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val))
-+
-+
-+
-+/*
-+ * This is board-specific data that is stored in a "fixed" location in flash.
-+ * It is shared across operating systems, so it should not be changed lightly.
-+ * The main reason we need it is in order to extract the ethernet MAC
-+ * address(es).
-+ */
-+struct ar531x_boarddata {
-+    u32 magic;                       /* board data is valid */
-+#define AR531X_BD_MAGIC 0x35333131   /* "5311", for all 531x platforms */
-+    u16 cksum;                       /* checksum (starting with BD_REV 2) */
-+    u16 rev;                         /* revision of this struct */
-+#define BD_REV  4
-+    char   boardName[64];            /* Name of board */
-+    u16 major;                       /* Board major number */
-+    u16 minor;                       /* Board minor number */
-+    u32 config;                      /* Board configuration */
-+#define BD_ENET0        0x00000001   /* ENET0 is stuffed */
-+#define BD_ENET1        0x00000002   /* ENET1 is stuffed */
-+#define BD_UART1        0x00000004   /* UART1 is stuffed */
-+#define BD_UART0        0x00000008   /* UART0 is stuffed (dma) */
-+#define BD_RSTFACTORY   0x00000010   /* Reset factory defaults stuffed */
-+#define BD_SYSLED       0x00000020   /* System LED stuffed */
-+#define BD_EXTUARTCLK   0x00000040   /* External UART clock */
-+#define BD_CPUFREQ      0x00000080   /* cpu freq is valid in nvram */
-+#define BD_SYSFREQ      0x00000100   /* sys freq is set in nvram */
-+#define BD_WLAN0        0x00000200   /* Enable WLAN0 */
-+#define BD_MEMCAP       0x00000400   /* CAP SDRAM @ memCap for testing */
-+#define BD_DISWATCHDOG  0x00000800   /* disable system watchdog */
-+#define BD_WLAN1        0x00001000   /* Enable WLAN1 (ar5212) */
-+#define BD_ISCASPER     0x00002000   /* FLAG for AR2312 */
-+#define BD_WLAN0_2G_EN  0x00004000   /* FLAG for radio0_2G */
-+#define BD_WLAN0_5G_EN  0x00008000   /* FLAG for radio0_2G */
-+#define BD_WLAN1_2G_EN  0x00020000   /* FLAG for radio0_2G */
-+#define BD_WLAN1_5G_EN  0x00040000   /* FLAG for radio0_2G */
-+    u16 resetConfigGpio;             /* Reset factory GPIO pin */
-+    u16 sysLedGpio;                  /* System LED GPIO pin */
-+
-+    u32 cpuFreq;                     /* CPU core frequency in Hz */
-+    u32 sysFreq;                     /* System frequency in Hz */
-+    u32 cntFreq;                     /* Calculated C0_COUNT frequency */
-+
-+    u8  wlan0Mac[6];
-+    u8  enet0Mac[6];
-+    u8  enet1Mac[6];
-+
-+    u16 pciId;                       /* Pseudo PCIID for common code */
-+    u16 memCap;                      /* cap bank1 in MB */
-+
-+    /* version 3 */
-+    u8  wlan1Mac[6];                 /* (ar5212) */
-+};
-+
-+#endif
-+
-+#endif /* AR531X_H */
-diff -urN linux-mips-orig/drivers/net/ath/ar531xlnx.h linux-mips-new/drivers/net/ath/ar531xlnx.h
---- linux-mips-orig/drivers/net/ath/ar531xlnx.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/ar531xlnx.h	2005-12-31 12:33:57.676538368 +0000
-@@ -0,0 +1,137 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * This file contains definitions needed in order to compile
-+ * AR531X products for linux.  Definitions that are largely
-+ * AR531X-specific and independent of operating system belong
-+ * in ar531x.h rather than this file.
-+ */
-+#ifndef __AR531XLNX_H
-+#define __AR531XLNX_H
-+#include "ar531x.h"
-+
-+#define MIPS_CPU_IRQ_BASE		0x00
-+#define AR531X_HIGH_PRIO                0x10
-+#define AR531X_MISC_IRQ_BASE		0x20
-+#define AR531X_GPIO_IRQ_BASE            0x30
-+
-+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
-+#if CONFIG_AR5315
-+#define AR531X_IRQ_NONE		MIPS_CPU_IRQ_BASE+0
-+#define AR531X_IRQ_MISC_INTRS	MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR531X_IRQ_WLAN0_INTRS	MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR531X_IRQ_ENET0_INTRS	MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR531X_IRQ_LCBUS_PCI	MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+#define AR531X_IRQ_WLAN0_POLL	MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+#define AR531X_IRQ_CPU_CLOCK	MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-+#else
-+#define AR531X_IRQ_NONE		MIPS_CPU_IRQ_BASE+0
-+#define AR531X_IRQ_WLAN0_INTRS	MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR531X_IRQ_ENET0_INTRS	MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR531X_IRQ_ENET1_INTRS	MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR531X_IRQ_WLAN1_INTRS	MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-+#define AR531X_IRQ_MISC_INTRS	MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+#define AR531X_IRQ_CPU_CLOCK	MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-+#endif
-+
-+/* Miscellaneous interrupts, which share IP6 or IP2 */
-+#define AR531X_MISC_IRQ_NONE		AR531X_MISC_IRQ_BASE+0
-+#define AR531X_MISC_IRQ_TIMER		AR531X_MISC_IRQ_BASE+1
-+#define AR531X_MISC_IRQ_AHB_PROC	AR531X_MISC_IRQ_BASE+2
-+#define AR531X_MISC_IRQ_AHB_DMA		AR531X_MISC_IRQ_BASE+3
-+#define AR531X_MISC_IRQ_GPIO		AR531X_MISC_IRQ_BASE+4
-+#define AR531X_MISC_IRQ_UART0		AR531X_MISC_IRQ_BASE+5
-+#define AR531X_MISC_IRQ_UART0_DMA	AR531X_MISC_IRQ_BASE+6
-+#define AR531X_MISC_IRQ_WATCHDOG	AR531X_MISC_IRQ_BASE+7
-+#define AR531X_MISC_IRQ_LOCAL		AR531X_MISC_IRQ_BASE+8
-+#define AR531X_MISC_IRQ_COUNT		9
-+
-+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
-+#define AR531X_GPIO_IRQ_NONE            AR531X_MISC_IRQ_BASE+0
-+#define AR531X_GPIO_IRQ(n)              AR531X_MISC_IRQ_BASE+(n)+1
-+#define AR531X_GPIO_IRQ_COUNT           9
-+
-+#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr)
-+#define PHYS_TO_K0(physaddr) KSEG0ADDR(physaddr)
-+#define UNMAPPED_TO_PHYS(vaddr)  PHYSADDR(vaddr)
-+#define IS_UNMAPPED_VADDR(vaddr) \
-+    ((KSEGX(vaddr) == KSEG0) || (KSEGX(vaddr) == KSEG1))
-+
-+/* IOCTL commands for /proc/ar531x */
-+#define AR531X_CTRL_DO_BREAKPOINT       1
-+#define AR531X_CTRL_DO_MADWIFI          2
-+
-+/*
-+ * Definitions for operating system portability.
-+ * These are vxWorks-->Linux translations.
-+ */
-+#define LOCAL static
-+#define BOOL int
-+#define TRUE 1
-+#define FALSE 0
-+#define UINT8 u8
-+#define UINT16 u16
-+#define UINT32 u32
-+#define PRINTF printk
-+#if /* DEBUG */ 1
-+#define DEBUG_PRINTF printk
-+#define printf printk
-+#define INLINE
-+#else
-+DEBUG_PRINTF while (0) printk
-+#define INLINE inline
-+#endif
-+#define sysUDelay(usecs) udelay(usecs)
-+#define sysMsDelay(msecs) mdelay(msecs)
-+typedef volatile UINT8 *VIRT_ADDR;
-+#define MALLOC(sz) kmalloc(sz, GFP_KERNEL)
-+#define MALLOC_NOSLEEP(sz) kmalloc(sz, GFP_ATOMIC)
-+#define FREE(ptr) kfree((void *)ptr)
-+#define BSP_BUG() do { printk("kernel BSP BUG at %s:%d!\n", __FILE__, __LINE__); *(int *)0=0; } while (0)
-+#define BSP_BUG_ON(condition) do { if (unlikely((condition)!=0)) BSP_BUG(); } while(0)
-+#define ASSERT(x) BSP_BUG_ON(!(x))
-+
-+extern struct ar531x_boarddata *ar531x_board_configuration;
-+extern char *ar531x_radio_configuration;
-+extern char *enet_mac_address_get(int MACUnit);
-+
-+extern void kgdbInit(void);
-+extern int kgdbEnabled(void);
-+extern void breakpoint(void);
-+extern int kgdbInterrupt(void);
-+extern unsigned int ar531x_cpu_frequency(void);
-+extern unsigned int ar531x_sys_frequency(void);
-+
-+/* GPIO support */
-+extern struct irqaction spurious_gpio;
-+extern unsigned int gpioIntMask;
-+extern void ar531x_gpio_intr_init(int irq_base);
-+extern void ar531x_gpio_ctrl_output(int gpio);
-+extern void ar531x_gpio_ctrl_input(int gpio);
-+extern void ar531x_gpio_set(int gpio, int val);
-+extern int  ar531x_gpio_get(int gpio);
-+extern void ar531x_gpio_intr_enable(unsigned int irq);
-+extern void ar531x_gpio_intr_disable(unsigned int irq);
-+
-+/* Watchdog Timer support */
-+extern int watchdog_start(unsigned int milliseconds);
-+extern int watchdog_stop(void);
-+extern int watchdog_is_enabled(void);
-+extern unsigned int watchdog_min_timer_reached(void);
-+extern void watchdog_notify_alive(void);
-+
-+#define A_DATA_CACHE_INVAL(start, length) \
-+        dma_cache_inv((UINT32)(start),(length))
-+
-+#define sysWbFlush() mb()
-+
-+#define intDisable(x) cli()
-+#define intEnable(x) sti()
-+
-+#endif   /* __AR531XLNX_H */
-diff -urN linux-mips-orig/drivers/net/ath/ipPhy.c linux-mips-new/drivers/net/ath/ipPhy.c
---- linux-mips-orig/drivers/net/ath/ipPhy.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/ipPhy.c	2005-12-31 12:33:57.677538216 +0000
-@@ -0,0 +1,833 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * Manage the ICPLUS ethernet PHY.
-+ *
-+ * All definitions in this file are operating system independent!
-+ */
-+
-+#if defined(linux)
-+#include <linux/config.h>
-+#include <linux/types.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/delay.h>
-+
-+#include "ar531xlnx.h"
-+#endif
-+
-+#include "ae531xmac.h"
-+#include "ae531xreg.h"
-+#include "ipPhy.h"
-+
-+/* PHY selections and access functions */
-+
-+typedef enum {
-+    PHY_SRCPORT_INFO, 
-+    PHY_PORTINFO_SIZE,
-+} PHY_CAP_TYPE;
-+
-+typedef enum {
-+    PHY_SRCPORT_NONE,
-+    PHY_SRCPORT_VLANTAG, 
-+    PHY_SRCPORT_TRAILER,
-+} PHY_SRCPORT_TYPE;
-+
-+#ifdef DEBUG
-+#define DRV_DEBUG 1
-+#endif
-+#define DRV_DEBUG 1
-+
-+#if DRV_DEBUG
-+#define DRV_DEBUG_PHYERROR  0x00000001
-+#define DRV_DEBUG_PHYCHANGE 0x00000002
-+#define DRV_DEBUG_PHYSETUP  0x00000004
-+
-+int ipPhyDebug = DRV_DEBUG_PHYERROR;
-+
-+#define DRV_LOG(FLG, X0, X1, X2, X3, X4, X5, X6)    \
-+{                                                   \
-+    if (ipPhyDebug & (FLG)) {                       \
-+        logMsg(X0, X1, X2, X3, X4, X5, X6);         \
-+    }                                               \
-+}
-+
-+#define DRV_MSG(x,a,b,c,d,e,f)                      \
-+    logMsg(x,a,b,c,d,e,f)
-+
-+#define DRV_PRINT(FLG, X)                           \
-+{                                                   \
-+    if (ipPhyDebug & (FLG)) {                       \
-+        printf X;                                   \
-+    }                                               \
-+}
-+
-+#else /* !DRV_DEBUG */
-+#define DRV_LOG(DBG_SW, X0, X1, X2, X3, X4, X5, X6)
-+#define DRV_MSG(x,a,b,c,d,e,f)
-+#define DRV_PRINT(DBG_SW,X)
-+#endif
-+
-+#define IP_LAN_PORT_VLAN          1
-+#define IP_WAN_PORT_VLAN          2
-+
-+#define ENET_UNIT_DEFAULT 0
-+
-+/*
-+ * Track per-PHY port information.
-+ */
-+typedef struct {
-+    BOOL   isEnetPort;       /* normal enet port */
-+    BOOL   isPhyAlive;       /* last known state of link */
-+    int    ethUnit;          /* MAC associated with this phy port */
-+    UINT32 phyBase;
-+    UINT32 phyAddr;          /* PHY registers associated with this phy port */
-+    UINT32 VLANTableSetting; /* Value to be written to VLAN table */
-+} ipPhyInfo_t;
-+
-+/*
-+ * Per-PHY information, indexed by PHY unit number.
-+ */
-+ipPhyInfo_t ipPhyInfo[] = {
-+    /*
-+     * On AP30/AR5312, all PHYs are associated with MAC0.
-+     * AP30/AR5312's MAC1 isn't used for anything.
-+     * CONFIG_VENETDEV==1 (router) configuration:
-+     *    Ports 0,1,2, and 3 are "LAN ports"
-+     *    Port 4 is a WAN port
-+     *    Port 5 connects to MAC0 in the AR5312
-+     * CONFIG_VENETDEV==0 (bridge) configuration:
-+     *    Ports 0,1,2,3,4 are "LAN ports"
-+     *    Port 5 connects to the MAC0 in the AR5312
-+     */
-+    {TRUE,   /* phy port 0 -- LAN port 0 */
-+     FALSE,
-+     ENET_UNIT_DEFAULT,
-+     (UINT32) (PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET),
-+     IP_PHY0_ADDR,
-+     IP_LAN_PORT_VLAN
-+    },
-+
-+    {TRUE,   /* phy port 1 -- LAN port 1 */
-+     FALSE,
-+     ENET_UNIT_DEFAULT,
-+     (UINT32) (PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET),
-+     IP_PHY1_ADDR,
-+     IP_LAN_PORT_VLAN
-+    },
-+
-+    {TRUE,   /* phy port 2 -- LAN port 2 */
-+     FALSE,
-+     ENET_UNIT_DEFAULT,
-+     (UINT32) (PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET),
-+     IP_PHY2_ADDR, 
-+     IP_LAN_PORT_VLAN
-+    },
-+
-+    {TRUE,   /* phy port 3 -- LAN port 3 */
-+     FALSE,
-+     ENET_UNIT_DEFAULT,
-+     (UINT32) (PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET),
-+     IP_PHY3_ADDR, 
-+     IP_LAN_PORT_VLAN
-+    },
-+
-+    {TRUE,   /* phy port 4 -- WAN port or LAN port 4 */
-+     FALSE,
-+     ENET_UNIT_DEFAULT,
-+     (UINT32) (PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET),
-+     IP_PHY4_ADDR, 
-+     IP_LAN_PORT_VLAN   /* Send to all ports */
-+    },
-+
-+    {FALSE,  /* phy port 5 -- CPU port (no RJ45 connector) */
-+     TRUE,
-+     ENET_UNIT_DEFAULT,
-+     (UINT32) (PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET),
-+     0x00, 
-+     IP_LAN_PORT_VLAN    /* Send to all ports */
-+    },
-+};
-+
-+#define IP_GLOBALREGBASE    ((UINT32) (PHYS_TO_K1(AR531X_ENET0)))
-+
-+#define IP_PHY_MAX (sizeof(ipPhyInfo) / sizeof(ipPhyInfo[0]))
-+
-+/* Range of valid PHY IDs is [MIN..MAX] */
-+#define IP_ID_MIN 0
-+#define IP_ID_MAX (IP_PHY_MAX-1)
-+
-+/* Convenience macros to access myPhyInfo */
-+#define IP_IS_ENET_PORT(phyUnit) (ipPhyInfo[phyUnit].isEnetPort)
-+#define IP_IS_PHY_ALIVE(phyUnit) (ipPhyInfo[phyUnit].isPhyAlive)
-+#define IP_ETHUNIT(phyUnit) (ipPhyInfo[phyUnit].ethUnit)
-+#define IP_PHYBASE(phyUnit) (ipPhyInfo[phyUnit].phyBase)
-+#define IP_PHYADDR(phyUnit) (ipPhyInfo[phyUnit].phyAddr)
-+#define IP_VLAN_TABLE_SETTING(phyUnit) (ipPhyInfo[phyUnit].VLANTableSetting)
-+
-+
-+#define IP_IS_ETHUNIT(phyUnit, ethUnit) \
-+            (IP_IS_ENET_PORT(phyUnit) &&        \
-+            IP_ETHUNIT(phyUnit) == (ethUnit))
-+
-+/* Forward references */
-+BOOL       ip_phyIsLinkAlive(int phyUnit);
-+LOCAL void ip_VLANInit(int ethUnit);
-+LOCAL void ip_verifyReady(int ethUnit);
-+#if DEBUG
-+void       ip_phyShow(int phyUnit);
-+void       ip_phySet(int phyUnit, UINT32 regnum, UINT32 value);
-+void       ip_globalSet(UINT32 phyAddr, UINT32 regnum, UINT32 value);
-+#endif
-+
-+/******************************************************************************
-+*
-+* ip_phyIsLinkAlive - test to see if the specified link is alive
-+*
-+* RETURNS:
-+*    TRUE  --> link is alive
-+*    FALSE --> link is down
-+*/
-+BOOL
-+ip_phyIsLinkAlive(int phyUnit)
-+{
-+    UINT16 phyHwStatus;
-+    UINT32 phyBase;
-+    UINT32 phyAddr;
-+
-+    phyBase = IP_PHYBASE(phyUnit);
-+    phyAddr = IP_PHYADDR(phyUnit);
-+
-+    phyHwStatus = phyRegRead(phyBase, phyAddr, IP_PHY_STATUS);
-+
-+    if (phyHwStatus & IP_STATUS_LINK_PASS) {
-+        return TRUE;
-+    } else {
-+        return FALSE;
-+    }
-+}
-+
-+/******************************************************************************
-+*
-+* ip_VLANInit - initialize "port-based VLANs" for the specified enet unit.
-+*/
-+LOCAL void
-+ip_VLANInit(int ethUnit)
-+{
-+    int     phyUnit;
-+    UINT32  phyBase;
-+    UINT32  phyReg;
-+
-+    phyBase = IP_GLOBALREGBASE;
-+    
-+    for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) {
-+        if (IP_ETHUNIT(phyUnit) != ethUnit) {
-+            continue;
-+        }
-+        phyRegWrite(phyBase, IP_GLOBAL_PHY29_ADDR, 
-+                    IP_GLOBAL_PHY29_24_REG + ((phyUnit == 5) ? (phyUnit + 1) : phyUnit),
-+                                    IP_VLAN_TABLE_SETTING(phyUnit));
-+        
-+        /* Send all packets to all ports */
-+        phyReg = phyRegRead(phyBase, IP_GLOBAL_PHY30_ADDR, IP_GLOBAL_PHY30_1_REG);
-+        phyReg = phyReg | ((1 << phyUnit) << IP_VLAN1_OUTPUT_PORT_MASK_S);
-+        phyRegWrite(phyBase, IP_GLOBAL_PHY30_ADDR, IP_GLOBAL_PHY30_1_REG, phyReg);
-+    }
-+    phyReg = phyRegRead(phyBase, IP_GLOBAL_PHY30_ADDR, IP_GLOBAL_PHY30_9_REG);
-+    phyReg = phyReg | TAG_VLAN_ENABLE;
-+    phyReg = phyReg & ~VID_INDX_SEL_M;
-+    phyRegWrite(phyBase, IP_GLOBAL_PHY30_ADDR, IP_GLOBAL_PHY30_9_REG, phyReg);
-+
-+}
-+
-+
-+LOCAL void
-+ip_verifyReady(int ethUnit)
-+{
-+    int     phyUnit;
-+    UINT32  phyBase = 0;
-+    UINT32  phyAddr;
-+    UINT16  phyID1;
-+    UINT16  phyID2;
-+
-+    /*
-+     * The first read to the Phy port registers always fails and
-+     * returns 0.   So get things started with a bogus read.
-+     */
-+    for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) {
-+        if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+
-+        phyBase = IP_PHYBASE(phyUnit);
-+        phyAddr = IP_PHYADDR(phyUnit);
-+    
-+        phyID1 = phyRegRead(phyBase, phyAddr, IP_PHY_ID1); /* returns 0 */
-+        break;
-+    }
-+
-+    for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) {
-+        if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+
-+        /*******************/
-+        /* Verify phy port */
-+        /*******************/
-+        phyBase = IP_PHYBASE(phyUnit);
-+        phyAddr = IP_PHYADDR(phyUnit);
-+    
-+        phyID1 = phyRegRead(phyBase, phyAddr, IP_PHY_ID1);
-+        if (phyID1 != IP_PHY_ID1_EXPECTATION) {
-+            DRV_PRINT(DRV_DEBUG_PHYERROR,
-+                      ("Invalid PHY ID1 for enet%d port%d.  Expected 0x%04x, read 0x%04x\n",
-+                       ethUnit,
-+                       phyUnit,
-+                       IP_PHY_ID1_EXPECTATION,
-+                       phyID1));
-+            return;
-+        }
-+    
-+        phyID2 = phyRegRead(phyBase, phyAddr, IP_PHY_ID2);
-+        if ((phyID2 & IP_OUI_LSB_MASK) != IP_OUI_LSB_EXPECTATION) {
-+            DRV_PRINT(DRV_DEBUG_PHYERROR,
-+                      ("Invalid PHY ID2 for enet%d port %d.  Expected 0x%04x, read 0x%04x\n",
-+                       ethUnit,
-+                       phyUnit,
-+                       IP_OUI_LSB_EXPECTATION,
-+                       phyID2));
-+            return;
-+        }
-+    
-+        DRV_PRINT(DRV_DEBUG_PHYSETUP,
-+                  ("Found PHY enet%d port%d: model 0x%x revision 0x%x\n",
-+                   ethUnit,
-+                   phyUnit,
-+                   (phyID2 & IP_MODEL_NUM_MASK) >> IP_MODEL_NUM_SHIFT,
-+                   (phyID2 & IP_REV_NUM_MASK) >> IP_REV_NUM_SHIFT));
-+    
-+    }
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ip_phySetup - reset and setup the PHY associated with
-+* the specified MAC unit number.
-+*
-+* Resets the associated PHY port.
-+*
-+* RETURNS:
-+*    TRUE  --> associated PHY is alive
-+*    FALSE --> no LINKs on this ethernet unit
-+*/
-+
-+BOOL
-+ip_phySetup(int ethUnit, UINT32 _phyBase)
-+{
-+    int     phyUnit;
-+    UINT16  phyHwStatus;
-+    UINT16  timeout;
-+    int     liveLinks = 0;
-+    UINT32  phyBase = 0;
-+    BOOL    foundPhy = FALSE;
-+    UINT32  phyAddr;
-+    
-+    /* Reset PHYs*/
-+    for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) {
-+        if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+
-+        phyBase = IP_PHYBASE(phyUnit);
-+        phyAddr = IP_PHYADDR(phyUnit);
-+
-+        phyRegWrite(phyBase, phyAddr, IP_PHY_CONTROL,
-+                    IP_CTRL_SOFTWARE_RESET);
-+    }
-+    /*
-+     * After the phy is reset, it takes a little while before
-+     * it can respond properly.
-+     */
-+    sysMsDelay(300);
-+    /* Verify that the switch is what we think it is, and that it's ready */
-+    ip_verifyReady(ethUnit);
-+
-+    /* See if there's any configuration data for this enet */
-+    for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) {
-+        if (IP_ETHUNIT(phyUnit) != ethUnit) {
-+            continue;
-+        }
-+
-+        phyBase = IP_PHYBASE(phyUnit);
-+        foundPhy = TRUE;
-+        break;
-+    }
-+
-+    if (!foundPhy) {
-+        return FALSE; /* No PHY's configured for this ethUnit */
-+    }
-+
-+#ifdef COBRA_TODO
-+    /* Initialize global switch settings */
-+
-+    /* Initialize the aging time */
-+
-+    /* Set the learning properties */
-+#endif
-+
-+    /* start auto negogiation on each phy */
-+    for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) {
-+        if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+
-+        phyBase = IP_PHYBASE(phyUnit);
-+        phyAddr = IP_PHYADDR(phyUnit);
-+        
-+        phyRegWrite(phyBase, phyAddr, IP_AUTONEG_ADVERT,
-+                                        IP_ADVERTISE_ALL);
-+        phyRegWrite(phyBase, phyAddr, IP_PHY_CONTROL,
-+                    IP_CTRL_AUTONEGOTIATION_ENABLE | IP_CTRL_START_AUTONEGOTIATION);
-+    }
-+
-+    /*
-+     * Wait up to .75 seconds for ALL associated PHYs to finish
-+     * autonegotiation.  The only way we get out of here sooner is
-+     * if ALL PHYs are connected AND finish autonegotiation.
-+     */
-+    timeout=5;
-+    for (phyUnit=0; (phyUnit < IP_PHY_MAX) /*&& (timeout > 0) */; phyUnit++) {
-+        if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+        for (;;) {
-+            phyBase = IP_PHYBASE(phyUnit);
-+            phyAddr = IP_PHYADDR(phyUnit);
-+
-+            phyHwStatus = phyRegRead(phyBase, phyAddr, IP_PHY_STATUS);
-+
-+            if (IP_AUTONEG_DONE(phyHwStatus)) {
-+                DRV_PRINT(DRV_DEBUG_PHYSETUP,
-+                          ("Port %d, Neg Success\n", phyUnit));
-+                break;
-+            }
-+            if (timeout == 0) {
-+                DRV_PRINT(DRV_DEBUG_PHYSETUP,
-+                          ("Port %d, Negogiation timeout\n", phyUnit));
-+                break;
-+            }
-+            if (--timeout == 0) {
-+                DRV_PRINT(DRV_DEBUG_PHYSETUP,
-+                          ("Port %d, Negogiation timeout\n", phyUnit));
-+                break;
-+            }
-+
-+            sysMsDelay(150);
-+        }
-+    }
-+
-+    /*
-+     * All PHYs have had adequate time to autonegotiate.
-+     * Now initialize software status.
-+     *
-+     * It's possible that some ports may take a bit longer
-+     * to autonegotiate; but we can't wait forever.  They'll
-+     * get noticed by mv_phyCheckStatusChange during regular
-+     * polling activities.
-+     */
-+    for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) {
-+        if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+
-+        if (ip_phyIsLinkAlive(phyUnit)) {
-+            liveLinks++;
-+            IP_IS_PHY_ALIVE(phyUnit) = TRUE;
-+        } else {
-+            IP_IS_PHY_ALIVE(phyUnit) = FALSE;
-+        }
-+
-+        DRV_PRINT(DRV_DEBUG_PHYSETUP,
-+            ("eth%d: Phy Status=%4.4x\n",
-+            ethUnit, 
-+            phyRegRead(IP_PHYBASE(phyUnit),
-+                       IP_PHYADDR(phyUnit),
-+                       IP_PHY_STATUS)));
-+    }
-+#if 0
-+    /* XXX Divy. Disable WAN/LAN seggregation. See bug 17866 */
-+    ip_VLANInit(ethUnit);
-+#endif
-+    return (liveLinks > 0);
-+}
-+
-+/******************************************************************************
-+*
-+* ip_phyIsDuplexFull - Determines whether the phy ports associated with the
-+* specified device are FULL or HALF duplex.
-+*
-+* RETURNS:
-+*    1  --> FULL
-+*    0 --> HALF
-+*/
-+int
-+ip_phyIsFullDuplex(int ethUnit)
-+{
-+    int     phyUnit;
-+    UINT32  phyBase;
-+    UINT32  phyAddr;
-+    UINT16  phyHwStatus;
-+
-+    for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) {
-+        if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+
-+        if (ip_phyIsLinkAlive(phyUnit)) {
-+
-+            phyBase = IP_PHYBASE(phyUnit);
-+            phyAddr = IP_PHYADDR(phyUnit);
-+
-+            phyHwStatus = phyRegRead(phyBase, phyAddr, IP_LINK_PARTNER_ABILITY);
-+            printk("ipPhy.c: phyHwStatus 0x%x\n",phyHwStatus);
-+            if ((phyHwStatus & IP_LINK_100BASETX_FULL_DUPLEX) || 
-+                (phyHwStatus & IP_LINK_10BASETX_FULL_DUPLEX)) {
-+                return TRUE;
-+            }
-+        }
-+        return -1;
-+    }
-+
-+    return FALSE;
-+
-+}
-+
-+
-+/******************************************************************************
-+*
-+* ip_phyIsSpeed100 - Determines the speed of phy ports associated with the
-+* specified device.
-+*
-+* RETURNS:
-+*    TRUE --> 100Mbit
-+*    FALSE --> 10Mbit
-+*/
-+
-+BOOL
-+ip_phyIsSpeed100(int ethUnit)
-+{
-+    int     phyUnit;
-+    UINT16  phyHwStatus;
-+    UINT32  phyBase;
-+    UINT32  phyAddr;
-+
-+    for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) {
-+        if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+
-+        if (ip_phyIsLinkAlive(phyUnit)) {
-+
-+            phyBase = IP_PHYBASE(phyUnit);
-+            phyAddr = IP_PHYADDR(phyUnit);
-+
-+            phyHwStatus = phyRegRead(phyBase, phyAddr, IP_LINK_PARTNER_ABILITY);
-+
-+            if (phyHwStatus & IP_LINK_100BASETX) {
-+                return TRUE;
-+            }
-+        }
-+    }
-+
-+    return FALSE;
-+}
-+
-+/*****************************************************************************
-+*
-+* ip_phyCheckStatusChange -- checks for significant changes in PHY state.
-+*
-+* A "significant change" is:
-+*     dropped link (e.g. ethernet cable unplugged) OR
-+*     autonegotiation completed + link (e.g. ethernet cable plugged in)
-+*
-+* When a PHY is plugged in, phyLinkGained is called.
-+* When a PHY is unplugged, phyLinkLost is called.
-+*/
-+
-+void
-+ip_phyCheckStatusChange(int ethUnit)
-+{
-+
-+    int           phyUnit;
-+    UINT16        phyHwStatus;
-+    ipPhyInfo_t   *lastStatus;
-+    int           linkCount   = 0;
-+    int           lostLinks   = 0;
-+    int           gainedLinks = 0;
-+    UINT32        phyBase;
-+    UINT32        phyAddr;
-+
-+    for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) {
-+        if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+
-+        phyBase = IP_PHYBASE(phyUnit);
-+        phyAddr = IP_PHYADDR(phyUnit);
-+
-+        lastStatus = &ipPhyInfo[phyUnit];
-+        phyHwStatus = phyRegRead(phyBase, phyAddr, IP_PHY_STATUS);
-+
-+        if (lastStatus->isPhyAlive) { /* last known link status was ALIVE */
-+            /* See if we've lost link */
-+            if (phyHwStatus & IP_STATUS_LINK_PASS) {
-+                linkCount++;
-+            } else {
-+                lostLinks++;
-+#ifdef COBRA_TODO
-+                mv_flushATUDB(phyUnit);
-+#endif
-+                DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d down\n",
-+                                               ethUnit, phyUnit));
-+                lastStatus->isPhyAlive = FALSE;
-+            }
-+        } else { /* last known link status was DEAD */
-+            /* Check for AutoNegotiation complete */
-+            if (IP_AUTONEG_DONE(phyHwStatus)) {
-+                gainedLinks++;
-+                linkCount++;
-+                DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d up\n",
-+                                               ethUnit, phyUnit));
-+                lastStatus->isPhyAlive = TRUE;
-+            }
-+        }
-+    }
-+
-+    if (linkCount == 0) {
-+        if (lostLinks) {
-+            /* We just lost the last link for this MAC */
-+            phyLinkLost(ethUnit);
-+        }
-+    } else {
-+        if (gainedLinks == linkCount) {
-+            /* We just gained our first link(s) for this MAC */
-+            phyLinkGained(ethUnit);
-+        }
-+    }
-+
-+}
-+
-+#if DEBUG
-+
-+/* Define the registers of interest for a phyShow command */
-+typedef struct ipRegisterTableEntry_s {
-+    UINT32 regNum;
-+    char  *regIdString;
-+} ipRegisterTableEntry_t;
-+
-+ipRegisterTableEntry_t ipPhyRegisterTable[] = {
-+    {IP_PHY_CONTROL,                 "PHY Control                     "},
-+    {IP_PHY_STATUS,                  "PHY Status                      "},
-+    {IP_PHY_ID1,                     "PHY Identifier 1                "},
-+    {IP_PHY_ID2,                     "PHY Identifier 2                "},
-+    {IP_AUTONEG_ADVERT,              "Auto-Negotiation Advertisement  "},
-+    {IP_LINK_PARTNER_ABILITY,        "Link Partner Ability            "},
-+    {IP_AUTONEG_EXPANSION,           "Auto-Negotiation Expansion      "},
-+};
-+int ipPhyNumRegs = sizeof(ipPhyRegisterTable) / sizeof(ipPhyRegisterTable[0]);
-+
-+
-+ipRegisterTableEntry_t ipPhy29GlobalRegisterTable[] = {
-+    {IP_GLOBAL_PHY29_18_REG,        "29_18_REG   "},
-+    {IP_GLOBAL_PHY29_19_REG,        "29_19_REG   "},
-+    {IP_GLOBAL_PHY29_20_REG,        "29_20_REG   "},
-+    {IP_GLOBAL_PHY29_21_REG,        "29_21_REG   "},
-+    {IP_GLOBAL_PHY29_22_REG,        "29_22_REG   "},
-+    {IP_GLOBAL_PHY29_23_REG,        "29_23_REG   "},
-+    {IP_GLOBAL_PHY29_24_REG,        "29_24_REG   "},
-+    {IP_GLOBAL_PHY29_25_REG,        "29_25_REG   "},
-+    {IP_GLOBAL_PHY29_26_REG,        "29_26_REG   "},
-+    {IP_GLOBAL_PHY29_27_REG,        "29_27_REG   "},
-+    {IP_GLOBAL_PHY29_28_REG,        "29_28_REG   "},
-+    {IP_GLOBAL_PHY29_29_REG,        "29_29_REG   "},
-+    {IP_GLOBAL_PHY29_30_REG,        "29_30_REG   "},
-+    {IP_GLOBAL_PHY29_31_REG,        "29_31_REG   "},
-+};
-+int ipPhy29GlobalNumRegs =
-+    sizeof(ipPhy29GlobalRegisterTable) / sizeof(ipPhy29GlobalRegisterTable[0]);
-+
-+
-+ipRegisterTableEntry_t ipPhy30GlobalRegisterTable[] = {
-+    {IP_GLOBAL_PHY30_0_REG,   "30_0_REG    "},
-+    {IP_GLOBAL_PHY30_1_REG,   "30_1_REG    "},
-+    {IP_GLOBAL_PHY30_2_REG,   "30_2_REG    "},
-+    {IP_GLOBAL_PHY30_3_REG,   "30_3_REG    "},
-+    {IP_GLOBAL_PHY30_4_REG,   "30_4_REG    "},
-+    {IP_GLOBAL_PHY30_5_REG,   "30_5_REG    "},
-+    {IP_GLOBAL_PHY30_6_REG,   "30_6_REG    "},
-+    {IP_GLOBAL_PHY30_7_REG,   "30_7_REG    "},
-+    {IP_GLOBAL_PHY30_8_REG,   "30_8_REG    "},
-+    {IP_GLOBAL_PHY30_9_REG,   "30_9_REG    "},
-+    {IP_GLOBAL_PHY30_10_REG,  "30_10_REG   "},
-+    {IP_GLOBAL_PHY30_11_REG,  "30_11_REG   "},
-+    {IP_GLOBAL_PHY30_12_REG,  "30_12_REG   "},
-+    {IP_GLOBAL_PHY30_13_REG,  "30_13_REG   "},
-+    {IP_GLOBAL_PHY30_16_REG,  "30_16_REG   "},
-+    {IP_GLOBAL_PHY30_17_REG,  "30_17_REG   "},
-+    {IP_GLOBAL_PHY30_18_REG,  "30_18_REG   "},
-+    {IP_GLOBAL_PHY30_20_REG,  "30_20_REG   "},
-+    {IP_GLOBAL_PHY30_21_REG,  "30_21_REG   "},
-+    {IP_GLOBAL_PHY30_22_REG,  "30_22_REG   "},
-+    {IP_GLOBAL_PHY30_23_REG,  "30_23_REG   "},
-+    {IP_GLOBAL_PHY30_24_REG,  "30_24_REG   "},
-+    {IP_GLOBAL_PHY30_25_REG,  "30_25_REG   "},
-+    {IP_GLOBAL_PHY30_26_REG,  "30_26_REG   "},
-+    {IP_GLOBAL_PHY30_27_REG,  "30_27_REG   "},
-+    {IP_GLOBAL_PHY30_28_REG,  "30_28_REG   "},
-+    {IP_GLOBAL_PHY30_29_REG,  "30_29_REG   "},
-+    {IP_GLOBAL_PHY30_30_REG,  "30_30_REG   "},
-+    {IP_GLOBAL_PHY30_31_REG,  "30_31_REG   "},
-+};
-+int ipPhy30GlobalNumRegs =
-+    sizeof(ipPhy30GlobalRegisterTable) / sizeof(ipPhy30GlobalRegisterTable[0]);
-+
-+ipRegisterTableEntry_t ipPhy31GlobalRegisterTable[] = {
-+    {IP_GLOBAL_PHY31_0_REG,   "31_0_REG    "},
-+    {IP_GLOBAL_PHY31_1_REG,   "31_1_REG    "},
-+    {IP_GLOBAL_PHY31_2_REG,   "31_2_REG    "},
-+    {IP_GLOBAL_PHY31_3_REG,   "31_3_REG    "},
-+    {IP_GLOBAL_PHY31_4_REG,   "31_4_REG    "},
-+    {IP_GLOBAL_PHY31_5_REG,   "31_5_REG    "},
-+    {IP_GLOBAL_PHY31_6_REG,   "31_6_REG    "},
-+};
-+
-+int ipPhy31GlobalNumRegs =
-+    sizeof(ipPhy31GlobalRegisterTable) / sizeof(ipPhy31GlobalRegisterTable[0]);
-+
-+
-+/*****************************************************************************
-+*
-+* ip_phyShow - Dump the state of a PHY.
-+* There are two sets of registers for each phy port:
-+*  "phy registers" and
-+*  "switch port registers"
-+* We dump 'em all, plus the switch global registers.
-+*/
-+void
-+ip_phyShow(int phyUnit)
-+{
-+    int     i;
-+    UINT16  value;
-+    UINT32  phyBase;
-+    UINT32  phyAddr;
-+
-+    if (!ip_validPhyId(phyUnit)) {
-+        return;
-+    }
-+
-+    phyBase        = IP_PHYBASE(phyUnit);
-+    phyAddr        = IP_PHYADDR(phyUnit);
-+
-+    printf("PHY state for PHY%d (enet%d, phyBase 0x%8x, phyAddr 0x%x)\n",
-+           phyUnit,
-+           IP_ETHUNIT(phyUnit),
-+           IP_PHYBASE(phyUnit),
-+           IP_PHYADDR(phyUnit));
-+
-+    printf("PHY Registers:\n");
-+    for (i=0; i < ipPhyNumRegs; i++) {
-+
-+        value = phyRegRead(phyBase, phyAddr, ipPhyRegisterTable[i].regNum);
-+
-+        printf("Reg %02d (0x%02x) %s = 0x%08x\n",
-+               ipPhyRegisterTable[i].regNum,
-+               ipPhyRegisterTable[i].regNum,
-+               ipPhyRegisterTable[i].regIdString,
-+               value);
-+    }
-+
-+    phyBase = IP_GLOBALREGBASE;
-+
-+    printf("Switch Global Registers:\n");
-+    printf("Phy29 Registers:\n");
-+    for (i=0; i < ipPhy29GlobalNumRegs; i++) {
-+
-+        value = phyRegRead(phyBase, IP_GLOBAL_PHY29_ADDR,
-+                           ipPhy29GlobalRegisterTable[i].regNum);
-+
-+        printf("Reg %02d (0x%02x) %s = 0x%08x\n",
-+               ipPhy29GlobalRegisterTable[i].regNum,
-+               ipPhy29GlobalRegisterTable[i].regNum,
-+               ipPhy29GlobalRegisterTable[i].regIdString,
-+               value);
-+    }
-+
-+    printf("Phy30 Registers:\n");
-+    for (i=0; i < ipPhy30GlobalNumRegs; i++) {
-+
-+        value = phyRegRead(phyBase, IP_GLOBAL_PHY30_ADDR,
-+                           ipPhy30GlobalRegisterTable[i].regNum);
-+
-+        printf("Reg %02d (0x%02x) %s = 0x%08x\n",
-+               ipPhy30GlobalRegisterTable[i].regNum,
-+               ipPhy30GlobalRegisterTable[i].regNum,
-+               ipPhy30GlobalRegisterTable[i].regIdString,
-+               value);
-+    }
-+    printf("Phy31 Registers:\n");
-+    for (i=0; i < ipPhy31GlobalNumRegs; i++) {
-+
-+        value = phyRegRead(phyBase, IP_GLOBAL_PHY31_ADDR,
-+                           ipPhy31GlobalRegisterTable[i].regNum);
-+
-+        printf("Reg %02d (0x%02x) %s = 0x%08x\n",
-+               ipPhy31GlobalRegisterTable[i].regNum,
-+               ipPhy31GlobalRegisterTable[i].regNum,
-+               ipPhy31GlobalRegisterTable[i].regIdString,
-+               value);
-+    }
-+}
-+
-+/*****************************************************************************
-+*
-+* ip_phySet - Modify the value of a PHY register (debug only).
-+*/
-+void
-+ip_phySet(int phyUnit, UINT32 regnum, UINT32 value)
-+{
-+    UINT32  phyBase;
-+    UINT32  phyAddr;
-+
-+    if (ip_validPhyId(phyUnit)) {
-+
-+        phyBase = IP_PHYBASE(phyUnit);
-+        phyAddr = IP_PHYADDR(phyUnit);
-+
-+        phyRegWrite(phyBase, phyAddr, regnum, value);
-+    }
-+}
-+
-+/*****************************************************************************
-+*
-+* ip_globalSet - Modify the value of a global register
-+* (debug only).
-+*/
-+void
-+ip_globalSet(UINT32 phyAddr, UINT32 regnum, UINT32 value)
-+{
-+    UINT32  phyBase;
-+
-+    phyBase = IP_GLOBALREGBASE;
-+
-+    phyRegWrite(phyBase, phyAddr, regnum, value);
-+}
-+
-+
-+#endif
-diff -urN linux-mips-orig/drivers/net/ath/ipPhy.h linux-mips-new/drivers/net/ath/ipPhy.h
---- linux-mips-orig/drivers/net/ath/ipPhy.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/ipPhy.h	2005-12-31 12:33:57.678538064 +0000
-@@ -0,0 +1,172 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * icPhy.h - definitions for the ethernet PHY.
-+ * This code supports a simple 1-port ethernet phy, ICPLUS,
-+ * All definitions in this file are operating system independent!
-+ */
-+
-+#ifndef IPPHY_H
-+#define IPPHY_H
-+
-+/*****************/
-+/* PHY Registers */
-+/*****************/
-+#define IP_PHY_CONTROL                 0
-+#define IP_PHY_STATUS                  1
-+#define IP_PHY_ID1                     2
-+#define IP_PHY_ID2                     3
-+#define IP_AUTONEG_ADVERT              4
-+#define IP_LINK_PARTNER_ABILITY        5
-+#define IP_AUTONEG_EXPANSION           6
-+
-+
-+/* IP_PHY_CONTROL fields */
-+#define IP_CTRL_SOFTWARE_RESET                    0x8000
-+#define IP_CTRL_SPEED_100                         0x2000
-+#define IP_CTRL_AUTONEGOTIATION_ENABLE            0x1000
-+#define IP_CTRL_START_AUTONEGOTIATION             0x0200
-+#define IP_CTRL_SPEED_FULL_DUPLEX                 0x0100
-+
-+/* Phy status fields */
-+#define IP_STATUS_AUTO_NEG_DONE                   0x0020
-+#define IP_STATUS_LINK_PASS                       0x0004
-+
-+#define IP_AUTONEG_DONE(ip_phy_status)                   \
-+    (((ip_phy_status) &                                  \
-+        (IP_STATUS_AUTO_NEG_DONE)) ==                    \
-+        (IP_STATUS_AUTO_NEG_DONE))
-+
-+/* ICPLUS_PHY_ID1 fields */
-+#define IP_PHY_ID1_EXPECTATION                    0x0243 /* OUI >> 6 */
-+
-+/* ICPLUS_PHY_ID2 fields */
-+#define IP_OUI_LSB_MASK                           0xfc00
-+#define IP_OUI_LSB_EXPECTATION                    0x0c00
-+#define IP_OUI_LSB_SHIFT                              10
-+#define IP_MODEL_NUM_MASK                         0x03f0
-+#define IP_MODEL_NUM_SHIFT                             4
-+#define IP_REV_NUM_MASK                           0x000f
-+#define IP_REV_NUM_SHIFT                               0
-+
-+/* Link Partner ability */
-+#define IP_LINK_100BASETX_FULL_DUPLEX       0x0100
-+#define IP_LINK_100BASETX                   0x0080
-+#define IP_LINK_10BASETX_FULL_DUPLEX        0x0040
-+#define IP_LINK_10BASETX                    0x0020
-+
-+/* Advertisement register. */
-+#define IP_ADVERTISE_100FULL                0x0100
-+#define IP_ADVERTISE_100HALF                0x0080  
-+#define IP_ADVERTISE_10FULL                 0x0040  
-+#define IP_ADVERTISE_10HALF                 0x0020  
-+
-+#define IP_ADVERTISE_ALL (IP_ADVERTISE_10HALF | IP_ADVERTISE_10FULL | \
-+                       IP_ADVERTISE_100HALF | IP_ADVERTISE_100FULL)
-+               
-+               
-+#define IP_VLAN_TAG_VALID                   0x81
-+#define IP_VLAN_TAG_SIZE                    4
-+#define IP_VLAN_TAG_OFFSET                  12   /* After DA & SA */
-+#define IP_SPECIAL_TAG_VALID                0x81
-+              
-+/****************************/
-+/* Global Control Registers */
-+/****************************/
-+/* IP Global register doesn't have names based on functionality
-+ * hence has to live with this names  for now */
-+#define IP_GLOBAL_PHY29_18_REG  18
-+#define IP_GLOBAL_PHY29_19_REG  19
-+#define IP_GLOBAL_PHY29_20_REG  20
-+#define IP_GLOBAL_PHY29_21_REG  21
-+#define IP_GLOBAL_PHY29_22_REG  22
-+#define IP_GLOBAL_PHY29_23_REG  23
-+#define IP_GLOBAL_PHY29_24_REG  24
-+#define IP_GLOBAL_PHY29_25_REG  25
-+#define IP_GLOBAL_PHY29_26_REG  26
-+#define IP_GLOBAL_PHY29_27_REG  27
-+#define IP_GLOBAL_PHY29_28_REG  28
-+#define IP_GLOBAL_PHY29_29_REG  29
-+#define IP_GLOBAL_PHY29_30_REG  30
-+#define IP_GLOBAL_PHY29_31_REG  31
-+
-+
-+#define IP_GLOBAL_PHY30_0_REG   0
-+#define IP_GLOBAL_PHY30_1_REG   1
-+#define IP_GLOBAL_PHY30_2_REG   2
-+#define IP_GLOBAL_PHY30_3_REG   3
-+#define IP_GLOBAL_PHY30_4_REG   4
-+#define IP_GLOBAL_PHY30_5_REG   5
-+#define IP_GLOBAL_PHY30_6_REG   6
-+#define IP_GLOBAL_PHY30_7_REG   7
-+#define IP_GLOBAL_PHY30_8_REG   8
-+#define IP_GLOBAL_PHY30_9_REG   9
-+#define IP_GLOBAL_PHY30_10_REG  10
-+#define IP_GLOBAL_PHY30_11_REG  11
-+#define IP_GLOBAL_PHY30_12_REG  12
-+#define IP_GLOBAL_PHY30_13_REG  13
-+#define IP_GLOBAL_PHY30_16_REG  16
-+#define IP_GLOBAL_PHY30_17_REG  17
-+#define IP_GLOBAL_PHY30_18_REG  18
-+#define IP_GLOBAL_PHY30_20_REG  20
-+#define IP_GLOBAL_PHY30_21_REG  21
-+#define IP_GLOBAL_PHY30_22_REG  22
-+#define IP_GLOBAL_PHY30_23_REG  23
-+#define IP_GLOBAL_PHY30_24_REG  24
-+#define IP_GLOBAL_PHY30_25_REG  25
-+#define IP_GLOBAL_PHY30_26_REG  26
-+#define IP_GLOBAL_PHY30_27_REG  27
-+#define IP_GLOBAL_PHY30_28_REG  28
-+#define IP_GLOBAL_PHY30_29_REG  29
-+#define IP_GLOBAL_PHY30_30_REG  30
-+#define IP_GLOBAL_PHY30_31_REG  31
-+
-+#define IP_GLOBAL_PHY31_0_REG   0
-+#define IP_GLOBAL_PHY31_1_REG   1
-+#define IP_GLOBAL_PHY31_2_REG   2
-+#define IP_GLOBAL_PHY31_3_REG   3
-+#define IP_GLOBAL_PHY31_4_REG   4
-+#define IP_GLOBAL_PHY31_5_REG   5
-+#define IP_GLOBAL_PHY31_6_REG   6
-+
-+#define IP_GLOBAL_PHY29_31_REG  31
-+
-+
-+#define IP_VLAN0_OUTPUT_PORT_MASK_S     0
-+#define IP_VLAN1_OUTPUT_PORT_MASK_S     8
-+#define IP_VLAN2_OUTPUT_PORT_MASK_S     0
-+#define IP_VLAN3_OUTPUT_PORT_MASK_S     8
-+
-+/* Masks and shifts for 29.23 register */
-+#define IP_PORTX_ADD_TAG_S               11
-+#define IP_PORTX_REMOVE_TAG_S            6       
-+#define IP_PORT5_ADD_TAG_S               1
-+#define IP_PORT5_REMOVE_TAG_S            0
-+
-+/* 
-+ * 30.9   Definitions 
-+ */
-+#define TAG_VLAN_ENABLE         0x0080
-+#define VID_INDX_SEL_M          0x0070            
-+#define VID_INDX_SEL_S          4            
-+
-+                  
-+/* PHY Addresses */
-+#define IP_PHY0_ADDR    0
-+#define IP_PHY1_ADDR    1
-+#define IP_PHY2_ADDR    2
-+#define IP_PHY3_ADDR    3
-+#define IP_PHY4_ADDR    4
-+
-+#define IP_GLOBAL_PHY29_ADDR    29
-+#define IP_GLOBAL_PHY30_ADDR    30
-+#define IP_GLOBAL_PHY31_ADDR    31
-+
-+
-+#endif
-diff -urN linux-mips-orig/drivers/net/ath/kendSwitchPhy.c linux-mips-new/drivers/net/ath/kendSwitchPhy.c
---- linux-mips-orig/drivers/net/ath/kendSwitchPhy.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/kendSwitchPhy.c	2005-12-31 12:33:57.678538064 +0000
-@@ -0,0 +1,286 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * Manage the ethernet PHY.
-+ * This code supports a simple 1-port ethernet phy, Realtek RTL8201BL,
-+ * and compatible PHYs, such as the Kendin KS8721B.
-+ * All definitions in this file are operating system independent!
-+ */
-+
-+#if defined(linux)
-+#include <linux/config.h>
-+#include <linux/types.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/delay.h>
-+
-+#include "ar531xlnx.h"
-+#endif
-+
-+#if defined(__ECOS)
-+#include "ae531xecos.h"
-+#endif
-+
-+
-+#include "ae531xmac.h"
-+#include "ae531xreg.h"
-+#include "rtPhy.h"
-+
-+#define RT_MAX_PORTS 5 /* max addressable ports per MIIM */
-+
-+#if /* DEBUG */ 1
-+#define RT_DEBUG_ERROR     0x00000001
-+#define RT_DEBUG_PHYSETUP  0x00000002
-+#define RT_DEBUG_PHYCHANGE 0x00000004
-+
-+/* XXX: must hardcode this since same MIIM for all ethUnits */
-+const UINT32 phyBase = 0xb8100000;
-+
-+int rtPhyDebug = RT_DEBUG_ERROR;
-+
-+#define RT_PRINT(FLG, X)                            \
-+{                                                   \
-+    if (rtPhyDebug & (FLG)) {                       \
-+        DEBUG_PRINTF X;                             \
-+    }                                               \
-+}
-+#else
-+#define RT_PRINT(FLG, X)
-+#endif
-+
-+/*
-+ * Track per-PHY state.
-+ */
-+static BOOL rtPhyAlive[RT_MAX_PORTS];
-+
-+
-+/******************************************************************************
-+*
-+* rt_phySetup - reset and setup the PHY associated with
-+* the specified MAC unit number.
-+*
-+* Resets the associated PHY port.
-+*
-+* RETURNS:
-+*    TRUE  --> associated PHY is alive
-+*    FALSE --> no LINKs on this ethernet unit
-+*/
-+
-+BOOL
-+rt_phySetup(int ethUnit, UINT32 phyBaseIgnored)
-+{
-+    BOOL    linkAlive = FALSE;
-+
-+    /* Reset phy */
-+	if (ethUnit == 0) {
-+		int i;
-+		for (i=1; i<5; i++) {
-+			phyRegWrite(phyBase, i, GEN_ctl, AUTONEGENA);
-+			sysMsDelay(200);
-+			if (phyRegRead(phyBase, i, GEN_sts) & (AUTOCMPLT | LINK)) {
-+				rtPhyAlive[i] = TRUE;
-+			}
-+			else {
-+				rtPhyAlive[i] = FALSE;
-+			}
-+		}
-+	}
-+	else {
-+		phyRegWrite(phyBase, 5, GEN_ctl, AUTONEGENA);
-+		sysMsDelay(200);
-+		if (phyRegRead(phyBase, 5, GEN_sts) & (AUTOCMPLT | LINK)) {
-+			rtPhyAlive[5] = TRUE;
-+		}
-+		else {
-+			rtPhyAlive[5] = FALSE;
-+		}
-+	}
-+
-+    return linkAlive;
-+}
-+
-+/******************************************************************************
-+*
-+* rt_phyIsDuplexFull - Determines whether the phy ports associated with the
-+* specified device are FULL or HALF duplex.
-+*
-+* RETURNS:
-+*    1  --> FULL
-+*    0 --> HALF
-+*/
-+int
-+rt_phyIsFullDuplex(int ethUnit)
-+{
-+	UINT16  phyLpa = 0;
-+
-+	if (ethUnit == 0) {
-+		int i;
-+		/* 4 ports connected. If any are half-duplex report half. */
-+		for (i=1; i<5; i++) {
-+			phyLpa = phyRegRead(phyBase, i, AN_lpa);
-+			if ( (!(phyLpa & (LPA_TXFD | LPA_10FD))) && 
-+				 (phyLpa & (LPA_TX | LPA_10)) ) {
-+				return 0;
-+			}
-+		}
-+		return 1;
-+	}
-+	else {
-+		phyLpa = phyRegRead(phyBase, 5, AN_lpa);
-+		if (phyLpa & (LPA_TXFD | LPA_10FD) ) {
-+			return 1;
-+		}
-+		else {
-+			return 0;
-+		}
-+	}
-+}
-+
-+/******************************************************************************
-+*
-+* rt_phyIsSpeed100 - Determines the speed of phy ports associated with the
-+* specified device.
-+*
-+* RETURNS:
-+*    TRUE --> 100Mbit
-+*    FALSE --> 10Mbit
-+*/
-+BOOL
-+rt_phyIsSpeed100(int ethUnit)
-+{
-+    UINT16  phyLpa;
-+
-+	if (ethUnit == 0) {
-+		int i;
-+		/* 4 ports connected. If any are not 100 report 10. */
-+		for (i=1; i<5; i++) {
-+			phyLpa = phyRegRead(phyBase, i, AN_lpa);
-+			if ( (!(phyLpa & (LPA_TXFD | LPA_TX))) && 
-+				 (phyLpa & (LPA_10FD | LPA_10)) ) {
-+				printk("10\n");
-+				return FALSE;
-+			}
-+		}
-+		printk("100\n");
-+		return TRUE;
-+	}
-+	else {
-+		phyLpa = phyRegRead(phyBase, 5, AN_lpa);
-+		if (phyLpa & (LPA_TXFD | LPA_TX) ) {
-+			printk("100\n");
-+			return TRUE;
-+		}
-+		else {
-+			printk("10\n");
-+			return FALSE;
-+		}
-+	}
-+}
-+
-+/*****************************************************************************
-+*
-+* rt_phyCheckStatusChange -- checks for significant changes in PHY state.
-+*
-+* A "significant change" is:
-+*     dropped link (e.g. ethernet cable unplugged) OR
-+*     autonegotiation completed + link (e.g. ethernet cable plugged in)
-+*
-+* When a PHY is plugged in, phyLinkGained is called.
-+* When a PHY is unplugged, phyLinkLost is called.
-+*/
-+void
-+rt_phyCheckStatusChange(int ethUnit)
-+{
-+    UINT16          phyHwStatus;
-+	int i, loopLower, loopUpper;
-+	
-+	if (ethUnit == 0) {
-+		loopLower = 1;
-+		loopUpper = 4;
-+	}
-+	else {
-+		loopLower = 5;
-+		loopUpper = 5;
-+	}
-+
-+	for (i=loopLower; i<=loopUpper; i++) {
-+		phyHwStatus = phyRegRead(phyBase, i, GEN_sts);
-+
-+		if (rtPhyAlive[i]) { /* last known status was ALIVE */
-+			/* See if we've lost link */
-+			if (!(phyHwStatus & LINK)) {
-+				RT_PRINT(RT_DEBUG_PHYCHANGE,("\nethmac%d link down\n", ethUnit));
-+				rtPhyAlive[i] = FALSE;
-+				phyLinkLost(ethUnit);
-+			}
-+		} else { /* last known status was DEAD */
-+			/* Check for AN complete */
-+			if ((phyHwStatus & (AUTOCMPLT | LINK)) == (AUTOCMPLT | LINK)) {
-+				RT_PRINT(RT_DEBUG_PHYCHANGE,("\nethmac%d link up\n", ethUnit));
-+				rtPhyAlive[i] = TRUE;
-+				phyLinkGained(ethUnit);
-+			}
-+		}
-+	}
-+}
-+
-+#if DEBUG
-+
-+/* Define the PHY registers of interest for a phyShow command */
-+struct rtRegisterTable_s {
-+    UINT32 regNum;
-+    char  *regIdString;
-+} rtRegisterTable[] =
-+{
-+    {GEN_ctl,    "Basic Mode Control (GEN_ctl)    "},
-+    {GEN_sts,    "Basic Mode Status (GEN_sts)     "},
-+    {GEN_id_hi,  "PHY Identifier 1 (GET_id_hi)    "},
-+    {GEN_id_lo,  "PHY Identifier 2 (GET_id_lo)    "},
-+    {AN_adv,     "Auto-Neg Advertisement (AN_adv) "},
-+    {AN_lpa,     "Auto-Neg Link Partner Ability   "},
-+    {AN_exp,     "Auto-Neg Expansion              "},
-+};
-+
-+int rtNumRegs = sizeof(rtRegisterTable) / sizeof(rtRegisterTable[0]);
-+
-+/*
-+ * Dump the state of a PHY.
-+ */
-+void
-+rt_phyShow(int phyUnit)
-+{
-+    int i;
-+    UINT16  value;
-+	int j, loopLower, loopUpper;
-+
-+    printf("PHY state for ethphy%d\n", phyUnit);
-+	
-+	if (phyUnit == 0) {
-+		loopLower = 1;
-+		loopUpper = 4;
-+	}
-+	else {
-+		loopLower = 5;
-+		loopUpper = 5;
-+	}
-+
-+	for (j=loopLower; j<=loopUpper; j++) {
-+		printk("PHY port %d:\n", j);
-+		for (i=0; i<rtNumRegs; i++) {
-+			
-+			value = phyRegRead(phyBase, j, rtRegisterTable[i].regNum);
-+			
-+			printf("Reg %02d (0x%02x) %s = 0x%08x\n",
-+				   rtRegisterTable[i].regNum, rtRegisterTable[i].regNum,
-+				   rtRegisterTable[i].regIdString, value);
-+		}
-+	}
-+}
-+
-+#endif
-diff -urN linux-mips-orig/drivers/net/ath/Makefile linux-mips-new/drivers/net/ath/Makefile
---- linux-mips-orig/drivers/net/ath/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/Makefile	2005-12-31 12:33:57.678538064 +0000
-@@ -0,0 +1,78 @@
-+################################################################################
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License.  See the file "COPYING" in the main directory of this archive
-+# for more details.
-+#
-+# Copyright © 2004 Atheros Communications, Inc.,  All Rights Reserved.
-+#
-+# Makefile for Atheros ar531x ethernet driver
-+#
-+# Note! Dependencies are done automagically by 'make dep', which also
-+# removes any old dependencies. DON'T put your own dependencies here
-+# unless it's something special (ie not a .c file).
-+#
-+################################################################################
-+
-+#
-+# Makefile for the Atheros ar531x ethernet driver
-+#
-+
-+obj= .
-+
-+obj-m		 += ae531x.o
-+ae531x-objs	 := ae531xlnx.o ae531xmac.o
-+export-objs	 := ae531xlnx.o
-+list-multi	 := ae531x.o
-+
-+ifeq ($(CONFIG_KENDIN_ENET_PHY),y)
-+  ae531x-objs += rtPhy.o
-+endif
-+ifeq ($(CONFIG_KENDIN_KS8995XA_ENET_PHY),y)
-+  ae531x-objs += kendSwitchPhy.o
-+endif
-+ifeq ($(CONFIG_MARVELL_ENET_PHY),y)
-+  ae531x-objs += mvPhy.o
-+endif
-+ifeq ($(CONFIG_ICPLUS_ENET_PHY),y)
-+  ae531x-objs += ipPhy.o
-+endif
-+
-+#
-+# If building directly into kernel
-+#
-+ifneq ($(MAKING_MODULES),1)
-+obj-$(CONFIG_NET_ATHEROS_ETHER) := ae531x.o $(ae531x-objs)
-+O_TARGET := ae531x.o
-+endif
-+
-+INCS += -I.
-+
-+EXTRA_CFLAGS+=$(INCS) ${COPTS} -g
-+ifeq ($(DEBUG_BUILD),1)
-+EXTRA_CFLAGS+=-DDEBUG
-+endif
-+
-+# release tag versioning
-+-include $(KERNELPATH)/ath_version.mk
-+
-+-include $(TOPDIR)/Rules.make
-+STRIP=	${TOOLPREFIX}strip
-+
-+ifndef MODPATH
-+MODPATH = ${KERNELPATH}/arch/mips/ar531x/ROOTDISK/rootdir/lib/modules/${KERNELRELEASE}/
-+endif
-+
-+all:
-+	$(MAKE)	-C ${KERNELPATH} SUBDIRS=$(shell pwd) modules
-+
-+install: all
-+	$(STRIP) -S ae531x.o
-+	cp ae531x.o ${KERNELPATH}/arch/mips/ar531x/ROOTDISK/rootdir/lib/modules/$(strip $(shell head -n 1 $(KERNELPATH)/Makefile | cut -f 2 -d'=')).$(strip $(shell head -n 2 $(KERNELPATH)/Makefile | tail -1 | cut -f 2 -d'=')).$(strip $(shell head -n 3 $(KERNELPATH)/Makefile | tail -1 | cut -f 2 -d'='))${EXTRAVERSION}/net/.
-+
-+clean:
-+	-rm -f *~ *.o *.ko *.mod.c
-+	-rm -f .version .*.o.flags .*.o.d .*.o.cmd .*.ko.cmd
-+
-+ae531x.o : $(ae531x-objs)
-+	$(LD) -o ae531x.o -r $(ae531x-objs)
-diff -urN linux-mips-orig/drivers/net/ath/mvPhy.c linux-mips-new/drivers/net/ath/mvPhy.c
---- linux-mips-orig/drivers/net/ath/mvPhy.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/mvPhy.c	2005-12-31 12:33:57.726530768 +0000
-@@ -0,0 +1,1230 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+* Manage the ethernet PHY switch, Marvell 88E6060.
-+* 
-+* This module is intended to be largely OS and platform-independent.
-+*/
-+
-+#if defined(linux)
-+#include <linux/config.h>
-+#include <linux/types.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/delay.h>
-+
-+#include "ar531xlnx.h"
-+#endif
-+
-+#if defined(__ECOS)
-+#include "ae531xecos.h"
-+#endif
-+
-+
-+#include "ae531xmac.h"
-+#include "ae531xreg.h"
-+#include "mvPhy.h"
-+
-+#if /* DEBUG */ 1
-+#define MV_DEBUG_ERROR     0x00000001
-+#define MV_DEBUG_PHYSETUP  0x00000002
-+#define MV_DEBUG_PHYCHANGE 0x00000004
-+
-+int mvPhyDebug = MV_DEBUG_ERROR;
-+
-+#define MV_PRINT(FLG, X)                            \
-+{                                                   \
-+    if (mvPhyDebug & (FLG)) {                       \
-+        DEBUG_PRINTF X;                             \
-+    }                                               \
-+}
-+#else
-+#define MV_PRINT(FLG, X)
-+#endif
-+
-+#if CONFIG_VENETDEV
-+/*
-+ * On AR5312 with CONFIG_VENETDEV==1,
-+ *   ports 0..3 are LAN ports  (accessed through ae0)
-+ *   port 4 is the WAN port.   (accessed through ae1)
-+ * 
-+ * The phy switch settings in the mvPhyInfo table are set accordingly.
-+ */
-+#define MV_WAN_PORT          4
-+#define MV_IS_LAN_PORT(port) ((port) <  MV_WAN_PORT)
-+#define MV_IS_WAN_PORT(port) ((port) == MV_WAN_PORT)
-+#endif
-+
-+/*
-+ * Track per-PHY port information.
-+ */
-+typedef struct {
-+    BOOL   isEnetPort;       /* normal enet port */
-+    BOOL   isPhyAlive;       /* last known state of link */
-+    int    ethUnit;          /* MAC associated with this phy port */
-+    UINT32 phyBase;
-+    UINT32 phyAddr;          /* PHY registers associated with this phy port */
-+    UINT32 switchPortAddr;   /* switch port regs assoc'ed with this phy port */
-+    UINT32 VLANTableSetting; /* Value to be written to VLAN table */
-+} mvPhyInfo_t;
-+
-+/******************************************************************************
-+ * Per-PHY information, indexed by PHY unit number.
-+ *
-+ * This table is board-dependent.  It includes information
-+ * about which enet MAC controls which PHY port.
-+ */
-+mvPhyInfo_t mvPhyInfo[] = {
-+    /*
-+     * On AP30/AR5312, all PHYs are associated with MAC0.
-+     * AP30/AR5312's MAC1 isn't used for anything.
-+     * CONFIG_VENETDEV==1 (router) configuration:
-+     *    Ports 0,1,2, and 3 are "LAN ports"
-+     *    Port 4 is a WAN port
-+     *    Port 5 connects to MAC0 in the AR5312
-+     * CONFIG_VENETDEV==0 (bridge) configuration:
-+     *    Ports 0,1,2,3,4 are "LAN ports"
-+     *    Port 5 connects to the MAC0 in the AR5312
-+     */
-+    {isEnetPort: TRUE,   /* phy port 0 -- LAN port 0 */
-+     isPhyAlive: FALSE,
-+     ethUnit: 0,
-+     phyBase: 0,
-+     phyAddr: 0x10,
-+     switchPortAddr: 0x18,
-+#if CONFIG_VENETDEV
-+     VLANTableSetting: 0x2e
-+#else
-+     VLANTableSetting: 0x3e
-+#endif
-+    },
-+
-+    {isEnetPort: TRUE,   /* phy port 1 -- LAN port 1 */
-+     isPhyAlive: FALSE,
-+     ethUnit: 0,
-+     phyBase: 0,
-+     phyAddr: 0x11,
-+     switchPortAddr: 0x19,
-+#if CONFIG_VENETDEV
-+     VLANTableSetting: 0x2d
-+#else
-+     VLANTableSetting: 0x3d
-+#endif
-+    },
-+
-+    {isEnetPort: TRUE,   /* phy port 2 -- LAN port 2 */
-+     isPhyAlive: FALSE,
-+     ethUnit: 0,
-+     phyBase: 0,
-+     phyAddr: 0x12, 
-+     switchPortAddr: 0x1a,
-+#if CONFIG_VENETDEV
-+     VLANTableSetting: 0x2b
-+#else
-+     VLANTableSetting: 0x3b
-+#endif
-+    },
-+
-+    {isEnetPort: TRUE,   /* phy port 3 -- LAN port 3 */
-+     isPhyAlive: FALSE,
-+     ethUnit: 0,
-+     phyBase: 0,
-+     phyAddr: 0x13, 
-+     switchPortAddr: 0x1b,
-+#if CONFIG_VENETDEV
-+     VLANTableSetting: 0x27
-+#else
-+     VLANTableSetting: 0x37
-+#endif
-+    },
-+
-+    {isEnetPort: TRUE,   /* phy port 4 -- WAN port or LAN port 4 */
-+     isPhyAlive: FALSE,
-+     ethUnit: 0,
-+     phyBase: 0,
-+     phyAddr: 0x14, 
-+     switchPortAddr: 0x1c,
-+#if CONFIG_VENETDEV
-+     VLANTableSetting: 0x1020  /* WAN port */
-+#else
-+     VLANTableSetting: 0x2f    /* LAN port 4 */
-+#endif
-+    },
-+
-+    {isEnetPort: FALSE,  /* phy port 5 -- CPU port (no RJ45 connector) */
-+     isPhyAlive: TRUE,
-+     ethUnit: 0,
-+     phyBase: 0,
-+     phyAddr: 0x15, 
-+     switchPortAddr: 0x1d,
-+#if CONFIG_VENETDEV
-+     VLANTableSetting: 0x0f    /* Send only to LAN ports */
-+#else
-+     VLANTableSetting: 0x1f    /* Send to all ports */
-+#endif
-+    },
-+};
-+
-+#define MV_PHY_MAX (sizeof(mvPhyInfo) / sizeof(mvPhyInfo[0]))
-+
-+/* Range of valid PHY IDs is [MIN..MAX] */
-+#define MV_ID_MIN 0
-+#define MV_ID_MAX (MV_PHY_MAX-1)
-+
-+/* Convenience macros to access myPhyInfo */
-+#define MV_IS_ENET_PORT(phyUnit) (mvPhyInfo[phyUnit].isEnetPort)
-+#define MV_IS_PHY_ALIVE(phyUnit) (mvPhyInfo[phyUnit].isPhyAlive)
-+#define MV_ETHUNIT(phyUnit) (mvPhyInfo[phyUnit].ethUnit)
-+#define MV_PHYBASE(phyUnit) (mvPhyInfo[phyUnit].phyBase)
-+#define MV_PHYADDR(phyUnit) (mvPhyInfo[phyUnit].phyAddr)
-+#define MV_SWITCH_PORT_ADDR(phyUnit) (mvPhyInfo[phyUnit].switchPortAddr)
-+#define MV_VLAN_TABLE_SETTING(phyUnit) (mvPhyInfo[phyUnit].VLANTableSetting)
-+
-+#define MV_IS_ETHUNIT(phyUnit, ethUnit) \
-+    (MV_IS_ENET_PORT(phyUnit) &&        \
-+    MV_ETHUNIT(phyUnit) == (ethUnit))
-+
-+
-+/* Forward references */
-+BOOL       mv_phyIsLinkAlive(int phyUnit);
-+LOCAL void mv_VLANInit(int ethUnit);
-+LOCAL void mv_enableConfiguredPorts(int ethUnit);
-+LOCAL void mv_verifyReady(int ethUnit);
-+BOOL       mv_phySetup(int ethUnit, UINT32 phyBase);
-+int        mv_phyIsFullDuplex(int ethUnit);
-+BOOL       mv_phyIsSpeed100(int phyUnit);
-+LOCAL BOOL mv_validPhyId(int phyUnit);
-+void       mv_flushATUDB(int phyUnit);
-+void       mv_phyCheckStatusChange(int ethUnit);
-+#if DEBUG
-+void       mv_phyShow(int phyUnit);
-+void       mv_phySet(int phyUnit, UINT32 regnum, UINT32 value);
-+void       mv_switchPortSet(int phyUnit, UINT32 regnum, UINT32 value);
-+void       mv_switchGlobalSet(int phyUnit, UINT32 regnum, UINT32 value);
-+void       mv_showATUDB(int phyUnit);
-+void       mv_countGoodFrames(int phyUnit);
-+void       mv_countBadFrames(int phyUnit);
-+void       mv_showFrameCounts(int phyUnit);
-+#endif
-+
-+
-+/******************************************************************************
-+*
-+* mv_phyIsLinkAlive - test to see if the specified link is alive
-+*
-+* RETURNS:
-+*    TRUE  --> link is alive
-+*    FALSE --> link is down
-+*/
-+BOOL
-+mv_phyIsLinkAlive(int phyUnit)
-+{
-+    UINT16 phyHwStatus;
-+    UINT32 phyBase;
-+    UINT32 phyAddr;
-+
-+    phyBase = MV_PHYBASE(phyUnit);
-+    phyAddr = MV_PHYADDR(phyUnit);
-+
-+    phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS);
-+
-+    if (phyHwStatus & MV_STATUS_REAL_TIME_LINK_UP) {
-+        return TRUE;
-+    } else {
-+        return FALSE;
-+    }
-+}
-+
-+/******************************************************************************
-+*
-+* mv_VLANInit - initialize "port-based VLANs" for the specified enet unit.
-+*/
-+LOCAL void
-+mv_VLANInit(int ethUnit)
-+{
-+    int     phyUnit;
-+    UINT32  phyBase;
-+    UINT32  switchPortAddr;
-+
-+    for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
-+        if (MV_ETHUNIT(phyUnit) != ethUnit) {
-+            continue;
-+        }
-+
-+        phyBase        = MV_PHYBASE(phyUnit);
-+        switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit);
-+
-+        phyRegWrite(phyBase, switchPortAddr, MV_PORT_BASED_VLAN_MAP,
-+                    MV_VLAN_TABLE_SETTING(phyUnit));
-+    }
-+}
-+
-+#define phyPortConfigured(phyUnit) TRUE /* TBDFREEDOM2 */
-+
-+/******************************************************************************
-+*
-+* mv_enableConfiguredPorts - enable whichever PHY ports are supposed
-+* to be enabled according to administrative configuration.
-+*/
-+LOCAL void
-+mv_enableConfiguredPorts(int ethUnit)
-+{
-+    int     phyUnit;
-+    UINT32  phyBase;
-+    UINT32  switchPortAddr;
-+    UINT16  portControl;
-+    UINT16  portAssociationVector;
-+
-+    for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
-+        if (MV_ETHUNIT(phyUnit) != ethUnit) {
-+            continue;
-+        }
-+
-+        phyBase        = MV_PHYBASE(phyUnit);
-+        switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit);
-+
-+        if (phyPortConfigured(phyUnit)) {
-+
-+            portControl = MV_PORT_CONTROL_PORT_STATE_FORWARDING;
-+#if CONFIG_VENETDEV
-+            if (!MV_IS_ENET_PORT(phyUnit)) {       /* CPU port */
-+                portControl |= MV_PORT_CONTROL_INGRESS_TRAILER
-+                            | MV_PORT_CONTROL_EGRESS_MODE;
-+            }
-+#endif
-+            phyRegWrite(phyBase, switchPortAddr, MV_PORT_CONTROL, portControl);
-+
-+            portAssociationVector = 1 << phyUnit;
-+
-+            phyRegWrite(phyBase, switchPortAddr,
-+                MV_PORT_ASSOCIATION_VECTOR, portAssociationVector);
-+        }
-+    }
-+}
-+
-+/******************************************************************************
-+*
-+* mv_verifyReady - validates that we're dealing with the device
-+* we think we're dealing with, and that it's ready.
-+*/
-+LOCAL void
-+mv_verifyReady(int ethUnit)
-+{
-+    int     phyUnit;
-+    UINT16  globalStatus;
-+    UINT32  phyBase = 0;
-+    UINT32  phyAddr;
-+    UINT32  switchPortAddr;
-+    UINT16  phyID1;
-+    UINT16  phyID2;
-+    UINT16  switchID;
-+
-+    /*
-+     * The first read to the Phy port registers always fails and
-+     * returns 0.   So get things started with a bogus read.
-+     */
-+    for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
-+        if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+        phyBase = MV_PHYBASE(phyUnit);
-+        phyAddr = MV_PHYADDR(phyUnit);
-+    
-+        (void)phyRegRead(phyBase, phyAddr, MV_PHY_ID1); /* returns 0 */
-+        break;
-+    }
-+
-+    for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
-+        if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+
-+        /*******************/
-+        /* Verify phy port */
-+        /*******************/
-+        phyBase = MV_PHYBASE(phyUnit);
-+        phyAddr = MV_PHYADDR(phyUnit);
-+    
-+        phyID1 = phyRegRead(phyBase, phyAddr, MV_PHY_ID1);
-+        if (phyID1 != MV_PHY_ID1_EXPECTATION) {
-+            MV_PRINT(MV_DEBUG_PHYSETUP,
-+                      ("Invalid PHY ID1 for ethmac%d port%d.  Expected 0x%04x, read 0x%04x\n",
-+                       ethUnit,
-+                       phyUnit,
-+                       MV_PHY_ID1_EXPECTATION,
-+                       phyID1));
-+            return;
-+        }
-+    
-+        phyID2 = phyRegRead(phyBase, phyAddr, MV_PHY_ID2);
-+        if ((phyID2 & MV_OUI_LSB_MASK) != MV_OUI_LSB_EXPECTATION) {
-+            MV_PRINT(MV_DEBUG_PHYSETUP,
-+                      ("Invalid PHY ID2 for ethmac%d port %d.  Expected 0x%04x, read 0x%04x\n",
-+                       ethUnit,
-+                       phyUnit,
-+                       MV_OUI_LSB_EXPECTATION,
-+                       phyID2));
-+            return;
-+        }
-+    
-+        MV_PRINT(MV_DEBUG_PHYSETUP,
-+                  ("Found PHY ethmac%d port%d: model 0x%x revision 0x%x\n",
-+                   ethUnit,
-+                   phyUnit,
-+                   (phyID2 & MV_MODEL_NUM_MASK) >> MV_MODEL_NUM_SHIFT,
-+                   (phyID2 & MV_REV_NUM_MASK) >> MV_REV_NUM_SHIFT));
-+    
-+    
-+        /**********************/
-+        /* Verify switch port */
-+        /**********************/
-+        switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit);
-+    
-+        switchID = phyRegRead(phyBase, switchPortAddr, MV_SWITCH_ID);
-+        if ((switchID & MV_SWITCH_ID_DEV_MASK) !=
-+            MV_SWITCH_ID_DEV_EXPECTATION) {
-+    
-+            MV_PRINT(MV_DEBUG_PHYSETUP,
-+                      ("Invalid switch ID for ethmac%d port %d.  Expected 0x%04x, read 0x%04x\n",
-+                       ethUnit,
-+                       phyUnit,
-+                       MV_SWITCH_ID_DEV_EXPECTATION,
-+                       switchID));
-+            return;
-+        }
-+    
-+        MV_PRINT(MV_DEBUG_PHYSETUP,
-+                  ("Found PHY switch for enet %d port %d deviceID 0x%x revision 0x%x\n",
-+                    ethUnit,
-+                    phyUnit,
-+                    (switchID & MV_SWITCH_ID_DEV_MASK) >> MV_SWITCH_ID_DEV_SHIFT,
-+                    (switchID & MV_SWITCH_ID_REV_MASK) >> MV_SWITCH_ID_REV_SHIFT))
-+    }
-+    
-+    /*******************************/
-+    /* Verify that switch is ready */
-+    /*******************************/
-+    if (phyBase) {
-+        globalStatus = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR,
-+                                  MV_SWITCH_GLOBAL_STATUS);
-+
-+        if (!(globalStatus & MV_SWITCH_STATUS_READY_MASK)) {
-+            MV_PRINT(MV_DEBUG_PHYSETUP,
-+                      ("PHY switch for ethmac%d NOT ready!\n",
-+                       ethUnit));
-+        }
-+    } else {
-+        MV_PRINT(MV_DEBUG_PHYSETUP,
-+                  ("No ports configured for ethmac%d\n", ethUnit));
-+    }
-+}
-+
-+/******************************************************************************
-+*
-+* mv_phySetup - reset and setup the PHY switch.
-+*
-+* Resets each PHY port.
-+*
-+* RETURNS:
-+*    TRUE  --> at least 1 PHY with LINK
-+*    FALSE --> no LINKs on this ethernet unit
-+*/
-+BOOL
-+mv_phySetup(int ethUnit, UINT32 phyBase)
-+{
-+    int     phyUnit;
-+    int     liveLinks = 0;
-+    BOOL    foundPhy = FALSE;
-+    UINT32  phyAddr;
-+    UINT16  atuControl;
-+
-+    /*
-+     * Allow platform-specific code to determine the default Ethernet MAC
-+     * at run-time.  If phyEthMacDefault returns a negative value, use the
-+     * static mvPhyInfo table "as is".  But if phyEthMacDefault returns a
-+     * non-negative value, use it as the default ethernet unit.
-+     */
-+    {
-+        int ethMacDefault = phyEthMacDefault();
-+
-+        if (ethMacDefault >= 0) {
-+            for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
-+                MV_ETHUNIT(phyUnit)=ethMacDefault;
-+            }
-+        }
-+    }
-+
-+    /*
-+     * See if there's any configuration data for this enet,
-+     * and set up phyBase in table.
-+     */
-+    for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
-+        if (MV_ETHUNIT(phyUnit) != ethUnit) {
-+            continue;
-+        }
-+
-+        MV_PHYBASE(phyUnit) = phyBase;
-+        foundPhy = TRUE;
-+    }
-+
-+    if (!foundPhy) {
-+        return FALSE; /* No PHY's configured for this ethUnit */
-+    }
-+
-+    /* Verify that the switch is what we think it is, and that it's ready */
-+    mv_verifyReady(ethUnit);
-+
-+    /* Initialize global switch settings */
-+    atuControl  = MV_ATUCTRL_AGE_TIME_DEFAULT << MV_ATUCTRL_AGE_TIME_SHIFT;
-+    atuControl |= MV_ATUCTRL_ATU_SIZE_DEFAULT << MV_ATUCTRL_ATU_SIZE_SHIFT;
-+    phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_CONTROL, atuControl);
-+
-+    /* Reset PHYs and start autonegoation on each. */
-+    for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
-+        if (MV_ETHUNIT(phyUnit) != ethUnit) {
-+            continue;
-+        }
-+
-+        phyBase = MV_PHYBASE(phyUnit);
-+        phyAddr = MV_PHYADDR(phyUnit);
-+
-+        phyRegWrite(phyBase, phyAddr, MV_PHY_CONTROL,
-+                    MV_CTRL_SOFTWARE_RESET | MV_CTRL_AUTONEGOTIATION_ENABLE);
-+    }
-+
-+#if 0 /* Don't wait -- we'll detect shortly after the link comes up */
-+{
-+    int timeout;
-+    UINT16  phyHwStatus;
-+
-+    /*
-+     * Wait 5 seconds for ALL associated PHYs to finish autonegotiation.
-+     */
-+    timeout=50;
-+    for (phyUnit=0; (phyUnit < MV_PHY_MAX) && (timeout > 0); phyUnit++) {
-+        if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+        for (;;) {
-+            phyBase = MV_PHYBASE(phyUnit);
-+            phyAddr = MV_PHYADDR(phyUnit);
-+
-+            phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS);
-+
-+            if (MV_AUTONEG_DONE(phyHwStatus)) {
-+                break;
-+            }
-+
-+            if (--timeout == 0) {
-+                break;
-+            }
-+
-+            sysMsDelay(100);
-+        }
-+    }
-+}
-+#endif
-+
-+    /*
-+     * All PHYs have had adequate time to autonegotiate.
-+     * Now initialize software status.
-+     *
-+     * It's possible that some ports may take a bit longer
-+     * to autonegotiate; but we can't wait forever.  They'll
-+     * get noticed by mv_phyCheckStatusChange during regular
-+     * polling activities.
-+     */
-+    for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
-+        if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+
-+        if (mv_phyIsLinkAlive(phyUnit)) {
-+            liveLinks++;
-+            MV_IS_PHY_ALIVE(phyUnit) = TRUE;
-+        } else {
-+            MV_IS_PHY_ALIVE(phyUnit) = FALSE;
-+        }
-+
-+        MV_PRINT(MV_DEBUG_PHYSETUP,
-+            ("ethmac%d: Phy Status=%4.4x\n",
-+            ethUnit, 
-+            phyRegRead(MV_PHYBASE(phyUnit),
-+                       MV_PHYADDR(phyUnit),
-+                       MV_PHY_SPECIFIC_STATUS)));
-+    }
-+
-+    mv_VLANInit(ethUnit);
-+
-+    mv_enableConfiguredPorts(ethUnit);
-+
-+    return (liveLinks > 0);
-+}
-+
-+
-+/******************************************************************************
-+*
-+* mv_phyIsDuplexFull - Determines whether the phy ports associated with the
-+* specified device are FULL or HALF duplex.
-+*
-+* RETURNS:
-+*    1 --> at least one associated PHY in FULL DUPLEX
-+*    0 --> all half duplex
-+*   -1 --> No links
-+*/
-+int
-+mv_phyIsFullDuplex(int ethUnit)
-+{
-+    int     phyUnit;
-+    UINT32  phyBase;
-+    UINT32  phyAddr;
-+    UINT16  phyHwStatus;
-+    int     oneIsReady=0;
-+
-+    for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
-+        if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+
-+        if (mv_phyIsLinkAlive(phyUnit)) {
-+	    oneIsReady = 1;
-+
-+            phyBase = MV_PHYBASE(phyUnit);
-+            phyAddr = MV_PHYADDR(phyUnit);
-+
-+            phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS);
-+
-+            if (phyHwStatus & MV_STATUS_RESOLVED_DUPLEX_FULL) {
-+                return 1;
-+            }
-+        }
-+    }
-+    if (oneIsReady)
-+	return 0;
-+    else
-+	return -1;
-+}
-+
-+/******************************************************************************
-+*
-+* mv_phyIsSpeed100 - Determines the speed of a phy port
-+*
-+* RETURNS:
-+*    TRUE --> PHY operating at 100 Mbit
-+*    FALSE --> link down, or not operating at 100 Mbit
-+*/
-+BOOL
-+mv_phyIsSpeed100(int phyUnit)
-+{
-+    UINT16  phyHwStatus;
-+    UINT32  phyBase;
-+    UINT32  phyAddr;
-+
-+    if (MV_IS_ENET_PORT(phyUnit)) {
-+        if (mv_phyIsLinkAlive(phyUnit)) {
-+
-+            phyBase = MV_PHYBASE(phyUnit);
-+            phyAddr = MV_PHYADDR(phyUnit);
-+
-+            phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS);
-+
-+            if (phyHwStatus & MV_STATUS_RESOLVED_SPEED_100) {
-+                return TRUE;
-+            }
-+        }
-+    }
-+
-+    return FALSE;
-+}
-+
-+#if CONFIG_VENETDEV
-+/******************************************************************************
-+*
-+* mv_phyDetermineSource - Examine a received frame's Egress Trailer
-+* to determine whether it came from a LAN or WAN port.
-+*
-+* RETURNS:
-+*    Sets *pFromLAN: 1-->LAN, 0-->WAN
-+*    Modifies *pLen to remove PHY trailer from frame
-+*/
-+void
-+mv_phyDetermineSource(char *data, int len, int *pFromLAN)
-+{
-+    unsigned char *phyTrailer;
-+    unsigned char incomingPort;
-+
-+    phyTrailer = &data[len - MV_PHY_TRAILER_SIZE];
-+    ASSERT(phyTrailer[0] == MV_EGRESS_TRAILER_VALID);
-+
-+    incomingPort = phyTrailer[1];
-+    if (MV_IS_LAN_PORT(incomingPort)) {
-+        *pFromLAN = 1;
-+    } else {
-+        ASSERT(MV_IS_WAN_PORT(incomingPort));
-+        *pFromLAN = 0;
-+    }
-+}
-+
-+
-+/******************************************************************************
-+*
-+* mv_phySetDestinationPort - Set the Ingress Trailer to force the
-+* frame to be sent to LAN or WAN, as specified.
-+*
-+*/
-+void
-+mv_phySetDestinationPort(char *data, int len, int fromLAN)
-+{
-+    char *phyTrailer;
-+
-+    phyTrailer = &data[len];
-+    if (fromLAN) {
-+        /* LAN ports: Use default settings, as per mvPhyInfo */
-+        phyTrailer[0] = 0x00;
-+        phyTrailer[1] = 0x00;
-+    } else {
-+        /* WAN port: Direct to WAN port */
-+        phyTrailer[0] = MV_INGRESS_TRAILER_OVERRIDE;
-+        phyTrailer[1] = 1 << MV_WAN_PORT;
-+    }
-+    phyTrailer[2] = 0x00;
-+    phyTrailer[3] = 0x00;
-+}
-+#endif
-+
-+
-+/*****************************************************************************
-+*
-+* Validate that the specified PHY unit number is a valid PHY ID.
-+* Print a message if it is invalid.
-+* RETURNS
-+*   TRUE  --> valid
-+*   FALSE --> invalid
-+*/
-+LOCAL BOOL
-+mv_validPhyId(int phyUnit)
-+{
-+    if ((phyUnit >= MV_ID_MIN) && (phyUnit <= MV_ID_MAX)) {
-+        return TRUE;
-+    } else {
-+        PRINTF("PHY unit number must be in the range [%d..%d]\n",
-+            MV_ID_MIN, MV_ID_MAX);
-+        return FALSE;
-+    } 
-+}
-+
-+
-+/*****************************************************************************
-+*
-+* mv_waitWhileATUBusy - spins until the ATU completes
-+* its previous operation.
-+*/
-+LOCAL void
-+mv_waitWhileATUBusy(UINT32 phyBase)
-+{
-+    BOOL   isBusy;
-+    UINT16 ATUOperation;
-+
-+    do {
-+
-+        ATUOperation = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR,
-+                                  MV_ATU_OPERATION);
-+
-+        isBusy = (ATUOperation & MV_ATU_BUSY_MASK) == MV_ATU_IS_BUSY;
-+
-+    } while(isBusy);
-+}
-+
-+/*****************************************************************************
-+*
-+* mv_flushATUDB - flushes ALL entries in the Address Translation Unit
-+* DataBase associated with phyUnit.  [Since we use a single DB for
-+* all PHYs, this flushes the entire shared DataBase.]
-+*
-+* The current implementation flushes even more than absolutely needed --
-+* it flushes all entries for all phyUnits on the same ethernet as the
-+* specified phyUnit.
-+*
-+* It is called only when a link failure is detected on a port that was
-+* previously working.  In other words, when the cable is unplugged.
-+*/
-+void
-+mv_flushATUDB(int phyUnit)
-+{
-+    UINT32 phyBase;
-+
-+    if (!mv_validPhyId(phyUnit)) {
-+        PRINTF("Invalid port number: %d\n", phyUnit);
-+        return;
-+    }
-+
-+    phyBase = MV_PHYBASE(phyUnit);
-+    
-+    /* Wait for previous operation (if any) to complete */
-+    mv_waitWhileATUBusy(phyBase);
-+
-+    /* Tell hardware to flush all entries */
-+    phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_OPERATION, 
-+                MV_ATU_OP_FLUSH_ALL | MV_ATU_IS_BUSY);
-+
-+    mv_waitWhileATUBusy(phyBase);
-+}
-+ 
-+/*****************************************************************************
-+*
-+* mv_phyCheckStatusChange -- checks for significant changes in PHY state.
-+*
-+* A "significant change" is:
-+*     dropped link (e.g. ethernet cable unplugged) OR
-+*     autonegotiation completed + link (e.g. ethernet cable plugged in)
-+*/
-+void
-+mv_phyCheckStatusChange(int ethUnit)
-+{
-+    int           phyUnit;
-+    UINT16        phyHwStatus;
-+    mvPhyInfo_t   *lastStatus;
-+    int           linkCount   = 0;
-+    int           lostLinks   = 0;
-+    int           gainedLinks = 0;
-+    UINT32        phyBase;
-+    UINT32        phyAddr;
-+
-+    for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
-+        if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+
-+        phyBase = MV_PHYBASE(phyUnit);
-+        phyAddr = MV_PHYADDR(phyUnit);
-+
-+        lastStatus = &mvPhyInfo[phyUnit];
-+        phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS);
-+
-+        if (lastStatus->isPhyAlive) { /* last known link status was ALIVE */
-+            /* See if we've lost link */
-+            if (phyHwStatus & MV_STATUS_REAL_TIME_LINK_UP) {
-+                linkCount++;
-+            } else {
-+                lostLinks++;
-+                mv_flushATUDB(phyUnit);
-+                MV_PRINT(MV_DEBUG_PHYCHANGE,("\nethmac%d port%d down\n",
-+                                               ethUnit, phyUnit));
-+                lastStatus->isPhyAlive = FALSE;
-+            }
-+        } else { /* last known link status was DEAD */
-+            /* Check for AutoNegotiation complete */
-+            if (MV_AUTONEG_DONE(phyHwStatus)) {
-+                gainedLinks++;
-+		linkCount++;
-+                MV_PRINT(MV_DEBUG_PHYCHANGE,("\nethmac%d port%d up\n",
-+                                               ethUnit, phyUnit));
-+                lastStatus->isPhyAlive = TRUE;
-+            }
-+        }
-+    }
-+
-+    if (linkCount == 0) {
-+        if (lostLinks) {
-+            /* We just lost the last link for this MAC */
-+            phyLinkLost(ethUnit);
-+        }
-+    } else {
-+        if (gainedLinks == linkCount) {
-+            /* We just gained our first link(s) for this MAC */
-+            phyLinkGained(ethUnit);
-+        }
-+    }
-+}
-+
-+#if DEBUG
-+
-+/* Define the registers of interest for a phyShow command */
-+typedef struct mvRegisterTableEntry_s {
-+    UINT32 regNum;
-+    char  *regIdString;
-+} mvRegisterTableEntry_t;
-+
-+mvRegisterTableEntry_t mvPhyRegisterTable[] = {
-+    {MV_PHY_CONTROL,                 "PHY Control                     "},
-+    {MV_PHY_STATUS,                  "PHY Status                      "},
-+    {MV_PHY_ID1,                     "PHY Identifier 1                "},
-+    {MV_PHY_ID2,                     "PHY Identifier 2                "},
-+    {MV_AUTONEG_ADVERT,              "Auto-Negotiation Advertisement  "},
-+    {MV_LINK_PARTNER_ABILITY,        "Link Partner Ability            "},
-+    {MV_AUTONEG_EXPANSION,           "Auto-Negotiation Expansion      "},
-+    {MV_NEXT_PAGE_TRANSMIT,          "Next Page Transmit              "},
-+    {MV_LINK_PARTNER_NEXT_PAGE,      "Link Partner Next Page          "},
-+    {MV_PHY_SPECIFIC_CONTROL_1,      "PHY-Specific Control Register 1 "},
-+    {MV_PHY_SPECIFIC_STATUS,         "PHY-Specific Status             "},
-+    {MV_PHY_INTERRUPT_ENABLE,        "PHY Interrupt Enable            "},
-+    {MV_PHY_INTERRUPT_STATUS,        "PHY Interrupt Status            "},
-+    {MV_PHY_INTERRUPT_PORT_SUMMARY,  "PHY Interrupt Port Summary      "},
-+    {MV_RECEIVE_ERROR_COUNTER,       "Receive Error Counter           "},
-+    {MV_LED_PARALLEL_SELECT,         "LED Parallel Select             "},
-+    {MV_LED_STREAM_SELECT_LEDS,      "LED Stream Select               "},
-+    {MV_PHY_LED_CONTROL,             "PHY LED Control                 "},
-+    {MV_PHY_MANUAL_LED_OVERRIDE,     "PHY Manual LED Override         "},
-+    {MV_VCT_CONTROL,                 "VCT Control                     "},
-+    {MV_VCT_STATUS,                  "VCT Status                      "},
-+    {MV_PHY_SPECIFIC_CONTROL_2,      "PHY-Specific Control Register 2 "},
-+};
-+int mvPhyNumRegs = sizeof(mvPhyRegisterTable) / sizeof(mvPhyRegisterTable[0]);
-+
-+
-+mvRegisterTableEntry_t mvSwitchPortRegisterTable[] = {
-+    {MV_PORT_STATUS,              "Port Status             "},
-+    {MV_SWITCH_ID,                "Switch ID               "},
-+    {MV_PORT_CONTROL,             "Port Control            "},
-+    {MV_PORT_BASED_VLAN_MAP,      "Port-Based VLAN Map     "},
-+    {MV_PORT_ASSOCIATION_VECTOR,  "Port Association Vector "},
-+    {MV_RX_COUNTER,               "RX Counter              "},
-+    {MV_TX_COUNTER,               "TX Counter              "},
-+};
-+int mvSwitchPortNumRegs =
-+    sizeof(mvSwitchPortRegisterTable) / sizeof(mvSwitchPortRegisterTable[0]);
-+
-+
-+mvRegisterTableEntry_t mvSwitchGlobalRegisterTable[] = {
-+    {MV_SWITCH_GLOBAL_STATUS,  "Switch Global Status  "},
-+    {MV_SWITCH_MAC_ADDR0,      "Switch MAC Addr 0 & 1 "},
-+    {MV_SWITCH_MAC_ADDR2,      "Switch MAC Addr 2 & 3 "},
-+    {MV_SWITCH_MAC_ADDR4,      "Switch MAC Addr 4 & 5 "},
-+    {MV_SWITCH_GLOBAL_CONTROL, "Switch Global Control "},
-+    {MV_ATU_CONTROL,           "ATU Control           "},
-+    {MV_ATU_OPERATION,         "ATU Operation         "},
-+    {MV_ATU_DATA,              "ATU Data              "},
-+    {MV_ATU_MAC_ADDR0,         "ATU MAC Addr 0 & 1    "},
-+    {MV_ATU_MAC_ADDR2,         "ATU MAC Addr 2 & 3    "},
-+    {MV_ATU_MAC_ADDR4,         "ATU MAC Addr 4 & 5    "},
-+};
-+int mvSwitchGlobalNumRegs =
-+    sizeof(mvSwitchGlobalRegisterTable) / sizeof(mvSwitchGlobalRegisterTable[0]);
-+
-+void my_mvPhyShow(int ethUnit)
-+{
-+    int phyUnit;
-+    for (phyUnit=0; (phyUnit < MV_PHY_MAX); phyUnit++) {
-+        if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
-+            continue;
-+        }
-+	mv_phyShow(phyUnit);
-+    }
-+}
-+
-+/*****************************************************************************
-+*
-+* mv_phyShow - Dump the state of a PHY.
-+* There are two sets of registers for each phy port:
-+*  "phy registers" and
-+*  "switch port registers"
-+* We dump 'em all, plus the switch global registers.
-+*/
-+void
-+mv_phyShow(int phyUnit)
-+{
-+    int     i;
-+    UINT16  value;
-+    UINT32  phyBase;
-+    UINT32  phyAddr;
-+    UINT32  switchPortAddr;
-+
-+    if (!mv_validPhyId(phyUnit)) {
-+        return;
-+    }
-+
-+    phyBase        = MV_PHYBASE(phyUnit);
-+    phyAddr        = MV_PHYADDR(phyUnit);
-+    switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit);
-+
-+    printk("PHY state for PHY%d (ethmac%d, phyBase 0x%8x, phyAddr 0x%x, switchAddr 0x%x)\n",
-+           phyUnit,
-+           MV_ETHUNIT(phyUnit),
-+           MV_PHYBASE(phyUnit),
-+           MV_PHYADDR(phyUnit),
-+           MV_SWITCH_PORT_ADDR(phyUnit));
-+
-+    printk("PHY Registers:\n");
-+    for (i=0; i < mvPhyNumRegs; i++) {
-+
-+        value = phyRegRead(phyBase, phyAddr, mvPhyRegisterTable[i].regNum);
-+
-+        printk("Reg %02d (0x%02x) %s = 0x%08x\n",
-+               mvPhyRegisterTable[i].regNum,
-+               mvPhyRegisterTable[i].regNum,
-+               mvPhyRegisterTable[i].regIdString,
-+               value);
-+    }
-+
-+    printk("Switch Port Registers:\n");
-+    for (i=0; i < mvSwitchPortNumRegs; i++) {
-+
-+        value = phyRegRead(phyBase, switchPortAddr,
-+                           mvSwitchPortRegisterTable[i].regNum);
-+
-+        printk("Reg %02d (0x%02x) %s = 0x%08x\n",
-+               mvSwitchPortRegisterTable[i].regNum,
-+               mvSwitchPortRegisterTable[i].regNum,
-+               mvSwitchPortRegisterTable[i].regIdString,
-+               value);
-+    }
-+
-+    printk("Switch Global Registers:\n");
-+    for (i=0; i < mvSwitchGlobalNumRegs; i++) {
-+
-+        value = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR,
-+                           mvSwitchGlobalRegisterTable[i].regNum);
-+
-+        printk("Reg %02d (0x%02x) %s = 0x%08x\n",
-+               mvSwitchGlobalRegisterTable[i].regNum,
-+               mvSwitchGlobalRegisterTable[i].regNum,
-+               mvSwitchGlobalRegisterTable[i].regIdString,
-+               value);
-+    }
-+}
-+
-+/*****************************************************************************
-+*
-+* mv_phySet - Modify the value of a PHY register (debug only).
-+*/
-+void
-+mv_phySet(int phyUnit, UINT32 regnum, UINT32 value)
-+{
-+    UINT32  phyBase;
-+    UINT32  phyAddr;
-+
-+    if (mv_validPhyId(phyUnit)) {
-+
-+        phyBase = MV_PHYBASE(phyUnit);
-+        phyAddr = MV_PHYADDR(phyUnit);
-+
-+        phyRegWrite(phyBase, phyAddr, regnum, value);
-+    }
-+}
-+
-+
-+/*****************************************************************************
-+*
-+* mv_switchPortSet - Modify the value of a switch port register (debug only).
-+*/
-+void
-+mv_switchPortSet(int phyUnit, UINT32 regnum, UINT32 value)
-+{
-+    UINT32  phyBase;
-+    UINT32  switchPortAddr;
-+
-+    if (mv_validPhyId(phyUnit)) {
-+
-+        phyBase = MV_PHYBASE(phyUnit);
-+        switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit);
-+
-+        phyRegWrite(phyBase, switchPortAddr, regnum, value);
-+    }
-+}
-+ 
-+/*****************************************************************************
-+*
-+* mv_switchGlobalSet - Modify the value of a switch global register
-+* (debug only).
-+*/
-+void
-+mv_switchGlobalSet(int phyUnit, UINT32 regnum, UINT32 value)
-+{
-+    UINT32  phyBase;
-+
-+    if (mv_validPhyId(phyUnit)) {
-+
-+        phyBase = MV_PHYBASE(phyUnit);
-+
-+        phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, regnum, value);
-+    }
-+}
-+
-+/*****************************************************************************
-+*
-+* mv_showATUDB - Dump the contents of the Address Translation Unit DataBase
-+* for the PHY switch associated with the specified phy.
-+*/
-+void
-+mv_showATUDB(int phyUnit)
-+{
-+    UINT32 phyBase;
-+    UINT16 ATUData;
-+    UINT16 ATUMac0;
-+    UINT16 ATUMac2;
-+    UINT16 ATUMac4;
-+    int portVec;
-+    int entryState;
-+
-+    if (!mv_validPhyId(phyUnit)) {
-+        printk("Invalid port number: %d\n", phyUnit);
-+        return;
-+    }
-+
-+    phyBase = MV_PHYBASE(phyUnit);
-+    
-+    /* Wait for previous operation (if any) to complete */
-+    mv_waitWhileATUBusy(phyBase);
-+
-+    /* Initialize ATU MAC to all 1's */
-+    phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR0, 0xffff);
-+    phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR2, 0xffff);
-+    phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR4, 0xffff);
-+
-+    printk("   MAC ADDRESS    EntryState PortVector\n");
-+
-+    for(;;) {
-+        /* Tell hardware to get next MAC info */
-+        phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_OPERATION, 
-+                    MV_ATU_OP_GET_NEXT | MV_ATU_IS_BUSY);
-+
-+        mv_waitWhileATUBusy(phyBase);
-+
-+        ATUData = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_DATA);
-+        entryState = (ATUData & MV_ENTRYSTATE_MASK) >> MV_ENTRYSTATE_SHIFT;
-+
-+        if (entryState == 0) {
-+            /* We've hit the end of the list */
-+            break;
-+        }
-+
-+        ATUMac0 = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR0);
-+        ATUMac2 = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR2);
-+        ATUMac4 = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR4);
-+
-+        portVec    = (ATUData & MV_PORTVEC_MASK) >> MV_PORTVEC_SHIFT;
-+
-+        printk("%02x:%02x:%02x:%02x:%02x:%02x    0x%02x       0x%02x\n",
-+               ATUMac0 >> 8,    /* MAC byte 0 */
-+               ATUMac0 & 0xff,  /* MAC byte 1 */
-+               ATUMac2 >> 8,    /* MAC byte 2 */
-+               ATUMac2 & 0xff,  /* MAC byte 3 */
-+               ATUMac4 >> 8,    /* MAC byte 4 */
-+               ATUMac4 & 0xff,  /* MAC byte 5 */
-+               entryState,
-+               portVec);
-+    }
-+}
-+
-+LOCAL BOOL countingGoodFrames;
-+
-+/*****************************************************************************
-+*
-+* mv_countGoodFrames - starts counting GOOD RX/TX frames per port
-+*/
-+void
-+mv_countGoodFrames(int phyUnit)
-+{
-+    UINT32 phyBase;
-+    UINT16 globalControl;
-+
-+    if (mv_validPhyId(phyUnit)) {
-+        /*
-+         * Guarantee that counters are cleared by
-+         * forcing CtrMode to toggle and end on GOODFRAMES.
-+         */
-+
-+        phyBase = MV_PHYBASE(phyUnit);
-+
-+        /* Read current Switch Global Control Register */
-+        globalControl = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR,
-+                                   MV_SWITCH_GLOBAL_CONTROL);
-+
-+        /* Set CtrMode to count BAD frames */
-+        globalControl = ((globalControl & ~MV_CTRMODE_MASK) |
-+                         MV_CTRMODE_BADFRAMES);
-+
-+        /* Push new value out to hardware */
-+        phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR,
-+                    MV_SWITCH_GLOBAL_CONTROL, globalControl);
-+
-+        /* Now toggle CtrMode to count GOOD frames */
-+        globalControl = ((globalControl & ~MV_CTRMODE_MASK) |
-+                         MV_CTRMODE_GOODFRAMES);
-+
-+        /* Push new value out to hardware */
-+        phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR,
-+                    MV_SWITCH_GLOBAL_CONTROL, globalControl);
-+
-+        countingGoodFrames = TRUE;
-+    }
-+}
-+
-+/*****************************************************************************
-+*
-+* mv_countBadFrames - starts counting BAD RX/TX frames per port
-+*/
-+void
-+mv_countBadFrames(int phyUnit)
-+{
-+    UINT32 phyBase;
-+    UINT16 globalControl;
-+
-+    if (mv_validPhyId(phyUnit)) {
-+        /*
-+         * Guarantee that counters are cleared by
-+         * forcing CtrMode to toggle and end on BADFRAMES.
-+         */
-+
-+        phyBase = MV_PHYBASE(phyUnit);
-+
-+        /* Read current Switch Global Control Register */
-+        globalControl = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR,
-+                                   MV_SWITCH_GLOBAL_CONTROL);
-+
-+        /* Set CtrMode to count GOOD frames */
-+        globalControl = ((globalControl & ~MV_CTRMODE_MASK) |
-+                         MV_CTRMODE_GOODFRAMES);
-+
-+        /* Push new value out to hardware */
-+        phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR,
-+                    MV_SWITCH_GLOBAL_CONTROL, globalControl);
-+
-+        /* Now toggle CtrMode to count BAD frames */
-+        globalControl = ((globalControl & ~MV_CTRMODE_MASK) |
-+                         MV_CTRMODE_BADFRAMES);
-+
-+        /* Push new value out to hardware */
-+        phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR,
-+                    MV_SWITCH_GLOBAL_CONTROL, globalControl);
-+
-+        countingGoodFrames = FALSE;
-+    }
-+}
-+
-+/*****************************************************************************
-+*
-+* mv_showFrameCounts - shows current GOOD/BAD Frame counts
-+*/
-+void
-+mv_showFrameCounts(int phyUnit)
-+{
-+    UINT16 rxCounter;
-+    UINT16 txCounter;
-+    UINT32 phyBase;
-+    UINT32 switchPortAddr;
-+
-+    if (!mv_validPhyId(phyUnit)) {
-+        return;
-+    }
-+
-+    phyBase = MV_PHYBASE(phyUnit);
-+    switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit);
-+
-+    rxCounter = phyRegRead(phyBase, switchPortAddr, MV_RX_COUNTER);
-+
-+    txCounter = phyRegRead(phyBase, switchPortAddr, MV_TX_COUNTER);
-+
-+    printk("port%d %s frames: receive: %05d   transmit: %05d\n",
-+           phyUnit,
-+           (countingGoodFrames ? "good" : "error"),
-+           rxCounter,
-+           txCounter);
-+}
-+#endif
-diff -urN linux-mips-orig/drivers/net/ath/mvPhy.h linux-mips-new/drivers/net/ath/mvPhy.h
---- linux-mips-orig/drivers/net/ath/mvPhy.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/mvPhy.h	2005-12-31 12:33:57.727530616 +0000
-@@ -0,0 +1,162 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * mvPhy.h - definitions for the ethernet PHY -- Marvell 88E6060
-+ * All definitions in this file are operating system independent!
-+ */
-+
-+#ifndef MVPHY_H
-+#define MVPHY_H
-+
-+/*****************/
-+/* PHY Registers */
-+/*****************/
-+#define MV_PHY_CONTROL                 0
-+#define MV_PHY_STATUS                  1
-+#define MV_PHY_ID1                     2
-+#define MV_PHY_ID2                     3
-+#define MV_AUTONEG_ADVERT              4
-+#define MV_LINK_PARTNER_ABILITY        5
-+#define MV_AUTONEG_EXPANSION           6
-+#define MV_NEXT_PAGE_TRANSMIT          7
-+#define MV_LINK_PARTNER_NEXT_PAGE      8
-+#define MV_PHY_SPECIFIC_CONTROL_1     16
-+#define MV_PHY_SPECIFIC_STATUS        17
-+#define MV_PHY_INTERRUPT_ENABLE       18
-+#define MV_PHY_INTERRUPT_STATUS       19
-+#define MV_PHY_INTERRUPT_PORT_SUMMARY 20
-+#define MV_RECEIVE_ERROR_COUNTER      21
-+#define MV_LED_PARALLEL_SELECT        22
-+#define MV_LED_STREAM_SELECT_LEDS     23
-+#define MV_PHY_LED_CONTROL            24
-+#define MV_PHY_MANUAL_LED_OVERRIDE    25
-+
-+#define MV_VCT_CONTROL                26
-+#define MV_VCT_STATUS                 27
-+#define MV_PHY_SPECIFIC_CONTROL_2     28
-+
-+/* MV_PHY_CONTROL fields */
-+#define MV_CTRL_SOFTWARE_RESET                    0x8000
-+#define MV_CTRL_AUTONEGOTIATION_ENABLE            0x1000
-+#define MV_CTRL_FULL_DUPLEX			  0x0100
-+#define MV_CTRL_100_MBPS			  0x2000
-+
-+/* MV_PHY_ID1 fields */
-+#define MV_PHY_ID1_EXPECTATION                    0x0141 /* OUI >> 6 */
-+
-+/* MV_PHY_ID2 fields */
-+#define MV_OUI_LSB_MASK                           0xfc00
-+#define MV_OUI_LSB_EXPECTATION                    0x0c00
-+#define MV_OUI_LSB_SHIFT                              10
-+#define MV_MODEL_NUM_MASK                         0x03f0
-+#define MV_MODEL_NUM_SHIFT                             4
-+#define MV_REV_NUM_MASK                           0x000f
-+#define MV_REV_NUM_SHIFT                               0
-+
-+/* MV_PHY_SPECIFIC_STATUS fields */
-+#define MV_STATUS_RESOLVED_SPEED_100              0x4000
-+#define MV_STATUS_RESOLVED_DUPLEX_FULL            0x2000
-+#define MV_STATUS_RESOLVED                        0x0800
-+#define MV_STATUS_REAL_TIME_LINK_UP               0x0400
-+
-+/* Check if autonegotiation is complete and link is up */
-+#define MV_AUTONEG_DONE(mv_phy_specific_status)                   \
-+    (((mv_phy_specific_status) &                                  \
-+        (MV_STATUS_RESOLVED | MV_STATUS_REAL_TIME_LINK_UP)) ==    \
-+        (MV_STATUS_RESOLVED | MV_STATUS_REAL_TIME_LINK_UP))
-+
-+
-+/*************************/
-+/* Switch Port Registers */
-+/*************************/
-+#define MV_PORT_STATUS                 0
-+#define MV_SWITCH_ID                   3
-+#define MV_PORT_CONTROL                4
-+#define MV_PORT_BASED_VLAN_MAP         6
-+#define MV_PORT_ASSOCIATION_VECTOR    11
-+#define MV_RX_COUNTER                 16
-+#define MV_TX_COUNTER                 17
-+
-+/* MV_SWITCH_ID fields */
-+#define MV_SWITCH_ID_DEV_MASK                       0xfff0
-+#define MV_SWITCH_ID_DEV_EXPECTATION                0x0600
-+#define MV_SWITCH_ID_DEV_SHIFT                           4
-+#define MV_SWITCH_ID_REV_MASK                       0x000f
-+#define MV_SWITCH_ID_REV_SHIFT                           0
-+
-+/* MV_PORT_CONTROL fields */
-+#define MV_PORT_CONTROL_PORT_STATE_MASK             0x0003
-+#define MV_PORT_CONTROL_PORT_STATE_DISABLED         0x0000
-+#define MV_PORT_CONTROL_PORT_STATE_FORWARDING       0x0003
-+
-+#define MV_PORT_CONTROL_EGRESS_MODE                 0x0100 /* Receive */
-+#define MV_PORT_CONTROL_INGRESS_TRAILER             0x4000 /* Transmit */
-+
-+#define MV_EGRESS_TRAILER_VALID                       0x80
-+#define MV_INGRESS_TRAILER_OVERRIDE                   0x80
-+
-+#define MV_PHY_TRAILER_SIZE                              4
-+
-+
-+/***************************/
-+/* Switch Global Registers */
-+/***************************/
-+#define MV_SWITCH_GLOBAL_STATUS        0
-+#define MV_SWITCH_MAC_ADDR0            1
-+#define MV_SWITCH_MAC_ADDR2            2
-+#define MV_SWITCH_MAC_ADDR4            3
-+#define MV_SWITCH_GLOBAL_CONTROL       4
-+#define MV_ATU_CONTROL                10
-+#define MV_ATU_OPERATION              11
-+#define MV_ATU_DATA                   12
-+#define MV_ATU_MAC_ADDR0              13
-+#define MV_ATU_MAC_ADDR2              14
-+#define MV_ATU_MAC_ADDR4              15
-+
-+/* MV_SWITCH_GLOBAL_STATUS fields */
-+#define MV_SWITCH_STATUS_READY_MASK  0x0800
-+
-+/* MV_SWITCH_GLOBAL_CONTROL fields */
-+#define MV_CTRMODE_MASK              0x0100
-+#define MV_CTRMODE_GOODFRAMES        0x0000
-+#define MV_CTRMODE_BADFRAMES         0x0100
-+
-+/* MV_ATU_CONTROL fields */
-+#define MV_ATUCTRL_ATU_SIZE_MASK     0x3000
-+#define MV_ATUCTRL_ATU_SIZE_SHIFT        12
-+#define MV_ATUCTRL_ATU_SIZE_DEFAULT       2 /* 1024 entry database */
-+#define MV_ATUCTRL_AGE_TIME_MASK     0x0ff0
-+#define MV_ATUCTRL_AGE_TIME_SHIFT         4
-+#define MV_ATUCTRL_AGE_TIME_DEFAULT      19 /* 19 * 16 = 304 seconds */
-+
-+/* MV_ATU_OPERATION fields */
-+#define MV_ATU_BUSY_MASK             0x8000
-+#define MV_ATU_IS_BUSY               0x8000
-+#define MV_ATU_IS_FREE               0x0000
-+#define MV_ATU_OP_MASK               0x7000
-+#define MV_ATU_OP_FLUSH_ALL          0x1000
-+#define MV_ATU_OP_GET_NEXT           0x4000
-+
-+/* MV_ATU_DATA fields */
-+#define MV_ENTRYPRI_MASK             0xc000
-+#define MV_ENTRYPRI_SHIFT                14
-+#define MV_PORTVEC_MASK              0x03f0
-+#define MV_PORTVEC_SHIFT                  4
-+#define MV_ENTRYSTATE_MASK           0x000f
-+#define MV_ENTRYSTATE_SHIFT               0
-+
-+/* PHY Address for the switch itself */
-+#define MV_SWITCH_GLOBAL_ADDR 0x1f
-+
-+BOOL    mv_phySetup(int ethUnit, UINT32 phyBase);
-+void    mv_phyCheckStatusChange(int ethUnit);
-+BOOL    mv_phyIsSpeed100(int ethUnit);
-+int     mv_phyIsFullDuplex(int ethUnit);
-+
-+#endif /* MVPHY_H */
-diff -urN linux-mips-orig/drivers/net/ath/rtPhy.c linux-mips-new/drivers/net/ath/rtPhy.c
---- linux-mips-orig/drivers/net/ath/rtPhy.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/rtPhy.c	2005-12-31 12:33:57.727530616 +0000
-@@ -0,0 +1,272 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * Manage the ethernet PHY.
-+ * This code supports a simple 1-port ethernet phy, Realtek RTL8201BL,
-+ * and compatible PHYs, such as the Kendin KS8721B.
-+ * All definitions in this file are operating system independent!
-+ */
-+
-+#if defined(linux)
-+#include <linux/config.h>
-+#include <linux/types.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/delay.h>
-+
-+#include "ar531xlnx.h"
-+#endif
-+
-+#if defined(__ECOS)
-+#include "ae531xecos.h"
-+#endif
-+
-+
-+#include "ae531xmac.h"
-+#include "ae531xreg.h"
-+#include "rtPhy.h"
-+
-+#if /* DEBUG */ 1
-+#define RT_DEBUG_ERROR     0x00000001
-+#define RT_DEBUG_PHYSETUP  0x00000002
-+#define RT_DEBUG_PHYCHANGE 0x00000004
-+
-+int rtPhyDebug = RT_DEBUG_ERROR;
-+
-+#define RT_PRINT(FLG, X)                            \
-+{                                                   \
-+    if (rtPhyDebug & (FLG)) {                       \
-+        DEBUG_PRINTF X;                             \
-+    }                                               \
-+}
-+#else
-+#define RT_PRINT(FLG, X)
-+#endif
-+
-+/*
-+ * Track per-PHY port information.
-+ */
-+typedef struct {
-+    BOOL   phyAlive;    /* last known state of link */
-+    UINT32 phyBase;
-+    UINT32 phyAddr;
-+} rtPhyInfo_t;
-+
-+#define ETH_PHY_ADDR		1
-+
-+/*
-+ * This table defines the mapping from phy units to
-+ * per-PHY information.
-+ *
-+ * This table is somewhat board-dependent.
-+ */
-+rtPhyInfo_t rtPhyInfo[] = {
-+    {phyAlive: FALSE,  /* PHY 0 */
-+     phyBase: 0,       /* filled in by rt_phySetup */
-+     phyAddr: ETH_PHY_ADDR},                             
-+
-+    {phyAlive: FALSE,  /* PHY 1 */
-+     phyBase: 0,       /* filled in by rt_phySetup */
-+     phyAddr: ETH_PHY_ADDR}
-+};
-+
-+/* Convert from phy unit# to (phyBase, phyAddr) pair */
-+#define RT_PHYBASE(phyUnit) (rtPhyInfo[phyUnit].phyBase)
-+#define RT_PHYADDR(phyUnit) (rtPhyInfo[phyUnit].phyAddr)
-+
-+
-+/******************************************************************************
-+*
-+* rt_phySetup - reset and setup the PHY associated with
-+* the specified MAC unit number.
-+*
-+* Resets the associated PHY port.
-+*
-+* RETURNS:
-+*    TRUE  --> associated PHY is alive
-+*    FALSE --> no LINKs on this ethernet unit
-+*/
-+
-+BOOL
-+rt_phySetup(int ethUnit, UINT32 phyBase)
-+{
-+    BOOL    linkAlive = FALSE;
-+    UINT32  phyAddr;
-+
-+    RT_PHYBASE(ethUnit) = phyBase;
-+
-+    phyAddr = RT_PHYADDR(ethUnit);
-+
-+    /* Reset phy */
-+    phyRegWrite(phyBase, phyAddr, GEN_ctl, PHY_SW_RST | AUTONEGENA);
-+
-+    sysMsDelay(1500);
-+
-+    return linkAlive;
-+}
-+
-+/******************************************************************************
-+*
-+* rt_phyIsDuplexFull - Determines whether the phy ports associated with the
-+* specified device are FULL or HALF duplex.
-+*
-+* RETURNS:
-+*    1  --> FULL
-+*    0 --> HALF
-+*/
-+int
-+rt_phyIsFullDuplex(int ethUnit)
-+{
-+    UINT16  phyCtl;
-+    UINT32  phyBase;
-+    UINT32  phyAddr;
-+
-+    phyBase = RT_PHYBASE(ethUnit);
-+    phyAddr = RT_PHYADDR(ethUnit);
-+
-+    phyCtl = phyRegRead(phyBase, phyAddr, GEN_ctl);
-+
-+    if (phyCtl & DUPLEX) {
-+        return 1;
-+    } else {
-+        return 0;
-+    }
-+}
-+
-+/******************************************************************************
-+*
-+* rt_phyIsSpeed100 - Determines the speed of phy ports associated with the
-+* specified device.
-+*
-+* RETURNS:
-+*    TRUE --> 100Mbit
-+*    FALSE --> 10Mbit
-+*/
-+BOOL
-+rt_phyIsSpeed100(int phyUnit)
-+{
-+    UINT16  phyLpa;
-+    UINT32  phyBase;
-+    UINT32  phyAddr;
-+
-+    phyBase = RT_PHYBASE(phyUnit);
-+    phyAddr = RT_PHYADDR(phyUnit);
-+
-+    phyLpa = phyRegRead(phyBase, phyAddr, AN_lpa);
-+
-+    if (phyLpa & (LPA_TXFD | LPA_TX)) {
-+        return TRUE;
-+    } else {
-+        return FALSE;
-+    }
-+}
-+
-+/*****************************************************************************
-+*
-+* rt_phyCheckStatusChange -- checks for significant changes in PHY state.
-+*
-+* A "significant change" is:
-+*     dropped link (e.g. ethernet cable unplugged) OR
-+*     autonegotiation completed + link (e.g. ethernet cable plugged in)
-+*
-+* On AR5311, there is a 1-to-1 mapping of ethernet units to PHYs.
-+* When a PHY is plugged in, phyLinkGained is called.
-+* When a PHY is unplugged, phyLinkLost is called.
-+*/
-+void
-+rt_phyCheckStatusChange(int ethUnit)
-+{
-+    UINT16          phyHwStatus;
-+    rtPhyInfo_t     *lastStatus = &rtPhyInfo[ethUnit];
-+    UINT32          phyBase;
-+    UINT32          phyAddr;
-+
-+    phyBase = RT_PHYBASE(ethUnit);
-+    phyAddr = RT_PHYADDR(ethUnit);
-+
-+    phyHwStatus = phyRegRead(phyBase, phyAddr, GEN_sts);
-+
-+    if (lastStatus->phyAlive) { /* last known status was ALIVE */
-+        /* See if we've lost link */
-+        if (!(phyHwStatus & LINK)) {
-+            RT_PRINT(RT_DEBUG_PHYCHANGE,("\nethmac%d link down\n", ethUnit));
-+            lastStatus->phyAlive = FALSE;
-+            phyLinkLost(ethUnit);
-+        }
-+    } else { /* last known status was DEAD */
-+        /* Check for AN complete */
-+        if ((phyHwStatus & (AUTOCMPLT | LINK)) == (AUTOCMPLT | LINK)) {
-+            RT_PRINT(RT_DEBUG_PHYCHANGE,("\nethmac%d link up\n", ethUnit));
-+            lastStatus->phyAlive = TRUE;
-+            phyLinkGained(ethUnit);
-+        }
-+    }
-+}
-+
-+#if DEBUG
-+
-+/* Define the PHY registers of interest for a phyShow command */
-+struct rtRegisterTable_s {
-+    UINT32 regNum;
-+    char  *regIdString;
-+} rtRegisterTable[] =
-+{
-+    {GEN_ctl,    "Basic Mode Control (GEN_ctl)    "},
-+    {GEN_sts,    "Basic Mode Status (GEN_sts)     "},
-+    {GEN_id_hi,  "PHY Identifier 1 (GET_id_hi)    "},
-+    {GEN_id_lo,  "PHY Identifier 2 (GET_id_lo)    "},
-+    {AN_adv,     "Auto-Neg Advertisement (AN_adv) "},
-+    {AN_lpa,     "Auto-Neg Link Partner Ability   "},
-+    {AN_exp,     "Auto-Neg Expansion              "},
-+};
-+
-+int rtNumRegs = sizeof(rtRegisterTable) / sizeof(rtRegisterTable[0]);
-+
-+/*
-+ * Dump the state of a PHY.
-+ */
-+void
-+rt_phyShow(int phyUnit)
-+{
-+    int i;
-+    UINT16  value;
-+    UINT32  phyBase;
-+    UINT32  phyAddr;
-+
-+    phyBase = RT_PHYBASE(phyUnit);
-+    phyAddr = RT_PHYADDR(phyUnit);
-+
-+    printf("PHY state for ethphy%d\n", phyUnit);
-+
-+    for (i=0; i<rtNumRegs; i++) {
-+
-+        value = phyRegRead(phyBase, phyAddr, rtRegisterTable[i].regNum);
-+
-+        printf("Reg %02d (0x%02x) %s = 0x%08x\n",
-+            rtRegisterTable[i].regNum, rtRegisterTable[i].regNum,
-+            rtRegisterTable[i].regIdString, value);
-+    }
-+}
-+
-+/*
-+ * Modify the value of a PHY register.
-+ * This makes it a bit easier to modify PHY values during debug.
-+ */
-+void
-+rt_phySet(int phyUnit, UINT32 regnum, UINT32 value)
-+{
-+    UINT32  phyBase;
-+    UINT32  phyAddr;
-+
-+    phyBase = RT_PHYBASE(phyUnit);
-+    phyAddr = RT_PHYADDR(phyUnit);
-+
-+    phyRegWrite(phyBase, phyAddr, regnum, value);
-+}
-+#endif
-diff -urN linux-mips-orig/drivers/net/ath/rtPhy.h linux-mips-new/drivers/net/ath/rtPhy.h
---- linux-mips-orig/drivers/net/ath/rtPhy.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips-new/drivers/net/ath/rtPhy.h	2005-12-31 12:33:57.727530616 +0000
-@@ -0,0 +1,50 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ */
-+
-+/*
-+ * rtPhy.h - definitions for the ethernet PHY.
-+ * This code supports a simple 1-port ethernet phy, Realtek RTL8201BL,
-+ * and compatible PHYs, such as the Kendin KS8721B.
-+ * All definitions in this file are operating system independent!
-+ */
-+
-+#ifndef RTPHY_H
-+#define RTPHY_H
-+
-+/* MII Registers */
-+
-+#define	GEN_ctl		00
-+#define	GEN_sts		01
-+#define	GEN_id_hi	02
-+#define	GEN_id_lo	03
-+#define	AN_adv		04
-+#define	AN_lpa		05
-+#define	AN_exp		06
-+
-+/* GEN_ctl */ 
-+#define	PHY_SW_RST	0x8000
-+#define	LOOPBACK	0x4000
-+#define	SPEED		0x2000	/* 100 Mbit/s */
-+#define	AUTONEGENA	0x1000
-+#define	DUPLEX		0x0100	/* Duplex mode */
-+
-+		
-+/* GEN_sts */
-+#define	AUTOCMPLT	0x0020	/* Autonegotiation completed */
-+#define	LINK		0x0004	/* Link status */
-+
-+/* GEN_ids */
-+#define RT_PHY_ID1_EXPECTATION  0x22
-+
-+/* AN_lpa */
-+#define	LPA_TXFD	0x0100	/* Link partner supports 100 TX Full Duplex */
-+#define	LPA_TX		0x0080	/* Link partner supports 100 TX Half Duplex */
-+#define	LPA_10FD	0x0040	/* Link partner supports 10 BT Full Duplex */
-+#define	LPA_10		0x0020	/* Link partner supports 10 BT Half Duplex */
-+
-+#endif /* RTPHY_H */
-diff -urN linux-mips/include/linux/raid/md_p.h mips-linux-2.4.25/include/linux/raid/md_p.h
---- linux-mips/include/linux/raid/md_p.h	2005-12-24 15:12:07.189098448 +0000
-+++ mips-linux-2.4.25/include/linux/raid/md_p.h	2005-12-30 17:28:10.345721232 +0000
-@@ -151,10 +151,12 @@
- 	 */
- 	mdp_disk_t disks[MD_SB_DISKS];
- 
-+#if MD_SB_RESERVED_WORDS
- 	/*
- 	 * Reserved
- 	 */
- 	__u32 reserved[MD_SB_RESERVED_WORDS];
-+#endif
- 
- 	/*
- 	 * Active descriptor
diff --git a/openwrt/target/linux/ar7-2.4/Config.in b/openwrt/target/linux/ar7-2.4/Config.in
deleted file mode 100644
index 9d1fe7b813..0000000000
--- a/openwrt/target/linux/ar7-2.4/Config.in
+++ /dev/null
@@ -1,29 +0,0 @@
-config BR2_PACKAGE_KMOD_CPMAC
-	prompt "kmod-cpmac........................ AR7 CPMAC Network Driver"
-	tristate
-	default y
-	depends BR2_LINUX_2_4_AR7
-	help
-	  Driver for the AR7 CPMAC network chip
-
-config BR2_PACKAGE_KMOD_SANGAM_ATM_A
-	prompt "kmod-sangam-atm-annex-a........... AR7 Sangam ADSL Driver (Annex A)"
-	tristate
-	default m
-	depends BR2_LINUX_2_4_AR7
-	select BR2_PACKAGE_KMOD_ATM
-	help
-	  ATM driver for the Sangam ADSL chip on AR7
-	  Annex A version
-
-config BR2_PACKAGE_KMOD_SANGAM_ATM_B
-	prompt "kmod-sangam-atm-annex-b........... AR7 Sangam ADSL Driver (Annex B)"
-	tristate
-	default y
-	depends BR2_LINUX_2_4_AR7
-	select BR2_PACKAGE_KMOD_ATM
-	help
-	  ATM driver for the Sangam ADSL chip on AR7
-	  Annex B version
-
-
diff --git a/openwrt/target/linux/ar7-2.4/Makefile b/openwrt/target/linux/ar7-2.4/Makefile
deleted file mode 100644
index 10be12117b..0000000000
--- a/openwrt/target/linux/ar7-2.4/Makefile
+++ /dev/null
@@ -1,66 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-LINUX_VERSION:=2.4.32
-LINUX_RELEASE:=1
-LINUX_KERNEL_MD5SUM:=38f4d0830e95a20f4bfed17622d5557c
-
-include ../rules.mk
-include ./config
-
-ATM_FIRMWARE_VERSION:=0.4
-ATM_FIRMWARE_DIR=sangam-atm-firmware-$(ATM_FIRMWARE_VERSION)
-
-$(eval $(call KMOD_template,SANGAM_ATM_A,sangam-atm-annex-a,\
-	$(MODULES_DIR)/kernel/drivers/atm/tiatm.o \
-,CONFIG_MIPS_SANGAM_ATM,kmod-atm,60,tiatm, \
-	$(CP) $(BUILD_DIR)/$(ATM_FIRMWARE_DIR)/ar0700xx_a.bin $$(I_SANGAM_ATM_A)/lib/modules/ar0700xx.bin \
-))
-
-$(eval $(call KMOD_template,SANGAM_ATM_B,sangam-atm-annex-b,\
-	$(MODULES_DIR)/kernel/drivers/atm/tiatm.o \
-,CONFIG_MIPS_SANGAM_ATM,kmod-atm,60,tiatm, \
-	$(CP) $(BUILD_DIR)/$(ATM_FIRMWARE_DIR)/ar0700xx_b.bin $$(I_SANGAM_ATM_B)/lib/modules/ar0700xx.bin \
-))
-
-$(eval $(call KMOD_template,CPMAC,cpmac,\
-	$(MODULES_DIR)/kernel/drivers/net/avalanche_cpmac/avalanche_cpmac.o \
-,CONFIG_MIPS_AVALANCHE_CPMAC,,10,avalanche_cpmac))
-
-include ../generic-$(KERNEL)/modules.mk
-include ../kernel.mk
-
-
-$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
-	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
-	@$(CP) config $(LINUX_DIR)/.config
-	touch $@
-
-
-###############################################
-# ATM firmware for the DSL modem
-###############################################
-
-DOWNLOAD_SITE=http://openwrt.org/downloads/sources
-# extracted from netgear DG834B V1.0.5 GPL release
-ATM_FIRMWARE_FILE=$(ATM_FIRMWARE_DIR).tar.gz
-ATM_FIRMWARE_MD5SUM=8bfcb31109796502d66b11baaeb2fba6
-
-$(DL_DIR)/$(ATM_FIRMWARE_FILE):
-	$(SCRIPT_DIR)/download.pl $(DL_DIR) $(ATM_FIRMWARE_FILE) $(ATM_FIRMWARE_MD5SUM) $(DOWNLOAD_SITE) $(MAKE_TRACE)
-
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(ATM_FIRMWARE_FILE)
-$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.drivers-unpacked
-$(LINUX_DIR)/.modules_done: $(LINUX_DIR)/.drivers-unpacked
-
-$(LINUX_DIR)/.drivers-unpacked: $(LINUX_DIR)/.unpacked
-	-mkdir -p $(BUILD_DIR)
-	zcat $(DL_DIR)/$(ATM_FIRMWARE_FILE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-	touch $@
-
-linux-dirclean: drivers-clean
-
-drivers-clean:
-	rm -rf $(BUILD_DIR)/$(ATM_FIRMWARE_DIR)
-
-
diff --git a/openwrt/target/linux/ar7-2.4/config b/openwrt/target/linux/ar7-2.4/config
deleted file mode 100644
index 5f7a1513b7..0000000000
--- a/openwrt/target/linux/ar7-2.4/config
+++ /dev/null
@@ -1,1080 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MIPS=y
-CONFIG_MIPS32=y
-# CONFIG_MIPS64 is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_KMOD is not set
-
-#
-# Machine selection
-#
-# CONFIG_ACER_PICA_61 is not set
-CONFIG_AR7=y
-# CONFIG_AR7DB is not set
-# CONFIG_AR7RD is not set
-CONFIG_AR7WRD=y
-CONFIG_AR7_CPU=150
-CONFIG_AR7_SYS=125
-CONFIG_AR7_MEMORY=0x14000000
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_FICMMP is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_COGENT_CSB250 is not set
-# CONFIG_BAGET_MIPS is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_HP_LASERJET is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MAGNUM_4000 is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_BIG_SUR is not set
-# CONFIG_PMC_STRETCH is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
-# CONFIG_NEC_EAGLE is not set
-# CONFIG_OLIVETTI_M700 is not set
-# CONFIG_NINO is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_IRQ_CPU=y
-CONFIG_NONCOHERENT_IO=y
-CONFIG_SWAP_IO_SPACE=y
-# CONFIG_MIPS_AU1000 is not set
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_VTAG_ICACHE is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_LLDSCD is not set
-# CONFIG_CPU_HAS_WB is not set
-CONFIG_CPU_HAS_SYNC=y
-
-#
-# General setup
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_BUILD_ELF64 is not set
-CONFIG_NET=y
-# CONFIG_PCI is not set
-# CONFIG_ISA is not set
-# CONFIG_TC is not set
-# CONFIG_MCA is not set
-# CONFIG_SBUS is not set
-CONFIG_HOTPLUG=y
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_ELF_AOUT is not set
-# CONFIG_MIPS32_COMPAT is not set
-# CONFIG_MIPS32_O32 is not set
-# CONFIG_MIPS32_N32 is not set
-# CONFIG_BINFMT_ELF32 is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_OOM_KILLER is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd"
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_B1 is not set
-CONFIG_MTD_CFI_B2=y
-# CONFIG_MTD_CFI_B4 is not set
-# CONFIG_MTD_CFI_B8 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_CFI_SSTSTD is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_AMDSTD is not set
-# CONFIG_MTD_SHARP is not set
-# CONFIG_MTD_JEDEC is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_AR7=y
-CONFIG_MTD_AR7_DEFAULTS=y
-CONFIG_MTD_AR7_START=0x10000000
-CONFIG_MTD_AR7_LEN=0x400000
-CONFIG_MTD_AR7_BUSWIDTH=2
-# CONFIG_MTD_PB1000 is not set
-# CONFIG_MTD_PB1500 is not set
-# CONFIG_MTD_PB1100 is not set
-# CONFIG_MTD_BOSPORUS is not set
-# CONFIG_MTD_XXS1500 is not set
-# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
-# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
-# CONFIG_MTD_MIRAGE is not set
-# CONFIG_MTD_CSTM_MIPS_IXX is not set
-# CONFIG_MTD_OCELOT is not set
-# CONFIG_MTD_LASAT is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC1000 is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOCPROBE is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_CISS_MONITOR_THREAD is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_BLK_STATS is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_FILTER is not set
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_NAT=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_TOS=y
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-
-#
-#   IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_IRC=y
-CONFIG_IP_NF_CT_ACCT=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_CT_PROTO_GRE=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-CONFIG_IP_NF_MMS=m
-CONFIG_IP_NF_RTSP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_QUOTA=m
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_CONDITION=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_UNCLEAN=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_LAYER7_MAXDATALEN=2048
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_MIRROR=m
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_PROTO_GRE=m
-CONFIG_IP_NF_NAT_H323=m
-CONFIG_IP_NF_NAT_MMS=m
-CONFIG_IP_NF_NAT_RTSP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_IMQ=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-#   IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-
-#
-#   IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_CONDITION=m
-CONFIG_IP6_NF_MATCH_MAC=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_TARGET_IMQ=m
-# CONFIG_KHTTPD is not set
-
-#
-#    SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-CONFIG_ATM=m
-# CONFIG_ATM_CLIP is not set
-# CONFIG_ATM_LANE is not set
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_VLAN_8021Q=y
-
-#
-#  
-#
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-CONFIG_BRIDGE=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_CSZ=m
-CONFIG_NET_SCH_HFSC=m
-# CONFIG_NET_SCH_ATM is not set
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_IPSEC_NAT_TRAVERSAL=y
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-# CONFIG_PHONE_IXJ_PCMCIA is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI support
-#
-CONFIG_SCSI=m
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_SD_EXTRA_DEVS=5
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_DEBUG_QUEUES is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_MEGARAID2 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_DMA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NCR53C7xx is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SIM710 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_BOOT is not set
-# CONFIG_FUSION_ISENSE is not set
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LAN is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-CONFIG_TUN=m
-CONFIG_NET_RANDOM=y
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MIPS_AVALANCHE_CPMAC=m
-CONFIG_MIPS_CPMAC_INIT_BUF_MALLOC=y
-CONFIG_MIPS_CPMAC_PORTS=1
-CONFIG_AVALANCHE_CPMAC_AUTO=y
-# CONFIG_AVALANCHE_LOW_CPMAC is not set
-# CONFIG_AVALANCHE_HIGH_CPMAC is not set
-# CONFIG_SUNLANCE is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE_MPPC=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_STRIP is not set
-# CONFIG_WAVELAN is not set
-# CONFIG_ARLAN is not set
-# CONFIG_AIRONET4500 is not set
-# CONFIG_AIRONET4500_NONCS is not set
-# CONFIG_AIRONET4500_PROC is not set
-# CONFIG_HERMES is not set
-
-#
-# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_NET_WIRELESS is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-CONFIG_SHAPER=m
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_TCP is not set
-CONFIG_MIPS_SANGAM_ATM=m
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_AR7_LED=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=128
-CONFIG_AR7_VLYNQ=y
-CONFIG_VLYNQ_CLK_LOCAL=y
-CONFIG_AR7_VLYNQ_PORTS=2
-CONFIG_AR7_ADAM2=y
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPMI_PANIC_EVENT is not set
-# CONFIG_IPMI_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_KCS is not set
-# CONFIG_IPMI_WATCHDOG is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AR7_WDT=y
-CONFIG_SOFT_WATCHDOG=m 
-# CONFIG_SCx200 is not set
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-
-#
-# Direct Rendering Manager (XFree86 DRI support)
-#
-# CONFIG_DRM is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_QFMT_V2 is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-CONFIG_EXT3_FS=m
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-CONFIG_VFAT_FS=m
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_BBC_ARMLIB is not set
-# CONFIG_JFFS2_BBC_LZO is not set
-CONFIG_JFFS2_BBC_LZARI=y
-# CONFIG_JFFS2_BBC_LZHD is not set
-# CONFIG_JFFS2_BBC_LZSS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=m
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_TRACE is not set
-# CONFIG_XFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_SUNRPC=m
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SMB_NLS is not set
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# Support for USB gadgets
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-CONFIG_BLUEZ=m
-CONFIG_BLUEZ_L2CAP=m
-CONFIG_BLUEZ_SCO=m
-CONFIG_BLUEZ_RFCOMM=m
-CONFIG_BLUEZ_RFCOMM_TTY=y
-CONFIG_BLUEZ_BNEP=m
-CONFIG_BLUEZ_BNEP_MC_FILTER=y
-CONFIG_BLUEZ_BNEP_PROTO_FILTER=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BLUEZ_HCIUSB is not set
-CONFIG_BLUEZ_HCIUART=m
-CONFIG_BLUEZ_HCIUART_H4=y
-CONFIG_BLUEZ_HCIUART_BCSP=y
-CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y
-# CONFIG_BLUEZ_HCIBFUSB is not set
-# CONFIG_BLUEZ_HCIDTL1 is not set
-# CONFIG_BLUEZ_HCIBT3C is not set
-# CONFIG_BLUEZ_HCIBLUECARD is not set
-# CONFIG_BLUEZ_HCIBTUART is not set
-# CONFIG_BLUEZ_HCIVHCI is not set
-
-#
-# Kernel hacking
-#
-CONFIG_CROSSCOMPILE=y
-# CONFIG_RUNTIME_DEBUG is not set
-# CONFIG_KGDB is not set
-# CONFIG_GDB_CONSOLE is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_MIPS_UNCACHED is not set
-CONFIG_LOG_BUF_SHIFT=0
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_FW_LOADER is not set
diff --git a/openwrt/target/linux/ar7-2.4/patches/000-ar7_support.patch b/openwrt/target/linux/ar7-2.4/patches/000-ar7_support.patch
deleted file mode 100644
index 0c9c0d3028..0000000000
--- a/openwrt/target/linux/ar7-2.4/patches/000-ar7_support.patch
+++ /dev/null
@@ -1,9549 +0,0 @@
-diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
---- linux.old/arch/mips/Makefile	2005-10-21 16:43:16.316951500 +0200
-+++ linux.dev/arch/mips/Makefile	2005-11-10 01:10:45.775570250 +0100
-@@ -369,6 +369,16 @@
- endif
- 
- #
-+# Texas Instruments AR7
-+#
-+
-+ifdef CONFIG_AR7
-+LIBS		+= arch/mips/ar7/ar7.o
-+SUBDIRS		+= arch/mips/ar7
-+LOADADDR	+= 0x94020000
-+endif
-+
-+#
- # DECstation family
- #
- ifdef CONFIG_DECSTATION
-diff -urN linux.old/arch/mips/ar7/Makefile linux.dev/arch/mips/ar7/Makefile
---- linux.old/arch/mips/ar7/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/Makefile	2005-11-10 01:13:51.443173750 +0100
-@@ -0,0 +1,14 @@
-+.S.s:
-+	$(CPP) $(AFLAGS) $< -o $*.s
-+
-+.S.o:
-+	$(CC) $(AFLAGS) -c $< -o $*.o
-+
-+EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 -DLITTLE_ENDIAN -D_LINK_KSEG0_
-+O_TARGET := ar7.o
-+
-+obj-y := tnetd73xx_misc.o misc.o
-+export-objs := misc.o irq.o init.o
-+obj-y += setup.o irq.o int-handler.o reset.o init.o psp_env.o memory.o promlib.o cmdline.o
-+
-+include $(TOPDIR)/Rules.make
-diff -urN linux.old/arch/mips/ar7/cmdline.c linux.dev/arch/mips/ar7/cmdline.c
---- linux.old/arch/mips/ar7/cmdline.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/cmdline.c	2005-11-10 01:14:16.372731750 +0100
-@@ -0,0 +1,88 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
-+ */
-+#include <linux/init.h>
-+#include <linux/string.h>
-+
-+#include <asm/bootinfo.h>
-+
-+extern int prom_argc;
-+extern int *_prom_argv;
-+
-+/*
-+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
-+ * This macro take care of sign extension.
-+ */
-+#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
-+
-+char arcs_cmdline[CL_SIZE];
-+#ifdef CONFIG_CMDLINE_BOOL
-+char __initdata cfg_cmdline[] = CONFIG_CMDLINE;
-+#endif
-+
-+char * __init prom_getcmdline(void)
-+{
-+	return &(arcs_cmdline[0]);
-+}
-+
-+
-+void  __init prom_init_cmdline(void)
-+{
-+	char *cp, *end;
-+	int actr;
-+	char *env_cmdline = prom_getenv("kernel_args");
-+	size_t len;
-+
-+	actr = 1; /* Always ignore argv[0] */
-+
-+	cp = end = &(arcs_cmdline[0]);
-+	end += sizeof(arcs_cmdline);
-+
-+	if (env_cmdline) {
-+		len = strlen(env_cmdline);
-+		if (len > end - cp - 1)
-+			len = end - cp - 1;
-+		strncpy(cp, env_cmdline, len);
-+		cp += len;
-+		*cp++ = ' ';
-+	}
-+#ifdef CONFIG_CMDLINE_BOOL
-+	else {
-+		len = strlen(cfg_cmdline);
-+		if (len > end - cp - 1)
-+			len = end - cp - 1;
-+		strncpy(cp, cfg_cmdline, len);
-+		cp += len;
-+		*cp++ = ' ';
-+	}
-+#endif
-+
-+	while(actr < prom_argc) {
-+		len = strlen(prom_argv(actr));
-+		if (len > end - cp - 1)
-+			break;
-+		strncpy(cp, prom_argv(actr), len);
-+		cp += len;
-+		*cp++ = ' ';
-+		actr++;
-+	}
-+	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
-+		--cp;
-+	*cp = '\0';
-+}
-diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c
---- linux.old/arch/mips/ar7/init.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/init.c	2005-11-10 01:10:45.795571500 +0100
-@@ -0,0 +1,199 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-+ *
-+ *  This program is free software; you can distribute it and/or modify it
-+ *  under the terms of the GNU General Public License (Version 2) as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  This program is distributed in the hope it will be useful, but WITHOUT
-+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ *  for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License along
-+ *  with this program; if not, write to the Free Software Foundation, Inc.,
-+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * PROM library initialisation code.
-+ */
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+
-+#include <asm/io.h>
-+#include <asm/mips-boards/prom.h>
-+#include <asm/mips-boards/generic.h>
-+
-+#include <asm/ar7/adam2_env.h>
-+
-+int prom_argc;
-+int *_prom_argv, *_prom_envp;
-+
-+/* max # of Adam2 environment variables */
-+#define MAX_ENV_ENTRY 80
-+
-+static t_env_var local_envp[MAX_ENV_ENTRY];
-+static int env_type = 0;
-+int init_debug = 0;
-+
-+unsigned int max_env_entry;
-+
-+extern char *prom_psp_getenv(char *envname);
-+
-+static inline char *prom_adam2_getenv(char *envname)
-+{
-+	/*
-+	 * Return a pointer to the given environment variable.
-+	 * In 64-bit mode: we're using 64-bit pointers, but all pointers
-+	 * in the PROM structures are only 32-bit, so we need some
-+	 * workarounds, if we are running in 64-bit mode.
-+	 */
-+	int i;
-+	t_env_var *env = (t_env_var *) local_envp;
-+
-+	if (strcmp("bootloader", envname) == 0)
-+		return "Adam2";
-+
-+	i = strlen(envname);
-+	while (env->name) {
-+		if(strncmp(envname, env->name, i) == 0) {
-+			return(env->val);
-+		}
-+		env++;
-+	}
-+
-+	return NULL;
-+}
-+
-+/* XXX "bootloader" won't be returned.
-+ * Better make it an element of local_envp */
-+static inline t_env_var *
-+prom_adam2_iterenv(t_env_var *env) {
-+	if (!env)
-+	  env = local_envp;
-+	else
-+	  env++;
-+	if (env - local_envp > MAX_ENV_ENTRY || !env->name)
-+	  return 0;
-+	return env;
-+}
-+
-+char *prom_getenv(char *envname)
-+{
-+	if (env_type == 1)
-+		return prom_psp_getenv(envname);
-+	else
-+		return prom_adam2_getenv(envname);
-+}
-+
-+t_env_var *
-+prom_iterenv(t_env_var *last)
-+{
-+	if (env_type == 1)
-+	  return 0; /* not yet implemented */
-+	return prom_adam2_iterenv(last);
-+}
-+
-+static inline unsigned char str2hexnum(unsigned char c)
-+{
-+	if (c >= '0' && c <= '9')
-+		return c - '0';
-+	if (c >= 'a' && c <= 'f')
-+		return c - 'a' + 10;
-+	return 0; /* foo */
-+}
-+
-+static inline void str2eaddr(unsigned char *ea, unsigned char *str)
-+{
-+	int i;
-+
-+	for (i = 0; i < 6; i++) {
-+		unsigned char num;
-+
-+		if((*str == '.') || (*str == ':'))
-+			str++;
-+		num = str2hexnum(*str++) << 4;
-+		num |= (str2hexnum(*str++));
-+		ea[i] = num;
-+	}
-+}
-+
-+int get_ethernet_addr(char *ethernet_addr)
-+{
-+	char *ethaddr_str;
-+
-+	ethaddr_str = prom_getenv("ethaddr");
-+	if (!ethaddr_str) {
-+		printk("ethaddr not set in boot prom\n");
-+		return -1;
-+	}
-+	str2eaddr(ethernet_addr, ethaddr_str);
-+
-+	if (init_debug > 1) {
-+		int i;
-+		printk("get_ethernet_addr: ");
-+		for (i=0; i<5; i++)
-+			printk("%02x:", (unsigned char)*(ethernet_addr+i));
-+		printk("%02x\n", *(ethernet_addr+i));
-+	}
-+
-+	return 0;
-+}
-+
-+struct psbl_rec {
-+    unsigned int psbl_size;
-+    unsigned int env_base;
-+    unsigned int env_size;
-+    unsigned int ffs_base;
-+    unsigned int ffs_size;
-+};
-+
-+static const char psp_env_version[] = "TIENV0.8";
-+
-+int __init prom_init(int argc, char **argv, char **envp)
-+{
-+	int i;
-+
-+	t_env_var *env = (t_env_var *) envp;
-+	struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x94000300));
-+	void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
-+
-+	prom_argc = argc;
-+	_prom_argv = (int *)argv;
-+	_prom_envp = (int *)envp;
-+
-+	if(strcmp(psp_env, psp_env_version) == 0) {
-+ 		/* PSPBOOT */
-+
-+		env_type = 1;
-+		_prom_envp = psp_env;
-+		max_env_entry = (psbl->env_size / 16) - 1;
-+	} else {
-+		/* Copy what we need locally so we are not dependent on
-+		 * bootloader RAM.  In Adam2, the environment parameters
-+		 * are in flash but the table that references them is in
-+		 * RAM
-+		 */
-+
-+		for(i=0; i < MAX_ENV_ENTRY; i++, env++) {
-+			if (env->name) {
-+				local_envp[i].name = env->name;
-+				local_envp[i].val = env->val;
-+			} else {
-+				local_envp[i].name = NULL;
-+				local_envp[i].val = NULL;
-+			}
-+		}
-+	}
-+
-+	set_io_port_base(0);
-+
-+	prom_printf("\nLINUX started...\n");
-+	prom_init_cmdline();
-+	prom_meminit();
-+
-+	return 0;
-+}
-diff -urN linux.old/arch/mips/ar7/int-handler.S linux.dev/arch/mips/ar7/int-handler.S
---- linux.old/arch/mips/ar7/int-handler.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/int-handler.S	2005-11-10 01:12:43.938955000 +0100
-@@ -0,0 +1,63 @@
-+/*
-+ * Copyright 2004 PMC-Sierra Inc.
-+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
-+ * Adaption for AR7: Enrik Berkhan <enrik@akk.org>
-+ *
-+ * First-level interrupt dispatcher for the TI AR7
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+#define __ASSEMBLY__
-+#include <linux/config.h>
-+#include <asm/asm.h>
-+#include <asm/mipsregs.h>
-+#include <asm/addrspace.h>
-+#include <asm/regdef.h>
-+#include <asm/stackframe.h>
-+
-+/*
-+ * First level interrupt dispatcher for TI AR7 based boards
-+ */
-+
-+		.align	5
-+		NESTED(ar7IRQ, PT_SIZE, sp)
-+		SAVE_ALL
-+		CLI
-+		.set	at
-+
-+		mfc0	t0, CP0_CAUSE
-+		mfc0	t2, CP0_STATUS
-+
-+		and	t0, t2
-+
-+		andi	t1, t0, STATUSF_IP2	/* hw0 hardware interrupt */
-+		bnez	t1, ll_hw0_irq
-+
-+		andi	t1, t0, STATUSF_IP7	/* R4k CPU timer */
-+		bnez	t1, ll_timer_irq
-+
-+		.set	reorder
-+
-+		/* wrong alarm or masked ... */
-+		j	spurious_interrupt
-+		nop
-+		END(ar7IRQ)
-+
-+		.align	5
-+
-+ll_hw0_irq:
-+		li	a0, 2
-+		move	a1, sp
-+		jal	do_IRQ
-+		j	ret_from_irq
-+
-+ll_timer_irq:
-+		li	a0, 7
-+		move	a1, sp
-+		jal	do_IRQ
-+		j	ret_from_irq
-+
-+			
-diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c
---- linux.old/arch/mips/ar7/irq.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/irq.c	2005-11-10 01:12:43.938955000 +0100
-@@ -0,0 +1,427 @@
-+/*
-+ * Nitin Dhingra, iamnd@ti.com
-+ * Copyright (C) 2002 Texas Instruments, Inc.  All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ *  This program is free software; you can distribute it and/or modify it
-+ *  under the terms of the GNU General Public License (Version 2) as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  This program is distributed in the hope it will be useful, but WITHOUT
-+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ *  for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License along
-+ *  with this program; if not, write to the Free Software Foundation, Inc.,
-+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * Routines for generic manipulation of the interrupts found on the Texas
-+ * Instruments avalanche board
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/irq.h>
-+#include <asm/mipsregs.h>
-+#include <asm/ar7/ar7.h>
-+#include <asm/ar7/avalanche_intc.h>
-+
-+#define shutdown_avalanche_irq	disable_avalanche_irq
-+#define mask_and_ack_avalanche_irq   disable_avalanche_irq
-+
-+static unsigned int startup_avalanche_irq(unsigned int irq);
-+static void end_avalanche_irq(unsigned int irq);
-+void enable_avalanche_irq(unsigned int irq_nr);
-+void disable_avalanche_irq(unsigned int irq_nr);
-+void ar7_hw0_interrupt(int interrupt, void *dev, struct pt_regs *regs);
-+
-+static struct hw_interrupt_type avalanche_irq_type = {
-+	"AR7",
-+	startup_avalanche_irq,
-+	shutdown_avalanche_irq,
-+	enable_avalanche_irq,
-+	disable_avalanche_irq,
-+	mask_and_ack_avalanche_irq,
-+	end_avalanche_irq,
-+	NULL
-+};
-+
-+static int ar7_irq_base;
-+
-+static struct irqaction ar7_hw0_action = {
-+    ar7_hw0_interrupt, 0, 0, "AR7 on hw0", NULL, NULL
-+};
-+
-+struct avalanche_ictrl_regs         *avalanche_hw0_icregs;  /* Interrupt control regs (primary)   */
-+struct avalanche_exctrl_regs        *avalanche_hw0_ecregs;  /* Exception control regs (secondary) */
-+struct avalanche_ipace_regs         *avalanche_hw0_ipaceregs;
-+struct avalanche_channel_int_number *avalanche_hw0_chregs;  /* Channel control registers          */
-+
-+/*
-+   This remaps interrupts to exist on other channels than the default
-+   channels.  essentially we can use the line # as the index for this
-+   array
-+ */
-+
-+static unsigned long line_to_channel[AVINTNUM(AVALANCHE_INT_END_PRIMARY)];
-+unsigned long uni_secondary_interrupt = 0;
-+
-+static void end_avalanche_irq(unsigned int irq)
-+{
-+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-+		enable_avalanche_irq(irq);
-+}
-+
-+void disable_avalanche_irq(unsigned int irq_nr)
-+{
-+	unsigned long flags;
-+	unsigned long chan_nr=0;
-+
-+	save_and_cli(flags);
-+
-+	/* irq_nr represents the line number for the interrupt.  We must
-+	 *  disable the channel number associated with that line number.
-+	 */
-+
-+	if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2)
-+		chan_nr = AVINTNUM(irq_nr);                 /*CHECK THIS ALSO*/
-+	else
-+		chan_nr = line_to_channel[AVINTNUM(irq_nr)];/* WE NEED A LINE TO CHANNEL MAPPING FUNCTION HERE*/
-+
-+	/* disable the interrupt channel bit */
-+
-+	/* primary interrupt #'s 0-31 */
-+
-+	if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))
-+		avalanche_hw0_icregs->intecr1 = (1 << chan_nr);
-+
-+	/* primary interrupt #'s 32-39 */
-+
-+	else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) &&
-+			(chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)))
-+		avalanche_hw0_icregs->intecr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
-+
-+	else  /* secondary interrupt #'s 0-31 */
-+		avalanche_hw0_ecregs->exiecr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY)));
-+
-+	restore_flags(flags);
-+}
-+
-+void enable_avalanche_irq(unsigned int irq_nr)
-+{
-+	unsigned long flags;
-+	unsigned long chan_nr=0;
-+
-+	save_and_cli(flags);
-+
-+	/* irq_nr represents the line number for the interrupt.  We must
-+	 *  disable the channel number associated with that line number.
-+	 */
-+
-+	if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2)
-+		chan_nr = AVINTNUM(irq_nr);
-+	else
-+		chan_nr = line_to_channel[AVINTNUM(irq_nr)];
-+
-+	/* enable the interrupt channel  bit */
-+
-+	/* primary interrupt #'s 0-31 */
-+	if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))
-+		avalanche_hw0_icregs->intesr1 = (1 << chan_nr);
-+
-+	/* primary interrupt #'s 32 throuth 39 */
-+	else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) &&
-+			(chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)))
-+		avalanche_hw0_icregs->intesr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
-+
-+	else    /* secondary interrupt #'s 0-31 */
-+		avalanche_hw0_ecregs->exiesr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY)));
-+
-+	restore_flags(flags);
-+}
-+
-+static unsigned int startup_avalanche_irq(unsigned int irq)
-+{
-+	enable_avalanche_irq(irq);
-+	return 0; /* never anything pending */
-+}
-+
-+void __init ar7_irq_init(int base)
-+{
-+	int i;
-+
-+	avalanche_hw0_icregs = (struct avalanche_ictrl_regs *)AVALANCHE_ICTRL_REGS_BASE;
-+	avalanche_hw0_ecregs = (struct avalanche_exctrl_regs *)AVALANCHE_ECTRL_REGS_BASE;
-+	avalanche_hw0_ipaceregs = (struct avalanche_ipace_regs *)AVALANCHE_IPACE_REGS_BASE;
-+	avalanche_hw0_chregs = (struct avalanche_channel_int_number *)AVALANCHE_CHCTRL_REGS_BASE;
-+
-+	/*  Disable interrupts and clear pending
-+	 */
-+
-+	avalanche_hw0_icregs->intecr1 = 0xffffffff;    /* disable interrupts 0:31  */
-+	avalanche_hw0_icregs->intcr1 = 0xffffffff;     /* clear interrupts 0:31    */
-+	avalanche_hw0_icregs->intecr2 = 0xff;          /* disable interrupts 32:39 */
-+	avalanche_hw0_icregs->intcr2 = 0xff;           /* clear interrupts 32:39   */
-+	avalanche_hw0_ecregs->exiecr = 0xffffffff;     /* disable secondary interrupts 0:31 */
-+	avalanche_hw0_ecregs->excr = 0xffffffff;       /* clear secondary interrupts 0:31 */
-+
-+
-+	// avalanche_hw0_ipaceregs->ipacep = (2*get_avalanche_vbus_freq()/1000000)*4;
-+	/* hack for speeding up the pacing. */
-+	printk("the pacing pre-scalar has been set as 600.\n");
-+	avalanche_hw0_ipaceregs->ipacep = 600;
-+	/* Channel to line mapping, Line to Channel mapping */
-+
-+	for(i = 0; i < 40; i++)
-+		avalanche_int_set(i,i);
-+
-+	ar7_irq_base = base;
-+	for (i = base; i <= base+40; i++)
-+	{
-+		irq_desc[i].status	= IRQ_DISABLED;
-+		irq_desc[i].action	= 0;
-+		irq_desc[i].depth	= 1;
-+		irq_desc[i].handler	= &avalanche_irq_type;
-+	}
-+
-+	setup_irq(2, &ar7_hw0_action);
-+	set_c0_status(IE_IRQ0);
-+
-+	return;
-+}
-+
-+void ar7_hw0_interrupt(int interrupt, void *dev, struct pt_regs *regs)
-+{
-+	int irq;
-+	unsigned long int_line_number, status;
-+	int i, chan_nr = 0;
-+
-+	int_line_number = ((avalanche_hw0_icregs->pintir >> 16) & 0x3F);
-+	chan_nr = ((avalanche_hw0_icregs->pintir) & 0x3F);
-+
-+	if(chan_nr < 32) /* primary 0-31 */
-+	{
-+		if( chan_nr != uni_secondary_interrupt)
-+			avalanche_hw0_icregs->intcr1 = (1<<chan_nr);
-+
-+	}
-+
-+	if((chan_nr < 40) && (chan_nr > 31)) /* primary 32-39 */
-+	{
-+		avalanche_hw0_icregs->intcr2 = (1<<(chan_nr-32));
-+	}
-+
-+
-+	/* If the Priority Interrupt Index Register returns 40  then no
-+	 * interrupts are pending
-+	 */
-+
-+	if(chan_nr == 40)
-+		return;
-+
-+	if(chan_nr == uni_secondary_interrupt) /* secondary 0-31 */
-+	{
-+		status = avalanche_hw0_ecregs->exsr;
-+		for(i=0; i < 32; i++)
-+		{
-+			if (status & 1<<i)
-+			{
-+				/* clear secondary interrupt */
-+				avalanche_hw0_ecregs->excr = 1 << i;
-+				break;
-+			}
-+		}
-+		irq = i+40;
-+
-+		/* clear the universal secondary interrupt */
-+		avalanche_hw0_icregs->intcr1 = 1 << uni_secondary_interrupt;
-+
-+	}
-+	else
-+		irq = chan_nr;
-+
-+	do_IRQ(irq + ar7_irq_base, regs);
-+	return;
-+}
-+
-+void avalanche_int_set(int channel, int line)
-+{
-+	switch(channel)
-+	{
-+		case(0):
-+			avalanche_hw0_chregs->cintnr0 =  line;
-+			break;
-+		case(1):
-+			avalanche_hw0_chregs->cintnr1 =  line;
-+			break;
-+		case(2):
-+			avalanche_hw0_chregs->cintnr2 =  line;
-+			break;
-+		case(3):
-+			avalanche_hw0_chregs->cintnr3 =  line;
-+			break;
-+		case(4):
-+			avalanche_hw0_chregs->cintnr4 =  line;
-+			break;
-+		case(5):
-+			avalanche_hw0_chregs->cintnr5 =  line;
-+			break;
-+		case(6):
-+			avalanche_hw0_chregs->cintnr6 =  line;
-+			break;
-+		case(7):
-+			avalanche_hw0_chregs->cintnr7 =  line;
-+			break;
-+		case(8):
-+			avalanche_hw0_chregs->cintnr8 =  line;
-+			break;
-+		case(9):
-+			avalanche_hw0_chregs->cintnr9 =  line;
-+			break;
-+		case(10):
-+			avalanche_hw0_chregs->cintnr10 = line;
-+			break;
-+		case(11):
-+			avalanche_hw0_chregs->cintnr11 = line;
-+			break;
-+		case(12):
-+			avalanche_hw0_chregs->cintnr12 = line;
-+			break;
-+		case(13):
-+			avalanche_hw0_chregs->cintnr13 = line;
-+			break;
-+		case(14):
-+			avalanche_hw0_chregs->cintnr14 = line;
-+			break;
-+		case(15):
-+			avalanche_hw0_chregs->cintnr15 = line;
-+			break;
-+		case(16):
-+			avalanche_hw0_chregs->cintnr16 = line;
-+			break;
-+		case(17):
-+			avalanche_hw0_chregs->cintnr17 = line;
-+			break;
-+		case(18):
-+			avalanche_hw0_chregs->cintnr18 = line;
-+			break;
-+		case(19):
-+			avalanche_hw0_chregs->cintnr19 = line;
-+			break;
-+		case(20):
-+			avalanche_hw0_chregs->cintnr20 = line;
-+			break;
-+		case(21):
-+			avalanche_hw0_chregs->cintnr21 = line;
-+			break;
-+		case(22):
-+			avalanche_hw0_chregs->cintnr22 = line;
-+			break;
-+		case(23):
-+			avalanche_hw0_chregs->cintnr23 = line;
-+			break;
-+		case(24):
-+			avalanche_hw0_chregs->cintnr24 = line;
-+			break;
-+		case(25):
-+			avalanche_hw0_chregs->cintnr25 = line;
-+			break;
-+		case(26):
-+			avalanche_hw0_chregs->cintnr26 = line;
-+			break;
-+		case(27):
-+			avalanche_hw0_chregs->cintnr27 = line;
-+			break;
-+		case(28):
-+			avalanche_hw0_chregs->cintnr28 = line;
-+			break;
-+		case(29):
-+			avalanche_hw0_chregs->cintnr29 = line;
-+			break;
-+		case(30):
-+			avalanche_hw0_chregs->cintnr30 = line;
-+			break;
-+		case(31):
-+			avalanche_hw0_chregs->cintnr31 = line;
-+			break;
-+		case(32):
-+			avalanche_hw0_chregs->cintnr32 = line;
-+			break;
-+		case(33):
-+			avalanche_hw0_chregs->cintnr33 = line;
-+			break;
-+		case(34):
-+			avalanche_hw0_chregs->cintnr34 = line;
-+			break;
-+		case(35):
-+			avalanche_hw0_chregs->cintnr35 = line;
-+			break;
-+		case(36):
-+			avalanche_hw0_chregs->cintnr36 = line;
-+			break;
-+		case(37):
-+			avalanche_hw0_chregs->cintnr37 = line;
-+			break;
-+		case(38):
-+			avalanche_hw0_chregs->cintnr38 = line;
-+			break;
-+		case(39):
-+			avalanche_hw0_chregs->cintnr39 = line;
-+			break;
-+		default:
-+			printk("Error: Unknown Avalanche interrupt channel\n");
-+	}
-+
-+	line_to_channel[line] = channel; /* Suraj check */
-+
-+	if (channel == UNIFIED_SECONDARY_INTERRUPT)
-+		uni_secondary_interrupt = line;
-+
-+}
-+
-+
-+#define AVALANCHE_MAX_PACING_BLK   3
-+#define AVALANCHE_PACING_LOW_VAL   2
-+#define AVALANCHE_PACING_HIGH_VAL 63
-+
-+int avalanche_request_pacing(int irq_nr, unsigned int blk_num,
-+                            unsigned int pace_value)
-+{
-+    unsigned int  blk_offset;
-+    unsigned long flags;
-+
-+    if(irq_nr < MIPS_EXCEPTION_OFFSET &&
-+       irq_nr >= AVALANCHE_INT_END_PRIMARY)
-+        return (0);
-+
-+    if(blk_num > AVALANCHE_MAX_PACING_BLK)
-+        return(-1);
-+
-+    if(pace_value > AVALANCHE_PACING_HIGH_VAL &&
-+       pace_value < AVALANCHE_PACING_LOW_VAL)
-+       return(-1);
-+
-+    blk_offset = blk_num*8;
-+
-+    save_and_cli(flags);
-+
-+    /* disable the interrupt pacing, if enabled previously */
-+    avalanche_hw0_ipaceregs->ipacemax &= ~(0xff << blk_offset);
-+
-+    /* clear the pacing map */
-+    avalanche_hw0_ipaceregs->ipacemap &= ~(0xff << blk_offset);
-+
-+    /* setup the new values */
-+    avalanche_hw0_ipaceregs->ipacemap |= ((AVINTNUM(irq_nr))   << blk_offset);
-+    avalanche_hw0_ipaceregs->ipacemax |= ((0x80 | pace_value)  << blk_offset);
-+
-+    restore_flags(flags);
-+
-+    return(0);
-+}
-diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c
---- linux.old/arch/mips/ar7/memory.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/memory.c	2005-11-10 01:14:16.372731750 +0100
-@@ -0,0 +1,103 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ *  This program is free software; you can distribute it and/or modify it
-+ *  under the terms of the GNU General Public License (Version 2) as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  This program is distributed in the hope it will be useful, but WITHOUT
-+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ *  for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License along
-+ *  with this program; if not, write to the Free Software Foundation, Inc.,
-+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/bootinfo.h>
-+#include <asm/page.h>
-+#include <asm/mips-boards/prom.h>
-+
-+extern char _ftext;
-+extern int preserve_adam2;
-+
-+void __init prom_meminit(void)
-+{
-+	char *memsize_str;
-+	unsigned long memsize, adam2size;
-+
-+	/* assume block before kernel is used by bootloader */
-+	adam2size = __pa(&_ftext) - PHYS_OFFSET;
-+
-+	memsize_str = prom_getenv("memsize");
-+	if (!memsize_str) {
-+		memsize = 0x02000000;
-+	} else {
-+		memsize = simple_strtol(memsize_str, NULL, 0);
-+	}
-+
-+#if 0
-+	add_memory_region(0x00000000, PHYS_OFFSET, BOOT_MEM_RESERVED);
-+#endif
-+	add_memory_region(PHYS_OFFSET, adam2size, BOOT_MEM_ROM_DATA);
-+	add_memory_region(PHYS_OFFSET+adam2size, memsize-adam2size,
-+			  BOOT_MEM_RAM);
-+}
-+
-+unsigned long __init prom_free_prom_memory (void)
-+{
-+	int i;
-+	unsigned long freed = 0;
-+	unsigned long addr;
-+
-+	if (preserve_adam2) {
-+		char *firstfree_str = prom_getenv("firstfreeaddress");
-+		unsigned long firstfree = 0;
-+
-+		if (firstfree_str)
-+			firstfree = simple_strtol(firstfree_str, NULL, 0);
-+
-+		if (firstfree && firstfree < (unsigned long)&_ftext) {
-+			printk("Preserving ADAM2 memory.\n");
-+		} else if (firstfree) {
-+			printk("Can't preserve ADAM2 memory, "
-+			       "firstfreeaddress = %08lx.\n", firstfree);
-+			preserve_adam2 = 0;
-+		} else {
-+			printk("Can't preserve ADAM2 memory, "
-+			       "firstfreeaddress unknown!\n");
-+			preserve_adam2 = 0;
-+		}
-+	}
-+
-+	if (!preserve_adam2) {
-+		for (i = 0; i < boot_mem_map.nr_map; i++) {
-+			if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
-+				continue;
-+
-+			addr = boot_mem_map.map[i].addr;
-+			while (addr < boot_mem_map.map[i].addr
-+				+ boot_mem_map.map[i].size) {
-+				ClearPageReserved(virt_to_page(__va(addr)));
-+				set_page_count(virt_to_page(__va(addr)), 1);
-+				free_page((unsigned long)__va(addr));
-+				addr += PAGE_SIZE;
-+				freed += PAGE_SIZE;
-+			}
-+		}
-+		printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
-+	}
-+	return freed >> PAGE_SHIFT;
-+}
-diff -urN linux.old/arch/mips/ar7/misc.c linux.dev/arch/mips/ar7/misc.c
---- linux.old/arch/mips/ar7/misc.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/misc.c	2005-11-10 01:12:43.946955500 +0100
-@@ -0,0 +1,322 @@
-+#include <asm/ar7/sangam.h>
-+#include <asm/ar7/avalanche_misc.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+
-+#define TRUE 1
-+
-+static unsigned int avalanche_vbus_freq;
-+
-+REMOTE_VLYNQ_DEV_RESET_CTRL_FN p_remote_vlynq_dev_reset_ctrl = NULL;
-+
-+/*****************************************************************************
-+ * Reset Control Module.
-+ *****************************************************************************/
-+void avalanche_reset_ctrl(unsigned int module_reset_bit, 
-+                          AVALANCHE_RESET_CTRL_T reset_ctrl)
-+{
-+    volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
-+   
-+    if(module_reset_bit >= 32 && module_reset_bit < 64)
-+        return;
-+
-+    if(module_reset_bit >= 64)
-+    {
-+        if(p_remote_vlynq_dev_reset_ctrl) {
-+            p_remote_vlynq_dev_reset_ctrl(module_reset_bit - 64, reset_ctrl);
-+	    return;
-+	}
-+        else
-+            return;
-+    }
-+    
-+    if(reset_ctrl == OUT_OF_RESET)
-+        *reset_reg |= 1 << module_reset_bit;
-+    else
-+        *reset_reg &= ~(1 << module_reset_bit);
-+    return;
-+}
-+
-+AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(unsigned int module_reset_bit)
-+{
-+    volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
-+
-+    return (((*reset_reg) & (1 << module_reset_bit)) ? OUT_OF_RESET : IN_RESET );
-+}
-+
-+void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode)
-+{
-+    volatile unsigned int *sw_reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_SWRCR;
-+    *sw_reset_reg =  mode;
-+}
-+
-+#define AVALANCHE_RST_CTRL_RSR_MASK 0x3
-+
-+AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status()
-+{
-+    volatile unsigned int *sys_reset_status = (unsigned int*) AVALANCHE_RST_CTRL_RSR;
-+
-+    return ( (AVALANCHE_SYS_RESET_STATUS_T) (*sys_reset_status & AVALANCHE_RST_CTRL_RSR_MASK) );
-+}
-+
-+
-+/*****************************************************************************
-+ * Power Control Module
-+ *****************************************************************************/
-+#define AVALANCHE_GLOBAL_POWER_DOWN_MASK    0x3FFFFFFF      /* bit 31, 30 masked */
-+#define AVALANCHE_GLOBAL_POWER_DOWN_BIT     30              /* shift to bit 30, 31 */
-+
-+
-+void avalanche_power_ctrl(unsigned int module_power_bit, AVALANCHE_POWER_CTRL_T power_ctrl)
-+{
-+    volatile unsigned int *power_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
-+
-+    if (power_ctrl == POWER_CTRL_POWER_DOWN)
-+        /* power down the module */
-+        *power_reg |= (1 << module_power_bit);
-+    else
-+        /* power on the module */
-+        *power_reg &= (~(1 << module_power_bit));
-+}
-+
-+AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int module_power_bit)
-+{
-+    volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
-+
-+    return (((*power_status_reg) & (1 << module_power_bit)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP);
-+}
-+
-+void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode)
-+{
-+    volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
-+
-+    *power_status_reg &= AVALANCHE_GLOBAL_POWER_DOWN_MASK;
-+    *power_status_reg |= ( power_mode << AVALANCHE_GLOBAL_POWER_DOWN_BIT);
-+}
-+
-+AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void)
-+{
-+    volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
-+
-+    return((AVALANCHE_SYS_POWER_MODE_T) (((*power_status_reg) & (~AVALANCHE_GLOBAL_POWER_DOWN_MASK)) 
-+                                           >> AVALANCHE_GLOBAL_POWER_DOWN_BIT));
-+}
-+
-+/*****************************************************************************
-+ * GPIO  Control
-+ *****************************************************************************/
-+
-+/****************************************************************************
-+ * FUNCTION: avalanche_gpio_init
-+ ***************************************************************************/
-+void avalanche_gpio_init(void)
-+{
-+    spinlock_t closeLock;
-+    unsigned int closeFlag;
-+    volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
-+    spin_lock_irqsave(&closeLock, closeFlag);
-+    *reset_reg |= (1 << AVALANCHE_GPIO_RESET_BIT);
-+    spin_unlock_irqrestore(&closeLock, closeFlag);  
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: avalanche_gpio_ctrl
-+ ***************************************************************************/
-+int avalanche_gpio_ctrl(unsigned int gpio_pin,
-+                        AVALANCHE_GPIO_PIN_MODE_T pin_mode,
-+                        AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction)
-+{
-+    spinlock_t closeLock;
-+    unsigned int closeFlag;
-+    volatile unsigned int *gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_ENBL;
-+
-+    if(gpio_pin >= 32)
-+        return(-1);
-+
-+    spin_lock_irqsave(&closeLock, closeFlag);
-+
-+    if(pin_mode == GPIO_PIN)
-+    {
-+        *gpio_ctrl |= (1 << gpio_pin);
-+
-+	gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_DIR;
-+        
-+        if(pin_direction == GPIO_INPUT_PIN)
-+            *gpio_ctrl |=  (1 << gpio_pin);
-+        else
-+            *gpio_ctrl &= ~(1 << gpio_pin);
-+    }
-+    else /* FUNCTIONAL PIN */
-+    {
-+        *gpio_ctrl &= ~(1 << gpio_pin);
-+    }
-+  
-+    spin_unlock_irqrestore(&closeLock, closeFlag);  
-+
-+    return (0);
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: avalanche_gpio_out
-+ ***************************************************************************/
-+int avalanche_gpio_out_bit(unsigned int gpio_pin, int value)
-+{
-+    spinlock_t closeLock;
-+    unsigned int closeFlag;
-+    volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT;
-+ 
-+    if(gpio_pin >= 32)
-+        return(-1);
-+    
-+    spin_lock_irqsave(&closeLock, closeFlag);
-+    if(value == TRUE)
-+        *gpio_out |= 1 << gpio_pin;
-+    else
-+	*gpio_out &= ~(1 << gpio_pin);
-+    spin_unlock_irqrestore(&closeLock, closeFlag);
-+
-+    return(0);
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: avalanche_gpio_in
-+ ***************************************************************************/
-+int avalanche_gpio_in_bit(unsigned int gpio_pin)
-+{
-+    spinlock_t closeLock;
-+    unsigned int closeFlag;
-+    volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN;
-+    int ret_val = 0;
-+    
-+    if(gpio_pin >= 32)
-+        return(-1);
-+
-+    spin_lock_irqsave(&closeLock, closeFlag); 
-+    ret_val = ((*gpio_in) & (1 << gpio_pin));
-+    spin_unlock_irqrestore(&closeLock, closeFlag);
-+ 
-+    return (ret_val);
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: avalanche_gpio_out_val
-+ ***************************************************************************/
-+int avalanche_gpio_out_value(unsigned int out_val, unsigned int out_mask, 
-+                           unsigned int reg_index)
-+{
-+    spinlock_t closeLock;
-+    unsigned int closeFlag;
-+    volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT;
-+
-+    if(reg_index > 0)
-+        return(-1);
-+
-+    spin_lock_irqsave(&closeLock, closeFlag);
-+    *gpio_out &= ~out_mask;
-+    *gpio_out |= out_val;
-+    spin_unlock_irqrestore(&closeLock, closeFlag);
-+
-+    return(0);
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: avalanche_gpio_in_value
-+ ***************************************************************************/
-+int avalanche_gpio_in_value(unsigned int* in_val, unsigned int reg_index)
-+{
-+    spinlock_t closeLock;
-+    unsigned int closeFlag;
-+    volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN;
-+ 
-+    if(reg_index > 0)
-+        return(-1);
-+
-+    spin_lock_irqsave(&closeLock, closeFlag);
-+    *in_val = *gpio_in;
-+    spin_unlock_irqrestore(&closeLock, closeFlag);
-+
-+    return (0);
-+}
-+
-+/***********************************************************************
-+ *
-+ *    Wakeup Control Module for TNETV1050 Communication Processor
-+ *
-+ ***********************************************************************/
-+
-+#define AVALANCHE_WAKEUP_POLARITY_BIT   16
-+
-+void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int,
-+                           AVALANCHE_WAKEUP_CTRL_T      wakeup_ctrl,
-+                           AVALANCHE_WAKEUP_POLARITY_T  wakeup_polarity)
-+{
-+    volatile unsigned int *wakeup_status_reg = (unsigned int*) AVALANCHE_WAKEUP_CTRL_WKCR;
-+
-+    /* enable/disable */
-+    if (wakeup_ctrl == WAKEUP_ENABLED)
-+        /* enable wakeup */
-+        *wakeup_status_reg |= wakeup_int;
-+    else
-+        /* disable wakeup */
-+        *wakeup_status_reg &= (~wakeup_int);
-+
-+    /* set polarity */
-+    if (wakeup_polarity == WAKEUP_ACTIVE_LOW)
-+        *wakeup_status_reg |=  (wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT);
-+    else
-+        *wakeup_status_reg &= ~(wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT);
-+}
-+
-+void avalanche_set_vbus_freq(unsigned int new_vbus_freq)
-+{
-+    avalanche_vbus_freq = new_vbus_freq;
-+}
-+
-+unsigned int avalanche_get_vbus_freq()
-+{
-+    return(avalanche_vbus_freq);
-+}
-+
-+unsigned int avalanche_get_chip_version_info()
-+{
-+    return(*(volatile unsigned int*)AVALANCHE_CVR);
-+}
-+
-+SET_MDIX_ON_CHIP_FN_T p_set_mdix_on_chip_fn = NULL;
-+
-+int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation)
-+{
-+    if(p_set_mdix_on_chip_fn)
-+        return (p_set_mdix_on_chip_fn(base_addr, operation));
-+    else
-+        return(-1);
-+}
-+
-+unsigned int avalanche_is_mdix_on_chip(void)
-+{
-+    return(p_set_mdix_on_chip_fn ? 1:0);
-+}
-+
-+EXPORT_SYMBOL(avalanche_reset_ctrl);
-+EXPORT_SYMBOL(avalanche_get_reset_status);
-+EXPORT_SYMBOL(avalanche_sys_reset);
-+EXPORT_SYMBOL(avalanche_get_sys_last_reset_status);
-+EXPORT_SYMBOL(avalanche_power_ctrl);
-+EXPORT_SYMBOL(avalanche_get_power_status);
-+EXPORT_SYMBOL(avalanche_set_global_power_mode);
-+EXPORT_SYMBOL(avalanche_get_global_power_mode);
-+EXPORT_SYMBOL(avalanche_set_mdix_on_chip);
-+EXPORT_SYMBOL(avalanche_is_mdix_on_chip);
-+
-+EXPORT_SYMBOL(avalanche_gpio_init);
-+EXPORT_SYMBOL(avalanche_gpio_ctrl);
-+EXPORT_SYMBOL(avalanche_gpio_out_bit);
-+EXPORT_SYMBOL(avalanche_gpio_in_bit);
-+EXPORT_SYMBOL(avalanche_gpio_out_value);
-+EXPORT_SYMBOL(avalanche_gpio_in_value);
-+
-+EXPORT_SYMBOL(avalanche_set_vbus_freq);
-+EXPORT_SYMBOL(avalanche_get_vbus_freq);
-+
-+EXPORT_SYMBOL(avalanche_get_chip_version_info);
-+
-diff -urN linux.old/arch/mips/ar7/platform.h linux.dev/arch/mips/ar7/platform.h
---- linux.old/arch/mips/ar7/platform.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/platform.h	2005-11-10 01:10:45.799571750 +0100
-@@ -0,0 +1,65 @@
-+#ifndef _PLATFORM_H_
-+#define _PLATFORM_H_
-+
-+#include <linux/config.h>
-+
-+
-+/* Important: The definition of ENV_SPACE_SIZE should match with that in
-+ * PSPBoot. (/psp_boot/inc/psbl/env.h)
-+ */
-+#ifdef CONFIG_MIPS_AVALANCHE_TICFG
-+#define ENV_SPACE_SIZE      (10 * 1024)
-+#endif
-+
-+#ifdef CONFIG_MIPS_TNETV1050SDB
-+#define TNETV1050SDB
-+#define DUAL_FLASH
-+#endif
-+
-+#ifdef CONFIG_MIPS_AR7DB
-+#define TNETD73XX_BOARD
-+#define AR7DB
-+#endif
-+
-+#ifdef CONFIG_MIPS_AR7RD
-+#define TNETD73XX_BOARD
-+#define AR7RD
-+#endif
-+
-+#ifdef CONFIG_AR7WRD
-+#define TNETD73XX_BOARD
-+#define AR7WRD
-+#endif
-+
-+#ifdef CONFIG_MIPS_AR7VWI
-+#define TNETD73XX_BOARD
-+#define AR7VWi
-+#endif
-+
-+/* Merging from the DEV_DSL-PSPL4.3.2.7_Patch release. */
-+#ifdef CONFIG_MIPS_AR7VW
-+#define TNETD73XX_BOARD
-+#define AR7WRD
-+#endif
-+
-+#ifdef CONFIG_MIPS_AR7WI
-+#define TNETD73XX_BOARD
-+#define AR7Wi
-+#endif
-+
-+#ifdef CONFIG_MIPS_AR7V
-+#define TNETD73XX_BOARD
-+#define AR7V
-+#endif
-+
-+#ifdef CONFIG_MIPS_AR7V
-+#define TNETD73XX_BOARD
-+#define AR7V
-+#endif
-+
-+#ifdef CONFIG_MIPS_WA1130
-+#define AVALANCHE
-+#define WLAN
-+#endif
-+
-+#endif
-diff -urN linux.old/arch/mips/ar7/promlib.c linux.dev/arch/mips/ar7/promlib.c
---- linux.old/arch/mips/ar7/promlib.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/promlib.c	2005-11-10 01:14:16.372731750 +0100
-@@ -0,0 +1,48 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-+ *
-+ *  This program is free software; you can distribute it and/or modify it
-+ *  under the terms of the GNU General Public License (Version 2) as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  This program is distributed in the hope it will be useful, but WITHOUT
-+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ *  for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License along
-+ *  with this program; if not, write to the Free Software Foundation, Inc.,
-+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * Putting things on the screen/serial line using Adam2 facilities.
-+ */
-+
-+#include <linux/types.h>
-+#include <asm/addrspace.h>
-+
-+#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
-+#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR \
-+          (AVALANCHE_YAMON_FUNCTION_BASE + 1 * 0x4)
-+#define AVALANCHE_YAMON_PROM_EXIT \
-+          (AVALANCHE_YAMON_FUNCTION_BASE + 8 * 0x4)
-+
-+void prom_putchar(char c)
-+{
-+ 	static char buf[1];
-+	void (*prom_print_str)(unsigned int dummy, char *s, int len) =
-+	  (void *)(*(uint32_t *)AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR);
-+
-+	buf[0] = c;
-+	prom_print_str(1, buf, 1);
-+	return;
-+}
-+
-+void adam2_exit(int retval)
-+{
-+	void (*yamon_exit)(int retval) =
-+	  (void *)(*(uint32_t *)AVALANCHE_YAMON_PROM_EXIT);
-+
-+	yamon_exit(retval);
-+	return;
-+}
-diff -urN linux.old/arch/mips/ar7/psp_env.c linux.dev/arch/mips/ar7/psp_env.c
---- linux.old/arch/mips/ar7/psp_env.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/psp_env.c	2005-11-10 01:10:45.799571750 +0100
-@@ -0,0 +1,350 @@
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <asm/io.h>
-+
-+#include "platform.h"
-+
-+#define ENV_CELL_SIZE           16
-+
-+/* control field decode */
-+#define ENV_GARBAGE_BIT                 0x01    /* Env is garbage if this bit is off */
-+#define ENV_DYNAMIC_BIT                 0x02    /* Env is dynamic if this bit is off */
-+
-+#define ENV_CTRL_MASK                   0x03
-+#define ENV_PREFINED                    (ENV_GARBAGE_BIT | ENV_DYNAMIC_BIT)
-+#define ENV_DYNAMIC                     (ENV_GARBAGE_BIT)
-+
-+struct env_variable {
-+    unsigned char   varNum;
-+    unsigned char   ctrl;
-+    unsigned short  chksum;
-+    unsigned char   numCells;
-+    unsigned char   data[ENV_CELL_SIZE - 5];    /* The data section starts
-+                                                 * here, continues for
-+                                                 * numCells.
-+                                                 */
-+};
-+
-+extern unsigned int max_env_entry;
-+
-+/* Internal macros */
-+#define get_next_block(var)    ((struct env_variable *)( (char*)(var) + (var)->numCells * ENV_CELL_SIZE))
-+
-+typedef enum ENV_VARS {
-+        env_vars_start = 0,
-+        CPUFREQ,
-+        MEMSZ,
-+        FLASHSZ,
-+        MODETTY0,
-+        MODETTY1,
-+        PROMPT,
-+        BOOTCFG,
-+        HWA_0,
-+#if !defined (AVALANCHE) || defined(TNETC401B)
-+        HWA_1,
-+#endif
-+#if !defined(TNETV1020_BOARD)
-+        HWA_RNDIS,
-+#endif
-+#if defined (TNETD73XX_BOARD)
-+        HWA_3,
-+#endif
-+        IPA,
-+        IPA_SVR,
-+        BLINE_MAC0,
-+#if !defined (AVALANCHE) || defined(TNETC401B)
-+        BLINE_MAC1,
-+#endif
-+#if !defined(TNETV1020_BOARD)
-+        BLINE_RNDIS,
-+#endif
-+#if defined (TNETD73XX_BOARD)
-+        BLINE_ATM,
-+#endif
-+#if !defined(TNETV1020_BOARD)
-+        USB_PID,
-+        USB_VID,
-+        USB_EPPOLLI,
-+#endif
-+        IPA_GATEWAY,
-+        SUBNET_MASK,
-+#if defined (TNETV1050_BOARD)
-+	BLINE_ESWITCH,
-+#endif
-+#if !defined(TNETV1020_BOARD)
-+	USB_SERIAL,
-+	HWA_HRNDIS,      /* Host (PC) side RNDIS address */
-+#endif
-+	REMOTE_USER,
-+	REMOTE_PASS,
-+	REMOTE_DIR,
-+	SYSFREQ,
-+	LINK_TIMEOUT,
-+#ifndef AVALANCHE     /* Avalanche boards use only one mac port */
-+	MAC_PORT,
-+#endif
-+	PATH,
-+	HOSTNAME,
-+#ifdef WLAN
-+	HW_REV_MAJOR,
-+	HW_REV_MINOR,
-+	HW_PATCH,
-+	SW_PATCH,
-+	SERIAL_NUMBER,
-+#endif
-+	TFTPCFG,
-+#if defined (TNETV1050_BOARD)
-+	HWA_ESWITCH,
-+#endif
-+        /*
-+         * Add new env variables here.
-+         * NOTE: New environment variables should always be placed at the end, ie
-+         *       just before env_vars_end.
-+         */
-+
-+        env_vars_end
-+} ENV_VARS;
-+
-+
-+struct env_description {
-+        ENV_VARS   idx;
-+        char      *nm;
-+	char      *alias;
-+};
-+
-+#define ENVSTR(x)         #x
-+#define _ENV_ENTRY(x)     {.idx = x, .nm = ENVSTR(x), .alias = NULL}
-+
-+struct env_description env_ns[] = {
-+        _ENV_ENTRY(env_vars_start), /* start. */
-+        _ENV_ENTRY(CPUFREQ),
-+        _ENV_ENTRY(MEMSZ),
-+        _ENV_ENTRY(FLASHSZ),
-+        _ENV_ENTRY(MODETTY0),
-+        _ENV_ENTRY(MODETTY1),
-+        _ENV_ENTRY(PROMPT),
-+        _ENV_ENTRY(BOOTCFG),
-+        _ENV_ENTRY(HWA_0),
-+#if !defined (AVALANCHE) || defined(TNETC401B)
-+        _ENV_ENTRY(HWA_1),
-+#endif
-+#if !defined(TNETV1020_BOARD)
-+        _ENV_ENTRY(HWA_RNDIS),
-+#endif
-+#if defined (TNETD73XX_BOARD)
-+        _ENV_ENTRY(HWA_3),
-+#endif
-+        _ENV_ENTRY(IPA),
-+        _ENV_ENTRY(IPA_SVR),
-+        _ENV_ENTRY(IPA_GATEWAY),
-+        _ENV_ENTRY(SUBNET_MASK),
-+        _ENV_ENTRY(BLINE_MAC0),
-+#if !defined (AVALANCHE) || defined(TNETC401B)
-+        _ENV_ENTRY(BLINE_MAC1),
-+#endif
-+#if !defined(TNETV1020_BOARD)
-+        _ENV_ENTRY(BLINE_RNDIS),
-+#endif
-+#if defined (TNETD73XX_BOARD)
-+        _ENV_ENTRY(BLINE_ATM),
-+#endif
-+#if !defined(TNETV1020_BOARD)
-+        _ENV_ENTRY(USB_PID),
-+        _ENV_ENTRY(USB_VID),
-+        _ENV_ENTRY(USB_EPPOLLI),
-+#endif
-+#if defined (TNETV1050_BOARD)
-+        _ENV_ENTRY(BLINE_ESWITCH),
-+#endif
-+#if !defined(TNETV1020_BOARD)
-+        _ENV_ENTRY(USB_SERIAL),
-+        _ENV_ENTRY(HWA_HRNDIS),
-+#endif
-+	_ENV_ENTRY(REMOTE_USER),
-+	_ENV_ENTRY(REMOTE_PASS),
-+	_ENV_ENTRY(REMOTE_DIR),
-+	_ENV_ENTRY(SYSFREQ),
-+	_ENV_ENTRY(LINK_TIMEOUT),
-+#ifndef AVALANCHE       /* Avalanche boards use only one mac port */
-+	_ENV_ENTRY(MAC_PORT),
-+#endif
-+	_ENV_ENTRY(PATH),
-+	_ENV_ENTRY(HOSTNAME),
-+#ifdef WLAN
-+	_ENV_ENTRY(HW_REV_MAJOR),
-+	_ENV_ENTRY(HW_REV_MINOR),
-+	_ENV_ENTRY(HW_PATCH),
-+	_ENV_ENTRY(SW_PATCH),
-+	_ENV_ENTRY(SERIAL_NUMBER),
-+#endif
-+	_ENV_ENTRY(TFTPCFG),
-+#if defined (TNETV1050_BOARD)
-+	_ENV_ENTRY(HWA_ESWITCH),
-+#endif
-+        /*
-+         * Add new entries below this.
-+         */
-+	/* Adam2 environment name alias. */
-+	{ .idx = IPA,      .nm = "my_ipaddress" },
-+	{ .idx = CPUFREQ,  .nm = "cpufrequency" },
-+	{ .idx = SYSFREQ,  .nm = "sysfrequency" },
-+	{ .idx = HWA_0,    .nm = "maca" },
-+#ifndef AVALANCHE
-+	{ .idx = HWA_1,    .nm = "macb" },
-+#endif
-+        { .idx = MODETTY0, .nm = "modetty0" },
-+        { .idx = MODETTY1, .nm = "modetty1" },
-+	{ .idx = MEMSZ,    .nm = "memsize" },
-+
-+        _ENV_ENTRY(env_vars_end) /* delimiter. */
-+};
-+
-+static inline int var_to_idx(const char* var)
-+{
-+	int ii;
-+
-+	/* go over the list of pre-defined environment variables */
-+        for (ii = env_vars_start; env_ns[ii].idx != env_vars_end; ii++){
-+		/* check if the env variable is listed */
-+                if (strcmp(env_ns[ii].nm, var) == 0) {
-+				return env_ns[ii].idx;
-+		}
-+
-+		/* if an alias is present, check if the alias matches
-+		 * the description
-+		 */
-+		if (env_ns[ii].alias != NULL) {
-+			if (strcmp(env_ns[ii].alias, var) == 0)	{
-+				return env_ns[ii].idx;
-+			}
-+		}
-+	}
-+	return 0;
-+}
-+
-+extern int *_prom_envp;
-+
-+/* FIXME: reading from the flash is extremly unstable. Sometime a read returns garbage,
-+ *        the next read some seconds later is ok. It looks like something is hidding or
-+ *        overlay the flash address at 0xb0000000. Is this possible?
-+ *
-+ *        The readb() and while() usage below is a attempt of a workarround - with limited success.
-+ */
-+
-+static inline struct env_variable* get_var_by_number(int index)
-+{
-+	struct env_variable *env_var = (struct env_variable *)_prom_envp;
-+	volatile unsigned char nr;
-+	int i;
-+
-+	env_var++;              /* skip signature */
-+
-+	i = 0;
-+	nr = readb(&(env_var->varNum));
-+
-+	while (i < max_env_entry && nr != 0xFF) {
-+		if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_PREFINED) {
-+			if (nr == index) {
-+				return env_var;
-+			}
-+		}
-+		i++;
-+		env_var = get_next_block(env_var);
-+		nr = readb(&(env_var->varNum));
-+        }
-+
-+	return NULL;
-+}
-+
-+static inline struct env_variable* get_var_by_name(char *var)
-+{
-+	struct env_variable *env_var = (struct env_variable *)_prom_envp;
-+	volatile unsigned char nr;
-+	int i;
-+
-+	env_var++;              /* skip signature */
-+
-+	nr = readb(&(env_var->varNum));
-+	i = 0;
-+
-+	while (i < max_env_entry && nr != 0xFF) {
-+		if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) {
-+			if (strcmp(var, env_var->data) == 0)
-+				return env_var;
-+		}
-+		i++;
-+		env_var = get_next_block(env_var);
-+		nr = readb(&(env_var->varNum));
-+        }
-+	return NULL;
-+}
-+
-+static inline struct env_variable* get_var(char *var)
-+{
-+	int index = var_to_idx(var);
-+
-+	if (index)
-+		return get_var_by_number(index);
-+	else
-+		return get_var_by_name(var);
-+
-+	return NULL;
-+}
-+
-+static inline char *get_value(struct env_variable* env_var)
-+{
-+	unsigned char *name;
-+	unsigned char *value;
-+	unsigned short chksum;
-+	int i;
-+
-+	chksum = env_var->varNum + env_var->ctrl + env_var->numCells;
-+
-+	if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) {
-+		name  = env_var->data;
-+		value = env_var->data + strlen(name) + 1;
-+
-+		for(i = 0; i < strlen(name); i++)
-+			chksum += name[i];
-+	} else
-+		value = env_var->data;
-+
-+	for (i = 0; i < strlen(value); i++)
-+		chksum += value[i];
-+
-+	chksum += env_var->chksum;
-+	chksum = ~(chksum);
-+
-+	if(chksum != 0) {
-+		return NULL;
-+	}
-+
-+	return value;
-+}
-+
-+struct psbl_rec {
-+    unsigned int psbl_size;
-+    unsigned int env_base;
-+    unsigned int env_size;
-+    unsigned int ffs_base;
-+    unsigned int ffs_size;
-+};
-+
-+char *prom_psp_getenv(char *envname)
-+{
-+    struct env_variable* env_var;
-+    char *value;
-+
-+    if (strcmp("bootloader", envname) == 0)
-+	    return "PSPBoot";
-+
-+    if (!(env_var = get_var(envname)))
-+	    return NULL;
-+
-+    value = get_value(env_var);
-+
-+    return value;
-+}
-diff -urN linux.old/arch/mips/ar7/reset.c linux.dev/arch/mips/ar7/reset.c
---- linux.old/arch/mips/ar7/reset.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/reset.c	2005-11-10 01:14:16.372731750 +0100
-@@ -0,0 +1,98 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ *  This program is free software; you can distribute it and/or modify it
-+ *  under the terms of the GNU General Public License (Version 2) as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  This program is distributed in the hope it will be useful, but WITHOUT
-+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ *  for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License along
-+ *  with this program; if not, write to the Free Software Foundation, Inc.,
-+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * Reset the AR7 boards.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/types.h>
-+
-+#include <asm/mipsregs.h>
-+#include <asm/reboot.h>
-+#include <asm/addrspace.h>
-+
-+int preserve_adam2 = 1;
-+
-+extern void adam2_exit(int retval);
-+
-+static void ar7_machine_restart(char *command);
-+static void ar7_machine_halt(void);
-+static void ar7_machine_power_off(void);
-+
-+static void ar7_machine_restart(char *command)
-+{
-+	volatile uint32_t *softres_reg = (void *)(KSEG1ADDR(0x08611600 + 0x4));
-+
-+	*softres_reg = 1;
-+}
-+
-+static void ar7_machine_halt(void)
-+{
-+
-+	if (preserve_adam2) {
-+		set_c0_status(ST0_BEV);
-+		adam2_exit(0);
-+	} else {
-+		/* I'd like to have Alt-SysRq-b work in this state.
-+		 * What's missing here? The timer interrupt is still running.
-+		 * Why doesn't the UART work anymore? */
-+		while(1) {
-+		  __asm__(".set\tmips3\n\t"
-+			  "wait\n\t"
-+			  ".set\tmips0");
-+		}
-+	}
-+}
-+
-+static void ar7_machine_power_off(void)
-+{
-+	volatile uint32_t *power_reg = (void *)(KSEG1ADDR(0x08610A00));
-+	uint32_t power_state = *power_reg;
-+
-+	/* add something to turn LEDs off? */
-+
-+	power_state &= ~(3 << 30);
-+	power_state |=  (3 << 30); /* power down */
-+	*power_reg = power_state;
-+
-+	printk("after power down?\n");
-+}
-+
-+void ar7_reboot_setup(void)
-+{
-+	_machine_restart = ar7_machine_restart;
-+	_machine_halt = ar7_machine_halt;
-+	_machine_power_off = ar7_machine_power_off;
-+}
-+
-+static int __init ar7_do_preserve_adam2(char *s)
-+{
-+	if (!strcmp(s, "no") || !strcmp(s, "0"))
-+		preserve_adam2 = 0;
-+	else
-+	  	preserve_adam2 = 1;
-+        return 1;
-+}
-+
-+__setup("adam2=", ar7_do_preserve_adam2);
-diff -urN linux.old/arch/mips/ar7/setup.c linux.dev/arch/mips/ar7/setup.c
---- linux.old/arch/mips/ar7/setup.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/setup.c	2005-11-10 01:12:43.946955500 +0100
-@@ -0,0 +1,143 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
-+ *
-+ *  This program is free software; you can distribute it and/or modify it
-+ *  under the terms of the GNU General Public License (Version 2) as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  This program is distributed in the hope it will be useful, but WITHOUT
-+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ *  for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License along
-+ *  with this program; if not, write to the Free Software Foundation, Inc.,
-+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/string.h>
-+#include <linux/irq.h>
-+
-+#include <asm/processor.h>
-+#include <asm/irq.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/time.h>
-+#include <asm/mipsregs.h>
-+#include <asm/mips-boards/prom.h>
-+
-+#ifdef CONFIG_KGDB
-+extern void rs_kgdb_hook(int);
-+extern void breakpoint(void);
-+int remote_debug = 0;
-+#endif
-+
-+extern void ar7_reboot_setup(void);
-+extern void ar7_irq_init(int);
-+extern asmlinkage void ar7IRQ(void);
-+
-+void ar7_time_init(void)
-+{
-+  /* XXX runtime */
-+  mips_hpt_frequency = CONFIG_AR7_CPU * 500000;
-+}
-+
-+void ar7_timer_setup(struct irqaction *irq)
-+{
-+  setup_irq(7, irq);
-+  set_c0_status(IE_IRQ5);
-+}
-+
-+void __init init_IRQ(void)
-+{
-+  init_generic_irq();
-+  mips_cpu_irq_init(0);
-+  ar7_irq_init(8);
-+
-+  /* Now safe to set the exception vector. */
-+  set_except_vector(0, ar7IRQ);
-+
-+#ifdef CONFIG_KGDB
-+  if (remote_debug)
-+  {
-+    set_debug_traps();
-+    breakpoint();
-+  }
-+#endif
-+}
-+
-+const char *get_system_type(void)
-+{
-+	return "Texas Instruments AR7";
-+}
-+
-+void __init ar7_setup(void)
-+{
-+#ifdef CONFIG_KGDB
-+	int rs_putDebugChar(char);
-+	char rs_getDebugChar(void);
-+	extern int (*generic_putDebugChar)(char);
-+	extern char (*generic_getDebugChar)(void);
-+#endif
-+	char *argptr;
-+#ifdef CONFIG_SERIAL_CONSOLE
-+	argptr = prom_getcmdline();
-+	if ((argptr = strstr(argptr, "console=")) == NULL) {
-+		char console[20];
-+		char *s;
-+		int i = 0;
-+		
-+		s = prom_getenv("modetty0");
-+		strcpy(console, "38400");
-+		
-+		if (s != NULL) {
-+			while (s[i] >= '0' && s[i] <= '9')
-+				i++;
-+		
-+			if (i > 0) {
-+				strncpy(console, s, i);
-+				console[i] = 0;
-+			}
-+		}
-+		
-+		argptr = prom_getcmdline();
-+		strcat(argptr, " console=ttyS0,");
-+		strcat(argptr, console);
-+	}
-+#endif
-+
-+#ifdef CONFIG_KGDB
-+	argptr = prom_getcmdline();
-+	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-+		int line;
-+		argptr += strlen("kgdb=ttyS");
-+		if (*argptr != '0' && *argptr != '1')
-+			printk("KGDB: Uknown serial line /dev/ttyS%c, "
-+					"falling back to /dev/ttyS1\n", *argptr);
-+		line = *argptr == '0' ? 0 : 1;
-+		printk("KGDB: Using serial line /dev/ttyS%d for session\n",
-+				line ? 1 : 0);
-+
-+		rs_kgdb_hook(line);
-+		generic_putDebugChar = rs_putDebugChar;
-+		generic_getDebugChar = rs_getDebugChar;
-+
-+		prom_printf("KGDB: Using serial line /dev/ttyS%d for session, "
-+				"please connect your debugger\n", line ? 1 : 0);
-+
-+		remote_debug = 1;
-+		/* Breakpoints are in init_IRQ() */
-+	}
-+#endif
-+
-+	argptr = prom_getcmdline();
-+	if ((argptr = strstr(argptr, "nofpu")) != NULL)
-+		cpu_data[0].options &= ~MIPS_CPU_FPU;
-+
-+	ar7_reboot_setup();
-+
-+	board_time_init = ar7_time_init;
-+	board_timer_setup = ar7_timer_setup;
-+}
-diff -urN linux.old/arch/mips/ar7/tnetd73xx_misc.c linux.dev/arch/mips/ar7/tnetd73xx_misc.c
---- linux.old/arch/mips/ar7/tnetd73xx_misc.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/tnetd73xx_misc.c	2005-11-10 01:12:43.946955500 +0100
-@@ -0,0 +1,921 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    TNETD73xx Misc modules API Source
-+ ******************************************************************************
-+ * FILE NAME:       tnetd73xx_misc.c
-+ *
-+ * DESCRIPTION:     Clock Control, Reset Control, Power Management, GPIO
-+ *                  FSER Modules API
-+ *                  As per TNETD73xx specifications
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - Sharath Kumar     PSP TII  
-+ * 14 Feb 03 - Anant Gole        PSP TII
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+#include <linux/types.h>
-+#include <asm/ar7/tnetd73xx.h>
-+#include <asm/ar7/tnetd73xx_misc.h>
-+
-+/* TNETD73XX Revision */
-+u32 tnetd73xx_get_revision(void)
-+{
-+	/* Read Chip revision register - This register is from GPIO module */
-+	return ( (u32) REG32_DATA(TNETD73XX_CVR));
-+}
-+
-+/*****************************************************************************
-+ * Reset Control Module
-+ *****************************************************************************/
-+
-+
-+void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module, TNETD73XX_RESET_CTRL_T reset_ctrl)
-+{
-+	u32 reset_status;
-+
-+	/* read current reset register */
-+	REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status);
-+
-+	if (reset_ctrl == OUT_OF_RESET)
-+	{
-+		/* bring module out of reset */
-+		reset_status |= (1 << reset_module);
-+	}
-+	else
-+	{
-+		/* put module in reset */
-+		reset_status &= (~(1 << reset_module));
-+	}
-+
-+	/* write to the reset register */
-+	REG32_WRITE(TNETD73XX_RST_CTRL_PRCR, reset_status);
-+}
-+
-+
-+TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status (TNETD73XX_RESET_MODULE_T reset_module)
-+{
-+	u32 reset_status;
-+
-+	REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status);
-+	return ( (reset_status & (1 << reset_module)) ? OUT_OF_RESET : IN_RESET );
-+}
-+
-+void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode)
-+{
-+	REG32_WRITE(TNETD73XX_RST_CTRL_SWRCR, mode);
-+}
-+
-+#define TNETD73XX_RST_CTRL_RSR_MASK 0x3
-+
-+TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status()
-+{
-+	u32 sys_reset_status;
-+
-+	REG32_READ(TNETD73XX_RST_CTRL_RSR, sys_reset_status);
-+
-+	return ( (TNETD73XX_SYS_RESET_STATUS_T) (sys_reset_status & TNETD73XX_RST_CTRL_RSR_MASK) );
-+}
-+
-+
-+/*****************************************************************************
-+ * Power Control Module
-+ *****************************************************************************/
-+#define TNETD73XX_GLOBAL_POWER_DOWN_MASK    0x3FFFFFFF      /* bit 31, 30 masked */
-+#define TNETD73XX_GLOBAL_POWER_DOWN_BIT     30              /* shift to bit 30, 31 */
-+
-+
-+void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module, TNETD73XX_POWER_CTRL_T power_ctrl)
-+{
-+	u32 power_status;
-+
-+	/* read current power down control register */
-+	REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
-+
-+	if (power_ctrl == POWER_CTRL_POWER_DOWN)
-+	{
-+		/* power down the module */
-+		power_status |= (1 << power_module);
-+	}
-+	else
-+	{
-+		/* power on the module */
-+		power_status &= (~(1 << power_module));
-+	}
-+
-+	/* write to the reset register */
-+	REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status);
-+}
-+
-+TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module)
-+{
-+	u32 power_status;
-+
-+	/* read current power down control register */
-+	REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
-+
-+	return ( (power_status & (1 << power_module)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP );
-+}
-+
-+void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode)
-+{
-+	u32 power_status;
-+
-+	/* read current power down control register */
-+	REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
-+
-+	power_status &= TNETD73XX_GLOBAL_POWER_DOWN_MASK;
-+	power_status |= ( power_mode << TNETD73XX_GLOBAL_POWER_DOWN_BIT);
-+
-+	/* write to power down control register */
-+	REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status);
-+}
-+
-+TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode()
-+{
-+	u32 power_status;
-+
-+	/* read current power down control register */
-+	REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
-+
-+	power_status &= (~TNETD73XX_GLOBAL_POWER_DOWN_MASK);
-+	power_status = ( power_status >> TNETD73XX_GLOBAL_POWER_DOWN_BIT);
-+
-+	return ( (TNETD73XX_SYS_POWER_MODE_T) power_status );
-+}
-+
-+
-+/*****************************************************************************
-+ * Wakeup Control
-+ *****************************************************************************/
-+
-+#define TNETD73XX_WAKEUP_POLARITY_BIT   16
-+
-+void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int,
-+		TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl,
-+		TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity)
-+{
-+	u32 wakeup_status;
-+
-+	/* read the wakeup control register */
-+	REG32_READ(TNETD73XX_POWER_CTRL_WKCR, wakeup_status);
-+
-+	/* enable/disable */
-+	if (wakeup_ctrl == WAKEUP_ENABLED)
-+	{
-+		/* enable wakeup */
-+		wakeup_status |= wakeup_int;
-+	}
-+	else
-+	{
-+		/* disable wakeup */
-+		wakeup_status &= (~wakeup_int);
-+	}
-+
-+	/* set polarity */
-+	if (wakeup_polarity == WAKEUP_ACTIVE_LOW)
-+	{
-+		wakeup_status |= (wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT);
-+	}
-+	else
-+	{
-+		wakeup_status &= ~(wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT);
-+	}
-+
-+	/* write  the wakeup control register */
-+	REG32_WRITE(TNETD73XX_POWER_CTRL_WKCR, wakeup_status);
-+}
-+
-+
-+/*****************************************************************************
-+ * FSER  Control
-+ *****************************************************************************/
-+
-+void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode)
-+{
-+	REG32_WRITE(TNETD73XX_FSER_BASE, fser_mode);
-+}
-+
-+/*****************************************************************************
-+ * Clock Control
-+ *****************************************************************************/
-+
-+#define MIN(x,y)               ( ((x) <  (y)) ? (x) : (y) )
-+#define MAX(x,y)               ( ((x) >  (y)) ? (x) : (y) )
-+#define ABS(x)                 ( ((signed)(x) > 0) ? (x) : (-(x)) )
-+#define CEIL(x,y)              ( ((x) + (y) / 2) / (y) )
-+
-+#define CLKC_CLKCR(x)          (TNETD73XX_CLOCK_CTRL_BASE + 0x20 + (0x20 * (x)))
-+#define CLKC_CLKPLLCR(x)       (TNETD73XX_CLOCK_CTRL_BASE + 0x30 + (0x20 * (x)))
-+
-+#define CLKC_PRE_DIVIDER        0x0000001F
-+#define CLKC_POST_DIVIDER       0x001F0000
-+
-+#define CLKC_PLL_STATUS         0x1
-+#define CLKC_PLL_FACTOR         0x0000F000
-+
-+#define BOOTCR_PLL_BYPASS       (1 << 5)
-+#define BOOTCR_MIPS_ASYNC_MODE  (1 << 25)
-+
-+#define MIPS_PLL_SELECT         0x00030000
-+#define SYSTEM_PLL_SELECT       0x0000C000
-+#define USB_PLL_SELECT          0x000C0000
-+#define ADSLSS_PLL_SELECT       0x00C00000
-+
-+#define MIPS_AFECLKI_SELECT     0x00000000
-+#define MIPS_REFCLKI_SELECT     0x00010000
-+#define MIPS_XTAL3IN_SELECT     0x00020000
-+
-+#define SYSTEM_AFECLKI_SELECT   0x00000000
-+#define SYSTEM_REFCLKI_SELECT   0x00004000
-+#define SYSTEM_XTAL3IN_SELECT   0x00008000
-+#define SYSTEM_MIPSPLL_SELECT   0x0000C000
-+
-+#define USB_SYSPLL_SELECT       0x00000000
-+#define USB_REFCLKI_SELECT      0x00040000
-+#define USB_XTAL3IN_SELECT      0x00080000
-+#define USB_MIPSPLL_SELECT      0x000C0000
-+
-+#define ADSLSS_AFECLKI_SELECT   0x00000000
-+#define ADSLSS_REFCLKI_SELECT   0x00400000
-+#define ADSLSS_XTAL3IN_SELECT   0x00800000
-+#define ADSLSS_MIPSPLL_SELECT   0x00C00000
-+
-+#define  SYS_MAX                CLK_MHZ(150)
-+#define  SYS_MIN                CLK_MHZ(1)
-+
-+#define  MIPS_SYNC_MAX          SYS_MAX
-+#define  MIPS_ASYNC_MAX         CLK_MHZ(160)
-+#define  MIPS_MIN               CLK_MHZ(1)
-+
-+#define  USB_MAX                CLK_MHZ(100)
-+#define  USB_MIN                CLK_MHZ(1)
-+
-+#define  ADSL_MAX               CLK_MHZ(180)
-+#define  ADSL_MIN               CLK_MHZ(1)
-+
-+#define  PLL_MUL_MAXFACTOR      15
-+#define  MAX_DIV_VALUE          32
-+#define  MIN_DIV_VALUE          1
-+
-+#define  MIN_PLL_INP_FREQ       CLK_MHZ(8)
-+#define  MAX_PLL_INP_FREQ       CLK_MHZ(100)
-+
-+#define  DIVIDER_LOCK_TIME      10100
-+#define  PLL_LOCK_TIME          10100 * 75
-+
-+
-+
-+							      /****************************************************************************
-+							       * DATA PURPOSE:    PRIVATE Variables
-+							       **************************************************************************/
-+							      static u32 *clk_src[4];
-+							      static u32 mips_pll_out;
-+							      static u32 sys_pll_out;
-+							      static u32 afeclk_inp;
-+							      static u32 refclk_inp;
-+							      static u32 xtal_inp;
-+							      static u32 present_min;
-+							      static u32 present_max;
-+
-+							      /* Forward References */
-+							      static u32 find_gcd(u32 min, u32 max);
-+							      static u32 compute_prediv( u32 divider, u32 min, u32 max);
-+							      static void get_val(u32 base_freq, u32 output_freq,u32 *multiplier, u32 *divider);
-+							      static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id);
-+							      static void find_approx(u32 *,u32 *,u32);
-+
-+							      /****************************************************************************
-+							       * FUNCTION: tnetd73xx_clkc_init
-+							       ****************************************************************************
-+							       * Description: The routine initializes the internal variables depending on
-+							       *              on the sources selected for different clocks.
-+							       ***************************************************************************/
-+void tnetd73xx_clkc_init(u32 afeclk, u32 refclk, u32 xtal3in)
-+{
-+
-+	u32 choice;
-+
-+	afeclk_inp = afeclk;
-+	refclk_inp = refclk;
-+	xtal_inp = xtal3in;
-+
-+	choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & MIPS_PLL_SELECT;
-+	switch(choice)
-+	{
-+		case MIPS_AFECLKI_SELECT:
-+			clk_src[CLKC_MIPS] = &afeclk_inp;
-+			break;
-+
-+		case MIPS_REFCLKI_SELECT:
-+			clk_src[CLKC_MIPS] = &refclk_inp;
-+			break;
-+
-+		case MIPS_XTAL3IN_SELECT:
-+			clk_src[CLKC_MIPS] = &xtal_inp;
-+			break;
-+
-+		default :
-+			clk_src[CLKC_MIPS] = 0;
-+
-+	}
-+
-+	choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & SYSTEM_PLL_SELECT;
-+	switch(choice)
-+	{
-+		case SYSTEM_AFECLKI_SELECT:
-+			clk_src[CLKC_SYS] = &afeclk_inp;
-+			break;
-+
-+		case SYSTEM_REFCLKI_SELECT:
-+			clk_src[CLKC_SYS] = &refclk_inp;
-+			break;
-+
-+		case SYSTEM_XTAL3IN_SELECT:
-+			clk_src[CLKC_SYS] = &xtal_inp;
-+			break;
-+
-+		case SYSTEM_MIPSPLL_SELECT:
-+			clk_src[CLKC_SYS] = &mips_pll_out;
-+			break;
-+
-+		default :
-+			clk_src[CLKC_SYS] = 0;
-+
-+	}
-+
-+
-+	choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & ADSLSS_PLL_SELECT;
-+	switch(choice)
-+	{
-+		case ADSLSS_AFECLKI_SELECT:
-+			clk_src[CLKC_ADSLSS] = &afeclk_inp;
-+			break;
-+
-+		case ADSLSS_REFCLKI_SELECT:
-+			clk_src[CLKC_ADSLSS] = &refclk_inp;
-+			break;
-+
-+		case ADSLSS_XTAL3IN_SELECT:
-+			clk_src[CLKC_ADSLSS] = &xtal_inp;
-+			break;
-+
-+		case ADSLSS_MIPSPLL_SELECT:
-+			clk_src[CLKC_ADSLSS] = &mips_pll_out;
-+			break;
-+
-+		default :
-+			clk_src[CLKC_ADSLSS] = 0;
-+
-+	}
-+
-+
-+	choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & USB_PLL_SELECT;
-+	switch(choice)
-+	{
-+		case USB_SYSPLL_SELECT:
-+			clk_src[CLKC_USB] = &sys_pll_out ;
-+			break;
-+
-+		case USB_REFCLKI_SELECT:
-+			clk_src[CLKC_USB] = &refclk_inp;
-+			break;
-+
-+		case USB_XTAL3IN_SELECT:
-+			clk_src[CLKC_USB] = &xtal_inp;
-+			break;
-+
-+		case USB_MIPSPLL_SELECT:
-+			clk_src[CLKC_USB] = &mips_pll_out;
-+			break;
-+
-+		default :
-+			clk_src[CLKC_USB] = 0;
-+
-+	}
-+}
-+
-+
-+
-+/****************************************************************************
-+ * FUNCTION: tnetd73xx_clkc_set_freq
-+ ****************************************************************************
-+ * Description: The above routine is called to set the output_frequency of the
-+ *              selected clock(using clk_id) to the  required value given
-+ *              by the variable output_freq.
-+ ***************************************************************************/
-+TNETD73XX_ERR tnetd73xx_clkc_set_freq
-+(
-+ TNETD73XX_CLKC_ID_T clk_id,
-+ u32              output_freq
-+ )
-+{
-+	u32 base_freq;
-+	u32 multiplier;
-+	u32 divider;
-+	u32 min_prediv;
-+	u32 max_prediv;
-+	u32 prediv;
-+	u32 postdiv;
-+	u32 temp;
-+
-+	/* check if PLLs are bypassed*/
-+	if(REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS)
-+	{
-+		return TNETD73XX_ERR_ERROR;
-+	}
-+
-+	/*check if the requested output_frequency is in valid range*/
-+	switch( clk_id )
-+	{
-+		case CLKC_SYS:
-+			if( output_freq < SYS_MIN || output_freq > SYS_MAX)
-+			{
-+				return TNETD73XX_ERR_ERROR;
-+			}
-+			present_min = SYS_MIN;
-+			present_max = SYS_MAX;
-+			break;
-+
-+		case CLKC_MIPS:
-+			if((output_freq < MIPS_MIN) ||
-+					(output_freq > ((REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX)))
-+			{
-+				return TNETD73XX_ERR_ERROR;
-+			}
-+			present_min = MIPS_MIN;
-+			present_max = (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX;
-+			break;
-+
-+		case CLKC_USB:
-+			if( output_freq < USB_MIN || output_freq > USB_MAX)
-+			{
-+				return TNETD73XX_ERR_ERROR;
-+			}
-+			present_min = USB_MIN;
-+			present_max = USB_MAX;
-+			break;
-+
-+		case CLKC_ADSLSS:
-+			if( output_freq < ADSL_MIN || output_freq > ADSL_MAX)
-+			{
-+				return TNETD73XX_ERR_ERROR;
-+			}
-+			present_min = ADSL_MIN;
-+			present_max = ADSL_MAX;
-+			break;
-+	}
-+
-+
-+	base_freq = get_base_frequency(clk_id);
-+
-+
-+	/* check for minimum base frequency value */
-+	if( base_freq < MIN_PLL_INP_FREQ)
-+	{
-+		return TNETD73XX_ERR_ERROR;
-+	}
-+
-+	get_val(output_freq, base_freq, &multiplier, &divider);
-+
-+	/* check multiplier range  */
-+	if( (multiplier  > PLL_MUL_MAXFACTOR) || (multiplier <= 0) )
-+	{
-+		return TNETD73XX_ERR_ERROR;
-+	}
-+
-+	/* check divider value */
-+	if( divider == 0 )
-+	{
-+		return TNETD73XX_ERR_ERROR;
-+	}
-+
-+	/*compute minimum and maximum predivider values */
-+	min_prediv = MAX(base_freq / MAX_PLL_INP_FREQ + 1, divider / MAX_DIV_VALUE + 1);
-+	max_prediv = MIN(base_freq / MIN_PLL_INP_FREQ, MAX_DIV_VALUE);
-+
-+	/*adjust  the value of divider so that it not less than minimum predivider value*/
-+	if (divider < min_prediv)
-+	{
-+		temp = CEIL(min_prediv, divider);
-+		if ((temp * multiplier) > PLL_MUL_MAXFACTOR)
-+		{
-+			return TNETD73XX_ERR_ERROR  ;
-+		}
-+		else
-+		{
-+			multiplier = temp * multiplier;
-+			divider = min_prediv;
-+		}
-+
-+	}
-+
-+	/* compute predivider  and postdivider values */
-+	prediv = compute_prediv (divider, min_prediv, max_prediv);
-+	postdiv = CEIL(divider,prediv);
-+
-+	/*return fail if postdivider value falls out of range */
-+	if(postdiv > MAX_DIV_VALUE)
-+	{
-+		return TNETD73XX_ERR_ERROR;
-+	}
-+
-+
-+	/*write predivider and postdivider values*/
-+	/* pre-Divider and post-divider are 5 bit N+1 dividers */
-+	REG32_WRITE(CLKC_CLKCR(clk_id), ((postdiv -1) & 0x1F) << 16 | ((prediv -1) & 0x1F) );
-+
-+	/*wait for divider output to stabilise*/
-+	for(temp =0; temp < DIVIDER_LOCK_TIME; temp++);
-+
-+	/*write to PLL clock register*/
-+
-+	if(clk_id == CLKC_SYS)
-+	{
-+		/* but before writing put DRAM to hold mode */
-+		REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) |= 0x80000000;
-+	}
-+	/*Bring PLL into div mode */
-+	REG32_WRITE(CLKC_CLKPLLCR(clk_id), 0x4);
-+
-+	/*compute the word to be written to PLLCR
-+	 *corresponding to multiplier value
-+	 */
-+	multiplier = (((multiplier - 1) & 0xf) << 12)| ((255 <<3) | 0x0e);
-+
-+	/* wait till PLL enters div mode */
-+	while(REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS)
-+		/*nothing*/;
-+
-+	REG32_WRITE(CLKC_CLKPLLCR(clk_id), multiplier);
-+
-+	while(!REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS)
-+		/*nothing*/;
-+
-+
-+	/*wait for External pll to lock*/
-+	for(temp =0; temp < PLL_LOCK_TIME; temp++);
-+
-+	if(clk_id == CLKC_SYS)
-+	{
-+		/* Bring DRAM out of hold */
-+		REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) &= ~0x80000000;
-+	}
-+
-+	return TNETD73XX_ERR_OK ;
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: tnetd73xx_clkc_get_freq
-+ ****************************************************************************
-+ * Description: The above routine is called to get the output_frequency of the
-+ *              selected clock( clk_id)
-+ ***************************************************************************/
-+u32 tnetd73xx_clkc_get_freq
-+(
-+ TNETD73XX_CLKC_ID_T clk_id
-+ )
-+{
-+
-+	u32  clk_ctrl_register;
-+	u32  clk_pll_setting;
-+	u32  clk_predivider;
-+	u32  clk_postdivider;
-+	u16  pll_factor;
-+	u32  base_freq;
-+	u32  divider;
-+
-+	base_freq = get_base_frequency(clk_id);
-+
-+	clk_ctrl_register = REG32_DATA(CLKC_CLKCR(clk_id));
-+
-+	/* pre-Divider and post-divider are 5 bit N+1 dividers */
-+	clk_predivider = (CLKC_PRE_DIVIDER & clk_ctrl_register) + 1;
-+	clk_postdivider = ((CLKC_POST_DIVIDER & clk_ctrl_register) >> 16) + 1;
-+
-+	divider =  clk_predivider * clk_postdivider;
-+
-+
-+	if( (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS))
-+	{
-+		return (CEIL(base_freq, divider));  /* PLLs bypassed.*/
-+	}
-+
-+
-+	else
-+	{
-+		/*  return the current clock speed based upon the PLL setting */
-+		clk_pll_setting = REG32_DATA(CLKC_CLKPLLCR(clk_id));
-+
-+		/* Get the PLL multiplication factor */
-+		pll_factor = ((clk_pll_setting & CLKC_PLL_FACTOR) >> 12) + 1;
-+
-+		/* Check if we're in divide mode or multiply mode */
-+		if((clk_pll_setting & 0x1)   == 0)
-+		{
-+			/* We're in divide mode */
-+			if(pll_factor <  0x10)
-+				return (CEIL(base_freq >> 1, divider));
-+			else
-+				return (CEIL(base_freq >> 2, divider));
-+		}
-+
-+		else     /* We're in PLL mode */
-+		{
-+			/* See if PLLNDIV & PLLDIV are set */
-+			if((clk_pll_setting & 0x0800) && (clk_pll_setting & 0x2))
-+			{
-+				if(clk_pll_setting & 0x1000)
-+				{
-+					/* clk = base_freq * k/2  */
-+					return(CEIL((base_freq * pll_factor) >> 1, divider));
-+				}
-+				else
-+				{
-+					/* clk = base_freq * (k-1) / 4)*/
-+					return(CEIL((base_freq * (pll_factor - 1)) >>2, divider));
-+				}
-+			}
-+			else
-+			{
-+				if(pll_factor < 0x10)
-+				{
-+					/* clk = base_freq * k */
-+					return(CEIL(base_freq * pll_factor, divider));
-+				}
-+
-+				else
-+				{
-+					/* clk = base_freq  */
-+					return(CEIL(base_freq, divider));
-+				}
-+			}
-+		}
-+		return(0); /* Should never reach here */
-+
-+	}
-+
-+}
-+
-+
-+/* local helper functions */
-+
-+/****************************************************************************
-+ * FUNCTION: get_base_frequency
-+ ****************************************************************************
-+ * Description: The above routine is called to get base frequency of the clocks.
-+ ***************************************************************************/
-+
-+static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id)
-+{
-+	/* update the current MIPs PLL output value, if the required
-+	 * source is MIPS PLL
-+	 */
-+	if ( clk_src[clk_id] == &mips_pll_out)
-+	{
-+		*clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_MIPS);
-+	}
-+
-+
-+	/* update the current System PLL output value, if the required
-+	 * source is system PLL
-+	 */
-+	if ( clk_src[clk_id] == &sys_pll_out)
-+	{
-+		*clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_SYS);
-+	}
-+
-+	return (*clk_src[clk_id]);
-+
-+}
-+
-+
-+
-+/****************************************************************************
-+ * FUNCTION: find_gcd
-+ ****************************************************************************
-+ * Description: The above routine is called to find gcd of 2 numbers.
-+ ***************************************************************************/
-+static u32 find_gcd
-+(
-+ u32 min,
-+ u32 max
-+ )
-+{
-+	if (max % min == 0)
-+	{
-+		return min;
-+	}
-+	else
-+	{
-+		return find_gcd(max % min, min);
-+	}
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: compute_prediv
-+ ****************************************************************************
-+ * Description: The above routine is called to compute predivider value
-+ ***************************************************************************/
-+static u32 compute_prediv(u32 divider, u32 min, u32 max)
-+{
-+	u16 prediv;
-+
-+	/* return the divider itself it it falls within the range of predivider*/
-+	if (min <= divider && divider <= max)
-+	{
-+		return divider;
-+	}
-+
-+	/* find a value for prediv such that it is a factor of divider */
-+	for (prediv = max; prediv >= min ; prediv--)
-+	{
-+		if ( (divider % prediv) == 0 )
-+		{
-+			return prediv;
-+		}
-+	}
-+
-+	/* No such factor exists,  return min as prediv */
-+	return min;
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: get_val
-+ ****************************************************************************
-+ * Description: This routine is called to get values of divider and multiplier.
-+ ***************************************************************************/
-+
-+static void get_val(u32 output_freq, u32 base_freq,u32 *multiplier, u32 *divider)
-+{
-+	u32 temp_mul;
-+	u32 temp_div;
-+	u32 gcd;
-+	u32 min_freq;
-+	u32 max_freq;
-+
-+	/* find gcd of base_freq, output_freq */
-+	min_freq = (base_freq < output_freq) ? base_freq : output_freq;
-+	max_freq = (base_freq > output_freq) ? base_freq : output_freq;
-+	gcd = find_gcd(min_freq , max_freq);
-+
-+	if(gcd == 0)
-+		return;  /* ERROR */
-+
-+	/* compute values of multiplier and divider */
-+	temp_mul = output_freq / gcd;
-+	temp_div = base_freq / gcd;
-+
-+
-+	/* set multiplier such that 1 <= multiplier <= PLL_MUL_MAXFACTOR */
-+	if( temp_mul > PLL_MUL_MAXFACTOR )
-+	{
-+		if((temp_mul / temp_div) > PLL_MUL_MAXFACTOR)
-+			return;
-+
-+		find_approx(&temp_mul,&temp_div,base_freq);
-+	}
-+
-+	*multiplier = temp_mul;
-+	*divider    = temp_div;
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: find_approx
-+ ****************************************************************************
-+ * Description: This function gets the approx value of num/denom.
-+ ***************************************************************************/
-+
-+static void find_approx(u32 *num,u32 *denom,u32 base_freq)
-+{
-+	u32 num1;
-+	u32 denom1;
-+	u32 num2;
-+	u32 denom2;
-+	int32_t closest;
-+	int32_t prev_closest;
-+	u32 temp_num;
-+	u32 temp_denom;
-+	u32 normalize;
-+	u32 gcd;
-+	u32 output_freq;
-+
-+	num1 = *num;
-+	denom1 = *denom;
-+
-+	prev_closest = 0x7fffffff; /* maximum possible value */
-+	num2 = num1;
-+	denom2 = denom1;
-+
-+	/* start with  max */
-+	for(temp_num = 15; temp_num >=1; temp_num--)
-+	{
-+
-+		temp_denom = CEIL(temp_num * denom1, num1);
-+		output_freq = (temp_num * base_freq) / temp_denom;
-+
-+		if(temp_denom < 1)
-+		{
-+			break;
-+		}
-+		else
-+		{
-+			normalize = CEIL(num1,temp_num);
-+			closest = (ABS((num1 * (temp_denom) ) - (temp_num * denom1)))  * normalize;
-+			if(closest < prev_closest && output_freq > present_min && output_freq <present_max)
-+			{
-+				prev_closest = closest;
-+				num2 = temp_num;
-+				denom2 = temp_denom;
-+			}
-+
-+		}
-+
-+	}
-+
-+	gcd = find_gcd(num2,denom2);
-+	num2 = num2 / gcd;
-+	denom2 = denom2 /gcd;
-+
-+	*num      = num2;
-+	*denom    = denom2;
-+}
-+
-+
-+/*****************************************************************************
-+ * GPIO  Control
-+ *****************************************************************************/
-+
-+/****************************************************************************
-+ * FUNCTION: tnetd73xx_gpio_init
-+ ***************************************************************************/
-+void tnetd73xx_gpio_init()
-+{
-+	/* Bring module out of reset */
-+	tnetd73xx_reset_ctrl(RESET_MODULE_GPIO, OUT_OF_RESET);
-+	REG32_WRITE(TNETD73XX_GPIOENR, 0xFFFFFFFF);    
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: tnetd73xx_gpio_ctrl
-+ ***************************************************************************/
-+void tnetd73xx_gpio_ctrl(TNETD73XX_GPIO_PIN_T gpio_pin, 
-+		TNETD73XX_GPIO_PIN_MODE_T pin_mode,
-+		TNETD73XX_GPIO_PIN_DIRECTION_T pin_direction)
-+{
-+	u32 pin_status;
-+	REG32_READ(TNETD73XX_GPIOENR, pin_status);
-+	if (pin_mode == GPIO_PIN)
-+	{
-+		pin_status |= (1 << gpio_pin);
-+		REG32_WRITE(TNETD73XX_GPIOENR, pin_status);
-+
-+		/* Set pin direction */
-+		REG32_READ(TNETD73XX_GPIOPDIRR, pin_status);
-+		if (pin_direction == GPIO_INPUT_PIN)
-+		{
-+			pin_status |= (1 << gpio_pin);
-+		}
-+		else /* GPIO_OUTPUT_PIN */
-+		{
-+			pin_status &= (~(1 << gpio_pin));
-+		}
-+		REG32_WRITE(TNETD73XX_GPIOPDIRR, pin_status);
-+	}
-+	else /* FUNCTIONAL PIN */
-+	{
-+		pin_status &= (~(1 << gpio_pin));
-+		REG32_WRITE(TNETD73XX_GPIOENR, pin_status);
-+	}
-+
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: tnetd73xx_gpio_out
-+ ***************************************************************************/
-+void tnetd73xx_gpio_out(TNETD73XX_GPIO_PIN_T gpio_pin, int value)
-+{
-+	u32 pin_value;
-+
-+	REG32_READ(TNETD73XX_GPIODOUTR, pin_value);
-+	if (value == 1)
-+	{
-+		pin_value |= (1 << gpio_pin);
-+	}
-+	else
-+	{
-+		pin_value &= (~(1 << gpio_pin));
-+	}
-+	REG32_WRITE(TNETD73XX_GPIODOUTR, pin_value);
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: tnetd73xx_gpio_in
-+ ***************************************************************************/
-+int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin)
-+{
-+	u32 pin_value;
-+	REG32_READ(TNETD73XX_GPIODINR, pin_value);
-+	return ( (pin_value & (1 << gpio_pin)) ? 1 : 0 );
-+}
-+
-diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in
---- linux.old/arch/mips/config-shared.in	2005-10-21 16:43:18.917114000 +0200
-+++ linux.dev/arch/mips/config-shared.in	2005-11-10 01:12:43.950955750 +0100
-@@ -20,6 +20,16 @@
- mainmenu_option next_comment
- comment 'Machine selection'
- dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL
-+dep_bool 'Support for Texas Instruments AR7 (EXPERIMENTAL)' CONFIG_AR7 $CONFIG_MIPS32 $CONFIG_EXPERIMENTAL
-+if [ "$CONFIG_AR7" = "y" ]; then
-+   choice 'Texas Instruments Reference Platform' \
-+      "AR7DB CONFIG_AR7DB \
-+      AR7RD CONFIG_AR7RD \
-+      AR7WRD CONFIG_AR7WRD" AR7DB
-+   int 'Texas Instruments AR7 CPU Frequency' CONFIG_AR7_CPU 150
-+   int 'Texas Instruments AR7 System Frequency' CONFIG_AR7_SYS 125
-+   hex 'Texas Instruments AR7 SDRAM Start' CONFIG_AR7_MEMORY 0x14000000
-+fi
- dep_bool 'Support for Alchemy Bosporus board' CONFIG_MIPS_BOSPORUS $CONFIG_MIPS32
- dep_bool 'Support for FIC Multimedia Player board' CONFIG_MIPS_FICMMP $CONFIG_MIPS32
- dep_bool 'Support for Alchemy Mirage board' CONFIG_MIPS_MIRAGE $CONFIG_MIPS32
-@@ -239,6 +249,11 @@
-    define_bool CONFIG_NONCOHERENT_IO y
-    define_bool CONFIG_PC_KEYB y
- fi
-+if [ "$CONFIG_AR7" = "y" ]; then
-+   define_bool CONFIG_IRQ_CPU y
-+   define_bool CONFIG_NONCOHERENT_IO y
-+   define_bool CONFIG_SWAP_IO_SPACE y
-+fi
- if [ "$CONFIG_CASIO_E55" = "y" ]; then
-    define_bool CONFIG_IRQ_CPU y
-    define_bool CONFIG_NONCOHERENT_IO y
-@@ -736,6 +751,7 @@
- mainmenu_option next_comment
- comment 'General setup'
- if [ "$CONFIG_ACER_PICA_61" = "y" -o \
-+     "$CONFIG_AR7" = "y" -o \
-      "$CONFIG_CASIO_E55" = "y" -o \
-      "$CONFIG_DDB5074" = "y" -o \
-      "$CONFIG_DDB5476" = "y" -o \
-@@ -797,6 +813,7 @@
- bool 'Networking support' CONFIG_NET
- 
- if [ "$CONFIG_ACER_PICA_61" = "y" -o \
-+     "$CONFIG_AR7" = "y" -o \
-      "$CONFIG_CASIO_E55" = "y" -o \
-      "$CONFIG_DECSTATION" = "y" -o \
-      "$CONFIG_IBM_WORKPAD" = "y" -o \
-diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
---- linux.old/arch/mips/kernel/head.S	2005-10-21 16:43:16.396956500 +0200
-+++ linux.dev/arch/mips/kernel/head.S	2005-11-10 01:10:45.807572250 +0100
-@@ -75,11 +75,11 @@
- 		 * size!
- 		 */
- 		NESTED(except_vec4, 0, sp)
--		.set	push
--		.set	noreorder
--1:		j	1b			/* Dummy, will be replaced */
--		 nop
--		.set	pop
-+		.set	mips2
-+		lui     k0, 0x9400
-+		ori     k0, 0x200
-+		jr      k0
-+		nop
- 		END(except_vec4)
- 
- 		/*
-diff -urN linux.old/arch/mips/kernel/mips_ksyms.c linux.dev/arch/mips/kernel/mips_ksyms.c
---- linux.old/arch/mips/kernel/mips_ksyms.c	2004-02-18 14:36:30.000000000 +0100
-+++ linux.dev/arch/mips/kernel/mips_ksyms.c	2005-11-10 01:10:45.811572500 +0100
-@@ -40,6 +40,12 @@
- extern long __strnlen_user_nocheck_asm(const char *s);
- extern long __strnlen_user_asm(const char *s);
- 
-+#ifdef CONFIG_AR7
-+#include <asm/ar7/adam2_env.h>
-+int avalanche_request_pacing(int irq_nr, unsigned int blk_num, unsigned int pace_value);
-+#endif
-+
-+
- EXPORT_SYMBOL(mips_machtype);
- #ifdef CONFIG_EISA
- EXPORT_SYMBOL(EISA_bus);
-@@ -103,3 +109,10 @@
- #endif
- 
- EXPORT_SYMBOL(get_wchan);
-+
-+#ifdef CONFIG_AR7
-+EXPORT_SYMBOL_NOVERS(avalanche_request_pacing);
-+EXPORT_SYMBOL_NOVERS(prom_getenv);
-+EXPORT_SYMBOL_NOVERS(prom_iterenv);
-+#endif
-+
-diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c
---- linux.old/arch/mips/kernel/setup.c	2005-10-21 16:43:16.396956500 +0200
-+++ linux.dev/arch/mips/kernel/setup.c	2005-11-10 01:14:16.376732000 +0100
-@@ -38,6 +38,7 @@
- #include <asm/io.h>
- #include <asm/ptrace.h>
- #include <asm/system.h>
-+#include <asm/addrspace.h>
- 
- struct cpuinfo_mips cpu_data[NR_CPUS];
- EXPORT_SYMBOL(cpu_data);
-@@ -88,7 +89,7 @@
- struct boot_mem_map boot_mem_map;
- 
- unsigned char aux_device_present;
--extern char _ftext, _etext, _fdata, _edata, _end;
-+extern char _ftext, _etext, _fdata, _edata, _fbss, _end;
- 
- static char command_line[CL_SIZE];
-        char saved_command_line[CL_SIZE];
-@@ -116,6 +117,7 @@
- 
- static struct resource code_resource = { "Kernel code" };
- static struct resource data_resource = { "Kernel data" };
-+static struct resource  bss_resource = { "Kernel bss" };
- 
- asmlinkage void __init
- init_arch(int argc, char **argv, char **envp, int *prom_vec)
-@@ -272,7 +274,7 @@
- 	for (i = 0; i < boot_mem_map.nr_map; i++) {
- 		unsigned long start, end;
- 
--		if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
-+		if (boot_mem_map.map[i].type == BOOT_MEM_RESERVED)
- 			continue;
- 
- 		start = PFN_UP(boot_mem_map.map[i].addr);
-@@ -320,7 +322,8 @@
- #endif
- 
- 	/* Initialize the boot-time allocator with low memory only.  */
--	bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
-+	bootmap_size = init_bootmem_node(NODE_DATA(0), first_usable_pfn,
-+					 PFN_UP(PHYS_OFFSET), max_low_pfn);
- 
- 	/*
- 	 * Register fully available low RAM pages with the bootmem allocator.
-@@ -371,11 +374,12 @@
- 			continue;
- 
- 		/* Register lowmem ranges */
--		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
-+		free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn),
-+				  size<<PAGE_SHIFT);
- 	}
- 
- 	/* Reserve the bootmap memory.  */
--	reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
-+	reserve_bootmem_node(NODE_DATA(0), PFN_PHYS(first_usable_pfn), bootmap_size);
- 
- #ifdef CONFIG_BLK_DEV_INITRD
- 	/* Board specific code should have set up initrd_start and initrd_end */
-@@ -409,6 +413,8 @@
- 	code_resource.end = virt_to_bus(&_etext) - 1;
- 	data_resource.start = virt_to_bus(&_fdata);
- 	data_resource.end = virt_to_bus(&_edata) - 1;
-+	bss_resource.start = virt_to_bus(&_fbss);
-+	bss_resource.end = virt_to_bus(&_end) - 1;
- 
- 	/*
- 	 * Request address space for all standard RAM.
-@@ -448,6 +454,7 @@
- 		 */
- 		request_resource(res, &code_resource);
- 		request_resource(res, &data_resource);
-+		request_resource(res, &bss_resource);
- 	}
- }
- 
-@@ -494,6 +501,7 @@
- 	void hp_setup(void);
- 	void au1x00_setup(void);
- 	void frame_info_init(void);
-+ 	void ar7_setup(void);
- 
- 	frame_info_init();
- #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
-@@ -691,6 +699,11 @@
-                 pmc_yosemite_setup();
-                 break;
- #endif
-+#ifdef CONFIG_AR7
-+	case MACH_GROUP_UNKNOWN:
-+		ar7_setup();
-+		break;
-+#endif
- 	default:
- 		panic("Unsupported architecture");
- 	}
-diff -urN linux.old/arch/mips/kernel/time.c linux.dev/arch/mips/kernel/time.c
---- linux.old/arch/mips/kernel/time.c	2005-01-19 15:09:29.000000000 +0100
-+++ linux.dev/arch/mips/kernel/time.c	2005-11-10 01:12:43.950955750 +0100
-@@ -143,7 +143,6 @@
- 	expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
- 	write_c0_count(expirelo - cycles_per_jiffy);
- 	write_c0_compare(expirelo);
--	write_c0_count(count);
- }
- 
- int (*mips_timer_state)(void);
-diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c
---- linux.old/arch/mips/kernel/traps.c	2005-10-21 16:43:16.400956750 +0200
-+++ linux.dev/arch/mips/kernel/traps.c	2005-11-10 01:13:28.301727500 +0100
-@@ -869,9 +869,24 @@
- 
- 	exception_handlers[n] = handler;
- 	if (n == 0 && cpu_has_divec) {
-+	  printk(KERN_DEBUG "%s: using long jump via k0 to reach %08x\n",
-+		 __FUNCTION__, handler);
-+	  /* where does the 8 byte limit mentioned in head.S come from??? */
-+	  if (handler > 0x0fffffff) { /* maximum for single J instruction */
-+	    /* lui k0, 0x0000 */
-+	    *(volatile u32 *)(KSEG0+0x200) = 0x3c1a0000 | (handler >> 16);
-+	    /* ori k0, 0x0000 */
-+	    *(volatile u32 *)(KSEG0+0x204) = 0x375a0000 | (handler & 0xffff);
-+	    /* jr k0 */
-+	    *(volatile u32 *)(KSEG0+0x208) = 0x03400008;
-+	    /* nop */
-+	    *(volatile u32 *)(KSEG0+0x20C) = 0x00000000;
-+    	    flush_icache_range(KSEG0+0x200, KSEG0+0x210);
-+	  } else {
- 		*(volatile u32 *)(KSEG0+0x200) = 0x08000000 |
- 		                                 (0x03ffffff & (handler >> 2));
--		flush_icache_range(KSEG0+0x200, KSEG0 + 0x204);
-+		flush_icache_range(KSEG0+0x200, KSEG0+0x204);
-+	  }
- 	}
- 	return (void *)old_handler;
- }
-diff -urN linux.old/arch/mips/mm/init.c linux.dev/arch/mips/mm/init.c
---- linux.old/arch/mips/mm/init.c	2004-02-18 14:36:30.000000000 +0100
-+++ linux.dev/arch/mips/mm/init.c	2005-11-10 01:14:16.376732000 +0100
-@@ -235,10 +235,13 @@
- #endif
- }
- 
-+#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
-+#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
-+
- void __init paging_init(void)
- {
- 	unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
--	unsigned long max_dma, high, low;
-+	unsigned long max_dma, high, low, start;
- 
- 	pagetable_init();
- 
-@@ -247,7 +250,8 @@
- #endif
- 
- 	max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
--	low = max_low_pfn;
-+	start = START_PFN;
-+	low = MAX_LOW_PFN - start;
- 	high = highend_pfn;
- 
- #ifdef CONFIG_ISA
-@@ -270,7 +274,8 @@
- 		zones_size[ZONE_HIGHMEM] = high - low;
- #endif
- 
--	free_area_init(zones_size);
-+	free_area_init_node(0, NODE_DATA(0), 0, zones_size,
-+			    start << PAGE_SHIFT, 0);
- }
- 
- #define PFN_UP(x)	(((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
-@@ -283,7 +288,7 @@
- 	for (i = 0; i < boot_mem_map.nr_map; i++) {
- 		unsigned long addr, end;
- 
--		if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
-+		if (boot_mem_map.map[i].type == BOOT_MEM_RESERVED)
- 			/* not usable memory */
- 			continue;
- 
-@@ -313,16 +318,17 @@
- 	max_mapnr = num_physpages = highend_pfn;
- 	num_mappedpages = max_low_pfn;
- #else
--	max_mapnr = num_mappedpages = num_physpages = max_low_pfn;
-+	max_mapnr = num_mappedpages = num_physpages = MAX_LOW_PFN - START_PFN;
- #endif
--	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
--
--	totalram_pages += free_all_bootmem();
-+	
-+	high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE);
-+	
-+	totalram_pages += free_all_bootmem_node(NODE_DATA(0));
- 	totalram_pages -= setup_zero_pages();	/* Setup zeroed pages.  */
- 
- 	reservedpages = ram = 0;
--	for (tmp = 0; tmp < max_low_pfn; tmp++)
--		if (page_is_ram(tmp)) {
-+	for (tmp = 0; tmp < max_mapnr; tmp++)
-+		if (page_is_ram(START_PFN + tmp)) {
- 			ram++;
- 			if (PageReserved(mem_map+tmp))
- 				reservedpages++;
-@@ -377,13 +383,13 @@
- #endif
- 
- extern char __init_begin, __init_end;
--extern void prom_free_prom_memory(void) __init;
-+extern unsigned long prom_free_prom_memory(void) __init;
- 
- void free_initmem(void)
- {
- 	unsigned long addr;
- 
--	prom_free_prom_memory ();
-+	totalram_pages += prom_free_prom_memory ();
- 
- 	addr = (unsigned long) &__init_begin;
- 	while (addr < (unsigned long) &__init_end) {
-diff -urN linux.old/drivers/char/Config.in linux.dev/drivers/char/Config.in
---- linux.old/drivers/char/Config.in	2005-10-21 16:43:16.440959250 +0200
-+++ linux.dev/drivers/char/Config.in	2005-11-10 01:10:45.843574500 +0100
-@@ -188,6 +188,14 @@
-    tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL
- fi
- 
-+if [ "$CONFIG_AR7" = "y" ]; then  
-+   bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ
-+   dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ
-+                   
-+   define_int CONFIG_AR7_VLYNQ_PORTS 2 
-+   tristate 'ADAM2 environment support (read-only)' CONFIG_AR7_ADAM2
-+fi                                                                                             
-+
- source drivers/i2c/Config.in
- 
- mainmenu_option next_comment
-diff -urN linux.old/drivers/char/Config.in.orig linux.dev/drivers/char/Config.in.orig
---- linux.old/drivers/char/Config.in.orig	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/char/Config.in.orig	2005-11-10 01:10:45.863575750 +0100
-@@ -0,0 +1,414 @@
-+#
-+# Character device configuration
-+#
-+mainmenu_option next_comment
-+comment 'Character devices'
-+
-+bool 'Virtual terminal' CONFIG_VT
-+if [ "$CONFIG_VT" = "y" ]; then
-+   bool '  Support for console on virtual terminal' CONFIG_VT_CONSOLE
-+   if [ "$CONFIG_GSC_LASI" = "y" ]; then
-+      bool '    Support for Lasi/Dino PS2 port' CONFIG_GSC_PS2
-+   fi
-+fi
-+tristate 'Standard/generic (8250/16550 and compatible UARTs) serial support' CONFIG_SERIAL
-+if [ "$CONFIG_SERIAL" = "y" ]; then
-+   bool '  Support for console on serial port' CONFIG_SERIAL_CONSOLE
-+   if [ "$CONFIG_GSC_LASI" = "y" ]; then
-+      bool '   serial port on GSC support' CONFIG_SERIAL_GSC
-+   fi
-+   if [ "$CONFIG_IA64" = "y" ]; then
-+      bool '  Support for serial port described by EFI HCDP table' CONFIG_SERIAL_HCDP
-+   fi
-+   if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
-+      tristate '   Atomwide serial port support' CONFIG_ATOMWIDE_SERIAL
-+      tristate '   Dual serial port support' CONFIG_DUALSP_SERIAL
-+   fi
-+fi
-+dep_mbool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED $CONFIG_SERIAL
-+if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then
-+   bool '  Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS
-+   bool '  Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ
-+   bool '  Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_DETECT_IRQ
-+   bool '  Support special multiport boards' CONFIG_SERIAL_MULTIPORT
-+   bool '  Support the Bell Technologies HUB6 card' CONFIG_HUB6
-+fi
-+bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD
-+if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then
-+   tristate '  Computone IntelliPort Plus serial support' CONFIG_COMPUTONE
-+   tristate '  Comtrol Rocketport support' CONFIG_ROCKETPORT
-+   tristate '  Cyclades async mux support' CONFIG_CYCLADES
-+   if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then
-+      bool '    Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR
-+   fi
-+   if [ "$CONFIG_X86_64" != "y" ]; then
-+      tristate '  Digiboard Intelligent Async Support' CONFIG_DIGIEPCA
-+      if [ "$CONFIG_DIGIEPCA" = "n" ]; then
-+         tristate '  Digiboard PC/Xx Support' CONFIG_DIGI
-+      fi
-+   fi
-+   dep_tristate '  Hayes ESP serial port support' CONFIG_ESPSERIAL $CONFIG_ISA
-+   tristate '  Moxa Intellio support' CONFIG_MOXA_INTELLIO
-+   tristate '  Moxa SmartIO support' CONFIG_MOXA_SMARTIO
-+   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-+      dep_tristate '  Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m
-+   fi
-+   tristate '  Microgate SyncLink card support' CONFIG_SYNCLINK
-+   tristate '  SyncLink Multiport support' CONFIG_SYNCLINKMP
-+   tristate '  HDLC line discipline support' CONFIG_N_HDLC
-+   tristate '  SDL RISCom/8 card support' CONFIG_RISCOM8
-+   if [ "$CONFIG_X86_64" != "y" ]; then
-+      tristate '  Specialix IO8+ card support' CONFIG_SPECIALIX
-+      if [ "$CONFIG_SPECIALIX" != "n" ]; then
-+         bool '  Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS
-+      fi 
-+      tristate '  Specialix SX (and SI) card support' CONFIG_SX
-+      tristate '  Specialix RIO system support' CONFIG_RIO
-+      if [ "$CONFIG_RIO" != "n" ]; then
-+        bool '    Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI
-+      fi
-+   fi
-+   bool '  Stallion multiport serial support' CONFIG_STALDRV
-+   if [ "$CONFIG_STALDRV" = "y" ]; then
-+     tristate '    Stallion EasyIO or EC8/32 support' CONFIG_STALLION
-+     tristate '    Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
-+   fi
-+   if [ "$CONFIG_PARISC" = "y" ]; then
-+     if [ "$CONFIG_PDC_CONSOLE" != "y" ]; then
-+       bool '  Serial MUX support' CONFIG_SERIAL_MUX CONFIG_SERIAL_NONSTANDARD
-+     fi
-+     if [ "$CONFIG_SERIAL_MUX" != "y" ]; then
-+       bool '  PDC software console support' CONFIG_PDC_CONSOLE CONFIG_SERIAL_NONSTANDARD
-+     fi
-+   fi
-+   if [ "$CONFIG_MIPS" = "y" ]; then
-+      bool '  TX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912
-+      dep_bool '     Console on TX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912
-+      bool '  TMPTX39XX/49XX serial port support' CONFIG_SERIAL_TXX9
-+      dep_bool '     Console on TMPTX39XX/49XX serial port' CONFIG_SERIAL_TXX9_CONSOLE $CONFIG_SERIAL_TXX9
-+      if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
-+	 bool '  Enable Au1x00 UART Support' CONFIG_AU1X00_UART
-+	 if [ "$CONFIG_AU1X00_UART" = "y" ]; then
-+	    bool '        Enable Au1x00 serial console' CONFIG_AU1X00_SERIAL_CONSOLE
-+         fi
-+         dep_tristate '  Au1x00 USB TTY Device support' CONFIG_AU1X00_USB_TTY $CONFIG_SOC_AU1X00
-+	    if [ "$CONFIG_AU1000_USB_TTY" != "y" ]; then
-+	       dep_tristate '  Au1x00 USB Raw Device support' CONFIG_AU1X00_USB_RAW $CONFIG_SOC_AU1X00
-+	    fi
-+	    if [ "$CONFIG_AU1X00_USB_TTY" != "n" -o \
-+	         "$CONFIG_AU1X00_USB_RAW" != "n" ]; then
-+		 define_bool CONFIG_AU1X00_USB_DEVICE y
-+	    fi
-+      fi
-+      bool '  TXx927 SIO support' CONFIG_TXX927_SERIAL 
-+      if [ "$CONFIG_TXX927_SERIAL" = "y" ]; then
-+         bool '    TXx927 SIO Console support' CONFIG_TXX927_SERIAL_CONSOLE  
-+      fi                             
-+      if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
-+         bool '  Support for BCM1xxx onchip DUART' CONFIG_SIBYTE_SB1250_DUART
-+         if [ "$CONFIG_SIBYTE_SB1250_DUART" = "y" ]; then
-+            bool '    Console on BCM1xxx DUART' CONFIG_SIBYTE_SB1250_DUART_CONSOLE
-+            if [ "$CONFIG_SIBYTE_SB1250_DUART_CONSOLE" = "y" ]; then
-+               define_bool CONFIG_SERIAL_CONSOLE y
-+            fi
-+         fi
-+      fi
-+   fi
-+   if [ "$CONFIG_DECSTATION" = "y" ]; then
-+      bool '  DECstation serial support' CONFIG_SERIAL_DEC
-+      dep_bool '    Support for console on a DECstation serial port' CONFIG_SERIAL_DEC_CONSOLE $CONFIG_SERIAL_DEC
-+      dep_bool '    DZ11 serial support' CONFIG_DZ $CONFIG_SERIAL_DEC $CONFIG_MIPS32
-+      dep_bool '    Z85C30 serial support' CONFIG_ZS $CONFIG_SERIAL_DEC $CONFIG_TC
-+   fi
-+   if [ "$CONFIG_SGI_IP22" = "y" ]; then
-+      bool '  SGI Zilog85C30 serial support' CONFIG_IP22_SERIAL
-+   fi
-+   if [ "$CONFIG_IA64" = "y" ]; then
-+      bool '  SGI SN2 l1 serial port support' CONFIG_SGI_L1_SERIAL
-+      if [ "$CONFIG_SGI_L1_SERIAL" = "y" ]; then
-+	 bool '    SGI SN2 l1 Console support' CONFIG_SGI_L1_SERIAL_CONSOLE
-+      fi
-+      if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ]; then
-+	 bool '  SGI SN2 IOC4 serial port support' CONFIG_SGI_IOC4_SERIAL
-+      fi
-+   fi
-+fi
-+if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then
-+   tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
-+fi
-+if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
-+   bool 'DC21285 serial port support' CONFIG_SERIAL_21285
-+   if [ "$CONFIG_SERIAL_21285" = "y" ]; then
-+      if [ "$CONFIG_OBSOLETE" = "y" ]; then
-+         bool '  Use /dev/ttyS0 device (OBSOLETE)' CONFIG_SERIAL_21285_OLD
-+      fi
-+      bool '  Console on DC21285 serial port' CONFIG_SERIAL_21285_CONSOLE
-+   fi
-+   if [ "$CONFIG_PARISC" = "y" ]; then
-+     bool '  PDC software console support' CONFIG_PDC_CONSOLE
-+   fi
-+fi
-+if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
-+   bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
-+   if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
-+     define_bool CONFIG_IT8172_CIR y
-+   else
-+     bool '    Enable PS2 Keyboard Support' CONFIG_PC_KEYB
-+   fi
-+   bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
-+   bool 'Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1
-+fi
-+if [ "$CONFIG_MIPS_IVR" = "y" ]; then
-+   bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
-+   if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
-+     define_bool CONFIG_IT8172_CIR y
-+   fi
-+   bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
-+fi
-+if [ "$CONFIG_CPU_VR41XX" = "y" ]; then
-+   bool 'NEC VR4100 series Keyboard Interface Unit Support ' CONFIG_VR41XX_KIU
-+fi
-+bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
-+if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
-+   int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
-+fi
-+if [ "$CONFIG_PARPORT" != "n" ]; then
-+   dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
-+   if [ "$CONFIG_PRINTER" != "n" ]; then
-+      bool '  Support for console on line printer' CONFIG_LP_CONSOLE
-+   fi
-+   dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT
-+   dep_tristate 'Texas Instruments parallel link cable support' CONFIG_TIPAR $CONFIG_PARPORT
-+fi
-+
-+if [ "$CONFIG_PPC64" = "y" ] ; then 
-+   bool 'pSeries Hypervisor Virtual Console support' CONFIG_HVC_CONSOLE
-+fi
-+if [ "$CONFIG_ALL_PPC" = "y" ]; then
-+   tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL
-+fi
-+
-+if [ "$CONFIG_AR7" = "y" ]; then  
-+   bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ
-+   dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ
-+                   
-+   define_int CONFIG_AR7_VLYNQ_PORTS 2 
-+fi                                                                                             
-+
-+source drivers/i2c/Config.in
-+
-+mainmenu_option next_comment
-+comment 'Mice'
-+tristate 'Bus Mouse Support' CONFIG_BUSMOUSE
-+if [ "$CONFIG_BUSMOUSE" != "n" ]; then
-+   dep_tristate '  ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE
-+   dep_tristate '  Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE
-+   dep_tristate '  Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE
-+   if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then
-+      dep_tristate '  Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE
-+   fi
-+#   if [ "$CONFIG_DECSTATION" = "y" ]; then
-+#      dep_bool '  MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE $CONFIG_ACCESSBUS
-+#   fi
-+fi
-+
-+tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE
-+if [ "$CONFIG_MOUSE" != "n" ]; then
-+   bool '  PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
-+   tristate '  C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE
-+   tristate '  PC110 digitizer pad support' CONFIG_PC110_PAD
-+   tristate '  MK712 touch screen support' CONFIG_MK712_MOUSE
-+fi
-+endmenu
-+
-+source drivers/char/joystick/Config.in
-+
-+tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE
-+if [ "$CONFIG_QIC02_TAPE" != "n" ]; then
-+   bool '  Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF
-+   if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
-+      comment '  Edit configuration parameters in ./include/linux/tpqic02.h!'
-+   else
-+      comment '  Setting runtime QIC-02 configuration is done with qic02conf'
-+      comment '  from the tpqic02-support package.  It is available at'
-+      comment '  metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/'
-+   fi
-+fi
-+
-+tristate 'IPMI top-level message handler' CONFIG_IPMI_HANDLER
-+dep_mbool '  Generate a panic event to all BMCs on a panic' CONFIG_IPMI_PANIC_EVENT $CONFIG_IPMI_HANDLER
-+dep_tristate '  Device interface for IPMI' CONFIG_IPMI_DEVICE_INTERFACE $CONFIG_IPMI_HANDLER
-+dep_tristate '  IPMI KCS handler' CONFIG_IPMI_KCS $CONFIG_IPMI_HANDLER
-+dep_tristate '  IPMI Watchdog Timer' CONFIG_IPMI_WATCHDOG $CONFIG_IPMI_HANDLER
-+
-+mainmenu_option next_comment
-+comment 'Watchdog Cards'
-+bool 'Watchdog Timer Support'	CONFIG_WATCHDOG
-+if [ "$CONFIG_WATCHDOG" != "n" ]; then
-+   bool '  Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
-+   tristate '  Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
-+   tristate '  Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT
-+   tristate '  ALi M7101 PMU on ALi 1535D+ Watchdog Timer' CONFIG_ALIM1535_WDT
-+   tristate '  ALi M7101 PMU Watchdog Timer' CONFIG_ALIM7101_WDT
-+   tristate '  AMD "Elan" SC520 Watchdog Timer' CONFIG_SC520_WDT
-+   tristate '  Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG
-+   if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
-+      tristate '  DC21285 watchdog' CONFIG_21285_WATCHDOG
-+      if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
-+         tristate '  NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG
-+      fi
-+   fi
-+   tristate '  Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT
-+   tristate '  IB700 SBC Watchdog Timer' CONFIG_IB700_WDT
-+   tristate '  ICP ELectronics Wafer 5823 Watchdog' CONFIG_WAFER_WDT
-+   tristate '  Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO
-+   tristate '  Mixcom Watchdog' CONFIG_MIXCOMWD 
-+   tristate '  SBC-60XX Watchdog Timer' CONFIG_60XX_WDT
-+   dep_tristate '  SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL
-+   tristate '  NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT
-+   tristate '  Software Watchdog' CONFIG_SOFT_WATCHDOG
-+   tristate '  W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT
-+   tristate '  WDT Watchdog timer' CONFIG_WDT
-+   tristate '  WDT PCI Watchdog timer' CONFIG_WDTPCI
-+   if [ "$CONFIG_WDT" != "n" ]; then
-+      bool '    WDT501 features' CONFIG_WDT_501
-+      if [ "$CONFIG_WDT_501" = "y" ]; then
-+         bool '      Fan Tachometer' CONFIG_WDT_501_FAN
-+      fi
-+   fi
-+   tristate '  ZF MachZ Watchdog' CONFIG_MACHZ_WDT
-+   if [ "$CONFIG_SGI_IP22" = "y" ]; then
-+      dep_tristate '  Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
-+   fi
-+   if [ "$CONFIG_8xx" = "y" ]; then
-+      tristate '  MPC8xx Watchdog Timer' CONFIG_8xx_WDT
-+   fi
-+fi
-+endmenu
-+
-+if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
-+   tristate 'NetWinder thermometer support' CONFIG_DS1620
-+   tristate 'NetWinder Button' CONFIG_NWBUTTON
-+   if [ "$CONFIG_NWBUTTON" != "n" ]; then
-+      bool '  Reboot Using Button' CONFIG_NWBUTTON_REBOOT
-+   fi
-+   tristate 'NetWinder flash support' CONFIG_NWFLASH
-+fi
-+tristate 'NatSemi SCx200 Support' CONFIG_SCx200
-+dep_tristate '  NatSemi SCx200 GPIO Support' CONFIG_SCx200_GPIO $CONFIG_SCx200
-+
-+if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ] ; then
-+   bool 'SGI SN2 fetchop support' CONFIG_FETCHOP
-+fi
-+
-+if [ "$CONFIG_X86" = "y" -o "$CONFIG_X86_64" = "y" ]; then
-+   dep_tristate 'AMD 768/8111 Random Number Generator support' CONFIG_AMD_RNG $CONFIG_PCI
-+fi
-+if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
-+   dep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCI
-+fi
-+if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o \
-+     "$CONFIG_X86_64" = "y" ]; then
-+   dep_tristate 'Intel/AMD/VIA HW Random Number Generator support' CONFIG_HW_RANDOM $CONFIG_PCI
-+fi
-+dep_tristate 'AMD 76x native power management (Experimental)' CONFIG_AMD_PM768 $CONFIG_PCI
-+tristate '/dev/nvram support' CONFIG_NVRAM
-+tristate 'Enhanced Real Time Clock Support' CONFIG_RTC
-+if [ "$CONFIG_IA64" = "y" ]; then
-+   bool 'EFI Real Time Clock Services' CONFIG_EFI_RTC
-+fi
-+if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then
-+   bool 'Tadpole ANA H8 Support (OBSOLETE)'  CONFIG_H8
-+fi
-+if [ "$CONFIG_SGI_IP22" = "y" ]; then
-+   tristate 'Dallas DS1286 RTC support' CONFIG_DS1286
-+fi
-+if [ "$CONFIG_SGI_IP27" = "y" ]; then
-+   tristate 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC
-+fi
-+if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
-+   tristate 'Dallas DS1742 RTC support' CONFIG_DS1742
-+fi
-+
-+tristate 'Double Talk PC internal speech card support' CONFIG_DTLK
-+tristate 'Siemens R3964 line discipline' CONFIG_R3964
-+tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOM
-+if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_X86" = "y" -a "$CONFIG_X86_64" != "y" ]; then
-+   dep_tristate 'Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)' CONFIG_SONYPI $CONFIG_PCI
-+fi
-+
-+mainmenu_option next_comment
-+comment 'Ftape, the floppy tape device driver'
-+tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPE
-+if [ "$CONFIG_FTAPE" != "n" ]; then
-+   source drivers/char/ftape/Config.in
-+fi
-+
-+endmenu
-+
-+if [ "$CONFIG_GART_IOMMU" = "y" ]; then
-+	bool '/dev/agpgart (AGP Support)' CONFIG_AGP
-+	define_bool CONFIG_AGP_AMD_K8 y
-+else
-+	tristate '/dev/agpgart (AGP Support)' CONFIG_AGP
-+fi      
-+if [ "$CONFIG_AGP" != "n" ]; then
-+   bool '  Intel 440LX/BX/GX and I815/I820/I830M/I830MP/I840/I845/I850/I860 support' CONFIG_AGP_INTEL
-+   bool '  Intel I810/I815/I830M (on-board) support' CONFIG_AGP_I810
-+   bool '  VIA chipset support' CONFIG_AGP_VIA
-+   bool '  AMD Irongate, 761, and 762 support' CONFIG_AGP_AMD
-+   if [ "$CONFIG_GART_IOMMU" != "y" ]; then
-+      bool '  AMD Opteron/Athlon64 on-CPU GART support' CONFIG_AGP_AMD_K8
-+   fi   
-+   bool '  Generic SiS support' CONFIG_AGP_SIS
-+   bool '  ALI chipset support' CONFIG_AGP_ALI
-+   bool '  Serverworks LE/HE support' CONFIG_AGP_SWORKS
-+   if [ "$CONFIG_X86" = "y" ]; then
-+      bool '  NVIDIA chipset support' CONFIG_AGP_NVIDIA
-+   fi
-+   if [ "$CONFIG_IA64" = "y" ]; then
-+      bool '  Intel 460GX support' CONFIG_AGP_I460
-+      bool '  HP ZX1 AGP support' CONFIG_AGP_HP_ZX1
-+   fi
-+   bool '  ATI IGP chipset support' CONFIG_AGP_ATI
-+fi
-+
-+mainmenu_option next_comment
-+comment 'Direct Rendering Manager (XFree86 DRI support)'
-+bool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRM
-+if [ "$CONFIG_DRM" = "y" ]; then
-+   bool '  Build drivers for old (XFree 4.0) DRM' CONFIG_DRM_OLD
-+   if [ "$CONFIG_DRM_OLD" = "y" ]; then
-+      comment 'DRM 4.0 drivers'
-+      source drivers/char/drm-4.0/Config.in
-+   else
-+      comment 'DRM 4.1 drivers'
-+      define_bool CONFIG_DRM_NEW y
-+      source drivers/char/drm/Config.in
-+   fi
-+fi
-+
-+if [ "$CONFIG_X86" = "y" ]; then
-+   tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
-+fi
-+
-+endmenu
-+
-+if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then
-+   source drivers/char/pcmcia/Config.in
-+fi
-+if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
-+   tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO
-+   tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846
-+   #tristate ' Alchemy Au1550 PSC SPI support' CONFIG_AU1550_PSC_SPI
-+fi
-+if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
-+  tristate ' ITE GPIO' CONFIG_ITE_GPIO
-+fi
-+
-+if [ "$CONFIG_X86" = "y" ]; then
-+   tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
-+   dep_tristate 'HP OB600 C/CT Pop-up mouse support' CONFIG_OBMOUSE $CONFIG_INPUT_MOUSEDEV
-+fi
-+
-+endmenu
-diff -urN linux.old/drivers/char/Makefile linux.dev/drivers/char/Makefile
---- linux.old/drivers/char/Makefile	2005-10-21 16:43:16.460960500 +0200
-+++ linux.dev/drivers/char/Makefile	2005-11-10 01:10:45.871576250 +0100
-@@ -240,6 +240,13 @@
- obj-y += joystick/js.o
- endif
- 
-+#
-+# Texas Intruments VLYNQ driver
-+# 
-+
-+subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq
-+obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o                                                        
-+
- obj-$(CONFIG_FETCHOP) += fetchop.o
- obj-$(CONFIG_BUSMOUSE) += busmouse.o
- obj-$(CONFIG_DTLK) += dtlk.o
-@@ -340,6 +347,11 @@
-   obj-y += ipmi/ipmi.o
- endif
- 
-+subdir-$(CONFIG_AR7_ADAM2) += ticfg
-+ifeq ($(CONFIG_AR7_ADAM2),y)
-+  obj-y += ticfg/ticfg.o
-+endif
-+
- include $(TOPDIR)/Rules.make
- 
- fastdep:
-diff -urN linux.old/drivers/char/Makefile.orig linux.dev/drivers/char/Makefile.orig
---- linux.old/drivers/char/Makefile.orig	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/char/Makefile.orig	2005-11-10 01:10:45.871576250 +0100
-@@ -0,0 +1,374 @@
-+#
-+# Makefile for the kernel character device drivers.
-+#
-+# Note! Dependencies are done automagically by 'make dep', which also
-+# removes any old dependencies. DON'T put your own dependencies here
-+# unless it's something special (ie not a .c file).
-+#
-+# Note 2! The CFLAGS definitions are now inherited from the
-+# parent makes..
-+#
-+
-+#
-+# This file contains the font map for the default (hardware) font
-+#
-+FONTMAPFILE = cp437.uni
-+
-+O_TARGET := char.o
-+
-+obj-y	 += mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o random.o
-+
-+# All of the (potential) objects that export symbols.
-+# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-+
-+export-objs     :=	busmouse.o console.o keyboard.o sysrq.o \
-+			misc.o pty.o random.o selection.o serial.o \
-+			sonypi.o tty_io.o tty_ioctl.o generic_serial.o \
-+			au1000_gpio.o vac-serial.o hp_psaux.o nvram.o \
-+			scx200.o fetchop.o
-+
-+mod-subdirs	:=	joystick ftape drm drm-4.0 pcmcia
-+
-+list-multi	:=	
-+
-+KEYMAP   =defkeymap.o
-+KEYBD    =pc_keyb.o
-+CONSOLE  =console.o
-+SERIAL   =serial.o
-+
-+ifeq ($(ARCH),s390)
-+  KEYMAP   =
-+  KEYBD    =
-+  CONSOLE  =
-+  SERIAL   =
-+endif
-+
-+ifeq ($(ARCH),mips)
-+  ifneq ($(CONFIG_PC_KEYB),y)
-+    KEYBD    =
-+  endif
-+  ifeq ($(CONFIG_VR41XX_KIU),y)
-+    ifeq ($(CONFIG_IBM_WORKPAD),y)
-+      KEYMAP = ibm_workpad_keymap.o
-+    endif
-+    ifeq ($(CONFIG_VICTOR_MPC30X),y)
-+      KEYMAP = victor_mpc30x_keymap.o
-+    endif
-+    KEYBD    = vr41xx_keyb.o
-+  endif
-+endif
-+
-+ifeq ($(ARCH),s390x)
-+  KEYMAP   =
-+  KEYBD    =
-+  CONSOLE  =
-+  SERIAL   =
-+endif
-+
-+ifeq ($(ARCH),m68k)
-+   ifdef CONFIG_AMIGA
-+      KEYBD = amikeyb.o
-+   else
-+      ifndef CONFIG_MAC
-+	 KEYBD =
-+      endif
-+   endif
-+   SERIAL   =
-+endif
-+
-+ifeq ($(ARCH),parisc)
-+   ifdef CONFIG_GSC_PS2
-+      KEYBD   = hp_psaux.o hp_keyb.o
-+   else
-+      KEYBD   =
-+   endif
-+   ifdef CONFIG_SERIAL_MUX
-+      CONSOLE += mux.o
-+   endif
-+   ifdef CONFIG_PDC_CONSOLE
-+      CONSOLE += pdc_console.o
-+   endif
-+endif
-+
-+ifdef CONFIG_Q40
-+  KEYBD += q40_keyb.o
-+  SERIAL = serial.o
-+endif
-+
-+ifdef CONFIG_APOLLO
-+  KEYBD += dn_keyb.o
-+endif
-+
-+ifeq ($(ARCH),parisc)
-+   ifdef CONFIG_GSC_PS2
-+      KEYBD   = hp_psaux.o hp_keyb.o
-+   else
-+      KEYBD   =
-+   endif
-+   ifdef CONFIG_PDC_CONSOLE
-+      CONSOLE += pdc_console.o
-+   endif
-+endif
-+
-+ifeq ($(ARCH),arm)
-+  ifneq ($(CONFIG_PC_KEYMAP),y)
-+    KEYMAP   =
-+  endif
-+  ifneq ($(CONFIG_PC_KEYB),y)
-+    KEYBD    =
-+  endif
-+endif
-+
-+ifeq ($(ARCH),sh)
-+  KEYMAP   =
-+  KEYBD    =
-+  CONSOLE  =
-+  ifeq ($(CONFIG_SH_HP600),y)
-+  KEYMAP   = defkeymap.o
-+  KEYBD    = scan_keyb.o hp600_keyb.o
-+  CONSOLE  = console.o
-+  endif
-+  ifeq ($(CONFIG_SH_DMIDA),y)
-+  # DMIDA does not connect the HD64465 PS/2 keyboard port
-+  # but we allow for USB keyboards to be plugged in.
-+  KEYMAP   = defkeymap.o
-+  KEYBD    = # hd64465_keyb.o pc_keyb.o
-+  CONSOLE  = console.o
-+  endif
-+  ifeq ($(CONFIG_SH_EC3104),y)
-+  KEYMAP   = defkeymap.o
-+  KEYBD    = ec3104_keyb.o
-+  CONSOLE  = console.o
-+  endif
-+  ifeq ($(CONFIG_SH_DREAMCAST),y)
-+  KEYMAP   = defkeymap.o
-+  KEYBD    =
-+  CONSOLE  = console.o
-+  endif
-+endif
-+
-+ifeq ($(CONFIG_DECSTATION),y)
-+  KEYMAP   =
-+  KEYBD    =
-+endif
-+
-+ifeq ($(CONFIG_BAGET_MIPS),y)
-+  KEYBD    =
-+  SERIAL   = vac-serial.o
-+endif
-+
-+ifeq ($(CONFIG_NINO),y)
-+  SERIAL   =
-+endif
-+
-+ifneq ($(CONFIG_SUN_SERIAL),)
-+  SERIAL   =
-+endif
-+
-+ifeq ($(CONFIG_QTRONIX_KEYBOARD),y)
-+  KEYBD    = qtronix.o
-+  KEYMAP   = qtronixmap.o
-+endif
-+
-+ifeq ($(CONFIG_DUMMY_KEYB),y)
-+  KEYBD = dummy_keyb.o
-+endif
-+
-+obj-$(CONFIG_VT) += vt.o vc_screen.o consolemap.o consolemap_deftbl.o $(CONSOLE) selection.o
-+obj-$(CONFIG_SERIAL) += $(SERIAL)
-+obj-$(CONFIG_PARPORT_SERIAL) += parport_serial.o
-+obj-$(CONFIG_SERIAL_HCDP) += hcdp_serial.o
-+obj-$(CONFIG_SERIAL_21285) += serial_21285.o
-+obj-$(CONFIG_SERIAL_SA1100) += serial_sa1100.o
-+obj-$(CONFIG_SERIAL_AMBA) += serial_amba.o
-+obj-$(CONFIG_TS_AU1X00_ADS7846) += au1000_ts.o
-+obj-$(CONFIG_SERIAL_DEC) += decserial.o
-+
-+ifndef CONFIG_SUN_KEYBOARD
-+  obj-$(CONFIG_VT) += keyboard.o $(KEYMAP) $(KEYBD)
-+else
-+  obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP)
-+endif
-+
-+obj-$(CONFIG_HIL) += hp_keyb.o
-+obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
-+obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
-+obj-$(CONFIG_ROCKETPORT) += rocket.o
-+obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
-+obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
-+obj-$(CONFIG_DIGI) += pcxx.o
-+obj-$(CONFIG_DIGIEPCA) += epca.o
-+obj-$(CONFIG_CYCLADES) += cyclades.o
-+obj-$(CONFIG_STALLION) += stallion.o
-+obj-$(CONFIG_ISTALLION) += istallion.o
-+obj-$(CONFIG_SIBYTE_SB1250_DUART) += sb1250_duart.o
-+obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o
-+obj-$(CONFIG_RISCOM8) += riscom8.o
-+obj-$(CONFIG_ISI) += isicom.o
-+obj-$(CONFIG_ESPSERIAL) += esp.o
-+obj-$(CONFIG_SYNCLINK) += synclink.o
-+obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
-+obj-$(CONFIG_N_HDLC) += n_hdlc.o
-+obj-$(CONFIG_SPECIALIX) += specialix.o
-+obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
-+obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
-+obj-$(CONFIG_SX) += sx.o generic_serial.o
-+obj-$(CONFIG_RIO) += rio/rio.o generic_serial.o
-+obj-$(CONFIG_SH_SCI) += sh-sci.o generic_serial.o
-+obj-$(CONFIG_SERIAL167) += serial167.o
-+obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
-+obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
-+obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
-+obj-$(CONFIG_HVC_CONSOLE) += hvc_console.o
-+obj-$(CONFIG_SERIAL_TX3912) += generic_serial.o serial_tx3912.o
-+obj-$(CONFIG_TXX927_SERIAL) += serial_txx927.o
-+obj-$(CONFIG_SERIAL_TXX9) += generic_serial.o serial_txx9.o
-+obj-$(CONFIG_IP22_SERIAL) += sgiserial.o
-+obj-$(CONFIG_AU1X00_UART) += au1x00-serial.o
-+obj-$(CONFIG_SGI_L1_SERIAL) += sn_serial.o
-+
-+subdir-$(CONFIG_RIO) += rio
-+subdir-$(CONFIG_INPUT) += joystick
-+
-+obj-$(CONFIG_ATIXL_BUSMOUSE) += atixlmouse.o
-+obj-$(CONFIG_LOGIBUSMOUSE) += logibusmouse.o
-+obj-$(CONFIG_PRINTER) += lp.o
-+obj-$(CONFIG_TIPAR) += tipar.o
-+obj-$(CONFIG_OBMOUSE) += obmouse.o
-+
-+ifeq ($(CONFIG_INPUT),y)
-+obj-y += joystick/js.o
-+endif
-+
-+#
-+# Texas Intruments VLYNQ driver
-+# 
-+
-+subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq
-+obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o                                                        
-+
-+obj-$(CONFIG_FETCHOP) += fetchop.o
-+obj-$(CONFIG_BUSMOUSE) += busmouse.o
-+obj-$(CONFIG_DTLK) += dtlk.o
-+obj-$(CONFIG_R3964) += n_r3964.o
-+obj-$(CONFIG_APPLICOM) += applicom.o
-+obj-$(CONFIG_SONYPI) += sonypi.o
-+obj-$(CONFIG_MS_BUSMOUSE) += msbusmouse.o
-+obj-$(CONFIG_82C710_MOUSE) += qpmouse.o
-+obj-$(CONFIG_AMIGAMOUSE) += amigamouse.o
-+obj-$(CONFIG_ATARIMOUSE) += atarimouse.o
-+obj-$(CONFIG_ADBMOUSE) += adbmouse.o
-+obj-$(CONFIG_PC110_PAD) += pc110pad.o
-+obj-$(CONFIG_MK712_MOUSE) += mk712.o
-+obj-$(CONFIG_RTC) += rtc.o
-+obj-$(CONFIG_GEN_RTC) += genrtc.o
-+obj-$(CONFIG_EFI_RTC) += efirtc.o
-+obj-$(CONFIG_MIPS_RTC) += mips_rtc.o
-+obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
-+ifeq ($(CONFIG_PPC),)
-+  obj-$(CONFIG_NVRAM) += nvram.o
-+endif
-+obj-$(CONFIG_TOSHIBA) += toshiba.o
-+obj-$(CONFIG_I8K) += i8k.o
-+obj-$(CONFIG_DS1286) += ds1286.o
-+obj-$(CONFIG_DS1620) += ds1620.o
-+obj-$(CONFIG_DS1742) += ds1742.o
-+obj-$(CONFIG_INTEL_RNG) += i810_rng.o
-+obj-$(CONFIG_AMD_RNG) += amd768_rng.o
-+obj-$(CONFIG_HW_RANDOM) += hw_random.o
-+obj-$(CONFIG_AMD_PM768) += amd76x_pm.o
-+obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o
-+
-+obj-$(CONFIG_ITE_GPIO) += ite_gpio.o
-+obj-$(CONFIG_AU1X00_GPIO) += au1000_gpio.o
-+obj-$(CONFIG_AU1550_PSC_SPI) += au1550_psc_spi.o
-+obj-$(CONFIG_AU1X00_USB_TTY) += au1000_usbtty.o
-+obj-$(CONFIG_AU1X00_USB_RAW) += au1000_usbraw.o
-+obj-$(CONFIG_COBALT_LCD) += lcd.o
-+
-+obj-$(CONFIG_QIC02_TAPE) += tpqic02.o
-+
-+subdir-$(CONFIG_FTAPE) += ftape
-+subdir-$(CONFIG_DRM_OLD) += drm-4.0
-+subdir-$(CONFIG_DRM_NEW) += drm
-+subdir-$(CONFIG_PCMCIA) += pcmcia
-+subdir-$(CONFIG_AGP) += agp
-+
-+ifeq ($(CONFIG_FTAPE),y)
-+obj-y       += ftape/ftape.o
-+endif
-+
-+obj-$(CONFIG_H8) += h8.o
-+obj-$(CONFIG_PPDEV) += ppdev.o
-+obj-$(CONFIG_DZ) += dz.o
-+obj-$(CONFIG_NWBUTTON) += nwbutton.o
-+obj-$(CONFIG_NWFLASH) += nwflash.o
-+obj-$(CONFIG_SCx200) += scx200.o
-+obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
-+
-+# Only one watchdog can succeed. We probe the hardware watchdog
-+# drivers first, then the softdog driver.  This means if your hardware
-+# watchdog dies or is 'borrowed' for some reason the software watchdog
-+# still gives you some cover.
-+
-+obj-$(CONFIG_PCWATCHDOG) += pcwd.o
-+obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
-+obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
-+obj-$(CONFIG_IB700_WDT) += ib700wdt.o
-+obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
-+obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
-+obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
-+obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
-+obj-$(CONFIG_WDT) += wdt.o
-+obj-$(CONFIG_WDTPCI) += wdt_pci.o
-+obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
-+obj-$(CONFIG_977_WATCHDOG) += wdt977.o
-+obj-$(CONFIG_I810_TCO) += i810-tco.o
-+obj-$(CONFIG_MACHZ_WDT) += machzwd.o
-+obj-$(CONFIG_SH_WDT) += shwdt.o
-+obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
-+obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
-+obj-$(CONFIG_ALIM1535_WDT) += alim1535d_wdt.o
-+obj-$(CONFIG_INDYDOG) += indydog.o
-+obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
-+obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
-+obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
-+obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
-+obj-$(CONFIG_INDYDOG) += indydog.o
-+obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
-+
-+subdir-$(CONFIG_MWAVE) += mwave
-+ifeq ($(CONFIG_MWAVE),y)
-+  obj-y += mwave/mwave.o
-+endif
-+
-+subdir-$(CONFIG_IPMI_HANDLER) += ipmi
-+ifeq ($(CONFIG_IPMI_HANDLER),y)
-+  obj-y += ipmi/ipmi.o
-+endif
-+
-+include $(TOPDIR)/Rules.make
-+
-+fastdep:
-+
-+conmakehash: conmakehash.c
-+	$(HOSTCC) $(HOSTCFLAGS) -o conmakehash conmakehash.c
-+
-+consolemap_deftbl.c: $(FONTMAPFILE) conmakehash
-+	./conmakehash $(FONTMAPFILE) > consolemap_deftbl.c
-+
-+consolemap_deftbl.o: consolemap_deftbl.c $(TOPDIR)/include/linux/types.h
-+
-+.DELETE_ON_ERROR:
-+
-+defkeymap.c: defkeymap.map
-+	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
-+
-+qtronixmap.c: qtronixmap.map
-+	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
-+
-+ibm_workpad_keymap.c: ibm_workpad_keymap.map
-+	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
-+
-+victor_mpc30x_keymap.c: victor_mpc30x_keymap.map
-+	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
-diff -urN linux.old/drivers/char/avalanche_vlynq/Makefile linux.dev/drivers/char/avalanche_vlynq/Makefile
---- linux.old/drivers/char/avalanche_vlynq/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/char/avalanche_vlynq/Makefile	2005-11-10 01:10:45.871576250 +0100
-@@ -0,0 +1,16 @@
-+#
-+# Makefile for the linux kernel.
-+#
-+# Note! Dependencies are done automagically by 'make dep', which also
-+# removes any old dependencies. DON'T put your own dependencies here
-+# unless it's something special (ie not a .c file).
-+#
-+# Note 2! The CFLAGS definitions are now in the main makefile...
-+
-+O_TARGET := avalanche_vlynq.o
-+
-+export-objs := vlynq_board.o
-+
-+obj-y    +=  vlynq_drv.o  vlynq_hal.o  vlynq_board.o
-+
-+include $(TOPDIR)/Rules.make
-diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_board.c linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c
---- linux.old/drivers/char/avalanche_vlynq/vlynq_board.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c	2005-11-10 01:10:45.871576250 +0100
-@@ -0,0 +1,184 @@
-+/*
-+ * Jeff Harrell, jharrell@ti.com
-+ * Copyright (C) 2001 Texas Instruments, Inc.  All rights reserved.
-+ *
-+ *  This program is free software; you can distribute it and/or modify it
-+ *  under the terms of the GNU General Public License (Version 2) as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  This program is distributed in the hope it will be useful, but WITHOUT
-+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ *  for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License along
-+ *  with this program; if not, write to the Free Software Foundation, Inc.,
-+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * Texas Instruments Sangam specific setup.
-+ */
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <asm/ar7/sangam.h>  
-+#include <asm/ar7/avalanche_misc.h>  
-+#include <asm/ar7/vlynq.h>  
-+   
-+#define SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR	30 	/* MSB - 1 bit */
-+#define SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR	31 	/* MSB bit */
-+#define SYS_VLYNQ_OPTIONS 		        0x7F; 	/* all options*/
-+
-+/* These defines are board specific */
-+
-+
-+#define VLYNQ0_REMOTE_WINDOW1_OFFSET           (0x0C000000)
-+#define VLYNQ0_REMOTE_WINDOW1_SIZE             (0x500)
-+
-+
-+#define VLYNQ1_REMOTE_WINDOW1_OFFSET           (0x0C000000)
-+#define VLYNQ1_REMOTE_WINDOW1_SIZE             (0x500)
-+
-+
-+extern VLYNQ_DEV vlynqDevice0, vlynqDevice1;
-+int    vlynq_init_status[2] = {0, 0};
-+EXPORT_SYMBOL(vlynq_init_status);
-+static int reset_hack = 1;
-+
-+void vlynq_ar7wrd_dev_init()
-+{
-+    *(unsigned long*) AVALANCHE_GPIO_ENBL    |= (1<<18);
-+    vlynq_delay(20000);
-+    *(unsigned long*) AVALANCHE_GPIO_DIR     &= ~(1<<18);
-+    vlynq_delay(20000);
-+    *(unsigned long*) AVALANCHE_GPIO_DATA_OUT&= ~(1<<18);
-+    vlynq_delay(50000);
-+    *(unsigned long*) AVALANCHE_GPIO_DATA_OUT|=  (1<<18);
-+    vlynq_delay(50000);
-+
-+    /* Initialize the MIPS host vlynq driver for a given vlynq interface */
-+    vlynqDevice0.dev_idx = 0;			/* first vlynq module - this parameter is for reference only */
-+    vlynqDevice0.module_base = AVALANCHE_LOW_VLYNQ_CONTROL_BASE; 	/*  vlynq0 module base address */
-+
-+#if defined(CONFIG_VLYNQ_CLK_LOCAL)
-+    vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_LOCAL;   
-+#else
-+    vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_REMOTE;   
-+#endif
-+    vlynqDevice0.clk_div = 0x01; 			/* board/hardware specific */
-+    vlynqDevice0.state =  VLYNQ_DRV_STATE_UNINIT; 	/* uninitialized module */
-+
-+    /* Populate vlynqDevice0.local_mem & Vlynq0.remote_mem based on system configuration */ 
-+    /*Local memory configuration */
-+
-+                /* Demiurg : not good !*/
-+#if 0
-+    vlynqDevice0.local_mem.Txmap= AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE & ~(0xc0000000) ; /* physical address */
-+    vlynqDevice0.remote_mem.RxOffset[0]= VLYNQ0_REMOTE_WINDOW1_OFFSET; /* This is specific to the board on the other end */
-+    vlynqDevice0.remote_mem.RxSize[0]=VLYNQ0_REMOTE_WINDOW1_SIZE;
-+#endif
-+
-+                /* Demiurg : This is how it should be ! */
-+                vlynqDevice0.local_mem.Txmap = PHYSADDR(AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE);
-+#define VLYNQ_ACX111_MEM_OFFSET     0xC0000000  /* Physical address of ACX111 memory */
-+#define VLYNQ_ACX111_MEM_SIZE       0x00040000  /* Total size of the ACX111 memory   */
-+#define VLYNQ_ACX111_REG_OFFSET     0xF0000000  /* PHYS_ADDR of ACX111 control registers   */
-+#define VLYNQ_ACX111_REG_SIZE       0x00022000  /* Size of ACX111 registers area, MAC+PHY  */
-+#define ACX111_VL1_REMOTE_SIZE 0x1000000
-+                vlynqDevice0.remote_mem.RxOffset[0]  =  VLYNQ_ACX111_MEM_OFFSET;
-+                vlynqDevice0.remote_mem.RxSize[0]    =  VLYNQ_ACX111_MEM_SIZE  ;
-+                vlynqDevice0.remote_mem.RxOffset[1]  =  VLYNQ_ACX111_REG_OFFSET;
-+                vlynqDevice0.remote_mem.RxSize[1]    =  VLYNQ_ACX111_REG_SIZE  ;
-+                vlynqDevice0.remote_mem.Txmap        =  0;
-+                vlynqDevice0.local_mem.RxOffset[0]   =  AVALANCHE_SDRAM_BASE;
-+                vlynqDevice0.local_mem.RxSize[0]     =  ACX111_VL1_REMOTE_SIZE;
-+
-+
-+    /* Local interrupt configuration */
-+    vlynqDevice0.local_irq.intLocal = VLYNQ_INT_LOCAL; 	/* Host handles vlynq interrupts*/
-+    vlynqDevice0.local_irq.intRemote = VLYNQ_INT_ROOT_ISR;  	/* vlynq root isr used */
-+    vlynqDevice0.local_irq.map_vector = SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR;
-+    vlynqDevice0.local_irq.intr_ptr = 0; /* Since remote interrupts part of vlynq root isr this is unused */
-+
-+    /* Remote interrupt configuration */
-+    vlynqDevice0.remote_irq.intLocal = VLYNQ_INT_REMOTE; 	/* MIPS handles interrupts */
-+    vlynqDevice0.remote_irq.intRemote = VLYNQ_INT_ROOT_ISR;  	/* Not significant since MIPS handles interrupts */
-+    vlynqDevice0.remote_irq.map_vector = SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR;
-+    vlynqDevice0. remote_irq.intr_ptr = AVALANCHE_INTC_BASE; /* Not significant since MIPS handles interrupts */
-+
-+     if(reset_hack != 1)
-+       printk("About to re-init the VLYNQ.\n");
-+
-+    if(vlynq_init(&vlynqDevice0,VLYNQ_INIT_PERFORM_ALL)== 0)
-+    {
-+        /* Suraj added the following to keep the 1130 going. */
-+        vlynq_interrupt_vector_set(&vlynqDevice0, 0 /* intr vector line running into 1130 vlynq */,
-+                                   0 /* intr mapped onto the interrupt register on remote vlynq and this vlynq */,
-+                                   VLYNQ_REMOTE_DVC, 0 /* polarity active high */, 0 /* interrupt Level triggered */);
-+
-+        /* System wide interrupt is 80 for 1130, please note. */
-+        vlynq_init_status[0] = 1;
-+        reset_hack = 2;
-+    }
-+    else
-+    {
-+        if(reset_hack == 1)
-+            printk("VLYNQ INIT FAILED: Please try cold reboot. \n");
-+        else
-+            printk("Failed to initialize the VLYNQ interface at insmod.\n");
-+
-+    }
-+}
-+
-+void  vlynq_dev_init(void)
-+{
-+    volatile unsigned int *reset_base = (unsigned int *) AVALANCHE_RESET_CONTROL_BASE;
-+
-+    *reset_base &= ~((1 << AVALANCHE_LOW_VLYNQ_RESET_BIT)); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT)); */
-+
-+    vlynq_delay(20000);
-+
-+    /* Bring vlynq out of reset if not already done */
-+    *reset_base |= (1 << AVALANCHE_LOW_VLYNQ_RESET_BIT); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT); */
-+    vlynq_delay(20000); /* Allowing sufficient time to VLYNQ to settle down.*/
-+
-+    vlynq_ar7wrd_dev_init( );
-+
-+}
-+
-+/* This function is board specific and should be ported for each board. */
-+void remote_vlynq_dev_reset_ctrl(unsigned int module_reset_bit,
-+                                 AVALANCHE_RESET_CTRL_T reset_ctrl)
-+{
-+    if(module_reset_bit >= 32)
-+        return;
-+
-+    switch(module_reset_bit)
-+    {
-+        case 0:
-+            if(OUT_OF_RESET == reset_ctrl)
-+            {
-+                if(reset_hack) return;
-+
-+                vlynq_delay(20000);
-+                printk("Un-resetting the remote device.\n");
-+                vlynq_dev_init();
-+                printk("Re-initialized the VLYNQ.\n");
-+                reset_hack = 2;
-+            }
-+            else if(IN_RESET == reset_ctrl)
-+            {
-+                *(unsigned long*) AVALANCHE_GPIO_DATA_OUT &= ~(1<<18);
-+
-+                vlynq_delay(20000);
-+                printk("Resetting the remote device.\n");
-+                reset_hack = 0;
-+            }
-+            else
-+                ;
-+        break;
-+
-+        default:
-+        break;
-+
-+    }
-+}
-+
-diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c
---- linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c	2005-11-10 01:10:45.891577500 +0100
-@@ -0,0 +1,243 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    Vlynq Linux Device Driver Source
-+ ******************************************************************************
-+ * FILE NAME:       vlynq_drv.c
-+ *
-+ * DESCRIPTION:     Vlynq Linux Device Driver Source
-+ *
-+ * REVISION HISTORY:
-+ *
-+ * Date           Description                       Author
-+ *-----------------------------------------------------------------------------
-+ * 17 July 2003   Initial Creation                  Anant Gole
-+ * 17 Dec  2003   Updates                           Sharath Kumar
-+ *
-+ * (C) Copyright 2003, Texas Instruments, Inc
-+ *******************************************************************************/
-+ 
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/miscdevice.h>
-+#include <linux/smp_lock.h>
-+#include <linux/delay.h>
-+#include <linux/proc_fs.h>
-+#include <linux/capability.h>
-+#include <asm/ar7/avalanche_intc.h>
-+#include <asm/ar7/sangam.h>
-+#include <asm/ar7/vlynq.h>
-+
-+
-+#define    TI_VLYNQ_VERSION                 "0.2"
-+
-+/* debug on ? */
-+#define VLYNQ_DEBUG 
-+
-+/* Macro for debug and error printf's */
-+#ifdef VLYNQ_DEBUG
-+#define DBGPRINT  printk
-+#else
-+#define DBGPRINT(x)  
-+#endif
-+
-+#define ERRPRINT  printk
-+
-+/* Define the max vlynq ports this driver will support. 
-+   Device name strings are statically added here */
-+#define MAX_VLYNQ_PORTS 2
-+
-+
-+/* Type define for VLYNQ private structure */
-+typedef struct vlynqPriv{
-+    int irq;
-+    VLYNQ_DEV *vlynqDevice;
-+}VLYNQ_PRIV;
-+
-+extern int vlynq_init_status[2];
-+
-+/* Extern Global variable for vlynq devices used in initialization of the vlynq device
-+ * These variables need to be populated/initialized by the system as part of initialization
-+ * process. The vlynq enumerator can run at initialization and populate these globals
-+ */
-+
-+VLYNQ_DEV vlynqDevice0;
-+VLYNQ_DEV vlynqDevice1;
-+
-+/* Defining dummy macro AVALANCHE_HIGH_VLYNQ_INT to take
-+ * care of compilation in case of single vlynq device 
-+ */
-+
-+#ifndef AVALANCHE_HIGH_VLYNQ_INT
-+#define  AVALANCHE_HIGH_VLYNQ_INT 0
-+#endif
-+
-+
-+
-+/* vlynq private object */
-+VLYNQ_PRIV vlynq_priv[CONFIG_AR7_VLYNQ_PORTS] = {
-+    { LNXINTNUM(AVALANCHE_LOW_VLYNQ_INT),&vlynqDevice0},
-+    { LNXINTNUM(AVALANCHE_HIGH_VLYNQ_INT),&vlynqDevice1},
-+};
-+
-+extern void vlynq_dev_init(void);
-+
-+
-+/* =================================== all the operations */
-+
-+static int
-+vlynq_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+    return 0;
-+}
-+
-+static struct file_operations vlynq_fops = {
-+    owner:      THIS_MODULE,
-+    ioctl:      vlynq_ioctl,
-+};
-+
-+/* Vlynq device object */
-+static struct miscdevice vlynq_dev [MAX_VLYNQ_PORTS] = {
-+    { MISC_DYNAMIC_MINOR , "vlynq0", &vlynq_fops },
-+    { MISC_DYNAMIC_MINOR , "vlynq1", &vlynq_fops },
-+};
-+
-+
-+/* Proc read function */
-+static int
-+vlynq_read_link_proc(char *buf, char **start, off_t offset, int count, int *eof, void *unused)
-+{
-+    int instance;
-+    int len = 0;
-+ 
-+    len += sprintf(buf +len,"VLYNQ Devices : %d\n",CONFIG_AR7_VLYNQ_PORTS);
-+
-+    for(instance =0;instance < CONFIG_AR7_VLYNQ_PORTS;instance++)
-+    {
-+        int link_state;
-+        char *link_msg[] = {" DOWN "," UP "};
-+       
-+        if(vlynq_init_status[instance] == 0)
-+            link_state = 0; 
-+
-+        else if (vlynq_link_check(vlynq_priv[instance].vlynqDevice))
-+            link_state = 1;
-+
-+        else
-+            link_state = 0;    
-+
-+        len += sprintf(buf + len, "VLYNQ %d: Link state: %s\n",instance,link_msg[link_state]);
-+
-+    }
-+    /* Print info about vlynq device 1 */
-+   
-+    return len;
-+}
-+
-+
-+/* Proc function to display driver version */                                                                       
-+static int                                                                                     
-+vlynq_read_ver_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data)        
-+{                                                                                              
-+	int instance;                                                                              
-+	int len=0;                                                                                 
-+                                                                                               
-+	len += sprintf(buf +len,"\nTI Linux VLYNQ Driver Version %s\n",TI_VLYNQ_VERSION);         
-+	return len;                                                                                
-+}                                                                                              
-+
-+
-+
-+
-+/* Wrapper for vlynq ISR */
-+static void lnx_vlynq_root_isr(int irq, void * arg, struct pt_regs *regs)
-+{
-+   vlynq_root_isr(arg);
-+}
-+
-+/* =================================== init and cleanup */
-+
-+int vlynq_init_module(void)
-+{
-+    int ret;
-+    int unit = 0;
-+    int instance_count = CONFIG_AR7_VLYNQ_PORTS;
-+    volatile int *ptr;
-+
-+    vlynq_dev_init();
-+
-+    DBGPRINT("Vlynq CONFIG_AR7_VLYNQ_PORTS=%d\n", CONFIG_AR7_VLYNQ_PORTS);
-+    /* If num of configured vlynq ports > supported by driver return error */
-+    if (instance_count > MAX_VLYNQ_PORTS)
-+    {
-+        ERRPRINT("ERROR: vlynq_init_module(): Max %d supported\n", MAX_VLYNQ_PORTS);
-+        return (-1);
-+    }
-+
-+    /* register the misc device */
-+    for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++)
-+    {
-+        ret = misc_register(&vlynq_dev[unit]);
-+
-+        if(ret < 0)
-+        {
-+            ERRPRINT("ERROR:Could not register vlynq device:%d\n",unit);
-+            continue;
-+        }
-+        else 
-+            DBGPRINT("Vlynq Device %s registered with minor no %d as misc device. Result=%d\n", 
-+                vlynq_dev[unit].name, vlynq_dev[unit].minor, ret);
-+#if 0
-+            
-+        DBGPRINT("Calling vlynq init\n");
-+
-+        /* Read the global variable for VLYNQ device structure and initialize vlynq driver */
-+        ret = vlynq_init(vlynq_priv[unit].vlynqDevice,VLYNQ_INIT_PERFORM_ALL );
-+#endif
-+
-+        if(vlynq_init_status[unit] == 0)
-+        {
-+            printk("VLYNQ %d : init failed\n",unit); 
-+            continue;
-+        }
-+         
-+        /* Check link before proceeding */
-+        if (!vlynq_link_check(vlynq_priv[unit].vlynqDevice))
-+        {
-+ 	    DBGPRINT("\nError: Vlynq link not available.trying once before  Exiting");
-+        }
-+        else
-+        {
-+            DBGPRINT("Vlynq instance:%d Link UP\n",unit);
-+        
-+            /* Install the vlynq local root ISR */
-+           request_irq(vlynq_priv[unit].irq,lnx_vlynq_root_isr,0,vlynq_dev[unit].name,vlynq_priv[unit].vlynqDevice);
-+        } 
-+    }
-+
-+    proc_mkdir("avalanche", NULL);
-+    /* Creating proc entry for the devices */
-+    create_proc_read_entry("avalanche/vlynq_link", 0, NULL, vlynq_read_link_proc, NULL);
-+    create_proc_read_entry("avalanche/vlynq_ver", 0, NULL, vlynq_read_ver_proc, NULL);
-+  
-+    return 0;
-+}
-+
-+void vlynq_cleanup_module(void)
-+{
-+    int unit = 0;
-+    
-+    for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++)
-+    {
-+        DBGPRINT("vlynq_cleanup_module(): Unregistring misc device %s\n",vlynq_dev[unit].name);
-+        misc_deregister(&vlynq_dev[unit]);
-+    }
-+
-+    remove_proc_entry("avalanche/vlynq_link", NULL);
-+    remove_proc_entry("avalanche/vlynq_ver", NULL);
-+}
-+
-+
-+module_init(vlynq_init_module);
-+module_exit(vlynq_cleanup_module);
-+
-diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c
---- linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c	2005-11-10 01:10:45.975582750 +0100
-@@ -0,0 +1,1214 @@
-+/***************************************************************************
-+**+----------------------------------------------------------------------+**
-+**|                                ****                                  |**
-+**|                                ****                                  |**
-+**|                                ******o***                            |**
-+**|                          ********_///_****                           |**
-+**|                           ***** /_//_/ ****                          |**
-+**|                            ** ** (__/ ****                           |**
-+**|                                *********                             |**
-+**|                                 ****                                 |**
-+**|                                  ***                                 |**
-+**|                                                                      |**
-+**|     Copyright (c) 2003 Texas Instruments Incorporated                |**
-+**|                        ALL RIGHTS RESERVED                           |**
-+**|                                                                      |**
-+**| Permission is hereby granted to licensees of Texas Instruments       |**
-+**| Incorporated (TI) products to use this computer program for the sole |**
-+**| purpose of implementing a licensee product based on TI products.     |**
-+**| No other rights to reproduce, use, or disseminate this computer      |**
-+**| program, whether in part or in whole, are granted.                   |**
-+**|                                                                      |**
-+**| TI makes no representation or warranties with respect to the         |**
-+**| performance of this computer program, and specifically disclaims     |**
-+**| any responsibility for any damages, special or consequential,        |**
-+**| connected with the use of this program.                              |**
-+**|                                                                      |**
-+**+----------------------------------------------------------------------+**
-+***************************************************************************/
-+
-+/***************************************************************************
-+ *  ------------------------------------------------------------------------------
-+ *   Module      : vlynq_hal.c
-+ *   Description : This file implements VLYNQ HAL API.
-+ *  ------------------------------------------------------------------------------
-+ ***************************************************************************/
-+
-+#include <linux/stddef.h>
-+#include <linux/types.h>
-+#include <asm/ar7/vlynq.h>
-+
-+/**** Local Function prototypes *******/
-+static int vlynqInterruptInit(VLYNQ_DEV *pdev);
-+static void  vlynq_configClock(VLYNQ_DEV  *pdev);
-+
-+/*** Second argument must be explicitly type casted to 
-+ * (VLYNQ_DEV*) inside the following functions */
-+static void vlynq_local_module_isr(void *arg1, void *arg2, void *arg3);
-+static void vlynq_remote_module_isr(void *arg1, void *arg2, void *arg3);
-+
-+
-+volatile int vlynq_delay_value = 0;
-+
-+/* Code adopted from original vlynq driver */
-+void vlynq_delay(unsigned int clktime)
-+{
-+    int i = 0;
-+    volatile int    *ptr = &vlynq_delay_value;
-+    *ptr = 0;
-+
-+    /* We are assuming that the each cycle takes about 
-+     * 23 assembly instructions. */
-+    for(i = 0; i < (clktime + 23)/23; i++)
-+    {
-+        *ptr = *ptr + 1;
-+    }
-+}
-+
-+
-+/* ----------------------------------------------------------------------------
-+ *  Function : vlynq_configClock()
-+ *  Description: Configures clock settings based on input parameters
-+ *  Adapted from original vlyna driver from Cable
-+ */
-+static void vlynq_configClock(VLYNQ_DEV * pdev)
-+{
-+    unsigned int tmp;
-+
-+    switch( pdev->clk_source)
-+    {
-+        case VLYNQ_CLK_SOURCE_LOCAL:  /* we output the clock, clk_div in range [1..8]. */
-+            tmp = ((pdev->clk_div - 1) << 16) |  VLYNQ_CTL_CLKDIR_MASK ;
-+            VLYNQ_CTRL_REG = tmp;
-+            VLYNQ_R_CTRL_REG = 0ul;
-+            break;
-+        case VLYNQ_CLK_SOURCE_REMOTE: /* we need to set the clock pin as input */
-+            VLYNQ_CTRL_REG = 0ul;
-+            tmp = ((pdev->clk_div - 1) << 16) |  VLYNQ_CTL_CLKDIR_MASK ;
-+            VLYNQ_R_CTRL_REG = tmp;
-+            break;
-+        default:   /* do nothing about the clock, but clear other bits. */
-+            tmp = ~(VLYNQ_CTL_CLKDIR_MASK | VLYNQ_CTL_CLKDIV_MASK);
-+            VLYNQ_CTRL_REG &= tmp;
-+            break;
-+   }
-+}
-+
-+ /* ----------------------------------------------------------------------------
-+ *  Function : vlynq_link_check()
-+ *  Description: This function checks the current VLYNQ for a link.
-+ *  An arbitrary amount of time is allowed for the link to come up .
-+ *  Returns 0 for "no link / failure " and 1 for "link available".
-+ * -----------------------------------------------------------------------------
-+ */
-+unsigned int vlynq_link_check( VLYNQ_DEV * pdev)
-+{
-+    /*sleep for 64 cycles, allow link to come up*/
-+    vlynq_delay(64);  
-+      
-+    /* check status register return OK if link is found. */
-+    if (VLYNQ_STATUS_REG & VLYNQ_STS_LINK_MASK) 
-+    {
-+        return 1;   /* Link Available */
-+    }
-+    else
-+    {
-+        return 0;   /* Link Failure */
-+    }
-+}
-+
-+/* ----------------------------------------------------------------------------
-+ *  Function : vlynq_init()
-+ *  Description: Initialization function accepting paramaters for VLYNQ module
-+ *  initialization. The Options bitmap decides what operations are performed
-+ *  as a part of initialization. The Input parameters  are obtained through the
-+ *  sub fields of VLYNQ_DEV structure.
-+ */
-+
-+int vlynq_init(VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options)
-+{
-+    unsigned int map;
-+    unsigned int val=0,cnt,tmp;
-+    unsigned int counter=0;
-+    VLYNQ_INTERRUPT_CNTRL *intSetting=NULL;
-+
-+    /* validate arguments */
-+    if( VLYNQ_OUTRANGE(pdev->clk_source, VLYNQ_CLK_SOURCE_REMOTE, VLYNQ_CLK_SOURCE_NONE) || 
-+        VLYNQ_OUTRANGE(pdev->clk_div, 8, 1) )
-+    {
-+      return VLYNQ_INVALID_ARG;
-+    }
-+   
-+    /** perform all sanity checks first **/
-+    if(pdev->state != VLYNQ_DRV_STATE_UNINIT)
-+        return VLYNQ_INVALID_DRV_STATE;
-+
-+    /** Initialize local and remote register set addresses- additional
-+     * provision to access the registers directly if need be */
-+    pdev->local = (VLYNQ_REG_SET*)pdev->module_base;
-+    pdev->remote = (VLYNQ_REG_SET*) (pdev->module_base + VLYNQ_REMOTE_REGS_OFFSET);
-+
-+    /* Detect faulty int configuration that might induce int pkt looping */
-+    if ( (options  & VLYNQ_INIT_LOCAL_INTERRUPTS) && (options & VLYNQ_INIT_REMOTE_INTERRUPTS) )
-+    {
-+        /* case when both local and remote are configured */
-+        if((pdev->local_irq.intLocal== VLYNQ_INT_REMOTE )  /* interrupts transfered to remote from local */
-+        && (pdev->remote_irq.intLocal== VLYNQ_INT_REMOTE)  /* interrupts transfered from remote to local */
-+        && ((pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) || (pdev->remote_irq.intRemote == VLYNQ_INT_ROOT_ISR)) )
-+        {
-+            return (VLYNQ_INT_CONFIG_ERR); 
-+        }
-+    }
-+
-+    pdev->state = VLYNQ_DRV_STATE_ININIT;
-+    pdev->intCount = 0;
-+    pdev->isrCount = 0;
-+
-+    /*** Its assumed that the vlynq module  has been brought out of reset
-+     * before invocation of vlynq_init. Since, this operation is board specific
-+     * it must be handled outside this generic driver */
-+   
-+    /* Assert reset the remote device, call reset_cb,
-+     * reset CB holds Reset according to the device needs. */
-+    VLYNQ_RESETCB(VLYNQ_RESET_ASSERT);
-+
-+    /* Handle VLYNQ clock, HW default (Sense On Reset) is
-+     * usually input for all the devices. */        
-+    if (options & VLYNQ_INIT_CONFIG_CLOCK)
-+    {
-+        vlynq_configClock(pdev);
-+    }
-+ 
-+    /* Call reset_cb again. It will release the remote device 
-+     * from reset, and wait for a while. */
-+    VLYNQ_RESETCB(VLYNQ_RESET_DEASSERT);
-+
-+    if(options & VLYNQ_INIT_CHECK_LINK )
-+    {
-+        /* Check for link up during initialization*/
-+	while( counter < 25 )
-+	{
-+	/* loop around giving a chance for link status to settle down */
-+	counter++;
-+        if(vlynq_link_check(pdev))
-+        {
-+           /* Link is up exit loop*/
-+	   break;
-+        }
-+
-+	vlynq_delay(4000);
-+	}/*end of while counter loop */
-+
-+        if(!vlynq_link_check(pdev))
-+        {
-+            /* Handle this case as abort */
-+            pdev->state = VLYNQ_DRV_STATE_ERROR;
-+            VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL);
-+            return VLYNQ_LINK_DOWN;
-+        }/* end of if not vlynq_link_check conditional block */
-+      
-+    }/*end of if options & VLYNQ_INIT_CHECK_LINK conditional block */
-+
-+
-+    if (options & VLYNQ_INIT_LOCAL_MEM_REGIONS)
-+    {
-+        /* Initialise local memory regions . This initialization lets
-+         * the local host access remote device memory regions*/   
-+        int i; 
-+
-+        /* configure the VLYNQ portal window to a PHYSICAL
-+         * address of the local CPU */
-+        VLYNQ_ALIGN4(pdev->local_mem.Txmap);
-+        VLYNQ_TXMAP_REG = (pdev->local_mem.Txmap); 
-+        
-+        /*This code assumes input parameter is itself a physical address */
-+        for(i=0; i < VLYNQ_MAX_MEMORY_REGIONS ; i++)
-+        {
-+            /* Physical address on the remote */
-+            map = i+1;
-+            VLYNQ_R_RXMAP_SIZE_REG(map) =  0;
-+            if( pdev->remote_mem.RxSize[i])
-+            {
-+                VLYNQ_ALIGN4(pdev->remote_mem.RxOffset[i]);            
-+                VLYNQ_ALIGN4(pdev->remote_mem.RxSize[i]);
-+                VLYNQ_R_RXMAP_OFFSET_REG(map) = pdev->remote_mem.RxOffset[i];
-+                VLYNQ_R_RXMAP_SIZE_REG(map) = pdev->remote_mem.RxSize[i];
-+            }
-+        }
-+    }
-+
-+    if(options & VLYNQ_INIT_REMOTE_MEM_REGIONS )
-+    {
-+        int i;
-+
-+        /* Initialise remote memory regions. This initialization lets remote
-+         * device access local host memory regions. It configures the VLYNQ portal
-+         * window to a PHYSICAL address of the remote */
-+        VLYNQ_ALIGN4(pdev->remote_mem.Txmap);            
-+        VLYNQ_R_TXMAP_REG = pdev->remote_mem.Txmap;
-+       
-+        for( i=0; i<VLYNQ_MAX_MEMORY_REGIONS; i++)
-+        {
-+            /* Physical address on the local */
-+            map = i+1;
-+            VLYNQ_RXMAP_SIZE_REG(map) =  0;
-+            if( pdev->local_mem.RxSize[i])
-+            {
-+                VLYNQ_ALIGN4(pdev->local_mem.RxOffset[i]);            
-+                VLYNQ_ALIGN4(pdev->local_mem.RxSize[i]);
-+                VLYNQ_RXMAP_OFFSET_REG(map) =  (pdev->local_mem.RxOffset[i]);
-+                VLYNQ_RXMAP_SIZE_REG(map) =  (pdev->local_mem.RxSize[i]);
-+            }
-+        }
-+    }
-+
-+    /* Adapted from original vlynq driver from cable - Calculate VLYNQ bus width */
-+    pdev->width = 3 +  VLYNQ_STATUS_FLD_WIDTH(VLYNQ_STATUS_REG) 
-+                  + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_R_STATUS_REG);
-+   
-+    /* chance to initialize the device, e.g. to boost VLYNQ 
-+     * clock by modifying pdev->clk_div or and verify the width. */
-+    VLYNQ_RESETCB(VLYNQ_RESET_LINKESTABLISH);
-+
-+    /* Handle VLYNQ clock, HW default (Sense On Reset) is
-+     * usually input for all the devices. */
-+    if(options & VLYNQ_INIT_CONFIG_CLOCK )
-+    {
-+        vlynq_configClock(pdev);
-+    }
-+
-+    /* last check for link*/
-+    if(options & VLYNQ_INIT_CHECK_LINK )
-+    {
-+     /* Final Check for link during initialization*/
-+	while( counter < 25 )
-+	{
-+	/* loop around giving a chance for link status to settle down */
-+	counter++;
-+        if(vlynq_link_check(pdev))
-+        {
-+           /* Link is up exit loop*/
-+	   break;
-+        }
-+
-+	vlynq_delay(4000);
-+	}/*end of while counter loop */
-+
-+        if(!vlynq_link_check(pdev))
-+        {
-+            /* Handle this case as abort */
-+            pdev->state = VLYNQ_DRV_STATE_ERROR;
-+            VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL);
-+            return VLYNQ_LINK_DOWN;
-+        }/* end of if not vlynq_link_check conditional block */
-+        
-+    } /* end of if options & VLYNQ_INIT_CHECK_LINK */
-+
-+    if(options & VLYNQ_INIT_LOCAL_INTERRUPTS )
-+    {
-+        /* Configure local interrupt settings */
-+        intSetting = &(pdev->local_irq);
-+
-+        /* Map local module status interrupts to interrupt vector*/
-+        val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ;
-+      
-+        /* enable local module status interrupts */
-+        val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT;
-+      
-+        if ( intSetting->intLocal == VLYNQ_INT_LOCAL )
-+        {
-+            /*set the intLocal bit*/
-+            val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT;
-+        }
-+      
-+        /* Irrespective of whether interrupts are handled locally, program
-+         * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1
-+         * i.e remote packets are set intPending register->which will result in 
-+         * same packet being sent out) has been done already
-+         */
-+      
-+        if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR) 
-+        {
-+            /* Set the int2Cfg register, so that remote interrupt
-+             * packets are written to intPending register */
-+            val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT;
-+    
-+            /* Set intPtr register to point to intPending register */
-+            VLYNQ_INT_PTR_REG = VLYNQ_INT_PENDING_REG_PTR ;
-+        }
-+        else
-+        {
-+            /*set the interrupt pointer register*/
-+            VLYNQ_INT_PTR_REG = intSetting->intr_ptr;
-+            /* Dont bother to modify int2Cfg as it would be zero */
-+        }
-+
-+        /** Clear bits related to INT settings in control register **/
-+        VLYNQ_CTRL_REG = VLYNQ_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK);
-+      
-+        /** Or the bits to be set with Control register **/
-+        VLYNQ_CTRL_REG = VLYNQ_CTRL_REG | val;
-+
-+        /* initialise local ICB */          
-+        if(vlynqInterruptInit(pdev)==VLYNQ_MEMALLOC_FAIL)
-+            return VLYNQ_MEMALLOC_FAIL;   
-+
-+        /* Install handler for local module status interrupts. By default when 
-+         * local interrupt setting is initialised, the local module status are 
-+         * enabled and handler hooked up */
-+        if(vlynq_install_isr(pdev, intSetting->map_vector, vlynq_local_module_isr, 
-+                             pdev, NULL, NULL) == VLYNQ_INVALID_ARG)
-+            return VLYNQ_INVALID_ARG;
-+    } /* end of init local interrupts */
-+
-+    if(options & VLYNQ_INIT_REMOTE_INTERRUPTS )
-+    {
-+        /* Configure remote interrupt settings from configuration */          
-+        intSetting = &(pdev->remote_irq);
-+
-+        /* Map remote module status interrupts to remote interrupt vector*/
-+        val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ;
-+        /* enable remote module status interrupts */
-+        val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT;
-+      
-+        if ( intSetting->intLocal == VLYNQ_INT_LOCAL )
-+        {
-+            /*set the intLocal bit*/
-+            val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT;
-+        }
-+
-+        /* Irrespective of whether interrupts are handled locally, program
-+         * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1
-+         * i.e remote packets are set intPending register->which will result in 
-+         * same packet being sent out) has been done already
-+        */ 
-+
-+        if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR) 
-+        {
-+            /* Set the int2Cfg register, so that remote interrupt
-+             * packets are written to intPending register */
-+            val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT;
-+            /* Set intPtr register to point to intPending register */
-+            VLYNQ_R_INT_PTR_REG = VLYNQ_R_INT_PENDING_REG_PTR ;
-+        }
-+        else
-+        {
-+            /*set the interrupt pointer register*/
-+            VLYNQ_R_INT_PTR_REG = intSetting->intr_ptr;
-+            /* Dont bother to modify int2Cfg as it would be zero */
-+        }
-+    
-+        if( (intSetting->intLocal == VLYNQ_INT_REMOTE) && 
-+            (options & VLYNQ_INIT_LOCAL_INTERRUPTS) &&
-+            (pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) )
-+        {
-+            /* Install handler for remote module status interrupts. By default when 
-+             * remote interrupts are forwarded to local root_isr then remote_module_isr is
-+             * enabled and handler hooked up */
-+            if(vlynq_install_isr(pdev,intSetting->map_vector,vlynq_remote_module_isr,
-+                                 pdev, NULL, NULL) == VLYNQ_INVALID_ARG)
-+                return VLYNQ_INVALID_ARG;
-+        }
-+
-+         
-+        /** Clear bits related to INT settings in control register **/
-+        VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK);
-+      
-+        /** Or the bits to be set with the remote Control register **/
-+        VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG | val;
-+         
-+    } /* init remote interrupt settings*/
-+
-+    if(options & VLYNQ_INIT_CLEAR_ERRORS )
-+    {
-+        /* Clear errors during initialization */
-+        tmp = VLYNQ_STATUS_REG  & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK);
-+        VLYNQ_STATUS_REG = tmp;
-+        tmp = VLYNQ_R_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK);
-+        VLYNQ_R_STATUS_REG = tmp;
-+    } 
-+
-+    /* clear int status */
-+    val = VLYNQ_INT_STAT_REG;
-+    VLYNQ_INT_STAT_REG = val;
-+    
-+    /* finish initialization */
-+    pdev->state = VLYNQ_DRV_STATE_RUN;
-+    VLYNQ_RESETCB( VLYNQ_RESET_INITOK);
-+    return VLYNQ_SUCCESS;
-+
-+}
-+
-+
-+/* ----------------------------------------------------------------------------
-+ *  Function : vlynqInterruptInit()
-+ *  Description: This local function is used to set up the ICB table for the 
-+ *  VLYNQ_STATUS_REG vlynq module. The input parameter "pdev" points the vlynq
-+ *  device instance whose ICB is allocated.
-+ *  Return : returns VLYNQ_SUCCESS or vlynq error for failure
-+ * -----------------------------------------------------------------------------
-+ */
-+static int vlynqInterruptInit(VLYNQ_DEV *pdev)
-+{
-+    int i, numslots;
-+
-+    /* Memory allocated statically.
-+     * Initialise ICB,free list.Indicate primary slot empty.
-+     * Intialise intVector <==> map_vector translation table*/
-+    for(i=0; i < VLYNQ_NUM_INT_BITS; i++)
-+    {
-+        pdev->pIntrCB[i].isr = NULL;  
-+        pdev->pIntrCB[i].next = NULL; /*nothing chained */
-+        pdev->vector_map[i] = -1;   /* indicates unmapped  */
-+    }
-+
-+    /* In the ICB slots, [VLYNQ_NUM_INT_BITS i.e 32 to ICB array size) are expansion slots
-+     * required only when interrupt chaining/sharing is supported. In case
-+     * of chained interrupts the list starts from primary slot and the
-+     * additional slots are obtained from the common free area */
-+
-+    /* Initialise freelist */
-+
-+    numslots = VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS;
-+    
-+    if (numslots > VLYNQ_NUM_INT_BITS)
-+    {
-+        pdev->freelist = &(pdev->pIntrCB[VLYNQ_NUM_INT_BITS]);
-+        
-+        for(i = VLYNQ_NUM_INT_BITS; i < (numslots-1) ; i++)
-+        {
-+            pdev->pIntrCB[i].next = &(pdev->pIntrCB[i+1]);
-+            pdev->pIntrCB[i].isr = NULL;
-+        }
-+        pdev->pIntrCB[i].next=NULL; /* Indicate end of freelist*/
-+        pdev->pIntrCB[i].isr=NULL;
-+    }  
-+    else
-+    {   
-+        pdev->freelist = NULL;
-+    }
-+
-+    /** Reset mapping for IV 0-7 **/
-+    VLYNQ_IVR_03TO00_REG = 0;
-+    VLYNQ_IVR_07TO04_REG = 0;
-+
-+    return VLYNQ_SUCCESS;
-+}
-+
-+/** remember that hooking up of root ISR handler with the interrupt controller 
-+ *  is not done as a part of this driver. Typically, it must be done after
-+ *  invoking vlynq_init*/
-+
-+
-+ /* ----------------------------------------------------------------------------
-+ *  ISR with the SOC interrupt controller. This ISR typically scans
-+ *  the Int PENDING/SET register in the VLYNQ module and calls the
-+ *  appropriate ISR associated with the correponding vector number.
-+ * -----------------------------------------------------------------------------
-+ */
-+void vlynq_root_isr(void *arg)
-+{
-+    int    source;  /* Bit position of pending interrupt, start from 0 */
-+    unsigned int interrupts, clrInterrupts;
-+    VLYNQ_DEV * pdev;
-+    VLYNQ_INTR_CNTRL_ICB *entry;
-+
-+    pdev=(VLYNQ_DEV*)(arg);          /*obtain the vlynq device pointer*/
-+ 
-+    interrupts =  VLYNQ_INT_STAT_REG; /* Get the list of pending interrupts */
-+    VLYNQ_INT_STAT_REG = interrupts; /* clear the int CR register */
-+    clrInterrupts = interrupts;      /* save them for further analysis */
-+
-+    debugPrint("vlynq_root_isr: dev %u. INTCR = 0x%08lx\n", pdev->dev_idx, clrInterrupts,0,0,0,0);
-+
-+    /* Scan interrupt bits */
-+    source =0;
-+    while( clrInterrupts != 0)
-+    {
-+        /* test if bit is set? */
-+        if( 0x1ul & clrInterrupts)
-+        {   
-+            entry = &(pdev->pIntrCB[source]);   /* Get the ISR entry */
-+            pdev->intCount++;                   /* update interrupt count */    
-+            if(entry->isr != NULL)
-+            {
-+                do 
-+                {
-+                    pdev->isrCount++;   /* update isr invocation count */    
-+                    /* Call the user ISR and update the count for ISR */
-+		    entry->isrCount++;   
-+                    entry->isr(entry->arg1, entry->arg2, entry->arg3);
-+                    if (entry->next == NULL) break;
-+                    entry = entry->next;
-+
-+                } while (entry->isr != NULL);
-+            }
-+            else
-+            {   
-+                debugPrint(" ISR not installed for vlynq vector:%d\n",source,0,0,0,0,0);
-+            }
-+        }
-+        clrInterrupts >>= 1;    /* Next source bit */
-+        ++source;
-+    } /* endWhile clrInterrupts != 0 */
-+}
-+
-+
-+ /* ----------------------------------------------------------------------------
-+ *  Function : vlynq_local__module_isr()
-+ *  Description: This ISR is attached to the local VLYNQ interrupt vector
-+ *  by the Vlynq Driver when local interrupts are being handled. i.e.
-+ *  intLocal=1. This ISR handles local Vlynq module status interrupts only
-+ *  AS a part of this ISR, user callback in VLYNQ_DEV structure
-+ *  is invoked.
-+ *  VLYNQ_DEV is passed as arg1. arg2 and arg3 are unused.
-+ * -----------------------------------------------------------------------------
-+ */
-+static void vlynq_local_module_isr(void *arg1,void *arg2, void *arg3)
-+{
-+    VLYNQ_REPORT_CB func;
-+    unsigned int dwStatRegVal;
-+    VLYNQ_DEV * pdev;
-+
-+    pdev = (VLYNQ_DEV*) arg1;
-+    /* Callback function is read from the device pointer that is passed as an argument */
-+    func = pdev->report_cb;
-+
-+    /* read local status register */
-+    dwStatRegVal = VLYNQ_STATUS_REG;
-+
-+    /* clear pending events */
-+    VLYNQ_STATUS_REG = dwStatRegVal;
-+   
-+    /* invoke user callback */
-+    if( func != NULL)
-+        func( pdev, VLYNQ_LOCAL_DVC, dwStatRegVal);
-+
-+}
-+
-+ /* ----------------------------------------------------------------------------
-+ *  Function : vlynq_remote_module_isr()
-+ *  Description: This ISR is attached to the remote VLYNQ interrupt vector
-+ *  by the Vlynq Driver when remote interrupts are being handled locally. i.e.
-+ *  intLocal=1. This ISR handles local Vlynq module status interrupts only
-+ *  AS a part of this ISR, user callback in VLYNQ_DEV structure
-+ *  is invoked.
-+ *  The parameters  irq,regs ar unused.
-+ * -----------------------------------------------------------------------------
-+ */
-+static void vlynq_remote_module_isr(void *arg1,void *arg2, void *arg3)
-+{
-+    VLYNQ_REPORT_CB func;
-+    unsigned int dwStatRegVal;
-+    VLYNQ_DEV * pdev;
-+
-+   
-+    pdev = (VLYNQ_DEV*) arg1;
-+   
-+    /* Callback function is read from the device pointer that is passed as an argument */
-+   func = pdev->report_cb;
-+
-+    /* read local status register */
-+    dwStatRegVal = VLYNQ_R_STATUS_REG;
-+
-+    /* clear pending events */
-+    VLYNQ_R_STATUS_REG = dwStatRegVal;
-+
-+    /* invoke user callback */
-+    if( func != NULL)
-+        func( pdev, VLYNQ_REMOTE_DVC, dwStatRegVal);
-+
-+}
-+
-+/* ----------------------------------------------------------------------------
-+ *  Function : vlynq_interrupt_get_count()
-+ *  Description: This function returns the number of times a particular intr
-+ *  has been invoked. 
-+ *
-+ *  It returns 0, if erroneous map_vector is specified or if the corres isr 
-+ *  has not been registered with VLYNQ.
-+ */
-+unsigned int vlynq_interrupt_get_count(VLYNQ_DEV *pdev,
-+					unsigned int map_vector)
-+{
-+    VLYNQ_INTR_CNTRL_ICB *entry;
-+    unsigned int count = 0;
-+
-+    if (map_vector > (VLYNQ_NUM_INT_BITS-1)) 
-+        return count;
-+   
-+    entry = &(pdev->pIntrCB[map_vector]);
-+
-+    if (entry)
-+        count = entry->isrCount;
-+
-+    return (count);
-+}
-+
-+
-+/* ----------------------------------------------------------------------------
-+ *  Function : vlynq_install_isr()
-+ *  Description: This function installs ISR for Vlynq interrupt vector
-+ *  bits(in IntPending register). This function should be used only when 
-+ *  Vlynq interrupts are being handled locally(remote may be programmed to send
-+ *  interrupt packets).Also, the int2cfg should be 1 and the least significant
-+ *  8 bits of the Interrupt Pointer Register must point to Interrupt 
-+ *  Pending/Set Register).
-+ *  If host int2cfg=0 and the Interrupt Pointer register contains 
-+ *  the address of the interrupt set register in the interrupt controller 
-+ *  module of the local device , then the ISR for the remote interrupt must be 
-+ *  directly registered with the Interrupt controller and must not use this API
-+ *  Note: this function simply installs the ISR in ICB It doesnt modify
-+ *  any register settings
-+ */
-+int 
-+vlynq_install_isr(VLYNQ_DEV *pdev,
-+                  unsigned int map_vector,
-+                  VLYNQ_INTR_CNTRL_ISR isr,
-+                  void *arg1, void *arg2, void *arg3)
-+{
-+    VLYNQ_INTR_CNTRL_ICB *entry;
-+
-+    if ( (map_vector > (VLYNQ_NUM_INT_BITS-1)) || (isr == NULL) ) 
-+        return VLYNQ_INVALID_ARG;
-+   
-+    entry = &(pdev->pIntrCB[map_vector]);
-+
-+    if(entry->isr == NULL)
-+    {
-+        entry->isr = isr;
-+        entry->arg1 = arg1;
-+        entry->arg2 = arg2;
-+        entry->arg3 = arg3;
-+        entry->next = NULL;
-+    }
-+    else
-+    {
-+        /** No more empty slots,return error */
-+        if(pdev->freelist == NULL)
-+            return VLYNQ_MEMALLOC_FAIL;
-+        
-+        while(entry->next != NULL)
-+        {
-+            entry = entry->next;
-+        }
-+
-+        /* Append new node to the chain */
-+        entry->next = pdev->freelist;   
-+        /* Remove the appended node from freelist */
-+        pdev->freelist = pdev->freelist->next;  
-+        entry= entry->next;
-+         
-+        /*** Set the ICB fields ***/
-+        entry->isr = isr;
-+        entry->arg1 = arg1;
-+        entry->arg2 = arg2;
-+        entry->arg3 = arg3;
-+        entry->next = NULL;
-+    }
-+   
-+    return VLYNQ_SUCCESS;
-+}
-+
-+
-+
-+/* ----------------------------------------------------------------------------
-+ *  Function : vlynq_uninstall_isr
-+ *  Description: This function is used to uninstall a previously
-+ *  registered ISR. In case of shared/chained interrupts, the 
-+ *  void * arg parameter must uniquely identify the ISR to be
-+ *  uninstalled.
-+ *  Note: this function simply uninstalls the ISR in ICB
-+ *  It doesnt modify any register settings
-+ */
-+int 
-+vlynq_uninstall_isr(VLYNQ_DEV *pdev,
-+                    unsigned int map_vector,
-+                    void *arg1, void *arg2, void *arg3) 
-+{
-+    VLYNQ_INTR_CNTRL_ICB *entry,*temp;
-+
-+    if (map_vector > (VLYNQ_NUM_INT_BITS-1)) 
-+        return VLYNQ_INVALID_ARG;
-+   
-+    entry = &(pdev->pIntrCB[map_vector]);
-+
-+    if(entry->isr == NULL ) 
-+        return VLYNQ_ISR_NON_EXISTENT;
-+
-+    if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) )
-+    {
-+        if(entry->next == NULL)
-+        {
-+            entry->isr=NULL;
-+            return VLYNQ_SUCCESS;
-+        }
-+        else
-+        {
-+            temp =  entry->next;
-+            /* Copy next node in the chain to prim.slot */
-+            entry->isr = temp->isr;
-+            entry->arg1 = temp->arg1;
-+            entry->arg2 = temp->arg2;
-+            entry->arg3 = temp->arg3;
-+            entry->next = temp->next;
-+            /* Free the just copied node */
-+            temp->isr = NULL;
-+            temp->arg1 = NULL;
-+            temp->arg2 = NULL;
-+            temp->arg3 = NULL;
-+            temp->next = pdev->freelist;
-+            pdev->freelist = temp;
-+            return VLYNQ_SUCCESS;
-+        }
-+    }
-+    else
-+    {
-+        temp = entry;
-+        while ( (entry = temp->next) != NULL)
-+        {
-+            if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) )
-+            {
-+                /* remove node from chain */
-+                temp->next = entry->next; 
-+                /* Add the removed node to freelist */
-+                entry->isr = NULL;
-+                entry->arg1 = NULL;
-+                entry->arg2 = NULL;
-+                entry->arg3 = NULL;
-+                entry->next = pdev->freelist;
-+                entry->isrCount = 0;
-+                pdev->freelist  = entry;
-+                return VLYNQ_SUCCESS;
-+            }
-+            temp = entry;
-+        }
-+    
-+        return VLYNQ_ISR_NON_EXISTENT;
-+    }
-+}
-+
-+
-+
-+
-+/* ----------------------------------------------------------------------------
-+ *  function : vlynq_interrupt_vector_set()
-+ *  description:configures interrupt vector mapping,interrupt type
-+ *  polarity -all in one go.
-+ */
-+int 
-+vlynq_interrupt_vector_set(VLYNQ_DEV *pdev,                 /* vlynq device */
-+                           unsigned int int_vector,               /* int vector on vlynq device */
-+                           unsigned int map_vector,               /* bit for this interrupt */
-+                           VLYNQ_DEV_TYPE dev_type,         /* local or remote device */
-+                           VLYNQ_INTR_POLARITY pol,         /* polarity of interrupt */
-+                           VLYNQ_INTR_TYPE type)            /* pulsed/level interrupt */
-+{
-+    volatile unsigned int * vecreg;
-+    unsigned int val=0;
-+    unsigned int bytemask=0XFF;
-+
-+    /* use the lower 8 bits of val to set the value , shift it to 
-+     * appropriate byte position in the ivr and write it to the 
-+     * corresponding register */
-+
-+    /* validate the number of interrupts supported */
-+    if (int_vector >= VLYNQ_IVR_MAXIVR) 
-+        return VLYNQ_INVALID_ARG;
-+        
-+    if(map_vector > (VLYNQ_NUM_INT_BITS - 1) ) 
-+        return VLYNQ_INVALID_ARG;
-+
-+    if (dev_type == VLYNQ_LOCAL_DVC)
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
-+    }
-+    else
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
-+    }
-+
-+    /* Update the intVector<==> bit position translation table */
-+    pdev->vector_map[map_vector] = int_vector;
-+
-+    /* val has been initialised to zero. we only have to turn on appropriate bits*/
-+    if(type == VLYNQ_INTR_PULSED)
-+        val |= VLYNQ_IVR_INTTYPE_MASK;
-+        
-+    if(pol == VLYNQ_INTR_ACTIVE_LOW)
-+        val |= VLYNQ_IVR_INTPOL_MASK;
-+
-+    val |= map_vector;
-+
-+    /** clear the correct byte position and then or val **/
-+    *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
-+
-+    /** write to correct byte position in vecreg*/
-+    *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
-+
-+    /* Setting a interrupt vector, leaves the interrupt disabled 
-+     * which  must be enabled subsequently */
-+
-+    return VLYNQ_SUCCESS;
-+}
-+
-+
-+/* ----------------------------------------------------------------------------
-+ *  Function : vlynq_interrupt_vector_cntl()
-+ *  Description:enables/disable interrupt
-+ */
-+int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
-+                                          unsigned int int_vector,
-+                                          VLYNQ_DEV_TYPE dev_type,
-+                                          unsigned int enable)
-+{
-+    volatile unsigned int *vecReg;
-+    unsigned int val=0;
-+    unsigned int intenMask=0x80;
-+
-+    /* validate the number of interrupts supported */
-+    if (int_vector >= VLYNQ_IVR_MAXIVR) 
-+        return VLYNQ_INVALID_ARG;
-+
-+    if (dev_type == VLYNQ_LOCAL_DVC)
-+    {
-+        vecReg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
-+    }
-+    else
-+    {
-+        vecReg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
-+    }
-+
-+    /** Clear the correct byte position and then or val **/
-+    *vecReg = (*vecReg) & ( ~(intenMask << ( (int_vector %4)*8) ) );
-+
-+    if(enable)
-+    {
-+        val |= VLYNQ_IVR_INTEN_MASK; 
-+        /** Write to correct byte position in vecReg*/
-+        *vecReg = (*vecReg) | (val << ( (int_vector % 4)*8) ) ;
-+    }
-+
-+    return VLYNQ_SUCCESS;
-+
-+}/* end of function vlynq_interrupt_vector_cntl */
-+
-+
-+
-+/* ----------------------------------------------------------------------------
-+ *  Function : vlynq_interrupt_vector_map()
-+ *  Description:Configures interrupt vector mapping alone
-+ */
-+int 
-+vlynq_interrupt_vector_map( VLYNQ_DEV *pdev,
-+                            VLYNQ_DEV_TYPE dev_type,
-+                            unsigned int int_vector,
-+                            unsigned int map_vector)
-+{
-+    volatile unsigned int * vecreg;
-+    unsigned int val=0;
-+    unsigned int bytemask=0x1f;   /* mask to turn off bits corresponding to int vector */ 
-+
-+    /* use the lower 8 bits of val to set the value , shift it to 
-+     * appropriate byte position in the ivr and write it to the 
-+     * corresponding register */
-+
-+    /* validate the number of interrupts supported */
-+    if (int_vector >= VLYNQ_IVR_MAXIVR) 
-+        return VLYNQ_INVALID_ARG;
-+        
-+    if(map_vector > (VLYNQ_NUM_INT_BITS - 1) ) 
-+        return VLYNQ_INVALID_ARG;
-+
-+    if (dev_type == VLYNQ_LOCAL_DVC)
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
-+    }
-+    else
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
-+    }
-+
-+    /* Update the intVector<==> bit position translation table */
-+    pdev->vector_map[map_vector] = int_vector;
-+
-+    /** val has been initialised to zero. we only have to turn on
-+     * appropriate bits*/
-+    val |= map_vector;
-+
-+    /** clear the correct byte position and then or val **/
-+    *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
-+
-+    /** write to correct byte position in vecreg*/
-+    *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
-+
-+    return VLYNQ_SUCCESS;
-+}
-+
-+
-+/* ----------------------------------------------------------------------------
-+ *  function : vlynq_interrupt_set_polarity()
-+ *  description:configures interrupt polarity .
-+ */
-+int 
-+vlynq_interrupt_set_polarity( VLYNQ_DEV *pdev ,
-+                              VLYNQ_DEV_TYPE dev_type,
-+                              unsigned int map_vector,
-+                              VLYNQ_INTR_POLARITY pol)
-+{
-+    volatile unsigned int * vecreg;
-+    int int_vector;
-+    unsigned int val=0;
-+    unsigned int bytemask=0x20; /** mask to turn off bits corresponding to int polarity */
-+
-+    /* get the int_vector from map_vector */
-+    int_vector = pdev->vector_map[map_vector];
-+
-+    if(int_vector == -1) 
-+        return VLYNQ_INTVEC_MAP_NOT_FOUND;
-+
-+    /* use the lower 8 bits of val to set the value , shift it to 
-+     * appropriate byte position in the ivr and write it to the 
-+     * corresponding register */
-+
-+    if (dev_type == VLYNQ_LOCAL_DVC)
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
-+    }
-+    else
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
-+    }
-+
-+    /* val has been initialised to zero. we only have to turn on
-+     * appropriate bits, if need be*/
-+
-+    /** clear the correct byte position and then or val **/
-+    *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
-+
-+    if( pol == VLYNQ_INTR_ACTIVE_LOW)
-+    {
-+        val |= VLYNQ_IVR_INTPOL_MASK;
-+        /** write to correct byte position in vecreg*/
-+        *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
-+    }
-+
-+    return VLYNQ_SUCCESS;
-+}
-+
-+int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
-+                                           VLYNQ_DEV_TYPE dev_type,
-+                                           unsigned int map_vector)
-+{
-+    volatile unsigned int * vecreg;
-+    int int_vector;
-+    unsigned int val=0;
-+
-+    /* get the int_vector from map_vector */
-+    int_vector = pdev->vector_map[map_vector];
-+
-+    if (map_vector > (VLYNQ_NUM_INT_BITS-1))
-+        return(-1);
-+
-+    if(int_vector == -1) 
-+        return VLYNQ_INTVEC_MAP_NOT_FOUND;
-+
-+    /* use the lower 8 bits of val to set the value , shift it to 
-+     * appropriate byte position in the ivr and write it to the 
-+     * corresponding register */
-+
-+    if (dev_type == VLYNQ_LOCAL_DVC)
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
-+    }
-+    else
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
-+    }
-+
-+    /** read the information into val **/
-+    val = (*vecreg) & ((VLYNQ_IVR_INTPOL_MASK << ( (int_vector %4)*8) ) );
-+    
-+    return (val ? (VLYNQ_INTR_ACTIVE_LOW) : (VLYNQ_INTR_ACTIVE_HIGH));
-+}
-+
-+
-+/* ----------------------------------------------------------------------------
-+ *  function : vlynq_interrupt_set_type()
-+ *  description:configures interrupt type .
-+ */
-+int vlynq_interrupt_set_type( VLYNQ_DEV *pdev,
-+                                       VLYNQ_DEV_TYPE dev_type,
-+                                       unsigned int map_vector,
-+                                       VLYNQ_INTR_TYPE type)
-+{
-+    volatile unsigned int * vecreg;
-+    unsigned int val=0;
-+    int int_vector;
-+
-+    /** mask to turn off bits corresponding to interrupt type */
-+    unsigned int bytemask=0x40;
-+
-+    /* get the int_vector from map_vector */
-+    int_vector = pdev->vector_map[map_vector];
-+    if(int_vector == -1) 
-+        return VLYNQ_INTVEC_MAP_NOT_FOUND;
-+
-+    /* use the lower 8 bits of val to set the value , shift it to 
-+     * appropriate byte position in the ivr and write it to the 
-+     * corresponding register */
-+    if (dev_type == VLYNQ_LOCAL_DVC)
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
-+    }
-+    else
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
-+    }
-+
-+    /** val has been initialised to zero. we only have to turn on
-+     * appropriate bits if need be*/
-+
-+     /** clear the correct byte position and then or val **/
-+    *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
-+
-+    if( type == VLYNQ_INTR_PULSED)
-+    {
-+        val |= VLYNQ_IVR_INTTYPE_MASK;
-+        /** write to correct byte position in vecreg*/
-+        *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
-+    }
-+
-+    return VLYNQ_SUCCESS;
-+}
-+
-+/* ----------------------------------------------------------------------------
-+ *  function : vlynq_interrupt_get_type()
-+ *  description:returns interrupt type .
-+ */
-+int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, VLYNQ_DEV_TYPE dev_type,
-+                                       unsigned int map_vector)
-+{
-+    volatile unsigned int * vecreg;
-+    unsigned int val=0;
-+    int int_vector;
-+
-+    if (map_vector > (VLYNQ_NUM_INT_BITS-1))
-+        return(-1);
-+
-+    /* get the int_vector from map_vector */
-+    int_vector = pdev->vector_map[map_vector];
-+    if(int_vector == -1) 
-+        return VLYNQ_INTVEC_MAP_NOT_FOUND;
-+
-+    /* use the lower 8 bits of val to set the value , shift it to 
-+     * appropriate byte position in the ivr and write it to the 
-+     * corresponding register */
-+    if (dev_type == VLYNQ_LOCAL_DVC)
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
-+    }
-+    else
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
-+    }
-+
-+    /** Read the correct bit position into val **/
-+    val = (*vecreg) & ((VLYNQ_IVR_INTTYPE_MASK << ( (int_vector %4)*8) ) );
-+
-+    return (val ? (VLYNQ_INTR_PULSED) : (VLYNQ_INTR_LEVEL));
-+}
-+
-+/* ----------------------------------------------------------------------------
-+ *  function : vlynq_interrupt_enable()
-+ *  description:Enable interrupt by writing to IVR register.
-+ */
-+int vlynq_interrupt_enable( VLYNQ_DEV *pdev,
-+                                     VLYNQ_DEV_TYPE dev_type,
-+                                     unsigned int map_vector)
-+{
-+    volatile unsigned int * vecreg;
-+    unsigned int val=0;
-+    int int_vector;
-+
-+    /** mask to turn off bits corresponding to interrupt enable */
-+    unsigned int bytemask=0x80;
-+
-+    /* get the int_vector from map_vector */
-+    int_vector = pdev->vector_map[map_vector];
-+    if(int_vector == -1) 
-+        return VLYNQ_INTVEC_MAP_NOT_FOUND;
-+
-+    /* use the lower 8 bits of val to set the value , shift it to 
-+     * appropriate byte position in the ivr and write it to the 
-+     * corresponding register */
-+
-+    if (dev_type == VLYNQ_LOCAL_DVC)
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
-+    }
-+    else
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
-+    }
-+
-+    /** val has been initialised to zero. we only have to turn on
-+    *  bit corresponding to interrupt enable*/
-+    val |= VLYNQ_IVR_INTEN_MASK;
-+
-+    /** clear the correct byte position and then or val **/
-+    *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
-+
-+    /** write to correct byte position in vecreg*/
-+    *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
-+
-+    return VLYNQ_SUCCESS;
-+}
-+
-+
-+/* ----------------------------------------------------------------------------
-+ *  function : vlynq_interrupt_disable()
-+ *  description:Disable interrupt by writing to IVR register.
-+ */
-+int 
-+vlynq_interrupt_disable( VLYNQ_DEV *pdev,
-+                         VLYNQ_DEV_TYPE dev_type,
-+                         unsigned int map_vector)
-+{
-+    volatile unsigned int * vecreg;
-+    int int_vector;
-+
-+    /** mask to turn off bits corresponding to interrupt enable */
-+    unsigned int bytemask=0x80;
-+
-+    /* get the int_vector from map_vector */
-+    int_vector = pdev->vector_map[map_vector];
-+    if(int_vector == -1) 
-+        return VLYNQ_INTVEC_MAP_NOT_FOUND;
-+
-+    /* use the lower 8 bits of val to set the value , shift it to 
-+     * appropriate byte position in the ivr and write it to the 
-+     * corresponding register */
-+    if (dev_type == VLYNQ_LOCAL_DVC)
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
-+    }
-+    else
-+    {
-+        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
-+    }
-+
-+    /* We disable the interrupt by simply turning off the bit
-+     * corresponding to Interrupt enable. 
-+     * Clear the interrupt enable bit in the correct byte position **/
-+    *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
-+
-+    /* Dont have to set any bit positions */
-+
-+    return VLYNQ_SUCCESS;
-+
-+}
-+
-+
-+
-+
-diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c
---- linux.old/drivers/char/serial.c	2005-10-21 16:43:20.709226000 +0200
-+++ linux.dev/drivers/char/serial.c	2005-11-10 01:10:46.015585250 +0100
-@@ -419,7 +419,40 @@
- 	return 0;
- }
- 
--#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
-+#if defined(CONFIG_AR7)
-+
-+static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
-+{
-+	return (inb(info->port + (offset * 4)) & 0xff);  
-+}
-+
-+
-+static _INLINE_ unsigned int serial_inp(struct async_struct *info, int offset)
-+{
-+#ifdef CONFIG_SERIAL_NOPAUSE_IO
-+	return (inb(info->port + (offset * 4)) & 0xff);
-+#else
-+	return (inb_p(info->port + (offset * 4)) & 0xff);
-+#endif
-+}
-+
-+static _INLINE_ void serial_out(struct async_struct *info, int offset, int value)
-+{
-+	outb(value, info->port + (offset * 4));      
-+}
-+
-+
-+static _INLINE_ void serial_outp(struct async_struct *info, int offset,
-+		int value)
-+{
-+#ifdef CONFIG_SERIAL_NOPAUSE_IO
-+	outb(value, info->port + (offset * 4));
-+#else
-+	outb_p(value, info->port + (offset * 4));
-+#endif
-+}
-+
-+#elif defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
- 
- #include <asm/mips-boards/atlas.h>
- 
-@@ -478,8 +511,10 @@
-  * needed for certain old 386 machines, I've left these #define's
-  * in....
-  */
-+#ifndef CONFIG_AR7
- #define serial_inp(info, offset)		serial_in(info, offset)
- #define serial_outp(info, offset, value)	serial_out(info, offset, value)
-+#endif
- 
- 
- /*
-@@ -1728,7 +1763,15 @@
- 			/* Special case since 134 is really 134.5 */
- 			quot = (2*baud_base / 269);
- 		else if (baud)
-+#ifdef CONFIG_AR7
-+			quot = (CONFIG_AR7_SYS*500000) / baud;
-+
-+		if ((quot%16)>7)
-+			quot += 8;
-+		quot /=16;
-+#else
- 			quot = baud_base / baud;
-+#endif
- 	}
- 	/* If the quotient is zero refuse the change */
- 	if (!quot && old_termios) {
-@@ -5540,8 +5583,10 @@
- 		state->irq = irq_cannonicalize(state->irq);
- 		if (state->hub6)
- 			state->io_type = SERIAL_IO_HUB6;
-+#ifndef CONFIG_AR7
- 		if (state->port && check_region(state->port,8))
- 			continue;
-+#endif
- #ifdef CONFIG_MCA			
- 		if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus)
- 			continue;
-@@ -5997,7 +6042,15 @@
- 	info->io_type = state->io_type;
- 	info->iomem_base = state->iomem_base;
- 	info->iomem_reg_shift = state->iomem_reg_shift;
-+#ifdef CONFIG_AR7
-+	quot = (CONFIG_AR7_SYS*500000) / baud;
-+
-+	if ((quot%16)>7)
-+		quot += 8;
-+	quot /=16;
-+#else
- 	quot = state->baud_base / baud;
-+#endif
- 	cval = cflag & (CSIZE | CSTOPB);
- #if defined(__powerpc__) || defined(__alpha__)
- 	cval >>= 8;
-diff -urN linux.old/drivers/char/ticfg/Makefile linux.dev/drivers/char/ticfg/Makefile
---- linux.old/drivers/char/ticfg/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/char/ticfg/Makefile	2005-11-10 01:10:46.051587500 +0100
-@@ -0,0 +1,6 @@
-+
-+O_TARGET := ticfg.o
-+
-+obj-$(CONFIG_AR7_ADAM2) := adam2_env.o
-+
-+include $(TOPDIR)/Rules.make
-diff -urN linux.old/drivers/char/ticfg/adam2_env.c linux.dev/drivers/char/ticfg/adam2_env.c
---- linux.old/drivers/char/ticfg/adam2_env.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/char/ticfg/adam2_env.c	2005-11-10 01:10:46.051587500 +0100
-@@ -0,0 +1,85 @@
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/proc_fs.h>
-+#include <linux/fcntl.h>
-+#include <linux/init.h>
-+
-+#include <asm/ar7/adam2_env.h>
-+
-+#undef ADAM2_ENV_DEBUG
-+
-+#ifdef ADAM2_ENV_DEBUG
-+#define DPRINTK(args...) do { printk(args); } while(0);
-+#else
-+#define DPRINTK(args...) do { } while(0);
-+#endif
-+
-+#define ADAM2_ENV_DIR	"ticfg"
-+#define ADAM2_ENV_NAME	"env"
-+
-+static struct proc_dir_entry *adam2_env_proc_dir;
-+static struct proc_dir_entry *adam2_env_proc_ent;
-+
-+static int
-+adam2_proc_read_env(char *page, char **start, off_t pos, int count,
-+		    int *eof, void *data)
-+{
-+	int len;
-+	t_env_var *env;
-+
-+	if (pos > 0)
-+		return 0;
-+
-+	len=0;
-+	for (env = prom_iterenv(0); env; env = prom_iterenv(env)) {
-+		if (env->val) {
-+			/* XXX check for page len */
-+			len += sprintf(page + len, "%s\t%s\n",
-+				       env->name, env->val);
-+		}
-+	}
-+
-+	*eof=1;
-+	return len;
-+}
-+
-+static int __init
-+adam2_env_init(void)
-+{
-+
-+	DPRINTK("%s\n", __FUNCTION__);
-+
-+	adam2_env_proc_dir = proc_mkdir(ADAM2_ENV_DIR, NULL);
-+	if (!adam2_env_proc_dir) {
-+		printk(KERN_ERR "%s: Unable to create /proc/%s entry\n",
-+		       __FUNCTION__, ADAM2_ENV_DIR);
-+		return -ENOMEM;
-+	}
-+	
-+	adam2_env_proc_ent =
-+		create_proc_entry(ADAM2_ENV_NAME, 0444, adam2_env_proc_dir);
-+	if (!adam2_env_proc_ent) {
-+		printk(KERN_ERR "%s: Unable to create /proc/%s/%s entry\n",
-+		       __FUNCTION__, ADAM2_ENV_DIR, ADAM2_ENV_NAME);
-+		remove_proc_entry(ADAM2_ENV_DIR, NULL);
-+		return -ENOMEM;
-+	}
-+	adam2_env_proc_ent->read_proc = adam2_proc_read_env;
-+
-+	return 0;
-+}
-+
-+static
-+void __exit
-+adam2_env_cleanup(void)
-+{
-+	remove_proc_entry(ADAM2_ENV_NAME, adam2_env_proc_dir);
-+	remove_proc_entry(ADAM2_ENV_DIR, NULL);
-+}
-+
-+module_init(adam2_env_init);
-+module_exit(adam2_env_cleanup);
-+
-+MODULE_LICENSE("GPL");
-diff -urN linux.old/include/asm-mips/addrspace.h linux.dev/include/asm-mips/addrspace.h
---- linux.old/include/asm-mips/addrspace.h	2002-11-29 00:53:15.000000000 +0100
-+++ linux.dev/include/asm-mips/addrspace.h	2005-11-10 01:14:16.400733500 +0100
-@@ -11,6 +11,8 @@
- #ifndef __ASM_MIPS_ADDRSPACE_H
- #define __ASM_MIPS_ADDRSPACE_H
- 
-+#include <linux/config.h>
-+
- /*
-  *  Configure language
-  */
-@@ -102,4 +104,11 @@
- #define XKPHYS_TO_PHYS(p)		((p) & TO_PHYS_MASK)
- #define PHYS_TO_XKPHYS(cm,a)		(0x8000000000000000 | ((cm)<<59) | (a))
- 
-+#ifdef CONFIG_AR7_MEMORY
-+#define PHYS_OFFSET	((unsigned long)(CONFIG_AR7_MEMORY))
-+#else
-+#define PHYS_OFFSET	(0)
-+#endif
-+#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
-+
- #endif /* __ASM_MIPS_ADDRSPACE_H */
-diff -urN linux.old/include/asm-mips/ar7/adam2_env.h linux.dev/include/asm-mips/ar7/adam2_env.h
---- linux.old/include/asm-mips/ar7/adam2_env.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/adam2_env.h	2005-11-10 01:10:46.067588500 +0100
-@@ -0,0 +1,13 @@
-+#ifndef _INCLUDE_ASM_AR7_ADAM2_ENV_H_
-+#define	_INCLUDE_ASM_AR7_ADAM2_ENV_H_
-+
-+/* Environment variable */
-+typedef struct {
-+	char *name;
-+	char *val;
-+} t_env_var;
-+
-+char *prom_getenv(char *);
-+t_env_var *prom_iterenv(t_env_var *);
-+
-+#endif /* _INCLUDE_ASM_AR7_ADAM2_ENV_H_ */
-diff -urN linux.old/include/asm-mips/ar7/ar7.h linux.dev/include/asm-mips/ar7/ar7.h
---- linux.old/include/asm-mips/ar7/ar7.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/ar7.h	2005-11-10 01:10:46.067588500 +0100
-@@ -0,0 +1,33 @@
-+/*
-+ * $Id$
-+ * Copyright (C) $Date$  $Author$
-+ * 
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ * 
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ * 
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+ *
-+ */
-+
-+#ifndef _AR7_H
-+#define _AR7_H
-+
-+#include <asm/addrspace.h>
-+#include <linux/config.h>
-+
-+#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(CONFIG_AR7_MEMORY))
-+
-+#define AR7_UART0_REGS_BASE (KSEG1ADDR(0x08610E00))
-+#define AR7_UART1_REGS_BASE (KSEG1ADDR(0x08610F00))
-+#define AR7_BASE_BAUD ( 3686400 / 16 )
-+
-+#endif
-diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm-mips/ar7/avalanche_intc.h
---- linux.old/include/asm-mips/ar7/avalanche_intc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/avalanche_intc.h	2005-11-10 01:10:46.067588500 +0100
-@@ -0,0 +1,292 @@
-+ /*
-+ * Nitin Dhingra, iamnd@ti.com
-+ * Copyright (C) 2000 Texas Instruments Inc.
-+ *
-+ *
-+ * ########################################################################
-+ *
-+ *  This program is free software; you can distribute it and/or modify it
-+ *  under the terms of the GNU General Public License (Version 2) as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  This program is distributed in the hope it will be useful, but WITHOUT
-+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ *  for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License along
-+ *  with this program; if not, write to the Free Software Foundation, Inc.,
-+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * Defines of the Sead board specific address-MAP, registers, etc.
-+ *
-+ */
-+#ifndef _AVALANCHE_INTC_H
-+#define _AVALANCHE_INTC_H
-+
-+#include <linux/config.h>
-+
-+/* ----- */
-+
-+#define KSEG1_BASE                  0xA0000000
-+#define KSEG_INV_MASK               0x1FFFFFFF /* Inverted mask for kseg address */
-+#define PHYS_ADDR(addr)             ((addr) & KSEG_INV_MASK)
-+#define PHYS_TO_K1(addr)            (PHYS_ADDR(addr)|KSEG1_BASE)
-+#define AVALANCHE_INTC_BASE PHYS_TO_K1(0x08612400)
-+
-+/* ----- */
-+
-+#define MIPS_EXCEPTION_OFFSET 8
-+
-+/******************************************************************************
-+ Avalanche Interrupt number
-+******************************************************************************/
-+#define AVINTNUM(x) ((x) - MIPS_EXCEPTION_OFFSET)
-+
-+/*******************************************************************************
-+*Linux Interrupt number
-+*******************************************************************************/
-+#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET)
-+
-+
-+
-+#define AVALANCHE_INT_END_PRIMARY      (40 + MIPS_EXCEPTION_OFFSET)
-+#define AVALANCHE_INT_END_SECONDARY    (32 + MIPS_EXCEPTION_OFFSET)
-+
-+#define AVALANCHE_INT_END_PRIMARY_REG1 (31 + MIPS_EXCEPTION_OFFSET)
-+#define AVALANCHE_INT_END_PRIMARY_REG2 (39 + MIPS_EXCEPTION_OFFSET)
-+
-+#define AVALANCHE_INTC_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + \
-+			    AVINTNUM(AVALANCHE_INT_END_SECONDARY) + \
-+			    MIPS_EXCEPTION_OFFSET)
-+
-+#if defined(CONFIG_AR7_VLYNQ)
-+#define AVALANCHE_INT_END_LOW_VLYNQ  (AVALANCHE_INTC_END + 32)
-+#define AVALANCHE_INT_END_VLYNQ      (AVALANCHE_INTC_END + 32 * CONFIG_AR7_VLYNQ_PORTS)
-+#define AVALANCHE_INT_END             AVALANCHE_INT_END_VLYNQ
-+#else
-+#define AVALANCHE_INT_END             AVALANCHE_INTC_END
-+#endif
-+
-+
-+/*
-+ * Avalanche interrupt controller register base (primary)
-+ */
-+#define AVALANCHE_ICTRL_REGS_BASE  AVALANCHE_INTC_BASE
-+
-+/******************************************************************************
-+ * Avalanche exception controller register base (secondary)
-+ ******************************************************************************/
-+#define AVALANCHE_ECTRL_REGS_BASE  (AVALANCHE_ICTRL_REGS_BASE + 0x80)
-+
-+
-+/******************************************************************************
-+ *  Avalanche Interrupt pacing register base (secondary)
-+ ******************************************************************************/
-+#define AVALANCHE_IPACE_REGS_BASE  (AVALANCHE_ICTRL_REGS_BASE + 0xA0)
-+
-+
-+
-+/******************************************************************************
-+ * Avalanche Interrupt Channel Control register base
-+ *****************************************************************************/
-+#define AVALANCHE_CHCTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x200)
-+
-+
-+struct avalanche_ictrl_regs /* Avalanche Interrupt control registers */
-+{
-+  volatile unsigned long intsr1;    /* Interrupt Status/Set Register 1   0x00 */
-+  volatile unsigned long intsr2;    /* Interrupt Status/Set Register 2   0x04 */
-+  volatile unsigned long unused1;                                      /*0x08 */
-+  volatile unsigned long unused2;                                      /*0x0C */
-+  volatile unsigned long intcr1;    /* Interrupt Clear Register 1        0x10 */
-+  volatile unsigned long intcr2;    /* Interrupt Clear Register 2        0x14 */
-+  volatile unsigned long unused3;                                      /*0x18 */
-+  volatile unsigned long unused4;                                      /*0x1C */
-+  volatile unsigned long intesr1;   /* Interrupt Enable (Set) Register 1 0x20 */
-+  volatile unsigned long intesr2;   /* Interrupt Enable (Set) Register 2 0x24 */
-+  volatile unsigned long unused5;                                      /*0x28 */
-+  volatile unsigned long unused6;                                      /*0x2C */
-+  volatile unsigned long intecr1;   /* Interrupt Enable Clear Register 1 0x30 */
-+  volatile unsigned long intecr2;   /* Interrupt Enable Clear Register 2 0x34 */
-+  volatile unsigned long unused7;                                     /* 0x38 */
-+  volatile unsigned long unused8;                                     /* 0x3c */
-+  volatile unsigned long pintir;    /* Priority Interrupt Index Register 0x40 */
-+  volatile unsigned long intmsr;    /* Priority Interrupt Mask Index Reg 0x44 */
-+  volatile unsigned long unused9;                                     /* 0x48 */
-+  volatile unsigned long unused10;                                    /* 0x4C */
-+  volatile unsigned long intpolr1;  /* Interrupt Polarity Mask register 10x50 */
-+  volatile unsigned long intpolr2;  /* Interrupt Polarity Mask register 20x54 */
-+  volatile unsigned long unused11;                                    /* 0x58 */
-+  volatile unsigned long unused12;                                   /*0x5C */
-+  volatile unsigned long inttypr1;  /* Interrupt Type     Mask register 10x60 */
-+  volatile unsigned long inttypr2;  /* Interrupt Type     Mask register 20x64 */
-+};
-+
-+struct avalanche_exctrl_regs   /* Avalanche Exception control registers */
-+{
-+  volatile unsigned long exsr;      /* Exceptions Status/Set register    0x80 */
-+  volatile unsigned long reserved;                                     /*0x84 */
-+  volatile unsigned long excr;      /* Exceptions Clear Register         0x88 */
-+  volatile unsigned long reserved1;                                    /*0x8c */
-+  volatile unsigned long exiesr;    /* Exceptions Interrupt Enable (set) 0x90 */
-+  volatile unsigned long reserved2;                                    /*0x94 */
-+  volatile unsigned long exiecr;    /* Exceptions Interrupt Enable(clear)0x98 */
-+};
-+struct avalanche_ipace_regs
-+{
-+
-+  volatile unsigned long ipacep;    /* Interrupt pacing register         0xa0 */
-+  volatile unsigned long ipacemap;  /*Interrupt Pacing Map Register      0xa4 */
-+  volatile unsigned long ipacemax;  /*Interrupt Pacing Max Register      0xa8 */
-+};
-+struct avalanche_channel_int_number
-+{
-+  volatile unsigned long cintnr0;   /* Channel Interrupt Number Register0x200 */
-+  volatile unsigned long cintnr1;   /* Channel Interrupt Number Register0x204 */
-+  volatile unsigned long cintnr2;   /* Channel Interrupt Number Register0x208 */
-+  volatile unsigned long cintnr3;   /* Channel Interrupt Number Register0x20C */
-+  volatile unsigned long cintnr4;   /* Channel Interrupt Number Register0x210 */
-+  volatile unsigned long cintnr5;   /* Channel Interrupt Number Register0x214 */
-+  volatile unsigned long cintnr6;   /* Channel Interrupt Number Register0x218 */
-+  volatile unsigned long cintnr7;   /* Channel Interrupt Number Register0x21C */
-+  volatile unsigned long cintnr8;   /* Channel Interrupt Number Register0x220 */
-+  volatile unsigned long cintnr9;   /* Channel Interrupt Number Register0x224 */
-+  volatile unsigned long cintnr10;  /* Channel Interrupt Number Register0x228 */
-+  volatile unsigned long cintnr11;  /* Channel Interrupt Number Register0x22C */
-+  volatile unsigned long cintnr12;  /* Channel Interrupt Number Register0x230 */
-+  volatile unsigned long cintnr13;  /* Channel Interrupt Number Register0x234 */
-+  volatile unsigned long cintnr14;  /* Channel Interrupt Number Register0x238 */
-+  volatile unsigned long cintnr15;  /* Channel Interrupt Number Register0x23C */
-+  volatile unsigned long cintnr16;  /* Channel Interrupt Number Register0x240 */
-+  volatile unsigned long cintnr17;  /* Channel Interrupt Number Register0x244 */
-+  volatile unsigned long cintnr18;  /* Channel Interrupt Number Register0x248 */
-+  volatile unsigned long cintnr19;  /* Channel Interrupt Number Register0x24C */
-+  volatile unsigned long cintnr20;  /* Channel Interrupt Number Register0x250 */
-+  volatile unsigned long cintnr21;  /* Channel Interrupt Number Register0x254 */
-+  volatile unsigned long cintnr22;  /* Channel Interrupt Number Register0x358 */
-+  volatile unsigned long cintnr23;  /* Channel Interrupt Number Register0x35C */
-+  volatile unsigned long cintnr24;  /* Channel Interrupt Number Register0x260 */
-+  volatile unsigned long cintnr25;  /* Channel Interrupt Number Register0x264 */
-+  volatile unsigned long cintnr26;  /* Channel Interrupt Number Register0x268 */
-+  volatile unsigned long cintnr27;  /* Channel Interrupt Number Register0x26C */
-+  volatile unsigned long cintnr28;  /* Channel Interrupt Number Register0x270 */
-+  volatile unsigned long cintnr29;  /* Channel Interrupt Number Register0x274 */
-+  volatile unsigned long cintnr30;  /* Channel Interrupt Number Register0x278 */
-+  volatile unsigned long cintnr31;  /* Channel Interrupt Number Register0x27C */
-+  volatile unsigned long cintnr32;  /* Channel Interrupt Number Register0x280 */
-+  volatile unsigned long cintnr33;  /* Channel Interrupt Number Register0x284 */
-+  volatile unsigned long cintnr34;  /* Channel Interrupt Number Register0x288 */
-+  volatile unsigned long cintnr35;  /* Channel Interrupt Number Register0x28C */
-+  volatile unsigned long cintnr36;  /* Channel Interrupt Number Register0x290 */
-+  volatile unsigned long cintnr37;  /* Channel Interrupt Number Register0x294 */
-+  volatile unsigned long cintnr38;  /* Channel Interrupt Number Register0x298 */
-+  volatile unsigned long cintnr39;  /* Channel Interrupt Number Register0x29C */
-+};
-+
-+struct avalanche_interrupt_line_to_channel
-+{
-+  unsigned long int_line0;    /* Start of primary interrupts */
-+  unsigned long int_line1;
-+  unsigned long int_line2;
-+  unsigned long int_line3;
-+  unsigned long int_line4;
-+  unsigned long int_line5;
-+  unsigned long int_line6;
-+  unsigned long int_line7;
-+  unsigned long int_line8;
-+  unsigned long int_line9;
-+  unsigned long int_line10;
-+  unsigned long int_line11;
-+  unsigned long int_line12;
-+  unsigned long int_line13;
-+  unsigned long int_line14;
-+  unsigned long int_line15;
-+  unsigned long int_line16;
-+  unsigned long int_line17;
-+  unsigned long int_line18;
-+  unsigned long int_line19;
-+  unsigned long int_line20;
-+  unsigned long int_line21;
-+  unsigned long int_line22;
-+  unsigned long int_line23;
-+  unsigned long int_line24;
-+  unsigned long int_line25;
-+  unsigned long int_line26;
-+  unsigned long int_line27;
-+  unsigned long int_line28;
-+  unsigned long int_line29;
-+  unsigned long int_line30;
-+  unsigned long int_line31;
-+  unsigned long int_line32;
-+  unsigned long int_line33;
-+  unsigned long int_line34;
-+  unsigned long int_line35;
-+  unsigned long int_line36;
-+  unsigned long int_line37;
-+  unsigned long int_line38;
-+  unsigned long int_line39;
-+};
-+
-+
-+/* Interrupt Line #'s  (Sangam peripherals) */
-+
-+/*------------------------------*/
-+/* Sangam primary interrupts */
-+/*------------------------------*/
-+
-+#define UNIFIED_SECONDARY_INTERRUPT  0
-+#define AVALANCHE_EXT_INT_0          1
-+#define AVALANCHE_EXT_INT_1          2
-+/*  Line #3  Reserved               */
-+/*  Line #4  Reserved               */
-+#define AVALANCHE_TIMER_0_INT        5
-+#define AVALANCHE_TIMER_1_INT        6
-+#define AVALANCHE_UART0_INT          7
-+#define AVALANCHE_UART1_INT          8
-+#define AVALANCHE_PDMA_INT0          9
-+#define AVALANCHE_PDMA_INT1          10
-+/*  Line #11  Reserved               */
-+/*  Line #12  Reserved               */
-+/*  Line #13  Reserved               */
-+/*  Line #14  Reserved               */
-+#define AVALANCHE_ATM_SAR_INT        15
-+/*  Line #16  Reserved               */
-+/*  Line #17  Reserved               */
-+/*  Line #18  Reserved               */
-+#define AVALANCHE_MAC0_INT           19
-+/*  Line #20  Reserved               */
-+#define AVALANCHE_VLYNQ0_INT         21
-+#define AVALANCHE_CODEC_WAKE_INT     22
-+/*  Line #23  Reserved               */
-+#define AVALANCHE_USB_INT            24
-+#define AVALANCHE_VLYNQ1_INT         25
-+/*  Line #26  Reserved               */
-+/*  Line #27  Reserved               */
-+#define AVALANCHE_MAC1_INT           28
-+#define AVALANCHE_I2CM_INT           29
-+#define AVALANCHE_PDMA_INT2          30
-+#define AVALANCHE_PDMA_INT3          31
-+/*  Line #32  Reserved               */
-+/*  Line #33  Reserved               */
-+/*  Line #34  Reserved               */
-+/*  Line #35  Reserved               */
-+/*  Line #36  Reserved               */
-+#define AVALANCHE_VDMA_VT_RX_INT     37
-+#define AVALANCHE_VDMA_VT_TX_INT     38
-+#define AVALANCHE_ADSLSS_INT         39
-+
-+/*-----------------------------------*/
-+/* Sangam Secondary Interrupts    */
-+/*-----------------------------------*/
-+#define PRIMARY_INTS                 40
-+
-+#define EMIF_INT                    (7 + PRIMARY_INTS)
-+
-+
-+extern void avalanche_int_set(int channel, int line);
-+
-+
-+#endif /* _AVALANCHE_INTC_H */
-diff -urN linux.old/include/asm-mips/ar7/avalanche_misc.h linux.dev/include/asm-mips/ar7/avalanche_misc.h
---- linux.old/include/asm-mips/ar7/avalanche_misc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/avalanche_misc.h	2005-11-10 01:10:46.067588500 +0100
-@@ -0,0 +1,174 @@
-+#ifndef _AVALANCHE_MISC_H_
-+#define _AVALANCHE_MISC_H_
-+
-+typedef enum AVALANCHE_ERR_t
-+{
-+    AVALANCHE_ERR_OK        = 0,    /* OK or SUCCESS */
-+    AVALANCHE_ERR_ERROR     = -1,   /* Unspecified/Generic ERROR */
-+
-+    /* Pointers and args */
-+    AVALANCHE_ERR_INVARG        = -2,   /* Invaild argument to the call */
-+    AVALANCHE_ERR_NULLPTR       = -3,   /* NULL pointer */
-+    AVALANCHE_ERR_BADPTR        = -4,   /* Bad (out of mem) pointer */
-+
-+    /* Memory issues */
-+    AVALANCHE_ERR_ALLOC_FAIL    = -10,  /* allocation failed */
-+    AVALANCHE_ERR_FREE_FAIL     = -11,  /* free failed */
-+    AVALANCHE_ERR_MEM_CORRUPT   = -12,  /* corrupted memory */
-+    AVALANCHE_ERR_BUF_LINK      = -13,  /* buffer linking failed */
-+
-+    /* Device issues */
-+    AVALANCHE_ERR_DEVICE_TIMEOUT    = -20,  /* device timeout on read/write */
-+    AVALANCHE_ERR_DEVICE_MALFUNC    = -21,  /* device malfunction */
-+
-+    AVALANCHE_ERR_INVID     = -30   /* Invalid ID */
-+
-+} AVALANCHE_ERR;
-+
-+/*****************************************************************************
-+ * Reset Control Module
-+ *****************************************************************************/
-+
-+typedef enum AVALANCHE_RESET_MODULE_tag
-+{
-+    RESET_MODULE_UART0      = 0,
-+    RESET_MODULE_UART1      = 1,
-+    RESET_MODULE_I2C        = 2,
-+    RESET_MODULE_TIMER0     = 3,
-+    RESET_MODULE_TIMER1     = 4,
-+    RESET_MODULE_GPIO       = 6,
-+    RESET_MODULE_ADSLSS     = 7,
-+    RESET_MODULE_USBS       = 8,
-+    RESET_MODULE_SAR        = 9,
-+    RESET_MODULE_VDMA_VT    = 11,
-+    RESET_MODULE_FSER       = 12,
-+    RESET_MODULE_VLYNQ1     = 16,
-+    RESET_MODULE_EMAC0      = 17,
-+    RESET_MODULE_DMA        = 18,
-+    RESET_MODULE_BIST       = 19,
-+    RESET_MODULE_VLYNQ0     = 20,
-+    RESET_MODULE_EMAC1      = 21,
-+    RESET_MODULE_MDIO       = 22,
-+    RESET_MODULE_ADSLSS_DSP = 23,
-+    RESET_MODULE_EPHY       = 26
-+} AVALANCHE_RESET_MODULE_T;
-+
-+typedef enum AVALANCHE_RESET_CTRL_tag
-+{
-+    IN_RESET        = 0,
-+    OUT_OF_RESET
-+} AVALANCHE_RESET_CTRL_T;
-+
-+typedef enum AVALANCHE_SYS_RST_MODE_tag
-+{
-+    RESET_SOC_WITH_MEMCTRL      = 1,    /* SW0 bit in SWRCR register */
-+    RESET_SOC_WITHOUT_MEMCTRL   = 2     /* SW1 bit in SWRCR register */
-+} AVALANCHE_SYS_RST_MODE_T;
-+
-+typedef enum AVALANCHE_SYS_RESET_STATUS_tag
-+{
-+    HARDWARE_RESET = 0,
-+    SOFTWARE_RESET0,            /* Caused by writing 1 to SW0 bit in SWRCR register */
-+    WATCHDOG_RESET,
-+    SOFTWARE_RESET1             /* Caused by writing 1 to SW1 bit in SWRCR register */
-+} AVALANCHE_SYS_RESET_STATUS_T;
-+
-+AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(AVALANCHE_RESET_MODULE_T reset_module);
-+void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode);
-+AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status(void);
-+
-+typedef int (*REMOTE_VLYNQ_DEV_RESET_CTRL_FN)(unsigned int reset_module, AVALANCHE_RESET_CTRL_T reset_ctrl);
-+
-+/*****************************************************************************
-+ * Power Control Module
-+ *****************************************************************************/
-+
-+typedef enum AVALANCHE_POWER_CTRL_tag
-+{
-+    POWER_CTRL_POWER_UP = 0,
-+    POWER_CTRL_POWER_DOWN
-+} AVALANCHE_POWER_CTRL_T;
-+
-+typedef enum AVALANCHE_SYS_POWER_MODE_tag
-+{
-+    GLOBAL_POWER_MODE_RUN       = 0,    /* All system is up */
-+    GLOBAL_POWER_MODE_IDLE,             /* MIPS is power down, all peripherals working */
-+    GLOBAL_POWER_MODE_STANDBY,          /* Chip in power down, but clock to ADSKL subsystem is running */
-+    GLOBAL_POWER_MODE_POWER_DOWN        /* Total chip is powered down */
-+} AVALANCHE_SYS_POWER_MODE_T;
-+
-+void avalanche_power_ctrl(unsigned int power_module,  AVALANCHE_POWER_CTRL_T power_ctrl);
-+AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int power_module);
-+void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode);
-+AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void);
-+
-+/*****************************************************************************
-+ * Wakeup Control
-+ *****************************************************************************/
-+
-+typedef enum AVALANCHE_WAKEUP_INTERRUPT_tag
-+{
-+    WAKEUP_INT0 = 1,
-+    WAKEUP_INT1 = 2,
-+    WAKEUP_INT2 = 4,
-+    WAKEUP_INT3 = 8
-+} AVALANCHE_WAKEUP_INTERRUPT_T;
-+
-+typedef enum TNETV1050_WAKEUP_CTRL_tag
-+{
-+    WAKEUP_DISABLED = 0,
-+    WAKEUP_ENABLED
-+} AVALANCHE_WAKEUP_CTRL_T;
-+
-+typedef enum TNETV1050_WAKEUP_POLARITY_tag
-+{
-+    WAKEUP_ACTIVE_HIGH = 0,
-+    WAKEUP_ACTIVE_LOW
-+} AVALANCHE_WAKEUP_POLARITY_T;
-+
-+void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int,
-+                           AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl,
-+                           AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity);
-+
-+/*****************************************************************************
-+ * GPIO Control
-+ *****************************************************************************/
-+
-+typedef enum AVALANCHE_GPIO_PIN_MODE_tag
-+{
-+    FUNCTIONAL_PIN = 0,
-+    GPIO_PIN = 1
-+} AVALANCHE_GPIO_PIN_MODE_T;
-+
-+typedef enum AVALANCHE_GPIO_PIN_DIRECTION_tag
-+{
-+    GPIO_OUTPUT_PIN = 0,
-+    GPIO_INPUT_PIN = 1
-+} AVALANCHE_GPIO_PIN_DIRECTION_T;
-+
-+typedef enum { GPIO_FALSE, GPIO_TRUE } AVALANCHE_GPIO_BOOL_T;
-+
-+void avalanche_gpio_init(void);
-+int avalanche_gpio_ctrl(unsigned int gpio_pin,
-+                         AVALANCHE_GPIO_PIN_MODE_T pin_mode,
-+                         AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction);
-+int avalanche_gpio_ctrl_with_link_count(unsigned int gpio_pin,
-+                         AVALANCHE_GPIO_PIN_MODE_T pin_mode,
-+                         AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction);
-+int avalanche_gpio_out_bit(unsigned int gpio_pin, int value);
-+int avalanche_gpio_in_bit(unsigned int gpio_pin);
-+int avalanche_gpio_out_value(unsigned int out_val, unsigned int set_mask, unsigned int reg_index);
-+int avalanche_gpio_out_value_with_link_count(unsigned int out_val, unsigned int set_mask, unsigned int reg_index);
-+int avalanche_gpio_in_value(unsigned int *in_val, unsigned int reg_index);
-+
-+unsigned int avalanche_get_chip_version_info(void);
-+
-+unsigned int avalanche_get_vbus_freq(void);
-+void         avalanche_set_vbus_freq(unsigned int);
-+
-+
-+typedef int (*SET_MDIX_ON_CHIP_FN_T)(unsigned int base_addr, unsigned int operation);
-+int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation);
-+unsigned int avalanche_is_mdix_on_chip(void);
-+
-+#endif
-diff -urN linux.old/include/asm-mips/ar7/avalanche_regs.h linux.dev/include/asm-mips/ar7/avalanche_regs.h
---- linux.old/include/asm-mips/ar7/avalanche_regs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/avalanche_regs.h	2005-11-10 01:10:46.071588750 +0100
-@@ -0,0 +1,567 @@
-+/* 
-+ *  $Id$
-+ *  Avalanche Register Descriptions
-+ *
-+ *  Jeff Harrell, jharrell@ti.com
-+ *  2000 (c) Texas Instruments Inc.
-+ */
-+
-+#ifndef __AVALANCHE_REGS_H
-+#define __AVALANCHE_REGS_H
-+
-+#include <asm/addrspace.h>
-+#include <linux/config.h>
-+
-+/*----------------------------------------*/
-+/* Base offsets within the Avalanche ASIC */
-+/*----------------------------------------*/
-+
-+#define BBIF_SPACE0     (KSEG1ADDR(0x01000000))
-+#define BBIF_SPACE1     (KSEG1ADDR(0x01800000))
-+#define BBIF_CONTROL    (KSEG1ADDR(0x02000000))
-+#define ATM_SAR_BASE    (KSEG1ADDR(0x03000000))
-+#define USB_MCU_BASE    (KSEG1ADDR(0x03400000))
-+#define DES_BASE        (KSEG1ADDR(0x08600000))
-+#define ETH_MACA_BASE   (KSEG1ADDR(0x08610000))
-+#define ETH_MACB_BASE   (KSEG1ADDR(0x08612800))
-+#define MEM_CTRLR_BASE  (KSEG1ADDR(0x08610800))
-+#define GPIO_BASE       (KSEG1ADDR(0x08610900))
-+#define CLK_CTRL_BASE   (KSEG1ADDR(0x08610A00))
-+#define WATCH_DOG_BASE  (KSEG1ADDR(0x08610B00))
-+#define TMR1_BASE       (KSEG1ADDR(0x08610C00))
-+#define TRM2_BASE       (KSEG1ADDR(0x08610D00))
-+#define UARTA_BASE      (KSEG1ADDR(0x08610E00))
-+#define UARTB_BASE      (KSEG1ADDR(0x08610F00))
-+#define I2C_BASE        (KSEG1ADDR(0x08611000))
-+#define DEV_ID_BASE     (KSEG1ADDR(0x08611100))
-+#define USB_BASE        (KSEG1ADDR(0x08611200))
-+#define PCI_CONFIG_BASE (KSEG1ADDR(0x08611300))
-+#define DMA_BASE        (KSEG1ADDR(0x08611400))
-+#define RESET_CTRL_BASE (KSEG1ADDR(0x08611600))
-+#define DSL_IF_BASE     (KSEG1ADDR(0x08611B00))
-+#define INT_CTL_BASE    (KSEG1ADDR(0x08612400)) 
-+#define PHY_BASE        (KSEG1ADDR(0x1E000000))
-+
-+/*---------------------------------*/
-+/* Device ID, chip version number  */
-+/*---------------------------------*/
-+
-+#define AVALANCHE_CHVN  (*(volatile unsigned int *)(DEV_ID_BASE+0x14))
-+#define AVALANCHE_DEVID1 (*(volatile unsigned int *)(DEV_ID_BASE+0x18))
-+#define AVALANCHE_DEVID2 (*(volatile unsigned int *)(DEV_ID_BASE+0x1C))
-+
-+/*----------------------------------*/
-+/* Reset Control VW changed to ptrs */
-+/*----------------------------------*/
-+
-+#define AVALANCHE_PRCR  (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x0))  /* Peripheral reset control */
-+#define AVALANCHE_SWRCR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x4))  /* Software reset control   */
-+#define AVALANCHE_RSR   (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x8))  /* Reset status register    */
-+
-+/* reset control bits */
-+
-+#define AV_RST_UART0    (1<<0)    /* Brings UART0 out of reset              */
-+#define AV_RST_UART1    (1<<1)    /* Brings UART1 out of reset              */
-+#define AV_RST_IICM     (1<<2)    /* Brings the I2CM out of reset           */
-+#define AV_RST_TIMER0   (1<<3)    /* Brings Timer 0 out of reset            */
-+#define AV_RST_TIMER1   (1<<4)    /* Brings Timer 1 out of reset            */
-+#define AV_RST_DES      (1<<5)    /* Brings the DES module out of reset     */
-+#define AV_RST_GPIO     (1<<6)    /* Brings the GPIO module out of reset (see note below) */
-+/*
-+  JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
-+       If you reset the GPIO interface all of the directions (i/o) of the UART B
-+       interface pins are inputs and must be reconfigured so as not to lose the 
-+       serial console interface
-+  JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
-+*/
-+#define AV_RST_BBIF     (1<<7)    /* Brings the Broadband interface out of reset */
-+#define AV_RST_USB      (1<<8)    /* Brings the USB module out of reset     */
-+#define AV_RST_SAR      (1<<9)    /* Brings the SAR out of reset            */
-+#define AV_RST_HDLC     (1<<10)   /* Brings the HDLC module out of reset    */
-+#define AV_RST_PCI      (1<<16)   /* Brings the PCI module out of reset     */
-+#define AV_RST_ETH_MAC0 (1<<17)   /* Brings the Ethernet MAC0 out of reset  */
-+#define AV_RST_PICO_DMA (1<<18)   /* Brings the PICO DMA module out of reset */
-+#define AV_RST_BIST     (1<<19)   /* Brings the BIST module out of reset    */
-+#define AV_RST_DSP      (1<<20)   /* Brings the DSP sub system out of reset */
-+#define AV_RST_ETH_MAC1 (1<<21)   /* Brings the Ethernet MAC1 out of reset  */
-+
-+/*----------------------*/
-+/* Physical interfaces  */
-+/*----------------------*/
-+
-+/* Phy loopback */
-+#define PHY_LOOPBACK    1
-+
-+
-+/* Phy 0 */
-+#define PHY0BASE        (PHY_BASE)
-+#define PHY0RST         (*(volatile unsigned char *) (PHY0BASE))      /* reset   */
-+#define PHY0CTRL        (*(volatile unsigned char *) (PHY0BASE+0x5))  /* control */
-+#define PHY0RACPCTRL    (*(volatile unsigned char *) (PHY0BASE+0x50)) /* RACP control/status */ 
-+#define PHY0TACPCTRL    (*(volatile unsigned char *) (PHY0BASE+0x60)) /* TACP idle/unassigned cell hdr */
-+#define PHY0RACPINT     (*(volatile unsigned char *) (PHY0BASE+0x51)) /* RACP interrupt enable/Status */
-+
-+
-+/* Phy 1 */
-+
-+#define PHY1BASE        (PHY_BASE + 0x100000)
-+#define PHY1RST         (*(volatile unsigned char *) (PHY1BASE))      /* reset   */
-+#define PHY1CTRL        (*(volatile unsigned char *) (PHY1BASE+0x5))  /* control */
-+#define PHY1RACPCTRL    (*(volatile unsigned char *) (PHY1BASE+0x50)) 
-+#define PHY1TACPCTRL    (*(volatile unsigned char *) (PHY1BASE+0x60)) 
-+#define PHY1RACPINT     (*(volatile unsigned char *) (PHY1BASE+0x51)) 
-+
-+/* Phy 2 */
-+
-+#define PHY2BASE        (PHY_BASE + 0x200000)
-+#define PHY2RST         (*(volatile unsigned char *) (PHY2BASE))      /* reset   */
-+#define PHY2CTRL        (*(volatile unsigned char *) (PHY2BASE+0x5))  /* control */
-+#define PHY2RACPCTRL    (*(volatile unsigned char *) (PHY2BASE+0x50)) 
-+#define PHY2TACPCTRL    (*(volatile unsigned char *) (PHY2BASE+0x60)) 
-+#define PHY2RACPINT     (*(volatile unsigned char *) (PHY2BASE+0x51)) 
-+
-+/*-------------------*/
-+/* Avalanche ATM SAR */
-+/*-------------------*/
-+
-+#define AVSAR_SYSCONFIG    (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000000)) /* SAR system config register    */
-+#define AVSAR_SYSSTATUS    (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000004)) /* SAR system status register    */
-+#define AVSAR_INT_ENABLE   (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000008)) /* SAR interrupt enable register */
-+#define AVSAR_CONN_VPI_VCI (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000000c)) /* VPI/VCI connection config     */
-+#define AVSAR_CONN_CONFIG  (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000010)) /* Connection config register    */
-+#define AVSAR_OAM_CONFIG   (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018)) /* OAM configuration register    */
-+
-+/* Transmit completion ring registers */
-+
-+#define AVSAR_TCRAPTR       (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000100))
-+#define AVSAR_TCRASIZE      (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000104))
-+#define AVSAR_TCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000108))
-+#define AVSAR_TCRATOTENT    (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000010c))
-+#define AVSAR_TCRAFREEENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000110))
-+#define AVSAR_TCRAPENDENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000114))
-+#define AVSAR_TCRAENTINC    (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000118))
-+#define AVSAR_TCRBPTR       (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000011c))
-+#define AVSAR_TCRBSIZE      (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000120))
-+#define AVSAR_TCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000124))
-+#define AVSAR_TCRBTOTENT    (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000128))
-+#define AVSAR_TCRBFREEENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000012c))
-+#define AVSAR_TCRBPENDENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000130))
-+#define AVSAR_TCRBENTINC    (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000134))
-+
-+/* Transmit Queue Packet registers */
-+#define AVSAR_TXQUEUE_PKT0  (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000140))
-+#define AVSAR_TXQUEUE_PKT1  (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000144))
-+#define AVSAR_TXQUEUE_PKT2  (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000148))
-+#define AVSAR_TX_FLUSH      (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000014C))
-+/* Receive completion ring registers */
-+
-+#define AVSAR_RCRAPTR       (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000200))
-+#define AVSAR_RCRASIZE      (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000204))
-+#define AVSAR_RCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000208))
-+#define AVSAR_RCRATOTENT    (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000020c))
-+#define AVSAR_RCRAFREEENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000210))
-+#define AVSAR_RCRAPENDENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000214))
-+#define AVSAR_RCRAENTINC    (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000218))
-+#define AVSAR_RCRBPTR       (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000021c))
-+#define AVSAR_RCRBSIZE      (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000220))
-+#define AVSAR_RCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000224))
-+#define AVSAR_RCRBTOTENT    (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000228))
-+#define AVSAR_RCRBFREEENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000022c))
-+#define AVSAR_RCRBPENDENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000230))
-+#define AVSAR_RCRBENTINC    (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000234))
-+
-+#define AVSAR_RXFBL_ADD0    (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000240)) /* Rx Free buffer list add 0  */
-+#define AVSAR_RXFBL_ADD1    (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000244)) /* Rx Free buffer list add 1  */
-+#define AVSAR_RXFBL_ADD2    (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000248)) /* Rx Free buffer list add 2  */
-+#define AVSAR_RXFBLSIZE_0   (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000028c)) /* Rx Free buffer list size 0 */
-+#define AVSAR_RXFBLSIZE_1   (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000029c)) /* Rx Free buffer list size 1 */
-+#define AVSAR_RXFBLSIZE_2   (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002ac)) /* Rx Free buffer list size 2 */
-+#define AVSAR_RXFBLSIZE_3   (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002bc)) /* Rx Free buffer list size 3 */
-+
-+
-+#if defined(CONFIG_MIPS_EVM3D) || defined(CONFIG_MIPS_AR5D01) || defined(CONFIG_MIPS_AR5W01)
-+
-+#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010480))
-+#define AVSAR_OAM_CC_SINK   (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010484))
-+#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010488))
-+#define AVSAR_OAM_CPID0      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E0))
-+#define AVSAR_OAM_LLID0      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F0))
-+#define AVSAR_OAM_CPID1      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E4))
-+#define AVSAR_OAM_LLID1      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F4))
-+#define AVSAR_OAM_CPID2      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E8))
-+#define AVSAR_OAM_LLID2      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F8))
-+#define AVSAR_OAM_CPID3      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104EC))
-+#define AVSAR_OAM_LLID3      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104FC))
-+#define AVSAR_OAM_CORR_TAG      (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010500))
-+#define AVSAR_OAM_FAR_COUNT      (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010520))
-+#define AVSAR_OAM_NEAR_COUNT      (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010540))
-+#define AVSAR_OAM_CONFIG_REG      (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018))
-+#define AVSAR_FAIRNESS_REG   (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104B8))
-+#define AVSAR_UBR_PCR_REG   (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010490))
-+
-+
-+/*
-+
-+#define OAM_CPID_ADD  0xa30104e0
-+
-+#define OAM_LLID_ADD  0xa30104f0
-+
-+#define OAM_LLID_VAL  0xffffffff
-+
-+#define OAM_CORR_TAG  0xa3010500
-+
-+#define OAM_FAR_COUNT_ADD 0xa3010520
-+
-+#define OAM_NEAR_COUNT_ADD 0xa3010540
-+
-+#define OAM_CONFIG_REG_ADD 0xa3000018
-+*/
-+
-+
-+#else /* CONFIG_MIPS_EVM3 || CONFIG_MIPS_ACPEP */
-+
-+#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012000))
-+#define AVSAR_OAM_CC_SINK   (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012004))
-+#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012008))
-+#define AVSAR_OAM_CPID      (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012300))
-+
-+#endif /* CONFIG_MIPS_EVM3D || CONFIG_MIPS_AR5D01 || CONFIG_MIPS_AR5W01 */
-+
-+
-+#define AVSAR_STATE_RAM     (ATM_SAR_BASE + 0x010000) /* SAR state RAM */
-+#define AVSAR_PDSP_BASE     (ATM_SAR_BASE + 0x020000) /* SAR PDSP base address   */
-+#define AVSAR_TXDMA_BASE    (ATM_SAR_BASE + 0x030000) /* Transmit DMA state base */ 
-+#define AVSAR_TDMASTATE6    0x18                      /* Transmit DMA state word 6 */
-+#define AVSAR_RXDMA_BASE    (ATM_SAR_BASE + 0x040000) /* Receive  DMA state base */
-+#define AVSAR_RDMASTATE0    0x0                       /* Receive  DMA state word 0 */
-+
-+/*------------------------------------------*/
-+/* DSL Interface                            */
-+/*------------------------------------------*/
-+
-+#define AVDSL_TX_EN          (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000000))
-+#define AVDSL_RX_EN          (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000004))
-+#define AVDSL_POLL           (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000008))
-+
-+/* Fast */
-+
-+#define AVDSL_TX_FIFO_ADDR0  (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000000C))
-+#define AVDSL_TX_FIFO_BASE0  (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000010))
-+#define AVDSL_TX_FIFO_LEN0   (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000014))
-+#define AVDSL_TX_FIFO_PR0    (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000018))
-+#define AVDSL_RX_FIFO_ADDR0  (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000001C))
-+#define AVDSL_RX_FIFO_BASE0  (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000020))
-+#define AVDSL_RX_FIFO_LEN0   (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000024))
-+#define AVDSL_RX_FIFO_PR0    (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000028))
-+
-+/* Interleaved */
-+
-+#define AVDSL_TX_FIFO_ADDR1  (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000002C))
-+#define AVDSL_TX_FIFO_BASE1  (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000030))
-+#define AVDSL_TX_FIFO_LEN1   (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000034))
-+#define AVDSL_TX_FIFO_PR1    (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000038))
-+#define AVDSL_RX_FIFO_ADDR1  (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000003C))
-+#define AVDSL_RX_FIFO_BASE1  (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000040))
-+#define AVDSL_RX_FIFO_LEN1   (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000044))
-+#define AVDSL_RX_FIFO_PR1    (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000048))
-+
-+/*------------------------------------------*/
-+/* Broadband I/F                            */
-+/*------------------------------------------*/
-+
-+#define AVBBIF_BBIF_CNTRL    (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000000))
-+#define AVBBIF_ADDR_TRANS_0  (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000004))
-+#define AVBBIF_ADDR_TRANS_1  (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000008))
-+#define AVBBIF_ADDR_XB_MX_BL (*(volatile unsigned int *)(BBIF_CONTROL + 0x0000000C))
-+#define AVBBIF_INFIFO_LVL    (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000010))
-+#define AVBBIF_OUTFIFO_LVL   (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000014))
-+
-+#define AVBBIF_DISABLED    0x0
-+#define AVBBIF_LBT4040_INT 0x1
-+#define AVBBIF_XBUS        0x2
-+#define AVBBIF_LBT4040_EXT 0x4
-+
-+#define AVBBIF_ADDR_MASK0   0xff000000 /* handles upper bits of BBIF 0 address */
-+#define AVBBIF_ADDR_MASK1   0xff800000 /* handles upper bits of BBIF 1 address */
-+#define AVBBIF_TRANS_MASK   0xff000000
-+/*------------------------------------------*/
-+/* GPIO I/F                                 */
-+/*------------------------------------------*/
-+
-+#define GPIO_DATA_INPUT      (*(volatile unsigned int *)(GPIO_BASE + 0x00000000))
-+#define GPIO_DATA_OUTPUT     (*(volatile unsigned int *)(GPIO_BASE + 0x00000004))
-+#define GPIO_DATA_DIR        (*(volatile unsigned int *)(GPIO_BASE + 0x00000008)) /* 0=output 1=input  */
-+#define GPIO_DATA_ENABLE     (*(volatile unsigned int *)(GPIO_BASE + 0x0000000C)) /* 0=GPIO Mux 1=GPIO */
-+
-+#define GPIO_0 (1<<21)
-+#define GPIO_1 (1<<22)
-+#define GPIO_2 (1<<23)
-+#define GPIO_3 (1<<24)
-+#define EINT_1 (1<<18)
-+
-+/*
-+  JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
-+       If you reset the GPIO interface all of the directions (i/o) of the UART B
-+       interface pins are inputs and must be reconfigured so as not to lose the 
-+       serial console interface
-+  JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
-+*/
-+
-+/*------------------------------------------*/
-+/* CLK_CTRL                                 */
-+/*------------------------------------------*/
-+#define PERIPH_CLK_CTL       (*(volatile unsigned int *)(CLK_CTRL_BASE + 0x00000004))
-+
-+#define PCLK_0_HALF_VBUS     (0<<16)
-+#define PCLK_EQ_INPUT        (1<<16)
-+#define BBIF_CLK_HALF_VBUS   (0<<17)
-+#define BBIF_CLK_EQ_VBUS     (1<<17)
-+#define BBIF_CLK_EQ_BBCLK    (3<<17)
-+#define DSP_MODCLK_DSPCLKI   (0<<20)
-+#define DSP_MODCLK_REFCLKI   (1<<20)
-+#define USB_CLK_EQ_USBCLKI   (0<<21)
-+#define USB_CLK_EQ_REFCLKI   (1<<21)
-+
-+/*------------------------------------------*/
-+/* PCI Control Registers                    */
-+/*------------------------------------------*/
-+#define	PCIC_CONTROL		(*(volatile unsigned int *)(PCI_CONFIG_BASE))
-+#define		PCIC_CONTROL_CFG_DONE				(1<<0)
-+#define		PCIC_CONTROL_DIS_SLAVE_TO			(1<<1)
-+#define		PCIC_CONTROL_FORCE_DELAY_READ		(1<<2)
-+#define		PCIC_CONTROL_FORCE_DELAY_READ_LINE	(1<<3)
-+#define		PCIC_CONTROL_FORCE_DELAY_READ_MULT	(1<<4)
-+#define		PCIC_CONTROL_MEM_SPACE_EN			(1<<5)
-+#define		PCIC_CONTROL_MEM_MASK				(1<<6)
-+#define		PCIC_CONTROL_IO_SPACE_EN			(1<<7)
-+#define		PCIC_CONTROL_IO_MASK				(1<<8)
-+/*			PCIC_CONTROL_RESERVED				(1<<9)	*/
-+#define		PCIC_CONTROL_BASE0_EN				(1<<10)
-+#define		PCIC_CONTROL_BASE1_EN				(1<<11)
-+#define		PCIC_CONTROL_BASE2_EN				(1<<12)
-+#define		PCIC_CONTROL_HOLD_MASTER_WRITE		(1<<13)
-+#define		PCIC_CONTROL_ARBITER_EN				(1<<14)
-+#define	PCIC_INT_SOURCE		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000004))
-+#define		PCIC_INT_SOURCE_PWR_MGMT			(1<<0)
-+#define		PCIC_INT_SOURCE_PCI_TARGET			(1<<1)
-+#define		PCIC_INT_SOURCE_PCI_MASTER			(1<<2)
-+#define		PCIC_INT_SOURCE_POWER_WAKEUP		(1<<3)
-+#define		PCIC_INT_SOURCE_PMEIN				(1<<4)
-+/*			PCIC_INT_SOURCE_RESERVED			(1<<5) */
-+/*			PCIC_INT_SOURCE_RESERVED			(1<<6) */
-+#define		PCIC_INT_SOURCE_PIC_INTA			(1<<7)
-+#define		PCIC_INT_SOURCE_PIC_INTB			(1<<8)
-+#define		PCIC_INT_SOURCE_PIC_INTC			(1<<9)
-+#define		PCIC_INT_SOURCE_PIC_INTD			(1<<10)
-+#define		PCIC_INT_SOURCE_SOFT_INT0			(1<<11)
-+#define		PCIC_INT_SOURCE_SOFT_INT1			(1<<12)
-+#define		PCIC_INT_SOURCE_SOFT_INT2			(1<<13)
-+#define		PCIC_INT_SOURCE_SOFT_INT3			(1<<14)
-+#define	PCIC_INT_CLEAR		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000008))
-+#define		PCIC_INT_CLEAR_PM					(1<<0)
-+#define		PCIC_INT_CLEAR_PCI_TARGET			(1<<1)
-+#define		PCIC_INT_CLEAR_PCI_MASTER			(1<<2)
-+/*			PCIC_INT_CLEAR_RESERVED				(1<<3)	*/
-+#define		PCIC_INT_CLEAR_PMEIN				(1<<4)
-+/*			PCIC_INT_CLEAR_RESERVED				(1<<5)	*/
-+/*			PCIC_INT_CLEAR_RESERVED				(1<<6)	*/
-+#define		PCIC_INT_CLEAR_PCI_INTA				(1<<7)
-+#define		PCIC_INT_CLEAR_PCI_INTB				(1<<8)
-+#define		PCIC_INT_CLEAR_PCI_INTC				(1<<9)
-+#define		PCIC_INT_CLEAR_PCI_INTD				(1<<10)
-+#define		PCIC_INT_CLEAR_SOFT_INT0			(1<<11)
-+#define		PCIC_INT_CLEAR_SOFT_INT1			(1<<12)
-+#define		PCIC_INT_CLEAR_SOFT_INT2			(1<<13)
-+#define		PCIC_INT_CLEAR_SOFT_INT3			(1<<14)
-+#define	PCIC_INT_EN_AVAL	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000000c))
-+#define		PCIC_INT_EN_AVAL_PM					(1<<0)
-+#define		PCIC_INT_EN_AVAL_PCI_TARGET			(1<<1)
-+#define		PCIC_INT_EN_AVAL_PCI_MASTER			(1<<2)
-+/*			PCIC_INT_EN_AVAL_RESERVED			(1<<3)	*/
-+#define		PCIC_INT_EN_AVAL_PMEIN				(1<<4)
-+/*			PCIC_INT_EN_AVAL_RESERVED			(1<<5)	*/
-+/*			PCIC_INT_EN_AVAL_RESERVED			(1<<6)	*/
-+#define		PCIC_INT_EN_AVAL_PCI_INTA			(1<<7)
-+#define		PCIC_INT_EN_AVAL_PCI_INTB			(1<<8)
-+#define		PCIC_INT_EN_AVAL_PCI_INTC			(1<<9)
-+#define		PCIC_INT_EN_AVAL_PCI_INTD			(1<<10)
-+#define		PCIC_INT_EN_AVAL_SOFT_INT0			(1<<11)
-+#define		PCIC_INT_EN_AVAL_SOFT_INT1			(1<<12)
-+#define		PCIC_INT_EN_AVAL_SOFT_INT2			(1<<13)
-+#define		PCIC_INT_EN_AVAL_SOFT_INT3			(1<<14)
-+#define	PCIC_INT_EN_PCI			(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000010))
-+#define		PCIC_INT_EN_PCI_PM					(1<<0)
-+#define		PCIC_INT_EN_PCI_PCI_TARGET			(1<<1)
-+#define		PCIC_INT_EN_PCI_PCI_MASTER			(1<<2)
-+/*			PCIC_INT_EN_PCI_RESERVED			(1<<3)	*/
-+#define		PCIC_INT_EN_PCI_PMEIN				(1<<4)
-+/*			PCIC_INT_EN_PCI_RESERVED			(1<<5)	*/
-+/*			PCIC_INT_EN_PCI_RESERVED			(1<<6)	*/
-+#define		PCIC_INT_EN_PCI_PCI_INTA			(1<<7)
-+#define		PCIC_INT_EN_PCI_PCI_INTB			(1<<8)
-+#define		PCIC_INT_EN_PCI_PCI_INTC			(1<<9)
-+#define		PCIC_INT_EN_PCI_PCI_INTD			(1<<10)
-+#define		PCIC_INT_EN_PCI_SOFT_INT0			(1<<11)
-+#define		PCIC_INT_EN_PCI_SOFT_INT1			(1<<12)
-+#define		PCIC_INT_EN_PCI_SOFT_INT2			(1<<13)
-+#define		PCIC_INT_EN_PCI_SOFT_INT3			(1<<14)
-+#define	PCIC_INT_SWSET		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000014))
-+#define		PCIC_INT_SWSET_SOFT_INT0			(1<<0)
-+#define		PCIC_INT_SWSET_SOFT_INT1			(1<<1)
-+#define		PCIC_INT_SWSET_SOFT_INT2			(1<<2)
-+#define		PCIC_INT_SWSET_SOFT_INT3			(1<<3)
-+#define	PCIC_PM_CTL			(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000018))
-+#define		PCIC_PM_CTL_PWR_STATE_MASK			(0x02)
-+/*			PCIC_PM_CTL_RESERVED				(1<<2) */
-+/*			PCIC_PM_CTL_RESERVED				(1<<3) */
-+/*			PCIC_PM_CTL_RESERVED				(1<<4) */
-+/*			PCIC_PM_CTL_RESERVED				(1<<5) */
-+/*			PCIC_PM_CTL_RESERVED				(1<<6) */
-+/*			PCIC_PM_CTL_RESERVED				(1<<7) */
-+/*			PCIC_PM_CTL_RESERVED				(1<<8) */
-+/*			PCIC_PM_CTL_RESERVED				(1<<9) */
-+#define		PCIC_PM_CTL_PWR_SUPPORT				(1<<10)
-+#define		PCIC_PM_CTL_PMEIN					(1<<11)
-+#define		PCIC_PM_CTL_CAP_MASK	(*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x0000001a))
-+#define	PCIC_PM_CONSUME		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000001c))
-+#define		PCIC_PM_CONSUME_D0		(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001c))
-+#define		PCIC_PM_CONSUME_D1		(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001d))
-+#define		PCIC_PM_CONSUME_D2		(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001e))
-+#define		PCIC_PM_CONSUME_D3		(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001f))
-+#define	PCIC_PM_DISSAPATED	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000020))
-+#define		PCIC_PM_DISSAPATED_D0	(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000020))
-+#define		PCIC_PM_DISSAPATED_D1	(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000021))
-+#define		PCIC_PM_DISSAPATED_D2	(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000022))
-+#define		PCIC_PM_DISSAPATED_D3	(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000023))
-+#define	PCIC_PM_DATA_SCALE	(*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x00000024))
-+#define	PCIC_VEND_DEV_ID	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000028))
-+#define	PCIC_SUB_VEND_DEV_ID	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000002c))
-+#define	PCIC_CLASS_REV_ID	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000030))
-+#define	PCIC_MAX_MIN		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000034))
-+#define	PCIC_MAST_MEM_AT0	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000003c))
-+#define	PCIC_MAST_MEM_AT1	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000040))
-+#define	PCIC_MAST_MEM_AT2	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000044))
-+#define	PCIC_SLAVE_MASK0	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000004c))
-+#define	PCIC_SLAVE_MASK1	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000050))
-+#define	PCIC_SLAVE_MASK2	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000054))
-+#define	PCIC_SLAVE_BASE_AT0	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000058))
-+#define	PCIC_SLAVE_BASE_AT1	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000005c))
-+#define	PCIC_SLAVE_BASE_AT2	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000060))
-+#define	PCIC_CONF_COMMAND	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000090))
-+#define	PCIC_CONF_ADDR		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000094))
-+#define	PCIC_CONF_DATA		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000098))
-+
-+/*------------------------------------------*/
-+/* IIC_INTERFACE                            */
-+/*------------------------------------------*/
-+#define I2C_DATA_HI          (*(volatile unsigned int *)(I2C_BASE + 0x0))
-+#define I2C_DATA_LOW         (*(volatile unsigned int *)(I2C_BASE + 0x4))
-+#define I2C_CONFIG           (*(volatile unsigned int *)(I2C_BASE + 0x8))
-+#define I2C_DATA_READ        (*(volatile unsigned int *)(I2C_BASE + 0xC))
-+#define I2C_CLOCK_DIV        (*(volatile unsigned int *)(I2C_BASE + 0x10))
-+
-+#define I2CWRITE      0x200
-+#define I2CREAD       0x300
-+#define I2C_END_BURST 0x400
-+
-+/* read bits */
-+#define I2C_READ_ERROR    0x8000
-+#define I2C_READ_COMPLETE 0x4000
-+#define I2C_READ_BUSY     0x2000
-+
-+/* device types */
-+#define I2C_IO_EXPANDER      0x2
-+#define I2C_RTC              0xd
-+
-+/* device Addresses on I2C bus (EVM3) */
-+#define SEVEN_SEGMENT_DISP    0x23   /* Device type = 0x2, Addr = 3 */
-+#define EVM3_RTC              0xd0   /* Device type = 0xd, Addr = 0 */
-+#define EVM3_RTC_I2C_ADDR      0x0
-+
-+/*------------------------------------------*/
-+/* Ethernet MAC register offset definitions */
-+/*------------------------------------------*/
-+#define VMAC_DMACONFIG(X)      (*(volatile unsigned int *)(X + 0x00000000))
-+#define VMAC_INTSTS(X)         (*(volatile unsigned int *)(X + 0x00000004))
-+#define VMAC_INTMASK(X)        (*(volatile unsigned int *)(X + 0x00000008))
-+
-+#define VMAC_WRAPCLK(X)        (*(volatile unsigned int *)(X + 0x00000340))
-+#define VMAC_STATSBASE(X)      (*(volatile unsigned int *)(X + 0x00000400))
-+ 
-+#define VMAC_TCRPTR(X)         (*(volatile unsigned int *)(X + 0x00000100))
-+#define VMAC_TCRSIZE(X)        (*(volatile unsigned int *)(X + 0x00000104))
-+#define VMAC_TCRINTTHRESH(X)   (*(volatile unsigned int *)(X + 0x00000108))
-+#define VMAC_TCRTOTENT(X)      (*(volatile unsigned int *)(X + 0x0000010C))
-+#define VMAC_TCRFREEENT(X)     (*(volatile unsigned int *)(X + 0x00000110))
-+#define VMAC_TCRPENDENT(X)     (*(volatile unsigned int *)(X + 0x00000114))
-+#define VMAC_TCRENTINC(X)      (*(volatile unsigned int *)(X + 0x00000118))
-+#define VMAC_TXISRPACE(X)      (*(volatile unsigned int *)(X + 0x0000011c))
-+
-+
-+#define VMAC_TDMASTATE0(X)     (*(volatile unsigned int *)(X + 0x00000120))
-+#define VMAC_TDMASTATE1(X)     (*(volatile unsigned int *)(X + 0x00000124))
-+#define VMAC_TDMASTATE2(X)     (*(volatile unsigned int *)(X + 0x00000128))
-+#define VMAC_TDMASTATE3(X)     (*(volatile unsigned int *)(X + 0x0000012C))
-+#define VMAC_TDMASTATE4(X)     (*(volatile unsigned int *)(X + 0x00000130))
-+#define VMAC_TDMASTATE5(X)     (*(volatile unsigned int *)(X + 0x00000134))
-+#define VMAC_TDMASTATE6(X)     (*(volatile unsigned int *)(X + 0x00000138))
-+#define VMAC_TDMASTATE7(X)     (*(volatile unsigned int *)(X + 0x0000013C))
-+#define VMAC_TXPADDCNT(X)      (*(volatile unsigned int *)(X + 0x00000140))
-+#define VMAC_TXPADDSTART(X)    (*(volatile unsigned int *)(X + 0x00000144))
-+#define VMAC_TXPADDEND(X)      (*(volatile unsigned int *)(X + 0x00000148))
-+#define VMAC_TXQFLUSH(X)       (*(volatile unsigned int *)(X + 0x0000014C))
-+ 
-+#define VMAC_RCRPTR(X)         (*(volatile unsigned int *)(X + 0x00000200))
-+#define VMAC_RCRSIZE(X)        (*(volatile unsigned int *)(X + 0x00000204))
-+#define VMAC_RCRINTTHRESH(X)   (*(volatile unsigned int *)(X + 0x00000208))
-+#define VMAC_RCRTOTENT(X)      (*(volatile unsigned int *)(X + 0x0000020C))
-+#define VMAC_RCRFREEENT(X)     (*(volatile unsigned int *)(X + 0x00000210))
-+#define VMAC_RCRPENDENT(X)     (*(volatile unsigned int *)(X + 0x00000214))
-+#define VMAC_RCRENTINC(X)      (*(volatile unsigned int *)(X + 0x00000218))
-+#define VMAC_RXISRPACE(X)      (*(volatile unsigned int *)(X + 0x0000021c))
-+
-+#define VMAC_RDMASTATE0(X)     (*(volatile unsigned int *)(X + 0x00000220))
-+#define VMAC_RDMASTATE1(X)     (*(volatile unsigned int *)(X + 0x00000224))
-+#define VMAC_RDMASTATE2(X)     (*(volatile unsigned int *)(X + 0x00000228))
-+#define VMAC_RDMASTATE3(X)     (*(volatile unsigned int *)(X + 0x0000022C))
-+#define VMAC_RDMASTATE4(X)     (*(volatile unsigned int *)(X + 0x00000230))
-+#define VMAC_RDMASTATE5(X)     (*(volatile unsigned int *)(X + 0x00000234))
-+#define VMAC_RDMASTATE6(X)     (*(volatile unsigned int *)(X + 0x00000238))
-+#define VMAC_RDMASTATE7(X)     (*(volatile unsigned int *)(X + 0x0000023C))
-+#define VMAC_FBLADDCNT(X)      (*(volatile unsigned int *)(X + 0x00000240))
-+#define VMAC_FBLADDSTART(X)    (*(volatile unsigned int *)(X + 0x00000244))
-+#define VMAC_FBLADDEND(X)      (*(volatile unsigned int *)(X + 0x00000248))
-+#define VMAC_RXONOFF(X)        (*(volatile unsigned int *)(X + 0x0000024C))
-+ 
-+#define VMAC_FBL0NEXTD(X)      (*(volatile unsigned int *)(X + 0x00000280))
-+#define VMAC_FBL0LASTD(X)      (*(volatile unsigned int *)(X + 0x00000284))
-+#define VMAC_FBL0COUNTD(X)     (*(volatile unsigned int *)(X + 0x00000288))
-+#define VMAC_FBL0BUFSIZE(X)    (*(volatile unsigned int *)(X + 0x0000028C))
-+ 
-+#define VMAC_MACCONTROL(X)     (*(volatile unsigned int *)(X + 0x00000300))
-+#define VMAC_MACSTATUS(X)      (*(volatile unsigned int *)(X + 0x00000304))
-+#define VMAC_MACADDRHI(X)      (*(volatile unsigned int *)(X + 0x00000308))
-+#define VMAC_MACADDRLO(X)      (*(volatile unsigned int *)(X + 0x0000030C))
-+#define VMAC_MACHASH1(X)       (*(volatile unsigned int *)(X + 0x00000310))
-+#define VMAC_MACHASH2(X)       (*(volatile unsigned int *)(X + 0x00000314))
-+ 
-+#define VMAC_WRAPCLK(X)        (*(volatile unsigned int *)(X + 0x00000340))
-+#define VMAC_BOFTEST(X)        (*(volatile unsigned int *)(X + 0x00000344))
-+#define VMAC_PACTEST(X)        (*(volatile unsigned int *)(X + 0x00000348))
-+#define VMAC_PAUSEOP(X)        (*(volatile unsigned int *)(X + 0x0000034C))
-+ 
-+#define VMAC_MDIOCONTROL(X)    (*(volatile unsigned int *)(X + 0x00000380))
-+#define VMAC_MDIOUSERACCESS(X) (*(volatile unsigned int *)(X +0x00000384))
-+#define VMAC_MDIOACK(X)        (*(volatile unsigned int *)(X + 0x00000388))
-+#define VMAC_MDIOLINK(X)       (*(volatile unsigned int *)(X + 0x0000038C))
-+#define VMAC_MDIOMACPHY(X)     (*(volatile unsigned int *)(X + 0x00000390))
-+
-+#define VMAC_STATS_BASE(X)     (X + 0x00000400)
-+
-+#endif __AVALANCHE_REGS_H
-+
-+
-+
-+
-+
-+
-diff -urN linux.old/include/asm-mips/ar7/avalanche_types.h linux.dev/include/asm-mips/ar7/avalanche_types.h
---- linux.old/include/asm-mips/ar7/avalanche_types.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/avalanche_types.h	2005-11-10 01:10:46.071588750 +0100
-@@ -0,0 +1,126 @@
-+/*------------------------------------------------------------------------------------------*\
-+\*------------------------------------------------------------------------------------------*/
-+#ifndef _avalanche_types_h_
-+#define _avalanche_types_h_
-+
-+/*--- #include <asm/avalanche/generic/hal_modules/haltypes.h> ---*/
-+#ifndef TRUE
-+#define TRUE 1
-+#endif
-+#ifndef FALSE
-+#define FALSE 0
-+#endif
-+#ifndef NULL
-+#define NULL (void *)0
-+#endif
-+
-+/*------------------------------------------------------------------------------------------*\
-+ * Typen für Texas GPL Module
-+\*------------------------------------------------------------------------------------------*/
-+#ifndef __UINT8_T__
-+typedef unsigned char   UINT8;
-+#define __UINT8_T__
-+#endif
-+
-+#ifndef __UCHAR_T__
-+typedef unsigned char   UCHAR;
-+#define __UCHAR_T__
-+#endif
-+
-+#ifndef __INT8_T__
-+typedef signed char     INT8;
-+#define __INT8_T__
-+#endif
-+
-+#ifndef __UINT16_T__
-+typedef unsigned short  UINT16;
-+#define __UINT16_T__
-+#endif
-+
-+#ifndef __USHORT_T__
-+typedef unsigned short  USHORT;
-+#define __USHORT_T__
-+#endif
-+
-+#ifndef __INT16_T__
-+typedef signed short    INT16;
-+#define __INT16_T__
-+#endif
-+
-+#ifndef __UINT32_T__
-+typedef unsigned int    UINT32;
-+#define __UINT32_T__
-+#endif
-+
-+#ifndef __UINT_T__
-+typedef unsigned int    UINT;
-+#define __UINT_T__
-+#endif
-+
-+#ifndef __INT32_T__
-+typedef signed int      INT32;
-+#define __INT32_T__
-+#endif
-+
-+#ifndef __ULONG_T__
-+typedef unsigned long   ULONG;
-+#define __ULONG_T__
-+#endif
-+
-+#ifndef __BOOL_T__
-+typedef int             BOOL;
-+#define __BOOL_T__
-+#endif
-+
-+#ifndef __STATUS_T__
-+typedef int             STATUS;
-+#define __STATUS_T__
-+#endif
-+
-+/*------------------------------------------------------------------------------------------*\
-+\*------------------------------------------------------------------------------------------*/
-+typedef void (*p_vlynq_intr_cntrl_isr_t)(void *,void *,void *);
-+typedef INT32 (*p_vlynq_interrupt_vector_set_t)(void *, UINT32, UINT32, INT32, INT32, INT32);
-+typedef INT32 (*p_vlynq_interrupt_vector_cntl_t)(void *, UINT32, INT32, UINT32);
-+typedef UINT32 (*p_vlynq_interrupt_get_count_t)(void *, UINT32);
-+typedef INT32 (*p_vlynq_install_isr_t)(void *, UINT32, p_vlynq_intr_cntrl_isr_t, void *, void *, void *);
-+typedef INT32 (*p_vlynq_uninstall_isr_t)(void *, UINT32, void *, void *, void *);
-+typedef void (*p_vlynq_root_isr_t)(void *);
-+typedef void (*p_vlynq_delay_t)(UINT32);
-+typedef INT32 (*p_vlynq_interrupt_vector_map_t)(void *, INT32, UINT32, UINT32);
-+typedef INT32 (*p_vlynq_interrupt_set_polarity_t)(void *, INT32, UINT32, INT32); 
-+typedef INT32 (*p_vlynq_interrupt_get_polarity_t)(void *, INT32, UINT32);
-+typedef INT32 (*p_vlynq_interrupt_set_type_t)(void *, INT32, UINT32, INT32);
-+typedef INT32 (*p_vlynq_interrupt_get_type_t)(void *, INT32, UINT32);
-+typedef INT32 (*p_vlynq_interrupt_enable_t)(void *, INT32, UINT32);
-+typedef INT32 (*p_vlynq_interrupt_disable_t)(void *, INT32, UINT32);
-+                 
-+/*------------------------------------------------------------------------------------------*\
-+\*------------------------------------------------------------------------------------------*/
-+extern p_vlynq_interrupt_vector_set_t p_vlynq_interrupt_vector_set;
-+extern p_vlynq_interrupt_vector_cntl_t p_vlynq_interrupt_vector_cntl;
-+extern p_vlynq_interrupt_get_count_t p_vlynq_interrupt_get_count;
-+extern p_vlynq_install_isr_t p_vlynq_install_isr;
-+extern p_vlynq_uninstall_isr_t p_vlynq_uninstall_isr;
-+extern p_vlynq_root_isr_t p_vlynq_root_isr;
-+extern p_vlynq_delay_t p_vlynq_delay;
-+extern p_vlynq_interrupt_vector_map_t p_vlynq_interrupt_vector_map;
-+extern p_vlynq_interrupt_set_polarity_t p_vlynq_interrupt_set_polarity;
-+extern p_vlynq_interrupt_get_polarity_t p_vlynq_interrupt_get_polarity;
-+extern p_vlynq_interrupt_set_type_t p_vlynq_interrupt_set_type;
-+extern p_vlynq_interrupt_get_type_t p_vlynq_interrupt_get_type;
-+extern p_vlynq_interrupt_enable_t p_vlynq_interrupt_enable;
-+extern p_vlynq_interrupt_disable_t p_vlynq_interrupt_disable;
-+extern void *p_vlynqDevice0;
-+extern void *p_vlynqDevice1;
-+
-+/*------------------------------------------------------------------------------------------*\
-+\*------------------------------------------------------------------------------------------*/
-+enum _avalanche_need_ {
-+    avalanche_need_vlynq,
-+    avalanche_need_auto_mdix
-+};
-+
-+int avalanche_need(enum _avalanche_need_);
-+
-+#endif /*--- #ifndef _avalanche_types_h_ ---*/
-diff -urN linux.old/include/asm-mips/ar7/if_port.h linux.dev/include/asm-mips/ar7/if_port.h
---- linux.old/include/asm-mips/ar7/if_port.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/if_port.h	2005-11-10 01:10:46.071588750 +0100
-@@ -0,0 +1,26 @@
-+/*******************************************************************************   
-+ * FILE PURPOSE:    Interface port id Header file                                      
-+ *******************************************************************************   
-+ * FILE NAME:       if_port.h                                                   
-+ *                                                                                 
-+ * DESCRIPTION:     Header file carrying information about port ids of interfaces                             
-+ *                                                                                 
-+ *                                                                                 
-+ * (C) Copyright 2003, Texas Instruments, Inc                                      
-+ ******************************************************************************/   
-+#ifndef _IF_PORT_H_
-+#define _IF_PORT_H_
-+
-+#define AVALANCHE_CPMAC_LOW_PORT_ID         0
-+#define AVALANCHE_CPMAC_HIGH_PORT_ID        1    
-+#define AVALANCHE_USB_PORT_ID               2
-+#define AVALANCHE_WLAN_PORT_ID              3
-+
-+
-+#define AVALANCHE_MARVELL_BASE_PORT_ID      4
-+
-+/* The marvell ports occupy port ids from  4 to 8 */
-+/* so the next port id number should start at 9   */
-+
-+
-+#endif /* _IF_PORT_H_ */
-diff -urN linux.old/include/asm-mips/ar7/sangam.h linux.dev/include/asm-mips/ar7/sangam.h
---- linux.old/include/asm-mips/ar7/sangam.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/sangam.h	2005-11-10 01:10:46.071588750 +0100
-@@ -0,0 +1,180 @@
-+#ifndef _SANGAM_H_
-+#define _SANGAM_H_
-+
-+#include <linux/config.h>
-+#include <asm/addrspace.h>
-+
-+/*----------------------------------------------------
-+ * Sangam's Module Base Addresses
-+ *--------------------------------------------------*/
-+#define AVALANCHE_ADSL_SUB_SYS_MEM_BASE       (KSEG1ADDR(0x01000000)) /* AVALANCHE ADSL Mem Base */
-+#define AVALANCHE_BROADBAND_INTERFACE__BASE   (KSEG1ADDR(0x02000000)) /* AVALANCHE BBIF */        
-+#define AVALANCHE_ATM_SAR_BASE                (KSEG1ADDR(0x03000000)) /* AVALANCHE ATM SAR */
-+#define AVALANCHE_USB_SLAVE_BASE              (KSEG1ADDR(0x03400000)) /* AVALANCHE USB SLAVE */
-+#define AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE      (KSEG1ADDR(0x04000000)) /* AVALANCHE VLYNQ 0 Mem map */
-+#define AVALANCHE_LOW_CPMAC_BASE              (KSEG1ADDR(0x08610000)) /* AVALANCHE CPMAC 0 */
-+#define AVALANCHE_EMIF_CONTROL_BASE           (KSEG1ADDR(0x08610800)) /* AVALANCHE EMIF */
-+#define AVALANCHE_GPIO_BASE                   (KSEG1ADDR(0x08610900)) /* AVALANCHE GPIO */
-+#define AVALANCHE_CLOCK_CONTROL_BASE          (KSEG1ADDR(0x08610A00)) /* AVALANCHE Clock Control */
-+#define AVALANCHE_WATCHDOG_TIMER_BASE         (KSEG1ADDR(0x08610B00)) /* AVALANCHE Watch Dog Timer */  
-+#define AVALANCHE_TIMER0_BASE                 (KSEG1ADDR(0x08610C00)) /* AVALANCHE Timer 1 */  
-+#define AVALANCHE_TIMER1_BASE                 (KSEG1ADDR(0x08610D00)) /* AVALANCHE Timer 2 */  
-+#define AVALANCHE_UART0_REGS_BASE             (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */
-+#define AVALANCHE_UART1_REGS_BASE             (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 0 */
-+#define AVALANCHE_I2C_BASE                    (KSEG1ADDR(0x08611000)) /* AVALANCHE I2C */
-+#define AVALANCHE_USB_SLAVE_CONTROL_BASE      (KSEG1ADDR(0x08611200)) /* AVALANCHE USB DMA */
-+#define AVALANCHE_MCDMA0_CTRL_BASE            (KSEG1ADDR(0x08611400)) /* AVALANCHE MC DMA 0 (channels 0-3) */
-+#define AVALANCHE_RESET_CONTROL_BASE          (KSEG1ADDR(0x08611600)) /* AVALANCHE Reset Control */
-+#define AVALANCHE_BIST_CONTROL_BASE           (KSEG1ADDR(0x08611700)) /* AVALANCHE BIST Control */
-+#define AVALANCHE_LOW_VLYNQ_CONTROL_BASE      (KSEG1ADDR(0x08611800)) /* AVALANCHE VLYNQ0 Control */
-+#define AVALANCHE_DEVICE_CONFIG_LATCH_BASE    (KSEG1ADDR(0x08611A00)) /* AVALANCHE Device Config Latch */
-+#define AVALANCHE_HIGH_VLYNQ_CONTROL_BASE     (KSEG1ADDR(0x08611C00)) /* AVALANCHE VLYNQ1 Control */
-+#define AVALANCHE_MDIO_BASE                   (KSEG1ADDR(0x08611E00)) /* AVALANCHE MDIO    */
-+#define AVALANCHE_FSER_BASE                   (KSEG1ADDR(0x08612000)) /* AVALANCHE FSER base */
-+#define AVALANCHE_INTC_BASE                   (KSEG1ADDR(0x08612400)) /* AVALANCHE INTC  */
-+#define AVALANCHE_HIGH_CPMAC_BASE             (KSEG1ADDR(0x08612800)) /* AVALANCHE CPMAC 1 */
-+#define AVALANCHE_HIGH_VLYNQ_MEM_MAP_BASE     (KSEG1ADDR(0x0C000000)) /* AVALANCHE VLYNQ 1 Mem map */
-+
-+#define AVALANCHE_SDRAM_BASE                  0x14000000UL
-+
-+
-+/*----------------------------------------------------
-+ * Sangam Interrupt Map (Primary Interrupts)
-+ *--------------------------------------------------*/
-+
-+#define AVALANCHE_UNIFIED_SECONDARY_INT            0
-+#define AVALANCHE_EXT_INT_0                        1
-+#define AVALANCHE_EXT_INT_1                        2
-+/* Line#  3 to 4 are reserved                            */
-+#define AVALANCHE_TIMER_0_INT                      5
-+#define AVALANCHE_TIMER_1_INT                      6
-+#define AVALANCHE_UART0_INT                        7
-+#define AVALANCHE_UART1_INT                        8
-+#define AVALANCHE_DMA_INT0                         9
-+#define AVALANCHE_DMA_INT1                        10
-+/* Line# 11 to 14 are reserved                    */
-+#define AVALANCHE_ATM_SAR_INT                     15
-+/* Line# 16 to 18 are reserved                    */
-+#define AVALANCHE_LOW_CPMAC_INT                   19
-+/* Line# 20 is reserved                           */
-+#define AVALANCHE_LOW_VLYNQ_INT                   21
-+#define AVALANCHE_CODEC_WAKEUP_INT                22
-+/* Line# 23 is reserved                           */
-+#define AVALANCHE_USB_SLAVE_INT                   24
-+#define AVALANCHE_HIGH_VLYNQ_INT                  25
-+/* Line# 26 to 27 are reserved                    */
-+#define AVALANCHE_UNIFIED_PHY_INT                 28
-+#define AVALANCHE_I2C_INT                         29
-+#define AVALANCHE_DMA_INT2                        30
-+#define AVALANCHE_DMA_INT3                        31
-+/* Line# 32 is reserved                           */
-+#define AVALANCHE_HIGH_CPMAC_INT                  33
-+/* Line# 34 to 36 is reserved                     */
-+#define AVALANCHE_VDMA_VT_RX_INT                  37
-+#define AVALANCHE_VDMA_VT_TX_INT                  38
-+#define AVALANCHE_ADSL_SUB_SYSTEM_INT             39
-+
-+
-+#define AVALANCHE_EMIF_INT                        47
-+
-+
-+
-+/*-----------------------------------------------------------
-+ * Sangam's Reset Bits
-+ *---------------------------------------------------------*/
-+
-+#define AVALANCHE_UART0_RESET_BIT                  0
-+#define AVALANCHE_UART1_RESET_BIT                  1
-+#define AVALANCHE_I2C_RESET_BIT                    2
-+#define AVALANCHE_TIMER0_RESET_BIT                 3
-+#define AVALANCHE_TIMER1_RESET_BIT                 4
-+/* Reset bit  5 is reserved.                       */
-+#define AVALANCHE_GPIO_RESET_BIT                   6
-+#define AVALANCHE_ADSL_SUB_SYS_RESET_BIT           7
-+#define AVALANCHE_USB_SLAVE_RESET_BIT              8
-+#define AVALANCHE_ATM_SAR_RESET_BIT                9
-+/* Reset bit 10 is reserved.                      */
-+#define AVALANCHE_VDMA_VT_RESET_BIT               11
-+#define AVALANCHE_FSER_RESET_BIT                  12
-+/* Reset bit 13 to 15 are reserved                */
-+#define AVALANCHE_HIGH_VLYNQ_RESET_BIT            16
-+#define AVALANCHE_LOW_CPMAC_RESET_BIT             17
-+#define AVALANCHE_MCDMA_RESET_BIT                 18
-+#define AVALANCHE_BIST_RESET_BIT                  19
-+#define AVALANCHE_LOW_VLYNQ_RESET_BIT             20
-+#define AVALANCHE_HIGH_CPMAC_RESET_BIT            21
-+#define AVALANCHE_MDIO_RESET_BIT                  22
-+#define AVALANCHE_ADSL_SUB_SYS_DSP_RESET_BIT      23
-+/* Reset bit 24 to 25 are reserved                */
-+#define AVALANCHE_LOW_EPHY_RESET_BIT              26
-+/* Reset bit 27 to 31 are reserved                */
-+
-+
-+#define AVALANCHE_POWER_MODULE_USBSP               0
-+#define AVALANCHE_POWER_MODULE_WDTP                1
-+#define AVALANCHE_POWER_MODULE_UT0P                2
-+#define AVALANCHE_POWER_MODULE_UT1P                3
-+#define AVALANCHE_POWER_MODULE_IICP                4
-+#define AVALANCHE_POWER_MODULE_VDMAP               5
-+#define AVALANCHE_POWER_MODULE_GPIOP               6
-+#define AVALANCHE_POWER_MODULE_VLYNQ1P             7
-+#define AVALANCHE_POWER_MODULE_SARP                8
-+#define AVALANCHE_POWER_MODULE_ADSLP               9
-+#define AVALANCHE_POWER_MODULE_EMIFP              10
-+#define AVALANCHE_POWER_MODULE_ADSPP              12
-+#define AVALANCHE_POWER_MODULE_RAMP               13
-+#define AVALANCHE_POWER_MODULE_ROMP               14
-+#define AVALANCHE_POWER_MODULE_DMAP               15
-+#define AVALANCHE_POWER_MODULE_BISTP              16
-+#define AVALANCHE_POWER_MODULE_TIMER0P            18
-+#define AVALANCHE_POWER_MODULE_TIMER1P            19
-+#define AVALANCHE_POWER_MODULE_EMAC0P             20
-+#define AVALANCHE_POWER_MODULE_EMAC1P             22
-+#define AVALANCHE_POWER_MODULE_EPHYP              24
-+#define AVALANCHE_POWER_MODULE_VLYNQ0P            27
-+
-+
-+
-+
-+
-+/*
-+ * Sangam board vectors
-+ */
-+
-+#define AVALANCHE_VECS       (KSEG1ADDR(AVALANCHE_SDRAM_BASE))
-+#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE))
-+
-+/*-----------------------------------------------------------------------------
-+ * Sangam's system register.
-+ * 
-+ *---------------------------------------------------------------------------*/
-+#define AVALANCHE_DCL_BOOTCR          (KSEG1ADDR(0x08611A00))
-+#define AVALANCHE_EMIF_SDRAM_CFG      (AVALANCHE_EMIF_CONTROL_BASE + 0x8)
-+#define AVALANCHE_RST_CTRL_PRCR       (KSEG1ADDR(0x08611600))
-+#define AVALANCHE_RST_CTRL_SWRCR      (KSEG1ADDR(0x08611604))
-+#define AVALANCHE_RST_CTRL_RSR        (KSEG1ADDR(0x08611600))
-+
-+#define AVALANCHE_POWER_CTRL_PDCR     (KSEG1ADDR(0x08610A00))
-+#define AVALANCHE_WAKEUP_CTRL_WKCR    (KSEG1ADDR(0x08610A0C))
-+
-+#define AVALANCHE_GPIO_DATA_IN        (AVALANCHE_GPIO_BASE +  0x0)
-+#define AVALANCHE_GPIO_DATA_OUT       (AVALANCHE_GPIO_BASE +  0x4)
-+#define AVALANCHE_GPIO_DIR            (AVALANCHE_GPIO_BASE +  0x8)    
-+#define AVALANCHE_GPIO_ENBL           (AVALANCHE_GPIO_BASE +  0xC)
-+#define AVALANCHE_CVR                 (AVALANCHE_GPIO_BASE +  0x14)
-+
-+/*
-+ * Yamon Prom print address.
-+ */
-+#define AVALANCHE_YAMON_FUNCTION_BASE             (KSEG1ADDR(0x10000500))
-+#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR     (AVALANCHE_YAMON_FUNCTION_BASE + 0x4)  /* print_count function */
-+#define AVALANCHE_YAMON_PROM_PRINT_ADDR           (AVALANCHE_YAMON_FUNCTION_BASE + 0x34)
-+
-+#define AVALANCHE_BASE_BAUD       ( 3686400 / 16 )
-+
-+#define  AVALANCHE_GPIO_PIN_COUNT         32             
-+#define  AVALANCHE_GPIO_OFF_MAP           {0xF34FFFC0} 
-+
-+#include "sangam_boards.h"
-+
-+#endif /*_SANGAM_H_ */
-diff -urN linux.old/include/asm-mips/ar7/sangam_boards.h linux.dev/include/asm-mips/ar7/sangam_boards.h
---- linux.old/include/asm-mips/ar7/sangam_boards.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/sangam_boards.h	2005-11-10 01:10:46.071588750 +0100
-@@ -0,0 +1,77 @@
-+#ifndef _SANGAM_BOARDS_H
-+#define _SANGAM_BOARDS_H
-+
-+// Let us define board specific information here. 
-+
-+
-+#if defined(CONFIG_AR7DB)
-+
-+#define AFECLK_FREQ                                 35328000
-+#define REFCLK_FREQ                                 25000000
-+#define OSC3_FREQ                                   24000000
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK                0x80000000
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x55555555  
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0x80000000
-+
-+#endif
-+
-+
-+#if defined(CONFIG_AR7RD)
-+#define AFECLK_FREQ                                 35328000
-+#define REFCLK_FREQ                                 25000000
-+#define OSC3_FREQ                                   24000000
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK                0x80000000
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x2
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0x80000000
-+#endif
-+
-+
-+#if defined(CONFIG_AR7WI)
-+#define AFECLK_FREQ                                 35328000
-+#define REFCLK_FREQ                                 25000000
-+#define OSC3_FREQ                                   24000000
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK                0x80000000
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x2
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0x80000000
-+#endif
-+
-+
-+#if defined(CONFIG_AR7V)
-+#define AFECLK_FREQ                                 35328000
-+#define REFCLK_FREQ                                 25000000
-+#define OSC3_FREQ                                   24000000
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK                0x80000000
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x2
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0x80000000
-+#endif
-+
-+
-+#if defined(CONFIG_AR7WRD) 
-+#define AFECLK_FREQ                                 35328000
-+#define REFCLK_FREQ                                 25000000
-+#define OSC3_FREQ                                   24000000
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK                0x80000000
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x00010000
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0x80000000
-+#endif
-+
-+
-+#if defined(CONFIG_AR7VWI) 
-+#define AFECLK_FREQ                                 35328000
-+#define REFCLK_FREQ                                 25000000
-+#define OSC3_FREQ                                   24000000
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK                0x80000000
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x00010000
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0x80000000
-+#endif
-+
-+
-+#if defined CONFIG_SEAD2
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK                0xAAAAAAAA
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x55555555
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0
-+#include <asm/mips-boards/sead.h>
-+#endif
-+
-+
-+#endif
-diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ar7/tnetd73xx.h
---- linux.old/include/asm-mips/ar7/tnetd73xx.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/tnetd73xx.h	2005-11-10 01:10:46.075589000 +0100
-@@ -0,0 +1,338 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    TNETD73xx Common Header File
-+ ******************************************************************************
-+ * FILE NAME:       tnetd73xx.h
-+ *
-+ * DESCRIPTION:     shared typedef's, constants and API for TNETD73xx
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - PSP TII  
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+/*
-+ *
-+ *
-+ *   These are const, typedef, and api definitions for tnetd73xx.
-+ *
-+ *   NOTES:
-+ *   1. This file may be included into both C and Assembly files.
-+ *       - for .s files, please do #define _ASMLANGUAGE in your ASM file to
-+ *           avoid C data types (typedefs) below;
-+ *       - for .c files, you don't have to do anything special.
-+ *
-+ *   2. This file has a number of sections for each SOC subsystem. When adding
-+ *       a new constant, find the subsystem you are working on and follow the
-+ *       name pattern. If you are adding another typedef for your interface, please,
-+ *       place it with other typedefs and function prototypes.
-+ *
-+ *   3. Please, DO NOT add any macros or types that are local to a subsystem to avoid
-+ *       cluttering. Include such items directly into the module's .c file or have a
-+ *       local .h file to pass data between smaller modules. This file defines only
-+ *       shared items.
-+ */
-+
-+#ifndef __TNETD73XX_H__
-+#define __TNETD73XX_H__
-+
-+#ifndef _ASMLANGUAGE        /* This part not for assembly language */
-+
-+extern unsigned int tnetd73xx_mips_freq;
-+extern unsigned int tnetd73xx_vbus_freq;
-+
-+#include "tnetd73xx_err.h"
-+
-+#endif /* _ASMLANGUAGE */
-+
-+
-+/*******************************************************************************************
-+*   Emerald core specific
-+******************************************************************************************** */
-+
-+#ifdef  BIG_ENDIAN
-+#elif defined(LITTLE_ENDIAN)
-+#else
-+#error Need to define endianism
-+#endif
-+
-+#ifndef KSEG_MSK
-+#define KSEG_MSK                    0xE0000000 /* Most significant 3 bits denote kseg choice */
-+#endif
-+
-+#ifndef KSEG_INV_MASK
-+#define KSEG_INV_MASK               0x1FFFFFFF /* Inverted mask for kseg address */
-+#endif
-+
-+#ifndef KSEG0_BASE
-+#define KSEG0_BASE                  0x80000000
-+#endif
-+
-+#ifndef KSEG1_BASE
-+#define KSEG1_BASE                  0xA0000000
-+#endif
-+
-+#ifndef KSEG0
-+#define KSEG0(addr)                 (((__u32)(addr) & ~KSEG_MSK) | KSEG0_BASE)
-+#endif
-+
-+#ifndef KSEG1
-+#define KSEG1(addr)                 (((__u32)(addr) & ~KSEG_MSK) | KSEG1_BASE)
-+#endif
-+
-+#ifndef KUSEG
-+#define KUSEG(addr)                 ((__u32)(addr) & ~KSEG_MSK)
-+#endif
-+
-+#ifndef PHYS_ADDR
-+#define PHYS_ADDR(addr)             ((addr) & KSEG_INV_MASK)
-+#endif
-+
-+#ifndef PHYS_TO_K0
-+#define PHYS_TO_K0(addr)            (PHYS_ADDR(addr)|KSEG0_BASE)
-+#endif
-+
-+#ifndef PHYS_TO_K1
-+#define PHYS_TO_K1(addr)            (PHYS_ADDR(addr)|KSEG1_BASE)
-+#endif
-+
-+#ifndef REG8_ADDR
-+#define REG8_ADDR(addr)             (volatile __u8 *)(PHYS_TO_K1(addr))
-+#define REG8_DATA(addr)             (*(volatile __u8 *)(PHYS_TO_K1(addr)))
-+#define REG8_WRITE(addr, data)      REG8_DATA(addr) = data;
-+#define REG8_READ(addr, data)       data = (__u8) REG8_DATA(addr);
-+#endif
-+
-+#ifndef REG16_ADDR
-+#define REG16_ADDR(addr)            (volatile __u16 *)(PHYS_TO_K1(addr))
-+#define REG16_DATA(addr)            (*(volatile __u16 *)(PHYS_TO_K1(addr)))
-+#define REG16_WRITE(addr, data)     REG16_DATA(addr) = data;
-+#define REG16_READ(addr, data)      data = (__u16) REG16_DATA(addr);
-+#endif
-+
-+#ifndef REG32_ADDR
-+#define REG32_ADDR(addr)            (volatile __u32 *)(PHYS_TO_K1(addr))
-+#define REG32_DATA(addr)            (*(volatile __u32 *)(PHYS_TO_K1(addr)))
-+#define REG32_WRITE(addr, data)     REG32_DATA(addr) = data;
-+#define REG32_READ(addr, data)      data = (__u32) REG32_DATA(addr);
-+#endif
-+
-+#ifdef  _LINK_KSEG0_                /* Application is linked into KSEG0 space */
-+#define VIRT_ADDR(addr)             PHYS_TO_K0(PHYS_ADDR(addr))
-+#endif
-+
-+#ifdef  _LINK_KSEG1_                /* Application is linked into KSEG1 space */
-+#define VIRT_ADDR(addr)             PHYS_TO_K1(PHYS_ADDR(addr))
-+#endif
-+
-+#if !defined(_LINK_KSEG0_) && !defined(_LINK_KSEG1_)
-+#error  You must define _LINK_KSEG0_ or _LINK_KSEG1_ to compile the code.
-+#endif
-+
-+/* TNETD73XX chip definations */
-+
-+#define FREQ_1MHZ                       1000000
-+#define TNETD73XX_MIPS_FREQ             tnetd73xx_mips_freq /* CPU clock frequency */
-+#define TNETD73XX_VBUS_FREQ             tnetd73xx_vbus_freq /* originally (TNETD73XX_MIPS_FREQ/2) */
-+
-+#ifdef AR7SEAD2
-+#define TNETD73XX_MIPS_FREQ_DEFAULT     25000000       /* 25 Mhz for sead2 board crystal */
-+#else
-+#define TNETD73XX_MIPS_FREQ_DEFAULT     125000000      /* 125 Mhz */
-+#endif
-+#define TNETD73XX_VBUS_FREQ_DEFAULT     (TNETD73XX_MIPS_FREQ_DEFAULT / 2) /* Sync mode */
-+
-+
-+
-+/* Module base addresses */
-+#define TNETD73XX_ADSLSS_BASE               PHYS_TO_K1(0x01000000)      /* ADSLSS Module */
-+#define TNETD73XX_BBIF_CTRL_BASE            PHYS_TO_K1(0x02000000)      /* BBIF Control */
-+#define TNETD73XX_ATMSAR_BASE               PHYS_TO_K1(0x03000000)      /* ATM SAR */
-+#define TNETD73XX_USB_BASE                  PHYS_TO_K1(0x03400000)      /* USB Module */
-+#define TNETD73XX_VLYNQ0_BASE               PHYS_TO_K1(0x04000000)      /* VLYNQ0 Module */
-+#define TNETD73xx_EMAC0_BASE                PHYS_TO_K1(0x08610000)      /* EMAC0 Module*/
-+#define TNETD73XX_EMIF_BASE                 PHYS_TO_K1(0x08610800)      /* EMIF Module */
-+#define TNETD73XX_GPIO_BASE                 PHYS_TO_K1(0x08610900)      /* GPIO control */
-+#define TNETD73XX_CLOCK_CTRL_BASE           PHYS_TO_K1(0x08610A00)      /* Clock Control */
-+#define TNETD73XX_WDTIMER_BASE              PHYS_TO_K1(0x08610B00)      /* WDTIMER Module */
-+#define TNETD73XX_TIMER0_BASE               PHYS_TO_K1(0x08610C00)      /* TIMER0 Module */
-+#define TNETD73XX_TIMER1_BASE               PHYS_TO_K1(0x08610D00)      /* TIMER1 Module */
-+#define TNETD73XX_UARTA_BASE                PHYS_TO_K1(0x08610E00)      /* UART A */
-+#define TNETD73XX_UARTB_BASE                PHYS_TO_K1(0x08610F00)      /* UART B */
-+#define TNETD73XX_I2C_BASE                  PHYS_TO_K1(0x08611000)      /* I2C Module */
-+#define TNETD73XX_USB_DMA_BASE              PHYS_TO_K1(0x08611200)      /* USB Module */
-+#define TNETD73XX_MCDMA_BASE                PHYS_TO_K1(0x08611400)      /* MC-DMA */
-+#define TNETD73xx_VDMAVT_BASE               PHYS_TO_K1(0x08611500)      /* VDMAVT Control */
-+#define TNETD73XX_RST_CTRL_BASE             PHYS_TO_K1(0x08611600)      /* Reset Control */
-+#define TNETD73xx_BIST_CTRL_BASE            PHYS_TO_K1(0x08611700)      /* BIST Control */
-+#define TNETD73xx_VLYNQ0_CTRL_BASE          PHYS_TO_K1(0x08611800)      /* VLYNQ0 Control */
-+#define TNETD73XX_DCL_BASE                  PHYS_TO_K1(0x08611A00)      /* Device Configuration Latch */
-+#define TNETD73xx_VLYNQ1_CTRL_BASE          PHYS_TO_K1(0x08611C00)      /* VLYNQ1 Control */
-+#define TNETD73xx_MDIO_BASE                 PHYS_TO_K1(0x08611E00)      /* MDIO Control */
-+#define TNETD73XX_FSER_BASE                 PHYS_TO_K1(0x08612000)      /* FSER Control */
-+#define TNETD73XX_INTC_BASE                 PHYS_TO_K1(0x08612400)      /* Interrupt Controller */
-+#define TNETD73xx_EMAC1_BASE                PHYS_TO_K1(0x08612800)      /* EMAC1 Module*/
-+#define TNETD73XX_VLYNQ1_BASE               PHYS_TO_K1(0x0C000000)      /* VLYNQ1 Module */
-+
-+/* BBIF Registers */
-+#define TNETD73XX_BBIF_ADSLADR              (TNETD73XX_BBIF_CTRL_BASE + 0x0)
-+
-+/* Device Configuration Latch Registers */
-+#define TNETD73XX_DCL_BOOTCR                (TNETD73XX_DCL_BASE + 0x0)
-+#define TNETD73XX_DCL_DPLLSELR              (TNETD73XX_DCL_BASE + 0x10)
-+#define TNETD73XX_DCL_SPEEDCTLR             (TNETD73XX_DCL_BASE + 0x14)
-+#define TNETD73XX_DCL_SPEEDPWDR             (TNETD73XX_DCL_BASE + 0x18)
-+#define TNETD73XX_DCL_SPEEDCAPR             (TNETD73XX_DCL_BASE + 0x1C)
-+
-+/* GPIO Control */
-+#define TNETD73XX_GPIODINR                  (TNETD73XX_GPIO_BASE + 0x0)
-+#define TNETD73XX_GPIODOUTR                 (TNETD73XX_GPIO_BASE + 0x4)
-+#define TNETD73XX_GPIOPDIRR                 (TNETD73XX_GPIO_BASE + 0x8)
-+#define TNETD73XX_GPIOENR                   (TNETD73XX_GPIO_BASE + 0xC)
-+#define TNETD73XX_CVR                       (TNETD73XX_GPIO_BASE + 0x14)
-+#define TNETD73XX_DIDR1                     (TNETD73XX_GPIO_BASE + 0x18)
-+#define TNETD73XX_DIDR2                     (TNETD73XX_GPIO_BASE + 0x1C)
-+
-+/* Reset Control  */
-+#define TNETD73XX_RST_CTRL_PRCR             (TNETD73XX_RST_CTRL_BASE + 0x0)
-+#define TNETD73XX_RST_CTRL_SWRCR            (TNETD73XX_RST_CTRL_BASE + 0x4)
-+#define TNETD73XX_RST_CTRL_RSR              (TNETD73XX_RST_CTRL_BASE + 0x8)
-+
-+/* Power Control  */
-+#define TNETD73XX_POWER_CTRL_PDCR           (TNETD73XX_CLOCK_CTRL_BASE + 0x0)
-+#define TNETD73XX_POWER_CTRL_PCLKCR         (TNETD73XX_CLOCK_CTRL_BASE + 0x4)
-+#define TNETD73XX_POWER_CTRL_PDUCR          (TNETD73XX_CLOCK_CTRL_BASE + 0x8)
-+#define TNETD73XX_POWER_CTRL_WKCR           (TNETD73XX_CLOCK_CTRL_BASE + 0xC)
-+
-+/* Clock Control */
-+#define TNETD73XX_CLK_CTRL_SCLKCR           (TNETD73XX_CLOCK_CTRL_BASE + 0x20)
-+#define TNETD73XX_CLK_CTRL_SCLKPLLCR        (TNETD73XX_CLOCK_CTRL_BASE + 0x30)
-+#define TNETD73XX_CLK_CTRL_MCLKCR           (TNETD73XX_CLOCK_CTRL_BASE + 0x40)
-+#define TNETD73XX_CLK_CTRL_MCLKPLLCR        (TNETD73XX_CLOCK_CTRL_BASE + 0x50)
-+#define TNETD73XX_CLK_CTRL_UCLKCR           (TNETD73XX_CLOCK_CTRL_BASE + 0x60)
-+#define TNETD73XX_CLK_CTRL_UCLKPLLCR        (TNETD73XX_CLOCK_CTRL_BASE + 0x70)
-+#define TNETD73XX_CLK_CTRL_ACLKCR0          (TNETD73XX_CLOCK_CTRL_BASE + 0x80)
-+#define TNETD73XX_CLK_CTRL_ACLKPLLCR0       (TNETD73XX_CLOCK_CTRL_BASE + 0x90)
-+#define TNETD73XX_CLK_CTRL_ACLKCR1          (TNETD73XX_CLOCK_CTRL_BASE + 0xA0)
-+#define TNETD73XX_CLK_CTRL_ACLKPLLCR1       (TNETD73XX_CLOCK_CTRL_BASE + 0xB0)
-+
-+/* EMIF control */
-+#define TNETD73XX_EMIF_SDRAM_CFG              ( TNETD73XX_EMIF_BASE + 0x08 )                
-+
-+/* UART */
-+#ifdef AR7SEAD2
-+#define TNETD73XX_UART_FREQ                 3686400
-+#else
-+#define TNETD73XX_UART_FREQ                 TNETD73XX_VBUS_FREQ
-+#endif
-+
-+/* Interrupt Controller */
-+
-+/* Primary interrupts */
-+#define TNETD73XX_INTC_UNIFIED_SECONDARY    0   /* Unified secondary interrupt */
-+#define TNETD73XX_INTC_EXTERNAL0            1   /* External Interrupt Line 0 */
-+#define TNETD73XX_INTC_EXTERNAL1            2   /* External Interrupt Line 1 */
-+#define TNETD73XX_INTC_RESERVED3            3   /* Reserved */
-+#define TNETD73XX_INTC_RESERVED4            4   /* Reserved */
-+#define TNETD73XX_INTC_TIMER0               5   /* TIMER 0 int */
-+#define TNETD73XX_INTC_TIMER1               6   /* TIMER 1 int */
-+#define TNETD73XX_INTC_UART0                7   /* UART 0 int */
-+#define TNETD73XX_INTC_UART1                8   /* UART 1 int */
-+#define TNETD73XX_INTC_MCDMA0               9   /* MCDMA 0 int */
-+#define TNETD73XX_INTC_MCDMA1               10  /* MCDMA 1 int */
-+#define TNETD73XX_INTC_RESERVED11           11  /* Reserved */
-+#define TNETD73XX_INTC_RESERVED12           12  /* Reserved */
-+#define TNETD73XX_INTC_RESERVED13           13  /* Reserved */
-+#define TNETD73XX_INTC_RESERVED14           14  /* Reserved */
-+#define TNETD73XX_INTC_ATMSAR               15  /* ATM SAR int */
-+#define TNETD73XX_INTC_RESERVED16           16  /* Reserved */
-+#define TNETD73XX_INTC_RESERVED17           17  /* Reserved */
-+#define TNETD73XX_INTC_RESERVED18           18  /* Reserved */
-+#define TNETD73XX_INTC_EMAC0                19  /* EMAC 0 int */
-+#define TNETD73XX_INTC_RESERVED20           20  /* Reserved */
-+#define TNETD73XX_INTC_VLYNQ0               21  /* VLYNQ 0 int */
-+#define TNETD73XX_INTC_CODEC                22  /* CODEC int */
-+#define TNETD73XX_INTC_RESERVED23           23  /* Reserved */
-+#define TNETD73XX_INTC_USBSLAVE             24  /* USB Slave int */
-+#define TNETD73XX_INTC_VLYNQ1               25  /* VLYNQ 1 int */
-+#define TNETD73XX_INTC_RESERVED26           26  /* Reserved */
-+#define TNETD73XX_INTC_RESERVED27           27  /* Reserved */
-+#define TNETD73XX_INTC_ETH_PHY              28  /* Ethernet PHY   */
-+#define TNETD73XX_INTC_I2C                  29  /* I2C int */
-+#define TNETD73XX_INTC_MCDMA2               30  /* MCDMA 2 int */
-+#define TNETD73XX_INTC_MCDMA3               31  /* MCDMA 3 int */
-+#define TNETD73XX_INTC_RESERVED32           32  /* Reserved */
-+#define TNETD73XX_INTC_EMAC1                33  /* EMAC 1 int */
-+#define TNETD73XX_INTC_RESERVED34           34  /* Reserved */
-+#define TNETD73XX_INTC_RESERVED35           35  /* Reserved */
-+#define TNETD73XX_INTC_RESERVED36           36  /* Reserved */
-+#define TNETD73XX_INTC_VDMAVTRX             37  /* VDMAVTRX */
-+#define TNETD73XX_INTC_VDMAVTTX             38  /* VDMAVTTX */
-+#define TNETD73XX_INTC_ADSLSS               39  /* ADSLSS */
-+
-+/* Secondary interrupts */
-+#define TNETD73XX_INTC_SEC0                 40  /* Secondary */
-+#define TNETD73XX_INTC_SEC1                 41  /* Secondary */
-+#define TNETD73XX_INTC_SEC2                 42  /* Secondary */
-+#define TNETD73XX_INTC_SEC3                 43  /* Secondary */
-+#define TNETD73XX_INTC_SEC4                 44  /* Secondary */
-+#define TNETD73XX_INTC_SEC5                 45  /* Secondary */
-+#define TNETD73XX_INTC_SEC6                 46  /* Secondary */
-+#define TNETD73XX_INTC_EMIF                 47  /* EMIF */
-+#define TNETD73XX_INTC_SEC8                 48  /* Secondary */
-+#define TNETD73XX_INTC_SEC9                 49  /* Secondary */
-+#define TNETD73XX_INTC_SEC10                50  /* Secondary */
-+#define TNETD73XX_INTC_SEC11                51  /* Secondary */
-+#define TNETD73XX_INTC_SEC12                52  /* Secondary */
-+#define TNETD73XX_INTC_SEC13                53  /* Secondary */
-+#define TNETD73XX_INTC_SEC14                54  /* Secondary */
-+#define TNETD73XX_INTC_SEC15                55  /* Secondary */
-+#define TNETD73XX_INTC_SEC16                56  /* Secondary */
-+#define TNETD73XX_INTC_SEC17                57  /* Secondary */
-+#define TNETD73XX_INTC_SEC18                58  /* Secondary */
-+#define TNETD73XX_INTC_SEC19                59  /* Secondary */
-+#define TNETD73XX_INTC_SEC20                60  /* Secondary */
-+#define TNETD73XX_INTC_SEC21                61  /* Secondary */
-+#define TNETD73XX_INTC_SEC22                62  /* Secondary */
-+#define TNETD73XX_INTC_SEC23                63  /* Secondary */
-+#define TNETD73XX_INTC_SEC24                64  /* Secondary */
-+#define TNETD73XX_INTC_SEC25                65  /* Secondary */
-+#define TNETD73XX_INTC_SEC26                66  /* Secondary */
-+#define TNETD73XX_INTC_SEC27                67  /* Secondary */
-+#define TNETD73XX_INTC_SEC28                68  /* Secondary */
-+#define TNETD73XX_INTC_SEC29                69  /* Secondary */
-+#define TNETD73XX_INTC_SEC30                70  /* Secondary */
-+#define TNETD73XX_INTC_SEC31                71  /* Secondary */
-+
-+/* These ugly macros are to access the -1 registers, like config1 */
-+#define MFC0_SEL1_OPCODE(dst, src)\
-+        .word (0x40000000 | ((dst)<<16) | ((src)<<11) | 1);\
-+        nop; \
-+        nop; \
-+        nop
-+
-+#define MTC0_SEL1_OPCODE(dst, src)\
-+        .word (0x40800000 | ((dst)<<16) | ((src)<<11) | 1);\
-+        nop; \
-+        nop; \
-+        nop
-+
-+
-+/* Below are Jade core specific */
-+#define CFG0_4K_IL_MASK         0x00380000
-+#define CFG0_4K_IL_SHIFT        19
-+#define CFG0_4K_IA_MASK         0x00070000
-+#define CFG0_4K_IA_SHIFT        16
-+#define CFG0_4K_IS_MASK         0x01c00000
-+#define CFG0_4K_IS_SHIFT        22
-+
-+#define CFG0_4K_DL_MASK         0x00001c00
-+#define CFG0_4K_DL_SHIFT        10
-+#define CFG0_4K_DA_MASK         0x00000380
-+#define CFG0_4K_DA_SHIFT        7
-+#define CFG0_4K_DS_MASK         0x0000E000
-+#define CFG0_4K_DS_SHIFT        13
-+
-+
-+
-+#endif /* __TNETD73XX_H_ */
-diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_err.h linux.dev/include/asm-mips/ar7/tnetd73xx_err.h
---- linux.old/include/asm-mips/ar7/tnetd73xx_err.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/tnetd73xx_err.h	2005-11-10 01:10:46.075589000 +0100
-@@ -0,0 +1,42 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    TNETD73xx Error Definations Header File
-+ ******************************************************************************
-+ * FILE NAME:       tnetd73xx_err.h
-+ *
-+ * DESCRIPTION:     Error definations for TNETD73XX
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - PSP TII  
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+ 
-+#ifndef __TNETD73XX_ERR_H__
-+#define __TNETD73XX_ERR_H__
-+
-+typedef enum TNETD73XX_ERR_t
-+{
-+    TNETD73XX_ERR_OK        = 0,    /* OK or SUCCESS */
-+    TNETD73XX_ERR_ERROR     = -1,   /* Unspecified/Generic ERROR */
-+
-+    /* Pointers and args */
-+    TNETD73XX_ERR_INVARG        = -2,   /* Invaild argument to the call */
-+    TNETD73XX_ERR_NULLPTR       = -3,   /* NULL pointer */
-+    TNETD73XX_ERR_BADPTR        = -4,   /* Bad (out of mem) pointer */
-+
-+    /* Memory issues */
-+    TNETD73XX_ERR_ALLOC_FAIL    = -10,  /* allocation failed */
-+    TNETD73XX_ERR_FREE_FAIL     = -11,  /* free failed */
-+    TNETD73XX_ERR_MEM_CORRUPT   = -12,  /* corrupted memory */
-+    TNETD73XX_ERR_BUF_LINK      = -13,  /* buffer linking failed */
-+
-+    /* Device issues */
-+    TNETD73XX_ERR_DEVICE_TIMEOUT    = -20,  /* device timeout on read/write */
-+    TNETD73XX_ERR_DEVICE_MALFUNC    = -21,  /* device malfunction */
-+
-+    TNETD73XX_ERR_INVID     = -30   /* Invalid ID */
-+
-+} TNETD73XX_ERR;
-+
-+#endif /* __TNETD73XX_ERR_H__ */
-diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h
---- linux.old/include/asm-mips/ar7/tnetd73xx_misc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h	2005-11-10 01:10:46.075589000 +0100
-@@ -0,0 +1,239 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    TNETD73xx Misc modules API Header
-+ ******************************************************************************
-+ * FILE NAME:       tnetd73xx_misc.h
-+ *
-+ * DESCRIPTION:     Clock Control, Reset Control, Power Management, GPIO
-+ *                  FSER Modules API 
-+ *                  As per TNETD73xx specifications
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - Sharath Kumar     PSP TII  
-+ * 14 Feb 03 - Anant Gole        PSP TII
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+#ifndef __TNETD73XX_MISC_H__
-+#define __TNETD73XX_MISC_H__
-+
-+/*****************************************************************************
-+ * Reset Control Module
-+ *****************************************************************************/
-+ 
-+typedef enum TNETD73XX_RESET_MODULE_tag
-+{
-+    RESET_MODULE_UART0      = 0,
-+    RESET_MODULE_UART1      = 1,
-+    RESET_MODULE_I2C        = 2,
-+    RESET_MODULE_TIMER0     = 3,
-+    RESET_MODULE_TIMER1     = 4,
-+    RESET_MODULE_GPIO       = 6,
-+    RESET_MODULE_ADSLSS     = 7,
-+    RESET_MODULE_USBS       = 8,
-+    RESET_MODULE_SAR        = 9,
-+    RESET_MODULE_VDMA_VT    = 11,
-+    RESET_MODULE_FSER       = 12,
-+    RESET_MODULE_VLYNQ1     = 16,
-+    RESET_MODULE_EMAC0      = 17,
-+    RESET_MODULE_DMA        = 18,
-+    RESET_MODULE_BIST       = 19,
-+    RESET_MODULE_VLYNQ0     = 20,
-+    RESET_MODULE_EMAC1      = 21,
-+    RESET_MODULE_MDIO       = 22,
-+    RESET_MODULE_ADSLSS_DSP = 23,
-+    RESET_MODULE_EPHY       = 26
-+} TNETD73XX_RESET_MODULE_T;
-+
-+typedef enum TNETD73XX_RESET_CTRL_tag
-+{
-+    IN_RESET        = 0,
-+    OUT_OF_RESET
-+} TNETD73XX_RESET_CTRL_T;
-+
-+typedef enum TNETD73XX_SYS_RST_MODE_tag
-+{
-+    RESET_SOC_WITH_MEMCTRL      = 1,    /* SW0 bit in SWRCR register */
-+    RESET_SOC_WITHOUT_MEMCTRL   = 2     /* SW1 bit in SWRCR register */
-+} TNETD73XX_SYS_RST_MODE_T;
-+
-+typedef enum TNETD73XX_SYS_RESET_STATUS_tag
-+{
-+    HARDWARE_RESET = 0,
-+    SOFTWARE_RESET0,            /* Caused by writing 1 to SW0 bit in SWRCR register */
-+    WATCHDOG_RESET,
-+    SOFTWARE_RESET1             /* Caused by writing 1 to SW1 bit in SWRCR register */
-+} TNETD73XX_SYS_RESET_STATUS_T;
-+
-+void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module, 
-+                                TNETD73XX_RESET_CTRL_T reset_ctrl);
-+TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status(TNETD73XX_RESET_MODULE_T reset_module);
-+void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode);
-+TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status(void);
-+                    
-+/*****************************************************************************
-+ * Power Control Module
-+ *****************************************************************************/
-+
-+typedef enum TNETD73XX_POWER_MODULE_tag
-+{
-+    POWER_MODULE_USBSP      = 0,
-+    POWER_MODULE_WDTP       = 1,
-+    POWER_MODULE_UT0P       = 2,
-+    POWER_MODULE_UT1P       = 3,
-+    POWER_MODULE_IICP       = 4,
-+    POWER_MODULE_VDMAP      = 5,
-+    POWER_MODULE_GPIOP      = 6,
-+    POWER_MODULE_VLYNQ1P    = 7,
-+    POWER_MODULE_SARP       = 8,
-+    POWER_MODULE_ADSLP      = 9,
-+    POWER_MODULE_EMIFP      = 10,
-+    POWER_MODULE_ADSPP      = 12,
-+    POWER_MODULE_RAMP       = 13,
-+    POWER_MODULE_ROMP       = 14,
-+    POWER_MODULE_DMAP       = 15,
-+    POWER_MODULE_BISTP      = 16,
-+    POWER_MODULE_TIMER0P    = 18,
-+    POWER_MODULE_TIMER1P    = 19,
-+    POWER_MODULE_EMAC0P     = 20,
-+    POWER_MODULE_EMAC1P     = 22,
-+    POWER_MODULE_EPHYP      = 24,
-+    POWER_MODULE_VLYNQ0P    = 27,
-+} TNETD73XX_POWER_MODULE_T;
-+
-+typedef enum TNETD73XX_POWER_CTRL_tag
-+{
-+    POWER_CTRL_POWER_UP = 0,
-+    POWER_CTRL_POWER_DOWN
-+} TNETD73XX_POWER_CTRL_T;
-+
-+typedef enum TNETD73XX_SYS_POWER_MODE_tag
-+{
-+    GLOBAL_POWER_MODE_RUN       = 0,    /* All system is up */
-+    GLOBAL_POWER_MODE_IDLE,             /* MIPS is power down, all peripherals working */
-+    GLOBAL_POWER_MODE_STANDBY,          /* Chip in power down, but clock to ADSKL subsystem is running */
-+    GLOBAL_POWER_MODE_POWER_DOWN        /* Total chip is powered down */
-+} TNETD73XX_SYS_POWER_MODE_T;
-+
-+void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module,  TNETD73XX_POWER_CTRL_T power_ctrl);
-+TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module);
-+void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode);
-+TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode(void);
-+
-+/*****************************************************************************
-+ * Wakeup Control 
-+ *****************************************************************************/
-+
-+typedef enum TNETD73XX_WAKEUP_INTERRUPT_tag
-+{
-+    WAKEUP_INT0 = 1,
-+    WAKEUP_INT1 = 2,
-+    WAKEUP_INT2 = 4,
-+    WAKEUP_INT3 = 8
-+} TNETD73XX_WAKEUP_INTERRUPT_T;
-+
-+typedef enum TNETD73XX_WAKEUP_CTRL_tag
-+{
-+    WAKEUP_DISABLED = 0,
-+    WAKEUP_ENABLED
-+} TNETD73XX_WAKEUP_CTRL_T;
-+
-+typedef enum TNETD73XX_WAKEUP_POLARITY_tag
-+{
-+    WAKEUP_ACTIVE_HIGH = 0,
-+    WAKEUP_ACTIVE_LOW
-+} TNETD73XX_WAKEUP_POLARITY_T;
-+
-+void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int, 
-+                           TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl, 
-+                           TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity);
-+
-+/*****************************************************************************
-+ * FSER  Control 
-+ *****************************************************************************/
-+ 
-+typedef enum TNETD73XX_FSER_MODE_tag
-+{
-+    FSER_I2C    = 0,
-+    FSER_UART   = 1
-+} TNETD73XX_FSER_MODE_T;
-+
-+void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode);
-+
-+/*****************************************************************************
-+ * Clock Control 
-+ *****************************************************************************/
-+
-+#define CLK_MHZ(x)    ( (x) * 1000000 )
-+
-+typedef enum TNETD73XX_CLKC_ID_tag
-+{
-+    CLKC_SYS = 0,
-+    CLKC_MIPS,
-+    CLKC_USB,
-+    CLKC_ADSLSS
-+} TNETD73XX_CLKC_ID_T;
-+
-+void tnetd73xx_clkc_init(__u32 afeclk, __u32 refclk, __u32 xtal3in);
-+TNETD73XX_ERR tnetd73xx_clkc_set_freq(TNETD73XX_CLKC_ID_T clk_id, __u32 output_freq);
-+__u32 tnetd73xx_clkc_get_freq(TNETD73XX_CLKC_ID_T clk_id);
-+
-+/*****************************************************************************
-+ * GPIO Control 
-+ *****************************************************************************/
-+
-+typedef enum TNETD73XX_GPIO_PIN_tag
-+{
-+    GPIO_UART0_RD           = 0,
-+    GPIO_UART0_TD           = 1,
-+    GPIO_UART0_RTS          = 2,
-+    GPIO_UART0_CTS          = 3,
-+    GPIO_FSER_CLK           = 4,
-+    GPIO_FSER_D             = 5,
-+    GPIO_EXT_AFE_SCLK       = 6,
-+    GPIO_EXT_AFE_TX_FS      = 7,
-+    GPIO_EXT_AFE_TXD        = 8,
-+    GPIO_EXT_AFE_RS_FS      = 9,
-+    GPIO_EXT_AFE_RXD1       = 10,
-+    GPIO_EXT_AFE_RXD0       = 11,
-+    GPIO_EXT_AFE_CDIN       = 12,
-+    GPIO_EXT_AFE_CDOUT      = 13,
-+    GPIO_EPHY_SPEED100      = 14,
-+    GPIO_EPHY_LINKON        = 15,
-+    GPIO_EPHY_ACTIVITY      = 16,
-+    GPIO_EPHY_FDUPLEX       = 17,
-+    GPIO_EINT0              = 18,
-+    GPIO_EINT1              = 19,
-+    GPIO_MBSP0_TCLK         = 20,
-+    GPIO_MBSP0_RCLK         = 21,
-+    GPIO_MBSP0_RD           = 22,
-+    GPIO_MBSP0_TD           = 23,
-+    GPIO_MBSP0_RFS          = 24,
-+    GPIO_MBSP0_TFS          = 25,
-+    GPIO_MII_DIO            = 26,
-+    GPIO_MII_DCLK           = 27,
-+} TNETD73XX_GPIO_PIN_T;
-+
-+typedef enum TNETD73XX_GPIO_PIN_MODE_tag
-+{
-+    FUNCTIONAL_PIN = 0,
-+    GPIO_PIN = 1
-+} TNETD73XX_GPIO_PIN_MODE_T;
-+
-+typedef enum TNETD73XX_GPIO_PIN_DIRECTION_tag
-+{
-+    GPIO_OUTPUT_PIN = 0,
-+    GPIO_INPUT_PIN = 1
-+} TNETD73XX_GPIO_PIN_DIRECTION_T;
-+ 
-+void tnetd73xx_gpio_init(void);
-+void tnetd73xx_gpio_ctrl(TNETD73XX_GPIO_PIN_T gpio_pin, 
-+                         TNETD73XX_GPIO_PIN_MODE_T pin_mode,
-+                         TNETD73XX_GPIO_PIN_DIRECTION_T pin_direction);
-+void tnetd73xx_gpio_out(TNETD73XX_GPIO_PIN_T gpio_pin, int value);
-+int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin);
-+
-+/* TNETD73XX Revision */
-+__u32 tnetd73xx_get_revision(void);
-+
-+#endif /* __TNETD73XX_MISC_H__ */
-diff -urN linux.old/include/asm-mips/ar7/vlynq.h linux.dev/include/asm-mips/ar7/vlynq.h
---- linux.old/include/asm-mips/ar7/vlynq.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/vlynq.h	2005-11-10 01:10:46.095590250 +0100
-@@ -0,0 +1,610 @@
-+/***************************************************************************
-+**+----------------------------------------------------------------------+**
-+**|                                ****                                  |**
-+**|                                ****                                  |**
-+**|                                ******o***                            |**
-+**|                          ********_///_****                           |**
-+**|                           ***** /_//_/ ****                          |**
-+**|                            ** ** (__/ ****                           |**
-+**|                                *********                             |**
-+**|                                 ****                                 |**
-+**|                                  ***                                 |**
-+**|                                                                      |**
-+**|     Copyright (c) 2003 Texas Instruments Incorporated                |**
-+**|                        ALL RIGHTS RESERVED                           |**
-+**|                                                                      |**
-+**| Permission is hereby granted to licensees of Texas Instruments       |**
-+**| Incorporated (TI) products to use this computer program for the sole |**
-+**| purpose of implementing a licensee product based on TI products.     |**
-+**| No other rights to reproduce, use, or disseminate this computer      |**
-+**| program, whether in part or in whole, are granted.                   |**
-+**|                                                                      |**
-+**| TI makes no representation or warranties with respect to the         |**
-+**| performance of this computer program, and specifically disclaims     |**
-+**| any responsibility for any damages, special or consequential,        |**
-+**| connected with the use of this program.                              |**
-+**|                                                                      |**
-+**+----------------------------------------------------------------------+**
-+***************************************************************************/
-+
-+/*********************************************************************************
-+ *  ------------------------------------------------------------------------------
-+ *   Module      : vlynq_hal.h
-+ *   Description :
-+ *   This header file provides the set of functions exported by the 
-+ *   VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper.
-+ *  ------------------------------------------------------------------------------
-+ *********************************************************************************/
-+
-+#ifndef _VLYNQ_HAL_H_
-+#define _VLYNQ_HAL_H_
-+
-+/* Enable/Disable debug feature */
-+#undef VLYNQ_DEBUG 
-+
-+#ifdef VLYNQ_DEBUG  /* This needs to be OS abstracted - for testing use vxworks/linux calls */
-+#define debugPrint(format,args...)    
-+#else 
-+#define debugPrint(format,args...)  
-+#endif
-+
-+ /* number of VLYNQ memory regions supported */
-+#define VLYNQ_MAX_MEMORY_REGIONS 0x04
-+  
-+ /* Max.number of external interrupt inputs supported by VLYNQ module */
-+#define VLYNQ_IVR_MAXIVR         0x08
-+
-+#define VLYNQ_CLK_DIV_MAX  0x08
-+#define VLYNQ_CLK_DIV_MIN  0x01
-+
-+
-+/*** the total number of entries allocated for ICB would be
-+ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/
-+#define VLYNQ_IVR_CHAIN_SLOTS 10
-+
-+
-+/* Error defines */
-+#define VLYNQ_SUCCESS               0
-+
-+#define VLYNQ_ERRCODE_BASE          0 /* Chosen by system */
-+#define VLYNQ_INVALID_ARG          -(VLYNQ_ERRCODE_BASE+1)
-+#define VLYNQ_INVALID_DRV_STATE    -(VLYNQ_ERRCODE_BASE+2)
-+#define VLYNQ_INT_CONFIG_ERR       -(VLYNQ_ERRCODE_BASE+3)
-+#define VLYNQ_LINK_DOWN            -(VLYNQ_ERRCODE_BASE+4)
-+#define VLYNQ_MEMALLOC_FAIL        -(VLYNQ_ERRCODE_BASE+5)
-+#define VLYNQ_ISR_NON_EXISTENT     -(VLYNQ_ERRCODE_BASE+6)
-+#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7)
-+
-+/* Vlynq Defines and Macros */
-+
-+#define VLYNQ_NUM_INT_BITS              32 /* 32 bit interrupt staus register */
-+
-+/* Base address of module */
-+#define VLYNQ_BASE                      (pdev->module_base)
-+
-+#define VLYNQ_REMOTE_REGS_OFFSET        0x0080
-+
-+#define VLYNQ_REV_OFFSET                0x0000
-+#define VLYNQ_CTRL_OFFSET               0x0004
-+#define VLYNQ_STATUS_OFFSET             0x0008
-+#define VLYNQ_INT_STAT_OFFSET           0x0010
-+#define VLYNQ_INT_PEND_OFFSET           0x0014
-+#define VLYNQ_INT_PTR_OFFSET            0x0018
-+#define VLYNQ_TXMAP_OFFSET              0x001c
-+
-+#define VLYNQ_RX0MAP_SIZE_REG_OFFSET    0x0020
-+#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET  0x0024
-+
-+#define VLYNQ_CHIP_VER_OFFSET           0x0040
-+#define VLYNQ_IVR_REGS_OFFSET           0x0060
-+
-+#define VLYNQ_INT_PENDING_REG_PTR       0x14
-+#define VLYNQ_R_INT_PENDING_REG_PTR     VLYNQ_REMOTE_REGS_OFFSET + 0x14
-+
-+#define VLYNQ_REV_REG       *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_REV_OFFSET))
-+#define VLYNQ_CTRL_REG      *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET))
-+#define VLYNQ_STATUS_REG    *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET))
-+#define VLYNQ_INT_STAT_REG  *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET))
-+#define VLYNQ_INT_PEND_REG  *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET))
-+#define VLYNQ_INT_PTR_REG   *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET))
-+#define VLYNQ_TXMAP_REG     *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET))
-+
-+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
-+#define VLYNQ_RXMAP_SIZE_REG(map) \
-+    *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3)))
-+    
-+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
-+#define VLYNQ_RXMAP_OFFSET_REG(map) \
-+    *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3)))
-+
-+#define VLYNQ_CHIP_VER_REG  *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET))
-+
-+/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */
-+#define VLYNQ_IVR_OFFSET(ivr)  \
-+    (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) )
-+
-+#define VLYNQ_IVR_03TO00_REG  *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(0)) )
-+#define VLYNQ_IVR_07TO04_REG  *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(4)) )
-+/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
-+
-+#define VLYNQ_IVR_INTEN(ivr)    (((unsigned int)(0x80)) << ((((unsigned)(ivr)) % 4) * 8))
-+#define VLYNQ_IVR_INTTYPE(ivr)  (((unsigned int)(0x40)) << ((((unsigned)(ivr)) % 4) * 8))
-+#define VLYNQ_IVR_INTPOL(ivr)   (((unsigned int)(0x20)) << ((((unsigned)(ivr)) % 4) * 8))
-+#define VLYNQ_IVR_INTVEC(ivr)   (((unsigned int)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8))
-+#define VLYNQ_IVR_INTALL(ivr)   (((unsigned int)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8))
-+
-+
-+
-+/*********************************
-+ * Remote VLYNQ register set     *
-+ *********************************/
-+
-+#define VLYNQ_R_REV_OFFSET              0x0080
-+#define VLYNQ_R_CTRL_OFFSET             0x0084
-+#define VLYNQ_R_STATUS_OFFSET           0x0088
-+#define VLYNQ_R_INT_STAT_OFFSET         0x0090
-+#define VLYNQ_R_INT_PEND_OFFSET         0x0094
-+#define VLYNQ_R_INT_PTR_OFFSET          0x0098
-+#define VLYNQ_R_TXMAP_OFFSET            0x009c
-+
-+#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET  0x00A0
-+#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4
-+
-+#define VLYNQ_R_CHIP_VER_OFFSET         0x00C0
-+#define VLYNQ_R_IVR_REGS_OFFSET         0x00E0
-+
-+#define VLYNQ_R_REV_REG       *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET)) 
-+#define VLYNQ_R_CTRL_REG      *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET))
-+#define VLYNQ_R_STATUS_REG    *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET))
-+#define VLYNQ_R_INT_STAT_REG  *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET))
-+#define VLYNQ_R_INT_PEND_REG  *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET))
-+#define VLYNQ_R_INT_PTR_REG   *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET))
-+#define VLYNQ_R_TXMAP_REG     *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET))
-+
-+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
-+#define VLYNQ_R_RXMAP_SIZE_REG(map) \
-+    *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3)))
-+    
-+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
-+#define VLYNQ_R_RXMAP_OFFSET_REG(map) \
-+    *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3)))
-+
-+#define VLYNQ_R_CHIP_VER_REG  *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET)
-+
-+#define VLYNQ_R_IVR_OFFSET(ivr)  \
-+    (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3))
-+ 
-+
-+/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
-+#define VLYNQ_R_IVR_03TO00_REG  *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(0)) )
-+#define VLYNQ_R_IVR_07TO04_REG  *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(4)) )
-+
-+
-+/****End of remote register set definition******/
-+
-+
-+/*** Masks for individual register fields ***/
-+
-+#define VLYNQ_MODULE_ID_MASK        0xffff0000
-+#define VLYNQ_MAJOR_REV_MASK        0x0000ff00
-+#define VLYNQ_MINOR_REV_MASK        0x000000ff
-+
-+    
-+#define VLYNQ_CTL_ILOOP_MASK        0x00000002
-+#define VLYNQ_CTL_INT2CFG_MASK      0x00000080
-+#define VLYNQ_CTL_INTVEC_MASK       0x00001f00
-+#define VLYNQ_CTL_INTEN_MASK        0x00002000
-+#define VLYNQ_CTL_INTLOCAL_MASK     0x00004000
-+#define VLYNQ_CTL_CLKDIR_MASK       0x00008000
-+#define VLYNQ_CTL_CLKDIV_MASK       0x00070000
-+#define VLYNQ_CTL_MODE_MASK         0x00e00000
-+
-+
-+#define VLYNQ_STS_LINK_MASK         0x00000001  /* Link is active */
-+#define VLYNQ_STS_MPEND_MASK        0x00000002  /* Pending master requests */
-+#define VLYNQ_STS_SPEND_MASK        0x00000004  /* Pending slave requests */
-+#define VLYNQ_STS_NFEMPTY0_MASK     0x00000008  /* Master data FIFO not empty */
-+#define VLYNQ_STS_NFEMPTY1_MASK     0x00000010  /* Master command FIFO not empty */
-+#define VLYNQ_STS_NFEMPTY2_MASK     0x00000020  /* Slave data FIFO not empty */
-+#define VLYNQ_STS_NFEMPTY3_MASK     0x00000040  /* Slave command FIFO not empty */
-+#define VLYNQ_STS_LERROR_MASK       0x00000080  /* Local error, w/c */
-+#define VLYNQ_STS_RERROR_MASK       0x00000100  /* remote error w/c */
-+#define VLYNQ_STS_OFLOW_MASK        0x00000200
-+#define VLYNQ_STS_IFLOW_MASK        0x00000400
-+#define VLYNQ_STS_MODESUP_MASK      0x00E00000  /* Highest mode supported */
-+#define VLYNQ_STS_SWIDTH_MASK       0x07000000  /* Used for reading the width of VLYNQ bus */
-+#define VLYNQ_STS_DEBUG_MASK        0xE0000000 
-+
-+#define VLYNQ_CTL_INTVEC_SHIFT      0x08
-+#define VLYNQ_CTL_INTEN_SHIFT       0x0D
-+#define VLYNQ_CTL_INT2CFG_SHIFT     0x07
-+#define VLYNQ_CTL_INTLOCAL_SHIFT    0x0E
-+
-+#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK  0x7F80
-+
-+#define VLYNQ_CHIPVER_DEVREV_MASK   0xffff0000
-+#define VLYNQ_CHIPVER_DEVID_MASK    0x0000ffff
-+
-+#define VLYNQ_IVR_INTEN_MASK        0x80
-+#define VLYNQ_IVR_INTTYPE_MASK      0x40
-+#define VLYNQ_IVR_INTPOL_MASK       0x20
-+
-+
-+/**** Helper macros ****/
-+
-+#define VLYNQ_RESETCB(arg) \
-+   if( pdev->reset_cb != NULL)   \
-+   {                             \
-+      (pdev->reset_cb)(pdev, (arg));  \
-+   }
-+    
-+#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 )
-+#define VLYNQ_CTL_INTVEC(x)         (((x) & 31) << 8 )
-+
-+#define VLYNQ_INRANGE(x,hi,lo)      (((x) <= (hi)) && ((x) >= (lo)))
-+#define VLYNQ_OUTRANGE(x,hi,lo)     (((x) > (hi)) || ((x) < (lo)))
-+
-+#define VLYNQ_ALIGN4(x)             (x)=(x)&(~3)   
-+
-+
-+/*************************************
-+ *             Enums                 *
-+ *************************************/
-+
-+/* Initialization options define what operations are
-+ * undertaken during vlynq module initialization */
-+typedef enum
-+{
-+    /* Init host local memory regions.This allows
-+     * local host access remote memory regions */
-+    VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01,
-+    /* Init host remote memory regions.This allows
-+     * remote device access local memory regions */
-+    VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02,
-+    /* Init local interrupt config*/
-+    VLYNQ_INIT_LOCAL_INTERRUPTS   =0x04,
-+    /* Init remote interrupt config*/
-+    VLYNQ_INIT_REMOTE_INTERRUPTS  =0x08,
-+    /* Check link during initialization*/
-+    VLYNQ_INIT_CHECK_LINK         =0x10,
-+    /* configure clock during init */
-+    VLYNQ_INIT_CONFIG_CLOCK       =0x20,
-+    /* Clear errors during init */    
-+    VLYNQ_INIT_CLEAR_ERRORS       =0x40,
-+    /* All options */
-+    VLYNQ_INIT_PERFORM_ALL        =0x7F
-+}VLYNQ_INIT_OPTIONS;
-+
-+
-+/* VLYNQ_DEV_TYPE identifies local or remote device */
-+typedef enum
-+{
-+    VLYNQ_LOCAL_DVC  = 0,           /* vlynq local device (SOC's vlynq module) */
-+    VLYNQ_REMOTE_DVC = 1            /* vlynq remote device (remote vlynq module) */
-+}VLYNQ_DEV_TYPE;
-+
-+
-+/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */
-+typedef enum
-+{
-+    VLYNQ_CLK_SOURCE_NONE   = 0,    /* do not initialize clock generator*/
-+    VLYNQ_CLK_SOURCE_LOCAL  = 1,    /* clock is generated by local machine  */
-+    VLYNQ_CLK_SOURCE_REMOTE = 2     /* clock is generated by remote machine */
-+}VLYNQ_CLK_SOURCE;
-+
-+
-+/* VLYNQ_DRV_STATE indicates the current driver state */
-+typedef enum
-+{
-+    VLYNQ_DRV_STATE_UNINIT = 0,     /* driver is uninitialized  */
-+    VLYNQ_DRV_STATE_ININIT = 1,     /* VLYNQ is being initialized */
-+    VLYNQ_DRV_STATE_RUN    = 2,     /* VLYNQ is running properly  */
-+    VLYNQ_DRV_STATE_HOLD   = 3,     /* driver stopped temporarily */
-+    VLYNQ_DRV_STATE_ERROR  = 4      /* driver stopped on unrecoverable error */
-+}VLYNQ_DRV_STATE;
-+
-+
-+/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */
-+typedef enum
-+{
-+   VLYNQ_BUS_WIDTH_3 =  3,
-+   VLYNQ_BUS_WIDTH_5 =  5,
-+   VLYNQ_BUS_WIDTH_7 =  7,
-+   VLYNQ_BUS_WIDTH_9 =  9
-+}VLYNQ_BUS_WIDTH;
-+
-+
-+/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq 
-+ * interrupts are processed by the host or passed on to the 
-+ * remote device.
-+ */
-+typedef enum
-+{
-+    VLYNQ_INT_REMOTE = 0,   /* Interrupt packets sent to remote, intlocal=0 */
-+    VLYNQ_INT_LOCAL  = 1    /* Interrupts are handled locally, intlocal=1 */
-+}VLYNQ_LOCAL_INT_CONFIG;        
-+
-+
-+/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote 
-+ * interrupts are to be handled by the SOC system ISR 
-+ * or via the vlynq root ISR
-+ */
-+typedef enum 
-+{
-+    VLYNQ_INT_ROOT_ISR   = 0,   /* remote ints handled via vlynq root ISR */
-+    VLYNQ_INT_SYSTEM_ISR = 1    /* remote ints handled via system ISR */
-+}VLYNQ_REMOTE_INT_CONFIG;
-+
-+
-+/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */
-+typedef enum
-+{
-+    VLYNQ_INTR_ACTIVE_HIGH = 0,
-+    VLYNQ_INTR_ACTIVE_LOW  = 1
-+}VLYNQ_INTR_POLARITY;
-+
-+
-+/* VLYNQ_INTR_TYPE  - vlynq interrupt type */
-+typedef enum
-+{
-+    VLYNQ_INTR_LEVEL  = 0,
-+    VLYNQ_INTR_PULSED = 1
-+}VLYNQ_INTR_TYPE;
-+
-+
-+/* VLYNQ_RESET_MODE - vlynq reset mode */
-+typedef enum
-+{
-+   VLYNQ_RESET_ASSERT,      /* hold device in reset state */
-+   VLYNQ_RESET_DEASSERT,    /* release device from reset state */
-+   VLYNQ_RESET_INITFAIL,    /* handle the device in case driver initialization fails */
-+   VLYNQ_RESET_LINKESTABLISH,  /* handle the device in case driver established link */
-+   VLYNQ_RESET_INITFAIL2,   /* Driver initialization failed but VLYNQ link exist. */
-+   VLYNQ_RESET_INITOK       /* Driver initialization finished OK. */
-+}VLYNQ_RESET_MODE;
-+ 
-+
-+
-+/*************************************
-+ *             Typedefs              *
-+ *************************************/
-+
-+struct VLYNQ_DEV_t; /*forward declaration*/
-+
-+/*--------Function Pointers defintions -----------*/
-+
-+/* prototype for interrupt handler definition */
-+typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3);
-+
-+typedef void 
-+(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode);
-+
-+typedef void 
-+(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev,   /* This VLYNQ */
-+                    VLYNQ_DEV_TYPE  aSrcDvc,    /* Event Cause -local/remote? */
-+                    unsigned int  dwStatRegVal);      /* Value of the relevant status register */
-+
-+
-+/*-------Structure Definitions------------*/
-+
-+typedef struct VLYNQ_MEMORY_MAP_t
-+{
-+    unsigned int Txmap;
-+    unsigned int RxOffset[VLYNQ_MAX_MEMORY_REGIONS];
-+    unsigned int RxSize[VLYNQ_MAX_MEMORY_REGIONS];
-+}VLYNQ_MEMORY_MAP;
-+
-+
-+/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt
-+ * settings in vlynq Control register  */ 
-+typedef struct VLYNQ_INTERRUPT_CNTRL_t
-+{
-+    /* vlynq interrupts handled by host or remote - maps to 
-+     * intLocal bit in vlynq control register */
-+    VLYNQ_LOCAL_INT_CONFIG intLocal;
-+
-+    /* remote interrupts handled by vlynq isr or host system
-+     * interrupt controller - maps to the int2Cfg in vlynq 
-+     * control register */
-+    VLYNQ_REMOTE_INT_CONFIG intRemote;
-+    
-+    /* bit in pending/set register used for module interrupts*/
-+    unsigned int map_vector;
-+    
-+    /* used only if remote interrupts are to be handled by system ISR*/    
-+    unsigned int intr_ptr;
-+
-+}VLYNQ_INTERRUPT_CNTRL;
-+
-+
-+/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold
-+ * the interrupt dispatch table. The vlynq_root_isr() indexes into this 
-+ * table to identify the ISR to be invoked
-+ */
-+typedef struct VLYNQ_INTR_CNTRL_ICB_t
-+{
-+    VLYNQ_INTR_CNTRL_ISR            isr;    /* Clear errors during initialization */
-+    void                            *arg1 ; /* Arg 1 for the ISR */
-+    void                            *arg2 ; /* Arg 2 for the ISR */
-+    void                            *arg3 ; /* Arg 3 for the ISR */
-+    unsigned int  isrCount; /* number of ISR invocations so far */
-+    struct VLYNQ_INTR_CNTRL_ICB_t   *next;
-+}VLYNQ_INTR_CNTRL_ICB;
-+
-+/* overlay of vlynq register set */
-+typedef struct VLYNQ_REG_SET_t
-+{
-+    unsigned int revision; /*offset : 0x00 */
-+    unsigned int control;  /* 0x04*/
-+    unsigned int status;   /* 0x08*/
-+    unsigned int pad1;     /* 0x0c*/
-+    unsigned int intStatus;   /*0x10*/
-+    unsigned int intPending;  /*0x14*/
-+    unsigned int intPtr;      /*0x18*/
-+    unsigned int txMap;       /*0x1C*/ 
-+    unsigned int rxSize1;     /*0x20*/
-+    unsigned int rxOffset1;   /*0x24*/
-+    unsigned int rxSize2;     /*0x28*/
-+    unsigned int rxOffset2;   /*0x2C*/
-+    unsigned int rxSize3;     /*0x30*/
-+    unsigned int rxOffset3;   /*0x34*/
-+    unsigned int rxSize4;     /*0x38*/
-+    unsigned int rxOffset4;   /*0x3C*/
-+    unsigned int chipVersion; /*0x40*/
-+    unsigned int pad2[8];
-+    unsigned int ivr30;       /*0x60*/
-+    unsigned int ivr74;       /*0x64*/
-+    unsigned int pad3[7];
-+}VLYNQ_REG_SET;
-+    
-+
-+typedef struct VLYNQ_DEV_t
-+{
-+    /** module index:1,2,3... used for debugging purposes */
-+    unsigned int dev_idx; 
-+    
-+    /*VLYNQ module base address */
-+    unsigned int module_base;
-+   
-+    /* clock source selection */
-+    VLYNQ_CLK_SOURCE clk_source;
-+   
-+    /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */
-+    unsigned int  clk_div;
-+   
-+    /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */
-+    VLYNQ_DRV_STATE state;
-+   
-+    /* Valid VLYNQ bus width, filled by driver  */
-+    VLYNQ_BUS_WIDTH width;
-+   
-+    /* local memory mapping   */
-+    VLYNQ_MEMORY_MAP local_mem;
-+   
-+    /* remote memory mapping   */
-+    VLYNQ_MEMORY_MAP remote_mem;
-+   
-+    /* Local module interrupt params */
-+    VLYNQ_INTERRUPT_CNTRL  local_irq;
-+   
-+    /* remote module interrupt params */
-+    VLYNQ_INTERRUPT_CNTRL  remote_irq;
-+
-+    /*** ICB related fields **/
-+   
-+    /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) + 
-+     * expansion slots for shared interrupts*/
-+    VLYNQ_INTR_CNTRL_ICB  pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS];
-+    VLYNQ_INTR_CNTRL_ICB  *freelist;
-+   
-+   /* table holding mapping between intVector and the bit position the interrupt
-+    * is mapped to(mapVector)*/
-+    char vector_map[32];
-+   
-+    /* user callback for vlynq events, NULL if unused */
-+    VLYNQ_REPORT_CB        report_cb;    
-+    
-+   /* user callback for resetting/realeasing remote device */
-+    VLYNQ_RESET_REMOTE     reset_cb;
-+
-+    /*** Handles provided for direct access to register set if need be
-+     * Must be intialized to point to appropriate address during 
-+     * vlynq_init */
-+    volatile VLYNQ_REG_SET * local;
-+    volatile VLYNQ_REG_SET * remote;
-+
-+    unsigned int  intCount; /* number of interrupts generated so far */
-+    unsigned int  isrCount; /* number of ISR invocations so far */
-+}VLYNQ_DEV;
-+
-+
-+typedef struct VLYNQ_ISR_ARGS_t
-+{
-+    int irq;
-+    void * arg;
-+    void * regset;
-+}VLYNQ_ISR_ARGS;
-+
-+
-+/****************************************
-+ *        Function Prototypes           *
-+ * API exported by generic vlynq driver *
-+ ****************************************/
-+/* Initialization function */ 
-+int vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options);
-+
-+/* Check vlynq link */
-+unsigned int vlynq_link_check( VLYNQ_DEV * pdev);
-+
-+/* Set interrupt vector in local or remote device */
-+int vlynq_interrupt_vector_set( VLYNQ_DEV *pdev, 
-+                                         unsigned int int_vector,
-+                                         unsigned int map_vector, 
-+                                         VLYNQ_DEV_TYPE dev,
-+                                         VLYNQ_INTR_POLARITY pol,
-+                                         VLYNQ_INTR_TYPE type);
-+
-+
-+int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
-+                                          unsigned int int_vector,
-+                                          VLYNQ_DEV_TYPE dev,
-+                                          unsigned int enable);
-+
-+unsigned int vlynq_interrupt_get_count( VLYNQ_DEV *pdev,
-+                                         unsigned int map_vector);
-+
-+int vlynq_install_isr( VLYNQ_DEV *pdev,
-+                                unsigned int map_vector,
-+                                VLYNQ_INTR_CNTRL_ISR isr,
-+                                void *arg1, void *arg2, void *arg3);
-+
-+int vlynq_uninstall_isr( VLYNQ_DEV *pdev,
-+                                  unsigned int map_vector,
-+                                  void *arg1, void *arg2, void *arg3);
-+
-+
-+void vlynq_root_isr(void *arg);
-+
-+void vlynq_delay(unsigned int clktime);
-+
-+/* The following functions, provide better granularity in setting
-+ * interrupt parameters. (for better support of linux INT Controller)
-+ * Note: The interrupt source is identified by "map_vector"- the bit 
-+ * position in interrupt status register*/
-+
-+int vlynq_interrupt_vector_map(VLYNQ_DEV * pdev,
-+                                        VLYNQ_DEV_TYPE dev,
-+                                        unsigned int int_vector,
-+                                        unsigned int map_vector);
-+
-+int vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev,
-+                                          VLYNQ_DEV_TYPE dev,
-+                                          unsigned int map_vector,
-+                                          VLYNQ_INTR_POLARITY pol);
-+
-+int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
-+                                           VLYNQ_DEV_TYPE dev_type,
-+                                           unsigned int map_vector);
-+
-+int vlynq_interrupt_set_type(VLYNQ_DEV * pdev,
-+                                      VLYNQ_DEV_TYPE dev,
-+                                      unsigned int map_vector,
-+                                      VLYNQ_INTR_TYPE type);
-+
-+int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, 
-+                                       VLYNQ_DEV_TYPE dev_type,
-+                                       unsigned int map_vector);
-+
-+int vlynq_interrupt_enable(VLYNQ_DEV* pdev,
-+                                    VLYNQ_DEV_TYPE dev,
-+                                    unsigned int map_vector);
-+
-+int vlynq_interrupt_disable(VLYNQ_DEV * pdev,
-+                                     VLYNQ_DEV_TYPE dev,
-+                                     unsigned int map_vector);
-+                 
-+
-+              
-+        
-+
-+#endif /* _VLYNQ_HAL_H_ */
-diff -urN linux.old/include/asm-mips/ar7/vlynq_hal.h linux.dev/include/asm-mips/ar7/vlynq_hal.h
---- linux.old/include/asm-mips/ar7/vlynq_hal.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/vlynq_hal.h	2005-11-10 01:10:46.095590250 +0100
-@@ -0,0 +1,606 @@
-+/***************************************************************************
-+**+----------------------------------------------------------------------+**
-+**|                                ****                                  |**
-+**|                                ****                                  |**
-+**|                                ******o***                            |**
-+**|                          ********_///_****                           |**
-+**|                           ***** /_//_/ ****                          |**
-+**|                            ** ** (__/ ****                           |**
-+**|                                *********                             |**
-+**|                                 ****                                 |**
-+**|                                  ***                                 |**
-+**|                                                                      |**
-+**|     Copyright (c) 2003 Texas Instruments Incorporated                |**
-+**|                        ALL RIGHTS RESERVED                           |**
-+**|                                                                      |**
-+**| Permission is hereby granted to licensees of Texas Instruments       |**
-+**| Incorporated (TI) products to use this computer program for the sole |**
-+**| purpose of implementing a licensee product based on TI products.     |**
-+**| No other rights to reproduce, use, or disseminate this computer      |**
-+**| program, whether in part or in whole, are granted.                   |**
-+**|                                                                      |**
-+**| TI makes no representation or warranties with respect to the         |**
-+**| performance of this computer program, and specifically disclaims     |**
-+**| any responsibility for any damages, special or consequential,        |**
-+**| connected with the use of this program.                              |**
-+**|                                                                      |**
-+**+----------------------------------------------------------------------+**
-+***************************************************************************/
-+
-+/*********************************************************************************
-+ *  ------------------------------------------------------------------------------
-+ *   Module      : vlynq_hal.h
-+ *   Description :
-+ *   This header file provides the set of functions exported by the 
-+ *   VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper.
-+ *  ------------------------------------------------------------------------------
-+ *********************************************************************************/
-+
-+#ifndef _VLYNQ_HAL_H_
-+#define _VLYNQ_HAL_H_
-+
-+#include <asm/ar7/avalanche_types.h>
-+#include <asm/ar7/vlynq_hal_params.h>
-+
-+#ifndef PRIVATE 
-+#define PRIVATE static
-+#endif
-+
-+#ifndef GLOBAL
-+#define GLOBAL
-+#endif
-+
-+/* Enable/Disable debug feature */
-+#undef VLYNQ_DEBUG 
-+
-+#ifdef VLYNQ_DEBUG  /* This needs to be OS abstracted - for testing use vxworks/linux calls */
-+#define debugPrint(format,args...)    
-+#else 
-+#define debugPrint(format,args...)  
-+#endif
-+
-+/* Error defines */
-+#define VLYNQ_SUCCESS               0
-+
-+#define VLYNQ_ERRCODE_BASE          0 /* Chosen by system */
-+#define VLYNQ_INVALID_ARG          -(VLYNQ_ERRCODE_BASE+1)
-+#define VLYNQ_INVALID_DRV_STATE    -(VLYNQ_ERRCODE_BASE+2)
-+#define VLYNQ_INT_CONFIG_ERR       -(VLYNQ_ERRCODE_BASE+3)
-+#define VLYNQ_LINK_DOWN            -(VLYNQ_ERRCODE_BASE+4)
-+#define VLYNQ_MEMALLOC_FAIL        -(VLYNQ_ERRCODE_BASE+5)
-+#define VLYNQ_ISR_NON_EXISTENT     -(VLYNQ_ERRCODE_BASE+6)
-+#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7)
-+
-+/* Vlynq Defines and Macros */
-+
-+#define VLYNQ_NUM_INT_BITS              32 /* 32 bit interrupt staus register */
-+
-+/* Base address of module */
-+#define VLYNQ_BASE                      (pdev->module_base)
-+
-+#define VLYNQ_REMOTE_REGS_OFFSET        0x0080
-+
-+#define VLYNQ_REV_OFFSET                0x0000
-+#define VLYNQ_CTRL_OFFSET               0x0004
-+#define VLYNQ_STATUS_OFFSET             0x0008
-+#define VLYNQ_INT_STAT_OFFSET           0x0010
-+#define VLYNQ_INT_PEND_OFFSET           0x0014
-+#define VLYNQ_INT_PTR_OFFSET            0x0018
-+#define VLYNQ_TXMAP_OFFSET              0x001c
-+
-+#define VLYNQ_RX0MAP_SIZE_REG_OFFSET    0x0020
-+#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET  0x0024
-+
-+#define VLYNQ_CHIP_VER_OFFSET           0x0040
-+#define VLYNQ_IVR_REGS_OFFSET           0x0060
-+
-+#define VLYNQ_INT_PENDING_REG_PTR       0x14
-+#define VLYNQ_R_INT_PENDING_REG_PTR     VLYNQ_REMOTE_REGS_OFFSET + 0x14
-+
-+#define VLYNQ_REV_REG       *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_REV_OFFSET))
-+#define VLYNQ_CTRL_REG      *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET))
-+#define VLYNQ_STATUS_REG    *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET))
-+#define VLYNQ_INT_STAT_REG  *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET))
-+#define VLYNQ_INT_PEND_REG  *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET))
-+#define VLYNQ_INT_PTR_REG   *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET))
-+#define VLYNQ_TXMAP_REG     *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET))
-+
-+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
-+#define VLYNQ_RXMAP_SIZE_REG(map) \
-+    *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3)))
-+    
-+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
-+#define VLYNQ_RXMAP_OFFSET_REG(map) \
-+    *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3)))
-+
-+#define VLYNQ_CHIP_VER_REG  *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET))
-+
-+/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */
-+#define VLYNQ_IVR_OFFSET(ivr)  \
-+    (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) )
-+
-+#define VLYNQ_IVR_03TO00_REG  *((volatile UINT32*) (VLYNQ_IVR_OFFSET(0)) )
-+#define VLYNQ_IVR_07TO04_REG  *((volatile UINT32*) (VLYNQ_IVR_OFFSET(4)) )
-+/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
-+
-+#define VLYNQ_IVR_INTEN(ivr)    (((UINT32)(0x80)) << ((((unsigned)(ivr)) % 4) * 8))
-+#define VLYNQ_IVR_INTTYPE(ivr)  (((UINT32)(0x40)) << ((((unsigned)(ivr)) % 4) * 8))
-+#define VLYNQ_IVR_INTPOL(ivr)   (((UINT32)(0x20)) << ((((unsigned)(ivr)) % 4) * 8))
-+#define VLYNQ_IVR_INTVEC(ivr)   (((UINT32)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8))
-+#define VLYNQ_IVR_INTALL(ivr)   (((UINT32)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8))
-+
-+
-+
-+/*********************************
-+ * Remote VLYNQ register set     *
-+ *********************************/
-+
-+#define VLYNQ_R_REV_OFFSET              0x0080
-+#define VLYNQ_R_CTRL_OFFSET             0x0084
-+#define VLYNQ_R_STATUS_OFFSET           0x0088
-+#define VLYNQ_R_INT_STAT_OFFSET         0x0090
-+#define VLYNQ_R_INT_PEND_OFFSET         0x0094
-+#define VLYNQ_R_INT_PTR_OFFSET          0x0098
-+#define VLYNQ_R_TXMAP_OFFSET            0x009c
-+
-+#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET  0x00A0
-+#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4
-+
-+#define VLYNQ_R_CHIP_VER_OFFSET         0x00C0
-+#define VLYNQ_R_IVR_REGS_OFFSET         0x00E0
-+
-+#define VLYNQ_R_REV_REG       *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET)) 
-+#define VLYNQ_R_CTRL_REG      *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET))
-+#define VLYNQ_R_STATUS_REG    *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET))
-+#define VLYNQ_R_INT_STAT_REG  *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET))
-+#define VLYNQ_R_INT_PEND_REG  *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET))
-+#define VLYNQ_R_INT_PTR_REG   *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET))
-+#define VLYNQ_R_TXMAP_REG     *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET))
-+
-+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
-+#define VLYNQ_R_RXMAP_SIZE_REG(map) \
-+    *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3)))
-+    
-+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
-+#define VLYNQ_R_RXMAP_OFFSET_REG(map) \
-+    *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3)))
-+
-+#define VLYNQ_R_CHIP_VER_REG  *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET)
-+
-+#define VLYNQ_R_IVR_OFFSET(ivr)  \
-+    (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3))
-+ 
-+
-+/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
-+#define VLYNQ_R_IVR_03TO00_REG  *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(0)) )
-+#define VLYNQ_R_IVR_07TO04_REG  *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(4)) )
-+
-+
-+/****End of remote register set definition******/
-+
-+
-+/*** Masks for individual register fields ***/
-+
-+#define VLYNQ_MODULE_ID_MASK        0xffff0000
-+#define VLYNQ_MAJOR_REV_MASK        0x0000ff00
-+#define VLYNQ_MINOR_REV_MASK        0x000000ff
-+
-+    
-+#define VLYNQ_CTL_ILOOP_MASK        0x00000002
-+#define VLYNQ_CTL_INT2CFG_MASK      0x00000080
-+#define VLYNQ_CTL_INTVEC_MASK       0x00001f00
-+#define VLYNQ_CTL_INTEN_MASK        0x00002000
-+#define VLYNQ_CTL_INTLOCAL_MASK     0x00004000
-+#define VLYNQ_CTL_CLKDIR_MASK       0x00008000
-+#define VLYNQ_CTL_CLKDIV_MASK       0x00070000
-+#define VLYNQ_CTL_MODE_MASK         0x00e00000
-+
-+
-+#define VLYNQ_STS_LINK_MASK         0x00000001  /* Link is active */
-+#define VLYNQ_STS_MPEND_MASK        0x00000002  /* Pending master requests */
-+#define VLYNQ_STS_SPEND_MASK        0x00000004  /* Pending slave requests */
-+#define VLYNQ_STS_NFEMPTY0_MASK     0x00000008  /* Master data FIFO not empty */
-+#define VLYNQ_STS_NFEMPTY1_MASK     0x00000010  /* Master command FIFO not empty */
-+#define VLYNQ_STS_NFEMPTY2_MASK     0x00000020  /* Slave data FIFO not empty */
-+#define VLYNQ_STS_NFEMPTY3_MASK     0x00000040  /* Slave command FIFO not empty */
-+#define VLYNQ_STS_LERROR_MASK       0x00000080  /* Local error, w/c */
-+#define VLYNQ_STS_RERROR_MASK       0x00000100  /* remote error w/c */
-+#define VLYNQ_STS_OFLOW_MASK        0x00000200
-+#define VLYNQ_STS_IFLOW_MASK        0x00000400
-+#define VLYNQ_STS_MODESUP_MASK      0x00E00000  /* Highest mode supported */
-+#define VLYNQ_STS_SWIDTH_MASK       0x07000000  /* Used for reading the width of VLYNQ bus */
-+#define VLYNQ_STS_DEBUG_MASK        0xE0000000 
-+
-+#define VLYNQ_CTL_INTVEC_SHIFT      0x08
-+#define VLYNQ_CTL_INTEN_SHIFT       0x0D
-+#define VLYNQ_CTL_INT2CFG_SHIFT     0x07
-+#define VLYNQ_CTL_INTLOCAL_SHIFT    0x0E
-+
-+#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK  0x7F80
-+
-+#define VLYNQ_CHIPVER_DEVREV_MASK   0xffff0000
-+#define VLYNQ_CHIPVER_DEVID_MASK    0x0000ffff
-+
-+#define VLYNQ_IVR_INTEN_MASK        0x80
-+#define VLYNQ_IVR_INTTYPE_MASK      0x40
-+#define VLYNQ_IVR_INTPOL_MASK       0x20
-+
-+
-+/**** Helper macros ****/
-+
-+#define VLYNQ_RESETCB(arg) \
-+   if( pdev->reset_cb != NULL)   \
-+   {                             \
-+      (pdev->reset_cb)(pdev, (arg));  \
-+   }
-+    
-+#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 )
-+#define VLYNQ_CTL_INTVEC(x)         (((x) & 31) << 8 )
-+
-+#define VLYNQ_INRANGE(x,hi,lo)      (((x) <= (hi)) && ((x) >= (lo)))
-+#define VLYNQ_OUTRANGE(x,hi,lo)     (((x) > (hi)) || ((x) < (lo)))
-+
-+#define VLYNQ_ALIGN4(x)             (x)=(x)&(~3)   
-+
-+
-+/*************************************
-+ *             Enums                 *
-+ *************************************/
-+
-+/* Initialization options define what operations are
-+ * undertaken during vlynq module initialization */
-+typedef enum
-+{
-+    /* Init host local memory regions.This allows
-+     * local host access remote memory regions */
-+    VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01,
-+    /* Init host remote memory regions.This allows
-+     * remote device access local memory regions */
-+    VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02,
-+    /* Init local interrupt config*/
-+    VLYNQ_INIT_LOCAL_INTERRUPTS   =0x04,
-+    /* Init remote interrupt config*/
-+    VLYNQ_INIT_REMOTE_INTERRUPTS  =0x08,
-+    /* Check link during initialization*/
-+    VLYNQ_INIT_CHECK_LINK         =0x10,
-+    /* configure clock during init */
-+    VLYNQ_INIT_CONFIG_CLOCK       =0x20,
-+    /* Clear errors during init */    
-+    VLYNQ_INIT_CLEAR_ERRORS       =0x40,
-+    /* All options */
-+    VLYNQ_INIT_PERFORM_ALL        =0x7F
-+}VLYNQ_INIT_OPTIONS;
-+
-+
-+/* VLYNQ_DEV_TYPE identifies local or remote device */
-+typedef enum
-+{
-+    VLYNQ_LOCAL_DVC  = 0,           /* vlynq local device (SOC's vlynq module) */
-+    VLYNQ_REMOTE_DVC = 1            /* vlynq remote device (remote vlynq module) */
-+}VLYNQ_DEV_TYPE;
-+
-+
-+/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */
-+typedef enum
-+{
-+    VLYNQ_CLK_SOURCE_NONE   = 0,    /* do not initialize clock generator*/
-+    VLYNQ_CLK_SOURCE_LOCAL  = 1,    /* clock is generated by local machine  */
-+    VLYNQ_CLK_SOURCE_REMOTE = 2     /* clock is generated by remote machine */
-+}VLYNQ_CLK_SOURCE;
-+
-+
-+/* VLYNQ_DRV_STATE indicates the current driver state */
-+typedef enum
-+{
-+    VLYNQ_DRV_STATE_UNINIT = 0,     /* driver is uninitialized  */
-+    VLYNQ_DRV_STATE_ININIT = 1,     /* VLYNQ is being initialized */
-+    VLYNQ_DRV_STATE_RUN    = 2,     /* VLYNQ is running properly  */
-+    VLYNQ_DRV_STATE_HOLD   = 3,     /* driver stopped temporarily */
-+    VLYNQ_DRV_STATE_ERROR  = 4      /* driver stopped on unrecoverable error */
-+}VLYNQ_DRV_STATE;
-+
-+
-+/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */
-+typedef enum
-+{
-+   VLYNQ_BUS_WIDTH_3 =  3,
-+   VLYNQ_BUS_WIDTH_5 =  5,
-+   VLYNQ_BUS_WIDTH_7 =  7,
-+   VLYNQ_BUS_WIDTH_9 =  9
-+}VLYNQ_BUS_WIDTH;
-+
-+
-+/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq 
-+ * interrupts are processed by the host or passed on to the 
-+ * remote device.
-+ */
-+typedef enum
-+{
-+    VLYNQ_INT_REMOTE = 0,   /* Interrupt packets sent to remote, intlocal=0 */
-+    VLYNQ_INT_LOCAL  = 1    /* Interrupts are handled locally, intlocal=1 */
-+}VLYNQ_LOCAL_INT_CONFIG;        
-+
-+
-+/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote 
-+ * interrupts are to be handled by the SOC system ISR 
-+ * or via the vlynq root ISR
-+ */
-+typedef enum 
-+{
-+    VLYNQ_INT_ROOT_ISR   = 0,   /* remote ints handled via vlynq root ISR */
-+    VLYNQ_INT_SYSTEM_ISR = 1    /* remote ints handled via system ISR */
-+}VLYNQ_REMOTE_INT_CONFIG;
-+
-+
-+/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */
-+typedef enum
-+{
-+    VLYNQ_INTR_ACTIVE_HIGH = 0,
-+    VLYNQ_INTR_ACTIVE_LOW  = 1
-+}VLYNQ_INTR_POLARITY;
-+
-+
-+/* VLYNQ_INTR_TYPE  - vlynq interrupt type */
-+typedef enum
-+{
-+    VLYNQ_INTR_LEVEL  = 0,
-+    VLYNQ_INTR_PULSED = 1
-+}VLYNQ_INTR_TYPE;
-+
-+
-+/* VLYNQ_RESET_MODE - vlynq reset mode */
-+typedef enum
-+{
-+   VLYNQ_RESET_ASSERT,      /* hold device in reset state */
-+   VLYNQ_RESET_DEASSERT,    /* release device from reset state */
-+   VLYNQ_RESET_INITFAIL,    /* handle the device in case driver initialization fails */
-+   VLYNQ_RESET_LINKESTABLISH,  /* handle the device in case driver established link */
-+   VLYNQ_RESET_INITFAIL2,   /* Driver initialization failed but VLYNQ link exist. */
-+   VLYNQ_RESET_INITOK       /* Driver initialization finished OK. */
-+}VLYNQ_RESET_MODE;
-+ 
-+
-+
-+/*************************************
-+ *             Typedefs              *
-+ *************************************/
-+
-+struct VLYNQ_DEV_t; /*forward declaration*/
-+
-+/*--------Function Pointers defintions -----------*/
-+
-+/* prototype for interrupt handler definition */
-+typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3);
-+
-+typedef void 
-+(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode);
-+
-+typedef void 
-+(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev,   /* This VLYNQ */
-+                    VLYNQ_DEV_TYPE  aSrcDvc,    /* Event Cause -local/remote? */
-+                    UINT32  dwStatRegVal);      /* Value of the relevant status register */
-+
-+
-+/*-------Structure Definitions------------*/
-+
-+typedef struct VLYNQ_MEMORY_MAP_t
-+{
-+    UINT32 Txmap;
-+    UINT32 RxOffset[VLYNQ_MAX_MEMORY_REGIONS];
-+    UINT32 RxSize[VLYNQ_MAX_MEMORY_REGIONS];
-+}VLYNQ_MEMORY_MAP;
-+
-+
-+/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt
-+ * settings in vlynq Control register  */ 
-+typedef struct VLYNQ_INTERRUPT_CNTRL_t
-+{
-+    /* vlynq interrupts handled by host or remote - maps to 
-+     * intLocal bit in vlynq control register */
-+    VLYNQ_LOCAL_INT_CONFIG intLocal;
-+
-+    /* remote interrupts handled by vlynq isr or host system
-+     * interrupt controller - maps to the int2Cfg in vlynq 
-+     * control register */
-+    VLYNQ_REMOTE_INT_CONFIG intRemote;
-+    
-+    /* bit in pending/set register used for module interrupts*/
-+    UINT32 map_vector;
-+    
-+    /* used only if remote interrupts are to be handled by system ISR*/    
-+    UINT32 intr_ptr;
-+
-+}VLYNQ_INTERRUPT_CNTRL;
-+
-+
-+/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold
-+ * the interrupt dispatch table. The vlynq_root_isr() indexes into this 
-+ * table to identify the ISR to be invoked
-+ */
-+typedef struct VLYNQ_INTR_CNTRL_ICB_t
-+{
-+    VLYNQ_INTR_CNTRL_ISR            isr;    /* Clear errors during initialization */
-+    void                            *arg1 ; /* Arg 1 for the ISR */
-+    void                            *arg2 ; /* Arg 2 for the ISR */
-+    void                            *arg3 ; /* Arg 3 for the ISR */
-+    UINT32  isrCount; /* number of ISR invocations so far */
-+    struct VLYNQ_INTR_CNTRL_ICB_t   *next;
-+}VLYNQ_INTR_CNTRL_ICB;
-+
-+/* overlay of vlynq register set */
-+typedef struct VLYNQ_REG_SET_t
-+{
-+    UINT32 revision; /*offset : 0x00 */
-+    UINT32 control;  /* 0x04*/
-+    UINT32 status;   /* 0x08*/
-+    UINT32 pad1;     /* 0x0c*/
-+    UINT32 intStatus;   /*0x10*/
-+    UINT32 intPending;  /*0x14*/
-+    UINT32 intPtr;      /*0x18*/
-+    UINT32 txMap;       /*0x1C*/ 
-+    UINT32 rxSize1;     /*0x20*/
-+    UINT32 rxOffset1;   /*0x24*/
-+    UINT32 rxSize2;     /*0x28*/
-+    UINT32 rxOffset2;   /*0x2C*/
-+    UINT32 rxSize3;     /*0x30*/
-+    UINT32 rxOffset3;   /*0x34*/
-+    UINT32 rxSize4;     /*0x38*/
-+    UINT32 rxOffset4;   /*0x3C*/
-+    UINT32 chipVersion; /*0x40*/
-+    UINT32 pad2[8];
-+    UINT32 ivr30;       /*0x60*/
-+    UINT32 ivr74;       /*0x64*/
-+    UINT32 pad3[7];
-+}VLYNQ_REG_SET;
-+    
-+
-+typedef struct VLYNQ_DEV_t
-+{
-+    /** module index:1,2,3... used for debugging purposes */
-+    UINT32 dev_idx; 
-+    
-+    /*VLYNQ module base address */
-+    UINT32 module_base;
-+   
-+    /* clock source selection */
-+    VLYNQ_CLK_SOURCE clk_source;
-+   
-+    /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */
-+    UINT32  clk_div;
-+   
-+    /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */
-+    VLYNQ_DRV_STATE state;
-+   
-+    /* Valid VLYNQ bus width, filled by driver  */
-+    VLYNQ_BUS_WIDTH width;
-+   
-+    /* local memory mapping   */
-+    VLYNQ_MEMORY_MAP local_mem;
-+   
-+    /* remote memory mapping   */
-+    VLYNQ_MEMORY_MAP remote_mem;
-+   
-+    /* Local module interrupt params */
-+    VLYNQ_INTERRUPT_CNTRL  local_irq;
-+   
-+    /* remote module interrupt params */
-+    VLYNQ_INTERRUPT_CNTRL  remote_irq;
-+
-+    /*** ICB related fields **/
-+   
-+    /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) + 
-+     * expansion slots for shared interrupts*/
-+    VLYNQ_INTR_CNTRL_ICB  pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS];
-+    VLYNQ_INTR_CNTRL_ICB  *freelist;
-+   
-+   /* table holding mapping between intVector and the bit position the interrupt
-+    * is mapped to(mapVector)*/
-+    INT8 vector_map[32];
-+   
-+    /* user callback for vlynq events, NULL if unused */
-+    VLYNQ_REPORT_CB        report_cb;    
-+    
-+   /* user callback for resetting/realeasing remote device */
-+    VLYNQ_RESET_REMOTE     reset_cb;
-+
-+    /*** Handles provided for direct access to register set if need be
-+     * Must be intialized to point to appropriate address during 
-+     * vlynq_init */
-+    volatile VLYNQ_REG_SET * local;
-+    volatile VLYNQ_REG_SET * remote;
-+
-+    UINT32  intCount; /* number of interrupts generated so far */
-+    UINT32  isrCount; /* number of ISR invocations so far */
-+}VLYNQ_DEV;
-+
-+
-+typedef struct VLYNQ_ISR_ARGS_t
-+{
-+    int irq;
-+    void * arg;
-+    void * regset;
-+}VLYNQ_ISR_ARGS;
-+
-+
-+/****************************************
-+ *        Function Prototypes           *
-+ * API exported by generic vlynq driver *
-+ ****************************************/
-+/* Initialization function */ 
-+GLOBAL INT32 vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options);
-+
-+/* Check vlynq link */
-+GLOBAL UINT32 vlynq_link_check( VLYNQ_DEV * pdev);
-+
-+/* Set interrupt vector in local or remote device */
-+GLOBAL INT32 vlynq_interrupt_vector_set( VLYNQ_DEV *pdev, 
-+                                         UINT32 int_vector,
-+                                         UINT32 map_vector, 
-+                                         VLYNQ_DEV_TYPE dev,
-+                                         VLYNQ_INTR_POLARITY pol,
-+                                         VLYNQ_INTR_TYPE type);
-+
-+
-+GLOBAL INT32 vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
-+                                          UINT32 int_vector,
-+                                          VLYNQ_DEV_TYPE dev,
-+                                          UINT32 enable);
-+
-+GLOBAL UINT32 vlynq_interrupt_get_count( VLYNQ_DEV *pdev,
-+                                         UINT32 map_vector);
-+
-+GLOBAL INT32 vlynq_install_isr( VLYNQ_DEV *pdev,
-+                                UINT32 map_vector,
-+                                VLYNQ_INTR_CNTRL_ISR isr,
-+                                void *arg1, void *arg2, void *arg3);
-+
-+GLOBAL INT32 vlynq_uninstall_isr( VLYNQ_DEV *pdev,
-+                                  UINT32 map_vector,
-+                                  void *arg1, void *arg2, void *arg3);
-+
-+
-+GLOBAL void vlynq_root_isr(void *arg);
-+
-+GLOBAL void vlynq_delay(UINT32 clktime);
-+
-+/* The following functions, provide better granularity in setting
-+ * interrupt parameters. (for better support of linux INT Controller)
-+ * Note: The interrupt source is identified by "map_vector"- the bit 
-+ * position in interrupt status register*/
-+
-+GLOBAL INT32 vlynq_interrupt_vector_map(VLYNQ_DEV * pdev,
-+                                        VLYNQ_DEV_TYPE dev,
-+                                        UINT32 int_vector,
-+                                        UINT32 map_vector);
-+
-+GLOBAL INT32 vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev,
-+                                          VLYNQ_DEV_TYPE dev,
-+                                          UINT32 map_vector,
-+                                          VLYNQ_INTR_POLARITY pol);
-+
-+GLOBAL INT32 vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
-+                                           VLYNQ_DEV_TYPE dev_type,
-+                                           UINT32 map_vector);
-+
-+GLOBAL INT32 vlynq_interrupt_set_type(VLYNQ_DEV * pdev,
-+                                      VLYNQ_DEV_TYPE dev,
-+                                      UINT32 map_vector,
-+                                      VLYNQ_INTR_TYPE type);
-+
-+GLOBAL INT32 vlynq_interrupt_get_type( VLYNQ_DEV *pdev, 
-+                                       VLYNQ_DEV_TYPE dev_type,
-+                                       UINT32 map_vector);
-+
-+GLOBAL INT32 vlynq_interrupt_enable(VLYNQ_DEV* pdev,
-+                                    VLYNQ_DEV_TYPE dev,
-+                                    UINT32 map_vector);
-+
-+GLOBAL INT32 vlynq_interrupt_disable(VLYNQ_DEV * pdev,
-+                                     VLYNQ_DEV_TYPE dev,
-+                                     UINT32 map_vector);
-+                 
-+
-+              
-+        
-+
-+#endif /* _VLYNQ_HAL_H_ */
-diff -urN linux.old/include/asm-mips/ar7/vlynq_hal_params.h linux.dev/include/asm-mips/ar7/vlynq_hal_params.h
---- linux.old/include/asm-mips/ar7/vlynq_hal_params.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/vlynq_hal_params.h	2005-11-10 01:10:46.095590250 +0100
-@@ -0,0 +1,50 @@
-+/***************************************************************************
-+**+----------------------------------------------------------------------+**
-+**|                                ****                                  |**
-+**|                                ****                                  |**
-+**|                                ******o***                            |**
-+**|                          ********_///_****                           |**
-+**|                           ***** /_//_/ ****                          |**
-+**|                            ** ** (__/ ****                           |**
-+**|                                *********                             |**
-+**|                                 ****                                 |**
-+**|                                  ***                                 |**
-+**|                                                                      |**
-+**|     Copyright (c) 2003 Texas Instruments Incorporated                |**
-+**|                        ALL RIGHTS RESERVED                           |**
-+**|                                                                      |**
-+**| Permission is hereby granted to licensees of Texas Instruments       |**
-+**| Incorporated (TI) products to use this computer program for the sole |**
-+**| purpose of implementing a licensee product based on TI products.     |**
-+**| No other rights to reproduce, use, or disseminate this computer      |**
-+**| program, whether in part or in whole, are granted.                   |**
-+**|                                                                      |**
-+**| TI makes no representation or warranties with respect to the         |**
-+**| performance of this computer program, and specifically disclaims     |**
-+**| any responsibility for any damages, special or consequential,        |**
-+**| connected with the use of this program.                              |**
-+**|                                                                      |**
-+**+----------------------------------------------------------------------+**
-+***************************************************************************/
-+
-+/* This file defines Vlynq module parameters*/
-+
-+#ifndef _VLYNQ_HAL_PARAMS_H
-+#define _VLYNQ_HAL_PARAMS_H
-+
-+ /* number of VLYNQ memory regions supported */
-+#define VLYNQ_MAX_MEMORY_REGIONS 0x04
-+  
-+ /* Max.number of external interrupt inputs supported by VLYNQ module */
-+#define VLYNQ_IVR_MAXIVR         0x08
-+
-+#define VLYNQ_CLK_DIV_MAX  0x08
-+#define VLYNQ_CLK_DIV_MIN  0x01
-+
-+
-+/*** the total number of entries allocated for ICB would be
-+ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/
-+#define VLYNQ_IVR_CHAIN_SLOTS 10
-+
-+
-+#endif /* _VLYNQ_HAL_PARAMS_H */
-diff -urN linux.old/include/asm-mips/io.h linux.dev/include/asm-mips/io.h
---- linux.old/include/asm-mips/io.h	2003-08-25 13:44:43.000000000 +0200
-+++ linux.dev/include/asm-mips/io.h	2005-11-10 01:14:16.400733500 +0100
-@@ -61,9 +61,9 @@
-  * Change "struct page" to physical address.
-  */
- #ifdef CONFIG_64BIT_PHYS_ADDR
--#define page_to_phys(page)	((u64)(page - mem_map) << PAGE_SHIFT)
-+#define page_to_phys(page)	(((u64)(page - mem_map) << PAGE_SHIFT) + PHYS_OFFSET)
- #else
--#define page_to_phys(page)	((page - mem_map) << PAGE_SHIFT)
-+#define page_to_phys(page)	(((page - mem_map) << PAGE_SHIFT) + PHYS_OFFSET)
- #endif
- 
- #define IO_SPACE_LIMIT 0xffff
-diff -urN linux.old/include/asm-mips/irq.h linux.dev/include/asm-mips/irq.h
---- linux.old/include/asm-mips/irq.h	2003-08-25 13:44:43.000000000 +0200
-+++ linux.dev/include/asm-mips/irq.h	2005-11-10 01:12:43.950955750 +0100
-@@ -14,7 +14,20 @@
- #include <linux/config.h>
- #include <linux/linkage.h>
- 
-+#ifdef CONFIG_AR7
-+/* MIPS   has 8 irqs
-+ * AR7    has 40 primary and 32 secondary irqs
-+ * vlynq0 has 32 irqs
-+ * vlynq1 has 32 irqs
-+ */
-+#ifdef CONFIG_AR7_VLYNQ
-+#define NR_IRQS (80 + 32 * CONFIG_AR7_VLYNQ_PORTS)
-+#else
-+#define NR_IRQS 80
-+#endif
-+#else
- #define NR_IRQS 128		/* Largest number of ints of all machines.  */
-+#endif
- 
- #ifdef CONFIG_I8259
- static inline int irq_cannonicalize(int irq)
-diff -urN linux.old/include/asm-mips/mips-boards/prom.h linux.dev/include/asm-mips/mips-boards/prom.h
---- linux.old/include/asm-mips/mips-boards/prom.h	2001-09-09 19:43:02.000000000 +0200
-+++ linux.dev/include/asm-mips/mips-boards/prom.h	2005-11-10 01:14:16.436735750 +0100
-@@ -33,7 +33,7 @@
- extern void prom_init_cmdline(void);
- extern void prom_meminit(void);
- extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
--extern void prom_free_prom_memory (void);
-+extern unsigned long prom_free_prom_memory (void);
- extern void mips_display_message(const char *str);
- extern void mips_display_word(unsigned int num);
- extern int get_ethernet_addr(char *ethernet_addr);
-diff -urN linux.old/include/asm-mips/page.h linux.dev/include/asm-mips/page.h
---- linux.old/include/asm-mips/page.h	2004-02-18 14:36:32.000000000 +0100
-+++ linux.dev/include/asm-mips/page.h	2005-11-10 01:14:16.436735750 +0100
-@@ -12,6 +12,7 @@
- 
- #include <linux/config.h>
- #include <asm/break.h>
-+#include <asm/addrspace.h>
- 
- #ifdef __KERNEL__
- 
-@@ -129,7 +130,7 @@
- 
- #define __pa(x)		((unsigned long) (x) - PAGE_OFFSET)
- #define __va(x)		((void *)((unsigned long) (x) + PAGE_OFFSET))
--#define virt_to_page(kaddr)	(mem_map + (__pa(kaddr) >> PAGE_SHIFT))
-+#define virt_to_page(kaddr)	(mem_map + ((__pa(kaddr)-PHYS_OFFSET) >> PAGE_SHIFT))
- #define VALID_PAGE(page)	((page - mem_map) < max_mapnr)
- 
- #define VM_DATA_DEFAULT_FLAGS  (VM_READ | VM_WRITE | VM_EXEC | \
-diff -urN linux.old/include/asm-mips/pgtable-32.h linux.dev/include/asm-mips/pgtable-32.h
---- linux.old/include/asm-mips/pgtable-32.h	2004-02-18 14:36:32.000000000 +0100
-+++ linux.dev/include/asm-mips/pgtable-32.h	2005-11-10 01:14:16.436735750 +0100
-@@ -108,7 +108,7 @@
-  * and a page entry and page directory to the page they refer to.
-  */
- 
--#ifdef CONFIG_CPU_VR41XX
-+#if defined(CONFIG_CPU_VR41XX)
- #define mk_pte(page, pgprot)                                            \
- ({                                                                      \
-         pte_t   __pte;                                                  \
-@@ -123,13 +123,14 @@
- ({									\
- 	pte_t   __pte;							\
- 									\
--	pte_val(__pte) = ((phys_t)(page - mem_map) << PAGE_SHIFT) | \
--	                 pgprot_val(pgprot);				\
-+	pte_val(__pte) = (((phys_t)(page - mem_map) << PAGE_SHIFT) +    \
-+			  PHYS_OFFSET) | pgprot_val(pgprot);            \
- 									\
- 	__pte;								\
- })
- #endif
- 
-+
- static inline pte_t mk_pte_phys(phys_t physpage, pgprot_t pgprot)
- {
- #ifdef CONFIG_CPU_VR41XX
-@@ -175,12 +176,12 @@
- 		set_pte(ptep, __pte(0));
- }
- 
--#ifdef CONFIG_CPU_VR41XX
-+#if defined(CONFIG_CPU_VR41XX)
- #define pte_page(x)  (mem_map+((unsigned long)(((x).pte_low >> (PAGE_SHIFT+2)))))
- #define __mk_pte(page_nr,pgprot) __pte(((page_nr) << (PAGE_SHIFT+2)) | pgprot_val(pgprot))
- #else
--#define pte_page(x)  (mem_map+((unsigned long)(((x).pte_low >> PAGE_SHIFT))))
--#define __mk_pte(page_nr,pgprot) __pte(((page_nr) << PAGE_SHIFT) | pgprot_val(pgprot))
-+#define pte_page(x)  (mem_map+((unsigned long)((((x).pte_low-PHYS_OFFSET) >> PAGE_SHIFT))))
-+#define __mk_pte(page_nr,pgprot) __pte((((page_nr) << PAGE_SHIFT)+PHYS_OFFSET)|pgprot_val(pgprot))
- #endif
- 
- #endif
-diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h
---- linux.old/include/asm-mips/serial.h	2005-01-19 15:10:12.000000000 +0100
-+++ linux.dev/include/asm-mips/serial.h	2005-11-10 01:14:16.436735750 +0100
-@@ -65,6 +65,16 @@
- 
- #define C_P(card,port) (((card)<<6|(port)<<3) + 1)
- 
-+#ifdef CONFIG_AR7
-+#include <asm/ar7/ar7.h>
-+#include <asm/ar7/avalanche_intc.h>
-+#define AR7_SERIAL_PORT_DEFNS  \
-+	{ 0, AR7_BASE_BAUD, AR7_UART0_REGS_BASE, LNXINTNUM(AVALANCHE_UART0_INT), STD_COM_FLAGS }, \
-+	{ 0, AR7_BASE_BAUD, AR7_UART1_REGS_BASE, LNXINTNUM(AVALANCHE_UART1_INT), STD_COM_FLAGS }, 
-+#else 
-+#define AR7_SERIAL_PORT_DEFNS
-+#endif
-+
- #ifdef CONFIG_MIPS_JAZZ
- #define _JAZZ_SERIAL_INIT(int, base)					\
- 	{ .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,	\
-@@ -468,6 +478,7 @@
- #endif
- 
- #define SERIAL_PORT_DFNS			\
-+	AR7_SERIAL_PORT_DEFNS			\
- 	ATLAS_SERIAL_PORT_DEFNS			\
- 	AU1000_SERIAL_PORT_DEFNS		\
- 	COBALT_SERIAL_PORT_DEFNS		\
diff --git a/openwrt/target/linux/ar7-2.4/patches/001-flash_map.patch b/openwrt/target/linux/ar7-2.4/patches/001-flash_map.patch
deleted file mode 100644
index 0b58439c8b..0000000000
--- a/openwrt/target/linux/ar7-2.4/patches/001-flash_map.patch
+++ /dev/null
@@ -1,307 +0,0 @@
-diff -urN linux.old/drivers/mtd/maps/ar7-flash.c linux.dev/drivers/mtd/maps/ar7-flash.c
---- linux.old/drivers/mtd/maps/ar7-flash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/mtd/maps/ar7-flash.c	2005-07-22 04:35:26.624453992 +0200
-@@ -0,0 +1,267 @@
-+/*
-+ * $Id$
-+ *
-+ * Normal mappings of chips in physical memory
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/io.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/config.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/squashfs_fs.h>
-+
-+#define WINDOW_ADDR CONFIG_MTD_AR7_START
-+#define WINDOW_SIZE CONFIG_MTD_AR7_LEN
-+#define BUSWIDTH CONFIG_MTD_AR7_BUSWIDTH
-+
-+#include <asm/mips-boards/prom.h>
-+extern char *prom_getenv(char *name);
-+
-+static int create_mtd_partitions(void);
-+static void __exit ar7_mtd_cleanup(void);
-+	
-+#define MAX_NUM_PARTITIONS 5
-+static struct mtd_partition ar7_partinfo[MAX_NUM_PARTITIONS];
-+
-+static struct mtd_info *ar7_mtd_info;
-+
-+__u8 ar7_read8(struct map_info *map, unsigned long ofs)
-+{
-+	return __raw_readb(map->map_priv_1 + ofs);
-+}
-+
-+__u16 ar7_read16(struct map_info *map, unsigned long ofs)
-+{
-+	return __raw_readw(map->map_priv_1 + ofs);
-+}
-+
-+__u32 ar7_read32(struct map_info *map, unsigned long ofs)
-+{
-+	return __raw_readl(map->map_priv_1 + ofs);
-+}
-+
-+void ar7_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-+{
-+	memcpy_fromio(to, map->map_priv_1 + from, len);
-+}
-+
-+void ar7_write8(struct map_info *map, __u8 d, unsigned long adr)
-+{
-+	__raw_writeb(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void ar7_write16(struct map_info *map, __u16 d, unsigned long adr)
-+{
-+	__raw_writew(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void ar7_write32(struct map_info *map, __u32 d, unsigned long adr)
-+{
-+	__raw_writel(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void ar7_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-+{
-+	memcpy_toio(map->map_priv_1 + to, from, len);
-+}
-+
-+struct map_info ar7_map = {
-+	name: "Physically mapped flash",
-+	size: WINDOW_SIZE,
-+	buswidth: BUSWIDTH,
-+	read8: ar7_read8,
-+	read16: ar7_read16,
-+	read32: ar7_read32,
-+	copy_from: ar7_copy_from,
-+	write8: ar7_write8,
-+	write16: ar7_write16,
-+	write32: ar7_write32,
-+	copy_to: ar7_copy_to
-+};
-+
-+int __init ar7_mtd_init(void)
-+{
-+	int partitions;
-+	
-+       	printk(KERN_NOTICE "ar7 flash device: 0x%lx at 0x%lx.\n", (unsigned long)WINDOW_SIZE, (unsigned long)WINDOW_ADDR);
-+	ar7_map.map_priv_1 = (unsigned long)ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
-+
-+	if (!ar7_map.map_priv_1) {
-+		printk("Failed to ioremap\n");
-+		return -EIO;
-+	}
-+	
-+	ar7_mtd_info = do_map_probe("cfi_probe", &ar7_map);
-+	if (!ar7_mtd_info)
-+	{
-+		ar7_mtd_cleanup();
-+		return -ENXIO;
-+	}
-+	
-+	ar7_mtd_info->module = THIS_MODULE;
-+
-+	if (!(partitions = create_mtd_partitions()))
-+		add_mtd_device(ar7_mtd_info);
-+	else		
-+		add_mtd_partitions(ar7_mtd_info, ar7_partinfo, partitions);
-+
-+	return 0;
-+}
-+
-+static char *strdup(char *str)
-+{
-+	int n = strlen(str)+1;
-+	char *s = kmalloc(n, GFP_KERNEL);
-+	if (!s) return NULL;
-+	return strcpy(s, str);
-+}
-+
-+
-+static int create_mtd_partitions(void)
-+{
-+	unsigned int offset;
-+	unsigned int size;
-+	unsigned int found = 0;
-+	unsigned int p = 0;
-+	unsigned char *flash_base;
-+	unsigned char *flash_end;
-+	char *env_ptr;
-+	char *base_ptr;
-+	char *end_ptr;
-+	unsigned int adam2_size = 0x20000;
-+	unsigned int config_offset = WINDOW_SIZE;
-+	unsigned int rootfs_start = 0xe0000;
-+
-+	printk("Parsing ADAM2 partition map...\n");
-+	
-+	do {
-+		char	env_name[20];
-+
-+		/* get base and end addresses of flash file system from environment */
-+		sprintf(env_name, "mtd%1u", p);
-+		printk("Looking for mtd device :%s:\n", env_name);
-+
-+		env_ptr = prom_getenv(env_name);
-+		if(env_ptr == NULL) {
-+			/* No more partitions to find */
-+			break;
-+		}
-+
-+		/* Extract the start and stop addresses of the partition */
-+		base_ptr = strtok(env_ptr, ",");
-+		end_ptr = strtok(NULL, ",");
-+		if ((base_ptr == NULL) || (end_ptr == NULL)) {	
-+			printk("ADAM2 partition error: Invalid %s start,end.\n", env_name);
-+			break;
-+		}
-+
-+		flash_base = (unsigned char*) simple_strtol(base_ptr, NULL, 0);
-+		flash_end = (unsigned char*) simple_strtol(end_ptr, NULL, 0);
-+		if((!flash_base) || (!flash_end)) {
-+			printk("ADAM2 partition error: Invalid %s start,end.\n", env_name);
-+			break;
-+		}
-+
-+		offset = virt_to_bus(flash_base) - WINDOW_ADDR;
-+		size = flash_end - flash_base;
-+		printk("Found a %s image (0x%x), with size (0x%x).\n",env_name, offset, size);
-+
-+		
-+		if (offset == 0) {
-+			printk("Assuming adam2 size of 0x%x\n", size);
-+			adam2_size = size; 			// boot loader
-+		} else if (offset > 0x120000) {
-+			if (config_offset > offset)
-+				config_offset = offset;		// reserved at the end of the flash chip
-+		} else if (offset > 0x30000) {
-+			printk("Assuming default rootfs offset of 0x%x\n", offset);
-+			rootfs_start = offset;			// probably root fs
-+		}
-+		
-+		p++;
-+	} while (p < MAX_NUM_PARTITIONS);
-+	
-+	p = 0;
-+	
-+	ar7_partinfo[p].name = strdup("adam2");
-+	ar7_partinfo[p].offset = 0;
-+	ar7_partinfo[p].size = adam2_size;
-+	ar7_partinfo[p++].mask_flags = 0;
-+
-+	ar7_partinfo[p].name = strdup("linux");
-+	ar7_partinfo[p].offset = adam2_size;
-+	ar7_partinfo[p].size = config_offset - adam2_size;
-+	ar7_partinfo[p++].mask_flags = 0;
-+
-+	if (ar7_read32(&ar7_map, adam2_size) == 0xfeedfa42) {
-+		rootfs_start = ar7_read32(&ar7_map, adam2_size + 4) + adam2_size + 28;
-+		printk("Setting new rootfs offset to %08x\n", rootfs_start);
-+	}
-+	
-+	ar7_partinfo[p].name = strdup("rootfs");
-+	ar7_partinfo[p].offset = rootfs_start;
-+	ar7_partinfo[p].size = config_offset - rootfs_start;
-+	
-+	ar7_partinfo[p++].mask_flags = 0;
-+
-+	ar7_partinfo[p].name = strdup("config");
-+	ar7_partinfo[p].offset = config_offset;
-+	ar7_partinfo[p].size = WINDOW_SIZE - config_offset;
-+	ar7_partinfo[p++].mask_flags = 0;
-+
-+	if (ar7_read32(&ar7_map, rootfs_start) == SQUASHFS_MAGIC) {
-+		int newsize, newoffset;
-+		struct squashfs_super_block sb;
-+
-+		ar7_copy_from(&ar7_map, &sb, rootfs_start, sizeof(sb));
-+		printk("Squashfs detected (size = 0x%08x)\n", sb.bytes_used);
-+		
-+		newoffset = rootfs_start + sb.bytes_used;
-+
-+		if ((newoffset % ar7_mtd_info->erasesize) > 0)
-+			newoffset += ar7_mtd_info->erasesize - (newoffset % ar7_mtd_info->erasesize);
-+		
-+		ar7_partinfo[p - 2].size = newoffset - rootfs_start;
-+		
-+		ar7_partinfo[p].name = strdup("OpenWrt");
-+		ar7_partinfo[p].offset = newoffset;
-+		ar7_partinfo[p].size = config_offset - newoffset;
-+		ar7_partinfo[p++].mask_flags = 0;
-+	} else {
-+		printk("Unknown filesystem. Moving rootfs partition to next erase block");
-+		if ((rootfs_start % ar7_mtd_info->erasesize) > 0) {
-+			ar7_partinfo[p - 2].offset += ar7_mtd_info->erasesize - (rootfs_start % ar7_mtd_info->erasesize);
-+			ar7_partinfo[p - 2].size -= ar7_mtd_info->erasesize - (rootfs_start % ar7_mtd_info->erasesize);
-+		}
-+	}
-+
-+	return p;
-+}
-+
-+static void __exit ar7_mtd_cleanup(void)
-+{
-+	if (ar7_mtd_info) {
-+		del_mtd_partitions(ar7_mtd_info);
-+		del_mtd_device(ar7_mtd_info);
-+		map_destroy(ar7_mtd_info);
-+	}
-+
-+	if (ar7_map.map_priv_1) {
-+		iounmap((void *)ar7_map.map_priv_1);
-+		ar7_map.map_priv_1 = 0;
-+	}
-+}
-+
-+module_init(ar7_mtd_init);
-+module_exit(ar7_mtd_cleanup);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Felix Fietkau");
-+MODULE_DESCRIPTION("AR7 CFI map driver");
-diff -urN linux.old/drivers/mtd/maps/Config.in linux.dev/drivers/mtd/maps/Config.in
---- linux.old/drivers/mtd/maps/Config.in	2005-07-21 05:36:32.414242296 +0200
-+++ linux.dev/drivers/mtd/maps/Config.in	2005-07-21 06:29:04.067118232 +0200
-@@ -48,6 +48,21 @@
- fi
- 
- if [ "$CONFIG_MIPS" = "y" ]; then
-+    if [ "$CONFIG_AR7" = "y" ]; then
-+      dep_tristate '  Flash chip mapping on Texas Instruments AR7' CONFIG_MTD_AR7 $CONFIG_MTD_CFI $CONFIG_MTD_PARTITIONS
-+      dep_bool     '    Use defaults for Texas Instruments AR7' CONFIG_MTD_AR7_DEFAULTS $CONFIG_MTD_AR7
-+      if [ "$CONFIG_MTD_AR7" = "y" -o "$CONFIG_MTD_AR7" = "m" ]; then
-+         if [ "$CONFIG_MTD_AR7_DEFAULTS" = "y" ]; then
-+            define_hex CONFIG_MTD_AR7_START 0x10000000
-+            define_hex CONFIG_MTD_AR7_LEN 0x400000
-+            define_int CONFIG_MTD_AR7_BUSWIDTH 2
-+         else
-+            hex '      Physical start address of flash mapping' CONFIG_MTD_AR7_START 0x10000000
-+            hex '      Physical length of flash mapping' CONFIG_MTD_AR7_LEN 0x400000
-+            int '      Bus width in octets' CONFIG_MTD_AR7_BUSWIDTH 2
-+         fi
-+      fi
-+   fi
-    dep_tristate '  Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
-    dep_tristate '  Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
-    dep_tristate '  Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100
-diff -urN linux.old/drivers/mtd/maps/Makefile linux.dev/drivers/mtd/maps/Makefile
---- linux.old/drivers/mtd/maps/Makefile	2005-07-21 05:36:32.414242296 +0200
-+++ linux.dev/drivers/mtd/maps/Makefile	2005-07-21 06:56:33.265401984 +0200
-@@ -10,6 +10,7 @@
- endif
- 
- # Chip mappings
-+obj-$(CONFIG_MTD_AR7)		+= ar7-flash.o
- obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
- obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
- obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
diff --git a/openwrt/target/linux/ar7-2.4/patches/002-led_driver.patch b/openwrt/target/linux/ar7-2.4/patches/002-led_driver.patch
deleted file mode 100644
index 81fe153cc3..0000000000
--- a/openwrt/target/linux/ar7-2.4/patches/002-led_driver.patch
+++ /dev/null
@@ -1,1915 +0,0 @@
-diff -urN linux.dev/drivers/char/Config.in linux.dev2/drivers/char/Config.in
---- linux.dev/drivers/char/Config.in	2005-10-21 17:02:20.199991500 +0200
-+++ linux.dev2/drivers/char/Config.in	2005-10-21 18:03:44.541778750 +0200
-@@ -133,6 +133,10 @@
-       fi
-    fi
- fi
-+if [ "$CONFIG_AR7" = "y" ]; then
-+   bool  'Enable LED support' CONFIG_AR7_LED
-+fi
-+
- if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then
-    tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
- fi
-diff -urN linux.dev/drivers/char/Makefile linux.dev2/drivers/char/Makefile
---- linux.dev/drivers/char/Makefile	2005-10-21 17:02:20.199991500 +0200
-+++ linux.dev2/drivers/char/Makefile	2005-10-21 18:03:44.541778750 +0200
-@@ -190,6 +190,12 @@
-   obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP)
- endif
- 
-+#
-+# Texas Intruments LED driver
-+# 
-+obj-$(CONFIG_AR7_LED) += avalanche_led/avalanche_led.o
-+subdir-$(CONFIG_AR7_LED) += avalanche_led
-+
- obj-$(CONFIG_HIL) += hp_keyb.o
- obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
- obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
-diff -urN linux.dev/drivers/char/avalanche_led/Makefile linux.dev2/drivers/char/avalanche_led/Makefile
---- linux.dev/drivers/char/avalanche_led/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev2/drivers/char/avalanche_led/Makefile	2005-10-21 18:03:44.513777000 +0200
-@@ -0,0 +1,23 @@
-+# File: drivers/char/avalanche_led/Makefile
-+#
-+# Makefile for the Linux LED device driver.
-+#
-+
-+
-+O_TARGET := avalanche_led.o
-+obj-m := avalanche_led.o
-+list-multi      := avalanche_led.o
-+
-+EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7
-+
-+export-objs := ledmod.o leds.o
-+
-+avalanche_led-objs := ledmod.o gpio.o uartled.o leds.o
-+
-+include $(TOPDIR)/Rules.make
-+
-+avalanche_led.o:      $(avalanche_led-objs)
-+	$(LD) -r -o $@ $(avalanche_led-objs)
-+
-+clean:
-+	rm -f core *.o *.a *.s
-diff -urN linux.dev/drivers/char/avalanche_led/gpio.c linux.dev2/drivers/char/avalanche_led/gpio.c
---- linux.dev/drivers/char/avalanche_led/gpio.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev2/drivers/char/avalanche_led/gpio.c	2005-10-21 18:03:44.513777000 +0200
-@@ -0,0 +1,382 @@
-+#include <linux/kernel.h>
-+#include <asm/uaccess.h>
-+#include <linux/spinlock.h>
-+#include <linux/proc_fs.h>
-+#include <linux/fs.h>
-+#include <linux/timer.h>
-+#include <linux/module.h>
-+
-+#include <asm/ar7/tnetd73xx_err.h>
-+#include <asm/ar7/tnetd73xx_misc.h>
-+#include <asm/ar7/ledapp.h>
-+
-+#define TRUE 1
-+#define FALSE 0
-+
-+#if defined CONFIG_AR7WRD || defined CONFIG_AR7RD
-+
-+#define AR7_RESET_FILE "led_mod/ar7reset"
-+#define AR7_VERSION_FILE "led_mod/hardware_version"
-+#define AR7_RESET_GPIO 11
-+#define RESET_POLL_TIME 1
-+#define RESET_HOLD_TIME 4
-+#define NO_OF_LEDS	
-+
-+static struct proc_dir_entry *reset_file;
-+static int res_state = 0;
-+static int count;
-+static struct timer_list *pTimer = NULL;
-+static ssize_t proc_read_reset_fops(struct file *filp,
-+                                    char *buf,size_t count , loff_t *offp);
-+
-+static ssize_t proc_read_hwversion_fops(struct file *filp,
-+                                    char *buf,size_t count , loff_t *offp);
-+
-+struct file_operations reset_fops = {
-+                                     read: proc_read_reset_fops
-+                                   };
-+struct file_operations hardware_version_fops = {
-+                                     read: proc_read_hwversion_fops
-+                                   };
-+#endif
-+
-+static spinlock_t	device_lock;
-+led_reg_t temp[15];
-+
-+static void gpio_led_on( unsigned long param )
-+{
-+	unsigned int flags;
-+
-+	spin_lock_irqsave(&device_lock, flags);
-+
-+	tnetd73xx_gpio_out(param,FALSE);
-+	spin_unlock_irqrestore(&device_lock, flags);
-+}
-+
-+static void gpio_led_off ( unsigned long param )
-+{
-+	unsigned int flags = 0x00;
-+
-+ 	spin_lock_irqsave(&device_lock, flags);
-+
-+	tnetd73xx_gpio_out(param,TRUE);
-+	spin_unlock_irqrestore(&device_lock, flags);
-+}
-+
-+static void gpio_led_init( unsigned long param)
-+{
-+	tnetd73xx_gpio_ctrl(param,GPIO_PIN,GPIO_OUTPUT_PIN);
-+}
-+
-+static void board_gpio_reset(void)
-+{
-+	/* Initialize the link mask */
-+	device_lock = SPIN_LOCK_UNLOCKED;
-+	return;
-+}
-+
-+#if defined CONFIG_AR7WRD || defined CONFIG_AR7RD
-+
-+static ssize_t proc_read_hwversion_fops(struct file *filp, char *buf, 
-+					size_t count, loff_t *offp)
-+{
-+	char line[8];
-+  	int len = 0;
-+  	if( *offp != 0 )
-+  		return 0;
-+
-+	len = sprintf(line,  "%d%d.%d%d%d%d\n", tnetd73xx_gpio_in(20),
-+			tnetd73xx_gpio_in(21), tnetd73xx_gpio_in(22),
-+			tnetd73xx_gpio_in(23), tnetd73xx_gpio_in(24),
-+		        tnetd73xx_gpio_in(25));
-+  	
-+	copy_to_user(buf, line, len);
-+	*offp = len;
-+	return len;
-+}	
-+
-+static ssize_t proc_read_reset_fops(struct file *filp,
-+                                 char *buf,size_t count , loff_t *offp)
-+{
-+  char * pdata = NULL;
-+  char line[3];
-+  int len = 0;
-+  if( *offp != 0 )
-+  	return 0;
-+
-+  pdata = buf;
-+	len = sprintf(line,"%d\n", res_state );
-+//wwzh
-+//  res_state = 0;
-+  copy_to_user(buf,line,len );
-+	*offp = len;
-+	return len;
-+}
-+
-+static void reset_timer_func(unsigned long data)
-+{
-+//wwzh
-+#if 0
-+  	count = (tnetd73xx_gpio_in(AR7_RESET_GPIO) == 0) ? count + 1: 0;
-+        if( count >= RESET_HOLD_TIME/RESET_POLL_TIME )
-+#endif
-+	if (tnetd73xx_gpio_in(AR7_RESET_GPIO) == 0)
-+    		res_state = 1;
-+	else
-+		res_state = 0;
-+	pTimer->expires = jiffies + HZ*RESET_POLL_TIME;
-+	add_timer (pTimer);
-+  return;
-+}
-+
-+static void hardware_version_init(void)
-+{
-+   	static struct proc_dir_entry *hardware_version_file;
-+  	hardware_version_file = create_proc_entry(AR7_VERSION_FILE, 0777, NULL);
-+  	if(hardware_version_file == NULL)
-+   		 return;
-+  	
-+	hardware_version_file->owner = THIS_MODULE;
-+  	hardware_version_file->proc_fops = &hardware_version_fops;
-+
-+  	tnetd73xx_gpio_ctrl(20,GPIO_PIN,GPIO_INPUT_PIN);
-+  	tnetd73xx_gpio_ctrl(21,GPIO_PIN,GPIO_INPUT_PIN);
-+  	tnetd73xx_gpio_ctrl(22,GPIO_PIN,GPIO_INPUT_PIN);
-+  	tnetd73xx_gpio_ctrl(23,GPIO_PIN,GPIO_INPUT_PIN);
-+  	tnetd73xx_gpio_ctrl(24,GPIO_PIN,GPIO_INPUT_PIN);
-+  	tnetd73xx_gpio_ctrl(25,GPIO_PIN,GPIO_INPUT_PIN);
-+	
-+	return;
-+}
-+
-+static void reset_init(void)
-+{
-+  /* Create board reset proc file */
-+  reset_file = create_proc_entry( AR7_RESET_FILE, 0777, NULL);
-+  if( reset_file == NULL)
-+    goto reset_file;
-+  reset_file->owner = THIS_MODULE;
-+  reset_file->proc_fops = &reset_fops;
-+
-+  /* Initialise GPIO 11 for input */
-+  tnetd73xx_gpio_ctrl(AR7_RESET_GPIO,GPIO_PIN,GPIO_INPUT_PIN);
-+
-+  /* Create a timer which fires every seconds */
-+  pTimer = kmalloc(sizeof(struct timer_list),GFP_KERNEL);
-+	init_timer( pTimer );
-+	pTimer->function = reset_timer_func;
-+	pTimer->data = 0;
-+  /* Start the timer */
-+  reset_timer_func(0);
-+  return ;
-+
-+  reset_file:
-+    remove_proc_entry("AR7_RESET_FILE",NULL);
-+	return;
-+}
-+#endif
-+/*************wwzh****************/
-+#if 1
-+extern unsigned int sys_mod_state;
-+extern unsigned int  wan_mod_state;
-+extern unsigned int wlan_mod_state;
-+void sys_led_init(void)
-+{
-+	tnetd73xx_gpio_ctrl(4, GPIO_PIN, GPIO_OUTPUT_PIN);
-+	tnetd73xx_gpio_ctrl(5, GPIO_PIN, GPIO_OUTPUT_PIN);
-+	tnetd73xx_gpio_ctrl(8, GPIO_PIN, GPIO_OUTPUT_PIN);
-+
-+	tnetd73xx_gpio_out(4, FALSE);
-+	tnetd73xx_gpio_out(5, TRUE);
-+	tnetd73xx_gpio_out(8, TRUE);
-+	
-+
-+	sys_mod_state = 2;
-+
-+}
-+void wan_led_init(void)
-+{
-+	
-+	tnetd73xx_gpio_ctrl(2, GPIO_PIN, GPIO_OUTPUT_PIN);
-+	tnetd73xx_gpio_ctrl(3, GPIO_PIN, GPIO_OUTPUT_PIN);
-+	
-+	tnetd73xx_gpio_out(2, FALSE);
-+	tnetd73xx_gpio_out(3, FALSE);
-+
-+	wan_mod_state = 1;
-+}
-+//wwzh wireless
-+#if 0
-+void wlan_led_init(void)
-+{
-+	//unsigned long i = 0;	
-+	tnetd73xx_gpio_ctrl(12, GPIO_PIN, GPIO_OUTPUT_PIN);
-+	tnetd73xx_gpio_ctrl(13, GPIO_PIN, GPIO_OUTPUT_PIN);
-+	
-+	tnetd73xx_gpio_out(12, FALSE);
-+	tnetd73xx_gpio_out(13, TRUE);
-+	//for (i = 0; i < 0x20000000; i++);
-+	wlan_mod_state = 1;
-+}
-+#endif
-+
-+#endif
-+/*************end ****************/
-+
-+void board_gpio_init(void)
-+{
-+
-+	board_gpio_reset();
-+/**************wwzh*************/
-+	sys_led_init();
-+	wan_led_init();
-+
-+	//junzhao 2004.3.15
-+	hardware_version_init();
-+	
-+	//wlan_led_init();
-+
-+  	/* Register Device MAX_LED_ID + 1 for reset to factory default */
-+	 temp[0].param = 0;
-+ 	 temp[0].init = reset_init;
-+  	 temp[0].onfunc = 0;
-+ 	 temp[0].offfunc = 0;
-+	 register_led_drv( MAX_LED_ID + 1 , &temp[0]);
-+//wwzh for wireless led  
-+#if 1
-+  /* Register led 12 WiFi 6 */
-+  temp[1].param = 6;
-+  temp[1].init = gpio_led_init;
-+  temp[1].onfunc = gpio_led_on;
-+  temp[1].offfunc = gpio_led_off;
-+  register_led_drv( 12 , &temp[1]);
-+
-+#endif
-+
-+#if 0
-+/**************end ************/
-+#if defined(CONFIG_AR5D01)
-+  /* Register led 1 GPIO0 */
-+  temp[0].param = GPIO_0;
-+  temp[0].init = gpio_led_init;
-+  temp[0].onfunc = gpio_led_on;
-+  temp[0].offfunc = gpio_led_off;
-+	register_led_drv( 1 , &temp[0]);
-+
-+  /* Register led 2 EINT1 */
-+  temp[1].param = EINT_1;
-+  temp[1].init = gpio_led_init;
-+  temp[1].onfunc = gpio_led_on;
-+  temp[1].offfunc = gpio_led_off;
-+	register_led_drv( 2 , &temp[1]);
-+
-+  /* Register led 5 EINT1 */
-+  temp[2].param = GPIO_1;
-+  temp[2].init = gpio_led_init;
-+  temp[2].onfunc = gpio_led_on;
-+  temp[2].offfunc = gpio_led_off;
-+	register_led_drv( 5 , &temp[2]);
-+#endif
-+
-+#if defined(CONFIG_AR5W01)
-+  /* Register led 5 GPIO_1 */
-+  temp[0].param = GPIO_1;
-+  temp[0].init = gpio_led_init;
-+  temp[0].onfunc = gpio_led_on;
-+  temp[0].offfunc = gpio_led_off;
-+	register_led_drv( 5 , &temp[0]);
-+
-+  /* Register led 7 GPIO_0 */
-+  temp[1].param = GPIO_0;
-+  temp[1].init = gpio_led_init;
-+  temp[1].onfunc = gpio_led_on;
-+  temp[1].offfunc = gpio_led_off;
-+	register_led_drv( 7 , &temp[1]);
-+#endif
-+
-+//wwzh #if defined(CONFIG_AR7RD)
-+#if defined CONFIG_AR7WRD || defined CONFIG_AR7RD
-+  /* Register led 5 Green PPPOE GPIO 13 */
-+  temp[0].param = 13;
-+  temp[0].init = gpio_led_init;
-+  temp[0].onfunc = gpio_led_on;
-+  temp[0].offfunc = gpio_led_off;
-+	register_led_drv( 5 , &temp[0]);
-+
-+  /* Register led 7 Green USB GPIO 12 */
-+  temp[1].param = 12;
-+  temp[1].init = gpio_led_init;
-+  temp[1].onfunc = gpio_led_on;
-+  temp[1].offfunc = gpio_led_off;
-+	register_led_drv( 7 , &temp[1]);
-+
-+  /* Register Device MAX_LED_ID + 1 for reset to factory default */
-+  temp[2].param = 0;
-+  temp[2].init = reset_init;
-+  temp[2].onfunc = 0;
-+  temp[2].offfunc = 0;
-+	register_led_drv( MAX_LED_ID + 1 , &temp[2]);
-+
-+  /* Register led 8 RED DSL GPIO 10 */
-+  temp[3].param = 10;
-+  temp[3].init = gpio_led_init;
-+  temp[3].onfunc = gpio_led_on;
-+  temp[3].offfunc = gpio_led_off;
-+	register_led_drv( 8 , &temp[3]);
-+
-+  /* Register led 9 RED PPPoE down GPIO 9 */
-+  temp[4].param = 9;
-+  temp[4].init = gpio_led_init;
-+  temp[4].onfunc = gpio_led_on;
-+  temp[4].offfunc = gpio_led_off;
-+	register_led_drv( 9 , &temp[4]);
-+
-+  /* Register led 10 DSL down GPIO 8 */
-+  temp[5].param = 8;
-+  temp[5].init = gpio_led_init;
-+  temp[5].onfunc = gpio_led_on;
-+  temp[5].offfunc = gpio_led_off;
-+	register_led_drv( 10 , &temp[5]);
-+
-+  /* Register led 11 Power GPIO 7 */
-+  temp[6].param = 7;
-+  temp[6].init = gpio_led_init;
-+  temp[6].onfunc = gpio_led_on;
-+  temp[6].offfunc = gpio_led_off;
-+	register_led_drv( 11 , &temp[6]);
-+
-+  /* Register led 12 WiFi 6 */
-+  temp[7].param = 6;
-+  temp[7].init = gpio_led_init;
-+  temp[7].onfunc = gpio_led_on;
-+  temp[7].offfunc = gpio_led_off;
-+	register_led_drv( 12 , &temp[7]);
-+
-+  /* Register led 13 ELINK(AA1313) GPIO 15 */
-+  temp[8].param = 15;
-+  temp[8].init = gpio_led_init;
-+  temp[8].onfunc = gpio_led_on;
-+  temp[8].offfunc = gpio_led_off;
-+	register_led_drv( 13 , &temp[8]);
-+
-+  /* Register led 14 EACT(Y13) GPIO 16 */
-+  temp[9].param = 16;
-+  temp[9].init = gpio_led_init;
-+  temp[9].onfunc = gpio_led_on;
-+  temp[9].offfunc = gpio_led_off;
-+	register_led_drv( 14 , &temp[9]);
-+
-+#endif
-+/**************wwzh**************/
-+#endif
-+/**************end **************/
-+  return;
-+}
-+
-+
-+
-+
-+
-+
-+
-+
-diff -urN linux.dev/drivers/char/avalanche_led/ledmod.c linux.dev2/drivers/char/avalanche_led/ledmod.c
---- linux.dev/drivers/char/avalanche_led/ledmod.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev2/drivers/char/avalanche_led/ledmod.c	2005-10-21 18:03:44.513777000 +0200
-@@ -0,0 +1,1116 @@
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/proc_fs.h>
-+#include <asm/uaccess.h>
-+#include <linux/fs.h>
-+#include <linux/timer.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+#include <asm/ar7/avalanche_regs.h>
-+#include <asm/ar7/ledapp.h>
-+#include <linux/module.h>
-+
-+#define LED_ON  		1
-+#define LED_OFF 		2
-+#define LED_BLINK   3
-+#define LED_FLASH		4
-+
-+#define LED_BLINK_UP   		5
-+#define LED_BLINK_DOWN   	6
-+
-+extern void avalanche_leds_init(void);
-+
-+/***********wwzh**************/
-+unsigned int sys_mod_state;
-+unsigned int wan_mod_state;
-+unsigned int wlan_mod_state;
-+
-+struct timer_list *pWanTimer = NULL;
-+struct timer_list *pWlanTimer = NULL;
-+/***********end **************/
-+
-+typedef struct state_entry{
-+  unsigned char mode;
-+  unsigned char led;
-+	void (*handler)(struct state_entry *pState);
-+  unsigned long param;
-+}state_entry_t;
-+
-+typedef struct mod_entry{
-+  state_entry_t *states[MAX_STATE_ID];
-+}mod_entry_t;
-+
-+static mod_entry_t *modArr[MAX_MOD_ID];
-+static struct proc_dir_entry *led_proc_dir,*led_file;
-+
-+/* index of the array is the led number HARDWARE SPECIFIC*/
-+typedef struct led_data{
-+	led_reg_t *led;
-+  int				state;
-+	struct timer_list *pTimer;
-+	unsigned char timer_running;
-+  unsigned long param;
-+}led_data_t;
-+
-+led_data_t led_arr[MAX_LED_ID + 1];
-+/*!!! The last device is actually being used for ar7 reset to factory default */
-+
-+
-+static spinlock_t	config_lock;
-+
-+static void board_led_link_up( state_entry_t *pState );
-+static void board_led_link_down( state_entry_t *pState );
-+static void board_led_activity_on( state_entry_t *pState );
-+static void board_led_activity_off( state_entry_t *pState );
-+static void led_timer_func(unsigned long data);
-+
-+extern void board_gpio_init(void);
-+extern void uart_led_init(void);
-+
-+static ssize_t proc_read_led_fops(struct file *filp,
-+                                 char *buf,size_t count , loff_t *offp);
-+static ssize_t proc_write_led_fops(struct file *filp,const char *buffer,
-+                                                      size_t count , loff_t *offp);
-+static int config_led( unsigned long y);
-+
-+struct file_operations led_fops = {
-+                                     read: proc_read_led_fops,
-+                                     write: proc_write_led_fops,
-+                                   };
-+
-+static int led_atoi( char *name)
-+{
-+	int val = 0;
-+  for(;;name++)
-+	{
-+		switch(*name)
-+		{
-+			case '0'...'9':
-+				val = val*10+(*name - '0');
-+				break;
-+			default:
-+				return val;
-+		}
-+	}
-+}
-+
-+static int free_memory(void)
-+{
-+  int i, j;
-+
-+  for( i = 0; i < MAX_MOD_ID ; i++)
-+	{
-+		if( modArr[i] != NULL )
-+		{
-+			for( j = 0; j < MAX_STATE_ID ; j++ )
-+			{
-+				if( modArr[i]->states[j] != NULL )
-+					kfree( modArr[i]->states[j]);
-+			}
-+			kfree(modArr[i]);
-+      modArr[i] = NULL;
-+		}
-+	}
-+  return 0;
-+}
-+
-+static int led_on( state_entry_t *pState )
-+{
-+	if( led_arr[pState->led].led == NULL)
-+		return -1;
-+  led_arr[pState->led].led->onfunc( led_arr[pState->led].led->param);
-+  return 0;
-+}
-+
-+static int led_off( state_entry_t *pState )
-+{
-+	if( led_arr[pState->led].led == NULL)
-+		return -1;
-+  led_arr[pState->led].led->offfunc( led_arr[pState->led].led->param);
-+  return 0;
-+}
-+
-+static void board_led_link_up( state_entry_t *pState )
-+{
-+  led_arr[pState->led].state = LED_ON;
-+  if( led_arr[pState->led].timer_running == 0 )
-+  	led_on(pState);
-+  return;
-+}
-+
-+static void board_led_link_down( state_entry_t *pState )
-+{
-+	led_arr[pState->led].state = LED_OFF;
-+  if( led_arr[pState->led].timer_running == 0 )
-+  	led_off(pState);
-+  return;
-+}
-+
-+static void add_led_timer(state_entry_t *pState)
-+{
-+	led_arr[pState->led].pTimer->expires = jiffies + HZ*(pState->param)/1000;
-+  led_arr[pState->led].param = pState->param;
-+  led_arr[pState->led].pTimer->data = pState;
-+	add_timer (led_arr[pState->led].pTimer);
-+}
-+
-+static void board_led_activity_on(state_entry_t *pState)
-+{
-+  if(led_arr[pState->led].timer_running == 0)
-+	{
-+		led_on(pState);
-+		add_led_timer(pState);
-+	  led_arr[pState->led].timer_running = 1;
-+	  led_arr[pState->led].state = LED_BLINK_UP;
-+	}
-+	else if( led_arr[pState->led].timer_running > 0xF0)
-+	{
-+	  led_arr[pState->led].state = LED_BLINK_UP;
-+		led_arr[pState->led].pTimer->expires = jiffies + HZ*(pState->param)/1000;
-+  	led_arr[pState->led].param = pState->param;
-+  	led_arr[pState->led].pTimer->data = pState;
-+	}
-+	return;
-+}
-+
-+static void board_led_activity_off(state_entry_t *pState)
-+{
-+  if(led_arr[pState->led].timer_running == 0)
-+	{
-+		led_off(pState);
-+		add_led_timer(pState);
-+	  led_arr[pState->led].timer_running = 1;
-+	  led_arr[pState->led].state = LED_BLINK_UP;
-+	}
-+	else if( led_arr[pState->led].timer_running > 0xF0)
-+	{
-+	  led_arr[pState->led].state = LED_BLINK_UP;
-+		led_arr[pState->led].pTimer->expires = jiffies + HZ*(pState->param)/1000;
-+  	led_arr[pState->led].param = pState->param;
-+  	led_arr[pState->led].pTimer->data = pState;
-+	}
-+	return;
-+}
-+
-+static void board_led_link_flash(state_entry_t *pState)
-+{
-+  if(led_on(pState))
-+		return;
-+  if(led_arr[pState->led].timer_running == 0)
-+		add_led_timer(pState);
-+	else
-+    led_arr[pState->led].param = pState->param;
-+  led_arr[pState->led].timer_running = 0xFF;
-+	led_arr[pState->led].state = LED_FLASH;
-+	return;
-+}
-+
-+static void led_timer_func(unsigned long data)
-+{
-+	state_entry_t *pState = NULL;
-+  mod_entry_t *pMod = NULL;
-+	unsigned int flags;
-+
-+	spin_lock_irqsave(&config_lock, flags);
-+
-+  pState = (state_entry_t *)data;
-+
-+  if( led_arr[pState->led].state == LED_BLINK_DOWN )
-+	{
-+		led_arr[pState->led].timer_running = 0;
-+		if( pState->mode == 2 )
-+			led_arr[pState->led].state = LED_OFF;
-+		else
-+			led_arr[pState->led].state = LED_ON;
-+	}
-+  else if( led_arr[pState->led].state == LED_BLINK_UP )
-+	{
-+    led_arr[pState->led].pTimer->expires = jiffies + HZ*(led_arr[pState->led].param)/1000;
-+  	led_arr[pState->led].pTimer->data = pState;
-+		add_timer (led_arr[pState->led].pTimer);
-+		if( pState->mode == 2 )
-+		{
-+  		led_off(pState);
-+			led_arr[pState->led].state = LED_BLINK_DOWN;
-+		}
-+		else
-+		{
-+  		led_on(pState);
-+			led_arr[pState->led].state = LED_BLINK_DOWN;
-+		}
-+		led_arr[pState->led].timer_running = 1;
-+	}
-+  else if( led_arr[pState->led].state == LED_FLASH )
-+	{
-+    led_arr[pState->led].pTimer->expires = jiffies + HZ*(led_arr[pState->led].param)/1000;
-+  	led_arr[pState->led].pTimer->data = pState;
-+		add_timer (led_arr[pState->led].pTimer);
-+
-+		if( led_arr[pState->led].timer_running == 0xFF )
-+		{
-+  		led_off(pState);
-+			led_arr[pState->led].timer_running--;
-+		}
-+		else
-+		{
-+  		led_on(pState);
-+			led_arr[pState->led].timer_running++;
-+		}
-+		spin_unlock_irqrestore(&config_lock, flags);
-+    return;
-+	}
-+  else if(led_arr[pState->led].state == LED_OFF)
-+	{
-+  	led_off(pState);
-+    led_arr[pState->led].timer_running = 0;
-+	}
-+	else if( led_arr[pState->led].state == LED_ON )
-+	{
-+  	led_on(pState);
-+    led_arr[pState->led].timer_running = 0;
-+	}
-+	spin_unlock_irqrestore(&config_lock, flags);
-+  return;
-+}
-+/************wwzh*****************/
-+#if 0
-+/************end *****************/
-+static ssize_t proc_read_led_fops(struct file *filp,
-+                                 char *buf,size_t count , loff_t *offp)
-+{
-+  char * pdata = NULL;
-+  int i = 0, j = 0, len = 0, totallen = 0;
-+  char line[255];
-+
-+  if( *offp != 0 )
-+  	return 0;
-+
-+  pdata = buf;
-+  len += sprintf(line,"LEDS Registered for use are:");
-+  for( i = 0; i< MAX_LED_ID; i++)
-+		if( led_arr[i].led != NULL )
-+			len += sprintf(&line[len]," %d ", i );
-+  line[len++] = '\n';
-+
-+  copy_to_user(pdata, line,len );
-+  pdata += len;
-+  totallen += len;
-+  len = 0;
-+  len = sprintf(line,"USER MODULE INFORMATION:\n");
-+  copy_to_user(pdata, line,len );
-+  pdata += len;
-+  totallen += len;
-+  len = 0;
-+  for( i = 0; i< MAX_MOD_ID; i++)
-+	{
-+		if( modArr[i] != NULL )
-+		{
-+			len = sprintf(line,"  Module ID = %d \n" , i);
-+  		copy_to_user(pdata, line,len );
-+      pdata += len;
-+  		totallen += len;
-+  		len = 0;
-+ 			for( j = 0; j < MAX_STATE_ID; j++)
-+			{
-+				if( modArr[i]->states[j] != NULL)
-+				{
-+					len = sprintf(line ,
-+                		"    State = %d , Led = %d," , j , modArr[i]->states[j]->led);
-+  				copy_to_user(pdata, line,len );
-+          pdata += len;
-+  				totallen += len;
-+
-+  				len = 0;
-+          switch( modArr[i]->states[j]->mode )
-+					{
-+						case 1:
-+									len = sprintf(line ," Mode = OFF\n");
-+									break;
-+						case 2:
-+									len = sprintf(line ," Mode = BLINK_ON , On Time(ms) = %d\n" ,
-+                                       (unsigned int)modArr[i]->states[j]->param);
-+									break;
-+						case 3:
-+									len = sprintf(line ," Mode = BLINK_OFF , Off Time(ms) = %d\n" ,
-+                                       (unsigned int)modArr[i]->states[j]->param);
-+									break;
-+						case 4:
-+									len = sprintf(line ," Mode = ON \n");
-+									break;
-+						case 5:
-+									len = sprintf(line ," Mode = FLASH , Time Period(ms) = %d\n" ,
-+                                       (unsigned int)modArr[i]->states[j]->param);
-+									break;
-+						default:
-+							break;
-+
-+					}
-+  				copy_to_user(pdata, line,len );
-+          pdata += len;
-+  				totallen += len;
-+
-+  				len = 0;
-+				}
-+			}
-+		}
-+	}
-+  /* Return with configuration information for LEDs */
-+	*offp = totallen;
-+	return totallen;
-+}
-+static ssize_t proc_write_led_fops(struct file *filp,const char *buffer,
-+                                                      size_t count , loff_t *offp)
-+{
-+  char *pdata = NULL, *ptemp = NULL;
-+  char line[10],temp[10];
-+  int i = 0;
-+  int mod = 0xFFFF , state = 0xFFFF;
-+  int flag = 0;
-+
-+  /* Check if this write is for configuring stuff */
-+  if( *(int *)(buffer) == 0xFFEEDDCC )
-+	{
-+    printk("<1>proc write:Calling Configuration\n");
-+		config_led((unsigned long)(buffer + sizeof(int)) );
-+		return count;
-+	}
-+
-+  if( count >= 10)
-+	{
-+    printk("<1>proc write:Input too long,max length = %d\n",10);
-+    return count;
-+	}
-+  memset( temp, 0x00 , 10);
-+  memset( line, 0x00 , 10);
-+  copy_from_user(line,buffer,count);
-+  line[count] = 0x00;
-+  pdata = line;
-+  ptemp = temp;
-+  while( flag == 0)
-+  {
-+		if( i > 10 )
-+			break;
-+		if( ((*pdata) >= '0' ) && ((*pdata) <= '9') )
-+		{	
-+			*ptemp = *pdata ;
-+			ptemp++;
-+		}	
-+		else if( (*pdata) == ',' )
-+		{
-+      *ptemp = 0x00;
-+			flag = 1;
-+		}	
-+		pdata++;
-+		i++;
-+  };
-+	if( flag == 1)
-+  	mod = led_atoi( temp);
-+	else
-+		return count;
-+		
-+  ptemp = temp;
-+  *ptemp = 0x00;
-+  flag = 0;
-+  while( flag == 0)
-+  {
-+		if( i > 10 )
-+			break;
-+		if( ((*pdata) >= '0' ) && ((*pdata) <= '9') )
-+		{	
-+			*ptemp = *pdata ;
-+			ptemp++;
-+		}	
-+		else if( (*pdata) == 0x00 )
-+		{
-+      *ptemp = 0x00;
-+			flag = 1;
-+		}	
-+		pdata++;
-+    i++;
-+  };
-+	if( flag == 1)
-+  	state = led_atoi( temp);
-+	else
-+		return count;
-+  if( (mod == 0xFFFF) || (state == 0xFFFF))
-+		return count;
-+  else
-+    led_operation( mod , state );
-+  return count;
-+}
-+
-+/************wwzh*******************/
-+#else
-+
-+#define TRUE 1
-+#define FALSE 0
-+#define FLICK_TIME (HZ*100/1000)
-+static unsigned int wan_txrx_state = 0;
-+static unsigned int wlan_txrx_state = 0;
-+
-+void led_operation( int mod , int state)
-+{
-+
-+	unsigned int flags;
-+
-+	spin_lock_irqsave(&config_lock, flags);
-+
-+	if( (mod >= MAX_MOD_ID) || ( state >= MAX_STATE_ID) )
-+	{
-+	  spin_unlock_irqrestore(&config_lock, flags);
-+		return;
-+	}
-+ 	if ( modArr[mod] == NULL )
-+	{
-+	  spin_unlock_irqrestore(&config_lock, flags);
-+		return;
-+	}
-+	if( modArr[mod]->states[state] == NULL )
-+	{
-+	  spin_unlock_irqrestore(&config_lock, flags);
-+		return;
-+	}
-+  /* Call the function handler  */
-+  modArr[mod]->states[state]->handler(modArr[mod]->states[state]);
-+
-+	spin_unlock_irqrestore(&config_lock, flags);
-+}
-+
-+static void wan_led_func(unsigned long data)
-+{
-+	if (wan_txrx_state == 0)
-+	{
-+		tnetd73xx_gpio_out(2, TRUE);
-+		tnetd73xx_gpio_out(3, FALSE);
-+		wan_txrx_state = 1;
-+	}
-+	else
-+	{
-+		tnetd73xx_gpio_out(2, FALSE);
-+		tnetd73xx_gpio_out(3, FALSE);
-+		wan_txrx_state = 0;
-+	}
-+	pWanTimer->expires = jiffies + FLICK_TIME;
-+	add_timer(pWanTimer);
-+}
-+//wwzh for wireless
-+#if 0
-+static void wlan_led_func(unsigned long data)
-+{
-+	if (wlan_txrx_state == 0)
-+	{
-+		tnetd73xx_gpio_out(12, TRUE);
-+		tnetd73xx_gpio_out(13, FALSE);
-+		wlan_txrx_state = 1;
-+	}
-+	else
-+	{
-+		tnetd73xx_gpio_out(12, FALSE);
-+		tnetd73xx_gpio_out(13, FALSE);
-+		wlan_txrx_state = 0;
-+		
-+	}
-+	pWlanTimer->expires = jiffies + FLICK_TIME;
-+	add_timer(pWlanTimer);
-+}
-+#endif
-+
-+void led_active(int mod, int state)
-+{
-+	unsigned int flags = 0;
-+
-+//printk("mod = %d state = %d\n", mod, state);
-+	spin_lock_irqsave(&config_lock, flags);
-+	if ((mod >= 5) || (state >= 5))
-+	{
-+		spin_unlock_irqrestore(&config_lock, flags);
-+		return;
-+	}
-+	
-+	switch (mod)
-+	{
-+		case 2: /*system led */
-+			sys_mod_state = state;
-+			switch (state)
-+			{
-+				case 1:	
-+					break;
-+				case 2:  /*sys led flashing green */
-+					tnetd73xx_gpio_out(4, FALSE);
-+					tnetd73xx_gpio_out(5, TRUE);
-+					tnetd73xx_gpio_out(8, TRUE);
-+					break;
-+				case 3: /*sys led solid green */
-+					tnetd73xx_gpio_out(4, TRUE);
-+					tnetd73xx_gpio_out(5, TRUE);
-+					tnetd73xx_gpio_out(8, TRUE);
-+					
-+					break;
-+				case 4: /*sys fail red */
-+					tnetd73xx_gpio_out(4, TRUE);
-+					tnetd73xx_gpio_out(5, FALSE);
-+					tnetd73xx_gpio_out(8, FALSE);
-+					break;
-+				default:
-+					break;
-+			}
-+			break;
-+		case 3: /*wan led */
-+			wan_mod_state = state;
-+			switch (state)
-+			{
-+				case 1: /*no wan interface*/
-+					if (pWanTimer)
-+					{
-+						del_timer(pWanTimer);
-+						kfree(pWanTimer);
-+						pWanTimer = NULL;
-+					}
-+					tnetd73xx_gpio_out(2, FALSE);
-+					tnetd73xx_gpio_out(3, FALSE);
-+					break;
-+				case 2: /*wan connected */
-+					if (pWanTimer)
-+					{
-+						del_timer(pWanTimer);
-+						kfree(pWanTimer);
-+						pWanTimer = NULL;
-+					}
-+					tnetd73xx_gpio_out(2, TRUE);
-+					tnetd73xx_gpio_out(3, FALSE);
-+					break;
-+				case 3: /*rx/tx activity */
-+					if (pWanTimer != NULL)
-+						break;	
-+				
-+					pWanTimer = kmalloc(sizeof(struct timer_list), GFP_KERNEL);
-+					init_timer(pWanTimer);
-+					
-+					pWanTimer->function = wan_led_func;
-+					pWanTimer->data = 0;
-+					pWanTimer->expires = jiffies + FLICK_TIME;
-+					tnetd73xx_gpio_out(2, FALSE);
-+					tnetd73xx_gpio_out(3, FALSE);
-+					wan_txrx_state = 0;
-+					add_timer(pWanTimer);
-+
-+					break;
-+				case 4: /*no ipaddress */
-+					if (pWanTimer)
-+					{
-+						del_timer(pWanTimer);
-+						kfree(pWanTimer);
-+						pWanTimer = NULL;
-+					}
-+					tnetd73xx_gpio_out(2, FALSE);
-+					tnetd73xx_gpio_out(3, TRUE);
-+					break;
-+				default:
-+					if (pWanTimer)
-+					{	
-+						del_timer(pWanTimer);
-+						kfree(pWanTimer);
-+						pWanTimer = NULL;
-+					}
-+					break;
-+			}
-+			break;
-+	//wwzh for wireless 
-+	#if 0
-+		case 4: /*wlan led */
-+			wlan_mod_state = state;
-+			switch (state)
-+			{
-+				case 1: /* wlan off */
-+					if (pWlanTimer)
-+					{
-+						del_timer(pWlanTimer);
-+						kfree(pWlanTimer);
-+						pWlanTimer = NULL;
-+					}
-+					tnetd73xx_gpio_out(12, FALSE);
-+					tnetd73xx_gpio_out(13, FALSE);
-+					break;
-+				case 2: /* wlan ready */
-+					if (pWlanTimer)
-+					{
-+						del_timer(pWlanTimer);
-+						kfree(pWlanTimer);
-+						pWlanTimer = NULL;
-+					}
-+					tnetd73xx_gpio_out(12, TRUE);
-+					tnetd73xx_gpio_out(13, FALSE);
-+					break;
-+				case 3: /* wlan rx/tx activity */
-+					if (pWlanTimer != NULL)
-+						break;
-+					
-+					pWlanTimer = kmalloc(sizeof(struct timer_list), GFP_KERNEL);
-+					init_timer(pWlanTimer);
-+					
-+					pWlanTimer->function = wlan_led_func;
-+					pWlanTimer->data = 0;
-+					pWlanTimer->expires = jiffies + FLICK_TIME;
-+					tnetd73xx_gpio_out(12, FALSE);
-+					tnetd73xx_gpio_out(13, FALSE);
-+					wlan_txrx_state = 0;
-+					add_timer(pWlanTimer);
-+					
-+					break;
-+				default:
-+					if (pWlanTimer)
-+					{
-+						del_timer(pWlanTimer);
-+						kfree(pWlanTimer);
-+						pWlanTimer = NULL;
-+					}
-+					
-+					break;
-+			}
-+			break;
-+	#endif //for wireless
-+		default:
-+			break;
-+	}
-+	spin_unlock_irqrestore(&config_lock, flags);
-+}
-+static ssize_t proc_read_led_fops(struct file *filp,
-+                                 char *buf,size_t count , loff_t *offp)
-+{
-+	char *pdata = NULL;
-+	int i = 0, j = 0, len = 0, totallen = 0;
-+	char line[255];
-+	
-+	if (*offp != 0)
-+		return 0;
-+	pdata = buf;
-+	len = sprintf(line, "USER MODULE INFORMATION:\n");
-+	copy_to_user(pdata, line, len);
-+	pdata += len;
-+	totallen += len;
-+	len = 0;
-+	
-+	//*******add Module 1 , this Module is ADSL ********/
-+	for (i = 0; i < MAX_MOD_ID; i++)
-+	{
-+		if (modArr[i] != NULL)
-+		{
-+			len = sprintf(line, " Module ID = %d\n", i);
-+			copy_to_user(pdata, line, len);
-+			pdata += len;
-+			totallen += len;
-+			len = 0;
-+			for(j = 0; j < MAX_STATE_ID; j++)
-+			{
-+				if (modArr[i]->states[j] != NULL)
-+				{
-+					len = sprintf(line, "State =%d, Led = %d,", j, modArr[i]->states[j]->led);
-+					copy_to_user(pdata, line, len);
-+					pdata += len;
-+					totallen += len;
-+					len = 0;
-+					switch(modArr[i]->states[j]->mode)
-+					{
-+					  case 1:
-+				            len = sprintf(line, "Mode = OFF\n");
-+					    break;
-+					  case 2:
-+					    len = sprintf(line, "Mode = BLINK_ON, On Time(ms) = %d\n", (unsigned int)modArr[i]->states[j]->param);	
-+					    break;
-+					  case 3:
-+					    len = sprintf(line, "Mode = BLINK_OFF, Off Time(ms) = %d\n", (unsigned int)modArr[i]->states[j]->param);
-+					    break;
-+					  case 4:
-+					    len = sprintf(line, "Mode = On\n");
-+					    break;
-+					  case 5:
-+					    len = sprintf(line, "Mode = FLASH, Time Period(ms) = %d\n", (unsigned int)modArr[i]->states[j]->param);
-+					    break;
-+					  default:
-+					    break;		
-+					}
-+					copy_to_user(pdata, line, len);
-+					pdata += len;
-+					totallen += len;
-+					len = 0;
-+				}
-+			} 
-+		}
-+
-+	}
-+
-+	len = sprintf(line, "Module ID = 2(system led)\n");
-+	copy_to_user(pdata, line, len);
-+	pdata += len;
-+	totallen += len;
-+	len = 0;
-+	switch(sys_mod_state)
-+	{
-+		case 1:
-+			len = sprintf(line, "State = OFF\n");
-+			break;
-+		case 2:	
-+			len = sprintf(line, "State = Booting\n");
-+			break;
-+		case 3:
-+			len = sprintf(line, "State = System Ready\n");
-+			break;
-+		case 4:
-+			len = sprintf(line, "State = System Failure\n");
-+			break;
-+		default:
-+			break;
-+	}
-+	copy_to_user(pdata, line, len);
-+	pdata += len;
-+	totallen += len;
-+	len = 0;
-+	
-+	len = sprintf(line, "Module ID = 3(WAN led)\n");
-+	copy_to_user(pdata, line, len);
-+	pdata += len;
-+	totallen += len;
-+	len = 0;
-+	switch(wan_mod_state)
-+	{
-+		case 1:
-+			len = sprintf(line, "State = OFF\n");
-+			break;
-+		case 2:
-+			len = sprintf(line, "State = Wan Connected\n");
-+			break;
-+		case 3:
-+			len = sprintf(line, "State = Wan Tx/Rx Activity\n");
-+			break;
-+		case 4:
-+			len = sprintf(line, "State = Wan Connect Failure\n");
-+			break;
-+		default:
-+			break;
-+	}
-+	copy_to_user(pdata, line, len);
-+	pdata += len;
-+	totallen += len;
-+	len = 0;
-+
-+//wwzh for wireless
-+#if 0
-+	len = sprintf(line, "Module ID = 4(WLAN led)\n");
-+	copy_to_user(pdata, line, len);
-+	pdata += len;
-+	totallen += len;
-+	len = 0;
-+	switch(wlan_mod_state)
-+	{
-+		case 1:
-+			len = sprintf(line, "State = OFF\n");
-+			break;
-+		case 2:
-+			len = sprintf(line, "State = wlan Ready\n");
-+			break;
-+		case 3:
-+			len = sprintf(line, "State = wlan rx/tx activity\n");
-+			break;
-+		default:
-+			break; 
-+	}
-+	copy_to_user(pdata, line, len);
-+	pdata += len;
-+	totallen += len;
-+	len = 0;
-+#endif //for wireless
-+	
-+	*offp = totallen;
-+	return totallen;
-+}
-+static ssize_t proc_write_led_fops(struct file *filp,const char *buffer,
-+                                               size_t count , loff_t *offp)
-+{
-+	char *pdata = NULL, *ptemp = NULL;
-+	char line[10], temp[10];
-+	int i = 0;
-+	int mod = 0xffff, state = 0xffff;
-+	int flag = 0;
-+
-+ 	 /* Check if this write is for configuring ADSL */
-+  	if( *(int *)(buffer) == 0xFFEEDDCC )
-+	{
-+   		 printk("<1>proc write:Calling Configuration\n");
-+		 config_led((unsigned long)(buffer + sizeof(int)) );
-+		 return count;
-+	}
-+
-+	if (count > 10)
-+	{
-+		printk("<1> proc write: Input too long, max length = 10\n");
-+		return count;
-+	}
-+	memset(temp, 0x00, 10);
-+	memset(line, 0x00, 10);
-+	copy_from_user(line, buffer, count);
-+	line[count] = 0x00;
-+	pdata = line;
-+	ptemp = temp;	
-+	
-+	while (flag == 0)
-+	{
-+		if (i > 10)
-+			break;
-+		if (((*pdata) >= '0') && ((*pdata) <= '9'))
-+		{
-+			*ptemp = *pdata;
-+			ptemp++;
-+		}
-+		else if ((*pdata) == ',')
-+		{
-+			*ptemp = 0x00;
-+			flag = 1;
-+		}
-+		pdata++;
-+		i++;
-+	}
-+	if (flag == 1)
-+		mod = led_atoi(temp);
-+	else
-+		return count;
-+	
-+	ptemp = temp;
-+	*ptemp = 0x00;
-+	flag = 0;
-+	
-+	while(flag == 0)
-+	{
-+		if (i > 10)
-+			break;
-+		if (((*pdata) >= '0') && ((*pdata) <= '9'))
-+		{
-+			*ptemp = *pdata;
-+			ptemp++;
-+		}
-+		else if ((*pdata) == 0x00)
-+		{
-+			*ptemp = 0x00;
-+			flag = 1;
-+		}
-+		pdata++;
-+		i++;
-+	}
-+	if (flag == 1)
-+		state = led_atoi(temp);
-+	else
-+		return count;
-+	if ((mod == 0xFFFF) || (state == 0xFFFF))
-+		return count;
-+	else
-+	{
-+		if (mod != 4)
-+			led_active(mod, state);	
-+		else 
-+			led_operation(mod, state);
-+	} 
-+	return 1;
-+}
-+#endif
-+/************end *******************/
-+static int config_led(unsigned long y)
-+{
-+  config_elem_t *pcfg = NULL;
-+  char *pdata = NULL;
-+  int i;
-+  int length = 0 , number = 0;
-+	unsigned int flags;
-+
-+	spin_lock_irqsave(&config_lock, flags);
-+
-+    /* ioctl to configure */
-+    length =  *((int*)y);
-+    pdata = (char *)y + sizeof(int);
-+    number =  (length - sizeof(int))/sizeof(config_elem_t);
-+    pcfg = (config_elem_t *)(pdata);
-+
-+    /* Check if an earlier configuration exists IF yes free it up */
-+    free_memory();
-+
-+    for ( i = 0 ; i < number ; i++ )
-+    {
-+			/* If no structure has been allocated for the module do so */
-+      if ( modArr[pcfg->name] == NULL )
-+			{
-+					printk("<1>module =  %d\n",pcfg->name);
-+        if( pcfg->name >= MAX_MOD_ID)
-+				{
-+					printk("<1>Exiting Configuration: Module ID too large %d\n",pcfg->name);
-+					free_memory();
-+					spin_unlock_irqrestore(&config_lock, flags);
-+					return -1;
-+				}
-+        modArr[pcfg->name] = kmalloc(sizeof(mod_entry_t),GFP_KERNEL);
-+        if(modArr[pcfg->name] == NULL)
-+				{
-+					printk("<1>Exiting Configuration: Error in allocating memory\n");
-+					free_memory();
-+					spin_unlock_irqrestore(&config_lock, flags);
-+					return -1;
-+				}
-+				memset( modArr[pcfg->name], 0x00, sizeof(mod_entry_t));
-+			}
-+
-+      /* if no structure is allocated previously for this state
-+         allocate a structure, if it's already there fill it up */
-+			if( modArr[pcfg->name]->states[pcfg->state] == NULL)
-+			{
-+					printk("<1>STATE =  %d\n",pcfg->state);
-+				if( pcfg->state >= MAX_STATE_ID)
-+				{
-+					printk("<1>Exiting Configuration: State ID too large\n");
-+					free_memory();
-+					spin_unlock_irqrestore(&config_lock, flags);
-+					return -1;
-+				}
-+				modArr[pcfg->name]->states[pcfg->state] =
-+                        kmalloc(sizeof(state_entry_t),GFP_KERNEL);
-+				if( modArr[pcfg->name]->states[pcfg->state] == NULL)
-+				{
-+					free_memory();
-+					spin_unlock_irqrestore(&config_lock, flags);
-+					return -1;
-+				}
-+				memset( modArr[pcfg->name]->states[pcfg->state], 0x00, sizeof(state_entry_t));
-+			}
-+			/* Fill up the fields of the state */
-+      if( pcfg->led >= MAX_LED_ID)
-+			{
-+				printk("<1>led =  %d\n",pcfg->led);
-+				free_memory();
-+				spin_unlock_irqrestore(&config_lock, flags);
-+				return -1;
-+			}
-+      modArr[pcfg->name]->states[pcfg->state]->led = pcfg->led;
-+      modArr[pcfg->name]->states[pcfg->state]->mode = pcfg->mode;
-+      modArr[pcfg->name]->states[pcfg->state]->param = pcfg->param;
-+			switch(pcfg->mode)
-+			{
-+				case 1:
-+      		modArr[pcfg->name]->states[pcfg->state]->handler = board_led_link_down;
-+					break;
-+				case 2:
-+				case 3:
-+				case 5:
-+					if( pcfg->mode == 2 )
-+						modArr[pcfg->name]->states[pcfg->state]->handler = board_led_activity_on;
-+					else if( pcfg->mode == 3)
-+      			modArr[pcfg->name]->states[pcfg->state]->handler = board_led_activity_off;
-+					else
-+		        modArr[pcfg->name]->states[pcfg->state]->handler = board_led_link_flash;
-+					break;
-+				case 4:
-+      		modArr[pcfg->name]->states[pcfg->state]->handler = board_led_link_up;
-+					break;
-+				default:
-+				  printk("<1>Exiting Configuration: Unknown LED Mode\n");
-+					free_memory();
-+					spin_unlock_irqrestore(&config_lock, flags);
-+					return -1;
-+			}
-+			pcfg++;			
-+    }
-+	spin_unlock_irqrestore(&config_lock, flags);
-+  return 0;
-+}
-+
-+
-+int __init led_init(void)
-+{
-+
-+  /* Clear our memory */
-+  memset(modArr,0x00,sizeof(mod_entry_t *)*MAX_MOD_ID);
-+  memset(led_arr,0x00,sizeof(led_data_t *)*MAX_LED_ID);
-+
-+	/* Create spin lock for config data structure */
-+	config_lock=SPIN_LOCK_UNLOCKED;
-+
-+  /* Create directory */
-+  led_proc_dir = proc_mkdir("led", NULL);
-+  if( led_proc_dir == NULL )
-+    goto out;
-+
-+  /* Create adsl file */
-+  led_file = create_proc_entry("led", 0777, led_proc_dir);
-+  if( led_file == NULL)
-+    goto led_file;
-+  led_file->owner = THIS_MODULE;
-+  led_file->proc_fops = &led_fops;
-+
-+  memset( modArr , 0x00 , sizeof(mod_entry_t *) * MAX_MOD_ID);
-+	/* Reset the GPIO pins  */
-+  board_gpio_init();
-+
-+	/* Register the UART controlled LEDS  */
-+  uart_led_init();
-+  /* Create the usb proc file */
-+	avalanche_leds_init();
-+  return 0;
-+
-+  led_file:
-+    remove_proc_entry("led",led_proc_dir);
-+  out:
-+    return 0;
-+
-+}
-+
-+void led_exit()
-+{
-+	remove_proc_entry("led", led_proc_dir);
-+}
-+
-+module_init(led_init);
-+module_exit(led_exit);
-+
-+void register_led_drv( int device , led_reg_t *pInfo)
-+{
-+	unsigned int flags;
-+	struct timer_list *pTimer = NULL;
-+
-+	spin_lock_irqsave(&config_lock, flags);
-+
-+	led_arr[device].led = pInfo;
-+	if( led_arr[device].led->init != 0x00)
-+      led_arr[device].led->init(led_arr[device].led->param);
-+	if( led_arr[device].led->offfunc != 0x00)
-+      led_arr[device].led->offfunc(led_arr[device].led->param);
-+
-+	/* Create a timer for blinking   */
-+  pTimer = kmalloc(sizeof(struct timer_list),GFP_KERNEL);
-+	init_timer( pTimer );
-+	pTimer->function = led_timer_func;
-+	pTimer->data = 0;
-+  led_arr[device].pTimer = pTimer;
-+  led_arr[device].timer_running = 0;
-+
-+	spin_unlock_irqrestore(&config_lock, flags);
-+
-+  return;
-+}
-+
-+void deregister_led_drv( int device)
-+{
-+	unsigned int flags;
-+
-+	spin_lock_irqsave(&config_lock, flags);
-+	led_arr[device].led = NULL;
-+
-+	if( led_arr[device].pTimer != NULL)
-+	{
-+		del_timer(led_arr[device].pTimer);
-+		kfree(led_arr[device].pTimer);
-+	}
-+	spin_unlock_irqrestore(&config_lock, flags);
-+
-+  return;
-+}
-+
-+EXPORT_SYMBOL_NOVERS(led_operation);
-+EXPORT_SYMBOL_NOVERS(register_led_drv);
-+EXPORT_SYMBOL_NOVERS(deregister_led_drv);
-+
-diff -urN linux.dev/drivers/char/avalanche_led/leds.c linux.dev2/drivers/char/avalanche_led/leds.c
---- linux.dev/drivers/char/avalanche_led/leds.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev2/drivers/char/avalanche_led/leds.c	2005-10-21 18:03:44.513777000 +0200
-@@ -0,0 +1,133 @@
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <asm/ar7/avalanche_regs.h>
-+#include <linux/spinlock.h>
-+#include <linux/timer.h>
-+#include <linux/sched.h>
-+#include <linux/module.h>
-+#include <linux/proc_fs.h>
-+#include <asm/uaccess.h>
-+#include <linux/fs.h>
-+
-+#include <asm/ar7/ledapp.h>
-+
-+#if defined(CONFIG_AR5D01) || defined(CONFIG_AR5W01) || defined(CONFIG_AR7)
-+
-+#define ETH_MASK 0x01
-+#define USB_MASK 0x02
-+
-+static struct proc_dir_entry *usb_file;
-+static ssize_t proc_read_usb_fops(struct file *filp,
-+                                 char *buf,size_t count , loff_t *offp);
-+struct file_operations usb_fops = {read: proc_read_usb_fops};
-+
-+typedef struct mod_states{
-+  int module;
-+  int activity;
-+  int linkup;
-+  int idle;
-+}mod_states_t;
-+
-+mod_states_t state_arr[] = {
-+                          	{ MOD_ETH,DEF_ETH_ACTIVITY,DEF_ETH_LINK_UP,DEF_ETH_IDLE },
-+                          	{ MOD_USB,DEF_USB_ACTIVITY,DEF_USB_LINK_UP,DEF_USB_IDLE },
-+                          	{ MOD_LAN,DEF_LAN_ACTIVITY,DEF_LAN_LINK_UP,DEF_LAN_IDLE }
-+                        	};
-+
-+unsigned char	device_links = 0;	/* Bitmask with the devices that are up */
-+
-+
-+void avalanche_led_activity_pulse(unsigned long device)
-+{
-+	/* If device link is not up return */
-+  if( !(device_links & (unsigned char)(1 << device)))
-+		return;
-+#ifdef MULTIPLEX_LED
-+	led_operation( state_arr[2].module, state_arr[2].activity);
-+#else
-+	led_operation( state_arr[device].module, state_arr[device].activity);
-+#endif
-+}
-+
-+void avalanche_led_link_up( unsigned long device )
-+{
-+	
-+  /* If already UP ignore */
-+  if( device_links & (unsigned char)(1 << device))
-+		return;
-+  /* Turn on the bit for the device */
-+	device_links |= (unsigned char)(1 << device);
-+#ifdef MULTIPLEX_LED
-+	led_operation( state_arr[2].module, state_arr[2].linkup);
-+#else
-+	led_operation( state_arr[device].module, state_arr[device].linkup);
-+#endif
-+}
-+
-+void avalanche_led_link_down ( unsigned long device )
-+{
-+
-+  /* If already DOWN ignore */
-+  if( !(device_links & (unsigned char)(1 << device)))
-+		return;
-+
-+	/* Turn off the bit for the device */
-+	device_links &= ~(unsigned char)(1 << device);
-+#ifdef MULTIPLEX_LED
-+	/* If no links, then shut the LED off  */
-+	if(!device_links)
-+		led_operation( state_arr[2].module, state_arr[2].idle);
-+#else
-+	led_operation( state_arr[device].module, state_arr[device].idle);
-+#endif
-+}
-+
-+static ssize_t proc_read_usb_fops(struct file *filp,
-+                                 char *buf,size_t count , loff_t *offp)
-+{
-+  char * pdata = NULL;
-+  char line[3];
-+  if( *offp != 0 )
-+  	return 0;
-+  pdata = buf;
-+  if( device_links & USB_MASK)
-+  	sprintf(line,"%s\n","1");
-+  else
-+  	sprintf(line,"%s\n","0");
-+  copy_to_user(pdata,line,2);
-+	*offp = 2;
-+	return 2;
-+}
-+
-+
-+void avalanche_leds_init(void)
-+{
-+  /* Create usb link proc file */
-+  usb_file = create_proc_entry("avalanche/usb_link", 0444, NULL);
-+  if( usb_file == NULL)
-+    return;
-+  usb_file->owner = THIS_MODULE;
-+  usb_file->proc_fops = &usb_fops;
-+	return;
-+}
-+
-+EXPORT_SYMBOL(avalanche_led_activity_pulse);
-+EXPORT_SYMBOL(avalanche_led_link_up);
-+EXPORT_SYMBOL(avalanche_led_link_down);
-+
-+#else
-+/* We make a dummy init routine for the platforms that do not support this led
-+   API
-+*/
-+
-+void avalanche_leds_init(void)
-+{
-+}
-+
-+#endif
-+
-+
-+
-+
-+
-diff -urN linux.dev/drivers/char/avalanche_led/uartled.c linux.dev2/drivers/char/avalanche_led/uartled.c
---- linux.dev/drivers/char/avalanche_led/uartled.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev2/drivers/char/avalanche_led/uartled.c	2005-10-21 18:03:44.529778000 +0200
-@@ -0,0 +1,55 @@
-+#include <linux/kernel.h>
-+#include <asm/uaccess.h>
-+#include <linux/spinlock.h>
-+#include <asm/ar7/avalanche_regs.h>
-+#include <asm/ar7/ledapp.h>
-+
-+#define UART_LED_REG  (*(volatile unsigned int *)(UARTA_BASE + 0x10))
-+
-+static spinlock_t	device_lock;
-+led_reg_t temp1[2];
-+
-+static void uart_led_on(unsigned long param)
-+{
-+  unsigned long flags;
-+
-+  spin_lock_irqsave(&device_lock,flags);
-+  UART_LED_REG &= 0xFFFD;
-+  spin_unlock_irqrestore(&device_lock, flags);
-+}
-+
-+static void uart_led_off ( unsigned long param )
-+{
-+   unsigned int flags = 0x00;
-+   spin_lock_irqsave(&device_lock, flags);
-+   UART_LED_REG |= 0x02;
-+	spin_unlock_irqrestore(&device_lock, flags);
-+}
-+
-+void uart_led_init(void)
-+{
-+
-+#if defined(CONFIG_AR5D01)
-+  /* Register led 6 UART Pin 1 */
-+  temp1[0].param = 0;
-+  temp1[0].init = NULL;
-+  temp1[0].onfunc = uart_led_on;
-+  temp1[0].offfunc = uart_led_off;
-+	register_led_drv( 6 , &temp1[0]);
-+#endif
-+
-+#if defined(CONFIG_AR5W01)
-+  /* Register led 8 UART Pin 1 */
-+  temp1[0].param = 0;
-+  temp1[0].init = NULL;
-+  temp1[0].onfunc = uart_led_on;
-+  temp1[0].offfunc = uart_led_off;
-+	register_led_drv( 8 , &temp1[0]);
-+#endif
-+
-+	/* Initialize the link mask */
-+	device_lock = SPIN_LOCK_UNLOCKED;
-+
-+  return;
-+}
-+
-diff -urN linux.dev/include/asm-mips/ar7/led_config.h linux.dev2/include/asm-mips/ar7/led_config.h
---- linux.dev/include/asm-mips/ar7/led_config.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev2/include/asm-mips/ar7/led_config.h	2005-10-21 17:02:25.568327000 +0200
-@@ -0,0 +1,55 @@
-+/******************************************************************************    
-+ * FILE PURPOSE:     - LED config Header                                       
-+ ******************************************************************************    
-+ * FILE NAME:     led_config.h                                                        
-+ *                                                                                 
-+ * DESCRIPTION:  Header file for LED configuration parameters
-+ *               and data structures                                                 
-+ *                                                                                 
-+ * REVISION HISTORY:                                                               
-+ * 11 Oct 03 - PSP TII                                                             
-+ *                                                                                 
-+ * (C) Copyright 2002, Texas Instruments, Inc                                      
-+ *******************************************************************************/  
-+                                                                                   
-+
-+#ifndef __LED_CONFIG__
-+#define __LED_CONFIG__
-+
-+/* LED config parameters */
-+#define  MAX_GPIO_PIN_NUM           64
-+#define  MAX_GPIOS_PER_STATE         5
-+#define  MAX_MODULE_ENTRIES         25
-+#define  MAX_MODULE_INSTANCES        4
-+#define  MAX_STATE_ENTRIES          25
-+#define  MAX_LED_ENTRIES            25
-+
-+
-+/* LED modes */
-+#define LED_OFF                    0
-+#define LED_ON                     1
-+#define LED_ONESHOT_OFF            2
-+#define LED_ONESHOT_ON             3
-+#define LED_FLASH                  4
-+#define LED_BLINK_CODE0            5    /*--- param1: on time, param2: blink nr , (param2 > 100 blink off) ---*/
-+#define LED_BLINK_CODE1            6 
-+#define LED_BLINK_CODE2            7 
-+
-+#define NUM_LED_MODES              8
-+
-+
-+
-+/* Data structure for LED configuration */
-+typedef struct led_config{
-+    unsigned char name[80];
-+    unsigned int instance;
-+    unsigned int state;
-+    unsigned int gpio[MAX_GPIOS_PER_STATE];
-+    unsigned int mode[MAX_GPIOS_PER_STATE];
-+    unsigned int gpio_num;
-+    unsigned int param1;
-+    unsigned int param2;
-+}LED_CONFIG_T;
-+
-+
-+#endif /* __LED_CONFIG__ */
-diff -urN linux.dev/include/asm-mips/ar7/led_hal.h linux.dev2/include/asm-mips/ar7/led_hal.h
---- linux.dev/include/asm-mips/ar7/led_hal.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev2/include/asm-mips/ar7/led_hal.h	2005-10-21 17:02:25.568327000 +0200
-@@ -0,0 +1,30 @@
-+/******************************************************************************
-+ * FILE PURPOSE:     - LED HAL module Header
-+ ******************************************************************************
-+ * FILE NAME:     led_hal.h
-+ *
-+ * DESCRIPTION:    LED HAL API's.
-+ *
-+ * REVISION HISTORY:
-+ * 11 Oct 03 - PSP TII
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+#ifndef __LED_HAL__
-+#define __LED_HAL__
-+
-+/* Interface prototypes */
-+#include "led_config.h"
-+
-+int avalanche_led_hal_init (int *gpio_off_value, int num_gpio_pins);
-+int avalanche_led_config_set (LED_CONFIG_T * led_cfg);
-+int avalanche_led_config_get (LED_CONFIG_T *led_cfg,int module_id,int instance, int state);
-+void *avalanche_led_register (const char *module_name, int instance_num);
-+void  avalanche_led_action (void *handle, int state_id);
-+void avalanche_led_late_actions(void);
-+int avalanche_led_unregister (void *handle);
-+void avalanche_led_free_all(void);
-+void avalanche_led_hal_exit (void);
-+
-+#endif /*__LED_HAL__ */
-diff -urN linux.dev/include/asm-mips/ar7/ledapp.h linux.dev2/include/asm-mips/ar7/ledapp.h
---- linux.dev/include/asm-mips/ar7/ledapp.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev2/include/asm-mips/ar7/ledapp.h	2005-10-21 18:03:44.573780750 +0200
-@@ -0,0 +1,59 @@
-+#ifndef __LED_APP__
-+#define __LED_APP__
-+
-+#define CONF_FILE		"/etc/led.conf"
-+#define LED_PROC_FILE		"/proc/led_mod/led"
-+
-+#define CONFIG_LED_MODULE
-+
-+#define MAX_MOD_ID        25
-+#define MAX_STATE_ID   	  25
-+#define MAX_LED_ID 	  25
-+
-+#define MOD_ADSL 1
-+#define DEF_ADSL_IDLE     1
-+#define DEF_ADSL_TRAINING 2
-+#define DEF_ADSL_SYNC     3
-+#define DEF_ADSL_ACTIVITY 4
-+
-+#define MOD_WAN  2
-+#define DEF_WAN_IDLE      1
-+#define DEF_WAN_NEGOTIATE 2
-+#define DEF_WAN_SESSION   3
-+
-+#define MOD_LAN  3
-+#define DEF_LAN_IDLE		  1
-+#define DEF_LAN_LINK_UP   2
-+#define DEF_LAN_ACTIVITY  3
-+
-+#define MOD_WLAN 4
-+#define DEF_WLAN_IDLE     1
-+#define DEF_WLAN_LINK_UP  2
-+#define DEF_WLAN_ACTIVITY 3
-+
-+#define MOD_USB  5
-+#define DEF_USB_IDLE		  1
-+#define DEF_USB_LINK_UP   2
-+#define DEF_USB_ACTIVITY  3
-+
-+#define MOD_ETH  6
-+#define DEF_ETH_IDLE		  1
-+#define DEF_ETH_LINK_UP   2
-+#define DEF_ETH_ACTIVITY  3
-+
-+typedef struct config_elem{
-+  unsigned char name;
-+  unsigned char state;
-+  unsigned char mode;
-+  unsigned char led;
-+            int param;
-+}config_elem_t;
-+
-+typedef struct led_reg{
-+	unsigned int param;
-+  void (*init)(unsigned long param);
-+  void (*onfunc)(unsigned long param);
-+  void (*offfunc)(unsigned long param);
-+}led_reg_t;
-+
-+#endif
diff --git a/openwrt/target/linux/ar7-2.4/patches/003-net_driver_cpmac.patch b/openwrt/target/linux/ar7-2.4/patches/003-net_driver_cpmac.patch
deleted file mode 100644
index 42b64584da..0000000000
--- a/openwrt/target/linux/ar7-2.4/patches/003-net_driver_cpmac.patch
+++ /dev/null
@@ -1,13341 +0,0 @@
-diff -urN linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.c linux.dev/drivers/net/avalanche_cpmac/cpcommon_cpmac.c
---- linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cpcommon_cpmac.c	2005-07-12 02:48:41.996601000 +0200
-@@ -0,0 +1,728 @@
-+#ifndef _INC_CPCOMMON_C
-+#define _INC_CPCOMMON_C
-+
-+#ifdef _CPHAL_CPMAC
-+#include "cpremap_cpmac.c"
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+#include "cpremap_cpaal5.c"
-+#endif
-+
-+#ifdef _CPHAL_CPSAR
-+#include "cpremap_cpsar.c"
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+#include "cpremap_cpaal2.c"
-+#endif
-+
-+/**
-+@defgroup Common_Config_Params Common Configuration Parameters
-+
-+This section documents the configuration parameters that are valid across
-+all CPHAL devices.
-+@{
-+*/
-+/** This is the debug level.  The field is bit defined, such that the user
-+should set to 1 all the bits corresponding to desired debug outputs.  The following 
-+are the meanings for each debug bit:
-+- bit0 (LSB): CPHAL Function Trace
-+- b1 : OS Function call trace
-+- b2 : Critical section entry/exit
-+- b3 : Memory allocation/destruction
-+- b4 : Detailed information in Rx path
-+- b5 : Detailed information in Tx path
-+- b6 : Extended error information
-+- b7 : General info
-+*/
-+static const char pszDebug[]        = "debug";
-+/** CPU Frequency. */
-+/*static const char pszCpuFreq[]      = "CpuFreq";*/               /*MJH-030403*/
-+/** Base address for the module. */
-+static const char pszBase[]         = "base";
-+/** Reset bit for the module. */
-+static const char pszResetBit[]     = "reset_bit";
-+/** Reset base address for the module. */
-+static const char pszResetBase[]    = "ResetBase";
-+/** Interrupt line for the module. */
-+static const char pszIntLine[]      = "int_line";
-+/** VLYNQ offset for the module.  Disregard if not using VLYNQ. */
-+static const char pszOffset[]       = "offset";
-+/** The OS may "Get" this parameter, which is a pointer
-+    to a character string that indicates the version of CPHAL. */
-+static const char pszVer[]          = "Version";
-+/*@}*/
-+
-+/**
-+@defgroup Common_Control_Params Common Keys for [os]Control()
-+
-+This section documents the keys used with the OS @c Control() interface that
-+are required by CPHAL devices.
-+
-+@{
-+*/
-+/** Used to wait for an integer number of clock ticks, given as an integer
-+    pointer in the @p Value parameter.  No actions are defined. */
-+static const char pszSleep[]             = "Sleep";
-+/** Requests the OS to flush it's IO buffers.  No actions are defined. */
-+static const char pszSioFlush[]          = "SioFlush";
-+/*@}*/
-+
-+static const char pszStateChange[]       = "StateChange";
-+static const char pszStatus[]            = "Status";
-+
-+static const char pszGET[]               = "Get";
-+static const char pszSET[]               = "Set";
-+static const char pszCLEAR[]             = "Clear";
-+static const char pszNULL[]              = "";
-+static const char pszLocator[]           = "Locator";
-+static const char pszOff[]               = "Off";
-+static const char pszOn[]                = "On";
-+static const char hcMaxFrags[]           = "MaxFrags";
-+
-+#ifdef _CPHAL_CPMAC
-+
-+/*  New method for string constants */
-+const char hcClear[]  = "Clear";
-+const char hcGet[]    = "Get";
-+const char hcSet[]    = "Set";
-+
-+const char hcTick[]   = "Tick";
-+
-+static const CONTROL_KEY KeyCommon[] =
-+   {
-+     {""                   , enCommonStart},
-+     {pszStatus            , enStatus},
-+     {pszOff               , enOff},
-+     {pszOn                , enOn},
-+     {pszDebug             , enDebug},
-+     {hcCpuFrequency       , enCpuFreq},                           /*MJH~030403*/
-+     {""                   , enCommonEnd}
-+   };
-+#endif
-+
-+/**
-+@defgroup Common_Statistics Statistics
-+
-+A broad array of module statistics is available.  Statistics values are accessed
-+through the @c Control() interface of the CPHAL.  There are 5 different levels
-+of statistics, each of which correspond to a unique set of data.  Furthermore,
-+certain statistics data is indexed by using a channel number and Tx queue number.
-+The following is a brief description of each statistics level, along with the
-+indexes used for the level:
-+
-+- Level 0:  Hardware Statistics (index with channel)
-+- Level 1:  CPHAL Software Statistics (channel, queue)
-+- Level 2:  CPHAL Flags (channel, queue)
-+- Level 3:  CPHAL Channel Configuration (channel)
-+- Level 4:  CPHAL General Configuration (no index)
-+
-+The caller requests statistics information by providing a Key string to the
-+@c Control() API in the following format: "Stats;[Level #];[Ch #];[Queue #]".
-+The only valid Action parameter for statistics usage is "Get".
-+
-+Code Examples:
-+@code
-+unsigned int *StatsData;
-+
-+# Get Level 0 stats for Channel 1
-+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
-+
-+# Get Level 2 stats for Channel 0, Queue 0
-+HalFunc->Control(OsDev->HalDev, "Stats;2;0;0", "Get", &StatsData);
-+
-+# Get Level 4 stats
-+HalFunc->Control(OsDev->HalDev, "Stats;4", "Get", &StatsData);
-+@endcode
-+
-+The information returned in the Value parameter of @c Control() is an
-+array of pointers to strings.  The pointers are arranged in pairs.
-+The first pointer is a pointer to a name string for a particular statistic.
-+The next pointer is a pointer to a string containing the representation of
-+the integer statistic value corresponding to the first pointer.  This is followed
-+by another pair of pointers, and so on, until a NULL pointer is encountered.  The
-+following is example code for processing the statistics data.  Note that the OS
-+is responsible for freeing the memory passed back through the Value parameter of
-+@c Control().
-+
-+@code
-+unsigned int *StatsData;
-+
-+# Get Level 0 stats for Channel 1
-+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
-+
-+# output Statistics data
-+PrintStats(StatsData);
-+
-+# the upper layer is responsible for freeing stats info
-+free(&StatsPtr);
-+
-+...
-+
-+void PrintStats(unsigned int *StatsPtr)
-+  {
-+   while(*StatsPtr)
-+     {
-+      printf("%20s:",  (char *)*StatsPtr);
-+      StatsPtr++;
-+      printf("%11s\n", (char *)*StatsPtr);
-+      StatsPtr++;
-+     }
-+   MySioFlush();
-+  }
-+@endcode
-+
-+Within each statistics level, there are several statistics defined.  The statistics that
-+are common to every CPPI module are listed below.  In addition, each module may define
-+extra statistics in each level, which will be documented within the module-specific
-+documentation appendices.
-+
-+- Level 0 Statistics
-+  - All level 0 statistics are module-specific.
-+- Level 1 Statistics (CPHAL Software Statistics)
-+  - DmaLenErrors: Incremented when the port DMA's more data than expected (per channel). (AAL5 Only)
-+  - TxMisQCnt: Incremented when host queues a packet for transmission as the port finishes
-+transmitting the previous last packet in the queue (per channel and queue).
-+  - RxMisQCnt: Incremented when host queues adds buffers to a queue as the port finished the
-+reception of the previous last packet in the queue (per channel).
-+  - TxEOQCnt: Number of times the port has reached the end of the transmit queue (per channel and queue).
-+  - RxEOQCnt: Number of times the port has reached the end of the receive queue (per channel).
-+  - RxPacketsServiced: Number of received packets (per channel).
-+  - TxPacketsServiced: Number of transmitted packets (per channel and queue).
-+  - RxMaxServiced: Maximum number of packets that the CPHAL receive interrupt has serviced at a time (per channel).
-+  - TxMaxServiced: Maximum number of packets that the CPHAL transmit interrupt has serviced at a time (per channel and queue).
-+  - RxTotal: Total number of received packets, all channels.
-+  - TxTotal: Total number of transmitted packets, all channels and queues.
-+- Level 2 Statistics (CPHAL Flags)
-+  - RcbPool: Pointer to receive descriptor pool (per channel).
-+  - RxActQueueCount: Number of buffers currently available for receive (per channel).
-+  - RxActQueueHead: Pointer to first buffer in receive queue (per channel).
-+  - RxActQueueTail: Pointer to last buffer in receive queue (per channel).
-+  - RxActive: 0 if inactive (no buffers available), or 1 if active (buffers available).
-+  - RcbStart: Pointer to block of receive descriptors.
-+  - RxTeardownPending: 1 if Rx teardown is pending but incomplete, 0 otherwise.
-+  - TcbPool: Pointer to transmit descriptor pool (per channel and queue).
-+  - TxActQueueCount: Number of buffers currently queued to be transmitted (per channel and queue).
-+  - TxActQueueHead: Pointer to first buffer in transmit queue (per channel and queue).
-+  - TxActQueueTail: Pointer to last buffer in transmit queue (per channel and queue).
-+  - TxActive: 0 if inactive (no buffers to send), or 1 if active (buffers queued to send).
-+  - TcbStart: Pointer to block of transmit descriptors.
-+  - TxTeardownPending: 1 if Tx teardown is pending but incomplete, 0 otherwise.
-+- Level 3 Statistics (CPHAL Channel Configuration)
-+  - RxBufSize: Rx buffer size.
-+  - RxBufferOffset: Rx buffer offset.
-+  - RxNumBuffers: Number of Rx buffers.
-+  - RxServiceMax: Maximum number of receive packets to service at a time.
-+  - TxNumBuffers: Number of Tx buffer descriptors.
-+  - TxNumQueues: Number of Tx queues to use.
-+  - TxServiceMax: Maximum number of transmit packets to service at a time.
-+- Level 4 Statistics (CPHAL General Configuration)
-+  - Base Address: Base address of the module.
-+  - Offset (VLYNQ): VLYNQ relative module offset.
-+  - Interrupt Line: Interrupt number.
-+  - Debug: Debug flag, 1 to enable debug.
-+  - Inst: Instance number.
-+*/
-+
-+/* 
-+   Data Type 0 = int display
-+   Data Type 1 = hex display
-+   Data Type 2 = channel structure, int display
-+   Data Type 3 = queue index and int display
-+   Data Type 4 = queue index and hex display
-+*/
-+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) /* +GSG 030307 */
-+static STATS_TABLE StatsTable0[] =
-+  {
-+#ifdef _CPHAL_AAL5
-+   /* Name ,        Data Ptr,   Data Type */
-+   {"Crc Errors",          0,          0},
-+   {"Len Errors",          0,          0},
-+   {"Abort Errors",        0,          0},
-+   {"Starv Errors",        0,          0}
-+#endif
-+#ifdef _CPHAL_CPMAC
-+   {"Rx Good Frames",      0,          0}
-+#endif
-+  };
-+
-+static STATS_TABLE StatsTable1[] =
-+  {
-+   /* Name ,        Data Ptr,   Data Type */
-+   {"DmaLenErrors",        0,          0},
-+   {"TxMisQCnt",           0,          3},
-+   {"RxMisQCnt",           0,          0},
-+   {"TxEOQCnt",            0,          3},
-+   {"RxEOQCnt",            0,          0},
-+   {"RxPacketsServiced",   0,          0},
-+   {"TxPacketsServiced",   0,          3},
-+   {"RxMaxServiced",       0,          0},
-+   {"TxMaxServiced",       0,          3},
-+   {"RxTotal",             0,          0},
-+   {"TxTotal",             0,          0},
-+  };
-+
-+static STATS_TABLE StatsTable2[] =
-+  {
-+   /* Name ,        Data Ptr,   Data Type */
-+   {"RcbPool",             0,          1},
-+   {"RxActQueueCount",     0,          0},
-+   {"RxActQueueHead",      0,          1},
-+   {"RxActQueueTail",      0,          1},
-+   {"RxActive",            0,          0},
-+   {"RcbStart",            0,          1},
-+   {"RxTeardownPending",   0,          0},
-+   {"TcbPool",             0,          4},
-+   {"TxActQueueCount",     0,          3},
-+   {"TxActQueueHead",      0,          4},
-+   {"TxActQueueTail",      0,          4},
-+   {"TxActive",            0,          3},
-+   {"TcbStart",            0,          4},
-+   {"TxTeardownPending",   0,          0}
-+  };
-+
-+static STATS_TABLE StatsTable3[] =
-+  {
-+   /* Name ,        Data Ptr,   Data Type */
-+   {"RxBufSize",           0,          2},
-+   {"RxBufferOffset",      0,          2},
-+   {"RxNumBuffers",        0,          2},
-+   {"RxServiceMax",        0,          2},
-+   {"TxNumBuffers",        0,          2},
-+   {"TxNumQueues",         0,          2},
-+   {"TxServiceMax",        0,          2},
-+#ifdef _CPHAL_AAL5
-+   {"CpcsUU",              0,          2},
-+   {"Gfc",                 0,          2},
-+   {"Clp",                 0,          2},
-+   {"Pti",                 0,          2},
-+   {"DaMask",              0,          2},
-+   {"Priority",            0,          2},
-+   {"PktType",             0,          2},
-+   {"Vci",                 0,          2},
-+   {"Vpi",                 0,          2},
-+   {"CellRate",            0,          2},
-+   {"QosType",             0,          2},
-+   {"Mbs",                 0,          2},
-+   {"Pcr",                 0,          2}
-+#endif
-+  };
-+
-+static STATS_TABLE StatsTable4[] =
-+  {
-+   {"Base Address",        0,          1},
-+   {"Offset (VLYNQ)",      0,          0},
-+   {"Interrupt Line",      0,          0},
-+   {"Debug",               0,          0},
-+   {"Instance",            0,          0},
-+#ifdef _CPHAL_AAL5
-+   {"UniNni",              0,          0}
-+#endif
-+  };
-+
-+static STATS_DB StatsDb[] =
-+  {
-+    {(sizeof(StatsTable0)/sizeof(STATS_TABLE)), StatsTable0},
-+    {(sizeof(StatsTable1)/sizeof(STATS_TABLE)), StatsTable1},
-+    {(sizeof(StatsTable2)/sizeof(STATS_TABLE)), StatsTable2},
-+    {(sizeof(StatsTable3)/sizeof(STATS_TABLE)), StatsTable3},
-+    {(sizeof(StatsTable4)/sizeof(STATS_TABLE)), StatsTable4}
-+  };
-+#endif /* +GSG 030307 */
-+
-+#ifdef _CPHAL_CPMAC /* +RC 3.02 */
-+static void resetWait(HAL_DEVICE *HalDev)
-+  {                                                                  /*+RC3.02*/
-+  const int TickReset=64;
-+  osfuncSleep((int*)&TickReset);
-+  }                                                                  /*+RC3.02*/
-+#endif /* +RC 3.02 */
-+
-+/* I only define the reset base function for the modules
-+   that can perform a reset.  The AAL5 and AAL2 modules
-+   do not perform a reset, that is done by the shared module
-+   CPSAR */
-+#if defined(_CPHAL_CPSAR) || defined(_CPHAL_CPMAC) || defined(_CPHAL_VDMAVT)
-+/*
-+ *  Determines the reset register address to be used for a particular device.
-+ *  It will search the current device entry for Locator information.  If the
-+ *  device is a root device, there will be no Locator information, and the
-+ *  function will find and return the root reset register.  If a Locator value
-+ *  is found, the function will search each VLYNQ device entry in the system
-+ *  looking for a matching Locator.  Once it finds a VLYNQ device entry with
-+ *  a matching Locator, it will extract the "ResetBase" parameter from that
-+ *  VLYNQ device entry (thus every VLYNQ entry must have the ResetBase parameter).
-+ *
-+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *  @param  ResetBase Pointer to integer address of reset register.
-+ *
-+ *  @return 0 OK, Non-zero not OK
-+ */
-+static int ResetBaseGet(HAL_DEVICE *HalDev, bit32u *ResetBase)
-+  {
-+   char *DeviceInfo = HalDev->DeviceInfo;
-+   char *MyLocator, *NextLocator;
-+   int Inst=1;
-+   bit32u error_code;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpcommon]ResetBaseGet(HalDev:%08x, ResetBase:%08x)\n", (bit32u)HalDev, ResetBase);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &MyLocator);
-+   if (error_code)
-+     {
-+      /* if no Locator value, device is on the root, so get the "reset" device */
-+      error_code = HalDev->OsFunc->DeviceFindInfo(0, "reset", &DeviceInfo);
-+      if  (error_code)
-+        {
-+         return(EC_VAL_DEVICE_NOT_FOUND);
-+        }
-+
-+      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "base", ResetBase);
-+      if (error_code)
-+        {
-+         return(EC_VAL_BASE_ADDR_NOT_FOUND);
-+        }
-+
-+      *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
-+
-+      /* found base address for root device, so we're done */
-+      return (EC_NO_ERRORS);
-+     }
-+    else
-+     {
-+      /* we have a Locator value, so the device is remote */
-+
-+      /* Find a vlynq device with a matching locator value */
-+      while ((HalDev->OsFunc->DeviceFindInfo(Inst, "vlynq", &DeviceInfo)) == EC_NO_ERRORS)
-+        {
-+         error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &NextLocator);
-+         if (error_code)
-+           {
-+            /* no Locator value for this VLYNQ, so move on */
-+            continue;
-+           }
-+         if (HalDev->OsFunc->Strcmpi(MyLocator, NextLocator)==0)
-+           {
-+            /* we have found a VLYNQ with a matching Locator, so extract the ResetBase */
-+            error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "ResetBase", ResetBase);
-+            if (error_code)
-+              {
-+               return(EC_VAL_BASE_ADDR_NOT_FOUND);
-+              }
-+            *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
-+
-+            /* found base address for root device, so we're done */
-+            return (EC_NO_ERRORS);
-+           }
-+         Inst++;
-+        } /* while */
-+     } /* else */
-+
-+   return (EC_NO_ERRORS);
-+  }
-+#endif
-+
-+#ifndef _CPHAL_AAL2 /* + RC 3.02 */
-+static bit32u ConfigGetCommon(HAL_DEVICE *HalDev)
-+  {
-+   bit32u ParmValue;
-+   bit32 error_code;
-+   char *DeviceInfo = HalDev->DeviceInfo;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpcommon]ConfigGetCommon(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszBase, &ParmValue);
-+   if (error_code)
-+     {
-+      return(EC_FUNC_HAL_INIT|EC_VAL_BASE_ADDR_NOT_FOUND);
-+     }
-+   HalDev->dev_base = ((bit32u)PhysToVirtNoCache(ParmValue));
-+
-+#ifndef _CPHAL_AAL5
-+#ifndef _CPHAL_AAL2
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszResetBit, &ParmValue);
-+   if(error_code)
-+     {
-+      return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BIT_NOT_FOUND);
-+     }
-+   HalDev->ResetBit = ParmValue;
-+
-+   /* Get reset base address */
-+   error_code = ResetBaseGet(HalDev, &ParmValue);
-+   if (error_code)
-+     return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BASE_NOT_FOUND);
-+   HalDev->ResetBase = ParmValue;
-+#endif
-+#endif
-+
-+#ifndef _CPHAL_CPSAR
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszIntLine,&ParmValue);
-+   if (error_code)
-+     {
-+      return(EC_FUNC_HAL_INIT|EC_VAL_INTERRUPT_NOT_FOUND);
-+     }
-+   HalDev->interrupt = ParmValue;
-+#endif
-+
-+   /* only look for the offset if there is a Locator field, which indicates that
-+      the module is a VLYNQ module */
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszLocator,&ParmValue);
-+   if (!error_code)
-+     {
-+      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszOffset,&ParmValue);
-+      if (error_code)
-+        {
-+         return(EC_FUNC_HAL_INIT|EC_VAL_OFFSET_NOT_FOUND);
-+        }
-+      HalDev->offset = ParmValue;
-+     }
-+    else
-+      HalDev->offset = 0;
-+
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszDebug, &ParmValue);
-+   if (!error_code) HalDev->debug = ParmValue;
-+
-+   return (EC_NO_ERRORS);
-+  }
-+#endif /* +RC 3.02 */
-+
-+#ifdef _CPHAL_CPMAC /* +RC 3.02 */
-+static void StatsInit(HAL_DEVICE *HalDev)                             /* +() RC3.02 */
-+  {
-+   /* even though these statistics may be for multiple channels and
-+      queues, i need only configure the pointer to the beginning
-+      of the array, and I can index from there if necessary */
-+
-+#ifdef _CPHAL_AAL5
-+   StatsTable0[0].StatPtr  = &HalDev->Stats.CrcErrors[0];
-+   StatsTable0[1].StatPtr  = &HalDev->Stats.LenErrors[0];
-+   StatsTable0[2].StatPtr  = &HalDev->Stats.AbortErrors[0];
-+   StatsTable0[3].StatPtr  = &HalDev->Stats.StarvErrors[0];
-+
-+   StatsTable1[0].StatPtr  = &HalDev->Stats.DmaLenErrors[0];
-+   StatsTable1[1].StatPtr  = &HalDev->Stats.TxMisQCnt[0][0];
-+   StatsTable1[2].StatPtr  = &HalDev->Stats.RxMisQCnt[0];
-+   StatsTable1[3].StatPtr  = &HalDev->Stats.TxEOQCnt[0][0];
-+   StatsTable1[4].StatPtr  = &HalDev->Stats.RxEOQCnt[0];
-+   StatsTable1[5].StatPtr  = &HalDev->Stats.RxPacketsServiced[0];
-+   StatsTable1[6].StatPtr  = &HalDev->Stats.TxPacketsServiced[0][0];
-+   StatsTable1[7].StatPtr  = &HalDev->Stats.RxMaxServiced;
-+   StatsTable1[8].StatPtr  = &HalDev->Stats.TxMaxServiced[0][0];
-+   StatsTable1[9].StatPtr  = &HalDev->Stats.RxTotal;
-+   StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal;
-+#endif
-+
-+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC))
-+   StatsTable2[0].StatPtr  = (bit32u *)&HalDev->RcbPool[0];
-+   StatsTable2[1].StatPtr  = &HalDev->RxActQueueCount[0];
-+   StatsTable2[2].StatPtr  = (bit32u *)&HalDev->RxActQueueHead[0];
-+   StatsTable2[3].StatPtr  = (bit32u *)&HalDev->RxActQueueTail[0];
-+   StatsTable2[4].StatPtr  = &HalDev->RxActive[0];
-+   StatsTable2[5].StatPtr  = (bit32u *)&HalDev->RcbStart[0];
-+   StatsTable2[6].StatPtr  = &HalDev->RxTeardownPending[0];
-+   StatsTable2[7].StatPtr  = (bit32u *)&HalDev->TcbPool[0][0];
-+   StatsTable2[8].StatPtr  = &HalDev->TxActQueueCount[0][0];
-+   StatsTable2[9].StatPtr  = (bit32u *)&HalDev->TxActQueueHead[0][0];
-+   StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0];
-+   StatsTable2[11].StatPtr = &HalDev->TxActive[0][0];
-+   StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0];
-+   StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0];
-+
-+   StatsTable3[0].StatPtr  = &HalDev->ChData[0].RxBufSize;
-+   StatsTable3[1].StatPtr  = &HalDev->ChData[0].RxBufferOffset;
-+   StatsTable3[2].StatPtr  = &HalDev->ChData[0].RxNumBuffers;
-+   StatsTable3[3].StatPtr  = &HalDev->ChData[0].RxServiceMax;
-+   StatsTable3[4].StatPtr  = &HalDev->ChData[0].TxNumBuffers;
-+   StatsTable3[5].StatPtr  = &HalDev->ChData[0].TxNumQueues;
-+   StatsTable3[6].StatPtr  = &HalDev->ChData[0].TxServiceMax;
-+#ifdef _CPHAL_AAL5
-+   StatsTable3[7].StatPtr  = &HalDev->ChData[0].CpcsUU;
-+   StatsTable3[8].StatPtr  = &HalDev->ChData[0].Gfc;
-+   StatsTable3[9].StatPtr  = &HalDev->ChData[0].Clp;
-+   StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti;
-+   StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask;
-+   StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority;
-+   StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType;
-+   StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci;
-+   StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi;
-+   StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate;
-+   StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType;
-+   StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs;
-+   StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr;
-+#endif
-+#endif
-+
-+   StatsTable4[0].StatPtr  = &HalDev->dev_base;
-+   StatsTable4[1].StatPtr  = &HalDev->offset;
-+   StatsTable4[2].StatPtr  = &HalDev->interrupt;
-+   StatsTable4[3].StatPtr  = &HalDev->debug;
-+   StatsTable4[4].StatPtr  = &HalDev->Inst;
-+  }
-+#endif /* +RC 3.02 */
-+
-+#ifndef _CPHAL_CPSAR /* +RC 3.02 */
-+#ifndef _CPHAL_AAL2 /* +RC 3.02 */
-+/*
-+ *  Returns statistics information.
-+ *
-+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *
-+ *  @return 0
-+ */
-+static int StatsGet(HAL_DEVICE *HalDev, void **StatPtr, int Index, int Ch, int Queue)
-+  {
-+   int Size;
-+   bit32u *AddrPtr;
-+   char *DataPtr;
-+   STATS_TABLE *StatsTable;
-+   int i, NumberOfStats;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpcommon]StatsGet(HalDev:%08x, StatPtr:%08x)\n",
-+                (bit32u)HalDev, (bit32u)StatPtr);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   StatsTable = StatsDb[Index].StatTable;
-+   NumberOfStats = StatsDb[Index].NumberOfStats;
-+
-+   Size = sizeof(bit32u)*((NumberOfStats*2)+1);
-+   Size += (NumberOfStats*11);
-+   *StatPtr = (bit32u *)HalDev->OsFunc->Malloc(Size);
-+
-+   AddrPtr = (bit32u *) *StatPtr;
-+   DataPtr = (char *)AddrPtr;
-+   DataPtr += sizeof(bit32u)*((NumberOfStats*2)+1);
-+
-+   for (i=0; i<NumberOfStats; i++)
-+     {
-+      *AddrPtr++ = (bit32u)StatsTable[i].StatName;
-+      *AddrPtr++ = (bit32u)DataPtr;
-+      if (&StatsTable[i].StatPtr[Ch] != 0)
-+        {
-+         switch(StatsTable[i].DataType)
-+           {
-+            case 0:
-+              HalDev->OsFunc->Sprintf(DataPtr, "%d", (bit32u *)StatsTable[i].StatPtr[Ch]);
-+              break;
-+            case 1:
-+              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", (bit32u *)StatsTable[i].StatPtr[Ch]);
-+              break;
-+            case 2:
-+              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch * (sizeof(CHANNEL_INFO)/4))));
-+              break;
-+            case 3:
-+              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
-+              break;
-+            case 4:
-+              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
-+              break;
-+            default:
-+              /* invalid data type, due to CPHAL programming error */
-+              break;
-+           }
-+        }
-+       else
-+        {
-+         /* invalid statistics pointer, probably was not initialized */
-+        }
-+      DataPtr += HalDev->OsFunc->Strlen(DataPtr) + 1;
-+     }
-+
-+   *AddrPtr = (bit32u) 0;
-+
-+   return (EC_NO_ERRORS);
-+  }
-+#endif /* +RC 3.02 */
-+#endif /* +RC 3.02 */
-+
-+#ifdef _CPHAL_CPMAC
-+static void gpioFunctional(int base, int bit)
-+  {                                                                  /*+RC3.02*/
-+  bit32u GpioEnr = base + 0xC;
-+  /*  To make functional, set to zero  */
-+  *(volatile bit32u *)(GpioEnr) &= ~(1 << bit);                      /*+RC3.02*/
-+  }                                                                  /*+RC3.02*/
-+
-+
-+/*+RC3.02*/
-+/* Common function, Checks to see if GPIO should be in functional mode */
-+static void gpioCheck(HAL_DEVICE *HalDev, void *moduleDeviceInfo)
-+  {                                                                  /*+RC3.02*/
-+  int rc;
-+  void *DeviceInfo;
-+  char *pszMuxBits;
-+  char pszMuxBit[20];
-+  char *pszTmp;
-+  char szMuxBit[20];
-+  char *ptr;
-+  int base;
-+  int reset_bit;
-+  int bit;
-+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+
-+  rc = OsFunc->DeviceFindParmValue(moduleDeviceInfo, "gpio_mux",&pszTmp);
-+  if(rc) return;
-+  /*  gpio entry found, get GPIO register info and make functional  */
-+
-+  /* temp copy until FinParmValue fixed */
-+  ptr = &szMuxBit[0];
-+  while ((*ptr++ = *pszTmp++));
-+
-+  pszMuxBits = &szMuxBit[0];
-+
-+  rc = OsFunc->DeviceFindInfo(0,"gpio",&DeviceInfo);
-+  if(rc) return;
-+
-+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",&base);
-+  if(rc) return;
-+
-+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit);
-+  if(rc) return;
-+
-+  /* If GPIO still in reset, then exit  */
-+  if((VOLATILE32(HalDev->ResetBase) & (1 << reset_bit)) == 0)
-+    return;
-+  /*  format for gpio_mux is  gpio_mux = <int>;<int>;<int>...*/
-+  while (*pszMuxBits)
-+    {
-+    pszTmp = &pszMuxBit[0];
-+    if(*pszMuxBits == ';') pszMuxBits++;
-+    while ((*pszMuxBits != ';') && (*pszMuxBits != '\0'))
-+      {
-+      osfuncSioFlush();
-+      /*If value not a number, skip */
-+      if((*pszMuxBits < '0') || (*pszMuxBits > '9'))
-+        pszMuxBits++;
-+      else
-+        *pszTmp++ = *pszMuxBits++;
-+      }
-+    *pszTmp = '\0';
-+    bit = OsFunc->Strtoul(pszMuxBit, &pszTmp, 10);
-+    gpioFunctional(base, bit);
-+    resetWait(HalDev);  /* not sure if this is needed */
-+    }
-+  }                                                                  /*+RC3.02*/
-+#endif  /* CPMAC  */
-+
-+#ifdef _CPHAL_AAL5
-+const char hcSarFrequency[] = "SarFreq";
-+#endif
-+
-+#endif  /* _INC  */
-diff -urN linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.h linux.dev/drivers/net/avalanche_cpmac/cpcommon_cpmac.h
---- linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cpcommon_cpmac.h	2005-07-12 02:48:41.996601000 +0200
-@@ -0,0 +1,79 @@
-+#ifndef _INC_CPCOMMON_H
-+#define _INC_CPCOMMON_H
-+
-+#define VOLATILE32(addr)  (*(volatile bit32u *)(addr))
-+#ifndef dbgPrintf
-+#define dbgPrintf HalDev->OsFunc->Printf
-+#endif
-+
-+#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field
-+
-+#define DBG(level)  (HalDev->debug & (1<<(level)))
-+/*
-+#define DBG0()      DBG(0)
-+#define DBG1()      DBG(1)
-+#define DBG2()      DBG(2)
-+#define DBG3()      DBG(3)
-+#define DBG4()      DBG(4)
-+#define DBG5()      DBG(5)
-+#define DBG6()      DBG(6)
-+#define DBG7()      DBG(7)
-+*/
-+
-+/*
-+ *  List of defined actions for use with Control().
-+ */
-+typedef enum 
-+  {
-+   enGET=0,     /**< Get the value associated with a key */
-+   enSET,       /**< Set the value associates with a key */
-+   enCLEAR,     /**<Clear the value */ 
-+   enNULL       /**< No data action, used to initiate a service or send a message */
-+  }ACTION;
-+
-+/*
-+ *  Enumerated hardware states.
-+ */
-+typedef enum
-+  {
-+   enConnected=1, enDevFound, enInitialized, enOpened
-+  }DEVICE_STATE;
-+
-+typedef enum 
-+  {
-+   enCommonStart=0,
-+   /* General  */
-+   enOff, enOn, enDebug, 
-+   /* Module General */
-+   enCpuFreq, 
-+   enStatus,
-+   enCommonEnd
-+   }COMMON_KEY;
-+
-+typedef struct
-+  {
-+   const char  *strKey;
-+   int  enKey;
-+  }CONTROL_KEY;
-+
-+typedef struct
-+  {
-+   char *StatName;
-+   unsigned int *StatPtr;
-+   int DataType; /* 0: int, 1: hex int, 2:channel data */
-+  }STATS_TABLE;
-+
-+typedef struct
-+  {
-+   int NumberOfStats;
-+   STATS_TABLE *StatTable;
-+  }STATS_DB;
-+
-+#define osfuncSioFlush()    HalDev->OsFunc->Control(HalDev->OsDev,"SioFlush",pszNULL,0)
-+#define osfuncSleep(Ticks)  HalDev->OsFunc->Control(HalDev->OsDev,pszSleep,pszNULL,Ticks)
-+#define osfuncStateChange() HalDev->OsFunc->Control(HalDev->OsDev,pszStateChange,pszNULL,0)
-+
-+#define CHANNEL_NAMES {"Ch0","Ch1","Ch2","Ch3","Ch4","Ch5","Ch6","Ch7","Ch8","Ch9","Ch10","Ch11","Ch12","Ch13","Ch14","Ch15"}
-+
-+#endif
-+
-diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac.c linux.dev/drivers/net/avalanche_cpmac/cpmac.c
---- linux.old/drivers/net/avalanche_cpmac/cpmac.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cpmac.c	2005-07-22 01:03:12.609318544 +0200
-@@ -0,0 +1,2504 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    CPMAC Linux Network Device Driver Source
-+ ******************************************************************************
-+ * FILE NAME:       cpmac.c
-+ *
-+ * DESCRIPTION:     CPMAC Network Device Driver Source
-+ *
-+ * REVISION HISTORY:
-+ *
-+ * Date           Description                               Author
-+ *-----------------------------------------------------------------------------
-+ * 27 Nov 2002    Initial Creation                          Suraj S Iyer  
-+ * 09 Jun 2003    Updates for GA                            Suraj S Iyer
-+ * 30 Sep 2003    Updates for LED, Reset stats              Suraj S Iyer
-+ * 
-+ * (C) Copyright 2003, Texas Instruments, Inc
-+ *******************************************************************************/
-+#include <linux/kernel.h> 
-+#include <linux/module.h> 
-+#include <linux/init.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/delay.h>     
-+#include <linux/spinlock.h>
-+#include <linux/proc_fs.h>
-+#include <linux/ioport.h>
-+#include <asm/io.h>
-+
-+#include <linux/skbuff.h>
-+
-+#include <asm/mips-boards/prom.h>
-+#include <linux/string.h>
-+#include <asm/uaccess.h>
-+#include <linux/config.h>
-+#include <asm/ar7/if_port.h>
-+
-+extern void build_psp_config(void);
-+extern void psp_config_cleanup(void);
-+
-+#include "cpmacHalLx.h"
-+#include "cpmac.h"
-+
-+static struct net_device *last_cpmac_device = NULL;
-+static int    cpmac_devices_installed = 0;
-+
-+void xdump( u_char*  cp, int  length, char*  prefix );
-+
-+unsigned int  cpmac_cpu_freq = 0;
-+
-+char cpmac_version[] = "1.5";
-+
-+char l3_align_array[]            = {0x02, 0x01, 0x00, 0x03};
-+#define L3_ALIGN(i)                l3_align_array[i]
-+
-+char add_for_4byte_align[]       = {0x04, 0x03, 0x02, 0x05};
-+#define ADD_FOR_4BYTE_ALIGN(i)     add_for_4byte_align[i]
-+
-+
-+#define TPID                       0x8100
-+#define IS_802_1Q_FRAME(byte_ptr)  (*(unsigned short*)byte_ptr == TPID)
-+#define TPID_START_OFFSET          12
-+#define TCI_START_OFFSET           14
-+#define TCI_LENGTH                 2
-+#define TPID_LENGTH                2
-+#define TPID_END_OFFSET            (TPID_START_OFFSET + TPID_LENGTH)
-+#define TCI_END_OFFSET             (TCI_START_OFFSET  + TCI_LENGTH)
-+#define IS_VALID_VLAN_ID(byte_ptr) ((*(unsigned short*)byte_ptr) && 0xfff != 0)
-+#define MAX_CLASSES                8
-+#define MAX_USER_PRIORITY          8
-+#define CONTROL_802_1Q_SIZE        (TCI_LENGTH + TPID_LENGTH)
-+
-+unsigned char user_priority_to_traffic_class_map[MAX_CLASSES][MAX_USER_PRIORITY] = 
-+{ 
-+  {0, 0, 0, 1, 1, 1, 1, 2}, 
-+  {0, 0, 0, 0, 0, 0, 0, 0}, 
-+  {0, 0, 0, 0, 0, 0, 0, 1}, 
-+  {0, 0, 0, 1, 1, 2, 2, 3}, 
-+  {0, 1, 1, 2, 2, 3, 3, 4}, 
-+  {0, 1, 1, 2, 3, 4, 4, 5}, 
-+  {0, 1, 2, 3, 4, 5, 5, 6}, 
-+  {0, 1, 2, 3, 4, 5, 6, 7}
-+};
-+
-+#define GET_802_1P_CHAN(x,y) user_priority_to_traffic_class_map[x][(y & 0xe0)]
-+
-+#if defined(CONFIG_MIPS_SEAD2)
-+unsigned long temp_base_address[2] = {0xa8610000, 0xa8612800};
-+unsigned long temp_reset_value[2] = { 1<< 17,1<<21};
-+#define RESET_REG_PRCR   (*(volatile unsigned int *)((0xa8611600 + 0x0)))
-+#define VERSION(base)   (*(volatile unsigned int *)(((base)|0xa0000000) + 0x0))
-+#endif
-+
-+MODULE_AUTHOR("Maintainer: Suraj S Iyer <ssiyer@ti.com>");
-+MODULE_DESCRIPTION("Driver for TI CPMAC");
-+
-+static int cfg_link_speed = 0;
-+MODULE_PARM(cfg_link_speed, "i");
-+MODULE_PARM_DESC(cfg_link_speed, "Fixed speed of the Link: <100/10>");
-+
-+static char *cfg_link_mode = NULL;
-+MODULE_PARM(cfg_link_mode, "1-3s");
-+MODULE_PARM_DESC(cfg_link_mode, "Fixed mode of the Link: <fd/hd>");
-+
-+int cpmac_debug_mode = 0;
-+MODULE_PARM(debug_mode, "i");
-+MODULE_PARM_DESC(debug_mode, "Turn on the debug info: <0/1>. Default is 0 (off)");
-+
-+#define dbgPrint if (cpmac_debug_mode) printk
-+#define errPrint printk
-+
-+static int g_cfg_start_link_params = CFG_START_LINK_SPEED;
-+static int g_init_enable_flag      = 0;
-+static int cfg_start_link_speed;
-+static int cpmac_max_frame_size;
-+
-+static struct net_device *g_dev_array[2];
-+static struct proc_dir_entry *gp_stats_file = NULL;
-+
-+//-----------------------------------------------------------------------------
-+// Statistics related private functions.
-+//----------------------------------------------------------------------------- 
-+static int  cpmac_p_update_statistics(struct net_device *p_dev, char *buf, int limit, int *len);
-+static int  cpmac_p_read_rfc2665_stats(char *buf, char **start, off_t offset, int count, int *eof, void *data);
-+static int  cpmac_p_read_link(char *buf, char **start, off_t offset, int count, int *eof, void *data);
-+static int  cpmac_p_read_stats(char* buf, char **start, off_t offset, int count, int *eof, void *data);
-+static int  cpmac_p_write_stats (struct file *fp, const char * buf, unsigned long count, void * data);
-+static int  cpmac_p_reset_statistics (struct net_device *p_dev);
-+static int  cpmac_p_get_version(char *buf, char **start, off_t offset, int count, int *eof, void *data);
-+
-+static int  cpmac_p_detect_manual_cfg(int, char*, int);
-+static int  cpmac_p_process_status_ind(CPMAC_PRIVATE_INFO_T *p_cpmac_priv);
-+
-+//-----------------------------------------------------------------------------
-+// Timer related private functions.
-+//-----------------------------------------------------------------------------
-+static int  cpmac_p_timer_init(CPMAC_PRIVATE_INFO_T *p_cpmac_priv);
-+// static int  cpmac_timer_cleanup(CPMAC_PRIVATE_INFO_T *p_cpmac_priv);
-+static void cpmac_p_tick_timer_expiry(unsigned long p_cb_param);
-+inline static int cpmac_p_start_timer(struct timer_list *p_timer, unsigned int delay_ticks);
-+static int  cpmac_p_stop_timer(struct timer_list *p_timer);
-+
-+//------------------------------------------------------------------------------
-+// Device configuration and setup related private functions.
-+//------------------------------------------------------------------------------
-+static int cpmac_p_probe_and_setup_device(CPMAC_PRIVATE_INFO_T *p_cpmac_priv, unsigned long *p_dev_flags);
-+static int cpmac_p_setup_driver_params(CPMAC_PRIVATE_INFO_T *p_cpmac_priv);
-+inline static int cpmac_p_rx_buf_setup(CPMAC_RX_CHAN_INFO_T *p_rx_chan);
-+
-+//-----------------------------------------------------------------------------
-+// Net device related private functions.
-+//-----------------------------------------------------------------------------
-+static int  cpmac_dev_init(struct net_device *p_dev);
-+static int  cpmac_dev_open( struct net_device *dev );
-+static int  cpmac_dev_close(struct net_device *p_dev);
-+static void cpmac_dev_mcast_set(struct net_device *p_dev);
-+static int cpmac_dev_set_mac_addr(struct net_device *p_dev,void * addr);
-+static int  cpmac_dev_tx( struct sk_buff *skb, struct net_device *p_dev);
-+static struct net_device_stats *cpmac_dev_get_net_stats (struct net_device *dev);
-+
-+static int cpmac_p_dev_enable( struct net_device *p_dev);
-+
-+
-+
-+/* Max. Reserved headroom in front of each packet so that the headers can be added to
-+ * a packet. Worst case scenario would be PPPoE + 2684 LLC Encapsulation + Ethernet
-+ * header. */
-+#define MAX_RESERVED_HEADROOM       20
-+
-+/* This is the MAX size of the static buffer for pure data. */
-+#define MAX_SIZE_STATIC_BUFFER      1600
-+
-+typedef struct DRIVER_BUFFER
-+{
-+	/* Pointer to the allocated data buffer. This is the static data buffer 
-+     * allocated for the TI-Cache. 60 bytes out of the below buffer are required
-+     * by the SKB shared info. We always reserve at least MAX_RESERVED_HEADROOM bytes 
-+     * so that the packets always have sufficient headroom. */
-+	char					ptr_buffer[MAX_SIZE_STATIC_BUFFER + MAX_RESERVED_HEADROOM + 60];
-+
-+	/* List of the driver buffers. */
-+	struct DRIVER_BUFFER*	ptr_next;
-+}DRIVER_BUFFER;
-+
-+typedef struct DRIVER_BUFFER_MCB
-+{
-+	/* List of the driver buffers. */
-+	DRIVER_BUFFER*	ptr_available_driver_buffers;
-+
-+    /* The number of available buffers. */
-+    int                     num_available_buffers;
-+}DRIVER_BUFFER_MCB;
-+
-+DRIVER_BUFFER_MCB	driver_mcb;
-+int                 hybrid_mode = 0;
-+
-+static union {
-+	struct sk_buff_head	list;
-+	char			pad[SMP_CACHE_BYTES];
-+} skb_head_pool[NR_CPUS];
-+
-+/**************************************************************************
-+ * FUNCTION NAME : ti_release_skb
-+ **************************************************************************
-+ * DESCRIPTION   :
-+ *  This function is called from the ti_alloc_skb when there were no more
-+ *  data buffers available. The allocated SKB had to released back to the 
-+ *  data pool. The reason why this function was moved from the fast path 
-+ *  below was because '__skb_queue_head' is an inline function which adds
-+ *  a large code chunk on the fast path.
-+ *
-+ * NOTES         :
-+ *  This function is called with interrupts disabled. 
-+ **************************************************************************/
-+static void ti_release_skb (struct sk_buff_head* list, struct sk_buff* skb)
-+{
-+    __skb_queue_head(list, skb);
-+    return;
-+}
-+
-+/**************************************************************************
-+ * FUNCTION NAME : ti_alloc_skb
-+ **************************************************************************
-+ * DESCRIPTION   :
-+ *  The function is called to allocate memory from the static allocated 
-+ *  TI-Cached memory pool.
-+ *
-+ * RETURNS       :
-+ *      Allocated static memory buffer - Success
-+ *      NULL                           - Error.
-+ **************************************************************************/
-+struct sk_buff *ti_alloc_skb(unsigned int size,int gfp_mask)
-+{
-+    register struct sk_buff*    skb;
-+    unsigned long               flags;
-+	struct sk_buff_head*        list;
-+	DRIVER_BUFFER*	            ptr_node = NULL;
-+
-+    /* Critical Section Begin: Lock out interrupts. */
-+    local_irq_save(flags);
-+
-+    /* Get the SKB Pool list associated with the processor and dequeue the head. */
-+    list = &skb_head_pool[smp_processor_id()].list;
-+    skb = __skb_dequeue(list);
-+
-+    /* Align the data size. */
-+    size = SKB_DATA_ALIGN(size);
-+
-+    /* Did we get one. */
-+    if (skb != NULL)
-+    {
-+        /* YES. Now get a data block from the head of statically allocated block. */
-+        ptr_node = driver_mcb.ptr_available_driver_buffers;
-+	    if (ptr_node != NULL)
-+        {
-+            /* YES. Got a data block. Advance the free list pointer to the next available buffer. */
-+	        driver_mcb.ptr_available_driver_buffers = ptr_node->ptr_next;
-+            ptr_node->ptr_next = NULL;
-+
-+            /* Decrement the number of available data buffers. */
-+            driver_mcb.num_available_buffers = driver_mcb.num_available_buffers - 1;
-+        }
-+        else
-+        {
-+          /* NO. Was unable to get a data block. So put the SKB back on the free list. 
-+           * This is slow path. */
-+#ifdef DEBUG_SKB 
-+           printk ("DEBUG: No Buffer memory available: Number of free buffer:%d.\n",
-+                   driver_mcb.num_available_buffers);
-+#endif
-+           ti_release_skb (list, skb);
-+        }
-+    }
-+
-+    /* Critical Section End: Unlock interrupts. */
-+    local_irq_restore(flags);
-+
-+    /* Did we get an SKB and data buffer. Proceed only if we were succesful in getting both else drop */
-+    if (skb != NULL && ptr_node != NULL)
-+    {
-+       	/* XXX: does not include slab overhead */ 
-+        skb->truesize = size + sizeof(struct sk_buff);
-+ 
-+        /* Load the data pointers. */
-+     	skb->head = ptr_node->ptr_buffer;
-+        skb->data = ptr_node->ptr_buffer + MAX_RESERVED_HEADROOM;
-+	    skb->tail = ptr_node->ptr_buffer + MAX_RESERVED_HEADROOM;
-+        skb->end  = ptr_node->ptr_buffer + size + MAX_RESERVED_HEADROOM;
-+
-+	    /* Set up other state */
-+    	skb->len    = 0;
-+    	skb->cloned = 0;
-+        skb->data_len = 0;
-+    
-+        /* Mark the SKB indicating that the SKB is from the TI cache. */
-+        skb->cb[45] = 1;
-+
-+    	atomic_set(&skb->users, 1); 
-+    	atomic_set(&(skb_shinfo(skb)->dataref), 1);
-+        skb_shinfo(skb)->nr_frags = 0;
-+	    skb_shinfo(skb)->frag_list = NULL;
-+        return skb;
-+    }
-+    else
-+    {
-+        /* Control comes here only when there is no statically allocated data buffers
-+         * available. This case is handled using the mode selected
-+         *
-+         * 1. Hybrid Mode.
-+         *  In that case lets jump to the old allocation code. This way we
-+         *  can allocate a small number of data buffers upfront and the rest will hit
-+         *  this portion of the code, which is slow path. Note the number of hits here
-+         *  should be kept as low as possible to satisfy performance requirements. 
-+         *
-+         * 2. Pure Static Mode.
-+         *  Return NULL the user should have tuned the number of static buffers for
-+         *  worst case scenario. So return NULL and let the drivers handle the error. */
-+        if (hybrid_mode == 1)
-+        {
-+            /* Hybrid Mode: Old allocation. */
-+            return dev_alloc_skb(size);
-+        }
-+        else
-+        {
-+            /* Pure Static Mode: No buffers available. */
-+            return NULL;
-+        }
-+    }
-+}
-+
-+/**************************************************************************
-+ * FUNCTION NAME : ti_skb_release_fragment
-+ **************************************************************************
-+ * DESCRIPTION   :
-+ *  This function is called to release fragmented packets. This is NOT in 
-+ *  the fast path and this function requires some work. 
-+ **************************************************************************/
-+static void ti_skb_release_fragment(struct sk_buff *skb)
-+{
-+    if (skb_shinfo(skb)->nr_frags)
-+    {
-+        /* PANKAJ TODO: This portion has not been tested. */
-+	    int i;
-+#ifdef DEBUG_SKB 
-+        printk ("DEBUG: Releasing fragments in TI-Cached code.\n");
-+#endif
-+		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
-+		    printk ("DEBUG: Fragmented Page = 0x%p.\n", skb_shinfo(skb)->frags[i].page);
-+    }
-+
-+    /* Check if there were any fragments present and if so clean all the SKB's. 
-+     * This is required to recursivly clean the SKB's. */
-+	if (skb_shinfo(skb)->frag_list)
-+	    skb_drop_fraglist(skb);
-+
-+    return;
-+}
-+
-+/**************************************************************************
-+ * FUNCTION NAME : ti_skb_release_data
-+ **************************************************************************
-+ * DESCRIPTION   :
-+ *  The function is called to release the SKB back into the TI-Cached static
-+ *  memory pool. 
-+ **************************************************************************/
-+static void ti_skb_release_data(struct sk_buff *skb)
-+{
-+    DRIVER_BUFFER*	ptr_node;
-+    unsigned long   flags;
-+
-+    /* The SKB data can be cleaned only if the packet has not been cloned and we
-+     * are the only one holding a reference to the data. */
-+	if (!skb->cloned || atomic_dec_and_test(&(skb_shinfo(skb)->dataref)))
-+    {
-+        /* Are there any fragments associated with the SKB ?*/
-+		if ((skb_shinfo(skb)->nr_frags != 0) || (skb_shinfo(skb)->frag_list != NULL))
-+        {
-+            /* Slow Path: Try and clean up the fragments. */
-+            ti_skb_release_fragment (skb);
-+        }
-+
-+        /* Cleanup the SKB data memory. This is fast path. */
-+        ptr_node = (DRIVER_BUFFER *)skb->head;
-+
-+        /* Critical Section: Lock out interrupts. */
-+        local_irq_save(flags);
-+
-+        /* Add the data buffer to the list of available buffers. */
-+        ptr_node->ptr_next = driver_mcb.ptr_available_driver_buffers;
-+	    driver_mcb.ptr_available_driver_buffers = ptr_node;
-+
-+        /* Increment the number of available data buffers. */
-+        driver_mcb.num_available_buffers = driver_mcb.num_available_buffers + 1;
-+
-+        /* Criticial Section: Unlock interrupts. */
-+        local_irq_restore(flags);
-+	}
-+    return;
-+}
-+
-+
-+
-+
-+static unsigned char str2hexnum(unsigned char c)
-+{
-+        if(c >= '0' && c <= '9')
-+                return c - '0';
-+        if(c >= 'a' && c <= 'f')
-+                return c - 'a' + 10;
-+        if(c >= 'A' && c <= 'F')
-+                return c - 'A' + 10;
-+        return 0; 
-+}
-+
-+static void str2eaddr(unsigned char *ea, unsigned char *str)
-+{
-+    int i;
-+    unsigned char num;
-+    for(i = 0; i < 6; i++) {
-+        if((*str == '.') || (*str == ':'))
-+            str++;
-+        num = str2hexnum(*str++) << 4;
-+        num |= (str2hexnum(*str++));
-+        ea[i] = num;
-+    }
-+}
-+
-+//-----------------------------------------------------------------------------
-+// Statistics related private functions.
-+//-----------------------------------------------------------------------------
-+static int cpmac_p_update_statistics(struct net_device *p_dev, char *buf, int limit, int *p_len)
-+{
-+    int                 ret_val   = -1;
-+    unsigned long rx_hal_errors   = 0;
-+    unsigned long rx_hal_discards = 0;
-+    unsigned long tx_hal_errors   = 0;
-+    unsigned long ifOutDiscards   = 0;
-+    unsigned long ifInDiscards    = 0;
-+    unsigned long ifOutErrors     = 0;
-+    unsigned long ifInErrors      = 0;
-+
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
-+    CPMAC_DEVICE_MIB_T   *p_device_mib = p_cpmac_priv->device_mib;
-+    CPMAC_DRV_STATS_T    *p_stats      = p_cpmac_priv->stats;
-+    CPMAC_DEVICE_MIB_T   local_mib;
-+    CPMAC_DEVICE_MIB_T   *p_local_mib  = &local_mib;
-+
-+    struct net_device_stats *p_net_dev_stats = &p_cpmac_priv->net_dev_stats;
-+
-+    int                 len      = 0;
-+    int  dev_mib_elem_count      = 0;
-+
-+    /* do not access the hardware if it is in the reset state. */
-+    if(!test_bit(0, &p_cpmac_priv->set_to_close))
-+    {
-+        if(p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "StatsDump", "Get",
-+ 			                 p_local_mib) != 0)
-+        {
-+            errPrint("The stats dump for %s is failing.\n", p_dev->name);
-+            return(ret_val);
-+        }
-+
-+        p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "StatsClear", "Set", NULL);
-+
-+        dev_mib_elem_count = sizeof(CPMAC_DEVICE_MIB_T)/sizeof(unsigned long);
-+
-+        /* Update the history of the stats. This takes care of any reset of the 
-+         * device and stats that might have taken place during the life time of 
-+         * the driver. 
-+         */
-+        while(dev_mib_elem_count--)
-+        {
-+            *((unsigned long*) p_device_mib + dev_mib_elem_count) += 
-+            *((unsigned long*) p_local_mib  + dev_mib_elem_count); 
-+        }
-+    }
-+
-+    /* RFC2665, section 3.2.7, page 9 */
-+    rx_hal_errors          = p_device_mib->ifInFragments       +
-+	                     p_device_mib->ifInCRCErrors       +
-+	                     p_device_mib->ifInAlignCodeErrors +
-+	                     p_device_mib->ifInJabberFrames;
-+
-+    /* RFC2233 */
-+    rx_hal_discards        = p_device_mib->ifRxDMAOverruns;
-+
-+    /* RFC2665, section 3.2.7, page 9 */
-+    tx_hal_errors          = p_device_mib->ifExcessiveCollisionFrames +
-+                             p_device_mib->ifLateCollisions           +
-+                             p_device_mib->ifCarrierSenseErrors       +
-+                             p_device_mib->ifOutUnderrun;
-+
-+    /* if not set, the short frames (< 64 bytes) are considered as errors */
-+    if(!p_cpmac_priv->flags & IFF_PRIV_SHORT_FRAMES)
-+        rx_hal_errors += p_device_mib->ifInUndersizedFrames;
-+
-+    /* if not set, the long frames ( > 1518) are considered as errors 
-+     * RFC2665, section 3.2.7, page 9. */
-+    if(!p_cpmac_priv->flags & IFF_PRIV_JUMBO_FRAMES)
-+        rx_hal_errors += p_device_mib->ifInOversizedFrames;
-+
-+    /* if not in promiscous, then non addr matching frames are discarded */
-+    /* CPMAC 2.0 Manual Section 2.8.1.14 */
-+    if(!p_dev->flags & IFF_PROMISC)
-+    {
-+        ifInDiscards  +=  p_device_mib->ifInFilteredFrames;
-+    }
-+
-+     /* total rx discards = hal discards + driver discards. */
-+    ifInDiscards  = rx_hal_discards + p_net_dev_stats->rx_dropped;
-+    ifInErrors    = rx_hal_errors;
-+
-+    ifOutErrors   = tx_hal_errors;
-+    ifOutDiscards = p_net_dev_stats->tx_dropped;
-+
-+    /* Let us update the net device stats struct. To be updated in the later releases.*/
-+    p_cpmac_priv->net_dev_stats.rx_errors  = ifInErrors;
-+    p_cpmac_priv->net_dev_stats.collisions = p_device_mib->ifCollisionFrames;
-+
-+    if(buf == NULL || limit == 0)
-+    {
-+        return(0);
-+    }
-+
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %ld\n", "ifSpeed",                                 (long)p_cpmac_priv->link_speed);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "dot3StatsDuplexStatus",                   (long)p_cpmac_priv->link_mode);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifAdminStatus",                           (long)(p_dev->flags & IFF_UP ? 1:2));
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOperStatus",                            (long)(((p_dev->flags & IFF_UP) && netif_carrier_ok(p_dev)) ? 1:2));
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifLastChange",                            p_stats->start_tick);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInDiscards",                            ifInDiscards);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInErrors",                              ifInErrors);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutDiscards",                           ifOutDiscards);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutErrors",                             ifOutErrors);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInGoodFrames",                          p_device_mib->ifInGoodFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInBroadcasts",                          p_device_mib->ifInBroadcasts);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInMulticasts",                          p_device_mib->ifInMulticasts);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInPauseFrames",                         p_device_mib->ifInPauseFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInCRCErrors",                           p_device_mib->ifInCRCErrors);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInAlignCodeErrors",                     p_device_mib->ifInAlignCodeErrors);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInOversizedFrames",                     p_device_mib->ifInOversizedFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInJabberFrames",                        p_device_mib->ifInJabberFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInUndersizedFrames",                    p_device_mib->ifInUndersizedFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInFragments",                           p_device_mib->ifInFragments);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInFilteredFrames",                      p_device_mib->ifInFilteredFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInQosFilteredFrames",                   p_device_mib->ifInQosFilteredFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInOctets",                              p_device_mib->ifInOctets);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutGoodFrames",                         p_device_mib->ifOutGoodFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutBroadcasts",                         p_device_mib->ifOutBroadcasts);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutMulticasts",                         p_device_mib->ifOutMulticasts);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutPauseFrames",                        p_device_mib->ifOutPauseFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifDeferredTransmissions",                 p_device_mib->ifDeferredTransmissions);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifCollisionFrames",                       p_device_mib->ifCollisionFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifSingleCollisionFrames",                 p_device_mib->ifSingleCollisionFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifMultipleCollisionFrames",               p_device_mib->ifMultipleCollisionFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifExcessiveCollisionFrames",              p_device_mib->ifExcessiveCollisionFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifLateCollisions",                        p_device_mib->ifLateCollisions);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutUnderrun",                           p_device_mib->ifOutUnderrun);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifCarrierSenseErrors",                    p_device_mib->ifCarrierSenseErrors);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutOctets",                             p_device_mib->ifOutOctets);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "if64OctetFrames",                         p_device_mib->if64OctetFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "if65To127POctetFrames",                   p_device_mib->if65To127OctetFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "if128To255OctetFrames",                   p_device_mib->if128To255OctetFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "if256To511OctetFrames",                   p_device_mib->if256To511OctetFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "if512To1023OctetFrames",                  p_device_mib->if512To1023OctetFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "if1024ToUpOctetFrames",                   p_device_mib->if1024ToUPOctetFrames);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifNetOctets",                             p_device_mib->ifNetOctets);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifRxSofOverruns",                         p_device_mib->ifRxSofOverruns);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifRxMofOverruns",                         p_device_mib->ifRxMofOverruns);
-+    if(len <= limit)
-+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifRxDMAOverruns",                         p_device_mib->ifRxDMAOverruns);
-+
-+    *p_len = len;
-+
-+    return(0);
-+}
-+
-+
-+static int cpmac_p_read_rfc2665_stats(char* buf, char **start, off_t offset, 
-+		               int count, int *eof, void *data)
-+{
-+    int limit = count - 80;
-+    int len   = 0;
-+    struct net_device *p_dev = (struct net_device*)data;
-+
-+    cpmac_p_update_statistics(p_dev, buf, limit, &len);
-+
-+    *eof = 1;
-+
-+    return len;
-+}
-+
-+static int cpmac_p_read_link(char *buf, char **start, off_t offset, int count, 
-+                             int *eof, void *data)
-+{
-+    int len = 0;
-+
-+    struct net_device    *p_dev;
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv;
-+    struct net_device    *cpmac_dev_list[cpmac_devices_installed];
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal;
-+
-+    int                  i;
-+    int                  phy;            /* what phy are we using? */
-+
-+    len += sprintf(buf+len, "CPMAC devices = %d\n",cpmac_devices_installed);
-+
-+    p_dev        = last_cpmac_device;
-+
-+    /* Reverse the the device link list to list eth0,eth1...in correct order */
-+    for(i=0; i< cpmac_devices_installed; i++)
-+    {
-+        cpmac_dev_list[cpmac_devices_installed -(i+1)] = p_dev;
-+        p_cpmac_priv = p_dev->priv;
-+        p_dev = p_cpmac_priv->next_device;
-+    }
-+
-+    for(i=0; i< cpmac_devices_installed; i++)
-+    {
-+        p_dev        = cpmac_dev_list[i];
-+        p_cpmac_priv = p_dev->priv;
-+        p_drv_hal    = p_cpmac_priv->drv_hal;
-+
-+        /*  This prints them out from high to low because of how the devices are linked */
-+        if(netif_carrier_ok(p_dev))
-+        {
-+            p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "PhyNum", "Get", &phy);
-+
-+
-+            len += sprintf(buf+len,"eth%d: Link State: %s    Phy:0x%x, Speed = %s, Duplex = %s\n",
-+                           p_cpmac_priv->instance_num, "UP", phy, 
-+                           (p_cpmac_priv->link_speed == 100000000) ? "100":"10",
-+                           (p_cpmac_priv->link_mode  == 2) ? "Half":"Full");
-+
-+        }
-+        else
-+            len += sprintf(buf+len,"eth%d: Link State: DOWN\n",p_cpmac_priv->instance_num);
-+
-+        p_dev = p_cpmac_priv->next_device;
-+    }
-+
-+    return len;
-+
-+}
-+
-+static int cpmac_p_read_stats(char* buf, char **start, off_t offset, int count,
-+                              int *eof, void *data)
-+{
-+    struct net_device *p_dev = last_cpmac_device;
-+    int                len   = 0;
-+    int                limit = count - 80;
-+    int i;
-+    struct net_device     *cpmac_dev_list[cpmac_devices_installed];
-+    CPMAC_PRIVATE_INFO_T  *p_cpmac_priv;
-+    CPMAC_DEVICE_MIB_T    *p_device_mib;
-+
-+    /* Reverse the the device link list to list eth0,eth1...in correct order */
-+    for(i=0; i< cpmac_devices_installed; i++)
-+    {
-+        cpmac_dev_list[cpmac_devices_installed - (i+1)] = p_dev;
-+        p_cpmac_priv = p_dev->priv;
-+        p_dev = p_cpmac_priv->next_device;
-+    }
-+
-+    for(i=0; i< cpmac_devices_installed; i++)
-+    {
-+        p_dev = cpmac_dev_list[i];
-+
-+        if(!p_dev)
-+          goto proc_error;
-+
-+        /* Get Stats */
-+        cpmac_p_update_statistics(p_dev, NULL, 0, NULL);
-+
-+        p_cpmac_priv = p_dev->priv;
-+        p_device_mib = p_cpmac_priv->device_mib;
-+
-+        /* Transmit stats */
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "\nCpmac %d, Address %lx\n",i+1, p_dev->base_addr);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, " Transmit Stats\n");
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Tx Valid Bytes Sent        :%lu\n",p_device_mib->ifOutOctets);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Good Tx Frames (Hardware)  :%lu\n",p_device_mib->ifOutGoodFrames);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Good Tx Frames (Software)  :%lu\n",p_cpmac_priv->net_dev_stats.tx_packets);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Good Tx Broadcast Frames   :%lu\n",p_device_mib->ifOutBroadcasts);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Good Tx Multicast Frames   :%lu\n",p_device_mib->ifOutMulticasts);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Pause Frames Sent          :%lu\n",p_device_mib->ifOutPauseFrames);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Collisions                 :%lu\n",p_device_mib->ifCollisionFrames);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Tx Error Frames            :%lu\n",p_cpmac_priv->net_dev_stats.tx_errors);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Carrier Sense Errors       :%lu\n",p_device_mib->ifCarrierSenseErrors);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "\n");
-+
-+
-+        /* Receive Stats */
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "\nCpmac %d, Address %lx\n",i+1,p_dev->base_addr);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, " Receive Stats\n");
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Rx Valid Bytes Received    :%lu\n",p_device_mib->ifInOctets);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Good Rx Frames (Hardware)  :%lu\n",p_device_mib->ifInGoodFrames);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Good Rx Frames (Software)  :%lu\n",p_cpmac_priv->net_dev_stats.rx_packets);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Good Rx Broadcast Frames   :%lu\n",p_device_mib->ifInBroadcasts);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Good Rx Multicast Frames   :%lu\n",p_device_mib->ifInMulticasts);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Pause Frames Received      :%lu\n",p_device_mib->ifInPauseFrames);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Rx CRC Errors              :%lu\n",p_device_mib->ifInCRCErrors);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Rx Align/Code Errors       :%lu\n",p_device_mib->ifInAlignCodeErrors);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Rx Jabbers                 :%lu\n",p_device_mib->ifInOversizedFrames);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Rx Filtered Frames         :%lu\n",p_device_mib->ifInFilteredFrames);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Rx Fragments               :%lu\n",p_device_mib->ifInFragments);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Rx Undersized Frames       :%lu\n",p_device_mib->ifInUndersizedFrames);
-+        if(len<=limit)
-+          len+= sprintf(buf+len, "   Rx Overruns                :%lu\n",p_device_mib->ifRxDMAOverruns);
-+    }
-+
-+
-+    return len;
-+
-+ proc_error:
-+    *eof=1;
-+    return len;
-+}
-+
-+static int cpmac_p_write_stats (struct file *fp, const char * buf, unsigned long count, void * data)
-+{
-+	char local_buf[31];
-+        int  ret_val = 0;
-+
-+	if(count > 30)
-+	{
-+		printk("Error : Buffer Overflow\n");
-+		printk("Use \"echo 0 > cpmac_stat\" to reset the statistics\n");
-+		return -EFAULT;
-+	}
-+
-+	copy_from_user(local_buf,buf,count);
-+	local_buf[count-1]='\0'; /* Ignoring last \n char */
-+        ret_val = count;
-+	
-+	if(strcmp("0",local_buf)==0)
-+	{
-+            struct net_device *p_dev = last_cpmac_device;
-+            int i;
-+            struct net_device     *cpmac_dev_list[cpmac_devices_installed];
-+            CPMAC_PRIVATE_INFO_T  *p_cpmac_priv;
-+
-+            /* Valid command */
-+	    printk("Resetting statistics for CPMAC interface.\n");
-+
-+            /* Reverse the the device link list to list eth0,eth1...in correct order */
-+            for(i=0; i< cpmac_devices_installed; i++)
-+            {
-+                cpmac_dev_list[cpmac_devices_installed - (i+1)] = p_dev;
-+                p_cpmac_priv = p_dev->priv;
-+                p_dev = p_cpmac_priv->next_device;
-+            }
-+
-+            for(i=0; i< cpmac_devices_installed; i++)
-+             {
-+                p_dev = cpmac_dev_list[i];
-+                if(!p_dev)
-+                {
-+                    ret_val = -EFAULT;
-+                    break;
-+                }
-+
-+                cpmac_p_reset_statistics(p_dev);
-+            }
-+	}
-+	else
-+	{
-+		printk("Error: Unknown operation on cpmac statistics\n");
-+		printk("Use \"echo 0 > cpmac_stats\" to reset the statistics\n");
-+		return -EFAULT;
-+	}
-+	
-+	return ret_val;
-+}
-+
-+static int cpmac_p_reset_statistics(struct net_device *p_dev)
-+{
-+    int                       ret_val  = 0;
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
-+
-+    memset(p_cpmac_priv->device_mib, 0, sizeof(CPMAC_DEVICE_MIB_T));
-+    memset(p_cpmac_priv->stats, 0, sizeof(CPMAC_DRV_STATS_T));
-+    memset(&p_cpmac_priv->net_dev_stats, 0, sizeof(struct net_device_stats));
-+
-+    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "StatsClear", "Set", NULL);
-+
-+    return(ret_val);
-+}
-+
-+static int cpmac_p_get_version(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+    int  len                           = 0;
-+    int  limit                         = count - 80;
-+    char *hal_version                  = NULL;
-+    struct net_device *p_dev           = last_cpmac_device;
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
-+
-+    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "Version", "Get", &hal_version);
-+
-+    len += sprintf(buf+len, "Texas Instruments CPMAC driver version: %s\n", cpmac_version);
-+
-+    if(len <= limit && hal_version)
-+        len += sprintf(buf+len, "Texas Instruments CPMAC HAL version: %s\n", hal_version);
-+
-+    return len;
-+}
-+
-+static struct net_device_stats *cpmac_dev_get_net_stats (struct net_device *p_dev)
-+{
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = (CPMAC_PRIVATE_INFO_T *) p_dev->priv;
-+
-+    cpmac_p_update_statistics(p_dev, NULL, 0, NULL);
-+
-+    return &p_cpmac_priv->net_dev_stats;
-+}
-+
-+static int cpmac_p_detect_manual_cfg(int link_speed, char* link_mode, int debug)
-+{
-+    char *pSpeed = NULL;
-+
-+    if(debug == 1)
-+    {
-+        cpmac_debug_mode = 1;
-+        dbgPrint("Enabled the debug print.\n");
-+    }
-+
-+    if(!link_speed && !link_mode)
-+    {
-+        dbgPrint("No manual link params, defaulting to auto negotiation.\n");
-+        return (0);
-+    }
-+
-+    if(!link_speed || (link_speed != 10 && link_speed != 100))
-+    {
-+        dbgPrint("Invalid or No value of link speed specified, defaulting to auto speed.\n");
-+        pSpeed = "auto";
-+    }
-+    else if(link_speed == 10)
-+    {
-+        g_cfg_start_link_params &= ~(_CPMDIO_100);
-+        pSpeed = "10 Mbps";
-+    }
-+    else
-+    {
-+	g_cfg_start_link_params &= ~(_CPMDIO_10);
-+        pSpeed = "100 Mbps";
-+    }
-+
-+    if(!link_mode || (!strcmp(link_mode, "fd") && !strcmp(link_mode, "hd")))
-+    {
-+        dbgPrint("Invalid or No value of link mode specified, defaulting to auto mode.\n");
-+    }
-+    else if(!strcmp(link_mode, "hd"))
-+    {
-+        g_cfg_start_link_params &= ~(_CPMDIO_FD);
-+    }
-+    else
-+    {
-+        g_cfg_start_link_params &= ~(_CPMDIO_HD);
-+    }
-+
-+    dbgPrint("Link is manually set to the speed of %s speed and %s mode.\n", 
-+              pSpeed, link_mode ? link_mode : "auto");
-+
-+    return(0);
-+}
-+
-+//------------------------------------------------------------------------------
-+// Call back from the HAL.
-+//------------------------------------------------------------------------------
-+static int cpmac_p_process_status_ind(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
-+{
-+    struct net_device    *p_dev        = p_cpmac_priv->owner;
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
-+    int status;
-+
-+    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "Status", "Get", &status);
-+
-+    /* We do not reflect the real link status if in loopback.
-+     * After all, we want the packets to reach the hardware so
-+     * that Send() should work. */
-+    if(p_dev->flags & IFF_LOOPBACK)
-+    {
-+        dbgPrint("Maintaining the link up loopback for %s.\n", p_dev->name);
-+	netif_carrier_on(p_dev);
-+
-+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
-+//        avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_ON);
-+//#endif
-+
-+        return(0);
-+    }
-+
-+    if(status & CPMAC_STATUS_ADAPTER_CHECK) /* ???? */
-+    {
-+        ; /* what to do ? */
-+    }    
-+    else if(status)
-+    {
-+        if(!netif_carrier_ok(p_dev))
-+	{
-+            netif_carrier_on(p_cpmac_priv->owner);
-+
-+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
-+//            avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_ON);
-+//#endif
-+	    dbgPrint("Found the Link for the CPMAC instance %s.\n", p_dev->name);
-+        }
-+
-+        if(netif_running(p_dev) & netif_queue_stopped(p_dev))
-+        {
-+            netif_wake_queue(p_dev);
-+        }
-+
-+	p_cpmac_priv->link_speed = status & CPMAC_STATUS_LINK_SPEED ? 100000000:10000000;
-+	p_cpmac_priv->link_mode  = status & CPMAC_STATUS_LINK_DUPLEX? 3:2;
-+
-+    }
-+    else
-+    {
-+        if(netif_carrier_ok(p_dev))
-+	{
-+	    /* do we need to register synchronization issues with stats here. */
-+	    p_cpmac_priv->link_speed        = 100000000;
-+	    p_cpmac_priv->link_mode         = 1;
-+
-+	    netif_carrier_off(p_dev);
-+
-+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
-+//            avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_OFF);
-+//#endif
-+
-+	    dbgPrint("Lost the Link for the CPMAC for %s.\n", p_dev->name);
-+	}
-+
-+        if(!netif_queue_stopped(p_dev))
-+        {
-+            netif_stop_queue(p_dev);     /* So that kernel does not keep on xmiting pkts. */
-+        }
-+    }
-+
-+    return(0);
-+}
-+
-+//-----------------------------------------------------------------------------
-+// Timer related private functions.
-+//-----------------------------------------------------------------------------
-+static int cpmac_p_timer_init(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
-+{
-+    struct timer_list *p_timer = p_cpmac_priv->timer;
-+
-+    init_timer(p_timer);
-+    
-+    p_timer                    = p_cpmac_priv->timer + TICK_TIMER;
-+    p_timer->expires           = 0;
-+    p_timer->data              = (unsigned long)p_cpmac_priv;
-+    p_timer->function          = cpmac_p_tick_timer_expiry;
-+
-+    return(0);
-+}
-+
-+#if 0
-+static int cpmac_timer_cleanup(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
-+{
-+    struct timer_list *p_timer;
-+
-+    p_timer = p_cpmac_priv->timer + TICK_TIMER;
-+   
-+    /* use spin lock to establish synchronization with the dispatch */
-+    if(p_timer->function) del_timer_sync(p_timer);
-+    p_timer->function = NULL;
-+
-+    return (0);
-+}
-+#endif
-+
-+static int cpmac_p_start_timer(struct timer_list *p_timer, unsigned int delay_ticks)
-+{
-+    p_timer->expires        = jiffies + delay_ticks;
-+
-+    if(p_timer->function)
-+    {
-+        add_timer(p_timer);
-+    }
-+
-+    return(0);
-+} 
-+
-+static void cpmac_p_tick_timer_expiry(unsigned long p_cb_param)
-+{
-+    CPMAC_PRIVATE_INFO_T   *p_cpmac_priv = (CPMAC_PRIVATE_INFO_T*) p_cb_param;
-+    CPMAC_DRV_HAL_INFO_T   *p_drv_hal    = p_cpmac_priv->drv_hal; 
-+    struct timer_list       *p_timer     = p_cpmac_priv->timer + TICK_TIMER;
-+
-+    if(test_bit(0, &p_cpmac_priv->set_to_close))
-+    {
-+        return;
-+    }
-+
-+    p_drv_hal->hal_funcs->Tick(p_drv_hal->hal_dev);
-+  
-+    cpmac_p_start_timer(p_timer, p_cpmac_priv->delay_ticks);
-+}
-+
-+static int cpmac_p_stop_timer(struct timer_list *p_timer)
-+{
-+    /* Ideally we need to a set flag indicating not to start the timer again
-+       before del_timer_sync() is called up. But here we assume that the 
-+       caller has set the p_cpmac_priv->set_to_close (ok for now). */
-+    del_timer_sync(p_timer);
-+    
-+    return(0);
-+}
-+
-+//------------------------------------------------------------------------------
-+// Device configuration and setup related private functions.
-+//------------------------------------------------------------------------------
-+static int cpmac_p_probe_and_setup_device(CPMAC_PRIVATE_INFO_T *p_cpmac_priv, 
-+		                          unsigned long *p_dev_flags)
-+{
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal   = p_cpmac_priv->drv_hal;
-+    HAL_FUNCTIONS        *p_hal_funcs = p_drv_hal->hal_funcs;
-+    HAL_DEVICE           *p_hal_dev   = p_drv_hal->hal_dev;
-+    CPMAC_ABILITY_INFO_T *p_capability= p_cpmac_priv->ability_info;
-+    unsigned int         val          = 0;
-+    int                  channel      = 0;
-+
-+    p_cpmac_priv->flags                  = 0;
-+
-+    p_capability->promiscous             = CFG_PROMISCOUS;
-+    p_capability->broadcast              = CFG_BROADCAST;
-+    p_capability->multicast              = CFG_MULTICAST;
-+    p_capability->all_multi              = CFG_ALL_MULTI;
-+    p_capability->jumbo_frames           = CFG_JUMBO_FRAMES;
-+    p_capability->short_frames           = CFG_SHORT_FRAMES;
-+    p_capability->auto_negotiation       = CFG_AUTO_NEGOTIATION;
-+    p_capability->link_speed             = cfg_start_link_speed;
-+    p_capability->loop_back              = CFG_LOOP_BACK;
-+    p_capability->tx_flow_control        = CFG_TX_FLOW_CNTL;
-+    p_capability->rx_flow_control        = CFG_RX_FLOW_CNTL;
-+    p_capability->tx_pacing              = CFG_TX_PACING;
-+    p_capability->rx_pass_crc            = CFG_RX_PASS_CRC;
-+    p_capability->qos_802_1q             = CFG_QOS_802_1Q;
-+    p_capability->tx_num_chan            = CFG_TX_NUM_CHAN;
-+
-+    /* Lets probe the device for the configured capabilities (netdev specific).*/ 
-+
-+    /* Following are set in the set_multi_list, when indicated by the kernel 
-+     * Promiscous and all multi.
-+     */
-+
-+    if(p_capability->broadcast)
-+    {
-+        channel = 0;
-+	val     = 1;
-+        if((p_hal_funcs->Control(p_hal_dev, pszRX_BROAD_EN, pszSet, &val) == 0) && 
-+           (p_hal_funcs->Control(p_hal_dev, pszRX_BROAD_CH, pszSet, &channel) == 0))
-+	    *p_dev_flags |= IFF_BROADCAST;
-+	else
-+	    p_capability->broadcast = 0; /* no broadcast capabilities */
-+    }
-+
-+    if(p_capability->multicast)
-+    {
-+        val     = 1;
-+	channel = 0;
-+	if((p_hal_funcs->Control(p_hal_dev, pszRX_MULT_EN, pszSet, &val) == 0) &&
-+	   (p_hal_funcs->Control(p_hal_dev, pszRX_MULT_CH, pszSet, &channel) == 0))
-+	    *p_dev_flags |= IFF_MULTICAST;
-+	else
-+	{
-+	    p_capability->multicast = 0; 
-+	    p_capability->all_multi = 0; /* no multicast, no all-multi. */
-+	}
-+    }
-+
-+    if(p_capability->loop_back)
-+    {
-+        ;  /* We do not put the device in loopback, if required use ioctl */
-+    }
-+    
-+    /* Lets probe the device for the configured capabilities (Non net device specific).*/
-+
-+    if(p_capability->jumbo_frames)
-+    {
-+	val = 0;
-+        if(p_hal_funcs->Control(p_hal_dev, pszRX_NO_CHAIN, pszSet, &val) == 0)
-+            p_cpmac_priv->flags |= IFF_PRIV_JUMBO_FRAMES;
-+	else
-+	    p_capability->jumbo_frames = 0;
-+    }
-+
-+    if(p_capability->short_frames)
-+    {
-+	val = 1;
-+        if(p_hal_funcs->Control(p_hal_dev, pszRX_CSF_EN, pszSet, &val) == 0)
-+            p_cpmac_priv->flags |= IFF_PRIV_SHORT_FRAMES;
-+	else
-+	    p_capability->short_frames = 0;
-+    }            
-+
-+    val = g_cfg_start_link_params;
-+
-+#ifdef CONFIG_AR7_MDIX
-+    if( avalanche_is_mdix_on_chip() )
-+    {
-+        val |= _CPMDIO_AUTOMDIX;
-+    }
-+#endif 
-+
-+    if(p_hal_funcs->Control(p_hal_dev,pszMdioConnect,pszSet, &val) !=0)
-+    {
-+        p_capability->link_speed = 0;
-+    }
-+    else
-+    {
-+	if(g_cfg_start_link_params & (_CPMDIO_100 | _CPMDIO_HD | _CPMDIO_FD | _CPMDIO_10))
-+            p_cpmac_priv->flags |= IFF_PRIV_AUTOSPEED;
-+	else if(g_cfg_start_link_params & (_CPMDIO_100 | _CPMDIO_HD))
-+	    p_cpmac_priv->flags |= IFF_PRIV_LINK100_HD;
-+	else if(g_cfg_start_link_params & (_CPMDIO_100 | _CPMDIO_FD))
-+	    p_cpmac_priv->flags |= IFF_PRIV_LINK100_FD;
-+	else if(g_cfg_start_link_params & (_CPMDIO_10 | _CPMDIO_HD))
-+	    p_cpmac_priv->flags |= IFF_PRIV_LINK10_HD;
-+	else if(g_cfg_start_link_params & (_CPMDIO_10 | _CPMDIO_FD))
-+	    p_cpmac_priv->flags |= IFF_PRIV_LINK10_FD;
-+	else
-+	    ;
-+    }
-+
-+    if(p_capability->tx_flow_control)
-+    {
-+	val = 1;
-+        if(p_hal_funcs->Control(p_hal_dev,pszTX_FLOW_EN, pszSet, &val) ==0)
-+            p_cpmac_priv->flags |= IFF_PRIV_TX_FLOW_CNTL;
-+	else
-+            p_capability->tx_flow_control = 0;
-+    }
-+
-+    if(p_capability->rx_flow_control)
-+    {
-+	val = 1;
-+        if(p_hal_funcs->Control(p_hal_dev, pszRX_FLOW_EN, pszSet, &val) ==0)
-+	    p_cpmac_priv->flags |= IFF_PRIV_RX_FLOW_CNTL;
-+	else
-+            p_capability->rx_flow_control = 0;
-+    }
-+
-+    if(p_capability->tx_pacing)
-+    {
-+	val = 1;
-+        if(p_hal_funcs->Control(p_hal_dev, pszTX_PACE, pszSet, &val) ==0)
-+            p_cpmac_priv->flags |= IFF_PRIV_TX_PACING;
-+	else
-+	    p_capability->tx_pacing = 0;
-+    }
-+
-+    if(p_capability->rx_pass_crc)
-+    {
-+	val = 1;
-+	if(p_hal_funcs->Control(p_hal_dev, pszRX_PASS_CRC, pszSet, &val) == 0)
-+	    p_cpmac_priv->flags |= IFF_PRIV_RX_PASS_CRC;
-+	else                                  
-+            p_capability->rx_pass_crc = 0;
-+    }
-+
-+    if(p_capability->qos_802_1q)
-+    {
-+	val  = 1;
-+        if(p_hal_funcs->Control(p_hal_dev, pszRX_QOS_EN, pszSet, &val) == 0)
-+            p_cpmac_priv->flags |= IFF_PRIV_8021Q_EN;
-+	else
-+	{
-+	    p_capability->qos_802_1q = 0;
-+	    p_capability->tx_num_chan= 1;
-+        }
-+    }
-+
-+    if(p_capability->tx_num_chan > 1)
-+    {
-+	int cfg_tx_num_chan = p_capability->tx_num_chan;
-+        val = 0;
-+#ifdef TEST
-+	if(p_hal_funcs->Control(p_hal_dev, pszTX_NUM_CH, pszGet, &val) == 0)
-+	    cfg_tx_num_chan = cfg_tx_num_chan > val ? val : cfg_tx_num_chan;
-+	else 
-+	    cfg_tx_num_chan = 1;
-+#endif
-+	p_capability->tx_num_chan = cfg_tx_num_chan;
-+    }
-+
-+    return(0);
-+}
-+
-+static int cpmac_p_setup_driver_params(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
-+{
-+   int i=0;
-+   int threshold = CFG_TX_NUM_BUF_SERVICE;
-+
-+   char *tx_threshold_ptr = prom_getenv("threshold");
-+   
-+    CPMAC_TX_CHAN_INFO_T *p_tx_chan_info = p_cpmac_priv->tx_chan_info;
-+    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info = p_cpmac_priv->rx_chan_info;
-+    CPMAC_ABILITY_INFO_T *p_capability   = p_cpmac_priv->ability_info;
-+
-+    /* Timer stuff */
-+    p_cpmac_priv->timer_count      = 1; /* should be < or = the MAX TIMER */
-+    p_cpmac_priv->timer_created    = 0;
-+    p_cpmac_priv->timer_access_hal = 1;
-+
-+    for(i=0; i < MAX_TIMER; i++)
-+        p_cpmac_priv->timer[i].function = NULL;
-+
-+    p_cpmac_priv->enable_802_1q  = p_capability->qos_802_1q;  
-+
-+    /* Tx channel related.*/
-+    p_tx_chan_info->cfg_chan     = p_capability->tx_num_chan;
-+    p_tx_chan_info->opened_chan  = 0;
-+    
-+    if(tx_threshold_ptr)
-+       threshold = simple_strtol(tx_threshold_ptr, (char **)NULL, 10);
-+    
-+    if((threshold <= 0) && tx_threshold_ptr) /* If threshold set to 0 then Enable the TX interrupt */
-+    {
-+       threshold  = CFG_TX_NUM_BUF_SERVICE;
-+       p_tx_chan_info->tx_int_disable = 0;
-+       
-+    }
-+    else
-+    {
-+       p_tx_chan_info->tx_int_disable = CFG_TX_INT_DISABLE;
-+    }
-+
-+    for(i=0; i < MAX_TX_CHAN; i++)
-+    {
-+       
-+
-+
-+       p_tx_chan_info->chan[i].state         = CHAN_CLOSE; 
-+       p_tx_chan_info->chan[i].num_BD        = CFG_TX_NUM_BUF_DESC;  
-+       p_tx_chan_info->chan[i].buffer_size   = cpmac_max_frame_size;
-+       p_tx_chan_info->chan[i].buffer_offset = CFG_TX_BUF_OFFSET;
-+
-+
-+
-+       p_tx_chan_info->chan[i].service_max   = threshold;
-+    }
-+    
-+    if (p_tx_chan_info->tx_int_disable)
-+       printk("Cpmac driver Disable TX complete interrupt setting threshold to %d.\n",threshold);
-+    else
-+       printk("Cpmac driver Enable TX complete interrupt\n");
-+
-+    
-+    /* Assuming just one rx channel for now */
-+    p_rx_chan_info->cfg_chan            = 1;
-+    p_rx_chan_info->opened_chan         = 0;
-+    p_rx_chan_info->chan->state         = CHAN_CLOSE;
-+    p_rx_chan_info->chan->num_BD        = CFG_RX_NUM_BUF_DESC;
-+    p_rx_chan_info->chan->buffer_size   = cpmac_max_frame_size;
-+    p_rx_chan_info->chan->buffer_offset = CFG_RX_BUF_OFFSET;
-+    p_rx_chan_info->chan->service_max   = CFG_RX_NUM_BUF_SERVICE;
-+
-+    /* Set as per RFC 2665 */
-+    p_cpmac_priv->link_speed     = 100000000; 
-+    p_cpmac_priv->link_mode      = 1;
-+
-+    p_cpmac_priv->loop_back      = 0;
-+
-+    return(0);
-+}
-+
-+inline static int cpmac_p_rx_buf_setup(CPMAC_RX_CHAN_INFO_T *p_rx_chan)
-+{
-+    /* Number of ethernet packets & max pkt length */
-+    p_rx_chan->chan->tot_buf_size  = p_rx_chan->chan->buffer_size   + 
-+                                     2*(CONTROL_802_1Q_SIZE)        +
-+	                             p_rx_chan->chan->buffer_offset +
-+                                     ADD_FOR_4BYTE_ALIGN(p_rx_chan->chan->buffer_offset & 0x3);
-+
-+    p_rx_chan->chan->tot_reserve_bytes = CONTROL_802_1Q_SIZE + 
-+                                         p_rx_chan->chan->buffer_offset +
-+	                                 L3_ALIGN(p_rx_chan->chan->buffer_offset & 0x3);
-+
-+    return(0);
-+}
-+
-+//-----------------------------------------------------------------------------
-+// Net device related private functions.
-+//-----------------------------------------------------------------------------
-+
-+/***************************************************************
-+ *	cpmac_dev_init
-+ *
-+ *	Returns:
-+ *		0 on success, error code otherwise.
-+ *	Parms:
-+ *		dev	The structure of the device to be
-+ *			init'ed.
-+ *
-+ *	This function completes the initialization of the
-+ *	device structure and driver.  It reserves the IO
-+ *	addresses and assignes the device's methods.
-+ *
-+ *	
-+ **************************************************************/
-+
-+static int cpmac_dev_init(struct net_device *p_dev)
-+{
-+    int retVal = -1;
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
-+    int instance_num                   = p_cpmac_priv->instance_num;
-+    unsigned long net_flags = 0;
-+    char *mac_name          = NULL;
-+    char *mac_string        = NULL;
-+
-+    CPMAC_TX_CHAN_INFO_T *p_tx_chan_info;
-+    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info;
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal;
-+    int i;
-+
-+    int mem_size =    sizeof(CPMAC_DRV_HAL_INFO_T)
-+		    + sizeof(CPMAC_TX_CHAN_INFO_T)
-+		    + sizeof(CPMAC_RX_CHAN_INFO_T)
-+		    + sizeof(CPMAC_ABILITY_INFO_T)
-+                    + sizeof(CPMAC_DEVICE_MIB_T)
-+                    + sizeof(CPMAC_DRV_STATS_T);
-+
-+
-+#if defined(CONFIG_MIPS_SEAD2)
-+    int prev_reset_val = RESET_REG_PRCR;
-+    /* Bring the module out of reset */
-+    RESET_REG_PRCR |= temp_reset_value[p_cpmac_priv->instance_num];     
-+
-+    /* Read the version id of the device to check if the device really exists */
-+    if( VERSION(temp_base_address[p_cpmac_priv->instance_num]) == 0)
-+    {
-+        printk(" CPMAC:Device not found\n");
-+	RESET_REG_PRCR = prev_reset_val;
-+        return -ENODEV;
-+    }
-+
-+    RESET_REG_PRCR = prev_reset_val;
-+#endif
-+
-+
-+    if((p_drv_hal = kmalloc(mem_size,  GFP_KERNEL)) == NULL)
-+    {
-+        errPrint("Failed to allocate memory; rewinding.\n");
-+        return(-1);
-+    }
-+
-+    memset(p_drv_hal, 0, mem_size);
-+
-+    /* build the cpmac private object */
-+    p_cpmac_priv->drv_hal       = p_drv_hal;
-+    p_cpmac_priv->tx_chan_info  = p_tx_chan_info
-+                                = (CPMAC_TX_CHAN_INFO_T*)((char*)p_drv_hal 
-+				  + sizeof(CPMAC_DRV_HAL_INFO_T));
-+    p_cpmac_priv->rx_chan_info  = p_rx_chan_info 
-+                                = (CPMAC_RX_CHAN_INFO_T*)((char *)p_tx_chan_info 
-+				  + sizeof(CPMAC_TX_CHAN_INFO_T));
-+    p_cpmac_priv->ability_info  = (CPMAC_ABILITY_INFO_T *)((char *)p_rx_chan_info 
-+		                  + sizeof(CPMAC_RX_CHAN_INFO_T));
-+    p_cpmac_priv->device_mib    = (CPMAC_DEVICE_MIB_T *)((char *)p_cpmac_priv->ability_info 
-+	                          + sizeof(CPMAC_ABILITY_INFO_T));
-+    p_cpmac_priv->stats         = (CPMAC_DRV_STATS_T *)((char *)p_cpmac_priv->device_mib   
-+		                  + sizeof(CPMAC_DEVICE_MIB_T));
-+
-+    p_drv_hal->owner            = p_cpmac_priv;
-+
-+
-+    switch(instance_num)
-+    {
-+
-+        case 0:
-+            mac_name="maca";
-+
-+            /* Also setting port information */
-+            p_dev->if_port =  AVALANCHE_CPMAC_LOW_PORT_ID;            
-+
-+            break;
-+
-+        case 1:
-+            mac_name="macb";
-+
-+            /* Also setting port information */
-+            p_dev->if_port =  AVALANCHE_CPMAC_HIGH_PORT_ID;            
-+
-+            break;
-+    }
-+
-+    if(mac_name)
-+        mac_string=prom_getenv(mac_name);
-+
-+    if(!mac_string)
-+    {
-+        mac_string="08.00.28.32.06.02";
-+        printk("Error getting mac from Boot enviroment for %s\n",p_dev->name);
-+        printk("Using default mac address: %s\n",mac_string);
-+        if(mac_name)
-+        {
-+            printk("Use Bootloader command:\n");
-+            printk("    setenv %s xx.xx.xx.xx.xx.xx\n","<env_name>");
-+            printk("to set mac address\n");
-+        }
-+    }
-+
-+    str2eaddr(p_cpmac_priv->mac_addr,mac_string);
-+
-+    for (i=0; i <= ETH_ALEN; i++)
-+    {
-+        /* This sets the hardware address */
-+	p_dev->dev_addr[i] = p_cpmac_priv->mac_addr[i]; 
-+    }
-+
-+    p_cpmac_priv->set_to_close          = 1;
-+    p_cpmac_priv->non_data_irq_expected = 0;
-+
-+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
-+//    if((p_cpmac_priv->led_handle = avalanche_led_register("cpmac", instance_num)) == NULL)
-+//   {
-+//        errPrint("Could not allocate handle for CPMAC[%d] LED.\n", instance_num);
-+//       goto cpmac_init_mod_error;
-+//    }
-+//#endif
-+
-+    if(cpmac_drv_init_module(p_drv_hal, p_dev, instance_num) != 0)
-+    {
-+        errPrint("Could not initialize the HAL for %s.\n", p_dev->name);
-+        goto cpmac_init_mod_error;
-+    } 
-+
-+    /* initialize the CPMAC device */
-+    if (cpmac_drv_init(p_drv_hal) == -1)
-+    {
-+	errPrint("HAL init failed for %s.\n", p_dev->name);
-+	goto cpmac_init_device_error;
-+    }
-+
-+    if(cpmac_p_probe_and_setup_device(p_cpmac_priv, &net_flags) == -1)
-+    {
-+        errPrint("Failed to configure up %s.\n", p_dev->name);
-+        goto cpmac_init_device_error;
-+    }
-+
-+    if(cpmac_p_setup_driver_params(p_cpmac_priv) == -1)
-+    {
-+        errPrint("Failed to set driver parameters for %s.\n", p_dev->name);
-+        goto cpmac_init_device_error;
-+    }
-+
-+    cpmac_p_rx_buf_setup(p_rx_chan_info);
-+
-+    /* initialize the timers for the net device */
-+    if(cpmac_p_timer_init(p_cpmac_priv) == -1)
-+    {
-+        errPrint("Failed to set timer(s) for %s.\n", p_dev->name);
-+        goto cpmac_timer_init_error;
-+    }
-+
-+    p_dev->addr_len           = 6;
-+
-+    p_dev->open               = &cpmac_dev_open;    /*  i.e. Start Device  */
-+    p_dev->hard_start_xmit    = &cpmac_dev_tx;
-+    p_dev->stop               = &cpmac_dev_close;
-+    p_dev->get_stats          = &cpmac_dev_get_net_stats;
-+
-+    p_dev->set_multicast_list = &cpmac_dev_mcast_set;
-+    p_dev->set_mac_address    = cpmac_dev_set_mac_addr;
-+    /* Knocking off the default broadcast and multicast flags. Allowing the 
-+       device configuration to control the flags. */
-+    p_dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST);
-+    p_dev->flags |= net_flags;
-+
-+    netif_carrier_off(p_dev);
-+
-+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
-+//    avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_OFF);
-+//#endif
-+
-+    /* Tasklet is initialized at the isr registeration time. */
-+    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "CpmacBase", "Get", &p_dev->base_addr);
-+    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "CpmacSize", "Get", &p_cpmac_priv->dev_size);
-+
-+    request_mem_region(p_dev->base_addr, p_cpmac_priv->dev_size, p_dev->name);
-+
-+    retVal = 0;
-+
-+    if(g_init_enable_flag)
-+        cpmac_p_dev_enable(p_dev);
-+
-+    return(retVal);
-+
-+cpmac_timer_init_error:
-+cpmac_init_device_error  :
-+    cpmac_drv_cleanup(p_drv_hal);
-+
-+cpmac_init_mod_error:
-+    kfree(p_drv_hal);
-+
-+    return (retVal);
-+
-+} /* cpmac_dev_init */
-+
-+
-+/***************************************************************
-+ *	cpmac_p_dev_enable
-+ *
-+ *	Returns:
-+ *		0 on success, error code otherwise.
-+ *	Parms:
-+ *		dev	Structure of device to be opened.
-+ *
-+ *	This routine puts the driver and CPMAC adapter in a
-+ *	state where it is ready to send and receive packets.
-+ *	
-+ *
-+ **************************************************************/
-+int cpmac_p_dev_enable( struct net_device *p_dev)
-+{
-+    int ret_val = 0;
-+    int channel = 0;
-+ 
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal      = p_cpmac_priv->drv_hal;
-+    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info = p_cpmac_priv->rx_chan_info;
-+    int max_length                       = p_rx_chan_info->chan->tot_buf_size;
-+
-+    p_cpmac_priv->set_to_close = 0;
-+
-+    if((ret_val = cpmac_drv_start(p_drv_hal, p_cpmac_priv->tx_chan_info, 
-+				  p_cpmac_priv->rx_chan_info, CHAN_SETUP))==-1)
-+    {
-+        errPrint("%s error: failed to start the device.\n", p_dev->name);
-+        ret_val = -1;
-+    }
-+    else if(p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev,"RX_UNICAST_SET",  
-+					  "Set", &channel)!=0)
-+    {
-+        errPrint("%s error: device chan 0 could not be enabled.\n", p_dev->name);	
-+	ret_val = -1;
-+    }
-+    else if(p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, pszRX_MAXLEN, pszSet, &max_length) != 0)
-+    {
-+        errPrint(" CPMAC registers can't be written \n");
-+        ret_val = -1;
-+    }
-+    else if(p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "TxIntDisable", "Set", 
-+            &p_cpmac_priv->tx_chan_info->tx_int_disable) != 0)
-+    {    
-+        errPrint(" CPMAC registers can't be written \n");
-+        ret_val = -1;
-+    }
-+    else
-+    {
-+        ; // Every thing went OK. 
-+    }
-+    
-+    return(ret_val);
-+} /* cpmac_dev_enable */
-+
-+
-+static int cpmac_dev_open(struct net_device *p_dev)
-+{
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
-+    CPMAC_ISR_INFO_T     *p_isr_cb_param = &p_cpmac_priv->cpmac_isr;
-+
-+    if(!g_init_enable_flag)
-+        cpmac_p_dev_enable(p_dev);
-+   
-+    if(request_irq(p_isr_cb_param->intr, cpmac_hal_isr, SA_INTERRUPT, 
-+                   "Cpmac Driver", p_isr_cb_param))
-+    {
-+        errPrint("Failed to register the irq %d for Cpmac %s.\n",
-+                  p_isr_cb_param->intr, p_dev->name); 
-+        return (-1);          
-+    }
-+    
-+    netif_start_queue(p_dev);
-+
-+    MOD_INC_USE_COUNT;
-+    p_cpmac_priv->stats->start_tick = jiffies;
-+    dbgPrint("Started the network queue for %s.\n", p_dev->name);    
-+    return(0);
-+}
-+
-+/***************************************************************
-+ *	cpmac_p_dev_disable
-+ *  
-+ * 	Returns:
-+ *		An error code.
-+ *	Parms:
-+ *		dev	The device structure of the device to
-+ *			close.
-+ *
-+ *	This function shuts down the adapter.  
-+ *
-+ **************************************************************/
-+int cpmac_p_dev_disable(struct net_device *p_dev)
-+{
-+    int ret_val = 0;
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
-+
-+    set_bit(0, &p_cpmac_priv->set_to_close);
-+    set_bit(0, &p_cpmac_priv->non_data_irq_expected);
-+   
-+    /* The driver does not re-schedule the tasklet after kill is called. So, this 
-+       should take care of the bug in the kernel. */
-+    tasklet_kill(&p_cpmac_priv->cpmac_isr.tasklet);
-+ 
-+    if(cpmac_drv_stop(p_drv_hal, p_cpmac_priv->tx_chan_info,
-+		      p_cpmac_priv->rx_chan_info, 
-+		      CHAN_TEARDOWN | FREE_BUFFER | BLOCKING | COMPLETE) == -1)
-+    {
-+        ret_val = -1;
-+    }
-+    else
-+    {
-+        /* hope that the HAL closes down the tick timer.*/
-+
-+        dbgPrint("Device %s Closed.\n", p_dev->name);
-+        p_cpmac_priv->stats->start_tick = jiffies;
-+
-+        p_cpmac_priv->link_speed        = 100000000;
-+        p_cpmac_priv->link_mode         = 1;
-+        netif_carrier_off(p_dev);
-+
-+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
-+//        avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_OFF);
-+//#endif
-+
-+        clear_bit(0, &p_cpmac_priv->non_data_irq_expected);
-+
-+    }
-+    
-+    return (ret_val);
-+
-+} /* cpmac_dev_close */
-+
-+
-+/***************************************************************
-+ *	cpmac_dev_close
-+ *  
-+ * 	Returns:
-+ *		An error code.
-+ *	Parms:
-+ *		dev	The device structure of the device to
-+ *			close.
-+ *
-+ *	This function shuts down the adapter.  
-+ *
-+ **************************************************************/
-+static int cpmac_dev_close(struct net_device *p_dev)
-+{
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
-+    CPMAC_ISR_INFO_T     *p_isr_cb_param = &p_cpmac_priv->cpmac_isr;
-+
-+    /* inform the upper layers. */
-+    netif_stop_queue(p_dev);
-+
-+    if(!g_init_enable_flag)
-+        cpmac_p_dev_disable(p_dev);
-+    else
-+        free_irq(p_isr_cb_param->intr, p_isr_cb_param);
-+
-+    MOD_DEC_USE_COUNT;
-+
-+    return(0);
-+}
-+
-+static void cpmac_dev_mcast_set(struct net_device *p_dev)
-+{
-+    CPMAC_PRIVATE_INFO_T    *p_cpmac_priv = p_dev->priv;
-+    CPMAC_DRV_HAL_INFO_T    *p_drv_hal    = p_cpmac_priv->drv_hal;
-+    CPMAC_ABILITY_INFO_T    *p_capability = p_cpmac_priv->ability_info;
-+    HAL_FUNCTIONS           *p_hal_funcs  = p_drv_hal->hal_funcs;
-+    HAL_DEVICE              *p_hal_dev    = p_drv_hal->hal_dev;
-+    int                     val           = 1;
-+    int                     channel       = 0;
-+
-+//#if defined (CONFIG_MIPS_AVALANCHE_LED)    
-+//    if(netif_carrier_ok(p_dev))
-+//      avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_ON);
-+//#endif
-+
-+    if(p_dev->flags & IFF_PROMISC)
-+    {
-+        if(p_capability->promiscous)
-+        {       
-+            /* multi mode in the HAL, check this */
-+	    val = 0;
-+	    p_hal_funcs->Control(p_hal_dev, pszRX_MULTI_ALL, "Clear", &val);
-+
-+	    val = 1;
-+            /* set the promiscous mode in the HAL */
-+            p_hal_funcs->Control(p_hal_dev, pszRX_CAF_EN, pszSet, &val);
-+            p_hal_funcs->Control(p_hal_dev, pszRX_PROM_CH, pszSet, &channel);
-+
-+       	    dbgPrint("%s set in the Promisc mode.\n", p_dev->name);	
-+	}
-+        else
-+        {
-+	    errPrint("%s not configured for Promisc mode.\n", p_dev->name);
-+        }
-+    }
-+    else if(p_dev->flags & IFF_ALLMULTI)
-+    {
-+        if(p_capability->all_multi)
-+        {	
-+	    val = 0;
-+	    /* disable the promiscous mode in the HAL */
-+	    p_hal_funcs->Control(p_hal_dev, pszRX_CAF_EN, "Clear", &val);
-+
-+	    val = 1;
-+            /* set the all multi mode in the HAL */
-+	    p_hal_funcs->Control(p_hal_dev, pszRX_MULTI_ALL, pszSet, &val);
-+	    p_hal_funcs->Control(p_hal_dev, pszRX_MULT_CH, pszSet, &channel);
-+
-+            dbgPrint("%s has been set to the ALL_MULTI mode.\n", p_dev->name);
-+        }
-+        else
-+        {
-+	    errPrint("%s not configured for ALL MULTI mode.\n", p_dev->name);
-+        }
-+    }
-+    else if(p_dev->mc_count)
-+    {
-+        if(p_capability->multicast)
-+        {
-+	    struct dev_mc_list *p_dmi = p_dev->mc_list;
-+            int    count;
-+
-+            val = 0;
-+            /* clear all the previous data, we are going to populate new ones.*/
-+	    p_hal_funcs->Control(p_hal_dev, pszRX_MULTI_ALL, "Clear", &val);
-+	    /* disable the promiscous mode in the HAL */
-+	    p_hal_funcs->Control(p_hal_dev, pszRX_CAF_EN, pszSet, &val);
-+
-+	    for(count = 0; count < p_dev->mc_count; count++, p_dmi = p_dmi->next)
-+	    {
-+               p_hal_funcs->Control(p_hal_dev, "RX_MULTI_SINGLE", "Set", p_dmi->dmi_addr); 
-+	    }
-+
-+            dbgPrint("%s configured for %d multicast addresses.\n", p_dev->name, p_dev->mc_count);
-+        }
-+        else
-+        {
-+	    errPrint("%s has not been configuted for multicast handling.\n", p_dev->name);
-+        }
-+    }
-+    else
-+    {
-+       val = 0;
-+       /* clear all the previous data, we are going to populate new ones.*/
-+       p_hal_funcs->Control(p_hal_dev, pszRX_MULTI_ALL, "Clear", &val);
-+       /* disable the promiscous mode in the HAL */
-+       p_hal_funcs->Control(p_hal_dev, pszRX_CAF_EN, pszSet, &val);
-+       dbgPrint("Dev set to  Unicast mode.\n");
-+    }
-+}
-+
-+static int cpmac_dev_set_mac_addr(struct net_device *p_dev,void * addr)
-+{
-+    CPMAC_PRIVATE_INFO_T    *p_cpmac_priv = p_dev->priv;
-+    CPMAC_DRV_HAL_INFO_T    *p_drv_hal    = p_cpmac_priv->drv_hal;
-+    HAL_FUNCTIONS           *p_hal_funcs  = p_drv_hal->hal_funcs;
-+    HAL_DEVICE              *p_hal_dev    = p_drv_hal->hal_dev;
-+    struct sockaddr *sa = addr;
-+
-+   memcpy(p_cpmac_priv->mac_addr,sa->sa_data,p_dev->addr_len);
-+   memcpy(p_dev->dev_addr,sa->sa_data,p_dev->addr_len);
-+   p_hal_funcs->Control(p_hal_dev, pszMacAddr, pszSet, p_cpmac_priv->mac_addr);   
-+
-+	return 0;
-+
-+}
-+
-+/* VLAN is handled by vlan/vconfig support. Here, we just check for the 
-+ * 802.1q configuration of the device and en-queue the packet accordingly.
-+ * We do not do any 802.1q processing here.
-+ */
-+static int cpmac_dev_tx( struct sk_buff *skb, struct net_device *p_dev)
-+{
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv  = p_dev->priv;
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal     = p_cpmac_priv->drv_hal;
-+    int channel                         = 0;
-+    int ret_val                         = 0;
-+    FRAGLIST             send_frag_list[1];
-+
-+#ifdef CPMAC_8021Q_SUPPORT
-+    if(skb->len < TCI_END_OFFSET)
-+    {
-+        /* Whee, frame shorter than 14 bytes !! We need to copy 
-+	 * fragments to understand the frame. Too much work. 
-+	 * Hmm, dump it. */
-+
-+        /* Free the buffer */
-+	goto cpmac_dev_tx_drop_pkt;
-+    }
-+
-+    /* 802.1p/q stuff */
-+    if(IS_802_1Q_FRAME(skb->data + TPID_START_OFFSET)) 
-+    {
-+        /* IEEE 802.1q, section 8.8 and section 8.11.9 */
-+        if(!p_cpmac_priv->enable_802_1q) 
-+        {
-+           /* free the buffer */
-+           goto cpmac_dev_tx_drop_pkt;
-+        }		
-+
-+        channel = GET_802_1P_CHAN(p_cpmac_priv->tx_chan_info->opened_chan,
-+              		          skb->data[TCI_START_OFFSET]);
-+
-+    }
-+    /* sending a non 802.1q frame, when configured for 802.1q: dump it.*/
-+    else if(p_cpmac_priv->enable_802_1q)
-+    {
-+         /* free the buffer */
-+	 goto cpmac_dev_tx_drop_pkt;
-+    }
-+    else
-+    {
-+        ;/* it is the good old non 802.1q */
-+    }
-+#endif
-+
-+    send_frag_list->len  = skb->len;
-+    send_frag_list->data = skb->data;
-+
-+#ifdef CPMAC_TEST
-+    xdump(skb->data, skb->len, "send");
-+#endif
-+
-+    dma_cache_wback_inv((unsigned long)skb->data, skb->len);    
-+
-+    if(p_drv_hal->hal_funcs->Send(p_drv_hal->hal_dev, send_frag_list, 1, 
-+			          skb->len, skb, channel) != 0)
-+    {
-+	/* code here to stop the queue, when allowing tx timeout, perhaps next release.*/
-+        p_cpmac_priv->net_dev_stats.tx_errors++;  
-+#ifndef TI_SLOW_PATH
-+       /* Free the skb in case of Send return error */
-+        dev_kfree_skb_any(skb);
-+        p_cpmac_priv->net_dev_stats.tx_dropped++;
-+        return 0;
-+#endif
-+        goto cpmac_dev_tx_drop_pkt; 
-+    }
-+
-+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
-+//    avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_TX_ACTIVITY);
-+//#endif
-+
-+    return(ret_val);
-+
-+cpmac_dev_tx_drop_pkt:
-+
-+    p_cpmac_priv->net_dev_stats.tx_dropped++;
-+    ret_val = -1;
-+    return (ret_val);
-+
-+} /*cpmac_dev_tx */
-+
-+
-+//------------------------------------------------------------------------------
-+// Public functions : Called by outsiders to this file.
-+//------------------------------------------------------------------------------
-+
-+
-+void *cpmac_hal_malloc_buffer(unsigned int size, void* mem_base, unsigned int mem_range,
-+	                      OS_SETUP *p_os_setup, HAL_RECEIVEINFO *HalReceiveInfo, 
-+ 	                      OS_RECEIVEINFO **osReceiveInfo, OS_DEVICE *p_dev)
-+{
-+    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info = (CPMAC_RX_CHAN_INFO_T *)p_os_setup;
-+    int                  tot_buf_size    = p_rx_chan_info->chan->tot_buf_size;
-+    int             tot_reserve_bytes    = p_rx_chan_info->chan->tot_reserve_bytes;
-+    struct sk_buff  *p_skb;
-+    void             *ret_ptr;
-+
-+    /* use TI SKB private pool */
-+    p_skb = dev_alloc_skb(tot_buf_size);
-+
-+    if(p_skb == NULL)
-+    {
-+        errPrint("Failed to allocate skb for %s.\n", ((struct net_device*)p_dev)->name);
-+        return (NULL);
-+    }
-+
-+    p_skb->dev = p_dev;
-+    skb_reserve(p_skb, tot_reserve_bytes);
-+
-+    *osReceiveInfo = p_skb;
-+
-+    ret_ptr = skb_put(p_skb, p_rx_chan_info->chan->buffer_size);
-+
-+    return(ret_ptr);
-+}
-+
-+void cpmac_hal_isr(int irq, void *p_param, struct pt_regs *regs)
-+{
-+    CPMAC_ISR_INFO_T      *p_cb_param    = (CPMAC_ISR_INFO_T*) p_param;
-+    CPMAC_DRV_HAL_INFO_T  *p_drv_hal     = p_cb_param->owner;
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_drv_hal->owner;
-+    int                   pkts_to_handle = 0;
-+
-+    if(p_cpmac_priv->non_data_irq_expected)
-+    {
-+        p_cb_param->hal_isr(p_drv_hal->hal_dev, &pkts_to_handle);
-+        p_drv_hal->hal_funcs->PacketProcessEnd(p_drv_hal->hal_dev);
-+    }
-+    else if(!p_cpmac_priv->set_to_close)
-+        tasklet_schedule(&((CPMAC_ISR_INFO_T*) p_param)->tasklet);
-+    else
-+        ; // back off from doing anything more. We are closing down.
-+}
-+
-+void cpmac_handle_tasklet(unsigned long data)
-+{
-+    CPMAC_ISR_INFO_T     *p_cb_param   = (CPMAC_ISR_INFO_T*) data;
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cb_param->owner;
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_drv_hal->owner;
-+    int                  pkts_to_handle;
-+
-+    p_cb_param->hal_isr(p_drv_hal->hal_dev, &pkts_to_handle);
-+
-+    if(test_bit(0, &p_cpmac_priv->non_data_irq_expected) || !pkts_to_handle)
-+        p_drv_hal->hal_funcs->PacketProcessEnd(p_drv_hal->hal_dev);
-+    else if(!test_bit(0, &p_cpmac_priv->set_to_close))
-+        tasklet_schedule(&p_cb_param->tasklet);
-+    else
-+        ; // Back off from processing packets we are closing down.
-+}
-+
-+int cpmac_hal_control(OS_DEVICE *p_dev, const char *key, 
-+	              const char *action, void *value)
-+{
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
-+    int ret_val = -1;
-+
-+    if(key == NULL)
-+    {
-+        dbgPrint("Encountered NULL key.\n");
-+	return (-1);
-+    }
-+
-+    if(cpmac_ci_strcmp(key, "Sleep") == 0 && value != NULL)
-+    {
-+        unsigned int clocks_per_tick  = cpmac_cpu_freq/HZ;
-+	unsigned int requested_clocks = *(unsigned int*)value;
-+	unsigned int requested_ticks  = (requested_clocks + clocks_per_tick - 1)/clocks_per_tick;
-+        mdelay(requested_ticks); 
-+	ret_val = 0;
-+    }
-+    else if(cpmac_ci_strcmp(key, "StateChange") == 0)
-+    {
-+        ret_val = cpmac_p_process_status_ind(p_cpmac_priv);
-+    }
-+    else if(cpmac_ci_strcmp(key, "Tick") == 0 && action != NULL)
-+    {
-+	if(cpmac_ci_strcmp(action, "Set") == 0 && value != NULL)
-+	{
-+            if(*(unsigned int*)value == 0)
-+            {
-+                cpmac_p_stop_timer(p_cpmac_priv->timer + TICK_TIMER);
-+                ret_val = 0;
-+            }
-+            else
-+            {
-+                unsigned int clocks_per_tick  = cpmac_cpu_freq/HZ;
-+	        unsigned int requested_clocks = *(unsigned int*)value;
-+	        unsigned int requested_ticks  = (requested_clocks + clocks_per_tick - 1)/clocks_per_tick;
-+
-+                p_cpmac_priv->delay_ticks =  requested_ticks; /* save it for re-triggering */
-+	        ret_val = cpmac_p_start_timer(p_cpmac_priv->timer + TICK_TIMER, 
-+		  	                      p_cpmac_priv->delay_ticks);
-+            }
-+	}
-+        else if(cpmac_ci_strcmp(action, "Clear") == 0)
-+        {
-+            ret_val = cpmac_p_stop_timer(p_cpmac_priv->timer + TICK_TIMER);
-+        }
-+        else
-+            ;
-+    }
-+    else if(cpmac_ci_strcmp(key, "MacAddr") == 0 && action != NULL)
-+    {
-+        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
-+	{
-+            *(char **)value = p_cpmac_priv->mac_addr; 
-+	    ret_val = 0;
-+	}
-+    }
-+    else if(cpmac_ci_strcmp(key, "CpuFreq") == 0)
-+    {
-+       if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
-+       {
-+           *(unsigned int *)value = cpmac_cpu_freq;
-+           dbgPrint("Cpu frequency for cpmacs is %u\n",cpmac_cpu_freq);
-+           ret_val = 0;
-+       }
-+    }
-+    else if(cpmac_ci_strcmp(key, "SioFlush") == 0)
-+    {
-+       ret_val = 0;
-+       dbgPrint("\n"); 
-+    }
-+    else if(cpmac_ci_strcmp(key, "CpmacFrequency") == 0)
-+    {
-+        /* For Sangam cpmac clock is off the PBUS */
-+        /* OS Needs to supply CORRECT frequency */
-+        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
-+        {
-+            *(unsigned int *)value = CONFIG_AR7_SYS * 1000 * 1000;
-+            ret_val = 0;
-+        }
-+    }
-+    /* For now, providing back the default values. */
-+    else if(cpmac_ci_strcmp(key, "MdioClockFrequency") == 0)
-+    {
-+        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
-+        {
-+            *(unsigned int *)value = 2200000;  /*DEFAULT */
-+            ret_val = 0;
-+        }
-+    }
-+    /* For now, providing back the default values. */
-+    else if(cpmac_ci_strcmp(key, "MdioBusFrequency") == 0)
-+    {
-+        /* For Sangam MdioBusFreq is off the PBUS */
-+        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
-+        {
-+            *(unsigned int *)value = CONFIG_AR7_SYS * 1000 * 1000;
-+            ret_val = 0;
-+        }
-+    }
-+  
-+#if 0 
-+#if defined(CONFIG_AVALANCHE_AUTO_MDIX) 
-+    /* supporting Mdio Mdix switching */
-+    else if(cpmac_ci_strcmp(key, hcMdioMdixSwitch) == 0)
-+    {
-+        /* For Sangam Mdio-switching  action should be always "set"*/
-+        if(cpmac_ci_strcmp(action, hcSet) == 0 && value != NULL )
-+        {
-+           unsigned  int mdix =  *((unsigned int *) value) ;
-+
-+           if(mdix)
-+              avalanche_set_phy_into_mdix_mode();
-+
-+           else
-+              avalanche_set_phy_into_mdi_mode();  
-+  
-+           ret_val = 0;
-+        } 
-+
-+    }
-+#endif
-+#endif
-+    else if(cpmac_ci_strcmp(key, hcMdioMdixSwitch) == 0)
-+    {
-+        /* For Sangam Mdio-switching  action should be always "set"*/
-+        if(cpmac_ci_strcmp(action, hcSet) == 0 && value != NULL )
-+        {
-+           unsigned  int mdix =  *((unsigned int *) value) ;
-+
-+#ifdef CONFIG_AR7_MDIX
-+	   avalanche_set_mdix_on_chip(0xa8610000 , mdix ? 1: 0);
-+#endif
-+  
-+           ret_val = 0;
-+        } 
-+
-+    }
-+
-+    return(ret_val);
-+}
-+
-+
-+int cpmac_hal_receive(OS_DEVICE *p_dev, FRAGLIST *fragList, 
-+                             unsigned int fragCount,
-+                             unsigned int packet_size, 
-+                             HAL_RECEIVEINFO *hal_receive_info,
-+                             unsigned int mode)
-+{
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv  = p_dev->priv;
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal     = p_cpmac_priv->drv_hal;
-+    struct sk_buff       *p_skb         = fragList[0].OsInfo;
-+    p_skb->len                          = fragList[0].len;    
-+
-+    /* invalidate the cache. */
-+    dma_cache_inv((unsigned long)p_skb->data, fragList[0].len);    
-+#ifdef CPMAC_TEST
-+    xdump(p_skb->data, p_skb->len, "recv");
-+#endif
-+#ifdef CPMAC_8021Q_SUPPORT
-+    /* 802.1q stuff, just does the basic checking here. */
-+    if(!p_cpmac_priv->enable_802_1q      &&
-+       p_skb->len > TCI_END_OFFSET       &&
-+       IS_802_1Q_FRAME(p_skb->data + TPID_START_OFFSET))
-+    {
-+         goto cpmac_hal_recv_frame_mismatch;
-+    }
-+#endif
-+    if(fragCount > 1) 	    
-+    {	    
-+       int     len;
-+       struct sk_buff *p_temp_skb;
-+       CPMAC_RX_CHAN_INFO_T *p_rx_chan_info = p_cpmac_priv->rx_chan_info;
-+       int     count;
-+       
-+       dbgPrint("Recv: It is multifragment for %s.\n", p_dev->name);
-+       
-+       p_skb = dev_alloc_skb(packet_size + 
-+          p_rx_chan_info->chan->tot_reserve_bytes); 
-+       if(p_skb == NULL) 
-+       {
-+          p_cpmac_priv->net_dev_stats.rx_errors++;
-+          goto cpmac_hal_recv_alloc_failed;
-+       }
-+       
-+       p_skb->dev = p_dev;
-+       skb_reserve(p_skb, p_rx_chan_info->chan->tot_reserve_bytes);
-+       
-+       for(count = 0; count < fragCount; count++)
-+       {
-+          p_temp_skb = fragList[count].OsInfo;
-+          len        = fragList[count].len;
-+          
-+          dma_cache_inv((unsigned long)p_temp_skb->data, len);
-+          
-+          memcpy(skb_put(p_skb, len), p_temp_skb->data, len);
-+          dev_kfree_skb_any(p_temp_skb);
-+       }
-+    }
-+    
-+
-+#if defined(CONFIG_MIPS_AVALANCHE_MARVELL)                                                                                                   
-+ /* Fetch the receiving port information from EGRESS TRAILOR Bytes*/         
-+     p_dev->if_port = (unsigned char)p_skb->data[packet_size -(EGRESS_TRAILOR_LEN-1)] + AVALANCHE_MARVELL_BASE_PORT_ID;
-+    skb_trim(p_skb, packet_size - EGRESS_TRAILOR_LEN);                                                                       
-+#else                                                                                                                        
-+    /* set length & tail */                                                                                                  
-+    skb_trim(p_skb, packet_size);                                                                                            
-+#endif 
-+ 
-+    p_skb->protocol = eth_type_trans(p_skb, p_dev);
-+
-+    netif_rx(p_skb);
-+
-+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
-+//    avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_RX_ACTIVITY);	
-+//#endif
-+
-+    p_cpmac_priv->net_dev_stats.rx_packets++;
-+    p_cpmac_priv->net_dev_stats.rx_bytes += packet_size;
-+
-+    p_drv_hal->hal_funcs->RxReturn(hal_receive_info,1);
-+
-+    return(0);
-+
-+cpmac_hal_recv_alloc_failed:
-+
-+#ifdef CPMAC_8021Q_SUPPORT
-+cpmac_hal_recv_frame_mismatch:
-+#endif
-+ 
-+    fragCount--;
-+
-+    do
-+    {
-+        dev_kfree_skb_any(fragList[fragCount].OsInfo);
-+    }
-+    while(fragCount--);
-+
-+    p_cpmac_priv->net_dev_stats.rx_dropped++;
-+
-+    return(-1);
-+} /*cpmac_receive*/
-+
-+
-+void cpmac_hal_tear_down_complete(OS_DEVICE*a, int b, int ch)
-+{
-+    dbgPrint("what to do with this.\n");
-+}
-+
-+
-+int  cpmac_hal_send_complete(OS_SENDINFO *p_skb)
-+{
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_skb->dev->priv;
-+
-+    p_cpmac_priv->net_dev_stats.tx_packets++;
-+    p_cpmac_priv->net_dev_stats.tx_bytes += p_skb->len;
-+    
-+    dev_kfree_skb_any(p_skb);
-+
-+    return(0);
-+}
-+
-+
-+int cpmac_reset(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
-+{
-+    // code here to reset the device/hal. Not now.
-+
-+   netif_wake_queue(p_cpmac_priv->owner);
-+   return(0);
-+}
-+
-+#ifdef CPMAC_TEST
-+
-+#define isprint(a) ((a >=' ')&&(a<= '~'))
-+void xdump( u_char*  cp, int  length, char*  prefix )
-+{
-+    int col, count;
-+    u_char prntBuf[120];
-+    u_char*  pBuf = prntBuf;
-+    count = 0;
-+    while(count < length){
-+        pBuf += sprintf( pBuf, "%s", prefix );
-+        for(col = 0;count + col < length && col < 16; col++){
-+            if (col != 0 && (col % 4) == 0)
-+                pBuf += sprintf( pBuf, " " );
-+            pBuf += sprintf( pBuf, "%02X ", cp[count + col] );
-+        }
-+        while(col++ < 16){      /* pad end of buffer with blanks */
-+            if ((col % 4) == 0)
-+                sprintf( pBuf, " " );
-+            pBuf += sprintf( pBuf, "   " );
-+        }
-+        pBuf += sprintf( pBuf, "  " );
-+        for(col = 0;count + col < length && col < 16; col++){
-+            if (isprint((int)cp[count + col]))
-+                pBuf += sprintf( pBuf, "%c", cp[count + col] );
-+            else
-+                pBuf += sprintf( pBuf, "." );
-+                }
-+        sprintf( pBuf, "\n" );
-+        // SPrint(prntBuf);
-+        printk(prntBuf);
-+        count += col;
-+        pBuf = prntBuf;
-+    }
-+
-+}  /* close xdump(... */
-+#endif
-+
-+
-+static int __init cpmac_dev_probe(void)
-+{
-+    int     retVal         = 0;
-+    int     unit;
-+    int     instance_count = CONFIG_MIPS_CPMAC_PORTS;
-+
-+    //cpmac_cpu_freq = avalanche_clkc_get_freq(CLKC_MIPS);
-+    cpmac_cpu_freq = CONFIG_AR7_CPU * 1000 * 1000;
-+
-+    build_psp_config();                       
-+
-+    for(unit = 0; unit < instance_count; unit++)
-+    {
-+        struct net_device	        *p_dev;
-+        CPMAC_PRIVATE_INFO_T            *p_cpmac_priv;
-+        size_t		                dev_size;
-+	int                             failed;
-+
-+        dev_size =    sizeof(struct net_device) 
-+	            + sizeof(CPMAC_PRIVATE_INFO_T);
-+
-+
-+        if((p_dev = (struct net_device *) kmalloc(dev_size, GFP_KERNEL)) == NULL)
-+        {
-+            dbgPrint( "Could not allocate memory for device.\n" );
-+            retVal = -ENOMEM;
-+            break;
-+        }            
-+               
-+        memset(p_dev, 0, dev_size );
-+
-+        p_dev->priv                 = p_cpmac_priv
-+                                    = (CPMAC_PRIVATE_INFO_T*)(((char *) p_dev) + sizeof(struct net_device));
-+        p_cpmac_priv->owner         = p_dev;
-+	
-+        ether_setup(p_dev); 
-+
-+	p_cpmac_priv->instance_num  = unit;
-+        p_dev->init                 = cpmac_dev_init;
-+
-+        g_dev_array[p_cpmac_priv->instance_num] = p_dev;
-+        
-+#if defined CONFIG_MIPS_CPMAC_INIT_BUF_MALLOC
-+        g_init_enable_flag = 1;
-+        printk("Cpmac driver is allocating buffer memory at init time.\n");
-+#endif
-+
-+	/* This section gives a default value by the number of PHY in order to
-+	 * replace the default MACRO. */
-+	{
-+	    char *mac_port = prom_getenv("MAC_PORT"); /* Internal: 0, External: 1 */
-+	    if(!mac_port || (0 != strcmp(mac_port, "0"))) {
-+		printk("Using the MAC with external PHY\n");
-+		cfg_start_link_speed = _CPMDIO_NOPHY;
-+		cpmac_max_frame_size = CPMAC_MAX_FRAME_SIZE + 4;
-+	    }
-+	    else {
-+		printk("Using the MAC with internal PHY\n");
-+		cfg_start_link_speed = CFG_START_LINK_SPEED;
-+		cpmac_max_frame_size = CPMAC_MAX_FRAME_SIZE;
-+	    }
-+	    g_cfg_start_link_params = cfg_start_link_speed;
-+	}
-+
-+        cpmac_p_detect_manual_cfg(cfg_link_speed, cfg_link_mode, cpmac_debug_mode);
-+
-+    	failed = register_netdev(p_dev);
-+        if (failed)
-+        {
-+            dbgPrint("Could not register device for inst %d because of reason \
-+                      code %d.\n", unit, failed);
-+            retVal = -1;
-+            kfree(p_dev);
-+            break;
-+        }           
-+        else
-+        {
-+
-+            char proc_name[100];
-+            int  proc_category_name_len = 0;
-+
-+	    p_cpmac_priv->next_device = last_cpmac_device;
-+            last_cpmac_device         = p_dev;
-+
-+    	    dbgPrint(" %s irq=%2d io=%04x\n",p_dev->name, (int) p_dev->irq,
-+    	    	       (int) p_dev->base_addr);
-+
-+	    strcpy(proc_name, "avalanche/");
-+            strcat(proc_name, p_dev->name);
-+            proc_category_name_len = strlen(proc_name);
-+
-+            strcpy(proc_name + proc_category_name_len, "_rfc2665_stats");
-+            create_proc_read_entry(proc_name,0,NULL,cpmac_p_read_rfc2665_stats, p_dev);
-+
-+    	}
-+    }
-+
-+    if(retVal == 0)
-+    {
-+	/* To maintain backward compatibility with NSP. */
-+        gp_stats_file = create_proc_entry("avalanche/cpmac_stats", 0644, NULL);
-+        if(gp_stats_file)
-+        {
-+            gp_stats_file->read_proc  = cpmac_p_read_stats;
-+            gp_stats_file->write_proc = cpmac_p_write_stats;
-+        }
-+	create_proc_read_entry("avalanche/cpmac_link", 0, NULL, cpmac_p_read_link, NULL);
-+	create_proc_read_entry("avalanche/cpmac_ver", 0, NULL, cpmac_p_get_version, NULL);
-+
-+    }
-+   
-+    cpmac_devices_installed  = unit;
-+    dbgPrint("Installed %d cpmac instances.\n", unit);
-+    return ( (unit >= 0 ) ? 0 : -ENODEV );
-+
-+} /* init_module */
-+
-+
-+/***************************************************************
-+ *	cleanup_module
-+ *
-+ *	Returns:
-+ *		Nothing
-+ *	Parms:
-+ *		None
-+ *
-+ *	Goes through the CpmacDevices list and frees the device
-+ *	structs and memory associated with each device (lists
-+ *	and buffers).  It also ureserves the IO port regions
-+ *	associated with this device.
-+ *
-+ **************************************************************/
-+
-+void cpmac_exit(void)
-+{
-+    struct net_device       *p_dev;
-+    CPMAC_PRIVATE_INFO_T    *p_cpmac_priv;
-+
-+    while (cpmac_devices_installed) 
-+    {
-+        char proc_name[100];
-+        int  proc_category_name_len = 0;
-+
-+        p_dev = last_cpmac_device;
-+        p_cpmac_priv = (CPMAC_PRIVATE_INFO_T *) p_dev->priv;
-+
-+    	dbgPrint("Unloading %s irq=%2d io=%04x\n",p_dev->name, (int) p_dev->irq, (int) p_dev->base_addr);
-+
-+        if(g_init_enable_flag)
-+            cpmac_p_dev_disable(p_dev);
-+      
-+        cpmac_drv_cleanup(p_cpmac_priv->drv_hal);
-+
-+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
-+//        avalanche_led_unregister(p_cpmac_priv->led_handle);
-+//#endif
-+	strcpy(proc_name, "avalanche/");
-+        strcat(proc_name, p_dev->name);
-+        proc_category_name_len = strlen(proc_name);
-+
-+        strcpy(proc_name + proc_category_name_len, "_rfc2665_stats");
-+        remove_proc_entry(proc_name, NULL);
-+        
-+        release_mem_region(p_dev->base_addr, p_cpmac_priv->dev_size);
-+        unregister_netdev(p_dev);
-+	last_cpmac_device = p_cpmac_priv->next_device;
-+
-+        kfree(p_cpmac_priv->drv_hal);
-+        kfree(p_dev);
-+     
-+	cpmac_devices_installed--;
-+    }
-+
-+    if(gp_stats_file)
-+        remove_proc_entry("avalanche/cpmac_stats", NULL);
-+
-+    remove_proc_entry("avalanche/cpmac_link",  NULL);
-+    remove_proc_entry("avalanche/cpmac_ver",   NULL);
-+
-+    psp_config_cleanup();
-+}
-+
-+     
-+module_init(cpmac_dev_probe);
-+module_exit(cpmac_exit);
-diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac.h linux.dev/drivers/net/avalanche_cpmac/cpmac.h
---- linux.old/drivers/net/avalanche_cpmac/cpmac.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cpmac.h	2005-07-12 02:48:42.043594000 +0200
-@@ -0,0 +1,379 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    CPMAC Linux Network Device Driver Header
-+ ******************************************************************************
-+ * FILE NAME:       cpmac.h
-+ *
-+ * DESCRIPTION:     CPMAC Network Device Driver Header
-+ *
-+ * REVISION HISTORY:
-+ * Date            Name                   Details
-+ *----------------------------------------------------------------------------- 
-+ * 27 Nov 2002     Suraj S Iyer           Initial Create.
-+ * 09 Jun 2003     Suraj S Iyer           Preparing for GA.
-+ *
-+ * (C) Copyright 2003, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+#ifndef CPMAC_H
-+#define CPMAC_H
-+
-+#include <linux/timer.h>
-+#include <linux/netdevice.h>
-+#include <asm/semaphore.h>
-+#include <linux/ctype.h>
-+#include <linux/interrupt.h>
-+
-+#include "cpmacHalLx.h"
-+/*-----------------------------------------------------------------------------
-+ * Config macros. Use these to config the driver.
-+ *---------------------------------------------------------------------------*/
-+#define CPMAC_MAX_FRAME_SIZE         1518
-+
-+#if defined(CONFIG_AR7WRD) || defined(CONFIG_AR7WI) || defined(CONFIG_AR7VWI)|| defined(CONFIG_AR7VW) 
-+#define CFG_RX_NUM_BUF_DESC            64 
-+#define CFG_RX_NUM_BUF_SERVICE         32 
-+#else                                     
-+#define CFG_RX_NUM_BUF_DESC            16 
-+#define CFG_RX_NUM_BUF_SERVICE         8  
-+#endif                                    
-+
-+#define CFG_RX_BUF_OFFSET              0
-+
-+#define CFG_TX_NUM_BUF_DESC            128
-+#define CFG_TX_NUM_BUF_SERVICE         20 
-+#define CFG_TX_BUF_OFFSET              0  /* Lets not change this. */
-+#define CFG_TX_TIMEOUT                 2000 /* ticks*/
-+#define CFG_TX_INT_DISABLE             1  /* Disable the Tx Complete interrupt */
-+
-+#define CFG_JUMBO_FRAMES               1
-+#define CFG_SHORT_FRAMES               1
-+#define CFG_PROMISCOUS                 1
-+#define CFG_BROADCAST                  1
-+#define CFG_MULTICAST                  1
-+#define CFG_ALL_MULTI                  (1*(CFG_MULTICAST))
-+#define CFG_AUTO_NEGOTIATION           1
-+
-+#if defined (CONFIG_MIPS_AVALANCHE_MARVELL)
-+#define EGRESS_TRAILOR_LEN             4 
-+#define CFG_START_LINK_SPEED           (_CPMDIO_NOPHY)
-+#undef  CPMAC_MAX_FRAME_SIZE
-+#define CPMAC_MAX_FRAME_SIZE          (1518 + EGRESS_TRAILOR_LEN)
-+#else
-+#define CFG_START_LINK_SPEED          (_CPMDIO_10 | _CPMDIO_100 | _CPMDIO_HD | _CPMDIO_FD) /* auto nego */
-+#endif
-+
-+#define CFG_LOOP_BACK                  1
-+#define CFG_TX_FLOW_CNTL               0
-+#define CFG_RX_FLOW_CNTL               0
-+#define CFG_TX_PACING                  0
-+#define CFG_RX_PASS_CRC                0
-+#define CFG_QOS_802_1Q                 0
-+#define CFG_TX_NUM_CHAN                1
-+
-+
-+/*-----------------------------------------------------------------------------
-+ * Private macros.
-+ *---------------------------------------------------------------------------*/
-+#define MAX_TIMER               2
-+#define TX_TIMER                0
-+#define TICK_TIMER              0
-+#define MAX_TX_CHAN             8
-+
-+#define CPMAC_LINK_OFF          0
-+#define CPMAC_LINK_ON           1
-+/*#define CPMAC_SPEED_100         2
-+#define CPMAC_SPEED_10          3
-+#define CPMAC_FULL_DPLX         4
-+#define CPMAC_HALF_DPLX         5*/
-+#define CPMAC_RX_ACTIVITY       2
-+#define CPMAC_TX_ACTIVITY       3
-+
-+struct cpmac_timer_info;
-+
-+typedef int  (*CPMAC_HAL_ISR_FUNC_T)(HAL_DEVICE*, int*);
-+typedef int  (*CPMAC_TIMEOUT_CB_T)(struct cpmac_timer_info*);
-+
-+typedef struct cpmac_ability_info
-+{
-+    int promiscous;
-+    int broadcast;
-+    int multicast;
-+    int all_multi;
-+    int loop_back;
-+    int jumbo_frames;
-+    int short_frames;
-+    int auto_negotiation;
-+    int tx_flow_control;
-+    int rx_flow_control;
-+    int tx_pacing;
-+    int link_speed;
-+    int rx_pass_crc;
-+    int qos_802_1q;
-+    int tx_num_chan;
-+}
-+CPMAC_ABILITY_INFO_T;
-+
-+#ifdef DEBUG
-+typedef struct cpmac_timer_info
-+{
-+    void               *owner;
-+    UINT32             delay_ticks;
-+    WDOG_ID            timer_id;
-+    UINT32             is_running;
-+    UINT32             timer_set_at;
-+    CPMAC_TIMEOUT_CB_T timeout_CB;
-+} CPMAC_TIMER_INFO_T;
-+
-+typedef struct
-+{
-+    void               *owner;
-+    unsigned int       num_cl_desc;
-+    CL_DESC            *cl_desc_tbl;
-+    M_CL_CONFIG        *m_cl_blk_config;
-+    NET_POOL           *net_pool;
-+    CL_POOL_ID         clPoolId;
-+
-+} CPMAC_NET_MEM_INFO_T;
-+
-+#endif
-+
-+typedef struct
-+{
-+    void                  *owner;
-+    CPMAC_HAL_ISR_FUNC_T  hal_isr;
-+    struct tasklet_struct tasklet;
-+    int                   intr;
-+
-+} CPMAC_ISR_INFO_T;
-+
-+typedef struct cpmac_chan
-+{
-+   int num_BD;
-+   int buffer_size;
-+   int buffer_offset;
-+   int service_max;
-+   int state;
-+   int tot_buf_size;
-+   int tot_reserve_bytes;
-+
-+} CPMAC_CHAN_T;
-+
-+#define CHAN_CLOSE  0
-+#define CHAN_OPENED 1
-+
-+typedef struct 
-+{
-+    int          cfg_chan;
-+    int          dev_chan;
-+    int          opened_chan;
-+    CPMAC_CHAN_T chan[1];
-+    int          enable_802_1q;
-+
-+} CPMAC_RX_CHAN_INFO_T;
-+
-+typedef struct
-+{
-+    int          cfg_chan;
-+    int          dev_chan;
-+    int          opened_chan;
-+    int          tx_int_disable;
-+    CPMAC_CHAN_T chan[MAX_TX_CHAN];
-+   
-+} CPMAC_TX_CHAN_INFO_T;
-+
-+
-+
-+typedef struct
-+{
-+   void                        *owner;
-+   HAL_FUNCTIONS               *hal_funcs;
-+   HAL_DEVICE                  *hal_dev;
-+   OS_FUNCTIONS                *os_funcs; 
-+//   SEM_ID                      chan_teardown_sem;
-+   int                         non_data_irq_expected;
-+} CPMAC_DRV_HAL_INFO_T;
-+
-+
-+typedef struct
-+{
-+    unsigned long tx_discards;
-+    unsigned long rx_discards;
-+    unsigned long start_tick;
-+
-+} CPMAC_DRV_STATS_T;
-+
-+typedef struct 
-+{
-+    unsigned long   ifInGoodFrames;
-+    unsigned long   ifInBroadcasts;
-+    unsigned long   ifInMulticasts;
-+    unsigned long   ifInPauseFrames;
-+    unsigned long   ifInCRCErrors;
-+    unsigned long   ifInAlignCodeErrors;
-+    unsigned long   ifInOversizedFrames;
-+    unsigned long   ifInJabberFrames;
-+    unsigned long   ifInUndersizedFrames;
-+    unsigned long   ifInFragments;
-+    unsigned long   ifInFilteredFrames;
-+    unsigned long   ifInQosFilteredFrames;
-+    unsigned long   ifInOctets;
-+    unsigned long   ifOutGoodFrames;
-+    unsigned long   ifOutBroadcasts;
-+    unsigned long   ifOutMulticasts;
-+    unsigned long   ifOutPauseFrames;
-+    unsigned long   ifDeferredTransmissions;
-+    unsigned long   ifCollisionFrames;
-+    unsigned long   ifSingleCollisionFrames;
-+    unsigned long   ifMultipleCollisionFrames;
-+    unsigned long   ifExcessiveCollisionFrames;
-+    unsigned long   ifLateCollisions;
-+    unsigned long   ifOutUnderrun;
-+    unsigned long   ifCarrierSenseErrors;
-+    unsigned long   ifOutOctets;
-+    unsigned long   if64OctetFrames;
-+    unsigned long   if65To127OctetFrames;
-+    unsigned long   if128To255OctetFrames;
-+    unsigned long   if256To511OctetFrames;
-+    unsigned long   if512To1023OctetFrames;
-+    unsigned long   if1024ToUPOctetFrames;
-+    unsigned long   ifNetOctets;
-+    unsigned long   ifRxSofOverruns;
-+    unsigned long   ifRxMofOverruns;
-+    unsigned long   ifRxDMAOverruns;
-+
-+} CPMAC_DEVICE_MIB_T;
-+
-+
-+typedef struct
-+{
-+    void                         *owner;
-+    int                          timer_count;
-+    int                          timer_created;
-+    struct timer_list            timer[1];
-+    CPMAC_DRV_HAL_INFO_T         *drv_hal;
-+    unsigned int                 num_of_intr;
-+    CPMAC_ISR_INFO_T             cpmac_isr;
-+    unsigned int                 link_speed;
-+    unsigned int                 link_mode;
-+    unsigned int                 enable_802_1q;
-+    unsigned int                 timer_access_hal;
-+    unsigned int                 loop_back;
-+    CPMAC_RX_CHAN_INFO_T         *rx_chan_info;
-+    CPMAC_TX_CHAN_INFO_T         *tx_chan_info;
-+    CPMAC_ABILITY_INFO_T         *ability_info;
-+    CPMAC_DEVICE_MIB_T           *device_mib;
-+    CPMAC_DRV_STATS_T            *stats;
-+    unsigned int                 flags;
-+    unsigned int                 delay_ticks;
-+    char                         mac_addr[6];
-+    struct net_device_stats      net_dev_stats; 
-+//    rwlock_t                     rw_lock;
-+    int                          set_to_close;
-+    struct net_device            *next_device;
-+    unsigned int                 instance_num;
-+    unsigned int                 non_data_irq_expected;
-+    unsigned long                dev_size;
-+    void*                        led_handle;
-+} CPMAC_PRIVATE_INFO_T;
-+
-+
-+/* Private flags */
-+
-+/* bit 0 to 31, bit 32 is used to indicate set or reset */
-+
-+#define IFF_PRIV_SHORT_FRAMES   0x00010000
-+#define IFF_PRIV_JUMBO_FRAMES   0x00020000
-+#define IFF_PRIV_AUTOSPEED      0x00080000
-+#define IFF_PRIV_LINK10_HD      0x00100000
-+#define IFF_PRIV_LINK10_FD      0x00200000
-+#define IFF_PRIV_LINK100_HD     0x00400000
-+#define IFF_PRIV_LINK100_FD     0x00800000
-+#define IFF_PRIV_8021Q_EN       0x01000000
-+#define IFF_PRIV_NUM_TX_CHAN    0x02000000
-+#define IFF_PRIV_TX_FLOW_CNTL   0x04000000
-+#define IFF_PRIV_RX_FLOW_CNTL   0x08000000
-+#define IFF_PRIV_TX_PACING      0x10000000
-+#define IFF_PRIV_RX_PASS_CRC    0x20000000
-+
-+#define PRIVCSFLAGS             0x200
-+#define PRIVCGFLAGS             0x201
-+
-+
-+#define BLOCKING      1
-+#define CHAN_TEARDOWN 2
-+#define CHAN_SETUP    4
-+#define COMPLETE      8
-+#define FREE_BUFFER   16
-+
-+
-+static const char pszStats0[]            = "Stats0";
-+static const char pszStats1[]            = "Stats1";
-+static const char pszStats2[]            = "Stats2";
-+static const char pszStats3[]            = "Stats3";
-+static const char pszStats4[]            = "Stats4";
-+static const char pszStatsDump[]         = "StatsDump";
-+static const char pszStatsClear[]        = "StatsClear";
-+static const char pszRX_PASS_CRC[]       = "RX_PASS_CRC";
-+static const char pszRX_QOS_EN[]         = "RX_QOS_EN";
-+static const char pszRX_NO_CHAIN[]       = "RX_NO_CHAIN";
-+static const char pszRX_CMF_EN[]         = "RX_CMF_EN";
-+static const char pszRX_CSF_EN[]         = "RX_CSF_EN";
-+static const char pszRX_CEF_EN[]         = "RX_CEF_EN";
-+static const char pszRX_CAF_EN[]         = "RX_CAF_EN";
-+static const char pszRX_PROM_CH[]        = "RX_PROM_CH";
-+static const char pszRX_BROAD_EN[]       = "RX_BROAD_EN";
-+static const char pszRX_BROAD_CH[]       = "RX_BROAD_CH";
-+static const char pszRX_MULT_EN[]        = "RX_MULT_EN";
-+static const char pszRX_MULT_CH[]        = "RX_MULT_CH";
-+static const char pszTX_PTYPE[]          = "TX_PTYPE";
-+static const char pszTX_PACE[]           = "TX_PACE";
-+static const char pszMII_EN[]            = "MII_EN";
-+static const char pszTX_FLOW_EN[]        = "TX_FLOW_EN";
-+static const char pszRX_FLOW_EN[]        = "RX_FLOW_EN";
-+static const char pszRX_MAXLEN[]         = "RX_MAXLEN";
-+static const char pszRX_FILTERLOWTHRESH[]   = "RX_FILTERLOWTHRESH";
-+static const char pszRX0_FLOWTHRESH[]   = "RX0_FLOWTHRESH";
-+static const char pszRX_UNICAST_SET[]    = "RX_UNICAST_SET";
-+static const char pszRX_UNICAST_CLEAR[]  = "RX_UNICAST_CLEAR";
-+static const char pszMdioConnect[]       = "MdioConnect";
-+static const char pszMacAddr[]           = "MacAddr";
-+static const char pszTick[]              = "Tick";
-+static const char pszRX_MULTICAST[]      = "RX_MULTICAST";
-+static const char pszRX_MULTI_ALL[]      = "RX_MULTI_ALL";
-+static const char pszRX_MULTI_SINGLE[]   = "RX_MULTI_SINGLE";
-+
-+static const char pszSet[]               = "Set";
-+static const char pszGet[]               = "Get";
-+static const char pszClear[]             = "Clear";
-+
-+
-+void *cpmac_hal_malloc_buffer(unsigned int size, void *MemBase, unsigned int MemRange,
-+                              HAL_DEVICE *HalDev, HAL_RECEIVEINFO *HalReceiveInfo, 
-+                              OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev);
-+
-+void cpmac_hal_tear_down_complete(OS_DEVICE*, int, int);
-+int  cpmac_hal_control(OS_DEVICE *p_END_obj, const char *key, 
-+                   const char *action, void *value);
-+int  cpmac_hal_receive(OS_DEVICE *p_END_obj, FRAGLIST *fragList, 
-+               unsigned int FragCount, unsigned int pkt_len, 
-+               HAL_RECEIVEINFO *halReceiveInfo, 
-+               unsigned int mode);
-+int  cpmac_hal_send_complete(OS_SENDINFO*);
-+
-+void  cpmac_hal_isr(int irq, void *p_param, struct pt_regs *p_cb_param);
-+void  cpmac_handle_tasklet(unsigned long data);
-+
-+inline static int cpmac_ci_strcmp(const char *s1, const char *s2)
-+{
-+    while(*s1 && *s2)
-+    {
-+        if(tolower(*s1) != tolower(*s2))
-+            break;
-+        s1++;
-+        s2++;
-+    }
-+
-+    return(tolower(*s1) - tolower(*s2));
-+}
-+
-+#endif
-diff -urN linux.old/drivers/net/avalanche_cpmac/cpmacHalLx.c linux.dev/drivers/net/avalanche_cpmac/cpmacHalLx.c
---- linux.old/drivers/net/avalanche_cpmac/cpmacHalLx.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cpmacHalLx.c	2005-07-12 02:48:42.044593000 +0200
-@@ -0,0 +1,492 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    CPMAC Net Driver HAL support Source
-+ ******************************************************************************
-+ * FILE NAME:       cpmacHalLx.c
-+ *
-+ * DESCRIPTION:     CPMAC Network Device Driver Source
-+ *
-+ * REVISION HISTORY:
-+ *
-+ * Date           Description                               Author
-+ *-----------------------------------------------------------------------------
-+ * 27 Nov 2002    Initial Creation                          Suraj S Iyer  
-+ * 09 Jun 2003    Updates for GA                            Suraj S Iyer
-+ * 18 Dec 2003    Updated for 5.7                           Suraj S Iyer
-+ *
-+ * (C) Copyright 2003, Texas Instruments, Inc
-+ *******************************************************************************/
-+#include <linux/kernel.h> 
-+#include <linux/module.h> 
-+#include <linux/init.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/delay.h>     
-+#include <linux/spinlock.h>
-+#include <linux/proc_fs.h>
-+#include <asm/io.h>
-+#include <linux/string.h>
-+
-+#include <asm/ar7/avalanche_intc.h>
-+
-+#include "cpmacHalLx.h"
-+#include "cpmac.h"
-+
-+/* PSP config headers */
-+#include "psp_config_parse.h"
-+#include "psp_config_mgr.h"
-+
-+/* debug */                                 
-+extern int cpmac_debug_mode;
-+#define dbgPrint if (cpmac_debug_mode) printk
-+#define errPrint printk
-+
-+char CpmacSignature[] = "Cpmac driver";
-+static unsigned long irq_flags = 0;
-+OS_SETUP *p_os_setup = NULL;
-+
-+extern int avalanche_request_intr_pacing(int, unsigned int, unsigned int);
-+extern int avalanche_free_intr_pacing(unsigned int blk_num);
-+
-+/*----------------------------------------------------------------------------
-+ * Parameter extracting functionalities.
-+ *--------------------------------------------------------------------------*/
-+static int os_find_parm_u_int(void *info_ptr, const char *param, unsigned int *val)
-+{
-+    int ret_val = 0;
-+
-+    if((ret_val = psp_config_get_param_uint(info_ptr, param, val)) == -1)
-+    {
-+        dbgPrint("Error: could not locate the requested \"%s\" param.\n",param);
-+        ret_val = -1;
-+    }
-+
-+    return(ret_val);
-+}
-+
-+static int os_find_parm_val(void *info_ptr, const char *param, void *val)
-+{
-+    int ret_val = 0;
-+
-+    if(psp_config_get_param_string(info_ptr, param, val) == -1)
-+    {
-+        dbgPrint("Error: could not locate the requested \"%s\" param.\n",param);
-+        ret_val = -1;
-+    }
-+
-+    return(ret_val);
-+}
-+
-+static int os_find_device(int unit, const char *find_name, void *device_info)
-+{
-+    int ret_val = 0;
-+
-+    if(psp_config_get((char *)find_name, unit, device_info) == -1)
-+    {
-+        dbgPrint("Error: could not locate the requested \"%s\" param.\n", find_name);
-+        ret_val = -1;
-+    }
-+
-+    return(ret_val);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * Memory related OS abstraction.
-+ *--------------------------------------------------------------------------*/
-+void os_free(void *mem_ptr)
-+{
-+    kfree(mem_ptr);
-+}
-+
-+void  os_free_buffer(OS_RECEIVEINFO *osReceiveInfo, void *mem_ptr)
-+{
-+    dev_kfree_skb_any(osReceiveInfo);
-+}
-+
-+void  os_free_dev(void *mem_ptr)
-+{
-+    kfree(mem_ptr);
-+}
-+
-+void os_free_dma_xfer(void *mem_ptr)
-+{
-+    kfree(mem_ptr);
-+}
-+
-+static void *os_malloc(unsigned int size)
-+{
-+    return(kmalloc(size, GFP_KERNEL));
-+}
-+
-+static void *os_malloc_dma_xfer(unsigned int size, 
-+                                void         *mem_base, 
-+                                unsigned int mem_range)
-+{
-+    return(kmalloc(size, GFP_KERNEL));
-+}
-+
-+static void *os_malloc_dev(unsigned int size)
-+{
-+    return(kmalloc(size, GFP_KERNEL));
-+}
-+
-+
-+/*----------------------------------------------------------------------------
-+ * CRITICAL SECTION ENABLING/DISABLING.
-+ *--------------------------------------------------------------------------*/
-+static void os_critical_on(void)
-+{
-+    save_and_cli(irq_flags);
-+}
-+
-+static void os_critical_off(void)
-+{
-+    restore_flags(irq_flags);
-+}
-+
-+/*----------------------------------------------------------------------------
-+ * Cache related abstraction
-+ *--------------------------------------------------------------------------*/
-+static void os_cache_invalidate(void *mem_ptr, int size)
-+{
-+    dma_cache_inv((unsigned long)mem_ptr, size);
-+}
-+
-+static void os_cache_writeback(void *mem_ptr, int size)
-+{
-+    dma_cache_wback_inv((unsigned long)mem_ptr, size);
-+}
-+
-+/*-----------------------------------------------------------------------------
-+ * Support functions.
-+ *---------------------------------------------------------------------------*/
-+
-+static void  hal_drv_unregister_isr(OS_DEVICE *p_dev, int intr)
-+{
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
-+    CPMAC_ISR_INFO_T     *p_isr_cb_param = &p_cpmac_priv->cpmac_isr;
-+    intr                                 = LNXINTNUM(intr);
-+
-+    free_irq(p_isr_cb_param->intr, p_isr_cb_param);
-+
-+    dbgPrint("cpmac_hal_unregister called for the intr %d for unit %x and isr_cb_param %x.\n", 
-+             intr, p_cpmac_priv->instance_num, (unsigned int )&p_cpmac_priv->cpmac_isr);
-+}
-+
-+
-+static void hal_drv_register_isr(OS_DEVICE *p_dev, 
-+                                 CPMAC_HAL_ISR_FUNC_T hal_isr, int intr)
-+{
-+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
-+    CPMAC_DRV_HAL_INFO_T *p_drv_hal      = p_cpmac_priv->drv_hal;
-+    CPMAC_ISR_INFO_T     *p_isr_cb_param = &p_cpmac_priv->cpmac_isr;
-+    intr                                 = LNXINTNUM(intr);
-+       
-+    dbgPrint("osRegister called for the intr %d for device %x and p_isr_cb_param %x.\n", 
-+             intr, (bit32u)p_dev, (bit32u)p_isr_cb_param);
-+
-+    p_isr_cb_param->owner       = p_drv_hal;
-+    p_isr_cb_param->hal_isr     = hal_isr;
-+    p_isr_cb_param->intr        = intr;
-+
-+    tasklet_init(&p_isr_cb_param->tasklet, cpmac_handle_tasklet, (unsigned long)p_isr_cb_param);
-+    dbgPrint("Success in registering irq %d for Cpmac unit# %d.\n", intr, p_cpmac_priv->instance_num); 
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * FUNCTIONS called by the CPMAC Net Device.
-+ *-------------------------------------------------------------------------*/
-+static int load_os_funcs(OS_FUNCTIONS *os_func)
-+{
-+    dbgPrint("os_init_module: Start\n"); 
-+    if( os_func == 0 )
-+    {
-+        return(sizeof(OS_FUNCTIONS));   
-+    }
-+
-+    os_func->Control                    = cpmac_hal_control;
-+    os_func->CriticalOn                 = os_critical_on;
-+    os_func->CriticalOff                = os_critical_off;
-+    os_func->DataCacheHitInvalidate     = os_cache_invalidate;
-+    os_func->DataCacheHitWriteback      = os_cache_writeback;       
-+    os_func->DeviceFindInfo     = os_find_device;
-+    os_func->DeviceFindParmUint = os_find_parm_u_int;
-+    os_func->DeviceFindParmValue= os_find_parm_val;
-+    os_func->Free               = os_free;
-+    os_func->FreeRxBuffer       = os_free_buffer;
-+    os_func->FreeDev            = os_free_dev;
-+    os_func->FreeDmaXfer        = os_free_dma_xfer;
-+    os_func->IsrRegister        = hal_drv_register_isr;
-+    os_func->IsrUnRegister      = hal_drv_unregister_isr;
-+    os_func->Malloc             = os_malloc;
-+    os_func->MallocDev          = os_malloc_dev;
-+    os_func->MallocDmaXfer      = os_malloc_dma_xfer;
-+    os_func->MallocRxBuffer     = cpmac_hal_malloc_buffer;
-+    os_func->Memset             = memset;
-+    os_func->Printf             = printk;
-+    os_func->Receive            = cpmac_hal_receive;
-+    os_func->SendComplete       = cpmac_hal_send_complete;
-+    os_func->Strcmpi            = cpmac_ci_strcmp;
-+    os_func->TeardownComplete   = cpmac_hal_tear_down_complete;
-+    os_func->Strstr             = strstr;
-+    os_func->Strtoul            = simple_strtol;
-+    os_func->Sprintf            = sprintf;
-+    os_func->Strlen             = strlen;
-+
-+    dbgPrint("os_init_module: Leave\n");             
-+  
-+    return(0);
-+}
-+
-+
-+int cpmac_drv_init(CPMAC_DRV_HAL_INFO_T *p_drv_hal)
-+{
-+    HAL_DEVICE       *p_hal_dev    = p_drv_hal->hal_dev;
-+    HAL_FUNCTIONS    *p_hal_funcs  = p_drv_hal->hal_funcs;
-+
-+    return(p_hal_funcs->Init(p_hal_dev));
-+}
-+
-+int cpmac_drv_cleanup(CPMAC_DRV_HAL_INFO_T *p_drv_hal)
-+{
-+    HAL_DEVICE       *p_hal_dev    = p_drv_hal->hal_dev;
-+    HAL_FUNCTIONS    *p_hal_funcs  = p_drv_hal->hal_funcs;
-+
-+    int              ret_val       = p_hal_funcs->Shutdown(p_hal_dev);
-+
-+#if 0
-+    if(ret_val == 0)
-+        kfree(p_hal_funcs);
-+    else
-+        ret_val = -1;
-+#endif
-+
-+    kfree(p_drv_hal->os_funcs); 
-+    
-+    return (ret_val); 
-+}
-+
-+int cpmac_drv_tx_setup(HAL_FUNCTIONS        *p_hal_funcs,
-+                       HAL_DEVICE           *p_hal_dev,
-+                       CPMAC_TX_CHAN_INFO_T *p_tx_chan_info)
-+{
-+    int ret_val = 0;
-+    int count   = 0;
-+    CHANNEL_INFO chan_info;
-+
-+    /* Let's setup the TX Channels. */
-+    for(count=0; count < p_tx_chan_info->cfg_chan; count++)
-+    {
-+        chan_info.Channel        = count;
-+        chan_info.Direction      = DIRECTION_TX;       
-+        chan_info.TxNumBuffers   = p_tx_chan_info->chan[count].num_BD;
-+        chan_info.TxServiceMax   = p_tx_chan_info->chan[count].service_max;
-+        chan_info.TxNumQueues    = 0;
-+        
-+        if((ret_val = p_hal_funcs->ChannelSetup(p_hal_dev, &chan_info,
-+                                                NULL)) != 0)
-+        {
-+            errPrint("Error in opening channel %d for TX.\n", count);
-+            ret_val = -1;
-+            break;
-+        }
-+
-+        p_tx_chan_info->opened_chan++;
-+    }
-+
-+    return(ret_val);
-+}
-+
-+int cpmac_drv_rx_setup(HAL_FUNCTIONS         *p_hal_funcs,
-+                       HAL_DEVICE            *p_hal_dev,
-+                       CPMAC_RX_CHAN_INFO_T  *p_rx_chan_info)
-+{
-+    int ret_val = 0;
-+    CHANNEL_INFO chan_info;
-+
-+    chan_info.Channel       = 0;
-+    chan_info.Direction     = DIRECTION_RX;
-+    chan_info.RxBufSize     = p_rx_chan_info->chan[0].buffer_size;
-+    chan_info.RxBufferOffset= p_rx_chan_info->chan[0].buffer_offset;
-+    chan_info.RxNumBuffers  = p_rx_chan_info->chan[0].num_BD;
-+    chan_info.RxServiceMax  = p_rx_chan_info->chan[0].service_max;
-+
-+    if(p_hal_funcs->ChannelSetup(p_hal_dev, &chan_info, p_rx_chan_info) != 0) 
-+    {
-+        errPrint("Error in opening channel %d for RX.\n", 0);
-+        ret_val = -1;
-+    }
-+
-+    return(ret_val);
-+}
-+
-+int cpmac_drv_start(CPMAC_DRV_HAL_INFO_T *p_drv_hal,
-+                    CPMAC_TX_CHAN_INFO_T *p_tx_chan_info,
-+                    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info,
-+                    unsigned int         flags)
-+{
-+    int ret_val = 0;
-+    HAL_FUNCTIONS *p_hal_funcs = p_drv_hal->hal_funcs;
-+    HAL_DEVICE    *p_hal_dev   = p_drv_hal->hal_dev;
-+
-+    dbgPrint("It is in cpmac_drv_start for %x.\n", (unsigned int)p_drv_hal);
-+
-+    if(flags & CHAN_SETUP)
-+    {
-+        if(cpmac_drv_tx_setup(p_hal_funcs, p_hal_dev, 
-+                  p_tx_chan_info)!=0)
-+        {
-+            errPrint("Failed to set up tx channel(s).\n");
-+            ret_val = -1;
-+        }
-+        else if(cpmac_drv_rx_setup(p_hal_funcs, p_hal_dev,
-+                                   p_rx_chan_info)!=0)
-+        {
-+            errPrint("Failed to set up rx channel.\n");
-+            ret_val = -1;
-+        }
-+        else
-+        {
-+            ret_val = 0;
-+        }
-+    }
-+
-+    /* Error in setting up the Channels, quit. */
-+    if((ret_val == 0) && (ret_val = p_hal_funcs->Open(p_hal_dev)) != 0)
-+    {
-+        errPrint("failed to open the HAL!!!.\n");
-+        ret_val = -1;
-+    }
-+
-+    return (ret_val);
-+} /* cpmac_drv_start */
-+
-+
-+
-+int cpmac_drv_tx_teardown(HAL_FUNCTIONS        *p_hal_funcs,
-+                          HAL_DEVICE           *p_hal_dev,
-+                          CPMAC_TX_CHAN_INFO_T *p_tx_chan_info,
-+                          unsigned int         flags)
-+{
-+    int ret_val = 0;
-+    int count   = 0;
-+
-+    /* Let's setup the TX Channels. */
-+    for(;  p_tx_chan_info->opened_chan > 0; 
-+        p_tx_chan_info->opened_chan--, count++)
-+    {
-+        if(p_hal_funcs->ChannelTeardown(p_hal_dev, count, flags) != 0)
-+        {
-+            errPrint("Error in tearing down channel %d for TX.\n", count);
-+            ret_val = -1;
-+            break;
-+        }
-+    }
-+
-+    return(ret_val);
-+}
-+
-+
-+int cpmac_drv_rx_teardown(HAL_FUNCTIONS *p_hal_funcs,
-+                  HAL_DEVICE    *p_hal_dev,
-+              unsigned int  flags)
-+{
-+    int ret_val = 0;
-+
-+    if(p_hal_funcs->ChannelTeardown(p_hal_dev, 0, flags) != 0) 
-+    {
-+        errPrint("Error in tearing down channel %d for RX.\n", 0);
-+        ret_val = -1;
-+    }
-+
-+    return(ret_val);
-+}
-+
-+int cpmac_drv_stop(CPMAC_DRV_HAL_INFO_T    *p_drv_hal,
-+                   CPMAC_TX_CHAN_INFO_T    *p_tx_chan_info,
-+                   CPMAC_RX_CHAN_INFO_T    *p_rx_chan_info,
-+                   unsigned int flags)
-+{
-+    HAL_DEVICE       *p_hal_dev    = p_drv_hal->hal_dev;
-+    HAL_FUNCTIONS    *p_hal_funcs  = p_drv_hal->hal_funcs;
-+    int ret_val                    = 0;
-+
-+    if(flags & CHAN_TEARDOWN)
-+    {
-+        unsigned int chan_flags = 0;
-+
-+        if(flags & FREE_BUFFER) chan_flags |= 0x4; /* full tear down */
-+        if(flags & BLOCKING)    chan_flags |= 0x8; /* blocking call  */
-+
-+        dbgPrint("The teardown flags are %d.\n", flags);
-+        dbgPrint("The teardown chan flags are %d.\n", chan_flags);
-+
-+        if(cpmac_drv_tx_teardown(p_hal_funcs, p_hal_dev, 
-+                                 p_tx_chan_info, chan_flags | 0x1) != 0)
-+        {
-+            ret_val = -1;
-+            errPrint("The tx channel teardown failed.\n");
-+        }
-+        else if(cpmac_drv_rx_teardown(p_hal_funcs, p_hal_dev, chan_flags | 0x2) != 0)
-+        {
-+            ret_val = -1;
-+            errPrint("The rx channel teardown failed.\n");
-+        }
-+        else
-+        {
-+            ;
-+        }
-+    }
-+
-+    if(ret_val == 0)
-+    {
-+        int close_flags = 1;
-+
-+        if(flags & FREE_BUFFER)  close_flags = 2;
-+//        if(flags & COMPLETE)     close_flags = 3;
-+
-+        if(p_hal_funcs->Close(p_hal_dev, close_flags) != 0)
-+        {
-+            ret_val = -1;
-+        }
-+    }
-+        
-+    return(ret_val);
-+}
-+
-+int cpmac_drv_init_module(CPMAC_DRV_HAL_INFO_T *p_drv_hal, OS_DEVICE *p_os_dev, int inst)
-+{
-+    int ret_val = -1;
-+    int hal_func_size;
-+
-+    dbgPrint("Entering the CpmacInitModule for the inst %d \n", inst);
-+
-+    if((p_drv_hal->os_funcs = kmalloc(sizeof(OS_FUNCTIONS), GFP_KERNEL)) == NULL)
-+    {
-+        errPrint("Failed to allocate memory for OS_FUNCTIONS.\n");
-+    }
-+    else if(load_os_funcs(p_drv_hal->os_funcs) != 0)
-+    {
-+        errPrint("Failed to load OS funcs.\n");
-+        os_free(p_drv_hal->os_funcs);
-+    }
-+    else if(halCpmacInitModule(&p_drv_hal->hal_dev, p_os_dev,
-+                               &p_drv_hal->hal_funcs, p_drv_hal->os_funcs, 
-+                               sizeof(*p_drv_hal->os_funcs),
-+                               &hal_func_size, inst) != 0)
-+    {
-+        errPrint("halCpmacInitModule failed for inst %d \n", inst);
-+        os_free(p_drv_hal->os_funcs);
-+    }
-+    else if(p_drv_hal->hal_funcs->Probe(p_drv_hal->hal_dev) != 0)
-+    {
-+        errPrint("halCpmacProbe failed for inst %d \n", inst);       
-+        os_free(p_drv_hal->os_funcs);
-+    }
-+    else
-+    {
-+        /* every thing went well. */
-+        ret_val = 0;
-+    }  
-+
-+    return (ret_val);  
-+}
-diff -urN linux.old/drivers/net/avalanche_cpmac/cpmacHalLx.h linux.dev/drivers/net/avalanche_cpmac/cpmacHalLx.h
---- linux.old/drivers/net/avalanche_cpmac/cpmacHalLx.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cpmacHalLx.h	2005-07-12 02:48:42.044593000 +0200
-@@ -0,0 +1,51 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    CPMAC Linux Device Driver HAL support Header
-+ ******************************************************************************
-+ * FILE NAME:       cpmacHalVx.h
-+ *
-+ * DESCRIPTION:     CPMAC Linux Device Driver Header
-+ *
-+ * REVISION HISTORY:
-+ *
-+ * Date           Description                               Author
-+ *-----------------------------------------------------------------------------
-+ * 27 Nov 2002    Initial Creation                          Suraj S Iyer  
-+ * 09 Jun 2003    Updates for GA                            Suraj S Iyer
-+ * 
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+#ifndef __CPMAC_HAL_LX_H
-+#define __CPMAC_HAL_LX_H
-+
-+
-+typedef struct net_device         OS_DEVICE;
-+typedef struct sk_buff            OS_RECEIVEINFO;
-+typedef struct sk_buff            OS_SENDINFO;
-+
-+#ifdef DEBUG
-+typedef void                      HAL_RECEIVEINFO;
-+typedef void                      HAL_DEVICE;
-+typedef void                      OS_SETUP;
-+#endif
-+
-+#define OS_SETUP   void
-+#define HAL_DEVICE void
-+#define HAL_RECEIVEINFO void
-+
-+#define _CPHAL_CPMAC
-+ 
-+#include "cpswhal_cpmac.h"
-+#include "cpmac.h"
-+
-+int cpmac_drv_start(CPMAC_DRV_HAL_INFO_T *, CPMAC_TX_CHAN_INFO_T*,
-+                    CPMAC_RX_CHAN_INFO_T *, unsigned int);
-+int cpmac_drv_cleanup(CPMAC_DRV_HAL_INFO_T *);
-+int cpmac_drv_init(CPMAC_DRV_HAL_INFO_T*);
-+int cpmac_drv_close(CPMAC_DRV_HAL_INFO_T*);
-+int cpmac_drv_open(CPMAC_DRV_HAL_INFO_T*);
-+int cpmac_drv_init_module(CPMAC_DRV_HAL_INFO_T*, OS_DEVICE*, int);
-+int cpmac_drv_stop(CPMAC_DRV_HAL_INFO_T *p_drv_hal,CPMAC_TX_CHAN_INFO_T *p_tx_chan_info,
-+                   CPMAC_RX_CHAN_INFO_T *p_rx_chan_info,unsigned int flags);
-+
-+#endif
-diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac_reg.h linux.dev/drivers/net/avalanche_cpmac/cpmac_reg.h
---- linux.old/drivers/net/avalanche_cpmac/cpmac_reg.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cpmac_reg.h	2005-07-12 02:48:42.045593000 +0200
-@@ -0,0 +1,406 @@
-+/****************************************************************************
-+        TNETD73xx Software Support
-+        Copyright(c) 2000, Texas Instruments Incorporated. All Rights Reserved.
-+
-+        FILE: cpmac_reg.h   Register definitions for the CPMAC module
-+
-+         DESCRIPTION:
-+                This include file contains register definitions for the
-+                CPMAC module.
-+
-+         HISTORY:
-+              15Nov00 BEGR Original version written
-+              30May02 MICK Added bits for Int Vector
-+              19Sep02 MICK Added INT_ACK per Channel
-+              08Nov02 GDUN Updated to use base
-+              12Nov02 MICK Incorporated into CPHAL 
-+*****************************************************************************/
-+#ifndef _INC_CPMAC_REG
-+#define _INC_CPMAC_REG
-+
-+#ifndef MEM_PTR
-+#define MEM_PTR volatile bit32u *
-+#endif
-+
-+/***************************************************************************
-+ *                                                                         
-+ *         C P M A C  M E M O R Y  M A P 
-+ *                                                                         
-+ **************************************************************************/
-+
-+#define pCPMAC_TX_IDVER(base)                 ((MEM_PTR)(base+0x000))
-+#define  CPMAC_TX_IDVER(base)                 (*pCPMAC_TX_IDVER(base))
-+#define pCPMAC_TX_CONTROL(base)               ((MEM_PTR)(base+0x004))
-+#define  CPMAC_TX_CONTROL(base)               (*pCPMAC_TX_CONTROL(base))
-+#define pCPMAC_TX_TEARDOWN(base)              ((MEM_PTR)(base+0x008))
-+#define  CPMAC_TX_TEARDOWN(base)              (*pCPMAC_TX_TEARDOWN(base))
-+#define pCPMAC_RX_IDVER(base)                 ((MEM_PTR)(base+0x010))
-+#define  CPMAC_RX_IDVER(base)                 (*pCPMAC_RX_IDVER(base))
-+#define pCPMAC_RX_CONTROL(base)               ((MEM_PTR)(base+0x014))
-+#define  CPMAC_RX_CONTROL(base)               (*pCPMAC_RX_CONTROL(base))
-+#define pCPMAC_RX_TEARDOWN(base)              ((MEM_PTR)(base+0x018))
-+#define  CPMAC_RX_TEARDOWN(base)              (*pCPMAC_RX_TEARDOWN(base))
-+#define pCPMAC_RX_MBP_ENABLE(base)            ((MEM_PTR)(base+0x100))
-+#define  CPMAC_RX_MBP_ENABLE(base)            (*pCPMAC_RX_MBP_ENABLE(base))
-+#define pCPMAC_RX_UNICAST_SET(base)           ((MEM_PTR)(base+0x104))
-+#define  CPMAC_RX_UNICAST_SET(base)           (*pCPMAC_RX_UNICAST_SET(base))
-+#define pCPMAC_RX_UNICAST_CLEAR(base)         ((MEM_PTR)(base+0x108))
-+#define  CPMAC_RX_UNICAST_CLEAR(base)         (*pCPMAC_RX_UNICAST_CLEAR(base))
-+#define pCPMAC_RX_MAXLEN(base)                ((MEM_PTR)(base+0x10C))
-+#define  CPMAC_RX_MAXLEN(base)                (*pCPMAC_RX_MAXLEN(base))
-+#define pCPMAC_RX_BUFFER_OFFSET(base)         ((MEM_PTR)(base+0x110))
-+#define  CPMAC_RX_BUFFER_OFFSET(base)         (*pCPMAC_RX_BUFFER_OFFSET(base))
-+#define pCPMAC_RX_FILTERLOWTHRESH(base)       ((MEM_PTR)(base+0x114))
-+#define  CPMAC_RX_FILTERLOWTHRESH(base)       (*pCPMAC_RX_FILTERLOWTHRESH(base))
-+#define pCPMAC_RX0_FLOWTHRESH(base)           ((MEM_PTR)(base+0x120))
-+#define  CPMAC_RX0_FLOWTHRESH(base)           (*pCPMAC_RX0_FLOWTHRESH(base))
-+#define pCPMAC_RX1_FLOWTHRESH(base)           ((MEM_PTR)(base+0x124))
-+#define  CPMAC_RX1_FLOWTHRESH(base)           (*pCPMAC_RX1_FLOWTHRESH(base))
-+#define pCPMAC_RX2_FLOWTHRESH(base)           ((MEM_PTR)(base+0x128))
-+#define  CPMAC_RX2_FLOWTHRESH(base)           (*pCPMAC_RX2_FLOWTHRESH(base))
-+#define pCPMAC_RX3_FLOWTHRESH(base)           ((MEM_PTR)(base+0x12C))
-+#define  CPMAC_RX3_FLOWTHRESH(base)           (*pCPMAC_RX3_FLOWTHRESH(base))
-+#define pCPMAC_RX4_FLOWTHRESH(base)           ((MEM_PTR)(base+0x130))
-+#define  CPMAC_RX4_FLOWTHRESH(base)           (*pCPMAC_RX4_FLOWTHRESH(base))
-+#define pCPMAC_RX5_FLOWTHRESH(base)           ((MEM_PTR)(base+0x134))
-+#define  CPMAC_RX5_FLOWTHRESH(base)           (*pCPMAC_RX5_FLOWTHRESH(base))
-+#define pCPMAC_RX6_FLOWTHRESH(base)           ((MEM_PTR)(base+0x138))
-+#define  CPMAC_RX6_FLOWTHRESH(base)           (*pCPMAC_RX6_FLOWTHRESH(base))
-+#define pCPMAC_RX7_FLOWTHRESH(base)           ((MEM_PTR)(base+0x13C))
-+#define  CPMAC_RX7_FLOWTHRESH(base)           (*pCPMAC_RX7_FLOWTHRESH(base))
-+#define pCPMAC_RX0_FREEBUFFER(base)           ((MEM_PTR)(base+0x140))
-+#define  CPMAC_RX0_FREEBUFFER(base)           (*pCPMAC_RX0_FREEBUFFER(base))
-+#define pCPMAC_RX1_FREEBUFFER(base)           ((MEM_PTR)(base+0x144))
-+#define  CPMAC_RX1_FREEBUFFER(base)           (*pCPMAC_RX1_FREEBUFFER(base))
-+#define pCPMAC_RX2_FREEBUFFER(base)           ((MEM_PTR)(base+0x148))
-+#define  CPMAC_RX2_FREEBUFFER(base)           (*pCPMAC_RX2_FREEBUFFER(base))
-+#define pCPMAC_RX3_FREEBUFFER(base)           ((MEM_PTR)(base+0x14C))
-+#define  CPMAC_RX3_FREEBUFFER(base)           (*pCPMAC_RX3_FREEBUFFER(base))
-+#define pCPMAC_RX4_FREEBUFFER(base)           ((MEM_PTR)(base+0x150))
-+#define  CPMAC_RX4_FREEBUFFER(base)           (*pCPMAC_RX4_FREEBUFFER(base))
-+#define pCPMAC_RX5_FREEBUFFER(base)           ((MEM_PTR)(base+0x154))
-+#define  CPMAC_RX5_FREEBUFFER(base)           (*pCPMAC_RX5_FREEBUFFER(base))
-+#define pCPMAC_RX6_FREEBUFFER(base)           ((MEM_PTR)(base+0x158))
-+#define  CPMAC_RX6_FREEBUFFER(base)           (*pCPMAC_RX6_FREEBUFFER(base))
-+#define pCPMAC_RX7_FREEBUFFER(base)           ((MEM_PTR)(base+0x15C))
-+#define  CPMAC_RX7_FREEBUFFER(base)           (*pCPMAC_RX7_FREEBUFFER(base))
-+#define pCPMAC_MACCONTROL(base)               ((MEM_PTR)(base+0x160))
-+#define  CPMAC_MACCONTROL(base)               (*pCPMAC_MACCONTROL(base))
-+#define pCPMAC_MACSTATUS(base)                ((MEM_PTR)(base+0x164))
-+#define  CPMAC_MACSTATUS(base)                (*pCPMAC_MACSTATUS(base))
-+#define pCPMAC_EMCONTROL(base)                ((MEM_PTR)(base+0x168))
-+#define  CPMAC_EMCONTROL(base)                (*pCPMAC_EMCONTROL(base))
-+#define pCPMAC_TX_INTSTAT_RAW(base)           ((MEM_PTR)(base+0x170))
-+#define  CPMAC_TX_INTSTAT_RAW(base)           (*pCPMAC_TX_INTSTAT_RAW(base))
-+#define pCPMAC_TX_INTSTAT_MASKED(base)        ((MEM_PTR)(base+0x174))
-+#define  CPMAC_TX_INTSTAT_MASKED(base)        (*pCPMAC_TX_INTSTAT_MASKED(base))
-+#define pCPMAC_TX_INTMASK_SET(base)           ((MEM_PTR)(base+0x178))
-+#define  CPMAC_TX_INTMASK_SET(base)           (*pCPMAC_TX_INTMASK_SET(base))
-+#define pCPMAC_TX_INTMASK_CLEAR(base)         ((MEM_PTR)(base+0x17C))
-+#define  CPMAC_TX_INTMASK_CLEAR(base)         (*pCPMAC_TX_INTMASK_CLEAR(base))
-+#define pCPMAC_MAC_IN_VECTOR(base)            ((MEM_PTR)(base+0x180))
-+#define  CPMAC_MAC_IN_VECTOR(base)            (*pCPMAC_MAC_IN_VECTOR(base))
-+#define pCPMAC_MAC_EOI_VECTOR(base)           ((MEM_PTR)(base+0x184))
-+#define  CPMAC_MAC_EOI_VECTOR(base)           (*pCPMAC_MAC_EOI_VECTOR(base))
-+#define pCPMAC_RX_INTSTAT_RAW(base)           ((MEM_PTR)(base+0x190))
-+#define  CPMAC_RX_INTSTAT_RAW(base)           (*pCPMAC_RX_INTSTAT_RAW(base))
-+#define pCPMAC_RX_INTSTAT_MASKED(base)        ((MEM_PTR)(base+0x194))
-+#define  CPMAC_RX_INTSTAT_MASKED(base)        (*pCPMAC_RX_INTSTAT_MASKED(base))
-+#define pCPMAC_RX_INTMASK_SET(base)           ((MEM_PTR)(base+0x198))
-+#define  CPMAC_RX_INTMASK_SET(base)           (*pCPMAC_RX_INTMASK_SET(base))
-+#define pCPMAC_RX_INTMASK_CLEAR(base)         ((MEM_PTR)(base+0x19C))
-+#define  CPMAC_RX_INTMASK_CLEAR(base)         (*pCPMAC_RX_INTMASK_CLEAR(base))
-+#define pCPMAC_MAC_INTSTAT_RAW(base)          ((MEM_PTR)(base+0x1A0))
-+#define  CPMAC_MAC_INTSTAT_RAW(base)          (*pCPMAC_MAC_INTSTAT_RAW(base))
-+#define pCPMAC_MAC_INTSTAT_MASKED(base)       ((MEM_PTR)(base+0x1A4))
-+#define  CPMAC_MAC_INTSTAT_MASKED(base)       (*pCPMAC_MAC_INTSTAT_MASKED(base))
-+#define pCPMAC_MAC_INTMASK_SET(base)          ((MEM_PTR)(base+0x1A8))
-+#define  CPMAC_MAC_INTMASK_SET(base)          (*pCPMAC_MAC_INTMASK_SET(base))
-+#define pCPMAC_MAC_INTMASK_CLEAR(base)        ((MEM_PTR)(base+0x1AC))
-+#define  CPMAC_MAC_INTMASK_CLEAR(base)        (*pCPMAC_MAC_INTMASK_CLEAR(base))
-+#define pCPMAC_MACADDRLO_0(base)              ((MEM_PTR)(base+0x1B0))
-+#define  CPMAC_MACADDRLO_0(base)              (*pCPMAC_MACADDRLO_0(base))
-+#define pCPMAC_MACADDRLO_1(base)              ((MEM_PTR)(base+0x1B4))
-+#define  CPMAC_MACADDRLO_1(base)              (*pCPMAC_MACADDRLO_1(base))
-+#define pCPMAC_MACADDRLO_2(base)              ((MEM_PTR)(base+0x1B8))
-+#define  CPMAC_MACADDRLO_2(base)              (*pCPMAC_MACADDRLO_2(base))
-+#define pCPMAC_MACADDRLO_3(base)              ((MEM_PTR)(base+0x1BC))
-+#define  CPMAC_MACADDRLO_3(base)              (*pCPMAC_MACADDRLO_3(base))
-+#define pCPMAC_MACADDRLO_4(base)              ((MEM_PTR)(base+0x1C0))
-+#define  CPMAC_MACADDRLO_4(base)              (*pCPMAC_MACADDRLO_4(base))
-+#define pCPMAC_MACADDRLO_5(base)              ((MEM_PTR)(base+0x1C4))
-+#define  CPMAC_MACADDRLO_5(base)              (*pCPMAC_MACADDRLO_5(base))
-+#define pCPMAC_MACADDRLO_6(base)              ((MEM_PTR)(base+0x1C8))
-+#define  CPMAC_MACADDRLO_6(base)              (*pCPMAC_MACADDRLO_6(base))
-+#define pCPMAC_MACADDRLO_7(base)              ((MEM_PTR)(base+0x1CC))
-+#define  CPMAC_MACADDRLO_7(base)              (*pCPMAC_MACADDRLO_7(base))
-+#define pCPMAC_MACADDRMID(base)               ((MEM_PTR)(base+0x1D0))
-+#define  CPMAC_MACADDRMID(base)               (*pCPMAC_MACADDRMID(base))
-+#define pCPMAC_MACADDRHI(base)                ((MEM_PTR)(base+0x1D4))
-+#define  CPMAC_MACADDRHI(base)                (*pCPMAC_MACADDRHI(base))
-+#define pCPMAC_MACHASH1(base)                 ((MEM_PTR)(base+0x1D8))
-+#define  CPMAC_MACHASH1(base)                 (*pCPMAC_MACHASH1(base))
-+#define pCPMAC_MACHASH2(base)                 ((MEM_PTR)(base+0x1DC))
-+#define  CPMAC_MACHASH2(base)                 (*pCPMAC_MACHASH2(base))
-+#define pCPMAC_BOFFTEST(base)                 ((MEM_PTR)(base+0x1E0))
-+#define  CPMAC_BOFFTEST(base)                 (*pCPMAC_BOFFTEST(base))
-+#define pCPMAC_PACTEST(base)                  ((MEM_PTR)(base+0x1E4))
-+#define  CPMAC_PACTEST(base)                  (*pCPMAC_PACTEST(base))
-+#define pCPMAC_RXPAUSE(base)                  ((MEM_PTR)(base+0x1E8))
-+#define  CPMAC_RXPAUSE(base)                  (*pCPMAC_RXPAUSE(base))
-+#define pCPMAC_TXPAUSE(base)                  ((MEM_PTR)(base+0x1EC))
-+#define  CPMAC_TXPAUSE(base)                  (*pCPMAC_TXPAUSE(base))
-+/* STATISTICS */
-+#define pCPMAC_RXGOODFRAMES(base)             ((MEM_PTR)(base+0x200))
-+#define  CPMAC_RXGOODFRAMES(base)             (*pCPMAC_RXGOODFRAMES(base))
-+#define pCPMAC_RXBROADCASTFRAMES(base)        ((MEM_PTR)(base+0x204))
-+#define  CPMAC_RXBROADCASTFRAMES(base)        (*pCPMAC_RXBROADCASTFRAMES(base))
-+#define pCPMAC_RXMULTICASTFRAMES(base)        ((MEM_PTR)(base+0x208))
-+#define  CPMAC_RXMULTICASTFRAMES(base)        (*pCPMAC_RXMULTICASTFRAMES(base))
-+#define pCPMAC_RXPAUSEFRAMES(base)            ((MEM_PTR)(base+0x20C))
-+#define   CPMAC_RXPAUSEFRAMES(base)           (*pCPMAC_RXPAUSEFRAMES(base))
-+#define pCPMAC_RXCRCERRORS(base)              ((MEM_PTR)(base+0x210))
-+#define   CPMAC_RXCRCERRORS(base)             (*pCPMAC_RXCRCERRORS(base))
-+#define pCPMAC_RXALIGNCODEERRORS(base)        ((MEM_PTR)(base+0x214))
-+#define   CPMAC_RXALIGNCODEERRORS(base)       (*pCPMAC_RXALIGNCODEERRORS(base))
-+#define pCPMAC_RXOVERSIZEDFRAMES(base)        ((MEM_PTR)(base+0x218))
-+#define   CPMAC_RXOVERSIZEDFRAMES(base)       (*pCPMAC_RXOVERSIZEDFRAMES(base))
-+#define pCPMAC_RXJABBERFRAMES(base)           ((MEM_PTR)(base+0x21C))
-+#define  CPMAC_RXJABBERFRAMES(base)           (*pCPMAC_RXJABBERFRAMES(base))
-+#define pCPMAC_RXUNDERSIZEDFRAMES(base)       ((MEM_PTR)(base+0x220))
-+#define  CPMAC_RXUNDERSIZEDFRAMES(base)       (*pCPMAC_RXUNDERSIZEDFRAMES(base))
-+#define pCPMAC_RXFRAGMENTS(base)              ((MEM_PTR)(base+0x224))
-+#define  CPMAC_RXFRAGMENTS(base)              (*pCPMAC_RXFRAGMENTS(base))
-+#define pCPMAC_RXFILTEREDFRAMES(base)         ((MEM_PTR)(base+0x228))
-+#define  CPMAC_RXFILTEREDFRAMES(base)         (*pCPMAC_RXFILTEREDFRAMES(base))
-+#define pCPMAC_RXQOSFILTEREDFRAMES(base)      ((MEM_PTR)(base+0x22C))
-+#define  CPMAC_RXQOSFILTEREDFRAMES(base)      (*pCPMAC_RXQOSFILTEREDFRAMES(base))
-+#define pCPMAC_RXOCTETS(base)                 ((MEM_PTR)(base+0x230))
-+#define  CPMAC_RXOCTETS(base)                 (*pCPMAC_RXOCTETS(base))
-+#define pCPMAC_TXGOODFRAMES(base)             ((MEM_PTR)(base+0x234))
-+#define  CPMAC_TXGOODFRAMES(base)             (*pCPMAC_TXGOODFRAMES(base))
-+#define pCPMAC_TXBROADCASTFRAMES(base)        ((MEM_PTR)(base+0x238))
-+#define  CPMAC_TXBROADCASTFRAMES(base)        (*pCPMAC_TXBROADCASTFRAMES(base))
-+#define pCPMAC_TXMULTICASTFRAMES(base)        ((MEM_PTR)(base+0x23C))
-+#define  CPMAC_TXMULTICASTFRAMES(base)        (*pCPMAC_TXMULTICASTFRAMES(base))
-+#define pCPMAC_TXPAUSEFRAMES(base)            ((MEM_PTR)(base+0x240))
-+#define  CPMAC_TXPAUSEFRAMES(base)            (*pCPMAC_TXPAUSEFRAMES(base))
-+#define pCPMAC_TXDEFERREDFRAMES(base)         ((MEM_PTR)(base+0x244))
-+#define  CPMAC_TXDEFERREDFRAMES(base)         (*pCPMAC_TXDEFERREDFRAMES(base))
-+#define pCPMAC_TXCOLLISIONFRAMES(base)        ((MEM_PTR)(base+0x248))
-+#define  CPMAC_TXCOLLISIONFRAMES(base)        (*pCPMAC_TXCOLLISIONFRAMES(base))
-+#define pCPMAC_TXSINGLECOLLFRAMES(base)       ((MEM_PTR)(base+0x24C))
-+#define  CPMAC_TXSINGLECOLLFRAMES(base)       (*pCPMAC_TXSINGLECOLLFRAMES(base))
-+#define pCPMAC_TXMULTCOLLFRAMES(base)         ((MEM_PTR)(base+0x250))
-+#define  CPMAC_TXMULTCOLLFRAMES(base)         (*pCPMAC_TXMULTCOLLFRAMES(base))
-+#define pCPMAC_TXEXCESSIVECOLLISIONS(base)    ((MEM_PTR)(base+0x254))
-+#define  CPMAC_TXEXCESSIVECOLLISIONS(base)    (*pCPMAC_TXEXCESSIVECOLLISIONS(base))
-+#define pCPMAC_TXLATECOLLISIONS(base)         ((MEM_PTR)(base+0x258))
-+#define  CPMAC_TXLATECOLLISIONS(base)         (*pCPMAC_TXLATECOLLISIONS(base))
-+#define pCPMAC_TXUNDERRUN(base)               ((MEM_PTR)(base+0x25C))
-+#define  CPMAC_TXUNDERRUN(base)               (*pCPMAC_TXUNDERRUN(base))
-+#define pCPMAC_TXCARRIERSENSEERRORS(base)     ((MEM_PTR)(base+0x260))
-+#define  CPMAC_TXCARRIERSENSEERRORS(base)     (*pCPMAC_TXCARRIERSENSEERRORS(base))
-+#define pCPMAC_TXOCTETS(base)                 ((MEM_PTR)(base+0x264))
-+#define  CPMAC_TXOCTETS(base)                 (*pCPMAC_TXOCTETS(base))
-+#define pCPMAC_64OCTETFRAMES(base)            ((MEM_PTR)(base+0x268))
-+#define  CPMAC_64OCTETFRAMES(base)            (*pCPMAC_64OCTETFRAMES(base))
-+#define pCPMAC_65T127OCTETFRAMES(base)        ((MEM_PTR)(base+0x26C))
-+#define  CPMAC_65T127OCTETFRAMES(base)        (*pCPMAC_65T127OCTETFRAMES(base))
-+#define pCPMAC_128T255OCTETFRAMES(base)       ((MEM_PTR)(base+0x270))
-+#define  CPMAC_128T255OCTETFRAMES(base)       (*pCPMAC_128T255OCTETFRAMES(base))
-+#define pCPMAC_256T511OCTETFRAMES(base)       ((MEM_PTR)(base+0x274))
-+#define  CPMAC_256T511OCTETFRAMES(base)       (*pCPMAC_256T511OCTETFRAMES(base))
-+#define pCPMAC_512T1023OCTETFRAMES(base)      ((MEM_PTR)(base+0x278))
-+#define  CPMAC_512T1023OCTETFRAMES(base)      (*pCPMAC_512T1023OCTETFRAMES(base))
-+#define pCPMAC_1024TUPOCTETFRAMES(base)       ((MEM_PTR)(base+0x27C))
-+#define  CPMAC_1024TUPOCTETFRAMES(base)       (*pCPMAC_1024TUPOCTETFRAMES(base))
-+#define pCPMAC_NETOCTETS(base)                ((MEM_PTR)(base+0x280))
-+#define  CPMAC_NETOCTETS(base)                (*pCPMAC_NETOCTETS(base))
-+#define pCPMAC_RXSOFOVERRUNS(base)            ((MEM_PTR)(base+0x284))
-+#define  CPMAC_RXSOFOVERRUNS(base)            (*pCPMAC_RXSOFOVERRUNS(base))
-+#define pCPMAC_RXMOFOVERRUNS(base)            ((MEM_PTR)(base+0x288))
-+#define  CPMAC_RXMOFOVERRUNS(base)            (*pCPMAC_RXMOFOVERRUNS(base))
-+#define pCPMAC_RXDMAOVERRUNS(base)            ((MEM_PTR)(base+0x28C))
-+#define  CPMAC_RXDMAOVERRUNS(base)            (*pCPMAC_RXDMAOVERRUNS(base))
-+
-+#define  CPMAC_TX_HDP(base,ch)                (*(MEM_PTR)(base+0x600+(4*ch)))
-+#define pCPMAC_TX0_HDP(base)                  ((MEM_PTR)(base+0x600))
-+#define  CPMAC_TX0_HDP(base)                  (*pCPMAC_TX0_HDP(base))
-+#define pCPMAC_TX1_HDP(base)                  ((MEM_PTR)(base+0x604))
-+#define  CPMAC_TX1_HDP(base)                  (*pCPMAC_TX1_HDP(base))
-+#define pCPMAC_TX2_HDP(base)                  ((MEM_PTR)(base+0x608))
-+#define  CPMAC_TX2_HDP(base)                  (*pCPMAC_TX2_HDP(base))
-+#define pCPMAC_TX3_HDP(base)                  ((MEM_PTR)(base+0x60C))
-+#define  CPMAC_TX3_HDP(base)                  (*pCPMAC_TX3_HDP(base))
-+#define pCPMAC_TX4_HDP(base)                  ((MEM_PTR)(base+0x610))
-+#define  CPMAC_TX4_HDP(base)                  (*pCPMAC_TX4_HDP(base))
-+#define pCPMAC_TX5_HDP(base)                  ((MEM_PTR)(base+0x614))
-+#define  CPMAC_TX5_HDP(base)                  (*pCPMAC_TX5_HDP(base))
-+#define pCPMAC_TX6_HDP(base)                  ((MEM_PTR)(base+0x618))
-+#define  CPMAC_TX6_HDP(base)                  (*pCPMAC_TX6_HDP(base))
-+#define pCPMAC_TX7_HDP(base)                  ((MEM_PTR)(base+0x61C))
-+#define  CPMAC_TX7_HDP(base)                  (*pCPMAC_TX7_HDP(base))
-+#define  CPMAC_RX_HDP(base,ch)                (*(MEM_PTR)(base+0x620+(4*ch)))
-+#define pCPMAC_RX0_HDP(base)                  ((MEM_PTR)(base+0x620))
-+#define  CPMAC_RX0_HDP(base)                  (*pCPMAC_RX0_HDP(base))
-+#define pCPMAC_RX1_HDP(base)                  ((MEM_PTR)(base+0x624))
-+#define  CPMAC_RX1_HDP(base)                  (*pCPMAC_RX1_HDP(base))
-+#define pCPMAC_RX2_HDP(base)                  ((MEM_PTR)(base+0x628))
-+#define  CPMAC_RX2_HDP(base)                  (*pCPMAC_RX2_HDP(base))
-+#define pCPMAC_RX3_HDP(base)                  ((MEM_PTR)(base+0x62C))
-+#define  CPMAC_RX3_HDP(base)                  (*pCPMAC_RX3_HDP(base))
-+#define pCPMAC_RX4_HDP(base)                  ((MEM_PTR)(base+0x630))
-+#define  CPMAC_RX4_HDP(base)                  (*pCPMAC_RX4_HDP(base))
-+#define pCPMAC_RX5_HDP(base)                  ((MEM_PTR)(base+0x634))
-+#define  CPMAC_RX5_HDP(base)                  (*pCPMAC_RX5_HDP(base))
-+#define pCPMAC_RX6_HDP(base)                  ((MEM_PTR)(base+0x638))
-+#define  CPMAC_RX6_HDP(base)                  (*pCPMAC_RX6_HDP(base))
-+#define pCPMAC_RX7_HDP(base)                  ((MEM_PTR)(base+0x63C))
-+#define  CPMAC_RX7_HDP(base)                  (*pCPMAC_RX7_HDP(base))
-+
-+
-+#define CPMAC_TX_INT_ACK(base,ch)             (*(MEM_PTR)(base+0x640+(4*ch)))
-+
-+#define pCPMAC_TX0_INT_ACK(base)              ((MEM_PTR)(base+0x640))
-+#define  CPMAC_TX0_INT_ACK(base)              (*pCPMAC_TX0_INT_ACK(base))
-+#define pCPMAC_TX1_INT_ACK(base)              ((MEM_PTR)(base+0x644))
-+#define  CPMAC_TX1_INT_ACK(base)              (*pCPMAC_TX1_INT_ACK(base))
-+#define pCPMAC_TX2_INT_ACK(base)              ((MEM_PTR)(base+0x648))
-+#define  CPMAC_TX2_INT_ACK(base)              (*pCPMAC_TX2_INT_ACK(base))
-+#define pCPMAC_TX3_INT_ACK(base)              ((MEM_PTR)(base+0x64C))
-+#define  CPMAC_TX3_INT_ACK(base)              (*pCPMAC_TX3_INT_ACK(base))
-+#define pCPMAC_TX4_INT_ACK(base)              ((MEM_PTR)(base+0x650))
-+#define  CPMAC_TX4_INT_ACK(base)              (*pCPMAC_TX4_INT_ACK(base))
-+#define pCPMAC_TX5_INT_ACK(base)              ((MEM_PTR)(base+0x654))
-+#define  CPMAC_TX5_INT_ACK(base)              (*pCPMAC_TX5_INT_ACK(base))
-+#define pCPMAC_TX6_INT_ACK(base)              ((MEM_PTR)(base+0x658))
-+#define  CPMAC_TX6_INT_ACK(base)              (*pCPMAC_TX6_INT_ACK(base))
-+#define pCPMAC_TX7_INT_ACK(base)              ((MEM_PTR)(base+0x65C))
-+#define  CPMAC_TX7_INT_ACK(base)              (*pCPMAC_TX7_INT_ACK(base))
-+#define CPMAC_RX_INT_ACK(base,ch)             (*(MEM_PTR)(base+0x660+(4*ch)))
-+         
-+#define pCPMAC_RX0_INT_ACK(base)              ((MEM_PTR)(base+0x660))
-+#define  CPMAC_RX0_INT_ACK(base)              (*pCPMAC_RX0_INT_ACK(base))
-+#define pCPMAC_RX1_INT_ACK(base)              ((MEM_PTR)(base+0x664))
-+#define  CPMAC_RX1_INT_ACK(base)              (*pCPMAC_RX1_INT_ACK(base))
-+#define pCPMAC_RX2_INT_ACK(base)              ((MEM_PTR)(base+0x668))
-+#define  CPMAC_RX2_INT_ACK(base)              (*pCPMAC_RX2_INT_ACK(base))
-+#define pCPMAC_RX3_INT_ACK(base)              ((MEM_PTR)(base+0x66C))
-+#define  CPMAC_RX3_INT_ACK(base)              (*pCPMAC_RX3_INT_ACK(base))
-+#define pCPMAC_RX4_INT_ACK(base)              ((MEM_PTR)(base+0x670))
-+#define  CPMAC_RX4_INT_ACK(base)              (*pCPMAC_RX4_INT_ACK(base))
-+#define pCPMAC_RX5_INT_ACK(base)              ((MEM_PTR)(base+0x674))
-+#define  CPMAC_RX5_INT_ACK(base)              (*pCPMAC_RX5_INT_ACK(base))
-+#define pCPMAC_RX6_INT_ACK(base)              ((MEM_PTR)(base+0x678))
-+#define  CPMAC_RX6_INT_ACK(base)              (*pCPMAC_RX6_INT_ACK(base))
-+#define pCPMAC_RX7_INT_ACK(base)              ((MEM_PTR)(base+0x67C))
-+#define  CPMAC_RX7_INT_ACK(base)              (*pCPMAC_RX7_INT_ACK(base))
-+
-+/****************************************************************************/
-+/*                                                                          */
-+/*         R E G I S T E R  B I T  D E F I N I T I O N S                    */
-+/*                                                                          */
-+/****************************************************************************/
-+
-+/* TX_CONTROL */
-+
-+#define TX_EN               (1 << 0)
-+
-+/* RX_CONTROL */
-+
-+#define RX_EN               (1 << 0)
-+
-+/* RX_MBP_ENABLE */
-+
-+#define RX_PASS_CRC         (1 << 30)
-+#define RX_QOS_EN           (1 << 29)
-+#define RX_NO_CHAIN         (1 << 28)
-+
-+#define RX_CMF_EN           (1 << 24)
-+#define RX_CSF_EN           (1 << 23)
-+#define RX_CEF_EN           (1 << 22)
-+#define RX_CAF_EN           (1 << 21)
-+
-+#define RX_PROM_CH(n)       (n << 16)
-+#define RX_PROM_CH_MASK     RX_PROM_CH(7)
-+#define RX_PROM_CH_7        RX_PROM_CH(7)
-+#define RX_PROM_CH_6        RX_PROM_CH(6)
-+#define RX_PROM_CH_5        RX_PROM_CH(5)
-+#define RX_PROM_CH_4        RX_PROM_CH(4)
-+#define RX_PROM_CH_3        RX_PROM_CH(3)
-+#define RX_PROM_CH_2        RX_PROM_CH(2)
-+#define RX_PROM_CH_1        RX_PROM_CH(1)
-+#define RX_PROM_CH_0        RX_PROM_CH(0)
-+
-+#define RX_BROAD_EN         (1 << 13)
-+
-+#define RX_BROAD_CH(n)       (n <<  8)
-+#define RX_BROAD_CH_MASK     RX_BROAD_CH(7)
-+#define RX_BROAD_CH_7        RX_BROAD_CH(7)
-+#define RX_BROAD_CH_6        RX_BROAD_CH(6)
-+#define RX_BROAD_CH_5        RX_BROAD_CH(5)
-+#define RX_BROAD_CH_4        RX_BROAD_CH(4)
-+#define RX_BROAD_CH_3        RX_BROAD_CH(3)
-+#define RX_BROAD_CH_2        RX_BROAD_CH(2)
-+#define RX_BROAD_CH_1        RX_BROAD_CH(1)
-+#define RX_BROAD_CH_0        RX_BROAD_CH(0)
-+
-+#define RX_MULT_EN          (1 <<  5)
-+
-+#define RX_MULT_CH(n)       (n << 0)
-+#define RX_MULT_CH_MASK     RX_MULT_CH(7)
-+#define RX_MULT_CH_7        RX_MULT_CH(7)
-+#define RX_MULT_CH_6        RX_MULT_CH(6)
-+#define RX_MULT_CH_5        RX_MULT_CH(5)
-+#define RX_MULT_CH_4        RX_MULT_CH(4)
-+#define RX_MULT_CH_3        RX_MULT_CH(3)
-+#define RX_MULT_CH_2        RX_MULT_CH(2)
-+#define RX_MULT_CH_1        RX_MULT_CH(1)
-+#define RX_MULT_CH_0        RX_MULT_CH(0)
-+
-+
-+
-+/* RX_UNICAST_SET */
-+
-+#define RX_CH7_EN        (1 <<  7)
-+#define RX_CH6_EN        (1 <<  6)
-+#define RX_CH5_EN        (1 <<  5)
-+#define RX_CH4_EN        (1 <<  4)
-+#define RX_CH3_EN        (1 <<  3)
-+#define RX_CH2_EN        (1 <<  2)
-+#define RX_CH1_EN        (1 <<  1)
-+#define RX_CH0_EN        (1 <<  0)
-+
-+
-+
-+/*  MAC control */
-+#define TX_PTYPE         (1 << 9)
-+#define TX_PACE          (1 << 6)
-+#define MII_EN           (1 << 5)
-+#define TX_FLOW_EN       (1 << 4)
-+#define RX_FLOW_EN       (1 << 3)
-+#define MTEST            (1 << 2)
-+#define CTRL_LOOPBACK    (1 << 1)
-+#define FULLDUPLEX       (1 << 0)
-+
-+
-+/* IntVec definitions  */
-+#define MAC_IN_VECTOR_STATUS_INT   (1 << 19)
-+#define MAC_IN_VECTOR_HOST_INT     (1 << 18)
-+#define MAC_IN_VECTOR_RX_INT_OR    (1 << 17)
-+#define MAC_IN_VECTOR_TX_INT_OR    (1 << 16)
-+#define MAC_IN_VECTOR_RX_INT_VEC   (7 << 8)
-+#define MAC_IN_VECTOR_TX_INT_VEC   (7)  
-+
-+
-+/*  MacStatus */
-+
-+#define TX_HOST_ERR_CODE         (0xF << 20)
-+#define TX_ERR_CH                (0x7 << 16)
-+#define RX_HOST_ERR_CODE         (0xF << 12)
-+#define RX_ERR_CH                (0x7 <<  8)
-+#define RX_QOS_ACT               (1 << 2)
-+#define RX_FLOW_ACT              (1 << 1)
-+#define TX_FLOW_ACT              (1 << 0)
-+#endif _INC_CPMAC_REG
-diff -urN linux.old/drivers/net/avalanche_cpmac/cpmdio.c linux.dev/drivers/net/avalanche_cpmac/cpmdio.c
---- linux.old/drivers/net/avalanche_cpmac/cpmdio.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cpmdio.c	2005-07-12 02:48:42.046593000 +0200
-@@ -0,0 +1,960 @@
-+/***************************************************************************
-+**  TNETD53xx Software Support
-+**  Copyright(c) 2002, Texas Instruments Incorporated. All Rights Reserved.
-+**
-+**  FILE: cpmdio.c
-+**
-+**  DESCRIPTION:
-+**   MDIO Polling State Machine API. Functions will enable mii-Phy
-+**   negotiation.
-+**
-+**  HISTORY:
-+**    01Jan01 Denis, Bill      Original
-+**      27Mar02 Michael Hanrahan (modified from emacmdio.c)
-+**      07May02 Michael Hanrahan replaced clockwait for code delay
-+**      10Jul02 Michael Hanrahan more debug, if fallback link is selected
-+*****************************************************************************/
-+#define __CPHAL_CPMDIO
-+
-+#include "mdio_reg.h"
-+
-+#ifdef _CPHAL_CPMAC
-+#define mdioPrintf PhyDev->HalDev->OsFunc->Printf
-+#else
-+#define mdioPrintf printf
-+#endif
-+
-+typedef struct _phy_device
-+{
-+   bit32u miibase;
-+   bit32u inst;
-+   bit32u PhyState;
-+   bit32u MdixMask;
-+   bit32u PhyMask;
-+   bit32u MLinkMask;
-+   bit32u PhyMode;
-+#ifdef _CPHAL_CPMAC
-+   HAL_DEVICE *HalDev;
-+#endif
-+} _PHY_DEVICE;
-+
-+static void   _mdioDelayEmulate(PHY_DEVICE *PhyDev, int ClockWait);
-+static void   _mdioWaitForAccessComplete(PHY_DEVICE *PhyDev);
-+static void   _mdioUserAccess(PHY_DEVICE *PhyDev, bit32u method, bit32u regadr, bit32u phyadr, bit32u data);
-+static bit32u _mdioUserAccessRead(PHY_DEVICE *PhyDev, bit32u regadr, bit32u phyadr);
-+static void   _mdioUserAccessWrite(PHY_DEVICE *PhyDev, bit32u regadr, bit32u phyadr, bit32u data);
-+
-+static void _mdioDisablePhy(PHY_DEVICE *PhyDev,bit32u PhyNum);
-+static void _mdioPhyTimeOut(PHY_DEVICE *PhyDev);
-+static void _mdioResetPhy(PHY_DEVICE *PhyDev,bit32u PhyNum);
-+
-+static void _mdioDumpPhy(PHY_DEVICE *PhyDev, bit32u p);
-+static void _mdioDumpState(PHY_DEVICE *PhyDev);
-+
-+/* Auto Mdix */
-+static void _mdioMdixDelay(PHY_DEVICE *PhyDev);
-+static int  _mdioMdixSupported(PHY_DEVICE *PhyDev);
-+
-+static void _MdioDefaultState  (PHY_DEVICE *PhyDev);
-+static void _MdioFindingState  (PHY_DEVICE *PhyDev);
-+static void _MdioFoundState    (PHY_DEVICE *PhyDev);
-+static void _MdioInitState     (PHY_DEVICE *PhyDev);
-+static void _MdioLinkedState   (PHY_DEVICE *PhyDev);
-+static void _MdioLinkWaitState (PHY_DEVICE *PhyDev);
-+static void _MdioLoopbackState (PHY_DEVICE *PhyDev);
-+static void _MdioNwayStartState(PHY_DEVICE *PhyDev);
-+static void _MdioNwayWaitState (PHY_DEVICE *PhyDev);
-+
-+
-+
-+#ifndef TRUE
-+#define TRUE (1==1)
-+#endif
-+
-+#ifndef FALSE
-+#define FALSE (1==2)
-+#endif
-+
-+#define PHY_NOT_FOUND  0xFFFF    /*  Used in Phy Detection */
-+
-+/*PhyState breakout                                                          */
-+
-+#define PHY_DEV_OFFSET      (0)
-+#define PHY_DEV_SIZE        (5)        /*  5 Bits used */
-+#define PHY_DEV_MASK        (0x1f<<PHY_DEV_OFFSET)
-+
-+#define PHY_STATE_OFFSET    (PHY_DEV_SIZE+PHY_DEV_OFFSET)
-+#define PHY_STATE_SIZE      (5)        /* 10 Bits used */
-+#define PHY_STATE_MASK      (0x1f<<PHY_STATE_OFFSET)
-+  #define INIT       (1<<PHY_STATE_OFFSET)
-+  #define FINDING    (2<<PHY_STATE_OFFSET)
-+  #define FOUND      (3<<PHY_STATE_OFFSET)
-+  #define NWAY_START (4<<PHY_STATE_OFFSET)
-+  #define NWAY_WAIT  (5<<PHY_STATE_OFFSET)
-+  #define LINK_WAIT  (6<<PHY_STATE_OFFSET)
-+  #define LINKED     (7<<PHY_STATE_OFFSET)
-+  #define LOOPBACK   (8<<PHY_STATE_OFFSET)
-+
-+#define PHY_SPEED_OFFSET    (PHY_STATE_OFFSET+PHY_STATE_SIZE)
-+#define PHY_SPEED_SIZE      (1)     /* 11 Bits used */
-+#define PHY_SPEED_MASK      (1<<PHY_SPEED_OFFSET)
-+
-+#define PHY_DUPLEX_OFFSET   (PHY_SPEED_OFFSET+PHY_SPEED_SIZE)
-+#define PHY_DUPLEX_SIZE     (1)     /* 12 Bits used */
-+#define PHY_DUPLEX_MASK     (1<<PHY_DUPLEX_OFFSET)
-+
-+#define PHY_TIM_OFFSET      (PHY_DUPLEX_OFFSET+PHY_DUPLEX_SIZE)
-+#define PHY_TIM_SIZE        (10)    /* 22 Bits used */
-+#define PHY_TIM_MASK        (0x3ff<<PHY_TIM_OFFSET)
-+  #define PHY_FIND_TO (  2<<PHY_TIM_OFFSET)
-+  #define PHY_RECK_TO (200<<PHY_TIM_OFFSET)
-+  #define PHY_LINK_TO (500<<PHY_TIM_OFFSET)
-+  #define PHY_NWST_TO (500<<PHY_TIM_OFFSET)
-+  #define PHY_NWDN_TO (800<<PHY_TIM_OFFSET)
-+  #define PHY_MDIX_TO (274<<PHY_TIM_OFFSET) /* 2.74 Seconds <--Spec and empirical */
-+
-+#define PHY_SMODE_OFFSET    (PHY_TIM_OFFSET+PHY_TIM_SIZE)
-+#define PHY_SMODE_SIZE      (5)     /* 27 Bits used */
-+#define PHY_SMODE_MASK      (0x1f<<PHY_SMODE_OFFSET)
-+  #define SMODE_AUTO   (0x10<<PHY_SMODE_OFFSET)
-+  #define SMODE_FD100  (0x08<<PHY_SMODE_OFFSET)
-+  #define SMODE_HD100  (0x04<<PHY_SMODE_OFFSET)
-+  #define SMODE_FD10   (0x02<<PHY_SMODE_OFFSET)
-+  #define SMODE_HD10   (0x01<<PHY_SMODE_OFFSET)
-+  #define SMODE_ALL    (0x1f<<PHY_SMODE_OFFSET)
-+
-+#define PHY_CHNG_OFFSET    (PHY_SMODE_OFFSET+PHY_SMODE_SIZE)
-+#define PHY_CHNG_SIZE      (1)     /* 28 Bits used */
-+#define PHY_CHNG_MASK      (1<<PHY_CHNG_OFFSET)
-+  #define PHY_CHANGE (1<<PHY_CHNG_OFFSET)
-+
-+#define PHY_TIMEDOUT_OFFSET    (PHY_CHNG_OFFSET+PHY_CHNG_SIZE)
-+#define PHY_TIMEDOUT_SIZE      (1)     /*  29 Bits used */
-+#define PHY_TIMEDOUT_MASK      (1<<PHY_TIMEDOUT_OFFSET)
-+  #define PHY_MDIX_SWITCH  (1<<PHY_TIMEDOUT_OFFSET)
-+
-+#define PHY_MDIX_OFFSET    (PHY_TIMEDOUT_OFFSET+PHY_TIMEDOUT_SIZE)
-+#define PHY_MDIX_SIZE      (1)     /*  30 Bits used */
-+#define PHY_MDIX_MASK      (1<<PHY_MDIX_OFFSET)
-+  #define PHY_MDIX     (1<<PHY_MDIX_OFFSET)
-+
-+static char *lstate[]={"NULL","INIT","FINDING","FOUND","NWAY_START","NWAY_WAIT","LINK_WAIT","LINKED", "LOOPBACK"};
-+static int cpMacDebug;
-+
-+/*  Local MDIO Register Macros    */
-+
-+#define myMDIO_ALIVE           MDIO_ALIVE     (PhyDev->miibase)
-+#define myMDIO_CONTROL         MDIO_CONTROL   (PhyDev->miibase)
-+#define myMDIO_LINK            MDIO_LINK      (PhyDev->miibase)
-+#define myMDIO_LINKINT         MDIO_LINKINT   (PhyDev->miibase)
-+#define myMDIO_USERACCESS      MDIO_USERACCESS(PhyDev->miibase, PhyDev->inst)
-+#define myMDIO_USERPHYSEL      MDIO_USERPHYSEL(PhyDev->miibase, PhyDev->inst)
-+#define myMDIO_VER             MDIO_VER       (PhyDev->miibase)
-+
-+#ifndef VOLATILE32
-+#define VOLATILE32(addr) (*((volatile bit32u *)(addr)))
-+#endif
-+
-+/************************************
-+***
-+*** Delays at least ClockWait cylces
-+*** before returning
-+***
-+**************************************/
-+void _mdioDelayEmulate(PHY_DEVICE *PhyDev, int ClockWait)
-+  {
-+#ifdef _CPHAL_CPMAC                                                  /*+RC3.02*/
-+  HAL_DEVICE *HalDev = PhyDev->HalDev;                               /*+RC3.02*/
-+  osfuncSleep((int*)&ClockWait);                                     /*+RC3.02*/
-+#else                                                                /*+RC3.02*/
-+  volatile bit32u i=0;
-+  while(ClockWait--)
-+    {
-+    i |= myMDIO_LINK; /*  MDIO register access to burn cycles */
-+    }
-+#endif
-+  }
-+
-+void _mdioWaitForAccessComplete(PHY_DEVICE *PhyDev)
-+  {
-+  while((myMDIO_USERACCESS & MDIO_USERACCESS_GO)!=0)
-+    {
-+    }
-+  }
-+
-+void _mdioUserAccess(PHY_DEVICE *PhyDev, bit32u method, bit32u regadr, bit32u phyadr, bit32u data)
-+  {
-+  bit32u  control;
-+
-+  control =  MDIO_USERACCESS_GO |
-+             (method) |
-+             (((regadr) << 21) & MDIO_USERACCESS_REGADR) |
-+             (((phyadr) << 16) & MDIO_USERACCESS_PHYADR) |
-+             ((data) & MDIO_USERACCESS_DATA);
-+
-+  myMDIO_USERACCESS = control;
-+  }
-+
-+
-+
-+/************************************
-+***
-+*** Waits for MDIO_USERACCESS to be ready and reads data
-+*** If 'WaitForData' set, waits for read to complete and returns Data,
-+*** otherwise returns 0
-+*** Note: 'data' is 16 bits but we use 32 bits
-+***        to be consistent with rest of the code.
-+***
-+**************************************/
-+bit32u _mdioUserAccessRead(PHY_DEVICE *PhyDev, bit32u regadr, bit32u phyadr)
-+  {
-+
-+  _mdioWaitForAccessComplete(PhyDev);  /* Wait until UserAccess ready */
-+  _mdioUserAccess(PhyDev, MDIO_USERACCESS_READ, regadr, phyadr, 0);
-+  _mdioWaitForAccessComplete(PhyDev);  /* Wait for Read to complete */
-+
-+  return(myMDIO_USERACCESS & MDIO_USERACCESS_DATA);
-+  }
-+
-+
-+/************************************
-+***
-+*** Waits for MDIO_USERACCESS to be ready and writes data
-+***
-+**************************************/
-+void _mdioUserAccessWrite(PHY_DEVICE *PhyDev, bit32u regadr, bit32u phyadr, bit32u data)
-+  {
-+  _mdioWaitForAccessComplete(PhyDev);  /* Wait until UserAccess ready */
-+  _mdioUserAccess(PhyDev, MDIO_USERACCESS_WRITE, regadr, phyadr, data);
-+  }
-+
-+void _mdioDumpPhyDetailed(PHY_DEVICE *PhyDev)
-+{
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  bit32u  PhyNum;
-+  int     RegData;
-+
-+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
-+
-+  RegData = _mdioUserAccessRead(PhyDev, 0, PhyNum);
-+  mdioPrintf("PhyControl: %04X, Lookback=%s, Speed=%s, Duplex=%s\n",
-+    RegData,
-+    RegData&PHY_LOOP?"On":"Off",
-+    RegData&PHY_100?"100":"10",
-+    RegData&PHY_FD?"Full":"Half");
-+  RegData = _mdioUserAccessRead(PhyDev, 1, PhyNum);
-+  mdioPrintf("PhyStatus: %04X, AutoNeg=%s, Link=%s\n",
-+    RegData,
-+    RegData&NWAY_COMPLETE?"Complete":"NotComplete",
-+    RegData&PHY_LINKED?"Up":"Down");
-+  RegData = _mdioUserAccessRead(PhyDev, 4, PhyNum);
-+  mdioPrintf("PhyMyCapability: %04X, 100FD=%s, 100HD=%s, 10FD=%s, 10HD=%s\n",
-+    RegData,
-+    RegData&NWAY_FD100?"Yes":"No",
-+    RegData&NWAY_HD100?"Yes":"No",
-+    RegData&NWAY_FD10?"Yes":"No",
-+    RegData&NWAY_HD10?"Yes":"No");
-+
-+  RegData = _mdioUserAccessRead(PhyDev, 5, PhyNum);
-+  mdioPrintf("PhyPartnerCapability: %04X, 100FD=%s, 100HD=%s, 10FD=%s, 10HD=%s\n",
-+    RegData,
-+    RegData&NWAY_FD100?"Yes":"No",
-+    RegData&NWAY_HD100?"Yes":"No",
-+    RegData&NWAY_FD10?"Yes":"No",
-+    RegData&NWAY_HD10?"Yes":"No");
-+}
-+void _mdioDumpPhy(PHY_DEVICE *PhyDev, bit32u p)
-+  {
-+  bit32u j,n,PhyAcks;
-+  bit32u PhyRegAddr;
-+  bit32u phy_num;
-+  bit32u PhyMask  = PhyDev->PhyMask;
-+
-+  PhyAcks=myMDIO_ALIVE;
-+  PhyAcks&=PhyMask;   /* Only interested in 'our' Phys */
-+
-+  for(phy_num=0,j=1;phy_num<32;phy_num++,j<<=1)
-+    {
-+    if (PhyAcks&j)
-+      {
-+      mdioPrintf("%2d%s:",phy_num,(phy_num==p)?">":" ");
-+      for(PhyRegAddr=0;PhyRegAddr<6;PhyRegAddr++)
-+        {
-+        n = _mdioUserAccessRead(PhyDev, PhyRegAddr, phy_num);
-+        mdioPrintf(" %04x",n&0x0ffff);
-+        }
-+      mdioPrintf("\n");
-+      }
-+    }
-+  _mdioDumpPhyDetailed(PhyDev);
-+  }
-+
-+void _mdioDumpState(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u state    = PhyDev->PhyState;
-+
-+  if (!cpMacDebug) return;
-+
-+  mdioPrintf("Phy: %d, ",(state&PHY_DEV_MASK)>>PHY_DEV_OFFSET);
-+  mdioPrintf("State: %d/%s, ",(state&PHY_STATE_MASK)>>PHY_STATE_OFFSET,lstate[(state&PHY_STATE_MASK)>>PHY_STATE_OFFSET]);
-+  mdioPrintf("Speed: %d, ",(state&PHY_SPEED_MASK)>>PHY_SPEED_OFFSET);
-+  mdioPrintf("Dup: %d, ",(state&PHY_DUPLEX_MASK)>>PHY_DUPLEX_OFFSET);
-+  mdioPrintf("Tim: %d, ",(state&PHY_TIM_MASK)>>PHY_TIM_OFFSET);
-+  mdioPrintf("SMode: %d, ",(state&PHY_SMODE_MASK)>>PHY_SMODE_OFFSET);
-+  mdioPrintf("Chng: %d",(state&PHY_CHNG_MASK)>>PHY_CHNG_OFFSET);
-+  mdioPrintf("\n");
-+
-+  if (((state&PHY_STATE_MASK)!=FINDING)&&((state&PHY_STATE_MASK)!=INIT))
-+    _mdioDumpPhy(PhyDev, (state&PHY_DEV_MASK)>>PHY_DEV_OFFSET);
-+  }
-+
-+
-+void _mdioResetPhy(PHY_DEVICE *PhyDev,bit32u PhyNum)
-+  {
-+  bit16u PhyControlReg;
-+
-+  _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, PHY_RESET);
-+  if (cpMacDebug)
-+    mdioPrintf("cpMacMdioPhYReset(%d)\n",PhyNum);
-+
-+  /* Read control register until Phy Reset is complete */
-+  do
-+   {
-+    PhyControlReg = _mdioUserAccessRead(PhyDev, PHY_CONTROL_REG, PhyNum);
-+   }
-+   while (PhyControlReg & PHY_RESET); /* Wait for Reset to clear */
-+  }
-+
-+void _mdioDisablePhy(PHY_DEVICE *PhyDev,bit32u PhyNum)
-+  {
-+  _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, PHY_ISOLATE|PHY_PDOWN);
-+
-+  if (cpMacDebug)
-+    mdioPrintf("cpMacMdioDisablePhy(%d)\n",PhyNum);
-+
-+  }
-+
-+void _MdioInitState(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  bit32u CurrentState;
-+
-+  CurrentState=*PhyState;
-+  CurrentState=(CurrentState&~PHY_TIM_MASK)|(PHY_FIND_TO);
-+  CurrentState=(CurrentState&~PHY_STATE_MASK)|(FINDING);
-+  CurrentState=(CurrentState&~PHY_SPEED_MASK);
-+  CurrentState=(CurrentState&~PHY_DUPLEX_MASK);
-+  CurrentState|=PHY_CHANGE;
-+
-+  *PhyState=CurrentState;
-+
-+  }
-+
-+void _MdioFindingState(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  bit32u  PhyMask  = PhyDev->PhyMask;
-+  bit32u  PhyNum,i,j,PhyAcks;
-+
-+
-+  PhyNum=PHY_NOT_FOUND;
-+
-+  if (*PhyState&PHY_TIM_MASK)
-+    {
-+    *PhyState=(*PhyState&~PHY_TIM_MASK)|((*PhyState&PHY_TIM_MASK)-(1<<PHY_TIM_OFFSET));
-+    }
-+   else
-+    {
-+    PhyAcks=myMDIO_ALIVE;
-+    PhyAcks&=PhyMask;   /* Only interested in 'our' Phys */
-+
-+    for(i=0,j=1;(i<32)&&((j&PhyAcks)==0);i++,j<<=1);
-+
-+    if ((PhyAcks)&&(i<32)) PhyNum=i;
-+    if (PhyNum!=PHY_NOT_FOUND)
-+      {
-+      /*  Phy Found! */
-+      *PhyState=(*PhyState&~PHY_DEV_MASK)|((PhyNum&PHY_DEV_MASK)<<PHY_DEV_OFFSET);
-+      *PhyState=(*PhyState&~PHY_STATE_MASK)|(FOUND);
-+      *PhyState|=PHY_CHANGE;
-+      if (cpMacDebug)
-+        mdioPrintf("cpMacMdioFindingState: PhyNum: %d\n",PhyNum);
-+      }
-+     else
-+      {
-+      if (cpMacDebug)
-+        mdioPrintf("cpMacMdioFindingState: Timed Out looking for a Phy!\n");
-+      *PhyState|=PHY_RECK_TO;  /* This state currently has no support?*/
-+      }
-+    }
-+  }
-+
-+void _MdioFoundState(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState  = &PhyDev->PhyState;
-+  bit32u  PhyMask   = PhyDev->PhyMask;
-+  bit32u  MLinkMask = PhyDev->MLinkMask;
-+  bit32u  PhyNum,PhyStatus,NWAYadvertise,m,phynum,i,j,PhyAcks;
-+  bit32u  PhySel;
-+
-+  if ((*PhyState&PHY_SMODE_MASK)==0) return;
-+
-+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
-+
-+  PhyAcks=myMDIO_ALIVE;
-+  PhyAcks&=PhyMask;   /* Only interested in 'our' Phys */
-+
-+  /* Will now isolate all our Phys, except the one we have decided to use */
-+  for(phynum=0,j=1;phynum<32;phynum++,j<<=1)
-+    {
-+    if (PhyAcks&j)
-+      {
-+        if (phynum!=PhyNum)  /* Do not disabled Found Phy */
-+          _mdioDisablePhy(PhyDev,phynum);
-+      }
-+    }
-+
-+  /*  Reset the Phy and proceed with auto-negotiation */
-+  _mdioResetPhy(PhyDev,PhyNum);
-+
-+  /* Now setup the MDIOUserPhySel register */
-+
-+  PhySel=PhyNum;  /* Set the phy address */
-+
-+  /*  Set the way Link will be Monitored */
-+  /* Check the Link Selection Method */
-+  if ((1 << PhyNum) & MLinkMask)
-+    PhySel |= MDIO_USERPHYSEL_LINKSEL;
-+
-+  myMDIO_USERPHYSEL = PhySel;  /* update PHYSEL */
-+
-+  /* Get the Phy Status */
-+  PhyStatus = _mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
-+
-+
-+#ifdef _CPHAL_CPMAC
-+  /*  For Phy Internal loopback test, need to wait until Phy
-+      found, then set Loopback */
-+  if (PhyDev->HalDev->MdioConnect & _CPMDIO_LOOPBK)
-+    {
-+    /* Set Phy in Loopback */
-+    _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, PHY_LOOP|PHY_FD);
-+    /* Do a read to ensure PHY_LOOP has completed */
-+    _mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
-+    *PhyState=(*PhyState&~PHY_STATE_MASK)|(LOOPBACK);
-+    *PhyState|=PHY_CHANGE;
-+    return;
-+    }
-+#endif
-+
-+
-+  if (cpMacDebug)
-+    mdioPrintf("Enable Phy to negotiate external connection\n");
-+
-+  NWAYadvertise=NWAY_SEL;
-+  if (*PhyState&SMODE_FD100) NWAYadvertise|=NWAY_FD100;
-+  if (*PhyState&SMODE_HD100) NWAYadvertise|=NWAY_HD100;
-+  if (*PhyState&SMODE_FD10)  NWAYadvertise|=NWAY_FD10;
-+  if (*PhyState&SMODE_HD10)  NWAYadvertise|=NWAY_HD10;
-+
-+  *PhyState&=~(PHY_TIM_MASK|PHY_STATE_MASK);
-+  if ((PhyStatus&NWAY_CAPABLE)&&(*PhyState&SMODE_AUTO))   /*NWAY Phy Detected*/
-+    {
-+    /*For NWAY compliant Phys                                                */
-+
-+    _mdioUserAccessWrite(PhyDev, NWAY_ADVERTIZE_REG, PhyNum, NWAYadvertise);
-+
-+    if (cpMacDebug)
-+      {
-+      mdioPrintf("NWAY Advertising: ");
-+      if (NWAYadvertise&NWAY_FD100) mdioPrintf("FullDuplex-100 ");
-+      if (NWAYadvertise&NWAY_HD100) mdioPrintf("HalfDuplex-100 ");
-+      if (NWAYadvertise&NWAY_FD10)  mdioPrintf("FullDuplex-10 ");
-+      if (NWAYadvertise&NWAY_HD10)  mdioPrintf("HalfDuplex-10 ");
-+      mdioPrintf("\n");
-+      }
-+
-+    _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, AUTO_NEGOTIATE_EN);
-+
-+    _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, AUTO_NEGOTIATE_EN|RENEGOTIATE);
-+
-+    *PhyState|=PHY_CHANGE|PHY_NWST_TO|NWAY_START;
-+    }
-+   else
-+    {
-+    *PhyState&=~SMODE_AUTO;   /*The Phy is not capable of auto negotiation!  */
-+    m=NWAYadvertise;
-+    for(j=0x8000,i=0;(i<16)&&((j&m)==0);i++,j>>=1);
-+    m=j;
-+    j=0;
-+    if (m&(NWAY_FD100|NWAY_HD100))
-+      {
-+      j=PHY_100;
-+      m&=(NWAY_FD100|NWAY_HD100);
-+      }
-+    if (m&(NWAY_FD100|NWAY_FD10))
-+      j |= PHY_FD;
-+    if (cpMacDebug)
-+      mdioPrintf("Requested PHY mode %s Duplex %s Mbps\n",(j&PHY_FD)?"Full":"Half",(j&PHY_100)?"100":"10");
-+    _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, j);
-+    *PhyState&=~PHY_SPEED_MASK;
-+    if (j&PHY_100)
-+      *PhyState|=(1<<PHY_SPEED_OFFSET);
-+    *PhyState&=~PHY_DUPLEX_MASK;
-+    if (j&PHY_FD)
-+      *PhyState|=(1<<PHY_DUPLEX_OFFSET);
-+    *PhyState|=PHY_CHANGE|PHY_LINK_TO|LINK_WAIT;
-+    }
-+     _mdioMdixDelay(PhyDev);  /* If AutoMdix add delay */
-+  }
-+
-+void _MdioNwayStartState(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  bit32u PhyNum,PhyMode;
-+
-+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
-+
-+  /*Wait for Negotiation to start                                            */
-+
-+  PhyMode=_mdioUserAccessRead(PhyDev, PHY_CONTROL_REG, PhyNum);
-+
-+  if((PhyMode&RENEGOTIATE)==0)
-+    {
-+    _mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum); /*Flush pending latch bits*/
-+    *PhyState&=~(PHY_STATE_MASK|PHY_TIM_MASK);
-+    *PhyState|=PHY_CHANGE|NWAY_WAIT|PHY_NWDN_TO;
-+    _mdioMdixDelay(PhyDev);  /* If AutoMdix add delay */
-+    }
-+   else
-+    {
-+    if (*PhyState&PHY_TIM_MASK)
-+      *PhyState=(*PhyState&~PHY_TIM_MASK)|((*PhyState&PHY_TIM_MASK)-(1<<PHY_TIM_OFFSET));
-+     else
-+      _mdioPhyTimeOut(PhyDev);
-+    }
-+  }
-+
-+void _MdioNwayWaitState(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  bit32u  PhyNum,PhyStatus,NWAYadvertise,NWAYREadvertise,NegMode,i,j;
-+
-+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
-+
-+  PhyStatus=_mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
-+
-+  if (PhyStatus&NWAY_COMPLETE)
-+    {
-+    *PhyState|=PHY_CHANGE;
-+    *PhyState&=~PHY_SPEED_MASK;
-+    *PhyState&=~PHY_DUPLEX_MASK;
-+
-+    NWAYadvertise   =_mdioUserAccessRead(PhyDev, NWAY_ADVERTIZE_REG, PhyNum);
-+    NWAYREadvertise =_mdioUserAccessRead(PhyDev, NWAY_REMADVERTISE_REG, PhyNum);
-+
-+    /* Negotiated mode is we and the remote have in common */
-+    NegMode = NWAYadvertise & NWAYREadvertise;
-+
-+    if (cpMacDebug)
-+      {
-+       mdioPrintf("Phy: %d, ",(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET);
-+       mdioPrintf("NegMode %04X, NWAYadvertise %04X, NWAYREadvertise %04X\n",
-+         NegMode,  NWAYadvertise, NWAYREadvertise);
-+      }
-+
-+    /* Limit negotiation to fields below */
-+    NegMode &= (NWAY_FD100|NWAY_HD100|NWAY_FD10|NWAY_HD10);
-+
-+    if (NegMode==0)
-+      {
-+      NegMode=(NWAY_HD100|NWAY_HD10)&NWAYadvertise; /*or 10 ?? who knows, Phy is not MII compliant*/
-+      if(cpMacDebug)
-+        {
-+         mdioPrintf("Mdio:WARNING: Negotiation complete but NO agreement, default is HD\n");
-+         _mdioDumpPhyDetailed(PhyDev);
-+        } 
-+      }
-+    for(j=0x8000,i=0;(i<16)&&((j&NegMode)==0);i++,j>>=1);
-+
-+
-+    NegMode=j;
-+    if (cpMacDebug)
-+      {
-+      mdioPrintf("Negotiated connection: ");
-+      if (NegMode&NWAY_FD100) mdioPrintf("FullDuplex 100 Mbs\n");
-+      if (NegMode&NWAY_HD100) mdioPrintf("HalfDuplex 100 Mbs\n");
-+      if (NegMode&NWAY_FD10) mdioPrintf("FullDuplex 10 Mbs\n");
-+      if (NegMode&NWAY_HD10) mdioPrintf("HalfDuplex 10 Mbs\n");
-+      }
-+    if (NegMode!=0)
-+      {
-+      if (PhyStatus&PHY_LINKED)
-+        *PhyState=(*PhyState&~PHY_STATE_MASK)|LINKED;
-+       else
-+        *PhyState=(*PhyState&~PHY_STATE_MASK)|LINK_WAIT;
-+      if (NegMode&(NWAY_FD100|NWAY_HD100))
-+        *PhyState=(*PhyState&~PHY_SPEED_MASK)|(1<<PHY_SPEED_OFFSET);
-+      if (NegMode&(NWAY_FD100|NWAY_FD10))
-+        *PhyState=(*PhyState&~PHY_DUPLEX_MASK)|(1<<PHY_DUPLEX_OFFSET);
-+      }
-+    }
-+   else
-+    {
-+    if (*PhyState&PHY_TIM_MASK)
-+      *PhyState=(*PhyState&~PHY_TIM_MASK)|((*PhyState&PHY_TIM_MASK)-(1<<PHY_TIM_OFFSET));
-+     else
-+      _mdioPhyTimeOut(PhyDev);
-+    }
-+  }
-+
-+void _MdioLinkWaitState(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  bit32u  PhyStatus;
-+  bit32u  PhyNum;
-+
-+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
-+
-+  PhyStatus=_mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
-+
-+  if (PhyStatus&PHY_LINKED)
-+    {
-+    *PhyState=(*PhyState&~PHY_STATE_MASK)|LINKED;
-+    *PhyState|=PHY_CHANGE;
-+    }
-+   else
-+    {
-+    if (*PhyState&PHY_TIM_MASK)
-+      *PhyState=(*PhyState&~PHY_TIM_MASK)|((*PhyState&PHY_TIM_MASK)-(1<<PHY_TIM_OFFSET));
-+     else
-+      _mdioPhyTimeOut(PhyDev);
-+    }
-+  }
-+
-+void _mdioPhyTimeOut(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState;
-+
-+  if(_mdioMdixSupported(PhyDev) == 0)
-+    return;  /* AutoMdix not supported */
-+
-+  PhyState = &PhyDev->PhyState;
-+
-+  /*  Indicate MDI/MDIX mode switch is needed */
-+  *PhyState|=PHY_MDIX_SWITCH;
-+
-+  /* Toggle the MDIX mode indicatir */
-+  if(*PhyState & PHY_MDIX)
-+    *PhyState &= ~PHY_MDIX_MASK;       /* Current State is MDIX, set to MDI */
-+  else
-+    *PhyState |=  PHY_MDIX_MASK;      /* Current State is MDI, set to MDIX */
-+
-+  /* Reset state machine to FOUND */
-+  *PhyState=(*PhyState&~PHY_STATE_MASK)|(FOUND);
-+  }
-+
-+void _MdioLoopbackState(PHY_DEVICE *PhyDev)
-+  {
-+  return;
-+  }
-+
-+void _MdioLinkedState(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  bit32u  PhyNum   = (*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
-+
-+  if (myMDIO_LINK&(1<<PhyNum)) return;  /* if still Linked, exit*/
-+
-+  /* Not Linked */
-+  *PhyState&=~(PHY_STATE_MASK|PHY_TIM_MASK);
-+  if (*PhyState&SMODE_AUTO)
-+    *PhyState|=PHY_CHANGE|NWAY_WAIT|PHY_NWDN_TO;
-+   else
-+    *PhyState|=PHY_CHANGE|PHY_LINK_TO|LINK_WAIT;
-+    
-+  _mdioMdixDelay(PhyDev);  /* If AutoMdix add delay */
-+  }
-+
-+void _MdioDefaultState(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  /*Awaiting a cpMacMdioInit call                                             */
-+  *PhyState|=PHY_CHANGE;
-+  }
-+
-+
-+/*User Calls*********************************************************       */
-+
-+void cpMacMdioClose(PHY_DEVICE *PhyDev, int Full)
-+  {
-+  }
-+
-+
-+int cpMacMdioInit(PHY_DEVICE *PhyDev, bit32u miibase, bit32u inst, bit32u PhyMask, bit32u MLinkMask, bit32u MdixMask, bit32u ResetReg, bit32u ResetBit, bit32u MdioBusFreq, bit32u MdioClockFreq, int verbose, void *Info)
-+  {
-+  bit32u HighestChannel;
-+  bit32u ControlState;
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  bit32u clkdiv;                                                  /*MJH+030328*/
-+
-+  cpMacDebug=verbose;  
-+ 
-+  PhyDev->miibase   = miibase;
-+  PhyDev->inst      = inst;
-+  PhyDev->PhyMask   = PhyMask;
-+  PhyDev->MLinkMask = MLinkMask;
-+  PhyDev->MdixMask  = MdixMask;
-+#ifdef _CPHAL_CPMAC
-+  PhyDev->HalDev    = (HAL_DEVICE*) Info;
-+#endif
-+
-+  *PhyState &= ~PHY_MDIX_MASK;   /* Set initial State to MDI */
-+   
-+  /* Check that the channel supplied is within range */
-+  HighestChannel = (myMDIO_CONTROL & MDIO_CONTROL_HIGHEST_USER_CHANNEL) > 8;
-+  if(inst > HighestChannel)
-+    return(HighestChannel);
-+
-+  /*Setup MII MDIO access regs                                              */
-+
-+  /* Calculate the correct value for the mclkdiv */
-+  /* See PITS #14 */
-+  if (MdioClockFreq)                                              /*MJH+030402*/
-+     clkdiv = (MdioBusFreq / MdioClockFreq) - 1;                  /*MJH+030402*/
-+  else                                                            /*MJH+030402*/
-+     clkdiv = 0xFF;                                               /*MJH+030402*/
-+
-+  ControlState  = MDIO_CONTROL_ENABLE;
-+  ControlState |= (clkdiv & MDIO_CONTROL_CLKDIV);                 /*MJH+030328*/
-+
-+  /*
-+      If mii is not out of reset or if the Control Register is not set correctly
-+      then initalize
-+  */
-+  if( !(VOLATILE32(ResetReg) & (1 << ResetBit)) ||
-+     ((myMDIO_CONTROL & (MDIO_CONTROL_CLKDIV | MDIO_CONTROL_ENABLE)) != ControlState) )/*GSG~030404*/
-+    {
-+    /*  MII not setup, Setup initial condition  */
-+    VOLATILE32(ResetReg) &= ~(1 << ResetBit);
-+    _mdioDelayEmulate(PhyDev, 64);
-+    VOLATILE32(ResetReg) |= (1 << ResetBit);  /* take mii out of reset  */
-+    _mdioDelayEmulate(PhyDev, 64);
-+    myMDIO_CONTROL = ControlState;  /* Enable MDIO   */
-+    }
-+
-+  *PhyState=INIT;
-+
-+  if (cpMacDebug)
-+    mdioPrintf("cpMacMdioInit\n");
-+  _mdioDumpState(PhyDev);
-+  return(0);
-+  }
-+
-+void cpMacMdioSetPhyMode(PHY_DEVICE *PhyDev,bit32u PhyMode)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  bit32u CurrentState;
-+
-+  PhyDev->PhyMode = PhyMode;   /* used for AUTOMIDX, planned to replace PhyState fields */
-+
-+  *PhyState&=~PHY_SMODE_MASK;
-+
-+  if (PhyMode&NWAY_AUTO)  *PhyState|=SMODE_AUTO;
-+  if (PhyMode&NWAY_FD100) *PhyState|=SMODE_FD100;
-+  if (PhyMode&NWAY_HD100) *PhyState|=SMODE_HD100;
-+  if (PhyMode&NWAY_FD10)  *PhyState|=SMODE_FD10;
-+  if (PhyMode&NWAY_HD10)  *PhyState|=SMODE_HD10;
-+
-+  CurrentState=*PhyState&PHY_STATE_MASK;
-+  if ((CurrentState==NWAY_START)||
-+      (CurrentState==NWAY_WAIT) ||
-+      (CurrentState==LINK_WAIT) ||
-+      (CurrentState==LINKED)      )
-+    *PhyState=(*PhyState&~PHY_STATE_MASK)|FOUND|PHY_CHANGE;
-+  if (cpMacDebug)
-+    mdioPrintf("cpMacMdioSetPhyMode:%08X Auto:%d, FD10:%d, HD10:%d, FD100:%d, HD100:%d\n", PhyMode,
-+     PhyMode&NWAY_AUTO, PhyMode&NWAY_FD10, PhyMode&NWAY_HD10, PhyMode&NWAY_FD100,
-+     PhyMode&NWAY_HD100);
-+  _mdioDumpState(PhyDev);
-+  }
-+
-+/* cpMacMdioTic is called every 10 mili seconds to process Phy states         */
-+
-+int cpMacMdioTic(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  bit32u  CurrentState;
-+
-+  /*Act on current state of the Phy                                          */
-+
-+  CurrentState=*PhyState;
-+  switch(CurrentState&PHY_STATE_MASK)
-+    {
-+    case INIT:       _MdioInitState(PhyDev);      break;
-+    case FINDING:    _MdioFindingState(PhyDev);   break;
-+    case FOUND:      _MdioFoundState(PhyDev);     break;
-+    case NWAY_START: _MdioNwayStartState(PhyDev); break;
-+    case NWAY_WAIT:  _MdioNwayWaitState(PhyDev);  break;
-+    case LINK_WAIT:  _MdioLinkWaitState(PhyDev);  break;
-+    case LINKED:     _MdioLinkedState(PhyDev);    break;
-+    case LOOPBACK:   _MdioLoopbackState(PhyDev);  break;
-+    default:         _MdioDefaultState(PhyDev);   break;
-+    }
-+
-+  /*Dump state info if a change has been detected                            */
-+
-+  if ((CurrentState&~PHY_TIM_MASK)!=(*PhyState&~PHY_TIM_MASK))
-+    _mdioDumpState(PhyDev);
-+
-+  /*  Check is MDI/MDIX mode switch is needed */
-+  if(*PhyState & PHY_MDIX_SWITCH)
-+    {
-+    bit32u Mdix;
-+
-+    *PhyState &= ~PHY_MDIX_SWITCH;  /* Clear Mdix Flip indicator */
-+
-+    if(*PhyState & PHY_MDIX)
-+      Mdix = 1;
-+    else
-+      Mdix = 0;
-+    return(_MIIMDIO_MDIXFLIP|Mdix);
-+    }
-+
-+  /*Return state change to user                                              */
-+
-+  if (*PhyState&PHY_CHNG_MASK)
-+    {
-+    *PhyState&=~PHY_CHNG_MASK;
-+    return(1);
-+    }
-+   else
-+    return(0);
-+  }
-+
-+/* cpMacMdioGetDuplex is called to retrieve the Duplex info                   */
-+
-+int cpMacMdioGetDuplex(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  return((*PhyState&PHY_DUPLEX_MASK)?1:0);  /* return 0 or a 1  */
-+  }
-+
-+/* cpMacMdioGetSpeed is called to retreive the Speed info                     */
-+
-+int cpMacMdioGetSpeed(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  return(*PhyState&PHY_SPEED_MASK);
-+  }
-+
-+/* cpMacMdioGetPhyNum is called to retreive the Phy Device Adr info           */
-+
-+int cpMacMdioGetPhyNum(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  return((*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET);
-+  }
-+
-+/* cpMacMdioGetLoopback is called to Determine if the LOOPBACK state has been reached*/
-+
-+int cpMacMdioGetLoopback(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  return((*PhyState&PHY_STATE_MASK)==LOOPBACK);
-+  }
-+/* cpMacMdioGetLinked is called to Determine if the LINKED state has been reached*/
-+
-+int cpMacMdioGetLinked(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  return((*PhyState&PHY_STATE_MASK)==LINKED);
-+  }
-+
-+void cpMacMdioLinkChange(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  bit32u  PhyNum,PhyStatus;
-+
-+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
-+
-+  if (cpMacMdioGetLinked(PhyDev))
-+    {
-+    PhyStatus=_mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
-+
-+    if ((PhyStatus&PHY_LINKED)==0)
-+      {
-+      *PhyState&=~(PHY_TIM_MASK|PHY_STATE_MASK);
-+      if (*PhyState&SMODE_AUTO)
-+        {
-+        _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, AUTO_NEGOTIATE_EN|RENEGOTIATE);
-+        *PhyState|=PHY_CHANGE|PHY_NWST_TO|NWAY_START;
-+        }
-+       else
-+        {
-+        *PhyState|=PHY_CHANGE|PHY_LINK_TO|LINK_WAIT;
-+        }
-+      }
-+    }
-+  }
-+
-+void cpMacMdioGetVer(bit32u miibase, bit32u *ModID,  bit32u *RevMaj,  bit32u *RevMin)
-+  {
-+  bit32u  Ver;
-+
-+  Ver = MDIO_VER(miibase);
-+
-+  *ModID  = (Ver & MDIO_VER_MODID) >> 16;
-+  *RevMaj = (Ver & MDIO_VER_REVMAJ) >> 8;
-+  *RevMin = (Ver & MDIO_VER_REVMIN);
-+  }
-+
-+int cpMacMdioGetPhyDevSize(void)
-+  {
-+  return(sizeof(PHY_DEVICE));
-+  }
-+
-+  /* returns 0 if current Phy has AutoMdix support, otherwise 0 */
-+int _mdioMdixSupported(PHY_DEVICE *PhyDev)
-+  {
-+  bit32u *PhyState = &PhyDev->PhyState;
-+  bit32u PhyNum;
-+
-+  if((PhyDev->PhyMode & NWAY_AUTOMDIX) == 0)
-+    return(0);  /* AutoMdix not turned on */
-+
-+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
-+  if( ((1<<PhyNum) & PhyDev->MdixMask) == 0)
-+    return(0);  /*  Phy does not support AutoMdix*/
-+
-+  return(1);
-+  }
-+
-+/* If current Phy has AutoMdix support add Mdix Delay to the Timer State Value */
-+void _mdioMdixDelay(PHY_DEVICE *PhyDev)
-+  {
-+  int Delay;
-+  bit32u *PhyState = &PhyDev->PhyState;  
-+#ifdef _CPHAL_CPMAC
-+  HAL_DEVICE *HalDev = PhyDev->HalDev;
-+#endif
-+
-+  if(_mdioMdixSupported(PhyDev) == 0)
-+    return;  /* AutoMdix not supported */
-+/* Currently only supported when used with the CPMAC */
-+#ifdef _CPHAL_CPMAC
-+  /* Get the Delay value in milli-seconds and convert to ten-milli second value */
-+  Delay = cpmacRandomRange(HalDev, _AUTOMDIX_DELAY_MIN, _AUTOMDIX_DELAY_MAX);
-+  Delay /= 10;
-+
-+  /*  Add AutoMidx Random Switch Delay to AutoMdix Link Delay */
-+
-+  Delay += (PHY_MDIX_TO>>PHY_TIM_OFFSET);
-+
-+  /* Change Timeout value to AutoMdix standard */
-+  *PhyState &= ~(PHY_TIM_MASK);  /* Clear current Time out value */
-+  *PhyState |=  (Delay<<PHY_TIM_OFFSET);     /* Set new value */
-+#endif
-+  }
-+
-+
-diff -urN linux.old/drivers/net/avalanche_cpmac/cpmdio.h linux.dev/drivers/net/avalanche_cpmac/cpmdio.h
---- linux.old/drivers/net/avalanche_cpmac/cpmdio.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cpmdio.h	2005-07-12 02:48:42.047593000 +0200
-@@ -0,0 +1,73 @@
-+/*****************************************************************************
-+**      TNETD53xx Software Support
-+**      Copyright(c) 2002, Texas Instruments Incorporated. All Rights Reserved.
-+**
-+**      FILE: cpmdio.h   User Include for MDIO API Access
-+**
-+**      DESCRIPTION:
-+**              This include file contains definitions for the the MDIO API
-+**
-+**      HISTORY:
-+**              27Mar02 Michael Hanrahan Original (modified from emacmdio.h)
-+**              04Apr02 Michael Hanrahan Added Interrupt Support
-+*****************************************************************************/
-+#ifndef _INC_CPMDIO
-+#define _INC_CPMDIO
-+
-+
-+#ifndef __CPHAL_CPMDIO
-+typedef void PHY_DEVICE;
-+#endif
-+
-+
-+/*Version Information */
-+
-+void cpMacMdioGetVer(bit32u miiBase, bit32u *ModID,  bit32u *RevMaj,  bit32u *RevMin);
-+
-+/*Called once at the begining of time                                        */
-+
-+int  cpMacMdioInit(PHY_DEVICE *PhyDev, bit32u miibase, bit32u inst, bit32u PhyMask, bit32u MLinkMask, bit32u MdixMask, bit32u ResetBase, bit32u ResetBit, bit32u MdioBusFreq, bit32u MdioClockFreq, int verbose, void *Info);
-+int  cpMacMdioGetPhyDevSize(void);
-+
-+
-+/*Called every 10 mili Seconds, returns TRUE if there has been a mode change */
-+
-+int cpMacMdioTic(PHY_DEVICE *PhyDev);
-+
-+/*Called to set Phy mode                                                     */
-+
-+void cpMacMdioSetPhyMode(PHY_DEVICE *PhyDev,bit32u PhyMode);
-+
-+/*Calls to retreive info after a mode change!                                */
-+
-+int  cpMacMdioGetDuplex(PHY_DEVICE *PhyDev);
-+int  cpMacMdioGetSpeed(PHY_DEVICE *PhyDev);
-+int  cpMacMdioGetPhyNum(PHY_DEVICE *PhyDev);
-+int  cpMacMdioGetLinked(PHY_DEVICE *PhyDev);
-+void cpMacMdioLinkChange(PHY_DEVICE *PhyDev);
-+
-+/*  Shot Down  */
-+
-+void cpMacMdioClose(PHY_DEVICE *PhyDev, int Full);
-+
-+
-+/* Phy Mode Values  */
-+#define NWAY_AUTOMDIX       (1<<16)
-+#define NWAY_FD100          (1<<8)
-+#define NWAY_HD100          (1<<7)
-+#define NWAY_FD10           (1<<6)
-+#define NWAY_HD10           (1<<5)
-+#define NWAY_AUTO           (1<<0)
-+
-+/*
-+ *
-+ *    Tic() return values
-+ *
-+ */
-+
-+#define _MIIMDIO_MDIXFLIP (1<<28)
-+
-+#define _AUTOMDIX_DELAY_MIN  80  /* milli-seconds*/
-+#define _AUTOMDIX_DELAY_MAX 200  /* milli-seconds*/
-+
-+#endif  /*  _INC_CPMDIO */
-diff -urN linux.old/drivers/net/avalanche_cpmac/cppi_cpmac.c linux.dev/drivers/net/avalanche_cpmac/cppi_cpmac.c
---- linux.old/drivers/net/avalanche_cpmac/cppi_cpmac.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cppi_cpmac.c	2005-07-12 02:48:42.048593000 +0200
-@@ -0,0 +1,1345 @@
-+/*************************************************************************
-+ *  TNETDxxxx Software Support
-+ *  Copyright (c) 2002,2003 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  FILE: cppi.c
-+ *
-+ *  DESCRIPTION:
-+ *      This file contains shared code for all CPPI modules.
-+ *
-+ *  HISTORY:
-+ *   7Aug02 Greg RC1.00  Original Version created.
-+ *  27Sep02 Mick RC1.01  Merged for use by CPMAC/CPSAR
-+ *  16Oct02 Mick RC1.02  Performance Tweaks (see cppihist.txt)
-+ *  12Nov02 Mick RC1.02  Updated to use cpmac_reg.h
-+ *  09Jan03 Mick RC3.01  Removed modification to RxBuffer ptr
-+ *  28Mar03 Mick 1.03    RxReturn now returns error if Malloc Fails
-+ *  10Apr03 Mick 1.03.02 Added Needs Buffer Support
-+ *  11Jun03 Mick 1.06.02 halSend() errors corrected
-+ *  23Aug04 Mick 1.07.08 cpmac only - Send: bypass threshold check if TxInts re-enabled
-+ *
-+ *  @author  Greg Guyotte
-+ *  @version 1.00
-+ *  @date    7-Aug-2002
-+ *****************************************************************************/
-+/* each CPPI module must modify this file, the rest of the
-+                     code in cppi.c should be totally shared *//* Each CPPI module MUST properly define all constants shown below */
-+
-+/* CPPI registers */
-+
-+/* the following defines are not CPPI specific */
-+
-+static int TxInt(HAL_DEVICE *HalDev, int Ch, int Queue, int *MoreWork);                     
-+
-+static void FreeRx(HAL_DEVICE *HalDev, int Ch)
-+  {
-+   HAL_RCB *rcb_ptr;                                                /*+GSG 030303*/
-+   int rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf;                        /*+GSG 030303*/
-+   int Num = HalDev->ChData[Ch].RxNumBuffers, i;                    /*+GSG 030303*/
-+
-+   /* Free Rx data buffers attached to descriptors, if necessary */
-+   if (HalDev->RcbStart[Ch] != 0)                                   /*+GSG 030303*/
-+     {                                                              /*+GSG 030303*/
-+      for(i=0;i<Num;i++)                                            /*+GSG 030303*/
-+        {                                                           /*+GSG 030303*/
-+         rcb_ptr = (HAL_RCB *)(HalDev->RcbStart[Ch] + (i*rcbSize)); /*+GSG 030303*/
-+
-+         /* free the data buffer */
-+         if (rcb_ptr->DatPtr != 0)
-+       {
-+
-+        HalDev->OsFunc->FreeRxBuffer((void *)rcb_ptr->OsInfo, (void *)rcb_ptr->DatPtr);
-+        rcb_ptr->OsInfo=0;                                        /*MJH+030522*/
-+        rcb_ptr->DatPtr=0;                                        /*MJH+030522*/
-+       }
-+    }                                                           /*+GSG 030303*/
-+     }                                                              /*+GSG 030303*/
-+
-+   /* free up all desciptors at once */
-+   HalDev->OsFunc->FreeDmaXfer(HalDev->RcbStart[Ch]);
-+
-+   /* mark buffers as freed */
-+   HalDev->RcbStart[Ch] = 0;
-+  }
-+
-+static void FreeTx(HAL_DEVICE *HalDev, int Ch, int Queue)
-+  {
-+
-+/*+GSG 030303*/
-+
-+   /* free all descriptors at once */
-+   HalDev->OsFunc->FreeDmaXfer(HalDev->TcbStart[Ch][Queue]);
-+
-+   HalDev->TcbStart[Ch][Queue] = 0;
-+  }
-+
-+/* return of 0 means that this code executed, -1 means the interrupt was not
-+   a teardown interrupt */
-+static int RxTeardownInt(HAL_DEVICE *HalDev, int Ch)
-+  {
-+   bit32u base = HalDev->dev_base;
-+
-+   /* check to see if the interrupt is a teardown interrupt */
-+   if (((CPMAC_RX_INT_ACK( base , Ch ))  & TEARDOWN_VAL) == TEARDOWN_VAL)
-+     {
-+      /* finish channel teardown */
-+
-+      /* Free channel resources on a FULL teardown */
-+      if (HalDev->RxTeardownPending[Ch] & FULL_TEARDOWN)
-+        {
-+         FreeRx(HalDev, Ch);
-+        }
-+
-+      /* bug fix - clear Rx channel pointers on teardown */
-+      HalDev->RcbPool[Ch] = 0;
-+      HalDev->RxActQueueHead[Ch]  = 0;
-+      HalDev->RxActQueueCount[Ch] = 0;
-+      HalDev->RxActive[Ch] = FALSE;
-+
-+      /* write completion pointer */
-+      (CPMAC_RX_INT_ACK( base , Ch ))  = TEARDOWN_VAL;
-+
-+      /* use direction bit as a teardown pending bit! May be able to
-+         use only one teardown pending integer in HalDev */
-+
-+      HalDev->RxTeardownPending[Ch] &= ~RX_TEARDOWN;
-+
-+      HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0;
-+
-+      HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0;
-+      CPMAC_RX_INTMASK_CLEAR(HalDev->dev_base) = (1<<Ch);
-+      if ((HalDev->RxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0)
-+    {
-+
-+     HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_RX);
-+    }
-+      HalDev->RxTeardownPending[Ch] = 0;
-+
-+      return (EC_NO_ERRORS);
-+     }
-+   return (-1);
-+  }
-+
-+/* return of 0 means that this code executed, -1 means the interrupt was not
-+   a teardown interrupt.  Note: this code is always called with Queue == 0 (hi priority). */
-+static int TxTeardownInt(HAL_DEVICE *HalDev, int Ch, int Queue)
-+  {
-+   bit32u base = HalDev->dev_base;
-+   HAL_TCB *Last, *Curr, *First;                                    /*+GSG 030303*/
-+   int i;
-+
-+   if (((CPMAC_TX_INT_ACK( base , Ch ))  & TEARDOWN_VAL) == TEARDOWN_VAL)
-+     {
-+      /* perform all actions for both queues (+GSG 040212) */
-+      for (i=0; i<HalDev->ChData[Ch].TxNumQueues; i++)
-+        {
-+         /* return outstanding buffers to OS                             +RC3.02*/
-+         Curr = HalDev->TxActQueueHead[Ch][i];                     /*+GSG 030303*/
-+         First = Curr;                                                 /*+GSG 030303*/
-+         while (Curr)                                                  /*+GSG 030303*/
-+           {                                                           /*+GSG 030303*/
-+            /* Pop TCB(s) for packet from the stack */                 /*+GSG 030303*/
-+            Last = Curr->Eop;                                          /*+GSG 030303*/
-+            HalDev->TxActQueueHead[Ch][i] = Last->Next;            /*+GSG 030303*/
-+                                                                    /*+GSG 030303*/
-+            /* return to OS */                                         /*+GSG 030303*/
-+            HalDev->OsFunc->SendComplete(Curr->OsInfo);                /*+GSG 030303*/
-+                                                                    /*+GSG 030303*/
-+            /* Push Tcb(s) back onto the stack */                      /*+GSG 030303*/
-+            Curr = Last->Next;                                         /*+GSG 030303*/
-+            Last->Next = HalDev->TcbPool[Ch][i];                   /*+GSG 030303*/
-+            HalDev->TcbPool[Ch][i] = First;                        /*+GSG 030303*/
-+                                                                    /*+GSG 030303*/
-+            /* set the first(SOP) pointer for the next packet */       /*+GSG 030303*/
-+            First = Curr;                                              /*+GSG 030303*/
-+           }                                                           /*+GSG 030303*/
-+        }
-+
-+      /* finish channel teardown */
-+
-+      if (HalDev->TxTeardownPending[Ch] & FULL_TEARDOWN)
-+        {
-+         FreeTx(HalDev, Ch, 0);
-+
-+         if (HalDev->ChData[Ch].TxNumQueues == 2)
-+           FreeTx(HalDev, Ch, 1);
-+        } /* if FULL teardown */
-+
-+      /* perform all actions for both queues (+GSG 040212) */
-+      for (i=0; i<HalDev->ChData[Ch].TxNumQueues; i++)
-+        {
-+         /* bug fix - clear Tx channel pointers on teardown */
-+         HalDev->TcbPool[Ch][i] = 0;
-+         HalDev->TxActQueueHead[Ch][i]  = 0;
-+         HalDev->TxActQueueCount[Ch][i] = 0;
-+         HalDev->TxActive[Ch][i]        = FALSE;
-+        }
-+
-+      /* write completion pointer, only needed for the high priority queue */
-+      (CPMAC_TX_INT_ACK( base , Ch ))  = TEARDOWN_VAL;
-+
-+      /* no longer pending teardown */
-+      HalDev->TxTeardownPending[Ch] &= ~TX_TEARDOWN;
-+
-+      HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0;
-+
-+      HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0;
-+      CPMAC_TX_INTMASK_CLEAR(HalDev->dev_base) = (1<<Ch);
-+      if ((HalDev->TxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0)
-+        {
-+
-+         HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_TX);
-+        }
-+      HalDev->TxTeardownPending[Ch] = 0;
-+
-+      return (EC_NO_ERRORS);
-+     }
-+   return (-1);
-+  }
-+
-+/* +GSG 030421 */
-+static void AddToRxQueue(HAL_DEVICE *HalDev, HAL_RCB *FirstRcb, HAL_RCB *LastRcb, int FragCount, int Ch)
-+  {
-+   if (HalDev->RxActQueueHead[Ch]==0)
-+     {
-+
-+      HalDev->RxActQueueHead[Ch]=FirstRcb;
-+      HalDev->RxActQueueTail[Ch]=LastRcb;
-+      if (!HalDev->RxActive[Ch])
-+        {
-+         /* write Rx Queue Head Descriptor Pointer */
-+         ((CPMAC_RX_HDP(  HalDev->dev_base  ,  Ch  )) )  = VirtToPhys(FirstRcb) - HalDev->offset;
-+         HalDev->RxActive[Ch]=TRUE;
-+        }
-+     }
-+    else
-+     {
-+      register HAL_RCB *OldTailRcb;
-+      register bit32u rmode;
-+      
-+      HalDev->OsFunc->CriticalOn();
-+      OldTailRcb=HalDev->RxActQueueTail[Ch];
-+      OldTailRcb->Next=(void *)FirstRcb;
-+      OldTailRcb=VirtToVirtNoCache(OldTailRcb);
-+      OldTailRcb->HNext=VirtToPhys(FirstRcb) - HalDev->offset;
-+      HalDev->RxActQueueTail[Ch]=LastRcb;
-+      rmode=OldTailRcb->mode;
-+      if (rmode&CB_EOQ_BIT)
-+        {
-+        rmode&=~CB_EOQ_BIT;
-+        ((CPMAC_RX_HDP(  HalDev->dev_base  ,  Ch  )) )  = VirtToPhys(FirstRcb) - HalDev->offset;
-+        OldTailRcb->mode=rmode;
-+        }   
-+      HalDev->OsFunc->CriticalOff();
-+     }
-+  }
-+
-+/**
-+ *  @ingroup CPHAL_Functions
-+ *  This function is called to indicate to the CPHAL that the upper layer
-+ *  software has finished processing the receive data (given to it by
-+ *  osReceive()).  The CPHAL will then return the appropriate receive buffers
-+ *  and buffer descriptors to the available pool.
-+ *
-+ *  @param   HalReceiveInfo   Start of receive buffer descriptor chain returned to
-+ *                      CPHAL.
-+ *  @param   StripFlag  Flag indicating whether the upper layer software has
-+ *                      retained ownership of the receive data buffers.
-+ *<BR>
-+ * 'FALSE' means  that the CPHAL can reuse the receive data buffers.
-+ *<BR>
-+ * 'TRUE' : indicates the data buffers were retained by the OS
-+ *<BR>
-+ * NOTE:  If StripFlag is TRUE, it is the responsibility of the upper layer software to free the buffers when they are no longer needed.
-+ *
-+ *  @return EC_NO_ERRORS (ok). <BR>
-+ *          Possible Error Codes:<BR>
-+ *          @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *          @ref EC_VAL_RCB_NEEDS_BUFFER "EC_VAL_RCB_NEEDS_BUFFER"<BR>
-+ *          @ref EC_VAL_RCB_DROPPED "EC_VAL_RCB_DROPPED"<BR>
-+ */
-+static int halRxReturn(HAL_RECEIVEINFO *HalReceiveInfo,
-+            int StripFlag)
-+  {
-+   int Ch, i;
-+   HAL_RCB *LastRcb;
-+   HAL_DEVICE *HalDev;
-+   int RcbSize;
-+   int FragCount;
-+
-+   Ch = HalReceiveInfo->mode&0x0ff;
-+   HalDev = (HAL_DEVICE *)HalReceiveInfo->Off_BLen;
-+   FragCount = HalReceiveInfo->mode>>8;
-+      
-+   if (HalDev->State != enOpened)
-+     return(EC_CPMAC |EC_FUNC_RXRETURN|EC_VAL_INVALID_STATE);
-+
-+   LastRcb=(HAL_RCB *)HalReceiveInfo->Eop;
-+   LastRcb->HNext=0;
-+   LastRcb->Next=0;
-+   RcbSize = HalDev->ChData[Ch].RxBufSize;
-+
-+   if (FragCount>1)
-+     {
-+      LastRcb->Off_BLen=RcbSize;
-+      LastRcb->mode=CB_OWNERSHIP_BIT;
-+     }
-+
-+   HalReceiveInfo->Off_BLen=RcbSize;
-+   HalReceiveInfo->mode=CB_OWNERSHIP_BIT;
-+
-+   /* If OS has kept the buffers for this packet, attempt to alloc new buffers */
-+   if (StripFlag)
-+     {
-+      int rc=0;                                                      /*MJH+030417*/
-+      int GoodCount=0;                                               /*GSG+030421*/       
-+      HAL_RCB *TempRcb;
-+      char *pBuf;
-+      HAL_RCB *CurrHeadRcb = HalReceiveInfo, *LastGoodRcb=0;         /* +GSG 030421 */
-+
-+      TempRcb = HalReceiveInfo;
-+      for (i=0; i<FragCount; i++)
-+        {
-+         if (TempRcb == 0)
-+           {
-+            dbgPrintf("Rx Return error while allocating new buffers\n");
-+            dbgPrintf("Rcb = %08x, Rcb->Eop = %08x, FragCount = %d:%d\n",
-+              (bit32u)HalReceiveInfo, (bit32u)HalReceiveInfo->Eop, FragCount,i);
-+            osfuncSioFlush();
-+
-+            return(EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_CORRUPT_RCB_CHAIN);
-+           }
-+
-+         pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(RcbSize,0,
-+                             0xF,HalDev->ChData[Ch].OsSetup,
-+                             (void *)TempRcb,
-+                             (void *)&TempRcb->OsInfo,
-+                             (void *) HalDev->OsDev);
-+         if (!pBuf)
-+           {
-+            /* malloc failed, add this RCB to Needs Buffer List */
-+            (HAL_RCB *)TempRcb->Eop = TempRcb;                                  /* GSG +030430 */
-+            TempRcb->mode=1<<8|Ch;
-+            TempRcb->Off_BLen=(bit32u)HalDev;
-+            
-+            if(HalDev->NeedsCount < MAX_NEEDS)                                  /* +MJH 030410 */
-+              {                                                                 /* +MJH 030410 */
-+               HalDev->Needs[HalDev->NeedsCount] = (HAL_RECEIVEINFO *) TempRcb; /* +MJH 030410 */
-+               HalDev->NeedsCount++;                                            /* +MJH 030410 */
-+               rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_NEEDS_BUFFER);         /* ~MJH 030417 */
-+              }                                                                 /* +MJH 030410 */
-+             else                                                               /* +MJH 030410 */
-+               rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_DROPPED);              /* ~MJH 030417 */
-+
-+            /* requeue any previous RCB's that were ready to go before this one */
-+            if (GoodCount > 0)                                                  /* +GSG 030421 */
-+              {                                                                 /* +GSG 030421 */
-+               LastGoodRcb->HNext=0;                                            /* +GSG 030430 */
-+               LastGoodRcb->Next=0;                                             /* +GSG 030430 */
-+               osfuncDataCacheHitWritebackAndInvalidate((void *)LastGoodRcb, 16);            /* +GSG 030430 */
-+
-+               AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch);   /* +GSG 030421 */
-+               GoodCount = 0;                                                   /* +GSG 030421 */
-+              }                                                                 /* +GSG 030421 */
-+
-+            CurrHeadRcb = TempRcb->Next;                                        /* +GSG 030421 */
-+           }
-+          else                                                                  /* +GSG 030421 */
-+           {                                                                    /* +GSG 030421 */
-+            /* malloc succeeded, requeue the RCB to the hardware */
-+            TempRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset;
-+            TempRcb->DatPtr=pBuf;
-+            /* Emerald fix 10/29 */
-+            osfuncDataCacheHitWritebackAndInvalidate((void *)TempRcb, 16);
-+
-+            /* i store the last good RCB in case the malloc fails for the
-+               next fragment.  This ensures that I can go ahead and return
-+               a partial chain of RCB's to the hardware */
-+            LastGoodRcb = TempRcb;                                              /* +GSG 030421 */
-+            GoodCount++;                                                        /* +GSG 030421 */
-+           }                                                                    /* +GSG 030421 */
-+         TempRcb = TempRcb->Next;
-+        } /*  end of Frag loop */
-+      /* if there any good RCB's to requeue, do so here */
-+      if (GoodCount > 0)                                                        /* +GSG 030421 */
-+        {
-+         AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch);          /* +GSG 030421 */
-+        }
-+      return(rc);                                                               /* ~GSG 030421 */
-+     }
-+   else
-+     {
-+      /*  Not Stripping */
-+      /* Emerald */
-+      /* Write Back SOP and last RCB */
-+      osfuncDataCacheHitWritebackAndInvalidate((void *)HalReceiveInfo, 16);
-+
-+      if (FragCount > 1)
-+        {
-+         osfuncDataCacheHitWritebackAndInvalidate((void *)LastRcb, 16);
-+        }
-+      /* if not stripping buffers, always add to queue */
-+      AddToRxQueue(HalDev, HalReceiveInfo, LastRcb, FragCount, Ch); /*MJH~030520*/
-+     }
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+/* +MJH 030410
-+   Trys to liberate an RCB until liberation fails.
-+   Note: If liberation fails then RxReturn will re-add the RCB to the
-+         Needs list.
-+*/
-+static void NeedsCheck(HAL_DEVICE *HalDev)
-+{
-+    HAL_RECEIVEINFO* HalRcb;
-+    int rc;
-+    HalDev->OsFunc->CriticalOn();
-+    while(HalDev->NeedsCount)
-+      {
-+      HalDev->NeedsCount--;
-+      HalRcb = HalDev->Needs[HalDev->NeedsCount];
-+      rc =  halRxReturn(HalRcb, 1);
-+      /* short circuit if RxReturn starts to fail */
-+      if (rc != 0)
-+        break;
-+      }
-+    HalDev->OsFunc->CriticalOff();
-+}
-+
-+/*
-+ *  This function allocates transmit buffer descriptors (internal CPHAL function).
-+ *  It creates a high priority transmit queue by default for a single Tx
-+ *  channel.  If QoS is enabled for the given CPHAL device, this function
-+ *  will also allocate a low priority transmit queue.
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
-+ *  @param   Ch       Channel number.
-+ *
-+ *  @return  0 OK, Non-Zero Not OK
-+ */
-+static int InitTcb(HAL_DEVICE *HalDev, int Ch)
-+  {
-+   int i, Num = HalDev->ChData[Ch].TxNumBuffers;
-+   HAL_TCB *pTcb=0;
-+   char *AllTcb;
-+   int  tcbSize, Queue;
-+   int SizeMalloc;
-+
-+   tcbSize = (sizeof(HAL_TCB)+0xf)&~0xf;
-+   SizeMalloc = (tcbSize*Num)+0xf;
-+
-+   for (Queue=0; Queue < HalDev->ChData[Ch].TxNumQueues; Queue++)
-+     {
-+      if (HalDev->TcbStart[Ch][Queue] == 0)
-+        {
-+
-+         /* malloc all TCBs at once */
-+         AllTcb = (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff);
-+         if (!AllTcb)
-+           {
-+            return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_TCB_MALLOC_FAILED);
-+           }
-+
-+         HalDev->OsFunc->Memset(AllTcb, 0, SizeMalloc);
-+
-+         /* keep this address for freeing later */
-+         HalDev->TcbStart[Ch][Queue] = AllTcb;
-+        }
-+       else
-+        {
-+         /* if the memory has already been allocated, simply reuse it! */
-+         AllTcb = HalDev->TcbStart[Ch][Queue];
-+        }
-+
-+      /* align to cache line */
-+      AllTcb = (char *)(((bit32u)AllTcb + 0xf) &~ 0xf); /*PITS #143  MJH~030522*/
-+
-+      /* default High priority transmit queue */
-+      HalDev->TcbPool[Ch][Queue]=0;
-+      for(i=0;i<Num;i++)
-+        {
-+         /*pTcb=(HAL_TCB *) OsFunc->MallocDmaXfer(sizeof(HAL_TCB),0,0xffffffff); */
-+         pTcb= (HAL_TCB *)(AllTcb + (i*tcbSize));
-+         pTcb->mode=0;
-+         pTcb->BufPtr=0;
-+         pTcb->Next=HalDev->TcbPool[Ch][Queue];
-+         pTcb->Off_BLen=0;
-+         HalDev->TcbPool[Ch][Queue]=pTcb;
-+        }
-+      /*HalDev->TcbEnd = pTcb;*/
-+     }
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+/*
-+ *  This function allocates receive buffer descriptors (internal CPHAL function).
-+ *  After allocation, the function 'queues' (gives to the hardware) the newly
-+ *  created receive buffers to enable packet reception.
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
-+ *  @param   Ch    Channel number.
-+ *
-+ *  @return  0 OK, Non-Zero Not OK
-+ */
-+static int InitRcb(HAL_DEVICE *HalDev, int Ch)
-+  {
-+   int i, Num = HalDev->ChData[Ch].RxNumBuffers;
-+   int Size = HalDev->ChData[Ch].RxBufSize;
-+   HAL_RCB *pRcb;
-+   char *pBuf;
-+   char *AllRcb;
-+   int  rcbSize;
-+   int  DoMalloc = 0;
-+   int SizeMalloc;
-+   int MallocSize;
-+
-+   rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf;
-+   SizeMalloc = (rcbSize*Num)+0xf;
-+
-+   if (HalDev->RcbStart[Ch] == 0)
-+     {
-+      DoMalloc = 1;
-+
-+      /* malloc all RCBs at once */
-+      AllRcb= (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff);
-+      if (!AllRcb)
-+        {
-+         return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RCB_MALLOC_FAILED);
-+        }
-+
-+      HalDev->OsFunc->Memset(AllRcb, 0, SizeMalloc);
-+
-+      /* keep this address for freeing later */
-+      HalDev->RcbStart[Ch] = AllRcb;
-+     }
-+    else
-+     {
-+      /* if the memory has already been allocated, simply reuse it! */
-+      AllRcb = HalDev->RcbStart[Ch];
-+     }
-+
-+   /* align to cache line */
-+   AllRcb = (char *)(((bit32u)AllRcb + 0xf)&~0xf);  /*PITS #143  MJH~030522*/
-+
-+   HalDev->RcbPool[Ch]=0;
-+   for(i=0;i<Num;i++)
-+     {
-+      pRcb = (HAL_RCB *)(AllRcb + (i*rcbSize));
-+
-+      if (DoMalloc == 1)
-+        {
-+
-+         MallocSize = Size;                                       /*~3.01 */
-+         pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(MallocSize,0,0xF,HalDev->ChData[Ch].OsSetup, (void *)pRcb, (void *)&pRcb->OsInfo, (void *) HalDev->OsDev);
-+         if(!pBuf)
-+             {
-+            return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RX_BUFFER_MALLOC_FAILED);
-+             }
-+           /* -RC3.01 pBuf = (char *)(((bit32u)pBuf+0xF) & ~0xF); */
-+         pRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset;
-+         pRcb->DatPtr=pBuf;
-+        }
-+      pRcb->mode=(1<<8)|Ch; /* One Frag for Ch */
-+      pRcb->Next=(void *)HalDev->RcbPool[Ch];
-+      pRcb->Off_BLen=(bit32u)HalDev;
-+      HalDev->RcbPool[Ch]=pRcb;
-+     }
-+
-+   /* Give all of the Rx buffers to hardware */
-+
-+   while(HalDev->RcbPool[Ch])
-+     {
-+      pRcb=HalDev->RcbPool[Ch];
-+      HalDev->RcbPool[Ch]=pRcb->Next;
-+      pRcb->Eop=(void*)pRcb;
-+      pRcb->mode=(1<<8)|Ch;
-+      halRxReturn((HAL_RECEIVEINFO *)pRcb, 0);
-+     }
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+/**
-+ *  @ingroup CPHAL_Functions
-+ *  This function transmits the data in FragList using available transmit
-+ *  buffer descriptors.  More information on the use of the Mode parameter
-+ *  is available in the module-specific appendices.  Note:  The OS should
-+ *  not call Send() for a channel that has been requested to be torndown.
-+ *
-+ *  @param   HalDev      CPHAL module instance. (set by cphalInitModule())
-+ *  @param   FragList    Fragment List structure.
-+ *  @param   FragCount   Number of fragments in FragList.
-+ *  @param   PacketSize  Number of bytes to transmit.
-+ *  @param   OsSendInfo  OS Send Information structure. <BR>
-+ *  @param   Mode        32-bit value with the following bit fields: <BR>
-+ *                       31-16: Mode  (used for module specific data). <BR>
-+ *                       15-08: Queue (transmit queue to send on). <BR>
-+ *                       07-00: Channel (channel number to send on).
-+ *
-+ *  @return  EC_NO_ERRORS (ok). <BR>
-+ *           Possible Error Codes:<BR>
-+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *           @ref EC_VAL_NOT_LINKED "EC_VAL_NOT_LINKED"<BR>
-+ *           @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
-+ *           @ref EC_VAL_OUT_OF_TCBS "EC_VAL_OUT_OF_TCBS"<BR>
-+ *           @ref EC_VAL_NO_TCBS "EC_VAL_NO_TCBS"<BR>
-+ */
-+static int halSend(HAL_DEVICE *HalDev,FRAGLIST *FragList,
-+                      int FragCount,int PacketSize, OS_SENDINFO *OsSendInfo,
-+                      bit32u Mode)
-+  {
-+  HAL_TCB *tcb_ptr, *head;
-+  int i;
-+  int rc = EC_NO_ERRORS;
-+  int Ch = Mode & 0xFF;
-+  int Queue = (Mode>>8)&0xFF;
-+  /*int DoThresholdCheck=1;  */ /* Used when TxIntDisable is set and TxInts are re-enabled */
-+  
-+  if (HalDev->State != enOpened)
-+     return(EC_CPPI|EC_FUNC_SEND|EC_VAL_INVALID_STATE);
-+
-+  if (!HalDev->Linked)
-+    {
-+     rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_NOT_LINKED;
-+     return(rc);
-+    }
-+
-+  if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0)                    /*MJH~030611*/ /*PITS 148*/
-+    return(EC_CPMAC |EC_FUNC_SEND|EC_VAL_INVALID_CH);              /*+GSG 030303*/
-+
-+  HalDev->OsFunc->CriticalOn();
-+
-+  /* Setup Tx mode and size */
-+  if (PacketSize<60)
-+    {
-+     FragList[FragCount-1].len += (60 - PacketSize);              /*MJH~030506*//*PITS 132*/
-+     PacketSize = 60;                                             /*MJH~030506*/
-+    }
-+  Mode &= CB_PASSCRC_BIT;
-+
-+  tcb_ptr = head = HalDev->TcbPool[Ch][Queue];
-+
-+  if (tcb_ptr)
-+    {
-+
-+     Mode|=PacketSize|CB_SOF_BIT|CB_OWNERSHIP_BIT;
-+
-+     for (i=0; i<FragCount; i++)
-+
-+       {
-+        /* Setup Tx mode and size */
-+        tcb_ptr->Off_BLen = FragList[i].len;
-+        
-+        tcb_ptr->mode     = Mode;
-+        tcb_ptr->BufPtr   = VirtToPhys((bit32 *)FragList[i].data) - HalDev->offset;
-+        tcb_ptr->OsInfo = OsSendInfo;
-+
-+        if (i == (FragCount - 1))
-+          {
-+           /* last fragment */
-+           tcb_ptr->mode |= CB_EOF_BIT;
-+
-+           /* since this is the last fragment, set the TcbPool pointer before
-+              nulling out the Next pointers */
-+
-+           HalDev->TcbPool[Ch][Queue] = tcb_ptr->Next;
-+
-+           tcb_ptr->Next = 0;
-+           tcb_ptr->HNext = 0;
-+
-+           /* In the Tx Interrupt handler, we will need to know which TCB is EOP,
-+              so we can save that information in the SOP */
-+           head->Eop = tcb_ptr;
-+
-+           /* Emerald fix 10/29 */
-+       osfuncDataCacheHitWritebackAndInvalidate((void *)tcb_ptr, 16);
-+
-+          }
-+         else
-+          {
-+           Mode=CB_OWNERSHIP_BIT;
-+           tcb_ptr->HNext    = VirtToPhys((bit32 *)tcb_ptr->Next) - HalDev->offset;
-+        
-+           /* Emerald fix 10/29 */
-+           osfuncDataCacheHitWritebackAndInvalidate((void *)tcb_ptr, 16);
-+
-+           tcb_ptr = tcb_ptr->Next;  /* what about the end of TCB list?? */
-+
-+           if (tcb_ptr == 0)
-+             {
-+              rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_OUT_OF_TCBS;
-+              goto ExitSend;
-+             }
-+          }
-+       } /* for */
-+
-+     /* put it on the high priority queue */
-+     if (HalDev->TxActQueueHead[Ch][Queue] == 0)
-+       {
-+        HalDev->TxActQueueHead[Ch][Queue]=head;
-+        HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr;
-+/*+GSG 030303*//*+GSG 030303*/
-+        if (!HalDev->TxActive[Ch][Queue])
-+          {
-+
-+              bit32u base = HalDev->dev_base;
-+              
-+              /* write CPPI TX HDP */
-+              (CPMAC_TX_HDP( base , Ch ))  = VirtToPhys(head)  - HalDev->offset;
-+              HalDev->TxActive[Ch][Queue]=TRUE;
-+
-+          }
-+       }
-+      else
-+       {
-+	    register volatile HAL_TCB *pTailTcb;   
-+        register bit32u tmode;
-+        register bit32u pCurrentTcb;
-+        
-+        HalDev->TxActQueueTail[Ch][Queue]->Next=head;
-+        /* Emerald fix 10/29 */
-+        
-+        pTailTcb=(HAL_TCB *)VirtToVirtNoCache(&HalDev->TxActQueueTail[Ch][Queue]->HNext);
-+        pCurrentTcb=VirtToPhys(head)  - HalDev->offset;
-+        pTailTcb->HNext=pCurrentTcb;
-+        HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr;
-+/*+GSG 030303*/
-+        tmode=pTailTcb->mode;  
-+        if (tmode&CB_EOQ_BIT)
-+          {
-+           bit32u base = HalDev->dev_base;
-+
-+           tmode&=~CB_EOQ_BIT;
-+           pTailTcb->mode=tmode;
-+           ((CPMAC_TX_HDP( base , Ch )) )  = pCurrentTcb;
-+          }
-+
-+        else
-+          {
-+           if(HalDev->TxIntDisable)
-+             {
-+              /*  Enable Interrupts, to ensure packet goes out on wire */
-+              CPMAC_TX_INTMASK_SET(HalDev->dev_base) = (1<<Ch); 
-+              halPacketProcessEnd(HalDev); /* Allow Interrupt to be seen at the OS */
-+              /*DoThresholdCheck = 0; */       /* Disable Threshold Check */
-+
-+             }       
-+          }
-+
-+       }
-+     rc = EC_NO_ERRORS;
-+     goto ExitSend;
-+    } /* if (tcb_ptr) */
-+   else
-+    {
-+     rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_NO_TCBS;
-+     goto ExitSend;
-+    }
-+ExitSend:
-+
-+/* 15 June 2004 - NSP Performance Update : If Tx Ints are disabled then process them here */
-+/* 29 June 2004 - NSP Performance Update : Moved to end at request of BCIL */
-+/* 23 Aug  2004 - NSP Performance Update : If Tx Ints are re-enabled do not do Threshold check */
-+
-+   if(HalDev->TxIntDisable /*&& DoThresholdCheck*/)
-+   {
-+      if(--HalDev->TxIntThreshold[Ch] <= 0)
-+      {
-+          int MoreWork;
-+          TxInt(HalDev, Ch, 0, &MoreWork);
-+          HalDev->TxIntThreshold[Ch] = HalDev->TxIntThresholdMaster[Ch];
-+      }
-+   }
-+    HalDev->OsFunc->CriticalOff();
-+
-+   return(rc);
-+  }
-+
-+/*
-+ *  This function processes receive interrupts.  It traverses the receive
-+ *  buffer queue, extracting the data and passing it to the upper layer software via
-+ *  osReceive().  It handles all error conditions and fragments without valid data by
-+ *  immediately returning the RCB's to the RCB pool.
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
-+ *  @param   Ch       Channel Number.
-+ *  @param   MoreWork Flag that indicates that there is more work to do when set to 1.
-+ *
-+ *  @return  0 if OK, non-zero otherwise.
-+ */
-+static int RxInt(HAL_DEVICE *HalDev, int Ch, int *MoreWork)
-+  {
-+  HAL_RCB *CurrentRcb, *SopRcb, *EofRcb, *EopRcb;
-+  bit32u RxBufStatus,PacketsServiced, RxPktLen = 0, RxSopStatus,
-+    FrmFrags, TotalFrags, FrmLen;
-+  int base = HalDev->dev_base, Ret;
-+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+  int RxServiceMax = HalDev->ChData[Ch].RxServiceMax;
-+  int FragIndex; /* +GSG 030508 */
-+  
-+  if(HalDev->NeedsCount) /* +MJH 030410 */
-+    NeedsCheck(HalDev);  /* +MJH 030410 */
-+
-+  /* Handle case of teardown interrupt */
-+  if (HalDev->RxTeardownPending[Ch] != 0)
-+    {
-+     Ret = RxTeardownInt(HalDev, Ch);
-+     if (Ret == 0)
-+       {                                                              /*+GSG 030303*/
-+        *MoreWork = 0;
-+        return (EC_NO_ERRORS);
-+       }                                                              /*+GSG 030303*/
-+    }
-+
-+  /* Examine first RCB on the software active queue */
-+  CurrentRcb=HalDev->RxActQueueHead[Ch];
-+  osfuncDataCacheHitInvalidate((void*)CurrentRcb, 16);
-+  RxBufStatus=CurrentRcb->mode;
-+  PacketsServiced=0;
-+  
-+  /* Process received packets until we find hardware owned descriptors
-+     or until we hit RxServiceMax */
-+  while((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)&&
-+    (PacketsServiced<RxServiceMax)) /* ~GSG 030307 */
-+    {
-+
-+     PacketsServiced++; /* ~GSG 030307 */
-+     SopRcb=CurrentRcb;
-+     RxSopStatus=RxBufStatus;
-+     RxPktLen = RxSopStatus&CB_SIZE_MASK;
-+    
-+     FrmFrags=0;
-+     TotalFrags=0;
-+     FragIndex=0;
-+     FrmLen=0;
-+     EofRcb=0;
-+
-+/* +GSG 030508 *//* +GSG 030508 */
-+
-+     /* Loop through all fragments that comprise current packet.  Build
-+        fraglist and exit when the end of the packet is reached, or the
-+        end of the descriptor list is reached. */
-+     do
-+       {
-+	    bit32u DmaLen;
-+	   
-+
-+        DmaLen=CurrentRcb->Off_BLen;
-+
-+        FrmLen+=DmaLen;
-+        TotalFrags++;
-+        if (!EofRcb)
-+          {
-+           HalDev->fraglist[FragIndex].data=((char *)CurrentRcb->DatPtr);       /* ~GSG 030508 */
-+
-+           HalDev->fraglist[FragIndex].len=DmaLen;                              /* ~GSG 030508 */
-+
-+           /* GSG 12/9 */
-+           HalDev->fraglist[FragIndex].OsInfo = CurrentRcb->OsInfo;             /* ~GSG 030508 */
-+
-+           /* Upper layer must do the data invalidate */ 
-+
-+           FrmFrags++;
-+           FragIndex++;                                                         /* ~GSG 030508 */
-+           if (FrmLen>=RxPktLen)
-+             EofRcb=CurrentRcb;
-+          }
-+        EopRcb=CurrentRcb;
-+        CurrentRcb=EopRcb->Next;
-+        if (CurrentRcb)
-+          {
-+           osfuncDataCacheHitInvalidate((void*)CurrentRcb,16);
-+          }
-+       }while(((EopRcb->mode&CB_EOF_BIT)==0)&&(CurrentRcb));
-+     
-+     /* Write the completion pointer for interrupt acknowledgement*/
-+     (CPMAC_RX_INT_ACK( base , Ch ))  = VirtToPhys(EopRcb) - HalDev->offset;
-+
-+     EopRcb->Next=0;
-+
-+     if (CurrentRcb == 0)
-+       { 
-+	    /* If we are out of RCB's we must not send this packet
-+	       to the OS. */
-+        int RcbSize = HalDev->ChData[Ch].RxBufSize;
-+
-+        if (TotalFrags>1)
-+          {
-+           EopRcb->Off_BLen=RcbSize;
-+           EopRcb->mode=CB_OWNERSHIP_BIT;
-+           osfuncDataCacheHitWritebackAndInvalidate((void *)EopRcb, 16);
-+          }
-+
-+        SopRcb->Off_BLen=RcbSize;
-+        SopRcb->mode=CB_OWNERSHIP_BIT;   
-+        osfuncDataCacheHitWritebackAndInvalidate((void *)SopRcb, 16);
-+      
-+        ((CPMAC_RX_HDP( base , Ch )) )  = VirtToPhys(SopRcb);
-+       }
-+      else
-+       { 
-+	    /* Dequeue packet and send to OS */
-+        int mode;
-+
-+        /* setup SopRcb for the packet */
-+        SopRcb->Eop=(void*)EopRcb;
-+
-+        /* dequeue packet */
-+        HalDev->RxActQueueHead[Ch]=CurrentRcb;
-+        
-+        if (EopRcb->mode&CB_EOQ_BIT)
-+          {
-+	       /* Next pointer is non-null and EOQ bit is set, which
-+	          indicates misqueue packet in CPPI protocol. */
-+
-+           ((CPMAC_RX_HDP( base , Ch )) )  = EopRcb->HNext;
-+          }
-+        
-+        mode = (SopRcb->mode & 0xFFFF0000) | Ch;
-+
-+        SopRcb->mode=(FrmFrags<<8)|Ch;
-+        SopRcb->Off_BLen=(bit32u)HalDev;
-+        
-+        /* send packet up the higher layer driver */
-+        OsFunc->Receive(HalDev->OsDev,HalDev->fraglist,FragIndex,RxPktLen,             /* ~GSG 030508 */
-+                       (HAL_RECEIVEINFO *)SopRcb,mode);
-+    
-+        RxBufStatus=CurrentRcb->mode;          
-+       }
-+    } /* while loop */
-+      
-+  if ((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)) /*~GSG 030307*/
-+    {
-+     *MoreWork = 1;
-+    }
-+   else
-+    {
-+     *MoreWork = 0;
-+    }
-+
-+  return (EC_NO_ERRORS);
-+}
-+
-+/*
-+ *  This function processes transmit interrupts.  It traverses the
-+ *  transmit buffer queue, detecting sent data buffers and notifying the upper
-+ *  layer software via osSendComplete().  (for SAR, i originally had this split
-+ *  into two functions, one for each queue, but joined them on 8/8/02)
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
-+ *  @param   Queue    Queue number to service (always 0 for MAC, Choose 1 for SAR to service low priority queue)
-+ *  @param   MoreWork Flag that indicates that there is more work to do when set to 1.
-+ *
-+ *  @return  0 if OK, non-zero otherwise.
-+ */
-+int TxInt(HAL_DEVICE *HalDev, int Ch, int Queue, int *MoreWork)
-+  {
-+  HAL_TCB *CurrentTcb,*LastTcbProcessed,*FirstTcbProcessed;
-+  int PacketsServiced;
-+  bit32u TxFrameStatus;
-+  int base;
-+  int TxServiceMax = HalDev->ChData[Ch].TxServiceMax;
-+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+
-+/*+GSG 030303*//*+GSG 030303*/
-+
-+  /* load the module base address */
-+  base = HalDev->dev_base;
-+  
-+  /* Handle case of teardown interrupt.  This must be checked at
-+     the top of the function rather than the bottom, because
-+     the normal data processing can wipe out the completion
-+     pointer which is used to determine teardown complete. */
-+  if (HalDev->TxTeardownPending[Ch] != 0)
-+    {
-+	 int Ret;
-+	 
-+     Ret = TxTeardownInt(HalDev, Ch, Queue);
-+     if (Ret == 0)
-+       {                                                              /*+GSG 030303*/
-+        *MoreWork = 0; /* bug fix 1/6 */                              /*+GSG 030303*/
-+        return (EC_NO_ERRORS);
-+       }                                                              /*+GSG 030303*/
-+    }
-+
-+  OsFunc->CriticalOn(); /*  240904 */
-+
-+  CurrentTcb = HalDev->TxActQueueHead[Ch][Queue];
-+  FirstTcbProcessed=CurrentTcb;
-+
-+  if (CurrentTcb==0)
-+    {
-+     /* I saw this error a couple of times when multi-channels were added */
-+     dbgPrintf("[cppi TxInt()]TxH int with no TCB in queue!\n");
-+     dbgPrintf("              Ch=%d, CurrentTcb = 0x%08x\n", Ch, (bit32u)CurrentTcb);
-+     dbgPrintf("              HalDev = 0x%08x\n", (bit32u)HalDev);
-+     osfuncSioFlush();
-+     OsFunc->CriticalOff(); 
-+     return(EC_CPPI|EC_FUNC_TXINT|EC_VAL_NULL_TCB);
-+    }
-+
-+  osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16);
-+  TxFrameStatus=CurrentTcb->mode;
-+  PacketsServiced=0;
-+
-+  /* should the ownership bit check be inside of the loop?? could make it a
-+     while-do loop and take this check away */
-+  if ((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
-+    {
-+    do
-+      {
-+      /* Pop TCB(s) for packet from the stack */
-+      LastTcbProcessed=CurrentTcb->Eop;
-+
-+      /* new location for acknowledge */
-+      /* Write the completion pointer */
-+      (CPMAC_TX_INT_ACK( base , Ch ))  = VirtToPhys(LastTcbProcessed) - HalDev->offset;
-+
-+      HalDev->TxActQueueHead[Ch][Queue] = LastTcbProcessed->Next;
-+
-+/*+GSG 030303*//*+GSG 030303*/
-+
-+      osfuncDataCacheHitInvalidate((void *)LastTcbProcessed, 16);
-+
-+      if (LastTcbProcessed->mode&CB_EOQ_BIT)
-+        {
-+         if (LastTcbProcessed->Next)
-+           {
-+            /* Misqueued packet */
-+
-+               (CPMAC_TX_HDP( base , Ch ))  = LastTcbProcessed->HNext;
-+
-+           }
-+          else
-+           {
-+       /* Tx End of Queue */
-+
-+            HalDev->TxActive[Ch][Queue]=FALSE;
-+           }
-+        }
-+
-+      OsFunc->SendComplete(CurrentTcb->OsInfo);
-+
-+      /* Push Tcb(s) back onto the stack */
-+      CurrentTcb = LastTcbProcessed->Next;
-+
-+      LastTcbProcessed->Next=HalDev->TcbPool[Ch][Queue];
-+
-+      HalDev->TcbPool[Ch][Queue]=FirstTcbProcessed;
-+
-+      PacketsServiced++;
-+
-+      TxFrameStatus=CB_OWNERSHIP_BIT;
-+      /* set the first(SOP) pointer for the next packet */
-+      FirstTcbProcessed = CurrentTcb;
-+      if (CurrentTcb)
-+        {
-+         osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16);
-+         TxFrameStatus=CurrentTcb->mode;
-+        }
-+
-+      }while(((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
-+             &&(PacketsServiced<TxServiceMax));
-+
-+    if (((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
-+             &&(PacketsServiced==TxServiceMax))
-+      {
-+       *MoreWork = 1;
-+      }
-+     else
-+      {
-+       *MoreWork = 0;
-+      }
-+    }
-+    OsFunc->CriticalOff(); 
-+
-+  return(EC_NO_ERRORS);
-+  }
-+
-+/**
-+ *  @ingroup CPHAL_Functions
-+ *  This function performs a teardown for the given channel.  The value of the
-+ *  Mode parameter controls the operation of the function, as documented below.
-+ *
-+ *  Note: If bit 3 of Mode is set, this call is blocking, and will not return
-+ *  until the teardown interrupt has occurred and been processed. While waiting
-+ *  for a blocking teardown to complete, ChannelTeardown() will signal the OS
-+ *  (via Control(.."Sleep"..)) to allow the OS to perform other tasks if
-+ *  necessary.  If and only if bit 3 of Mode is clear, the CPHAL will call the
-+ *  OS TeardownComplete() function to indicate that the teardown has completed.
-+ *
-+ *  @param   HalDev  CPHAL module instance. (set by xxxInitModule())
-+ *  @param   Ch      Channel number.
-+ *  @param   Mode    Bit 0 (LSB): Perform Tx teardown (if set).<BR>
-+ *                   Bit 1: Perform Rx teardown (if set). <BR>
-+ *                   Bit 2: If set, perform full teardown (free buffers/descriptors).
-+ *                          If clear, perform partial teardown (keep buffers). <BR>
-+ *                   Bit 3 (MSB): If set, call is blocking.
-+ *                            If clear, call is non-blocking.
-+ *
-+ *  @return  EC_NO_ERRORS (ok). <BR>
-+ *           Possible Error Codes:<BR>
-+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *           @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
-+ *           @ref EC_VAL_TX_TEARDOWN_ALREADY_PEND "EC_VAL_TX_TEARDOWN_ALREADY_PEND"<BR>
-+ *           @ref EC_VAL_RX_TEARDOWN_ALREADY_PEND "EC_VAL_RX_TEARDOWN_ALREADY_PEND"<BR>
-+ *           @ref EC_VAL_TX_CH_ALREADY_TORNDOWN "EC_VAL_TX_CH_ALREADY_TORNDOWN"<BR>
-+ *           @ref EC_VAL_RX_CH_ALREADY_TORNDOWN "EC_VAL_RX_CH_ALREADY_TORNDOWN"<BR>
-+ *           @ref EC_VAL_TX_TEARDOWN_TIMEOUT "EC_VAL_TX_TEARDOWN_TIMEOUT"<BR>
-+ *           @ref EC_VAL_RX_TEARDOWN_TIMEOUT "EC_VAL_RX_TEARDOWN_TIMEOUT"<BR>
-+ *           @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR>
-+ */
-+static int halChannelTeardown(HAL_DEVICE *HalDev, int Ch, bit32 Mode)
-+  {
-+   int DoTx, DoRx, Sleep=2048, timeout=0;                         /*MJH~030306*/
-+   bit32u base = HalDev->dev_base;
-+
-+/* Set the module, used for error returns */
-+
-+   DoTx = (Mode & TX_TEARDOWN);
-+   DoRx = (Mode & RX_TEARDOWN);
-+
-+   if (HalDev->State < enInitialized)
-+     return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_STATE);
-+
-+   if ((Ch < 0) || (Ch > (MAX_CHAN-1) ))
-+     {
-+     return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_CH);
-+     }
-+
-+   /* set teardown pending bits before performing the teardown, because they
-+      will be used in the int handler (this is done for AAL5) */
-+   if (DoTx)
-+     {
-+      if (HalDev->TxTeardownPending[Ch] != 0)
-+        return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_ALREADY_PEND);
-+
-+      /* If a full teardown, this also means that the user must
-+      setup all channels again to use them */
-+      if (Mode & FULL_TEARDOWN)
-+        HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0;
-+
-+      if (HalDev->State < enOpened)
-+        {
-+         /* if the hardware has never been opened, the channel has never actually
-+         been setup in the hardware, so I just need to reset the software flag
-+         and leave */
-+         HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0;
-+         return (EC_NO_ERRORS);
-+    }
-+       else
-+    {
-+         if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0)
-+       {
-+            return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_TX_CH_ALREADY_TORNDOWN);
-+       }
-+
-+         /* set teardown flag */
-+         HalDev->TxTeardownPending[Ch] = Mode;
-+    }
-+     }
-+
-+   if (DoRx)
-+     {
-+      if (HalDev->RxTeardownPending[Ch] != 0)
-+        return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_ALREADY_PEND);
-+
-+      if (Mode & FULL_TEARDOWN)
-+        HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0;
-+
-+      if (HalDev->State < enOpened)
-+        {
-+         HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0;
-+         return (EC_NO_ERRORS);
-+    }
-+       else
-+    {
-+         if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == 0)
-+           return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_RX_CH_ALREADY_TORNDOWN);
-+
-+         HalDev->RxTeardownPending[Ch] = Mode;
-+    }
-+     }
-+
-+   /* Perform Tx Teardown Duties */
-+   if ((DoTx) && (HalDev->State == enOpened))
-+     {
-+      /* Request TX channel teardown */
-+      (CPMAC_TX_TEARDOWN( base ))  = Ch;
-+
-+      /* wait until teardown has completed */
-+      if (Mode & BLOCKING_TEARDOWN)
-+        {
-+     timeout = 0;
-+         while (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE)
-+       {
-+            osfuncSleep(&Sleep);
-+
-+            timeout++;
-+        if (timeout > 100000)
-+          {
-+               return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_TIMEOUT);
-+          }
-+       }
-+    }
-+     } /* if DoTx */
-+
-+   /* Perform Rx Teardown Duties */
-+   if ((DoRx) && (HalDev->State == enOpened))
-+     {
-+
-+      /* perform CPMAC specific RX channel teardown */
-+      CPMAC_RX_TEARDOWN(base) = Ch;
-+
-+      if (Mode & BLOCKING_TEARDOWN)
-+        {
-+     timeout = 0;
-+         while (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)
-+       {
-+            osfuncSleep(&Sleep);
-+
-+            timeout++;
-+        if (timeout > 100000)
-+          {
-+               return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_TIMEOUT);
-+          }
-+       }
-+        }
-+     } /* if DoRx */
-+
-+   return (EC_NO_ERRORS);
-+  }
-+
-+/**
-+ *  @ingroup CPHAL_Functions
-+ *  This function closes the CPHAL module.  The module will be reset.
-+ *  The Mode parameter should be used to determine the actions taken by
-+ *  Close().
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *  @param   Mode     Indicates actions to take on close.  The following integer
-+ *                    values are valid: <BR>
-+ *                    1:  Does not free buffer resources, init parameters remain
-+ *                        intact.  User can then call Open() without calling Init()
-+ *                        to attempt to reset the device and bring it back to the
-+ *                        last known state.<BR>
-+ *                    2:  Frees the buffer resources, but keeps init parameters.  This
-+ *                        option is a more aggressive means of attempting a device reset.
-+ *                    3:  Frees the buffer resources, and clears all init parameters. <BR>
-+ *                        At this point, the caller would have to call to completely
-+ *                        reinitialize the device (Init()) before being able to call
-+ *                        Open().  Use this mode if you are shutting down the module
-+ *                        and do not plan to restart.
-+ *
-+ *  @return  EC_NO_ERRORS (ok).<BR>
-+ *           Possible Error Codes:<BR>
-+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *           Any error code from halChannelTeardown().<BR>
-+ */
-+static int halClose(HAL_DEVICE *HalDev, bit32 Mode)
-+  {
-+   int Ch, Inst, Ret;
-+   OS_DEVICE *TmpOsDev;
-+   OS_FUNCTIONS *TmpOsFunc;
-+   HAL_FUNCTIONS *TmpHalFunc;
-+   char *TmpDeviceInfo;
-+
-+   int Ticks;                                                     /*MJH~030306*/
-+
-+   /* Verify proper device state */
-+   if (HalDev->State != enOpened)
-+     return (EC_CPMAC  | EC_FUNC_CLOSE|EC_VAL_INVALID_STATE);
-+
-+   /* Teardown all open channels */
-+   for (Ch = 0; Ch <= (MAX_CHAN-1) ; Ch++)
-+     {
-+      if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE)
-+        {
-+         if (Mode == 1)
-+           {
-+            Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN);
-+            if (Ret) return (Ret);
-+           }
-+          else
-+           {
-+            Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN);
-+            if (Ret) return (Ret);
-+           }
-+        }
-+
-+      if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)
-+        {
-+         if (Mode == 1)
-+           {
-+            Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN);
-+            if (Ret) return (Ret);
-+           }
-+          else
-+           {
-+            Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN);
-+            if (Ret) return (Ret);
-+           }
-+        }
-+     }
-+
-+   /* free fraglist in HalDev */
-+   HalDev->OsFunc->Free(HalDev->fraglist);
-+   HalDev->fraglist = 0;
-+
-+   /* unregister the interrupt */
-+   HalDev->OsFunc->IsrUnRegister(HalDev->OsDev, HalDev->interrupt);
-+
-+   Ticks = 0;    /* Disable Tick Timer */                           /*MJH+030306*/
-+   HalDev->OsFunc->Control(HalDev->OsDev, hcTick, hcClear, &Ticks); /*MJH+030306*/
-+
-+   /* Free the Phy Information Structure */
-+   if(HalDev->PhyDev)
-+   {
-+      HalDev->OsFunc->Free(HalDev->PhyDev);                               /*MJH+030513*/
-+      HalDev->PhyDev = 0;                                         /*MJH+030522*/
-+   }
-+
-+   /* Perform CPMAC specific closing functions */
-+   CPMAC_MACCONTROL(HalDev->dev_base) &= ~MII_EN;
-+   CPMAC_TX_CONTROL(HalDev->dev_base) &= ~TX_EN;
-+   CPMAC_RX_CONTROL(HalDev->dev_base) &= ~RX_EN;
-+
-+   /* put device back into reset */
-+   (*(volatile bit32u *)(HalDev->ResetBase)) &=~ (1<<HalDev->ResetBit);
-+   Ticks = 64;                                                    /*MJH~030306*/
-+   osfuncSleep(&Ticks);
-+
-+   /* If mode is 3, than clear the HalDev and set next state to DevFound*/
-+   if (Mode == 3)
-+     {
-+      /* I need to keep the HalDev parameters that were setup in InitModule */
-+      TmpOsDev = HalDev->OsDev;
-+      TmpOsFunc = HalDev->OsFunc;
-+      TmpDeviceInfo = HalDev->DeviceInfo;
-+
-+      TmpHalFunc = HalDev->HalFuncPtr;
-+      Inst = HalDev->Inst;
-+
-+      /* Clear HalDev */
-+
-+      HalDev->OsFunc->Memset(HalDev, 0, sizeof(HAL_DEVICE));
-+
-+      /* Restore key parameters */
-+      HalDev->OsDev = TmpOsDev;
-+      HalDev->OsFunc = TmpOsFunc;
-+      HalDev->DeviceInfo = TmpDeviceInfo;
-+
-+      HalDev->HalFuncPtr = TmpHalFunc;
-+      HalDev->Inst = Inst;
-+
-+      HalDev->State = enDevFound;
-+     }
-+    else
-+     {
-+      HalDev->State = enInitialized;
-+     }
-+
-+   return(EC_NO_ERRORS);
-+  }
-diff -urN linux.old/drivers/net/avalanche_cpmac/cpremap_cpmac.c linux.dev/drivers/net/avalanche_cpmac/cpremap_cpmac.c
---- linux.old/drivers/net/avalanche_cpmac/cpremap_cpmac.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cpremap_cpmac.c	2005-07-12 02:48:42.049593000 +0200
-@@ -0,0 +1,28 @@
-+#ifndef _INC_CPREMAP_C
-+#define _INC_CPREMAP_C
-+
-+#ifdef __ADAM2
-+static inline void osfuncDataCacheHitInvalidate(void *ptr, int Size)
-+  {
-+  asm(" cache  17, (%0)" : : "r" (ptr));
-+  }
-+
-+static inline void osfuncDataCacheHitWriteback(void *ptr, int Size)
-+  { 
-+  asm(" cache  25, (%0)" : : "r" (ptr));
-+  }
-+  
-+static inline void osfuncDataCacheHitWritebackAndInvalidate(void *ptr, int Size)
-+  { 
-+  asm(" cache  21, (%0)" : : "r" (ptr));
-+  }
-+
-+#else
-+
-+#define osfuncDataCacheHitInvalidate(MemPtr, Size)               __asm__(" .set mips3; cache  17, (%0); .set mips0" : : "r" (MemPtr))
-+#define osfuncDataCacheHitWritebackAndInvalidate(MemPtr, Size)   __asm__(" .set mips3; cache  21, (%0); .set mips0" : : "r" (MemPtr))
-+#define osfuncDataCacheHitWriteback(MemPtr, Size)                __asm__(" .set mips3; cache  25, (%0); .set mips0" : : "r" (MemPtr))      
-+            
-+#endif
-+
-+#endif
-diff -urN linux.old/drivers/net/avalanche_cpmac/cpswhal_cpmac.h linux.dev/drivers/net/avalanche_cpmac/cpswhal_cpmac.h
---- linux.old/drivers/net/avalanche_cpmac/cpswhal_cpmac.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cpswhal_cpmac.h	2005-07-12 02:48:42.050593000 +0200
-@@ -0,0 +1,632 @@
-+/************************************************************************
-+ *  TNETDxxxx Software Support
-+ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  FILE: cphal.h
-+ *
-+ *  DESCRIPTION:
-+ *      User include file, contains data definitions shared between the CPHAL
-+ *      and the upper-layer software.
-+ *
-+ *  HISTORY:
-+ *      Date      Modifier  Ver    Notes
-+ *      28Feb02   Greg      1.00   Original
-+ *      06Mar02   Greg      1.01   Documentation enhanced
-+ *      18Jul02   Greg      1.02   Many updates (OAM additions, general reorg)
-+ *      22Nov02   Mick      RC2    Additions from Denis' input on Control
-+ *
-+ *  author  Greg Guyotte
-+ *  version 1.02
-+ *  date    18-Jul-2002
-+ *****************************************************************************/
-+#ifndef _INC_CPHAL_H
-+#define _INC_CPHAL_H
-+
-+#ifdef _CPHAL_CPMAC
-+#include "ec_errors_cpmac.h"
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+#include "ec_errors_cpaal5.h"
-+#endif
-+
-+#ifdef _CPHAL_CPSAR
-+#include "ec_errors_cpsar.h"
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+#include "ec_errors_cpaal2.h"
-+#endif
-+
-+#ifndef __ADAM2
-+typedef char           bit8;
-+typedef short          bit16;
-+typedef int            bit32;
-+
-+typedef unsigned char  bit8u;
-+typedef unsigned short bit16u;
-+typedef unsigned int   bit32u;
-+
-+/*
-+typedef char           INT8;
-+typedef short          INT16;
-+typedef int            INT32;
-+typedef unsigned char  UINT8;
-+typedef unsigned short UINT16;
-+typedef unsigned int   UINT32;
-+*/
-+/*typedef unsigned int   size_t;*/
-+#endif
-+
-+#ifdef _CPHAL
-+
-+#ifndef TRUE
-+#define TRUE (1==1)
-+#endif
-+
-+#ifndef FALSE
-+#define FALSE (1==2)
-+#endif
-+
-+#ifndef NULL
-+#define NULL 0
-+#endif
-+
-+#endif
-+
-+#define        VirtToPhys(a)                 (((int)a)&~0xe0000000)
-+#define        VirtToVirtNoCache(a)          ((void*)((VirtToPhys(a))|0xa0000000))
-+#define        VirtToVirtCache(a)            ((void*)((VirtToPhys(a))|0x80000000))
-+#define        PhysToVirtNoCache(a)          ((void*)(((int)a)|0xa0000000))
-+#define        PhysToVirtCache(a)            ((void*)(((int)a)|0x80000000))
-+/*
-+#define        DataCacheHitInvalidate(a)     {__asm__(" cache  17, (%0)" :   : "r" (a));}
-+#define        DataCacheHitWriteback(a)      {__asm__(" cache  25, (%0)" :   : "r" (a));}
-+*/
-+
-+#define PARTIAL 1     /**< Used in @c Close() and @c ChannelTeardown() */
-+#define FULL 2        /**< Used in @c Close() and @c ChannelTeardown() */
-+
-+/* Channel Teardown Defines */
-+#define RX_TEARDOWN 2
-+#define TX_TEARDOWN 1
-+#define BLOCKING_TEARDOWN 8
-+#define FULL_TEARDOWN 4
-+#define PARTIAL_TEARDOWN 0
-+
-+#define MAX_DIR 2
-+#define DIRECTION_TX 0
-+#define DIRECTION_RX 1
-+#define TX_CH 0
-+#define RX_CH 1
-+#define HAL_ERROR_DEVICE_NOT_FOUND    1
-+#define HAL_ERROR_FAILED_MALLOC       2
-+#define HAL_ERROR_OSFUNC_SIZE         3
-+#define HAL_DEFAULT  0xFFFFFFFF
-+#define VALID(val)    (val!=HAL_DEFAULT)
-+
-+/*
-+ERROR REPORTING
-+
-+HAL Module Codes.  Each HAL module reporting an error code
-+should OR the error code with the respective Module error code
-+from the list below.
-+*/
-+#define EC_AAL5                                EC_HAL|EC_DEV_AAL5
-+#define EC_AAL2                                EC_HAL|EC_DEV_AAL2
-+#define EC_CPSAR                               EC_HAL|EC_DEV_CPSAR
-+#define EC_CPMAC                               EC_HAL|EC_DEV_CPMAC
-+#define EC_VDMA                                EC_HAL|EC_DEV_VDMA
-+#define EC_VLYNQ                               EC_HAL|EC_DEV_VLYNQ
-+#define EC_CPPI                                EC_HAL|EC_DEV_CPPI
-+
-+/*
-+HAL Function Codes.  Each HAL module reporting an error code
-+should OR the error code with one of the function codes from
-+the list below.
-+*/
-+#define EC_FUNC_HAL_INIT                       EC_FUNC(1)
-+#define EC_FUNC_CHSETUP                        EC_FUNC(2)
-+#define EC_FUNC_CHTEARDOWN                     EC_FUNC(3)
-+#define EC_FUNC_RXRETURN                       EC_FUNC(4)
-+#define EC_FUNC_SEND                           EC_FUNC(5)
-+#define EC_FUNC_RXINT                          EC_FUNC(6)
-+#define EC_FUNC_TXINT                          EC_FUNC(7)
-+#define EC_FUNC_AAL2_VDMA                      EC_FUNC(8)
-+#define EC_FUNC_OPTIONS                        EC_FUNC(9)
-+#define EC_FUNC_PROBE                          EC_FUNC(10)
-+#define EC_FUNC_OPEN                           EC_FUNC(11)
-+#define EC_FUNC_CONTROL                        EC_FUNC(12)
-+#define EC_FUNC_DEVICE_INT                     EC_FUNC(13)
-+#define EC_FUNC_STATUS                         EC_FUNC(14)
-+#define EC_FUNC_TICK                           EC_FUNC(15)
-+#define EC_FUNC_CLOSE                          EC_FUNC(16)
-+#define EC_FUNC_SHUTDOWN                       EC_FUNC(17)
-+#define EC_FUNC_DEVICE_INT_ALT                 EC_FUNC(18) /* +GSG 030306 */
-+
-+/*
-+HAL Error Codes.  The list below defines every type of error
-+used in all HAL modules. DO NOT CHANGE THESE VALUES!  Add new
-+values in integer order to the bottom of the list.
-+*/
-+#define EC_VAL_PDSP_LOAD_FAIL                 EC_ERR(0x01)|EC_CRITICAL
-+#define EC_VAL_FIRMWARE_TOO_LARGE             EC_ERR(0x02)|EC_CRITICAL
-+#define EC_VAL_DEVICE_NOT_FOUND               EC_ERR(0x03)|EC_CRITICAL
-+#define EC_VAL_BASE_ADDR_NOT_FOUND            EC_ERR(0x04)|EC_CRITICAL
-+#define EC_VAL_RESET_BIT_NOT_FOUND            EC_ERR(0x05)|EC_CRITICAL
-+#define EC_VAL_CH_INFO_NOT_FOUND              EC_ERR(0x06)
-+#define EC_VAL_RX_STATE_RAM_NOT_CLEARED       EC_ERR(0x07)|EC_CRITICAL
-+#define EC_VAL_TX_STATE_RAM_NOT_CLEARED       EC_ERR(0x08)|EC_CRITICAL
-+#define EC_VAL_MALLOC_DEV_FAILED              EC_ERR(0x09)
-+#define EC_VAL_OS_VERSION_NOT_SUPPORTED       EC_ERR(0x0A)|EC_CRITICAL
-+#define EC_VAL_CPSAR_VERSION_NOT_SUPPORTED    EC_ERR(0x0B)|EC_CRITICAL
-+#define EC_VAL_NULL_CPSAR_DEV                 EC_ERR(0x0C)|EC_CRITICAL
-+
-+#define EC_VAL_LUT_NOT_READY                  EC_ERR(0x0D)
-+#define EC_VAL_INVALID_CH                     EC_ERR(0x0E)
-+#define EC_VAL_NULL_CH_STRUCT                 EC_ERR(0x0F)
-+#define EC_VAL_RX_TEARDOWN_ALREADY_PEND       EC_ERR(0x10)
-+#define EC_VAL_TX_TEARDOWN_ALREADY_PEND       EC_ERR(0x11)
-+#define EC_VAL_RX_CH_ALREADY_TORNDOWN         EC_ERR(0x12)
-+#define EC_VAL_TX_CH_ALREADY_TORNDOWN         EC_ERR(0x13)
-+#define EC_VAL_TX_TEARDOWN_TIMEOUT            EC_ERR(0x14)
-+#define EC_VAL_RX_TEARDOWN_TIMEOUT            EC_ERR(0x15)
-+#define EC_VAL_CH_ALREADY_TORNDOWN            EC_ERR(0x16)
-+#define EC_VAL_VC_SETUP_NOT_READY             EC_ERR(0x17)
-+#define EC_VAL_VC_TEARDOWN_NOT_READY          EC_ERR(0x18)
-+#define EC_VAL_INVALID_VC                     EC_ERR(0x19)
-+#define EC_VAL_INVALID_LC                     EC_ERR(0x20)
-+#define EC_VAL_INVALID_VDMA_CH                EC_ERR(0x21)
-+#define EC_VAL_INVALID_CID                    EC_ERR(0x22)
-+#define EC_VAL_INVALID_UUI                    EC_ERR(0x23)
-+#define EC_VAL_INVALID_UUI_DISCARD            EC_ERR(0x24)
-+#define EC_VAL_CH_ALREADY_OPEN                EC_ERR(0x25)
-+
-+#define EC_VAL_RCB_MALLOC_FAILED              EC_ERR(0x26)
-+#define EC_VAL_RX_BUFFER_MALLOC_FAILED        EC_ERR(0x27)
-+#define EC_VAL_OUT_OF_TCBS                    EC_ERR(0x28)
-+#define EC_VAL_NO_TCBS                        EC_ERR(0x29)
-+#define EC_VAL_NULL_RCB                       EC_ERR(0x30)|EC_CRITICAL
-+#define EC_VAL_SOP_ERROR                      EC_ERR(0x31)|EC_CRITICAL
-+#define EC_VAL_EOP_ERROR                      EC_ERR(0x32)|EC_CRITICAL
-+#define EC_VAL_NULL_TCB                       EC_ERR(0x33)|EC_CRITICAL
-+#define EC_VAL_CORRUPT_RCB_CHAIN              EC_ERR(0x34)|EC_CRITICAL
-+#define EC_VAL_TCB_MALLOC_FAILED              EC_ERR(0x35)
-+
-+#define EC_VAL_DISABLE_POLLING_FAILED         EC_ERR(0x36)
-+#define EC_VAL_KEY_NOT_FOUND                  EC_ERR(0x37)
-+#define EC_VAL_MALLOC_FAILED                  EC_ERR(0x38)
-+#define EC_VAL_RESET_BASE_NOT_FOUND           EC_ERR(0x39)|EC_CRITICAL
-+#define EC_VAL_INVALID_STATE                  EC_ERR(0x40)
-+#define EC_VAL_NO_TXH_WORK_TO_DO              EC_ERR(0x41)
-+#define EC_VAL_NO_TXL_WORK_TO_DO              EC_ERR(0x42)
-+#define EC_VAL_NO_RX_WORK_TO_DO               EC_ERR(0x43)
-+#define EC_VAL_NOT_LINKED                     EC_ERR(0x44)
-+#define EC_VAL_INTERRUPT_NOT_FOUND            EC_ERR(0x45)
-+#define EC_VAL_OFFSET_NOT_FOUND               EC_ERR(0x46)
-+#define EC_VAL_MODULE_ALREADY_CLOSED          EC_ERR(0x47)
-+#define EC_VAL_MODULE_ALREADY_SHUTDOWN        EC_ERR(0x48)
-+#define EC_VAL_ACTION_NOT_FOUND               EC_ERR(0x49)
-+#define EC_VAL_RX_CH_ALREADY_SETUP            EC_ERR(0x50)
-+#define EC_VAL_TX_CH_ALREADY_SETUP            EC_ERR(0x51)
-+#define EC_VAL_RX_CH_ALREADY_OPEN             EC_ERR(0x52)
-+#define EC_VAL_TX_CH_ALREADY_OPEN             EC_ERR(0x53)
-+#define EC_VAL_CH_ALREADY_SETUP               EC_ERR(0x54)
-+#define EC_VAL_RCB_NEEDS_BUFFER               EC_ERR(0x55) /* +GSG 030410 */
-+#define EC_VAL_RCB_DROPPED                    EC_ERR(0x56) /* +GSG 030410 */
-+#define EC_VAL_INVALID_VALUE                  EC_ERR(0x57)
-+
-+/**
-+@defgroup shared_data Shared Data Structures
-+
-+The data structures documented here are shared by all modules.
-+*/
-+
-+/**
-+ *  @ingroup shared_data
-+ *  This is the fragment list structure.  Each fragment list entry contains a
-+ *  length and a data buffer.
-+ */
-+typedef struct
-+  {
-+   bit32u   len;    /**< Length of the fragment in bytes (lower 16 bits are valid).  For SOP, upper 16 bits is the buffer offset. */
-+   void     *data;  /**< Pointer to fragment data. */
-+   void     *OsInfo; /**< Pointer to OS defined data. */
-+  }FRAGLIST;
-+
-+#if defined (_CPHAL_CPMAC)
-+#define CB_PASSCRC_BIT     (1<<26)
-+
-+/* CPMAC CPHAL STATUS */
-+#define CPMAC_STATUS_LINK               (1 << 0)
-+#define CPMAC_STATUS_LINK_DUPLEX        (1 << 1)  /* 0 - HD, 1 - FD */
-+#define CPMAC_STATUS_LINK_SPEED         (1 << 2)  /* 0 - 10, 1 - 100 */
-+
-+/*   ADAPTER CHECK Codes */
-+
-+#define CPMAC_STATUS_ADAPTER_CHECK             (1 << 7)
-+#define CPMAC_STATUS_HOST_ERR_DIRECTION        (1 << 8)
-+#define CPMAC_STATUS_HOST_ERR_CODE             (0xF << 9)
-+#define CPMAC_STATUS_HOST_ERR_CH               (0x7 << 13)
-+
-+#define _CPMDIO_DISABLE                 (1 << 0)
-+#define _CPMDIO_HD                      (1 << 1)
-+#define _CPMDIO_FD                      (1 << 2)
-+#define _CPMDIO_10                      (1 << 3)
-+#define _CPMDIO_100                     (1 << 4)
-+#define _CPMDIO_NEG_OFF                 (1 << 5)
-+#define _CPMDIO_LOOPBK                  (1 << 16)
-+#define _CPMDIO_AUTOMDIX                (1 << 17)   /* Bit 16 and above not used by MII register */
-+#define _CPMDIO_NOPHY                   (1 << 20)
-+#endif
-+
-+/**
-+ *  @ingroup shared_data
-+ *  Channel specific configuration information.  This structure should be
-+ *  populated by upper-layer software prior to calling @c ChannelSetup().  Any
-+ *  configuration item that can be changed on a per channel basis should
-+ *  be represented here.  Each module may define this structure with additional
-+ *  module-specific members.
-+ */
-+typedef struct
-+  {
-+   int Channel;        /**< Channel number. */
-+   int Direction;      /**< DIRECTION_RX(1) or DIRECTION_TX(0). */
-+   OS_SETUP *OsSetup;  /**< OS defined information associated with this channel. */
-+
-+#if defined(_CPHAL_AAL5) || defined (_CPHAL_CPSAR) || defined (_CPHAL_CPMAC)
-+   int RxBufSize;      /**< Size (in bytes) for each Rx buffer.*/
-+   int RxBufferOffset; /**< Number of bytes to offset rx data from start of buffer (must be less than buffer size). */
-+   int RxNumBuffers;   /**< The number of Rx buffer descriptors to allocate for Ch. */
-+   int RxServiceMax;   /**< Maximum number of packets to service at one time. */
-+
-+   int TxNumBuffers;   /**< The number of Tx buffer descriptors to allocate for Ch. */
-+   int TxNumQueues;    /**< Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. */
-+   int TxServiceMax;   /**< Maximum number of packets to service at one time. */
-+#endif
-+
-+#if defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+   int CpcsUU;      /**< The 2-byte CPCS UU and CPI information. */
-+   int Gfc;         /**< Generic Flow Control. */
-+   int Clp;         /**< Cell Loss Priority. */
-+   int Pti;         /**< Payload Type Indication. */
-+#endif
-+
-+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+   int DaMask;      /**< Specifies whether credit issuance is paused when Tx data not available. */
-+   int Priority;    /**< Priority bin this channel will be scheduled within. */
-+   int PktType;     /**< 0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2. */
-+   int Vci;         /**< Virtual Channel Identifier. */
-+   int Vpi;         /**< Virtual Path Identifier. */
-+   int FwdUnkVc;    /**< Enables forwarding of unknown VCI/VPI cells to host. 1=enable, 0=disable. */
-+
-+   /* Tx VC State */
-+   int TxVc_CellRate;  /**< Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR). */
-+   int TxVc_QosType;   /**< 0=CBR,1=VBR,2=UBR,3=UBRmcr. */
-+   int TxVc_Mbs;       /**< Min Burst Size in cells.*/
-+   int TxVc_Pcr;       /**< Peak Cell Rate for VBR in clock ticks between transmissions. */
-+
-+   bit32 TxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Tx Ch (must be big endian with 0 PTI). */
-+   int TxVc_OamTc;     /**< TC Path to transmit OAM cells for TX connection (0,1). */
-+   int TxVc_VpOffset;  /**< Offset to the OAM VP state table. */
-+   /* Rx VC State */
-+   int RxVc_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
-+   int RxVc_OamToHost; /**< 0=do not pass, 1=pass. */
-+   bit32 RxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx conn (must be big endian with 0 PTI). */
-+   int RxVc_OamTc;     /**< TC Path to transmit OAM cells for RX connection (0,1). */
-+   int RxVc_VpOffset;  /**< Offset to the OAM VP state table. */
-+   /* Tx VP State */
-+   int TxVp_OamTc;     /**< TC Path to transmit OAM cells for TX VP connection (0,1). */
-+   bit32 TxVp_AtmHeader; /**< ATM Header placed on firmware gen'd VP OAM cells for this Tx VP conn (must be big endian with 0 VCI). */
-+   /* Rx VP State  */
-+   int RxVp_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
-+   int RxVp_OamToHost; /**< 0=do not pass, 1=pass. */
-+   bit32 RxVp_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx VP conn (must be big endian with 0 VCI). */
-+   int RxVp_OamTc;     /**< TC Path to transmit OAM cells for RX VP connection (0,1). */
-+   int RxVp_OamVcList; /**< Indicates all VC channels associated with this VP channel (one-hot encoded). */
-+#endif
-+
-+
-+#ifdef _CPHAL_VDMAVT
-+   bit32u RemFifoAddr; /* Mirror mode only. */
-+   bit32u FifoAddr;
-+   bit32  PollInt;
-+   bit32  FifoSize;
-+   int    Ready;
-+#endif
-+
-+  }CHANNEL_INFO;
-+
-+/*
-+ *  This structure contains each statistic value gathered by the CPHAL.
-+ *  Applications may access statistics data by using the @c StatsGet() routine.
-+ */
-+/* STATS */
-+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+typedef struct
-+  {
-+   bit32u CrcErrors[16];
-+   bit32u LenErrors[16];
-+   bit32u DmaLenErrors[16];
-+   bit32u AbortErrors[16];
-+   bit32u StarvErrors[16];
-+   bit32u TxMisQCnt[16][2];
-+   bit32u RxMisQCnt[16];
-+   bit32u RxEOQCnt[16];
-+   bit32u TxEOQCnt[16][2];
-+   bit32u RxPacketsServiced[16];
-+   bit32u TxPacketsServiced[16][2];
-+   bit32u RxMaxServiced;
-+   bit32u TxMaxServiced[16][2];
-+   bit32u RxTotal;
-+   bit32u TxTotal;
-+  } STAT_INFO;
-+#endif
-+
-+/*
-+ *  VDMA Channel specific configuration information
-+ */
-+#ifdef _CPHAL_AAL2
-+typedef struct
-+  {
-+   int Ch;           /**< Channel Number */
-+   int RemoteEndian; /**< Endianness of remote VDMA-VT device */
-+   int CpsSwap;      /**< When 0, octet 0 in CPS pkt located in LS byte of 16-bit word sent to rem VDMA device.  When 1, in MS byte. */
-+  }VdmaChInfo;
-+#endif
-+
-+#ifndef _CPHAL
-+  typedef void HAL_DEVICE;
-+  typedef void HAL_PRIVATE;
-+  typedef void HAL_RCB;
-+  typedef void HAL_RECEIVEINFO;
-+#endif
-+
-+/**
-+ *  @ingroup shared_data
-+ *  The HAL_FUNCTIONS struct defines the function pointers used by upper layer
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to xxxInitModule().
-+ */
-+typedef struct
-+  {
-+  int  (*ChannelSetup)    (HAL_DEVICE *HalDev, CHANNEL_INFO *Channel, OS_SETUP *OsSetup);
-+  int  (*ChannelTeardown) (HAL_DEVICE *HalDev, int Channel, int Mode);
-+  int  (*Close)           (HAL_DEVICE *HalDev, int Mode);
-+  int  (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
-+  int  (*Init)            (HAL_DEVICE *HalDev);
-+  int  (*Open)            (HAL_DEVICE *HalDev);
-+  int  (*PacketProcessEnd) (HAL_DEVICE *HalDev);
-+  int  (*Probe)           (HAL_DEVICE *HalDev);
-+  int  (*RxReturn)        (HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
-+  int  (*Send)            (HAL_DEVICE *HalDev, FRAGLIST *FragList, int FragCount, int PacketSize, OS_SENDINFO *OsSendInfo, bit32u Mode);
-+  int  (*Shutdown)        (HAL_DEVICE *HalDev);
-+  int  (*Tick)            (HAL_DEVICE *HalDev);
-+
-+#ifdef _CPHAL_AAL5
-+  int  (*Kick) (HAL_DEVICE *HalDev, int Queue);
-+  void (*OamFuncConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig);
-+  void (*OamLoopbackConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag);
-+  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+  STAT_INFO*  (*StatsGetOld)(HAL_DEVICE *HalDev);
-+#endif
-+  } HAL_FUNCTIONS;
-+
-+/**
-+ *  @ingroup shared_data
-+ *  The OS_FUNCTIONS struct defines the function pointers for all upper layer
-+ *  functions accessible to the CPHAL.  The upper layer software is responsible
-+ *  for providing the correct OS-specific implementations for the following
-+ *  functions. It is populated by calling InitModule() (done by the CPHAL in
-+ *  xxxInitModule().
-+ */
-+typedef struct
-+  {
-+  int   (*Control)(OS_DEVICE *OsDev, const char *Key, const char *Action, void *Value);
-+  void  (*CriticalOn)(void);
-+  void  (*CriticalOff)(void);
-+  void  (*DataCacheHitInvalidate)(void *MemPtr, int Size);
-+  void  (*DataCacheHitWriteback)(void *MemPtr, int Size);
-+  int   (*DeviceFindInfo)(int Inst, const char *DeviceName, void *DeviceInfo);
-+  int   (*DeviceFindParmUint)(void *DeviceInfo, const char *Parm, bit32u *Value);
-+  int   (*DeviceFindParmValue)(void *DeviceInfo, const char *Parm, void *Value);
-+  void  (*Free)(void *MemPtr);
-+  void  (*FreeRxBuffer)(OS_RECEIVEINFO *OsReceiveInfo, void *MemPtr);
-+  void  (*FreeDev)(void *MemPtr);
-+  void  (*FreeDmaXfer)(void *MemPtr);
-+  void  (*IsrRegister)(OS_DEVICE *OsDev, int (*halISR)(HAL_DEVICE*, int*), int InterruptBit);
-+  void  (*IsrUnRegister)(OS_DEVICE *OsDev, int InterruptBit);
-+  void* (*Malloc)(bit32u size);
-+  void* (*MallocDev)(bit32u Size);
-+  void* (*MallocDmaXfer)(bit32u size, void *MemBase, bit32u MemRange);
-+  void* (*MallocRxBuffer)(bit32u size, void *MemBase, bit32u MemRange,
-+                       OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo,
-+                       OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev);
-+  void* (*Memset)(void *Dest, int C, bit32u N);
-+  int   (*Printf)(const char *Format, ...);
-+  int   (*Receive)(OS_DEVICE *OsDev,FRAGLIST *FragList,bit32u FragCount,
-+                 bit32u PacketSize,HAL_RECEIVEINFO *HalReceiveInfo, bit32u Mode);
-+  int   (*SendComplete)(OS_SENDINFO *OsSendInfo);
-+  int   (*Sprintf)(char *S, const char *Format, ...);
-+  int   (*Strcmpi)(const char *Str1, const char *Str2);
-+  unsigned int (*Strlen)(const char *S);
-+  char* (*Strstr)(const char *S1, const char *S2);
-+  unsigned long  (*Strtoul)(const char *Str, char **Endptr, int Base);
-+  void  (*TeardownComplete)(OS_DEVICE *OsDev, int Ch, int Direction);
-+  } OS_FUNCTIONS;
-+
-+/************** MODULE SPECIFIC STUFF BELOW **************/
-+
-+#ifdef _CPHAL_CPMAC
-+
-+/*
-+int halCpmacInitModule(HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, int (*osBridgeInitModule)(OS_FUNCTIONS *), void* (*osMallocDev) (bit32u), int *Size, int inst);
-+*/
-+
-+int halCpmacInitModule(HAL_DEVICE **HalDev,
-+                 OS_DEVICE *OsDev,
-+                 HAL_FUNCTIONS **HalFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+/*
-+ *  @ingroup shared_data
-+ *  The AAL5_FUNCTIONS struct defines the AAL5 function pointers used by upper layer
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to cphalInitModule().
-+ */
-+/*
-+typedef struct
-+  {
-+  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
-+  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
-+  int  (*Init)(HAL_DEVICE *HalDev);
-+  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
-+  int  (*Open)(HAL_DEVICE *HalDev);
-+  int  (*InfoGet)(HAL_DEVICE *HalDev, int Key, void *Value);
-+  int  (*Probe)(HAL_DEVICE *HalDev);
-+  int  (*RxReturn)(HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
-+  int  (*Send)(HAL_DEVICE *HalDev,FRAGLIST *FragList,int FragCount,
-+                 int PacketSize,OS_SENDINFO *OsSendInfo,int Ch, int Queue,
-+                 bit32u Mode);
-+  int  (*StatsClear)(HAL_DEVICE *HalDev);
-+  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
-+  int  (*Status)(HAL_DEVICE *HalDev);
-+  void (*Tick)(HAL_DEVICE *HalDev);
-+  int  (*Kick)(HAL_DEVICE *HalDev, int Queue);
-+  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+  } AAL5_FUNCTIONS;
-+*/
-+
-+int cpaal5InitModule(HAL_DEVICE **HalDev,
-+                 OS_DEVICE *OsDev,
-+                 HAL_FUNCTIONS **HalFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+/**
-+ *  @ingroup shared_data
-+ *  The AAL2_FUNCTIONS struct defines the AAL2 function pointers used by upper layer
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to cphalInitModule().
-+ */
-+typedef struct
-+  {
-+  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
-+  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
-+  int  (*Init)(HAL_DEVICE *HalDev);
-+  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
-+  int  (*Open)(HAL_DEVICE *HalDev);
-+  int  (*OptionsGet)(HAL_DEVICE *HalDev, char *Key, bit32u *Value);
-+  int  (*Probe)(HAL_DEVICE *HalDev);
-+
-+  int  (*StatsClear)(HAL_DEVICE *HalDev);
-+  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
-+  int  (*Status)(HAL_DEVICE *HalDev);
-+  void (*Tick)(HAL_DEVICE *HalDev);
-+  int  (*Aal2UuiMappingSetup)(HAL_DEVICE *HalDev, int VC, int UUI,
-+                                    int VdmaCh, int UUIDiscard);
-+  int  (*Aal2RxMappingSetup)(HAL_DEVICE *HalDev, int VC, int CID,
-+                                   int LC);
-+  int  (*Aal2TxMappingSetup)(HAL_DEVICE *HalDev, int VC, int LC, int VdmaCh);
-+  int  (*Aal2VdmaChSetup)(HAL_DEVICE *HalDev, bit32u RemVdmaVtAddr,
-+                               VdmaChInfo *VdmaCh);
-+  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+  int  (*Aal2ModeChange)(HAL_DEVICE *HalDev, int Vc, int RxCrossMode,
-+                           int RxMultiMode, int TxMultiMode, int SchedMode,
-+                           int TcCh);
-+  void (*Aal2VdmaEnable)(HAL_DEVICE *HalDev, int Ch);
-+  int  (*Aal2VdmaDisable)(HAL_DEVICE *HalDev, int Ch);
-+  } AAL2_FUNCTIONS;
-+
-+int cpaal2InitModule(HAL_DEVICE **HalDev,
-+                 OS_DEVICE *OsDev,
-+                 AAL2_FUNCTIONS **HalFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+#endif
-+
-+#ifdef _CPHAL_VDMAVT
-+/**
-+ *  @ingroup shared_data
-+ *  The VDMA_FUNCTIONS struct defines the HAL function pointers used by upper layer
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to InitModule().
-+ *
-+ *  Note that this list is still under definition.
-+ */
-+typedef struct
-+  {
-+  bit32  (*Init)( HAL_DEVICE *VdmaVtDev);
-+    /*  bit32  (*SetupTxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
-+                  bit32u Addr, bit32u Size, bit32u PollInt);
-+    bit32  (*SetupRxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
-+                  bit32u Addr, bit32u Size, bit32u PollInt); */
-+  bit32  (*Tx)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*Rx)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*SetRemoteChannel)(HAL_DEVICE *VdmaVtDev, bit32u RemAddr,
-+                         bit32u RemDevID);
-+  bit32  (*ClearRxInt)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*ClearTxInt)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*Open)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*Close)(HAL_DEVICE *VdmaVtDev);
-+  int    (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
-+  int    (*ChannelSetup)(HAL_DEVICE *VdmaVtDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+  int    (*ChannelTeardown)(HAL_DEVICE *VdmaVtDev, int Ch, int Mode);
-+  int    (*Send)(HAL_DEVICE *VdmaVtDev,FRAGLIST *FragList,int FragCount,
-+                 int PacketSize,OS_SENDINFO *OsSendInfo,bit32u Mode);
-+  } VDMA_FUNCTIONS;
-+
-+int VdmaInitModule(HAL_DEVICE **VdmaVt,
-+                 OS_DEVICE *OsDev,
-+                 VDMA_FUNCTIONS **VdmaVtFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+#endif
-+
-+/*
-+extern int cphalInitModule(MODULE_TYPE ModuleType, HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc,
-+                      int (*osInitModule)(OS_FUNCTIONS *), void* (*osMallocDev)(bit32u),
-+                      int *Size, int Inst);
-+*/
-+
-+
-+#ifdef _CPHAL_AAL5
-+extern const char hcSarFrequency[];
-+#endif
-+
-+#ifdef _CPHAL_CPMAC
-+/* following will be common, once 'utl' added */
-+extern const char hcClear[];
-+extern const char hcGet[];
-+extern const char hcSet[];
-+extern const char hcTick[];
-+
-+extern const char hcCpuFrequency[];
-+extern const char hcCpmacFrequency[];
-+extern const char hcMdioBusFrequency[];
-+extern const char hcMdioClockFrequency[];
-+extern const char hcCpmacBase[];
-+extern const char hcPhyNum[];
-+extern const char hcSize[];
-+extern const char hcCpmacSize[];
-+extern const char hcPhyAccess[];
-+extern const char hcMdixMask[];
-+extern const char hcMdioMdixSwitch[];
-+#endif
-+
-+#endif  /*  end of _INC_    */
-diff -urN linux.old/drivers/net/avalanche_cpmac/dox_cpmac.h linux.dev/drivers/net/avalanche_cpmac/dox_cpmac.h
---- linux.old/drivers/net/avalanche_cpmac/dox_cpmac.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/dox_cpmac.h	2005-07-12 02:48:42.050593000 +0200
-@@ -0,0 +1,842 @@
-+/*****************************************************************************
-+ *  TNETDxxxx Software Support
-+ *  Copyright (c) 2002,2003 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  FILE:
-+ *
-+ *  DESCRIPTION:
-+ *      This file contains documentation for the CPMAC
-+ *
-+ *  HISTORY:
-+ *  @author Michael Hanrahan/Greg Guyotte
-+ *  @version 1.00
-+ *  @date    03-Dec-2002
-+ *****************************************************************************/
-+#ifndef _DOX_CPMAC_H
-+#define _DOX_CPMAC_H
-+/**
-+@page CPMAC_Implementation_Details Version
-+
-+@copydoc CPMAC_Version
-+*/
-+
-+/**
-+@page cpmac_intro Introduction
-+
-+The CPMAC implementation will support 8 channels for transmit and 8 channel for
-+receive.  Each of the 8 transmit channels has 1 queue associated with it.  It is
-+recommended that only 1 channel is used for @c Receive() per processor.
-+*/
-+
-+/**
-+@page cpmac_details API Implementation Details
-+@par osReceive
-+@p Mode parameter
-+- The Upper 16 bits of Mode match Word 3 of the Rx Buffer Descriptor
-+
-+@par halSend
-+@p Mode parameter
-+-  Bits 0-7 contain the Channel Number
-+-  Bits 8-25 are reserved
-+-  Bit  26 - if 0, the CRC will be calculated, if 1 the CRC will be Passed
-+-  Bits 27-31 : reserved
-+@section cpmac_keys Control Keys
-+
-+@par StateChange
-+CPHAL calls the OS when a state change is detected.
-+OS should check the CPMAC Status. See the Control Key 'Status' for more details.
-+
-+@par Status
-+OS calls the CPHAL to obtain Status information. The Returned status is as follows
-+
-+@par MaxFrags
-+The OS may "Set" or "Get" this value.  This defines the maximum
-+number of fragments that can be received by the CPMAC Rx port.  The default
-+value for CPMAC is 2.  This provides enough space to receive a maximum
-+length packet (1,518 bytes) with the default buffer size of 1518 and any
-+amount of RxBufferOffset.  If the buffer size is configured to be smaller,
-+the OS *MUST* modify this parameter according to the following formula:
-+((System Max packet length)/(RxBufSize)) + 1.  (The extra 1 fragment is to
-+allow for RxBufferOffset)
-+
-+@code
-+// Following defined in "cpswhal_cpmac.h"
-+// CPMAC CPHAL STATUS
-+#define CPMAC_STATUS_LINK               (1 << 0)
-+#define CPMAC_STATUS_LINK_DUPLEX        (1 << 1)  // 0 - HD, 1 - FD
-+#define CPMAC_STATUS_LINK_SPEED         (1 << 2)  // 0 - 10, 1 - 100
-+
-+// ADAPTER CHECK Codes
-+#define CPMAC_STATUS_ADAPTER_CHECK             (1 << 7)
-+#define CPMAC_STATUS_HOST_ERR_DIRECTION        (1 << 8)    // 0 - Tx, 1 - Rx
-+#define CPMAC_STATUS_HOST_ERR_CODE             (0xF << 9)  See CPMAC Guide
-+#define CPMAC_STATUS_HOST_ERR_CH               (0x7 << 13) See CPMAC Guide
-+@endcode
-+
-+@code
-+void osStateChange(OS_DEVICE *OsDev)
-+  {
-+  int status;
-+  OsDev->HalFunc->Control(OsDev->HalDev, "Status", hcGet, &status);
-+  if(status & CPMAC_STATUS_ADAPTER_CHECK)
-+    {
-+    printf("[osStateChange[%d]]  HAL notified OS of AdapterCheck (Link Status 0x%08X)\n", OsDev->port, status);
-+    adaptercheck(OsDev->port);
-+    }
-+  else
-+    {
-+    printf("[osStateChange[%d]]  HAL notified OS of State Change (Link Status %s)\n", OsDev->port, (status & CPMAC_STATUS_LINK) ? "Up" : "Down");
-+    if(status & CPMAC_STATUS_LINK)
-+      {
-+      printf("Speed %s, Duplex %s\n",
-+      status & CPMAC_STATUS_LINK_SPEED ? "100" : "10",
-+      status & CPMAC_STATUS_LINK_DUPLEX ? "FD" : "HD");
-+      }
-+    }
-+@endcode
-+
-+@par Tick
-+     The CPHAL calls the OS to set the interval for calling halTick()<BR>
-+     Note: Predefined value hcTick now recommended for use.
-+@code
-+***  Example Code ***
-+
-+*** CPHAL code ***
-+int Ticks;
-+HalDev->OsFunc->Control(HalDev->OsDev, hcTick, hcSet, &Ticks);
-+
-+*** OS code ***
-+  ..
-+  if(osStrcmpi(pszKey, hcTick) == 0)
-+  {
-+    if(osStrcmpi(pszAction, hcSet) == 0)
-+    {
-+      // Enable the Tick Interval
-+      if(*(unsigned int *) ParmValue)
-+        printf("osTickSet: Interval = %d ticks\n", Interval);
-+    }
-+    else
-+    if(osStrcmpi(pszAction, hcClear) == 0)
-+    {
-+        // Request disabling of the Tick Timer, ParmValue is ignored
-+    }
-+  }
-+@endcode
-+
-+@par The following information can be obtained by the OS via 'Get'
-+
-+- StatsDump : OS supplies pointer to an 36 element unsigned int array
-+CPHAL will populate the array with the current Statistics values.<BR>
-+Note: all hcXXXX values are predefined and should be used by the OS.
-+
-+- hcPhyNum : Returns the PHY number.
-+- hcCpmacBase : Returns the base-address of the CPMAC device
-+- hcCpmacSize : Returns size of the CPMAC memory map
-+
-+
-+@par Phy Register Communication
-+
-+halControl() is used to read and write the Phy Registers via the key hcPhyAccess
-+
-+Both reading and writing the Phy registers involve setting the Value parameter of halControl()
-+<BR>
-+Value is a 32-bit value with bits partioned as follows
-+<BR>
-+
-+   0 -  4  Phy Number   <BR>
-+   5 -  9  Phy Register <BR>
-+  10 - 15  reserved     <BR>
-+  16 - 31  Data  (write only)
-+<BR>
-+
-+
-+<B>Reading the Phy register</B>
-+
-+@code
-+    bit32u Value;
-+    bit32u RegAddr;
-+    bit32u PhyNum;
-+    bit32u PhyRegisterData;
-+
-+    //  Read Phy 31, register 20
-+
-+    PhyNum  = 31;
-+    RegAddr = 20;
-+
-+    Value = (RegAddr << 5);
-+    Value |= (PhyNum & 0x1F);
-+
-+    rc  = HalFunc->Control(HalDev, hcPhyAccess, hcGet, (bit32u *) &Value)
-+    If(rc == 0)
-+    {
-+        // Value is overwriten with the value in Register 20 of Phy number 31.
-+        PhyRegisterData = Value;
-+    }
-+@endcode
-+
-+<B>Writing the Phy register</B>
-+@code
-+    bit32u Value;
-+    bit32u RegAddr;
-+    bit32u PhyNum;
-+    bit32u PhyRegisterData;
-+
-+    //  Reset Phy 23
-+
-+    PhyNum  = 23;
-+    RegAddr = 0;
-+    PhyRegisterData = 0x8000;  // Reset bit set
-+
-+    Value = (RegAddr << 5);
-+    Value |= (PhyNum & 0x1F);
-+    Value |= (PhyRegisterData << 16);
-+
-+    rc  = HalFunc->Control(HalDev, hcPhyAccess, hcSet, (bit32u *) &Value)
-+
-+    // Check is reset if done
-+
-+    PhyNum  = 23;
-+    RegAddr = 0;
-+
-+    Value = (RegAddr << 5);
-+    Value |= (PhyNum & 0x1F);
-+
-+    rc  = HalFunc->Control(HalDev, hcPhyAccess, hcGet, (bit32u *) &Value)
-+
-+    If(rc == 0)
-+    {
-+        // Value is overwriten with the value in Register 0 of Phy number 23.
-+        PhyRegisterData = Value;
-+        if((PhyRegisterData & 0x8000) == 0)
-+           ResetIsComplete;
-+    }
-+
-+@endcode
-+<B>
-+*** Example Showing turning values off/on ***
-+<BR>
-+</B>
-+
-+@code
-+
-+int On=1;
-+int Off=0;
-+   # Turn On loopback
-+   OsDev->HalFunc->Control(OsDev->HalDev, "CTRL_LOOPBACK", hcSet, (int*) &On);
-+
-+   #  Turn off RX Flow
-+   OsDev->HalFunc->Control(OsDev->HalDev, "RX_FLOW_EN", hcSet, (int*) &Off);
-+@endcode
-+
-+@par CPMAC Configurable Parameters
-+
-+- RX_PASS_CRC        : See MBP_Enable description
-+- RX_QOS_EN          : See MBP_Enable description
-+- RX_NO_CHAIN        : See MBP_Enable description
-+- RX_CMF_EN          : See MBP_Enable description
-+- RX_CSF_EN          : See MBP_Enable description
-+- RX_CEF_EN          : See MBP_Enable description
-+- RX_CAF_EN          : See MBP_Enable description
-+- RX_PROM_CH         : See MBP_Enable description
-+- RX_BROAD_EN        : See MBP_Enable description
-+- RX_BROAD_CH        : See MBP_Enable description
-+- RX_MULT_EN         : See MBP_Enable description
-+- RX_MULT_CH         : See MBP_Enable description
-+
-+- TX_PTYPE           : See MacControl description
-+- TX_PACE            : See MacControl description
-+- TX_FLOW_EN         : See MacControl description
-+- RX_FLOW_EN         : See MacControl description
-+- CTRL_LOOPBACK      : See MacControl description
-+
-+- RX_MAXLEN          : See CPMAC Guide
-+- RX_FILTERLOWTHRESH : See CPMAC Guide
-+- RX0_FLOWTHRESH     : See CPMAC Guide
-+- RX_UNICAST_SET     : See CPMAC Guide
-+- RX_UNICAST_CLEAR   : See CPMAC Guide
-+
-+@par Multicast Support
-+- RX_MULTI_ALL       : When used with hcSet, sets all the Hash Bits. When used
-+with hcClear clears all the Hash Bits.
-+- RX_MULTI_SINGLE    : When used with hcSet, adds the Hashed Mac Address. When used
-+with hcClear deletes the Hashed Mac Address.
-+Note: Support will be added to keep track of Single additions and deletions.
-+
-+@code
-+*** Example Code ***
-+
-+*** OS code ***
-+  bit8u  MacAddress[6];
-+  MacAddress[0] = 0x80;
-+  MacAddress[1] = 0x12;
-+  MacAddress[2] = 0x34;
-+  MacAddress[3] = 0x56;
-+  MacAddress[4] = 0x78;
-+  MacAddress[5] = 0x78;
-+  OsDev->HalFunc->Control(OsDev->HalDev, "RX_MULTI_SINGLE", hcSet, (bit8u*) &MacAddress);
-+  OsDev->HalFunc->Control(OsDev->HalDev, "RX_MULTI_SINGLE", hcClear, (bit8u*) &MacAddress);
-+  OsDev->HalFunc->Control(OsDev->HalDev, "RX_MULTI_ALL", hcSet, NULL);
-+  OsDev->HalFunc->Control(OsDev->HalDev, "RX_MULTI_ALL", hcClear, NULL);
-+@endcode
-+@par MdioConnect Fields
-+<BR>
-+- "MdioConnect"     : The OS can set the Phy connection using this key. The default connection is Auto-Negotiation ON, All modes possible.
-+
-+
-+- _CPMDIO_HD       <----- Allow Half Duplex, default is 1 (On)
-+- _CPMDIO_FD       <----- Allow Full Duplex, default is 1 (On)
-+- _CPMDIO_10       <----- Allow 10  Mbs, default is 1 (On)
-+- _CPMDIO_100      <----- Allow 100 Mbs, default is 1 (On)
-+- _CPMDIO_NEG_OFF  <----- Turn off Auto Negotiation, default is 0 (Auto Neg is on)
-+- _CPMDIO_NOPHY    <----- Set for use with Marvel-type switch, default is 0 (Phy present)
-+- _CPMDIO_AUTOMDIX  <---- Enables Auto Mdix (in conjunction with MdixMask), default is 1 (On)
-+
-+Note: When _CPMDIO_NOPHY is set, CPMAC will report being linked at 100/FD. Reported PhyNum will be 0xFFFFFFFF
-+
-+@par Setting CPMAC for use with a Marvel-type Switch
-+@code
-+     bit32u MdioConnect;
-+
-+     MdioConnect = _CPMDIO_NOPHY;
-+     OsDev->HalFunc->Control(OsDev->HalDev, "MdioConnect", hcSet, (bit32u*) &MdioConnect);
-+@endcode
-+
-+@par OS Support for MDIO
-+@p The OS will need to supply the following values which the CPHAL will request via halControl()
-+<BR>
-+- MdioBusFrequency : The frequency of the BUS that MDIO is on (requested via hcMdioBusFrequency)
-+<BR>
-+- MdioClockFrequency : The desired Clock Frequency that MDIO qill operate at (requested via hcMdioClockFrequency)
-+*/
-+
-+/**
-+@page cpmac_conf DeviceFindxxx() Parameters
-+
-+These are some of the parameters that the CPMAC will request via the DeviceFindxxx() functions -
-+<BR>
-+- "Mlink"    : bit mask indicating what link status method Phy is using. Default is MDIO state machine (0x0)
-+- "PhyMask"  : bit mask indicating PhyNums used by this CPMAC (e.g 0x8000000, PhyNum is 31)
-+- "MdixMask" : bit mask indicating which Phys support AutoMdix. Default is 0x0 (None)
-+<BR>
-+@par Example cpmac definition from the options.conf for the Sangam VDB
-+<BR>
-+- cpmac( id=eth0, base=0xA8610000, size=0x800, reset_bit=17, int_line=19, PhyMask=0x80000000, MLink=0, MdixMask=0 )
-+*/
-+
-+/**
-+@page auto_mdix Auto Mdix Support
-+
-+Auto Mdix selection is controlled by two elements in the CPMAC. First the OS can turn Auto Midx On or Off by the use of the
-+MdioConnect field, _CPMDIO_AUTOMDIX. This is defaulted ON.  For actual Auto Mdix operation the Phy must also be Auto Mdix capable.
-+This is specified by the DeviceFindxxx() field, "MdixMask" (supplied as the variable hcMdixMask).
-+If both these fields are set then the CPMDIO state machine will be enabled for Auto Mdix checking.
-+If a switch to MDI or MDIX mode is needed, the CPMAC will signal this to the OS via Control() using
-+the hcMdioMdixSwitch key.
-+
-+@par OS example for responding to a Mdix Switch Request
-+<BR>
-+@code
-+if(osStrcmpi(pszKey, hcMdioMdixSwitch) == 0)  // See if key is Mdix Switch Request
-+  {
-+      if(osStrcmpi(pszAction, hcSet) == 0)   // Only respond to Set requests
-+      {
-+
-+          bit32u Mdix;
-+
-+          Mdix = *(bit32u *) ParmValue;     // Extract requested Mode
-+                                            // 0 : MDI
-+                                            // 1 : MDIX
-+          if(Mdix)
-+            osSetPhyIntoMdixMode();         // Device specific logic
-+          else
-+            osSetPhyIntoMdiMode();          // Device specific logic
-+          rc = 0;                           // Set return code as Successfull
-+      }
-+@endcode
-+*/
-+
-+/**
-+@page cpmac_stats CPMAC Specific Statistics
-+
-+Statistics level '0' contains all CPMAC specific statistics.
-+
-+
-+*/
-+
-+/**
-+@page Example_Driver_Code
-+
-+@section  example_intro Introduction
-+This section provides an in-depth code example for driver implementations.  The code
-+below illustrates the use of the CPMAC HAL, but is equally applicable to any CPHAL
-+implementation. Note: the CPHAl constants hcGet, hcSet etc., are currently available for use with teh CPMAC module.
-+Other modules should continue to use pszGET, etc. until these are made generally available.
-+
-+@par Pull Model Example
-+
-+@code
-+
-+#define _CPHAL_CPMAC
-+
-+typedef struct _os_device_s  OS_DEVICE;
-+typedef struct _os_receive_s OS_RECEIVEINFO;
-+typedef struct _os_send_s    OS_SENDINFO;
-+typedef struct _os_setup_s   OS_SETUP;
-+
-+#include "cpswhal_cpmac.h"
-+
-+#define dbgPrintf printf
-+
-+typedef struct  _os_device_s
-+{
-+   HAL_DEVICE    *HalDev;
-+   HAL_FUNCTIONS *HalFunc;
-+   OS_FUNCTIONS  *OsFunc;
-+   OS_SETUP      *OsSetup;
-+   bit32u        Interrupt;
-+   int           (*halIsr)(HAL_DEVICE  *HalDev, int*);
-+   int           ModulePort;
-+   int           Protocol;
-+   int           LinkStatus;  // 0-> down, otherwise up
-+}os_device_s;
-+
-+typedef struct  _os_receive_s
-+{
-+   HAL_RECEIVEINFO *HalReceiveInfo;
-+   char   *ReceiveBuffer;
-+   OS_DEVICE  *OsDev;
-+}os_receive_s;
-+
-+typedef struct  _os_send_s
-+{
-+   OS_DEVICE  *OsDev;
-+}os_send_s;
-+
-+typedef struct  _os_setup_s
-+{
-+   OS_DEVICE  *OsDev;
-+}os_setup_s;
-+
-+
-+
-+void FlowForCphal(OS_DEVICE *OsDev)
-+{
-+  CHANNEL_INFO ChannelInfo;
-+  int nChannels = 200;
-+  int halFuncSize;
-+  int rc;
-+
-+  //  Populate OsFunc structure
-+  rc =  osInitModule(OsDev);
-+
-+  if(rc)
-+  {
-+    sprintf(bufTmp, "%s: return code from osInitModule:'0x%08X'", __FUNCTION__, rc);
-+    errorout(bufTmp);
-+  }
-+
-+
-+  //  OS-Cphal handshake
-+  rc = halCpmacInitModule(&OsDev->HalDev, OsDev, &OsDev->HalFunc, OsDev->OsFunc,
-+                              sizeof(OS_FUNCTIONS), &halFuncSize, OsDev->ModulePort);
-+
-+  if(rc)
-+  {
-+    sprintf(bufTmp, "%s: return code from halCpmacInitModule:'0x%08X'", __FUNCTION__, rc);
-+    errorout(bufTmp);
-+  }
-+
-+  // See if hardware module exists
-+  rc = OsDev->HalFunc->Probe(OsDev->HalDev);
-+
-+  if(rc)
-+  {
-+    sprintf(bufTmp, "%s: return code from Probe:'0x%08X'", __FUNCTION__, rc);
-+    errorout(bufTmp);
-+  }
-+
-+  // Initialize hardware module
-+  rc = OsDev->HalFunc->Init(OsDev->HalDev);
-+
-+  if(rc)
-+  {
-+    sprintf(bufTmp, "%s: return code from Init:'0x%08X'", __FUNCTION__, rc);
-+    errorout(bufTmp);
-+  }
-+
-+  // Setup Channel Information (Tranmsit, channel 0)
-+  ChannelInfo.Channel      = 0;
-+  ChannelInfo.Direction    = DIRECTION_TX;
-+  ChannelInfo.TxNumBuffers = nChannels;
-+  ChannelInfo.TxNumQueues  = 1;
-+  ChannelInfo.TxServiceMax = nChannels/3;
-+
-+  rc = OsDev->HalFunc->ChannelSetup(OsDev->HalDev, &ChannelInfo, OsDev->OsSetup);
-+
-+  // Setup Channel Information (Receive, channel 0)
-+  ChannelInfo.Channel        = 0;
-+  ChannelInfo.Direction      = DIRECTION_RX;
-+  ChannelInfo.RxBufSize      = 1518;
-+  ChannelInfo.RxBufferOffset = 0;
-+  ChannelInfo.RxNumBuffers   = 2*nChannels;
-+  ChannelInfo.RxServiceMax   = nChannels/3;
-+
-+  rc = OsDev->HalFunc->ChannelSetup(OsDev->HalDev, &ChannelInfo, OsDev->OsSetup);
-+
-+  // Open the hardware module
-+  rc = OsDev->HalFunc->Open(OsDev->HalDev);
-+
-+  // Module now ready to Send/Receive data
-+}
-+
-+
-+int osInitModule(OS_FUNCTIONS **pOsFunc)
-+  {
-+   OS_FUNCTIONS *OsFunc;
-+
-+   OsFunc = (OS_FUNCTIONS *) malloc(sizeof(OS_FUNCTIONS));
-+   if (!OsFunc)
-+     return (-1);
-+
-+   *pOsFunc = OsFunc;
-+
-+   OsFunc->CriticalOff               = osCriticalOff;
-+   OsFunc->CriticalOn                = osCriticalOn;
-+   OsFunc->DataCacheHitInvalidate    = osDataCacheHitInvalidate;
-+   OsFunc->DataCacheHitWriteback     = osDataCacheHitWriteback;
-+   OsFunc->DeviceFindInfo            = osDeviceFindInfo;
-+   OsFunc->DeviceFindParmUint        = osDeviceFindParmUint;
-+   OsFunc->DeviceFindParmValue       = osDeviceFindParmValue;
-+   OsFunc->Free                      = osFree;
-+   OsFunc->FreeDev                   = osFreeDev;
-+   OsFunc->FreeDmaXfer               = osFreeDmaXfer;
-+   OsFunc->FreeRxBuffer              = osFreeRxBuffer;
-+   OsFunc->IsrRegister               = osIsrRegister;
-+   OsFunc->IsrUnRegister             = osIsrUnRegister;
-+   OsFunc->Malloc                    = osMalloc;
-+   OsFunc->MallocDev                 = osMallocDev;
-+   OsFunc->MallocDmaXfer             = osMallocDmaXfer;
-+   OsFunc->MallocRxBuffer            = osMallocRxBuffer;
-+
-+
-+   OsFunc->Memset                    = memset;
-+   OsFunc->Printf                    = printf;
-+   OsFunc->Sprintf                   = sprintf;
-+   OsFunc->Strcmpi                   = osStrcmpi;
-+   OsFunc->Strlen                    = strlen;
-+   OsFunc->Strstr                    = strstr;
-+   OsFunc->Strtoul                   = strtoul;
-+
-+   OsFunc->Control                   = osControl;
-+   OsFunc->Receive                   = osReceive;
-+   OsFunc->SendComplete              = osSendComplete;
-+   OsFunc->TeardownComplete          = osTearDownComplete;
-+
-+   return(0);
-+  }
-+
-+
-+int osReceive(OS_DEVICE *OsDev,FRAGLIST *Fraglist,bit32u FragCount,bit32u PacketSize,HAL_RECEIVEINFO *halInfo, bit32u mode)
-+  {
-+  OS_RECEIVEINFO *skb = (OS_RECEIVEINFO *)Fraglist[0].OsInfo;
-+  dcache_i((char *)Fraglist->data, Fraglist->len);
-+  OsDev->HalFunc->RxReturn(halInfo,0);
-+  return(0);
-+  }
-+
-+int osSendComplete(OS_SENDINFO *skb)
-+  {
-+  return(0);
-+  }
-+
-+
-+static void *osMallocRxBuffer(bit32u Size,void *MemBase, bit32u MemRange,
-+                              OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo,
-+                              OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev )
-+  {
-+   void *HalBuffer;
-+   OS_RECEIVEINFO *OsPriv;
-+
-+   HalBuffer=malloc(Size);
-+   if (!HalBuffer)
-+     {
-+      return(0);
-+     }
-+
-+   // Malloc the OS block
-+   *OsReceiveInfo = malloc(sizeof(OS_RECEIVEINFO));
-+   if (!*OsReceiveInfo)
-+     {
-+      free(HalBuffer);
-+      return(0);
-+     }
-+
-+   // Initialize the new buffer descriptor
-+   OsPriv                 = *OsReceiveInfo;
-+   OsPriv->OsDev          =  OsDev;
-+   OsPriv->ReceiveBuffer  =  HalBuffer;
-+   OsPriv->HalReceiveInfo =  HalReceiveInfo;
-+
-+   return(HalBuffer);
-+  }
-+
-+
-+void SendBuffer(OS_DEVICE *OsDev, char *Buffer, int Size)
-+{
-+  FRAGLIST Fraglist;
-+  bit32u FragCount;
-+
-+  tcb_pending++;
-+  Fraglist.len  = Size;
-+  Fraglist.data = (unsigned *) Buffer;
-+  FragCount     = 1;
-+  mode          = 0;   //  Channel 0
-+
-+  dcache_wb(Fraglist.data, Fraglist.len);
-+  OsDev->HalFunc->Send(OsDev->HalDev, &Fraglist, FragCount, Size, (OS_SENDINFO *) Buffer, mode);
-+}
-+
-+
-+void osStateChange(OS_DEVICE *OsDev)
-+  {
-+  int status;
-+  int LinkStatus;
-+  OsDev->HalFunc->Control(OsDev->HalDev, "Status", hcGet, &status);
-+  if(status & CPMAC_STATUS_ADAPTER_CHECK)
-+    {
-+    //  Adapter Check, take appropiate action
-+    }
-+  else
-+    {
-+    LinkStatus = status & CPMAC_STATUS_LINK;
-+    if(LinkStatus != OsDev->LinkStatus)
-+      {
-+      dbgPrintf("\n%s:Link %s for inst %d Speed %s, Duplex %s\n",
-+                 __FUNCTION__,
-+                 LinkStatus ? "up" : "down",
-+                 OsDev->ModulePort,
-+                 status & CPMAC_STATUS_LINK_SPEED ? "100" : "10",
-+                 status & CPMAC_STATUS_LINK_DUPLEX ? "FD" : "HD");
-+      OsDev->LinkStatus = LinkStatus;
-+      }
-+    }
-+  }
-+
-+
-+int osControl(OS_DEVICE *OsDev, const char *pszKey, const char* pszAction, void *ParmValue)
-+  {
-+  int rc=-1;
-+
-+  if (osStrcmpi(pszKey, hcCpuFrequency) == 0)
-+   {
-+   if(osStrcmpi(pszAction, hcGet) == 0)
-+     {
-+     *(bit32u*) ParmValue = cpufreq;
-+     rc = 0;
-+     }
-+   }
-+  if (osStrcmpi(pszKey, hcMdioBusFrequency) == 0)
-+   {
-+   if(osStrcmpi(pszAction, hcGet) == 0)
-+     {
-+     *(bit32u *)ParmValue = MdioBusFrequency;
-+     rc = 0;
-+     }
-+   }
-+if (osStrcmpi(pszKey, hcMdioClockFrequency) == 0)
-+   {
-+   if(osStrcmpi(pszAction, hcGet) == 0)
-+     {
-+     *(bit32u *)ParmValue = MdioClockFrequency;
-+     rc = 0;
-+     }
-+   }
-+
-+  if (osStrcmpi(pszKey, hcTick) == 0)
-+   {
-+   if(osStrcmpi(pszAction, hcSet) == 0)
-+     {
-+       osTickSetInterval(OsDev, *(unsigned int *) ParmValue);
-+       rc = 0;
-+     }
-+   else
-+   if(osStrcmpi(pszAction, hcClear) == 0)
-+     {
-+       osTickDisable(OsDev);
-+       rc = 0;
-+     }
-+   }
-+
-+  if (osStrcmpi(pszKey, "SioFlush") == 0)
-+    {
-+       MySioFlush();
-+       rc = 0;
-+    }
-+
-+  if (osStrcmpi(pszKey, "StateChange") == 0)
-+    {
-+       osStateChange(OsDev);
-+       rc = 0;
-+    }
-+
-+  if (osStrcmpi(pszKey, "Sleep") == 0)
-+    {
-+       osSleep(*(int *)ParmValue);
-+       rc = 0;
-+    }
-+  return(rc);
-+  }
-+
-+@endcode
-+
-+
-+@par Push Model Example (Currently Eswitch ONLY)
-+
-+@code
-+
-+typedef struct _os_device_s  OS_DEVICE;
-+typedef struct _os_receive_s OS_RECEIVEINFO;
-+typedef struct _os_send_s    OS_SENDINFO;
-+typedef struct _os_setup_s   OS_SETUP;
-+
-+#include "cpswhal.h"          //Get glogal HAL stuff
-+#include "cpswhaleswitch.h"   //Get device specific hal stuff
-+
-+
-+typedef struct  _os_device_s
-+{
-+   HAL_DEVICE    *HalDev;
-+   HAL_FUNCTIONS *HalFunc;
-+   OS_FUNCTIONS  *OsFunc;
-+   OS_SETUP      *OsSetup;
-+   bit32u        Interrupt;
-+   int           (*halIsr)(HAL_DEVICE  *HalDev, int*);
-+   int           ModulePort;
-+   int           Protocol;
-+   int           LinkStatus;  // 0-> down, otherwise up
-+}os_device_s;
-+
-+typedef struct  _os_receive_s
-+{
-+   HAL_RECEIVEINFO *HalReceiveInfo;
-+   char   *ReceiveBuffer;
-+   OS_DEVICE  *OsDev;
-+}os_receive_s;
-+
-+typedef struct  _os_send_s
-+{
-+   OS_DEVICE  *OsDev;
-+}os_send_s;
-+
-+typedef struct  _os_setup_s
-+{
-+   OS_DEVICE  *OsDev;
-+}os_setup_s;
-+
-+
-+
-+void FlowForCphal(OS_DEVICE *OsDev)
-+{
-+CHANNEL_INFO ChannelInfo;
-+  int nChannels = 200;
-+  int halFuncSize;
-+  int rc;
-+
-+  //  Populate OsFunc structure
-+  rc =  osInitModule(OsDev);
-+
-+  if(rc)
-+  {
-+    sprintf(bufTmp, "%s: return code from osInitModule:'0x%08X'", __FUNCTION__, rc);
-+    errorout(bufTmp);
-+  }
-+
-+
-+  //  OS-Cphal handshake
-+  rc = cpswHalEswitchInitModule(&OsDev->HalDev, OsDev, &OsDev->HalFunc, OsDev->OsFunc,
-+                              sizeof(OS_FUNCTIONS), &halFuncSize, OsDev->ModulePort);
-+
-+  if(rc)
-+  {
-+    sprintf(bufTmp, "%s: return code from cpswHalEswitchInitModule:'0x%08X'", __FUNCTION__, rc);
-+    errorout(bufTmp);
-+  }
-+
-+
-+  ChannelInfo.Channel      = 7;
-+  ChannelInfo.Direction    = DIRECTION_RX;
-+  ChanInfo.Receive = osReceiveSS;         //  Specify function to receive data for this channel
-+
-+  rc = OsDev->HalFunc->ChannelSetup(OsDev->HalDev, &ChannelInfo, OsDev->OsSetup);
-+
-+  MyConfig.debug=0;
-+  MyConfig.CpuFrequency = CpuFreq;
-+  MyConfig.EswitchFrequency = EswitchFreq;
-+  MyConfig.ResetBase  = 0xa8611600;
-+  MyConfig.MacAddress = MacAddr;
-+
-+  MyConfig.EswitchResetBit= 27;
-+  MyConfig.Cpmac0ResetBit = 17;
-+  MyConfig.Cpmac1ResetBit = 21;
-+  MyConfig.MdioResetBit   = 22;
-+  MyConfig.Phy0ResetBit   = 26;
-+  MyConfig.Phy1ResetBit   = 28;
-+  MyConfig.HdmaResetBit   = 13;
-+  MyConfig.Cpmac0IntBit   = 19;
-+  MyConfig.Cpmac1IntBit   = 33;
-+  MyConfig.EswitchIntBit  = 27;
-+  MyConfig.EswitchBase    = 0xa8640000;
-+  MyConfig.EswitchBufferSize     = 64;
-+  MyConfig.EswitchHostBufCount   = 0;
-+  MyConfig.EswitchDefaultCamSize = 64;
-+  MyConfig.EswitchOverFlowCount  = 200;
-+  MyConfig.EswitchOverFlowSize   = 256;
-+
-+
-+
-+
-+  rc=EswitchConfig(HalDev,HalFunc,&MyConfig);
-+
-+
-+  // Open the hardware module
-+  rc = OsDev->HalFunc->Open(OsDev->HalDev);
-+
-+  // Module now ready to Send/Receive data
-+}
-+
-+
-+int EswitchConfig(HAL_DEVICE *HalDev, HAL_FUNCTIONS *HalFunc, ESWITCH_CONFIG *Config)
-+{
-+  bit32u sts;
-+  sts = 0;
-+
-+  sts |= cpswhalPushBin(hcdebug, Config->debug);
-+  sts |= cpswhalPushBin(hcCpuFrequency     , Config->CpuFrequency );
-+  sts |= cpswhalPushBin(hcEswitchFrequency , Config->EswitchFrequency );
-+  sts |= cpswhalPushBin(hcResetBase        , Config->ResetBase  );
-+  sts |= cpswhalPushBin(hcMacAddress       , Config->MacAddress );
-+  sts |= cpswhalPushBin(hcEswitchResetBit, Config->EswitchResetBit);
-+  sts |= cpswhalPushBin(hcCpmac0ResetBit , Config->Cpmac0ResetBit );
-+  sts |= cpswhalPushBin(hcCpmac1ResetBit , Config->Cpmac1ResetBit );
-+  sts |= cpswhalPushBin(hcMdioResetBit   , Config->MdioResetBit   );
-+  sts |= cpswhalPushBin(hcPhy0ResetBit   , Config->Phy0ResetBit   );
-+  sts |= cpswhalPushBin(hcPhy1ResetBit   , Config->Phy1ResetBit   );
-+  sts |= cpswhalPushBin(hcHdmaResetBit   , Config->HdmaResetBit   );
-+  sts |= cpswhalPushBin(hcCpmac0IntBit   , Config->Cpmac0IntBit   );
-+  sts |= cpswhalPushBin(hcCpmac1IntBit   , Config->Cpmac1IntBit   );
-+  sts |= cpswhalPushBin(hcEswitchIntBit  , Config->EswitchIntBit  );
-+  sts |= cpswhalPushBin(hcEswitchBase           , Config->EswitchBase    );
-+  sts |= cpswhalPushBin(hcEswitchBufferSize     , Config->EswitchBufferSize     );
-+  sts |= cpswhalPushBin(hcEswitchHostBufCount   , Config->EswitchHostBufCount   );
-+  sts |= cpswhalPushBin(hcEswitchDefaultCamSize , Config->EswitchDefaultCamSize );
-+  sts |= cpswhalPushBin(hcEswitchOverFlowCount  , Config->EswitchOverFlowCount  );
-+  sts |= cpswhalPushBin(hcEswitchOverFlowSize   , Config->EswitchOverFlowSize   );
-+  return(sts);
-+}
-+
-+
-+
-+@endcode
-+*/
-+
-+#endif
-diff -urN linux.old/drivers/net/avalanche_cpmac/ec_errors_cpmac.h linux.dev/drivers/net/avalanche_cpmac/ec_errors_cpmac.h
---- linux.old/drivers/net/avalanche_cpmac/ec_errors_cpmac.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/ec_errors_cpmac.h	2005-07-12 02:48:42.051592000 +0200
-@@ -0,0 +1,118 @@
-+/***************************************************************************
-+ Copyright(c) 2001, Texas Instruments Incorporated. All Rights Reserved.
-+
-+ FILE:  ec_errors.h
-+
-+ DESCRIPTION:
-+   This file contains definitions and function declarations for
-+   error code support.
-+
-+ HISTORY:
-+   14Dec00 MJH             Added masking to EC_CLASS etc macros
-+   17Sep02 GSG             Added HAL support (new class&devices)
-+   03Oct02 GSG             Removed C++ style comments
-+***************************************************************************/
-+#ifndef _INC_EC_ERRORS
-+#define _INC_EC_ERRORS
-+
-+/*
-+  31    - CRITICAL
-+  30-28 - CLASS         (ie. DIAG, KERNEL, FLASH, etc)
-+  27-24 - INSTANCE      (ie. 1, 2, 3, etc )
-+  23-16 - DEVICE        (ie. EMAC, IIC, etc)
-+  15-08 - FUNCTION      (ie. RX, TX, INIT, etc)
-+  07-00 - ERROR CODE    (ie. NO_BASE, FILE_NOT_FOUND, etc )
-+*/
-+
-+/*---------------------------------------------------------------------------
-+  Useful defines for accessing fields within error code
-+---------------------------------------------------------------------------*/
-+#define CRITICAL_SHIFT    31
-+#define CLASS_SHIFT       28
-+#define INST_SHIFT        24
-+#define DEVICE_SHIFT      16
-+#define FUNCTION_SHIFT     8
-+#define ERROR_CODE_SHIFT   0
-+
-+#define CRITICAL_MASK     1
-+#define CLASS_MASK        0x07
-+#define DEVICE_MASK       0xFF
-+#define INST_MASK         0x0F
-+#define FUNCTION_MASK     0xFF
-+#define ERROR_CODE_MASK   0xFF
-+
-+#define EC_CLASS(val)     ((val&CLASS_MASK)      << CLASS_SHIFT)
-+#define EC_DEVICE(val)    ((val&DEVICE_MASK)     << DEVICE_SHIFT)
-+#define EC_INST(val)      ((val&INST_MASK)       << INST_SHIFT)
-+#define EC_FUNC(val)      ((val&FUNCTION_MASK)   << FUNCTION_SHIFT)
-+#define EC_ERR(val)       ((val&ERROR_CODE_MASK) << ERROR_CODE_SHIFT)
-+
-+/*---------------------------------------------------------------------------
-+   Operation classes
-+---------------------------------------------------------------------------*/
-+#define EC_HAL              EC_CLASS(0)
-+#define EC_DIAG             EC_CLASS(8)
-+
-+/*---------------------------------------------------------------------------
-+   Device types
-+---------------------------------------------------------------------------*/
-+#define EC_DEV_EMAC         EC_DEVICE(1)
-+#define EC_DEV_IIC          EC_DEVICE(2)
-+#define EC_DEV_RESET        EC_DEVICE(3)
-+#define EC_DEV_ATMSAR       EC_DEVICE(4)
-+#define EC_DEV_MEM          EC_DEVICE(5)
-+#define EC_DEV_DES          EC_DEVICE(6)
-+#define EC_DEV_DMA          EC_DEVICE(7)
-+#define EC_DEV_DSP          EC_DEVICE(8)
-+#define EC_DEV_TMR          EC_DEVICE(9)
-+#define EC_DEV_WDT          EC_DEVICE(10)
-+#define EC_DEV_DCL          EC_DEVICE(11)
-+#define EC_DEV_BBIF         EC_DEVICE(12)
-+#define EC_DEV_PCI              EC_DEVICE(13)
-+#define EC_DEV_XBUS         EC_DEVICE(14)
-+#define EC_DEV_DSLIF            EC_DEVICE(15)
-+#define EC_DEV_USB                      EC_DEVICE(16)
-+#define EC_DEV_CLKC                     EC_DEVICE(17)
-+#define EC_DEV_RAPTOR       EC_DEVICE(18)
-+#define EC_DEV_DSPC                     EC_DEVICE(19)
-+#define EC_DEV_INTC                     EC_DEVICE(20)
-+#define EC_DEV_GPIO                     EC_DEVICE(21)
-+#define EC_DEV_BIST                     EC_DEVICE(22)
-+#define EC_DEV_HDLC                     EC_DEVICE(23)
-+#define EC_DEV_UART                     EC_DEVICE(24)
-+#define EC_DEV_VOIC                     EC_DEVICE(25)
-+/* 9.17.02 (new HAL modules) */
-+#define EC_DEV_CPSAR        EC_DEVICE(0x1A)
-+#define EC_DEV_AAL5         EC_DEVICE(0x1B)
-+#define EC_DEV_AAL2         EC_DEVICE(0x1C)
-+#define EC_DEV_CPMAC        EC_DEVICE(0x1D)
-+#define EC_DEV_VDMA         EC_DEVICE(0x1E)
-+#define EC_DEV_VLYNQ        EC_DEVICE(0x1F)
-+#define EC_DEV_CPPI         EC_DEVICE(0x20)
-+#define EC_DEV_CPMDIO       EC_DEVICE(0x21)
-+
-+/*---------------------------------------------------------------------------
-+   Function types
-+---------------------------------------------------------------------------*/
-+#define EC_FUNC_READ_CONF   EC_FUNC(1)
-+#define EC_FUNC_INIT        EC_FUNC(2)
-+
-+/*---------------------------------------------------------------------------
-+   Error codes
-+---------------------------------------------------------------------------*/
-+#define EC_CRITICAL         (1<<CRITICAL_SHIFT)
-+#define EC_NO_ERRORS        0
-+#define EC_VAL_NO_BASE      EC_ERR(1)
-+#define EC_VAL_NO_RESET_BIT EC_ERR(2)
-+#define EC_VAL_NO_RESET     EC_ERR(3)
-+#define EC_VAL_BAD_BASE     EC_ERR(4)
-+#define EC_VAL_MALLOCFAILED EC_ERR(5)
-+#define EC_VAL_NO_RESETBASE EC_ERR(6)
-+#define EC_DEVICE_NOT_FOUND EC_ERR(7)
-+
-+/*---------------------------------------------------------------------------
-+   Function declarations
-+---------------------------------------------------------------------------*/
-+extern void ec_log_error( unsigned int );
-+
-+#endif /* _INC_EC_ERRORS */
-diff -urN linux.old/drivers/net/avalanche_cpmac/hcpmac.c linux.dev/drivers/net/avalanche_cpmac/hcpmac.c
---- linux.old/drivers/net/avalanche_cpmac/hcpmac.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/hcpmac.c	2005-07-12 02:48:42.174574000 +0200
-@@ -0,0 +1,1878 @@
-+/******************************************************************************
-+ *  TNETDxxxx Software Support
-+ *  Copyright (c) 2002-2004 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  FILE:
-+ *
-+ *  DESCRIPTION:
-+ *      This file contains the code for the HAL EMAC Bridge Test
-+ *
-+ *  HISTORY:
-+ *  xxXxx01 Denis            RC1.00  Original Version created.
-+ *  22Jan02 Denis/Mick       RC1.01  Modified for HAL EMAC API
-+ *  24Jan02 Denis/Mick       RC1.02  Speed Improvements
-+ *  28Jan02 Denis/Mick       RC1.16  Made function calls pointers
-+ *  28Jan02 Mick             RC1.18  Split into separate modules
-+ *  29Jan02 Mick             RC1.19  Hal include file cleaned up
-+ *  15Jul02 Michael Hanrahan RC1.20  Synch'd with Linux Version
-+ *  23Sep02 Michael Hanrahan RC1.21  Added CPPI.C
-+ *  16Oct02 Michael Hanrahan RC1.22  Added CAF etc to Options.Conf
-+ *  09Jan03 Michael Hanrahan RC3.01  Fixed incorrect MDIO check
-+ *  01Feb03 Michael Hanrahan RC3.02  Updated for GPIO/PBUSFREQ
-+ *  29Mar03 Michael Hanrahan 1.03 Corrected  ChannelConfigGet
-+ *  29Mar03 Michael Hanrahan 1.03 Removed user setting of TxNumQueues
-+ *  23Aug04 Michael Hanrahan 1.7.8 Support for Setting Mac Address
-+ *  @author Michael Hanrahan
-+ *  @version 1.02
-+ *  @date    24-Jan-2002
-+ *****************************************************************************/
-+#define _HAL_CPMAC
-+#define _CPHAL_CPMAC
-+#define _CPHAL
-+#define __CPHAL_CPMDIO
-+
-+#include "dox_cpmac.h"  /*  Documentation information */
-+
-+/*  OS Data Structure definitions  */
-+
-+typedef void OS_PRIVATE;
-+typedef void OS_DEVICE;
-+typedef void OS_SENDINFO;
-+typedef void OS_RECEIVEINFO;
-+typedef void OS_SETUP;
-+
-+/*  HAL Data Structure definitions  */
-+
-+typedef struct _phy_device PHY_DEVICE;
-+typedef struct hal_device  HAL_DEVICE;
-+typedef struct hal_private HAL_PRIVATE;
-+typedef struct hal_private HAL_RECEIVEINFO;
-+
-+#include "cpcommon_cpmac.h"
-+#include "cpswhal_cpmac.h"
-+#include "cpmdio.h"
-+#include "hcpmac.h"
-+#include "cpmac_reg.h"
-+
-+
-+#define EC_MODULE
-+
-+/* MDIO Clock Frequency Default Value */
-+
-+/* Rcb/Tcb Constants */
-+
-+#define CB_SOF_BIT         (1<<31)
-+#define CB_EOF_BIT         (1<<30)
-+#define CB_SOF_AND_EOF_BIT (CB_SOF_BIT|CB_EOF_BIT)
-+#define CB_OWNERSHIP_BIT   (1<<29)
-+#define CB_EOQ_BIT         (1<<28)
-+#define CB_SIZE_MASK       0x0000ffff
-+#define RCB_ERRORS_MASK    0x03fe0000
-+
-+static char *channel_names[]   = CHANNEL_NAMES; /* GSG 11/22 (may change this implementation) */
-+
-+#define scFound(Module) if (HalDev->State != enDevFound)    return (Module|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE)
-+#define scInit(Module)  if (HalDev->State <  enInitialized) return (Module|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE)
-+#define scOpen(Module)  if (HalDev->State <  enOpened)      return (Module|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE)
-+
-+
-+
-+/********************************************************************
-+**
-+**  L O C A L  F U N C T I O N S
-+**
-+********************************************************************/
-+static int halIsr(HAL_DEVICE *HalDev, int *MorePackets);
-+static int cpmacRandom(HAL_DEVICE *HalDev);
-+static int cpmacRandomRange(HAL_DEVICE *HalDev, int min, int max);
-+static int halPacketProcessEnd(HAL_DEVICE *HalDev);
-+
-+#include "cpcommon_cpmac.c"                                                /*~RC3.02*/
-+#include "cppi_cpmac.c"
-+#include "cpmdio.c"                                                  /*~RC3.02*/
-+
-+static int MacAddressSave(HAL_DEVICE *HalDev, unsigned char *MacAddr)
-+  {
-+  int i;
-+  int inst             = HalDev->inst;
-+
-+  HalDev->MacAddr = MacAddr;
-+
-+  if(HalDev->debug)
-+    {
-+    dbgPrintf("MacAddrSave[%d]: ", inst);
-+    for (i=0;i<6;i++)
-+       dbgPrintf("%X", HalDev->MacAddr[i]);
-+    dbgPrintf("\n");
-+    osfuncSioFlush();
-+    }
-+  return(EC_NO_ERRORS);
-+  }
-+static int MacAddressSet(HAL_DEVICE *HalDev)
-+  {
-+  unsigned char *macadr = &HalDev->MacAddr[0];
-+  int base             = HalDev->dev_base;
-+
-+  scOpen(EC_CPMAC);
-+  CPMAC_MACADDRLO_0(base) = macadr[5];
-+  CPMAC_MACADDRMID(base)  = macadr[4];
-+  CPMAC_MACADDRHI(base)   = (macadr[0])|(macadr[1]<<8)|(macadr[2]<<16)|(macadr[3]<<24);
-+  if(HalDev->debug)
-+    {
-+     dbgPrintf("MacAddrSet: MacAddr(%d) %X %X %X\n", HalDev->inst, CPMAC_MACADDRLO_0(base),
-+                                                     CPMAC_MACADDRMID(base),
-+                                                     CPMAC_MACADDRHI(base));
-+
-+     dbgPrintf("Start MAC: %d\n",HalDev->dev_base);
-+     osfuncSioFlush();
-+    }
-+  return(EC_NO_ERRORS);
-+  }
-+
-+
-+/*
-+  Updates the MacHash registers
-+*/
-+static void MacHashSet(HAL_DEVICE *HalDev)
-+  {
-+  if(HalDev->State <  enOpened)
-+    return;
-+
-+  CPMAC_MACHASH1(HalDev->dev_base) = HalDev->MacHash1;
-+  CPMAC_MACHASH2(HalDev->dev_base) = HalDev->MacHash2;
-+  if (DBG(11))
-+    dbgPrintf("CPMAC[%X]: MacHash1 0x%08X, MacHash2 0x%08X\n", HalDev->dev_base, CPMAC_MACHASH1(HalDev->dev_base), CPMAC_MACHASH2(HalDev->dev_base));
-+  }
-+
-+/*
-+  Reads the MacControl register and updates
-+  the changable bits. (See MACCONTROL_MASK)
-+*/
-+static void RxMBP_EnableSet(HAL_DEVICE *HalDev)
-+  {
-+   bit32u RxMbpEnable;
-+   if(HalDev->State <  enOpened)
-+     return;
-+   RxMbpEnable  = CPMAC_RX_MBP_ENABLE(HalDev->dev_base);
-+   RxMbpEnable &= ~RX_MBP_ENABLE_MASK; /* Clear out updatable bits */
-+   RxMbpEnable |= HalDev->RxMbpEnable;
-+   CPMAC_RX_MBP_ENABLE(HalDev->dev_base) = RxMbpEnable;
-+  }
-+/*
-+  Reads the MacControl register and updates
-+  the changable bits. (See MACCONTROL_MASK)
-+*/
-+static void MacControlSet(HAL_DEVICE *HalDev)
-+  {
-+   bit32u MacControl;
-+   if(HalDev->State <  enOpened)
-+     return;
-+   MacControl  = CPMAC_MACCONTROL(HalDev->dev_base);
-+   MacControl &= ~MACCONTROL_MASK; /* Clear out updatable bits */
-+   MacControl |= HalDev->MacControl;
-+   if(!(MacControl & MII_EN)) /* If Enable is not set just update register  */
-+      CPMAC_MACCONTROL(HalDev->dev_base) = MacControl;
-+   else
-+     {
-+     if(MacControl & CTRL_LOOPBACK)    /*  Loopback Set  */
-+       {
-+       /* mii_en is set and loopback is needed,
-+          clear mii_en, set loopback, then set mii_en
-+       */
-+       MacControl &= ~MII_EN;  /* Clear MII_EN  */
-+       CPMAC_MACCONTROL(HalDev->dev_base) = MacControl;
-+       CPMAC_MACCONTROL(HalDev->dev_base) |= MII_EN; /* Set MII_EN  */
-+       HalDev->Linked = 1; /* if in loopback the logically linked */
-+       }
-+     else  /* If Loopback not set just update */
-+       {
-+       CPMAC_MACCONTROL(HalDev->dev_base) = MacControl;
-+       }
-+     }
-+    if(DBG(0))
-+      dbgPrintf("[halMacControlSet]MacControl:%08X\n", CPMAC_MACCONTROL(HalDev->dev_base));
-+  }
-+static int UnicastSet(HAL_DEVICE *HalDev)
-+  {
-+  CPMAC_RX_UNICAST_SET(HalDev->dev_base)    = HalDev->RxUnicastSet;
-+  CPMAC_RX_UNICAST_CLEAR(HalDev->dev_base)  = HalDev->RxUnicastClear;
-+  return(EC_NO_ERRORS);
-+  }
-+
-+  
-+static bit32u HashGet(bit8u *Address)
-+  {
-+  bit32u hash;
-+    bit8u  tmpval;
-+    int    i;
-+
-+    hash = 0;
-+    for( i=0; i<2; i++ )
-+    {
-+        tmpval = *Address++;
-+        hash  ^= (tmpval>>2)^(tmpval<<4);
-+        tmpval = *Address++;
-+        hash  ^= (tmpval>>4)^(tmpval<<2);
-+        tmpval = *Address++;
-+        hash  ^= (tmpval>>6)^(tmpval);
-+    }
-+
-+    return( hash & 0x3F );
-+  }
-+
-+static void HashAdd(HAL_DEVICE *HalDev, bit8u *MacAddress)
-+{
-+  bit32u HashValue;
-+  bit32u HashBit;
-+
-+  HashValue = HashGet(MacAddress);
-+
-+  if(HashValue < 32)
-+    {
-+    HashBit = (1 << HashValue);
-+    HalDev->MacHash1 |= HashBit;
-+    }
-+    else
-+    {
-+    HashBit = (1 << (HashValue-32));
-+    HalDev->MacHash2 |= HashBit;
-+    }
-+}
-+
-+static void HashDel(HAL_DEVICE *HalDev, bit8u *MacAddress)
-+{
-+  bit32u HashValue;
-+  bit32u HashBit;
-+
-+  HashValue = HashGet(MacAddress);
-+
-+  if(HashValue < 32)
-+    {
-+    HashBit = (1 << HashValue);
-+    HalDev->MacHash1 &= ~HashBit;
-+    }
-+    else
-+    {
-+    HashBit = (1 << (HashValue-32));
-+    HalDev->MacHash2 &= ~HashBit;
-+    }
-+}
-+
-+/*  Replace with an array based on key, with a ptr to the code to do */
-+/* e.g.  [enRX_PASS_CRC] = {Set, MBP_UPDATE() } */
-+static void DuplexUpdate(HAL_DEVICE *HalDev)
-+{
-+  int base           = HalDev->dev_base;
-+  PHY_DEVICE *PhyDev = HalDev->PhyDev;
-+
-+  if(HalDev->State <  enOpened)
-+    return;
-+
-+   /* No Phy Condition */
-+   if(HalDev->MdioConnect & _CPMDIO_NOPHY)                        /*MJH+030805*/
-+   {
-+       /*  No Phy condition, always linked */
-+       HalDev->Linked     = 1;
-+       HalDev->EmacSpeed  = 1;
-+       HalDev->EmacDuplex = 1;
-+       HalDev->PhyNum     = 0xFFFFFFFF;  /* No Phy Num */
-+       CPMAC_MACCONTROL(base) |= FULLDUPLEX;                      /*MJH+030909*/
-+       osfuncStateChange();
-+       return;
-+   }
-+
-+  if(HalDev->MacControl & CTRL_LOOPBACK)    /*  Loopback Set  */
-+    {
-+    HalDev->Linked = 1;
-+    return;
-+    }
-+
-+  if (HalDev->MdioConnect & _CPMDIO_LOOPBK)
-+    {
-+    HalDev->Linked = cpMacMdioGetLoopback(HalDev->PhyDev);
-+    }
-+  else
-+    {
-+    HalDev->Linked = cpMacMdioGetLinked(HalDev->PhyDev);
-+    }
-+  if (HalDev->Linked)
-+    {
-+     /*  Retreive Duplex and Speed and the Phy Number  */
-+     if(HalDev->MdioConnect & _CPMDIO_LOOPBK)
-+       HalDev->EmacDuplex = 1;
-+     else
-+       HalDev->EmacDuplex = cpMacMdioGetDuplex(PhyDev);
-+     HalDev->EmacSpeed  = cpMacMdioGetSpeed(PhyDev);
-+     HalDev->PhyNum     = cpMacMdioGetPhyNum(PhyDev);
-+
-+     if(HalDev->EmacDuplex)
-+       CPMAC_MACCONTROL(base) |= FULLDUPLEX;
-+     else
-+       CPMAC_MACCONTROL(base) &= ~FULLDUPLEX;
-+     if(HalDev->debug)
-+        dbgPrintf("%d: Phy= %d, Speed=%s, Duplex=%s\n",HalDev->inst,HalDev->PhyNum,(HalDev->EmacSpeed)?"100":"10",(HalDev->EmacDuplex)?"Full":"Half");
-+    }
-+  if(HalDev->debug)
-+     dbgPrintf("DuplexUpdate[%d]: MACCONTROL 0x%08X, %s\n", HalDev->inst, CPMAC_MACCONTROL(base),(HalDev->Linked)?"Linked":"Not Linked");
-+}
-+static void MdioSetPhyMode(HAL_DEVICE *HalDev)
-+  {
-+  unsigned int PhyMode;
-+  /* Verify proper device state */
-+  if (HalDev->State < enOpened)
-+    return;
-+
-+  PhyMode = NWAY_AUTO|NWAY_FD100|NWAY_HD100|NWAY_FD10|NWAY_HD10;
-+  if(DBG(0))
-+    {
-+    dbgPrintf("halSetPhyMode1: MdioConnect:%08X ,", HalDev->MdioConnect);
-+    dbgPrintf("PhyMode:%08X Auto:%d, FD10:%d, HD10:%d, FD100:%d, HD100:%d\n", PhyMode,
-+           PhyMode&NWAY_AUTO, PhyMode&NWAY_FD10, PhyMode&NWAY_HD10, PhyMode&NWAY_FD100,
-+           PhyMode&NWAY_HD100);
-+    }
-+
-+
-+  if (  HalDev->MdioConnect & _CPMDIO_NEG_OFF)  /* ~RC3.01                */
-+    PhyMode &= ~(NWAY_AUTO);                    /* Disable Auto Neg       */
-+  if (!(HalDev->MdioConnect & _CPMDIO_HD))
-+    PhyMode &= ~(NWAY_HD100|NWAY_HD10);         /* Cannot support HD      */
-+  if (!(HalDev->MdioConnect & _CPMDIO_FD))
-+    PhyMode &= ~(NWAY_FD100|NWAY_FD10);         /* Cannot support FD      */
-+  if (!(HalDev->MdioConnect & _CPMDIO_10))
-+    PhyMode &= ~(NWAY_HD10|NWAY_FD10);          /* Cannot support 10 Mbs  */
-+  if (!(HalDev->MdioConnect & _CPMDIO_100))
-+    PhyMode &= ~(NWAY_HD100|NWAY_FD100);        /* Cannot support 100 Mbs */
-+
-+  if(HalDev->MdioConnect & _CPMDIO_AUTOMDIX)   PhyMode |= NWAY_AUTOMDIX; /* Set AutoMdix */
-+
-+  if (HalDev->CpmacFrequency <= 50000000)
-+    PhyMode &= ~(NWAY_FD100|NWAY_HD100); /* Cannot support 100 MBS */
-+  if(DBG(7))
-+    dbgPrintf("halNeg: PhyMode[0x%08X] %d\n", HalDev->dev_base, PhyMode);
-+
-+  if(DBG(0))
-+    {
-+    dbgPrintf("halSetPhyMode2: MdioConnect:%08X ,", HalDev->MdioConnect);
-+    dbgPrintf("PhyMode:%08X Auto:%d, FD10:%d, HD10:%d, FD100:%d, HD100:%d\n", PhyMode,
-+               PhyMode&NWAY_AUTO, PhyMode&NWAY_FD10, PhyMode&NWAY_HD10, PhyMode&NWAY_FD100,
-+               PhyMode&NWAY_HD100);
-+    }
-+
-+
-+  cpMacMdioSetPhyMode(HalDev->PhyDev,PhyMode);
-+  DuplexUpdate(HalDev);
-+  }
-+static int StatsClear(HAL_DEVICE *HalDev)
-+{
-+  int i;
-+  MEM_PTR pStats;
-+
-+  scOpen(EC_CPMAC);
-+
-+  pStats = pCPMAC_RXGOODFRAMES(HalDev->dev_base);
-+  for (i=0;i<STATS_MAX;i++)
-+    {
-+    *(MEM_PTR)(pStats) =  0xFFFFFFFF;
-+    pStats++;
-+    }
-+
-+  return(EC_NO_ERRORS);
-+}
-+static void StatsDump(HAL_DEVICE *HalDev, void *Value)
-+ {
-+ MEM_PTR ptrStats;
-+ MEM_PTR ptrValue;
-+ int i;
-+ ptrStats = pCPMAC_RXGOODFRAMES(HalDev->dev_base);
-+ ptrValue = (bit32u*) Value;
-+ for (i=0; i<STATS_MAX; i++)
-+  {
-+     *ptrValue = *ptrStats;
-+     if(DBG(4))
-+      {
-+      dbgPrintf("halStatsDump: Stat[%d:0x%08X] %d 0x%08X %d\n", i, ptrStats, *ptrStats, ptrValue, *ptrValue);
-+      osfuncSioFlush();
-+      }
-+     ptrStats++;
-+     ptrValue++;
-+  }
-+ }
-+static void ConfigApply(HAL_DEVICE *HalDev)
-+  {
-+  CPMAC_RX_MAXLEN(HalDev->dev_base)          = HalDev->RxMaxLen;
-+  CPMAC_RX_FILTERLOWTHRESH(HalDev->dev_base) = HalDev->RxFilterLowThresh;
-+  CPMAC_RX0_FLOWTHRESH(HalDev->dev_base)     = HalDev->Rx0FlowThresh;
-+  UnicastSet(HalDev);
-+  MacAddressSet(HalDev);
-+  RxMBP_EnableSet(HalDev);
-+  MacHashSet(HalDev);
-+  MacControlSet(HalDev);
-+  if(DBG(0))
-+     dbgPrintf("ValuesUpdate[%d]: MBP_ENABLE 0x%08X\n", HalDev->inst, CPMAC_RX_MBP_ENABLE(HalDev->dev_base));
-+  }
-+static int halStatus(HAL_DEVICE *HalDev)
-+{
-+   int status;
-+
-+    if(HalDev->State <  enOpened)
-+      return (EC_CPMAC|EC_FUNC_STATUS|EC_VAL_INVALID_STATE);      /*MJH+030805*/
-+
-+   /* No Phy Condition */
-+   if(HalDev->MdioConnect & _CPMDIO_NOPHY)                        /*MJH+030805*/
-+   {
-+       /*  No Phy condition, always linked */
-+       status = HalDev->Linked;
-+       status |= CPMAC_STATUS_LINK_DUPLEX;
-+       status |= CPMAC_STATUS_LINK_SPEED;
-+       return(status);
-+   }
-+
-+
-+   if (HalDev->HostErr)  /* Adapter Check  */
-+    {
-+    bit32u tmp;
-+    status = CPMAC_STATUS_ADAPTER_CHECK;
-+    if(HalDev->MacStatus & RX_HOST_ERR_CODE)
-+      {
-+      status |= CPMAC_STATUS_HOST_ERR_DIRECTION;
-+      tmp     = (HalDev->MacStatus & RX_HOST_ERR_CODE) >> 12; /* Code */
-+      status |= (tmp << 9); /* Code */
-+      tmp     = (HalDev->MacStatus & RX_ERR_CH) >> 8; /* Channel */
-+      status |= (tmp << 13);
-+      }
-+    else
-+    if(HalDev->MacStatus & TX_HOST_ERR_CODE)
-+      {
-+      status |= CPMAC_STATUS_HOST_ERR_DIRECTION;
-+      tmp     = (HalDev->MacStatus & TX_HOST_ERR_CODE) >> 20; /* Code */
-+      status |= (tmp << 9); /* Code */
-+      tmp     = (HalDev->MacStatus & TX_ERR_CH) >> 16; /* Channel */
-+      status |= (tmp << 13);
-+      }
-+    }
-+   else
-+    {
-+    status = HalDev->Linked;
-+    if(status)
-+      {
-+      status = CPMAC_STATUS_LINK;
-+      if(cpMacMdioGetDuplex(HalDev->PhyDev))
-+        status |= CPMAC_STATUS_LINK_DUPLEX;
-+      if(cpMacMdioGetSpeed(HalDev->PhyDev))
-+        status |= CPMAC_STATUS_LINK_SPEED;
-+      }
-+    }
-+   if(HalDev->debug)
-+      dbgPrintf("[halStatus] Link Status is %d for 0x%X\n", status, HalDev->dev_base);
-+   return(status);
-+}
-+static int InfoAccess(HAL_DEVICE *HalDev, int Key, int Action, void *ParmValue)
-+  {
-+  int rc = 0;
-+  int Update=0;
-+
-+  switch (Key)
-+  {
-+    /********************************************************************/
-+    /*                                                                  */
-+    /*                      GENERAL                                     */
-+    /*                                                                  */
-+    /********************************************************************/
-+
-+    case enVersion :
-+         if(Action==enGET)
-+           {
-+           *(const char **)ParmValue = pszVersion_CPMAC;
-+           }
-+    break;
-+    case enDebug  :
-+         if(Action==enSET)
-+           {
-+           HalDev->debug = *(unsigned int *)ParmValue;
-+           }
-+    break;
-+
-+    case enStatus      :
-+         if(Action==enGET)
-+           {
-+           int status;
-+           status = halStatus(HalDev);
-+           *(int *)ParmValue = status;
-+           }
-+    break;
-+    /********************************************************************/
-+    /*                                                                  */
-+    /*                      RX_MBP_ENABLE                               */
-+    /*                                                                  */
-+    /********************************************************************/
-+
-+    case enRX_PASS_CRC  :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_PASS_CRC(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_QOS_EN  :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_QOS_EN(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_NO_CHAIN :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_NO_CHAIN(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_CMF_EN :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_CMF_EN(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_CSF_EN :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_CSF_EN(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_CEF_EN :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_CEF_EN(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_CAF_EN :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_CAF_EN(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_PROM_CH :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_PROM_CH(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_BROAD_EN :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_BROAD_EN(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_BROAD_CH :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_BROAD_CH(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_MULT_EN :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_MULT_EN(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_MULT_CH :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_MULT_CH(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+
-+    /********************************************************************/
-+    /*                                                                  */
-+    /*                      MAC_CONTROL                                 */
-+    /*                                                                  */
-+    /********************************************************************/
-+
-+    case enTX_PTYPE :
-+         if(Action==enSET)
-+           {
-+           UPDATE_TX_PTYPE(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enTX_PACE :
-+         if(Action==enSET)
-+           {
-+           UPDATE_TX_PACE(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enTX_FLOW_EN :
-+         if(Action==enSET)
-+           {
-+           UPDATE_TX_FLOW_EN(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_FLOW_EN :
-+         if(Action==enSET)
-+           {
-+           UPDATE_RX_FLOW_EN(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+
-+    case enCTRL_LOOPBACK :
-+         if(Action==enSET)
-+           {
-+           UPDATE_CTRL_LOOPBACK(*(unsigned int *)ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    /********************************************************************/
-+    /*                                                                  */
-+    /*                      RX_UNICAST_SET                              */
-+    /*                                                                  */
-+    /********************************************************************/
-+
-+    case enRX_UNICAST_SET :
-+         if(Action==enSET)
-+          {
-+           HalDev->RxUnicastSet   |=  (1 << *(unsigned int *)ParmValue);
-+           HalDev->RxUnicastClear &= ~(1 << *(unsigned int *)ParmValue);
-+           Update=1;
-+          }
-+    break;
-+    case enRX_UNICAST_CLEAR :
-+         if(Action==enSET)
-+          {
-+          HalDev->RxUnicastClear |=  (1 << *(unsigned int *)ParmValue);
-+          HalDev->RxUnicastSet   &= ~(1 << *(unsigned int *)ParmValue);
-+          Update=1;
-+          }
-+    break;
-+
-+    case enRX_MAXLEN :
-+         if(Action==enSET)
-+           {
-+           HalDev->RxMaxLen    =   *(unsigned int *)ParmValue;
-+           Update=1;
-+           }
-+    break;
-+
-+    case enRX_FILTERLOWTHRESH :
-+         if(Action==enSET)
-+           {
-+           HalDev->RxFilterLowThresh  =   *(unsigned int *)ParmValue;
-+           Update=1;
-+           }
-+    break;
-+    case enRX0_FLOWTHRESH :
-+         if(Action==enSET)
-+           {
-+           HalDev->Rx0FlowThresh =   *(unsigned int *)ParmValue;
-+           Update=1;
-+           }
-+    break;
-+    /********************************************************************/
-+    /*                                                                  */
-+    /*                      RX_MULTICAST                                */
-+    /*                                                                  */
-+    /********************************************************************/
-+
-+    case enRX_MULTICAST :
-+    break;
-+    case enRX_MULTI_SINGLE :
-+         if(DBG(11))
-+          {
-+           int tmpi;
-+           bit8u *MacAddress;
-+           MacAddress = (bit8u *) ParmValue;
-+           dbgPrintf("CPMAC[%X]:  MacAddress '", HalDev->dev_base);
-+           for (tmpi=0; tmpi<6; tmpi++)
-+             dbgPrintf("%02X:", MacAddress[tmpi]);
-+             dbgPrintf("\n");
-+          }
-+         if(Action==enCLEAR)
-+           {
-+           HashDel(HalDev, ParmValue);
-+           Update=1;
-+           }
-+         else
-+         if(Action==enSET)
-+           {
-+           HashAdd(HalDev, ParmValue);
-+           Update=1;
-+           }
-+    break;
-+    case enRX_MULTI_ALL :
-+         if(Action==enCLEAR)
-+           {
-+           HalDev->MacHash1 = 0;
-+           HalDev->MacHash2 = 0;
-+           Update=1;
-+           }
-+         else
-+         if(Action==enSET)
-+           {
-+           HalDev->MacHash1 = 0xFFFFFFFF;
-+           HalDev->MacHash2 = 0xFFFFFFFF;
-+           Update=1;
-+           }
-+    break;
-+
-+    /********************************************************************/
-+    /*                                                                  */
-+    /*                      MDIO                                        */
-+    /*                                                                  */
-+    /********************************************************************/
-+
-+    case enMdioConnect :
-+         if(Action==enSET)
-+           {
-+           HalDev->MdioConnect = *(unsigned int *)ParmValue;
-+           MdioSetPhyMode(HalDev);
-+           }
-+           if(Action==enGET)
-+           {
-+           *(unsigned int *)ParmValue = HalDev->MdioConnect;
-+           }
-+    break;
-+
-+
-+    /********************************************************************/
-+    /*                                                                  */
-+    /*                      STATISTICS                                  */
-+    /*                                                                  */
-+    /********************************************************************/
-+    case enStatsClear :
-+           StatsClear(HalDev);
-+    break;
-+    case enStatsDump :
-+         if(Action==enGET)
-+           {
-+           StatsDump(HalDev, ParmValue);
-+           }
-+    break;
-+
-+/*  Not implemented
-+    case enStats1 :
-+         if(Action==enGET)
-+           {
-+           StatsGet(HalDev, ParmValue, 1);
-+           }
-+    break;
-+
-+    case enStats2 :
-+         if(Action==enGET)
-+           {
-+           StatsGet(HalDev, ParmValue, 2);
-+           }
-+    break;
-+    case enStats3 :
-+         if(Action==enGET)
-+           {
-+           StatsGet(HalDev, ParmValue, 3);
-+           }
-+    break;
-+    case enStats4 :
-+         if(Action==enGET)
-+           {
-+           StatsGet(HalDev, ParmValue, 4);
-+           }
-+    break;
-+
-+*/
-+
-+    default:
-+    rc = EC_CPMAC|EC_FUNC_OPTIONS|EC_VAL_KEY_NOT_FOUND;
-+    break;
-+  }
-+
-+  /* Verify proper device state */
-+  if (HalDev->State == enOpened)
-+    switch (Update)
-+      {
-+      case 1 :
-+           ConfigApply(HalDev);
-+      break;
-+      default:
-+      break;
-+      }
-+
-+  return (rc);
-+  }
-+static const char pszStats[]       = "Stats;";
-+
-+static int halControl(HAL_DEVICE *HalDev, const char *pszKey, const char *pszAction, void *Value)
-+  {
-+  int i;
-+  int rc=0;
-+  int Action;
-+  int ActionFound;
-+  int KeyFound;
-+
-+#ifdef __CPHAL_DEBUG
-+  if (DBG(1))
-+    {
-+    dbgPrintf("\nhalControl-HalDev:%08X,Action:%s,Key:%s\n", (bit32u)HalDev, pszAction, pszKey);
-+    }
-+#endif
-+
-+  /* 23Aug04 - BCIL needs to set Mac Address  */
-+  if(HalDev->OsFunc->Strcmpi(pszKey, pszMacAddr) == 0)
-+    {
-+    KeyFound=1;
-+    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
-+      {
-+        unsigned char *MacAddr;  
-+        MacAddr = (unsigned char *) Value;  
-+        MacAddressSave(HalDev, MacAddr); 
-+        MacAddressSet(HalDev);       
-+        return(0);
-+      }
-+    else
-+      {
-+       return(-1);
-+      }
-+    }
-+     
-+  if(HalDev->OsFunc->Strcmpi(pszKey, hcLinked) == 0)
-+    {
-+    KeyFound=1;
-+    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
-+      {
-+        HalDev->Linked = *(int *)Value;
-+        return(0);
-+      }
-+    else
-+      {
-+       return(-1);
-+      }
-+    }
-+  
-+  if(HalDev->OsFunc->Strcmpi(pszKey, "TxIntDisable") == 0)
-+    {
-+    KeyFound=1;
-+    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
-+      {
-+        HalDev->TxIntDisable = *(int *)Value;
-+        if(HalDev->TxIntDisable && (HalDev->State == enOpened))
-+          {
-+              /* if Opened and need TxIntDisabled, clear Ints for Channel 0 */
-+              CPMAC_TX_INTMASK_CLEAR(HalDev->dev_base) = 1;             
-+          }        
-+        return(0);
-+      }
-+    else
-+      {
-+       return(-1);
-+      }
-+    }
-+
-+  if(HalDev->OsFunc->Strcmpi(pszKey, hcPhyAccess) == 0)
-+    {
-+    bit32u RegAddr;
-+    bit32u PhyNum;
-+    bit32u Data;
-+    bit32u ValueIn;
-+
-+    ValueIn = *(bit32u*) Value;
-+
-+    KeyFound=1;
-+    /* Cannot access MII if not opended */
-+
-+    if(HalDev->State < enOpened)
-+      return(-1);
-+
-+    if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
-+      {
-+
-+      PhyNum  = (ValueIn & 0x1F);        /* Phynum 0-32 */
-+      RegAddr = (ValueIn >> 5) & 0xFF;   /* RegAddr in upper 11 bits */
-+
-+      *(bit32u*)Value = _mdioUserAccessRead(HalDev->PhyDev, RegAddr, PhyNum);
-+
-+      return(0);
-+      } /* end of hcGet */
-+
-+
-+    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
-+      {
-+      PhyNum  = (ValueIn & 0x1F);        /* Phynum 0-32 */
-+      RegAddr = (ValueIn >> 5) & 0xFF;   /* RegAddr in upper 11 bits of lower 16 */
-+
-+      Data    = ValueIn >> 16;           /* Data store in upper 16 bits */
-+
-+      _mdioUserAccessWrite(HalDev->PhyDev, RegAddr, PhyNum, Data);
-+      return(0);
-+      }
-+    } /*  End of hcPhyAccess */
-+
-+  if(HalDev->OsFunc->Strcmpi(pszKey, hcPhyNum) == 0)
-+    {
-+    KeyFound=1;
-+    if(!HalDev->Linked)
-+      return(-1);  /* if not linked the no Phy Connected */
-+    if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
-+      {
-+        *(int *)Value = HalDev->PhyNum;
-+      return(0);
-+      }
-+    }
-+
-+  if(HalDev->OsFunc->Strcmpi(pszKey, hcCpmacSize) == 0)
-+    {
-+    KeyFound=1;
-+    if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
-+      {
-+        *(bit32u *)Value = HalDev->CpmacSize;
-+      return(0);
-+      }
-+    }
-+
-+   if(HalDev->OsFunc->Strcmpi(pszKey, hcCpmacBase) == 0)
-+    {
-+    KeyFound=1;
-+    if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
-+      {
-+        *(int *)Value = HalDev->dev_base;
-+      return(0);
-+      }
-+    }
-+
-+  if(HalDev->OsFunc->Strcmpi(pszKey, hcFullDuplex) == 0)
-+    {
-+    KeyFound=1;
-+    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
-+      {
-+        UPDATE_FULLDUPLEX(*(unsigned int *)Value);
-+        if(HalDev->State == enOpened)
-+           ConfigApply(HalDev);
-+      return(0);
-+      }
-+    else
-+      return(-1);
-+    }
-+
-+  if(HalDev->OsFunc->Strcmpi(pszKey, pszDebug) == 0)
-+    {
-+    KeyFound=1;
-+    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
-+      {
-+        ActionFound=1;
-+        HalDev->debug = *(int *)Value;
-+      }
-+    }
-+
-+  if(HalDev->OsFunc->Strcmpi(pszKey, hcMaxFrags) == 0)
-+    {
-+     KeyFound=1;
-+     if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
-+       {
-+        ActionFound=1;
-+
-+        if ((*(int *)Value) > 0)
-+          HalDev->MaxFrags = *(int *)Value;
-+         else
-+          rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_INVALID_VALUE);
-+      }
-+
-+     if (HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
-+       {
-+        ActionFound=1;
-+
-+        *(int *)Value = HalDev->MaxFrags;
-+       }
-+    }
-+
-+  if(HalDev->OsFunc->Strstr(pszKey, pszStats) != 0)
-+    {
-+     KeyFound=1;
-+     if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
-+         {
-+       int Level;
-+       int Ch;
-+       char *TmpKey = (char *)pszKey;
-+       ActionFound=1;
-+       TmpKey += HalDev->OsFunc->Strlen(pszStats);
-+       Level   = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+       TmpKey++;
-+       Ch      = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+       TmpKey++;
-+       osfuncSioFlush();
-+#ifdef __CPHAL_DEBUG
-+  if (DBG(1))
-+    {
-+    dbgPrintf("\nhalControl-HalDev:%08X, Level:%d, Ch:%d\n", (bit32u)HalDev, Level, Ch);
-+    }
-+#endif
-+         StatsGet(HalDev, (void **)Value, Level, Ch, 0);
-+       osfuncSioFlush();
-+         }
-+    }
-+
-+
-+  if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
-+    Action = enSET;
-+  else
-+  if(HalDev->OsFunc->Strcmpi(pszAction, hcClear) == 0)
-+    Action = enCLEAR;
-+  else
-+  if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
-+    Action = enGET;
-+  else
-+    Action = enNULL;
-+
-+
-+
-+  for(i=enCommonStart+1;i<enCommonEnd;i++)
-+    {
-+    if(HalDev->OsFunc->Strcmpi(KeyCommon[i].strKey, pszKey)==0)
-+      {
-+      rc = InfoAccess(HalDev, KeyCommon[i].enKey, Action, Value);
-+      }
-+    }
-+  for(i=enCpmacStart+1;i<enCpmacEnd;i++)
-+    {
-+    if(HalDev->OsFunc->Strcmpi(KeyCpmac[i].strKey, pszKey)==0)
-+      {
-+      rc = InfoAccess(HalDev, KeyCpmac[i].enKey, Action, Value);
-+      }
-+    }
-+/*
-+  if (KeyFound == 0)
-+    rc = (EC_MODULE|EC_FUNC_CONTROL|EC_VAL_KEY_NOT_FOUND);
-+
-+  if (ActionFound == 0)
-+    rc = (EC_MODULE|EC_FUNC_CONTROL|EC_VAL_ACTION_NOT_FOUND);
-+*/
-+
-+  return(rc);
-+  }
-+static bit32u ConfigGet(HAL_DEVICE *HalDev)
-+  {
-+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+  char *DeviceInfo     = HalDev->DeviceInfo;
-+  int i                = HalDev->inst;
-+  bit32u Value;
-+  int Error;
-+
-+  /* get the configuration parameters common to all modules */
-+  Error = ConfigGetCommon(HalDev);
-+  if (Error) return (EC_CPMAC|Error);
-+
-+  if (HalDev->debug)
-+    {
-+      dbgPrintf("ConfigGet: haldev:0x%08X inst:%d base:0x%08X reset:%d\n", (bit32u) &HalDev, HalDev->inst, HalDev->dev_base, HalDev->ResetBit);
-+      osfuncSioFlush();
-+    }
-+
-+  Error = OsFunc->DeviceFindParmUint(DeviceInfo, pszMdioConnect,&Value); /*MJH+030805*/
-+  if(!Error) HalDev->MdioConnect = Value;
-+
-+  Error = OsFunc->DeviceFindParmUint(DeviceInfo, "PhyMask",&Value);
-+  if(!Error) HalDev->PhyMask = Value;
-+
-+  Error = OsFunc->DeviceFindParmUint(DeviceInfo, "MLink",&Value);
-+  if(!Error) HalDev->MLinkMask = Value;
-+
-+  Error = OsFunc->DeviceFindParmUint(DeviceInfo, hcMdixMask, &Value);
-+  if(!Error)
-+    HalDev->MdixMask = Value;
-+  else
-+    HalDev->MdixMask = 0;
-+
-+  Error = OsFunc->DeviceFindParmUint(DeviceInfo, hcSize, &Value); /*MJH+030425*/
-+  if(!Error) HalDev->CpmacSize = Value;
-+
-+  for(i=enCommonStart+1;i<enCommonEnd;i++)
-+    {
-+    Error = OsFunc->DeviceFindParmUint(DeviceInfo, KeyCommon[i].strKey, (bit32u*)&Value);
-+    if(!Error)
-+      {
-+      InfoAccess(HalDev, KeyCommon[i].enKey, enSET, (bit32u*)&Value);
-+      }
-+    }
-+  for(i=enCpmacStart+1;i<enCpmacEnd;i++)
-+    {
-+    Error = OsFunc->DeviceFindParmUint(DeviceInfo, KeyCpmac[i].strKey, (bit32u*)&Value);
-+    if(!Error)
-+      {
-+      InfoAccess(HalDev, KeyCpmac[i].enKey, enSET, (bit32u*)&Value);
-+      }
-+    }
-+   return (EC_NO_ERRORS);
-+  }
-+
-+
-+static void ConfigInit(HAL_DEVICE *HalDev)
-+  {
-+  if(HalDev->inst == 0)
-+    {
-+     HalDev->dev_base  = 0xA8610000;
-+     HalDev->ResetBit  = 17;
-+     HalDev->interrupt = 19;
-+     HalDev->MLinkMask = 0;
-+     HalDev->PhyMask   = 0xAAAAAAAA;
-+    }
-+  else
-+    {
-+     HalDev->dev_base  = 0xA8612800;
-+     HalDev->ResetBit  = 21;
-+     HalDev->interrupt = 33;                                         /*~RC3.02*/
-+     HalDev->MLinkMask = 0;
-+     HalDev->PhyMask   = 0x55555555;
-+    }
-+  HalDev->RxMaxLen    = 1518;
-+  HalDev->MaxFrags    = 2;
-+  HalDev->MdioConnect = _CPMDIO_HD|_CPMDIO_FD|_CPMDIO_10|_CPMDIO_100|_CPMDIO_AUTOMDIX;
-+  HalDev->debug=0xFFFFFFFF;
-+  HalDev->debug=0;
-+  }
-+/* Shuts down the EMAC device
-+ *
-+ *@param HalDev EMAC instance. This was returned by halOpen()
-+ *@param mode Indicates actions to tak on close.
-+ <br>
-+ *PARTIAL - Disable EMAC
-+ <br>
-+ *FULL    - Disable EMAC and call OS to free all allocated memory
-+ *
-+ *@retval
-+ *        0 OK
-+ <br>
-+ *        Non-Zero Not OK
-+ *
-+ */
-+static int halInit( HAL_DEVICE *HalDev)
-+  {
-+   int rc;
-+
-+  /* Verify proper device state */
-+  if (HalDev->State != enDevFound)
-+    return(EC_CPMAC|EC_FUNC_HAL_INIT|EC_VAL_INVALID_STATE);
-+
-+  /* Configure HAL defaults */
-+  ConfigInit(HalDev);
-+
-+  /* Retrieve HAL configuration parameters from data store */
-+  rc = ConfigGet(HalDev);
-+  if (rc) return (rc);
-+
-+  /* Updated 030403*/
-+  rc = HalDev->OsFunc->Control(HalDev->OsDev, hcCpuFrequency, hcGet, &HalDev->CpuFrequency); /*MJH+030403*/
-+  if(rc)
-+    HalDev->CpuFrequency = 20000000;  /*20 Mhz default */         /*MJH+030403*/
-+
-+  rc = HalDev->OsFunc->Control(HalDev->OsDev, hcCpmacFrequency, hcGet, &HalDev->CpmacFrequency); /*MJH+030331*/
-+  if(rc)
-+    HalDev->CpmacFrequency = HalDev->CpuFrequency/2;               /*MJH~030404*/
-+
-+  rc = HalDev->OsFunc->Control(HalDev->OsDev, hcMdioBusFrequency,  hcGet, &HalDev->MdioBusFrequency);  /*MJH+030402*/
-+  if(rc)
-+    HalDev->MdioBusFrequency = HalDev->CpmacFrequency;
-+
-+  rc = HalDev->OsFunc->Control(HalDev->OsDev, hcMdioClockFrequency,  hcGet, &HalDev->MdioClockFrequency);  /*MJH+030402*/
-+  if(rc)
-+    HalDev->MdioClockFrequency = 2200000; /* 2.2 Mhz PITS #14 */
-+
-+
-+  /* update device state */
-+  HalDev->State = enInitialized;
-+
-+  /* initialize statistics */
-+  StatsInit(HalDev);                                                  /* +RC3.02 */
-+
-+  /*                                                                  -RC3.02
-+  StatsTable3[0].StatPtr  = &HalDev->ChData[0].RxBufSize;
-+  StatsTable3[1].StatPtr  = &HalDev->ChData[0].RxBufferOffset;
-+  StatsTable3[2].StatPtr  = &HalDev->ChData[0].RxNumBuffers;
-+  StatsTable3[3].StatPtr  = &HalDev->ChData[0].RxServiceMax;
-+  StatsTable3[4].StatPtr  = &HalDev->ChData[0].TxNumBuffers;
-+  StatsTable3[5].StatPtr  = &HalDev->ChData[0].TxNumQueues;
-+  StatsTable3[6].StatPtr  = &HalDev->ChData[0].TxServiceMax;
-+  */
-+
-+  return(EC_NO_ERRORS);
-+  }
-+static int halProbe(HAL_DEVICE *HalDev)
-+  {
-+  int inst             = HalDev->inst;
-+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+  int error_code;
-+
-+  if (HalDev->State != enConnected)
-+     return (EC_CPMAC|EC_FUNC_PROBE|EC_VAL_INVALID_STATE);
-+
-+  if(HalDev->debug) dbgPrintf("halProbe: %d ",inst);
-+
-+  error_code = OsFunc->DeviceFindInfo(inst,"cpmac",&HalDev->DeviceInfo);
-+
-+  if(error_code)
-+     return (EC_CPMAC|EC_FUNC_PROBE|EC_VAL_DEVICE_NOT_FOUND );
-+
-+  /* Set device state to DevFound */
-+  HalDev->State = enDevFound;
-+  return(EC_NO_ERRORS);
-+  }
-+static void ChannelConfigInit(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
-+  {
-+  int Ch        = HalChn->Channel;
-+  int Direction = HalChn->Direction;
-+  int nTxBuffers = 256;
-+
-+  if (Direction == DIRECTION_TX)
-+    {
-+    HalDev->ChData[Ch].TxNumBuffers   = nTxBuffers;
-+    HalDev->ChData[Ch].TxNumQueues    = 1;
-+    HalDev->ChData[Ch].TxServiceMax   = nTxBuffers/3;
-+    HalDev->TxIntThreshold[Ch]        = HalDev->ChData[Ch].TxServiceMax;
-+    HalDev->TxIntThresholdMaster[Ch]  = HalDev->TxIntThreshold[Ch];
-+    }
-+
-+  if (Direction == DIRECTION_RX)
-+    {
-+    HalDev->ChData[Ch].RxNumBuffers   = nTxBuffers*2;
-+    HalDev->ChData[Ch].RxBufferOffset = 0;
-+    HalDev->ChData[Ch].RxBufSize      = 1518;
-+    HalDev->ChData[Ch].RxServiceMax   = nTxBuffers/3; /*Not a typo*/
-+    }
-+  }
-+static int ChannelConfigApply(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
-+  {
-+   int Ch        = HalChn->Channel;
-+   int Direction = HalChn->Direction;
-+
-+   if (DBG(11))
-+     {
-+      dbgPrintf("halChannelConfigApply[%d:%d] haldev:0x%08X inst:%d base:0x%08X reset:%d\n", Ch, Direction, (bit32u) &HalDev, HalDev->inst, HalDev->dev_base, HalDev->ResetBit);
-+      osfuncSioFlush();
-+     }
-+
-+   if (Direction == DIRECTION_TX)
-+   {
-+     if (HalDev->ChIsOpen[Ch][Direction] == TRUE)
-+     {
-+      return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_TX_CH_ALREADY_OPEN);
-+     }
-+
-+     /* Initialize Queue Data */
-+     HalDev->TxActQueueHead[Ch][0]  = 0;
-+     HalDev->TxActQueueCount[Ch][0] = 0;
-+     HalDev->TxActive[Ch][0]        = FALSE;
-+
-+     /* Need to use a macro that takes channel as input */
-+     CPMAC_TX0_HDP(HalDev->dev_base)=0;
-+
-+     /* Initialize buffer memory for the channel */
-+     InitTcb(HalDev, Ch);
-+
-+     if(!HalDev->TxIntDisable)
-+       CPMAC_TX_INTMASK_SET(HalDev->dev_base) = (1<<Ch); /* GSG 11/22 */
-+   }
-+   else
-+   {
-+     if (HalDev->ChIsOpen[Ch][Direction] == TRUE)
-+     {
-+      return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_RX_CH_ALREADY_OPEN);
-+     }
-+
-+     /* Initialize Queue Data */
-+     HalDev->RxActQueueHead[Ch]     = 0;
-+     HalDev->RxActQueueCount[Ch]    = 0;
-+
-+     HalDev->RxActive[Ch]           = FALSE;
-+
-+     /* Need to use a macro that takes channel as input */
-+     CPMAC_RX0_HDP(HalDev->dev_base)=0;
-+
-+     /* Initialize buffer memory for the channel */
-+     InitRcb(HalDev, Ch);
-+
-+     CPMAC_RX_INTMASK_SET(HalDev->dev_base)  = (1<<Ch); /* GSG 11/22 */
-+   }
-+
-+   HalDev->ChIsOpen[Ch][Direction] = TRUE; /* channel is open */
-+
-+   return (EC_NO_ERRORS);
-+  }
-+
-+/* GSG 11/22
-+ * Retrieves channel parameters from configuration file.  Any parameters
-+ * which are not found are ignored, and the HAL default value will apply,
-+ * unless a new value is given through the channel structure in the call
-+ * to ChannelSetup.
-+ */
-+static int ChannelConfigGet(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
-+  {
-+  int Ch        = HalChn->Channel;
-+  int Direction = HalChn->Direction;
-+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+  unsigned int rc, Value;
-+  void *ChInfo;
-+
-+   rc=OsFunc->DeviceFindParmValue(HalDev->DeviceInfo, channel_names[Ch], &ChInfo);
-+   /*  Do not fail if Channel Info not available for RC2 */
-+   if (rc) return(0);
-+/*   if (rc) return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_CH_INFO_NOT_FOUND);*/
-+
-+   /* i don't care if a value is not found because they are optional */
-+   if(Direction == DIRECTION_TX)
-+     {
-+     rc=OsFunc->DeviceFindParmUint(ChInfo, "TxNumBuffers", &Value);
-+     if (!rc) HalDev->ChData[Ch].TxNumBuffers = Value;
-+
-+     /*rc=OsFunc->DeviceFindParmUint(ChInfo, "TxNumQueues", &Value);*/ /*MJH-030329*/
-+     /*if (!rc) HalDev->ChData[Ch].TxNumQueues = Value;*/              /*MJH-030329*/
-+
-+     rc=OsFunc->DeviceFindParmUint(ChInfo, "TxServiceMax", &Value);
-+     if (!rc) 
-+       {
-+         HalDev->ChData[Ch].TxServiceMax = Value;
-+         HalDev->TxIntThreshold[Ch]      = HalDev->ChData[Ch].TxServiceMax;
-+         HalDev->TxIntThresholdMaster[Ch]  = HalDev->TxIntThreshold[Ch];
-+       }
-+     }
-+   if(Direction == DIRECTION_RX)
-+     {
-+     rc=OsFunc->DeviceFindParmUint(ChInfo, "RxNumBuffers", &Value);
-+     if (!rc) HalDev->ChData[Ch].RxNumBuffers = Value;
-+
-+     rc=OsFunc->DeviceFindParmUint(ChInfo, "RxBufferOffset", &Value);
-+     if (!rc) HalDev->ChData[Ch].RxBufferOffset = Value;
-+
-+     rc=OsFunc->DeviceFindParmUint(ChInfo, "RxBufSize", &Value);
-+     if (!rc) HalDev->ChData[Ch].RxBufSize = Value;
-+
-+     rc=OsFunc->DeviceFindParmUint(ChInfo, "RxServiceMax", &Value);
-+     if (!rc) HalDev->ChData[Ch].RxServiceMax = Value;
-+     }
-+   return (EC_NO_ERRORS);
-+  }
-+#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field
-+
-+static void ChannelConfigUpdate(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
-+  {
-+  int Ch        = HalChn->Channel;
-+  int Direction = HalChn->Direction;
-+#ifdef __CPHAL_DEBUG
-+  if (DBG(1))
-+    {
-+    dbgPrintf("\nChnUpd-HalDev:%08X,Chn:%d:%d\n", (bit32u)HalDev, Ch, Direction); osfuncSioFlush();
-+    }
-+#endif
-+  if (Direction == DIRECTION_TX)
-+    {
-+    ChannelUpdate(TxNumBuffers);
-+    /*ChannelUpdate(TxNumQueues);*/                               /*MJH~030329*/
-+    ChannelUpdate(TxServiceMax);
-+    HalDev->TxIntThreshold[Ch]        = HalDev->ChData[Ch].TxServiceMax;
-+    HalDev->TxIntThresholdMaster[Ch]  = HalDev->TxIntThreshold[Ch];
-+    }
-+  else
-+  if (Direction == DIRECTION_RX)
-+    {
-+    ChannelUpdate(RxBufferOffset);
-+    ChannelUpdate(RxBufSize);
-+    ChannelUpdate(RxNumBuffers);
-+    ChannelUpdate(RxServiceMax);
-+#ifdef __CPHAL_DEBUG
-+  if (DBG(1))
-+    {
-+    dbgPrintf("\nRxNumBuffers %d\n",HalChn->RxNumBuffers); osfuncSioFlush();
-+    }
-+#endif
-+    }
-+  }
-+static int halChannelSetup(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn, OS_SETUP *OsSetup)
-+  {
-+  int Direction;
-+  int Ch;
-+  int rc;
-+
-+  /* Verify proper device state */
-+  if (HalDev->State < enInitialized)
-+    return (EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE);
-+
-+  /* We require the channel structure to be passed, even if it only contains
-+     the channel number */
-+  if (HalChn == NULL)
-+    {
-+     return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_NULL_CH_STRUCT);
-+    }
-+
-+  Ch        = HalChn->Channel;
-+  Direction = HalChn->Direction;
-+
-+  /* This should check on Maximum Channels for RX or TX,
-+     they might be different Mick 021124 */
-+  if ((Ch < 0) || (Ch > (MAX_CHAN-1)))
-+    {
-+     return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_INVALID_CH);
-+    }
-+
-+  /* if channel is already open, this call is invalid */
-+  if (HalDev->ChIsOpen[Ch][Direction] == TRUE)
-+    {
-+     return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_CH_ALREADY_OPEN);
-+    }
-+
-+  /* channel is closed, but might be setup.  If so, reopen the hardware channel. */
-+  if (HalDev->ChIsSetup[Ch][Direction] == FALSE)
-+    {
-+     /* Setup channel configuration */
-+     HalDev->ChData[Ch].Channel = Ch;
-+
-+     /* Store OS_SETUP */
-+     HalDev->ChData[Ch].OsSetup = OsSetup;
-+
-+     /*  Framework :
-+         Set Default Values
-+         Update with options.conf
-+     Apply driver updates
-+     */
-+     ChannelConfigInit(HalDev, HalChn);
-+     ChannelConfigGet(HalDev, HalChn);
-+     ChannelConfigUpdate(HalDev, HalChn);
-+
-+     /* cppi.c needs to use Rx/TxServiceMax */
-+     HalDev->BuffersServicedMax  = 169;  /* TEMP */
-+
-+     HalDev->ChIsSetup[Ch][Direction] = TRUE;
-+    }
-+
-+  rc = EC_NO_ERRORS;
-+
-+  /* If the hardware has been opened (is out of reset), then configure the channel
-+     in the hardware. NOTE: ChannelConfigApply calls the CPSAR ChannelSetup()! */
-+  if (HalDev->State == enOpened)
-+    {
-+     rc = ChannelConfigApply(HalDev, HalChn);
-+    }
-+
-+  return (rc);
-+  }
-+
-+
-+static int miiInfoGet(HAL_DEVICE *HalDev, bit32u *miiBaseAddress, bit32u *miiResetBit)
-+  {
-+  int rc;
-+  void *DeviceInfo;
-+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+
-+  /*  Only one instance of cpmdio   */
-+  rc = OsFunc->DeviceFindInfo(0,"cpmdio",&DeviceInfo);               /*~RC3.02*/
-+
-+  if(rc)
-+     return (EC_DEV_CPMDIO|EC_FUNC_OPEN|EC_VAL_DEVICE_NOT_FOUND );
-+
-+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",miiBaseAddress);
-+  if(rc)
-+      rc=EC_DEV_CPMDIO|EC_FUNC_OPEN|EC_VAL_NO_BASE;
-+
-+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",miiResetBit);
-+  if(rc)
-+      rc=EC_DEV_CPMDIO|EC_FUNC_OPEN|EC_VAL_NO_BASE;
-+
-+
-+  /* See if need to make mdio functional in GPIO */
-+  gpioCheck(HalDev, DeviceInfo);
-+
-+  if(DBG(0))
-+    dbgPrintf("miiBase: 0x%08X %u\n", *miiBaseAddress, *miiResetBit);
-+  return(rc);
-+  }
-+static void ephyCheck(HAL_DEVICE *HalDev)
-+  {                                                                  /*+RC3.02*/
-+  int rc;
-+  void *DeviceInfo;
-+  int mii_phy;
-+  int reset_bit;
-+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+
-+  rc = OsFunc->DeviceFindInfo(0,"ephy",&DeviceInfo);
-+  if(rc) return;
-+
-+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "mii_phy",&mii_phy);
-+  if(rc) return;
-+
-+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit);
-+  if(rc) return;
-+
-+  if (HalDev->PhyMask & (1 << mii_phy))
-+    {
-+    *(volatile bit32u *)(HalDev->ResetBase) |=  (1 << reset_bit);                      /*+RC3.02*/
-+    resetWait(HalDev);
-+    }
-+  }                                                                  /*+RC3.02*/
-+static void AutoNegotiate(HAL_DEVICE *HalDev)
-+  {
-+  int size;
-+  bit32u ModID,  RevMaj,  RevMin;
-+  PHY_DEVICE *PhyDev;
-+  bit32u miiBaseAddress;
-+  bit32u miiResetBit;
-+
-+  /* Verify proper device state */
-+  if (HalDev->State < enOpened)
-+    return;
-+
-+  miiInfoGet(HalDev, &miiBaseAddress, &miiResetBit);
-+
-+  cpMacMdioGetVer(miiBaseAddress, &ModID,  &RevMaj,  &RevMin);
-+  if(HalDev->debug)
-+     dbgPrintf("Mdio Module Id %d, Version %d.%d\n", ModID,  RevMaj,  RevMin);
-+
-+  size = cpMacMdioGetPhyDevSize();
-+  PhyDev = (PHY_DEVICE *) HalDev->OsFunc->Malloc( size );
-+
-+  HalDev->PhyDev = PhyDev;
-+
-+  ephyCheck(HalDev);
-+
-+  cpMacMdioInit( PhyDev, miiBaseAddress, HalDev->inst, HalDev->PhyMask, HalDev->MLinkMask, HalDev->MdixMask, HalDev->ResetBase, miiResetBit, HalDev->MdioBusFrequency, HalDev->MdioClockFrequency, HalDev->debug, HalDev); /*MJH~030402*/
-+  MdioSetPhyMode(HalDev);
-+
-+  return;
-+  }
-+static int halOpen(HAL_DEVICE *HalDev)
-+  {
-+  unsigned char *MacAddr;
-+  int i;
-+  int j;
-+  int rc, Ticks;
-+
-+  if (HalDev->debug)
-+    {
-+      dbgPrintf("halOpen: haldev:0x%08X inst:%d base:0x%08X reset:%d\n", (bit32u) &HalDev, HalDev->inst, HalDev->dev_base, HalDev->ResetBit);
-+      osfuncSioFlush();
-+    }
-+
-+   /* Verify proper device state */
-+   if (HalDev->State < enInitialized)
-+     return (EC_CPMAC|EC_FUNC_OPEN|EC_VAL_INVALID_STATE);
-+
-+
-+  /* take CPMAC out of reset - GSG 11/20*/
-+  if ((VOLATILE32(HalDev->ResetBase) & (1 << HalDev->ResetBit)) != 0)
-+    {
-+     /* perform normal close duties */
-+     CPMAC_MACCONTROL(HalDev->dev_base) &= ~MII_EN;
-+     CPMAC_TX_CONTROL(HalDev->dev_base) &= ~TX_EN;
-+     CPMAC_RX_CONTROL(HalDev->dev_base) &= ~RX_EN;
-+
-+     /* disable interrupt masks */
-+     CPMAC_TX_INTMASK_CLEAR(HalDev->dev_base) = 0xFF;
-+     CPMAC_RX_INTMASK_CLEAR(HalDev->dev_base) = 0xFF;
-+    }
-+
-+   /* take CPMAC out of reset */
-+   *(volatile bit32u *)(HalDev->ResetBase) &= ~(1 << HalDev->ResetBit);
-+   resetWait(HalDev);
-+   *(volatile bit32u *)(HalDev->ResetBase) |=  (1 << HalDev->ResetBit);
-+   resetWait(HalDev);
-+
-+  /* After Reset clear the Transmit and Receive DMA Head Descriptor Pointers */
-+
-+  CPMAC_TX0_HDP(HalDev->dev_base)=0;
-+  CPMAC_TX1_HDP(HalDev->dev_base)=0;
-+  CPMAC_TX2_HDP(HalDev->dev_base)=0;
-+  CPMAC_TX3_HDP(HalDev->dev_base)=0;
-+  CPMAC_TX4_HDP(HalDev->dev_base)=0;
-+  CPMAC_TX5_HDP(HalDev->dev_base)=0;
-+  CPMAC_TX6_HDP(HalDev->dev_base)=0;
-+  CPMAC_TX7_HDP(HalDev->dev_base)=0;
-+
-+  /* Rx Init  */
-+
-+  CPMAC_RX0_HDP(HalDev->dev_base) = 0;
-+  CPMAC_RX1_HDP(HalDev->dev_base) = 0;
-+  CPMAC_RX2_HDP(HalDev->dev_base) = 0;
-+  CPMAC_RX3_HDP(HalDev->dev_base) = 0;
-+  CPMAC_RX4_HDP(HalDev->dev_base) = 0;
-+  CPMAC_RX5_HDP(HalDev->dev_base) = 0;
-+  CPMAC_RX6_HDP(HalDev->dev_base) = 0;
-+  CPMAC_RX7_HDP(HalDev->dev_base) = 0;
-+
-+  CPMAC_RX_BUFFER_OFFSET(HalDev->dev_base) = 0;
-+
-+  /* Init Tx and Rx DMA */
-+
-+  CPMAC_TX_CONTROL(HalDev->dev_base) |= TX_EN;
-+  CPMAC_RX_CONTROL(HalDev->dev_base) |= RX_EN;
-+
-+  CPMAC_MAC_INTMASK_SET(HalDev->dev_base) |=2; /* Enable Adaptercheck Ints */
-+  HalDev->OsFunc->Control(HalDev->OsDev, pszMacAddr, hcGet, &MacAddr); /* GSG 11/22 */
-+  MacAddressSave(HalDev, MacAddr);
-+
-+  HalDev->HostErr = 0;      /* Clear Adapter Check indicator */
-+  HalDev->State = enOpened; /* Change device state */
-+
-+  /* Start MDIO Negotiation */
-+  AutoNegotiate(HalDev);
-+
-+  /*  Enable the Os Timer  */
-+  Ticks = HalDev->CpuFrequency / 100;  /*  10 milli-secs */       /*MJH~030402*/
-+  HalDev->OsFunc->Control(HalDev->OsDev, pszTick, hcSet, &Ticks); /* GSG 11/22 */
-+  HalDev->OsFunc->IsrRegister(HalDev->OsDev, halIsr, HalDev->interrupt);
-+
-+  /* GSG +030523 Malloc space for the Rx fraglist */
-+  HalDev->fraglist = HalDev->OsFunc->Malloc(HalDev->MaxFrags * sizeof(FRAGLIST));
-+
-+  /* Any pre-open configuration */
-+
-+  /* For any channels that have been pre-initialized, set them up now */
-+  /* Note : This loop should not use MAX_CHN, it should only
-+            loop through Channels Setup, memory should not be reserved
-+            until Channel is Setup
-+  */
-+  for(i=0; i<MAX_CHAN; i++) /* i loops through Channels */
-+  for(j=0; j<2; j++)        /* j loops through DIRECTION values, 0 and 1  */
-+    {
-+     if(HalDev->ChIsSetup[i][j]==TRUE)   /* If the Channel and Direction have been Setup */
-+       if(HalDev->ChIsOpen[i][j]==FALSE) /* but not opened, then Apply Values now */
-+         {
-+          CHANNEL_INFO HalChn;
-+          HalChn.Channel   = i;
-+          HalChn.Direction = j;
-+          rc = ChannelConfigApply(HalDev, &HalChn);
-+          if(rc != EC_NO_ERRORS)
-+            return(rc);
-+         }
-+    }  /* End of looping through Channel/Direction */
-+
-+  ConfigApply(HalDev);  /* Apply Configuration Values to Device */
-+  CPMAC_MACCONTROL(HalDev->dev_base) |= MII_EN;  /* MAC_EN */
-+  if(DBG(0))
-+     dbgPrintf("[halOpen]MacControl:%08X\n", CPMAC_MACCONTROL(HalDev->dev_base));
-+  return(EC_NO_ERRORS);
-+  }
-+
-+#define INT_PENDING (MAC_IN_VECTOR_TX_INT_OR | MAC_IN_VECTOR_RX_INT_OR | MAC_IN_VECTOR_HOST_INT)
-+static int halShutdown(HAL_DEVICE *HalDev)
-+  {
-+   int Ch, Queue;                                                  /*GSG+030514*/
-+
-+   /* Verify proper device state */
-+   if (HalDev->State == enOpened)
-+     halClose(HalDev, 3); /* GSG ~030429 */
-+
-+   /* Buffer/descriptor resources may still need to be freed if a Close
-+      Mode 1 was performed prior to Shutdown - clean up here */    /*GSG+030514*/
-+   for (Ch=0; Ch<MAX_CHAN; Ch++)
-+     {
-+      if (HalDev->RcbStart[Ch] != 0)
-+        FreeRx(HalDev,Ch);
-+
-+      for(Queue=0; Queue<MAX_QUEUE; Queue++)
-+        {
-+         if (HalDev->TcbStart[Ch][Queue] != 0)
-+           FreeTx(HalDev,Ch,Queue);
-+        }
-+     }
-+
-+   /* free the HalFunc */
-+   HalDev->OsFunc->Free(HalDev->HalFuncPtr);
-+
-+   /* free the HAL device */
-+   HalDev->OsFunc->Free(HalDev);
-+
-+   return(EC_NO_ERRORS);
-+  }
-+int halIsr(HAL_DEVICE *HalDev, int *MorePackets)
-+{
-+  bit32u IntVec;
-+  int Serviced;
-+  int PacketsServiced=0;
-+  int Channel;
-+  int TxMorePackets=0;
-+  int RxMorePackets=0;
-+
-+  /* Verify proper device state - important because a call prior to Open would
-+      result in a lockup */
-+  if (HalDev->State != enOpened)
-+     return(EC_CPMAC|EC_FUNC_DEVICE_INT|EC_VAL_INVALID_STATE);
-+
-+  IntVec = CPMAC_MAC_IN_VECTOR(HalDev->dev_base);
-+
-+#ifdef __CPHAL_DEBUG
-+  if (DBG(0))
-+    {
-+    dbgPrintf("\nhalIsr: inst %d, IntVec 0x%X\n", HalDev->inst, IntVec); osfuncSioFlush();/* GSG 11/22 */
-+    }
-+#endif
-+
-+  HalDev->IntVec = IntVec;
-+  if (IntVec & MAC_IN_VECTOR_TX_INT_OR)
-+   {
-+     int TxServiceMax=0;  /* Compiler complains if not initialized */
-+      
-+     Channel = (IntVec & 0x7);
-+     
-+     if(HalDev->TxIntDisable)
-+       {
-+         CPMAC_TX_INTMASK_CLEAR(HalDev->dev_base) = (1<<Channel);  /* Disable Interrupt for Channel */           
-+         TxServiceMax = HalDev->ChData[Channel].TxServiceMax;  
-+         HalDev->ChData[Channel].TxServiceMax = 10000;             /* Need to service all packets in the Queue */
-+       }      
-+     
-+     PacketsServiced |= TxInt(HalDev, Channel, 0, &TxMorePackets);
-+     
-+     if(HalDev->TxIntDisable)        
-+          HalDev->ChData[Channel].TxServiceMax  = TxServiceMax;         
-+    }
-+  
-+  if (IntVec & MAC_IN_VECTOR_RX_INT_OR)
-+    {
-+     Channel = (IntVec >> 8) & 0x7;
-+     Serviced = RxInt(HalDev, Channel, &RxMorePackets);
-+     PacketsServiced |= (Serviced<<16);
-+    }
-+
-+  if (IntVec & MAC_IN_VECTOR_HOST_INT)
-+    {
-+    /* Adaptercheck */
-+    HalDev->HostErr = 1;
-+    HalDev->MacStatus = CPMAC_MACSTATUS(HalDev->dev_base);
-+    osfuncStateChange();                                          /*MJH+030328*/
-+    if(DBG(0))
-+      {
-+      dbgPrintf("Adaptercheck: %08x for base:%X\n",HalDev->MacStatus, (bit32u)HalDev->dev_base);
-+      osfuncSioFlush();
-+      }
-+    }
-+  *MorePackets = (TxMorePackets | RxMorePackets);
-+  return (PacketsServiced);
-+}
-+
-+int halPacketProcessEnd(HAL_DEVICE *HalDev)
-+{
-+  int base             = HalDev->dev_base;
-+  CPMAC_MAC_EOI_VECTOR(base) = 0;
-+  return(0);
-+}
-+
-+
-+
-+static int PhyCheck(HAL_DEVICE *HalDev)
-+  {
-+      return(cpMacMdioTic(HalDev->PhyDev));
-+  }
-+static int halTick(HAL_DEVICE *HalDev)
-+{
-+    int TickChange;
-+
-+    if(HalDev->State <  enOpened)
-+      return (EC_CPMAC|EC_FUNC_TICK|EC_VAL_INVALID_STATE);
-+
-+    /* if NO Phy no need to check Link */
-+    if(HalDev->MdioConnect & _CPMDIO_NOPHY)
-+      return(EC_NO_ERRORS);  /* No change in Phy State detected */
-+
-+    TickChange = PhyCheck(HalDev);
-+    /* Phy State Change Detected */
-+    if(TickChange == 1)
-+    {
-+        /*  MDIO indicated a change  */
-+        DuplexUpdate(HalDev);
-+        osfuncStateChange();
-+        return(EC_NO_ERRORS);
-+    }
-+
-+    /* if in AutoMdix mode, and Flip request received, inform OS */
-+    if( (HalDev->MdioConnect & _CPMDIO_AUTOMDIX)  &&
-+        (TickChange & _MIIMDIO_MDIXFLIP))
-+    {
-+       bit32u Mdix;
-+       Mdix = TickChange & 0x1;   /*  Mdix mode stored in bit 0 */
-+       HalDev->OsFunc->Control(HalDev->OsDev, hcMdioMdixSwitch, hcSet, &Mdix);
-+       return(EC_NO_ERRORS);
-+    }
-+
-+    return(EC_NO_ERRORS);
-+}
-+
-+int halCpmacInitModule(HAL_DEVICE **pHalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS **pHalFunc,
-+                       OS_FUNCTIONS *OsFunc, int OsFuncSize,     int *HalFuncSize, int Inst)
-+  {
-+    HAL_DEVICE *HalDev;
-+    HAL_FUNCTIONS *HalFunc;
-+
-+    if (OsFuncSize < sizeof(OS_FUNCTIONS))
-+      return (EC_CPMAC|EC_FUNC_HAL_INIT|EC_VAL_OS_VERSION_NOT_SUPPORTED);
-+
-+    HalDev = (HAL_DEVICE *) OsFunc->MallocDev(sizeof(HAL_DEVICE));
-+    if (!HalDev)
-+      return (EC_CPMAC|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_DEV_FAILED);
-+
-+    /* clear the HalDev area */
-+    OsFunc->Memset(HalDev, 0, sizeof(HAL_DEVICE));
-+
-+    /* Initialize the size of hal functions */
-+    *HalFuncSize = sizeof (HAL_FUNCTIONS);
-+
-+    HalFunc = (HAL_FUNCTIONS *) OsFunc->Malloc(sizeof(HAL_FUNCTIONS));
-+    if (!HalFunc)
-+      return (EC_CPMAC|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_FAILED);
-+
-+    /* clear the function pointers */
-+    OsFunc->Memset(HalFunc, 0, sizeof(HAL_FUNCTIONS));
-+
-+    HalDev->OsDev   = OsDev;
-+    HalDev->OsOpen  = OsDev;
-+    HalDev->inst    = Inst;
-+    HalDev->OsFunc  = OsFunc;
-+    HalDev->HalFunc = HalFunc;
-+    /* Remove the following from cppi, replace with HalFunc */
-+    HalDev->HalFuncPtr = HalFunc; /* GSG 11/20 changed name to match cppi */
-+
-+    /****************************************************************/
-+    /*                 POPULATE HALFUNC                             */
-+    /****************************************************************/
-+    HalFunc->ChannelSetup     = halChannelSetup;
-+    HalFunc->ChannelTeardown  = halChannelTeardown; /* GSG 11/20 */
-+    HalFunc->Close            = halClose; /* GSG 11/20 */
-+    HalFunc->Control          = halControl; /* GSG 11/22 */
-+    HalFunc->Init             = halInit;
-+    HalFunc->Open             = halOpen;
-+    HalFunc->PacketProcessEnd = halPacketProcessEnd;
-+    HalFunc->Probe            = halProbe;
-+    HalFunc->RxReturn         = halRxReturn;
-+    HalFunc->Send             = halSend;
-+    HalFunc->Shutdown         = halShutdown;
-+    HalFunc->Tick             = halTick;
-+
-+    /* HalFunc->Status        = halStatus;*/ /* GSG 11/22 */
-+    /* pass the HalDev and HalFunc back to the caller */
-+
-+    *pHalDev  = HalDev;
-+    *pHalFunc = HalFunc;
-+
-+    HalDev->State = enConnected;   /* Initialize the hardware state */
-+
-+    if (HalDev->debug) HalDev->OsFunc->Printf("halCpmacInitModule: Leave\n");
-+    return(0);
-+  }
-+
-+int cpmacRandomRange(HAL_DEVICE *HalDev, int min, int max)
-+{
-+    int iTmp;
-+    iTmp  = cpmacRandom(HalDev);
-+    iTmp %= ((max-min)+1);
-+    iTmp += min;
-+    return(iTmp);
-+}
-+
-+int cpmacRandom(HAL_DEVICE *HalDev)
-+{
-+    int iTmp;
-+    iTmp = CPMAC_BOFFTEST(HalDev->dev_base);
-+    iTmp >>= 16;      /*  get rndnum field */
-+    iTmp &= (0x3FF); /* field is 10 bits wide */
-+    return(iTmp);
-+}
-diff -urN linux.old/drivers/net/avalanche_cpmac/hcpmac.h linux.dev/drivers/net/avalanche_cpmac/hcpmac.h
---- linux.old/drivers/net/avalanche_cpmac/hcpmac.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/hcpmac.h	2005-07-12 02:48:42.175574000 +0200
-@@ -0,0 +1,383 @@
-+/** @file***********************************************************************
-+ *  TNETDxxxx Software Support
-+ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  FILE:
-+ *
-+ *  DESCRIPTION:
-+ *      This file contains definitions for the HAL EMAC API
-+ *
-+ *  HISTORY:
-+ *  xxXxx01 Denis      1.00  Original Version created.
-+ *  22Jan02 Denis/Mick 1.01  Modified for HAL EMAC API
-+ *  24Jan02 Denis/Mick 1.02  Speed Improvements
-+ *  28Jan02 Denis/Mick 1.16  Made function calls pointers
-+ *  28Jan02 Mick       1.18  Split into separate modules
-+ *  @author Michael Hanrahan
-+ *  @version 1.02
-+ *  @date    24-Jan-2002
-+ *****************************************************************************/
-+#ifndef _INC_HCPMAC
-+#define _INC_HCPMAC
-+
-+/** \namespace CPMAC_Version
-+This documents version 01.07.04 of the CPMAC CPHAL.
-+*/
-+const char *pszVersion_CPMAC="CPMAC 01.07.08 "__DATE__" "__TIME__;
-+
-+/* CHECK THESE LOCATIONS */
-+#define TEARDOWN_VAL       0xfffffffc
-+#define CB_OFFSET_MASK     0xFFFF0000
-+
-+
-+#define MAX_CHAN 8
-+#define MAX_QUEUE 1
-+
-+typedef struct
-+  {
-+  bit32 HNext;      /*< Hardware's pointer to next buffer descriptor  */
-+  bit32 BufPtr;     /*< Pointer to the data buffer                    */
-+  bit32 Off_BLen;   /*< Contains buffer offset and buffer length      */
-+  bit32 mode;       /*< SOP, EOP, Ownership, EOQ, Teardown, Q Starv, Length */
-+  void *Next;
-+  void *OsInfo;
-+  void *Eop;
-+#ifdef __CPHAL_DEBUG
-+  bit32 DbgSop;
-+  bit32 DbgData;
-+  bit32 DbgFraglist;
-+#endif
-+  }HAL_TCB;
-+
-+typedef volatile struct hal_private
-+  {
-+  bit32 HNext;      /*< Hardware's pointer to next buffer descriptor     */
-+  bit32 BufPtr;     /*< Pointer to the data buffer                       */
-+  bit32 Off_BLen;   /*< Contains buffer offset and buffer length         */
-+  bit32 mode;       /*< SOP, EOP, Ownership, EOQ, Teardown Complete bits */
-+  void *DatPtr;
-+  void *Next;
-+  void *OsInfo;
-+  void *Eop;
-+  }HAL_RCB;
-+
-+#define MAX_NEEDS 512                                             /*MJH+030409*/
-+/*  HAL  */
-+
-+typedef struct hal_device
-+  {
-+  OS_DEVICE *OsDev;
-+  OS_FUNCTIONS *OsFunc;
-+    /*OS_SETUP *OsSetup;*/                                     /* -GSG 030508 */
-+  int inst;
-+  bit32u rxbufseq;
-+
-+
-+  bit32 dev_base;
-+  bit32  offset;
-+
-+  bit32u ResetBase; /* GSG 10/20 */
-+  int ResetBit;
-+  void *OsOpen;
-+  bit32u IntVec;
-+  PHY_DEVICE *PhyDev;
-+  bit32u EmacDuplex;
-+  bit32u EmacSpeed;
-+  bit32u PhyNum;
-+  bit32u MLinkMask;
-+  bit32u PhyMask;
-+  bit32u MdixMask;
-+
-+  bit32u Linked;
-+  DEVICE_STATE State;
-+  unsigned char *MacAddr;
-+  HAL_FUNCTIONS *HalFuncPtr; /* GSG 11/20 changed name to match cppi */
-+  HAL_FUNCTIONS *HalFunc;
-+/*  unsigned int CpuFreq;*/                                       /*MJH-030402*/
-+  unsigned int MdioConnect;
-+  unsigned int HostErr;
-+
-+/************************************************************************/
-+/*                                                                      */
-+/*      R E G I S T E R S                                               */
-+/*                                                                      */
-+/************************************************************************/
-+
-+  bit32u RxMbpEnable;
-+  bit32u RxUnicastSet;
-+  bit32u RxUnicastClear;
-+  bit32u RxMaxLen;
-+  bit32u RxFilterLowThresh;
-+  bit32u Rx0FlowThresh;
-+  bit32u MacControl;
-+  bit32u MacStatus;
-+  bit32u MacHash1;
-+  bit32u MacHash2;
-+
-+/************************************************************************/
-+/*                                                                      */
-+/*      O P T I O N S                                                   */
-+/*                                                                      */
-+/************************************************************************/
-+
-+  char *DeviceInfo;
-+  bit32u interrupt;
-+
-+
-+  bit32u RxPassCrc;
-+  bit32u RxCaf;
-+  bit32u RxCef;
-+  bit32u RxBcast;
-+  bit32u RxBcastCh;
-+  HAL_RCB *RcbPool[MAX_CHAN];
-+  bit32 RxActQueueCount[MAX_CHAN];
-+  HAL_RCB *RxActQueueHead[MAX_CHAN];
-+  HAL_RCB *RxActQueueTail[MAX_CHAN];
-+  bit32 RxActive[MAX_CHAN];
-+  HAL_TCB *TcbPool[MAX_CHAN][MAX_QUEUE];
-+  bit32 TxActQueueCount[MAX_CHAN][MAX_QUEUE];
-+  HAL_TCB *TxActQueueHead[MAX_CHAN][MAX_QUEUE];
-+  HAL_TCB *TxActQueueTail[MAX_CHAN][MAX_QUEUE];
-+  bit32 TxActive[MAX_CHAN][MAX_QUEUE];
-+  bit32 TxTeardownPending[MAX_CHAN];
-+  bit32 RxTeardownPending[MAX_CHAN];
-+  bit32 ChIsOpen[MAX_CHAN][2];
-+  bit32 ChIsSetup[MAX_CHAN][2];
-+  FRAGLIST *fraglist;
-+  char *TcbStart[MAX_CHAN][MAX_QUEUE];
-+  char *RcbStart[MAX_CHAN];
-+  bit32 RcbSize[MAX_CHAN];
-+/*  STAT_INFO Stats;  */
-+  bit32  Inst;
-+  bit32u BuffersServicedMax;
-+  CHANNEL_INFO ChData[MAX_CHAN];
-+  bit32u MdioClockFrequency;                                      /*MJH+030402*/
-+  bit32u MdioBusFrequency;                                        /*MJH+030402*/
-+  bit32u CpuFrequency;                                            /*MJH+030402*/
-+  bit32u CpmacFrequency;                                          /*MJH+030403*/
-+  bit32u CpmacSize;                                               /*MJH+030425*/
-+  int debug;
-+  bit32u NeedsCount;                                              /*MJH+030409*/
-+  HAL_RECEIVEINFO *Needs[MAX_NEEDS];                              /*MJH+030409*/
-+  int MaxFrags;
-+  int TxIntThreshold[MAX_CHAN];                   /* MJH 040621  NSP Performance Update */
-+  int TxIntThresholdMaster[MAX_CHAN];             /* MJH 040827  NSP Performance Update */
-+  int TxIntDisable;                     /* MJH 040621  NSP Performance Update */  
-+  }HALDEVICE;
-+
-+#define STATS_MAX 36
-+
-+#define MACCONTROL_MASK    (TX_PTYPE|TX_PACE|TX_FLOW_EN|RX_FLOW_EN|CTRL_LOOPBACK)
-+#define RX_MBP_ENABLE_MASK                                       \
-+        (RX_PASS_CRC|RX_QOS_EN|RX_NO_CHAIN|                      \
-+         RX_CMF_EN|RX_CSF_EN|RX_CEF_EN|RX_CAF_EN|RX_PROM_CH_MASK|     \
-+         RX_BROAD_EN|RX_BROAD_CH_MASK|RX_MULT_EN|RX_MULT_CH_MASK)
-+
-+
-+#define MBP_UPDATE(Mask, On)                      \
-+         if(On)   HalDev->RxMbpEnable |=  Mask;   \
-+         else     HalDev->RxMbpEnable &= ~Mask
-+
-+#define CONTROL_UPDATE(Mask, On)                  \
-+         if(On)   HalDev->MacControl |=  Mask;    \
-+         else     HalDev->MacControl &= ~Mask
-+
-+
-+#define UPDATE_TX_PTYPE(Value)       CONTROL_UPDATE(TX_PTYPE,Value)
-+#define UPDATE_TX_PACE(Value)        CONTROL_UPDATE(TX_PACE,Value)
-+#define UPDATE_MII_EN(Value)         CONTROL_UPDATE(MII_EN,Value)
-+#define UPDATE_TX_FLOW_EN(Value)     CONTROL_UPDATE(TX_FLOW_EN,Value)
-+#define UPDATE_RX_FLOW_EN(Value)     CONTROL_UPDATE(RX_FLOW_EN,Value)
-+#define UPDATE_CTRL_LOOPBACK(Value)  CONTROL_UPDATE(CTRL_LOOPBACK,Value)
-+#define UPDATE_FULLDUPLEX(Value)     CONTROL_UPDATE(FULLDUPLEX,(Value))
-+
-+#define UPDATE_RX_PASS_CRC(Value)    MBP_UPDATE(RX_PASS_CRC,  Value)
-+#define UPDATE_RX_QOS_EN(Value)      MBP_UPDATE(RX_QOS_EN,    Value)
-+#define UPDATE_RX_NO_CHAIN(Value)    MBP_UPDATE(RX_NO_CHAIN,  Value)
-+#define UPDATE_RX_CMF_EN(Value)      MBP_UPDATE(RX_CMF_EN,    Value)
-+#define UPDATE_RX_CSF_EN(Value)      MBP_UPDATE(RX_CSF_EN,    Value)
-+#define UPDATE_RX_CEF_EN(Value)      MBP_UPDATE(RX_CEF_EN,    Value)
-+#define UPDATE_RX_CAF_EN(Value)      MBP_UPDATE(RX_CAF_EN,    Value)
-+#define UPDATE_RX_BROAD_EN(Value)    MBP_UPDATE(RX_BROAD_EN,  Value)
-+#define UPDATE_RX_MULT_EN(Value)     MBP_UPDATE(RX_MULT_EN,   Value)
-+
-+#define UPDATE_RX_PROM_CH(Value)                         \
-+        HalDev->RxMbpEnable &=  ~RX_PROM_CH_MASK;        \
-+        HalDev->RxMbpEnable |=   RX_PROM_CH(Value)
-+
-+#define UPDATE_RX_BROAD_CH(Value)                        \
-+           HalDev->RxMbpEnable &=  ~RX_BROAD_CH_MASK;    \
-+           HalDev->RxMbpEnable |=   RX_BROAD_CH(Value)
-+
-+#define UPDATE_RX_MULT_CH(Value)                         \
-+           HalDev->RxMbpEnable &=  ~RX_MULT_CH_MASK;     \
-+           HalDev->RxMbpEnable |=   RX_MULT_CH(Value)
-+
-+
-+
-+typedef enum
-+  {
-+   /*  CPMAC */
-+    enCpmacStart=0,
-+    enStats0,
-+    enStats1,
-+    enStats2,
-+    enStats3,
-+    enStats4,
-+    enStatsDump,
-+    enStatsClear,
-+    enRX_PASS_CRC,
-+    enRX_QOS_EN,
-+    enRX_NO_CHAIN,
-+    enRX_CMF_EN,
-+    enRX_CSF_EN,
-+    enRX_CEF_EN,
-+    enRX_CAF_EN,
-+    enRX_PROM_CH,
-+    enRX_BROAD_EN,
-+    enRX_BROAD_CH,
-+    enRX_MULT_EN,
-+    enRX_MULT_CH,
-+
-+    enTX_PTYPE,
-+    enTX_PACE,
-+    enMII_EN,
-+    enTX_FLOW_EN,
-+    enRX_FLOW_EN,
-+    enCTRL_LOOPBACK,
-+
-+    enRX_MAXLEN,
-+    enRX_FILTERLOWTHRESH,
-+    enRX0_FLOWTHRESH,
-+    enRX_UNICAST_SET,
-+    enRX_UNICAST_CLEAR,
-+    enMdioConnect,
-+    enMAC_ADDR_GET,
-+    enTick,
-+    enRX_MULTICAST,
-+    enRX_MULTI_ALL,
-+    enRX_MULTI_SINGLE,
-+    enVersion,
-+    enCpmacEnd                                   /* Last entry */
-+  }INFO_KEY_CPMAC;
-+
-+static const char pszVersion[]                 = "Version";
-+static const char pszStats0[]                  = "Stats0";
-+static const char pszStats1[]                  = "Stats1";
-+static const char pszStats2[]                  = "Stats2";
-+static const char pszStats3[]                  = "Stats3";
-+static const char pszStats4[]                  = "Stats4";
-+static const char pszStatsDump[]               = "StatsDump";
-+static const char pszStatsClear[]              = "StatsClear";
-+
-+/********************************************************************
-+**
-+**  RX MBP ENABLE
-+**
-+********************************************************************/
-+static const char pszRX_PASS_CRC[]             = "RX_PASS_CRC";
-+static const char pszRX_QOS_EN[]               = "RX_QOS_EN";
-+static const char pszRX_NO_CHAIN[]             = "RX_NO_CHAIN";
-+static const char pszRX_CMF_EN[]               = "RX_CMF_EN";
-+static const char pszRX_CSF_EN[]               = "RX_CSF_EN";
-+static const char pszRX_CEF_EN[]               = "RX_CEF_EN";
-+static const char pszRX_CAF_EN[]               = "RX_CAF_EN";
-+static const char pszRX_PROM_CH[]              = "RX_PROM_CH";
-+static const char pszRX_BROAD_EN[]             = "RX_BROAD_EN";
-+static const char pszRX_BROAD_CH[]             = "RX_BROAD_CH";
-+static const char pszRX_MULT_EN[]              = "RX_MULT_EN";
-+static const char pszRX_MULT_CH[]              = "RX_MULT_CH";
-+
-+
-+/********************************************************************
-+**
-+**  MAC CONTROL
-+**
-+********************************************************************/
-+static const char pszTX_PTYPE[]                = "TX_PTYPE";
-+static const char pszTX_PACE[]                 = "TX_PACE";
-+static const char pszMII_EN[]                  = "MII_EN";
-+static const char pszTX_FLOW_EN[]              = "TX_FLOW_EN";
-+static const char pszRX_FLOW_EN[]              = "RX_FLOW_EN";
-+static const char pszCTRL_LOOPBACK[]           = "CTRL_LOOPBACK";
-+
-+static const char pszRX_MAXLEN[]               = "RX_MAXLEN";
-+static const char pszRX_FILTERLOWTHRESH[]      = "RX_FILTERLOWTHRESH";
-+static const char pszRX0_FLOWTHRESH[]          = "RX0_FLOWTHRESH";
-+static const char pszRX_UNICAST_SET[]          = "RX_UNICAST_SET";
-+static const char pszRX_UNICAST_CLEAR[]        = "RX_UNICAST_CLEAR";
-+static const char pszMdioConnect[]             = "MdioConnect";
-+static const char pszMacAddr[]                 = "MacAddr";
-+static const char pszTick[]                    = "Tick";
-+
-+/********************************************************************
-+**
-+**  MULTICAST
-+**
-+********************************************************************/
-+
-+static const char pszRX_MULTICAST[]            = "RX_MULTICAST";
-+static const char pszRX_MULTI_ALL[]            = "RX_MULTI_ALL";
-+static const char pszRX_MULTI_SINGLE[]         = "RX_MULTI_SINGLE";
-+
-+/*
-+static const char* pszGFHN = "GFHN";
-+*/
-+
-+static const CONTROL_KEY KeyCpmac[] =
-+   {
-+     {""                           , enCpmacStart},
-+     {pszStats0                    , enStats0},
-+     {pszStats1                    , enStats1},
-+     {pszStats2                    , enStats2},
-+     {pszStats3                    , enStats3},
-+     {pszStats4                    , enStats4},
-+     {pszStatsClear                , enStatsClear},
-+     {pszStatsDump                 , enStatsDump},
-+     {pszRX_PASS_CRC               , enRX_PASS_CRC},
-+     {pszRX_QOS_EN                 , enRX_QOS_EN},
-+     {pszRX_NO_CHAIN               , enRX_NO_CHAIN},
-+     {pszRX_CMF_EN                 , enRX_CMF_EN},
-+     {pszRX_CSF_EN                 , enRX_CSF_EN},
-+     {pszRX_CEF_EN                 , enRX_CEF_EN},
-+     {pszRX_CAF_EN                 , enRX_CAF_EN},
-+     {pszRX_PROM_CH                , enRX_PROM_CH},
-+     {pszRX_BROAD_EN               , enRX_BROAD_EN},
-+     {pszRX_BROAD_CH               , enRX_BROAD_CH},
-+     {pszRX_MULT_EN                , enRX_MULT_EN},
-+     {pszRX_MULT_CH                , enRX_MULT_CH},
-+
-+     {pszTX_PTYPE                  , enTX_PTYPE},
-+     {pszTX_PACE                   , enTX_PACE},
-+     {pszMII_EN                    , enMII_EN},
-+     {pszTX_FLOW_EN                , enTX_FLOW_EN},
-+     {pszRX_FLOW_EN                , enRX_FLOW_EN},
-+     {pszCTRL_LOOPBACK             , enCTRL_LOOPBACK},
-+     {pszRX_MAXLEN                 , enRX_MAXLEN},
-+     {pszRX_FILTERLOWTHRESH        , enRX_FILTERLOWTHRESH},
-+     {pszRX0_FLOWTHRESH            , enRX0_FLOWTHRESH},
-+     {pszRX_UNICAST_SET            , enRX_UNICAST_SET},
-+     {pszRX_UNICAST_CLEAR          , enRX_UNICAST_CLEAR},
-+     {pszMdioConnect               , enMdioConnect},
-+     {pszRX_MULTICAST              , enRX_MULTICAST},
-+     {pszRX_MULTI_ALL              , enRX_MULTI_ALL},
-+     {pszRX_MULTI_SINGLE           , enRX_MULTI_SINGLE},
-+     {pszTick                      , enTick},
-+     {pszVersion                   , enVersion},
-+     {""                           , enCpmacEnd}
-+   };
-+
-+const char hcCpuFrequency[]       = "CpuFreq";
-+const char hcCpmacFrequency[]     = "CpmacFrequency";
-+const char hcMdioBusFrequency[]   = "MdioBusFrequency";
-+const char hcMdioClockFrequency[] = "MdioClockFrequency";
-+const char hcCpmacBase[]          = "CpmacBase";
-+const char hcPhyNum[]             = "PhyNum";
-+const char hcSize[]               = "size";
-+const char hcCpmacSize[]          = "CpmacSize";
-+const char hcPhyAccess[]          = "PhyAccess";
-+const char hcLinked[]             = "Linked";
-+const char hcFullDuplex[]         = "FullDuplex";
-+const char hcMdixMask[]           = "MdixMask";
-+const char hcMdioMdixSwitch[]     = "MdixSet";
-+#endif
-diff -urN linux.old/drivers/net/avalanche_cpmac/Makefile linux.dev/drivers/net/avalanche_cpmac/Makefile
---- linux.old/drivers/net/avalanche_cpmac/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/Makefile	2005-07-12 02:48:42.175574000 +0200
-@@ -0,0 +1,26 @@
-+# File: drivers/net/avalanche_cpmac/Makefile
-+#
-+# Makefile for the Linux network (CPMAC) device drivers.
-+#
-+
-+O_TARGET := avalanche_cpmac.o
-+
-+
-+list-multi := avalanche_cpmac.o
-+obj-$(CONFIG_MIPS_AVALANCHE_CPMAC) := avalanche_cpmac.o
-+
-+avalanche_cpmac-objs += cpmac.o            cpmacHalLx.o       hcpmac.o \
-+                        	      psp_config_build.o psp_config_mgr.o            \
-+				      psp_config_parse.o psp_config_util.o
-+
-+
-+include $(TOPDIR)/Rules.make
-+
-+
-+avalanche_cpmac.o:        $(avalanche_cpmac-objs)
-+	$(LD) -r -o $@ $(avalanche_cpmac-objs)
-+
-+
-+
-+clean:
-+	rm -f core *.o *.a *.s
-diff -urN linux.old/drivers/net/avalanche_cpmac/mdio_reg.h linux.dev/drivers/net/avalanche_cpmac/mdio_reg.h
---- linux.old/drivers/net/avalanche_cpmac/mdio_reg.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/mdio_reg.h	2005-07-12 02:48:42.176573000 +0200
-@@ -0,0 +1,121 @@
-+/****************************************************************************
-+**      TNETD53xx Software Support
-+**      Copyright(c) 2002, Texas Instruments Incorporated. All Rights Reserved.
-+**
-+**      FILE: mdio_reg.h   Register definitions for the VBUS MII module
-+**
-+**      DESCRIPTION:
-+**              This include file contains register definitions for the
-+**              VBUS MII module.
-+**
-+**      HISTORY:
-+**              27Mar02 Michael Hanrahan Original (modified from emacmdio.h)
-+**              01Apr02 Michael Hanrahan Modified to include all regs. in spec
-+**              03Apr02 Michael Hanrahan Updated to Version 0.6 of spec
-+**              05Apr02 Michael Hanrahan Moved Phy Mode values into here
-+**              30Apr02 Michael Hanrahan Updated to Version 0.8 of spec
-+**              30Apr02 Michael Hanrahan Updated to recommended format
-+**              10May02 Michael Hanrahan Updated to Version 0.9 of spec
-+*****************************************************************************/
-+#ifndef _INC_MDIO_REG
-+#define _INC_MDIO_REG
-+
-+/***************************************************************************
-+**                                                                         
-+**         M D I O  M E M O R Y  M A P 
-+**                                                                         
-+***************************************************************************/
-+
-+
-+#define pMDIO_VER(base)                 ((volatile bit32u *)(base+0x00))
-+#define pMDIO_CONTROL(base)             ((volatile bit32u *)(base+0x04))
-+#define pMDIO_ALIVE(base)               ((volatile bit32u *)(base+0x08))
-+#define pMDIO_LINK(base)                ((volatile bit32u *)(base+0x0C))
-+#define pMDIO_LINKINTRAW(base)          ((volatile bit32u *)(base+0x10))
-+#define pMDIO_LINKINTMASKED(base)       ((volatile bit32u *)(base+0x14))
-+#define pMDIO_USERINTRAW(base)          ((volatile bit32u *)(base+0x20))
-+#define pMDIO_USERINTMASKED(base)       ((volatile bit32u *)(base+0x24))
-+#define pMDIO_USERINTMASKED_SET(base)   ((volatile bit32u *)(base+0x28))
-+#define pMDIO_USERINTMASKED_CLR(base)   ((volatile bit32u *)(base+0x2C))
-+#define pMDIO_USERACCESS(base, channel) ((volatile bit32u *)(base+(0x80+(channel*8))))
-+#define pMDIO_USERPHYSEL(base, channel) ((volatile bit32u *)(base+(0x84+(channel*8))))
-+
-+
-+/***************************************************************************
-+**                                                                         
-+**         M D I O  R E G I S T E R  A C C E S S  M A C R O S 
-+**                                                                         
-+***************************************************************************/
-+
-+
-+#define MDIO_ALIVE(base)                    (*(pMDIO_ALIVE(base)))
-+#define MDIO_CONTROL(base)                  (*(pMDIO_CONTROL(base)))
-+#define         MDIO_CONTROL_IDLE                 (1 << 31)
-+#define         MDIO_CONTROL_ENABLE               (1 << 30)
-+#define         MDIO_CONTROL_PREAMBLE             (1 << 20)  
-+#define         MDIO_CONTROL_FAULT                (1 << 19)
-+#define         MDIO_CONTROL_FAULT_DETECT_ENABLE  (1 << 18)
-+#define         MDIO_CONTROL_INT_TEST_ENABLE      (1 << 17)
-+#define         MDIO_CONTROL_HIGHEST_USER_CHANNEL (0x1F << 8)
-+#define         MDIO_CONTROL_CLKDIV               (0xFF)
-+#define MDIO_LINK(base)                     (*(pMDIO_LINK(base)))
-+#define MDIO_LINKINTRAW(base)               (*(pMDIO_LINKINTRAW(base)))
-+#define MDIO_LINKINTMASKED(base)            (*(pMDIO_LINKINTMASKED(base)))
-+#define MDIO_USERINTRAW(base)               (*(pMDIO_USERINTRAW(base)))
-+#define MDIO_USERINTMASKED(base)            (*(pMDIO_USERINTMASKED(base)))
-+#define MDIO_USERINTMASKED_CLR(base)        (*(pMDIO_USERINTMASKED_CLR(base)))
-+#define MDIO_USERINTMASKED_SET(base)        (*(pMDIO_USERINTMASKED_SET(base)))
-+#define MDIO_USERINTRAW(base)               (*(pMDIO_USERINTRAW(base)))
-+#define MDIO_USERACCESS(base, channel)      (*(pMDIO_USERACCESS(base, channel)))
-+#define         MDIO_USERACCESS_GO     (1 << 31)
-+#define         MDIO_USERACCESS_WRITE  (1 << 30)
-+#define         MDIO_USERACCESS_READ   (0 << 30)
-+#define         MDIO_USERACCESS_ACK    (1 << 29)
-+#define         MDIO_USERACCESS_REGADR (0x1F << 21)
-+#define         MDIO_USERACCESS_PHYADR (0x1F << 16)
-+#define         MDIO_USERACCESS_DATA   (0xFFFF)
-+#define MDIO_USERPHYSEL(base, channel)      (*(pMDIO_USERPHYSEL(base, channel)))
-+#define         MDIO_USERPHYSEL_LINKSEL         (1 << 7)
-+#define         MDIO_USERPHYSEL_LINKINT_ENABLE  (1 << 6)
-+#define         MDIO_USERPHYSEL_PHYADR_MON      (0x1F)
-+#define MDIO_VER(base)                      (*(pMDIO_VER(base)))
-+#define         MDIO_VER_MODID         (0xFFFF << 16)
-+#define         MDIO_VER_REVMAJ        (0xFF   << 8)
-+#define         MDIO_VER_REVMIN        (0xFF)
-+
-+
-+
-+
-+/****************************************************************************/
-+/*                                                                          */
-+/*         P H Y   R E G I S T E R  D E F I N I T I O N S                   */
-+/*                                                                          */
-+/****************************************************************************/
-+
-+
-+#define PHY_CONTROL_REG       0
-+  #define PHY_RESET           (1<<15)
-+  #define PHY_LOOP            (1<<14)
-+  #define PHY_100             (1<<13)
-+  #define AUTO_NEGOTIATE_EN   (1<<12)
-+  #define PHY_PDOWN           (1<<11)
-+  #define PHY_ISOLATE         (1<<10)
-+  #define RENEGOTIATE         (1<<9)
-+  #define PHY_FD              (1<<8)
-+
-+#define PHY_STATUS_REG        1
-+  #define NWAY_COMPLETE       (1<<5)
-+  #define NWAY_CAPABLE        (1<<3)
-+  #define PHY_LINKED          (1<<2)
-+
-+#define NWAY_ADVERTIZE_REG    4
-+#define NWAY_REMADVERTISE_REG 5
-+  #define NWAY_FD100          (1<<8)
-+  #define NWAY_HD100          (1<<7)
-+  #define NWAY_FD10           (1<<6)
-+  #define NWAY_HD10           (1<<5)
-+  #define NWAY_SEL            (1<<0)
-+  #define NWAY_AUTO           (1<<0)
-+
-+
-+#endif _INC_MDIO_REG
-diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_build.c linux.dev/drivers/net/avalanche_cpmac/psp_config_build.c
---- linux.old/drivers/net/avalanche_cpmac/psp_config_build.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_build.c	2005-07-12 02:48:42.176573000 +0200
-@@ -0,0 +1,335 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    PSP Config Manager - Configuration Build Source
-+ ******************************************************************************
-+ * FILE NAME:       psp_config_build.c
-+ *
-+ * DESCRIPTION:     Configuration Build API Implementation
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - PSP TII  
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+#ifdef INCLUDE_FFS
-+#include "ffs.h"
-+#endif /* INCLUDE_FFS */
-+
-+#include "psp_config_mgr.h"
-+#include "psp_config_build.h"
-+#include "psp_config_util.h"
-+
-+#define MAX_DEVICE_NAME_LEN     16
-+#define MAX_DEVICE_STR_LEN      512
-+
-+#ifndef NULL
-+#define NULL (char *)0
-+#endif
-+
-+#include <asm/ar7/sangam.h>
-+#include <linux/slab.h>
-+#include <linux/config.h>
-+
-+
-+#define os_malloc(size) kmalloc(size, GFP_KERNEL)
-+
-+int psp_run_enumerator(void)
-+{
-+    return(0);
-+}
-+
-+#if defined (CONFIG_AVALANCHE_CPMAC_AUTO)
-+
-+static int auto_detect_cpmac_phy(void)
-+{
-+
-+#define SELECT_INT_PHY_MAC 0
-+#define SELECT_EXT_PHY_MAC 1
-+
-+    volatile unsigned long *reset_cntl = AVALANCHE_RESET_CONTROL_BASE, *mdio_cntl  = ((int)AVALANCHE_MDIO_BASE + 0x4);
-+    unsigned int j= 0, detected_phy_map = 0, auto_select = SELECT_INT_PHY_MAC;
-+                                                                                                                   
-+    *reset_cntl |= (1 << AVALANCHE_MDIO_RESET_BIT) | (1 << AVALANCHE_LOW_CPMAC_RESET_BIT) | (1 << AVALANCHE_HIGH_CPMAC_RESET_BIT) | (1 << AVALANCHE_LOW_EPHY_RESET_BIT);                                 
-+    *mdio_cntl   = (1 << 30) | ((CONFIG_AR7_SYS * 1000)/2200);                                              
-+                                                                                                                   
-+    for(j=0;j < 300000; j++) 
-+    { 
-+        if(j%100000) continue;
-+
-+        detected_phy_map = *(mdio_cntl + 1);
-+        if(detected_phy_map) 
-+        {
-+            detected_phy_map &= ~AVALANCHE_LOW_CPMAC_PHY_MASK;
-+                
-+            if(detected_phy_map && !(detected_phy_map & (detected_phy_map - 1)))
-+            {
-+                auto_select = SELECT_EXT_PHY_MAC;
-+                break;
-+            }
-+        } 
-+    }
-+
-+    return(auto_select);
-+
-+}
-+
-+#endif
-+
-+
-+#ifndef AVALANCHE_LOW_CPMAC_MDIX_MASK
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0
-+#endif
-+
-+void psp_load_default_static_cfg(void)
-+{
-+    char s2[100],  s3[100];
-+    char s4[2000], s6[2000];
-+    int threshold = 20;
-+    char *tx_threshold_ptr = prom_getenv("threshold");
-+    
-+    if(tx_threshold_ptr)
-+      threshold = simple_strtol(tx_threshold_ptr, (char **)NULL, 10);
-+
-+    /* Static configuration if options.conf not present */
-+    sprintf(s3,"cpmdio(id=mii, base=%u, reset_bit=%d)", AVALANCHE_MDIO_BASE, 22);
-+    sprintf(s2, "reset( id=[ResetRegister], base=%u)", AVALANCHE_RESET_CONTROL_BASE);
-+
-+    sprintf(s4, "cpmac(id=[cpmac], unit=0, base=%u, size=0x800, reset_bit=%d, PhyMask=%u, MdixMask=%u, MLink=0, int_line=%d, memory_offset=0, RX_CAF=1, RX_PASSCRC=0, RX_CEF=1, RX_BCAST=0, RX_BCASTCH=0, Ch0=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128], Ch1=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128], Ch2=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128])", AVALANCHE_LOW_CPMAC_BASE, AVALANCHE_LOW_CPMAC_RESET_BIT, AVALANCHE_LOW_CPMAC_PHY_MASK, AVALANCHE_LOW_CPMAC_MDIX_MASK, AVALANCHE_LOW_CPMAC_INT,threshold,threshold,threshold);
-+
-+    sprintf(s6, "cpmac(id=[cpmac], unit=1, base=%u, size=0x800, reset_bit=%d, PhyMask=%u, MLink=0, int_line=%d, memory_offset=0, RX_CAF=1, RX_PASSCRC=0, RX_CEF=1, RX_BCAST=0, RX_BCASTCH=0, Ch0=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128], Ch1=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128], Ch2=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128])", AVALANCHE_HIGH_CPMAC_BASE, AVALANCHE_HIGH_CPMAC_RESET_BIT, AVALANCHE_HIGH_CPMAC_PHY_MASK, AVALANCHE_HIGH_CPMAC_INT,threshold,threshold,threshold);
-+
-+    psp_config_add("reset", s2, psp_config_strlen(s2), en_compile);
-+
-+
-+#if defined (CONFIG_AVALANCHE_LOW_CPMAC)
-+
-+    psp_config_add("cpmdio", s3, psp_config_strlen(s3), en_compile);
-+    psp_config_add("cpmac", s4, psp_config_strlen(s4), en_compile);
-+
-+#endif
-+
-+
-+#if defined (CONFIG_AVALANCHE_HIGH_CPMAC)
-+
-+    psp_config_add("cpmdio", s3, psp_config_strlen(s3), en_compile);
-+    psp_config_add("cpmac", s6, psp_config_strlen(s6), en_compile);
-+
-+#endif
-+
-+#if defined (CONFIG_AVALANCHE_CPMAC_AUTO)
-+    { 
-+        char *phy_sel_ptr = prom_getenv("mac_phy_sel"); 
-+        int   phy_sel = SELECT_EXT_PHY_MAC;
-+        char *mac_port = prom_getenv("MAC_PORT"); /* Internal: 0, External: 1 */
-+
-+        if(phy_sel_ptr && (0 == strcmp(phy_sel_ptr, "int")))
-+        {
-+            phy_sel = SELECT_INT_PHY_MAC;
-+        }
-+
-+        //if(phy_sel == auto_detect_cpmac_phy())
-+        if(!mac_port || (0 != strcmp(mac_port, "0")))
-+        {
-+            printk("Using the MAC with external PHY\n");
-+            psp_config_add("cpmdio", s3, psp_config_strlen(s3), en_compile);
-+            psp_config_add("cpmac", s6, psp_config_strlen(s6), en_compile);
-+        }
-+        else
-+        {
-+            printk("Using the MAC with internal PHY\n");
-+            psp_config_add("cpmdio", s3, psp_config_strlen(s3), en_compile);
-+            psp_config_add("cpmac", s4, psp_config_strlen(s4), en_compile);
-+        }
-+    }
-+                      
-+#endif    
-+
-+}
-+
-+char* psp_conf_read_file(char *p_file_name)
-+{
-+#ifdef INCLUDE_FFS
-+    
-+    char        *p_file_data = NULL;
-+    unsigned int file_size;
-+    FFS_FILE    *p_file = NULL;
-+
-+    if(p_file_name == NULL)
-+    {
-+        return (NULL);
-+    }
-+
-+    if(!(p_file = ffs_fopen(p_file_name, "r"))) 
-+    {
-+        return(NULL);
-+    }
-+
-+    file_size = p_file->_AvailableBytes;
-+
-+    p_file_data = os_malloc(file_size + 1);
-+    
-+    if(ffs_fread(p_file_data, file_size, 1, p_file) == 0)
-+    {
-+        kfree(p_file_data);
-+        return(NULL);
-+    }
-+
-+    ffs_fclose(p_file);
-+   
-+    p_file_data[file_size] = '\0';
-+
-+    return(p_file_data);
-+    
-+#else /* NO FFS */
-+    return(NULL);
-+#endif /* INCLUDE_FFS */
-+}
-+
-+int psp_conf_get_line(char *p_in_data, char **next_line)
-+{
-+    char *p       = p_in_data;
-+
-+    while(*p && *p++ != '\n')
-+    {
-+
-+    } 
-+   
-+    *next_line = p;
-+
-+    return(p - 1 - p_in_data);
-+}
-+
-+
-+int psp_conf_is_data_line(char *line)
-+{
-+    int ret_val = 1;
-+
-+    if(*line == '\0' || *line == '\n' || *line == '#')
-+        ret_val = 0;
-+
-+    return(ret_val);
-+}
-+
-+int psp_conf_get_key_size(char *data)
-+{
-+    char *p = data;
-+
-+    while(*p && *p != '\n' && *p != '(' && *p != ' ')
-+        p++;
-+
-+    return(p - data);
-+}
-+
-+char* psp_conf_eat_white_spaces(char *p)
-+{
-+    while(*p && *p != '\n' && *p == ' ')
-+        p++;
-+
-+    return (p);
-+}
-+
-+int psp_build_from_opt_conf(void)
-+{
-+    char *data       = NULL;
-+    char *data_hold  = NULL;
-+    char *next_line  = NULL; 
-+    int  line_size   = 0;
-+
-+    if((data = psp_conf_read_file("/etc/options.conf")) == NULL)
-+        return(-1);
-+
-+    data_hold = data;
-+
-+    while((line_size=psp_conf_get_line(data, &next_line)) != -1)
-+    {
-+
-+        char *name = NULL;
-+        int  name_size; 
-+ 
-+    data = psp_conf_eat_white_spaces(data);
-+
-+        if(psp_conf_is_data_line(data))
-+        {
-+            data[line_size] = '\0';
-+ 
-+            name_size = psp_conf_get_key_size(data);
-+           
-+            if(name_size > 0) 
-+            {
-+                name = (char *) os_malloc(name_size + 1);
-+                if(name == NULL) break;
-+
-+                psp_config_memcpy(name, data, name_size);
-+                name[name_size] = '\0';
-+
-+                psp_config_add(name, data, line_size, en_opt_conf);
-+            
-+                kfree(name);
-+            }
-+
-+            data[line_size] = '\n';
-+        }
-+
-+        data = next_line;
-+    }
-+
-+    kfree(data_hold);
-+    return (0);
-+}
-+
-+
-+int psp_write_conf_file(char *p_write_file, char * dev_cfg_string)
-+{
-+#ifdef INCLUDE_FFS
-+    int bytes_written=0;
-+        FFS_FILE *file_ptr=NULL;    
-+ 
-+    /*
-+     * NOTE: In current implementation of FFS in ADAM2 if the file exists beforehand, it
-+     * can't be opened for write.
-+     */
-+        if(!(file_ptr=ffs_fopen(p_write_file, "w"))) {
-+        return(-1);
-+        }
-+    
-+    /* Write into the file "output.con" the character string */
-+    /* write a \n before a writing a line */
-+    if(!(bytes_written = ffs_fwrite("\n", 1, sizeof(char), file_ptr))) {
-+        return (-1);
-+    }
-+    
-+    if(!(bytes_written = ffs_fwrite(dev_cfg_string, psp_config_strlen(dev_cfg_string), sizeof(char), file_ptr))) {
-+        return (-1);        
-+    }
-+    ffs_fclose(file_ptr);
-+    return (bytes_written+1);
-+#else /* NO FFS */
-+    return(-1);
-+#endif /* INCLUDE_FFS */
-+}
-+
-+void build_psp_config(void)
-+{
-+
-+    /* initialize the repository. */
-+    psp_config_init();
-+    
-+#ifdef INCLUDE_FFS
-+    ffs_init();
-+#endif /* INCLUDE_FFS */
-+
-+    /* read the configuration from the options.conf to override default ones */
-+    psp_build_from_opt_conf();
-+
-+    /* read the configuration which were not over ridden in options.conf */
-+    psp_load_default_static_cfg();
-+
-+    /* let the vlynq be enumerated. Enumerator will add cfg info
-+       of the discovered device instances to the repository.*/
-+    psp_run_enumerator();
-+
-+    /* dump the repository*/
-+    dump_device_cfg_pool();
-+
-+}
-+
-diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_build.h linux.dev/drivers/net/avalanche_cpmac/psp_config_build.h
---- linux.old/drivers/net/avalanche_cpmac/psp_config_build.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_build.h	2005-07-12 02:48:42.176573000 +0200
-@@ -0,0 +1,138 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    PSP Config Manager - Configuration Build Header
-+ ******************************************************************************
-+ * FILE NAME:       psp_config_build.h
-+ *
-+ * DESCRIPTION:     Configuration Build API's.
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - PSP TII  
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+#ifndef __PSP_CONF_BUILD_H__
-+#define __PSP_CONF_BUILD_H__
-+
-+/*------------------------------------------------------------------------------
-+ * Name: psp_conf_read_file
-+ *
-+ * Parameters: 
-+ *         in: p_file_name - the name of the file to read from.
-+ *
-+ * Description:
-+ *     Reads the entire file in one shot. This function opens  the 
-+ *     file, determines the size of the data to be read, allocates 
-+ *     the required memory, NULL terminates the data and closes the
-+ *     file.
-+ *
-+ *     It is responsibily of the callee to free the memory after it is
-+ *     done with that data.
-+ *    
-+ *
-+ * Returns:
-+ *     A NULL pointer, if failed to read the data otherwise, a valid
-+ *     pointer referring to the data read from the file.
-+ *
-+ * Example: 
-+ *   
-+ *     psp_conf_read_file("/etc/options.conf");
-+ *---------------------------------------------------------------------------*/
-+ char *psp_conf_read_file(char *p_file_name);
-+
-+ /*----------------------------------------------------------------------------
-+  * Function : psp_conf_write_file
-+  *
-+  * Parameters:
-+  *         in: p_file_name - the file to which data is to be written.
-+  *         in: data        - the NULL terminated data string.
-+  *
-+  * Description:
-+  *     Write the indicated data into the file. This function opens the file,
-+  *     appends the data to end of the file, closes the file. 
-+  *
-+  * Returns:
-+  *
-+  *     The number of bytes on success. 
-+  *     0 on failure.
-+  *
-+  * Example:
-+  *
-+  *     psp_conf_write_file("/etc/outcon.conf", data);
-+  *--------------------------------------------------------------------------*/
-+ int   psp_conf_write_file(char *p_file_name, char *data);
-+
-+ /*----------------------------------------------------------------------------
-+  * Function: psp_conf_get_line
-+  *
-+  * Parameters:
-+  *         in: data      - the data from which the line is to identified.
-+  *        out: next_line - the pointer to start of the next line. 
-+  *
-+  * Description:
-+  *     Expects the data to be '\n' separated segments and data is NULL 
-+  *     terminated. Parses the given data for '\n' or '\0'. Provides a pointer
-+  *     to the start of next line in the next_line. 
-+  *
-+  * Returns:
-+  *     -1 on error.
-+  *      0 or more to indicate the number of bytes in the line starting at 
-+  *      data.
-+  *--------------------------------------------------------------------------*/
-+ int psp_get_conf_line(char *p_in_data, char **next_line);
-+
-+ /*----------------------------------------------------------------------------
-+  * Function: psp_conf_is_data_line
-+  *
-+  * Parameters:
-+  *         in: line - the array of bytes.
-+  *
-+  * Description:
-+  *     Tests the first byte in the array for '\0' or '\n' or '#'. Lines 
-+  *     starting with these characters are not considered data.
-+  *
-+  * Returns:
-+  *     1 if the line has data.
-+  *     0 otherwise.
-+  *
-+  *--------------------------------------------------------------------------*/
-+ int psp_conf_is_data_line(char *line);
-+
-+ /*----------------------------------------------------------------------------
-+  * Function: psp_conf_eat_white_spaces
-+  *
-+  * Parameters:
-+  *         in: line - the array of bytes.
-+  *
-+  * Description:
-+  *     Eats white spaces at the begining of the line while looking out for 
-+  *     '\0' or '\n' or ' '.
-+  * 
-+  * Returns:
-+  *     Pointer to the begining of the non white space character. 
-+  *     NULL if '\0' or '\n' is found.
-+  *
-+  *--------------------------------------------------------------------------*/
-+  char *psp_conf_eat_white_spaces(char *line);
-+
-+  /*---------------------------------------------------------------------------
-+   * Function: psp_conf_get_key_size
-+   *
-+   * Parameters:
-+   *         in: line - the array of bytes.
-+   *
-+   * Description:
-+   *     Identifies the size of the 'key' in array formatted as 
-+   *     key(id=[key1]....). This function also checks out for '\0' and '\n'.
-+   *
-+   * Returns:
-+   *     On success, The number of bytes that forms the key. 
-+   *     0 otherwise. 
-+   *     
-+   *-------------------------------------------------------------------------*/
-+  int psp_conf_get_key_size(char *line);
-+
-+
-+
-+#endif /* __PSP_CONF_BUILD_H__ */
-+
-diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_mgr.c linux.dev/drivers/net/avalanche_cpmac/psp_config_mgr.c
---- linux.old/drivers/net/avalanche_cpmac/psp_config_mgr.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_mgr.c	2005-07-12 02:48:42.177573000 +0200
-@@ -0,0 +1,464 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    PSP Config Manager Source
-+ ******************************************************************************
-+ * FILE NAME:       psp_config_mgr.c
-+ *
-+ * DESCRIPTION:
-+ *
-+ * Manages configuration information. The repository is managed on the basis of 
-+ * <key, info> pair. It is possible to have multiple occurrence of the same key. 
-+ * Multiple occurences of the same keys are referred to as 'instances'. 
-+ * 'instances' are assigned in the order of configuration arrival. The first 
-+ * config for a 'key' added to the repository would be treated as instance 0 and
-+ * next config to arrive for the same key would be treated as instance '1' and 
-+ * so on.
-+ * 
-+ * Info is retrieved from the repository based on the 'key' and 'instance' value.
-+ *
-+ * No assumption is made about the format of the information that is put in the 
-+ * repository. The only requirement is that 'key' should be NULL terminated 
-+ * string.
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - PSP TII  
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+//#include <stdio.h>
-+//#include <stdlib.h>
-+#include "psp_config_mgr.h"
-+#include "psp_config_util.h"
-+
-+#include <linux/slab.h>
-+
-+/*-----------------------------------------------------------
-+  Implemented elsewhere
-+ -----------------------------------------------------------*/
-+extern int sys_read_options_conf(void);
-+extern int sys_write_options_conf(char *cfg_info);
-+extern int sys_load_default_static_cfg(void);
-+extern int sys_run_enumerator(void);
-+
-+#define os_malloc(size) kmalloc(size, GFP_KERNEL)
-+
-+/*---------------------------------------------------------
-+ * Data structures.
-+ *--------------------------------------------------------*/
-+struct device_cfg_data;
-+
-+typedef struct device_instance_cfg_data
-+{
-+    struct device_instance_cfg_data       *next;
-+    char                                  locale[100];
-+    unsigned int                          data_size;
-+    char                                  *data;
-+
-+} DEV_INSTANCE_CFG_DATA_T;
-+
-+struct device_cfg_collection;
-+
-+typedef struct device_cfg_collection
-+{
-+    struct device_cfg_collection *next;
-+    char                         *device_name;
-+    CFG_TYPE_T                   cfg_type;
-+    int                          count;
-+    DEV_INSTANCE_CFG_DATA_T      *dev_inst_list_begin;
-+    DEV_INSTANCE_CFG_DATA_T      *dev_inst_list_end;
-+} DEVICE_CFG_T;
-+
-+
-+typedef struct device_cfg_list
-+{
-+    DEVICE_CFG_T   *device_cfg_begin;
-+    int            count;
-+} DEVICE_CFG_LIST_T;
-+
-+/*-----------------------------------------------------------------------------
-+ * Functions used locally with in the file.
-+ *---------------------------------------------------------------------------*/
-+static void p_init_device_cfg_list(void);
-+static int  p_add_instance_cfg_data(DEVICE_CFG_T            *p_dev_cfg,
-+                                    DEV_INSTANCE_CFG_DATA_T *p_dev_inst_data);
-+static DEVICE_CFG_T* p_create_dev_cfg(char *device_name);
-+static DEVICE_CFG_T* p_get_dev_cfg(char *device_name);
-+static int p_set_device_cfg_type(DEVICE_CFG_T     *p_dev_cfg,
-+                                 CFG_TYPE_T       cfg_type);
-+
-+/* PSP Config manager debug */                                 
-+#define PSP_CFG_MGR_DEBUG 0
-+
-+#define dbgPrint if (PSP_CFG_MGR_DEBUG) printk
-+
-+/*-----------------------------------------------------------------------------
-+ * The repository.
-+ *---------------------------------------------------------------------------*/
-+static DEVICE_CFG_LIST_T g_device_cfg_list;
-+
-+/*---------------------------------------------
-+ * Initialize the device collection pool.
-+ *--------------------------------------------*/ 
-+void p_init_device_cfg_list(void)
-+{
-+    g_device_cfg_list.count = 0;
-+    g_device_cfg_list.device_cfg_begin = NULL;
-+}
-+
-+/*----------------------------------------------------------------------
-+ * Add the device cfg into the device linked list.
-+ *---------------------------------------------------------------------*/
-+int p_add_dev_cfg_to_list(DEVICE_CFG_LIST_T *p_dev_list,
-+                          DEVICE_CFG_T      *p_dev_cfg)
-+{
-+    if(p_dev_list->count != 0)
-+        p_dev_cfg->next            = p_dev_list->device_cfg_begin;
-+
-+    p_dev_list->device_cfg_begin   = p_dev_cfg;
-+
-+    p_dev_list->count++;
-+
-+    return (0);
-+}
-+
-+/*------------------------------------------------------------------
-+ * Add the cfg data into the cfg data linked list of the collection.
-+ *------------------------------------------------------------------*/
-+int p_add_instance_cfg_data(DEVICE_CFG_T                 *p_dev_cfg,
-+                            DEV_INSTANCE_CFG_DATA_T      *p_dev_inst_data)
-+{
-+    if(p_dev_cfg->count == 0)
-+        p_dev_cfg->dev_inst_list_begin     = p_dev_inst_data;
-+    else
-+        p_dev_cfg->dev_inst_list_end->next = p_dev_inst_data;
-+        
-+    p_dev_cfg->dev_inst_list_end           = p_dev_inst_data;
-+
-+    p_dev_cfg->count++;
-+    
-+    return (0);
-+}
-+
-+/*-----------------------------------------------------------------------------
-+ * Create the device cfg.
-+ *---------------------------------------------------------------------------*/
-+DEVICE_CFG_T *p_create_dev_cfg(char *device_name)
-+{
-+    DEVICE_CFG_T *p_dev_cfg = NULL;
-+
-+    if((p_dev_cfg = os_malloc(sizeof(DEVICE_CFG_T))) == NULL)
-+    {
-+        dbgPrint("Failed to allocate memory for DEVICE_CFG_T.\n");
-+    }
-+    else if((p_dev_cfg->device_name = os_malloc(psp_config_strlen(device_name) + 1))==NULL)
-+    {
-+        dbgPrint("Failed to allocate memory for device name.\n");
-+    }
-+    else
-+    {
-+        psp_config_strcpy(p_dev_cfg->device_name, device_name);
-+        p_dev_cfg->cfg_type = en_raw;
-+        p_dev_cfg->count = 0;
-+        p_dev_cfg->dev_inst_list_begin = NULL;
-+        p_dev_cfg->dev_inst_list_end   = NULL;
-+        p_dev_cfg->next                = NULL;
-+    }
-+
-+    return(p_dev_cfg);
-+}
-+
-+/*------------------------------------------------------------------------------
-+ * Get the device cfg collection.
-+ *-----------------------------------------------------------------------------*/
-+DEVICE_CFG_T *p_get_dev_cfg(char *device_name)
-+{
-+    int count               = 0;
-+    DEVICE_CFG_T *p_dev_cfg = g_device_cfg_list.device_cfg_begin;
-+
-+    for(count=0; count < g_device_cfg_list.count; count++)
-+    {
-+        if(psp_config_strcmp(device_name, p_dev_cfg->device_name) == 0)
-+        {
-+            break;
-+        }
-+
-+        p_dev_cfg = p_dev_cfg->next;
-+    }
-+    
-+    return(p_dev_cfg); 
-+}
-+
-+/*-------------------------------------------------------------------------
-+ * Gets the name for the static cfg type. Utility function. Debug purposes.
-+ *-------------------------------------------------------------------------*/
-+char *p_get_cfg_type_name_for_en(CFG_TYPE_T  cfg_type)
-+{
-+    static char raw_str      [] = "still raw";
-+    static char compile_str  [] = "configured at compile time";
-+    static char optconf_str  [] = "configured by options.conf";
-+    static char vlynq_str    [] = "configured by VLYNQ";
-+    static char no_static_str[] = "no static configuration";
-+
-+    if(cfg_type == en_raw)
-+        return (raw_str);
-+    else if(cfg_type == en_compile)
-+        return (compile_str);
-+    else if(cfg_type == en_opt_conf)
-+        return (optconf_str);
-+    else if(cfg_type == en_vlynq)
-+        return (vlynq_str);
-+    else
-+        return (no_static_str);
-+
-+}
-+
-+/*-----------------------------------------------------------------------------
-+ * Sets the static cfg status of the device collection.
-+ *
-+ * If the collection is en_virgin then, the collection is assigned to cfg_type.
-+ * If the cfg_type is en_vlynq then, the old cfg_type is retained. 
-+ * en_compile and en_opt_conf are mutually exclusive. One of these can be 
-+ * accomodated.
-+ *
-+ *---------------------------------------------------------------------------*/
-+int p_set_device_cfg_type(DEVICE_CFG_T    *p_dev_cfg,
-+                          CFG_TYPE_T      cfg_type)
-+{
-+    int ret_val = 0;
-+
-+    if(p_dev_cfg->cfg_type == en_raw)
-+        p_dev_cfg->cfg_type = cfg_type;
-+    else if((cfg_type == en_vlynq) || (p_dev_cfg->cfg_type == cfg_type))
-+        ;
-+    else
-+    {
-+        dbgPrint("Device %s has been %s which overrides %s.\n",
-+                  p_dev_cfg->device_name,
-+                  p_get_cfg_type_name_for_en(p_dev_cfg->cfg_type),
-+                  p_get_cfg_type_name_for_en(cfg_type));
-+        ret_val = -1;
-+    }
-+
-+    return(ret_val);
-+}
-+
-+/*------------------------------------------------------------------------
-+ * Add the config str into the repository. The cfg type indicates
-+ * whether the device has been configured statically, from options.conf or
-+ * by vlynq enumeration.
-+ *------------------------------------------------------------------------*/
-+int psp_config_add(char *key, void *p_cfg_str, unsigned int cfg_len, 
-+                   CFG_TYPE_T cfg_type)
-+{
-+    int                     ret_val           = -1;
-+    DEVICE_CFG_T            *p_dev_cfg        = NULL;
-+    DEV_INSTANCE_CFG_DATA_T *p_dev_inst_data  = NULL;  
-+
-+    if(p_cfg_str == NULL || key == NULL)
-+    {
-+        dbgPrint("Null input pointer(s).\n");
-+    }
-+    /* check if there exist a dev_cfg for the given key, if not,
-+       then create one and add it to the device list. */
-+    else if(((p_dev_cfg = p_get_dev_cfg(key)) == NULL) &&
-+            (((p_dev_cfg = p_create_dev_cfg(key)) == NULL) ||
-+               p_add_dev_cfg_to_list(&g_device_cfg_list, p_dev_cfg) != 0))
-+    {
-+        dbgPrint("Failed to allocate mem or add dev cfg for %s.\n", key);
-+    }
-+    /* make sure that we can add this cfg type to the repository */
-+    else if(p_set_device_cfg_type(p_dev_cfg, cfg_type) == -1)
-+    {
-+        dbgPrint("Ignoring \"%s\" for device \"%s\".\n",
-+                  p_get_cfg_type_name_for_en(cfg_type),  
-+                  p_dev_cfg->device_name); 
-+    }
-+    else if((p_dev_inst_data = os_malloc(sizeof(DEV_INSTANCE_CFG_DATA_T)))== NULL)
-+    {
-+        dbgPrint("Failed to allocate memory for DEV_INSTANCE_CFG_DATA_T.\n");
-+    }
-+    else if((p_dev_inst_data->data = os_malloc(cfg_len) + 1) == NULL)
-+    {
-+        dbgPrint("Failed to allocate memory for the config data.\n");
-+    }
-+    else
-+    {
-+        p_dev_inst_data->next = NULL;
-+
-+        if(cfg_type == en_opt_conf || cfg_type == en_compile)
-+            psp_config_strcpy(p_dev_inst_data->locale, "dev on chip ");
-+        else if(cfg_type == en_vlynq)
-+            psp_config_strcpy(p_dev_inst_data->locale, "dev on vlynq");
-+        else 
-+            psp_config_strcpy(p_dev_inst_data->locale, "dev locale ?");
-+
-+        psp_config_memcpy(p_dev_inst_data->data, p_cfg_str, cfg_len);
-+        p_dev_inst_data->data_size = cfg_len;
-+        *(p_dev_inst_data->data + cfg_len) = '\0';
-+
-+        ret_val = p_add_instance_cfg_data(p_dev_cfg, p_dev_inst_data);
-+    } 
-+
-+    return(ret_val);
-+}
-+
-+/*-------------------------------------------------------------
-+ * Get the total number of device instances in the repository
-+ *------------------------------------------------------------*/
-+int psp_config_get_num_keys(void)
-+{
-+    return(g_device_cfg_list.count);
-+}
-+
-+
-+/*--------------------------------------------------------------------
-+ * Get the device configuration info from the repository.
-+ *-------------------------------------------------------------------*/
-+int psp_config_get(char *key, int instance, char **cfg_data_out)
-+{
-+    int ret_val             = -1;
-+    DEVICE_CFG_T *p_dev_cfg = NULL;
-+    *cfg_data_out           = NULL;
-+
-+    if(key == NULL && cfg_data_out == NULL)
-+    {
-+        dbgPrint("Key has a NULL value.\n");
-+    }
-+    else if((p_dev_cfg = p_get_dev_cfg(key)) == NULL)
-+    {
-+        dbgPrint("cfg information for %s could not be found.\n", key);
-+    }
-+    else if(p_dev_cfg->count)
-+    {
-+         DEV_INSTANCE_CFG_DATA_T *p_dev_inst_data = 
-+                                  p_dev_cfg->dev_inst_list_begin;
-+         int index = 0;
-+         for(index = 0; 
-+             index != instance && index < p_dev_cfg->count; 
-+             index++)
-+         {
-+             p_dev_inst_data = p_dev_inst_data->next;
-+         }
-+
-+         if(p_dev_inst_data != NULL && p_dev_inst_data->data != NULL)
-+         {
-+             *cfg_data_out = p_dev_inst_data->data;
-+             ret_val = p_dev_inst_data->data_size;
-+         }
-+    }
-+
-+    return (ret_val);
-+}
-+
-+/*----------------------------------------------------------------
-+ * Returns the number of instances found in the repository for the
-+ * specified key.
-+ *---------------------------------------------------------------*/
-+int psp_config_get_num_instances(char *key)
-+{
-+    int ret_val             = 0;
-+    DEVICE_CFG_T *p_dev_cfg = NULL;
-+
-+    if(key == NULL)
-+    {
-+        dbgPrint("Key has a NULL value.\n");
-+    }
-+    else if((p_dev_cfg = p_get_dev_cfg(key)) == NULL)
-+    {
-+        dbgPrint("cfg information for %s could not be found.\n", key);
-+    }
-+    else
-+    {
-+        ret_val = p_dev_cfg->count;
-+    }
-+    
-+    return (ret_val);
-+}
-+
-+/*------------------------------------------------------------------
-+ * Dump the configuration repository. 
-+ * Caution: DO NOT USE THIS FOR ANY NON NBU specified config format.
-+ *-----------------------------------------------------------------*/
-+void psp_config_print(char *key)
-+{
-+    DEVICE_CFG_T *p_dev_cfg = NULL;
-+
-+    if(key == NULL)
-+    {
-+        dbgPrint("Key has a NULL value.\n");
-+    }
-+    else if((p_dev_cfg = p_get_dev_cfg(key)) == NULL)
-+    {
-+        dbgPrint("cfg information for %s could not be found.\n", key);
-+    }
-+    else if(p_dev_cfg && p_dev_cfg->count)
-+    {
-+        DEV_INSTANCE_CFG_DATA_T   *p_dev_inst_data;
-+
-+        p_dev_inst_data = p_dev_cfg->dev_inst_list_begin;
-+
-+        do
-+        {
-+            dbgPrint("%s : %s\n", p_dev_inst_data->locale, 
-+                      p_dev_inst_data->data);
-+            p_dev_inst_data = p_dev_inst_data->next;
-+
-+        } while(p_dev_inst_data);
-+    }
-+    else
-+    {
-+        dbgPrint("Nothing was found for %s.\n", key);
-+    }
-+}
-+
-+void dump_device_cfg_pool(void)
-+{
-+    DEVICE_CFG_T *p_dev_cfg = g_device_cfg_list.device_cfg_begin;
-+    
-+    if(p_dev_cfg != NULL && g_device_cfg_list.count)
-+    {
-+        int index=0;
-+
-+        for(index=0; index < g_device_cfg_list.count; index++)
-+        {
-+            psp_config_print(p_dev_cfg->device_name);
-+            p_dev_cfg = p_dev_cfg->next;
-+        }
-+    }
-+    else
-+    {
-+        dbgPrint("repository is empty.\n");
-+    }
-+}
-+
-+void psp_config_init(void)
-+{
-+    p_init_device_cfg_list();
-+}
-+
-+void psp_config_cleanup()                                                       
-+{                                                                               
-+    int dev_count              = 0;                                             
-+    int inst_count             = 0;                                             
-+    DEVICE_CFG_T            *p = g_device_cfg_list.device_cfg_begin;            
-+    DEV_INSTANCE_CFG_DATA_T *q = NULL;                                          
-+                                                                                
-+    for(dev_count = 0; dev_count < g_device_cfg_list.count; dev_count++)        
-+    {                                                                           
-+        DEVICE_CFG_T            *p_temp = NULL;                                 
-+        if(p) q = p->dev_inst_list_begin;                                       
-+                                                                                
-+        for(inst_count = 0; inst_count < p->count && q != NULL; inst_count++)   
-+        {                                                                       
-+            DEV_INSTANCE_CFG_DATA_T *q_temp = q;                                
-+            q_temp = q->next;                                                   
-+            kfree(q->data);                                                     
-+            kfree(q);                                                           
-+            q = q_temp;                                                         
-+        }                                                                       
-+                                                                                
-+        p_temp = p->next;                                                       
-+        kfree(p);                                                               
-+        p = p_temp;                                                             
-+    }                                                                           
-+}                                                                               
-diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_mgr.h linux.dev/drivers/net/avalanche_cpmac/psp_config_mgr.h
---- linux.old/drivers/net/avalanche_cpmac/psp_config_mgr.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_mgr.h	2005-07-12 02:48:42.177573000 +0200
-@@ -0,0 +1,110 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    PSP Config Manager Header
-+ ******************************************************************************
-+ * FILE NAME:       psp_config_mgr.h
-+ *
-+ * DESCRIPTION:     Storing and retrieving the configuration based on key
-+ * A set of APIs to be used by one and sundry (including drivers and enumerator) to build
-+ * and read cfg information of the devices for an avalanche SOC.
-+ *
-+ * This set of APIs isolates the configuration management from the world and provides simple
-+ * access convinience.
-+ *
-+ * Device in this set refers to the peripherals that can be found on the SOC or on VLYNQ.
-+ * The configuration is stored in the form of string and drivers can use these APIs to get
-+ * a particular parameter value.
-+ *
-+ * The memory allocation for the pass back parameters is done by the caller.
-+ *
-+ * 0 is returned for SUCCESS or TRUE.
-+ *  -1 is returned for FAILURE or FALSE.
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - PSP TII  
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+ 
-+#ifndef __PSP_CONFIG_MGR_H__
-+#define __PSP_CONFIG_MGR_H__
-+
-+typedef enum cfg_type
-+{
-+    en_raw     = 0,
-+    en_compile,
-+    en_opt_conf,
-+    en_vlynq
-+} CFG_TYPE_T;
-+
-+/* Build psp configuration */
-+void build_psp_config(void);
-+ 
-+/********************************************************
-+ * Access Operations.
-+ ********************************************************/
-+
-+/*------------------------------------------------------------------------- 
-+   initializes the configuration repository. 
-+ -------------------------------------------------------------------------*/
-+void  psp_config_init(void);
-+
-+/*-------------------------------------------------------------------------- 
-+   Adds the configuration information into the repository. 'key' is required 
-+   to be NULL terminated string. 'cfg_ptr' points to the configuration data.
-+   'cfg_len' is the length of the data pointed to by 'cfg_ptr' in bytes. 
-+   'cfg_type' indicates the type of config information.
-+
-+   psp_config_mgr copies the 'cfg_len' bytes of data pointed to by 'cfg_ptr' 
-+   into its internal repository. 
-+
-+   Returns: 0 on success, -1 on failure.
-+  -------------------------------------------------------------------------*/
-+int   psp_config_add(char *key, void *cfg_ptr, 
-+                     unsigned int cfg_len, CFG_TYPE_T cfg_type);
-+
-+
-+/* --------------------------------------------------------------------------
-+   Passes back, in "*cfg_out_val" a pointer to the config data in the repository
-+   for the specified 'key' and 'instance'. It returns the size of the config
-+   info
-+
-+   psp_config_mgr passes back a pointer in '*cfg_out_val' which refers to 
-+   some location in its internal repository. It is strongly recommended that 
-+   if the user intends to modify the contents of the config info for reasons 
-+   whatsoever, then, user should allocate memory of size returned by this 
-+   routine and copy the contents from '*cfg_out_val'.
-+  
-+   Any, modification carried out on the repository would lead to un-expected
-+   results.
-+
-+   Returns: 0 or more for the size of config info, -1 on error.
-+  --------------------------------------------------------------------------*/ 
-+int   psp_config_get(char *key, int instance, char **cfg_out_val);
-+
-+
-+/*--------------------------------------------------------------------------
-+   Get the number of keys that have been added in the repository so far.
-+
-+   Returns: 0 or more for the num of keys, -1 on error.
-+  -------------------------------------------------------------------------*/
-+int   psp_config_get_num_keys(void);
-+
-+
-+/*--------------------------------------------------------------------------
-+   Get the number of instances that are present in the repository for the 
-+   given 'key'.
-+
-+   Returns: 0 or more for the num of instances, -1 on error.
-+  -------------------------------------------------------------------------*/  
-+int   psp_config_get_num_instances(char *key);
-+
-+
-+/*--------------------------------------------------------------------------
-+   Prints the config data for all instances associated with the specified 
-+   'key'.
-+  -------------------------------------------------------------------------*/
-+void  psp_config_print(char *key);
-+
-+void  dump_device_cfg_pool(void);
-+
-+#endif /* __PSP_CONFIG_MGR_H__ */
-diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_parse.c linux.dev/drivers/net/avalanche_cpmac/psp_config_parse.c
---- linux.old/drivers/net/avalanche_cpmac/psp_config_parse.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_parse.c	2005-07-12 02:48:42.178573000 +0200
-@@ -0,0 +1,362 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    PSP Config Manager - Parse API Source
-+ ******************************************************************************
-+ * FILE NAME:       psp_config_parse.c
-+ *
-+ * DESCRIPTION:     These APIs should be used only for scanvenging parameters which 
-+ *                  are stored in the following format.
-+ *
-+ *                  str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - PSP TII  
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+//#include <stdio.h>
-+#include <linux/stddef.h>
-+
-+/*--------------------------------------------------
-+ * MACROS.
-+ *-------------------------------------------------*/
-+#define my_isdigit(c) (c >= '0' && c <= '9')
-+#define my_isoct(c)   (c >= '0' && c <= '7')  
-+#define my_xtod(c)    ((c) <= '9' ? (c) - '0' : (c) - 'a' +  10)
-+#define my_ifupper(c)    (c >= 'A' && c <= 'F')
-+#define XTOD(c)       ((c) - 'A' + 10)
-+#define my_ishex(c)   ((c >= 'a' && c <='f') || (c >= 'A' && c<='F') || my_isdigit(c) ) 
-+
-+/*---------------------------------------------------
-+ * Local Functions.
-+ *--------------------------------------------------*/
-+static int p_get_substr_from_str(char *p_in_str, char begin_delimiter,
-+                                 char end_delimiter, int pair_flag,
-+                                 char **p_out_str);
-+static int p_get_u_int_from_str(char *p_in_str, char begin_delimiter,
-+                                char end_delimiter, unsigned long *out_val);
-+
-+/*---------------------------------------------------
-+ * Return pointer to first instance of the char.
-+ *--------------------------------------------------*/
-+static char* psp_config_strchr(char *str, char chr)
-+{
-+    while(*str)
-+    {
-+        if(*str == chr)
-+            break;
-+        str++;    
-+    }
-+    
-+    return((*str) ? str : NULL);
-+}
-+
-+/*------------------------------------------------------------------------
-+ * Convert the string upto delimiter to unsigned long.
-+ *-----------------------------------------------------------------------*/
-+unsigned long my_atoul(char *p, char end_delimiter, unsigned long *out_val)
-+{
-+    unsigned long n;
-+    int c;
-+ 
-+    /* check the for null input */    
-+    if (!p)
-+        return -1;
-+     
-+    c = *p;    
-+    
-+    /* pass through the leading spaces */
-+    if (!my_isdigit(c)) 
-+    {
-+        while ( c == ' ')
-+            c = *++p;
-+            
-+    }
-+    
-+    if (c == '0')
-+    {
-+        if(*(p + 1) == 'x' || *(p+1) == 'X' ) 
-+        {
-+            /* string is in hex format */
-+
-+            p += 2; 
-+            c = *p;
-+            
-+            if(my_ishex(c))
-+            {
-+               if(my_ifupper(c))
-+                   n = XTOD(c);
-+               else         
-+                       n = my_xtod(c);
-+            }
-+            else
-+                return -1; /* invalid hex string format */
-+                
-+            while ((c = *++p) && my_ishex(c)) 
-+            {
-+                n *= 16; 
-+                if(my_ifupper(c))
-+                   n += XTOD(c);
-+                else         
-+                       n += my_xtod(c);
-+            }
-+         }
-+        else
-+        {
-+            /* string is in octal format */
-+
-+            if( my_isoct(c) )
-+            n = c - '0';
-+            else
-+                return -1; /* invalid octal string format */
-+ 
-+            while ((c = *++p) && my_isoct(c)) 
-+            {
-+                n *= 8; 
-+                n += c - '0'; 
-+            }
-+        } 
-+         
-+    }      
-+    else 
-+    {
-+        /* string is in decimal format */
-+ 
-+        if( my_isdigit(c) )
-+            n = c - '0';
-+        else
-+            return -1; /* invalid decimal string format */
-+
-+        while ((c = *++p) && my_isdigit(c)) 
-+        {
-+            n *= 10; 
-+            n += c - '0'; 
-+        }
-+    }
-+   
-+    /* move through the trailing spaces */ 
-+    while(*p == ' ')
-+        p++;
-+        
-+    if(*p == end_delimiter)
-+       {
-+           *out_val = n;
-+           return 0;
-+       }   
-+        
-+    else
-+        return -1; /* invalid string format */
-+}
-+
-+/*---------------------------------------------------------------------------------
-+ * Gets the substring de-limited by the 'begin_delimiter' and 'end_delimiter'.
-+ * and returns the size of the substring. 
-+ *
-+ * Parses the NULL terminated p_in_str for a character array delimited by 
-+ * begin_delimiter and end_delimiter, passes back the pointer to the character 
-+ * array in ' *p_out_str '. The passed pointer ' *p_out_str ' should point to 
-+ * the location next (byte) to the begin_delimiter. The function routine returns 
-+ * the number of characters excluding the begin_delimiter and end_delimiter, 
-+ * found in the array delimited by the said delimiters.
-+ *
-+ * If the pair_flag is set to 1, then, number of begin_delimiter and end_delimiter
-+ * found in the parsing should match (equal) and this routine passes back the 
-+ * pointer to the character array, starting at a location next (byte) to the 
-+ * first begin_delimiter,  inclusive of all intermediate matching delimiter 
-+ * characters found between outer delimiters. If the pair flag is set and if 
-+ * begin_delimiter and end_delimiter happens to be same, then error (-1) is 
-+ * returned.
-+ * 
-+ * Return: 0 or more to indicate the size of the substring, -1 on error.
-+ *-------------------------------------------------------------------------------*/
-+int p_get_substr_from_str(char *p_in_str, char begin_delimiter, 
-+                          char end_delimiter, int pair_flag, 
-+                          char **p_out_str) 
-+{
-+    int cnt,pos;
-+
-+    if(pair_flag  && begin_delimiter == end_delimiter)
-+        return -1;
-+    
-+    if((p_in_str = psp_config_strchr(p_in_str, begin_delimiter)) == 0)
-+        return -1; /* no start delimiter found */
-+    
-+    p_in_str++;      
-+    *p_out_str = p_in_str;
-+     
-+    for(pos = 0,cnt =1; cnt && p_in_str[pos] ; pos++)
-+    {
-+        if(p_in_str[pos] == end_delimiter)
-+        {
-+            if(pair_flag == 0)
-+                return pos;
-+               
-+            cnt--;                  
-+        }             
-+        else if(p_in_str[pos] == begin_delimiter)
-+            cnt++;
-+        else 
-+            ; /* We do nothing */
-+      
-+    }
-+    
-+    if( cnt == 0)   
-+        return pos - 1;
-+    else
-+        return -1; /* no corresponding end delimiter found */
-+}
-+
-+/*--------------------------------------------------------------------------    
-+ * Parses the NULL terminated p_in_str for unsigned long value delimited by 
-+ * begin_delimiter and end_delimiter, passes back the found in ' *out_val '.  
-+ * The function routine returns 0 on success and returns -1 on failure. 
-+ * The first instance of the de-limiter should be accounted for the parsing.
-+ *
-+ * The base for unsigned value would 10, octal and hex. The value passed back 
-+ * would be of the base 10. Spaces at the begining of the byte array are valid  
-+ * and should be ingnored in the calculation of the value. Space character in 
-+ * the middle of the byte array or any character other than the valid ones 
-+ * (based on base type) should return error. The octal value begins with '0', 
-+ * the hex value begins with "0x" or "0X", the base value can begin with 
-+ * '1' to '9'.
-+ * 
-+ * Returns: 0 on success, -1 on failure.
-+ *-------------------------------------------------------------------------*/
-+int p_get_u_int_from_str(char *p_in_str, char begin_delimiter, 
-+                         char end_delimiter, unsigned long *out_val) 
-+{
-+    char *start;
-+    unsigned long num;
-+    
-+    num = p_get_substr_from_str(p_in_str, begin_delimiter, end_delimiter,
-+                                0, &start);
-+
-+    if(num == (unsigned long)-1)
-+        return -1;
-+    
-+    return my_atoul(start,end_delimiter,out_val);
-+}
-+
-+/*--------------------------------------------------------------------------
-+ * Finds the first occurrence of the substring p_find_str in the string
-+ * p_in_str. 
-+ *-------------------------------------------------------------------------*/
-+char *my_strstr(char *p_in_str, const char *p_find_str)
-+{
-+    char *p = (char *)p_find_str;
-+    char *ret = NULL;
-+
-+    while(*p_in_str)
-+    {
-+        if(!(*p))
-+            return (ret);
-+        else if(*p_in_str == *p)
-+        {
-+            if(!ret) ret = p_in_str;
-+            p++;
-+            p_in_str++;
-+        }
-+        else if(ret)
-+        {
-+            p = (char *)p_find_str;
-+            p_in_str = ret + 1;
-+            ret = NULL;
-+        }
-+        else
-+            p_in_str++;
-+    }
-+
-+    if(*p_in_str != *p) ret = NULL;
-+
-+    return (ret);
-+
-+}
-+
-+/*------------------------------------------------------------------------------
-+ * Gets the value of the config param in the unsigned int format. The value is 
-+ * stored in the following format in the string.
-+ * str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
-+ *-----------------------------------------------------------------------------*/
-+int psp_config_get_param_uint(char *p_in_str, const char *param, unsigned int *out_val)
-+{
-+    int   ret_val = -1;
-+    char *p_strstr;
-+
-+    if(!p_in_str || !param || !out_val) 
-+    {
-+        ;
-+    } 
-+    else if((p_strstr = my_strstr(p_in_str, param)) == NULL)
-+    {
-+        ;
-+    }
-+    else if(p_get_u_int_from_str(p_strstr, '=', ',', (unsigned long *)out_val) == 0)
-+    {
-+        ret_val = 0;
-+    }
-+    else if(p_get_u_int_from_str(p_strstr, '=', ']', (unsigned long*)out_val) == 0)
-+    {
-+        ret_val = 0;
-+    }
-+    else if(p_get_u_int_from_str(p_strstr, '=', ')', (unsigned long*)out_val) == 0)
-+    {
-+        ret_val = 0;
-+    }
-+    else
-+    {
-+        /* we failed */
-+    }
-+
-+    return (ret_val);
-+}
-+ 
-+/*------------------------------------------------------------------------------
-+ * Gets the value of the config param in the Non NULL terminated format. The value 
-+ * is stored in the following format in the string. 
-+ * str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
-+ *-----------------------------------------------------------------------------*/
-+int psp_config_get_param_string(char *p_in_str, const char *param, char **out_val)
-+{
-+    int ret_val = -1;
-+    char *p_strstr;
-+
-+    if(!p_in_str || !param || !(out_val))
-+        ;
-+    else if((p_strstr = my_strstr(p_in_str, param)) == NULL)
-+    {
-+        ;
-+    }
-+    else if((ret_val = p_get_substr_from_str(p_strstr, '[', ']', 1, out_val)) == -1)
-+    {
-+        ;
-+    }
-+    else
-+    {
-+        ; /* we got the value */
-+    }   
-+ 
-+    return (ret_val); 
-+} 
-+
-+#ifdef PSP_CONFIG_MGR_DEBUG_TEST
-+main()
-+{
-+    unsigned long num =999;
-+    int ret = 0;
-+    char *val1 = NULL;
-+    char val[30];
-+    char str1[] = "cpmac(id=[cpmac], k0=[a1=[a2=[test], a3=2], k1=100, k2=[k3=300, k4=200], k7=722)";
-+
-+    psp_config_get_param_uint(str1, "k7", &num);
-+    printf("%u.\n", num);    
-+    ret = psp_config_get_param_string(str1, "a1", &val1); 
-+    if(ret >= 0) { printf("%d.\n", ret); strncpy(val, val1, ret); val[ret] = '\0';}
-+    
-+    printf("val = \"%s\", and size = %d \n", val, ret);
-+
-+    if(val[ret]) ; else printf("jeee.\n");
-+}
-+#endif /* PSP_CONFIG_MGR_DEBUG_TEST */
-+
-+
-+
-diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_parse.h linux.dev/drivers/net/avalanche_cpmac/psp_config_parse.h
---- linux.old/drivers/net/avalanche_cpmac/psp_config_parse.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_parse.h	2005-07-12 02:48:42.178573000 +0200
-@@ -0,0 +1,32 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    PSP Config Manager - Parse API Header
-+ ******************************************************************************
-+ * FILE NAME:       psp_config_parse.h
-+ *
-+ * DESCRIPTION:     Parsing for params from string available in the NBU format.
-+ *                  These APIs should be used only for scanvenging parameters which 
-+ *                  are stored in the following format.
-+ *                  
-+ *                  str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - PSP TII  
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+#ifndef __PSP_CONFIG_PARSER_H__
-+#define __PSP_CONFIG_PARSER_H__
-+
-+/*------------------------------------------------------------------
-+ * These APIs should be used only for scanvenging parameters which 
-+ * are stored in the following format.
-+ *
-+ * str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
-+ *-----------------------------------------------------------------*/
-+int psp_config_get_param_uint(char *p_in_str, const char *param, 
-+                              unsigned int *out_val);
-+int psp_config_get_param_string(char *p_in_str, const char *param, 
-+                                char **out_val);
-+
-+#endif /* __PSP_CONFIG_PARSER_H__ */
-diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_util.c linux.dev/drivers/net/avalanche_cpmac/psp_config_util.c
---- linux.old/drivers/net/avalanche_cpmac/psp_config_util.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_util.c	2005-07-12 02:48:42.178573000 +0200
-@@ -0,0 +1,106 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    PSP Config Manager - Utilities API Source
-+ ******************************************************************************
-+ * FILE NAME:       psp_config_util.c
-+ *
-+ * DESCRIPTION:     These APIs provide the standard "C" string interfaces. 
-+ *                  Provided here to reduce dependencies on the standard libraries 
-+ *                  and for cases where psp_config would required to run before 
-+ *                  the whole system is loaded or outside the scope of the OS.
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - PSP TII  
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+
-+//#include <stdio.h>
-+#include "psp_config_util.h"
-+#include <linux/stddef.h>
-+
-+/*---------------------------------------------
-+ * strlen.
-+ *-------------------------------------------*/
-+int psp_config_strlen(char *p)
-+{
-+    char *p_orig = p;
-+    while(*p)
-+        p++;
-+    return(p - p_orig);
-+}
-+
-+/*--------------------------------------------
-+ * strcmp.
-+ *-------------------------------------------*/
-+int psp_config_strcmp(char *s1, char *s2)
-+{
-+    while(*s1 && *s2)
-+    {
-+        if(*s1 != *s2)
-+            break;
-+        s1++;
-+        s2++;
-+    }
-+
-+    return(*s1 - *s2);
-+}
-+
-+/*--------------------------------------------
-+ * strcpy.
-+ *------------------------------------------*/
-+char* psp_config_strcpy(char *dest, char *src)
-+{
-+    char *dest_orig = dest;
-+
-+    while(*src)
-+    {
-+        *dest++ = *src++;
-+    }
-+
-+    *dest = '\0';
-+
-+    return(dest_orig);
-+}
-+
-+/*----------------------------------------------
-+ * psp_config_memcpy.
-+ *--------------------------------------------*/
-+void* psp_config_memcpy(void* dest, void* src, unsigned int n)
-+{
-+    void *dest_orig = dest;
-+
-+    while(n)
-+    {
-+        *(char *)dest++ = *(char *)src++;
-+        n--;
-+    }
-+
-+    return (dest_orig);
-+}
-+
-+/*---------------------------------------------------
-+ * Return pointer to first instance of the char.
-+ *--------------------------------------------------*/
-+char* psp_config_strchr(char *str, char chr)
-+{
-+    while(*str)
-+    {
-+        if(*str == chr)
-+            break;
-+        str++;    
-+    }
-+    
-+    return((*str) ? str : NULL);
-+}
-+
-+#ifdef PSP_CONFIG_MGR_DEBUG_TEST
-+
-+int main( )
-+{
-+    char s[] = "hello             ";
-+    printf("%d.\n", psp_config_strlen("hello\n"));
-+    printf("%d.\n", psp_config_strcmp("hells", "hellq"));
-+    printf("%s %s.\n", psp_config_strcpy(s + 6, "test1"), s);
-+}
-+
-+#endif /* PSP_CONFIG_MGR_DEBUG_TEST */
-diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_util.h linux.dev/drivers/net/avalanche_cpmac/psp_config_util.h
---- linux.old/drivers/net/avalanche_cpmac/psp_config_util.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_util.h	2005-07-12 02:48:42.179573000 +0200
-@@ -0,0 +1,26 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    PSP Config Manager - Utilities API Header
-+ ******************************************************************************
-+ * FILE NAME:       psp_config_util.h
-+ *
-+ * DESCRIPTION:     These APIs provide the standard "C" string interfaces. 
-+ *                  Provided here to reduce dependencies on the standard libraries 
-+ *                  and for cases where psp_config would required to run before 
-+ *                  the whole system is loaded or outside the scope of the OS.
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - PSP TII  
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
-+ 
-+#ifndef __PSP_CONFIG_UTIL_H__
-+#define __PSP_CONFIG_UTIL_H__
-+
-+extern int   psp_config_strlen(char*);
-+extern int   psp_config_strcmp(char*, char*);
-+extern char* psp_config_strcpy(char*, char*);
-+extern void* psp_config_memcpy(void*, void*, unsigned int n);
-+extern char* psp_config_strchr(char*, char);
-+
-+#endif /* __PSP_CONFIG_UTIL_H__ */
-diff -urN linux.old/drivers/net/avalanche_cpmac/readme.txt linux.dev/drivers/net/avalanche_cpmac/readme.txt
---- linux.old/drivers/net/avalanche_cpmac/readme.txt	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/readme.txt	2005-07-12 02:48:42.179573000 +0200
-@@ -0,0 +1,545 @@
-+23 August 2004      CPMAC 1.7.8 (NSP Performance Team Release)
-+
-+CC Labels: REL_20040823_HALdallas_cpmac_01.07.08
-+
-+New features:  Key "MacAddr" can now be used to set the Mac Address after Open. 
-+
-+ unsigned char MacAddr[6];
-+
-+  // Set Mac Address to "00.B0.D0.10.80.C1"     
-+  MacAddr[0] = 0x00;
-+  MacAddr[1] = 0xB0;
-+  MacAddr[2] = 0xD0;
-+  MacAddr[3] = 0x10;
-+  MacAddr[4] = 0x80;
-+  MacAddr[5] = 0xC1;
-+      
-+  HalFunc->Control(HalDev, "MacAddr", hcSet, &MacAddr);      
-+
-+Bug fixes: in Send(), Threshold is not checked if Tx Ints are re-enabled.
-+
-+Modules affected:  hcpmac.c, hcpmac.h, cppi_cpmac.c
-+
-+22 June 2004          CPMAC 1.7.6 (NSP Performance Team Release)
-+
-+CC Labels: REL_20040622_HALdallas_cpmac_01.07.06
-+
-+New features:  Key "TxIntDisable" used to disable Tx Interrupts. If it is set, then Tx Interrupts will be processed on Send() controlled by Tx ServiceMax Setting. 
-+
-+ int On = 1;
-+ HalFunc->Control(HalDev, "TxIntDisable", "Set", &On);
-+
-+Bug fixes: NTR
-+
-+10 June 2004          CPMAC 1.7.5 (external release)
-+
-+CC Labels: REL_20040610_HALdallas_cpmac_01.07.05
-+
-+New features:  NTR
-+
-+Bug fixes: Fixed an issue with calculation for the multicast hash.
-+
-+27 May 2004          CPSAR 1.7.4, CPMAC 1.7.4 (external release)
-+
-+CC Labels: REL_20040527_HALdallas_cpsar_01.07.04
-+           REL_20040527_HALdallas_cpmac_01.07.04
-+
-+New features:  NTR
-+
-+Bug fixes: A flaw was fixed in the critical sectioning of the CPPI file, affecting both
-+           the MAC and the SAR releases.  This flaw was detected on Titan PSP 4.7 BFT2.
-+
-+05 May 2004          CPSAR 1.7.3, CPMAC 1.7.3 (external release)
-+
-+CC Labels: REL_20040505_HALdallas_cpsar_01.07.03
-+                REL_20040505_HALdallas_cpmac_01.07.03
-+
-+New features:  NTR
-+
-+Bug fixes: 1) Firmware has been updated to fix a problem with Host OAM mode operation.  
-+               2) Cache macros have been fixed.
-+
-+Notes:  This release contains all performance enhancements currently available for CPHAL 1.x.  
-+
-+19 April 2004          CPSAR 1.7.2, CPMAC 1.7.2 (external release)
-+
-+CC Labels: REL_20040419_HALdallas_cpsar_01.07.02
-+                REL_20040419_HALdallas_cpmac_01.07.02
-+
-+New features:  NTR
-+
-+Bug fixes: Fixes merge problem in 1.7.1.
-+
-+Notes:  This is a branch release which contains only a subset of the performance improvements.
-+            The remaining performance improvements are stiill being qualified at this time.
-+
-+1 April 2004          CPSAR 1.7.1, CPMAC 1.7.1 (external release)
-+
-+NOTICE: DO NOT USE 1.7.1.  It has a known problem (see 1.7.2 notes)
-+
-+CC Labels: REL_20040401_HALdallas_cpsar_01.07.01
-+                REL_20040401_HALdallas_cpmac_01.07.01
-+
-+New features:  Performance improvement in CPPI layer, affecting both CPSAR and CPMAC.  
-+
-+Bug fixes: NTR
-+
-+17 Februrary 2004    CPSAR 1.7.0 (external release)
-+
-+CC Labels: REL_20040217_HALdallas_cpsar_01.07.00
-+
-+New features:  Added support for "TxFlush" feature.  This allows the upper
-+               layer to flush all or part of a given Tx queue for a given
-+               channel.  This is to be used during call setup for a voice
-+               connection.
-+
-+30 January 2004      CPMAC 1.7.0 (external release)
-+
-+CC Labels: REL_20040130_HALdallas_cpmac_01.07.00
-+
-+Bug fixes:    CPMDIO - When in manual negotiate mode and linked, dropping link would move into NWAY state rather than manual state.
-+              CPMDIO - Extraneous debug message corrected
-+New features: CPMDIO - Support for AutoMdix usage added. 
-+
-+25 September 2003      CPSAR 1.6.6 (external release)
-+
-+CC Labels: REL_20030925_HALdallas_cpsar_01.06.06
-+
-+Bug fixes:   PDSP firmware has been updated to fix the OAM padding problem.  It previously
-+             wrote pad bytes into a reserved field of the OAM cell.  There is a small
-+             change to the CPSAR configuration code which corresponds to the PDSP spec
-+             change.
-+
-+New features: NTR
-+
-+09 September 2003      CPMAC 1.6.6 (external release)
-+
-+CC Labels: REL_20030909_HALdallas_cpmac_01.06.06
-+
-+Bug fixes:   CPMAC : When _CPMDIO_NOPHY is set, Cpmac COntrol is set to Full Duplex
-+             Bridge loopback test does not show a problem using 1.6.5 if packet rate is
-+             below 50,000 pbs. Now testing with a 100% send from Ixia.
-+
-+New features: NTR
-+
-+05 August 2003         CPHAL 1.6.5 (external release)
-+
-+CC Labels: REL_20030805_HALdallas_cpmac_01.06.05
-+
-+Bug fixes: NTR
-+
-+New features:  CPMAC : Added support for CPMAC modules that do not have a Phy connected.
-+               The CPMAC is informed of this by the MdioConnect option
-+               _CPMDIO_NOPHY. This is the only driver change needed to
-+               receive and transmit packets through the Marvel switch.
-+               Note  In this mode Link status will reported linked at 100/FD to
-+               PhyNum 0xFFFFFFFF.
-+
-+               ALL:  Cleaned up some Vlynq support logic.
-+
-+16 July 2003         CPSAR 1.6.3 (external release), no CPMAC release
-+
-+CC Labels: REL_20030716_HALdallas_cpsar_01.06.03
-+
-+Bug fixes: 1) Changed default value of CPCS_UU from 0x5aa5 to 0.  The old default value caused
-+              problems with Cisco routers.
-+
-+New features:  NTR
-+
-+Known issues not addressed in this release: NTR.
-+
-+01 July 2003         CPHAL 1.6.2 (external release)
-+
-+CC Labels: REL_20030701_HALdallas_cpmac_01.06.02
-+           REL_20030701_HALdallas_cpsar_01.06.02
-+
-+Bug fixes: 1) A previous firmware upgrade caused firmware OAM loopback cells to only work on every other
-+              command.  This has been fixed in the new firmware version (0.47).
-+           2) Problem with PTI values changing on transparent mode packets has been resolved.
-+           3) Previously, successful firmware OAM loopback cells waited 5 seconds before notifying the
-+              OS of success, rather that notifying immediately.  This has been resolved in firmware.
-+           4) PITS #148 (MAC and SAR), #149 (MAC) have been fixed.
-+
-+New features: 1) AAL5 HAL now capable of receiving unknown VCI/VPI cells on a single transparent channel.
-+                 See updated HAL document (AAL5 appendix) for implementation details.
-+              2) AAL5 HAL now allows OS to modify the OAM loopback timeout window.  Previously, failed
-+                 OAM loopback attempts timed out after a nominal 5 seconds (based on the SAR frequency
-+                 provided by the OS).  Now, the default is 5 seconds, but the OS may change the
-+                 value via halControl() to any integer number of milliseconds.  See updated HAL document
-+                 (AAL5 appendix) for implementation details.
-+              3) MAC (cpmdio): added loopback to Istate.  Used for debug.
-+
-+Known issues not addressed in this release: NTR.
-+
-+09 June 2003         CPSAR 1.6.1 (external release), CPMAC 1.6.1 (internal release - no functional change)
-+
-+Note: This is the same set of fixes being applied to 1.6.0 that were applied to 1.5.3.  The only difference
-+      between 1.6.1 and 1.5.4 is that 1.6.1 has the TurboDSL fix.
-+
-+CC Labels: REL_20030609_HALdallas_cpmac_01.06.01
-+           REL_20030609_HALdallas_cpsar_01.06.01
-+
-+Bug fixes: 1) Bug in OamLoopbackConfig fixed.
-+           2) New firmware version (.43) to fix Westell issue of dropped downstream packets in
-+              presence of OAM traffic when operating at or near line rate.
-+
-+New features: NTR.
-+
-+09 June 2003         CPSAR 1.5.4 (external release), CPMAC 1.5.4 (internal release - no functional change)
-+
-+Note:  This is a branch release from 1.5.3.  This does not contain anything from 1.6.0.  The CPMAC is
-+only being labeled to keep the release flow consistent.
-+
-+CC Labels: REL_20030609_HALdallas_cpmac_01.05.04
-+           REL_20030609_HALdallas_cpsar_01.05.04
-+
-+Bug fixes: 1) Bug in OamLoopbackConfig fixed.
-+           2) New firmware version (.43) to fix Westell issue of dropped downstream packets in
-+              presence of OAM traffic when operating at or near line rate.
-+
-+New features: NTR.
-+
-+30 May 2003         CPSAR 1.6.0 (external release), CPMAC 1.6.0 (internal release - no functional change)
-+
-+CC Labels: REL_20030530_HALdallas_cpmac_01.06.00
-+           REL_20030530_HALdallas_cpsar_01.06.00
-+
-+Bug fixes: 1) TurboDSL issue has been fixed with a software workaround in TxInt.  This workaround
-+              has been verified under Adam2 ONLY at this point.  Testing remains to be done on
-+              Linux and VxWorks.
-+
-+New features: NTR.
-+
-+Known issues not addressed in this release: NTR.
-+
-+30 May 2003         CPSAR 1.5.3 (external release), CPMAC 1.5.3 (internal release - no functional change)
-+
-+CC Labels: REL_20030530_HALdallas_cpmac_01.05.03
-+           REL_20030530_HALdallas_cpsar_01.05.03
-+
-+Bug fixes: NTR.
-+
-+New features: 1) AAL5 Send() has been modified to accept an ATM Header either in the first
-+                 fragment by itself, or in the first fragment directly in front of payload data.
-+                 The API() does not change.
-+              2) Documentation updates throughout, reflected in latest version of CPHAL user's
-+                 guide.
-+              3) AAL5 MaxFrags default value is now 46.  This is based upon the default AAL5
-+                 RxBufSize of 1518 (MaxFrags = (65568/1518) + 2).  IF THE OS CHOOSES A SMALLER
-+                 RxBufSize, IT MUST INCREASE THE VALUE OF MaxFrags ACCORDINGLY.  This is done
-+                 via halControl(), prior to Open().
-+
-+Known issues not addressed in this release:
-+              1) The Linux SAR driver is seeing an issue in which it cannot
-+                 reliably send traffic simultaneously on both the high and
-+                 low priority queues of a single AAL5 channel. (TurboDSL)
-+
-+23 May 2003         CPHAL 1.5.2 (external release)
-+
-+CC Labels: REL_20030523_HALdallas_cpmac_01.05.02
-+           REL_20030523_HALdallas_cpsar_01.05.02
-+
-+Bug fixes: 1) PITS #138: CPMAC flooding issue resolved.
-+           2) PITS #142: OS may now set "MaxFrags" via Control().  This controls the
-+              maximum number of fragments expected by the CPHAL.  The default value is 2 for
-+              CPMAC and 1028 for AAL5.  If the OS chooses a RxBufSize that will cause more
-+              fragments than the defaults, the OS must set "MaxFrags" to a correct value
-+              ((maximum packet length / RxBufSize) + 2).
-+           3) PITS #143: Fixed.
-+           4) Firmware OAM bug fixed. (new firmware release in this version)
-+
-+New features: NTR.
-+
-+Known issues not addressed in this release:
-+              1) The Linux SAR driver is seeing an issue in which it cannot
-+                 reliably send traffic simultaneously on both the high and
-+                 low priority queues of a single AAL5 channel. (TurboDSL)
-+
-+14 May 2003         CPHAL 1.5.1 (external release)
-+
-+CC Labels: REL_20030514_HALdallas_cpmac_01.05.01
-+           REL_20030514_HALdallas_cpsar_01.05.01
-+
-+Bug fixes:    1) PITS 132 - (CPMAC) Frames < 60 bytes and split into
-+                             multi-fragments.
-+              2) BCIL MR PSP00000353 - (CPMAC) PhyDev not free'd on halClose()
-+              3) PITS 113 - OsSetup bug in ChannelSetup fixed.
-+              4) Fixed AAL5 to check return values of InitTcb/InitRcb.
-+              5) Fixed Shutdown to properly free resources in the case of a Close
-+                 mode 1 followed by Shutdown.  Previously, buffer and descriptor
-+                 resources were left unfreed in this case.
-+
-+New features: 1) AAL5 Send() modified to be capable of accepting ATM header as first four
-+                 bytes of first fragment.  This allows the OS to "override" the
-+                 default ATM header which is constructed from preconfigured channel
-+                 parameters.
-+              2) AAL5 Receive() modified to be capable of passing the received ATM header (4 bytes, no HEC)
-+                 in the first fragment (by itself).  It also passes up the OS an indication
-+                 of what the received packet type was.  For Host OAM and transparent mode
-+                 packets, the ATM header is passed in this manner, and for other types of packets
-+                 (AAL5, NULL AAL) no ATM header is passed currently.
-+
-+Known issues not addressed in this release:
-+              1) The Linux SAR driver is seeing an issue in which it cannot
-+                 reliably send traffic simultaneously on both the high and
-+                 low priority queues of a single AAL5 channel.
-+
-+30 April 2003         CPHAL 1.5.0 (external release)
-+
-+CC Labels: REL_20030430_HALdallas_cpmac_01.05.00
-+           REL_20030430_HALdallas_cpsar_01.05.00
-+
-+Bug fixes:   1) Fixed AAL5 bug that rendered the low priority queue
-+                unusable.
-+             2) Fixed a bug in AAL5's Oam Rate calculations.
-+             3) Fixed use of "DeviceCPID" key in AAL5's halControl().
-+             4) Fixed RxReturn logic in HAL.  The HAL now can handle
-+                failing MallocRxBuffer calls when multiple fragments
-+                are being used.
-+
-+New features: 1) AAL5 Stats now available on a per queue basis.
-+              2) AAL5 adds two new keys to halControl() for "Set" actions:
-+                 RxVc_OamCh and RxVp_OamCh.
-+              3) Shutdown() has been modified for both AAL5 and CPMAC to
-+                 call Close() if the module is still in the Open state.
-+              4) CPMAC adds the following access keys to halControl():
-+                 hcPhyAccess,hcPhyNum,hcCpmacBase,hcSize,and hcCpmacSize.
-+              5) CPHAL no longer requests an extra 15 bytes on data buffer
-+                 mallocs.
-+
-+Known issues not addressed in this release:
-+              1) The Linux SAR driver is seeing an issue in which it cannot
-+                 reliably send traffic simultaneously on both the high and
-+                 low priority queues of a single AAL5 channel.
-+
-+21 April 2003         CPHAL 1.4.1 (external release)
-+
-+CC Labels: REL_20030421_HALdallas_cpmac_01.04.01
-+           REL_20030421_HALdallas_cpsar_01.04.01
-+
-+Bug fixes:   1) Fixed OAM logic in SAR portion of CPHAL.
-+
-+New features: 1) OAM loopback counters exposed through halControl.
-+              2) Host OAM Send() can now use a single channel to send
-+                 OAM cells on unlimited number of VP's/VC's.
-+              3) CPHAL now requests "SarFreq" through osControl.
-+              4) CPHAL now calculates all OAM function rates based on
-+                 "SarFreq"; function OamRateConfig removed for API.
-+              5) New OAM function OamLoopbackConfig, used for configuring
-+                 loopback functions in firmware OAM mode.
-+
-+Known issues not addressed in this release:  Bug fix 1) in release 1.4
-+             (see below) does not work properly for multiple fragments.
-+
-+10 April 2003         CPHAL 1.4 (external release)
-+
-+CC Labels: REL_20030410_HALdallas_cpmac_01.04.00
-+           REL_20030410_HALdallas_cpsar_01.04.00
-+
-+This release is for SAR and MAC.
-+
-+  Bug fixes: 1) Implemented logic in HAL to re-request buffer mallocs
-+                in the case of MallocRxBuffer failing.  The HAL now maintains
-+                a NeedsBuffer queue of all RCB's that are without buffers.
-+                On interrupts, or on Send(), the HAL checks to see if any
-+                RCB's are on the queue, and if so, calls MallocRxBuffer
-+                to attempt to get a new buffer and return the RCB to
-+                circulation.
-+             2) SAR now properly returns all error codes from halOpen and
-+                halChannelSetup.
-+
-+  New features: NTR
-+
-+  Known issues not addressed in this release: NTR
-+
-+08 April 2003         CPHAL 1.3.1 (internal release - SAR only)
-+
-+  CC Labels: REL_20030408_HALdallas_cpsar_01.03.01
-+
-+  This is a SAR only release.  The current CPMAC release is still 1.3.
-+
-+  Bug fixes: 1) PDSP State RAM / Scratchpad RAM is now completely cleared after reset.
-+                This resolves a stability issue.
-+
-+  New features: 1) OamMode is now a parameter in halControl().  Both "Set" and "Get"
-+                   actions are available.  The value may be "0" (Host OAM), or "1"
-+                   (Firmware OAM).
-+
-+  Known issues not addressed in this release:
-+             1) Appropriate action for HAL in the case of MallocRxBuffer failing.  We
-+                are investigating whether the HAL should implement a needs buffer
-+                queue.
-+
-+04 April 2003         CPHAL 1.3 (external release)
-+
-+  CC Labels: REL_20030404_HALdallas_cpmac_01.03.00
-+             REL_20030404_HALdallas_cpsar_01.03.00
-+             REL_20030404_HALdallas_cpaal5_01.03.00
-+             REL_20030404_HALdallas_cpaal2_01.03.00
-+
-+  This release requires no changes for the ethernet end driver.  The changes necessary
-+  for the sar driver (firmware file name changes) have already been implemented.
-+
-+  Bug fixes: 1) RxReturn now returns an error if MallocRxBuffer fails.  On RxReturn error, the driver should
-+                call RxReturn again at a later time (when the malloc may succeed) in order for the CPHAL
-+                to maintain a full complement of Rx buffers.  We recommend holding off making this driver
-+                change until we verify that this condition occurs.
-+
-+  New features: 1) Removed benign compiler warnings.
-+                2) PITS 122: http://www.nbu.sc.ti.com/cgi-bin/pits/redisplay_archive?product=cphal_dev&report=122
-+                3) Cpsar label (above) now is applied to everything
-+                   beneath /cpsar.
-+                4) PITS 14: http://www.nbu.sc.ti.com/cgi-bin/pits/redisplay_archive?product=cphal_dev&report=14
-+                   Transferred to MR PSP 00000089.
-+                5) PITS 120: http://www.nbu.sc.ti.com/cgi-bin/pits/redisplay_archive?product=cphal_dev&report=120
-+
-+  Known issues not addressed in this release:
-+             1) PITS 102 (as relating to OamMode configuration):
-+                http://www.nbu.sc.ti.com/cgi-bin/pits/redisplay_archive?product=cphal_dev&report=102
-+                Future release will make OamMode configurable
-+                through halControl(), not on per channel basis.
-+
-+20 March 2003         CPHAL 1.2.1 (internal release)
-+
-+  CC Labels: REL_20030320_HALdallas_cpmac_01.02.01
-+             REL_20030320_HALdallas_cpsar_01.02.01
-+             REL_20030320_HALdallas_cpaal5_01.02.01
-+             REL_20030320_HALdallas_cpaal2_01.02.01
-+
-+  Bug fixes: 1. Fixed modification of buffer pointer following
-+                MallocRxBuffer in cppi.c.
-+             2. Removed extra firmware files from /cpsar.
-+
-+  New features: NTR.
-+
-+  Known issues not addressed in this release: NTR.
-+
-+07 March 2003         CPHAL 1.2 (external release)
-+
-+  CPMAC/CPSAR feature complete release.  SAR added
-+  several features including full OAM support and various
-+  other features and bug fixes to address PITS 99-106, and
-+  114.  CPMAC cleaned up details raised by India PSP
-+  team.
-+
-+29 January 2003       CPHAL RC 3.01a (external release)
-+
-+  Corrects non-static functions to be static in cppi.c.
-+
-+09 Janurary 2003      CPHAL RC 3.01 (external release)
-+
-+  PITS 88: Fixed MDIO re-connection problem (hcpmac.c)
-+  PITS 90: Corrected Rx Buffer Pointer modification (cppi.c)
-+
-+  Corrected error in cpremap.c
-+
-+20 December 2002      CPHAL RC 3 (external release)
-+
-+  Statistics support via halControl().  See Appendix A of guide.
-+  Fixed errors in ChannelTeardown/ChannelSetup CPHAL logic.
-+  Added multicast support as requested.
-+  Several new OS string functions added to OS_FUNCTIONS.
-+  "DebugLevel" configuration parameter changed to "Debug".
-+  "Stats0" changed to "StatsDump" for CPMAC.
-+
-+13 December 2002      CPHAL RC 2.03 (internal release)
-+
-+  Performance improvements.
-+  More debug statements implemented (esp AAL5).
-+  Updated makefile with "make debug" option.
-+  Hbridge performance: [debug library] 15774 tps (53% line rate)
-+                   [non-debug library] 13700 tps (46%)
-+
-+10 December 2002      CPHAL Release Candidate 2.02 (internal release)
-+
-+ Much of the configuration code internal to CPMAC and AAL5 has been made common.
-+ [os]Receive API had been modified to remove OsReceiveInfo.  This information is now
-+   available as third member of the FRAGLIST structure, on a per buffer basis.
-+ Successfully tested multi-fragment support on CPMAC, using 32 byte buffers.
-+ Code is now Emerald compliant - all buffer descriptors now aligned to cache-line
-+   boundaries.
-+
-+2 December 2002      CPHAL Release Candidate 2.01
-+
-+ Updates to comments in hcpmac.c, cpmdio.c, hcpmac.h
-+ Nested comment in hcpmac.c in RC2 can cause compile errors.
-+
-+25 November 2002      CPHAL Release Candidate 2
-+
-+Project Items not completed for RC2
-+#6  Ship as Library -  Once under CC. Moved to RC3
-+#8  Under Clearcase -  Moved to RC3
-+#25 Emerald compliant - Moved to RC3
-+#26 Statistics support - Moved to RC3 (some support in RC2)
-+#36 Debug scheme implemented - Moved to RC3 (some support in RC2)
-+
-+8 November 2002       CPHAL Release Candidate 1
-+
-+Notes:
-+
-+Project Items not completed for RC1
-+
-+#8  Under Clearcase -  Clearcase server failure this week. Moved to RC2
-+#6  Ship as Library -  Once under CC. Moved to RC2
-+#13 Verify Datatypes. Moved to RC2
-+#14 Review APIs.  Moved to RC2
-+
-+APIs under review for RC2
-+
-+halIsr()
-+hslRxReturn()
-+halSend()
-+osSendComplete()
-+osReceive()
-+
-+
-+CPMAC Build Instructions
-+
-+Compile the file 'hcpmac.c'.
-+
-+
-+AAL5 Build Instructions
-+
-+The AAL5 build is composed of the source files aal5sar.c and cpsar.c.
-+Refer to the provided makefile for an example of compiling these files
-+into a library.
-+
-+Example CPHAL Code
-+
-+CPMAC:
-+
-+Example CPMAC code is provided in the file hbridge.c.
-+This program is provided simply as an example of using the CPHAL API.
-+It is not intended to be compiled and executed in your environment.
-+
-+AAL5:
-+
-+Example AAL5 code is provided in the file loopback.c.  This program
-+is provided simply as an example of using the CPHAL API.  It is not
-+intended to be compiled and executed in your environment.
-+
-+
-+Performance Baseline
-+
-+
-+Cpmac
-+
-+RC1: hbridge.bin, running with IXIA cpahl_1.cfg.
-+     This sends 64-byte packets from each Ixia port, with mac destination the other Ixia port.
-+     MIPS core 4Kc.
-+
-+RC2: hbridge.bin, running with IXIA cpahl_1.cfg.
-+     This sends 64-byte packets from each Ixia port, with mac destination the other Ixia port.
-+     MIPS core 4Ke.
-+     CPHAL now includes Emerald support, but this has been disabled by using 'cache -wt' to emulate 4Kc.
-+
-+RC3: hbridge.bin, running with IXIA cpahl_1.cfg.
-+     This sends 64-byte packets from each Ixia port, with mac destination the other Ixia port.
-+     MIPS core 4Ke.
-+     Running as Emerald processor.
-+
-+Release  Total Receive Rate    Throughput Setting
-+
-+RC1             11300                 38%
-+RC2              9524                 32%
-+RC3             15190                 51%
-diff -urN linux.old/drivers/net/Config.in linux.dev/drivers/net/Config.in
---- linux.old/drivers/net/Config.in	2005-07-12 03:20:45.726149872 +0200
-+++ linux.dev/drivers/net/Config.in	2005-07-12 02:48:42.180573000 +0200
-@@ -25,6 +25,24 @@
- comment 'Ethernet (10 or 100Mbit)'
- bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
- if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
-+   if [ "$CONFIG_MIPS_TITAN" = "y" -o "$CONFIG_AR7" = "y" ]; then
-+        tristate '  Texas Instruments Avalanche CPMAC support' CONFIG_MIPS_AVALANCHE_CPMAC	
-+   fi
-+   if [ "$CONFIG_MIPS_AVALANCHE_CPMAC" != "n" ]; then
-+     if [ "$CONFIG_AR7WRD" = "y" -o "$CONFIG_AR7VWI" = "y" -o "$CONFIG_AR7VW" = "y" ]; then
-+	 define_bool  CONFIG_MIPS_CPMAC_INIT_BUF_MALLOC y
-+         define_int CONFIG_MIPS_CPMAC_PORTS 1
-+	 if [ "$CONFIG_MIPS_AVALANCHE_MARVELL" = "y" ]; then
-+             define_bool CONFIG_AVALANCHE_LOW_CPMAC  n
-+             define_bool CONFIG_AVALANCHE_HIGH_CPMAC y
-+	 else
-+             define_bool CONFIG_AVALANCHE_CPMAC_AUTO y
-+             define_bool CONFIG_AVALANCHE_LOW_CPMAC n
-+             define_bool CONFIG_AVALANCHE_HIGH_CPMAC n
-+	fi
-+     fi
-+   fi
-+
-    if [ "$CONFIG_ARM" = "y" ]; then  
-       dep_bool '  ARM EBSA110 AM79C961A support' CONFIG_ARM_AM79C961A $CONFIG_ARCH_EBSA110
-       tristate '  Cirrus Logic CS8900A support' CONFIG_ARM_CIRRUS
-diff -urN linux.old/drivers/net/Makefile linux.dev/drivers/net/Makefile
---- linux.old/drivers/net/Makefile	2005-07-12 03:20:45.726149872 +0200
-+++ linux.dev/drivers/net/Makefile	2005-07-12 02:48:42.181573000 +0200
-@@ -56,6 +56,16 @@
- subdir-$(CONFIG_BONDING) += bonding
- 
- #
-+# Texas Instruments AVALANCHE CPMAC  driver
-+#
-+
-+subdir-$(CONFIG_MIPS_AVALANCHE_CPMAC) += avalanche_cpmac
-+#obj-$(CONFIG_MIPS_AVALANCHE_CPMAC) += avalanche_cpmac/avalanche_cpmac.o
-+ifeq ($(CONFIG_MIPS_AVALANCHE_CPMAC),y)
-+  obj-y += avalanche_cpmac/avalanche_cpmac.o
-+endif
-+
-+#
- # link order important here
- #
- obj-$(CONFIG_PLIP) += plip.o
---- linux.old/drivers/net/avalanche_cpmac/cpmac.c	2005-08-25 10:56:33.702931008 +0200
-+++ linux.dev/drivers/net/avalanche_cpmac/cpmac.c	2005-08-25 11:08:45.027451520 +0200
-@@ -2158,17 +2158,16 @@
-     CPMAC_PRIVATE_INFO_T *p_cpmac_priv  = p_dev->priv;
-     CPMAC_DRV_HAL_INFO_T *p_drv_hal     = p_cpmac_priv->drv_hal;
-     struct sk_buff       *p_skb         = fragList[0].OsInfo;
--    p_skb->len                          = fragList[0].len;    
- 
-     /* invalidate the cache. */
-     dma_cache_inv((unsigned long)p_skb->data, fragList[0].len);    
- #ifdef CPMAC_TEST
--    xdump(p_skb->data, p_skb->len, "recv");
-+    xdump(p_skb->data, fragList[0].len, "recv");
- #endif
- #ifdef CPMAC_8021Q_SUPPORT
-     /* 802.1q stuff, just does the basic checking here. */
-     if(!p_cpmac_priv->enable_802_1q      &&
--       p_skb->len > TCI_END_OFFSET       &&
-+       fragList[0].len > TCI_END_OFFSET       &&
-        IS_802_1Q_FRAME(p_skb->data + TPID_START_OFFSET))
-     {
-          goto cpmac_hal_recv_frame_mismatch;
diff --git a/openwrt/target/linux/ar7-2.4/patches/004-atm_driver.patch b/openwrt/target/linux/ar7-2.4/patches/004-atm_driver.patch
deleted file mode 100644
index f6a920853a..0000000000
--- a/openwrt/target/linux/ar7-2.4/patches/004-atm_driver.patch
+++ /dev/null
@@ -1,27232 +0,0 @@
-diff -urN linux.old/drivers/atm/Config.in linux.dev/drivers/atm/Config.in
---- linux.old/drivers/atm/Config.in	2005-08-22 23:18:37.773532032 +0200
-+++ linux.dev/drivers/atm/Config.in	2005-08-23 04:46:50.076846888 +0200
-@@ -99,4 +99,10 @@
-     bool 'Use S/UNI PHY driver' CONFIG_ATM_HE_USE_SUNI
-   fi
- fi
-+#
-+# Texas Instruments SANGAM ADSL/ATM support
-+#
-+if [ "$CONFIG_AR7" = "y" ]; then
-+     tristate 'Texas Instruments SANGAM ATM/ADSL support' CONFIG_MIPS_SANGAM_ATM
-+fi
- endmenu
-diff -urN linux.old/drivers/atm/Makefile linux.dev/drivers/atm/Makefile
---- linux.old/drivers/atm/Makefile	2005-08-22 23:18:37.773532032 +0200
-+++ linux.dev/drivers/atm/Makefile	2005-08-23 04:46:50.077846736 +0200
-@@ -14,6 +14,32 @@
- obj-$(CONFIG_ATM_NICSTAR) += nicstar.o
- obj-$(CONFIG_ATM_IDT77252) += idt77252.o
- 
-+ifeq ($(CONFIG_AR7),y)
-+
-+subdir-$(CONFIG_MIPS_SANGAM_ATM) += sangam_atm
-+
-+EXTRA_CFLAGS += -DEL -I$(TOPDIR)/drivers/atm/sangam_atm -DPOST_SILICON -DCOMMON_NSP -DCONFIG_LED_MODULE -DDEREGISTER_LED -DNO_ACT
-+#EXTRA_CFLAGS += -DEL -I$(TOPDIR)/drivers/atm/sangam_atm -DPOST_SILICON -DCOMMON_NSP
-+
-+ifeq ($(ANNEX),B)
-+EXTRA_CFLAGS += -DANNEX_B -DB
-+else
-+ifeq ($(ANNEX),C)
-+EXTRA_CFLAGS += -DANNEX_C -DC
-+else
-+EXTRA_CFLAGS += -DANNEX_A -DP
-+endif
-+endif
-+
-+list-multi	:= tiatm.o
-+tiatm-objs	:= sangam_atm/tn7atm.o sangam_atm/tn7dsl.o sangam_atm/tn7sar.o \
-+	sangam_atm/dsl_hal_api.o sangam_atm/dsl_hal_support.o sangam_atm/cpsar.o \
-+	sangam_atm/aal5sar.o
-+
-+obj-$(CONFIG_MIPS_SANGAM_ATM) += sangam_atm/tiatm.o
-+
-+endif
-+
- ifeq ($(CONFIG_ATM_NICSTAR_USE_SUNI),y)
-   obj-$(CONFIG_ATM_NICSTAR) += suni.o
- endif
-diff -urN linux.old/drivers/atm/sangam_atm/aal5sar.c linux.dev/drivers/atm/sangam_atm/aal5sar.c
---- linux.old/drivers/atm/sangam_atm/aal5sar.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/aal5sar.c	2005-08-23 04:46:50.080846280 +0200
-@@ -0,0 +1,2962 @@
-+
-+/**
-+ *  
-+ *  aal5sar.c
-+ *
-+ *  TNETDxxxx Software Support\n
-+ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  version
-+ *      28Feb02 Greg       1.00  Original Version created.\n 
-+ *      06Mar02 Greg       1.01  Documentation (Doxygen-style) enhanced
-+ *      06May02 Greg       1.02  AAL2 added
-+ *      06Jun02 Greg       1.03  Multiple API and bug fixes from emulation
-+ *      12Jul02 Greg       1.04  API Update
-+ */
-+
-+/**
-+@defgroup CPHAL_Functions CPHAL Functions
-+
-+These are the CPHAL Functions.
-+*/
-+
-+/**
-+@page CPHAL_Implementation_Details
-+
-+@section cphal_intro Introduction
-+
-+The CPHAL API described above is generally applicable to all modules.  Any
-+implementation differences will be described in the following module-specific
-+appendix sections.  
-+
-+Included for your reference is a diagram showing the internal architecture
-+of the CPHAL:
-+
-+@image html SangamSoftware.jpg "HAL Architecture"
-+@image latex SangamSoftware.jpg "HAL Architecture" height=2.8in
-+
-+*/
-+
-+/**
-+@defgroup AAL5_Functions Additional Functions for AAL5 Implementation
-+
-+These functions are used only by the AAL5 module.
-+*/
-+
-+/*
-+@defgroup CPMAC_Functions Additional Functions for CPMAC Implementation
-+
-+No additional functions currently defined.
-+*/
-+
-+/**
-+@page VDMA_Implementation_Details
-+
-+@section vdma_intro Introduction
-+
-+The VDMA-VT module facilitates efficient transfer of data (especially voice)
-+between two devices, as shown in the figure below.
-+
-+@image html vdma.jpg "VDMA System Block Diagram"
-+@image latex vdma.jpg "VDMA System Block Diagram" height=1in
-+
-+The VDMA-VT module supports two modes of operation: mirror mode and credit mode.
-+Mirror mode is intended for systems in which the remote device does not have a
-+VDMA-based module.  Credit mode is intended for highest performance when VDMA-based
-+modules exist on both ends of an interface.
-+
-+For more detailed information on the operation of the VDMA module, please
-+reference the VDMA Module Guide.
-+
-+@section vdma_channels VDMA Channels
-+
-+The VDMA-VT module is a single channel, single transmit queue device.  Therefore,
-+when using the CHANNEL_INFO structure, the correct value for @c Ch is always 0.
-+Correspondingly, the correct value for the @c Ch parameter in @c ChannelTeardown() is
-+always 0.  Further, when calling @c Send(), the driver should always supply the value
-+of 0 for both the @c Ch and @c Queue parameters.
-+
-+For the VDMA-VT, configuring the channel requires the configuration of either 2 FIFO 
-+elements (in credit mode) or 4 FIFO elements (in mirror mode).  For credit mode, the
-+driver must configure just the local Tx and Rx FIFOs.  For mirror mode, the driver must
-+configure the Tx and Rx FIFOs for both the remote and local ends of the interface.
-+
-+This channel configuration is accomplished through multiple calls to @c ChannelSetup().
-+Each call configures a single FIFO, according to the parameters in the CHANNEL_INFO
-+structure.  The members of VDMA-VT's CHANNEL_INFO structure are defined below.
-+
-+
-+- int RemFifoAddr; Address of remote FIFO (mirror mode only).  Set to 0 for credit mode.
-+- int FifoAddr;    Address of the local FIFO.  If 0, the CPHAL will allocate the FIFO.
-+- int FifoSize;    Size of the FIFO.
-+- int PollInt;     Polling interval for the FIFO.
-+- int Endianness;  Endianness of the FIFO.  If 1, big endian.  If 0, little endian.
-+- int RemAddr;     Used only in credit mode.  This is the base address of the remote
-+                   remote VDMA-based device (VDMA-VT or AAL2)
-+- int RemDevID;    Used only in credit mode.  Identifies the type of remote VDMA-based device.
-+                   0=VDMAVT, 1=AAL2 Ch0, 2=AAL2 Ch1, 3=AAL2 Ch2, 4= AAL2 Ch3.       
-+
-+For the VDMA-VT module, the driver must make all calls to @c ChannelSetup() prior to calling
-+@c Open().  This is because several of the channel specific parameters may not be changed
-+while the VDMA-VT module is operational.
-+
-+@section vdma_params VDMA Parameters
-+
-+Defined here are the set of parameters for the VDMA-VT module.  Default settings for
-+each parameter should be represented in the device configuration file (options.conf).
-+During @c Init(), the CPHAL will reference the device configuration file and load all
-+default settings.  The @c Control() interface gives the driver an opportunity to
-+modify any default settings before the module becomes operational during the @c Open()
-+call.
-+
-+@param NoTxIndication  If 1, the CPHAL will not call @c SendComplete(). 0 is default.
-+@param NoRxIndication  If 1, the CPHAL will not call @c Receive(). 0 is default.
-+@param RemoteCPU       If 1, the CPHAL will not directly manipulate data in FIFO's, leaving
-+                       that task for a remote CPU. 0 is default.
-+@param RxIntEn         If 1, enables Rx interrupts.  0 is default.
-+@param TxIntEn         If 1, enables Tx interrupts.  0 is default.
-+@param Mirror          If 1, enables mirror mode.  0 selects credit mode (default).
-+@param RxIntCtl        Valid only in mirror mode.  If 1, interrupts will occur when the Rx FIFO
-+                       RdIndex is updated.  If 0, interrupts occur when the Rx FIFO WrIndex
-+                       is updated.
-+@param TxIntCtl        Valid only in mirror mode.  If 1, interrupts will occur when the Rx FIFO
-+                       RdIndex is updated.  If 0, interrupts occur when the Rx FIFO WrIndex
-+                       is updated.
-+@param RBigEn          Remote big endian mode.  If 1, remote is big endian.
-+@param LBigEn          Local big endian mode.  If 1, local is big endian.
-+
-+@section vdma_polling Using VDMA-VT without interrupts
-+
-+If your system configuration does not utilize VDMA interrupts, the ability to process the
-+Tx and Rx FIFOs is supported.  To process the Tx FIFO, call @c CheckTx().  If the CPHAL is
-+able to process any complete data transmissions, it will call @c SendComplete() as usual.  
-+To process the Rx FIFO, call @c CheckRx().  If the CPHAL has received any data, it will
-+call @c Receive() to pass the driver the data.  Please reference @ref VDMA_Functions for more
-+information on these interfaces.
-+
-+@section vdma_details VDMA Implementation Details
-+
-+The following functions are not defined for use with VDMA:  @c Status(), @c Tick(), @c StatsGet(),
-+and @c StatsClear().
-+
-+*/
-+
-+/**
-+@page AAL5_Implementation_Details
-+
-+@section aal5_ver Version
-+
-+@copydoc AAL5_Version
-+
-+@section aal5_intro Introduction
-+
-+The AAL5 implementation will support 16 channels for transmit and 16 channels for
-+receive.  Each of the transmit channels may have up to two transmit queues
-+associated with it.  If two queues are used, Queue 0 is the high priority queue,
-+and Queue 1 is the low priority queue.
-+
-+@section aal5_params AAL5 Configuration Parameters
-+
-+AAL5 requires two device entries to be available in the configuration repository, named
-+@p "aal5" and @p "sar".  The @p aal5 device entry must contain @p base (base address)
-+and @p int_line (interrupt number). The @p sar device entry must have both @p base 
-+(base address) and @p reset_bit (reset bit).
-+
-+@par Device Level Configuration Parameters
-+
-+The following parameters are device-level parameters, which apply across all
-+channels.  The value for these parameters may be modified by changing the value in the
-+configuration repository.  
-+
-+- "UniNni":  
-+AAL5 network setting. 0 = UNI (default), 1 = NNI.
-+
-+@par Channel Configuration Parameters
-+
-+All AAL5 channel parameters may also be configured through the @c ChannelSetup() interface.
-+Following is the list of @p CHANNEL_INFO members that may be modified by the driver when 
-+calling @c ChannelSetup().  The driver may provide a value of 0xFFFFFFFF for any channel 
-+parameter to select a default value for the parameter.  The driver should at a minimum 
-+configure @p Vci and @p Vpi.  The usage of all parameters beginning with TxVc_,
-+TxVp_, RxVc_, RxVp_ is described in greater detail in the SAR Firmware Spec.
-+These parameters are mainly associated with QoS and OAM functionality.
-+
-+- "RxNumBuffers":    
-+The number of Rx buffer descriptors to allocate for Ch.  
-+- "RxBufSize":         
-+Size (in bytes) for each Rx buffer.
-+- "RxBufferOffset":   
-+Number of bytes to offset rx data from start of buffer (must be less than buffer size).
-+- "RxServiceMax":    
-+Maximum number of packets to service at one time.
-+- "TxNumBuffers":      
-+The number of Tx buffer descriptors to allocate for Ch.
-+- "TxNumQueues":        
-+Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. 
-+- "TxServiceMax":       
-+Maximum number of packets to service at one time. 
-+- "CpcsUU":         
-+The 2-byte CPCS UU and CPI information.
-+- "Gfc":    
-+Generic Flow Control.  Used in ATM header of Tx packets.
-+- "Clp":   
-+Cell Loss Priority.  Used in ATM header of Tx packets.
-+- "Pti":   
-+Payload Type Indication.  Used in ATM header of Tx packets.
-+- "DaMask":           
-+Specifies whether credit issuance is paused when Tx data not available.
-+- "Priority":   
-+Priority bin this channel will be scheduled within.
-+- "PktType":   
-+0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2.
-+- "Vci":                
-+Virtual Channel Identifier.
-+- "Vpi":                 
-+Virtual Path Identifier.
-+- "TxVc_AtmHeader":
-+In firmware OAM mode, this
-+is the ATM header to be appended to front of firmware generated VC OAM cells for
-+this channel.  Note: To generate host OAM cells, call @c Send() with 
-+the appropriate mode.
-+- "TxVc_CellRate":       
-+Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR).
-+- "TxVc_QosType":        
-+0=CBR,1=VBR,2=UBR,3=UBRmcr.
-+- "TxVc_Mbs":            
-+Min Burst Size in cells.
-+- "TxVc_Pcr":            
-+Peak Cell Rate for VBR in clock ticks between transmissions.
-+- "TxVc_OamTc":   
-+TC Path to transmit OAM cells for TX connections (0,1).
-+- "TxVc_VpOffset":   
-+Offset to the OAM VP state table for TX connections.  Channels with the same
-+VPI must have the same VpOffset value.  Channels with different VPIs
-+must have unique VpOffset values.
-+- "RxVc_OamCh":   
-+Channel to which to terminate received OAM cells to be forwarded to the Host
-+for either Host OAM mode, or when RxVc_OamToHost is enabled during Firmware
-+OAM mode.
-+- "RxVc_OamToHost":   
-+Indicates whether to pass received unmatched OAM loopback cells to the host;
-+0=do not pass, 1=pass.
-+- "RxVc_AtmHeader":   
-+ATM Header placed on firmware gen'd OAM cells for this channel on a Rx 
-+connection (must be big endian with 0 PTI).
-+- "RxVc_OamTc":   
-+TC Path to transmit OAM cells for RX connections (0,1).
-+- "RxVc_VpOffset":   
-+Offset to the OAM VP state table for RX connections.  Channels with the same
-+VPI must have the same VpOffset value.  Channels with different VPIs
-+must have unique VpOffset values.
-+- "TxVp_OamTc":   
-+TC Path to transmit OAM cells for TX VP connections (0,1).
-+- "TxVp_AtmHeader":   
-+ATM Header placed on firmware gen'd VP OAM cells for this channel on a Tx VP
-+connection (must be big endian with 0 VCI).
-+- "RxVp_OamCh":   
-+Channel to which to terminate received OAM cells to be forwarded to the Host
-+for either Host OAM mode, or when RxVc_OamToHost is enabled during Firmware
-+OAM mode.
-+- "RxVp_OamToHost":   
-+Indicates whether to pass received unmatched OAM loopback cells to the host;
-+0=do not pass, 1=pass.
-+- "RxVp_AtmHeader":
-+In firmware OAM mode, this
-+is the ATM header to be appended to front of firmware generated VP OAM cells for
-+this channel.  Note: To generate host OAM cells, call @c Send() with 
-+the appropriate mode.
-+- "RxVp_OamTc":   
-+TC Path to transmit OAM cells for RX VP connections (0,1).
-+- "RxVp_OamVcList":   
-+This 32-bit field is one-hot encoded to indicate all the VC channels that are
-+associated with this VP channel.  A value of 21 will indicate that VC
-+channels 0, 2, and 4 are associated with this VP channel.
-+- "FwdUnkVc":
-+Indicates whether or not to forward unknown VCI/VPI cells to the host.  This 
-+parameter only takes effect if the channel's PktType is Transparent(3).
-+1=forwarding enabled, 0=forwarding disabled.
-+
-+@section aal5_details API Implementation Details
-+
-+ATTENTION: Documentation given here supplements the documentation given in the general
-+CPHAL API section.  The following details are crucial to correct usage of the
-+AAL5 CPHAL.
-+
-+@par Receive()
-+The least significant byte of @p Mode contains the channel number.  Bit 31
-+indicates whether or not the ATM header is present in the first fragment of
-+the packet.  If bit 31 is set, the 4 byte ATM header (minus HEC) will be provided 
-+in the first fragment, with the payload beginning in the second fragment.  Currently,
-+this is the default behavior for host OAM and transparent mode packets.
-+Bits 17-16 indicate the packet type that is being received.  
-+Mode Parameter Breakdown: <BR>
-+- 31     ATM Header In First Fragment (1=true, 0=false) <BR>
-+- 30-18  Unused. <BR>
-+- 17-16  Pkt Type. <BR>
-+  -   0=AAL5 <BR>
-+  -   1=PTI Based Null AAL <BR>
-+  -   2=OAM <BR>
-+  -   3=Transparent <BR>
-+- 15-08  Unused. <BR>
-+- 07-00  Channel Number.
-+
-+@par Send()
-+The most significant 16 bits of the first fragment 'len' is used as the Offset 
-+to be added to the packet.  @c Send() will reserve this many bytes at the 
-+beginning of the transmit buffer prior to the first byte of valid data.
-+For the @p Mode parameter, Bit 31 must be set if the user has sent a packet with
-+the ATM Header (minus HEC) embedded in the first 4 bytes of the first fragment data buffer.
-+The OS has the option of using a 4 byte first fragment containing only ATM header,
-+or concatenating the ATM Header in front of the data payload.
-+If Bit 31 is set, the ATM Header in the buffer is preserved and sent with
-+each cell of the packet.  Otherwise, Send() will build the ATM header based on the
-+values of the Pti, Gfc, Clp, Vpi, and Vci parameters for the given channel.
-+Bits 17-16 are defined as the packet type.  Bits 15-08 may be used to specify the 
-+transmit queue to send the packet on.  Only values 0 (high priority) and 1 (low 
-+priority) are accepted.  Bits 07-00 should be used to indicate the channel number 
-+for the @c Send() operation.  Valid channel numbers are 0-15.
-+Mode Parameter Breakdown: <BR>
-+- 31     ATM Header In Packet (1=true, 0=false) <BR>
-+- 30-18  Unused. <BR>
-+- 17-16  Pkt Type. <BR>
-+  -   0=AAL5 <BR>
-+  -   1=PTI Based Null AAL <BR>
-+  -   2=OAM <BR>
-+  -   3=Transparent <BR>
-+- 15-08  Transmit Queue. <BR>
-+- 07-00  Channel Number.
-+  
-+@par ChannelSetup()
-+The AAL5 @c ChannelSetup() always configures both the Tx and Rx side of the channel
-+connection in the same call.
-+
-+@par ChannelTeardown()
-+Regardless of the channel teardown direction selected, the AAL5 CPHAL will always
-+teardown both the Tx and Rx side of the channel connection.
-+
-+@par TeardownComplete()
-+The value for the @p Direction parameter should be ignored for the AAL5 implementation,
-+since both directions (Tx and Rx) are always torndown in response to a @c ChannelTeardown()
-+command.
-+
-+@par Control() (HAL version)
-+Defined keys and actions.  Unless otherwise stated, the data type
-+for Value is pointer to unsigned integer.  The list is broken into
-+three groups, one group which can be used anytime, one group that should
-+be used before halOpen(), and one group which can only be used after 
-+halOpen() (but before halClose()).  For channelized parameters, replace
-+'Ch' with the integer number of a channel (ex. "Gfc.4" can be used to set
-+Gfc for channel 4).
-+
-+MAY USE ANYTIME AFTER INIT (after halInit() is called):
-+
-+- "Gfc.Ch".  The OS may "Set" this value.  Changing this value causes
-+the Gfc in each Tx ATM header for this channel to take on the new Gfc value.
-+
-+- "Clp.Ch".  The OS may "Set" this value.  Changing this value causes
-+the Clp in each Tx ATM header for this channel to take on the new Clp value.
-+
-+- "Pti.Ch".  The OS may "Set" this value.  Changing this value causes
-+the Pti in each Tx ATM header for this channel to take on the new Pti value.
-+
-+- "CpcsUU.Ch".  The OS may "Set" this value.  Changing this value causes
-+the CpcsUU in each Tx ATM header for this channel to take on the new CpcsUU value.
-+
-+- "OamMode".  Specifies if host or firmware is performing OAM functions; 0 = Host OAM, 
-+1 = Firmware OAM.  When set, all SAR channels will be configured for
-+the selection, including AAL2 channels.
-+
-+- "OamLbTimeout".  Specifies the firmware OAM loopback timeout, in milliseconds.
-+
-+- "DeviceCPID".  The OS may "Set" this value.  This is the OAM connection 
-+point identifier.  The OS should provide a pointer to an array of 4 32-bit
-+integers.  Each word must be configured in big endian format.
-+
-+- "FwdUnkVc.Ch".  Indicates whether or not to forward unknown VCI/VPI cells to the host.
-+This parameter only takes effect if the channel's PktType is Transparent(3).
-+1=forwarding enabled, 0=forwarding disabled.
-+
-+MAY USE ONLY BEFORE HAL IS OPEN (before halOpen() call):
-+- "StrictPriority". The OS may "Set" this value.  Setting to 1 causes
-+a different interrupt processing routine to be used, which gives strict
-+priority to channels with lower numbers (channel 0 has highest priority).
-+The default handler gives equal priority to all channels.
-+
-+- "MaxFrags".  The OS may "Set" or "Get" this value.  This defines the maximum
-+number of fragments that can be received by the AAL5 Rx port.  The default
-+value for AAL5 is 46.  This provides enough space to receive a maximum
-+length AAL5 packet (65,568 bytes) with the default buffer size of 1518 bytes, and
-+any amount of RxBufferOffset.  If the buffer size is configured to be smaller,
-+the OS *MUST* modify this parameter according to the following formula: 
-+((System Max AAL5 packet length)/(RxBufSize)) + 2.  (The extra two fragments in
-+the formula allow for RxBufferOffset and one fragment for the ATM Header, used
-+when receiving host OAM or transparent mode packets)
-+
-+MAY USE ONLY AFTER HAL IS 'OPEN' (after halOpen() call):
-+- "Stats;Level;Ch;Queue".  The OS may "Get" Stats groups with this key, where 
-+'Level' is an integer from 0-4, Ch is an integer from 0-15, and Queue is
-+an integer from 0-1.  Note that Ch is not required for Level 4 stats, and Queue
-+is not required for Level 0, 3, and 4.  The statistics functionality and return 
-+value is described in the appendix entitled "Configuration and Control".
-+
-+- "TxVc_CellRate.Ch".  The OS may "Set" this value.  Can be used to modify
-+CellRate for a channel on the fly.
-+
-+- "TxVc_Mbs.Ch".  The OS may "Set" this value.  Can be used to modify
-+Mbs for a channel on the fly.
-+
-+- "TxVc_Pcr.Ch".  The OS may "Set" this value.  Can be used to modify
-+Pcr for a channel on the fly.
-+
-+- "PdspEnable".  The OS may "Set" this value.  Value 0 disables the PDSP.
-+Value 1 enables to PDSP.
-+
-+- "DeviceCPID".  The OS may "Set" this value.  The Value should be an array
-+of 4 32-bit integers that comprise the CPID.  
-+
-+- "RxVc_RDICount.Ch".  The OS may "Get" or "Set" this value.  Get returns
-+the current RDI count for the VC channel.  Set clears the counter, and the Value
-+is ignored.
-+
-+- "RxVp_RDICount.Ch".  The OS may "Get" or "Set" this value.  Get returns
-+the current RDI count for the VP channel.  Set clears the counter, and the Value
-+is ignored.
-+
-+- "RxVc_AISseg.Ch". The OS may "Get" this value.  This is an indication of
-+AIS segment error for the VC channel.
-+
-+- "RxVp_AISseg.Ch". The OS may "Get" this value.  This is an indication of
-+AIS segment error for the VP channel.
-+
-+- "RxVc_AISetoe.Ch". The OS may "Get" this value.  This is an indication of
-+AIS end-to-end error for the VC channel.
-+
-+- "RxVp_AISetoe.Ch". The OS may "Get" this value.  This is an indication of
-+AIS end-to-end error for the VP channel.
-+
-+- "RxVc_OamCh.Ch". The OS may "Set" this value.  Channel to which to terminate 
-+received OAM cells to be forwarded to the Host for either Host OAM mode, or when 
-+RxVc_OamToHost is enabled during Firmware OAM mode.
-+
-+- "RxVp_OamCh.Ch". The OS may "Set" this value.  Channel to which to terminate 
-+received OAM cells to be forwarded to the Host for either Host OAM mode, or when 
-+RxVp_OamToHost is enabled during Firmware OAM mode.
-+
-+- "F4_LB_Counter". The OS may "Get" this value.  This is a count of the number
-+  of near-end F4 loopbacks performed by the PDSP in firmware OAM mode.
-+
-+- "F5_LB_Counter". The OS may "Get" this value.  This is a count of the number
-+  of near-end F5 loopbacks performed by the PDSP in firmware OAM mode.
-+
-+- "TxVc_AtmHeader.Ch". The OS may "Set" this value.  In firmware OAM mode, this
-+is the ATM header to be appended to front of firmware generated VC OAM cells for
-+this channel.  In host OAM mode, this is used as the ATM header to be appended
-+to front of host generated VC OAM cells for this channel.  It must be configured
-+as big endian with PTI=0.  Note: To generate host OAM cells, call @c Send() with 
-+the appropriate mode.
-+
-+- "TxVp_AtmHeader.Ch". The OS may "Set" this value.  In firmware OAM mode, this
-+is the ATM header to be appended to front of firmware generated VP OAM cells for
-+this channel.  In host OAM mode, this is used as the ATM header to be appended
-+to front of host generated VP OAM cells for this channel.  It must be configured
-+as big endian with VCI=0.  Note: To generate host OAM cells, call @c Send() with 
-+the appropriate mode.
-+
-+- "PdspEnable".  The OS may "Set" this value. Controls whether or not the PDSP is 
-+allowed to fetch new instructions.  The PDSP is enabled by the CPHAL during Open(), 
-+and disabled during Close().  0 = disabled, 1 = enabled.
-+
-+@par Control() (OS version)
-+Defined keys and actions:
-+
-+- "Firmware".  The CPHAL will perform a "Get" action for the key "Firmware".  A pointer
-+to a pointer is passed in @p Value.  The OS must modify the referenced pointer to point
-+to the firmware.
-+
-+- "FirmwareSize".  The CPHAL will perform a "Get" action for the key "FirmwareSize".
-+The OS must place the firmware size in the memory pointed at by @p Value.
-+
-+- "OamLbResult".  When a channel that is in firmware OAM mode is commanded to perform
-+a loopback function, the result of the loopback generates an interrupt that is handled
-+by the OS like any other interrupt.  The CPHAL, upon servicing the interrupt, will call
-+osControl with this key, and an action of "Set".  The @p Value parameter will be a 
-+pointer to the integer result.  1 = pass, 0 = fail.
-+
-+- "SarFreq". The CPHAL will perform a "Get" action for this key.  The OS should place
-+the SAR frequency (in Hz) in the memory pointed at by @p Value.
-+
-+@section aal5_stats AAL5 Specific Statistics
-+
-+Statistics level '0' contains all AAL5 specific statistics.  The following values will
-+be obtained when requesting stats level 0:
-+
-+- "Crc Errors".  Number of CRC errors reported by SAR hardware.  Incremented for received
-+packets that contain CRC errors.  
-+
-+- "Len Errors".  Number of length errors reported by SAR hardware.  Incremented for received
-+packets that are in excess of 1366 cells.
-+
-+- "Abort Errors".  Number of abort errors reported by SAR hardware.
-+
-+- "Starv Errors".  Number of buffer starvation errors reported by SAR hardware.  Incremented
-+when a part or all of a buffer cannot be received due to lack of RX buffer resources.  The SAR
-+drops all cells associated with the packet for each buffer starvation error that occurs.
-+
-+*/ 
-+
-+/* register files */
-+#include "cp_sar_reg.h"  
-+
-+#define _CPHAL_AAL5
-+#define _CPHAL
-+#define _CPPI_TEST /** @todo remove for release */
-+#define __CPHAL_CPPI_OFFSET /* support use of offset */
-+
-+/*  OS Data Structure definitions  */
-+
-+typedef void OS_PRIVATE;
-+typedef void OS_DEVICE;
-+typedef void OS_SENDINFO;
-+typedef void OS_RECEIVEINFO;
-+typedef void OS_SETUP;
-+
-+/*  CPHAL Data Structure definitions  */
-+
-+typedef struct hal_device  HAL_DEVICE;
-+typedef struct hal_private HAL_PRIVATE;
-+typedef struct hal_private HAL_RECEIVEINFO;
-+
-+/* include CPHAL header files here */
-+#include "cpcommon_cpaal5.h"
-+#include "cpswhal_cpaal5.h"
-+#include "aal5sar.h"
-+#include "cpcommon_cpaal5.c"
-+    
-+#define CR_SERVICE            (170-1)
-+#define UTOPIA_PAUSE_REG      (*(volatile bit32u *)0xa4000000)
-+
-+/* 
-+these masks are for the mode parameter used in halSend/OsReceive
-+(may move these elsewhere)
-+*/
-+#define CH_MASK            0xff
-+#define PRI_MASK           0x10000 
-+  
-+/* Rcb/Tcb Constants */
-+#define CB_SOF_BIT         (1<<31)
-+#define CB_EOF_BIT         (1<<30)
-+#define CB_SOF_AND_EOF_BIT (CB_SOF_BIT|CB_EOF_BIT)
-+#define CB_OWNERSHIP_BIT   (1<<29)
-+#define CB_EOQ_BIT         (1<<28)
-+#define CB_SIZE_MASK       0x0000ffff
-+#define CB_OFFSET_MASK     0xffff0000
-+#define RCB_ERRORS_MASK    0x03fe0000
-+#define RX_ERROR_MASK      0x000f0000
-+#define CRC_ERROR_MASK     0x00010000
-+#define LENGTH_ERROR_MASK  0x00020000
-+#define ABORT_ERROR_MASK   0x00040000
-+#define STARV_ERROR_MASK   0x00080000
-+#define TEARDOWN_VAL       0xfffffffc
-+
-+/* interrupt vector masks */
-+#define TXH_PEND        0x01000000
-+#define TXL_PEND        0x02000000
-+#define RX_PEND         0x04000000
-+#define STS_PEND        0x08000000
-+#define AAL2_PEND       0x10000000
-+#define INT_PENDING     (TXH_PEND | TXL_PEND | RX_PEND | STS_PEND | AAL2_PEND)
-+#define STS_PEND_INVEC  0x0001F000
-+#define RX_PEND_INVEC   0x00000F00
-+#define TXL_PEND_INVEC  0x000000F0
-+#define TXH_PEND_INVEC  0x0000000F
-+#define AIS_SEG_MASK    0x1        /* +01.02.00 */
-+#define AIS_SEG_SHIFT   0          /* +01.02.00 */
-+#define AIS_ETOE_MASK   0x20000    /* +01.02.00 */
-+#define AIS_ETOE_SHIFT  17         /* +01.02.00 */
-+#define RDI_CNT_MASK    0xffff0000 /* +01.02.00 */
-+#define RDI_CNT_SHIFT   16         /* +01.02.00 */
-+
-+/*
-+ *  This function takes a vpi/vci pair and computes the 4 byte atm header
-+ *  (minus the HEC).
-+ *
-+ *  @param  vpi  Virtual Path Identifier.
-+ *  @param  vci  Virtual Channel Identifier.
-+ *
-+ *  @return  A properly formatted ATM header, without the HEC.
-+ */ 
-+static int atmheader(int gfc, int vpi, int vci, int pti, int clp)
-+  {
-+   int itmp;
-+
-+   itmp=0;
-+  
-+   /* UNI Mode uses the GFC field */
-+   itmp |= ((gfc & 0xF) << 28);
-+   itmp |= ((vpi & 0xFF) << 20);
-+    
-+   /* if NNI Mode, no gfc and larger VPI */
-+   /*itmp |= ((vpi & 0xFFF) << 20);*/
-+
-+   itmp|=((vci & 0xFFFF) << 4);
-+   itmp|=((pti & 0x7) << 1);
-+   itmp|=(clp & 0x1);
-+   return(itmp);
-+  }
-+
-+#include "cppi_cpaal5.c"
-+
-+/*
-+ *   Re-entrancy Issues
-+ *   In order to ensure successful re-entrancy certain sections of the
-+ *   CPHAL code will be bracketed as Critical.
-+ *   The OS will provide the function Os.CriticalSection(BOOL), which
-+ *   will be passed a TRUE to enter the Critical Section and FALSE to exit.
-+ */
-+
-+/*
-+ *  @ingroup CPHAL_Functions
-+ *  Clears the statistics information.
-+ *
-+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *
-+ *  @return 0 OK, Non-zero not OK
-+ */
-+static int StatsClear(HAL_DEVICE *HalDev)
-+  {
-+   int i;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]StatsClear(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* clear stats */
-+   for (i=0; i<NUM_AAL5_CHAN; i++)
-+     {
-+      HalDev->Stats.CrcErrors[i]=0;
-+      HalDev->Stats.LenErrors[i]=0;
-+      HalDev->Stats.DmaLenErrors[i]=0;
-+      HalDev->Stats.AbortErrors[i]=0;
-+      HalDev->Stats.StarvErrors[i]=0;
-+      HalDev->Stats.TxMisQCnt[i][0]=0;
-+      HalDev->Stats.TxMisQCnt[i][1]=0;
-+      HalDev->Stats.RxMisQCnt[i]=0;
-+      HalDev->Stats.RxEOQCnt[i]=0;
-+      HalDev->Stats.TxEOQCnt[i][0]=0;
-+      HalDev->Stats.TxEOQCnt[i][1]=0;
-+      HalDev->Stats.RxPacketsServiced[i]=0;
-+      HalDev->Stats.TxPacketsServiced[i][0]=0;
-+      HalDev->Stats.TxPacketsServiced[i][1]=0;
-+      HalDev->Stats.TxMaxServiced[i][0]=0;
-+      HalDev->Stats.TxMaxServiced[i][1]=0;
-+     }
-+   HalDev->Stats.RxTotal=0;
-+   HalDev->Stats.TxTotal=0;
-+   HalDev->Stats.RxMaxServiced=0;
-+   return (EC_NO_ERRORS);
-+  }
-+
-+/*
-+ *  Returns statistics information.
-+ *
-+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())  
-+ *
-+ *  @return 0
-+ */
-+/*
-+static STAT_INFO* StatsGet(HAL_DEVICE *HalDev)
-+  {
-+   STAT_INFO* MyStats = &HalDev->Stats;
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]StatsGet(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   dbgPrintf("HAL Stats:\n");
-+   DispStat(HalDev, "Rx Total",MyStats->RxTotal);
-+   DispStat(HalDev, "Tx Total",MyStats->TxTotal);
-+   DispStat(HalDev, "Rx Peak",MyStats->RxMaxServiced);
-+   DispStat(HalDev, "TxH Peak",MyStats->TxMaxServiced[0][0]);
-+   DispStat(HalDev, "TxL Peak",MyStats->TxMaxServiced[0][1]);
-+   DispChStat(HalDev, "CrcErr",&MyStats->CrcErrors[0],1);
-+   DispChStat(HalDev, "LenErr",&MyStats->LenErrors[0],1);
-+   DispChStat(HalDev, "DmaLenErr",&MyStats->DmaLenErrors[0],1);
-+   DispChStat(HalDev, "AbortErr",&MyStats->AbortErrors[0],1);
-+   DispChStat(HalDev, "StarvErr",&MyStats->StarvErrors[0],1);
-+   DispChStat(HalDev, "TxH MisQ Cnt",&MyStats->TxMisQCnt[0][0],2);
-+   DispChStat(HalDev, "TxL MisQ Cnt",&MyStats->TxMisQCnt[0][1],2);
-+   DispChStat(HalDev, "Rx MisQ Cnt",&MyStats->RxMisQCnt[0],1);
-+   DispChStat(HalDev, "Rx EOQ Cnt",&MyStats->RxEOQCnt[0],1); 
-+   DispChStat(HalDev, "TxH EOQ Cnt",&MyStats->TxEOQCnt[0][0],2);
-+   DispChStat(HalDev, "TxL EOQ Cnt",&MyStats->TxEOQCnt[0][1],2);
-+   DispChStat(HalDev, "Rx Pkts",&MyStats->RxPacketsServiced[0],1);
-+   DispChStat(HalDev, "TxH Pkts",&MyStats->TxPacketsServiced[0][0],2);
-+   DispChStat(HalDev, "TxL Pkts",&MyStats->TxPacketsServiced[0][1],2); 
-+
-+   return (&HalDev->Stats);
-+  }
-+*/
-+
-+#ifdef __CPHAL_DEBUG
-+void dbgChannelConfigDump(HAL_DEVICE *HalDev, int Ch)
-+  {
-+   CHANNEL_INFO *HalCh = &HalDev->ChData[Ch];
-+   dbgPrintf("  [aal5 Inst %d, Ch %d] Config Dump:\n", HalDev->Inst, Ch);
-+   dbgPrintf("    TxNumBuffers  :%08d, TxNumQueues :%08d\n", 
-+             HalCh->TxNumBuffers, HalCh->TxNumQueues);
-+   dbgPrintf("    RxNumBuffers  :%08d, RxBufSize   :%08d\n", 
-+             HalCh->RxNumBuffers, HalCh->RxBufSize);
-+   dbgPrintf("    TxServiceMax  :%08d, RxServiceMax:%08d\n", 
-+             HalCh->TxServiceMax, HalCh->RxServiceMax);
-+   dbgPrintf("    RxBufferOffset:%08d, DaMask      :%08d\n", 
-+             HalCh->RxBufferOffset, HalCh->DaMask);
-+   dbgPrintf("    CpcsUU        :%08d, Gfc         :%08d\n", 
-+             HalCh->CpcsUU, HalCh->Gfc);
-+   dbgPrintf("    Clp           :%08d, Pti         :%08d\n", 
-+             HalCh->Clp, HalCh->Pti);
-+   dbgPrintf("    Priority      :%08d, PktType     :%08d\n", 
-+             HalCh->Priority, HalCh->PktType);
-+   dbgPrintf("    Vci           :%08d, Vpi         :%08d\n", 
-+             HalCh->Vci, HalCh->Vpi);
-+   dbgPrintf("    TxVc_CellRate :%08d, TxVc_QosType:%08d\n", 
-+             HalCh->TxVc_CellRate, HalCh->TxVc_QosType);
-+   dbgPrintf("    TxVc_Mbs      :%08d, TxVc_Pcr    :%08d\n", 
-+             HalCh->TxVc_Mbs, HalCh->TxVc_Pcr);
-+   dbgPrintf("    TxVc_AtmHeader:%08d\n", 
-+             HalCh->TxVc_AtmHeader);
-+   osfuncSioFlush();
-+  }
-+#endif
-+
-+/*
-+ * Retrieves channel parameters from configuration file.  Any parameters
-+ * which are not found are ignored, and the HAL default value will apply,
-+ * unless a new value is given through the channel structure in the call
-+ * to ChannelSetup.
-+ */
-+static int ChannelConfigGet(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
-+  {
-+   unsigned int Ret, Value, Ch = HalChn->Channel;
-+   OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+   void *ChInfo;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]ChannelConfigGet(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev,
-+                (bit32u)HalChn);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   Ret=OsFunc->DeviceFindParmValue(HalDev->DeviceInfo, channel_names[Ch], &ChInfo);
-+   if (Ret) return (EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_CH_INFO_NOT_FOUND);
-+
-+   /* i don't care if a value is not found because they are optional */
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxNumBuffers", &Value);
-+   if (!Ret) HalDev->ChData[Ch].TxNumBuffers = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxNumQueues", &Value);
-+   if (!Ret) HalDev->ChData[Ch].TxNumQueues = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxServiceMax", &Value);
-+   if (!Ret) HalDev->ChData[Ch].TxServiceMax = Value;
-+   
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxNumBuffers", &Value);
-+   if (!Ret) HalDev->ChData[Ch].RxNumBuffers = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxBufferOffset", &Value);
-+   if (!Ret) HalDev->ChData[Ch].RxBufferOffset = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxBufSize", &Value);
-+   if (!Ret) HalDev->ChData[Ch].RxBufSize = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxServiceMax", &Value);
-+   if (!Ret) HalDev->ChData[Ch].RxServiceMax = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "CpcsUU", &Value);
-+   if (!Ret) HalDev->ChData[Ch].CpcsUU = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "Gfc", &Value);
-+   if (!Ret) HalDev->ChData[Ch].Gfc = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "Clp", &Value);
-+   if (!Ret) HalDev->ChData[Ch].Clp = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "Pti", &Value);
-+   if (!Ret) HalDev->ChData[Ch].Pti = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "DaMask", &Value);
-+   if (!Ret) HalDev->ChData[Ch].DaMask = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "Priority", &Value);
-+   if (!Ret) HalDev->ChData[Ch].Priority = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "PktType", &Value);
-+   if (!Ret) HalDev->ChData[Ch].PktType = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "Vci", &Value);
-+   if (!Ret) HalDev->ChData[Ch].Vci = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "Vpi", &Value);
-+   if (!Ret) HalDev->ChData[Ch].Vpi = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_CellRate", &Value);
-+   if (!Ret) HalDev->ChData[Ch].TxVc_CellRate = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_QosType", &Value);
-+   if (!Ret) HalDev->ChData[Ch].TxVc_QosType = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_Mbs", &Value);
-+   if (!Ret) HalDev->ChData[Ch].TxVc_Mbs = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_Pcr", &Value);
-+   if (!Ret) HalDev->ChData[Ch].TxVc_Pcr = Value;
-+
-+   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_AtmHeader", &Value);
-+   if (!Ret) HalDev->ChData[Ch].TxVc_AtmHeader = Value;
-+
-+   return (EC_NO_ERRORS);
-+  }
-+
-+/*
-+ * Sets up channel parameters in the hardware, and initializes the CPPI
-+ * TX and RX buffer descriptors and buffers.
-+ */
-+static int ChannelConfigApply(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
-+  {
-+   int j, Ch = HalChn->Channel;
-+   volatile bit32u *pTmp;
-+   int Ret; /* +GSG 030410 */
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]ChannelConfigApply(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev,
-+                (bit32u)HalChn);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   if ((HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE) || (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE))
-+     {
-+      return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_CH_ALREADY_OPEN);
-+     }
-+
-+   HalDev->InRxInt[Ch]=FALSE;
-+  
-+   /* Initialize Queue Data */
-+   HalDev->RxActQueueHead[Ch]=0;
-+   HalDev->RxActQueueCount[Ch]=0;
-+   HalDev->TxActQueueHead[Ch][0]=0;
-+   HalDev->TxActQueueHead[Ch][1]=0;
-+   HalDev->TxActQueueCount[Ch][0]=0;
-+   HalDev->TxActQueueCount[Ch][1]=0;
-+   HalDev->RxActive[Ch] = FALSE;
-+   HalDev->TxActive[Ch][0] = FALSE;
-+   HalDev->TxActive[Ch][1] = FALSE;
-+
-+   /* Clear Rx State RAM */
-+   pTmp = pRX_DMA_STATE_WORD_0(HalDev->dev_base) + (Ch*64);
-+   for (j=0; j<NUM_RX_STATE_WORDS; j++)
-+     *pTmp++ = 0; 
-+     
-+   /* Check that Rx DMA State RAM was cleared */
-+   pTmp -= NUM_RX_STATE_WORDS;
-+   for (j=0; j<NUM_RX_STATE_WORDS; j++)
-+     {
-+      if (*pTmp++ != 0)
-+        {
-+         return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_RX_STATE_RAM_NOT_CLEARED);
-+        }    
-+     } 
-+ 
-+   /* Clear Tx State RAM */
-+   pTmp = pTX_DMA_STATE_WORD_0(HalDev->dev_base) + (Ch*64);
-+   for (j=0; j<NUM_TX_STATE_WORDS; j++)
-+     *pTmp++ = 0; 
-+     
-+   /* Check that Tx DMA State RAM was cleared */
-+   pTmp -= NUM_TX_STATE_WORDS;
-+   for (j=0; j<NUM_TX_STATE_WORDS; j++)
-+     {
-+      if (*pTmp++ != 0)
-+        {
-+         return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_TX_STATE_RAM_NOT_CLEARED);
-+        }
-+     }
-+  
-+   /* Initialize Tx State RAM (Nothing to do) */
-+   
-+   /* Initialize Rx State RAM */
-+   /* Configure the Rx buffer offset */
-+   pTmp=(pRX_DMA_STATE_WORD_0(HalDev->dev_base) + (Ch*64));
-+   *pTmp |= (HalDev->ChData[Ch].RxBufferOffset & 0xFF);
-+
-+   /* Initialize buffer memory for the channel */
-+   Ret = InitTcb(HalDev, Ch);
-+   if (Ret) return (Ret);
-+
-+   Ret = InitRcb(HalDev, Ch);
-+   if (Ret) return (Ret);
-+
-+   /* setup interrupt mask/enable for the channel */
-+   SAR_TX_MASK_SET(HalDev->dev_base) = (1<<Ch);
-+
-+   /* if using the low priority queue, set up mask for it */
-+   if (HalDev->ChData[Ch].TxNumQueues == 2)            /* +GSG 030421 */
-+     SAR_TX_MASK_SET(HalDev->dev_base) = (1<<Ch)<<16;  /* +GSG 030421 */
-+
-+   SAR_RX_MASK_SET(HalDev->dev_base) = (1<<Ch);
-+
-+   /* call SAR layer to complete the channel setup - hardware configuration of ch */
-+   Ret = HalDev->SarFunc->ChannelSetup(HalDev->SarDev, &HalDev->ChData[Ch]); /* ~GSG 030410 */
-+   if (Ret)                                                                  /* +GSG 030410 */
-+     return (Ret);                                                           /* +GSG 030410 */
-+
-+   /* channel officially open for business */
-+   HalDev->ChIsOpen[Ch][DIRECTION_TX] = TRUE;
-+   HalDev->ChIsOpen[Ch][DIRECTION_RX] = TRUE;
-+
-+   return (EC_NO_ERRORS);
-+  }
-+
-+/*
-+ * Sets up HAL default channel configuration parameter values.
-+ */
-+static void ChannelConfigInit(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
-+  {
-+   int Ch = HalChn->Channel;
-+   
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]ChannelConfigInit(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev,
-+                (bit32u)HalChn);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   HalDev->ChData[Ch].Channel        = Ch;
-+   HalDev->ChData[Ch].TxNumBuffers   = cfg_tx_num_bufs[Ch];
-+   HalDev->ChData[Ch].RxNumBuffers   = cfg_rx_num_bufs[Ch];
-+   HalDev->ChData[Ch].RxBufSize      = cfg_rx_buf_size[Ch];
-+   HalDev->ChData[Ch].RxBufferOffset = cfg_rx_buf_offset[Ch];
-+   HalDev->ChData[Ch].TxNumQueues    = cfg_tx_num_queues[Ch]; 
-+   HalDev->ChData[Ch].CpcsUU         = cfg_cpcs_uu[Ch];
-+   HalDev->ChData[Ch].DaMask         = cfg_da_mask[Ch];
-+   HalDev->ChData[Ch].Priority       = cfg_priority[Ch];
-+   HalDev->ChData[Ch].PktType        = cfg_pkt_type[Ch];
-+   HalDev->ChData[Ch].Vci            = cfg_vci[Ch];
-+   HalDev->ChData[Ch].Vpi            = cfg_vpi[Ch];
-+   HalDev->ChData[Ch].TxVc_CellRate  = cfg_cell_rate[Ch];
-+   HalDev->ChData[Ch].TxVc_QosType   = cfg_qos_type[Ch];
-+   HalDev->ChData[Ch].TxVc_Mbs       = cfg_mbs[Ch];
-+   HalDev->ChData[Ch].TxVc_Pcr       = cfg_pcr[Ch];
-+   HalDev->ChData[Ch].Gfc            = cfg_gfc[Ch];
-+   HalDev->ChData[Ch].Clp            = cfg_clp[Ch];
-+   HalDev->ChData[Ch].Pti            = cfg_pti[Ch];
-+   HalDev->ChData[Ch].RxServiceMax   = cfg_rx_max_service[Ch];
-+   HalDev->ChData[Ch].TxServiceMax   = cfg_tx_max_service[Ch];
-+  }
-+
-+/* 
-+ * Update per channel data in the HalDev based channel structure.
-+ * If a certain channel parameter has been passed with the HAL_DEFAULT
-+ * value (0xFFFFFFFF), then do not copy it. 
-+ */
-+static void ChannelConfigUpdate(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
-+  {
-+   int Ch = HalChn->Channel;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]ChannelConfigUpdate(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev,
-+                (bit32u)HalChn);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   HalDev->ChData[Ch].Channel = Ch;
-+
-+   /* ChannelUpdate is a macro defined in cpcommon.h.  It requires
-+      the presence of the variables named 'Ch' and 'HalChn'.*/
-+   ChannelUpdate(DaMask);
-+   ChannelUpdate(Priority);
-+   ChannelUpdate(PktType);
-+   ChannelUpdate(Vci);
-+   ChannelUpdate(Vpi);
-+   ChannelUpdate(CpcsUU);
-+   ChannelUpdate(Gfc);
-+   ChannelUpdate(Clp);
-+   ChannelUpdate(Pti);
-+   /* AAL5 Stuff */
-+   ChannelUpdate(TxNumBuffers);
-+   ChannelUpdate(RxNumBuffers);
-+   ChannelUpdate(RxBufSize);
-+   ChannelUpdate(RxBufferOffset);
-+   ChannelUpdate(TxNumQueues);
-+   ChannelUpdate(TxServiceMax);
-+   ChannelUpdate(RxServiceMax);
-+   /* PDSP STATE RAM */
-+   ChannelUpdate(TxVc_CellRate);
-+   ChannelUpdate(TxVc_QosType);
-+   ChannelUpdate(TxVc_Mbs);
-+   ChannelUpdate(TxVc_Pcr);
-+   /* OAM */
-+   ChannelUpdate(TxVc_AtmHeader);
-+   ChannelUpdate(TxVc_OamTc);
-+   ChannelUpdate(TxVc_VpOffset);
-+   ChannelUpdate(RxVc_OamCh);
-+   ChannelUpdate(RxVc_OamToHost);
-+   ChannelUpdate(RxVc_AtmHeader);
-+   ChannelUpdate(RxVc_VpOffset);
-+   ChannelUpdate(RxVc_OamTc);
-+   ChannelUpdate(TxVp_AtmHeader);
-+   ChannelUpdate(TxVp_OamTc);
-+   ChannelUpdate(RxVp_AtmHeader);
-+   ChannelUpdate(RxVp_OamCh);
-+   ChannelUpdate(RxVp_OamTc);
-+   ChannelUpdate(RxVp_OamToHost);
-+   ChannelUpdate(RxVp_OamVcList);
-+   ChannelUpdate(FwdUnkVc);
-+  }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * This function opens the specified channel.  The caller must populate
-+ * the @p HalCh structure.  CPHAL default values may be requested for any or all
-+ * members of the @p HalCh structure by supplying a value of 0xFFFFFFFF for the
-+ * given member.  The @p OsSetup parameter is a pointer to an OS defined
-+ * data structure.  If the CPHAL later calls @c MallocRxBuffer(), this pointer
-+ * is returned in that call.
-+ *  
-+ * @param   HalDev  CPHAL module instance. (set by xxxInitModule())   
-+ * @param   HalCh   Per channel information structure.  Implementation specific.
-+ * @param   OsSetup Pointer to an OS-defined data structure.
-+ *
-+ * @return  EC_NO_ERRORS (ok). <BR>
-+ *          Possible Error Codes:<BR>
-+ *          @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *          @ref EC_VAL_NULL_CH_STRUCT "EC_VAL_NULL_CH_STRUCT"<BR>
-+ *          @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
-+ *          @ref EC_VAL_CH_ALREADY_OPEN "EC_VAL_CH_ALREADY_OPEN"<BR>
-+ *          @ref EC_VAL_RX_STATE_RAM_NOT_CLEARED "EC_VAL_RX_STATE_RAM_NOT_CLEARED"<BR>
-+ *          @ref EC_VAL_TX_STATE_RAM_NOT_CLEARED "EC_VAL_TX_STATE_RAM_NOT_CLEARED"<BR>
-+ *          @ref EC_VAL_TCB_MALLOC_FAILED "EC_VAL_TCB_MALLOC_FAILED"<BR>
-+ *          @ref EC_VAL_RCB_MALLOC_FAILED "EC_VAL_RCB_MALLOC_FAILED"<BR>
-+ *          @ref EC_VAL_RX_BUFFER_MALLOC_FAILED "EC_VAL_RX_BUFFER_MALLOC_FAILED"<BR>
-+ *          @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR>
-+ */
-+static int halChannelSetup(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup)
-+  {
-+  int Ch, Ret;
-+   
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]halChannelSetup(HalDev:%08x, HalCh:%08x, OsSetup:%08x)\n", (bit32u)HalDev,
-+                (bit32u)HalCh, (bit32u)OsSetup);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+  /* Verify proper device state */
-+  if (HalDev->State < enInitialized)
-+    return (EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE);
-+
-+  /* We require the channel structure to be passed, even if it only contains
-+     the channel number */
-+  if (HalCh == NULL)
-+    {
-+     return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_NULL_CH_STRUCT);
-+    }
-+
-+  Ch = HalCh->Channel;
-+
-+  if ((Ch < 0) || (Ch > MAX_AAL5_CHAN))
-+    {
-+     return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_INVALID_CH);
-+    }
-+
-+  /* if channel is already open, this call is invalid */
-+  if ((HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE) || (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE))
-+    {
-+     return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_CH_ALREADY_OPEN);
-+    }
-+
-+  /* channel is closed, but might be setup.  If so, reopen the hardware channel. */
-+  if ((HalDev->ChIsSetup[Ch][DIRECTION_TX] == FALSE) && (HalDev->ChIsSetup[Ch][DIRECTION_RX] == FALSE))
-+    {
-+      /* Setup channel configuration */
-+      /* Store OS_SETUP */
-+      HalDev->ChData[Ch].OsSetup = OsSetup;                                         /* ~GSG 030508 */
-+
-+      /* setup HAL default values for this channel first */
-+      ChannelConfigInit(HalDev, HalCh);
-+ 
-+      /* retrieve options.conf channel parameters */
-+      /* currently ignoring return value, making the choice that it's okay if
-+         the user does not supply channel configuration in the data store */
-+      ChannelConfigGet(HalDev, HalCh);
-+      
-+      /* update HalDev with data given in HalCh */  
-+      ChannelConfigUpdate(HalDev, HalCh);
-+      
-+#ifdef __CPHAL_DEBUG
-+      if (DBG(8))
-+        {
-+         dbgChannelConfigDump(HalDev, Ch);
-+        }
-+#endif
-+
-+      /* HalDev->ChIsSetup[Ch][0] = TRUE; */
-+      HalDev->ChIsSetup[Ch][DIRECTION_TX] = TRUE;
-+      HalDev->ChIsSetup[Ch][DIRECTION_RX] = TRUE;
-+
-+      /* I don't initialize RcbStart or TcbStart here because their values may be
-+         reused across several Setup/Teardown calls */
-+    }
-+
-+  /* If the hardware has been opened (is out of reset), then configure the channel
-+     in the hardware. NOTE: ChannelConfigApply calls the CPSAR ChannelSetup()! */
-+  if (HalDev->State == enOpened)
-+    {
-+     Ret = ChannelConfigApply(HalDev, HalCh);
-+     if (Ret) return (Ret);
-+    }
-+
-+  return (EC_NO_ERRORS);
-+  }
-+   
-+/*
-+ *  This function configures the rate at which the OAM timer scheduler
-+ *  channels will be scheduled.  The value of OamRate is the number of
-+ *  clock ticks between cell transmissions (if OAM function is sourcing
-+ *  cells), or the number of clock ticks between events or absence of events
-+ *  (if OAM function is sinking cells).  The value of i indicates
-+ *  which OAM function to apply the rate to.  A list is given below.
-+ *
-+ *  @par Oam Function Values
-+ *  - 0  : Loopback source
-+ *  - 1  : F4 CC source
-+ *  - 2  : F5 CC source
-+ *  - 3  : F4 CC sink
-+ *  - 4  : F5 CC sink
-+ *  - 5  : F4 TX AIS source
-+ *  - 6  : F5 TX AIS source
-+ *  - 7  : F4 RX RDI source
-+ *  - 8  : F5 RX RDI source
-+ *  - 9  : F4 AIS monitor
-+ *  - 10 : F5 AIS monitor
-+ *
-+ *  The following is information on how to calculate the OAM rate.  There
-+ *  is only one OAM timer that is shared among all channels.  Therefore, if
-+ *  you wanted an OAM source function (ex. F4 CC source) to generate 1 cell/sec 
-+ *  across 8 channels, you would need to configure the OAM timer to schedule 8 
-+ *  cells/sec.  In addition, the credits are shared between segment and end-to-end
-+ *  type OAM cells, so if you were sending both types of cells, you would
-+ *  need to configure the OAM timer for 16 cells/sec.  However, the clock
-+ *  rate must be specified in clock ticks between events.  Using an example
-+ *  clock rate of 125 MHz, the rate in clock ticks can be calculated by 
-+ *  dividing 125 Mhz by 16 cells/sec.  The results is 7812500 ticks.  Thus,
-+ *  every 7812500 clock cycles, an OAM cell will be generated for the F4 CC
-+ *  Source function.
-+ */
-+static void OamRateConfig(HAL_DEVICE *HalDev)
-+  {
-+   int i;
-+   bit32u OamRate, Freq = HalDev->SarFrequency;
-+
-+   /* Configure OAM Timer State Block */
-+   for (i=0; i<NUM_OAM_RATES; i++)
-+     {
-+      switch(i)
-+        {
-+         case 0:  OamRate = ((Freq/1000)*HalDev->OamLbTimeout); 
-+                  break;
-+         case 1: 
-+         case 2:
-+         case 5:
-+         case 6: 
-+         case 7:
-+         case 8:  OamRate = (Freq/38);
-+                  break;
-+         case 3:
-+         case 4:  OamRate = ((Freq*3) + (Freq/2))/38;
-+                  break;
-+         case 9:
-+         case 10: OamRate = ((Freq*2) + (Freq/2))/38;
-+                  break;
-+         default: OamRate = (Freq*5);
-+                  break;
-+        }
-+  
-+      *(pOAM_TIMER_STATE_WORD_0(HalDev->dev_base) + (i*64) + 1) = OamRate;
-+     }
-+  }
-+
-+/**
-+ *  @ingroup AAL5_Functions
-+ *  This function is used to enable OAM functions (other than loopback) for a 
-+ *  particular channel.  The channel (embedded within OamConfig - see below) must 
-+ *  have been configured for firmware OAM (not host OAM) for these configurations
-+ *  to take effect.  More than one function may be enabled at one time. 
-+ *  If more than one function is enabled, they must all be of the same level, all
-+ *  F4(VP) or all F5(VC).   
-+ * 
-+ *  The usage of the OamConfig parameter is described through the table below.  To
-+ *  initiate firmware OAM, set one or more bits in OamConfig corresponding to the
-+ *  various OAM functions.  To disable firmware OAM functions, set bit 30 along 
-+ *  with any other combination of bits to shutdown various OAM functions at once.
-+ *
-+ *  Acronyms:
-+ *  e2e - end to end, seg - segment, CC - continuity check, 
-+ *  AIS - Alarm Indication Signal
-+ *
-+ *  @par Bit:   Function:               Description
-+ *  - 31:       Reserved:
-+ *  - 30:       Setup/Teardown:         0 - enable, 1 - disable (Note 1)
-+ *  - 29:       F4  CC  Source seg:     0 - no action, 1 - configure 
-+ *  - 28:       F4  CC  Source e2e:     0 - no action, 1 - configure
-+ *  - 27:       F4  AIS Source seg:     0 - no action, 1 - configure
-+ *  - 26:       F4  AIS Source e2e:     0 - no action, 1 - configure
-+ *  - 25:       F5  CC  Source seg:     0 - no action, 1 - configure
-+ *  - 24:       F5  CC  Source e2e:     0 - no action, 1 - configure
-+ *  - 23:       F5  AIS Source seg:     0 - no action, 1 - configure
-+ *  - 22:       F5  AIS Source e2e:     0 - no action, 1 - configure
-+ *  - 21:       F4  CC  Sink seg:       0 - no action, 1 - configure
-+ *  - 20:       F4  CC  Sink e2e:       0 - no action, 1 - configure
-+ *  - 19:       F5  CC  Sink seg:       0 - no action, 1 - configure
-+ *  - 18:       F5  CC  Sink e2e:       0 - no action, 1 - configure
-+ *  - 17:8:     Reserved:
-+ *  - 7:0:      Channel:                AAL5/AAL2 VC/VP channel (Note 2)
-+ * 
-+ *
-+ *  Note 1:  This bit must be clear to enable the specified OAM function.
-+ *  Note 2:  This must specify the VC channel for F5 functions, and the VP
-+ *           channel for F4 functions.
-+ *
-+ *  @param HalDev      CPHAL module instance. (set by xxxInitModule())
-+ *  @param OamConfig   A 32-bit integer field defined as follows: 
-+ */
-+static void halOamFuncConfig(HAL_DEVICE *HalDev, unsigned int OamConfig)
-+  {
-+   /* GPR 0 */
-+   SAR_PDSP_HOST_OAM_CONFIG_REG(HalDev->dev_base) = OamConfig;
-+  }
-+
-+/**
-+ *  @ingroup AAL5_Functions
-+ *  This function is used to enable OAM loopback functions for a particular 
-+ *  channel.  The channel (embedded within OamConfig - see below) must have been 
-+ *  configured for firmware OAM (not host OAM) for these configurations to take 
-+ *  effect.  Only one loopback function can be enabled at a time.  
-+ *
-+ *  The LLID is inserted into to the OAM cell's LLID field, and it specifies the 
-+ *  LLID of the connection point in the network where the generated loopback cell
-+ *  should be turned around.  The LLID is composed of 4 32-bit words, and this 
-+ *  function expects the caller to pass an array of 4 words in the LLID field.  
-+ *  The CorrelationTag is a 32-bit word that the PDSP uses to correlate loopback 
-+ *  commands with loopback responses.  It should simply be changed for each 
-+ *  call, and there is no restriction on the value used for CorrelationTag.
-+ * 
-+ *  The usage of the OamConfig parameter is described through the table below.  To
-+ *  initiate firmware OAM, set one of the bits corresponding to the
-+ *  various loopback OAM functions.  Note that only one loopback source may be 
-+ *  commanded at a time.
-+ *
-+ *  Acronyms:
-+ *  e2e - end to end, seg - segment, LB - loopback
-+ * 
-+ *  @par Bit:   Function:               Description
-+ *  - 31:16:    Reserved:
-+ *  - 15:       F4  LB Source seg:      0 - no action, 1 - configure (Note 1)
-+ *  - 14:       F4  LB Source seg:      0 - no action, 1 - configure (Note 1)
-+ *  - 13:       F4  LB Source e2e:      0 - no action, 1 - configure (Note 1)
-+ *  - 12:       F4  LB Source e2e:      0 - no action, 1 - configure (Note 1) 
-+ *  - 11:8:     Reserved:
-+ *  - 7:0:      Channel:                AAL5/AAL2 VC/VP channel (Note 2)
-+ * 
-+ *
-+ *  Note 1:  Only one LB function may be enabled at one time.  Once enabled, 
-+ *           the PDSP will time out after 5 seconds.  The host must wait until it 
-+ *           has received the result of the current LB request before initiating 
-+ *           a new request. <BR>
-+ *  Note 2:  This must specify the VC channel for F5 functions, and the VP
-+ *           channel for F4 functions.
-+ *
-+ *  @param HalDev      CPHAL module instance. (set by xxxInitModule())
-+ *  @param OamConfig   A 32-bit integer field defined as follows: 
-+ *  @param LLID        Loopback Location Identifier (passed as 4 word array).
-+ *                     Must be configured in big endian format.
-+ *  @param CorrelationTag 32-bit tag correlates loopback commands with loopback 
-+ *                        responses.  Must be configured in big endian format.
-+ *
-+ */
-+static void halOamLoopbackConfig(HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag)
-+  {
-+   volatile bit32u *tmp;
-+
-+   /* test to see if this is a loopback command */
-+   if (OamConfig & 0xf000)
-+     {
-+      /* write the OAM correlation tag (GPR 1) */
-+      SAR_PDSP_OAM_CORR_REG(HalDev->dev_base) = CorrelationTag;
-+
-+      /* write the LLID */
-+      tmp = pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base);
-+
-+      /* advance past the CPID */
-+      tmp += 4;
-+
-+      *tmp++ = LLID[0];
-+      *tmp++ = LLID[1];
-+      *tmp++ = LLID[2];
-+      *tmp   = LLID[3];
-+
-+      /* GPR 0 */
-+      SAR_PDSP_HOST_OAM_CONFIG_REG(HalDev->dev_base) = OamConfig;
-+     }
-+  }
-+
-+/*
-+ *  This function allows the host software to access any register directly.
-+ *  Primarily used for debug.
-+ *  
-+ *  @param   HalDev      CPHAL module instance. (set by xxxInitModule())  
-+ *  @param   RegOffset   Hexadecimal offset to desired register (from device base addr)
-+ *
-+ *  @return  Volatile pointer to desired register.
-+ */
-+static volatile bit32u* halRegAccess(HAL_DEVICE *HalDev, bit32u RegOffset)
-+  {
-+   /* compute the register address */
-+   return ((volatile bit32u *)(HalDev->dev_base + RegOffset)); 
-+  }
-+
-+#ifdef __CPHAL_DEBUG
-+static void dbgConfigDump(HAL_DEVICE *HalDev)
-+  {
-+   dbgPrintf("  AAL5 Inst %d Config Dump:\n", HalDev->Inst);
-+   dbgPrintf("    Base     :%08x, offset:%08d\n", 
-+             HalDev->dev_base, HalDev->offset);
-+   dbgPrintf("    Interrupt:%08d, debug :%08d\n", 
-+             HalDev->interrupt, HalDev->debug);
-+   osfuncSioFlush();
-+  }
-+#endif
-+
-+/**
-+ *  @ingroup CPHAL_Functions
-+ *  Performs a variety of control functions on the CPHAL module.  It is used to
-+ *  modify/read configuration parameters and to initiate internal functions.
-+ *  The @p Key indicates the function to perform or the parameter to access (note 
-+ *  that these Keys are identical to those used in accessing the configuration data
-+ *  store).  @p Action is applicable to parameters only, and indicates what the
-+ *  CPHAL should do with the parameter (i.e. "Set", "Get", etc..).  The actions
-+ *  for each parameter are defined in the module specific documentation.
-+ *  
-+ *  @param   HalDev      CPHAL module instance. (set by xxxInitModule())
-+ *  @param   Key         Key specifying the parameter to change or internal function to initiate.  See module specific documentation for available keys.
-+ *  @param   Action      Specifies the action to take.  See module specific documentation for available actions.
-+ *  @param   Value       Pointer to new value for given @p Key parameter ("Set"), or returned value of Key ("Get").
-+ *  
-+ *  @return  EC_NO_ERRORS (ok).<BR>
-+ *           Possible Error Codes:<BR>
-+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *           @ref EC_VAL_KEY_NOT_FOUND "EC_VAL_KEY_NOT_FOUND"<BR>
-+ *           @ref EC_VAL_ACTION_NOT_FOUND "EC_VAL_ACTION_NOT_FOUND"<BR>     
-+ */
-+static int halControl(HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value)
-+  {
-+   int Level, Ch, KeyFound=0, ActionFound=0, rc=EC_NO_ERRORS, Queue;
-+   char *TmpKey = (char *)Key;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]halControl(HalDev:%08x, Key:%s, Action:%s, Value:%08x)\n", (bit32u)HalDev,
-+                Key, Action, (bit32u)Value);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* Verify proper device state */
-+   if (HalDev->State < enInitialized)
-+     return (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_INVALID_STATE);   
-+
-+   if (HalDev->OsFunc->Strcmpi(Key, "Debug") == 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         HalDev->debug = *(int *)Value;
-+         /* also setup debug variable in CPSAR module */
-+         rc = HalDev->SarFunc->Control(HalDev->SarDev, "Debug", "Set", Value);
-+        }
-+     }
-+
-+   if (HalDev->OsFunc->Strstr(Key, "FwdUnkVc.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+  
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("FwdUnkVc.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         HalDev->ChData[Ch].FwdUnkVc = *(int *)Value;
-+
-+         if ((HalDev->State == enOpened) && (HalDev->ChData[Ch].PktType == 3))
-+           rc = HalDev->SarFunc->Control(HalDev->SarDev, Key, Action, Value);         
-+        }
-+     }
-+
-+   /* +GSG 030407 */
-+   if (HalDev->OsFunc->Strcmpi(Key, "OamMode") == 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         rc = HalDev->SarFunc->Control(HalDev->SarDev, Key, Action, Value);         
-+        }
-+
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+         rc = HalDev->SarFunc->Control(HalDev->SarDev, Key, Action, Value);
-+        }
-+     }
-+
-+   /* +GSG 030307 */
-+   if (HalDev->OsFunc->Strcmpi(Key, "Version") == 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+         *(const char **)Value = pszVersion_CPAAL5;
-+        }
-+     }
-+
-+   /* +GSG 030529 */
-+   if (HalDev->OsFunc->Strcmpi(Key, "TurboDslErrors") == 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+         *(int *)Value = HalDev->TurboDslErrors;
-+        }
-+     }
-+   
-+   /* +GSG 030416 */
-+   if (HalDev->OsFunc->Strcmpi(Key, "F4_LB_Counter") == 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+         *(int *)Value = SAR_PDSP_OAM_F4_LB_COUNT_REG(HalDev->dev_base);
-+        }
-+     }
-+
-+   /* +GSG 030416 */
-+   if (HalDev->OsFunc->Strcmpi(Key, "F5_LB_Counter") == 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+         *(int *)Value = SAR_PDSP_OAM_F5_LB_COUNT_REG(HalDev->dev_base);
-+        }
-+     }
-+   
-+   if (HalDev->OsFunc->Strstr(Key, "Stats;") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+         TmpKey += HalDev->OsFunc->Strlen("Stats;");
-+         Level = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+         TmpKey++;
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+         TmpKey++;
-+         Queue = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+         TmpKey++;
-+         StatsGet(HalDev, (void **)Value, Level, Ch, Queue);
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #100 */
-+   if (HalDev->OsFunc->Strstr(Key, "Gfc.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("Gfc.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* first, store new value in our channel structure */
-+         HalDev->ChData[Ch].Gfc = *(int *)Value;
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #100 */
-+   if (HalDev->OsFunc->Strstr(Key, "Clp.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("Clp.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* first, store new value in our channel structure */
-+         HalDev->ChData[Ch].Clp = *(int *)Value;
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #100 */
-+   if (HalDev->OsFunc->Strstr(Key, "Pti.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("Pti.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* first, store new value in our channel structure */
-+         HalDev->ChData[Ch].Pti = *(int *)Value;
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #100 */
-+   if (HalDev->OsFunc->Strstr(Key, "CpcsUU.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("CpcsUU.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* first, store new value in our channel structure */
-+         HalDev->ChData[Ch].CpcsUU = *(int *)Value;
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #100 */
-+   if (HalDev->OsFunc->Strstr(Key, "TxVc_CellRate.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("TxVc_CellRate.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* first, store new value in our channel structure */
-+         HalDev->ChData[Ch].TxVc_CellRate = *(int *)Value;
-+
-+         /* now, apply to PDSP state RAM */
-+         if (HalDev->State == enOpened)
-+           *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64))= HalDev->ChData[Ch].TxVc_CellRate;
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #100 */
-+   if (HalDev->OsFunc->Strstr(Key, "TxVc_Mbs.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("TxVc_Mbs.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* first, store new value in our channel structure */
-+         HalDev->ChData[Ch].TxVc_Mbs = *(int *)Value;
-+
-+         /* now, apply to PDSP state RAM */
-+         if (HalDev->State == enOpened)
-+           *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+2)= HalDev->ChData[Ch].TxVc_Mbs;
-+        }
-+     }
-+
-+   if (HalDev->OsFunc->Strstr(Key, "TxVc_AtmHeader.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("TxVc_AtmHeader.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* first, store new value in our channel structure */
-+         HalDev->ChData[Ch].TxVc_AtmHeader = *(int *)Value;
-+
-+         /* now, apply to PDSP state RAM */
-+         if (HalDev->State == enOpened)
-+           *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+6)= HalDev->ChData[Ch].TxVc_AtmHeader;
-+        }
-+     }
-+
-+   if (HalDev->OsFunc->Strstr(Key, "TxVp_AtmHeader.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("TxVp_AtmHeader.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* first, store new value in our channel structure */
-+         HalDev->ChData[Ch].TxVp_AtmHeader = *(int *)Value;
-+
-+         /* now, apply to PDSP state RAM */
-+         if (HalDev->State == enOpened)
-+           *(pPDSP_AAL5_TX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64))= HalDev->ChData[Ch].TxVp_AtmHeader;
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #100 */
-+   if (HalDev->OsFunc->Strstr(Key, "TxVc_Pcr.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("TxVc_Pcr.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* first, store new value in our channel structure */
-+         HalDev->ChData[Ch].TxVc_Pcr = *(int *)Value;
-+
-+         /* now, apply to PDSP state RAM */
-+         if (HalDev->State == enOpened)
-+           *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+4)= HalDev->ChData[Ch].TxVc_Pcr;
-+        }
-+     }
-+
-+   /* +GSG 030428 */
-+   if (HalDev->OsFunc->Strstr(Key, "RxVc_OamCh.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("RxVc_OamCh.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* first, store new value in our channel structure */
-+         HalDev->ChData[Ch].RxVc_OamCh = (*(int *)Value) & 0xff;
-+
-+         /* now, apply to PDSP state RAM */
-+         if (HalDev->State == enOpened)
-+           *(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)) |= HalDev->ChData[Ch].RxVc_OamCh;
-+        }
-+     }
-+
-+   /* +GSG 030428 */
-+   if (HalDev->OsFunc->Strstr(Key, "RxVp_OamCh.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("RxVp_OamCh.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* first, store new value in our channel structure */
-+         HalDev->ChData[Ch].RxVp_OamCh = (*(int *)Value) & 0xff;
-+
-+         /* now, apply to PDSP state RAM */
-+         if (HalDev->State == enOpened)
-+           *(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+1) |= HalDev->ChData[Ch].RxVp_OamCh;
-+        }
-+     }
-+
-+   /* +GSG 030304 */
-+   /* Fixes PITS #98 */
-+   if (HalDev->OsFunc->Strstr(Key, "PdspEnable") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         
-+         /* this variable is controlled by the CPSAR module */
-+         if (HalDev->State == enOpened)
-+           {
-+            rc=HalDev->SarFunc->Control(HalDev->SarDev, "PdspEnable", "Set", Value);
-+           }
-+        }
-+     }
-+
-+   if (HalDev->OsFunc->Strstr(Key, "OamLbTimeout") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         
-+         HalDev->OamLbTimeout = *(int *)Value;
-+         /* this variable is controlled by the CPSAR module */
-+         if (HalDev->State == enOpened)
-+           {
-+            *(pOAM_TIMER_STATE_WORD_0(HalDev->dev_base) + 1) = 
-+              ((HalDev->SarFrequency/1000) * HalDev->OamLbTimeout);
-+           }
-+        }
-+     }
-+
-+   /* +GSG 030306 (PITS #114) */
-+   if (HalDev->OsFunc->Strstr(Key, "DeviceCPID") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         unsigned int* local = (unsigned int *)Value;
-+         ActionFound=1;
-+         /* first, store new value in our hal structure */
-+         HalDev->DeviceCPID[0] = local[0];
-+         HalDev->DeviceCPID[1] = local[1];
-+         HalDev->DeviceCPID[2] = local[2];
-+         HalDev->DeviceCPID[3] = local[3];
-+
-+         /* now, apply to PDSP state RAM */
-+         if (HalDev->State == enOpened)
-+           {
-+            *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 0) = HalDev->DeviceCPID[0];
-+            *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 1) = HalDev->DeviceCPID[1];
-+            *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 2) = HalDev->DeviceCPID[2];
-+            *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 3) = HalDev->DeviceCPID[3];
-+           }
-+        }
-+     }
-+
-+   /* +GSG 030304 */
-+   /* Fixes PITS #99 */
-+   if (HalDev->OsFunc->Strstr(Key, "StrictPriority") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+        
-+         /* used in halOpen to decide which interrupt handler to use */
-+         HalDev->StrictPriority = *(int *)Value;
-+        }
-+     }
-+
-+   if (HalDev->OsFunc->Strstr(Key, hcMaxFrags) != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+        
-+         if ((*(int *)Value) > 0)
-+           HalDev->MaxFrags = *(int *)Value;
-+          else
-+           rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_INVALID_VALUE);
-+        }
-+
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+
-+         *(int *)Value = HalDev->MaxFrags;
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #103 */
-+   if (HalDev->OsFunc->Strstr(Key, "RxVc_RDICount.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+        
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("RxVc_RDICount.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* PDSP's Rx VC State word 3 contains the value */
-+         if (HalDev->State == enOpened)
-+           {
-+            *(int *)Value = (((*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64))) & RDI_CNT_MASK)>>RDI_CNT_SHIFT);
-+           }
-+        }
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+        
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("RxVc_RDICount.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* All sets write 0, this action is a clear only */
-+         if (HalDev->State == enOpened)
-+           {
-+            (*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64))) &=~ RDI_CNT_MASK;
-+           }
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #103 */
-+   if (HalDev->OsFunc->Strstr(Key, "RxVc_AISseg.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+        
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("RxVc_AISseg.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* PDSP's Rx VC State word 3 contains the value */
-+         if (HalDev->State == enOpened)
-+           {
-+            *(int *)Value = (((*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+3)) & AIS_SEG_MASK)>>AIS_SEG_SHIFT);
-+           }
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #103 */
-+   if (HalDev->OsFunc->Strstr(Key, "RxVc_AISetoe.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+        
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("RxVc_AISetoe.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* PDSP's Rx VC State word 3 contains the value */
-+         if (HalDev->State == enOpened)
-+           {
-+            *(int *)Value = (((*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+3)) & AIS_ETOE_MASK)>>AIS_ETOE_SHIFT);
-+           }
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #103 */
-+   if (HalDev->OsFunc->Strstr(Key, "RxVp_RDICount.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+        
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("RxVp_RDICount.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* PDSP's Rx VC State word 3 contains the value */
-+         if (HalDev->State == enOpened)
-+           {
-+            *(int *)Value = (((*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+1)) & RDI_CNT_MASK)>>RDI_CNT_SHIFT);
-+           }
-+        }
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+        
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("RxVp_RDICount.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* All sets write 0, this action is a clear only */
-+         if (HalDev->State == enOpened)
-+           {
-+            (*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+1)) &=~ RDI_CNT_MASK;
-+           }
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #103 */
-+   if (HalDev->OsFunc->Strstr(Key, "RxVp_AISseg.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+        
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("RxVp_AISseg.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* PDSP's Rx VC State word 3 contains the value */
-+         if (HalDev->State == enOpened)
-+           {
-+            *(int *)Value = (((*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+2)) & AIS_SEG_MASK)>>AIS_SEG_SHIFT);
-+           }
-+        }
-+     }
-+
-+   /* +GSG 030306 */
-+   /* Fixes PITS #103 */
-+   if (HalDev->OsFunc->Strstr(Key, "RxVp_AISetoe.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+        
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("RxVp_AISetoe.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* PDSP's Rx VC State word 3 contains the value */
-+         if (HalDev->State == enOpened)
-+           {
-+            *(int *)Value = (((*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+2)) & AIS_ETOE_MASK)>>AIS_ETOE_SHIFT);
-+           }
-+        }
-+     }
-+
-+   if (KeyFound == 0)
-+     rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_KEY_NOT_FOUND);
-+
-+   if (ActionFound == 0)
-+     rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_ACTION_NOT_FOUND);
-+
-+   return(rc);    
-+  }
-+
-+/*
-+ * Sets up HAL default configuration parameter values.
-+ */
-+static void ConfigInit(HAL_DEVICE *HalDev)
-+  {
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]ConfigInit(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* configure some defaults with tnetx7300 values */
-+   HalDev->dev_base = 0xa3000000;
-+   HalDev->offset = 0;
-+   HalDev->interrupt = 15;
-+   HalDev->debug = 0;
-+   HalDev->MaxFrags = 46;
-+   HalDev->OamLbTimeout = 5000;
-+  }
-+
-+/*
-+ * Retrieve HAL configuration parameter values.
-+ */
-+static bit32u ConfigGet(HAL_DEVICE *HalDev)
-+  {
-+   bit32u Ret;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]ConfigGet(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* get the configuration parameters common to all modules */
-+   Ret = ConfigGetCommon(HalDev);
-+   if (Ret) return (EC_AAL5|Ret);
-+
-+   /* get AAL5 specific configuration parameters here */
-+   Ret = HalDev->OsFunc->Control(HalDev->OsDev, hcSarFrequency, pszGET, &HalDev->SarFrequency); /* GSG +030416*/
-+   if (Ret)                                                                                /* GSG +030416*/
-+     HalDev->SarFrequency = 200000000;  /* 200 Mhz default */                              /* GSG +030416*/
-+
-+   return (EC_NO_ERRORS);
-+  }
-+
-+/** 
-+ *  @ingroup CPHAL_Functions
-+ *  This function initializes the CPHAL module. It gathers all
-+ *  necessary global configuration info from the configuration file, and
-+ *  performs initialization and configuration of the device.  Note that
-+ *  the device operation is not started until the OS calls @c Open().
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *
-+ *  @return  EC_NO_ERRORS (ok). <BR>
-+ *           Possible Error Codes:<BR>
-+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *           @ref EC_VAL_BASE_ADDR_NOT_FOUND "EC_VAL_BASE_ADDR_NOT_FOUND"<BR>
-+ *           @ref EC_VAL_RESET_BIT_NOT_FOUND "EC_VAL_RESET_BIT_NOT_FOUND"<BR>
-+ *           @ref EC_VAL_INTERRUPT_NOT_FOUND "EC_VAL_INTERRUPT_NOT_FOUND"<BR>
-+ *           @ref EC_VAL_OFFSET_NOT_FOUND "EC_VAL_OFFSET_NOT_FOUND"<BR>
-+ */
-+static int halInit(HAL_DEVICE *HalDev)
-+  {
-+  int i;
-+  bit32u error_code;
-+
-+#ifdef __CPHAL_DEBUG
-+  if (DBG(0))
-+    {
-+     dbgPrintf("[aal5]halInit(HalDev:%08x)\n", (bit32u)HalDev);
-+     osfuncSioFlush();
-+    }
-+#endif
-+
-+  /* Verify proper device state */
-+  if (HalDev->State != enDevFound)
-+    return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_INVALID_STATE);
-+
-+  /* Configure HAL defaults */
-+  ConfigInit(HalDev);
-+
-+  /* Retrieve HAL configuration parameters from data store */
-+  error_code = ConfigGet(HalDev);
-+  if (error_code) return (error_code);
-+ 
-+  /* Other items (OAM related) that need to be passed in somehow */
-+  HalDev->DeviceCPID[0] = 0xffffffff;
-+  HalDev->DeviceCPID[1] = 0xffffffff;
-+  HalDev->DeviceCPID[2] = 0xffffffff;
-+  HalDev->DeviceCPID[3] = 0xffffffff;
-+  HalDev->LBSourceLLID[0] = 0xffffffff;
-+  HalDev->LBSourceLLID[1] = 0xffffffff;
-+  HalDev->LBSourceLLID[2] = 0xffffffff;
-+  HalDev->LBSourceLLID[3] = 0xffffffff;
-+
-+  /* Initialize SAR layer*/
-+  error_code = HalDev->SarFunc->Init(HalDev->SarDev);
-+  if (error_code) return (error_code);
-+
-+  /* Initialize various HalDev members.  This is probably overkill, since these
-+     are initialized in ChannelSetup() and HalDev is cleared in InitModule(). */
-+  for (i=0; i<NUM_AAL5_CHAN; i++)
-+    { 
-+     HalDev->InRxInt[i]=FALSE;
-+     HalDev->ChIsOpen[i][DIRECTION_TX] = FALSE;
-+     HalDev->ChIsOpen[i][DIRECTION_RX] = FALSE;
-+     HalDev->TcbStart[i][0] = 0;
-+     HalDev->TcbStart[i][1] = 0;
-+     HalDev->RcbStart[i]  = 0;
-+    }
-+
-+  /* initialize SAR stats */
-+  StatsClear(HalDev);
-+
-+  /* init Stat pointers */
-+ 
-+  /* even though these statistics may be for multiple channels/queues, i need 
-+     only configure the pointer to the beginning of the array, and I can index 
-+     from there if necessary */
-+  StatsTable0[0].StatPtr  = &HalDev->Stats.CrcErrors[0];
-+  StatsTable0[1].StatPtr  = &HalDev->Stats.LenErrors[0];
-+  StatsTable0[2].StatPtr  = &HalDev->Stats.AbortErrors[0];
-+  StatsTable0[3].StatPtr  = &HalDev->Stats.StarvErrors[0];
-+
-+  StatsTable1[0].StatPtr  = &HalDev->Stats.DmaLenErrors[0];
-+  StatsTable1[1].StatPtr  = &HalDev->Stats.TxMisQCnt[0][0];
-+  StatsTable1[2].StatPtr  = &HalDev->Stats.RxMisQCnt[0];
-+  StatsTable1[3].StatPtr  = &HalDev->Stats.TxEOQCnt[0][0];
-+  StatsTable1[4].StatPtr  = &HalDev->Stats.RxEOQCnt[0];
-+  StatsTable1[5].StatPtr  = &HalDev->Stats.RxPacketsServiced[0];
-+  StatsTable1[6].StatPtr  = &HalDev->Stats.TxPacketsServiced[0][0];
-+  StatsTable1[7].StatPtr  = &HalDev->Stats.RxMaxServiced;
-+  StatsTable1[8].StatPtr  = &HalDev->Stats.TxMaxServiced[0][0];
-+  StatsTable1[9].StatPtr  = &HalDev->Stats.RxTotal;
-+  StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal;
-+
-+  StatsTable2[0].StatPtr  = (bit32u *)&HalDev->RcbPool[0];
-+  StatsTable2[1].StatPtr  = &HalDev->RxActQueueCount[0];
-+  StatsTable2[2].StatPtr  = (bit32u *)&HalDev->RxActQueueHead[0];
-+  StatsTable2[3].StatPtr  = (bit32u *)&HalDev->RxActQueueTail[0];
-+  StatsTable2[4].StatPtr  = &HalDev->RxActive[0];
-+  StatsTable2[5].StatPtr  = (bit32u *)&HalDev->RcbStart[0];
-+  StatsTable2[6].StatPtr  = &HalDev->RxTeardownPending[0];
-+  StatsTable2[7].StatPtr  = (bit32u *)&HalDev->TcbPool[0][0];
-+  StatsTable2[8].StatPtr  = &HalDev->TxActQueueCount[0][0];
-+  StatsTable2[9].StatPtr  = (bit32u *)&HalDev->TxActQueueHead[0][0];
-+  StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0];
-+  StatsTable2[11].StatPtr = &HalDev->TxActive[0][0];
-+  StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0];
-+  StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0];
-+
-+  StatsTable4[0].StatPtr  = &HalDev->dev_base;
-+  StatsTable4[1].StatPtr  = &HalDev->offset;
-+  StatsTable4[2].StatPtr  = &HalDev->interrupt;
-+  StatsTable4[3].StatPtr  = &HalDev->debug;
-+  StatsTable4[4].StatPtr  = &HalDev->Inst;
-+ 
-+  StatsTable3[0].StatPtr  = &HalDev->ChData[0].RxBufSize;
-+  StatsTable3[1].StatPtr  = &HalDev->ChData[0].RxBufferOffset;
-+  StatsTable3[2].StatPtr  = &HalDev->ChData[0].RxNumBuffers;
-+  StatsTable3[3].StatPtr  = &HalDev->ChData[0].RxServiceMax;
-+  StatsTable3[4].StatPtr  = &HalDev->ChData[0].TxNumBuffers;
-+  StatsTable3[5].StatPtr  = &HalDev->ChData[0].TxNumQueues;
-+  StatsTable3[6].StatPtr  = &HalDev->ChData[0].TxServiceMax;
-+  StatsTable3[7].StatPtr  = &HalDev->ChData[0].CpcsUU;
-+  StatsTable3[8].StatPtr  = &HalDev->ChData[0].Gfc;
-+  StatsTable3[9].StatPtr  = &HalDev->ChData[0].Clp;
-+  StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti;
-+  StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask;
-+  StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority;
-+  StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType;
-+  StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci;
-+  StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi;
-+  StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate;
-+  StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType;
-+  StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs;
-+  StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr;
-+
-+  /* update device state */
-+  HalDev->State = enInitialized;
-+
-+#ifdef __CPHAL_DEBUG
-+  if (DBG(9))
-+    dbgConfigDump(HalDev);
-+#endif
-+
-+  return(EC_NO_ERRORS);
-+  }
-+
-+/*
-+ *  Use this function to actually send after queuing multiple packets using 
-+ *  Send().  This is a debug only function that should be removed - it was 
-+ *  necessary to properly implement my loopback tests. 
-+ *
-+ *  @param   HalDev      CPHAL module instance. (set by xxxInitModule()) 
-+ *  @param   Queue       Queue number to kick. 
-+ *
-+ *  @return  0 OK, Non-Zero Not OK
-+ */
-+static int halKick(HAL_DEVICE *HalDev, int Queue)
-+  {
-+   int Ch;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]halKick(HalDev:%08x. Queue:%d)\n", (bit32u)HalDev, Queue);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   for (Ch = 0; Ch < 16; Ch ++)
-+     {
-+      if ((!HalDev->TxActive[Ch][Queue]) && (HalDev->TxActQueueHead[Ch][Queue] != 0))
-+        {
-+         *(pTX_DMA_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+Queue)=
-+           VirtToPhys(HalDev->TxActQueueHead[Ch][Queue]);
-+         HalDev->TxActive[Ch][Queue]=TRUE;
-+        }
-+     } 
-+ 
-+   return (EC_NO_ERRORS);   
-+  }
-+
-+/*  +GSG 030305  For PITS #99
-+ *  Alternate interrupt handler that uses the INT_VECTOR in order to 
-+ *  provide strict priority handling among channels, beginning with Ch 0.
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *  @param   MoreWork (Output) When set to 1, indicates that there is more work to do.
-+ *                    Caller should ensure that the value pointed at is set to 0
-+ *                    prior to the call.
-+ *  @return  0 OK, non-zero error.
-+ */
-+static int DeviceIntAlt(HAL_DEVICE *HalDev, int *MoreWork)
-+  {
-+   int tmp, Ch, WorkFlag;
-+   bit32u rc;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]DeviceIntAlt(HalDev:%08x, MoreWork:%08x)\n", (bit32u)HalDev, (bit32u)MoreWork);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* Verify proper device state - important because a call prior to Open would
-+      result in a lockup */
-+   if (HalDev->State != enOpened)
-+     return(EC_AAL5|EC_FUNC_DEVICE_INT_ALT|EC_VAL_INVALID_STATE);
-+
-+   if ((tmp=SAR_INTR_VECTOR(HalDev->dev_base))&INT_PENDING)
-+     {
-+       /*printf("\015 %d RxQ",HalDev->RxActQueueCount[0]);
-+         HalDev->OsFunc->Control(HalDev->OsDev, enSIO_FLUSH, enNULL, 0); */
-+
-+      if (tmp&TXH_PEND) 
-+        {
-+         /* decide which channel to service */
-+         Ch = (SAR_INTR_VECTOR(HalDev->dev_base) & TXH_PEND_INVEC);
-+
-+         rc = TxInt(HalDev,Ch,0,&WorkFlag);
-+         if (rc) return (rc);
-+
-+         if (WorkFlag == 1)
-+           *MoreWork = 1;
-+        }
-+
-+      if (tmp&TXL_PEND) 
-+        {
-+         /* decide which channel to service */
-+         Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & TXL_PEND_INVEC) >> 4);
-+
-+         rc = TxInt(HalDev,Ch,1,&WorkFlag);
-+         if (rc) return (rc);
-+
-+         if (WorkFlag == 1)
-+           *MoreWork = 1;
-+        }
-+
-+      if (tmp&RX_PEND)
-+        {
-+         /* decide which channel to service */
-+         Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & RX_PEND_INVEC) >> 8);
-+
-+         rc = RxInt(HalDev,Ch,&WorkFlag);
-+         if (rc) return (rc);
-+
-+         if (WorkFlag == 1)
-+           *MoreWork = 1;
-+        }
-+       
-+      if (tmp&STS_PEND)
-+        {
-+         /* GPR 2 code added for PITS 103 */
-+         /* determine interrupt source */
-+         Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & STS_PEND_INVEC) >> 12);
-+
-+         /* only if this is GPR 2 interrupt do we take action */
-+         if (Ch == 26)
-+           {
-+            /* pass loopback result back to OS */
-+            HalDev->OsFunc->Control(HalDev->OsDev, "OamLbResult", "Set",
-+              (bit32u *)pSAR_PDSP_OAM_LB_RESULT_REG(HalDev->dev_base)); 
-+           }
-+
-+         /* clear the interrupt */
-+         SAR_STATUS_CLR_REG(HalDev->dev_base) |= 0x04000000;
-+        }
-+
-+      if (tmp&AAL2_PEND)
-+        { 
-+          /* no action defined */
-+        }
-+    
-+      SAR_INTR_VECTOR(HalDev->dev_base) = 0;
-+     }
-+
-+   return (EC_NO_ERRORS);
-+  }
-+
-+/*
-+ *  Called to service a module interrupt.  This function determines
-+ *  what type of interrupt occurred and dispatches the correct handler.
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *  @param   MoreWork (Output) When set to 1, indicates that there is more work to do.
-+ *                    Caller should ensure that the value pointed at is set to 0
-+ *                    prior to the call.
-+ *  @return  0 OK, non-zero error.
-+ */
-+static int DeviceInt(HAL_DEVICE *HalDev, int *MoreWork)
-+  {
-+    /*static int NextRxCh=0;
-+      static int NextTxCh[2]={0,0};*/
-+
-+   int tmp, Ch, FirstCh, WorkFlag;
-+   int NextTxLCh, NextTxHCh, NextRxCh;
-+   bit32u rc;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]DeviceInt(HalDev:%08x, MoreWork:%08x)\n", (bit32u)HalDev, (bit32u)MoreWork);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* Verify proper device state - important because a call prior to Open would
-+      result in a lockup */
-+   if (HalDev->State != enOpened)
-+     return(EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_INVALID_STATE);
-+
-+   NextTxHCh = HalDev->NextTxCh[0];
-+   NextTxLCh = HalDev->NextTxCh[1];
-+   NextRxCh =  HalDev->NextRxCh;
-+
-+   /* service interrupts while there is more work to do */
-+   /*while (((tmp=SAR_INTR_VECTOR(HalDev->dev_base))&INT_PENDING) && (TotalPkts < 500))*/
-+   if ((tmp=SAR_INTR_VECTOR(HalDev->dev_base))&INT_PENDING)
-+     {
-+       /*printf("\015 %d RxQ",HalDev->RxActQueueCount[0]);
-+         HalDev->OsFunc->Control(HalDev->OsDev, enSIO_FLUSH, enNULL, 0); */
-+
-+      if (tmp&TXH_PEND) 
-+        {
-+         /* decide which channel to service */
-+         FirstCh = NextTxHCh;
-+         while (1)
-+           {
-+            Ch = NextTxHCh++;
-+            if (NextTxHCh == 16)
-+              NextTxHCh = 0;
-+            if (SAR_TX_MASKED_STATUS(HalDev->dev_base) & (1<<Ch))
-+              break;
-+            if (FirstCh == NextTxHCh)
-+              {
-+               /* we checked every channel and still haven't found anything to do */
-+               return (EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_NO_TXH_WORK_TO_DO);
-+              }
-+           }
-+ 
-+         rc = TxInt(HalDev,Ch,0,&WorkFlag);
-+         if (rc) return (rc);
-+
-+         if (WorkFlag == 1)
-+           *MoreWork = 1;
-+        }
-+
-+      if (tmp&TXL_PEND)
-+        {
-+         /* decide which channel to service */
-+         FirstCh = NextTxLCh;
-+         while (1)
-+           {
-+            Ch = NextTxLCh++;
-+            if (NextTxLCh == 16)
-+              NextTxLCh = 0;
-+            if (SAR_TX_MASKED_STATUS(HalDev->dev_base) & (1<<(Ch+16)))
-+              break;
-+            if (FirstCh == NextTxLCh)
-+              {
-+               /* we checked every channel and still haven't found anything to do */
-+               return (EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_NO_TXL_WORK_TO_DO);
-+              }
-+           }
-+
-+         rc = TxInt(HalDev,Ch,1,&WorkFlag);
-+         if (rc) return (rc);
-+
-+         if (WorkFlag == 1)
-+           *MoreWork = 1;       
-+        }
-+         
-+      if (tmp&RX_PEND)
-+        {
-+         FirstCh = NextRxCh;
-+         while (1)
-+           {
-+            Ch = NextRxCh++;   
-+            if (NextRxCh == 16)
-+              NextRxCh = 0;
-+            if (SAR_RX_MASKED_STATUS(HalDev->dev_base) & (1 << Ch))
-+              break;  /* found a channel to service */
-+            if (FirstCh == NextRxCh)
-+              {
-+               /* we checked every channel and still haven't found anything to do */
-+               return (EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_NO_RX_WORK_TO_DO);
-+              }
-+           }
-+
-+         rc = RxInt(HalDev,Ch, &WorkFlag);
-+         if (rc) return (rc);
-+
-+         if (WorkFlag == 1)
-+           *MoreWork = 1;
-+        }
-+       
-+      if (tmp&STS_PEND)
-+        {
-+         /* +GSG 030305 */
-+         /* GPR 2 code added for PITS 103 */
-+         /* determine interrupt source */
-+         Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & STS_PEND_INVEC) >> 12);
-+
-+         /* only if this is GPR 2 interrupt do we take action */
-+         if (Ch == 26)
-+           {
-+            /* pass loopback result back to OS */
-+            HalDev->OsFunc->Control(HalDev->OsDev, "OamLbResult", "Set",
-+              (bit32u *)pSAR_PDSP_OAM_LB_RESULT_REG(HalDev->dev_base)); 
-+           }
-+
-+         /* clear the interrupt */
-+         SAR_STATUS_CLR_REG(HalDev->dev_base) |= 0x04000000;
-+        }
-+
-+      if (tmp&AAL2_PEND)
-+        { 
-+          /* no action defined */
-+        }
-+    
-+      SAR_INTR_VECTOR(HalDev->dev_base) = 0;
-+     }
-+
-+   HalDev->NextTxCh[0] = NextTxHCh;
-+   HalDev->NextTxCh[1] = NextTxLCh;
-+   HalDev->NextRxCh = NextRxCh;
-+
-+   /* This must be done by the upper layer */
-+   /* SAR_EOI(HalDev->dev_base) = 0; */
-+
-+   return (EC_NO_ERRORS);
-+  }
-+
-+/** 
-+ *  @ingroup CPHAL_Functions
-+ *  This function starts the operation of the CPHAL device.  It takes the device
-+ *  out of reset, and calls @c IsrRegister().  This function should be called after 
-+ *  calling the @c Init() function.
-+ *
-+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *
-+ *  @return EC_NO_ERRORS (ok).<BR>
-+ *           Possible Error Codes:<BR>
-+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *           @ref EC_VAL_KEY_NOT_FOUND "EC_VAL_KEY_NOT_FOUND"<BR>
-+ *           @ref EC_VAL_FIRMWARE_TOO_LARGE "EC_VAL_FIRMWARE_TOO_LARGE"<BR>
-+ *           @ref EC_VAL_PDSP_LOAD_FAIL "EC_VAL_PDSP_LOAD_FAIL"<BR>
-+ *           @ref EC_VAL_RX_STATE_RAM_NOT_CLEARED "EC_VAL_RX_STATE_RAM_NOT_CLEARED"<BR>
-+ *           @ref EC_VAL_TX_STATE_RAM_NOT_CLEARED "EC_VAL_TX_STATE_RAM_NOT_CLEARED"<BR>
-+ *           @ref EC_VAL_TCB_MALLOC_FAILED "EC_VAL_TCB_MALLOC_FAILED"<BR>
-+ *           @ref EC_VAL_RCB_MALLOC_FAILED "EC_VAL_RCB_MALLOC_FAILED"<BR>
-+ *           @ref EC_VAL_RX_BUFFER_MALLOC_FAILED "EC_VAL_RX_BUFFER_MALLOC_FAILED"<BR>
-+ *           @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR>
-+ */
-+static int halOpen(HAL_DEVICE *HalDev)
-+  {
-+   int i,Ret;
-+   bit32 SarBase = HalDev->dev_base;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]halOpen(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* Verify proper device state */
-+   if (HalDev->State < enInitialized)
-+     return (EC_AAL5|EC_FUNC_OPEN|EC_VAL_INVALID_STATE);
-+
-+   /* Open the SAR (this brings the whole device out of reset */
-+   Ret = HalDev->SarFunc->Open(HalDev->SarDev); /* ~GSG 030410 */
-+   if (Ret)                                     /* +GSG 030410 */
-+     return (Ret);                              /* +GSG 030410 */
-+
-+   /* Change device state */
-+   HalDev->State = enOpened;
-+
-+
-+#ifdef __CPHAL_DEBUG
-+   /* print out the version information */
-+   if (DBG(7))
-+     {
-+      dbgPrintf("[aal5 halOpen()]Module ID(AAL5-CPSAR):%d, Version:%2d.%02d\n",
-+                (SAR_ID_REG(SarBase)&0xffff0000)>>16,
-+                (SAR_ID_REG(SarBase)&0xff00)>>8,
-+                SAR_ID_REG(SarBase)&0xff);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* GREG 11/1/02:  The State RAM clearing code was previously in cpsar.c,
-+      directly after device reset.  I moved it here because I believe it is
-+      AAL5 specific code.  Also the MAX_CHAN was set to 19 in cpsar.c, which
-+      would have caused this code to clear too much memory! */
-+
-+   /* NOTE:  State RAM must be cleared prior to initializing the PDSP!! */
-+
-+   /* GSG 030416:  Removed all of this.  All PDSP State RAM is cleared
-+      in CPSAR Open().  On Close(), all channels are torndown, thus all
-+      AAL5 channel state RAM is cleared.  */
-+
-+   /* Clear Rx State RAM  */
-+   /*for (i=0; i<NUM_AAL5_CHAN; i++)
-+     for (j=0; j<NUM_RX_STATE_WORDS; j++)
-+     *(pRX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) = 0; */
-+
-+   /* Check that Rx DMA State RAM was cleared */
-+   /*for (i=0; i<NUM_AAL5_CHAN; i++)
-+     for (j=0; j<NUM_RX_STATE_WORDS; j++)
-+       {
-+        if (*(pRX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) != 0)
-+         {
-+          return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_RX_STATE_RAM_NOT_CLEARED);
-+         }
-+         }*/
-+
-+   /* Clear Tx State RAM  */
-+   /*for (i=0; i<NUM_AAL5_CHAN; i++)
-+     for (j=0; j<NUM_TX_STATE_WORDS; j++)
-+       {
-+        *(pTX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) = 0; 
-+        }*/
-+
-+   /* Check that Tx DMA State RAM was cleared */
-+   /*for (i=0; i<NUM_AAL5_CHAN; i++)
-+     for (j=0; j<NUM_TX_STATE_WORDS; j++)
-+       {
-+        if (*(pTX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) != 0)
-+          {
-+           return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_TX_STATE_RAM_NOT_CLEARED);
-+          }
-+          }*/
-+
-+   /* GSG +030523 Malloc space for the Rx fraglist */
-+   HalDev->fraglist = HalDev->OsFunc->Malloc(HalDev->MaxFrags * sizeof(FRAGLIST));
-+
-+   /* For any channels that have been pre-initialized, set them up now */
-+   for (i=0; i<NUM_AAL5_CHAN; i++)
-+     {
-+      if ((HalDev->ChIsSetup[i][0]==TRUE) && (HalDev->ChIsOpen[i][0]==FALSE))
-+        {
-+         CHANNEL_INFO HalChn;
-+         HalChn.Channel = i;
-+         Ret = ChannelConfigApply(HalDev, &HalChn);
-+         if (Ret) return (Ret);
-+        }
-+     }
-+
-+   /* OAM code would be a candidate to go into ConfigApply */
-+
-+   /* Configure OAM Timer State Block */
-+   OamRateConfig(HalDev); /* +GSG 030416 */
-+
-+   /* Setup OAM Configuration Block */
-+   for (i=0; i<8; i++) /* ~GSG 030603 4->8 */
-+     {
-+      if (i < 4)
-+        *(pOAM_CONFIG_BLOCK_WORD_0(SarBase) + i) = HalDev->DeviceCPID[i];
-+      else
-+        *(pOAM_CONFIG_BLOCK_WORD_0(SarBase) + i) = HalDev->LBSourceLLID[i-4];
-+     }
-+
-+   /* Setup OAM Padding Block */
-+   for (i=0; i<12; i++)
-+     {
-+      *(pOAM_PADDING_BLOCK_WORD_0(SarBase) + i) = ((i==11)?0x6a6a0000:0x6a6a6a6a);    
-+     }
-+
-+   /* Enable Tx CPPI DMA */
-+   TX_CPPI_CTL_REG(HalDev->dev_base) = 1;
-+   
-+   /* Enable Rx CPPI DMA */
-+   RX_CPPI_CTL_REG(HalDev->dev_base) = 1;
-+
-+   /* +GSG 030306 */
-+   /* Fix for PITS 103 */
-+   /* Enable Host Interrupt for GPR 2 (OAM LB result register) */
-+   SAR_HOST_INT_EN_SET_REG(HalDev->dev_base) |= 0x04000000;
-+   
-+   /* +GSG 030304 to fix PITS 99 (if block is new)*/
-+   if (HalDev->StrictPriority == 1)
-+     {
-+#ifdef __CPHAL_DEBUG
-+      if (DBG(1))
-+        {
-+         dbgPrintf("[aal5->os]IsrRegister(OsDev:%08x, halIsr:%08x, Interrupt:%d)\n",
-+                   (bit32u)HalDev->OsDev, (bit32u)DeviceIntAlt, HalDev->interrupt);
-+         osfuncSioFlush();
-+        }
-+#endif
-+
-+      /* "register" the interrupt handler */
-+      HalDev->OsFunc->IsrRegister(HalDev->OsDev, DeviceIntAlt, HalDev->interrupt);
-+     }
-+    else /* +GSG 030306 */
-+     { /* +GSG 030306 */
-+#ifdef __CPHAL_DEBUG
-+      if (DBG(1))
-+        {
-+         dbgPrintf("[aal5->os]IsrRegister(OsDev:%08x, halIsr:%08x, Interrupt:%d)\n",
-+                   (bit32u)HalDev->OsDev, (bit32u)DeviceInt, HalDev->interrupt);
-+         osfuncSioFlush();
-+        }
-+#endif
-+
-+      /* "register" the interrupt handler */
-+      HalDev->OsFunc->IsrRegister(HalDev->OsDev, DeviceInt, HalDev->interrupt);
-+     } /* +GSG 030306 */
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+/**
-+ *  @ingroup CPHAL_Functions
-+ *  Called to retrigger the interrupt mechanism after packets have been
-+ *  processed.  Call this function when the HalISR function indicates that
-+ *  there is no more work to do.  Proper use of this function will guarantee 
-+ *  that interrupts are never missed.  
-+ *
-+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())  
-+ *
-+ *  @return EC_NO_ERRORS (ok). <BR>
-+ */
-+static int halPacketProcessEnd(HAL_DEVICE *HalDev)
-+  {
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]halPacketProcessEnd(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   SAR_EOI(HalDev->dev_base) = 0;
-+   return (EC_NO_ERRORS);
-+  }
-+
-+/**
-+ *  @ingroup CPHAL_Functions
-+ *  This function probes for the instance of the CPHAL module.  It will call
-+ *  the OS function @c DeviceFindInfo() to get the information required.
-+ *  
-+ *  @param   HalDev      CPHAL module instance. (set by xxxInitModule())
-+ *
-+ *  @return  EC_NO_ERRORS (ok). <BR>
-+ *           Possible Error Codes:<BR>
-+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *           @ref EC_VAL_DEVICE_NOT_FOUND "EC_VAL_DEVICE_NOT_FOUND"<BR>
-+ */
-+static int halProbe(HAL_DEVICE *HalDev)
-+  {
-+   int Ret;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]halProbe(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* Verify hardware state is "enConnected */
-+   if (HalDev->State != enConnected)
-+     return (EC_AAL5|EC_FUNC_PROBE|EC_VAL_INVALID_STATE);
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(1))
-+     {
-+      dbgPrintf("[aal5->os]DeviceFindInfo(Inst:%d, DeviceName:%s, DeviceInfo:%08x)\n",
-+                HalDev->Inst, "aal5", (bit32u)&HalDev->DeviceInfo);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* Attempt to find the device information */
-+   Ret = HalDev->OsFunc->DeviceFindInfo(HalDev->Inst, "aal5", &HalDev->DeviceInfo);
-+   if (Ret)
-+     return(EC_AAL5|EC_FUNC_PROBE|EC_VAL_DEVICE_NOT_FOUND);
-+
-+   /* Call Probe for supporting CPSAR layer */
-+   Ret = HalDev->SarFunc->Probe(HalDev->SarDev);
-+   if (Ret)
-+     return(Ret);
-+
-+   /* Set device state to DevFound */
-+   HalDev->State = enDevFound;
-+
-+   return(EC_NO_ERRORS);    
-+  }
-+
-+/** 
-+ *  @ingroup CPHAL_Functions
-+ *  This function shuts down the CPHAL module completely.  The caller must call
-+ *  Close() to put the device in reset prior shutting down.  This call will free
-+ *  the HalDev and the HAL function pointer structure, effectively ending
-+ *  communications between the driver and the CPHAL.  Further use of the module
-+ *  must be initiated by a call to xxxInitModule(), which starts the entire process
-+ *  over again.
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())  
-+ *
-+ *  @return  EC_NO_ERRORS (ok). <BR>
-+ *           Possible Error Codes:<BR>
-+ *           Any error code from halClose().<BR>
-+ */
-+static int halShutdown(HAL_DEVICE *HalDev)
-+  {
-+   int Ch, Queue;                                                  /*GSG+030514*/
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]halShutdown(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* Verify proper device state */
-+   if (HalDev->State == enOpened)
-+     halClose(HalDev, 3);                                          /*GSG+030429*/
-+
-+   /* Buffer/descriptor resources may still need to be freed if a Close
-+      Mode 1 was performed prior to Shutdown - clean up here */    /*GSG+030514*/
-+   for (Ch=0; Ch<NUM_AAL5_CHAN; Ch++)                                
-+     {                                                             
-+      if (HalDev->RcbStart[Ch] != 0)                           
-+        FreeRx(HalDev,Ch);
-+
-+      for(Queue=0; Queue<MAX_QUEUE; Queue++)
-+        {
-+         if (HalDev->TcbStart[Ch][Queue] != 0)
-+           FreeTx(HalDev,Ch,Queue);
-+        }
-+     }
-+
-+   /* shutdown the CPSAR layer */
-+   HalDev->SarFunc->Shutdown(HalDev->SarDev);
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(6))
-+     {
-+      dbgPrintf("  [aal5 halShutdown()]Free AAL5 function pointers\n");
-+      osfuncSioFlush();
-+     }
-+   if (DBG(1)||DBG(3))
-+     {
-+      dbgPrintf("[aal5->os]Free(MemPtr:%08x)\n", (bit32u)HalDev->HalFuncPtr);
-+      osfuncSioFlush();
-+     }
-+#endif
-+   /* free the HalFunc */
-+   HalDev->OsFunc->Free(HalDev->HalFuncPtr);
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(6))
-+     {
-+      dbgPrintf("  [aal5 halShutdown]Free HalDev\n");
-+      osfuncSioFlush();
-+     }
-+   if (DBG(1)||DBG(3))
-+     {
-+      dbgPrintf("[aal5->os]Free(MemPtr:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+   /* free the HAL device */
-+   HalDev->OsFunc->FreeDev(HalDev);
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+/**
-+ *  @ingroup CPHAL_Functions
-+ *  Used to perform regular checks on the device.  This function should be 
-+ *  called at a regular interval specified by the @c Tick parameter. 
-+ *  
-+ *  @param   HalDev      CPHAL module instance. (set by xxxInitModule())
-+ *
-+ *  @return  EC_NO_ERRORS (ok).<BR>
-+ *           Possible Error Codes:<BR>
-+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ */
-+static int halTick(HAL_DEVICE *HalDev)
-+  {
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[aal5]halTick(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   if (HalDev->State != enOpened)
-+     return(EC_AAL5|EC_FUNC_TICK|EC_VAL_INVALID_STATE);
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+/** 
-+ *  @ingroup CPHAL_Functions
-+ *
-+ *  This function will:
-+ *  -# allocate a HalDev that will be used by the OS for future communications with the device
-+ *  -# save OsDev for use when calling OS functions
-+ *  -# allocate and populate HalFunc with the addresses of CPHAL functions.
-+ *  -# check OsFuncSize to see if it meets the minimum requirement.
-+ *  -# return the size of the HAL_FUNCTIONS structure through the HalFuncSize pointer.  The OS
-+ *     should check this value to ensure that the HAL meets its minimum requirement.
-+ *
-+ *  Version checking between the OS and the CPHAL is done using the OsFuncSize and 
-+ *  HalFuncSize.  Future versions of the CPHAL may add new functions to either
-+ *  HAL_FUNCTIONS or OS_FUNCTIONS, but will never remove functionality.  This enables
-+ *  both the HAL and OS to check the size of the function structure to ensure that
-+ *  the current OS and CPHAL are compatible.
-+ *
-+ *  Note:  This is the only function exported by a CPHAL module. 
-+ *
-+ *  Please refer to the section "@ref hal_init" for example code.
-+ *
-+ *  @param   HalDev  Pointer to pointer to CPHAL module information.  This will 
-+ *                   be used by the OS when communicating to this module via 
-+ *                   CPHAL. Allocated during the call.
-+ *  @param   OsDev   Pointer to OS device information.  This will be saved by
-+ *                   the CPHAL and returned to the OS when required.
-+ *  @param   HalFunc Pointer to pointer to structure containing function pointers for all CPHAL 
-+ *                   interfaces.  Allocated during the call.
-+ *  @param   OsFunc  Pointer to structure containing function pointers for all OS
-+ *                   provided interfaces.  Must be allocated by OS prior to call.
-+ *  @param   OsFuncSize  Size of OS_FUNCTIONS structure.
-+ *  @param   HalFuncSize    Pointer to the size of the HAL_FUNCTIONS structure.
-+ *  @param   Inst    The instance number of the module to initialize. (start at
-+ *                   0).
-+ * 
-+ *  @return  EC_NO_ERRORS (ok). <BR>
-+ *           Possible Error Codes:<BR>
-+ *           @ref EC_VAL_OS_VERSION_NOT_SUPPORTED "EC_VAL_OS_VERSION_NOT_SUPPORTED"<BR>
-+ *           @ref EC_VAL_MALLOC_DEV_FAILED "EC_VAL_MALLOC_DEV_FAILED"<BR>
-+ *           @ref EC_VAL_MALLOC_FAILED "EC_VAL_MALLOC_FAILED"<BR>
-+ */
-+int xxxInitModule(HAL_DEVICE **HalDev, 
-+                 OS_DEVICE *OsDev, 
-+                 HAL_FUNCTIONS **HalFunc, 
-+                 OS_FUNCTIONS *OsFunc, 
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+
-+int cpaal5InitModule(HAL_DEVICE **HalDev, 
-+                 OS_DEVICE *OsDev, 
-+                 HAL_FUNCTIONS **HalFunc, 
-+                 OS_FUNCTIONS *OsFunc, 
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst)
-+  {
-+   int rc, SarFuncSize;
-+   HAL_DEVICE *HalPtr;
-+   HAL_FUNCTIONS *HalFuncPtr;
-+
-+   /* NEW CODE */
-+   if (OsFuncSize < sizeof(OS_FUNCTIONS))
-+     return (EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_OS_VERSION_NOT_SUPPORTED);
-+
-+   HalPtr = (HAL_DEVICE *) OsFunc->MallocDev(sizeof(HAL_DEVICE));
-+   if (!HalPtr)
-+     return (EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_DEV_FAILED);
-+
-+   HalFuncPtr = (HAL_FUNCTIONS *) OsFunc->Malloc(sizeof(HAL_FUNCTIONS));
-+   if (!HalFuncPtr)
-+     return (EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_FAILED);
-+
-+   /* Initialize the size of hal functions */
-+   *HalFuncSize = sizeof (HAL_FUNCTIONS);
-+
-+   /* clear the device structure */
-+   OsFunc->Memset(HalPtr, 0, sizeof(HAL_DEVICE));
-+
-+   /* clear the function pointers */
-+   OsFunc->Memset(HalFuncPtr, 0, sizeof(HAL_FUNCTIONS));
-+
-+   /* initialize the HAL_DEVICE structure */
-+   HalPtr->OsDev  = OsDev;
-+   /*HalPtr->OsOpen = OsDev;*/
-+   HalPtr->Inst   = Inst; 
-+   HalPtr->OsFunc = OsFunc;
-+  
-+   /* Supply pointers for the CPHAL API functions */
-+   HalFuncPtr->RxReturn        = halRxReturn;
-+   HalFuncPtr->Init            = halInit;
-+   HalFuncPtr->Close           = halClose;
-+   HalFuncPtr->Send            = halSend;
-+   HalFuncPtr->ChannelSetup    = halChannelSetup;
-+   HalFuncPtr->ChannelTeardown = halChannelTeardown;
-+   HalFuncPtr->Open            = halOpen;
-+   HalFuncPtr->Kick            = halKick;
-+   HalFuncPtr->RegAccess       = halRegAccess; 
-+   HalFuncPtr->Probe           = halProbe;
-+   HalFuncPtr->Control         = halControl;
-+   HalFuncPtr->Tick            = halTick;
-+   HalFuncPtr->Shutdown        = halShutdown;
-+   HalFuncPtr->OamFuncConfig   = halOamFuncConfig; /* +GSG 030306 */
-+   HalFuncPtr->OamLoopbackConfig   = halOamLoopbackConfig; /* ~GSG 030416 */
-+
-+   /* Temporary */
-+   /*HalFuncPtr->StatsGetOld = StatsGet;*/
-+   HalFuncPtr->PacketProcessEnd = halPacketProcessEnd;
-+
-+   /* Now, AAL5 must connect to the CPSAR layer */
-+
-+   /* Attach to SAR HAL Functions */
-+   /*
-+   cpsarInitModule(NULL, NULL, 0, NULL, &SarFuncSize, Inst);
-+
-+   if (SarFuncSize!=sizeof(CPSAR_FUNCTIONS))
-+    return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_CPSAR_VERSION_NOT_SUPPORTED); 
-+
-+   HalPtr->SarFunc = (CPSAR_FUNCTIONS *) OsFunc->Malloc(SarFuncSize);
-+   */
-+
-+   rc = cpsarInitModule(&HalPtr->SarDev, OsDev, &HalPtr->SarFunc, OsFunc, sizeof(OS_FUNCTIONS), &SarFuncSize, Inst);
-+
-+   /* pass back the error value from the CPSAR layer if necessary */
-+   if (rc)
-+     return(rc);
-+
-+   /*
-+   if (!HalPtr->SarDev)
-+     return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_NULL_CPSAR_DEV);
-+   */
-+
-+   /* Initialize the hardware state */
-+   HalPtr->State = enConnected;
-+
-+   /* keep a reference to HalFuncPtr so I can free it later */
-+   HalPtr->HalFuncPtr = HalFuncPtr;
-+
-+   /* pass the HalPtr back to the caller */
-+   *HalDev = HalPtr;
-+   *HalFunc = HalFuncPtr;
-+
-+   return(EC_NO_ERRORS);
-+  }
-diff -urN linux.old/drivers/atm/sangam_atm/aal5sar.h linux.dev/drivers/atm/sangam_atm/aal5sar.h
---- linux.old/drivers/atm/sangam_atm/aal5sar.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/aal5sar.h	2005-08-23 04:46:50.080846280 +0200
-@@ -0,0 +1,198 @@
-+/**@file************************************************************************
-+ *  TNETDxxxx Software Support
-+ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  FILE:   aal5sar.h
-+ *
-+ *  DESCRIPTION:
-+ *      This file contains data structure definitions for the AAL5 HAL SAR.
-+ *
-+ *  HISTORY:
-+ *      28Feb02 Greg       1.00  Original Version created.
-+ *      06Mar02 Greg       1.01  Documented structures.
-+ *      18Jul02 Greg       1.02  Major reorganization
-+ *
-+ *****************************************************************************/
-+#ifndef _INC_AAL5SAR
-+#define _INC_AAL5SAR
-+
-+/** \namespace AAL5_Version
-+This documents version 01.06.06 of the AAL5 CPHAL.
-+*/
-+const char *pszVersion_CPAAL5="CPAAL5 01.06.06 "__DATE__" "__TIME__;
-+
-+#include "cpsar_cpaal5.h"
-+
-+#define NUM_AAL5_CHAN   16
-+#define MAX_AAL5_CHAN   15
-+#define MAX_QUEUE       2
-+#define MAX_DIRECTION   2
-+
-+#define PKT_TYPE_AAL5   0   /* +GSG 030508 */
-+#define PKT_TYPE_NULL   1   /* +GSG 030508 */
-+#define PKT_TYPE_OAM    2   /* +GSG 030508 */
-+#define PKT_TYPE_TRANS  3   /* +GSG 030508 */
-+#define ATM_HEADER_SIZE 4   /* +GSG 030508 */
-+
-+/*
-+ * HAL Default Parameter Values
-+ */
-+#define CFG_TX_NUM_BUFS   {256,256,256,256,256,256,256,256, 256,256,256,256,256,256,256,256}
-+#define CFG_RX_NUM_BUFS   {256,256,256,256,256,256,256,256, 256,256,256,256,256,256,256,256}
-+#define CFG_RX_BUF_SIZE   {1518,1518,1518,1518,1518,1518,1518,1518, 1518,1518,1518,1518,1518,1518,1518,1518}
-+#define CFG_RX_BUF_OFFSET {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_TX_NUM_QUEUES {1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1}
-+#define CFG_CPCS_UU       {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_DA_MASK       {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_PRIORITY      {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_PKT_TYPE      {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_VCI           {100,101,102,103,104,105,106,107, 108,109,110,111,112,113,114,115}
-+#define CFG_VPI           {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_CELL_RATE     {0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4, 0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4}
-+#define CFG_QOS_TYPE      {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_MBS           {8,8,8,8,8,8,8,8, 8,8,8,8,8,8,8,8}
-+#define CFG_PCR           {1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1}
-+#define CFG_GFC           {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_CLP           {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_PTI           {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_RX_MAX_SERVICE {170,170,170,170,170,170,170,170, 170,170,170,170,170,170,170,170}
-+#define CFG_TX_MAX_SERVICE {170,170,170,170,170,170,170,170, 170,170,170,170,170,170,170,170}
-+
-+static int cfg_tx_num_bufs[NUM_AAL5_CHAN]   = CFG_TX_NUM_BUFS;
-+static int cfg_rx_num_bufs[NUM_AAL5_CHAN]   = CFG_RX_NUM_BUFS;
-+static int cfg_rx_buf_size[NUM_AAL5_CHAN]   = CFG_RX_BUF_SIZE;
-+static int cfg_rx_buf_offset[NUM_AAL5_CHAN] = CFG_RX_BUF_OFFSET;
-+static int cfg_tx_num_queues[NUM_AAL5_CHAN] = CFG_TX_NUM_QUEUES;
-+static bit32u cfg_cpcs_uu[NUM_AAL5_CHAN]    = CFG_CPCS_UU;
-+static int cfg_da_mask[NUM_AAL5_CHAN]       = CFG_DA_MASK;
-+static int cfg_priority[NUM_AAL5_CHAN]      = CFG_PRIORITY;
-+static int cfg_pkt_type[NUM_AAL5_CHAN]      = CFG_PKT_TYPE;
-+static int cfg_vci[NUM_AAL5_CHAN]           = CFG_VCI;
-+static int cfg_vpi[NUM_AAL5_CHAN]           = CFG_VPI;
-+static bit32u cfg_cell_rate[NUM_AAL5_CHAN]  = CFG_CELL_RATE;
-+static int cfg_qos_type[NUM_AAL5_CHAN]      = CFG_QOS_TYPE;
-+static int cfg_mbs[NUM_AAL5_CHAN]           = CFG_MBS;
-+static int cfg_pcr[NUM_AAL5_CHAN]           = CFG_PCR;
-+static int cfg_gfc[NUM_AAL5_CHAN]           = CFG_GFC;
-+static int cfg_clp[NUM_AAL5_CHAN]           = CFG_CLP;
-+static int cfg_pti[NUM_AAL5_CHAN]           = CFG_PTI;
-+static int cfg_rx_max_service[NUM_AAL5_CHAN]= CFG_RX_MAX_SERVICE;
-+static int cfg_tx_max_service[NUM_AAL5_CHAN]= CFG_TX_MAX_SERVICE;
-+static char *channel_names[]   = CHANNEL_NAMES;
-+
-+/*
-+ *  The HAL_FUNCTIONS struct defines the function pointers for all HAL functions
-+ *  accessible to upper layer software.  It is populated by calling
-+ *  halInitModules().
-+ *
-+ *  Note that this list is still under definition.
-+ */
-+
-+/*
-+ *  This is the data structure for a transmit buffer descriptor.  The first
-+ *  four 32-bit words of the BD represent the CPPI 3.0 defined buffer descriptor
-+ *  words.  The other words are SAR/HAL implementation specific.
-+ */
-+typedef struct
-+  {
-+   bit32 HNext;      /**< Hardware's pointer to next buffer descriptor */
-+   bit32 BufPtr;     /**< Pointer to the data buffer */
-+   bit32 Off_BLen;   /**< Contains buffer offset and buffer length */
-+   bit32 mode;       /**< SOP, EOP, Ownership, EOQ, Teardown Complete bits */
-+   bit32 AtmHeader;  /**< Atm Header to be used for each fragment */
-+   bit32 Word5;      /**< General control information for the packet */
-+   bit32 Res6;
-+   bit32 Res7;
-+   void *Next;
-+   void *OsInfo;
-+#ifdef __CPHAL_DEBUG
-+   bit32 DbgSop;
-+   bit32 DbgData;
-+   bit32 DbgFraglist;
-+#endif
-+   void *Eop;
-+  }HAL_TCB;
-+
-+/*
-+ *  This is the data structure for a receive buffer descriptor.  The first
-+ *  six 32-bit words of the BD represent the CPPI 3.0 defined buffer descriptor
-+ *  words.  The other words are HAL implementation specific.
-+ */
-+typedef volatile struct hal_private
-+  {
-+  bit32 HNext;      /**< Hardware's pointer to next buffer descriptor */
-+  bit32 BufPtr;     /**< Pointer to the data buffer */
-+  bit32 Off_BLen;   /**< Contains buffer offset and buffer length */
-+  bit32 mode;       /**< SOP, EOP, Ownership, EOQ, Teardown, Q Starv, Length */
-+  bit32 AtmHeader;
-+  bit32 UuCpi;
-+  bit32 Res6;
-+  bit32 Res7;
-+  void *DatPtr;
-+  void *Next;
-+  void *OsInfo;
-+  void *Eop;
-+  bit32 FragCount;
-+  bit32 Ch;
-+  HAL_DEVICE *HalDev;
-+  }HAL_RCB;
-+
-+
-+#define MAX_NEEDS 512                                             /*MJH+030409*/
-+/*
-+ *  This is the data structure for a generic HAL device.  It contains all device
-+ *  specific data for a single instance of that device.  This includes Rx/Tx
-+ *  buffer queues, device base address, reset bit, and other information.
-+ */
-+typedef struct hal_device
-+  {
-+  HAL_RCB *RcbPool[NUM_AAL5_CHAN];
-+  bit32u rxbufseq;
-+  bit32 RxActQueueCount[NUM_AAL5_CHAN];
-+  HAL_RCB *RxActQueueHead[NUM_AAL5_CHAN];
-+  HAL_RCB *RxActQueueTail[NUM_AAL5_CHAN];
-+  bit32 RxActive[NUM_AAL5_CHAN];
-+  bit32 dev_base;
-+  HAL_TCB *TcbPool[NUM_AAL5_CHAN][MAX_QUEUE];
-+  bit32 offset;
-+  bit32 TxActQueueCount[NUM_AAL5_CHAN][MAX_QUEUE];
-+  HAL_TCB *TxActQueueHead[NUM_AAL5_CHAN][MAX_QUEUE];
-+  HAL_TCB *TxActQueueTail[NUM_AAL5_CHAN][MAX_QUEUE];
-+  bit32 TxActive[NUM_AAL5_CHAN][MAX_QUEUE];
-+  bit32 TxTeardownPending[NUM_AAL5_CHAN];
-+  bit32 RxTeardownPending[NUM_AAL5_CHAN];
-+  bit32 ChIsOpen[NUM_AAL5_CHAN][MAX_DIRECTION];
-+  bit32 ChIsSetup[NUM_AAL5_CHAN][MAX_DIRECTION];
-+  bit32 interrupt;
-+  bit32 debug;
-+  OS_DEVICE *OsDev;
-+  OS_FUNCTIONS *OsFunc;
-+  CPSAR_FUNCTIONS *SarFunc;
-+  CPSAR_DEVICE *SarDev;
-+  /*void *OsOpen;*/
-+    /*FRAGLIST fraglist[MAX_FRAG];*/
-+  FRAGLIST *fraglist;
-+  char *TcbStart[NUM_AAL5_CHAN][MAX_QUEUE];
-+  char *RcbStart[NUM_AAL5_CHAN];
-+    /*bit32 RcbSize[NUM_AAL5_CHAN];*/
-+  bit32 InRxInt[NUM_AAL5_CHAN];
-+  STAT_INFO Stats;
-+  bit32  Inst;
-+  bit32u DeviceCPID[4];
-+  bit32u LBSourceLLID[4];
-+  CHANNEL_INFO ChData[NUM_AAL5_CHAN];
-+  DEVICE_STATE State;
-+  char *DeviceInfo;
-+  HAL_FUNCTIONS *HalFuncPtr;
-+  int NextRxCh;
-+  int NextTxCh[2];
-+  int StrictPriority; /* +GSG 030304 */
-+  bit32u NeedsCount;                                              /*MJH+030409*/
-+  HAL_RECEIVEINFO *Needs[MAX_NEEDS];                              /*MJH+030409*/
-+  bit32u SarFrequency;  /* +GSG 030416 */
-+  int MaxFrags;
-+  bit32u TurboDslErrors;
-+  bit32u OamLbTimeout;
-+  }HALDEVICE;
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.c linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.c
---- linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.c	2005-08-23 04:46:50.081846128 +0200
-@@ -0,0 +1,728 @@
-+#ifndef _INC_CPCOMMON_C
-+#define _INC_CPCOMMON_C
-+
-+#ifdef _CPHAL_CPMAC
-+#include "cpremap_cpmac.c"
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+#include "cpremap_cpaal5.c"
-+#endif
-+
-+#ifdef _CPHAL_CPSAR
-+#include "cpremap_cpsar.c"
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+#include "cpremap_cpaal2.c"
-+#endif
-+
-+/**
-+@defgroup Common_Config_Params Common Configuration Parameters
-+
-+This section documents the configuration parameters that are valid across
-+all CPHAL devices.
-+@{
-+*/
-+/** This is the debug level.  The field is bit defined, such that the user
-+should set to 1 all the bits corresponding to desired debug outputs.  The following 
-+are the meanings for each debug bit:
-+- bit0 (LSB): CPHAL Function Trace
-+- b1 : OS Function call trace
-+- b2 : Critical section entry/exit
-+- b3 : Memory allocation/destruction
-+- b4 : Detailed information in Rx path
-+- b5 : Detailed information in Tx path
-+- b6 : Extended error information
-+- b7 : General info
-+*/
-+static const char pszDebug[]        = "debug";
-+/** CPU Frequency. */
-+/*static const char pszCpuFreq[]      = "CpuFreq";*/               /*MJH-030403*/
-+/** Base address for the module. */
-+static const char pszBase[]         = "base";
-+/** Reset bit for the module. */
-+static const char pszResetBit[]     = "reset_bit";
-+/** Reset base address for the module. */
-+static const char pszResetBase[]    = "ResetBase";
-+/** Interrupt line for the module. */
-+static const char pszIntLine[]      = "int_line";
-+/** VLYNQ offset for the module.  Disregard if not using VLYNQ. */
-+static const char pszOffset[]       = "offset";
-+/** The OS may "Get" this parameter, which is a pointer
-+    to a character string that indicates the version of CPHAL. */
-+static const char pszVer[]          = "Version";
-+/*@}*/
-+
-+/**
-+@defgroup Common_Control_Params Common Keys for [os]Control()
-+
-+This section documents the keys used with the OS @c Control() interface that
-+are required by CPHAL devices.
-+
-+@{
-+*/
-+/** Used to wait for an integer number of clock ticks, given as an integer
-+    pointer in the @p Value parameter.  No actions are defined. */
-+static const char pszSleep[]             = "Sleep";
-+/** Requests the OS to flush it's IO buffers.  No actions are defined. */
-+static const char pszSioFlush[]          = "SioFlush";
-+/*@}*/
-+
-+static const char pszStateChange[]       = "StateChange";
-+static const char pszStatus[]            = "Status";
-+
-+static const char pszGET[]               = "Get";
-+static const char pszSET[]               = "Set";
-+static const char pszCLEAR[]             = "Clear";
-+static const char pszNULL[]              = "";
-+static const char pszLocator[]           = "Locator";
-+static const char pszOff[]               = "Off";
-+static const char pszOn[]                = "On";
-+static const char hcMaxFrags[]           = "MaxFrags";
-+
-+#ifdef _CPHAL_CPMAC
-+
-+/*  New method for string constants */
-+const char hcClear[]  = "Clear";
-+const char hcGet[]    = "Get";
-+const char hcSet[]    = "Set";
-+
-+const char hcTick[]   = "Tick";
-+
-+static const CONTROL_KEY KeyCommon[] =
-+   {
-+     {""                   , enCommonStart},
-+     {pszStatus            , enStatus},
-+     {pszOff               , enOff},
-+     {pszOn                , enOn},
-+     {pszDebug             , enDebug},
-+     {hcCpuFrequency       , enCpuFreq},                           /*MJH~030403*/
-+     {""                   , enCommonEnd}
-+   };
-+#endif
-+
-+/**
-+@defgroup Common_Statistics Statistics
-+
-+A broad array of module statistics is available.  Statistics values are accessed
-+through the @c Control() interface of the CPHAL.  There are 5 different levels
-+of statistics, each of which correspond to a unique set of data.  Furthermore,
-+certain statistics data is indexed by using a channel number and Tx queue number.
-+The following is a brief description of each statistics level, along with the
-+indexes used for the level:
-+
-+- Level 0:  Hardware Statistics (index with channel)
-+- Level 1:  CPHAL Software Statistics (channel, queue)
-+- Level 2:  CPHAL Flags (channel, queue)
-+- Level 3:  CPHAL Channel Configuration (channel)
-+- Level 4:  CPHAL General Configuration (no index)
-+
-+The caller requests statistics information by providing a Key string to the
-+@c Control() API in the following format: "Stats;[Level #];[Ch #];[Queue #]".
-+The only valid Action parameter for statistics usage is "Get".
-+
-+Code Examples:
-+@code
-+unsigned int *StatsData;
-+
-+# Get Level 0 stats for Channel 1
-+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
-+
-+# Get Level 2 stats for Channel 0, Queue 0
-+HalFunc->Control(OsDev->HalDev, "Stats;2;0;0", "Get", &StatsData);
-+
-+# Get Level 4 stats
-+HalFunc->Control(OsDev->HalDev, "Stats;4", "Get", &StatsData);
-+@endcode
-+
-+The information returned in the Value parameter of @c Control() is an
-+array of pointers to strings.  The pointers are arranged in pairs.
-+The first pointer is a pointer to a name string for a particular statistic.
-+The next pointer is a pointer to a string containing the representation of
-+the integer statistic value corresponding to the first pointer.  This is followed
-+by another pair of pointers, and so on, until a NULL pointer is encountered.  The
-+following is example code for processing the statistics data.  Note that the OS
-+is responsible for freeing the memory passed back through the Value parameter of
-+@c Control().
-+
-+@code
-+unsigned int *StatsData;
-+
-+# Get Level 0 stats for Channel 1
-+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
-+
-+# output Statistics data
-+PrintStats(StatsData);
-+
-+# the upper layer is responsible for freeing stats info
-+free(&StatsPtr);
-+
-+...
-+
-+void PrintStats(unsigned int *StatsPtr)
-+  {
-+   while(*StatsPtr)
-+     {
-+      printf("%20s:",  (char *)*StatsPtr);
-+      StatsPtr++;
-+      printf("%11s\n", (char *)*StatsPtr);
-+      StatsPtr++;
-+     }
-+   MySioFlush();
-+  }
-+@endcode
-+
-+Within each statistics level, there are several statistics defined.  The statistics that
-+are common to every CPPI module are listed below.  In addition, each module may define
-+extra statistics in each level, which will be documented within the module-specific
-+documentation appendices.
-+
-+- Level 0 Statistics
-+  - All level 0 statistics are module-specific.
-+- Level 1 Statistics (CPHAL Software Statistics)
-+  - DmaLenErrors: Incremented when the port DMA's more data than expected (per channel). (AAL5 Only)
-+  - TxMisQCnt: Incremented when host queues a packet for transmission as the port finishes
-+transmitting the previous last packet in the queue (per channel and queue).
-+  - RxMisQCnt: Incremented when host queues adds buffers to a queue as the port finished the
-+reception of the previous last packet in the queue (per channel).
-+  - TxEOQCnt: Number of times the port has reached the end of the transmit queue (per channel and queue).
-+  - RxEOQCnt: Number of times the port has reached the end of the receive queue (per channel).
-+  - RxPacketsServiced: Number of received packets (per channel).
-+  - TxPacketsServiced: Number of transmitted packets (per channel and queue).
-+  - RxMaxServiced: Maximum number of packets that the CPHAL receive interrupt has serviced at a time (per channel).
-+  - TxMaxServiced: Maximum number of packets that the CPHAL transmit interrupt has serviced at a time (per channel and queue).
-+  - RxTotal: Total number of received packets, all channels.
-+  - TxTotal: Total number of transmitted packets, all channels and queues.
-+- Level 2 Statistics (CPHAL Flags)
-+  - RcbPool: Pointer to receive descriptor pool (per channel).
-+  - RxActQueueCount: Number of buffers currently available for receive (per channel).
-+  - RxActQueueHead: Pointer to first buffer in receive queue (per channel).
-+  - RxActQueueTail: Pointer to last buffer in receive queue (per channel).
-+  - RxActive: 0 if inactive (no buffers available), or 1 if active (buffers available).
-+  - RcbStart: Pointer to block of receive descriptors.
-+  - RxTeardownPending: 1 if Rx teardown is pending but incomplete, 0 otherwise.
-+  - TcbPool: Pointer to transmit descriptor pool (per channel and queue).
-+  - TxActQueueCount: Number of buffers currently queued to be transmitted (per channel and queue).
-+  - TxActQueueHead: Pointer to first buffer in transmit queue (per channel and queue).
-+  - TxActQueueTail: Pointer to last buffer in transmit queue (per channel and queue).
-+  - TxActive: 0 if inactive (no buffers to send), or 1 if active (buffers queued to send).
-+  - TcbStart: Pointer to block of transmit descriptors.
-+  - TxTeardownPending: 1 if Tx teardown is pending but incomplete, 0 otherwise.
-+- Level 3 Statistics (CPHAL Channel Configuration)
-+  - RxBufSize: Rx buffer size.
-+  - RxBufferOffset: Rx buffer offset.
-+  - RxNumBuffers: Number of Rx buffers.
-+  - RxServiceMax: Maximum number of receive packets to service at a time.
-+  - TxNumBuffers: Number of Tx buffer descriptors.
-+  - TxNumQueues: Number of Tx queues to use.
-+  - TxServiceMax: Maximum number of transmit packets to service at a time.
-+- Level 4 Statistics (CPHAL General Configuration)
-+  - Base Address: Base address of the module.
-+  - Offset (VLYNQ): VLYNQ relative module offset.
-+  - Interrupt Line: Interrupt number.
-+  - Debug: Debug flag, 1 to enable debug.
-+  - Inst: Instance number.
-+*/
-+
-+/* 
-+   Data Type 0 = int display
-+   Data Type 1 = hex display
-+   Data Type 2 = channel structure, int display
-+   Data Type 3 = queue index and int display
-+   Data Type 4 = queue index and hex display
-+*/
-+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) /* +GSG 030307 */
-+static STATS_TABLE StatsTable0[] =
-+  {
-+#ifdef _CPHAL_AAL5
-+   /* Name ,        Data Ptr,   Data Type */
-+   {"Crc Errors",          0,          0},
-+   {"Len Errors",          0,          0},
-+   {"Abort Errors",        0,          0},
-+   {"Starv Errors",        0,          0}
-+#endif
-+#ifdef _CPHAL_CPMAC
-+   {"Rx Good Frames",      0,          0}
-+#endif
-+  };
-+
-+static STATS_TABLE StatsTable1[] =
-+  {
-+   /* Name ,        Data Ptr,   Data Type */
-+   {"DmaLenErrors",        0,          0},
-+   {"TxMisQCnt",           0,          3},
-+   {"RxMisQCnt",           0,          0},
-+   {"TxEOQCnt",            0,          3},
-+   {"RxEOQCnt",            0,          0},
-+   {"RxPacketsServiced",   0,          0},
-+   {"TxPacketsServiced",   0,          3},
-+   {"RxMaxServiced",       0,          0},
-+   {"TxMaxServiced",       0,          3},
-+   {"RxTotal",             0,          0},
-+   {"TxTotal",             0,          0},
-+  };
-+
-+static STATS_TABLE StatsTable2[] =
-+  {
-+   /* Name ,        Data Ptr,   Data Type */
-+   {"RcbPool",             0,          1},
-+   {"RxActQueueCount",     0,          0},
-+   {"RxActQueueHead",      0,          1},
-+   {"RxActQueueTail",      0,          1},
-+   {"RxActive",            0,          0},
-+   {"RcbStart",            0,          1},
-+   {"RxTeardownPending",   0,          0},
-+   {"TcbPool",             0,          4},
-+   {"TxActQueueCount",     0,          3},
-+   {"TxActQueueHead",      0,          4},
-+   {"TxActQueueTail",      0,          4},
-+   {"TxActive",            0,          3},
-+   {"TcbStart",            0,          4},
-+   {"TxTeardownPending",   0,          0}
-+  };
-+
-+static STATS_TABLE StatsTable3[] =
-+  {
-+   /* Name ,        Data Ptr,   Data Type */
-+   {"RxBufSize",           0,          2},
-+   {"RxBufferOffset",      0,          2},
-+   {"RxNumBuffers",        0,          2},
-+   {"RxServiceMax",        0,          2},
-+   {"TxNumBuffers",        0,          2},
-+   {"TxNumQueues",         0,          2},
-+   {"TxServiceMax",        0,          2},
-+#ifdef _CPHAL_AAL5
-+   {"CpcsUU",              0,          2},
-+   {"Gfc",                 0,          2},
-+   {"Clp",                 0,          2},
-+   {"Pti",                 0,          2},
-+   {"DaMask",              0,          2},
-+   {"Priority",            0,          2},
-+   {"PktType",             0,          2},
-+   {"Vci",                 0,          2},
-+   {"Vpi",                 0,          2},
-+   {"CellRate",            0,          2},
-+   {"QosType",             0,          2},
-+   {"Mbs",                 0,          2},
-+   {"Pcr",                 0,          2}
-+#endif
-+  };
-+
-+static STATS_TABLE StatsTable4[] =
-+  {
-+   {"Base Address",        0,          1},
-+   {"Offset (VLYNQ)",      0,          0},
-+   {"Interrupt Line",      0,          0},
-+   {"Debug",               0,          0},
-+   {"Instance",            0,          0},
-+#ifdef _CPHAL_AAL5
-+   {"UniNni",              0,          0}
-+#endif
-+  };
-+
-+static STATS_DB StatsDb[] =
-+  {
-+    {(sizeof(StatsTable0)/sizeof(STATS_TABLE)), StatsTable0},
-+    {(sizeof(StatsTable1)/sizeof(STATS_TABLE)), StatsTable1},
-+    {(sizeof(StatsTable2)/sizeof(STATS_TABLE)), StatsTable2},
-+    {(sizeof(StatsTable3)/sizeof(STATS_TABLE)), StatsTable3},
-+    {(sizeof(StatsTable4)/sizeof(STATS_TABLE)), StatsTable4}
-+  };
-+#endif /* +GSG 030307 */
-+
-+#ifdef _CPHAL_CPMAC /* +RC 3.02 */
-+static void resetWait(HAL_DEVICE *HalDev)
-+  {                                                                  /*+RC3.02*/
-+  const int TickReset=64;
-+  osfuncSleep((int*)&TickReset);
-+  }                                                                  /*+RC3.02*/
-+#endif /* +RC 3.02 */
-+
-+/* I only define the reset base function for the modules
-+   that can perform a reset.  The AAL5 and AAL2 modules
-+   do not perform a reset, that is done by the shared module
-+   CPSAR */
-+#if defined(_CPHAL_CPSAR) || defined(_CPHAL_CPMAC) || defined(_CPHAL_VDMAVT)
-+/*
-+ *  Determines the reset register address to be used for a particular device.
-+ *  It will search the current device entry for Locator information.  If the
-+ *  device is a root device, there will be no Locator information, and the
-+ *  function will find and return the root reset register.  If a Locator value
-+ *  is found, the function will search each VLYNQ device entry in the system
-+ *  looking for a matching Locator.  Once it finds a VLYNQ device entry with
-+ *  a matching Locator, it will extract the "ResetBase" parameter from that
-+ *  VLYNQ device entry (thus every VLYNQ entry must have the ResetBase parameter).
-+ *
-+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *  @param  ResetBase Pointer to integer address of reset register.
-+ *
-+ *  @return 0 OK, Non-zero not OK
-+ */
-+static int ResetBaseGet(HAL_DEVICE *HalDev, bit32u *ResetBase)
-+  {
-+   char *DeviceInfo = HalDev->DeviceInfo;
-+   char *MyLocator, *NextLocator;
-+   int Inst=1;
-+   bit32u error_code;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpcommon]ResetBaseGet(HalDev:%08x, ResetBase:%08x)\n", (bit32u)HalDev, ResetBase);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &MyLocator);
-+   if (error_code)
-+     {
-+      /* if no Locator value, device is on the root, so get the "reset" device */
-+      error_code = HalDev->OsFunc->DeviceFindInfo(0, "reset", &DeviceInfo);
-+      if  (error_code)
-+        {
-+         return(EC_VAL_DEVICE_NOT_FOUND);
-+        }
-+
-+      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "base", ResetBase);
-+      if (error_code)
-+        {
-+         return(EC_VAL_BASE_ADDR_NOT_FOUND);
-+        }
-+
-+      *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
-+
-+      /* found base address for root device, so we're done */
-+      return (EC_NO_ERRORS);
-+     }
-+    else
-+     {
-+      /* we have a Locator value, so the device is remote */
-+
-+      /* Find a vlynq device with a matching locator value */
-+      while ((HalDev->OsFunc->DeviceFindInfo(Inst, "vlynq", &DeviceInfo)) == EC_NO_ERRORS)
-+        {
-+         error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &NextLocator);
-+         if (error_code)
-+           {
-+            /* no Locator value for this VLYNQ, so move on */
-+            continue;
-+           }
-+         if (HalDev->OsFunc->Strcmpi(MyLocator, NextLocator)==0)
-+           {
-+            /* we have found a VLYNQ with a matching Locator, so extract the ResetBase */
-+            error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "ResetBase", ResetBase);
-+            if (error_code)
-+              {
-+               return(EC_VAL_BASE_ADDR_NOT_FOUND);
-+              }
-+            *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
-+
-+            /* found base address for root device, so we're done */
-+            return (EC_NO_ERRORS);
-+           }
-+         Inst++;
-+        } /* while */
-+     } /* else */
-+
-+   return (EC_NO_ERRORS);
-+  }
-+#endif
-+
-+#ifndef _CPHAL_AAL2 /* + RC 3.02 */
-+static bit32u ConfigGetCommon(HAL_DEVICE *HalDev)
-+  {
-+   bit32u ParmValue;
-+   bit32 error_code;
-+   char *DeviceInfo = HalDev->DeviceInfo;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpcommon]ConfigGetCommon(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszBase, &ParmValue);
-+   if (error_code)
-+     {
-+      return(EC_FUNC_HAL_INIT|EC_VAL_BASE_ADDR_NOT_FOUND);
-+     }
-+   HalDev->dev_base = ((bit32u)PhysToVirtNoCache(ParmValue));
-+
-+#ifndef _CPHAL_AAL5
-+#ifndef _CPHAL_AAL2
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszResetBit, &ParmValue);
-+   if(error_code)
-+     {
-+      return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BIT_NOT_FOUND);
-+     }
-+   HalDev->ResetBit = ParmValue;
-+
-+   /* Get reset base address */
-+   error_code = ResetBaseGet(HalDev, &ParmValue);
-+   if (error_code)
-+     return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BASE_NOT_FOUND);
-+   HalDev->ResetBase = ParmValue;
-+#endif
-+#endif
-+
-+#ifndef _CPHAL_CPSAR
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszIntLine,&ParmValue);
-+   if (error_code)
-+     {
-+      return(EC_FUNC_HAL_INIT|EC_VAL_INTERRUPT_NOT_FOUND);
-+     }
-+   HalDev->interrupt = ParmValue;
-+#endif
-+
-+   /* only look for the offset if there is a Locator field, which indicates that
-+      the module is a VLYNQ module */
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszLocator,&ParmValue);
-+   if (!error_code)
-+     {
-+      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszOffset,&ParmValue);
-+      if (error_code)
-+        {
-+         return(EC_FUNC_HAL_INIT|EC_VAL_OFFSET_NOT_FOUND);
-+        }
-+      HalDev->offset = ParmValue;
-+     }
-+    else
-+      HalDev->offset = 0;
-+
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszDebug, &ParmValue);
-+   if (!error_code) HalDev->debug = ParmValue;
-+
-+   return (EC_NO_ERRORS);
-+  }
-+#endif /* +RC 3.02 */
-+
-+#ifdef _CPHAL_CPMAC /* +RC 3.02 */
-+static void StatsInit(HAL_DEVICE *HalDev)                             /* +() RC3.02 */
-+  {
-+   /* even though these statistics may be for multiple channels and
-+      queues, i need only configure the pointer to the beginning
-+      of the array, and I can index from there if necessary */
-+
-+#ifdef _CPHAL_AAL5
-+   StatsTable0[0].StatPtr  = &HalDev->Stats.CrcErrors[0];
-+   StatsTable0[1].StatPtr  = &HalDev->Stats.LenErrors[0];
-+   StatsTable0[2].StatPtr  = &HalDev->Stats.AbortErrors[0];
-+   StatsTable0[3].StatPtr  = &HalDev->Stats.StarvErrors[0];
-+
-+   StatsTable1[0].StatPtr  = &HalDev->Stats.DmaLenErrors[0];
-+   StatsTable1[1].StatPtr  = &HalDev->Stats.TxMisQCnt[0][0];
-+   StatsTable1[2].StatPtr  = &HalDev->Stats.RxMisQCnt[0];
-+   StatsTable1[3].StatPtr  = &HalDev->Stats.TxEOQCnt[0][0];
-+   StatsTable1[4].StatPtr  = &HalDev->Stats.RxEOQCnt[0];
-+   StatsTable1[5].StatPtr  = &HalDev->Stats.RxPacketsServiced[0];
-+   StatsTable1[6].StatPtr  = &HalDev->Stats.TxPacketsServiced[0][0];
-+   StatsTable1[7].StatPtr  = &HalDev->Stats.RxMaxServiced;
-+   StatsTable1[8].StatPtr  = &HalDev->Stats.TxMaxServiced[0][0];
-+   StatsTable1[9].StatPtr  = &HalDev->Stats.RxTotal;
-+   StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal;
-+#endif
-+
-+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC))
-+   StatsTable2[0].StatPtr  = (bit32u *)&HalDev->RcbPool[0];
-+   StatsTable2[1].StatPtr  = &HalDev->RxActQueueCount[0];
-+   StatsTable2[2].StatPtr  = (bit32u *)&HalDev->RxActQueueHead[0];
-+   StatsTable2[3].StatPtr  = (bit32u *)&HalDev->RxActQueueTail[0];
-+   StatsTable2[4].StatPtr  = &HalDev->RxActive[0];
-+   StatsTable2[5].StatPtr  = (bit32u *)&HalDev->RcbStart[0];
-+   StatsTable2[6].StatPtr  = &HalDev->RxTeardownPending[0];
-+   StatsTable2[7].StatPtr  = (bit32u *)&HalDev->TcbPool[0][0];
-+   StatsTable2[8].StatPtr  = &HalDev->TxActQueueCount[0][0];
-+   StatsTable2[9].StatPtr  = (bit32u *)&HalDev->TxActQueueHead[0][0];
-+   StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0];
-+   StatsTable2[11].StatPtr = &HalDev->TxActive[0][0];
-+   StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0];
-+   StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0];
-+
-+   StatsTable3[0].StatPtr  = &HalDev->ChData[0].RxBufSize;
-+   StatsTable3[1].StatPtr  = &HalDev->ChData[0].RxBufferOffset;
-+   StatsTable3[2].StatPtr  = &HalDev->ChData[0].RxNumBuffers;
-+   StatsTable3[3].StatPtr  = &HalDev->ChData[0].RxServiceMax;
-+   StatsTable3[4].StatPtr  = &HalDev->ChData[0].TxNumBuffers;
-+   StatsTable3[5].StatPtr  = &HalDev->ChData[0].TxNumQueues;
-+   StatsTable3[6].StatPtr  = &HalDev->ChData[0].TxServiceMax;
-+#ifdef _CPHAL_AAL5
-+   StatsTable3[7].StatPtr  = &HalDev->ChData[0].CpcsUU;
-+   StatsTable3[8].StatPtr  = &HalDev->ChData[0].Gfc;
-+   StatsTable3[9].StatPtr  = &HalDev->ChData[0].Clp;
-+   StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti;
-+   StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask;
-+   StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority;
-+   StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType;
-+   StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci;
-+   StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi;
-+   StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate;
-+   StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType;
-+   StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs;
-+   StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr;
-+#endif
-+#endif
-+
-+   StatsTable4[0].StatPtr  = &HalDev->dev_base;
-+   StatsTable4[1].StatPtr  = &HalDev->offset;
-+   StatsTable4[2].StatPtr  = &HalDev->interrupt;
-+   StatsTable4[3].StatPtr  = &HalDev->debug;
-+   StatsTable4[4].StatPtr  = &HalDev->Inst;
-+  }
-+#endif /* +RC 3.02 */
-+
-+#ifndef _CPHAL_CPSAR /* +RC 3.02 */
-+#ifndef _CPHAL_AAL2 /* +RC 3.02 */
-+/*
-+ *  Returns statistics information.
-+ *
-+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *
-+ *  @return 0
-+ */
-+static int StatsGet(HAL_DEVICE *HalDev, void **StatPtr, int Index, int Ch, int Queue)
-+  {
-+   int Size;
-+   bit32u *AddrPtr;
-+   char *DataPtr;
-+   STATS_TABLE *StatsTable;
-+   int i, NumberOfStats;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpcommon]StatsGet(HalDev:%08x, StatPtr:%08x)\n",
-+                (bit32u)HalDev, (bit32u)StatPtr);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   StatsTable = StatsDb[Index].StatTable;
-+   NumberOfStats = StatsDb[Index].NumberOfStats;
-+
-+   Size = sizeof(bit32u)*((NumberOfStats*2)+1);
-+   Size += (NumberOfStats*11);
-+   *StatPtr = (bit32u *)HalDev->OsFunc->Malloc(Size);
-+
-+   AddrPtr = (bit32u *) *StatPtr;
-+   DataPtr = (char *)AddrPtr;
-+   DataPtr += sizeof(bit32u)*((NumberOfStats*2)+1);
-+
-+   for (i=0; i<NumberOfStats; i++)
-+     {
-+      *AddrPtr++ = (bit32u)StatsTable[i].StatName;
-+      *AddrPtr++ = (bit32u)DataPtr;
-+      if (&StatsTable[i].StatPtr[Ch] != 0)
-+        {
-+         switch(StatsTable[i].DataType)
-+           {
-+            case 0:
-+              HalDev->OsFunc->Sprintf(DataPtr, "%d", (bit32u *)StatsTable[i].StatPtr[Ch]);
-+              break;
-+            case 1:
-+              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", (bit32u *)StatsTable[i].StatPtr[Ch]);
-+              break;
-+            case 2:
-+              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch * (sizeof(CHANNEL_INFO)/4))));
-+              break;
-+            case 3:
-+              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
-+              break;
-+            case 4:
-+              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
-+              break;
-+            default:
-+              /* invalid data type, due to CPHAL programming error */
-+              break;
-+           }
-+        }
-+       else
-+        {
-+         /* invalid statistics pointer, probably was not initialized */
-+        }
-+      DataPtr += HalDev->OsFunc->Strlen(DataPtr) + 1;
-+     }
-+
-+   *AddrPtr = (bit32u) 0;
-+
-+   return (EC_NO_ERRORS);
-+  }
-+#endif /* +RC 3.02 */
-+#endif /* +RC 3.02 */
-+
-+#ifdef _CPHAL_CPMAC
-+static void gpioFunctional(int base, int bit)
-+  {                                                                  /*+RC3.02*/
-+  bit32u GpioEnr = base + 0xC;
-+  /*  To make functional, set to zero  */
-+  *(volatile bit32u *)(GpioEnr) &= ~(1 << bit);                      /*+RC3.02*/
-+  }                                                                  /*+RC3.02*/
-+
-+
-+/*+RC3.02*/
-+/* Common function, Checks to see if GPIO should be in functional mode */
-+static void gpioCheck(HAL_DEVICE *HalDev, void *moduleDeviceInfo)
-+  {                                                                  /*+RC3.02*/
-+  int rc;
-+  void *DeviceInfo;
-+  char *pszMuxBits;
-+  char pszMuxBit[20];
-+  char *pszTmp;
-+  char szMuxBit[20];
-+  char *ptr;
-+  int base;
-+  int reset_bit;
-+  int bit;
-+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+
-+  rc = OsFunc->DeviceFindParmValue(moduleDeviceInfo, "gpio_mux",&pszTmp);
-+  if(rc) return;
-+  /*  gpio entry found, get GPIO register info and make functional  */
-+
-+  /* temp copy until FinParmValue fixed */
-+  ptr = &szMuxBit[0];
-+  while ((*ptr++ = *pszTmp++));
-+
-+  pszMuxBits = &szMuxBit[0];
-+
-+  rc = OsFunc->DeviceFindInfo(0,"gpio",&DeviceInfo);
-+  if(rc) return;
-+
-+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",&base);
-+  if(rc) return;
-+
-+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit);
-+  if(rc) return;
-+
-+  /* If GPIO still in reset, then exit  */
-+  if((VOLATILE32(HalDev->ResetBase) & (1 << reset_bit)) == 0)
-+    return;
-+  /*  format for gpio_mux is  gpio_mux = <int>;<int>;<int>...*/
-+  while (*pszMuxBits)
-+    {
-+    pszTmp = &pszMuxBit[0];
-+    if(*pszMuxBits == ';') pszMuxBits++;
-+    while ((*pszMuxBits != ';') && (*pszMuxBits != '\0'))
-+      {
-+      osfuncSioFlush();
-+      /*If value not a number, skip */
-+      if((*pszMuxBits < '0') || (*pszMuxBits > '9'))
-+        pszMuxBits++;
-+      else
-+        *pszTmp++ = *pszMuxBits++;
-+      }
-+    *pszTmp = '\0';
-+    bit = OsFunc->Strtoul(pszMuxBit, &pszTmp, 10);
-+    gpioFunctional(base, bit);
-+    resetWait(HalDev);  /* not sure if this is needed */
-+    }
-+  }                                                                  /*+RC3.02*/
-+#endif  /* CPMAC  */
-+
-+#ifdef _CPHAL_AAL5
-+const char hcSarFrequency[] = "SarFreq";
-+#endif
-+
-+#endif  /* _INC  */
-diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.h linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.h
---- linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.h	2005-08-23 04:46:50.082845976 +0200
-@@ -0,0 +1,79 @@
-+#ifndef _INC_CPCOMMON_H
-+#define _INC_CPCOMMON_H
-+
-+#define VOLATILE32(addr)  (*(volatile bit32u *)(addr))
-+#ifndef dbgPrintf
-+#define dbgPrintf HalDev->OsFunc->Printf
-+#endif
-+
-+#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field
-+
-+#define DBG(level)  (HalDev->debug & (1<<(level)))
-+/*
-+#define DBG0()      DBG(0)
-+#define DBG1()      DBG(1)
-+#define DBG2()      DBG(2)
-+#define DBG3()      DBG(3)
-+#define DBG4()      DBG(4)
-+#define DBG5()      DBG(5)
-+#define DBG6()      DBG(6)
-+#define DBG7()      DBG(7)
-+*/
-+
-+/*
-+ *  List of defined actions for use with Control().
-+ */
-+typedef enum 
-+  {
-+   enGET=0,     /**< Get the value associated with a key */
-+   enSET,       /**< Set the value associates with a key */
-+   enCLEAR,     /**<Clear the value */ 
-+   enNULL       /**< No data action, used to initiate a service or send a message */
-+  }ACTION;
-+
-+/*
-+ *  Enumerated hardware states.
-+ */
-+typedef enum
-+  {
-+   enConnected=1, enDevFound, enInitialized, enOpened
-+  }DEVICE_STATE;
-+
-+typedef enum 
-+  {
-+   enCommonStart=0,
-+   /* General  */
-+   enOff, enOn, enDebug, 
-+   /* Module General */
-+   enCpuFreq, 
-+   enStatus,
-+   enCommonEnd
-+   }COMMON_KEY;
-+
-+typedef struct
-+  {
-+   const char  *strKey;
-+   int  enKey;
-+  }CONTROL_KEY;
-+
-+typedef struct
-+  {
-+   char *StatName;
-+   unsigned int *StatPtr;
-+   int DataType; /* 0: int, 1: hex int, 2:channel data */
-+  }STATS_TABLE;
-+
-+typedef struct
-+  {
-+   int NumberOfStats;
-+   STATS_TABLE *StatTable;
-+  }STATS_DB;
-+
-+#define osfuncSioFlush()    HalDev->OsFunc->Control(HalDev->OsDev,"SioFlush",pszNULL,0)
-+#define osfuncSleep(Ticks)  HalDev->OsFunc->Control(HalDev->OsDev,pszSleep,pszNULL,Ticks)
-+#define osfuncStateChange() HalDev->OsFunc->Control(HalDev->OsDev,pszStateChange,pszNULL,0)
-+
-+#define CHANNEL_NAMES {"Ch0","Ch1","Ch2","Ch3","Ch4","Ch5","Ch6","Ch7","Ch8","Ch9","Ch10","Ch11","Ch12","Ch13","Ch14","Ch15"}
-+
-+#endif
-+
-diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.c linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.c
---- linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.c	2005-08-23 04:46:50.082845976 +0200
-@@ -0,0 +1,728 @@
-+#ifndef _INC_CPCOMMON_C
-+#define _INC_CPCOMMON_C
-+
-+#ifdef _CPHAL_CPMAC
-+#include "cpremap_cpmac.c"
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+#include "cpremap_cpaal5.c"
-+#endif
-+
-+#ifdef _CPHAL_CPSAR
-+#include "cpremap_cpsar.c"
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+#include "cpremap_cpaal2.c"
-+#endif
-+
-+/**
-+@defgroup Common_Config_Params Common Configuration Parameters
-+
-+This section documents the configuration parameters that are valid across
-+all CPHAL devices.
-+@{
-+*/
-+/** This is the debug level.  The field is bit defined, such that the user
-+should set to 1 all the bits corresponding to desired debug outputs.  The following 
-+are the meanings for each debug bit:
-+- bit0 (LSB): CPHAL Function Trace
-+- b1 : OS Function call trace
-+- b2 : Critical section entry/exit
-+- b3 : Memory allocation/destruction
-+- b4 : Detailed information in Rx path
-+- b5 : Detailed information in Tx path
-+- b6 : Extended error information
-+- b7 : General info
-+*/
-+static const char pszDebug[]        = "debug";
-+/** CPU Frequency. */
-+/*static const char pszCpuFreq[]      = "CpuFreq";*/               /*MJH-030403*/
-+/** Base address for the module. */
-+static const char pszBase[]         = "base";
-+/** Reset bit for the module. */
-+static const char pszResetBit[]     = "reset_bit";
-+/** Reset base address for the module. */
-+static const char pszResetBase[]    = "ResetBase";
-+/** Interrupt line for the module. */
-+static const char pszIntLine[]      = "int_line";
-+/** VLYNQ offset for the module.  Disregard if not using VLYNQ. */
-+static const char pszOffset[]       = "offset";
-+/** The OS may "Get" this parameter, which is a pointer
-+    to a character string that indicates the version of CPHAL. */
-+static const char pszVer[]          = "Version";
-+/*@}*/
-+
-+/**
-+@defgroup Common_Control_Params Common Keys for [os]Control()
-+
-+This section documents the keys used with the OS @c Control() interface that
-+are required by CPHAL devices.
-+
-+@{
-+*/
-+/** Used to wait for an integer number of clock ticks, given as an integer
-+    pointer in the @p Value parameter.  No actions are defined. */
-+static const char pszSleep[]             = "Sleep";
-+/** Requests the OS to flush it's IO buffers.  No actions are defined. */
-+static const char pszSioFlush[]          = "SioFlush";
-+/*@}*/
-+
-+static const char pszStateChange[]       = "StateChange";
-+static const char pszStatus[]            = "Status";
-+
-+static const char pszGET[]               = "Get";
-+static const char pszSET[]               = "Set";
-+static const char pszCLEAR[]             = "Clear";
-+static const char pszNULL[]              = "";
-+static const char pszLocator[]           = "Locator";
-+static const char pszOff[]               = "Off";
-+static const char pszOn[]                = "On";
-+static const char hcMaxFrags[]           = "MaxFrags";
-+
-+#ifdef _CPHAL_CPMAC
-+
-+/*  New method for string constants */
-+const char hcClear[]  = "Clear";
-+const char hcGet[]    = "Get";
-+const char hcSet[]    = "Set";
-+
-+const char hcTick[]   = "Tick";
-+
-+static const CONTROL_KEY KeyCommon[] =
-+   {
-+     {""                   , enCommonStart},
-+     {pszStatus            , enStatus},
-+     {pszOff               , enOff},
-+     {pszOn                , enOn},
-+     {pszDebug             , enDebug},
-+     {hcCpuFrequency       , enCpuFreq},                           /*MJH~030403*/
-+     {""                   , enCommonEnd}
-+   };
-+#endif
-+
-+/**
-+@defgroup Common_Statistics Statistics
-+
-+A broad array of module statistics is available.  Statistics values are accessed
-+through the @c Control() interface of the CPHAL.  There are 5 different levels
-+of statistics, each of which correspond to a unique set of data.  Furthermore,
-+certain statistics data is indexed by using a channel number and Tx queue number.
-+The following is a brief description of each statistics level, along with the
-+indexes used for the level:
-+
-+- Level 0:  Hardware Statistics (index with channel)
-+- Level 1:  CPHAL Software Statistics (channel, queue)
-+- Level 2:  CPHAL Flags (channel, queue)
-+- Level 3:  CPHAL Channel Configuration (channel)
-+- Level 4:  CPHAL General Configuration (no index)
-+
-+The caller requests statistics information by providing a Key string to the
-+@c Control() API in the following format: "Stats;[Level #];[Ch #];[Queue #]".
-+The only valid Action parameter for statistics usage is "Get".
-+
-+Code Examples:
-+@code
-+unsigned int *StatsData;
-+
-+# Get Level 0 stats for Channel 1
-+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
-+
-+# Get Level 2 stats for Channel 0, Queue 0
-+HalFunc->Control(OsDev->HalDev, "Stats;2;0;0", "Get", &StatsData);
-+
-+# Get Level 4 stats
-+HalFunc->Control(OsDev->HalDev, "Stats;4", "Get", &StatsData);
-+@endcode
-+
-+The information returned in the Value parameter of @c Control() is an
-+array of pointers to strings.  The pointers are arranged in pairs.
-+The first pointer is a pointer to a name string for a particular statistic.
-+The next pointer is a pointer to a string containing the representation of
-+the integer statistic value corresponding to the first pointer.  This is followed
-+by another pair of pointers, and so on, until a NULL pointer is encountered.  The
-+following is example code for processing the statistics data.  Note that the OS
-+is responsible for freeing the memory passed back through the Value parameter of
-+@c Control().
-+
-+@code
-+unsigned int *StatsData;
-+
-+# Get Level 0 stats for Channel 1
-+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
-+
-+# output Statistics data
-+PrintStats(StatsData);
-+
-+# the upper layer is responsible for freeing stats info
-+free(&StatsPtr);
-+
-+...
-+
-+void PrintStats(unsigned int *StatsPtr)
-+  {
-+   while(*StatsPtr)
-+     {
-+      printf("%20s:",  (char *)*StatsPtr);
-+      StatsPtr++;
-+      printf("%11s\n", (char *)*StatsPtr);
-+      StatsPtr++;
-+     }
-+   MySioFlush();
-+  }
-+@endcode
-+
-+Within each statistics level, there are several statistics defined.  The statistics that
-+are common to every CPPI module are listed below.  In addition, each module may define
-+extra statistics in each level, which will be documented within the module-specific
-+documentation appendices.
-+
-+- Level 0 Statistics
-+  - All level 0 statistics are module-specific.
-+- Level 1 Statistics (CPHAL Software Statistics)
-+  - DmaLenErrors: Incremented when the port DMA's more data than expected (per channel). (AAL5 Only)
-+  - TxMisQCnt: Incremented when host queues a packet for transmission as the port finishes
-+transmitting the previous last packet in the queue (per channel and queue).
-+  - RxMisQCnt: Incremented when host queues adds buffers to a queue as the port finished the
-+reception of the previous last packet in the queue (per channel).
-+  - TxEOQCnt: Number of times the port has reached the end of the transmit queue (per channel and queue).
-+  - RxEOQCnt: Number of times the port has reached the end of the receive queue (per channel).
-+  - RxPacketsServiced: Number of received packets (per channel).
-+  - TxPacketsServiced: Number of transmitted packets (per channel and queue).
-+  - RxMaxServiced: Maximum number of packets that the CPHAL receive interrupt has serviced at a time (per channel).
-+  - TxMaxServiced: Maximum number of packets that the CPHAL transmit interrupt has serviced at a time (per channel and queue).
-+  - RxTotal: Total number of received packets, all channels.
-+  - TxTotal: Total number of transmitted packets, all channels and queues.
-+- Level 2 Statistics (CPHAL Flags)
-+  - RcbPool: Pointer to receive descriptor pool (per channel).
-+  - RxActQueueCount: Number of buffers currently available for receive (per channel).
-+  - RxActQueueHead: Pointer to first buffer in receive queue (per channel).
-+  - RxActQueueTail: Pointer to last buffer in receive queue (per channel).
-+  - RxActive: 0 if inactive (no buffers available), or 1 if active (buffers available).
-+  - RcbStart: Pointer to block of receive descriptors.
-+  - RxTeardownPending: 1 if Rx teardown is pending but incomplete, 0 otherwise.
-+  - TcbPool: Pointer to transmit descriptor pool (per channel and queue).
-+  - TxActQueueCount: Number of buffers currently queued to be transmitted (per channel and queue).
-+  - TxActQueueHead: Pointer to first buffer in transmit queue (per channel and queue).
-+  - TxActQueueTail: Pointer to last buffer in transmit queue (per channel and queue).
-+  - TxActive: 0 if inactive (no buffers to send), or 1 if active (buffers queued to send).
-+  - TcbStart: Pointer to block of transmit descriptors.
-+  - TxTeardownPending: 1 if Tx teardown is pending but incomplete, 0 otherwise.
-+- Level 3 Statistics (CPHAL Channel Configuration)
-+  - RxBufSize: Rx buffer size.
-+  - RxBufferOffset: Rx buffer offset.
-+  - RxNumBuffers: Number of Rx buffers.
-+  - RxServiceMax: Maximum number of receive packets to service at a time.
-+  - TxNumBuffers: Number of Tx buffer descriptors.
-+  - TxNumQueues: Number of Tx queues to use.
-+  - TxServiceMax: Maximum number of transmit packets to service at a time.
-+- Level 4 Statistics (CPHAL General Configuration)
-+  - Base Address: Base address of the module.
-+  - Offset (VLYNQ): VLYNQ relative module offset.
-+  - Interrupt Line: Interrupt number.
-+  - Debug: Debug flag, 1 to enable debug.
-+  - Inst: Instance number.
-+*/
-+
-+/* 
-+   Data Type 0 = int display
-+   Data Type 1 = hex display
-+   Data Type 2 = channel structure, int display
-+   Data Type 3 = queue index and int display
-+   Data Type 4 = queue index and hex display
-+*/
-+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) /* +GSG 030307 */
-+static STATS_TABLE StatsTable0[] =
-+  {
-+#ifdef _CPHAL_AAL5
-+   /* Name ,        Data Ptr,   Data Type */
-+   {"Crc Errors",          0,          0},
-+   {"Len Errors",          0,          0},
-+   {"Abort Errors",        0,          0},
-+   {"Starv Errors",        0,          0}
-+#endif
-+#ifdef _CPHAL_CPMAC
-+   {"Rx Good Frames",      0,          0}
-+#endif
-+  };
-+
-+static STATS_TABLE StatsTable1[] =
-+  {
-+   /* Name ,        Data Ptr,   Data Type */
-+   {"DmaLenErrors",        0,          0},
-+   {"TxMisQCnt",           0,          3},
-+   {"RxMisQCnt",           0,          0},
-+   {"TxEOQCnt",            0,          3},
-+   {"RxEOQCnt",            0,          0},
-+   {"RxPacketsServiced",   0,          0},
-+   {"TxPacketsServiced",   0,          3},
-+   {"RxMaxServiced",       0,          0},
-+   {"TxMaxServiced",       0,          3},
-+   {"RxTotal",             0,          0},
-+   {"TxTotal",             0,          0},
-+  };
-+
-+static STATS_TABLE StatsTable2[] =
-+  {
-+   /* Name ,        Data Ptr,   Data Type */
-+   {"RcbPool",             0,          1},
-+   {"RxActQueueCount",     0,          0},
-+   {"RxActQueueHead",      0,          1},
-+   {"RxActQueueTail",      0,          1},
-+   {"RxActive",            0,          0},
-+   {"RcbStart",            0,          1},
-+   {"RxTeardownPending",   0,          0},
-+   {"TcbPool",             0,          4},
-+   {"TxActQueueCount",     0,          3},
-+   {"TxActQueueHead",      0,          4},
-+   {"TxActQueueTail",      0,          4},
-+   {"TxActive",            0,          3},
-+   {"TcbStart",            0,          4},
-+   {"TxTeardownPending",   0,          0}
-+  };
-+
-+static STATS_TABLE StatsTable3[] =
-+  {
-+   /* Name ,        Data Ptr,   Data Type */
-+   {"RxBufSize",           0,          2},
-+   {"RxBufferOffset",      0,          2},
-+   {"RxNumBuffers",        0,          2},
-+   {"RxServiceMax",        0,          2},
-+   {"TxNumBuffers",        0,          2},
-+   {"TxNumQueues",         0,          2},
-+   {"TxServiceMax",        0,          2},
-+#ifdef _CPHAL_AAL5
-+   {"CpcsUU",              0,          2},
-+   {"Gfc",                 0,          2},
-+   {"Clp",                 0,          2},
-+   {"Pti",                 0,          2},
-+   {"DaMask",              0,          2},
-+   {"Priority",            0,          2},
-+   {"PktType",             0,          2},
-+   {"Vci",                 0,          2},
-+   {"Vpi",                 0,          2},
-+   {"CellRate",            0,          2},
-+   {"QosType",             0,          2},
-+   {"Mbs",                 0,          2},
-+   {"Pcr",                 0,          2}
-+#endif
-+  };
-+
-+static STATS_TABLE StatsTable4[] =
-+  {
-+   {"Base Address",        0,          1},
-+   {"Offset (VLYNQ)",      0,          0},
-+   {"Interrupt Line",      0,          0},
-+   {"Debug",               0,          0},
-+   {"Instance",            0,          0},
-+#ifdef _CPHAL_AAL5
-+   {"UniNni",              0,          0}
-+#endif
-+  };
-+
-+static STATS_DB StatsDb[] =
-+  {
-+    {(sizeof(StatsTable0)/sizeof(STATS_TABLE)), StatsTable0},
-+    {(sizeof(StatsTable1)/sizeof(STATS_TABLE)), StatsTable1},
-+    {(sizeof(StatsTable2)/sizeof(STATS_TABLE)), StatsTable2},
-+    {(sizeof(StatsTable3)/sizeof(STATS_TABLE)), StatsTable3},
-+    {(sizeof(StatsTable4)/sizeof(STATS_TABLE)), StatsTable4}
-+  };
-+#endif /* +GSG 030307 */
-+
-+#ifdef _CPHAL_CPMAC /* +RC 3.02 */
-+static void resetWait(HAL_DEVICE *HalDev)
-+  {                                                                  /*+RC3.02*/
-+  const int TickReset=64;
-+  osfuncSleep((int*)&TickReset);
-+  }                                                                  /*+RC3.02*/
-+#endif /* +RC 3.02 */
-+
-+/* I only define the reset base function for the modules
-+   that can perform a reset.  The AAL5 and AAL2 modules
-+   do not perform a reset, that is done by the shared module
-+   CPSAR */
-+#if defined(_CPHAL_CPSAR) || defined(_CPHAL_CPMAC) || defined(_CPHAL_VDMAVT)
-+/*
-+ *  Determines the reset register address to be used for a particular device.
-+ *  It will search the current device entry for Locator information.  If the
-+ *  device is a root device, there will be no Locator information, and the
-+ *  function will find and return the root reset register.  If a Locator value
-+ *  is found, the function will search each VLYNQ device entry in the system
-+ *  looking for a matching Locator.  Once it finds a VLYNQ device entry with
-+ *  a matching Locator, it will extract the "ResetBase" parameter from that
-+ *  VLYNQ device entry (thus every VLYNQ entry must have the ResetBase parameter).
-+ *
-+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *  @param  ResetBase Pointer to integer address of reset register.
-+ *
-+ *  @return 0 OK, Non-zero not OK
-+ */
-+static int ResetBaseGet(HAL_DEVICE *HalDev, bit32u *ResetBase)
-+  {
-+   char *DeviceInfo = HalDev->DeviceInfo;
-+   char *MyLocator, *NextLocator;
-+   int Inst=1;
-+   bit32u error_code;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpcommon]ResetBaseGet(HalDev:%08x, ResetBase:%08x)\n", (bit32u)HalDev, ResetBase);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &MyLocator);
-+   if (error_code)
-+     {
-+      /* if no Locator value, device is on the root, so get the "reset" device */
-+      error_code = HalDev->OsFunc->DeviceFindInfo(0, "reset", &DeviceInfo);
-+      if  (error_code)
-+        {
-+         return(EC_VAL_DEVICE_NOT_FOUND);
-+        }
-+
-+      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "base", ResetBase);
-+      if (error_code)
-+        {
-+         return(EC_VAL_BASE_ADDR_NOT_FOUND);
-+        }
-+
-+      *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
-+
-+      /* found base address for root device, so we're done */
-+      return (EC_NO_ERRORS);
-+     }
-+    else
-+     {
-+      /* we have a Locator value, so the device is remote */
-+
-+      /* Find a vlynq device with a matching locator value */
-+      while ((HalDev->OsFunc->DeviceFindInfo(Inst, "vlynq", &DeviceInfo)) == EC_NO_ERRORS)
-+        {
-+         error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &NextLocator);
-+         if (error_code)
-+           {
-+            /* no Locator value for this VLYNQ, so move on */
-+            continue;
-+           }
-+         if (HalDev->OsFunc->Strcmpi(MyLocator, NextLocator)==0)
-+           {
-+            /* we have found a VLYNQ with a matching Locator, so extract the ResetBase */
-+            error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "ResetBase", ResetBase);
-+            if (error_code)
-+              {
-+               return(EC_VAL_BASE_ADDR_NOT_FOUND);
-+              }
-+            *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
-+
-+            /* found base address for root device, so we're done */
-+            return (EC_NO_ERRORS);
-+           }
-+         Inst++;
-+        } /* while */
-+     } /* else */
-+
-+   return (EC_NO_ERRORS);
-+  }
-+#endif
-+
-+#ifndef _CPHAL_AAL2 /* + RC 3.02 */
-+static bit32u ConfigGetCommon(HAL_DEVICE *HalDev)
-+  {
-+   bit32u ParmValue;
-+   bit32 error_code;
-+   char *DeviceInfo = HalDev->DeviceInfo;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpcommon]ConfigGetCommon(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszBase, &ParmValue);
-+   if (error_code)
-+     {
-+      return(EC_FUNC_HAL_INIT|EC_VAL_BASE_ADDR_NOT_FOUND);
-+     }
-+   HalDev->dev_base = ((bit32u)PhysToVirtNoCache(ParmValue));
-+
-+#ifndef _CPHAL_AAL5
-+#ifndef _CPHAL_AAL2
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszResetBit, &ParmValue);
-+   if(error_code)
-+     {
-+      return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BIT_NOT_FOUND);
-+     }
-+   HalDev->ResetBit = ParmValue;
-+
-+   /* Get reset base address */
-+   error_code = ResetBaseGet(HalDev, &ParmValue);
-+   if (error_code)
-+     return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BASE_NOT_FOUND);
-+   HalDev->ResetBase = ParmValue;
-+#endif
-+#endif
-+
-+#ifndef _CPHAL_CPSAR
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszIntLine,&ParmValue);
-+   if (error_code)
-+     {
-+      return(EC_FUNC_HAL_INIT|EC_VAL_INTERRUPT_NOT_FOUND);
-+     }
-+   HalDev->interrupt = ParmValue;
-+#endif
-+
-+   /* only look for the offset if there is a Locator field, which indicates that
-+      the module is a VLYNQ module */
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszLocator,&ParmValue);
-+   if (!error_code)
-+     {
-+      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszOffset,&ParmValue);
-+      if (error_code)
-+        {
-+         return(EC_FUNC_HAL_INIT|EC_VAL_OFFSET_NOT_FOUND);
-+        }
-+      HalDev->offset = ParmValue;
-+     }
-+    else
-+      HalDev->offset = 0;
-+
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszDebug, &ParmValue);
-+   if (!error_code) HalDev->debug = ParmValue;
-+
-+   return (EC_NO_ERRORS);
-+  }
-+#endif /* +RC 3.02 */
-+
-+#ifdef _CPHAL_CPMAC /* +RC 3.02 */
-+static void StatsInit(HAL_DEVICE *HalDev)                             /* +() RC3.02 */
-+  {
-+   /* even though these statistics may be for multiple channels and
-+      queues, i need only configure the pointer to the beginning
-+      of the array, and I can index from there if necessary */
-+
-+#ifdef _CPHAL_AAL5
-+   StatsTable0[0].StatPtr  = &HalDev->Stats.CrcErrors[0];
-+   StatsTable0[1].StatPtr  = &HalDev->Stats.LenErrors[0];
-+   StatsTable0[2].StatPtr  = &HalDev->Stats.AbortErrors[0];
-+   StatsTable0[3].StatPtr  = &HalDev->Stats.StarvErrors[0];
-+
-+   StatsTable1[0].StatPtr  = &HalDev->Stats.DmaLenErrors[0];
-+   StatsTable1[1].StatPtr  = &HalDev->Stats.TxMisQCnt[0][0];
-+   StatsTable1[2].StatPtr  = &HalDev->Stats.RxMisQCnt[0];
-+   StatsTable1[3].StatPtr  = &HalDev->Stats.TxEOQCnt[0][0];
-+   StatsTable1[4].StatPtr  = &HalDev->Stats.RxEOQCnt[0];
-+   StatsTable1[5].StatPtr  = &HalDev->Stats.RxPacketsServiced[0];
-+   StatsTable1[6].StatPtr  = &HalDev->Stats.TxPacketsServiced[0][0];
-+   StatsTable1[7].StatPtr  = &HalDev->Stats.RxMaxServiced;
-+   StatsTable1[8].StatPtr  = &HalDev->Stats.TxMaxServiced[0][0];
-+   StatsTable1[9].StatPtr  = &HalDev->Stats.RxTotal;
-+   StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal;
-+#endif
-+
-+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC))
-+   StatsTable2[0].StatPtr  = (bit32u *)&HalDev->RcbPool[0];
-+   StatsTable2[1].StatPtr  = &HalDev->RxActQueueCount[0];
-+   StatsTable2[2].StatPtr  = (bit32u *)&HalDev->RxActQueueHead[0];
-+   StatsTable2[3].StatPtr  = (bit32u *)&HalDev->RxActQueueTail[0];
-+   StatsTable2[4].StatPtr  = &HalDev->RxActive[0];
-+   StatsTable2[5].StatPtr  = (bit32u *)&HalDev->RcbStart[0];
-+   StatsTable2[6].StatPtr  = &HalDev->RxTeardownPending[0];
-+   StatsTable2[7].StatPtr  = (bit32u *)&HalDev->TcbPool[0][0];
-+   StatsTable2[8].StatPtr  = &HalDev->TxActQueueCount[0][0];
-+   StatsTable2[9].StatPtr  = (bit32u *)&HalDev->TxActQueueHead[0][0];
-+   StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0];
-+   StatsTable2[11].StatPtr = &HalDev->TxActive[0][0];
-+   StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0];
-+   StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0];
-+
-+   StatsTable3[0].StatPtr  = &HalDev->ChData[0].RxBufSize;
-+   StatsTable3[1].StatPtr  = &HalDev->ChData[0].RxBufferOffset;
-+   StatsTable3[2].StatPtr  = &HalDev->ChData[0].RxNumBuffers;
-+   StatsTable3[3].StatPtr  = &HalDev->ChData[0].RxServiceMax;
-+   StatsTable3[4].StatPtr  = &HalDev->ChData[0].TxNumBuffers;
-+   StatsTable3[5].StatPtr  = &HalDev->ChData[0].TxNumQueues;
-+   StatsTable3[6].StatPtr  = &HalDev->ChData[0].TxServiceMax;
-+#ifdef _CPHAL_AAL5
-+   StatsTable3[7].StatPtr  = &HalDev->ChData[0].CpcsUU;
-+   StatsTable3[8].StatPtr  = &HalDev->ChData[0].Gfc;
-+   StatsTable3[9].StatPtr  = &HalDev->ChData[0].Clp;
-+   StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti;
-+   StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask;
-+   StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority;
-+   StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType;
-+   StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci;
-+   StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi;
-+   StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate;
-+   StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType;
-+   StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs;
-+   StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr;
-+#endif
-+#endif
-+
-+   StatsTable4[0].StatPtr  = &HalDev->dev_base;
-+   StatsTable4[1].StatPtr  = &HalDev->offset;
-+   StatsTable4[2].StatPtr  = &HalDev->interrupt;
-+   StatsTable4[3].StatPtr  = &HalDev->debug;
-+   StatsTable4[4].StatPtr  = &HalDev->Inst;
-+  }
-+#endif /* +RC 3.02 */
-+
-+#ifndef _CPHAL_CPSAR /* +RC 3.02 */
-+#ifndef _CPHAL_AAL2 /* +RC 3.02 */
-+/*
-+ *  Returns statistics information.
-+ *
-+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *
-+ *  @return 0
-+ */
-+static int StatsGet(HAL_DEVICE *HalDev, void **StatPtr, int Index, int Ch, int Queue)
-+  {
-+   int Size;
-+   bit32u *AddrPtr;
-+   char *DataPtr;
-+   STATS_TABLE *StatsTable;
-+   int i, NumberOfStats;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpcommon]StatsGet(HalDev:%08x, StatPtr:%08x)\n",
-+                (bit32u)HalDev, (bit32u)StatPtr);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   StatsTable = StatsDb[Index].StatTable;
-+   NumberOfStats = StatsDb[Index].NumberOfStats;
-+
-+   Size = sizeof(bit32u)*((NumberOfStats*2)+1);
-+   Size += (NumberOfStats*11);
-+   *StatPtr = (bit32u *)HalDev->OsFunc->Malloc(Size);
-+
-+   AddrPtr = (bit32u *) *StatPtr;
-+   DataPtr = (char *)AddrPtr;
-+   DataPtr += sizeof(bit32u)*((NumberOfStats*2)+1);
-+
-+   for (i=0; i<NumberOfStats; i++)
-+     {
-+      *AddrPtr++ = (bit32u)StatsTable[i].StatName;
-+      *AddrPtr++ = (bit32u)DataPtr;
-+      if (&StatsTable[i].StatPtr[Ch] != 0)
-+        {
-+         switch(StatsTable[i].DataType)
-+           {
-+            case 0:
-+              HalDev->OsFunc->Sprintf(DataPtr, "%d", (bit32u *)StatsTable[i].StatPtr[Ch]);
-+              break;
-+            case 1:
-+              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", (bit32u *)StatsTable[i].StatPtr[Ch]);
-+              break;
-+            case 2:
-+              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch * (sizeof(CHANNEL_INFO)/4))));
-+              break;
-+            case 3:
-+              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
-+              break;
-+            case 4:
-+              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
-+              break;
-+            default:
-+              /* invalid data type, due to CPHAL programming error */
-+              break;
-+           }
-+        }
-+       else
-+        {
-+         /* invalid statistics pointer, probably was not initialized */
-+        }
-+      DataPtr += HalDev->OsFunc->Strlen(DataPtr) + 1;
-+     }
-+
-+   *AddrPtr = (bit32u) 0;
-+
-+   return (EC_NO_ERRORS);
-+  }
-+#endif /* +RC 3.02 */
-+#endif /* +RC 3.02 */
-+
-+#ifdef _CPHAL_CPMAC
-+static void gpioFunctional(int base, int bit)
-+  {                                                                  /*+RC3.02*/
-+  bit32u GpioEnr = base + 0xC;
-+  /*  To make functional, set to zero  */
-+  *(volatile bit32u *)(GpioEnr) &= ~(1 << bit);                      /*+RC3.02*/
-+  }                                                                  /*+RC3.02*/
-+
-+
-+/*+RC3.02*/
-+/* Common function, Checks to see if GPIO should be in functional mode */
-+static void gpioCheck(HAL_DEVICE *HalDev, void *moduleDeviceInfo)
-+  {                                                                  /*+RC3.02*/
-+  int rc;
-+  void *DeviceInfo;
-+  char *pszMuxBits;
-+  char pszMuxBit[20];
-+  char *pszTmp;
-+  char szMuxBit[20];
-+  char *ptr;
-+  int base;
-+  int reset_bit;
-+  int bit;
-+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+
-+  rc = OsFunc->DeviceFindParmValue(moduleDeviceInfo, "gpio_mux",&pszTmp);
-+  if(rc) return;
-+  /*  gpio entry found, get GPIO register info and make functional  */
-+
-+  /* temp copy until FinParmValue fixed */
-+  ptr = &szMuxBit[0];
-+  while ((*ptr++ = *pszTmp++));
-+
-+  pszMuxBits = &szMuxBit[0];
-+
-+  rc = OsFunc->DeviceFindInfo(0,"gpio",&DeviceInfo);
-+  if(rc) return;
-+
-+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",&base);
-+  if(rc) return;
-+
-+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit);
-+  if(rc) return;
-+
-+  /* If GPIO still in reset, then exit  */
-+  if((VOLATILE32(HalDev->ResetBase) & (1 << reset_bit)) == 0)
-+    return;
-+  /*  format for gpio_mux is  gpio_mux = <int>;<int>;<int>...*/
-+  while (*pszMuxBits)
-+    {
-+    pszTmp = &pszMuxBit[0];
-+    if(*pszMuxBits == ';') pszMuxBits++;
-+    while ((*pszMuxBits != ';') && (*pszMuxBits != '\0'))
-+      {
-+      osfuncSioFlush();
-+      /*If value not a number, skip */
-+      if((*pszMuxBits < '0') || (*pszMuxBits > '9'))
-+        pszMuxBits++;
-+      else
-+        *pszTmp++ = *pszMuxBits++;
-+      }
-+    *pszTmp = '\0';
-+    bit = OsFunc->Strtoul(pszMuxBit, &pszTmp, 10);
-+    gpioFunctional(base, bit);
-+    resetWait(HalDev);  /* not sure if this is needed */
-+    }
-+  }                                                                  /*+RC3.02*/
-+#endif  /* CPMAC  */
-+
-+#ifdef _CPHAL_AAL5
-+const char hcSarFrequency[] = "SarFreq";
-+#endif
-+
-+#endif  /* _INC  */
-diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.h linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.h
---- linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.h	2005-08-23 04:46:50.083845824 +0200
-@@ -0,0 +1,79 @@
-+#ifndef _INC_CPCOMMON_H
-+#define _INC_CPCOMMON_H
-+
-+#define VOLATILE32(addr)  (*(volatile bit32u *)(addr))
-+#ifndef dbgPrintf
-+#define dbgPrintf HalDev->OsFunc->Printf
-+#endif
-+
-+#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field
-+
-+#define DBG(level)  (HalDev->debug & (1<<(level)))
-+/*
-+#define DBG0()      DBG(0)
-+#define DBG1()      DBG(1)
-+#define DBG2()      DBG(2)
-+#define DBG3()      DBG(3)
-+#define DBG4()      DBG(4)
-+#define DBG5()      DBG(5)
-+#define DBG6()      DBG(6)
-+#define DBG7()      DBG(7)
-+*/
-+
-+/*
-+ *  List of defined actions for use with Control().
-+ */
-+typedef enum 
-+  {
-+   enGET=0,     /**< Get the value associated with a key */
-+   enSET,       /**< Set the value associates with a key */
-+   enCLEAR,     /**<Clear the value */ 
-+   enNULL       /**< No data action, used to initiate a service or send a message */
-+  }ACTION;
-+
-+/*
-+ *  Enumerated hardware states.
-+ */
-+typedef enum
-+  {
-+   enConnected=1, enDevFound, enInitialized, enOpened
-+  }DEVICE_STATE;
-+
-+typedef enum 
-+  {
-+   enCommonStart=0,
-+   /* General  */
-+   enOff, enOn, enDebug, 
-+   /* Module General */
-+   enCpuFreq, 
-+   enStatus,
-+   enCommonEnd
-+   }COMMON_KEY;
-+
-+typedef struct
-+  {
-+   const char  *strKey;
-+   int  enKey;
-+  }CONTROL_KEY;
-+
-+typedef struct
-+  {
-+   char *StatName;
-+   unsigned int *StatPtr;
-+   int DataType; /* 0: int, 1: hex int, 2:channel data */
-+  }STATS_TABLE;
-+
-+typedef struct
-+  {
-+   int NumberOfStats;
-+   STATS_TABLE *StatTable;
-+  }STATS_DB;
-+
-+#define osfuncSioFlush()    HalDev->OsFunc->Control(HalDev->OsDev,"SioFlush",pszNULL,0)
-+#define osfuncSleep(Ticks)  HalDev->OsFunc->Control(HalDev->OsDev,pszSleep,pszNULL,Ticks)
-+#define osfuncStateChange() HalDev->OsFunc->Control(HalDev->OsDev,pszStateChange,pszNULL,0)
-+
-+#define CHANNEL_NAMES {"Ch0","Ch1","Ch2","Ch3","Ch4","Ch5","Ch6","Ch7","Ch8","Ch9","Ch10","Ch11","Ch12","Ch13","Ch14","Ch15"}
-+
-+#endif
-+
-diff -urN linux.old/drivers/atm/sangam_atm/cppi_cpaal5.c linux.dev/drivers/atm/sangam_atm/cppi_cpaal5.c
---- linux.old/drivers/atm/sangam_atm/cppi_cpaal5.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cppi_cpaal5.c	2005-08-23 04:46:50.084845672 +0200
-@@ -0,0 +1,1483 @@
-+/*************************************************************************
-+ *  TNETDxxxx Software Support
-+ *  Copyright (c) 2002,2003 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  FILE: cppi.c
-+ *
-+ *  DESCRIPTION:
-+ *      This file contains shared code for all CPPI modules.
-+ *
-+ *  HISTORY:
-+ *   7Aug02 Greg RC1.00  Original Version created.
-+ *  27Sep02 Mick RC1.01  Merged for use by CPMAC/CPSAR
-+ *  16Oct02 Mick RC1.02  Performance Tweaks (see cppihist.txt)
-+ *  12Nov02 Mick RC1.02  Updated to use cpmac_reg.h
-+ *  09Jan03 Mick RC3.01  Removed modification to RxBuffer ptr
-+ *  28Mar03 Mick 1.03    RxReturn now returns error if Malloc Fails
-+ *  10Apr03 Mick 1.03.02 Added Needs Buffer Support
-+ *  11Jun03 Mick 1.06.02 halSend() errors corrected
-+ *
-+ *  @author  Greg Guyotte
-+ *  @version 1.00
-+ *  @date    7-Aug-2002
-+ *****************************************************************************/
-+/* each CPPI module must modify this file, the rest of the
-+                     code in cppi.c should be totally shared *//* Each CPPI module MUST properly define all constants shown below */
-+
-+/* CPPI registers */
-+
-+/* the following defines are not CPPI specific, but still used by cppi.c */
-+
-+static void FreeRx(HAL_DEVICE *HalDev, int Ch)
-+  {
-+   HAL_RCB *rcb_ptr;                                                /*+GSG 030303*/
-+   int rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf;                        /*+GSG 030303*/
-+   int Num = HalDev->ChData[Ch].RxNumBuffers, i;                    /*+GSG 030303*/
-+
-+   /* Free Rx data buffers attached to descriptors, if necessary */
-+   if (HalDev->RcbStart[Ch] != 0)                                   /*+GSG 030303*/
-+     {                                                              /*+GSG 030303*/
-+      for(i=0;i<Num;i++)                                            /*+GSG 030303*/
-+        {                                                           /*+GSG 030303*/
-+         rcb_ptr = (HAL_RCB *)(HalDev->RcbStart[Ch] + (i*rcbSize)); /*+GSG 030303*/
-+
-+         /* free the data buffer */
-+         if (rcb_ptr->DatPtr != 0)
-+       {
-+
-+        HalDev->OsFunc->FreeRxBuffer((void *)rcb_ptr->OsInfo, (void *)rcb_ptr->DatPtr);
-+        rcb_ptr->OsInfo=0;                                        /*MJH+030522*/
-+        rcb_ptr->DatPtr=0;                                        /*MJH+030522*/
-+       }
-+    }                                                           /*+GSG 030303*/
-+     }                                                              /*+GSG 030303*/
-+
-+   /* free up all desciptors at once */
-+   HalDev->OsFunc->FreeDmaXfer(HalDev->RcbStart[Ch]);
-+
-+   /* mark buffers as freed */
-+   HalDev->RcbStart[Ch] = 0;
-+  }
-+
-+static void FreeTx(HAL_DEVICE *HalDev, int Ch, int Queue)
-+  {
-+
-+/*+GSG 030303*/
-+
-+   /* free all descriptors at once */
-+   HalDev->OsFunc->FreeDmaXfer(HalDev->TcbStart[Ch][Queue]);
-+
-+   HalDev->TcbStart[Ch][Queue] = 0;
-+  }
-+
-+/* return of 0 means that this code executed, -1 means the interrupt was not
-+   a teardown interrupt */
-+static int RxTeardownInt(HAL_DEVICE *HalDev, int Ch)
-+  {
-+   bit32u base = HalDev->dev_base;
-+
-+   int i;
-+   volatile bit32u *pTmp;
-+
-+   /* check to see if the interrupt is a teardown interrupt */
-+   if (((*(pRX_CPPI_COMP_PTR( base )+( Ch *64)))  & TEARDOWN_VAL) == TEARDOWN_VAL)
-+     {
-+      /* finish channel teardown */
-+
-+      /* Free channel resources on a FULL teardown */
-+      if (HalDev->RxTeardownPending[Ch] & FULL_TEARDOWN)
-+        {
-+         FreeRx(HalDev, Ch);
-+        }
-+
-+      /* bug fix - clear Rx channel pointers on teardown */
-+      HalDev->RcbPool[Ch] = 0;
-+      HalDev->RxActQueueHead[Ch]  = 0;
-+      HalDev->RxActQueueCount[Ch] = 0;
-+      HalDev->RxActive[Ch] = FALSE;
-+
-+      /* write completion pointer */
-+      (*(pRX_CPPI_COMP_PTR( base )+( Ch *64)))  = TEARDOWN_VAL;
-+
-+      /* use direction bit as a teardown pending bit! May be able to
-+         use only one teardown pending integer in HalDev */
-+
-+      HalDev->RxTeardownPending[Ch] &= ~RX_TEARDOWN;
-+
-+      HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0;
-+
-+      /* call OS Teardown Complete (if TX is also done) */
-+      if ((HalDev->TxTeardownPending[Ch] & TX_TEARDOWN) == 0)
-+    {
-+     /* mark channel as closed */
-+         HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0;
-+
-+     /* disable channel interrupt */
-+     SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<Ch);
-+         SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<(Ch+16)); /* +GSG 030307 */
-+     SAR_RX_MASK_CLR(HalDev->dev_base) = (1<<Ch);
-+
-+     /* Clear PDSP Channel State RAM */
-+     pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+(Ch*64));
-+     for (i=0; i<NUM_PDSP_AAL5_STATE_WORDS; i++)
-+       *pTmp++ = 0;
-+
-+     if ((HalDev->RxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0)
-+       {
-+
-+        HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_TX|DIRECTION_RX);
-+       }
-+     /* clear all teardown pending information for this channel */
-+     HalDev->RxTeardownPending[Ch] = 0;
-+     HalDev->TxTeardownPending[Ch] = 0;
-+    }
-+
-+      return (EC_NO_ERRORS);
-+     }
-+   return (-1);
-+  }
-+
-+/* return of 0 means that this code executed, -1 means the interrupt was not
-+   a teardown interrupt */
-+static int TxTeardownInt(HAL_DEVICE *HalDev, int Ch, int Queue)
-+  {
-+   bit32u base = HalDev->dev_base;
-+   HAL_TCB *Last, *Curr, *First;                                    /*+GSG 030303*/
-+
-+   int i;
-+   volatile bit32u *pTmp;
-+
-+   if (((*(pTXH_CPPI_COMP_PTR( base )+( Ch *64)+( Queue )))  & TEARDOWN_VAL) == TEARDOWN_VAL)
-+     {
-+      /* return outstanding buffers to OS                             +RC3.02*/
-+      Curr = HalDev->TxActQueueHead[Ch][Queue];                     /*+GSG 030303*/
-+      First = Curr;                                                 /*+GSG 030303*/
-+      while (Curr)                                                  /*+GSG 030303*/
-+    {                                                           /*+GSG 030303*/
-+     /* Pop TCB(s) for packet from the stack */                 /*+GSG 030303*/
-+         Last = Curr->Eop;                                          /*+GSG 030303*/
-+         HalDev->TxActQueueHead[Ch][Queue] = Last->Next;            /*+GSG 030303*/
-+                                                                    /*+GSG 030303*/
-+         /* return to OS */                                         /*+GSG 030303*/
-+         HalDev->OsFunc->SendComplete(Curr->OsInfo);                /*+GSG 030303*/
-+                                                                    /*+GSG 030303*/
-+         /* Push Tcb(s) back onto the stack */                      /*+GSG 030303*/
-+         Curr = Last->Next;                                         /*+GSG 030303*/
-+         Last->Next = HalDev->TcbPool[Ch][Queue];                   /*+GSG 030303*/
-+         HalDev->TcbPool[Ch][Queue] = First;                        /*+GSG 030303*/
-+                                                                    /*+GSG 030303*/
-+         /* set the first(SOP) pointer for the next packet */       /*+GSG 030303*/
-+         First = Curr;                                              /*+GSG 030303*/
-+    }                                                           /*+GSG 030303*/
-+
-+      /* finish channel teardown */
-+
-+      /* save the OsInfo to pass to upper layer
-+         THIS WAS CRASHING - because it's possible that I get the teardown
-+     notification and the TcbHPool is null.  In this case, the buffers
-+     to free can be found in the TxHActiveQueue.  If I need to get OsInfo
-+     in the future, I can get it from one of those buffers.
-+     OsInfo = HalDev->TcbHPool[Ch]->OsInfo; */
-+
-+      if (HalDev->TxTeardownPending[Ch] & FULL_TEARDOWN)
-+        {
-+     FreeTx(HalDev, Ch, Queue);
-+    } /* if FULL teardown */
-+
-+      /* bug fix - clear Tx channel pointers on teardown */
-+      HalDev->TcbPool[Ch][Queue] = 0;
-+      HalDev->TxActQueueHead[Ch][Queue]  = 0;
-+      HalDev->TxActQueueCount[Ch][Queue] = 0;
-+      HalDev->TxActive[Ch][Queue]        = FALSE;
-+
-+      /* write completion pointer */
-+      (*(pTXH_CPPI_COMP_PTR( base )+( Ch *64)+( Queue )))  = TEARDOWN_VAL;
-+
-+      /* no longer pending teardown */
-+      HalDev->TxTeardownPending[Ch] &= ~TX_TEARDOWN;
-+
-+      HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0;
-+
-+      /* call OS Teardown Complete (if Rx is also done) */
-+      if ((HalDev->RxTeardownPending[Ch] & RX_TEARDOWN) == 0)
-+    {
-+     /* mark channel as closed */
-+     HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0;
-+
-+     /* disable channel interrupt */
-+     SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<Ch);
-+         SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<(Ch+16)); /* +GSG 030307 */
-+     SAR_RX_MASK_CLR(HalDev->dev_base) = (1<<Ch);
-+
-+     /* Clear PDSP Channel State RAM */
-+     pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+(Ch*64));
-+     for (i=0; i<NUM_PDSP_AAL5_STATE_WORDS; i++)
-+       *pTmp++ = 0;
-+
-+     if ((HalDev->TxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0)
-+       {
-+
-+        HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_TX|DIRECTION_RX);
-+       }
-+
-+     /* clear all teardown pending information for this channel */
-+     HalDev->RxTeardownPending[Ch] = 0;
-+     HalDev->TxTeardownPending[Ch] = 0;
-+    }
-+
-+      return (EC_NO_ERRORS);
-+     }
-+   return (-1);
-+  }
-+
-+/* +GSG 030421 */
-+static void AddToRxQueue(HAL_DEVICE *HalDev, HAL_RCB *FirstRcb, HAL_RCB *LastRcb, int FragCount, int Ch)
-+  {
-+   HAL_RCB *OldTailRcb;
-+
-+   if (HalDev->RxActQueueCount[Ch]==0)
-+     {
-+
-+      HalDev->RxActQueueHead[Ch]=FirstRcb;
-+      HalDev->RxActQueueTail[Ch]=LastRcb;
-+      HalDev->RxActQueueCount[Ch]=FragCount;
-+      if ((!HalDev->InRxInt[Ch])&&(!HalDev->RxActive[Ch]))
-+        {
-+         /* write Rx Queue Head Descriptor Pointer */
-+         (*(pRX_DMA_STATE_WORD_1( HalDev->dev_base )+( Ch *64)))  = VirtToPhys(FirstRcb) - HalDev->offset;
-+         HalDev->RxActive[Ch]=TRUE;
-+        }
-+     }
-+    else
-+     {
-+
-+      OldTailRcb=HalDev->RxActQueueTail[Ch];
-+      OldTailRcb->Next=(void *)FirstRcb;
-+
-+      /* Emerald fix 10/29 (Denis) */
-+      *((bit32u *) VirtToVirtNoCache(&OldTailRcb->HNext))=VirtToPhys(FirstRcb) - HalDev->offset;
-+
-+      HalDev->RxActQueueTail[Ch]=LastRcb;
-+      HalDev->RxActQueueCount[Ch]+=FragCount;
-+     }
-+  }
-+
-+/**
-+ *  @ingroup CPHAL_Functions
-+ *  This function is called to indicate to the CPHAL that the upper layer
-+ *  software has finished processing the receive data (given to it by
-+ *  osReceive()).  The CPHAL will then return the appropriate receive buffers
-+ *  and buffer descriptors to the available pool.
-+ *
-+ *  @param   HalReceiveInfo   Start of receive buffer descriptor chain returned to
-+ *                      CPHAL.
-+ *  @param   StripFlag  Flag indicating whether the upper layer software has
-+ *                      retained ownership of the receive data buffers.
-+ *<BR>
-+ * 'FALSE' means  that the CPHAL can reuse the receive data buffers.
-+ *<BR>
-+ * 'TRUE' : indicates the data buffers were retained by the OS
-+ *<BR>
-+ * NOTE:  If StripFlag is TRUE, it is the responsibility of the upper layer software to free the buffers when they are no longer needed.
-+ *
-+ *  @return EC_NO_ERRORS (ok). <BR>
-+ *          Possible Error Codes:<BR>
-+ *          @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *          @ref EC_VAL_RCB_NEEDS_BUFFER "EC_VAL_RCB_NEEDS_BUFFER"<BR>
-+ *          @ref EC_VAL_RCB_DROPPED "EC_VAL_RCB_DROPPED"<BR>
-+ */
-+static int halRxReturn(HAL_RECEIVEINFO *HalReceiveInfo,
-+            int StripFlag)
-+  {
-+   int Ch = HalReceiveInfo->Ch, i;
-+   HAL_RCB *LastRcb, *TempRcb;
-+   char *pBuf;
-+   HAL_RCB *CurrHeadRcb = HalReceiveInfo, *LastGoodRcb=0;         /* +GSG 030421 */
-+   HAL_DEVICE *HalDev = HalReceiveInfo->HalDev;
-+   int RcbSize = HalDev->ChData[Ch].RxBufSize;
-+   int FragCount = HalReceiveInfo->FragCount;
-+   int rc=0;                                                      /*MJH+030417*/
-+   int GoodCount=0;                                               /*GSG+030421*/
-+
-+   if (HalDev->State != enOpened)
-+     return(EC_AAL5 |EC_FUNC_RXRETURN|EC_VAL_INVALID_STATE);
-+
-+   LastRcb=(HAL_RCB *)HalReceiveInfo->Eop;
-+   LastRcb->HNext=0;
-+   LastRcb->Next=0;
-+
-+   if (FragCount>1)
-+     {
-+      LastRcb->Off_BLen=RcbSize;
-+      LastRcb->mode=CB_OWNERSHIP_BIT;
-+     }
-+
-+   HalReceiveInfo->Off_BLen=RcbSize;
-+   HalReceiveInfo->mode=CB_OWNERSHIP_BIT;
-+
-+   /* If OS has kept the buffers for this packet, attempt to alloc new buffers */
-+   if (StripFlag)
-+     {
-+      TempRcb = HalReceiveInfo;
-+      for (i=0; i<FragCount; i++)
-+        {
-+         if (TempRcb == 0)
-+           {
-+            dbgPrintf("Rx Return error while allocating new buffers\n");
-+            dbgPrintf("Rcb = %08x, Rcb->Eop = %08x, FragCount = %d:%d\n",
-+              (bit32u)HalReceiveInfo, (bit32u)HalReceiveInfo->Eop, FragCount,i);
-+            osfuncSioFlush();
-+
-+            return(EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_CORRUPT_RCB_CHAIN);
-+           }
-+
-+         /* size = ((RcbSize+15) & ~15) + 15;*/                      /*-3.01b*/
-+         /*size = RcbSize + 15;*/                                               /* -GSG 030421 */
-+         pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(RcbSize,0,
-+                             0xF,HalDev->ChData[Ch].OsSetup,
-+                             (void *)TempRcb,
-+                             (void *)&TempRcb->OsInfo,
-+                             (void *) HalDev->OsDev);
-+         if (!pBuf)
-+           {
-+            /* malloc failed, add this RCB to Needs Buffer List */
-+            TempRcb->FragCount = 1;                                             /*MJH+030417*/
-+            (HAL_RCB *)TempRcb->Eop = TempRcb;                                  /* GSG +030430 */
-+
-+            if(HalDev->NeedsCount < MAX_NEEDS)                                  /* +MJH 030410 */
-+              {                                                                 /* +MJH 030410 */
-+               HalDev->Needs[HalDev->NeedsCount] = (HAL_RECEIVEINFO *) TempRcb; /* +MJH 030410 */
-+               HalDev->NeedsCount++;                                            /* +MJH 030410 */
-+               rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_NEEDS_BUFFER);         /* ~MJH 030417 */
-+              }                                                                 /* +MJH 030410 */
-+             else                                                               /* +MJH 030410 */
-+               rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_DROPPED);              /* ~MJH 030417 */
-+
-+            /* requeue any previous RCB's that were ready to go before this one */
-+            if (GoodCount > 0)                                                  /* +GSG 030421 */
-+              {                                                                 /* +GSG 030421 */
-+               LastGoodRcb->HNext=0;                                            /* +GSG 030430 */
-+               LastGoodRcb->Next=0;                                             /* +GSG 030430 */
-+               osfuncDataCacheHitWriteback((void *)LastGoodRcb, 16);            /* +GSG 030430 */
-+
-+               AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch);   /* +GSG 030421 */
-+               GoodCount = 0;                                                   /* +GSG 030421 */
-+              }                                                                 /* +GSG 030421 */
-+
-+            CurrHeadRcb = TempRcb->Next;                                        /* +GSG 030421 */
-+           }
-+          else                                                                  /* +GSG 030421 */
-+           {                                                                    /* +GSG 030421 */
-+            /* malloc succeeded, requeue the RCB to the hardware */
-+            TempRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset;
-+            TempRcb->DatPtr=pBuf;
-+            /* Emerald fix 10/29 */
-+            osfuncDataCacheHitWriteback((void *)TempRcb, 16);
-+
-+            /* i store the last good RCB in case the malloc fails for the
-+               next fragment.  This ensures that I can go ahead and return
-+               a partial chain of RCB's to the hardware */
-+            LastGoodRcb = TempRcb;                                              /* +GSG 030421 */
-+            GoodCount++;                                                        /* +GSG 030421 */
-+           }                                                                    /* +GSG 030421 */
-+         TempRcb = TempRcb->Next;
-+        } /*  end of Frag loop */
-+      /* if there any good RCB's to requeue, do so here */
-+      if (GoodCount > 0)                                                        /* +GSG 030421 */
-+        {
-+         AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch);          /* +GSG 030421 */
-+        }
-+      return(rc);                                                               /* ~GSG 030421 */
-+     }
-+   else
-+     {
-+      /*  Not Stripping */
-+      /* Emerald */
-+      /* Write Back SOP and last RCB */
-+      osfuncDataCacheHitWriteback((void *)HalReceiveInfo, 16);
-+
-+      if (FragCount > 1)
-+        {
-+         osfuncDataCacheHitWriteback((void *)LastRcb, 16);
-+        }
-+      /* if not stripping buffers, always add to queue */
-+      AddToRxQueue(HalDev, HalReceiveInfo, LastRcb, FragCount, Ch); /*MJH~030520*/
-+     }
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+/* +MJH 030410
-+   Trys to liberate an RCB until liberation fails.
-+   Note: If liberation fails then RxReturn will re-add the RCB to the
-+         Needs list.
-+*/
-+static void NeedsCheck(HAL_DEVICE *HalDev)
-+{
-+    HAL_RECEIVEINFO* HalRcb;
-+    int rc;
-+    HalDev->OsFunc->CriticalOn();
-+    while(HalDev->NeedsCount)
-+      {
-+      HalDev->NeedsCount--;
-+      HalRcb = HalDev->Needs[HalDev->NeedsCount];
-+      rc =  halRxReturn(HalRcb, 1);
-+      /* short circuit if RxReturn starts to fail */
-+      if (rc != 0)
-+        break;
-+      }
-+    HalDev->OsFunc->CriticalOff();
-+}
-+
-+/*
-+ *  This function allocates transmit buffer descriptors (internal CPHAL function).
-+ *  It creates a high priority transmit queue by default for a single Tx
-+ *  channel.  If QoS is enabled for the given CPHAL device, this function
-+ *  will also allocate a low priority transmit queue.
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
-+ *  @param   Ch       Channel number.
-+ *
-+ *  @return  0 OK, Non-Zero Not OK
-+ */
-+static int InitTcb(HAL_DEVICE *HalDev, int Ch)
-+  {
-+   int i, Num = HalDev->ChData[Ch].TxNumBuffers;
-+   HAL_TCB *pTcb=0;
-+   char *AllTcb;
-+   int  tcbSize, Queue;
-+   int SizeMalloc;
-+
-+   tcbSize = (sizeof(HAL_TCB)+0xf)&~0xf;
-+   SizeMalloc = (tcbSize*Num)+0xf;
-+
-+   for (Queue=0; Queue < HalDev->ChData[Ch].TxNumQueues; Queue++)
-+     {
-+      if (HalDev->TcbStart[Ch][Queue] == 0)
-+        {
-+
-+         /* malloc all TCBs at once */
-+         AllTcb = (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff);
-+         if (!AllTcb)
-+           {
-+            return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_TCB_MALLOC_FAILED);
-+           }
-+
-+         HalDev->OsFunc->Memset(AllTcb, 0, SizeMalloc);
-+
-+         /* keep this address for freeing later */
-+         HalDev->TcbStart[Ch][Queue] = AllTcb;
-+        }
-+       else
-+        {
-+         /* if the memory has already been allocated, simply reuse it! */
-+         AllTcb = HalDev->TcbStart[Ch][Queue];
-+        }
-+
-+      /* align to cache line */
-+      AllTcb = (char *)(((bit32u)AllTcb + 0xf) &~ 0xf); /*PITS #143  MJH~030522*/
-+
-+      /* default High priority transmit queue */
-+      HalDev->TcbPool[Ch][Queue]=0;
-+      for(i=0;i<Num;i++)
-+        {
-+         /*pTcb=(HAL_TCB *) OsFunc->MallocDmaXfer(sizeof(HAL_TCB),0,0xffffffff); */
-+         pTcb= (HAL_TCB *)(AllTcb + (i*tcbSize));
-+         pTcb->mode=0;
-+         pTcb->BufPtr=0;
-+         pTcb->Next=HalDev->TcbPool[Ch][Queue];
-+         pTcb->Off_BLen=0;
-+         HalDev->TcbPool[Ch][Queue]=pTcb;
-+        }
-+      /*HalDev->TcbEnd = pTcb;*/
-+     }
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+/*
-+ *  This function allocates receive buffer descriptors (internal CPHAL function).
-+ *  After allocation, the function 'queues' (gives to the hardware) the newly
-+ *  created receive buffers to enable packet reception.
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
-+ *  @param   Ch    Channel number.
-+ *
-+ *  @return  0 OK, Non-Zero Not OK
-+ */
-+static int InitRcb(HAL_DEVICE *HalDev, int Ch)
-+  {
-+   int i, Num = HalDev->ChData[Ch].RxNumBuffers;
-+   int Size = HalDev->ChData[Ch].RxBufSize;
-+   HAL_RCB *pRcb;
-+   char *pBuf;
-+   char *AllRcb;
-+   int  rcbSize;
-+   int  DoMalloc = 0;
-+   int SizeMalloc;
-+   int MallocSize;
-+
-+   rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf;
-+   SizeMalloc = (rcbSize*Num)+0xf;
-+
-+   if (HalDev->RcbStart[Ch] == 0)
-+     {
-+      DoMalloc = 1;
-+
-+      /* malloc all RCBs at once */
-+      AllRcb= (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff);
-+      if (!AllRcb)
-+        {
-+         return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RCB_MALLOC_FAILED);
-+        }
-+
-+      HalDev->OsFunc->Memset(AllRcb, 0, SizeMalloc);
-+
-+      /* keep this address for freeing later */
-+      HalDev->RcbStart[Ch] = AllRcb;
-+     }
-+    else
-+     {
-+      /* if the memory has already been allocated, simply reuse it! */
-+      AllRcb = HalDev->RcbStart[Ch];
-+     }
-+
-+   /* align to cache line */
-+   AllRcb = (char *)(((bit32u)AllRcb + 0xf)&~0xf);  /*PITS #143  MJH~030522*/
-+
-+   HalDev->RcbPool[Ch]=0;
-+   for(i=0;i<Num;i++)
-+     {
-+      pRcb = (HAL_RCB *)(AllRcb + (i*rcbSize));
-+
-+      if (DoMalloc == 1)
-+        {
-+
-+         MallocSize = Size;                                       /*~3.01 */
-+         pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(MallocSize,0,0xF,HalDev->ChData[Ch].OsSetup, (void *)pRcb, (void *)&pRcb->OsInfo, (void *) HalDev->OsDev);
-+         if(!pBuf)
-+             {
-+            return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RX_BUFFER_MALLOC_FAILED);
-+             }
-+           /* -RC3.01 pBuf = (char *)(((bit32u)pBuf+0xF) & ~0xF); */
-+         pRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset;
-+         pRcb->DatPtr=pBuf;
-+         /*pRcb->BufSize=Size;*/
-+        }
-+      pRcb->mode=0;
-+      pRcb->Ch=Ch;
-+      pRcb->Next=(void *)HalDev->RcbPool[Ch];
-+      pRcb->Off_BLen=0;
-+      pRcb->HalDev = HalDev;
-+      HalDev->RcbPool[Ch]=pRcb;
-+     }
-+
-+   /* Give all of the Rx buffers to hardware */
-+
-+   while(HalDev->RcbPool[Ch])
-+     {
-+      pRcb=HalDev->RcbPool[Ch];
-+      HalDev->RcbPool[Ch]=pRcb->Next;
-+      pRcb->Eop=(void*)pRcb;
-+      pRcb->FragCount=1;
-+      halRxReturn((HAL_RECEIVEINFO *)pRcb, 0);
-+     }
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+/**
-+ *  @ingroup CPHAL_Functions
-+ *  This function transmits the data in FragList using available transmit
-+ *  buffer descriptors.  More information on the use of the Mode parameter
-+ *  is available in the module-specific appendices.  Note:  The OS should
-+ *  not call Send() for a channel that has been requested to be torndown.
-+ *
-+ *  @param   HalDev      CPHAL module instance. (set by cphalInitModule())
-+ *  @param   FragList    Fragment List structure.
-+ *  @param   FragCount   Number of fragments in FragList.
-+ *  @param   PacketSize  Number of bytes to transmit.
-+ *  @param   OsSendInfo  OS Send Information structure. <BR>
-+ *  @param   Mode        32-bit value with the following bit fields: <BR>
-+ *                       31-16: Mode  (used for module specific data). <BR>
-+ *                       15-08: Queue (transmit queue to send on). <BR>
-+ *                       07-00: Channel (channel number to send on).
-+ *
-+ *  @return  EC_NO_ERRORS (ok). <BR>
-+ *           Possible Error Codes:<BR>
-+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *           @ref EC_VAL_NOT_LINKED "EC_VAL_NOT_LINKED"<BR>
-+ *           @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
-+ *           @ref EC_VAL_OUT_OF_TCBS "EC_VAL_OUT_OF_TCBS"<BR>
-+ *           @ref EC_VAL_NO_TCBS "EC_VAL_NO_TCBS"<BR>
-+ */
-+static int halSend(HAL_DEVICE *HalDev,FRAGLIST *FragList,
-+                      int FragCount,int PacketSize, OS_SENDINFO *OsSendInfo,
-+                      bit32u Mode)
-+  {
-+  HAL_TCB *tcb_ptr, *head;
-+  int i;
-+  bit32u base = HalDev->dev_base;
-+  int rc = EC_NO_ERRORS;
-+  int Ch = Mode & 0xFF;
-+  int Queue = (Mode>>8)&0xFF;
-+
-+  int WaitFlag = (Mode>>30)&1; /* This is for AAL5 testing only */                     /* ~GSG 030508 */
-+  int Offset = (FragList[0].len >> 16);
-+  int PktType = (Mode>>16)&3; /* 0=AAL5, 1=Null AAL, 2=OAM, 3=Transparent */           /* +GSG 030508 */
-+  int AtmHeaderInData = (Mode>>31)&1;                                                 /* +GSG 030508 */
-+  int FragIndex = 0;
-+
-+  if (HalDev->State != enOpened)
-+     return(EC_CPPI|EC_FUNC_SEND|EC_VAL_INVALID_STATE);
-+
-+  if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0)                    /*MJH~030611*/ /*PITS 148*/
-+    return(EC_AAL5 |EC_FUNC_SEND|EC_VAL_INVALID_CH);              /*+GSG 030303*/
-+
-+  HalDev->OsFunc->CriticalOn();
-+
-+  tcb_ptr = head = HalDev->TcbPool[Ch][Queue];
-+
-+  if (tcb_ptr)
-+    {
-+
-+     /* these two TCB words are only valid on SOP */
-+     if (AtmHeaderInData == 1)
-+       {
-+        tcb_ptr->AtmHeader = 0;  /* bug fix for transparent mode PTI problem */
-+        /* Expect AtmHeader in the data */
-+        tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++) << 24;
-+        tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++) << 16;
-+        tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++) << 8;
-+        tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++);
-+
-+        /* decrement data buffer length accordingly */
-+        FragList[FragIndex].len -= ATM_HEADER_SIZE;
-+
-+        /* if the first fragment was ATM Header only, go to next fragment for loop */
-+        if (FragList[FragIndex].len == 0)
-+          FragIndex++;
-+
-+        /* No CPCS_UU/CPI if not AAL5 */
-+        tcb_ptr->Word5 = ((PktType & 0x3)<<16);
-+       }
-+      else
-+       {
-+        /* calculate AtmHeader from fields */
-+        tcb_ptr->AtmHeader = atmheader(HalDev->ChData[Ch].Gfc, /* ~GSG 030306 */
-+          HalDev->ChData[Ch].Vpi, HalDev->ChData[Ch].Vci,
-+          HalDev->ChData[Ch].Pti, HalDev->ChData[Ch].Clp);
-+
-+        tcb_ptr->Word5 = HalDev->ChData[Ch].CpcsUU | ((HalDev->ChData[Ch].PktType &0x3)<<16);
-+       }
-+
-+     for (i=FragIndex; i<FragCount; i++)
-+
-+       {
-+        /* Setup Tx mode and size */
-+        tcb_ptr->HNext    = VirtToPhys((bit32 *)tcb_ptr->Next) - HalDev->offset;
-+        tcb_ptr->Off_BLen = FragList[i].len;
-+
-+        if (i==0)
-+          tcb_ptr->Off_BLen |= (Offset << 16);
-+
-+        tcb_ptr->mode     = 0;  /* MUST clear this for each frag !!! */
-+        tcb_ptr->BufPtr   = VirtToPhys((bit32 *)FragList[i].data) -
-+          HalDev->offset;
-+
-+        /* first fragment */
-+        if (i == 0)
-+          {
-+           tcb_ptr->mode |= CB_SOF_BIT;
-+
-+          }
-+
-+        tcb_ptr->mode |= (PacketSize | CB_OWNERSHIP_BIT);
-+        tcb_ptr->OsInfo = OsSendInfo;
-+
-+        if (i == (FragCount - 1))
-+          {
-+           /* last fragment */
-+           tcb_ptr->mode |= CB_EOF_BIT;
-+
-+           /* since this is the last fragment, set the TcbPool pointer before
-+              nulling out the Next pointers */
-+
-+           HalDev->TcbPool[Ch][Queue] = tcb_ptr->Next;
-+
-+           tcb_ptr->Next = 0;
-+           tcb_ptr->HNext = 0;
-+
-+           /* In the Tx Interrupt handler, we will need to know which TCB is EOP,
-+              so we can save that information in the SOP */
-+           head->Eop = tcb_ptr;
-+
-+           /* Emerald fix 10/29 */
-+       osfuncDataCacheHitWriteback((void *)tcb_ptr, 16);
-+
-+       osfuncDataCacheHitWriteback((void *)((bit32u)tcb_ptr + 16), 16);
-+
-+          }
-+         else
-+          {
-+       /* Emerald fix 10/29 */
-+       osfuncDataCacheHitWriteback((void *)tcb_ptr, 16);
-+
-+       osfuncDataCacheHitWriteback((void *)((bit32u)tcb_ptr + 16), 16);
-+
-+           tcb_ptr = tcb_ptr->Next;  /* what about the end of TCB list?? */
-+
-+           if (tcb_ptr == 0)
-+             {
-+          rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_OUT_OF_TCBS;
-+              goto ExitSend;
-+             }
-+      }
-+       } /* for */
-+
-+     /* put it on the high priority queue */
-+     if (HalDev->TxActQueueHead[Ch][Queue] == 0)
-+       {
-+        HalDev->TxActQueueHead[Ch][Queue]=head;
-+        HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr;
-+/*+GSG 030303*//*+GSG 030303*/
-+        if (!HalDev->TxActive[Ch][Queue])
-+          {
-+
-+           if (!WaitFlag)
-+         {
-+
-+          /* write CPPI TX HDP */
-+              (*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( Queue )))  = VirtToPhys(head)  - HalDev->offset;
-+              HalDev->TxActive[Ch][Queue]=TRUE;
-+
-+         }
-+
-+          }
-+       }
-+      else
-+       {
-+        HalDev->TxActQueueTail[Ch][Queue]->Next=head;
-+        /* Emerald fix 10/29 */
-+        *((bit32u *) VirtToVirtNoCache(&HalDev->TxActQueueTail[Ch][Queue]->HNext))=VirtToPhys(head)  - HalDev->offset;
-+        HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr;
-+/*+GSG 030303*//*+GSG 030303*/
-+       }
-+     rc = EC_NO_ERRORS;
-+     goto ExitSend;
-+    } /* if (tcb_ptr) */
-+   else
-+    {
-+     rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_NO_TCBS;
-+     goto ExitSend;
-+    }
-+ExitSend:
-+
-+    HalDev->OsFunc->CriticalOff();
-+    return(rc);
-+  }
-+
-+/*
-+ *  This function processes receive interrupts.  It traverses the receive
-+ *  buffer queue, extracting the data and passing it to the upper layer software via
-+ *  osReceive().  It handles all error conditions and fragments without valid data by
-+ *  immediately returning the RCB's to the RCB pool.
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
-+ *  @param   Ch       Channel Number.
-+ *  @param   MoreWork Flag that indicates that there is more work to do when set to 1.
-+ *
-+ *  @return  0 if OK, non-zero otherwise.
-+ */
-+static int RxInt(HAL_DEVICE *HalDev, int Ch, int *MoreWork)
-+  {
-+  HAL_RCB *CurrentRcb, *LastRcb=0, *SopRcb, *EofRcb, *EopRcb;
-+  bit32u RxBufStatus,PacketsServiced, RxPktLen = 0, RxSopStatus,
-+    FrmFrags, TotalFrags, CurrDmaLen, DmaLen, FrmLen;
-+  int base = HalDev->dev_base, Ret;
-+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+  int RxServiceMax = HalDev->ChData[Ch].RxServiceMax;
-+  int FragIndex; /* +GSG 030508 */
-+  int EarlyReturn = 0; /* +GSG 030521 */
-+
-+  bit32u PktType, ExpDmaSize, Cells;
-+  int PassHeader=0;
-+
-+  int mode;
-+
-+  bit32u SopOffset;
-+
-+  if(HalDev->NeedsCount) /* +MJH 030410 */
-+    NeedsCheck(HalDev);  /* +MJH 030410 */
-+
-+  /* Handle case of teardown interrupt */
-+  if (HalDev->RxTeardownPending[Ch] != 0)
-+    {
-+     Ret = RxTeardownInt(HalDev, Ch);
-+     if (Ret == 0)
-+       {                                                              /*+GSG 030303*/
-+        *MoreWork = 0; /* bug fix 1/6 */                              /*+GSG 030303*/
-+        return (EC_NO_ERRORS);
-+       }                                                              /*+GSG 030303*/
-+    }
-+
-+  CurrentRcb=HalDev->RxActQueueHead[Ch];
-+
-+  osfuncDataCacheHitInvalidate((void*)CurrentRcb, 16);
-+
-+  RxBufStatus=CurrentRcb->mode;
-+
-+  /* I think I need to do this to ensure that i read UuCpi properly,
-+     which is on the second cache line of the Rcb */
-+  osfuncDataCacheHitInvalidate((void*)((bit32u)CurrentRcb+16), 16);
-+
-+  PacketsServiced=0;
-+  HalDev->InRxInt[Ch]=TRUE;
-+
-+  while((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)&&
-+    (PacketsServiced<RxServiceMax)) /* ~GSG 030307 */
-+    {
-+
-+    PacketsServiced++; /* ~GSG 030307 */
-+    SopRcb=CurrentRcb;
-+    RxSopStatus=RxBufStatus;
-+
-+    RxPktLen = RxSopStatus&CB_SIZE_MASK;
-+    /* Not sure what MAC needs to do for next block */
-+
-+    PktType=((SopRcb->UuCpi & 0x00030000) >> 16);                           /* GSG ~030508 */
-+    /* Calculate the expected DMA length */
-+    if (RxPktLen != 0)
-+      {
-+       Cells=RxPktLen/48;
-+       if ((RxPktLen%48) > 40)
-+         Cells++;
-+       if (PktType == PKT_TYPE_AAL5)                                        /* ~GSG 030508 */
-+         Cells++;
-+       ExpDmaSize=Cells*48;
-+      }
-+     else
-+      {
-+       ExpDmaSize=0;
-+      }
-+
-+    SopOffset=(SopRcb->Off_BLen&CB_OFFSET_MASK)>>16;
-+
-+    CurrDmaLen=0;
-+    FrmFrags=0;
-+    TotalFrags=0;
-+    FragIndex=0;
-+    FrmLen=0;
-+    EofRcb=0;
-+
-+/* +GSG 030508 */
-+    if ((PktType == PKT_TYPE_OAM) || (PktType == PKT_TYPE_TRANS))            /* +GSG 030508 */
-+      {                                                                      /* +GSG 030508 */
-+       /* first frag is ATM Header */                                        /* +GSG 030508 */
-+       PassHeader = 1;                                                       /* +GSG 030508 */
-+       HalDev->fraglist[FragIndex].data = (void *)&SopRcb->AtmHeader;        /* +GSG 030508 */
-+       HalDev->fraglist[FragIndex].len = 4;                                  /* +GSG 030508 */
-+       HalDev->fraglist[FragIndex].OsInfo = SopRcb->OsInfo;                  /* +GSG 030701 */
-+       FragIndex++;                                                          /* +GSG 030508 */
-+      }                                                                      /* +GSG 030508 */
-+/* +GSG 030508 */
-+
-+    do
-+      {
-+
-+      DmaLen=CurrentRcb->Off_BLen&CB_SIZE_MASK;
-+
-+      CurrDmaLen+=DmaLen;
-+      FrmLen+=DmaLen;
-+      TotalFrags++;
-+      if (!EofRcb)
-+        {
-+        HalDev->fraglist[FragIndex].data=((char *)CurrentRcb->DatPtr);       /* ~GSG 030508 */
-+
-+        HalDev->fraglist[FragIndex].data+=((FrmFrags==0)?SopOffset:0);       /* ~GSG 030508 */
-+
-+        HalDev->fraglist[FragIndex].len=DmaLen;                              /* ~GSG 030508 */
-+
-+        /* GSG 12/9 */
-+        HalDev->fraglist[FragIndex].OsInfo = CurrentRcb->OsInfo;             /* ~GSG 030508 */
-+
-+        /* Upper layer must do the data invalidate */
-+
-+        FrmFrags++;
-+        FragIndex++;                                                         /* ~GSG 030508 */
-+        if (FrmLen>=RxPktLen)
-+          EofRcb=CurrentRcb;
-+        }
-+      LastRcb=CurrentRcb;
-+      CurrentRcb=LastRcb->Next;
-+      if (CurrentRcb)
-+        {
-+         osfuncDataCacheHitInvalidate((void*)CurrentRcb,16);
-+         /*         RxBufStatus=CurrentRcb->mode; */ /*DRB~030522*/
-+        }
-+      }while(((LastRcb->mode&CB_EOF_BIT)==0)&&(CurrentRcb));
-+
-+    /* New location for interrupt acknowledge */
-+    /* Write the completion pointer */
-+    (*(pRX_CPPI_COMP_PTR( base )+( Ch *64)))  = VirtToPhys(LastRcb) - HalDev->offset;
-+
-+    EopRcb=LastRcb;
-+    HalDev->RxActQueueHead[Ch]=CurrentRcb;
-+    HalDev->RxActQueueCount[Ch]-=TotalFrags;
-+
-+    if (LastRcb->mode&CB_EOQ_BIT)
-+      {
-+       if (CurrentRcb)
-+         {
-+
-+          HalDev->Stats.RxMisQCnt[Ch]++;
-+
-+          (*(pRX_DMA_STATE_WORD_1( base )+( Ch *64)))  = LastRcb->HNext;
-+         }
-+        else
-+         {
-+
-+          /* Rx EOQ */
-+          HalDev->Stats.RxMisQCnt[Ch]++;
-+
-+          HalDev->RxActive[Ch]=FALSE;
-+         }
-+      }
-+
-+    EopRcb->Next=0;
-+
-+    /* setup SopRcb for the packet */
-+    SopRcb->Eop=(void*)EopRcb;
-+    SopRcb->FragCount=TotalFrags;
-+
-+    if ((ExpDmaSize!=CurrDmaLen)||(RxSopStatus&RX_ERROR_MASK))
-+      {
-+       /* check for Rx errors (only valid on SOP) */
-+       if (RxSopStatus & RX_ERROR_MASK)
-+         {
-+          if (RxSopStatus & CRC_ERROR_MASK)
-+            HalDev->Stats.CrcErrors[Ch]++;
-+
-+          if (RxSopStatus & LENGTH_ERROR_MASK)
-+            HalDev->Stats.LenErrors[Ch]++;
-+
-+          if (RxSopStatus & ABORT_ERROR_MASK)
-+            HalDev->Stats.AbortErrors[Ch]++;
-+
-+          if (RxSopStatus & STARV_ERROR_MASK)
-+            HalDev->Stats.StarvErrors[Ch]++;
-+         }
-+        else
-+         {
-+          HalDev->Stats.DmaLenErrors[Ch]++; /* different type of length error */
-+         }
-+
-+       EarlyReturn = 1;
-+      }
-+
-+    /* do not pass up the packet if we're out of RCB's (or have an errored packet)*/
-+    if ((CurrentRcb == 0) || (EarlyReturn == 1))
-+      {
-+       halRxReturn((HAL_RECEIVEINFO *)SopRcb,0);
-+      }
-+     else
-+      {
-+
-+      if (EopRcb!=EofRcb)
-+        {
-+         HAL_RCB *FirstEmptyRcb;
-+
-+         FirstEmptyRcb = EofRcb->Next;
-+         FirstEmptyRcb->Eop = (void*)EopRcb;
-+         FirstEmptyRcb->FragCount = TotalFrags-FrmFrags;
-+
-+         halRxReturn((HAL_RECEIVEINFO *)FirstEmptyRcb,0);
-+         SopRcb->Eop=(void*)EofRcb;
-+         SopRcb->FragCount=FrmFrags;
-+         EofRcb->Next=0;  /* Optional */
-+        }
-+
-+      mode = Ch | (PktType << 16) | (PassHeader << 31);   /* ~GSG 030508 */
-+
-+      OsFunc->Receive(HalDev->OsDev,HalDev->fraglist,FragIndex,RxPktLen,             /* ~GSG 030508 */
-+           (HAL_RECEIVEINFO *)SopRcb,mode);
-+      } /* else */
-+    
-+    if (CurrentRcb)                                                                  /*MJH+030522*/
-+      {
-+       RxBufStatus=CurrentRcb->mode;
-+      }
-+    } /* while */
-+
-+  if ((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)) /*~GSG 030307*/
-+    {
-+     *MoreWork = 1;
-+    }
-+   else
-+    {
-+     *MoreWork = 0;
-+    }
-+
-+  if (PacketsServiced != 0)
-+    {
-+      /* REMOVED when removing InRxInt */
-+     if ((!HalDev->RxActive[Ch]) && (HalDev->RxActQueueCount[Ch]))
-+       {
-+        (*(pRX_DMA_STATE_WORD_1( base )+( Ch *64)))  = VirtToPhys(HalDev->RxActQueueHead[Ch]);
-+    HalDev->RxActive[Ch]=TRUE;
-+       }
-+    }
-+
-+  HalDev->InRxInt[Ch]=FALSE;
-+
-+  /* update stats */
-+  HalDev->Stats.RxPacketsServiced[Ch] += PacketsServiced;
-+  HalDev->Stats.RxTotal += PacketsServiced;
-+  if (HalDev->Stats.RxMaxServiced < PacketsServiced)
-+    HalDev->Stats.RxMaxServiced = PacketsServiced;
-+
-+  return (EC_NO_ERRORS);
-+  }
-+
-+/*
-+ *  This function processes transmit interrupts.  It traverses the
-+ *  transmit buffer queue, detecting sent data buffers and notifying the upper
-+ *  layer software via osSendComplete().  (for SAR, i originally had this split
-+ *  into two functions, one for each queue, but joined them on 8/8/02)
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
-+ *  @param   Queue    Queue number to service (always 0 for MAC, Choose 1 for SAR to service low priority queue)
-+ *  @param   MoreWork Flag that indicates that there is more work to do when set to 1.
-+ *
-+ *  @return  0 if OK, non-zero otherwise.
-+ */
-+static int TxInt(HAL_DEVICE *HalDev, int Ch, int Queue, int *MoreWork)
-+  {
-+  HAL_TCB *CurrentTcb,*LastTcbProcessed,*FirstTcbProcessed;
-+  int PacketsServiced;
-+  bit32u TxFrameStatus;
-+  int base = HalDev->dev_base, Ret;
-+  int TxServiceMax = HalDev->ChData[Ch].TxServiceMax;
-+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+
-+  int OtherQueue = Queue^1;
-+
-+/*+GSG 030303*//*+GSG 030303*/
-+
-+  /* Handle case of teardown interrupt.  This must be checked at
-+     the top of the function rather than the bottom, because
-+     the normal data processing can wipe out the completion
-+     pointer which is used to determine teardown complete. */
-+  if (HalDev->TxTeardownPending[Ch] != 0)
-+    {
-+     Ret = TxTeardownInt(HalDev, Ch, Queue);
-+     if (Ret == 0)
-+       {                                                              /*+GSG 030303*/
-+        *MoreWork = 0; /* bug fix 1/6 */                              /*+GSG 030303*/
-+        return (EC_NO_ERRORS);
-+       }                                                              /*+GSG 030303*/
-+    }
-+
-+  CurrentTcb = HalDev->TxActQueueHead[Ch][Queue];
-+  FirstTcbProcessed=CurrentTcb;
-+
-+  if (CurrentTcb==0)
-+    {
-+     /* I saw this error a couple of times when multi-channels were added */
-+     dbgPrintf("[cppi TxInt()]TxH int with no TCB in queue!\n");
-+     dbgPrintf("              Ch=%d, CurrentTcb = 0x%08x\n", Ch, (bit32u)CurrentTcb);
-+     dbgPrintf("              HalDev = 0x%08x\n", (bit32u)HalDev);
-+     osfuncSioFlush();
-+     return(EC_CPPI|EC_FUNC_TXINT|EC_VAL_NULL_TCB);
-+    }
-+
-+  osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16);
-+  TxFrameStatus=CurrentTcb->mode;
-+  PacketsServiced=0;
-+
-+  /* should the ownership bit check be inside of the loop?? could make it a
-+     while-do loop and take this check away */
-+  if ((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
-+    {
-+    OsFunc->CriticalOn(); /* +GSG 030307 */
-+    do
-+      {
-+      /* Pop TCB(s) for packet from the stack */
-+      LastTcbProcessed=CurrentTcb->Eop;
-+
-+      /* new location for acknowledge */
-+      /* Write the completion pointer */
-+      (*(pTXH_CPPI_COMP_PTR( base )+( Ch *64)+( Queue )))  = VirtToPhys(LastTcbProcessed);
-+
-+      HalDev->TxActQueueHead[Ch][Queue] = LastTcbProcessed->Next;
-+
-+/*+GSG 030303*//*+GSG 030303*/
-+
-+      osfuncDataCacheHitInvalidate((void *)LastTcbProcessed, 16);
-+
-+      if (LastTcbProcessed->mode&CB_EOQ_BIT)
-+        {
-+        if (LastTcbProcessed->Next)
-+          {
-+       /* Misqueued packet */
-+
-+           HalDev->Stats.TxMisQCnt[Ch][Queue]++;
-+
-+           (*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( Queue )))  = LastTcbProcessed->HNext;
-+          }
-+         else
-+          {
-+       /* Tx End of Queue */
-+
-+       HalDev->Stats.TxEOQCnt[Ch][Queue]++;
-+
-+       HalDev->TxActive[Ch][Queue]=FALSE;
-+          }
-+        }
-+
-+      OsFunc->SendComplete(CurrentTcb->OsInfo);
-+
-+      /* Push Tcb(s) back onto the stack */
-+      CurrentTcb = LastTcbProcessed->Next;
-+
-+      LastTcbProcessed->Next=HalDev->TcbPool[Ch][Queue];
-+
-+      HalDev->TcbPool[Ch][Queue]=FirstTcbProcessed;
-+
-+      PacketsServiced++;
-+
-+      TxFrameStatus=CB_OWNERSHIP_BIT;
-+      /* set the first(SOP) pointer for the next packet */
-+      FirstTcbProcessed = CurrentTcb;
-+      if (CurrentTcb)
-+        {
-+     osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16);
-+         TxFrameStatus=CurrentTcb->mode;
-+        }
-+
-+      }while(((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
-+             &&(PacketsServiced<TxServiceMax));
-+
-+    /* this fixes the SAR TurboDSL hardware bug (multiple queue failure) */
-+    if (HalDev->TxActive[Ch][OtherQueue])
-+      if (HalDev->TxActQueueHead[Ch][OtherQueue])
-+        if ((*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( OtherQueue )))  == 0)
-+          {
-+           osfuncDataCacheHitInvalidate(HalDev->TxActQueueHead[Ch][OtherQueue],16);
-+           if ((HalDev->TxActQueueHead[Ch][OtherQueue]->mode) & CB_OWNERSHIP_BIT)
-+             { 
-+              HalDev->TurboDslErrors++;
-+              (*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( OtherQueue )))  = 
-+                VirtToPhys(HalDev->TxActQueueHead[Ch][OtherQueue]);
-+             }
-+          }
-+
-+    OsFunc->CriticalOff(); /* +GSG 030307 */
-+    if (((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
-+             &&(PacketsServiced==TxServiceMax))
-+      {
-+       *MoreWork = 1;
-+      }
-+     else
-+      {
-+       *MoreWork = 0;
-+      }
-+    }
-+
-+  /* update stats */
-+  HalDev->Stats.TxPacketsServiced[Ch][Queue] += PacketsServiced;
-+  HalDev->Stats.TxTotal += PacketsServiced;
-+  if (HalDev->Stats.TxMaxServiced[Ch][Queue] < PacketsServiced)
-+    HalDev->Stats.TxMaxServiced[Ch][Queue] = PacketsServiced;
-+
-+  return(EC_NO_ERRORS);
-+  }
-+
-+/**
-+ *  @ingroup CPHAL_Functions
-+ *  This function performs a teardown for the given channel.  The value of the
-+ *  Mode parameter controls the operation of the function, as documented below.
-+ *
-+ *  Note: If bit 3 of Mode is set, this call is blocking, and will not return
-+ *  until the teardown interrupt has occurred and been processed. While waiting
-+ *  for a blocking teardown to complete, ChannelTeardown() will signal the OS
-+ *  (via Control(.."Sleep"..)) to allow the OS to perform other tasks if
-+ *  necessary.  If and only if bit 3 of Mode is clear, the CPHAL will call the
-+ *  OS TeardownComplete() function to indicate that the teardown has completed.
-+ *
-+ *  @param   HalDev  CPHAL module instance. (set by xxxInitModule())
-+ *  @param   Ch      Channel number.
-+ *  @param   Mode    Bit 0 (LSB): Perform Tx teardown (if set).<BR>
-+ *                   Bit 1: Perform Rx teardown (if set). <BR>
-+ *                   Bit 2: If set, perform full teardown (free buffers/descriptors).
-+ *                          If clear, perform partial teardown (keep buffers). <BR>
-+ *                   Bit 3 (MSB): If set, call is blocking.
-+ *                            If clear, call is non-blocking.
-+ *
-+ *  @return  EC_NO_ERRORS (ok). <BR>
-+ *           Possible Error Codes:<BR>
-+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *           @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
-+ *           @ref EC_VAL_TX_TEARDOWN_ALREADY_PEND "EC_VAL_TX_TEARDOWN_ALREADY_PEND"<BR>
-+ *           @ref EC_VAL_RX_TEARDOWN_ALREADY_PEND "EC_VAL_RX_TEARDOWN_ALREADY_PEND"<BR>
-+ *           @ref EC_VAL_TX_CH_ALREADY_TORNDOWN "EC_VAL_TX_CH_ALREADY_TORNDOWN"<BR>
-+ *           @ref EC_VAL_RX_CH_ALREADY_TORNDOWN "EC_VAL_RX_CH_ALREADY_TORNDOWN"<BR>
-+ *           @ref EC_VAL_TX_TEARDOWN_TIMEOUT "EC_VAL_TX_TEARDOWN_TIMEOUT"<BR>
-+ *           @ref EC_VAL_RX_TEARDOWN_TIMEOUT "EC_VAL_RX_TEARDOWN_TIMEOUT"<BR>
-+ *           @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR>
-+ */
-+static int halChannelTeardown(HAL_DEVICE *HalDev, int Ch, bit32 Mode)
-+  {
-+   int DoTx, DoRx, Sleep=2048, timeout=0;                         /*MJH~030306*/
-+   bit32u base = HalDev->dev_base;
-+
-+/* Set the module, used for error returns */
-+
-+   int Ret;
-+
-+   /* AAL5 only supports tearing down both sides at once (currently)*/
-+   Mode = (Mode | TX_TEARDOWN | RX_TEARDOWN);
-+
-+   DoTx = (Mode & TX_TEARDOWN);
-+   DoRx = (Mode & RX_TEARDOWN);
-+
-+   if (HalDev->State < enInitialized)
-+     return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_STATE);
-+
-+   if ((Ch < 0) || (Ch > MAX_AAL5_CHAN ))
-+     {
-+     return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_CH);
-+     }
-+
-+   /* set teardown pending bits before performing the teardown, because they
-+      will be used in the int handler (this is done for AAL5) */
-+   if (DoTx)
-+     {
-+      if (HalDev->TxTeardownPending[Ch] != 0)
-+        return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_ALREADY_PEND);
-+
-+      /* If a full teardown, this also means that the user must
-+      setup all channels again to use them */
-+      if (Mode & FULL_TEARDOWN)
-+        HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0;
-+
-+      if (HalDev->State < enOpened)
-+        {
-+         /* if the hardware has never been opened, the channel has never actually
-+         been setup in the hardware, so I just need to reset the software flag
-+         and leave */
-+         HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0;
-+         return (EC_NO_ERRORS);
-+    }
-+       else
-+    {
-+         if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0)
-+       {
-+            return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_TX_CH_ALREADY_TORNDOWN);
-+       }
-+
-+         /* set teardown flag */
-+         HalDev->TxTeardownPending[Ch] = Mode;
-+    }
-+     }
-+
-+   if (DoRx)
-+     {
-+      if (HalDev->RxTeardownPending[Ch] != 0)
-+        return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_ALREADY_PEND);
-+
-+      if (Mode & FULL_TEARDOWN)
-+        HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0;
-+
-+      if (HalDev->State < enOpened)
-+        {
-+         HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0;
-+         return (EC_NO_ERRORS);
-+    }
-+       else
-+    {
-+         if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == 0)
-+           return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_RX_CH_ALREADY_TORNDOWN);
-+
-+         HalDev->RxTeardownPending[Ch] = Mode;
-+    }
-+     }
-+
-+   /* Perform Tx Teardown Duties */
-+   if ((DoTx) && (HalDev->State == enOpened))
-+     {
-+      /* Request TX channel teardown */
-+      (TX_CPPI_TEARDOWN_REG( base ))  = Ch;
-+
-+      /* wait until teardown has completed */
-+      if (Mode & BLOCKING_TEARDOWN)
-+        {
-+     timeout = 0;
-+         while (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE)
-+       {
-+            osfuncSleep(&Sleep);
-+
-+            timeout++;
-+        if (timeout > 100000)
-+          {
-+               return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_TIMEOUT);
-+          }
-+       }
-+    }
-+     } /* if DoTx */
-+
-+   /* Perform Rx Teardown Duties */
-+   if ((DoRx) && (HalDev->State == enOpened))
-+     {
-+
-+      /* call main teardown routine for Rx */
-+      Ret = HalDev->SarFunc->ChannelTeardown(HalDev->SarDev, Ch, Mode);
-+      if (Ret) return (Ret);
-+
-+      if (Mode & BLOCKING_TEARDOWN)
-+        {
-+     timeout = 0;
-+         while (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)
-+       {
-+            osfuncSleep(&Sleep);
-+
-+            timeout++;
-+        if (timeout > 100000)
-+          {
-+               return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_TIMEOUT);
-+          }
-+       }
-+        }
-+     } /* if DoRx */
-+
-+   return (EC_NO_ERRORS);
-+  }
-+
-+/**
-+ *  @ingroup CPHAL_Functions
-+ *  This function closes the CPHAL module.  The module will be reset.
-+ *  The Mode parameter should be used to determine the actions taken by
-+ *  Close().
-+ *
-+ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())
-+ *  @param   Mode     Indicates actions to take on close.  The following integer
-+ *                    values are valid: <BR>
-+ *                    1:  Does not free buffer resources, init parameters remain
-+ *                        intact.  User can then call Open() without calling Init()
-+ *                        to attempt to reset the device and bring it back to the
-+ *                        last known state.<BR>
-+ *                    2:  Frees the buffer resources, but keeps init parameters.  This
-+ *                        option is a more aggressive means of attempting a device reset.
-+ *                    3:  Frees the buffer resources, and clears all init parameters. <BR>
-+ *                        At this point, the caller would have to call to completely
-+ *                        reinitialize the device (Init()) before being able to call
-+ *                        Open().  Use this mode if you are shutting down the module
-+ *                        and do not plan to restart.
-+ *
-+ *  @return  EC_NO_ERRORS (ok).<BR>
-+ *           Possible Error Codes:<BR>
-+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ *           Any error code from halChannelTeardown().<BR>
-+ */
-+static int halClose(HAL_DEVICE *HalDev, bit32 Mode)
-+  {
-+   int Ch, Inst, Ret;
-+   OS_DEVICE *TmpOsDev;
-+   OS_FUNCTIONS *TmpOsFunc;
-+   HAL_FUNCTIONS *TmpHalFunc;
-+   char *TmpDeviceInfo;
-+
-+   CPSAR_FUNCTIONS *TmpSarFunc;
-+   CPSAR_DEVICE *TmpSarDev;
-+
-+   /* Verify proper device state */
-+   if (HalDev->State != enOpened)
-+     return (EC_AAL5  | EC_FUNC_CLOSE|EC_VAL_INVALID_STATE);
-+
-+   /* Teardown all open channels */
-+   for (Ch = 0; Ch <= MAX_AAL5_CHAN ; Ch++)
-+     {
-+      if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE)
-+        {
-+         if (Mode == 1)
-+           {
-+            Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN);
-+            if (Ret) return (Ret);
-+           }
-+          else
-+           {
-+            Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN);
-+            if (Ret) return (Ret);
-+           }
-+        }
-+
-+      if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)
-+        {
-+         if (Mode == 1)
-+           {
-+            Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN);
-+            if (Ret) return (Ret);
-+           }
-+          else
-+           {
-+            Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN);
-+            if (Ret) return (Ret);
-+           }
-+        }
-+     }
-+
-+   /* free fraglist in HalDev */
-+   HalDev->OsFunc->Free(HalDev->fraglist);
-+   HalDev->fraglist = 0;
-+
-+   /* unregister the interrupt */
-+   HalDev->OsFunc->IsrUnRegister(HalDev->OsDev, HalDev->interrupt);
-+
-+   /* Disable the Tx CPPI DMA */
-+   TX_CPPI_CTL_REG(HalDev->dev_base) = 0;
-+
-+   /* Disable the Rx CPPI DMA */
-+   RX_CPPI_CTL_REG(HalDev->dev_base) = 0;
-+
-+   /* Close the SAR hardware - puts the device in reset if this module is the
-+      "last one out" */
-+   HalDev->SarFunc->Close(HalDev->SarDev, Mode);
-+
-+   /* If mode is 3, than clear the HalDev and set next state to DevFound*/
-+   if (Mode == 3)
-+     {
-+      /* I need to keep the HalDev parameters that were setup in InitModule */
-+      TmpOsDev = HalDev->OsDev;
-+      TmpOsFunc = HalDev->OsFunc;
-+      TmpDeviceInfo = HalDev->DeviceInfo;
-+
-+      TmpSarFunc = HalDev->SarFunc;
-+      TmpSarDev = HalDev->SarDev;
-+
-+      TmpHalFunc = HalDev->HalFuncPtr;
-+      Inst = HalDev->Inst;
-+
-+      /* Clear HalDev */
-+
-+      HalDev->OsFunc->Memset(HalDev, 0, sizeof(HAL_DEVICE));
-+
-+      /* Restore key parameters */
-+      HalDev->OsDev = TmpOsDev;
-+      HalDev->OsFunc = TmpOsFunc;
-+      HalDev->DeviceInfo = TmpDeviceInfo;
-+
-+      HalDev->SarFunc = TmpSarFunc;
-+      HalDev->SarDev = TmpSarDev;
-+
-+      HalDev->HalFuncPtr = TmpHalFunc;
-+      HalDev->Inst = Inst;
-+
-+      HalDev->State = enDevFound;
-+     }
-+    else
-+     {
-+      HalDev->State = enInitialized;
-+     }
-+
-+   return(EC_NO_ERRORS);
-+  }
-diff -urN linux.old/drivers/atm/sangam_atm/cpremap_cpaal5.c linux.dev/drivers/atm/sangam_atm/cpremap_cpaal5.c
---- linux.old/drivers/atm/sangam_atm/cpremap_cpaal5.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpremap_cpaal5.c	2005-08-23 04:46:50.084845672 +0200
-@@ -0,0 +1,27 @@
-+#ifndef _INC_CPREMAP_C
-+#define _INC_CPREMAP_C
-+
-+#ifdef __ADAM2
-+static inline void osfuncDataCacheHitInvalidate(void *ptr, int Size)
-+  {
-+  asm(" cache  17, (%0)" : : "r" (ptr));
-+  }
-+
-+static inline void osfuncDataCacheHitWriteback(void *ptr, int Size)
-+  { 
-+  asm(" cache  25, (%0)" : : "r" (ptr));
-+  }
-+
-+#else
-+  #define osfuncDataCacheHitInvalidate(MemPtr, Size)   HalDev->OsFunc->DataCacheHitInvalidate(MemPtr, Size)
-+  #define osfuncDataCacheHitWriteback(MemPtr, Size)    HalDev->OsFunc->DataCacheHitWriteback(MemPtr, Size)
-+#endif
-+
-+/*
-+#define osfuncDataCacheHitInvalidate(ptr, Size) asm(" cache  17, (%0)" : : "r" (ptr))
-+#define osfuncDataCacheHitWriteback(ptr, Size)  asm(" cache  25, (%0)" : : "r" (ptr))
-+*/
-+
-+
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/cpremap_cpsar.c linux.dev/drivers/atm/sangam_atm/cpremap_cpsar.c
---- linux.old/drivers/atm/sangam_atm/cpremap_cpsar.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpremap_cpsar.c	2005-08-23 04:46:50.084845672 +0200
-@@ -0,0 +1,27 @@
-+#ifndef _INC_CPREMAP_C
-+#define _INC_CPREMAP_C
-+
-+#ifdef __ADAM2
-+static inline void osfuncDataCacheHitInvalidate(void *ptr, int Size)
-+  {
-+  asm(" cache  17, (%0)" : : "r" (ptr));
-+  }
-+
-+static inline void osfuncDataCacheHitWriteback(void *ptr, int Size)
-+  { 
-+  asm(" cache  25, (%0)" : : "r" (ptr));
-+  }
-+
-+#else
-+  #define osfuncDataCacheHitInvalidate(MemPtr, Size)   HalDev->OsFunc->DataCacheHitInvalidate(MemPtr, Size)
-+  #define osfuncDataCacheHitWriteback(MemPtr, Size)    HalDev->OsFunc->DataCacheHitWriteback(MemPtr, Size)
-+#endif
-+
-+/*
-+#define osfuncDataCacheHitInvalidate(ptr, Size) asm(" cache  17, (%0)" : : "r" (ptr))
-+#define osfuncDataCacheHitWriteback(ptr, Size)  asm(" cache  25, (%0)" : : "r" (ptr))
-+*/
-+
-+
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/cpsar.c linux.dev/drivers/atm/sangam_atm/cpsar.c
---- linux.old/drivers/atm/sangam_atm/cpsar.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpsar.c	2005-08-23 04:46:50.086845368 +0200
-@@ -0,0 +1,881 @@
-+/**
-+ *  cpsar.c
-+ *
-+ *  TNETDxxxx Software Support\n
-+ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  This file contains the HAL for the CPSAR module.  In the software
-+ *  architecture, the CPSAR module is used exclusively by the AAL5 and AAL2
-+ *  CPHAL modules.  AAL5 and AAL2 may utilize the same CPSAR instance
-+ *  simulataneously.
-+ *
-+ *  version
-+ *      5Sep02 Greg        1.00  Original Version created.
-+ */
-+
-+/* register files */
-+#include "cp_sar_reg.h"  
-+
-+#define _CPHAL_CPSAR
-+#define _CPHAL 
-+
-+#define WAIT_THRESH           200000
-+#define IRAM_SIZE             1536
-+#define MAX_INST              2
-+
-+/*  OS Data Structure definition  */
-+
-+typedef void OS_PRIVATE;
-+typedef void OS_DEVICE;
-+typedef void OS_SENDINFO;
-+typedef void OS_RECEIVEINFO;
-+typedef void OS_SETUP;
-+
-+/*  CPHAL Data Structure definitions  */
-+
-+typedef struct cpsar_device  CPSAR_DEVICE;
-+typedef struct cpsar_device  HAL_DEVICE;
-+typedef void HAL_RECEIVEINFO;
-+
-+#define MAX_QUEUE  2
-+#define MAX_CHAN 19
-+
-+#include "cpcommon_cpsar.h"
-+#include "cpswhal_cpsar.h"
-+#include "cpsar.h"
-+#include "cpcommon_cpsar.c"
-+
-+static CPSAR_DEVICE *CpsarDev[MAX_INST]= {0,0};
-+
-+/*
-+ *  Returns statistics information.
-+ *
-+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())  
-+ *
-+ *  @return 0
-+ */
-+static int StatsGet3(CPSAR_DEVICE *HalDev)
-+  {
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpsar]StatsGet3(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+   /*
-+   dbgPrintf("CPSAR General Stats:\n");
-+   DispHexStat(HalDev, "Base Address",HalDev->dev_base);
-+   DispStat(HalDev, "Offset (VLYNQ)",HalDev->offset);
-+   DispStat(HalDev, "Debug Level",HalDev->debug);
-+   DispStat(HalDev, "Instance",HalDev->Inst);
-+   DispHexStat(HalDev, "Reset Address",HalDev->ResetBase);
-+   DispStat(HalDev, "Reset Bit",HalDev->ResetBit);
-+   */
-+   return (EC_NO_ERRORS);
-+  }
-+
-+/* +GSG 030407 */
-+static void SetOamMode(HAL_DEVICE *HalDev)
-+  {
-+   int Ch;
-+   volatile bit32u *pTmp;
-+   int OamMode = (1<<8);
-+
-+   /* any configuration of OamMode affects all VC's, including AAL2 */
-+   for (Ch = 0; Ch < MAX_CHAN; Ch++)
-+     {
-+      if (Ch < 16)
-+        pTmp = (pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base) + (Ch*64));
-+       else
-+        pTmp = (pPDSP_AAL2_RX_STATE_WORD_0(HalDev->dev_base) + ((Ch-16)*64));
-+
-+      if (HalDev->OamMode == 0)
-+        {
-+         *pTmp &=~ OamMode;
-+        }
-+       else
-+        {
-+         *pTmp |= OamMode;
-+        }
-+     }
-+  }
-+
-+static int halControl(CPSAR_DEVICE *HalDev, const char *Key, const char *Action, void *Value)
-+  {
-+   int KeyFound=0, ActionFound=0, rc=EC_NO_ERRORS, Ch;  /* +RC3.02*/
-+   char *TmpKey = (char *)Key;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpsar]halControl(HalDev:%08x, Key:%s, Action:%s, Value:%08x)\n", (bit32u)HalDev,
-+                Key, Action, (bit32u)Value);
-+      osfuncSioFlush();
-+     }
-+#endif  
-+
-+   if (HalDev->OsFunc->Strcmpi(Key, "Debug") == 0)
-+     {
-+      KeyFound=1; /* +RC3.02*/
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1; /* +RC3.02*/
-+         HalDev->debug = *(int *)Value;
-+        }
-+     }
-+
-+   /* +GSG 030407 */
-+   if (HalDev->OsFunc->Strcmpi(Key, "OamMode") == 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         HalDev->OamMode = *(int *)Value;
-+
-+         /* only do this if we're open */
-+         if (HalDev->OpenCount > 0)
-+           SetOamMode(HalDev);
-+        }
-+
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        {
-+         ActionFound=1;
-+         *(int *)Value = HalDev->OamMode;
-+        }
-+     }
-+
-+   if (HalDev->OsFunc->Strcmpi(Key, "Stats3") == 0)
-+     {
-+      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+        StatsGet3(HalDev);
-+     }
-+
-+   /* +RC3.02  (if statement) */
-+   /* Fixes PITS #98 */
-+   if (HalDev->OsFunc->Strstr(Key, "PdspEnable") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         
-+         /* Configure PDSP enable bit based on Value*/
-+         if (*(int *)Value & 1)
-+           {
-+            /* enable PDSP */
-+            PDSP_CTRL_REG(HalDev->dev_base) |= 0x2;
-+           }
-+          else
-+           {
-+            /* disable PDSP */
-+            PDSP_CTRL_REG(HalDev->dev_base) &=~ 0x2;
-+           }
-+        }
-+     }
-+
-+   if (HalDev->OsFunc->Strstr(Key, "FwdUnkVc.") != 0)
-+     {
-+      KeyFound=1;
-+      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+        {
-+         ActionFound=1;
-+         
-+         /* extract channel number */
-+         TmpKey += HalDev->OsFunc->Strlen("FwdUnkVc.");
-+         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+         /* Configure forwarding of unknown VCI/VPI cells */
-+         SAR_PDSP_FWD_UNK_VC_REG(HalDev->dev_base) = (((*(int*)Value)<<31) | Ch);
-+        }
-+     }
-+
-+   if (KeyFound == 0) /* +RC3.02 */
-+     rc = (EC_CPSAR|EC_FUNC_CONTROL|EC_VAL_KEY_NOT_FOUND); /* +RC3.02 */
-+
-+   if (ActionFound == 0) /* +RC3.02 */
-+     rc = (EC_CPSAR|EC_FUNC_CONTROL|EC_VAL_ACTION_NOT_FOUND); /* +RC3.02 */
-+
-+   return(rc);   /* ~RC3.02 */
-+  }
-+
-+/*
-+ * This function opens the specified channel.
-+ *  
-+ * @param   HalDev  CPHAL module instance. (set by cphalInitModule())   
-+ * @param   Ch      Channel number.
-+ *
-+ * @return  0 OK, Non-zero Not OK
-+ */
-+static int halChannelSetup(CPSAR_DEVICE *HalDev, CHANNEL_INFO *HalCh)
-+  {
-+  int i;
-+  int Ch = HalCh->Channel;
-+  int PdspChBlock = Ch;
-+  int PdspBlockOffset = 0;
-+  volatile bit32u *pTmp;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpsar]halChannelSetup(HalDev:%08x, HalCh:%08x)\n", (bit32u)HalDev,
-+                (bit32u)HalCh);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+  /* Figure out the correct offset from the start of the PDSP
-+     Scratchpad RAM (starting at 0x8050 in the SAR) */
-+  if (Ch > 15)
-+    {
-+     /* this is an AAL2 channel, which are channels 16-18 */
-+     PdspChBlock = Ch - 16;  
-+     /* Get the offset to the AAL2 portion of the block (in words) */
-+     PdspBlockOffset = NUM_PDSP_AAL5_STATE_WORDS + (PdspChBlock*64);
-+     /* Clear PDSP State RAM */
-+     /*pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset);
-+     for (i=0; i<NUM_PDSP_AAL2_STATE_WORDS; i++)
-+     *pTmp++ = 0;*/
-+    }
-+   else
-+    {
-+     /* Get the offset to the AAL5 portion of the block (in words) */
-+     PdspBlockOffset = (PdspChBlock*64);
-+     /* Clear PDSP State RAM */
-+     /*pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset);
-+     for (i=0; i<NUM_PDSP_AAL5_STATE_WORDS; i++)
-+     *pTmp++ = 0;*/
-+    }
-+
-+  /* Configure PDSP State RAM */
-+
-+  /* Setup TX PDSP State RAM */
-+  pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset);
-+  *pTmp++ = HalCh->TxVc_CellRate;        /* Set the cell rate in cells/sec */
-+  *pTmp++ = HalCh->TxVc_QosType;         /* Configure the QoS Type */
-+  *pTmp++ = HalCh->TxVc_Mbs;             /* Set minimum burst size */
-+  *pTmp++ = 0;                           /* (skip a register) */
-+  *pTmp++ = HalCh->TxVc_Pcr;             /* set the peak cell rate */
-+  *pTmp++ = 0;                           /* new addition 4.9.02 */
-+  *pTmp++ = HalCh->TxVc_AtmHeader;       /* give the ATM header */
-+  *pTmp++ = (HalCh->TxVc_OamTc << 8) 
-+            |(HalCh->TxVc_VpOffset);     /* Set the OAM TC Path and VP Offset */
-+   
-+  /* Setup RX PDSP State RAM */
-+  *pTmp++ = (HalCh->RxVc_OamCh)|
-+    (HalDev->OamMode << 8) |
-+    (HalCh->RxVc_OamToHost<<9);          /* Set OAM Channel, Mode, and ToHost options */
-+  *pTmp++ = HalCh->RxVc_AtmHeader;       /* ATM hdr put on firmware generated OAM */
-+  *pTmp++ = (HalCh->RxVc_VpOffset)|      /* Set Rx OAM TC Path and VP Offset */
-+    (HalCh->RxVc_OamTc<<8);                 
-+           
-+  /* Setup TX VP PDSP State RAM */
-+  pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset+16); /*GSG~030703 12->16 */
-+  *pTmp++ = HalCh->TxVp_AtmHeader;
-+  *pTmp++ = (HalCh->TxVp_OamTc << 8);
-+
-+  /* Setup RX VP PDSP State RAM */
-+  pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset+20); /*GSG~030703 16->20 */
-+  *pTmp++ = HalCh->RxVp_AtmHeader;
-+  *pTmp++ = (HalCh->RxVp_OamCh)|
-+    (HalCh->RxVp_OamTc<<8)|
-+    (HalCh->RxVp_OamToHost<<9);           /* Set OAM Channel, Mode, and ToHost options */
-+  *pTmp++ = 0;
-+  *pTmp++ = HalCh->RxVp_OamVcList;
-+
-+  /* Configure forwarding of unknown VCI/VPI cells */
-+  if (HalCh->PktType == 3)
-+    SAR_PDSP_FWD_UNK_VC_REG(HalDev->dev_base) = ((HalCh->FwdUnkVc<<31)|Ch);
-+
-+  /* Configure Tx Channel Mapping Register (turn channel "ON") */
-+  TX_CH_MAPPING_REG(HalDev->dev_base) = 0x80000000  | 
-+                                        (HalCh->DaMask << 30) 
-+                                        | (HalCh->Priority << 24) | Ch;
-+
-+  /* Setup Rx Channel in the LUT */
-+  i=0;
-+  while (!(RX_LUT_CH_SETUP_REQ_REG(HalDev->dev_base) & 0x80000000))
-+    {
-+    if (i > WAIT_THRESH)
-+      {
-+       return(EC_CPSAR|EC_FUNC_CHSETUP|EC_VAL_LUT_NOT_READY);
-+      }
-+    else
-+      i++;
-+    }
-+
-+  /* RX LUT is ready */
-+  RX_LUT_CH_SETUP_REQ_REG(HalDev->dev_base) = (HalCh->PktType << 24) | Ch;
-+  RX_LUT_CH_SETUP_REQ_VC_REG(HalDev->dev_base) = ((HalCh->Vpi << 20) |  
-+    (HalCh->Vci << 4));
-+
-+  return (EC_NO_ERRORS);
-+  }
-+
-+static int halChannelTeardown(CPSAR_DEVICE *HalDev, int Ch, bit32 Mode)
-+  {
-+   int waitcnt = 0;
-+   int PdspBlockOffset = 0, i;
-+   volatile bit32u *pTmp;
-+
-+#ifdef __CPHAL_DEBUG
-+  if (DBG(0))
-+    {
-+     dbgPrintf("[cpsar]halChannelTeardown(HalDev:%08x, Ch:%d, Mode:%d\n", 
-+                            (bit32u)HalDev, Ch, Mode);
-+     osfuncSioFlush();
-+    }
-+#endif
-+
-+   if ((Ch < 0) || (Ch > MAX_CHAN)) 
-+     return(EC_CPSAR|EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_CH);
-+
-+   /* Request RX channel teardown through LUT */
-+   while ((RX_LUT_CH_TEARDOWN_REQ_REG(HalDev->dev_base) & 0x80000000) == 0)
-+     {
-+      waitcnt++;
-+      if (waitcnt == WAIT_THRESH)
-+        {
-+         return(EC_CPSAR|EC_FUNC_CHTEARDOWN|EC_VAL_LUT_NOT_READY);
-+        }
-+     }
-+
-+   RX_LUT_CH_TEARDOWN_REQ_REG(HalDev->dev_base) = (Ch & 0xffff);
-+
-+   /* for AAL2, clear channel PDSP RAM here.  AAL5 does it when the teardown
-+      has completed (which is asynchronous)*/
-+   if (Ch > 15)
-+     {
-+      /* Get the offset to the AAL2 portion of the block (in words) */
-+      PdspBlockOffset = NUM_PDSP_AAL5_STATE_WORDS + ((Ch-16)*64);
-+      /* Clear PDSP State RAM */
-+      pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset);
-+      for (i=0; i<NUM_PDSP_AAL2_STATE_WORDS; i++)
-+        *pTmp++ = 0;
-+     }
-+
-+   return (EC_NO_ERRORS);
-+  }
-+
-+int InitPdsp(CPSAR_DEVICE *HalDev)
-+  {
-+   bit32u NumOfEntries,i,IRamAddress,iTmp;
-+   int *SarPdspFirmware; /* ~GSG 030403 */
-+   int FirmwareSize, rc; /* ~GSG 030403 */
-+
-+#ifdef __CPHAL_DEBUG
-+  if (DBG(0))
-+    {
-+     dbgPrintf("[cpsar]InitPdsp(HalDev:%08x)\n", (bit32u)HalDev);
-+     osfuncSioFlush();
-+    }
-+#endif
-+
-+   /* Get firmware */
-+   rc = HalDev->OsFunc->Control(HalDev->OsDev, "Firmware", "Get", &SarPdspFirmware);  /* ~GSG 030403 */
-+   if (rc)                                                  /* +GSG 030403 */
-+     return (EC_CPSAR|EC_FUNC_OPEN|EC_VAL_KEY_NOT_FOUND);   /* +GSG 030403 */
-+
-+   /* Get firmware size */
-+   rc = HalDev->OsFunc->Control(HalDev->OsDev, "FirmwareSize", "Get", &FirmwareSize); /* ~GSG 030403 */
-+   if (rc)                                                  /* +GSG 030403 */
-+     return (EC_CPSAR|EC_FUNC_OPEN|EC_VAL_KEY_NOT_FOUND);   /* +GSG 030403 */
-+
-+   IRamAddress = (bit32u) pPDSP_CTRL_REG(HalDev->dev_base);
-+ 
-+   NumOfEntries = (FirmwareSize)/4;                         /* ~GSG 030403 */
-+   if (NumOfEntries > IRAM_SIZE)
-+     {
-+       /* Note: On Avalanche, they truncated the PDSP firmware and warned */
-+       /* NumOfEntries = IRAM_SIZE; */
-+       return(EC_CPSAR|EC_FUNC_INIT|EC_VAL_FIRMWARE_TOO_LARGE);
-+     }
-+   for(i=8;i<NumOfEntries;i++)
-+     (*((bit32 *) (IRamAddress+(i*4))))=SarPdspFirmware[i]; /* ~GSG 030403 */
-+
-+      /* Check code */
-+   for(i=8;i<NumOfEntries;i++)
-+     {
-+       iTmp=(*((bit32 *) (IRamAddress+(i*4))));
-+       if (iTmp != SarPdspFirmware[i])                      /* ~GSG 030403 */
-+         {
-+           return(EC_CPSAR|EC_FUNC_OPEN|EC_VAL_PDSP_LOAD_FAIL);
-+         }
-+     }
-+      
-+   return(EC_NO_ERRORS);
-+  }
-+
-+/*
-+ *  This function probes for the instance of the CPHAL module.  It will call
-+ *  the OS function @c DeviceFindInfo() to get the information required.
-+ *  
-+ *  @param   HalDev      CPHAL module instance. (set by xxxInitModule())
-+ *
-+ *  @return  0 OK, Otherwise error.
-+ */
-+static int halProbe(CPSAR_DEVICE *HalDev)
-+  {
-+   int Ret;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpsar]halProbe(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(1))
-+     {
-+      dbgPrintf("[os]DeviceFindInfo(Inst:%d, DeviceName:%s, DeviceInfo:%08x)\n",
-+                HalDev->Inst, "sar", (bit32u)&HalDev->DeviceInfo);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* Attempt to find the device information */
-+   Ret = HalDev->OsFunc->DeviceFindInfo(HalDev->Inst, "sar", &HalDev->DeviceInfo);
-+   if (Ret)
-+     return(EC_CPSAR|EC_FUNC_PROBE|EC_VAL_DEVICE_NOT_FOUND);
-+
-+   return(EC_NO_ERRORS);    
-+  }
-+
-+#ifdef __CPHAL_DEBUG
-+static void dbgConfigDump(HAL_DEVICE *HalDev)
-+  {
-+   dbgPrintf("  [cpsar Inst %d] Config Dump:\n", HalDev->Inst);
-+   dbgPrintf("    Base    :%08x, offset   :%08d\n", 
-+             HalDev->dev_base, HalDev->offset);
-+   dbgPrintf("    ResetBit:%08d, ResetBase:%08x\n", 
-+             HalDev->ResetBit, HalDev->ResetBase);
-+   dbgPrintf("    UniNni  :%08d, debug    :%08d\n", 
-+             HalDev->ResetBit, HalDev->debug);
-+   osfuncSioFlush();
-+  }
-+#endif
-+
-+/*
-+ * Sets up HAL default configuration parameter values.
-+ */
-+static void ConfigInit(CPSAR_DEVICE *HalDev)
-+  {
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpsar]ConfigInit(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+   /* configure some defaults with tnetd7300 values */
-+   HalDev->dev_base = 0xa3000000;
-+   HalDev->offset = 0;
-+   HalDev->UniNni = CFG_UNI_NNI;
-+   HalDev->ResetBit = 9;
-+   HalDev->debug = 0;
-+   HalDev->ResetBase = 0xa8611600;
-+  }
-+
-+/*
-+ * Retrieve HAL configuration parameter values.
-+ */
-+static bit32u ConfigGet(HAL_DEVICE *HalDev)
-+  {
-+   bit32u ParmValue, error_code;
-+   char *DeviceInfo = HalDev->DeviceInfo;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpsar]ConfigGet(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* get the configuration parameters common to all modules */
-+   error_code = ConfigGetCommon(HalDev);
-+   if (error_code) return (EC_CPSAR|error_code);
-+
-+   /* get SAR specific configuration parameters */
-+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo,"UniNni",&ParmValue);
-+   if (!error_code) HalDev->UniNni = ParmValue;
-+
-+   return (EC_NO_ERRORS);
-+  }
-+
-+static int halInit(CPSAR_DEVICE *HalDev)
-+  {
-+   bit32u Ret;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpsar]halInit(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(7))
-+     {
-+      dbgPrintf("[cpsar halInit()]InitCount = %d\n", HalDev->InitCount);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* Only run the init code for the first calling module per instance */
-+   if (HalDev->InitCount > 1)
-+     {
-+      return (EC_NO_ERRORS);
-+     }
-+
-+   /* Configure HAL defaults */
-+   ConfigInit(HalDev);
-+
-+   /* Retrieve HAL configuration parameters from data store */
-+   Ret = ConfigGet(HalDev);
-+   if (Ret) return (Ret);
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(9))
-+     dbgConfigDump(HalDev);
-+#endif
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+static int halOpen(CPSAR_DEVICE *HalDev)
-+  {
-+   int Ret, Ticks=64;
-+   int i;              /*+GSG 030407*/
-+   volatile int *pTmp; /*+GSG 030407*/
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpsar]halOpen(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(7))
-+     {
-+      dbgPrintf("[cpsar halOpen()]OpenCount = %d\n", HalDev->OpenCount);      
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* Only run the open code for the first calling module per instance */
-+   if (HalDev->OpenCount++ > 0)
-+     {
-+      return (EC_NO_ERRORS);
-+     }
-+
-+   /* Take SAR out of reset */
-+   if (((*(volatile bit32u *)(HalDev->ResetBase)) & (1<<HalDev->ResetBit)) != 0)
-+     {
-+       /** @todo Should I somehow call AAL5/AAL2 Close() here? All I've done
-+           here is copy the Close code from each and paste it here. */   
-+
-+#ifdef __CPHAL_DEBUG
-+      if (DBG(7))
-+        {
-+         dbgPrintf("[cpsar halOpen()]Module was already out of reset.\n");
-+         dbgPrintf("                 Closing module and resetting.\n");
-+         osfuncSioFlush();
-+        }
-+#endif
-+
-+      /* Disable the Tx CPPI DMA */
-+      TX_CPPI_CTL_REG(HalDev->dev_base) = 0;
-+
-+      /* Disable the Rx CPPI DMA */
-+      RX_CPPI_CTL_REG(HalDev->dev_base) = 0;
-+
-+      /* Disable the PDSP */
-+      PDSP_CTRL_REG(HalDev->dev_base) &=~ 0x00000002;
-+
-+      /* disable interrupt masks */
-+      SAR_TX_MASK_CLR(HalDev->dev_base) = 0xffffffff;
-+      SAR_RX_MASK_CLR(HalDev->dev_base) = 0xffffffff;
-+
-+#ifndef NO_RESET /* GSG+ 030428 */
-+      /* clear reset bit */
-+      (*(volatile bit32u *)(HalDev->ResetBase)) &=~ (1<<HalDev->ResetBit); /* ~GSG 030307 */
-+      HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks);
-+
-+      /* set reset bit */
-+      (*(volatile bit32u *)(HalDev->ResetBase)) |= (1<<HalDev->ResetBit); /* ~GSG 030307 */
-+      HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks);
-+#endif /* GSG+ 030428 */
-+     }
-+    else
-+     {
-+      (*(volatile bit32u *)(HalDev->ResetBase)) |= (1<<HalDev->ResetBit); /* ~GSG 030307 */
-+      HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks);
-+     }
-+
-+   /* Configure UNI/NNI */
-+   RX_LUT_GLOBAL_CFG_REG(HalDev->dev_base) |= (HalDev->UniNni & 0x1);
-+
-+   /* Clear entire PDSP state RAM */                /*+GSG 030407*/
-+   pTmp = (pTX_DMA_STATE_WORD_0(HalDev->dev_base)); /*+GSG 030407*/
-+   for (i=0; i<PDSP_STATE_RAM_SIZE; i++)            /*+GSG 030407*/
-+     *pTmp++ = 0;                                   /*+GSG 030407*/
-+
-+   /* Configure Oam Mode */                         /*+GSG 030407*/
-+   SetOamMode(HalDev);                              /*+GSG 030407*/
-+
-+   /* Initialize PDSP */
-+   Ret=InitPdsp(HalDev);
-+   if(Ret)
-+     return(Ret);
-+
-+   /* Reset and Enable the PDSP */
-+   PDSP_CTRL_REG(HalDev->dev_base) = 0x00080003;
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+static int halClose(CPSAR_DEVICE *HalDev, int Mode)
-+  {
-+   int Ticks = 64;
-+
-+#ifdef __CPHAL_DEBUG
-+  if (DBG(0))
-+    {
-+     dbgPrintf("[cpsar]halClose(HalDev:%08x, Mode:%d)\n", (bit32u)HalDev, Mode);
-+     osfuncSioFlush();
-+    }
-+#endif
-+
-+   /* handle the error case if there is nothing open */
-+   if (HalDev->OpenCount == 0)
-+     {
-+      return(EC_CPSAR|EC_FUNC_CLOSE|EC_VAL_MODULE_ALREADY_CLOSED);
-+     }
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(7))
-+     {
-+      dbgPrintf("[cpsar halClose()]OpenCount = %d\n", HalDev->OpenCount);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* Only run the close code for the last calling module per instance */
-+   if (HalDev->OpenCount-- > 1)
-+     {
-+      return (EC_NO_ERRORS);
-+     }
-+
-+   /* Disable the PDSP */
-+   PDSP_CTRL_REG(HalDev->dev_base) &=~ 0x00000002;
-+
-+#ifndef NO_RESET /* GSG +030428 */
-+   /* put device back into reset */
-+   (*(volatile bit32u *)(HalDev->ResetBase)) &=~ (1<<HalDev->ResetBit); /* ~GSG 030307 */
-+   HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks);
-+#endif /* GSG +030428 */
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+static int halShutdown(CPSAR_DEVICE *HalDev)
-+  {
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpsar]halShutdown(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* handle the error case */
-+   if (HalDev->InitCount == 0)
-+     {
-+      return(EC_CPSAR|EC_FUNC_CLOSE|EC_VAL_MODULE_ALREADY_SHUTDOWN);
-+     }
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(7))
-+     {
-+      dbgPrintf("[cpsar halShutdown()]InitCount = %d\n", HalDev->InitCount);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   /* Only run the shutdown code for the last calling module per instance */
-+   if (HalDev->InitCount-- > 1)
-+     {
-+      return (EC_NO_ERRORS);
-+     }
-+
-+   /* free the SAR functions */
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(6))
-+     {
-+      dbgPrintf("  [cpsar halShutdown()]: Free CPSAR function pointers\n");
-+      osfuncSioFlush();
-+     }
-+   if (DBG(1)||DBG(3))
-+     {
-+      dbgPrintf("[os]Free(MemPtr:%08x)\n", (bit32u)HalDev->HalFuncPtr);
-+      osfuncSioFlush();
-+     }
-+#endif
-+   /* free the HalFunc */
-+   HalDev->OsFunc->Free(HalDev->HalFuncPtr);
-+
-+   /* we have a static global, so I should clear it's value as well */
-+   CpsarDev[HalDev->Inst] = 0;
-+
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(6))
-+     {
-+      dbgPrintf("  [cpsar halShutdown()]Free HalDev\n");
-+      osfuncSioFlush();
-+     }
-+   if (DBG(1)||DBG(3))
-+     {
-+      dbgPrintf("[os]Free(MemPtr:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+   /* free the CPSAR device */
-+   HalDev->OsFunc->Free(HalDev);
-+
-+   return(EC_NO_ERRORS);
-+  }
-+
-+static int halTick(CPSAR_DEVICE *HalDev)
-+  {   
-+#ifdef __CPHAL_DEBUG
-+   if (DBG(0))
-+     {
-+      dbgPrintf("[cpsar]halTick(HalDev:%08x)\n", (bit32u)HalDev);
-+      osfuncSioFlush();
-+     }
-+#endif
-+
-+   return(EC_NO_ERRORS); 
-+  }
-+
-+/*
-+ *  The CPSAR version of InitModule() should be passed the OS_FUNCTIONS pointer,
-+ *  and will return the HalDev pointer.
-+ *
-+ *  @param   HalDev  Pointer to CPSAR module information.  This will 
-+ *                   be used by the OS when communicating to this module via 
-+ *                   CPSAR. 
-+ *  @param   OsDev   Pointer to OS device information.  This will be saved by
-+ *                   the CPSAR and returned to the OS when required.
-+ *  @param   HalFunc HAL_FUNCTIONS pointer.
-+ *  @param   Size    Pointer to the size of the HAL_FUNCTIONS structure.  (If
-+ *                   HalFunc is 0, the value will be set by CPSAR, otherwise 
-+ *                   ignored)
-+ *  @param   Inst    The instance number of the module to initialize. (start at
-+ *                   0).
-+ * 
-+ *  @return  0 OK, Nonzero - error.
-+ */
-+/*
-+int cpsarInitModule(CPSAR_DEVICE **HalDev, 
-+                 OS_DEVICE *OsDev, 
-+                 CPSAR_FUNCTIONS *HalFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int *Size,
-+                 int Inst)
-+*/
-+int cpsarInitModule(CPSAR_DEVICE **HalDev, 
-+                 OS_DEVICE *OsDev, 
-+                 CPSAR_FUNCTIONS **HalFunc, 
-+                 OS_FUNCTIONS *OsFunc, 
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst)
-+  {
-+   CPSAR_DEVICE *HalPtr;
-+   CPSAR_FUNCTIONS *HalFuncPtr;
-+
-+   /*
-+   if ( HalFunc == 0 )
-+     {
-+      *Size = sizeof(CPSAR_FUNCTIONS);
-+      return(EC_NO_ERRORS);   
-+     }
-+   */
-+
-+   if (CpsarDev[Inst] != 0)
-+     {
-+      /* this SAR module has been connected to before, so do not
-+         allocate another CPSAR_DEVICE */
-+      HalPtr = CpsarDev[Inst];
-+  
-+      /* increase count of attached modules */
-+      HalPtr->InitCount++;
-+     }
-+    else
-+     {
-+      /* allocate the CPSAR_DEVICE structure */
-+      HalPtr = (CPSAR_DEVICE *) OsFunc->MallocDev(sizeof(CPSAR_DEVICE));
-+      if(!HalPtr)
-+        return(EC_CPSAR|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_DEV_FAILED);
-+
-+      HalFuncPtr = (CPSAR_FUNCTIONS *) OsFunc->Malloc(sizeof(CPSAR_FUNCTIONS));
-+      if (!HalFuncPtr)
-+        return (EC_CPSAR|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_FAILED);
-+
-+      /* Initialize the size of hal functions */
-+      *HalFuncSize = sizeof (CPSAR_FUNCTIONS);
-+
-+      /* ensure the device structure is cleared */
-+      OsFunc->Memset(HalPtr, 0, sizeof(CPSAR_DEVICE));
-+      
-+      /* clear the function pointers */
-+      OsFunc->Memset(HalFuncPtr, 0, sizeof(CPSAR_FUNCTIONS));
-+
-+      /* Supply pointers for the CPSAR API functions */
-+      HalFuncPtr->ChannelSetup    = halChannelSetup;
-+      HalFuncPtr->ChannelTeardown = halChannelTeardown;
-+      HalFuncPtr->Close           = halClose;
-+      HalFuncPtr->Control         = halControl;
-+      HalFuncPtr->Init            = halInit;
-+      HalFuncPtr->Open            = halOpen;
-+      HalFuncPtr->Probe           = halProbe;
-+      HalFuncPtr->Shutdown        = halShutdown;
-+      HalFuncPtr->Tick            = halTick;
-+
-+      /* keep a reference to HalFuncPtr so I can free it later */
-+      HalPtr->HalFuncPtr = HalFuncPtr;
-+
-+      /* store the CPSAR_DEVICE, so the CPSAR module will know whether
-+         it is in use for the given instance */
-+      CpsarDev[Inst] = HalPtr;
-+     
-+      /* increase count of attached modules */
-+      HalPtr->InitCount++;
-+     }
-+
-+   /* @todo Does this need modification to deal with multiple callers/
-+      drivers?  If different callers will use different OsDev/OsFunc,
-+      then the current code will not work.
-+   */
-+
-+   /* initialize the CPSAR_DEVICE structure */
-+   HalPtr->OsDev  = OsDev;
-+   /*HalPtr->OsOpen = OsDev;*/
-+   HalPtr->Inst   = Inst;
-+   HalPtr->OsFunc = OsFunc;
-+
-+   /* pass the HalPtr back to the caller */
-+   *HalDev = HalPtr;
-+   *HalFunc = HalPtr->HalFuncPtr;
-+
-+   return (EC_NO_ERRORS);
-+  }
-diff -urN linux.old/drivers/atm/sangam_atm/cpsar_cpaal5.h linux.dev/drivers/atm/sangam_atm/cpsar_cpaal5.h
---- linux.old/drivers/atm/sangam_atm/cpsar_cpaal5.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpsar_cpaal5.h	2005-08-23 04:46:50.087845216 +0200
-@@ -0,0 +1,103 @@
-+/*******************************************************************************
-+ *  TNETDxxxx Software Support
-+ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  FILE:   cpsar.h
-+ *
-+ *  DESCRIPTION:
-+ *      This file contains data structure definitions for the CPSAR HAL.
-+ *
-+ *  HISTORY:
-+ *      6Sep02 Greg        1.00  Original Version created. 
-+ *
-+ *****************************************************************************/
-+#ifndef _INC_CPSAR
-+#define _INC_CPSAR
-+
-+#define NUM_RX_STATE_WORDS    7
-+#define NUM_TX_STATE_WORDS    9
-+#define MAX_CHAN        19
-+
-+
-+#ifndef _CPHAL_CPSAR
-+typedef void CPSAR_DEVICE;
-+#endif
-+
-+/* 
-+ * HAL Default Parameter Values
-+ */
-+#define  CFG_UNI_NNI  0
-+
-+/**
-+ *  @ingroup shared_data
-+ * 
-+ *  List of defined keys for use with Control().
-+ */
-+typedef enum 
-+  {
-+   /* SAR */
-+   enGET_FIRMWARE,        /**< Used by the SAR to request a pointer to firmware */
-+   enGET_FIRMWARE_SIZE,   /**< Used by the SAR to request the size of the firmware */
-+   enEND=9999 /* Last entry */
-+  }INFO_KEY;
-+
-+/*
-+ *  The CPHAL_FUNCTIONS struct defines the CPHAL function pointers used by upper layer 
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to cphalInitModule().
-+ */
-+typedef struct
-+  {
-+  int  (*ChannelSetup)(CPSAR_DEVICE *HalDev, CHANNEL_INFO *HalCh);
-+  int  (*ChannelTeardown)(CPSAR_DEVICE *HalDev, int Ch, int Mode);
-+  int  (*Close)(CPSAR_DEVICE *HalDev, int Mode);
-+  int  (*Control)(CPSAR_DEVICE *HalDev, const char *Key, const char *Action, void *Value); 
-+  int  (*Init)(CPSAR_DEVICE *HalDev);
-+  int  (*ModeChange)(CPSAR_DEVICE *HalDev, char *DeviceParms);
-+  int  (*Open)(CPSAR_DEVICE *HalDev);
-+  int  (*Probe)(CPSAR_DEVICE *HalDev);
-+  int  (*Shutdown)(CPSAR_DEVICE *HalDev);
-+  int  (*Tick)(CPSAR_DEVICE *HalDev);
-+  } CPSAR_FUNCTIONS;
-+
-+/*
-+ *  This is the data structure for a generic HAL device.  It contains all device
-+ *  specific data for a single instance of that device.  This includes Rx/Tx 
-+ *  buffer queues, device base address, reset bit, and other information.
-+ */
-+typedef struct cpsar_device
-+  {    
-+   bit32  dev_base;
-+   bit32  offset;
-+   bit32  TxTeardownPending[MAX_CHAN];
-+   bit32  RxTeardownPending[MAX_CHAN];
-+   bit32  ChIsOpen[MAX_CHAN];
-+   bit32  ResetBit;
-+   bit32  debug;
-+   OS_DEVICE *OsDev;
-+   OS_FUNCTIONS *OsFunc;
-+    /*void   *OsOpen;*/
-+   bit32  UniNni;
-+   bit32  Inst;
-+   bit32u DeviceCPID[4];
-+   bit32u LBSourceLLID[4];
-+   bit32u OamRate[11];
-+   CHANNEL_INFO ChData[MAX_CHAN];
-+   int    InitCount;
-+   int    OpenCount;
-+   char   *DeviceInfo;
-+   bit32u ResetBase;
-+   DEVICE_STATE State;
-+   CPSAR_FUNCTIONS *HalFuncPtr;
-+   int    OamMode; /* +GSG 030407 */
-+  }CPSARDEVICE;
-+
-+extern int cpsarInitModule(CPSAR_DEVICE **HalDev, 
-+                 OS_DEVICE *OsDev, 
-+                 CPSAR_FUNCTIONS **HalFunc, 
-+                 OS_FUNCTIONS *OsFunc, 
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/cpsar.h linux.dev/drivers/atm/sangam_atm/cpsar.h
---- linux.old/drivers/atm/sangam_atm/cpsar.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpsar.h	2005-08-23 04:46:50.087845216 +0200
-@@ -0,0 +1,103 @@
-+/*******************************************************************************
-+ *  TNETDxxxx Software Support
-+ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  FILE:   cpsar.h
-+ *
-+ *  DESCRIPTION:
-+ *      This file contains data structure definitions for the CPSAR HAL.
-+ *
-+ *  HISTORY:
-+ *      6Sep02 Greg        1.00  Original Version created. 
-+ *
-+ *****************************************************************************/
-+#ifndef _INC_CPSAR
-+#define _INC_CPSAR
-+
-+#define NUM_RX_STATE_WORDS    7
-+#define NUM_TX_STATE_WORDS    9
-+#define MAX_CHAN        19
-+
-+
-+#ifndef _CPHAL_CPSAR
-+typedef void CPSAR_DEVICE;
-+#endif
-+
-+/* 
-+ * HAL Default Parameter Values
-+ */
-+#define  CFG_UNI_NNI  0
-+
-+/**
-+ *  @ingroup shared_data
-+ * 
-+ *  List of defined keys for use with Control().
-+ */
-+typedef enum 
-+  {
-+   /* SAR */
-+   enGET_FIRMWARE,        /**< Used by the SAR to request a pointer to firmware */
-+   enGET_FIRMWARE_SIZE,   /**< Used by the SAR to request the size of the firmware */
-+   enEND=9999 /* Last entry */
-+  }INFO_KEY;
-+
-+/*
-+ *  The CPHAL_FUNCTIONS struct defines the CPHAL function pointers used by upper layer 
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to cphalInitModule().
-+ */
-+typedef struct
-+  {
-+  int  (*ChannelSetup)(CPSAR_DEVICE *HalDev, CHANNEL_INFO *HalCh);
-+  int  (*ChannelTeardown)(CPSAR_DEVICE *HalDev, int Ch, int Mode);
-+  int  (*Close)(CPSAR_DEVICE *HalDev, int Mode);
-+  int  (*Control)(CPSAR_DEVICE *HalDev, const char *Key, const char *Action, void *Value); 
-+  int  (*Init)(CPSAR_DEVICE *HalDev);
-+  int  (*ModeChange)(CPSAR_DEVICE *HalDev, char *DeviceParms);
-+  int  (*Open)(CPSAR_DEVICE *HalDev);
-+  int  (*Probe)(CPSAR_DEVICE *HalDev);
-+  int  (*Shutdown)(CPSAR_DEVICE *HalDev);
-+  int  (*Tick)(CPSAR_DEVICE *HalDev);
-+  } CPSAR_FUNCTIONS;
-+
-+/*
-+ *  This is the data structure for a generic HAL device.  It contains all device
-+ *  specific data for a single instance of that device.  This includes Rx/Tx 
-+ *  buffer queues, device base address, reset bit, and other information.
-+ */
-+typedef struct cpsar_device
-+  {    
-+   bit32  dev_base;
-+   bit32  offset;
-+   bit32  TxTeardownPending[MAX_CHAN];
-+   bit32  RxTeardownPending[MAX_CHAN];
-+   bit32  ChIsOpen[MAX_CHAN];
-+   bit32  ResetBit;
-+   bit32  debug;
-+   OS_DEVICE *OsDev;
-+   OS_FUNCTIONS *OsFunc;
-+    /*void   *OsOpen;*/
-+   bit32  UniNni;
-+   bit32  Inst;
-+   bit32u DeviceCPID[4];
-+   bit32u LBSourceLLID[4];
-+   bit32u OamRate[11];
-+   CHANNEL_INFO ChData[MAX_CHAN];
-+   int    InitCount;
-+   int    OpenCount;
-+   char   *DeviceInfo;
-+   bit32u ResetBase;
-+   DEVICE_STATE State;
-+   CPSAR_FUNCTIONS *HalFuncPtr;
-+   int    OamMode; /* +GSG 030407 */
-+  }CPSARDEVICE;
-+
-+extern int cpsarInitModule(CPSAR_DEVICE **HalDev, 
-+                 OS_DEVICE *OsDev, 
-+                 CPSAR_FUNCTIONS **HalFunc, 
-+                 OS_FUNCTIONS *OsFunc, 
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/cp_sar_reg.h linux.dev/drivers/atm/sangam_atm/cp_sar_reg.h
---- linux.old/drivers/atm/sangam_atm/cp_sar_reg.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cp_sar_reg.h	2005-08-23 04:46:50.087845216 +0200
-@@ -0,0 +1,217 @@
-+/***************************************************************************
-+        TNETD73xx Software Support
-+        Copyright(c) 2000, Texas Instruments Incorporated. All Rights Reserved.
-+
-+        FILE: cp_sar_reg.h   Register definitions for the SAR module
-+
-+        DESCRIPTION:
-+                This include file contains register definitions for the
-+                SAR module.
-+
-+        HISTORY:
-+                15 Jan 02    G. Guyotte   Original version written
-+                03 Oct 02    G. Guyotte   C++ style comments removed
-+****************************************************************************/
-+#ifndef _INC_SAR_REG
-+#define _INC_SAR_REG
-+
-+/* Global Registers */
-+#define pSAR_ID_REG(base)                   ((volatile bit32u *)(base+0x0000))
-+#define SAR_ID_REG(base)                    (*pSAR_ID_REG(base))
-+#define pSAR_STATUS_SET_REG(base)           ((volatile bit32u *)(base+0x0008))
-+#define SAR_STATUS_SET_REG(base)            (*pSAR_STATUS_SET_REG(base))
-+#define pSAR_STATUS_CLR_REG(base)           ((volatile bit32u *)(base+0x000C))
-+#define SAR_STATUS_CLR_REG(base)            (*pSAR_STATUS_CLR_REG(base))
-+#define pSAR_HOST_INT_EN_SET_REG(base)      ((volatile bit32u *)(base+0x0010))
-+#define SAR_HOST_INT_EN_SET_REG(base)       (*pSAR_HOST_INT_EN_SET_REG(base))
-+#define pSAR_HOST_INT_EN_CLR_REG(base)      ((volatile bit32u *)(base+0x0014))
-+#define SAR_HOST_INT_EN_CLR_REG(base)       (*pSAR_HOST_INT_EN_CLR_REG(base))
-+#define pSAR_PDSP_INT_EN_SET_REG(base)      ((volatile bit32u *)(base+0x0018))
-+#define SAR_PDSP_INT_EN_SET_REG(base)       (*pSAR_PDSP_INT_EN_SET_REG(base))
-+#define pSAR_PDSP_INT_EN_CLR_REG(base)      ((volatile bit32u *)(base+0x001C))
-+#define SAR_PDSP_INT_EN_CLR_REG(base)       (*pSAR_PDSP_INT_EN_CLR_REG(base))
-+
-+/* PDSP OAM General Purpose Registers */
-+#define pSAR_PDSP_HOST_OAM_CONFIG_REG(base) ((volatile bit32u *)(base+0x0020))
-+#define SAR_PDSP_HOST_OAM_CONFIG_REG(base)  (*pSAR_PDSP_HOST_OAM_CONFIG_REG(base))
-+#define pSAR_PDSP_OAM_CORR_REG(base)        ((volatile bit32u *)(base+0x0024))
-+#define SAR_PDSP_OAM_CORR_REG(base)         (*pSAR_PDSP_OAM_CORR_REG(base))
-+#define pSAR_PDSP_OAM_LB_RESULT_REG(base)   ((volatile bit32u *)(base+0x0028))
-+#define SAR_PDSP_OAM_LB_RESULT_REG(base)    (*pSAR_PDSP_OAM_LB_RESULT_REG(base))
-+#define pSAR_PDSP_OAM_F5_LB_COUNT_REG(base) ((volatile bit32u *)(base+0x002c))     /* +GSG 030416 */
-+#define SAR_PDSP_OAM_F5_LB_COUNT_REG(base)  (*pSAR_PDSP_OAM_F5_LB_COUNT_REG(base)) /* +GSG 030416 */
-+#define pSAR_PDSP_OAM_F4_LB_COUNT_REG(base) ((volatile bit32u *)(base+0x0030))     /* +GSG 030416 */
-+#define SAR_PDSP_OAM_F4_LB_COUNT_REG(base)  (*pSAR_PDSP_OAM_F4_LB_COUNT_REG(base)) /* +GSG 030416 */
-+#define pSAR_PDSP_FWD_UNK_VC_REG(base)      ((volatile bit32u *)(base+0x0034))     /* +GSG 030701 */
-+#define SAR_PDSP_FWD_UNK_VC_REG(base)       (*pSAR_PDSP_FWD_UNK_VC_REG(base))      /* +GSG 030701 */
-+
-+
-+/* Rx Lookup Table Registers */
-+#define pRX_LUT_GLOBAL_CFG_REG(base)        ((volatile bit32u *)(base+0x0080))
-+#define RX_LUT_GLOBAL_CFG_REG(base)         (*pRX_LUT_GLOBAL_CFG_REG(base))
-+#define pRX_LUT_CH_SETUP_REQ_REG(base)      ((volatile bit32u *)(base+0x0090))
-+#define RX_LUT_CH_SETUP_REQ_REG(base)       (*pRX_LUT_CH_SETUP_REQ_REG(base))
-+#define pRX_LUT_CH_SETUP_REQ_VC_REG(base)   ((volatile bit32u *)(base+0x0094))
-+#define RX_LUT_CH_SETUP_REQ_VC_REG(base)    (*pRX_LUT_CH_SETUP_REQ_VC_REG(base))
-+#define pRX_LUT_CH_TEARDOWN_REQ_REG(base)   ((volatile bit32u *)(base+0x009C))
-+#define RX_LUT_CH_TEARDOWN_REQ_REG(base)    (*pRX_LUT_CH_TEARDOWN_REQ_REG(base))
-+
-+/* Tx Scheduler Registers */
-+#define pTX_CH_MAPPING_REG(base)            ((volatile bit32u *)(base+0x0170))
-+#define TX_CH_MAPPING_REG(base)             (*pTX_CH_MAPPING_REG(base))
-+
-+/* Tx CPPI DMA Controller Registers */
-+#define pTX_CPPI_CTL_REG(base)              ((volatile bit32u *)(base+0x0700))
-+#define TX_CPPI_CTL_REG(base)               (*pTX_CPPI_CTL_REG(base))
-+#define pTX_CPPI_TEARDOWN_REG(base)         ((volatile bit32u *)(base+0x0704))
-+#define TX_CPPI_TEARDOWN_REG(base)          (*pTX_CPPI_TEARDOWN_REG(base))
-+
-+/* EOI Interrupt Additions */
-+#define pSAR_EOI(base)                      ((volatile bit32u *)(base+0x0708))
-+#define SAR_EOI(base)                       (*pSAR_EOI(base))
-+#define pSAR_INTR_VECTOR(base)              ((volatile bit32u *)(base+0x070c))
-+#define SAR_INTR_VECTOR(base)               (*pSAR_INTR_VECTOR(base))
-+#define pSAR_TX_MASKED_STATUS(base)         ((volatile bit32u *)(base+0x0710))
-+#define SAR_TX_MASKED_STATUS(base)          (*pSAR_TX_MASKED_STATUS(base))
-+#define pSAR_TX_RAW_STATUS(base)            ((volatile bit32u *)(base+0x0714))
-+#define SAR_TX_RAW_STATUS(base)             (*pSAR_TX_RAW_STATUS(base))
-+#define pSAR_TX_MASK_SET(base)              ((volatile bit32u *)(base+0x0718))
-+#define SAR_TX_MASK_SET(base)               (*pSAR_TX_MASK_SET(base))
-+#define pSAR_TX_MASK_CLR(base)              ((volatile bit32u *)(base+0x071c))
-+#define SAR_TX_MASK_CLR(base)               (*pSAR_TX_MASK_CLR(base))
-+
-+/* Rx CPPI DMA Controller Registers */
-+#define pRX_CPPI_CTL_REG(base)              ((volatile bit32u *)(base+0x0780))
-+#define RX_CPPI_CTL_REG(base)               (*pRX_CPPI_CTL_REG(base))
-+#define pSAR_RX_MASKED_STATUS(base)         ((volatile bit32u *)(base+0x0790))
-+#define SAR_RX_MASKED_STATUS(base)          (*pSAR_RX_MASKED_STATUS(base))
-+#define pSAR_RX_RAW_STATUS(base)            ((volatile bit32u *)(base+0x0794))
-+#define SAR_RX_RAW_STATUS(base)             (*pSAR_RX_RAW_STATUS(base))
-+#define pSAR_RX_MASK_SET(base)              ((volatile bit32u *)(base+0x0798))
-+#define SAR_RX_MASK_SET(base)               (*pSAR_RX_MASK_SET(base))
-+#define pSAR_RX_MASK_CLR(base)              ((volatile bit32u *)(base+0x079c))
-+#define SAR_RX_MASK_CLR(base)               (*pSAR_RX_MASK_CLR(base))
-+
-+/* PDSP Control/Status Registers */
-+#define pPDSP_CTRL_REG(base)                ((volatile bit32u *)(base+0x4000))
-+#define PDSP_CTRL_REG(base)                 (*pPDSP_CTRL_REG(base))
-+
-+/* PDSP Instruction RAM */
-+#define pPDSP_IRAM(base)                    ((volatile bit32u *)(base+0x4020))
-+#define PDSP_IRAM(base)                     (*pPDSP_IRAM(base))
-+
-+/*
-+ * Channel 0 State/Scratchpad RAM Block
-+ * 
-+ * The following registers (Tx DMA State, Rx DMA State, CPPI Completion PTR, 
-+ * and PDSP Data) have been given the correct address for channel 0.  To
-+ * reach the registers for channel X, add (X * 0x100) to the pointer address.
-+ *
-+ */
-+
-+#define PDSP_STATE_RAM_SIZE   1024
-+
-+/* Tx DMA State RAM */
-+#define pTX_DMA_STATE_WORD_0(base)          ((volatile bit32u *)(base+0x8000))
-+#define TX_DMA_STATE_WORD_0(base)           (*pTX_DMA_STATE_WORD_0(base))
-+#define pTX_DMA_STATE_WORD_1(base)          ((volatile bit32u *)(base+0x8004))
-+#define TX_DMA_STATE_WORD_1(base)           (*pTX_DMA_STATE_WORD_1(base))
-+#define pTX_DMA_STATE_WORD_2(base)          ((volatile bit32u *)(base+0x8008))
-+#define TX_DMA_STATE_WORD_2(base)           (*pTX_DMA_STATE_WORD_2(base))
-+#define pTX_DMA_STATE_WORD_3(base)          ((volatile bit32u *)(base+0x800C))
-+#define TX_DMA_STATE_WORD_3(base)           (*pTX_DMA_STATE_WORD_3(base))
-+#define pTX_DMA_STATE_WORD_4(base)          ((volatile bit32u *)(base+0x8010))
-+#define TX_DMA_STATE_WORD_4(base)           (*pTX_DMA_STATE_WORD_4(base))
-+#define pTX_DMA_STATE_WORD_5(base)          ((volatile bit32u *)(base+0x8014))
-+#define TX_DMA_STATE_WORD_5(base)           (*pTX_DMA_STATE_WORD_5(base))
-+#define pTX_DMA_STATE_WORD_6(base)          ((volatile bit32u *)(base+0x8018))
-+#define TX_DMA_STATE_WORD_6(base)           (*pTX_DMA_STATE_WORD_6(base))
-+#define pTX_DMA_STATE_WORD_7(base)          ((volatile bit32u *)(base+0x801C))
-+#define TX_DMA_STATE_WORD_7(base)           (*pTX_DMA_STATE_WORD_7(base))
-+#define pTX_DMA_STATE_WORD_8(base)          ((volatile bit32u *)(base+0x8020))
-+#define TX_DMA_STATE_WORD_8(base)           (*pTX_DMA_STATE_WORD_8(base))
-+
-+/* Rx DMA State RAM */
-+#define pRX_DMA_STATE_WORD_0(base)          ((volatile bit32u *)(base+0x8024))
-+#define RX_DMA_STATE_WORD_0(base)           (*pRX_DMA_STATE_WORD_0(base))
-+#define pRX_DMA_STATE_WORD_1(base)          ((volatile bit32u *)(base+0x8028))
-+#define RX_DMA_STATE_WORD_1(base)           (*pRX_DMA_STATE_WORD_1(base))
-+#define pRX_DMA_STATE_WORD_2(base)          ((volatile bit32u *)(base+0x802C))
-+#define RX_DMA_STATE_WORD_2(base)           (*pRX_DMA_STATE_WORD_2(base))
-+#define pRX_DMA_STATE_WORD_3(base)          ((volatile bit32u *)(base+0x8030))
-+#define RX_DMA_STATE_WORD_3(base)           (*pRX_DMA_STATE_WORD_3(base))
-+#define pRX_DMA_STATE_WORD_4(base)          ((volatile bit32u *)(base+0x8034))
-+#define RX_DMA_STATE_WORD_4(base)           (*pRX_DMA_STATE_WORD_4(base))
-+#define pRX_DMA_STATE_WORD_5(base)          ((volatile bit32u *)(base+0x8038))
-+#define RX_DMA_STATE_WORD_5(base)           (*pRX_DMA_STATE_WORD_5(base))
-+#define pRX_DMA_STATE_WORD_6(base)          ((volatile bit32u *)(base+0x803C))
-+#define RX_DMA_STATE_WORD_6(base)           (*pRX_DMA_STATE_WORD_6(base))
-+
-+/* Tx CPPI Completion Pointers */
-+#define pTXH_CPPI_COMP_PTR(base)            ((volatile bit32u *)(base+0x8040))
-+#define TXH_CPPI_COMP_PTR(base)             (*pTXH_CPPI_COMP_PTR(base))
-+#define pTXL_CPPI_COMP_PTR(base)            ((volatile bit32u *)(base+0x8044))
-+#define TXL_CPPI_COMP_PTR(base)             (*pTXL_CPPI_COMP_PTR(base))
-+
-+/* Rx CPPI Completion Pointer */
-+#define pRX_CPPI_COMP_PTR(base)             ((volatile bit32u *)(base+0x8048))
-+#define RX_CPPI_COMP_PTR(base)              (*pRX_CPPI_COMP_PTR(base))
-+
-+/* Tx PDSP Defines */
-+#define NUM_PDSP_AAL5_STATE_WORDS           24
-+#define NUM_PDSP_AAL2_STATE_WORDS           20
-+
-+/* PDSP State RAM Block 0 */
-+#define pPDSP_BLOCK_0(base)                 ((volatile bit32u *)(base+0x8050))
-+#define PDSP_BLOCK_0(base)                  (*pPDSP_BLOCK_0(base))
-+
-+/* AAL5 Tx PDSP State RAM */
-+#define pPDSP_AAL5_TX_STATE_WORD_0(base)    ((volatile bit32u *)(base+0x8050))
-+#define PDSP_AAL5_TX_STATE_WORD_0(base)     (*pPDSP_AAL5_TX_STATE_WORD_0(base))
-+
-+/* AAL5 Rx PDSP State RAM */
-+#define pPDSP_AAL5_RX_STATE_WORD_0(base)    ((volatile bit32u *)(base+0x8070))
-+#define PDSP_AAL5_RX_STATE_WORD_0(base)     (*pPDSP_AAL5_RX_STATE_WORD_0(base))
-+
-+/* AAL5 Tx VP PDSP State RAM */
-+#define pPDSP_AAL5_TX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x8090))
-+#define PDSP_AAL5_TX_VP_STATE_WORD_0(base)  (*pPDSP_AAL5_TX_VP_STATE_WORD_0(base))
-+
-+/* AAL5 Rx VP PDSP State RAM */
-+#define pPDSP_AAL5_RX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80A0))
-+#define PDSP_AAL5_RX_VP_STATE_WORD_0(base)  (*pPDSP_AAL5_RX_VP_STATE_WORD_0(base))
-+
-+/* AAL2 Tx PDSP State RAM */
-+#define pPDSP_AAL2_TX_STATE_WORD_0(base)    ((volatile bit32u *)(base+0x80B0))
-+#define PDSP_AAL2_TX_STATE_WORD_0(base)     (*pPDSP_AAL2_TX_STATE_WORD_0(base))
-+
-+/* AAL2 Rx PDSP State RAM */
-+#define pPDSP_AAL2_RX_STATE_WORD_0(base)    ((volatile bit32u *)(base+0x80D0))
-+#define PDSP_AAL2_RX_STATE_WORD_0(base)     (*pPDSP_AAL2_RX_STATE_WORD_0(base))
-+
-+/* AAL2 Tx VP PDSP State RAM */
-+#define pPDSP_AAL2_TX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80E0))
-+#define PDSP_AAL2_TX_VP_STATE_WORD_0(base)  (*pPDSP_AAL2_TX_VP_STATE_WORD_0(base))
-+
-+/* AAL2 Rx VP PDSP State RAM */
-+#define pPDSP_AAL2_RX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80F0))
-+#define PDSP_AAL2_RX_VP_STATE_WORD_0(base)  (*pPDSP_AAL2_RX_VP_STATE_WORD_0(base))
-+
-+/* PDSP OAM Configuration Block */
-+#define pOAM_CONFIG_BLOCK_WORD_0(base)      ((volatile bit32u *)(base+0x83C0))
-+#define OAM_CONFIG_BLOCK_WORD_0(base)       (*pOAM_CONFIG_BLOCK_WORD_0(base))
-+
-+/* PDSP OAM Padding Block */
-+#define pOAM_PADDING_BLOCK_WORD_0(base)     ((volatile bit32u *)(base+0x84C0))
-+#define OAM_PADDING_BLOCK_WORD_0(base)      (*pOAM_PADDING_BLOCK_WORD_0(base))
-+
-+#define NUM_OAM_RATES 11
-+
-+/* PDSP OAM Timer State RAM */
-+#define pOAM_TIMER_STATE_WORD_0(base)       ((volatile bit32u *)(base+0x85B0))
-+#define OAM_TIMER_STATE_WORD_0(base)        (*pOAM_TIMER_STATE_WORD_0(base))
-+
-+
-+/* END OF FILE */
-+
-+#endif _INC_SAR_REG
-diff -urN linux.old/drivers/atm/sangam_atm/cpswhal_cpaal5.h linux.dev/drivers/atm/sangam_atm/cpswhal_cpaal5.h
---- linux.old/drivers/atm/sangam_atm/cpswhal_cpaal5.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpswhal_cpaal5.h	2005-08-23 04:46:50.088845064 +0200
-@@ -0,0 +1,629 @@
-+/************************************************************************
-+ *  TNETDxxxx Software Support
-+ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  FILE: cphal.h
-+ *
-+ *  DESCRIPTION:
-+ *      User include file, contains data definitions shared between the CPHAL
-+ *      and the upper-layer software.
-+ *
-+ *  HISTORY:
-+ *      Date      Modifier  Ver    Notes
-+ *      28Feb02   Greg      1.00   Original
-+ *      06Mar02   Greg      1.01   Documentation enhanced
-+ *      18Jul02   Greg      1.02   Many updates (OAM additions, general reorg)
-+ *      22Nov02   Mick      RC2    Additions from Denis' input on Control
-+ *
-+ *  author  Greg Guyotte
-+ *  version 1.02
-+ *  date    18-Jul-2002
-+ *****************************************************************************/
-+#ifndef _INC_CPHAL_H
-+#define _INC_CPHAL_H
-+
-+#ifdef _CPHAL_CPMAC
-+#include "ec_errors_cpmac.h"
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+#include "ec_errors_cpaal5.h"
-+#endif
-+
-+#ifdef _CPHAL_CPSAR
-+#include "ec_errors_cpsar.h"
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+#include "ec_errors_cpaal2.h"
-+#endif
-+
-+#ifndef __ADAM2
-+typedef char           bit8;
-+typedef short          bit16;
-+typedef int            bit32;
-+
-+typedef unsigned char  bit8u;
-+typedef unsigned short bit16u;
-+typedef unsigned int   bit32u;
-+
-+/*
-+typedef char           INT8;
-+typedef short          INT16;
-+typedef int            INT32;
-+typedef unsigned char  UINT8;
-+typedef unsigned short UINT16;
-+typedef unsigned int   UINT32;
-+*/
-+/*typedef unsigned int   size_t;*/
-+#endif
-+
-+#ifdef _CPHAL
-+
-+#ifndef TRUE
-+#define TRUE (1==1)
-+#endif
-+
-+#ifndef FALSE
-+#define FALSE (1==2)
-+#endif
-+
-+#ifndef NULL
-+#define NULL 0
-+#endif
-+
-+#endif
-+
-+#define        VirtToPhys(a)                 (((int)a)&~0xe0000000)
-+#define        VirtToVirtNoCache(a)          ((void*)((VirtToPhys(a))|0xa0000000))
-+#define        VirtToVirtCache(a)            ((void*)((VirtToPhys(a))|0x80000000))
-+#define        PhysToVirtNoCache(a)          ((void*)(((int)a)|0xa0000000))
-+#define        PhysToVirtCache(a)            ((void*)(((int)a)|0x80000000))
-+/*
-+#define        DataCacheHitInvalidate(a)     {__asm__(" cache  17, (%0)" :   : "r" (a));}
-+#define        DataCacheHitWriteback(a)      {__asm__(" cache  25, (%0)" :   : "r" (a));}
-+*/
-+
-+#define PARTIAL 1     /**< Used in @c Close() and @c ChannelTeardown() */
-+#define FULL 2        /**< Used in @c Close() and @c ChannelTeardown() */
-+
-+/* Channel Teardown Defines */
-+#define RX_TEARDOWN 2
-+#define TX_TEARDOWN 1
-+#define BLOCKING_TEARDOWN 8
-+#define FULL_TEARDOWN 4
-+#define PARTIAL_TEARDOWN 0
-+
-+#define MAX_DIR 2
-+#define DIRECTION_TX 0
-+#define DIRECTION_RX 1
-+#define TX_CH 0
-+#define RX_CH 1
-+#define HAL_ERROR_DEVICE_NOT_FOUND    1
-+#define HAL_ERROR_FAILED_MALLOC       2
-+#define HAL_ERROR_OSFUNC_SIZE         3
-+#define HAL_DEFAULT  0xFFFFFFFF
-+#define VALID(val)    (val!=HAL_DEFAULT)
-+
-+/*
-+ERROR REPORTING
-+
-+HAL Module Codes.  Each HAL module reporting an error code
-+should OR the error code with the respective Module error code
-+from the list below.
-+*/
-+#define EC_AAL5                                EC_HAL|EC_DEV_AAL5
-+#define EC_AAL2                                EC_HAL|EC_DEV_AAL2
-+#define EC_CPSAR                               EC_HAL|EC_DEV_CPSAR
-+#define EC_CPMAC                               EC_HAL|EC_DEV_CPMAC
-+#define EC_VDMA                                EC_HAL|EC_DEV_VDMA
-+#define EC_VLYNQ                               EC_HAL|EC_DEV_VLYNQ
-+#define EC_CPPI                                EC_HAL|EC_DEV_CPPI
-+
-+/*
-+HAL Function Codes.  Each HAL module reporting an error code
-+should OR the error code with one of the function codes from
-+the list below.
-+*/
-+#define EC_FUNC_HAL_INIT                       EC_FUNC(1)
-+#define EC_FUNC_CHSETUP                        EC_FUNC(2)
-+#define EC_FUNC_CHTEARDOWN                     EC_FUNC(3)
-+#define EC_FUNC_RXRETURN                       EC_FUNC(4)
-+#define EC_FUNC_SEND                           EC_FUNC(5)
-+#define EC_FUNC_RXINT                          EC_FUNC(6)
-+#define EC_FUNC_TXINT                          EC_FUNC(7)
-+#define EC_FUNC_AAL2_VDMA                      EC_FUNC(8)
-+#define EC_FUNC_OPTIONS                        EC_FUNC(9)
-+#define EC_FUNC_PROBE                          EC_FUNC(10)
-+#define EC_FUNC_OPEN                           EC_FUNC(11)
-+#define EC_FUNC_CONTROL                        EC_FUNC(12)
-+#define EC_FUNC_DEVICE_INT                     EC_FUNC(13)
-+#define EC_FUNC_STATUS                         EC_FUNC(14)
-+#define EC_FUNC_TICK                           EC_FUNC(15)
-+#define EC_FUNC_CLOSE                          EC_FUNC(16)
-+#define EC_FUNC_SHUTDOWN                       EC_FUNC(17)
-+#define EC_FUNC_DEVICE_INT_ALT                 EC_FUNC(18) /* +GSG 030306 */
-+
-+/*
-+HAL Error Codes.  The list below defines every type of error
-+used in all HAL modules. DO NOT CHANGE THESE VALUES!  Add new
-+values in integer order to the bottom of the list.
-+*/
-+#define EC_VAL_PDSP_LOAD_FAIL                 EC_ERR(0x01)|EC_CRITICAL
-+#define EC_VAL_FIRMWARE_TOO_LARGE             EC_ERR(0x02)|EC_CRITICAL
-+#define EC_VAL_DEVICE_NOT_FOUND               EC_ERR(0x03)|EC_CRITICAL
-+#define EC_VAL_BASE_ADDR_NOT_FOUND            EC_ERR(0x04)|EC_CRITICAL
-+#define EC_VAL_RESET_BIT_NOT_FOUND            EC_ERR(0x05)|EC_CRITICAL
-+#define EC_VAL_CH_INFO_NOT_FOUND              EC_ERR(0x06)
-+#define EC_VAL_RX_STATE_RAM_NOT_CLEARED       EC_ERR(0x07)|EC_CRITICAL
-+#define EC_VAL_TX_STATE_RAM_NOT_CLEARED       EC_ERR(0x08)|EC_CRITICAL
-+#define EC_VAL_MALLOC_DEV_FAILED              EC_ERR(0x09)
-+#define EC_VAL_OS_VERSION_NOT_SUPPORTED       EC_ERR(0x0A)|EC_CRITICAL
-+#define EC_VAL_CPSAR_VERSION_NOT_SUPPORTED    EC_ERR(0x0B)|EC_CRITICAL
-+#define EC_VAL_NULL_CPSAR_DEV                 EC_ERR(0x0C)|EC_CRITICAL
-+
-+#define EC_VAL_LUT_NOT_READY                  EC_ERR(0x0D)
-+#define EC_VAL_INVALID_CH                     EC_ERR(0x0E)
-+#define EC_VAL_NULL_CH_STRUCT                 EC_ERR(0x0F)
-+#define EC_VAL_RX_TEARDOWN_ALREADY_PEND       EC_ERR(0x10)
-+#define EC_VAL_TX_TEARDOWN_ALREADY_PEND       EC_ERR(0x11)
-+#define EC_VAL_RX_CH_ALREADY_TORNDOWN         EC_ERR(0x12)
-+#define EC_VAL_TX_CH_ALREADY_TORNDOWN         EC_ERR(0x13)
-+#define EC_VAL_TX_TEARDOWN_TIMEOUT            EC_ERR(0x14)
-+#define EC_VAL_RX_TEARDOWN_TIMEOUT            EC_ERR(0x15)
-+#define EC_VAL_CH_ALREADY_TORNDOWN            EC_ERR(0x16)
-+#define EC_VAL_VC_SETUP_NOT_READY             EC_ERR(0x17)
-+#define EC_VAL_VC_TEARDOWN_NOT_READY          EC_ERR(0x18)
-+#define EC_VAL_INVALID_VC                     EC_ERR(0x19)
-+#define EC_VAL_INVALID_LC                     EC_ERR(0x20)
-+#define EC_VAL_INVALID_VDMA_CH                EC_ERR(0x21)
-+#define EC_VAL_INVALID_CID                    EC_ERR(0x22)
-+#define EC_VAL_INVALID_UUI                    EC_ERR(0x23)
-+#define EC_VAL_INVALID_UUI_DISCARD            EC_ERR(0x24)
-+#define EC_VAL_CH_ALREADY_OPEN                EC_ERR(0x25)
-+
-+#define EC_VAL_RCB_MALLOC_FAILED              EC_ERR(0x26)
-+#define EC_VAL_RX_BUFFER_MALLOC_FAILED        EC_ERR(0x27)
-+#define EC_VAL_OUT_OF_TCBS                    EC_ERR(0x28)
-+#define EC_VAL_NO_TCBS                        EC_ERR(0x29)
-+#define EC_VAL_NULL_RCB                       EC_ERR(0x30)|EC_CRITICAL
-+#define EC_VAL_SOP_ERROR                      EC_ERR(0x31)|EC_CRITICAL
-+#define EC_VAL_EOP_ERROR                      EC_ERR(0x32)|EC_CRITICAL
-+#define EC_VAL_NULL_TCB                       EC_ERR(0x33)|EC_CRITICAL
-+#define EC_VAL_CORRUPT_RCB_CHAIN              EC_ERR(0x34)|EC_CRITICAL
-+#define EC_VAL_TCB_MALLOC_FAILED              EC_ERR(0x35)
-+
-+#define EC_VAL_DISABLE_POLLING_FAILED         EC_ERR(0x36)
-+#define EC_VAL_KEY_NOT_FOUND                  EC_ERR(0x37)
-+#define EC_VAL_MALLOC_FAILED                  EC_ERR(0x38)
-+#define EC_VAL_RESET_BASE_NOT_FOUND           EC_ERR(0x39)|EC_CRITICAL
-+#define EC_VAL_INVALID_STATE                  EC_ERR(0x40)
-+#define EC_VAL_NO_TXH_WORK_TO_DO              EC_ERR(0x41)
-+#define EC_VAL_NO_TXL_WORK_TO_DO              EC_ERR(0x42)
-+#define EC_VAL_NO_RX_WORK_TO_DO               EC_ERR(0x43)
-+#define EC_VAL_NOT_LINKED                     EC_ERR(0x44)
-+#define EC_VAL_INTERRUPT_NOT_FOUND            EC_ERR(0x45)
-+#define EC_VAL_OFFSET_NOT_FOUND               EC_ERR(0x46)
-+#define EC_VAL_MODULE_ALREADY_CLOSED          EC_ERR(0x47)
-+#define EC_VAL_MODULE_ALREADY_SHUTDOWN        EC_ERR(0x48)
-+#define EC_VAL_ACTION_NOT_FOUND               EC_ERR(0x49)
-+#define EC_VAL_RX_CH_ALREADY_SETUP            EC_ERR(0x50)
-+#define EC_VAL_TX_CH_ALREADY_SETUP            EC_ERR(0x51)
-+#define EC_VAL_RX_CH_ALREADY_OPEN             EC_ERR(0x52)
-+#define EC_VAL_TX_CH_ALREADY_OPEN             EC_ERR(0x53)
-+#define EC_VAL_CH_ALREADY_SETUP               EC_ERR(0x54)
-+#define EC_VAL_RCB_NEEDS_BUFFER               EC_ERR(0x55) /* +GSG 030410 */
-+#define EC_VAL_RCB_DROPPED                    EC_ERR(0x56) /* +GSG 030410 */
-+#define EC_VAL_INVALID_VALUE                  EC_ERR(0x57)
-+
-+/**
-+@defgroup shared_data Shared Data Structures
-+
-+The data structures documented here are shared by all modules.
-+*/
-+
-+/**
-+ *  @ingroup shared_data
-+ *  This is the fragment list structure.  Each fragment list entry contains a
-+ *  length and a data buffer.
-+ */
-+typedef struct
-+  {
-+   bit32u   len;    /**< Length of the fragment in bytes (lower 16 bits are valid).  For SOP, upper 16 bits is the buffer offset. */
-+   void     *data;  /**< Pointer to fragment data. */
-+   void     *OsInfo; /**< Pointer to OS defined data. */
-+  }FRAGLIST;
-+
-+#if defined (_CPHAL_CPMAC)
-+#define CB_PASSCRC_BIT     (1<<26)
-+
-+/* CPMAC CPHAL STATUS */
-+#define CPMAC_STATUS_LINK               (1 << 0)
-+#define CPMAC_STATUS_LINK_DUPLEX        (1 << 1)  /* 0 - HD, 1 - FD */
-+#define CPMAC_STATUS_LINK_SPEED         (1 << 2)  /* 0 - 10, 1 - 100 */
-+
-+/*   ADAPTER CHECK Codes */
-+
-+#define CPMAC_STATUS_ADAPTER_CHECK             (1 << 7)
-+#define CPMAC_STATUS_HOST_ERR_DIRECTION        (1 << 8)
-+#define CPMAC_STATUS_HOST_ERR_CODE             (0xF << 9)
-+#define CPMAC_STATUS_HOST_ERR_CH               (0x7 << 13)
-+
-+#define _CPMDIO_DISABLE                 (1 << 0)
-+#define _CPMDIO_HD                      (1 << 1)
-+#define _CPMDIO_FD                      (1 << 2)
-+#define _CPMDIO_10                      (1 << 3)
-+#define _CPMDIO_100                     (1 << 4)
-+#define _CPMDIO_NEG_OFF                 (1 << 5)
-+#define _CPMDIO_LOOPBK                  (1 << 16)
-+#define _CPMDIO_NOPHY                   (1 << 20)
-+#endif
-+
-+/**
-+ *  @ingroup shared_data
-+ *  Channel specific configuration information.  This structure should be
-+ *  populated by upper-layer software prior to calling @c ChannelSetup().  Any
-+ *  configuration item that can be changed on a per channel basis should
-+ *  be represented here.  Each module may define this structure with additional
-+ *  module-specific members.
-+ */
-+typedef struct
-+  {
-+   int Channel;        /**< Channel number. */
-+   int Direction;      /**< DIRECTION_RX(1) or DIRECTION_TX(0). */
-+   OS_SETUP *OsSetup;  /**< OS defined information associated with this channel. */
-+
-+#if defined(_CPHAL_AAL5) || defined (_CPHAL_CPSAR) || defined (_CPHAL_CPMAC)
-+   int RxBufSize;      /**< Size (in bytes) for each Rx buffer.*/
-+   int RxBufferOffset; /**< Number of bytes to offset rx data from start of buffer (must be less than buffer size). */
-+   int RxNumBuffers;   /**< The number of Rx buffer descriptors to allocate for Ch. */
-+   int RxServiceMax;   /**< Maximum number of packets to service at one time. */
-+
-+   int TxNumBuffers;   /**< The number of Tx buffer descriptors to allocate for Ch. */
-+   int TxNumQueues;    /**< Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. */
-+   int TxServiceMax;   /**< Maximum number of packets to service at one time. */
-+#endif
-+
-+#if defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+   int CpcsUU;      /**< The 2-byte CPCS UU and CPI information. */
-+   int Gfc;         /**< Generic Flow Control. */
-+   int Clp;         /**< Cell Loss Priority. */
-+   int Pti;         /**< Payload Type Indication. */
-+#endif
-+
-+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+   int DaMask;      /**< Specifies whether credit issuance is paused when Tx data not available. */
-+   int Priority;    /**< Priority bin this channel will be scheduled within. */
-+   int PktType;     /**< 0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2. */
-+   int Vci;         /**< Virtual Channel Identifier. */
-+   int Vpi;         /**< Virtual Path Identifier. */
-+   int FwdUnkVc;    /**< Enables forwarding of unknown VCI/VPI cells to host. 1=enable, 0=disable. */
-+
-+   /* Tx VC State */
-+   int TxVc_CellRate;  /**< Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR). */
-+   int TxVc_QosType;   /**< 0=CBR,1=VBR,2=UBR,3=UBRmcr. */
-+   int TxVc_Mbs;       /**< Min Burst Size in cells.*/
-+   int TxVc_Pcr;       /**< Peak Cell Rate for VBR in clock ticks between transmissions. */
-+
-+   bit32 TxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Tx Ch (must be big endian with 0 PTI). */
-+   int TxVc_OamTc;     /**< TC Path to transmit OAM cells for TX connection (0,1). */
-+   int TxVc_VpOffset;  /**< Offset to the OAM VP state table. */
-+   /* Rx VC State */
-+   int RxVc_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
-+   int RxVc_OamToHost; /**< 0=do not pass, 1=pass. */
-+   bit32 RxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx conn (must be big endian with 0 PTI). */
-+   int RxVc_OamTc;     /**< TC Path to transmit OAM cells for RX connection (0,1). */
-+   int RxVc_VpOffset;  /**< Offset to the OAM VP state table. */
-+   /* Tx VP State */
-+   int TxVp_OamTc;     /**< TC Path to transmit OAM cells for TX VP connection (0,1). */
-+   bit32 TxVp_AtmHeader; /**< ATM Header placed on firmware gen'd VP OAM cells for this Tx VP conn (must be big endian with 0 VCI). */
-+   /* Rx VP State  */
-+   int RxVp_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
-+   int RxVp_OamToHost; /**< 0=do not pass, 1=pass. */
-+   bit32 RxVp_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx VP conn (must be big endian with 0 VCI). */
-+   int RxVp_OamTc;     /**< TC Path to transmit OAM cells for RX VP connection (0,1). */
-+   int RxVp_OamVcList; /**< Indicates all VC channels associated with this VP channel (one-hot encoded). */
-+#endif
-+
-+
-+#ifdef _CPHAL_VDMAVT
-+   bit32u RemFifoAddr; /* Mirror mode only. */
-+   bit32u FifoAddr;
-+   bit32  PollInt;
-+   bit32  FifoSize;
-+   int    Ready;
-+#endif
-+
-+  }CHANNEL_INFO;
-+
-+/*
-+ *  This structure contains each statistic value gathered by the CPHAL.
-+ *  Applications may access statistics data by using the @c StatsGet() routine.
-+ */
-+/* STATS */
-+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+typedef struct
-+  {
-+   bit32u CrcErrors[16];
-+   bit32u LenErrors[16];
-+   bit32u DmaLenErrors[16];
-+   bit32u AbortErrors[16];
-+   bit32u StarvErrors[16];
-+   bit32u TxMisQCnt[16][2];
-+   bit32u RxMisQCnt[16];
-+   bit32u RxEOQCnt[16];
-+   bit32u TxEOQCnt[16][2];
-+   bit32u RxPacketsServiced[16];
-+   bit32u TxPacketsServiced[16][2];
-+   bit32u RxMaxServiced;
-+   bit32u TxMaxServiced[16][2];
-+   bit32u RxTotal;
-+   bit32u TxTotal;
-+  } STAT_INFO;
-+#endif
-+
-+/*
-+ *  VDMA Channel specific configuration information
-+ */
-+#ifdef _CPHAL_AAL2
-+typedef struct
-+  {
-+   int Ch;           /**< Channel Number */
-+   int RemoteEndian; /**< Endianness of remote VDMA-VT device */
-+   int CpsSwap;      /**< When 0, octet 0 in CPS pkt located in LS byte of 16-bit word sent to rem VDMA device.  When 1, in MS byte. */
-+  }VdmaChInfo;
-+#endif
-+
-+#ifndef _CPHAL
-+  typedef void HAL_DEVICE;
-+  typedef void HAL_PRIVATE;
-+  typedef void HAL_RCB;
-+  typedef void HAL_RECEIVEINFO;
-+#endif
-+
-+/**
-+ *  @ingroup shared_data
-+ *  The HAL_FUNCTIONS struct defines the function pointers used by upper layer
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to xxxInitModule().
-+ */
-+typedef struct
-+  {
-+  int  (*ChannelSetup)    (HAL_DEVICE *HalDev, CHANNEL_INFO *Channel, OS_SETUP *OsSetup);
-+  int  (*ChannelTeardown) (HAL_DEVICE *HalDev, int Channel, int Mode);
-+  int  (*Close)           (HAL_DEVICE *HalDev, int Mode);
-+  int  (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
-+  int  (*Init)            (HAL_DEVICE *HalDev);
-+  int  (*Open)            (HAL_DEVICE *HalDev);
-+  int  (*PacketProcessEnd) (HAL_DEVICE *HalDev);
-+  int  (*Probe)           (HAL_DEVICE *HalDev);
-+  int  (*RxReturn)        (HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
-+  int  (*Send)            (HAL_DEVICE *HalDev, FRAGLIST *FragList, int FragCount, int PacketSize, OS_SENDINFO *OsSendInfo, bit32u Mode);
-+  int  (*Shutdown)        (HAL_DEVICE *HalDev);
-+  int  (*Tick)            (HAL_DEVICE *HalDev);
-+
-+#ifdef _CPHAL_AAL5
-+  int  (*Kick) (HAL_DEVICE *HalDev, int Queue);
-+  void (*OamFuncConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig);
-+  void (*OamLoopbackConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag);
-+  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+  STAT_INFO*  (*StatsGetOld)(HAL_DEVICE *HalDev);
-+#endif
-+  } HAL_FUNCTIONS;
-+
-+/**
-+ *  @ingroup shared_data
-+ *  The OS_FUNCTIONS struct defines the function pointers for all upper layer
-+ *  functions accessible to the CPHAL.  The upper layer software is responsible
-+ *  for providing the correct OS-specific implementations for the following
-+ *  functions. It is populated by calling InitModule() (done by the CPHAL in
-+ *  xxxInitModule().
-+ */
-+typedef struct
-+  {
-+  int   (*Control)(OS_DEVICE *OsDev, const char *Key, const char *Action, void *Value);
-+  void  (*CriticalOn)(void);
-+  void  (*CriticalOff)(void);
-+  void  (*DataCacheHitInvalidate)(void *MemPtr, int Size);
-+  void  (*DataCacheHitWriteback)(void *MemPtr, int Size);
-+  int   (*DeviceFindInfo)(int Inst, const char *DeviceName, void *DeviceInfo);
-+  int   (*DeviceFindParmUint)(void *DeviceInfo, const char *Parm, bit32u *Value);
-+  int   (*DeviceFindParmValue)(void *DeviceInfo, const char *Parm, void *Value);
-+  void  (*Free)(void *MemPtr);
-+  void  (*FreeRxBuffer)(OS_RECEIVEINFO *OsReceiveInfo, void *MemPtr);
-+  void  (*FreeDev)(void *MemPtr);
-+  void  (*FreeDmaXfer)(void *MemPtr);
-+  void  (*IsrRegister)(OS_DEVICE *OsDev, int (*halISR)(HAL_DEVICE*, int*), int InterruptBit);
-+  void  (*IsrUnRegister)(OS_DEVICE *OsDev, int InterruptBit);
-+  void* (*Malloc)(bit32u size);
-+  void* (*MallocDev)(bit32u Size);
-+  void* (*MallocDmaXfer)(bit32u size, void *MemBase, bit32u MemRange);
-+  void* (*MallocRxBuffer)(bit32u size, void *MemBase, bit32u MemRange,
-+                       OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo,
-+                       OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev);
-+  void* (*Memset)(void *Dest, int C, bit32u N);
-+  int   (*Printf)(const char *Format, ...);
-+  int   (*Receive)(OS_DEVICE *OsDev,FRAGLIST *FragList,bit32u FragCount,
-+                 bit32u PacketSize,HAL_RECEIVEINFO *HalReceiveInfo, bit32u Mode);
-+  int   (*SendComplete)(OS_SENDINFO *OsSendInfo);
-+  int   (*Sprintf)(char *S, const char *Format, ...);
-+  int   (*Strcmpi)(const char *Str1, const char *Str2);
-+  unsigned int (*Strlen)(const char *S);
-+  char* (*Strstr)(const char *S1, const char *S2);
-+  unsigned long  (*Strtoul)(const char *Str, char **Endptr, int Base);
-+  void  (*TeardownComplete)(OS_DEVICE *OsDev, int Ch, int Direction);
-+  } OS_FUNCTIONS;
-+
-+/************** MODULE SPECIFIC STUFF BELOW **************/
-+
-+#ifdef _CPHAL_CPMAC
-+
-+/*
-+int halCpmacInitModule(HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, int (*osBridgeInitModule)(OS_FUNCTIONS *), void* (*osMallocDev) (bit32u), int *Size, int inst);
-+*/
-+
-+int halCpmacInitModule(HAL_DEVICE **HalDev,
-+                 OS_DEVICE *OsDev,
-+                 HAL_FUNCTIONS **HalFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+/*
-+ *  @ingroup shared_data
-+ *  The AAL5_FUNCTIONS struct defines the AAL5 function pointers used by upper layer
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to cphalInitModule().
-+ */
-+/*
-+typedef struct
-+  {
-+  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
-+  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
-+  int  (*Init)(HAL_DEVICE *HalDev);
-+  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
-+  int  (*Open)(HAL_DEVICE *HalDev);
-+  int  (*InfoGet)(HAL_DEVICE *HalDev, int Key, void *Value);
-+  int  (*Probe)(HAL_DEVICE *HalDev);
-+  int  (*RxReturn)(HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
-+  int  (*Send)(HAL_DEVICE *HalDev,FRAGLIST *FragList,int FragCount,
-+                 int PacketSize,OS_SENDINFO *OsSendInfo,int Ch, int Queue,
-+                 bit32u Mode);
-+  int  (*StatsClear)(HAL_DEVICE *HalDev);
-+  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
-+  int  (*Status)(HAL_DEVICE *HalDev);
-+  void (*Tick)(HAL_DEVICE *HalDev);
-+  int  (*Kick)(HAL_DEVICE *HalDev, int Queue);
-+  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+  } AAL5_FUNCTIONS;
-+*/
-+
-+int cpaal5InitModule(HAL_DEVICE **HalDev,
-+                 OS_DEVICE *OsDev,
-+                 HAL_FUNCTIONS **HalFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+/**
-+ *  @ingroup shared_data
-+ *  The AAL2_FUNCTIONS struct defines the AAL2 function pointers used by upper layer
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to cphalInitModule().
-+ */
-+typedef struct
-+  {
-+  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
-+  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
-+  int  (*Init)(HAL_DEVICE *HalDev);
-+  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
-+  int  (*Open)(HAL_DEVICE *HalDev);
-+  int  (*OptionsGet)(HAL_DEVICE *HalDev, char *Key, bit32u *Value);
-+  int  (*Probe)(HAL_DEVICE *HalDev);
-+
-+  int  (*StatsClear)(HAL_DEVICE *HalDev);
-+  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
-+  int  (*Status)(HAL_DEVICE *HalDev);
-+  void (*Tick)(HAL_DEVICE *HalDev);
-+  int  (*Aal2UuiMappingSetup)(HAL_DEVICE *HalDev, int VC, int UUI,
-+                                    int VdmaCh, int UUIDiscard);
-+  int  (*Aal2RxMappingSetup)(HAL_DEVICE *HalDev, int VC, int CID,
-+                                   int LC);
-+  int  (*Aal2TxMappingSetup)(HAL_DEVICE *HalDev, int VC, int LC, int VdmaCh);
-+  int  (*Aal2VdmaChSetup)(HAL_DEVICE *HalDev, bit32u RemVdmaVtAddr,
-+                               VdmaChInfo *VdmaCh);
-+  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+  int  (*Aal2ModeChange)(HAL_DEVICE *HalDev, int Vc, int RxCrossMode,
-+                           int RxMultiMode, int TxMultiMode, int SchedMode,
-+                           int TcCh);
-+  void (*Aal2VdmaEnable)(HAL_DEVICE *HalDev, int Ch);
-+  int  (*Aal2VdmaDisable)(HAL_DEVICE *HalDev, int Ch);
-+  } AAL2_FUNCTIONS;
-+
-+int cpaal2InitModule(HAL_DEVICE **HalDev,
-+                 OS_DEVICE *OsDev,
-+                 AAL2_FUNCTIONS **HalFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+#endif
-+
-+#ifdef _CPHAL_VDMAVT
-+/**
-+ *  @ingroup shared_data
-+ *  The VDMA_FUNCTIONS struct defines the HAL function pointers used by upper layer
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to InitModule().
-+ *
-+ *  Note that this list is still under definition.
-+ */
-+typedef struct
-+  {
-+  bit32  (*Init)( HAL_DEVICE *VdmaVtDev);
-+    /*  bit32  (*SetupTxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
-+                  bit32u Addr, bit32u Size, bit32u PollInt);
-+    bit32  (*SetupRxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
-+                  bit32u Addr, bit32u Size, bit32u PollInt); */
-+  bit32  (*Tx)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*Rx)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*SetRemoteChannel)(HAL_DEVICE *VdmaVtDev, bit32u RemAddr,
-+                         bit32u RemDevID);
-+  bit32  (*ClearRxInt)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*ClearTxInt)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*Open)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*Close)(HAL_DEVICE *VdmaVtDev);
-+  int    (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
-+  int    (*ChannelSetup)(HAL_DEVICE *VdmaVtDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+  int    (*ChannelTeardown)(HAL_DEVICE *VdmaVtDev, int Ch, int Mode);
-+  int    (*Send)(HAL_DEVICE *VdmaVtDev,FRAGLIST *FragList,int FragCount,
-+                 int PacketSize,OS_SENDINFO *OsSendInfo,bit32u Mode);
-+  } VDMA_FUNCTIONS;
-+
-+int VdmaInitModule(HAL_DEVICE **VdmaVt,
-+                 OS_DEVICE *OsDev,
-+                 VDMA_FUNCTIONS **VdmaVtFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+#endif
-+
-+/*
-+extern int cphalInitModule(MODULE_TYPE ModuleType, HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc,
-+                      int (*osInitModule)(OS_FUNCTIONS *), void* (*osMallocDev)(bit32u),
-+                      int *Size, int Inst);
-+*/
-+
-+
-+#ifdef _CPHAL_AAL5
-+extern const char hcSarFrequency[];
-+#endif
-+
-+#ifdef _CPHAL_CPMAC
-+/* following will be common, once 'utl' added */
-+extern const char hcClear[];
-+extern const char hcGet[];
-+extern const char hcSet[];
-+extern const char hcTick[];
-+
-+extern const char hcCpuFrequency[];
-+extern const char hcCpmacFrequency[];
-+extern const char hcMdioBusFrequency[];
-+extern const char hcMdioClockFrequency[];
-+extern const char hcCpmacBase[];
-+extern const char hcPhyNum[];
-+extern const char hcSize[];
-+extern const char hcCpmacSize[];
-+extern const char hcPhyAccess[];
-+#endif
-+
-+#endif  /*  end of _INC_    */
-diff -urN linux.old/drivers/atm/sangam_atm/cpswhal_cpsar.h linux.dev/drivers/atm/sangam_atm/cpswhal_cpsar.h
---- linux.old/drivers/atm/sangam_atm/cpswhal_cpsar.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpswhal_cpsar.h	2005-08-23 04:46:50.089844912 +0200
-@@ -0,0 +1,629 @@
-+/************************************************************************
-+ *  TNETDxxxx Software Support
-+ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ *  FILE: cphal.h
-+ *
-+ *  DESCRIPTION:
-+ *      User include file, contains data definitions shared between the CPHAL
-+ *      and the upper-layer software.
-+ *
-+ *  HISTORY:
-+ *      Date      Modifier  Ver    Notes
-+ *      28Feb02   Greg      1.00   Original
-+ *      06Mar02   Greg      1.01   Documentation enhanced
-+ *      18Jul02   Greg      1.02   Many updates (OAM additions, general reorg)
-+ *      22Nov02   Mick      RC2    Additions from Denis' input on Control
-+ *
-+ *  author  Greg Guyotte
-+ *  version 1.02
-+ *  date    18-Jul-2002
-+ *****************************************************************************/
-+#ifndef _INC_CPHAL_H
-+#define _INC_CPHAL_H
-+
-+#ifdef _CPHAL_CPMAC
-+#include "ec_errors_cpmac.h"
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+#include "ec_errors_cpaal5.h"
-+#endif
-+
-+#ifdef _CPHAL_CPSAR
-+#include "ec_errors_cpsar.h"
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+#include "ec_errors_cpaal2.h"
-+#endif
-+
-+#ifndef __ADAM2
-+typedef char           bit8;
-+typedef short          bit16;
-+typedef int            bit32;
-+
-+typedef unsigned char  bit8u;
-+typedef unsigned short bit16u;
-+typedef unsigned int   bit32u;
-+
-+/*
-+typedef char           INT8;
-+typedef short          INT16;
-+typedef int            INT32;
-+typedef unsigned char  UINT8;
-+typedef unsigned short UINT16;
-+typedef unsigned int   UINT32;
-+*/
-+/*typedef unsigned int   size_t;*/
-+#endif
-+
-+#ifdef _CPHAL
-+
-+#ifndef TRUE
-+#define TRUE (1==1)
-+#endif
-+
-+#ifndef FALSE
-+#define FALSE (1==2)
-+#endif
-+
-+#ifndef NULL
-+#define NULL 0
-+#endif
-+
-+#endif
-+
-+#define        VirtToPhys(a)                 (((int)a)&~0xe0000000)
-+#define        VirtToVirtNoCache(a)          ((void*)((VirtToPhys(a))|0xa0000000))
-+#define        VirtToVirtCache(a)            ((void*)((VirtToPhys(a))|0x80000000))
-+#define        PhysToVirtNoCache(a)          ((void*)(((int)a)|0xa0000000))
-+#define        PhysToVirtCache(a)            ((void*)(((int)a)|0x80000000))
-+/*
-+#define        DataCacheHitInvalidate(a)     {__asm__(" cache  17, (%0)" :   : "r" (a));}
-+#define        DataCacheHitWriteback(a)      {__asm__(" cache  25, (%0)" :   : "r" (a));}
-+*/
-+
-+#define PARTIAL 1     /**< Used in @c Close() and @c ChannelTeardown() */
-+#define FULL 2        /**< Used in @c Close() and @c ChannelTeardown() */
-+
-+/* Channel Teardown Defines */
-+#define RX_TEARDOWN 2
-+#define TX_TEARDOWN 1
-+#define BLOCKING_TEARDOWN 8
-+#define FULL_TEARDOWN 4
-+#define PARTIAL_TEARDOWN 0
-+
-+#define MAX_DIR 2
-+#define DIRECTION_TX 0
-+#define DIRECTION_RX 1
-+#define TX_CH 0
-+#define RX_CH 1
-+#define HAL_ERROR_DEVICE_NOT_FOUND    1
-+#define HAL_ERROR_FAILED_MALLOC       2
-+#define HAL_ERROR_OSFUNC_SIZE         3
-+#define HAL_DEFAULT  0xFFFFFFFF
-+#define VALID(val)    (val!=HAL_DEFAULT)
-+
-+/*
-+ERROR REPORTING
-+
-+HAL Module Codes.  Each HAL module reporting an error code
-+should OR the error code with the respective Module error code
-+from the list below.
-+*/
-+#define EC_AAL5                                EC_HAL|EC_DEV_AAL5
-+#define EC_AAL2                                EC_HAL|EC_DEV_AAL2
-+#define EC_CPSAR                               EC_HAL|EC_DEV_CPSAR
-+#define EC_CPMAC                               EC_HAL|EC_DEV_CPMAC
-+#define EC_VDMA                                EC_HAL|EC_DEV_VDMA
-+#define EC_VLYNQ                               EC_HAL|EC_DEV_VLYNQ
-+#define EC_CPPI                                EC_HAL|EC_DEV_CPPI
-+
-+/*
-+HAL Function Codes.  Each HAL module reporting an error code
-+should OR the error code with one of the function codes from
-+the list below.
-+*/
-+#define EC_FUNC_HAL_INIT                       EC_FUNC(1)
-+#define EC_FUNC_CHSETUP                        EC_FUNC(2)
-+#define EC_FUNC_CHTEARDOWN                     EC_FUNC(3)
-+#define EC_FUNC_RXRETURN                       EC_FUNC(4)
-+#define EC_FUNC_SEND                           EC_FUNC(5)
-+#define EC_FUNC_RXINT                          EC_FUNC(6)
-+#define EC_FUNC_TXINT                          EC_FUNC(7)
-+#define EC_FUNC_AAL2_VDMA                      EC_FUNC(8)
-+#define EC_FUNC_OPTIONS                        EC_FUNC(9)
-+#define EC_FUNC_PROBE                          EC_FUNC(10)
-+#define EC_FUNC_OPEN                           EC_FUNC(11)
-+#define EC_FUNC_CONTROL                        EC_FUNC(12)
-+#define EC_FUNC_DEVICE_INT                     EC_FUNC(13)
-+#define EC_FUNC_STATUS                         EC_FUNC(14)
-+#define EC_FUNC_TICK                           EC_FUNC(15)
-+#define EC_FUNC_CLOSE                          EC_FUNC(16)
-+#define EC_FUNC_SHUTDOWN                       EC_FUNC(17)
-+#define EC_FUNC_DEVICE_INT_ALT                 EC_FUNC(18) /* +GSG 030306 */
-+
-+/*
-+HAL Error Codes.  The list below defines every type of error
-+used in all HAL modules. DO NOT CHANGE THESE VALUES!  Add new
-+values in integer order to the bottom of the list.
-+*/
-+#define EC_VAL_PDSP_LOAD_FAIL                 EC_ERR(0x01)|EC_CRITICAL
-+#define EC_VAL_FIRMWARE_TOO_LARGE             EC_ERR(0x02)|EC_CRITICAL
-+#define EC_VAL_DEVICE_NOT_FOUND               EC_ERR(0x03)|EC_CRITICAL
-+#define EC_VAL_BASE_ADDR_NOT_FOUND            EC_ERR(0x04)|EC_CRITICAL
-+#define EC_VAL_RESET_BIT_NOT_FOUND            EC_ERR(0x05)|EC_CRITICAL
-+#define EC_VAL_CH_INFO_NOT_FOUND              EC_ERR(0x06)
-+#define EC_VAL_RX_STATE_RAM_NOT_CLEARED       EC_ERR(0x07)|EC_CRITICAL
-+#define EC_VAL_TX_STATE_RAM_NOT_CLEARED       EC_ERR(0x08)|EC_CRITICAL
-+#define EC_VAL_MALLOC_DEV_FAILED              EC_ERR(0x09)
-+#define EC_VAL_OS_VERSION_NOT_SUPPORTED       EC_ERR(0x0A)|EC_CRITICAL
-+#define EC_VAL_CPSAR_VERSION_NOT_SUPPORTED    EC_ERR(0x0B)|EC_CRITICAL
-+#define EC_VAL_NULL_CPSAR_DEV                 EC_ERR(0x0C)|EC_CRITICAL
-+
-+#define EC_VAL_LUT_NOT_READY                  EC_ERR(0x0D)
-+#define EC_VAL_INVALID_CH                     EC_ERR(0x0E)
-+#define EC_VAL_NULL_CH_STRUCT                 EC_ERR(0x0F)
-+#define EC_VAL_RX_TEARDOWN_ALREADY_PEND       EC_ERR(0x10)
-+#define EC_VAL_TX_TEARDOWN_ALREADY_PEND       EC_ERR(0x11)
-+#define EC_VAL_RX_CH_ALREADY_TORNDOWN         EC_ERR(0x12)
-+#define EC_VAL_TX_CH_ALREADY_TORNDOWN         EC_ERR(0x13)
-+#define EC_VAL_TX_TEARDOWN_TIMEOUT            EC_ERR(0x14)
-+#define EC_VAL_RX_TEARDOWN_TIMEOUT            EC_ERR(0x15)
-+#define EC_VAL_CH_ALREADY_TORNDOWN            EC_ERR(0x16)
-+#define EC_VAL_VC_SETUP_NOT_READY             EC_ERR(0x17)
-+#define EC_VAL_VC_TEARDOWN_NOT_READY          EC_ERR(0x18)
-+#define EC_VAL_INVALID_VC                     EC_ERR(0x19)
-+#define EC_VAL_INVALID_LC                     EC_ERR(0x20)
-+#define EC_VAL_INVALID_VDMA_CH                EC_ERR(0x21)
-+#define EC_VAL_INVALID_CID                    EC_ERR(0x22)
-+#define EC_VAL_INVALID_UUI                    EC_ERR(0x23)
-+#define EC_VAL_INVALID_UUI_DISCARD            EC_ERR(0x24)
-+#define EC_VAL_CH_ALREADY_OPEN                EC_ERR(0x25)
-+
-+#define EC_VAL_RCB_MALLOC_FAILED              EC_ERR(0x26)
-+#define EC_VAL_RX_BUFFER_MALLOC_FAILED        EC_ERR(0x27)
-+#define EC_VAL_OUT_OF_TCBS                    EC_ERR(0x28)
-+#define EC_VAL_NO_TCBS                        EC_ERR(0x29)
-+#define EC_VAL_NULL_RCB                       EC_ERR(0x30)|EC_CRITICAL
-+#define EC_VAL_SOP_ERROR                      EC_ERR(0x31)|EC_CRITICAL
-+#define EC_VAL_EOP_ERROR                      EC_ERR(0x32)|EC_CRITICAL
-+#define EC_VAL_NULL_TCB                       EC_ERR(0x33)|EC_CRITICAL
-+#define EC_VAL_CORRUPT_RCB_CHAIN              EC_ERR(0x34)|EC_CRITICAL
-+#define EC_VAL_TCB_MALLOC_FAILED              EC_ERR(0x35)
-+
-+#define EC_VAL_DISABLE_POLLING_FAILED         EC_ERR(0x36)
-+#define EC_VAL_KEY_NOT_FOUND                  EC_ERR(0x37)
-+#define EC_VAL_MALLOC_FAILED                  EC_ERR(0x38)
-+#define EC_VAL_RESET_BASE_NOT_FOUND           EC_ERR(0x39)|EC_CRITICAL
-+#define EC_VAL_INVALID_STATE                  EC_ERR(0x40)
-+#define EC_VAL_NO_TXH_WORK_TO_DO              EC_ERR(0x41)
-+#define EC_VAL_NO_TXL_WORK_TO_DO              EC_ERR(0x42)
-+#define EC_VAL_NO_RX_WORK_TO_DO               EC_ERR(0x43)
-+#define EC_VAL_NOT_LINKED                     EC_ERR(0x44)
-+#define EC_VAL_INTERRUPT_NOT_FOUND            EC_ERR(0x45)
-+#define EC_VAL_OFFSET_NOT_FOUND               EC_ERR(0x46)
-+#define EC_VAL_MODULE_ALREADY_CLOSED          EC_ERR(0x47)
-+#define EC_VAL_MODULE_ALREADY_SHUTDOWN        EC_ERR(0x48)
-+#define EC_VAL_ACTION_NOT_FOUND               EC_ERR(0x49)
-+#define EC_VAL_RX_CH_ALREADY_SETUP            EC_ERR(0x50)
-+#define EC_VAL_TX_CH_ALREADY_SETUP            EC_ERR(0x51)
-+#define EC_VAL_RX_CH_ALREADY_OPEN             EC_ERR(0x52)
-+#define EC_VAL_TX_CH_ALREADY_OPEN             EC_ERR(0x53)
-+#define EC_VAL_CH_ALREADY_SETUP               EC_ERR(0x54)
-+#define EC_VAL_RCB_NEEDS_BUFFER               EC_ERR(0x55) /* +GSG 030410 */
-+#define EC_VAL_RCB_DROPPED                    EC_ERR(0x56) /* +GSG 030410 */
-+#define EC_VAL_INVALID_VALUE                  EC_ERR(0x57)
-+
-+/**
-+@defgroup shared_data Shared Data Structures
-+
-+The data structures documented here are shared by all modules.
-+*/
-+
-+/**
-+ *  @ingroup shared_data
-+ *  This is the fragment list structure.  Each fragment list entry contains a
-+ *  length and a data buffer.
-+ */
-+typedef struct
-+  {
-+   bit32u   len;    /**< Length of the fragment in bytes (lower 16 bits are valid).  For SOP, upper 16 bits is the buffer offset. */
-+   void     *data;  /**< Pointer to fragment data. */
-+   void     *OsInfo; /**< Pointer to OS defined data. */
-+  }FRAGLIST;
-+
-+#if defined (_CPHAL_CPMAC)
-+#define CB_PASSCRC_BIT     (1<<26)
-+
-+/* CPMAC CPHAL STATUS */
-+#define CPMAC_STATUS_LINK               (1 << 0)
-+#define CPMAC_STATUS_LINK_DUPLEX        (1 << 1)  /* 0 - HD, 1 - FD */
-+#define CPMAC_STATUS_LINK_SPEED         (1 << 2)  /* 0 - 10, 1 - 100 */
-+
-+/*   ADAPTER CHECK Codes */
-+
-+#define CPMAC_STATUS_ADAPTER_CHECK             (1 << 7)
-+#define CPMAC_STATUS_HOST_ERR_DIRECTION        (1 << 8)
-+#define CPMAC_STATUS_HOST_ERR_CODE             (0xF << 9)
-+#define CPMAC_STATUS_HOST_ERR_CH               (0x7 << 13)
-+
-+#define _CPMDIO_DISABLE                 (1 << 0)
-+#define _CPMDIO_HD                      (1 << 1)
-+#define _CPMDIO_FD                      (1 << 2)
-+#define _CPMDIO_10                      (1 << 3)
-+#define _CPMDIO_100                     (1 << 4)
-+#define _CPMDIO_NEG_OFF                 (1 << 5)
-+#define _CPMDIO_LOOPBK                  (1 << 16)
-+#define _CPMDIO_NOPHY                   (1 << 20)
-+#endif
-+
-+/**
-+ *  @ingroup shared_data
-+ *  Channel specific configuration information.  This structure should be
-+ *  populated by upper-layer software prior to calling @c ChannelSetup().  Any
-+ *  configuration item that can be changed on a per channel basis should
-+ *  be represented here.  Each module may define this structure with additional
-+ *  module-specific members.
-+ */
-+typedef struct
-+  {
-+   int Channel;        /**< Channel number. */
-+   int Direction;      /**< DIRECTION_RX(1) or DIRECTION_TX(0). */
-+   OS_SETUP *OsSetup;  /**< OS defined information associated with this channel. */
-+
-+#if defined(_CPHAL_AAL5) || defined (_CPHAL_CPSAR) || defined (_CPHAL_CPMAC)
-+   int RxBufSize;      /**< Size (in bytes) for each Rx buffer.*/
-+   int RxBufferOffset; /**< Number of bytes to offset rx data from start of buffer (must be less than buffer size). */
-+   int RxNumBuffers;   /**< The number of Rx buffer descriptors to allocate for Ch. */
-+   int RxServiceMax;   /**< Maximum number of packets to service at one time. */
-+
-+   int TxNumBuffers;   /**< The number of Tx buffer descriptors to allocate for Ch. */
-+   int TxNumQueues;    /**< Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. */
-+   int TxServiceMax;   /**< Maximum number of packets to service at one time. */
-+#endif
-+
-+#if defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+   int CpcsUU;      /**< The 2-byte CPCS UU and CPI information. */
-+   int Gfc;         /**< Generic Flow Control. */
-+   int Clp;         /**< Cell Loss Priority. */
-+   int Pti;         /**< Payload Type Indication. */
-+#endif
-+
-+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+   int DaMask;      /**< Specifies whether credit issuance is paused when Tx data not available. */
-+   int Priority;    /**< Priority bin this channel will be scheduled within. */
-+   int PktType;     /**< 0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2. */
-+   int Vci;         /**< Virtual Channel Identifier. */
-+   int Vpi;         /**< Virtual Path Identifier. */
-+   int FwdUnkVc;    /**< Enables forwarding of unknown VCI/VPI cells to host. 1=enable, 0=disable. */
-+
-+   /* Tx VC State */
-+   int TxVc_CellRate;  /**< Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR). */
-+   int TxVc_QosType;   /**< 0=CBR,1=VBR,2=UBR,3=UBRmcr. */
-+   int TxVc_Mbs;       /**< Min Burst Size in cells.*/
-+   int TxVc_Pcr;       /**< Peak Cell Rate for VBR in clock ticks between transmissions. */
-+
-+   bit32 TxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Tx Ch (must be big endian with 0 PTI). */
-+   int TxVc_OamTc;     /**< TC Path to transmit OAM cells for TX connection (0,1). */
-+   int TxVc_VpOffset;  /**< Offset to the OAM VP state table. */
-+   /* Rx VC State */
-+   int RxVc_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
-+   int RxVc_OamToHost; /**< 0=do not pass, 1=pass. */
-+   bit32 RxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx conn (must be big endian with 0 PTI). */
-+   int RxVc_OamTc;     /**< TC Path to transmit OAM cells for RX connection (0,1). */
-+   int RxVc_VpOffset;  /**< Offset to the OAM VP state table. */
-+   /* Tx VP State */
-+   int TxVp_OamTc;     /**< TC Path to transmit OAM cells for TX VP connection (0,1). */
-+   bit32 TxVp_AtmHeader; /**< ATM Header placed on firmware gen'd VP OAM cells for this Tx VP conn (must be big endian with 0 VCI). */
-+   /* Rx VP State  */
-+   int RxVp_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
-+   int RxVp_OamToHost; /**< 0=do not pass, 1=pass. */
-+   bit32 RxVp_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx VP conn (must be big endian with 0 VCI). */
-+   int RxVp_OamTc;     /**< TC Path to transmit OAM cells for RX VP connection (0,1). */
-+   int RxVp_OamVcList; /**< Indicates all VC channels associated with this VP channel (one-hot encoded). */
-+#endif
-+
-+
-+#ifdef _CPHAL_VDMAVT
-+   bit32u RemFifoAddr; /* Mirror mode only. */
-+   bit32u FifoAddr;
-+   bit32  PollInt;
-+   bit32  FifoSize;
-+   int    Ready;
-+#endif
-+
-+  }CHANNEL_INFO;
-+
-+/*
-+ *  This structure contains each statistic value gathered by the CPHAL.
-+ *  Applications may access statistics data by using the @c StatsGet() routine.
-+ */
-+/* STATS */
-+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+typedef struct
-+  {
-+   bit32u CrcErrors[16];
-+   bit32u LenErrors[16];
-+   bit32u DmaLenErrors[16];
-+   bit32u AbortErrors[16];
-+   bit32u StarvErrors[16];
-+   bit32u TxMisQCnt[16][2];
-+   bit32u RxMisQCnt[16];
-+   bit32u RxEOQCnt[16];
-+   bit32u TxEOQCnt[16][2];
-+   bit32u RxPacketsServiced[16];
-+   bit32u TxPacketsServiced[16][2];
-+   bit32u RxMaxServiced;
-+   bit32u TxMaxServiced[16][2];
-+   bit32u RxTotal;
-+   bit32u TxTotal;
-+  } STAT_INFO;
-+#endif
-+
-+/*
-+ *  VDMA Channel specific configuration information
-+ */
-+#ifdef _CPHAL_AAL2
-+typedef struct
-+  {
-+   int Ch;           /**< Channel Number */
-+   int RemoteEndian; /**< Endianness of remote VDMA-VT device */
-+   int CpsSwap;      /**< When 0, octet 0 in CPS pkt located in LS byte of 16-bit word sent to rem VDMA device.  When 1, in MS byte. */
-+  }VdmaChInfo;
-+#endif
-+
-+#ifndef _CPHAL
-+  typedef void HAL_DEVICE;
-+  typedef void HAL_PRIVATE;
-+  typedef void HAL_RCB;
-+  typedef void HAL_RECEIVEINFO;
-+#endif
-+
-+/**
-+ *  @ingroup shared_data
-+ *  The HAL_FUNCTIONS struct defines the function pointers used by upper layer
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to xxxInitModule().
-+ */
-+typedef struct
-+  {
-+  int  (*ChannelSetup)    (HAL_DEVICE *HalDev, CHANNEL_INFO *Channel, OS_SETUP *OsSetup);
-+  int  (*ChannelTeardown) (HAL_DEVICE *HalDev, int Channel, int Mode);
-+  int  (*Close)           (HAL_DEVICE *HalDev, int Mode);
-+  int  (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
-+  int  (*Init)            (HAL_DEVICE *HalDev);
-+  int  (*Open)            (HAL_DEVICE *HalDev);
-+  int  (*PacketProcessEnd) (HAL_DEVICE *HalDev);
-+  int  (*Probe)           (HAL_DEVICE *HalDev);
-+  int  (*RxReturn)        (HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
-+  int  (*Send)            (HAL_DEVICE *HalDev, FRAGLIST *FragList, int FragCount, int PacketSize, OS_SENDINFO *OsSendInfo, bit32u Mode);
-+  int  (*Shutdown)        (HAL_DEVICE *HalDev);
-+  int  (*Tick)            (HAL_DEVICE *HalDev);
-+
-+#ifdef _CPHAL_AAL5
-+  int  (*Kick) (HAL_DEVICE *HalDev, int Queue);
-+  void (*OamFuncConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig);
-+  void (*OamLoopbackConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag);
-+  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+  STAT_INFO*  (*StatsGetOld)(HAL_DEVICE *HalDev);
-+#endif
-+  } HAL_FUNCTIONS;
-+
-+/**
-+ *  @ingroup shared_data
-+ *  The OS_FUNCTIONS struct defines the function pointers for all upper layer
-+ *  functions accessible to the CPHAL.  The upper layer software is responsible
-+ *  for providing the correct OS-specific implementations for the following
-+ *  functions. It is populated by calling InitModule() (done by the CPHAL in
-+ *  xxxInitModule().
-+ */
-+typedef struct
-+  {
-+  int   (*Control)(OS_DEVICE *OsDev, const char *Key, const char *Action, void *Value);
-+  void  (*CriticalOn)(void);
-+  void  (*CriticalOff)(void);
-+  void  (*DataCacheHitInvalidate)(void *MemPtr, int Size);
-+  void  (*DataCacheHitWriteback)(void *MemPtr, int Size);
-+  int   (*DeviceFindInfo)(int Inst, const char *DeviceName, void *DeviceInfo);
-+  int   (*DeviceFindParmUint)(void *DeviceInfo, const char *Parm, bit32u *Value);
-+  int   (*DeviceFindParmValue)(void *DeviceInfo, const char *Parm, void *Value);
-+  void  (*Free)(void *MemPtr);
-+  void  (*FreeRxBuffer)(OS_RECEIVEINFO *OsReceiveInfo, void *MemPtr);
-+  void  (*FreeDev)(void *MemPtr);
-+  void  (*FreeDmaXfer)(void *MemPtr);
-+  void  (*IsrRegister)(OS_DEVICE *OsDev, int (*halISR)(HAL_DEVICE*, int*), int InterruptBit);
-+  void  (*IsrUnRegister)(OS_DEVICE *OsDev, int InterruptBit);
-+  void* (*Malloc)(bit32u size);
-+  void* (*MallocDev)(bit32u Size);
-+  void* (*MallocDmaXfer)(bit32u size, void *MemBase, bit32u MemRange);
-+  void* (*MallocRxBuffer)(bit32u size, void *MemBase, bit32u MemRange,
-+                       OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo,
-+                       OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev);
-+  void* (*Memset)(void *Dest, int C, bit32u N);
-+  int   (*Printf)(const char *Format, ...);
-+  int   (*Receive)(OS_DEVICE *OsDev,FRAGLIST *FragList,bit32u FragCount,
-+                 bit32u PacketSize,HAL_RECEIVEINFO *HalReceiveInfo, bit32u Mode);
-+  int   (*SendComplete)(OS_SENDINFO *OsSendInfo);
-+  int   (*Sprintf)(char *S, const char *Format, ...);
-+  int   (*Strcmpi)(const char *Str1, const char *Str2);
-+  unsigned int (*Strlen)(const char *S);
-+  char* (*Strstr)(const char *S1, const char *S2);
-+  unsigned long  (*Strtoul)(const char *Str, char **Endptr, int Base);
-+  void  (*TeardownComplete)(OS_DEVICE *OsDev, int Ch, int Direction);
-+  } OS_FUNCTIONS;
-+
-+/************** MODULE SPECIFIC STUFF BELOW **************/
-+
-+#ifdef _CPHAL_CPMAC
-+
-+/*
-+int halCpmacInitModule(HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, int (*osBridgeInitModule)(OS_FUNCTIONS *), void* (*osMallocDev) (bit32u), int *Size, int inst);
-+*/
-+
-+int halCpmacInitModule(HAL_DEVICE **HalDev,
-+                 OS_DEVICE *OsDev,
-+                 HAL_FUNCTIONS **HalFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+/*
-+ *  @ingroup shared_data
-+ *  The AAL5_FUNCTIONS struct defines the AAL5 function pointers used by upper layer
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to cphalInitModule().
-+ */
-+/*
-+typedef struct
-+  {
-+  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
-+  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
-+  int  (*Init)(HAL_DEVICE *HalDev);
-+  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
-+  int  (*Open)(HAL_DEVICE *HalDev);
-+  int  (*InfoGet)(HAL_DEVICE *HalDev, int Key, void *Value);
-+  int  (*Probe)(HAL_DEVICE *HalDev);
-+  int  (*RxReturn)(HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
-+  int  (*Send)(HAL_DEVICE *HalDev,FRAGLIST *FragList,int FragCount,
-+                 int PacketSize,OS_SENDINFO *OsSendInfo,int Ch, int Queue,
-+                 bit32u Mode);
-+  int  (*StatsClear)(HAL_DEVICE *HalDev);
-+  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
-+  int  (*Status)(HAL_DEVICE *HalDev);
-+  void (*Tick)(HAL_DEVICE *HalDev);
-+  int  (*Kick)(HAL_DEVICE *HalDev, int Queue);
-+  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+  } AAL5_FUNCTIONS;
-+*/
-+
-+int cpaal5InitModule(HAL_DEVICE **HalDev,
-+                 OS_DEVICE *OsDev,
-+                 HAL_FUNCTIONS **HalFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+/**
-+ *  @ingroup shared_data
-+ *  The AAL2_FUNCTIONS struct defines the AAL2 function pointers used by upper layer
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to cphalInitModule().
-+ */
-+typedef struct
-+  {
-+  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
-+  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
-+  int  (*Init)(HAL_DEVICE *HalDev);
-+  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
-+  int  (*Open)(HAL_DEVICE *HalDev);
-+  int  (*OptionsGet)(HAL_DEVICE *HalDev, char *Key, bit32u *Value);
-+  int  (*Probe)(HAL_DEVICE *HalDev);
-+
-+  int  (*StatsClear)(HAL_DEVICE *HalDev);
-+  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
-+  int  (*Status)(HAL_DEVICE *HalDev);
-+  void (*Tick)(HAL_DEVICE *HalDev);
-+  int  (*Aal2UuiMappingSetup)(HAL_DEVICE *HalDev, int VC, int UUI,
-+                                    int VdmaCh, int UUIDiscard);
-+  int  (*Aal2RxMappingSetup)(HAL_DEVICE *HalDev, int VC, int CID,
-+                                   int LC);
-+  int  (*Aal2TxMappingSetup)(HAL_DEVICE *HalDev, int VC, int LC, int VdmaCh);
-+  int  (*Aal2VdmaChSetup)(HAL_DEVICE *HalDev, bit32u RemVdmaVtAddr,
-+                               VdmaChInfo *VdmaCh);
-+  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+  int  (*Aal2ModeChange)(HAL_DEVICE *HalDev, int Vc, int RxCrossMode,
-+                           int RxMultiMode, int TxMultiMode, int SchedMode,
-+                           int TcCh);
-+  void (*Aal2VdmaEnable)(HAL_DEVICE *HalDev, int Ch);
-+  int  (*Aal2VdmaDisable)(HAL_DEVICE *HalDev, int Ch);
-+  } AAL2_FUNCTIONS;
-+
-+int cpaal2InitModule(HAL_DEVICE **HalDev,
-+                 OS_DEVICE *OsDev,
-+                 AAL2_FUNCTIONS **HalFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+#endif
-+
-+#ifdef _CPHAL_VDMAVT
-+/**
-+ *  @ingroup shared_data
-+ *  The VDMA_FUNCTIONS struct defines the HAL function pointers used by upper layer
-+ *  software.  The upper layer software receives these pointers through the
-+ *  call to InitModule().
-+ *
-+ *  Note that this list is still under definition.
-+ */
-+typedef struct
-+  {
-+  bit32  (*Init)( HAL_DEVICE *VdmaVtDev);
-+    /*  bit32  (*SetupTxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
-+                  bit32u Addr, bit32u Size, bit32u PollInt);
-+    bit32  (*SetupRxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
-+                  bit32u Addr, bit32u Size, bit32u PollInt); */
-+  bit32  (*Tx)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*Rx)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*SetRemoteChannel)(HAL_DEVICE *VdmaVtDev, bit32u RemAddr,
-+                         bit32u RemDevID);
-+  bit32  (*ClearRxInt)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*ClearTxInt)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*Open)(HAL_DEVICE *VdmaVtDev);
-+  bit32  (*Close)(HAL_DEVICE *VdmaVtDev);
-+  int    (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
-+  int    (*ChannelSetup)(HAL_DEVICE *VdmaVtDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+  int    (*ChannelTeardown)(HAL_DEVICE *VdmaVtDev, int Ch, int Mode);
-+  int    (*Send)(HAL_DEVICE *VdmaVtDev,FRAGLIST *FragList,int FragCount,
-+                 int PacketSize,OS_SENDINFO *OsSendInfo,bit32u Mode);
-+  } VDMA_FUNCTIONS;
-+
-+int VdmaInitModule(HAL_DEVICE **VdmaVt,
-+                 OS_DEVICE *OsDev,
-+                 VDMA_FUNCTIONS **VdmaVtFunc,
-+                 OS_FUNCTIONS *OsFunc,
-+                 int OsFuncSize,
-+                 int *HalFuncSize,
-+                 int Inst);
-+#endif
-+
-+/*
-+extern int cphalInitModule(MODULE_TYPE ModuleType, HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc,
-+                      int (*osInitModule)(OS_FUNCTIONS *), void* (*osMallocDev)(bit32u),
-+                      int *Size, int Inst);
-+*/
-+
-+
-+#ifdef _CPHAL_AAL5
-+extern const char hcSarFrequency[];
-+#endif
-+
-+#ifdef _CPHAL_CPMAC
-+/* following will be common, once 'utl' added */
-+extern const char hcClear[];
-+extern const char hcGet[];
-+extern const char hcSet[];
-+extern const char hcTick[];
-+
-+extern const char hcCpuFrequency[];
-+extern const char hcCpmacFrequency[];
-+extern const char hcMdioBusFrequency[];
-+extern const char hcMdioClockFrequency[];
-+extern const char hcCpmacBase[];
-+extern const char hcPhyNum[];
-+extern const char hcSize[];
-+extern const char hcCpmacSize[];
-+extern const char hcPhyAccess[];
-+#endif
-+
-+#endif  /*  end of _INC_    */
-diff -urN linux.old/drivers/atm/sangam_atm/dev_host_interface.h linux.dev/drivers/atm/sangam_atm/dev_host_interface.h
---- linux.old/drivers/atm/sangam_atm/dev_host_interface.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dev_host_interface.h	2005-08-23 04:46:50.091844608 +0200
-@@ -0,0 +1,1162 @@
-+#ifndef __DEV_HOST_INTERFACE_H__
-+#define __DEV_HOST_INTERFACE_H__ 1
-+
-+/*******************************************************************************
-+*  FILE PURPOSE: Public header file for the Host-to-DSP interface
-+********************************************************************************
-+*
-+*  TEXAS INSTRUMENTS PROPRIETARTY INFORMATION
-+*
-+*  (C) Copyright Texas Instruments Inc. 2002.  All rights reserved.
-+*
-+*  Property of Texas Instruments Incorporated
-+*
-+*  Restricted Rights - Use, duplication, or disclosure is subject to
-+*  restrictions set forth in TI's program license agreement and
-+*  associated documentation
-+*
-+*
-+*  FILE NAME: dev_host_interface.h
-+*
-+*  DESCRIPTION:
-+*       This header file defines the variables and parameters used between the
-+*       host processor and the DSP.  This file is included in both the DSP
-+*       software and the host software.
-+*
-+*  RULES FOR MODIFICATION AND USE OF THIS FILE:
-+*
-+*  --The main pointer to the struct of pointers will always be at the same fixed
-+*      location (0x80000000).
-+*
-+*  --Each pointer element in the struct of pointers (indicated by the main pointer)
-+*      will always point to a struct only.
-+*
-+*  --Any new structures added to the host interface in subsequent versions must
-+*      each have a corresponding new pointer element added to the END of the struct
-+*      of pointers.  Other than this, there will never be any moving or rearranging
-+*      of the pointer elements in the struct of pointers.
-+*
-+*  --Any new elements added to existing structures will be added at the END of the
-+*      structure.  Other than this, there will never be any moving or rearranging
-+*      of structure elements.
-+*
-+*  --A new structure will never be added as a new element in an old structure.
-+*      New structures must be added separately with a new entry in the struct of
-+*      pointers, as noted above.
-+*
-+*  --Also, the sizes of existing arrays within old structures will never be changed.
-+*
-+*  --The modem code in the DSP will never reference the struct of pointers in order
-+*      to avoid aliasing issues in the DSP code.  The modem code will only use the
-+*      specific structures directly.
-+*
-+*  --The host processor never accesses the DSP side of the ATM-TC hardware directly.
-+*      The DSP interfaces directly to the ATM-TC hardware and relays information to
-+*      the host processor through the host interface.
-+*
-+*  --The host processor can track the modem's transition through important states
-+*      by accessing the Modem State Bit Field in the host interface.  Each bit in
-+*      the bit field represents an important state to track in the modem.  As the
-+*      modem transitions through each important state, the corresponding bit will
-+*      change from a zero to a one.  Each bit in the bit field will only be reset to
-+*      zero if the modem retrains.  If new states need to be tracked and are added
-+*      in subsequent versions of the host interface, a corresponding bit will be
-+*      added at the END of the bit field to ensure backwards compatibility.  The
-+*      Modem State Bit Field is reset if the modem retrains or falls out of Showtime.
-+*
-+*  --An interrupt will be sent to the host processor when a change occurs in the
-+*      Modem State Bit Field.  There is an interrupt masking register which can mask
-+*      specific interrupts corresponding to the bits of the Modem State Bit Field.
-+*      This allows the host to keep an interrupt from being generated for those
-+*      states that are masked.
-+*
-+*  HISTORY:
-+*
-+*  11/20/02  J. Bergsagel    Written from the previous host interface file
-+*  11/27/02  J. Bergsagel    Added comments for mailbox control struct and
-+*                              fixed a couple items for overlay page stuff.
-+*                            Also, added temporary elements for SWTC code.
-+*  12/04/02  J. Bergsagel    Added extra dummy byte to DEV_HOST_eocVarDef_t
-+*                              for proper word alignment.
-+*  12/12/02  J. Bergsagel    Changed initial states in the modem state bit field
-+*                              and added more instructions for adding more states.
-+*  12/16/02  J. Bergsagel    Changed name "hostVersion_p" to "hostIntfcVersion_p".
-+*                            Removed dspAturState from DEV_HOST_modemStateBitField_t.
-+*                            Reorganized several struct elements to clean up the
-+*                              host interface.
-+*  12/27/02  Sameer V        Added missing channel 0 statistics for TC. Added
-+*                            ocd error information.
-+*  12/27/02  Sameer V        Added overlayState to OlayDP_Parms to indicate whether
-+*                              overlays are being executed in current state.
-+*  01/06/03  J. Bergsagel    Added maxAllowedMargin and minRequiredMargin to
-+*                              DEV_HOST_msg_t.
-+*                            Renamed TC chan 1 items to be chan 0 items to start out.
-+*  01/17/03  Sameer V        Moved delineationState to atmStats structure.
-+*  01/21/03  Barnett         Implemented Ax7 UNIT-MODULE modular software framework.
-+*  01/22/03  J. Bergsagel    Added warning comments for certain struct typedefs.
-+*  01/23/03  C. Perez-N.     Removed old AX5-only diags. command/response entries in the
-+*                            HOST and DSP ennumerations, and added the AX7 new ones
-+*                            Added pointer entries in the DEV_HOST_dspOamSharedInterface_t
-+*                            structure pointing to the analog diags. input/output/options
-+*                            structures.
-+*  01/29/03  Sameer V        Removed TC_IDLE in enum for delineation state. Hardware
-+*                            only reports TC_HUNT, TC_PRESYNC and TC_SYNC.
-+*  03/07/03  Sameer/Jonathan Put SWTC token around structs and elements only used by SWTC
-+*  03/12/03  Mannering       Add CO profile data structures
-+*  03/18/03  J. Bergsagel    Removed the obsolete DSP_CHECK_TC response message.
-+*  03/24/03  J. Bergsagel    Added DEV_HOST_hostInterruptMask_t for masking DSP interrupt sources
-+*  03/28/03  C. Perez-N      Changed the C-style comments and made them C++ sytle instead.
-+*                            Replaced the occurrences of "SINT32 *" pointer declarations with
-+*                            "PSINT32"
-+*  03/28/03  Mannering       Update CO profile data structures
-+*  04/04/03  S. Yim          Add host I/F hooks for switchable hybrid and RJ11
-+*                              inner/outer pair selection
-+*  04/11/03  J. Bergsagel    Changed modem state bit field struct types to enums instead and used
-+*                            a single integer variable for each "bitfield".
-+*                            Changed bit field for host interrupt masks to an integer value also.
-+*  04/14/03  J. Bergsagel    Changed name of table pointer "meanSquareTblDstrm_p" to "marginTblDstrm_p".
-+*  04/03/03  Umesh Iyer      CMsg1 and RMsg1 use the same storage as CMSGPCB and RMSGPCB.
-+*                            The string lengths for these have been adjusted to hold the longest
-+*                            message in each case. The PCB messages from ADSL2 are longer.
-+*  04/21/03  Sameeer V       Added new host mailbox message for shutting down the DSLSS peripherals.
-+*  04/23/03  J. Bergsagel    Fixed comments for overlay mailbox messages and for losErrors.
-+*  04/28/03  Mannering       Added skip phase op flag to  CO profile data structure
-+*  05/05/03  Mannering       Review Comments - Removed "#if CO_PROFILE" from around structure
-+*                            definitions and define the number of profiles (DEV_HOST_LIST_ENTRIES)
-+*  05/13/03  J. Bergsagel    Added new elements to DEV_HOST_phyPerf_t for host control of hybrid.
-+*  05/15/03  J. Bergsagel    Added "farEndLosErrors" and "farEndRdiErrors" to DEV_HOST_modemStatsDef_t.
-+*  05/16/03  Mannering       Updated CO profile structure to support updated bit allocation and
-+*                            interopability.
-+*  05/20/03  Sameer V        Added DSP message to inicate DYING GASP.
-+*  05/22/03  J. Bergsagel    Added a new struct typedef "DEV_HOST_hostInterruptSource_t".
-+*                            Added "atucGhsRevisionNum" to "DEV_HOST_dspWrNegoParaDef_t".
-+*                            Moved the following struct typedef's here to the public host interface:
-+*                              DEV_HOST_dspBitSwapDef_t
-+*                              DEV_HOST_atmDsBert_t
-+*  05/28/03  A. Redfern      Changed pointer type and location for margin reporting.
-+*  05/28/03  Mannering       Moved CO profile defines to dev_host_interface_pvt.h
-+*  05/28/03  J. Bergsagel    Moved subStateIndex and STM BERT controls into new struct "DEV_HOST_modemEnvPublic_t"
-+*  05/29/03  J. Bergsagel    Added elements to "DEV_HOST_modemEnvPublic_t" for host control of DSLSS LED's.
-+*  06/10/03  Umesh Iyer      Modified trainMode check to be compliant with the new host i/f mods.
-+*  06/05/03  J. Bergsagel    Added enum that will eventually replace the bitfield: DEV_HOST_diagAnlgOptionsVar_t.
-+*                            Added new element "currentHybridNumUsed" in the DEV_HOST_phyPerf_t typedef
-+*                            Added new host control flags for LPR signal detection on GPIO[0].
-+*  06/06/03  A. Redfern      Removed fine gain scale from the CO profile and added max downstream power cutback.
-+*                            Changed "test1" in CO profile struct to "phyEcDelayAdjustment".
-+*  06/26/03  J. Bergsagel    Added genericStructure typedef and two pointer elements of this type in the big table.
-+*  07/03/03  Jack Huang      Renamed test2 to bSwapThresholdUpdate
-+*  07/07/03  Mallesh         Changed phySigTxPowerCutback_f flag to a variable phySigTxGainReductionAt0kft which indicates the
-+*                            amount of gain reduction in linear scale.
-+*  07/15/03  Sameer V        Changed DEV_HOST_diagAnlgOptionsVar_t to be an enum instead of a bit field. Host code
-+*                            does not support setting bit fields.
-+*  07/22/03  Jack Huang      Added bitswap control flag in host i/f for API calls
-+*  08/06/03  Sameer V        Added missingToneDs_p to the DEV_HOST_oamWrNegoParaDef_t to enable host to switch off
-+*                            DS tones on specified bins
-+*  08/21/03  Jack Huang      Added pcbEnabled flag in the DEV_HOST_modemEnvPublic_t structure
-+*                            Added g.hs buffer definitions to DEV_HOST_dspOamSharedInterface_t
-+*                            Added DEV_HOST_consBufDef_t to the DEV_HOST_dspOamSharedInterface_t structure
-+*  08/26/03  J. Bergsagel    Fixed name of "missingToneDs_p" to be "missingToneDsAddr" instead (since it is
-+*                            not really used as a pointer).
-+*  09/11/03  Mallesh         Added a flag "usPilotInT1413ModeInMedley" to determine the need to send Upstream Pilot
-+*                            in medley in T1.413 mode.
-+*  09/12/03  J. Bergsagel    Changed "test3" to "phyBitaFastPathExcessFineGainBump" in CO profile struct.
-+*                            Changed "test4" to "phyBitaSkipGapAdjustment" in CO profile struct.
-+*  09/23/03  J. Bergsagel    Changed "T1413vendorRevisionNumber" to "vendorRevisionNumber" in DEV_HOST_msg_t.
-+*                            Added ADSL2 and ADSL2 diag. states to the modem state bit field.
-+*  10/01/03  J. Bergsagel    Changed define of "MULTI_MODE" to be 255 to indicate that all possible bits
-+*                            in the 8-bit bit field are turned on for any current and future training modes.
-+*  10/09/03  M. Turkboylari  Added DSP_TRAINING_MSGS and adsl2DeltMsgs_p, which is a pointer to a pointer,
-+*                            in order to pass the ADSL2 training and DELT messages to the host side. This is for ACT.
-+*  10/20/03  Mallesh         Added a GHS state enumerator for cleardown
-+*  10/20/03  Xiaohui Li      Add definition for READSL2_MODE and READSL2_DELT
-+*  11/07/03  J. Bergsagel    Removed all code for when SWTC==1, which therefore allows removal of include of
-+*                            "env_def_defines.h".  We shouldn't have any compile tokens used in this file.
-+*                            (the SWTC token is always off in any Ax7 code).
-+*  11/14/03  J. Bergsagel    Also removed READSL2_ENABLE token (no more compile tokens to be used in this .h file).
-+*  12/12/03  Sameer/Ram      Added DEV_HOST_EOCAOC_INTERRUPT_MASK to enable host to disable response code for AOC/EOC 
-+*                            mailbox messages
-+*  12/09/03  Jack Huang      Changed G.hs txbuf size from 60 to 64 to fit the max segment size 
-+*  12/15/03  Mallesh         Changed vendor ID type defenition from SINT16 to UINT16
-+*  12/23/03  Sameer V        Added ability to turn off constellation display reporting to host using oamFeature bit field.
-+*  12/24/03  Sameer V        Changed comment for Constellation Display Current Address to Host Write instead of DSP Write.
-+*  12/26/03  Sameer/Ram      Added DEV_HOST_GHSMSG_INTERRUPT_MASK to enable host to disable response code for GHS Messages 
-+*  (C) Copyright Texas Instruments Inc. 2002.  All rights reserved.
-+*******************************************************************************/
-+
-+#include "dev_host_verdef.h"
-+
-+// ---------------------------------------------------------------------------------
-+// Address of the pointer to the DEV_HOST_dspOamSharedInterface_s struct of pointers
-+// This is where it all starts.
-+// ---------------------------------------------------------------------------------
-+#define DEV_HOST_DSP_OAM_POINTER_LOCATION 0x80000000
-+
-+// The define "MAX_NUM_UPBINS" is used in "DEV_HOST_diagAnlgInputVar_t" below.
-+// This value can never be changed (for host intf. backwards compatibility)
-+#define MAX_NUM_UPBINS 64
-+
-+// -----------------------------------------------
-+// Begin common enumerations between DSP and host.
-+// -----------------------------------------------
-+
-+// These Host-to-DSP commands are organized into two groups:
-+// immediate state change commands and status affecting commands.
-+// Do not add or remove commands except at the bottom since the DSP assumes this sequence.
-+
-+enum
-+{
-+  HOST_ACTREQ,         // Send R-ACKREQ and monitor for C-ACKx
-+  HOST_QUIET,          // Sit quietly doing nothing for about 60 seconds, DEFAULT STATE; R_IDLE
-+  HOST_XMITBITSWAP,    // Perform upstream bitswap - FOR INTERNAL USE ONLY
-+  HOST_RCVBITSWAP,     // Perform downstream bitswap - FOR INTERNAL USE ONLY
-+  HOST_RTDLPKT,        // Send a remote download packet - FOR INTERNAL USE ONLY
-+  HOST_CHANGELED,      // Read the LED settings and change accordingly
-+  HOST_IDLE,           // Sit quiet
-+  HOST_REVERBTEST,     // Generate REVERB for manufacturing test
-+  HOST_CAGCTEST,       // Set coarse receive gain for manufacturing test
-+  HOST_DGASP,          // send Dying Gasp messages through EOC channel
-+  HOST_GHSREQ,         // G.hs - FOR INTERNAL USE ONLY
-+  HOST_GHSMSG,         // G.hs - FOR INTERNAL USE ONLY
-+  HOST_GHS_SENDGALF,   // G.hs - FOR INTERNAL USE ONLY
-+  HOST_GHSEXIT,        // G.hs - FOR INTERNAL USE ONLY
-+  HOST_GHSMSG1,        // G.hs - FOR INTERNAL USE ONLY
-+  HOST_HYBRID,         // Enable/Disable automatic hybrid switch
-+  HOST_RJ11SELECT,     // RJ11 inner/outer pair select
-+  HOST_DIGITAL_MEM,    // Digital Diags: run external memory tests
-+  HOST_TXREVERB,       // AFE Diags: TX path Reverb
-+  HOST_TXMEDLEY,       // AFE Diags: TX path Medley
-+  HOST_RXNOISEPOWER,   // AFE Diags: RX noise power
-+  HOST_ECPOWER,        // AFE Diags: RX eco power
-+  HOST_ALL_ADIAG,      // AFE Diags: all major analog diagnostic modes. Host is responsible to initiate each diagnostic sessions
-+  HOST_USER_ADIAG,     // AFE Diags: Host fills in analog diagnostic input data structure as specified and requests DSP to perform measurements as specified
-+  HOST_QUIT_ADIAG,     // AFE Diags: Host requests DSP to quit current diagnostic session. This is used for stopping the transmit REVERB/MEDLEY
-+  HOST_NO_CMD,         // All others - G.hs - FOR INTERNAL USE ONLY
-+  HOST_DSLSS_SHUTDOWN, // Host initiated DSLSS shutdown message
-+  HOST_SET_GENERIC,    // Set generic CO profile
-+  HOST_UNDO_GENERIC,   // Set profile previous to Generic
-+  HOST_GHS_CLEARDOWN   // G.hs - FOR INTERNAL USE ONLY to start cleardown
-+};
-+
-+// These DSP-to-Host responses are organized into two groups:
-+// responses to commands and requests for OAM services.
-+
-+enum
-+{
-+  DSP_IDLE,               // R_IDLE state entered
-+  DSP_ACTMON,             // R_ACTMON state entered
-+  DSP_TRAIN,              // R_TRAIN state entered
-+  DSP_ACTIVE,             // R_ACTIVE state entered
-+  DSP_XMITBITSWAP,        // Upstream bitswap complete - FOR INTERNAL USE ONLY
-+  DSP_RCVBITSWAP,         // Downstream bitswap complete - FOR INTERNAL USE ONLY
-+  DSP_RTDL,               // R_RTDL state entered - FOR INTERNAL USE ONLY
-+  DSP_RRTDLPKT,           // RTDL packet received - FOR INTERNAL USE ONLY
-+  DSP_XRTDLPKT,           // RTDL packet transmitted - FOR INTERNAL USE ONLY
-+  DSP_ERROR,              // Command rejected, wrong state for this command
-+  DSP_REVERBTEST,         // Manufacturing REVERB test mode entered
-+  DSP_CAGCTEST,           // Manufacturing receive gain test done
-+  DSP_OVERLAY_START,      // Notify host that page overlay has started - overlay number indicated by "tag"
-+  DSP_OVERLAY_END,        // Notify host that page overlay has ended   - overlay number indicated by "tag"
-+  DSP_CRATES1,            // CRATES1 message is valid and should be copied to host memory now
-+  DSP_SNR,                // SNR calculations are ready and should be copied to host memory now
-+  DSP_GHSMSG,             // G.hs - FOR INTERNAL USE ONLY
-+  DSP_RCVBITSWAP_TIMEOUT, // Acknowledge Message was not received within ~500 msec (26 Superframes).
-+  DSP_ATM_TC_SYNC,        // Indicates true TC sync on both the upstream and downstream. Phy layer ready for data xfer.
-+  DSP_ATM_NO_TC_SYNC,     // Indicates loss of sync on phy layer on either US or DS.
-+  DSP_HYBRID,             // DSP completed hybrid switch
-+  DSP_RJ11SELECT,         // DSP completed RJ11 inner/outer pair select
-+  DSP_INVALID_CMD,        // Manufacturing (Digital and AFE) diags: CMD received not recognized
-+  DSP_TEST_PASSED,        // Manufacturing diags: test passed
-+  DSP_TEST_FAILED,        // Manufacturing diags: test failed
-+  DSP_TXREVERB,           // Manufacturing AFE diags: Response to HOST_TXREVERB
-+  DSP_TXMEDLEY,           // Manufacturing AFE diags: Response to HOST_TXMEDLEY
-+  DSP_RXNOISEPOWER,       // Manufacturing AFE diags: Response to HOST_RXNOISEPOWER
-+  DSP_ECPOWER,            // Manufacturing AFE diags: Response to HOST_ECPOWER
-+  DSP_ALL_ADIAG,          // Manufacturing AFE diags: Response to HOST_ALL_ADIAG
-+  DSP_USER_ADIAG,         // Manufacturing AFE diags: Response to HOST_USER_ADIAG
-+  DSP_QUIT_ADIAG,         // Manufacturing AFE diags: Response to HOST_QUIT_ADIAG
-+  DSP_DGASP,              // DSP Message to indicate dying gasp
-+  DSP_EOC,                // DSP Message to indicate that DSP sent an EOC message to CO
-+  DSP_TRAINING_MSGS       // DSP Message to indicate that host has to copy the training message specified in the tag field.
-+};
-+
-+// Define different ADSL training modes.
-+//Defintions as per new host interface.
-+#define NO_MODE             0
-+#define GDMT_MODE           2
-+#define GLITE_MODE          4
-+#define ADSL2_MODE          8
-+#define ADSL2_DELT          (ADSL2_MODE+1)
-+#define ADSL2PLUS_MODE      16
-+#define ADSL2PLUS_DELT      (ADSL2PLUS_MODE+1)
-+#define READSL2_MODE        32
-+#define READSL2_DELT        (READSL2_MODE+1)
-+#define T1413_MODE          128
-+#define MULTI_MODE          255 // all possible bits are set in the bit field
-+
-+// Define the reason for dropping the connection
-+
-+enum
-+{
-+  REASON_LOS         = 0x01,
-+  REASON_DYING_GASP  = 0x02,
-+  REASON_USCRCERR    = 0x04,
-+  REASON_MARGIN_DROP = 0x08
-+};
-+
-+
-+// ----------------------------------------------------
-+// Begin modem state bit field definitions - DSP write.
-+// ----------------------------------------------------
-+
-+// BitField1 for initial states and G.hs states.
-+// If more values need to be added, they will be added at the end (up to 32 total entries).  However, if this causes
-+// the state transitions to tick off out of normal bit order, then the C code will have to be re-written
-+// that causes the proper values to be entered into the modem state bit fields.
-+typedef enum
-+{
-+  ZERO_STATE1 = 0,
-+  RTEST       = 0x1,
-+  RIDLE       = 0x2,
-+  RINIT       = 0x4,
-+  RRESET      = 0x8,
-+  GNSFLR      = 0x10,
-+  GTONE       = 0x20,
-+  GSILENT     = 0x40,
-+  GNEGO       = 0x80,
-+  GFAIL       = 0x100,
-+  GACKX       = 0x200,
-+  GQUIET2     = 0x400
-+} DEV_HOST_stateBitField1_t; // this enum should only have 32 bit entries in it.  Add another enum if you need more.
-+
-+// BitField2 for T1.413 states and for the rest of the modem states (so far)
-+// If more values need to be added, they will be added at the end (up to 32 total entries).  However, if this causes
-+// the state transitions to tick off out of normal bit order, then the C code will have to be re-written
-+// that causes the proper values to be entered into the modem state bit fields.
-+typedef enum
-+{
-+  ZERO_STATE2 = 0,
-+  TNSFLR      = 0x1,
-+  TACTREQ     = 0x2,
-+  TACTMON     = 0x4,
-+  TFAIL       = 0x8,
-+  TACKX       = 0x10,
-+  TQUIET2     = 0x20,
-+  RQUIET2     = 0x40,
-+  RREVERB1    = 0x80,
-+  RQUIET3     = 0x100,
-+  RECT        = 0x200,
-+  RREVERB2    = 0x400,
-+  RSEGUE1     = 0x800,
-+  RREVERB3    = 0x1000,
-+  RSEGUE2     = 0x2000,
-+  RRATES1     = 0x4000,
-+  RMSGS1      = 0x8000,
-+  RMEDLEY     = 0x10000,
-+  RREVERB4    = 0x20000,
-+  RSEGUE3     = 0x40000,
-+  RMSGSRA     = 0x80000,
-+  RRATESRA    = 0x100000,
-+  RREVERBRA   = 0x200000,
-+  RSEGUERA    = 0x400000,
-+  RMSGS2      = 0x800000,
-+  RRATES2     = 0x1000000,
-+  RREVERB5    = 0x2000000,
-+  RSEGUE4     = 0x4000000,
-+  RBNG        = 0x8000000,
-+  RREVERB6    = 0x10000000,
-+  RSHOWTIME   = 0x20000000
-+} DEV_HOST_stateBitField2_t;  // this enum should only have 32 bit entries in it.  Add another enum if you need more.
-+
-+// BitField3 for ADSL2 states
-+// If more values need to be added, they will be added at the end (up to 32 total entries).  However, if this causes
-+// the state transitions to tick off out of normal bit order, then the C code will have to be re-written
-+// that causes the proper values to be entered into the modem state bit fields.
-+typedef enum
-+{
-+  ZERO_STATE3 = 0,
-+  G2QUIET1    = 0x1,
-+  G2COMB1     = 0x2,
-+  G2QUIET2    = 0x4,
-+  G2COMB2     = 0x8,
-+  G2ICOMB1    = 0x10,
-+  G2LINEPROBE = 0x20,
-+  G2QUIET3    = 0x40,
-+  G2COMB3     = 0x80,
-+  G2ICOMB2    = 0x100,
-+  G2RMSGFMT   = 0x200,
-+  G2RMSGPCB   = 0x400,
-+  G2REVERB1   = 0x800,
-+  G2QUIET4    = 0x1000,
-+  G2REVERB2   = 0x2000,
-+  G2QUIET5    = 0x4000,
-+  G2REVERB3   = 0x8000,
-+  G2ECT       = 0x10000,
-+  G2REVERB4   = 0x20000,
-+  G2SEGUE1    = 0x40000,
-+  G2REVERB5   = 0x80000,
-+  G2SEGUE2    = 0x100000,
-+  G2RMSG1     = 0x200000,
-+  G2MEDLEY    = 0x400000,
-+  G2EXCHANGE  = 0x800000,
-+  G2RMSG2     = 0x1000000,
-+  G2REVERB6   = 0x2000000,
-+  G2SEGUE3    = 0x4000000,
-+  G2RPARAMS   = 0x8000000,
-+  G2REVERB7   = 0x10000000,
-+  G2SEGUE4    = 0x20000000
-+} DEV_HOST_stateBitField3_t;  // this enum should only have 32 bit entries in it.  Add another enum if you need more.
-+
-+// BitField4 for ADSL2 diag. states
-+// If more values need to be added, they will be added at the end (up to 32 total entries).  However, if this causes
-+// the state transitions to tick off out of normal bit order, then the C code will have to be re-written
-+// that causes the proper values to be entered into the modem state bit fields.
-+typedef enum
-+{
-+  ZERO_STATE4 = 0,
-+  GDSEGUE1    = 0x1,
-+  GDREVERB5   = 0x2,
-+  GDSEGUE2    = 0x4,
-+  GDEXCHANGE  = 0x8,
-+  GDSEGUELD   = 0x10,
-+  GDRMSGLD    = 0x20,
-+  GDQUIET1LD  = 0x40,
-+  GDQUIET2LD  = 0x80,
-+  GDRACK1     = 0x100,
-+  GDRNACK1    = 0x200,
-+  GDQUIETLAST = 0x400
-+} DEV_HOST_stateBitField4_t;  // this enum should only have 32 bit entries in it.  Add another enum if you need more.
-+
-+// This struct collects all of the bitfield types listed above for the modem state bit field(s)
-+typedef struct
-+{
-+  DEV_HOST_stateBitField1_t bitField1; // this is the first modem state bit field (mostly init. and G.hs)
-+  DEV_HOST_stateBitField2_t bitField2; // this is the second modem state bit field (T1.413 and G.dmt)
-+  DEV_HOST_stateBitField3_t bitField3; // this is the third modem state bit field (ADSL2)
-+  DEV_HOST_stateBitField4_t bitField4; // this is the fourth modem state bit field (ADSL2 diag.)
-+} DEV_HOST_modemStateBitField_t;
-+
-+
-+// -----------------------------------------------
-+// Begin NegoPara message definitions - DSP write.
-+// -----------------------------------------------
-+
-+typedef struct
-+{
-+  UINT8  trainMode;          // Train mode selected.  See training modes defined above.
-+  UINT8  bDummy1;            // dummy byte for explicit 32-bit alignment
-+  UINT16 lineLength;         // Contains loop length estimate.  Accuracy w/i 500 ft.  LSbit = 1 for straight loop, = 0 for bridge tap
-+  UINT32 atucVendorId;       // Pass the vendor id of the CO to the host
-+  UINT8  cMsgs1[8];          // CMsgs1 and CMSGPCB
-+  UINT16 adsl2DSRate;        //
-+  UINT8  cRates2;            //
-+  UINT8  rRates2;            //
-+  UINT8  rRates1[4][11];     //
-+  UINT8  cMsgs2[4];          //
-+  UINT8  cRates1[4][30];     //
-+  UINT8  rMsgs2[4];          //
-+  UINT16 adsl2USRate;        //
-+  UINT8  atucGhsRevisionNum; // Pass the G.hs Revision number of the CO to the host
-+  UINT8  reserved1;          //
-+  PUINT8 *adsl2DeltMsgs_p;   // This pointer to a pointer passes the address of the globalvar.pString, which is also
-+                             // a pointer list of pointers. It will be used to pass all the new ADSL2 DELT messages to
-+                             // host side. This is for ACT.
-+} DEV_HOST_dspWrNegoParaDef_t;
-+
-+
-+// ----------------------------------------------------
-+// Begin OAM NegoPara message definitions - Host write.
-+// ----------------------------------------------------
-+
-+// OAM Feature bit fields.
-+//
-+// Bit    0 - Enable auto retrain of modem
-+// Bit    1 - Detect and report TC sync to host
-+// Bit 2-31 - Reserved
-+
-+#define DEV_HOST_AUTORETRAIN_ON       0x00000001
-+#define DEV_HOST_TC_SYNC_DETECT_ON    0x00000002
-+
-+#define DEV_HOST_AUTORETRAIN_MASK       0x00000001
-+#define DEV_HOST_TC_SYNC_DETECT_MASK    0x00000002
-+#define DEV_HOST_EOCAOC_INTERRUPT_MASK  0x00000004
-+#define DEV_HOST_CONS_DISP_DISABLE_MASK 0x00000008
-+#define DEV_HOST_GHSMSG_INTERRUPT_MASK  0x00000010
-+
-+typedef struct
-+{
-+  UINT8   stdMode;              // Desired train mode.  See training modes defined above.
-+  UINT8   ghsSequence;          // Selected G.hs session as shown in Appendix 1
-+  UINT8   usPilotFlag;          // Value of 1 indicates transmit an upstream pilot on bin 16
-+  UINT8   bDummy1;              // dummy byte for 32-bit alignment
-+  UINT8   rMsgs1[38];           // RMSG-1(6) and RMSG_PCB (38)
-+  UINT8   bDummy2[2];           // dummy bytes for 32-bit alignment
-+  UINT32  oamFeature;           // 32 bit wide bit field to set OAM-specific features.
-+  SINT8   marginThreshold;      // Threshold for margin reporting
-+  UINT8   hostFixAgc;           // flag to force datapump to bypass AGC training and use the following values
-+  UINT8   hostFixEqualizer;     // forced analog equalizer value used during AGC training when hostfix_agc is on
-+  UINT8   hostFixPga1;          // forced pga1 value used during AGC training when hostFixAgc is on
-+  UINT8   hostFixPga2;          // forced pga2 value used during AGC training when hostFixAgc is on
-+  UINT8   hostFixPga3;          // forced pga3 value used during AGC training when hostFixAgc is on
-+  UINT8   marginMonitorShwtme;  // margin monitoring flag (during showtime)
-+  UINT8   marginMonitorTrning;  // margin monitoring flag (during training)
-+  UINT8   disableLosAlarm;      // flag to disable training based on los
-+  UINT8   usCrcRetrain;         // flag to disable retrain due to excessive USCRC
-+  UINT8   t1413VendorId[2];     // Vendor ID used for T1.413 trainings
-+  UINT8   gdmtVendorId[8];      // Vendor ID used for G.dmt trainings (ITU VendorID)
-+  UINT8   missingTones[64];     // 64 element array to define missing tones for TX_MEDLEY and TX REVERB tests
-+  UINT32  missingToneDsAddr;    // Address given to DSP for tones to be switched off in DS direction
-+  UINT8   dsToneTurnoff_f;      // This flag controls the DS tone turn off logic
-+  UINT8   reserved1;            // Dummy bytes
-+  UINT8   reserved2;            // Dummy bytes
-+  UINT8   reserved3;            // Dummy bytes
-+} DEV_HOST_oamWrNegoParaDef_t;
-+
-+
-+// ----------------------------------------
-+// Begin Rate-adaptive message definitions.
-+// ----------------------------------------
-+
-+// The four values below can never be changed (for host intf. backwards compatibility)
-+#define DEV_HOST_RMSGSRA_LENGTH  10
-+#define DEV_HOST_RRATESRA_LENGTH 1
-+#define DEV_HOST_CRATESRA_LENGTH 120
-+#define DEV_HOST_CMSGSRA_LENGTH  6
-+
-+typedef struct
-+{
-+  UINT8 rRatesRaString[DEV_HOST_RRATESRA_LENGTH+3];
-+  UINT8 rMsgsRaString[DEV_HOST_RMSGSRA_LENGTH+2];
-+  UINT8 cMsgsRaString[DEV_HOST_CMSGSRA_LENGTH+2];
-+} DEV_HOST_raMsgsDef_t;
-+
-+
-+// ----------------------------------------------
-+// Begin superframe cnts definitions - DSP write.
-+// ----------------------------------------------
-+
-+#define DEV_HOST_FRAMES_PER_SUPER   68
-+#define DEV_HOST_SUPERFRAMECNTDSTRM 0
-+#define DEV_HOST_SUPERFRAMECNTUSTRM 4
-+
-+// Although only the least significant 8 bits should be used as an
-+// unsigned char for computing the bitswap superframe number, a
-+// full 32 bit counter is provided here in order to have an
-+// accurate indicator of the length of time that the modem has
-+// been connected.  This counter will overflow after 2.35 years
-+// of connect time.
-+
-+typedef struct
-+{
-+  UINT32 wSuperFrameCntDstrm;
-+  UINT32 wSuperFrameCntUstrm;
-+} DEV_HOST_dspWrSuperFrameCntDef_t;
-+
-+
-+// --------------------------------
-+// Begin ATUR/ATUC msg definitions.
-+// --------------------------------
-+
-+// Grouping used by the DSP to simplify parameter passing.
-+// All of these are written by the DSP.
-+
-+typedef struct
-+{
-+  UINT16 vendorId;          // TI's vendor ID = 0x0004; Amati's vendor ID = 0x0006
-+  UINT8  versionNum;        // T1.413 issue number
-+  UINT8  rateAdapt;         // 0 = fix rate (Default); 1= adaptive rate
-+  UINT8  trellis;           // 0 = disable trellis(default); 1 = enable trellis
-+  UINT8  echoCancelling;    // 0 = disable echo cancelling; 1 = enable echo cancelling(default)
-+  UINT8  maxBits;           // value range: 0-15; default = 15
-+  UINT8  maxPsd;            //
-+  UINT8  actualPsd;         //
-+  UINT8  maxIntlvDepth;     // 0, 1, 2, or 3 for 64, 128, 256, or 512 max depth
-+  UINT8  framingMode;       // 0 for asynchronous, 1 for synchronous full overhead
-+                            // 2 for reduced overhead, 3 for merged reduced overhead DSP write.
-+  UINT8  maxFrameMode;      // maximum framing mode desired.  Nor 0 or 3.
-+  SINT16 targetMargin;      //
-+  SINT16 maxAllowedMargin;  //
-+  SINT16 minRequiredMargin; //
-+  SINT16 maxTotBits;        //
-+  UINT8  grossGain;         //
-+  UINT8  ntr;               // Enable/disable NTR support
-+  SINT16 loopAttn;          // Loop Attenuation
-+  UINT8  vendorRevisionNumber;  // Reported Vendor Revision Number
-+  UINT8  reserved1;         // for 32-bit alignment
-+  UINT8  reserved2;         // for 32-bit alignment
-+  UINT8  reserved3;         // for 32-bit alignment
-+} DEV_HOST_msg_t;
-+
-+
-+// --------------------------------------
-+// Begin bits and gains table definitions
-+// --------------------------------------
-+
-+typedef struct
-+{
-+  PUINT8  aturBng_p;            // pointer to ATU-R bits and gains table
-+  PUINT8  atucBng_p;            // pointer to ATU-C bits and gains table
-+  PUINT8  bitAllocTblDstrm_p;   // pointer to Downstream Bit Allocation table
-+  PUINT8  bitAllocTblUstrm_p;   // pointer to Upstream Bit Allocation table
-+  PSINT8  marginTblDstrm_p;     // pointer to Downstream Margin table
-+} DEV_HOST_dspWrSharedTables_t;
-+
-+
-+// ----------------------------------------
-+// Begin datapump code overlay definitions.
-+// ----------------------------------------
-+
-+#define DEV_HOST_PAGE_NUM 4   // number of overlay pages
-+
-+// Never access a struct of this typedef directly.  Always go through the DEV_HOST_olayDpDef_t struct
-+typedef struct
-+{
-+  UINT32 overlayHostAddr;     // source address in host memory
-+  UINT32 overlayXferCount;    // number of 32bit words to be transfered
-+  UINT32 overlayDspAddr;      // destination address in DSP's PMEM
-+} DEV_HOST_olayDpPageDef_t;
-+
-+
-+typedef struct
-+{
-+  UINT32 overlayStatus;                      // Status of current overlay to DSP PMEM
-+  UINT32 overlayNumber;                      // DSP PMEM overlay page number
-+  UINT32 overlayState;                       // Indicates whether current state is an overlay state
-+  DEV_HOST_olayDpPageDef_t *olayDpPage_p[DEV_HOST_PAGE_NUM]; // Def's for the Pages
-+} DEV_HOST_olayDpDef_t;
-+
-+
-+// -------------------------
-+// Begin ATM-TC definitions.
-+// -------------------------
-+
-+// TC cell states.
-+typedef enum
-+{
-+  TC_HUNT,
-+  TC_PRESYNC,
-+  TC_SYNC
-+} DEV_HOST_cellDelinState_t;
-+
-+
-+// --------------------------------------------
-+// Begin datapump error/statistics definitions.
-+// --------------------------------------------
-+
-+// Never access a struct of this typedef directly.  Always go through the DEV_HOST_modemStatsDef_t struct.
-+typedef struct
-+{
-+  UINT32 crcErrors;   // Num of CRC errored ADSL frames
-+  UINT32 fecErrors;   // Num of FEC errored (corrected) ADSL frames
-+  UINT32 ocdErrors;   // Out of Cell Delineation
-+  UINT32 ncdError;    // No Cell Delineation
-+  UINT32 lcdErrors;   // Loss of Cell Delineation (within the same connection)
-+  UINT32 hecErrors;   // Num of HEC errored ADSL frames
-+} DEV_HOST_errorStats_t;
-+
-+
-+typedef struct
-+{
-+  DEV_HOST_errorStats_t *usErrorStatsIntlv_p; // us error stats - interleave path
-+  DEV_HOST_errorStats_t *dsErrorStatsIntlv_p; // ds error stats - interleave path
-+  DEV_HOST_errorStats_t *usErrorStatsFast_p;  // us error stats - fast path
-+  DEV_HOST_errorStats_t *dsErrorStatsFast_p;  // ds error stats - fast path
-+  UINT32                losErrors;   // Num of ADSL frames where loss-of-signal
-+  UINT32                sefErrors;   // Num of severly errored ADSL frames - LOS > MAXBADSYNC ADSL frames
-+  UINT32                farEndLosErrors; // Number of reported LOS defects by the CO.
-+  UINT32                farEndRdiErrors; // Number of reported RDI defects by the CO.
-+} DEV_HOST_modemStatsDef_t;
-+
-+// Never access a struct of this typedef directly.  Always go through the DEV_HOST_atmStats_t struct.
-+typedef struct
-+{
-+  UINT32 goodCount;   // Upstream Good Cell Count
-+  UINT32 idleCount;   // Upstream Idle Cell Count
-+} DEV_HOST_usAtmStats_t;
-+
-+// Never access a struct of this typedef directly.  Always go through the DEV_HOST_atmStats_t struct.
-+typedef struct
-+{
-+  UINT32 goodCount;      // Downstream Good Cell Count
-+  UINT32 idleCount;      // Downstream Idle Cell Count
-+  UINT32 badHecCount;    // Downstream Bad Hec Cell Count
-+  UINT32 ovflwDropCount; // Downstream Overflow Dropped Cell Count
-+  DEV_HOST_cellDelinState_t delineationState; // Indicates current delineation state
-+} DEV_HOST_dsAtmStats_t;
-+
-+
-+typedef struct
-+{
-+  DEV_HOST_usAtmStats_t *us0_p; // US ATM stats for TC channel 0
-+  DEV_HOST_dsAtmStats_t *ds0_p; // DS ATM stats for TC channel 0
-+  DEV_HOST_usAtmStats_t *us1_p; // US ATM stats for TC channel 1
-+  DEV_HOST_dsAtmStats_t *ds1_p; // DS ATM stats for TC channel 1
-+} DEV_HOST_atmStats_t;
-+
-+
-+// ----------------------
-+// Begin EOC definitions.
-+// ----------------------
-+
-+// The two values below can never change (for backwards compatibility of host intf.)
-+#define DEV_HOST_EOCREG4LENGTH   32
-+#define DEV_HOST_EOCREG5LENGTH   32
-+
-+typedef struct
-+{
-+  UINT8        eocReg4[DEV_HOST_EOCREG4LENGTH];    // Host/Dsp Write, vendor specific EOC Register 4
-+  UINT8        eocReg5[DEV_HOST_EOCREG5LENGTH];    // Host/Dsp Write, vendor specific EOC Register 5
-+  UINT8        vendorId[8];               // Host write
-+  UINT8        revNumber[4];              // Host, ATU-R Revision Number
-+  UINT8        serialNumber[32];          // Host write
-+  UINT8        eocReg4Length;             // Host Write, valid length for EOC register 4
-+  UINT8        eocReg5Length;             // Host Write, valid length for EOC register 5
-+  UINT8        dummy[2];                  // dummy bytes for 32-bit alignment
-+  UINT32       eocModemStatusReg;         // Dsp Write, status bits to host
-+  UINT8        lineAtten;                 // Dsp Write, line attenuation in 0.5 db step
-+  SINT8        dsMargin;                  // DSP Write, measured DS margin
-+  UINT8        aturConfig[30];            // Dsp Write, also used by EOC for ATUR Configuration
-+} DEV_HOST_eocVarDef_t;
-+
-+typedef struct
-+{
-+  UINT16       endEocThresh;              // Host Write, end of Clear EOC stream threshold
-+  UINT16       dummy;                     // dummy value to fill gap
-+  UINT32       dropEocCount;              // Dsp Write, counter of dropped Clear EOC bytes
-+  UINT16       eocRxLength;               // Host/DSP write, number of valid Rx Clear EOC bytes
-+  UINT16       eocTxLength;               // Host/DSP write, number of valid Tx Clear EOC bytes
-+  UINT8        eocRxBuf[64];              // Dsp Write, Buffer for receiving Rx Clear EOC bytes
-+  UINT8        eocTxBuf[64];              // Host Write, Buffer for writing Tx Clear EOC bytes
-+} DEV_HOST_clearEocVarDef_t;
-+
-+
-+// -----------------------------------
-+// Begin CO profile Definitions.
-+// -----------------------------------
-+
-+/* struct size must be a word size            */
-+typedef struct
-+{
-+
-+  SINT16 devCodecRxdf4Coeff[12] ;             // (BOTH) IIR Coefficients
-+  SINT16 devCodecTxdf2aCoeff[64] ;            // (BOTH) FIR filter coefficients
-+  SINT16 devCodecTxdf2bCoeff[64] ;            // (BOTH) FIR filter coefficients
-+  SINT16 devCodecTxdf1Coeff[12] ;             // (BOTH) IIR filter coefficients
-+  UINT16 devCodecTxDf2aDen;                   // (BOTH) denominator for IIR filter
-+  UINT16 devCodecTxDf2bDen;                   // (BOTH) denominator for IIR filter
-+  SINT16 ctrlMsmSpecGain[32];                 // (BOTH)
-+
-+  SINT16 phyBitaRateNegIntNoTrellis ;         // (BOTH) value to set
-+  SINT16 phyBitaRateNegIntTrellis ;           // (BOTH) value to set
-+  SINT16 phyBitaRateNegFastNoTrellis ;        // (BOTH) value to set
-+  SINT16 phyBitaRateNegFastTrellis ;          // (BOTH) value to set
-+  SINT16 phyBitaRsFlag ;                      // (BOTH)
-+  SINT16 phyBitaFirstSubChannel ;             // (BOTH)
-+  SINT16 phyBitaMaxFineGainBump;              // max fine gain bump
-+  SINT16 phyBitaFineGainReduction;            // fine gain reduction
-+  SINT16 phyBitaMaxDownstreamPowerCutback;    // max downstream power cutback
-+
-+  SINT16 phySigTxGainReductionAt0kft;         // upstream power reduction at 0 kft.
-+
-+  SINT16 phyAgcPgaTarget ;                    // (BOTH) compare value
-+
-+  UINT16 imsg413TxRate ;                      // (BOTH) Tx rate
-+  SINT16 imsg413RsBytesAdjust ;               // (BOTH) subtract value
-+  UINT16 imsg413PstringMask ;                 // (POTS) Or'ed into pString[RMSGS1_INDEX][1]
-+  SINT16 imsg413UsPilot ;                     // (BOTH)??
-+  UINT16 imsg413SkipPhaseOp ;                 // (POTS)
-+
-+  UINT16 ctrlMsmSensitivity1 ;                // (BOTH) value to set
-+  UINT16 ctrlMsmTxPsdShape_f;                 // (BOTH) upstream spectral shaping flag
-+
-+  UINT16 ovhdAocUsBswapReq_f ;                // (BOTH)value to set
-+  UINT16 ovhdAocScanMse_f  ;                  // (BOTH)value to set
-+
-+  SINT16 phyRevFullFirstBin ;                 //
-+  SINT16 phyRevFullLastBin ;                  //
-+  SINT16 phyRevFirstBin ;                     //
-+  SINT16 phyRevLastBin ;                      //
-+  SINT16 phyMedFirstBin ;                     //
-+  SINT16 phyMedLastBin ;                      //
-+  SINT16 phyMedOptionalLastBin;               // Medley last bin - optional
-+
-+  SINT16 phyEcDelayAdjustment;                // Echo delay adjustment
-+  SINT16 bSwapThresholdUpdate;                // bSwapThresholdUpdate
-+  SINT16 phyBitaFastPathExcessFineGainBump;   // Used in phy_bita.c
-+  SINT16 phyBitaSkipGapAdjustment;            // Used in phy_bita.c
-+  SINT16 usPilotInT1413ModeInMedley;          // To send Upstream Pilot in medley in T1.413 mode.
-+
-+  UINT32 profileVendorId ;                    // vendor id
-+
-+} DEV_HOST_coData_t ;
-+
-+typedef struct
-+{
-+  DEV_HOST_coData_t *  hostProfileBase_p;     // base address of profile list
-+} DEV_HOST_profileBase_t ;
-+
-+
-+
-+// -----------------------------------
-+// Begin DSP/Host Mailbox Definitions.
-+// -----------------------------------
-+
-+// The 3 values below can never be decreased, only increased.
-+// If you increase one of the values, you must add more to the
-+//   initializers in "dev_host_interface.c".
-+#define DEV_HOST_HOSTQUEUE_LENGTH  8
-+#define DEV_HOST_DSPQUEUE_LENGTH   8
-+#define DEV_HOST_TEXTQUEUE_LENGTH  8
-+
-+// Never access a struct of this typedef directly.  Always go through the DEV_HOST_mailboxControl_t struct.
-+typedef struct
-+{
-+  UINT8 cmd;
-+  UINT8 tag;
-+  UINT8 param1;
-+  UINT8 param2;
-+} DEV_HOST_dspHostMsg_t;
-+
-+// Never access a struct of this typedef directly.  Always go through the DEV_HOST_mailboxControl_t struct.
-+typedef struct
-+{
-+  UINT32 msgPart1;
-+  UINT32 msgPart2;
-+} DEV_HOST_textMsg_t;
-+
-+// The structure below has been ordered so that the Host need only write to
-+// even byte locations to update the indices.
-+
-+// The Buffer pointers in the struct below each point to a different
-+//   struct array that has an array size of one of the matching Queue Length
-+//   values defined above (DEV_HOST_HOSTQUEUE_LENGTH, DEV_HOST_DSPQUEUE_LENGTH,
-+//   and DEV_HOST_TEXTQUEUE_LENGTH).
-+
-+typedef struct
-+{
-+  UINT8 hostInInx;  // Host write, DSP must never write except for init
-+  UINT8 bDummy0[3]; //   dummy bytes for explicit 32-bit alignment
-+  UINT8 hostOutInx; // DSP write, Host must never write
-+  UINT8 bDummy1[3]; //   dummy bytes for explicit 32-bit alignment
-+  UINT8 dspOutInx;  // Host write, DSP must never write except for init
-+  UINT8 bDummy2[3]; //   dummy bytes for explicit 32-bit alignment
-+  UINT8 dspInInx;   // DSP write, Host must never write
-+  UINT8 bDummy3[3]; //   dummy bytes for explicit 32-bit alignment
-+  UINT8 textInInx;  // DSP write, Host must never write
-+  UINT8 bDummy4[3]; //   dummy bytes for explicit 32-bit alignment
-+  UINT8 textOutInx; // Host write, DSP must never write except for init
-+  UINT8 bDummy5[3]; //   dummy bytes for explicit 32-bit alignment
-+  DEV_HOST_dspHostMsg_t *hostMsgBuf_p;  // pointer to Host Mailbox Buffer (Host writes the buffer)
-+  DEV_HOST_dspHostMsg_t *dspMsgBuf_p;   // pointer to DSP Mailbox Buffer (DSP writes the buffer)
-+  DEV_HOST_textMsg_t *textMsgBuf_p;     // pointer to Text Mailbox Buffer (DSP writes the buffer)
-+} DEV_HOST_mailboxControl_t;
-+
-+
-+//-----------------------------------------
-+// Physical layer performance parameter
-+//-----------------------------------------
-+typedef struct
-+{
-+  SINT32 hybridCost[5];             // Cost functions for hybrids (0: none, 1-4 hybrid options)
-+  SINT32 usAvgGain;                 // upstream average gain in 20log10 (Q8)
-+  SINT32 dsAvgGain;                 // downstream average gain in 20log10 (Q8)
-+  UINT8  disableDspHybridSelect_f;  // Allows host to disable the automatic hybrid selection by the DSP
-+  UINT8  hostSelectHybridNum;       // DSP will use this hybrid number only if DSP Select is disabled (values: 1-4)
-+  UINT8  currentHybridNumUsed;      // DSP indicates to the host the current hybrid number in use
-+  UINT8  reserved1;                 // reserved for future use
-+} DEV_HOST_phyPerf_t;
-+
-+
-+/***********************************************************
-+ * The 3 structures below are used only for analog
-+ * diagnostic functions originally defined in diag.h
-+ * Moved here by Carlos A. Perez under J. Bergsagel request
-+ ***********************************************************/
-+
-+/****************************************************************************/
-+/* Options for the Analog Diagnostic user input data structure              */
-+/* (MUST be word aligned)                                                   */
-+/****************************************************************************/
-+typedef enum
-+{
-+  ZERO_DIAG_OPT   = 0,       // dummy value for zero place-holder
-+  NOISE_ONLY      = 0x1,     // diagnostic in noise only mode (on=1, off=0), disregard diagMode 0-4
-+  EXTERNAL_CO     = 0x2,     // operates against external CO (external=1, internal=0)
-+  DIAG_AGC        = 0x4,     // agc selects gains control (agc=1, manual=0)
-+  CROSSTALK_TEQ   = 0x8,     // crosstalk selects teq (crosstalk=1, manual=0)
-+  LEAKY_TEQ       = 0x10,    // use leaky teq (on=1, off=0)
-+  AUX_AMPS        = 0x20,    // auxamps (on=1, off=0)
-+  BW_SELECT       = 0x40,    // change rxhpf/txlpf fc (modify=1, default=0)
-+  DIAG_HYB_SELECT = 0x80,    // change hybrid (modify=1, default=0)
-+  POWER_DOWN_CDC  = 0x100,   // power down codec (power down=1, no power down=0)
-+  ISDN_OP_MODE    = 0x200,   // operation mode (pots=0, isdn=1)
-+  BYPASS_RXAF2    = 0x400,   // Bypass except RXAF2 (on=1, off = 0)
-+  TX_TEST_CONT    = 0x800,   // Continuous tx test (on=1, off=0)
-+  TX_SCALE_MTT    = 0x1000   // Scale tx signal for Mtt test (on=1, off=0)
-+} DEV_HOST_diagAnlgOptionsVar_t;
-+
-+/****************************************************************************/
-+/* Analog Diagnostic user input data structure (MUST be word align)         */
-+/****************************************************************************/
-+
-+typedef struct
-+{
-+  DEV_HOST_diagAnlgOptionsVar_t   diagOption; // Other diagnostic optional settings
-+
-+  UINT8                     diagMode;     // Performance diagnostic mode
-+  UINT8                     txMode;       // transmit mode
-+  UINT8                     rxMode;       // receive mode
-+  UINT8                     teqSp;        // Select teq starting pt
-+  UINT8                     txDf1;        // see dev_codec_filters.c and
-+  UINT8                     txDf2a;       // dev_codec.h for filter coefficients
-+  UINT8                     txDf2b;
-+  UINT8                     rxDf4;
-+
-+  UINT16                    codingGain256Log2;  // 256*Log2(coding gain)
-+  UINT16                    noiseMargin256Log2; // 256*Log2(noise margin)
-+
-+  UINT16                    rxPga1;       // PGA1
-+  UINT16                    rxPga2;       // PGA2
-+  UINT16                    rxPga3;       // PGA3
-+  UINT16                    anlgEq;       // AEQ settings (dB/MHz)
-+
-+  SINT8                     pilotBin;     // Select  pilot subchannel
-+  SINT8                     txSwGain;     // manual set for bridge tap loop
-+  SINT8                     tdw1Len;      // TDW1 length - 0,2,4,8,16
-+  SINT8                     tdw2Len;      // TDW2 length - 0,2,4,8,16
-+
-+  UINT8                     teqEcMode;    // TEQ/EC mode
-+  UINT8                     hybrid;
-+  UINT8                     txAttn;       // Codec Tx attenuation
-+  UINT8                     txGain;       // Codec Tx gain (Sangam only)
-+
-+  SINT16                    txPda;        //Codec Tx Digital gain/attn
-+  UINT8                     txTone[MAX_NUM_UPBINS];  // Turning tones on/off
-+                                                     // Still govern by lastbin
-+  UINT16                   rsvd;          //for 32 bits alignment
-+}DEV_HOST_diagAnlgInputVar_t;
-+
-+/****************************************************************************/
-+/* Analog diagnostic output data structure                                  */
-+/****************************************************************************/
-+typedef struct
-+{
-+  PSINT32  rxSnr_p[2];                  // Pointer to estimated snr
-+  PSINT32  rxSubChannelCapacity_p[2];   // Pointer to estimated subchan capacity
-+  PSINT32  rxSignalPower_p[2];          // Pointer to estimated signal power
-+  PSINT32  rxNoisePower_p[2];           // Pointer to estimated noise power
-+  PSINT32  rxAvg_p;                     // Pointer to average of rcvd signal
-+  SINT32   chanCapacity[2] ;            // Channel total capacity
-+  SINT32   dataRate[2];                 // Modem data rate (SNR)
-+  SINT32   avgNoiseFloor;               // Average noise floor
-+  SINT16   snrGap256Log2;               // 256*Log2(snr gap)
-+  SINT16   rxPga1;                      // PGA1
-+  SINT16   rxPga2;                      // PGA2
-+  SINT16   rxPga3;                      // PGA3
-+  SINT16   anlgEq;                      // AEQ settings (dB/MHz)
-+  SINT16   rsvd;
-+}DEV_HOST_diagAnlgOutputVar_t;
-+
-+
-+// Bit field structure that allows the host to mask off interrupt sources for possible DSP-to-Host interrupts.
-+// Each bit represents a possible source of interrupts in the DSP code that might cause a DSP-to-Host
-+//   interrupt to occur.
-+// This mask structure is not intended to show how interrupt sources in the DSP code correspond to the actual
-+//   DSP-to-Host interrupts.  There could be multiple ways to cause an interrupt in the DSP code, but they all
-+//   eventually tie into one of the three possible DSP-to-Host interrupts.
-+// The host should write a "1" to an individual bit when it wants to mask possible interrupts from that source.
-+
-+// enum that represents individual bits in maskBitField1
-+typedef enum
-+{
-+  ZERO_MASK1      = 0,   // dummy value for zero place-holder
-+  DSP_MSG_BUF     = 0x1, // mask interrupts due to DSP-to-Host message mailbox updates
-+  STATE_BIT_FIELD = 0x2, // mask interrupts due to changes in the modem state bit fields
-+  DSP_HEARTBEAT   = 0x4  // mask interrupts for the DSP hearbeat
-+} DEV_HOST_intMask1_t; // this enum should only have 32 values in it (maximum).
-+
-+// Add more "mask bit fields" at the end of this struct if you need more mask values
-+typedef struct
-+{
-+  DEV_HOST_intMask1_t maskBitField1;
-+} DEV_HOST_hostInterruptMask_t;  // this struct should only have 32 bits in it.
-+
-+// Bit field structure that allows the host to determine the source(s) of DSP-to-Host interrupts in case
-+//   several of the interrupt sources get combined onto a single DSP-to-Host interrupt.
-+// DSP will set each bit to a "1"as an interrupt occurs.
-+// Host has the reponsibility to clear each bit to a "0" after it has determined the source(s) of interrupts.
-+// Each source bit field in this struct will use the same enum typedef that matches the corresponding mask
-+//   bit field in "DEV_HOST_hostInterruptMask_t"
-+typedef struct
-+{
-+  DEV_HOST_intMask1_t sourceBitField1;
-+} DEV_HOST_hostInterruptSource_t;
-+
-+
-+// --------------------------
-+// Begin bitswap definitions.
-+// --------------------------
-+
-+// bitSwapSCnt contains the superframe to perform bit swap
-+// The entries must be ordered so that the first group only contains bit change commands
-+// The other entries may contain power adjustment instructions and must be
-+// written with something.  NOP (0) is an available instruction.
-+typedef struct
-+{
-+  PUINT8 fineGains_p;          // pointer to bng string, needed to check fine gains for powerswap
-+  UINT8  bitSwapNewIndices[6]; // Bin before bitSwapBin to process
-+  UINT8  bitSwapCmd[6];        // Bitswap command for bitSwapBin
-+  UINT8  bitSwapBin[6];        // bin to modify
-+  UINT8  bitSwapSCnt;          // Superframe count on which to perform bitswap
-+  UINT8  bitSwapEnabled;       // bitSwapEnabled
-+} DEV_HOST_dspBitSwapDef_t;
-+
-+
-+// ---------------------------
-+// Begin ATM BERT definitions.
-+// ---------------------------
-+
-+// Structure used for ATM Idle Cells based bit error rate computation.
-+typedef struct
-+{
-+  UINT8  atmBertFlag;      // Feature enable/disable flag (Host write)
-+  UINT8  dummy1;
-+  UINT8  dummy[2];         // Dummy bytes for 32-bit alignment
-+  UINT32 bitCountLow;      // Low part of 64-bit BERT bit count (DSP write)
-+  UINT32 bitCountHigh;     // High part of 64-bit BERT bit count (DSP write)
-+  UINT32 bitErrorCountLow; // Low part of 64-bit BERT bit count (DSP write)
-+  UINT32 bitErrorCountHigh;// High part of 64-bit BERT bit count (DSP write)
-+} DEV_HOST_atmDsBert_t;
-+
-+
-+// ------------------------------------
-+// Misc. modem environment definitions.
-+// ------------------------------------
-+
-+
-+typedef struct
-+{
-+  SINT16 subStateIndex;        // Index that signifies datapump substate. (DSP write)
-+  UINT8  externalBert;         // Turn on/off external BERT interface. 0 = OFF; 1 = ON. (Host write)
-+  UINT8  usBertPattern;        // BERT pattern for US TX data. 0 = 2^15-1; 1 = 2^23-1. (Host write)
-+  UINT8  overrideDslLinkLed_f; // Overrides DSP operation of the DSL_LINK LED. (Host write)
-+                               //   0 = DSP is in control; 1 = Host is in control.
-+  UINT8  dslLinkLedState_f;    // DSL_LINK LED state when override flag has been set. (Host write)
-+                               //   DSL_LINK LED will be updated with this value once per frame.
-+                               //   LED is active-low: 0 = ON, 1 = OFF.
-+  UINT8  overrideDslActLed_f;  // Overrides DSP operation of the DSL_ACT LED. (Host write)
-+                               //   0 = DSP is in control; 1 = Host is in control.
-+  UINT8  dslActLedState_f;     // DSL_ACT LED state when override flag has been set. (Host write)
-+                               //   DSL_ACT LED will be updated with this value once per frame.
-+                               //   LED is active-low: 0 = ON, 1 = OFF.
-+  UINT8  dGaspLprIndicator_f;  // How LPR signal (GPIO[0]) is to be interpreted. (Host write)
-+                               //   0 = LPR is active-low; 1 = LPR is active-high.
-+  UINT8  overrideDspLprGasp_f; // Overrides DSP detection of LPR signal to send out DGASP. (Host write)
-+                               //   0 = DSP detects LPR; 1 = Host detects LPR and sends "HOST_DGASP" to DSP.
-+  UINT8  pcbEnabled;           // DS power cut back
-+  UINT8  maxAvgFineGainCtrl_f; // If maxAvgFineGainCtrl_f == 0, then the datapump controls the maximum average fine gain value.
-+                               // If maxAvgFineGainCtrl_f == 1, then the host controls the maximum average fine gain value.
-+  UINT32 reasonForDrop;        // This field will tell the host what might be the reason for a dropped connection.
-+  SINT16 maxAverageFineGain;   // When maxAvgFineGainCtrl_f == 1, the value in maxAverageFineGain is the maximum average fine gain level in 256log2 units.
-+  UINT8  reserved1;            // These are for 32-bit alignment.
-+  UINT8  reserved2;            // These are for 32-bit alignment.
-+} DEV_HOST_modemEnvPublic_t;
-+
-+
-+// -----------------------------
-+// Generic structure definition.
-+// -----------------------------
-+
-+typedef struct
-+{
-+  PSINT8  parameter1_p;
-+  PSINT16 parameter2_p;
-+  PSINT32 parameter3_p;
-+  PUINT8  parameter4_p;
-+  PUINT16 parameter5_p;
-+  PUINT32 parameter6_p;
-+} DEV_HOST_genericStructure_t;
-+
-+
-+// ------------------------------
-+// Begin G.hs buffer definitions.
-+// ------------------------------
-+
-+typedef struct
-+{
-+  UINT8 txBuf[64]; // G.hs xmt buffer
-+} DEV_HOST_ghsDspTxBufDef_t;
-+
-+
-+typedef struct
-+{
-+  UINT8 rxBuf[80]; // G.hs rcv buffer
-+} DEV_HOST_ghsDspRxBufDef_t;
-+
-+// -----------------------------------------
-+// Begin Constellation Display definitions.
-+// -----------------------------------------
-+
-+typedef struct
-+{
-+  UINT32  consDispStartAddr;     // Host write
-+  UINT32  consDispCurrentAddr;   // Host write
-+  UINT32  consDispBufLen;        // Constellation Buffer Length
-+  UINT32  consDispBin;           // Host write, DS band only
-+} DEV_HOST_consBufDef_t;
-+
-+typedef struct
-+{
-+  PSINT16 buffer1_p;          //DSP write
-+  PSINT16 buffer2_p;          //DSP write
-+} DEV_HOST_snrBuffer_t;
-+
-+// --------------------------------------------------------------------------------------
-+// Typedef to be used for the DEV_HOST_dspOamSharedInterface_s struct of pointers
-+//  (this is used in dev_host_interface.c).
-+// NOTE: This struct of pointers is NEVER to be referenced anywhere else in the DSP code.
-+// IMPORTANT: Only pointers to other structs go into this struct !!
-+// --------------------------------------------------------------------------------------
-+typedef struct
-+{
-+  DEV_HOST_hostIntfcVersionDef_t   *hostIntfcVersion_p;
-+  DEV_HOST_dspVersionDef_t         *datapumpVersion_p;
-+  DEV_HOST_modemStateBitField_t    *modemStateBitField_p;
-+  DEV_HOST_dspWrNegoParaDef_t      *dspWriteNegoParams_p;
-+  DEV_HOST_oamWrNegoParaDef_t      *oamWriteNegoParams_p;
-+  DEV_HOST_raMsgsDef_t             *raMsgs_p;
-+  DEV_HOST_dspWrSuperFrameCntDef_t *dspWriteSuperFrameCnt_p;
-+  DEV_HOST_msg_t                   *atucMsg_p;
-+  DEV_HOST_msg_t                   *aturMsg_p;
-+  DEV_HOST_dspWrSharedTables_t     *dspWrSharedTables_p;
-+  DEV_HOST_olayDpDef_t             *olayDpParms_p;
-+  DEV_HOST_eocVarDef_t             *eocVar_p;
-+  DEV_HOST_clearEocVarDef_t        *clearEocVar_p;
-+  DEV_HOST_modemStatsDef_t         *modemStats_p;
-+  DEV_HOST_atmStats_t              *atmStats_p;
-+  DEV_HOST_mailboxControl_t        *dspHostMailboxControl_p;
-+  DEV_HOST_phyPerf_t               *phyPerf_p;
-+  DEV_HOST_diagAnlgInputVar_t      *analogInputVar_p;
-+  DEV_HOST_diagAnlgOutputVar_t     *analogOutputVar_p;
-+  DEV_HOST_hostInterruptMask_t     *hostInterruptMask_p;
-+  DEV_HOST_profileBase_t           *profileList_p;
-+  DEV_HOST_hostInterruptSource_t   *hostInterruptSource_p;
-+  DEV_HOST_dspBitSwapDef_t         *dspBitSwapDstrm_p;
-+  DEV_HOST_dspBitSwapDef_t         *dspBitSwapUstrm_p;
-+  DEV_HOST_atmDsBert_t             *atmDsBert_p;
-+  DEV_HOST_modemEnvPublic_t        *modemEnvPublic_p;
-+  DEV_HOST_genericStructure_t      *genericStructure1_p;
-+  DEV_HOST_genericStructure_t      *genericStructure2_p;
-+  DEV_HOST_ghsDspTxBufDef_t        *ghsDspTxBuf_p;
-+  DEV_HOST_ghsDspRxBufDef_t        *ghsDspRxBuf_p;
-+  DEV_HOST_consBufDef_t            *consDispVar_p;
-+  DEV_HOST_snrBuffer_t             *snrBuffer_p;
-+} DEV_HOST_dspOamSharedInterface_t;
-+
-+
-+// ---------------------------------------------------------------------------------
-+// Typedef to be used for the pointer to the DEV_HOST_dspOamSharedInterface_s struct
-+//  of pointers (this is used in dev_host_interface.c).
-+// ---------------------------------------------------------------------------------
-+typedef DEV_HOST_dspOamSharedInterface_t *DEV_HOST_dspOamSharedInterfacePtr_t;
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/dev_host_verdef.h linux.dev/drivers/atm/sangam_atm/dev_host_verdef.h
---- linux.old/drivers/atm/sangam_atm/dev_host_verdef.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dev_host_verdef.h	2005-08-23 04:46:50.091844608 +0200
-@@ -0,0 +1,102 @@
-+#ifndef __DEV_HOST_VERDEF_H__
-+#define __DEV_HOST_VERDEF_H__ 1
-+
-+//********************************************************************
-+//*
-+//*    DMT-BASE ADSL MODEM PROGRAM
-+//*    TEXAS INSTRUMENTS PROPRIETARTY INFORMATION
-+//*    AMATI CONFIDENTIAL PROPRIETARY
-+//*
-+//* (c) Copyright April 1999, Texas Instruments Incorporated.
-+//*     All Rights Reserved.
-+//*
-+//*   Property of Texas Instruments Incorporated and Amati Communications Corp.
-+//*
-+//* Restricted Rights - Use, duplication, or disclosure is subject to
-+//* restrictions set forth in TI's and Amati program license agreement and
-+//* associated documentation
-+//*
-+//*********************************************************************
-+//*
-+//* FILENAME: dev_host_verdef.h
-+//*
-+//* ABSTRACT: This file defines the version structure
-+//*
-+//* TARGET:  Non specific.
-+//*
-+//* TOOLSET:  Non specific.
-+//*
-+//* ACTIVATION:
-+//*
-+//* HISTORY:  DATE        AUTHOR   DESCRIPTION
-+//*           04/29/99    FLW      Created
-+//*           01/17/00    Barnett  Mod's in support of merging NIC
-+//*                                hardware rev 6/7 T1.413 codebases.
-+//*           01/21/00    Wagner   derfmake mods
-+//*           05/11/00    Barnett  hardware_rev is a 2 char string.
-+//*           07/24/00    Barnett  Rework as part of host interface redesign.
-+//*           11/29/00    Hunt     added chipset_id2
-+//*           03/30/01    Barnett  Prefixed all public elements with DSPDP_.
-+//*                                This insures uniqueness of names that might
-+//*                                match host names by coincidence.
-+//*           03/30/01    Barnett  Added DSPDP_Host_VersionDef to facilitate
-+//*                                representing a version id for the host i/f
-+//*                                separate from the firmware version id as
-+//*                                a courtesy to the host.
-+//*           07/23/01    JEB      Changed name from verdef_u.h to dpsys_verdef.h
-+//*           04/12/02    Barnett  Make timestamp unsigned 32-bit field.
-+//*                                Generalizes for all kinds of hosts.
-+//*           11/15/02    JEB      Changed name from dpsys_verdef.h to dev_host_verdef.h
-+//*                                Updated structs according to coding guidelines
-+//*           12/16/02    JEB      Renamed some struct elements for new usage in Ax7
-+//*           01/21/03    MCB      Implemented Ax7 UNIT-MODULE modular software framework.
-+//*           03/19/03    JEB      Added back in "bugFix" elements into each struct type.
-+//*                                Rearranged elements.
-+//*
-+//********************************************************************
-+
-+#include "env_def_typedefs.h"
-+
-+#define DSPDP_FLAVOR_NEWCODES 0xFF // Other values are valid old-style flavors
-+
-+// ------------------------------
-+// ------------------------------
-+// Begin DSP version definitions.
-+// ------------------------------
-+// ------------------------------
-+
-+typedef struct
-+{
-+  UINT32 timestamp;    // Number of seconds since 01/01/1970
-+  UINT8  major;        // Major "00".00.00.00 revision nomenclature
-+  UINT8  minor;        // Minor 00."00".00.00 revision nomenclature
-+  UINT8  bugFix;       // Bug Fix 00.00."00".00 revision nomenclature
-+  UINT8  buildNum;     // Build Number 00.00.00."00" revision nomenclature
-+  UINT8  netService;   // Network service identifier
-+  UINT8  chipsetGen;   // chipset generation
-+  UINT8  chipsetId;    // chipset identifier
-+  UINT8  chipsetId2;   // second byte for "RV" chipset et al.
-+  UINT8  hardwareRev1; // hardware revision, 1st char
-+  UINT8  hardwareRev2; // hardware revision, 2nd char
-+  UINT8  featureCode;  // feature code
-+  UINT8  dummy1;       // dummy byte for explicit 32-bit alignment
-+} DEV_HOST_dspVersionDef_t;
-+
-+// -------------------------------
-+// -------------------------------
-+// Begin host version definitions.
-+// -------------------------------
-+// -------------------------------
-+
-+typedef struct
-+{
-+  UINT8 major;        // Major "00".00.00.00 revision nomenclature
-+  UINT8 minor;        // Minor 00."00".00.00 revision nomenclature
-+  UINT8 bugFix;       // Bug Fix 00.00."00".00 revision nomenclature
-+  UINT8 buildNum;     // Build Number 00.00.00."00" revision nomenclature
-+  UINT8 netService;   // Network service identifier
-+  UINT8 dummy[3];     // dummy bytes for explicit 32-bit alignment
-+} DEV_HOST_hostIntfcVersionDef_t;
-+
-+
-+#endif // __DEV_HOST_VERDEF_H__
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_api.c linux.dev/drivers/atm/sangam_atm/dsl_hal_api.c
---- linux.old/drivers/atm/sangam_atm/dsl_hal_api.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_api.c	2005-08-23 04:46:50.095844000 +0200
-@@ -0,0 +1,3339 @@
-+/*******************************************************************************
-+* FILE PURPOSE:     DSL Driver API functions for Sangam
-+*
-+********************************************************************************
-+* FILE NAME:        dsl_hal_basicapi.c
-+*
-+* DESCRIPTION:  
-+*       Contains basic DSL HAL APIs for Sangam
-+*  
-+*                    
-+* (C) Copyright 2001-02, Texas Instruments, Inc.
-+*    History
-+*    Date        Version            Notes
-+*    06Feb03     0.00.00            RamP   Original Version Created
-+*    10Mar03     0.00.01            RamP   Initial Revision for Modular Code Branch
-+*    19Mar03     0.00.02            RamP   Fixed DSL and DSP Version API Structures
-+*    20Mar03     0.00.03            RamP   Changed byteswap function names
-+*    21Mar03     0.00.03         RamP/ZT   Malloc for DSP f/w done in dslStartup
-+*    25Mar03     0.00.04            RamP   Removed statistics used only by SWTC
-+*                                          Created Checkpoint 3
-+*    26Mar03     0.00.05            RamP   Added Memory allocation for fwimage in
-+*                                          dslStartup function.
-+*    07Apr03     0.00.06            RamP   Implemented new error reporting scheme
-+*                                          Changed Commenting to C style only
-+*    09Apr03     0.00.07            RamP   Reorganized code to delete POST_SILICON
-+*    10Apr03     0.00.08            RamP   Removed ptidsl from loadFWImage function
-+*                                          moved size and fwimage initialization to
-+*                                          dslStartup function
-+*    14Apr03     0.00.09            RamP   Moved modemStateBitField processing to a
-+*                                          support function; deleted stateHistory
-+*                                          renamed the REG32 macro
-+*    15Apr03     0.00.10            RamP   Changed firmware allocate to shim_ 
-+*                                          osAllocateVMemory function
-+*    15Apr03     0.00.11            RamP   Changed host version number to 07.00.00.01
-+*    16Apr03     0.00.12            RamP   Modified return condition on dslShutdown
-+*    16Apr03     0.00.13            RamP   Changed host version number to 07.00.00.02
-+*    21Apr03     0.01.00            RamP   Cleaned up dslShutdown function
-+*                                          Added new function calls to allocate
-+*                (Alpha)                   /free overlay pages for different OS
-+*                                          Fixed typecasting for allocate/free fxns
-+*                                          Added Interrupt Acknowledge logic
-+*    22Apr03     0.01.01            RamP   Moved acknowledgeInterrupt into api
-+*                                          Added static global for intr source
-+*    24Apr03     0.01.02            RamP   Added processing for OVERLAY_END in
-+*                                          DSP message handlers, verified crc32
-+*                                          recovery for overlays
-+*    28Apr03     0.01.03            RamP   Removed global variable intrSource
-+*                                          Added parameter to handleInterrupt fxn
-+*                (Alpha Plus)              to indicate interrupt source
-+*                                          Changed version number to 01.00.01.00    
-+*                                          Fixed setTrainingMode function problem 
-+*    07May03     0.01.04            RamP   Removed delineation state check in 
-+*                                          message handling functions, added more
-+*                                          safety for setting lConnected in TC_SYNC
-+*                                          Changed version number to 01.00.01.01                                      
-+*    14May03     0.01.05            RamP   Added 3 Switchable Hybrid APIs
-+*                                          Added additional statistics us/ds TxPower,
-+*                                          us margin,attenuation, us/ds bitallocation
-+*                                          moved versioning to dsl_hal_version.h
-+*    14May03     0.01.06            RamP   Fixed problem with CMsgs2 parsing
-+*    20May03     0.01.07            RamP   Added Inner/Outer pair API support. Added
-+*                                          dying gasp message.
-+*    29May03     0.01.08         ZT/RamP   Added memory optimizations for overlay pages
-+*                                          and coProfiles; added functions to free,
-+*                                          reload overlays and profiles
-+*    04Jun03     0.01.09            RamP   Added tick counters, fail states reporting
-+*                                          Made statistics fixes for higher data rates
-+*                                          Added Margin per tone to statistics
-+*                                          Added configuration checks for trellis/FEC
-+*    06Jun03     0.01.10            RamP   Added LED, STM Bert, dGasp LPR Config APIs
-+*                                          Modified interrupt acknowledge logic 
-+*                                          Added current hybrid flag as statistic
-+*    09Jun03     0.01.11            RamP   Added function to send dying Gasp to Modem
-+*                                          fixed problem with reading OamNegoPara var
-+*                (Beta)                    fixed problem with reading current config
-+*                                          Added function to configure ATM Bert
-+*                                          fixed memory leak due to coProfiles
-+*                                          Added us/ds R/S FEC statistics
-+*                                          Added additional config capability for LED
-+*                                          fixed problem in free memory for CO profiles
-+*    18Jul03     0.01.12            RamP   Fixed problem with reading modemEnv structure
-+*                                          affects LED, DGaspLpr APIs   
-+*                                          Sending Dying Gasp from shutdown function
-+*    01Aug03     0.01.13            RamP   Added preferred training mode to statistics
-+*    13Aug03     0.01.14            MCB    Set rev id for D3/R1.1 (ADSL2).
-+*    21Aug03     0.01.15            RamP   Added g.hs and aoc bitswap message gathering
-+*                                          Added new references to bits n gains table
-+*                                          Decoupled modem idle/retrain from pair select 
-+*                                          Added line length and gross gain to statistics 
-+*    29Sep03     0.01.16            RamP   Replaced advcfg function calls with support
-+*                                          module function switches
-+*    01Oct03     0.01.17            RamP   Added enum translation to set training mode
-+*                                          & to read statistics
-+*    08Oct03     0.01.18            RamP   Fixed problems with usTxPower statistic in 
-+*                                          Annex B target, fixed problem with Trellis
-+*    12Oct03     0.01.19            RamP   Added API calls to gather ADSL2 Messages
-+*    29Oct03     0.01.20            RamP   Restored TC_SYNC detect logic
-+*    30Oct03     0.01.21            RamP   Removed Scaling factor for adsl2DSConRate
-+*                                          Setting Showtime state upon DSP_ACTIVE
-+*    14Nov03     0.01.22            RamP   Fixed scaling for usTxPower & dsTxPower
-+*    14Nov03     0.01.23            RamP   Added logic to gather CRates1/RRates1
-+*                                          by parsing DSP_CRATES1
-+*    20Nov03     0.01.24            RamP   Added generic & interface Read
-+*                                          and Write functions to read from 
-+*                                          DSP - Host Interface
-+*    24Nov03     0.01.25            RamP   Modified interface Read/Write functions
-+*                                          to seperate element offsets from pointers
-+*    19Dec03     0.01.26            RamP   Modified pointer accessing problems with
-+*                                          block read functions
-+*    26Dec03     0.01.27            RamP   Made ghsIndex a local variable & added 
-+*                                          check to avoid buffer overflow     
-+*    30Dec03     0.01.28            RamP   Added generic mailbox command function
-+*******************************************************************************/
-+#include "dsl_hal_register.h"
-+#include "dsl_hal_support.h"
-+#include "dsl_hal_logtable.h"
-+#include "dsl_hal_version.h"
-+
-+static unsigned int hybrid_selected;
-+static unsigned int showtimeFlag = FALSE;
-+
-+#ifdef PRE_SILICON
-+/*********************************************/
-+/*   Base Addresses                          */
-+/*********************************************/
-+#define DEV_MDMA_BASE                 0x02000500
-+
-+/*********************************************/
-+/*   MC DMA Control Registers in DSL         */
-+/*********************************************/
-+
-+#define DEV_MDMA0_SRC_ADDR         (DEV_MDMA_BASE + 0x00000000)
-+#define DEV_MDMA0_DST_ADDR         (DEV_MDMA_BASE + 0x00000004)
-+#define DEV_MDMA0_CTL_ADDR         (DEV_MDMA_BASE + 0x00000008)
-+#define DEV_MDMA1_SRC_ADDR         (DEV_MDMA_BASE + 0x00000040)
-+#define DEV_MDMA1_DST_ADDR         (DEV_MDMA_BASE + 0x00000044)
-+#define DEV_MDMA1_CTL_ADDR         (DEV_MDMA_BASE + 0x00000048)
-+#define DEV_MDMA2_SRC_ADDR         (DEV_MDMA_BASE + 0x00000080)
-+#define DEV_MDMA2_DST_ADDR         (DEV_MDMA_BASE + 0x00000084)
-+#define DEV_MDMA2_CTL_ADDR         (DEV_MDMA_BASE + 0x00000088)
-+#define DEV_MDMA3_SRC_ADDR         (DEV_MDMA_BASE + 0x000000C0)
-+#define DEV_MDMA3_DST_ADDR         (DEV_MDMA_BASE + 0x000000C4)
-+#define DEV_MDMA3_CTL_ADDR         (DEV_MDMA_BASE + 0x000000C8)
-+
-+#define DEV_MDMA0_SRC           (*((volatile UINT32 *) DEV_MDMA0_SRC_ADDR))
-+#define DEV_MDMA0_DST           (*((volatile UINT32 *) DEV_MDMA0_DST_ADDR))
-+#define DEV_MDMA0_CTL           (*((volatile UINT32 *) DEV_MDMA0_CTL_ADDR))
-+#define DEV_MDMA1_SRC           (*((volatile UINT32 *) DEV_MDMA1_SRC_ADDR))
-+#define DEV_MDMA1_DST           (*((volatile UINT32 *) DEV_MDMA1_DST_ADDR))
-+#define DEV_MDMA1_CTL           (*((volatile UINT32 *) DEV_MDMA1_CTL_ADDR))
-+#define DEV_MDMA2_SRC           (*((volatile UINT32 *) DEV_MDMA2_SRC_ADDR))
-+#define DEV_MDMA2_DST           (*((volatile UINT32 *) DEV_MDMA2_DST_ADDR))
-+#define DEV_MDMA2_CTL           (*((volatile UINT32 *) DEV_MDMA2_CTL_ADDR))
-+#define DEV_MDMA3_SRC           (*((volatile UINT32 *) DEV_MDMA3_SRC_ADDR))
-+#define DEV_MDMA3_DST           (*((volatile UINT32 *) DEV_MDMA3_DST_ADDR))
-+#define DEV_MDMA3_CTL           (*((volatile UINT32 *) DEV_MDMA3_CTL_ADDR))
-+
-+/* MDMA control bits                     */
-+
-+#define DEV_MDMA_START             0x80000000
-+#define DEV_MDMA_STOP              0x00000000
-+#define DEV_MDMA_STATUS            0x40000000
-+#define DEV_MDMA_DST_INC           0x00000000
-+#define DEV_MDMA_DST_FIX           0x02000000   
-+#define DEV_MDMA_SRC_INC           0x00000000
-+#define DEV_MDMA_SRC_FIX           0x00800000 
-+#define DEV_MDMA_BURST1            0x00000000
-+#define DEV_MDMA_BURST2            0x00100000
-+#define DEV_MDMA_BURST4            0x00200000 
-+
-+#define DEV_MDMA_LEN_SHF           2
-+#define DEV_MDMA_LEN_MASK          0x0000FFFF
-+
-+#define DMA0   0
-+#define DMA1   1
-+#define DMA2   2
-+#define DMA3   3
-+#endif
-+#ifdef DMA
-+SINT32 getDmaStatus(UINT32 mask)
-+{
-+  if(!(IFR & mask))
-+  {
-+   return DSLHAL_ERROR_NO_ERRORS;
-+  }
-+  else
-+  {
-+   ICR = mask ;
-+   return 1 ;
-+  }
-+}
-+
-+void programMdma(UINT32 dma, UINT32 source, UINT32 destination, UINT32 length, UINT32 wait)
-+{
-+  volatile UINT32 statusMask ;
-+
-+  switch(dma)
-+  {
-+  case DMA0:
-+    {
-+      DEV_MDMA0_SRC = source ;
-+      DEV_MDMA0_DST = destination ;
-+      DEV_MDMA0_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
-+                       DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ;
-+      statusMask = 0x00000010 ;
-+    }
-+    break ;
-+  case DMA1:
-+    {
-+          DEV_MDMA1_SRC = source ;
-+          DEV_MDMA1_DST = destination ;
-+          DEV_MDMA1_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
-+                           DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ;
-+          statusMask = 0x00000020 ;
-+        }
-+    break ;
-+  case DMA2:
-+    {
-+          DEV_MDMA2_SRC = source ;
-+          DEV_MDMA2_DST = destination ;
-+          DEV_MDMA2_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
-+                           DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ;
-+          statusMask = 0x00000040 ;
-+        }
-+    break ;
-+  case DMA3:
-+    {
-+          DEV_MDMA3_SRC = source ;
-+          DEV_MDMA3_DST = destination ;
-+          DEV_MDMA3_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
-+                           DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ;
-+          statusMask = 0x00000080 ;
-+        }
-+    break ;
-+
-+  }
-+
-+  if(wait)
-+  {
-+    while(!(getDmaStatus(statusMask))) ;
-+  }
-+
-+}
-+#endif
-+
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_dslStartup
-+*
-+*******************************************************************************************
-+* DESCRIPTION: Entry point to initialize and load ax5 daughter board
-+*
-+* INPUT:   PITIDSLHW_T *ppIHw  
-+*
-+* RETURN:  0 --succeeded
-+*          1 --Failed
-+*
-+*****************************************************************************************/
-+
-+int dslhal_api_dslStartup(PITIDSLHW_T *ppIHw)
-+{
-+  
-+  ITIDSLHW_T *ptidsl;
-+  int  i;
-+  int rc;
-+  dprintf(4,"dslhal_api_dslStartup() NEW 1\n");
-+  
-+  ptidsl=(ITIDSLHW_T *)shim_osAllocateMemory(sizeof(ITIDSLHW_T));
-+  if(ptidsl==NULL)
-+    {
-+    dprintf(1, "unable to allocate memory for ptidsl\n");
-+    return 1;
-+    }
-+  *ppIHw=ptidsl;
-+  shim_osZeroMemory((char *) ptidsl, sizeof(ITIDSLHW_T));
-+
-+  /* Unreset the ADSL Subsystem  */
-+  rc=dslhal_support_unresetDslSubsystem();
-+  if(rc)
-+    {
-+    dprintf(1, "unable to reset ADSL Subsystem \n");
-+    shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T));
-+    return DSLHAL_ERROR_UNRESET_ADSLSS;
-+    }
-+  ptidsl->fwimage = shim_osAllocateVMemory(DSP_FIRMWARE_MALLOC_SIZE);
-+  if(!ptidsl->fwimage)
-+    {
-+      dprintf(1,"Failed to Allocate Memory for DSP firmware binary \n");
-+      return DSLHAL_ERROR_FIRMWARE_MALLOC;
-+    }
-+  /* read firmware file from flash   */
-+  rc=shim_osLoadFWImage(ptidsl->fwimage);
-+  if(rc<0)
-+    {
-+    dprintf(1, "unable to get fw image\n");
-+    shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE);
-+    shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T));
-+    return DSLHAL_ERROR_NO_FIRMWARE_IMAGE;
-+    }
-+  else
-+    {
-+      ptidsl->imagesize = rc;
-+     }
-+  /* Compute the CRC checksum on the image and validate the image */
-+
-+  /* Validate the image in the RAM */
-+
-+  /* load fw to DSP  */
-+ 
-+  if(dslhal_support_hostDspCodeDownload(ptidsl))
-+    {
-+    dprintf(0,"dsp load error\n");
-+    for(i=0; i<NUM_PAGES; i++)
-+      {
-+      if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL)
-+        {
-+        shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr, 
-+                     ptidsl->olayDpPage[i].OverlayXferCount);
-+        }
-+      }
-+     if(ptidsl->coProfiles.PmemStartWtAddr != NULL)
-+      shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount);
-+     if(ptidsl->constDisplay.PmemStartWtAddr != NULL)
-+      shim_osFreeDmaMemory((void *)ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.OverlayXferCount);
-+    shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE);
-+    shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T));
-+    return DSLHAL_ERROR_CODE_DOWNLOAD;
-+    }
-+  
-+  /* set flag to indicated overlay pages are loaded */
-+  ptidsl->bOverlayPageLoaded = 1;
-+  /* set auto retrain to 1 to disble the overlay page reload */
-+  ptidsl->bAutoRetrain = 1;
-+
-+  /* unreset Raptor */
-+  /* change this to new function */ 
-+  /* This function should basically bring DSP out of reset bit 23  of PRCR */
-+  /* Function is ready but bypassed for Pre-Silicon */
-+   
-+  rc=dslhal_support_unresetDsp();
-+  if (rc)
-+    {
-+    dprintf(0,"unable to bring DSP out of Reset\n");
-+    for(i=0; i<NUM_PAGES; i++)
-+      {
-+      if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL)
-+        {
-+        shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr, 
-+                     ptidsl->olayDpPage[i].OverlayXferCount);
-+        }
-+      }
-+    if(ptidsl->coProfiles.PmemStartWtAddr != NULL)
-+      shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount);
-+     if(ptidsl->constDisplay.PmemStartWtAddr != NULL)
-+      shim_osFreeDmaMemory((void *)ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.OverlayXferCount);
-+    shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE);
-+    shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T));
-+    return DSLHAL_ERROR_UNRESET_DSP;
-+    }
-+  shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE);
-+  dprintf(4,"dslhal_api_dslStartup() done\n");
-+
-+  /* Add the code to initialize the host interface variables */
-+  /* Add code to tickle the host interface */
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+
-+/******************************************************************************************
-+ * FUNCTION NAME:    dslhal_api_dslShutdown
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: routine to shutdown ax5 modem and free the resource
-+ *
-+ * INPUT:   tidsl_t *ptidsl  
-+ *
-+ * RETURN:  NULL
-+ *          
-+ *
-+ *****************************************************************************************/
-+
-+int dslhal_api_dslShutdown(tidsl_t *ptidsl)
-+{
-+  int rc= DSLHAL_ERROR_NO_ERRORS;
-+  int i;
-+  
-+  dprintf(5, "dslhal_api_dslShutdown\n");
-+  rc = dslhal_support_writeHostMailbox(ptidsl, HOST_DSLSS_SHUTDOWN, 0, 0, 0);  
-+  if(rc)
-+    {
-+     dprintf(1, " unable to reset DSP \n");
-+     rc = DSLHAL_ERROR_RESET_DSP;
-+    }
-+  /* DSP need 50 ms to send out the message*/
-+
-+  shim_osClockWait(60 * 1000);
-+
-+  rc = dslhal_support_writeHostMailbox(ptidsl, HOST_DGASP, 0, 0, 0);
-+  
-+  /* free memory allocated*/
-+
-+  for(i=0; i<NUM_PAGES; i++)
-+    {
-+    if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL)
-+      {
-+      shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr, 
-+                   ptidsl->olayDpPage[i].OverlayXferCount);
-+      }
-+    }
-+  if(ptidsl->coProfiles.PmemStartWtAddr != NULL)
-+     shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount);
-+  if(ptidsl->constDisplay.PmemStartWtAddr != NULL)
-+     shim_osFreeDmaMemory((void *)ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.OverlayXferCount);
-+  shim_osFreeMemory((void *)ptidsl, sizeof(tidsl_t));  
-+  rc = dslhal_support_resetDsp();
-+  if(rc)
-+    {
-+     dprintf(1, " unable to reset ADSL subsystem \n");
-+     rc = DSLHAL_ERROR_RESET_DSP;
-+    }
-+  rc = dslhal_support_resetDslSubsystem();
-+  if(rc)
-+    {
-+     dprintf(1, " unable to reset ADSL subsystem \n");
-+     rc = DSLHAL_ERROR_RESET_ADSLSS;
-+    }
-+return rc; 
-+}
-+  
-+ 
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_getDslHalVersion
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This routine supply DSL Driver version.
-+*
-+* INPUT:  tidsl_t * ptidsl
-+*         void *pVer, DSP Driver Version Pointer
-+*         
-+* RETURN:  0 --succeeded
-+*          1 --Failed
-+* Note: See verdef_u.h for version structure definition.
-+*****************************************************************************************/
-+
-+void dslhal_api_getDslHalVersion(void  *pVer)
-+{
-+  dslVer *pVersion;
-+  pVersion = (dslVer *)pVer;
-+  pVersion->major = (unsigned char) DSLHAL_VERSION_MAJOR;
-+  pVersion->minor = (unsigned char) DSLHAL_VERSION_MINOR;
-+  pVersion->bugfix = (unsigned char) DSLHAL_VERSION_BUGFIX;
-+  pVersion->buildNum = (unsigned char) DSLHAL_VERSION_BUILDNUM;
-+  pVersion->timeStamp = (unsigned char) DSLHAL_VERSION_TIMESTAMP;  
-+}
-+  
-+/********************************************************************************************
-+ * FUNCTION NAME: dslhal_api_pollTrainingStatus()
-+ *
-+ *********************************************************************************************
-+ * DESCRIPTION: code to decode modem status and to start modem training 
-+ * Input: tidsl_t *ptidsl
-+ * 
-+ * Return: modem status   
-+ *         -1    failed
-+ *
-+ ********************************************************************************************/
-+
-+int dslhal_api_pollTrainingStatus(tidsl_t *ptidsl)
-+{
-+  int cmd;
-+  int tag;
-+  int parm1,parm2;
-+  int rc;
-+  unsigned int failState;
-+  static unsigned int pollGhsIndex=0;
-+
-+  /*char *tmp;*/
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+#if SWTC
-+  DEV_HOST_tcHostCommDef_t          TCHostCommDef;
-+#endif
-+  
-+  dprintf(5,"dslhal_api_pollTrainingStatus\n");
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
-+                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+#if SWTC
-+  dspOamSharedInterface.tcHostComm_p =(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p, 
-+                                    &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+#endif
-+  
-+  rc = dslhal_support_processTrainingState(ptidsl);
-+  if(rc)
-+    {
-+      dprintf(0,"Error Reading Modem Training State \n");
-+      return DSLHAL_ERROR_MODEMSTATE;
-+    }
-+  rc = dslhal_support_processModemStateBitField(ptidsl);
-+  if(rc)
-+    {
-+      dprintf(0,"Error Reading Modem Training State \n");
-+      return DSLHAL_ERROR_MODEMSTATE;
-+    }
-+  /*
-+  rc = dslhal_support_readDelineationState(ptidsl);
-+  if(rc)
-+    {
-+      dprintf(0,"Error Reading Delineation State \n");
-+      return DSLHAL_ERROR_MODEMSTATE;
-+    }
-+  */
-+  while (dslhal_support_readDspMailbox(ptidsl,&cmd, &tag, &parm1, &parm2) == DSLHAL_ERROR_NO_ERRORS )
-+    {
-+    dprintf(4,"mailbox message: 0x%x\n", cmd);
-+    /*    
-+    for(rc=0;rc<8;rc++)
-+      {
-+        dslhal_support_readTextMailbox(ptidsl,&msg1, &msg2);
-+      }
-+    */ 
-+
-+    if (cmd == DSP_IDLE) 
-+      {
-+      dprintf(4,"DSP_IDLE\n");
-+      ptidsl->lConnected=0; 
-+      hybrid_selected=888;
-+      /* add code for reload overlay pages */
-+      if(ptidsl->bAutoRetrain == 0)
-+       {
-+         while(ptidsl->bOverlayPageLoaded == 0)
-+         {
-+           shim_osClockWait(6400);
-+         }
-+         //dslhal_support_restoreTrainingInfo(ptidsl);
-+         //ptidsl->bOverlayPageLoaded = 1;
-+       }
-+      /* command DSP to ACTREQ */
-+      if(showtimeFlag == TRUE)
-+        {
-+           dslhal_api_resetTrainFailureLog(ptidsl);
-+           dslhal_support_advancedIdleProcessing(ptidsl);
-+           showtimeFlag = FALSE;
-+        }
-+      failState = (unsigned int)parm1;
-+      if(failState!=0)
-+        {
-+          ptidsl->AppData.trainFailStates[ptidsl->AppData.trainFails]=failState;
-+          ptidsl->AppData.trainFails++;
-+          if(ptidsl->AppData.trainFails > 30)
-+             ptidsl->AppData.trainFails=0;
-+        }
-+      for(pollGhsIndex=0;pollGhsIndex<10;pollGhsIndex++)
-+        {
-+          for(rc=0;rc<62;rc++)
-+            ptidsl->AppData.dsl_ghsRxBuf[pollGhsIndex][rc]=0;
-+        }  
-+      pollGhsIndex=0;
-+      rc = dslhal_support_writeHostMailbox(ptidsl,HOST_ACTREQ, 0, 0, 0);
-+      if (rc)
-+        return DSLHAL_ERROR_MAILBOX_WRITE;
-+      }
-+
-+    if(cmd == DSP_ATM_TC_SYNC)
-+      {
-+      dprintf(4,"\nTC_SYNC\n");
-+      showtimeFlag = TRUE;
-+      ptidsl->lConnected=1; 
-+      if(ptidsl->bAutoRetrain == 0 && ptidsl->bOverlayPageLoaded == 1)
-+       {
-+         dslhal_support_clearTrainingInfo(ptidsl);
-+         ptidsl->bOverlayPageLoaded = 0;
-+        }
-+      }
-+    if(cmd == DSP_ACTIVE)
-+      {
-+      dprintf(4,"DSP_ACTIVE");
-+      ptidsl->lConnected=0;
-+      ptidsl->AppData.bState = RSTATE_SHOWTIME;
-+      dprintf(4,"US Connect Rate: %u \n",ptidsl->AppData.USConRate);
-+      dprintf(4,"DS Connect Rate: %u \n",ptidsl->AppData.DSConRate);
-+      }
-+    if(cmd == DSP_ATM_NO_TC_SYNC)
-+      {
-+      dprintf(4,"\nTC_NOSYNC\n");
-+      ptidsl->lConnected=0; 
-+      }
-+    if(cmd == DSP_DGASP)
-+      {
-+      dprintf(0,"\n GASP!!! \n");
-+      }          
-+    if(cmd == DSP_OVERLAY_END)
-+       {
-+         dprintf(4,"Overlay Page Done %d \n",tag);
-+         rc = dslhal_support_checkOverlayPage(ptidsl,tag);
-+         if(rc == DSLHAL_ERROR_OVERLAY_CORRUPTED)
-+          {
-+            dprintf(0,"Overlay Page: %d CORRUPTED \n",tag);
-+            return (0-DSLHAL_ERROR_OVERLAY_CORRUPTED);
-+          }
-+        }   
-+    if(cmd == DSP_HYBRID)
-+       {
-+         dprintf(2,"Hybrid Metrics Available: %d\n",tag);
-+         hybrid_selected = tag;
-+       }
-+    if(cmd == DSP_DGASP)
-+      {
-+      dprintf(0,"\n GASP!!! \n");
-+      }   
-+    if(cmd == DSP_XMITBITSWAP)
-+      {
-+       dslhal_support_aocBitSwapProcessing(ptidsl,0);
-+      }
-+    if(cmd == DSP_RCVBITSWAP)
-+      {
-+       dslhal_support_aocBitSwapProcessing(ptidsl,1);
-+      }
-+    if(cmd == DSP_GHSMSG)
-+      {
-+       dprintf(3,"Ghs Message Received, bytes: %d \n",tag);
-+       dprintf(3,"Addr: 0x%x\n",dspOamSharedInterface.ghsDspRxBuf_p);
-+       if(pollGhsIndex > 9)
-+           pollGhsIndex=0;
-+       rc = dslhal_support_blockRead((void *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.ghsDspRxBuf_p), &ptidsl->AppData.dsl_ghsRxBuf[pollGhsIndex++][0], tag);
-+      }
-+    if(cmd == DSP_CRATES1)
-+      {
-+       dprintf(3,"DSP C-Rates1 Data Ready \n");
-+       rc = dslhal_support_gatherRateMessages(ptidsl);
-+      }
-+    if(cmd == DSP_SNR)
-+      {
-+       dprintf(3,"DSP SNR Data Ready \n");
-+       rc = dslhal_support_gatherSnrPerBin(ptidsl,tag);
-+      }
-+    if(cmd == DSP_EOC)
-+      {
-+       dprintf(3,"DSP_EOC message \n"); 
-+       rc = dslhal_support_gatherEocMessages(ptidsl,tag,parm1,parm2);
-+      }
-+    
-+    if(cmd == DSP_TRAINING_MSGS)
-+      {
-+       dprintf(3,"DSP_TRAINING_MSGS \n"); 
-+       rc = dslhal_support_gatherAdsl2Messages(ptidsl,tag,parm1,parm2);
-+      }
-+    }
-+  dprintf(6,"dslhal_api_pollTrainingStatus done\n");
-+  return(ptidsl->AppData.bState);
-+  
-+}  /* end of dslhal_api_pollTrainingStatus() */
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_handleTrainingInterrupt()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Code to handle ax5 hardware interrupts
-+*
-+* Input: tidsl_t *ptidsl
-+*        int *pMsg, pointer to returned hardware messages. Each byte represent a messge
-+*        int *pTag, pointer to returned hardware message tags. Each byte represent a tag.
-+* Return: 0    success  
-+*         1    failed
-+*
-+********************************************************************************************/
-+int dslhal_api_handleTrainingInterrupt(tidsl_t *ptidsl, int intrSource)
-+{
-+  int cmd;
-+  int tag;
-+  int parm1,parm2;
-+  unsigned int msg1;
-+  unsigned int msg2;
-+  int rc;
-+  unsigned int failState;
-+  static unsigned int interruptGhsIndex=0;
-+    /*char *tmp;*/
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+#if SWTC
-+  DEV_HOST_tcHostCommDef_t          TCHostCommDef;
-+#endif
-+  dprintf(6,"dslhal_api_handleTrainingInterrupt\n");
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
-+                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+#if SWTC
-+  dspOamSharedInterface.tcHostComm_p =(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p, 
-+                                    &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+#endif
-+  
-+  if(intrSource & MASK_BITFIELD_INTERRUPTS)
-+    {
-+      dspOamSharedInterface.modemStateBitField_p =(DEV_HOST_modemStateBitField_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemStateBitField_p);
-+      rc = dslhal_support_processTrainingState(ptidsl);
-+      if(rc)
-+       {
-+        dprintf(0,"Error Reading Modem Training State \n");
-+        return DSLHAL_ERROR_MODEMSTATE;
-+        }
-+       rc = dslhal_support_processModemStateBitField(ptidsl);
-+       if(rc)
-+       {
-+        dprintf(0,"Error Reading Modem Training State \n");
-+        return DSLHAL_ERROR_MODEMSTATE;
-+        }
-+    }
-+  if(intrSource & MASK_MAILBOX_INTERRUPTS)
-+    {
-+      /*
-+       rc = dslhal_support_readDelineationState(ptidsl); 
-+       if(rc)
-+       {
-+         dprintf(0,"Error Reading Delineation State \n");
-+         return DSLHAL_ERROR_MODEMSTATE;
-+        }
-+      */
-+       while (dslhal_support_readDspMailbox(ptidsl,&cmd, &tag, &parm1, &parm2) == DSLHAL_ERROR_NO_ERRORS )
-+       {
-+         dprintf(4,"mailbox message: 0x%x\n", cmd);
-+         /*    
-+         for(rc=0;rc<8;rc++)
-+         {
-+           dslhal_support_readTextMailbox(ptidsl,&msg1, &msg2);
-+         }
-+          */ 
-+         if (cmd == DSP_IDLE) 
-+         {
-+           dprintf(4,"DSP_IDLE\n");
-+           ptidsl->lConnected=0;
-+           hybrid_selected=888;
-+           if(showtimeFlag == TRUE)
-+           {
-+             dslhal_api_resetTrainFailureLog(ptidsl);
-+             dslhal_support_advancedIdleProcessing(ptidsl);
-+             showtimeFlag = FALSE;
-+            }
-+           failState = (unsigned int)parm1;
-+           if(failState!=0)
-+           {
-+             ptidsl->AppData.trainFailStates[ptidsl->AppData.trainFails]=failState;
-+             ptidsl->AppData.trainFails++;
-+             if(ptidsl->AppData.trainFails > 30)
-+               ptidsl->AppData.trainFails=0;
-+            }
-+           for(interruptGhsIndex=0;interruptGhsIndex<10;interruptGhsIndex++)
-+             {
-+               for(rc=0;rc<62;rc++)
-+                 ptidsl->AppData.dsl_ghsRxBuf[interruptGhsIndex][rc]=0;
-+             }  
-+           interruptGhsIndex=0;
-+
-+           /* add code for reload overlay pages */
-+           if(ptidsl->bAutoRetrain == 0 && ptidsl->bOverlayPageLoaded == 0)
-+             {
-+             dslhal_support_restoreTrainingInfo(ptidsl);
-+             ptidsl->bOverlayPageLoaded = 1;
-+             }
-+           /* command DSP to ACTREQ */
-+           rc = dslhal_support_writeHostMailbox(ptidsl, HOST_ACTREQ, 0, 0, 0);
-+           if (rc)
-+             return DSLHAL_ERROR_MAILBOX_WRITE;
-+         }
-+         if(cmd == DSP_ATM_TC_SYNC)
-+           {
-+           dprintf(4,"\nTC_SYNC\n");
-+           showtimeFlag = TRUE;
-+           ptidsl->lConnected=1;
-+           if(ptidsl->bAutoRetrain == 0 && ptidsl->bOverlayPageLoaded == 1)
-+             {
-+             dslhal_support_clearTrainingInfo(ptidsl);
-+             ptidsl->bOverlayPageLoaded = 0;
-+             }
-+           }
-+         if(cmd == DSP_ACTIVE)
-+           {
-+             ptidsl->lConnected=0;
-+             ptidsl->AppData.bState = RSTATE_SHOWTIME;
-+             dprintf(4,"DSP_ACTIVE");
-+             dprintf(4,"US Connect Rate: %u \n",ptidsl->AppData.USConRate);
-+             dprintf(4,"DS Connect Rate: %u \n",ptidsl->AppData.DSConRate);
-+           }
-+         if(cmd == DSP_ATM_NO_TC_SYNC)
-+           {
-+             dprintf(4,"\nTC_NOSYNC\n");
-+             ptidsl->lConnected=0;
-+             /* add code for reload overlay pages */
-+           }
-+         if(cmd == DSP_OVERLAY_END)
-+           {
-+             dprintf(4,"Overlay Page Done %d \n",tag);
-+             rc = dslhal_support_checkOverlayPage(ptidsl,tag);
-+             if(rc == DSLHAL_ERROR_OVERLAY_CORRUPTED)
-+               {
-+                 dprintf(4,"Overlay Page: %d CORRUPTED \n",tag);
-+                 return(0-DSLHAL_ERROR_OVERLAY_CORRUPTED);
-+               }
-+           }
-+         if(cmd == DSP_HYBRID)
-+           {
-+             dprintf(2,"Hybrid Metrics Available\n");
-+             hybrid_selected = tag;
-+           }
-+         if(cmd == DSP_XMITBITSWAP)
-+           {
-+            rc = dslhal_support_aocBitSwapProcessing(ptidsl,0);
-+           }
-+         if(cmd == DSP_RCVBITSWAP)
-+           {
-+            rc = dslhal_support_aocBitSwapProcessing(ptidsl,1);
-+           }
-+         if(cmd == DSP_GHSMSG)
-+           {
-+            dprintf(3,"Ghs Message Received, bytes: %d \n",tag);
-+            dprintf(3,"Addr: 0x%x\n",dspOamSharedInterface.ghsDspRxBuf_p);
-+            if(interruptGhsIndex > 9)
-+              interruptGhsIndex=0;
-+            rc = dslhal_support_blockRead((void *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.ghsDspRxBuf_p), &ptidsl->AppData.dsl_ghsRxBuf[interruptGhsIndex++][0], tag);
-+            }
-+         if(cmd == DSP_CRATES1)
-+          {
-+           dprintf(3,"DSP C-Rates1 Data Ready \n");
-+           rc = dslhal_support_gatherRateMessages(ptidsl);
-+          }
-+         if(cmd == DSP_SNR)
-+          {
-+           dprintf(3,"DSP SNR Data Ready \n");
-+           rc = dslhal_support_gatherSnrPerBin(ptidsl,tag);
-+          }
-+         if(cmd == DSP_EOC)
-+          {
-+           dprintf(3,"DSP_EOC message \n");
-+           rc = dslhal_support_gatherEocMessages(ptidsl,tag,parm1,parm2);
-+          }
-+         if(cmd == DSP_TRAINING_MSGS)
-+          {
-+           dprintf(3,"DSP_TRAINING_MSGS \n"); 
-+           rc = dslhal_support_gatherAdsl2Messages(ptidsl,tag,parm1,parm2);
-+          }
-+        }       
-+     
-+       dslhal_support_readTextMailbox(ptidsl,&msg1, &msg2);
-+       dprintf(5,"Text Message Part1: 0x%x \t Text Message Part2: 0x%x \n",msg1,msg2);
-+    }     
-+  dprintf(6,"dslhal_api_handleTrainingInterrupt done\n");
-+  return(ptidsl->AppData.bState);
-+} /* end of dslhal_api_handleTrainingInterrupt() */
-+
-+  
-+
-+
-+/******************************************************************************************    
-+ * FUNCTION NAME:    dslhal_api_dslRetrain(tidsl_t *ptidsl)    
-+ *    
-+ *******************************************************************************************    
-+ * DESCRIPTION: This fuction sends CMD_ACTREQ to the DSP to issue a retrain    
-+ *    
-+ * INPUT:  PITIDSLHW_T *ptidsl    
-+ *           
-+ * RETURN: 0 SUCCESS    
-+ *         1 FAILED    
-+ *      
-+ *****************************************************************************************/    
-+unsigned int dslhal_api_dslRetrain(tidsl_t *ptidsl)
-+{
-+   int rc; 
-+   
-+   dprintf(5, "dslhal_cfg_dslRetrain \n"); 
-+   rc = dslhal_support_writeHostMailbox(ptidsl, HOST_QUIET, 0, 0, 0); 
-+   if(rc)
-+    {  
-+      dprintf(1,"dslhal_cfg_dslRetrain failed\n");  
-+      return DSLHAL_ERROR_CTRL_API_FAILURE;  
-+    }  
-+    return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************    
-+ * FUNCTION NAME:    dslhal_api_sendQuiet(tidsl_t *ptidsl)    
-+ *    
-+ *******************************************************************************************    
-+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP    
-+ *    
-+ * INPUT:  PITIDSLHW_T *ptidsl    
-+ *           
-+ * RETURN: 0 SUCCESS    
-+ *         1 FAILED    
-+ *      
-+ *****************************************************************************************/    
-+unsigned int dslhal_api_sendQuiet(tidsl_t *ptidsl)
-+{
-+   int rc; 
-+   
-+   dprintf(5, "dslhal_api_sendQuiet\n"); 
-+   rc = dslhal_support_writeHostMailbox(ptidsl, HOST_QUIET, 0, 0, 0); 
-+   if(rc)
-+    {  
-+      dprintf(1,"dslhal_api_sendQuiet failed\n");  
-+      return DSLHAL_ERROR_CTRL_API_FAILURE;    
-+    }  
-+    return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************     
-+ * FUNCTION NAME:    dslhal_api_sendIdle(tidsl_t *ptidsl)     
-+ *     
-+ *******************************************************************************************     
-+ * DESCRIPTION: This fuction sends the CMD_IDLE message to the DSP     
-+ *     
-+ * INPUT:  PITIDSLHW_T *ptidsl     
-+ *            
-+ * RETURN: 0 SUCCESS     
-+ *         1 FAILED     
-+ *       
-+ *****************************************************************************************/     
-+unsigned int dslhal_api_sendIdle(tidsl_t *ptidsl) 
-+{ 
-+   int rc;  
-+    
-+   dprintf(5, "dslhal_api_sendIdle\n");  
-+   rc = dslhal_support_writeHostMailbox(ptidsl, HOST_IDLE, 0, 0, 0);  
-+   if(rc) 
-+     {   
-+      dprintf(1,"dslhal_api_sendIdle failed\n");   
-+      return DSLHAL_ERROR_CTRL_API_FAILURE;    
-+     }   
-+    return DSLHAL_ERROR_NO_ERRORS; 
-+} 
-+
-+/******************************************************************************************    
-+ * FUNCTION NAME:    dslhal_api_sendDgasp(tidsl_t *ptidsl)    
-+ *    
-+ *******************************************************************************************    
-+ * DESCRIPTION: This fuction sends the HOST_DGASP message to the DSP    
-+ *    
-+ * INPUT:  PITIDSLHW_T *ptidsl    
-+ *           
-+ * RETURN: 0 SUCCESS    
-+ *         1 FAILED    
-+ *      
-+ *****************************************************************************************/    
-+unsigned int dslhal_api_sendDgasp(tidsl_t *ptidsl)
-+{
-+   int rc; 
-+   
-+   dprintf(5, "dslhal_api_sendDgasp\n"); 
-+   rc = dslhal_support_writeHostMailbox(ptidsl, HOST_DGASP, 0, 0, 0); 
-+   if(rc)
-+    {  
-+      dprintf(1,"dslhal_api_sendDgasp failed\n");  
-+      return DSLHAL_ERROR_CTRL_API_FAILURE;    
-+    }  
-+    return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_setTrainingMode(tidsl_t *ptidsl,unsigned int trainmode)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Desired Training Mode {None/Multimode/G.dmt/lite
-+*
-+* INPUT:  PITIDSLHW_T *ptidsl
-+*         unsigned int trainmode :Should be between 0 and 4; 0:No Mode 1:Multimode
-+*                                 2: T1.413, 3:G.dmt, 4: G.lite
-+* RETURN: 0 SUCCESS
-+*         1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setTrainingMode(tidsl_t *ptidsl,unsigned int trainmode)
-+{
-+   DEV_HOST_oamWrNegoParaDef_t NegoPara;
-+   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+   int rc;
-+   dprintf(5," dslhal_api_setTrainingMode()\n");
-+   if(trainmode>255)
-+     {
-+       dprintf(3,"Invalid Value for Desired Training Mode (must be <255)\n");
-+       return DSLHAL_ERROR_INVALID_PARAM;
-+     }
-+
-+   if(!ptidsl)
-+    {
-+      dprintf(3, "Error: PTIDSL pointer invalid\n");
-+      return DSLHAL_ERROR_INVALID_PARAM;
-+    }
-+
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
-+                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+
-+  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+
-+   rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  /* Enum Translation to maintain backwards compatibility for train modes */
-+  if(trainmode == DSLTRAIN_MULTI_MODE)
-+    trainmode = MULTI_MODE;
-+  if(trainmode == DSLTRAIN_T1413_MODE)
-+    trainmode = T1413_MODE;
-+  if(trainmode == DSLTRAIN_GDMT_MODE)
-+    trainmode = GDMT_MODE;
-+   
-+  NegoPara.stdMode = trainmode;
-+  dprintf(5,"Train Mode: 0x%x\n",trainmode); 
-+  rc = dslhal_support_blockWrite(&NegoPara,(PVOID)dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+  if(rc)
-+    return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ 
-+  dprintf(5," dslhal_api_setTrainingMode() Done\n");
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_getDspVersion
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This routine supply AX5 daugther card DSP version.
-+*
-+* INPUT:  tidsl_t * ptidsl
-+*         void *pVer, DSP version struct is returned starting at this pointer
-+*         
-+* RETURN:  0 --succeeded
-+*          1 --Failed
-+* Note: See verdef_u.h for version structure definition.
-+*****************************************************************************************/
-+int dslhal_api_getDspVersion(tidsl_t *ptidsl, void  *pVer)
-+{
-+  /*  DEV_HOST_dspVersionDef_t  dspVersion; */
-+   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+   int rc;
-+   dprintf(5, "dslhal_api_getDspVersion\n");
-+   if(!ptidsl)
-+     {
-+       dprintf(3, "Error: PTIDSL pointer invalid\n");
-+       return DSLHAL_ERROR_INVALID_PARAM;
-+     }
-+   if(!pVer)
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   
-+   *(unsigned int *) pVer = 0;
-+ 
-+   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+   
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   
-+   dspOamSharedInterface.datapumpVersion_p = (DEV_HOST_dspVersionDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.datapumpVersion_p);
-+   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.datapumpVersion_p,
-+                                      pVer, sizeof(dspVer));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+  pVer = (DEV_HOST_dspVersionDef_t *)(dslhal_support_byteSwap32((unsigned int)pVer)); 
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_gatherStatistics()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Read statistical infromation from ax5 modem daugter card. 
-+* Input: tidsl_t *ptidsl
-+* 
-+* Return: 0    success
-+*         1    failed
-+*
-+********************************************************************************************/
-+void dslhal_api_gatherStatistics(tidsl_t * ptidsl)
-+{
-+  int rc,optIdxU,optIdxD,i; 
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  DEV_HOST_dspWrNegoParaDef_t   rateparms;
-+  DEV_HOST_oamWrNegoParaDef_t   configParms;
-+  DEV_HOST_modemStatsDef_t      StatisticsDef;
-+  DEV_HOST_errorStats_t usIntlvError, usFastError, dsIntlvError, dsFastError;
-+  DEV_HOST_atmStats_t           atmStats;
-+  DEV_HOST_usAtmStats_t         usAtmStats0, usAtmStats1;
-+  DEV_HOST_dsAtmStats_t         dsAtmStats0,dsAtmStats1;
-+  DEV_HOST_dspWrSuperFrameCntDef_t   SuperFrameCnt;
-+  DEV_HOST_msg_t                atuc_msg, aturMsg;
-+  DEV_HOST_eocVarDef_t          eocVar;
-+  DEV_HOST_dspWrSharedTables_t  sharedTables;
-+  DEV_HOST_phyPerf_t            phyPerf;
-+  unsigned char                 usBits[64],dsBits[256];
-+  unsigned char                 dsPowerCutBack;
-+  int                           usNumLoadedTones=0, dsNumLoadedTones=0;
-+
-+  dprintf(5, "dslhal_api_gatherStatistics\n");
-+  
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+  
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
-+                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+  if(!ptidsl->bStatisticsInitialized && ptidsl->lConnected == LINE_CONNECTED)
-+  {
-+    dslhal_api_initStatistics(ptidsl);
-+    ptidsl->bStatisticsInitialized = TRUE;
-+  }
-+
-+  dspOamSharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteNegoParams_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteNegoParams_p, 
-+                               &rateparms, sizeof(DEV_HOST_dspWrNegoParaDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+  if(!rc) 
-+    {    
-+      /* trained mode */
-+    ptidsl->AppData.dsl_modulation = (unsigned int)rateparms.trainMode;
-+    if(rateparms.trainMode == T1413_MODE)
-+      ptidsl->AppData.dsl_modulation = DSLTRAIN_T1413_MODE;
-+    if(rateparms.trainMode == GDMT_MODE)
-+      ptidsl->AppData.dsl_modulation = DSLTRAIN_GDMT_MODE;
-+      /* rate */
-+    /*    shim_osMoveMemory((void *)ptidsl->AppData.bCRates1, (void *)rateparms.cRates1, 120); */
-+    ptidsl->AppData.bCRates2 = rateparms.cRates2;
-+    /*    shim_osMoveMemory((void *)ptidsl->AppData.bRRates1, (void *)rateparms.rRates1, 44); */
-+    ptidsl->AppData.bRRates2 = rateparms.rRates2;
-+    shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs1, (void *)rateparms.cMsgs1, 6);
-+    shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs2, (void *)rateparms.cMsgs2, 4);
-+    shim_osMoveMemory((void *)ptidsl->AppData.bRMsgs2, (void *)rateparms.rMsgs2, 4);
-+    ptidsl->AppData.atucVendorId = (unsigned int)rateparms.atucVendorId;
-+    ptidsl->AppData.lineLength = (unsigned int)dslhal_support_byteSwap16((unsigned short)rateparms.lineLength);
-+    ptidsl->AppData.atucRevisionNum = (unsigned int)rateparms.atucGhsRevisionNum;         
-+    ptidsl->AppData.usLineAttn = (ptidsl->AppData.bCMsgs2[3] >>2)&0x003f;
-+    ptidsl->AppData.usMargin = (ptidsl->AppData.bCMsgs2[2])&0x001f;
-+    
-+    if((rateparms.cRates2 & 0x0f) == 0x01) 
-+      optIdxU = 0;
-+    else if((rateparms.cRates2 & 0x0f) == 0x02)  
-+      optIdxU = 1;
-+    else if((rateparms.cRates2 & 0x0f) == 0x04) 
-+      optIdxU = 2;
-+    else if((rateparms.cRates2 & 0x0f) == 0x08)  
-+      optIdxU = 3;
-+    else 
-+      optIdxU = -1;
-+    
-+    dprintf(5, "optIdxU=%d\n", optIdxU);
-+   
-+    /* Obtain the US Rates using Opt# and CRates1 Table */
-+    /* Rate(US) = [Bf(LS0) + Bi(LS0)]*32                */
-+    if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE)
-+      ptidsl->AppData.USConRate = ((rateparms.cRates1[optIdxU][CRATES1_BF_LS0] + rateparms.cRates1[optIdxU][CRATES1_BI_LS0]) * 32);
-+    else
-+      ptidsl->AppData.USConRate =  32 * dslhal_support_byteSwap16((unsigned short)rateparms.adsl2USRate);
-+
-+    ptidsl->AppData.USPeakCellRate = ptidsl->AppData.USConRate; 
-+    
-+    if(((rateparms.cRates2 >> 4) & 0x0f) == 0x01) 
-+      optIdxD = 0;
-+    else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x02)  
-+      optIdxD = 1;
-+    else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x04) 
-+      optIdxD = 2;
-+    else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x08)  
-+      optIdxD = 3;
-+    else 
-+      optIdxD = -1;
-+    /* Obtain the DS Rates using Opt# and CRates1 Table */
-+    /* Rate(DS) = [Bf(AS0) + Bi(AS0)]*32                */
-+    if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE)
-+      ptidsl->AppData.DSConRate =  (((rateparms.cRates1[optIdxD][CRATES1_BF_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BF_DSRS]&0x80)<<1))+ (rateparms.cRates1[optIdxD][CRATES1_BI_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BI_DSRS]&0x80)<<1)))* 32);
-+    else
-+      ptidsl->AppData.DSConRate = dslhal_support_byteSwap16((unsigned short)rateparms.adsl2DSRate);
-+
-+    dprintf(5, "ptidsl->AppData.wDSConRate=%d\n", ptidsl->AppData.DSConRate);
-+    /* Determine which Path has Modem Trained with */
-+    if((rateparms.cRates1[optIdxU][CRATES1_BF_LS0]) && (rateparms.cRates1[optIdxD][CRATES1_BF_AS0]))
-+      ptidsl->AppData.TrainedPath = FAST_PATH;
-+    else
-+      ptidsl->AppData.TrainedPath = INTERLEAVED_PATH;
-+
-+    /* Set the mode in which the modem is trained */
-+    ptidsl->AppData.TrainedMode = (unsigned int)rateparms.trainMode;
-+    if(rateparms.trainMode == T1413_MODE)
-+      ptidsl->AppData.TrainedMode = DSLTRAIN_T1413_MODE;
-+    if(rateparms.trainMode == GDMT_MODE)
-+      ptidsl->AppData.TrainedMode = DSLTRAIN_GDMT_MODE;
-+
-+    if(ptidsl->AppData.TrainedPath == FAST_PATH)
-+       ptidsl->AppData.dsFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_DSRS]&0x1f);
-+    else
-+       ptidsl->AppData.dsIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_DSRS]&0x1f);
-+    ptidsl->AppData.dsSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0x1f);
-+    ptidsl->AppData.dsInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_DSI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0xc0)<<2));
-+
-+    if(ptidsl->AppData.TrainedPath == FAST_PATH)
-+       ptidsl->AppData.usFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_USRS]&0x1f);
-+    else
-+       ptidsl->AppData.usIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_USRS]&0x1f);
-+    ptidsl->AppData.usSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0x1f);
-+    ptidsl->AppData.usInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_USI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0xc0)<<2));
-+    }
-+
-+  dspOamSharedInterface.modemStats_p = (DEV_HOST_modemStatsDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemStats_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemStats_p,&StatisticsDef, sizeof(DEV_HOST_modemStatsDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+  /* Populate the Error Structure Variables */
-+
-+  /* US Interleave Path Error Statistics */
-+
-+  /* Change the endianness of the Pointer */
-+  StatisticsDef.usErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsIntlv_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsIntlv_p,&usIntlvError, (sizeof(DEV_HOST_errorStats_t)));
-+  
-+  if (rc) 
-+    return;
-+
-+  /* DS Interleave Path Error Statistics */
-+
-+  /* Change the endianness of the Pointer */
-+  StatisticsDef.dsErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsIntlv_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsIntlv_p,&dsIntlvError, (sizeof(DEV_HOST_errorStats_t)));
-+  
-+  if (rc) 
-+    return;
-+
-+  /* US Fast Path Error Statistics */
-+
-+  /* Change the endianness of the Pointer */
-+  StatisticsDef.usErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsFast_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsFast_p,&usFastError, (sizeof(DEV_HOST_errorStats_t)));
-+  
-+  if (rc) 
-+    return;
-+
-+  /* DS Fast Path Error Statistics */
-+
-+  /* Change the endianness of the Pointer */
-+  StatisticsDef.dsErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsFast_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsFast_p,&dsFastError, (sizeof(DEV_HOST_errorStats_t)));
-+  
-+  if (rc) 
-+    return;
-+  if(!rc) 
-+  {
-+    if(ptidsl->AppData.bState > 2)
-+    {
-+      /* Get CRC Errors Stats for both US and DS */
-+      ptidsl->AppData.dsICRC_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.crcErrors);
-+      ptidsl->AppData.dsFCRC_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.crcErrors);
-+      ptidsl->AppData.usICRC_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.crcErrors);
-+      ptidsl->AppData.usFCRC_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.crcErrors);
-+      /* Get FEC Errors Stats for both US and DS */
-+      ptidsl->AppData.dsIFEC_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.fecErrors);
-+      ptidsl->AppData.dsFFEC_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.fecErrors);
-+      ptidsl->AppData.usIFEC_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.fecErrors);
-+      ptidsl->AppData.usFFEC_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.fecErrors);
-+      /* Get NCD Errors Stats for both US and DS */
-+      ptidsl->AppData.dsINCD_error   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.ncdError);
-+      ptidsl->AppData.dsFNCD_error   = dslhal_support_byteSwap32((unsigned int)dsFastError.ncdError);
-+      ptidsl->AppData.usINCD_error   = dslhal_support_byteSwap32((unsigned int)usIntlvError.ncdError);
-+      ptidsl->AppData.usFNCD_error   = dslhal_support_byteSwap32((unsigned int)usFastError.ncdError);
-+      /* Get LCD Errors Stats for both US and DS */
-+      ptidsl->AppData.dsILCD_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.lcdErrors);
-+      ptidsl->AppData.dsFLCD_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.lcdErrors);
-+      ptidsl->AppData.usILCD_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.lcdErrors);
-+      ptidsl->AppData.usFLCD_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.lcdErrors);
-+      /*Get HEC Errors Stats for both US and DS */
-+      ptidsl->AppData.dsIHEC_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.hecErrors);
-+      ptidsl->AppData.dsFHEC_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.hecErrors);
-+      ptidsl->AppData.usIHEC_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.hecErrors);
-+      ptidsl->AppData.usFHEC_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.hecErrors);
-+
-+      /* Get LOS and SEF error Stats */
-+      ptidsl->AppData.LOS_errors      = dslhal_support_byteSwap32(StatisticsDef.losErrors);            
-+      ptidsl->AppData.SEF_errors      = dslhal_support_byteSwap32(StatisticsDef.sefErrors);
-+      ptidsl->AppData.coLosErrors = dslhal_support_byteSwap32(StatisticsDef.farEndLosErrors);
-+      ptidsl->AppData.coRdiErrors = dslhal_support_byteSwap32(StatisticsDef.farEndRdiErrors);
-+  
-+  dspOamSharedInterface.atmStats_p = (DEV_HOST_atmStats_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmStats_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmStats_p,&atmStats, sizeof(DEV_HOST_atmStats_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+
-+  /* Populate the US/DS ATM Stats Variables */
-+
-+  /* US ATM Statistics */
-+
-+  /* Change the endianness of the Pointer */
-+  atmStats.us0_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us0_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)atmStats.us0_p,&usAtmStats0, (sizeof(DEV_HOST_usAtmStats_t)));
-+  
-+  if (rc) 
-+    return;
-+
-+  atmStats.us1_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us1_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)atmStats.us1_p,&usAtmStats1, (sizeof(DEV_HOST_usAtmStats_t)));
-+  
-+  if (rc) 
-+    return;
-+
-+ /* DS ATM Statistics */
-+
-+  /* Change the endianness of the Pointer */
-+  atmStats.ds0_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds0_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)atmStats.ds0_p,&dsAtmStats0, (sizeof(DEV_HOST_dsAtmStats_t)));
-+  
-+  if (rc) 
-+    return;
-+  atmStats.ds1_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds1_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)atmStats.ds1_p,&dsAtmStats1, (sizeof(DEV_HOST_dsAtmStats_t)));
-+  
-+  if (rc) 
-+    return;
-+
-+      /* Get ATM Stats for both US and DS for Channel 0*/
-+      ptidsl->AppData.usAtm_count[0]     = dslhal_support_byteSwap32(usAtmStats0.goodCount);
-+      ptidsl->AppData.usIdle_count[0]    = dslhal_support_byteSwap32(usAtmStats0.idleCount);
-+#if SWTC
-+      ptidsl->AppData.usPdu_count[0]     = dslhal_support_byteSwap32(usAtmStats0.pduCount);
-+#endif
-+      ptidsl->AppData.dsGood_count[0]    = dslhal_support_byteSwap32(dsAtmStats0.goodCount);
-+      ptidsl->AppData.dsIdle_count[0]    = dslhal_support_byteSwap32(dsAtmStats0.idleCount);
-+#if SWTC
-+      ptidsl->AppData.dsPdu_count[0]     = dslhal_support_byteSwap32(dsAtmStats0.pduCount);
-+#endif
-+      ptidsl->AppData.dsBadHec_count[0]  = dslhal_support_byteSwap32((dsAtmStats0.badHecCount));
-+      ptidsl->AppData.dsOVFDrop_count[0] = dslhal_support_byteSwap32((dsAtmStats0.ovflwDropCount));
-+      /* Get ATM Stats for both US and DS for Channel 1*/
-+      ptidsl->AppData.usAtm_count[1]     = dslhal_support_byteSwap32(usAtmStats1.goodCount);
-+      ptidsl->AppData.usIdle_count[1]    = dslhal_support_byteSwap32(usAtmStats1.idleCount);
-+#if SWTC
-+      ptidsl->AppData.usPdu_count[1]     = dslhal_support_byteSwap32(usAtmStats1.pduCount);
-+#endif
-+      ptidsl->AppData.dsGood_count[1]    = dslhal_support_byteSwap32(dsAtmStats1.goodCount);
-+      ptidsl->AppData.dsIdle_count[1]    = dslhal_support_byteSwap32(dsAtmStats1.idleCount);
-+#if SWTC
-+      ptidsl->AppData.dsPdu_count[1]     = dslhal_support_byteSwap32(dsAtmStats1.pduCount);
-+#endif
-+      ptidsl->AppData.dsBadHec_count[1]  = dslhal_support_byteSwap32((dsAtmStats1.badHecCount));
-+      ptidsl->AppData.dsOVFDrop_count[1] = dslhal_support_byteSwap32((dsAtmStats1.ovflwDropCount));
-+
-+    /* Determine the US and DS Superframe Count */
-+
-+  dspOamSharedInterface.dspWriteSuperFrameCnt_p = (DEV_HOST_dspWrSuperFrameCntDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteSuperFrameCnt_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteSuperFrameCnt_p,&SuperFrameCnt, sizeof(DEV_HOST_dspWrSuperFrameCntDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+      ptidsl->AppData.usSuperFrmCnt   = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntUstrm);
-+      ptidsl->AppData.dsSuperFrmCnt   = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntDstrm);
-+      
-+      /* Determine Frame Mode and Max Frame Mode */
-+
-+  dspOamSharedInterface.atucMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atucMsg_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atucMsg_p,&atuc_msg, sizeof(DEV_HOST_msg_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+
-+  ptidsl->AppData.FrmMode         = (unsigned int)atuc_msg.framingMode;
-+  ptidsl->AppData.MaxFrmMode      = (unsigned int)atuc_msg.maxFrameMode;
-+
-+  /* Determine Gross Gain */
-+
-+  dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,&aturMsg, sizeof(DEV_HOST_msg_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+  ptidsl->AppData.grossGain = (unsigned int)aturMsg.grossGain;
-+
-+      /* Determine DS Line Attenuation & Margin */
-+  dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,&eocVar, sizeof(DEV_HOST_eocVarDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+      ptidsl->AppData.dsLineAttn      = (unsigned int)eocVar.lineAtten;
-+      ptidsl->AppData.dsMargin        = (unsigned int)eocVar.dsMargin;
-+    }
-+  } 
-+
-+  /* Read in the Shared Tables structure */      
-+  dspOamSharedInterface.dspWrSharedTables_p = (DEV_HOST_dspWrSharedTables_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWrSharedTables_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWrSharedTables_p,&sharedTables, sizeof(DEV_HOST_dspWrSharedTables_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+
-+  /* Read the ATU-R Bits and Gains Table */
-+  sharedTables.aturBng_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.aturBng_p);
-+  rc = dslhal_support_blockRead((PVOID)sharedTables.aturBng_p,ptidsl->AppData.rBng,255*2*sizeof(unsigned char));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+  /* Read the ATU-C Bits and Gains Table */
-+  sharedTables.atucBng_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.atucBng_p);
-+  if(ptidsl->netService == 2) /* for Annex_B */
-+    {
-+      rc = dslhal_support_blockRead((PVOID)sharedTables.atucBng_p,ptidsl->AppData.cBng,126*sizeof(unsigned char));
-+      if (rc)
-+       {
-+        dprintf(1,"dslhal_support_blockRead failed\n");
-+        return;
-+        }
-+      for(i=0;i<US_BNG_LENGTH*2;i++)
-+         usBits[i]=0;
-+      for(i=1;i<US_BNG_LENGTH*2;i++)
-+       {
-+        usBits[i]=((ptidsl->AppData.cBng[(i-1)*2])&0xf);
-+        dprintf(5,"Bit #%d : 0x%x\n",i,usBits[i]);
-+        }
-+      for(i=1;i<US_BNG_LENGTH*2;i++)
-+       {
-+        if(usBits[i])
-+        usNumLoadedTones++;
-+        }
-+    }
-+  else
-+    {
-+      rc = dslhal_support_blockRead((PVOID)sharedTables.atucBng_p,ptidsl->AppData.cBng,62*sizeof(unsigned char));
-+      if (rc)
-+       {
-+        dprintf(1,"dslhal_support_blockRead failed\n");
-+        return;
-+        }
-+      for(i=0;i<US_BNG_LENGTH;i++)
-+         usBits[i]=0;
-+      for(i=1;i<US_BNG_LENGTH;i++)
-+       {
-+        usBits[i]=((ptidsl->AppData.cBng[(i-1)*2])&0xf);
-+        dprintf(5,"Bit #%d : 0x%x\n",i,usBits[i]);
-+        }
-+      for(i=1;i<US_BNG_LENGTH;i++)
-+       {
-+        if(usBits[i])
-+        usNumLoadedTones++;
-+        }
-+    }
-+
-+  /* Determine Number U/S of Loaded Tones */
-+
-+  /* U/S Power Computation */
-+  dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
-+                                &phyPerf, sizeof(DEV_HOST_phyPerf_t));
-+  if (rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return;
-+    }  
-+  ptidsl->AppData.currentHybridNum = phyPerf.currentHybridNumUsed;
-+  phyPerf.usAvgGain = dslhal_support_byteSwap32(phyPerf.usAvgGain);
-+  ptidsl->AppData.usTxPower = LOG43125 + phyPerf.usAvgGain + (256*US_NOMINAL_POWER)+log10[usNumLoadedTones-1];
-+  dprintf(7,"Avg Gain: 0x%x  usNumLoadedTones: 0x%x    log: 0x%x\n",phyPerf.usAvgGain, usNumLoadedTones, log10[usNumLoadedTones-1]);
-+  
-+  /* Determine Number D/S of Loaded Tones */
-+  dsBits[0]=0;
-+  for(i=0;i<DS_BNG_LENGTH;i++)
-+    {
-+     dsBits[i]=0;
-+     /* ptidsl->AppData.rBng[i-1]=dslhal_support_byteSwap32((unsigned int)ptidsl->AppData.rBng[i-1]);*/
-+    }
-+  for(i=1;i<DS_BNG_LENGTH;i++)
-+    {
-+     dsBits[i]=((ptidsl->AppData.rBng[(i-1)*2])&0xf);
-+     dprintf(5,"Bit #%d : 0x%x\n",i,dsBits[i]);
-+    }
-+  for(i=1;i<DS_BNG_LENGTH;i++)
-+    {
-+     if(dsBits[i])
-+       dsNumLoadedTones++;
-+    }
-+  /* D/S Power Computation */
-+  dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
-+                                &phyPerf, sizeof(DEV_HOST_phyPerf_t));
-+  if (rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return;
-+    }  
-+  /* D/S Power Cutback */
-+  dsPowerCutBack = (unsigned char)((((ptidsl->AppData.bCMsgs1[0]) >>6) &0x3)+(((ptidsl->AppData.bCMsgs1[1]) &0x1) <<2));
-+  phyPerf.dsAvgGain = dslhal_support_byteSwap32(phyPerf.dsAvgGain);
-+  ptidsl->AppData.dsTxPower = LOG43125 + phyPerf.dsAvgGain + (256*((2*(dsPowerCutBack-1))-52)) + log10[dsNumLoadedTones-1];
-+  dprintf(7,"Avg Gain: %d  dsNumLoadedTones: %d  log: %d  pcb: %d \n",phyPerf.dsAvgGain, dsNumLoadedTones, log10[dsNumLoadedTones-1], dsPowerCutBack);
-+  /* ds bit allocation */
-+  sharedTables.bitAllocTblDstrm_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.bitAllocTblDstrm_p);
-+  rc = dslhal_support_blockRead((PVOID)sharedTables.bitAllocTblDstrm_p,ptidsl->AppData.BitAllocTblDstrm, 256*sizeof(unsigned char));
-+  if(rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed \n");
-+      return;
-+    }
-+
-+    /* us bit allocation */
-+  sharedTables.bitAllocTblUstrm_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.bitAllocTblUstrm_p);
-+  rc = dslhal_support_blockRead((PVOID)sharedTables.bitAllocTblUstrm_p,ptidsl->AppData.BitAllocTblUstrm, 32*sizeof(unsigned char));
-+  if(rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed \n");
-+      return;
-+    }
-+    /* margin per tone */
-+  sharedTables.marginTblDstrm_p = (signed char *)dslhal_support_byteSwap32((unsigned int)sharedTables.marginTblDstrm_p);
-+  rc = dslhal_support_blockRead((PVOID)sharedTables.marginTblDstrm_p,ptidsl->AppData.marginTblDstrm, 256*sizeof(signed char));
-+  if(rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed \n");
-+      return;
-+    }
-+  /* Read Configured Options */
-+  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.oamWriteNegoParams_p, 
-+                               &configParms, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+  else 
-+    {
-+      /* r-Msg1 */
-+    ptidsl->AppData.StdMode = (unsigned int)configParms.stdMode;
-+    if(configParms.stdMode == T1413_MODE)
-+      ptidsl->AppData.StdMode = DSLTRAIN_T1413_MODE;
-+    if(configParms.stdMode == GDMT_MODE)
-+      ptidsl->AppData.StdMode = DSLTRAIN_GDMT_MODE; 
-+    if(configParms.stdMode == MULTI_MODE)
-+      ptidsl->AppData.StdMode = DSLTRAIN_MULTI_MODE; 
-+
-+    shim_osMoveMemory((void *)ptidsl->AppData.bRMsgs1, (void *)configParms.rMsgs1, 6*sizeof(char));
-+    if((ptidsl->AppData.bRMsgs1[2] & 0x02) == 0x02) 
-+      { 
-+      dprintf(7,"Trellis!\n");
-+      ptidsl->configFlag |= CONFIG_FLAG_TRELLIS;
-+      }
-+    else
-+      ptidsl->configFlag &= ~CONFIG_FLAG_TRELLIS;  
-+    if(ptidsl->AppData.bRMsgs1[2]&0x01)
-+      ptidsl->configFlag |= CONFIG_FLAG_EC;
-+    else
-+      ptidsl->configFlag &= ~CONFIG_FLAG_EC;      
-+    }
-+    return;
-+}
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_initStatistics()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: init statistical information of ax5 modem daugter card. 
-+*
-+* Input: tidsl_t *ptidsl
-+* 
-+* Return: NULL
-+*         
-+********************************************************************************************/
-+void dslhal_api_initStatistics(tidsl_t * ptidsl)
-+{
-+  int rc;
-+  /*TCHostCommDef TCHostCommParms; */
-+  int optIdxU, optIdxD;
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  DEV_HOST_dspWrNegoParaDef_t   rateparms;
-+  DEV_HOST_modemStatsDef_t      StatisticsDef;
-+  DEV_HOST_errorStats_t usIntlvError, usFastError, dsIntlvError, dsFastError;
-+  DEV_HOST_atmStats_t           atmStats;
-+  DEV_HOST_usAtmStats_t         usAtmStats0, usAtmStats1;
-+  DEV_HOST_dsAtmStats_t         dsAtmStats0,dsAtmStats1;
-+  DEV_HOST_dspWrSuperFrameCntDef_t   SuperFrameCnt;
-+  DEV_HOST_msg_t                atuc_msg, aturMsg;
-+  DEV_HOST_eocVarDef_t          eocVar;
-+  
-+  dprintf(5, "dslhal_api_initStatistics\n");
-+  
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+  dspOamSharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteNegoParams_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteNegoParams_p,&rateparms, sizeof(DEV_HOST_dspWrNegoParaDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+  if(!rc) 
-+    {
-+      /*    shim_osMoveMemory((void *)ptidsl->AppData.bCRates1, (void *)rateparms.cRates1, SIZE_OF_CRATES1_TABLE); */
-+    ptidsl->AppData.bCRates2 = rateparms.cRates2;
-+    /*    shim_osMoveMemory((void *)ptidsl->AppData.bRRates1, (void *)rateparms.rRates1, 44); */
-+    ptidsl->AppData.bRRates2 = rateparms.rRates2;
-+    shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs1, (void *)rateparms.cMsgs1, 6);
-+    shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs2, (void *)rateparms.cMsgs2, 4);
-+    shim_osMoveMemory((void *)ptidsl->AppData.bRMsgs2, (void *)rateparms.rMsgs2, 4); 
-+    
-+    ptidsl->AppData.atucVendorId = dslhal_support_byteSwap32((unsigned int)rateparms.atucVendorId);
-+    ptidsl->AppData.lineLength = (unsigned int)dslhal_support_byteSwap16((unsigned short)rateparms.lineLength);
-+    ptidsl->AppData.atucRevisionNum = rateparms.atucGhsRevisionNum;
-+    ptidsl->AppData.usLineAttn = (ptidsl->AppData.bCMsgs2[3] >>2)&0x003f;
-+    ptidsl->AppData.usMargin = (ptidsl->AppData.bCMsgs2[2])&0x001f;
-+    
-+    /* Get the UpStream Connection Rate */
-+    /* Based on the Bit Pattern Get the Opt# */
-+    if((rateparms.cRates2 & 0x0f) == 0x01) 
-+      optIdxU = 0;
-+    else if((rateparms.cRates2 & 0x0f) == 0x02)  
-+      optIdxU = 1;
-+    else if((rateparms.cRates2 & 0x0f) == 0x04) 
-+      optIdxU = 2;
-+    else if((rateparms.cRates2 & 0x0f) == 0x08)  
-+      optIdxU = 3;
-+    else 
-+      optIdxU = -1;
-+    dprintf(5, "optIdxU=%d\n", optIdxU);
-+    /* Obtain the US Rates using Opt# and CRates1 Table */
-+    /* Rate(US) = [Bf(LS0) + Bi(LS0)]*32                */
-+    if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE)
-+      ptidsl->AppData.USConRate = ((rateparms.cRates1[optIdxU][CRATES1_BF_LS0] + rateparms.cRates1[optIdxU][CRATES1_BI_LS0]) * 32);
-+    else
-+      ptidsl->AppData.USConRate =  dslhal_support_byteSwap16((unsigned short)rateparms.adsl2USRate);
-+    ptidsl->AppData.USPeakCellRate = ptidsl->AppData.USConRate; 
-+    
-+    /* Get the DownStream Connection Rate */
-+    /* Based on the Bit Pattern Get the Opt# */
-+    if(((rateparms.cRates2 >> 4) & 0x0f) == 0x01) 
-+      optIdxD = 0;
-+    else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x02)  
-+      optIdxD = 1;
-+    else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x04) 
-+      optIdxD = 2;
-+    else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x08)  
-+      optIdxD = 3;
-+    else 
-+      optIdxD = -1;
-+    /* Obtain the DS Rates using Opt# and CRates1 Table */
-+    /* Rate(DS) = [Bf(AS0) + Bi(AS0)]*32                */
-+    if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE)
-+      ptidsl->AppData.DSConRate =  (((rateparms.cRates1[optIdxD][CRATES1_BF_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BF_DSRS]&0x80)<<1))+ (rateparms.cRates1[optIdxD][CRATES1_BI_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BI_DSRS]&0x80)<<1)))* 32);
-+    else
-+      ptidsl->AppData.DSConRate =  dslhal_support_byteSwap16((unsigned short)rateparms.adsl2DSRate);
-+    dprintf(5, "ptidsl->AppData.wDSConRate=%d\n", ptidsl->AppData.DSConRate);
-+    /* Determine which Path has Modem Trained with */
-+    if((rateparms.cRates1[optIdxU][CRATES1_BF_LS0]) && (rateparms.cRates1[optIdxD][CRATES1_BF_AS0]))
-+      ptidsl->AppData.TrainedPath = FAST_PATH;
-+    else
-+      ptidsl->AppData.TrainedPath = INTERLEAVED_PATH;
-+
-+    /* Set the mode in which the modem is trained */
-+    ptidsl->AppData.TrainedMode = (unsigned int)rateparms.trainMode;
-+    if(rateparms.trainMode == T1413_MODE)
-+      ptidsl->AppData.TrainedMode = DSLTRAIN_T1413_MODE;
-+    if(rateparms.trainMode == GDMT_MODE)
-+      ptidsl->AppData.TrainedMode = DSLTRAIN_GDMT_MODE;
-+
-+    if(ptidsl->AppData.TrainedPath == FAST_PATH)
-+       ptidsl->AppData.dsFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_DSRS]&0x1f);
-+    else
-+       ptidsl->AppData.dsIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_DSRS]&0x1f);
-+    ptidsl->AppData.dsSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0x1f);
-+    ptidsl->AppData.dsInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_DSI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0xc0)<<2));
-+
-+    if(ptidsl->AppData.TrainedPath == FAST_PATH)
-+       ptidsl->AppData.usFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_USRS]&0x1f);
-+    else
-+       ptidsl->AppData.usIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_USRS]&0x1f);
-+    ptidsl->AppData.usSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0x1f);
-+    ptidsl->AppData.usInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_USI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0xc0)<<2));
-+    }
-+  
-+  /* get the Statistics itself */
-+
-+  dspOamSharedInterface.modemStats_p = (DEV_HOST_modemStatsDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemStats_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemStats_p,&StatisticsDef, sizeof(DEV_HOST_modemStatsDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return;
-+    }
-+
-+  /* Populate the Error Structure Variables */
-+
-+  /* US Interleave Path Error Statistics */
-+
-+  /* Change the endianness of the Pointer */
-+  StatisticsDef.usErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsIntlv_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsIntlv_p,&usIntlvError, (sizeof(DEV_HOST_errorStats_t)));
-+  
-+  if (rc) 
-+    return;
-+
-+  /* DS Interleave Path Error Statistics */
-+
-+  /* Change the endianness of the Pointer */
-+  StatisticsDef.dsErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsIntlv_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsIntlv_p,&dsIntlvError, (sizeof(DEV_HOST_errorStats_t)));
-+  
-+  if (rc) 
-+    return;
-+
-+  /* US Fast Path Error Statistics */
-+
-+  /* Change the endianness of the Pointer */
-+  StatisticsDef.usErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsFast_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsFast_p,&usFastError, (sizeof(DEV_HOST_errorStats_t)));
-+  
-+  if (rc) 
-+    return;
-+
-+
-+  /* DS Fast Path Error Statistics */
-+
-+  /* Change the endianness of the Pointer */
-+  StatisticsDef.dsErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsFast_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsFast_p,&dsFastError, (sizeof(DEV_HOST_errorStats_t)));
-+  
-+  if (rc) 
-+    return;
-+
-+  if(ptidsl->AppData.bState > 2)
-+  {
-+    /* Get CRC Errors Stats for both US and DS */
-+    ptidsl->AppData.dsICRC_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.crcErrors);
-+    ptidsl->AppData.dsFCRC_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.crcErrors);
-+    ptidsl->AppData.usICRC_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.crcErrors);
-+    ptidsl->AppData.usFCRC_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.crcErrors);
-+    /* Get FEC Errors Stats for both US and DS */
-+    ptidsl->AppData.dsIFEC_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.fecErrors);
-+    ptidsl->AppData.dsFFEC_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.fecErrors);
-+    ptidsl->AppData.usIFEC_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.fecErrors);
-+    ptidsl->AppData.usFFEC_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.fecErrors);
-+    /* Get NCD Errors Stats for both US and DS */
-+    ptidsl->AppData.dsINCD_error   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.ncdError);
-+    ptidsl->AppData.dsFNCD_error   = dslhal_support_byteSwap32((unsigned int)dsFastError.ncdError);
-+    ptidsl->AppData.usINCD_error   = dslhal_support_byteSwap32((unsigned int)usIntlvError.ncdError);
-+    ptidsl->AppData.usFNCD_error   = dslhal_support_byteSwap32((unsigned int)usFastError.ncdError);
-+    /* Get LCD Errors Stats for both US and DS */
-+    ptidsl->AppData.dsILCD_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.lcdErrors);
-+    ptidsl->AppData.dsFLCD_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.lcdErrors);
-+    ptidsl->AppData.usILCD_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.lcdErrors);
-+    ptidsl->AppData.usFLCD_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.lcdErrors);
-+    /*Get HEC Errors Stats for both US and DS */
-+    ptidsl->AppData.dsIHEC_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.hecErrors);
-+    ptidsl->AppData.dsFHEC_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.hecErrors);
-+    ptidsl->AppData.usIHEC_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.hecErrors);
-+    ptidsl->AppData.usFHEC_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.hecErrors);
-+    
-+    /* Get LOS and SEF error Stats */
-+    ptidsl->AppData.LOS_errors      = dslhal_support_byteSwap32(StatisticsDef.losErrors);              
-+    ptidsl->AppData.SEF_errors      = dslhal_support_byteSwap32(StatisticsDef.sefErrors);
-+    ptidsl->AppData.coLosErrors = dslhal_support_byteSwap32(StatisticsDef.farEndLosErrors);
-+    ptidsl->AppData.coRdiErrors = dslhal_support_byteSwap32(StatisticsDef.farEndRdiErrors);    
-+    
-+    dspOamSharedInterface.atmStats_p = (DEV_HOST_atmStats_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmStats_p);
-+    
-+    rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmStats_p,&atmStats, sizeof(DEV_HOST_atmStats_t));
-+    
-+    if (rc)
-+      {
-+        dprintf(1,"dslhal_support_blockRead failed\n");
-+        return;
-+      }
-+
-+    /* Populate the US/DS ATM Stats Variables */
-+    
-+    /* US ATM Statistics */
-+
-+    /* Change the endianness of the Pointer */
-+    atmStats.us0_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us0_p);
-+    
-+    rc = dslhal_support_blockRead((PVOID)atmStats.us0_p,&usAtmStats0, (sizeof(DEV_HOST_usAtmStats_t)));
-+                                       
-+    if (rc) 
-+     return;
-+
-+    /* Change the endianness of the Pointer */
-+    atmStats.us1_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us1_p);
-+    
-+    rc = dslhal_support_blockRead((PVOID)atmStats.us1_p,&usAtmStats1, (sizeof(DEV_HOST_usAtmStats_t)));
-+                                       
-+    if (rc) 
-+     return;
-+
-+
-+  /* DS ATM Statistics */
-+                                       
-+  /* Change the endianness of the Pointer */
-+    atmStats.ds0_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds0_p);
-+    
-+    rc = dslhal_support_blockRead((PVOID)atmStats.ds0_p,&dsAtmStats0, (sizeof(DEV_HOST_dsAtmStats_t)));
-+                                       
-+    if (rc) 
-+    return;
-+
-+  /* Change the endianness of the Pointer */
-+    atmStats.ds1_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds1_p);
-+    
-+    rc = dslhal_support_blockRead((PVOID)atmStats.ds1_p,&dsAtmStats1, (sizeof(DEV_HOST_dsAtmStats_t)));
-+                                       
-+    if (rc) 
-+    return;
-+    /* Get ATM Stats for both US and DS Channel 0*/
-+    ptidsl->AppData.usAtm_count[0]     = dslhal_support_byteSwap32(usAtmStats0.goodCount);
-+    ptidsl->AppData.usIdle_count[0]    = dslhal_support_byteSwap32(usAtmStats0.idleCount);
-+#if SWTC
-+    ptidsl->AppData.usPdu_count[0]     = dslhal_support_byteSwap32(usAtmStats0.pduCount);
-+#endif
-+    ptidsl->AppData.dsGood_count[0]    = dslhal_support_byteSwap32(dsAtmStats0.goodCount);
-+    ptidsl->AppData.dsIdle_count[0]    = dslhal_support_byteSwap32(dsAtmStats0.idleCount);
-+#if SWTC
-+    ptidsl->AppData.dsPdu_count[0]     = dslhal_support_byteSwap32(dsAtmStats0.pduCount);
-+#endif
-+    ptidsl->AppData.dsBadHec_count[0]  = dslhal_support_byteSwap32((dsAtmStats0.badHecCount));
-+    ptidsl->AppData.dsOVFDrop_count[0] = dslhal_support_byteSwap32((dsAtmStats0.ovflwDropCount));
-+
-+    /* Get ATM Stats for both US and DS Channel 1*/
-+    ptidsl->AppData.usAtm_count[1]     = dslhal_support_byteSwap32(usAtmStats1.goodCount);
-+    ptidsl->AppData.usIdle_count[1]    = dslhal_support_byteSwap32(usAtmStats1.idleCount);
-+#if SWTC
-+    ptidsl->AppData.usPdu_count[1]     = dslhal_support_byteSwap32(usAtmStats1.pduCount);
-+#endif
-+    ptidsl->AppData.dsGood_count[1]    = dslhal_support_byteSwap32(dsAtmStats1.goodCount);
-+    ptidsl->AppData.dsIdle_count[1]    = dslhal_support_byteSwap32(dsAtmStats1.idleCount);
-+#if SWTC
-+    ptidsl->AppData.dsPdu_count[1]     = dslhal_support_byteSwap32(dsAtmStats1.pduCount);
-+#endif
-+    ptidsl->AppData.dsBadHec_count[1]  = dslhal_support_byteSwap32((dsAtmStats1.badHecCount));
-+    ptidsl->AppData.dsOVFDrop_count[1] = dslhal_support_byteSwap32((dsAtmStats1.ovflwDropCount));
-+
-+    
-+    /* Determine the US and DS Superframe Count */
-+
-+    dspOamSharedInterface.dspWriteSuperFrameCnt_p = (DEV_HOST_dspWrSuperFrameCntDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteSuperFrameCnt_p);
-+    
-+    rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteSuperFrameCnt_p,&SuperFrameCnt, sizeof(DEV_HOST_dspWrSuperFrameCntDef_t));
-+    
-+    if (rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return;
-+    }
-+
-+    ptidsl->AppData.usSuperFrmCnt   = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntUstrm);
-+    ptidsl->AppData.dsSuperFrmCnt   = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntDstrm);
-+    
-+    /* Determine Frame Mode and Max Frame Mode */
-+    
-+    dspOamSharedInterface.atucMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atucMsg_p);
-+    
-+    rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atucMsg_p,&atuc_msg, sizeof(DEV_HOST_msg_t));
-+  
-+    if (rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return;
-+    }
-+
-+    ptidsl->AppData.FrmMode         = (unsigned int)atuc_msg.framingMode;
-+    ptidsl->AppData.MaxFrmMode      = (unsigned int)atuc_msg.maxFrameMode;
-+    
-+    /* Determine Gross Gain */
-+
-+    dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
-+
-+    rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,&aturMsg, sizeof(DEV_HOST_msg_t));
-+  
-+    if (rc)
-+      {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return;
-+      }
-+    ptidsl->AppData.grossGain = (unsigned int)aturMsg.grossGain;
-+    /* Determine DS Line Attenuation & Margin */
-+    dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
-+    
-+    rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,&eocVar, sizeof(DEV_HOST_eocVarDef_t));
-+    
-+    if (rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return;
-+    }
-+
-+    ptidsl->AppData.dsLineAttn      = (unsigned int)eocVar.lineAtten;
-+    ptidsl->AppData.dsMargin        = (unsigned int)eocVar.dsMargin;
-+    }
-+    
-+#if __HOST_FORINTERNALUSEONLY_R_H__
-+  ptidsl->AppData.BER =  dslhal_INTERNAL_computeAtmBitErrorRate(ptidsl);
-+#endif
-+    dprintf(5, "initstatistics done\n");
-+    return;
-+  }
-+
-+/****************************************************************************************** 
-+ * FUNCTION NAME:    dslhal_api_disableLosAlarm(tidsl_t *ptidsl,unsigned int set) 
-+ * 
-+ ******************************************************************************************* 
-+ * DESCRIPTION: This fuction enables/disables all the LOS alarms 
-+ * 
-+ * INPUT:  PITIDSLHW_T *ptidsl 
-+ *         unsigned int set; //if set is TRUE: LOS Alarms are disabled else enabled
-+ * RETURN: 0 SUCCESS 
-+ *         1 FAILED 
-+ * NOTES:  Currently not supported in any version other than MR4 Patch release..  
-+ *****************************************************************************************/ 
-+unsigned int dslhal_api_disableLosAlarm(tidsl_t *ptidsl,unsigned int set) 
-+{ 
-+   DEV_HOST_oamWrNegoParaDef_t NegoPara;
-+   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+   int rc;
-+   dprintf(5," dslhal_api_setTrainingMode()\n");
-+   if(!ptidsl)
-+    {
-+      dprintf(3, "Error: PTIDSL pointer invalid\n");
-+      return DSLHAL_ERROR_INVALID_PARAM;
-+    }
-+
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
-+                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+
-+  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+
-+   rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  if(set) 
-+    {
-+   NegoPara.disableLosAlarm = TRUE;
-+   /*  NegoPara.marginMonitorTrning = TRUE;
-+       NegoPara.marginMonitorShwtme = TRUE;*/
-+    } 
-+  else
-+    {
-+    NegoPara.disableLosAlarm = FALSE;
-+    /*  NegoPara.marginMonitorTrning = FALSE;
-+        NegoPara.marginMonitorShwtme = FALSE;*/
-+    }
-+
-+  rc = dslhal_support_blockWrite(&NegoPara,(PVOID)dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+  if(rc)
-+    return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+  dprintf(5," dslhal_api_disableLosAlarm() Done\n"); 
-+  return DSLHAL_ERROR_NO_ERRORS; 
-+} 
-+
-+/******************************************************************************************  
-+ * FUNCTION NAME:    dslhal_api_setMarginThreshold(tidsl_t *ptidsl,int threshold)  
-+ *  
-+ *******************************************************************************************  
-+ * DESCRIPTION: This fuction does sets the Margin threshold 
-+ *  
-+ * INPUT:  PITIDSLHW_T *ptidsl  
-+ *         int threshold 
-+ *        
-+ *                                  
-+ * RETURN: 0 SUCCESS  
-+ *         1 FAILED  
-+ *  
-+ *****************************************************************************************/  
-+unsigned int dslhal_api_setMarginThreshold(tidsl_t *ptidsl, int threshold)  
-+{  
-+   DEV_HOST_oamWrNegoParaDef_t NegoPara;  
-+   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+   int rc;  
-+   
-+   dprintf(5," dslhal_ctrl_setThreshold()\n");  
-+    
-+   if(!ptidsl)  
-+     {  
-+      dprintf(3, "Error: PTIDSL pointer invalid\n");  
-+      return DSLHAL_ERROR_INVALID_PARAM;  
-+     }  
-+  
-+   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+
-+  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+
-+
-+   rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+
-+  NegoPara.marginThreshold = threshold;
-+  
-+  rc = dslhal_support_blockWrite(&NegoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+
-+  if(rc)
-+    return DSLHAL_ERROR_MARGIN_API_FAILURE;
-+
-+  dprintf(5," dslhal_api_setThreshold() Done\n");  
-+  return DSLHAL_ERROR_NO_ERRORS;  
-+}  
-+
-+
-+/****************************************************************************************** 
-+ * FUNCTION NAME:    dslhal_api_setMonitorFlags(tidsl_t *ptidsl, unsigned int trainflag,unsigned int shwtflag) 
-+ * 
-+ ******************************************************************************************* 
-+ * DESCRIPTION: This fuction does sets the Margin monitoring flag
-+ * 
-+ * INPUT:  PITIDSLHW_T *ptidsl 
-+ *         unsigned int trainflag
-+ *         unsigned int shwtflag 
-+ *                                 
-+ * RETURN: 0 SUCCESS 
-+ *         1 FAILED 
-+ * 
-+ *****************************************************************************************/ 
-+unsigned int dslhal_api_setMarginMonitorFlags(tidsl_t *ptidsl,unsigned int trainflag,unsigned int shwtflag) 
-+{ 
-+   DEV_HOST_oamWrNegoParaDef_t NegoPara; 
-+   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+   int rc; 
-+  
-+   dprintf(5," dslhal_ctrl_setMonitorFlags()\n"); 
-+   
-+   if(!ptidsl) 
-+     { 
-+      dprintf(3, "Error: PTIDSL pointer invalid\n"); 
-+      return DSLHAL_ERROR_INVALID_PARAM; 
-+     } 
-+
-+   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+
-+  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+
-+
-+   rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+
-+  if (trainflag) 
-+    { 
-+        NegoPara.marginMonitorTrning = TRUE; 
-+    } 
-+  else 
-+    { 
-+        NegoPara.marginMonitorTrning = FALSE; 
-+    } 
-+  if (shwtflag) 
-+    { 
-+        NegoPara.marginMonitorShwtme = TRUE; 
-+    } 
-+  else 
-+    { 
-+        NegoPara.marginMonitorShwtme = FALSE; 
-+    } 
-+ 
-+  rc = dslhal_support_blockWrite(&NegoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+    if(rc)
-+      return DSLHAL_ERROR_MARGIN_API_FAILURE;
-+  dprintf(5," dslhal_api_setMonitorFlags() Done\n"); 
-+  return DSLHAL_ERROR_NO_ERRORS; 
-+} 
-+
-+/******************************************************************************************  
-+ * FUNCTION NAME:    dslhal_api_setEocSerialNumber(tidsl_t *ptidsl,char *SerialNum)  
-+ *  
-+ *******************************************************************************************  
-+ * DESCRIPTION: This fuction Sets the eoc Serial Number  
-+ *  
-+ * INPUT:  PITIDSLHW_T *ptidsl  
-+ *         char *SerialNum : Input eoc Serial Number
-+ *  
-+ * RETURN: 0 SUCCESS  
-+ *         1 FAILED  
-+ *  
-+ *****************************************************************************************/  
-+unsigned int dslhal_api_setEocSerialNumber(tidsl_t *ptidsl,char *SerialNumber)  
-+{  
-+   DEV_HOST_eocVarDef_t eocVar;
-+   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+   int rc;  
-+   dprintf(5," dslhal_api_setEocSerialNumber()\n");  
-+ 
-+   if(!ptidsl) 
-+     { 
-+      dprintf(3, "Error: PTIDSL pointer invalid\n"); 
-+      return DSLHAL_ERROR_INVALID_PARAM; 
-+     } 
-+
-+   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+
-+  dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p, 
-+                               &eocVar, sizeof(DEV_HOST_eocVarDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+   
-+  shim_osMoveMemory(eocVar.serialNumber,SerialNumber,32); 
-+
-+  rc= dslhal_support_blockWrite(&eocVar,dspOamSharedInterface.eocVar_p,sizeof(DEV_HOST_eocVarDef_t)); 
-+    if(rc)
-+      return DSLHAL_ERROR_EOCREG_API_FAILURE;
-+  dprintf(5," dslhal_api_setEocSerialNumber() Done\n");  
-+   
-+  return DSLHAL_ERROR_NO_ERRORS;
-+  
-+}  
-+
-+
-+/****************************************************************************************** 
-+ * FUNCTION NAME:    dslhal_api_setEocVendorId(tidsl_t *ptidsl,char *VendorID) 
-+ * 
-+ ******************************************************************************************* 
-+ * DESCRIPTION: This fuction Sets the eoc Vendor ID 
-+ * 
-+ * INPUT:  PITIDSLHW_T *ptidsl 
-+ *         char *VendorID : Input eoc Vendor ID
-+ * 
-+ * RETURN: 0 SUCCESS 
-+ *         1 FAILED 
-+ * 
-+ *****************************************************************************************/ 
-+unsigned int dslhal_api_setEocVendorId(tidsl_t *ptidsl,char *VendorID) 
-+{ 
-+  DEV_HOST_oamWrNegoParaDef_t NegoPara;  
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  int rc; 
-+  dprintf(5," dslhal_api_setEocVendorId()\n"); 
-+
-+  if(!ptidsl) 
-+    { 
-+      dprintf(3, "Error: PTIDSL pointer invalid\n"); 
-+      return DSLHAL_ERROR_INVALID_PARAM; 
-+    }   
-+  
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+  
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+
-+  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+
-+
-+   rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  
-+  shim_osMoveMemory(NegoPara.gdmtVendorId,VendorID,8);
-+  rc= dslhal_support_blockWrite(&NegoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+    if(rc)
-+      return DSLHAL_ERROR_EOCREG_API_FAILURE;
-+  
-+  dprintf(5," dslhal_api_setEocVendorId() Done\n"); 
-+  return DSLHAL_ERROR_NO_ERRORS; 
-+} 
-+
-+/******************************************************************************************   
-+ * FUNCTION NAME:    dslhal_api_setEocRevisionNumber(tidsl_t *ptidsl,char *RevNum)   
-+ *   
-+ *******************************************************************************************   
-+ * DESCRIPTION: This fuction Sets the eoc Revision Number   
-+ *   
-+ * INPUT:  PITIDSLHW_T *ptidsl   
-+ *         char *RevNum : Input eoc Revision Number 
-+ *   
-+ * RETURN: 0 SUCCESS   
-+ *         1 FAILED   
-+ *   
-+ *****************************************************************************************/   
-+unsigned int dslhal_api_setEocRevisionNumber(tidsl_t *ptidsl,char *RevNumber)   
-+{   
-+
-+   DEV_HOST_eocVarDef_t eocVar;
-+   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+   int rc;  
-+   /*add for UR2 test */
-+   UINT8        selfTestResults[2];
-+   memset(selfTestResults,0x00,sizeof(selfTestResults));
-+   /* add for UR2 test */
-+   dprintf(5," dslhal_api_setEocRevisionNumber()\n");   
-+   
-+  if(!ptidsl)  
-+     {  
-+      dprintf(3, "Error: PTIDSL pointer invalid\n");  
-+      return DSLHAL_ERROR_INVALID_PARAM;  
-+     }  
-+
-+   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+     dprintf(1,"dslhal_support_blockRead failed\n");
-+     return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+
-+  dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p, 
-+                               &eocVar, sizeof(DEV_HOST_eocVarDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  shim_osMoveMemory(eocVar.revNumber,RevNumber,4);
-+  /* add for UR2 test */
-+  shim_osMoveMemory(eocVar.dummy,selfTestResults,2);
-+  /* add for UR2 test */
-+  rc=dslhal_support_blockWrite(&eocVar,dspOamSharedInterface.eocVar_p,sizeof(DEV_HOST_eocVarDef_t)); 
-+    if(rc)
-+      return DSLHAL_ERROR_EOCREG_API_FAILURE;
-+  dprintf(5," dslhal_api_setEocRevisionNumber Done\n");   
-+  return DSLHAL_ERROR_NO_ERRORS;   
-+}   
-+
-+/******************************************************************************************      
-+ * FUNCTION NAME:    dslhal_api_setAturConfig(tidsl_t *ptidsl,char *ATURConfig)      
-+ *      
-+ *******************************************************************************************      
-+ * DESCRIPTION: This fuction Sets the eoc ATUR Config Register  
-+ *      
-+ * INPUT:  PITIDSLHW_T *ptidsl      
-+ *         char *ATURConfig : Input eoc ATUR Config Register    
-+ *      
-+ * RETURN: 0 SUCCESS      
-+ *         1 FAILED      
-+ *      
-+ *****************************************************************************************/      
-+unsigned int dslhal_api_setAturConfig(tidsl_t *ptidsl,char *ATURConfig)
-+{    
-+
-+  DEV_HOST_eocVarDef_t eocVar;
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  int rc;  
-+  dprintf(5," dslhal_api_setAturConfig()\n");    
-+
-+  if(!ptidsl)  
-+     {  
-+      dprintf(3, "Error: PTIDSL pointer invalid\n");  
-+      return DSLHAL_ERROR_INVALID_PARAM;  
-+     }  
-+
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+  
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  
-+  dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
-+  
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,
-+                                     &eocVar, sizeof(DEV_HOST_eocVarDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }  
-+     shim_osMoveMemory(eocVar.aturConfig,ATURConfig,30);
-+   rc= dslhal_support_blockWrite(&eocVar,dspOamSharedInterface.eocVar_p,sizeof(DEV_HOST_eocVarDef_t)); 
-+    if(rc)
-+      return DSLHAL_ERROR_EOCREG_API_FAILURE;
-+  dprintf(5," dslhal_api_setAturConfig() Done\n");    
-+  return DSLHAL_ERROR_NO_ERRORS;   
-+}
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_setRateAdaptFlag(tidsl_t *ptidsl,unsigned int flag)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Rate Adapt Enable Flag
-+*
-+* INPUT:  PITIDSLHW_T *ptidsl
-+*         unsigned int flag; //if flag = TRUE set rateadapt flag else reset it
-+* RETURN: 0 SUCCESS
-+*         1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setRateAdaptFlag(tidsl_t *ptidsl,unsigned int flag)
-+{
-+   DEV_HOST_msg_t aturMsg;
-+   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+   int rc;
-+   dprintf(5," dslhal_api_setRateAdaptFlag()\n");
-+   
-+  if(!ptidsl)  
-+     {  
-+      dprintf(3, "Error: PTIDSL pointer invalid\n");  
-+      return DSLHAL_ERROR_INVALID_PARAM;  
-+     }  
-+
-+   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+   
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   
-+   dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
-+   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,
-+                                      &aturMsg, sizeof(DEV_HOST_msg_t));
-+   if (rc)
-+     {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   
-+   if(flag)
-+     aturMsg.rateAdapt = TRUE;
-+   else
-+     aturMsg.rateAdapt = FALSE;
-+   
-+   rc= dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t)); 
-+   if(rc)
-+     return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+   dprintf(5," dslhal_api_setRateAdaptFlag() Done\n");
-+   return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_setTrellisFlag(tidsl_t *ptidsl,unsigned int flag)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Trellis Coding Enable Flag
-+*
-+* INPUT:  PITIDSLHW_T *ptidsl
-+*         unsigned int flag;  // if flag = TRUE, set trellis flag else reset
-+* RETURN: 0 SUCCESS
-+*         1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setTrellisFlag(tidsl_t *ptidsl,unsigned int flag)
-+{
-+
-+   DEV_HOST_msg_t aturMsg;
-+   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+   DEV_HOST_oamWrNegoParaDef_t negoPara;
-+   int rc;
-+   dprintf(5," dslhal_api_setTrellisFlag()\n");   
-+   if(!ptidsl)
-+     {
-+       dprintf(3, "Error: PTIDSL pointer invalid\n");
-+       return DSLHAL_ERROR_INVALID_PARAM;
-+     }
-+   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+   
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   
-+   dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
-+   rc += dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,&aturMsg, sizeof(DEV_HOST_msg_t));
-+   dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+   rc += dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&negoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+
-+  if(flag)
-+    {
-+      aturMsg.trellis = TRUE;
-+      negoPara.rMsgs1[2] |= 0x02;
-+    }
-+  else
-+    {
-+      aturMsg.trellis = FALSE;
-+      negoPara.rMsgs1[2] &= 0xFD;
-+    }   
-+  rc=0;
-+  rc+=dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t)); 
-+  rc+= dslhal_support_blockWrite(&negoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+  if(rc)
-+     return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+
-+  dprintf(5," dslhal_api_setTrellisFlag() Done\n");
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_setMaxBitsPerCarrier(tidsl_t *ptidsl,unsigned int maxbits)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Maximum bits per carrier value
-+*
-+* INPUT:  PITIDSLHW_T *ptidsl
-+*         unsigned int maxbits : should be a value between 0-15
-+*
-+* RETURN: 0 SUCCESS
-+*         1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setMaxBitsPerCarrier(tidsl_t *ptidsl,unsigned int maxbits)
-+{
-+
-+   DEV_HOST_msg_t aturMsg;
-+   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+   int rc;
-+
-+   dprintf(5," dslhal_api_setMaxBitsPerCarrier()\n");
-+   if(maxbits>15)
-+     {
-+       dprintf(3,"Maximum Number of Bits per carrier cannot exceed 15!\n");
-+       return DSLHAL_ERROR_INVALID_PARAM;
-+     }
-+
-+   if(!ptidsl)
-+    {
-+      dprintf(3, "Error: PTIDSL pointer invalid\n");
-+       return DSLHAL_ERROR_INVALID_PARAM;
-+    }
-+   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+   
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   
-+   dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
-+   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,
-+                                      &aturMsg, sizeof(DEV_HOST_msg_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+
-+  aturMsg.maxBits = maxbits;
-+   
-+   rc=dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t)); 
-+   if(rc)
-+     return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+   dprintf(5," dslhal_api_setMaxBitsPerCarrier() Done\n");
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_setMaxInterleaverDepth(tidsl_t *ptidsl,unsigned int maxdepth)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Maximum Interleave Depth Supported
-+*
-+* INPUT:  PITIDSLHW_T *ptidsl
-+*         unsigned int maxdepth : Should be between 0 and 3 depending on intlv buffer
-+*                                 size 64-512
-+* RETURN: 0 SUCCESS
-+*         1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setMaxInterleaverDepth(tidsl_t *ptidsl,unsigned int maxdepth)
-+{
-+   DEV_HOST_msg_t aturMsg;
-+   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+   int rc;
-+   dprintf(5," dslhal_api_setMaxInterleaverDepth()\n");
-+   if(maxdepth>3)
-+     {
-+       dprintf(3,"Invalid Value for maximum interleave depth (must be <3)\n");
-+       return DSLHAL_ERROR_INVALID_PARAM;
-+     }
-+
-+   if(!ptidsl)
-+    {
-+      dprintf(3, "Error: PTIDSL pointer invalid\n");
-+       return DSLHAL_ERROR_INVALID_PARAM;
-+    }
-+   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+   
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   
-+   dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
-+   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,
-+                                      &aturMsg, sizeof(DEV_HOST_msg_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+
-+  aturMsg.maxIntlvDepth = maxdepth;
-+   
-+   rc=dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t)); 
-+   if(rc)
-+     return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+   dprintf(5," dslhal_api_setMaxInterleaverDepth() Done\n");
-+   return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_acknowledgeInterrupt()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_acknowledgeInterrupt(tidsl_t * ptidsl)
-+{
-+  unsigned int interruptSources=0;
-+  /* Clear out the DSLSS Interrupt Registers to acknowledge Interrupt */
-+  if(DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_SOURCE_REGISTER))&MASK_MAILBOX_INTERRUPTS)
-+    {
-+      DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_CLEAR_REGISTER))|=MASK_MAILBOX_INTERRUPTS;
-+      dprintf(5,"Mailbox Interrupt \n");
-+    }
-+  if(DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_SOURCE_REGISTER))&MASK_BITFIELD_INTERRUPTS)
-+    {
-+      DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_CLEAR_REGISTER))|=MASK_BITFIELD_INTERRUPTS;
-+      dprintf(5,"Bitfield Interrupt \n");
-+    }
-+  if(DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_SOURCE_REGISTER))&MASK_HEARTBEAT_INTERRUPTS)
-+    {
-+      DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_CLEAR_REGISTER))|=MASK_HEARTBEAT_INTERRUPTS;
-+      dprintf(5,"HeartBeat Interrupt \n");
-+    }
-+  interruptSources = dslhal_support_parseInterruptSource(ptidsl);
-+  if(interruptSources < 0)
-+    return DSLHAL_ERROR_INTERRUPT_FAILURE;
-+  else  
-+    return interruptSources;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_disableDspHybridSelect()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_disableDspHybridSelect(tidsl_t * ptidsl,unsigned int disable)
-+{
-+  int rc;
-+  DEV_HOST_phyPerf_t phyPerf;
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+   
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   
-+   dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
-+   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
-+                                      &phyPerf, sizeof(DEV_HOST_phyPerf_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   if(disable==1)
-+     {
-+       phyPerf.disableDspHybridSelect_f = TRUE;
-+       //       hybrid_selected = 888;
-+     }
-+   else
-+     {
-+       phyPerf.disableDspHybridSelect_f = FALSE;
-+       //       hybrid_selected = 888;
-+     }
-+  rc=dslhal_support_blockWrite(&phyPerf,dspOamSharedInterface.phyPerf_p,sizeof(DEV_HOST_phyPerf_t)); 
-+   if(rc)
-+     return DSLHAL_ERROR_HYBRID_API_FAILURE;
-+   else
-+     return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_selectHybrid()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_selectHybrid(tidsl_t * ptidsl,unsigned int hybridNum)
-+{
-+  int rc;
-+  DEV_HOST_phyPerf_t phyPerf;
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  if(hybridNum<1||hybridNum>4)
-+   {
-+     dprintf(3,"Invalid Value for Hybrid Number \n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+
-+  if(!ptidsl)
-+   {
-+     dprintf(3, "Error: PTIDSL pointer invalid\n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+   
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   
-+   dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
-+   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
-+                                      &phyPerf, sizeof(DEV_HOST_phyPerf_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   phyPerf.hostSelectHybridNum = hybridNum;
-+   rc=dslhal_support_blockWrite(&phyPerf,dspOamSharedInterface.phyPerf_p,sizeof(DEV_HOST_phyPerf_t)); 
-+   if(rc)
-+     return DSLHAL_ERROR_HYBRID_API_FAILURE;
-+   else
-+     return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_reportHybridMetrics()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_reportHybridMetrics(tidsl_t * ptidsl,int *metric)
-+{
-+  int rc,i;
-+  DEV_HOST_phyPerf_t phyPerf;
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  if(hybrid_selected>5)
-+    {
-+      dprintf(4,"Hybrid Metrics Not Yet Available \n");
-+    }
-+  if(!ptidsl)
-+   {
-+     dprintf(3, "Error: PTIDSL pointer invalid\n");
-+     return (0-DSLHAL_ERROR_INVALID_PARAM);
-+   }  
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+   
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return (0-DSLHAL_ERROR_BLOCK_READ);
-+     }
-+   
-+   dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
-+   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
-+                                      &phyPerf, sizeof(DEV_HOST_phyPerf_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return (0-DSLHAL_ERROR_BLOCK_READ);
-+     }
-+   rc = sizeof(phyPerf.hybridCost);
-+   for(i=0;i<(rc/4);i++)
-+     {
-+       metric[i] = dslhal_support_byteSwap32(phyPerf.hybridCost[i]);
-+     }
-+   return hybrid_selected;
-+}
-+
-+/******************************************************************************************    
-+ * FUNCTION NAME:    dslhal_api_selectInnerOuterPair(tidsl_t *ptidsl,unsigned int pairSelect)
-+ *    
-+ *******************************************************************************************    
-+ * DESCRIPTION: This fuction selects inner/outer pair on RJ11.  
-+ *    
-+ * INPUT:  PITIDSLHW_T *ptidsl , unsigned int pairSelect
-+ *           
-+ * RETURN: 0 SUCCESS    
-+ *         1 FAILED    
-+ *      
-+ *****************************************************************************************/    
-+unsigned int dslhal_api_selectInnerOuterPair(tidsl_t *ptidsl,unsigned int pairSelect)
-+{
-+   int rc; 
-+   
-+   dprintf(5, "dslhal_api_sendQuiet\n"); 
-+   rc = dslhal_support_writeHostMailbox(ptidsl, HOST_RJ11SELECT, (unsigned int)pairSelect, 0, 0); 
-+   if(rc)
-+    {  
-+      dprintf(1,"dslhal_api_sendQuiet failed\n");  
-+      return DSLHAL_ERROR_CTRL_API_FAILURE;    
-+    }  
-+    return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************    
-+ * FUNCTION NAME:    dslhal_api_resetTrainFailureLog(tidsl_t *ptidsl)
-+ *    
-+ *******************************************************************************************    
-+ * DESCRIPTION: This fuction resets the failed state log stored
-+ *    
-+ * INPUT:  PITIDSLHW_T *ptidsl
-+ *           
-+ * RETURN: 0 SUCCESS    
-+ *         1 FAILED    
-+ *      
-+ *****************************************************************************************/    
-+unsigned int dslhal_api_resetTrainFailureLog(tidsl_t *ptidsl)
-+{
-+    
-+   int rc;
-+   dprintf(5, "dslhal_api_resetTrainFailureLog \n"); 
-+   for(rc=0;rc<ptidsl->AppData.trainFails;rc++)
-+     {
-+       ptidsl->AppData.trainFailStates[rc]=0;
-+     }
-+   ptidsl->AppData.trainFails = 0;
-+   return DSLHAL_ERROR_NO_ERRORS; 
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureLed()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureLed(tidsl_t * ptidsl,unsigned int idLed, unsigned int onOff)
-+{
-+  int rc;
-+  DEV_HOST_modemEnvPublic_t modemEnv;
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  if(idLed>2 || onOff>2)
-+   {
-+     dprintf(3,"Invalid input parameter \n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+
-+  if(!ptidsl)
-+   {
-+     dprintf(3, "Error: PTIDSL pointer invalid\n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+   
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   
-+   dspOamSharedInterface.modemEnvPublic_p = (DEV_HOST_modemEnvPublic_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemEnvPublic_p);
-+   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemEnvPublic_p,
-+                                      &modemEnv, sizeof(DEV_HOST_modemEnvPublic_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   if(idLed==ID_DSL_LINK_LED)
-+     {
-+       modemEnv.overrideDslLinkLed_f = TRUE;
-+       if(onOff!=2)
-+          modemEnv.dslLinkLedState_f = onOff;
-+     }
-+   if(idLed==ID_DSL_ACT_LED)
-+     {
-+       modemEnv.overrideDslLinkLed_f = TRUE;
-+       if(onOff!=2)
-+          modemEnv.dslLinkLedState_f = onOff;
-+     }
-+   if(idLed==ID_RESTORE_DEFAULT_LED)
-+     {
-+       modemEnv.overrideDslLinkLed_f = FALSE;
-+       modemEnv.overrideDslActLed_f = FALSE;
-+     }
-+   rc=dslhal_support_blockWrite(&modemEnv,dspOamSharedInterface.modemEnvPublic_p,sizeof(DEV_HOST_modemEnvPublic_t)); 
-+   if(rc)
-+     return DSLHAL_ERROR_MODEMENV_API_FAILURE;
-+   else
-+     return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureExternBert()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureExternBert(tidsl_t * ptidsl,unsigned int configParm, unsigned int parmVal)
-+{
-+  int rc;
-+  DEV_HOST_modemEnvPublic_t modemEnv;
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  if(configParm>1 || parmVal>1)
-+   {
-+     dprintf(3,"Invalid input parameter \n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+
-+  if(!ptidsl)
-+   {
-+     dprintf(3, "Error: PTIDSL pointer invalid\n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+   
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   
-+   dspOamSharedInterface.modemEnvPublic_p = (DEV_HOST_modemEnvPublic_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemEnvPublic_p);
-+   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemEnvPublic_p,
-+                                      &modemEnv, sizeof(DEV_HOST_modemEnvPublic_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   if(configParm==0)
-+     {
-+       modemEnv.externalBert = parmVal;
-+     }
-+   if(configParm==1)
-+     {
-+       modemEnv.usBertPattern = parmVal;
-+     }
-+   rc=dslhal_support_blockWrite(&modemEnv,dspOamSharedInterface.modemEnvPublic_p,sizeof(DEV_HOST_modemEnvPublic_t)); 
-+   if(rc)
-+     return DSLHAL_ERROR_MODEMENV_API_FAILURE;
-+   else
-+     return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureAtmBert()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureAtmBert(tidsl_t * ptidsl,unsigned int configParm, unsigned int parmVal)
-+{
-+  int rc;
-+  DEV_HOST_atmDsBert_t atmDsBert;
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  if(configParm>1 || parmVal>1)
-+   {
-+     dprintf(3,"Invalid input parameter \n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+
-+  if(!ptidsl)
-+   {
-+     dprintf(3, "Error: PTIDSL pointer invalid\n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+   
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   
-+   dspOamSharedInterface.atmDsBert_p = (DEV_HOST_atmDsBert_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmDsBert_p);
-+   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmDsBert_p,
-+                                      &atmDsBert, sizeof(DEV_HOST_atmDsBert_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   if(configParm==0)
-+     {
-+       atmDsBert.atmBertFlag = parmVal;
-+       rc=dslhal_support_blockWrite(&atmDsBert,dspOamSharedInterface.atmDsBert_p,sizeof(DEV_HOST_atmDsBert_t)); 
-+       if(rc)
-+         return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+     }
-+   if(configParm==1)
-+     {
-+       ptidsl->AppData.atmBertBitCountLow = atmDsBert.bitCountLow;
-+       ptidsl->AppData.atmBertBitCountHigh = atmDsBert.bitCountHigh;
-+       ptidsl->AppData.atmBertBitErrorCountLow = atmDsBert.bitErrorCountLow;
-+       ptidsl->AppData.atmBertBitErrorCountHigh = atmDsBert.bitErrorCountHigh;
-+     }
-+   return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureDgaspLpr()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Configures dying gasp LPR signal
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureDgaspLpr(tidsl_t * ptidsl,unsigned int configParm, unsigned int parmVal)
-+{
-+  int rc;
-+  DEV_HOST_modemEnvPublic_t modemEnv;
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  if(configParm>1 || parmVal>1)
-+   {
-+     dprintf(3,"Invalid input parameter \n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+
-+  if(!ptidsl)
-+   {
-+     dprintf(3, "Error: PTIDSL pointer invalid\n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+   
-+   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   
-+   dspOamSharedInterface.modemEnvPublic_p = (DEV_HOST_modemEnvPublic_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemEnvPublic_p);
-+   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemEnvPublic_p,
-+                                      &modemEnv, sizeof(DEV_HOST_modemEnvPublic_t));
-+   if (rc)
-+     {
-+       dprintf(1,"dslhal_support_blockRead failed\n");
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     }
-+   if(configParm==0)
-+     {
-+       modemEnv.dGaspLprIndicator_f = parmVal;
-+     }
-+   if(configParm==1)
-+     {
-+       modemEnv.overrideDspLprGasp_f = parmVal;
-+     }
-+   rc=dslhal_support_blockWrite(&modemEnv,dspOamSharedInterface.modemEnvPublic_p,sizeof(DEV_HOST_modemEnvPublic_t)); 
-+   if(rc)
-+     return DSLHAL_ERROR_MODEMENV_API_FAILURE;
-+   else
-+     return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_genericDspRead()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Reads from a Generic Location in the DSP Host Interface
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_genericDspRead(tidsl_t * ptidsl,unsigned int offset1, unsigned int offset2, 
-+                                       unsigned int offset3, unsigned char *localBuffer, unsigned int numBytes)
-+{
-+  int rc=0;
-+  unsigned int  hostIfLoc,structLoc,elementLoc;
-+  hostIfLoc = (unsigned int)ptidsl->pmainAddr;
-+  if(numBytes<=0 || !localBuffer || !ptidsl)
-+   {
-+     dprintf(3,"Invalid input parameter \n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+  rc += dslhal_support_blockRead((PVOID)(hostIfLoc+sizeof(int)*offset1), &structLoc,sizeof(int));
-+  structLoc = dslhal_support_byteSwap32(structLoc);  
-+  rc += dslhal_support_blockRead((PVOID)(structLoc+sizeof(int)*offset2), &elementLoc,sizeof(int));
-+  elementLoc = dslhal_support_byteSwap32(elementLoc);    
-+  dprintf(3,"Host IF Location: 0x%x  Struct1 Location: 0x%x Element Location: 0x%x \n",hostIfLoc, structLoc, elementLoc);
-+  rc += dslhal_support_blockRead((PVOID)(elementLoc+(offset3*4)), localBuffer,numBytes);
-+  if (rc)
-+       return DSLHAL_ERROR_BLOCK_READ;
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_genericDspWrite()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Writes to a Generic Location in the DSP Host Interface
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_genericDspWrite(tidsl_t * ptidsl,unsigned int offset1, unsigned int offset2, 
-+                                        unsigned int offset3, unsigned char *localBuffer, unsigned int numBytes)
-+{
-+
-+  int rc=0;
-+  unsigned int  hostIfLoc,structLoc,elementLoc;
-+  hostIfLoc = (unsigned int)ptidsl->pmainAddr;
-+  if(numBytes<=0 || !localBuffer || !ptidsl)
-+   {
-+     dprintf(3,"Invalid input parameter \n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+  rc += dslhal_support_blockRead((PVOID)(hostIfLoc+(offset1*4)), &structLoc,4);  
-+  structLoc = dslhal_support_byteSwap32(structLoc);  
-+  rc += dslhal_support_blockRead((PVOID)(structLoc+(offset2*4)), &elementLoc,4);
-+  elementLoc = dslhal_support_byteSwap32(elementLoc);  
-+  dprintf(3,"Host IF Location: 0x%x  Struct1 Location: 0x%x Element Location: 0x%x \n",hostIfLoc, structLoc, elementLoc);
-+  rc += dslhal_support_blockWrite(localBuffer,(PVOID)(elementLoc+(offset3*4)),numBytes);
-+  if (rc)
-+       return DSLHAL_ERROR_BLOCK_READ;
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_dspInterfaceRead()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Reads from a Generic Location in the DSP Host Interface
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_dspInterfaceRead(tidsl_t * ptidsl,unsigned int baseAddr, unsigned int numOffsets, 
-+                                         unsigned int *offsets, unsigned char *localBuffer, unsigned int numBytes)
-+{
-+  int rc=0, off=0;
-+  unsigned int  prevAddr,currAddr;
-+  prevAddr = baseAddr;
-+  if(numBytes<=0 || !localBuffer || !ptidsl || !offsets)
-+   {
-+     dprintf(3,"Invalid input parameter \n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }
-+  for(off=0;off<numOffsets-1;off++)
-+    {
-+      rc += dslhal_support_blockRead((PVOID)(prevAddr+(4*offsets[off])), &currAddr,4);
-+      currAddr = dslhal_support_byteSwap32(currAddr);  
-+      prevAddr = currAddr;
-+      dprintf(5,"Curr Addr = 0x%x  Current Level: %d \n",currAddr,off);
-+    }
-+  currAddr = currAddr + offsets[numOffsets-1]*4;
-+  rc += dslhal_support_blockRead((PVOID)(currAddr),localBuffer,numBytes);
-+  if (rc)
-+       return DSLHAL_ERROR_BLOCK_READ;
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_dspInterfaceWrite()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Writes to a Generic Location in the DSP Host Interface
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_dspInterfaceWrite(tidsl_t * ptidsl,unsigned int baseAddr, unsigned int numOffsets, 
-+                                          unsigned int *offsets,unsigned char *localBuffer, unsigned int numBytes)
-+{
-+
-+  int rc=0, off=0;
-+  unsigned int  prevAddr,currAddr;
-+  prevAddr = baseAddr;
-+  if(numBytes<=0 || !localBuffer || !ptidsl || !offsets)
-+   {
-+     dprintf(3,"Invalid input parameter \n");
-+     return DSLHAL_ERROR_INVALID_PARAM;
-+   }  
-+  for(off=0;off<numOffsets-1;off++)
-+    {
-+      rc += dslhal_support_blockRead((PVOID)(prevAddr+(4*offsets[off])), &currAddr,4);
-+      currAddr = dslhal_support_byteSwap32(currAddr);  
-+      prevAddr = currAddr;
-+      dprintf(5,"Curr Addr = 0x%x  Current Level: %d \n",currAddr,off);
-+    }
-+  currAddr = currAddr + offsets[numOffsets-1]*4;
-+  rc += dslhal_support_blockWrite(localBuffer,(PVOID)(currAddr),numBytes);
-+  if (rc)
-+       return DSLHAL_ERROR_BLOCK_READ;
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+
-+/******************************************************************************************     
-+ * FUNCTION NAME:    dslhal_api_sendMailboxCommand(tidsl_t *ptidsl, unsigned int cmd)     
-+ *     
-+ *******************************************************************************************     
-+ * DESCRIPTION: This fuction sends the passed mailbox command to the DSP     
-+ *     
-+ * INPUT:  PITIDSLHW_T *ptidsl     
-+ *         unsigned int cmd
-+ *            
-+ * RETURN: 0 SUCCESS     
-+ *         1 FAILED     
-+ *       
-+ *****************************************************************************************/     
-+/* Function is commented out for now since, its not tested */
-+ /*unsigned int dslhal_api_sendMailboxCommand(tidsl_t *ptidsl, unsigned int cmd) 
-+{ 
-+   int rc;  
-+    
-+   dprintf(5, "dslhal_api_sendMailboxCommand\n");  
-+   rc = dslhal_support_writeHostMailbox(ptidsl, cmd, 0, 0, 0);  
-+   if(rc) 
-+     {   
-+      dprintf(1,"dslhal_api_sendMailboxCommand failed\n");   
-+      return DSLHAL_ERROR_CTRL_API_FAILURE;    
-+     }   
-+    return DSLHAL_ERROR_NO_ERRORS; 
-+} */
-+
-+
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_api.h linux.dev/drivers/atm/sangam_atm/dsl_hal_api.h
---- linux.old/drivers/atm/sangam_atm/dsl_hal_api.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_api.h	2005-08-23 04:46:50.097843696 +0200
-@@ -0,0 +1,1721 @@
-+#ifndef __DSL_HAL_API_H__
-+#define __DSL_HAL_API_H__ 1
-+/*******************************************************************************
-+* FILE PURPOSE:     DSL HAL to Application Interface for Sangam
-+*
-+********************************************************************************
-+* FILE NAME:        dsl_application_interface.h
-+*
-+* DESCRIPTION:  
-+*       DSL-Application Interface Structures
-+*                
-+*
-+* By: Ramakrishnan Parasuraman
-+*                    
-+* (C) Copyright 2003, Texas Instruments, Inc.
-+*    History
-+*    Data        Version    By               Notes
-+*    06Feb03     0.00       RamP            Initial Version Written 
-+*    07Apr03     0.01       RamP            Commented out typedefs
-+*    09Apr03     0.02       RamP            Added deviceContext and extended
-+*                                           dspVer to include bugfixes
-+*    14Apr03     0.03       RamP            Added stateTransition to structure
-+*    16Apr03     0.04       RamP            Removed typedefs; changed dspVer
-+*    22Apr03     0.05       RamP            Moved acknowledgeInterrupt from
-+*               (alpha)                     support module into this
-+*    24Apr03     0.06       RamP            Moved the RSTATE enum from register
-+*
-+*    28Apr03     0.07       RamP            Added additional parameter to the
-+*               (alpha +)                   handleInterrupt function for intrSrc
-+*    14May03     0.08       RamP            Added hybrid switching APIs
-+*               (alpha ++)                  Added statistics fields in AppData
-+*                                           Added netService identifier
-+*    20May03     0.09       RamP            Added Inner/Outer pair API support. 
-+*                                           Added dying gasp message.
-+*    29May03     0.10       RamP            Added coProfile structure                                       
-+*    04Jun03     0.11       RamP            Added margin per tone statistics,
-+*                                           Added timing counters, added train
-+*                                           failure functions,added config flags
-+*    06Jun03     0.12       RamP            Added LED, STM Bert, dGasp LPR 
-+*                                           config API functions 
-+*    09Jun03     0.13       RamP            Added ATM Bert function, CO stats
-+*                                           Moved stateTransition to ITIDSLHW
-+*               (Beta)                      Moved configFlag to ITIDSLHW, 
-+*                                           Cleaned up fifoInfo structure
-+*                                           Added US/DS R/S FEC parameters
-+*    21Aug03     0.14       RamP            Added g.hs message buffer, us/ds
-+*                                           bits n gains table, negoMsgs struct
-+*               (act)                       bitswap stucts/indices, trainstate,
-+*                                           Added functions for advanced config
-+*                                           Added gross gain and line length
-+*    29Sep03     0.15       RamP            Added tokens for advanced config 
-+*                                           module api functions
-+*    12Oct03     0.16       RamP            Added adsl2Msgs structure with worst
-+*                                           case size for variable length msgs 
-+*                                           Added API function prototypes
-+*    21Oct03     0.17       RamP            Added typedef for current modem 
-+*                                           user settings
-+*    28Oct03     0.18       RamP            Added function to config blackout
-+*                                           bitmap in the RMSGPCB message
-+*    20Nov03     0.19       RamP            Added functions for generic and
-+*                                           host interface read - write
-+*    24Nov03     0.20       RamP            Added enum for detailed state track
-+*                                           Added element for state bit fields
-+*                                           Addded rState for encoded main state
-+*                                           Added blackout valid flag
-+*    26Dec03     0.21       RamP            Added defines for oamFeature masks
-+*    30Dec03     0.22       RamP            Increased sizes for cMsgPcb,RMsgPcb
-+*                                           to incorporate DELT mode messages
-+*    30Dec03     0.23       RamP            Added generic mailbox command fxn
-+*******************************************************************************/
-+
-+#ifdef INTERNAL_BUILD
-+#include <dsl_hal_api_pvt.h>
-+#endif
-+
-+#define NUM_PAGES 4
-+#define OAMFEATURE_AUTORETRAIN_MASK       0x00000001
-+#define OAMFEATURE_TC_SYNC_DETECT_MASK    0x00000002
-+#define OAMFEATURE_EOCAOC_INTERRUPT_MASK  0x00000004
-+#define OAMFEATURE_CONS_DISP_DISABLE_MASK 0x00000008
-+#define OAMFEATURE_GHSMSG_INTERRUPT_MASK  0x00000010
-+
-+typedef struct tagTIOIDINFO
-+{
-+  unsigned int   bState;           /* addr->bDSPATURState    */ 
-+  unsigned int   USConRate;        /* US Conection Rates */
-+  unsigned int   DSConRate;        /* DS Connection Rates */
-+  unsigned int   USPayload;        /* ennic_tx_pullup*/
-+  unsigned int   DSPayload;        /* ennic_indicate_receive_packet*/
-+  unsigned int   FrmMode;          /* addr->atur_msg.framing_mode*/
-+  unsigned int   MaxFrmMode;          
-+  unsigned int   TrainedPath;      /* Status of the Modem in which trained (Fast or Interleaved Path) */
-+  unsigned int   TrainedMode;      /* Status of the mode in which the modem is trained (G.dmt, T1.413, etc) */
-+  
-+  /* Superframe Count */
-+  unsigned int   usSuperFrmCnt;    /* Num of US Superframes */
-+  unsigned int   dsSuperFrmCnt;    /* Num of DS Superframes */
-+
-+  /* LOS & SEF Stats */
-+  unsigned int   LOS_errors;       /* Num of ADSL frames where loss-of-sync */
-+  unsigned int   SEF_errors;       /* Num of severly errored ADSL frames - LOS > MAXBADSYNC ADSL frames */
-+  unsigned int   coLosErrors; /* CO LOS Defects */
-+  unsigned int   coRdiErrors; /* CO RDI defects */
-+  /* CRC Stats */
-+  unsigned int   usICRC_errors;    /* Num of Upstream CRC errored ADSL frames on Interleaved Path */
-+  unsigned int   usFCRC_errors;    /* Num of Upstream CRC errored ADSL frames on Fast Path */
-+  unsigned int   dsICRC_errors;    /* Num of Downstream CRC errored ADSL frames on Interleaved Path */
-+  unsigned int   dsFCRC_errors;    /* Num of Downstream CRC errored ADSL frames on Fast Path */
-+
-+  /* FEC Stats */
-+  unsigned int   usIFEC_errors;    /* Num of Upstream FEC errored (corrected) ADSL frames on Interleaved Path */
-+  unsigned int   usFFEC_errors;    /* Num of Upstream FEC errored (corrected) ADSL frames on Fast Path */
-+  unsigned int   dsIFEC_errors;    /* Num of Downstream FEC errored (corrected) ADSL frames on Interleaved Path */
-+  unsigned int   dsFFEC_errors;    /* Num of Downstream FEC errored (corrected) ADSL frames on Fast Path */
-+
-+  /* NCD Stats */
-+  unsigned int   usINCD_error;     /* UpStream No Cell Delineation on Interleaved Path */
-+  unsigned int   usFNCD_error;     /* UpStream No Cell Delineation on Fast Path */
-+  unsigned int   dsINCD_error;     /* Downstream No Cell Delineation on Interleaved Path */
-+  unsigned int   dsFNCD_error;     /* Downstream No Cell Delineation on Fast Path */
-+
-+  /* LCD Stats */
-+  unsigned int   usILCD_errors;    /* UpStream Loss of Cell Delineation (within the same connection) on Interleaved Path */
-+  unsigned int   usFLCD_errors;    /* UpStream Loss of Cell Delineation (within the same connection) on Fast Path */
-+  unsigned int   dsILCD_errors;    /* Downstream Loss of Cell Delineation (within the same connection) on Interleaved Path */
-+  unsigned int   dsFLCD_errors;    /* Downstream Loss of Cell Delineation (within the same connection) on Fast Path */
-+
-+  /* HEC Stats */
-+  unsigned int   usIHEC_errors;    /* Num of Upstream HEC errored ADSL frames on Interleaved Path */
-+  unsigned int   usFHEC_errors;    /* Num of Upstream HEC errored ADSL frames on Fast Path */
-+  unsigned int   dsIHEC_errors;    /* Num of Downstream HEC errored ADSL frames on Interleaved Path */
-+  unsigned int   dsFHEC_errors;    /* Num of Downstream HEC errored ADSL frames on Fast Path */
-+
-+  /* Upstream ATM Stats */
-+  unsigned int   usAtm_count[2];      /* Upstream Good Cell Count */
-+  unsigned int   usIdle_count[2];     /* Upstream Idle Cell Count */
-+  unsigned int   usPdu_count[2];      /* UpStream PDU Count */
-+
-+  /* Downstream ATM Stats */
-+  unsigned int   dsGood_count[2];     /* Downstream Good Cell Count */
-+  unsigned int   dsIdle_count[2];     /* Downstream Idle Cell Count */
-+  unsigned int   dsBadHec_count[2];   /* Downstream Bad Hec Cell Count */
-+  unsigned int   dsOVFDrop_count[2];  /* Downstream Overflow Dropped Cell Count */
-+  unsigned int   dsPdu_count[2];      /* Downstream PDU Count */
-+                             /* (only looks for end of pdu on good atm cells received, */
-+                             /* not on Bad_Hec or Overflow cell) */
-+
-+  unsigned int   dsLineAttn;       /* DS Line Attenuation */
-+  unsigned int   dsMargin;         /* Measured DS MArgin */
-+
-+  unsigned int   usLineAttn;
-+  unsigned int   usMargin;
-+
-+  unsigned char    bCMsgs1[6];
-+  unsigned char    bRMsgs1[6];
-+  unsigned char    bCRates2;
-+  unsigned char    bRRates2;
-+  unsigned char    bRRates1[4][11];
-+  unsigned char    bCMsgs2[4];
-+  unsigned char    bCRates1[4][30];
-+  unsigned char    bRMsgs2[4];
-+   
-+  unsigned int   USPeakCellRate; 
-+  
-+  unsigned int   dsl_status;
-+  unsigned int   dsl_modulation;
-+  unsigned char  dsl_ghsRxBuf[10][64];
-+  unsigned char  dsl_GHS_msg_type[2];
-+   
-+  int     TxVCs[12];
-+  int     RxVCs[12];
-+
-+  unsigned int   vci_vpi_val;
-+
-+  unsigned char  BitAllocTblDstrm[256]; 
-+  unsigned char  BitAllocTblUstrm[32];  
-+    signed char  marginTblDstrm[256];
-+  unsigned char  rBng[512];
-+  unsigned char  cBng[126];
-+           int   usTxPower;
-+           int   dsTxPower;
-+         short   rxSnrPerBin0[256];
-+         short   rxSnrPerBin1[256];
-+         short   rxSnrPerBin2[256];
-+
-+  unsigned int   StdMode;
-+  unsigned int   atucVendorId;
-+  unsigned char  currentHybridNum;
-+  unsigned char  atucRevisionNum; 
-+  unsigned int   trainFails;
-+  unsigned int   trainFailStates[30];
-+  unsigned int   idleTick;
-+  unsigned int   initTick;
-+  unsigned int   showtimeTick; 
-+  unsigned char  dsFastParityBytesPerSymbol;
-+  unsigned char  dsIntlvParityBytesPerSymbol;
-+  unsigned char  dsSymbolsPerCodeWord;
-+  unsigned int   dsInterleaverDepth;
-+  unsigned char  usFastParityBytesPerSymbol;
-+  unsigned char  usIntlvParityBytesPerSymbol;
-+  unsigned char  usSymbolsPerCodeWord;
-+  unsigned int   usInterleaverDepth;
-+  unsigned int   atmBertBitCountLow;
-+  unsigned int   atmBertBitCountHigh;
-+  unsigned int   atmBertBitErrorCountLow;
-+  unsigned int   atmBertBitErrorCountHigh;
-+  unsigned int   lineLength;
-+  unsigned int   grossGain;
-+           int   rxNoisePower0[256];
-+           int   rxNoisePower1[256];
-+}TIOIDINFO,*PTIOIDINFO;
-+
-+typedef struct{
-+  unsigned char    bCMsgs1[6];
-+  unsigned char    bCRates2;
-+  unsigned char    bRRates2;
-+  unsigned char    bRRates1[4][11];
-+  unsigned char    bCMsgs2[4];
-+  unsigned char    bCRates1[4][30];
-+  unsigned char    bCRatesRA[4][30];
-+  unsigned char    bRMsgs2[4];
-+  unsigned char    bRRatesRA[4];
-+  unsigned char    bRMsgsRA[12];
-+  unsigned char    bCMsgsRA[6];
-+}negoMsgs;
-+
-+typedef struct{
-+  unsigned char    cMsgFmt[2];
-+  unsigned char    rMsgFmt[2];
-+  unsigned char    cMsgPcb[12];
-+  unsigned char    rMsgPcb[70];
-+  unsigned char    dummy1[2];
-+  unsigned char    cMsg1[40];
-+  unsigned char    rMsg1[4]; 
-+  unsigned char    cMsg2[8];
-+  unsigned char    rMsg2[64];
-+  unsigned char    cParams[264];
-+  unsigned char    rParams[2088];
-+  unsigned short   cMsgPcbLen; 
-+  unsigned short   rMsgPcbLen;
-+  unsigned short   cMsg1Len; 
-+  unsigned short   rMsg1Len;
-+  unsigned short   cMsg2Len;
-+  unsigned short   rMsg2Len;
-+  unsigned short   cParamsLen;
-+  unsigned short   rParamsLen;    
-+}adsl2Msgs;
-+
-+typedef struct{
-+  unsigned char    rMsg1Ld[16];
-+  unsigned char    rMsg2Ld[260];
-+  unsigned char    rMsg3Ld[260];
-+  unsigned char    rMsg4Ld[260];
-+  unsigned char    rMsg5Ld[260];
-+  unsigned char    rMsg6Ld[260];
-+  unsigned char    rMsg7Ld[260];
-+  unsigned char    rMsg8Ld[260];
-+  unsigned char    rMsg9Ld[260];
-+  unsigned char    cMsg1Ld[16];
-+  unsigned char    cMsg2Ld[260];
-+  unsigned char    cMsg3Ld[132];
-+  unsigned char    cMsg4Ld[68];
-+  unsigned char    cMsg5Ld[68];
-+  unsigned short   rMsg1LdLen;
-+  unsigned short   rMsgxLdLen;
-+  unsigned short   cMsg1LdLen;
-+  unsigned short   cMsg2LdLen;
-+  unsigned short   cMsg3LdLen;
-+  unsigned short   cMsg4LdLen;
-+  unsigned short   cMsg5LdLen;
-+  unsigned short   dummy8;
-+}adsl2DeltMsgs;
-+
-+typedef struct{
-+  unsigned char    trellisFlag;
-+  unsigned char    rateAdaptFlag;
-+  unsigned char    marginMonitorTraining;
-+  unsigned char    marginMonitorShowtime;  
-+    signed char    marginThreshold;    
-+  unsigned char    disableLosFlag;
-+  unsigned char    aturConfig[30]; 
-+  unsigned char    eocVendorId[8];
-+  unsigned char    eocSerialNumber[32];
-+  unsigned char    eocRevisionNumber[4];
-+}currentPhySettings;
-+
-+
-+typedef struct
-+{
-+  unsigned int  PmemStartWtAddr;              /* source address in host memory */
-+  unsigned int  OverlayXferCount;             /* number of 32bit words to be transfered */
-+  unsigned int  BinAddr;                      /* destination address in dsp's pmem */
-+  unsigned int  overlayHostAddr;
-+  unsigned int  olayPageCrc32;
-+  unsigned int  SecOffset;
-+} OlayDP_Def;
-+
-+typedef struct
-+{
-+  unsigned int    timeStamp; /* TimeStp revision  */
-+  unsigned char   major;     /* Major revision    */
-+  unsigned char   minor;     /* Minor revision    */
-+  unsigned char   bugFix;    /* BugFix revision   */
-+  unsigned char   buildNum;  /* BuildNum revision */
-+  unsigned char   reserved;  /* for future use    */
-+}dspVer;
-+
-+typedef struct{
-+  unsigned char major;
-+  unsigned char minor;
-+  unsigned char bugfix;
-+  unsigned char buildNum;
-+  unsigned int  timeStamp;
-+}dslVer;
-+
-+typedef struct{
-+  unsigned char bitSwapCommand[6];
-+  unsigned char bitSwapBinNum[6];
-+  unsigned char bitSwapSFrmCnt;
-+}dslBitSwapDef;
-+
-+typedef struct{
-+  unsigned int aturState;
-+  unsigned int subStateIndex;
-+  unsigned int timeStamp;
-+}trainStateInfo;
-+
-+typedef struct{
-+  unsigned char ctrlBits;
-+  unsigned char infoBits;
-+}eocMessageDef;
-+      
-+enum
-+{
-+  RSTATE_TEST,
-+  RSTATE_IDLE,
-+  RSTATE_INIT,
-+  RSTATE_HS,
-+  RSTATE_RTDL,
-+  RSTATE_SHOWTIME,
-+};
-+
-+typedef enum
-+{
-+  ATU_RZERO1      = 100,
-+  ATU_RTEST       = 101,
-+  ATU_RIDLE       = 102,
-+  ATU_RINIT       = 103,
-+  ATU_RRESET      = 104,
-+  GDMT_NSFLR      = 105,
-+  GDMT_TONE       = 106,
-+  GDMT_SILENT     = 107,
-+  GDMT_NEGO       = 108,
-+  GDMT_FAIL       = 109,
-+  GDMT_ACKX       = 110,
-+  GDMT_QUIET2     = 111,
-+  ATU_RZERO2      = 200,
-+  T1413_NSFLR     = 201,
-+  T1413_ACTREQ    = 202,
-+  T1413_ACTMON    = 203,
-+  T1413_FAIL      = 204,
-+  T1413_ACKX      = 205,
-+  T1413_QUIET2    = 206,
-+  ATU_RQUIET2     = 207,
-+  ATU_RREVERB1    = 208,
-+  ATU_RQUIET3     = 209,
-+  ATU_RECT        = 210,
-+  ATU_RREVERB2    = 211,
-+  ATU_RSEGUE1     = 212,
-+  ATU_RREVERB3    = 213,
-+  ATU_RSEGUE2     = 214,
-+  ATU_RRATES1     = 215,
-+  ATU_RMSGS1      = 216,
-+  ATU_RMEDLEY     = 217,
-+  ATU_RREVERB4    = 218,
-+  ATU_RSEGUE3     = 219,
-+  ATU_RMSGSRA     = 220,
-+  ATU_RRATESRA    = 221,
-+  ATU_RREVERBRA   = 222,
-+  ATU_RSEGUERA    = 223,
-+  ATU_RMSGS2      = 224,
-+  ATU_RRATES2     = 225,
-+  ATU_RREVERB5    = 226,
-+  ATU_RSEGUE4     = 227,
-+  ATU_RBNG        = 228,
-+  ATU_RREVERB6    = 229,
-+  ATU_RSHOWTIME   = 230,
-+  ATU_RZERO3      = 300,
-+  ADSL2_QUIET1    = 301,
-+  ADSL2_COMB1     = 302,
-+  ADSL2_QUIET2    = 303,
-+  ADSL2_COMB2     = 304,
-+  ADSL2_ICOMB1    = 305,
-+  ADSL2_LINEPROBE = 306,
-+  ADSL2_QUIET3    = 307,
-+  ADSL2_COMB3     = 308,
-+  ADSL2_ICOMB2    = 309,
-+  ADSL2_RMSGFMT   = 310,
-+  ADSL2_RMSGPCB   = 311,
-+  ADSL2_REVERB1   = 312,
-+  ADSL2_QUIET4    = 313,
-+  ADSL2_REVERB2   = 314,
-+  ADSL2_QUIET5    = 315,
-+  ADSL2_REVERB3   = 316,
-+  ADSL2_ECT       = 317,
-+  ADSL2_REVERB4   = 318,
-+  ADSL2_SEGUE1    = 319,
-+  ADSL2_REVERB5   = 320,
-+  ADSL2_SEGUE2    = 321,
-+  ADSL2_RMSG1     = 322,
-+  ADSL2_MEDLEY    = 323,
-+  ADSL2_EXCHANGE  = 324,
-+  ADSL2_RMSG2     = 325,
-+  ADSL2_REVERB6   = 326,
-+  ADSL2_SEGUE3    = 327,
-+  ADSL2_RPARAMS   = 328,
-+  ADSL2_REVERB7   = 329,
-+  ADSL2_SEGUE4    = 330,
-+  ATU_RZERO4      = 400,
-+  DELT_SEGUE1     = 401,
-+  DELT_REVERB5    = 402,
-+  DELT_SEGUE2     = 403,
-+  DELT_EXCHANGE   = 404,
-+  DELT_SEGUELD    = 405,
-+  DELT_RMSGLD     = 406,
-+  DELT_QUIET1LD   = 407,
-+  DELT_QUIET2LD   = 408,
-+  DELT_RACK1      = 409,
-+  DELT_RNACK1     = 410,
-+  DELT_QUIETLAST  = 411
-+} modemStates_t;  
-+
-+enum
-+{
-+  DSLTRAIN_NO_MODE,
-+  DSLTRAIN_MULTI_MODE,
-+  DSLTRAIN_T1413_MODE,
-+  DSLTRAIN_GDMT_MODE,
-+  DSLTRAIN_GLITE_MODE
-+};
-+
-+enum
-+{
-+  ID_RESTORE_DEFAULT_LED,
-+  ID_DSL_LINK_LED,
-+  ID_DSL_ACT_LED
-+};
-+
-+typedef struct _ITIDSLHW
-+{
-+  /* struct _TIDSL_IHwVtbl * pVtbl; */
-+  unsigned char*     fwimage;
-+  void*     pmainAddr;
-+  void*     pOsContext;
-+  unsigned int     ReferenceCount;
-+  unsigned int     netService;  
-+
-+  int     InitFlag;
-+
-+  int     imagesize;
-+  
-+  unsigned int     lConnected;
-+  unsigned int     bStatisticsInitialized;
-+  unsigned int     rState;
-+  unsigned int     bShutdown; 
-+  unsigned int     blackOutValid_f;
-+  unsigned char    blackOutBits[64];
-+  unsigned int     bAutoRetrain;
-+  volatile unsigned int     bOverlayPageLoaded;
-+  unsigned int     stateTransition;
-+  unsigned int     configFlag;
-+  unsigned int     dsBitSwapInx;
-+  unsigned int     usBitSwapInx;
-+  unsigned int     trainStateInx;
-+  unsigned int     usEocMsgInx;
-+  unsigned int     dsEocMsgInx;
-+  unsigned int     reasonForDrop;
-+  TIOIDINFO  AppData;
-+  dspVer     dspVer;
-+
-+  OlayDP_Def olayDpPage[NUM_PAGES];
-+  OlayDP_Def coProfiles;
-+  OlayDP_Def constDisplay;
-+  dslBitSwapDef dsBitSwap[30];
-+  dslBitSwapDef usBitSwap[30];  
-+  trainStateInfo trainHistory[120];
-+  eocMessageDef usEocMsgBuf[30];
-+  eocMessageDef dsEocMsgBuf[30];
-+  adsl2Msgs     adsl2TrainingMessages;
-+  adsl2DeltMsgs adsl2DiagnosticMessages;
-+  unsigned int modemStateBitField[4];
-+#ifdef INTERNAL_BUILD
-+  internalParameters internalVars;
-+#endif
-+} ITIDSLHW_T, *PITIDSLHW_T, tidsl_t;
-+
-+
-+/**********************************************************************************
-+* API proto type defines
-+**********************************************************************************/
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_dslStartup
-+*
-+*******************************************************************************************
-+* DESCRIPTION: Entry point to initialize and load ax5 daughter board
-+*
-+* INPUT:   PITIDSLHW_T *ppIHw  
-+*
-+* RETURN:  0 --succeeded
-+*          1 --Failed
-+*
-+* Notes: external function osAllocateMemory(), osZeroMemory(), osLoadFWImage() are required
-+*****************************************************************************************/
-+int dslhal_api_dslStartup
-+(
-+ PITIDSLHW_T *ppIHw
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_gatherStatistics
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Read statistical infromation from ax5 modem daugter card. 
-+* Input: tidsl_t *ptidsl
-+* 
-+* Return: 0    success
-+*         1    failed
-+*
-+********************************************************************************************/
-+
-+void dslhal_api_gatherStatistics
-+(
-+ tidsl_t * ptidsl
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_initStatistics
-+*
-+*********************************************************************************************
-+* DESCRIPTION: init statistical infromation of ax5 modem daugter card. 
-+*
-+* Input: tidsl_t *ptidsl
-+* 
-+* Return: NULL
-+*         
-+********************************************************************************************/
-+
-+void dslhal_api_initStatistics
-+(
-+ tidsl_t * ptidsl
-+);
-+
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_getDslDriverVersion
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This routine supply DSL Driver version.
-+*
-+* INPUT:  tidsl_t * ptidsl
-+*         void *pVer, DSP Driver Version Pointer
-+*         
-+* RETURN:  0 --succeeded
-+*          1 --Failed
-+* Note: See verdef_u.h for version structure definition.
-+*****************************************************************************************/
-+
-+void dslhal_api_getDslHalVersion
-+(
-+ void  *pVer
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_dslShutdown
-+*
-+*******************************************************************************************
-+* DESCRIPTION: routine to shutdown ax5 modem and free the resource
-+*
-+* INPUT:   tidsl_t *ptidsl  
-+*
-+* RETURN:  NULL
-+*          
-+* Notes: external function osFreeMemory() is required.
-+*****************************************************************************************/
-+
-+int dslhal_api_dslShutdown
-+(
-+ tidsl_t *ptidsl
-+);
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_getDspVersion
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This routine supply AX5 daugther card DSP version.
-+*
-+* INPUT:  tidsl_t * ptidsl
-+*         void *pVer, DSP version struct is returned starting at this pointer
-+*         
-+* RETURN:  0 --succeeded
-+*          1 --Failed
-+* 
-+*****************************************************************************************/
-+
-+int dslhal_api_getDspVersion
-+(
-+ tidsl_t *ptidsl,
-+ void  *pVer
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_digi_memTestA()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function does the digital tests on the DSP. It does the DSP ID test,
-+*              memory tests on the external and internal memories of DSP, Codec Interconnect 
-+*              test and Interrupt Test.
-+*
-+* Input:       Test selects the test to be performed based on the elements set of 9 element
-+*              array passed the the parameter. 
-+*             
-+* Return:      Status of the Tests Failed
-+*         
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_digi_memTestA
-+(
-+unsigned int*   Test
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_digi_memTestB()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function does the digital tests on the DSP. It does the DSP ID test,
-+*              memory tests on the external and internal memories of DSP, Codec Interconnect 
-+*              test and Interrupt Test.
-+*
-+* Input:       Test selects the digital test to be performed.
-+* 
-+* Return:      Status of the Tests Failed
-+*         
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_digi_memTestB
-+(
-+unsigned int   Test,
-+unsigned int   *Status
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_tonesTestA()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+*              tones and Medley's with missing tones. These signals are defined in ITU 
-+*              G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+*        Array is a 64 element unsigned integer type array. The element of this array
-+*              describe which tones are to be generated by selecting the element of
-+*              the array to be non zero.
-+* Return: NULL
-+*         
-+********************************************************************************************/
-+
-+void dslhal_diags_anlg_tonesTestA
-+(
-+unsigned int   Test, 
-+unsigned int* Array
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_tonesTestB()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+*              tones and Medley's with missing tones. These signals are defined in ITU 
-+*              G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+*        Array is a 64 element unsigned integer type array. The element of this array
-+*              describe which tones are to be generated by selecting the element of
-+*              the array to be non zero.
-+* Return: NULL
-+*         
-+********************************************************************************************/
-+
-+void dslhal_diags_anlg_tonesTestB
-+(
-+unsigned int   Test, 
-+unsigned int  Tones
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_rxNoiseTest()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+*              tones and Medley's with missing tones. These signals are defined in ITU 
-+*              G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+*        Tones selects the .
-+* Return: NULL
-+*         
-+********************************************************************************************/
-+
-+void dslhal_diags_anlg_rxNoiseTest
-+(int agcFlag,
-+short pga1, 
-+short pga2, 
-+short pga3, 
-+short aeq
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_ecNoiseTest()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+*              tones and Medley's with missing tones. These signals are defined in ITU 
-+*              G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+*        Tones selects the .
-+* Return: NULL
-+*         
-+********************************************************************************************/
-+
-+void dslhal_diags_anlg_ecNoiseTest
-+(int agcFlag,
-+short pga1, 
-+short pga2, 
-+short pga3, 
-+short aeq
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_pollTrainingStatus()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: code to decode modem status and to start modem training 
-+*
-+* Input: tidsl_t *ptidsl
-+* 
-+* Return: 0-? status mode training
-+*         -1    failed
-+*
-+********************************************************************************************/
-+int dslhal_api_pollTrainingStatus
-+(
-+ tidsl_t *ptidsl
-+);
-+
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_handleTrainingInterrupt()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Code to handle ax5 hardware interrupts
-+*
-+* Input: tidsl_t *ptidsl
-+*        int *pMsg, pointer to returned hardware messages. Each byte represent a messge
-+*        int *pTag, pointer to returned hardware message tags. Each byte represent a tag.
-+* Return: 0    success  
-+*         1    failed
-+*
-+********************************************************************************************/
-+int dslhal_api_handleTrainingInterrupt
-+(
-+ tidsl_t *ptidsl,
-+ int intrSource
-+);
-+
-+/******************************************************************************************    
-+ * FUNCTION NAME:    dslhal_api_setEocSerialNumber(tidsl_t *ptidsl,char *SerialNumber)    
-+ *    
-+ *******************************************************************************************    
-+ * DESCRIPTION: This fuction Sets the EOC Serial Number    
-+ *    
-+ * INPUT:  PITIDSLHW_T *ptidsl    
-+ *         char *SerialNumber : Input EOC Serial Number  
-+ *    
-+ * RETURN: 0 SUCCESS    
-+ *         1 FAILED    
-+ *    
-+ *****************************************************************************************/    
-+unsigned int dslhal_api_setEocSerialNumber 
-+( 
-+tidsl_t *ptidsl, 
-+char *SerialNumber 
-+);    
-+ 
-+/******************************************************************************************     
-+ * FUNCTION NAME:    dslhal_api_setEocVendorId(tidsl_t *ptidsl,char *VendorID)     
-+ *     
-+ *******************************************************************************************     
-+ * DESCRIPTION: This fuction Sets the EOC Serial Number     
-+ *     
-+ * INPUT:  PITIDSLHW_T *ptidsl     
-+ *         char *VendorID : EOC Vendor ID   
-+ *     
-+ * RETURN: 0 SUCCESS     
-+ *         1 FAILED     
-+ *     
-+ *****************************************************************************************/     
-+unsigned int dslhal_api_setEocVendorId  
-+(  
-+tidsl_t *ptidsl,  
-+char *VendorID  
-+);     
-+ 
-+/******************************************************************************************     
-+ * FUNCTION NAME:    dslhal_api_setEocRevisionNumber(tidsl_t *ptidsl,char *RevNum)     
-+ *     
-+ *******************************************************************************************     
-+ * DESCRIPTION: This fuction Sets the EOC Revision Number     
-+ *     
-+ * INPUT:  PITIDSLHW_T *ptidsl     
-+ *         char *RevNum : Input EOC Revision Number   
-+ *     
-+ * RETURN: 0 SUCCESS     
-+ *         1 FAILED     
-+ *     
-+ *****************************************************************************************/     
-+unsigned int dslhal_api_setEocRevisionNumber 
-+( 
-+tidsl_t *ptidsl, 
-+char *RevNumber 
-+);     
-+ 
-+/******************************************************************************************      
-+ * FUNCTION NAME:    dslhal_api_setAturConfig(tidsl_t *ptidsl,char *ATURConfig)      
-+ *      
-+ *******************************************************************************************      
-+ * DESCRIPTION: This fuction Sets the EOC ATUR Config Register  
-+ *      
-+ * INPUT:  PITIDSLHW_T *ptidsl      
-+ *         char *RevNum : Input EOC ATUR Config Register    
-+ *      
-+ * RETURN: 0 SUCCESS      
-+ *         1 FAILED      
-+ *      
-+ *****************************************************************************************/      
-+unsigned int dslhal_api_setAturConfig 
-+(  
-+tidsl_t *ptidsl,  
-+char *ATURConfig 
-+);      
-+ 
-+/******************************************************************************************   
-+ * FUNCTION NAME:    dslhal_api_disableLosAlarm(tidsl_t *ptidsl, unsigned int set)   
-+ *   
-+ *******************************************************************************************   
-+ * DESCRIPTION: This fuction disables all the LOS alarms   
-+ *   
-+ * INPUT:  PITIDSLHW_T *ptidsl   
-+ *         unsigned int set // if set == TRUE : Disable LOS alarms, else enable
-+ *          
-+ * RETURN: 0 SUCCESS   
-+ *         1 FAILED   
-+ * NOTES:  Currently not supported in any version other than MR4 Patch release..    
-+ *****************************************************************************************/   
-+unsigned int dslhal_api_disableLosAlarm 
-+( 
-+tidsl_t *ptidsl,
-+unsigned int 
-+);   
-+  
-+/******************************************************************************************   
-+ * FUNCTION NAME:    dslhal_api_sendIdle(tidsl_t *ptidsl)   
-+ *   
-+ *******************************************************************************************   
-+ * DESCRIPTION: This fuction sends the CMD_IDLE message to the DSP   
-+ *   
-+ * INPUT:  PITIDSLHW_T *ptidsl   
-+ *          
-+ * RETURN: 0 SUCCESS   
-+ *         1 FAILED   
-+ *     
-+ *****************************************************************************************/   
-+unsigned int dslhal_api_sendIdle 
-+( 
-+tidsl_t *ptidsl 
-+);   
-+ 
-+/******************************************************************************************    
-+ * FUNCTION NAME:    dslhal_api_sendQuiet(tidsl_t *ptidsl)    
-+ *    
-+ *******************************************************************************************    
-+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP    
-+ *    
-+ * INPUT:  PITIDSLHW_T *ptidsl    
-+ *           
-+ * RETURN: 0 SUCCESS    
-+ *         1 FAILED    
-+ *      
-+ *****************************************************************************************/    
-+unsigned int dslhal_api_sendQuiet  
-+(  
-+tidsl_t *ptidsl  
-+);    
-+
-+/******************************************************************************************    
-+ * FUNCTION NAME:    dslhal_api_sendDgasp(tidsl_t *ptidsl)    
-+ *    
-+ *******************************************************************************************    
-+ * DESCRIPTION: This fuction sends the HOST_DGASP message to the DSP    
-+ *    
-+ * INPUT:  PITIDSLHW_T *ptidsl    
-+ *           
-+ * RETURN: 0 SUCCESS    
-+ *         1 FAILED    
-+ *      
-+ *****************************************************************************************/    
-+unsigned int dslhal_api_sendDgasp  
-+(  
-+tidsl_t *ptidsl  
-+);    
-+
-+/******************************************************************************************    
-+ * FUNCTION NAME:    dslhal_api_setMarginThreshold(tidsl_t *ptidsl, int threshold)    
-+ *    
-+ *******************************************************************************************    
-+ * DESCRIPTION: This fuction does sets the Margin threshold   
-+ *    
-+ * INPUT:  PITIDSLHW_T *ptidsl    
-+ *         int threshold   
-+ *          
-+ *                                    
-+ * RETURN: 0 SUCCESS    
-+ *         1 FAILED    
-+ *    
-+ *****************************************************************************************/    
-+unsigned int dslhal_api_setMarginThreshold 
-+( 
-+tidsl_t *ptidsl, 
-+int threshold 
-+); 
-+
-+
-+/******************************************************************************************  
-+ * FUNCTION NAME:    dslhal_api_setMarginMonitorFlags(tidsl_t *ptidsl, unsigned int trainflag,unsigned int shwtflag)  
-+ *  
-+ *******************************************************************************************  
-+ * DESCRIPTION: This fuction does sets the Margin monitoring flag 
-+ *  
-+ * INPUT:  PITIDSLHW_T *ptidsl  
-+ *         unsigned int trainflag 
-+ *         unsigned int shwtflag  
-+ *                                  
-+ * RETURN: 0 SUCCESS  
-+ *         1 FAILED  
-+ *  
-+ *****************************************************************************************/  
-+unsigned int dslhal_api_setMarginMonitorFlags
-+(
-+tidsl_t *ptidsl,
-+unsigned int trainflag,
-+unsigned int shwtflag
-+);  
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_setRateAdaptFlag(tidsl_t *ptidsl)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Rate Adapt Enable Flag
-+*
-+* INPUT:  PITIDSLHW_T *ptidsl
-+*         unsigned int flag //if flag = TRUE set flag else reset
-+* RETURN: 0 SUCCESS
-+*         1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setRateAdaptFlag
-+(
-+tidsl_t *ptidsl,
-+unsigned int flag
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_setTrellisFlag(tidsl_t *ptidsl, unsigned int flag)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Trellis Coding Enable Flag
-+*
-+* INPUT:  PITIDSLHW_T *ptidsl
-+*         unsigned int flag //if flag = TRUE set flag else reset
-+* RETURN: 0 SUCCESS
-+*         1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setTrellisFlag
-+(
-+tidsl_t *ptidsl,
-+unsigned int flag
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_setMaxBitsPerCarrier(tidsl_t *ptidsl,unsigned int maxbits)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Maximum bits per carrier value
-+*
-+* INPUT:  PITIDSLHW_T *ptidsl
-+*         unsigned int maxbits : should be a value between 0-15
-+*
-+* RETURN: 0 SUCCESS
-+*         1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setMaxBitsPerCarrier
-+(
-+tidsl_t *ptidsl,
-+unsigned int maxbits
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_setMaxInterleaverDepth(tidsl_t *ptidsl,unsigned int maxdepth)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Maximum Interleave Depth Supported
-+*
-+* INPUT:  PITIDSLHW_T *ptidsl
-+*         unsigned int maxdepth : Should be between 0 and 3 depending on intlv buffer
-+*                                 size 64-512
-+* RETURN: 0 SUCCESS
-+*         1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setMaxInterleaverDepth
-+(
-+tidsl_t *ptidsl,
-+unsigned int maxdepth
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_api_setTrainingMode(tidsl_t *ptidsl,unsigned int trainmode)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the desired training mode(none/T1.413/G.dmt/G.lite)
-+*
-+* INPUT:  PITIDSLHW_T *ptidsl
-+*         unsigned int trainmode :Should be between 0 and 4; 0:No Mode 1:Multimode
-+*                                 2: T1.413, 3:G.dmt, 4: G.lite
-+* RETURN: 0 SUCCESS
-+*         1 FAILED
-+*
-+*****************************************************************************************/
-+
-+unsigned int dslhal_api_setTrainingMode
-+(
-+tidsl_t *ptidsl,
-+unsigned int trainmode
-+);
-+
-+/******************************************************************************************   
-+ * FUNCTION NAME:    dslhal_api_dslRetrain(tidsl_t *ptidsl)   
-+ *   
-+ *******************************************************************************************   
-+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP   
-+ *   
-+ * INPUT:  PITIDSLHW_T *ptidsl   
-+ *          
-+ * RETURN: 0 SUCCESS   
-+ *         1 FAILED   
-+ *     
-+ *****************************************************************************************/   
-+unsigned int dslhal_api_dslRetrain 
-+( 
-+tidsl_t *ptidsl 
-+);   
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_acknowledgeInterrupt()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_acknowledgeInterrupt
-+(tidsl_t * ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_disableDspHybridSelect()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_disableDspHybridSelect
-+(tidsl_t * ptidsl,
-+ unsigned int disable
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_disableDspHybridSelect()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_selectHybrid
-+(tidsl_t * ptidsl,
-+ unsigned int hybridNum
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_reportHybridMetrics()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_reportHybridMetrics
-+(tidsl_t * ptidsl,
-+ int     *metric
-+);
-+
-+/******************************************************************************************   
-+ * FUNCTION NAME:    dslhal_api_selectInnerOuterPair(tidsl_t *ptidsl, unsigned int pairSelect)   
-+ *   
-+ *******************************************************************************************   
-+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP   
-+ *   
-+ * INPUT:  PITIDSLHW_T *ptidsl   
-+ *          
-+ * RETURN: 0 SUCCESS   
-+ *         1 FAILED   
-+ *     
-+ *****************************************************************************************/   
-+
-+unsigned int dslhal_api_selectInnerOuterPair
-+(tidsl_t *ptidsl,
-+unsigned int pairSelect
-+);
-+
-+/******************************************************************************************   
-+ * FUNCTION NAME:    dslhal_api_resetTrainFailureLog(tidsl_t *ptidsl, unsigned int pairSelect)   
-+ *   
-+ *******************************************************************************************   
-+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP   
-+ *   
-+ * INPUT:  PITIDSLHW_T *ptidsl   
-+ *          
-+ * RETURN: 0 SUCCESS   
-+ *         1 FAILED   
-+ *     
-+ *****************************************************************************************/   
-+
-+unsigned int dslhal_api_resetTrainFailureLog
-+(tidsl_t *ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_controlLed()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureLed
-+(tidsl_t * ptidsl,
-+unsigned int idLed, 
-+unsigned int onOff
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureExternBert()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureExternBert
-+(tidsl_t * ptidsl,
-+unsigned int configParm, 
-+unsigned int parmVal
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureAtmBert()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureAtmBert
-+(tidsl_t * ptidsl,
-+unsigned int configParm, 
-+unsigned int parmVal
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureDgaspLpr()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureDgaspLpr
-+(tidsl_t * ptidsl,
-+unsigned int configParm, 
-+unsigned int parmVal
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_onOffPcb()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_onOffPcb
-+(tidsl_t * ptidsl,
-+unsigned int onOff
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_onOffBitSwap()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Turns on / off the power cutback feature; 
-+* Input
-+*         usDs;  0 = us  and 1 = ds;
-+*         onOff; 0 = OFF and 1 = ON
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_onOffBitSwap
-+(tidsl_t * ptidsl,
-+ unsigned int usDs, 
-+ unsigned int onOff
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_configDsTones()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Turns on / off specific tones in the downstream direction; 
-+* Input
-+*        pointer to the array specifying the tones to be turned on/off 
-+*        
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_configDsTones
-+(tidsl_t * ptidsl,
-+ unsigned int *dsTones
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_getAocBitSwapBuffer()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Fetches the Tx/Rx AOC bitswap Buffer; 
-+* Input
-+*        Transmit / Receive buffer to be fetched 
-+*        
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_getAocBitswapBuffer
-+(tidsl_t * ptidsl,
-+unsigned int usDs
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_readTrainingMessages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Reads all the training messages on demand; 
-+* Input
-+*        tidsl_t *ptidsl : Pointer to application structure
-+*        void *msgStruct : Pointer to Message Structure 
-+*        
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_readTrainingMessages
-+(tidsl_t * ptidsl,
-+void *msgPtr
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_getTrainingState()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Reads all the training messages on demand; 
-+* Input
-+*        tidsl_t *ptidsl : Pointer to application structure
-+*        void *msgStruct : Pointer to training state structure 
-+*        
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_getTrainingState
-+(tidsl_t * ptidsl,
-+void *statePtr
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_resetBitSwapMessageLog()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Clears the Aoc Bitswap Message Log 
-+* Input
-+*        tidsl_t *ptidsl : Pointer to application structure
-+*        unsigned int usDs ; Upstream=0, Downstream=1
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_resetBitSwapMessageLog
-+(tidsl_t * ptidsl, 
-+ unsigned int usDs
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_setConstellationBinNumber()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Specifies the bin number for which constellation data should be fetched
-+* Input
-+*        tidsl_t *ptidsl : Pointer to application structure
-+*        unsigned int binNum : constellation bin number whose data is required
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_setConstellationBinNumber
-+(tidsl_t * ptidsl, 
-+ unsigned int binNum
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_resetTrainStateHistory()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Clears the Training State History Log 
-+* Input
-+*        tidsl_t *ptidsl : Pointer to application structure
-+*        
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_resetTrainStateHistory
-+(tidsl_t * ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_getSnrPerBin()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Get SNR data per bin 
-+* Input
-+*        tidsl_t *ptidsl : Pointer to application structure
-+*        
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_getSnrPerBin
-+(tidsl_t * ptidsl,
-+ unsigned int snrBufferOpt
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_logEocMessages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Logs EOC messages sent by the Modem to the CO
-+* Input
-+*        tidsl_t *ptidsl : Pointer to application structure
-+*        unsigned int eocLowerBytes : Lower [1-5] bits of EOC Message
-+*        unsigned int eocUpperBytes : Upper [6-13] bits of EOC Message
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_logEocMessages
-+(tidsl_t * ptidsl, 
-+ unsigned int usDs,
-+ unsigned int eocLowerBytes, 
-+ unsigned int eocUpperBytes
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_getReasonForDrop()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Reads the reason for dropping DSL connection; 
-+* Input
-+*        tidsl_t *ptidsl : Pointer to application structure
-+
-+*        
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_getReasonForDrop
-+(tidsl_t * ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_ctrlMaxAvgFineGains()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Turns on / off the host control for Max Avg Fine Gains; 0 = OFF and 1 = ON
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_ctrlMaxAvgFineGains
-+(tidsl_t * ptidsl,
-+unsigned int onOff
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_setMaxAvgFineGain()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Set the Maximum Average Fine Gain Value
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_setMaxAvgFineGain
-+(tidsl_t * ptidsl,
-+ short fineGain
-+);
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_readPhySettings()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Reads the advanced Phy layer settings on demand; 
-+* Input
-+*        tidsl_t *ptidsl : Pointer to application structure
-+*        void *cfgStruct : Pointer to Phy Config Structure 
-+*        
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_readPhySettings
-+(tidsl_t * ptidsl,
-+void *cfgPtr
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_setBlackOutBits()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the Blackout Bits in the RMSGPCB message
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_setBlackOutBits
-+(tidsl_t * ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_genericDspRead()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*  Reads from a generic location in the host interface
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_genericDspRead
-+(tidsl_t * ptidsl,
-+ unsigned int offset1,
-+ unsigned int offset2,
-+ unsigned int offset3,
-+ unsigned char* localBuffer,
-+ unsigned int numBytes
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_genericDspWrite()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*  Writes to a generic location in the host interface
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_genericDspWrite
-+(tidsl_t * ptidsl,
-+ unsigned int offset1,
-+ unsigned int offset2,
-+ unsigned int offset3,
-+ unsigned char* localBuffer,
-+ unsigned int numBytes
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_dspInterfaceRead()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*  Reads from a generic location in the host interface
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_dspInterfaceRead
-+(tidsl_t * ptidsl,
-+ unsigned int baseAddr,
-+ unsigned int numOffsets,
-+ unsigned int *offsets,
-+ unsigned char* localBuffer,
-+ unsigned int numBytes
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_dspInterfaceWrite()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*  Writes to a generic location in the host interface
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_dspInterfaceWrite
-+(tidsl_t * ptidsl,
-+ unsigned int baseAddr,
-+ unsigned int numOffsets,
-+ unsigned int *offsets,
-+ unsigned char* localBuffer,
-+ unsigned int numBytes
-+);
-+
-+/******************************************************************************************     
-+ * FUNCTION NAME:    dslhal_api_sendMailboxCommand(tidsl_t *ptidsl, unsigned int cmd)     
-+ *     
-+ *******************************************************************************************     
-+ * DESCRIPTION: This fuction sends the passed mailbox command to the DSP     
-+ *     
-+ * INPUT:  PITIDSLHW_T *ptidsl     
-+ *         unsigned int cmd
-+ *            
-+ * RETURN: 0 SUCCESS     
-+ *         1 FAILED     
-+ *       
-+ *****************************************************************************************/     
-+unsigned int dslhal_api_sendMailboxCommand
-+(tidsl_t *ptidsl, 
-+unsigned int cmd
-+); 
-+
-+#ifdef INTERNAL_BUILD
-+#include <dsl_hal_internal_api.h>
-+#endif
-+
-+
-+#endif /* pairs #ifndef __DSL_APPLICATION_INTERFACE_H__ */
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_logtable.h linux.dev/drivers/atm/sangam_atm/dsl_hal_logtable.h
---- linux.old/drivers/atm/sangam_atm/dsl_hal_logtable.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_logtable.h	2005-08-23 04:46:50.097843696 +0200
-@@ -0,0 +1,259 @@
-+unsigned int log10[]=
-+{
-+           0,
-+         771,
-+        1221,
-+        1541,
-+        1789,
-+        1992,
-+        2163,
-+        2312,
-+        2443,
-+        2560,
-+        2666,
-+        2763,
-+        2852,
-+        2934,
-+        3011,
-+        3083,
-+        3150,
-+        3213,
-+        3274,
-+        3331,
-+        3385,
-+        3437,
-+        3486,
-+        3533,
-+        3579,
-+        3622,
-+        3664,
-+        3705,
-+        3744,
-+        3781,
-+        3818,
-+        3853,
-+        3887,
-+        3921,
-+        3953,
-+        3984,
-+        4015,
-+        4044,
-+        4073,
-+        4101,
-+        4129,
-+        4156,
-+        4182,
-+        4207,
-+        4232,
-+        4257,
-+        4281,
-+        4304,
-+        4327,
-+        4349,
-+        4371,
-+        4393,
-+        4414,
-+        4435,
-+        4455,
-+        4475,
-+        4495,
-+        4514,
-+        4533,
-+        4552,
-+        4570,
-+        4589,
-+        4606,
-+        4624,
-+        4641,
-+        4658,
-+        4675,
-+        4691,
-+        4707,
-+        4723,
-+        4739,
-+        4755,
-+        4770,
-+        4785,
-+        4800,
-+        4815,
-+        4829,
-+        4844,
-+        4858,
-+        4872,
-+        4886,
-+        4899,
-+        4913,
-+        4926,
-+        4939,
-+        4952,
-+        4965,
-+        4978,
-+        4990,
-+        5003,
-+        5015,
-+        5027,
-+        5039,
-+        5051,
-+        5063,
-+        5075,
-+        5086,
-+        5098,
-+        5109,
-+        5120,
-+        5131,
-+        5142,
-+        5153,
-+        5164,
-+        5174,
-+        5185,
-+        5195,
-+        5206,
-+        5216,
-+        5226,
-+        5236,
-+        5246,
-+        5256,
-+        5266,
-+        5275,
-+        5285,
-+        5295,
-+        5304,
-+        5313,
-+        5323,
-+        5332,
-+        5341,
-+        5350,
-+        5359,
-+        5368,
-+        5377,
-+        5386,
-+        5394,
-+        5403,
-+        5412,
-+        5420,
-+        5429,
-+        5437,
-+        5445,
-+        5454,
-+        5462,
-+        5470,
-+        5478,
-+        5486,
-+        5494,
-+        5502,
-+        5510,
-+        5518,
-+        5525,
-+        5533,
-+        5541,
-+        5548,
-+        5556,
-+        5563,
-+        5571,
-+        5578,
-+        5586,
-+        5593,
-+        5600,
-+        5607,
-+        5614,
-+        5622,
-+        5629,
-+        5636,
-+        5643,
-+        5649,
-+        5656,
-+        5663,
-+        5670,
-+        5677,
-+        5683,
-+        5690,
-+        5697,
-+        5703,
-+        5710,
-+        5716,
-+        5723,
-+        5729,
-+        5736,
-+        5742,
-+        5749,
-+        5755,
-+        5761,
-+        5767,
-+        5773,
-+        5780,
-+        5786,
-+        5792,
-+        5798,
-+        5804,
-+        5810,
-+        5816,
-+        5822,
-+        5828,
-+        5834,
-+        5839,
-+        5845,
-+        5851,
-+        5857,
-+        5862,
-+        5868,
-+        5874,
-+        5879,
-+        5885,
-+        5891,
-+        5896,
-+        5902,
-+        5907,
-+        5913,
-+        5918,
-+        5924,
-+        5929,
-+        5934,
-+        5940,
-+        5945,
-+        5950,
-+        5955,
-+        5961,
-+        5966,
-+        5971,
-+        5976,
-+        5981,
-+        5986,
-+        5992,
-+        5997,
-+        6002,
-+        6007,
-+        6012,
-+        6017,
-+        6022,
-+        6027,
-+        6031,
-+        6036,
-+        6041,
-+        6046,
-+        6051,
-+        6056,
-+        6060,
-+        6065,
-+        6070,
-+        6075,
-+        6079,
-+        6084,
-+        6089,
-+        6093,
-+        6098,
-+        6103,
-+        6107,
-+        6112,
-+        6116,
-+        6121,
-+        6125,
-+        6130,
-+        6134,
-+        6139,
-+        6143,
-+        6148,
-+        6152,
-+        6156,
-+        6161,
-+        6165
-+    };
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_register.h linux.dev/drivers/atm/sangam_atm/dsl_hal_register.h
---- linux.old/drivers/atm/sangam_atm/dsl_hal_register.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_register.h	2005-08-23 04:46:50.097843696 +0200
-@@ -0,0 +1,337 @@
-+#ifndef ___DSL_REGISTER_DEFINES_H___
-+#define ___DSL_REGISTER_DEFINES_H___ 1
-+
-+/*******************************************************************************
-+* FILE PURPOSE:     DSL HAL H/W Registers and Constant Declarations for Sangam
-+*
-+********************************************************************************
-+* FILE NAME:        dsl_hal_register.h
-+*
-+* DESCRIPTION:  
-+*       Contains DSL HAL APIs for Adam2 OS functions
-+*  
-+*                    
-+* (C) Copyright 2001-02, Texas Instruments, Inc.
-+*    History
-+*    Date        Version            Notes
-+*    06Feb03     0.00.00            RamP   Created
-+*    21Mar03     0.00.01            RamP   Changed header files for Modular 
-+*                                          build framework
-+*    21Mar03     0.00.02            RamP   Introduced malloc size for DSP f/w
-+*    07Apr03     0.00.03            RamP   Implemented new error reporting scheme
-+*                                          Changed Commenting to C style only
-+*    12Apr03     0.00.04            RamP   Added Interrupt Mask defines
-+*    14Apr03     0.00.05            RamP   Renamed macros for REG8, REG16 & REG32
-+*    21Apr03     0.01.00            RamP   Added Interrupt source/clear registers
-+*                                          Changed enum RSTATE_SHOWTIME to 5
-+*    24Apr03     0.01.01            RamP   Moved the RSTATE enum to api.h
-+*                                          Added olay recovery error condition
-+*    14May03     0.01.02            RamP   Added defines for power computation
-+*                                          Added error condition for hybrids
-+*    04Jun03     0.01.03            RamP   Added enum for config flags, 
-+*                                          Cleaned up AR5 register defines
-+*                                          Added defines for higher data rate
-+*    06Jun03     0.01.04            RamP   Added error & interrupt defines
-+*    09Jun03     0.01.05            RamP   Modified enum for current config
-+*                                          Added additional C-Rates defines
-+*    18Jul03     0.01.06            RamP   Modified internal build flow
-+*    21Aug03     0.01.07            RamP   Added constellation buffer size
-+*    08Oct03     0.01.08            RamP   Added us/ds Bits n gains size
-+*    12Oct03     0.01.08            RamP   Added ADSL2 Message sizes, lengths 
-+*                                          and offsets for various formats
-+*    29Oct03     0.01.09            RamP   Added ADSL2 Delt offsets & sizes
-+*    24Nov03     0.01.10            RamP   Added bit field number, scan vector
-+*    26Dec03     0.01.11            RamP   Removed the oamFeature masks to api.h
-+*******************************************************************************/
-+
-+#include "env_def_typedefs.h"
-+#ifdef INTERNAL_BUILD
-+#include "dev_host_internalinterface.h"
-+#endif
-+#include "dev_host_interface.h"
-+#include "dsl_hal_api.h"
-+
-+#define ADSLSS_BASE                                                     0x01000000
-+#define BBIF_BASE                                                       0x02000000
-+
-+#define ADSLSSADR                                                       (BBIF_BASE+0x0000)
-+#define ADSLSSADRMASK                                                   0xff000000
-+#define WAKEUP_DSP                                            0x00000001
-+
-+/* Ax7 Reset Control */
-+
-+#define RST_CNTRL_BASE                                                  0x8611600
-+#define RST_CNTRL_PRCR                                                  (RST_CNTRL_BASE + 0x00 )
-+
-+#define    RST_CNTRL_PRCR_GPIO                                  0x00000040
-+#define    RST_CNTRL_PRCR_ADSLSS                                0x00000080
-+#define    RST_CNTRL_PRCR_USB                                   0x00000100
-+#define    RST_CNTRL_PRCR_SAR                                   0x00000200
-+#define    RST_CNTRL_PRCR_DSP                                   0x00800000
-+#define    RST_CNTRL_PRCR_EMAC1                                 0x00200000      /* EMAC1 reset */
-+
-+#define    RST_CNTRL_SWRCR                                      (RST_CNTRL_BASE + 0x04 )
-+#define    RST_SWRCR_SWR0                                       0x00000001
-+#define    RST_SWRCR_SWR1                                       0x00000002
-+
-+#define    RST_CNTRL_RSR                                        (TNETD53XX_RST_CNTRL_BASE + 0x08 )
-+#define    RST_RSR_RSCAUSE                                      0x00000003   /* Software Reset Caused by writing to SWR1 bit */
-+
-+
-+/* ******************************************************
-+Interrupt sources on Ax7 interrupt controller.
-+The reserved sources are noted.
-+********************************************************* */
-+
-+#define INTR_CNTRL_SRC_SECOND                                   0
-+#define INTR_CNTRL_SRC_EXTERNAL0                                1
-+#define INTR_CNTRL_SRC_EXTERNAL1                                2
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_TIMER0                                   5
-+#define INTR_CNTRL_SRC_TIMER1                                   6
-+#define INTR_CNTRL_SRC_UART0                                    7
-+#define INTR_CNTRL_SRC_UART1                                    8
-+#define INTR_CNTRL_SRC_DMA0                                     9
-+#define INTR_CNTRL_SRC_DMA1                                     10
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_SAR                                      15
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_EMAC0                                    19
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_VLYNQ0                                   21
-+#define INTR_CNTRL_SRC_CODEC_WAKE                               22
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_USB                                      24
-+#define INTR_CNTRL_SRC_VLYNQ1                                   25
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_EMAC1                                    28
-+#define INTR_CNTRL_SRC_I2C                                      29
-+#define INTR_CNTRL_SRC_DMA2                                     30
-+#define INTR_CNTRL_SRC_DMA3                                     31
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_VDMA_RX                                  37
-+#define INTR_CNTRL_SRC_VDMA_TX                                  38
-+#define INTR_CNTRL_SRC_ADSLSS                                   39
-+
-+#ifndef K0BASE 
-+#define K0BASE                                                          0x80000000
-+#endif
-+
-+#ifndef K1BASE 
-+#define K1BASE                                                          0xA0000000
-+#endif
-+
-+#ifndef PHYS_ADDR
-+#define PHYS_ADDR(X)                                                    ((X) & 0X1FFFFFFF)
-+#endif
-+
-+#ifndef PHYS_TO_K0
-+#define PHYS_TO_K0(X)                                                   (PHYS_ADDR(X)|K0BASE)
-+#endif
-+
-+#ifndef PHYS_TO_K1
-+#define PHYS_TO_K1(X)                                                   (PHYS_ADDR(X)|K1BASE)
-+#endif
-+
-+#ifndef DSLHAL_REG8
-+#define DSLHAL_REG8( addr )                                          (*(volatile unsigned short *) PHYS_TO_K1(addr))
-+#endif
-+
-+#ifndef DSLHAL_REG16
-+#define DSLHAL_REG16( addr )                                         (*(volatile unsigned short *)PHYS_TO_K1(addr))
-+#endif
-+
-+#ifndef DSLHAL_REG32
-+#define DSLHAL_REG32( addr )                                         (*(volatile unsigned int *)PHYS_TO_K1(addr))
-+#endif
-+
-+#ifndef NULL
-+#define NULL    0
-+#endif
-+
-+#ifndef TRUE
-+#define TRUE    (1==1)
-+#endif
-+
-+#ifndef FALSE
-+#define FALSE   (1==2)
-+#endif
-+
-+/*******************************************************************************
-+* Type Defines for Library
-+********************************************************************************/
-+typedef unsigned int size_t;
-+
-+#define TIDSL_HW_CREATED                                                0x00000001
-+#define TIDSL_HW_OPENED                                                 0x00000002
-+#define TIDSL_HW_STARTED                                                0x00000004
-+#define TIDSL_OS_INITIALIZED                                            0x00000008
-+
-+/* Data Pump CRATES Table Defines */
-+#define SIZE_OF_CRATES1_TABLE                                           120
-+#define CRATES1_BF_LS0                                                  7
-+#define CRATES1_BI_LS0                                                  17
-+#define CRATES1_BF_AS0                                                  0
-+#define CRATES1_BI_AS0                                                  10
-+#define CRATES1_BF_DSRS                                                 20
-+#define CRATES1_BI_DSRS                                                 21
-+#define CRATES1_BFI_DSS                                                 22
-+#define CRATES1_BFI_DSI                                                 23
-+#define CRATES1_BF_USRS                                                 25
-+#define CRATES1_BI_USRS                                                 26
-+#define CRATES1_BFI_USS                                                 27
-+#define CRATES1_BFI_USI                                                 28
-+
-+#define FAST_PATH                                                       0
-+#define INTERLEAVED_PATH                                                1
-+
-+#define LINE_NOT_CONNECTED                                              0
-+#define LINE_CONNECTED                                                  1
-+#define LINE_DISCONNECTED                                               2 
-+#define LINE_NOT_TO_CONNECT                                             3 
-+
-+#define MAXSECTIONS                                                     125
-+
-+/*****************************************************************************************
-+ * Localstructure declarations
-+ *
-+ ****************************************************************************************/
-+enum
-+{
-+  DSLHAL_ERROR_NO_ERRORS,                /* 00 */
-+  DSLHAL_ERROR_UNRESET_ADSLSS,           /* 01 */
-+  DSLHAL_ERROR_RESET_ADSLSS,             /* 02 */
-+  DSLHAL_ERROR_UNRESET_DSP,              /* 03 */ 
-+  DSLHAL_ERROR_RESET_DSP,                /* 04 */    
-+  DSLHAL_ERROR_NO_FIRMWARE_IMAGE,        /* 05 */
-+  DSLHAL_ERROR_MALLOC,                   /* 06 */
-+  DSLHAL_ERROR_FIRMWARE_MALLOC,          /* 07 */
-+  DSLHAL_ERROR_DIAG_MALLOC,              /* 08 */
-+  DSLHAL_ERROR_OVERLAY_MALLOC,           /* 09 */
-+  DSLHAL_ERROR_CODE_DOWNLOAD,            /* 10 */
-+  DSLHAL_ERROR_DIAGCODE_DOWNLOAD,        /* 11 */
-+  DSLHAL_ERROR_BLOCK_READ,               /* 12 */  
-+  DSLHAL_ERROR_BLOCK_WRITE,              /* 13 */  
-+  DSLHAL_ERROR_MAILBOX_READ,             /* 14 */  
-+  DSLHAL_ERROR_MAILBOX_WRITE,            /* 15 */
-+  DSLHAL_ERROR_MAILBOX_NOMAIL,           /* 16 */
-+  DSLHAL_ERROR_MAILBOX_OVERFLOW,         /* 17 */
-+  DSLHAL_ERROR_INVALID_PARAM,            /* 18 */
-+  DSLHAL_ERROR_ADDRESS_TRANSLATE,        /* 19 */
-+  DSLHAL_ERROR_FIRMWARE_CRC,             /* 20 */
-+  DSLHAL_ERROR_FIRMWARE_OFFSET,          /* 21 */
-+  DSLHAL_ERROR_CONFIG_API_FAILURE,       /* 22 */ 
-+  DSLHAL_ERROR_EOCREG_API_FAILURE,       /* 23 */
-+  DSLHAL_ERROR_VERSION_API_FAILURE,      /* 24 */
-+  DSLHAL_ERROR_STATS_API_FAILURE,        /* 25 */
-+  DSLHAL_ERROR_MARGIN_API_FAILURE,       /* 26 */
-+  DSLHAL_ERROR_CTRL_API_FAILURE,         /* 27 */
-+  DSLHAL_ERROR_HYBRID_API_FAILURE,       /* 28 */
-+  DSLHAL_ERROR_MODEMENV_API_FAILURE,     /* 29 */
-+  DSLHAL_ERROR_INTERRUPT_FAILURE,        /* 30 */
-+  DSLHAL_ERROR_INTERNAL_API_FAILURE,     /* 31 */
-+  DSLHAL_ERROR_DIGIDIAG_FAILURE,         /* 32 */
-+  DSLHAL_ERROR_TONETEST_FAILURE,         /* 33 */
-+  DSLHAL_ERROR_NOISETEST_FAILURE,        /* 34 */
-+  DSLHAL_ERROR_MODEMSTATE,               /* 35 */
-+  DSLHAL_ERROR_OVERLAY_CORRUPTED         /* 36 */
-+};
-+ 
-+enum 
-+{
-+  CONFIG_FLAG_NOFLAG,                    /* 00 */
-+  CONFIG_FLAG_TRELLIS,                   /* 01 */
-+  CONFIG_FLAG_EC,                        /* 02 */
-+  CONFIG_FLAG_RS                         /* 03 */
-+};
-+
-+#define USE_EMIF_REV    0
-+#define USE_CVR_REV     1
-+#define TNETD53XX_MAXLOOP       10000
-+#define REVERB          0
-+#define MEDLEY          1
-+#define NONINTENSE      0
-+#define slavespace0 0xa1000000
-+
-+#define MASK_MAILBOX_INTERRUPTS 0x00000001
-+#define MASK_BITFIELD_INTERRUPTS 0x00000002
-+#define MASK_HEARTBEAT_INTERRUPTS 0x00000004
-+#define DSP_INTERRUPT_SOURCE_REGISTER  0x020007A0
-+#define DSP_INTERRUPT_CLEAR_REGISTER   0x020007A4
-+
-+#define DIGITAL_DIAG_MEMSIZE 1048576
-+#define CRC32_QUOTIENT 0x04c11db7
-+#define DSP_FIRMWARE_MALLOC_SIZE 0x7ffff
-+#define DSP_CONSTELLATION_BUFFER_SIZE 1024*4
-+#define LOG43125 9303
-+#define US_NOMINAL_POWER (-38)
-+#define US_BNG_LENGTH 32
-+#define DS_BNG_LENGTH 256
-+#define NUMBER_OF_BITFIELDS 4
-+#define BITFIELD_SCAN 0x80000000
-+
-+/* ADSL Message offsets from Host Interface Pointer */
-+
-+/* ADSL2 Messages Index and Length defines */
-+
-+#define CMSGFMT_INDEX      0
-+#define CMSGPCB_INDEX      1
-+#define RMSGFMT_INDEX      2
-+#define RMSGPCB_INDEX      3
-+#define RMSG1LD_INDEX     13
-+#define RMSG2LD_INDEX     14
-+#define RMSG3LD_INDEX     15
-+#define RMSG4LD_INDEX     16
-+#define RMSG5LD_INDEX     17
-+#define RMSG6LD_INDEX     18
-+#define RMSG7LD_INDEX     19
-+#define RMSG8LD_INDEX     20
-+#define RMSG9LD_INDEX     21
-+#define CMSG1LD_INDEX     22
-+#define CMSG2LD_INDEX     23
-+#define CMSG3LD_INDEX     24
-+#define CMSG4LD_INDEX     25
-+#define CMSG5LD_INDEX     26
-+#define CMSGPCB2_INDEX    28
-+#define CMSGPCB2L_INDEX   29
-+#define RMSGFMT2_INDEX    30
-+#define RMSGPCB2L_INDEX   31
-+#define CMSG1ADSL2_INDEX  32
-+#define RMSG1ADSL2_INDEX  33
-+#define CMSG2ADSL2_INDEX  34
-+#define RMSG2ADSL2_INDEX  35
-+#define CPARAMS_INDEX     36
-+#define RPARAMS_INDEX     37
-+
-+/* ADSL2 Message Sizes */
-+
-+#define CMSGFMT_SIZE       2
-+#define RMSGFMT_SIZE       2
-+#define CMSGPCB_SIZE       2
-+#define CMSGPCB2_SIZE      6    /* Annex A with Blackout */
-+#define CMSGPCB2L_SIZE    10    /* Annex B with Blackout */
-+#define RMSGPCB_SIZE      36
-+#define RMSG1LD_SIZE      16
-+#define RMSGxLD_SIZE     258
-+#define CMSG1LD_SIZE      16
-+#define CMSG2LD_SIZE     130
-+#define CMSG3LD_SIZE      66
-+#define CMSG4LD_SIZE      34
-+#define CMSG5LD_SIZE      34
-+#define CMSG1ADSL2_SIZE   24   
-+#define RMSG1ADSL2_SIZE    4
-+#define CMSG2ADSL2_SIZE    4
-+#define RMSG2ADSL2_SIZE   32
-+#define CPARAMS_SIZE     136 
-+#define RPARAMS_SIZE     808
-+
-+/* ADSL2 Plus Message Sizes (if Different from ADSL2) */
-+
-+#define RMSGPCB_P_SIZE     68
-+#define CMSG1ADSL2P_SIZE   40 /* With Blackout */
-+#define CPARAMS_PA_SIZE   168 
-+#define RPARAMS_PA_SIZE  2088
-+#define CPARAMS_PB_SIZE   296
-+#define RPARAMS_PB_SIZE  2088
-+
-+#endif /* pairs #ifndef ___DSL_REGISTER_DEFINES_H___ */
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_support.c linux.dev/drivers/atm/sangam_atm/dsl_hal_support.c
---- linux.old/drivers/atm/sangam_atm/dsl_hal_support.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_support.c	2005-08-23 04:46:50.100843240 +0200
-@@ -0,0 +1,2788 @@
-+/*******************************************************************************
-+* FILE PURPOSE:     DSL Driver API functions for Sangam
-+*********************************************************************************
-+* FILE NAME:        dsl_hal_support.c
-+*
-+* DESCRIPTION:  
-+*       Contains DSL HAL APIs for Modem Control
-+*  
-+*                    
-+* (C) Copyright 2001-02, Texas Instruments, Inc.
-+*    History
-+*    Date        Version            Notes
-+*    06Feb03     0.00.00            RamP   Created
-+*    21Mar03     0.00.01            RamP   Inserted byteswap functions
-+*    07Apr03     0.00.02            RamP   Implemented new error reporting scheme
-+*                                          Changed Commenting to C style only
-+*    12Apr03     0.00.03            RamP   Added function to set Interrupt Bit
-+*                                          Masks for bitfield & Mailboxes
-+*    14Apr03     0.00.04            RamP   Added function to process modem state
-+*                                          bit fields; renamed REG32 macros
-+*                                          Changed interrupt bit field settings
-+*    15Apr03     0.00.05            RamP   Fixed exit condition on dslShutdown
-+*    21Apr03     0.01.00            RamP   Fixed dslShutdown function & changed
-+*                                          loop counter for overlay byteswaps
-+*                (Alpha)                   Added cache writeback for overlays
-+*                                          Added function acknowledgeInterrupt
-+*    22Apr03     0.01.01            RamP   Moved acknowledgeInterrupt into api
-+*    24Apr03     0.01.02            RamP   Added function to compare crc32 with
-+*                                          pre-computed value as a recovery 
-+*                                          scheme for corrupt overlay pages
-+*    28Apr03     0.01.03            RamP   Fixed a parameter in crc32 fxn call
-+*    05May03     0.01.04            RamP   Fixed Message structure access in
-+*                                          writeHostMailbox function
-+*    14May03     0.01.05            RamP   Lookup to netService of dsp version
-+*                (alpha ++)                to determine pots/isdn service
-+*    21May03     0.01.06            RamP   Added support for CO profiles
-+*    29May03     0.01.07            RamP   Added critical section tabs for block
-+*                                          read/write operations
-+*                                          Added functions to reload overlay pages
-+*                                          and CO Profiles
-+*    04Jun03     0.01.08            RamP   Added state transition timing counters
-+*    06Jun03     0.01.09            RamP   Added Interrupt source parsing function
-+*                                          Interrupt masking for heartbeat added
-+*    09Jun03     0.01.10            RamP   Modified modem state bit field processing
-+*                                          for structure changes in ITIDSLHW
-+*                                          fixed problem in free memory for CO prof
-+*    18Jul03     0.01.11            RamP   Optimized free memory for CO profiles &
-+*                                          overlay pages in the supporting APIs  
-+*    28Jul03     0.02.00            RamP   Modified the process bitfield functn
-+*                                          for LED & Application State report
-+*    21Aug03     0.03.00            RamP   Added logic to allocate & communicate
-+*                                          memory for constellation buffer display
-+*    29Sep03     0.03.01            RamP   Added API switch calls to advcfg module
-+*                                          to abstract them from the API module
-+*    12Oct03     0.03.02            RamP   Added API to gather ADSL2 Messages
-+*    14Oct03     0.03.03            RamP   Added function to read CMsgsRA
-+*    23Oct03     0.03.04            RamP   Changed train history index to circular 
-+*                                          buffer upon rollover
-+*    29Oct03     0.03.05            RamP   Added Adsl2 Delt Message Parsing 
-+*    12Nov03     0.03.06            RamP   Fixed endianness issues with 
-+*                                          Constellation Display
-+*    14Nov03     0.03.07            RamP   Added function to gather CRates1/RRates1
-+*                                          before they get overwritten by CRatesRA
-+*    19Nov03     0.03.08            JohnP  Revised dslhal_support_aocBitSwapProcessing to
-+*                                          prevent duplicate ATU-R bitswaps going to ACT
-+*    24Nov03     0.03.09            RamP   Implemented detailed State Tracking through
-+*                                          Modem State bit fields for ADSL/2
-+*    12Dec03     0.03.10            RamP   Tokenized advanced configuration code
-+*    12Dec03     0.03.11            RamP   Added state reset upon IDLE
-+*    19Dec03     0.03.12            RamP   Added static adsl2 byteswap function for
-+*                                          handling pointer to pointer cases 
-+*                                          Changed adsl2 messages to correct pointer to 
-+*                                          pointer dereferencing problems in some OS
-+*    26Dec03     0.03.13            RamP   Setting Current Address for Constellation
-+*                                          buffer in addition to start address
-+*                                          Added additional check to overlay page malloc
-+*******************************************************************************/
-+#include "dsl_hal_register.h"
-+#include "dsl_hal_support.h"
-+
-+static unsigned int dslhal_support_adsl2ByteSwap32(unsigned int in32Bits);
-+
-+/******************************************************************************************
-+* FUNCTION NAME:     dslhal_support_unresetDslSubsystem
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This function unreset Dsl Subsystem
-+*
-+* INPUT:  None
-+*
-+* RETURN: 0 if Pass; 1 if Fail
-+*
-+*****************************************************************************************/
-+int  dslhal_support_unresetDslSubsystem(void)
-+{
-+  dprintf(4," dslhal_support_unresetDslSubsystem()\n");
-+  /* Put ADSLSS in to reset */
-+  DSLHAL_REG32(0xa8611a10) = 0x1;
-+  shim_osClockWait(64);
-+  dprintf(5,"Selected APLL Reg \n");
-+
-+  DSLHAL_REG32(0xa8610a90) = 0x4;
-+  shim_osClockWait(64);
-+  dprintf(5,"Enable Analog PLL \n"); 
-+
-+  DSLHAL_REG32(0xa8610a90) = 0x77fe;
-+  shim_osClockWait(64);
-+  dprintf(5,"Set PLL for DSP\n");
-+
-+  /*  DSLHAL_REG32(0xa8611600) = 0x007f1bdf;*/
-+  DSLHAL_REG32(0xa8611600) |= RST_CNTRL_PRCR_ADSLSS;
-+  shim_osClockWait(64);
-+  dprintf(5,"Brought ADSLSS out of Reset \n");
-+
-+  DSLHAL_REG32(0xa861090c) &= ~((1<<20)|(1<<21)|(1<<22)|(1<<23)|(1<<24)|(1<<25));
-+  shim_osClockWait(64);
-+  dprintf(5,"Configured GPIO 20-25 for McBSP \n"); 
-+
-+  /*DSLHAL_REG32(0xa8611600)           |= RST_CNTRL_PRCR_ADSLSS;*/
-+
-+  
-+  /*  DSLHAL_REG32(0xa8611a04) = 0x00000001; 
-+      shim_osClockWait(64); */
-+
-+  dprintf(4," dslhal_support_unresetDslSubsystem done\n");
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME:     dslhal_support_resetDslSubsystem
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This function unreset Dsl Subsystem
-+*
-+* INPUT:  None
-+*
-+* RETURN: 0 if Pass; 1 if Fail
-+*
-+*****************************************************************************************/
-+int  dslhal_support_resetDslSubsystem(void)
-+{
-+  dprintf(4, "dslhal_support_resetDslSubsystem \n");
-+  /* Put ADSLSS into reset */
-+  DSLHAL_REG32(0xa8611600) &= ~RST_CNTRL_PRCR_ADSLSS;
-+  shim_osClockWait(64);
-+  /*  DSLHAL_REG32(0xa8611a04) = 0x00000000;
-+      shim_osClockWait(64); */
-+  dprintf(4, "dslhal_support_resetDslSubsystem Done \n");
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_unresetDsp()
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction takes ax5 daugter board out of reset.
-+*
-+* INPUT:  None
-+*
-+* RETURN: 0  --successful.
-+*         1  --failed
-+*
-+*****************************************************************************************/
-+int dslhal_support_unresetDsp(void)
-+{
-+#ifdef PRE_SILICON
-+  /* unsigned char value; */
-+  int rc;
-+
-+  rc=dslhal_support_hostDspAddressTranslate((unsigned int)DEV_MDMA0_SRC_ADDR);
-+  if(rc==DSLHAL_ERROR_ADDRESS_TRANSLATE)
-+    {
-+    dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
-+    return DSLHAL_ERROR_ADDRESS_TRANSLATE;
-+    }
-+  dprintf(5,"MDMA SRC: %08x\n", rc);
-+  DSLHAL_REG32(rc) = 0x80000001;
-+  rc=dslhal_support_hostDspAddressTranslate((unsigned int)DEV_MDMA0_DST_ADDR);
-+  if(rc==DSLHAL_ERROR_ADDRESS_TRANSLATE)
-+    {
-+    dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
-+    return DSLHAL_ERROR_ADDRESS_TRANSLATE;
-+    }
-+  dprintf(5,"MDMA DST: %08x\n", rc);
-+  DSLHAL_REG32(rc) = 0x02090001;
-+  rc=dslhal_support_hostDspAddressTranslate((unsigned int)DEV_MDMA0_CTL_ADDR);
-+  if(rc== DSLHAL_ERROR_ADDRESS_TRANSLATE)
-+    {
-+    dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
-+    return DSLHAL_ERROR_ADDRESS_TRANSLATE;
-+    }
-+  dprintf(5,"MDMA CTL: %08x\n", rc);
-+  DSLHAL_REG32(rc) = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
-+                         DEV_MDMA_BURST1 | (1 << DEV_MDMA_LEN_SHF));
-+  /* statusMask = 0x00000010;*/
-+#else
-+  dprintf(4, "dslhal_support_unresetDsp()\n");
-+  
-+  /* Bring the DSP core out of reset */
-+  /* DSLHAL_REG32(0xa8611600) = 0x00ff1bdf; */
-+  DSLHAL_REG32(0xa8611600) |= RST_CNTRL_PRCR_DSP;
-+  shim_osClockWait(64);
-+  dprintf(5,"Brought DSP out of Reset \n");
-+  dprintf(6,"Current Contents of PRCR: 0x%x\n",(unsigned int)DSLHAL_REG32(0xa8611600));
-+  /* DSLHAL_REG32(0xa8611a0c) = 0x00000007;
-+     shim_osClockWait(64); */
-+#endif  
-+
-+  dprintf(4, "dslhal_support_unresetDsp() done\n");
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_resetDsp()
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction takes ax5 daugter board into reset.
-+*
-+* INPUT:  None
-+*
-+* RETURN: 0  --successful.
-+*         1  --failed
-+*
-+*****************************************************************************************/
-+int dslhal_support_resetDsp(void)
-+{
-+  dprintf(4, "dslhal_support_resetDsp \n");
-+  /* Put ADSLSS into reset */
-+  DSLHAL_REG32(0xa8611600) &= ~RST_CNTRL_PRCR_DSP;
-+  shim_osClockWait(64);
-+  dprintf(4, "dslhal_support_resetDsp Done \n");
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}  
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_hostDspAddressTranslate()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Maps ax5 daugter card dsp memory address to avalanche memory space
-+*
-+* Input: unsigned int addr,  dsp memory address.
-+*
-+* Return: >=0, unsigned int, mapped Avalanche address(VBUS address). 
-+*         -1,  mapping failed
-+*         
-+*
-+********************************************************************************************/
-+/* static unsigned int bbifmap0,bbifmap1; */
-+
-+unsigned int dslhal_support_hostDspAddressTranslate( unsigned int addr )
-+{
-+  unsigned int addrMap;
-+  /* This function should just be used to move the memory window of the ADSLSS */
-+  dprintf(5, "dslhal_support_hostDspAddressTranslate()\n");
-+  
-+  /*  select vbus to xbus memory  */
-+  /*  addrMap = addr & 0xff000000; */
-+  addrMap = addr & ADSLSSADRMASK;
-+  
-+  DSLHAL_REG32(ADSLSSADR) = addrMap;
-+  
-+  dprintf(6, "dslhal_support_hostDspAddressTranslate() done\n");
-+#ifdef PRE_SILICON
-+  return ((ADSLSS_BASE | (~ADSLSSADRMASK & addr))+ 0x00000100);
-+  /* Added 0x100 for Pre-Silicon VLNQ offset.. to be removed for Silicon */
-+#else
-+  return ((ADSLSS_BASE | (~ADSLSSADRMASK & addr)));
-+  /* Added 0x100 for Pre-Silicon VLNQ offset.. to be removed for Silicon */
-+#endif
-+
-+}
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_blockWrite
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This rouin simulates DSP memory write as done in ax5 pci nic card 
-+*
-+* INPUT:  void *buffer, data need to written
-+*         void *adde,   memory address to be written
-+*         size_t count, number of bytes to be written
-+*
-+* RETURN:  0 --succeeded
-+*          1 --Failed
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_blockWrite(void *buffer, void *addr, size_t count) 
-+{
-+  int rc, byteCnt=0;
-+  unsigned char* ptr;
-+  union 
-+    {
-+    unsigned char *cptr;
-+    short *sptr;
-+    int *iptr;
-+    } src;
-+  union 
-+    {
-+    int anint;                   /* DSP location */
-+    unsigned char *cptr;         /* to avoid casts */
-+    } dst;
-+  union
-+    {
-+    unsigned int anint;
-+    unsigned char byte[4];
-+    }data,dword,sword;
-+        
-+  /* Enter Critical Section */
-+  shim_osCriticalEnter();
-+
-+  dprintf(6, "dslhal_support_blockWrite\n");
-+  
-+  dprintf(6,"addr=0x%X, length=0x%X, buffer=0x%X\n", (unsigned int) addr, (unsigned int) count, (unsigned int)buffer); 
-+  
-+  src.cptr = (unsigned char*) buffer;      /* local buffer */
-+  dst.cptr = addr;        /* DSP memory location */
-+  
-+  /*Maps address first*/
-+  rc=dslhal_support_hostDspAddressTranslate((unsigned int)addr);
-+  dprintf(5, "NewAddr: %08x\n", rc);
-+  if(rc== DSLHAL_ERROR_ADDRESS_TRANSLATE)
-+    {
-+    dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
-+    return  DSLHAL_ERROR_ADDRESS_TRANSLATE;
-+    }
-+
-+  dst.cptr=(unsigned char *)rc;
-+  
-+  /* check wether address is at 32bits boundary */
-+  
-+  if ((dst.anint & 0x3) && count)
-+    {
-+    sword.anint = *(unsigned int*)((unsigned int)src.cptr & 0xfffffffc);
-+    dword.anint = DSLHAL_REG32((unsigned int)dst.cptr & 0xfffffffc);
-+    sword.anint = (unsigned int) dslhal_support_byteSwap32(sword.anint);
-+    dword.anint = (unsigned int) dslhal_support_byteSwap32(dword.anint);
-+    ptr = (unsigned char *)((unsigned int)dst.cptr & 0xfffffffc);
-+
-+    if((dst.anint & 3) ==3)     /* last byte of a dword */
-+      {
-+      dword.byte[3] = sword.byte[3];
-+      dst.anint++;            /* bump the address by one */
-+      byteCnt++;
-+      count--;  
-+      }
-+    
-+    if((dst.anint & 3) ==1)     /* second byte */
-+      {
-+        if(count>3)
-+          {
-+            dword.byte[3] = sword.byte[3];
-+            dst.anint++;
-+            count--;
-+            byteCnt++;
-+          }
-+        if(count>2)
-+          {
-+            dword.byte[2] = sword.byte[2];
-+            dst.anint++;
-+            count--;
-+            byteCnt++;
-+          }
-+        if(count)
-+          {
-+            dword.byte[1] = sword.byte[1];
-+            dst.anint++;
-+            count--;
-+            byteCnt++;
-+          }
-+      }
-+    
-+    if((dst.anint & 3) && (count >1))
-+      {
-+      dword.byte[2] = sword.byte[2];
-+      dword.byte[3] = sword.byte[3];
-+      byteCnt+=2;
-+      dst.anint += 2;         /* bump the address by two */
-+      count -= 2;             /* decrement the byte count by two */
-+      }
-+    
-+    if((dst.anint & 3) && (count==1))
-+      {
-+      dword.byte[2] = sword.byte[2];
-+      dst.anint++;
-+      byteCnt++;
-+      count--;
-+      }
-+    src.cptr = (char *)((unsigned int)src.cptr & 0xfffffffc); /* fix 032802 */
-+    dword.anint = dslhal_support_byteSwap32(dword.anint); 
-+    DSLHAL_REG32((unsigned int)ptr) = dword.anint;
-+    ptr = src.cptr;
-+    for(rc=0;rc<count;rc++)
-+      {
-+        *ptr = *(ptr+byteCnt);
-+        ptr++;
-+      }
-+    }
-+  
-+  /* the dst pointer should now be on a 32-bit boundary   */
-+
-+  while (count > 3) 
-+    {
-+     DSLHAL_REG32((unsigned int)dst.cptr) = dslhal_support_byteSwap32(*src.iptr);
-+     src.iptr++;                  /* bump the data pointer by four */
-+     dst.anint += 4;              /* bump the address by four */
-+     count -= 4;                  /* decrement the byte count by four */
-+     }
-+  
-+  /* write remaining bytes */
-+  if(count)
-+    {
-+    int i;
-+    
-+    data.anint= DSLHAL_REG32((unsigned int)dst.cptr);
-+    data.anint=dslhal_support_byteSwap32(data.anint);
-+    for (i=0; i< count; i++)
-+      {
-+        data.byte[i]=*(src.cptr+i);             
-+      }
-+    data.anint=dslhal_support_byteSwap32(data.anint);
-+    DSLHAL_REG32((unsigned int)dst.cptr) = data.anint;
-+    src.cptr +=count;
-+    dst.anint +=count;
-+    count=0;
-+    }
-+  dprintf(6, "dslhal_support_blockWrite done\n");
-+  /* Exit Critical Section */
-+  shim_osCriticalExit();
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}   /* end of dslhal_support_blockWrite() */
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_blockRead
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This rouin simulates DSP memory read as done in ax5 pci nic card
-+*
-+* INPUT:  void *addr,   memory address to be read
-+*         void *buffer, dat buffer to be filled with from memmory
-+*         size_t count, number of bytes to be written
-+*
-+* RETURN:  0 --succeeded
-+*          1 --Failed
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_blockRead(void *addr, void *buffer, size_t count) 
-+{
-+    int rc;
-+    union 
-+        {
-+        int anint;          /* DSP location */
-+        char *cptr;         /* to avoid casts */
-+        } src;
-+    union 
-+        {
-+        char byte[4];
-+        int anint;          /* DSP data */
-+        } data;
-+    union 
-+        {
-+        char *cptr;
-+        int *iptr;
-+        } dst;
-+
-+    /* Enter Critical Section */
-+    shim_osCriticalEnter();
-+
-+    dprintf(6,"dslhal_support_blockRead\n");
-+
-+  
-+    src.cptr = addr;        /* DSP memory location */
-+    dst.cptr = buffer;      /* local buffer */
-+
-+    dprintf(6, "Read addr=0x%X, size=0x%X\n", (unsigned int)addr, count);
-+
-+
-+    /*Maps address first*/
-+    rc=dslhal_support_hostDspAddressTranslate((unsigned int)addr);
-+    if(rc== DSLHAL_ERROR_ADDRESS_TRANSLATE)
-+      {
-+      dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
-+      return DSLHAL_ERROR_ADDRESS_TRANSLATE;
-+      }
-+
-+    src.cptr=(unsigned char *)rc;
-+
-+    /**********************************************
-+    *  if the source is NOT on a 32-bit boundary  *
-+    *  then we read the full word                 *
-+    *  and ignore the first part of it            *
-+    **********************************************/
-+
-+    if ((src.anint & 3) && count) 
-+        {
-+                unsigned int anword;
-+
-+                anword = DSLHAL_REG32((unsigned int)src.cptr & 0xfffffffc);
-+                data.anint = dslhal_support_byteSwap32(anword);
-+
-+        /************************************
-+        *  there is no need for case 0      *
-+        *  notice that there are no breaks  *
-+        *  each falls through to the next   *
-+        ************************************/
-+
-+        switch (src.anint & 3) 
-+                {
-+            case 1:
-+                /* use only byte[1-3] */
-+                *(dst.cptr++) = data.byte[1];
-+                src.anint++;
-+                count--;
-+            case 2:
-+                /* use byte[2-3] */
-+                if (count) 
-+                                {
-+                    *(dst.cptr++) = data.byte[2];
-+                    src.anint++;
-+                    count--;
-+                                }
-+            case 3:
-+                /* use byte[3] */
-+                if (count) 
-+                                {
-+                    *(dst.cptr++) = data.byte[3];
-+                    src.anint++;
-+                    count--;
-+                                }
-+                }
-+        }
-+
-+    /* the src pointer should now be on a 32-bit boundary */
-+    while (count > 3) 
-+        {
-+                unsigned int anword;
-+        
-+                anword=DSLHAL_REG32((unsigned int)src.cptr);
-+                
-+                *dst.iptr = dslhal_support_byteSwap32(anword);
-+        src.anint += 4;         /* bump the address by four */
-+        dst.iptr++;             /* bump the data pointer by four */
-+        count -= 4;             /* decrement the byte count by four */
-+        }
-+
-+    /*******************************
-+    *  if there's any count left   *
-+    *  then we read the next word  *
-+    *  and ignore the end of it    *
-+    *******************************/
-+    if (count) 
-+        {
-+                unsigned int anword;
-+
-+                anword= DSLHAL_REG32((unsigned int)src.cptr);
-+                data.anint = dslhal_support_byteSwap32(anword);
-+
-+        /************************************
-+        *  there is no need for case 0      *
-+        *  notice that there are no breaks  *
-+        *  each falls through to the next   *
-+        ************************************/
-+        switch (count) 
-+                {
-+            case 1:
-+                /* use byte[0] */
-+                *(dst.cptr++) = data.byte[0];
-+                src.anint++;
-+                count--;
-+                break;
-+            case 2:
-+                /* use byte[0-1] */
-+                *(dst.cptr++) = data.byte[0];
-+                *(dst.cptr++) = data.byte[1];
-+                src.anint +=2;
-+                count -= 2;
-+                break;
-+            case 3:
-+                /* use only byte[0-2] */
-+                *(dst.cptr++) = data.byte[0];
-+                *(dst.cptr++) = data.byte[1];
-+                *(dst.cptr++) = data.byte[2];
-+                src.anint +=3;
-+                count -= 3;
-+                break;
-+                }
-+        }
-+  /* Exit Critical Section */
-+  shim_osCriticalExit();
-+
-+  return DSLHAL_ERROR_NO_ERRORS;
-+  
-+}   /* end of dslhal_support_blockRead() */
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME:    dslhal_support_readDspMailbox
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Reads a message from the mailbox
-+*
-+* ARGUMENTS:   int *pcmd           Pointer to command read
-+*
-+* RETURNS:     0 if successful
-+*              1 if no mail
-+*              NZ otherwise
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_readDspMailbox(tidsl_t *ptidsl, int *pcmd, int *ptag, int *pprm1, int *pprm2) 
-+{
-+  int rc;
-+  int cmd;
-+  int tag;
-+  int prm1;
-+  int prm2;
-+  unsigned char dspOutInx;
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  DEV_HOST_mailboxControl_t mailboxControl;
-+  DEV_HOST_dspHostMsg_t dspMailboxMsg[DEV_HOST_DSPQUEUE_LENGTH];
-+  
-+  dprintf(6,"dslhal_support_readDspMailbox\n");
-+  
-+  /* get the DSP main pointer */
-+
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
-+                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+
-+  /* Read in the command/response buffer */
-+  dspOamSharedInterface.dspHostMailboxControl_p = (DEV_HOST_mailboxControl_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspHostMailboxControl_p);
-+  
-+ 
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspHostMailboxControl_p, 
-+                               &mailboxControl, sizeof(DEV_HOST_mailboxControl_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  
-+  /* Change the endianness of the Mailbox Pointer */
-+  mailboxControl.dspMsgBuf_p = (DEV_HOST_dspHostMsg_t *) dslhal_support_byteSwap32((unsigned int)mailboxControl.dspMsgBuf_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)mailboxControl.dspMsgBuf_p, 
-+                                     &dspMailboxMsg, (sizeof(DEV_HOST_dspHostMsg_t)*DEV_HOST_DSPQUEUE_LENGTH));
-+  
-+  if (rc) 
-+    return DSLHAL_ERROR_BLOCK_READ;
-+  /* Extract the command/response message index */
-+  mailboxControl.hostInInx &= 7;   
-+  mailboxControl.hostOutInx &= 7;
-+  mailboxControl.dspOutInx &= 7;
-+  mailboxControl.dspInInx &= 7;
-+  
-+  
-+  /* check for messages in the mailbox */
-+  
-+  if (mailboxControl.dspOutInx == mailboxControl.dspInInx) 
-+    {
-+    return DSLHAL_ERROR_MAILBOX_NOMAIL;
-+    /* no messages to read */ 
-+    }
-+  
-+  /* use bDRESPOutInx as index to DRESPMsgBuf */
-+  
-+  cmd = dspMailboxMsg[mailboxControl.dspOutInx].cmd;
-+  tag = dspMailboxMsg[mailboxControl.dspOutInx].tag;
-+  prm1= dspMailboxMsg[mailboxControl.dspOutInx].param1;
-+  prm2= dspMailboxMsg[mailboxControl.dspOutInx].param2;
-+  
-+  mailboxControl.dspOutInx++;      /* increment count */ 
-+  mailboxControl.dspOutInx &= 7;   /* only two bits */
-+  
-+  dspOutInx = mailboxControl.dspOutInx;
-+  
-+  /* Read in the command response buffer again to take care of changes */
-+  mailboxControl.dspOutInx = dspOutInx;
-+  rc = dslhal_support_blockWrite(&mailboxControl.dspOutInx, 
-+                                      &dspOamSharedInterface.dspHostMailboxControl_p->dspOutInx, sizeof(BYTE));
-+  
-+  if (rc) 
-+    return DSLHAL_ERROR_BLOCK_WRITE;
-+  
-+  /* Is the input parameter address non-zero*/
-+  
-+  if (pcmd)
-+    {
-+    *pcmd = cmd;
-+    }
-+  if (ptag) 
-+    {
-+    *ptag = tag;
-+    }
-+  if (pprm1)
-+    {
-+    *pprm1 = prm1;
-+    }
-+  if (pprm2)
-+    {
-+    *pprm2 = prm2;
-+    }
-+ 
-+  dprintf(6,"dslhal_support_readDspMailbox done\n");
-+  dprintf(6,"cmd=%d, tag=%d\n", cmd, tag);
-+  dprintf(6,"dslhal_support_readDspMailbox:cmd: 0x%x, tag=%d\n", cmd, tag);
-+  return DSLHAL_ERROR_NO_ERRORS;
-+  
-+} /* end of dslhal_support_readDspMailbox() */
-+
-+/*******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_writeHostMailbox
-+*
-+********************************************************************************************
-+* DESCRIPTION: Send a message to a mailbox
-+*
-+* ARGUMENTS:   int cmd             command to write
-+*              int tag             tag (currently unused)
-+*              int p1              parameter 1 (currently unused)
-+*              int p2              parameter 2 (currently unused)
-+*
-+* RETURNS:     0 if successful
-+*              NZ otherwise
-+*
-+*******************************************************************************************/
-+
-+int dslhal_support_writeHostMailbox(tidsl_t *ptidsl, int cmd, int tag, int p1, int p2) 
-+{
-+  int rc;
-+  int index;
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  DEV_HOST_mailboxControl_t mailboxControl;
-+  DEV_HOST_dspHostMsg_t hostMailboxMsg[DEV_HOST_HOSTQUEUE_LENGTH];
-+  unsigned char hostInInx;
-+  
-+  dprintf(6,"dslhal_support_writeHostMailbox:cmd: 0x%x, tag=%d\n", cmd, tag);
-+  
-+  dprintf(6,"cmd=%d, tag=%d\n", cmd, tag);  
-+  
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+  
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
-+                                sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  /* Read in the command/response buffer */
-+  dspOamSharedInterface.dspHostMailboxControl_p = (DEV_HOST_mailboxControl_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspHostMailboxControl_p);
-+  
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspHostMailboxControl_p, 
-+                                &mailboxControl, sizeof(DEV_HOST_mailboxControl_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  /* Change the endianness of the Mailbox Control Pointer */
-+  mailboxControl.hostMsgBuf_p = (DEV_HOST_dspHostMsg_t *) dslhal_support_byteSwap32((unsigned int)mailboxControl.hostMsgBuf_p);
-+  rc = dslhal_support_blockRead((PVOID)mailboxControl.hostMsgBuf_p, 
-+                                &hostMailboxMsg, (sizeof(DEV_HOST_dspHostMsg_t)*DEV_HOST_HOSTQUEUE_LENGTH));
-+  
-+  if (rc) 
-+    return DSLHAL_ERROR_BLOCK_READ;
-+  /* Extract the command/response message index */ 
-+  mailboxControl.hostInInx &= 7;       
-+  mailboxControl.hostOutInx &= 7;
-+  mailboxControl.dspOutInx &= 7;
-+  mailboxControl.dspInInx &= 7;
-+  
-+  /* make sure there's room in the mailbox */
-+  
-+  index = mailboxControl.hostInInx;
-+  mailboxControl.hostInInx++;
-+  mailboxControl.hostInInx &= 7;  
-+  hostInInx = mailboxControl.hostInInx;
-+  if (mailboxControl.hostInInx == mailboxControl.hostOutInx) 
-+    {
-+      /* mailbox is full */ 
-+      return DSLHAL_ERROR_MAILBOX_OVERFLOW;
-+    }
-+  
-+  /* use bOCMDInInx as index to OCMDMsgBuf */
-+  hostMailboxMsg[index].cmd = (BYTE) cmd;
-+  hostMailboxMsg[index].tag = (BYTE) tag;
-+  hostMailboxMsg[index].param1 = (BYTE) p1;
-+  hostMailboxMsg[index].param2 = (BYTE) p2;
-+  rc = dslhal_support_blockWrite(&hostMailboxMsg,
-+                                 (PVOID)mailboxControl.hostMsgBuf_p,
-+                                 sizeof(DEV_HOST_dspHostMsg_t)*DEV_HOST_HOSTQUEUE_LENGTH);
-+  if (rc)
-+    {
-+      dprintf(1,"dslhal_support_blockWrite failed\n");
-+      return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  rc = dslhal_support_blockWrite(&mailboxControl,
-+                                 &dspOamSharedInterface.dspHostMailboxControl_p,
-+                                 sizeof(DEV_HOST_mailboxControl_t));
-+  if (rc) 
-+    return DSLHAL_ERROR_BLOCK_WRITE;
-+  /* update the index */
-+  mailboxControl.hostInInx = hostInInx; 
-+  rc = dslhal_support_blockWrite(&mailboxControl.hostInInx,
-+                                 &dspOamSharedInterface.dspHostMailboxControl_p->hostInInx,
-+                                 sizeof(BYTE));
-+  if (rc) 
-+    return DSLHAL_ERROR_BLOCK_WRITE;
-+  
-+  dprintf(6,"dslhal_support_writeHostMailbox done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+ 
-+}  
-+/* end of dslhal_support_writeHostMailbox() */
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME:    dslhal_support_readTextMailbox
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Reads a message from the mailbox
-+*
-+* ARGUMENTS:   int *pcmd           Pointer to command read
-+*
-+* RETURNS:     0 if successful
-+*              1 if no mail
-+*              NZ otherwise
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_readTextMailbox(tidsl_t *ptidsl, int *pmsg1, int *pmsg2) 
-+{
-+  int rc;
-+  unsigned int msg1;
-+  unsigned int msg2;
-+  unsigned char textOutInx;
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  DEV_HOST_mailboxControl_t mailboxControl;
-+  DEV_HOST_textMsg_t textMailboxMsg[DEV_HOST_TEXTQUEUE_LENGTH];
-+  
-+  dprintf(6,"dslhal_support_readTextMailbox\n");
-+  
-+  /* get the DSP main pointer */
-+
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
-+                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+
-+  /* Read in the command/response buffer */
-+  dspOamSharedInterface.dspHostMailboxControl_p = (DEV_HOST_mailboxControl_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspHostMailboxControl_p);
-+  
-+ 
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspHostMailboxControl_p, 
-+                               &mailboxControl, sizeof(DEV_HOST_mailboxControl_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  
-+  /* Change the endianness of the Mailbox Pointer */
-+  mailboxControl.textMsgBuf_p = (DEV_HOST_textMsg_t *) dslhal_support_byteSwap32((unsigned int)mailboxControl.textMsgBuf_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)mailboxControl.textMsgBuf_p, 
-+                                     &textMailboxMsg, (sizeof(DEV_HOST_textMsg_t)*DEV_HOST_DSPQUEUE_LENGTH));
-+  
-+  if (rc) 
-+    return DSLHAL_ERROR_BLOCK_READ;
-+  /* Extract the command/response message index */
-+  
-+  mailboxControl.textInInx &= 7;   
-+  mailboxControl.textOutInx &= 7;
-+   
-+  /* check for messages in the mailbox */
-+  
-+  if (mailboxControl.textOutInx == mailboxControl.textInInx) 
-+    {
-+    return DSLHAL_ERROR_MAILBOX_NOMAIL;
-+    /* no messages to read */ 
-+    }
-+  
-+  /* use bDRESPOutInx as index to DRESPMsgBuf */
-+  
-+  msg1 = textMailboxMsg[mailboxControl.textOutInx].msgPart1;
-+  msg2 = textMailboxMsg[mailboxControl.textOutInx].msgPart2;
-+  msg1 = (unsigned int) dslhal_support_byteSwap32((unsigned int)msg1);
-+  msg2 = (unsigned int) dslhal_support_byteSwap32((unsigned int)msg2);
-+
-+  mailboxControl.textOutInx++;      /* increment count */ 
-+  mailboxControl.textOutInx &= 7;   /* only two bits */
-+  
-+  textOutInx = mailboxControl.textOutInx;
-+  
-+  /* Read in the command response buffer again to take care of changes */
-+
-+  mailboxControl.textOutInx = textOutInx;
-+  
-+  rc = dslhal_support_blockWrite(&mailboxControl.textOutInx, 
-+                                      &dspOamSharedInterface.dspHostMailboxControl_p->textOutInx, sizeof(BYTE));
-+  
-+  if (rc) 
-+    return DSLHAL_ERROR_BLOCK_WRITE;
-+  
-+  /* Is the input parameter address non-zero*/
-+  
-+  if (pmsg1)
-+    {
-+    *pmsg1 = msg1;
-+    }
-+  if (pmsg2) 
-+    {
-+    *pmsg2 = msg2;
-+    }
-+
-+  dprintf(6,"dslhal_support_readTextMailbox done\n");
-+  dprintf(6,"msgPart1=%d, msgPart2=%d\n", msg1, msg2);
-+  dprintf(6,"dslhal_support_readTextMailbox:Message Part1: 0x%x, tag=0x%x\n", msg1, msg2);
-+  return DSLHAL_ERROR_NO_ERRORS;
-+  
-+} /* end of dslhal_support_readTextMailbox() */
-+
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_hostDspCodeDownload()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   download DSP image from host memory to dsp memory
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_hostDspCodeDownload(tidsl_t * ptidsl)
-+{
-+
-+  unsigned int index;
-+  int rc = 0, i;
-+  unsigned char *iptr;             /* image pointer */
-+  unsigned int numbytes,olayXfer,olayStore;
-+  /*  unsigned int holdSecPhyAddr=0,holdSecVirtAddr; */
-+  unsigned int *olayStart;
-+  size_t len;             /* size of the file */
-+  size_t expoffset;       /* expected offset for next section header */
-+  unsigned short checksum;
-+  unsigned int crc32;
-+  unsigned char * image;
-+  char *tmp = (char *)DEV_HOST_DSP_OAM_POINTER_LOCATION;
-+  DEV_HOST_dspVersionDef_t        dspVersion;
-+#if SWTC 
-+  DEV_HOST_tcHostCommDef_t        TCHostCommDef;
-+#endif
-+  DEV_HOST_oamWrNegoParaDef_t     OamWrNegoParaDef;
-+  DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface, *pdspOamSharedInterface;
-+  DEV_HOST_olayDpDef_t            olayDpParms;
-+  DEV_HOST_profileBase_t          profileList;
-+#ifndef NO_ACT
-+  DEV_HOST_consBufDef_t           constDisp;
-+#endif
-+#if CO_PROFILES
-+  DEV_HOST_coData_t               coData;
-+#endif
-+  DEV_HOST_olayDpPageDef_t        olayDpPageDef[NUM_PAGES];
-+  union 
-+  {
-+  char byte[4];
-+  unsigned short hword[2];
-+  unsigned int aword;
-+  } data;
-+  
-+  struct _header
-+  {
-+  char signature[6];
-+  unsigned short sectcount;
-+  unsigned int length;
-+  } header;
-+  
-+  struct _section 
-+  {
-+  unsigned int addr;
-+  unsigned int length;
-+  unsigned int offset;
-+  unsigned int page;
-+  };/* section[MAXSECTIONS]; */
-+  
-+  struct _section *sptr;
-+  unsigned int secAddr, secLength, secOffset, secPage;
-+  
-+  
-+  dprintf(5,"dslhal_support_hostDspCodeDownload\n"); 
-+  image = ptidsl->fwimage;
-+  
-+  if (!image) 
-+    {
-+      dprintf(1,"no image file\n"); 
-+    return DSLHAL_ERROR_NO_FIRMWARE_IMAGE;
-+    }
-+  
-+  iptr=image;
-+  
-+  numbytes = sizeof(header); 
-+  
-+  shim_osMoveMemory((char *) &header, (char *)iptr, numbytes);
-+  header.length = dslhal_support_byteSwap32(header.length);
-+  header.sectcount = dslhal_support_byteSwap16(header.sectcount);
-+#if 0 
-+  crc32 = dslhal_support_computeCrc32((unsigned char*)&crcTest[0],20);
-+  dprintf(6,"CRC-32 for the crcTest: 0x%x",crc32);
-+  dprintf(4,"header.length=%d, header.sectcount=0x%X\n", header.length, header.sectcount);
-+#endif
-+  /* point to the checksum */
-+  /* compute the checksum on CRC32 here */
-+  iptr = image + header.length-4;
-+  numbytes = sizeof(data.aword);
-+  
-+  dprintf(5,"tiload: check checksum\n"); 
-+  shim_osMoveMemory((char *)&(data.byte), (char *)iptr, numbytes);
-+  
-+  crc32 = dslhal_support_computeCrc32(image,ptidsl->imagesize);
-+  dprintf(5,"CRC-32 for the Binary: 0x%x",crc32);
-+  /* CRC currently not added to the DSP binary, so this code is commented out */
-+  /* 
-+  data.aword = dslhal_support_byteSwap32(data.aword);
-+  if (data.aword != crc32) 
-+    {
-+      dprintf(1,"Checksum error\n");
-+    }
-+  */
-+  /* Verify signature - Changed from "320C6x" to "TIDSL" for load 80 */
-+  
-+  header.signature[5]='\0';
-+  dprintf(5, "signature=%s\n", header.signature);
-+  
-+  if (shim_osStringCmp(header.signature, "TIDSL")) 
-+    {
-+      dprintf(1,"Signature not match\n");
-+      return DSLHAL_ERROR_FIRMWARE_OFFSET;
-+    }
-+  
-+  dprintf(5,"tiload: check sect count\n");
-+  /* check section count */
-+ 
-+  if (header.sectcount > MAXSECTIONS) 
-+    {
-+      dprintf(1,"Section # %d exceeds max %d\n", header.sectcount, MAXSECTIONS);
-+      return DSLHAL_ERROR_FIRMWARE_OFFSET;
-+    } 
-+  else
-+    {
-+    dprintf(5,"found %d sections\n", header.sectcount);
-+    }
-+
-+  /* Validation of Section offsets */
-+  
-+  /* point to the first section */
-+  len = header.length;              /* file size in bytes */
-+  expoffset = sizeof(struct _header) + header.sectcount * sizeof(struct _section);
-+  
-+  dprintf(5,"tiload: check offset\n");
-+  for (index=0; index<header.sectcount; index++) /* parse the sections one by one */
-+    {
-+      numbytes = sizeof(struct _header) + index * sizeof(struct _section); /* Compute Section Offset */
-+      sptr = (struct _section *)(image + numbytes); /* Section Pointer to beginning of the section */
-+      
-+    secAddr   = dslhal_support_byteSwap32(sptr->addr);
-+    secOffset = dslhal_support_byteSwap32(sptr->offset);
-+    secLength = dslhal_support_byteSwap32(sptr->length);
-+    secPage   = dslhal_support_byteSwap32(sptr->page);
-+    
-+    /* validate offset */
-+    if ( secOffset== 0xffffffff) 
-+      {
-+      /* special case: zero fill */
-+      /* offset is valid, don't change expoffset */
-+      } 
-+    else 
-+      {
-+      if (secOffset > len-4) 
-+        {
-+          dprintf(5,"Offset error\n"); 
-+          return DSLHAL_ERROR_FIRMWARE_OFFSET;
-+        }
-+      
-+      /* determine expected offset of NEXT section  */
-+      expoffset = secLength + secOffset;
-+      
-+      /* all addresses must be on word boundaries */
-+      if (secAddr & 3) 
-+        {
-+          
-+        }
-+      }
-+    }
-+  
-+  /* check final offset - should just be a checksum left */
-+/* IMPORTANT 11/24/02 --> Got this error... but bypassed for Pf of Concept*/
-+  /*
-+  if (expoffset != len-4) 
-+    {
-+      dprintf(5,"Final offset error\n");
-+      return DSLHAL_ERROR_FIRMWARE_OFFSET;
-+    }
-+  */
-+
-+  /* Actual Code loading to DSP Memory */  
-+
-+  /* Initialize DSP Data Memory before code load*/
-+  dprintf(5,"Zero Prefill DSP DMEM\n");
-+  DSLHAL_REG32(ADSLSSADR)=0x80000000;
-+  shim_osZeroMemory((char *)0xa1000000, 0x10000);
-+  /* Load sections from the image */
-+  for (index=0; index<header.sectcount; index++) /* Parse each section */
-+    {
-+    numbytes = sizeof(header) + index * sizeof(struct _section); /* Compute offset to next section */
-+    sptr = (struct _section *)(image + numbytes);   /* Point to next section */
-+   
-+    secAddr   = dslhal_support_byteSwap32(sptr->addr);
-+    secOffset = dslhal_support_byteSwap32(sptr->offset);
-+    secLength = dslhal_support_byteSwap32(sptr->length);
-+    secPage   = dslhal_support_byteSwap32(sptr->page);
-+    
-+    data.aword = secAddr;
-+    checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3];
-+    
-+    data.aword = secLength;
-+    checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3];
-+    
-+    data.aword = secOffset;
-+    checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3];
-+    
-+    data.aword = secPage;
-+    checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3];
-+    
-+    
-+    /* validate offset */
-+    if (secOffset == 0xffffffff) 
-+      {
-+      /* special case: zero fill */
-+      /* offset is valid, don't change expoffset */
-+      } 
-+    else 
-+      {
-+      /* real offset */
-+      if(secOffset > len-4) 
-+        {
-+        dprintf(5,"section[%u] offset too big (%X/%X)\n", index,
-+                secOffset, len-4);
-+        
-+        return DSLHAL_ERROR_FIRMWARE_OFFSET;
-+        }
-+      
-+      /* determine expected offset of NEXT section */
-+      expoffset = secLength + secOffset;
-+      
-+      }
-+    
-+    }  
-+  
-+  /* check final offset - should just be a checksum left */
-+  /*
-+  if(expoffset != len-4) 
-+    {
-+      dprintf(1,"sections don't span full file (%X/%X)\n",expoffset,len-2);   
-+      return DSLHAL_ERROR_FIRMWARE_OFFSET;
-+    }
-+  */
-+  dprintf(5,"tiload: load binary\n");
-+  
-+  for (index=0; index<header.sectcount; index++)
-+    {
-+    numbytes = sizeof(header) + index * sizeof(struct _section);
-+    sptr = (struct _section *)(image + numbytes);  
-+    
-+    secAddr   = dslhal_support_byteSwap32(sptr->addr);
-+    secOffset = dslhal_support_byteSwap32(sptr->offset);
-+    secLength = dslhal_support_byteSwap32(sptr->length);
-+    secPage   = dslhal_support_byteSwap32(sptr->page);
-+    dprintf(5,"loading section %u\n", index);
-+    dprintf(5,"section %u: addr: %X\n", index, secAddr);
-+    dprintf(5,"section %u: length: %X\n", index, secLength);
-+    dprintf(5,"section %u: offset: %X\n", index, secOffset);
-+    dprintf(5,"section %u: page: %X\n", index, secPage);
-+
-+    /* point to the section's data */
-+    if(secOffset != 0xffffffff) 
-+      {
-+      /* Load this section of data */
-+      iptr = image + secOffset;
-+      dprintf(6, "iptr %8x\n", (unsigned int)iptr);
-+      }
-+    
-+    if(secPage)
-+      { 
-+      dprintf(6,"OVERLAY PAGE #%d\n",secPage);
-+      /* overlay page, don't write to dsp yet, save into host memory*/
-+
-+      dprintf(6,"Section Length: %d \n",secLength);
-+      ptidsl->olayDpPage[secPage].PmemStartWtAddr  = (unsigned int) shim_osAllocateDmaMemory(secLength);
-+      if(ptidsl->olayDpPage[secPage].PmemStartWtAddr == NULL)
-+       {
-+          dprintf(1, "overlay page allocate error\n");
-+          return DSLHAL_ERROR_OVERLAY_MALLOC;
-+        }
-+#ifdef PRE_SILICON
-+      ptidsl->olayDpPage[secPage].overlayHostAddr = ((((ptidsl->olayDpPage[secPage].PmemStartWtAddr)-0x84000000)-0x10000000)+0x030b0000);
-+#else
-+      /*      ptidsl->olayDpPage[secPage].overlayHostAddr = ((unsigned int)(ptidsl->olayDpPage[secPage].PmemStartWtAddr)&~0xe0000000); */
-+      ptidsl->olayDpPage[secPage].overlayHostAddr = virtual2Physical((unsigned int)ptidsl->olayDpPage[secPage].PmemStartWtAddr);
-+#endif
-+      dprintf(6,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->olayDpPage[secPage].PmemStartWtAddr,ptidsl->olayDpPage[secPage].overlayHostAddr);
-+
-+      ptidsl->olayDpPage[secPage].overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->olayDpPage[secPage].overlayHostAddr);
-+      ptidsl->olayDpPage[secPage].OverlayXferCount = secLength;
-+      ptidsl->olayDpPage[secPage].BinAddr          = secAddr;
-+      ptidsl->olayDpPage[secPage].SecOffset        = secOffset;
-+      shim_osMoveMemory((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, (char *)iptr, secLength);
-+      /*   RamP Image ByteSwap test */
-+      olayStart = (unsigned int *)ptidsl->olayDpPage[secPage].PmemStartWtAddr;
-+            
-+      for(olayXfer=0;olayXfer< secLength/4;olayXfer++)
-+        {
-+          olayStore = *(unsigned int *)olayStart;
-+          olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore);
-+          *(unsigned int*)olayStart = olayStore;
-+          dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore);
-+          olayStart++;
-+          olayStore=0;
-+        }
-+      /* RamP Image ByteSwap test */
-+      /* compute the CRC of each overlay page and Store the Checksum in a local global variable */
-+      /* This Value of CRC is to be compared with the header where all the CRC bytes are lumped together */
-+      ptidsl->olayDpPage[secPage].olayPageCrc32 = dslhal_support_computeCrc32((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, ptidsl->olayDpPage[secPage].OverlayXferCount);
-+
-+      shim_osWriteBackCache((void *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, secLength);
-+      }
-+    else
-+      {      
-+       rc = secAddr&0xff000000;
-+       if(rc && rc!=0x80000000)
-+        {
-+          dprintf(4,"Not DSP PMEM/DMEM\n");
-+          /* don't write to dsp, save into host memory*/
-+          dprintf(4,"Section Addr: %x Section Length: %d \n",secAddr,secLength);
-+          ptidsl->coProfiles.PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(secLength);
-+          if(ptidsl->coProfiles.PmemStartWtAddr == NULL)
-+          {
-+           dprintf(1, "memory allocate error\n");
-+           return DSLHAL_ERROR_OVERLAY_MALLOC;
-+          }
-+      ptidsl->coProfiles.overlayHostAddr =  virtual2Physical((unsigned int)ptidsl->coProfiles.PmemStartWtAddr);
-+      dprintf(4,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.overlayHostAddr);
-+      ptidsl->coProfiles.overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->coProfiles.overlayHostAddr);
-+      ptidsl->coProfiles.OverlayXferCount = secLength;
-+      ptidsl->coProfiles.BinAddr = secAddr;
-+      ptidsl->coProfiles.SecOffset = secOffset;
-+
-+      shim_osMoveMemory((char *)ptidsl->coProfiles.PmemStartWtAddr, (char *)iptr, secLength);
-+      /*   RamP Image ByteSwap test */
-+      olayStart = (unsigned int *)ptidsl->coProfiles.PmemStartWtAddr;
-+            
-+      for(olayXfer=0;olayXfer< secLength/4;olayXfer++)
-+        {
-+          olayStore = *(unsigned int *)olayStart;
-+          olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore);
-+          *(unsigned int*)olayStart = olayStore;
-+          dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore);
-+          olayStart++;
-+          olayStore=0;
-+        }
-+      shim_osWriteBackCache((void *)ptidsl->coProfiles.PmemStartWtAddr, secLength);
-+        }
-+      else
-+        {
-+      /* IMPORTANT: write image to DSP memory */
-+      rc=dslhal_support_blockWrite((void *)iptr, (void *)secAddr, secLength);
-+      if(rc)
-+        {
-+        dprintf(1,"dslhal_support_blockRead failed\n");
-+        return DSLHAL_ERROR_BLOCK_READ;
-+        }
-+       shim_osClockWait(0x50000);
-+      /*
-+      rc=dslhal_support_blockRead((void*)secAddr, (void*)tmpBuffer, secLength);
-+      if(rc)
-+        {
-+        dprintf(1,"dslhal_support_blockRead failed\n");
-+        return DSLHAL_ERROR_BLOCK_READ;
-+        }
-+      for(i=0;i<secLength;i++)
-+        {
-+        if(*iptr
-+        }*/
-+        }
-+      }
-+    } /* end of write dsp image */
-+
-+  /***********************************************************************************
-+   * Start to fillup various values to our hardware structure for late use
-+   ************************************************************************************/
-+  
-+  /* get main pointer for data */
-+
-+  rc = dslhal_support_blockRead(tmp, &pdspOamSharedInterface, sizeof(unsigned int));
-+  dprintf(5, "tmp=0x%X, addr=0x%X\n", (unsigned int)tmp, (unsigned int)pdspOamSharedInterface);
-+  pdspOamSharedInterface= (DEV_HOST_dspOamSharedInterface_t *)dslhal_support_byteSwap32((unsigned int)pdspOamSharedInterface);
-+  dprintf(5, "tmp=0x%X, addr=0x%X\n", (unsigned int)tmp, (unsigned int)pdspOamSharedInterface);
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  
-+  if(!pdspOamSharedInterface)
-+    {
-+    dprintf(1,"Couldn't read main pointer\n");
-+    return DSLHAL_ERROR_INVALID_PARAM;
-+    }
-+  
-+  ptidsl->pmainAddr=pdspOamSharedInterface;
-+
-+  /* read the OamSharedInterfaceStructure */
-+  
-+  dprintf(5,"ptidsl->hostIf.mainAddr=0x%X\n", (unsigned int)ptidsl->pmainAddr);
-+  
-+  /* get the pointer to DSP-OAM Shared Interface */
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
-+                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  /* Communicate the Allocated Memory Address to DSP to choose CO Profiles */
-+
-+  /* Change the Endianness of the profileList pointer */
-+  dspOamSharedInterface.profileList_p = (DEV_HOST_profileBase_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.profileList_p);
-+  /* Access the profileList Structure */
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.profileList_p,&profileList, sizeof(DEV_HOST_profileBase_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  dprintf(2,"Old Addr:%x  New: %x \n",profileList.hostProfileBase_p,ptidsl->coProfiles.overlayHostAddr); 
-+  profileList.hostProfileBase_p = (DEV_HOST_coData_t *)ptidsl->coProfiles.overlayHostAddr;
-+  rc = dslhal_support_blockWrite(&profileList,(PVOID)dspOamSharedInterface.profileList_p,sizeof(DEV_HOST_profileBase_t));
-+     if (rc) 
-+       return DSLHAL_ERROR_BLOCK_WRITE;
-+
-+  /* Communicate the Allocated Memory Address to DSP to do overlays */
-+
-+  /* Change the Endianness of the olayDpDef pointer */
-+  dspOamSharedInterface.olayDpParms_p = (DEV_HOST_olayDpDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.olayDpParms_p);
-+  /* Access the olayDpDef Structure */
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.olayDpParms_p,&olayDpParms, sizeof(DEV_HOST_olayDpDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+
-+
-+  for(i=1;i<NUM_PAGES;i++)
-+   {
-+  /* Change the endianness of the olayDpPageDef Pointer */
-+     olayDpParms.olayDpPage_p[i] = (DEV_HOST_olayDpPageDef_t *) dslhal_support_byteSwap32((unsigned int)olayDpParms.olayDpPage_p[i]);
-+     /* Access the olayDpPageDef Structure */
-+     rc = dslhal_support_blockRead((PVOID)olayDpParms.olayDpPage_p[i],&olayDpPageDef[i],sizeof(DEV_HOST_olayDpPageDef_t));
-+     if (rc) 
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     olayDpPageDef[i].overlayHostAddr = ptidsl->olayDpPage[i].overlayHostAddr;
-+     rc = dslhal_support_blockWrite(&olayDpPageDef[i],(PVOID)olayDpParms.olayDpPage_p[i],sizeof(DEV_HOST_olayDpPageDef_t));
-+     if (rc) 
-+       return DSLHAL_ERROR_BLOCK_WRITE;
-+   }
-+  
-+  /* Change the endianness of the Datapump Version Pointer */    
-+  dspOamSharedInterface.datapumpVersion_p = (DEV_HOST_dspVersionDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.datapumpVersion_p);
-+
-+  /* get DSPVersion itself */
-+   
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.datapumpVersion_p,&dspVersion, sizeof(DEV_HOST_dspVersionDef_t));
-+ 
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  
-+  /* table_dsp info */
-+#if SWTC
-+  dspOamSharedInterface.tcHostComm_p = (DEV_HOST_tcHostCommDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p);
-+  rc = dslhal_support_blockRead(&pdspOamSharedInterface->tcHostComm_p,
-+                                    &pTCHostCommDef, 4);
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  
-+    pTCHostCommDef=(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)pTCHostCommDef);
-+  
-+   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p, 
-+                               &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+#endif
-+  /* Select the Multimode Training */
-+  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.oamWriteNegoParams_p, &OamWrNegoParaDef, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+switch(dspVersion.netService)
-+  {
-+  case 1:  OamWrNegoParaDef.stdMode = MULTI_MODE;
-+           dprintf(5,"POTS Service \n");
-+           ptidsl->netService = 1;
-+           break;
-+  case 2:  OamWrNegoParaDef.stdMode = GDMT_MODE;
-+           dprintf(5,"ISDN Service \n");
-+           ptidsl->netService = 2;
-+           break;
-+  default: OamWrNegoParaDef.stdMode = T1413_MODE;
-+           dprintf(5,"Default Service \n");
-+           break;
-+  }
-+
-+   ptidsl->AppData.StdMode = (unsigned int)OamWrNegoParaDef.stdMode;
-+
-+   OamWrNegoParaDef.oamFeature = dslhal_support_byteSwap32((OAMFEATURE_TC_SYNC_DETECT_MASK));
-+  /* Set the flag to start retraining if the margin of the modem drops below 
-+     default margin during showtime */
-+  
-+  OamWrNegoParaDef.marginMonitorShwtme = FALSE; 
-+    /*  Set the flag to start retraining if the margin of the modem drops below default margin during training */
-+   
-+  OamWrNegoParaDef.marginMonitorTrning = FALSE;
-+  OamWrNegoParaDef.dsToneTurnoff_f = 0;
-+  dslhal_support_blockWrite(&OamWrNegoParaDef, 
-+                                 (PVOID)dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+  rc=dslhal_support_setInterruptMask(ptidsl,0);
-+  if(rc!=DSLHAL_ERROR_NO_ERRORS)
-+    return rc;
-+  /* Co Profile Test */
-+#if CO_PROFILES
-+  dspOamSharedInterface.profileList_p = (DEV_HOST_profileBase_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.profileList_p);
-+  /* Access the profileList Structure */
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.profileList_p,&profileList, sizeof(DEV_HOST_profileBase_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  profileList.hostProfileBase_p = (DEV_HOST_coData_t *)dslhal_support_byteSwap32((unsigned int)profileList.hostProfileBase_p);
-+  rc = dslhal_support_blockRead((PVOID)profileList.hostProfileBase_p,&coData, sizeof(DEV_HOST_coData_t));
-+  if (rc)
-+   {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  dprintf(2,"Current Profile Vendor Id: %x \n",coData.phyAgcPgaTarget);
-+  coData.phyAgcPgaTarget = 0xcaba;
-+  rc = dslhal_support_blockWrite(&coData,(PVOID)profileList.hostProfileBase_p,sizeof(DEV_HOST_coData_t));
-+  if(rc)
-+    return DSLHAL_ERROR_BLOCK_WRITE;
-+#endif
-+  /* End of CO Profile Test */
-+
-+#ifndef NO_ACT
-+  /* Constellation Display Buffer Allocate */
-+  ptidsl->constDisplay.PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(DSP_CONSTELLATION_BUFFER_SIZE);
-+  if(ptidsl->constDisplay.PmemStartWtAddr == NULL)
-+    {
-+      dprintf(1, "memory allocate error\n");
-+      return DSLHAL_ERROR_OVERLAY_MALLOC;
-+     }
-+  shim_osZeroMemory((void*)ptidsl->constDisplay.PmemStartWtAddr,DSP_CONSTELLATION_BUFFER_SIZE);
-+  ptidsl->constDisplay.overlayHostAddr =  virtual2Physical((unsigned int)ptidsl->constDisplay.PmemStartWtAddr);
-+      dprintf(4,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.overlayHostAddr);
-+      ptidsl->constDisplay.OverlayXferCount = DSP_CONSTELLATION_BUFFER_SIZE;
-+
-+  /* Communicate the Allocated Buffer for DSP load Constellation Data */
-+
-+  /* Change the Endianness of the profileList pointer */
-+  dspOamSharedInterface.consDispVar_p = (DEV_HOST_consBufDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.consDispVar_p);
-+  /* Access the profileList Structure */
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.consDispVar_p,&constDisp, sizeof(DEV_HOST_consBufDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  dprintf(2,"Constellation Old Addr:%x  New: %x \n",constDisp.consDispStartAddr,ptidsl->constDisplay.overlayHostAddr); 
-+  constDisp.consDispStartAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->constDisplay.overlayHostAddr);
-+  constDisp.consDispCurrentAddr = constDisp.consDispStartAddr;
-+  constDisp.consDispBufLen = (unsigned int)dslhal_support_byteSwap32(DSP_CONSTELLATION_BUFFER_SIZE);
-+  rc = dslhal_support_blockWrite(&constDisp,(PVOID)dspOamSharedInterface.consDispVar_p,sizeof(DEV_HOST_consBufDef_t));
-+     if (rc) 
-+       return DSLHAL_ERROR_BLOCK_WRITE;
-+#endif
-+  dprintf(5,"dslhal_support_hostDspCodeDownload() completed.\n");
-+  return DSLHAL_ERROR_NO_ERRORS;
-+  
-+}  /* end of dslhal_support_hostDspCodeDownload() */
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_readDelineationState()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   download DSP image from host memory to dsp memory
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_readDelineationState(tidsl_t * ptidsl)
-+{
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  DEV_HOST_atmStats_t           atmStats;
-+  DEV_HOST_dsAtmStats_t         dsAtmStats0;
-+  unsigned int rc=0, delinState=0;
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  
-+  dspOamSharedInterface.atmStats_p = (DEV_HOST_atmStats_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmStats_p);
-+  
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmStats_p,&atmStats, sizeof(DEV_HOST_atmStats_t));
-+  
-+  if (rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  
-+  atmStats.ds0_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds0_p);
-+  
-+  rc = dslhal_support_blockRead((PVOID)atmStats.ds0_p,&dsAtmStats0, (sizeof(DEV_HOST_dsAtmStats_t)));
-+
-+  if (rc) 
-+    return rc;
-+  delinState = dslhal_support_byteSwap32(dsAtmStats0.delineationState);
-+  if(delinState == TC_SYNC)
-+     ptidsl->lConnected = 1;
-+  else
-+     ptidsl->lConnected = 0;
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_processModemStateBitField()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   download DSP image from host memory to dsp memory
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_processModemStateBitField(tidsl_t * ptidsl)
-+{
-+  int rc, offset[2]={2,0};
-+  int modemStateBitFields[NUMBER_OF_BITFIELDS],changedField=0;
-+  rc = dslhal_api_dspInterfaceRead(ptidsl,(unsigned int)ptidsl->pmainAddr,2,(unsigned int *)&offset,
-+                                  (unsigned char *)&modemStateBitFields,NUMBER_OF_BITFIELDS*sizeof(int));
-+  if (rc)
-+    return DSLHAL_ERROR_BLOCK_READ;
-+  for(rc=0;rc<NUMBER_OF_BITFIELDS;rc++)
-+    dprintf(4,"Bit Field %d: 0x%x \n",rc+1,dslhal_support_byteSwap32((unsigned int)modemStateBitFields[rc]));
-+
-+  for(rc=NUMBER_OF_BITFIELDS;rc>0;rc--)
-+    {
-+     if(ptidsl->modemStateBitField[rc-1]!=modemStateBitFields[rc-1])
-+       {
-+         changedField = rc;
-+         break;
-+       }
-+    }
-+  if(changedField)
-+    {
-+      for(rc=0;rc<32;rc++)
-+        {
-+           if(modemStateBitFields[changedField-1] & dslhal_support_byteSwap32((BITFIELD_SCAN >> rc)))
-+             break;
-+         }
-+      dprintf(5,"Changed Field : %d  Changed Bit : %d \n",changedField,(31-rc));
-+      ptidsl->rState = ((changedField*100) + (31-rc));
-+      dprintf(5,"Modem State : %d \n",ptidsl->rState);
-+      shim_osMoveMemory((void *)ptidsl->modemStateBitField,(void *)modemStateBitFields, 4*NUMBER_OF_BITFIELDS);
-+    }
-+
-+  switch(changedField)
-+    {
-+    case 1:  if((ptidsl->rState >= ATU_RIDLE) && (ptidsl->AppData.bState < RSTATE_IDLE))
-+                   ptidsl->AppData.bState = RSTATE_IDLE;
-+             if((ptidsl->rState >= GDMT_NSFLR) && (ptidsl->AppData.bState < RSTATE_INIT))
-+                 ptidsl->AppData.bState = RSTATE_INIT;
-+             if((ptidsl->rState >= GDMT_ACKX) && (ptidsl->AppData.bState < RSTATE_HS))
-+                 ptidsl->AppData.bState = RSTATE_HS;
-+             break;
-+
-+    case 2:  if((ptidsl->rState >= T1413_NSFLR) && (ptidsl->AppData.bState < RSTATE_INIT))
-+                 ptidsl->AppData.bState = RSTATE_INIT;
-+             if((ptidsl->rState >= T1413_ACKX) && (ptidsl->AppData.bState < RSTATE_HS))
-+                 ptidsl->AppData.bState = RSTATE_HS;
-+             if((ptidsl->rState == ATU_RSHOWTIME) && (ptidsl->AppData.bState < RSTATE_SHOWTIME))
-+                 ptidsl->AppData.bState = RSTATE_SHOWTIME;
-+             break;
-+ 
-+    case 3:  if((ptidsl->rState >= ADSL2_COMB3) && (ptidsl->AppData.bState < RSTATE_INIT))
-+                 ptidsl->AppData.bState = RSTATE_INIT;
-+             if((ptidsl->rState >= ADSL2_RPARAMS) && (ptidsl->AppData.bState < RSTATE_HS))
-+                 ptidsl->AppData.bState = RSTATE_HS;
-+             break;
-+ 
-+    case 4:  break;
-+    default: break;
-+    }
-+
-+  ptidsl->stateTransition = modemStateBitFields[1];
-+  switch(ptidsl->AppData.bState)
-+    {
-+    case RSTATE_IDLE:       ptidsl->AppData.idleTick=shim_osClockTick();
-+                            ptidsl->AppData.initTick=0;
-+                            ptidsl->AppData.showtimeTick=0;
-+                            break;
-+    case RSTATE_HS:         if(!ptidsl->AppData.initTick)
-+                              {
-+                                ptidsl->AppData.initTick=shim_osClockTick();
-+                                }
-+                            ptidsl->AppData.showtimeTick=0;  
-+                            break;
-+    case RSTATE_SHOWTIME:   if(!ptidsl->AppData.showtimeTick)
-+                              ptidsl->AppData.showtimeTick=shim_osClockTick();
-+                            break;
-+    default:                break;
-+                              }
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_setInterruptMask()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_setInterruptMask(tidsl_t * ptidsl,unsigned int inputMask)
-+{
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  DEV_HOST_hostInterruptMask_t interruptMask;
-+  unsigned int rc=0;
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  dspOamSharedInterface.hostInterruptMask_p =(DEV_HOST_hostInterruptMask_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.hostInterruptMask_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.hostInterruptMask_p,
-+                                     &interruptMask, sizeof(DEV_HOST_hostInterruptMask_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  if(inputMask & MASK_MAILBOX_INTERRUPTS)
-+    {
-+      dprintf(7,"Mailbox Interrupts Masked \n");
-+      dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
-+      interruptMask.maskBitField1 |= dslhal_support_byteSwap32(MASK_MAILBOX_INTERRUPTS);
-+      dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
-+    }
-+  if(inputMask & MASK_BITFIELD_INTERRUPTS)
-+    {
-+      dprintf(7,"Bit field Interrupts Masked \n");
-+      dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
-+      interruptMask.maskBitField1 |= dslhal_support_byteSwap32(MASK_BITFIELD_INTERRUPTS);
-+      dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
-+    }
-+  if(inputMask & MASK_HEARTBEAT_INTERRUPTS)
-+    {
-+      dprintf(7,"Bit field Interrupts Masked \n");
-+      dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
-+      interruptMask.maskBitField1 |= dslhal_support_byteSwap32(MASK_HEARTBEAT_INTERRUPTS);
-+      dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
-+    }
-+  dslhal_support_blockWrite(&interruptMask, 
-+                                 dspOamSharedInterface.hostInterruptMask_p, sizeof(DEV_HOST_hostInterruptMask_t));
-+  dprintf(5,"dslhal_support_setInterruptMask() completed.\n");
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_parseInterruptSource()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Parses the Interrupt Source Bit Field
-+*
-+* Return: interrupt Code if successful
-+*         negative error code if failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_parseInterruptSource(tidsl_t * ptidsl)
-+{
-+  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+  DEV_HOST_hostInterruptSource_t interruptSource;
-+  unsigned int rc=0,intrCode=0;
-+  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+      dprintf(1,"dslhal_support_blockRead failed\n");
-+      return (0-DSLHAL_ERROR_BLOCK_READ);
-+    }
-+  dspOamSharedInterface.hostInterruptSource_p =(DEV_HOST_hostInterruptSource_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.hostInterruptSource_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.hostInterruptSource_p,
-+                                     &interruptSource, sizeof(DEV_HOST_hostInterruptSource_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return (0-DSLHAL_ERROR_BLOCK_READ);
-+    }
-+  if(interruptSource.sourceBitField1 & dslhal_support_byteSwap32(MASK_MAILBOX_INTERRUPTS))
-+    {
-+      dprintf(7,"Mailbox Interrupts Acknowledge \n");
-+      intrCode |= 0x00000011;
-+    }
-+  if(interruptSource.sourceBitField1 & dslhal_support_byteSwap32(MASK_BITFIELD_INTERRUPTS))
-+    {
-+      dprintf(7,"Bit field Interrupt Acknowledge \n");
-+      intrCode |= 0x00001002;
-+    }
-+  if(interruptSource.sourceBitField1 & dslhal_support_byteSwap32(MASK_HEARTBEAT_INTERRUPTS))
-+    {
-+      dprintf(7,"HeartBeat Interrupt Acknowledge \n");
-+      intrCode |= 0x00100004;
-+    }
-+  
-+  interruptSource.sourceBitField1 &=0x0;
-+  rc=dslhal_support_blockWrite(&interruptSource, 
-+                                 dspOamSharedInterface.hostInterruptSource_p, sizeof(DEV_HOST_hostInterruptSource_t));
-+  if(rc)
-+    return (0-DSLHAL_ERROR_BLOCK_WRITE);
-+  dprintf(5,"dslhal_support_parseInterruptSource() completed.\n");
-+  return intrCode;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_byteSwap16()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   input 16 bit short, byte swap from little endian to big endian or vise versa
-+*
-+********************************************************************************************/
-+
-+unsigned short dslhal_support_byteSwap16(unsigned short in16Bits)
-+{
-+    unsigned short out16Bits;
-+    
-+#ifdef EB
-+    unsigned char *pchar;
-+    unsigned char tmp;
-+#endif
-+    
-+    out16Bits = in16Bits;
-+
-+#ifdef EB    
-+    pchar = (unsigned char *)(&out16Bits);
-+    
-+    tmp = *pchar;
-+    *pchar = *(pchar + 1);
-+    *(pchar + 1) = tmp;
-+#endif
-+    
-+    return out16Bits;
-+    
-+} /* end of dslhal_support_byteSwap16() */
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_byteSwap32()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   input 32 bit int, byte swap from little endian to big endian or vise versa
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_byteSwap32(unsigned int in32Bits)
-+{
-+    int out32Bits;
-+
-+#ifdef EB
-+    unsigned char tmp;
-+    unsigned char *pchar;
-+#endif    
-+
-+    out32Bits = in32Bits;
-+    
-+#ifdef EB
-+    pchar = (unsigned char *)(&out32Bits);
-+    
-+    tmp = *pchar;
-+    *pchar = *(pchar + 3);
-+    *(pchar + 3) = tmp;
-+    
-+    tmp = *(pchar + 1);
-+    *(pchar + 1) = *(pchar + 2);
-+    *(pchar + 2) = tmp;
-+#endif
-+    
-+    return out32Bits;
-+    
-+} /* end of dslhal_support_byteSwap32() */
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_computeCrc32()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Computes the CRC-32 for the input data
-+*
-+* Return: 32 bit CRC of the input data
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_computeCrc32(unsigned char *data, int len)
-+{
-+    unsigned int        result;
-+    int                 i,j;
-+    unsigned char       octet;
-+   
-+    if ((len < 4) || (data==NULL))
-+        return(0xdeaddead);
-+    result = *data++ << 24;
-+    result |= *data++ << 16;
-+    result |= *data++ << 8;
-+    result |= *data++;
-+    result = ~ result;
-+
-+    len -=4;
-+
-+    for (i=0; i<len; i++)
-+    {
-+        octet = *(data++);
-+        for (j=0; j<8; j++)
-+        {
-+            if (result & 0x80000000)
-+            {
-+               result = (result << 1) ^ CRC32_QUOTIENT ^ (octet >> 7);
-+            }
-+            else
-+            {
-+               result = (result << 1) ^ (octet >> 7);
-+            }
-+            octet <<= 1;
-+        }
-+    }
-+    return ~result;            /* The complement of the remainder */
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_checkOverlayPage()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_checkOverlayPage(tidsl_t *ptidsl, unsigned int tag)
-+{
-+  unsigned int computedCrc;
-+  if((unsigned char *)ptidsl->olayDpPage[tag].PmemStartWtAddr == NULL)
-+  {
-+     dprintf(5,"Null Address for Page: %d\n",tag);
-+         return DSLHAL_ERROR_OVERLAY_MALLOC;
-+  }
-+  computedCrc = dslhal_support_computeCrc32((unsigned char *)ptidsl->olayDpPage[tag].PmemStartWtAddr, ptidsl->olayDpPage[tag].OverlayXferCount);
-+  dprintf(6,"\n Pre-Computed CRC32 = 0x%x \t Current CRC32 = 0x%x \n",ptidsl->olayDpPage[tag].olayPageCrc32,computedCrc); 
-+  if(computedCrc != ptidsl->olayDpPage[tag].olayPageCrc32)
-+      return DSLHAL_ERROR_OVERLAY_CORRUPTED;
-+  else
-+      return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_clearTrainingInfo()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_clearTrainingInfo(tidsl_t *ptidsl)
-+{
-+  int i;
-+  
-+  for(i=0; i<NUM_PAGES; i++)
-+    {
-+    if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL)
-+      {
-+      shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr, 
-+                   ptidsl->olayDpPage[i].OverlayXferCount);
-+      ptidsl->olayDpPage[i].PmemStartWtAddr =NULL;
-+      }
-+    }
-+  if(ptidsl->coProfiles.PmemStartWtAddr != NULL)
-+    {
-+     shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount);
-+     ptidsl->coProfiles.PmemStartWtAddr = NULL;
-+    }
-+  return 0;
-+}
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_reloadTrainingInfo()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Reload overlay pages from flash or memory
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_reloadTrainingInfo(tidsl_t * ptidsl)
-+{
-+
-+  int rc = 0, i;
-+  unsigned int olayXfer,olayStore;
-+  unsigned int *olayStart;
-+  
-+  unsigned int crc32;
-+  DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface;
-+  DEV_HOST_olayDpDef_t            olayDpParms;
-+  DEV_HOST_olayDpPageDef_t        olayDpPageDef[NUM_PAGES];
-+  DEV_HOST_profileBase_t          profileList;
-+  
-+  unsigned int secLength, secOffset, secPage;
-+
-+  /* co profile */
-+  secLength = ptidsl->coProfiles.OverlayXferCount;
-+  secOffset = ptidsl->coProfiles.SecOffset;
-+  ptidsl->coProfiles.PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(secLength);
-+  if(ptidsl->coProfiles.PmemStartWtAddr == NULL)
-+  {
-+    dprintf(1, "memory allocate error\n");
-+    return DSLHAL_ERROR_OVERLAY_MALLOC;
-+  }
-+          /* holdSecPhyAddr = virtual2Physical((unsigned int)holdSecVirtAddr); */
-+  ptidsl->coProfiles.overlayHostAddr =  virtual2Physical((unsigned int)ptidsl->coProfiles.PmemStartWtAddr);
-+  dprintf(4,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.overlayHostAddr);
-+  ptidsl->coProfiles.overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->coProfiles.overlayHostAddr);
-+  
-+  rc = shim_read_overlay_page((void *)ptidsl->coProfiles.PmemStartWtAddr, secOffset, secLength);
-+  if(rc != secLength)
-+  {
-+    dprintf(1, "shim_read_overlay_page failed\n");
-+    return DSLHAL_ERROR_OVERLAY_MALLOC;
-+  }
-+
-+  /*shim_osMoveMemory((char *)ptidsl->coProfiles.PmemStartWtAddr, (char *)iptr, secLength);*/
-+  /*   RamP Image ByteSwap test */
-+  olayStart = (unsigned int *)ptidsl->coProfiles.PmemStartWtAddr;
-+            
-+  for(olayXfer=0;olayXfer< secLength/4;olayXfer++)
-+  {
-+    olayStore = *(unsigned int *)olayStart;
-+    olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore);
-+    *(unsigned int*)olayStart = olayStore;
-+    dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore);
-+    olayStart++;
-+    olayStore=0;
-+  }
-+  shim_osWriteBackCache((void *)ptidsl->coProfiles.PmemStartWtAddr, secLength);
-+ 
-+
-+  for (secPage=1;secPage<NUM_PAGES; secPage++)
-+  {
-+
-+    dprintf(6,"OVERLAY PAGE #%d\n",secPage);
-+   
-+    secLength = ptidsl->olayDpPage[secPage].OverlayXferCount;
-+
-+    dprintf(4,"Section[%d] Length: %d \n",secPage, secLength);
-+
-+    secOffset = ptidsl->olayDpPage[secPage].SecOffset;
-+    ptidsl->olayDpPage[secPage].PmemStartWtAddr  = (unsigned int) shim_osAllocateDmaMemory(secLength);
-+    if(ptidsl->olayDpPage[secPage].PmemStartWtAddr == NULL)
-+    {
-+      dprintf(1, "overlay page allocate error\n");
-+      return DSLHAL_ERROR_OVERLAY_MALLOC;
-+    }
-+
-+    rc = shim_read_overlay_page((void *)ptidsl->olayDpPage[secPage].PmemStartWtAddr,secOffset, secLength);
-+    if(rc != secLength)
-+    {
-+      dprintf(1, "overlay page read error\n");
-+      return DSLHAL_ERROR_OVERLAY_MALLOC;
-+    }
-+
-+    /* ptidsl->olayDpPage[secPage].overlayHostAddr = ((unsigned int)(ptidsl->olayDpPage[secPage].PmemStartWtAddr)&~0xe0000000); */
-+    ptidsl->olayDpPage[secPage].overlayHostAddr = virtual2Physical((unsigned int)ptidsl->olayDpPage[secPage].PmemStartWtAddr);
-+    dprintf(6,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->olayDpPage[secPage].PmemStartWtAddr,ptidsl->olayDpPage[secPage].overlayHostAddr);
-+
-+    ptidsl->olayDpPage[secPage].overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->olayDpPage[secPage].overlayHostAddr);
-+    /*ptidsl->olayDpPage[secPage].OverlayXferCount = secLength;
-+      ptidsl->olayDpPage[secPage].BinAddr          = secAddr;
-+      shim_osMoveMemory((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, (char *)iptr, secLength);
-+    */
-+    olayStart = (unsigned int *)ptidsl->olayDpPage[secPage].PmemStartWtAddr;
-+            
-+    for(olayXfer=0;olayXfer< secLength/4;olayXfer++)
-+    {
-+      olayStore = *(unsigned int *)olayStart;
-+      olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore);
-+      *(unsigned int*)olayStart = olayStore;
-+      dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore);
-+      olayStart++;
-+      olayStore=0;
-+    }
-+      /* RamP Image ByteSwap test */
-+      /* compute the CRC of each overlay page and Store the Checksum in a local global variable */
-+      /* This Value of CRC is to be compared with the header where all the CRC bytes are lumped together */
-+    crc32 = dslhal_support_computeCrc32((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, ptidsl->olayDpPage[secPage].OverlayXferCount);
-+    if(crc32 != ptidsl->olayDpPage[secPage].olayPageCrc32)
-+      return DSLHAL_ERROR_OVERLAY_MALLOC;
-+
-+    shim_osWriteBackCache((void *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, secLength);
-+  }
-+
-+  
-+  dprintf(5,"ptidsl->hostIf.mainAddr=0x%X\n", (unsigned int)ptidsl->pmainAddr);
-+  
-+  /* get the pointer to DSP-OAM Shared Interface */
-+  rc = dslhal_support_blockRead(ptidsl->pmainAddr, &dspOamSharedInterface, 
-+                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+
-+  /* Communicate the Allocated Memory Address to DSP to choose CO Profiles */
-+
-+  /* Change the Endianness of the profileList pointer */
-+  dspOamSharedInterface.profileList_p = (DEV_HOST_profileBase_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.profileList_p);
-+  /* Access the profileList Structure */
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.profileList_p,&profileList, sizeof(DEV_HOST_profileBase_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+  dprintf(2,"Old Addr:%x  New: %x \n",profileList.hostProfileBase_p,ptidsl->coProfiles.overlayHostAddr); 
-+  profileList.hostProfileBase_p = (DEV_HOST_coData_t *)ptidsl->coProfiles.overlayHostAddr;
-+  rc = dslhal_support_blockWrite(&profileList,(PVOID)dspOamSharedInterface.profileList_p,sizeof(DEV_HOST_profileBase_t));
-+     if (rc) 
-+       return DSLHAL_ERROR_BLOCK_WRITE;
-+
-+  /* Communicate the Allocated Memory Address to DSP to do overlays */
-+
-+  /* Change the Endianness of the olayDpDef pointer */
-+  dspOamSharedInterface.olayDpParms_p = (DEV_HOST_olayDpDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.olayDpParms_p);
-+  /* Access the olayDpDef Structure */
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.olayDpParms_p,&olayDpParms, sizeof(DEV_HOST_olayDpDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+
-+
-+  for(i=1;i<NUM_PAGES;i++)
-+   {
-+  /* Change the endianness of the olayDpPageDef Pointer */
-+     olayDpParms.olayDpPage_p[i] = (DEV_HOST_olayDpPageDef_t *) dslhal_support_byteSwap32((unsigned int)olayDpParms.olayDpPage_p[i]);
-+     /* Access the olayDpPageDef Structure */
-+     rc = dslhal_support_blockRead((PVOID)olayDpParms.olayDpPage_p[i],&olayDpPageDef[i],sizeof(DEV_HOST_olayDpPageDef_t));
-+     if (rc) 
-+       return DSLHAL_ERROR_BLOCK_READ;
-+     olayDpPageDef[i].overlayHostAddr = ptidsl->olayDpPage[i].overlayHostAddr;
-+     rc = dslhal_support_blockWrite(&olayDpPageDef[i],(PVOID)olayDpParms.olayDpPage_p[i],sizeof(DEV_HOST_olayDpPageDef_t));
-+     if (rc) 
-+       return DSLHAL_ERROR_BLOCK_WRITE;
-+   }
-+  
-+  ptidsl->bOverlayPageLoaded = 1;
-+  return DSLHAL_ERROR_NO_ERRORS;
-+}  
-+  /* end of dslhal_support_reloadTrainingInfo() */
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_restoreTrainingInfo()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+
-+int dslhal_support_restoreTrainingInfo(tidsl_t *ptidsl)
-+{
-+  int rc;
-+  
-+  rc=1;
-+  while(rc != 0)
-+    {
-+    dslhal_support_clearTrainingInfo(ptidsl);
-+    //shim_osCriticalEnter();
-+    rc = dslhal_support_reloadTrainingInfo(ptidsl);
-+    //shim_osCriticalExit();
-+    shim_osClockWait(6400);
-+    }
-+  return 0;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_advancedIdleProcessing()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced Idle State Processing Functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_advancedIdleProcessing(tidsl_t *ptidsl)
-+{
-+  int rc=0;
-+  ptidsl->AppData.bState = RSTATE_IDLE;
-+#ifndef NO_ACT
-+  rc +=  dslhal_advcfg_resetBitSwapMessageLog(ptidsl,0);
-+  rc += dslhal_advcfg_resetBitSwapMessageLog(ptidsl,1);
-+  rc += dslhal_advcfg_resetTrainStateHistory(ptidsl);
-+  rc += dslhal_advcfg_getReasonForDrop(ptidsl);
-+#endif
-+  if(rc)
-+    return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+  else
-+    return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_aocBitSwapProcessing()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced Idle State Processing Functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_aocBitSwapProcessing(tidsl_t *ptidsl,unsigned int usDs)
-+{
-+  int rc=0;
-+#ifndef NO_ACT
-+  int i;
-+  int differentCmd_f;
-+  unsigned int dsSwapInx;
-+
-+  static UINT8 lastAturBitSwapCommands[6] = {0, 0, 0, 0, 0, 0};
-+  static UINT8 lastAturBitSwapBinNum[6] = {0, 0, 0, 0, 0, 0};
-+
-+  if (usDs == 0)
-+  {
-+    dprintf(4," DSP_XMITBITSWAP\n");
-+    rc += dslhal_advcfg_getAocBitswapBuffer(ptidsl,0);
-+    ptidsl->usBitSwapInx++;
-+    if (ptidsl->usBitSwapInx > 29)
-+      ptidsl->usBitSwapInx=0;
-+  }
-+
-+  if (usDs == 1)
-+  {
-+    dprintf(4," DSP_RCVBITSWAP\n");
-+    rc += dslhal_advcfg_getAocBitswapBuffer(ptidsl,1);
-+    differentCmd_f = FALSE;
-+    dsSwapInx = ptidsl->dsBitSwapInx;
-+    if (! rc)
-+    {
-+      for (i = 0; i < 6; i++)
-+      {
-+        if (lastAturBitSwapCommands[i] != ptidsl->dsBitSwap[dsSwapInx].bitSwapCommand[i])
-+        {
-+          differentCmd_f = TRUE;
-+          break;
-+        }
-+      }
-+      if (! differentCmd_f)
-+      {
-+        for (i = 0; i < 6; i++)
-+        {
-+          if (lastAturBitSwapBinNum[i] != ptidsl->dsBitSwap[dsSwapInx].bitSwapBinNum[i])
-+          {
-+            differentCmd_f = TRUE;
-+            break;
-+          }
-+        }
-+      }
-+      //CPE data pump seems to occasionally send us the same bit swap twice in a row with different sframe counter.
-+      //Since these are never counted twice by the debug output of AC5, we should not count them twice either.
-+      //So, we ignore the sframe_counter in determining whether the most recent bitswap is a duplicate.
-+      if (differentCmd_f)
-+      {
-+          shim_osMoveMemory((void *)lastAturBitSwapCommands, (void *)ptidsl->dsBitSwap[dsSwapInx].bitSwapCommand, 6);
-+          shim_osMoveMemory((void *)lastAturBitSwapBinNum, (void *)ptidsl->dsBitSwap[dsSwapInx].bitSwapBinNum, 6);
-+          ptidsl->dsBitSwapInx++;
-+          if (ptidsl->dsBitSwapInx > 29)
-+            ptidsl->dsBitSwapInx = 0;
-+      }
-+    }
-+  }
-+#endif
-+  if(rc)
-+    return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+  else
-+    return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherEocMessages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced EOC Buffering functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherEocMessages(tidsl_t *ptidsl,int usDs, int msgPart1, int msgPart2)
-+{
-+  int rc=0;
-+#ifndef NO_ACT
-+  rc = dslhal_advcfg_logEocMessages(ptidsl,usDs, msgPart1, msgPart2);
-+#endif
-+  if(rc)
-+    return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+  else
-+    return DSLHAL_ERROR_NO_ERRORS;
-+}
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherSnrPerBin()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced Snr per bin buffering Functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherSnrPerBin(tidsl_t *ptidsl,unsigned int snrParam)
-+{
-+  int rc=0;
-+#ifndef NO_ACT
-+  rc = dslhal_advcfg_getSnrPerBin(ptidsl,snrParam);
-+#endif
-+  if(rc)
-+    return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+  else
-+    return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_processTrainingState()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced Training State Processing Functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_processTrainingState(tidsl_t *ptidsl)
-+{
-+  int rc=0;
-+#ifndef NO_ACT
-+
-+  if(ptidsl->trainStateInx<120)
-+    {
-+     rc = dslhal_advcfg_getTrainingState(ptidsl,(void *)&ptidsl->trainHistory[ptidsl->trainStateInx++]);
-+     if(ptidsl->trainHistory[(ptidsl->trainStateInx-1)].subStateIndex ==
-+        ptidsl->trainHistory[(ptidsl->trainStateInx-2)].subStateIndex)
-+        ptidsl->trainStateInx--;
-+    }
-+  else
-+      ptidsl->trainStateInx = 0;
-+#endif
-+  if(rc)
-+    return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+  else
-+    return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherAdsl2Messages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Gathers ADSL2 Training Messages
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherAdsl2Messages(tidsl_t *ptidsl,int tag, int param1, int param2)
-+{
-+  int rc=0;
-+  unsigned int adsl2MsgLoc;
-+  switch(tag)
-+    {
-+    case CMSGFMT_INDEX:
-+       dprintf(5,"C-Msg-FMT rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, CMSGFMT_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2TrainingMessages.cMsgFmt,CMSGFMT_SIZE);
-+       break;
-+    case RMSGFMT_INDEX:  
-+    case RMSGFMT2_INDEX:
-+       dprintf(5,"R-Msg-FMT rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSGFMT_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2TrainingMessages.rMsgFmt,RMSGFMT_SIZE);
-+       break;
-+    case CMSGPCB_INDEX:
-+       dprintf(5,"C-Msg-PCB rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, CMSGPCB_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2TrainingMessages.cMsgPcb,CMSGPCB_SIZE);
-+       ptidsl->adsl2TrainingMessages.cMsgPcbLen = CMSGPCB_SIZE;
-+       break;
-+    case CMSGPCB2_INDEX:  
-+       dprintf(5,"C-Msg-PCB2 rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, CMSGPCB2_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2TrainingMessages.cMsgPcb,CMSGPCB2_SIZE);
-+       ptidsl->adsl2TrainingMessages.cMsgPcbLen = CMSGPCB2_SIZE;
-+#ifndef NO_ACT
-+       rc += dslhal_advcfg_setBlackOutBits(ptidsl);
-+#endif
-+       break;
-+    case CMSGPCB2L_INDEX:
-+       dprintf(5,"C-Msg-PCB2L rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, CMSGPCB2L_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2TrainingMessages.cMsgPcb,CMSGPCB2L_SIZE);
-+       ptidsl->adsl2TrainingMessages.cMsgPcbLen = CMSGPCB2L_SIZE;
-+       break;
-+    case RMSGPCB_INDEX:
-+    case RMSGPCB2L_INDEX:
-+       dprintf(5,"R-Msg-PCB rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSGPCB_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2TrainingMessages.rMsgPcb,RMSGPCB_SIZE);
-+       ptidsl->adsl2TrainingMessages.rMsgPcbLen = RMSGPCB_SIZE;
-+       break;
-+
-+    case CMSG1ADSL2_INDEX:
-+       dprintf(5,"C-Msg1 rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, CMSG1ADSL2_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2TrainingMessages.cMsg1,CMSG1ADSL2_SIZE);
-+       ptidsl->adsl2TrainingMessages.cMsg1Len = CMSG1ADSL2_SIZE;
-+       break;
-+    case CMSG2ADSL2_INDEX:
-+       dprintf(5,"C-Msg2 rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, CMSG2ADSL2_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2TrainingMessages.cMsg2,CMSG2ADSL2_SIZE);
-+       ptidsl->adsl2TrainingMessages.cMsg2Len = CMSG2ADSL2_SIZE;
-+       break;
-+    case RMSG1ADSL2_INDEX:
-+       dprintf(5,"R-Msg1 rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSG1ADSL2_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2TrainingMessages.rMsg1,RMSG1ADSL2_SIZE);
-+       ptidsl->adsl2TrainingMessages.rMsg1Len = RMSG1ADSL2_SIZE;
-+       break;
-+    case RMSG2ADSL2_INDEX:
-+       dprintf(5,"R-Msg2 rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSG2ADSL2_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2TrainingMessages.rMsg2,RMSG2ADSL2_SIZE);
-+       ptidsl->adsl2TrainingMessages.rMsg2Len = RMSG2ADSL2_SIZE;
-+       break;
-+    case CPARAMS_INDEX:
-+       dprintf(5,"C-Params rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, CPARAMS_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2TrainingMessages.cParams,CPARAMS_SIZE);
-+       ptidsl->adsl2TrainingMessages.cParamsLen = CPARAMS_SIZE;
-+       break;
-+    case RPARAMS_INDEX:
-+       dprintf(5,"R-Params rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RPARAMS_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2TrainingMessages.rParams,RPARAMS_SIZE);
-+       ptidsl->adsl2TrainingMessages.rParamsLen = RPARAMS_SIZE;
-+       break;
-+    case RMSG1LD_INDEX:
-+       dprintf(5,"R-Msg1 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSG1LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.rMsg1Ld,RMSG1LD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.rMsg1LdLen = RMSG1LD_SIZE;
-+       break;
-+    case RMSG2LD_INDEX:
-+       dprintf(5,"R-Msg2 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSG2LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.rMsg2Ld,RMSGxLD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+       break;
-+    case RMSG3LD_INDEX:
-+       dprintf(5,"R-Msg3 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSG3LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.rMsg3Ld,RMSGxLD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+       break;
-+    case RMSG4LD_INDEX:
-+       dprintf(5,"R-Msg4 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSG4LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.rMsg4Ld,RMSGxLD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+       break;
-+    case RMSG5LD_INDEX:
-+       dprintf(5,"R-Msg5 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSG5LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.rMsg5Ld,RMSGxLD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+       break;
-+    case RMSG6LD_INDEX:
-+       dprintf(5,"R-Msg6 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSG6LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.rMsg6Ld,RMSGxLD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+       break;
-+    case RMSG7LD_INDEX:
-+       dprintf(5,"R-Msg7 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSG7LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.rMsg7Ld,RMSGxLD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+       break;
-+    case RMSG8LD_INDEX:
-+       dprintf(5,"R-Msg8 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSG8LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.rMsg8Ld,RMSGxLD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+       break;
-+    case RMSG9LD_INDEX:
-+       dprintf(5,"R-Msg9 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, RMSG9LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.rMsg9Ld,RMSGxLD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+       break;
-+    case CMSG1LD_INDEX:
-+       dprintf(5,"C-Msg1 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, CMSG1LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.cMsg1Ld,CMSG1LD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.cMsg1LdLen = CMSG1LD_SIZE;
-+       break;
-+    case CMSG2LD_INDEX:
-+       dprintf(5,"C-Msg2 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, CMSG2LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.cMsg2Ld,CMSG2LD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.cMsg2LdLen = CMSG2LD_SIZE;
-+       break;
-+    case CMSG3LD_INDEX:
-+       dprintf(5,"C-Msg3 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, CMSG3LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.cMsg3Ld,CMSG3LD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.cMsg3LdLen = CMSG3LD_SIZE;
-+       break;
-+    case CMSG4LD_INDEX:
-+       dprintf(5,"C-Msg4 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, CMSG4LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.cMsg4Ld,CMSG4LD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.cMsg4LdLen = CMSG4LD_SIZE;
-+       break;
-+    case CMSG5LD_INDEX:
-+       dprintf(5,"C-Msg5 LD rec'd\n");
-+       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+                     (ptidsl, CMSG5LD_INDEX);
-+       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+             ptidsl->adsl2DiagnosticMessages.cMsg5Ld,CMSG5LD_SIZE);
-+       ptidsl->adsl2DiagnosticMessages.cMsg5LdLen = CMSG5LD_SIZE;
-+       break;
-+    default:
-+       dprintf(5,"Unknown ADSL2 Message rec'd\n");
-+       break;
-+    }
-+  if(rc)
-+    return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+  else
-+    return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_getAdsl2MessageLocation()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Gets the address to the ADSL2 Message being looked up
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_getAdsl2MessageLocation(tidsl_t *ptidsl,int msgOffset)
-+{
-+  int rc=0;
-+
-+  DEV_HOST_dspOamSharedInterface_t *pSharedInterface, sharedInterface;  
-+  DEV_HOST_dspWrNegoParaDef_t   dspNegoPara;
-+  int  adsl2MsgString, adsl2MsgAddr;
-+
-+  pSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+  rc += dslhal_support_blockRead(pSharedInterface, &sharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  sharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_adsl2ByteSwap32((unsigned int)sharedInterface.dspWriteNegoParams_p);
-+  rc += dslhal_support_blockRead((PVOID)sharedInterface.dspWriteNegoParams_p,&dspNegoPara, sizeof(DEV_HOST_dspWrNegoParaDef_t));
-+  
-+  if (rc)
-+    {
-+    dprintf(1,"dslhal_support_blockRead failed\n");
-+    return DSLHAL_ERROR_BLOCK_READ;
-+    }
-+
-+  adsl2MsgString = dslhal_support_adsl2ByteSwap32((unsigned int)dspNegoPara.adsl2DeltMsgs_p);
-+  dprintf(5,"ADSL2 Message String Address: 0x%x\n",adsl2MsgString);
-+  rc += dslhal_support_blockRead((PVOID)(adsl2MsgString +
-+                                  ((sizeof(unsigned char *)*msgOffset))),
-+                                  &adsl2MsgAddr, sizeof(int));
-+  adsl2MsgAddr = dslhal_support_adsl2ByteSwap32((unsigned int)adsl2MsgAddr);
-+  dprintf(5," Message Address: 0x%x\n",adsl2MsgAddr);
-+
-+       if(rc)
-+          return DSLHAL_ERROR_BLOCK_READ;
-+       else
-+          return adsl2MsgAddr;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_getCMsgsRa()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced Training Message functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_getCMsgsRa(tidsl_t *ptidsl,void *cMsg)
-+{
-+  int rc=0;
-+  DEV_HOST_raMsgsDef_t         raMsgParms;
-+  DEV_HOST_dspOamSharedInterface_t  dspOamSharedInterface;
-+  rc += dslhal_support_blockRead(ptidsl->pmainAddr, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+
-+  dspOamSharedInterface.raMsgs_p = (DEV_HOST_raMsgsDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.raMsgs_p);
-+
-+  rc += dslhal_support_blockRead((PVOID)dspOamSharedInterface.raMsgs_p, 
-+                               &raMsgParms, sizeof(DEV_HOST_raMsgsDef_t));
-+  shim_osMoveMemory((void *)cMsg,(void *)raMsgParms.cMsgsRaString,6);
-+  
-+  if(rc)
-+    return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+  else
-+    return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherRateMessages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*        Gathers Rate Training Messages
-+* Input
-+*        tidsl_t *ptidsl : Pointer to application structure
-+*        
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherRateMessages(tidsl_t * ptidsl)
-+{
-+  int rc;
-+  DEV_HOST_dspWrNegoParaDef_t  negoParms;
-+  DEV_HOST_dspOamSharedInterface_t  dspOamSharedInterface;
-+  
-+  dprintf(1, "dslhal_support_gatherRateMessages\n");
-+
-+  rc += dslhal_support_blockRead(ptidsl->pmainAddr, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+  dspOamSharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteNegoParams_p);
-+
-+  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteNegoParams_p, &negoParms, sizeof(DEV_HOST_dspWrNegoParaDef_t));
-+  if (rc)
-+    return DSLHAL_ERROR_BLOCK_READ;  
-+  else 
-+    {
-+      shim_osMoveMemory((void *)ptidsl->AppData.bCRates1, (void *)negoParms.cRates1, 120);
-+      shim_osMoveMemory((void *)ptidsl->AppData.bRRates1, (void *)negoParms.rRates1, 44);
-+    }
-+return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+static unsigned int dslhal_support_adsl2ByteSwap32(unsigned int in32Bits)
-+{
-+    int out32Bits=0; 
-+
-+#ifdef EB
-+  out32Bits = (in32Bits << 24);
-+  out32Bits |=((in32Bits & 0x0000ff00) << 8);
-+  out32Bits |=((in32Bits & 0xff000000) >> 24);
-+  out32Bits |=((in32Bits & 0x00ff0000) >> 8);    
-+#else
-+    out32Bits = in32Bits;
-+#endif
-+    
-+    return out32Bits;
-+
-+} /* end of dslhal_support_byteSwap32() */
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_support.h linux.dev/drivers/atm/sangam_atm/dsl_hal_support.h
---- linux.old/drivers/atm/sangam_atm/dsl_hal_support.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_support.h	2005-08-23 04:46:50.101843088 +0200
-@@ -0,0 +1,718 @@
-+#ifndef DSL_HAL_SUPPORT_H__
-+#define DSL_HAL_SUPPORT_H__ 1
-+
-+/*******************************************************************************
-+* FILE PURPOSE:     DSL Driver API functions for Sangam
-+*
-+********************************************************************************
-+* FILE NAME:        dsl_hal_functiondefines.c
-+*
-+* DESCRIPTION:  
-+*       Contains basic DSL HAL API declarations for Sangam
-+*  
-+*                    
-+* (C) Copyright 2001-02, Texas Instruments, Inc.
-+*    History
-+*    Date        Version            Notes
-+*    06Feb03     0.00.00            RamP   Created
-+*    21Mar03     0.00.01            RamP   Removed byteswap functions
-+*    21Mar03     0.00.02            RamP   Added extern osFreeVMemory declaration
-+*    10Apr03     0.00.03            RamP   Changed declaration for loadFWImage &
-+*                                          loadDebugFWImage to remove ptidsl param
-+*    12Apr03     0.00.04            RamP   Added function to set Interrupt Bit
-+*                                          Masks for bitfield & Mailboxes
-+*    14Apr03     0.00.05            RamP   Added modem state bit field processing
-+*    15Apr03     0.00.06            RamP   Added function osAllocateVMemory
-+*    21Apr03     0.01.00            RamP   Added function osAllocateDmaMemory
-+*                                          Added function osFreeDmaMemory
-+*                (Alpha)                   Added macro virtual2Physical, 
-+*    22Apr03     0.01.01            RamP   Moved acknowledgeInterrupt to api.h
-+*    24Apr03     0.01.02            RamP   Added checkOvelayPage function
-+*    29May03     0.01.03            RamP   Added critical enter/exit function decl
-+*    06Jun03     0.01.04            RamP   Added Interrupt source parsing function
-+*    06Oct03     0.01.05            RamP   Added function abstraction switches
-+*    12Oct03     0.01.06            RamP   Added ADSL2 Message function prototypes
-+*    14Nov03     0.03.07            RamP   Added function to gather Rate Messages
-+*******************************************************************************/
-+
-+#include "dsl_hal_api.h"
-+
-+#define virtual2Physical(a)    (((int)a)&~0xe0000000)
-+/* External Function Prototype Declarations */
-+
-+extern unsigned int shim_osGetCpuFrequency(void);
-+extern void shim_osClockWait(int val);
-+extern unsigned int shim_osClockTick(void);
-+
-+extern int shim_osStringCmp(const char *s1, const char *s2);
-+
-+extern void dprintf( int uDbgLevel, char * szFmt, ...);
-+
-+extern int shim_osLoadFWImage(unsigned char *firmwareImage);
-+extern int shim_osLoadDebugFWImage(unsigned char *debugFirmwareImage);
-+extern unsigned int shim_read_overlay_page(void *ptr, unsigned int secOffset, unsigned int secLength);
-+extern void shim_osMoveMemory(char *dst, char *src, unsigned int numBytes);
-+extern void shim_osZeroMemory(char *dst, unsigned int numBytes);
-+
-+extern void *shim_osAllocateMemory(unsigned int size);
-+extern void *shim_osAllocateVMemory(unsigned int size);
-+extern void *shim_osAllocateDmaMemory(unsigned int size);
-+
-+extern void shim_osFreeMemory(void *ptr, unsigned int size);
-+extern void shim_osFreeVMemory(void *ptr, unsigned int size);
-+extern void shim_osFreeDmaMemory(void *ptr, unsigned int size);
-+
-+extern void shim_osWriteBackCache(void *pMem, unsigned int size);
-+extern void shim_osCriticalEnter(void);
-+extern void shim_osCriticalExit(void);
-+
-+
-+/*******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_writeHostMailbox
-+*
-+********************************************************************************************
-+* DESCRIPTION: Send a message to a mailbox
-+*
-+* ARGUMENTS:   int cmd             command to write
-+*              int tag             tag (currently unused)
-+*              int p1              parameter 1 (currently unused)
-+*              int p2              parameter 2 (currently unused)
-+*
-+* RETURNS:     0 if successful
-+*              NZ otherwise
-+*
-+*******************************************************************************************/
-+
-+int dslhal_support_writeHostMailbox
-+(tidsl_t *ptidsl, 
-+ int cmd, 
-+ int tag, 
-+ int p1, 
-+ int p2);
-+
-+/********************************************************************************************
-+* FUNCTION NAME:    dslhal_support_readDspMailbox
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Reads a message from the mailbox
-+*
-+* ARGUMENTS:   int *pcmd           Pointer to command read
-+*
-+* RETURNS:     0 if successful
-+*              1 if no mail
-+*              NZ otherwise
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_readDspMailbox
-+(tidsl_t *ptidsl, 
-+ int *pcmd, 
-+ int *ptag, 
-+ int *pprm1, 
-+ int *pprm2);
-+
-+/********************************************************************************************
-+* FUNCTION NAME:    dslhal_support_readTextMailbox
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Reads a message from the mailbox
-+*
-+* ARGUMENTS:   int *pcmd           Pointer to command read
-+*
-+* RETURNS:     0 if successful
-+*              1 if no mail
-+*              NZ otherwise
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_readTextMailbox
-+(tidsl_t *ptidsl, 
-+ int *pmsg1, 
-+ int *pmsg2);
-+ 
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_blockRead
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This rouin simulates DSP memory read as done in ax5 pci nic card
-+*
-+* INPUT:  void *addr,   memory address to be read
-+*         void *buffer, dat buffer to be filled with from memmory
-+*         size_t count, number of bytes to be written
-+*
-+* RETURN:  0 --succeeded
-+*          1 --Failed
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_blockRead
-+(void *addr, 
-+ void *buffer, 
-+ size_t count);
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_blockWrite
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This rouin simulates DSP memory write as done in ax5 pci nic card 
-+*
-+* INPUT:  void *buffer, data need to written
-+*         void *adde,   memory address to be written
-+*         size_t count, number of bytes to be written
-+*
-+* RETURN:  0 --succeeded
-+*          1 --Failed
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_blockWrite
-+(void *buffer, 
-+ void *addr, 
-+ size_t count);
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_hostDspAddressTranslate
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This function moves the address window to translate physical address 
-+*
-+* INPUT:  unsigned int addr : address that requires translation
-+*
-+* RETURN:  Translated address or error condition
-+*          
-+*
-+*****************************************************************************************/
-+
-+unsigned int dslhal_support_hostDspAddressTranslate
-+( unsigned int addr 
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_unresetDslSubsystem
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This function unreset Dsl Subsystem
-+*
-+* INPUT:  None
-+*
-+* RETURN: 0 if Pass; 1 if Fail
-+*
-+*****************************************************************************************/
-+int dslhal_support_unresetDslSubsystem
-+(void
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_unresetDsp()
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction takes ax5 daugter board out of reset.
-+*
-+* INPUT:  None
-+*
-+* RETURN: 0  --successful.
-+*         1  --failed
-+*
-+*****************************************************************************************/
-+int dslhal_support_unresetDsp
-+(void
-+);
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_resetDslSubsystem
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This function unreset Dsl Subsystem
-+*
-+* INPUT:  None
-+*
-+* RETURN: 0 if Pass; 1 if Fail
-+*
-+*****************************************************************************************/
-+int dslhal_support_resetDslSubsystem
-+(void
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME:    dslhal_support_resetDsp()
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction takes ax5 daugter board out of reset.
-+*
-+* INPUT:  None
-+*
-+* RETURN: 0  --successful.
-+*         1  --failed
-+*
-+*****************************************************************************************/
-+int dslhal_support_resetDsp
-+(void
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_hostDspCodeDownload()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   download DSP image from host memory to dsp memory
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_hostDspCodeDownload
-+(tidsl_t * ptidsl 
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_digi_assignMemTestSpace()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Assigns Memory Space in SDRAM for External Memory Test 
-+* Input: tidsl_t *ptidsl
-+* 
-+* Return: 0    success
-+*         1    failed
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_digi_assignMemTestSpace
-+(tidsl_t *ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_digi_readMemTestResult()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Reads Results of External Memory Test 
-+* Input: tidsl_t *ptidsl
-+* 
-+* Return: 0    success
-+*         1    failed
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_digi_readMemTestResult
-+(tidsl_t *ptidsl,
-+unsigned int testResult
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_codeDownload()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Brings DSLSS out of Reset, Downloads Diag Firmware, 
-+*              brings DSP out of Reset 
-+* Input: tidsl_t *ptidsl
-+* 
-+* Return: 0    success
-+*         1    failed
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_codeDownload
-+(tidsl_t *ptidsl,
-+unsigned char* missingTones
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_setPgaParams()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+*              tones and Medley's with missing tones. These signals are defined in ITU 
-+*              G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+*        Tones selects the .
-+* Return: NULL
-+*         
-+********************************************************************************************/
-+
-+unsigned int  dslhal_diags_anlg_setPgaParams
-+(tidsl_t *ptidsl,
-+int agcFlag,
-+short pga1, 
-+short pga2, 
-+short pga3, 
-+short aeq
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_getRxNoisePower()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+*              tones and Medley's with missing tones. These signals are defined in ITU 
-+*              G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+*        Tones selects the .
-+* Return: NULL
-+*         
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_anlg_getRxNoisePower
-+(tidsl_t *ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_setMissingTones()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+*              tones and Medley's with missing tones. These signals are defined in ITU 
-+*              G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+*        Tones selects the .
-+* Return: NULL
-+*         
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_anlg_setMissingTones
-+(tidsl_t *ptidsl,
-+unsigned char* missingTones
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_readDelineationState()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   download DSP image from host memory to dsp memory
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_readDelineationState
-+(tidsl_t *ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_processModemStateBitField()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   download DSP image from host memory to dsp memory
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_processModemStateBitField
-+(tidsl_t *ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_setInterruptMask()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_setInterruptMask
-+(tidsl_t * ptidsl,
-+unsigned int inputMask
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_computeCrc32()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Computes the CRC-32 for the input data
-+*
-+* Return: 32 bit CRC of the input data
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_computeCrc32
-+(unsigned char *data, 
-+int len
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_checkOverlayPage()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_checkOverlayPage
-+(tidsl_t *ptidsl, 
-+unsigned int tag
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_restoreTrainingInfo()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_restoreTrainingInfo(tidsl_t * ptidsl);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_reloadTrainingInfo()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_reloadTrainingInfo(tidsl_t * ptidsl);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_clearTrainingInfo()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_clearTrainingInfo(tidsl_t * ptidsl);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_parseInterruptSource()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Sets the host interrupt bit masks
-+*
-+* Return: 0  success
-+*         1  failed
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_parseInterruptSource(tidsl_t * ptidsl);
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_advancedIdleProcessing()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced Idle State Processing Functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_advancedIdleProcessing(tidsl_t *ptidsl);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_aocBitSwapProcessing()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced Bitswap buffer Processing Functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_aocBitSwapProcessing(tidsl_t *ptidsl,unsigned int usDs);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherEocMessages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced EOC Buffering functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherEocMessages(tidsl_t *ptidsl,int usDs, int msgPart1, int msgPart2);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherSnrPerBin()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced Snr per bin buffering Functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherSnrPerBin(tidsl_t *ptidsl,unsigned int snrParm);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_processTrainingState()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced Training State Processing Functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_processTrainingState(tidsl_t *ptidsl);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherAdsl2Messages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced EOC Buffering functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherAdsl2Messages(tidsl_t *ptidsl,int msgTag, int param1, int param2);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_getAdsl2MsgLocation()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Gets the address to the ADSL2 Message being looked up
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_getAdsl2MessageLocation(tidsl_t *ptidsl,int msgOffset);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_getCMsgsRa()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Calls Advanced Training Message functions
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_getCMsgsRa(tidsl_t *ptidsl,void *cMsg);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherRateMessages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   Gathers Advanced Training Messages
-+*
-+* Return: Error Condition (if any)
-+*      
-+* 
-+* NOTE: 
-+*   DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherRateMessages(tidsl_t *ptidsl);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_byteSwap16()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* byteswap a short  
-+* 
-+* INPUT: 
-+* Return: NULL
-+*
-+********************************************************************************************/
-+
-+unsigned short dslhal_support_byteSwap16(unsigned short in16Bits);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_byteSwap32()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+*   byteswap a word
-+* 
-+* INPUT: 
-+* Return: NULL
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_byteSwap32(unsigned int in32Bits);
-+
-+#endif /* Pairs #ifndef DSL_HAL_FUNCTIONDEFINES_H__ */
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_version.h linux.dev/drivers/atm/sangam_atm/dsl_hal_version.h
---- linux.old/drivers/atm/sangam_atm/dsl_hal_version.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_version.h	2005-08-23 04:46:50.102842936 +0200
-@@ -0,0 +1,94 @@
-+#ifndef __SYSSW_VERSION_H__
-+#define __SYSSW_VERSION_H__ 1
-+
-+/*******************************************************************************
-+* FILE PURPOSE:     DSL Driver API functions for Sangam
-+*
-+********************************************************************************
-+* FILE NAME:        dsl_hal_basicapi.c
-+*
-+* DESCRIPTION:  
-+*       Contains basic DSL HAL APIs for Sangam
-+*  
-+* (C) Copyright 2003-04, Texas Instruments, Inc.
-+*    History
-+*    Date        Version            Notes
-+*    14May03     0.00.00            RamP   Original Version Created
-+*    14May03     0.00.01            RamP   Initial Rev numbers inserted 
-+*    14May03     0.00.02            RamP   Bumped version numbers for Dsl Hal
-+*                                          & dhalapp for alpha plus
-+*    19May03     0.00.03            MCB    Bumped dslhal version number
-+*                                          because of dependant changes
-+*                                          wrt. linux-nsp atm drivers.
-+*    22May03     0.00.04            RamP   Bumped dslhal & dhalapp buildnum
-+*                                          for inner/outer pair & DGASP code
-+*    06Jun03     0.00.05            RamP   Bumped up buildnum for LED, STM, 
-+*                                          interrupt processing, statistics
-+*                                          and other pre-beta features
-+*    09Jun03     0.00.06            JEB    Fixed error in DHALAPP bugfix/buildnum
-+*    09Jun03     0.00.07            RamP   Bumped up buildnum for incremental
-+*                                          changes to apis, statistics, memory
-+*                                          fixes, parameter configurations
-+*    11Jun03     0.00.08            RamP   Bumped up buildnum for Co profile
-+*                                          free memory fix
-+*    12Jun03     0.00.09            JEB    Bumped version numbers for AR7 1.00 Beta
-+*    02Jul03     0.00.10            ZT     Bumped HAL version for overlay page
-+*    18Jul03     0.00.11            RamP   Bumped HAL version for analog diags
-+*    22Jul03     0.00.12            JEB    Bumped DHALAPP buildnum for analog diags
-+*    31Jul03     0.00.13            RamP   Bumped HAL version for engr. drop
-+*    04Aug03     0.00.14            JEB    Bumped HAL version buildnum for CHECKPOINT65 changes
-+*                                          Bumped LINUX version buildnum for CHECKPOINT65 changes
-+*    06Aug03     0.00.15            MCB    Bumped all version numbers in prep for AR7 1.0 R2 release for POTS.
-+*    13Aug03     0.00.16            MCB    Set rev id's for D3/R1.1 (ADSL2).
-+*    21Aug03     0.00.17            JEB    Bumped up build numbers for merge of code additions from D1
-+*    26Sep03     0.00.18            JEB    Set rev id's for another D3/R1 (ADSL2).
-+*    14Oct03     0.00.19            JEB    Bumped Linux minor number and reset bugfix number for release.
-+*                                          Bumped build numbers on DSLHAL and DHALAPP for this checkpoint.
-+*    14Oct03     0.00.20            JEB    Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT15.
-+*    21Oct03     0.00.21            JEB    Bumped build number on DSLHAL for CHECKPOINT16.
-+*    22Oct03     0.00.22            MCB    Bumped all version numbers in support of D3R1 release.
-+*    27Oct03     0.00.23            JEB    Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT19.
-+*                                          Updated version for DSLAGENT to be 02.01.00.01 for ACT 2.1 R0.
-+*    30Oct03     0.00.24            JEB    Bumped bugfix number on LINUXATM Version for next release.
-+*                                          Bumped build numbers on DSLHAL and DHALAPP
-+*    31Oct03     0.00.25            MCB    Bumped all version numbers in support of D3R2 release.
-+*    14Nov03     0.00.26            JEB    Bumped build numbers on DSLHAL and DHALAPP
-+*                                          Changed version for DSLAGENT to be 02.00.01.01 for an ACT 2.0 R0
-+*    20Nov03     0.00.27            JEB    Bumped build number on DSLHAL.
-+*                                          Changed version for DSLAGENT to be 02.00.02.00 for the next ACT 2.0 R2
-+*    21Nov03     0.00.28            MCB    Bumped all version numbers in support of D3R2 release.
-+*    21Nov03     0.00.29            JEB    Bumped build numbers on DSLHAL and DHALAPP for D3-R0 drop on 11/21.
-+*    16Dec03     0.00.30            JEB    Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT31.
-+*    21Dec03     0.00.31            MCB    Bumped all version numbers in support of D3R2 release.
-+*    05Jan04     0.00.32            JEB    Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 34.
-+*    15Jan04     0.00.33            JEB    Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 36.
-+*    26Jan04     0.00.34            JEB    Changed Linux ATM version number to be 04.02.03.00.
-+*    27Jan04     0.00.35            MCB    Bumped all version numbers in support of D3R2 release.
-+*******************************************************************************/
-+
-+/* Dsl Hal API Version Numbers */
-+#define DSLHAL_VERSION_MAJOR       03
-+#define DSLHAL_VERSION_MINOR       00
-+#define DSLHAL_VERSION_BUGFIX      06
-+#define DSLHAL_VERSION_BUILDNUM    00
-+#define DSLHAL_VERSION_TIMESTAMP   00
-+
-+/* dhalapp Adam2 Application Version Numbers */
-+#define DHALAPP_VERSION_MAJOR      03
-+#define DHALAPP_VERSION_MINOR      00
-+#define DHALAPP_VERSION_BUGFIX     05
-+#define DHALAPP_VERSION_BUILDNUM   00
-+
-+/* Linux ATM Driver Version Numbers */
-+#define LINUXATM_VERSION_MAJOR     04
-+#define LINUXATM_VERSION_MINOR     02
-+#define LINUXATM_VERSION_BUGFIX    04
-+#define LINUXATM_VERSION_BUILDNUM  00
-+
-+/* DSL Agent Version Numbers */
-+#define DSLAGENT_VERSION_MAJOR     02
-+#define DSLAGENT_VERSION_MINOR     00
-+#define DSLAGENT_VERSION_BUGFIX    02
-+#define DSLAGENT_VERSION_BUILDNUM  00
-+
-+#endif /* pairs with #ifndef __SYSSW_VERSION_H__ */
-diff -urN linux.old/drivers/atm/sangam_atm/ec_errors_cpaal5.h linux.dev/drivers/atm/sangam_atm/ec_errors_cpaal5.h
---- linux.old/drivers/atm/sangam_atm/ec_errors_cpaal5.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/ec_errors_cpaal5.h	2005-08-23 04:46:50.102842936 +0200
-@@ -0,0 +1,118 @@
-+/***************************************************************************
-+ Copyright(c) 2001, Texas Instruments Incorporated. All Rights Reserved.
-+
-+ FILE:  ec_errors.h
-+
-+ DESCRIPTION:
-+   This file contains definitions and function declarations for
-+   error code support.
-+
-+ HISTORY:
-+   14Dec00 MJH             Added masking to EC_CLASS etc macros
-+   17Sep02 GSG             Added HAL support (new class&devices)
-+   03Oct02 GSG             Removed C++ style comments
-+***************************************************************************/
-+#ifndef _INC_EC_ERRORS
-+#define _INC_EC_ERRORS
-+
-+/*
-+  31    - CRITICAL
-+  30-28 - CLASS         (ie. DIAG, KERNEL, FLASH, etc)
-+  27-24 - INSTANCE      (ie. 1, 2, 3, etc )
-+  23-16 - DEVICE        (ie. EMAC, IIC, etc)
-+  15-08 - FUNCTION      (ie. RX, TX, INIT, etc)
-+  07-00 - ERROR CODE    (ie. NO_BASE, FILE_NOT_FOUND, etc )
-+*/
-+
-+/*---------------------------------------------------------------------------
-+  Useful defines for accessing fields within error code
-+---------------------------------------------------------------------------*/
-+#define CRITICAL_SHIFT    31
-+#define CLASS_SHIFT       28
-+#define INST_SHIFT        24
-+#define DEVICE_SHIFT      16
-+#define FUNCTION_SHIFT     8
-+#define ERROR_CODE_SHIFT   0
-+
-+#define CRITICAL_MASK     1
-+#define CLASS_MASK        0x07
-+#define DEVICE_MASK       0xFF
-+#define INST_MASK         0x0F
-+#define FUNCTION_MASK     0xFF
-+#define ERROR_CODE_MASK   0xFF
-+
-+#define EC_CLASS(val)     ((val&CLASS_MASK)      << CLASS_SHIFT)
-+#define EC_DEVICE(val)    ((val&DEVICE_MASK)     << DEVICE_SHIFT)
-+#define EC_INST(val)      ((val&INST_MASK)       << INST_SHIFT)
-+#define EC_FUNC(val)      ((val&FUNCTION_MASK)   << FUNCTION_SHIFT)
-+#define EC_ERR(val)       ((val&ERROR_CODE_MASK) << ERROR_CODE_SHIFT)
-+
-+/*---------------------------------------------------------------------------
-+   Operation classes
-+---------------------------------------------------------------------------*/
-+#define EC_HAL              EC_CLASS(0)
-+#define EC_DIAG             EC_CLASS(8)
-+
-+/*---------------------------------------------------------------------------
-+   Device types
-+---------------------------------------------------------------------------*/
-+#define EC_DEV_EMAC         EC_DEVICE(1)
-+#define EC_DEV_IIC          EC_DEVICE(2)
-+#define EC_DEV_RESET        EC_DEVICE(3)
-+#define EC_DEV_ATMSAR       EC_DEVICE(4)
-+#define EC_DEV_MEM          EC_DEVICE(5)
-+#define EC_DEV_DES          EC_DEVICE(6)
-+#define EC_DEV_DMA          EC_DEVICE(7)
-+#define EC_DEV_DSP          EC_DEVICE(8)
-+#define EC_DEV_TMR          EC_DEVICE(9)
-+#define EC_DEV_WDT          EC_DEVICE(10)
-+#define EC_DEV_DCL          EC_DEVICE(11)
-+#define EC_DEV_BBIF         EC_DEVICE(12)
-+#define EC_DEV_PCI              EC_DEVICE(13)
-+#define EC_DEV_XBUS         EC_DEVICE(14)
-+#define EC_DEV_DSLIF            EC_DEVICE(15)
-+#define EC_DEV_USB                      EC_DEVICE(16)
-+#define EC_DEV_CLKC                     EC_DEVICE(17)
-+#define EC_DEV_RAPTOR       EC_DEVICE(18)
-+#define EC_DEV_DSPC                     EC_DEVICE(19)
-+#define EC_DEV_INTC                     EC_DEVICE(20)
-+#define EC_DEV_GPIO                     EC_DEVICE(21)
-+#define EC_DEV_BIST                     EC_DEVICE(22)
-+#define EC_DEV_HDLC                     EC_DEVICE(23)
-+#define EC_DEV_UART                     EC_DEVICE(24)
-+#define EC_DEV_VOIC                     EC_DEVICE(25)
-+/* 9.17.02 (new HAL modules) */
-+#define EC_DEV_CPSAR        EC_DEVICE(0x1A)
-+#define EC_DEV_AAL5         EC_DEVICE(0x1B)
-+#define EC_DEV_AAL2         EC_DEVICE(0x1C)
-+#define EC_DEV_CPMAC        EC_DEVICE(0x1D)
-+#define EC_DEV_VDMA         EC_DEVICE(0x1E)
-+#define EC_DEV_VLYNQ        EC_DEVICE(0x1F)
-+#define EC_DEV_CPPI         EC_DEVICE(0x20)
-+#define EC_DEV_CPMDIO       EC_DEVICE(0x21)
-+
-+/*---------------------------------------------------------------------------
-+   Function types
-+---------------------------------------------------------------------------*/
-+#define EC_FUNC_READ_CONF   EC_FUNC(1)
-+#define EC_FUNC_INIT        EC_FUNC(2)
-+
-+/*---------------------------------------------------------------------------
-+   Error codes
-+---------------------------------------------------------------------------*/
-+#define EC_CRITICAL         (1<<CRITICAL_SHIFT)
-+#define EC_NO_ERRORS        0
-+#define EC_VAL_NO_BASE      EC_ERR(1)
-+#define EC_VAL_NO_RESET_BIT EC_ERR(2)
-+#define EC_VAL_NO_RESET     EC_ERR(3)
-+#define EC_VAL_BAD_BASE     EC_ERR(4)
-+#define EC_VAL_MALLOCFAILED EC_ERR(5)
-+#define EC_VAL_NO_RESETBASE EC_ERR(6)
-+#define EC_DEVICE_NOT_FOUND EC_ERR(7)
-+
-+/*---------------------------------------------------------------------------
-+   Function declarations
-+---------------------------------------------------------------------------*/
-+extern void ec_log_error( unsigned int );
-+
-+#endif /* _INC_EC_ERRORS */
-diff -urN linux.old/drivers/atm/sangam_atm/ec_errors_cpsar.h linux.dev/drivers/atm/sangam_atm/ec_errors_cpsar.h
---- linux.old/drivers/atm/sangam_atm/ec_errors_cpsar.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/ec_errors_cpsar.h	2005-08-23 04:46:50.102842936 +0200
-@@ -0,0 +1,118 @@
-+/***************************************************************************
-+ Copyright(c) 2001, Texas Instruments Incorporated. All Rights Reserved.
-+
-+ FILE:  ec_errors.h
-+
-+ DESCRIPTION:
-+   This file contains definitions and function declarations for
-+   error code support.
-+
-+ HISTORY:
-+   14Dec00 MJH             Added masking to EC_CLASS etc macros
-+   17Sep02 GSG             Added HAL support (new class&devices)
-+   03Oct02 GSG             Removed C++ style comments
-+***************************************************************************/
-+#ifndef _INC_EC_ERRORS
-+#define _INC_EC_ERRORS
-+
-+/*
-+  31    - CRITICAL
-+  30-28 - CLASS         (ie. DIAG, KERNEL, FLASH, etc)
-+  27-24 - INSTANCE      (ie. 1, 2, 3, etc )
-+  23-16 - DEVICE        (ie. EMAC, IIC, etc)
-+  15-08 - FUNCTION      (ie. RX, TX, INIT, etc)
-+  07-00 - ERROR CODE    (ie. NO_BASE, FILE_NOT_FOUND, etc )
-+*/
-+
-+/*---------------------------------------------------------------------------
-+  Useful defines for accessing fields within error code
-+---------------------------------------------------------------------------*/
-+#define CRITICAL_SHIFT    31
-+#define CLASS_SHIFT       28
-+#define INST_SHIFT        24
-+#define DEVICE_SHIFT      16
-+#define FUNCTION_SHIFT     8
-+#define ERROR_CODE_SHIFT   0
-+
-+#define CRITICAL_MASK     1
-+#define CLASS_MASK        0x07
-+#define DEVICE_MASK       0xFF
-+#define INST_MASK         0x0F
-+#define FUNCTION_MASK     0xFF
-+#define ERROR_CODE_MASK   0xFF
-+
-+#define EC_CLASS(val)     ((val&CLASS_MASK)      << CLASS_SHIFT)
-+#define EC_DEVICE(val)    ((val&DEVICE_MASK)     << DEVICE_SHIFT)
-+#define EC_INST(val)      ((val&INST_MASK)       << INST_SHIFT)
-+#define EC_FUNC(val)      ((val&FUNCTION_MASK)   << FUNCTION_SHIFT)
-+#define EC_ERR(val)       ((val&ERROR_CODE_MASK) << ERROR_CODE_SHIFT)
-+
-+/*---------------------------------------------------------------------------
-+   Operation classes
-+---------------------------------------------------------------------------*/
-+#define EC_HAL              EC_CLASS(0)
-+#define EC_DIAG             EC_CLASS(8)
-+
-+/*---------------------------------------------------------------------------
-+   Device types
-+---------------------------------------------------------------------------*/
-+#define EC_DEV_EMAC         EC_DEVICE(1)
-+#define EC_DEV_IIC          EC_DEVICE(2)
-+#define EC_DEV_RESET        EC_DEVICE(3)
-+#define EC_DEV_ATMSAR       EC_DEVICE(4)
-+#define EC_DEV_MEM          EC_DEVICE(5)
-+#define EC_DEV_DES          EC_DEVICE(6)
-+#define EC_DEV_DMA          EC_DEVICE(7)
-+#define EC_DEV_DSP          EC_DEVICE(8)
-+#define EC_DEV_TMR          EC_DEVICE(9)
-+#define EC_DEV_WDT          EC_DEVICE(10)
-+#define EC_DEV_DCL          EC_DEVICE(11)
-+#define EC_DEV_BBIF         EC_DEVICE(12)
-+#define EC_DEV_PCI              EC_DEVICE(13)
-+#define EC_DEV_XBUS         EC_DEVICE(14)
-+#define EC_DEV_DSLIF            EC_DEVICE(15)
-+#define EC_DEV_USB                      EC_DEVICE(16)
-+#define EC_DEV_CLKC                     EC_DEVICE(17)
-+#define EC_DEV_RAPTOR       EC_DEVICE(18)
-+#define EC_DEV_DSPC                     EC_DEVICE(19)
-+#define EC_DEV_INTC                     EC_DEVICE(20)
-+#define EC_DEV_GPIO                     EC_DEVICE(21)
-+#define EC_DEV_BIST                     EC_DEVICE(22)
-+#define EC_DEV_HDLC                     EC_DEVICE(23)
-+#define EC_DEV_UART                     EC_DEVICE(24)
-+#define EC_DEV_VOIC                     EC_DEVICE(25)
-+/* 9.17.02 (new HAL modules) */
-+#define EC_DEV_CPSAR        EC_DEVICE(0x1A)
-+#define EC_DEV_AAL5         EC_DEVICE(0x1B)
-+#define EC_DEV_AAL2         EC_DEVICE(0x1C)
-+#define EC_DEV_CPMAC        EC_DEVICE(0x1D)
-+#define EC_DEV_VDMA         EC_DEVICE(0x1E)
-+#define EC_DEV_VLYNQ        EC_DEVICE(0x1F)
-+#define EC_DEV_CPPI         EC_DEVICE(0x20)
-+#define EC_DEV_CPMDIO       EC_DEVICE(0x21)
-+
-+/*---------------------------------------------------------------------------
-+   Function types
-+---------------------------------------------------------------------------*/
-+#define EC_FUNC_READ_CONF   EC_FUNC(1)
-+#define EC_FUNC_INIT        EC_FUNC(2)
-+
-+/*---------------------------------------------------------------------------
-+   Error codes
-+---------------------------------------------------------------------------*/
-+#define EC_CRITICAL         (1<<CRITICAL_SHIFT)
-+#define EC_NO_ERRORS        0
-+#define EC_VAL_NO_BASE      EC_ERR(1)
-+#define EC_VAL_NO_RESET_BIT EC_ERR(2)
-+#define EC_VAL_NO_RESET     EC_ERR(3)
-+#define EC_VAL_BAD_BASE     EC_ERR(4)
-+#define EC_VAL_MALLOCFAILED EC_ERR(5)
-+#define EC_VAL_NO_RESETBASE EC_ERR(6)
-+#define EC_DEVICE_NOT_FOUND EC_ERR(7)
-+
-+/*---------------------------------------------------------------------------
-+   Function declarations
-+---------------------------------------------------------------------------*/
-+extern void ec_log_error( unsigned int );
-+
-+#endif /* _INC_EC_ERRORS */
-diff -urN linux.old/drivers/atm/sangam_atm/env_def_defines.h linux.dev/drivers/atm/sangam_atm/env_def_defines.h
---- linux.old/drivers/atm/sangam_atm/env_def_defines.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/env_def_defines.h	2005-08-23 04:46:50.103842784 +0200
-@@ -0,0 +1,926 @@
-+#ifndef __ENV_DEF_DEFINES_H__
-+#define __ENV_DEF_DEFINES_H__ 1
-+
-+//********************************************************************
-+//*    DMT-BASE ADSL MODEM PROGRAM
-+//*    TEXAS INSTRUMENTS PROPRIETARTY INFORMATION
-+//*    AMATI CONFIDENTIAL PROPRIETARY
-+//*
-+//* (c) Copyright May 1999, Texas Instruments Incorporated.
-+//*     All Rights Reserved.
-+//*
-+//*   Property of Texas Instruments Incorporated and Amati Communications Corp.
-+//*
-+//* Restricted Rights - Use, duplication, or disclosure is subject to
-+//* restrictions set forth in TI's and Amati program license agreement and
-+//* associated documentation
-+//*
-+//*********************************************************************
-+//*
-+//* FILENAME: dpsys_defines.h
-+//*
-+//* ABSTRACT: This file provides a mechanism for defining standard
-+//*           preprocessor flag sets for datapump.
-+//*
-+//* TARGET:  Non specific.
-+//*
-+//* TOOLSET:  Non specific.
-+//*
-+//* ACTIVATION:
-+//*
-+//* HISTORY:  DATE        AUTHOR         DESCRIPTION
-+//*           05/11/99    FLW            Created
-+//*           01/21/00    FLW            derfmake changes
-+//*           02/07/00    FLW/M.Seidl    added _debug targets
-+//*           02/23/00    FLW/M.Barnett  merged in from G.lite branch
-+//*           03/03/00    FLW/M.Barnett  added TRELLIS token
-+//*           05/11/00    Barnett        Added ap036btp & ap037btp support.
-+//*           02/07/00    M.Seidl        added HW_TEQ, HW_DEC and DC_BIAS tokens
-+//*           02/28/00    Derf/Seidl     Mod's in support of suppressing compiler warnings for empty source files
-+//*           02/28/00    M. Seidl       added SWTC token
-+//*           02/28/00    M. Seidl       added ap0501tp and its _debug target
-+//*           03/03/00    M. Seidl       added MODPILOT token, ap0307tp_debug has SWDI and FDD enabled
-+//*           03/08/00    Jack Huang     Added HWRSDEC token
-+//*           03/29/00    Derf/Seidl     Mod's in support Soft-TC and derfmake
-+//*           04/10/00    Jack Huang     Added PCIMASTER token
-+//*           04/11/00    Jack Huang     Added STBFIX token
-+//*           04/24/00    M. Seidl       ap0500tp has OLAYDP turned on, ap0500tp_debug has OLAYDP turned off now
-+//*           04/28/00    M.Seidl        added KAPIL token for ap0501tp targets
-+//*           06/02/00    P.Sexton       Added OAM_EOC token
-+//*           06/06/00    M. Seidl       added au0501tp target
-+//*           06/12/00    Michael Seidl  activated h/w TEQ for KAPIL targets, disabled STBFIX for all targets
-+//*           06/14/00    Derf           added ap0308tp, alphabetized token lists
-+//*           06/16/00    Jack Huang     added au0501tp_debug target
-+//*           06/22/00    M. Seidl       Enabled code overlays through EMIF from external memory. Now there are 3
-+//*                                      different code overlay schemes that are differentiated by the following tokens:
-+//*                                      OLAYDP_PCI:  uses PCI DMA in PCI Master Mode
-+//*                                      OLAYDP_HOST: Host downloads overlay code into DMEM upon request from DSP
-+//*                                      OLAYDP_EMIF: Host downloads overlay code into ext. mem at boot-time. DSP uses
-+//*                                                 DMA channel 0 to load code into on-chip PMEM
-+//*                                      OLAYDP:    turns overlays generally on or off
-+//*           07/15/00    B.Srinivasan   Cleaned up default tokens and tokens for au0501tp, au0501tp_debug,
-+//*                                      ap0501tp and ap0501tp_debug targets as well
-+//*           07/19/00    B.Srinivasan   Made changes w.r.t cleaning/fixing Rufus Interrupt related code
-+//*                                      (changed token TC_INTRPT_RUFUS to INTRPT_RUFUS
-+//*           06/14/00    Derf           added au0501cp
-+//*           08/12/00    Yinong Ding    Added DPLL_MODE token.
-+//*           08/16/00    F. Mujica      Moved DOUBLE_XMT_RATE, RX_HPF, and LEAKY_LMS tokens here.
-+//*           09/05/00    M. Seidl       Changed ap0501tp back to do overlay through PCI (OLAY_PCI = 1)
-+//*           09/11/00    M. Seidl       moved USB and OLAYDP_HOST definitions to be CHIPSET specific, not target specific
-+//*           09/21/00    U.Dasgupta/    Added a token for separate transmit and receive buffers.
-+//*                       F.Mujica       (SEPARATE_TX_RX_BUFFERS).
-+//*           10/02/00    U.Dasgupta/    Added DPLL and SEPARATE_TX_RX_BUFFER tokens for au0502 target.
-+//*                       F.Mujica
-+//*           10/02/00    M. Castellano  Added new tokens for new Host/EMIF DSP code overlay.
-+//*                                      OLAYDP_2STEP: Host downloads overlay code into ext. mem upon DSP request.  DSP
-+//*                                      DMA channel 0 to load code into on-chip PMEM.  It is a somewhat hybrid version
-+//*                                      of OLAYDP_HOST and OLAYDP_EMIF.  The test target is ap0502tp.
-+//*           10/25/00    Balaji         Added tokens for arv500tp target
-+//*           10/31/00    U. Iyer        Added TEQ_AVG token and set it one for Ax5
-+//*           11/02/00    Barnett        Added OAM_EOC=0 in defaults at bottom of file.
-+//*           11/21/00    M. Seidl       turned OLAYDP and AOC off for ap0307tp to make binary compatible w. whql'ed driver
-+//*           11/28/00    Paul Hunt      added FASTRETRAIN token for fast retrain specific code
-+//*           11/28/00    Paul Hunt      added PILOTDATA token to control channel estimation and transmission
-+//*                                      of data on the upstream pilot tone for ITU standard code loads
-+//*           12/20/00    Jack Huang     added EIGHTBITSRAM toekn for the targets that use 8-bit SRAM for
-+//*                                      interleaver/deinterleaver
-+//*           01/11/01    U.Dasgupta     Added mp targets and cleaned up GHS/PILOTDATA variables
-+//*           01/23/01    U.Dasgupta     Cleaned up code within GLITE tokens
-+//*           01/23/00    Barnett        Added in full EOC support for AP3/Ax5.  Got rid of UTC.  No longer needed.
-+//*           02/08/01    Barnett        Added DDC token.
-+//*           03/09/01    Nirmal Warke   Added in TOKEN definition for line diagnostics (LINE_DIAG): IMP DEPENDENCIES -
-+//*                                      TEQ_AVG must be off when LINE_DIAG is on (since they share a union buffer at the same time)
-+//*           03/13/01    M. Seidl       Recovered ap0500tp target. Added GHS token as PMEM saving option
-+//*           03/14/01    Barnett        Added ap0500mb target support.  Look-and-feel is similar to ap0500tp.
-+//*                                      Added seperate-but-equal def's wrt. ISDN Annex B, Annex C, and PROP.
-+//*           03/14/01    J. Bergsagel   Added EXTERNBERT token.
-+//*           03/15/01    Barnett/Balaji Merged AR5(H) -> 03.00.00 datapump.
-+//*           03/16/01    Nirmal Warke   Added in TOKEN definition for crosstalk performance mods (CROSSTALK): IMP DEPENDENCIES -
-+//*                                      TEQ_AVG must be off and LEAKY_LMS must be on when CROSSTALK is on
-+//*           03/21/01    Barnett        Added support for ar0500lp, ar0500mp, ar0500dp, arv500lp, arv500mp, and arv500dp.
-+//*           03/26/01    M. Seidl       enabled 64pt IFFT for ap0500mb (Raptor+AD11, FDM)
-+//*           03/28/01    J. Bergsagel   Removed EXTERNBERT token (now use host intf. var. instead)
-+//*           04/03/01    J. Bergsagel   Removed condition of DSPDP_CHIPSET_GEN==5 for default defines
-+//*                                      Removed LEAKY_LMS token (assumed always 1)
-+//*                                      Removed OLAYDP_HOST token (assumed always 0)
-+//*                                      Removed RX_HPF token (assumed always 1)
-+//*                                      Removed TRIBRID token (not used any more)
-+//*                                      Removed FDD token (assumed always 1)
-+//*                                      Removed HW_DEC token (assumed always 1)
-+//*                                      Removed HW_TEQ token (assumed always 1)
-+//*                                      Removed HWRSDEC token (assumed always 1)
-+//*                                      Removed ILEC_AD11_ALCATEL337 token (assumed always 0)
-+//*                                      Removed ILEC_AD11_HDSLNOISEFIX token (assumed always 0)
-+//*                                      Removed ILEC_AD11_MODULATEPILOT token (assumed always 0)
-+//*                                      Removed ILEC_AD11_NEWINTERPOLATE token (assumed always 0)
-+//*                                      Removed ILEC_AD11_USTXHPF token (assumed always 0)
-+//*                                      Removed SWDI token (assumed always 1)
-+//*                                      Removed TD_AGC token (assumed always 1)
-+//*                                      Removed DSPDP_LEGACY_TARGET token (assumed always 0)
-+//*                                      Removed AD11_20, AD11_20NL and AD11_20_NEWPREC token (always 1)
-+//*                                      Removed AI token (assumed always 1)
-+//*                                      Removed ATUC token (assumed always 0)
-+//*                                      Removed EU token (assumed always 0)
-+//*                                      Removed EVM2 token (assumed always 0)
-+//*                                      Removed INTRPT_RUFUS token (assumed always 0)
-+//*                                      Removed MODPILOT token (assumed always 0)
-+//*                                      Removed SL and SL_EVM tokens (assumed always 0)
-+//*                                      Removed STBIFX token (assumed always 0)
-+//*                                      Removed STD token (assumed always 1)
-+//*                                      Removed SWDI_LOOPBACK token (assumed always 0)
-+//*                                      Removed TID token (assumed always 0)
-+//*                                      Removed TII token (assumed always 1)
-+//*                                      Removed TIPCI token (assumed always 1)
-+//*                                      Removed UDI token (assumed always 1)
-+//*                                      Removed DC_BIAS token (assumed always 1)
-+//*           04/05/01    Barnett        Added DSPDP_ prefix to tokens that originate
-+//*                                      in the public interface.
-+//*           05/07/01    Jack Huang     Removed DOUBLE_XMT_RATE token.
-+//*           05/16/01    Barnett        Added back in EXTERNBERT token in support
-+//*                                      of saving PMEM.
-+//*           06/05/01    Jack Huang     Fixed the rules for ar0500mp_debug target
-+//*           04/23/01    M. Halleck     Merge Astro Wu's DDC enhancements
-+//*           06/05/01    M. Capps       Changed DSP_DEBUG to ENHANCED_SERIAL_DEBUG
-+//*           07/03/01    M. Capps       Replaced ESD token with !DDC, added DEV_DEBUG
-+//*           06/26/01    J. Bergsagel   Removed all the old ap03... stuff
-+//*                                      Removed OLAYDP_HOST token (again)
-+//*                                      Removed CROSSTALK token (assumed always 1)
-+//*                                      Removed TEQ_AVG token (assumed always 0)
-+//*                                      Removed DE token (assumed always 1)
-+//*                                      Removed PVAT token and au0501cp target
-+//*                                      Removed FASTRETRAIN token (assumed always 0)
-+//*           07/05/01    J. Bergsagel   Changed PCIMASTER token to TC_ATM_PCIMASTER
-+//*           07/20/01    Umesh Iyer     Added ATMBERT token. ATMBERT is conditional on SWTC definition. if SWTC is 0
-+//*                                      ATMBERT should be 0. Else it can be 0/1. Default 0.
-+//*           07/23/01    J. Bergsagel   Changed name from defines_u.h to dpsys_defines.h
-+//*           07/24/01    Barnett        Added support for build of $(TARGET)_diag mfgr'ing targets.
-+//*           08/02/01    Michael Seidl  renamed KAPIL token to !AD1X
-+//*           08/02/01    Michael Seidl  renamed GHS token to PMEMSAVE_GHS
-+//*           08/03/01    S.Yim          Added MFGR_DIAG token for afe diagnostic
-+//*                                      Added AFEDEV token for afe device driver
-+//*                                      Added DSPBIOSII token for dsp bios
-+//*           09/21/01    Sameer         Enable EXTERNBERT.  Disable ATMBERT.
-+//*           10/01/01    U.Dasgupta     Turned off SMART_MARGIN for ap0500mb because of FECs/CRCs;
-+//*           10/09/01    Barnett        Added support for ar0500db.
-+//*           10/12/01    Barnett        Disable EXTERNBERT.
-+//*           10/15/01    Barnett        Turn off SMART_MARGIN.
-+//*           11/07/01    Barnett        Def'ed ISDN_DEBUG for all targets to avoid compiler warnings.
-+//*                                      Assumed defaul value is zero.
-+//*           11/13/01    Barnett        Reworked ar0500db_debug to build JTAG-bootable load.
-+//*                                      The equivalent production target should only be flash-bootable.
-+//*           01/11/02    Yim            Added TOKEN JTAG to build JTAG load ar0500db_diag.
-+//*           01/23/02    U Iyer         Added DEBUG_LOG token. Default value 0
-+//*           01/31/02    Barnett        Added support for ar0700mp target.
-+//*           02/04/02    S.Yim          Added TOKEN JTAG to build JTAG load ar0500mp_diag
-+//*           02/11/02    U Iyer         Added MARGIN_DELTA_RETRAIN token. Default value 1
-+//*           05/15/02    Sameer V       Enabled EXTERNBERT token for AR5 and AU5 platforms. EXTERNBERT is
-+//*                                      not supported on AR5H.
-+//*           02/14/02    Barnett        Don't ref the SWTC feature token if mfgr'ing diag target.
-+//*           02/19/02    Yim            Added support to build au0502db_diag target.
-+//*           03/08/02    Nirmal Warke   Added feature token HYBRID_SWITCH
-+//*           03/15/02    U G Jani       Turned ON Bitswap support for AU5I (au0502db) targets.
-+//*           04/08/02    U G Jani       Enabled NLNOISEADJSNR token for AU5I targets.
-+//*           06/24/02    Seungmok Oh    Added PERTONE_EQ token support for those targets:
-+//*                                      (ar0500mp_debug, au0502mp_debug, ar0500mp, au0502mp)
-+//*           06/26/02    Mallesh        Added DS_PWR_CUTBACK token. Default value 1.
-+//*           06/27/02    Mallesh        Changed default value of DS_PWR_CUTBACK token to 0.
-+//*           06/29/02    U.Dasgupta     Token cleanup: Removed ISDN_DEBUG token
-+//*           04/29/02    Mannering      Remove EIGHTBITSRAM, Combined DOUBLEBUFFER with
-+//*                                      BITSWAP, added FPGA token
-+//*           05/03/02    Mannering      cleanup token changed by the new routine names
-+//*           05/06/02    Mannering      Add tokens OUTBAND and INBAND for codec commands
-+//*                                      If both OUTBAND and INBAND are 0 codec register are
-+//*                                      memory mapped.
-+//*           05/29/2002  S.Yim          Removed AD1X, AFEDEV
-+//*           08/31/2002  Paul Hunt      Added PERTONE_EQ and HYBRID_SWITCH for ar0700mp
-+//*           09/12/2002  Paul Hunt      Added support for ar0700db target.
-+//*           08/07/2002  U.Dasgupta     Turned off MARGIN_DELTA_RETRAIN feature for ISDN platforms
-+//*           11/14/2002  Paul Hunt      Merged AX5 MR6 PC modifications into AR7 codebase, specifically
-+//*                                      turned off MARGIN_DELTA_RETRAIN feature for ar0700db target
-+//*           08/26/2002  N. Warke       Added DUAL_TEQ token. Active only for Ax7 target
-+//*           09/26/2002  Mannering      Add token CODEC_EMU for codec emulator board
-+//*           10/15/2002  Iyer/Molla     Added DMT_BIS token for DELT support
-+//*           10/21/2002  A. Redfern     Added PHY_EC_ENABLE and PHY_PATH_ENABLE tokens
-+//*           10/23/2002  A. Redfern     Removed LINE_DIAG token
-+//*           10/28/2002  J. Bergsagel   Cleaned up old targets and cleaned up the token list
-+//*           10/30/2002  A. Redfern     Added PHY_TDW_ENABLE
-+//*           11/01/2002  A. Redfern     Removed SMART_MARGIN token
-+//*           11/01/2002  Mustafa        Turned on SPECTRAL_SHAPING features for Lucent AnyMedia O.69 Interop.
-+//*           11/15/2002  Yim/Mannering  Added CODEC_EMU token for analog emulation board specifics
-+//*           11/15/2002  Iyer/Molla     Added DEBUG_DELT and MEM_STR token to support DELT debug
-+//*           12/27/2002  Sameer V       Added ATM_TC_HW token for Sangam.
-+//*           01/06/2003  J. Bergsagel   Added default values for NLNOISEADJSNR, ARTT and DS_PWR_CUTBACK
-+//*           01/07/2003  S.Yim          Modified ar0700db_diag target to turn on ISDN token
-+//*           01/22/2003  J. Bergsagel   Added back in defines for the debug targets.
-+//*           01/21/2003  MCB            Implemented Ax7 UNIT-MODULE modular software framework.
-+//*           01/31/2003  J. Bergsagel   Made debug targets to be for the FPGA platform; non-debug for Sangam.
-+//*                                      Turned off DUAL_TEQ, PHY_EC_ENABLE and PHY_PATH_ENABLE by default
-+//*                                      for the Sangam (non-debug) targets.
-+//*                                      Turned off OLAYDP token by default.
-+//*                                      Turned off SWTC and turned on ATM_TC_HW by default for Sangam targets.
-+//*           01/29/2003  Sameer V       Added ATMBERT_HW token for Sangam.
-+//*           02/04/2003  D. Mannering   Added CO_PROFILE token
-+//*           02/19/2003  Sameer V       Added back EXTERNBERT token for ar0700mp_dp and ar0700db_dp targets.
-+//*                                      Disabled EXTERNBERT for debug target since it is not supported on the
-+//*                                      FPGA platform.
-+//*           02/21/2003  A. Redfern     Turned off OAM_EOC, AOC and BITSWAP (until memory issues are resolved).
-+//*                                      Turned on DUAL_TEQ, PHY_PATH_ENABLE and PHY_EC_ENABLE.
-+//*           02/21/2003  D. Mannering   Added DEBUG_DUMP.
-+//*           03/06/2003  J. Bergsagel   Cleaned up tokens for each target and switched diag targets
-+//*                                      over to the Sangam platform (instead of the FPGA platform).
-+//*           03/07/2003  J. Bergsagel   Cleaned up TC and BERT tokens
-+//*           03/11/2003  J. Bergsagel   Turned on AOC and BITSWAP for Sangam POTS and ISDN targets.
-+//*           03/20/2003  Mallesh        Added SHALF token.
-+//*           03/24/2003  F. Mujica      Enable hybrid selection
-+//*           03/26/2003  A. Redfern     Removed PMEMSAVE_GHS (always = 1).
-+//*           04/08/2003  F. Mujica      Renamed HYBRID_SWITCH token to PHY_HYB_ENABLE
-+//*           04/08/2003  J. Bergsagel   Turned off PHY_HYB_ENABLE for _debug targets (FPGA board builds)
-+//*           04/09/2003  J. Bergsagel   Turned on OLAYDP only for ar0700mp and ar0700db.
-+//*                                      Turned on AOC, BITSWAP, and OAM_EOC for ar0700mp and ar0700db.
-+//*           04/09/2003  J. Bergsagel   Corrected name "PHY_HYB_SELECT" to "PHY_HYB_ENABLE"
-+//*           04/15/2003  A. Redfern     Turned on ECI_PULSECOM_INTEROP because phase optimization was enabled.
-+//*           05/05/2003  D. Mannering   Review Comments - turn on AOC, EXTERNBERT, SHALF, for ar0700mp; amd
-+//*                                      turn on AOC for ar0700db
-+//*           05/11/2003  Prashant S     Added DMT_BIS token for AR7 Soft DI work
-+//*           05/13/2003  J. Bergsagel   Turned on IMPROVED_STAT_SUPPORT_06_03_00 by default for necessary statistics
-+//*           05/15/2003  J. Bergsagel   Turned off CO_PROFILE for diag targets.
-+//*           05/27/2003  U.Dasgupta     Added NLNOISEADJSNR_EC token for ISDN - to take care of non-linear noise
-+//*                                      (from ISDN splitter) compensation.
-+//*           06/02/2003  Z. Yang        Added PHY_NDIAG_ENABLE token.
-+//*           06/02/2003  Z. Yang        Added COMB_LINEDIAG_ENABLE token.
-+//*           06/05/2003  P. Hunt        Turned on ATUC_CLEARDOWN_CHANGE token for all targets.
-+//*           06/05/2003  Mallesh        Turned on CENTILLIUM_VENDORID_AND_TXRATE_CHNG to enable logging the vendor ID
-+//*                                      for centillium and litespan
-+//*           06/05/2003  U.Dasgupta     Turned on SHALF token for ISDN.
-+//*           06/06/2003  U.Dasgupta     Turned on G.hs nonstandard field token for ar0700db target.
-+//*           06/12/2003  J. Bergsagel   Changed *_debug targets to be for JTAG=1 instead of FPGA targets
-+//*                                      IMPORTANT: For non-JTAG cases, "JTAG" should be undefined.
-+//*                                      Therefore, "JTAG" should not have a default case at the bottom (JTAG 0)
-+//*           06/18/2003  A. Redfern     Turned on spectral shaping token for all targets.
-+//*           06/23/2003  J. Bergsagel   Turned off GHS_NON_STD_FIELD token for ar0700db until bugs are fixed.
-+//*           06/23/2003  U G Jani       Undid the above change since the bug is fixed.
-+//*           06/27/2003  Mallesh        Removed all the interop tokens which are no longer required.
-+//*           08/20/2003  J. Bergsagel   Added default value for OVHD_PMDTEST_PARA and put default section
-+//*                                      tokens in alphabetical order.
-+//*           10/09/2003  Hanyu Liu      Defined token ADSL2_1BIT_TONE to support Rx one bit constellation.
-+//*           10/12/2003  Hanyu Liu      Defined token ADSL2_BSWP for bitswap.
-+//*           10/20/2003  Xiaohui Li     Added READSL2_ENABLE token.
-+//*           12/01/2003  Seungmok Oh    Added TXDF2B_PROFILING token, which is active only for POTS target.
-+//*           12/09/2003  Jack Huang     Turned on GHS_NON_STD_FIELD support for AR7 POTS targets
-+//*           12/16/2003  Mustafa T.     Added the necessary definitions for diag target.  
-+//*****************************************************************************************************
-+//*
-+//* The default flag settings are:
-+//*
-+//*   -dATUC=1 -dSTD=0 -dISDN=0 -dTIPCI=0 -dTID=0 -dTII=0 -dAI=0
-+//*   -dEVM2=0 -dEU=0 -dSL=0 -dSL_EVM=1 -dGLITE=0
-+//*
-+//* and are set after all the per-suffix options have had a chance to
-+//* set them.  Each flag is only set if it has not previously been set, so
-+//* per-suffix settings  can override defaults, and command-line defines can
-+//* override per-suffix settings.
-+//*
-+//*****************************************************************************
-+
-+
-+//* ===========================================================================
-+//*   Suffix codes
-+//*     The command-line can include -dOBJSFX_xxx to get a flag set
-+//*     instead of explicitly setting each flag on each CC/ASM command-line.
-+//*     and the object suffix will control the settings of "feature" constants.
-+//* ===========================================================================
-+//
-+//* ===========================================================================
-+//   Flag settings for new suffixes (in alphabetical order of suffix)
-+//     Each suffix has to specify only those flags which differ from the
-+//     default settings.
-+//* ===========================================================================
-+//  NOTE: Try to keep feature flags in alphabetical order to ease maintenance.
-+//* ===========================================================================
-+//*
-+
-+#define CHIPSET_ID_UNKN '?'
-+#define CHIPSET_ID_AH   'H'
-+#define CHIPSET_ID_AP   'P'
-+#define CHIPSET_ID_AR   'R'
-+#define CHIPSET_ID_ARV  'R'
-+#define CHIPSET_ID_AT   'T'
-+#define CHIPSET_ID_AU   'U'
-+
-+#define CHIPSET_ID2_GENERIC '0'
-+#define CHIPSET_ID2_ARV  'R'
-+
-+  #define DSPDP_IMAGE_ID_STANDARD(code) ( \
-+      STANDARD_is_MULTIMODE(code) ? "M" : \
-+      STANDARD_is_GDMT(code)      ? "D" : \
-+      STANDARD_is_GLITE(code)     ? "L" : \
-+      STANDARD_is_T1413(code)     ? "T" : "_")
-+
-+  #define DSPDP_IMAGE_ID_SERVICE(code)  ( \
-+      SERVICE_is_POTS(code)        ? "P" : \
-+      SERVICE_is_ISDN_ANNEXB(code) ? "B" : \
-+      SERVICE_is_ISDN_ANNEXC(code) ? "C" : \
-+      SERVICE_is_ISDN_PROP(code)   ? "I" : "")
-+
-+// Bit-codes for feature byte in new version.
-+//
-+// 0000 0000
-+// |||| ||||
-+// |||| |||+ -- POTS
-+// |||| ||+---- ISDN_ANNEXB
-+// |||| |+----- ISDN_ANNEXC
-+// |||| +------ ISDN_PROP
-+// |||+--------
-+// ||+--------- GHS
-+// |+---------- GLITE
-+// +----------- T1413
-+//
-+//
-+#define FEATURE_BIT_T1413       0x80
-+#define FEATURE_BIT_GLITE       0x40
-+#define FEATURE_BIT_GHS         0x20
-+#define FEATURE_BIT_ISDN_PROP   0x08
-+#define FEATURE_BIT_ISDN_ANNEXC 0x04
-+#define FEATURE_BIT_ISDN_ANNEXB 0x02
-+#define FEATURE_BIT_POTS        0x01
-+
-+#define STANDARD_BITS_MASK      (FEATURE_BIT_T1413 | FEATURE_BIT_GLITE | FEATURE_BIT_GHS)
-+#define STANDARD_BITS_T1413      FEATURE_BIT_T1413
-+#define STANDARD_BITS_GHS        FEATURE_BIT_GHS
-+#define STANDARD_BITS_GLITE     (FEATURE_BIT_GLITE | FEATURE_BIT_GHS)
-+#define STANDARD_BITS_GDMT      (STANDARD_BITS_T1413 | STANDARD_BITS_GHS)
-+#define STANDARD_BITS_MULTIMODE (STANDARD_BITS_T1413 | STANDARD_BITS_GLITE | STANDARD_BITS_GDMT)
-+
-+#define SERVICE_BIT_ISDN_ANNEXB  FEATURE_BIT_ISDN_ANNEXB
-+#define SERVICE_BIT_ISDN_ANNEXC  FEATURE_BIT_ISDN_ANNEXC
-+#define SERVICE_BIT_ISDN_PROP    FEATURE_BIT_ISDN_PROP
-+#define SERVICE_BIT_POTS         FEATURE_BIT_POTS
-+
-+//
-+//  Debug new-style suffixes
-+//
-+//
-+
-+#if defined(OBJSFX_ar0700db_debugobj)
-+#ifndef OBJSFX_ar0700dbobj
-+#define OBJSFX_ar0700dbobj 1
-+#endif
-+// Here, in alphabetic order, are the feature tokens that
-+// distinguish this suffix from its non-_debug partner:
-+// (All other tokens from the non-_debug partner that are non-conflicting will also be picked up)
-+
-+#ifndef JTAG
-+#define JTAG 1
-+#endif
-+
-+#elif defined(OBJSFX_ar0700mp_debugobj)
-+#ifndef OBJSFX_ar0700mpobj
-+#define OBJSFX_ar0700mpobj 1
-+#endif
-+// Here, in alphabetic order, are the feature tokens that
-+// distinguish this suffix from its non-_debug partner:
-+// (All other tokens from the non-_debug partner that are non-conflicting will also be picked up)
-+
-+#ifndef ADSL2_BSWP
-+#define ADSL2_BSWP 1 
-+#endif
-+#ifndef AOC 
-+#define AOC 1 
-+#endif
-+#ifndef BITSWAP
-+#define BITSWAP 1 
-+#endif
-+#ifndef DEBUG_ADSL2
-+#define DEBUG_ADSL2  0
-+#endif
-+#ifndef DEBUG_LOG 
-+#define DEBUG_LOG 0 
-+#endif
-+#ifndef GHS_NON_STD_FIELD
-+#define GHS_NON_STD_FIELD 1
-+#endif
-+#ifndef JTAG
-+#define JTAG 1
-+#endif
-+#endif  // end of the series of "#elif defined" for debug targets
-+
-+
-+//
-+//  Standard new-style suffixes for operational and mfgr'ing diag.
-+//
-+
-+#if defined(OBJSFX_ar0700dbobj)
-+#define CHIPSET_AR07    1
-+#define PLATFORM_AR0700 1
-+#define DSPDP_CHIPSET_ID      CHIPSET_ID_AR
-+#define DSPDP_CHIPSET_ID2     CHIPSET_ID2_GENERIC
-+#define DSPDP_CHIPSET_GEN     7
-+#define DSPDP_HARDWARE_REV1   '0'
-+#define DSPDP_HARDWARE_REV2   '0'
-+#define DSPDP_FEATURE_CODE   (STANDARD_BITS_GDMT|SERVICE_BIT_ISDN_ANNEXB)
-+#ifndef AOC
-+#define AOC 1
-+#endif
-+// ATM_TC_HW and SWTC are mutually exclusive
-+#ifndef ATM_TC_HW
-+#define ATM_TC_HW 1
-+#endif
-+#ifndef SWTC
-+#define SWTC 0
-+#endif
-+#ifndef BITSWAP
-+#define BITSWAP 1
-+#endif
-+#ifndef EXTERNBERT
-+#define EXTERNBERT 0
-+#endif
-+#ifndef GHS_NON_STD_FIELD
-+#define GHS_NON_STD_FIELD 1
-+#endif
-+#ifndef MARGIN_DELTA_RETRAIN
-+#define MARGIN_DELTA_RETRAIN 0
-+#endif
-+#ifndef NLNOISEADJSNR_EC
-+#define NLNOISEADJSNR_EC 1
-+#endif
-+#ifndef OLAYDP
-+#define OLAYDP 1
-+#endif
-+#ifndef SHALF
-+#define SHALF 1
-+#endif
-+
-+
-+#elif defined(OBJSFX_ar0700db_diagobj)
-+#define CHIPSET_AR07    1
-+#define PLATFORM_AR0700 1
-+#define DSPDP_CHIPSET_ID      CHIPSET_ID_AR
-+#define DSPDP_CHIPSET_ID2     CHIPSET_ID2_GENERIC
-+#define DSPDP_CHIPSET_GEN     7
-+#define DSPDP_HARDWARE_REV1   '0'
-+#define DSPDP_HARDWARE_REV2   '0'
-+#define DSPDP_FEATURE_CODE   (STANDARD_BITS_GDMT|SERVICE_BIT_ISDN_ANNEXB)
-+#ifndef AOC
-+#define AOC 0
-+#endif
-+// ATM_TC_HW and SWTC are mutually exclusive (or both must be off)
-+#ifndef ATM_TC_HW
-+#define ATM_TC_HW 0
-+#endif
-+#ifndef SWTC
-+#define SWTC 0
-+#endif
-+#ifndef BITSWAP
-+#define BITSWAP 0
-+#endif
-+#ifndef CO_PROFILE
-+#define CO_PROFILE 0
-+#endif
-+#ifndef MARGIN_DELTA_RETRAIN
-+#define MARGIN_DELTA_RETRAIN 0
-+#endif
-+#ifndef MFGR_DIAG
-+#define MFGR_DIAG 1
-+#endif
-+#ifndef OAM_EOC
-+#define OAM_EOC 0
-+#endif
-+#ifndef OLAYDP
-+#define OLAYDP 0
-+#endif
-+#ifndef SNR_UPDATE
-+#define SNR_UPDATE 0
-+#endif
-+
-+#elif defined(OBJSFX_ar0700mpobj)
-+#define CHIPSET_AR07    1
-+#define PLATFORM_AR0700 1
-+#define DSPDP_CHIPSET_ID      CHIPSET_ID_AR
-+#define DSPDP_CHIPSET_ID2     CHIPSET_ID2_GENERIC
-+#define DSPDP_CHIPSET_GEN     7
-+#define DSPDP_HARDWARE_REV1   '0'
-+#define DSPDP_HARDWARE_REV2   '0'
-+#define DSPDP_FEATURE_CODE   (STANDARD_BITS_MULTIMODE|SERVICE_BIT_POTS)
-+#ifndef AOC
-+#define AOC 1
-+#endif
-+// ATM_TC_HW and SWTC are mutually exclusive
-+#ifndef ADSL2_1BIT_TONE
-+#define ADSL2_1BIT_TONE 0
-+#endif
-+#ifndef ADSL2_BSWP
-+#define ADSL2_BSWP 1 
-+#endif
-+#ifndef ATM_TC_HW
-+#define ATM_TC_HW 1
-+#endif
-+#ifndef SWTC
-+#define SWTC 0
-+#endif
-+#ifndef BITSWAP
-+#define BITSWAP 1
-+#endif
-+#ifndef EXTERNBERT
-+#define EXTERNBERT 0
-+#endif
-+#ifndef OLAYDP
-+#define OLAYDP 1
-+#endif
-+#ifndef DMT_BIS
-+#define DMT_BIS 1 
-+#endif
-+#ifndef SHALF
-+#define SHALF 1 
-+#endif
-+#ifndef MEM_STR
-+#define MEM_STR 0
-+#endif
-+#ifndef DS_LOOP_BACK
-+#define DS_LOOP_BACK 0
-+#endif
-+#ifndef LOOP_BACK_DEBUG
-+#define LOOP_BACK_DEBUG 0
-+#endif
-+#ifndef US_LOOP_BACK
-+#define US_LOOP_BACK 0
-+#endif
-+#ifndef OVHD_PMDTEST_PARA
-+#define OVHD_PMDTEST_PARA 0
-+#endif
-+#ifndef DS_RX_CODEWORD
-+#define DS_RX_CODEWORD 1 
-+#endif
-+#ifndef READSL2_ENABLE
-+#define READSL2_ENABLE 1
-+#endif
-+#ifndef GHS_NON_STD_FIELD
-+#define GHS_NON_STD_FIELD 1
-+#endif
-+
-+#elif defined(OBJSFX_ar0700mp_diagobj)
-+#define CHIPSET_AR07    1
-+#define PLATFORM_AR0700 1
-+#define DSPDP_CHIPSET_ID      CHIPSET_ID_AR
-+#define DSPDP_CHIPSET_ID2     CHIPSET_ID2_GENERIC
-+#define DSPDP_CHIPSET_GEN     7
-+#define DSPDP_HARDWARE_REV1   '0'
-+#define DSPDP_HARDWARE_REV2   '0'
-+#define DSPDP_FEATURE_CODE   (STANDARD_BITS_MULTIMODE|SERVICE_BIT_POTS)
-+#ifndef ADSL2_BSWP
-+#define ADSL2_BSWP 0
-+#endif
-+#ifndef AOC
-+#define AOC 0
-+#endif
-+// ATM_TC_HW and SWTC are mutually exclusive (or both must be off)
-+#ifndef ATM_TC_HW
-+#define ATM_TC_HW 0
-+#endif
-+#ifndef SWTC
-+#define SWTC 0
-+#endif
-+#ifndef BITSWAP
-+#define BITSWAP 0
-+#endif
-+#ifndef CO_PROFILE
-+#define CO_PROFILE 0
-+#endif
-+#ifndef DMT_BIS
-+#define DMT_BIS 0
-+#endif
-+#ifndef MARGIN_DELTA_RETRAIN
-+#define MARGIN_DELTA_RETRAIN 0
-+#endif
-+#ifndef MFGR_DIAG
-+#define MFGR_DIAG 1
-+#endif
-+#ifndef OAM_EOC
-+#define OAM_EOC 0
-+#endif
-+#ifndef OLAYDP
-+#define OLAYDP 0
-+#endif
-+#ifndef SNR_UPDATE
-+#define SNR_UPDATE 0
-+#endif
-+#ifndef US_CRC_RETRAIN
-+#define US_CRC_RETRAIN 0
-+#endif
-+#ifndef ADSL2_BSWP
-+#define ADSL2_BSWP 0
-+#endif
-+#ifndef DMT_BIS
-+#define DMT_BIS  0
-+#endif
-+#ifndef DS_RX_CODEWORD
-+#define DS_RX_CODEWORD 0
-+#endif
-+
-+#else
-+#define DSPDP_CHIPSET_ID      CHIPSET_ID_UNKN
-+#define DSPDP_CHIPSET_ID2     CHIPSET_ID2_GENERIC
-+#define DSPDP_CHIPSET_GEN     0
-+#define DSPDP_HARDWARE_REV1   '0'
-+#define DSPDP_HARDWARE_REV2   '0'
-+#define DSPDP_FEATURE_CODE    0
-+#endif
-+
-+// For use in checking the code in drivers -- indented to avoid .h->.ah
-+ #define STANDARD_is_T1413(code)      (!(((code) & STANDARD_BITS_MASK) ^  STANDARD_BITS_T1413))
-+ #define STANDARD_is_GLITE(code)      (!(((code) & STANDARD_BITS_MASK) ^  STANDARD_BITS_GLITE))
-+ #define STANDARD_is_GHS(code)          (((code) & STANDARD_BITS_MASK) &  STANDARD_BITS_GHS)
-+ #define STANDARD_is_GDMT(code)       (!(((code) & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GHS)))
-+ #define STANDARD_is_MULTIMODE(code)  (!(((code) & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GLITE | STANDARD_BITS_GDMT)))
-+ #define SERVICE_is_POTS(code)           ((code) & SERVICE_BIT_POTS)
-+ #define SERVICE_is_ISDN_ANNEXB(code)    ((code) & SERVICE_BIT_ISDN_ANNEXB)
-+ #define SERVICE_is_ISDN_ANNEXC(code)    ((code) & SERVICE_BIT_ISDN_ANNEXC)
-+ #define SERVICE_is_ISDN_PROP(code)      ((code) & SERVICE_BIT_ISDN_PROP)
-+
-+#define STANDARD_T1413     (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^  STANDARD_BITS_T1413))
-+#define STANDARD_GLITE     (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^  STANDARD_BITS_GLITE))
-+#define STANDARD_GHS         ((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) &  STANDARD_BITS_GHS)
-+#define STANDARD_GDMT      (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GHS)))
-+#define STANDARD_MULTIMODE (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GLITE | STANDARD_BITS_GDMT)))
-+
-+#define SERVICE_POTS        (DSPDP_FEATURE_CODE & SERVICE_BIT_POTS)
-+#define SERVICE_ISDN_ANNEXB (DSPDP_FEATURE_CODE & SERVICE_BIT_ISDN_ANNEXB)
-+#define SERVICE_ISDN_ANNEXC (DSPDP_FEATURE_CODE & SERVICE_BIT_ISDN_ANNEXC)
-+#define SERVICE_ISDN_PROP   (DSPDP_FEATURE_CODE & SERVICE_BIT_ISDN_PROP)
-+#define SERVICE_ISDN        (SERVICE_ISDN_ANNEXB | SERVICE_ISDN_ANNEXC | SERVICE_ISDN_PROP)
-+
-+
-+//
-+//  Backwards compatibility with old tokens
-+//
-+
-+#if (SERVICE_POTS)
-+#ifndef ISDN
-+#define ISDN 0
-+#endif
-+#endif
-+
-+#if (SERVICE_ISDN_ANNEXB | SERVICE_ISDN_PROP)
-+#ifndef ISDN
-+#define ISDN 1
-+#endif
-+#endif
-+
-+
-+//
-+//* ===========================================================================
-+//  More Default settings
-+//* ===========================================================================
-+//
-+
-+//
-+//  BEGIN Could automatically generate showdefs code
-+//
-+#ifndef AOC
-+#define AOC 1
-+#endif
-+#ifndef ARTT
-+#define ARTT 0
-+#endif
-+#ifndef ATMBERT
-+#define ATMBERT 0
-+#endif
-+// ATM_TC_HW and SWTC are mutually exclusive
-+#ifndef ATM_TC_HW
-+#define ATM_TC_HW 1
-+#endif
-+#if ATM_TC_HW
-+#ifndef ATMBERT_HW
-+#define ATMBERT_HW 1
-+#endif
-+#ifndef SWTC
-+#define SWTC 0
-+#endif
-+#else // else case for #if ATM_TC_HW
-+#ifndef ATMBERT_HW
-+#define ATMBERT_HW 0
-+#endif
-+#ifndef SWTC
-+#define SWTC 1
-+#endif
-+#endif // end of #if ATM_TC_HW
-+#ifndef ATM_TC_PATH1_ON
-+#define ATM_TC_PATH1_ON 0
-+#endif
-+#ifndef BITSWAP
-+#define BITSWAP 1
-+#endif
-+#ifndef COMB_LINEDIAG_ENABLE
-+#define COMB_LINEDIAG_ENABLE  0
-+#endif
-+#ifndef CODEC_EMU
-+#define CODEC_EMU 0
-+#endif
-+#ifndef CO_PROFILE
-+#define CO_PROFILE 1
-+#endif
-+#ifndef DDC
-+#define DDC 0
-+#endif
-+#ifndef DEBUG_ADSL2
-+#define DEBUG_ADSL2 0 
-+#endif
-+#ifndef DEBUG_DUMP
-+#define DEBUG_DUMP 0
-+#endif
-+#ifndef DEBUG_LOG
-+#define DEBUG_LOG 0
-+#endif
-+#ifndef DEV_DEBUG
-+#define DEV_DEBUG 0
-+#endif
-+#ifndef DS_LOOP_BACK
-+#define DS_LOOP_BACK 0
-+#endif
-+#ifndef DS_RX_CODEWORD
-+#define DS_RX_CODEWORD 1
-+#endif
-+#ifndef LOOP_BACK_DEBUG
-+#define LOOP_BACK_DEBUG 0
-+#endif
-+#ifndef US_LOOP_BACK
-+#define US_LOOP_BACK 0
-+#endif
-+#ifndef DPLL_MODE
-+#define DPLL_MODE 0
-+#endif
-+#ifndef DSPBIOSII
-+#define DSPBIOSII 0
-+#endif
-+#ifndef DMT_BIS
-+#define DMT_BIS 1
-+#endif
-+#ifndef ADSL2_1BIT_TONE
-+#define ADSL2_1BIT_TONE 0
-+#endif
-+#ifndef ADSL2_BSWP
-+#define ADSL2_BSWP 1
-+#endif
-+#ifndef MEM_STR
-+#define MEM_STR 0
-+#endif
-+#ifndef DS_PWR_CUTBACK
-+#define DS_PWR_CUTBACK 0
-+#endif
-+#ifndef DUAL_TEQ
-+#define DUAL_TEQ 1
-+#endif
-+#ifndef EXTERNBERT
-+#define EXTERNBERT 0
-+#endif
-+#ifndef FPGA
-+#define FPGA 0
-+#endif
-+#ifndef INBAND
-+#define INBAND 0
-+#endif
-+#ifndef ISDN
-+#define ISDN 0
-+#endif
-+#ifndef ISDN_DEBUG
-+#define ISDN_DEBUG 0
-+#endif
-+#ifndef LINE_DIAG
-+#define LINE_DIAG 1
-+#endif
-+#ifndef LOOP_BACK_DEBUG
-+#define LOOP_BACK_DEBUG 0
-+#endif
-+#ifndef MANUFACTURING_TESTS
-+#define MANUFACTURING_TESTS 0
-+#endif
-+#ifndef MARGIN_DELTA_RETRAIN
-+#define MARGIN_DELTA_RETRAIN 1
-+#endif
-+#ifndef MEM_STR
-+#define MEM_STR 0
-+#endif
-+#ifndef MFGR_DIAG
-+#define MFGR_DIAG 0
-+#endif
-+#ifndef NLNOISEADJSNR
-+#define NLNOISEADJSNR 0
-+#endif
-+#ifndef NLNOISEADJSNR_EC
-+#define NLNOISEADJSNR_EC 0
-+#endif
-+#ifndef NTR_MODE
-+#define NTR_MODE 0
-+#endif
-+#ifndef OAM_EOC
-+#define OAM_EOC 1
-+#endif
-+#ifndef OLAYDP
-+#define OLAYDP 0
-+#endif
-+#ifndef OLAYDP_EMIF
-+#define OLAYDP_EMIF 0
-+#endif
-+#ifndef OLAYDP_2STEP
-+#define OLAYDP_2STEP 0
-+#endif
-+#ifndef OLAYDP_PCI
-+#define OLAYDP_PCI 0
-+#endif
-+#ifndef OUTBAND
-+#define OUTBAND 0
-+#endif
-+#ifndef OVHD_PMDTEST_PARA
-+#define OVHD_PMDTEST_PARA 0
-+#endif
-+#ifndef PERTONE_EQ
-+#define PERTONE_EQ 0
-+#endif
-+#ifndef PHY_EC_ENABLE
-+#define PHY_EC_ENABLE 1
-+#endif
-+#ifndef PHY_HYB_ENABLE
-+#define PHY_HYB_ENABLE 1
-+#endif
-+#ifndef PHY_NDIAG_ENABLE
-+#define PHY_NDIAG_ENABLE 0
-+#endif
-+#ifndef PHY_PATH_ENABLE
-+#define PHY_PATH_ENABLE 1
-+#endif
-+#ifndef PHY_TDW_ENABLE
-+#define PHY_TDW_ENABLE 0
-+#endif
-+#ifndef TC_ATM_PCIMASTER
-+#define TC_ATM_PCIMASTER 0
-+#endif
-+#ifndef SEPARATE_TX_RX_BUFFERS
-+#define SEPARATE_TX_RX_BUFFERS 0
-+#endif
-+#ifndef SHALF
-+#define SHALF 0
-+#endif
-+#ifndef SPECTRAL_SHAPING
-+#define SPECTRAL_SHAPING 1
-+#endif
-+#ifndef SNR_UPDATE
-+#define SNR_UPDATE 1
-+#endif
-+#ifndef TC_DEBUG
-+#define TC_DEBUG 0
-+#endif
-+#ifndef TC_LOOPBACK
-+#define TC_LOOPBACK 0
-+#endif
-+#ifndef TESTMODE
-+#define TESTMODE 0
-+#endif
-+#ifndef TRELLIS
-+#define TRELLIS 1
-+#endif
-+#ifndef TXDF2B_PROFILING
-+#if (SERVICE_POTS & (!MFGR_DIAG) & (CO_PROFILE))
-+#define TXDF2B_PROFILING 1
-+#else
-+#define TXDF2B_PROFILING 0
-+#endif
-+#endif
-+#ifndef US_CRC_RETRAIN
-+#define US_CRC_RETRAIN 1
-+#endif
-+#ifndef US_LOOP_BACK
-+#define US_LOOP_BACK 0
-+#endif
-+#ifndef USB
-+#define USB 0
-+#endif
-+#ifndef READSL2_ENABLE
-+#define READSL2_ENABLE 1
-+#endif
-+
-+// Interop tokens
-+#ifndef GHS_NON_STD_FIELD
-+#define GHS_NON_STD_FIELD 0
-+#endif
-+#ifndef LUCENT_ANYMEDIA_ENIATT_INTEROP
-+#define LUCENT_ANYMEDIA_ENIATT_INTEROP 0
-+#endif
-+
-+
-+//
-+//  END Could automatically generate showdefs code
-+//
-+#if DSPDP_FEATURE_CODE
-+#else
-+// Unrecognized_suffix____check_spelling
-+#endif
-+//
-+//  LNK_CMD is set when running CPP to generate lnk_cpe.cmd file
-+//  -- the linker is not happy when it sees C code show up in the
-+//  result!
-+//
-+#ifndef LNK_CMD
-+extern int compile_happy;  // Keep the compiler from complaining about an empty file
-+#endif
-+
-+#endif
-+
-diff -urN linux.old/drivers/atm/sangam_atm/env_def_typedefs.h linux.dev/drivers/atm/sangam_atm/env_def_typedefs.h
---- linux.old/drivers/atm/sangam_atm/env_def_typedefs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/env_def_typedefs.h	2005-08-23 04:46:50.104842632 +0200
-@@ -0,0 +1,228 @@
-+#ifndef __ENV_DEF_TYPEDEFS_H__
-+#define __ENV_DEF_TYPEDEFS_H__ 1
-+
-+/*******************************************************************************
-+*  FILE PURPOSE: Define data types for C and TMS320C6x C compilers
-+********************************************************************************
-+*
-+*  FILE NAME: dpsys_typedefs.h
-+*
-+*  DESCRIPTION:
-+*        This file contains the main typedefs that we need.
-+*
-+*  HISTORY:
-+*
-+*  03/11/97  Bob Lee      Created
-+*  03/13/97  Chishtie
-+*  03/14/97  Bob Lee      Format change to meet "Engineering Model
-+*                         - System Architucture Specification"
-+*                         Rev AP3.  Jan. 29, 1997
-+*  07/21/00  Barnett      Moved many common typedefs from
-+*                         host i/f header file to here.
-+*  03/30/01  Barnett      Mod's per driver team feedback.
-+*                         Some tokens cannot be def'ed
-+*                         if _WINDEF_ is def'ed.
-+*  04/05/01  Barnett      Added DSPDP_ prefix to tokens that originate
-+*                         in the public interface.
-+*  06/01/01  J. Bergsagel Modified to add standard typedefs
-+*  07/25/01  J. Bergsagel Changed name from typedefs.h to dpsys_typedefs.h
-+*  07/30/01  J. Bergsagel Moved typedefs that were conflicting with Windows
-+*                         driver software to the "#ifndef _WINDEF_" section.
-+*  08/09/01  S. Yim       Moved FALSE/TRUE definitions from ctl_interface_u.h
-+*                         (conflict with BIOS/std.h)
-+*  09/03/01  S. Yim       Do not include typedef char and float if _STD defined
-+*                         (conflict with BIOS/std.h)
-+*  01/21/03  MCB          Implemented Ax7 UNIT-MODULE modular software framework.
-+*  03/20/03  Mallesh      Defined size of basic variables
-+*  03/27/03  F. Mujica    Added SINT40 and UINT40 definitions.
-+*
-+*  (C) Copyright Texas Instruments Inc. 1997-2001.  All rights reserved.
-+*******************************************************************************/
-+
-+// Common type definitions
-+
-+// Basic constants needed everywhere
-+#ifndef STD_
-+#define FALSE 0
-+#define TRUE 1
-+#endif
-+
-+// Read-Write Data Types
-+typedef signed char           SINT8;      // Signed 8-bit integer (7-bit magnitude)
-+typedef unsigned char         UINT8;      // Unsigned 8-bit integer
-+typedef signed short          SINT16;     // Signed 16-bit integer (15-bit magnitude)
-+typedef unsigned short        UINT16;     // Unsigned 16-bit integer
-+typedef signed int            SINT32;     // Signed 32-bit integer (31-bit magnitude)
-+typedef unsigned int          UINT32;     // Unsigned 32-bit integer
-+typedef long signed int       SINT40;     // Long signed 40-bit integer
-+typedef long unsigned int     UINT40;     // Long unsigned 40-bit integer
-+
-+// All pointers are 32 bits long
-+typedef SINT8                 *PSINT8;    // Pointer to SINT8
-+typedef UINT8                 *PUINT8;    // Pointer to UINT8
-+typedef SINT16                *PSINT16;   // Pointer to SINT16
-+typedef UINT16                *PUINT16;   // Pointer to UINT16
-+typedef SINT32                *PSINT32;   // Pointer to SINT32
-+typedef UINT32                *PUINT32;   // Pointer to UINT32
-+
-+#define SIZEOF_SINT8          1
-+#define SIZEOF_UINT8          1
-+#define SIZEOF_SINT16         2
-+#define SIZEOF_UINT16         2
-+#define SIZEOF_SINT32         4
-+#define SIZEOF_UINT32         4
-+#define SIZEOF_SINT40         8
-+#define SIZEOF_UINT40         8
-+
-+// Size of Read-Write Data Types - in bytes
-+#define SIZEOF_char   1
-+#define SIZEOF_Int8   1
-+#define SIZEOF_UChar  1
-+#define SIZEOF_UInt8  1
-+#define SIZEOF_Float  4
-+#define SIZEOF_Double 8
-+#define SIZEOF_byte   1
-+
-+// Read-Only Data Types - should be only used for ROM code
-+typedef const char            CharRom;    // 8 bit signed character
-+typedef const signed char     Int8Rom;    // 8 bit signed integer
-+typedef const unsigned char   UCharRom;    // 8 bit unsigned character
-+typedef const unsigned char   UInt8Rom;   // 8 bit unsigned integer
-+typedef const float           FloatRom;   // IEEE 32-bit
-+typedef const double          DoubleRom;  // IEEE 64-bit
-+
-+#ifndef _WINDEF_ 
-+
-+// Read-Write Data Types
-+typedef signed char           Int8;       // 8 bit signed integer
-+typedef unsigned char         UChar;      // 8 bit unsigned character
-+typedef unsigned char         UInt8;      // 8 bit unsigned integer
-+#ifndef STD_
-+typedef char                  Char;       // 8 bit signed character
-+typedef float                 Float;      // IEEE 32-bit
-+#endif
-+typedef double                Double;     // IEEE 64-bit
-+typedef signed char           byte;       // 8 bit signed integer
-+
-+
-+// These typedefs collide with those in Win2k DDK inc\WINDEF.H
-+
-+// common type definition
-+typedef unsigned char   BYTE;    // 8-bit
-+typedef signed short    SHORT;   // 16-bit signed
-+typedef unsigned short  WORD;    // 16-bit
-+typedef unsigned int    DWORD;   // 32-bit, TI DSP has 40 bit longs
-+
-+// All pointers are 32 bits long
-+typedef BYTE           *PBYTE;  // pointer to 8 bit data
-+typedef unsigned char  *PCHAR;  // pointer to 8 bit data
-+typedef SHORT          *PSHORT; // pointer to 16 bit data
-+typedef WORD           *PWORD;  // pointer to 16 bit data
-+typedef DWORD          *PDWORD; // pointer to 32 bit data
-+
-+#endif // #ifndef _WINDEF_
-+
-+
-+#define SIZEOF_BYTE   1
-+#define SIZEOF_SHORT  2
-+#define SIZEOF_WORD   2
-+#define SIZEOF_DWORD  4
-+#define SIZEOF_PCHAR  4
-+#define SIZEOF_PWORD  4
-+#define SIZEOF_PDWORD 4
-+
-+// Size of Read-Only Data Types - in bytes
-+#define SIZEOF_CharRom   1
-+#define SIZEOF_Int8Rom   1
-+#define SIZEOF_UCharRom  1
-+#define SIZEOF_UInt8Rom  1
-+#define SIZEOF_FloatRom  4
-+#define SIZEOF_DoubleRom 8
-+
-+#define SIZEOF_complex_byte     (2*SIZEOF_byte)
-+#define SIZEOF_PTR_complex_byte 4
-+typedef struct {
-+  byte    re;
-+  byte    im;
-+} complex_byte, *PTR_complex_byte;
-+
-+#define SIZEOF_complex_short   4
-+#define SIZEOF_PTR_complex_short 4
-+typedef struct {
-+  short   re;
-+  short   im;
-+} complex_short, *PTR_complex_short;
-+
-+#define SIZEOF_complex_int     8
-+#define SIZEOF_PTR_complex_int 4
-+typedef struct {
-+  int     re;
-+  int     im;
-+} complex_int, *PTR_complex_int;
-+
-+typedef struct {
-+  int high;
-+  unsigned int low;
-+} int64;
-+
-+typedef struct {
-+  int64 real;
-+  int64 imag;
-+} complex_int64;
-+
-+#define SIZEOF_PVOID 4
-+typedef void *PVOID;            // pointer to void
-+
-+//* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-+
-+#if defined(_TMS320C6X)           // TMS320C6xx type definitions 
-+
-+// Read-Write Data Types 
-+typedef short                   Int16;      // 16 bit signed integer 
-+typedef unsigned short          UInt16;     // 16 bit unsigned integer 
-+typedef int                     Int32;      // 32 bit signed integer 
-+typedef unsigned int            UInt32;     // 32 bit unsigned signed integer 
-+typedef long                    Long40;     // 40 bit signed integer 
-+typedef unsigned long           ULong40;    // 40 bit unsigned signed integer 
-+
-+// Size of Read-Write Data Types - in bytes
-+#define SIZEOF_Int16   2
-+#define SIZEOF_UInt16  2
-+#define SIZEOF_Int32   4
-+#define SIZEOF_UInt32  4
-+#define SIZEOF_Long40  5
-+#define SIZEOF_ULong40 5
-+
-+// Read-Only Data Types - should be only used for ROM code
-+typedef const short             Int16Rom;   // 16 bit signed integer 
-+typedef const unsigned short    UInt16Rom;  // 16 bit unsigned integer 
-+typedef const int               Int32Rom;   // 32 bit signed integer 
-+typedef const unsigned int      UInt32Rom;  // 32 bit unsigned signed integer 
-+typedef const long              Long40Rom;  // 40 bit signed integer 
-+typedef const unsigned long     ULong40Rom; // 40 bit unsigned signed integer 
-+
-+// Size of Read-Only Data Types - in bytes
-+#define SIZEOF_Int16Rom   2
-+#define SIZEOF_UInt16Rom  2
-+#define SIZEOF_Int32Rom   4
-+#define SIZEOF_UInt32Rom  4
-+#define SIZEOF_Long40Rom  5
-+#define SIZEOF_ULong40Rom 5
-+
-+#else                             // 32 bits PC Host type definitions 
-+
-+// Read-Write Data Types 
-+typedef short                   Int16;      // 16 bit signed integer 
-+typedef unsigned short          UInt16;     // 16 bit unsigned integer 
-+typedef int                     Int32;      // 32 bit signed integer 
-+typedef unsigned int            UInt32;     // 32 bit unsigned integer 
-+
-+// Read-Only Data Types - should be only used for ROM code 
-+typedef const short             Int16Rom;   // 16 bit signed integer 
-+typedef const unsigned short    UInt16Rom;  // 16 bit unsigned integer 
-+typedef const int               Int32Rom;   // 32 bit signed integer 
-+typedef const unsigned int      UInt32Rom;  // 32 bit unsigned integer 
-+
-+#endif
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/Makefile linux.dev/drivers/atm/sangam_atm/Makefile
---- linux.old/drivers/atm/sangam_atm/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/Makefile	2005-08-23 04:46:50.104842632 +0200
-@@ -0,0 +1,35 @@
-+# File: drivers/net/avalanche_cpmac/Makefile
-+#
-+# Makefile for the Linux network (CPMAC) device drivers.
-+#
-+
-+
-+O_TARGET := tiatm.o
-+obj-$(CONFIG_MIPS_SANGAM_ATM) += tiatm.o
-+list-multi      := tiatm.o
-+
-+tiatm-objs	:= tn7atm.o tn7dsl.o tn7sar.o dsl_hal_api.o dsl_hal_support.o cpsar.o aal5sar.o
-+
-+EXTRA_CFLAGS += -DEL -I$(TOPDIR)/drivers/atm/sangam_atm -DPOST_SILICON -DCOMMON_NSP -DCONFIG_LED_MODULE -DDEREGISTER_LED -DNO_ACT
-+
-+ifeq ($(ANNEX),B)
-+EXTRA_CFLAGS += -DANNEX_B -DB
-+else
-+ifeq ($(ANNEX),C)
-+EXTRA_CFLAGS += -DANNEX_C -DC
-+else
-+EXTRA_CFLAGS += -DANNEX_A -DP
-+endif
-+endif
-+
-+
-+include $(TOPDIR)/Rules.make
-+
-+tiatm.o:      $(tiatm-objs)
-+	$(LD) -r -o $@ $(tiatm-objs)
-+
-+#avalanche_cpmac.o:      $(avalanche_cpmac-objs)
-+#	$(LD) -r -o $@ $(avalanche_cpmac-objs)
-+
-+clean:
-+	rm -f core *.o *.a *.s
-diff -urN linux.old/drivers/atm/sangam_atm/queue.h linux.dev/drivers/atm/sangam_atm/queue.h
---- linux.old/drivers/atm/sangam_atm/queue.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/queue.h	2005-08-23 04:46:50.104842632 +0200
-@@ -0,0 +1,167 @@
-+
-+#if !defined( __QUEUE_H__ )
-+#define __QUEUE_H__
-+
-+typedef spinlock_t OS_SPIN_LOCK;
-+#define osFreeSpinLock(pLock) while(0)
-+void osAcquireSpinLock(OS_SPIN_LOCK *pLock);
-+void osReleaseSpinLock(OS_SPIN_LOCK *pLock);
-+void osAllocateSpinLock(OS_SPIN_LOCK *pLock);
-+
-+//#define osAcquireSpinLock(pLock) spin_lock(pLock)
-+//#define osReleaseSpinLock(pLock) spin_unlock(pLock)
-+//#define osAllocateSpinLock(pLock) spin_lock_init(pLock)
-+
-+
-+typedef struct _TI_LIST_ENTRY {
-+  struct _TI_LIST_ENTRY *Flink;
-+  struct _TI_LIST_ENTRY *Blink;
-+} TI_LIST_ENTRY, *PTI_LIST_ENTRY, TQE, *PTQE;
-+
-+typedef struct _TIATM_LIST_ENTRY 
-+{
-+  TI_LIST_ENTRY  Link;
-+} TIATM_LIST_ENTRY, *PTIATM_LIST_ENTRY;
-+
-+//-------------------------------------------------------------------------
-+// QueueInitList -- Macro which will initialize a queue to NULL.
-+//-------------------------------------------------------------------------
-+#define QueueInitList(_L) (_L)->Link.Flink = (_L)->Link.Blink = (PTI_LIST_ENTRY)0;
-+
-+//-------------------------------------------------------------------------
-+// QueueEmpty -- Macro which checks to see if a queue is empty.
-+//-------------------------------------------------------------------------
-+#define QueueEmpty(_L) (QueueGetHead((_L)) == (PTIATM_LIST_ENTRY)0)
-+
-+//-------------------------------------------------------------------------
-+// QueueGetHead -- Macro which returns the head of the queue, but does not
-+// remove the head from the queue.
-+//-------------------------------------------------------------------------
-+#define QueueGetHead(_L) ((PTIATM_LIST_ENTRY)((_L)->Link.Flink))
-+
-+#define QueueGetNext(Elem) ((PTIATM_LIST_ENTRY)((Elem)->Link.Flink))
-+
-+//-------------------------------------------------------------------------
-+// QueuePushHead -- Macro which puts an element at the head of the queue.
-+//-------------------------------------------------------------------------
-+#define QueuePushHead(_L,_E) \
-+  if (!((_E)->Link.Flink = (_L)->Link.Flink)) \
-+  { \
-+    (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
-+  } \
-+(_L)->Link.Flink = (PTI_LIST_ENTRY)(_E);
-+
-+//-------------------------------------------------------------------------
-+// QueueRemoveHead -- Macro which removes the head of the head of queue.
-+//-------------------------------------------------------------------------
-+#define QueueRemoveHead(_L) \
-+{                                                     \
-+  PTIATM_LIST_ENTRY ListElem;                        \
-+  if (ListElem = (PTIATM_LIST_ENTRY)(_L)->Link.Flink) \
-+  {   \
-+    if(!((_L)->Link.Flink = ListElem->Link.Flink)) \
-+      (_L)->Link.Blink = (PTI_LIST_ENTRY) 0; \
-+  } \
-+}
-+
-+//-------------------------------------------------------------------------
-+// QueuePutTail -- Macro which puts an element at the tail (end) of the queue.
-+//-------------------------------------------------------------------------
-+#define QueuePutTail(_L,_E) \
-+{ \
-+  if ((_L)->Link.Blink) \
-+  { \
-+    ((PTIATM_LIST_ENTRY)(_L)->Link.Blink)->Link.Flink = (PTI_LIST_ENTRY)(_E); \
-+    (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
-+  } \
-+  else \
-+  { \
-+    (_L)->Link.Flink = \
-+    (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
-+  } \
-+  (_E)->Link.Flink = (PTI_LIST_ENTRY)0; \
-+}
-+
-+//-------------------------------------------------------------------------
-+// QueuePutTailWithLock -- Macro which puts an element at the tail (end) of 
-+// the queue, using spin lock.
-+//-------------------------------------------------------------------------
-+#define QueuePutTailWithLock(_L,_E, pLock) \
-+{ \
-+  osAcquireSpinLock(pLock); \
-+  if ((_L)->Link.Blink) \
-+  { \
-+    ((PTIATM_LIST_ENTRY)(_L)->Link.Blink)->Link.Flink = (PTI_LIST_ENTRY)(_E); \
-+    (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
-+  } \
-+  else \
-+  { \
-+    (_L)->Link.Flink = \
-+    (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
-+  } \
-+  (_E)->Link.Flink = (PTI_LIST_ENTRY)0; \
-+  osReleaseSpinLock(pLock); \
-+}
-+
-+//-------------------------------------------------------------------------
-+// QueueGetTail -- Macro which returns the tail of the queue, but does not
-+// remove the tail from the queue.
-+//-------------------------------------------------------------------------
-+#define QueueGetTail(_L) ((PTIATM_LIST_ENTRY)((_L)->Link.Blink))
-+
-+//-------------------------------------------------------------------------
-+// QueuePopHead -- Macro which  will pop the head off of a queue (list), and
-+//                 return it (this differs only from queueremovehead only in 
-+//                 the 1st line)
-+//-------------------------------------------------------------------------
-+#define QueuePopHead(_L) \
-+(PTIATM_LIST_ENTRY) (_L)->Link.Flink; QueueRemoveHead(_L);
-+
-+#define QueueRemoveTail(_L)  \
-+{                                                     \
-+  PTIATM_LIST_ENTRY ListElem;                        \
-+  ListElem = (PTIATM_LIST_ENTRY)(_L)->Link.Flink; \
-+  if(ListElem == (PTIATM_LIST_ENTRY)(_L)->Link.Blink) \
-+  {   \
-+    (_L)->Link.Flink = (_L)->Link.Blink = (PTI_LIST_ENTRY) 0; \
-+  } \
-+  else \
-+  {    \
-+    while(ListElem->Link.Flink != (PTI_LIST_ENTRY)(_L)->Link.Blink) \
-+    { \
-+      ListElem = (PTIATM_LIST_ENTRY)ListElem->Link.Flink; \
-+    } \
-+    (_L)->Link.Blink = (PTI_LIST_ENTRY) ListElem; \
-+    ListElem->Link.Flink = (PTI_LIST_ENTRY)0; \
-+  } \
-+}
-+
-+#define QueueRemoveItem(_L, Elem)  \
-+{                                                     \
-+  PTIATM_LIST_ENTRY ListElem;                        \
-+  ListElem = (PTIATM_LIST_ENTRY)(_L)->Link.Flink; \
-+  if(ListElem == Elem) \
-+  { \
-+    QueueRemoveHead(_L); \
-+  } \
-+  else \
-+  { \
-+    while(ListElem) \
-+    { \
-+      if(Elem == (PTIATM_LIST_ENTRY)ListElem->Link.Flink) \
-+      { \
-+        ListElem->Link.Flink = ((PTIATM_LIST_ENTRY)Elem)->Link.Flink; \
-+        if(Elem == (PTIATM_LIST_ENTRY)(_L)->Link.Blink) \
-+          (_L)->Link.Blink = (PTI_LIST_ENTRY) 0; \
-+        break; \
-+      } \
-+      ListElem = (PTIATM_LIST_ENTRY)ListElem->Link.Flink; \
-+    }\
-+  } \
-+  ((PTIATM_LIST_ENTRY)Elem)->Link.Flink = (PTI_LIST_ENTRY) 0; \
-+}
-+
-+#define QueuePopTail(_L)  \
-+((PTIATM_LIST_ENTRY)((_L)->Link.Blink)); QueueRemoveTail(_L); 
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/release.txt linux.dev/drivers/atm/sangam_atm/release.txt
---- linux.old/drivers/atm/sangam_atm/release.txt	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/release.txt	2005-08-23 04:46:50.104842632 +0200
-@@ -0,0 +1,118 @@
-+This is release notes for AR7 Linux ATM driver.
-+
-+version 04.02.04.00
-+-------------------
-+
-+1. Corrected the conditional logic from logical AND to logical OR in the case
-+   of check for DSL line down condition.  This is to fix PPPoA crashing
-+   problem when DSL line is unplugged.
-+
-+version 04.02.03.00
-+-------------------
-+1. Changed overlay page to static allocation.
-+2. Added flag to stop TX during channel closing.
-+3. Changed DMA memory allocation back to "GFP_ATOMIC" flag.
-+
-+version 04.02.02.00
-+-------------------
-+1. Changed DMA memory allocation from "GFP_ATOMIC" to  "GFP_KERNEL" flag.
-+2. Added "DoMask" setting for VBR channel setup.
-+
-+version 04.02.01.01
-+-------------------
-+1. Modified priority check scheme per SPTC request.
-+
-+Version 04.02.01.00
-+-------------------
-+1. Add check to skb->priority to place packets to either normal or priority queue.
-+2. Add spin lock to increment and decrement of queued buffer number.
-+
-+Version 04.02.00.00
-+-------------------
-+Features:
-+1. Add MBS and CDVT QoS support for ATM driver.
-+2. Add "stop/start queue" for ToS application.
-+3. Add Showtime margin retrain based on EOC message.
-+4. Add EOC vendor ID customalization logic for Annex B.
-+5. Supports D3 datapump.
-+
-+Version 04.01.00.00
-+-------------------
-+Re-release of 04.00.07.00 for D1.1 datapump.
-+
-+Version 04.00.07.00
-+-------------------
-+Features:
-+1. Add marging retrain capability by setting following Adam2 Env.
-+   setenv enable_margin_retrain 1
-+   setenv margin_threshold xx, xx is in half db, i.e., 10 means 5db.
-+
-+Bugfixs:
-+1. New PDSP firmware that fix the F5 OAM cell loopback probelm in Cisco DSLAM.
-+
-+Version 04.00.06.00
-+-------------------
-+1. ATM interrupt pacing is defauted to 2 interrupts/s.
-+2. Rx Service MAX changed ftom 16 to 8.
-+
-+Version 04.00.05.00
-+-------------------
-+Features:
-+1. Add Adam2 env to disable the TurboDSL by entering "setenv TurboDSL 0".
-+2. Add ability to set interrupt pacing for ATM driver.
-+
-+Bugfixs:
-+1. Fixed the RFC2684 and CLIP problems for Cisco router.
-+2. Fixed LED blinking problem when DSL cable is unplugged.
-+3. Fixed problem that "selected mode" is not updated.
-+
-+Version 04.00.04.00
-+-------------------
-+Features:
-+1. Added feature so OAM F5 ping will not require a corresponding PVC channel to
-+   be setup.
-+2. Added timeout value for F5 OAM ping. The new command are "exxxpyyycdzzzt" for
-+   end-to-end and "sxxxpyyycdzzzt" for segment. "zzz" is timeout value in milli-second.
-+3. Added proc entry "avsar_pvc_table" to record received VPIs and VCIs. The format is 
-+	vpi,vci
-+   seperated by new line. To search for PVCs, an application can do the following.
-+	i) Send a (or several) F5 OAM cell on a VPI/VPI pairs with command 
-+	   echo exxxpyyycd2t > /proc/sys/dev/dslmod
-+	ii) Wait >2ms or poll proc entry /proc/avalanche/avsar_oam_ping until the result
-+	   indicates a failure. (It will be failed all the time with 2ms timeout.)
-+	iii) Repeat above two steps for new VPI/VCI pairs.
-+      iv) Check proc entry /proc/avalanche/avsar_pvc_table any time for PVCs that responded.
-+  
-+Version 04.00.03.00
-+-------------------
-+Bug Fixs:
-+1. Fixed bug that caused crash when phone cable is unplugged.
-+2. Fixed LED operation for "flexible LEDs".
-+
-+Features:
-+1. Added the proc entry "avsar_oam_ping" to signal oam ping result.
-+   0 - failed; 1 - success; 2 - in progress.
-+2. Added oam ping timeout env variable. The timeout can be specified by
-+   adding Adam2 env "oam_lb_timeout". The value is in millisecond.
-+
-+Version 04.00.02.00
-+-------------------
-+1. The driver uses hardware queue for Turbo DSL.
-+2. Added new modem statistics listed below:
-+	US and DS TX powers, atuc Vendor ID and revision, training mode selected, 
-+	Hybrid Selected, and etc.
-+
-+Version 04.00.01.00
-+-------------------
-+
-+1. This driver release contains all the features that exists in AR5 Linux ATM 
-+   3.1 driver.
-+
-+2. F4 OAM generation is added.
-+
-+3. Software queuing is used for TURBO DSL.
-+
-+4. Porting guide "is created. Please look into that document for detailed 
-+   information.
-+
-+   
-diff -urN linux.old/drivers/atm/sangam_atm/syssw_version.h linux.dev/drivers/atm/sangam_atm/syssw_version.h
---- linux.old/drivers/atm/sangam_atm/syssw_version.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/syssw_version.h	2005-08-23 04:46:50.105842480 +0200
-@@ -0,0 +1,94 @@
-+#ifndef __SYSSW_VERSION_H__
-+#define __SYSSW_VERSION_H__ 1
-+
-+/*******************************************************************************
-+* FILE PURPOSE:     DSL Driver API functions for Sangam
-+*
-+********************************************************************************
-+* FILE NAME:        dsl_hal_basicapi.c
-+*
-+* DESCRIPTION:  
-+*       Contains basic DSL HAL APIs for Sangam
-+*  
-+* (C) Copyright 2003-04, Texas Instruments, Inc.
-+*    History
-+*    Date        Version            Notes
-+*    14May03     0.00.00            RamP   Original Version Created
-+*    14May03     0.00.01            RamP   Initial Rev numbers inserted 
-+*    14May03     0.00.02            RamP   Bumped version numbers for Dsl Hal
-+*                                          & dhalapp for alpha plus
-+*    19May03     0.00.03            MCB    Bumped dslhal version number
-+*                                          because of dependant changes
-+*                                          wrt. linux-nsp atm drivers.
-+*    22May03     0.00.04            RamP   Bumped dslhal & dhalapp buildnum
-+*                                          for inner/outer pair & DGASP code
-+*    06Jun03     0.00.05            RamP   Bumped up buildnum for LED, STM, 
-+*                                          interrupt processing, statistics
-+*                                          and other pre-beta features
-+*    09Jun03     0.00.06            JEB    Fixed error in DHALAPP bugfix/buildnum
-+*    09Jun03     0.00.07            RamP   Bumped up buildnum for incremental
-+*                                          changes to apis, statistics, memory
-+*                                          fixes, parameter configurations
-+*    11Jun03     0.00.08            RamP   Bumped up buildnum for Co profile
-+*                                          free memory fix
-+*    12Jun03     0.00.09            JEB    Bumped version numbers for AR7 1.00 Beta
-+*    02Jul03     0.00.10            ZT     Bumped HAL version for overlay page
-+*    18Jul03     0.00.11            RamP   Bumped HAL version for analog diags
-+*    22Jul03     0.00.12            JEB    Bumped DHALAPP buildnum for analog diags
-+*    31Jul03     0.00.13            RamP   Bumped HAL version for engr. drop
-+*    04Aug03     0.00.14            JEB    Bumped HAL version buildnum for CHECKPOINT65 changes
-+*                                          Bumped LINUX version buildnum for CHECKPOINT65 changes
-+*    06Aug03     0.00.15            MCB    Bumped all version numbers in prep for AR7 1.0 R2 release for POTS.
-+*    13Aug03     0.00.16            MCB    Set rev id's for D3/R1.1 (ADSL2).
-+*    21Aug03     0.00.17            JEB    Bumped up build numbers for merge of code additions from D1
-+*    26Sep03     0.00.18            JEB    Set rev id's for another D3/R1 (ADSL2).
-+*    14Oct03     0.00.19            JEB    Bumped Linux minor number and reset bugfix number for release.
-+*                                          Bumped build numbers on DSLHAL and DHALAPP for this checkpoint.
-+*    14Oct03     0.00.20            JEB    Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT15.
-+*    21Oct03     0.00.21            JEB    Bumped build number on DSLHAL for CHECKPOINT16.
-+*    22Oct03     0.00.22            MCB    Bumped all version numbers in support of D3R1 release.
-+*    27Oct03     0.00.23            JEB    Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT19.
-+*                                          Updated version for DSLAGENT to be 02.01.00.01 for ACT 2.1 R0.
-+*    30Oct03     0.00.24            JEB    Bumped bugfix number on LINUXATM Version for next release.
-+*                                          Bumped build numbers on DSLHAL and DHALAPP
-+*    31Oct03     0.00.25            MCB    Bumped all version numbers in support of D3R2 release.
-+*    14Nov03     0.00.26            JEB    Bumped build numbers on DSLHAL and DHALAPP
-+*                                          Changed version for DSLAGENT to be 02.00.01.01 for an ACT 2.0 R0
-+*    20Nov03     0.00.27            JEB    Bumped build number on DSLHAL.
-+*                                          Changed version for DSLAGENT to be 02.00.02.00 for the next ACT 2.0 R2
-+*    21Nov03     0.00.28            MCB    Bumped all version numbers in support of D3R2 release.
-+*    21Nov03     0.00.29            JEB    Bumped build numbers on DSLHAL and DHALAPP for D3-R0 drop on 11/21.
-+*    16Dec03     0.00.30            JEB    Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT31.
-+*    21Dec03     0.00.31            MCB    Bumped all version numbers in support of D3R2 release.
-+*    05Jan04     0.00.32            JEB    Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 34.
-+*    15Jan04     0.00.33            JEB    Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 36.
-+*    26Jan04     0.00.34            JEB    Changed Linux ATM version number to be 04.02.03.00.
-+*    27Jan04     0.00.35            MCB    Bumped all version numbers in support of D3R2 release.
-+*******************************************************************************/
-+
-+/* Dsl Hal API Version Numbers */
-+#define DSLHAL_VERSION_MAJOR       03
-+#define DSLHAL_VERSION_MINOR       00
-+#define DSLHAL_VERSION_BUGFIX      06
-+#define DSLHAL_VERSION_BUILDNUM    00
-+#define DSLHAL_VERSION_TIMESTAMP   00
-+
-+/* dhalapp Adam2 Application Version Numbers */
-+#define DHALAPP_VERSION_MAJOR      03
-+#define DHALAPP_VERSION_MINOR      00
-+#define DHALAPP_VERSION_BUGFIX     05
-+#define DHALAPP_VERSION_BUILDNUM   00
-+
-+/* Linux ATM Driver Version Numbers */
-+#define LINUXATM_VERSION_MAJOR     04
-+#define LINUXATM_VERSION_MINOR     02
-+#define LINUXATM_VERSION_BUGFIX    04
-+#define LINUXATM_VERSION_BUILDNUM  00
-+
-+/* DSL Agent Version Numbers */
-+#define DSLAGENT_VERSION_MAJOR     02
-+#define DSLAGENT_VERSION_MINOR     00
-+#define DSLAGENT_VERSION_BUGFIX    02
-+#define DSLAGENT_VERSION_BUILDNUM  00
-+
-+#endif /* pairs with #ifndef __SYSSW_VERSION_H__ */
-diff -urN linux.old/drivers/atm/sangam_atm/tn7api.h linux.dev/drivers/atm/sangam_atm/tn7api.h
---- linux.old/drivers/atm/sangam_atm/tn7api.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/tn7api.h	2005-08-23 04:46:50.105842480 +0200
-@@ -0,0 +1,54 @@
-+/* 
-+ *    Tnetd73xx ATM driver.
-+ *    by Zhicheng Tang, ztang@ti.com
-+ *    2000 (c) Texas Instruments Inc.
-+ *
-+ *
-+*/
-+
-+#ifndef __SAPI_H
-+#define __SAPI_H
-+
-+/* tn7atm.c */
-+void xdump(unsigned char *buff, int len, int debugLev);
-+int tn7atm_receive(void *os_dev, int ch, unsigned int packet_size, void *os_receive_info, void *data);
-+void *tn7atm_allocate_rx_skb(void *os_dev, void **os_receive_info, unsigned int size);
-+void tn7atm_free_rx_skb(void *skb);
-+void tn7atm_sarhal_isr_register(void *os_dev, void *hal_isr, int interrupt_num);
-+int tn7atm_send_complete(void *osSendInfo);
-+int tn7atm_device_connect_status(void *priv, int state);
-+int tn7atm_lut_find(short vpi, int vci);
-+
-+/* tn7dsl.h */
-+void tn7dsl_exit(void);
-+int tn7dsl_init(void *priv);
-+int tn7dsl_proc_stats(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+int tn7dsl_proc_modem(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+int tn7dsl_handle_interrupt(void);
-+void dprintf( int uDbgLevel, char * szFmt, ...);
-+void tn7dsl_dslmod_sysctl_register(void);
-+void tn7dsl_dslmod_sysctl_unregister(void);
-+int tn7dsl_get_dslhal_version(char *pVer);
-+int tn7dsl_get_dsp_version(char *pVer);
-+
-+int os_atoi(const char *pStr);
-+int os_atoh(const char *pStr);
-+unsigned long os_atoul(const char *pStr);
-+
-+/* tn7sar.c */
-+int tn7sar_activate_vc(Tn7AtmPrivate *priv, short vpi, int vci, int pcr, int scr, int mbs, int cdvt, int chan, int qos);
-+int tn7sar_init(struct atm_dev *dev, Tn7AtmPrivate *priv);
-+int tn7sar_register_interrupt_handle(void *os_dev, void *hal_isr, int *interrupt_num);
-+void tn7sar_exit(struct atm_dev *dev, Tn7AtmPrivate *priv);
-+int tn7sar_deactivate_vc(Tn7AtmPrivate *priv, int chan);
-+int tn7sar_handle_interrupt(struct atm_dev *dev, Tn7AtmPrivate *priv);
-+int tn7sar_send_packet(Tn7AtmPrivate *priv, int chan, void *new_skb, void *data,unsigned int len, int priority);
-+void tn7sar_get_sar_version(Tn7AtmPrivate *priv, char **pVer);
-+int tn7sar_get_near_end_loopback_count(unsigned int *pF4count, unsigned int *pF5count);
-+int tn7sar_oam_generation(void *privContext, int chan, int type, int vpi, int vci, int timeout);
-+int tn7sar_get_stats(void *priv1);
-+int tn7sar_proc_sar_stat(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+void tn7sar_get_sar_firmware_version(unsigned int *pdsp_version_ms, unsigned int *pdsp_version_ls);
-+int tn7sar_proc_oam_ping(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+int tn7sar_proc_pvc_table(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/tn7atm.c linux.dev/drivers/atm/sangam_atm/tn7atm.c
---- linux.old/drivers/atm/sangam_atm/tn7atm.c	2005-08-28 01:52:26.000000000 -0600
-+++ linux.dev/drivers/atm/sangam_atm/tn7atm.c	2005-08-28 02:08:07.000000000 -0600
-@@ -0,0 +1,1233 @@
-+/* 
-+ *   tn7.c
-+ *   Linux atm module implementation.
-+ *   Zhicheng Tang 01/08/2003
-+ *   2003 (c) Texas Instruments Inc.
-+ *
-+ *
-+*/
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/atmdev.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+#include <linux/smp_lock.h>
-+#include <asm/io.h>
-+#include <asm/mips-boards/prom.h>
-+#include <linux/proc_fs.h>
-+#include <linux/string.h>
-+#include <linux/ctype.h>
-+#include "tn7atm.h"
-+#include "tn7api.h"
-+#include "syssw_version.h"
-+
-+#ifdef CONFIG_LED_MODULE
-+#include <asm/ar7/ledapp.h>
-+#endif
-+#include <asm/ar7/avalanche_intc.h>
-+
-+#ifdef MODULE
-+MODULE_DESCRIPTION ("Tnetd73xx ATM Device Driver");
-+MODULE_AUTHOR ("Zhicheng Tang");
-+#endif
-+
-+/* Version Information */
-+//static char atm_version[] ="1.0.0.1";
-+
-+#define TRUE   1
-+#define FALSE  0
-+
-+#define STOP_EMPTY_BUFF 2
-+#define START_EMPTY_BUFF 3
-+/* externs */
-+
-+/*end of externs */
-+
-+#define tn7atm_kfree_skb(x)     dev_kfree_skb(x)
-+
-+/* prototypes */
-+int tn7atm_open (struct atm_vcc *vcc, short vpi, int vci);
-+
-+void tn7atm_close (struct atm_vcc *vcc);
-+
-+static int tn7atm_ioctl (struct atm_dev *dev, unsigned int cmd, void *arg);
-+
-+int tn7atm_send (struct atm_vcc *vcc, struct sk_buff *skb);
-+
-+static int tn7atm_change_qos (struct atm_vcc *vcc, struct atm_qos *qos,int flags);
-+
-+static int tn7atm_detect(void);
-+static int tn7atm_init(struct atm_dev* dev);
-+//static int tn7atm_reset(void);
-+static int tn7atm_irq_request(struct atm_dev* dev);
-+static int tn7atm_proc_version(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+static void tn7atm_exit(void);
-+static int tn7atm_proc_channels(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+static int tn7atm_proc_private(char* buf, char **start, off_t offset, int count,int *eof,void *data);
-+//static void tn7atm_free_packet(void *vcc1, void *priv, void *skb1);
-+static int tn7atm_queue_packet_to_sar(void *vcc1, void *skb1);
-+
-+#include "turbodsl.c"
-+
-+/* ATM device operations */
-+
-+struct atm_dev *mydev;
-+
-+static const struct atmdev_ops tn7atm_ops = {
-+        open:           tn7atm_open,
-+        close:          tn7atm_close,
-+        ioctl:          tn7atm_ioctl,
-+        getsockopt:     NULL,
-+        setsockopt:     NULL,
-+        send:           tn7atm_send,
-+        sg_send:          NULL,
-+        phy_put:          NULL,
-+        phy_get:          NULL,
-+        change_qos:     tn7atm_change_qos,
-+};
-+
-+
-+int __guDbgLevel = 1;
-+
-+
-+void xdump(unsigned char *buff, int len, int debugLev)
-+{
-+#ifdef DEBUG_BUILD
-+  int i, j;
-+  if( __guDbgLevel < debugLev)
-+    return;
-+
-+  j=0;
-+  for(i=0;i<len;i++)
-+  {
-+    printk("%02x ", buff[i]);
-+    j++;
-+    if(j==8)
-+    {
-+      j=0;
-+      printk("\n");
-+    }
-+  }
-+  printk("\n");
-+#endif
-+}
-+
-+
-+#if 0 /* by nbd */
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int tn7atm_walk_vccs(struct atm_dev *dev, short *vcc, int *vci)
-+ *
-+ *  Description: retrieve VPI/VCI for connection
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+static int
-+tn7atm_walk_vccs(struct atm_vcc *vcc, short *vpi, int *vci)
-+{
-+  struct atm_vcc* walk;
-+
-+  //    printk(tn7 "tn7atm_walk_vccs\n");
-+  /* find a free VPI */
-+  if (*vpi == ATM_VPI_ANY) {
-+
-+    for (*vpi = 0, walk = vcc->dev->vccs; walk; walk = walk->next) {
-+
-+      if ((walk->vci == *vci) && (walk->vpi == *vpi)) {
-+        (*vpi)++;
-+        walk = vcc->dev->vccs;
-+      }
-+    }
-+  }
-+
-+  /* find a free VCI */
-+  if (*vci == ATM_VCI_ANY) {
-+        
-+    for (*vci = ATM_NOT_RSV_VCI, walk = vcc->dev->vccs; walk; walk = walk->next) {
-+
-+      if ((walk->vpi = *vpi) && (walk->vci == *vci)) {
-+        *vci = walk->vci + 1;
-+        walk = vcc->dev->vccs;
-+      }
-+    }
-+  }
-+
-+  return 0;
-+}
-+#endif
-+
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int tn7atm_sar_irq(void)
-+ *
-+ *  Description: tnetd73xx SAR interrupt.
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+static void
-+tn7atm_sar_irq(int irq , void *voiddev , struct pt_regs *regs)
-+{
-+  struct atm_dev *atmdev;
-+  Tn7AtmPrivate *priv;
-+
-+  dprintf(6, "tn7atm_sar_irq\n");
-+  atmdev = (struct atm_dev *) voiddev;
-+  priv = (Tn7AtmPrivate *)atmdev->dev_data;
-+
-+  tn7sar_handle_interrupt(atmdev, priv);
-+ 
-+  dprintf(6, "Leaving tn7atm_sar_irq\n");
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int tn7atm_dsl_irq(void)
-+ *
-+ *  Description: tnetd73xx DSL interrupt.
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+static void
-+tn7atm_dsl_irq(int irq , void *voiddev , struct pt_regs *regs)
-+{
-+  struct atm_dev *atmdev;
-+  Tn7AtmPrivate *priv;
-+
-+  dprintf(4, "tn7atm_dsl_irq\n");
-+  atmdev = (struct atm_dev *) voiddev;
-+  priv = (Tn7AtmPrivate *)atmdev->dev_data;
-+
-+  tn7dsl_handle_interrupt();
-+ 
-+  dprintf(4, "Leaving tn7atm_dsl_irq\n");
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int tn7atm_Inittxcomp(struct tn7* tn7)
-+ *
-+ *  Description: Initialize Interrupt handler
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
-+static int __init
-+tn7atm_irq_request (struct atm_dev *dev)
-+{
-+  Tn7AtmPrivate *priv;
-+  char *ptr;
-+  int ipace=2;
-+
-+  dprintf(4, "tn7atm_irq_request()\n");
-+  priv = (Tn7AtmPrivate *) dev->dev_data;
-+
-+  /* Register SAR interrupt */
-+  priv->sar_irq = LNXINTNUM(ATM_SAR_INT);       /* Interrupt line # */
-+  if (request_irq(priv->sar_irq, tn7atm_sar_irq, SA_INTERRUPT, "SAR ", dev))
-+    printk ("Could not register tn7atm_sar_irq\n");
-+
-+  /* interrupt pacing */
-+  ptr= prom_getenv("sar_ipacemax");
-+  if(ptr)
-+  {
-+    ipace=os_atoi(ptr);
-+  }
-+  avalanche_request_pacing(priv->sar_irq, ATM_SAR_INT_PACING_BLOCK_NUM, ipace);
-+
-+  /* Reigster Receive interrupt A */
-+  priv->dsl_irq = LNXINTNUM(ATM_DSL_INT);       /* Interrupt line # */
-+  if (request_irq(priv->dsl_irq, tn7atm_dsl_irq, SA_INTERRUPT, "DSL ", dev))
-+    printk ("Could not register tn7atm_dsl_irq\n");
-+
-+  return 0;
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int tn7atm_lut_find(struct atm_vcc *vcc)
-+ *
-+ *  Description: find an TX DMA channel
-+ *               that matches a vpi/vci pair
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
-+int
-+tn7atm_lut_find(short vpi, int vci)
-+{
-+  int      i;
-+  Tn7AtmPrivate *priv;
-+  
-+  priv = (Tn7AtmPrivate *)mydev->dev_data;
-+
-+  if(vci==0) // find first vpi channel
-+  {
-+    for(i=0; i< MAX_DMA_CHAN; i++)
-+    {  
-+      if((priv->lut[i].vpi == vpi))
-+      return i;
-+    }
-+  }
-+
-+  dprintf(4, "vpi=%d, vci=%d\n", vpi, vci);
-+  for(i=0; i< MAX_DMA_CHAN; i++)
-+  {  
-+    if((priv->lut[i].vpi == vpi) && (priv->lut[i].vci == vci))
-+      return i;
-+  }
-+
-+  
-+
-+  return ATM_NO_DMA_CHAN;
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int tn7atm_lut_clear(struct atm_vcc *vcc,int chan)
-+ *
-+ *  Description: find an TX DMA channel
-+ *               that matches a vpi/vci pair
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
-+static int
-+tn7atm_lut_clear(struct atm_vcc *vcc, int chan)
-+{
-+  Tn7AtmPrivate *priv;
-+  
-+  priv = (Tn7AtmPrivate *)vcc->dev->dev_data;
-+
-+  memset(&priv->lut[chan], 0, sizeof(priv->lut[chan]));
-+
-+  return 0;
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int tn7atm_walk_lut(void)
-+ *
-+ *  Description: find an available TX DMA channel
-+ *               and initialize LUT
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
-+static int 
-+tn7atm_walk_lut(Tn7AtmPrivate *priv)
-+{
-+  int i;
-+
-+  for(i=0; i< MAX_DMA_CHAN; i++){ 
-+    if(!priv->lut[i].inuse)
-+    {    
-+      return i;                            /* return available dma channel number */
-+    }
-+  }
-+  return ATM_NO_DMA_CHAN;       /* no tx dma channels available */
-+}
-+
-+static int 
-+tn7atm_set_lut(Tn7AtmPrivate *priv, struct atm_vcc *vcc, int chan)
-+{
-+  
-+  if(!priv->lut[chan].inuse)
-+  {
-+    priv->lut[chan].vpi = (int)vcc->vpi;
-+    priv->lut[chan].vci = vcc->vci;
-+    priv->lut[chan].chanid = chan;
-+    priv->lut[chan].inuse = 1;         /* claim the channel */
-+    priv->lut[chan].vcc = (void *)vcc;
-+    priv->lut[chan].bClosing = 0;
-+    priv->lut[chan].ready = 0;
-+    priv->lut[chan].tx_total_bufs = TX_BUFFER_NUM;
-+    priv->lut[chan].tx_used_bufs[0] = 0;
-+    priv->lut[chan].tx_used_bufs[1] = 0;
-+    return 0;
-+  }
-+  return -1;       /* no tx dma channels available */
-+}
-+
-+#if 0
-+static void tn7atm_free_packet(void *pVc, void *pDev, void *pPacket)
-+  {
-+  Tn7AtmPrivate *priv;
-+  struct atm_vcc *vcc;
-+  struct sk_buff *skb;
-+
-+  vcc = (struct atm_vcc *)pVc;
-+  priv = (Tn7AtmPrivate *)pDev;
-+  skb = (struct sk_buff *) pPacket;
-+
-+  if(vcc->pop)
-+    vcc->pop(vcc, skb);   
-+  else
-+    tn7atm_kfree_skb(skb);
-+  }
-+#endif
-+
-+static void str2eaddr(char *pMac, char *pStr)
-+{
-+  char tmp[3];
-+  int i;
-+
-+  for(i=0;i<6;i++)
-+  {
-+    tmp[0]=pStr[i*3];
-+    tmp[1]=pStr[i*3+1];
-+    tmp[2]=0;
-+    pMac[i]=os_atoh(tmp);
-+  }
-+}
-+
-+static int __init
-+tn7atm_get_ESI(struct atm_dev *dev)
-+{
-+  int  i;
-+  char  esi_addr[ESI_LEN]={0x00,0x00,0x11,0x22,0x33,0x44};
-+  char  *esiaddr_str = NULL;
-+
-+  esiaddr_str = prom_getenv("macc");
-+
-+  if (!esiaddr_str) {
-+    //printk("macc address not set in adam2 environment space\n");
-+    //printk("Using default macc address = 00:01:02:03:04:05\n");
-+    esiaddr_str = "00:00:02:03:04:05";
-+  }
-+  str2eaddr(esi_addr, esiaddr_str);
-+
-+  for(i=0; i < ESI_LEN; i++)
-+    dev->esi[i] = esi_addr[i];
-+
-+  return 0;
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int tn7atm_open(struct atm_vcc *vcc, short vpi, int vci)
-+ *
-+ *  Description: Device operation: open
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
-+//static int
-+int tn7atm_open (struct atm_vcc *vcc, short vpi, int vci)
-+{
-+  Tn7AtmPrivate *priv;
-+  int dmachan;
-+  int rc;
-+  int traffic_type;
-+  int pcr = 0x20000;
-+  int scr = 0x20000;
-+  int mbs = 0x20000;
-+  int cdvt = 10000;
-+  int err;
-+
-+  dprintf(1, "tn7atm_open()\n");
-+
-+  priv = (Tn7AtmPrivate *)vcc->dev->dev_data; 
-+  if(priv==NULL)
-+  {
-+    printk("null priv\n");
-+    return -1;
-+  }
-+
-+  MOD_INC_USE_COUNT;
-+
-+#if 0 /* by nbd */
-+  /* find a free VPI/VCI */
-+  tn7atm_walk_vccs(vcc, &vpi, &vci);
-+#else
-+  if ((err = atm_find_ci(vcc, &vpi, &vci))) {
-+    printk("atm_find_ci err = %d\n", err);
-+    return err;
-+  }
-+  
-+#endif
-+        
-+  vcc->vpi = vpi;
-+  vcc->vci = vci;
-+
-+  if (vci == ATM_VCI_UNSPEC || vpi == ATM_VCI_UNSPEC)
-+  {
-+    MOD_DEC_USE_COUNT;
-+    return -EBUSY;
-+  }
-+  
-+  /* check to see whether PVC is opened or not */
-+  if((dmachan = tn7atm_lut_find(vcc->vpi, vcc->vci)) != ATM_NO_DMA_CHAN) 
-+  {
-+    MOD_DEC_USE_COUNT;  
-+    printk("PVC already opened. dmachan = %d\n", dmachan);
-+    return -EBUSY;
-+  }
-+  /*check for available channel */
-+  if((dmachan = tn7atm_walk_lut(priv)) == ATM_NO_DMA_CHAN)
-+  {
-+    printk("No TX DMA channels available\n");
-+    return -EBUSY;
-+  }
-+
-+  set_bit(ATM_VF_ADDR, &vcc->flags);  /* claim address    */
-+        
-+  vcc->itf = vcc->dev->number;        /* interface number */
-+
-+  switch(vcc->qos.txtp.traffic_class)
-+  {
-+    case ATM_CBR: /* Constant Bit Rate */
-+      traffic_type = 0;
-+      pcr = vcc->qos.txtp.pcr;
-+      scr = vcc->qos.txtp.pcr;
-+      cdvt = vcc->qos.txtp.max_cdv;
-+      printk("cdvt=%d\n", cdvt);
-+      break;
-+    case ATM_UBR: /* Unspecified Bit Rate */
-+      traffic_type = 2;
-+      break;
-+
-+	/* Disable ATM_VBR until pppd ppoatm plugin supports it.
-+         * NOTE: Support ATM_VBR requires the addition of a scr
-+         * field to the atm_trafprm structure which will cause
-+	 * a change in the SO_ATMQOS ioctl. Make sure that the
-+	 * revised header file becomes visible to the pppd
-+	 * pppoatm plugin source, or the SO_ATMQOS ioctl will fail.
-+	 */
-+#if 0
-+    case ATM_VBR: /* Variable Bit Rate */
-+      traffic_type = 1;
-+      pcr = vcc->qos.txtp.pcr;
-+      scr = vcc->qos.txtp.scr;
-+      if(vcc->qos.txtp.max_pcr >= 0)
-+        mbs = vcc->qos.txtp.max_pcr;
-+      cdvt = vcc->qos.txtp.max_cdv;
-+      printk("cdvt=%d\n", cdvt);
-+      printk("mbs=%d\n", mbs);
-+      break;
-+#endif
-+    default:
-+        traffic_type = 2;
-+  }
-+
-+  dprintf(4, "vpi=%d, vci=%d, pcr=%d, dmachan=%d, qos=%d\n", vpi,vci,pcr,dmachan,traffic_type);
-+  /* Activate SAR channel */
-+  rc = tn7sar_activate_vc(priv, vpi, vci, pcr, scr, mbs, cdvt, dmachan, traffic_type);
-+  if(rc < 0)
-+  {
-+    
-+    MOD_DEC_USE_COUNT;
-+    return -EBUSY;
-+  }
-+  
-+  /* insure that the the vcc struct points to the correct entry
-+       in the lookup table */
-+
-+  tn7atm_set_lut(priv,vcc, dmachan);
-+  vcc->dev_data = (void *)&priv->lut[dmachan];
-+  set_bit(ATM_VF_READY, &vcc->flags);
-+
-+  mdelay(100);
-+  priv->lut[dmachan].ready = 1;
-+  dprintf (1, "Leave tn7atm_open\n"); 
-+  return 0;     
-+}
-+
-+
-+//static void
-+void tn7atm_close (struct atm_vcc *vcc)
-+{
-+  Tn7AtmPrivate *priv;
-+  int dmachan;
-+
-+  priv = (Tn7AtmPrivate *)vcc->dev->dev_data;
-+  dprintf(4, "closing %d.%d.%d.%d\n", vcc->itf, vcc->vpi, vcc->vci, vcc->qos.aal);
-+ 
-+  clear_bit(ATM_VF_READY, &vcc->flags);  /* ATM_VF_READY: channel is ready to transfer data */
-+
-+  dmachan = tn7atm_lut_find(vcc->vpi, vcc->vci);
-+  printk("closing channel: %d\n", dmachan);
-+  if(dmachan == ATM_NO_DMA_CHAN)
-+  {
-+    printk("Closing channel not found.\n");
-+    return;
-+  }
-+  priv->lut[dmachan].bClosing = 1;
-+  priv->lut[dmachan].ready = 0;
-+  if(tn7sar_deactivate_vc(priv,dmachan))  /* tear down channel */
-+  {
-+    printk("failed to close channel %d.\n", dmachan);
-+  }
-+
-+  clear_bit(ATM_VF_READY, &vcc->flags);  /* ATM_VF_READY: channel is ready to transfer data */
-+  tn7atm_lut_clear(vcc, dmachan);
-+
-+  MOD_DEC_USE_COUNT;
-+
-+  dprintf (1, "Leave tn7atm_close\n");
-+}
-+
-+#define ATM_TXSTOP 0x800c61f4 
-+static int
-+tn7atm_ioctl (struct atm_dev *dev, unsigned int cmd, void *arg)
-+{
-+  Tn7AtmPrivate *priv;
-+  priv = (Tn7AtmPrivate *) dev->dev_data;
-+  
-+    //printk("tn7atm_ioctl\n");
-+    //printk("arg = %x\n", *(int *)arg);
-+    //printk("cmd =%x\n", cmd);
-+    switch(cmd)
-+    {
-+
-+      case ATM_TXSTOP: /*temp fix for SAR tear down problem */
-+//        printk("ioctl cmd = 0x%x (%u), arg = 0x%p (%lu)\n", cmd, cmd, arg, (unsigned long)arg);
-+//        printk("arg = %d\n", *(int*)arg);
-+        priv->xmitStop = *(int *)arg;
-+        //printk("Executing ATM_SETLOOP for tn7 \n");
-+        //printk("Stop variable = :%d: \n",priv->xmitStop);
-+        return 0;
-+
-+      //case SAR_DSL_RESET_SOFTBOOT:
-+      //  return tn7atm_dsl_clean_reboot();
-+    case 0:
-+        return 0;
-+    }
-+    
-+    return -ENOSYS;
-+  
-+}
-+
-+static int
-+tn7atm_change_qos (struct atm_vcc *vcc, struct atm_qos *qos,int flags)
-+{
-+  dprintf (1, "Enter tn7atm_change_qos\n");
-+  dprintf (1, "Leave tn7atm_change_qos\n");
-+  return 0;
-+}
-+
-+
-+int tn7atm_send (struct atm_vcc *vcc, struct sk_buff *skb)
-+{
-+  
-+  Tn7AtmPrivate *priv;
-+  int bret;
-+  int chan;
-+  
-+  dprintf(4, "tn7atm_send()\n");
-+  
-+  priv = (Tn7AtmPrivate*)vcc->dev->dev_data;
-+
-+  //if(skb->len < 64)
-+    //xdump((unsigned char *)skb->data, skb->len, 1);
-+  //else
-+    //xdump((unsigned char *)skb->data, 64, 1);
-+  /* check for dsl line connection */
-+
-+  /* add vcc field in skb for clip inATMARP fix */
-+  ATM_SKB(skb)->vcc = vcc;
-+	/* Ron change 2.3 -> 2.4 ??*/
-+  //if(priv->lConnected != 1 || priv->xmitStop == 1)
-+  if(priv->lConnected != 1 && priv->xmitStop == 1)
-+  {
-+    dprintf(4,"dsl line down\n");
-+    if(vcc->pop)
-+      vcc->pop(vcc, skb);   
-+    else
-+     tn7atm_kfree_skb(skb);
-+    return 1;
-+  }
-+  
-+  /* check whether PVC is closing */
-+  chan = tn7atm_lut_find(vcc->vpi, vcc->vci);
-+  /* set br2684 dev pointer */
-+  priv->lut[chan].net_device = skb->dev;
-+  if(chan == ATM_NO_DMA_CHAN || priv->lut[chan].bClosing == 1)
-+  {
-+    dprintf(4, "can find sar channel\n");
-+    if(vcc->pop)
-+      vcc->pop(vcc, skb);   
-+    else
-+     tn7atm_kfree_skb(skb);
-+    return 1;
-+  }
-+
-+  bret=tn7atm_queue_packet_to_sar(vcc, skb);
-+
-+  return bret;
-+}
-+
-+
-+static int tn7atm_queue_packet_to_sar(void *vcc1, void *skb1)
-+{
-+  struct atm_vcc *vcc;
-+  struct sk_buff *skb;
-+  int priority = 1;
-+  Tn7AtmPrivate *priv;
-+  int dmachan;
-+
-+  vcc = (struct atm_vcc *)vcc1;
-+  skb = (struct sk_buff *)skb1;
-+
-+  priv = (Tn7AtmPrivate*)vcc->dev->dev_data;
-+
-+  dprintf(4, "vcc->vci=%d\n", vcc->vci);
-+  dmachan = tn7atm_lut_find(vcc->vpi, vcc->vci);
-+  if(dmachan == ATM_NO_DMA_CHAN)
-+  {
-+    dprintf(4, "can find sar channel\n");
-+    if(vcc->pop)
-+      vcc->pop(vcc, skb);   
-+    else
-+     tn7atm_kfree_skb(skb);
-+    return 1;
-+  }
-+
-+  // turbo dsl TCP ack check
-+  if(priv->bTurboDsl)
-+    priority = turbodsl_check_priority_type(skb->data);
-+
-+  //skb priority check
-+  if(priority != 0)
-+  {
-+    if((skb->cb[47])>>1)
-+      priority=1;
-+    else
-+      priority = 0;
-+  }
-+  
-+  /* add queue info here */
-+  skb->cb[47] = (char)priority;
-+  spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+  priv->lut[dmachan].tx_used_bufs[priority]++;
-+  spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+
-+  if(tn7sar_send_packet(priv,dmachan, skb, skb->data, skb->len, priority) != 0)
-+  {
-+    dprintf(1, "failed to send packet\n");
-+    if(vcc->pop)
-+      vcc->pop(vcc, skb);   
-+    else
-+     tn7atm_kfree_skb(skb);
-+
-+    spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+    priv->lut[dmachan].tx_used_bufs[priority]--;
-+    spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+    return 1;
-+  }
-+  
-+  /* check for whether tx queue is full or not */
-+  //printk("bufs used = %d\n", priv->lut[dmachan].tx_used_bufs[1]);
-+  spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+  if(priv->lut[dmachan].tx_used_bufs[1] >= (priv->lut[dmachan].tx_total_bufs - STOP_EMPTY_BUFF) ||
-+      priv->lut[dmachan].tx_used_bufs[0] >= (priv->lut[dmachan].tx_total_bufs - STOP_EMPTY_BUFF))
-+  {
-+    //printk("net queue stoped\n");
-+    netif_stop_queue(priv->lut[dmachan].net_device);
-+    priv->lut[dmachan].netqueue_stop = 1;
-+  }
-+  spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+
-+  return 0;
-+}
-+
-+/* functions needed by SAR HAL */
-+
-+int tn7atm_send_complete(void *osSendInfo)
-+{
-+  Tn7AtmPrivate *priv;
-+  //struct atm_dev *dev;
-+  struct sk_buff *skb;
-+  struct atm_vcc *vcc;
-+  int chan;
-+
-+  dprintf(4, "tn7atm_send_complete()\n");
-+
-+
-+  skb = (struct sk_buff *)osSendInfo;
-+  //dev = (struct atm_dev *) (skb->dev);
-+  priv = (Tn7AtmPrivate *)mydev->dev_data;
-+  vcc =ATM_SKB(skb)->vcc;
-+  if(vcc)
-+  {
-+    dprintf(4, "vcc->vci=%d\n",vcc->vci );
-+    chan = tn7atm_lut_find(vcc->vpi, vcc->vci);
-+    if(chan==ATM_NO_DMA_CHAN)
-+      return 1;
-+
-+    /*decreament packet queued number */
-+    spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+    priv->lut[chan].tx_used_bufs[(int)skb->cb[47]] --;
-+    if(priv->lut[chan].tx_used_bufs[1] < priv->lut[chan].tx_total_bufs - START_EMPTY_BUFF &&
-+       priv->lut[chan].tx_used_bufs[0] < priv->lut[chan].tx_total_bufs - START_EMPTY_BUFF)
-+    {
-+      if(priv->lut[chan].netqueue_stop)
-+      {
-+        //printk("net queue restarted\n");
-+        netif_wake_queue(priv->lut[chan].net_device);
-+        priv->lut[chan].netqueue_stop = 0;
-+      }
-+    }
-+    spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+
-+    if(vcc->pop)
-+    {
-+      dprintf(5, "free packet\n");
-+      vcc->pop(vcc, skb);
-+    }
-+
-+    
-+  }
-+    
-+  
-+
-+  /* Update Stats: There may be a better place to do this, but this is a start */
-+  priv->stats.tx_packets++;
-+#ifdef CONFIG_LED_MODULE
-+//    led_operation(MOD_ADSL, DEF_ADSL_ACTIVITY);           
-+#endif
-+
-+  /* track number of buffer used */
-+  
-+  dprintf(4, "tn7atm_send_complete() done\n");
-+
-+  return 0;
-+}
-+
-+void *tn7atm_allocate_rx_skb(void *os_dev, void **os_receive_info, unsigned int size)
-+{
-+  struct sk_buff *skb;
-+  dprintf(4, "tn7atm_allocate_rx_skb size=%d\n", size);
-+  size = ((size+3)&0xfffffffc);
-+  skb = dev_alloc_skb(size);
-+  if(skb==NULL)
-+  {
-+    //printk("rx allocate skb failed\n");
-+    return NULL;
-+  }
-+  *os_receive_info = (void *)skb;
-+  return (skb->data);
-+}
-+
-+void tn7atm_free_rx_skb(void *skb)
-+{
-+  dprintf(4, "tn7atm_free_rx_skb\n");
-+  tn7atm_kfree_skb((struct sk_buff *)skb);
-+}
-+
-+
-+int tn7atm_receive(void *os_dev, int ch, unsigned int packet_size, void *os_receive_info, void *data)
-+{
-+  Tn7AtmPrivate *priv;
-+  struct atm_dev *dev;
-+  struct sk_buff *skb;
-+  struct atm_vcc *vcc;
-+  
-+
-+  dprintf(4, "tn7atm_receive()\n");
-+  dev = (struct atm_dev *)os_dev;
-+
-+  priv = (Tn7AtmPrivate *)dev->dev_data;
-+
-+  if(priv->lConnected != 1 || priv->lut[ch].ready == 0)
-+  {
-+    //printk("channel not ready\n");
-+    return 1;
-+  }
-+
-+  vcc = (struct atm_vcc *)priv->lut[ch].vcc;
-+  if(vcc == NULL)
-+  {
-+    printk("vcc=Null");
-+    return 1;
-+  }
-+
-+
-+  /* assume no fragment packet for now */
-+  skb = (struct sk_buff *)os_receive_info;
-+  
-+  if(skb==NULL)
-+  {
-+    dprintf(1, "received empty skb.\n");
-+    return 1;
-+  }
-+  /* see skbuff->cb definition in include/linux/skbuff.h */
-+  ATM_SKB(skb)->vcc = vcc;
-+
-+  skb->len = packet_size;
-+  dprintf(3, "skb:[0x%p]:0x%x pdu_len: 0x%04x\n",skb,skb->len,packet_size);
-+  dprintf(3, "data location: 0x%x, 0x%x\n", (unsigned int)skb->data, (unsigned int)data);
-+  
-+  /*skb_trim(skb,skb->len); */   /* skb size is incorrect for large packets > 1428 bytes ?? */
-+  __skb_trim(skb,skb->len); /* change to correct > 1500 ping when firewall is on */
-+
-+  dprintf(3, "pushing the skb...\n");
-+  skb->stamp = xtime;
-+
-+  xdump((unsigned char *)skb->data, skb->len, 5);
-+  
-+  if(atm_charge(vcc, skb->truesize) == 0)
-+  {
-+    dprintf(1,"Receive buffers saturated for %d.%d.%d - PDU dropped\n", vcc->itf, vcc->vci, vcc->vpi);
-+    return 1;
-+  }
-+
-+  /*pass it up to kernel networking layer and update stats*/
-+  vcc->push(vcc,skb);
-+
-+  /* Update receive packet stats */
-+  priv->stats.rx_packets++;
-+  atomic_inc(&vcc->stats->rx);
-+
-+#ifdef CONFIG_LED_MODULE
-+//    led_operation(MOD_ADSL, DEF_ADSL_ACTIVITY);           
-+#endif
-+  dprintf(3, "(a) Receiving:vpi/vci[%d/%d] chan_id: %d  skb len:0x%x  skb truesize:0x%x\n",
-+                vcc->vpi,vcc->vci,ch,skb->len, skb->truesize);
-+  
-+  return 0;
-+}
-+
-+static int
-+tn7atm_proc_channels(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+  int len = 0;
-+  int limit = count - 80;
-+  int i;
-+
-+  struct atm_dev *dev;
-+  Tn7AtmPrivate *priv;
-+
-+  dev = (struct atm_dev *)data;
-+  priv = (Tn7AtmPrivate *)dev->dev_data;
-+
-+  if(len<=limit)
-+      len += sprintf(buf+len,"Chan  Inuse   ChanID   VPI     VCI \n");
-+  if(len<=limit)
-+      len += sprintf(buf+len,"------------------------------------------------------------------\n");
-+
-+  for(i=0; i < MAX_DMA_CHAN; i++)
-+    {
-+      if(len<=limit)
-+        {
-+          len += sprintf(buf+len, 
-+                        " %02d    %05d   %05d   %05d   %05d \n",
-+                        i,priv->lut[i].inuse,priv->lut[i].chanid,
-+                        priv->lut[i].vpi,priv->lut[i].vci);
-+        }
-+    }
-+
-+  return len;
-+}
-+
-+static int
-+tn7atm_proc_private(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+  int len = 0;
-+  int limit = count - 80;
-+  struct atm_dev *dev;
-+  Tn7AtmPrivate *priv;
-+
-+  dev = (struct atm_dev *)data;
-+  priv = (Tn7AtmPrivate *)dev->dev_data;
-+  
-+  if(len<=limit)
-+      len += sprintf(buf+len, "\nPrivate Data Structure(%s):\n",priv->name);
-+  if(len<=limit)
-+      len += sprintf(buf+len, "----------------------------------------\n");
-+  if(len<=limit)
-+      len += sprintf(buf+len, "priv:  0x%p\n",priv);
-+  if(len<=limit)
-+      len += sprintf(buf+len, "next:  0x%p",priv->next);
-+  if(len<=limit)
-+        len += sprintf(buf+len, "\tdev:   0x%p\n",priv->dev);
-+ 
-+  if(len<=limit)
-+      len += sprintf(buf+len, "tx_irq: %02d",priv->sar_irq);
-+  if(len<=limit)
-+      len += sprintf(buf+len, "rx_irq: %02d",priv->dsl_irq);
-+  
-+
-+  return len;
-+}
-+
-+void tn7atm_sarhal_isr_register(void *os_dev, void *hal_isr, int interrupt_num)
-+{
-+  struct atm_dev *dev;
-+  Tn7AtmPrivate *priv;
-+
-+  dprintf(4, "tn7atm_sarhal_isr_register()\n");
-+
-+  dev = (struct atm_dev *)os_dev;
-+  priv = (Tn7AtmPrivate *)dev->dev_data;
-+  priv->halIsr = (void *)hal_isr;
-+  priv->int_num = interrupt_num;
-+}
-+
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int tn7atm_exit(void)
-+ *
-+ *  Description: Avalanche SAR exit function
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+
-+static void
-+tn7atm_exit (void)
-+{
-+
-+  struct atm_dev        *dev;
-+
-+  Tn7AtmPrivate *priv;
-+
-+  dprintf(4, "tn7atm_exit()\n");
-+
-+  dev=mydev;
-+  priv = (Tn7AtmPrivate *)dev->dev_data;
-+  priv->lConnected = 0;
-+  tn7dsl_exit();
-+
-+  tn7sar_exit(dev, priv);
-+
-+  /* freeup irq's */
-+  free_irq(priv->dsl_irq,priv->dev);
-+  free_irq(priv->sar_irq,priv->dev);
-+  
-+  kfree (dev->dev_data);
-+
-+  //    atm_dev_deregister (dev);
-+  shutdown_atm_dev(dev);
-+
-+  /* remove proc entries */
-+  remove_proc_entry("tiatm/avsar_ver",NULL);
-+  remove_proc_entry("tiatm/avsar_modem_stats",NULL);
-+  remove_proc_entry("tiatm/avsar_modem_training",NULL);
-+  remove_proc_entry("tiatm/avsar_channels",NULL);
-+  remove_proc_entry("tiatm/avsar_private",NULL);
-+  remove_proc_entry("tiatm/avsar_sarhal_stats",NULL);
-+  remove_proc_entry("tiatm/avsar_oam_ping",NULL);
-+  remove_proc_entry("tiatm/avsar_pvc_table",NULL);
-+  remove_proc_entry("tiatm",NULL);
-+  tn7dsl_dslmod_sysctl_unregister();
-+  
-+  printk ("Module Removed\n");
-+
-+}
-+
-+
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int tn7atm_registration(struct tn7* tn7)
-+ *
-+ *  Description: ATM driver registration
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+
-+static int __init
-+tn7atm_register (Tn7AtmPrivate * priv)
-+{
-+  /* allocate memory for the device */
-+
-+  dprintf(4,"device %s being registered\n", priv->name);
-+
-+  mydev = atm_dev_register (priv->proc_name, &tn7atm_ops, -1, NULL);
-+
-+  if (mydev == NULL)
-+    {
-+      printk ("atm_dev_register returning NULL\n");     
-+      return ATM_REG_FAILED;
-+    }
-+
-+  printk ("registered device %s\n", priv->name);
-+
-+  mydev->dev_data = priv;       /* setup device data in atm_dev struct */
-+  priv->dev = mydev;    /* setup atm_device in avalanche sar struct */
-+
-+  mydev->ci_range.vpi_bits = ATM_CI_MAX;        /* atm supports 11 bits */
-+  mydev->ci_range.vci_bits = 16;        /* atm VCI max = 16 bits */
-+
-+  
-+  return ATM_REG_OK;
-+}
-+
-+static int 
-+tn7atm_proc_version(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+  int len = 0;
-+  char dslVer[8];
-+  char dspVer[10];
-+  char *pSarVer;
-+  Tn7AtmPrivate *priv;
-+  int i;
-+  unsigned int pdspV1, pdspV2;
-+
-+  priv = mydev->dev_data;
-+
-+  len += sprintf(buf+len, "ATM Driver version:[%d.%02d.%02d.%02d]\n",LINUXATM_VERSION_MAJOR, LINUXATM_VERSION_MINOR,
-+                                                                   LINUXATM_VERSION_BUGFIX, LINUXATM_VERSION_BUILDNUM);
-+
-+  tn7dsl_get_dslhal_version(dslVer);
-+
-+  len += sprintf(buf+len, "DSL HAL version: [%d.%02d.%02d.%02d]\n", dslVer[0], dslVer[1], dslVer[2],
-+                                            dslVer[3]);
-+  tn7dsl_get_dsp_version(dspVer);
-+
-+  len += sprintf(buf+len, "DSP Datapump version: [%d.%02d.%02d.%02d] ", dspVer[4], dspVer[5], dspVer[6],
-+                                            dspVer[7]);
-+  if(dspVer[8]==2) // annex B
-+    len += sprintf(buf+len, "Annex B\n");
-+  else if(dspVer[8]==3) //annex c
-+    len += sprintf(buf+len, "Annex c\n");
-+  else
-+    len += sprintf(buf+len, "Annex A\n");
-+
-+  tn7sar_get_sar_version(priv, &pSarVer);
-+
-+  len += sprintf(buf+len, "SAR HAL version: [");
-+  for(i=0;i<8;i++)
-+  {
-+    len += sprintf(buf+len, "%c", pSarVer[i+7]);
-+  }
-+  len += sprintf(buf+len, "]\n");
-+
-+  tn7sar_get_sar_firmware_version(&pdspV1, &pdspV2);
-+  len += sprintf(buf+len, "PDSP Firmware version:[%01x.%02x]\n",
-+                 pdspV1,pdspV2);
-+
-+  return len;
-+}
-+
-+/*
-+static struct net_device_stats
-+*tn7atm_get_stats(struct atm_dev *dev)
-+{
-+  Tn7AtmPrivate *priv;
-+  //unsigned long flags;
-+
-+  //spin_lock_irqsave(&priv->stats_lock,flags);
-+  priv= (Tn7AtmPrivate *)dev->dev_data;
-+  //spin_unlock_irqrestore(&priv->stats_lock,flags);
-+  
-+  return &priv->stats;
-+  
-+}
-+*/
-+/* Device detection */
-+
-+static int __init
-+tn7atm_detect (void)
-+{
-+  Tn7AtmPrivate *priv;
-+  //static struct proc_dir_entry *proc_dir;
-+
-+  dprintf(4, "tn7atm_detect().\n");
-+  /* Device allocated as a global static structure at top of code "mydev" */
-+
-+  /* Alloc priv struct */
-+  priv=kmalloc(sizeof(Tn7AtmPrivate),GFP_KERNEL);
-+  if(!priv)
-+    {
-+      printk("unable to kmalloc priv structure. Killing autoprobe.\n");
-+      return -ENODEV;
-+    }
-+  memset(priv, 0, sizeof(Tn7AtmPrivate));
-+#ifdef COMMON_NSP
-+  priv->name = "TI Avalanche SAR";
-+  priv->proc_name = "avsar";
-+#else
-+  priv->name = "TI tnetd73xx ATM Driver";
-+  priv->proc_name = "tn7";
-+#endif
-+
-+  if ((tn7atm_register (priv)) == ATM_REG_FAILED)
-+    return -ENODEV;
-+
-+  tn7atm_init(mydev);
-+
-+  /* Set up proc entry for atm stats */
-+  proc_mkdir("tiatm", NULL);
-+  create_proc_read_entry("tiatm/avsar_modem_stats",0,NULL,tn7dsl_proc_stats,NULL);
-+  create_proc_read_entry("tiatm/avsar_modem_training",0,NULL,tn7dsl_proc_modem,NULL);
-+  create_proc_read_entry("tiatm/avsar_ver",0,NULL,tn7atm_proc_version,NULL);
-+  create_proc_read_entry("tiatm/avsar_channels",0,NULL,tn7atm_proc_channels,mydev);
-+  create_proc_read_entry("tiatm/avsar_private",0,NULL,tn7atm_proc_private,mydev);
-+  create_proc_read_entry("tiatm/avsar_sarhal_stats",0,NULL,tn7sar_proc_sar_stat,mydev);
-+  create_proc_read_entry("tiatm/avsar_oam_ping",0,NULL,tn7sar_proc_oam_ping,mydev);
-+  create_proc_read_entry("tiatm/avsar_pvc_table",0,NULL,tn7sar_proc_pvc_table,mydev);
-+
-+  tn7dsl_dslmod_sysctl_register();
-+
-+  printk("Texas Instruments ATM driver: version:[%d.%02d.%02d.%02d]\n",LINUXATM_VERSION_MAJOR, LINUXATM_VERSION_MINOR,
-+                                                                   LINUXATM_VERSION_BUGFIX, LINUXATM_VERSION_BUILDNUM);
-+  return 0;
-+}
-+
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int tn7atm_probe(void)
-+ *
-+ *  Description: Avalanche SAR driver probe (see net/atm/pvc.c)
-+ *               this is utilized when the SAR driver is built
-+ *               into the kernel and needs to be configured.
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+int __init tn7atm_probe(void)
-+{
-+  tn7atm_detect();
-+  return -ENODEV;
-+}
-+
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int tn7atm_init(struct atm_dev *dev)
-+ *
-+ *  Description: Device Initialization
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+static int __init
-+tn7atm_init(struct atm_dev *dev)
-+{
-+  Tn7AtmPrivate *priv;
-+  char *ptr;
-+
-+  dprintf(4, "tn7atm_init()\n");
-+
-+  priv = (Tn7AtmPrivate *)dev->dev_data;
-+
-+  if(tn7sar_init(dev, priv) != 0)
-+  {
-+    printk("Failed to init SAR.\n");
-+    return -ENODEV;
-+  }
-+
-+  if(tn7dsl_init(priv) < 0)
-+  {
-+    printk("Failed to init DSL.\n");
-+    return -ENODEV;
-+  }
-+  
-+  if(tn7atm_get_ESI(dev) < 0)                 /* set ESI */  
-+    return -ENODEV;
-+
-+  if(tn7atm_irq_request(dev) < 0)     
-+    return -EBUSY;
-+
-+  priv->bTurboDsl = 1;
-+  // read config for turbo dsl
-+  ptr = prom_getenv("TurboDSL");
-+  if(ptr)
-+  {
-+    priv->bTurboDsl = os_atoi(ptr);
-+  }
-+
-+  return 0;
-+}
-+
-+int tn7atm_device_connect_status(void *priv, int state)
-+{
-+  Tn7AtmPrivate *priv1;
-+
-+  dprintf(5, "tn7atm_device_connect_status()\n");
-+  priv1 = (Tn7AtmPrivate *)priv;
-+
-+  priv1->lConnected = state;
-+  dprintf(5, "priv1->lConnected=%d\n", priv1->lConnected);
-+  return 0;
-+}
-+
-+
-+#ifdef MODULE
-+module_init (tn7atm_detect);
-+module_exit (tn7atm_exit);
-+#endif /* MODULE */
-diff -urN linux.old/drivers/atm/sangam_atm/tn7atm.h linux.dev/drivers/atm/sangam_atm/tn7atm.h
---- linux.old/drivers/atm/sangam_atm/tn7atm.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/tn7atm.h	2005-08-23 04:46:50.107842176 +0200
-@@ -0,0 +1,115 @@
-+/* 
-+ *    Tnetd73xx ATM driver.
-+ *    by Zhicheng Tang, ztang@ti.com
-+ *    2000 (c) Texas Instruments Inc.
-+ *
-+ *
-+*/
-+
-+#ifndef __TN7ATM_H
-+#define __TN7ATM_H
-+
-+//#include  "mips_support.h"
-+#include  <linux/list.h>
-+
-+#define ATM_REG_OK 1
-+#define ATM_REG_FAILED 0
-+
-+#define TX_SERVICE_MAX    32
-+#define RX_SERVICE_MAX    20
-+#define TX_BUFFER_NUM     64
-+#define RX_BUFFER_NUM     28
-+#define TX_QUEUE_NUM      2
-+#define RX_BUFFER_SIZE    1582
-+
-+#define TX_DMA_CHAN       16    /* number of tx dma channels available */
-+#define MAX_DMA_CHAN      16
-+#define ATM_NO_DMA_CHAN   MAX_DMA_CHAN + 1  /* no tx dma channels available */
-+#define ATM_SAR_INT       15
-+#define ATM_SAR_INT_PACING_BLOCK_NUM 2
-+#define ATM_DSL_INT       39
-+
-+#define CONFIG_ATM_TN7ATM_DEBUG 0 /* Debug level (0=no mtn7s 5=verbose) */
-+
-+#define TN7ATM_DEV(d)          ((struct tn7atm*)((d)->dev_data))
-+
-+
-+/* Avalanche SAR state information */
-+
-+typedef enum tn7atm_state 
-+{
-+  TN7ATM_STATE_REGISTER             /* device registered */
-+}tn7atm_state;
-+
-+typedef struct _sar_stat
-+{
-+  unsigned int txErrors;
-+  unsigned int rxErrors;
-+  unsigned int rxPktCnt;
-+  unsigned int txPktCnt;
-+  unsigned int rxBytes;
-+  unsigned int txBytes;
-+}sar_stat_t;
-+
-+/* Host based look up table to xref Channel Id's, VPI/VCI, LC, CID, packet type */
-+typedef struct _tn7atm_tx_lut
-+{
-+  int         inuse;       /* is DMA channel available (1=y)  */
-+  int         chanid;      /*  DMA channel ID   (0-0x1f) This corresponds to the Channel ID
-+                              that is used in the connection config reg (TN7ATM_CONN_CONFIG) */
-+  int         vpi;         /* Virtual path identifier         */
-+  int         vci;         /* Virtual channel identifier      */
-+  void        *vcc;
-+  int         bClosing;
-+  int         ready;
-+  void        *net_device;
-+  int         tx_total_bufs;
-+  int         tx_used_bufs[2];
-+  int         netqueue_stop;
-+}tn7atm_lut_t;              
-+
-+/* per device data */
-+
-+typedef struct _tn7atm_private
-+{
-+  struct _tn7atm_private       *next;               /* next device */
-+  struct atm_dev              *dev;                /* ATM device */
-+  struct net_device_stats     stats;         /* Used to report Tx/Rx frames from ifconfig */
-+  tn7atm_lut_t                 lut[MAX_DMA_CHAN];  /* Tx DMA look up table (LUT) */
-+  int                         dsl_irq;            /* ATM SAR TransmitA interrupt number */
-+  int                         sar_irq;            /* ATM SAR ReceiveA interrupt number */
-+  char*                       name;                /* device name */
-+  char*                       proc_name;           /* board name under /proc/atm */
-+  unsigned int                available_cell_rate; /* cell rate */
-+  unsigned int                connection_cell_rate; /* cell rate */
-+  int                         lConnected;
-+
-+  /* Tnetd73xx CPHAL */
-+  void                        *pSarHalDev;
-+  void                        *pSarHalFunc;
-+  void                        *pSarOsFunc;
-+  void                        *halIsr;
-+  int                         int_num;
-+
-+  /* turbo dsl */
-+  int                          bTurboDsl;
-+
-+  /* spin lock for netifqueue */
-+  spinlock_t                   netifqueueLock;
-+  int                          netifqueueLockFlag;
-+  int                          xmitStop; /* temp fix for SAR problem */
-+}tn7atm_private_t, Tn7AtmPrivate;
-+
-+
-+
-+/* ATM adaptation layer id */
-+typedef enum tn7atm_aal {
-+    TN7ATM_AAL0  = 0,
-+    TN7ATM_AAL2  = 2,
-+    TN7ATM_AAL5  = 5,
-+} tn7atm_aal_t;
-+
-+
-+
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/tn7dsl.c linux.dev/drivers/atm/sangam_atm/tn7dsl.c
---- linux.old/drivers/atm/sangam_atm/tn7dsl.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/tn7dsl.c	2005-08-23 04:46:50.109841872 +0200
-@@ -0,0 +1,1780 @@
-+/* 
-+ *  $Id$
-+ *
-+ *   Avalanche SAR driver
-+ *
-+ *   Zhicheng Tang, ztang@ti.com
-+ *   2000 (c) Texas Instruments Inc.
-+ *
-+ *
-+*/
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/atmdev.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+#include <linux/smp_lock.h>
-+#include <asm/io.h>
-+#include <asm/mips-boards/prom.h>
-+#include <linux/proc_fs.h>
-+#include <linux/string.h>
-+#include <linux/ctype.h>
-+#include <linux/sysctl.h>
-+#include <linux/timer.h>
-+#include <linux/vmalloc.h>
-+#include <linux/file.h>
-+#include <asm/uaccess.h>
-+
-+#include "tn7atm.h"
-+#include "tn7api.h"
-+#include "dsl_hal_api.h"
-+
-+#ifdef CONFIG_LED_MODULE
-+#include <asm/ar7/ledapp.h>
-+#define MOD_ADSL 1
-+#define DEF_ADSL_IDLE     1
-+#define DEF_ADSL_TRAINING 2
-+#define DEF_ADSL_SYNC     3
-+#define DEF_ADSL_ACTIVITY 4
-+
-+#define LED_NUM_1 3
-+#define LED_NUM_2 4
-+
-+led_reg_t ledreg[2];
-+
-+static int led_on;
-+#endif
-+
-+extern int  __guDbgLevel;
-+extern sar_stat_t sarStat;
-+static int dslInSync = 0;
-+static int bMarginThConfig;
-+static int bMarginRetrainEnable;
-+static char EOCVendorID[8]= {0xb5, 0x00, 0x54, 0x53, 0x54, 0x43, 0x00, 0x00};
-+
-+#define TC_SYNC          1
-+#define SYNC_TIME_DELAY  500000
-+
-+
-+#define DEV_DSLMOD       1
-+#define MAX_STR_SIZE     256
-+#define DSL_MOD_SIZE     256
-+
-+#define TRUE   1
-+#define FALSE  0
-+
-+
-+enum
-+{
-+  NO_MODE,
-+  MULTI_MODE,
-+  T1413_MODE,
-+  GDMT_MODE,
-+  GLITE_MODE
-+};
-+
-+
-+
-+/* a structure to store all information we need
-+   for our thread */
-+typedef struct kthread_struct
-+{
-+  /* private data */
-+
-+  /* Linux task structure of thread */
-+  struct task_struct *thread;
-+  /* Task queue need to launch thread */
-+  struct tq_struct tq;
-+  /* function to be started as thread */
-+  void (*function) (struct kthread_struct *kthread);
-+  /* semaphore needed on start and creation of thread. */
-+  struct semaphore startstop_sem;
-+
-+  /* public data */
-+
-+  /* queue thread is waiting on. Gets initialized by
-+  init_kthread, can be used by thread itself.
-+  */
-+  wait_queue_head_t queue;
-+  /* flag to tell thread whether to die or not.
-+    When the thread receives a signal, it must check
-+    the value of terminate and call exit_kthread and terminate
-+    if set.
-+  */
-+  int terminate;
-+  /* additional data to pass to kernel thread */
-+  void *arg;
-+} kthread_t;
-+
-+#ifndef ADIAG
-+#define DSP_FIRMWARE_PATH "/lib/modules/ar0700xx.bin"
-+#else
-+#define DSP_FIRMWARE_PATH "/var/tmp/ar0700xx_diag.bin"
-+#endif
-+
-+/* externs */
-+extern struct atm_dev *mydev;
-+extern unsigned int oamFarLBCount[4];
-+extern int dslhal_support_restoreTrainingInfo(PITIDSLHW_T pIhw);
-+/* gloabal functions */
-+
-+/* end of global functions */
-+
-+/* module wide declars */
-+static PITIDSLHW_T    pIhw;
-+static char    mod_req[16]={'\t'};
-+static volatile int bshutdown; 
-+static char info[MAX_STR_SIZE];
-+static DECLARE_MUTEX_LOCKED(adsl_sem_overlay); /* Used for DSL Polling enable     */
-+kthread_t overlay_thread;
-+/* end of module wide declars */
-+
-+/* Internal Functions */
-+static void tn7dsl_chng_modulation(void* data);
-+static void tn7dsl_set_modulation(void* data);
-+static int tn7dsl_reload_overlay(void);
-+static int dslmod_sysctl(ctl_table *ctl, int write, struct file * filp, void *buffer, size_t *lenp);
-+static void tn7dsl_register_dslss_led(void);
-+void tn7dsl_dslmod_sysctl_register(void);
-+void tn7dsl_dslmod_sysctl_unregister(void);
-+/* end of internal functions */
-+
-+
-+
-+
-+
-+/* prototypes */
-+
-+/* start new kthread (called by creator) */
-+void start_kthread(void (*func)(kthread_t *), kthread_t *kthread);
-+
-+/* stop a running thread (called by "killer") */
-+void stop_kthread(kthread_t *kthread);
-+
-+/* setup thread environment (called by new thread) */
-+void init_kthread(kthread_t *kthread, char *name);
-+
-+/* cleanup thread environment (called by thread upon receiving termination signal) */
-+void exit_kthread(kthread_t *kthread);
-+
-+
-+
-+/* private functions */
-+static void kthread_launcher(void *data)
-+{
-+        kthread_t *kthread = data;
-+        kernel_thread((int (*)(void *))kthread->function, (void *)kthread, 0);
-+        
-+}
-+
-+/* public functions */
-+
-+/* create a new kernel thread. Called by the creator. */
-+void start_kthread(void (*func)(kthread_t *), kthread_t *kthread)
-+{
-+        /* initialize the semaphore:
-+           we start with the semaphore locked. The new kernel
-+           thread will setup its stuff and unlock it. This
-+           control flow (the one that creates the thread) blocks
-+           in the down operation below until the thread has reached
-+           the up() operation.
-+         */
-+        //init_MUTEX_LOCKED(&kthread->startstop_sem);
-+
-+        /* store the function to be executed in the data passed to
-+           the launcher */
-+        kthread->function=func;
-+        
-+        /* create the new thread my running a task through keventd */
-+
-+        /* initialize the task queue structure */
-+        kthread->tq.sync = 0;
-+        INIT_LIST_HEAD(&kthread->tq.list);
-+        kthread->tq.routine =  kthread_launcher;
-+        kthread->tq.data = kthread;
-+
-+        /* and schedule it for execution */
-+        schedule_task(&kthread->tq);
-+
-+        /* wait till it has reached the setup_thread routine */
-+        //down(&kthread->startstop_sem);
-+               
-+}
-+
-+/* stop a kernel thread. Called by the removing instance */
-+void stop_kthread(kthread_t *kthread)
-+{
-+        if (kthread->thread == NULL)
-+        {
-+                printk("stop_kthread: killing non existing thread!\n");
-+                return;
-+        }
-+
-+        /* this function needs to be protected with the big
-+       kernel lock (lock_kernel()). The lock must be
-+           grabbed before changing the terminate
-+       flag and released after the down() call. */
-+        lock_kernel();
-+        
-+        /* initialize the semaphore. We lock it here, the
-+           leave_thread call of the thread to be terminated
-+           will unlock it. As soon as we see the semaphore
-+           unlocked, we know that the thread has exited.
-+    */
-+        //init_MUTEX_LOCKED(&kthread->startstop_sem);
-+
-+        /* We need to do a memory barrier here to be sure that
-+           the flags are visible on all CPUs. 
-+        */
-+        mb();
-+
-+        /* set flag to request thread termination */
-+        kthread->terminate = 1;
-+
-+        /* We need to do a memory barrier here to be sure that
-+           the flags are visible on all CPUs. 
-+        */
-+        mb();
-+        kill_proc(kthread->thread->pid, SIGKILL, 1);
-+       
-+        /* block till thread terminated */
-+        //down(&kthread->startstop_sem);
-+
-+        /* release the big kernel lock */
-+        unlock_kernel();
-+
-+        /* now we are sure the thread is in zombie state. We
-+           notify keventd to clean the process up.
-+        */
-+        kill_proc(2, SIGCHLD, 1);
-+
-+}
-+
-+/* initialize new created thread. Called by the new thread. */
-+void init_kthread(kthread_t *kthread, char *name)
-+{
-+        /* lock the kernel. A new kernel thread starts without
-+           the big kernel lock, regardless of the lock state
-+           of the creator (the lock level is *not* inheritated)
-+        */
-+        lock_kernel();
-+
-+        /* fill in thread structure */
-+        kthread->thread = current;
-+
-+        /* set signal mask to what we want to respond */
-+        siginitsetinv(&current->blocked, sigmask(SIGKILL)|sigmask(SIGINT)|sigmask(SIGTERM));
-+
-+        /* initialise wait queue */
-+        init_waitqueue_head(&kthread->queue);
-+
-+        /* initialise termination flag */
-+        kthread->terminate = 0;
-+
-+        /* set name of this process (max 15 chars + 0 !) */
-+        sprintf(current->comm, name);
-+        
-+        /* let others run */
-+        unlock_kernel();
-+
-+        /* tell the creator that we are ready and let him continue */
-+        //up(&kthread->startstop_sem);
-+
-+}
-+
-+/* cleanup of thread. Called by the exiting thread. */
-+void exit_kthread(kthread_t *kthread)
-+{
-+        /* we are terminating */
-+
-+    /* lock the kernel, the exit will unlock it */
-+        lock_kernel();
-+        kthread->thread = NULL;
-+        mb();
-+
-+        /* notify the stop_kthread() routine that we are terminating. */
-+    //up(&kthread->startstop_sem);
-+    /* the kernel_thread that called clone() does a do_exit here. */
-+
-+    /* there is no race here between execution of the "killer" and real termination
-+       of the thread (race window between up and do_exit), since both the
-+       thread and the "killer" function are running with the kernel lock held.
-+       The kernel lock will be freed after the thread exited, so the code
-+       is really not executed anymore as soon as the unload functions gets
-+       the kernel lock back.
-+       The init process may not have made the cleanup of the process here,
-+       but the cleanup can be done safely with the module unloaded.
-+    */
-+
-+}
-+
-+
-+
-+int os_atoi(const char *pStr)
-+{
-+  int retVal = -1;
-+
-+  if(*pStr=='-')
-+    retVal =  -simple_strtoul(pStr+1, (char **)NULL, 10);
-+  else
-+    retVal =  simple_strtoul(pStr, (char **)NULL, 10);  
-+  return retVal ;
-+}
-+
-+
-+int os_atoh(const char *pStr)
-+{
-+  int retVal = -1;
-+
-+  if(*pStr=='-')
-+    retVal =  -simple_strtoul(pStr+1, (char **)NULL, 16);
-+  else
-+    retVal =  simple_strtoul(pStr, (char **)NULL, 16);  
-+  return retVal ;
-+}
-+
-+unsigned long os_atoul(const char *pStr)
-+{
-+  unsigned long retVal = -1;
-+
-+  retVal =  simple_strtoul(pStr, (char **)NULL, 10);  
-+  return retVal ;
-+}
-+
-+void dprintf( int uDbgLevel, char * szFmt, ...)
-+{
-+#ifdef DEBUG_BUILD
-+    static char     buff[256];
-+    va_list  ap; 
-+
-+    if( __guDbgLevel < uDbgLevel) 
-+        return;
-+
-+    va_start( ap, szFmt); 
-+    vsprintf((char *)buff, szFmt, ap); 
-+    va_end(ap); 
-+    printk("%s", buff);
-+#endif
-+}
-+
-+/*int strcmp(const char *s1, const char *s2)
-+{
-+
-+  int i=0;
-+  
-+  while(s1[i] !=0)
-+  {
-+    if(s2[i]==0)
-+      return -1;
-+    if(s1[i] != s2[i])
-+      return 1;
-+    i++;
-+  }
-+  if(s2[i] != 0)
-+    return 1;
-+  return 0;
-+}
-+*/
-+
-+int shim_osLoadFWImage(unsigned char *ptr)
-+{
-+  unsigned int bytesRead;
-+  mm_segment_t  oldfs;  
-+  static struct file *filp;
-+  unsigned int imageLength=0x4ffff;  
-+   
-+    
-+  dprintf(4, "tn7dsl_read_dsp()\n");
-+
-+  dprintf(4,"open file %s\n", DSP_FIRMWARE_PATH);
-+  
-+  filp=filp_open(DSP_FIRMWARE_PATH
-+                                  ,00,O_RDONLY);
-+      
-+  if(filp ==NULL)
-+  {
-+    printk("Failed: Could not open DSP binary file\n");
-+          return -1;
-+  }
-+      
-+  if (filp->f_op->read==NULL)
-+          return -1;  /* File(system) doesn't allow reads */
-+
-+        /* Now read bytes from postion "StartPos" */
-+        filp->f_pos = 0;
-+  oldfs = get_fs();
-+        set_fs(KERNEL_DS);
-+        bytesRead = filp->f_op->read(filp,ptr,imageLength,&filp->f_pos);
-+
-+  dprintf(4,"file length = %d\n", bytesRead);
-+
-+  set_fs(oldfs);
-+
-+        /* Close the file */
-+        fput(filp); 
-+    
-+  return bytesRead;
-+}
-+
-+unsigned int shim_read_overlay_page(void *ptr, unsigned int secOffset, unsigned int secLength)
-+{
-+  unsigned int bytesRead;
-+  mm_segment_t  oldfs;  
-+  struct file *filp;
-+  
-+  dprintf(4,"shim_read_overlay_page\n");
-+  //dprintf(4,"sec offset=%d, sec length =%d\n", secOffset, secLength);
-+  
-+  filp=filp_open(DSP_FIRMWARE_PATH,00,O_RDONLY);  
-+  if(filp ==NULL)
-+  {
-+    printk("Failed: Could not open DSP binary file\n");
-+          return -1;
-+  }
-+      
-+  if (filp->f_op->read==NULL)
-+          return -1;  /* File(system) doesn't allow reads */
-+
-+  /* Now read bytes from postion "StartPos" */
-+
-+  if(filp->f_op->llseek)
-+    filp->f_op->llseek(filp,secOffset, 0);
-+  oldfs = get_fs();
-+  set_fs(KERNEL_DS);
-+  filp->f_pos = secOffset;
-+  bytesRead = filp->f_op->read(filp,ptr,secLength,&filp->f_pos);
-+
-+  set_fs(oldfs);
-+   /* Close the file */
-+  fput(filp);  
-+  return bytesRead;
-+}
-+
-+int shim_osLoadDebugFWImage(unsigned char *ptr)
-+{
-+  return 0;
-+}
-+int shim_osStringCmp(const char *s1, const char *s2)
-+{
-+  return strcmp(s1, s2);
-+}
-+
-+void *shim_osAllocateMemory(unsigned int size)
-+{
-+  return ((void *)kmalloc(size, GFP_KERNEL));
-+}
-+
-+void *shim_osAllocateDmaMemory(unsigned int size)
-+{
-+  /*
-+  int order;
-+
-+  order=1;
-+  size=size/4096;
-+  while(size >= 1)
-+  {
-+    order++;
-+    size=size/2;
-+  }
-+
-+  return ( (void *)__get_free_pages(GFP_ATOMIC, order));
-+  */
-+  //return ((void *)kmalloc(size, GFP_ATOMIC));
-+  //return ((void *)kmalloc(size, GFP_KERNEL));
-+  void *ptr;
-+
-+  ptr = kmalloc(size, GFP_ATOMIC);
-+  if(ptr==NULL)
-+  {
-+    printk("failed atomic\n");
-+    ptr = kmalloc(size, GFP_KERNEL);
-+    if(ptr==NULL)
-+    {
-+      printk("failed kernel\n");
-+      ptr = kmalloc(size, GFP_KERNEL|GFP_DMA);
-+    }
-+  }
-+  printk("size=%d\n", size);
-+  return ptr;
-+
-+}
-+
-+
-+void shim_osFreeMemory(void *ptr, unsigned int size)
-+{
-+  
-+  kfree(ptr);
-+}
-+
-+void shim_osFreeDmaMemory(void *ptr, unsigned int size)
-+{
-+/*
-+  int order;
-+
-+  order=1;
-+  size=size/4096;
-+  while(size >=1)
-+  {
-+    order++;
-+    size=size/2;
-+  }
-+  free_pages(ptr, order);
-+*/
-+  kfree(ptr);
-+}
-+
-+void *shim_osAllocateVMemory(unsigned int size)
-+{
-+
-+  return ((void *)vmalloc(size));
-+}
-+
-+void shim_osFreeVMemory(void *ptr, unsigned int size)
-+{
-+  vfree(ptr);
-+}
-+
-+void shim_osMoveMemory(char *dst, char *src, unsigned int numBytes)
-+{
-+  memcpy(dst, src, numBytes);
-+}
-+
-+void shim_osZeroMemory(char *dst, unsigned int numBytes)
-+{
-+  memset(dst, 0, numBytes);
-+}
-+
-+void shim_osWriteBackCache(void *addr, unsigned int size)
-+{
-+  unsigned int i,Size=(((unsigned int)addr)&0xf)+size;
-+
-+  for (i=0;i<Size;i+=16,addr+=16)
-+  {
-+    __asm__(" .set mips3 ");
-+    __asm__(" cache  25, (%0)" : : "r" (addr));
-+    __asm__(" .set mips0 ");
-+  }
-+}
-+
-+void shim_osInvalidateCache(void *addr, unsigned int size)
-+{
-+  unsigned int i,Size=(((unsigned int)addr)&0xf)+size;
-+
-+  for (i=0;i<Size;i+=16,addr+=16)
-+  {
-+    __asm__(" .set mips3 ");
-+    __asm__("cache  17, (%0)" : : "r" (addr));
-+    __asm__(" .set mips0 ");
-+  }
-+}
-+
-+void shim_osClockWait(int val)
-+{
-+  unsigned int chkvalue;
-+  chkvalue=val/64;
-+  
-+  if(chkvalue > 1000)
-+    {
-+      mdelay(chkvalue/1000);
-+      return;
-+    }
-+  else
-+    udelay(val/64);
-+} /* end of cwait() */
-+
-+unsigned int shim_osClockTick(int val)
-+{
-+  return jiffies;
-+}
-+
-+int flags;
-+spinlock_t shimLock;
-+
-+void shim_osCriticalEnter(void)
-+{
-+  spin_lock_irqsave(&shimLock, flags);
-+
-+}
-+
-+
-+void shim_osCriticalExit(void)
-+{
-+  spin_unlock_irqrestore(&shimLock, flags);
-+}
-+
-+
-+int tn7dsl_proc_stats(char* buf, char **start, off_t offset, int count,
-+                 int *eof, void *data)
-+{
-+  
-+  int len = 0;
-+  int limit = count - 80;
-+  int F4count, F5count;
-+  
-+  
-+  /* Read Ax5 Stats */
-+  dslhal_api_gatherStatistics(pIhw);
-+  
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\nAR7 DSL Modem Statistics:\n");
-+  if(len<=limit)
-+    len += sprintf(buf+len, "--------------------------------\n");
-+  /* us and ds Connection Rates */
-+  if(len<=limit)
-+    len += sprintf(buf+len, "[DSL Modem Stats]\n");
-+
-+
-+  if(len<=limit)
-+  {
-+    if(pIhw->lConnected != 1)
-+    {
-+      pIhw->AppData.USConRate = 0;
-+      pIhw->AppData.DSConRate = 0;
-+    }
-+    len += sprintf(buf+len, "\tUS Connection Rate:\t%u\tDS Connection Rate:\t%u\n",
-+                   (unsigned int)pIhw->AppData.USConRate,
-+                   (unsigned int)pIhw->AppData.DSConRate );
-+  }
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tDS Line Attenuation:\t%u\tDS Margin:\t\t%u\n",
-+                   (unsigned int)pIhw->AppData.dsLineAttn/2,
-+                   (unsigned int)pIhw->AppData.dsMargin/2 );
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tUS Line Attenuation:\t%u\tUS Margin:\t\t%u\n",
-+                   (unsigned int)pIhw->AppData.usLineAttn,
-+                   (unsigned int)pIhw->AppData.usMargin );
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tUS Payload :\t\t%u\tDS Payload:\t\t%u\n",
-+                   ((unsigned int)pIhw->AppData.usAtm_count[0] + (unsigned int)pIhw->AppData.usAtm_count[1])*48,
-+                   ((unsigned int)pIhw->AppData.dsGood_count[0] + (unsigned int)pIhw->AppData.dsGood_count[1])*48);
-+  /* Superframe Count */
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tUS Superframe Cnt :\t%u\tDS Superframe Cnt:\t%u\n",
-+                   (unsigned int)pIhw->AppData.usSuperFrmCnt,
-+                   (unsigned int)pIhw->AppData.dsSuperFrmCnt );
-+
-+  /* US and DS power */
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tUS Transmit Power :\t%u\tDS Transmit Power:\t%u\n",
-+                   (unsigned int)pIhw->AppData.usTxPower/256,
-+                   (unsigned int)pIhw->AppData.dsTxPower/256 );
-+  /* DSL Stats Errors*/  
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tLOS errors:\t\t%u\tSEF errors:\t\t%u\n",
-+                   (unsigned int)pIhw->AppData.LOS_errors,
-+                   (unsigned int)pIhw->AppData.SEF_errors );
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tFrame mode:\t\t%u\tMax Frame mode:\t\t%u\n",
-+                   (unsigned int)pIhw->AppData.FrmMode,
-+                   (unsigned int)pIhw->AppData.MaxFrmMode );
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tTrained Path:\t\t%u\tUS Peak Cell Rate:\t%u\n",
-+                   (unsigned int)pIhw->AppData.TrainedPath,
-+                   (unsigned int)pIhw->AppData.USConRate*1000/8/53 );
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tTrained Mode:\t\t%u\tSelected Mode:\t\t%u\n",
-+                   (unsigned int)pIhw->AppData.TrainedMode, (unsigned int)pIhw->AppData.StdMode );
-+
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tATUC Vendor ID:\t%u\tATUC Revision:\t\t%u\n",
-+                   (unsigned int)pIhw->AppData.atucVendorId, pIhw->AppData.atucRevisionNum);
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tHybrid Selected:\t%u\n",
-+                   (unsigned int)pIhw->AppData.currentHybridNum);
-+ 
-+  /* Upstream Interleaved Errors */
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\n\t[Upstream (TX) Interleave path]\n");
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n",
-+                   (unsigned int)pIhw->AppData.usICRC_errors,
-+                   (unsigned int)pIhw->AppData.usIFEC_errors,
-+                   (unsigned int)pIhw->AppData.usINCD_error);
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n",
-+                   (unsigned int)pIhw->AppData.usILCD_errors,
-+                   (unsigned int)pIhw->AppData.usIHEC_errors);
-+  /* Downstream Interleaved Errors */
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\n\t[Downstream (RX) Interleave path]\n");
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n",
-+                   (unsigned int)pIhw->AppData.dsICRC_errors,
-+                   (unsigned int)pIhw->AppData.dsIFEC_errors,
-+                   (unsigned int)pIhw->AppData.dsINCD_error);
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n",
-+                   (unsigned int)pIhw->AppData.dsILCD_errors,
-+                   (unsigned int)pIhw->AppData.dsIHEC_errors);
-+  /* Upstream Fast Errors */
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\n\t[Upstream (TX) Fast path]\n");
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n",
-+                   (unsigned int)pIhw->AppData.usFCRC_errors,
-+                   (unsigned int)pIhw->AppData.usFFEC_errors,
-+                   (unsigned int)pIhw->AppData.usFNCD_error);
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n",
-+                   (unsigned int)pIhw->AppData.usFLCD_errors,
-+                   (unsigned int)pIhw->AppData.usFHEC_errors);
-+  /* Downstream Fast Errors */
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\n\t[Downstream (RX) Fast path]\n");
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n",
-+                   (unsigned int)pIhw->AppData.dsFCRC_errors,
-+                   (unsigned int)pIhw->AppData.dsFFEC_errors,
-+                   (unsigned int)pIhw->AppData.dsFNCD_error);
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n",
-+                   (unsigned int)pIhw->AppData.dsFLCD_errors,
-+                   (unsigned int)pIhw->AppData.dsFHEC_errors);
-+  /* ATM stats upstream */
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\n[ATM Stats]");
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\n\t[Upstream/TX]\n");
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tGood Cell Cnt:\t%u\n\tIdle Cell Cnt:\t%u\n\n",
-+                   (unsigned int)pIhw->AppData.usAtm_count[0] + (unsigned int)pIhw->AppData.usAtm_count[1],
-+                   (unsigned int)pIhw->AppData.usIdle_count[0] + (unsigned int)pIhw->AppData.usIdle_count[1]);
-+  /* ATM stats downstream */
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\n\t[Downstream/RX)]\n");
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tGood Cell Cnt:\t%u\n\tIdle Cell Cnt:\t%u\n\tBad Hec Cell Cnt:\t%u\n",
-+                   (unsigned int)pIhw->AppData.dsGood_count[0] + (unsigned int)pIhw->AppData.dsGood_count[1],
-+                   (unsigned int)pIhw->AppData.dsIdle_count[0] + (unsigned int)pIhw->AppData.dsIdle_count[1],
-+                   (unsigned int)pIhw->AppData.dsBadHec_count[0] + (unsigned int)pIhw->AppData.dsBadHec_count[1]);
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tOverflow Dropped Cell Cnt:\t%u\n",
-+                   (unsigned int)pIhw->AppData.dsOVFDrop_count[0] + (unsigned int)pIhw->AppData.dsOVFDrop_count[1]);
-+  tn7sar_get_stats(pIhw->pOsContext);
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\n[SAR AAL5 Stats]\n");
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tTx PDU's:\t%u\n\tRx PDU's:\t%u\n",
-+                   sarStat.txPktCnt,
-+                   sarStat.rxPktCnt);
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tTx Total Bytes:\t%u\n\tRx Total Bytes:\t%u\n",
-+                   sarStat.txBytes,
-+                   sarStat.rxBytes);
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\tTx Total Error Counts:\t%u\n\tRx Total Error Counts:\t%u\n\n",
-+                   sarStat.txErrors,
-+                   sarStat.rxErrors);
-+
-+  /* oam loopback info */
-+  if(len<=limit)
-+    len += sprintf(buf+len, "\n[OAM Stats]\n");
-+
-+  tn7sar_get_near_end_loopback_count(&F4count, &F5count);
-+
-+  if(len<=limit)
-+    {
-+    len += sprintf(buf+len, "\tNear End F5 Loop Back Count:\t%u\n\tNear End F4 Loop Back Count:\t%u\n\tFar End F5 Loop Back Count:\t%u\n\tFar End F4 Loop Back Count:\t%u\n",
-+                  F5count,
-+                  F4count,
-+                  oamFarLBCount[0] + oamFarLBCount[2],
-+                  oamFarLBCount[1] + oamFarLBCount[3]);
-+    }
-+  return len;
-+}
-+
-+int
-+tn7dsl_proc_modem(char* buf, char **start, off_t offset, int count,
-+                 int *eof, void *data)
-+{
-+  
-+  int len = 0;
-+  int limit = count - 80;
-+
-+  char *state;
-+  int tag;
-+   
-+  tag= dslhal_api_pollTrainingStatus(pIhw);
-+  tag = pIhw->AppData.bState;
-+  
-+  switch(tag){
-+    case 0:       state = "ACTREQ";     break;
-+    case 1:       state = "QUIET1";     break;
-+    case 2:       state = "IDLE";       break;
-+    case 3:       state = "INIT";       break;
-+    case 4:       state = "RTDL";       break;
-+    case 5:       state = "SHOWTIME";   break;
-+    default:      state = "unknown";    break;
-+  }
-+  
-+  if(pIhw->lConnected == 1)
-+    state = "SHOWTIME";
-+  if(len<=limit)
-+    len += sprintf(buf+len,"%s\n",state);
-+  
-+  return len;
-+}
-+
-+
-+
-+int tn7dsl_handle_interrupt(void)
-+{
-+  int intsrc;
-+  unsigned char cMsgRa[6];
-+  short margin;
-+
-+  dprintf(4, "tn7dsl_handle_dsl_interrupt()\n");
-+  if(pIhw)
-+  {
-+    intsrc=dslhal_api_acknowledgeInterrupt(pIhw);
-+    dslhal_api_handleTrainingInterrupt(pIhw, intsrc);
-+
-+    if(pIhw->lConnected == TC_SYNC)
-+    {
-+      
-+      if(dslInSync == 0)
-+      {
-+        printk("DSL in Sync\n");
-+        tn7atm_device_connect_status(pIhw->pOsContext, 1);
-+        dslhal_api_initStatistics(pIhw);
-+        dslhal_api_gatherStatistics(pIhw);
-+#ifdef CONFIG_LED_MODULE
-+//        led_operation(MOD_ADSL, DEF_ADSL_SYNC);           
-+        led_on = DEF_ADSL_SYNC;
-+#endif
-+        /* add auto margin retrain */
-+        if(pIhw->AppData.TrainedMode < 5)
-+        {
-+          if(bMarginRetrainEnable && bMarginThConfig == 0)
-+          {
-+            dslhal_support_getCMsgsRa(pIhw, cMsgRa);
-+            margin = *(unsigned short *)&cMsgRa[4];
-+            margin = (margin >> 6) & 0x3f;
-+            if(margin & 0x20) // highest bit is 1
-+            {
-+              margin = -(margin & 0x1f);
-+            }
-+          
-+            //printk("margin = %d, cmsg-ra = %02x %02x %02x %02x %02x %02x\n", margin, cMsgRa[0],cMsgRa[1],cMsgRa[2],cMsgRa[3],cMsgRa[4],cMsgRa[5]);
-+            dslhal_api_setMarginThreshold(pIhw, margin*2); /* DSL margin is in 0.5db */
-+          }
-+        }
-+
-+      }
-+      dslInSync = 1;
-+    }
-+    else
-+    {
-+      if(dslInSync == 1)
-+      {
-+        dslInSync = 0;
-+        tn7atm_device_connect_status(pIhw->pOsContext, 0);
-+        up(&adsl_sem_overlay);
-+        printk("DSL out of syn\n");
-+      }
-+#ifdef CONFIG_LED_MODULE
-+      if(pIhw->AppData.bState < RSTATE_INIT)
-+      {
-+        if(led_on != DEF_ADSL_IDLE)
-+        {
-+//          led_operation(MOD_ADSL, DEF_ADSL_IDLE);           
-+          led_on = DEF_ADSL_IDLE;
-+        }
-+      }
-+      else
-+      {
-+        if(led_on != DEF_ADSL_TRAINING)
-+        {
-+//          led_operation(MOD_ADSL, DEF_ADSL_TRAINING);           
-+          led_on = DEF_ADSL_TRAINING;
-+        }
-+
-+      }
-+      
-+#endif
-+
-+    }
-+  }
-+  return 0;
-+}
-+
-+
-+int tn7dsl_get_dslhal_version(char *pVer)
-+{
-+  dslVer ver;
-+
-+  dslhal_api_getDslHalVersion(&ver);
-+
-+  memcpy(pVer,&ver,8);
-+  return 0;
-+}
-+
-+int tn7dsl_get_dsp_version(char *pVer)
-+{
-+  dspVer ver;
-+  dslhal_api_getDspVersion(pIhw, &ver);
-+  memcpy(pVer, &ver, 9);
-+  return 0;
-+}
-+
-+
-+static int
-+tn7dsl_get_modulation(void)
-+{
-+  char  *ptr = NULL;
-+  
-+  dprintf(4, "tn7dsl_get_modulation\n");
-+  //printk("tn7dsl_get_modulation\n");
-+  ptr = prom_getenv("modulation");
-+
-+  if (!ptr) {
-+    //printk("modulation is not set in adam2 env\n");
-+    //printk("Using multimode\n");
-+    return 0;
-+  }
-+  printk("dsl modulation = %s\n", ptr);
-+
-+  tn7dsl_set_modulation(ptr);
-+
-+  return 0;
-+}
-+
-+
-+static int tn7dsl_set_dsl(void)
-+{
-+
-+  char  *ptr = NULL;
-+  int value;
-+  int i, offset[2]={4,11},oamFeature=0;
-+  char tmp[4];
-+  char dspVer[10];
-+ 
-+  // OAM Feature Configuration
-+  dslhal_api_dspInterfaceRead(pIhw,(unsigned int)pIhw->pmainAddr, 2, (unsigned int *)&offset, (unsigned char *)&oamFeature, 4);
-+  oamFeature |= dslhal_support_byteSwap32(0x0000000C);
-+  dslhal_api_dspInterfaceWrite(pIhw,(unsigned int)pIhw->pmainAddr, 2, (unsigned int *)&offset, (unsigned char *)&oamFeature, 4);
-+
-+  // modulation 
-+  ptr = prom_getenv("modulation");
-+  if (ptr) 
-+  {
-+    printk("dsl modulation = %s\n", ptr);
-+    tn7dsl_set_modulation(ptr);  
-+  }
-+
-+  // margin retrain
-+  ptr = NULL;
-+  ptr = prom_getenv("enable_margin_retrain");
-+  if(ptr)
-+  {
-+    value = os_atoi(ptr);
-+    if(value == 1)
-+    {
-+      dslhal_api_setMarginMonitorFlags(pIhw, 0, 1);
-+      bMarginRetrainEnable = 1;
-+      printk("enable showtime margin monitor.\n");
-+      ptr = NULL;
-+      ptr = prom_getenv("margin_threshold");
-+      if(ptr)
-+      {
-+        value = os_atoi(ptr);
-+        printk("Set margin threshold to %d x 0.5 db\n",value);
-+        if(value >= 0)
-+        {
-+          dslhal_api_setMarginThreshold(pIhw, value);
-+          bMarginThConfig=1;
-+        }
-+      }
-+    }
-+  }
-+
-+  // rate adapt
-+  ptr = NULL;
-+  ptr = prom_getenv("enable_rate_adapt");
-+  if(ptr)
-+  {
-+    dslhal_api_setRateAdaptFlag(pIhw, os_atoi(ptr));
-+  }
-+
-+  // trellis
-+  ptr = NULL;
-+  ptr = prom_getenv("enable_trellis");
-+  if(ptr)
-+  {
-+    dslhal_api_setTrellisFlag(pIhw, os_atoi(ptr));
-+  }
-+
-+  // maximum bits per carrier
-+  ptr = NULL;
-+  ptr = prom_getenv("maximum_bits_per_carrier");
-+  if(ptr)
-+  {
-+    dslhal_api_setMaxBitsPerCarrier(pIhw, os_atoi(ptr));
-+  }
-+
-+  // maximum interleave depth
-+  ptr = NULL;
-+  ptr = prom_getenv("maximum_interleave_depth");
-+  if(ptr)
-+  {
-+    dslhal_api_setMaxInterleaverDepth(pIhw, os_atoi(ptr));
-+  }
-+
-+  // inner and outer pairs
-+  ptr = NULL;
-+  ptr = prom_getenv("pair_selection");
-+  if(ptr)
-+  {
-+    dslhal_api_selectInnerOuterPair(pIhw, os_atoi(ptr));
-+  }
-+  
-+  ptr = NULL;
-+  ptr = prom_getenv("dgas_polarity");
-+  if(ptr)
-+  {
-+    dslhal_api_configureDgaspLpr(pIhw, 1, 1);
-+    dslhal_api_configureDgaspLpr(pIhw, 0, os_atoi(ptr));
-+  }
-+
-+  ptr = NULL;
-+  ptr = prom_getenv("los_alarm");
-+  if(ptr)
-+  {
-+    dslhal_api_disableLosAlarm(pIhw, os_atoi(ptr));
-+  }
-+
-+  ptr = NULL;
-+  ptr = prom_getenv("eoc_vendor_id");
-+  if(ptr)
-+  {
-+    for(i=0;i<8;i++)
-+    {
-+      tmp[0]=ptr[i*2];
-+      tmp[1]=ptr[i*2+1];
-+      tmp[2]=0;
-+      EOCVendorID[i] = os_atoh(tmp);
-+      //printk("tmp=%s--", tmp);
-+      //printk("ID[%d]=0x%02x ", i, (unsigned char)EOCVendorID[i]);
-+    }
-+    tn7dsl_get_dsp_version(dspVer);
-+    //printk("Annex =%d\n", dspVer[8]);
-+    if(dspVer[8]==2) // annex b
-+    {
-+      //printk("EOCVendorID=%02x %02x %02x %02x %02x %02x %02x %02x\n", EOCVendorID[0], EOCVendorID[1], EOCVendorID[2], EOCVendorID[3],
-+      //                                                                EOCVendorID[4], EOCVendorID[5], EOCVendorID[6], EOCVendorID[7]);
-+      dslhal_api_setEocVendorId(pIhw, EOCVendorID);
-+    }
-+    
-+  }
-+  
-+  return 0;
-+}
-+  
-+
-+
-+  
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ * 
-+ *  Function: static void tn7dsl_init(void)
-+ *
-+ *  Description: This function initializes
-+ *               Ar7 DSL interface
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+
-+int tn7dsl_init(void *priv)
-+{
-+  
-+  printk("Initializing DSL interface\n");
-+  
-+  
-+  /* start dsl */
-+  if(dslhal_api_dslStartup(&pIhw) !=0 )
-+  {
-+    printk("DSL start failed.\n");
-+    return -1;
-+  }
-+ 
-+  // set dsl into overlay page reload mode
-+  pIhw->bAutoRetrain = 1;
-+
-+  // set default training properties
-+  tn7dsl_set_dsl();
-+
-+  pIhw->pOsContext = priv;
-+
-+  //start_kthread(tn7dsl_reload_overlay, &overlay_thread);
-+
-+  /*register dslss LED with led module */
-+#ifdef CONFIG_LED_MODULE
-+  tn7dsl_register_dslss_led();
-+#endif
-+
-+  
-+  return 0;  /* What do we return here? */
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
-+ *
-+ *  Function: int avsar_exit(void)
-+ *
-+ *  Description: Avalanche SAR exit function
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+
-+void tn7dsl_exit (void)
-+{
-+ 
-+  bshutdown = 1;
-+#ifdef CONFIG_LED_MODULE
-+#ifdef DEREGISTER_LED
-+  //down(&adsl_sem_overlay);
-+  deregister_led_drv(LED_NUM_1);
-+  deregister_led_drv(LED_NUM_2);
-+#else
-+//  led_operation(MOD_ADSL,DEF_ADSL_IDLE);
-+#endif
-+#endif
-+  stop_kthread(&overlay_thread);
-+  dslhal_api_dslShutdown(pIhw);
-+
-+}
-+
-+
-+static int tn7dsl_process_oam_string(int *type, int *pvpi, int *pvci, int *pdelay)
-+{
-+  int i=1;
-+  int j=0;
-+  int vci, vpi;
-+  char tmp[16];
-+  int chan;
-+  int tt;
-+
-+  while(j<8)
-+  {
-+    tmp[j] = mod_req[i];
-+    //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]); 
-+    if(tmp[j] == 0x50 || tmp[j] == 0x70)
-+      break;
-+    j++;
-+    i++;
-+  }
-+
-+  tmp[j] = 0;
-+  vpi = os_atoi(tmp);
-+
-+  i++;
-+  j=0;
-+  while(j<8)
-+  {
-+    tmp[j] = mod_req[i];
-+    //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]); 
-+    if(tmp[j] == 0x43 || tmp[j] == 0x63)
-+      break;
-+
-+    j++;
-+    i++;
-+  }
-+
-+  vci = os_atoi(tmp);
-+
-+  if(vci==0) // f4 oam
-+    *type = 1;
-+  else
-+    *type = 0;
-+
-+
-+  tt=5000;
-+  i++;
-+  j=0;
-+  tmp[j] = mod_req[i];
-+  if(tmp[j]==0x44 || tmp[j]==0x64)
-+  {
-+    i++;
-+    while(j<8)
-+    {
-+      tmp[j] = mod_req[i];
-+
-+      //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]); 
-+      if(tmp[j] == 0x54 || tmp[j] == 0x74)
-+        break;
-+
-+      j++;
-+      i++;
-+    }
-+    tt = os_atoi(tmp);
-+  }
-+
-+  chan = tn7atm_lut_find(vpi, vci);
-+  
-+  *pvci=vci;
-+  *pvpi=vpi;
-+  *pdelay =tt;
-+  dprintf(2, "oam chan=%d, type =%d\n", chan, *type);
-+ 
-+  return chan;
-+}
-+
-+static void tn7dsl_dump_memory(void)
-+{
-+  unsigned int *pUi;
-+  int i=1;
-+  int j=0;
-+  int addr, len;
-+  char tmp[16];
-+
-+
-+  while(j<8)
-+  {
-+    tmp[j] = mod_req[i];
-+    j++;
-+    i++;
-+  }
-+
-+  tmp[j] = 0;
-+          
-+  addr = os_atoh(tmp);
-+
-+  printk("start dump address =0x%x\n", addr);
-+  pUi = (unsigned int *)addr;
-+  i++;
-+  j=0;
-+  while(j<8)
-+  {
-+    tmp[j] = mod_req[i];
-+    //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]); 
-+    if(tmp[j] == 0x43 || tmp[j] == 0x63)
-+      break;
-+
-+    j++;
-+    i++;
-+  }
-+
-+  len = os_atoi(tmp);
-+  j=0;
-+  for(i=0; i<len; i++)
-+  {
-+    if(j==0)
-+      printk("0x%08x: ", (unsigned int)pUi);
-+    printk("%08x ", *pUi);
-+    pUi++;
-+    j++;
-+    if(j==4)
-+    {
-+      printk("\n");
-+      j=0;
-+    }
-+  }
-+     
-+}
-+
-+
-+
-+static int dslmod_sysctl(ctl_table *ctl, int write, struct file * filp,
-+      void *buffer, size_t *lenp)
-+{
-+  char *ptr;
-+  int ret, len = 0;
-+  int chan;
-+  int type;
-+  int vpi,vci,timeout;
-+  
-+  if (!*lenp || (filp->f_pos && !write)) {
-+    *lenp = 0;
-+    return 0;
-+    }
-+  /* DSL MODULATION is changed */
-+  if(write)
-+    {
-+    ret = proc_dostring(ctl, write, filp, buffer, lenp);
-+    
-+    switch (ctl->ctl_name)
-+      {
-+      case DEV_DSLMOD:
-+      ptr = strpbrk(info, " \t");
-+      strcpy(mod_req, info);
-+
-+      /* parse the string to determine the action */
-+      if(mod_req[0] == 0x45 || mod_req[0] == 0x65 ) // 'e', or 'E' f5 end to end 
-+      {
-+        chan = tn7dsl_process_oam_string(&type, &vpi, &vci, &timeout);
-+        tn7sar_oam_generation(pIhw->pOsContext, chan, type, vpi, vci, timeout);
-+      }
-+      else if(mod_req[0] == 0x53 || mod_req[0] == 0x73 ) // 's', or 'S' f5 seg to seg
-+      {
-+        chan=tn7dsl_process_oam_string(&type, &vpi, &vci,&timeout);
-+        type = type | (1<<1);
-+        tn7sar_oam_generation(pIhw->pOsContext, chan, type, vpi, vci,timeout);
-+      }
-+    //debug only. Dump memory
-+      else if(mod_req[0] == 0x44 || mod_req[0] == 0x64 ) // 'd' or 'D'
-+        tn7dsl_dump_memory();
-+      else
-+        tn7dsl_chng_modulation(info);
-+      break;
-+      }
-+    }
-+  else
-+    {
-+    len += sprintf(info+len, mod_req);
-+    ret = proc_dostring(ctl, write, filp, buffer, lenp);
-+    }
-+  return ret;
-+}
-+
-+
-+ctl_table dslmod_table[] = {
-+  {DEV_DSLMOD, "dslmod", info, DSL_MOD_SIZE, 0644, NULL, &dslmod_sysctl},
-+  {0}
-+  };
-+
-+/* Make sure that /proc/sys/dev is there */
-+ctl_table dslmod_root_table[] = {
-+#ifdef CONFIG_PROC_FS
-+  {CTL_DEV, "dev", NULL, 0, 0555, dslmod_table},
-+#endif /* CONFIG_PROC_FS */
-+  {0}
-+  };
-+
-+static struct ctl_table_header *dslmod_sysctl_header;
-+
-+void tn7dsl_dslmod_sysctl_register(void)
-+{
-+  static int initialized;
-+  
-+  if (initialized == 1)
-+    return;
-+  
-+  dslmod_sysctl_header = register_sysctl_table(dslmod_root_table, 1);
-+  dslmod_root_table->child->de->owner = THIS_MODULE;
-+  
-+  /* set the defaults */
-+  info[0] = 0;
-+  
-+  initialized = 1;
-+}
-+
-+void tn7dsl_dslmod_sysctl_unregister(void)
-+{
-+  unregister_sysctl_table(dslmod_sysctl_header);
-+}
-+
-+static void 
-+tn7dsl_set_modulation(void* data)
-+{
-+  dprintf(4,"tn7dsl_set_modulation\n");
-+  
-+  if(!strcmp(data, "T1413"))
-+  {
-+    printk("retraining in T1413 mode\n");
-+    dslhal_api_setTrainingMode(pIhw, T1413_MODE);
-+    return;
-+  }
-+  if(!strcmp(data, "GDMT"))
-+  {
-+    dslhal_api_setTrainingMode(pIhw, GDMT_MODE);
-+    return;
-+  }
-+  if(!strcmp(data, "GLITE"))
-+  {
-+    dslhal_api_setTrainingMode(pIhw, GLITE_MODE);
-+    return;
-+  }
-+  if(!strcmp(data, "MMODE"))
-+  {
-+    dslhal_api_setTrainingMode(pIhw, MULTI_MODE);
-+    return;
-+  }
-+  if(!strcmp(data, "NMODE"))
-+  {
-+    dslhal_api_setTrainingMode(pIhw, NO_MODE);
-+    return;
-+  }
-+
-+  return;
-+}
-+
-+
-+/* Codes added for compiling tiadiag.o for Analog Diagnostic tests */
-+#ifdef ADIAG
-+
-+enum
-+{
-+  HOST_ACTREQ,         // Send R-ACKREQ and monitor for C-ACKx
-+  HOST_QUIET,          // Sit quietly doing nothing for about 60 seconds, DEFAULT STATE; R_IDLE
-+  HOST_XMITBITSWAP,    // Perform upstream bitswap - FOR INTERNAL USE ONLY
-+  HOST_RCVBITSWAP,     // Perform downstream bitswap - FOR INTERNAL USE ONLY
-+  HOST_RTDLPKT,        // Send a remote download packet - FOR INTERNAL USE ONLY
-+  HOST_CHANGELED,      // Read the LED settings and change accordingly
-+  HOST_IDLE,           // Sit quiet
-+  HOST_REVERBTEST,     // Generate REVERB for manufacturing test
-+  HOST_CAGCTEST,       // Set coarse receive gain for manufacturing test
-+  HOST_DGASP,          // send Dying Gasp messages through EOC channel
-+  HOST_GHSREQ,         // G.hs - FOR INTERNAL USE ONLY
-+  HOST_GHSMSG,         // G.hs - FOR INTERNAL USE ONLY
-+  HOST_GHS_SENDGALF,   // G.hs - FOR INTERNAL USE ONLY
-+  HOST_GHSEXIT,        // G.hs - FOR INTERNAL USE ONLY
-+  HOST_GHSMSG1,        // G.hs - FOR INTERNAL USE ONLY
-+  HOST_HYBRID,         // Enable/Disable automatic hybrid switch
-+  HOST_RJ11SELECT,     // RJ11 inner/outer pair select
-+  HOST_DIGITAL_MEM,    // Digital Diags: run external memory tests
-+  HOST_TXREVERB,       // AFE Diags: TX path Reverb
-+  HOST_TXMEDLEY,       // AFE Diags: TX path Medley
-+  HOST_RXNOISEPOWER,   // AFE Diags: RX noise power
-+  HOST_ECPOWER,        // AFE Diags: RX eco power
-+  HOST_ALL_ADIAG,      // AFE Diags: all major analog diagnostic modes. Host is responsible to initiate each diagnostic sessions
-+  HOST_USER_ADIAG,     // AFE Diags: Host fills in analog diagnostic input data structure as specified and requests DSP to perform measurements as specified
-+  HOST_QUIT_ADIAG,     // AFE Diags: Host requests DSP to quit current diagnostic session. This is used for stopping the transmit REVERB/MEDLEY
-+  HOST_NO_CMD,         // All others - G.hs - FOR INTERNAL USE ONLY
-+  HOST_DSLSS_SHUTDOWN, // Host initiated DSLSS shutdown message
-+  HOST_SET_GENERIC,    // Set generic CO profile
-+  HOST_UNDO_GENERIC    // Set profile previous to Generic
-+};
-+
-+enum
-+{
-+  DSP_IDLE,               // R_IDLE state entered
-+  DSP_ACTMON,             // R_ACTMON state entered
-+  DSP_TRAIN,              // R_TRAIN state entered
-+  DSP_ACTIVE,             // R_ACTIVE state entered
-+  DSP_XMITBITSWAP,        // Upstream bitswap complete - FOR INTERNAL USE ONLY
-+  DSP_RCVBITSWAP,         // Downstream bitswap complete - FOR INTERNAL USE ONLY
-+  DSP_RTDL,               // R_RTDL state entered - FOR INTERNAL USE ONLY
-+  DSP_RRTDLPKT,           // RTDL packet received - FOR INTERNAL USE ONLY
-+  DSP_XRTDLPKT,           // RTDL packet transmitted - FOR INTERNAL USE ONLY
-+  DSP_ERROR,              // Command rejected, wrong state for this command
-+  DSP_REVERBTEST,         // Manufacturing REVERB test mode entered
-+  DSP_CAGCTEST,           // Manufacturing receive gain test done
-+  DSP_OVERLAY_START,      // Notify host that page overlay has started - overlay number indicated by "tag"
-+  DSP_OVERLAY_END,        // Notify host that page overlay has ended   - overlay number indicated by "tag"
-+  DSP_CRATES1,            // CRATES1 message is valid and should be copied to host memory now
-+  DSP_SNR,                // SNR calculations are ready and should be copied to host memory now
-+  DSP_GHSMSG,             // G.hs - FOR INTERNAL USE ONLY
-+  DSP_RCVBITSWAP_TIMEOUT, // Acknowledge Message was not received within ~500 msec (26 Superframes).
-+  DSP_ATM_TC_SYNC,        // Indicates true TC sync on both the upstream and downstream. Phy layer ready for data xfer.
-+  DSP_ATM_NO_TC_SYNC,     // Indicates loss of sync on phy layer on either US or DS.
-+  DSP_HYBRID,             // DSP completed hybrid switch
-+  DSP_RJ11SELECT,         // DSP completed RJ11 inner/outer pair select
-+  DSP_INVALID_CMD,        // Manufacturing (Digital and AFE) diags: CMD received not recognized
-+  DSP_TEST_PASSED,        // Manufacturing diags: test passed
-+  DSP_TEST_FAILED,        // Manufacturing diags: test failed
-+  DSP_TXREVERB,           // Manufacturing AFE diags: Response to HOST_TXREVERB
-+  DSP_TXMEDLEY,           // Manufacturing AFE diags: Response to HOST_TXMEDLEY
-+  DSP_RXNOISEPOWER,       // Manufacturing AFE diags: Response to HOST_RXNOISEPOWER
-+  DSP_ECPOWER,            // Manufacturing AFE diags: Response to HOST_ECPOWER
-+  DSP_ALL_ADIAG,          // Manufacturing AFE diags: Response to HOST_ALL_ADIAG
-+  DSP_USER_ADIAG,         // Manufacturing AFE diags: Response to HOST_USER_ADIAG
-+  DSP_QUIT_ADIAG,         // Manufacturing AFE diags: Response to HOST_QUIT_ADIAG
-+  DSP_DGASP               // DSP Message to indicate dying gasp
-+};
-+
-+static unsigned char analogNoTonesTestArray[64]=
-+  {
-+    0,0,0,0,0,0,0,0,  // Tones 01-08
-+    0,0,0,0,0,0,0,0,  // Tones 09-16
-+    0,0,0,0,0,0,0,0,  // Tones 17-24
-+    0,0,0,0,0,0,0,0,  // Tones 25-32
-+    0,0,0,0,0,0,0,0,  // Tones 33-40
-+    0,0,0,0,0,0,0,0,  // Tones 41-48
-+    0,0,0,0,0,0,0,0,  // Tones 49-56
-+    0,0,0,0,0,0,0,0   // Tones 57-64
-+  };
-+
-+static unsigned char analogAllTonesTestArray[64]=
-+  {
-+    1,1,1,1,1,1,1,1,  // Tones 01-08
-+    1,1,1,1,1,1,1,1,  // Tones 09-16
-+    1,1,1,1,1,1,1,1,  // Tones 17-24
-+    1,1,1,1,1,1,1,1,  // Tones 25-32
-+    1,1,1,1,1,1,1,1,  // Tones 33-40
-+    1,1,1,1,1,1,1,1,  // Tones 41-48
-+    1,1,1,1,1,1,1,1,  // Tones 49-56
-+    1,1,1,1,1,1,1,1   // Tones 57-64
-+  };
-+
-+static unsigned char analogEvenTonesTestArray[64]=
-+  {
-+    0,1,0,1,0,1,0,1,  // Tones 01-08
-+    0,1,0,1,0,1,0,1,  // Tones 09-16
-+    0,1,0,1,0,1,0,1,  // Tones 17-24
-+    0,1,0,1,0,1,0,1,  // Tones 25-32
-+    0,1,0,1,0,1,0,1,  // Tones 33-40
-+    0,1,0,1,0,1,0,1,  // Tones 41-48
-+    0,1,0,1,0,1,0,1,  // Tones 49-56
-+    0,1,0,1,0,1,0,1   // Tones 57-64
-+  };
-+
-+static unsigned char analogOddTonesTestArray[64]=
-+  {
-+    1,0,1,0,1,0,1,0,  // Tones 01-08
-+    1,0,1,0,1,0,1,0,  // Tones 09-16
-+    1,0,1,0,1,0,1,0,  // Tones 17-24
-+    1,0,1,0,1,0,1,0,  // Tones 25-32
-+    1,0,1,0,1,0,1,0,  // Tones 33-40
-+    1,0,1,0,1,0,1,0,  // Tones 41-48
-+    1,0,1,0,1,0,1,0,  // Tones 49-56
-+    1,0,1,0,1,0,1,0   // Tones 57-64
-+  };
-+
-+unsigned int shim_osGetCpuFrequency(void)
-+{
-+  return 150;
-+}
-+
-+static void tn7dsl_adiag(int Test, unsigned char *missingTones)
-+{
-+  int rc,cmd, tag;
-+
-+  rc = dslhal_diags_anlg_setMissingTones(pIhw,missingTones);
-+  if(rc)
-+  {
-+    printk(" failed to set Missing town\n");
-+    return;
-+  }
-+
-+/*********** Start the actual test **********************/
-+
-+ if(Test==0)
-+   {
-+   printk("TX REVERB Test\n");
-+   rc = dslhal_support_writeHostMailbox(pIhw, HOST_TXREVERB, 0, 0, 0);
-+   if (rc)
-+     {
-+     printk("HOST_TXREVERB failed\n");
-+     return;
-+     }
-+
-+   }
-+ if(Test==1)
-+   {
-+     dprintf(0,"TX MEDLEY Test\n");
-+     rc = dslhal_support_writeHostMailbox(pIhw, HOST_TXMEDLEY, 0, 0, 0);
-+     if (rc)
-+       return;
-+   }
-+ dprintf(4,"dslhal_diags_anlg_testA() done\n");
-+ return;
-+}
-+  
-+
-+static void tn7dsl_diagnostic_test(char *data)
-+{
-+  if(!strcmp(data, "ADIAGRALL"))
-+  {
-+    printk("TX Reverb All tone\n");
-+    tn7dsl_adiag(0,analogAllTonesTestArray);
-+    return;
-+  }
-+  if(!strcmp(data, "ADIAGRNONE"))
-+  {
-+    printk("TX Reverb No tone\n");
-+    tn7dsl_adiag(0,analogNoTonesTestArray);
-+    return;
-+  }
-+  if(!strcmp(data, "ADIAGREVEN"))
-+  {
-+    printk("TX Reverb Even tone\n");
-+    tn7dsl_adiag(0,analogEvenTonesTestArray);
-+    return;
-+  }
-+  if(!strcmp(data, "ADIAGRODD"))
-+  {
-+    printk("TX Reverb Odd tone\n");
-+    tn7dsl_adiag(0,analogOddTonesTestArray);
-+    return;
-+  }
-+  if(!strcmp(data, "ADIAGMALL"))
-+  {
-+    printk("TX Mdelay All tone\n");
-+    tn7dsl_adiag(1,analogAllTonesTestArray);
-+    return;
-+  }
-+  if(!strcmp(data, "ADIAGMNONE"))
-+  {
-+    printk("TX Mdelay No tone\n");
-+    tn7dsl_adiag(1,analogNoTonesTestArray);
-+    return;
-+  }
-+  if(!strcmp(data, "ADIAGMEVEN"))
-+  {
-+    printk("TX Mdelay Even tone\n");
-+    tn7dsl_adiag(1,analogEvenTonesTestArray);
-+    return;
-+  }
-+  if(!strcmp(data, "ADIAGMODD"))
-+  {
-+    printk("TX Mdelay Odd tone\n");
-+    tn7dsl_adiag(1,analogOddTonesTestArray);
-+    return;
-+  }
-+  if(!strcmp(data, "ADIAGQUIET"))
-+  {
-+    dslhal_api_sendIdle(pIhw);
-+    return;
-+  }
-+  if(!strncmp(data, "ADIAGRN", 7))
-+  {
-+    char tones[64], tmp[4];
-+    int  nth, i;
-+    
-+    tmp[0]=data[7];
-+    tmp[1]=data[8];
-+    tmp[2]=data[9];
-+    
-+    nth = os_atoi(tmp);
-+
-+    for(i=0;i<64;i++)
-+    {
-+      if(((i+1)% nth)==0)
-+      {
-+        tones[i]=0;
-+      }
-+      else
-+      {
-+        tones[i]=1;
-+      }
-+    }
-+    printk("TX Reverb with %dth tones missing.\n", nth);
-+    tn7dsl_adiag(0,tones);
-+    return;
-+  }
-+  if(!strncmp(data, "ADIAGMN", 7))
-+  {
-+    char tones[64], tmp[4];
-+    int  nth, i;
-+
-+    tmp[0]=data[7];
-+    tmp[1]=data[8];
-+    tmp[2]=data[9];
-+    nth = os_atoi(tmp);
-+
-+    for(i=0;i<64;i++)
-+    {
-+      if(((i+1)% nth)==0)
-+      {
-+        tones[i]=0;
-+      }
-+      else
-+      {
-+        tones[i]=1;
-+      }
-+    }
-+    printk("TX Mdelay with %dth tones missing.\n", nth);
-+    tn7dsl_adiag(1,tones);
-+    return;
-+  }
-+
-+
-+}
-+
-+#endif
-+
-+static void 
-+tn7dsl_chng_modulation(void* data)
-+{
-+  //printk("DSL Modem Retraining\n");
-+  
-+  if(!strcmp(data, "T1413"))
-+  {
-+    printk("retraining in T1413 mode\n");
-+    dslhal_api_setTrainingMode(pIhw, T1413_MODE);
-+    dslhal_api_sendQuiet(pIhw);
-+    return;
-+  }
-+  if(!strcmp(data, "GDMT"))
-+  {
-+    dslhal_api_setTrainingMode(pIhw, GDMT_MODE);
-+    dslhal_api_sendQuiet(pIhw);
-+    return;
-+  }
-+  if(!strcmp(data, "GLITE"))
-+  {
-+    dslhal_api_setTrainingMode(pIhw, GLITE_MODE);
-+    dslhal_api_sendQuiet(pIhw);
-+    return;
-+  }
-+  if(!strcmp(data, "MMODE"))
-+  {
-+    dslhal_api_setTrainingMode(pIhw, MULTI_MODE);
-+    dslhal_api_sendQuiet(pIhw);
-+    return;
-+  }
-+  if(!strcmp(data, "NMODE"))
-+  {
-+    dslhal_api_setTrainingMode(pIhw, NO_MODE);
-+    dslhal_api_sendQuiet(pIhw);
-+    return;
-+  }
-+
-+#ifdef ADIAG
-+  tn7dsl_diagnostic_test(data);
-+#endif
-+
-+
-+  return;
-+}
-+
-+#ifdef CONFIG_LED_MODULE
-+static void tn7dsl_led_on(unsigned long parm)
-+{
-+  dslhal_api_configureLed(pIhw,parm, 0);
-+}
-+
-+
-+static void tn7dsl_led_off(unsigned long parm)
-+{
-+  dslhal_api_configureLed(pIhw,parm, 1);
-+}
-+
-+static void tn7dsl_led_init(unsigned long parm)
-+{
-+  dslhal_api_configureLed(pIhw,parm, 2);
-+}
-+#endif
-+
-+static void tn7dsl_register_dslss_led(void)
-+{
-+#ifdef CONFIG_LED_MODULE
-+    
-+    // register led0 with led module
-+    ledreg[0].param = 0;
-+    ledreg[0].init = (void *)tn7dsl_led_init;
-+    ledreg[0].onfunc = (void *)tn7dsl_led_on;
-+    ledreg[0].offfunc = (void *)tn7dsl_led_off;
-+    register_led_drv(LED_NUM_1, &ledreg[0]);
-+
-+    // register led1 output with led module
-+    ledreg[1].param = 1;
-+    ledreg[1].init = (void *)tn7dsl_led_init;
-+    ledreg[1].onfunc = (void *)tn7dsl_led_on;
-+    ledreg[1].offfunc = (void *)tn7dsl_led_off;
-+    register_led_drv(LED_NUM_2, &ledreg[1]);
-+#endif  
-+}
-+
-+static int tn7dsl_reload_overlay(void)
-+{
-+  int overlayFlag;
-+  spinlock_t overlayLock;
-+
-+  init_kthread(&overlay_thread, "adsl");
-+  down(&adsl_sem_overlay);
-+  while(1)
-+  {
-+    mdelay(500);
-+    if(pIhw->lConnected == 0)
-+    {
-+      spin_lock_irqsave(&overlayLock, overlayFlag);
-+      dslhal_support_restoreTrainingInfo(pIhw);
-+      spin_unlock_irqrestore(&overlayLock, overlayFlag);
-+    }
-+    down(&adsl_sem_overlay);
-+  }
-+  return 0;
-+}
-+
-+
-+
-+
-diff -urN linux.old/drivers/atm/sangam_atm/tn7sar.c linux.dev/drivers/atm/sangam_atm/tn7sar.c
---- linux.old/drivers/atm/sangam_atm/tn7sar.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/tn7sar.c	2005-08-23 04:46:50.110841720 +0200
-@@ -0,0 +1,1376 @@
-+/******************************************************************************
-+ * FILE PURPOSE:    OS files for CPSAR
-+ ******************************************************************************
-+ * FILE NAME:       tn7sar.c
-+ *
-+ * DESCRIPTION:     This file contains source for required os files for CPSAR
-+ * 
-+ * (C) Copyright 2002, Texas Instruments Inc
-+ *
-+ *
-+ * Revision History:
-+ * 0/11/02         Zhicheng Tang, created.
-+ *
-+ *******************************************************************************/
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/atmdev.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+#include <linux/smp_lock.h>
-+#include <asm/io.h>
-+#include <asm/mips-boards/prom.h>
-+#include <linux/proc_fs.h>
-+#include <linux/string.h>
-+#include <linux/ctype.h>
-+
-+
-+#define _CPHAL_AAL5
-+#define _CPHAL_SAR
-+#define _CPHAL_HAL
-+typedef void OS_PRIVATE;
-+typedef void OS_DEVICE;
-+typedef void OS_SENDINFO;
-+typedef void OS_RECEIVEINFO;
-+typedef void OS_SETUP;
-+
-+#include "cpswhal_cpsar.h"
-+#include "tn7atm.h"
-+#include "tn7api.h"
-+
-+
-+/* PDSP Firmware files */
-+#include "tnetd7300_sar_firm.h"
-+
-+
-+enum
-+{
-+  PACKET_TYPE_AAL5,
-+  PACKET_TYPE_NULL,
-+  PACKET_TYPE_OAM,
-+  PACKET_TYPE_TRANS,
-+  PACKET_TYPE_AAL2
-+}PACKET_TYPE;
-+
-+enum
-+{
-+  OAM_PING_FAILED,
-+  OAM_PING_SUCCESS,
-+  OAM_PING_PENDING,
-+  OAM_PING_NOT_STARTED
-+}OAM_PING;
-+
-+/* PDSP OAM General Purpose Registers (@todo: These need to be used in the HAL!) */
-+
-+#define SAR_PDSP_HOST_OAM_CONFIG_REG_ADDR 0xa3000020
-+#define SAR_PDSP_OAM_CORR_REG_ADDR        0xa3000024
-+#define SAR_PDSP_OAM_LB_RESULT_REG_ADDR   0xa3000028
-+#define SAR_PDSP_OAM_F5LB_COUNT_REG_ADDR  0xa300002c
-+#define SAR_PDSP_OAM_F4LB_COUNT_REG_ADDR  0xa3000030
-+
-+#define SAR_FREQUNCY 50000000
-+
-+#define AAL5_PARM "id=aal5, base = 0x03000000, offset = 0, int_line=15, ch0=[RxBufSize=1522; RxNumBuffers = 32; RxServiceMax = 50; TxServiceMax=50; TxNumBuffers=32; CpcsUU=0x5aa5; TxVc_CellRate=0x3000; TxVc_AtmHeader=0x00000640]"
-+#define SAR_PARM "id=sar,base = 0x03000000, reset_bit = 9, offset = 0; UniNni = 0, PdspEnable = 1"
-+#define RESET_PARM "id=ResetControl, base=0xA8611600"
-+#define CH0_PARM "RxBufSize=1522, RxNumBuffers = 32, RxServiceMax = 50, TxServiceMax=50, TxNumBuffers=32, CpcsUU=0x5aa5, TxVc_CellRate=0x3000, TxVc_AtmHeader=0x00000640"
-+
-+#define MAX_PVC_TABLE_ENTRY 16
-+
-+sar_stat_t sarStat;
-+ 
-+typedef struct _channel_parm
-+{
-+  unsigned int     RxBufSize;
-+  unsigned int     RxNumBuffers;
-+  unsigned int     RxServiceMax;
-+  unsigned int     TxServiceMax;
-+  unsigned int     TxNumBuffers;
-+  unsigned int     CpcsUU;
-+  unsigned int     TxVc_CellRate;
-+  unsigned int     TxVc_AtmHeader;
-+}channel_parm_t;
-+
-+typedef struct _aal5_parm
-+{
-+  unsigned int        base;
-+  unsigned int        offset;
-+  unsigned int        int_line;
-+  channel_parm_t      chan[8];
-+}aal5_parm_t;
-+
-+
-+typedef struct _sar_parm
-+{
-+  unsigned int        base;
-+  unsigned int        reset_bit;
-+  unsigned int        offset;
-+  unsigned int        UniNni;
-+}sar_parm_t;
-+
-+typedef struct _pvc_table
-+{
-+  int bInUse;
-+  int vpi;
-+  int vci;
-+}pvc_table;
-+
-+static aal5_parm_t aal5Parm;
-+static sar_parm_t  sarParm;
-+static char *pAal5, *pSar, *pReset;
-+static int oam_type;
-+static unsigned int oamPingStatus;
-+static int oamAtmHdr;
-+static int oamLbTimeout;
-+static char parm_data[1024];
-+static char aal5Data[1024];
-+static char sarData[1024];
-+static char resetData[256];
-+static pvc_table pvc_result[MAX_PVC_TABLE_ENTRY];
-+
-+/* external function */
-+extern int __guDbgLevel;
-+
-+/* gloabal function */
-+unsigned int oamFarLBCount[4];
-+/* end of gloabal function */
-+
-+/* internal APIs */
-+static int tn7sar_atm_header(int vpi, int vci);
-+static void tn7sar_record_pvc(int atmheader);
-+
-+/*end of internal APIs */
-+spinlock_t sar_lock;
-+
-+/* HAL OS support functions */
-+
-+
-+unsigned long tn7sar_strtoul(const char *str, char **endptr, int base)
-+{
-+  unsigned long ret;
-+
-+  ret= simple_strtoul(str, endptr, base); 
-+  return ret;
-+}
-+
-+static void *tn7sar_malloc(unsigned int size)
-+{
-+  return(kmalloc(size, GFP_KERNEL));
-+}
-+
-+static unsigned long lockflags;
-+static void tn7sar_critical_on(void)
-+{
-+  spin_lock_irqsave(&sar_lock,lockflags);
-+}
-+
-+static void tn7sar_critical_off(void)
-+{
-+  spin_unlock_irqrestore(&sar_lock,lockflags);
-+}
-+
-+static void tn7sar_data_invalidate(void *pmem, int size)
-+{
-+  unsigned int i,Size=(((unsigned int)pmem)&0xf)+size;
-+
-+  for (i=0;i<Size;i+=16,pmem+=16)
-+  {
-+    __asm__(" .set mips3 ");
-+    __asm__("cache  17, (%0)" : : "r" (pmem));
-+    __asm__(" .set mips0 ");
-+  }
-+
-+}
-+
-+static void tn7sar_data_writeback(void *pmem, int size)
-+{
-+  unsigned int i,Size=(((unsigned int)pmem)&0xf)+size;
-+
-+  for (i=0;i<Size;i+=16,pmem+=16)
-+  {
-+    __asm__(" .set mips3 ");
-+    __asm__(" cache  25, (%0)" : : "r" (pmem));
-+    __asm__(" .set mips0 ");
-+  }
-+}
-+
-+
-+static int 
-+tn7sar_find_device(int unit, const char *find_name, void *device_info)
-+{
-+  int ret_val = 0;
-+  char **ptr;
-+
-+  ptr = (char **)device_info;
-+  dprintf(3,"tn7sar_find_device\n");
-+  if(strcmp(find_name, "aal5")==0)
-+  {
-+    //dprintf(4,"pAal5=%s\n", pAal5);
-+    *ptr = pAal5;
-+  }
-+  else if(strcmp(find_name, "sar")==0)
-+  {
-+    dprintf(3, "pSar=%s\n", pSar);
-+    *ptr = pSar;
-+  }  
-+  else if(strcmp(find_name, "reset")==0)
-+  {
-+    dprintf(3, "pReset=%s\n", pReset);
-+    *ptr = pReset;
-+  }
-+
-+  device_info = NULL;
-+
-+  return(ret_val);
-+}
-+
-+static int 
-+tn7sar_get_device_parm_uint(void *dev_info, const char *param, unsigned int *value)
-+{
-+  char *dev_str;
-+  char *pMatch;
-+  int i=0, j=0;
-+  char val_str[64];
-+  unsigned int val;
-+  int base = 10;
-+
-+  dprintf(6, "tn7sar_get_device_parm_uint()\n");
-+
-+  dev_str = (char *)dev_info;
-+  dprintf(3, "parm=%s\n", param);
-+  pMatch = strstr(dev_str, param);
-+  //dprintf(4, "pMatch=%s\n", pMatch);
-+  if(pMatch)
-+  {
-+    //get "=" position
-+    while(pMatch[i] != 0x3d)
-+    {
-+      i++;
-+    }
-+    i++;
-+    // get rid of spaces
-+    while(pMatch[i]==0x20)
-+    {
-+      i++;
-+    }
-+    //get rid of 0x
-+    if(pMatch[i]==0x30)
-+    {
-+      if(pMatch[i+1] == 0x58 || pMatch[i+1] == 0x78)
-+      {
-+        i+=2;
-+        base = 16;
-+      }
-+    }
-+
-+    // get next delineator
-+    while(pMatch[i] != 0x2c && pMatch[i] != 0x0)
-+    {
-+      val_str[j]=pMatch[i];
-+      j++;
-+      i++;
-+    }
-+    val_str[j]=0;
-+    //dprintf(4, "val_str=\n%s\n", val_str);
-+    //xdump(val_str, strlen(val_str) + 1, 4);
-+    val = simple_strtoul(val_str, (char **)NULL, base);
-+    dprintf(4, "val =%d\n", val);
-+    *value = val;
-+    return 0;
-+  }
-+
-+
-+  dprintf(3, "match not found.\n");
-+  if(strcmp(dev_str, "debug")==0)
-+  {
-+    dprintf(6,"debug..\n");
-+    *value = 6;
-+    return 0;
-+  }
-+  return (1);
-+}
-+
-+static int tn7sar_get_device_parm_value(void *dev_info, const char *param, void *value)
-+{
-+  char *dev_str;
-+  char *pMatch;
-+  int i=0, j=0;
-+  char *pVal;
-+
-+  
-+  dprintf(3, "tn7sar_get_device_parm_value().\n");
-+  
-+  pVal = (char *) parm_data;
-+  dev_str = (char *)dev_info;
-+  dprintf(3, "dev_info: \n%s\n", dev_str);
-+  dprintf(3, "param=%s\n", param);
-+  if(strcmp(param, "Ch0")==0)
-+  {
-+    *(char **)value = CH0_PARM;
-+    dprintf(3, "value =%s\n", *(char **)value);
-+    return 0;
-+  }
-+
-+  pMatch = strstr(dev_str, param);
-+  if(pMatch)
-+  {
-+    //get "=" position
-+    while(pMatch[i] != 0x3d)
-+    {
-+      i++;
-+    }
-+    i++;
-+    // get rid of spaces
-+    while(pMatch[i]==0x20)
-+    {
-+      i++;
-+    }
-+
-+    if(pMatch[i] != 0x5b) //"["
-+    {
-+      // get next delineator
-+      while(pMatch[i] != 0x2c && pMatch[i] != 0x0)
-+      {
-+        pVal[j] = pMatch[i];
-+        j++;
-+        i++;
-+      }
-+      pVal[j]=0;
-+
-+      *(char **)value = pVal;
-+      return 0;
-+    }
-+    else
-+    {
-+      i++; //skip "["
-+      while(pMatch[i] != 0x5d)
-+      {
-+        if(pMatch[i] == 0x3b) //";"
-+          pVal[j] = 0x2c;
-+        else
-+          pVal[j] = pMatch[i];
-+        j++;
-+        i++;
-+      }
-+      pVal[j] = 0;
-+      *(char **)value = pVal;
-+      return 0;
-+    }
-+ 
-+  }
-+  
-+  return (1);
-+}
-+
-+static void tn7sar_free(void *pmem)
-+{
-+    kfree(pmem);
-+}
-+
-+static void 
-+tn7sar_free_buffer(OS_RECEIVEINFO *os_receive_info, void *pmem)
-+{
-+  tn7atm_free_rx_skb(os_receive_info);
-+}
-+
-+static void tn7sar_free_dev(void *pmem)
-+{
-+  kfree(pmem);
-+}
-+
-+static void tn7sar_free_dma_xfer(void *pmem)
-+{
-+  kfree(pmem);
-+}
-+
-+
-+static int
-+tn7sar_control(void *dev_info, const char *key, const char *action, void *value)
-+{
-+        int ret_val = -1;
-+
-+  if (strcmp(key, "Firmware") == 0)
-+  {
-+    if (strcmp(action, "Get") == 0)
-+    {
-+      *(int **)value = &SarPdspFirmware[0];
-+    }
-+    ret_val=0;
-+  }
-+        
-+  if (strcmp(key, "FirmwareSize") == 0)
-+  {
-+    if (strcmp(action, "Get") == 0)
-+    {       
-+      *(int *)value = sizeof(SarPdspFirmware);
-+    }
-+    ret_val=0;
-+  }
-+  
-+  if (strcmp(key, "OamLbResult") == 0)
-+  {
-+    dprintf(2, "get looback source call back\n");
-+    if (strcmp(action, "Set") == 0)
-+    {       
-+      dprintf(2, "oam result = %d\n", *(unsigned int *)value);
-+      oamFarLBCount[oam_type] = oamFarLBCount[oam_type] + *(unsigned int *)value;
-+      if(oamPingStatus == OAM_PING_PENDING)
-+      {
-+        oamPingStatus = *(unsigned int *)value;
-+        if(oamPingStatus == OAM_PING_SUCCESS)
-+        {
-+          /* record pvc */
-+          tn7sar_record_pvc(oamAtmHdr);
-+        }
-+      }
-+      
-+    }
-+    ret_val=0;
-+  }
-+  
-+  if (strcmp(key, "SarFreq") == 0)
-+  {
-+    if (strcmp(action, "Get") == 0)
-+    {       
-+      *(int *)value = SAR_FREQUNCY;
-+    }
-+    ret_val=0;
-+  }
-+  return(ret_val);
-+}
-+
-+
-+static void
-+tn7sar_sarhal_isr_register(OS_DEVICE *os_dev, int(*hal_isr)(HAL_DEVICE *, int *), int interrupt_num)
-+{
-+  tn7atm_sarhal_isr_register(os_dev, hal_isr, interrupt_num);
-+}
-+
-+static void 
-+tn7sar_isr_unregister(OS_DEVICE *os_dev, int interrupt_num)
-+{
-+    /* TODO */
-+}
-+
-+
-+static void *
-+tn7sar_malloc_rxbuffer(unsigned int size, void *mem_base, unsigned int mem_range, HAL_DEVICE *hal_dev, 
-+                       HAL_RECEIVEINFO *hal_info, OS_RECEIVEINFO **os_receive_info, OS_DEVICE *os_dev)
-+{
-+   return tn7atm_allocate_rx_skb(os_dev, os_receive_info, size);
-+}
-+
-+static void *
-+tn7sar_malloc_dev(unsigned int size)
-+{
-+  return(kmalloc(size, GFP_KERNEL));
-+}
-+
-+static void *
-+tn7sar_malloc_dma_xfer(unsigned int size, void *mem_base, unsigned int mem_range)
-+{
-+  dprintf(4, "tn7sar_malloc_dma_xfer, size =%d\n", size);
-+
-+  return (kmalloc(size, GFP_DMA |GFP_KERNEL));
-+  
-+}
-+
-+static void * 
-+tn7sar_memset(void *dst, int set_char, size_t count)
-+{
-+    return (memset(dst, set_char, count));
-+}
-+
-+static int tn7sar_printf(const char *format, ...)
-+{
-+  /* TODO: add debug levels */
-+  static char buff[256];
-+  va_list  ap; 
-+
-+  va_start( ap, format); 
-+  vsprintf((char *)buff, format, ap); 
-+  va_end(ap); 
-+
-+  printk("SAR HAL: %s\n", buff);
-+  return(0);
-+}
-+
-+static void tn7sar_record_pvc(int atmheader)
-+{
-+  int vci,vpi;
-+  int i;
-+
-+  vci = 0xffff & (atmheader >> 4);
-+  vpi = 0xff & (atmheader >> 20);
-+  for(i=0;i<MAX_PVC_TABLE_ENTRY;i++)
-+  {
-+    if(pvc_result[i].bInUse)
-+    {
-+      if(pvc_result[i].vpi == vpi && pvc_result[i].vci == vci)
-+      {
-+        return;
-+      }
-+    }
-+  }
-+  for(i=0;i<MAX_PVC_TABLE_ENTRY;i++)
-+  {
-+    if(pvc_result[i].bInUse == 0)
-+    {
-+      pvc_result[i].bInUse = 1;
-+      pvc_result[i].vpi = vpi;
-+      pvc_result[i].vci = vci;
-+      return;
-+    }
-+  }
-+  return;
-+}
-+
-+static void tn7sar_clear_pvc_table(void)
-+{
-+  int i;
-+ 
-+  for(i=0;i<MAX_PVC_TABLE_ENTRY; i++)
-+  {
-+    pvc_result[i].bInUse = 0;
-+    pvc_result[i].vpi = 0;
-+    pvc_result[i].vci = 0;
-+  }
-+}
-+
-+int tn7sar_process_unmatched_oam(FRAGLIST *frag_list, unsigned int frag_count, unsigned int packet_size, unsigned int mode)
-+{
-+
-+  FRAGLIST *local_list;
-+  int i;
-+  unsigned int atmHdr;
-+
-+  local_list = frag_list;
-+
-+  for(i=0;i<(int)frag_count;i++)
-+  {
-+    tn7sar_data_invalidate(local_list->data, (int)local_list->len);
-+    local_list ++;
-+  }
-+  local_list = frag_list;
-+  if((mode>>31)) /*vci, vpi is attached */
-+  {
-+    atmHdr = *(unsigned int *)frag_list->data;
-+    tn7sar_record_pvc(atmHdr);
-+    if(atmHdr & 0x8) //oam cell
-+    {
-+      atmHdr &= 0xfffffff0;
-+      if(atmHdr == oamAtmHdr)
-+      {
-+        if(oamPingStatus == OAM_PING_PENDING)
-+        {
-+          oamPingStatus = OAM_PING_SUCCESS;
-+          oamFarLBCount[oam_type] = oamFarLBCount[oam_type] + 1;
-+        }
-+        return 0;
-+      }
-+    }
-+  }
-+ 
-+  return 0;
-+}
-+
-+
-+static int 
-+tn7sar_receive(OS_DEVICE *os_dev,FRAGLIST *frag_list, unsigned int frag_count, unsigned int packet_size, 
-+                 HAL_RECEIVEINFO *hal_receive_info, unsigned int mode)
-+{   
-+  int ch;
-+  struct atm_dev *dev;
-+  Tn7AtmPrivate *priv;
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+  int bRet;
-+
-+
-+  dprintf(4, "tn7sar_receive\n");
-+
-+  dev = (struct atm_dev *)os_dev;
-+  priv= (Tn7AtmPrivate *)dev->dev_data;
-+  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+  
-+  /* Mode contains channel info */
-+  ch = (mode & 0xFF);
-+ 
-+  if(ch == 15)
-+  {
-+    tn7sar_process_unmatched_oam(frag_list, frag_count, packet_size, mode);
-+    pHalFunc->RxReturn(hal_receive_info, 0);
-+    return 0;
-+  }
-+
-+  if(frag_count > 1 || frag_list->len == 0)
-+  {
-+    printk("Packet fragment count > 1, not handdle.\n");
-+    return 1;
-+  }
-+ 
-+  tn7sar_data_invalidate(frag_list->data, (int)frag_list->len);
-+  bRet=tn7atm_receive(os_dev, ch, packet_size, frag_list->OsInfo, frag_list->data);
-+
-+  if(bRet==0)
-+  {
-+    sarStat.rxPktCnt++;
-+    sarStat.rxBytes += packet_size;
-+    pHalFunc->RxReturn(hal_receive_info, 1);
-+  }
-+  else
-+  {
-+    pHalFunc->RxReturn(hal_receive_info, 0);
-+  }
-+
-+  return bRet;
-+}
-+
-+static int 
-+tn7sar_send_complete(OS_SENDINFO *osSendInfo)
-+{  
-+  return (tn7atm_send_complete(osSendInfo));
-+}
-+
-+void
-+tn7sar_teardown_complete(OS_DEVICE *OsDev, int ch, int Dir)
-+{
-+  return;
-+}
-+  
-+
-+/*
-+unsigned int tn7sar_virt(unsigned int address)
-+{
-+  return phys_to_virt(address);
-+}
-+*/
-+
-+int tn7sar_init_module(OS_FUNCTIONS *os_funcs)
-+{
-+  dprintf(4, "tn7sar_init_module\n");
-+  if( os_funcs == 0 )
-+  {
-+    return(-1);   
-+  }
-+  os_funcs->Control                  = tn7sar_control;
-+  os_funcs->CriticalOn               = tn7sar_critical_on;
-+  os_funcs->CriticalOff              = tn7sar_critical_off;
-+  os_funcs->DataCacheHitInvalidate   = tn7sar_data_invalidate;
-+  os_funcs->DataCacheHitWriteback    = tn7sar_data_writeback;
-+  os_funcs->DeviceFindInfo           = tn7sar_find_device;
-+  os_funcs->DeviceFindParmUint       = tn7sar_get_device_parm_uint;
-+  os_funcs->DeviceFindParmValue      = tn7sar_get_device_parm_value;
-+  os_funcs->Free                     = tn7sar_free;
-+  os_funcs->FreeRxBuffer             = tn7sar_free_buffer;
-+  os_funcs->FreeDev                  = tn7sar_free_dev;
-+  os_funcs->FreeDmaXfer              = tn7sar_free_dma_xfer;
-+  os_funcs->IsrRegister              = tn7sar_sarhal_isr_register;
-+  os_funcs->IsrUnRegister            = tn7sar_isr_unregister;
-+  os_funcs->Malloc                   = tn7sar_malloc;
-+  os_funcs->MallocRxBuffer           = tn7sar_malloc_rxbuffer;
-+  os_funcs->MallocDev                = tn7sar_malloc_dev;
-+  os_funcs->MallocDmaXfer            = tn7sar_malloc_dma_xfer;
-+  os_funcs->Memset                   = tn7sar_memset;
-+  os_funcs->Printf                   = tn7sar_printf;
-+  os_funcs->Receive                  = tn7sar_receive;
-+  os_funcs->SendComplete             = tn7sar_send_complete;
-+  os_funcs->Strcmpi                  = strcmp;
-+  os_funcs->Sprintf                  = sprintf;
-+  os_funcs->Strlen                   = strlen;
-+  os_funcs->Strstr                   = strstr;
-+  os_funcs->Strtoul                  = tn7sar_strtoul;
-+  os_funcs->TeardownComplete         = tn7sar_teardown_complete;
-+    
-+  return(0);
-+}
-+
-+
-+static void tn7sar_init_dev_parm(void)
-+{
-+  int i;
-+  
-+  
-+  /* aal5 */
-+  //strcpy(aal5Parm.id, "aal5");
-+  aal5Parm.base = 0x03000000;
-+  aal5Parm.offset = 0;
-+  aal5Parm.int_line=15;
-+  aal5Parm.chan[0].RxBufSize=1600;
-+  aal5Parm.chan[0].RxNumBuffers = 32;
-+  aal5Parm.chan[0].RxServiceMax = 50;
-+  aal5Parm.chan[0].TxServiceMax=50;
-+  aal5Parm.chan[0].TxNumBuffers=32;
-+  aal5Parm.chan[0].CpcsUU=0x5aa5;
-+  aal5Parm.chan[0].TxVc_CellRate=0x3000;
-+  aal5Parm.chan[0].TxVc_AtmHeader=0x00000640;
-+  for(i=1;i<8;i++)
-+  {
-+    memcpy(&aal5Parm.chan[i], &aal5Parm.chan[0], sizeof(aal5Parm.chan[0]));
-+  }
-+  
-+
-+  /* sar */
-+  //strcpy(sarParm.id, "sar");
-+  sarParm.base = 0x03000000;
-+  sarParm.reset_bit = 9;
-+  sarParm.offset = 0;
-+  sarParm.UniNni = 0;
-+
-+  pAal5 = aal5Data;
-+  pSar  = sarData;
-+  pReset = resetData;
-+  strcpy(pAal5, AAL5_PARM);
-+  strcpy(pSar, SAR_PARM);
-+  strcpy(pReset, RESET_PARM);
-+
-+}
-+
-+ 
-+int tn7sar_get_stats(void *priv1)
-+{
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+  Tn7AtmPrivate *priv;
-+  int i, j;
-+  unsigned int *pSarStat, *pStateBase;
-+  char statString[64];
-+  int len;
-+  
-+  dprintf(2, "tn7sar_get_stats\n");
-+
-+  priv = (Tn7AtmPrivate *)priv1;
-+  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+  //memset(&sarStat, 0, sizeof(sarStat));
-+  sarStat.txErrors = 0;
-+  sarStat.rxErrors = 0;
-+  for(i=0;i<MAX_DMA_CHAN;i++)
-+  {
-+    if(priv->lut[i].inuse)
-+    {
-+      for(j=0;j<1;j++)
-+      {
-+        len=sprintf(statString, "Stats;0;%d", priv->lut[i].chanid);
-+        statString[len]=0;
-+        dprintf(2, "statString=%s\n",statString);
-+        pHalFunc->Control(pHalDev, statString, "Get", &pSarStat);
-+        pStateBase = pSarStat;
-+        while(pSarStat)
-+        {
-+          if((char *)*pSarStat == NULL)
-+            break;
-+          dprintf(2, "%s\n", (char *) *pSarStat);
-+          pSarStat++;
-+          dprintf(2, "%s\n", (char *) *pSarStat);
-+          sarStat.rxErrors += os_atoul((char *) *pSarStat);
-+          pSarStat++;
-+        }
-+          
-+        kfree(pStateBase);
-+      }
-+    }
-+  }
-+  return 0;
-+}
-+          
-+int tn7sar_setup_oam_channel(Tn7AtmPrivate *priv)
-+{
-+
-+  CHANNEL_INFO chInfo;
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+  int chan=15;  
-+  dprintf(4, "tn7sar_setup_oam_channel\n");
-+
-+  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+  memset(&chInfo, 0xff, sizeof(chInfo));
-+
-+  /* channel specific */
-+  chInfo.Channel = 15; /* hardcoded for last channel */
-+  chInfo.Direction = 0;
-+  chInfo.Vci = 30; /* just need below 32 */
-+  chInfo.Vpi = 0;
-+  chInfo.TxVc_QosType = 2;
-+
-+  /*default */
-+  chInfo.PktType      = PACKET_TYPE_TRANS;
-+  chInfo.TxServiceMax = 2;
-+  chInfo.RxServiceMax = 2;
-+  chInfo.TxNumQueues  = 1;
-+  chInfo.TxNumBuffers = 4;
-+  chInfo.RxNumBuffers = 4;
-+  chInfo.RxBufSize    = 256;
-+  chInfo.RxVc_OamToHost = 0;
-+  chInfo.RxVp_OamToHost = 0;
-+  chInfo.FwdUnkVc       = 1; //enable forwarding of unknown vc
-+  chInfo.TxVc_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, chInfo.Vci);
-+  chInfo.RxVc_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, chInfo.Vci);
-+  chInfo.TxVp_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, 0);
-+  chInfo.RxVp_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, 0);
-+
-+  dprintf(4, "TxVc_AtmHeader=0x%x\n", chInfo.TxVc_AtmHeader);
-+
-+  if(pHalFunc->ChannelSetup(pHalDev, &chInfo, NULL))
-+  {
-+    printk("failed to setup channel =%d.\n", chan);
-+    return -1;
-+  }
-+ 
-+  // claiming the channel
-+  priv->lut[chan].vpi = 0;
-+  priv->lut[chan].vci = 30;
-+  priv->lut[chan].chanid = chan;
-+  priv->lut[chan].inuse = 1;   
-+  return 0;
-+}
-+
-+int tn7sar_init(struct atm_dev *dev, Tn7AtmPrivate *priv)
-+{
-+  int retCode;
-+  int hal_funcs_size;
-+ 
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+  OS_FUNCTIONS  *pOsFunc;
-+  int oamMod;
-+  char *pLbTimeout;
-+  int lbTimeout;
-+
-+
-+  dprintf(4, "tn7sar_init\n");
-+
-+  pOsFunc = (OS_FUNCTIONS  *)kmalloc(sizeof(OS_FUNCTIONS), GFP_KERNEL);
-+
-+  
-+  priv->pSarOsFunc = ( void *)pOsFunc;
-+
-+  /* init boot parms */
-+  tn7sar_init_dev_parm();
-+
-+  /* init sar os call back functions */
-+  retCode = tn7sar_init_module(pOsFunc);
-+  if (retCode != 0) /* error */
-+  {
-+    printk("Failed to init SAR OS Functions\n");
-+    return (1);
-+  }
-+                
-+        /* Init sar hal */
-+  retCode = cpaal5InitModule(&pHalDev, (OS_DEVICE*) dev, &pHalFunc, 
-+                               pOsFunc, sizeof(OS_FUNCTIONS), &hal_funcs_size, 0);
-+  if (retCode != 0) /* error */
-+  {
-+    printk("Failed to init SAR HAL\n");
-+    return (1);
-+  }
-+
-+  /* sanity check */
-+  if (pHalDev == NULL || pHalFunc == NULL || hal_funcs_size != sizeof(HAL_FUNCTIONS) )
-+  {
-+    printk("Invalid SAR hal and/or functions.\n");
-+    return (1);
-+  }
-+   
-+  /* remeber HAL pointers */
-+  priv->pSarHalDev = (void *)pHalDev;
-+  priv->pSarHalFunc = (void *)pHalFunc;
-+
-+        /* Probe for the Device to get hardware info from driver */
-+  retCode = pHalFunc->Probe(pHalDev);
-+  if (retCode !=0)
-+  {
-+    printk("SAR hal probing error.\n");
-+    return (1);
-+  }
-+
-+  /* init sar hal */
-+  retCode = pHalFunc->Init(pHalDev);
-+  if (retCode != 0) /* error */
-+  {
-+    
-+    printk("pHalFunc->Init failed. err code =%d\n", retCode);
-+    return (1);
-+  }
-+
-+  /* open hal module */
-+  retCode = pHalFunc->Open(pHalDev);
-+  if (retCode != 0) /* error */
-+  {
-+     printk("pHalFunc->open failed, err code: %d\n",retCode ); 
-+     return (1);
-+  }
-+
-+  /* init sar for firmware oam */
-+  oamMod= 1;
-+  pHalFunc->Control(pHalDev,"OamMode", "Set", &oamMod);
-+
-+  /* read in oam lb timeout value */
-+  pLbTimeout = prom_getenv("oam_lb_timeout");
-+  if(pLbTimeout)
-+  {
-+    lbTimeout =tn7sar_strtoul(pLbTimeout, NULL, 10);
-+    oamLbTimeout = lbTimeout;
-+    pHalFunc->Control(pHalDev,"OamLbTimeout", "Set", &lbTimeout);
-+  }
-+  else
-+  {
-+    oamLbTimeout = 5000;
-+  }
-+
-+  oamFarLBCount[0]=0;
-+  oamFarLBCount[1]=0;
-+  oamFarLBCount[2]=0;
-+  oamFarLBCount[3]=0;
-+
-+  memset(&sarStat, 0 , sizeof(sarStat));
-+
-+  /* setup channel 15 for oam operation */
-+  tn7sar_setup_oam_channel(priv);
-+  dprintf(4, "tn7sar_init done");
-+  return 0;
-+}
-+
-+static int
-+tn7sar_atm_header(int vpi, int vci)
-+{
-+  union
-+  {
-+    unsigned char byte[4];
-+    unsigned int  dword;
-+  }atm_h;
-+  int itmp = 0;
-+
-+  //vci 
-+  itmp = vci &0xf;
-+  atm_h.byte[0] = 0;
-+  atm_h.byte[0] |= (itmp << 4);
-+  atm_h.byte[1] = ((vci & 0xff0) >> 4);
-+  atm_h.byte[2] = 0;
-+  atm_h.byte[2] |= ((vci & 0xf000) >>12);;
-+  atm_h.byte[2] |= ((vpi & 0xf) << 4);
-+  atm_h.byte[3] = 0;
-+  atm_h.byte[3] = ((vpi & 0xff0) >> 4);
-+  return atm_h.dword;
-+}
-+
-+int tn7sar_activate_vc(Tn7AtmPrivate *priv, short vpi, int vci, int pcr, int scr, int mbs, int cdvt, int chan, int qos)
-+{
-+  CHANNEL_INFO chInfo;
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+  
-+  dprintf(4, "tn7sar_activate_vc\n");
-+
-+  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+  memset(&chInfo, 0xff, sizeof(chInfo));
-+
-+  /* channel specific */
-+  chInfo.Channel = chan;
-+  chInfo.Direction = 0;
-+  chInfo.Vci = vci;
-+  chInfo.Vpi = vpi;
-+  chInfo.TxVc_QosType = qos;
-+  chInfo.Priority = qos;
-+  
-+  if(chInfo.TxVc_QosType == 1) /* if the connection is VBR than set the DaMask value to tell the schedular to accumalte the credit */
-+  {
-+    chInfo.DaMask = 1;
-+  }  
-+  chInfo.TxVc_Mbs = mbs; /* use pcr as MBS */
-+  pcr = SAR_FREQUNCY/pcr;
-+  scr = SAR_FREQUNCY/scr;
-+  chInfo.TxVc_CellRate = scr;
-+  chInfo.TxVc_Pcr = pcr;
-+
-+  /*default */
-+  chInfo.PktType      = PACKET_TYPE_AAL5;
-+  chInfo.TxServiceMax = TX_SERVICE_MAX;
-+  chInfo.RxServiceMax = RX_SERVICE_MAX;
-+  chInfo.TxNumQueues  = TX_QUEUE_NUM;
-+  chInfo.TxNumBuffers = TX_BUFFER_NUM;
-+  chInfo.RxNumBuffers = RX_BUFFER_NUM;
-+  chInfo.RxBufSize    = RX_BUFFER_SIZE;
-+  chInfo.RxVc_OamToHost = 0;
-+  chInfo.RxVp_OamToHost = 0;
-+  chInfo.TxVc_AtmHeader = tn7sar_atm_header((int)vpi, vci);
-+  chInfo.RxVc_AtmHeader = tn7sar_atm_header((int)vpi, vci);
-+  chInfo.TxVp_AtmHeader = tn7sar_atm_header((int)vpi, 0);
-+  chInfo.RxVp_AtmHeader = tn7sar_atm_header((int)vpi, 0);
-+  chInfo.CpcsUU = 0;
-+
-+  dprintf(4, "TxVc_AtmHeader=0x%x\n", chInfo.TxVc_AtmHeader);
-+
-+  if(pHalFunc->ChannelSetup(pHalDev, &chInfo, NULL))
-+  {
-+    printk("failed to setup channel =%d.\n", chan);
-+    return -1;
-+  }
-+ 
-+
-+  return 0;
-+}
-+
-+int tn7sar_send_packet(Tn7AtmPrivate *priv, int chan, void *new_skb, void *data,unsigned int len, int priority)
-+{
-+  FRAGLIST fragList;
-+  unsigned int mode;
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+
-+  dprintf(4, "tn7sar_send_packet\n");
-+  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+  fragList.len = len;
-+  fragList.data = (void *)data;
-+
-+  xdump((char *)fragList.data , fragList.len, 6);
-+
-+  /*mode bit 
-+  31-19 unused
-+  18    oam cell, 1 = true, 0=false
-+  17-16 oam type, 0=F4 seg, 1=F4 End, 2=F5 seg, 3=F5 end
-+  15-08 transimit queue, current, 0=priority queue, 1=normal queue
-+  07-00 channel number
-+  */
-+  mode = 0;
-+  mode |= (0xff & chan);
-+  mode |= ((0xff & priority) << 8);
-+  
-+  dprintf(4, "mode = %d\n", mode);
-+
-+  tn7sar_data_writeback(fragList.data, len);
-+  if(pHalFunc->Send(pHalDev, &fragList, 1, len, new_skb, mode) != 0)
-+  {
-+    dprintf(1, "SAR hal failed to send packet.\n");
-+    return 1;
-+  }
-+  //tn7sar_get_stats(priv);
-+  sarStat.txPktCnt++;
-+  sarStat.txBytes +=len;
-+  return 0;
-+}
-+
-+
-+
-+int tn7sar_handle_interrupt(struct atm_dev *dev, Tn7AtmPrivate *priv)
-+{
-+  int more;
-+  int rc;
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+  int (*halIsr)(HAL_DEVICE *halDev, int *work);
-+
-+  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
-+  halIsr = priv->halIsr;
-+
-+  rc = halIsr(pHalDev, &more);
-+  
-+  pHalFunc->PacketProcessEnd(pHalDev);
-+
-+  return rc;
-+}
-+
-+
-+int tn7sar_deactivate_vc(Tn7AtmPrivate *priv, int chan)
-+{
-+  unsigned int mode;
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+
-+  dprintf(4, "tn7sar_deactivate_vc\n");
-+  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+  mode = 0xf; //tear down everything, wait for return;
-+
-+  pHalFunc->ChannelTeardown(pHalDev, chan, mode);
-+  return 0;
-+}
-+
-+void tn7sar_exit(struct atm_dev *dev, Tn7AtmPrivate *priv)
-+{
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+
-+  dprintf(4, "tn7sar_exit()\n");
-+
-+  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
-+  
-+  tn7sar_deactivate_vc(priv, 15); // de-activate oam channel
-+
-+  pHalFunc->Close(pHalDev, 2);
-+  pHalFunc->Shutdown(pHalDev);
-+
-+  kfree(priv->pSarOsFunc);
-+  
-+}
-+
-+void tn7sar_get_sar_version(Tn7AtmPrivate *priv, char **pVer)
-+{
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+
-+  dprintf(4, "tn7sar_get_sar_version()\n");
-+
-+  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
-+  pHalFunc->Control(pHalDev, "Version", "Get", pVer);
-+}
-+
-+
-+int tn7sar_get_near_end_loopback_count(unsigned int *pF4count, unsigned int *pF5count)
-+{
-+  unsigned int f4c, f5c;
-+
-+  f4c = *(volatile unsigned int *)SAR_PDSP_OAM_F4LB_COUNT_REG_ADDR;
-+  f5c = *(volatile unsigned int *)SAR_PDSP_OAM_F5LB_COUNT_REG_ADDR;
-+  *pF4count = f4c;
-+  *pF5count = f5c;
-+
-+  return 0;
-+}
-+
-+
-+int tn7sar_unmatched_oam_generation(void *privContext, int vpi, int vci, int type)
-+{
-+
-+  unsigned int regv = 0;
-+  int chan=15;
-+  static unsigned int tag;
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+  Tn7AtmPrivate *priv;
-+  unsigned int llid[4]={0xffffffff,0xffffffff,0xffffffff,0xffffffff};
-+
-+  dprintf(4, "tn7sar_unknow_oam_generation()\n");
-+ 
-+  priv = (Tn7AtmPrivate *)privContext;
-+  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+  if(vci==0)
-+  {
-+    oamPingStatus = OAM_PING_FAILED;
-+    return 0;
-+  }
-+  /* calculate atm header */
-+  oamAtmHdr = tn7sar_atm_header(vpi,vci);
-+
-+  /* config the atm header */
-+  pHalFunc->Control(pHalDev,"TxVc_AtmHeader.15", "Set", &oamAtmHdr);
-+
-+  /*record oam type */
-+  oam_type = type;
-+
-+  regv = (0xff & chan);
-+  
-+  switch(type)
-+  {
-+    case 0:
-+      regv |= (1<<12); //f5 end 
-+      dprintf(2, "f5 loop back\n");
-+      break;
-+    case 1:
-+      regv |= (1<<13); // f4 end
-+      break;
-+    case 2:
-+      regv |= (1<<14); //f5 seg
-+      break;
-+    case 3:
-+      regv |= (1<<15); //f4 seg
-+      break;
-+    default:
-+      break;
-+  }
-+  oamPingStatus = OAM_PING_PENDING;
-+  pHalFunc->OamLoopbackConfig(pHalDev, regv, llid, tag);
-+  tag++;
-+  return 0;
-+
-+}
-+
-+int tn7sar_oam_generation(void *privContext, int chan, int type, int vpi, int vci, int timeout)
-+{
-+  unsigned int regv = 0;
-+  static unsigned int tag;
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+  Tn7AtmPrivate *priv;
-+  unsigned int llid[4]={0xffffffff,0xffffffff,0xffffffff,0xffffffff};
-+
-+  dprintf(2, "tn7sar_oam_generation()\n");
-+
-+  priv = (Tn7AtmPrivate *)privContext;
-+  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+  if(timeout >= 5000)
-+  {
-+    if(timeout == 6000)
-+    {
-+      tn7sar_clear_pvc_table();
-+      return 0;
-+    }
-+    timeout = oamLbTimeout;
-+  }
-+
-+
-+  pHalFunc->Control(pHalDev,"OamLbTimeout", "Set", &timeout);
-+
-+  if(chan == ATM_NO_DMA_CHAN)
-+  {
-+    tn7sar_unmatched_oam_generation(priv, vpi, vci, type);
-+    return 0;
-+  }
-+
-+  /* calculate atm header */
-+  oamAtmHdr = tn7sar_atm_header(vpi,vci);
-+  
-+  oam_type = type;
-+
-+  regv = (0xff & chan);
-+  switch(type)
-+  {
-+    case 0:
-+      regv |= (1<<12); //f5 end 
-+      dprintf(2, "f5 loop back\n");
-+      break;
-+    case 1:
-+      regv |= (1<<13); // f4 end
-+      break;
-+    case 2:
-+      regv |= (1<<14); //f5 seg
-+      break;
-+    case 3:
-+      regv |= (1<<15); //f4 seg
-+      break;
-+    default:
-+      break;
-+  }
-+  oamPingStatus = OAM_PING_PENDING;
-+  pHalFunc->OamLoopbackConfig(pHalDev, regv, llid, tag);
-+  tag++;
-+
-+  return 0;
-+}
-+
-+int tn7sar_proc_oam_ping(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+  int len = 0;
-+
-+  len += sprintf(buf+len, "%d\n", oamPingStatus);
-+
-+  return len;
-+}
-+
-+int tn7sar_proc_pvc_table(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+  int len = 0;
-+  int i;
-+ 
-+  for(i=0;i<16;i++)
-+  {
-+    if(pvc_result[i].bInUse)
-+    {
-+      len += sprintf(buf+len, "%d,%d\n", pvc_result[i].vpi,pvc_result[i].vci);
-+    }
-+    else
-+    {
-+      len += sprintf(buf+len, "0,0\n");
-+    }
-+  }
-+  return len;
-+}
-+
-+ 
-+
-+int tn7sar_proc_sar_stat(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+  int len = 0;
-+  int limit = count - 80;
-+  struct atm_dev *dev;
-+  Tn7AtmPrivate *priv;
-+  int i, j, k;
-+  int stat_len;
-+  char statString[32];
-+  unsigned int *pStateBase, *pSarStat;
-+  HAL_FUNCTIONS *pHalFunc;
-+  HAL_DEVICE    *pHalDev;
-+  int dBytes;
-+
-+  dev = (struct atm_dev *)data;
-+  priv = (Tn7AtmPrivate *)dev->dev_data;
-+
-+  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+  len += sprintf(buf+len, "SAR HAL Statistics\n");
-+  for(i=0;i<MAX_DMA_CHAN;i++)
-+  {
-+    if(priv->lut[i].inuse)
-+    {
-+      if(len<=limit)
-+      len += sprintf(buf+len, "\nChannel %d:\n",priv->lut[i].chanid);
-+      k=0;
-+      for(j=0;j<4;j++)
-+      {
-+        stat_len =sprintf(statString, "Stats;%d;%d", j,priv->lut[i].chanid);
-+        statString[stat_len]=0;
-+        pHalFunc->Control(pHalDev, statString, "Get", &pSarStat);
-+        pStateBase = pSarStat;
-+        while(pSarStat)
-+        {          
-+          if((char *)*pSarStat == NULL)
-+            break;
-+          if(len<=limit)
-+          {
-+            dBytes = sprintf(buf+len, "%s: ",(char *) *pSarStat);
-+            len += dBytes;
-+            k += dBytes;
-+          }
-+          pSarStat++;
-+          if(len<=limit)
-+          {
-+            dBytes = sprintf(buf+len, "%s;  ",(char *) *pSarStat);
-+            len += dBytes;
-+            k += dBytes;
-+          }
-+          pSarStat++;
-+          
-+          if(k > 60)
-+          {
-+            k=0;
-+            if(len<=limit)
-+            len += sprintf(buf+len, "\n");
-+          }
-+        }
-+          
-+        kfree(pStateBase);
-+      }
-+    }
-+  }
-+ 
-+  return len;
-+}
-+
-+void tn7sar_get_sar_firmware_version(unsigned int *pdsp_version_ms, unsigned int *pdsp_version_ls)
-+{
-+
-+  *pdsp_version_ms = (SarPdspFirmware[9]>>20) & 0xF;
-+  *pdsp_version_ls = (SarPdspFirmware[9]>>12) & 0xFF;
-+  return;
-+}
-diff -urN linux.old/drivers/atm/sangam_atm/tnetd7300_sar_firm.h linux.dev/drivers/atm/sangam_atm/tnetd7300_sar_firm.h
---- linux.old/drivers/atm/sangam_atm/tnetd7300_sar_firm.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/tnetd7300_sar_firm.h	2005-08-23 04:46:50.111841568 +0200
-@@ -0,0 +1,988 @@
-+//SarPdspFirmware Revision:  49
-+
-+static int SarPdspFirmware[] = {
-+                             0xb0a8d1f1,
-+                             0x000003d8,
-+                             0x00000000,
-+                             0x00000004,
-+                             0x00000000,
-+                             0x00000000,
-+                             0x00000000,
-+                             0x00000000,
-+                             0x21000900,
-+                             0x24049080,
-+                             0x24000080,
-+                             0x240000c0,
-+                             0x10e0e0e1,
-+                             0x10e0e0e2,
-+                             0x10e0e0e3,
-+                             0x10e0e0e4,
-+                             0x10e0e0e5,
-+                             0x10e0e0e6,
-+                             0x10e0e0e7,
-+                             0x10e0e0e8,
-+                             0x10e0e0e9,
-+                             0x10e0e0ea,
-+                             0x10e0e0eb,
-+                             0x10e0e0ec,
-+                             0x10e0e0ed,
-+                             0x10e0e0ee,
-+                             0x10e0e0ef,
-+                             0x10e0e0f0,
-+                             0x10e0e0f1,
-+                             0x10e0e0f2,
-+                             0x10e0e0f3,
-+                             0x10e0e0f4,
-+                             0x10e0e0f5,
-+                             0x10e0e0f6,
-+                             0x10e0e0f7,
-+                             0x10e0e0f8,
-+                             0x10e0e0f9,
-+                             0x10e0e0fa,
-+                             0x10e0e0fb,
-+                             0x10e0e0fc,
-+                             0x10e0e0fd,
-+                             0x10e0e0fe,
-+                             0x10e0e0ff,
-+                             0x81042680,
-+                             0x810c2680,
-+                             0x81042680,
-+                             0x2483c080,
-+                             0x81180b80,
-+                             0x2484c080,
-+                             0x811a0b80,
-+                             0x2485c080,
-+                             0x811c0b80,
-+                             0x240100dd,
-+                             0xa07d06fd,
-+                             0x240400dd,
-+                             0xa07d04fd,
-+                             0x24c000dd,
-+                             0x2400169d,
-+                             0xa07d5cfd,
-+                             0x511f9d03,
-+                             0x01019d9d,
-+                             0x7f0000fd,
-+                             0xd11eff05,
-+                             0x97c06890,
-+                             0x1d00e5e5,
-+                             0x2301229e,
-+                             0x81bc2890,
-+                             0x24000000,
-+                             0xc917ff02,
-+                             0x81000100,
-+                             0x01010000,
-+                             0xc918ff02,
-+                             0x81000100,
-+                             0x01010000,
-+                             0xc919ff02,
-+                             0x81000100,
-+                             0xd110e70a,
-+                             0xd11cff09,
-+                             0x1d00e5e5,
-+                             0xd100e704,
-+                             0xd114ff06,
-+                             0x2301179e,
-+                             0x79000004,
-+                             0xd70ffffd,
-+                             0x91382486,
-+                             0x2301059e,
-+                             0xc903ff07,
-+                             0xa06047e0,
-+                             0xb10043e6,
-+                             0xc910e602,
-+                             0x81000106,
-+                             0x24006025,
-+                             0x2300d39e,
-+                             0xd11dff09,
-+                             0x1f00e5e5,
-+                             0xc901e705,
-+                             0xd111ff06,
-+                             0x91382586,
-+                             0x2301059e,
-+                             0x79000003,
-+                             0xd715fffc,
-+                             0x2301179e,
-+                             0xc910e706,
-+                             0x110f2760,
-+                             0x240000c6,
-+                             0x24000086,
-+                             0x13106006,
-+                             0x7b00005a,
-+                             0x11079f80,
-+                             0x51008010,
-+                             0xc912ff0f,
-+                             0xd100ff04,
-+                             0xd101ff05,
-+                             0xa06046e0,
-+                             0x79000004,
-+                             0xa06044e0,
-+                             0x79000002,
-+                             0xa06045e0,
-+                             0xb10043e6,
-+                             0x61150602,
-+                             0x2101c500,
-+                             0xc910e602,
-+                             0xa1001006,
-+                             0x24000025,
-+                             0x2300d39e,
-+                             0xd11fff05,
-+                             0x97c06a90,
-+                             0x1f00e5e5,
-+                             0x2301229e,
-+                             0x81bc2a90,
-+                             0xd11cff09,
-+                             0x1d00e5e5,
-+                             0xc900e705,
-+                             0xd10fff06,
-+                             0x91382486,
-+                             0x2301059e,
-+                             0x79000003,
-+                             0xd714fffc,
-+                             0x2301179e,
-+                             0xc907ff07,
-+                             0xa0604be0,
-+                             0xb10043e6,
-+                             0xc910e602,
-+                             0x81000106,
-+                             0x24006025,
-+                             0x2300d39e,
-+                             0xd111e70a,
-+                             0xd11dff09,
-+                             0x1f00e5e5,
-+                             0xd101e704,
-+                             0xd115ff06,
-+                             0x2301179e,
-+                             0x79000004,
-+                             0xd711fffd,
-+                             0x91382586,
-+                             0x2301059e,
-+                             0xc911e706,
-+                             0x0b042760,
-+                             0x240000c6,
-+                             0x24000086,
-+                             0x13106006,
-+                             0x7b000024,
-+                             0x11709f80,
-+                             0x5100800e,
-+                             0xc913ff0d,
-+                             0xd104ff04,
-+                             0xd105ff05,
-+                             0xa0604ae0,
-+                             0x79000004,
-+                             0xa06048e0,
-+                             0x79000002,
-+                             0xa06049e0,
-+                             0xb10043e6,
-+                             0xc910e602,
-+                             0xa1001106,
-+                             0x24000025,
-+                             0x2300d39e,
-+                             0xc90bff02,
-+                             0x7900000b,
-+                             0xc90aff02,
-+                             0x79000012,
-+                             0xcf08ff89,
-+                             0xb10002e0,
-+                             0xcf18e087,
-+                             0x790000b6,
-+                             0x24000080,
-+                             0x24fb00c0,
-+                             0xa06003e0,
-+                             0x7f000082,
-+                             0xb10024e6,
-+                             0xb10025e0,
-+                             0xa06628e6,
-+                             0xa06029e0,
-+                             0x248000c6,
-+                             0xa06624e6,
-+                             0x671006f0,
-+                             0x81082186,
-+                             0x7f0000ee,
-+                             0xb10027e6,
-+                             0x61100604,
-+                             0xa0662be6,
-+                             0x810c2186,
-+                             0x79000006,
-+                             0xd70cffea,
-+                             0xa0662be6,
-+                             0x1f1be6e6,
-+                             0x81382686,
-+                             0x813c2680,
-+                             0x248000c6,
-+                             0xa06627e6,
-+                             0x7f0000e3,
-+                             0x110f0600,
-+                             0x81100b00,
-+                             0x01502545,
-+                             0x90457888,
-+                             0x5103091c,
-+                             0x6901092a,
-+                             0xc910e603,
-+                             0xd108e90d,
-+                             0x79000027,
-+                             0x01582545,
-+                             0x9045788a,
-+                             0xd108e904,
-+                             0x1f08e9e9,
-+                             0x01552545,
-+                             0x80451829,
-+                             0x50eaeb20,
-+                             0x0101ebeb,
-+                             0x015c2545,
-+                             0x8045388b,
-+                             0x7900001c,
-+                             0x015c2545,
-+                             0x9045788b,
-+                             0x6900eb05,
-+                             0x1d08e9e9,
-+                             0x01552545,
-+                             0x80451829,
-+                             0x79000004,
-+                             0x0501ebeb,
-+                             0x015c2545,
-+                             0x8045388b,
-+                             0x10ecece8,
-+                             0x79000010,
-+                             0x24000000,
-+                             0x5110000e,
-+                             0x690f6903,
-+                             0x24000069,
-+                             0x79000002,
-+                             0x01016969,
-+                             0x01010000,
-+                             0x81100b69,
-+                             0x01542545,
-+                             0x90451809,
-+                             0x6f0209f7,
-+                             0xa1001069,
-+                             0x81100b06,
-+                             0x01572545,
-+                             0x80451869,
-+                             0xa06841e8,
-+                             0xa1414006,
-+                             0x209e0000,
-+                             0x81100b06,
-+                             0xd11fe603,
-+                             0x9164388d,
-+                             0x8108248d,
-+                             0xd100e507,
-+                             0x97406490,
-+                             0x9108248d,
-+                             0x813c2480,
-+                             0x2302b4de,
-+                             0x1d00e7e7,
-+                             0x79000006,
-+                             0x97406590,
-+                             0x9108258d,
-+                             0x813c2580,
-+                             0x1d01e7e7,
-+                             0x2302b9de,
-+                             0x8164388d,
-+                             0x209e0000,
-+                             0x81040105,
-+                             0x91002286,
-+                             0x97086290,
-+                             0x81042280,
-+                             0xd100e504,
-+                             0x2302b4de,
-+                             0x1f00e7e7,
-+                             0x209e0000,
-+                             0x2302b9de,
-+                             0x1f01e7e7,
-+                             0x209e0000,
-+                             0xd109ff00,
-+                             0xa0702cf0,
-+                             0x79000001,
-+                             0xd109ff00,
-+                             0xb1002de6,
-+                             0xd11ee609,
-+                             0xb1000de0,
-+                             0xc91fe044,
-+                             0x24c338c6,
-+                             0x10000006,
-+                             0x81382686,
-+                             0x87406690,
-+                             0x813c2680,
-+                             0x7900003e,
-+                             0x110f0600,
-+                             0x81100b00,
-+                             0x24000045,
-+                             0x24000025,
-+                             0x61100603,
-+                             0x24006045,
-+                             0x24006025,
-+                             0x01704545,
-+                             0x90451888,
-+                             0x0b034600,
-+                             0x11070000,
-+                             0x69040004,
-+                             0xc916ff2c,
-+                             0x01019e9e,
-+                             0x7900002f,
-+                             0xc90cff04,
-+                             0x6f0200fd,
-+                             0xd308e8a1,
-+                             0x7f0000fb,
-+                             0x69020008,
-+                             0xd308e89e,
-+                             0xb1002fe6,
-+                             0x91b82880,
-+                             0xc91ce002,
-+                             0x1f1ce6e6,
-+                             0x10080806,
-+                             0x79000015,
-+                             0xb1002fe6,
-+                             0x69030003,
-+                             0x13c06666,
-+                             0x79000011,
-+                             0x91807809,
-+                             0xc910ea09,
-+                             0x81082689,
-+                             0x01018a8a,
-+                             0xc91ee60a,
-+                             0x1d10eaea,
-+                             0x240557c0,
-+                             0x60c08a07,
-+                             0x1f1de6e6,
-+                             0x79000005,
-+                             0x2400018a,
-+                             0x1f10eaea,
-+                             0x1f1fe6e6,
-+                             0xd71ee6f8,
-+                             0x51000002,
-+                             0x11c76666,
-+                             0x81382686,
-+                             0x87406690,
-+                             0x91082689,
-+                             0x813c2680,
-+                             0xb1002ee6,
-+                             0xd103e609,
-+                             0x81807809,
-+                             0xc908e807,
-+                             0x21039400,
-+                             0x81002386,
-+                             0x87086390,
-+                             0x81042380,
-+                             0xc908e802,
-+                             0x21039400,
-+                             0x209e0000,
-+                             0xb10008ef,
-+                             0x110f0f00,
-+                             0x81100b00,
-+                             0x24000025,
-+                             0x61100f02,
-+                             0x24005025,
-+                             0x01952545,
-+                             0x9045382e,
-+                             0xc91def03,
-+                             0x24000900,
-+                             0x2301c09e,
-+                             0xc91cef03,
-+                             0x24001900,
-+                             0x2301c09e,
-+                             0xc91bef03,
-+                             0x24000a00,
-+                             0x2301c09e,
-+                             0xc91aef03,
-+                             0x24001a00,
-+                             0x2301c09e,
-+                             0x8045382e,
-+                             0x01a82545,
-+                             0x9045388e,
-+                             0xc915ef03,
-+                             0x24000000,
-+                             0x2301c09e,
-+                             0xc914ef03,
-+                             0x24001000,
-+                             0x2301c09e,
-+                             0x8045388e,
-+                             0x61100f02,
-+                             0x24006025,
-+                             0x016d2545,
-+                             0x9045382e,
-+                             0xc919ef03,
-+                             0x24000900,
-+                             0x2301c09e,
-+                             0xc918ef03,
-+                             0x24001900,
-+                             0x2301c09e,
-+                             0xc917ef03,
-+                             0x24000a00,
-+                             0x2301c09e,
-+                             0xc916ef03,
-+                             0x24001a00,
-+                             0x2301c09e,
-+                             0x8045382e,
-+                             0x017c2545,
-+                             0x9045388e,
-+                             0xc913ef03,
-+                             0x24000000,
-+                             0x2301c09e,
-+                             0xc912ef03,
-+                             0x24001000,
-+                             0x2301c09e,
-+                             0x8045388e,
-+                             0xd11eef19,
-+                             0x11f02f00,
-+                             0x51000017,
-+                             0x24001520,
-+                             0x81140b20,
-+                             0x81b01a0f,
-+                             0x1f02e7e7,
-+                             0x24c000c0,
-+                             0x24001580,
-+                             0xa0605ce0,
-+                             0xc90fef04,
-+                             0x1d04e7e7,
-+                             0x1d05e7e7,
-+                             0x7900000c,
-+                             0xc90eef04,
-+                             0x1d04e7e7,
-+                             0x1f05e7e7,
-+                             0x79000008,
-+                             0xc90def04,
-+                             0x1f04e7e7,
-+                             0x1d05e7e7,
-+                             0x79000004,
-+                             0xc90cef03,
-+                             0x1f04e7e7,
-+                             0x1f05e7e7,
-+                             0x2100b900,
-+                             0xd11eef03,
-+                             0x1e00eeee,
-+                             0x209e0000,
-+                             0x1c00eeee,
-+                             0x209e0000,
-+                             0x110f0606,
-+                             0x81140b06,
-+                             0x13100606,
-+                             0x91b01a83,
-+                             0x24000025,
-+                             0x61100304,
-+                             0x24005025,
-+                             0xc905e702,
-+                             0x24006025,
-+                             0x110f0300,
-+                             0x81100b00,
-+                             0x81120b00,
-+                             0x51150611,
-+                             0x61100302,
-+                             0x24005025,
-+                             0x1d01e5e5,
-+                             0x51160639,
-+                             0x511a0650,
-+                             0x511c0657,
-+                             0x5118065e,
-+                             0x511e0685,
-+                             0x61100302,
-+                             0x24006025,
-+                             0x1f01e5e5,
-+                             0x51170634,
-+                             0x511b064b,
-+                             0x511d0652,
-+                             0x51190658,
-+                             0x511f067f,
-+                             0xc903e708,
-+                             0x1d03e7e7,
-+                             0x24000060,
-+                             0xa1000a60,
-+                             0x244000c0,
-+                             0x24001580,
-+                             0xa0605ce0,
-+                             0x21007d00,
-+                             0xcf02e7fc,
-+                             0x1d02e7e7,
-+                             0x1f03e7e7,
-+                             0xc904e703,
-+                             0x1f08e3e3,
-+                             0x79000002,
-+                             0x1d08e3e3,
-+                             0xc905e705,
-+                             0x01682545,
-+                             0x9045588d,
-+                             0x2302879e,
-+                             0x79000004,
-+                             0x01902545,
-+                             0x9045588d,
-+                             0x2302819e,
-+                             0x24001872,
-+                             0x24000152,
-+                             0xb10009e0,
-+                             0x108080d3,
-+                             0x10c0c092,
-+                             0x2400102c,
-+                             0x2302c8de,
-+                             0x91021c97,
-+                             0x91001cd8,
-+                             0x91061c98,
-+                             0x91041cd9,
-+                             0x910a1c99,
-+                             0x91081cda,
-+                             0x910e1c9a,
-+                             0x910c1cdb,
-+                             0x91261d9b,
-+                             0x91287d9c,
-+                             0x23028dde,
-+                             0x1f02e7e7,
-+                             0x1d03e7e7,
-+                             0x7d000070,
-+                             0x01902545,
-+                             0x9045798d,
-+                             0x79000003,
-+                             0x01682545,
-+                             0x9045788d,
-+                             0x0b09eee0,
-+                             0x24001472,
-+                             0xd108e303,
-+                             0xc900e00b,
-+                             0x79000002,
-+                             0xc910e009,
-+                             0xd101e503,
-+                             0x2302819e,
-+                             0x79000002,
-+                             0x2302879e,
-+                             0x91013d12,
-+                             0x9504bd93,
-+                             0x23028dde,
-+                             0x7d00005d,
-+                             0xd108ee03,
-+                             0x1d10e7e7,
-+                             0x7900009a,
-+                             0x1d11e7e7,
-+                             0x79000098,
-+                             0x01902545,
-+                             0x9045798d,
-+                             0x79000003,
-+                             0x01682545,
-+                             0x9045788d,
-+                             0x0b0aeee0,
-+                             0x24001072,
-+                             0x7f0000e8,
-+                             0x01a02545,
-+                             0x9045b98d,
-+                             0x79000003,
-+                             0x01742545,
-+                             0x9045b88d,
-+                             0x0b01efe0,
-+                             0x24001172,
-+                             0x7f0000e0,
-+                             0x2302d1de,
-+                             0x79000002,
-+                             0x2302d6de,
-+                             0x000c2545,
-+                             0x9045198f,
-+                             0xd100ef07,
-+                             0x1d02efef,
-+                             0xc901ef0c,
-+                             0xc905ef0b,
-+                             0x1d01efef,
-+                             0x1d05efef,
-+                             0x79000008,
-+                             0xd102ef04,
-+                             0x1f02efef,
-+                             0x8045198f,
-+                             0x79000078,
-+                             0xd101ef04,
-+                             0x1f01efef,
-+                             0x1f05efef,
-+                             0x8045198f,
-+                             0x69180673,
-+                             0x01ac2545,
-+                             0x2302dbde,
-+                             0xd100ef03,
-+                             0x23036c9e,
-+                             0x7900006e,
-+                             0xc800e40b,
-+                             0x110f0020,
-+                             0x81100b20,
-+                             0x100c0c45,
-+                             0x61100002,
-+                             0x01604545,
-+                             0x9045188f,
-+                             0xd101ef04,
-+                             0x1f01efef,
-+                             0x1f07efef,
-+                             0x8045188f,
-+                             0x01010000,
-+                             0x6f1300f4,
-+                             0x79000060,
-+                             0x2302d1de,
-+                             0x79000002,
-+                             0x2302d6de,
-+                             0x000c2545,
-+                             0x9045198f,
-+                             0xc903ef05,
-+                             0x1d03efef,
-+                             0x1f04efef,
-+                             0x8045198f,
-+                             0x79000056,
-+                             0xc904ef55,
-+                             0x1d04efef,
-+                             0xc901ef04,
-+                             0xc906ef03,
-+                             0x1d01efef,
-+                             0x1d06efef,
-+                             0x8045198f,
-+                             0x691e064e,
-+                             0x01ac2545,
-+                             0x2302dbde,
-+                             0xc800e40c,
-+                             0x110f0020,
-+                             0x81100b20,
-+                             0x100c0c45,
-+                             0x61100002,
-+                             0x01604545,
-+                             0x9045188f,
-+                             0xc901ef05,
-+                             0xc908ef04,
-+                             0x1d01efef,
-+                             0x1d07efef,
-+                             0x8045188f,
-+                             0x01010000,
-+                             0x6f1300f3,
-+                             0x7900003d,
-+                             0x10ededf0,
-+                             0xc908e303,
-+                             0x13401010,
-+                             0x209e0000,
-+                             0x13301010,
-+                             0x209e0000,
-+                             0x10ededf0,
-+                             0xc908e303,
-+                             0x130a1010,
-+                             0x209e0000,
-+                             0x13081010,
-+                             0x209e0000,
-+                             0x24000266,
-+                             0x2400c800,
-+                             0x24000020,
-+                             0xd108ee17,
-+                             0x01012020,
-+                             0xc91cff09,
-+                             0x6e0020fe,
-+                             0xc910e702,
-+                             0x20de0000,
-+                             0x1f10e7e7,
-+                             0x110f0600,
-+                             0x11f02727,
-+                             0x12002727,
-+                             0x20de0000,
-+                             0x1d10e7e7,
-+                             0x2302b4de,
-+                             0x511d0605,
-+                             0x511c0602,
-+                             0x7900001e,
-+                             0x01a62545,
-+                             0x79000002,
-+                             0x01722545,
-+                             0x90451880,
-+                             0x01018080,
-+                             0x80451880,
-+                             0x79000017,
-+                             0x01012020,
-+                             0xc91dff09,
-+                             0x6e0020fe,
-+                             0xc911e702,
-+                             0x20de0000,
-+                             0x1f11e7e7,
-+                             0x09040600,
-+                             0x110f2727,
-+                             0x12002727,
-+                             0x20de0000,
-+                             0x1d11e7e7,
-+                             0x2302b9de,
-+                             0x7f0000ea,
-+                             0x81b82786,
-+                             0x240000d1,
-+                             0x87c06790,
-+                             0x81bc2780,
-+                             0x20de0000,
-+                             0x81b82986,
-+                             0x87c06990,
-+                             0x81bc2980,
-+                             0x20de0000,
-+                             0x91b43a88,
-+                             0x2301029e,
-+                             0x51150608,
-+                             0xc908e305,
-+                             0x51120303,
-+                             0x01010303,
-+                             0x79000002,
-+                             0x24000003,
-+                             0x01012323,
-+                             0x81b01a83,
-+                             0x21007d00,
-+                             0x902cfc88,
-+                             0x10c8c893,
-+                             0x108888d4,
-+                             0x10c9c994,
-+                             0x108989d5,
-+                             0x10caca95,
-+                             0x108a8ad6,
-+                             0x10cbcb96,
-+                             0x108b8bd7,
-+                             0xd108e303,
-+                             0x2400a80c,
-+                             0x20de0000,
-+                             0x2400aa0c,
-+                             0x20de0000,
-+                             0xd108e303,
-+                             0x24007c0c,
-+                             0x20de0000,
-+                             0x24007e0c,
-+                             0x20de0000,
-+                             0x24000000,
-+                             0x90453904,
-+                             0xd108e303,
-+                             0x24007c0c,
-+                             0x20de0000,
-+                             0x24007e0c,
-+                             0x20de0000,
-+                             0xb1002fe6,
-+                             0x91b82880,
-+                             0xc91ce002,
-+                             0x209e0000,
-+                             0xb1002ee6,
-+                             0x69187279,
-+                             0xd110f230,
-+                             0xc903e769,
-+                             0xc90be604,
-+                             0xc904e767,
-+                             0xd105e766,
-+                             0x7900000c,
-+                             0xc90ae604,
-+                             0xd104e763,
-+                             0xd105e762,
-+                             0x79000008,
-+                             0xc907e604,
-+                             0xc904e75f,
-+                             0xc905e75e,
-+                             0x79000004,
-+                             0xc906e65c,
-+                             0xd104e75b,
-+                             0xc905e75a,
-+                             0x91003c80,
-+                             0x6897c058,
-+                             0x68d88057,
-+                             0x91043c80,
-+                             0x6898c055,
-+                             0x68d98054,
-+                             0x91083c80,
-+                             0x6899c052,
-+                             0x68da8051,
-+                             0x910c3c80,
-+                             0x689ac04f,
-+                             0x68db804e,
-+                             0xb10009e0,
-+                             0x6892c04c,
-+                             0x68d3804b,
-+                             0x24000160,
-+                             0xa1000a60,
-+                             0x244000c0,
-+                             0x24001580,
-+                             0xa0605ce0,
-+                             0x1d03e7e7,
-+                             0x109393c8,
-+                             0x10d4d488,
-+                             0x109494c9,
-+                             0x10d5d589,
-+                             0x109595ca,
-+                             0x10d6d68a,
-+                             0x109696cb,
-+                             0x10d7d78b,
-+                             0x8110fc88,
-+                             0x209e0000,
-+                             0x91003c80,
-+                             0x6893c00c,
-+                             0x68d4800b,
-+                             0x91043c80,
-+                             0x6894c009,
-+                             0x68d58008,
-+                             0x91083c80,
-+                             0x6895c006,
-+                             0x68d68005,
-+                             0x910c3c80,
-+                             0x6896c003,
-+                             0x68d78002,
-+                             0x79000010,
-+                             0x24ffff80,
-+                             0x24ffffc0,
-+                             0x68809306,
-+                             0x68e0f405,
-+                             0x68e0f504,
-+                             0x68e0f603,
-+                             0x6880d702,
-+                             0x79000008,
-+                             0x24000080,
-+                             0x240000c0,
-+                             0x68809323,
-+                             0x68e0f422,
-+                             0x68e0f521,
-+                             0x68e0f620,
-+                             0x6880d71f,
-+                             0x1d10f2f2,
-+                             0x2400002c,
-+                             0x2302c8de,
-+                             0x24000f80,
-+                             0x240000c0,
-+                             0x0101c0c0,
-+                             0xd100e504,
-+                             0xc91cff06,
-+                             0x6e80c0fd,
-+                             0x21016d00,
-+                             0xc91dff03,
-+                             0x6e80c0fa,
-+                             0x21016d00,
-+                             0xd104e606,
-+                             0xc909e608,
-+                             0xb1000ce0,
-+                             0x0101e0e0,
-+                             0xa0600ce0,
-+                             0x79000004,
-+                             0xb1000be0,
-+                             0x0101e0e0,
-+                             0xa0600be0,
-+                             0xb1002fe6,
-+                             0xd100e504,
-+                             0x2302b4de,
-+                             0x24000022,
-+                             0x209e0000,
-+                             0x2302b9de,
-+                             0x24000042,
-+                             0x209e0000,
-+                             0xd104e609,
-+                             0x01782545,
-+                             0x9045180e,
-+                             0x110f0e00,
-+                             0x81100b00,
-+                             0x2400a445,
-+                             0x51002502,
-+                             0x01504545,
-+                             0x90451888,
-+                             0xc909e87d,
-+                             0xb1002fe6,
-+                             0x1f1fe6e6,
-+                             0x10080806,
-+                             0x21015f00,
-+                             0x6914721b,
-+                             0x01782545,
-+                             0x2303bade,
-+                             0x900c188f,
-+                             0x1d02efef,
-+                             0xc901ef05,
-+                             0xc905ef04,
-+                             0x1d01efef,
-+                             0x1d05efef,
-+                             0x800c188f,
-+                             0xc909e66e,
-+                             0x2303d0de,
-+                             0xc800e40c,
-+                             0x110f0020,
-+                             0x81100b20,
-+                             0x100c0c45,
-+                             0x61100002,
-+                             0x01604545,
-+                             0x9045188f,
-+                             0xc901ef05,
-+                             0xc907ef04,
-+                             0x1d01efef,
-+                             0x1d07efef,
-+                             0x8045188f,
-+                             0x01010000,
-+                             0x6f1300f3,
-+                             0x7900005e,
-+                             0x6910725d,
-+                             0x01782545,
-+                             0x2303bade,
-+                             0x900c188f,
-+                             0x1f03efef,
-+                             0xd101ef03,
-+                             0x1f01efef,
-+                             0x1f06efef,
-+                             0x800c188f,
-+                             0xc909e654,
-+                             0x2303d0de,
-+                             0xc800e40b,
-+                             0x110f0020,
-+                             0x81100b20,
-+                             0x100c0c45,
-+                             0x61100002,
-+                             0x01604545,
-+                             0x9045188f,
-+                             0xd101ef04,
-+                             0x1f01efef,
-+                             0x1f08efef,
-+                             0x8045188f,
-+                             0x01010000,
-+                             0x6f1300f4,
-+                             0x79000045,
-+                             0x01782545,
-+                             0x9045788e,
-+                             0x1d02efef,
-+                             0x1d12efef,
-+                             0xc905ef04,
-+                             0x1d05efef,
-+                             0x1d01efef,
-+                             0x7900000c,
-+                             0xc915ef04,
-+                             0x1d15efef,
-+                             0x1d11efef,
-+                             0x79000008,
-+                             0xc907ef04,
-+                             0x1d07efef,
-+                             0x1d01efef,
-+                             0x79000004,
-+                             0xc917ef03,
-+                             0x1d17efef,
-+                             0x1d11efef,
-+                             0x017c2545,
-+                             0x8045388f,
-+                             0x110f0e00,
-+                             0x81100b00,
-+                             0x2400a845,
-+                             0x51002502,
-+                             0x01504545,
-+                             0x9045388f,
-+                             0x1d02efef,
-+                             0x1d12efef,
-+                             0xc905ef04,
-+                             0x1d05efef,
-+                             0x1d01efef,
-+                             0x79000004,
-+                             0xc915ef03,
-+                             0x1d15efef,
-+                             0x1d11efef,
-+                             0x8045388f,
-+                             0x7900001f,
-+                             0xc909e60d,
-+                             0x9045180e,
-+                             0x110f0e00,
-+                             0x81100b00,
-+                             0xc90ae603,
-+                             0x2400a80c,
-+                             0x79000003,
-+                             0xc90be617,
-+                             0x2400aa0c,
-+                             0x51002503,
-+                             0x01500c0c,
-+                             0x24005025,
-+                             0x20de0000,
-+                             0xc904e611,
-+                             0xc906e603,
-+                             0x24007c0c,
-+                             0x79000003,
-+                             0xc907e60d,
-+                             0x24007e0c,
-+                             0x51002502,
-+                             0x01600c0c,
-+                             0x20de0000,
-+                             0x01ac2545,
-+                             0x24000000,
-+                             0x90453804,
-+                             0xd10be603,
-+                             0x24007c0c,
-+                             0x20de0000,
-+                             0x24007e0c,
-+                             0x20de0000,
-+                             0x209e0000};
-diff -urN linux.old/drivers/atm/sangam_atm/turbodsl.c linux.dev/drivers/atm/sangam_atm/turbodsl.c
---- linux.old/drivers/atm/sangam_atm/turbodsl.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/turbodsl.c	2005-08-23 04:46:50.111841568 +0200
-@@ -0,0 +1,223 @@
-+
-+
-+/*
-+ *
-+ *  Turbo DSL Implementaion
-+ *
-+ *  Zhicheng Tang   ztang@ti.com
-+ *
-+ *  2002 (c) Texas Instruments Inc.
-+ *
-+*/
-+
-+/* defines and variables */
-+#define RFC2684_BRIDGED_HDR_SIZE 10
-+unsigned char LLC_BRIDGED_HEADER_2684[RFC2684_BRIDGED_HDR_SIZE] =
-+  {0xAA, 0xAA, 0x03, 0x00, 0x80, 0xC2, 0x00, 0x07, 0x00, 0x00};
-+
-+#define RFC2684_ROUTED_HDR_SIZE 6
-+unsigned char LLC_ROUTED_HEADER_2684[6] ={0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00};
-+
-+unsigned long PPP_LLC_HEADER  = 0xCF03FEFE;
-+
-+/* struct definition */
-+enum
-+{  
-+  AAL5_ENCAP_PPP_LLC,
-+  AAL5_ENCAP_PPP_VCMUX,
-+  AAL5_ENCAP_RFC2684_LLC_BRIDGED,
-+  AAL5_ENCAP_RFC2684_LLC_ROUTED
-+};
-+
-+/* Etherent header */
-+typedef struct _turbodsl_ether_header 
-+{
-+        unsigned char dst_mac_addr[6];
-+        unsigned char src_mac_addr[6];
-+        unsigned short ether_type;
-+} turbodsl_ether_header_t;
-+
-+
-+/* Ip header define */
-+typedef struct _turbodsl_ip_header
-+{
-+
-+        unsigned short vit;
-+        unsigned short total_length;
-+        unsigned short ip_id;
-+        unsigned char  flag;            /* bit 0 = 0, bit1 = don't fragment, bit2=more frag */
-+  unsigned char  fragment_offset; /* offset include remaining 5 bits above, which make it 13 bits */
-+        unsigned char  time_to_live;
-+        unsigned char  protocol;
-+        unsigned short checksum;
-+        unsigned int  src_ip;
-+        unsigned int  dst_ip;
-+} turbodsl_ip_header_t;
-+
-+/* Arp packet define */
-+typedef struct _turbodsl_arp_header
-+{
-+        unsigned short hardware_type;
-+        unsigned short protocol_type;
-+        unsigned char  h_len;
-+        unsigned char  p_len;
-+        unsigned short operation  ;
-+        unsigned char  snd_hw_address[6];
-+        unsigned char  snd_pt_address[4];
-+        unsigned char  dst_hw_address[6];
-+        unsigned char  dst_pt_address[4];
-+} turbodsl_arp_header_t;
-+
-+#define FIN_FLAG 1
-+#define SYN_FLAG 1<<1
-+#define RST_FLAG 1<<2
-+#define PSH_FLAG 1<<3
-+#define ACK_FLAG 1<<4
-+#define URG_FLAG 1<<5
-+
-+typedef struct _turbodsl_tcp_header
-+{
-+        unsigned short src_port;
-+        unsigned short dst_port;
-+        unsigned int seq_num;
-+        unsigned int ack_num;
-+  unsigned char  offset; /* only bits 4-7 are for offset */
-+  unsigned char  flags;  /* bits: 0-FIN, 1-SYN, 2-RST, 3-PSH, 4-ACK, 5-URG */
-+  unsigned short windows; 
-+        unsigned short checksum;
-+        unsigned short urgent_ptr;
-+} turbodsl_tcp_header_t;
-+ 
-+
-+
-+/***************************************************************************
-+ * Function: turbodsl_memory_compare
-+ * Descripation: Memory compare
-+ ****************************************************************************/
-+int turbodsl_memory_compare(unsigned char *pIn, unsigned char *pOut, unsigned int len)
-+  {
-+  int i;
-+  
-+  for(i=0;i<(int)len; i++)
-+    {
-+    if(pIn[i] != pOut[i])
-+      return 0;
-+    }
-+  return 1;
-+  }
-+
-+/***************************************************************************
-+ * Function: turbodsl_check_aal5_encap_type
-+ * Descripation: Determine AAL5 Encapsulation type
-+ * Input:
-+ *        unsigned char *pData, AAL5 Packet buffer pointer
-+ ****************************************************************************/
-+int turbodsl_check_aal5_encap_type(unsigned char *pData)
-+  {
-+  
-+  if(turbodsl_memory_compare(pData, LLC_BRIDGED_HEADER_2684, 6))
-+    return AAL5_ENCAP_RFC2684_LLC_BRIDGED;
-+  if(turbodsl_memory_compare(pData, LLC_ROUTED_HEADER_2684, 6))
-+    return AAL5_ENCAP_RFC2684_LLC_ROUTED;
-+  if(turbodsl_memory_compare(pData, (unsigned char *)&PPP_LLC_HEADER, sizeof(PPP_LLC_HEADER)))
-+    return AAL5_ENCAP_PPP_LLC;
-+ 
-+  return AAL5_ENCAP_PPP_VCMUX;
-+  }
-+  
-+/***************************************************************************
-+ * Function: turbodsl_check_priority_type
-+ * Descripation: Determine AAL5 Encapsulation type
-+ * Input:
-+ *        unsigned char *pData, AAL5 Packet buffer pointer.
-+ *        short vpi, VPI.
-+ *        int vci,  VCI
-+ ****************************************************************************/
-+int turbodsl_check_priority_type(unsigned char *pData)
-+  {
-+  int encap;
-+  unsigned char *pP;
-+  unsigned short etherType;
-+  turbodsl_ip_header_t *pIp;
-+  turbodsl_tcp_header_t *pTcp;
-+  unsigned short ip_length;
-+  
-+  dprintf(2, "turbodsl_check_priority_type ==>\n");
-+
-+  encap = turbodsl_check_aal5_encap_type(pData);
-+  pP = pData;
-+
-+  switch(encap)
-+    {
-+    case AAL5_ENCAP_RFC2684_LLC_BRIDGED:
-+      pP += RFC2684_BRIDGED_HDR_SIZE; //skip off aal5 encap
-+      pP += 12;               //skip of mac address
-+      etherType = *(unsigned short *)pP;
-+      if(etherType != 0x6488 && etherType != 0x0008)
-+        {
-+        //Not an IP packet
-+        return 1;
-+        }
-+
-+      pP +=2;                 //skip ether type
-+      if(etherType == 0x6488)
-+        {
-+        pP += 6;
-+        }
-+      break;
-+    case AAL5_ENCAP_RFC2684_LLC_ROUTED:
-+      pP += RFC2684_ROUTED_HDR_SIZE; //skip of encap
-+      pP += 2; //skip ether type
-+      break;
-+    case AAL5_ENCAP_PPP_LLC:
-+      pP += sizeof(PPP_LLC_HEADER);
-+      if(*pP == 0xff && *(pP+1) == 0x03) //ppp hdlc header
-+        pP += 2;
-+      break;
-+    case AAL5_ENCAP_PPP_VCMUX:
-+      if(*pP == 0xff && *(pP+1) == 0x03) //ppp hdlc header
-+        pP += 2;
-+      break;
-+    default:
-+      return 1;
-+    }
-+
-+  pIp = (turbodsl_ip_header_t *)pP;
-+  if(pIp->vit != 0x0045)
-+    {
-+    //Not a IP packet
-+    return 1;
-+    }
-+
-+  if(pIp->protocol != 0x06) 
-+    {
-+    //not tcp packet
-+    return 1;
-+    }
-+  
-+  pTcp = (turbodsl_tcp_header_t *)(pP + sizeof(turbodsl_ip_header_t));
-+
-+  ip_length = (pIp->total_length>>8) + (pIp->total_length<<8);
-+  
-+  if((pTcp->flags & ACK_FLAG) && ip_length <=40)
-+    return 0;
-+
-+  return 1;
-+  }
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+  
-diff -urN linux.old/include/linux/atmdev.h linux.dev/include/linux/atmdev.h
---- linux.old/include/linux/atmdev.h	2005-08-22 23:18:37.812526104 +0200
-+++ linux.dev/include/linux/atmdev.h	2005-08-23 06:33:33.425389944 +0200
-@@ -30,6 +30,9 @@
- #define ATM_DS3_PCR	(8000*12)
- 			/* DS3: 12 cells in a 125 usec time slot */
- 
-+#define ATM_PDU_OVHD	0	/* number of bytes to charge against buffer
-+				   quota per PDU */
-+
- #define ATM_SD(s)	((s)->sk->protinfo.af_atm)
- 
- 
-@@ -94,7 +97,8 @@
- 					/* set backend handler */
- #define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
- 					/* use backend to make new if */
--
-+#define ATM_STOPTX      _IOW('a',ATMIOC_SPECIAL+4,struct atmif_sioc)
-+					/* Stop Tx on Sangam DSL */
- /*
-  * These are backend handkers that can be set via the ATM_SETBACKEND call
-  * above.  In the future we may support dynamic loading of these - for now,
-@@ -199,7 +203,9 @@
-     "SESSION",	"HASSAP",	"BOUND",	"CLOSE"
- 
- 
--#ifdef __KERNEL__
-+#ifndef __KERNEL__
-+#undef __AAL_STAT_ITEMS
-+#else
- 
- #include <linux/sched.h> /* wait_queue_head_t */
- #include <linux/time.h> /* struct timeval */
-@@ -291,6 +297,7 @@
- 	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
- 	void		*dev_data;	/* per-device data */
- 	void		*proto_data;	/* per-protocol data */
-+	struct timeval	timestamp;	/* AAL timestamps */
- 	struct k_atm_aal_stats *stats;	/* pointer to AAL stats group */
- 	wait_queue_head_t sleep;	/* if socket is busy */
- 	struct sock	*sk;		/* socket backpointer */
-@@ -333,13 +340,14 @@
- 	struct k_atm_dev_stats stats;	/* statistics */
- 	char		signal;		/* signal status (ATM_PHY_SIG_*) */
- 	int		link_rate;	/* link rate (default: OC3) */
--	atomic_t	refcnt;		/* reference count */
--	spinlock_t	lock;		/* protect internal members */
-+        atomic_t        refcnt;         /* reference count */
-+        spinlock_t      lock;           /* protect internal members */
- #ifdef CONFIG_PROC_FS
- 	struct proc_dir_entry *proc_entry; /* proc entry */
- 	char *proc_name;		/* proc entry name */
- #endif
--	struct list_head dev_list;	/* linkage */
-+	struct list_head dev_list;      /* linkage */
-+
- };
- 
- 
diff --git a/openwrt/target/linux/ar7-2.4/patches/005-wdt_driver.patch b/openwrt/target/linux/ar7-2.4/patches/005-wdt_driver.patch
deleted file mode 100644
index 9b01a353da..0000000000
--- a/openwrt/target/linux/ar7-2.4/patches/005-wdt_driver.patch
+++ /dev/null
@@ -1,392 +0,0 @@
-diff -ruN linux-2.4.30-patch006/drivers/char/ar7_wdt.c linux-2.4.30-patch007/drivers/char/ar7_wdt.c
---- linux-2.4.30-patch006/drivers/char/ar7_wdt.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-patch007/drivers/char/ar7_wdt.c	2005-10-27 09:39:40.000000000 +0200
-@@ -0,0 +1,335 @@
-+/* linux/drivers/char/ar7_wdt.c 
-+
-+   TI AR7 watch dog timer support
-+
-+   Copyright (c) 2005 Enrik Berkhan <Enrik.Berkhan@akk.org>
-+
-+   Som code taken from:
-+   National Semiconductor SCx200 Watchdog support
-+   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
-+
-+   This program is free software; you can redistribute it and/or
-+   modify it under the terms of the GNU General Public License as
-+   published by the Free Software Foundation; either version 2 of the
-+   License, or (at your option) any later version.
-+
-+   The author(s) of this software shall not be held liable for damages
-+   of any nature resulting due to the use of this software. This
-+   software is provided AS-IS with no warranties. */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/notifier.h>
-+#include <linux/reboot.h>
-+#include <linux/ioport.h>
-+
-+#include <asm/uaccess.h>
-+
-+#include <asm/ar7/avalanche_misc.h>
-+#include <asm/ar7/sangam.h>
-+
-+#define NAME "ar7_wdt"
-+#define LONGNAME "TI AR7 Watchdog Timer"
-+
-+MODULE_AUTHOR("Enrik Berkhan <Enrik.Berkhan@akk.org>");
-+MODULE_DESCRIPTION(LONGNAME);
-+MODULE_LICENSE("GPL");
-+
-+#ifndef CONFIG_WATCHDOG_NOWAYOUT
-+#define CONFIG_WATCHDOG_NOWAYOUT 0
-+#endif
-+
-+static int margin = 60;
-+MODULE_PARM(margin, "i");
-+MODULE_PARM_DESC(margin, "Watchdog margin in seconds (1 - ~68)");
-+
-+static int nowayout = CONFIG_WATCHDOG_NOWAYOUT;
-+MODULE_PARM(nowayout, "i");
-+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
-+
-+typedef struct {
-+  uint32_t kick_lock;
-+  uint32_t kick;
-+  uint32_t change_lock;
-+  uint32_t change ;
-+  uint32_t disable_lock;
-+  uint32_t disable;
-+  uint32_t prescale_lock;
-+  uint32_t prescale;
-+} ar7_wdt_t;
-+
-+volatile ar7_wdt_t *ar7_wdt = (ar7_wdt_t *)AVALANCHE_WATCHDOG_TIMER_BASE;
-+
-+static struct semaphore open_semaphore;
-+static unsigned expect_close;
-+
-+/* XXX correct? assumed to be sysfreq/2. get this dynamically ... */
-+#define vbus_freq 62500000
-+
-+/* XXX currently fixed, allows max margin ~68.72 secs */
-+#define prescale_value 0xFFFF
-+
-+static void ar7_wdt_kick(uint32_t value)
-+{
-+  ar7_wdt->kick_lock = 0x5555;
-+  if ((ar7_wdt->kick_lock & 3) == 1) {
-+    ar7_wdt->kick_lock = 0xAAAA;
-+    if ((ar7_wdt->kick_lock & 3) == 3) {
-+      ar7_wdt->kick = value;
-+      return;
-+    }
-+  }
-+  printk(KERN_ERR NAME "failed to unlock WDT kick reg\n");
-+}
-+
-+static void ar7_wdt_prescale(uint32_t value)
-+{
-+  ar7_wdt->prescale_lock = 0x5A5A;
-+  if ((ar7_wdt->prescale_lock & 3) == 1) {
-+    ar7_wdt->prescale_lock = 0xA5A5;
-+    if ((ar7_wdt->prescale_lock & 3) == 3) {
-+      ar7_wdt->prescale = value;
-+      return;
-+    }
-+  }
-+  printk(KERN_ERR NAME "failed to unlock WDT prescale reg\n");
-+}
-+
-+static void ar7_wdt_change(uint32_t value)
-+{
-+  ar7_wdt->change_lock = 0x6666;
-+  if ((ar7_wdt->change_lock & 3) == 1) {
-+    ar7_wdt->change_lock = 0xBBBB;
-+    if ((ar7_wdt->change_lock & 3) == 3) {
-+      ar7_wdt->change = value;
-+      return;
-+    }
-+  }
-+  printk(KERN_ERR NAME "failed to unlock WDT change reg\n");
-+}
-+
-+static void ar7_wdt_disable(uint32_t value)
-+{
-+  ar7_wdt->disable_lock = 0x7777;
-+  if ((ar7_wdt->disable_lock & 3) == 1) {
-+    ar7_wdt->disable_lock = 0xCCCC;
-+    if ((ar7_wdt->disable_lock & 3) == 2) {
-+      ar7_wdt->disable_lock = 0xDDDD; 
-+      if ((ar7_wdt->disable_lock & 3) == 3) {
-+	ar7_wdt->disable = value;
-+	return;
-+      }
-+    }
-+  }
-+  printk(KERN_ERR NAME "failed to unlock WDT disable reg\n");
-+  return;
-+}
-+
-+static void ar7_wdt_update_margin(int new_margin)
-+{
-+        uint32_t change;
-+
-+	change = new_margin * (vbus_freq / prescale_value);
-+	if (change < 1) change = 1;
-+	if (change > 0xFFFF) change = 0xFFFF;
-+	ar7_wdt_change(change);
-+	margin = change * prescale_value / vbus_freq;
-+	printk(KERN_INFO NAME
-+	       ": timer margin %d seconds (prescale %d, change %d, freq %d)\n",
-+	       margin, prescale_value, change, vbus_freq);
-+}
-+
-+static void ar7_wdt_enable_wdt(void)
-+{
-+	printk(KERN_DEBUG NAME ": enabling watchdog timer\n");
-+	ar7_wdt_disable(1);
-+	ar7_wdt_kick(1);
-+}
-+
-+static void ar7_wdt_disable_wdt(void)
-+{
-+	printk(KERN_DEBUG NAME ": disabling watchdog timer\n");
-+	ar7_wdt_disable(0);
-+}
-+
-+static int ar7_wdt_open(struct inode *inode, struct file *file)
-+{
-+        /* only allow one at a time */
-+        if (down_trylock(&open_semaphore))
-+                return -EBUSY;
-+	ar7_wdt_enable_wdt();
-+	expect_close = 0;
-+
-+	return 0;
-+}
-+
-+static int ar7_wdt_release(struct inode *inode, struct file *file)
-+{
-+	if (!expect_close) {
-+		printk(KERN_WARNING NAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n");
-+	} else if (!nowayout) {
-+		ar7_wdt_disable_wdt();
-+	}
-+        up(&open_semaphore);
-+
-+	return 0;
-+}
-+
-+static int ar7_wdt_notify_sys(struct notifier_block *this, 
-+				      unsigned long code, void *unused)
-+{
-+        if (code == SYS_HALT || code == SYS_POWER_OFF)
-+		if (!nowayout)
-+			ar7_wdt_disable_wdt();
-+
-+        return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block ar7_wdt_notifier =
-+{
-+        .notifier_call = ar7_wdt_notify_sys
-+};
-+
-+static ssize_t ar7_wdt_write(struct file *file, const char *data, 
-+				     size_t len, loff_t *ppos)
-+{
-+	if (ppos != &file->f_pos)
-+		return -ESPIPE;
-+
-+	/* check for a magic close character */
-+	if (len) 
-+	{
-+		size_t i;
-+
-+		ar7_wdt_kick(1);
-+
-+		expect_close = 0;
-+		for (i = 0; i < len; ++i) {
-+			char c;
-+			if (get_user(c, data+i))
-+				return -EFAULT;
-+			if (c == 'V')
-+				expect_close = 1;
-+		}
-+
-+	}
-+	return len;
-+}
-+
-+static int ar7_wdt_ioctl(struct inode *inode, struct file *file,
-+	unsigned int cmd, unsigned long arg)
-+{
-+	static struct watchdog_info ident = {
-+		.identity = LONGNAME,
-+		.firmware_version = 1, 
-+		.options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING),
-+	};
-+	int new_margin;
-+	
-+	switch (cmd) {
-+	default:
-+		return -ENOTTY;
-+	case WDIOC_GETSUPPORT:
-+		if(copy_to_user((struct watchdog_info *)arg, &ident, 
-+				sizeof(ident)))
-+			return -EFAULT;
-+		return 0;
-+	case WDIOC_GETSTATUS:
-+	case WDIOC_GETBOOTSTATUS:
-+		if (put_user(0, (int *)arg))
-+			return -EFAULT;
-+		return 0;
-+	case WDIOC_KEEPALIVE:
-+		ar7_wdt_kick(1);
-+		return 0;
-+	case WDIOC_SETTIMEOUT:
-+		if (get_user(new_margin, (int *)arg))
-+			return -EFAULT;
-+		if (new_margin < 1)
-+			return -EINVAL;
-+
-+		ar7_wdt_update_margin(new_margin);
-+		ar7_wdt_kick(1);
-+
-+	case WDIOC_GETTIMEOUT:
-+		if (put_user(margin, (int *)arg))
-+			return -EFAULT;
-+		return 0;
-+	}
-+}
-+
-+static struct file_operations ar7_wdt_fops = {
-+	.owner	 = THIS_MODULE,
-+	.write   = ar7_wdt_write,
-+	.ioctl   = ar7_wdt_ioctl,
-+	.open    = ar7_wdt_open,
-+	.release = ar7_wdt_release,
-+};
-+
-+static struct miscdevice ar7_wdt_miscdev = {
-+	.minor = WATCHDOG_MINOR,
-+	.name  = "watchdog",
-+	.fops  = &ar7_wdt_fops,
-+};
-+
-+static __initdata char *last_initiator[] = {
-+  [HARDWARE_RESET] = "hardware reset",
-+  [SOFTWARE_RESET0] = "SW0 software reset",
-+  [SOFTWARE_RESET1] = "SW1 software reset",
-+  [WATCHDOG_RESET] = "watchdog"
-+};
-+
-+static int __init ar7_wdt_init(void)
-+{
-+	int r;
-+
-+	if (!request_mem_region(AVALANCHE_WATCHDOG_TIMER_BASE,
-+				sizeof(ar7_wdt_t), LONGNAME)) {
-+		printk(KERN_WARNING NAME ": watchdog I/O region busy\n");
-+		return -EBUSY;
-+	}
-+
-+	printk(KERN_INFO NAME ": last system reset initiated by %s\n",
-+	       last_initiator[avalanche_get_sys_last_reset_status()]);
-+
-+
-+	ar7_wdt_disable_wdt();
-+	ar7_wdt_prescale(prescale_value);
-+	ar7_wdt_update_margin(margin);
-+
-+	sema_init(&open_semaphore, 1);
-+
-+	r = misc_register(&ar7_wdt_miscdev);
-+	if (r) {
-+                printk(KERN_ERR NAME ": unable to register misc device\n");
-+		release_mem_region(AVALANCHE_WATCHDOG_TIMER_BASE,
-+				   sizeof(ar7_wdt_t));
-+		return r;
-+	}
-+
-+	r = register_reboot_notifier(&ar7_wdt_notifier);
-+        if (r) {
-+                printk(KERN_ERR NAME ": unable to register reboot notifier\n");
-+		misc_deregister(&ar7_wdt_miscdev);
-+		release_mem_region(AVALANCHE_WATCHDOG_TIMER_BASE,
-+				   sizeof(ar7_wdt_t));
-+                return r;
-+        }
-+
-+	return 0;
-+}
-+
-+static void __exit ar7_wdt_cleanup(void)
-+{
-+        unregister_reboot_notifier(&ar7_wdt_notifier);
-+	misc_deregister(&ar7_wdt_miscdev);
-+	release_mem_region(AVALANCHE_WATCHDOG_TIMER_BASE, sizeof(ar7_wdt_t));
-+}
-+
-+module_init(ar7_wdt_init);
-+module_exit(ar7_wdt_cleanup);
-diff -ruN linux-2.4.30-patch006/drivers/char/Config.in linux-2.4.30-patch007/drivers/char/Config.in
---- linux-2.4.30-patch006/drivers/char/Config.in	2005-10-27 11:25:29.000000000 +0200
-+++ linux-2.4.30-patch007/drivers/char/Config.in	2005-10-27 11:17:32.000000000 +0200
-@@ -251,6 +251,9 @@
- bool 'Watchdog Timer Support'	CONFIG_WATCHDOG
- if [ "$CONFIG_WATCHDOG" != "n" ]; then
-    bool '  Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
-+   if [ "$CONFIG_AR7" = "y" ] ; then
-+     tristate '  TI AR7 Watchdog Timer' CONFIG_AR7_WDT
-+   else
-    tristate '  Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
-    tristate '  Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT
-    tristate '  ALi M7101 PMU on ALi 1535D+ Watchdog Timer' CONFIG_ALIM1535_WDT
-@@ -271,7 +274,6 @@
-    tristate '  SBC-60XX Watchdog Timer' CONFIG_60XX_WDT
-    dep_tristate '  SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL
-    tristate '  NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT
--   tristate '  Software Watchdog' CONFIG_SOFT_WATCHDOG
-    tristate '  W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT
-    tristate '  WDT Watchdog timer' CONFIG_WDT
-    tristate '  WDT PCI Watchdog timer' CONFIG_WDTPCI
-@@ -282,6 +284,8 @@
-       fi
-    fi
-    tristate '  ZF MachZ Watchdog' CONFIG_MACHZ_WDT
-+   fi
-+   tristate '  Software Watchdog' CONFIG_SOFT_WATCHDOG
-    if [ "$CONFIG_SGI_IP22" = "y" ]; then
-       dep_tristate '  Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
-    fi
-diff -ruN linux-2.4.30-patch006/drivers/char/Makefile linux-2.4.30-patch007/drivers/char/Makefile
---- linux-2.4.30-patch006/drivers/char/Makefile	2005-10-27 11:19:38.000000000 +0200
-+++ linux-2.4.30-patch007/drivers/char/Makefile	2005-10-27 09:39:40.000000000 +0200
-@@ -342,6 +342,7 @@
- obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
-+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- 
- subdir-$(CONFIG_MWAVE) += mwave
- ifeq ($(CONFIG_MWAVE),y)
-diff -ruN linux-2.4.30-patch006/include/asm-mips/ar7/sangam.h linux-2.4.30-patch007/include/asm-mips/ar7/sangam.h
---- linux-2.4.30-patch006/include/asm-mips/ar7/sangam.h	2005-10-27 11:25:51.000000000 +0200
-+++ linux-2.4.30-patch007/include/asm-mips/ar7/sangam.h	2005-10-27 11:13:37.000000000 +0200
-@@ -152,7 +152,7 @@
- #define AVALANCHE_EMIF_SDRAM_CFG      (AVALANCHE_EMIF_CONTROL_BASE + 0x8)
- #define AVALANCHE_RST_CTRL_PRCR       (KSEG1ADDR(0x08611600))
- #define AVALANCHE_RST_CTRL_SWRCR      (KSEG1ADDR(0x08611604))
--#define AVALANCHE_RST_CTRL_RSR        (KSEG1ADDR(0x08611600))
-+#define AVALANCHE_RST_CTRL_RSR        (KSEG1ADDR(0x08611608))
- 
- #define AVALANCHE_POWER_CTRL_PDCR     (KSEG1ADDR(0x08610A00))
- #define AVALANCHE_WAKEUP_CTRL_WKCR    (KSEG1ADDR(0x08610A0C))
diff --git a/openwrt/target/linux/ar7-2.4/patches/006-sched_use_tsc.patch b/openwrt/target/linux/ar7-2.4/patches/006-sched_use_tsc.patch
deleted file mode 100644
index 5b64310738..0000000000
--- a/openwrt/target/linux/ar7-2.4/patches/006-sched_use_tsc.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-diff -urN linux.old/arch/mips/kernel/time.c linux.dev/arch/mips/kernel/time.c
---- linux.old/arch/mips/kernel/time.c	2005-11-14 11:06:38.661262000 +0100
-+++ linux.dev/arch/mips/kernel/time.c	2005-11-15 20:02:50.059676750 +0100
-@@ -151,6 +151,27 @@
- unsigned int (*mips_hpt_read)(void);
- void (*mips_hpt_init)(unsigned int);
- 
-+extern __u32 get_htscl(void)
-+{
-+	return timerhi;
-+}
-+
-+static __u64 tscll_last = 0;
-+
-+extern __u64 get_tscll(void)
-+{
-+	__u64 h = (__u64) timerhi;
-+	__u32 c = read_c0_count();
-+
-+	h <<= 32;
-+	h += c;
-+
-+	while (h < tscll_last)
-+		h += (((__u64) 1) << 32);
-+
-+	tscll_last = h;
-+	return h;	
-+}
- 
- /*
-  * timeofday services, for syscalls.
-@@ -761,3 +782,5 @@
- EXPORT_SYMBOL(to_tm);
- EXPORT_SYMBOL(rtc_set_time);
- EXPORT_SYMBOL(rtc_get_time);
-+EXPORT_SYMBOL(get_htscl);
-+EXPORT_SYMBOL(get_tscll);
-diff -urN linux.old/include/asm-mips/timex.h linux.dev/include/asm-mips/timex.h
---- linux.old/include/asm-mips/timex.h	2005-11-14 11:06:38.685263500 +0100
-+++ linux.dev/include/asm-mips/timex.h	2005-11-14 11:02:21.069163500 +0100
-@@ -31,6 +31,19 @@
- 	return read_c0_count();
- }
- 
-+extern __u32 get_htscl(void);
-+extern __u64 get_tscll(void);
-+
-+#define rdtsc(low, high) \
-+		high = get_htscl(); \
-+		low = read_c0_count();
-+
-+#define rdtscl(low) \
-+		low = read_c0_count();
-+
-+#define rdtscll(val) \
-+		val = get_tscll();
-+
- #define vxtime_lock()		do {} while (0)
- #define vxtime_unlock()		do {} while (0)
- 
-diff -urN linux.old/include/net/pkt_sched.h linux.dev/include/net/pkt_sched.h
---- linux.old/include/net/pkt_sched.h	2005-11-14 11:06:38.709265000 +0100
-+++ linux.dev/include/net/pkt_sched.h	2005-11-14 11:02:21.069163500 +0100
-@@ -5,7 +5,11 @@
- #define PSCHED_JIFFIES 		2
- #define PSCHED_CPU 		3
- 
-+#ifdef __mips__
-+#define PSCHED_CLOCK_SOURCE	PSCHED_CPU
-+#else
- #define PSCHED_CLOCK_SOURCE	PSCHED_JIFFIES
-+#endif
- 
- #include <linux/config.h>
- #include <linux/types.h>
-@@ -271,7 +275,7 @@
- #define PSCHED_US2JIFFIE(delay) (((delay)+psched_clock_per_hz-1)/psched_clock_per_hz)
- #define PSCHED_JIFFIE2US(delay) ((delay)*psched_clock_per_hz)
- 
--#ifdef CONFIG_X86_TSC
-+#if defined(CONFIG_X86_TSC) || defined(__mips__)
- 
- #define PSCHED_GET_TIME(stamp) \
- ({ u64 __cur; \
diff --git a/openwrt/target/linux/aruba-2.6/Config.in b/openwrt/target/linux/aruba-2.6/Config.in
deleted file mode 100644
index c1fab56464..0000000000
--- a/openwrt/target/linux/aruba-2.6/Config.in
+++ /dev/null
@@ -1,4 +0,0 @@
-config BR2_ARUBA_RAMDISK
-	prompt "ramdisk support"
-	depends BR2_LINUX_2_6_ARUBA
-	bool
diff --git a/openwrt/target/linux/aruba-2.6/Makefile b/openwrt/target/linux/aruba-2.6/Makefile
deleted file mode 100644
index a05d278bae..0000000000
--- a/openwrt/target/linux/aruba-2.6/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-LINUX_VERSION:=2.6.16.7
-LINUX_RELEASE:=1
-LINUX_KERNEL_MD5SUM:=9682b2bd6e02f3087982d7c3f5ba824e
-
-include ../rules.mk
-include ./config
-
-include ../generic-$(KERNEL)/modules.mk
-include ../kernel.mk
-
-
-$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
-	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
-ifeq ($(BR2_ARUBA_RAMDISK),y)
-	@$(CP) config-ramdisk $(LINUX_DIR)/.config
-else
-	@$(CP) config $(LINUX_DIR)/.config
-endif
-	touch $@
-
diff --git a/openwrt/target/linux/aruba-2.6/config b/openwrt/target/linux/aruba-2.6/config
deleted file mode 100644
index d49ea058eb..0000000000
--- a/openwrt/target/linux/aruba-2.6/config
+++ /dev/null
@@ -1,1518 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Mon Mar 20 14:06:58 2006
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
-CONFIG_MACH_ARUBA=y
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_ADVANCED=y
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_WB is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_IPSEC_NAT_TRAVERSAL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_BRIDGE_NETFILTER is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CT_ACCT=y
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_SIP=m
-CONFIG_IP_NF_QUEUE=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_IMQ=m
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_TTL=m
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_ESFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_PEDIT=m
-# CONFIG_NET_ACT_SIMP is not set
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x1fc00000
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_IFB is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-# CONFIG_IMQ_BEHAVIOR_AA is not set
-# CONFIG_IMQ_BEHAVIOR_AB is not set
-CONFIG_IMQ_BEHAVIOR_BA=y
-# CONFIG_IMQ_BEHAVIOR_BB is not set
-CONFIG_IMQ_NUM_DEVS=2
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_AR2313=y
-CONFIG_IDT_RC32434_ETH=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA MIPS devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_OBSOLETE_OSS_USB_DRIVER=y
-CONFIG_USB_AUDIO=m
-# CONFIG_USB_MIDI is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/openwrt/target/linux/aruba-2.6/config-ramdisk b/openwrt/target/linux/aruba-2.6/config-ramdisk
deleted file mode 100644
index 69accc42e2..0000000000
--- a/openwrt/target/linux/aruba-2.6/config-ramdisk
+++ /dev/null
@@ -1,1520 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Mon Mar 20 14:06:58 2006
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
-CONFIG_MACH_ARUBA=y
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_ADVANCED=y
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_WB is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE="../root"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_SLAB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_SLOB=y
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_IPSEC_NAT_TRAVERSAL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_BRIDGE_NETFILTER is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CT_ACCT=y
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_SIP=m
-CONFIG_IP_NF_QUEUE=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_IMQ=m
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_TTL=m
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_ESFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_PEDIT=m
-# CONFIG_NET_ACT_SIMP is not set
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x1fc00000
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_IFB is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-# CONFIG_IMQ_BEHAVIOR_AA is not set
-# CONFIG_IMQ_BEHAVIOR_AB is not set
-CONFIG_IMQ_BEHAVIOR_BA=y
-# CONFIG_IMQ_BEHAVIOR_BB is not set
-CONFIG_IMQ_NUM_DEVS=2
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_AR2313=y
-CONFIG_IDT_RC32434_ETH=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA MIPS devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_OBSOLETE_OSS_USB_DRIVER=y
-CONFIG_USB_AUDIO=m
-# CONFIG_USB_MIDI is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/openwrt/target/linux/aruba-2.6/patches/000-aruba.patch b/openwrt/target/linux/aruba-2.6/patches/000-aruba.patch
deleted file mode 100644
index 7bb8a26d7f..0000000000
--- a/openwrt/target/linux/aruba-2.6/patches/000-aruba.patch
+++ /dev/null
@@ -1,10517 +0,0 @@
-diff -Nur linux-2.6.16/arch/mips/aruba/Makefile linux-2.6.16-owrt/arch/mips/aruba/Makefile
---- linux-2.6.16/arch/mips/aruba/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/aruba/Makefile	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,49 @@
-+###############################################################################
-+#
-+#  BRIEF MODULE DESCRIPTION
-+#     Makefile for IDT EB434 BSP
-+#
-+#  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+#
-+#  This program is free software; you can redistribute  it and/or modify it
-+#  under  the terms of  the GNU General  Public License as published by the
-+#  Free Software Foundation;  either version 2 of the  License, or (at your
-+#  option) any later version.
-+#
-+#  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+#  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+#   NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+#   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+#   NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+#   USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+#   ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+#   THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+#
-+#   You should have received a copy of the  GNU General Public License along
-+#   with this program; if not, write  to the Free Software Foundation, Inc.,
-+#   675 Mass Ave, Cambridge, MA 02139, USA.
-+# 
-+# 
-+###############################################################################
-+#  May 2004 rkt, neb
-+# 
-+#  Initial Release
-+# 
-+#  
-+# 
-+###############################################################################
-+
-+
-+# .S.s:
-+# 	$(CPP) $(CFLAGS) $< -o $*.s
-+# .S.o:
-+# 	$(CC) $(CFLAGS) -c $< -o $*.o
-+
-+obj-y	 := prom.o setup.o idtIRQ.o irq.o time.o flash_lock.o
-+obj-$(CONFIG_SERIAL_8250) 		+= serial.o
-+
-+subdir-y         += nvram
-+obj-y            += nvram/built-in.o
-+
-diff -Nur linux-2.6.16/arch/mips/aruba/nvram/Makefile linux-2.6.16-owrt/arch/mips/aruba/nvram/Makefile
---- linux-2.6.16/arch/mips/aruba/nvram/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/aruba/nvram/Makefile	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,46 @@
-+###############################################################################
-+#
-+#  BRIEF MODULE DESCRIPTION
-+#     Makefile for IDT EB434 nvram access routines
-+#
-+#  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+#
-+#  This program is free software; you can redistribute  it and/or modify it
-+#  under  the terms of  the GNU General  Public License as published by the
-+#  Free Software Foundation;  either version 2 of the  License, or (at your
-+#  option) any later version.
-+#
-+#  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+#  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+#   NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+#   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+#   NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+#   USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+#   ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+#   THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+#
-+#   You should have received a copy of the  GNU General Public License along
-+#   with this program; if not, write  to the Free Software Foundation, Inc.,
-+#   675 Mass Ave, Cambridge, MA 02139, USA.
-+#
-+#
-+###############################################################################
-+#  May 2004  rkt, neb
-+#
-+#  Initial Release
-+#
-+#
-+#
-+###############################################################################
-+
-+obj-y   := nvram434.o
-+obj-m   := $(O_TARGET)
-+
-+
-+
-+
-+
-+
-+
-diff -Nur linux-2.6.16/arch/mips/aruba/nvram/nvram434.c linux-2.6.16-owrt/arch/mips/aruba/nvram/nvram434.c
---- linux-2.6.16/arch/mips/aruba/nvram/nvram434.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/aruba/nvram/nvram434.c	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,392 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     nvram interface routines.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#include <linux/ctype.h>
-+#include <linux/string.h>
-+
-+//#include <asm/ds1553rtc.h>
-+#include "nvram434.h"
-+#define  NVRAM_BASE 0xbfff8000
-+
-+extern void setenv (char *e, char *v, int rewrite);
-+extern void unsetenv (char *e);
-+extern void mapenv (int (*func)(char *, char *));
-+extern char *getenv (char *s);
-+extern void purgeenv(void);
-+
-+static void nvram_initenv(void);
-+
-+static unsigned char
-+nvram_getbyte(int offs)
-+{
-+  return(*((unsigned char*)(NVRAM_BASE + offs)));
-+}
-+
-+static void
-+nvram_setbyte(int offs, unsigned char val)
-+{
-+  unsigned char* nvramDataPointer = (unsigned char*)(NVRAM_BASE + offs);
-+
-+  *nvramDataPointer = val;
-+}
-+
-+/*
-+ * BigEndian!
-+ */
-+static unsigned short
-+nvram_getshort(int offs)
-+{
-+  return((nvram_getbyte(offs) << 8) | nvram_getbyte(offs + 1));
-+}
-+
-+static void
-+nvram_setshort(int offs, unsigned short val)
-+{
-+  nvram_setbyte(offs, (unsigned char)((val >> 8) & 0xff));
-+  nvram_setbyte(offs + 1, (unsigned char)(val & 0xff));
-+}
-+#if 0
-+static unsigned int
-+nvram_getint(int offs)
-+{
-+  unsigned int val;
-+  val = nvram_getbyte(offs) << 24;
-+  val |= nvram_getbyte(offs + 1) << 16;
-+  val |= nvram_getbyte(offs + 2) << 8;
-+  val |= nvram_getbyte(offs + 3);
-+  return(val);
-+}
-+
-+static void
-+nvram_setint(int offs, unsigned int val)
-+{
-+  nvram_setbyte(offs, val >> 24);
-+  nvram_setbyte(offs + 1, val >> 16);
-+  nvram_setbyte(offs + 2, val >> 8);
-+  nvram_setbyte(offs + 3, val);
-+}
-+#endif
-+/*
-+ * calculate NVRAM checksum
-+ */
-+static unsigned short
-+nvram_calcsum(void)
-+{
-+  unsigned short sum = NV_MAGIC;
-+  int     i;
-+
-+  for (i = ENV_BASE; i < ENV_TOP; i += 2)
-+    sum += nvram_getshort(i);
-+  return(sum);
-+}
-+
-+/*
-+ * update the nvram checksum
-+ */
-+static void
-+nvram_updatesum (void)
-+{
-+  nvram_setshort(NVOFF_CSUM, nvram_calcsum());
-+}
-+
-+/*
-+ * test validity of nvram by checksumming it
-+ */
-+static int
-+nvram_isvalid(void)
-+{
-+  static int  is_valid;
-+
-+  if (is_valid)
-+    return(1);
-+
-+  if (nvram_getshort(NVOFF_MAGIC) != NV_MAGIC) {
-+	printk("nvram_isvalid FAILED\n");
-+    //nvram_initenv();
-+  }
-+  is_valid = 1;
-+  return(1);
-+}
-+
-+/* return nvram address of environment string */
-+static int
-+nvram_matchenv(char *s)
-+{
-+  int envsize, envp, n, i, varsize;
-+  char *var;
-+
-+  envsize = nvram_getshort(NVOFF_ENVSIZE);
-+
-+  if (envsize > ENV_AVAIL)
-+    return(0);     /* sanity */
-+    
-+  envp = ENV_BASE;
-+
-+  if ((n = strlen (s)) > 255)
-+    return(0);
-+    
-+  while (envsize > 0) {
-+    varsize = nvram_getbyte(envp);
-+    if (varsize == 0 || (envp + varsize) > ENV_TOP)
-+      return(0);   /* sanity */
-+    for (i = envp + 1, var = s; i <= envp + n; i++, var++) {
-+      char c1 = nvram_getbyte(i);
-+      char c2 = *var;
-+      if (islower(c1))
-+        c1 = toupper(c1);
-+      if (islower(c2))
-+        c2 = toupper(c2);
-+      if (c1 != c2)
-+        break;
-+    }
-+    if (i > envp + n) {       /* match so far */
-+      if (n == varsize - 1)   /* match on boolean */
-+        return(envp);
-+      if (nvram_getbyte(i) == '=')  /* exact match on variable */
-+        return(envp);
-+    }
-+    envsize -= varsize;
-+    envp += varsize;
-+  }
-+  return(0);
-+}
-+
-+static void nvram_initenv(void)
-+{
-+  nvram_setshort(NVOFF_MAGIC, NV_MAGIC);
-+  nvram_setshort(NVOFF_ENVSIZE, 0);
-+
-+  nvram_updatesum();
-+}
-+
-+static void
-+nvram_delenv(char *s)
-+{
-+  int nenvp, envp, envsize, nbytes;
-+
-+  envp = nvram_matchenv(s);
-+  if (envp == 0)
-+    return;
-+
-+  nenvp = envp + nvram_getbyte(envp);
-+  envsize = nvram_getshort(NVOFF_ENVSIZE);
-+  nbytes = envsize - (nenvp - ENV_BASE);
-+  nvram_setshort(NVOFF_ENVSIZE, envsize - (nenvp - envp));
-+  while (nbytes--) {
-+    nvram_setbyte(envp, nvram_getbyte(nenvp));
-+    envp++;
-+    nenvp++;
-+  }
-+  nvram_updatesum();
-+}
-+
-+static int
-+nvram_setenv(char *s, char *v)
-+{
-+  int ns, nv, total;
-+  int envp;
-+
-+  if (!nvram_isvalid())
-+    return(-1);
-+
-+  nvram_delenv(s);
-+  ns = strlen(s);
-+  if (ns == 0)
-+    return (-1);
-+  if (v && *v) {
-+    nv = strlen(v);
-+    total = ns + nv + 2;
-+  }
-+  else {
-+    nv = 0;
-+    total = ns + 1;
-+  }
-+  if (total > 255 || total > ENV_AVAIL - nvram_getshort(NVOFF_ENVSIZE))
-+    return(-1);
-+
-+  envp = ENV_BASE + nvram_getshort(NVOFF_ENVSIZE);
-+
-+  nvram_setbyte(envp, (unsigned char) total); 
-+  envp++;
-+
-+  while (ns--) {
-+    nvram_setbyte(envp, *s); 
-+    envp++; 
-+    s++;
-+  }
-+
-+  if (nv) {
-+    nvram_setbyte(envp, '='); 
-+    envp++;
-+    while (nv--) {
-+      nvram_setbyte(envp, *v); 
-+      envp++; 
-+      v++;
-+    }
-+  }
-+  nvram_setshort(NVOFF_ENVSIZE, envp-ENV_BASE);
-+  nvram_updatesum();
-+  return 0;
-+}
-+
-+static char *
-+nvram_getenv(char *s)
-+{
-+  static char buf[256];   /* FIXME: this cannot be static */
-+  int envp, ns, nbytes, i;
-+
-+  if (!nvram_isvalid())
-+    return "INVALID NVRAM"; //((char *)0);
-+
-+  envp = nvram_matchenv(s);
-+  if (envp == 0)
-+    return "NOT FOUND"; //((char *)0);
-+  ns = strlen(s);
-+  if (nvram_getbyte(envp) == ns + 1)  /* boolean */
-+    buf[0] = '\0';
-+  else {
-+    nbytes = nvram_getbyte(envp) - (ns + 2);
-+    envp += ns + 2;
-+    for (i = 0; i < nbytes; i++)
-+      buf[i] = nvram_getbyte(envp++);
-+    buf[i] = '\0';
-+  }
-+  return(buf);
-+}
-+
-+static void
-+nvram_unsetenv(char *s)
-+{
-+  if (!nvram_isvalid())
-+    return;
-+
-+  nvram_delenv(s);
-+}
-+
-+/*
-+ * apply func to each string in environment
-+ */
-+static void
-+nvram_mapenv(int (*func)(char *, char *))
-+{
-+  int envsize, envp, n, i, seeneql;
-+  char name[256], value[256];
-+  char c, *s;
-+
-+  if (!nvram_isvalid())
-+    return;
-+
-+  envsize = nvram_getshort(NVOFF_ENVSIZE);
-+  envp = ENV_BASE;
-+
-+  while (envsize > 0) {
-+    value[0] = '\0';
-+    seeneql = 0;
-+    s = name;
-+    n = nvram_getbyte(envp);
-+    for (i = envp + 1; i < envp + n; i++) {
-+      c = nvram_getbyte(i);
-+      if ((c == '=') && !seeneql) {
-+        *s = '\0';
-+        s = value;
-+        seeneql = 1;
-+        continue;
-+      }
-+      *s++ = c;
-+    }
-+    *s = '\0';
-+    (*func)(name, value);
-+    envsize -= n;
-+    envp += n;
-+  }
-+}
-+#if 0
-+static unsigned int
-+digit(char c)
-+{
-+  if ('0' <= c && c <= '9')
-+    return (c - '0');
-+  if ('A' <= c && c <= 'Z')
-+    return (10 + c - 'A');
-+  if ('a' <= c && c <= 'z')
-+    return (10 + c - 'a');
-+  return (~0);
-+}
-+#endif
-+/*
-+ * Wrappers to allow 'special' environment variables to get processed
-+ */
-+void
-+setenv(char *e, char *v, int rewrite)
-+{
-+  if (nvram_getenv(e) && !rewrite)
-+    return;
-+    
-+  nvram_setenv(e, v);
-+}
-+
-+char *
-+getenv(char *e)
-+{
-+  return(nvram_getenv(e));
-+}
-+
-+void
-+unsetenv(char *e)
-+{
-+  nvram_unsetenv(e);
-+}
-+
-+void
-+purgeenv()
-+{
-+  int i;
-+  unsigned char* nvramDataPointer = (unsigned char*)(NVRAM_BASE);
-+  
-+  for (i = ENV_BASE; i < ENV_TOP; i++)
-+    *nvramDataPointer++ = 0;
-+  nvram_setshort(NVOFF_MAGIC, NV_MAGIC);
-+  nvram_setshort(NVOFF_ENVSIZE, 0);
-+  nvram_setshort(NVOFF_CSUM, NV_MAGIC);
-+}
-+
-+void
-+mapenv(int (*func)(char *, char *))
-+{
-+  nvram_mapenv(func);
-+}
-diff -Nur linux-2.6.16/arch/mips/aruba/nvram/nvram434.h linux-2.6.16-owrt/arch/mips/aruba/nvram/nvram434.h
---- linux-2.6.16/arch/mips/aruba/nvram/nvram434.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/aruba/nvram/nvram434.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,66 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     nvram definitions.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+
-+#ifndef _NVRAM_
-+#define _NVRAM_
-+#define NVOFFSET        0                 /* use all of NVRAM */
-+
-+/* Offsets to reserved locations */
-+              /* size description */
-+#define NVOFF_MAGIC     (NVOFFSET + 0)    /* 2 magic value */
-+#define NVOFF_CSUM      (NVOFFSET + 2)    /* 2 NVRAM environment checksum */
-+#define NVOFF_ENVSIZE   (NVOFFSET + 4)    /* 2 size of 'environment' */
-+#define NVOFF_TEST      (NVOFFSET + 5)    /* 1 cold start test byte */
-+#define NVOFF_ETHADDR   (NVOFFSET + 6)    /* 6 decoded ethernet address */
-+#define NVOFF_UNUSED    (NVOFFSET + 12)   /* 0 current end of table */
-+
-+#define NV_MAGIC        0xdeaf            /* nvram magic number */
-+#define NV_RESERVED     6                 /* number of reserved bytes */
-+
-+#undef  NVOFF_ETHADDR
-+#define NVOFF_ETHADDR   (NVOFFSET + NV_RESERVED - 6)
-+
-+/* number of bytes available for environment */
-+#define ENV_BASE        (NVOFFSET + NV_RESERVED)
-+#define ENV_TOP         0x2000
-+#define ENV_AVAIL       (ENV_TOP - ENV_BASE)
-+
-+#endif /* _NVRAM_ */
-+
-+
-diff -Nur linux-2.6.16/arch/mips/aruba/prom.c linux-2.6.16-owrt/arch/mips/aruba/prom.c
---- linux-2.6.16/arch/mips/aruba/prom.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/aruba/prom.c	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,111 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     prom interface routines
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/string.h>
-+#include <linux/console.h>
-+#include <asm/bootinfo.h>
-+#include <linux/bootmem.h>
-+#include <linux/ioport.h>
-+#include <linux/serial.h>
-+#include <linux/serialP.h>
-+#include <asm/serial.h>
-+#include <linux/ioport.h>
-+
-+unsigned int idt_cpu_freq;
-+EXPORT_SYMBOL(idt_cpu_freq);
-+
-+unsigned int arch_has_pci=0;
-+
-+/* Kernel Boot parameters */
-+static unsigned char bootparm[] = "console=ttyS0,9600 root=/dev/mtdblock1 rootfstype=jffs2";
-+
-+extern unsigned long mips_machgroup;
-+extern unsigned long mips_machtype;
-+
-+extern void setup_serial_port(void);
-+extern char * getenv(char *e);
-+
-+/* IDT 79EB434 memory map -- we really should be auto sizing it */
-+#define RAM_SIZE        32*1024*1024
-+
-+char *__init prom_getcmdline(void)
-+{
-+	return &(arcs_cmdline[0]);
-+}
-+
-+void __init prom_init(void)
-+{
-+	char *boardname;
-+	sprintf(arcs_cmdline, "%s", bootparm);
-+
-+	/* set our arch type */
-+	mips_machgroup = MACH_GROUP_ARUBA;
-+	mips_machtype = MACH_ARUBA_UNKNOWN;
-+
-+	boardname=getenv("boardname");
-+
-+	if (!strcmp(boardname,"Muscat")) {
-+		mips_machtype = MACH_ARUBA_AP70;
-+		idt_cpu_freq = 133000000;
-+		arch_has_pci=1;
-+	} else if (!strcmp(boardname,"Mataro")) {
-+		mips_machtype = MACH_ARUBA_AP65;
-+		idt_cpu_freq = 110000000;
-+	} else if (!strcmp(boardname,"Merlot")) {
-+		mips_machtype = MACH_ARUBA_AP60;
-+		idt_cpu_freq = 90000000;
-+	}
-+
-+	/* turn on the console */
-+	setup_serial_port();
-+
-+	/*
-+	 * give all RAM to boot allocator,
-+	 * except where the kernel was loaded
-+	 */
-+	add_memory_region(0,RAM_SIZE,BOOT_MEM_RAM);
-+}
-+
-+void prom_free_prom_memory(void)
-+{
-+	printk("stubbed prom_free_prom_memory()\n");
-+}
-diff -Nur linux-2.6.16/arch/mips/aruba/serial.c linux-2.6.16-owrt/arch/mips/aruba/serial.c
---- linux-2.6.16/arch/mips/aruba/serial.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/aruba/serial.c	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,94 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     Serial port initialisation.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+#include <linux/tty.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+
-+#include <asm/time.h>
-+#include <asm/cpu.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/serial.h>
-+
-+#include <asm/idt-boards/rc32434/rc32434.h>
-+
-+extern int __init early_serial_setup(struct uart_port *port);
-+
-+#define BASE_BAUD (1843200 / 16)
-+
-+extern unsigned int idt_cpu_freq;
-+
-+extern int __init setup_serial_port(void)
-+{
-+	static struct uart_port serial_req[2];
-+	
-+	memset(serial_req, 0, sizeof(serial_req));
-+	serial_req[0].type       = PORT_16550A;
-+	serial_req[0].line       = 0;
-+	serial_req[0].flags      = STD_COM_FLAGS;
-+	serial_req[0].iotype     = SERIAL_IO_MEM;
-+	serial_req[0].regshift   = 2;
-+	
-+	switch (mips_machtype) {
-+		case MACH_ARUBA_AP70:
-+			serial_req[0].irq        = 104;
-+			serial_req[0].mapbase    = KSEG1ADDR(0x18058003);
-+			serial_req[0].membase    = (char *) KSEG1ADDR(0x18058003);
-+			serial_req[0].uartclk    = idt_cpu_freq;
-+			break;
-+		case MACH_ARUBA_AP65:
-+		case MACH_ARUBA_AP60:
-+		default:
-+			serial_req[0].irq        = 12;
-+			serial_req[0].mapbase    = KSEG1ADDR(0xbc000003);
-+			serial_req[0].membase    = (char *) KSEG1ADDR(0xbc000003);
-+			serial_req[0].uartclk    = idt_cpu_freq / 2;
-+			break;
-+	}
-+
-+	early_serial_setup(&serial_req[0]);
-+	
-+	return(0);
-+}
-diff -Nur linux-2.6.16/arch/mips/aruba/setup.c linux-2.6.16-owrt/arch/mips/aruba/setup.c
---- linux-2.6.16/arch/mips/aruba/setup.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/aruba/setup.c	2006-03-20 14:30:00.000000000 +0100
-@@ -0,0 +1,125 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     setup routines for IDT EB434 boards
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mm.h>
-+#include <linux/sched.h>
-+#include <linux/irq.h>
-+#include <asm/bootinfo.h>
-+#include <asm/io.h>
-+#include <linux/ioport.h>
-+#include <asm/mipsregs.h>
-+#include <asm/pgtable.h>
-+#include <asm/reboot.h>
-+#include <asm/addrspace.h>	/* for KSEG1ADDR() */
-+#include <asm/idt-boards/rc32434/rc32434.h>
-+#include <linux/pm.h>
-+
-+extern char *__init prom_getcmdline(void);
-+
-+extern void (*board_time_init) (void);
-+extern void (*board_timer_setup) (struct irqaction * irq);
-+extern void aruba_time_init(void);
-+extern void aruba_timer_setup(struct irqaction *irq);
-+extern void aruba_reset(void);
-+
-+#define epldMask ((volatile unsigned char *)0xB900000d)
-+
-+static void aruba_machine_restart(char *command)
-+{
-+	switch (mips_machtype) {
-+		case MACH_ARUBA_AP70:
-+			*(volatile u32 *)KSEG1ADDR(0x18008000) = 0x80000001;
-+			break;
-+		case MACH_ARUBA_AP65:
-+		case MACH_ARUBA_AP60:
-+		default:
-+			/* Reset*/
-+			*((volatile u32 *)KSEG1ADDR(0x1c003020)) = 0x00080350; // reset everything in sight
-+			udelay(100);
-+			*((volatile u32 *)KSEG1ADDR(0x1c003020)) = 0; // reset everything in sight
-+			udelay(100);
-+			*((volatile u32 *)KSEG1ADDR(0x1c003020)) = 0x3; // cold reset the cpu & system
-+			break;
-+	}
-+}
-+
-+static void aruba_machine_halt(void)
-+{
-+	for (;;) continue;
-+}
-+
-+extern char * getenv(char *e);
-+extern void unlock_ap60_70_flash(void);
-+
-+void __init plat_setup(void)
-+{
-+	board_time_init = aruba_time_init;
-+
-+	board_timer_setup = aruba_timer_setup;
-+
-+	_machine_restart = aruba_machine_restart;
-+	_machine_halt = aruba_machine_halt;
-+	pm_power_off = aruba_machine_halt;
-+
-+	set_io_port_base(KSEG1);
-+
-+	/* Enable PCI interrupts in EPLD Mask register */
-+	*epldMask = 0x0;
-+	*(epldMask + 1) = 0x0;
-+
-+	write_c0_wired(0);
-+	unlock_ap60_70_flash();
-+
-+	printk("BOARD - %s\n",getenv("boardname"));
-+
-+	return 0;
-+}
-+
-+int page_is_ram(unsigned long pagenr)
-+{
-+	return 1;
-+}
-+
-+const char *get_system_type(void)
-+{
-+	return "MIPS IDT32434 - ARUBA";
-+}
-+
-+EXPORT_SYMBOL(get_system_type);
-diff -Nur linux-2.6.16/arch/mips/aruba/time.c linux-2.6.16-owrt/arch/mips/aruba/time.c
---- linux-2.6.16/arch/mips/aruba/time.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/aruba/time.c	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,108 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     timer routines for IDT EB434 boards
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/sched.h>
-+#include <linux/spinlock.h>
-+#include <linux/mc146818rtc.h>
-+#include <linux/irq.h>
-+#include <linux/timex.h>
-+
-+#include <linux/param.h>
-+#include <asm/mipsregs.h>
-+#include <asm/ptrace.h>
-+#include <asm/time.h>
-+#include <asm/hardirq.h>
-+
-+#include <asm/mipsregs.h>
-+#include <asm/ptrace.h>
-+#include <asm/debug.h>
-+#include <asm/time.h>
-+
-+#include <asm/idt-boards/rc32434/rc32434.h>
-+
-+static unsigned long r4k_offset;	/* Amount to incr compare reg each time */
-+static unsigned long r4k_cur;	/* What counter should be at next timer irq */
-+
-+extern unsigned int idt_cpu_freq;
-+
-+static unsigned long __init cal_r4koff(void)
-+{
-+	mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2;
-+	return (mips_hpt_frequency / HZ);
-+}
-+
-+void __init aruba_time_init(void)
-+{
-+	unsigned int est_freq, flags;
-+	local_irq_save(flags);
-+
-+	printk("calculating r4koff... ");
-+	r4k_offset = cal_r4koff();
-+	printk("%08lx(%d)\n", r4k_offset, (int)r4k_offset);
-+
-+	est_freq = 2 * r4k_offset * HZ;
-+	est_freq += 5000;	/* round */
-+	est_freq -= est_freq % 10000;
-+	printk("CPU frequency %d.%02d MHz\n", est_freq / 1000000,
-+	       (est_freq % 1000000) * 100 / 1000000);
-+	local_irq_restore(flags);
-+
-+}
-+
-+void __init aruba_timer_setup(struct irqaction *irq)
-+{
-+	/* we are using the cpu counter for timer interrupts */
-+	setup_irq(MIPS_CPU_TIMER_IRQ, irq);
-+
-+	/* to generate the first timer interrupt */
-+	r4k_cur = (read_c0_count() + r4k_offset);
-+	write_c0_compare(r4k_cur);
-+
-+}
-+
-+asmlinkage void aruba_timer_interrupt(int irq, struct pt_regs *regs)
-+{
-+	irq_enter();
-+	kstat_this_cpu.irqs[irq]++;
-+
-+	timer_interrupt(irq, NULL, regs);
-+	irq_exit();
-+}
-diff -Nur linux-2.6.16/arch/mips/Kconfig linux-2.6.16-owrt/arch/mips/Kconfig
---- linux-2.6.16/arch/mips/Kconfig	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/Kconfig	2006-03-20 14:25:10.000000000 +0100
-@@ -227,6 +227,17 @@
- 	  either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
- 	  a kernel for this platform.
- 
-+config MACH_ARUBA
-+	bool "Support for the ARUBA product line"
-+	select DMA_NONCOHERENT
-+	select CPU_HAS_PREFETCH
-+	select HW_HAS_PCI
-+	select SWAP_IO_SPACE
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+
-+
- config MACH_JAZZ
- 	bool "Support for the Jazz family of machines"
- 	select ARC
-diff -Nur linux-2.6.16/arch/mips/Makefile linux-2.6.16-owrt/arch/mips/Makefile
---- linux-2.6.16/arch/mips/Makefile	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/Makefile	2006-03-20 14:25:10.000000000 +0100
-@@ -279,6 +279,14 @@
- #
- 
- #
-+# Aruba
-+#
-+
-+core-$(CONFIG_MACH_ARUBA)	+= arch/mips/aruba/
-+cflags-$(CONFIG_MACH_ARUBA)	+= -Iinclude/asm-mips/aruba
-+load-$(CONFIG_MACH_ARUBA)	+= 0x80100000
-+
-+#
- # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
- #
- core-$(CONFIG_MACH_JAZZ)	+= arch/mips/jazz/
-diff -Nur linux-2.6.16/arch/mips/mm/tlbex.c linux-2.6.16-owrt/arch/mips/mm/tlbex.c
---- linux-2.6.16/arch/mips/mm/tlbex.c	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/mm/tlbex.c	2006-03-20 14:25:10.000000000 +0100
-@@ -852,7 +852,6 @@
- 
- 	case CPU_R10000:
- 	case CPU_R12000:
--	case CPU_4KC:
- 	case CPU_SB1:
- 	case CPU_SB1A:
- 	case CPU_4KSC:
-@@ -880,6 +879,7 @@
- 		tlbw(p);
- 		break;
- 
-+	case CPU_4KC:
- 	case CPU_4KEC:
- 	case CPU_24K:
- 	case CPU_34K:
-diff -Nur linux-2.6.16/drivers/net/Kconfig linux-2.6.16-owrt/drivers/net/Kconfig
---- linux-2.6.16/drivers/net/Kconfig	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/drivers/net/Kconfig	2006-03-20 14:25:10.000000000 +0100
-@@ -187,6 +187,13 @@
- 
- source "drivers/net/arm/Kconfig"
- 
-+config IDT_RC32434_ETH
-+        tristate "IDT RC32434 Local Ethernet support"
-+        depends on NET_ETHERNET
-+        help
-+        IDT RC32434 has one local ethernet port. Say Y here to enable it.
-+        To compile this driver as a module, choose M here.
-+
- config MACE
- 	tristate "MACE (Power Mac ethernet) support"
- 	depends on NET_ETHERNET && PPC_PMAC && PPC32
-diff -Nur linux-2.6.16/drivers/net/Makefile linux-2.6.16-owrt/drivers/net/Makefile
---- linux-2.6.16/drivers/net/Makefile	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/drivers/net/Makefile	2006-03-20 14:25:10.000000000 +0100
-@@ -38,6 +38,7 @@
- 
- obj-$(CONFIG_OAKNET) += oaknet.o 8390.o
- 
-+obj-$(CONFIG_IDT_RC32434_ETH) += rc32434_eth.o
- obj-$(CONFIG_DGRS) += dgrs.o
- obj-$(CONFIG_VORTEX) += 3c59x.o
- obj-$(CONFIG_TYPHOON) += typhoon.o
-diff -Nur linux-2.6.16/drivers/net/natsemi.c linux-2.6.16-owrt/drivers/net/natsemi.c
---- linux-2.6.16/drivers/net/natsemi.c	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/drivers/net/natsemi.c	2006-03-20 14:25:10.000000000 +0100
-@@ -771,6 +771,49 @@
- static int netdev_get_eeprom(struct net_device *dev, u8 *buf);
- static struct ethtool_ops ethtool_ops;
- 
-+#ifdef CONFIG_MACH_ARUBA
-+
-+#include <linux/ctype.h>
-+
-+#ifndef ERR
-+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-+#endif
-+
-+static int parse_mac_addr(struct net_device *dev, char* macstr)
-+{
-+        int i, j;
-+        unsigned char result, value;
-+
-+        for (i=0; i<6; i++) {
-+                result = 0;
-+                if (i != 5 && *(macstr+2) != ':') {
-+                        ERR("invalid mac address format: %d %c\n",
-+                            i, *(macstr+2));
-+                        return -EINVAL;
-+                }
-+                for (j=0; j<2; j++) {
-+                        if (isxdigit(*macstr) && (value = isdigit(*macstr) ? *macstr-'0' :
-+                                                  toupper(*macstr)-'A'+10) < 16) {
-+                                result = result*16 + value;
-+                                macstr++;
-+                        }
-+                        else {
-+                                ERR("invalid mac address "
-+                                    "character: %c\n", *macstr);
-+                                return -EINVAL;
-+                        }
-+                }
-+
-+                macstr++;
-+                dev->dev_addr[i] = result;
-+        }
-+
-+	dev->dev_addr[5]++;
-+        return 0;
-+}
-+
-+#endif
-+
- static inline void __iomem *ns_ioaddr(struct net_device *dev)
- {
- 	return (void __iomem *) dev->base_addr;
-@@ -859,6 +902,7 @@
- 		goto err_ioremap;
- 	}
- 
-+#ifndef CONFIG_MACH_ARUBA
- 	/* Work around the dropped serial bit. */
- 	prev_eedata = eeprom_read(ioaddr, 6);
- 	for (i = 0; i < 3; i++) {
-@@ -867,6 +911,19 @@
- 		dev->dev_addr[i*2+1] = eedata >> 7;
- 		prev_eedata = eedata;
- 	}
-+#else
-+	{
-+		char mac[32];
-+		unsigned char def_mac[6] = {00, 0x0b, 0x86, 0xba, 0xdb, 0xad};
-+		extern char *getenv(char *e);
-+		memset(mac, 0, 32);
-+		memcpy(mac, getenv("ethaddr"), 17);
-+		if (parse_mac_addr(dev, mac)){
-+			printk("%s: MAC address not found\n", __func__);
-+			memcpy(dev->dev_addr, def_mac, 6);
-+		}
-+	}
-+#endif
- 
- 	dev->base_addr = (unsigned long __force) ioaddr;
- 	dev->irq = irq;
-diff -Nur linux-2.6.16/drivers/net/rc32434_eth.c linux-2.6.16-owrt/drivers/net/rc32434_eth.c
---- linux-2.6.16/drivers/net/rc32434_eth.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/drivers/net/rc32434_eth.c	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,1268 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     Driver for the IDT RC32434 on-chip ethernet controller.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Based on the driver developed by B. Maruthanayakam, H. Kou and others.
-+ *
-+ * Aug 2004 Sadik
-+ *
-+ * Added NAPI
-+ *
-+ **************************************************************************
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/moduleparam.h>
-+#include <linux/sched.h>
-+#include <linux/ctype.h>
-+#include <linux/types.h>
-+#include <linux/fcntl.h>
-+#include <linux/interrupt.h>
-+#include <linux/ptrace.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/proc_fs.h>
-+#include <linux/in.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+#include <linux/delay.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/errno.h>
-+#include <asm/bootinfo.h>
-+#include <asm/system.h>
-+#include <asm/bitops.h>
-+#include <asm/pgtable.h>
-+#include <asm/segment.h>
-+#include <asm/io.h>
-+#include <asm/dma.h>
-+
-+#include "rc32434_eth.h"
-+
-+#define DRIVER_VERSION "(mar2904)"
-+
-+#define DRIVER_NAME "rc32434 Ethernet driver. " DRIVER_VERSION
-+
-+
-+#define STATION_ADDRESS_HIGH(dev) (((dev)->dev_addr[0] << 8) | \
-+			           ((dev)->dev_addr[1]))
-+#define STATION_ADDRESS_LOW(dev)  (((dev)->dev_addr[2] << 24) | \
-+				   ((dev)->dev_addr[3] << 16) | \
-+				   ((dev)->dev_addr[4] << 8)  | \
-+				   ((dev)->dev_addr[5]))
-+
-+#define MII_CLOCK 1250000 				/* no more than 2.5MHz */
-+static char mac0[18] = "08:00:06:05:40:01"; 
-+
-+MODULE_PARM(mac0, "c18");
-+MODULE_PARM_DESC(mac0, "MAC address for RC32434 ethernet0");
-+
-+static struct rc32434_if_t {
-+	char *name;
-+	struct net_device *dev;
-+	char* mac_str;
-+	int weight;
-+	u32 iobase;
-+	u32 rxdmabase;
-+	u32 txdmabase;
-+	int rx_dma_irq;
-+	int tx_dma_irq;
-+	int rx_ovr_irq;
-+	int tx_und_irq;			
-+} rc32434_iflist[] = 
-+{
-+	{
-+		"rc32434_eth0",      NULL,       mac0, 
-+		64,
-+		ETH0_PhysicalAddress,
-+		ETH0_RX_DMA_ADDR,
-+		ETH0_TX_DMA_ADDR,
-+		ETH0_DMA_RX_IRQ,
-+		ETH0_DMA_TX_IRQ,
-+		ETH0_RX_OVR_IRQ,
-+		ETH0_TX_UND_IRQ
-+	}
-+};
-+
-+
-+static int parse_mac_addr(struct net_device *dev, char* macstr)
-+{
-+	int i, j;
-+	unsigned char result, value;
-+	
-+	for (i=0; i<6; i++) {
-+		result = 0;
-+		if (i != 5 && *(macstr+2) != ':') {
-+			ERR("invalid mac address format: %d %c\n",
-+			    i, *(macstr+2));
-+			return -EINVAL;
-+		}				
-+		for (j=0; j<2; j++) {
-+			if (isxdigit(*macstr) && (value = isdigit(*macstr) ? *macstr-'0' : 
-+						  toupper(*macstr)-'A'+10) < 16) {
-+				result = result*16 + value;
-+				macstr++;
-+			} 
-+			else {
-+				ERR("invalid mac address "
-+				    "character: %c\n", *macstr);
-+				return -EINVAL;
-+			}
-+		}
-+		
-+		macstr++; 
-+		dev->dev_addr[i] = result;
-+	}
-+	
-+	return 0;
-+}
-+
-+
-+
-+static inline void rc32434_abort_tx(struct net_device *dev)
-+{
-+	struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-+	rc32434_abort_dma(dev, lp->tx_dma_regs);
-+	
-+}
-+
-+static inline void rc32434_abort_rx(struct net_device *dev)
-+{
-+	struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-+	rc32434_abort_dma(dev, lp->rx_dma_regs);
-+	
-+}
-+
-+static inline void rc32434_start_tx(struct rc32434_local *lp,  volatile DMAD_t td)
-+{
-+	rc32434_start_dma(lp->tx_dma_regs, CPHYSADDR(td));
-+}
-+
-+static inline void rc32434_start_rx(struct rc32434_local *lp, volatile DMAD_t rd)
-+{
-+	rc32434_start_dma(lp->rx_dma_regs, CPHYSADDR(rd));
-+}
-+
-+static inline void rc32434_chain_tx(struct rc32434_local *lp, volatile DMAD_t td)
-+{
-+	rc32434_chain_dma(lp->tx_dma_regs, CPHYSADDR(td));
-+}
-+
-+static inline void rc32434_chain_rx(struct rc32434_local *lp, volatile DMAD_t rd)
-+{
-+	rc32434_chain_dma(lp->rx_dma_regs, CPHYSADDR(rd));
-+}
-+
-+#ifdef RC32434_PROC_DEBUG
-+static int rc32434_read_proc(char *buf, char **start, off_t fpos,
-+			     int length, int *eof, void *data)
-+{
-+	struct net_device *dev = (struct net_device *)data;
-+	struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-+	int len = 0;
-+	
-+	/* print out header */
-+	len += sprintf(buf + len, "\n\tRC32434 Ethernet Debug\n\n");
-+	len += sprintf (buf + len,
-+			"DMA halt count      = %10d, DMA run count = %10d\n",
-+			lp->dma_halt_cnt, lp->dma_run_cnt);
-+	
-+	if (fpos >= len) {
-+		*start = buf;
-+		*eof = 1;
-+		return 0;
-+	}
-+	*start = buf + fpos;
-+	
-+	if ((len -= fpos) > length) 
-+		return length;	
-+	*eof = 1;
-+	
-+	return len;
-+	
-+}
-+#endif
-+
-+
-+/*
-+ * Restart the RC32434 ethernet controller. 
-+ */
-+static int rc32434_restart(struct net_device *dev)
-+{
-+	struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-+	
-+	/*
-+	 * Disable interrupts
-+	 */
-+	disable_irq(lp->rx_irq);
-+	disable_irq(lp->tx_irq);
-+#ifdef	RC32434_REVISION
-+	disable_irq(lp->ovr_irq);
-+#endif	
-+	disable_irq(lp->und_irq);
-+	
-+	/* Mask F E bit in Tx DMA */
-+	rc32434_writel(rc32434_readl(&lp->tx_dma_regs->dmasm) | DMASM_f_m | DMASM_e_m, &lp->tx_dma_regs->dmasm);
-+	/* Mask D H E bit in Rx DMA */
-+	rc32434_writel(rc32434_readl(&lp->rx_dma_regs->dmasm) | DMASM_d_m | DMASM_h_m | DMASM_e_m, &lp->rx_dma_regs->dmasm);
-+	
-+	rc32434_init(dev);
-+	rc32434_multicast_list(dev);
-+	
-+	enable_irq(lp->und_irq);
-+#ifdef	RC32434_REVISION
-+	enable_irq(lp->ovr_irq);
-+#endif
-+	enable_irq(lp->tx_irq);
-+	enable_irq(lp->rx_irq);
-+	
-+	return 0;
-+}
-+
-+int rc32434_init_module(void)
-+{
-+#ifdef CONFIG_MACH_ARUBA
-+	if (mips_machtype != MACH_ARUBA_AP70)
-+		return 1;
-+#endif
-+
-+	printk(KERN_INFO DRIVER_NAME " \n");
-+	return rc32434_probe(0);
-+}
-+
-+static int rc32434_probe(int port_num)
-+{
-+	struct rc32434_if_t *bif = &rc32434_iflist[port_num];
-+	struct rc32434_local *lp = NULL;
-+	struct net_device *dev = NULL;
-+	int i, retval,err;
-+	
-+	dev = alloc_etherdev(sizeof(struct rc32434_local));
-+	if(!dev) {
-+		ERR("rc32434_eth: alloc_etherdev failed\n");
-+		return -1;
-+	}
-+	
-+	SET_MODULE_OWNER(dev);
-+	bif->dev = dev;
-+
-+#ifdef CONFIG_MACH_ARUBA
-+	{
-+		extern char * getenv(char *e);
-+		memcpy(bif->mac_str, getenv("ethaddr"), 17);
-+	}
-+#endif
-+	
-+	printk("mac: %s\n", bif->mac_str);
-+	if ((retval = parse_mac_addr(dev, bif->mac_str))) {
-+		ERR("MAC address parse failed\n");
-+		free_netdev(dev);
-+		return -1;
-+	}
-+	
-+	
-+	/* Initialize the device structure. */
-+	if (dev->priv == NULL) {
-+		lp = (struct rc32434_local *)kmalloc(sizeof(*lp), GFP_KERNEL);
-+		memset(lp, 0, sizeof(struct rc32434_local));
-+	} 
-+	else {
-+		lp = (struct rc32434_local *)dev->priv;
-+	}
-+	
-+	lp->rx_irq = bif->rx_dma_irq;
-+	lp->tx_irq = bif->tx_dma_irq;
-+	lp->ovr_irq = bif->rx_ovr_irq;
-+	lp->und_irq = bif->tx_und_irq;
-+	
-+	lp->eth_regs = ioremap_nocache(bif->iobase, sizeof(*lp->eth_regs));
-+
-+	if (!lp->eth_regs) {
-+		ERR("Can't remap eth registers\n");
-+		retval = -ENXIO;
-+		goto probe_err_out;
-+	}
-+	
-+	lp->rx_dma_regs = ioremap_nocache(bif->rxdmabase, sizeof(struct DMA_Chan_s));
-+	
-+	if (!lp->rx_dma_regs) {
-+		ERR("Can't remap Rx DMA registers\n");
-+		retval = -ENXIO;
-+		goto probe_err_out;
-+	}
-+	lp->tx_dma_regs = ioremap_nocache(bif->txdmabase,sizeof(struct DMA_Chan_s));
-+	
-+	if (!lp->tx_dma_regs) {
-+		ERR("Can't remap Tx DMA registers\n");
-+		retval = -ENXIO;
-+		goto probe_err_out;
-+	}
-+	
-+#ifdef RC32434_PROC_DEBUG
-+	lp->ps = create_proc_read_entry (bif->name, 0, proc_net,
-+					 rc32434_read_proc, dev);
-+#endif
-+	
-+	lp->td_ring =	(DMAD_t)kmalloc(TD_RING_SIZE + RD_RING_SIZE, GFP_KERNEL);
-+	if (!lp->td_ring) {
-+		ERR("Can't allocate descriptors\n");
-+		retval = -ENOMEM;
-+		goto probe_err_out;
-+	}
-+	
-+	dma_cache_inv((unsigned long)(lp->td_ring), TD_RING_SIZE + RD_RING_SIZE);
-+	
-+	/* now convert TD_RING pointer to KSEG1 */
-+	lp->td_ring = (DMAD_t )KSEG1ADDR(lp->td_ring);
-+	lp->rd_ring = &lp->td_ring[RC32434_NUM_TDS];
-+	
-+	
-+	spin_lock_init(&lp->lock);
-+	
-+	dev->base_addr = bif->iobase;
-+	/* just use the rx dma irq */
-+	dev->irq = bif->rx_dma_irq; 
-+	
-+	dev->priv = lp;
-+	
-+	dev->open = rc32434_open;
-+	dev->stop = rc32434_close;
-+	dev->hard_start_xmit = rc32434_send_packet;
-+	dev->get_stats	= rc32434_get_stats;
-+	dev->set_multicast_list = &rc32434_multicast_list;
-+	dev->tx_timeout = rc32434_tx_timeout;
-+	dev->watchdog_timeo = RC32434_TX_TIMEOUT;
-+
-+#ifdef CONFIG_IDT_USE_NAPI
-+	dev->poll = rc32434_poll;
-+	dev->weight = bif->weight;
-+	printk("Using NAPI with weight %d\n",dev->weight);
-+#else
-+	lp->rx_tasklet = kmalloc(sizeof(struct tasklet_struct), GFP_KERNEL);
-+	tasklet_init(lp->rx_tasklet, rc32434_rx_tasklet, (unsigned long)dev);
-+#endif
-+	lp->tx_tasklet = kmalloc(sizeof(struct tasklet_struct), GFP_KERNEL);
-+	tasklet_init(lp->tx_tasklet, rc32434_tx_tasklet, (unsigned long)dev);
-+	
-+	if ((err = register_netdev(dev))) {
-+		printk(KERN_ERR "rc32434 ethernet. Cannot register net device %d\n", err);
-+		free_netdev(dev);
-+		retval = -EINVAL;
-+		goto probe_err_out;
-+	}
-+	
-+	INFO("Rx IRQ %d, Tx IRQ %d, ", bif->rx_dma_irq, bif->tx_dma_irq);
-+	for (i = 0; i < 6; i++) {
-+		printk("%2.2x", dev->dev_addr[i]);
-+		if (i<5)
-+			printk(":");
-+	}
-+	printk("\n");
-+	
-+	return 0;
-+	
-+ probe_err_out:
-+	rc32434_cleanup_module();
-+	ERR(" failed.  Returns %d\n", retval);
-+	return retval;
-+	
-+}
-+
-+
-+static void rc32434_cleanup_module(void)
-+{
-+	int i;
-+	
-+	for (i = 0; rc32434_iflist[i].iobase; i++) {
-+		struct rc32434_if_t * bif = &rc32434_iflist[i];
-+		if (bif->dev != NULL) {
-+			struct rc32434_local *lp = (struct rc32434_local *)bif->dev->priv;
-+			if (lp != NULL) {
-+				if (lp->eth_regs)
-+					iounmap((void*)lp->eth_regs);
-+				if (lp->rx_dma_regs)
-+					iounmap((void*)lp->rx_dma_regs);
-+				if (lp->tx_dma_regs)
-+					iounmap((void*)lp->tx_dma_regs);
-+				if (lp->td_ring)
-+					kfree((void*)KSEG0ADDR(lp->td_ring));
-+				
-+#ifdef RC32434_PROC_DEBUG
-+				if (lp->ps) {
-+					remove_proc_entry(bif->name, proc_net);
-+				}
-+#endif
-+				kfree(lp);
-+			}
-+			
-+			unregister_netdev(bif->dev);
-+			free_netdev(bif->dev);
-+			kfree(bif->dev);
-+		}
-+	}
-+}
-+
-+
-+
-+static int rc32434_open(struct net_device *dev)
-+{
-+	struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-+	
-+	/* Initialize */
-+	if (rc32434_init(dev)) {
-+		ERR("Error: cannot open the Ethernet device\n");
-+		return -EAGAIN;
-+	}
-+	
-+	/* Install the interrupt handler that handles the Done Finished Ovr and Und Events */	
-+	if (request_irq(lp->rx_irq, &rc32434_rx_dma_interrupt,
-+		  SA_SHIRQ | SA_INTERRUPT,
-+			"rc32434 ethernet Rx", dev)) {
-+		ERR(": unable to get Rx DMA IRQ %d\n",
-+		    lp->rx_irq);
-+		return -EAGAIN;
-+	}
-+	if (request_irq(lp->tx_irq, &rc32434_tx_dma_interrupt,
-+		  SA_SHIRQ | SA_INTERRUPT,
-+			"rc32434 ethernet Tx", dev)) {
-+		ERR(": unable to get Tx DMA IRQ %d\n",
-+		    lp->tx_irq);
-+		free_irq(lp->rx_irq, dev);
-+		return -EAGAIN;
-+	}
-+	
-+#ifdef	RC32434_REVISION
-+	/* Install handler for overrun error. */
-+	if (request_irq(lp->ovr_irq, &rc32434_ovr_interrupt,
-+			SA_SHIRQ | SA_INTERRUPT,
-+			"Ethernet Overflow", dev)) {
-+		ERR(": unable to get OVR IRQ %d\n",
-+		    lp->ovr_irq);
-+		free_irq(lp->rx_irq, dev);
-+		free_irq(lp->tx_irq, dev);
-+		return -EAGAIN;
-+	}
-+#endif
-+	
-+	/* Install handler for underflow error. */
-+	if (request_irq(lp->und_irq, &rc32434_und_interrupt,
-+			SA_SHIRQ | SA_INTERRUPT,
-+			"Ethernet Underflow", dev)) {
-+		ERR(": unable to get UND IRQ %d\n",
-+		    lp->und_irq);
-+		free_irq(lp->rx_irq, dev);
-+		free_irq(lp->tx_irq, dev);
-+#ifdef	RC32434_REVISION		
-+		free_irq(lp->ovr_irq, dev);		
-+#endif
-+		return -EAGAIN;
-+	}
-+	
-+	
-+	return 0;
-+}
-+
-+
-+
-+
-+static int rc32434_close(struct net_device *dev)
-+{
-+	struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-+	u32 tmp;
-+	
-+	/* Disable interrupts */
-+	disable_irq(lp->rx_irq);
-+	disable_irq(lp->tx_irq);
-+#ifdef	RC32434_REVISION
-+	disable_irq(lp->ovr_irq);
-+#endif
-+	disable_irq(lp->und_irq);
-+	
-+	tmp = rc32434_readl(&lp->tx_dma_regs->dmasm);
-+	tmp = tmp | DMASM_f_m | DMASM_e_m;
-+	rc32434_writel(tmp, &lp->tx_dma_regs->dmasm);
-+	
-+	tmp = rc32434_readl(&lp->rx_dma_regs->dmasm);
-+	tmp = tmp | DMASM_d_m | DMASM_h_m | DMASM_e_m;
-+	rc32434_writel(tmp, &lp->rx_dma_regs->dmasm);
-+	
-+	free_irq(lp->rx_irq, dev);
-+	free_irq(lp->tx_irq, dev);
-+#ifdef	RC32434_REVISION	
-+	free_irq(lp->ovr_irq, dev);
-+#endif
-+	free_irq(lp->und_irq, dev);
-+	return 0;
-+}
-+
-+
-+/* transmit packet */
-+static int rc32434_send_packet(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct rc32434_local		*lp = (struct rc32434_local *)dev->priv;
-+	unsigned long 			flags;
-+	u32					length;
-+	DMAD_t				td;
-+	
-+	
-+	spin_lock_irqsave(&lp->lock, flags);
-+	
-+	td = &lp->td_ring[lp->tx_chain_tail];
-+	
-+	/* stop queue when full, drop pkts if queue already full */
-+	if(lp->tx_count >= (RC32434_NUM_TDS - 2)) {
-+		lp->tx_full = 1;
-+		
-+		if(lp->tx_count == (RC32434_NUM_TDS - 2)) {
-+			netif_stop_queue(dev);
-+		}
-+		else {
-+			lp->stats.tx_dropped++;
-+			dev_kfree_skb_any(skb);
-+			spin_unlock_irqrestore(&lp->lock, flags);
-+			return 1;
-+		}	   
-+	}	 
-+	
-+	lp->tx_count ++;
-+	
-+	lp->tx_skb[lp->tx_chain_tail] = skb;
-+	
-+	length = skb->len;
-+	
-+	/* Setup the transmit descriptor. */
-+	td->ca = CPHYSADDR(skb->data);
-+	
-+	if(rc32434_readl(&(lp->tx_dma_regs->dmandptr)) == 0) {
-+		if( lp->tx_chain_status == empty ) {
-+			td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m;                                /*  Update tail      */
-+			lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK;                          /*   Move tail       */
-+			rc32434_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); /* Write to NDPTR    */
-+			lp->tx_chain_head = lp->tx_chain_tail;                                                  /* Move head to tail */
-+		}
-+		else {
-+			td->control = DMA_COUNT(length) |DMAD_cof_m|DMAD_iof_m;                                 /* Update tail */
-+			lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].control &=  ~(DMAD_cof_m);          /* Link to prev */
-+			lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].link =  CPHYSADDR(td);              /* Link to prev */
-+			lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK;                          /* Move tail */
-+			rc32434_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); /* Write to NDPTR */
-+			lp->tx_chain_head = lp->tx_chain_tail;                                                  /* Move head to tail */
-+			lp->tx_chain_status = empty;
-+		}
-+	}
-+	else {
-+		if( lp->tx_chain_status == empty ) {
-+			td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m;                                /* Update tail */
-+			lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK;                          /* Move tail */
-+			lp->tx_chain_status = filled;
-+		}
-+		else {
-+			td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m;                                /* Update tail */
-+			lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].control &=  ~(DMAD_cof_m);          /* Link to prev */
-+			lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].link =  CPHYSADDR(td);              /* Link to prev */
-+			lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK;                          /* Move tail */
-+		}
-+	}
-+	
-+	dev->trans_start = jiffies;				
-+	
-+	spin_unlock_irqrestore(&lp->lock, flags);
-+	
-+	return 0;
-+}
-+
-+
-+/* Ethernet MII-PHY Handler */
-+static void rc32434_mii_handler(unsigned long data)
-+{
-+	struct net_device *dev = (struct net_device *)data;		
-+	struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-+	unsigned long 	flags;
-+	unsigned long duplex_status;
-+	int port_addr = (lp->rx_irq == 0x2c? 1:0) << 8;
-+	
-+	spin_lock_irqsave(&lp->lock, flags);
-+	
-+	/* Two ports are using the same MII, the difference is the PHY address */
-+	rc32434_writel(0, &rc32434_eth0_regs->miimcfg);  
-+	rc32434_writel(0, &rc32434_eth0_regs->miimcmd);  
-+	rc32434_writel(port_addr |0x05, &rc32434_eth0_regs->miimaddr);  
-+	rc32434_writel(MIIMCMD_scn_m, &rc32434_eth0_regs->miimcmd);  
-+	while(rc32434_readl(&rc32434_eth0_regs->miimind) & MIIMIND_nv_m);
-+	
-+	ERR("irq:%x		port_addr:%x	RDD:%x\n", 
-+	    lp->rx_irq, port_addr, rc32434_readl(&rc32434_eth0_regs->miimrdd));
-+	duplex_status = (rc32434_readl(&rc32434_eth0_regs->miimrdd) & 0x140)? ETHMAC2_fd_m: 0;
-+	if(duplex_status != lp->duplex_mode) {
-+		ERR("The MII-PHY is Auto-negotiated to %s-Duplex mode for Eth-%x\n", duplex_status? "Full":"Half", lp->rx_irq == 0x2c? 1:0);		
-+		lp->duplex_mode = duplex_status;
-+		rc32434_restart(dev);		
-+	}
-+	
-+	lp->mii_phy_timer.expires = jiffies + 10 * HZ;	
-+	add_timer(&lp->mii_phy_timer);
-+	
-+	spin_unlock_irqrestore(&lp->lock, flags);
-+	
-+}
-+
-+#ifdef	RC32434_REVISION	
-+/* Ethernet Rx Overflow interrupt */
-+static irqreturn_t
-+rc32434_ovr_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-+{
-+	struct net_device *dev = (struct net_device *)dev_id;
-+	struct rc32434_local *lp;
-+	unsigned int ovr;
-+	irqreturn_t retval = IRQ_NONE;
-+	
-+	ASSERT(dev != NULL);
-+	
-+	lp = (struct rc32434_local *)dev->priv;
-+	spin_lock(&lp->lock);
-+	ovr = rc32434_readl(&lp->eth_regs->ethintfc);
-+	
-+	if(ovr & ETHINTFC_ovr_m) {
-+		netif_stop_queue(dev);
-+		
-+		/* clear OVR bit */
-+		rc32434_writel((ovr & ~ETHINTFC_ovr_m), &lp->eth_regs->ethintfc);
-+		
-+		/* Restart interface */
-+		rc32434_restart(dev);
-+		retval = IRQ_HANDLED;
-+	}
-+	spin_unlock(&lp->lock);
-+	
-+	return retval;
-+}
-+
-+#endif
-+
-+
-+/* Ethernet Tx Underflow interrupt */
-+static irqreturn_t
-+rc32434_und_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-+{
-+	struct net_device *dev = (struct net_device *)dev_id;
-+	struct rc32434_local *lp;
-+	unsigned int und;
-+	irqreturn_t retval = IRQ_NONE;
-+	
-+	ASSERT(dev != NULL);
-+	
-+	lp = (struct rc32434_local *)dev->priv;
-+	
-+	spin_lock(&lp->lock);
-+	
-+	und = rc32434_readl(&lp->eth_regs->ethintfc);
-+	
-+	if(und & ETHINTFC_und_m) {
-+		netif_stop_queue(dev);
-+		
-+		rc32434_writel((und & ~ETHINTFC_und_m), &lp->eth_regs->ethintfc);
-+		
-+		/* Restart interface */
-+		rc32434_restart(dev);
-+		retval = IRQ_HANDLED;
-+	}
-+	
-+	spin_unlock(&lp->lock);
-+	
-+	return retval;
-+}
-+
-+
-+/* Ethernet Rx DMA interrupt */
-+static irqreturn_t
-+rc32434_rx_dma_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-+{
-+	struct net_device *dev = (struct net_device *)dev_id;
-+	struct rc32434_local* lp;
-+	volatile u32 dmas,dmasm;
-+	irqreturn_t retval;
-+	
-+	ASSERT(dev != NULL);
-+	
-+	lp = (struct rc32434_local *)dev->priv;
-+	
-+	spin_lock(&lp->lock);
-+	dmas = rc32434_readl(&lp->rx_dma_regs->dmas);
-+	if(dmas & (DMAS_d_m|DMAS_h_m|DMAS_e_m)) {
-+		/* Mask D H E bit in Rx DMA */
-+		dmasm = rc32434_readl(&lp->rx_dma_regs->dmasm);
-+		rc32434_writel(dmasm | (DMASM_d_m | DMASM_h_m | DMASM_e_m), &lp->rx_dma_regs->dmasm);
-+#ifdef CONFIG_IDT_USE_NAPI
-+		if(netif_rx_schedule_prep(dev))
-+                        __netif_rx_schedule(dev);
-+#else
-+		tasklet_hi_schedule(lp->rx_tasklet);
-+#endif
-+		
-+		if (dmas & DMAS_e_m)
-+			ERR(": DMA error\n");
-+		
-+		retval = IRQ_HANDLED;
-+	}
-+	else
-+		retval = IRQ_NONE;
-+	
-+	spin_unlock(&lp->lock);
-+	return retval;
-+}
-+
-+#ifdef CONFIG_IDT_USE_NAPI
-+static int rc32434_poll(struct net_device *rx_data_dev, int *budget)
-+#else
-+static void rc32434_rx_tasklet(unsigned long rx_data_dev)
-+#endif
-+{
-+	struct net_device *dev = (struct net_device *)rx_data_dev;	
-+	struct rc32434_local* lp = netdev_priv(dev);
-+	volatile DMAD_t  rd = &lp->rd_ring[lp->rx_next_done];
-+	struct sk_buff *skb, *skb_new;
-+	u8* pkt_buf;
-+	u32 devcs, count, pkt_len, pktuncrc_len;
-+	volatile u32 dmas;
-+#ifdef CONFIG_IDT_USE_NAPI
-+	u32 received = 0;
-+	int rx_work_limit = min(*budget,dev->quota);
-+#else
-+	unsigned long 	flags;
-+	spin_lock_irqsave(&lp->lock, flags);
-+#endif
-+	
-+	while ( (count = RC32434_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
-+#ifdef CONFIG_IDT_USE_NAPI
-+		if(--rx_work_limit <0)
-+                {
-+                        break;
-+                }
-+#endif
-+		/* init the var. used for the later operations within the while loop */
-+		skb_new = NULL;
-+		devcs = rd->devcs;
-+		pkt_len = RCVPKT_LENGTH(devcs);
-+		skb = lp->rx_skb[lp->rx_next_done];
-+      
-+		if (count < 64) {
-+			lp->stats.rx_errors++;
-+			lp->stats.rx_dropped++;			
-+		}
-+		else if ((devcs & ( ETHRX_ld_m)) !=	ETHRX_ld_m) {
-+			/* check that this is a whole packet */
-+			/* WARNING: DMA_FD bit incorrectly set in Rc32434 (errata ref #077) */
-+			lp->stats.rx_errors++;
-+			lp->stats.rx_dropped++;
-+		}
-+		else if ( (devcs & ETHRX_rok_m)  ) {
-+			
-+			{
-+				/* must be the (first and) last descriptor then */
-+				pkt_buf = (u8*)lp->rx_skb[lp->rx_next_done]->data;
-+				
-+				pktuncrc_len = pkt_len - 4;
-+				/* invalidate the cache */
-+				dma_cache_inv((unsigned long)pkt_buf, pktuncrc_len);
-+				
-+				/* Malloc up new buffer. */					  
-+				skb_new = dev_alloc_skb(RC32434_RBSIZE + 2);					             	
-+				
-+				if (skb_new != NULL){
-+					/* Make room */
-+					skb_put(skb, pktuncrc_len);		    
-+					
-+					skb->protocol = eth_type_trans(skb, dev);
-+					
-+					/* pass the packet to upper layers */
-+#ifdef CONFIG_IDT_USE_NAPI
-+					netif_receive_skb(skb);
-+#else
-+					netif_rx(skb);
-+#endif
-+					
-+					dev->last_rx = jiffies;
-+					lp->stats.rx_packets++;
-+					lp->stats.rx_bytes += pktuncrc_len;
-+					
-+					if (IS_RCV_MP(devcs))
-+						lp->stats.multicast++;
-+					
-+					/* 16 bit align */						  
-+					skb_reserve(skb_new, 2);	
-+					
-+					skb_new->dev = dev;
-+					lp->rx_skb[lp->rx_next_done] = skb_new;
-+				}
-+				else {
-+					ERR("no memory, dropping rx packet.\n");
-+					lp->stats.rx_errors++;		
-+					lp->stats.rx_dropped++;					
-+				}
-+			}
-+			
-+		}			
-+		else {
-+			/* This should only happen if we enable accepting broken packets */
-+			lp->stats.rx_errors++;
-+			lp->stats.rx_dropped++;
-+			
-+			/* add statistics counters */
-+			if (IS_RCV_CRC_ERR(devcs)) {
-+				DBG(2, "RX CRC error\n");
-+				lp->stats.rx_crc_errors++;
-+			} 
-+			else if (IS_RCV_LOR_ERR(devcs)) {
-+				DBG(2, "RX LOR error\n");
-+				lp->stats.rx_length_errors++;
-+			}				
-+			else if (IS_RCV_LE_ERR(devcs)) {
-+				DBG(2, "RX LE error\n");
-+				lp->stats.rx_length_errors++;
-+			}
-+			else if (IS_RCV_OVR_ERR(devcs)) {
-+				lp->stats.rx_over_errors++;
-+			}
-+			else if (IS_RCV_CV_ERR(devcs)) {
-+				/* code violation */
-+				DBG(2, "RX CV error\n");
-+				lp->stats.rx_frame_errors++;
-+			}
-+			else if (IS_RCV_CES_ERR(devcs)) {
-+				DBG(2, "RX Preamble error\n");
-+			}
-+		}
-+		
-+		rd->devcs = 0;
-+		
-+		/* restore descriptor's curr_addr */
-+		if(skb_new)
-+			rd->ca = CPHYSADDR(skb_new->data); 
-+		else
-+			rd->ca = CPHYSADDR(skb->data);
-+		
-+		rd->control = DMA_COUNT(RC32434_RBSIZE) |DMAD_cod_m |DMAD_iod_m;
-+		lp->rd_ring[(lp->rx_next_done-1)& RC32434_RDS_MASK].control &=  ~(DMAD_cod_m); 	
-+		
-+		lp->rx_next_done = (lp->rx_next_done + 1) & RC32434_RDS_MASK;
-+		rd = &lp->rd_ring[lp->rx_next_done];
-+		rc32434_writel( ~DMAS_d_m, &lp->rx_dma_regs->dmas);
-+	}	
-+#ifdef CONFIG_IDT_USE_NAPI
-+        dev->quota -= received;
-+        *budget =- received;
-+        if(rx_work_limit < 0)
-+                goto not_done;
-+#endif
-+	
-+	dmas = rc32434_readl(&lp->rx_dma_regs->dmas);
-+	
-+	if(dmas & DMAS_h_m) {
-+		rc32434_writel( ~(DMAS_h_m | DMAS_e_m), &lp->rx_dma_regs->dmas);
-+#ifdef RC32434_PROC_DEBUG
-+		lp->dma_halt_cnt++;
-+#endif
-+		rd->devcs = 0;
-+		skb = lp->rx_skb[lp->rx_next_done];
-+		rd->ca = CPHYSADDR(skb->data);
-+		rc32434_chain_rx(lp,rd);
-+	}
-+	
-+#ifdef CONFIG_IDT_USE_NAPI
-+	netif_rx_complete(dev);
-+#endif
-+	/* Enable D H E bit in Rx DMA */
-+	rc32434_writel(rc32434_readl(&lp->rx_dma_regs->dmasm) & ~(DMASM_d_m | DMASM_h_m |DMASM_e_m), &lp->rx_dma_regs->dmasm); 
-+#ifdef CONFIG_IDT_USE_NAPI
-+	return 0;
-+ not_done:
-+	return 1;
-+#else
-+	spin_unlock_irqrestore(&lp->lock, flags);
-+	return;
-+#endif
-+
-+	
-+}	
-+
-+
-+
-+/* Ethernet Tx DMA interrupt */
-+static irqreturn_t
-+rc32434_tx_dma_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-+{
-+	struct net_device *dev = (struct net_device *)dev_id;
-+	struct rc32434_local *lp;
-+	volatile u32 dmas,dmasm;
-+	irqreturn_t retval;
-+	
-+	ASSERT(dev != NULL);
-+	
-+	lp = (struct rc32434_local *)dev->priv;
-+	
-+	spin_lock(&lp->lock);
-+	
-+	dmas = rc32434_readl(&lp->tx_dma_regs->dmas);
-+	
-+	if (dmas & (DMAS_f_m | DMAS_e_m)) {
-+		dmasm = rc32434_readl(&lp->tx_dma_regs->dmasm);
-+		/* Mask F E bit in Tx DMA */
-+		rc32434_writel(dmasm | (DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm);
-+		
-+		tasklet_hi_schedule(lp->tx_tasklet);
-+		
-+		if(lp->tx_chain_status == filled && (rc32434_readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
-+			rc32434_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr));			
-+			lp->tx_chain_status = empty;
-+			lp->tx_chain_head = lp->tx_chain_tail;
-+			dev->trans_start = jiffies;
-+		}
-+		
-+		if (dmas & DMAS_e_m)
-+			ERR(": DMA error\n");
-+		
-+		retval = IRQ_HANDLED;
-+	}
-+	else
-+		retval = IRQ_NONE;
-+	
-+	spin_unlock(&lp->lock);
-+	
-+	return retval;
-+}
-+
-+
-+static void rc32434_tx_tasklet(unsigned long tx_data_dev)
-+{
-+	struct net_device *dev = (struct net_device *)tx_data_dev;	
-+	struct rc32434_local* lp = (struct rc32434_local *)dev->priv;
-+	volatile DMAD_t td = &lp->td_ring[lp->tx_next_done];
-+	u32 devcs;
-+	unsigned long 	flags;
-+	volatile u32 dmas;
-+	
-+	spin_lock_irqsave(&lp->lock, flags);
-+	
-+	/* process all desc that are done */
-+	while(IS_DMA_FINISHED(td->control)) {
-+		if(lp->tx_full == 1) {
-+			netif_wake_queue(dev);
-+			lp->tx_full = 0;
-+		}
-+		
-+		devcs = lp->td_ring[lp->tx_next_done].devcs;    
-+		if ((devcs & (ETHTX_fd_m | ETHTX_ld_m)) != (ETHTX_fd_m | ETHTX_ld_m)) {
-+			lp->stats.tx_errors++;
-+			lp->stats.tx_dropped++;				
-+			
-+			/* should never happen */
-+			DBG(1, __FUNCTION__ ": split tx ignored\n");
-+		}
-+		else if (IS_TX_TOK(devcs)) {
-+			lp->stats.tx_packets++;
-+		}
-+		else {
-+			lp->stats.tx_errors++;
-+			lp->stats.tx_dropped++;				
-+			
-+			/* underflow */
-+			if (IS_TX_UND_ERR(devcs)) 
-+				lp->stats.tx_fifo_errors++;
-+			
-+			/* oversized frame */
-+			if (IS_TX_OF_ERR(devcs))
-+				lp->stats.tx_aborted_errors++;
-+			
-+			/* excessive deferrals */
-+			if (IS_TX_ED_ERR(devcs))
-+				lp->stats.tx_carrier_errors++;
-+			
-+			/* collisions: medium busy */
-+			if (IS_TX_EC_ERR(devcs))
-+				lp->stats.collisions++;
-+			
-+			/* late collision */
-+			if (IS_TX_LC_ERR(devcs))
-+				lp->stats.tx_window_errors++;
-+			
-+		}
-+		
-+		/* We must always free the original skb */
-+		if (lp->tx_skb[lp->tx_next_done] != NULL) {
-+			dev_kfree_skb_any(lp->tx_skb[lp->tx_next_done]);
-+			lp->tx_skb[lp->tx_next_done] = NULL;
-+		}
-+		
-+		lp->td_ring[lp->tx_next_done].control = DMAD_iof_m;
-+		lp->td_ring[lp->tx_next_done].devcs = ETHTX_fd_m | ETHTX_ld_m;	
-+		lp->td_ring[lp->tx_next_done].link = 0;
-+		lp->td_ring[lp->tx_next_done].ca = 0;
-+		lp->tx_count --;
-+		
-+		/* go on to next transmission */
-+		lp->tx_next_done = (lp->tx_next_done + 1) & RC32434_TDS_MASK;
-+		td = &lp->td_ring[lp->tx_next_done];
-+		
-+	}
-+	
-+	dmas = rc32434_readl(&lp->tx_dma_regs->dmas);
-+	rc32434_writel( ~dmas, &lp->tx_dma_regs->dmas);
-+	
-+	/* Enable F E bit in Tx DMA */
-+	rc32434_writel(rc32434_readl(&lp->tx_dma_regs->dmasm) & ~(DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm); 
-+	spin_unlock_irqrestore(&lp->lock, flags);
-+	
-+}
-+
-+
-+static struct net_device_stats * rc32434_get_stats(struct net_device *dev)
-+{
-+	struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-+	return &lp->stats;
-+}
-+
-+
-+/*
-+ * Set or clear the multicast filter for this adaptor.
-+ */
-+static void rc32434_multicast_list(struct net_device *dev)
-+{   
-+	/* listen to broadcasts always and to treat 	*/
-+	/*       IFF bits independantly	*/
-+	struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-+	unsigned long flags;
-+	u32 recognise = ETHARC_ab_m; 		/* always accept broadcasts */
-+	
-+	if (dev->flags & IFF_PROMISC)         		/* set promiscuous mode */
-+		recognise |= ETHARC_pro_m;
-+	
-+	if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15))
-+		recognise |= ETHARC_am_m;    	  	/* all multicast & bcast */
-+	else if (dev->mc_count > 0) {
-+		DBG(2, __FUNCTION__ ": mc_count %d\n", dev->mc_count);
-+		recognise |= ETHARC_am_m;    	  	/* for the time being */
-+	}
-+	
-+	spin_lock_irqsave(&lp->lock, flags);
-+	rc32434_writel(recognise, &lp->eth_regs->etharc);
-+	spin_unlock_irqrestore(&lp->lock, flags);
-+}
-+
-+
-+static void rc32434_tx_timeout(struct net_device *dev)
-+{
-+	struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-+	unsigned long flags;
-+	
-+	spin_lock_irqsave(&lp->lock, flags);
-+	rc32434_restart(dev);
-+	spin_unlock_irqrestore(&lp->lock, flags);
-+	
-+}
-+
-+
-+/*
-+ * Initialize the RC32434 ethernet controller.
-+ */
-+static int rc32434_init(struct net_device *dev)
-+{
-+	struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-+	int i, j;
-+	
-+	/* Disable DMA */       
-+	rc32434_abort_tx(dev);
-+	rc32434_abort_rx(dev); 
-+	
-+	/* reset ethernet logic */ 
-+	rc32434_writel(0, &lp->eth_regs->ethintfc);
-+	while((rc32434_readl(&lp->eth_regs->ethintfc) & ETHINTFC_rip_m))
-+		dev->trans_start = jiffies;	
-+	
-+	/* Enable Ethernet Interface */ 
-+	rc32434_writel(ETHINTFC_en_m, &lp->eth_regs->ethintfc); 
-+	
-+#ifndef CONFIG_IDT_USE_NAPI
-+	tasklet_disable(lp->rx_tasklet);
-+#endif
-+	tasklet_disable(lp->tx_tasklet);
-+	
-+	/* Initialize the transmit Descriptors */
-+	for (i = 0; i < RC32434_NUM_TDS; i++) {
-+		lp->td_ring[i].control = DMAD_iof_m;
-+		lp->td_ring[i].devcs = ETHTX_fd_m | ETHTX_ld_m;
-+		lp->td_ring[i].ca = 0;
-+		lp->td_ring[i].link = 0;
-+		if (lp->tx_skb[i] != NULL) {
-+			dev_kfree_skb_any(lp->tx_skb[i]);
-+			lp->tx_skb[i] = NULL;
-+		}
-+	}
-+	lp->tx_next_done = lp->tx_chain_head = lp->tx_chain_tail = 	lp->tx_full = lp->tx_count = 0;
-+	lp->	tx_chain_status = empty;
-+	
-+	/*
-+	 * Initialize the receive descriptors so that they
-+	 * become a circular linked list, ie. let the last
-+	 * descriptor point to the first again.
-+	 */
-+	for (i=0; i<RC32434_NUM_RDS; i++) {
-+		struct sk_buff *skb = lp->rx_skb[i];
-+		
-+		if (lp->rx_skb[i] == NULL) {
-+			skb = dev_alloc_skb(RC32434_RBSIZE + 2);
-+			if (skb == NULL) {
-+				ERR("No memory in the system\n");
-+				for (j = 0; j < RC32434_NUM_RDS; j ++)
-+					if (lp->rx_skb[j] != NULL) 
-+						dev_kfree_skb_any(lp->rx_skb[j]);
-+				
-+				return 1;
-+			}
-+			else {
-+				skb->dev = dev;
-+				skb_reserve(skb, 2);
-+				lp->rx_skb[i] = skb;
-+				lp->rd_ring[i].ca = CPHYSADDR(skb->data); 
-+				
-+			}
-+		}
-+		lp->rd_ring[i].control =	DMAD_iod_m | DMA_COUNT(RC32434_RBSIZE);
-+		lp->rd_ring[i].devcs = 0;
-+		lp->rd_ring[i].ca = CPHYSADDR(skb->data);
-+		lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
-+		
-+	}
-+	/* loop back */
-+	lp->rd_ring[RC32434_NUM_RDS-1].link = CPHYSADDR(&lp->rd_ring[0]);
-+	lp->rx_next_done   = 0;
-+	
-+	lp->rd_ring[RC32434_NUM_RDS-1].control |= DMAD_cod_m;
-+	lp->rx_chain_head = 0;
-+	lp->rx_chain_tail = 0;
-+	lp->rx_chain_status = empty;
-+	
-+	rc32434_writel(0, &lp->rx_dma_regs->dmas);
-+	/* Start Rx DMA */
-+	rc32434_start_rx(lp, &lp->rd_ring[0]);
-+	
-+	/* Enable F E bit in Tx DMA */
-+	rc32434_writel(rc32434_readl(&lp->tx_dma_regs->dmasm) & ~(DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm); 
-+	/* Enable D H E bit in Rx DMA */
-+	rc32434_writel(rc32434_readl(&lp->rx_dma_regs->dmasm) & ~(DMASM_d_m | DMASM_h_m | DMASM_e_m), &lp->rx_dma_regs->dmasm); 
-+	
-+	/* Accept only packets destined for this Ethernet device address */
-+	rc32434_writel(ETHARC_ab_m, &lp->eth_regs->etharc); 
-+	
-+	/* Set all Ether station address registers to their initial values */ 
-+	rc32434_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal0); 
-+	rc32434_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah0);
-+	
-+	rc32434_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal1); 
-+	rc32434_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah1);
-+	
-+	rc32434_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal2); 
-+	rc32434_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah2);
-+	
-+	rc32434_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal3); 
-+	rc32434_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah3); 
-+	
-+	
-+	/* Frame Length Checking, Pad Enable, CRC Enable, Full Duplex set */ 
-+	rc32434_writel(ETHMAC2_pe_m | ETHMAC2_cen_m | ETHMAC2_fd_m, &lp->eth_regs->ethmac2);  
-+	//ETHMAC2_flc_m		ETHMAC2_fd_m	lp->duplex_mode
-+	
-+	/* Back to back inter-packet-gap */ 
-+	rc32434_writel(0x15, &lp->eth_regs->ethipgt); 
-+	/* Non - Back to back inter-packet-gap */ 
-+	rc32434_writel(0x12, &lp->eth_regs->ethipgr); 
-+	
-+	/* Management Clock Prescaler Divisor */
-+	/* Clock independent setting */
-+	rc32434_writel(((idt_cpu_freq)/MII_CLOCK+1) & ~1,
-+		       &lp->eth_regs->ethmcp);
-+	
-+	/* don't transmit until fifo contains 48b */
-+	rc32434_writel(48, &lp->eth_regs->ethfifott);
-+	
-+	rc32434_writel(ETHMAC1_re_m, &lp->eth_regs->ethmac1);
-+	
-+#ifndef CONFIG_IDT_USE_NAPI
-+	tasklet_enable(lp->rx_tasklet);
-+#endif
-+	tasklet_enable(lp->tx_tasklet);
-+	
-+	netif_start_queue(dev);
-+	
-+	
-+	return 0; 
-+	
-+}
-+
-+
-+#ifndef MODULE
-+
-+static int __init rc32434_setup(char *options)
-+{
-+	/* no options yet */
-+	return 1;
-+}
-+
-+static int __init rc32434_setup_ethaddr0(char *options)
-+{
-+	memcpy(mac0, options, 17);
-+	mac0[17]= '\0';
-+	return 1;
-+}
-+
-+__setup("rc32434eth=", rc32434_setup);
-+__setup("ethaddr0=", rc32434_setup_ethaddr0);
-+
-+
-+#endif /* MODULE */
-+
-+module_init(rc32434_init_module);
-+module_exit(rc32434_cleanup_module);
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-diff -Nur linux-2.6.16/drivers/net/rc32434_eth.h linux-2.6.16-owrt/drivers/net/rc32434_eth.h
---- linux-2.6.16/drivers/net/rc32434_eth.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/drivers/net/rc32434_eth.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,187 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     Definitions for IDT RC32434 on-chip ethernet controller.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * Aug 2004
-+ *
-+ * Added NAPI
-+ *
-+ **************************************************************************
-+ */
-+
-+
-+#include  <asm/idt-boards/rc32434/rc32434.h>
-+#include  <asm/idt-boards/rc32434/rc32434_dma_v.h>
-+#include  <asm/idt-boards/rc32434/rc32434_eth_v.h>
-+
-+#define RC32434_DEBUG	2
-+//#define RC32434_PROC_DEBUG
-+#undef	RC32434_DEBUG
-+
-+#ifdef RC32434_DEBUG
-+
-+/* use 0 for production, 1 for verification, >2 for debug */
-+static int rc32434_debug = RC32434_DEBUG;
-+#define ASSERT(expr) \
-+	if(!(expr)) {	\
-+		printk( "Assertion failed! %s,%s,%s,line=%d\n",	\
-+		#expr,__FILE__,__FUNCTION__,__LINE__);		}
-+#define DBG(lvl, format, arg...) if (rc32434_debug > lvl) printk(KERN_INFO "%s: " format, dev->name , ## arg)
-+#else
-+#define ASSERT(expr) do {} while (0)
-+#define DBG(lvl, format, arg...) do {} while (0)
-+#endif
-+
-+#define INFO(format, arg...) printk(KERN_INFO "%s: " format, dev->name , ## arg)
-+#define ERR(format, arg...) printk(KERN_ERR "%s: " format, dev->name , ## arg)
-+#define WARN(format, arg...) printk(KERN_WARNING "%s: " format, dev->name , ## arg)		
-+
-+#define ETH0_DMA_RX_IRQ   	GROUP1_IRQ_BASE + 0
-+#define ETH0_DMA_TX_IRQ   	GROUP1_IRQ_BASE + 1 
-+#define ETH0_RX_OVR_IRQ   	GROUP3_IRQ_BASE + 9
-+#define ETH0_TX_UND_IRQ   	GROUP3_IRQ_BASE + 10
-+
-+#define ETH0_RX_DMA_ADDR  (DMA0_PhysicalAddress + 0*DMA_CHAN_OFFSET)
-+#define ETH0_TX_DMA_ADDR  (DMA0_PhysicalAddress + 1*DMA_CHAN_OFFSET)
-+
-+/* the following must be powers of two */
-+#ifdef CONFIG_IDT_USE_NAPI
-+#define RC32434_NUM_RDS    64    		/* number of receive descriptors */
-+#define RC32434_NUM_TDS    64    		/* number of transmit descriptors */
-+#else
-+#define RC32434_NUM_RDS    128    		/* number of receive descriptors */
-+#define RC32434_NUM_TDS    128    		/* number of transmit descriptors */
-+#endif
-+
-+#define RC32434_RBSIZE     1536  		/* size of one resource buffer = Ether MTU */
-+#define RC32434_RDS_MASK   (RC32434_NUM_RDS-1)
-+#define RC32434_TDS_MASK   (RC32434_NUM_TDS-1)
-+#define RD_RING_SIZE (RC32434_NUM_RDS * sizeof(struct DMAD_s))
-+#define TD_RING_SIZE (RC32434_NUM_TDS * sizeof(struct DMAD_s))
-+
-+#define RC32434_TX_TIMEOUT HZ * 100
-+
-+#define rc32434_eth0_regs ((ETH_t)(ETH0_VirtualAddress))
-+#define rc32434_eth1_regs ((ETH_t)(ETH1_VirtualAddress))
-+
-+enum status	{ filled,	empty};
-+#define IS_DMA_FINISHED(X)   (((X) & (DMAD_f_m)) != 0)
-+#define IS_DMA_DONE(X)   (((X) & (DMAD_d_m)) != 0)
-+
-+
-+/* Information that need to be kept for each board. */
-+struct rc32434_local {
-+	ETH_t  eth_regs;
-+	DMA_Chan_t  rx_dma_regs;
-+	DMA_Chan_t  tx_dma_regs;
-+	volatile DMAD_t   td_ring;			/* transmit descriptor ring */ 
-+	volatile DMAD_t   rd_ring;			/* receive descriptor ring  */
-+	
-+	struct sk_buff* tx_skb[RC32434_NUM_TDS]; 	/* skbuffs for pkt to trans */
-+	struct sk_buff* rx_skb[RC32434_NUM_RDS]; 	/* skbuffs for pkt to trans */
-+	
-+#ifndef CONFIG_IDT_USE_NAPI
-+	struct tasklet_struct * rx_tasklet;
-+#endif
-+	struct tasklet_struct * tx_tasklet;
-+	
-+	int	rx_next_done;
-+	int	rx_chain_head;
-+	int	rx_chain_tail;
-+	enum status	rx_chain_status;
-+	
-+	int	tx_next_done;
-+	int	tx_chain_head;
-+	int	tx_chain_tail;
-+	enum status	tx_chain_status;
-+	int tx_count;			
-+	int	tx_full;
-+	
-+	struct timer_list    mii_phy_timer;
-+	unsigned long duplex_mode;
-+	
-+	int   	rx_irq;
-+	int    tx_irq;
-+	int    ovr_irq;
-+	int    und_irq;
-+	
-+	struct net_device_stats stats;
-+	spinlock_t lock; 
-+	
-+	/* debug /proc entry */
-+	struct proc_dir_entry *ps;
-+	int dma_halt_cnt;  int dma_run_cnt;
-+};
-+
-+extern unsigned int idt_cpu_freq;
-+
-+/* Index to functions, as function prototypes. */
-+static int rc32434_open(struct net_device *dev);
-+static int rc32434_send_packet(struct sk_buff *skb, struct net_device *dev);
-+static void rc32434_mii_handler(unsigned long data);
-+static irqreturn_t  rc32434_und_interrupt(int irq, void *dev_id, struct pt_regs * regs);
-+static irqreturn_t rc32434_rx_dma_interrupt(int irq, void *dev_id, struct pt_regs * regs);
-+static irqreturn_t rc32434_tx_dma_interrupt(int irq, void *dev_id, struct pt_regs * regs);
-+#ifdef	RC32434_REVISION	
-+static irqreturn_t rc32434_ovr_interrupt(int irq, void *dev_id, struct pt_regs * regs);
-+#endif
-+static int  rc32434_close(struct net_device *dev);
-+static struct net_device_stats *rc32434_get_stats(struct net_device *dev);
-+static void rc32434_multicast_list(struct net_device *dev);
-+static int  rc32434_init(struct net_device *dev);
-+static void rc32434_tx_timeout(struct net_device *dev);
-+
-+static void rc32434_tx_tasklet(unsigned long tx_data_dev);
-+#ifdef CONFIG_IDT_USE_NAPI
-+static int rc32434_poll(struct net_device *rx_data_dev, int *budget);
-+#else
-+static void rc32434_rx_tasklet(unsigned long rx_data_dev);
-+#endif
-+static void rc32434_cleanup_module(void);
-+static int rc32434_probe(int port_num);
-+int rc32434_init_module(void);
-+
-+
-+static inline void rc32434_abort_dma(struct net_device *dev, DMA_Chan_t ch)
-+{
-+	if (rc32434_readl(&ch->dmac) & DMAC_run_m) {
-+		rc32434_writel(0x10, &ch->dmac); 
-+		
-+		while (!(rc32434_readl(&ch->dmas) & DMAS_h_m))
-+			dev->trans_start = jiffies;		
-+		
-+		rc32434_writel(0, &ch->dmas);  
-+	}
-+	
-+	rc32434_writel(0, &ch->dmadptr); 
-+	rc32434_writel(0, &ch->dmandptr); 
-+}
-diff -Nur linux-2.6.16/include/asm-mips/bootinfo.h linux-2.6.16-owrt/include/asm-mips/bootinfo.h
---- linux-2.6.16/include/asm-mips/bootinfo.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/bootinfo.h	2006-03-20 14:25:10.000000000 +0100
-@@ -218,6 +218,17 @@
- #define MACH_GROUP_TITAN       22	/* PMC-Sierra Titan		*/
- #define  MACH_TITAN_YOSEMITE	1	/* PMC-Sierra Yosemite		*/
- 
-+
-+/*
-+ * Valid machtype for group ARUBA
-+ */
-+#define MACH_GROUP_ARUBA	23
-+#define  MACH_ARUBA_UNKNOWN	0
-+#define  MACH_ARUBA_AP60	1
-+#define  MACH_ARUBA_AP65	2
-+#define  MACH_ARUBA_AP70	3
-+#define  MACH_ARUBA_AP40	4
-+
- #define CL_SIZE			COMMAND_LINE_SIZE
- 
- const char *get_system_type(void);
-diff -Nur linux-2.6.16/include/asm-mips/cpu.h linux-2.6.16-owrt/include/asm-mips/cpu.h
---- linux-2.6.16/include/asm-mips/cpu.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/cpu.h	2006-03-20 14:25:10.000000000 +0100
-@@ -53,6 +53,9 @@
- #define PRID_IMP_R12000		0x0e00
- #define PRID_IMP_R8000		0x1000
- #define PRID_IMP_PR4450		0x1200
-+#define PRID_IMP_RC32334	0x1800
-+#define PRID_IMP_RC32355	0x1900
-+#define PRID_IMP_RC32365	0x1900
- #define PRID_IMP_R4600		0x2000
- #define PRID_IMP_R4700		0x2100
- #define PRID_IMP_TX39		0x2200
-@@ -196,7 +199,8 @@
- #define CPU_34K			60
- #define CPU_PR4450		61
- #define CPU_SB1A		62
--#define CPU_LAST		62
-+#define CPU_RC32300		63
-+#define CPU_LAST		63
- 
- /*
-  * ISA Level encodings
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32300.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32300.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32300.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32300.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,142 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   RC32300 helper routines
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_RC32300_H__
-+#define __IDT_RC32300_H__
-+
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+
-+
-+/* cpu pipeline flush */
-+static inline void rc32300_sync(void)
-+{
-+	__asm__ volatile ("sync");
-+}
-+
-+static inline void rc32300_sync_udelay(int us)
-+{
-+	__asm__ volatile ("sync");
-+	udelay(us);
-+}
-+
-+static inline void rc32300_sync_delay(int ms)
-+{
-+	__asm__ volatile ("sync");
-+	mdelay(ms);
-+}
-+
-+/*
-+ * Macros to access internal RC32300 registers. No byte
-+ * swapping should be done when accessing the internal
-+ * registers.
-+ */
-+
-+static inline u8 rc32300_readb(unsigned long pa)
-+{
-+	return *((volatile u8 *)KSEG1ADDR(pa));
-+}
-+static inline u16 rc32300_readw(unsigned long pa)
-+{
-+	return *((volatile u16 *)KSEG1ADDR(pa));
-+}
-+static inline u32 rc32300_readl(unsigned long pa)
-+{
-+	return *((volatile u32 *)KSEG1ADDR(pa));
-+}
-+static inline void rc32300_writeb(u8 val, unsigned long pa)
-+{
-+	*((volatile u8 *)KSEG1ADDR(pa)) = val;
-+}
-+static inline void rc32300_writew(u16 val, unsigned long pa)
-+{
-+	*((volatile u16 *)KSEG1ADDR(pa)) = val;
-+}
-+static inline void rc32300_writel(u32 val, unsigned long pa)
-+{
-+	*((volatile u32 *)KSEG1ADDR(pa)) = val;
-+}
-+
-+
-+#define local_readb __raw_readb
-+#define local_readw __raw_readw
-+#define local_readl __raw_readl
-+
-+#define local_writeb __raw_writeb
-+#define local_writew __raw_writew
-+#define local_writel __raw_writel
-+
-+
-+/*
-+ * C access to CLZ and CLO instructions
-+ * (count leading zeroes/ones).
-+ */
-+static inline int rc32300_clz(unsigned long val)
-+{
-+	int ret;
-+	__asm__ volatile (
-+		".set\tnoreorder\n\t"
-+		".set\tnoat\n\t"
-+		".set\tmips32\n\t"
-+		"clz\t%0,%1\n\t"
-+		".set\tmips0\n\t"
-+		".set\tat\n\t"
-+		".set\treorder"
-+		: "=r" (ret)
-+		: "r" (val));
-+	
-+	return ret;
-+}
-+static inline int rc32300_clo(unsigned long val)
-+{
-+	int ret;
-+	__asm__ volatile (
-+		    ".set\tnoreorder\n\t"
-+		    ".set\tnoat\n\t"
-+		    ".set\tmips32\n\t"
-+		    "clo\t%0,%1\n\t"
-+		    ".set\tmips0\n\t"
-+		    ".set\tat\n\t"
-+		    ".set\treorder"
-+		    : "=r" (ret)
-+		    : "r" (val));
-+	
-+	return ret;
-+}
-+
-+#endif  // __IDT_RC32300_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32334.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32334.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32334.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32334.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,207 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Definitions for IDT RC32334 CPU.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+
-+#ifndef __IDT_RC32334_H__
-+#define __IDT_RC32334_H__
-+
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+
-+/* Base address of internal registers */
-+#define RC32334_REG_BASE   0x18000000
-+
-+/* CPU and IP Bus Control */
-+#define CPU_PORT_WIDTH     0xffffe200 // virtual!
-+#define CPU_BTA            0xffffe204 // virtual!
-+#define CPU_BUSERR_ADDR    0xffffe208 // virtual!
-+#define CPU_IP_BTA         (RC32334_REG_BASE + 0x0000)
-+#define CPU_IP_ADDR_LATCH  (RC32334_REG_BASE + 0x0004)
-+#define CPU_IP_ARBITRATION (RC32334_REG_BASE + 0x0008)
-+#define CPU_IP_BUSERR_CNTL (RC32334_REG_BASE + 0x0010)
-+#define CPU_IP_BUSERR_ADDR (RC32334_REG_BASE + 0x0014)
-+#define CPU_IP_SYSID       (RC32334_REG_BASE + 0x0018)
-+
-+/* Memory Controller */
-+#define MEM_BASE_BANK0     (RC32334_REG_BASE + 0x0080)
-+#define MEM_MASK_BANK0     (RC32334_REG_BASE + 0x0084)
-+#define MEM_CNTL_BANK0     (RC32334_REG_BASE + 0x0200)
-+#define MEM_BASE_BANK1     (RC32334_REG_BASE + 0x0088)
-+#define MEM_MASK_BANK1     (RC32334_REG_BASE + 0x008c)
-+#define MEM_CNTL_BANK1     (RC32334_REG_BASE + 0x0204)
-+#define MEM_CNTL_BANK2     (RC32334_REG_BASE + 0x0208)
-+#define MEM_CNTL_BANK3     (RC32334_REG_BASE + 0x020c)
-+#define MEM_CNTL_BANK4     (RC32334_REG_BASE + 0x0210)
-+#define MEM_CNTL_BANK5     (RC32334_REG_BASE + 0x0214)
-+
-+/* PCI Controller */
-+#define PCI_INTR_PEND      (RC32334_REG_BASE + 0x05b0)
-+#define PCI_INTR_MASK      (RC32334_REG_BASE + 0x05b4)
-+#define PCI_INTR_CLEAR     (RC32334_REG_BASE + 0x05b8)
-+#define CPU2PCI_INTR_PEND  (RC32334_REG_BASE + 0x05c0)
-+#define CPU2PCI_INTR_MASK  (RC32334_REG_BASE + 0x05c4)
-+#define CPU2PCI_INTR_CLEAR (RC32334_REG_BASE + 0x05c8)
-+#define PCI2CPU_INTR_PEND  (RC32334_REG_BASE + 0x05d0)
-+#define PCI2CPU_INTR_MASK  (RC32334_REG_BASE + 0x05d4)
-+#define PCI2CPU_INTR_CLEAR (RC32334_REG_BASE + 0x05d8)
-+#define PCI_MEM1_BASE      (RC32334_REG_BASE + 0x20b0)
-+#define PCI_MEM2_BASE      (RC32334_REG_BASE + 0x20b8)
-+#define PCI_MEM3_BASE      (RC32334_REG_BASE + 0x20c0)
-+#define PCI_IO1_BASE       (RC32334_REG_BASE + 0x20c8)
-+#define PCI_ARBITRATION    (RC32334_REG_BASE + 0x20e0)
-+#define PCI_CPU_MEM1_BASE  (RC32334_REG_BASE + 0x20e8)
-+#define PCI_CPU_IO_BASE    (RC32334_REG_BASE + 0x2100)
-+#define PCI_CFG_CNTL	   (RC32334_REG_BASE + 0x2cf8)
-+#define PCI_CFG_DATA	   (RC32334_REG_BASE + 0x2cfc)
-+
-+/* Timers */
-+#define TIMER0_CNTL        (RC32334_REG_BASE + 0x0700)
-+#define TIMER0_COUNT       (RC32334_REG_BASE + 0x0704)
-+#define TIMER0_COMPARE     (RC32334_REG_BASE + 0x0708)
-+#define TIMER_REG_OFFSET   0x10
-+
-+/* Programmable I/O */
-+#define PIO_DATA0          (RC32334_REG_BASE + 0x0600)
-+#define PIO_DATA1          (RC32334_REG_BASE + 0x0610)
-+
-+/*
-+ * DMA
-+ *
-+ * NOTE: DMA_IO is a trick for non linear RC32300_IO_DMA stuff
-+ *
-+ * DMA0: 18001400
-+ * DMA1: 18001440
-+ * DMA2: 18001900
-+ * DMA3: 18001940
-+ * NB: dma number must be immediate value or variable.
-+ *      It MUST NOT be a function since it would get called twice!
-+ */
-+#define DMA_IO(n)       (((n)>1?0x500:0)+((n)&1?0x40:0))
-+ 
-+#define RC32300_IO_DMA(n)       (RC32334_REG_BASE + 0x1400 + DMA_IO(n))
-+#define RC32300_DMA_CONFREG(n)  RC32300_IO_DMA(n)
-+#define RC32300_DMA_BASEREG(n)  (RC32300_IO_DMA(n)+0x4)
-+
-+#define RC32300_DMA_CURRREG(n)  (RC32300_IO_DMA(n)+0x8)
-+#define RC32300_DMA_STATREG(n)  (RC32300_IO_DMA(n)+0x10)
-+#define RC32300_DMA_SRCREG(n)   (RC32300_IO_DMA(n)+0x14)
-+#define RC32300_DMA_DSTREG(n)   (RC32300_IO_DMA(n)+0x18)
-+#define RC32300_DMA_NEXTREG(n)  (RC32300_IO_DMA(n)+0x1c)
-+
-+#define RC32300_DMA_IRQ(n)  (GROUP7_IRQ_BASE+5*(n))
-+
-+/* Expansion Interrupt Controller */
-+#define IC_GROUP0_PEND     (RC32334_REG_BASE + 0x0500)
-+#define IC_GROUP0_MASK     (RC32334_REG_BASE + 0x0504)
-+#define IC_GROUP0_CLEAR    (RC32334_REG_BASE + 0x0508)
-+#define IC_GROUP_OFFSET    0x10
-+
-+#define NUM_INTR_GROUPS    15
-+/*
-+ * The IRQ mapping is as follows:
-+ *
-+ *    IRQ         Mapped To
-+ *    ---     -------------------
-+ *     0      SW0  (IP0) SW0 intr
-+ *     1      SW1  (IP1) SW1 intr
-+ *     2      Int0 (IP2) board-specific
-+ *     3      Int1 (IP3) board-specific
-+ *     4      Int2 (IP4) board-specific
-+ *     -      Int3 (IP5) not used, mapped to IRQ's 8 and up
-+ *     6      Int4 (IP6) board-specific
-+ *     7      Int5 (IP7) CP0 Timer
-+ *
-+ * IRQ's 8 and up are all mapped to Int3 (IP5), which
-+ * internally on the RC32334 is routed to the Expansion
-+ * Interrupt Controller.
-+ */
-+#define MIPS_CPU_TIMER_IRQ 7
-+
-+#define GROUP1_IRQ_BASE  8                       // bus error
-+#define GROUP2_IRQ_BASE  (GROUP1_IRQ_BASE + 1)   // PIO active low
-+#define GROUP3_IRQ_BASE  (GROUP2_IRQ_BASE + 12)  // PIO active high
-+#define GROUP4_IRQ_BASE  (GROUP3_IRQ_BASE + 8)   // Timer Rollovers
-+#define GROUP5_IRQ_BASE  (GROUP4_IRQ_BASE + 8)   // UART0
-+#define GROUP6_IRQ_BASE  (GROUP5_IRQ_BASE + 3)   // UART1
-+#define GROUP7_IRQ_BASE  (GROUP6_IRQ_BASE + 3)   // DMA Ch0
-+#define GROUP8_IRQ_BASE  (GROUP7_IRQ_BASE + 5)   // DMA Ch1
-+#define GROUP9_IRQ_BASE  (GROUP8_IRQ_BASE + 5)   // DMA Ch2
-+#define GROUP10_IRQ_BASE (GROUP9_IRQ_BASE + 5)   // DMA Ch3
-+#define GROUP11_IRQ_BASE (GROUP10_IRQ_BASE + 5)  // PCI Ctlr errors
-+#define GROUP12_IRQ_BASE (GROUP11_IRQ_BASE + 4)  // PCI Satellite Mode
-+#define GROUP13_IRQ_BASE (GROUP12_IRQ_BASE + 16) // PCI to CPU Mailbox
-+#define GROUP14_IRQ_BASE (GROUP13_IRQ_BASE + 4)  // SPI
-+
-+#define RC32334_NR_IRQS  (GROUP14_IRQ_BASE + 1)
-+
-+/* 16550 UARTs */
-+#ifdef __MIPSEB__
-+#define RC32300_UART0_BASE (RC32334_REG_BASE + 0x0803)
-+#define RC32300_UART1_BASE (RC32334_REG_BASE + 0x0823)
-+#else
-+#define RC32300_UART0_BASE (RC32334_REG_BASE + 0x0800)
-+#define RC32300_UART1_BASE (RC32334_REG_BASE + 0x0820)
-+#endif
-+
-+#define RC32300_UART0_IRQ  GROUP5_IRQ_BASE
-+#define RC32300_UART1_IRQ  GROUP6_IRQ_BASE
-+
-+#define IDT_CLOCK_MULT 2
-+
-+/* NVRAM */
-+#define NVRAM_BASE         0x12000000
-+#define NVRAM_ENVSIZE_OFF  4
-+#define NVRAM_ENVSTART_OFF 0x40
-+
-+/* LCD 4-digit display */
-+#define LCD_CLEAR          0x14000400
-+#define LCD_DIGIT0         0x1400000f
-+#define LCD_DIGIT1         0x14000008
-+#define LCD_DIGIT2         0x14000007
-+#define LCD_DIGIT3         0x14000003
-+
-+/* Interrupts routed on 79S334A board (see rc32334.h) */
-+#define RC32334_SCC8530_IRQ  2
-+#define RC32334_PCI_INTA_IRQ 3
-+#define RC32334_PCI_INTB_IRQ 4
-+#define RC32334_PCI_INTC_IRQ 6
-+#define RC32334_PCI_INTD_IRQ 7
-+
-+#define RAM_SIZE	(32*1024*1024)
-+
-+#endif // __IDT_RC32334_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32355_dma.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32355_dma.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32355_dma.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32355_dma.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,206 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     DMA controller defines on IDT RC32355
-+ *
-+ *  Copyright 2004 IDT Inc.
-+ *  Author: Integrated Device Technology Inc. rischelp@idt.com
-+ *
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ *  May 2004 rkt
-+ *  Initial Release
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef BANYAN_DMA_H
-+#define BANYAN_DMA_H
-+#include  <asm/idt-boards/rc32300/rc32300.h>
-+
-+/*
-+ * An image of one RC32355 dma channel registers
-+ */
-+typedef struct {
-+	u32 dmac;
-+	u32 dmas;
-+	u32 dmasm;
-+	u32 dmadptr;
-+	u32 dmandptr;
-+} rc32355_dma_ch_t;
-+
-+/*
-+ * An image of all RC32355 dma channel registers
-+ */
-+typedef struct {
-+	rc32355_dma_ch_t ch[16];
-+} rc32355_dma_regs_t;
-+
-+
-+#define rc32355_dma_regs ((rc32355_dma_regs_t*)KSEG1ADDR(RC32355_DMA_BASE))
-+
-+
-+/* DMAC register layout */
-+
-+#define DMAC_RUN	0x1	/* Halts processing when cleared	*/
-+#define DMAC_DM		0x2	/* Done Mask, ignore DMA events		*/
-+#define DMAC_MODE_MASK	0xC	/* DMA operating mode			*/
-+
-+#define DMAC_MODE_AUTO	0x0	/* DMA Auto Request Mode		*/
-+#define DMAC_MODE_BURST	0x4	/* DMA Burst Request Mode		*/
-+#define DMAC_MODE_TFER	0x8	/* DMA Transfer Request Mode		*/
-+
-+/* DMAS and DMASM register layout */
-+
-+#define DMAS_F		0x01	/* Finished */
-+#define DMAS_D		0x02	/* Done */
-+#define DMAS_C		0x04	/* Chain */
-+#define DMAS_E		0x08	/* Error */
-+#define DMAS_H		0x10	/* Halt */
-+
-+/* Polling count for DMAS_H bit in DMAS register after halting DMA */
-+#define DMA_HALT_TIMEOUT 500
-+
-+
-+static inline int rc32355_halt_dma(rc32355_dma_ch_t* ch)
-+{
-+	int timeout=1;
-+	
-+	if (local_readl(&ch->dmac) & DMAC_RUN) {
-+		local_writel(0, &ch->dmac); 
-+		for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) {
-+			if (local_readl(&ch->dmas) & DMAS_H) {
-+				local_writel(0, &ch->dmas);  
-+				break;
-+			}
-+		}
-+	}
-+
-+	return timeout ? 0 : 1;
-+}
-+
-+static inline void rc32355_start_dma(rc32355_dma_ch_t* ch, u32 dma_addr)
-+{
-+	local_writel(0, &ch->dmandptr); 
-+	local_writel(dma_addr, &ch->dmadptr);
-+}
-+
-+static inline void rc32355_chain_dma(rc32355_dma_ch_t* ch, u32 dma_addr)
-+{
-+	local_writel(dma_addr, &ch->dmandptr);
-+}
-+
-+
-+/* The following can be used to describe DMA channels 0 to 15, and the	*/
-+/* sub device's needed to select them in the DMADESC_DS_MASK field	*/
-+
-+#define DMA_CHAN_ATM01		0	     /* ATM interface 0,1 chan	*/
-+
-+#define DMA_CHAN_ATM0IN		0	     /* ATM interface 0 input	*/
-+#define DMA_DEV_ATM0IN		0	     /* ATM interface 0 input	*/
-+
-+#define DMA_CHAN_ATM1IN		0	     /* ATM interface 1 input	*/
-+#define DMA_DEV_ATM1IN		1	     /* ATM interface 1 input	*/
-+
-+#define DMA_CHAN_ATM0OUT	0	     /* ATM interface 0 output	*/
-+#define DMA_DEV_ATM0OUT		2	     /* ATM interface 0 output	*/
-+
-+#define DMA_CHAN_ATM1OUT	0	     /* ATM interface 1 output	*/
-+#define DMA_DEV_ATM1OUT		3	     /* ATM interface 1 output	*/
-+
-+/* for entry in {0,1,2,3,4,5,6,7} - note 5,6,7 share with those below */
-+#define DMA_CHAN_ATMVCC(entry)	((entry)+1)  /* ATM VC cache entry 	*/
-+#define DMA_DEV_ATMVCC(entry)	0
-+
-+#define DMA_CHAN_MEMTOMEM	6	     /* Memory to memory DMA 	*/
-+#define DMA_DEV_MEMTOMEM	1	     /* Memory to memory DMA 	*/
-+
-+#define DMA_CHAN_ATMFMB0	7	     /* ATM Frame Mode Buffer 0	*/
-+#define DMA_DEV_ATMFMB0		1	     /* ATM Frame Mode Buffer 0	*/
-+
-+#define DMA_CHAN_ATMFMB1	8	     /* ATM Frame Mode Buffer 1	*/
-+#define DMA_DEV_ATMFMB1		1	     /* ATM Frame Mode Buffer 1	*/
-+
-+#define DMA_CHAN_ETHERIN	9	     /* Ethernet input		*/
-+#define DMA_DEV_ETHERIN		0	     /* Ethernet input		*/
-+
-+#define DMA_CHAN_ETHEROUT	10	     /* Ethernet output		*/
-+#define DMA_DEV_ETHEROUT	0	     /* Ethernet output		*/
-+
-+#define DMA_CHAN_TDMIN		11	     /* TDM Bus input		*/
-+#define DMA_DEV_TDMIN		0	     /* TDM Bus input		*/
-+
-+#define DMA_CHAN_TDMOUT		12	     /* TDM Bus output		*/
-+#define DMA_DEV_TDMOUT		0	     /* TDM Bus output		*/
-+
-+#define DMA_CHAN_USBIN		13	     /* USB input		*/
-+#define DMA_DEV_USBIN		0	     /* USB input		*/
-+
-+#define DMA_CHAN_USBOUT		14	     /* USB output		*/
-+#define DMA_DEV_USBOUT		0	     /* USB output		*/
-+
-+#define DMA_CHAN_EXTERN		15	     /* External DMA		*/
-+#define DMA_DEV_EXTERN		0	     /* External DMA		*/
-+
-+/*
-+ * An RC32355 dma descriptor in system memory
-+ */
-+typedef struct {
-+	u32 cmdstat;	/* control and status */
-+	u32 curr_addr;	/* current address of data */
-+	u32 devcs;	/* peripheral-specific control and status */
-+	u32 link;	/* link to next descriptor */
-+} rc32355_dma_desc_t;
-+
-+/* Values for the descriptor cmdstat word */
-+
-+#define DMADESC_F		0x80000000u  /* Finished bit		*/
-+#define DMADESC_D		0x40000000u  /* Done bit		*/
-+#define DMADESC_T		0x20000000u  /* Terminated bit		*/
-+#define DMADESC_IOD		0x10000000u  /* Interrupt On Done	*/
-+#define DMADESC_IOF		0x08000000u  /* Interrupt On Finished	*/
-+#define DMADESC_COD		0x04000000u  /* Chain On Done		*/
-+#define DMADESC_COF		0x02000000u  /* Chain On Finished	*/
-+
-+#define DMADESC_DEVCMD_MASK	0x01C00000u  /* Device Command mask	*/
-+#define DMADESC_DEVCMD_SHIFT	22	     /* Device Command shift	*/
-+
-+#define DMADESC_DS_MASK		0x00300000u  /* Device Select mask	*/
-+#define DMADESC_DS_SHIFT	20	     /* Device Select shift	*/
-+
-+#define DMADESC_COUNT_MASK	0x0003FFFFu  /* Byte Count mask		*/
-+#define DMADESC_COUNT_SHIFT	0	     /* Byte Count shift	*/
-+
-+#define IS_DMA_FINISHED(X)   ( ( (X) & DMADESC_F ) >> 31)   /* F Bit    */
-+#define IS_DMA_DONE(X)       ( ( (X) & DMADESC_D ) >> 30)   /* D Bit    */
-+#define IS_DMA_TERMINATED(X) ( ( (X) & DMADESC_T ) >> 29)   /* T Bit    */
-+#define IS_DMA_USED(X) (((X) & (DMADESC_F | DMADESC_D | DMADESC_T)) != 0)
-+
-+#define DMA_DEVCMD(devcmd) \
-+  (((devcmd) << DMADESC_DEVCMD_SHIFT) & DMADESC_DS_MASK)
-+#define DMA_DS(ds)         \
-+  (((ds) << DMADESC_DS_SHIFT) & DMADESC_DS_MASK)
-+#define DMA_COUNT(count)   \
-+  ((count) & DMADESC_COUNT_MASK)
-+
-+#endif /* RC32355_DMA_H */
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32355_eth.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32355_eth.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32355_eth.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32355_eth.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,442 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     Ethernet registers on IDT RC32355
-+ *
-+ *  Copyright 2004 IDT Inc.
-+ *  Author: Integrated Device Technology Inc. rischelp@idt.com
-+ *
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ *  May 2004 rkt
-+ *  Initial Release
-+ *
-+ **************************************************************************
-+ */
-+
-+
-+#ifndef RC32355_ETHER_H
-+#define RC32355_ETHER_H
-+
-+#include <asm/idt-boards/rc32300/rc32355_dma.h>
-+
-+/*
-+ * A partial image of the RC32355 ethernet registers
-+ */
-+typedef struct {
-+	u32 ethintfc;
-+	u32 ethfifott;
-+	u32 etharc;
-+	u32 ethhash0;
-+	u32 ethhash1;
-+	u32 ethfifost;
-+	u32 ethfifos;
-+	u32 ethodeops;
-+	u32 ethis;
-+	u32 ethos;
-+	u32 ethmcp;
-+	u32 _u1;
-+	u32 ethid;
-+	u32 _u2;
-+	u32 _u3;
-+	u32 _u4;
-+	u32 ethod;
-+	u32 _u5;
-+	u32 _u6;
-+	u32 _u7;
-+	u32 ethodeop;
-+	u32 _u8[43]; 
-+	u32 ethsal0;
-+	u32 ethsah0;
-+	u32 ethsal1;
-+	u32 ethsah1;
-+	u32 ethsal2;
-+	u32 ethsah2;
-+	u32 ethsal3;
-+	u32 ethsah3;
-+	u32 ethrbc;
-+	u32 ethrpc;
-+	u32 ethrupc;
-+	u32 ethrfc;
-+	u32 ethtbc;
-+	u32 ethgpf;
-+	u32 _u9[50];
-+	u32 ethmac1;
-+	u32 ethmac2;
-+	u32 ethipgt;
-+	u32 ethipgr;
-+	u32 ethclrt;
-+	u32 ethmaxf;
-+	u32 _u10;
-+	u32 ethmtest;
-+	u32 miimcfg;
-+	u32 miimcmd;
-+	u32 miimaddr;
-+	u32 miimwtd;
-+	u32 miimrdd;
-+	u32 miimind;
-+	u32 _u11;
-+	u32 _u12;
-+	u32 ethcfsa0;
-+	u32 ethcfsa1;
-+	u32 ethcfsa2;
-+} rc32355_eth_regs_t;
-+ 
-+#define rc32355_eth_regs ((rc32355_eth_regs_t*)KSEG1ADDR(RC32355_ETH_BASE))
-+
-+#define ETH_INTFC   (RC32355_ETH_BASE + 0x000) /* INTerFace Control  */
-+#define ETH_FIFOTT  (RC32355_ETH_BASE + 0x004) /* FIFO Transmit Threshold  */
-+#define ETH_ARC     (RC32355_ETH_BASE + 0x008) /* Address Recognition Ctrl  */
-+#define ETH_HASH0   (RC32355_ETH_BASE + 0x00C) /* 32 multicast Hash bits */
-+#define ETH_HASH1   (RC32355_ETH_BASE + 0x010) /* another 32 Hash bits */
-+#define ETH_FIFOST  (RC32355_ETH_BASE + 0x014) /* FIFO Status Threshold */
-+#define ETH_FIFOS   (RC32355_ETH_BASE + 0x018) /* FIFO Status Register */
-+#define ETH_ODEOPS  (RC32355_ETH_BASE + 0x01C) /* Out Data End-Of-Pkt Size */
-+#define ETH_IS      (RC32355_ETH_BASE + 0x020) /* Input Status */
-+#define ETH_OS      (RC32355_ETH_BASE + 0x024) /* Output Status  */
-+#define ETH_MCP     (RC32355_ETH_BASE + 0x028) /* Managemt Clock Prescaler */
-+#define ETH_ID      (RC32355_ETH_BASE + 0x030) /* Input Data register */
-+#define ETH_OD      (RC32355_ETH_BASE + 0x040) /* Output Data register */
-+#define ETH_ODEOP   (RC32355_ETH_BASE + 0x050) /* OD End-Of-Packet Size */
-+
-+/* for n in { 0, 1, 2, 3 } */
-+#define ETH_SAL(n)  (RC32355_ETH_BASE + 0x100 + (n * 8)) /* Stn Address 2-5 */
-+#define ETH_SAH(n)  (RC32355_ETH_BASE + 0x104 + (n * 8)) /* Stn Address 0-1 */
-+
-+#define ETH_RBC     (RC32355_ETH_BASE + 0x120) /* Receive Byte Count */
-+#define ETH_RPC     (RC32355_ETH_BASE + 0x124) /* Receive Packet Count */
-+#define ETH_RUPC    (RC32355_ETH_BASE + 0x128) /* Rx Undersized Pkt count */
-+#define ETH_RFC     (RC32355_ETH_BASE + 0x12C) /* Receive Fragment Count */
-+#define ETH_TBC     (RC32355_ETH_BASE + 0x130) /* Transmit Byte Count */
-+#define ETH_GPF     (RC32355_ETH_BASE + 0x134) /* Generate Pause Frame */
-+#define ETH_MAC1    (RC32355_ETH_BASE + 0x200) /* Medium Access Control 1 */
-+#define ETH_MAC2    (RC32355_ETH_BASE + 0x204) /* Medium Access Control 2 */
-+#define ETH_IPGT    (RC32355_ETH_BASE + 0x208) /* Back-to-back InterPkt Gap */
-+#define ETH_IPGR    (RC32355_ETH_BASE + 0x20C) /* Non " InterPkt Gap */
-+#define ETH_CLRT    (RC32355_ETH_BASE + 0x210) /* Collis'n Window and Retry */
-+#define ETH_MAXF    (RC32355_ETH_BASE + 0x214) /* Maximum Frame Length */
-+#define ETH_MTEST   (RC32355_ETH_BASE + 0x21C) /* MAC Test */
-+
-+#define ETHMIIM_CFG (RC32355_ETH_BASE + 0x220) /* MII Mgmt Configuration */
-+#define ETHMIIM_CMD (RC32355_ETH_BASE + 0x224) /* MII Mgmt Command  */
-+#define ETHMIIM_ADDR (RC32355_ETH_BASE + 0x228) /* MII Mgmt Address */
-+#define ETHMIIM_WTD (RC32355_ETH_BASE + 0x22C) /* MII Mgmt Write Data */
-+#define ETHMIIM_RDD (RC32355_ETH_BASE + 0x230) /* MII Mgmt Read Data */
-+#define ETHMIIM_IND (RC32355_ETH_BASE + 0x234) /* MII Mgmt Indicators */
-+
-+/* for n in { 0, 1, 2 } */
-+#define ETH_CFSA(n) (RC32355_ETH_BASE + 0x240 + ((n) * 4))  /* Station Addr */
-+
-+
-+/*
-+ * Register Interpretations follow
-+ */
-+
-+/******************************************************************************
-+ * ETHINTFC register
-+ *****************************************************************************/
-+
-+#define ETHERINTFC_EN            (1<<0)
-+#define ETHERINTFC_ITS           (1<<1)
-+#define ETHERINTFC_RES           (1<<2)
-+#define ETHERINTFC_RIP           (1<<2)
-+#define ETHERINTFC_JAM           (1<<3)
-+
-+/******************************************************************************
-+ * ETHFIFOTT register
-+ *****************************************************************************/
-+
-+#define ETHERFIFOTT_TTH(v)      (((v)&0x3f)<<0)
-+
-+/******************************************************************************
-+ * ETHARC register
-+ *****************************************************************************/
-+
-+#define ETHERARC_PRO             (1<<0)
-+#define ETHERARC_AM              (1<<1)
-+#define ETHERARC_AFM             (1<<2)
-+#define ETHERARC_AB              (1<<3)
-+
-+/******************************************************************************
-+ * ETHHASH registers
-+ *****************************************************************************/
-+
-+#define ETHERHASH0(v)            (((v)&0xffff)<<0)
-+#define ETHERHASH1(v)            (((v)&0xffff)<<0)
-+
-+/******************************************************************************
-+ * ETHSA registers
-+ *****************************************************************************/
-+
-+#define ETHERSAL0(v)             (((v)&0xffff)<<0)
-+#define ETHERSAL1(v)             (((v)&0xffff)<<0)
-+#define ETHERSAL2(v)             (((v)&0xffff)<<0)
-+#define ETHERSAL3(v)             (((v)&0xffff)<<0)
-+#define ETHERSAH0(v)             (((v)&0xff)<<0)
-+#define ETHERSAH1(v)             (((v)&0xff)<<0)
-+#define ETHERSAH2(v)             (((v)&0xff)<<0)
-+#define ETHERSAH3(v)             (((v)&0xff)<<0)
-+
-+/******************************************************************************
-+ * ETHFIFOST register
-+ *****************************************************************************/
-+
-+#define ETHERFIFOST_IRTH(v)      (((v)&0x3f)<<0)
-+#define ETHERFIFOST_ORTH(v)      (((v)&0x3f)<<16)
-+
-+/******************************************************************************
-+ * ETHFIFOS register
-+ *****************************************************************************/
-+
-+#define ETHERFIFOS_IR            (1<<0)
-+#define ETHERFIFOS_OR            (1<<1)  
-+#define ETHERFIFOS_OVR           (1<<2)  
-+#define ETHERFIFOS_UND           (1<<3)  
-+
-+/******************************************************************************
-+ * DATA registers
-+ *****************************************************************************/
-+
-+#define ETHERID(v)               (((v)&0xffff)<<0)
-+#define ETHEROD(v)               (((v)&0xffff)<<0)
-+
-+/******************************************************************************
-+ * ETHODEOPS register
-+ *****************************************************************************/
-+
-+#define ETHERODEOPS_SIZE(v)      (((v)&0x3)<<0)
-+
-+/******************************************************************************
-+ * ETHODEOP register
-+ *****************************************************************************/
-+
-+#define ETHERODEOP(v)            (((v)&0xffff)<<0)
-+
-+/******************************************************************************
-+ * ETHIS register
-+ *****************************************************************************/
-+
-+#define ETHERIS_EOP              (1<<0)  
-+#define ETHERIS_ROK              (1<<2)  
-+#define ETHERIS_FM               (1<<3)  
-+#define ETHERIS_MP               (1<<4)  
-+#define ETHERIS_BP               (1<<5)  
-+#define ETHERIS_VLT              (1<<6)  
-+#define ETHERIS_CF               (1<<7)  
-+#define ETHERIS_OVR              (1<<8)  
-+#define ETHERIS_CRC              (1<<9)  
-+#define ETHERIS_CV               (1<<10)  
-+#define ETHERIS_DB               (1<<11)  
-+#define ETHERIS_LE               (1<<12)  
-+#define ETHERIS_LOR              (1<<13)  
-+#define ETHERIS_SIZE(v)          (((v)&0x3)<<14)
-+#define ETHERIS_LENGTH(v)        (((v)&0xff)<<16)
-+
-+/******************************************************************************
-+ * ETHOS register
-+ *****************************************************************************/
-+
-+#define ETHEROS_T                (1<<0)  
-+#define ETHEROS_TOK              (1<<6)  
-+#define ETHEROS_MP               (1<<7)  
-+#define ETHEROS_BP               (1<<8)  
-+#define ETHEROS_UND              (1<<9)  
-+#define ETHEROS_OF               (1<<10)  
-+#define ETHEROS_ED               (1<<11)  
-+#define ETHEROS_EC               (1<<12)  
-+#define ETHEROS_LC               (1<<13)  
-+#define ETHEROS_TD               (1<<14)  
-+#define ETHEROS_CRC              (1<<15)  
-+#define ETHEROS_LE               (1<<16)  
-+#define ETHEROS_CC(v)            (((v)&0xf)<<17)
-+#define ETHEROS_PFD              (1<<21)  
-+
-+/******************************************************************************
-+ * Statistics registers
-+ *****************************************************************************/
-+
-+#define ETHERRBC(v)              (((v)&0xffff)<<0)
-+#define ETHERRPC(v)              (((v)&0xffff)<<0)
-+#define ETHERRUPC(v)             (((v)&0xffff)<<0)
-+#define ETHERRFC(v)              (((v)&0xffff)<<0)
-+#define ETHERTBC(v)              (((v)&0xffff)<<0)
-+
-+/******************************************************************************
-+ * ETHGPF register
-+ *****************************************************************************/
-+
-+#define ETHERGPF_PTV(v)          (((v)&0xff)<<0)
-+
-+/******************************************************************************
-+ * MAC registers
-+ *****************************************************************************/
-+//ETHMAC1
-+#define ETHERMAC1_RE             (1<<0)
-+#define ETHERMAC1_PAF            (1<<1)
-+#define ETHERMAC1_RFC            (1<<2)
-+#define ETHERMAC1_TFC            (1<<3)
-+#define ETHERMAC1_LB             (1<<4)
-+#define ETHERMAC1_MR             (1<<15)
-+
-+//ETHMAC2
-+#define ETHERMAC2_FD             (1<<0)
-+#define ETHERMAC2_FLC            (1<<1)
-+#define ETHERMAC2_HFE            (1<<2)
-+#define ETHERMAC2_DC             (1<<3)
-+#define ETHERMAC2_CEN            (1<<4)
-+#define ETHERMAC2_PE             (1<<5)
-+#define ETHERMAC2_VPE            (1<<6)
-+#define ETHERMAC2_APE            (1<<7)
-+#define ETHERMAC2_PPE            (1<<8)
-+#define ETHERMAC2_LPE            (1<<9)
-+#define ETHERMAC2_NB             (1<<12)
-+#define ETHERMAC2_BP             (1<<13)
-+#define ETHERMAC2_ED             (1<<14)
-+
-+//ETHIPGT
-+#define ETHERIPGT(v)             (((v)&0x3f)<<0)
-+
-+//ETHIPGR
-+#define ETHERIPGR_IPGR1(v)       (((v)&0x3f)<<0)
-+#define ETHERIPGR_IPGR2(v)       (((v)&0x3f)<<8)
-+
-+//ETHCLRT
-+#define ETHERCLRT_MAXRET(v)      (((v)&0x3f)<<0)
-+#define ETHERCLRT_COLWIN(v)      (((v)&0x3f)<<8)
-+
-+//ETHMAXF
-+#define ETHERMAXF(v)             (((v)&0x3f)<<0)
-+
-+//ETHMTEST
-+#define ETHERMTEST_TB            (1<<2)
-+
-+//ETHMCP
-+#define ETHERMCP_DIV(v)          (((v)&0xff)<<0)
-+
-+//MIIMCFG
-+#define ETHERMIIMCFG_CS(v)          (((v)&0x3)<<2)
-+#define ETHERMIIMCFG_R              (1<<15)
-+
-+//MIIMCMD
-+#define ETHERMIIMCMD_RD             (1<<0)
-+#define ETHERMIIMCMD_SCN            (1<<1)
-+
-+//MIIMADDR
-+#define ETHERMIIMADDR_REGADDR(v)    (((v)&0x1f)<<0)
-+#define ETHERMIIMADDR_PHYADDR(v)    (((v)&0x1f)<<8)
-+
-+//MIIMWTD
-+#define ETHERMIIMWTD(v)             (((v)&0xff)<<0)
-+
-+//MIIMRDD
-+#define ETHERMIIMRDD(v)             (((v)&0xff)<<0)
-+
-+//MIIMIND
-+#define ETHERMIIMIND_BSY            (1<<0)
-+#define ETHERMIIMIND_SCN            (1<<1)
-+#define ETHERMIIMIND_NV             (1<<2)
-+
-+//DMA DEVCS IN
-+#define ETHERDMA_IN_LENGTH(v)	(((v)&0xffff)<<16)
-+#define ETHERDMA_IN_CES		(1<<14)
-+#define ETHERDMA_IN_LOR		(1<<13)
-+#define ETHERDMA_IN_LE		(1<<12)
-+#define ETHERDMA_IN_DB		(1<<11)
-+#define ETHERDMA_IN_CV		(1<<10)
-+#define ETHERDMA_IN_CRC		(1<<9)
-+#define ETHERDMA_IN_OVR		(1<<8)
-+#define ETHERDMA_IN_CF		(1<<7)
-+#define ETHERDMA_IN_VLT		(1<<6)
-+#define ETHERDMA_IN_BP		(1<<5)
-+#define ETHERDMA_IN_MP		(1<<4)
-+#define ETHERDMA_IN_FM		(1<<3)
-+#define ETHERDMA_IN_ROK		(1<<2)
-+#define ETHERDMA_IN_LD		(1<<1)
-+#define ETHERDMA_IN_FD		(1<<0)
-+
-+//DMA DEVCS OUT
-+#define ETHERDMA_OUT_CC(v)	(((v)&0xf)<<17)
-+#define ETHERDMA_OUT_CNT         0x001e0000
-+#define ETHERDMA_OUT_SHFT       17
-+#define ETHERDMA_OUT_LE		(1<<16)
-+
-+#define ETHERDMA_OUT_CRC	(1<<15)
-+#define ETHERDMA_OUT_TD		(1<<14)
-+#define ETHERDMA_OUT_LC		(1<<13)
-+#define ETHERDMA_OUT_EC		(1<<12)
-+#define ETHERDMA_OUT_ED		(1<<11)
-+#define ETHERDMA_OUT_OF		(1<<10)
-+#define ETHERDMA_OUT_UND	(1<<9)
-+#define ETHERDMA_OUT_BP		(1<<8)
-+#define ETHERDMA_OUT_MP		(1<<7)
-+#define ETHERDMA_OUT_TOK	(1<<6)
-+#define ETHERDMA_OUT_HEN	(1<<5)
-+#define ETHERDMA_OUT_CEN	(1<<4)
-+#define ETHERDMA_OUT_PEN	(1<<3)
-+#define ETHERDMA_OUT_OEN	(1<<2)
-+#define ETHERDMA_OUT_LD		(1<<1)
-+#define ETHERDMA_OUT_FD		(1<<0)
-+
-+#define RCV_ERRS \
-+  (ETHERDMA_IN_OVR | ETHERDMA_IN_CRC | ETHERDMA_IN_CV | ETHERDMA_IN_LE)
-+#define TX_ERRS  \
-+  (ETHERDMA_OUT_LC | ETHERDMA_OUT_EC | ETHERDMA_OUT_ED | \
-+   ETHERDMA_OUT_OF | ETHERDMA_OUT_UND)
-+
-+#define IS_RCV_ROK(X)        (((X) & (1<<2)) >> 2)       /* Receive Okay     */
-+#define IS_RCV_FM(X)         (((X) & (1<<3)) >> 3)       /* Is Filter Match  */
-+#define IS_RCV_MP(X)         (((X) & (1<<4)) >> 4)       /* Is it MP         */
-+#define IS_RCV_BP(X)         (((X) & (1<<5)) >> 5)       /* Is it BP         */
-+#define IS_RCV_VLT(X)        (((X) & (1<<6)) >> 6)       /* VLAN Tag Detect  */
-+#define IS_RCV_CF(X)         (((X) & (1<<7)) >> 7)       /* Control Frame    */
-+#define IS_RCV_OVR_ERR(X)    (((X) & (1<<8)) >> 8)       /* Receive Overflow */
-+#define IS_RCV_CRC_ERR(X)    (((X) & (1<<9)) >> 9)       /* CRC Error        */
-+#define IS_RCV_CV_ERR(X)     (((X) & (1<<10))>>10)       /* Code Violation   */
-+#define IS_RCV_DB_ERR(X)     (((X) & (1<<11))>>11)       /* Dribble Bits     */
-+#define IS_RCV_LE_ERR(X)     (((X) & (1<<12))>>12)       /* Length error     */
-+#define IS_RCV_LOR_ERR(X)    (((X) & (1<<13))>>13)       /* Length Out of
-+                                                            Range            */
-+#define IS_RCV_CES_ERR(X)    (((X) & (1<<14))>>14)       /* Preamble error   */
-+#define RCVPKT_LENGTH(X)     (((X) & 0xFFFF0000)>>16)    /* Length of the
-+                                                            received packet  */
-+
-+#define IS_TX_TOK(X)         (((X) & (1<<6) ) >> 6 )     /* Transmit Okay    */
-+#define IS_TX_MP(X)          (((X) & (1<<7) ) >> 7 )     /* Multicast        */
-+
-+#define IS_TX_BP(X)          (((X) & (1<<8) ) >> 8 )     /* Broadcast        */
-+#define IS_TX_UND_ERR(X)     (((X) & (1<<9) ) >> 9 )     /* Transmit FIFO
-+                                                            Underflow        */
-+#define IS_TX_OF_ERR(X)      (((X) & (1<<10)) >>10 )     /* Oversized frame  */
-+#define IS_TX_ED_ERR(X)      (((X) & (1<<11)) >>11 )     /* Excessive
-+							    deferral        */
-+#define IS_TX_EC_ERR(X)      (((X) & (1<<12)) >>12 )     /* Excessive
-+							    collisions      */
-+#define IS_TX_LC_ERR(X)      (((X) & (1<<13)) >>13 )     /* Late Collision   */
-+#define IS_TX_TD_ERR(X)      (((X) & (1<<14)) >>14 )     /* Transmit deferred*/
-+#define IS_TX_CRC_ERR(X)     (((X) & (1<<15)) >>15 )     /* CRC Error        */
-+#define IS_TX_LE_ERR(X)      (((X) & (1<<16)) >>16 )     /* Length Error     */
-+
-+#define TX_COLLISION_COUNT(X) (((X) & 0x001E0000u)>>17)  /* Collision Count  */
-+
-+#endif /* RC32355_ETHER_H */
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32355.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32355.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32355.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32355.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,177 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     Definitions for IDT RC32355 CPU.
-+ *
-+ *  Copyright 2004 IDT Inc.
-+ *  Author: Integrated Device Technology Inc. rischelp@idt.com
-+ *
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ *  May 2004 rkt
-+ *  Initial Release
-+ *
-+ **************************************************************************
-+ */
-+
-+
-+#ifndef _RC32355_H_
-+#define _RC32355_H_
-+
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+
-+/* Base address of internal registers */
-+#define RC32355_REG_BASE   0x18000000
-+
-+/* System ID Registers */
-+#define CPU_SYSID          (RC32355_REG_BASE + 0x00018)
-+#define CPU_BTADDR         (RC32355_REG_BASE + 0x0001c)
-+#define CPU_REV            (RC32355_REG_BASE + 0x0002c)
-+
-+/* Reset Controller */
-+#define RESET_CNTL         (RC32355_REG_BASE + 0x08000)
-+
-+/* Device Controller */
-+#define DEV0_BASE          (RC32355_REG_BASE + 0x10000)
-+#define DEV0_MASK          (RC32355_REG_BASE + 0x10004)
-+#define DEV0_CNTL          (RC32355_REG_BASE + 0x10008)
-+#define DEV0_TIMING        (RC32355_REG_BASE + 0x1000c)
-+#define DEV_REG_OFFSET     0x10
-+
-+/* SDRAM Controller */
-+#define SDRAM0_BASE        (RC32355_REG_BASE + 0x18000)
-+#define SDRAM0_MASK        (RC32355_REG_BASE + 0x18004)
-+#define SDRAM1_BASE        (RC32355_REG_BASE + 0x18008)
-+#define SDRAM1_MASK        (RC32355_REG_BASE + 0x1800c)
-+#define SDRAM_CNTL         (RC32355_REG_BASE + 0x18010)
-+
-+/* Bus Arbiter */
-+#define BUS_ARB_CNTL0      (RC32355_REG_BASE + 0x20000)
-+#define BUS_ARB_CNTL1      (RC32355_REG_BASE + 0x20004)
-+
-+/* Counters/Timers */
-+#define TIMER0_COUNT       (RC32355_REG_BASE + 0x28000)
-+#define TIMER0_COMPARE     (RC32355_REG_BASE + 0x28004)
-+#define TIMER0_CNTL        (RC32355_REG_BASE + 0x28008)
-+#define TIMER_REG_OFFSET   0x0C
-+
-+/* System Integrity */
-+
-+/* Interrupt Controller */
-+#define IC_GROUP0_PEND     (RC32355_REG_BASE + 0x30000)
-+#define IC_GROUP0_MASK     (RC32355_REG_BASE + 0x30004)
-+#define IC_GROUP_OFFSET    0x08
-+
-+#define NUM_INTR_GROUPS    5
-+/*
-+ * The IRQ mapping is as follows:
-+ *
-+ *    IRQ         Mapped To
-+ *    ---     -------------------
-+ *     0      SW0  (IP0) SW0 intr
-+ *     1      SW1  (IP1) SW1 intr
-+ *     -      Int0 (IP2) mapped to GROUP0_IRQ_BASE
-+ *     -      Int1 (IP3) mapped to GROUP1_IRQ_BASE
-+ *     -      Int2 (IP4) mapped to GROUP2_IRQ_BASE
-+ *     -      Int3 (IP5) mapped to GROUP3_IRQ_BASE
-+ *     -      Int4 (IP6) mapped to GROUP4_IRQ_BASE
-+ *     7      Int5 (IP7) CP0 Timer
-+ *
-+ * IRQ's 8 and up are all mapped to Int0-4 (IP2-IP6), which
-+ * internally on the RC32355 is routed to the Expansion
-+ * Interrupt Controller.
-+ */
-+#define MIPS_CPU_TIMER_IRQ 7
-+
-+#define GROUP0_IRQ_BASE  8                      // Counter/Timers, UCW
-+#define GROUP1_IRQ_BASE  (GROUP0_IRQ_BASE + 32) // DMA
-+#define GROUP2_IRQ_BASE  (GROUP1_IRQ_BASE + 32) // ATM
-+#define GROUP3_IRQ_BASE  (GROUP2_IRQ_BASE + 32) // TDM, Eth, USB, UARTs, I2C
-+#define GROUP4_IRQ_BASE  (GROUP3_IRQ_BASE + 32) // GPIO
-+
-+#define RC32355_NR_IRQS  (GROUP4_IRQ_BASE + 32)
-+
-+/* DMA - see rc32355_dma.h for full list of registers */
-+
-+#define RC32355_DMA_BASE (RC32355_REG_BASE + 0x38000)
-+#define DMA_CHAN_OFFSET  0x14
-+
-+/* GPIO Controller */
-+
-+/* TDM Bus */
-+
-+/* 16550 UARTs */
-+#ifdef __MIPSEB__
-+#define RC32300_UART0_BASE (RC32355_REG_BASE + 0x50003)
-+#define RC32300_UART1_BASE (RC32355_REG_BASE + 0x50023)
-+#else
-+#define RC32300_UART0_BASE (RC32355_REG_BASE + 0x50000)
-+#define RC32300_UART1_BASE (RC32355_REG_BASE + 0x50020)
-+#endif
-+
-+#define RC32300_UART0_IRQ  (GROUP3_IRQ_BASE + 14)
-+#define RC32300_UART1_IRQ  (GROUP3_IRQ_BASE + 17)
-+
-+/* ATM */
-+
-+/* Ethernet - see rc32355_eth.h for full list of registers */
-+
-+#define RC32355_ETH_BASE   (RC32355_REG_BASE + 0x60000)
-+
-+
-+#define IDT_CLOCK_MULT 2
-+
-+/* Memory map of 79EB355 board */
-+
-+/* DRAM */
-+#define RAM_BASE        0x00000000
-+#define RAM_SIZE	(32*1024*1024)
-+
-+/* SRAM (device 1) */
-+#define SRAM_BASE       0x02000000
-+#define SRAM_SIZE       0x00100000
-+
-+/* FLASH (device 2) */
-+#define FLASH_BASE      0x0C000000
-+#define FLASH_SIZE      0x00C00000
-+
-+/* ATM PHY (device 4) */
-+#define ATM_PHY_BASE    0x14000000
-+
-+/* TDM switch (device 3) */
-+#define TDM_BASE        0x1A000000
-+
-+/* LCD panel (device 3) */
-+#define LCD_BASE        0x1A002000
-+
-+/* RTC (DS1511W) (device 3) */
-+#define RTC_BASE        0x1A004000
-+
-+/* NVRAM (256 bytes internal to the DS1511 RTC) */
-+#define NVRAM_ADDR      RTC_BASE + 0x10
-+#define NVRAM_DATA      RTC_BASE + 0x13
-+#define NVRAM_ENVSIZE_OFF  4
-+#define NVRAM_ENVSTART_OFF 32
-+
-+#endif /* _RC32355_H_ */
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_dma.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_dma.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_dma.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_dma.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,226 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   RC32365/336 DMA hardware abstraction.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_RC32365_DMA_H__
-+#define __IDT_RC32365_DMA_H__
-+
-+enum
-+{
-+	DMA0_PhysicalAddress	= 0x18038000,
-+	DMA_PhysicalAddress	= DMA0_PhysicalAddress,		// Default
-+
-+	DMA0_VirtualAddress	= 0xb8038000,
-+	DMA_VirtualAddress	= DMA0_VirtualAddress,		// Default
-+} ;
-+
-+/*
-+ * DMA descriptor (in physical memory).
-+ */
-+
-+typedef struct DMAD_s
-+{
-+	u32			control ;	// Control. use DMAD_*
-+	u32			ca ;		// Current Address.
-+	u32			devcs ; 	// Device control and status.
-+	u32			link ;		// Next descriptor in chain.
-+} volatile *DMAD_t ;
-+
-+enum
-+{
-+	DMAD_size		= sizeof (struct DMAD_s),
-+	DMAD_count_b		= 0,		// in DMAD_t -> control
-+	DMAD_count_m		= 0x0003ffff,	// in DMAD_t -> control
-+	DMAD_ds_b		= 20,		// in DMAD_t -> control
-+	DMAD_ds_m		= 0x00300000,	// in DMAD_t -> control
-+	DMAD_ds_extToMem0_v	= 0,
-+	DMAD_ds_memToExt0_v	= 1,
-+	DMAD_ds_extToMem1_v	= 0,
-+	DMAD_ds_memToExt1_v	= 1,
-+	DMAD_ds_ethRcv0_v	= 0,
-+	DMAD_ds_ethXmt0_v	= 0,
-+	DMAD_ds_ethRcv1_v	= 0,
-+	DMAD_ds_ethXmt2_v	= 0,
-+	DMAD_ds_memToFifo_v	= 0,
-+	DMAD_ds_fifoToMem_v	= 0,
-+	DMAD_ds_rng_de_v	   = 1,//randomNumberGenerator on LC/DE
-+	DMAD_ds_pciToMem_v	= 0,
-+	DMAD_ds_memToPci_v	= 0,
-+	DMAD_ds_securityInput_v = 0,
-+	DMAD_ds_securityOutput_v = 0,
-+	DMAD_ds_rng_se_v	= 0,//randomNumberGenerator on SE
-+	
-+	DMAD_devcmd_b		= 22,		// in DMAD_t -> control
-+	DMAD_devcmd_m		= 0x01c00000,	// in DMAD_t -> control
-+	DMAD_devcmd_byte_v	= 0,	//memory-to-memory
-+	DMAD_devcmd_halfword_v	= 1,	//memory-to-memory
-+	DMAD_devcmd_word_v	= 2,	//memory-to-memory
-+	DMAD_devcmd_2words_v	= 3,	//memory-to-memory
-+	DMAD_devcmd_4words_v	= 4,	//memory-to-memory
-+	DMAD_devcmd_6words_v	= 5,	//memory-to-memory
-+	DMAD_devcmd_8words_v	= 6,	//memory-to-memory
-+	DMAD_devcmd_16words_v	= 7,	//memory-to-memory
-+	DMAD_cof_b		= 25,		// chain on finished
-+	DMAD_cof_m		= 0x02000000,	// 
-+	DMAD_cod_b		= 26,		// chain on done
-+	DMAD_cod_m		= 0x04000000,	// 
-+	DMAD_iof_b		= 27,		// interrupt on finished
-+	DMAD_iof_m		= 0x08000000,	// 
-+	DMAD_iod_b		= 28,		// interrupt on done
-+	DMAD_iod_m		= 0x10000000,	// 
-+	DMAD_t_b		= 29,		// terminated
-+	DMAD_t_m		= 0x20000000,	// 
-+	DMAD_d_b		= 30,		// done
-+	DMAD_d_m		= 0x40000000,	// 
-+	DMAD_f_b		= 31,		// finished
-+	DMAD_f_m		= 0x80000000,	// 
-+} ;
-+
-+/*
-+ * DMA register (within Internal Register Map).
-+ */
-+
-+struct DMA_Chan_s
-+{
-+	u32		dmac ;		// Control.
-+	u32		dmas ;		// Status.	
-+	u32		dmasm ; 	// Mask.
-+	u32		dmadptr ;	// Descriptor pointer.
-+	u32		dmandptr ;	// Next descriptor pointer.
-+};
-+
-+typedef struct DMA_Chan_s volatile *DMA_Chan_t ;
-+
-+//DMA_Channels	  use DMACH_count instead
-+
-+enum
-+{
-+	DMAC_run_b	= 0,		// 
-+	DMAC_run_m	= 0x00000001,	// 
-+	DMAC_dm_b	= 1,		// done mask
-+	DMAC_dm_m	= 0x00000002,	// 
-+	DMAC_mode_b	= 2,		// 
-+	DMAC_mode_m	= 0x0000000c,	// 
-+	DMAC_mode_auto_v	= 0,
-+	DMAC_mode_burst_v	= 1,
-+	DMAC_mode_transfer_v	= 2, //usually used
-+	DMAC_mode_reserved_v	= 3,
-+	DMAC_a_b	= 4,		// 
-+	DMAC_a_m	= 0x00000010,	// 
-+	
-+	DMAS_f_b	= 0,		// finished (sticky) 
-+	DMAS_f_m	= 0x00000001,	//		     
-+	DMAS_d_b	= 1,		// done (sticky)     
-+	DMAS_d_m	= 0x00000002,	//		     
-+	DMAS_c_b	= 2,		// chain (sticky)    
-+	DMAS_c_m	= 0x00000004,	//		     
-+	DMAS_e_b	= 3,		// error (sticky)    
-+	DMAS_e_m	= 0x00000008,	//		     
-+	DMAS_h_b	= 4,		// halt (sticky)     
-+	DMAS_h_m	= 0x00000010,	//		     
-+
-+	DMASM_f_b	= 0,		// finished (1=mask)
-+	DMASM_f_m	= 0x00000001,	// 
-+	DMASM_d_b	= 1,		// done (1=mask)
-+	DMASM_d_m	= 0x00000002,	// 
-+	DMASM_c_b	= 2,		// chain (1=mask)
-+	DMASM_c_m	= 0x00000004,	// 
-+	DMASM_e_b	= 3,		// error (1=mask)
-+	DMASM_e_m	= 0x00000008,	// 
-+	DMASM_h_b	= 4,		// halt (1=mask)
-+	DMASM_h_m	= 0x00000010,	// 
-+} ;
-+
-+/*
-+ * DMA channel definitions
-+ */
-+
-+enum
-+{
-+	DMACH_ethRcv0 = 0,
-+	DMACH_ethXmt0 = 1,
-+	DMACH_ethRcv1 = 2,
-+	DMACH_ethXmt2 = 3,
-+	DMACH_pciToMem = 4,
-+	DMACH_memToPci = 5,
-+	DMACH_securityInput = 6,
-+	DMACH_securityOutput = 7,
-+	DMACH_rng = 8, 
-+	
-+	DMACH_count //must be last
-+};
-+
-+
-+typedef struct DMAC_s
-+{
-+	struct DMA_Chan_s ch [DMACH_count] ; //use ch[DMACH_]
-+} volatile *DMA_t ;
-+
-+
-+/*
-+ * External DMA parameters
-+*/
-+
-+enum
-+{
-+	DMADEVCMD_ts_b	= 0,		// ts field in devcmd
-+	DMADEVCMD_ts_m	= 0x00000007,	// ts field in devcmd
-+	DMADEVCMD_ts_byte_v	= 0,
-+	DMADEVCMD_ts_halfword_v	= 1,
-+	DMADEVCMD_ts_word_v	= 2,
-+	DMADEVCMD_ts_2word_v	= 3,
-+	DMADEVCMD_ts_4word_v	= 4,
-+	DMADEVCMD_ts_6word_v	= 5,
-+	DMADEVCMD_ts_8word_v	= 6,
-+	DMADEVCMD_ts_16word_v	= 7
-+};
-+
-+
-+#if 1	// aws - Compatibility.
-+#	define	EXTDMA_ts_b		DMADEVCMD_ts_b
-+#	define	EXTDMA_ts_m		DMADEVCMD_ts_m
-+#	define	EXTDMA_ts_byte_v	DMADEVCMD_ts_byte_v
-+#	define	EXTDMA_ts_halfword_v	DMADEVCMD_ts_halfword_v
-+#	define	EXTDMA_ts_word_v	DMADEVCMD_ts_word_v
-+#	define	EXTDMA_ts_2word_v	DMADEVCMD_ts_2word_v
-+#	define	EXTDMA_ts_4word_v	DMADEVCMD_ts_4word_v
-+#	define	EXTDMA_ts_6word_v	DMADEVCMD_ts_6word_v
-+#	define	EXTDMA_ts_8word_v	DMADEVCMD_ts_8word_v
-+#	define	EXTDMA_ts_16word_v	DMADEVCMD_ts_16word_v
-+#endif	// aws - Compatibility.
-+
-+#endif	// __IDT_RC32365_DMA_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_dma_v.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_dma_v.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_dma_v.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_dma_v.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,86 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   RC32365/336 DMA interface routines.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_RC32365_DMA_V_H__
-+#define __IDT_RC32365_DMA_V_H__
-+
-+
-+#include  <asm/idt-boards/rc32300/rc32300.h>
-+#include  <asm/idt-boards/rc32300/rc32365_dma.h> 
-+#include  <asm/idt-boards/rc32300/rc32365.h>
-+
-+#define DMA_CHAN_OFFSET  0x14
-+#define IS_DMA_USED(X) (((X) & (DMAD_f_m | DMAD_d_m | DMAD_t_m)) != 0)
-+#define IS_DMA_FINISHED(X)   (((X) & (DMAD_f_m)) != 0)
-+#define IS_DMA_DONE(X)   (((X) & (DMAD_d_m)) != 0)
-+
-+#define DMA_COUNT(count)   \
-+  ((count) & DMAD_count_m)
-+
-+#define DMA_HALT_TIMEOUT 500
-+
-+static inline int rc32365_halt_dma(DMA_Chan_t ch)
-+{
-+	int timeout=1;
-+	if (local_readl(&ch->dmac) & DMAC_run_m) {
-+		local_writel(0, &ch->dmac); 
-+		
-+		for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) {
-+			if (local_readl(&ch->dmas) & DMAS_h_m) {
-+				local_writel(0, &ch->dmas);  
-+				break;
-+			}
-+		}
-+
-+	}
-+
-+	return timeout ? 0 : 1;
-+}
-+
-+
-+static inline void rc32365_start_dma(DMA_Chan_t ch, u32 dma_addr)
-+{
-+	local_writel(0, &ch->dmandptr); 
-+	local_writel(dma_addr, &ch->dmadptr);
-+}
-+
-+static inline void rc32365_chain_dma(DMA_Chan_t ch, u32 dma_addr)
-+{
-+	local_writel(dma_addr, &ch->dmandptr);
-+}
-+#endif //__IDT_RC32365_DMA_V_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_eth.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_eth.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_eth.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_eth.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,344 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   RC32365/336 Ethernet hardware abstraction.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef	__IDT_RC32365_ETH_H__
-+#define	__IDT_RC32365_ETH_H__
-+
-+enum
-+{
-+	ETH0_PhysicalAddress	= 0x18058000,
-+	ETH_PhysicalAddress	= ETH0_PhysicalAddress,		// Default
-+	ETH0_VirtualAddress	= 0xb8058000,
-+
-+	ETH_VirtualAddress	= ETH0_VirtualAddress,		// Default
-+
-+	ETH1_PhysicalAddress	= 0x18060000,
-+	ETH1_VirtualAddress	= 0xb8060000,			// Default
-+} ;
-+
-+typedef struct
-+{
-+	u32 ethintfc		;
-+	u32 ethfifott		;
-+	u32 etharc		;
-+	u32 ethhash0		;
-+	u32 ethhash1		;
-+	u32 ethu0 [4]		;	// Reserved.	
-+	u32 ethpfs		;
-+	u32 ethmcp		;
-+	u32 eth_u1 [10]		;	// Reserved.
-+	u32 ethspare		;
-+	u32 eth_u2 [42]		;	// Reserved. 
-+	u32 ethsal0		;
-+	u32 ethsah0		;
-+	u32 ethsal1		;
-+	u32 ethsah1		;
-+	u32 ethsal2		;
-+	u32 ethsah2		;
-+	u32 ethsal3		;
-+	u32 ethsah3		;
-+	u32 ethrbc		;
-+	u32 ethrpc		;
-+	u32 ethrupc		;
-+	u32 ethrfc		;
-+	u32 ethtbc		;
-+	u32 ethgpf		;
-+	u32 eth_u9 [50]		;	// Reserved.	
-+	u32 ethmac1		;
-+	u32 ethmac2		;
-+	u32 ethipgt		;
-+	u32 ethipgr		;
-+	u32 ethclrt		;
-+	u32 ethmaxf		;
-+	u32 eth_u10		;	// Reserved.	
-+	u32 ethmtest		;
-+	u32 miimcfg		;
-+	u32 miimcmd		;
-+	u32 miimaddr		;
-+	u32 miimwtd		;
-+	u32 miimrdd		;
-+	u32 miimind		;
-+	u32 eth_u11		;	// Reserved.
-+	u32 eth_u12		;	// Reserved.
-+	u32 ethcfsa0		;
-+	u32 ethcfsa1		;
-+	u32 ethcfsa2		;
-+} volatile *ETH_t;
-+
-+enum
-+{
-+	ETHINTFC_en_b		= 0,
-+	ETHINTFC_en_m		= 0x00000001,
-+	ETHINTFC_its_b		= 1,
-+	ETHINTFC_its_m		= 0x00000002,
-+	ETHINTFC_rip_b		= 2,
-+	ETHINTFC_rip_m		= 0x00000004,
-+	ETHINTFC_jam_b		= 3,
-+	ETHINTFC_jam_m		= 0x00000008,
-+	ETHINTFC_ovr_b		= 4,
-+	ETHINTFC_ovr_m		= 0x00000010,
-+	ETHINTFC_und_b		= 5,
-+	ETHINTFC_und_m		= 0x00000020,
-+
-+	ETHFIFOTT_tth_b		= 0,
-+	ETHFIFOTT_tth_m		= 0x0000007f,
-+
-+	ETHARC_pro_b		= 0,
-+	ETHARC_pro_m		= 0x00000001,
-+	ETHARC_am_b		= 1,
-+	ETHARC_am_m		= 0x00000002,
-+	ETHARC_afm_b		= 2,
-+	ETHARC_afm_m		= 0x00000004,
-+	ETHARC_ab_b		= 3,
-+	ETHARC_ab_m		= 0x00000008,
-+
-+	ETHSAL_byte5_b		= 0,
-+	ETHSAL_byte5_m		= 0x000000ff,
-+	ETHSAL_byte4_b		= 8,
-+	ETHSAL_byte4_m		= 0x0000ff00,
-+	ETHSAL_byte3_b		= 16,
-+	ETHSAL_byte3_m		= 0x00ff0000,
-+	ETHSAL_byte2_b		= 24,
-+	ETHSAL_byte2_m		= 0xff000000,
-+
-+	ETHSAH_byte1_b		= 0,
-+	ETHSAH_byte1_m		= 0x000000ff,
-+	ETHSAH_byte0_b		= 8,
-+	ETHSAH_byte0_m		= 0x0000ff00,
-+	
-+	ETHGPF_ptv_b		= 0,
-+	ETHGPF_ptv_m		= 0x0000ffff,
-+
-+	ETHPFS_pfd_b		= 0,
-+	ETHPFS_pfd_m		= 0x00000001,
-+
-+	ETHCFSA0_cfsa4_b	= 0,
-+	ETHCFSA0_cfsa4_m	= 0x000000ff,
-+	ETHCFSA0_cfsa5_b	= 8,
-+	ETHCFSA0_cfsa5_m	= 0x0000ff00,
-+
-+	ETHCFSA1_cfsa2_b	= 0,
-+	ETHCFSA1_cfsa2_m	= 0x000000ff,
-+	ETHCFSA1_cfsa3_b	= 8,
-+	ETHCFSA1_cfsa3_m	= 0x0000ff00,
-+
-+	ETHCFSA2_cfsa0_b	= 0,
-+	ETHCFSA2_cfsa0_m	= 0x000000ff,
-+	ETHCFSA2_cfsa1_b	= 8,
-+	ETHCFSA2_cfsa1_m	= 0x0000ff00,
-+
-+	ETHMAC1_re_b		= 0,
-+	ETHMAC1_re_m		= 0x00000001,
-+	ETHMAC1_paf_b		= 1,
-+	ETHMAC1_paf_m		= 0x00000002,
-+	ETHMAC1_rfc_b		= 2,
-+	ETHMAC1_rfc_m		= 0x00000004,
-+	ETHMAC1_tfc_b		= 3,
-+	ETHMAC1_tfc_m		= 0x00000008,
-+	ETHMAC1_lb_b		= 4,
-+	ETHMAC1_lb_m		= 0x00000010,
-+	ETHMAC1_mr_b		= 31,
-+	ETHMAC1_mr_m		= 0x80000000,
-+
-+	ETHMAC2_fd_b		= 0,
-+	ETHMAC2_fd_m		= 0x00000001,
-+	ETHMAC2_flc_b		= 1,
-+	ETHMAC2_flc_m		= 0x00000002,
-+	ETHMAC2_hfe_b		= 2,
-+	ETHMAC2_hfe_m		= 0x00000004,
-+	ETHMAC2_dc_b		= 3,
-+	ETHMAC2_dc_m		= 0x00000008,
-+	ETHMAC2_cen_b		= 4,
-+	ETHMAC2_cen_m		= 0x00000010,
-+	ETHMAC2_pe_b		= 5,
-+	ETHMAC2_pe_m		= 0x00000020,
-+	ETHMAC2_vpe_b		= 6,
-+	ETHMAC2_vpe_m		= 0x00000040,
-+	ETHMAC2_ape_b		= 7,
-+	ETHMAC2_ape_m		= 0x00000080,
-+	ETHMAC2_ppe_b		= 8,
-+	ETHMAC2_ppe_m		= 0x00000100,
-+	ETHMAC2_lpe_b		= 9,
-+	ETHMAC2_lpe_m		= 0x00000200,
-+	ETHMAC2_nb_b		= 12,
-+	ETHMAC2_nb_m		= 0x00001000,
-+	ETHMAC2_bp_b		= 13,
-+	ETHMAC2_bp_m		= 0x00002000,
-+	ETHMAC2_ed_b		= 14,
-+	ETHMAC2_ed_m		= 0x00004000,
-+
-+	ETHIPGT_ipgt_b		= 0,
-+	ETHIPGT_ipgt_m		= 0x0000007f,
-+
-+	ETHIPGR_ipgr2_b		= 0,
-+	ETHIPGR_ipgr2_m		= 0x0000007f,
-+	ETHIPGR_ipgr1_b		= 8,
-+	ETHIPGR_ipgr1_m		= 0x00007f00,
-+
-+	ETHCLRT_maxret_b	= 0,
-+	ETHCLRT_maxret_m	= 0x0000000f,
-+	ETHCLRT_colwin_b	= 8,
-+	ETHCLRT_colwin_m	= 0x00003f00,
-+
-+	ETHMAXF_maxf_b		= 0,
-+	ETHMAXF_maxf_m		= 0x0000ffff,
-+
-+	ETHMTEST_tb_b		= 2,
-+	ETHMTEST_tb_m		= 0x00000004,
-+
-+	ETHMCP_div_b		= 0,
-+	ETHMCP_div_m		= 0x000000ff,
-+	
-+	MIIMCFG_rsv_b		= 0,
-+	MIIMCFG_rsv_m		= 0x0000000c,
-+
-+	MIIMCMD_rd_b		= 0,
-+	MIIMCMD_rd_m		= 0x00000001,
-+	MIIMCMD_scn_b		= 1,
-+	MIIMCMD_scn_m		= 0x00000002,
-+
-+	MIIMADDR_regaddr_b	= 0,
-+	MIIMADDR_regaddr_m	= 0x0000001f,
-+	MIIMADDR_phyaddr_b	= 8,
-+	MIIMADDR_phyaddr_m	= 0x00001f00,
-+
-+	MIIMWTD_wdata_b		= 0,
-+	MIIMWTD_wdata_m		= 0x0000ffff,
-+
-+	MIIMRDD_rdata_b		= 0,
-+	MIIMRDD_rdata_m		= 0x0000ffff,
-+
-+	MIIMIND_bsy_b		= 0,
-+	MIIMIND_bsy_m		= 0x00000001,
-+	MIIMIND_scn_b		= 1,
-+	MIIMIND_scn_m		= 0x00000002,
-+	MIIMIND_nv_b		= 2,
-+	MIIMIND_nv_m		= 0x00000004,
-+
-+} ;
-+
-+/*
-+ * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors.
-+ */
-+enum
-+{
-+	ETHRX_fd_b		= 0,
-+	ETHRX_fd_m		= 0x00000001,
-+	ETHRX_ld_b		= 1,
-+	ETHRX_ld_m		= 0x00000002,
-+	ETHRX_rok_b		= 2,
-+	ETHRX_rok_m		= 0x00000004,
-+	ETHRX_fm_b		= 3,
-+	ETHRX_fm_m		= 0x00000008,
-+	ETHRX_mp_b		= 4,
-+	ETHRX_mp_m		= 0x00000010,
-+	ETHRX_bp_b		= 5,
-+	ETHRX_bp_m		= 0x00000020,
-+	ETHRX_vlt_b		= 6,
-+	ETHRX_vlt_m		= 0x00000040,
-+	ETHRX_cf_b		= 7,
-+	ETHRX_cf_m		= 0x00000080,
-+	ETHRX_ovr_b		= 8,
-+	ETHRX_ovr_m		= 0x00000100,
-+	ETHRX_crc_b		= 9,
-+	ETHRX_crc_m		= 0x00000200,
-+	ETHRX_cv_b		= 10,
-+	ETHRX_cv_m		= 0x00000400,
-+	ETHRX_db_b		= 11,
-+	ETHRX_db_m		= 0x00000800,
-+	ETHRX_le_b		= 12,
-+	ETHRX_le_m		= 0x00001000,
-+	ETHRX_lor_b		= 13,
-+	ETHRX_lor_m		= 0x00002000,
-+	ETHRX_ces_b		= 14,
-+	ETHRX_ces_m		= 0x00004000,
-+	ETHRX_length_b		= 16,
-+	ETHRX_length_m		= 0xffff0000,
-+
-+	ETHTX_fd_b		= 0,
-+	ETHTX_fd_m		= 0x00000001,
-+	ETHTX_ld_b		= 1,
-+	ETHTX_ld_m		= 0x00000002,
-+	ETHTX_oen_b		= 2,
-+	ETHTX_oen_m		= 0x00000004,
-+	ETHTX_pen_b		= 3,
-+	ETHTX_pen_m		= 0x00000008,
-+	ETHTX_cen_b		= 4,
-+	ETHTX_cen_m		= 0x00000010,
-+	ETHTX_hen_b		= 5,
-+	ETHTX_hen_m		= 0x00000020,
-+	ETHTX_tok_b		= 6,
-+	ETHTX_tok_m		= 0x00000040,
-+	ETHTX_mp_b		= 7,
-+	ETHTX_mp_m		= 0x00000080,
-+	ETHTX_bp_b		= 8,
-+	ETHTX_bp_m		= 0x00000100,
-+	ETHTX_und_b		= 9,
-+	ETHTX_und_m		= 0x00000200,
-+	ETHTX_of_b		= 10,
-+	ETHTX_of_m		= 0x00000400,
-+	ETHTX_ed_b		= 11,
-+	ETHTX_ed_m		= 0x00000800,
-+	ETHTX_ec_b		= 12,
-+	ETHTX_ec_m		= 0x00001000,
-+	ETHTX_lc_b		= 13,
-+	ETHTX_lc_m		= 0x00002000,
-+	ETHTX_td_b		= 14,
-+	ETHTX_td_m		= 0x00004000,
-+	ETHTX_crc_b		= 15,
-+	ETHTX_crc_m		= 0x00008000,
-+	ETHTX_le_b		= 16,
-+	ETHTX_le_m		= 0x00010000,
-+	ETHTX_cc_b		= 17,
-+	ETHTX_cc_m		= 0x001E0000,
-+} ;
-+
-+enum
-+{
-+	ETH0_IPABMC_PhysicalAddress	= 0x18040010,
-+	ETH0_IPABMC_VirtualAddress	= 0xb8040000,
-+	ETH1_IPABMC_PhysicalAddress	= 0x18040018,
-+	ETH1_IPABMC_VirtualAddress	= 0xb8040018,
-+} ;
-+
-+typedef struct
-+{
-+	u32 ipabmcrx		;
-+	u32 ipabmctx		;
-+}volatile *IPABM_ETH_t;
-+#endif //__IDT_RC32365_ETH_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_eth_v.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_eth_v.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_eth_v.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_eth_v.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,72 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   RC32365/336 Ethernet status checking.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_RC32365_ETH_V_H__
-+#define __IDT_RC32365_ETH_V_H__
-+#include  <asm/idt-boards/rc32300/rc32365_eth.h> 
-+
-+#define IS_TX_TOK(X)         (((X) & (1<<ETHTX_tok_b)) >> ETHTX_tok_b )   /* Transmit Okay    */
-+#define IS_TX_MP(X)          (((X) & (1<<ETHTX_mp_b))  >> ETHTX_mp_b )    /* Multicast        */
-+#define IS_TX_BP(X)          (((X) & (1<<ETHTX_bp_b))  >> ETHTX_bp_b )    /* Broadcast        */
-+#define IS_TX_UND_ERR(X)     (((X) & (1<<ETHTX_und_b)) >> ETHTX_und_b )   /* Transmit FIFO Underflow */
-+#define IS_TX_OF_ERR(X)      (((X) & (1<<ETHTX_of_b))  >> ETHTX_of_b )    /* Oversized frame  */
-+#define IS_TX_ED_ERR(X)      (((X) & (1<<ETHTX_ed_b))  >> ETHTX_ed_b )    /* Excessive deferral  */
-+#define IS_TX_EC_ERR(X)      (((X) & (1<<ETHTX_ec_b))  >> ETHTX_ec_b)     /* Excessive collisions  */
-+#define IS_TX_LC_ERR(X)      (((X) & (1<<ETHTX_lc_b))  >> ETHTX_lc_b )    /* Late Collision   */
-+#define IS_TX_TD_ERR(X)      (((X) & (1<<ETHTX_td_b))  >> ETHTX_td_b )    /* Transmit deferred*/
-+#define IS_TX_CRC_ERR(X)     (((X) & (1<<ETHTX_crc_b)) >> ETHTX_crc_b )   /* CRC Error        */
-+#define IS_TX_LE_ERR(X)      (((X) & (1<<ETHTX_le_b))  >>  ETHTX_le_b )    /* Length Error     */
-+
-+#define TX_COLLISION_COUNT(X) (((X) & ETHTX_cc_m)>>ETHTX_cc_b)  /* Collision Count  */
-+
-+#define IS_RCV_ROK(X)        (((X) & (1<<ETHRX_rok_b)) >> ETHRX_rok_b)    /* Receive Okay     */
-+#define IS_RCV_FM(X)         (((X) & (1<<ETHRX_fm_b))  >> ETHRX_fm_b)     /* Is Filter Match  */
-+#define IS_RCV_MP(X)         (((X) & (1<<ETHRX_mp_b))  >> ETHRX_mp_b)     /* Is it MP         */
-+#define IS_RCV_BP(X)         (((X) & (1<<ETHRX_bp_b))  >> ETHRX_bp_b)     /* Is it BP         */
-+#define IS_RCV_VLT(X)        (((X) & (1<<ETHRX_vlt_b)) >> ETHRX_vlt_b)    /* VLAN Tag Detect  */
-+#define IS_RCV_CF(X)         (((X) & (1<<ETHRX_cf_b))  >> ETHRX_cf_b)     /* Control Frame    */
-+#define IS_RCV_OVR_ERR(X)    (((X) & (1<<ETHRX_ovr_b)) >> ETHRX_ovr_b)    /* Receive Overflow */
-+#define IS_RCV_CRC_ERR(X)    (((X) & (1<<ETHRX_crc_b)) >> ETHRX_crc_b)    /* CRC Error        */
-+#define IS_RCV_CV_ERR(X)     (((X) & (1<<ETHRX_cv_b))  >> ETHRX_cv_b)     /* Code Violation   */
-+#define IS_RCV_DB_ERR(X)     (((X) & (1<<ETHRX_db_b))  >> ETHRX_db_b)     /* Dribble Bits     */
-+#define IS_RCV_LE_ERR(X)     (((X) & (1<<ETHRX_le_b))  >> ETHRX_le_b)     /* Length error     */
-+#define IS_RCV_LOR_ERR(X)    (((X) & (1<<ETHRX_lor_b)) >> ETHRX_lor_b)    /* Length Out of Range */
-+#define IS_RCV_CES_ERR(X)    (((X) & (1<<ETHRX_ces_b)) >> ETHRX_ces_b)  /* Preamble error   */
-+#define RCVPKT_LENGTH(X)     (((X) & ETHRX_length_m) >> ETHRX_length_b)   /* Length of the received packet */
-+
-+#endif //__IDT_RC32365_ETH_V_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_gpio.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_gpio.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_gpio.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_gpio.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,181 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   RC32365/336 GPIO hardware abstraction.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef	__IDT_RC32365_GPIO_H__
-+#define	__IDT_RC32365_GPIO_H__
-+
-+enum
-+{
-+	GPIO0_PhysicalAddress	= 0x18048000,
-+	GPIO_PhysicalAddress	= GPIO0_PhysicalAddress,	// Default
-+	
-+	GPIO0_VirtualAddress	= 0xb8048000,
-+	GPIO_VirtualAddress	= GPIO0_VirtualAddress,		// Default
-+} ;
-+
-+typedef struct
-+{
-+	u32   gpiofunc;   /* GPIO Function Register
-+			   * gpiofunc[x]==0 bit = gpio
-+			   * func[x]==1  bit = altfunc
-+			   */
-+	u32   gpiocfg;    /* GPIO Configuration Register
-+			   * gpiocfg[x]==0 bit = input
-+			   * gpiocfg[x]==1 bit = output
-+			   */
-+	u32   gpiod;	    /* GPIO Data Register
-+			     * gpiod[x] read/write gpio pinX status
-+			     */
-+	u32   gpioilevel; /* GPIO Interrupt Status Register
-+			   * interrupt level (see gpioistat)
-+			   */
-+	u32   gpioistat;  /* Gpio Interrupt Status Register
-+			   * istat[x] = (gpiod[x] == level[x])
-+			   * cleared in ISR (STICKY bits)
-+			   */
-+	u32   gpionmien;  /* GPIO Non-maskable Interrupt Enable Register */
-+} volatile * GPIO_t ;
-+
-+typedef enum
-+{
-+	GPIO_gpio_v	    = 0,		// gpiofunc use pin as GPIO.
-+	GPIO_alt_v	    = 1,		// gpiofunc use pin as alt.
-+	GPIO_input_v	    = 0,		// gpiocfg use pin as input.
-+	GPIO_output_v	    = 1,		// gpiocfg use pin as output.
-+	GPIO_pin0_b	    = 0,
-+	GPIO_pin0_m	    = 0x00000001,
-+	GPIO_pin1_b	    = 1,
-+	GPIO_pin1_m	    = 0x00000002,
-+	GPIO_pin2_b	    = 2,
-+	GPIO_pin2_m	    = 0x00000004,
-+	GPIO_pin3_b	    = 3,
-+	GPIO_pin3_m	    = 0x00000008,
-+	GPIO_pin4_b	    = 4,
-+	GPIO_pin4_m	    = 0x00000010,
-+	GPIO_pin5_b	    = 5,
-+	GPIO_pin5_m	    = 0x00000020,
-+	GPIO_pin6_b	    = 6,
-+	GPIO_pin6_m	    = 0x00000040,
-+	GPIO_pin7_b	    = 7,
-+	GPIO_pin7_m	    = 0x00000080,
-+	GPIO_pin8_b	    = 8,
-+	GPIO_pin8_m	    = 0x00000100,
-+	GPIO_pin9_b	    = 9,
-+	GPIO_pin9_m	    = 0x00000200,
-+	GPIO_pin10_b	    = 10,
-+	GPIO_pin10_m	    = 0x00000400,
-+	GPIO_pin11_b	    = 11,
-+	GPIO_pin11_m	    = 0x00000800,
-+	GPIO_pin12_b	    = 12,
-+	GPIO_pin12_m	    = 0x00001000,
-+	GPIO_pin13_b	    = 13,
-+	GPIO_pin13_m	    = 0x00002000,
-+	GPIO_pin14_b	    = 14,
-+	GPIO_pin14_m	    = 0x00004000,
-+	GPIO_pin15_b	    = 15,
-+	GPIO_pin15_m	    = 0x00008000,
-+	
-+// Alternate function pins.  Corrsponding gpiofunc bit set to GPIO_alt_v.
-+	
-+	GPIO_u0sout_b	    = GPIO_pin0_b,		// UART 0 serial out.
-+	GPIO_u0sout_m	    = GPIO_pin0_m,
-+	GPIO_u0sout_cfg_v   = GPIO_output_v,
-+	
-+	GPIO_u0sinp_b	    = GPIO_pin1_b,			// UART 0 serial in.
-+	GPIO_u0sinp_m	    = GPIO_pin1_m,
-+	GPIO_u0sinp_cfg_v   = GPIO_input_v,
-+	
-+	GPIO_maddr22_b	    = GPIO_pin2_b, 	// M&P bus bit 22.
-+	GPIO_maddr22_m	    = GPIO_pin2_m,
-+	GPIO_maddr22_cfg_v  = GPIO_output_v,
-+	
-+	GPIO_maddr23_b	    = GPIO_pin3_b, 	// M&P bus bit 23.
-+	GPIO_maddr23_m	    = GPIO_pin3_m,
-+	GPIO_maddr23_cfg_v  = GPIO_output_v,
-+	
-+	GPIO_maddr24_b	    = GPIO_pin4_b, 	// M&P bus bit 24.
-+	GPIO_maddr24_m	    = GPIO_pin4_m,
-+	GPIO_maddr24_cfg_v  = GPIO_output_v,
-+	
-+	GPIO_maddr25_b	    = GPIO_pin5_b, 	// M&P bus bit 25.
-+	GPIO_maddr25_m	    = GPIO_pin5_m,
-+	GPIO_maddr25_cfg_v  = GPIO_output_v,
-+	
-+	GPIO_rngclk_b 	    = GPIO_pin6_b, 	// reserved.
-+	GPIO_rngclk_m 	    = GPIO_pin6_m,
-+	GPIO_rngclk_cfg_v   = GPIO_input_v,
-+
-+	GPIO_sdckenp_b 	    = GPIO_pin7_b, 	// reserved.
-+	GPIO_sdckenp_m 	    = GPIO_pin7_m,
-+	GPIO_sdckenp_cfg_v  = GPIO_output_v,
-+
-+	GPIO_cen1_b 	    = GPIO_pin8_b, 	// reserved.
-+	GPIO_cen1_m 	    = GPIO_pin8_m,
-+	GPIO_cen1_cfg_v	    = GPIO_output_v,
-+
-+	GPIO_cen2_b 	    = GPIO_pin9_b, 	// reserved.
-+	GPIO_cen2_m 	    = GPIO_pin9_m,
-+	GPIO_cen2_cfg_v	    = GPIO_output_v,
-+	
-+	GPIO_regn_b 	    = GPIO_pin10_b, 	// reserved.
-+	GPIO_regn_m 	    = GPIO_pin10_m,
-+	GPIO_regn_cfg_v	    = GPIO_output_v,
-+	
-+	GPIO_iordn_b 	    = GPIO_pin11_b, 	// reserved.
-+	GPIO_iordn_m 	    = GPIO_pin11_m,
-+	GPIO_iordn_cfg_v    = GPIO_output_v,
-+	
-+	GPIO_iowrn_b 	    = GPIO_pin12_b, 	// reserved.
-+	GPIO_iowrn_m 	    = GPIO_pin12_m,
-+	GPIO_iowrn_cfg_v    = GPIO_output_v,
-+    
-+	GPIO_pcireqn2_b	    = GPIO_pin13_b, 	// PCI messaging int.
-+	GPIO_pcireqn2_m	    = GPIO_pin13_m,
-+	GPIO_pcireqn2_cfg_v = GPIO_input_v,
-+	
-+	GPIO_pcigntn2_b	    = GPIO_pin14_b, 	// PCI messaging int.
-+	GPIO_pcigntn2_m	    = GPIO_pin14_m,
-+	GPIO_pcigntn2_cfg_v = GPIO_output_v,
-+	
-+	GPIO_pcimuintn_b    = GPIO_pin15_b, 	// PCI messaging int.
-+	GPIO_pcimuintn_m    = GPIO_pin15_m,
-+	GPIO_pcimuintn_cfg_v= GPIO_output_v,
-+	
-+} GPIO_DEFS_t;
-+
-+#endif //__IDT_RC32365_GPIO_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_gpio_v.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_gpio_v.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_gpio_v.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_gpio_v.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,91 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Routines to set/clear/toggle GPIO on RC32365
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+#ifndef	__IDT_RC32365_GPIO_V_H__
-+#define	__IDT_RC32365_GPIO_V_H__
-+
-+
-+#ifdef _LANGUAGE_ASSEMBLY
-+#define SET_GPIO(pin) \
-+	lui t5,0xb804 ; \
-+	ori t5,t5,0x8000 ; \
-+	lw  t4,8(t5) ; \
-+	ori t4,t4,pin ; \
-+	sw  t4,8(t5) ;
-+
-+#define CLEAR_GPIO(pin) \
-+	lui t5,0xb804 ; \
-+	ori t5,t5,0x8000 ; \
-+	lw  t4,8(t5) ; \
-+        lui t6,0xFFFF; \
-+        ori t6,t6,0xFFFF; \
-+	xori t6,t6,pin ; \
-+        and  t4,t6 ; \
-+	sw  t4,8(t5) ;
-+
-+#define TOGGLE_GPIO(pin) \
-+	lui t5,0xb804 ; \
-+	ori t5,t5,0x8000 ; \
-+	lw  t4,8(t5) ; \
-+	xori t4,t4,pin ; \
-+	sw  t4,8(t5) ;
-+
-+#else // !_LANGUAGE_ASSEMBLY 
-+#include  <asm/rc32300/types.h> 
-+#include  <asm/rc32300/rc32365_gpio.h> 
-+#include  <asm/rc32300/rc32365.h>
-+
-+static inline void set_gpio(unsigned long pin)
-+{
-+  idt_gpio->gpiod |= pin;
-+}
-+ 
-+static inline void clear_gpio(unsigned long pin)
-+{
-+  idt_gpio->gpiod &= ~pin;
-+}
-+static inline void toggle_gpio(unsigned long pin)
-+{
-+  idt_gpio->gpiod ^= pin;
-+}
-+#define SET_GPIO(pin) set_gpio(pin)
-+#define CLEAR_GPIO(pin) clear_gpio(pin)
-+#define TOGGLE_GPIO(pin) toggle_gpio(pin)
-+#endif // _LANGUAGE_ASSEMBLY 
-+
-+#endif //__IDT_RC32365_GPIO_V_H__
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,160 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Definitions for IDT RC32365 CPU.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_RC32365_H__
-+#define __IDT_RC32365_H__
-+
-+extern unsigned int cedar_za;
-+
-+/* Base address of internal registers */
-+#define RC32365_REG_BASE   0x18000000
-+
-+/* System ID Registers */
-+#define CPU_SYSID          (RC32365_REG_BASE + 0x00018)
-+#define CPU_DEVTYPE        (RC32365_REG_BASE + 0x0001c)
-+
-+/* Reset Controller */
-+#define RESET_CNTL         (RC32365_REG_BASE + 0x08000)
-+#define BOOT_VECTOR        (RC32365_REG_BASE + 0x08004)
-+
-+/* Device Controller */
-+#define DEV0_BASE          (RC32365_REG_BASE + 0x10000)
-+#define DEV0_MASK          (RC32365_REG_BASE + 0x10004)
-+#define DEV0_CNTL          (RC32365_REG_BASE + 0x10008)
-+#define DEV0_TIMING        (RC32365_REG_BASE + 0x1000c)
-+#define DEV_REG_OFFSET     0x10
-+
-+/* SDRAM Controller */
-+#define SDRAM0_BASE        (RC32365_REG_BASE + 0x18000)
-+#define SDRAM0_MASK        (RC32365_REG_BASE + 0x18004)
-+#define SDRAM1_BASE        (RC32365_REG_BASE + 0x18008)
-+#define SDRAM1_MASK        (RC32365_REG_BASE + 0x1800c)
-+#define SDRAM_CNTL         (RC32365_REG_BASE + 0x18010)
-+
-+/* Counters/Timers */
-+#define TIMER0_COUNT       (RC32365_REG_BASE + 0x20000)
-+#define TIMER0_COMPARE     (RC32365_REG_BASE + 0x20004)
-+#define TIMER0_CNTL        (RC32365_REG_BASE + 0x20008)
-+#define TIMER0_SELECT      (RC32365_REG_BASE + 0x2000c)
-+#define TIMER_REG_OFFSET   0x10
-+
-+/* System Integrity */
-+
-+/* Interrupt Controller */
-+#define IC_GROUP0_PEND     (RC32365_REG_BASE + 0x30000)
-+#define IC_GROUP0_TEST     (RC32365_REG_BASE + 0x30004)
-+#define IC_GROUP0_MASK     (RC32365_REG_BASE + 0x30008)
-+#define IC_GROUP_OFFSET    0x0c
-+
-+#define NUM_INTR_GROUPS    5
-+/*
-+ * The IRQ mapping is as follows:
-+ *
-+ *    IRQ         Mapped To
-+ *    ---     -------------------
-+ *     0      SW0  (IP0) SW0 intr
-+ *     1      SW1  (IP1) SW1 intr
-+ *     -      Int0 (IP2) mapped to GROUP0_IRQ_BASE
-+ *     -      Int1 (IP3) mapped to GROUP1_IRQ_BASE
-+ *     -      Int2 (IP4) mapped to GROUP2_IRQ_BASE
-+ *     -      Int3 (IP5) mapped to GROUP3_IRQ_BASE
-+ *     -      Int4 (IP6) mapped to GROUP4_IRQ_BASE
-+ *     7      Int5 (IP7) CP0 Timer
-+ *
-+ * IRQ's 8 and up are all mapped to Int0-4 (IP2-IP6), which
-+ * internally on the RC32365 is routed to the Expansion
-+ * Interrupt Controller.
-+ */
-+#define MIPS_CPU_TIMER_IRQ 7
-+
-+#define GROUP0_IRQ_BASE  8                      // Counter/Timers, UCW
-+#define GROUP1_IRQ_BASE  (GROUP0_IRQ_BASE + 32) // DMA
-+#define GROUP2_IRQ_BASE  (GROUP1_IRQ_BASE + 32) // RNG, SEC
-+#define GROUP3_IRQ_BASE  (GROUP2_IRQ_BASE + 32) // Eth, PCI, UARTs
-+#define GROUP4_IRQ_BASE  (GROUP3_IRQ_BASE + 32) // GPIO
-+
-+#define RC32365_NR_IRQS  (GROUP4_IRQ_BASE + 32)
-+
-+/* DMA - see rc32365_dma.h for full list of registers */
-+
-+#define RC32365_DMA_BASE (RC32365_REG_BASE + 0x38000)
-+#define DMA_CHAN_OFFSET  0x14
-+
-+/* GPIO Controller */
-+#define idt_gpio              ((volatile GPIO_t) GPIO0_VirtualAddress)
-+
-+/* 16550 UARTs */
-+#ifdef __MIPSEB__
-+#define RC32300_UART0_BASE (RC32365_REG_BASE + 0x50003)
-+#else
-+#define RC32300_UART0_BASE (RC32365_REG_BASE + 0x50000)
-+#endif
-+#define RC32300_UART0_IRQ  (GROUP3_IRQ_BASE + 0)
-+
-+/* Ethernet - see rc32365_eth.h for full list of registers */
-+
-+#define RC32365_ETH_BASE   (RC32365_REG_BASE + 0x58000)
-+
-+#define IDT_CLOCK_MULT     2
-+
-+/* FLASH (device 1) */
-+#define FLASH_BASE         0x08000000
-+#define FLASH_SIZE         0x00800000
-+
-+/* LCD 4-digit display (device 2) */
-+#define LCD_DIGIT0         0x0C000003
-+#define LCD_DIGIT1         0x0C000002
-+#define LCD_DIGIT2         0x0C000001
-+#define LCD_DIGIT3         0x0C000000
-+
-+/* RTC (DS1553) (device 2) */
-+#define RTC_BASE           0x0c800000
-+/* NVRAM */
-+#define NVRAM_BASE         RTC_BASE
-+#define NVRAM_ENVSIZE_OFF  4
-+#define NVRAM_ENVSTART_OFF 32
-+
-+/* Interrupts routed on 79EB365 board */
-+#define RC32365_PCI_INTA_IRQ (GROUP4_IRQ_BASE +  8)
-+#define RC32365_PCI_INTB_IRQ (GROUP4_IRQ_BASE +  9)
-+#define RC32365_PCI_INTC_IRQ (GROUP4_IRQ_BASE + 10)
-+#define RC32365_PCI_INTD_IRQ (GROUP4_IRQ_BASE + 11)
-+
-+#define RAM_SIZE	   (32 * 1024 * 1024)
-+
-+#endif //__IDT_RC32365_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_pci.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_pci.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_pci.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_pci.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,515 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Datatype declaration for IDT 79EB365/336 PCI
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_RC32365_PCI_H__
-+#define __IDT_RC32365_PCI_H__
-+
-+enum
-+{
-+	PCI0_PhysicalAddress	= 0x18068000,
-+	PCI_PhysicalAddress	= PCI0_PhysicalAddress,
-+	
-+	PCI0_VirtualAddress	= 0xb8068000,
-+	PCI_VirtualAddress	= PCI0_VirtualAddress,
-+} ;
-+
-+enum
-+{
-+	PCI_LbaCount	= 4,		// Local base addresses.
-+} ;
-+
-+typedef struct
-+{
-+	u32	a ;		// Address.
-+	u32	c ;		// Control.
-+	u32	m ;		// mapping.
-+} PCI_Map_s ;
-+
-+typedef struct
-+{
-+	u32		pcic ;
-+	u32		pcis ;
-+	u32		pcism ;
-+	u32		pcicfga ;
-+	u32		pcicfgd ;
-+	PCI_Map_s	pcilba [PCI_LbaCount] ;
-+	u32		pcidac ;
-+	u32		pcidas ;
-+	u32		pcidasm ;
-+	u32		pcidad ;
-+	u32		pcidma8c ;
-+	u32		pcidma9c ;
-+	u32		pcitc ;
-+} volatile *PCI_t ;
-+
-+// PCI messaging unit.
-+enum
-+{
-+	PCIM_Count	= 2,
-+} ;
-+typedef struct
-+{
-+	u32		pciim [PCIM_Count] ;
-+	u32		pciom [PCIM_Count] ;
-+	u32		pciid ;
-+	u32		pciiic ;
-+	u32		pciiim ;
-+	u32		pciiod ;
-+	u32		pciioic ;
-+	u32		pciioim ;
-+} volatile *PCIM_t ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Control Register
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCIC_en_b	= 0,
-+	PCIC_en_m	= 0x00000001,
-+	PCIC_tnr_b	= 1,
-+	PCIC_tnr_m	= 0x00000002,
-+	PCIC_sce_b	= 2,
-+	PCIC_sce_m	= 0x00000004,
-+	PCIC_ien_b	= 3,
-+	PCIC_ien_m	= 0x00000008,
-+	PCIC_aaa_b	= 4,
-+	PCIC_aaa_m	= 0x00000010,
-+	PCIC_eap_b	= 5,
-+	PCIC_eap_m	= 0x00000020,
-+	PCIC_pcim_b	= 6,
-+	PCIC_pcim_m	= 0x000001c0,
-+		PCIC_pcim_disabled_v	= 0,
-+		PCIC_pcim_tnr_v 	= 1,	// Satellite - target not ready
-+		PCIC_pcim_suspend_v	= 2,	// Satellite - suspended CPU.
-+		PCIC_pcim_extern_v	= 3,	// Host - external arbiter.
-+		PCIC_pcim_fixed_v	= 4,	// Host - fixed priority arb.
-+		PCIC_pcim_roundrobin_v	= 5,	// Host - round robin priority.
-+		PCIC_pcim_reserved6_v	= 6,
-+		PCIC_pcim_reserved7_v	= 7,
-+	PCIC_igm_b	= 9,
-+	PCIC_igm_m	= 0x00000200,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Status Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCIS_eed_b	= 0,
-+	PCIS_eed_m	= 0x00000001,
-+	PCIS_wr_b	= 1,
-+	PCIS_wr_m	= 0x00000002,
-+	PCIS_nmi_b	= 2,
-+	PCIS_nmi_m	= 0x00000004,
-+	PCIS_ii_b	= 3,
-+	PCIS_ii_m	= 0x00000008,
-+	PCIS_cwe_b	= 4,
-+	PCIS_cwe_m	= 0x00000010,
-+	PCIS_cre_b	= 5,
-+	PCIS_cre_m	= 0x00000020,
-+	PCIS_mdpe_b	= 6,
-+	PCIS_mdpe_m	= 0x00000040,
-+	PCIS_sta_b	= 7,
-+	PCIS_sta_m	= 0x00000080,
-+	PCIS_rta_b	= 8,
-+	PCIS_rta_m	= 0x00000100,
-+	PCIS_rma_b	= 9,
-+	PCIS_rma_m	= 0x00000200,
-+	PCIS_sse_b	= 10,
-+	PCIS_sse_m	= 0x00000400,
-+	PCIS_ose_b	= 11,
-+	PCIS_ose_m	= 0x00000800,
-+	PCIS_pe_b	= 12,
-+	PCIS_pe_m	= 0x00001000,
-+	PCIS_tae_b	= 13,
-+	PCIS_tae_m	= 0x00002000,
-+	PCIS_rle_b	= 14,
-+	PCIS_rle_m	= 0x00004000,
-+	PCIS_bme_b	= 15,
-+	PCIS_bme_m	= 0x00008000,
-+	PCIS_prd_b	= 16,
-+	PCIS_prd_m	= 0x00010000,
-+	PCIS_rip_b	= 17,
-+	PCIS_rip_m	= 0x00020000,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Status Mask Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCISM_eed_b		= 0,
-+	PCISM_eed_m		= 0x00000001,
-+	PCISM_wr_b		= 1,
-+	PCISM_wr_m		= 0x00000002,
-+	PCISM_nmi_b		= 2,
-+	PCISM_nmi_m		= 0x00000004,
-+	PCISM_ii_b		= 3,
-+	PCISM_ii_m		= 0x00000008,
-+	PCISM_cwe_b		= 4,
-+	PCISM_cwe_m		= 0x00000010,
-+	PCISM_cre_b		= 5,
-+	PCISM_cre_m		= 0x00000020,
-+	PCISM_mdpe_b		= 6,
-+	PCISM_mdpe_m		= 0x00000040,
-+	PCISM_sta_b		= 7,
-+	PCISM_sta_m		= 0x00000080,
-+	PCISM_rta_b		= 8,
-+	PCISM_rta_m		= 0x00000100,
-+	PCISM_rma_b		= 9,
-+	PCISM_rma_m		= 0x00000200,
-+	PCISM_sse_b		= 10,
-+	PCISM_sse_m		= 0x00000400,
-+	PCISM_ose_b		= 11,
-+	PCISM_ose_m		= 0x00000800,
-+	PCISM_pe_b		= 12,
-+	PCISM_pe_m		= 0x00001000,
-+	PCISM_tae_b		= 13,
-+	PCISM_tae_m		= 0x00002000,
-+	PCISM_rle_b		= 14,
-+	PCISM_rle_m		= 0x00004000,
-+	PCISM_bme_b		= 15,
-+	PCISM_bme_m		= 0x00008000,
-+	PCISM_prd_b		= 16,
-+	PCISM_prd_m		= 0x00010000,
-+	PCISM_rip_b		= 17,
-+	PCISM_rip_m		= 0x00020000,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Configuration Address Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCICFGA_reg_b		= 2,
-+	PCICFGA_reg_m		= 0x000000fc,
-+	PCICFGA_reg_id_v	= 0x00>>2, //use PCFGID_
-+	PCICFGA_reg_04_v	= 0x04>>2, //use PCFG04_
-+	PCICFGA_reg_08_v	= 0x08>>2, //use PCFG08_
-+	PCICFGA_reg_0C_v	= 0x0C>>2, //use PCFG0C_
-+	PCICFGA_reg_pba0_v	= 0x10>>2, //use PCIPBA_
-+	PCICFGA_reg_pba1_v	= 0x14>>2, //use PCIPBA_
-+	PCICFGA_reg_pba2_v	= 0x18>>2, //use PCIPBA_
-+	PCICFGA_reg_pba3_v	= 0x1c>>2, //use PCIPBA_
-+	PCICFGA_reg_subsystem_v = 0x2c>>2, //use PCFGSS_
-+	PCICFGA_reg_3C_v	= 0x3C>>2, //use PCFG3C_
-+	PCICFGA_reg_pba0c_v	= 0x44>>2, //use PCIPBAC_
-+	PCICFGA_reg_pba0m_v	= 0x48>>2,
-+	PCICFGA_reg_pba1c_v	= 0x4c>>2, //use PCIPBAC_
-+	PCICFGA_reg_pba1m_v	= 0x50>>2,
-+	PCICFGA_reg_pba2c_v	= 0x54>>2, //use PCIPBAC_
-+	PCICFGA_reg_pba2m_v	= 0x58>>2,
-+	PCICFGA_reg_pba3c_v	= 0x5c>>2, //use PCIPBAC_
-+	PCICFGA_reg_pba3m_v	= 0x60>>2,
-+	PCICFGA_reg_pmgt_v	= 0x64>>2,
-+	PCICFGA_func_b		= 8,
-+	PCICFGA_func_m		= 0x00000700,
-+	PCICFGA_dev_b		= 11,
-+	PCICFGA_dev_m		= 0x0000f800,
-+	PCICFGA_dev_internal_v	= 0,
-+	PCICFGA_bus_b		= 16,
-+	PCICFGA_bus_m		= 0x00ff0000,
-+	PCICFGA_bus_type0_v	= 0,	//local bus
-+	PCICFGA_en_b		= 31,		// read only
-+	PCICFGA_en_m		= 0x80000000,
-+} ;
-+
-+enum {
-+	PCFGID_vendor_b 	= 0,
-+	PCFGID_vendor_m 	= 0x0000ffff,
-+	PCFGID_vendor_IDT_v		= 0x111d,
-+	PCFGID_device_b 	= 16,
-+	PCFGID_device_m 	= 0xffff0000,
-+	PCFGID_device_Acaciade_v	= 0x0207,
-+
-+	PCFG04_command_ioena_b		= 1,
-+	PCFG04_command_ioena_m		= 0x00000001,
-+	PCFG04_command_memena_b 	= 2,
-+	PCFG04_command_memena_m 	= 0x00000002,
-+	PCFG04_command_bmena_b		= 3,
-+	PCFG04_command_bmena_m		= 0x00000004,
-+	PCFG04_command_mwinv_b		= 5,
-+	PCFG04_command_mwinv_m		= 0x00000010,
-+	PCFG04_command_parena_b 	= 7,
-+	PCFG04_command_parena_m 	= 0x00000040,
-+	PCFG04_command_serrena_b	= 9,
-+	PCFG04_command_serrena_m	= 0x00000100,
-+	PCFG04_command_fastbbena_b	= 10,
-+	PCFG04_command_fastbbena_m	= 0x00000200,
-+	PCFG04_status_b 		= 16,
-+	PCFG04_status_m 		= 0xffff0000,
-+	PCFG04_status_66MHz_b		= 21,	// 66 MHz enable
-+	PCFG04_status_66MHz_m		= 0x00200000,
-+	PCFG04_status_fbb_b		= 23,
-+	PCFG04_status_fbb_m		= 0x00800000,
-+	PCFG04_status_mdpe_b		= 24,
-+	PCFG04_status_mdpe_m		= 0x01000000,
-+	PCFG04_status_dst_b		= 25,
-+	PCFG04_status_dst_m		= 0x06000000,
-+	PCFG04_status_sta_b		= 27,
-+	PCFG04_status_sta_m		= 0x08000000,
-+	PCFG04_status_rta_b		= 28,
-+	PCFG04_status_rta_m		= 0x10000000,
-+	PCFG04_status_rma_b		= 29,
-+	PCFG04_status_rma_m		= 0x20000000,
-+	PCFG04_status_sse_b		= 30,
-+	PCFG04_status_sse_m		= 0x40000000,
-+	PCFG04_status_pe_b		= 31,
-+	PCFG04_status_pe_m		= 0x40000000,
-+
-+	PCFG08_revId_b			= 0,
-+	PCFG08_revId_m			= 0x000000ff,
-+	PCFG08_classCode_b		= 0,
-+	PCFG08_classCode_m		= 0xffffff00,
-+	PCFG08_classCode_bridge_v	= 06,
-+	PCFG08_classCode_proc_v 	= 0x0b3000, // processor-MIPS
-+	PCFG0C_cacheline_b		= 0,
-+	PCFG0C_cacheline_m		= 0x000000ff,
-+	PCFG0C_masterLatency_b		= 8,
-+	PCFG0C_masterLatency_m		= 0x0000ff00,
-+	PCFG0C_headerType_b		= 16,
-+	PCFG0C_headerType_m		= 0x00ff0000,
-+	PCFG0C_bist_b			= 24,
-+	PCFG0C_bist_m			= 0xff000000,
-+
-+	PCIPBA_msi_b			= 0,
-+	PCIPBA_msi_m			= 0x00000001,
-+	PCIPBA_p_b			= 3,
-+	PCIPBA_p_m			= 0x00000004,
-+	PCIPBA_baddr_b			= 8,
-+	PCIPBA_baddr_m			= 0xffffff00,
-+
-+	PCFGSS_vendorId_b		= 0,
-+	PCFGSS_vendorId_m		= 0x0000ffff,
-+	PCFGSS_id_b			= 16,
-+	PCFGSS_id_m			= 0xffff0000,
-+
-+	PCFG3C_interruptLine_b		= 0,
-+	PCFG3C_interruptLine_m		= 0x000000ff,
-+	PCFG3C_interruptPin_b		= 8,
-+	PCFG3C_interruptPin_m		= 0x0000ff00,
-+	PCFG3C_minGrant_b		= 16,
-+	PCFG3C_minGrant_m		= 0x00ff0000,
-+	PCFG3C_maxLat_b 		= 24,
-+	PCFG3C_maxLat_m 		= 0xff000000,
-+
-+	PCIPBAC_msi_b			= 0,
-+	PCIPBAC_msi_m			= 0x00000001,
-+	PCIPBAC_p_b			= 1,
-+	PCIPBAC_p_m			= 0x00000002,
-+	PCIPBAC_size_b			= 2,
-+	PCIPBAC_size_m			= 0x0000007c,
-+	PCIPBAC_sb_b			= 7,
-+	PCIPBAC_sb_m			= 0x00000080,
-+	PCIPBAC_pp_b			= 8,
-+	PCIPBAC_pp_m			= 0x00000100,
-+	PCIPBAC_mr_b			= 9,
-+	PCIPBAC_mr_m			= 0x00000600,
-+	PCIPBAC_mr_read_v	=0,	//no prefetching
-+	PCIPBAC_mr_readLine_v	=1,
-+	PCIPBAC_mr_readMult_v	=2,
-+	PCIPBAC_mrl_b			= 11,
-+	PCIPBAC_mrl_m			= 0x00000800,
-+	PCIPBAC_mrm_b			= 12,
-+	PCIPBAC_mrm_m			= 0x00001000,
-+	PCIPBAC_trp_b			= 13,
-+	PCIPBAC_trp_m			= 0x00002000,
-+
-+	PCFG40_trdyTimeout_b		= 0,
-+	PCFG40_trdyTimeout_m		= 0x000000ff,
-+	PCFG40_retryLim_b		= 8,
-+	PCFG40_retryLim_m		= 0x0000ff00,
-+};
-+
-+/*******************************************************************************
-+ *
-+ * PCI Local Base Address [0|1|2|3] Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCILBA_baddr_b		= 0,		// In PCI_t -> pcilba [] .a
-+	PCILBA_baddr_m		= 0xffffff00,
-+} ;
-+/*******************************************************************************
-+ *
-+ * PCI Local Base Address Control Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCILBAC_msi_b		= 0,		// In pPci->pcilba[i].c
-+	PCILBAC_msi_m		= 0x00000001,
-+	PCILBAC_msi_mem_v	= 0,
-+	PCILBAC_msi_io_v	= 1,
-+	PCILBAC_size_b		= 2,	// In pPci->pcilba[i].c
-+	PCILBAC_size_m		= 0x0000007c,
-+	PCILBAC_sb_b		= 7,	// In pPci->pcilba[i].c
-+	PCILBAC_sb_m		= 0x00000080,
-+	PCILBAC_rt_b		= 8,	// In pPci->pcilba[i].c
-+	PCILBAC_rt_m		= 0x00000100,
-+	PCILBAC_rt_noprefetch_v = 0, // mem read
-+	PCILBAC_rt_prefetch_v	= 1, // mem readline
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Local Base Address [0|1|2|3] Mapping Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCILBAM_maddr_b 	= 8,
-+	PCILBAM_maddr_m 	= 0xffffff00,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Decoupled Access Control Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCIDAC_den_b		= 0,
-+	PCIDAC_den_m		= 0x00000001,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Decoupled Access Status Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCIDAS_d_b	= 0,
-+	PCIDAS_d_m	= 0x00000001,
-+	PCIDAS_b_b	= 1,
-+	PCIDAS_b_m	= 0x00000002,
-+	PCIDAS_e_b	= 2,
-+	PCIDAS_e_m	= 0x00000004,
-+	PCIDAS_ofe_b	= 3,
-+	PCIDAS_ofe_m	= 0x00000008,
-+	PCIDAS_off_b	= 4,
-+	PCIDAS_off_m	= 0x00000010,
-+	PCIDAS_ife_b	= 5,
-+	PCIDAS_ife_m	= 0x00000020,
-+	PCIDAS_iff_b	= 6,
-+	PCIDAS_iff_m	= 0x00000040,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI DMA Channel 8 Configuration Register
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCIDMA8C_mbs_b	= 0,		// Maximum Burst Size.
-+	PCIDMA8C_mbs_m	= 0x00000fff,	// { pcidma8c }
-+	PCIDMA8C_our_b	= 12,		// Optimize Unaligned Burst Reads.
-+	PCIDMA8C_our_m	= 0x00001000,	// { pcidma8c }
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI DMA Channel 9 Configuration Register
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCIDMA9C_mbs_b	= 0,		// Maximum Burst Size.
-+	PCIDMA9C_mbs_m	= 0x00000fff, // { pcidma9c }
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCIDMAD_pt_b		= 22,		// in DEVCMD field (descriptor)
-+	PCIDMAD_pt_m		= 0x00c00000,	// preferred transaction field
-+	// These are for reads (DMA channel 8)
-+	PCIDMAD_devcmd_mr_v	= 0,	//memory read
-+	PCIDMAD_devcmd_mrl_v	= 1,	//memory read line
-+	PCIDMAD_devcmd_mrm_v	= 2,	//memory read multiple
-+	PCIDMAD_devcmd_ior_v	= 3,	//I/O read
-+	// These are for writes (DMA channel 9)
-+	PCIDMAD_devcmd_mw_v	= 0,	//memory write
-+	PCIDMAD_devcmd_mwi_v	= 1,	//memory write invalidate
-+	PCIDMAD_devcmd_iow_v	= 3,	//I/O write
-+	
-+	// Swap byte field applies to both DMA channel 8 and 9
-+	PCIDMAD_sb_b		= 24,		// in DEVCMD field (descriptor)
-+	PCIDMAD_sb_m		= 0x01000000,	// swap byte field
-+} ;
-+
-+
-+/*******************************************************************************
-+ *
-+ * PCI Target Control Register
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCITC_rtimer_b		= 0,		// In PCITC_t -> pcitc
-+	PCITC_rtimer_m		= 0x000000ff,
-+	PCITC_dtimer_b		= 8,		// In PCITC_t -> pcitc
-+	PCITC_dtimer_m		= 0x0000ff00,
-+	PCITC_rdr_b		= 18,		// In PCITC_t -> pcitc
-+	PCITC_rdr_m		= 0x00040000,
-+	PCITC_ddt_b		= 19,		// In PCITC_t -> pcitc
-+	PCITC_ddt_m		= 0x00080000,
-+} ;
-+/*******************************************************************************
-+ *
-+ * PCI messaging unit [applies to both inbound and outbound registers ]
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCIM_m0_b	= 0,		// In PCIM_t -> {pci{iic,iim,ioic,ioim}}
-+	PCIM_m0_m	= 0x00000001,	// inbound or outbound message 0
-+	PCIM_m1_b	= 1,		// In PCIM_t -> {pci{iic,iim,ioic,ioim}}
-+	PCIM_m1_m	= 0x00000002,	// inbound or outbound message 1
-+	PCIM_db_b	= 2,		// In PCIM_t -> {pci{iic,iim,ioic,ioim}}
-+	PCIM_db_m	= 0x00000004,	// inbound or outbound doorbell
-+};
-+
-+
-+#endif	// __IDT_RC32365_PCI_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_pci_v.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_pci_v.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32300/rc32365_pci_v.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32300/rc32365_pci_v.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,217 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   PCI header values for IDT 79EB365/336                                                   
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_RC32365_PCI_V_H__
-+#define __IDT_RC32365_PCI_V_H__
-+
-+
-+#define PCI_MSG_VirtualAddress	0xB806C010
-+#define rc32365_pci ((volatile PCI_t) PCI0_VirtualAddress)
-+#define rc32365_pci_msg ((volatile PCIM_t) PCI_MSG_VirtualAddress)
-+
-+#define PCIM_SHFT		0x6
-+#define PCIM_BIT_LEN		0x7
-+#define PCIM_H_EA		0x3
-+#define PCIM_H_IA_FIX		0x4
-+#define PCIM_H_IA_RR		0x5
-+
-+#define PCI_ADDR_START		0x50000000
-+
-+#define CPUTOPCI_MEM_WIN	0x02000000
-+#define CPUTOPCI_IO_WIN		0x00100000
-+#define PCILBA_SIZE_SHFT	2
-+#define PCILBA_SIZE_MASK	0x1F
-+#define SIZE_256MB		0x1C
-+#define SIZE_128MB		0x1B
-+#define SIZE_64MB               0x1A
-+#define SIZE_32MB		0x19
-+#define SIZE_16MB               0x18
-+#define SIZE_4MB		0x16
-+#define SIZE_2MB		0x15
-+#define SIZE_1MB		0x14
-+#define CEDAR_CONFIG0_ADDR	0x80000000
-+#define CEDAR_CONFIG1_ADDR	0x80000004
-+#define CEDAR_CONFIG2_ADDR	0x80000008
-+#define CEDAR_CONFIG3_ADDR	0x8000000C
-+#define CEDAR_CONFIG4_ADDR	0x80000010
-+#define CEDAR_CONFIG5_ADDR	0x80000014
-+#define CEDAR_CONFIG6_ADDR	0x80000018
-+#define CEDAR_CONFIG7_ADDR	0x8000001C
-+#define CEDAR_CONFIG8_ADDR	0x80000020
-+#define CEDAR_CONFIG9_ADDR	0x80000024
-+#define CEDAR_CONFIG10_ADDR	0x80000028
-+#define CEDAR_CONFIG11_ADDR	0x8000002C
-+#define CEDAR_CONFIG12_ADDR	0x80000030
-+#define CEDAR_CONFIG13_ADDR	0x80000034
-+#define CEDAR_CONFIG14_ADDR	0x80000038
-+#define CEDAR_CONFIG15_ADDR	0x8000003C
-+#define CEDAR_CONFIG16_ADDR	0x80000040
-+#define CEDAR_CONFIG17_ADDR	0x80000044
-+#define CEDAR_CONFIG18_ADDR	0x80000048
-+#define CEDAR_CONFIG19_ADDR	0x8000004C
-+#define CEDAR_CONFIG20_ADDR	0x80000050
-+#define CEDAR_CONFIG21_ADDR	0x80000054
-+#define CEDAR_CONFIG22_ADDR	0x80000058
-+#define CEDAR_CONFIG23_ADDR	0x8000005C
-+#define CEDAR_CONFIG24_ADDR	0x80000060
-+#define CEDAR_CONFIG25_ADDR	0x80000064
-+#define CEDAR_CMD 	       (PCFG04_command_ioena_m  | \
-+				PCFG04_command_memena_m | \
-+				PCFG04_command_bmena_m  | \
-+				PCFG04_command_mwinv_m  | \
-+				PCFG04_command_parena_m | \
-+				PCFG04_command_serrena_m )
-+
-+#define CEDAR_STAT	       (PCFG04_status_mdpe_m | \
-+				PCFG04_status_sta_m  | \
-+				PCFG04_status_rta_m  | \
-+				PCFG04_status_rma_m  | \
-+				PCFG04_status_sse_m  | \
-+				PCFG04_status_pe_m)
-+
-+#define CEDAR_CNFG1	      ((CEDAR_STAT << 16) | \
-+                                CEDAR_CMD)
-+
-+#define CEDAR_REVID		0
-+#define CEDAR_CLASS_CODE	0
-+#define CEDAR_CNFG2	      ((CEDAR_CLASS_CODE << 8) | \
-+				CEDAR_REVID)
-+
-+#define CEDAR_CACHE_LINE_SIZE	4
-+#define CEDAR_MASTER_LAT	0x3c
-+#define CEDAR_HEADER_TYPE	0
-+#define CEDAR_BIST		0
-+
-+#define CEDAR_CNFG3           ((CEDAR_BIST        << 24) | \
-+		               (CEDAR_HEADER_TYPE << 16) | \
-+		               (CEDAR_MASTER_LAT  <<  8) | \
-+		                CEDAR_CACHE_LINE_SIZE)
-+
-+#define CEDAR_BAR0	        0x00000008 /* 128 MB Memory */
-+#define CEDAR_BAR1	        0x18800001 /* 1 MB IO */
-+#define CEDAR_BAR2	        0x18000001 /* 2 MB IO window for Cedar
-+				              internal Registers */
-+#define CEDAR_BAR3	        0x48000008 /* Spare 128 MB Memory */
-+
-+#define CEDAR_CNFG4	        CEDAR_BAR0
-+#define CEDAR_CNFG5             CEDAR_BAR1
-+#define CEDAR_CNFG6 	        CEDAR_BAR2
-+#define CEDAR_CNFG7	        CEDAR_BAR3
-+
-+#define CEDAR_SUBSYS_VENDOR_ID  0
-+#define CEDAR_SUBSYSTEM_ID	0
-+#define CEDAR_CNFG8		0
-+#define CEDAR_CNFG9		0
-+#define CEDAR_CNFG10		0
-+#define CEDAR_CNFG11 	      ((CEDAR_SUBSYS_VENDOR_ID << 16) | \
-+			        CEDAR_SUBSYSTEM_ID)
-+#define CEDAR_INT_LINE		1
-+#define CEDAR_INT_PIN		1
-+#define CEDAR_MIN_GNT		8
-+#define CEDAR_MAX_LAT		0x38
-+#define CEDAR_CNFG12		0
-+#define CEDAR_CNFG13 		0
-+#define CEDAR_CNFG14		0
-+#define CEDAR_CNFG15	      ((CEDAR_MAX_LAT << 24) | \
-+			       (CEDAR_MIN_GNT << 16) | \
-+			       (CEDAR_INT_PIN <<  8) | \
-+			        CEDAR_INT_LINE)
-+#define	CEDAR_RETRY_LIMIT	0x80
-+#define CEDAR_TRDY_LIMIT	0x80
-+#define CEDAR_CNFG16          ((CEDAR_RETRY_LIMIT << 8) | \
-+			        CEDAR_TRDY_LIMIT)
-+#define PCI_PBAxC_R		0x0
-+#define PCI_PBAxC_RL		0x1
-+#define PCI_PBAxC_RM		0x2
-+#define SIZE_SHFT		2
-+#ifdef __MIPSEB__
-+#define CEDAR_PBA0C	       (((1 & 0x3) << PCIPBAC_mr_b) | \
-+			        PCIPBAC_pp_m | \
-+				PCIPBAC_sb_m | \
-+			       (SIZE_128MB << SIZE_SHFT) | \
-+			        PCIPBAC_p_m)
-+#else
-+
-+#define CEDAR_PBA0C	       (((1 & 0x3) << PCIPBAC_mr_b) | \
-+			        PCIPBAC_pp_m | \
-+			       (SIZE_128MB << SIZE_SHFT) | \
-+			        PCIPBAC_p_m)
-+#endif
-+#define CEDAR_CNFG17	        CEDAR_PBA0C
-+#define CEDAR_PBA0M	        0x0
-+#define CEDAR_CNFG18	        CEDAR_PBA0M
-+
-+#ifdef __MIPSEB__
-+#define CEDAR_PBA1C	      ((SIZE_1MB << SIZE_SHFT) | \
-+				PCIPBAC_sb_m | \
-+			        PCIPBAC_msi_m)
-+#else
-+#define CEDAR_PBA1C	      ((SIZE_1MB << SIZE_SHFT) | \
-+			        PCIPBAC_msi_m)
-+#endif
-+#define CEDAR_CNFG19	        CEDAR_PBA1C
-+#define CEDAR_PBA1M	        0x0
-+#define CEDAR_CNFG20	        CEDAR_PBA1M
-+
-+#ifdef __MIPSEB__
-+#define CEDAR_PBA2C	      ((SIZE_2MB << SIZE_SHFT) |  \
-+				PCIPBAC_sb_m | \
-+			        PCIPBAC_msi_m)
-+#else
-+#define CEDAR_PBA2C	      ((SIZE_2MB << SIZE_SHFT) |  \
-+			        PCIPBAC_msi_m)
-+#endif
-+
-+#define CEDAR_CNFG21	        CEDAR_PBA2C
-+#define CEDAR_PBA2M	        0x18000000
-+#define CEDAR_CNFG22	        CEDAR_PBA2M
-+
-+#ifdef __MIPSEB__
-+#define CEDAR_PBA3C	        PCIPBAC_sb_m
-+#else
-+#define CEDAR_PBA3C	        0 
-+#endif
-+
-+#define CEDAR_CNFG23	        CEDAR_PBA3C
-+#define CEDAR_PBA3M	        0
-+#define CEDAR_CNFG24	        CEDAR_PBA3M
-+
-+#define	PCITC_DTIMER_VAL	8
-+#define PCITC_RTIMER_VAL	0x10
-+
-+#endif //__IDT_RC32365_PCI_V_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_dma.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_dma.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_dma.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_dma.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,205 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   DMA register definition
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_DMA_H__
-+#define __IDT_DMA_H__
-+
-+enum
-+{
-+	DMA0_PhysicalAddress	= 0x18040000,
-+	DMA_PhysicalAddress	= DMA0_PhysicalAddress,		// Default
-+
-+	DMA0_VirtualAddress	= 0xb8040000,
-+	DMA_VirtualAddress	= DMA0_VirtualAddress,		// Default
-+} ;
-+
-+/*
-+ * DMA descriptor (in physical memory).
-+ */
-+
-+typedef struct DMAD_s
-+{
-+	u32			control ;	// Control. use DMAD_*
-+	u32			ca ;		// Current Address.
-+	u32			devcs ; 	// Device control and status.
-+	u32			link ;		// Next descriptor in chain.
-+} volatile *DMAD_t ;
-+
-+enum
-+{
-+	DMAD_size		= sizeof (struct DMAD_s),
-+	DMAD_count_b		= 0,		// in DMAD_t -> control
-+	DMAD_count_m		= 0x0003ffff,	// in DMAD_t -> control
-+	DMAD_ds_b		= 20,		// in DMAD_t -> control
-+	DMAD_ds_m		= 0x00300000,	// in DMAD_t -> control
-+		DMAD_ds_ethRcv0_v	= 0,
-+		DMAD_ds_ethXmt0_v	= 0,
-+		DMAD_ds_memToFifo_v	= 0,
-+		DMAD_ds_fifoToMem_v	= 0,
-+		DMAD_ds_pciToMem_v	= 0,
-+		DMAD_ds_memToPci_v	= 0,
-+	
-+	DMAD_devcmd_b		= 22,		// in DMAD_t -> control
-+	DMAD_devcmd_m		= 0x01c00000,	// in DMAD_t -> control
-+		DMAD_devcmd_byte_v	= 0,	//memory-to-memory
-+		DMAD_devcmd_halfword_v	= 1,	//memory-to-memory
-+		DMAD_devcmd_word_v	= 2,	//memory-to-memory
-+		DMAD_devcmd_2words_v	= 3,	//memory-to-memory
-+		DMAD_devcmd_4words_v	= 4,	//memory-to-memory
-+		DMAD_devcmd_6words_v	= 5,	//memory-to-memory
-+		DMAD_devcmd_8words_v	= 6,	//memory-to-memory
-+		DMAD_devcmd_16words_v	= 7,	//memory-to-memory
-+	DMAD_cof_b		= 25,		// chain on finished
-+	DMAD_cof_m		= 0x02000000,	// 
-+	DMAD_cod_b		= 26,		// chain on done
-+	DMAD_cod_m		= 0x04000000,	// 
-+	DMAD_iof_b		= 27,		// interrupt on finished
-+	DMAD_iof_m		= 0x08000000,	// 
-+	DMAD_iod_b		= 28,		// interrupt on done
-+	DMAD_iod_m		= 0x10000000,	// 
-+	DMAD_t_b		= 29,		// terminated
-+	DMAD_t_m		= 0x20000000,	// 
-+	DMAD_d_b		= 30,		// done
-+	DMAD_d_m		= 0x40000000,	// 
-+	DMAD_f_b		= 31,		// finished
-+	DMAD_f_m		= 0x80000000,	// 
-+} ;
-+
-+/*
-+ * DMA register (within Internal Register Map).
-+ */
-+
-+struct DMA_Chan_s
-+{
-+	u32		dmac ;		// Control.
-+	u32		dmas ;		// Status.	
-+	u32		dmasm ; 	// Mask.
-+	u32		dmadptr ;	// Descriptor pointer.
-+	u32		dmandptr ;	// Next descriptor pointer.
-+};
-+
-+typedef struct DMA_Chan_s volatile *DMA_Chan_t ;
-+
-+//DMA_Channels	  use DMACH_count instead
-+
-+enum
-+{
-+	DMAC_run_b	= 0,		// 
-+	DMAC_run_m	= 0x00000001,	// 
-+	DMAC_dm_b	= 1,		// done mask
-+	DMAC_dm_m	= 0x00000002,	// 
-+	DMAC_mode_b	= 2,		// 
-+	DMAC_mode_m	= 0x0000000c,	// 
-+		DMAC_mode_auto_v	= 0,
-+		DMAC_mode_burst_v	= 1,
-+		DMAC_mode_transfer_v	= 2, //usually used
-+		DMAC_mode_reserved_v	= 3,
-+	DMAC_a_b	= 4,		// 
-+	DMAC_a_m	= 0x00000010,	// 
-+
-+	DMAS_f_b	= 0,		// finished (sticky) 
-+	DMAS_f_m	= 0x00000001,	//		     
-+	DMAS_d_b	= 1,		// done (sticky)     
-+	DMAS_d_m	= 0x00000002,	//		     
-+	DMAS_c_b	= 2,		// chain (sticky)    
-+	DMAS_c_m	= 0x00000004,	//		     
-+	DMAS_e_b	= 3,		// error (sticky)    
-+	DMAS_e_m	= 0x00000008,	//		     
-+	DMAS_h_b	= 4,		// halt (sticky)     
-+	DMAS_h_m	= 0x00000010,	//		     
-+
-+	DMASM_f_b	= 0,		// finished (1=mask)
-+	DMASM_f_m	= 0x00000001,	// 
-+	DMASM_d_b	= 1,		// done (1=mask)
-+	DMASM_d_m	= 0x00000002,	// 
-+	DMASM_c_b	= 2,		// chain (1=mask)
-+	DMASM_c_m	= 0x00000004,	// 
-+	DMASM_e_b	= 3,		// error (1=mask)
-+	DMASM_e_m	= 0x00000008,	// 
-+	DMASM_h_b	= 4,		// halt (1=mask)
-+	DMASM_h_m	= 0x00000010,	// 
-+} ;
-+
-+/*
-+ * DMA channel definitions
-+ */
-+
-+enum
-+{
-+	DMACH_ethRcv0 = 0,
-+	DMACH_ethXmt0 = 1,
-+	DMACH_memToFifo = 2,
-+	DMACH_fifoToMem = 3,
-+	DMACH_pciToMem = 4,
-+	DMACH_memToPci = 5,
-+
-+	DMACH_count //must be last
-+};
-+
-+
-+typedef struct DMAC_s
-+{
-+	struct DMA_Chan_s ch [DMACH_count] ; //use ch[DMACH_]
-+} volatile *DMA_t ;
-+
-+
-+/*
-+ * External DMA parameters
-+*/
-+
-+enum
-+{
-+	DMADEVCMD_ts_b	= 0,		// ts field in devcmd
-+	DMADEVCMD_ts_m	= 0x00000007,	// ts field in devcmd
-+		DMADEVCMD_ts_byte_v	= 0,
-+		DMADEVCMD_ts_halfword_v	= 1,
-+		DMADEVCMD_ts_word_v	= 2,
-+		DMADEVCMD_ts_2word_v	= 3,
-+		DMADEVCMD_ts_4word_v	= 4,
-+		DMADEVCMD_ts_6word_v	= 5,
-+		DMADEVCMD_ts_8word_v	= 6,
-+		DMADEVCMD_ts_16word_v	= 7
-+};
-+
-+
-+#endif	// __IDT_DMA_H__
-+
-+
-+
-+
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_dma_v.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_dma_v.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_dma_v.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_dma_v.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,89 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Definitions for DMA controller.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_DMA_V_H__
-+#define __IDT_DMA_V_H__
-+
-+#include  <asm/idt-boards/rc32434/rc32434_dma.h> 
-+#include  <asm/idt-boards/rc32434/rc32434.h>
-+
-+#define DMA_CHAN_OFFSET  0x14
-+#define IS_DMA_USED(X) (((X) & (DMAD_f_m | DMAD_d_m | DMAD_t_m)) != 0)
-+#define DMA_COUNT(count)   \
-+  ((count) & DMAD_count_m)
-+
-+#define DMA_HALT_TIMEOUT 500
-+
-+
-+static inline int rc32434_halt_dma(DMA_Chan_t ch)
-+{
-+	int timeout=1;
-+	if (rc32434_readl(&ch->dmac) & DMAC_run_m) {
-+		rc32434_writel(0, &ch->dmac); 
-+		
-+		for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) {
-+			if (rc32434_readl(&ch->dmas) & DMAS_h_m) {
-+				rc32434_writel(0, &ch->dmas);  
-+				break;
-+			}
-+		}
-+
-+	}
-+	
-+	return timeout ? 0 : 1;
-+}
-+
-+static inline void rc32434_start_dma(DMA_Chan_t ch, u32 dma_addr)
-+{
-+	rc32434_writel(0, &ch->dmandptr); 
-+	rc32434_writel(dma_addr, &ch->dmadptr);
-+}
-+
-+static inline void rc32434_chain_dma(DMA_Chan_t ch, u32 dma_addr)
-+{
-+	rc32434_writel(dma_addr, &ch->dmandptr);
-+}
-+
-+#endif	// __IDT_DMA_V_H__
-+
-+
-+
-+
-+
-+
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_eth.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_eth.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_eth.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_eth.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,333 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Ethernet register definition
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef	__IDT_ETH_H__
-+#define	__IDT_ETH_H__
-+
-+
-+enum
-+{
-+	ETH0_PhysicalAddress	= 0x18060000,
-+	ETH_PhysicalAddress	= ETH0_PhysicalAddress,		// Default
-+
-+	ETH0_VirtualAddress	= 0xb8060000,
-+	ETH_VirtualAddress	= ETH0_VirtualAddress,		// Default
-+} ;
-+
-+typedef struct
-+{
-+	u32 ethintfc		;
-+	u32 ethfifott		;
-+	u32 etharc		;
-+	u32 ethhash0		;
-+	u32 ethhash1		;
-+	u32 ethu0 [4]		;	// Reserved.	
-+	u32 ethpfs		;
-+	u32 ethmcp		;
-+	u32 eth_u1 [10]		;	// Reserved.
-+	u32 ethspare		;
-+	u32 eth_u2 [42]		;	// Reserved. 
-+	u32 ethsal0		;
-+	u32 ethsah0		;
-+	u32 ethsal1		;
-+	u32 ethsah1		;
-+	u32 ethsal2		;
-+	u32 ethsah2		;
-+	u32 ethsal3		;
-+	u32 ethsah3		;
-+	u32 ethrbc		;
-+	u32 ethrpc		;
-+	u32 ethrupc		;
-+	u32 ethrfc		;
-+	u32 ethtbc		;
-+	u32 ethgpf		;
-+	u32 eth_u9 [50]		;	// Reserved.	
-+	u32 ethmac1		;
-+	u32 ethmac2		;
-+	u32 ethipgt		;
-+	u32 ethipgr		;
-+	u32 ethclrt		;
-+	u32 ethmaxf		;
-+	u32 eth_u10		;	// Reserved.	
-+	u32 ethmtest		;
-+	u32 miimcfg		;
-+	u32 miimcmd		;
-+	u32 miimaddr		;
-+	u32 miimwtd		;
-+	u32 miimrdd		;
-+	u32 miimind		;
-+	u32 eth_u11		;	// Reserved.
-+	u32 eth_u12		;	// Reserved.
-+	u32 ethcfsa0		;
-+	u32 ethcfsa1		;
-+	u32 ethcfsa2		;
-+} volatile *ETH_t;
-+
-+enum
-+{
-+	ETHINTFC_en_b		= 0,
-+	ETHINTFC_en_m		= 0x00000001,
-+	ETHINTFC_its_b		= 1,
-+	ETHINTFC_its_m		= 0x00000002,
-+	ETHINTFC_rip_b		= 2,
-+	ETHINTFC_rip_m		= 0x00000004,
-+	ETHINTFC_jam_b		= 3,
-+	ETHINTFC_jam_m		= 0x00000008,
-+	ETHINTFC_ovr_b		= 4,
-+	ETHINTFC_ovr_m		= 0x00000010,
-+	ETHINTFC_und_b		= 5,
-+	ETHINTFC_und_m		= 0x00000020,
-+
-+	ETHFIFOTT_tth_b		= 0,
-+	ETHFIFOTT_tth_m		= 0x0000007f,
-+
-+	ETHARC_pro_b		= 0,
-+	ETHARC_pro_m		= 0x00000001,
-+	ETHARC_am_b		= 1,
-+	ETHARC_am_m		= 0x00000002,
-+	ETHARC_afm_b		= 2,
-+	ETHARC_afm_m		= 0x00000004,
-+	ETHARC_ab_b		= 3,
-+	ETHARC_ab_m		= 0x00000008,
-+
-+	ETHSAL_byte5_b		= 0,
-+	ETHSAL_byte5_m		= 0x000000ff,
-+	ETHSAL_byte4_b		= 8,
-+	ETHSAL_byte4_m		= 0x0000ff00,
-+	ETHSAL_byte3_b		= 16,
-+	ETHSAL_byte3_m		= 0x00ff0000,
-+	ETHSAL_byte2_b		= 24,
-+	ETHSAL_byte2_m		= 0xff000000,
-+
-+	ETHSAH_byte1_b		= 0,
-+	ETHSAH_byte1_m		= 0x000000ff,
-+	ETHSAH_byte0_b		= 8,
-+	ETHSAH_byte0_m		= 0x0000ff00,
-+	
-+	ETHGPF_ptv_b		= 0,
-+	ETHGPF_ptv_m		= 0x0000ffff,
-+
-+	ETHPFS_pfd_b		= 0,
-+	ETHPFS_pfd_m		= 0x00000001,
-+
-+	ETHCFSA0_cfsa4_b	= 0,
-+	ETHCFSA0_cfsa4_m	= 0x000000ff,
-+	ETHCFSA0_cfsa5_b	= 8,
-+	ETHCFSA0_cfsa5_m	= 0x0000ff00,
-+
-+	ETHCFSA1_cfsa2_b	= 0,
-+	ETHCFSA1_cfsa2_m	= 0x000000ff,
-+	ETHCFSA1_cfsa3_b	= 8,
-+	ETHCFSA1_cfsa3_m	= 0x0000ff00,
-+
-+	ETHCFSA2_cfsa0_b	= 0,
-+	ETHCFSA2_cfsa0_m	= 0x000000ff,
-+	ETHCFSA2_cfsa1_b	= 8,
-+	ETHCFSA2_cfsa1_m	= 0x0000ff00,
-+
-+	ETHMAC1_re_b		= 0,
-+	ETHMAC1_re_m		= 0x00000001,
-+	ETHMAC1_paf_b		= 1,
-+	ETHMAC1_paf_m		= 0x00000002,
-+	ETHMAC1_rfc_b		= 2,
-+	ETHMAC1_rfc_m		= 0x00000004,
-+	ETHMAC1_tfc_b		= 3,
-+	ETHMAC1_tfc_m		= 0x00000008,
-+	ETHMAC1_lb_b		= 4,
-+	ETHMAC1_lb_m		= 0x00000010,
-+	ETHMAC1_mr_b		= 31,
-+	ETHMAC1_mr_m		= 0x80000000,
-+
-+	ETHMAC2_fd_b		= 0,
-+	ETHMAC2_fd_m		= 0x00000001,
-+	ETHMAC2_flc_b		= 1,
-+	ETHMAC2_flc_m		= 0x00000002,
-+	ETHMAC2_hfe_b		= 2,
-+	ETHMAC2_hfe_m		= 0x00000004,
-+	ETHMAC2_dc_b		= 3,
-+	ETHMAC2_dc_m		= 0x00000008,
-+	ETHMAC2_cen_b		= 4,
-+	ETHMAC2_cen_m		= 0x00000010,
-+	ETHMAC2_pe_b		= 5,
-+	ETHMAC2_pe_m		= 0x00000020,
-+	ETHMAC2_vpe_b		= 6,
-+	ETHMAC2_vpe_m		= 0x00000040,
-+	ETHMAC2_ape_b		= 7,
-+	ETHMAC2_ape_m		= 0x00000080,
-+	ETHMAC2_ppe_b		= 8,
-+	ETHMAC2_ppe_m		= 0x00000100,
-+	ETHMAC2_lpe_b		= 9,
-+	ETHMAC2_lpe_m		= 0x00000200,
-+	ETHMAC2_nb_b		= 12,
-+	ETHMAC2_nb_m		= 0x00001000,
-+	ETHMAC2_bp_b		= 13,
-+	ETHMAC2_bp_m		= 0x00002000,
-+	ETHMAC2_ed_b		= 14,
-+	ETHMAC2_ed_m		= 0x00004000,
-+
-+	ETHIPGT_ipgt_b		= 0,
-+	ETHIPGT_ipgt_m		= 0x0000007f,
-+
-+	ETHIPGR_ipgr2_b		= 0,
-+	ETHIPGR_ipgr2_m		= 0x0000007f,
-+	ETHIPGR_ipgr1_b		= 8,
-+	ETHIPGR_ipgr1_m		= 0x00007f00,
-+
-+	ETHCLRT_maxret_b	= 0,
-+	ETHCLRT_maxret_m	= 0x0000000f,
-+	ETHCLRT_colwin_b	= 8,
-+	ETHCLRT_colwin_m	= 0x00003f00,
-+
-+	ETHMAXF_maxf_b		= 0,
-+	ETHMAXF_maxf_m		= 0x0000ffff,
-+
-+	ETHMTEST_tb_b		= 2,
-+	ETHMTEST_tb_m		= 0x00000004,
-+
-+	ETHMCP_div_b		= 0,
-+	ETHMCP_div_m		= 0x000000ff,
-+	
-+	MIIMCFG_rsv_b		= 0,
-+	MIIMCFG_rsv_m		= 0x0000000c,
-+
-+	MIIMCMD_rd_b		= 0,
-+	MIIMCMD_rd_m		= 0x00000001,
-+	MIIMCMD_scn_b		= 1,
-+	MIIMCMD_scn_m		= 0x00000002,
-+
-+	MIIMADDR_regaddr_b	= 0,
-+	MIIMADDR_regaddr_m	= 0x0000001f,
-+	MIIMADDR_phyaddr_b	= 8,
-+	MIIMADDR_phyaddr_m	= 0x00001f00,
-+
-+	MIIMWTD_wdata_b		= 0,
-+	MIIMWTD_wdata_m		= 0x0000ffff,
-+
-+	MIIMRDD_rdata_b		= 0,
-+	MIIMRDD_rdata_m		= 0x0000ffff,
-+
-+	MIIMIND_bsy_b		= 0,
-+	MIIMIND_bsy_m		= 0x00000001,
-+	MIIMIND_scn_b		= 1,
-+	MIIMIND_scn_m		= 0x00000002,
-+	MIIMIND_nv_b		= 2,
-+	MIIMIND_nv_m		= 0x00000004,
-+
-+} ;
-+
-+/*
-+ * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors.
-+ */
-+enum
-+{
-+	ETHRX_fd_b		= 0,
-+	ETHRX_fd_m		= 0x00000001,
-+	ETHRX_ld_b		= 1,
-+	ETHRX_ld_m		= 0x00000002,
-+	ETHRX_rok_b		= 2,
-+	ETHRX_rok_m		= 0x00000004,
-+	ETHRX_fm_b		= 3,
-+	ETHRX_fm_m		= 0x00000008,
-+	ETHRX_mp_b		= 4,
-+	ETHRX_mp_m		= 0x00000010,
-+	ETHRX_bp_b		= 5,
-+	ETHRX_bp_m		= 0x00000020,
-+	ETHRX_vlt_b		= 6,
-+	ETHRX_vlt_m		= 0x00000040,
-+	ETHRX_cf_b		= 7,
-+	ETHRX_cf_m		= 0x00000080,
-+	ETHRX_ovr_b		= 8,
-+	ETHRX_ovr_m		= 0x00000100,
-+	ETHRX_crc_b		= 9,
-+	ETHRX_crc_m		= 0x00000200,
-+	ETHRX_cv_b		= 10,
-+	ETHRX_cv_m		= 0x00000400,
-+	ETHRX_db_b		= 11,
-+	ETHRX_db_m		= 0x00000800,
-+	ETHRX_le_b		= 12,
-+	ETHRX_le_m		= 0x00001000,
-+	ETHRX_lor_b		= 13,
-+	ETHRX_lor_m		= 0x00002000,
-+	ETHRX_ces_b		= 14,
-+	ETHRX_ces_m		= 0x00004000,
-+	ETHRX_length_b		= 16,
-+	ETHRX_length_m		= 0xffff0000,
-+
-+	ETHTX_fd_b		= 0,
-+	ETHTX_fd_m		= 0x00000001,
-+	ETHTX_ld_b		= 1,
-+	ETHTX_ld_m		= 0x00000002,
-+	ETHTX_oen_b		= 2,
-+	ETHTX_oen_m		= 0x00000004,
-+	ETHTX_pen_b		= 3,
-+	ETHTX_pen_m		= 0x00000008,
-+	ETHTX_cen_b		= 4,
-+	ETHTX_cen_m		= 0x00000010,
-+	ETHTX_hen_b		= 5,
-+	ETHTX_hen_m		= 0x00000020,
-+	ETHTX_tok_b		= 6,
-+	ETHTX_tok_m		= 0x00000040,
-+	ETHTX_mp_b		= 7,
-+	ETHTX_mp_m		= 0x00000080,
-+	ETHTX_bp_b		= 8,
-+	ETHTX_bp_m		= 0x00000100,
-+	ETHTX_und_b		= 9,
-+	ETHTX_und_m		= 0x00000200,
-+	ETHTX_of_b		= 10,
-+	ETHTX_of_m		= 0x00000400,
-+	ETHTX_ed_b		= 11,
-+	ETHTX_ed_m		= 0x00000800,
-+	ETHTX_ec_b		= 12,
-+	ETHTX_ec_m		= 0x00001000,
-+	ETHTX_lc_b		= 13,
-+	ETHTX_lc_m		= 0x00002000,
-+	ETHTX_td_b		= 14,
-+	ETHTX_td_m		= 0x00004000,
-+	ETHTX_crc_b		= 15,
-+	ETHTX_crc_m		= 0x00008000,
-+	ETHTX_le_b		= 16,
-+	ETHTX_le_m		= 0x00010000,
-+	ETHTX_cc_b		= 17,
-+	ETHTX_cc_m		= 0x001E0000,
-+} ;
-+
-+#endif	// __IDT_ETH_H__
-+
-+
-+
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_eth_v.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_eth_v.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_eth_v.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_eth_v.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,77 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Ethernet register definition
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef	__IDT_ETH_V_H__
-+#define	__IDT_ETH_V_H__
-+
-+#include  <asm/idt-boards/rc32434/rc32434_eth.h> 
-+
-+#define IS_TX_TOK(X)         (((X) & (1<<ETHTX_tok_b)) >> ETHTX_tok_b )   /* Transmit Okay    */
-+#define IS_TX_MP(X)          (((X) & (1<<ETHTX_mp_b))  >> ETHTX_mp_b )    /* Multicast        */
-+#define IS_TX_BP(X)          (((X) & (1<<ETHTX_bp_b))  >> ETHTX_bp_b )    /* Broadcast        */
-+#define IS_TX_UND_ERR(X)     (((X) & (1<<ETHTX_und_b)) >> ETHTX_und_b )   /* Transmit FIFO Underflow */
-+#define IS_TX_OF_ERR(X)      (((X) & (1<<ETHTX_of_b))  >> ETHTX_of_b )    /* Oversized frame  */
-+#define IS_TX_ED_ERR(X)      (((X) & (1<<ETHTX_ed_b))  >> ETHTX_ed_b )    /* Excessive deferral  */
-+#define IS_TX_EC_ERR(X)      (((X) & (1<<ETHTX_ec_b))  >> ETHTX_ec_b)     /* Excessive collisions  */
-+#define IS_TX_LC_ERR(X)      (((X) & (1<<ETHTX_lc_b))  >> ETHTX_lc_b )    /* Late Collision   */
-+#define IS_TX_TD_ERR(X)      (((X) & (1<<ETHTX_td_b))  >> ETHTX_td_b )    /* Transmit deferred*/
-+#define IS_TX_CRC_ERR(X)     (((X) & (1<<ETHTX_crc_b)) >> ETHTX_crc_b )   /* CRC Error        */
-+#define IS_TX_LE_ERR(X)      (((X) & (1<<ETHTX_le_b))  >>  ETHTX_le_b )    /* Length Error     */
-+
-+#define TX_COLLISION_COUNT(X) (((X) & ETHTX_cc_m)>>ETHTX_cc_b)  /* Collision Count  */
-+
-+#define IS_RCV_ROK(X)        (((X) & (1<<ETHRX_rok_b)) >> ETHRX_rok_b)    /* Receive Okay     */
-+#define IS_RCV_FM(X)         (((X) & (1<<ETHRX_fm_b))  >> ETHRX_fm_b)     /* Is Filter Match  */
-+#define IS_RCV_MP(X)         (((X) & (1<<ETHRX_mp_b))  >> ETHRX_mp_b)     /* Is it MP         */
-+#define IS_RCV_BP(X)         (((X) & (1<<ETHRX_bp_b))  >> ETHRX_bp_b)     /* Is it BP         */
-+#define IS_RCV_VLT(X)        (((X) & (1<<ETHRX_vlt_b)) >> ETHRX_vlt_b)    /* VLAN Tag Detect  */
-+#define IS_RCV_CF(X)         (((X) & (1<<ETHRX_cf_b))  >> ETHRX_cf_b)     /* Control Frame    */
-+#define IS_RCV_OVR_ERR(X)    (((X) & (1<<ETHRX_ovr_b)) >> ETHRX_ovr_b)    /* Receive Overflow */
-+#define IS_RCV_CRC_ERR(X)    (((X) & (1<<ETHRX_crc_b)) >> ETHRX_crc_b)    /* CRC Error        */
-+#define IS_RCV_CV_ERR(X)     (((X) & (1<<ETHRX_cv_b))  >> ETHRX_cv_b)     /* Code Violation   */
-+#define IS_RCV_DB_ERR(X)     (((X) & (1<<ETHRX_db_b))  >> ETHRX_db_b)     /* Dribble Bits     */
-+#define IS_RCV_LE_ERR(X)     (((X) & (1<<ETHRX_le_b))  >> ETHRX_le_b)     /* Length error     */
-+#define IS_RCV_LOR_ERR(X)    (((X) & (1<<ETHRX_lor_b)) >> ETHRX_lor_b)    /* Length Out of Range */
-+#define IS_RCV_CES_ERR(X)    (((X) & (1<<ETHRX_ces_b)) >> ETHRX_ces_b)  /* Preamble error   */
-+#define RCVPKT_LENGTH(X)     (((X) & ETHRX_length_m) >> ETHRX_length_b)   /* Length of the received packet */
-+#endif	// __IDT_ETH_V_H__
-+
-+
-+
-+
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_gpio.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_gpio.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_gpio.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_gpio.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,167 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   GPIO register definition
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_GPIO_H__
-+#define __IDT_GPIO_H__
-+
-+enum
-+{
-+	GPIO0_PhysicalAddress	= 0x18050000,
-+	GPIO_PhysicalAddress	= GPIO0_PhysicalAddress,	// Default
-+
-+	GPIO0_VirtualAddress	= 0xb8050000,
-+	GPIO_VirtualAddress	= GPIO0_VirtualAddress,		// Default
-+} ;
-+
-+typedef struct
-+{
-+	u32   gpiofunc;   /* GPIO Function Register
-+			   * gpiofunc[x]==0 bit = gpio
-+			   * func[x]==1  bit = altfunc
-+			   */
-+	u32   gpiocfg;	  /* GPIO Configuration Register
-+			   * gpiocfg[x]==0 bit = input
-+			   * gpiocfg[x]==1 bit = output
-+			   */
-+	u32   gpiod;	  /* GPIO Data Register
-+			   * gpiod[x] read/write gpio pinX status
-+			   */
-+	u32   gpioilevel; /* GPIO Interrupt Status Register
-+			   * interrupt level (see gpioistat)
-+			   */
-+	u32   gpioistat;  /* Gpio Interrupt Status Register
-+			   * istat[x] = (gpiod[x] == level[x])
-+			   * cleared in ISR (STICKY bits)
-+			   */
-+	u32   gpionmien;  /* GPIO Non-maskable Interrupt Enable Register */
-+} volatile * GPIO_t ;
-+
-+typedef enum
-+{
-+	GPIO_gpio_v		= 0,		// gpiofunc use pin as GPIO.
-+	GPIO_alt_v		= 1,		// gpiofunc use pin as alt.
-+	GPIO_input_v		= 0,		// gpiocfg use pin as input.
-+	GPIO_output_v		= 1,		// gpiocfg use pin as output.
-+	GPIO_pin0_b		= 0,
-+	GPIO_pin0_m		= 0x00000001,
-+	GPIO_pin1_b		= 1,
-+	GPIO_pin1_m		= 0x00000002,
-+	GPIO_pin2_b		= 2,
-+	GPIO_pin2_m		= 0x00000004,
-+	GPIO_pin3_b		= 3,
-+	GPIO_pin3_m		= 0x00000008,
-+	GPIO_pin4_b		= 4,
-+	GPIO_pin4_m		= 0x00000010,
-+	GPIO_pin5_b		= 5,
-+	GPIO_pin5_m		= 0x00000020,
-+	GPIO_pin6_b		= 6,
-+	GPIO_pin6_m		= 0x00000040,
-+	GPIO_pin7_b		= 7,
-+	GPIO_pin7_m		= 0x00000080,
-+	GPIO_pin8_b		= 8,
-+	GPIO_pin8_m		= 0x00000100,
-+	GPIO_pin9_b		= 9,
-+	GPIO_pin9_m		= 0x00000200,
-+	GPIO_pin10_b		= 10,
-+	GPIO_pin10_m		= 0x00000400,
-+	GPIO_pin11_b		= 11,
-+	GPIO_pin11_m		= 0x00000800,
-+	GPIO_pin12_b		= 12,
-+	GPIO_pin12_m		= 0x00001000,
-+	GPIO_pin13_b		= 13,
-+	GPIO_pin13_m		= 0x00002000,
-+
-+// Alternate function pins.  Corrsponding gpiofunc bit set to GPIO_alt_v.
-+
-+	GPIO_u0sout_b		= GPIO_pin0_b,		// UART 0 serial out.
-+	GPIO_u0sout_m		= GPIO_pin0_m,
-+		GPIO_u0sout_cfg_v	= GPIO_output_v,
-+	GPIO_u0sinp_b	= GPIO_pin1_b,			// UART 0 serial in.
-+	GPIO_u0sinp_m	= GPIO_pin1_m,
-+		GPIO_u0sinp_cfg_v	= GPIO_input_v,
-+	GPIO_u0rtsn_b	= GPIO_pin2_b,			// UART 0 req. to send.
-+	GPIO_u0rtsn_m	= GPIO_pin2_m,
-+		GPIO_u0rtsn_cfg_v	= GPIO_output_v,
-+	GPIO_u0ctsn_b	= GPIO_pin3_b,			// UART 0 clear to send.
-+	GPIO_u0ctsn_m	= GPIO_pin3_m,
-+		GPIO_u0ctsn_cfg_v	= GPIO_input_v,
-+
-+	GPIO_maddr22_b		= GPIO_pin4_b, 	// M&P bus bit 22.
-+	GPIO_maddr22_m		= GPIO_pin4_m,
-+		GPIO_maddr22_cfg_v	= GPIO_output_v,
-+
-+	GPIO_maddr23_b		= GPIO_pin5_b, 	// M&P bus bit 23.
-+	GPIO_maddr23_m		= GPIO_pin5_m,
-+		GPIO_maddr23_cfg_v	= GPIO_output_v,
-+
-+	GPIO_maddr24_b		= GPIO_pin6_b, 	// M&P bus bit 24.
-+	GPIO_maddr24_m		= GPIO_pin6_m,
-+		GPIO_maddr24_cfg_v	= GPIO_output_v,
-+
-+	GPIO_maddr25_b		= GPIO_pin7_b, 	// M&P bus bit 25.
-+	GPIO_maddr25_m		= GPIO_pin7_m,
-+		GPIO_maddr25_cfg_v	= GPIO_output_v,
-+
-+	GPIO_cpudmadebug_b 	= GPIO_pin8_b, 	// CPU or DMA debug pin
-+	GPIO_cpudmadebug_m 	= GPIO_pin8_m,
-+		GPIO_cpudmadebug_cfg_v	= GPIO_output_v,
-+
-+	GPIO_pcireq4_b 	= GPIO_pin9_b, 	// PCI Request 4
-+	GPIO_pcireq4_m 	= GPIO_pin9_m,
-+		GPIO_pcireq4_cfg_v	= GPIO_input_v,
-+
-+	GPIO_pcigrant4_b 	= GPIO_pin10_b, 	// PCI Grant 4
-+	GPIO_pcigrant4_m 	= GPIO_pin10_m,
-+		GPIO_pcigrant4_cfg_v	= GPIO_output_v,
-+
-+	GPIO_pcireq5_b 	= GPIO_pin11_b, 	// PCI Request 5
-+	GPIO_pcireq5_m 	= GPIO_pin11_m,
-+		GPIO_pcireq5_cfg_v	= GPIO_input_v,
-+
-+	GPIO_pcigrant5_b 	= GPIO_pin12_b, 	// PCI Grant 5
-+	GPIO_pcigrant5_m 	= GPIO_pin12_m,
-+		GPIO_pcigrant5_cfg_v	= GPIO_output_v,
-+
-+	GPIO_pcimuintn_b	= GPIO_pin13_b, 	// PCI messaging int.
-+	GPIO_pcimuintn_m	= GPIO_pin13_m,
-+		GPIO_pcimuintn_cfg_v	= GPIO_output_v,
-+
-+} GPIO_DEFS_t;
-+
-+#endif	// __IDT_GPIO_H__
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,199 @@
-+ /**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Definitions for IDT RC32434 CPU
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef _RC32434_H_
-+#define _RC32434_H_
-+
-+#include <linux/config.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+#include <asm/idt-boards/rc32434/rc32434_timer.h>
-+
-+#define RC32434_REG_BASE   0x18000000
-+
-+
-+#define interrupt ((volatile INT_t ) INT0_VirtualAddress)
-+#define idt_timer     ((volatile TIM_t)  TIM0_VirtualAddress)
-+#define idt_gpio	  ((volatile GPIO_t) GPIO0_VirtualAddress)
-+
-+#define IDT_CLOCK_MULT 2
-+#define MIPS_CPU_TIMER_IRQ 7
-+/* Interrupt Controller */
-+#define IC_GROUP0_PEND     (RC32434_REG_BASE + 0x38000)
-+#define IC_GROUP0_MASK     (RC32434_REG_BASE + 0x38008)
-+#define IC_GROUP_OFFSET    0x0C
-+#define RTC_BASE           0xBA001FF0
-+
-+#define NUM_INTR_GROUPS    5
-+/* 16550 UARTs */
-+
-+#define GROUP0_IRQ_BASE 8		/* GRP2 IRQ numbers start here */
-+#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32) /* GRP3 IRQ numbers start here */
-+#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32) /* GRP4 IRQ numbers start here */
-+#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32)	/* GRP5 IRQ numbers start here */
-+#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32)
-+
-+#ifdef __MIPSEB__
-+
-+#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58003)
-+#define EB434_UART1_BASE   (0x19800003)
-+
-+#else
-+
-+#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58000)
-+#define EB434_UART1_BASE   (0x19800000)
-+
-+#endif
-+
-+#define RC32434_UART0_IRQ  GROUP3_IRQ_BASE + 0
-+#define EB434_UART1_IRQ    GROUP4_IRQ_BASE + 11
-+
-+#define RC32434_NR_IRQS  (GROUP4_IRQ_BASE + 32)
-+
-+/* cpu pipeline flush */
-+static inline void rc32434_sync(void)
-+{
-+        __asm__ volatile ("sync");
-+}
-+
-+static inline void rc32434_sync_udelay(int us)
-+{
-+        __asm__ volatile ("sync");
-+        udelay(us);
-+}
-+
-+static inline void rc32434_sync_delay(int ms)
-+{
-+        __asm__ volatile ("sync");
-+        mdelay(ms);
-+}
-+
-+
-+
-+/*
-+ * Macros to access internal RC32434 registers. No byte
-+ * swapping should be done when accessing the internal
-+ * registers.
-+ */
-+
-+#define rc32434_readb __raw_readb
-+#define rc32434_readw __raw_readw
-+#define rc32434_readl __raw_readl
-+
-+#define rc32434_writeb __raw_writeb
-+#define rc32434_writew __raw_writew
-+#define rc32434_writel __raw_writel
-+
-+#if 0
-+static inline u8 rc32434_readb(unsigned long pa)
-+{
-+	return *((volatile u8 *)KSEG1ADDR(pa));
-+}
-+static inline u16 rc32434_readw(unsigned long pa)
-+{
-+	return *((volatile u16 *)KSEG1ADDR(pa));
-+}
-+static inline u32 rc32434_readl(unsigned long pa)
-+{
-+	return *((volatile u32 *)KSEG1ADDR(pa));
-+}
-+static inline void rc32434_writeb(u8 val, unsigned long pa)
-+{
-+	*((volatile u8 *)KSEG1ADDR(pa)) = val;
-+}
-+static inline void rc32434_writew(u16 val, unsigned long pa)
-+{
-+	*((volatile u16 *)KSEG1ADDR(pa)) = val;
-+}
-+static inline void rc32434_writel(u32 val, unsigned long pa)
-+{
-+	*((volatile u32 *)KSEG1ADDR(pa)) = val;
-+}
-+
-+#endif
-+
-+
-+/*
-+ * C access to CLZ and CLO instructions
-+ * (count leading zeroes/ones).
-+ */
-+static inline int rc32434_clz(unsigned long val)
-+{
-+	int ret;
-+        __asm__ volatile (
-+		".set\tnoreorder\n\t"
-+		".set\tnoat\n\t"
-+		".set\tmips32\n\t"
-+		"clz\t%0,%1\n\t"
-+                ".set\tmips0\n\t"
-+                ".set\tat\n\t"
-+                ".set\treorder"
-+                : "=r" (ret)
-+		: "r" (val));
-+
-+	return ret;
-+}
-+static inline int rc32434_clo(unsigned long val)
-+{
-+	int ret;
-+        __asm__ volatile (
-+		".set\tnoreorder\n\t"
-+		".set\tnoat\n\t"
-+		".set\tmips32\n\t"
-+		"clo\t%0,%1\n\t"
-+                ".set\tmips0\n\t"
-+                ".set\tat\n\t"
-+                ".set\treorder"
-+                : "=r" (ret)
-+		: "r" (val));
-+
-+	return ret;
-+}
-+#endif /* _RC32434_H_ */
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_integ.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_integ.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_integ.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_integ.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,90 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   System Integrity register definition
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_INTEG_H__
-+#define __IDT_INTEG_H__
-+
-+enum
-+{
-+	INTEG0_PhysicalAddress	= 0x18030000,
-+	INTEG_PhysicalAddress	= INTEG0_PhysicalAddress,	// Default
-+
-+	INTEG0_VirtualAddress	= 0xB8030000,
-+	INTEG_VirtualAddress	= INTEG0_VirtualAddress,	// Default
-+} ;
-+
-+// if you are looking for CEA, try rst.h
-+typedef struct
-+{
-+	u32 filler [0xc] ;		// 0x30 bytes unused.
-+	u32 errcs ;			// sticky use ERRCS_
-+	u32 wtcount ;			// Watchdog timer count reg.
-+	u32 wtcompare ;			// Watchdog timer timeout value.
-+	u32 wtc ;			// Watchdog timer control. use WTC_
-+} volatile *INTEG_t ;
-+
-+enum
-+{
-+	ERRCS_wto_b		= 0,		// In INTEG_t -> errcs
-+	ERRCS_wto_m		= 0x00000001,
-+	ERRCS_wne_b		= 1,		// In INTEG_t -> errcs
-+	ERRCS_wne_m		= 0x00000002,
-+	ERRCS_ucw_b		= 2,		// In INTEG_t -> errcs
-+	ERRCS_ucw_m		= 0x00000004,
-+	ERRCS_ucr_b		= 3,		// In INTEG_t -> errcs
-+	ERRCS_ucr_m		= 0x00000008,
-+	ERRCS_upw_b		= 4,		// In INTEG_t -> errcs
-+	ERRCS_upw_m		= 0x00000010,
-+	ERRCS_upr_b		= 5,		// In INTEG_t -> errcs
-+	ERRCS_upr_m		= 0x00000020,
-+	ERRCS_udw_b		= 6,		// In INTEG_t -> errcs
-+	ERRCS_udw_m		= 0x00000040,
-+	ERRCS_udr_b		= 7,		// In INTEG_t -> errcs
-+	ERRCS_udr_m		= 0x00000080,
-+	ERRCS_sae_b		= 8,		// In INTEG_t -> errcs
-+	ERRCS_sae_m		= 0x00000100,
-+	ERRCS_wre_b		= 9,		// In INTEG_t -> errcs
-+	ERRCS_wre_m		= 0x00000200,
-+
-+	WTC_en_b		= 0,		// In INTEG_t -> wtc
-+	WTC_en_m		= 0x00000001,
-+	WTC_to_b		= 1,		// In INTEG_t -> wtc
-+	WTC_to_m		= 0x00000002,
-+} ;
-+
-+#endif	// __IDT_INTEG_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_int.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_int.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_int.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_int.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,174 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Interrupt Controller register definition.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_INT_H__
-+#define __IDT_INT_H__
-+
-+enum
-+{
-+	INT0_PhysicalAddress	= 0x18038000,
-+	INT_PhysicalAddress	= INT0_PhysicalAddress,		// Default
-+
-+	INT0_VirtualAddress	= 0xB8038000,
-+	INT_VirtualAddress	= INT0_VirtualAddress,		// Default
-+} ;
-+
-+struct INT_s
-+{
-+	u32		ipend ;		//Pending interrupts. use INT?_
-+	u32		itest ;		//Test bits.		use INT?_
-+	u32		imask ;		//Interrupt disabled when set. use INT?_
-+} ;
-+
-+enum
-+{
-+	IPEND2	= 0,			// HW 2 interrupt to core. use INT2_
-+	IPEND3	= 1,			// HW 3 interrupt to core. use INT3_
-+	IPEND4	= 2,			// HW 4 interrupt to core. use INT4_
-+	IPEND5	= 3,			// HW 5 interrupt to core. use INT5_
-+	IPEND6	= 4,			// HW 6 interrupt to core. use INT6_
-+
-+	IPEND_count,			// must be last (used in loops)
-+	IPEND_min	= IPEND2	// min IPEND (used in loops)
-+};
-+
-+typedef struct INTC_s
-+{
-+	struct INT_s	i [IPEND_count] ;// use i[IPEND?] = INT?_
-+	u32		nmips ;		// use NMIPS_
-+} volatile *INT_t ;
-+
-+enum
-+{
-+	INT2_timer0_b			= 0,
-+	INT2_timer0_m			= 0x00000001,
-+	INT2_timer1_b			= 1,
-+	INT2_timer1_m			= 0x00000002,
-+	INT2_timer2_b			= 2,
-+	INT2_timer2_m			= 0x00000004,
-+	INT2_refresh_b			= 3,
-+	INT2_refresh_m			= 0x00000008,
-+	INT2_watchdogTimeout_b		= 4,
-+	INT2_watchdogTimeout_m		= 0x00000010,
-+	INT2_undecodedCpuWrite_b	= 5,
-+	INT2_undecodedCpuWrite_m	= 0x00000020,
-+	INT2_undecodedCpuRead_b		= 6,
-+	INT2_undecodedCpuRead_m		= 0x00000040,
-+	INT2_undecodedPciWrite_b	= 7,
-+	INT2_undecodedPciWrite_m	= 0x00000080,
-+	INT2_undecodedPciRead_b		= 8,
-+	INT2_undecodedPciRead_m		= 0x00000100,
-+	INT2_undecodedDmaWrite_b	= 9,
-+	INT2_undecodedDmaWrite_m	= 0x00000200,
-+	INT2_undecodedDmaRead_b		= 10,
-+	INT2_undecodedDmaRead_m		= 0x00000400,
-+	INT2_ipBusSlaveAckError_b	= 11,
-+	INT2_ipBusSlaveAckError_m	= 0x00000800,
-+
-+	INT3_dmaChannel0_b		= 0,
-+	INT3_dmaChannel0_m		= 0x00000001,
-+	INT3_dmaChannel1_b		= 1,
-+	INT3_dmaChannel1_m		= 0x00000002,
-+	INT3_dmaChannel2_b		= 2,
-+	INT3_dmaChannel2_m		= 0x00000004,
-+	INT3_dmaChannel3_b		= 3,
-+	INT3_dmaChannel3_m		= 0x00000008,
-+	INT3_dmaChannel4_b		= 4,
-+	INT3_dmaChannel4_m		= 0x00000010,
-+	INT3_dmaChannel5_b		= 5,
-+	INT3_dmaChannel5_m		= 0x00000020,
-+
-+	INT5_uartGeneral0_b		= 0,
-+	INT5_uartGeneral0_m		= 0x00000001,
-+	INT5_uartTxrdy0_b		= 1,
-+	INT5_uartTxrdy0_m		= 0x00000002,
-+	INT5_uartRxrdy0_b		= 2,
-+	INT5_uartRxrdy0_m		= 0x00000004,
-+	INT5_pci_b			= 3,
-+	INT5_pci_m			= 0x00000008,
-+	INT5_pciDecoupled_b		= 4,
-+	INT5_pciDecoupled_m		= 0x00000010,
-+	INT5_spi_b			= 5,
-+	INT5_spi_m			= 0x00000020,
-+	INT5_deviceDecoupled_b		= 6,
-+	INT5_deviceDecoupled_m		= 0x00000040,
-+	INT5_eth0Ovr_b			= 9,
-+	INT5_eth0Ovr_m			= 0x00000200,
-+	INT5_eth0Und_b			= 10,
-+	INT5_eth0Und_m			= 0x00000400,
-+	INT5_eth0Pfd_b			= 11,
-+	INT5_eth0Pfd_m			= 0x00000800,
-+	INT5_nvram_b			= 12,
-+	INT5_nvram_m			= 0x00001000,
-+
-+	INT6_gpio0_b			= 0,
-+	INT6_gpio0_m			= 0x00000001,
-+	INT6_gpio1_b			= 1,
-+	INT6_gpio1_m			= 0x00000002,
-+	INT6_gpio2_b			= 2,
-+	INT6_gpio2_m			= 0x00000004,
-+	INT6_gpio3_b			= 3,
-+	INT6_gpio3_m			= 0x00000008,
-+	INT6_gpio4_b			= 4,
-+	INT6_gpio4_m			= 0x00000010,
-+	INT6_gpio5_b			= 5,
-+	INT6_gpio5_m			= 0x00000020,
-+	INT6_gpio6_b			= 6,
-+	INT6_gpio6_m			= 0x00000040,
-+	INT6_gpio7_b			= 7,
-+	INT6_gpio7_m			= 0x00000080,
-+	INT6_gpio8_b			= 8,
-+	INT6_gpio8_m			= 0x00000100,
-+	INT6_gpio9_b			= 9,
-+	INT6_gpio9_m			= 0x00000200,
-+	INT6_gpio10_b			= 10,
-+	INT6_gpio10_m			= 0x00000400,
-+	INT6_gpio11_b			= 11,
-+	INT6_gpio11_m			= 0x00000800,
-+	INT6_gpio12_b			= 12,
-+	INT6_gpio12_m			= 0x00001000,
-+	INT6_gpio13_b			= 13,
-+	INT6_gpio13_m			= 0x00002000,
-+
-+	NMIPS_gpio_b			= 0,
-+	NMIPS_gpio_m			= 0x00000001,
-+} ;
-+
-+#endif	// __IDT_INT_H__
-+
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_iparb.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_iparb.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_iparb.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_iparb.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,111 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   IP Arbiter register definitions
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt,neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_IPARB_H__
-+#define __IDT_IPARB_H__
-+
-+enum
-+{
-+	IPARB0_PhysicalAddress	= 0x18048000,
-+	IPARB_PhysicalAddress	= IPARB0_PhysicalAddress,	// Default
-+
-+	IPARB0_VirtualAddress	= 0xB8048000,
-+	IPARB_VirtualAddress	= IPARB0_VirtualAddress,	// Default
-+} ;
-+
-+enum
-+{
-+	IPABMXC_ethernet0Receive	= 0,
-+	IPABMXC_ethernet0Transmit	= 1,
-+	IPABMXC_memoryToHoldFifo	= 2,
-+	IPABMXC_holdFifoToMemory	= 3,
-+	IPABMXC_pciToMemory		= 4,
-+	IPABMXC_memoryToPci		= 5,
-+	IPABMXC_pciTarget		= 6,
-+	IPABMXC_pciTargetStart		= 7,
-+	IPABMXC_cpuToIpBus		= 8,
-+
-+	IPABMXC_Count,				// Must be last in list !
-+	IPABMXC_Min			= IPABMXC_ethernet0Receive,
-+
-+	IPAPXC_PriorityCount	= 4,		// 3-highest, 0-lowest.
-+} ;
-+
-+typedef struct
-+{
-+	u32	ipapc [IPAPXC_PriorityCount] ;	// ipapc[IPAPXC_] = IPAPC_
-+	u32	ipabmc [IPABMXC_Count] ;	// ipabmc[IPABMXC_] = IPABMC_
-+	u32	ipac ;				// use IPAC_
-+	u32	ipaitcc;			// use IPAITCC_
-+	u32	ipaspare ;
-+} volatile * IPARB_t ;
-+
-+enum
-+{
-+	IPAC_dp_b			= 0,
-+	IPAC_dp_m			= 0x00000001,
-+	IPAC_dep_b			= 1,
-+	IPAC_dep_m			= 0x00000002,
-+	IPAC_drm_b			= 2,
-+	IPAC_drm_m			= 0x00000004,
-+	IPAC_dwm_b			= 3,
-+	IPAC_dwm_m			= 0x00000008,
-+	IPAC_msk_b			= 4,
-+	IPAC_msk_m			= 0x00000010,
-+
-+	IPAPC_ptc_b			= 0,
-+	IPAPC_ptc_m			= 0x00003fff,
-+	IPAPC_mf_b			= 14,
-+	IPAPC_mf_m			= 0x00004000,
-+	IPAPC_cptc_b			= 16,
-+	IPAPC_cptc_m			= 0x3fff0000,
-+
-+	IPAITCC_itcc			= 0,
-+	IPAITCC_itcc,			= 0x000001ff,
-+
-+	IPABMC_mtc_b			= 0,
-+	IPABMC_mtc_m			= 0x00000fff,
-+	IPABMC_p_b			= 12,
-+	IPABMC_p_m			= 0x00003000,
-+	IPABMC_msk_b			= 14,
-+	IPABMC_msk_m			= 0x00004000,
-+	IPABMC_cmtc_b			= 16,
-+	IPABMC_cmtc_m			= 0x0fff0000,
-+};
-+
-+#endif	// __IDT_IPARB_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_pci.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_pci.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_pci.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_pci.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,695 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   PCI register definitio
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_PCI_H__
-+#define __IDT_PCI_H__
-+
-+enum
-+{
-+	PCI0_PhysicalAddress	= 0x18080000,
-+	PCI_PhysicalAddress	= PCI0_PhysicalAddress,
-+
-+	PCI0_VirtualAddress	= 0xB8080000,
-+	PCI_VirtualAddress	= PCI0_VirtualAddress,
-+} ;
-+
-+enum
-+{
-+	PCI_LbaCount	= 4,		// Local base addresses.
-+} ;
-+
-+typedef struct
-+{
-+	u32	a ;		// Address.
-+	u32	c ;		// Control.
-+	u32	m ;		// mapping.
-+} PCI_Map_s ;
-+
-+typedef struct
-+{
-+	u32		pcic ;
-+	u32		pcis ;
-+	u32		pcism ;
-+	u32		pcicfga ;
-+	u32		pcicfgd ;
-+	PCI_Map_s	pcilba [PCI_LbaCount] ;
-+	u32		pcidac ;
-+	u32		pcidas ;
-+	u32		pcidasm ;
-+	u32		pcidad ;
-+	u32		pcidma8c ;
-+	u32		pcidma9c ;
-+	u32		pcitc ;
-+} volatile *PCI_t ;
-+
-+// PCI messaging unit.
-+enum
-+{
-+	PCIM_Count	= 2,
-+} ;
-+typedef struct
-+{
-+	u32		pciim [PCIM_Count] ;
-+	u32		pciom [PCIM_Count] ;
-+	u32		pciid ;
-+	u32		pciiic ;
-+	u32		pciiim ;
-+	u32		pciiod ;
-+	u32		pciioic ;
-+	u32		pciioim ;
-+} volatile *PCIM_t ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Control Register
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCIC_en_b	= 0,
-+	PCIC_en_m	= 0x00000001,
-+	PCIC_tnr_b	= 1,
-+	PCIC_tnr_m	= 0x00000002,
-+	PCIC_sce_b	= 2,
-+	PCIC_sce_m	= 0x00000004,
-+	PCIC_ien_b	= 3,
-+	PCIC_ien_m	= 0x00000008,
-+	PCIC_aaa_b	= 4,
-+	PCIC_aaa_m	= 0x00000010,
-+	PCIC_eap_b	= 5,
-+	PCIC_eap_m	= 0x00000020,
-+	PCIC_pcim_b	= 6,
-+	PCIC_pcim_m	= 0x000001c0,
-+		PCIC_pcim_disabled_v	= 0,
-+		PCIC_pcim_tnr_v 	= 1,	// Satellite - target not ready
-+		PCIC_pcim_suspend_v	= 2,	// Satellite - suspended CPU.
-+		PCIC_pcim_extern_v	= 3,	// Host - external arbiter.
-+		PCIC_pcim_fixed_v	= 4,	// Host - fixed priority arb.
-+		PCIC_pcim_roundrobin_v	= 5,	// Host - round robin priority.
-+		PCIC_pcim_reserved6_v	= 6,
-+		PCIC_pcim_reserved7_v	= 7,
-+	PCIC_igm_b	= 9,
-+	PCIC_igm_m	= 0x00000200,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Status Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCIS_eed_b	= 0,
-+	PCIS_eed_m	= 0x00000001,
-+	PCIS_wr_b	= 1,
-+	PCIS_wr_m	= 0x00000002,
-+	PCIS_nmi_b	= 2,
-+	PCIS_nmi_m	= 0x00000004,
-+	PCIS_ii_b	= 3,
-+	PCIS_ii_m	= 0x00000008,
-+	PCIS_cwe_b	= 4,
-+	PCIS_cwe_m	= 0x00000010,
-+	PCIS_cre_b	= 5,
-+	PCIS_cre_m	= 0x00000020,
-+	PCIS_mdpe_b	= 6,
-+	PCIS_mdpe_m	= 0x00000040,
-+	PCIS_sta_b	= 7,
-+	PCIS_sta_m	= 0x00000080,
-+	PCIS_rta_b	= 8,
-+	PCIS_rta_m	= 0x00000100,
-+	PCIS_rma_b	= 9,
-+	PCIS_rma_m	= 0x00000200,
-+	PCIS_sse_b	= 10,
-+	PCIS_sse_m	= 0x00000400,
-+	PCIS_ose_b	= 11,
-+	PCIS_ose_m	= 0x00000800,
-+	PCIS_pe_b	= 12,
-+	PCIS_pe_m	= 0x00001000,
-+	PCIS_tae_b	= 13,
-+	PCIS_tae_m	= 0x00002000,
-+	PCIS_rle_b	= 14,
-+	PCIS_rle_m	= 0x00004000,
-+	PCIS_bme_b	= 15,
-+	PCIS_bme_m	= 0x00008000,
-+	PCIS_prd_b	= 16,
-+	PCIS_prd_m	= 0x00010000,
-+	PCIS_rip_b	= 17,
-+	PCIS_rip_m	= 0x00020000,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Status Mask Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCISM_eed_b		= 0,
-+	PCISM_eed_m		= 0x00000001,
-+	PCISM_wr_b		= 1,
-+	PCISM_wr_m		= 0x00000002,
-+	PCISM_nmi_b		= 2,
-+	PCISM_nmi_m		= 0x00000004,
-+	PCISM_ii_b		= 3,
-+	PCISM_ii_m		= 0x00000008,
-+	PCISM_cwe_b		= 4,
-+	PCISM_cwe_m		= 0x00000010,
-+	PCISM_cre_b		= 5,
-+	PCISM_cre_m		= 0x00000020,
-+	PCISM_mdpe_b		= 6,
-+	PCISM_mdpe_m		= 0x00000040,
-+	PCISM_sta_b		= 7,
-+	PCISM_sta_m		= 0x00000080,
-+	PCISM_rta_b		= 8,
-+	PCISM_rta_m		= 0x00000100,
-+	PCISM_rma_b		= 9,
-+	PCISM_rma_m		= 0x00000200,
-+	PCISM_sse_b		= 10,
-+	PCISM_sse_m		= 0x00000400,
-+	PCISM_ose_b		= 11,
-+	PCISM_ose_m		= 0x00000800,
-+	PCISM_pe_b		= 12,
-+	PCISM_pe_m		= 0x00001000,
-+	PCISM_tae_b		= 13,
-+	PCISM_tae_m		= 0x00002000,
-+	PCISM_rle_b		= 14,
-+	PCISM_rle_m		= 0x00004000,
-+	PCISM_bme_b		= 15,
-+	PCISM_bme_m		= 0x00008000,
-+	PCISM_prd_b		= 16,
-+	PCISM_prd_m		= 0x00010000,
-+	PCISM_rip_b		= 17,
-+	PCISM_rip_m		= 0x00020000,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Configuration Address Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCICFGA_reg_b		= 2,
-+	PCICFGA_reg_m		= 0x000000fc,
-+		PCICFGA_reg_id_v	= 0x00>>2, //use PCFGID_
-+		PCICFGA_reg_04_v	= 0x04>>2, //use PCFG04_
-+		PCICFGA_reg_08_v	= 0x08>>2, //use PCFG08_
-+		PCICFGA_reg_0C_v	= 0x0C>>2, //use PCFG0C_
-+		PCICFGA_reg_pba0_v	= 0x10>>2, //use PCIPBA_
-+		PCICFGA_reg_pba1_v	= 0x14>>2, //use PCIPBA_
-+		PCICFGA_reg_pba2_v	= 0x18>>2, //use PCIPBA_
-+		PCICFGA_reg_pba3_v	= 0x1c>>2, //use PCIPBA_
-+		PCICFGA_reg_subsystem_v = 0x2c>>2, //use PCFGSS_
-+		PCICFGA_reg_3C_v	= 0x3C>>2, //use PCFG3C_
-+		PCICFGA_reg_pba0c_v	= 0x44>>2, //use PCIPBAC_
-+		PCICFGA_reg_pba0m_v	= 0x48>>2,
-+		PCICFGA_reg_pba1c_v	= 0x4c>>2, //use PCIPBAC_
-+		PCICFGA_reg_pba1m_v	= 0x50>>2,
-+		PCICFGA_reg_pba2c_v	= 0x54>>2, //use PCIPBAC_
-+		PCICFGA_reg_pba2m_v	= 0x58>>2,
-+		PCICFGA_reg_pba3c_v	= 0x5c>>2, //use PCIPBAC_
-+		PCICFGA_reg_pba3m_v	= 0x60>>2,
-+		PCICFGA_reg_pmgt_v	= 0x64>>2,
-+	PCICFGA_func_b		= 8,
-+	PCICFGA_func_m		= 0x00000700,
-+	PCICFGA_dev_b		= 11,
-+	PCICFGA_dev_m		= 0x0000f800,
-+		PCICFGA_dev_internal_v	= 0,
-+	PCICFGA_bus_b		= 16,
-+	PCICFGA_bus_m		= 0x00ff0000,
-+		PCICFGA_bus_type0_v	= 0,	//local bus
-+	PCICFGA_en_b		= 31,		// read only
-+	PCICFGA_en_m		= 0x80000000,
-+} ;
-+
-+enum {
-+	PCFGID_vendor_b 	= 0,
-+	PCFGID_vendor_m 	= 0x0000ffff,
-+		PCFGID_vendor_IDT_v		= 0x111d,
-+	PCFGID_device_b 	= 16,
-+	PCFGID_device_m 	= 0xffff0000,
-+		PCFGID_device_Korinade_v	= 0x0214,
-+
-+	PCFG04_command_ioena_b		= 1,
-+	PCFG04_command_ioena_m		= 0x00000001,
-+	PCFG04_command_memena_b 	= 2,
-+	PCFG04_command_memena_m 	= 0x00000002,
-+	PCFG04_command_bmena_b		= 3,
-+	PCFG04_command_bmena_m		= 0x00000004,
-+	PCFG04_command_mwinv_b		= 5,
-+	PCFG04_command_mwinv_m		= 0x00000010,
-+	PCFG04_command_parena_b 	= 7,
-+	PCFG04_command_parena_m 	= 0x00000040,
-+	PCFG04_command_serrena_b	= 9,
-+	PCFG04_command_serrena_m	= 0x00000100,
-+	PCFG04_command_fastbbena_b	= 10,
-+	PCFG04_command_fastbbena_m	= 0x00000200,
-+	PCFG04_status_b 		= 16,
-+	PCFG04_status_m 		= 0xffff0000,
-+	PCFG04_status_66MHz_b		= 21,	// 66 MHz enable
-+	PCFG04_status_66MHz_m		= 0x00200000,
-+	PCFG04_status_fbb_b		= 23,
-+	PCFG04_status_fbb_m		= 0x00800000,
-+	PCFG04_status_mdpe_b		= 24,
-+	PCFG04_status_mdpe_m		= 0x01000000,
-+	PCFG04_status_dst_b		= 25,
-+	PCFG04_status_dst_m		= 0x06000000,
-+	PCFG04_status_sta_b		= 27,
-+	PCFG04_status_sta_m		= 0x08000000,
-+	PCFG04_status_rta_b		= 28,
-+	PCFG04_status_rta_m		= 0x10000000,
-+	PCFG04_status_rma_b		= 29,
-+	PCFG04_status_rma_m		= 0x20000000,
-+	PCFG04_status_sse_b		= 30,
-+	PCFG04_status_sse_m		= 0x40000000,
-+	PCFG04_status_pe_b		= 31,
-+	PCFG04_status_pe_m		= 0x40000000,
-+
-+	PCFG08_revId_b			= 0,
-+	PCFG08_revId_m			= 0x000000ff,
-+	PCFG08_classCode_b		= 0,
-+	PCFG08_classCode_m		= 0xffffff00,
-+		PCFG08_classCode_bridge_v	= 06,
-+		PCFG08_classCode_proc_v 	= 0x0b3000, // processor-MIPS
-+	PCFG0C_cacheline_b		= 0,
-+	PCFG0C_cacheline_m		= 0x000000ff,
-+	PCFG0C_masterLatency_b		= 8,
-+	PCFG0C_masterLatency_m		= 0x0000ff00,
-+	PCFG0C_headerType_b		= 16,
-+	PCFG0C_headerType_m		= 0x00ff0000,
-+	PCFG0C_bist_b			= 24,
-+	PCFG0C_bist_m			= 0xff000000,
-+
-+	PCIPBA_msi_b			= 0,
-+	PCIPBA_msi_m			= 0x00000001,
-+	PCIPBA_p_b			= 3,
-+	PCIPBA_p_m			= 0x00000004,
-+	PCIPBA_baddr_b			= 8,
-+	PCIPBA_baddr_m			= 0xffffff00,
-+
-+	PCFGSS_vendorId_b		= 0,
-+	PCFGSS_vendorId_m		= 0x0000ffff,
-+	PCFGSS_id_b			= 16,
-+	PCFGSS_id_m			= 0xffff0000,
-+
-+	PCFG3C_interruptLine_b		= 0,
-+	PCFG3C_interruptLine_m		= 0x000000ff,
-+	PCFG3C_interruptPin_b		= 8,
-+	PCFG3C_interruptPin_m		= 0x0000ff00,
-+	PCFG3C_minGrant_b		= 16,
-+	PCFG3C_minGrant_m		= 0x00ff0000,
-+	PCFG3C_maxLat_b 		= 24,
-+	PCFG3C_maxLat_m 		= 0xff000000,
-+
-+	PCIPBAC_msi_b			= 0,
-+	PCIPBAC_msi_m			= 0x00000001,
-+	PCIPBAC_p_b			= 1,
-+	PCIPBAC_p_m			= 0x00000002,
-+	PCIPBAC_size_b			= 2,
-+	PCIPBAC_size_m			= 0x0000007c,
-+	PCIPBAC_sb_b			= 7,
-+	PCIPBAC_sb_m			= 0x00000080,
-+	PCIPBAC_pp_b			= 8,
-+	PCIPBAC_pp_m			= 0x00000100,
-+	PCIPBAC_mr_b			= 9,
-+	PCIPBAC_mr_m			= 0x00000600,
-+		PCIPBAC_mr_read_v	=0,	//no prefetching
-+		PCIPBAC_mr_readLine_v	=1,
-+		PCIPBAC_mr_readMult_v	=2,
-+	PCIPBAC_mrl_b			= 11,
-+	PCIPBAC_mrl_m			= 0x00000800,
-+	PCIPBAC_mrm_b			= 12,
-+	PCIPBAC_mrm_m			= 0x00001000,
-+	PCIPBAC_trp_b			= 13,
-+	PCIPBAC_trp_m			= 0x00002000,
-+
-+	PCFG40_trdyTimeout_b		= 0,
-+	PCFG40_trdyTimeout_m		= 0x000000ff,
-+	PCFG40_retryLim_b		= 8,
-+	PCFG40_retryLim_m		= 0x0000ff00,
-+};
-+
-+/*******************************************************************************
-+ *
-+ * PCI Local Base Address [0|1|2|3] Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCILBA_baddr_b		= 0,		// In PCI_t -> pcilba [] .a
-+	PCILBA_baddr_m		= 0xffffff00,
-+} ;
-+/*******************************************************************************
-+ *
-+ * PCI Local Base Address Control Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCILBAC_msi_b		= 0,		// In pPci->pcilba[i].c
-+	PCILBAC_msi_m		= 0x00000001,
-+		PCILBAC_msi_mem_v	= 0,
-+		PCILBAC_msi_io_v	= 1,
-+	PCILBAC_size_b		= 2,	// In pPci->pcilba[i].c
-+	PCILBAC_size_m		= 0x0000007c,
-+	PCILBAC_sb_b		= 7,	// In pPci->pcilba[i].c
-+	PCILBAC_sb_m		= 0x00000080,
-+	PCILBAC_rt_b		= 8,	// In pPci->pcilba[i].c
-+	PCILBAC_rt_m		= 0x00000100,
-+		PCILBAC_rt_noprefetch_v = 0, // mem read
-+		PCILBAC_rt_prefetch_v	= 1, // mem readline
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Local Base Address [0|1|2|3] Mapping Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCILBAM_maddr_b 	= 8,
-+	PCILBAM_maddr_m 	= 0xffffff00,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Decoupled Access Control Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCIDAC_den_b		= 0,
-+	PCIDAC_den_m		= 0x00000001,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Decoupled Access Status Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCIDAS_d_b	= 0,
-+	PCIDAS_d_m	= 0x00000001,
-+	PCIDAS_b_b	= 1,
-+	PCIDAS_b_m	= 0x00000002,
-+	PCIDAS_e_b	= 2,
-+	PCIDAS_e_m	= 0x00000004,
-+	PCIDAS_ofe_b	= 3,
-+	PCIDAS_ofe_m	= 0x00000008,
-+	PCIDAS_off_b	= 4,
-+	PCIDAS_off_m	= 0x00000010,
-+	PCIDAS_ife_b	= 5,
-+	PCIDAS_ife_m	= 0x00000020,
-+	PCIDAS_iff_b	= 6,
-+	PCIDAS_iff_m	= 0x00000040,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI DMA Channel 8 Configuration Register
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCIDMA8C_mbs_b	= 0,		// Maximum Burst Size.
-+	PCIDMA8C_mbs_m	= 0x00000fff,	// { pcidma8c }
-+	PCIDMA8C_our_b	= 12,		// Optimize Unaligned Burst Reads.
-+	PCIDMA8C_our_m	= 0x00001000,	// { pcidma8c }
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI DMA Channel 9 Configuration Register
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCIDMA9C_mbs_b	= 0,		// Maximum Burst Size.
-+	PCIDMA9C_mbs_m	= 0x00000fff, // { pcidma9c }
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCIDMAD_pt_b		= 22,		// in DEVCMD field (descriptor)
-+	PCIDMAD_pt_m		= 0x00c00000,	// preferred transaction field
-+		// These are for reads (DMA channel 8)
-+		PCIDMAD_devcmd_mr_v	= 0,	//memory read
-+		PCIDMAD_devcmd_mrl_v	= 1,	//memory read line
-+		PCIDMAD_devcmd_mrm_v	= 2,	//memory read multiple
-+		PCIDMAD_devcmd_ior_v	= 3,	//I/O read
-+		// These are for writes (DMA channel 9)
-+		PCIDMAD_devcmd_mw_v	= 0,	//memory write
-+		PCIDMAD_devcmd_mwi_v	= 1,	//memory write invalidate
-+		PCIDMAD_devcmd_iow_v	= 3,	//I/O write
-+
-+	// Swap byte field applies to both DMA channel 8 and 9
-+	PCIDMAD_sb_b		= 24,		// in DEVCMD field (descriptor)
-+	PCIDMAD_sb_m		= 0x01000000,	// swap byte field
-+} ;
-+
-+
-+/*******************************************************************************
-+ *
-+ * PCI Target Control Register
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCITC_rtimer_b		= 0,		// In PCITC_t -> pcitc
-+	PCITC_rtimer_m		= 0x000000ff,
-+	PCITC_dtimer_b		= 8,		// In PCITC_t -> pcitc
-+	PCITC_dtimer_m		= 0x0000ff00,
-+	PCITC_rdr_b		= 18,		// In PCITC_t -> pcitc
-+	PCITC_rdr_m		= 0x00040000,
-+	PCITC_ddt_b		= 19,		// In PCITC_t -> pcitc
-+	PCITC_ddt_m		= 0x00080000,
-+} ;
-+/*******************************************************************************
-+ *
-+ * PCI messaging unit [applies to both inbound and outbound registers ]
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCIM_m0_b	= 0,		// In PCIM_t -> {pci{iic,iim,ioic,ioim}}
-+	PCIM_m0_m	= 0x00000001,	// inbound or outbound message 0
-+	PCIM_m1_b	= 1,		// In PCIM_t -> {pci{iic,iim,ioic,ioim}}
-+	PCIM_m1_m	= 0x00000002,	// inbound or outbound message 1
-+	PCIM_db_b	= 2,		// In PCIM_t -> {pci{iic,iim,ioic,ioim}}
-+	PCIM_db_m	= 0x00000004,	// inbound or outbound doorbell
-+};
-+
-+
-+
-+
-+
-+
-+#define PCI_MSG_VirtualAddress	     0xB8088010
-+#define rc32434_pci ((volatile PCI_t) PCI0_VirtualAddress)
-+#define rc32434_pci_msg ((volatile PCIM_t) PCI_MSG_VirtualAddress)
-+
-+#define PCIM_SHFT		0x6
-+#define PCIM_BIT_LEN		0x7
-+#define PCIM_H_EA		0x3
-+#define PCIM_H_IA_FIX		0x4
-+#define PCIM_H_IA_RR		0x5
-+#if 0
-+#define PCI_ADDR_START		0x13000000
-+#endif
-+
-+#define PCI_ADDR_START		0x50000000
-+
-+#define CPUTOPCI_MEM_WIN	0x02000000
-+#define CPUTOPCI_IO_WIN		0x00100000
-+#define PCILBA_SIZE_SHFT	2
-+#define PCILBA_SIZE_MASK	0x1F
-+#define SIZE_256MB		0x1C
-+#define SIZE_128MB		0x1B
-+#define SIZE_64MB               0x1A
-+#define SIZE_32MB		0x19
-+#define SIZE_16MB               0x18
-+#define SIZE_4MB		0x16
-+#define SIZE_2MB		0x15
-+#define SIZE_1MB		0x14
-+#define KORINA_CONFIG0_ADDR	0x80000000
-+#define KORINA_CONFIG1_ADDR	0x80000004
-+#define KORINA_CONFIG2_ADDR	0x80000008
-+#define KORINA_CONFIG3_ADDR	0x8000000C
-+#define KORINA_CONFIG4_ADDR	0x80000010
-+#define KORINA_CONFIG5_ADDR	0x80000014
-+#define KORINA_CONFIG6_ADDR	0x80000018
-+#define KORINA_CONFIG7_ADDR	0x8000001C
-+#define KORINA_CONFIG8_ADDR	0x80000020
-+#define KORINA_CONFIG9_ADDR	0x80000024
-+#define KORINA_CONFIG10_ADDR	0x80000028
-+#define KORINA_CONFIG11_ADDR	0x8000002C
-+#define KORINA_CONFIG12_ADDR	0x80000030
-+#define KORINA_CONFIG13_ADDR	0x80000034
-+#define KORINA_CONFIG14_ADDR	0x80000038
-+#define KORINA_CONFIG15_ADDR	0x8000003C
-+#define KORINA_CONFIG16_ADDR	0x80000040
-+#define KORINA_CONFIG17_ADDR	0x80000044
-+#define KORINA_CONFIG18_ADDR	0x80000048
-+#define KORINA_CONFIG19_ADDR	0x8000004C
-+#define KORINA_CONFIG20_ADDR	0x80000050
-+#define KORINA_CONFIG21_ADDR	0x80000054
-+#define KORINA_CONFIG22_ADDR	0x80000058
-+#define KORINA_CONFIG23_ADDR	0x8000005C
-+#define KORINA_CONFIG24_ADDR	0x80000060
-+#define KORINA_CONFIG25_ADDR	0x80000064
-+#define KORINA_CMD 		(PCFG04_command_ioena_m | \
-+				 PCFG04_command_memena_m | \
-+				 PCFG04_command_bmena_m | \
-+				 PCFG04_command_mwinv_m | \
-+				 PCFG04_command_parena_m | \
-+				 PCFG04_command_serrena_m )
-+
-+#define KORINA_STAT		(PCFG04_status_mdpe_m | \
-+				 PCFG04_status_sta_m  | \
-+				 PCFG04_status_rta_m  | \
-+				 PCFG04_status_rma_m  | \
-+				 PCFG04_status_sse_m  | \
-+				 PCFG04_status_pe_m)
-+
-+#define KORINA_CNFG1		((KORINA_STAT<<16)|KORINA_CMD)
-+
-+#define KORINA_REVID		0
-+#define KORINA_CLASS_CODE	0
-+#define KORINA_CNFG2		((KORINA_CLASS_CODE<<8) | \
-+				  KORINA_REVID)
-+
-+#define KORINA_CACHE_LINE_SIZE	4
-+#define KORINA_MASTER_LAT	0x3c
-+#define KORINA_HEADER_TYPE	0
-+#define KORINA_BIST		0
-+
-+#define KORINA_CNFG3 ((KORINA_BIST << 24) | \
-+		      (KORINA_HEADER_TYPE<<16) | \
-+		      (KORINA_MASTER_LAT<<8) | \
-+		      KORINA_CACHE_LINE_SIZE )
-+
-+#define KORINA_BAR0	0x00000008 /* 128 MB Memory */
-+#define KORINA_BAR1	0x18800001 /* 1 MB IO */
-+#define KORINA_BAR2	0x18000001 /* 2 MB IO window for Korina
-+					internal Registers */
-+#define KORINA_BAR3	0x48000008 /* Spare 128 MB Memory */
-+
-+#define KORINA_CNFG4	KORINA_BAR0
-+#define KORINA_CNFG5    KORINA_BAR1
-+#define KORINA_CNFG6 	KORINA_BAR2
-+#define KORINA_CNFG7	KORINA_BAR3
-+
-+#define KORINA_SUBSYS_VENDOR_ID 0x011d
-+#define KORINA_SUBSYSTEM_ID	0x0214
-+#define KORINA_CNFG8		0
-+#define KORINA_CNFG9		0
-+#define KORINA_CNFG10		0
-+#define KORINA_CNFG11 	((KORINA_SUBSYS_VENDOR_ID<<16) | \
-+			  KORINA_SUBSYSTEM_ID)
-+#define KORINA_INT_LINE		1
-+#define KORINA_INT_PIN		1
-+#define KORINA_MIN_GNT		8
-+#define KORINA_MAX_LAT		0x38
-+#define KORINA_CNFG12		0
-+#define KORINA_CNFG13 		0
-+#define KORINA_CNFG14		0
-+#define KORINA_CNFG15	((KORINA_MAX_LAT<<24) | \
-+			 (KORINA_MIN_GNT<<16) | \
-+			 (KORINA_INT_PIN<<8)  | \
-+			  KORINA_INT_LINE)
-+#define	KORINA_RETRY_LIMIT	0x80
-+#define KORINA_TRDY_LIMIT	0x80
-+#define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \
-+			KORINA_TRDY_LIMIT)
-+#define PCI_PBAxC_R		0x0
-+#define PCI_PBAxC_RL		0x1
-+#define PCI_PBAxC_RM		0x2
-+#define SIZE_SHFT		2
-+
-+#if defined(__MIPSEB__)
-+#define KORINA_PBA0C	( PCIPBAC_mrl_m | PCIPBAC_sb_m | \
-+			  ((PCI_PBAxC_RM &0x3) << PCIPBAC_mr_b) | \
-+			  PCIPBAC_pp_m | \
-+			  (SIZE_128MB<<SIZE_SHFT) | \
-+			   PCIPBAC_p_m)
-+#else
-+#define KORINA_PBA0C	( PCIPBAC_mrl_m | \
-+			  ((PCI_PBAxC_RM &0x3) << PCIPBAC_mr_b) | \
-+			  PCIPBAC_pp_m | \
-+			  (SIZE_128MB<<SIZE_SHFT) | \
-+			   PCIPBAC_p_m)
-+#endif
-+#define KORINA_CNFG17	KORINA_PBA0C
-+#define KORINA_PBA0M	0x0
-+#define KORINA_CNFG18	KORINA_PBA0M
-+
-+#if defined(__MIPSEB__)
-+#define KORINA_PBA1C	((SIZE_1MB<<SIZE_SHFT) | PCIPBAC_sb_m | \
-+			  PCIPBAC_msi_m)
-+#else
-+#define KORINA_PBA1C	((SIZE_1MB<<SIZE_SHFT) | \
-+			  PCIPBAC_msi_m)
-+#endif
-+#define KORINA_CNFG19	KORINA_PBA1C
-+#define KORINA_PBA1M	0x0
-+#define KORINA_CNFG20	KORINA_PBA1M
-+
-+#if defined(__MIPSEB__)
-+#define KORINA_PBA2C	((SIZE_2MB<<SIZE_SHFT) | PCIPBAC_sb_m | \
-+			  PCIPBAC_msi_m)
-+#else
-+#define KORINA_PBA2C	((SIZE_2MB<<SIZE_SHFT) | \
-+			  PCIPBAC_msi_m)
-+#endif
-+#define KORINA_CNFG21	KORINA_PBA2C
-+#define KORINA_PBA2M	0x18000000
-+#define KORINA_CNFG22	KORINA_PBA2M
-+#define KORINA_PBA3C	0
-+#define KORINA_CNFG23	KORINA_PBA3C
-+#define KORINA_PBA3M	0
-+#define KORINA_CNFG24	KORINA_PBA3M
-+
-+
-+
-+#define	PCITC_DTIMER_VAL	8
-+#define PCITC_RTIMER_VAL	0x10
-+
-+
-+
-+
-+#endif	// __IDT_PCI_H__
-+
-+
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_rst.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_rst.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_rst.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_rst.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,119 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Reset register definitions.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_RST_H__
-+#define __IDT_RST_H__
-+
-+enum
-+{
-+	RST0_PhysicalAddress	= 0x18000000,
-+	RST_PhysicalAddress	= RST0_PhysicalAddress,		// Default
-+
-+	RST0_VirtualAddress	= 0xb8000000,
-+	RST_VirtualAddress	= RST0_VirtualAddress,		// Default
-+} ;
-+
-+typedef struct RST_s
-+{
-+	u32	filler [0x0006] ;
-+	u32	sysid ;
-+	u32	filler2 [0x2000-8] ;		// Pad out to offset 0x8000
-+	u32	reset ;
-+	u32	bcv ;
-+	u32	cea ;
-+} volatile * RST_t ;
-+
-+enum
-+{
-+	SYSID_rev_b		= 0,
-+	SYSID_rev_m		= 0x000000ff,
-+	SYSID_imp_b		= 8,
-+	SYSID_imp_m		= 0x000fff00,
-+	SYSID_vendor_b		= 8,
-+	SYSID_vendor_m		= 0xfff00000,
-+
-+	BCV_pll_b		= 0,
-+	BCV_pll_m		= 0x0000000f,
-+		BCV_pll_PLLBypass_v	= 0x0,	// PCLK=1*CLK.
-+		BCV_pll_Mul3_v		= 0x1,	// PCLK=3*CLK.
-+		BCV_pll_Mul4_v		= 0x2,	// PCLK=4*CLK.
-+		BCV_pll_SlowMul5_v	= 0x3,	// PCLK=5*CLK.
-+		BCV_pll_Mul5_v		= 0x4,	// PCLK=5*CLK.
-+		BCV_pll_SlowMul6_v	= 0x5,	// PCLK=6*CLK.
-+		BCV_pll_Mul6_v		= 0x6,	// PCLK=6*CLK.
-+		BCV_pll_Mul8_v		= 0x7,	// PCLK=8*CLK.
-+		BCV_pll_Mul10_v		= 0x8,	// PCLK=10*CLK.
-+	        BCV_pll_Res9_v	        = 0x9,
-+		BCV_pll_Res10_v	        = 0xa,
-+		BCV_pll_Res11_v	        = 0xb,
-+		BCV_pll_Res12_v	        = 0xc,
-+		BCV_pll_Res13_v		= 0xd,
-+		BCV_pll_Res14_v		= 0xe,
-+		BCV_pll_Res15_v		= 0xf,
-+	BCV_clkDiv_b		= 4,
-+	BCV_clkDiv_m		= 0x00000030,
-+		BCV_clkDiv_Div1_v	= 0x0,
-+		BCV_clkDiv_Div2_v	= 0x1,
-+		BCV_clkDiv_Div4_v	= 0x2,
-+		BCV_clkDiv_Res3_v	= 0x3,
-+	BCV_bigEndian_b		= 6,
-+	BCV_bigEndian_m		= 0x00000040,
-+	BCV_resetFast_b		= 7,
-+	BCV_resetFast_m		= 0x00000080,
-+	BCV_pciMode_b		= 8,
-+	BCV_pciMode_m		= 0x00000700,
-+		BCV_pciMode_disabled_v	= 0,	// PCI is disabled.
-+		BCV_pciMode_tnr_v	= 1,	// satellite Target Not Ready.
-+		BCV_pciMode_suspended_v	= 2,	// satellite with suspended CPU.
-+		BCV_pciMode_external_v	= 3,	// host, external arbiter.
-+		BCV_pciMode_fixed_v	= 4,	// host, fixed priority arbiter.
-+		BCV_pciMode_roundRobin_v= 5,	// host, round robin arbiter.
-+		BCV_pciMode_res6_v	= 6,
-+		BCV_pciMode_res7_v	= 7,
-+	BCV_watchDisable_b	= 11,
-+	BCV_watchDisable_m	= 0x00000800,
-+	BCV_res12_b		= 12,
-+	BCV_res12_m		= 0x00001000,
-+	BCV_res13_b		= 13,
-+	BCV_res13_m		= 0x00002000,
-+	BCV_res14_b		= 14,
-+	BCV_res14_m		= 0x00004000,
-+	BCV_res15_b		= 15,
-+	BCV_res15_m		= 0x00008000,
-+} ;
-+#endif	// __IDT_RST_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_spi.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_spi.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_spi.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_spi.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,120 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Serial Peripheral Interface register definitions.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_SPI_H__
-+#define __IDT_SPI_H__
-+
-+enum
-+{
-+	SPI0_PhysicalAddress	= 0x18070000,
-+	SPI_PhysicalAddress	= SPI0_PhysicalAddress,
-+
-+	SPI0_VirtualAddress	= 0xB8070000,
-+	SPI_VirtualAddress	= SPI0_VirtualAddress,
-+} ;
-+
-+typedef struct
-+{
-+	u32 spcp ;	// prescalar. 0=off, * spiClk = sysClk/(2*(spcp+1)*SPR)
-+	u32 spc ;	// spi control reg use SPC_
-+	u32 sps ;	// spi status reg use SPS_
-+	u32 spd ;	// spi data reg use SPD_
-+	u32 siofunc ;	// serial IO function use SIOFUNC_
-+	u32 siocfg ;	// serial IO config use SIOCFG_
-+	u32 siod;	// serial IO data use SIOD_
-+} volatile *SPI_t ;
-+
-+enum
-+{
-+	SPCP_div_b	 = 0,	       
-+	SPCP_div_m	 = 0x000000ff,
-+	SPC_spr_b	= 0,	       
-+	SPC_spr_m	= 0x00000003,
-+	     SPC_spr_div2_v  = 0,
-+	     SPC_spr_div4_v  = 1,
-+	     SPC_spr_div16_v = 2,
-+	     SPC_spr_div32_v = 3,
-+	SPC_cpha_b	= 2,	       
-+	SPC_cpha_m	= 0x00000004,
-+	SPC_cpol_b	= 3,	       
-+	SPC_cpol_m	= 0x00000008,
-+	SPC_mstr_b	= 4,	       
-+	SPC_mstr_m	= 0x00000010,
-+	SPC_spe_b	= 6,	       
-+	SPC_spe_m	= 0x00000040,
-+	SPC_spie_b	= 7,	       
-+	SPC_spie_m	= 0x00000080,
-+
-+	SPS_modf_b	= 4,	       
-+	SPS_modf_m	= 0x00000010,
-+	SPS_wcol_b	= 6,	       
-+	SPS_wcol_m	= 0x00000040,
-+	SPS_spif_b	= 7,	       
-+	SPS_spif_m	= 0x00000070,
-+
-+	SPD_data_b	= 0,	       
-+	SPD_data_m	= 0x000000ff,
-+
-+	SIOFUNC_sdo_b	    = 0,	   
-+	SIOFUNC_sdo_m	    = 0x00000001,
-+	SIOFUNC_sdi_b	    = 1,	   
-+	SIOFUNC_sdi_m	    = 0x00000002,
-+	SIOFUNC_sck_b	    = 2,	   
-+	SIOFUNC_sck_m	    = 0x00000004,
-+	SIOFUNC_pci_b	    = 3,	   
-+	SIOFUNC_pci_m	    = 0x00000008,
-+	
-+	SIOCFG_sdo_b	   = 0, 	   
-+	SIOCFG_sdo_m	   = 0x00000001,
-+	SIOCFG_sdi_b	   = 1, 	   
-+	SIOCFG_sdi_m	   = 0x00000002,
-+	SIOCFG_sck_b	   = 2, 	   
-+	SIOCFG_sck_m	   = 0x00000004,
-+	SIOCFG_pci_b	   = 3, 	   
-+	SIOCFG_pci_m	   = 0x00000008,
-+	
-+	SIOD_sdo_b	 = 0,		 
-+	SIOD_sdo_m	 = 0x00000001,
-+	SIOD_sdi_b	 = 1,		 
-+	SIOD_sdi_m	 = 0x00000002,
-+	SIOD_sck_b	 = 2,		 
-+	SIOD_sck_m	 = 0x00000004,
-+	SIOD_pci_b	 = 3,		 
-+	SIOD_pci_m	 = 0x00000008,
-+} ;
-+#endif	// __IDT_SPI_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_timer.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_timer.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_timer.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_timer.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,91 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Definitions for timer registers
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt,neb.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_TIM_H__
-+#define __IDT_TIM_H__
-+
-+enum
-+{
-+	TIM0_PhysicalAddress	= 0x18028000,
-+	TIM_PhysicalAddress	= TIM0_PhysicalAddress,		// Default
-+
-+	TIM0_VirtualAddress	= 0xb8028000,
-+	TIM_VirtualAddress	= TIM0_VirtualAddress,		// Default
-+} ;
-+
-+enum
-+{
-+	TIM_Count = 3,
-+} ;
-+
-+struct TIM_CNTR_s
-+{
-+  u32 count ;
-+  u32 compare ;
-+  u32 ctc ;	//use CTC_
-+} ;
-+
-+typedef struct TIM_s
-+{
-+  struct TIM_CNTR_s	tim [TIM_Count] ;
-+  u32			rcount ;	//use RCOUNT_
-+  u32			rcompare ;	//use RCOMPARE_
-+  u32			rtc ;		//use RTC_
-+} volatile * TIM_t ;
-+
-+enum
-+{
-+  CTC_en_b	= 0,		
-+  CTC_en_m	= 0x00000001,
-+  CTC_to_b	= 1,		 
-+  CTC_to_m	= 0x00000002,
-+  
-+  RCOUNT_count_b		= 0,	     
-+  RCOUNT_count_m		= 0x0000ffff,
-+  RCOMPARE_compare_b	= 0,	   
-+  RCOMPARE_compare_m	= 0x0000ffff,
-+  RTC_ce_b		= 0,		
-+  RTC_ce_m		= 0x00000001,
-+  RTC_to_b		= 1,		
-+  RTC_to_m		= 0x00000002,
-+  RTC_rqe_b		= 2,		
-+  RTC_rqe_m		= 0x00000004,
-+  
-+} ;
-+#endif	// __IDT_TIM_H__
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_uart.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_uart.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32434/rc32434_uart.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32434/rc32434_uart.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,189 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   UART register definitions
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_UART_H__
-+#define __IDT_UART_H__
-+
-+enum
-+{
-+	UART0_PhysicalAddress	= 0x1c000000,
-+	UART_PhysicalAddress	= UART0_PhysicalAddress,	// Default
-+
-+	UART0_VirtualAddress	= 0xbc000000,
-+	UART_VirtualAddress	= UART0_VirtualAddress,		// Default
-+} ;
-+
-+/*
-+ * Register definitions are in bytes so we can handle endian problems.
-+ */
-+
-+typedef struct UART_s
-+{
-+	union
-+	{
-+		u32 const	uartrb ;	// 0x00 - DLAB=0, read.
-+		u32		uartth ;	// 0x00 - DLAB=0, write.
-+		u32		uartdll ;	// 0x00 - DLAB=1, read/write.
-+	} ;
-+
-+	union
-+	{
-+		u32		uartie ;	// 0x04 - DLAB=0, read/write.
-+		u32		uartdlh ;	// 0x04 - DLAB=1, read/write.
-+	} ;
-+	union
-+	{
-+		u32 const	uartii ;	// 0x08 - DLAB=0, read.
-+		u32		uartfc ;	// 0x08 - DLAB=0, write.
-+	} ;
-+
-+	u32		uartlc ;		// 0x0c
-+	u32		uartmc ;		// 0x10
-+	u32		uartls ;		// 0x14
-+	u32		uartms ;		// 0x18
-+	u32		uarts ;			// 0x1c
-+} volatile *UART_t ;
-+
-+// Reset registers.
-+typedef u32	volatile *UARTRR_t ;
-+
-+enum
-+{
-+	UARTIE_rda_b	= 0,
-+	UARTIE_rda_m	= 0x00000001,
-+	UARTIE_the_b	= 1,
-+	UARTIE_the_m	= 0x00000002,
-+	UARTIE_rls_b	= 2,
-+	UARTIE_rls_m	= 0x00000004,
-+	UARTIE_ems_b	= 3,
-+	UARTIE_ems_m	= 0x00000008,
-+
-+	UARTII_pi_b	= 0,
-+	UARTII_pi_m	= 0x00000001,
-+	UARTII_iid_b	= 1,
-+	UARTII_iid_m	= 0x0000000e,
-+		UARTII_iid_ms_v		= 0,	// Modem stat-CTS,DSR,RI or DCD.
-+		UARTII_iid_thre_v	= 1,	// Trans. Holding Reg. empty.
-+		UARTII_iid_rda_v	= 2,	// Receive data available
-+		UARTII_iid_rls_v	= 3,	// Overrun, parity, etc, error.
-+		UARTII_iid_res4_v	= 4,	// reserved.
-+		UARTII_iid_res5_v	= 5,	// reserved.
-+		UARTII_iid_cto_v	= 6,	// Character timeout.
-+		UARTII_iid_res7_v	= 7,	// reserved.
-+
-+	UARTFC_en_b	= 0,
-+	UARTFC_en_m	= 0x00000001,
-+	UARTFC_rr_b	= 1,
-+	UARTFC_rr_m	= 0x00000002,
-+	UARTFC_tr_b	= 2,
-+	UARTFC_tr_m	= 0x00000004,
-+	UARTFC_dms_b	= 3,
-+	UARTFC_dms_m	= 0x00000008,
-+	UARTFC_rt_b	= 6,
-+	UARTFC_rt_m	= 0x000000c0,
-+		UARTFC_rt_1Byte_v	= 0,
-+		UARTFC_rt_4Byte_v	= 1,
-+		UARTFC_rt_8Byte_v	= 2,
-+		UARTFC_rt_14Byte_v	= 3,
-+
-+	UARTLC_wls_b	= 0,
-+	UARTLC_wls_m	= 0x00000003,
-+		UARTLC_wls_5Bits_v	= 0,
-+		UARTLC_wls_6Bits_v	= 1,
-+		UARTLC_wls_7Bits_v	= 2,
-+		UARTLC_wls_8Bits_v	= 3,
-+	UARTLC_stb_b	= 2,
-+	UARTLC_stb_m	= 0x00000004,
-+	UARTLC_pen_b	= 3,
-+	UARTLC_pen_m	= 0x00000008,
-+	UARTLC_eps_b	= 4,
-+	UARTLC_eps_m	= 0x00000010,
-+	UARTLC_sp_b	= 5,
-+	UARTLC_sp_m	= 0x00000020,
-+	UARTLC_sb_b	= 6,
-+	UARTLC_sb_m	= 0x00000040,
-+	UARTLC_dlab_b	= 7,
-+	UARTLC_dlab_m	= 0x00000080,
-+
-+	UARTMC_dtr_b	= 0,
-+	UARTMC_dtr_m	= 0x00000001,
-+	UARTMC_rts_b	= 1,
-+	UARTMC_rts_m	= 0x00000002,
-+	UARTMC_o1_b	= 2,
-+	UARTMC_o1_m	= 0x00000004,
-+	UARTMC_o2_b	= 3,
-+	UARTMC_o2_m	= 0x00000008,
-+	UARTMC_lp_b	= 4,
-+	UARTMC_lp_m	= 0x00000010,
-+
-+	UARTLS_dr_b	= 0,
-+	UARTLS_dr_m	= 0x00000001,
-+	UARTLS_oe_b	= 1,
-+	UARTLS_oe_m	= 0x00000002,
-+	UARTLS_pe_b	= 2,
-+	UARTLS_pe_m	= 0x00000004,
-+	UARTLS_fe_b	= 3,
-+	UARTLS_fe_m	= 0x00000008,
-+	UARTLS_bi_b	= 4,
-+	UARTLS_bi_m	= 0x00000010,
-+	UARTLS_thr_b	= 5,
-+	UARTLS_thr_m	= 0x00000020,
-+	UARTLS_te_b	= 6,
-+	UARTLS_te_m	= 0x00000040,
-+	UARTLS_rfe_b	= 7,
-+	UARTLS_rfe_m	= 0x00000080,
-+
-+	UARTMS_dcts_b	= 0,
-+	UARTMS_dcts_m	= 0x00000001,
-+	UARTMS_ddsr_b	= 1,
-+	UARTMS_ddsr_m	= 0x00000002,
-+	UARTMS_teri_b	= 2,
-+	UARTMS_teri_m	= 0x00000004,
-+	UARTMS_ddcd_b	= 3,
-+	UARTMS_ddcd_m	= 0x00000008,
-+	UARTMS_cts_b	= 4,
-+	UARTMS_cts_m	= 0x00000010,
-+	UARTMS_dsr_b	= 5,
-+	UARTMS_dsr_m	= 0x00000020,
-+	UARTMS_ri_b	= 6,
-+	UARTMS_ri_m	= 0x00000040,
-+	UARTMS_dcd_b	= 7,
-+	UARTMS_dcd_m	= 0x00000080,
-+} ;
-+
-+#endif	// __IDT_UART_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_dma.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_dma.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_dma.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_dma.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,231 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Register definitions for  IDT RC32438 DMA.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+#ifndef __IDT_RC32438_DMA_H__
-+#define __IDT_RC32438_DMA_H__
-+enum
-+{
-+	DMA0_PhysicalAddress	= 0x18040000,
-+	DMA_PhysicalAddress	= DMA0_PhysicalAddress,		// Default
-+
-+	DMA0_VirtualAddress	= 0xb8040000,
-+	DMA_VirtualAddress	= DMA0_VirtualAddress,		// Default
-+} ;
-+
-+/*
-+ * DMA descriptor (in physical memory).
-+ */
-+
-+typedef struct DMAD_s
-+{
-+	u32			control ;	// Control. use DMAD_*
-+	u32			ca ;		// Current Address.
-+	u32			devcs ; 	// Device control and status.
-+	u32			link ;		// Next descriptor in chain.
-+} volatile *DMAD_t ;
-+
-+enum
-+{
-+	DMAD_size		= sizeof (struct DMAD_s),
-+	DMAD_count_b		= 0,		// in DMAD_t -> control
-+	DMAD_count_m		= 0x0003ffff,	// in DMAD_t -> control
-+	DMAD_ds_b		= 20,		// in DMAD_t -> control
-+	DMAD_ds_m		= 0x00300000,	// in DMAD_t -> control
-+		DMAD_ds_extToMem0_v	= 0,
-+		DMAD_ds_memToExt0_v	= 1,
-+		DMAD_ds_extToMem1_v	= 0,
-+		DMAD_ds_memToExt1_v	= 1,
-+		DMAD_ds_ethRcv0_v	= 0,
-+		DMAD_ds_ethXmt0_v	= 0,
-+		DMAD_ds_ethRcv1_v	= 0,
-+		DMAD_ds_ethXmt2_v	= 0,
-+		DMAD_ds_memToFifo_v	= 0,
-+		DMAD_ds_fifoToMem_v	= 0,
-+		DMAD_ds_rng_de_v	   = 1,//randomNumberGenerator on LC/DE
-+		DMAD_ds_pciToMem_v	= 0,
-+		DMAD_ds_memToPci_v	= 0,
-+		DMAD_ds_securityInput_v = 0,
-+		DMAD_ds_securityOutput_v = 0,
-+		DMAD_ds_rng_se_v	= 0,//randomNumberGenerator on SE
-+	
-+	DMAD_devcmd_b		= 22,		// in DMAD_t -> control
-+	DMAD_devcmd_m		= 0x01c00000,	// in DMAD_t -> control
-+		DMAD_devcmd_byte_v	= 0,	//memory-to-memory
-+		DMAD_devcmd_halfword_v	= 1,	//memory-to-memory
-+		DMAD_devcmd_word_v	= 2,	//memory-to-memory
-+		DMAD_devcmd_2words_v	= 3,	//memory-to-memory
-+		DMAD_devcmd_4words_v	= 4,	//memory-to-memory
-+		DMAD_devcmd_6words_v	= 5,	//memory-to-memory
-+		DMAD_devcmd_8words_v	= 6,	//memory-to-memory
-+		DMAD_devcmd_16words_v	= 7,	//memory-to-memory
-+	DMAD_cof_b		= 25,		// chain on finished
-+	DMAD_cof_m		= 0x02000000,	// 
-+	DMAD_cod_b		= 26,		// chain on done
-+	DMAD_cod_m		= 0x04000000,	// 
-+	DMAD_iof_b		= 27,		// interrupt on finished
-+	DMAD_iof_m		= 0x08000000,	// 
-+	DMAD_iod_b		= 28,		// interrupt on done
-+	DMAD_iod_m		= 0x10000000,	// 
-+	DMAD_t_b		= 29,		// terminated
-+	DMAD_t_m		= 0x20000000,	// 
-+	DMAD_d_b		= 30,		// done
-+	DMAD_d_m		= 0x40000000,	// 
-+	DMAD_f_b		= 31,		// finished
-+	DMAD_f_m		= 0x80000000,	// 
-+} ;
-+
-+/*
-+ * DMA register (within Internal Register Map).
-+ */
-+
-+struct DMA_Chan_s
-+{
-+	u32		dmac ;		// Control.
-+	u32		dmas ;		// Status.	
-+	u32		dmasm ; 	// Mask.
-+	u32		dmadptr ;	// Descriptor pointer.
-+	u32		dmandptr ;	// Next descriptor pointer.
-+};
-+
-+typedef struct DMA_Chan_s volatile *DMA_Chan_t ;
-+
-+//DMA_Channels	  use DMACH_count instead
-+
-+enum
-+{
-+	DMAC_run_b	= 0,		// 
-+	DMAC_run_m	= 0x00000001,	// 
-+	DMAC_dm_b	= 1,		// done mask
-+	DMAC_dm_m	= 0x00000002,	// 
-+	DMAC_mode_b	= 2,		// 
-+	DMAC_mode_m	= 0x0000000c,	// 
-+		DMAC_mode_auto_v	= 0,
-+		DMAC_mode_burst_v	= 1,
-+		DMAC_mode_transfer_v	= 2, //usually used
-+		DMAC_mode_reserved_v	= 3,
-+	DMAC_a_b	= 4,		// 
-+	DMAC_a_m	= 0x00000010,	// 
-+
-+	DMAS_f_b	= 0,		// finished (sticky) 
-+	DMAS_f_m	= 0x00000001,	//		     
-+	DMAS_d_b	= 1,		// done (sticky)     
-+	DMAS_d_m	= 0x00000002,	//		     
-+	DMAS_c_b	= 2,		// chain (sticky)    
-+	DMAS_c_m	= 0x00000004,	//		     
-+	DMAS_e_b	= 3,		// error (sticky)    
-+	DMAS_e_m	= 0x00000008,	//		     
-+	DMAS_h_b	= 4,		// halt (sticky)     
-+	DMAS_h_m	= 0x00000010,	//		     
-+
-+	DMASM_f_b	= 0,		// finished (1=mask)
-+	DMASM_f_m	= 0x00000001,	// 
-+	DMASM_d_b	= 1,		// done (1=mask)
-+	DMASM_d_m	= 0x00000002,	// 
-+	DMASM_c_b	= 2,		// chain (1=mask)
-+	DMASM_c_m	= 0x00000004,	// 
-+	DMASM_e_b	= 3,		// error (1=mask)
-+	DMASM_e_m	= 0x00000008,	// 
-+	DMASM_h_b	= 4,		// halt (1=mask)
-+	DMASM_h_m	= 0x00000010,	// 
-+} ;
-+
-+/*
-+ * DMA channel definitions
-+ */
-+
-+enum
-+{
-+	DMACH_extToMem0 = 0,
-+	DMACH_memToExt0 = 0,
-+	DMACH_extToMem1 = 1,
-+	DMACH_memToExt1 = 1,
-+	DMACH_ethRcv0 = 2,
-+	DMACH_ethXmt0 = 3,
-+	DMACH_ethRcv1 = 4,
-+	DMACH_ethXmt2 = 5,
-+	DMACH_memToFifo = 6,
-+	DMACH_fifoToMem = 7,
-+	DMACH_rng_de = 7,//randomNumberGenerator on LC/DE
-+	DMACH_pciToMem = 8,
-+	DMACH_memToPci = 9,
-+	DMACH_securityInput = 10,
-+	DMACH_securityOutput = 11,
-+	DMACH_rng_se = 12, //randomNumberGenerator on SE
-+	
-+	DMACH_count //must be last
-+};
-+
-+
-+typedef struct DMAC_s
-+{
-+	struct DMA_Chan_s ch [DMACH_count] ; //use ch[DMACH_]
-+} volatile *DMA_t ;
-+
-+
-+/*
-+ * External DMA parameters
-+*/
-+
-+enum
-+{
-+	DMADEVCMD_ts_b	= 0,		// ts field in devcmd
-+	DMADEVCMD_ts_m	= 0x00000007,	// ts field in devcmd
-+		DMADEVCMD_ts_byte_v	= 0,
-+		DMADEVCMD_ts_halfword_v	= 1,
-+		DMADEVCMD_ts_word_v	= 2,
-+		DMADEVCMD_ts_2word_v	= 3,
-+		DMADEVCMD_ts_4word_v	= 4,
-+		DMADEVCMD_ts_6word_v	= 5,
-+		DMADEVCMD_ts_8word_v	= 6,
-+		DMADEVCMD_ts_16word_v	= 7
-+};
-+
-+
-+#if 1	// aws - Compatibility.
-+#	define	EXTDMA_ts_b		DMADEVCMD_ts_b
-+#	define	EXTDMA_ts_m		DMADEVCMD_ts_m
-+#	define	EXTDMA_ts_byte_v	DMADEVCMD_ts_byte_v
-+#	define	EXTDMA_ts_halfword_v	DMADEVCMD_ts_halfword_v
-+#	define	EXTDMA_ts_word_v	DMADEVCMD_ts_word_v
-+#	define	EXTDMA_ts_2word_v	DMADEVCMD_ts_2word_v
-+#	define	EXTDMA_ts_4word_v	DMADEVCMD_ts_4word_v
-+#	define	EXTDMA_ts_6word_v	DMADEVCMD_ts_6word_v
-+#	define	EXTDMA_ts_8word_v	DMADEVCMD_ts_8word_v
-+#	define	EXTDMA_ts_16word_v	DMADEVCMD_ts_16word_v
-+#endif	// aws - Compatibility.
-+
-+#endif //__IDT_RC32438_DMA_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_dma_v.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_dma_v.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_dma_v.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_dma_v.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,82 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   DMA operations for IDT RC32438.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_RC32438_DMA_V_H__
-+#define __IDT_RC32438_DMA_V_H__
-+#include  <asm/idt-boards/rc32438/rc32438_dma.h> 
-+
-+#define DMA_CHAN_OFFSET  0x14
-+#define IS_DMA_USED(X) (((X) & (DMAD_f_m | DMAD_d_m | DMAD_t_m)) != 0)
-+#define DMA_COUNT(count)   \
-+  ((count) & DMAD_count_m)
-+
-+#define DMA_HALT_TIMEOUT 500
-+
-+
-+static inline int rc32438_halt_dma(DMA_Chan_t ch)
-+{
-+	int timeout=1;
-+	if (rc32438_readl(&ch->dmac) & DMAC_run_m) {
-+		rc32438_writel(0, &ch->dmac); 
-+		
-+		for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) {
-+			if (rc32438_readl(&ch->dmas) & DMAS_h_m) {
-+				rc32438_writel(0, &ch->dmas);  
-+				break;
-+			}
-+		}
-+
-+	}
-+	
-+	return timeout ? 0 : 1;
-+}
-+
-+
-+
-+
-+static inline void rc32438_start_dma(DMA_Chan_t ch, u32 dma_addr)
-+{
-+	rc32438_writel(0, &ch->dmandptr); 
-+	rc32438_writel(dma_addr, &ch->dmadptr);
-+}
-+
-+static inline void rc32438_chain_dma(DMA_Chan_t ch, u32 dma_addr)
-+{
-+	rc32438_writel(dma_addr, &ch->dmandptr);
-+}
-+#endif //__IDT_RC32438_DMA_V_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_eth.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_eth.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_eth.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_eth.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,328 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Definitions for IDT EB438 ethernet
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_RC32438_ETH_H__
-+#define __IDT_RC32438_ETH_H__
-+enum
-+{
-+	ETH0_PhysicalAddress	= 0x18058000,
-+	ETH_PhysicalAddress	= ETH0_PhysicalAddress,		// Default
-+
-+	ETH0_VirtualAddress	= 0xb8058000,
-+	ETH_VirtualAddress	= ETH0_VirtualAddress,		// Default
-+	ETH1_PhysicalAddress	= 0x18060000,
-+	ETH1_VirtualAddress	= 0xb8060000,			// Default
-+} ;
-+
-+typedef struct
-+{
-+	u32 ethintfc		;
-+	u32 ethfifott		;
-+	u32 etharc		;
-+	u32 ethhash0		;
-+	u32 ethhash1		;
-+	u32 ethu0 [4]		;	// Reserved.	
-+	u32 ethpfs		;
-+	u32 ethmcp		;
-+	u32 eth_u1 [10]		;	// Reserved.
-+	u32 ethspare		;
-+	u32 eth_u2 [42]		;	// Reserved. 
-+	u32 ethsal0		;
-+	u32 ethsah0		;
-+	u32 ethsal1		;
-+	u32 ethsah1		;
-+	u32 ethsal2		;
-+	u32 ethsah2		;
-+	u32 ethsal3		;
-+	u32 ethsah3		;
-+	u32 ethrbc		;
-+	u32 ethrpc		;
-+	u32 ethrupc		;
-+	u32 ethrfc		;
-+	u32 ethtbc		;
-+	u32 ethgpf		;
-+	u32 eth_u9 [50]		;	// Reserved.	
-+	u32 ethmac1		;
-+	u32 ethmac2		;
-+	u32 ethipgt		;
-+	u32 ethipgr		;
-+	u32 ethclrt		;
-+	u32 ethmaxf		;
-+	u32 eth_u10		;	// Reserved.	
-+	u32 ethmtest		;
-+	u32 miimcfg		;
-+	u32 miimcmd		;
-+	u32 miimaddr		;
-+	u32 miimwtd		;
-+	u32 miimrdd		;
-+	u32 miimind		;
-+	u32 eth_u11		;	// Reserved.
-+	u32 eth_u12		;	// Reserved.
-+	u32 ethcfsa0		;
-+	u32 ethcfsa1		;
-+	u32 ethcfsa2		;
-+} volatile *ETH_t;
-+
-+enum
-+{
-+	ETHINTFC_en_b		= 0,
-+	ETHINTFC_en_m		= 0x00000001,
-+	ETHINTFC_its_b		= 1,
-+	ETHINTFC_its_m		= 0x00000002,
-+	ETHINTFC_rip_b		= 2,
-+	ETHINTFC_rip_m		= 0x00000004,
-+	ETHINTFC_jam_b		= 3,
-+	ETHINTFC_jam_m		= 0x00000008,
-+	ETHINTFC_ovr_b		= 4,
-+	ETHINTFC_ovr_m		= 0x00000010,
-+	ETHINTFC_und_b		= 5,
-+	ETHINTFC_und_m		= 0x00000020,
-+
-+	ETHFIFOTT_tth_b		= 0,
-+	ETHFIFOTT_tth_m		= 0x0000007f,
-+
-+	ETHARC_pro_b		= 0,
-+	ETHARC_pro_m		= 0x00000001,
-+	ETHARC_am_b		= 1,
-+	ETHARC_am_m		= 0x00000002,
-+	ETHARC_afm_b		= 2,
-+	ETHARC_afm_m		= 0x00000004,
-+	ETHARC_ab_b		= 3,
-+	ETHARC_ab_m		= 0x00000008,
-+
-+	ETHSAL_byte5_b		= 0,
-+	ETHSAL_byte5_m		= 0x000000ff,
-+	ETHSAL_byte4_b		= 8,
-+	ETHSAL_byte4_m		= 0x0000ff00,
-+	ETHSAL_byte3_b		= 16,
-+	ETHSAL_byte3_m		= 0x00ff0000,
-+	ETHSAL_byte2_b		= 24,
-+	ETHSAL_byte2_m		= 0xff000000,
-+
-+	ETHSAH_byte1_b		= 0,
-+	ETHSAH_byte1_m		= 0x000000ff,
-+	ETHSAH_byte0_b		= 8,
-+	ETHSAH_byte0_m		= 0x0000ff00,
-+	
-+	ETHGPF_ptv_b		= 0,
-+	ETHGPF_ptv_m		= 0x0000ffff,
-+
-+	ETHPFS_pfd_b		= 0,
-+	ETHPFS_pfd_m		= 0x00000001,
-+
-+	ETHCFSA0_cfsa4_b	= 0,
-+	ETHCFSA0_cfsa4_m	= 0x000000ff,
-+	ETHCFSA0_cfsa5_b	= 8,
-+	ETHCFSA0_cfsa5_m	= 0x0000ff00,
-+
-+	ETHCFSA1_cfsa2_b	= 0,
-+	ETHCFSA1_cfsa2_m	= 0x000000ff,
-+	ETHCFSA1_cfsa3_b	= 8,
-+	ETHCFSA1_cfsa3_m	= 0x0000ff00,
-+
-+	ETHCFSA2_cfsa0_b	= 0,
-+	ETHCFSA2_cfsa0_m	= 0x000000ff,
-+	ETHCFSA2_cfsa1_b	= 8,
-+	ETHCFSA2_cfsa1_m	= 0x0000ff00,
-+
-+	ETHMAC1_re_b		= 0,
-+	ETHMAC1_re_m		= 0x00000001,
-+	ETHMAC1_paf_b		= 1,
-+	ETHMAC1_paf_m		= 0x00000002,
-+	ETHMAC1_rfc_b		= 2,
-+	ETHMAC1_rfc_m		= 0x00000004,
-+	ETHMAC1_tfc_b		= 3,
-+	ETHMAC1_tfc_m		= 0x00000008,
-+	ETHMAC1_lb_b		= 4,
-+	ETHMAC1_lb_m		= 0x00000010,
-+	ETHMAC1_mr_b		= 31,
-+	ETHMAC1_mr_m		= 0x80000000,
-+
-+	ETHMAC2_fd_b		= 0,
-+	ETHMAC2_fd_m		= 0x00000001,
-+	ETHMAC2_flc_b		= 1,
-+	ETHMAC2_flc_m		= 0x00000002,
-+	ETHMAC2_hfe_b		= 2,
-+	ETHMAC2_hfe_m		= 0x00000004,
-+	ETHMAC2_dc_b		= 3,
-+	ETHMAC2_dc_m		= 0x00000008,
-+	ETHMAC2_cen_b		= 4,
-+	ETHMAC2_cen_m		= 0x00000010,
-+	ETHMAC2_pe_b		= 5,
-+	ETHMAC2_pe_m		= 0x00000020,
-+	ETHMAC2_vpe_b		= 6,
-+	ETHMAC2_vpe_m		= 0x00000040,
-+	ETHMAC2_ape_b		= 7,
-+	ETHMAC2_ape_m		= 0x00000080,
-+	ETHMAC2_ppe_b		= 8,
-+	ETHMAC2_ppe_m		= 0x00000100,
-+	ETHMAC2_lpe_b		= 9,
-+	ETHMAC2_lpe_m		= 0x00000200,
-+	ETHMAC2_nb_b		= 12,
-+	ETHMAC2_nb_m		= 0x00001000,
-+	ETHMAC2_bp_b		= 13,
-+	ETHMAC2_bp_m		= 0x00002000,
-+	ETHMAC2_ed_b		= 14,
-+	ETHMAC2_ed_m		= 0x00004000,
-+
-+	ETHIPGT_ipgt_b		= 0,
-+	ETHIPGT_ipgt_m		= 0x0000007f,
-+
-+	ETHIPGR_ipgr2_b		= 0,
-+	ETHIPGR_ipgr2_m		= 0x0000007f,
-+	ETHIPGR_ipgr1_b		= 8,
-+	ETHIPGR_ipgr1_m		= 0x00007f00,
-+
-+	ETHCLRT_maxret_b	= 0,
-+	ETHCLRT_maxret_m	= 0x0000000f,
-+	ETHCLRT_colwin_b	= 8,
-+	ETHCLRT_colwin_m	= 0x00003f00,
-+
-+	ETHMAXF_maxf_b		= 0,
-+	ETHMAXF_maxf_m		= 0x0000ffff,
-+
-+	ETHMTEST_tb_b		= 2,
-+	ETHMTEST_tb_m		= 0x00000004,
-+
-+	ETHMCP_div_b		= 0,
-+	ETHMCP_div_m		= 0x000000ff,
-+	
-+	MIIMCFG_rsv_b		= 0,
-+	MIIMCFG_rsv_m		= 0x0000000c,
-+
-+	MIIMCMD_rd_b		= 0,
-+	MIIMCMD_rd_m		= 0x00000001,
-+	MIIMCMD_scn_b		= 1,
-+	MIIMCMD_scn_m		= 0x00000002,
-+
-+	MIIMADDR_regaddr_b	= 0,
-+	MIIMADDR_regaddr_m	= 0x0000001f,
-+	MIIMADDR_phyaddr_b	= 8,
-+	MIIMADDR_phyaddr_m	= 0x00001f00,
-+
-+	MIIMWTD_wdata_b		= 0,
-+	MIIMWTD_wdata_m		= 0x0000ffff,
-+
-+	MIIMRDD_rdata_b		= 0,
-+	MIIMRDD_rdata_m		= 0x0000ffff,
-+
-+	MIIMIND_bsy_b		= 0,
-+	MIIMIND_bsy_m		= 0x00000001,
-+	MIIMIND_scn_b		= 1,
-+	MIIMIND_scn_m		= 0x00000002,
-+	MIIMIND_nv_b		= 2,
-+	MIIMIND_nv_m		= 0x00000004,
-+
-+} ;
-+
-+/*
-+ * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors.
-+ */
-+enum
-+{
-+	ETHRX_fd_b		= 0,
-+	ETHRX_fd_m		= 0x00000001,
-+	ETHRX_ld_b		= 1,
-+	ETHRX_ld_m		= 0x00000002,
-+	ETHRX_rok_b		= 2,
-+	ETHRX_rok_m		= 0x00000004,
-+	ETHRX_fm_b		= 3,
-+	ETHRX_fm_m		= 0x00000008,
-+	ETHRX_mp_b		= 4,
-+	ETHRX_mp_m		= 0x00000010,
-+	ETHRX_bp_b		= 5,
-+	ETHRX_bp_m		= 0x00000020,
-+	ETHRX_vlt_b		= 6,
-+	ETHRX_vlt_m		= 0x00000040,
-+	ETHRX_cf_b		= 7,
-+	ETHRX_cf_m		= 0x00000080,
-+	ETHRX_ovr_b		= 8,
-+	ETHRX_ovr_m		= 0x00000100,
-+	ETHRX_crc_b		= 9,
-+	ETHRX_crc_m		= 0x00000200,
-+	ETHRX_cv_b		= 10,
-+	ETHRX_cv_m		= 0x00000400,
-+	ETHRX_db_b		= 11,
-+	ETHRX_db_m		= 0x00000800,
-+	ETHRX_le_b		= 12,
-+	ETHRX_le_m		= 0x00001000,
-+	ETHRX_lor_b		= 13,
-+	ETHRX_lor_m		= 0x00002000,
-+	ETHRX_ces_b		= 14,
-+	ETHRX_ces_m		= 0x00004000,
-+	ETHRX_length_b		= 16,
-+	ETHRX_length_m		= 0xffff0000,
-+
-+	ETHTX_fd_b		= 0,
-+	ETHTX_fd_m		= 0x00000001,
-+	ETHTX_ld_b		= 1,
-+	ETHTX_ld_m		= 0x00000002,
-+	ETHTX_oen_b		= 2,
-+	ETHTX_oen_m		= 0x00000004,
-+	ETHTX_pen_b		= 3,
-+	ETHTX_pen_m		= 0x00000008,
-+	ETHTX_cen_b		= 4,
-+	ETHTX_cen_m		= 0x00000010,
-+	ETHTX_hen_b		= 5,
-+	ETHTX_hen_m		= 0x00000020,
-+	ETHTX_tok_b		= 6,
-+	ETHTX_tok_m		= 0x00000040,
-+	ETHTX_mp_b		= 7,
-+	ETHTX_mp_m		= 0x00000080,
-+	ETHTX_bp_b		= 8,
-+	ETHTX_bp_m		= 0x00000100,
-+	ETHTX_und_b		= 9,
-+	ETHTX_und_m		= 0x00000200,
-+	ETHTX_of_b		= 10,
-+	ETHTX_of_m		= 0x00000400,
-+	ETHTX_ed_b		= 11,
-+	ETHTX_ed_m		= 0x00000800,
-+	ETHTX_ec_b		= 12,
-+	ETHTX_ec_m		= 0x00001000,
-+	ETHTX_lc_b		= 13,
-+	ETHTX_lc_m		= 0x00002000,
-+	ETHTX_td_b		= 14,
-+	ETHTX_td_m		= 0x00004000,
-+	ETHTX_crc_b		= 15,
-+	ETHTX_crc_m		= 0x00008000,
-+	ETHTX_le_b		= 16,
-+	ETHTX_le_m		= 0x00010000,
-+	ETHTX_cc_b		= 17,
-+	ETHTX_cc_m		= 0x001E0000,
-+} ;
-+#endif //__IDT_RC32438_ETH_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_eth_v.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_eth_v.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_eth_v.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_eth_v.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,72 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   macros for IDT EB438 ethernet
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_RC32438_ETH_V_H__
-+#define __IDT_RC32438_ETH_V_H__
-+#include  <asm/idt-boards/rc32438/rc32438_eth.h> 
-+
-+#define IS_TX_TOK(X)         (((X) & (1<<ETHTX_tok_b)) >> ETHTX_tok_b )   /* Transmit Okay    */
-+#define IS_TX_MP(X)          (((X) & (1<<ETHTX_mp_b))  >> ETHTX_mp_b )    /* Multicast        */
-+#define IS_TX_BP(X)          (((X) & (1<<ETHTX_bp_b))  >> ETHTX_bp_b )    /* Broadcast        */
-+#define IS_TX_UND_ERR(X)     (((X) & (1<<ETHTX_und_b)) >> ETHTX_und_b )   /* Transmit FIFO Underflow */
-+#define IS_TX_OF_ERR(X)      (((X) & (1<<ETHTX_of_b))  >> ETHTX_of_b )    /* Oversized frame  */
-+#define IS_TX_ED_ERR(X)      (((X) & (1<<ETHTX_ed_b))  >> ETHTX_ed_b )    /* Excessive deferral  */
-+#define IS_TX_EC_ERR(X)      (((X) & (1<<ETHTX_ec_b))  >> ETHTX_ec_b)     /* Excessive collisions  */
-+#define IS_TX_LC_ERR(X)      (((X) & (1<<ETHTX_lc_b))  >> ETHTX_lc_b )    /* Late Collision   */
-+#define IS_TX_TD_ERR(X)      (((X) & (1<<ETHTX_td_b))  >> ETHTX_td_b )    /* Transmit deferred*/
-+#define IS_TX_CRC_ERR(X)     (((X) & (1<<ETHTX_crc_b)) >> ETHTX_crc_b )   /* CRC Error        */
-+#define IS_TX_LE_ERR(X)      (((X) & (1<<ETHTX_le_b))  >>  ETHTX_le_b )    /* Length Error     */
-+
-+#define TX_COLLISION_COUNT(X) (((X) & ETHTX_cc_m)>>ETHTX_cc_b)  /* Collision Count  */
-+
-+#define IS_RCV_ROK(X)        (((X) & (1<<ETHRX_rok_b)) >> ETHRX_rok_b)    /* Receive Okay     */
-+#define IS_RCV_FM(X)         (((X) & (1<<ETHRX_fm_b))  >> ETHRX_fm_b)     /* Is Filter Match  */
-+#define IS_RCV_MP(X)         (((X) & (1<<ETHRX_mp_b))  >> ETHRX_mp_b)     /* Is it MP         */
-+#define IS_RCV_BP(X)         (((X) & (1<<ETHRX_bp_b))  >> ETHRX_bp_b)     /* Is it BP         */
-+#define IS_RCV_VLT(X)        (((X) & (1<<ETHRX_vlt_b)) >> ETHRX_vlt_b)    /* VLAN Tag Detect  */
-+#define IS_RCV_CF(X)         (((X) & (1<<ETHRX_cf_b))  >> ETHRX_cf_b)     /* Control Frame    */
-+#define IS_RCV_OVR_ERR(X)    (((X) & (1<<ETHRX_ovr_b)) >> ETHRX_ovr_b)    /* Receive Overflow */
-+#define IS_RCV_CRC_ERR(X)    (((X) & (1<<ETHRX_crc_b)) >> ETHRX_crc_b)    /* CRC Error        */
-+#define IS_RCV_CV_ERR(X)     (((X) & (1<<ETHRX_cv_b))  >> ETHRX_cv_b)     /* Code Violation   */
-+#define IS_RCV_DB_ERR(X)     (((X) & (1<<ETHRX_db_b))  >> ETHRX_db_b)     /* Dribble Bits     */
-+#define IS_RCV_LE_ERR(X)     (((X) & (1<<ETHRX_le_b))  >> ETHRX_le_b)     /* Length error     */
-+#define IS_RCV_LOR_ERR(X)    (((X) & (1<<ETHRX_lor_b)) >> ETHRX_lor_b)    /* Length Out of Range */
-+#define IS_RCV_CES_ERR(X)    (((X) & (1<<ETHRX_ces_b)) >> ETHRX_ces_b)  /* Preamble error   */
-+#define RCVPKT_LENGTH(X)     (((X) & ETHRX_length_m) >> ETHRX_length_b)   /* Length of the received packet */
-+
-+#endif //__IDT_RC32438_ETH_V_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_gpio.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_gpio.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_gpio.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_gpio.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,257 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Definitions for IDT RC32438 GPIO.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+#ifndef __IDT_RC32438_GPIO_H__
-+#define __IDT_RC32438_GPIO_H__ 
-+enum
-+{
-+	GPIO0_PhysicalAddress	= 0x18048000,
-+	GPIO_PhysicalAddress	= GPIO0_PhysicalAddress,	// Default
-+
-+	GPIO0_VirtualAddress	= 0xb8048000,
-+	GPIO_VirtualAddress	= GPIO0_VirtualAddress,		// Default
-+} ;
-+
-+typedef struct
-+{
-+	u32   gpiofunc;   /* GPIO Function Register
-+			   * gpiofunc[x]==0 bit = gpio
-+			   * func[x]==1  bit = altfunc
-+			   */
-+	u32   gpiocfg;	  /* GPIO Configuration Register
-+			   * gpiocfg[x]==0 bit = input
-+			   * gpiocfg[x]==1 bit = output
-+			   */
-+	u32   gpiod;	  /* GPIO Data Register
-+			   * gpiod[x] read/write gpio pinX status
-+			   */
-+	u32   gpioilevel; /* GPIO Interrupt Status Register
-+			   * interrupt level (see gpioistat)
-+			   */
-+	u32   gpioistat;  /* Gpio Interrupt Status Register
-+			   * istat[x] = (gpiod[x] == level[x])
-+			   * cleared in ISR (STICKY bits)
-+			   */
-+	u32   gpionmien;  /* GPIO Non-maskable Interrupt Enable Register */
-+} volatile * GPIO_t ;
-+
-+typedef enum
-+{
-+	GPIO_gpio_v		= 0,		// gpiofunc use pin as GPIO.
-+	GPIO_alt_v		= 1,		// gpiofunc use pin as alt.
-+	GPIO_input_v		= 0,		// gpiocfg use pin as input.
-+	GPIO_output_v		= 1,		// gpiocfg use pin as output.
-+	GPIO_pin0_b		= 0,
-+	GPIO_pin0_m		= 0x00000001,
-+	GPIO_pin1_b		= 1,
-+	GPIO_pin1_m		= 0x00000002,
-+	GPIO_pin2_b		= 2,
-+	GPIO_pin2_m		= 0x00000004,
-+	GPIO_pin3_b		= 3,
-+	GPIO_pin3_m		= 0x00000008,
-+	GPIO_pin4_b		= 4,
-+	GPIO_pin4_m		= 0x00000010,
-+	GPIO_pin5_b		= 5,
-+	GPIO_pin5_m		= 0x00000020,
-+	GPIO_pin6_b		= 6,
-+	GPIO_pin6_m		= 0x00000040,
-+	GPIO_pin7_b		= 7,
-+	GPIO_pin7_m		= 0x00000080,
-+	GPIO_pin8_b		= 8,
-+	GPIO_pin8_m		= 0x00000100,
-+	GPIO_pin9_b		= 9,
-+	GPIO_pin9_m		= 0x00000200,
-+	GPIO_pin10_b		= 10,
-+	GPIO_pin10_m		= 0x00000400,
-+	GPIO_pin11_b		= 11,
-+	GPIO_pin11_m		= 0x00000800,
-+	GPIO_pin12_b		= 12,
-+	GPIO_pin12_m		= 0x00001000,
-+	GPIO_pin13_b		= 13,
-+	GPIO_pin13_m		= 0x00002000,
-+	GPIO_pin14_b		= 14,
-+	GPIO_pin14_m		= 0x00004000,
-+	GPIO_pin15_b		= 15,
-+	GPIO_pin15_m		= 0x00008000,
-+	GPIO_pin16_b		= 16,
-+	GPIO_pin16_m		= 0x00010000,
-+	GPIO_pin17_b		= 17,
-+	GPIO_pin17_m		= 0x00020000,
-+	GPIO_pin18_b		= 18,
-+	GPIO_pin18_m		= 0x00040000,
-+	GPIO_pin19_b		= 19,
-+	GPIO_pin19_m		= 0x00080000,
-+	GPIO_pin20_b		= 20,
-+	GPIO_pin20_m		= 0x00100000,
-+	GPIO_pin21_b		= 21,
-+	GPIO_pin21_m		= 0x00200000,
-+	GPIO_pin22_b		= 22,
-+	GPIO_pin22_m		= 0x00400000,
-+	GPIO_pin23_b		= 23,
-+	GPIO_pin23_m		= 0x00800000,
-+	GPIO_pin24_b		= 24,
-+	GPIO_pin24_m		= 0x01000000,
-+	GPIO_pin25_b		= 25,
-+	GPIO_pin25_m		= 0x02000000,
-+	GPIO_pin26_b		= 26,
-+	GPIO_pin26_m		= 0x04000000,
-+	GPIO_pin27_b		= 27,
-+	GPIO_pin27_m		= 0x08000000,
-+	GPIO_pin28_b		= 28,
-+	GPIO_pin28_m		= 0x10000000,
-+	GPIO_pin29_b		= 29,
-+	GPIO_pin29_m		= 0x20000000,
-+	GPIO_pin30_b		= 30,
-+	GPIO_pin30_m		= 0x40000000,
-+	GPIO_pin31_b		= 31,
-+	GPIO_pin31_m		= 0x80000000,
-+
-+// Alternate function pins.  Corrsponding gpiofunc bit set to GPIO_alt_v.
-+
-+	GPIO_u0sout_b		= GPIO_pin0_b,		// UART 0 serial out.
-+	GPIO_u0sout_m		= GPIO_pin0_m,
-+		GPIO_u0sout_cfg_v	= GPIO_output_v,
-+	GPIO_u0sinp_b	= GPIO_pin1_b,			// UART 0 serial in.
-+	GPIO_u0sinp_m	= GPIO_pin1_m,
-+		GPIO_u0sinp_cfg_v	= GPIO_input_v,
-+	GPIO_u0rin_b	= GPIO_pin2_b,			// UART 0 ring indic.
-+	GPIO_u0rin_m	= GPIO_pin2_m,
-+		GPIO_u0rin_cfg_v	= GPIO_input_v,
-+	GPIO_u0dcdn_b	= GPIO_pin3_b,			// UART 0 data carr.det.
-+	GPIO_u0dcdn_m	= GPIO_pin3_m,
-+		GPIO_u0dcdn_cfg_v	= GPIO_input_v,
-+	GPIO_u0dtrn_b	= GPIO_pin4_b,			// UART 0 data term rdy.
-+	GPIO_u0dtrn_m	= GPIO_pin4_m,
-+		GPIO_u0dtrn_cfg_v	= GPIO_output_v,
-+	GPIO_u0dsrn_b	= GPIO_pin5_b,			// UART 0 data set rdy.
-+	GPIO_u0dsrn_m	= GPIO_pin5_m,
-+		GPIO_u0dsrn_cfg_v	= GPIO_input_v,
-+	GPIO_u0rtsn_b	= GPIO_pin6_b,			// UART 0 req. to send.
-+	GPIO_u0rtsn_m	= GPIO_pin6_m,
-+		GPIO_u0rtsn_cfg_v	= GPIO_output_v,
-+	GPIO_u0ctsn_b	= GPIO_pin7_b,			// UART 0 clear to send.
-+	GPIO_u0ctsn_m	= GPIO_pin7_m,
-+		GPIO_u0ctsn_cfg_v	= GPIO_input_v,
-+
-+	GPIO_u1sout_b		= GPIO_pin8_b,		// UART 1 serial out.
-+	GPIO_u1sout_m		= GPIO_pin8_m,
-+		GPIO_u1sout_cfg_v	= GPIO_output_v,
-+	GPIO_u1sinp_b		= GPIO_pin9_b,		// UART 1 serial in.
-+	GPIO_u1sinp_m		= GPIO_pin9_m,
-+		GPIO_u1sinp_cfg_v	= GPIO_input_v,
-+	GPIO_u1dtrn_b		= GPIO_pin10_b, 	// UART 1 data term rdy.
-+	GPIO_u1dtrn_m		= GPIO_pin10_m,
-+		GPIO_u1dtrn_cfg_v	= GPIO_output_v,
-+	GPIO_u1dsrn_b		= GPIO_pin11_b, 	// UART 1 data set rdy.
-+	GPIO_u1dsrn_m		= GPIO_pin11_m,
-+		GPIO_u1dsrn_cfg_v	= GPIO_input_v,
-+	GPIO_u1rtsn_b		= GPIO_pin12_b, 	// UART 1 req. to send.
-+	GPIO_u1rtsn_m		= GPIO_pin12_m,
-+		GPIO_u1rtsn_cfg_v	= GPIO_output_v,
-+	GPIO_u1ctsn_b		= GPIO_pin13_b, 	// UART 1 clear to send.
-+	GPIO_u1ctsn_m		= GPIO_pin13_m,
-+		GPIO_u1ctsn_cfg_v	= GPIO_input_v,
-+
-+	GPIO_dmareqn0_b 	= GPIO_pin14_b, 	// Ext. DMA 0 request
-+	GPIO_dmareqn0_m 	= GPIO_pin14_m,
-+		GPIO_dmareqn0_cfg_v	= GPIO_input_v,
-+
-+	GPIO_dmareqn1_b 	= GPIO_pin15_b, 	// Ext. DMA 1 request
-+	GPIO_dmareqn1_m 	= GPIO_pin15_m,
-+		GPIO_dmareqn1_cfg_v	= GPIO_input_v,
-+
-+	GPIO_dmadonen0_b	= GPIO_pin16_b, 	// Ext. DMA 0 done
-+	GPIO_dmadonen0_m	= GPIO_pin16_m,
-+		GPIO_dmadonen0_cfg_v	= GPIO_input_v,
-+
-+	GPIO_dmadonen1_b	= GPIO_pin17_b, 	// Ext. DMA 1 done
-+	GPIO_dmadonen1_m	= GPIO_pin17_m,
-+		GPIO_dmadonen1_cfg_v	= GPIO_input_v,
-+
-+	GPIO_dmafinn0_b 	= GPIO_pin18_b, 	// Ext. DMA 0 finished
-+	GPIO_dmafinn0_m 	= GPIO_pin18_m,
-+		GPIO_dmafinn0_cfg_v	= GPIO_output_v,
-+
-+	GPIO_dmafinn1_b 	= GPIO_pin19_b, 	// Ext. DMA 1 finished
-+	GPIO_dmafinn1_m 	= GPIO_pin19_m,
-+		GPIO_dmafinn1_cfg_v	= GPIO_output_v,
-+
-+	GPIO_maddr22_b		= GPIO_pin20_b, 	// M&P bus bit 22.
-+	GPIO_maddr22_m		= GPIO_pin20_m,
-+		GPIO_maddr22_cfg_v	= GPIO_output_v,
-+
-+	GPIO_maddr23_b		= GPIO_pin21_b, 	// M&P bus bit 23.
-+	GPIO_maddr23_m		= GPIO_pin21_m,
-+		GPIO_maddr23_cfg_v	= GPIO_output_v,
-+
-+	GPIO_maddr24_b		= GPIO_pin22_b, 	// M&P bus bit 24.
-+	GPIO_maddr24_m		= GPIO_pin22_m,
-+		GPIO_maddr24_cfg_v	= GPIO_output_v,
-+
-+	GPIO_maddr25_b		= GPIO_pin23_b, 	// M&P bus bit 25.
-+	GPIO_maddr25_m		= GPIO_pin23_m,
-+		GPIO_maddr25_cfg_v	= GPIO_output_v,
-+
-+	GPIO_afspare6_b 	= GPIO_pin24_b, 	// reserved.
-+	GPIO_afspare6_m 	= GPIO_pin24_m,
-+		GPIO_afspare6_cfg_v	= GPIO_input_v,
-+	GPIO_afspare5_b 	= GPIO_pin25_b, 	// reserved.
-+	GPIO_afspare5_m 	= GPIO_pin25_m,
-+		GPIO_afspare5_cfg_v	= GPIO_input_v,
-+	GPIO_afspare4_b 	= GPIO_pin26_b, 	// reserved.
-+	GPIO_afspare4_m 	= GPIO_pin26_m,
-+		GPIO_afspare4_cfg_v	= GPIO_input_v,
-+	GPIO_afspare3_b 	= GPIO_pin27_b, 	// reserved.
-+	GPIO_afspare3_m 	= GPIO_pin27_m,
-+		GPIO_afspare3_cfg_v	= GPIO_input_v,
-+	GPIO_afspare2_b 	= GPIO_pin28_b, 	// reserved.
-+	GPIO_afspare2_m 	= GPIO_pin28_m,
-+		GPIO_afspare2_cfg_v	= GPIO_input_v,
-+	GPIO_afspare1_b 	= GPIO_pin29_b, 	// reserved.
-+	GPIO_afspare1_m 	= GPIO_pin29_m,
-+		GPIO_afspare1_cfg_v	= GPIO_input_v,
-+
-+	GPIO_pcimuintn_b	= GPIO_pin30_b, 	// PCI messaging int.
-+	GPIO_pcimuintn_m	= GPIO_pin30_m,
-+		GPIO_pcimuintn_cfg_v	= GPIO_output_v,
-+
-+	GPIO_rngclk_b		= GPIO_pin31_b, 	// RNG external clock
-+	GPIO_rngclk_m		= GPIO_pin31_m,
-+		GPIO_rncclk_cfg_v	= GPIO_input_v,
-+} GPIO_DEFS_t;
-+
-+#endif //__IDT_RC32438_GPIO_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,152 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Definitions for IDT RC32438 CPU.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __IDT_RC32438_H__
-+#define  __IDT_RC32438_H__
-+#include <linux/config.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+#include <asm/idt-boards/rc32438/rc32438_timer.h>
-+
-+#define RC32438_REG_BASE   0x18000000
-+
-+#define interrupt ((volatile INT_t ) INT0_VirtualAddress)
-+#define idttimer     ((volatile TIM_t)  TIM0_VirtualAddress)
-+#define idt_gpio	  ((volatile GPIO_t) GPIO0_VirtualAddress)
-+
-+#define IDT_CLOCK_MULT 2
-+#define MIPS_CPU_TIMER_IRQ 7
-+/* Interrupt Controller */
-+#define IC_GROUP0_PEND     (RC32438_REG_BASE + 0x38000)
-+#define IC_GROUP0_MASK     (RC32438_REG_BASE + 0x38008)
-+#define IC_GROUP_OFFSET    0x0C
-+#define RTC_BASE           0xAC0801FF0
-+
-+#define NUM_INTR_GROUPS    5
-+/* 16550 UARTs */
-+
-+#define GROUP0_IRQ_BASE 8		/* GRP2 IRQ numbers start here */
-+#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32) /* GRP3 IRQ numbers start here */
-+#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32) /* GRP4 IRQ numbers start here */
-+#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32)	/* GRP5 IRQ numbers start here */
-+#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32)
-+
-+#ifdef __MIPSEB__
-+#define RC32438_UART0_BASE (RC32438_REG_BASE + 0x50003)
-+#define RC32438_UART1_BASE (RC32438_REG_BASE + 0x50023)
-+#else
-+#define RC32438_UART0_BASE (RC32438_REG_BASE + 0x50000)
-+#define RC32438_UART1_BASE (RC32438_REG_BASE + 0x50020)
-+#endif
-+
-+#define RC32438_UART0_IRQ  GROUP3_IRQ_BASE + 0
-+#define RC32438_UART1_IRQ  GROUP3_IRQ_BASE + 3
-+
-+#define RC32438_NR_IRQS  (GROUP4_IRQ_BASE + 32)
-+
-+
-+
-+/* cpu pipeline flush */
-+static inline void rc32438_sync(void)
-+{
-+        __asm__ volatile ("sync");
-+}
-+
-+static inline void rc32438_sync_udelay(int us)
-+{
-+        __asm__ volatile ("sync");
-+        udelay(us);
-+}
-+
-+static inline void rc32438_sync_delay(int ms)
-+{
-+        __asm__ volatile ("sync");
-+        mdelay(ms);
-+}
-+
-+/*
-+ * Macros to access internal RC32438 registers. No byte
-+ * swapping should be done when accessing the internal
-+ * registers.
-+ */
-+
-+#define rc32438_readb __raw_readb
-+#define rc32438_readw __raw_readw
-+#define rc32438_readl __raw_readl
-+
-+#define rc32438_writeb __raw_writeb
-+#define rc32438_writew __raw_writew
-+#define rc32438_writel __raw_writel
-+
-+/*
-+ * C access to CLZ and CLO instructions
-+ * (count leading zeroes/ones).
-+ */
-+static inline int rc32438_clz(unsigned long val)
-+{
-+	int ret;
-+        __asm__ volatile (
-+		".set\tnoreorder\n\t"
-+		".set\tnoat\n\t"
-+		".set\tmips32\n\t"
-+		"clz\t%0,%1\n\t"
-+                ".set\tmips0\n\t"
-+                ".set\tat\n\t"
-+                ".set\treorder"
-+                : "=r" (ret)
-+		: "r" (val));
-+
-+	return ret;
-+}
-+static inline int rc32438_clo(unsigned long val)
-+{
-+	int ret;
-+        __asm__ volatile (
-+		".set\tnoreorder\n\t"
-+		".set\tnoat\n\t"
-+		".set\tmips32\n\t"
-+		"clo\t%0,%1\n\t"
-+                ".set\tmips0\n\t"
-+                ".set\tat\n\t"
-+                ".set\treorder"
-+                : "=r" (ret)
-+		: "r" (val));
-+
-+	return ret;
-+}
-+#endif //__IDT_RC32438_H__
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_pci.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_pci.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_pci.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_pci.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,510 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Definitions for IDT RC32438 PCI.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+enum
-+{
-+	PCI0_PhysicalAddress	= 0x18080000,
-+	PCI_PhysicalAddress	= PCI0_PhysicalAddress,
-+
-+	PCI0_VirtualAddress	= 0xb8080000,
-+	PCI_VirtualAddress	= PCI0_VirtualAddress,
-+} ;
-+
-+enum
-+{
-+	PCI_LbaCount	= 4,		// Local base addresses.
-+} ;
-+
-+typedef struct
-+{
-+	u32	a ;		// Address.
-+	u32	c ;		// Control.
-+	u32	m ;		// mapping.
-+} PCI_Map_s ;
-+
-+typedef struct
-+{
-+	u32		pcic ;
-+	u32		pcis ;
-+	u32		pcism ;
-+	u32		pcicfga ;
-+	u32		pcicfgd ;
-+	PCI_Map_s	pcilba [PCI_LbaCount] ;
-+	u32		pcidac ;
-+	u32		pcidas ;
-+	u32		pcidasm ;
-+	u32		pcidad ;
-+	u32		pcidma8c ;
-+	u32		pcidma9c ;
-+	u32		pcitc ;
-+} volatile *PCI_t ;
-+
-+// PCI messaging unit.
-+enum
-+{
-+	PCIM_Count	= 2,
-+} ;
-+typedef struct
-+{
-+	u32		pciim [PCIM_Count] ;
-+	u32		pciom [PCIM_Count] ;
-+	u32		pciid ;
-+	u32		pciiic ;
-+	u32		pciiim ;
-+	u32		pciiod ;
-+	u32		pciioic ;
-+	u32		pciioim ;
-+} volatile *PCIM_t ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Control Register
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCIC_en_b	= 0,
-+	PCIC_en_m	= 0x00000001,
-+	PCIC_tnr_b	= 1,
-+	PCIC_tnr_m	= 0x00000002,
-+	PCIC_sce_b	= 2,
-+	PCIC_sce_m	= 0x00000004,
-+	PCIC_ien_b	= 3,
-+	PCIC_ien_m	= 0x00000008,
-+	PCIC_aaa_b	= 4,
-+	PCIC_aaa_m	= 0x00000010,
-+	PCIC_eap_b	= 5,
-+	PCIC_eap_m	= 0x00000020,
-+	PCIC_pcim_b	= 6,
-+	PCIC_pcim_m	= 0x000001c0,
-+		PCIC_pcim_disabled_v	= 0,
-+		PCIC_pcim_tnr_v 	= 1,	// Satellite - target not ready
-+		PCIC_pcim_suspend_v	= 2,	// Satellite - suspended CPU.
-+		PCIC_pcim_extern_v	= 3,	// Host - external arbiter.
-+		PCIC_pcim_fixed_v	= 4,	// Host - fixed priority arb.
-+		PCIC_pcim_roundrobin_v	= 5,	// Host - round robin priority.
-+		PCIC_pcim_reserved6_v	= 6,
-+		PCIC_pcim_reserved7_v	= 7,
-+	PCIC_igm_b	= 9,
-+	PCIC_igm_m	= 0x00000200,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Status Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCIS_eed_b	= 0,
-+	PCIS_eed_m	= 0x00000001,
-+	PCIS_wr_b	= 1,
-+	PCIS_wr_m	= 0x00000002,
-+	PCIS_nmi_b	= 2,
-+	PCIS_nmi_m	= 0x00000004,
-+	PCIS_ii_b	= 3,
-+	PCIS_ii_m	= 0x00000008,
-+	PCIS_cwe_b	= 4,
-+	PCIS_cwe_m	= 0x00000010,
-+	PCIS_cre_b	= 5,
-+	PCIS_cre_m	= 0x00000020,
-+	PCIS_mdpe_b	= 6,
-+	PCIS_mdpe_m	= 0x00000040,
-+	PCIS_sta_b	= 7,
-+	PCIS_sta_m	= 0x00000080,
-+	PCIS_rta_b	= 8,
-+	PCIS_rta_m	= 0x00000100,
-+	PCIS_rma_b	= 9,
-+	PCIS_rma_m	= 0x00000200,
-+	PCIS_sse_b	= 10,
-+	PCIS_sse_m	= 0x00000400,
-+	PCIS_ose_b	= 11,
-+	PCIS_ose_m	= 0x00000800,
-+	PCIS_pe_b	= 12,
-+	PCIS_pe_m	= 0x00001000,
-+	PCIS_tae_b	= 13,
-+	PCIS_tae_m	= 0x00002000,
-+	PCIS_rle_b	= 14,
-+	PCIS_rle_m	= 0x00004000,
-+	PCIS_bme_b	= 15,
-+	PCIS_bme_m	= 0x00008000,
-+	PCIS_prd_b	= 16,
-+	PCIS_prd_m	= 0x00010000,
-+	PCIS_rip_b	= 17,
-+	PCIS_rip_m	= 0x00020000,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Status Mask Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCISM_eed_b		= 0,
-+	PCISM_eed_m		= 0x00000001,
-+	PCISM_wr_b		= 1,
-+	PCISM_wr_m		= 0x00000002,
-+	PCISM_nmi_b		= 2,
-+	PCISM_nmi_m		= 0x00000004,
-+	PCISM_ii_b		= 3,
-+	PCISM_ii_m		= 0x00000008,
-+	PCISM_cwe_b		= 4,
-+	PCISM_cwe_m		= 0x00000010,
-+	PCISM_cre_b		= 5,
-+	PCISM_cre_m		= 0x00000020,
-+	PCISM_mdpe_b		= 6,
-+	PCISM_mdpe_m		= 0x00000040,
-+	PCISM_sta_b		= 7,
-+	PCISM_sta_m		= 0x00000080,
-+	PCISM_rta_b		= 8,
-+	PCISM_rta_m		= 0x00000100,
-+	PCISM_rma_b		= 9,
-+	PCISM_rma_m		= 0x00000200,
-+	PCISM_sse_b		= 10,
-+	PCISM_sse_m		= 0x00000400,
-+	PCISM_ose_b		= 11,
-+	PCISM_ose_m		= 0x00000800,
-+	PCISM_pe_b		= 12,
-+	PCISM_pe_m		= 0x00001000,
-+	PCISM_tae_b		= 13,
-+	PCISM_tae_m		= 0x00002000,
-+	PCISM_rle_b		= 14,
-+	PCISM_rle_m		= 0x00004000,
-+	PCISM_bme_b		= 15,
-+	PCISM_bme_m		= 0x00008000,
-+	PCISM_prd_b		= 16,
-+	PCISM_prd_m		= 0x00010000,
-+	PCISM_rip_b		= 17,
-+	PCISM_rip_m		= 0x00020000,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Configuration Address Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCICFGA_reg_b		= 2,
-+	PCICFGA_reg_m		= 0x000000fc,
-+		PCICFGA_reg_id_v	= 0x00>>2, //use PCFGID_
-+		PCICFGA_reg_04_v	= 0x04>>2, //use PCFG04_
-+		PCICFGA_reg_08_v	= 0x08>>2, //use PCFG08_
-+		PCICFGA_reg_0C_v	= 0x0C>>2, //use PCFG0C_
-+		PCICFGA_reg_pba0_v	= 0x10>>2, //use PCIPBA_
-+		PCICFGA_reg_pba1_v	= 0x14>>2, //use PCIPBA_
-+		PCICFGA_reg_pba2_v	= 0x18>>2, //use PCIPBA_
-+		PCICFGA_reg_pba3_v	= 0x1c>>2, //use PCIPBA_
-+		PCICFGA_reg_subsystem_v = 0x2c>>2, //use PCFGSS_
-+		PCICFGA_reg_3C_v	= 0x3C>>2, //use PCFG3C_
-+		PCICFGA_reg_pba0c_v	= 0x44>>2, //use PCIPBAC_
-+		PCICFGA_reg_pba0m_v	= 0x48>>2,
-+		PCICFGA_reg_pba1c_v	= 0x4c>>2, //use PCIPBAC_
-+		PCICFGA_reg_pba1m_v	= 0x50>>2,
-+		PCICFGA_reg_pba2c_v	= 0x54>>2, //use PCIPBAC_
-+		PCICFGA_reg_pba2m_v	= 0x58>>2,
-+		PCICFGA_reg_pba3c_v	= 0x5c>>2, //use PCIPBAC_
-+		PCICFGA_reg_pba3m_v	= 0x60>>2,
-+		PCICFGA_reg_pmgt_v	= 0x64>>2,
-+	PCICFGA_func_b		= 8,
-+	PCICFGA_func_m		= 0x00000700,
-+	PCICFGA_dev_b		= 11,
-+	PCICFGA_dev_m		= 0x0000f800,
-+		PCICFGA_dev_internal_v	= 0,
-+	PCICFGA_bus_b		= 16,
-+	PCICFGA_bus_m		= 0x00ff0000,
-+		PCICFGA_bus_type0_v	= 0,	//local bus
-+	PCICFGA_en_b		= 31,		// read only
-+	PCICFGA_en_m		= 0x80000000,
-+} ;
-+
-+enum {
-+	PCFGID_vendor_b 	= 0,
-+	PCFGID_vendor_m 	= 0x0000ffff,
-+		PCFGID_vendor_IDT_v		= 0x111d,
-+	PCFGID_device_b 	= 16,
-+	PCFGID_device_m 	= 0xffff0000,
-+		PCFGID_device_Acaciade_v	= 0x0207,
-+
-+	PCFG04_command_ioena_b		= 1,
-+	PCFG04_command_ioena_m		= 0x00000001,
-+	PCFG04_command_memena_b 	= 2,
-+	PCFG04_command_memena_m 	= 0x00000002,
-+	PCFG04_command_bmena_b		= 3,
-+	PCFG04_command_bmena_m		= 0x00000004,
-+	PCFG04_command_mwinv_b		= 5,
-+	PCFG04_command_mwinv_m		= 0x00000010,
-+	PCFG04_command_parena_b 	= 7,
-+	PCFG04_command_parena_m 	= 0x00000040,
-+	PCFG04_command_serrena_b	= 9,
-+	PCFG04_command_serrena_m	= 0x00000100,
-+	PCFG04_command_fastbbena_b	= 10,
-+	PCFG04_command_fastbbena_m	= 0x00000200,
-+	PCFG04_status_b 		= 16,
-+	PCFG04_status_m 		= 0xffff0000,
-+	PCFG04_status_66MHz_b		= 21,	// 66 MHz enable
-+	PCFG04_status_66MHz_m		= 0x00200000,
-+	PCFG04_status_fbb_b		= 23,
-+	PCFG04_status_fbb_m		= 0x00800000,
-+	PCFG04_status_mdpe_b		= 24,
-+	PCFG04_status_mdpe_m		= 0x01000000,
-+	PCFG04_status_dst_b		= 25,
-+	PCFG04_status_dst_m		= 0x06000000,
-+	PCFG04_status_sta_b		= 27,
-+	PCFG04_status_sta_m		= 0x08000000,
-+	PCFG04_status_rta_b		= 28,
-+	PCFG04_status_rta_m		= 0x10000000,
-+	PCFG04_status_rma_b		= 29,
-+	PCFG04_status_rma_m		= 0x20000000,
-+	PCFG04_status_sse_b		= 30,
-+	PCFG04_status_sse_m		= 0x40000000,
-+	PCFG04_status_pe_b		= 31,
-+	PCFG04_status_pe_m		= 0x40000000,
-+
-+	PCFG08_revId_b			= 0,
-+	PCFG08_revId_m			= 0x000000ff,
-+	PCFG08_classCode_b		= 0,
-+	PCFG08_classCode_m		= 0xffffff00,
-+		PCFG08_classCode_bridge_v	= 06,
-+		PCFG08_classCode_proc_v 	= 0x0b3000, // processor-MIPS
-+	PCFG0C_cacheline_b		= 0,
-+	PCFG0C_cacheline_m		= 0x000000ff,
-+	PCFG0C_masterLatency_b		= 8,
-+	PCFG0C_masterLatency_m		= 0x0000ff00,
-+	PCFG0C_headerType_b		= 16,
-+	PCFG0C_headerType_m		= 0x00ff0000,
-+	PCFG0C_bist_b			= 24,
-+	PCFG0C_bist_m			= 0xff000000,
-+
-+	PCIPBA_msi_b			= 0,
-+	PCIPBA_msi_m			= 0x00000001,
-+	PCIPBA_p_b			= 3,
-+	PCIPBA_p_m			= 0x00000004,
-+	PCIPBA_baddr_b			= 8,
-+	PCIPBA_baddr_m			= 0xffffff00,
-+
-+	PCFGSS_vendorId_b		= 0,
-+	PCFGSS_vendorId_m		= 0x0000ffff,
-+	PCFGSS_id_b			= 16,
-+	PCFGSS_id_m			= 0xffff0000,
-+
-+	PCFG3C_interruptLine_b		= 0,
-+	PCFG3C_interruptLine_m		= 0x000000ff,
-+	PCFG3C_interruptPin_b		= 8,
-+	PCFG3C_interruptPin_m		= 0x0000ff00,
-+	PCFG3C_minGrant_b		= 16,
-+	PCFG3C_minGrant_m		= 0x00ff0000,
-+	PCFG3C_maxLat_b 		= 24,
-+	PCFG3C_maxLat_m 		= 0xff000000,
-+
-+	PCIPBAC_msi_b			= 0,
-+	PCIPBAC_msi_m			= 0x00000001,
-+	PCIPBAC_p_b			= 1,
-+	PCIPBAC_p_m			= 0x00000002,
-+	PCIPBAC_size_b			= 2,
-+	PCIPBAC_size_m			= 0x0000007c,
-+	PCIPBAC_sb_b			= 7,
-+	PCIPBAC_sb_m			= 0x00000080,
-+	PCIPBAC_pp_b			= 8,
-+	PCIPBAC_pp_m			= 0x00000100,
-+	PCIPBAC_mr_b			= 9,
-+	PCIPBAC_mr_m			= 0x00000600,
-+		PCIPBAC_mr_read_v	=0,	//no prefetching
-+		PCIPBAC_mr_readLine_v	=1,
-+		PCIPBAC_mr_readMult_v	=2,
-+	PCIPBAC_mrl_b			= 11,
-+	PCIPBAC_mrl_m			= 0x00000800,
-+	PCIPBAC_mrm_b			= 12,
-+	PCIPBAC_mrm_m			= 0x00001000,
-+	PCIPBAC_trp_b			= 13,
-+	PCIPBAC_trp_m			= 0x00002000,
-+
-+	PCFG40_trdyTimeout_b		= 0,
-+	PCFG40_trdyTimeout_m		= 0x000000ff,
-+	PCFG40_retryLim_b		= 8,
-+	PCFG40_retryLim_m		= 0x0000ff00,
-+};
-+
-+/*******************************************************************************
-+ *
-+ * PCI Local Base Address [0|1|2|3] Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCILBA_baddr_b		= 0,		// In PCI_t -> pcilba [] .a
-+	PCILBA_baddr_m		= 0xffffff00,
-+} ;
-+/*******************************************************************************
-+ *
-+ * PCI Local Base Address Control Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCILBAC_msi_b		= 0,		// In pPci->pcilba[i].c
-+	PCILBAC_msi_m		= 0x00000001,
-+		PCILBAC_msi_mem_v	= 0,
-+		PCILBAC_msi_io_v	= 1,
-+	PCILBAC_size_b		= 2,	// In pPci->pcilba[i].c
-+	PCILBAC_size_m		= 0x0000007c,
-+	PCILBAC_sb_b		= 7,	// In pPci->pcilba[i].c
-+	PCILBAC_sb_m		= 0x00000080,
-+	PCILBAC_rt_b		= 8,	// In pPci->pcilba[i].c
-+	PCILBAC_rt_m		= 0x00000100,
-+		PCILBAC_rt_noprefetch_v = 0, // mem read
-+		PCILBAC_rt_prefetch_v	= 1, // mem readline
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Local Base Address [0|1|2|3] Mapping Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCILBAM_maddr_b 	= 8,
-+	PCILBAM_maddr_m 	= 0xffffff00,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Decoupled Access Control Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCIDAC_den_b		= 0,
-+	PCIDAC_den_m		= 0x00000001,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI Decoupled Access Status Register
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCIDAS_d_b	= 0,
-+	PCIDAS_d_m	= 0x00000001,
-+	PCIDAS_b_b	= 1,
-+	PCIDAS_b_m	= 0x00000002,
-+	PCIDAS_e_b	= 2,
-+	PCIDAS_e_m	= 0x00000004,
-+	PCIDAS_ofe_b	= 3,
-+	PCIDAS_ofe_m	= 0x00000008,
-+	PCIDAS_off_b	= 4,
-+	PCIDAS_off_m	= 0x00000010,
-+	PCIDAS_ife_b	= 5,
-+	PCIDAS_ife_m	= 0x00000020,
-+	PCIDAS_iff_b	= 6,
-+	PCIDAS_iff_m	= 0x00000040,
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI DMA Channel 8 Configuration Register
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCIDMA8C_mbs_b	= 0,		// Maximum Burst Size.
-+	PCIDMA8C_mbs_m	= 0x00000fff,	// { pcidma8c }
-+	PCIDMA8C_our_b	= 12,		// Optimize Unaligned Burst Reads.
-+	PCIDMA8C_our_m	= 0x00001000,	// { pcidma8c }
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI DMA Channel 9 Configuration Register
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCIDMA9C_mbs_b	= 0,		// Maximum Burst Size.
-+	PCIDMA9C_mbs_m	= 0x00000fff, // { pcidma9c }
-+} ;
-+
-+/*******************************************************************************
-+ *
-+ * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors
-+ *
-+ ******************************************************************************/
-+enum {
-+	PCIDMAD_pt_b		= 22,		// in DEVCMD field (descriptor)
-+	PCIDMAD_pt_m		= 0x00c00000,	// preferred transaction field
-+		// These are for reads (DMA channel 8)
-+		PCIDMAD_devcmd_mr_v	= 0,	//memory read
-+		PCIDMAD_devcmd_mrl_v	= 1,	//memory read line
-+		PCIDMAD_devcmd_mrm_v	= 2,	//memory read multiple
-+		PCIDMAD_devcmd_ior_v	= 3,	//I/O read
-+		// These are for writes (DMA channel 9)
-+		PCIDMAD_devcmd_mw_v	= 0,	//memory write
-+		PCIDMAD_devcmd_mwi_v	= 1,	//memory write invalidate
-+		PCIDMAD_devcmd_iow_v	= 3,	//I/O write
-+
-+	// Swap byte field applies to both DMA channel 8 and 9
-+	PCIDMAD_sb_b		= 24,		// in DEVCMD field (descriptor)
-+	PCIDMAD_sb_m		= 0x01000000,	// swap byte field
-+} ;
-+
-+
-+/*******************************************************************************
-+ *
-+ * PCI Target Control Register
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCITC_rtimer_b		= 0,		// In PCITC_t -> pcitc
-+	PCITC_rtimer_m		= 0x000000ff,
-+	PCITC_dtimer_b		= 8,		// In PCITC_t -> pcitc
-+	PCITC_dtimer_m		= 0x0000ff00,
-+	PCITC_rdr_b		= 18,		// In PCITC_t -> pcitc
-+	PCITC_rdr_m		= 0x00040000,
-+	PCITC_ddt_b		= 19,		// In PCITC_t -> pcitc
-+	PCITC_ddt_m		= 0x00080000,
-+} ;
-+/*******************************************************************************
-+ *
-+ * PCI messaging unit [applies to both inbound and outbound registers ]
-+ *
-+ ******************************************************************************/
-+enum
-+{
-+	PCIM_m0_b	= 0,		// In PCIM_t -> {pci{iic,iim,ioic,ioim}}
-+	PCIM_m0_m	= 0x00000001,	// inbound or outbound message 0
-+	PCIM_m1_b	= 1,		// In PCIM_t -> {pci{iic,iim,ioic,ioim}}
-+	PCIM_m1_m	= 0x00000002,	// inbound or outbound message 1
-+	PCIM_db_b	= 2,		// In PCIM_t -> {pci{iic,iim,ioic,ioim}}
-+	PCIM_db_m	= 0x00000004,	// inbound or outbound doorbell
-+};
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_pci_v.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_pci_v.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_pci_v.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_pci_v.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,190 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *   Definitions for IDT RC32438 PCI setup.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#define PCI_MSG_VirtualAddress	     0xB8088010
-+#define rc32438_pci ((volatile PCI_t) PCI0_VirtualAddress)
-+#define rc32438_pci_msg ((volatile PCIM_t) PCI_MSG_VirtualAddress)
-+
-+#define PCIM_SHFT		0x6
-+#define PCIM_BIT_LEN		0x7
-+#define PCIM_H_EA		0x3
-+#define PCIM_H_IA_FIX		0x4
-+#define PCIM_H_IA_RR		0x5
-+
-+#define PCI_ADDR_START		0x50000000
-+
-+#define CPUTOPCI_MEM_WIN	0x02000000
-+#define CPUTOPCI_IO_WIN		0x00100000
-+#define PCILBA_SIZE_SHFT	2
-+#define PCILBA_SIZE_MASK	0x1F
-+#define SIZE_256MB		0x1C
-+#define SIZE_128MB		0x1B
-+#define SIZE_64MB               0x1A
-+#define SIZE_32MB		0x19
-+#define SIZE_16MB               0x18
-+#define SIZE_4MB		0x16
-+#define SIZE_2MB		0x15
-+#define SIZE_1MB		0x14
-+#define ACACIA_CONFIG0_ADDR	0x80000000
-+#define ACACIA_CONFIG1_ADDR	0x80000004
-+#define ACACIA_CONFIG2_ADDR	0x80000008
-+#define ACACIA_CONFIG3_ADDR	0x8000000C
-+#define ACACIA_CONFIG4_ADDR	0x80000010
-+#define ACACIA_CONFIG5_ADDR	0x80000014
-+#define ACACIA_CONFIG6_ADDR	0x80000018
-+#define ACACIA_CONFIG7_ADDR	0x8000001C
-+#define ACACIA_CONFIG8_ADDR	0x80000020
-+#define ACACIA_CONFIG9_ADDR	0x80000024
-+#define ACACIA_CONFIG10_ADDR	0x80000028
-+#define ACACIA_CONFIG11_ADDR	0x8000002C
-+#define ACACIA_CONFIG12_ADDR	0x80000030
-+#define ACACIA_CONFIG13_ADDR	0x80000034
-+#define ACACIA_CONFIG14_ADDR	0x80000038
-+#define ACACIA_CONFIG15_ADDR	0x8000003C
-+#define ACACIA_CONFIG16_ADDR	0x80000040
-+#define ACACIA_CONFIG17_ADDR	0x80000044
-+#define ACACIA_CONFIG18_ADDR	0x80000048
-+#define ACACIA_CONFIG19_ADDR	0x8000004C
-+#define ACACIA_CONFIG20_ADDR	0x80000050
-+#define ACACIA_CONFIG21_ADDR	0x80000054
-+#define ACACIA_CONFIG22_ADDR	0x80000058
-+#define ACACIA_CONFIG23_ADDR	0x8000005C
-+#define ACACIA_CONFIG24_ADDR	0x80000060
-+#define ACACIA_CONFIG25_ADDR	0x80000064
-+#define ACACIA_CMD 		(PCFG04_command_ioena_m | \
-+				 PCFG04_command_memena_m | \
-+				 PCFG04_command_bmena_m | \
-+				 PCFG04_command_mwinv_m | \
-+				 PCFG04_command_parena_m | \
-+				 PCFG04_command_serrena_m )
-+
-+#define ACACIA_STAT		(PCFG04_status_mdpe_m | \
-+				 PCFG04_status_sta_m  | \
-+				 PCFG04_status_rta_m  | \
-+				 PCFG04_status_rma_m  | \
-+				 PCFG04_status_sse_m  | \
-+				 PCFG04_status_pe_m)
-+
-+#define ACACIA_CNFG1		((ACACIA_STAT<<16)|ACACIA_CMD)
-+
-+#define ACACIA_REVID		0
-+#define ACACIA_CLASS_CODE	0
-+#define ACACIA_CNFG2		((ACACIA_CLASS_CODE<<8) | \
-+				  ACACIA_REVID)
-+
-+#define ACACIA_CACHE_LINE_SIZE	4
-+#define ACACIA_MASTER_LAT	0x3c
-+#define ACACIA_HEADER_TYPE	0
-+#define ACACIA_BIST		0
-+
-+#define ACACIA_CNFG3 ((ACACIA_BIST << 24) | \
-+		      (ACACIA_HEADER_TYPE<<16) | \
-+		      (ACACIA_MASTER_LAT<<8) | \
-+		      ACACIA_CACHE_LINE_SIZE )
-+
-+#define ACACIA_BAR0	0x00000008 /* 128 MB Memory */
-+#define ACACIA_BAR1	0x18800001 /* 1 MB IO */
-+#define ACACIA_BAR2	0x18000001 /* 2 MB IO window for Acacia
-+					internal Registers */
-+#define ACACIA_BAR3	0x48000008 /* Spare 128 MB Memory */
-+
-+#define ACACIA_CNFG4	ACACIA_BAR0
-+#define ACACIA_CNFG5    ACACIA_BAR1
-+#define ACACIA_CNFG6 	ACACIA_BAR2
-+#define ACACIA_CNFG7	ACACIA_BAR3
-+
-+#define ACACIA_SUBSYS_VENDOR_ID 0
-+#define ACACIA_SUBSYSTEM_ID	0
-+#define ACACIA_CNFG8		0
-+#define ACACIA_CNFG9		0
-+#define ACACIA_CNFG10		0
-+#define ACACIA_CNFG11 	((ACACIA_SUBSYS_VENDOR_ID<<16) | \
-+			  ACACIA_SUBSYSTEM_ID)
-+#define ACACIA_INT_LINE		1
-+#define ACACIA_INT_PIN		1
-+#define ACACIA_MIN_GNT		8
-+#define ACACIA_MAX_LAT		0x38
-+#define ACACIA_CNFG12		0
-+#define ACACIA_CNFG13 		0
-+#define ACACIA_CNFG14		0
-+#define ACACIA_CNFG15	((ACACIA_MAX_LAT<<24) | \
-+			 (ACACIA_MIN_GNT<<16) | \
-+			 (ACACIA_INT_PIN<<8)  | \
-+			  ACACIA_INT_LINE)
-+#define	ACACIA_RETRY_LIMIT	0x80
-+#define ACACIA_TRDY_LIMIT	0x80
-+#define ACACIA_CNFG16 ((ACACIA_RETRY_LIMIT<<8) | \
-+			ACACIA_TRDY_LIMIT)
-+#define PCI_PBAxC_R		0x0
-+#define PCI_PBAxC_RL		0x1
-+#define PCI_PBAxC_RM		0x2
-+#define SIZE_SHFT		2
-+
-+#define ACACIA_PBA0C	( PCIPBAC_mrl_m | PCIPBAC_sb_m | \
-+			  ((PCI_PBAxC_RM &0x3) << PCIPBAC_mr_b) | \
-+			  PCIPBAC_pp_m | \
-+			  (SIZE_128MB<<SIZE_SHFT) | \
-+			   PCIPBAC_p_m)
-+
-+#define ACACIA_CNFG17	ACACIA_PBA0C
-+#define ACACIA_PBA0M	0x0
-+#define ACACIA_CNFG18	ACACIA_PBA0M
-+
-+#define ACACIA_PBA1C	((SIZE_1MB<<SIZE_SHFT) | PCIPBAC_sb_m | \
-+			  PCIPBAC_msi_m)
-+
-+#define ACACIA_CNFG19	ACACIA_PBA1C
-+#define ACACIA_PBA1M	0x0
-+#define ACACIA_CNFG20	ACACIA_PBA1M
-+
-+#define ACACIA_PBA2C	((SIZE_2MB<<SIZE_SHFT) | PCIPBAC_sb_m | \
-+			  PCIPBAC_msi_m)
-+
-+#define ACACIA_CNFG21	ACACIA_PBA2C
-+#define ACACIA_PBA2M	0x18000000
-+#define ACACIA_CNFG22	ACACIA_PBA2M
-+#define ACACIA_PBA3C	0
-+#define ACACIA_CNFG23	ACACIA_PBA3C
-+#define ACACIA_PBA3M	0
-+#define ACACIA_CNFG24	ACACIA_PBA3M
-+
-+
-+
-+#define	PCITC_DTIMER_VAL	8
-+#define PCITC_RTIMER_VAL	0x10
-+
-diff -Nur linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_timer.h linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_timer.h
---- linux-2.6.16/include/asm-mips/idt-boards/rc32438/rc32438_timer.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/idt-boards/rc32438/rc32438_timer.h	2006-03-20 14:25:10.000000000 +0100
-@@ -0,0 +1,91 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *    Timer register definition IDT RC32438 CPU.
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 P. Sadik.
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+ 
-+#ifndef __IDT_RC32438_TIM_H__
-+#define __IDT_RC32438_TIM_H__
-+
-+enum
-+{
-+	TIM0_PhysicalAddress	= 0x18028000,
-+	TIM_PhysicalAddress	= TIM0_PhysicalAddress,		// Default
-+
-+	TIM0_VirtualAddress	= 0xb8028000,
-+	TIM_VirtualAddress	= TIM0_VirtualAddress,		// Default
-+} ;
-+
-+enum
-+{
-+	TIM_Count = 3,
-+} ;
-+
-+struct TIM_CNTR_s
-+{
-+	u32 count ;
-+	u32 compare ;
-+	u32 ctc ;	//use CTC_
-+} ;
-+
-+typedef struct TIM_s
-+{
-+	struct TIM_CNTR_s	tim [TIM_Count] ;
-+	u32			rcount ;	//use RCOUNT_
-+	u32			rcompare ;	//use RCOMPARE_
-+	u32			rtc ;		//use RTC_
-+} volatile * TIM_t ;
-+
-+enum
-+{
-+	CTC_en_b	= 0,		
-+	CTC_en_m	= 0x00000001,
-+	CTC_to_b	= 1,		 
-+	CTC_to_m	= 0x00000002,
-+
-+	RCOUNT_count_b		= 0,	     
-+	RCOUNT_count_m		= 0x0000ffff,
-+	RCOMPARE_compare_b	= 0,	   
-+	RCOMPARE_compare_m	= 0x0000ffff,
-+	RTC_ce_b		= 0,		
-+	RTC_ce_m		= 0x00000001,
-+	RTC_to_b		= 1,		
-+	RTC_to_m		= 0x00000002,
-+	RTC_rqe_b		= 2,		
-+	RTC_rqe_m		= 0x00000004,
-+				 
-+} ;
-+#endif	//__IDT_RC32438_TIM_H__
-+
-diff -Nur linux-2.6.16/include/asm-mips/mach-generic/irq.h linux-2.6.16-owrt/include/asm-mips/mach-generic/irq.h
---- linux-2.6.16/include/asm-mips/mach-generic/irq.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/mach-generic/irq.h	2006-03-20 14:25:10.000000000 +0100
-@@ -8,6 +8,6 @@
- #ifndef __ASM_MACH_GENERIC_IRQ_H
- #define __ASM_MACH_GENERIC_IRQ_H
- 
--#define NR_IRQS	128
-+#define NR_IRQS	256
- 
- #endif /* __ASM_MACH_GENERIC_IRQ_H */
-diff -Nur linux-2.6.16/include/linux/init.h linux-2.6.16-owrt/include/linux/init.h
---- linux-2.6.16/include/linux/init.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/init.h	2006-03-20 14:25:10.000000000 +0100
-@@ -86,6 +86,8 @@
- 	static initcall_t __initcall_##fn __attribute_used__ \
- 	__attribute__((__section__(".initcall" level ".init"))) = fn
- 
-+#define early_initcall(fn)              __define_initcall(".early1",fn)
-+
- #define core_initcall(fn)		__define_initcall("1",fn)
- #define postcore_initcall(fn)		__define_initcall("2",fn)
- #define arch_initcall(fn)		__define_initcall("3",fn)
-diff -Nur linux-2.6.16/include/linux/kernel.h linux-2.6.16-owrt/include/linux/kernel.h
---- linux-2.6.16/include/linux/kernel.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/kernel.h	2006-03-20 14:25:10.000000000 +0100
-@@ -324,6 +324,7 @@
- };
- 
- /* Force a compilation error if condition is true */
-+extern void BUILD_BUG(void);
- #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
- 
- /* Trap pasters of __FUNCTION__ at compile-time */
diff --git a/openwrt/target/linux/aruba-2.6/patches/001-flash.patch b/openwrt/target/linux/aruba-2.6/patches/001-flash.patch
deleted file mode 100644
index f0b951370d..0000000000
--- a/openwrt/target/linux/aruba-2.6/patches/001-flash.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-diff -Nur linux-2.6.15/arch/mips/aruba/flash_lock.c linux-2.6.15-openwrt/arch/mips/aruba/flash_lock.c
---- linux-2.6.15/arch/mips/aruba/flash_lock.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-openwrt/arch/mips/aruba/flash_lock.c	2006-01-10 00:32:32.000000000 +0100
-@@ -0,0 +1,27 @@
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <asm/bootinfo.h>
-+
-+#define AP70_PROT_ADDR 0xb8010008
-+#define AP70_PROT_DATA 0x8
-+#define AP60_PROT_ADDR 0xB8400000
-+#define AP60_PROT_DATA 0x04000000
-+
-+void unlock_ap60_70_flash(void)
-+{
-+	volatile __u32 val;
-+	switch (mips_machtype) {
-+		case MACH_ARUBA_AP70:
-+			val = *(volatile __u32 *)AP70_PROT_ADDR;
-+			val &= ~(AP70_PROT_DATA);
-+			*(volatile __u32 *)AP70_PROT_ADDR = val;
-+			break;
-+		case MACH_ARUBA_AP65:
-+		case MACH_ARUBA_AP60:
-+		default:
-+			val = *(volatile __u32 *)AP60_PROT_ADDR;
-+			val &= ~(AP60_PROT_DATA);
-+			*(volatile __u32 *)AP60_PROT_ADDR = val;
-+			break;
-+	}
-+}
-diff -Nur linux-2.6.15/drivers/mtd/chips/cfi_probe.c linux-2.6.15-openwrt/drivers/mtd/chips/cfi_probe.c
---- linux-2.6.15/drivers/mtd/chips/cfi_probe.c	2006-01-03 04:21:10.000000000 +0100
-+++ linux-2.6.15-openwrt/drivers/mtd/chips/cfi_probe.c	2006-01-10 00:32:32.000000000 +0100
-@@ -26,6 +26,74 @@
- static void print_cfi_ident(struct cfi_ident *);
- #endif
- 
-+#if 1
-+
-+#define AMD_AUTOSEL_OFF1	0xAAA
-+#define AMD_AUTOSEL_OFF2	0x555
-+#define AMD_MANUF_ID		0x1
-+#define AMD_DEVICE_ID1		0xF6 /* T */
-+#define AMD_DEVICE_ID2		0xF9 /* B */
-+/* Foll. are definitions for Macronix Flash Part */
-+#define MCX_MANUF_ID		0xC2
-+#define MCX_DEVICE_ID1		0xA7
-+#define MCX_DEVICE_ID2		0xA8
-+/* Foll. common to both AMD and Macronix */
-+#define FACTORY_LOCKED		0x99
-+#define USER_LOCKED		0x19
-+
-+/* NOTE: AP-70/6x use BYTE mode flash access. Therefore the
-+ * lowest Addr. pin in the flash is not A0 but A-1 (A minus 1).
-+ * CPU's A0 is tied to Flash's A-1, A1 to A0 and so on. This
-+ * gives 4MB of byte-addressable mem. In byte mode, all addr
-+ * need to be multiplied by 2 (i.e compared to word mode).
-+ * NOTE: AMD_AUTOSEL_OFF1 and OFF2 are already mult. by 2
-+ * Just blindly use the addr offsets suggested in the manual
-+ * for byte mode and you'll be OK. Offs. in Table 6 need to
-+ * be mult by 2 (for getting autosel params)
-+ */
-+void
-+flash_detect(struct map_info *map, __u32 base, struct cfi_private *cfi)
-+{
-+	map_word val[3];
-+	int osf = cfi->interleave * cfi->device_type; // =2 for AP70/6x
-+	char *manuf, *part, *lock ;
-+
-+	if (osf != 1) return ;
-+
-+	cfi_send_gen_cmd(0xAA, AMD_AUTOSEL_OFF1, base, map, cfi, cfi->device_type, NULL);
-+	cfi_send_gen_cmd(0x55, AMD_AUTOSEL_OFF2, base, map, cfi, cfi->device_type, NULL);
-+	cfi_send_gen_cmd(0x90, AMD_AUTOSEL_OFF1, base, map, cfi, cfi->device_type, NULL);
-+	val[0] = map_read(map, base) ; // manuf ID
-+	val[1] = map_read(map, base+2) ; // device ID
-+	val[2] = map_read(map, base+6) ; // lock indicator
-+#if 0
-+printk("v1=0x%x v2=0x%x v3=0x%x\n", val[0], val[1], val[2]) ;
-+#endif
-+	if (val[0].x[0] == AMD_MANUF_ID) {
-+		manuf = "AMD Flash" ;
-+		if (val[1].x[0] == AMD_DEVICE_ID1)
-+			part = "AM29LV320D (Top)" ;
-+		else if (val[1].x[0] == AMD_DEVICE_ID2)
-+			part = "AM29LV320D (Bot)" ;
-+		else part = "Unknown" ;
-+	} else if (val[0].x[0] == MCX_MANUF_ID) {
-+		manuf = "Macronix Flash" ;
-+		if (val[1].x[0] == MCX_DEVICE_ID1)
-+			part = "MX29LV320A (Top)" ;
-+		else if (val[1].x[0] == MCX_DEVICE_ID2)
-+			part = "MX29LV320A (Bot)" ;
-+		else part = "Unknown" ;
-+	} else
-+		return ;
-+	if (val[2].x[0] == FACTORY_LOCKED)
-+		lock = "Factory Locked" ;
-+	else if (val[2].x[0] == USER_LOCKED)
-+		lock = "User Locked" ;
-+	else lock = "Unknown locking" ;
-+	printk("%s %s (%s)\n", manuf, part, lock) ;
-+}
-+#endif
-+
- static int cfi_probe_chip(struct map_info *map, __u32 base,
- 			  unsigned long *chip_map, struct cfi_private *cfi);
- static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);
-@@ -118,6 +186,10 @@
- 	}
- 
- 	xip_disable();
-+#if 1
-+	//cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-+	flash_detect(map, base, cfi) ;
-+#endif
- 	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
- 	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
- 	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
-diff -Nur linux-2.6.15/drivers/mtd/maps/physmap.c linux-2.6.15-openwrt/drivers/mtd/maps/physmap.c
---- linux-2.6.15/drivers/mtd/maps/physmap.c	2006-01-03 04:21:10.000000000 +0100
-+++ linux-2.6.15-openwrt/drivers/mtd/maps/physmap.c	2006-01-10 00:32:32.000000000 +0100
-@@ -34,15 +34,31 @@
- static struct mtd_partition *mtd_parts;
- static int                   mtd_parts_nb;
- 
--static int num_physmap_partitions;
--static struct mtd_partition *physmap_partitions;
-+static int num_physmap_partitions = 3;
-+static struct mtd_partition physmap_partitions[] = {
-+	{
-+                name:           "zImage",
-+                size:           0x3f0000-0x80000,
-+                offset:         0x80000,
-+        },
-+	{
-+                name:           "JFFS2",
-+                size:           0x3f0000-0x120000,
-+                offset:         0x120000,
-+	},
-+	{
-+		name:		"NVRAM",
-+		size:		0x2000,
-+		offset:		0x3f8000,
-+	}
-+};
- 
- static const char *part_probes[] __initdata = {"cmdlinepart", "RedBoot", NULL};
- 
- void physmap_set_partitions(struct mtd_partition *parts, int num_parts)
- {
--	physmap_partitions=parts;
--	num_physmap_partitions=num_parts;
-+//	physmap_partitions=parts;
-+//	num_physmap_partitions=num_parts;
- }
- #endif /* CONFIG_MTD_PARTITIONS */
- 
diff --git a/openwrt/target/linux/aruba-2.6/patches/002-irq.patch b/openwrt/target/linux/aruba-2.6/patches/002-irq.patch
deleted file mode 100644
index 8faffaf9bb..0000000000
--- a/openwrt/target/linux/aruba-2.6/patches/002-irq.patch
+++ /dev/null
@@ -1,524 +0,0 @@
-diff -Nur linux-2.6.15/arch/mips/aruba/idtIRQ.S linux-2.6.15-openwrt/arch/mips/aruba/idtIRQ.S
---- linux-2.6.15/arch/mips/aruba/idtIRQ.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-openwrt/arch/mips/aruba/idtIRQ.S	2006-01-10 00:32:32.000000000 +0100
-@@ -0,0 +1,87 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     Intterrupt dispatcher code for IDT boards
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+		
-+	
-+#include <asm/asm.h>
-+#include <asm/mipsregs.h>
-+#include <asm/regdef.h>
-+#include <asm/stackframe.h>
-+
-+	.text
-+	.set	noreorder
-+	.set	noat
-+	.align	5
-+	NESTED(idtIRQ, PT_SIZE, sp)
-+	.set noat
-+	SAVE_ALL
-+	CLI
-+
-+	.set	at
-+	.set	noreorder
-+
-+	/* Get the pending interrupts */
-+	mfc0    t0, CP0_CAUSE
-+	nop
-+			 
-+	/* Isolate the allowed ones by anding the irq mask */
-+	mfc0    t2, CP0_STATUS
-+	move	a1, sp		/* need a nop here, hence we anticipate */
-+	andi    t0, CAUSEF_IP
-+	and     t0, t2
-+								  
-+	/* check for r4k counter/timer IRQ. */
-+	
-+	andi    t1, t0, CAUSEF_IP7
-+	beqz    t1, 1f
-+	nop
-+
-+	jal     aruba_timer_interrupt	
-+
-+	li	a0, 7
-+
-+	j	ret_from_irq
-+	nop
-+1:
-+	jal	aruba_irqdispatch
-+	move	a0, t0
-+	j	ret_from_irq
-+	nop
-+
-+	END(idtIRQ)
-+
-+
-diff -Nur linux-2.6.15/arch/mips/aruba/irq.c linux-2.6.15-openwrt/arch/mips/aruba/irq.c
---- linux-2.6.15/arch/mips/aruba/irq.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-openwrt/arch/mips/aruba/irq.c	2006-01-10 00:32:32.000000000 +0100
-@@ -0,0 +1,429 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     Interrupt routines for IDT EB434 boards / Atheros boards
-+ *     Modified by Aruba Networks
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/module.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/timex.h>
-+#include <linux/slab.h>
-+#include <linux/random.h>
-+#include <linux/delay.h>
-+
-+#include <asm/bitops.h>
-+#include <asm/bootinfo.h>
-+#include <asm/io.h>
-+#include <asm/mipsregs.h>
-+#include <asm/system.h>
-+#include <asm/idt-boards/rc32434/rc32434.h>
-+#include <asm/idt-boards/rc32434/rc32434_gpio.h>
-+
-+#include <asm/irq.h>
-+
-+#undef DEBUG_IRQ
-+#ifdef DEBUG_IRQ
-+/* note: prints function name for you */
-+#define DPRINTK(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ## args)
-+#else
-+#define DPRINTK(fmt, args...)
-+#endif
-+
-+extern asmlinkage void idtIRQ(void);
-+static unsigned int startup_irq(unsigned int irq);
-+static void end_irq(unsigned int irq_nr);
-+static void mask_and_ack_irq(unsigned int irq_nr);
-+static void aruba_enable_irq(unsigned int irq_nr);
-+static void aruba_disable_irq(unsigned int irq_nr);
-+
-+extern void __init init_generic_irq(void);
-+
-+typedef struct {
-+	u32 mask;
-+	volatile u32 *base_addr;
-+} intr_group_t;
-+
-+static const intr_group_t intr_group_merlot[NUM_INTR_GROUPS] = {
-+	{0xffffffff, (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 0)},
-+};
-+
-+#define READ_PEND_MERLOT(base) (*((volatile unsigned long *)(0xbc003010)))
-+#define READ_MASK_MERLOT(base) (*((volatile unsigned long *)(0xbc003014)))
-+#define WRITE_MASK_MERLOT(base, val) ((*((volatile unsigned long *)(0xbc003014))) = (val), READ_MASK_MERLOT())
-+
-+static const intr_group_t intr_group_muscat[NUM_INTR_GROUPS] = {
-+	{0x0000efff, (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET)},
-+	{0x00001fff, (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET)},
-+	{0x00000007, (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET)},
-+	{0x0003ffff, (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET)},
-+	{0xffffffff, (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET)}
-+};
-+
-+#define READ_PEND_MUSCAT(base) (*(base))
-+#define READ_MASK_MUSCAT(base) (*(base + 2))
-+#define WRITE_MASK_MUSCAT(base, val) (*(base + 2) = (val))
-+
-+static inline int irq_to_group(unsigned int irq_nr)
-+{
-+	switch (mips_machtype) {
-+		case MACH_ARUBA_AP70:
-+			return ((irq_nr - GROUP0_IRQ_BASE) >> 5);
-+		case MACH_ARUBA_AP65:
-+		case MACH_ARUBA_AP60:
-+		default:
-+			return 0;
-+	}
-+}
-+
-+static inline int group_to_ip(unsigned int group)
-+{
-+	switch (mips_machtype) {
-+		case MACH_ARUBA_AP70:
-+			return group + 2;
-+		case MACH_ARUBA_AP65:
-+		case MACH_ARUBA_AP60:
-+		default:
-+			return 6;
-+	}
-+}
-+
-+static inline void enable_local_irq(unsigned int ip)
-+{
-+	set_c0_status(0x100 << ip);
-+	irq_enable_hazard();
-+}
-+
-+static inline void disable_local_irq(unsigned int ip)
-+{
-+	clear_c0_status(0x100 << ip);
-+	irq_disable_hazard();
-+}
-+
-+static void aruba_enable_irq(unsigned int irq_nr)
-+{
-+	unsigned long flags;
-+	int ip = irq_nr - GROUP0_IRQ_BASE;
-+	unsigned int group, intr_bit;
-+	volatile unsigned int *addr;
-+
-+
-+	local_irq_save(flags);
-+	
-+	if (ip < 0) {
-+		enable_local_irq(irq_nr);
-+	} else {
-+		// calculate group
-+		switch (mips_machtype) {
-+			case MACH_ARUBA_AP70:
-+				group = ip >> 5;
-+				break;
-+			case MACH_ARUBA_AP65:
-+			case MACH_ARUBA_AP60:
-+			default:
-+				group = 0;
-+				break;
-+		}
-+
-+		// calc interrupt bit within group
-+		ip -= (group << 5);
-+		intr_bit = 1 << ip;
-+
-+		switch (mips_machtype) {
-+			case MACH_ARUBA_AP70:
-+				addr = intr_group_muscat[group].base_addr;
-+				WRITE_MASK_MUSCAT(addr, READ_MASK_MUSCAT(addr) & ~intr_bit);
-+				break;
-+			case MACH_ARUBA_AP65:
-+			case MACH_ARUBA_AP60:
-+			default:
-+				addr = intr_group_merlot[group].base_addr;
-+				WRITE_MASK_MERLOT(addr, READ_MASK_MERLOT(addr) | intr_bit);
-+				break;
-+		}
-+		enable_local_irq(group_to_ip(group));
-+	}
-+
-+	back_to_back_c0_hazard();
-+	local_irq_restore(flags);
-+
-+}
-+
-+static void aruba_disable_irq(unsigned int irq_nr)
-+{
-+	unsigned long flags;
-+	int ip = irq_nr - GROUP0_IRQ_BASE;
-+	unsigned int group, intr_bit, mask;
-+	volatile unsigned int *addr;
-+
-+	local_irq_save(flags);
-+
-+	if (ip < 0) {
-+		disable_local_irq(irq_nr);
-+	} else {
-+		// calculate group
-+		switch (mips_machtype) {
-+			case MACH_ARUBA_AP70:
-+				group = ip >> 5;
-+				break;
-+			case MACH_ARUBA_AP65:
-+			case MACH_ARUBA_AP60:
-+			default:
-+				group = 0;
-+				break;
-+		}
-+
-+		// calc interrupt bit within group
-+		ip -= group << 5;
-+		intr_bit = 1 << ip;
-+
-+		switch (mips_machtype) {
-+			case MACH_ARUBA_AP70:
-+				addr = intr_group_muscat[group].base_addr;
-+				// mask intr within group
-+				mask = READ_MASK_MUSCAT(addr);
-+				mask |= intr_bit;
-+				WRITE_MASK_MUSCAT(addr, mask);
-+	
-+				/*
-+				   if there are no more interrupts enabled in this
-+				   group, disable corresponding IP
-+				 */
-+				if (mask == intr_group_muscat[group].mask)
-+					disable_local_irq(group_to_ip(group));
-+				break;
-+			case MACH_ARUBA_AP65:
-+			case MACH_ARUBA_AP60:
-+			default:
-+				addr = intr_group_merlot[group].base_addr;
-+				// mask intr within group
-+				mask = READ_MASK_MERLOT(addr);
-+				mask &= ~intr_bit;
-+				if (!mask)
-+					disable_local_irq(group_to_ip(group));
-+				WRITE_MASK_MERLOT(addr, mask);
-+				break;
-+		}
-+	}
-+
-+	back_to_back_c0_hazard();
-+	local_irq_restore(flags);
-+}
-+
-+static unsigned int startup_irq(unsigned int irq_nr)
-+{
-+	aruba_enable_irq(irq_nr);
-+	return 0;
-+}
-+
-+static void shutdown_irq(unsigned int irq_nr)
-+{
-+	aruba_disable_irq(irq_nr);
-+}
-+
-+static void mask_and_ack_irq(unsigned int irq_nr)
-+{
-+	aruba_disable_irq(irq_nr);
-+}
-+
-+static void end_irq(unsigned int irq_nr)
-+{
-+
-+	int ip = irq_nr - GROUP0_IRQ_BASE;
-+	unsigned int intr_bit, group;
-+	volatile unsigned int *addr;
-+
-+
-+	if (irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS)) {
-+		printk("warning: end_irq %d did not enable (%x)\n",
-+		       irq_nr, irq_desc[irq_nr].status);
-+		/* fall through; enable the interrupt
-+		 * -- It'll get stuck otherwise
-+		 */
-+
-+	} 
-+
-+	if (ip<0) {
-+		enable_local_irq(irq_nr);
-+	} else {
-+
-+		switch (mips_machtype) {
-+			case MACH_ARUBA_AP70:
-+				if (irq_nr == GROUP4_IRQ_BASE + 9)       idt_gpio->gpioistat &= 0xfffffdff;
-+				else if (irq_nr == GROUP4_IRQ_BASE + 10) idt_gpio->gpioistat &= 0xfffffbff;
-+				else if (irq_nr == GROUP4_IRQ_BASE + 11) idt_gpio->gpioistat &= 0xfffff7ff;
-+				else if (irq_nr == GROUP4_IRQ_BASE + 12) idt_gpio->gpioistat &= 0xffffefff;
-+		
-+				group = ip >> 5;
-+			
-+				// calc interrupt bit within group
-+				ip -= (group << 5);
-+				intr_bit = 1 << ip;
-+		
-+				// first enable the IP mapped to this IRQ
-+				enable_local_irq(group_to_ip(group));
-+		
-+				addr = intr_group_muscat[group].base_addr;
-+				// unmask intr within group
-+				WRITE_MASK_MUSCAT(addr, READ_MASK_MUSCAT(addr) & ~intr_bit);
-+				break;
-+
-+			case MACH_ARUBA_AP65:
-+			case MACH_ARUBA_AP60:
-+			default:
-+				group = 0;
-+	
-+				// calc interrupt bit within group
-+				intr_bit = 1 << ip;
-+	
-+				// first enable the IP mapped to this IRQ
-+				enable_local_irq(group_to_ip(group));
-+	
-+				addr = intr_group_merlot[group].base_addr;
-+				// unmask intr within group
-+				WRITE_MASK_MERLOT(addr, READ_MASK_MERLOT(addr) | intr_bit);
-+				break;
-+		}
-+	}
-+}
-+
-+static struct hw_interrupt_type aruba_irq_type = {
-+	.typename = "ARUBA",
-+	.startup = startup_irq,
-+	.shutdown = shutdown_irq,
-+	.enable = aruba_enable_irq,
-+	.disable = aruba_disable_irq,
-+	.ack = mask_and_ack_irq,
-+	.end = end_irq,
-+};
-+
-+void __init arch_init_irq(void)
-+{
-+	int i;
-+	printk("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS);
-+	memset(irq_desc, 0, sizeof(irq_desc));
-+	set_except_vector(0, idtIRQ);
-+
-+	set_c0_status(0xFF00);
-+
-+	for (i = 0; i < RC32434_NR_IRQS; i++) {
-+		irq_desc[i].status = IRQ_DISABLED;
-+		irq_desc[i].action = NULL;
-+		irq_desc[i].depth = 1;
-+		irq_desc[i].handler = &aruba_irq_type;
-+		spin_lock_init(&irq_desc[i].lock);
-+	}
-+}
-+
-+/* Main Interrupt dispatcher */
-+void aruba_irqdispatch(unsigned long cp0_cause, struct pt_regs *regs)
-+{
-+	unsigned int pend, group, ip;
-+	volatile unsigned int *addr;
-+
-+	if(cp0_cause == 0) {
-+		printk("INTERRUPT(S) FIRED WHILE MASKED\n");
-+#ifdef ARUBA_DEBUG
-+		// debuging use -- figure out which interrupt(s) fired
-+		cp0_cause = read_c0_cause() & CAUSEF_IP;
-+		while (cp0_cause) {
-+			unsigned long intr_bit;
-+			unsigned int irq_nr;
-+			intr_bit = (31 - rc32434_clz(cp0_cause));
-+			irq_nr = intr_bit - GROUP0_IRQ_BASE;
-+			printk(" ---> MASKED IRQ %d\n",irq_nr);
-+			cp0_cause &= ~(1 << intr_bit);
-+		}
-+#endif
-+		return;
-+	}
-+
-+	switch (mips_machtype) {
-+		case MACH_ARUBA_AP70:
-+			if ((ip = (cp0_cause & 0x7c00))) {
-+				group = 21 - rc32434_clz(ip);
-+		
-+				addr = intr_group_muscat[group].base_addr;
-+		
-+				pend = READ_PEND_MUSCAT(addr);
-+				pend &= ~READ_MASK_MUSCAT(addr);	// only unmasked interrupts
-+				pend = 39 - rc32434_clz(pend);
-+				do_IRQ((group << 5) + pend, regs);
-+			}
-+			break;
-+		case MACH_ARUBA_AP65:
-+		case MACH_ARUBA_AP60:
-+		default:
-+			if (cp0_cause & 0x4000) { // 1 << (8 +6) == irq 6
-+				// Misc Interrupt
-+				group = 0;
-+				addr = intr_group_merlot[group].base_addr;
-+				pend = READ_PEND_MERLOT(addr);
-+				pend &= READ_MASK_MERLOT(addr);	// only unmasked interrupts
-+				/* handle one misc interrupt at a time */
-+				while (pend)
-+				{
-+					unsigned long intr_bit;
-+					unsigned int irq_nr;
-+
-+					intr_bit = (31 - rc32434_clz(pend));
-+					irq_nr = intr_bit + GROUP0_IRQ_BASE;
-+
-+					do_IRQ(irq_nr, regs);
-+					pend &= ~(1 << intr_bit);
-+				}
-+			} else if (cp0_cause & 0x3c00) { // irq 2-5
-+				while (cp0_cause)
-+				{
-+					unsigned long intr_bit;
-+					unsigned int irq_nr;
-+
-+					intr_bit = (31 - rc32434_clz(cp0_cause));
-+					irq_nr = intr_bit - GROUP0_IRQ_BASE;
-+
-+					do_IRQ(irq_nr, regs);
-+					cp0_cause &= ~(1 << intr_bit);
-+				}
-+			}
-+			break;
-+	}
-+}
diff --git a/openwrt/target/linux/aruba-2.6/patches/003-pci.patch b/openwrt/target/linux/aruba-2.6/patches/003-pci.patch
deleted file mode 100644
index 0cad12a087..0000000000
--- a/openwrt/target/linux/aruba-2.6/patches/003-pci.patch
+++ /dev/null
@@ -1,618 +0,0 @@
-diff -Nur linux-2.6.15/arch/mips/pci/fixup-aruba.c linux-2.6.15-openwrt/arch/mips/pci/fixup-aruba.c
---- linux-2.6.15/arch/mips/pci/fixup-aruba.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-openwrt/arch/mips/pci/fixup-aruba.c	2006-01-10 00:34:41.000000000 +0100
-@@ -0,0 +1,115 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     PCI fixups for IDT EB434 board
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <asm/idt-boards/rc32434/rc32434.h>
-+#include <asm/idt-boards/rc32434/rc32434_pci.h> 
-+
-+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	
-+	if (dev->bus->number != 0) {
-+		return 0;
-+	}
-+	
-+	slot = PCI_SLOT(dev->devfn);
-+	dev->irq = 0;
-+	
-+	if (slot > 0 && slot <= 15) {
-+#if 1
-+		if(slot == 10) {
-+			if(pin == 1) dev->irq = GROUP4_IRQ_BASE + 9; // intA
-+		} else if(slot == 11) {
-+			if(pin == 1) dev->irq = GROUP4_IRQ_BASE + 10; // intA
-+			if(pin == 2) dev->irq = GROUP4_IRQ_BASE + 10; // intA
-+			if(pin == 3) dev->irq = GROUP4_IRQ_BASE + 10; // intA
-+		} else if(slot == 12) {
-+			if(pin == 1) dev->irq = GROUP4_IRQ_BASE + 11; // intA
-+			if(pin == 2) dev->irq = GROUP4_IRQ_BASE + 12; // intB
-+		} else if (slot == 13) {
-+			if(pin == 1) dev->irq = GROUP4_IRQ_BASE + 12; // intA
-+			if(pin == 2) dev->irq = GROUP4_IRQ_BASE + 11; // intB
-+		} else {
-+			dev->irq = GROUP4_IRQ_BASE + 11;
-+		}
-+#else
-+                                switch (pin) {
-+                                case 1: /* INTA*/
-+                                        dev->irq = GROUP4_IRQ_BASE + 11;
-+                                        break;
-+                                case 2: /* INTB */
-+                                        dev->irq = GROUP4_IRQ_BASE + 11;
-+                                        break;
-+                                case 3: /* INTC */
-+                                        dev->irq = GROUP4_IRQ_BASE + 11;
-+                                        break;
-+                                case 4: /* INTD */
-+                                        dev->irq = GROUP4_IRQ_BASE + 11;
-+                                        break;
-+                                default:
-+                                        dev->irq = 0xff;
-+                                        break;
-+                                }
-+#endif
-+#ifdef DEBUG
-+		printk("irq fixup: slot %d, pin %d, irq %d\n",
-+		       slot, pin, dev->irq);
-+#endif
-+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE,dev->irq);
-+	}
-+	return (dev->irq);
-+}
-+
-+struct pci_fixup pcibios_fixups[] = {
-+	{0}
-+};
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-diff -Nur linux-2.6.15/arch/mips/pci/Makefile linux-2.6.15-openwrt/arch/mips/pci/Makefile
---- linux-2.6.15/arch/mips/pci/Makefile	2006-01-03 04:21:10.000000000 +0100
-+++ linux-2.6.15-openwrt/arch/mips/pci/Makefile	2006-01-10 00:32:32.000000000 +0100
-@@ -56,3 +56,4 @@
- obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-tx4938.o ops-tx4938.o
- obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
-+obj-$(CONFIG_MACH_ARUBA)        += fixup-aruba.o ops-aruba.o pci-aruba.o
-diff -Nur linux-2.6.15/arch/mips/pci/ops-aruba.c linux-2.6.15-openwrt/arch/mips/pci/ops-aruba.c
---- linux-2.6.15/arch/mips/pci/ops-aruba.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-openwrt/arch/mips/pci/ops-aruba.c	2006-01-10 00:32:32.000000000 +0100
-@@ -0,0 +1,204 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     pci_ops for IDT EB434 board
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+
-+#include <asm/cpu.h>
-+#include <asm/io.h>
-+
-+#include <asm/idt-boards/rc32434/rc32434.h>
-+#include <asm/idt-boards/rc32434/rc32434_pci.h>
-+
-+#define PCI_ACCESS_READ  0
-+#define PCI_ACCESS_WRITE 1
-+
-+
-+#define PCI_CFG_SET(slot,func,off) \
-+	(rc32434_pci->pcicfga = (0x80000000 | ((slot)<<11) | \
-+			    ((func)<<8) | (off)))
-+
-+static int config_access(unsigned char access_type, struct pci_bus *bus,
-+                         unsigned int devfn, unsigned char where,
-+                         u32 * data)
-+{ 
-+	/*
-+	 * config cycles are on 4 byte boundary only
-+	 */
-+	unsigned int slot = PCI_SLOT(devfn);
-+	u8 func = PCI_FUNC(devfn);
-+	
-+	if (slot < 2 || slot > 15) {
-+		*data = 0xFFFFFFFF;
-+		return -1;
-+	}
-+	/* Setup address */
-+	PCI_CFG_SET(slot, func, where);
-+	rc32434_sync();
-+	
-+	if (access_type == PCI_ACCESS_WRITE) {
-+		rc32434_sync();	
-+		rc32434_pci->pcicfgd = *data;
-+	} else {
-+		rc32434_sync();	
-+		*data = rc32434_pci->pcicfgd;
-+	}
-+	
-+	rc32434_sync();
-+	
-+	return 0;
-+}
-+
-+
-+/*
-+ * We can't address 8 and 16 bit words directly.  Instead we have to
-+ * read/write a 32bit word and mask/modify the data we actually want.
-+ */
-+static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
-+                            int where, u8 * val)
-+{
-+	u32 data;
-+	int ret;
-+	
-+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
-+	*val = (data >> ((where & 3) << 3)) & 0xff;
-+	return ret;
-+}
-+
-+static int read_config_word(struct pci_bus *bus, unsigned int devfn,
-+                            int where, u16 * val)
-+{
-+	u32 data;
-+	int ret;
-+	
-+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
-+	*val = (data >> ((where & 3) << 3)) & 0xffff;
-+	return ret;
-+}
-+
-+static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
-+                             int where, u32 * val)
-+{
-+	int ret;
-+	
-+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val);
-+	return ret;
-+}
-+
-+static int
-+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
-+                  u8 val)
-+{
-+	u32 data = 0;
-+	
-+	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
-+		return -1;
-+	
-+	data = (data & ~(0xff << ((where & 3) << 3))) |
-+		(val << ((where & 3) << 3));
-+	
-+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
-+		return -1;
-+	
-+	return PCIBIOS_SUCCESSFUL;
-+}
-+
-+
-+static int
-+write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
-+                  u16 val)
-+{
-+	u32 data = 0;
-+	
-+	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
-+		return -1;
-+	
-+	data = (data & ~(0xffff << ((where & 3) << 3))) |
-+		(val << ((where & 3) << 3));
-+	
-+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
-+		return -1;
-+	
-+	
-+	return PCIBIOS_SUCCESSFUL;
-+}
-+
-+
-+static int 
-+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
-+                   u32 val)
-+{
-+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
-+		return -1;
-+	
-+	return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int pci_config_read(struct pci_bus *bus, unsigned int devfn,
-+			   int where, int size, u32 * val)
-+{
-+	switch (size) {
-+	case 1: 
-+		return read_config_byte(bus, devfn, where, (u8 *) val);
-+	case 2: 
-+		return read_config_word(bus, devfn, where, (u16 *) val);
-+	default:
-+		return read_config_dword(bus, devfn, where, val);
-+	}
-+}
-+
-+static int pci_config_write(struct pci_bus *bus, unsigned int devfn,
-+			    int where, int size, u32 val)
-+{
-+	switch (size) {
-+	case 1: 
-+		return write_config_byte(bus, devfn, where, (u8) val);
-+	case 2: 
-+		return write_config_word(bus, devfn, where, (u16) val);
-+	default:
-+		return write_config_dword(bus, devfn, where, val);
-+	}
-+}
-+
-+struct pci_ops rc32434_pci_ops = {
-+	.read =  pci_config_read,
-+	.write = pci_config_write,
-+};
-diff -Nur linux-2.6.15/arch/mips/pci/pci-aruba.c linux-2.6.15-openwrt/arch/mips/pci/pci-aruba.c
---- linux-2.6.15/arch/mips/pci/pci-aruba.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-openwrt/arch/mips/pci/pci-aruba.c	2006-01-10 00:32:32.000000000 +0100
-@@ -0,0 +1,235 @@
-+/**************************************************************************
-+ *
-+ *  BRIEF MODULE DESCRIPTION
-+ *     PCI initialization for IDT EB434 board
-+ *
-+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
-+ *         
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2004 rkt, neb
-+ *
-+ * Initial Release
-+ *
-+ * 
-+ *
-+ **************************************************************************
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <asm/idt-boards/rc32434/rc32434.h>
-+#include <asm/idt-boards/rc32434/rc32434_pci.h> 
-+
-+#define PCI_ACCESS_READ  0
-+#define PCI_ACCESS_WRITE 1
-+
-+#undef DEBUG
-+#ifdef DEBUG
-+#define DBG(x...) printk(x)
-+#else
-+#define DBG(x...)
-+#endif
-+/* define an unsigned array for the PCI registers */
-+unsigned int korinaCnfgRegs[25] = {
-+	KORINA_CNFG1,	 KORINA_CNFG2,  KORINA_CNFG3,  KORINA_CNFG4,
-+	KORINA_CNFG5,	 KORINA_CNFG6,  KORINA_CNFG7,  KORINA_CNFG8,
-+	KORINA_CNFG9,	 KORINA_CNFG10, KORINA_CNFG11, KORINA_CNFG12,
-+	KORINA_CNFG13, KORINA_CNFG14, KORINA_CNFG15, KORINA_CNFG16,
-+	KORINA_CNFG17, KORINA_CNFG18, KORINA_CNFG19, KORINA_CNFG20,
-+	KORINA_CNFG21, KORINA_CNFG22, KORINA_CNFG23, KORINA_CNFG24
-+};
-+
-+static struct resource rc32434_res_pci_mem2;
-+
-+static struct resource rc32434_res_pci_mem1 = {
-+	.name = "PCI MEM1",
-+	.start = 0x50000000,
-+	.end = 0x5FFFFFFF,
-+	.flags = IORESOURCE_MEM,
-+	.child = &rc32434_res_pci_mem2,
-+};
-+static struct resource rc32434_res_pci_mem2 = {
-+	.name = "PCI MEM2",
-+	.start = 0x60000000,
-+	.end = 0x6FFFFFFF,
-+	.flags = IORESOURCE_MEM,
-+	.parent = &rc32434_res_pci_mem1,
-+};
-+static struct resource rc32434_res_pci_io1 = {
-+	.name = "PCI I/O1",
-+	.start = 0x18800000,
-+	.end = 0x188FFFFF,
-+	.flags = IORESOURCE_IO,
-+};
-+
-+extern struct pci_ops rc32434_pci_ops;
-+
-+struct pci_controller rc32434_controller = {
-+	.pci_ops = &rc32434_pci_ops,
-+	.mem_resource = &rc32434_res_pci_mem1,
-+	.io_resource = &rc32434_res_pci_io1,
-+	.mem_offset     = 0x00000000UL,
-+	.io_offset      = 0x00000000UL,
-+};
-+
-+extern unsigned int arch_has_pci;
-+
-+static int __init rc32434_pcibridge_init(void)
-+{
-+	
-+	unsigned int pciConfigAddr = 0;/*used for writing pci config values */
-+	int	     loopCount=0    ;/*used for the loop */
-+	
-+	unsigned int pcicValue, pcicData=0;
-+	unsigned int dummyRead, pciCntlVal = 0;
-+
-+	if (!arch_has_pci) return 0;
-+
-+	printk("PCI: Initializing PCI\n");
-+	
-+	/* Disable the IP bus error for PCI scaning */
-+	pciCntlVal=rc32434_pci->pcic;
-+	pciCntlVal &= 0xFFFFFF7;
-+	rc32434_pci->pcic = pciCntlVal;
-+	
-+	ioport_resource.start = rc32434_res_pci_io1.start;
-+	ioport_resource.end = rc32434_res_pci_io1.end;
-+/*
-+	iomem_resource.start = rc32434_res_pci_mem1.start;
-+	iomem_resource.end = rc32434_res_pci_mem1.end;
-+*/
-+	
-+	pcicValue = rc32434_pci->pcic;
-+	pcicValue = (pcicValue >> PCIM_SHFT) & PCIM_BIT_LEN;
-+	if (!((pcicValue == PCIM_H_EA) ||
-+	      (pcicValue == PCIM_H_IA_FIX) ||
-+	      (pcicValue == PCIM_H_IA_RR))) {
-+		/* Not in Host Mode, return ERROR */
-+		return -1;
-+	}
-+	
-+	/* Enables the Idle Grant mode, Arbiter Parking */
-+	pcicData |=(PCIC_igm_m|PCIC_eap_m|PCIC_en_m);
-+	rc32434_pci->pcic = pcicData; /* Enable the PCI bus Interface */
-+	/* Zero out the PCI status & PCI Status Mask */
-+	for(;;) {
-+		pcicData = rc32434_pci->pcis;
-+		if (!(pcicData & PCIS_rip_m))
-+			break;
-+	}
-+	
-+	rc32434_pci->pcis = 0;
-+	rc32434_pci->pcism = 0xFFFFFFFF;
-+	/* Zero out the PCI decoupled registers */
-+	rc32434_pci->pcidac=0; /* disable PCI decoupled accesses at initialization */
-+	rc32434_pci->pcidas=0; /* clear the status */
-+	rc32434_pci->pcidasm=0x0000007F; /* Mask all the interrupts */
-+	/* Mask PCI Messaging Interrupts */
-+	rc32434_pci_msg->pciiic = 0;
-+	rc32434_pci_msg->pciiim = 0xFFFFFFFF;
-+	rc32434_pci_msg->pciioic = 0;
-+	rc32434_pci_msg->pciioim = 0;
-+	
-+	/* Setup PCILB0 as Memory Window */
-+	rc32434_pci->pcilba[0].a = (unsigned int) (PCI_ADDR_START);
-+	
-+	/* setup the PCI map address as same as the local address */
-+	
-+	rc32434_pci->pcilba[0].m = (unsigned int) (PCI_ADDR_START);
-+	
-+	/* Setup PCILBA1 as MEM */
-+#ifdef __MIPSEB__
-+	rc32434_pci->pcilba[0].c = ( ((SIZE_16MB & 0x1f) << PCILBAC_size_b) | PCILBAC_sb_m);
-+#else
-+	rc32434_pci->pcilba[0].c = ( ((SIZE_16MB & 0x1f) << PCILBAC_size_b));
-+#endif
-+	dummyRead = rc32434_pci->pcilba[0].c; /* flush the CPU write Buffers */
-+	
-+	rc32434_pci->pcilba[1].a = 0x60000000;
-+	
-+	rc32434_pci->pcilba[1].m = 0x60000000;
-+	/* setup PCILBA2 as IO Window*/
-+#ifdef __MIPSEB__
-+	rc32434_pci->pcilba[1].c = ( ((SIZE_256MB & 0x1f) << PCILBAC_size_b) |  PCILBAC_sb_m);
-+#else
-+	rc32434_pci->pcilba[1].c = ((SIZE_256MB & 0x1f) << PCILBAC_size_b);
-+#endif
-+	dummyRead = rc32434_pci->pcilba[1].c; /* flush the CPU write Buffers */
-+	rc32434_pci->pcilba[2].a = 0x18C00000;
-+	
-+	rc32434_pci->pcilba[2].m = 0x18FFFFFF;
-+	/* setup PCILBA2 as IO Window*/
-+#ifdef __MIPSEB__
-+	rc32434_pci->pcilba[2].c = ( ((SIZE_4MB & 0x1f) << PCILBAC_size_b)  |  PCILBAC_sb_m);
-+#else
-+	rc32434_pci->pcilba[2].c = ((SIZE_4MB & 0x1f) << PCILBAC_size_b);
-+#endif  
-+	
-+	dummyRead = rc32434_pci->pcilba[2].c; /* flush the CPU write Buffers */
-+	
-+	
-+	rc32434_pci->pcilba[3].a = 0x18800000;
-+	
-+	rc32434_pci->pcilba[3].m = 0x18800000;
-+	/* Setup PCILBA3 as IO Window */
-+	
-+#ifdef __MIPSEB__
-+	rc32434_pci->pcilba[3].c = ( (((SIZE_1MB & 0x1ff) << PCILBAC_size_b) | PCILBAC_msi_m)   |  PCILBAC_sb_m);
-+#else
-+	rc32434_pci->pcilba[3].c = (((SIZE_1MB & 0x1ff) << PCILBAC_size_b) | PCILBAC_msi_m);
-+#endif
-+	dummyRead = rc32434_pci->pcilba[2].c; /* flush the CPU write Buffers */
-+	
-+	pciConfigAddr = (unsigned int)(0x80000004);
-+	for(loopCount = 0; loopCount < 24; loopCount++){
-+		rc32434_pci->pcicfga = pciConfigAddr;
-+		dummyRead = rc32434_pci->pcicfga;
-+		rc32434_pci->pcicfgd = korinaCnfgRegs[loopCount];
-+		dummyRead=rc32434_pci->pcicfgd;
-+		pciConfigAddr += 4;
-+	}
-+	rc32434_pci->pcitc=(unsigned int)((PCITC_RTIMER_VAL&0xff) << PCITC_rtimer_b) |
-+		((PCITC_DTIMER_VAL&0xff)<<PCITC_dtimer_b);
-+	
-+	pciCntlVal = rc32434_pci->pcic;
-+	pciCntlVal &= ~(PCIC_tnr_m);
-+	rc32434_pci->pcic = pciCntlVal;
-+	pciCntlVal = rc32434_pci->pcic;
-+	
-+	register_pci_controller(&rc32434_controller);
-+	
-+	rc32434_sync();  
-+	return 0;
-+}
-+
-+arch_initcall(rc32434_pcibridge_init);
-+
-+/* Do platform specific device initialization at pci_enable_device() time */
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+        return 0;
-+}
-diff -Nur linux-2.6.15/drivers/pci/access.c linux-2.6.15-openwrt/drivers/pci/access.c
---- linux-2.6.15/drivers/pci/access.c	2006-01-03 04:21:10.000000000 +0100
-+++ linux-2.6.15-openwrt/drivers/pci/access.c	2006-01-10 00:43:10.000000000 +0100
-@@ -21,6 +21,7 @@
- #define PCI_word_BAD (pos & 1)
- #define PCI_dword_BAD (pos & 3)
- 
-+#ifdef __MIPSEB__
- #define PCI_OP_READ(size,type,len) \
- int pci_bus_read_config_##size \
- 	(struct pci_bus *bus, unsigned int devfn, int pos, type *value)	\
-@@ -31,11 +32,32 @@
- 	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
- 	spin_lock_irqsave(&pci_lock, flags);				\
- 	res = bus->ops->read(bus, devfn, pos, len, &data);		\
-+	if (len == 1)							\
-+	 *value = (type)((data >> 24) & 0xff);				\
-+	 else if (len == 2)						\
-+	 *value = (type)((data >> 16) & 0xffff);			\
-+	else								\
- 	*value = (type)data;						\
- 	spin_unlock_irqrestore(&pci_lock, flags);			\
- 	return res;							\
- }
-+#else
- 
-+#define PCI_OP_READ(size,type,len) \
-+int pci_bus_read_config_##size \
-+	(struct pci_bus *bus, unsigned int devfn, int pos, type *value) \
-+{									\
-+	int res;							\
-+	unsigned long flags;						\
-+	u32 data = 0;							\
-+	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
-+	spin_lock_irqsave(&pci_lock, flags);				\
-+	res = bus->ops->read(bus, devfn, pos, len, &data);		\
-+	*value = (type)data;						\
-+	spin_unlock_irqrestore(&pci_lock, flags);			\
-+	return res;							\
-+}
-+#endif
- #define PCI_OP_WRITE(size,type,len) \
- int pci_bus_write_config_##size \
- 	(struct pci_bus *bus, unsigned int devfn, int pos, type value)	\
diff --git a/openwrt/target/linux/aruba-2.6/patches/004-wdt.patch b/openwrt/target/linux/aruba-2.6/patches/004-wdt.patch
deleted file mode 100644
index 15fbffa043..0000000000
--- a/openwrt/target/linux/aruba-2.6/patches/004-wdt.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-diff -Nur linux-2.6.15.1/drivers/char/watchdog/wdt_merlot.c linux-2.6.15.1-openwrt/drivers/char/watchdog/wdt_merlot.c
---- linux-2.6.15.1/drivers/char/watchdog/wdt_merlot.c	2006-01-26 21:14:02.204626250 -0800
-+++ linux-2.6.15.1-openwrt/drivers/char/watchdog/wdt_merlot.c	2006-02-02 20:31:43.000000000 -0800
-@@ -0,0 +1,110 @@
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/fs.h>
-+
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+#include <asm/system.h>
-+#include <asm/bootinfo.h>
-+
-+extern unsigned long mips_machtype;
-+
-+static unsigned long wdt_is_open;
-+static struct timer_list wdt_timer;
-+
-+static void wdt_merlot_refresh(void)
-+{
-+    volatile __u32 *wdt;
-+    switch (mips_machtype) {
-+    case MACH_ARUBA_AP70:
-+	wdt = (__u32 *) 0xb8030034;
-+	*wdt = 0x10000000;
-+	break;
-+    default:
-+	wdt = (__u32 *) 0xbc00300c;
-+	*wdt = 0x40000000;
-+	break;
-+    }
-+}
-+
-+static void wdt_merlot_timer_fn(unsigned long data)
-+{
-+    wdt_merlot_refresh();
-+    if (!test_bit(1, &wdt_is_open))
-+	mod_timer(&wdt_timer, jiffies + HZ);
-+}
-+
-+static int wdt_merlot_setup_timer(void)
-+{
-+
-+    init_timer(&wdt_timer);
-+    wdt_timer.function = wdt_merlot_timer_fn;
-+    wdt_timer.data = 0;
-+    wdt_timer.expires = jiffies + HZ;
-+    add_timer(&wdt_timer);
-+    return 0;
-+}
-+
-+static int wdt_open(struct inode *inode, struct file *file)
-+{
-+    if (test_and_set_bit(0, &wdt_is_open))
-+	return -EBUSY;
-+    set_bit(1, &wdt_is_open);
-+    return nonseekable_open(inode, file);
-+}
-+
-+static ssize_t wdt_write(struct file *file, const char __user * buf, size_t count, loff_t * ppos)
-+{
-+    if (count) 	/* something was written */
-+	wdt_merlot_refresh();
-+    return count;
-+}
-+
-+static int wdt_release(struct inode *inode, struct file *file)
-+{
-+    clear_bit(0, &wdt_is_open);
-+    return 0;
-+}
-+
-+static struct file_operations wdt_fops = {
-+    .owner = THIS_MODULE,
-+    .llseek = no_llseek,
-+    .write = wdt_write,
-+    .open = wdt_open,
-+    .release = wdt_release,
-+};
-+
-+static struct miscdevice wdt_miscdev = {
-+    .minor = WATCHDOG_MINOR,
-+    .name = "watchdog",
-+    .fops = &wdt_fops,
-+};
-+
-+static void __exit wdt_exit(void)
-+{
-+    misc_deregister(&wdt_miscdev);
-+}
-+
-+static int __init wdt_init(void)
-+{
-+    int ret;
-+    ret = misc_register(&wdt_miscdev);
-+    if (ret) {
-+	printk(KERN_ERR
-+	       "wdt: cannot register miscdev on minor=%d (err=%d)\n",
-+	       WATCHDOG_MINOR, ret);
-+	misc_deregister(&wdt_miscdev);
-+	goto out;
-+    }
-+    printk("wdt: registered with refresh\n");
-+    wdt_merlot_refresh();
-+    wdt_merlot_setup_timer();
-+  out:
-+    return ret;
-+}
-+
-+module_init(wdt_init);
-+module_exit(wdt_exit);
-diff -Nur linux-2.6.15.3/drivers/char/watchdog/Makefile linux-2.6.15.3-openwrt/drivers/char/watchdog/Makefile
---- linux-2.6.15.3/drivers/char/watchdog/Makefile	2006-02-22 10:04:18.596278000 -0800
-+++ linux-2.6.15.3-openwrt/drivers/char/watchdog/Makefile	2006-02-22 10:06:21.400960000 -0800
-@@ -71,5 +71,8 @@
- 
- # SPARC64 Architecture
- 
-+# Aruba Architecture
-+obj-$(CONFIG_MACH_ARUBA) += wdt_merlot.o
-+
- # Architecture Independant
- obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
diff --git a/openwrt/target/linux/aruba-2.6/patches/007-boot.patch b/openwrt/target/linux/aruba-2.6/patches/007-boot.patch
deleted file mode 100644
index 611c70d460..0000000000
--- a/openwrt/target/linux/aruba-2.6/patches/007-boot.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-diff -Nur linux-cvs/arch/mips/kernel/head.S linux-aruba/arch/mips/kernel/head.S
---- linux-cvs/arch/mips/kernel/head.S	2004-12-23 00:21:39.000000000 -0800
-+++ linux-aruba/arch/mips/kernel/head.S	2005-10-20 09:16:08.000000000 -0700
-@@ -122,6 +122,10 @@
- #endif
- 	.endm
- 
-+
-+	j kernel_entry
-+	nop
-+
- 	/*
- 	 * Reserved space for exception handlers.
- 	 * Necessary for machines which link their kernels at KSEG0.
-
diff --git a/openwrt/target/linux/aruba-2.6/patches/010-ar2313_enet.patch b/openwrt/target/linux/aruba-2.6/patches/010-ar2313_enet.patch
deleted file mode 100644
index 01fe26fac5..0000000000
--- a/openwrt/target/linux/aruba-2.6/patches/010-ar2313_enet.patch
+++ /dev/null
@@ -1,2160 +0,0 @@
-diff -urN linux.old/drivers/net/Kconfig linux.net/drivers/net/Kconfig
---- linux.old/drivers/net/Kconfig	2006-01-21 20:15:08.279272000 +0100
-+++ linux.net/drivers/net/Kconfig	2006-01-30 01:18:34.910315000 +0100
-@@ -176,6 +176,13 @@
- 
- source "drivers/net/arm/Kconfig"
- 
-+
-+config AR2313
-+		tristate "AR2313 Ethernet support"
-+		depends on NET_ETHERNET && MACH_ARUBA
-+		help
-+		Support for the AR2313 Ethernet part on Aruba AP60/61
-+
- config IDT_RC32434_ETH
-         tristate "IDT RC32434 Local Ethernet support"
-         depends on NET_ETHERNET
-diff -urN linux.old/drivers/net/Makefile linux.net/drivers/net/Makefile
---- linux.old/drivers/net/Makefile	2006-01-21 20:15:08.383226000 +0100
-+++ linux.net/drivers/net/Makefile	2006-01-30 01:18:34.914315250 +0100
-@@ -35,6 +35,7 @@
- 
- obj-$(CONFIG_OAKNET) += oaknet.o 8390.o
- 
-+obj-$(CONFIG_AR2313) += ar2313.o
- obj-$(CONFIG_IDT_RC32434_ETH) += rc32434_eth.o
- obj-$(CONFIG_DGRS) += dgrs.o
- obj-$(CONFIG_VORTEX) += 3c59x.o
-diff -urN linux.old/drivers/net/ar2313/ar2313.h linux.net/drivers/net/ar2313/ar2313.h
---- linux.old/drivers/net/ar2313/ar2313.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.net/drivers/net/ar2313/ar2313.h	2006-01-25 00:35:55.000000000 +0100
-@@ -0,0 +1,190 @@
-+#ifndef _AR2313_H_
-+#define _AR2313_H_
-+
-+#include <linux/config.h>
-+#include <asm/bootinfo.h>
-+#include "platform.h"
-+
-+extern unsigned long mips_machtype;
-+
-+#undef ETHERNET_BASE
-+#define ETHERNET_BASE ar_eth_base
-+#define ETHERNET_SIZE 0x00100000
-+#define ETHERNET_MACS 2
-+
-+#undef DMA_BASE
-+#define DMA_BASE      ar_dma_base
-+#define DMA_SIZE      0x00100000
-+
-+
-+/*
-+ * probe link timer - 5 secs
-+ */
-+#define LINK_TIMER    (5*HZ) 
-+
-+/*
-+ * Interrupt register base address
-+ */
-+#define INTERRUPT_BASE    PHYS_TO_K1(ar_int_base)
-+
-+/*
-+ * Reset Register
-+ */
-+#define AR531X_RESET    (AR531X_RESETTMR + 0x0020)
-+#define RESET_SYSTEM         0x00000001      /* cold reset full system */
-+#define RESET_PROC           0x00000002      /* cold reset MIPS core */
-+#define RESET_WLAN0          0x00000004      /* cold reset WLAN MAC and BB */
-+#define RESET_EPHY0          0x00000008      /* cold reset ENET0 phy */
-+#define RESET_EPHY1          0x00000010      /* cold reset ENET1 phy */
-+#define RESET_ENET0          0x00000020      /* cold reset ENET0 mac */
-+#define RESET_ENET1          0x00000040      /* cold reset ENET1 mac */
-+
-+#define IS_DMA_TX_INT(X)   (((X) & (DMA_STATUS_TI)) != 0)
-+#define IS_DMA_RX_INT(X)   (((X) & (DMA_STATUS_RI)) != 0)
-+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN))    == 0)
-+
-+#ifndef K1_TO_PHYS
-+// hack
-+#define K1_TO_PHYS(x)   (((unsigned int)(x)) & 0x1FFFFFFF)        /* kseg1 to physical */
-+#endif
-+
-+#ifndef PHYS_TO_K1
-+// hack
-+#define  PHYS_TO_K1(x)   (((unsigned int)(x)) | 0xA0000000)   /* physical to kseg1 */
-+#endif
-+
-+#define AR2313_TX_TIMEOUT (HZ/4)
-+
-+/*
-+ * Rings
-+ */
-+#define DSC_RING_ENTRIES_SIZE	(AR2313_DESCR_ENTRIES * sizeof(struct desc))
-+#define DSC_NEXT(idx)	        ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
-+
-+static inline int tx_space (u32 csm, u32 prd)
-+{
-+	return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1);
-+}
-+
-+#if MAX_SKB_FRAGS
-+#define TX_RESERVED	(MAX_SKB_FRAGS+1) /* +1 for message header */
-+#define tx_ring_full(csm, prd)	(tx_space(csm, prd) <= TX_RESERVED)
-+#else
-+#define tx_ring_full		0
-+#endif
-+
-+#define AR2313_MBGET		2
-+#define AR2313_MBSET    	3
-+#define AR2313_PCI_RECONFIG	4
-+#define AR2313_PCI_DUMP  	5
-+#define AR2313_TEST_PANIC	6
-+#define AR2313_TEST_NULLPTR	7
-+#define AR2313_READ_DATA	8
-+#define AR2313_WRITE_DATA	9
-+#define AR2313_GET_VERSION	10
-+#define AR2313_TEST_HANG	11
-+#define AR2313_SYNC		12
-+
-+
-+struct ar2313_cmd {
-+	u32	cmd;
-+        u32     address;      /* virtual address of image */
-+        u32     length;       /* size of image to download */
-+        u32     mailbox;      /* mailbox to get/set */
-+        u32     data[2];      /* contents of mailbox to read/write */
-+};
-+
-+
-+/*
-+ * Struct private for the Sibyte.
-+ *
-+ * Elements are grouped so variables used by the tx handling goes
-+ * together, and will go into the same cache lines etc. in order to
-+ * avoid cache line contention between the rx and tx handling on SMP.
-+ *
-+ * Frequently accessed variables are put at the beginning of the
-+ * struct to help the compiler generate better/shorter code.
-+ */
-+struct ar2313_private
-+{
-+        int			version;
-+        u32                     mb[2];
-+	
-+	volatile ETHERNET_STRUCT	*eth_regs;
-+	volatile DMA			*dma_regs;
-+        volatile u32		        *int_regs;
-+
-+	spinlock_t lock; 	/* Serialise access to device */
-+
-+        /*
-+	 * RX and TX descriptors, must be adjacent
-+	 */
-+        ar2313_descr_t	        *rx_ring;
-+        ar2313_descr_t	        *tx_ring;
-+
-+
-+        struct sk_buff		**rx_skb;
-+        struct sk_buff		**tx_skb;
-+
-+	/*
-+	 * RX elements
-+	 */
-+        u32			rx_skbprd;
-+	u32			cur_rx;
-+
-+	/*
-+	 * TX elements
-+	 */
-+	u32			tx_prd;
-+        u32		        tx_csm;
-+
-+        /*
-+	 * Misc elements
-+	 */
-+	int			board_idx;
-+	char			name[48];
-+	struct net_device_stats stats;
-+        struct {
-+	    u32 address;
-+	    u32 length;
-+	    char *mapping;
-+	} desc;
-+
-+
-+	struct timer_list link_timer;
-+	unsigned short phy;  /* merlot phy = 1,  samsung phy = 0x1f */
-+        unsigned short mac;
-+	unsigned short link; /* 0 - link down,  1 - link up */
-+        u16 phyData;
-+
-+	struct tasklet_struct rx_tasklet;
-+	int unloading;
-+};
-+
-+
-+/*
-+ * Prototypes
-+ */
-+static int  ar2313_init(struct net_device *dev);
-+#ifdef TX_TIMEOUT
-+static void ar2313_tx_timeout(struct net_device *dev);
-+#endif
-+#if 0
-+static void ar2313_multicast_list(struct net_device *dev);
-+#endif
-+static int ar2313_restart(struct net_device *dev);
-+#if DEBUG
-+static void  ar2313_dump_regs(struct net_device *dev);
-+#endif
-+static void ar2313_load_rx_ring(struct net_device *dev, int bufs);
-+static irqreturn_t ar2313_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-+static int  ar2313_open(struct net_device *dev);
-+static int  ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static int  ar2313_close(struct net_device *dev);
-+static int  ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
-+static void ar2313_init_cleanup(struct net_device *dev);
-+static int  ar2313_setup_timer(struct net_device *dev);
-+static void ar2313_link_timer_fn(unsigned long data);
-+static void ar2313_check_link(struct net_device *dev);
-+static struct net_device_stats *ar2313_get_stats(struct net_device *dev);
-+#endif /* _AR2313_H_ */
-diff -urN linux.old/drivers/net/ar2313/ar2313_msg.h linux.net/drivers/net/ar2313/ar2313_msg.h
---- linux.old/drivers/net/ar2313/ar2313_msg.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.net/drivers/net/ar2313/ar2313_msg.h	2006-01-24 22:57:25.000000000 +0100
-@@ -0,0 +1,17 @@
-+#ifndef _AR2313_MSG_H_
-+#define _AR2313_MSG_H_
-+
-+#define AR2313_MTU                     1692
-+#define AR2313_PRIOS                   1
-+#define AR2313_QUEUES                  (2*AR2313_PRIOS)
-+
-+#define AR2313_DESCR_ENTRIES           64
-+
-+typedef struct {
-+    volatile unsigned int	status;		// OWN, Device control and status.
-+    volatile unsigned int	devcs;		// pkt Control bits + Length
-+    volatile unsigned int	addr;		// Current Address.
-+    volatile unsigned int	descr;		// Next descriptor in chain.
-+} ar2313_descr_t;
-+
-+#endif /* _AR2313_MSG_H_ */
-diff -urN linux.old/drivers/net/ar2313/dma.h linux.net/drivers/net/ar2313/dma.h
---- linux.old/drivers/net/ar2313/dma.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.net/drivers/net/ar2313/dma.h	2006-01-24 22:58:45.000000000 +0100
-@@ -0,0 +1,135 @@
-+#ifndef __ARUBA_DMA_H__
-+#define __ARUBA_DMA_H__
-+
-+/*******************************************************************************
-+ *
-+ * Copyright 2002 Integrated Device Technology, Inc.
-+ *		All rights reserved.
-+ *
-+ * DMA register definition.
-+ *
-+ * File   : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $
-+ *
-+ * Author : ryan.holmQVist@idt.com
-+ * Date   : 20011005
-+ * Update :
-+ *	    $Log: dma.h,v $
-+ *	    Revision 1.3  2002/06/06 18:34:03  astichte
-+ *	    Added XXX_PhysicalAddress and XXX_VirtualAddress
-+ *	
-+ *	    Revision 1.2  2002/06/05 18:30:46  astichte
-+ *	    Removed IDTField
-+ *	
-+ *	    Revision 1.1  2002/05/29 17:33:21  sysarch
-+ *	    jba File moved from vcode/include/idt/acacia
-+ *	
-+ *
-+ ******************************************************************************/
-+
-+#define AR_BIT(x)            (1 << (x))
-+#define DMA_RX_ERR_CRC       AR_BIT(1)
-+#define DMA_RX_ERR_DRIB      AR_BIT(2)
-+#define DMA_RX_ERR_MII       AR_BIT(3)
-+#define DMA_RX_EV2           AR_BIT(5)
-+#define DMA_RX_ERR_COL       AR_BIT(6)
-+#define DMA_RX_LONG          AR_BIT(7)
-+#define DMA_RX_LS            AR_BIT(8)  /* last descriptor */
-+#define DMA_RX_FS            AR_BIT(9)  /* first descriptor */
-+#define DMA_RX_MF            AR_BIT(10) /* multicast frame */
-+#define DMA_RX_ERR_RUNT      AR_BIT(11) /* runt frame */
-+#define DMA_RX_ERR_LENGTH    AR_BIT(12) /* length error */
-+#define DMA_RX_ERR_DESC      AR_BIT(14) /* descriptor error */
-+#define DMA_RX_ERROR         AR_BIT(15) /* error summary */
-+#define DMA_RX_LEN_MASK      0x3fff0000
-+#define DMA_RX_LEN_SHIFT     16
-+#define DMA_RX_FILT          AR_BIT(30)
-+#define DMA_RX_OWN           AR_BIT(31) /* desc owned by DMA controller */
-+
-+#define DMA_RX1_BSIZE_MASK   0x000007ff
-+#define DMA_RX1_BSIZE_SHIFT  0
-+#define DMA_RX1_CHAINED      AR_BIT(24)
-+#define DMA_RX1_RER          AR_BIT(25)
-+
-+#define DMA_TX_ERR_UNDER     AR_BIT(1)  /* underflow error */
-+#define DMA_TX_ERR_DEFER     AR_BIT(2)  /* excessive deferral */
-+#define DMA_TX_COL_MASK      0x78
-+#define DMA_TX_COL_SHIFT     3
-+#define DMA_TX_ERR_HB        AR_BIT(7)  /* hearbeat failure */
-+#define DMA_TX_ERR_COL       AR_BIT(8)  /* excessive collisions */
-+#define DMA_TX_ERR_LATE      AR_BIT(9)  /* late collision */
-+#define DMA_TX_ERR_LINK      AR_BIT(10) /* no carrier */
-+#define DMA_TX_ERR_LOSS      AR_BIT(11) /* loss of carrier */
-+#define DMA_TX_ERR_JABBER    AR_BIT(14) /* transmit jabber timeout */
-+#define DMA_TX_ERROR         AR_BIT(15) /* frame aborted */
-+#define DMA_TX_OWN           AR_BIT(31) /* descr owned by DMA controller */
-+
-+#define DMA_TX1_BSIZE_MASK   0x000007ff
-+#define DMA_TX1_BSIZE_SHIFT  0
-+#define DMA_TX1_CHAINED      AR_BIT(24) /* chained descriptors */
-+#define DMA_TX1_TER          AR_BIT(25) /* transmit end of ring */
-+#define DMA_TX1_FS           AR_BIT(29) /* first segment */
-+#define DMA_TX1_LS           AR_BIT(30) /* last segment */
-+#define DMA_TX1_IC           AR_BIT(31) /* interrupt on completion */
-+
-+#define RCVPKT_LENGTH(X)     (X  >> 16)               /* Received pkt Length  */
-+
-+#define MAC_CONTROL_RE       AR_BIT(2)  /* receive enable */
-+#define MAC_CONTROL_TE       AR_BIT(3)  /* transmit enable */
-+#define MAC_CONTROL_DC       AR_BIT(5)  /* Deferral check*/
-+#define MAC_CONTROL_ASTP     AR_BIT(8)  /* Auto pad strip */
-+#define MAC_CONTROL_DRTY     AR_BIT(10) /* Disable retry */
-+#define MAC_CONTROL_DBF      AR_BIT(11) /* Disable bcast frames */
-+#define MAC_CONTROL_LCC      AR_BIT(12) /* late collision ctrl */
-+#define MAC_CONTROL_HP       AR_BIT(13) /* Hash Perfect filtering */
-+#define MAC_CONTROL_HASH     AR_BIT(14) /* Unicast hash filtering */
-+#define MAC_CONTROL_HO       AR_BIT(15) /* Hash only filtering */
-+#define MAC_CONTROL_PB       AR_BIT(16) /* Pass Bad frames */
-+#define MAC_CONTROL_IF       AR_BIT(17) /* Inverse filtering */
-+#define MAC_CONTROL_PR       AR_BIT(18) /* promiscuous mode (valid frames only) */
-+#define MAC_CONTROL_PM       AR_BIT(19) /* pass multicast */
-+#define MAC_CONTROL_F        AR_BIT(20) /* full-duplex */
-+#define MAC_CONTROL_DRO      AR_BIT(23) /* Disable Receive Own */
-+#define MAC_CONTROL_HBD      AR_BIT(28) /* heart-beat disabled (MUST BE SET) */
-+#define MAC_CONTROL_BLE      AR_BIT(30) /* big endian mode */
-+#define MAC_CONTROL_RA       AR_BIT(31) /* receive all (valid and invalid frames) */
-+
-+#define MII_ADDR_BUSY        AR_BIT(0)
-+#define MII_ADDR_WRITE       AR_BIT(1)
-+#define MII_ADDR_REG_SHIFT   6
-+#define MII_ADDR_PHY_SHIFT   11
-+#define MII_DATA_SHIFT       0
-+
-+#define FLOW_CONTROL_FCE     AR_BIT(1)
-+
-+#define DMA_BUS_MODE_SWR       AR_BIT(0)  /* software reset */
-+#define DMA_BUS_MODE_BLE       AR_BIT(7)  /* big endian mode */
-+#define DMA_BUS_MODE_PBL_SHIFT 8          /* programmable burst length 32 */
-+#define DMA_BUS_MODE_DBO       AR_BIT(20) /* big-endian descriptors */
-+
-+#define DMA_STATUS_TI        AR_BIT(0)  /* transmit interrupt */
-+#define DMA_STATUS_TPS       AR_BIT(1)  /* transmit process stopped */
-+#define DMA_STATUS_TU        AR_BIT(2)  /* transmit buffer unavailable */
-+#define DMA_STATUS_TJT       AR_BIT(3)  /* transmit buffer timeout */
-+#define DMA_STATUS_UNF       AR_BIT(5)  /* transmit underflow */
-+#define DMA_STATUS_RI        AR_BIT(6)  /* receive interrupt */
-+#define DMA_STATUS_RU        AR_BIT(7)  /* receive buffer unavailable */
-+#define DMA_STATUS_RPS       AR_BIT(8)  /* receive process stopped */
-+#define DMA_STATUS_ETI       AR_BIT(10) /* early transmit interrupt */
-+#define DMA_STATUS_FBE       AR_BIT(13) /* fatal bus interrupt */
-+#define DMA_STATUS_ERI       AR_BIT(14) /* early receive interrupt */
-+#define DMA_STATUS_AIS       AR_BIT(15) /* abnormal interrupt summary */
-+#define DMA_STATUS_NIS       AR_BIT(16) /* normal interrupt summary */
-+#define DMA_STATUS_RS_SHIFT  17         /* receive process state */
-+#define DMA_STATUS_TS_SHIFT  20         /* transmit process state */
-+#define DMA_STATUS_EB_SHIFT  23         /* error bits */
-+
-+#define DMA_CONTROL_SR       AR_BIT(1)  /* start receive */
-+#define DMA_CONTROL_ST       AR_BIT(13) /* start transmit */
-+#define DMA_CONTROL_SF       AR_BIT(21) /* store and forward */
-+
-+#endif	// __ARUBA_DMA_H__
-+
-+
-+
-+
-+
-diff -urN linux.old/drivers/net/ar2313/platform.h linux.net/drivers/net/ar2313/platform.h
---- linux.old/drivers/net/ar2313/platform.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.net/drivers/net/ar2313/platform.h	2006-01-25 00:10:25.000000000 +0100
-@@ -0,0 +1,128 @@
-+/********************************************************************************
-+   Title:   $Source: platform.h,v $
-+
-+   Author:  Dan Steinberg
-+            Copyright Integrated Device Technology 2001
-+
-+   Purpose: AR2313 Register/Bit Definitions
-+   
-+   Update:
-+            $Log: platform.h,v $
-+      
-+   Notes:   See Merlot architecture spec for complete details.  Note, all
-+            addresses are virtual addresses in kseg1 (Uncached, Unmapped).
-+ 
-+********************************************************************************/
-+
-+#ifndef PLATFORM_H
-+#define PLATFORM_H
-+
-+#define BIT(x) (1 << (x))
-+
-+#define RESET_BASE        0xBC003020
-+#define RESET_VALUE       0x00000001
-+
-+/********************************************************************
-+ * Device controller 
-+ ********************************************************************/
-+typedef struct {
-+  volatile unsigned int flash0;
-+} DEVICE;
-+
-+#define device (*((volatile DEVICE *) DEV_CTL_BASE))
-+
-+// DDRC register
-+#define DEV_WP        (1<<26)
-+
-+/********************************************************************
-+ * DDR controller 
-+ ********************************************************************/
-+typedef struct {
-+  volatile unsigned int ddrc0;
-+  volatile unsigned int ddrc1;
-+  volatile unsigned int ddrrefresh;
-+} DDR;
-+
-+#define ddr (*((volatile DDR *) DDR_BASE))
-+
-+// DDRC register
-+#define DDRC_CS(i)     ((i&0x3)<<0)
-+#define DDRC_WE        (1<<2)
-+
-+/********************************************************************
-+ * Ethernet interfaces
-+ ********************************************************************/
-+#define ETHERNET_BASE    0xB8200000
-+
-+//
-+// New Combo structure for Both Eth0 AND eth1
-+//
-+typedef struct {
-+  volatile unsigned int mac_control;    /* 0x00 */
-+  volatile unsigned int mac_addr[2];    /* 0x04 - 0x08*/
-+  volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
-+  volatile unsigned int mii_addr;       /* 0x14 */
-+  volatile unsigned int mii_data;       /* 0x18 */
-+  volatile unsigned int flow_control;   /* 0x1c */
-+  volatile unsigned int vlan_tag;       /* 0x20 */
-+  volatile unsigned int pad[7];         /* 0x24 - 0x3c */
-+  volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
-+  
-+} ETHERNET_STRUCT;
-+
-+/********************************************************************
-+ * Interrupt controller 
-+ ********************************************************************/
-+
-+typedef struct {
-+  volatile unsigned int wdog_control;		/* 0x08 */
-+  volatile unsigned int wdog_timer;		/* 0x0c */
-+  volatile unsigned int misc_status;		/* 0x10 */
-+  volatile unsigned int misc_mask;		/* 0x14 */
-+  volatile unsigned int global_status;		/* 0x18 */
-+  volatile unsigned int reserved;		/* 0x1c */
-+  volatile unsigned int reset_control;		/* 0x20 */
-+} INTERRUPT;
-+
-+#define interrupt (*((volatile INTERRUPT *) INTERRUPT_BASE))
-+
-+#define INTERRUPT_MISC_TIMER    BIT(0)
-+#define INTERRUPT_MISC_AHBPROC  BIT(1)
-+#define INTERRUPT_MISC_AHBDMA   BIT(2)
-+#define INTERRUPT_MISC_GPIO     BIT(3)
-+#define INTERRUPT_MISC_UART     BIT(4)
-+#define INTERRUPT_MISC_UARTDMA  BIT(5)
-+#define INTERRUPT_MISC_WATCHDOG BIT(6)
-+#define INTERRUPT_MISC_LOCAL    BIT(7)
-+
-+#define INTERRUPT_GLOBAL_ETH    BIT(2)
-+#define INTERRUPT_GLOBAL_WLAN   BIT(3)
-+#define INTERRUPT_GLOBAL_MISC   BIT(4)
-+#define INTERRUPT_GLOBAL_ITIMER BIT(5)
-+
-+/********************************************************************
-+ * DMA controller
-+ ********************************************************************/
-+#define DMA_BASE          0xB8201000
-+
-+typedef struct {
-+  volatile unsigned int bus_mode;        /* 0x00 (CSR0) */
-+  volatile unsigned int xmt_poll;        /* 0x04 (CSR1) */
-+  volatile unsigned int rcv_poll;        /* 0x08 (CSR2) */
-+  volatile unsigned int rcv_base;        /* 0x0c (CSR3) */
-+  volatile unsigned int xmt_base;        /* 0x10 (CSR4) */
-+  volatile unsigned int status;          /* 0x14 (CSR5) */
-+  volatile unsigned int control;         /* 0x18 (CSR6) */
-+  volatile unsigned int intr_ena;        /* 0x1c (CSR7) */
-+  volatile unsigned int rcv_missed;      /* 0x20 (CSR8) */
-+  volatile unsigned int reserved[11];    /* 0x24-0x4c (CSR9-19) */
-+  volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
-+  volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
-+} DMA;
-+
-+#define dma (*((volatile DMA *) DMA_BASE))
-+
-+// macro to convert from virtual to physical address  
-+#define phys_addr(x)      (x & 0x1fffffff) 
-+
-+#endif /* PLATFORM_H */
-diff -urN linux.old/drivers/net/ar2313.c linux.net/drivers/net/ar2313.c
---- linux.old/drivers/net/ar2313.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.net/drivers/net/ar2313.c	2006-01-30 01:21:56.822933750 +0100
-@@ -0,0 +1,1642 @@
-+/*
-+ * ar2313.c: Linux driver for the Atheros AR2313 Ethernet device.
-+ *
-+ * Copyright 2004 by Sameer Dekate, <sdekate@arubanetworks.com>.
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Additional credits:
-+ * 	This code is taken from John Taylor's Sibyte driver and then 
-+ * 	modified for the AR2313.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+#include <linux/sockios.h>
-+#include <linux/pkt_sched.h>
-+#include <linux/compile.h>
-+#include <linux/mii.h>
-+#include <linux/ethtool.h>
-+#include <linux/ctype.h>
-+
-+#include <net/sock.h>
-+#include <net/ip.h>
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/byteorder.h>
-+#include <asm/uaccess.h>
-+#include <asm/bootinfo.h>
-+
-+extern char *getenv(char *e);
-+
-+
-+#undef INDEX_DEBUG
-+#define DEBUG     0
-+#define DEBUG_TX  0
-+#define DEBUG_RX  0
-+#define DEBUG_INT 0
-+#define DEBUG_MC  0
-+#define DEBUG_ERR 1
-+
-+#ifndef __exit
-+#define __exit
-+#endif
-+
-+#ifndef min
-+#define min(a,b)	(((a)<(b))?(a):(b))
-+#endif
-+
-+#ifndef SMP_CACHE_BYTES
-+#define SMP_CACHE_BYTES	L1_CACHE_BYTES
-+#endif
-+
-+#ifndef SET_MODULE_OWNER
-+#define SET_MODULE_OWNER(dev)		{do{} while(0);}
-+#define AR2313_MOD_INC_USE_COUNT	MOD_INC_USE_COUNT
-+#define AR2313_MOD_DEC_USE_COUNT	MOD_DEC_USE_COUNT
-+#else
-+#define AR2313_MOD_INC_USE_COUNT	{do{} while(0);}
-+#define AR2313_MOD_DEC_USE_COUNT	{do{} while(0);}
-+#endif
-+
-+#define PHYSADDR(a)		((_ACAST32_ (a)) & 0x1fffffff)
-+
-+MODULE_PARM(ethaddr, "s");
-+static char *ethaddr = "00:00:00:00:00:00";
-+MODULE_PARM(ifname, "s");
-+static char *ifname = "bond" ;
-+
-+#define AR2313_MBOX_SET_BIT  0x8
-+
-+#define BOARD_IDX_STATIC	0
-+#define BOARD_IDX_OVERFLOW	-1
-+
-+/* margot includes */
-+#include <asm/idt-boards/rc32434/rc32434.h>
-+
-+#include "ar2313/ar2313_msg.h"
-+#include "ar2313/platform.h"
-+#include "ar2313/dma.h"
-+#include "ar2313/ar2313.h"
-+
-+/*
-+ * New interrupt handler strategy:
-+ *
-+ * An old interrupt handler worked using the traditional method of
-+ * replacing an skbuff with a new one when a packet arrives. However
-+ * the rx rings do not need to contain a static number of buffer
-+ * descriptors, thus it makes sense to move the memory allocation out
-+ * of the main interrupt handler and do it in a bottom half handler
-+ * and only allocate new buffers when the number of buffers in the
-+ * ring is below a certain threshold. In order to avoid starving the
-+ * NIC under heavy load it is however necessary to force allocation
-+ * when hitting a minimum threshold. The strategy for alloction is as
-+ * follows:
-+ *
-+ *     RX_LOW_BUF_THRES    - allocate buffers in the bottom half
-+ *     RX_PANIC_LOW_THRES  - we are very low on buffers, allocate
-+ *                           the buffers in the interrupt handler
-+ *     RX_RING_THRES       - maximum number of buffers in the rx ring
-+ *
-+ * One advantagous side effect of this allocation approach is that the
-+ * entire rx processing can be done without holding any spin lock
-+ * since the rx rings and registers are totally independent of the tx
-+ * ring and its registers.  This of course includes the kmalloc's of
-+ * new skb's. Thus start_xmit can run in parallel with rx processing
-+ * and the memory allocation on SMP systems.
-+ *
-+ * Note that running the skb reallocation in a bottom half opens up
-+ * another can of races which needs to be handled properly. In
-+ * particular it can happen that the interrupt handler tries to run
-+ * the reallocation while the bottom half is either running on another
-+ * CPU or was interrupted on the same CPU. To get around this the
-+ * driver uses bitops to prevent the reallocation routines from being
-+ * reentered.
-+ *
-+ * TX handling can also be done without holding any spin lock, wheee
-+ * this is fun! since tx_csm is only written to by the interrupt
-+ * handler.
-+ */
-+
-+/*
-+ * Threshold values for RX buffer allocation - the low water marks for
-+ * when to start refilling the rings are set to 75% of the ring
-+ * sizes. It seems to make sense to refill the rings entirely from the
-+ * intrrupt handler once it gets below the panic threshold, that way
-+ * we don't risk that the refilling is moved to another CPU when the
-+ * one running the interrupt handler just got the slab code hot in its
-+ * cache.
-+ */
-+#define RX_RING_SIZE		AR2313_DESCR_ENTRIES
-+#define RX_PANIC_THRES	        (RX_RING_SIZE/4)
-+#define RX_LOW_THRES	        ((3*RX_RING_SIZE)/4)
-+#define CRC_LEN                 4
-+#define RX_OFFSET               2
-+
-+#define AR2313_BUFSIZE		(AR2313_MTU + ETH_HLEN + CRC_LEN + RX_OFFSET)
-+
-+#ifdef MODULE
-+MODULE_AUTHOR("Sameer Dekate<sdekate@arubanetworks.com>");
-+MODULE_DESCRIPTION("AR2313 Ethernet driver");
-+#endif
-+
-+#if DEBUG
-+static char version[] __initdata = 
-+  "ar2313.c: v0.01 2004/01/06  sdekate@arubanetworks.com\n";
-+#endif /* DEBUG */
-+
-+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-+
-+// prototypes
-+static short armiiread(short phy, short reg);
-+static void armiiwrite(short phy, short reg, short data);
-+#ifdef TX_TIMEOUT
-+static void ar2313_tx_timeout(struct net_device *dev);
-+#endif
-+static void ar2313_halt(struct net_device *dev);
-+static void rx_tasklet_func(unsigned long data);
-+static void ar2313_multicast_list(struct net_device *dev);
-+
-+static struct net_device *root_dev;
-+static int probed __initdata = 0;
-+static unsigned long ar_eth_base;
-+static unsigned long ar_dma_base;
-+static unsigned long ar_int_base;
-+static unsigned long ar_int_mac_mask;
-+static unsigned long ar_int_phy_mask;
-+
-+#ifndef ERR
-+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-+#endif
-+
-+static int parse_mac_addr(struct net_device *dev, char* macstr){
-+  int i, j;
-+  unsigned char result, value;
-+  
-+  for (i=0; i<6; i++) {
-+    result = 0;
-+    if (i != 5 && *(macstr+2) != ':') {
-+      ERR("invalid mac address format: %d %c\n",
-+          i, *(macstr+2));
-+      return -EINVAL;
-+    }
-+    for (j=0; j<2; j++) {
-+      if (isxdigit(*macstr) && (value = isdigit(*macstr) ? *macstr-'0' :
-+                                toupper(*macstr)-'A'+10) < 16)
-+        {
-+          result = result*16 + value;
-+          macstr++;
-+        }
-+      else {
-+        ERR("invalid mac address "
-+            "character: %c\n", *macstr);
-+        return -EINVAL;
-+      }
-+    }
-+    
-+    macstr++;
-+    dev->dev_addr[i] = result;
-+  }
-+  
-+  return 0;
-+}
-+
-+
-+int __init ar2313_probe(void)
-+{
-+    struct net_device *dev;
-+    struct ar2313_private *sp;
-+    int version_disp;
-+    char name[64] ;
-+
-+    if (probed)
-+        return -ENODEV;
-+    probed++;
-+
-+    version_disp = 0;
-+    sprintf(name, "%s%%d", ifname) ;
-+    dev = alloc_etherdev(sizeof(struct ar2313_private));
-+
-+    if (dev == NULL) {
-+	printk(KERN_ERR "ar2313: Unable to allocate net_device structure!\n");
-+	return -ENOMEM;
-+    }
-+
-+    SET_MODULE_OWNER(dev);
-+
-+    sp = dev->priv;
-+
-+    sp->link = 0;
-+    switch (mips_machtype) {
-+    case MACH_ARUBA_AP60:
-+        ar_eth_base = 0xb8100000;
-+        ar_dma_base = ar_eth_base + 0x1000;
-+        ar_int_base = 0x1C003020;
-+        ar_int_mac_mask = RESET_ENET0|RESET_ENET1;
-+        ar_int_phy_mask = RESET_EPHY0|RESET_EPHY1;
-+        sp->mac = 1;
-+    	sp->phy = 1;
-+        dev->irq = 4;
-+        break;
-+
-+    case MACH_ARUBA_AP40:
-+        ar_eth_base = 0xb0500000;
-+        ar_dma_base = ar_eth_base + 0x1000;
-+        ar_int_base = 0x11000004;
-+        ar_int_mac_mask = 0x800;
-+        ar_int_phy_mask = 0x400;
-+        sp->mac = 0;
-+    	sp->phy = 1;
-+        dev->irq = 4;
-+        break;
-+
-+    case MACH_ARUBA_AP65:
-+        ar_eth_base = 0xb8100000;
-+        ar_dma_base = ar_eth_base + 0x1000;
-+        ar_int_base = 0x1C003020;
-+        ar_int_mac_mask = RESET_ENET0|RESET_ENET1;
-+        ar_int_phy_mask = RESET_EPHY0|RESET_EPHY1;
-+        sp->mac = 0;
-+#if 0
-+        // commented out, for now
-+
-+        if (mips_machtype == MACH_ARUBA_SAMSUNG) {
-+            sp->phy = 0x1f;
-+        } else {
-+            sp->phy = 1;
-+        }
-+#else
-+        sp->phy = 1;
-+#endif
-+        dev->irq = 3;
-+        break;
-+
-+    default:
-+        printk("%s: unsupported mips_machtype=0x%lx\n",
-+               __FUNCTION__, mips_machtype) ;
-+        return -ENODEV;
-+    }
-+
-+    spin_lock_init(&sp->lock);
-+
-+    /* initialize func pointers */
-+    dev->open = &ar2313_open;
-+    dev->stop = &ar2313_close;
-+    dev->hard_start_xmit = &ar2313_start_xmit;
-+
-+    dev->get_stats = &ar2313_get_stats;
-+    dev->set_multicast_list = &ar2313_multicast_list;
-+#ifdef TX_TIMEOUT
-+    dev->tx_timeout = ar2313_tx_timeout;
-+    dev->watchdog_timeo = AR2313_TX_TIMEOUT;
-+#endif
-+    dev->do_ioctl = &ar2313_ioctl;
-+
-+    // SAMEER: do we need this?
-+    dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA;
-+
-+    tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
-+    tasklet_disable(&sp->rx_tasklet);
-+
-+    /* display version info if adapter is found */
-+    if (!version_disp) {
-+        /* set display flag to TRUE so that */
-+        /* we only display this string ONCE */
-+	version_disp = 1;
-+#if DEBUG
-+	printk(version);
-+#endif /* DEBUG */
-+    }
-+
-+    request_region(PHYSADDR(ETHERNET_BASE), ETHERNET_SIZE*ETHERNET_MACS,
-+                   "AR2313ENET");
-+
-+    sp->eth_regs = ioremap_nocache(PHYSADDR(ETHERNET_BASE + ETHERNET_SIZE*sp->mac),
-+                                   sizeof(*sp->eth_regs));
-+    if (!sp->eth_regs) {
-+	printk("Can't remap eth registers\n");
-+	return(-ENXIO);
-+    }
-+
-+    sp->dma_regs = ioremap_nocache(PHYSADDR(DMA_BASE + DMA_SIZE*sp->mac),
-+                                   sizeof(*sp->dma_regs));
-+    dev->base_addr = (unsigned int) sp->dma_regs;
-+    if (!sp->dma_regs) {
-+	printk("Can't remap DMA registers\n");
-+	return(-ENXIO);
-+    }
-+
-+    sp->int_regs = ioremap_nocache(PHYSADDR(INTERRUPT_BASE),
-+                                   sizeof(*sp->int_regs));
-+    if (!sp->int_regs) {
-+	printk("Can't remap INTERRUPT registers\n");
-+	return(-ENXIO);
-+    }
-+
-+    strncpy(sp->name, "Atheros AR2313", sizeof (sp->name) - 1);
-+    sp->name [sizeof (sp->name) - 1] = '\0';
-+
-+    {
-+      char mac[32];
-+      extern char *getenv(char *e);
-+      unsigned char def_mac[6] = {0, 0x0b, 0x86, 0xba, 0xdb, 0xad};
-+      memset(mac, 0, 32);
-+      memcpy(mac, getenv("ethaddr"), 17);
-+      if (parse_mac_addr(dev, mac)){
-+        printk("%s: MAC address not found, using default\n", __func__);
-+        memcpy(dev->dev_addr, def_mac, 6);
-+      }
-+    }
-+
-+    sp->board_idx = BOARD_IDX_STATIC;
-+
-+    if (ar2313_init(dev)) {
-+        /*
-+         * ar2313_init() calls ar2313_init_cleanup() on error.
-+         */
-+        kfree(dev);
-+        return -ENODEV;
-+    }
-+
-+    if (register_netdev(dev)){
-+      printk("%s: register_netdev failed\n", __func__);
-+      return -1;
-+    }
-+
-+    printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
-+           dev->name, sp->name, 
-+           dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-+           dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5],
-+           dev->irq);
-+
-+    /* start link poll timer */
-+    ar2313_setup_timer(dev);
-+
-+    /*
-+     * Register the device
-+     */
-+    root_dev = dev;
-+
-+    return 0;
-+}
-+
-+#if 0
-+static void ar2313_dump_regs(struct net_device *dev)
-+{
-+    unsigned int *ptr, i;
-+    struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-+
-+    ptr = (unsigned int *)sp->eth_regs;
-+    for(i=0; i< (sizeof(ETHERNET_STRUCT)/ sizeof(unsigned int)); i++, ptr++) {
-+	    printk("ENET: %08x = %08x\n", (int)ptr, *ptr);
-+    }
-+
-+    ptr = (unsigned int *)sp->dma_regs;
-+    for(i=0; i< (sizeof(DMA)/ sizeof(unsigned int)); i++, ptr++) {
-+	    printk("DMA: %08x = %08x\n", (int)ptr, *ptr);
-+    }
-+
-+    ptr = (unsigned int *)sp->int_regs;
-+    for(i=0; i< (sizeof(INTERRUPT)/ sizeof(unsigned int)); i++, ptr++){
-+	    printk("INT: %08x = %08x\n", (int)ptr, *ptr);
-+    }
-+
-+    for (i = 0; i < AR2313_DESCR_ENTRIES; i++) {
-+	ar2313_descr_t *td = &sp->tx_ring[i];
-+        printk("Tx desc %2d: %08x %08x %08x %08x\n", i,
-+               td->status, td->devcs, td->addr, td->descr);
-+    }
-+}
-+#endif
-+
-+#ifdef TX_TIMEOUT
-+static void
-+ar2313_tx_timeout(struct net_device *dev)
-+{
-+    struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-+    unsigned long flags;
-+	
-+#if DEBUG_TX
-+    printk("Tx timeout\n");
-+#endif
-+    spin_lock_irqsave(&sp->lock, flags);
-+    ar2313_restart(dev);
-+    spin_unlock_irqrestore(&sp->lock, flags);
-+}
-+#endif
-+
-+#if DEBUG_MC
-+static void
-+printMcList(struct net_device *dev)
-+{
-+    struct dev_mc_list *list = dev->mc_list;
-+    int num=0, i;
-+    while(list){
-+    	printk("%d MC ADDR ", num);
-+    	for(i=0;i<list->dmi_addrlen;i++) {
-+    	    printk(":%02x", list->dmi_addr[i]);
-+    	}
-+	list = list->next;
-+    	printk("\n");
-+    }
-+}
-+#endif
-+
-+/*
-+ * Set or clear the multicast filter for this adaptor.
-+ * THIS IS ABSOLUTE CRAP, disabled
-+ */
-+static void
-+ar2313_multicast_list(struct net_device *dev)
-+{   
-+    /* 
-+     * Always listen to broadcasts and 
-+     * treat IFF bits independently 
-+     */
-+    struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-+    unsigned int recognise;
-+
-+    recognise = sp->eth_regs->mac_control;
-+
-+    if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
-+    	recognise |= MAC_CONTROL_PR;
-+    } else {
-+    	recognise &= ~MAC_CONTROL_PR;
-+    }
-+
-+    if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
-+#if DEBUG_MC
-+	printMcList(dev);
-+    	printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__, dev->mc_count);
-+#endif
-+    	recognise |= MAC_CONTROL_PM;/* all multicast */
-+    } else if (dev->mc_count > 0) {
-+#if DEBUG_MC
-+	printMcList(dev);
-+    	printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count);
-+#endif
-+    	recognise |= MAC_CONTROL_PM; /* for the time being */
-+    }
-+#if DEBUG_MC
-+    printk("%s: setting %08x to %08x\n", __FUNCTION__, (int)sp->eth_regs, recognise);
-+#endif
-+	
-+    sp->eth_regs->mac_control = recognise;
-+}
-+
-+static void rx_tasklet_cleanup(struct net_device *dev)
-+{
-+    struct ar2313_private *sp = dev->priv;
-+
-+    /*
-+     * Tasklet may be scheduled. Need to get it removed from the list
-+     * since we're about to free the struct.
-+     */
-+
-+    sp->unloading = 1;
-+    tasklet_enable(&sp->rx_tasklet);
-+    tasklet_kill(&sp->rx_tasklet);
-+}
-+
-+static void __exit ar2313_module_cleanup(void)
-+{
-+    rx_tasklet_cleanup(root_dev);
-+    ar2313_init_cleanup(root_dev);
-+    unregister_netdev(root_dev);
-+    kfree(root_dev);
-+    release_region(PHYSADDR(ETHERNET_BASE), ETHERNET_SIZE*ETHERNET_MACS);
-+}
-+
-+
-+/*
-+ * Restart the AR2313 ethernet controller. 
-+ */
-+static int ar2313_restart(struct net_device *dev)
-+{
-+    /* disable interrupts */
-+    disable_irq(dev->irq);
-+
-+    /* stop mac */
-+    ar2313_halt(dev);
-+    
-+    /* initialize */
-+    ar2313_init(dev);
-+    
-+    /* enable interrupts */
-+    enable_irq(dev->irq);
-+    
-+    return 0;
-+}
-+
-+extern unsigned long mips_machtype;
-+
-+int __init ar2313_module_init(void)
-+{
-+    int status=-1;
-+    switch (mips_machtype){
-+    case MACH_ARUBA_AP60:
-+    case MACH_ARUBA_AP65:
-+    case MACH_ARUBA_AP40:
-+    	root_dev = NULL;
-+    	status = ar2313_probe();
-+        break;
-+    }
-+    return status;
-+}
-+
-+
-+module_init(ar2313_module_init);
-+module_exit(ar2313_module_cleanup);
-+
-+
-+static void ar2313_free_descriptors(struct net_device *dev)
-+{
-+    struct ar2313_private *sp = dev->priv;
-+    if (sp->rx_ring != NULL) {
-+	kfree((void*)KSEG0ADDR(sp->rx_ring));
-+	sp->rx_ring = NULL;
-+	sp->tx_ring = NULL;
-+    }
-+}
-+
-+
-+static int ar2313_allocate_descriptors(struct net_device *dev)
-+{
-+    struct ar2313_private *sp = dev->priv;
-+    int size;
-+    int j;
-+    ar2313_descr_t *space;
-+
-+    if(sp->rx_ring != NULL){
-+	printk("%s: already done.\n", __FUNCTION__);
-+	return 0;
-+    }
-+
-+    size = (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
-+    space = kmalloc(size, GFP_KERNEL);
-+    if (space == NULL)
-+        return 1;
-+
-+    /* invalidate caches */
-+    dma_cache_inv((unsigned int)space, size);
-+
-+    /* now convert pointer to KSEG1 */
-+    space = (ar2313_descr_t *)KSEG1ADDR(space);
-+
-+    memset((void *)space, 0, size);
-+
-+    sp->rx_ring = space;
-+    space += AR2313_DESCR_ENTRIES;
-+
-+    sp->tx_ring = space;
-+    space += AR2313_DESCR_ENTRIES;
-+
-+    /* Initialize the transmit Descriptors */
-+    for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+	ar2313_descr_t *td = &sp->tx_ring[j];
-+	td->status = 0;
-+	td->devcs  = DMA_TX1_CHAINED;
-+	td->addr   = 0;
-+	td->descr  = K1_TO_PHYS(&sp->tx_ring[(j+1) & (AR2313_DESCR_ENTRIES-1)]);
-+    }
-+
-+    return 0;
-+}
-+
-+
-+/*
-+ * Generic cleanup handling data allocated during init. Used when the
-+ * module is unloaded or if an error occurs during initialization
-+ */
-+static void ar2313_init_cleanup(struct net_device *dev)
-+{
-+    struct ar2313_private *sp = dev->priv;
-+    struct sk_buff *skb;
-+    int j;
-+
-+    ar2313_free_descriptors(dev);
-+
-+    if (sp->eth_regs) iounmap((void*)sp->eth_regs);
-+    if (sp->dma_regs) iounmap((void*)sp->dma_regs);
-+
-+    if (sp->rx_skb) {
-+	for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+	    skb = sp->rx_skb[j];
-+	    if (skb) {
-+		sp->rx_skb[j] = NULL;
-+		dev_kfree_skb(skb);
-+	    }
-+	}
-+	kfree(sp->rx_skb);
-+	sp->rx_skb = NULL;
-+    }
-+
-+    if (sp->tx_skb) {
-+	for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+	    skb = sp->tx_skb[j];
-+	    if (skb) {
-+		sp->tx_skb[j] = NULL;
-+		dev_kfree_skb(skb);
-+	    }
-+	}
-+	kfree(sp->tx_skb);
-+	sp->tx_skb = NULL;
-+    }
-+}
-+
-+static int ar2313_setup_timer(struct net_device *dev)
-+{
-+    struct ar2313_private *sp = dev->priv; 
-+
-+    init_timer(&sp->link_timer);
-+
-+    sp->link_timer.function = ar2313_link_timer_fn;
-+    sp->link_timer.data = (int) dev;
-+    sp->link_timer.expires = jiffies + HZ;
-+
-+    add_timer(&sp->link_timer);
-+    return 0;
-+
-+}
-+
-+static void ar2313_link_timer_fn(unsigned long data)
-+{
-+    struct net_device *dev = (struct net_device *) data;
-+    struct ar2313_private *sp = dev->priv; 
-+
-+    // see if the link status changed
-+    // This was needed to make sure we set the PHY to the
-+    // autonegotiated value of half or full duplex.
-+    ar2313_check_link(dev);
-+    
-+    // Loop faster when we don't have link. 
-+    // This was needed to speed up the AP bootstrap time.
-+    if(sp->link == 0) {
-+    	mod_timer(&sp->link_timer, jiffies + HZ/2);
-+    } else {
-+    	mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
-+    }
-+}
-+
-+static void ar2313_check_link(struct net_device *dev)
-+{
-+    struct ar2313_private *sp = dev->priv;
-+    u16 phyData;
-+
-+    phyData = armiiread(sp->phy, MII_BMSR);
-+    if (sp->phyData != phyData) {
-+	if (phyData & BMSR_LSTATUS) {
-+            /* link is present, ready link partner ability to deterine duplexity */
-+            int duplex = 0;
-+            u16 reg;
-+
-+            sp->link = 1;
-+            reg = armiiread(sp->phy, MII_BMCR);
-+            if (reg & BMCR_ANENABLE) {
-+                /* auto neg enabled */
-+                reg = armiiread(sp->phy, MII_LPA);
-+                duplex = (reg & (LPA_100FULL|LPA_10FULL))? 1:0;
-+            } else {
-+                /* no auto neg, just read duplex config */
-+                duplex = (reg & BMCR_FULLDPLX)? 1:0;
-+            }
-+
-+            printk(KERN_INFO "%s: Configuring MAC for %s duplex\n", dev->name,
-+                   (duplex)? "full":"half");
-+
-+            if (duplex) {
-+                /* full duplex */
-+                sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_F) &
-+                                             ~MAC_CONTROL_DRO);
-+            } else {
-+                /* half duplex */
-+                sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_DRO) &
-+                                             ~MAC_CONTROL_F);
-+            }
-+    	} else {
-+            /* no link */
-+            sp->link = 0;
-+    	}
-+        sp->phyData = phyData;
-+    }
-+}
-+  
-+static int
-+ar2313_reset_reg(struct net_device *dev)
-+{
-+    struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-+    unsigned int ethsal, ethsah;
-+    unsigned int flags;
-+
-+    *sp->int_regs |= ar_int_mac_mask;
-+    mdelay(10);
-+    *sp->int_regs &= ~ar_int_mac_mask;
-+    mdelay(10);
-+    *sp->int_regs |= ar_int_phy_mask;
-+    mdelay(10);
-+    *sp->int_regs &= ~ar_int_phy_mask;
-+    mdelay(10);
-+
-+    sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
-+    mdelay(10);
-+    sp->dma_regs->bus_mode = ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-+
-+    /* enable interrupts */
-+    sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
-+			      DMA_STATUS_NIS |
-+			      DMA_STATUS_RI  |
-+			      DMA_STATUS_TI  |
-+			      DMA_STATUS_FBE);
-+    sp->dma_regs->xmt_base = K1_TO_PHYS(sp->tx_ring);
-+    sp->dma_regs->rcv_base = K1_TO_PHYS(sp->rx_ring);
-+    sp->dma_regs->control = (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-+    
-+    sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
-+    sp->eth_regs->vlan_tag = (0x8100);
-+
-+    /* Enable Ethernet Interface */
-+    flags = (MAC_CONTROL_TE  | /* transmit enable */
-+	     MAC_CONTROL_PM  | /* pass mcast */
-+	     MAC_CONTROL_F   | /* full duplex */
-+	     MAC_CONTROL_HBD); /* heart beat disabled */
-+
-+    if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
-+	flags |= MAC_CONTROL_PR;
-+    }
-+    sp->eth_regs->mac_control = flags;
-+
-+    /* Set all Ethernet station address registers to their initial values */
-+    ethsah = ((((u_int)(dev->dev_addr[5]) << 8) & (u_int)0x0000FF00) |
-+	      (((u_int)(dev->dev_addr[4]) << 0) & (u_int)0x000000FF));
-+
-+    ethsal = ((((u_int)(dev->dev_addr[3]) << 24) & (u_int)0xFF000000) |
-+              (((u_int)(dev->dev_addr[2]) << 16) & (u_int)0x00FF0000) |
-+              (((u_int)(dev->dev_addr[1]) <<  8) & (u_int)0x0000FF00) |
-+              (((u_int)(dev->dev_addr[0]) <<  0) & (u_int)0x000000FF) );
-+
-+    sp->eth_regs->mac_addr[0] = ethsah;
-+    sp->eth_regs->mac_addr[1] = ethsal;
-+
-+    mdelay(10);
-+
-+    return(0);
-+}
-+
-+
-+static int ar2313_init(struct net_device *dev)
-+{
-+    struct ar2313_private *sp = dev->priv;
-+    int ecode=0;
-+
-+    /*
-+     * Allocate descriptors
-+     */
-+    if (ar2313_allocate_descriptors(dev)) {
-+	printk("%s: %s: ar2313_allocate_descriptors failed\n", 
-+			dev->name, __FUNCTION__);
-+	ecode = -EAGAIN;
-+        goto init_error;
-+    }
-+
-+    /*
-+     * Get the memory for the skb rings.
-+     */
-+    if(sp->rx_skb == NULL) {
-+	sp->rx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
-+	if (!(sp->rx_skb)) {
-+	    printk("%s: %s: rx_skb kmalloc failed\n", 
-+			    dev->name, __FUNCTION__);
-+	    ecode = -EAGAIN;
-+	    goto init_error;
-+	}
-+    }
-+    memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+    if(sp->tx_skb == NULL) {
-+	sp->tx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
-+	if (!(sp->tx_skb)) {
-+	    printk("%s: %s: tx_skb kmalloc failed\n", 
-+			    dev->name, __FUNCTION__);
-+	    ecode = -EAGAIN;
-+	    goto init_error;
-+	}
-+    }
-+    memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+    /*
-+     * Set tx_csm before we start receiving interrupts, otherwise
-+     * the interrupt handler might think it is supposed to process
-+     * tx ints before we are up and running, which may cause a null
-+     * pointer access in the int handler.
-+     */
-+    sp->rx_skbprd = 0;
-+    sp->cur_rx = 0;
-+    sp->tx_prd = 0;
-+    sp->tx_csm = 0;
-+
-+    /*
-+     * Zero the stats before starting the interface
-+     */
-+    memset(&sp->stats, 0, sizeof(sp->stats));
-+
-+    /*
-+     * We load the ring here as there seem to be no way to tell the
-+     * firmware to wipe the ring without re-initializing it.
-+     */
-+    ar2313_load_rx_ring(dev, RX_RING_SIZE);
-+
-+    /* 
-+     * Init hardware
-+     */
-+    ar2313_reset_reg(dev);
-+
-+    /*
-+     * Get the IRQ
-+     */
-+    ecode = request_irq(dev->irq, &ar2313_interrupt, SA_SHIRQ | SA_INTERRUPT, dev->name, dev);
-+    if (ecode) {
-+        printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
-+	       dev->name, __FUNCTION__, dev->irq);
-+	goto init_error;
-+    }
-+
-+#if 0
-+    // commented out, for now
-+
-+    if(mips_machtype == MACH_ARUBA_SAMSUNG) {
-+      int i;
-+        /* configure Marvell 88E6060 */
-+        /* reset chip */
-+        armiiwrite(0x1f, 0xa, 0xa130);
-+        do {
-+            udelay(1000);
-+            i = armiiread(sp->phy, 0xa);
-+        } while (i & 0x8000);
-+      
-+        /* configure MAC address */
-+        armiiwrite(sp->phy, 0x1, dev->dev_addr[0] << 8 | dev->dev_addr[1]);
-+        armiiwrite(sp->phy, 0x2, dev->dev_addr[2] << 8 | dev->dev_addr[3]);
-+        armiiwrite(sp->phy, 0x3, dev->dev_addr[4] << 8 | dev->dev_addr[5]);
-+      
-+        /* set ports to forwarding */
-+        armiiwrite(0x18, 0x4, 0x3);
-+        armiiwrite(0x1c, 0x4, 0x3);
-+        armiiwrite(0x1d, 0x4, 0x3);
-+    }
-+#endif
-+
-+    tasklet_enable(&sp->rx_tasklet);
-+
-+    return 0;
-+
-+ init_error:
-+    ar2313_init_cleanup(dev);
-+    return ecode;
-+}
-+
-+/*
-+ * Load the rx ring.
-+ *
-+ * Loading rings is safe without holding the spin lock since this is
-+ * done only before the device is enabled, thus no interrupts are
-+ * generated and by the interrupt handler/tasklet handler.
-+ */
-+static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
-+{
-+
-+    struct ar2313_private *sp = ((struct net_device *)dev)->priv;
-+    short i, idx;
-+
-+    idx = sp->rx_skbprd;
-+
-+    for (i = 0; i < nr_bufs; i++) {
-+        struct sk_buff *skb;
-+	ar2313_descr_t *rd;
-+
-+	if (sp->rx_skb[idx]) {
-+#if DEBUG_RX
-+	    printk(KERN_INFO "ar2313 rx refill full\n");
-+#endif /* DEBUG */
-+	    break;
-+	}
-+
-+        // partha: create additional room for the second GRE fragment
-+	skb = alloc_skb(AR2313_BUFSIZE+128, GFP_ATOMIC);
-+	if (!skb) {
-+	    printk("\n\n\n\n %s: No memory in system\n\n\n\n", __FUNCTION__);
-+	    break;
-+	}
-+        // partha: create additional room in the front for tx pkt capture
-+        skb_reserve(skb, 32);
-+
-+	/*
-+	 * Make sure IP header starts on a fresh cache line.
-+	 */
-+	skb->dev = dev;
-+	skb_reserve(skb, RX_OFFSET);
-+	sp->rx_skb[idx] = skb;
-+
-+	rd = (ar2313_descr_t *) &sp->rx_ring[idx];
-+
-+	/* initialize dma descriptor */
-+	rd->devcs  = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+                      DMA_RX1_CHAINED);
-+	rd->addr   = virt_to_phys(skb->data);
-+	rd->descr  = virt_to_phys(&sp->rx_ring[(idx+1) & (AR2313_DESCR_ENTRIES-1)]);
-+	rd->status = DMA_RX_OWN;
-+
-+	idx = DSC_NEXT(idx);
-+    }
-+
-+    if (!i) {
-+#if DEBUG_ERR
-+        printk(KERN_INFO "Out of memory when allocating standard receive buffers\n");
-+#endif /* DEBUG */
-+    } else {
-+	sp->rx_skbprd = idx;
-+    }
-+
-+    return;
-+}
-+
-+#define AR2313_MAX_PKTS_PER_CALL        64
-+
-+static int ar2313_rx_int(struct net_device *dev)
-+{
-+    struct ar2313_private *sp = dev->priv;
-+    struct sk_buff *skb, *skb_new;
-+    ar2313_descr_t *rxdesc;
-+    unsigned int status;
-+    u32 idx;
-+    int pkts = 0;
-+    int rval;
-+
-+    idx = sp->cur_rx;
-+
-+    /* process at most the entire ring and then wait for another interrupt */
-+    while(1) {
-+
-+	rxdesc = &sp->rx_ring[idx];
-+	status = rxdesc->status;
-+	if (status & DMA_RX_OWN) {
-+	    /* SiByte owns descriptor or descr not yet filled in */
-+            rval = 0;
-+	    break;
-+	}
-+
-+        if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
-+            rval = 1;
-+            break;
-+        }
-+
-+#if DEBUG_RX
-+	printk("index %d\n", idx);
-+	printk("RX status %08x\n", rxdesc->status);
-+	printk("RX devcs  %08x\n", rxdesc->devcs );
-+	printk("RX addr   %08x\n", rxdesc->addr  );
-+	printk("RX descr  %08x\n", rxdesc->descr );
-+#endif
-+
-+        if ((status & (DMA_RX_ERROR|DMA_RX_ERR_LENGTH)) &&
-+	    (!(status & DMA_RX_LONG))){
-+#if DEBUG_RX
-+	    printk("%s: rx ERROR %08x\n", __FUNCTION__, status);
-+#endif
-+	    sp->stats.rx_errors++;
-+	    sp->stats.rx_dropped++;
-+
-+	    /* add statistics counters */
-+	    if (status & DMA_RX_ERR_CRC)    sp->stats.rx_crc_errors++;
-+	    if (status & DMA_RX_ERR_COL)    sp->stats.rx_over_errors++;
-+	    if (status & DMA_RX_ERR_LENGTH)
-+		    sp->stats.rx_length_errors++;
-+	    if (status & DMA_RX_ERR_RUNT)   sp->stats.rx_over_errors++;
-+	    if (status & DMA_RX_ERR_DESC)   sp->stats.rx_over_errors++;
-+
-+	} else {
-+	    /* alloc new buffer. */
-+	    skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
-+	    if (skb_new != NULL) {
-+
-+                skb = sp->rx_skb[idx];
-+		/* set skb */
-+                skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
-+
-+#ifdef CONFIG_MERLOT
-+		if ((dev->am_pkt_handler == NULL) || 
-+                    (dev->am_pkt_handler(skb, dev) == 0)) {
-+#endif
-+                  sp->stats.rx_bytes += skb->len;
-+                  skb->protocol = eth_type_trans(skb, dev);
-+                  /* pass the packet to upper layers */
-+
-+#ifdef CONFIG_MERLOT
-+                  if (dev->asap_netif_rx)
-+                      dev->asap_netif_rx(skb);
-+                  else
-+#endif
-+                  netif_rx(skb);
-+#ifdef CONFIG_MERLOT
-+		}
-+#endif
-+		skb_new->dev = dev;
-+		/* 16 bit align */
-+		skb_reserve(skb_new, RX_OFFSET+32);
-+		/* reset descriptor's curr_addr */
-+		rxdesc->addr = virt_to_phys(skb_new->data); 
-+
-+		sp->stats.rx_packets++;
-+		sp->rx_skb[idx] = skb_new;
-+
-+	    } else {
-+		sp->stats.rx_dropped++;
-+	    }
-+	}
-+
-+	rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | 
-+                         DMA_RX1_CHAINED);
-+	rxdesc->status = DMA_RX_OWN;
-+
-+	idx = DSC_NEXT(idx);
-+    }
-+
-+    sp->cur_rx = idx;
-+
-+    return rval;
-+}
-+
-+
-+static void ar2313_tx_int(struct net_device *dev)
-+{
-+    struct ar2313_private *sp = dev->priv;
-+    u32 idx;
-+    struct sk_buff *skb;
-+    ar2313_descr_t *txdesc;
-+    unsigned int status=0;
-+
-+    idx = sp->tx_csm;
-+
-+    while (idx != sp->tx_prd) {
-+
-+	txdesc = &sp->tx_ring[idx];
-+
-+#if DEBUG_TX
-+	printk("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n", 
-+		dev->name, sp->tx_csm, idx, sp->tx_prd,
-+	       	txdesc->status, txdesc->devcs, txdesc->addr, txdesc->descr);
-+#endif /* DEBUG */
-+
-+	if ((status = txdesc->status) & DMA_TX_OWN) {
-+	    /* ar2313 dma still owns descr */
-+	    break;
-+	}
-+	/* done with this descriptor */
-+	txdesc->status = 0;
-+
-+	if (status & DMA_TX_ERROR){
-+		sp->stats.tx_errors++;
-+		sp->stats.tx_dropped++;
-+		if(status & DMA_TX_ERR_UNDER)
-+                    sp->stats.tx_fifo_errors++;
-+		if(status & DMA_TX_ERR_HB)
-+                    sp->stats.tx_heartbeat_errors++;
-+		if(status & (DMA_TX_ERR_LOSS |
-+                             DMA_TX_ERR_LINK))
-+                    sp->stats.tx_carrier_errors++;
-+                if (status & (DMA_TX_ERR_LATE|
-+                              DMA_TX_ERR_COL |
-+                              DMA_TX_ERR_JABBER |
-+                              DMA_TX_ERR_DEFER))
-+                    sp->stats.tx_aborted_errors++;
-+	} else {
-+		/* transmit OK */
-+		sp->stats.tx_packets++;
-+	}
-+
-+	skb = sp->tx_skb[idx];
-+	sp->tx_skb[idx] = NULL;
-+	idx = DSC_NEXT(idx);
-+	sp->stats.tx_bytes += skb->len;
-+	dev_kfree_skb_irq(skb);
-+    }
-+
-+    sp->tx_csm = idx;
-+
-+    return;
-+}
-+
-+
-+static void
-+rx_tasklet_func(unsigned long data)
-+{
-+	struct net_device *dev = (struct net_device *) data;
-+	struct ar2313_private *sp = dev->priv;
-+
-+	if (sp->unloading) {
-+	    return;
-+	}
-+
-+        if (ar2313_rx_int(dev)) {
-+            tasklet_hi_schedule(&sp->rx_tasklet);
-+        }
-+        else {
-+            unsigned long flags;
-+            spin_lock_irqsave(&sp->lock, flags);
-+            sp->dma_regs->intr_ena |= DMA_STATUS_RI;
-+            spin_unlock_irqrestore(&sp->lock, flags);
-+        }
-+}
-+
-+static void
-+rx_schedule(struct net_device *dev)
-+{
-+	struct ar2313_private *sp = dev->priv;
-+
-+	sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-+
-+	tasklet_hi_schedule(&sp->rx_tasklet);
-+}
-+
-+static irqreturn_t ar2313_interrupt(int irq, void *dev_id, struct pt_regs *ptregs)
-+{
-+    struct net_device *dev = (struct net_device *)dev_id;
-+    struct ar2313_private *sp = dev->priv;
-+    unsigned int status, enabled;
-+
-+    /* clear interrupt */
-+    /*
-+     * Don't clear RI bit if currently disabled.
-+     */
-+    status = sp->dma_regs->status;
-+    enabled = sp->dma_regs->intr_ena;
-+    sp->dma_regs->status = status & enabled;
-+
-+    if (status & DMA_STATUS_NIS) {
-+	/* normal status */
-+        /*
-+         * Don't schedule rx processing if interrupt
-+         * is already disabled.
-+         */
-+	if (status & enabled & DMA_STATUS_RI) {
-+	    /* receive interrupt */
-+	    rx_schedule(dev);
-+	}
-+	if (status & DMA_STATUS_TI) {
-+	   /* transmit interrupt */
-+	    ar2313_tx_int(dev);
-+	}
-+    }
-+
-+    if (status & DMA_STATUS_AIS) {
-+#if DEBUG_INT
-+        printk("%s: AIS set %08x & %x\n", __FUNCTION__,
-+               status, (DMA_STATUS_FBE | DMA_STATUS_TPS));
-+#endif
-+	/* abnormal status */
-+	if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
-+	    ar2313_restart(dev);
-+	}
-+    }
-+    return IRQ_RETVAL(0);
-+}
-+
-+
-+static int ar2313_open(struct net_device *dev)
-+{
-+    struct ar2313_private *sp;
-+
-+    sp = dev->priv;
-+
-+    dev->mtu = 1500;
-+    netif_start_queue(dev);
-+
-+    sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-+
-+    AR2313_MOD_INC_USE_COUNT;
-+
-+    return 0;
-+}
-+
-+static void ar2313_halt(struct net_device *dev)
-+{
-+    struct ar2313_private *sp = dev->priv;
-+    int j;
-+
-+    tasklet_disable(&sp->rx_tasklet);
-+
-+    /* kill the MAC */
-+    sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
-+                                   MAC_CONTROL_TE); /* disable Transmits */
-+    /* stop dma */
-+    sp->dma_regs->control = 0;
-+    sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-+
-+    /* place phy and MAC in reset */
-+    *sp->int_regs |= (ar_int_mac_mask | ar_int_phy_mask);
-+
-+    /* free buffers on tx ring */
-+    for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+	struct sk_buff *skb;
-+	ar2313_descr_t *txdesc;
-+
-+	txdesc = &sp->tx_ring[j];
-+	txdesc->descr = 0;
-+
-+	skb = sp->tx_skb[j];
-+	if (skb) {
-+	    dev_kfree_skb(skb);
-+	    sp->tx_skb[j] = NULL;
-+	}
-+    }
-+}
-+
-+/*
-+ * close should do nothing. Here's why. It's called when
-+ * 'ifconfig bond0 down' is run. If it calls free_irq then
-+ * the irq is gone forever ! When bond0 is made 'up' again,
-+ * the ar2313_open () does not call request_irq (). Worse,
-+ * the call to ar2313_halt() generates a WDOG reset due to
-+ * the write to 'sp->int_regs' and the box reboots.
-+ * Commenting this out is good since it allows the
-+ * system to resume when bond0 is made up again.
-+ */
-+static int ar2313_close(struct net_device *dev)
-+{
-+#if 0
-+    /*
-+     * Disable interrupts
-+     */
-+    disable_irq(dev->irq);
-+    	
-+    /*
-+     * Without (or before) releasing irq and stopping hardware, this
-+     * is an absolute non-sense, by the way. It will be reset instantly
-+     * by the first irq.
-+     */
-+    netif_stop_queue(dev);
-+
-+    /* stop the MAC and DMA engines */
-+    ar2313_halt(dev);
-+
-+    /* release the interrupt */
-+    free_irq(dev->irq, dev);
-+
-+#endif
-+    AR2313_MOD_DEC_USE_COUNT;
-+    return 0;
-+}
-+
-+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+    struct ar2313_private *sp = dev->priv;
-+    ar2313_descr_t *td;
-+    u32 idx;
-+
-+    idx = sp->tx_prd;
-+    td = &sp->tx_ring[idx];
-+
-+    if (td->status & DMA_TX_OWN) {
-+#if DEBUG_TX
-+	printk("%s: No space left to Tx\n", __FUNCTION__);
-+#endif
-+        /* free skbuf and lie to the caller that we sent it out */
-+        sp->stats.tx_dropped++;
-+	dev_kfree_skb(skb);
-+
-+        /* restart transmitter in case locked */
-+        sp->dma_regs->xmt_poll = 0;
-+	return 0;
-+    }
-+
-+    /* Setup the transmit descriptor. */
-+    td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) | 
-+                 (DMA_TX1_LS|DMA_TX1_IC|DMA_TX1_CHAINED));
-+    td->addr = virt_to_phys(skb->data);
-+    td->status = DMA_TX_OWN;
-+
-+    /* kick transmitter last */
-+    sp->dma_regs->xmt_poll = 0;
-+
-+#if DEBUG_TX
-+    printk("index %d\n", idx);
-+    printk("TX status %08x\n", td->status);
-+    printk("TX devcs  %08x\n", td->devcs );
-+    printk("TX addr   %08x\n", td->addr  );
-+    printk("TX descr  %08x\n", td->descr );
-+#endif
-+
-+    sp->tx_skb[idx] = skb;
-+    idx = DSC_NEXT(idx);
-+    sp->tx_prd = idx;
-+
-+    //dev->trans_start = jiffies;
-+
-+    return 0;
-+}
-+
-+static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
-+{
-+	struct ar2313_private *np = dev->priv;
-+	u32 tmp;
-+
-+	ecmd->supported = 
-+		(SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
-+		SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
-+		SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
-+	
-+        ecmd->port = PORT_TP;
-+	/* only supports internal transceiver */
-+	ecmd->transceiver = XCVR_INTERNAL;
-+	/* not sure what this is for */
-+	ecmd->phy_address = 1;
-+
-+	ecmd->advertising = ADVERTISED_MII;
-+	tmp = armiiread(np->phy, MII_ADVERTISE);
-+	if (tmp & ADVERTISE_10HALF)
-+		ecmd->advertising |= ADVERTISED_10baseT_Half;
-+	if (tmp & ADVERTISE_10FULL)
-+		ecmd->advertising |= ADVERTISED_10baseT_Full;
-+	if (tmp & ADVERTISE_100HALF)
-+		ecmd->advertising |= ADVERTISED_100baseT_Half;
-+	if (tmp & ADVERTISE_100FULL)
-+		ecmd->advertising |= ADVERTISED_100baseT_Full;
-+
-+	tmp = armiiread(np->phy, MII_BMCR);
-+	if (tmp & BMCR_ANENABLE) {
-+		ecmd->advertising |= ADVERTISED_Autoneg;
-+		ecmd->autoneg = AUTONEG_ENABLE;
-+	} else {
-+		ecmd->autoneg = AUTONEG_DISABLE;
-+	}
-+
-+        if (ecmd->autoneg == AUTONEG_ENABLE) {
-+            tmp = armiiread(np->phy, MII_LPA);
-+            if (tmp & (LPA_100FULL|LPA_10FULL)) {
-+                ecmd->duplex = DUPLEX_FULL;
-+            } else {
-+                ecmd->duplex = DUPLEX_HALF;
-+            }
-+            if (tmp & (LPA_100FULL|LPA_100HALF)) {
-+		ecmd->speed = SPEED_100;
-+            } else {
-+		ecmd->speed = SPEED_10;
-+            }
-+        } else {
-+            if (tmp & BMCR_FULLDPLX) {
-+                ecmd->duplex = DUPLEX_FULL;
-+            } else {
-+                ecmd->duplex = DUPLEX_HALF;
-+            }
-+            if (tmp & BMCR_SPEED100) {
-+		ecmd->speed = SPEED_100;
-+            } else {
-+		ecmd->speed = SPEED_10;
-+            }
-+	}
-+
-+	/* ignore maxtxpkt, maxrxpkt for now */
-+
-+	return 0;
-+}
-+
-+static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
-+{
-+	struct ar2313_private *np = dev->priv;
-+	u32 tmp;
-+
-+	if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
-+		return -EINVAL;
-+	if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
-+		return -EINVAL;
-+	if (ecmd->port != PORT_TP)
-+		return -EINVAL;
-+	if (ecmd->transceiver != XCVR_INTERNAL)
-+		return -EINVAL;
-+	if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
-+		return -EINVAL;
-+	/* ignore phy_address, maxtxpkt, maxrxpkt for now */
-+	
-+	/* WHEW! now lets bang some bits */
-+	
-+	tmp = armiiread(np->phy, MII_BMCR);
-+	if (ecmd->autoneg == AUTONEG_ENABLE) {
-+		/* turn on autonegotiation */
-+		tmp |= BMCR_ANENABLE;
-+                printk("%s: Enabling auto-neg\n", dev->name);
-+	} else {
-+		/* turn off auto negotiation, set speed and duplexity */
-+		tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
-+		if (ecmd->speed == SPEED_100)
-+			tmp |= BMCR_SPEED100;
-+		if (ecmd->duplex == DUPLEX_FULL)
-+			tmp |= BMCR_FULLDPLX;
-+                printk("%s: Hard coding %d/%s\n", dev->name, 
-+                       (ecmd->speed == SPEED_100)? 100:10,
-+                       (ecmd->duplex == DUPLEX_FULL)? "full":"half");
-+	}
-+	armiiwrite(np->phy, MII_BMCR, tmp);
-+        np->phyData = 0;
-+	return 0;
-+}
-+
-+static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
-+{
-+	struct ar2313_private *np = dev->priv;
-+	u32 cmd;
-+	
-+	if (get_user(cmd, (u32 *)useraddr))
-+		return -EFAULT;
-+
-+        switch (cmd) {
-+	/* get settings */
-+	case ETHTOOL_GSET: {
-+		struct ethtool_cmd ecmd = { ETHTOOL_GSET };
-+		spin_lock_irq(&np->lock);
-+		netdev_get_ecmd(dev, &ecmd);
-+		spin_unlock_irq(&np->lock);
-+		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
-+			return -EFAULT;
-+		return 0;
-+	}
-+	/* set settings */
-+	case ETHTOOL_SSET: {
-+		struct ethtool_cmd ecmd;
-+		int r;
-+		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
-+			return -EFAULT;
-+		spin_lock_irq(&np->lock);
-+		r = netdev_set_ecmd(dev, &ecmd);
-+		spin_unlock_irq(&np->lock);
-+		return r;
-+	}
-+	/* restart autonegotiation */
-+	case ETHTOOL_NWAY_RST: {
-+		int tmp;
-+		int r = -EINVAL;
-+		/* if autoneg is off, it's an error */
-+		tmp = armiiread(np->phy, MII_BMCR);
-+		if (tmp & BMCR_ANENABLE) {
-+			tmp |= (BMCR_ANRESTART);
-+			armiiwrite(np->phy, MII_BMCR, tmp);
-+			r = 0;
-+		}
-+		return r;
-+	}
-+	/* get link status */
-+	case ETHTOOL_GLINK: {
-+		struct ethtool_value edata = {ETHTOOL_GLINK};
-+		edata.data = (armiiread(np->phy, MII_BMSR)&BMSR_LSTATUS) ? 1:0;
-+		if (copy_to_user(useraddr, &edata, sizeof(edata)))
-+			return -EFAULT;
-+		return 0;
-+	}
-+        }
-+	
-+	return -EOPNOTSUPP;
-+}
-+
-+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+    struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data;
-+
-+    switch (cmd) {
-+    case SIOCDEVPRIVATE: {
-+        struct ar2313_cmd scmd;
-+
-+        if (copy_from_user(&scmd, ifr->ifr_data, sizeof(scmd)))
-+	    return -EFAULT;
-+
-+#if DEBUG
-+	printk("%s: ioctl devprivate c=%d a=%x l=%d m=%d d=%x,%x\n",
-+	       dev->name, scmd.cmd,
-+	       scmd.address, scmd.length,
-+	       scmd.mailbox, scmd.data[0], scmd.data[1]);
-+#endif /* DEBUG */
-+
-+	switch (scmd.cmd) {
-+	case AR2313_READ_DATA:
-+	    if(scmd.length==4){
-+		scmd.data[0] = *((u32*)scmd.address);
-+	    } else if(scmd.length==2) {
-+		scmd.data[0] = *((u16*)scmd.address);
-+	    } else if (scmd.length==1) {
-+		scmd.data[0] = *((u8*)scmd.address);
-+	    } else {
-+		return -EOPNOTSUPP;
-+	    }
-+	    if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
-+	        return -EFAULT;
-+	    break;
-+
-+	case AR2313_WRITE_DATA:
-+	    if(scmd.length==4){
-+		*((u32*)scmd.address) = scmd.data[0];
-+	    } else if(scmd.length==2) {
-+		*((u16*)scmd.address) = scmd.data[0];
-+	    } else if (scmd.length==1) {
-+		*((u8*)scmd.address) = scmd.data[0];
-+	    } else {
-+		return -EOPNOTSUPP;
-+	    }
-+	    break;
-+
-+	case AR2313_GET_VERSION:
-+	    // SAMEER: sprintf((char*) &scmd, "%s", ARUBA_VERSION);
-+	    if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
-+	        return -EFAULT;
-+	    break;
-+
-+	default:
-+	    return -EOPNOTSUPP;
-+	}
-+	return 0;
-+    }
-+      
-+    case SIOCETHTOOL:
-+        return netdev_ethtool_ioctl(dev, (void *) ifr->ifr_data);
-+
-+    case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
-+        data->phy_id = 1;
-+        /* Fall Through */
-+
-+    case SIOCGMIIREG:		/* Read MII PHY register. */
-+    case SIOCDEVPRIVATE+1:	/* for binary compat, remove in 2.5 */
-+        data->val_out = armiiread(data->phy_id & 0x1f, 
-+                                  data->reg_num & 0x1f);
-+        return 0;
-+    case SIOCSMIIREG:		/* Write MII PHY register. */
-+    case SIOCDEVPRIVATE+2:	/* for binary compat, remove in 2.5 */
-+        if (!capable(CAP_NET_ADMIN))
-+            return -EPERM;
-+        armiiwrite(data->phy_id & 0x1f, 
-+                   data->reg_num & 0x1f, data->val_in);
-+        return 0;
-+
-+    case SIOCSIFHWADDR:
-+        if (copy_from_user(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
-+            return -EFAULT;
-+        return 0;
-+
-+    case SIOCGIFHWADDR:
-+        if (copy_to_user(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
-+            return -EFAULT;
-+        return 0;
-+
-+    default:
-+        break;
-+    }
-+
-+    return -EOPNOTSUPP;
-+}
-+
-+static struct net_device_stats *ar2313_get_stats(struct net_device *dev)
-+{
-+  struct ar2313_private *sp = dev->priv;
-+    return &sp->stats;
-+}
-+
-+static short
-+armiiread(short phy, short reg)
-+{
-+  volatile ETHERNET_STRUCT * ethernet;
-+
-+  ethernet = (volatile ETHERNET_STRUCT *)ETHERNET_BASE; /* always MAC 0 */
-+  ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
-+                        (phy << MII_ADDR_PHY_SHIFT));
-+  while (ethernet->mii_addr & MII_ADDR_BUSY);
-+  return (ethernet->mii_data >> MII_DATA_SHIFT);
-+}
-+
-+static void
-+armiiwrite(short phy, short reg, short data)
-+{
-+  volatile ETHERNET_STRUCT * ethernet;
-+
-+  ethernet = (volatile ETHERNET_STRUCT *)ETHERNET_BASE; /* always MAC 0 */
-+  while (ethernet->mii_addr & MII_ADDR_BUSY);
-+  ethernet->mii_data = data << MII_DATA_SHIFT;
-+  ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
-+                        (phy << MII_ADDR_PHY_SHIFT) |
-+                        MII_ADDR_WRITE);
-+}
-+
diff --git a/openwrt/target/linux/aruba-2.6/patches/011-ap6x_serial_fix.patch b/openwrt/target/linux/aruba-2.6/patches/011-ap6x_serial_fix.patch
deleted file mode 100644
index 528d0e90fb..0000000000
--- a/openwrt/target/linux/aruba-2.6/patches/011-ap6x_serial_fix.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-diff -urN linux.old/drivers/serial/8250.c linux.net/drivers/serial/8250.c
---- linux.old/drivers/serial/8250.c	2006-01-15 07:16:02.000000000 +0100
-+++ linux.net/drivers/serial/8250.c	2006-01-30 06:12:30.509342250 +0100
-@@ -1510,7 +1510,7 @@
- {
- 	struct uart_8250_port *up = (struct uart_8250_port *)port;
- 	unsigned long flags;
--	unsigned char lsr, iir;
-+//	unsigned char lsr, iir;
- 	int retval;
- 
- 	up->capabilities = uart_config[up->port.type].flags;
-@@ -1615,6 +1615,8 @@
- 
- 	serial8250_set_mctrl(&up->port, up->port.mctrl);
- 
-+// For some reason this test causes problems on the AP6x serial console
-+#if 0
- 	/*
- 	 * Do a quick test to see if we receive an
- 	 * interrupt when we enable the TX irq.
-@@ -1633,7 +1635,8 @@
- 	} else {
- 		up->bugs &= ~UART_BUG_TXEN;
- 	}
--
-+#endif
-+	
- 	spin_unlock_irqrestore(&up->port.lock, flags);
- 
- 	/*
diff --git a/openwrt/target/linux/aruba-2.6/patches/012-ehci_softirq.patch b/openwrt/target/linux/aruba-2.6/patches/012-ehci_softirq.patch
deleted file mode 100644
index ae7f9f26c8..0000000000
--- a/openwrt/target/linux/aruba-2.6/patches/012-ehci_softirq.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-diff -Nurb linux-2.6.16.1/drivers/usb/host/ehci.h linux-patched/drivers/usb/host/ehci.h
---- linux-2.6.16.1/drivers/usb/host/ehci.h	2006-03-27 22:49:02.000000000 -0800
-+++ linux-patched/drivers/usb/host/ehci.h	2006-04-07 12:07:30.000000000 -0700
-@@ -82,6 +82,7 @@
- 	struct dma_pool		*sitd_pool;	/* sitd per split iso urb */
- 
- 	struct timer_list	watchdog;
-+	struct timer_list	softirq;
- 	struct notifier_block	reboot_notifier;
- 	unsigned long		actions;
- 	unsigned		stamp;
-diff -Nurb linux-2.6.16.1/drivers/usb/host/ehci-hcd.c linux-patched/drivers/usb/host/ehci-hcd.c
---- linux-2.6.16.1/drivers/usb/host/ehci-hcd.c	2006-03-27 22:49:02.000000000 -0800
-+++ linux-patched/drivers/usb/host/ehci-hcd.c	2006-04-07 13:20:13.000000000 -0700
-@@ -116,6 +116,7 @@
- #define EHCI_IO_JIFFIES		(HZ/10)		/* io watchdog > irq_thresh */
- #define EHCI_ASYNC_JIFFIES	(HZ/20)		/* async idle timeout */
- #define EHCI_SHRINK_JIFFIES	(HZ/200)	/* async qh unlink delay */
-+#define EHCI_SOFTIRQ		(HZ/400)
- 
- /* Initial IRQ latency:  faster than hw default */
- static int log2_irq_thresh = 0;		// 0 to 6
-@@ -263,6 +264,16 @@
- #include "ehci-sched.c"
- 
- /*-------------------------------------------------------------------------*/
-+static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs);
-+
-+static void ehci_softirq (unsigned long param)
-+{
-+	struct ehci_hcd         *ehci = (struct ehci_hcd *) param;
-+
-+	if (ehci_irq(ehci_to_hcd(ehci),0) != IRQ_NONE)
-+		set_bit(HCD_FLAG_SAW_IRQ, &(ehci_to_hcd(ehci))->flags);
-+	mod_timer (&ehci->softirq, jiffies + EHCI_SOFTIRQ);
-+}
- 
- static void ehci_watchdog (unsigned long param)
- {
-@@ -280,6 +291,10 @@
- 			COUNT (ehci->stats.lost_iaa);
- 			writel (STS_IAA, &ehci->regs->status);
- 			ehci->reclaim_ready = 1;
-+			if (!timer_pending(&ehci->softirq)) {
-+				ehci_info(ehci, "switching to softirq\n");
-+				mod_timer (&ehci->softirq, jiffies + EHCI_SOFTIRQ);
-+			}
- 		}
- 	}
- 
-@@ -371,6 +388,7 @@
- 
- 	/* no more interrupts ... */
- 	del_timer_sync (&ehci->watchdog);
-+	del_timer_sync (&ehci->softirq);
- 
- 	spin_lock_irq(&ehci->lock);
- 	if (HC_IS_RUNNING (hcd->state))
-@@ -418,6 +436,10 @@
- 	ehci->watchdog.function = ehci_watchdog;
- 	ehci->watchdog.data = (unsigned long) ehci;
- 
-+	init_timer(&ehci->softirq);
-+	ehci->softirq.function = ehci_softirq;
-+	ehci->softirq.data = (unsigned long) ehci;
-+
- 	/*
- 	 * hw default: 1K periodic list heads, one per frame.
- 	 * periodic_size can shrink by USBCMD update if hcc_params allows.
-
diff --git a/openwrt/target/linux/au1000-2.6/Makefile b/openwrt/target/linux/au1000-2.6/Makefile
deleted file mode 100644
index 4b596f603a..0000000000
--- a/openwrt/target/linux/au1000-2.6/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-LINUX_VERSION:=2.6.16.7
-LINUX_RELEASE:=1
-LINUX_KERNEL_MD5SUM:=9682b2bd6e02f3087982d7c3f5ba824e
-
-include ../rules.mk
-include ./config
-
-include ../generic-$(KERNEL)/modules.mk
-include ../kernel.mk
-
-
-$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
-	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
-	@$(CP) config $(LINUX_DIR)/.config
-	touch $@
-
-$(LINUX_BUILD_DIR)/zImage.flash.srec: $(LINUX_DIR)/arch/mips/boot/compressed/images/zImage.flash.srec $(LINUX_DIR)/arch/mips/boot/compressed/images/zImage.srec
-	$(MAKE) -C $(LINUX_DIR) V=1 CROSS_COMPILE=$(TARGET_CROSS) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) zImage.flash $(MAKE_TRACE)
-	$(CP) $(LINUX_DIR)/arch/mips/boot/compressed/images/zImage.flash.srec $(LINUX_DIR)/zImage.flash.srec
-	$(CP) $(LINUX_DIR)/arch/mips/boot/compressed/images/zImage.srec $(LINUX_DIR)/zImage.srec
-	touch $@
-
-compile: $(LINUX_DIR)/vmlinux
diff --git a/openwrt/target/linux/au1000-2.6/config b/openwrt/target/linux/au1000-2.6/config
deleted file mode 100644
index b274fcfd55..0000000000
--- a/openwrt/target/linux/au1000-2.6/config
+++ /dev/null
@@ -1,1477 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.7
-# Sat Apr 29 20:33:29 2006
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_MIPS_MTX1=y
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1500=y
-CONFIG_SOC_AU1X00=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
-CONFIG_64BIT_PHYS_ADDR=y
-# CONFIG_CPU_ADVANCED is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=m
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_IPSEC_NAT_TRAVERSAL is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_DIAG is not set
-CONFIG_TCP_CONG_ADVANCED=y
-
-#
-# TCP congestion control
-#
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_TCP_CONG_CUBIC is not set
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
-CONFIG_TCP_CONG_SCALABLE=m
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_NETBIOS_NS=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_SIP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-CONFIG_IP_NF_MATCH_LAYER7_DEBUG=y
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_IMQ=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-# CONFIG_IP6_NF_IPTABLES is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-# CONFIG_NET_SCH_ESFQ is not set
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-# CONFIG_NET_ACT_IPT is not set
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ALCHEMY is not set
-CONFIG_MTD_MTX1=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_IFB is not set
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-# CONFIG_IMQ_BEHAVIOR_AA is not set
-# CONFIG_IMQ_BEHAVIOR_AB is not set
-CONFIG_IMQ_BEHAVIOR_BA=y
-# CONFIG_IMQ_BEHAVIOR_BB is not set
-CONFIG_IMQ_NUM_DEVS=2
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-CONFIG_STRIP=m
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-CONFIG_PCI_HERMES=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-CONFIG_PRISM54=m
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-CONFIG_SHAPER=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_AU1X00=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AU1X00 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_MTX1_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRPRIME=m
-# CONFIG_USB_SERIAL_ANYDATA is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP2101=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_AUERSWALD=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_LD=m
-CONFIG_USB_TEST=m
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-CONFIG_DEVFS_DEBUG=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_VMALLOC is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="init=/etc/preinit"
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/openwrt/target/linux/au1000-2.6/patches/001-redefinitions_fixes.patch b/openwrt/target/linux/au1000-2.6/patches/001-redefinitions_fixes.patch
deleted file mode 100644
index f2c524a030..0000000000
--- a/openwrt/target/linux/au1000-2.6/patches/001-redefinitions_fixes.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- linux-2.6.16.2/drivers/usb/host/ohci-pci.c	2006-04-07 18:56:47.000000000 +0200
-+++ linux-2.6.16.2.new/drivers/usb/host/ohci-pci.c	2006-04-11 14:20:33.000000000 +0200
-@@ -215,7 +215,7 @@
- #endif
- };
- 
-- 
-+/* 
- static int __init ohci_hcd_pci_init (void) 
- {
- 	printk (KERN_DEBUG "%s: " DRIVER_INFO " (PCI)\n", hcd_name);
-@@ -227,11 +227,12 @@
- 	return pci_register_driver (&ohci_pci_driver);
- }
- module_init (ohci_hcd_pci_init);
--
-+*/
- /*-------------------------------------------------------------------------*/
--
-+/*
- static void __exit ohci_hcd_pci_cleanup (void) 
- {	
- 	pci_unregister_driver (&ohci_pci_driver);
- }
- module_exit (ohci_hcd_pci_cleanup);
-+*/
diff --git a/openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch b/openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch
deleted file mode 100644
index 9a6b05b146..0000000000
--- a/openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-diff -urN linux-2.6.16.7/drivers/mtd/maps/alchemy-flash.c linux-2.6.16.7.new/drivers/mtd/maps/alchemy-flash.c
---- linux-2.6.16.7/drivers/mtd/maps/alchemy-flash.c	2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7.new/drivers/mtd/maps/alchemy-flash.c	2006-04-20 19:16:26.000000000 +0200
-@@ -105,6 +105,12 @@
- #define USE_LOCAL_ACCESSORS /* why? */
- #endif
- 
-+#ifdef CONFIG_MIPS_MTX1
-+#define BOARD_MAP_NAME "MTX-1 Flash"
-+#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-+#endif
-+
- static struct map_info alchemy_map = {
- 	.name =	BOARD_MAP_NAME,
- };
diff --git a/openwrt/target/linux/au1000-2.6/patches/003-zImage.patch b/openwrt/target/linux/au1000-2.6/patches/003-zImage.patch
deleted file mode 100644
index 1d4c6ad5d1..0000000000
--- a/openwrt/target/linux/au1000-2.6/patches/003-zImage.patch
+++ /dev/null
@@ -1,1364 +0,0 @@
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/head.S linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/head.S
---- linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/head.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/head.S	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,119 @@
-+/*
-+ * arch/mips/kernel/head.S
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 1994, 1995 Waldorf Electronics
-+ * Written by Ralf Baechle and Andreas Busse
-+ * Copyright (C) 1995 - 1999 Ralf Baechle
-+ * Copyright (C) 1996 Paul M. Antoine
-+ * Modified for DECStation and hence R3000 support by Paul M. Antoine
-+ * Further modifications by David S. Miller and Harald Koerfgen
-+ * Copyright (C) 1999 Silicon Graphics, Inc.
-+ *
-+ * Head.S contains the MIPS exception handler and startup code.
-+ *
-+ **************************************************************************
-+ *  9 Nov, 2000.
-+ *  Added Cache Error exception handler and SBDDP EJTAG debug exception.
-+ *
-+ *  Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
-+ *  Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
-+ **************************************************************************
-+ */
-+#include <linux/config.h>
-+#include <linux/threads.h>
-+
-+#include <asm/asm.h>
-+#include <asm/cacheops.h>
-+#include <asm/mipsregs.h>
-+#include <asm/cachectl.h>
-+#include <asm/regdef.h>
-+
-+#define IndexInvalidate_I       0x00
-+#define IndexWriteBack_D        0x01
-+
-+	.set noreorder
-+	.cprestore
-+	LEAF(start)
-+start:
-+	bal	locate
-+	nop
-+locate:
-+	subu	s8, ra, 8	/* Where we were loaded */
-+	la	sp, (.stack + 8192)
-+
-+	move	s0, a0		/* Save boot rom start args */
-+	move	s1, a1
-+	move	s2, a2
-+	move	s3, a3
-+
-+	la	a0, start	/* Where we were linked to run */
-+
-+	move	a1, s8
-+	la	a2, _edata
-+	subu	t1, a2, a0
-+	srl	t1, t1, 2
-+
-+	/* copy text section */
-+	li	t0, 0
-+1:	lw	v0, 0(a1)
-+	nop
-+	sw	v0, 0(a0)
-+	xor	t0, t0, v0
-+	addu	a0, 4
-+	bne	a2, a0, 1b
-+	addu	a1, 4
-+
-+	/* Clear BSS */
-+	la	a0, _edata
-+	la	a2, _end
-+2:	sw	zero, 0(a0)
-+	bne	a2, a0, 2b
-+	addu	a0, 4
-+
-+	/* push the D-Cache and invalidate I-Cache */
-+	li	k0, 0x80000000  # start address
-+	li	k1, 0x80004000  # end address (16KB I-Cache)
-+	subu	k1, 128
-+
-+1:
-+	.set mips3
-+	cache	IndexWriteBack_D, 0(k0)
-+	cache	IndexWriteBack_D, 32(k0)
-+	cache	IndexWriteBack_D, 64(k0)
-+	cache	IndexWriteBack_D, 96(k0)
-+	cache	IndexInvalidate_I, 0(k0)
-+	cache	IndexInvalidate_I, 32(k0)
-+	cache	IndexInvalidate_I, 64(k0)
-+	cache	IndexInvalidate_I, 96(k0)
-+	.set mips0
-+
-+	bne	k0, k1, 1b
-+	addu	k0, k0, 128
-+	/* done */
-+
-+	move	a0, s8		     /* load address */
-+	move	a1, t1               /* length in words */
-+	move	a2, t0               /* checksum */
-+	move	a3, sp
-+
-+	la	ra, 1f
-+	la	k0, decompress_kernel
-+	jr	k0
-+	nop
-+1:
-+
-+	move	a0, s0
-+	move	a1, s1
-+	move	a2, s2
-+	move	a3, s3
-+	li	k0, KERNEL_ENTRY
-+	jr	k0
-+	nop
-+3:
-+	b 3b
-+	END(start)
-+	.comm .stack,4096*2,4
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/Makefile
---- linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/Makefile	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,110 @@
-+# arch/mips/boot/compressed/au1xxx/Makefile
-+# 
-+# Makefile for AMD Alchemy Semiconductor Au1x based boards.
-+# All of the boot loader code was derived from the ppc
-+# boot code.
-+#
-+# Copyright 2001,2002 MontaVista Software Inc.
-+#
-+# Author: Mark A. Greer
-+#	  mgreer@mvista.com
-+#
-+# Copyright 2004 Embedded Alley Solutions, Inc
-+# Ported and modified for mips 2.6 support by 
-+# Pete Popov <ppopov@embeddedalley.com>
-+#
-+# This program is free software; you can redistribute  it and/or modify it
-+# under  the terms of  the GNU General  Public License as published by the
-+# Free Software Foundation;  either version 2 of the  License, or (at your
-+# option) any later version.
-+
-+boot		:= arch/mips/boot
-+compressed	:= $(boot)/compressed
-+utils		:= $(compressed)/utils
-+lib		:= $(compressed)/lib
-+images		:= $(compressed)/images
-+common		:= $(compressed)/common
-+
-+#########################################################################
-+# START BOARD SPECIFIC VARIABLES
-+
-+# These two variables control where the zImage is stored
-+# in flash and loaded in memory.  It only controls how the srec
-+# file is generated, the code is the same.
-+RAM_RUN_ADDR = 0x81000000
-+
-+ifdef CONFIG_MIPS_XXS1500
-+FLASH_LOAD_ADDR = 0xBF000000
-+else
-+FLASH_LOAD_ADDR = 0xBFD00000
-+endif
-+
-+# These two variables specify the free ram region
-+# that can be used for temporary malloc area
-+AVAIL_RAM_START=0x80500000
-+AVAIL_RAM_END=0x80900000
-+
-+# This one must match the LOADADDR in arch/mips/Makefile!
-+LOADADDR=0x80100000
-+
-+# WARNING WARNING WARNING
-+# Note that with a LOADADDR of 0x80100000 and AVAIL_RAM_START of
-+# 0x80500000, the max decompressed kernel size can be 4MB. Else we
-+# start overwriting ourselve. You can change these vars as needed;
-+# it would be much better if we just figured everything out on the fly.
-+
-+# END BOARD SPECIFIC VARIABLES
-+#########################################################################
-+
-+OBJECTS	:= $(obj)/head.o $(common)/misc-common.o $(common)/misc-simple.o \
-+	$(common)/au1k_uart.o
-+LIBS := $(lib)/lib.a
-+
-+ENTRY := $(utils)/entry
-+OFFSET := $(utils)/offset
-+SIZE := $(utils)/size
-+
-+LD_ARGS := -T $(compressed)/ld.script -Ttext $(RAM_RUN_ADDR) -Bstatic
-+
-+ifdef CONFIG_CPU_LITTLE_ENDIAN
-+OBJCOPY_ARGS = -O elf32-tradlittlemips
-+else
-+OBJCOPY_ARGS = -O elf32-tradbigmips
-+endif
-+
-+$(obj)/head.o: $(obj)/head.S $(TOPDIR)/vmlinux
-+	$(CC) -I $(TOPDIR)/include $(AFLAGS) \
-+	-DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) $(TOPDIR)/vmlinux ) \
-+	-c -o $*.o $<
-+
-+$(common)/misc-simple.o:
-+	$(CC) -I $(TOPDIR)/include $(CFLAGS) -DINITRD_OFFSET=0 -DINITRD_SIZE=0 -DZIMAGE_OFFSET=0 \
-+		-DAVAIL_RAM_START=$(AVAIL_RAM_START) \
-+		-DAVAIL_RAM_END=$(AVAIL_RAM_END) \
-+		-DLOADADDR=$(LOADADDR) \
-+		-DZIMAGE_SIZE=0 -c -o $@ $*.c
-+
-+$(obj)/zvmlinux: $(OBJECTS) $(LIBS) $(srctree)/$(compressed)/ld.script $(images)/vmlinux.gz $(common)/dummy.o
-+	$(OBJCOPY) \
-+		--add-section=.image=$(images)/vmlinux.gz \
-+		--set-section-flags=.image=contents,alloc,load,readonly,data \
-+		$(common)/dummy.o $(common)/image.o
-+	$(LD) $(LD_ARGS) -o $@ $(OBJECTS) $(common)/image.o $(LIBS)
-+	$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R __kcrctab -R __ksymtab_strings \
-+	-R .comment -R .stab -R .stabstr -R .initrd -R .sysmap
-+
-+# Here we manipulate the image in order to get it the necessary
-+# srecord file we need.
-+zImage: $(obj)/zvmlinux
-+	mv $(obj)/zvmlinux $(images)/zImage
-+	$(OBJCOPY) -O srec $(images)/zImage $(images)/zImage.srec
-+	$(OBJCOPY) -O binary $(images)/zImage $(images)/zImage.bin
-+
-+zImage.flash: zImage
-+	( \
-+	flash=${FLASH_LOAD_ADDR} ; \
-+	ram=${RAM_RUN_ADDR} ; \
-+	adjust=$$[ $$flash - $$ram ] ; \
-+	$(OBJCOPY) -O srec --adjust-vma `printf '0x%08x' $$adjust` \
-+		$(images)/zImage $(images)/zImage.flash.srec ; \
-+	)
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/au1k_uart.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/au1k_uart.c
---- linux-2.6.16.7/arch/mips/boot/compressed/common/au1k_uart.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/au1k_uart.c	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,103 @@
-+/*
-+ * BRIEF MODULE DESCRIPTION
-+ *	Simple Au1000 uart routines.
-+ *
-+ * Copyright 2001 MontaVista Software Inc.
-+ * Author: MontaVista Software, Inc.
-+ *		ppopov@mvista.com or source@mvista.com
-+ *
-+ *  This program is free software; you can redistribute	 it and/or modify it
-+ *  under  the terms of	 the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the	License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
-+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
-+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/config.h>
-+#include <asm/io.h>
-+#include <asm/mach-au1x00/au1000.h>
-+#include "ns16550.h"
-+
-+typedef         unsigned char uint8;
-+typedef         unsigned int  uint32;
-+
-+#define         UART16550_BAUD_2400             2400
-+#define         UART16550_BAUD_4800             4800
-+#define         UART16550_BAUD_9600             9600
-+#define         UART16550_BAUD_19200            19200
-+#define         UART16550_BAUD_38400            38400
-+#define         UART16550_BAUD_57600            57600
-+#define         UART16550_BAUD_115200           115200
-+
-+#define         UART16550_PARITY_NONE           0
-+#define         UART16550_PARITY_ODD            0x08
-+#define         UART16550_PARITY_EVEN           0x18
-+#define         UART16550_PARITY_MARK           0x28
-+#define         UART16550_PARITY_SPACE          0x38
-+
-+#define         UART16550_DATA_5BIT             0x0
-+#define         UART16550_DATA_6BIT             0x1
-+#define         UART16550_DATA_7BIT             0x2
-+#define         UART16550_DATA_8BIT             0x3
-+
-+#define         UART16550_STOP_1BIT             0x0
-+#define         UART16550_STOP_2BIT             0x4
-+
-+/* It would be nice if we had a better way to do this.
-+ * It could be a variable defined in one of the board specific files.
-+ */
-+#undef UART_BASE
-+#ifdef CONFIG_COGENT_CSB250
-+#define UART_BASE UART3_ADDR
-+#else
-+#define UART_BASE UART0_ADDR
-+#endif
-+
-+/* memory-mapped read/write of the port */
-+#define UART16550_READ(y)    (au_readl(UART_BASE + y) & 0xff)
-+#define UART16550_WRITE(y,z) (au_writel(z&0xff, UART_BASE + y))
-+
-+/*
-+ * We use uart 0, which is already initialized by
-+ * yamon. 
-+ */
-+volatile struct NS16550 *
-+serial_init(int chan)
-+{
-+	volatile struct NS16550 *com_port;
-+	com_port = (struct NS16550 *) UART_BASE;
-+	return (com_port);
-+}
-+
-+void
-+serial_putc(volatile struct NS16550 *com_port, unsigned char c)
-+{
-+	while ((UART16550_READ(UART_LSR)&0x40) == 0);
-+	UART16550_WRITE(UART_TX, c);
-+}
-+
-+unsigned char
-+serial_getc(volatile struct NS16550 *com_port)
-+{
-+	while((UART16550_READ(UART_LSR) & 0x1) == 0);
-+	return UART16550_READ(UART_RX);
-+}
-+
-+int
-+serial_tstc(volatile struct NS16550 *com_port)
-+{
-+	return((UART16550_READ(UART_LSR) & LSR_DR) != 0);
-+}
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/dummy.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/dummy.c
---- linux-2.6.16.7/arch/mips/boot/compressed/common/dummy.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/dummy.c	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,4 @@
-+int main(void)
-+{
-+	return 0;
-+}
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/common/Makefile
---- linux-2.6.16.7/arch/mips/boot/compressed/common/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/Makefile	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,14 @@
-+#
-+# arch/mips/boot/compressed/common/Makefile
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License.  See the file "COPYING" in the main directory of this archive
-+# for more details.
-+#
-+# Tom Rini	January 2001
-+#
-+# Pete Popov, 2004
-+#
-+
-+lib-y		:= misc-common.o no_initrd.o dummy.o
-+lib-$(CONFIG_SOC_AU1X00)	+= au1k_uart.o
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/misc-common.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-common.c
---- linux-2.6.16.7/arch/mips/boot/compressed/common/misc-common.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-common.c	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,434 @@
-+/*
-+ * arch/mips/boot/compressed/common/misc-common.c
-+ * 
-+ * Misc. bootloader code (almost) all platforms can use
-+ *
-+ * Author: Johnnie Peters <jpeters@mvista.com>
-+ * Editor: Tom Rini <trini@mvista.com>
-+ *
-+ * Derived from arch/ppc/boot/prep/misc.c
-+ *
-+ * Ported by Pete Popov <ppopov@mvista.com> to
-+ * support mips board(s).  I also got rid of the vga console
-+ * code.
-+ *
-+ * Copyright 2000-2001 MontaVista Software Inc.
-+ *
-+ * Ported to MIPS 2.6 by Pete Popov, <ppopov@embeddedalley.com>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR   IMPLIED
-+ * WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ * NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT,  INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ * USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the  GNU General Public License along
-+ * with this program; if not, write  to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <stdarg.h>	/* for va_ bits */
-+#include <linux/config.h>
-+#include <linux/string.h>
-+#include <linux/zlib.h>
-+
-+extern char *avail_ram;
-+extern char *end_avail;
-+extern char _end[];
-+
-+void puts(const char *);
-+void putc(const char c);
-+void puthex(unsigned long val);
-+void _bcopy(char *src, char *dst, int len);
-+void gunzip(void *, int, unsigned char *, int *);
-+static int _cvt(unsigned long val, char *buf, long radix, char *digits);
-+
-+void _vprintk(void(*)(const char), const char *, va_list ap);
-+
-+struct NS16550 *com_port;
-+
-+int serial_tstc(volatile struct NS16550 *);
-+unsigned char serial_getc(volatile struct NS16550 *);
-+void serial_putc(volatile struct NS16550 *, unsigned char);
-+
-+void pause(void)
-+{
-+	puts("pause\n");
-+}
-+
-+void exit(void)
-+{
-+	puts("exit\n");
-+	while(1); 
-+}
-+
-+int tstc(void)
-+{
-+	return (serial_tstc(com_port));
-+}
-+
-+int getc(void)
-+{
-+	while (1) {
-+		if (serial_tstc(com_port))
-+			return (serial_getc(com_port));
-+	}
-+}
-+
-+void 
-+putc(const char c)
-+{
-+	serial_putc(com_port, c);
-+	if ( c == '\n' )
-+		serial_putc(com_port, '\r');
-+}
-+
-+void puts(const char *s)
-+{
-+	char c;
-+	while ( ( c = *s++ ) != '\0' ) {
-+	        serial_putc(com_port, c);
-+	        if ( c == '\n' ) serial_putc(com_port, '\r');
-+	}
-+}
-+
-+void error(char *x)
-+{
-+	puts("\n\n");
-+	puts(x);
-+	puts("\n\n -- System halted");
-+
-+	while(1);	/* Halt */
-+}
-+
-+static void *zalloc(unsigned size)
-+{
-+	void *p = avail_ram;
-+
-+	size = (size + 7) & -8;
-+	avail_ram += size;
-+	if (avail_ram > end_avail) {
-+		puts("oops... out of memory\n");
-+		pause();
-+	}
-+	return p;
-+}
-+
-+
-+#define HEAD_CRC	2
-+#define EXTRA_FIELD	4
-+#define ORIG_NAME	8
-+#define COMMENT		0x10
-+#define RESERVED	0xe0
-+
-+#define DEFLATED	8
-+
-+void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
-+{
-+	z_stream s;
-+	int r, i, flags;
-+
-+	/* skip header */
-+	i = 10;
-+	flags = src[3];
-+	if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
-+		puts("bad gzipped data\n");
-+		exit();
-+	}
-+	if ((flags & EXTRA_FIELD) != 0)
-+		i = 12 + src[10] + (src[11] << 8);
-+	if ((flags & ORIG_NAME) != 0)
-+		while (src[i++] != 0)
-+			;
-+	if ((flags & COMMENT) != 0)
-+		while (src[i++] != 0)
-+			;
-+	if ((flags & HEAD_CRC) != 0)
-+		i += 2;
-+	if (i >= *lenp) {
-+		puts("gunzip: ran out of data in header\n");
-+		exit();
-+	}
-+
-+	/* Initialize ourself. */
-+	s.workspace = zalloc(zlib_inflate_workspacesize());
-+	r = zlib_inflateInit2(&s, -MAX_WBITS);
-+	if (r != Z_OK) {
-+		puts("zlib_inflateInit2 returned "); puthex(r); puts("\n");
-+		exit();
-+	}
-+	s.next_in = src + i;
-+	s.avail_in = *lenp - i;
-+	s.next_out = dst;
-+	s.avail_out = dstlen;
-+	r = zlib_inflate(&s, Z_FINISH);
-+	if (r != Z_OK && r != Z_STREAM_END) {
-+		puts("inflate returned "); puthex(r); puts("\n");
-+		exit();
-+	}
-+	*lenp = s.next_out - (unsigned char *) dst;
-+	zlib_inflateEnd(&s);
-+}
-+
-+void
-+puthex(unsigned long val)
-+{
-+
-+	unsigned char buf[10];
-+	int i;
-+	for (i = 7;  i >= 0;  i--)
-+	{
-+		buf[i] = "0123456789ABCDEF"[val & 0x0F];
-+		val >>= 4;
-+	}
-+	buf[8] = '\0';
-+	puts(buf);
-+}
-+
-+#define FALSE 0
-+#define TRUE  1
-+
-+void
-+_printk(char const *fmt, ...)
-+{
-+	va_list ap;
-+
-+	va_start(ap, fmt);
-+	_vprintk(putc, fmt, ap);
-+	va_end(ap);
-+	return;
-+}
-+
-+#define is_digit(c) ((c >= '0') && (c <= '9'))
-+
-+void
-+_vprintk(void(*putc)(const char), const char *fmt0, va_list ap)
-+{
-+	char c, sign, *cp = 0;
-+	int left_prec, right_prec, zero_fill, length = 0, pad, pad_on_right;
-+	char buf[32];
-+	long val;
-+	while ((c = *fmt0++))
-+	{
-+		if (c == '%')
-+		{
-+			c = *fmt0++;
-+			left_prec = right_prec = pad_on_right = 0;
-+			if (c == '-')
-+			{
-+				c = *fmt0++;
-+				pad_on_right++;
-+			}
-+			if (c == '0')
-+			{
-+				zero_fill = TRUE;
-+				c = *fmt0++;
-+			} else
-+			{
-+				zero_fill = FALSE;
-+			}
-+			while (is_digit(c))
-+			{
-+				left_prec = (left_prec * 10) + (c - '0');
-+				c = *fmt0++;
-+			}
-+			if (c == '.')
-+			{
-+				c = *fmt0++;
-+				zero_fill++;
-+				while (is_digit(c))
-+				{
-+					right_prec = (right_prec * 10) + (c - '0');
-+					c = *fmt0++;
-+				}
-+			} else
-+			{
-+				right_prec = left_prec;
-+			}
-+			sign = '\0';
-+			switch (c)
-+			{
-+			case 'd':
-+			case 'x':
-+			case 'X':
-+				val = va_arg(ap, long);
-+				switch (c)
-+				{
-+				case 'd':
-+					if (val < 0)
-+					{
-+						sign = '-';
-+						val = -val;
-+					}
-+					length = _cvt(val, buf, 10, "0123456789");
-+					break;
-+				case 'x':
-+					length = _cvt(val, buf, 16, "0123456789abcdef");
-+					break;
-+				case 'X':
-+					length = _cvt(val, buf, 16, "0123456789ABCDEF");
-+					break;
-+				}
-+				cp = buf;
-+				break;
-+			case 's':
-+				cp = va_arg(ap, char *);
-+				length = strlen(cp);
-+				break;
-+			case 'c':
-+				c = va_arg(ap, long /*char*/);
-+				(*putc)(c);
-+				continue;
-+			default:
-+				(*putc)('?');
-+			}
-+			pad = left_prec - length;
-+			if (sign != '\0')
-+			{
-+				pad--;
-+			}
-+			if (zero_fill)
-+			{
-+				c = '0';
-+				if (sign != '\0')
-+				{
-+					(*putc)(sign);
-+					sign = '\0';
-+				}
-+			} else
-+			{
-+				c = ' ';
-+			}
-+			if (!pad_on_right)
-+			{
-+				while (pad-- > 0)
-+				{
-+					(*putc)(c);
-+				}
-+			}
-+			if (sign != '\0')
-+			{
-+				(*putc)(sign);
-+			}
-+			while (length-- > 0)
-+			{
-+				(*putc)(c = *cp++);
-+				if (c == '\n')
-+				{
-+					(*putc)('\r');
-+				}
-+			}
-+			if (pad_on_right)
-+			{
-+				while (pad-- > 0)
-+				{
-+					(*putc)(c);
-+				}
-+			}
-+		} else
-+		{
-+			(*putc)(c);
-+			if (c == '\n')
-+			{
-+				(*putc)('\r');
-+			}
-+		}
-+	}
-+}
-+
-+int
-+_cvt(unsigned long val, char *buf, long radix, char *digits)
-+{
-+	char temp[80];
-+	char *cp = temp;
-+	int length = 0;
-+	if (val == 0)
-+	{ /* Special case */
-+		*cp++ = '0';
-+	} else
-+		while (val)
-+		{
-+			*cp++ = digits[val % radix];
-+			val /= radix;
-+		}
-+	while (cp != temp)
-+	{
-+		*buf++ = *--cp;
-+		length++;
-+	}
-+	*buf = '\0';
-+	return (length);
-+}
-+
-+void
-+_dump_buf_with_offset(unsigned char *p, int s, unsigned char *base)
-+{
-+	int i, c;
-+	if ((unsigned int)s > (unsigned int)p)
-+	{
-+		s = (unsigned int)s - (unsigned int)p;
-+	}
-+	while (s > 0)
-+	{
-+		if (base)
-+		{
-+			_printk("%06X: ", (int)p - (int)base);
-+		} else
-+		{
-+			_printk("%06X: ", p);
-+		}
-+		for (i = 0;  i < 16;  i++)
-+		{
-+			if (i < s)
-+			{
-+				_printk("%02X", p[i] & 0xFF);
-+			} else
-+			{
-+				_printk("  ");
-+			}
-+			if ((i % 2) == 1) _printk(" ");
-+			if ((i % 8) == 7) _printk(" ");
-+		}
-+		_printk(" |");
-+		for (i = 0;  i < 16;  i++)
-+		{
-+			if (i < s)
-+			{
-+				c = p[i] & 0xFF;
-+				if ((c < 0x20) || (c >= 0x7F)) c = '.';
-+			} else
-+			{
-+				c = ' ';
-+			}
-+			_printk("%c", c);
-+		}
-+		_printk("|\n");
-+		s -= 16;
-+		p += 16;
-+	}
-+}
-+
-+void
-+_dump_buf(unsigned char *p, int s)
-+{
-+	_printk("\n");
-+	_dump_buf_with_offset(p, s, 0);
-+}
-+
-+/*
-+ * Local variables:
-+ *  c-indent-level: 8
-+ *  c-basic-offset: 8
-+ *  tab-width: 8
-+ * End:
-+ */
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/misc-simple.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-simple.c
---- linux-2.6.16.7/arch/mips/boot/compressed/common/misc-simple.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-simple.c	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,122 @@
-+/*
-+ * arch/mips/zboot/common/misc-simple.c
-+ *
-+ * Misc. bootloader code for many machines.  This assumes you have are using
-+ * a 6xx/7xx/74xx CPU in your machine.  This assumes the chunk of memory
-+ * below 8MB is free.  Finally, it assumes you have a NS16550-style uart for 
-+ * your serial console.  If a machine meets these requirements, it can quite
-+ * likely use this code during boot.
-+ * 
-+ * Author: Matt Porter <mporter@mvista.com>
-+ * Derived from arch/ppc/boot/prep/misc.c
-+ *
-+ * Copyright 2001 MontaVista Software Inc.
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/elf.h>
-+#include <linux/config.h>
-+
-+#include <asm/page.h>
-+
-+#include "linux/zlib.h"
-+
-+extern struct NS16550 *com_port;
-+
-+char *avail_ram;
-+char *end_avail;
-+extern char _end[];
-+char *zimage_start;
-+
-+#ifdef CONFIG_CMDLINE
-+#define CMDLINE CONFIG_CMDLINE
-+#else
-+#define CMDLINE ""
-+#endif
-+char cmd_preset[] = CMDLINE;
-+char cmd_buf[256];
-+char *cmd_line = cmd_buf;
-+
-+/* The linker tells us where the image is.
-+*/
-+extern unsigned char __image_begin, __image_end;
-+extern unsigned char __ramdisk_begin, __ramdisk_end;
-+unsigned long initrd_size;
-+
-+extern void puts(const char *);
-+extern void putc(const char c);
-+extern void puthex(unsigned long val);
-+extern void *memcpy(void * __dest, __const void * __src,
-+			    __kernel_size_t __n);
-+extern void gunzip(void *, int, unsigned char *, int *);
-+extern void udelay(long delay);
-+extern int tstc(void);
-+extern int getc(void);
-+extern volatile struct NS16550 *serial_init(int chan);
-+
-+void
-+decompress_kernel(unsigned long load_addr, int num_words, 
-+		unsigned long cksum, unsigned long *sp)
-+{
-+	extern unsigned long start;
-+	int	zimage_size;
-+
-+	com_port = (struct NS16550 *)serial_init(0);
-+
-+	initrd_size = (unsigned long)(&__ramdisk_end) -
-+		(unsigned long)(&__ramdisk_begin);
-+
-+	/*
-+	 * Reveal where we were loaded at and where we
-+	 * were relocated to.
-+	 */
-+	puts("loaded at:     "); puthex(load_addr);
-+	puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); puts("\n");
-+	if ( (unsigned long)load_addr != (unsigned long)&start )
-+	{
-+		puts("relocated to:  "); puthex((unsigned long)&start);
-+		puts(" ");
-+		puthex((unsigned long)((unsigned long)&start + (4*num_words)));
-+		puts("\n");
-+	}
-+
-+	/*
-+	 * We link ourself to an arbitrary low address.  When we run, we
-+	 * relocate outself to that address.  __image_being points to
-+	 * the part of the image where the zImage is. -- Tom
-+	 */
-+	zimage_start = (char *)(unsigned long)(&__image_begin);
-+	zimage_size = (unsigned long)(&__image_end) -
-+			(unsigned long)(&__image_begin);
-+
-+	/*
-+	 * The zImage and initrd will be between start and _end, so they've
-+	 * already been moved once.  We're good to go now. -- Tom
-+	 */
-+	puts("zimage at:     "); puthex((unsigned long)zimage_start);
-+	puts(" "); puthex((unsigned long)(zimage_size+zimage_start));
-+	puts("\n");
-+
-+	if ( initrd_size ) {
-+		puts("initrd at:     ");
-+		puthex((unsigned long)(&__ramdisk_begin));
-+		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
-+	}
-+
-+	/* assume the chunk below 8M is free */
-+	avail_ram = (char *)AVAIL_RAM_START;
-+	end_avail = (char *)AVAIL_RAM_END;
-+
-+	/* Display standard Linux/MIPS boot prompt for kernel args */
-+	puts("Uncompressing Linux at load address ");
-+	puthex(LOADADDR);
-+	puts("\n");
-+	/* I don't like this hard coded gunzip size (fixme) */
-+	gunzip((void *)LOADADDR, 0x400000, zimage_start, &zimage_size);
-+	puts("Now booting the kernel\n");
-+}
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/no_initrd.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/no_initrd.c
---- linux-2.6.16.7/arch/mips/boot/compressed/common/no_initrd.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/no_initrd.c	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,2 @@
-+char initrd_data[1];
-+int initrd_len = 0;
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/images/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/images/Makefile
---- linux-2.6.16.7/arch/mips/boot/compressed/images/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/images/Makefile	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,17 @@
-+
-+#
-+# This dir holds all of the images for MIPS machines.
-+# Tom Rini	January 2001
-+# Pete Popov	2004
-+
-+extra-y		:= vmlinux.bin vmlinux.gz
-+
-+OBJCOPYFLAGS_vmlinux.bin := -O binary
-+$(obj)/vmlinux.bin: vmlinux FORCE
-+	$(call if_changed,objcopy)
-+
-+$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
-+	$(call if_changed,gzip)
-+
-+# Files generated that shall be removed upon make clean
-+clean-files	:= vmlinux* zImage* 
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/nonstdio.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/nonstdio.h
---- linux-2.6.16.7/arch/mips/boot/compressed/include/nonstdio.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/nonstdio.h	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,18 @@
-+/*
-+ * Copyright (C) Paul Mackerras 1997.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+typedef int	FILE;
-+extern FILE *stdin, *stdout;
-+#define NULL	((void *)0)
-+#define EOF	(-1)
-+#define fopen(n, m)	NULL
-+#define fflush(f)	0
-+#define fclose(f)	0
-+extern char *fgets();
-+
-+#define perror(s)	printf("%s: no files!\n", (s))
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/ns16550.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/ns16550.h
---- linux-2.6.16.7/arch/mips/boot/compressed/include/ns16550.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/ns16550.h	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,46 @@
-+/*
-+ * NS16550 Serial Port
-+ */
-+
-+/*
-+ * Figure out which file will have the definitons of COMx
-+ */
-+
-+/* Some machines have their uart registers 16 bytes apart.  Most don't.
-+ * TODO: Make this work like drivers/char/serial does - Tom */
-+#if !defined(UART_REG_PAD)
-+#define UART_REG_PAD(x)
-+#endif
-+
-+struct NS16550
-+ {
-+  unsigned char rbr;  /* 0 */
-+  UART_REG_PAD(rbr)
-+  unsigned char ier;  /* 1 */
-+  UART_REG_PAD(ier)
-+  unsigned char fcr;  /* 2 */
-+  UART_REG_PAD(fcr)
-+  unsigned char lcr;  /* 3 */
-+  UART_REG_PAD(lcr)
-+  unsigned char mcr;  /* 4 */
-+  UART_REG_PAD(mcr)
-+  unsigned char lsr;  /* 5 */
-+  UART_REG_PAD(lsr)
-+  unsigned char msr;  /* 6 */
-+  UART_REG_PAD(msr)
-+  unsigned char scr;  /* 7 */
-+ };
-+
-+#define thr rbr
-+#define iir fcr
-+#define dll rbr
-+#define dlm ier
-+
-+#define LSR_DR   0x01  /* Data ready */
-+#define LSR_OE   0x02  /* Overrun */
-+#define LSR_PE   0x04  /* Parity error */
-+#define LSR_FE   0x08  /* Framing error */
-+#define LSR_BI   0x10  /* Break */
-+#define LSR_THRE 0x20  /* Xmit holding register empty */
-+#define LSR_TEMT 0x40  /* Xmitter empty */
-+#define LSR_ERR  0x80  /* Error */
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/pb1000_serial.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/pb1000_serial.h
---- linux-2.6.16.7/arch/mips/boot/compressed/include/pb1000_serial.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/pb1000_serial.h	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,20 @@
-+/*
-+ * arch/ppc/boot/include/sandpoint_serial.h
-+ * 
-+ * Location of the COM ports on Motorola SPS Sandpoint machines
-+ *
-+ * Author: Mark A. Greer
-+ * 	   mgreer@mvista.com
-+ *
-+ * Copyright 2001 MontaVista Software Inc.
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#define COM1 0xfe0003f8
-+#define COM2 0xfe0002f8
-+#define COM3 0x00000000		/* No COM3 */
-+#define COM4 0x00000000		/* No COM4 */
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/ld.script linux-2.6.16.7.new/arch/mips/boot/compressed/ld.script
---- linux-2.6.16.7/arch/mips/boot/compressed/ld.script	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/ld.script	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,151 @@
-+OUTPUT_ARCH(mips)
-+ENTRY(start)
-+SECTIONS
-+{
-+  /* Read-only sections, merged into text segment: */
-+  /* . = 0x81000000; */
-+  .init          : { *(.init)		} =0
-+  .text      :
-+  {
-+    _ftext = . ;
-+    *(.text)
-+    *(.rodata) *(.rodata.*)
-+    *(.rodata1)
-+    /* .gnu.warning sections are handled specially by elf32.em.  */
-+    *(.gnu.warning)
-+  } =0
-+  .kstrtab : { *(.kstrtab) }
-+
-+  . = ALIGN(16);		/* Exception table */
-+  __start___ex_table = .;
-+  __ex_table : { *(__ex_table) }
-+  __stop___ex_table = .;
-+
-+  __start___dbe_table = .;	/* Exception table for data bus errors */
-+  __dbe_table : { *(__dbe_table) }
-+  __stop___dbe_table = .;
-+
-+  __start___ksymtab = .;	/* Kernel symbol table */
-+  __ksymtab : { *(__ksymtab) }
-+  __stop___ksymtab = .;
-+
-+  _etext = .;
-+
-+  . = ALIGN(8192);
-+  .data.init_task : { *(.data.init_task) }
-+
-+  /* Startup code */
-+  . = ALIGN(4096);
-+  __init_begin = .;
-+  .text.init : { *(.text.init) }
-+  .data.init : { *(.data.init) }
-+  . = ALIGN(16);
-+  __setup_start = .;
-+  .setup.init : { *(.setup.init) }
-+  __setup_end = .;
-+  __initcall_start = .;
-+  .initcall.init : { *(.initcall.init) }
-+  __initcall_end = .;
-+  . = ALIGN(4096);	/* Align double page for init_task_union */
-+  __init_end = .;
-+
-+  . = ALIGN(4096);
-+  .data.page_aligned : { *(.data.idt) }
-+
-+  . = ALIGN(32);
-+  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-+
-+  .fini      : { *(.fini)    } =0
-+  .reginfo : { *(.reginfo) }
-+  /* Adjust the address for the data segment.  We want to adjust up to
-+     the same address within the page on the next page up.  It would
-+     be more correct to do this:
-+       . = .;
-+     The current expression does not correctly handle the case of a
-+     text segment ending precisely at the end of a page; it causes the
-+     data segment to skip a page.  The above expression does not have
-+     this problem, but it will currently (2/95) cause BFD to allocate
-+     a single segment, combining both text and data, for this case.
-+     This will prevent the text segment from being shared among
-+     multiple executions of the program; I think that is more
-+     important than losing a page of the virtual address space (note
-+     that no actual memory is lost; the page which is skipped can not
-+     be referenced).  */
-+  . = .;
-+  .data    :
-+  {
-+    _fdata = . ;
-+    *(.data)
-+
-+   /* Put the compressed image here, so bss is on the end. */
-+   __image_begin = .;
-+   *(.image)
-+   __image_end = .;
-+   /* Align the initial ramdisk image (INITRD) on page boundaries. */
-+   . = ALIGN(4096);
-+   __ramdisk_begin = .;
-+   *(.initrd)
-+   __ramdisk_end = .;
-+   . = ALIGN(4096);
-+
-+    CONSTRUCTORS
-+  }
-+  .data1   : { *(.data1) }
-+  _gp = . + 0x8000;
-+  .lit8 : { *(.lit8) }
-+  .lit4 : { *(.lit4) }
-+  .ctors         : { *(.ctors)   }
-+  .dtors         : { *(.dtors)   }
-+  .got           : { *(.got.plt) *(.got) }
-+  .dynamic       : { *(.dynamic) }
-+  /* We want the small data sections together, so single-instruction offsets
-+     can access them all, and initialized data all before uninitialized, so
-+     we can shorten the on-disk segment size.  */
-+  .sdata     : { *(.sdata) }
-+  . = ALIGN(4);
-+  _edata  =  .;
-+  PROVIDE (edata = .);
-+
-+  __bss_start = .;
-+  _fbss = .;
-+  .sbss      : { *(.sbss) *(.scommon) }
-+  .bss       :
-+  {
-+   *(.dynbss)
-+   *(.bss)
-+   *(COMMON)
-+   .  = ALIGN(4);
-+  _end = . ;
-+  PROVIDE (end = .);
-+  }
-+
-+  /* Sections to be discarded */
-+  /DISCARD/ :
-+  {
-+        *(.text.exit)
-+        *(.data.exit)
-+        *(.exitcall.exit)
-+  }
-+
-+  /* This is the MIPS specific mdebug section.  */
-+  .mdebug : { *(.mdebug) }
-+  /* These are needed for ELF backends which have not yet been
-+     converted to the new style linker.  */
-+  .stab 0 : { *(.stab) }
-+  .stabstr 0 : { *(.stabstr) }
-+  /* DWARF debug sections.
-+     Symbols in the .debug DWARF section are relative to the beginning of the
-+     section so we begin .debug at 0.  It's not clear yet what needs to happen
-+     for the others.   */
-+  .debug          0 : { *(.debug) }
-+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-+  .debug_aranges  0 : { *(.debug_aranges) }
-+  .debug_pubnames 0 : { *(.debug_pubnames) }
-+  .debug_sfnames  0 : { *(.debug_sfnames) }
-+  .line           0 : { *(.line) }
-+  /* These must appear regardless of  .  */
-+  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-+  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-+  .comment : { *(.comment) }
-+  .note : { *(.note) }
-+}
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/lib/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/lib/Makefile
---- linux-2.6.16.7/arch/mips/boot/compressed/lib/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/lib/Makefile	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,11 @@
-+
-+#
-+# Makefile for some libs needed by zImage.
-+#
-+
-+lib-y := $(addprefix ../../../../../lib/zlib_inflate/, \
-+	infblock.o infcodes.o inffast.o inflate.o inftrees.o infutil.o) \
-+	$(addprefix ../../../../../lib/, ctype.o string.o) \
-+	$(addprefix ../../../../../arch/mips/lib/, memcpy.o) \
-+
-+
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/Makefile
---- linux-2.6.16.7/arch/mips/boot/compressed/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/Makefile	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,32 @@
-+
-+#
-+# arch/mips/boot/compressed/Makefile
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License.  See the file "COPYING" in the main directory of this archive
-+# for more details.
-+#
-+# Copyright (C) 1994 by Linus Torvalds
-+# Adapted for PowerPC by Gary Thomas
-+# modified by Cort (cort@cs.nmt.edu)
-+#
-+# Ported to MIPS by Pete Popov, ppopov@embeddedalley.com
-+#
-+
-+boot		:= arch/mips/boot
-+compressed	:= arch/mips/boot/compressed
-+
-+CFLAGS	 	+= -fno-builtin -D__BOOTER__ -I$(compressed)/include
-+
-+BOOT_TARGETS	= zImage zImage.flash
-+
-+bootdir-$(CONFIG_SOC_AU1X00)	:= au1xxx
-+subdir-y			:= common lib images
-+
-+.PHONY: $(BOOT_TARGETS) $(bootdir-y)
-+
-+$(BOOT_TARGETS): $(bootdir-y)
-+
-+$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
-+		$(addprefix $(obj)/,$(hostprogs-y))
-+	$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/entry linux-2.6.16.7.new/arch/mips/boot/compressed/utils/entry
---- linux-2.6.16.7/arch/mips/boot/compressed/utils/entry	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/entry	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,12 @@
-+#!/bin/sh
-+
-+# grab the kernel_entry address from the vmlinux elf image
-+entry=`$1 $2  | grep kernel_entry`
-+
-+fs=`echo $entry | grep ffffffff`  # check toolchain output
-+
-+if [ -n "$fs" ]; then
-+	echo "0x"`$1 $2  | grep kernel_entry | cut -c9- | awk '{print $1}'`
-+else
-+	echo "0x"`$1 $2  | grep kernel_entry | cut -c1- | awk '{print $1}'`
-+fi
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/offset linux-2.6.16.7.new/arch/mips/boot/compressed/utils/offset
---- linux-2.6.16.7/arch/mips/boot/compressed/utils/offset	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/offset	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,3 @@
-+#!/bin/sh
-+
-+echo "0x"`$1 -h $2  | grep $3 | grep -v zvmlinux| awk '{print $6}'`
-diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/size linux-2.6.16.7.new/arch/mips/boot/compressed/utils/size
---- linux-2.6.16.7/arch/mips/boot/compressed/utils/size	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/size	2006-05-04 23:08:18.000000000 +0200
-@@ -0,0 +1,4 @@
-+#!/bin/sh
-+
-+OFFSET=`$1 -h $2  | grep $3 | grep -v zvmlinux | awk '{print $3}'`
-+echo "0x"$OFFSET
-diff -urN linux-2.6.16.7/arch/mips/boot/Makefile linux-2.6.16.7.new/arch/mips/boot/Makefile
---- linux-2.6.16.7/arch/mips/boot/Makefile	2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7.new/arch/mips/boot/Makefile	2006-05-04 23:08:18.000000000 +0200
-@@ -16,6 +16,7 @@
-   E2EFLAGS =
- endif
- 
-+
- #
- # Drop some uninteresting sections in the kernel.
- # This is only relevant for ELF kernels but doesn't hurt a.out
-@@ -25,7 +26,10 @@
- 
- VMLINUX = vmlinux
- 
--all: vmlinux.ecoff vmlinux.srec addinitrd
-+ZBOOT_TARGETS	= zImage zImage.flash
-+bootdir-y	:= compressed
-+
-+all: vmlinux.ecoff vmlinux.srec addinitrd zImage
- 
- vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
- 	$(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
-@@ -51,3 +55,11 @@
- 	       vmlinux.bin \
- 	       vmlinux.ecoff \
- 	       vmlinux.srec
-+ 
-+.PHONY: $(ZBOOT_TARGETS) $(bootdir-y)
-+ 
-+$(ZBOOT_TARGETS): $(bootdir-y)
-+
-+$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
-+		$(addprefix $(obj)/,$(hostprogs-y))
-+	$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
-diff -urN linux-2.6.16.7/arch/mips/Makefile linux-2.6.16.7.new/arch/mips/Makefile
---- linux-2.6.16.7/arch/mips/Makefile	2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7.new/arch/mips/Makefile	2006-05-04 23:09:44.000000000 +0200
-@@ -831,6 +831,10 @@
- all:	vmlinux.ecoff
- endif
- 
-+ifdef CONFIG_MIPS_MTX1
-+all:    vmlinux.srec zImage zImage.flash
-+endif
-+
- vmlinux.bin: $(vmlinux-32)
- 	+@$(call makeboot,$@)
- 
-@@ -840,6 +844,12 @@
- vmlinux.srec: $(vmlinux-32)
- 	+@$(call makeboot,$@)
- 
-+zImage: vmlinux
-+	+@$(call makeboot,$@)
-+
-+zImage.flash: vmlinux
-+	+@$(call makeboot,$@)
-+
- CLEAN_FILES += vmlinux.ecoff \
- 	       vmlinux.srec \
- 	       vmlinux.rm200.tmp \
-@@ -848,6 +858,7 @@
- archclean:
- 	@$(MAKE) $(clean)=arch/mips/boot
- 	@$(MAKE) $(clean)=arch/mips/lasat
-+	@$(MAKE) $(clean)=arch/mips/boot/compressed
- 
- CLEAN_FILES += vmlinux.32 \
- 	       vmlinux.64 \
diff --git a/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch b/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch
deleted file mode 100644
index c7e329b295..0000000000
--- a/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch
+++ /dev/null
@@ -1,279 +0,0 @@
-diff -urN linux-2.6.16.7/drivers/char/watchdog/Kconfig linux-2.6.16.7.new/drivers/char/watchdog/Kconfig
---- linux-2.6.16.7/drivers/char/watchdog/Kconfig	2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7.new/drivers/char/watchdog/Kconfig	2006-04-22 23:23:53.000000000 +0200
-@@ -460,6 +460,14 @@
- 	  timer expired and no process has written to /dev/watchdog during
- 	  that time.
- 
-+config MTX1_WATCHDOG
-+	tristate "MTX-1 Hardware Watchdog"
-+	depends on WATCHDOG && MIPS_MTX1
-+	help
-+	  Hardware driver for the AccessCube MTX-1 watchdog. This is a
-+	  watchdog timer that will reboot the machine after a 100 seconds
-+	  timer expired.
-+
- # S390 Architecture
- 
- config ZVM_WATCHDOG
-diff -urN linux-2.6.16.7/drivers/char/watchdog/Makefile linux-2.6.16.7.new/drivers/char/watchdog/Makefile
---- linux-2.6.16.7/drivers/char/watchdog/Makefile	2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7.new/drivers/char/watchdog/Makefile	2006-04-22 23:21:18.000000000 +0200
-@@ -65,6 +65,7 @@
- 
- # MIPS Architecture
- obj-$(CONFIG_INDYDOG) += indydog.o
-+obj-$(CONFIG_MTX1_WATCHDOG) += mtx-1_watchdog.o
- 
- # S390 Architecture
- 
-diff -urN linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c
---- linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c	2006-04-22 23:20:53.000000000 +0200
-@@ -0,0 +1,246 @@
-+/*
-+ *      Driver for the MTX-1 Watchdog.
-+ *
-+ *      (c) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved.
-+ *                              http://www.4g-systems.biz
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ *      Neither Michael Stickel nor 4G Systems admit liability nor provide
-+ *      warranty for any of this software. This material is provided
-+ *      "AS-IS" and at no charge.
-+ *
-+ *      (c) Copyright 2005    4G Systems <info@4g-systems.biz>
-+ *
-+ *      Release 0.01.
-+ *
-+ *      Author: Michael Stickel  michael.stickel@4g-systems.biz
-+ *
-+ *
-+ *      The Watchdog is configured to reset the MTX-1
-+ *      if it is not triggered for 100 seconds.
-+ *      It should not be triggered more often than 1.6 seconds.
-+ *
-+ *      A timer triggers the watchdog every 5 seconds, until
-+ *      it is opened for the first time. After the first open
-+ *      it MUST be triggered every 2..95 seconds.
-+ */
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <linux/fs.h>
-+
-+#include <asm/mach-au1x00/au1000.h>
-+
-+#ifndef FALSE
-+# define FALSE (0)
-+#endif
-+
-+#ifndef TRUE
-+# define TRUE (!FALSE)
-+#endif
-+
-+
-+//---------[ Hardware Functions ]-----------------
-+
-+static void mtx1_trigger_wd (void)
-+{
-+	/*
-+	 * toggle GPIO2_15
-+	 */
-+
-+	u32 tmp = au_readl(GPIO2_DIR);
-+	tmp = (tmp & ~(1<<15)) | ((~tmp) & (1<<15));
-+	au_writel (tmp, GPIO2_DIR);
-+}
-+
-+static void mtx1_enable_wd (void)
-+{
-+	au_writel (au_readl(GPIO2_DIR) | (u32)(1<<15), GPIO2_DIR);
-+}
-+
-+static void mtx1_disable_wd (void)
-+{
-+	au_writel (au_readl(GPIO2_DIR) & ~((u32)(1<<15)), GPIO2_DIR);
-+}
-+
-+
-+//---------[ Timer Functions ]-----------------
-+
-+static struct timer_list   wd_trigger_timer;
-+static char                timer_is_running = FALSE;
-+
-+static void wd_timer_callback (unsigned long data)
-+{
-+	if (timer_is_running)
-+		mod_timer (&wd_trigger_timer, jiffies + 5 * HZ);
-+	mtx1_trigger_wd();
-+}
-+
-+static void start_wd_timer (void)
-+{
-+	if (!timer_is_running) {
-+		struct timer_list *t = &wd_trigger_timer;
-+		
-+		init_timer (t);
-+		t->function = wd_timer_callback;
-+		t->data     = (unsigned long)0L;
-+		t->expires  = jiffies + 5 * HZ;   // 5 seconds.
-+		add_timer (t);
-+		timer_is_running = TRUE;
-+	}
-+}
-+
-+
-+
-+static void stop_wd_timer (void)
-+{
-+	if (timer_is_running) {
-+		del_timer(&wd_trigger_timer);
-+		timer_is_running = FALSE;
-+	}
-+}
-+
-+
-+//---------[ File Functions ]-----------------
-+
-+static char restart_after_close;
-+
-+static int mtx1wd_open (struct inode *inode, struct file *file)
-+{
-+	if (MINOR(inode->i_rdev) != WATCHDOG_MINOR) return -ENODEV;
-+	//MOD_INC_USE_COUNT;
-+
-+	// stop the timer, if it is running. It will not be
-+	// started again, until the module is loaded again.
-+	stop_wd_timer();
-+
-+	// sleep for 2 seconds, to ensure, that the wd is
-+	// not triggered more often than every 2 seconds.
-+	schedule_timeout (2 * HZ);
-+
-+	return 0;
-+}
-+
-+
-+static int mtx1wd_release (struct inode *inode, struct file *file) {
-+	if (MINOR(inode->i_rdev)==WATCHDOG_MINOR) {
-+	}
-+	if (restart_after_close)
-+		start_wd_timer();
-+	//MOD_DEC_USE_COUNT;
-+	return 0;
-+}
-+
-+
-+static ssize_t mtx1wd_write (struct file *file, const char *buf, size_t count, loff_t *ppos) {
-+
-+	mtx1_trigger_wd ();
-+
-+	if (count > 0) {
-+               char buffer[10];
-+               int n = (count>9)?9:count;
-+
-+               if (copy_from_user (&buffer, buf, n))
-+                       return -EFAULT;
-+               buffer[n]=0;
-+
-+               if (count >= 4 && strncmp("auto", buffer, 4)==0)
-+                       restart_after_close = 1;
-+
-+               else if (count >= 6 && strncmp("manual", buffer, 6)==0)
-+                       restart_after_close = 0;
-+
-+               return n;
-+	}
-+
-+	return 0;
-+}
-+
-+static ssize_t mtx1wd_read (struct file *file, char *buf, size_t count, loff_t *ppos)
-+{
-+       char * state = restart_after_close ? "auto\n" : "manual\n";
-+       int n = strlen(state)+1;
-+
-+       if (file->f_pos >= n)
-+               return 0;
-+
-+       if (count < n)
-+               return -EINVAL;
-+
-+       if(copy_to_user(buf, state, n))
-+               return -EFAULT;
-+
-+       file->f_pos += n;
-+
-+       return n;
-+}
-+
-+static struct file_operations mtx1wd_fops = {
-+	.owner = THIS_MODULE,
-+	.read = mtx1wd_read,
-+	.write = mtx1wd_write,
-+	.open = mtx1wd_open,
-+	.release = mtx1wd_release
-+};
-+
-+
-+static struct miscdevice mtx1wd_miscdev = {
-+	WATCHDOG_MINOR,
-+	"watchdog",
-+	&mtx1wd_fops
-+};
-+
-+
-+
-+//---------[ Module Functions ]-----------------
-+
-+
-+static int __init init_mtx1_watchdog(void)
-+{
-+	printk("MTX-1 watchdog driver\n");
-+
-+	misc_register(&mtx1wd_miscdev);
-+	
-+	restart_after_close = 0;
-+
-+	mtx1_enable_wd ();
-+
-+	//-- trigger it for the first time.
-+	//-- We do not exactly know how long it has not been triggered.
-+	mtx1_trigger_wd ();
-+
-+	// start a timer, that calls mtx1_trigger_wd every 5 seconds.
-+	start_wd_timer();
-+
-+	return 0;
-+}
-+
-+static void __exit exit_mtx1_watchdog(void) {
-+
-+	// stop the timer, if it is running.
-+        stop_wd_timer();
-+
-+        misc_deregister(&mtx1wd_miscdev);
-+
-+        mtx1_disable_wd();
-+}
-+
-+module_init(init_mtx1_watchdog);
-+module_exit(exit_mtx1_watchdog);
-+
-+MODULE_AUTHOR("Michael Stickel");
-+MODULE_DESCRIPTION("Driver for the MTX-1 watchdog");
-+MODULE_LICENSE("GPL");
diff --git a/openwrt/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch b/openwrt/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch
deleted file mode 100644
index 946bd84540..0000000000
--- a/openwrt/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-diff -urN linux-2.6.16.7/drivers/net/au1000_eth.c linux-2.6.16.7.new/drivers/net/au1000_eth.c
---- linux-2.6.16.7/drivers/net/au1000_eth.c	2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7.new/drivers/net/au1000_eth.c	2006-04-23 01:42:48.000000000 +0200
-@@ -12,6 +12,9 @@
-  * Author: MontaVista Software, Inc.
-  *         	ppopov@mvista.com or source@mvista.com
-  *
-+ *         Bjoern Riemer 2004
-+ *           riemer@fokus.fraunhofer.de or riemer@riemer-nt.de
-+ *             // fixed the link beat detection with ioctls (SIOCGMIIPHY)
-  * ########################################################################
-  *
-  *  This program is free software; you can distribute it and/or modify it
-@@ -1672,6 +1675,10 @@
- 	aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed);
- 	control = MAC_DISABLE_RX_OWN | MAC_RX_ENABLE | MAC_TX_ENABLE;
- #ifndef CONFIG_CPU_LITTLE_ENDIAN
-+	/*riemer: fix for startup without cable */
-+	if (!link)
-+		dev->flags &= ~IFF_RUNNING;
-+
- 	control |= MAC_BIG_ENDIAN;
- #endif
- 	if (link && (dev->if_port == IF_PORT_100BASEFX)) {
diff --git a/openwrt/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch b/openwrt/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch
deleted file mode 100644
index 511df2c8da..0000000000
--- a/openwrt/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch
+++ /dev/null
@@ -1,241 +0,0 @@
-diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c
---- linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c	2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c	2006-04-23 11:54:31.000000000 +0200
-@@ -64,6 +64,7 @@
-        { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
-        { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
-        { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-+       { AU1500_GPIO_207, INTC_INT_RISE_AND_FALL_EDGE, 0 },
- };
- 
- int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
-diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile
---- linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile	2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile	2006-04-23 14:01:36.000000000 +0200
-@@ -8,3 +8,4 @@
- #
- 
- lib-y := init.o board_setup.o irqmap.o
-+obj-y := mtx-1_sysbtn.o
-diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c
---- linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c	2006-04-23 14:01:17.000000000 +0200
-@@ -0,0 +1,218 @@
-+/*
-+ *      Driver for the MTX-1 System Button.
-+ *
-+ *      (c) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved.
-+ *                              http://www.4g-systems.biz
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ *      Neither Michael Stickel nor 4G Systeme GmbH admit liability nor provide
-+ *      warranty for any of this software. This material is provided
-+ *      "AS-IS" and at no charge.
-+ *
-+ *      (c) Copyright 2005    4G Systems <info@4g-systems.biz>
-+ *
-+ *      Release 0.01.
-+ *
-+ *      Author: Michael Stickel  michael.stickel@4g-systems.biz
-+ *
-+ *
-+ *      After the module is loaded there is a device /dev/misc/btn
-+ *      that can be read. It returns one char '1' if the button
-+ *      has been pressed an '0' if it has been released.
-+ */
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/kernel.h>
-+#include <linux/poll.h>
-+#include <linux/sched.h>
-+#include <linux/miscdevice.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/uaccess.h>
-+
-+#include <asm/mach-au1x00/au1000.h>
-+
-+
-+#ifndef FALSE
-+# define FALSE (0)
-+#endif
-+
-+#ifndef TRUE
-+# define TRUE (!FALSE)
-+#endif
-+
-+
-+//---------[ declarations ]-----------------
-+
-+
-+static DECLARE_WAIT_QUEUE_HEAD(mtx1btn_wait_queue);
-+static char state_changed;
-+static char last_value;
-+static char is_inuse;
-+
-+
-+//---------[ Hardware Functions ]-----------------
-+
-+// The MTX-1 Button is attached to GPIO207.
-+#define MTX1_GPIO2_SYSBTN (7)
-+#define MTX1_SYSBTN_IRQ   (AU1500_GPIO_207)
-+
-+
-+static char mtx1_getbtn (int btnno)
-+{
-+  if (btnno==0) {
-+    return (au_readl(GPIO2_PINSTATE) & (1<<MTX1_GPIO2_SYSBTN)) ? 0 : 1;
-+  }
-+  return 0;
-+}
-+
-+static void mtx1_initbuttons (void)
-+{
-+  au_writel (au_readl(GPIO2_DIR) & ~(1<<MTX1_GPIO2_SYSBTN), GPIO2_DIR);
-+}
-+
-+
-+//---------[ Interrupt handling ]-----------------
-+
-+
-+static void mtx1_btn_interrupt (int irq, void *private, struct pt_regs *regs)
-+{
-+	char value = mtx1_getbtn(0);
-+	if (last_value != value)
-+	{
-+		last_value = value;
-+		state_changed = 1;
-+		wake_up (&mtx1btn_wait_queue);
-+	}
-+//	kill_fasync(&async_queue, SIGIO, POLL_OUT);
-+}
-+
-+
-+static int mtx1_btn_startirq (void)
-+{
-+	if (!request_irq (MTX1_SYSBTN_IRQ, mtx1_btn_interrupt, 0 /* | SA_INTERRUPT */, "mtx1btn", (void *)&state_changed)) {
-+		return 0;
-+    }
-+	return -1;
-+}
-+
-+static int mtx1_btn_stopirq  (void)
-+{
-+	free_irq(MTX1_SYSBTN_IRQ, (void *)&state_changed);
-+	return 0;
-+}
-+
-+
-+
-+//---------[ File Functions ]-----------------
-+
-+
-+static int mtx1sysbtn_minor = -1;
-+
-+
-+static int mtx1sysbtn_open (struct inode *inode, struct file *file)
-+{
-+	if (MINOR(inode->i_rdev)!=mtx1sysbtn_minor) return -ENODEV;
-+	if (is_inuse) return -EBUSY;
-+	is_inuse=1;
-+	last_value = mtx1_getbtn(0);
-+	state_changed = 0;
-+	return 0;
-+}
-+
-+
-+static int mtx1sysbtn_release (struct inode *inode, struct file *file) {
-+	if (MINOR(inode->i_rdev)==mtx1sysbtn_minor) {
-+		is_inuse=0;
-+	}
-+	return 0;
-+}
-+
-+
-+static ssize_t mtx1sysbtn_read (struct file *file, char *buf, size_t count, loff_t *ppos)
-+{
-+	if (count < 1)
-+		return -EINVAL;
-+	if (!state_changed)
-+		interruptible_sleep_on (&mtx1btn_wait_queue);
-+	state_changed = 0;
-+	char c = last_value ? '1' : '0'; /* mtx1_getbtn(0) */
-+	if(copy_to_user(buf, &c, 1))
-+		return -EFAULT;
-+	return 1;
-+}
-+
-+
-+static unsigned int mtx1sysbtn_poll (struct file *file, poll_table * wait)
-+{
-+  unsigned int mask = 0;
-+
-+  poll_wait (file, &mtx1btn_wait_queue, wait);
-+
-+  if (state_changed) // state changed since last time.
-+    mask |= POLLIN | POLLRDNORM;
-+
-+  return mask;
-+}
-+
-+
-+static struct file_operations mtx1sysbtn_fops = {
-+	.owner = THIS_MODULE,
-+	.read = mtx1sysbtn_read,
-+	.poll = mtx1sysbtn_poll,
-+	.open = mtx1sysbtn_open,
-+	.release = mtx1sysbtn_release
-+};
-+
-+
-+static struct miscdevice mtx1sysbtn_miscdev = {
-+	MISC_DYNAMIC_MINOR /* SYSBTN_MINOR */ ,
-+	"btn",
-+	&mtx1sysbtn_fops
-+};
-+
-+
-+
-+//---------[ Module Functions ]-----------------
-+
-+
-+void __exit exit_mtx1_sysbtn (void)
-+{
-+	is_inuse = 1;
-+	mtx1_btn_stopirq ();
-+	misc_deregister(&mtx1sysbtn_miscdev);
-+}
-+
-+
-+static int __init init_mtx1_sysbtn (void)
-+{
-+	printk("MTX-1 System Button driver\n");
-+	is_inuse = 1;
-+	mtx1_initbuttons ();
-+	if (misc_register (&mtx1sysbtn_miscdev) >= 0) {
-+		mtx1sysbtn_minor = mtx1sysbtn_miscdev.minor;
-+		if (mtx1_btn_startirq () == 0) {
-+			is_inuse=0;
-+			return 0;
-+		}
-+		misc_deregister(&mtx1sysbtn_miscdev);
-+	}
-+	return 1;
-+}
-+
-+module_init(init_mtx1_sysbtn);
-+module_exit(exit_mtx1_sysbtn);
-+
-+MODULE_AUTHOR("Michael Stickel");
-+MODULE_DESCRIPTION("Driver for the MTX-1 system button");
-+MODULE_LICENSE("GPL");
diff --git a/openwrt/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch b/openwrt/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch
deleted file mode 100644
index 34d1005347..0000000000
--- a/openwrt/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- linux-2.6.16.7/arch/mips/au1000/mtx-1/board_setup.c	2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/board_setup.c	2006-04-23 14:35:42.000000000 +0200
-@@ -71,9 +71,7 @@
- #endif
- 
- 	// initialize sys_pinfunc:
--	// disable second ethernet port (SYS_PF_NI2)
--	// set U3/GPIO23 to GPIO23 (SYS_PF_U3)
--	au_writel( SYS_PF_NI2 | SYS_PF_U3, SYS_PINFUNC );
-+	au_writel( SYS_PF_NI2, SYS_PINFUNC );
- 
- 	// initialize GPIO
- 	au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR );
diff --git a/openwrt/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch b/openwrt/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch
deleted file mode 100644
index 9e54ac1c59..0000000000
--- a/openwrt/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/board_setup.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/board_setup.c
---- linux-2.6.16.7/arch/mips/au1000/mtx-1/board_setup.c	2006-04-23 14:39:21.000000000 +0200
-+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/board_setup.c	2006-04-23 14:39:03.000000000 +0200
-@@ -44,6 +44,9 @@
- #include <asm/pgtable.h>
- #include <asm/mach-au1x00/au1000.h>
- 
-+extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-+int    mtx1_pci_idsel(unsigned int devsel, int assert);
-+
- void board_reset (void)
- {
- 	/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
-@@ -77,11 +80,37 @@
- 	au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR );
- 	au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF
- 	au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF
-+	au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
- 	au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF
- 
- 	// enable LED and set it to green
- 	au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR );
- 	au_writel( 0x18000800, GPIO2_OUTPUT );
- 
-+	board_pci_idsel = mtx1_pci_idsel;
-+
- 	printk("4G Systems MTX-1 Board\n");
- }
-+
-+int
-+mtx1_pci_idsel(unsigned int devsel, int assert)
-+{
-+#define MTX_IDSEL_ONLY_0_AND_3 0
-+#if MTX_IDSEL_ONLY_0_AND_3
-+       if (devsel != 0 && devsel != 3) {
-+               printk("*** not 0 or 3\n");
-+               return 0;
-+       }
-+#endif
-+
-+       if (assert && devsel != 0) {
-+               // supress signal to cardbus
-+               au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
-+       }
-+       else {
-+               au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
-+       }
-+       au_sync_udelay(1);
-+       return 1;
-+}
-+
-diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c
---- linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c	2006-04-23 14:40:54.000000000 +0200
-+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c	2006-04-23 14:40:12.000000000 +0200
-@@ -48,7 +48,7 @@
- #include <asm/mach-au1x00/au1000.h>
- 
- char irq_tab_alchemy[][5] __initdata = {
-- [0] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 00 - AdapterA-Slot0 (top)    */
-+ [0] = { -1, INTA, INTA, INTX, INTX},   /* IDSEL 00 - AdapterA-Slot0 (top)    */
-  [1] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 01 - AdapterA-Slot1 (bottom) */
-  [2] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 02 - AdapterB-Slot0 (top)    */
-  [3] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 03 - AdapterB-Slot1 (bottom) */
diff --git a/openwrt/target/linux/au1000-2.6/patches/009-boot.patch b/openwrt/target/linux/au1000-2.6/patches/009-boot.patch
deleted file mode 100644
index 611c70d460..0000000000
--- a/openwrt/target/linux/au1000-2.6/patches/009-boot.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-diff -Nur linux-cvs/arch/mips/kernel/head.S linux-aruba/arch/mips/kernel/head.S
---- linux-cvs/arch/mips/kernel/head.S	2004-12-23 00:21:39.000000000 -0800
-+++ linux-aruba/arch/mips/kernel/head.S	2005-10-20 09:16:08.000000000 -0700
-@@ -122,6 +122,10 @@
- #endif
- 	.endm
- 
-+
-+	j kernel_entry
-+	nop
-+
- 	/*
- 	 * Reserved space for exception handlers.
- 	 * Necessary for machines which link their kernels at KSEG0.
-
diff --git a/openwrt/target/linux/brcm-2.4/Config.in b/openwrt/target/linux/brcm-2.4/Config.in
deleted file mode 100644
index 37fb6825d8..0000000000
--- a/openwrt/target/linux/brcm-2.4/Config.in
+++ /dev/null
@@ -1,8 +0,0 @@
-config BR2_PACKAGE_KMOD_BRCM_WL
-	prompt "kmod-brcm-wl...................... Broadcom Wireless Network Driver"
-	tristate
-	depends BR2_LINUX_2_4_BRCM
-	default y
-	help
-	  Proprietary driver for Broadcom Wireless chipsets
-
diff --git a/openwrt/target/linux/brcm-2.4/Makefile b/openwrt/target/linux/brcm-2.4/Makefile
deleted file mode 100644
index b623aeab3e..0000000000
--- a/openwrt/target/linux/brcm-2.4/Makefile
+++ /dev/null
@@ -1,66 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-LINUX_VERSION:=2.4.32
-LINUX_RELEASE:=1
-LINUX_KERNEL_MD5SUM:=38f4d0830e95a20f4bfed17622d5557c
-
-include ../rules.mk
-include ./config
-
-# broadcom specific kmod packages
-$(eval $(call KMOD_template,BRCM_WL,brcm-wl,\
-	$(MODULES_DIR)/kernel/drivers/net/wl/wl.o \
-,CONFIG_WL,,20,wl))
-
-$(eval $(call KMOD_template,LP,lp,\
-	$(MODULES_DIR)/kernel/drivers/parport/parport.o \
-	$(MODULES_DIR)/kernel/drivers/parport/parport_splink.o \
-	$(MODULES_DIR)/kernel/drivers/char/lp.o \
-	$(MODULES_DIR)/kernel/drivers/char/ppdev.o \
-,CONFIG_PARPORT,,50,parport parport_splink lp))
-
-include ../generic-$(KERNEL)/modules.mk
-include ../kernel.mk
-
-
-$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
-	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
-	@$(CP) config $(LINUX_DIR)/.config
-	touch $@
-
-
-###############################################
-# Proprietary driver for BCM43xx
-###############################################
-
-LINUX_BINARY_DRIVER_SITE=http://downloads.openwrt.org/sources
-# proprietary driver, extracted from Linksys GPL sourcetree WRT54GS 4.70.6
-LINUX_BINARY_WL_DRIVER=kernel-binary-wl-0.7.tar.gz
-LINUX_BINARY_WL_MD5SUM=ff50130914790cbae9b73a13513da5ee
-
-$(DL_DIR)/$(LINUX_BINARY_WL_DRIVER):
-	$(SCRIPT_DIR)/download.pl $(DL_DIR) $(LINUX_BINARY_WL_DRIVER) $(LINUX_BINARY_WL_MD5SUM) $(LINUX_BINARY_DRIVER_SITE) $(MAKE_TRACE)
-	
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_BINARY_WL_DRIVER)
-$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.drivers-unpacked
-$(LINUX_DIR)/.modules_done: $(LINUX_DIR)/.drivers-unpacked
-$(STAMP_DIR)/.linux-compile: $(LINUX_DIR)/.drivers-installed
-
-$(LINUX_DIR)/.drivers-unpacked: $(LINUX_DIR)/.unpacked
-	-mkdir -p $(BUILD_DIR)
-	zcat $(DL_DIR)/$(LINUX_BINARY_WL_DRIVER) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-	# copy binary wlan driver
-	mkdir -p $(LINUX_DIR)/drivers/net/wl
-	$(CP) $(BUILD_DIR)/kernel-binary-wl/*.o $(LINUX_DIR)/drivers/net/wl
-	touch $@
-
-$(LINUX_DIR)/.drivers-installed: $(LINUX_DIR)/.modules_done
-	mkdir -p $(LINUX_BUILD_DIR)/modules/lib/modules/2.4.32/kernel/drivers/net/wl
-	@-[ -f $(LINUX_BUILD_DIR)/modules/lib/modules/2.4.32/kernel/drivers/net/wl/wl.o ] || $(CP) $(LINUX_DIR)/drivers/net/wl/wl.o $(LINUX_BUILD_DIR)/modules/lib/modules/2.4.32/kernel/drivers/net/wl/
-	touch $@
-
-linux-dirclean: drivers-clean
-
-drivers-clean:
-	rm -rf $(BUILD_DIR)/kernel-binary-wl
diff --git a/openwrt/target/linux/brcm-2.4/config b/openwrt/target/linux/brcm-2.4/config
deleted file mode 100644
index c4cf5340ea..0000000000
--- a/openwrt/target/linux/brcm-2.4/config
+++ /dev/null
@@ -1,1388 +0,0 @@
-#
-# Automatically generated by make menuconfig: don't edit
-#
-CONFIG_MIPS=y
-CONFIG_MIPS32=y
-# CONFIG_MIPS64 is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_KMOD is not set
-
-#
-# Machine selection
-#
-# CONFIG_ACER_PICA_61 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_FICMMP is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_COGENT_CSB250 is not set
-# CONFIG_BAGET_MIPS is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_HP_LASERJET is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MAGNUM_4000 is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_BIG_SUR is not set
-# CONFIG_PMC_STRETCH is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
-# CONFIG_NEC_EAGLE is not set
-# CONFIG_OLIVETTI_M700 is not set
-# CONFIG_NINO is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-CONFIG_MIPS_BRCM=y
-CONFIG_BCM947XX=y
-CONFIG_BCM4710=y
-CONFIG_BCM4310=y
-CONFIG_BCM4704=y
-CONFIG_BCM5365=y
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
-CONFIG_PCI=y
-CONFIG_NONCOHERENT_IO=y
-CONFIG_NEW_TIME_C=y
-CONFIG_NEW_IRQ=y
-CONFIG_HND=y
-# CONFIG_MIPS_AU1000 is not set
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_VTAG_ICACHE is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_LLDSCD is not set
-# CONFIG_CPU_HAS_WB is not set
-CONFIG_CPU_HAS_SYNC=y
-
-#
-# General setup
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_BUILD_ELF64 is not set
-CONFIG_NET=y
-CONFIG_PCI=y
-# CONFIG_PCI_NEW is not set
-CONFIG_PCI_AUTO=y
-# CONFIG_PCI_NAMES is not set
-# CONFIG_ISA is not set
-# CONFIG_TC is not set
-# CONFIG_MCA is not set
-# CONFIG_SBUS is not set
-CONFIG_HOTPLUG=y
-
-#
-# PCMCIA/CardBus support
-#
-CONFIG_PCMCIA=m
-CONFIG_CARDBUS=y
-# CONFIG_TCIC is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_ELF_AOUT is not set
-# CONFIG_MIPS32_COMPAT is not set
-# CONFIG_MIPS32_O32 is not set
-# CONFIG_MIPS32_N32 is not set
-# CONFIG_BINFMT_ELF32 is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_OOM_KILLER is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_B1 is not set
-CONFIG_MTD_CFI_B2=y
-# CONFIG_MTD_CFI_B4 is not set
-# CONFIG_MTD_CFI_B8 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_SSTSTD=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_AMDSTD is not set
-# CONFIG_MTD_SHARP is not set
-# CONFIG_MTD_JEDEC is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BCM947XX=y
-# CONFIG_MTD_PB1000 is not set
-# CONFIG_MTD_PB1500 is not set
-# CONFIG_MTD_PB1100 is not set
-# CONFIG_MTD_BOSPORUS is not set
-# CONFIG_MTD_XXS1500 is not set
-# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
-# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
-# CONFIG_MTD_MIRAGE is not set
-# CONFIG_MTD_CSTM_MIPS_IXX is not set
-# CONFIG_MTD_OCELOT is not set
-# CONFIG_MTD_LASAT is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_SFLASH=y
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_DOC1000 is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOCPROBE is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_SPLINK=m
-# CONFIG_PARPORT_AMIGA is not set
-# CONFIG_PARPORT_MFC3 is not set
-# CONFIG_PARPORT_ATARI is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_SUNBPP is not set
-# CONFIG_PARPORT_IP22 is not set
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_CISS_MONITOR_THREAD is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_BLK_STATS is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_FILTER=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_NAT=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_TOS=y
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-
-#
-#   IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_IRC=y
-CONFIG_IP_NF_CT_ACCT=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_CT_PROTO_GRE=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-CONFIG_IP_NF_MMS=m
-CONFIG_IP_NF_RTSP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_QUOTA=m
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_CONDITION=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_UNCLEAN=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_LAYER7_MAXDATALEN=2048
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_MIRROR=m
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_PROTO_GRE=m
-CONFIG_IP_NF_NAT_H323=m
-CONFIG_IP_NF_NAT_MMS=m
-CONFIG_IP_NF_NAT_RTSP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_IMQ=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-#   IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-
-#
-#   IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_CONDITION=m
-CONFIG_IP6_NF_MATCH_MAC=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_TARGET_IMQ=m
-# CONFIG_KHTTPD is not set
-
-#
-#    SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-CONFIG_BRIDGE=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_CSZ=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_IPSEC_NAT_TRAVERSAL=y
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-# CONFIG_PHONE_IXJ_PCMCIA is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=m
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=m
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_IDEDISK_STROKE=y
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_OFFBOARD=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_PCI_WIP is not set
-# CONFIG_BLK_DEV_ADMA100 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_WDC_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_AMD74XX_OVERRIDE is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_HPT34X_AUTODMA is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_PDC202XX_OLD=m
-CONFIG_PDC202XX_BURST=y
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_PDC202XX_FORCE is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_IDEDMA_AUTO=y
-CONFIG_IDEDMA_IVB=y
-# CONFIG_DMA_NONPCI is not set
-CONFIG_BLK_DEV_PDC202XX=y
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
-# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-# CONFIG_BLK_DEV_ATARAID_SII is not set
-
-#
-# SCSI support
-#
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_SD_EXTRA_DEVS=5
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_SCSI_DEBUG_QUEUES is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_MEGARAID2 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_DMA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NCR53C7xx is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_NCR53C8XX is not set
-# CONFIG_SCSI_SYM53C8XX is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_SIM710 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_SCSI_PCMCIA is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_BOOT is not set
-# CONFIG_FUSION_ISENSE is not set
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LAN is not set
-
-#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_HND=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-CONFIG_TUN=m
-CONFIG_NET_RANDOM=y
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_APRICOT is not set
-CONFIG_B44=y
-# CONFIG_CS89x0 is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_DGRS is not set
-# CONFIG_DM9102 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_LNE390 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_NE3210 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNDANCE_MMIO is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_LAN_SAA9730 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE_MPPC=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_STRIP is not set
-# CONFIG_WAVELAN is not set
-# CONFIG_ARLAN is not set
-# CONFIG_AIRONET4500 is not set
-# CONFIG_AIRONET4500_NONCS is not set
-# CONFIG_AIRONET4500_PROC is not set
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-CONFIG_WL=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_ATMEL is not set
-# CONFIG_PRISM54 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-CONFIG_SHAPER=m
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Amateur Radio support
-#
-CONFIG_HAMRADIO=y
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_NETROM is not set
-# CONFIG_ROSE is not set
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-# CONFIG_6PACK is not set
-# CONFIG_BPQETHER is not set
-# CONFIG_SCC_DELAY is not set
-# CONFIG_SCC_TRXECHO is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_SOUNDMODEM is not set
-# CONFIG_YAM is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=128
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-CONFIG_PPDEV=m
-# CONFIG_TIPAR is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPMI_PANIC_EVENT is not set
-# CONFIG_IPMI_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_KCS is not set
-# CONFIG_IPMI_WATCHDOG is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_WAFER_WDT is not set
-# CONFIG_I810_TCO is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_60XX_WDT is not set
-# CONFIG_SC1200_WDT is not set
-# CONFIG_SCx200_WDT is not set
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_W83877F_WDT is not set
-# CONFIG_WDT is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_SCx200 is not set
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-
-#
-# Direct Rendering Manager (XFree86 DRI support)
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-CONFIG_PCMCIA_SERIAL_CS=m
-# CONFIG_SYNCLINK_CS is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_QFMT_V2 is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-CONFIG_EXT3_FS=m
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-CONFIG_VFAT_FS=m
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_BBC_ARMLIB is not set
-# CONFIG_JFFS2_BBC_LZO is not set
-CONFIG_JFFS2_BBC_LZARI=y
-# CONFIG_JFFS2_BBC_LZHD is not set
-# CONFIG_JFFS2_BBC_LZSS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=m
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_TRACE is not set
-# CONFIG_XFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_SUNRPC=m
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SMB_NLS is not set
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-CONFIG_VIDEO_PROC_FS=y
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_ZORAN_BUZ is not set
-# CONFIG_VIDEO_ZORAN_DC10 is not set
-# CONFIG_VIDEO_ZORAN_LML33 is not set
-# CONFIG_VIDEO_ZR36120 is not set
-# CONFIG_VIDEO_MEYE is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_MIROPCM20 is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_MIDI_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_MIDI_VIA82CXXX is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-# CONFIG_SOUND_WM97XX is not set
-
-#
-# USB support
-#
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_UHCI is not set
-CONFIG_USB_UHCI_ALT=m
-CONFIG_USB_OHCI=m
-CONFIG_USB_AUDIO=m
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_MIDI is not set
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HIDINPUT is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-CONFIG_USB_PWC=m
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDCETHER is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_BRLVGER is not set
-# CONFIG_USB_LCD is not set
-
-#
-# Support for USB gadgets
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-CONFIG_BLUEZ=m
-CONFIG_BLUEZ_L2CAP=m
-CONFIG_BLUEZ_SCO=m
-CONFIG_BLUEZ_RFCOMM=m
-CONFIG_BLUEZ_RFCOMM_TTY=y
-CONFIG_BLUEZ_BNEP=m
-CONFIG_BLUEZ_BNEP_MC_FILTER=y
-CONFIG_BLUEZ_BNEP_PROTO_FILTER=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BLUEZ_HCIUSB=m
-CONFIG_BLUEZ_HCIUSB_SCO=y
-CONFIG_BLUEZ_HCIUART=m
-CONFIG_BLUEZ_HCIUART_H4=y
-CONFIG_BLUEZ_HCIUART_BCSP=y
-CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y
-# CONFIG_BLUEZ_HCIBFUSB is not set
-# CONFIG_BLUEZ_HCIDTL1 is not set
-# CONFIG_BLUEZ_HCIBT3C is not set
-# CONFIG_BLUEZ_HCIBLUECARD is not set
-# CONFIG_BLUEZ_HCIBTUART is not set
-# CONFIG_BLUEZ_HCIVHCI is not set
-
-#
-# Kernel hacking
-#
-CONFIG_CROSSCOMPILE=y
-# CONFIG_RUNTIME_DEBUG is not set
-# CONFIG_REMOTE_DEBUG is not set
-# CONFIG_GDB_CONSOLE is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_MIPS_UNCACHED is not set
-CONFIG_LOG_BUF_SHIFT=0
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_FW_LOADER is not set
diff --git a/openwrt/target/linux/brcm-2.4/patches/001-bcm47xx.patch b/openwrt/target/linux/brcm-2.4/patches/001-bcm47xx.patch
deleted file mode 100644
index e1bd00bae2..0000000000
--- a/openwrt/target/linux/brcm-2.4/patches/001-bcm47xx.patch
+++ /dev/null
@@ -1,20040 +0,0 @@
-diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
---- linux.old/arch/mips/Makefile	2006-04-27 18:04:37.000000000 +0200
-+++ linux.dev/arch/mips/Makefile	2006-04-27 19:24:19.000000000 +0200
-@@ -726,6 +726,19 @@
- endif
- 
- #
-+# Broadcom BCM947XX variants
-+#
-+ifdef CONFIG_BCM947XX
-+LIBS		+= arch/mips/bcm947xx/generic/brcm.o arch/mips/bcm947xx/bcm947xx.o 
-+SUBDIRS		+= arch/mips/bcm947xx/generic arch/mips/bcm947xx 
-+LOADADDR	:= 0x80001000
-+
-+zImage: vmlinux
-+	$(MAKE) -C arch/$(ARCH)/bcm947xx/compressed
-+export LOADADDR
-+endif
-+
-+#
- # Choosing incompatible machines durings configuration will result in
- # error messages during linking.  Select a default linkscript if
- # none has been choosen above.
-@@ -778,6 +791,7 @@
- 	$(MAKE) -C arch/$(ARCH)/tools clean
- 	$(MAKE) -C arch/mips/baget clean
- 	$(MAKE) -C arch/mips/lasat clean
-+	$(MAKE) -C arch/mips/bcm947xx/compressed clean
- 
- archmrproper:
- 	@$(MAKEBOOT) mrproper
-diff -urN linux.old/arch/mips/bcm947xx/Makefile linux.dev/arch/mips/bcm947xx/Makefile
---- linux.old/arch/mips/bcm947xx/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/Makefile	2006-05-02 17:46:22.000000000 +0200
-@@ -0,0 +1,17 @@
-+#
-+# Makefile for the BCM947xx specific kernel interface routines
-+# under Linux.
-+#
-+
-+EXTRA_CFLAGS+=-I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
-+
-+O_TARGET        := bcm947xx.o
-+
-+export-objs     := export.o
-+obj-y		:= prom.o setup.o time.o sbmips.o gpio.o
-+obj-y		+= nvram.o nvram_linux.o sflash.o cfe_env.o
-+obj-y		+= sbutils.o bcmutils.o bcmsrom.o hndchipc.o
-+obj-$(CONFIG_PCI) += sbpci.o pcibios.o
-+obj-y 		+= export.o
-+
-+include $(TOPDIR)/Rules.make
-diff -urN linux.old/arch/mips/bcm947xx/bcmsrom.c linux.dev/arch/mips/bcm947xx/bcmsrom.c
---- linux.old/arch/mips/bcm947xx/bcmsrom.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/bcmsrom.c	2006-04-27 20:32:48.000000000 +0200
-@@ -0,0 +1,1212 @@
-+/*
-+ *  Misc useful routines to access NIC SROM/OTP .
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: bcmsrom.c,v 1.1.1.14 2006/04/15 01:28:25 michael Exp $
-+ */
-+
-+#include <typedefs.h>
-+#include <bcmdefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmsrom.h>
-+#include <bcmdevs.h>
-+#include <bcmendian.h>
-+#include <sbpcmcia.h>
-+#include <pcicfg.h>
-+#include <sbutils.h>
-+#include <bcmnvram.h>
-+
-+/* debug/trace */
-+#if defined(WLTEST)
-+#define	BS_ERROR(args)	printf args
-+#else
-+#define	BS_ERROR(args)
-+#endif	/* BCMDBG_ERR || WLTEST */
-+
-+#define	VARS_MAX	4096	/* should be reduced */
-+
-+#define WRITE_ENABLE_DELAY	500	/* 500 ms after write enable/disable toggle */
-+#define WRITE_WORD_DELAY	20	/* 20 ms between each word write */
-+
-+static int initvars_srom_pci(void *sbh, void *curmap, char **vars, uint *count);
-+static int initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, uint *count);
-+static int initvars_flash_sb(void *sbh, char **vars, uint *count);
-+static int srom_parsecis(osl_t *osh, uint8 **pcis, uint ciscnt, char **vars, uint *count);
-+static int sprom_cmd_pcmcia(osl_t *osh, uint8 cmd);
-+static int sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data);
-+static int sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data);
-+static int sprom_read_pci(osl_t *osh, uint16 *sprom, uint wordoff, uint16 *buf, uint nwords,
-+                          bool check_crc);
-+
-+static int initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count);
-+static int initvars_flash(osl_t *osh, char **vp, uint len, char *devpath);
-+
-+/*
-+ * Initialize local vars from the right source for this platform.
-+ * Return 0 on success, nonzero on error.
-+ */
-+int
-+srom_var_init(void *sbh, uint bustype, void *curmap, osl_t *osh, char **vars, uint *count)
-+{
-+	ASSERT(bustype == BUSTYPE(bustype));
-+	if (vars == NULL || count == NULL)
-+		return (0);
-+
-+	switch (BUSTYPE(bustype)) {
-+	case SB_BUS:
-+	case JTAG_BUS:
-+		return initvars_flash_sb(sbh, vars, count);
-+
-+	case PCI_BUS:
-+		ASSERT(curmap);	/* can not be NULL */
-+		return initvars_srom_pci(sbh, curmap, vars, count);
-+
-+	case PCMCIA_BUS:
-+		return initvars_cis_pcmcia(sbh, osh, vars, count);
-+
-+
-+	default:
-+		ASSERT(0);
-+	}
-+	return (-1);
-+}
-+
-+/* support only 16-bit word read from srom */
-+int
-+srom_read(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf)
-+{
-+	void *srom;
-+	uint i, off, nw;
-+
-+	ASSERT(bustype == BUSTYPE(bustype));
-+
-+	/* check input - 16-bit access only */
-+	if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
-+		return 1;
-+
-+	off = byteoff / 2;
-+	nw = nbytes / 2;
-+
-+	if (BUSTYPE(bustype) == PCI_BUS) {
-+		if (!curmap)
-+			return 1;
-+		srom = (uchar*)curmap + PCI_BAR0_SPROM_OFFSET;
-+		if (sprom_read_pci(osh, srom, off, buf, nw, FALSE))
-+			return 1;
-+	} else if (BUSTYPE(bustype) == PCMCIA_BUS) {
-+		for (i = 0; i < nw; i++) {
-+			if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i)))
-+				return 1;
-+		}
-+	} else {
-+		return 1;
-+	}
-+
-+	return 0;
-+}
-+
-+/* support only 16-bit word write into srom */
-+int
-+srom_write(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf)
-+{
-+	uint16 *srom;
-+	uint i, nw, crc_range;
-+	uint16 image[SPROM_SIZE];
-+	uint8 crc;
-+	volatile uint32 val32;
-+
-+	ASSERT(bustype == BUSTYPE(bustype));
-+
-+	/* check input - 16-bit access only */
-+	if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
-+		return 1;
-+
-+	/* Are we writing the whole thing at once? */
-+	if ((byteoff == 0) &&
-+	    ((nbytes == SPROM_SIZE) ||
-+	     (nbytes == (SPROM_CRC_RANGE * 2)) ||
-+	     (nbytes == (SROM4_WORDS * 2)))) {
-+		crc_range = nbytes;
-+		bcopy((void*)buf, (void*)image, nbytes);
-+		nw = nbytes / 2;
-+	} else {
-+		if ((BUSTYPE(bustype) == PCMCIA_BUS) || (BUSTYPE(bustype) == SDIO_BUS))
-+			crc_range = SPROM_SIZE;
-+		else
-+			crc_range = SPROM_CRC_RANGE * 2;	/* Tentative */
-+
-+		nw = crc_range / 2;
-+		/* read first 64 words from srom */
-+		if (srom_read(bustype, curmap, osh, 0, nw * 2, image))
-+			return 1;
-+		if (image[SROM4_SIGN] == SROM4_SIGNATURE) {
-+			crc_range = SROM4_WORDS;
-+			nw = crc_range / 2;
-+			if (srom_read(bustype, curmap, osh, 0, nw * 2, image))
-+				return 1;
-+		}
-+		/* make changes */
-+		bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes);
-+	}
-+
-+	/* calculate crc */
-+	htol16_buf(image, crc_range);
-+	crc = ~hndcrc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE);
-+	ltoh16_buf(image, crc_range);
-+	image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff);
-+
-+	if (BUSTYPE(bustype) == PCI_BUS) {
-+		srom = (uint16*)((uchar*)curmap + PCI_BAR0_SPROM_OFFSET);
-+		/* enable writes to the SPROM */
-+		val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32));
-+		val32 |= SPROM_WRITEEN;
-+		OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32);
-+		bcm_mdelay(WRITE_ENABLE_DELAY);
-+		/* write srom */
-+		for (i = 0; i < nw; i++) {
-+			W_REG(osh, &srom[i], image[i]);
-+			bcm_mdelay(WRITE_WORD_DELAY);
-+		}
-+		/* disable writes to the SPROM */
-+		OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 &
-+		                     ~SPROM_WRITEEN);
-+	} else if (BUSTYPE(bustype) == PCMCIA_BUS) {
-+		/* enable writes to the SPROM */
-+		if (sprom_cmd_pcmcia(osh, SROM_WEN))
-+			return 1;
-+		bcm_mdelay(WRITE_ENABLE_DELAY);
-+		/* write srom */
-+		for (i = 0; i < nw; i++) {
-+			sprom_write_pcmcia(osh, (uint16)(i), image[i]);
-+			bcm_mdelay(WRITE_WORD_DELAY);
-+		}
-+		/* disable writes to the SPROM */
-+		if (sprom_cmd_pcmcia(osh, SROM_WDS))
-+			return 1;
-+	} else {
-+		return 1;
-+	}
-+
-+	bcm_mdelay(WRITE_ENABLE_DELAY);
-+	return 0;
-+}
-+
-+
-+static int
-+srom_parsecis(osl_t *osh, uint8 **pcis, uint ciscnt, char **vars, uint *count)
-+{
-+	char eabuf[32];
-+	char *vp, *base;
-+	uint8 *cis, tup, tlen, sromrev = 1;
-+	int i, j;
-+	uint varsize;
-+	bool ag_init = FALSE;
-+	uint32 w32;
-+
-+	ASSERT(vars);
-+	ASSERT(count);
-+
-+	base = vp = MALLOC(osh, VARS_MAX);
-+	ASSERT(vp);
-+	if (!vp)
-+		return -2;
-+
-+	while (ciscnt--) {
-+		cis = *pcis++;
-+		i = 0;
-+		do {
-+			tup = cis[i++];
-+			tlen = cis[i++];
-+			if ((i + tlen) >= CIS_SIZE)
-+				break;
-+
-+			switch (tup) {
-+			case CISTPL_MANFID:
-+				vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]);
-+				vp++;
-+				vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]);
-+				vp++;
-+				break;
-+
-+			case CISTPL_FUNCE:
-+				switch (cis[i]) {
-+				case LAN_NID:
-+					ASSERT(cis[i + 1] == 6);
-+					bcm_ether_ntoa((struct ether_addr *)&cis[i + 2], eabuf);
-+					vp += sprintf(vp, "il0macaddr=%s", eabuf);
-+					vp++;
-+					break;
-+				case 1: 	/* SDIO Extended Data */
-+					vp += sprintf(vp, "sdmaxblk=%d",
-+					              (cis[i + 13] << 8) | cis[i + 12]);
-+					vp++;
-+					break;
-+				}
-+				break;
-+
-+			case CISTPL_CFTABLE:
-+				vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]);
-+				vp++;
-+				break;
-+
-+			case CISTPL_BRCM_HNBU:
-+				switch (cis[i]) {
-+				case HNBU_SROMREV:
-+					sromrev = cis[i + 1];
-+					break;
-+
-+				case HNBU_CHIPID:
-+					vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) +
-+					              cis[i + 1]);
-+					vp++;
-+					vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) +
-+					              cis[i + 3]);
-+					vp++;
-+					if (tlen == 7) {
-+						vp += sprintf(vp, "chiprev=%d",
-+						              (cis[i + 6] << 8) + cis[i + 5]);
-+						vp++;
-+					}
-+					break;
-+
-+				case HNBU_BOARDREV:
-+					vp += sprintf(vp, "boardrev=%d", cis[i + 1]);
-+					vp++;
-+					break;
-+
-+				case HNBU_AA:
-+					vp += sprintf(vp, "aa2g=%d", cis[i + 1]);
-+					vp++;
-+					break;
-+
-+				case HNBU_AG:
-+					vp += sprintf(vp, "ag0=%d", cis[i + 1]);
-+					vp++;
-+					ag_init = TRUE;
-+					break;
-+
-+				case HNBU_CC:
-+					ASSERT(sromrev == 1);
-+					vp += sprintf(vp, "cc=%d", cis[i + 1]);
-+					vp++;
-+					break;
-+
-+				case HNBU_PAPARMS:
-+					if (tlen == 2) {
-+						ASSERT(sromrev == 1);
-+						vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 1]);
-+						vp++;
-+					} else if (tlen >= 9) {
-+						if (tlen == 10) {
-+							ASSERT(sromrev == 2);
-+							vp += sprintf(vp, "opo=%d", cis[i + 9]);
-+							vp++;
-+						} else
-+							ASSERT(tlen == 9);
-+
-+						for (j = 0; j < 3; j++) {
-+							vp += sprintf(vp, "pa0b%d=%d", j,
-+							              (cis[i + (j * 2) + 2] << 8) +
-+							              cis[i + (j * 2) + 1]);
-+							vp++;
-+						}
-+						vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]);
-+						vp++;
-+						vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 8]);
-+						vp++;
-+					} else
-+						ASSERT(tlen >= 9);
-+					break;
-+
-+				case HNBU_OEM:
-+					ASSERT(sromrev == 1);
-+					vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
-+					              cis[i + 1], cis[i + 2],
-+					              cis[i + 3], cis[i + 4],
-+					              cis[i + 5], cis[i + 6],
-+					              cis[i + 7], cis[i + 8]);
-+					vp++;
-+					break;
-+
-+				case HNBU_BOARDFLAGS:
-+					w32 = (cis[i + 2] << 8) + cis[i + 1];
-+					if (tlen == 5)
-+						w32 |= (cis[i + 4] << 24) + (cis[i + 3] << 16);
-+					vp += sprintf(vp, "boardflags=0x%x", w32);
-+					vp++;
-+					break;
-+
-+				case HNBU_LEDS:
-+					if (cis[i + 1] != 0xff) {
-+						vp += sprintf(vp, "ledbh0=%d", cis[i + 1]);
-+						vp++;
-+					}
-+					if (cis[i + 2] != 0xff) {
-+						vp += sprintf(vp, "ledbh1=%d", cis[i + 2]);
-+						vp++;
-+					}
-+					if (cis[i + 3] != 0xff) {
-+						vp += sprintf(vp, "ledbh2=%d", cis[i + 3]);
-+						vp++;
-+					}
-+					if (cis[i + 4] != 0xff) {
-+						vp += sprintf(vp, "ledbh3=%d", cis[i + 4]);
-+						vp++;
-+					}
-+					break;
-+
-+				case HNBU_CCODE:
-+				{
-+					char str[3];
-+					ASSERT(sromrev > 1);
-+					str[0] = cis[i + 1];
-+					str[1] = cis[i + 2];
-+					str[2] = 0;
-+					vp += sprintf(vp, "ccode=%s", str);
-+					vp++;
-+					vp += sprintf(vp, "cctl=0x%x", cis[i + 3]);
-+					vp++;
-+					break;
-+				}
-+
-+				case HNBU_CCKPO:
-+					ASSERT(sromrev > 2);
-+					vp += sprintf(vp, "cckpo=0x%x",
-+					              (cis[i + 2] << 8) | cis[i + 1]);
-+					vp++;
-+					break;
-+
-+				case HNBU_OFDMPO:
-+					ASSERT(sromrev > 2);
-+					vp += sprintf(vp, "ofdmpo=0x%x",
-+					              (cis[i + 4] << 24) |
-+					              (cis[i + 3] << 16) |
-+					              (cis[i + 2] << 8) |
-+					              cis[i + 1]);
-+					vp++;
-+					break;
-+				}
-+				break;
-+
-+			}
-+			i += tlen;
-+		} while (tup != 0xff);
-+	}
-+
-+	/* Set the srom version */
-+	vp += sprintf(vp, "sromrev=%d", sromrev);
-+	vp++;
-+
-+	/* if there is no antenna gain field, set default */
-+	if (ag_init == FALSE) {
-+		ASSERT(sromrev == 1);
-+		vp += sprintf(vp, "ag0=%d", 0xff);
-+		vp++;
-+	}
-+
-+	/* final nullbyte terminator */
-+	*vp++ = '\0';
-+	varsize = (uint)(vp - base);
-+
-+	ASSERT((vp - base) < VARS_MAX);
-+
-+	if (varsize == VARS_MAX) {
-+		*vars = base;
-+	} else {
-+		vp = MALLOC(osh, varsize);
-+		ASSERT(vp);
-+		if (vp)
-+			bcopy(base, vp, varsize);
-+		MFREE(osh, base, VARS_MAX);
-+		*vars = vp;
-+		if (!vp) {
-+			*count = 0;
-+			return -2;
-+		}
-+	}
-+	*count = varsize;
-+
-+	return (0);
-+}
-+
-+
-+/* set PCMCIA sprom command register */
-+static int
-+sprom_cmd_pcmcia(osl_t *osh, uint8 cmd)
-+{
-+	uint8 status = 0;
-+	uint wait_cnt = 1000;
-+
-+	/* write sprom command register */
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1);
-+
-+	/* wait status */
-+	while (wait_cnt--) {
-+		OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1);
-+		if (status & SROM_DONE)
-+			return 0;
-+	}
-+
-+	return 1;
-+}
-+
-+/* read a word from the PCMCIA srom */
-+static int
-+sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data)
-+{
-+	uint8 addr_l, addr_h, data_l, data_h;
-+
-+	addr_l = (uint8)((addr * 2) & 0xff);
-+	addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
-+
-+	/* set address */
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
-+
-+	/* do read */
-+	if (sprom_cmd_pcmcia(osh, SROM_READ))
-+		return 1;
-+
-+	/* read data */
-+	data_h = data_l = 0;
-+	OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1);
-+	OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1);
-+
-+	*data = (data_h << 8) | data_l;
-+	return 0;
-+}
-+
-+/* write a word to the PCMCIA srom */
-+static int
-+sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data)
-+{
-+	uint8 addr_l, addr_h, data_l, data_h;
-+
-+	addr_l = (uint8)((addr * 2) & 0xff);
-+	addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
-+	data_l = (uint8)(data & 0xff);
-+	data_h = (uint8)((data >> 8) & 0xff);
-+
-+	/* set address */
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
-+
-+	/* write data */
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1);
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1);
-+
-+	/* do write */
-+	return sprom_cmd_pcmcia(osh, SROM_WRITE);
-+}
-+
-+/*
-+ * Read in and validate sprom.
-+ * Return 0 on success, nonzero on error.
-+ */
-+static int
-+sprom_read_pci(osl_t *osh, uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc)
-+{
-+	int err = 0;
-+	uint i;
-+
-+	/* read the sprom */
-+	for (i = 0; i < nwords; i++)
-+		buf[i] = R_REG(osh, &sprom[wordoff + i]);
-+
-+	if (check_crc) {
-+		/* fixup the endianness so crc8 will pass */
-+		htol16_buf(buf, nwords * 2);
-+		if (hndcrc8((uint8*)buf, nwords * 2, CRC8_INIT_VALUE) != CRC8_GOOD_VALUE)
-+			err = 1;
-+		/* now correct the endianness of the byte array */
-+		ltoh16_buf(buf, nwords * 2);
-+	}
-+
-+	return err;
-+}
-+
-+/*
-+* Create variable table from memory.
-+* Return 0 on success, nonzero on error.
-+*/
-+static int
-+initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count)
-+{
-+	int c = (int)(end - start);
-+
-+	/* do it only when there is more than just the null string */
-+	if (c > 1) {
-+		char *vp = MALLOC(osh, c);
-+		ASSERT(vp);
-+		if (!vp)
-+			return BCME_NOMEM;
-+		bcopy(start, vp, c);
-+		*vars = vp;
-+		*count = c;
-+	}
-+	else {
-+		*vars = NULL;
-+		*count = 0;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * Find variables with <devpath> from flash. 'base' points to the beginning
-+ * of the table upon enter and to the end of the table upon exit when success.
-+ * Return 0 on success, nonzero on error.
-+ */
-+static int
-+initvars_flash(osl_t *osh, char **base, uint len, char *devpath)
-+{
-+	char *vp = *base;
-+	char *flash;
-+	int err;
-+	char *s;
-+	uint l, dl, copy_len;
-+
-+	/* allocate memory and read in flash */
-+	if (!(flash = MALLOC(osh, NVRAM_SPACE)))
-+		return BCME_NOMEM;
-+	if ((err = nvram_getall(flash, NVRAM_SPACE)))
-+		goto exit;
-+
-+	/* grab vars with the <devpath> prefix in name */
-+	dl = strlen(devpath);
-+	for (s = flash; s && *s; s += l + 1) {
-+		l = strlen(s);
-+
-+		/* skip non-matching variable */
-+		if (strncmp(s, devpath, dl))
-+			continue;
-+
-+		/* is there enough room to copy? */
-+		copy_len = l - dl + 1;
-+		if (len < copy_len) {
-+			err = BCME_BUFTOOSHORT;
-+			goto exit;
-+		}
-+
-+		/* no prefix, just the name=value */
-+		strcpy(vp, &s[dl]);
-+		vp += copy_len;
-+		len -= copy_len;
-+	}
-+
-+	/* add null string as terminator */
-+	if (len < 1) {
-+		err = BCME_BUFTOOSHORT;
-+		goto exit;
-+	}
-+	*vp++ = '\0';
-+
-+	*base = vp;
-+
-+exit:	MFREE(osh, flash, NVRAM_SPACE);
-+	return err;
-+}
-+
-+/*
-+ * Initialize nonvolatile variable table from flash.
-+ * Return 0 on success, nonzero on error.
-+ */
-+static int
-+initvars_flash_sb(void *sbh, char **vars, uint *count)
-+{
-+	osl_t *osh = sb_osh(sbh);
-+	char devpath[SB_DEVPATH_BUFSZ];
-+	char *vp, *base;
-+	int err;
-+
-+	ASSERT(vars);
-+	ASSERT(count);
-+
-+	if ((err = sb_devpath(sbh, devpath, sizeof(devpath))))
-+		return err;
-+
-+	base = vp = MALLOC(osh, VARS_MAX);
-+	ASSERT(vp);
-+	if (!vp)
-+		return BCME_NOMEM;
-+
-+	if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath)))
-+		goto err;
-+
-+	err = initvars_table(osh, base, vp, vars, count);
-+
-+err:	MFREE(osh, base, VARS_MAX);
-+	return err;
-+}
-+
-+#ifdef WLTEST
-+char mfgsromvars[256];
-+char *defaultsromvars = "il0macaddr=00:11:22:33:44:51\0"
-+		"et0macaddr=00:11:22:33:44:52\0"
-+		"et1macaddr=00:11:22:33:44:53\0"
-+		"boardtype=0xffff\0"
-+		"boardrev=0x10\0"
-+		"boardflags=8\0"
-+		"sromrev=2\0"
-+		"aa2g=3";
-+#define	MFGSROM_DEFVARSLEN	147 /* default srom len */
-+#endif /* WL_TEST */
-+
-+/*
-+ * Initialize nonvolatile variable table from sprom.
-+ * Return 0 on success, nonzero on error.
-+ */
-+static int
-+initvars_srom_pci(void *sbh, void *curmap, char **vars, uint *count)
-+{
-+	uint16 w, *b;
-+	uint8 sromrev = 0;
-+	struct ether_addr ea;
-+	char eabuf[32];
-+	uint32 w32;
-+	int woff, i;
-+	char *vp, *base;
-+	osl_t *osh = sb_osh(sbh);
-+	bool flash = FALSE;
-+	char name[SB_DEVPATH_BUFSZ+16], *value;
-+	char devpath[SB_DEVPATH_BUFSZ];
-+	int err;
-+
-+	/*
-+	 * Apply CRC over SROM content regardless SROM is present or not,
-+	 * and use variable <devpath>sromrev's existance in flash to decide
-+	 * if we should return an error when CRC fails or read SROM variables
-+	 * from flash.
-+	 */
-+	b = MALLOC(osh, SROM_MAX);
-+	ASSERT(b);
-+	if (!b)
-+		return -2;
-+
-+	err = sprom_read_pci(osh, (void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b,
-+	                     64, TRUE);
-+	if (err == 0) {
-+		/* srom is good and is rev < 4 */
-+		/* top word of sprom contains version and crc8 */
-+		sromrev = b[63] & 0xff;
-+		/* bcm4401 sroms misprogrammed */
-+		if (sromrev == 0x10)
-+			sromrev = 1;
-+	} else if (b[SROM4_SIGN] == SROM4_SIGNATURE) {
-+		/* If sromrev >= 4, read more */
-+		err = sprom_read_pci(osh, (void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b,
-+		                     SROM4_WORDS, TRUE);
-+		sromrev = b[SROM4_WORDS - 1] & 0xff;
-+	}
-+
-+	if (err) {
-+#ifdef WLTEST
-+		BS_ERROR(("SROM Crc Error, so see if we could use a default\n"));
-+		w32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32));
-+		if (w32 & SPROM_OTPIN_USE) {
-+			BS_ERROR(("srom crc failed with OTP, use default vars....\n"));
-+			vp = base =  mfgsromvars;
-+			if (sb_chip(sbh) == BCM4311_CHIP_ID) {
-+				BS_ERROR(("setting the devid to be 4311\n"));
-+				vp += sprintf(vp, "devid=0x4311");
-+				vp++;
-+			}
-+			bcopy(defaultsromvars, 	vp, MFGSROM_DEFVARSLEN);
-+			vp += MFGSROM_DEFVARSLEN;
-+			goto varsdone;
-+		} else {
-+			BS_ERROR(("srom crc failed with SPROM....\n"));
-+#endif /* WLTEST */
-+			if ((err = sb_devpath(sbh, devpath, sizeof(devpath))))
-+				return err;
-+			sprintf(name, "%ssromrev", devpath);
-+			if (!(value = getvar(NULL, name)))
-+				return (-1);
-+			sromrev = (uint8)bcm_strtoul(value, NULL, 0);
-+			flash = TRUE;
-+#ifdef WLTEST
-+		}
-+#endif /* WLTEST */
-+	}
-+
-+	/* srom version check */
-+	if (sromrev > 4)
-+		return (-2);
-+
-+	ASSERT(vars);
-+	ASSERT(count);
-+
-+	base = vp = MALLOC(osh, VARS_MAX);
-+	ASSERT(vp);
-+	if (!vp)
-+		return -2;
-+
-+	/* read variables from flash */
-+	if (flash) {
-+		if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath)))
-+			goto err;
-+		goto varsdone;
-+	}
-+
-+	vp += sprintf(vp, "sromrev=%d", sromrev);
-+	vp++;
-+
-+	if (sromrev >= 4) {
-+		uint path, pathbase;
-+		const uint pathbases[MAX_PATH] = {SROM4_PATH0, SROM4_PATH1,
-+		                                  SROM4_PATH2, SROM4_PATH3};
-+
-+		vp += sprintf(vp, "boardrev=%d", b[SROM4_BREV]);
-+		vp++;
-+
-+		vp += sprintf(vp, "boardflags=%d", (b[SROM4_BFL1] << 16) | b[SROM4_BFL0]);
-+		vp++;
-+
-+		vp += sprintf(vp, "boardflags2=%d", (b[SROM4_BFL3] << 16) | b[SROM4_BFL2]);
-+		vp++;
-+
-+		/* The macaddr */
-+		ea.octet[0] = (b[SROM4_MACHI] >> 8) & 0xff;
-+		ea.octet[1] = b[SROM4_MACHI] & 0xff;
-+		ea.octet[2] = (b[SROM4_MACMID] >> 8) & 0xff;
-+		ea.octet[3] = b[SROM4_MACMID] & 0xff;
-+		ea.octet[4] = (b[SROM4_MACLO] >> 8) & 0xff;
-+		ea.octet[5] = b[SROM4_MACLO] & 0xff;
-+		bcm_ether_ntoa(&ea, eabuf);
-+		vp += sprintf(vp, "macaddr=%s", eabuf);
-+		vp++;
-+
-+		w = b[SROM4_CCODE];
-+		if (w == 0)
-+			vp += sprintf(vp, "ccode=");
-+		else
-+			vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff));
-+		vp++;
-+		vp += sprintf(vp, "regrev=%d", b[SROM4_REGREV]);
-+		vp++;
-+
-+		w = b[SROM4_LEDBH10];
-+		if ((w != 0) && (w != 0xffff)) {
-+			/* ledbh0 */
-+			vp += sprintf(vp, "ledbh0=%d", (w & 0xff));
-+			vp++;
-+
-+			/* ledbh1 */
-+			vp += sprintf(vp, "ledbh1=%d", (w >> 8) & 0xff);
-+			vp++;
-+		}
-+		w = b[SROM4_LEDBH32];
-+		if ((w != 0) && (w != 0xffff)) {
-+			/* ledbh2 */
-+			vp += sprintf(vp, "ledbh2=%d", w & 0xff);
-+			vp++;
-+
-+			/* ledbh3 */
-+			vp += sprintf(vp, "ledbh3=%d", (w >> 8) & 0xff);
-+			vp++;
-+		}
-+		/* LED Powersave duty cycle (oncount >> 24) (offcount >> 8) */
-+		w = b[SROM4_LEDDC];
-+		w32 = ((uint32)((unsigned char)(w >> 8) & 0xff) << 24) |  /* oncount */
-+			((uint32)((unsigned char)(w & 0xff)) << 8); /* offcount */
-+		vp += sprintf(vp, "leddc=%d", w32);
-+		vp++;
-+
-+		w = b[SROM4_AA];
-+		vp += sprintf(vp, "aa2g=%d", w & SROM4_AA2G_MASK);
-+		vp++;
-+		vp += sprintf(vp, "aa5g=%d", w >> SROM4_AA5G_SHIFT);
-+		vp++;
-+
-+		w = b[SROM4_AG10];
-+		vp += sprintf(vp, "ag0=%d", w & 0xff);
-+		vp++;
-+		vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff);
-+		vp++;
-+		w = b[SROM4_AG32];
-+		vp += sprintf(vp, "ag2=%d", w & 0xff);
-+		vp++;
-+		vp += sprintf(vp, "ag3=%d", (w >> 8) & 0xff);
-+		vp++;
-+
-+		/* Fixed power indices when power control is disabled */
-+		for (i = 0; i < 2; i++) {
-+			w = b[SROM4_TXPID2G + i];
-+			vp += sprintf(vp, "txpid2ga%d=%d", 2 * i, w & 0xff);
-+			vp++;
-+			vp += sprintf(vp, "txpid2ga%d=%d", (2 * i) + 1, (w >> 8) & 0xff);
-+			vp++;
-+			w = b[SROM4_TXPID5G + i];
-+			vp += sprintf(vp, "txpid5ga%d=%d", 2 * i, w & 0xff);
-+			vp++;
-+			vp += sprintf(vp, "txpid5ga%d=%d", (2 * i) + 1, (w >> 8) & 0xff);
-+			vp++;
-+			w = b[SROM4_TXPID5GL + i];
-+			vp += sprintf(vp, "txpid5gla%d=%d", 2 * i, w & 0xff);
-+			vp++;
-+			vp += sprintf(vp, "txpid5gla%d=%d", (2 * i) + 1, (w >> 8) & 0xff);
-+			vp++;
-+			w = b[SROM4_TXPID5GH + i];
-+			vp += sprintf(vp, "txpid5gha%d=%d", 2 * i, w & 0xff);
-+			vp++;
-+			vp += sprintf(vp, "txpid5gha%d=%d", (2 * i) + 1, (w >> 8) & 0xff);
-+			vp++;
-+		}
-+
-+		/* Per path variables */
-+		for (path = 0; path < MAX_PATH; path++) {
-+			pathbase = pathbases[path];
-+			w = b[pathbase + SROM4_2G_ITT_MAXP];
-+			vp += sprintf(vp, "itt2ga%d=%d", path, w >> B2G_ITT_SHIFT);
-+			vp++;
-+			vp += sprintf(vp, "maxp2ga%d=%d", path, w & B2G_MAXP_MASK);
-+			vp++;
-+
-+			for (i = 0; i < 4; i++) {
-+				vp += sprintf(vp, "pa2gw%da%d=%d", i, path,
-+				              b[pathbase + SROM4_2G_PA + i]);
-+				vp++;
-+			}
-+
-+			w = b[pathbase + SROM4_5G_ITT_MAXP];
-+			vp += sprintf(vp, "itt5ga%d=%d", path, w >> B5G_ITT_SHIFT);
-+			vp++;
-+			vp += sprintf(vp, "maxp5ga%d=%d", path, w & B5G_MAXP_MASK);
-+			vp++;
-+
-+			w = b[pathbase + SROM4_5GLH_MAXP];
-+			vp += sprintf(vp, "maxp5lga%d=%d", path, w >> B5GL_MAXP_SHIFT);
-+			vp++;
-+			vp += sprintf(vp, "maxp5gha%d=%d", path, w & B5GH_MAXP_MASK);
-+			vp++;
-+
-+			for (i = 0; i < 4; i++) {
-+				vp += sprintf(vp, "pa5gw%da%d=%d", i, path,
-+				              b[pathbase + SROM4_5G_PA + i]);
-+				vp++;
-+				vp += sprintf(vp, "pa5glw%da%d=%d", i, path,
-+				              b[pathbase + SROM4_5GL_PA + i]);
-+				vp++;
-+				vp += sprintf(vp, "pa5hgw%da%d=%d", i, path,
-+				              b[pathbase + SROM4_5GH_PA + i]);
-+				vp++;
-+			}
-+		}
-+
-+		vp += sprintf(vp, "cck2gpo=%d", b[SROM4_2G_CCKPO]);
-+		vp++;
-+
-+		w32 = ((uint32)b[SROM4_2G_OFDMPO + 1] << 16) | b[SROM4_2G_OFDMPO];
-+		vp += sprintf(vp, "ofdm2gpo=%d", w32);
-+		vp++;
-+
-+		w32 = ((uint32)b[SROM4_5G_OFDMPO + 1] << 16) | b[SROM4_5G_OFDMPO];
-+		vp += sprintf(vp, "ofdm5gpo=%d", w32);
-+		vp++;
-+
-+		w32 = ((uint32)b[SROM4_5GL_OFDMPO + 1] << 16) | b[SROM4_5GL_OFDMPO];
-+		vp += sprintf(vp, "ofdm5glpo=%d", w32);
-+		vp++;
-+
-+		w32 = ((uint32)b[SROM4_5GH_OFDMPO + 1] << 16) | b[SROM4_5GH_OFDMPO];
-+		vp += sprintf(vp, "ofdm5ghpo=%d", w32);
-+		vp++;
-+
-+		for (i = 0; i < 8; i++) {
-+			vp += sprintf(vp, "mcs2gpo%d=%d", i, b[SROM4_2G_MCSPO]);
-+			vp++;
-+			vp += sprintf(vp, "mcs5gpo%d=%d", i, b[SROM4_5G_MCSPO]);
-+			vp++;
-+			vp += sprintf(vp, "mcs5glpo%d=%d", i, b[SROM4_5GL_MCSPO]);
-+			vp++;
-+			vp += sprintf(vp, "mcs5ghpo%d=%d", i, b[SROM4_5GH_MCSPO]);
-+			vp++;
-+		}
-+
-+		vp += sprintf(vp, "ccdpo%d=%d", i, b[SROM4_CCDPO]);
-+		vp++;
-+		vp += sprintf(vp, "stbcpo%d=%d", i, b[SROM4_STBCPO]);
-+		vp++;
-+		vp += sprintf(vp, "bw40po%d=%d", i, b[SROM4_BW40PO]);
-+		vp++;
-+		vp += sprintf(vp, "bwduppo%d=%d", i, b[SROM4_BWDUPPO]);
-+		vp++;
-+
-+		goto done;
-+	}
-+	if (sromrev >= 3) {
-+		/* New section takes over the 3th hardware function space */
-+
-+		/* Words 22+23 are 11a (mid) ofdm power offsets */
-+		w32 = ((uint32)b[23] << 16) | b[22];
-+		vp += sprintf(vp, "ofdmapo=%d", w32);
-+		vp++;
-+
-+		/* Words 24+25 are 11a (low) ofdm power offsets */
-+		w32 = ((uint32)b[25] << 16) | b[24];
-+		vp += sprintf(vp, "ofdmalpo=%d", w32);
-+		vp++;
-+
-+		/* Words 26+27 are 11a (high) ofdm power offsets */
-+		w32 = ((uint32)b[27] << 16) | b[26];
-+		vp += sprintf(vp, "ofdmahpo=%d", w32);
-+		vp++;
-+
-+		/* LED Powersave duty cycle (oncount >> 24) (offcount >> 8) */
-+		w32 = ((uint32)((unsigned char)(b[21] >> 8) & 0xff) << 24) |  /* oncount */
-+			((uint32)((unsigned char)(b[21] & 0xff)) << 8); /* offcount */
-+		vp += sprintf(vp, "leddc=%d", w32);
-+
-+		vp++;
-+	}
-+
-+	if (sromrev >= 2) {
-+		/* New section takes over the 4th hardware function space */
-+
-+		/* Word 29 is max power 11a high/low */
-+		w = b[29];
-+		vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff);
-+		vp++;
-+		vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff);
-+		vp++;
-+
-+		/* Words 30-32 set the 11alow pa settings,
-+		 * 33-35 are the 11ahigh ones.
-+		 */
-+		for (i = 0; i < 3; i++) {
-+			vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]);
-+			vp++;
-+			vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]);
-+			vp++;
-+		}
-+		w = b[59];
-+		if (w == 0)
-+			vp += sprintf(vp, "ccode=");
-+		else
-+			vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff));
-+		vp++;
-+
-+	}
-+
-+	/* parameter section of sprom starts at byte offset 72 */
-+	woff = 72/2;
-+
-+	/* first 6 bytes are il0macaddr */
-+	ea.octet[0] = (b[woff] >> 8) & 0xff;
-+	ea.octet[1] = b[woff] & 0xff;
-+	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+	ea.octet[3] = b[woff+1] & 0xff;
-+	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+	ea.octet[5] = b[woff+2] & 0xff;
-+	woff += 3;
-+	bcm_ether_ntoa(&ea, eabuf);
-+	vp += sprintf(vp, "il0macaddr=%s", eabuf);
-+	vp++;
-+
-+	/* next 6 bytes are et0macaddr */
-+	ea.octet[0] = (b[woff] >> 8) & 0xff;
-+	ea.octet[1] = b[woff] & 0xff;
-+	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+	ea.octet[3] = b[woff+1] & 0xff;
-+	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+	ea.octet[5] = b[woff+2] & 0xff;
-+	woff += 3;
-+	bcm_ether_ntoa(&ea, eabuf);
-+	vp += sprintf(vp, "et0macaddr=%s", eabuf);
-+	vp++;
-+
-+	/* next 6 bytes are et1macaddr */
-+	ea.octet[0] = (b[woff] >> 8) & 0xff;
-+	ea.octet[1] = b[woff] & 0xff;
-+	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+	ea.octet[3] = b[woff+1] & 0xff;
-+	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+	ea.octet[5] = b[woff+2] & 0xff;
-+	woff += 3;
-+	bcm_ether_ntoa(&ea, eabuf);
-+	vp += sprintf(vp, "et1macaddr=%s", eabuf);
-+	vp++;
-+
-+	/*
-+	 * Enet phy settings one or two singles or a dual
-+	 * Bits 4-0 : MII address for enet0 (0x1f for not there)
-+	 * Bits 9-5 : MII address for enet1 (0x1f for not there)
-+	 * Bit 14   : Mdio for enet0
-+	 * Bit 15   : Mdio for enet1
-+	 */
-+	w = b[woff];
-+	vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f));
-+	vp++;
-+	vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f));
-+	vp++;
-+	vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1));
-+	vp++;
-+	vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1));
-+	vp++;
-+
-+	/* Word 46 has board rev, antennas 0/1 & Country code/control */
-+	w = b[46];
-+	vp += sprintf(vp, "boardrev=%d", w & 0xff);
-+	vp++;
-+
-+	if (sromrev > 1)
-+		vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf);
-+	else
-+		vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf);
-+	vp++;
-+
-+	vp += sprintf(vp, "aa2g=%d", (w >> 12) & 0x3);
-+	vp++;
-+
-+	vp += sprintf(vp, "aa5g=%d", (w >> 14) & 0x3);
-+	vp++;
-+
-+	/* Words 47-49 set the (wl) pa settings */
-+	woff = 47;
-+
-+	for (i = 0; i < 3; i++) {
-+		vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]);
-+		vp++;
-+		vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]);
-+		vp++;
-+	}
-+
-+	/*
-+	 * Words 50-51 set the customer-configured wl led behavior.
-+	 * 8 bits/gpio pin.  High bit:  activehi=0, activelo=1;
-+	 * LED behavior values defined in wlioctl.h .
-+	 */
-+	w = b[50];
-+	if ((w != 0) && (w != 0xffff)) {
-+		/* ledbh0 */
-+		vp += sprintf(vp, "ledbh0=%d", (w & 0xff));
-+		vp++;
-+
-+		/* ledbh1 */
-+		vp += sprintf(vp, "ledbh1=%d", (w >> 8) & 0xff);
-+		vp++;
-+	}
-+	w = b[51];
-+	if ((w != 0) && (w != 0xffff)) {
-+		/* ledbh2 */
-+		vp += sprintf(vp, "ledbh2=%d", w & 0xff);
-+		vp++;
-+
-+		/* ledbh */
-+		vp += sprintf(vp, "ledbh3=%d", (w >> 8) & 0xff);
-+		vp++;
-+	}
-+
-+	/* Word 52 is max power 0/1 */
-+	w = b[52];
-+	vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff);
-+	vp++;
-+	vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff);
-+	vp++;
-+
-+	/* Word 56 is idle tssi target 0/1 */
-+	w = b[56];
-+	vp += sprintf(vp, "pa0itssit=%d", w & 0xff);
-+	vp++;
-+	vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff);
-+	vp++;
-+
-+	/* Word 57 is boardflags, if not programmed make it zero */
-+	w32 = (uint32)b[57];
-+	if (w32 == 0xffff) w32 = 0;
-+	if (sromrev > 1) {
-+		/* Word 28 is the high bits of boardflags */
-+		w32 |= (uint32)b[28] << 16;
-+	}
-+	vp += sprintf(vp, "boardflags=%d", w32);
-+	vp++;
-+
-+	/* Word 58 is antenna gain 0/1 */
-+	w = b[58];
-+	vp += sprintf(vp, "ag0=%d", w & 0xff);
-+	vp++;
-+
-+	vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff);
-+	vp++;
-+
-+	if (sromrev == 1) {
-+		/* set the oem string */
-+		vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
-+		              ((b[59] >> 8) & 0xff), (b[59] & 0xff),
-+		              ((b[60] >> 8) & 0xff), (b[60] & 0xff),
-+		              ((b[61] >> 8) & 0xff), (b[61] & 0xff),
-+		              ((b[62] >> 8) & 0xff), (b[62] & 0xff));
-+		vp++;
-+	} else if (sromrev == 2) {
-+		/* Word 60 OFDM tx power offset from CCK level */
-+		/* OFDM Power Offset - opo */
-+		vp += sprintf(vp, "opo=%d", b[60] & 0xff);
-+		vp++;
-+	} else {
-+		/* Word 60: cck power offsets */
-+		vp += sprintf(vp, "cckpo=%d", b[60]);
-+		vp++;
-+
-+		/* Words 61+62: 11g ofdm power offsets */
-+		w32 = ((uint32)b[62] << 16) | b[61];
-+		vp += sprintf(vp, "ofdmgpo=%d", w32);
-+		vp++;
-+	}
-+
-+	/* final nullbyte terminator */
-+done:	*vp++ = '\0';
-+
-+	ASSERT((vp - base) <= VARS_MAX);
-+
-+varsdone:
-+	err = initvars_table(osh, base, vp, vars, count);
-+
-+err:
-+#ifdef WLTEST
-+	if (base != mfgsromvars)
-+#endif
-+		MFREE(osh, base, VARS_MAX);
-+	MFREE(osh, b, SROM_MAX);
-+	return err;
-+}
-+
-+/*
-+ * Read the cis and call parsecis to initialize the vars.
-+ * Return 0 on success, nonzero on error.
-+ */
-+static int
-+initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, uint *count)
-+{
-+	uint8 *cis = NULL;
-+	int rc;
-+	uint data_sz;
-+
-+	data_sz = (sb_pcmciarev(sbh) == 1) ? (SPROM_SIZE * 2) : CIS_SIZE;
-+
-+	if ((cis = MALLOC(osh, data_sz)) == NULL)
-+		return (-2);
-+
-+	if (sb_pcmciarev(sbh) == 1) {
-+		if (srom_read(PCMCIA_BUS, (void *)NULL, osh, 0, data_sz, (uint16 *)cis)) {
-+			MFREE(osh, cis, data_sz);
-+			return (-1);
-+		}
-+		/* fix up endianess for 16-bit data vs 8-bit parsing */
-+		ltoh16_buf((uint16 *)cis, data_sz);
-+	} else
-+		OSL_PCMCIA_READ_ATTR(osh, 0, cis, data_sz);
-+
-+	rc = srom_parsecis(osh, &cis, 1, vars, count);
-+
-+	MFREE(osh, cis, data_sz);
-+
-+	return (rc);
-+}
-+
-diff -urN linux.old/arch/mips/bcm947xx/bcmutils.c linux.dev/arch/mips/bcm947xx/bcmutils.c
---- linux.old/arch/mips/bcm947xx/bcmutils.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/bcmutils.c	2006-04-28 00:34:02.000000000 +0200
-@@ -0,0 +1,247 @@
-+/*
-+ * Misc useful OS-independent routines.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: bcmutils.c,v 1.1.1.12 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#include <typedefs.h>
-+#include <bcmdefs.h>
-+#include <stdarg.h>
-+#include <bcmutils.h>
-+#include <osl.h>
-+#include <sbutils.h>
-+#include <bcmnvram.h>
-+#include <bcmendian.h>
-+#include <bcmdevs.h>
-+
-+unsigned char bcm_ctype[] = {
-+	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 0-7 */
-+	_BCM_C, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C,
-+	_BCM_C,	/* 8-15 */
-+	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 16-23 */
-+	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 24-31 */
-+	_BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,		/* 32-39 */
-+	_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 40-47 */
-+	_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,			/* 48-55 */
-+	_BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 56-63 */
-+	_BCM_P, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X,
-+	_BCM_U|_BCM_X, _BCM_U, /* 64-71 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,			/* 72-79 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,			/* 80-87 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 88-95 */
-+	_BCM_P, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X,
-+	_BCM_L|_BCM_X, _BCM_L, /* 96-103 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,		/* 128-143 */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,		/* 144-159 */
-+	_BCM_S|_BCM_SP, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P,
-+	_BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P,	/* 160-175 */
-+	_BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P,
-+	_BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P,	/* 176-191 */
-+	_BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U,
-+	_BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U,	/* 192-207 */
-+	_BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_P, _BCM_U, _BCM_U, _BCM_U,
-+	_BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_L,	/* 208-223 */
-+	_BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L,
-+	_BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L,	/* 224-239 */
-+	_BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_P, _BCM_L, _BCM_L, _BCM_L,
-+	_BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L /* 240-255 */
-+};
-+
-+
-+ulong
-+bcm_strtoul(char *cp, char **endp, uint base)
-+{
-+	ulong result, value;
-+	bool minus;
-+
-+	minus = FALSE;
-+
-+	while (bcm_isspace(*cp))
-+		cp++;
-+
-+	if (cp[0] == '+')
-+		cp++;
-+	else if (cp[0] == '-') {
-+		minus = TRUE;
-+		cp++;
-+	}
-+
-+	if (base == 0) {
-+		if (cp[0] == '0') {
-+			if ((cp[1] == 'x') || (cp[1] == 'X')) {
-+				base = 16;
-+				cp = &cp[2];
-+			} else {
-+				base = 8;
-+				cp = &cp[1];
-+			}
-+		} else
-+			base = 10;
-+	} else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) {
-+		cp = &cp[2];
-+	}
-+
-+	result = 0;
-+
-+	while (bcm_isxdigit(*cp) &&
-+	       (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) {
-+		result = result*base + value;
-+		cp++;
-+	}
-+
-+	if (minus)
-+		result = (ulong)(result * -1);
-+
-+	if (endp)
-+		*endp = (char *)cp;
-+
-+	return (result);
-+}
-+
-+uchar
-+bcm_toupper(uchar c)
-+{
-+	if (bcm_islower(c))
-+		c -= 'a'-'A';
-+	return (c);
-+}
-+
-+char*
-+bcm_ether_ntoa(struct ether_addr *ea, char *buf)
-+{
-+	sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x",
-+		ea->octet[0]&0xff, ea->octet[1]&0xff, ea->octet[2]&0xff,
-+		ea->octet[3]&0xff, ea->octet[4]&0xff, ea->octet[5]&0xff);
-+	return (buf);
-+}
-+
-+
-+/*
-+ * Search the name=value vars for a specific one and return its value.
-+ * Returns NULL if not found.
-+ */
-+char*
-+getvar(char *vars, char *name)
-+{
-+	char *s;
-+	int len;
-+
-+	len = strlen(name);
-+
-+	/* first look in vars[] */
-+	for (s = vars; s && *s;) {
-+		/* CSTYLED */
-+		if ((memcmp(s, name, len) == 0) && (s[len] == '='))
-+			return (&s[len+1]);
-+
-+		while (*s++)
-+			;
-+	}
-+
-+	/* then query nvram */
-+	return (nvram_get(name));
-+}
-+
-+/*
-+ * Search the vars for a specific one and return its value as
-+ * an integer. Returns 0 if not found.
-+ */
-+int
-+getintvar(char *vars, char *name)
-+{
-+	char *val;
-+
-+	if ((val = getvar(vars, name)) == NULL)
-+		return (0);
-+
-+	return (bcm_strtoul(val, NULL, 0));
-+}
-+
-+
-+/*******************************************************************************
-+ * crc8
-+ *
-+ * Computes a crc8 over the input data using the polynomial:
-+ *
-+ *       x^8 + x^7 +x^6 + x^4 + x^2 + 1
-+ *
-+ * The caller provides the initial value (either CRC8_INIT_VALUE
-+ * or the previous returned value) to allow for processing of
-+ * discontiguous blocks of data.  When generating the CRC the
-+ * caller is responsible for complementing the final return value
-+ * and inserting it into the byte stream.  When checking, a final
-+ * return value of CRC8_GOOD_VALUE indicates a valid CRC.
-+ *
-+ * Reference: Dallas Semiconductor Application Note 27
-+ *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
-+ *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
-+ *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
-+ *
-+ * ****************************************************************************
-+ */
-+
-+static uint8 crc8_table[256] = {
-+    0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
-+    0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
-+    0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
-+    0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
-+    0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
-+    0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
-+    0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
-+    0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
-+    0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
-+    0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
-+    0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
-+    0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
-+    0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
-+    0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
-+    0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
-+    0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
-+    0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
-+    0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
-+    0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
-+    0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
-+    0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
-+    0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
-+    0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
-+    0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
-+    0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
-+    0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
-+    0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
-+    0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
-+    0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
-+    0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
-+    0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
-+    0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
-+};
-+
-+#define CRC_INNER_LOOP(n, c, x) \
-+	(c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
-+
-+uint8
-+hndcrc8(
-+	uint8 *pdata,	/* pointer to array of data to process */
-+	uint  nbytes,	/* number of input data bytes to process */
-+	uint8 crc	/* either CRC8_INIT_VALUE or previous return value */
-+)
-+{
-+	/* hard code the crc loop instead of using CRC_INNER_LOOP macro
-+	 * to avoid the undefined and unnecessary (uint8 >> 8) operation.
-+	 */
-+	while (nbytes-- > 0)
-+		crc = crc8_table[(crc ^ *pdata++) & 0xff];
-+
-+	return crc;
-+}
-+
-+
-diff -urN linux.old/arch/mips/bcm947xx/cfe_env.c linux.dev/arch/mips/bcm947xx/cfe_env.c
---- linux.old/arch/mips/bcm947xx/cfe_env.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/cfe_env.c	2006-04-27 19:24:19.000000000 +0200
-@@ -0,0 +1,234 @@
-+/*
-+ * NVRAM variable manipulation (Linux kernel half)
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmendian.h>
-+#include <bcmutils.h>
-+
-+#define NVRAM_SIZE       (0x1ff0)
-+static char _nvdata[NVRAM_SIZE] __initdata;
-+static char _valuestr[256] __initdata;
-+
-+/*
-+ * TLV types.  These codes are used in the "type-length-value"
-+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
-+ *
-+ * The layout of the flash/nvram is as follows:
-+ *
-+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
-+ *
-+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
-+ * The "length" field marks the length of the data section, not
-+ * including the type and length fields.
-+ *
-+ * Environment variables are stored as follows:
-+ *
-+ * <type_env> <length> <flags> <name> = <value>
-+ *
-+ * If bit 0 (low bit) is set, the length is an 8-bit value.
-+ * If bit 0 (low bit) is clear, the length is a 16-bit value
-+ * 
-+ * Bit 7 set indicates "user" TLVs.  In this case, bit 0 still
-+ * indicates the size of the length field.  
-+ *
-+ * Flags are from the constants below:
-+ *
-+ */
-+#define ENV_LENGTH_16BITS	0x00	/* for low bit */
-+#define ENV_LENGTH_8BITS	0x01
-+
-+#define ENV_TYPE_USER		0x80
-+
-+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-+
-+/*
-+ * The actual TLV types we support
-+ */
-+
-+#define ENV_TLV_TYPE_END	0x00	
-+#define ENV_TLV_TYPE_ENV	ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-+
-+/*
-+ * Environment variable flags 
-+ */
-+
-+#define ENV_FLG_NORMAL		0x00	/* normal read/write */
-+#define ENV_FLG_BUILTIN		0x01	/* builtin - not stored in flash */
-+#define ENV_FLG_READONLY	0x02	/* read-only - cannot be changed */
-+
-+#define ENV_FLG_MASK		0xFF	/* mask of attributes we keep */
-+#define ENV_FLG_ADMIN		0x100	/* lets us internally override permissions */
-+
-+
-+/*  *********************************************************************
-+    *  _nvram_read(buffer,offset,length)
-+    *  
-+    *  Read data from the NVRAM device
-+    *  
-+    *  Input parameters: 
-+    *  	   buffer - destination buffer
-+    *  	   offset - offset of data to read
-+    *  	   length - number of bytes to read
-+    *  	   
-+    *  Return value:
-+    *  	   number of bytes read, or <0 if error occured
-+    ********************************************************************* */
-+static int
-+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-+{
-+    int i;
-+    if (offset > NVRAM_SIZE)
-+	return -1; 
-+
-+    for ( i = 0; i < length; i++) {
-+	buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-+    }
-+    return length;
-+}
-+
-+
-+static char*
-+_strnchr(const char *dest,int c,size_t cnt)
-+{
-+	while (*dest && (cnt > 0)) {
-+	if (*dest == c) return (char *) dest;
-+	dest++;
-+	cnt--;
-+	}
-+	return NULL;
-+}
-+
-+
-+
-+/*
-+ * Core support API: Externally visible.
-+ */
-+
-+/*
-+ * Get the value of an NVRAM variable
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NULL if undefined
-+ */
-+
-+char* 
-+cfe_env_get(unsigned char *nv_buf, char* name)
-+{
-+    int size;
-+    unsigned char *buffer;
-+    unsigned char *ptr;
-+    unsigned char *envval;
-+    unsigned int reclen;
-+    unsigned int rectype;
-+    int offset;
-+    int flg;
-+    
-+    size = NVRAM_SIZE;
-+    buffer = &_nvdata[0];
-+
-+    ptr = buffer;
-+    offset = 0;
-+
-+    /* Read the record type and length */
-+    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+	goto error;
-+    }
-+    
-+    while ((*ptr != ENV_TLV_TYPE_END)  && (size > 1)) {
-+
-+	/* Adjust pointer for TLV type */
-+	rectype = *(ptr);
-+	offset++;
-+	size--;
-+
-+	/* 
-+	 * Read the length.  It can be either 1 or 2 bytes
-+	 * depending on the code 
-+	 */
-+	if (rectype & ENV_LENGTH_8BITS) {
-+	    /* Read the record type and length - 8 bits */
-+	    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+		goto error;
-+	    }
-+	    reclen = *(ptr);
-+	    size--;
-+	    offset++;
-+	}
-+	else {
-+	    /* Read the record type and length - 16 bits, MSB first */
-+	    if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-+		goto error;
-+	    }
-+	    reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-+	    size -= 2;
-+	    offset += 2;
-+	}
-+
-+	if (reclen > size)
-+	    break;	/* should not happen, bad NVRAM */
-+
-+	switch (rectype) {
-+	    case ENV_TLV_TYPE_ENV:
-+		/* Read the TLV data */
-+		if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-+		    goto error;
-+		flg = *ptr++;
-+		envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-+		if (envval) {
-+		    *envval++ = '\0';
-+		    memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-+		    _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-+#if 0			
-+		    printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-+#endif
-+		    if(!strcmp(ptr, name)){
-+			return _valuestr;
-+		    }
-+		    if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-+			return _valuestr;
-+		}
-+		break;
-+		
-+	    default: 
-+		/* Unknown TLV type, skip it. */
-+		break;
-+	    }
-+
-+	/*
-+	 * Advance to next TLV 
-+	 */
-+		
-+	size -= (int)reclen;
-+	offset += reclen;
-+
-+	/* Read the next record type */
-+	ptr = buffer;
-+	if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-+	    goto error;
-+	}
-+
-+error:
-+    return NULL;
-+
-+}
-+
-diff -urN linux.old/arch/mips/bcm947xx/compressed/Makefile linux.dev/arch/mips/bcm947xx/compressed/Makefile
---- linux.old/arch/mips/bcm947xx/compressed/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/compressed/Makefile	2006-04-27 19:24:19.000000000 +0200
-@@ -0,0 +1,33 @@
-+#
-+# Makefile for Broadcom BCM947XX boards
-+#
-+# Copyright 2001-2003, Broadcom Corporation
-+# All Rights Reserved.
-+# 
-+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+#
-+# $Id: Makefile,v 1.2 2005/04/02 12:12:57 wbx Exp $
-+#
-+
-+OBJCOPY_ARGS	= -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
-+SYSTEM		?= $(TOPDIR)/vmlinux
-+
-+all: vmlinuz
-+
-+# Don't build dependencies, this may die if $(CC) isn't gcc
-+dep:
-+
-+# Create a gzipped version named vmlinuz for compatibility
-+vmlinuz: piggy
-+	gzip -c9 $< > $@
-+
-+piggy: $(SYSTEM)
-+	$(OBJCOPY) $(OBJCOPY_ARGS) $< $@
-+
-+mrproper: clean
-+
-+clean:
-+	rm -f vmlinuz piggy
-diff -urN linux.old/arch/mips/bcm947xx/export.c linux.dev/arch/mips/bcm947xx/export.c
---- linux.old/arch/mips/bcm947xx/export.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/export.c	2006-04-28 02:57:34.000000000 +0200
-@@ -0,0 +1,62 @@
-+#include <linux/module.h>
-+
-+#define _export(n) \
-+		void n(void); \
-+		EXPORT_SYMBOL(n);
-+
-+_export(bcm947xx_sbh)
-+
-+_export(sb_attach)
-+_export(sb_boardtype)
-+_export(sb_boardvendor)
-+_export(sb_btcgpiowar)
-+_export(sb_bus)
-+_export(sb_chip)
-+_export(sb_chiprev)
-+_export(sb_chipcrev)
-+_export(sb_chippkg)
-+_export(sb_clkctl_clk)
-+_export(sb_clkctl_fast_pwrup_delay)
-+_export(sb_clkctl_init)
-+_export(sb_clkctl_xtal)
-+_export(sb_core_disable)
-+_export(sb_core_reset)
-+_export(sb_core_tofixup)
-+_export(sb_coreflags)
-+_export(sb_coreflagshi)
-+_export(sb_coreidx)
-+_export(sb_corerev)
-+_export(sb_coreunit)
-+_export(sb_detach)
-+_export(sb_deviceremoved)
-+_export(sb_gpiocontrol)
-+_export(sb_gpioled)
-+_export(sb_gpioin)
-+_export(sb_gpioout)
-+_export(sb_gpioouten)
-+_export(sb_gpiotimerval)
-+_export(sb_iscoreup)
-+_export(sb_pci_setup)
-+_export(sb_pcirev)
-+_export(sb_pcmcia_init)
-+_export(sb_pcmciarev)
-+_export(sb_register_intr_callback)
-+_export(sb_setcore)
-+_export(sb_war16165)
-+_export(sb_osh)
-+		
-+_export(getvar)
-+_export(getintvar)
-+_export(bcm_strtoul)
-+_export(bcm_ctype)
-+_export(bcm_toupper)
-+_export(bcm_ether_ntoa)
-+
-+_export(nvram_get)
-+_export(nvram_getall)
-+_export(nvram_set)
-+_export(nvram_unset)
-+_export(nvram_commit)
-+
-+_export(srom_read)
-+_export(srom_write)
-diff -urN linux.old/arch/mips/bcm947xx/generic/Makefile linux.dev/arch/mips/bcm947xx/generic/Makefile
---- linux.old/arch/mips/bcm947xx/generic/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/generic/Makefile	2006-04-27 19:24:19.000000000 +0200
-@@ -0,0 +1,15 @@
-+#
-+# Makefile for the BCM947xx specific kernel interface routines
-+# under Linux.
-+#
-+
-+.S.s:
-+	$(CPP) $(AFLAGS) $< -o $*.s
-+.S.o:
-+	$(CC) $(AFLAGS) -c $< -o $*.o
-+
-+O_TARGET        := brcm.o
-+
-+obj-y	:= int-handler.o irq.o
-+
-+include $(TOPDIR)/Rules.make
-diff -urN linux.old/arch/mips/bcm947xx/generic/int-handler.S linux.dev/arch/mips/bcm947xx/generic/int-handler.S
---- linux.old/arch/mips/bcm947xx/generic/int-handler.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/generic/int-handler.S	2006-04-27 19:24:19.000000000 +0200
-@@ -0,0 +1,51 @@
-+/*
-+ * Generic interrupt handler for Broadcom MIPS boards
-+ *
-+ * Copyright 2004, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: int-handler.S,v 1.1 2005/03/16 13:50:00 wbx Exp $
-+ */
-+
-+#include <linux/config.h>
-+
-+#include <asm/asm.h>
-+#include <asm/mipsregs.h>
-+#include <asm/regdef.h>
-+#include <asm/stackframe.h>
-+
-+/*
-+ *	MIPS IRQ	Source
-+ *      --------        ------
-+ *             0	Software (ignored)
-+ *             1        Software (ignored)
-+ *             2        Combined hardware interrupt (hw0)
-+ *             3        Hardware
-+ *             4        Hardware
-+ *             5        Hardware
-+ *             6        Hardware
-+ *             7        R4k timer
-+ */
-+
-+	.text
-+	.set	noreorder
-+	.set	noat
-+	.align	5
-+	NESTED(brcmIRQ, PT_SIZE, sp)
-+	SAVE_ALL
-+	CLI
-+	.set	at
-+    .set    noreorder
-+
-+	jal	    brcm_irq_dispatch
-+	 move	a0, sp
-+
-+	j	    ret_from_irq
-+	 nop
-+		
-+	END(brcmIRQ)
-diff -urN linux.old/arch/mips/bcm947xx/generic/irq.c linux.dev/arch/mips/bcm947xx/generic/irq.c
---- linux.old/arch/mips/bcm947xx/generic/irq.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/generic/irq.c	2006-04-27 19:24:19.000000000 +0200
-@@ -0,0 +1,130 @@
-+/*
-+ * Generic interrupt control functions for Broadcom MIPS boards
-+ *
-+ * Copyright 2004, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: irq.c,v 1.1 2005/03/16 13:50:00 wbx Exp $
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+
-+#include <asm/irq.h>
-+#include <asm/mipsregs.h>
-+#include <asm/gdb-stub.h>
-+
-+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
-+
-+extern asmlinkage void brcmIRQ(void);
-+extern asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs);
-+
-+void
-+brcm_irq_dispatch(struct pt_regs *regs)
-+{
-+	u32 cause;
-+
-+	cause = read_c0_cause() &
-+		read_c0_status() &
-+		CAUSEF_IP;
-+
-+#ifdef CONFIG_KERNPROF
-+	change_c0_status(cause | 1, 1);
-+#else
-+	clear_c0_status(cause);
-+#endif
-+
-+	if (cause & CAUSEF_IP7)
-+		do_IRQ(7, regs);
-+	if (cause & CAUSEF_IP2)
-+		do_IRQ(2, regs);
-+	if (cause & CAUSEF_IP3)
-+		do_IRQ(3, regs);
-+	if (cause & CAUSEF_IP4)
-+		do_IRQ(4, regs);
-+	if (cause & CAUSEF_IP5)
-+		do_IRQ(5, regs);
-+	if (cause & CAUSEF_IP6)
-+		do_IRQ(6, regs);
-+}
-+
-+static void
-+enable_brcm_irq(unsigned int irq)
-+{
-+	if (irq < 8)
-+		set_c0_status(1 << (irq + 8));
-+	else
-+		set_c0_status(IE_IRQ0);
-+}
-+
-+static void
-+disable_brcm_irq(unsigned int irq)
-+{
-+	if (irq < 8)
-+		clear_c0_status(1 << (irq + 8));
-+	else
-+		clear_c0_status(IE_IRQ0);
-+}
-+
-+static void
-+ack_brcm_irq(unsigned int irq)
-+{
-+	/* Already done in brcm_irq_dispatch */
-+}
-+
-+static unsigned int
-+startup_brcm_irq(unsigned int irq)
-+{ 
-+	enable_brcm_irq(irq);
-+
-+	return 0; /* never anything pending */
-+}
-+
-+static void
-+end_brcm_irq(unsigned int irq)
-+{
-+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-+		enable_brcm_irq(irq);
-+}
-+
-+static struct hw_interrupt_type brcm_irq_type = {
-+	typename: "MIPS",
-+	startup: startup_brcm_irq,
-+	shutdown: disable_brcm_irq,
-+	enable: enable_brcm_irq,
-+	disable: disable_brcm_irq,
-+	ack: ack_brcm_irq,
-+	end: end_brcm_irq,
-+	NULL
-+};
-+
-+void __init
-+init_IRQ(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < NR_IRQS; i++) {
-+		irq_desc[i].status = IRQ_DISABLED;
-+		irq_desc[i].action = 0;
-+		irq_desc[i].depth = 1;
-+		irq_desc[i].handler = &brcm_irq_type;
-+	}
-+
-+    	set_except_vector(0, brcmIRQ);
-+	change_c0_status(ST0_IM, ALLINTS);
-+
-+#ifdef CONFIG_REMOTE_DEBUG
-+	printk("Breaking into debugger...\n");
-+	set_debug_traps();
-+	breakpoint(); 
-+#endif
-+}
-diff -urN linux.old/arch/mips/bcm947xx/gpio.c linux.dev/arch/mips/bcm947xx/gpio.c
---- linux.old/arch/mips/bcm947xx/gpio.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/gpio.c	2006-04-27 23:09:33.000000000 +0200
-@@ -0,0 +1,159 @@
-+/*
-+ * GPIO char driver
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/miscdevice.h>
-+#include <asm/uaccess.h>
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <sbutils.h>
-+#include <bcmdevs.h>
-+
-+static sb_t *gpio_sbh;
-+static int gpio_major;
-+static devfs_handle_t gpio_dir;
-+static struct {
-+	char *name;
-+	devfs_handle_t handle;
-+} gpio_file[] = {
-+	{ "in", NULL },
-+	{ "out", NULL },
-+	{ "outen", NULL },
-+	{ "control", NULL }
-+};
-+
-+static int
-+gpio_open(struct inode *inode, struct file * file)
-+{
-+	if (MINOR(inode->i_rdev) > ARRAYSIZE(gpio_file))
-+		return -ENODEV;
-+
-+	MOD_INC_USE_COUNT;
-+	return 0;
-+}
-+
-+static int
-+gpio_release(struct inode *inode, struct file * file)
-+{
-+	MOD_DEC_USE_COUNT;
-+	return 0;
-+}
-+
-+static ssize_t
-+gpio_read(struct file *file, char *buf, size_t count, loff_t *ppos)
-+{
-+	u32 val;
-+
-+	switch (MINOR(file->f_dentry->d_inode->i_rdev)) {
-+	case 0:
-+		val = sb_gpioin(gpio_sbh);
-+		break;
-+	case 1:
-+		val = sb_gpioout(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
-+		break;
-+	case 2:
-+		val = sb_gpioouten(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
-+		break;
-+	case 3:
-+		val = sb_gpiocontrol(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
-+		break;
-+	default:
-+		return -ENODEV;
-+	}
-+
-+	if (put_user(val, (u32 *) buf))
-+		return -EFAULT;
-+
-+	return sizeof(val);
-+}
-+
-+static ssize_t
-+gpio_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
-+{
-+	u32 val;
-+
-+	if (get_user(val, (u32 *) buf))
-+		return -EFAULT;
-+
-+	switch (MINOR(file->f_dentry->d_inode->i_rdev)) {
-+	case 0:
-+		return -EACCES;
-+	case 1:
-+		sb_gpioout(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
-+		break;
-+	case 2:
-+		sb_gpioouten(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
-+		break;
-+	case 3:
-+		sb_gpiocontrol(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
-+		break;
-+	default:
-+		return -ENODEV;
-+	}
-+
-+	return sizeof(val);
-+}
-+
-+static struct file_operations gpio_fops = {
-+	owner:		THIS_MODULE,
-+	open:		gpio_open,
-+	release:	gpio_release,
-+	read:		gpio_read,
-+	write:		gpio_write,
-+};
-+
-+static int __init
-+gpio_init(void)
-+{
-+	int i;
-+
-+	if (!(gpio_sbh = sb_kattach()))
-+		return -ENODEV;
-+
-+	sb_gpiosetcore(gpio_sbh);
-+
-+	if ((gpio_major = devfs_register_chrdev(0, "gpio", &gpio_fops)) < 0)
-+		return gpio_major;
-+
-+	gpio_dir = devfs_mk_dir(NULL, "gpio", NULL);
-+
-+	for (i = 0; i < ARRAYSIZE(gpio_file); i++) {
-+		gpio_file[i].handle = devfs_register(gpio_dir,
-+						     gpio_file[i].name,
-+						     DEVFS_FL_DEFAULT, gpio_major, i,
-+						     S_IFCHR | S_IRUGO | S_IWUGO,
-+						     &gpio_fops, NULL);
-+	}
-+
-+	return 0;
-+}
-+
-+static void __exit
-+gpio_exit(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAYSIZE(gpio_file); i++)
-+		devfs_unregister(gpio_file[i].handle);
-+	devfs_unregister(gpio_dir);
-+	devfs_unregister_chrdev(gpio_major, "gpio");
-+	sb_detach(gpio_sbh);
-+}
-+
-+module_init(gpio_init);
-+module_exit(gpio_exit);
-diff -urN linux.old/arch/mips/bcm947xx/hndchipc.c linux.dev/arch/mips/bcm947xx/hndchipc.c
---- linux.old/arch/mips/bcm947xx/hndchipc.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/hndchipc.c	2006-04-28 00:33:05.000000000 +0200
-@@ -0,0 +1,158 @@
-+/*
-+ * BCM47XX support code for some chipcommon (old extif) facilities (uart)
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: hndchipc.c,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#include <typedefs.h>
-+#include <bcmdefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <sbutils.h>
-+#include <bcmdevs.h>
-+#include <bcmnvram.h>
-+#include <sbconfig.h>
-+#include <sbextif.h>
-+#include <sbchipc.h>
-+#include <hndcpu.h>
-+
-+/*
-+ * Returns TRUE if an external UART exists at the given base
-+ * register.
-+ */
-+static bool
-+BCMINITFN(serial_exists)(osl_t *osh, uint8 *regs)
-+{
-+	uint8 save_mcr, status1;
-+
-+	save_mcr = R_REG(osh, &regs[UART_MCR]);
-+	W_REG(osh, &regs[UART_MCR], UART_MCR_LOOP | 0x0a);
-+	status1 = R_REG(osh, &regs[UART_MSR]) & 0xf0;
-+	W_REG(osh, &regs[UART_MCR], save_mcr);
-+
-+	return (status1 == 0x90);
-+}
-+
-+/*
-+ * Initializes UART access. The callback function will be called once
-+ * per found UART.
-+ */
-+void
-+BCMINITFN(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base,
-+                                                 uint reg_shift))
-+{
-+	osl_t *osh;
-+	void *regs;
-+	ulong base;
-+	uint irq;
-+	int i, n;
-+
-+	osh = sb_osh(sbh);
-+
-+	if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) {
-+		extifregs_t *eir = (extifregs_t *) regs;
-+		sbconfig_t *sb;
-+
-+		/* Determine external UART register base */
-+		sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
-+		base = EXTIF_CFGIF_BASE(sb_base(R_REG(osh, &sb->sbadmatch1)));
-+
-+		/* Determine IRQ */
-+		irq = sb_irq(sbh);
-+
-+		/* Disable GPIO interrupt initially */
-+		W_REG(osh, &eir->gpiointpolarity, 0);
-+		W_REG(osh, &eir->gpiointmask, 0);
-+
-+		/* Search for external UARTs */
-+		n = 2;
-+		for (i = 0; i < 2; i++) {
-+			regs = (void *) REG_MAP(base + (i * 8), 8);
-+			if (serial_exists(osh, regs)) {
-+				/* Set GPIO 1 to be the external UART IRQ */
-+				W_REG(osh, &eir->gpiointmask, 2);
-+				/* XXXDetermine external UART clock */
-+				if (add)
-+					add(regs, irq, 13500000, 0);
-+			}
-+		}
-+
-+		/* Add internal UART if enabled */
-+		if (R_REG(osh, &eir->corecontrol) & CC_UE)
-+			if (add)
-+				add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
-+	} else if ((regs = sb_setcore(sbh, SB_CC, 0))) {
-+		chipcregs_t *cc = (chipcregs_t *) regs;
-+		uint32 rev, cap, pll, baud_base, div;
-+
-+		/* Determine core revision and capabilities */
-+		rev = sb_corerev(sbh);
-+		cap = R_REG(osh, &cc->capabilities);
-+		pll = cap & CAP_PLL_MASK;
-+
-+		/* Determine IRQ */
-+		irq = sb_irq(sbh);
-+
-+		if (pll == PLL_TYPE1) {
-+			/* PLL clock */
-+			baud_base = sb_clock_rate(pll,
-+			                          R_REG(osh, &cc->clockcontrol_n),
-+			                          R_REG(osh, &cc->clockcontrol_m2));
-+			div = 1;
-+		} else {
-+			/* Fixed ALP clock */
-+			if (rev >= 11 && rev != 15) {
-+				baud_base = 20000000;
-+				div = 1;
-+				/* Set the override bit so we don't divide it */
-+				W_REG(osh, &cc->corecontrol, CC_UARTCLKO);
-+			}
-+			/* Internal backplane clock */
-+			else if (rev >= 3) {
-+				baud_base = sb_clock(sbh);
-+				div = 2;	/* Minimum divisor */
-+				W_REG(osh, &cc->clkdiv,
-+				      ((R_REG(osh, &cc->clkdiv) & ~CLKD_UART) | div));
-+			}
-+			/* Fixed internal backplane clock */
-+			else {
-+				baud_base = 88000000;
-+				div = 48;
-+			}
-+
-+			/* Clock source depends on strapping if UartClkOverride is unset */
-+			if ((rev > 0) &&
-+			    ((R_REG(osh, &cc->corecontrol) & CC_UARTCLKO) == 0)) {
-+				if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) {
-+					/* Internal divided backplane clock */
-+					baud_base /= div;
-+				} else {
-+					/* Assume external clock of 1.8432 MHz */
-+					baud_base = 1843200;
-+				}
-+			}
-+		}
-+
-+		/* Add internal UARTs */
-+		n = cap & CAP_UARTS_MASK;
-+		for (i = 0; i < n; i++) {
-+			/* Register offset changed after revision 0 */
-+			if (rev)
-+				regs = (void *)((ulong) &cc->uart0data + (i * 256));
-+			else
-+				regs = (void *)((ulong) &cc->uart0data + (i * 8));
-+
-+			if (add)
-+				add(regs, irq, baud_base, 0);
-+		}
-+	}
-+}
-+
-diff -urN linux.old/arch/mips/bcm947xx/include/bcm4710.h linux.dev/arch/mips/bcm947xx/include/bcm4710.h
---- linux.old/arch/mips/bcm947xx/include/bcm4710.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcm4710.h	2006-04-27 22:30:01.000000000 +0200
-@@ -0,0 +1,91 @@
-+/*
-+ * BCM4710 address space map and definitions
-+ * Think twice before adding to this file, this is not the kitchen sink
-+ * These definitions are not guaranteed for all 47xx chips, only the 4710
-+ *
-+ * Copyright 2004, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ *
-+ * $Id: bcm4710.h,v 1.3 2004/09/27 07:23:30 tallest Exp $
-+ */
-+
-+#ifndef _bcm4710_h_
-+#define _bcm4710_h_
-+
-+/* Address map */
-+#define BCM4710_SDRAM		0x00000000	/* Physical SDRAM */
-+#define BCM4710_PCI_MEM		0x08000000	/* Host Mode PCI memory access space (64 MB) */
-+#define BCM4710_PCI_CFG		0x0c000000	/* Host Mode PCI configuration space (64 MB) */
-+#define BCM4710_PCI_DMA		0x40000000	/* Client Mode PCI memory access space (1 GB) */
-+#define	BCM4710_SDRAM_SWAPPED	0x10000000	/* Byteswapped Physical SDRAM */
-+#define BCM4710_ENUM		0x18000000	/* Beginning of core enumeration space */
-+
-+/* Core register space */
-+#define BCM4710_REG_SDRAM	0x18000000	/* SDRAM core registers */
-+#define BCM4710_REG_ILINE20	0x18001000	/* InsideLine20 core registers */
-+#define BCM4710_REG_EMAC0	0x18002000	/* Ethernet MAC 0 core registers */
-+#define BCM4710_REG_CODEC	0x18003000	/* Codec core registers */
-+#define BCM4710_REG_USB		0x18004000	/* USB core registers */
-+#define BCM4710_REG_PCI		0x18005000	/* PCI core registers */
-+#define BCM4710_REG_MIPS	0x18006000	/* MIPS core registers */
-+#define BCM4710_REG_EXTIF	0x18007000	/* External Interface core registers */
-+#define BCM4710_REG_EMAC1	0x18008000	/* Ethernet MAC 1 core registers */
-+
-+#define	BCM4710_EXTIF		0x1f000000	/* External Interface base address */
-+#define BCM4710_PCMCIA_MEM	0x1f000000	/* External Interface PCMCIA memory access */
-+#define BCM4710_PCMCIA_IO	0x1f100000	/* PCMCIA I/O access */
-+#define BCM4710_PCMCIA_CONF	0x1f200000	/* PCMCIA configuration */
-+#define BCM4710_PROG		0x1f800000	/* Programable interface */
-+#define BCM4710_FLASH		0x1fc00000	/* Flash */
-+
-+#define	BCM4710_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
-+
-+#define	BCM4710_UART		(BCM4710_REG_EXTIF + 0x00000300)
-+
-+#define	BCM4710_EUART		(BCM4710_EXTIF + 0x00800000)
-+#define	BCM4710_LED		(BCM4710_EXTIF + 0x00900000)
-+
-+#define	SBFLAG_PCI	0
-+#define	SBFLAG_ENET0	1
-+#define	SBFLAG_ILINE20	2
-+#define	SBFLAG_CODEC	3
-+#define	SBFLAG_USB	4
-+#define	SBFLAG_EXTIF	5
-+#define	SBFLAG_ENET1	6
-+
-+#ifdef	CONFIG_HWSIM
-+#define	BCM4710_TRACE(trval)        do { *((int *)0xa0000f18) = (trval); } while (0)
-+#else
-+#define	BCM4710_TRACE(trval)
-+#endif
-+
-+
-+/* BCM94702 CPCI -ExtIF used for LocalBus devs */
-+
-+#define BCM94702_CPCI_RESET_ADDR    	 BCM4710_EXTIF
-+#define BCM94702_CPCI_BOARDID_ADDR  	(BCM4710_EXTIF | 0x4000)
-+#define BCM94702_CPCI_DOC_ADDR      	(BCM4710_EXTIF | 0x6000)
-+#define BCM94702_DOC_ADDR                BCM94702_CPCI_DOC_ADDR
-+#define BCM94702_CPCI_LED_ADDR      	(BCM4710_EXTIF | 0xc000)
-+#define BCM94702_CPCI_NVRAM_ADDR    	(BCM4710_EXTIF | 0xe000)
-+#define BCM94702_CPCI_NVRAM_SIZE         0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/
-+#define BCM94702_CPCI_TOD_REG_BASE       (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0)
-+
-+#define LED_REG(x)      \
-+ (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x)))
-+
-+/* 
-+ * Reset function implemented in PLD.  Read or write should trigger hard reset 
-+ */
-+#define SYS_HARD_RESET()   \
-+    { for (;;) \
-+     *( (volatile unsigned char *)\
-+      KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \
-+    }
-+
-+#endif /* _bcm4710_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/bcmdefs.h linux.dev/arch/mips/bcm947xx/include/bcmdefs.h
---- linux.old/arch/mips/bcm947xx/include/bcmdefs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmdefs.h	2006-04-27 20:12:21.000000000 +0200
-@@ -0,0 +1,106 @@
-+/*
-+ * Misc system wide definitions
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: bcmdefs.h,v 1.1.1.3 2006/04/08 06:13:39 honor Exp $
-+ */
-+
-+#ifndef	_bcmdefs_h_
-+#define	_bcmdefs_h_
-+
-+/*
-+ * One doesn't need to include this file explicitly, gets included automatically if
-+ * typedefs.h is included.
-+ */
-+
-+/* Reclaiming text and data :
-+ * The following macros specify special linker sections that can be reclaimed
-+ * after a system is considered 'up'.
-+ */
-+#if defined(__GNUC__) && defined(BCMRECLAIM)
-+extern bool	bcmreclaimed;
-+#define BCMINITDATA(_data)	__attribute__ ((__section__ (".dataini." #_data))) _data
-+#define BCMINITFN(_fn)		__attribute__ ((__section__ (".textini." #_fn))) _fn
-+#else /* #if defined(__GNUC__) && defined(BCMRECLAIM) */
-+#define BCMINITDATA(_data)	_data
-+#define BCMINITFN(_fn)		_fn
-+#define bcmreclaimed		0
-+#endif /* #if defined(__GNUC__) && defined(BCMRECLAIM) */
-+
-+/* Reclaim uninit functions if BCMNODOWN is defined		*/
-+/* and if they are not already removed by -gc-sections	*/
-+#ifdef BCMNODOWN
-+#define BCMUNINITFN(_fn)		BCMINITFN(_fn)
-+#else
-+#define BCMUNINITFN(_fn)		_fn
-+#endif
-+
-+#ifdef BCMRECLAIM
-+#define CONST
-+#else
-+#define CONST	const
-+#endif /* BCMRECLAIM */
-+
-+/* Compatibility with old-style BCMRECLAIM */
-+#define BCMINIT(_id)		_id
-+
-+
-+/* Put some library data/code into ROM to reduce RAM requirements */
-+#if defined(__GNUC__) && defined(BCMROMOFFLOAD)
-+#define BCMROMDATA(_data)	__attribute__ ((__section__ (".datarom." #_data))) _data
-+#define BCMROMFN(_fn)		__attribute__ ((__section__ (".textrom." #_fn))) _fn
-+#else
-+#define BCMROMDATA(_data)	_data
-+#define BCMROMFN(_fn)		_fn
-+#endif
-+
-+/* Bus types */
-+#define	SB_BUS			0	/* Silicon Backplane */
-+#define	PCI_BUS			1	/* PCI target */
-+#define	PCMCIA_BUS		2	/* PCMCIA target */
-+#define SDIO_BUS		3	/* SDIO target */
-+#define JTAG_BUS		4	/* JTAG */
-+#define NO_BUS			0xFF	/* Bus that does not support R/W REG */
-+
-+/* Allows optimization for single-bus support */
-+#ifdef BCMBUSTYPE
-+#define BUSTYPE(bus) (BCMBUSTYPE)
-+#else
-+#define BUSTYPE(bus) (bus)
-+#endif
-+
-+/* Defines for DMA Address Width - Shared between OSL and HNDDMA */
-+#define DMADDR_MASK_32 0x0		/* Address mask for 32-bits */
-+#define DMADDR_MASK_30 0xc0000000	/* Address mask for 30-bits */
-+#define DMADDR_MASK_0  0xffffffff	/* Address mask for 0-bits (hi-part) */
-+
-+#define	DMADDRWIDTH_30  30 /* 30-bit addressing capability */
-+#define	DMADDRWIDTH_32  32 /* 32-bit addressing capability */
-+#define	DMADDRWIDTH_63  63 /* 64-bit addressing capability */
-+#define	DMADDRWIDTH_64  64 /* 64-bit addressing capability */
-+
-+/* packet headroom necessary to accomodate the largest header in the system, (i.e TXOFF).
-+ * By doing, we avoid the need  to allocate an extra buffer for the header when bridging to WL.
-+ * There is a compile time check in wlc.c which ensure that this value is at least as big
-+ * as TXOFF. This value is used in dma_rxfill (hnddma.c).
-+ */
-+#define BCMEXTRAHDROOM 160
-+
-+/* Headroom required for dongle-to-host communication.  Packets allocated
-+ * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should
-+ * leave this much room in front for low-level message headers which may
-+ * be needed to get across the dongle bus to the host.  (These messages
-+ * don't go over the network, so room for the full WL header above would
-+ * be a waste.)
-+ */
-+#define BCMDONGLEHDRSZ 8
-+
-+
-+
-+#endif /* _bcmdefs_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs.h linux.dev/arch/mips/bcm947xx/include/bcmdevs.h
---- linux.old/arch/mips/bcm947xx/include/bcmdevs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmdevs.h	2006-04-27 22:30:25.000000000 +0200
-@@ -0,0 +1,369 @@
-+/*
-+ * Broadcom device-specific manifest constants.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: bcmdevs.h,v 1.1.1.17 2006/04/15 01:29:08 michael Exp $
-+ */
-+
-+#ifndef	_BCMDEVS_H
-+#define	_BCMDEVS_H
-+
-+#include "bcm4710.h"
-+
-+/* Known PCI vendor Id's */
-+#define	VENDOR_EPIGRAM		0xfeda
-+#define	VENDOR_BROADCOM		0x14e4
-+#define	VENDOR_3COM		0x10b7
-+#define	VENDOR_NETGEAR		0x1385
-+#define	VENDOR_DIAMOND		0x1092
-+#define	VENDOR_DELL		0x1028
-+#define	VENDOR_HP		0x0e11
-+#define	VENDOR_APPLE		0x106b
-+
-+/* PCI Device Id's */
-+#define	BCM4210_DEVICE_ID	0x1072		/* never used */
-+#define	BCM4211_DEVICE_ID	0x4211
-+#define	BCM4230_DEVICE_ID	0x1086		/* never used */
-+#define	BCM4231_DEVICE_ID	0x4231
-+
-+#define	BCM4410_DEVICE_ID	0x4410		/* bcm44xx family pci iline */
-+#define	BCM4430_DEVICE_ID	0x4430		/* bcm44xx family cardbus iline */
-+#define	BCM4412_DEVICE_ID	0x4412		/* bcm44xx family pci enet */
-+#define	BCM4432_DEVICE_ID	0x4432		/* bcm44xx family cardbus enet */
-+
-+#define	BCM3352_DEVICE_ID	0x3352		/* bcm3352 device id */
-+#define	BCM3360_DEVICE_ID	0x3360		/* bcm3360 device id */
-+
-+#define	EPI41210_DEVICE_ID	0xa0fa		/* bcm4210 */
-+#define	EPI41230_DEVICE_ID	0xa10e		/* bcm4230 */
-+
-+#define	BCM47XX_ILINE_ID	0x4711		/* 47xx iline20 */
-+#define	BCM47XX_V90_ID		0x4712		/* 47xx v90 codec */
-+#define	BCM47XX_ENET_ID		0x4713		/* 47xx enet */
-+#define	BCM47XX_EXT_ID		0x4714		/* 47xx external i/f */
-+#define	BCM47XX_USB_ID		0x4715		/* 47xx usb */
-+#define	BCM47XX_USBH_ID		0x4716		/* 47xx usb host */
-+#define	BCM47XX_USBD_ID		0x4717		/* 47xx usb device */
-+#define	BCM47XX_IPSEC_ID	0x4718		/* 47xx ipsec */
-+#define	BCM47XX_ROBO_ID		0x4719		/* 47xx/53xx roboswitch core */
-+#define	BCM47XX_USB20H_ID	0x471a		/* 47xx usb 2.0 host */
-+#define	BCM47XX_USB20D_ID	0x471b		/* 47xx usb 2.0 device */
-+#define	BCM47XX_ATA100_ID	0x471d		/* 47xx parallel ATA */
-+#define	BCM47XX_SATAXOR_ID	0x471e		/* 47xx serial ATA & XOR DMA */
-+#define	BCM47XX_GIGETH_ID	0x471f		/* 47xx GbE (5700) */
-+
-+#define BCM47XX_SMBUS_EMU_ID	0x47fe		/* 47xx emulated SMBus device */
-+#define	BCM47XX_XOR_EMU_ID	0x47ff		/* 47xx emulated XOR engine */
-+
-+#define	BCM4710_CHIP_ID		0x4710		/* 4710 chipid returned by sb_chip() */
-+#define	BCM4710_DEVICE_ID	0x4710		/* 4710 primary function 0 */
-+
-+#define	BCM4402_CHIP_ID		0x4402		/* 4402 chipid */
-+#define	BCM4402_ENET_ID		0x4402		/* 4402 enet */
-+#define	BCM4402_V90_ID		0x4403		/* 4402 v90 codec */
-+#define	BCM4401_ENET_ID		0x170c		/* 4401b0 production enet cards */
-+
-+#define	BCM4306_CHIP_ID		0x4306		/* 4306 chipcommon chipid */
-+#define	BCM4306_D11G_ID		0x4320		/* 4306 802.11g */
-+#define	BCM4306_D11G_ID2	0x4325		
-+#define	BCM4306_D11A_ID		0x4321		/* 4306 802.11a */
-+#define	BCM4306_UART_ID		0x4322		/* 4306 uart */
-+#define	BCM4306_V90_ID		0x4323		/* 4306 v90 codec */
-+#define	BCM4306_D11DUAL_ID	0x4324		/* 4306 dual A+B */
-+
-+#define	BCM4309_PKG_ID		1		/* 4309 package id */
-+
-+#define	BCM4311_CHIP_ID		0x4311		/* 4311 PCIe 802.11a/b/g */
-+#define	BCM4311_D11G_ID		0x4311		/* 4311 802.11b/g id */
-+#define	BCM4311_D11DUAL_ID	0x4312		/* 4311 802.11a/b/g id */
-+#define	BCM4311_D11A_ID		0x4313		/* 4311 802.11a id */
-+
-+#define	BCM4303_D11B_ID		0x4303		/* 4303 802.11b */
-+#define	BCM4303_PKG_ID		2		/* 4303 package id */
-+
-+#define	BCMGPRS_UART_ID		0x4333		/* Uart id used by 4306/gprs card */
-+#define	BCMGPRS2_UART_ID	0x4344		/* Uart id used by 4306/gprs card */
-+
-+#define	BCM4704_CHIP_ID		0x4704		/* 4704 chipcommon chipid */
-+#define	BCM4704_ENET_ID		0x4706		/* 4704 enet (Use 47XX_ENET_ID instead!) */
-+
-+#define	BCM4318_CHIP_ID		0x4318		/* 4318 chip common chipid */
-+#define	BCM4318_D11G_ID		0x4318		/* 4318 802.11b/g id */
-+#define	BCM4318_D11DUAL_ID	0x4319		/* 4318 802.11a/b/g id */
-+#define	BCM4318_D11A_ID		0x431a		/* 4318 802.11a id */
-+
-+#define	BCM4321_CHIP_ID		0x4321		/* 4321 chip common chipid */
-+#define	BCM4321_D11N_ID		0x4328		/* 4321 802.11n dualband id */
-+#define	BCM4321_D11N2G_ID	0x4329		/* 4321 802.11n 2.4Hgz band id */
-+#define	BCM4321_D11N5G_ID	0x432a		/* 4321 802.11n 5Ghz band id */
-+
-+#define BCM4331_CHIP_ID		0x4331		/* 4331 chip common chipid */
-+#define BCM4331_D11N2G_ID	0x4330		/* 4331 802.11n 2.4Ghz band id */
-+#define BCM4331_D11N_ID		0x4331		/* 4331 802.11n dualband id */
-+#define BCM4331_D11N5G_ID	0x4332		/* 4331 802.11n 5Ghz band id */
-+
-+#define HDLSIM5350_PKG_ID	1		/* HDL simulator package id for a 5350 */
-+#define HDLSIM_PKG_ID		14		/* HDL simulator package id */
-+#define HWSIM_PKG_ID		15		/* Hardware simulator package id */
-+
-+#define	BCM4712_CHIP_ID		0x4712		/* 4712 chipcommon chipid */
-+#define	BCM4712_MIPS_ID		0x4720		/* 4712 base devid */
-+#define	BCM4712LARGE_PKG_ID	0		/* 340pin 4712 package id */
-+#define	BCM4712SMALL_PKG_ID	1		/* 200pin 4712 package id */
-+#define	BCM4712MID_PKG_ID	2		/* 225pin 4712 package id */
-+
-+#define BCM5365_CHIP_ID		0x5365          /* 5365 chipcommon chipid */
-+#define	BCM5350_CHIP_ID		0x5350		/* bcm5350 chipcommon chipid */
-+#define	BCM5352_CHIP_ID		0x5352		/* bcm5352 chipcommon chipid */
-+
-+#define	BCM4320_CHIP_ID		0x4320		/* bcm4320 chipcommon chipid */
-+
-+#define BCM4328_CHIP_ID		0x4328		/* bcm4328 chipcommon chipid */
-+
-+#define FPGA_JTAGM_ID		0x43f0		/* FPGA jtagm device id */
-+#define BCM43XX_JTAGM_ID	0x43f1		/* 43xx jtagm device id */
-+#define BCM43XXOLD_JTAGM_ID	0x4331		/* 43xx old jtagm device id */
-+
-+#define SDIOH_FPGA_ID		0x43f2		/* sdio host fpga */
-+#define SDIOD_FPGA_ID		0x43f4		/* sdio device fpga */
-+
-+#define MIMO_FPGA_ID		0x43f8		/* FPGA mimo minimacphy device id */
-+
-+#define BCM4785_CHIP_ID		0x4785		/* 4785 chipcommon chipid */
-+
-+/* PCMCIA vendor Id's */
-+
-+#define	VENDOR_BROADCOM_PCMCIA	0x02d0
-+
-+/* SDIO vendor Id's */
-+#define	VENDOR_BROADCOM_SDIO	0x00BF
-+
-+
-+/* boardflags */
-+#define	BFL_BTCOEXIST		0x0001	/* This board implements Bluetooth coexistance */
-+#define	BFL_PACTRL		0x0002	/* This board has gpio 9 controlling the PA */
-+#define	BFL_AIRLINEMODE		0x0004	/* This board implements gpio13 radio disable indication */
-+#define	BFL_ENETROBO		0x0010	/* This board has robo switch or core */
-+#define	BFL_CCKHIPWR		0x0040	/* Can do high-power CCK transmission */
-+#define	BFL_ENETADM		0x0080	/* This board has ADMtek switch */
-+#define	BFL_ENETVLAN		0x0100	/* This board has vlan capability */
-+#define	BFL_AFTERBURNER		0x0200	/* This board supports Afterburner mode */
-+#define BFL_NOPCI		0x0400	/* This board leaves PCI floating */
-+#define BFL_FEM			0x0800  /* This board supports the Front End Module */
-+#define BFL_EXTLNA		0x1000	/* This board has an external LNA */
-+#define BFL_HGPA		0x2000	/* This board has a high gain PA */
-+#define	BFL_BTCMOD		0x4000	/* This board' BTCOEXIST is in the alternate gpios */
-+#define	BFL_ALTIQ		0x8000	/* Alternate I/Q settings */
-+
-+/* boardflags2 */
-+#define BFL2_RXBB_INT_REG_DIS	0x00000001	/* This board has an external rxbb regulator */
-+#define BFL2_SSWITCH_AVAIL	0x00000002	/* This board has a superswitch for > 2 antennas */
-+#define BFL2_TXPWRCTRL_EN	0x00000004	/* This board permits TX Power Control to be enabled */
-+
-+/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
-+#define	BOARD_GPIO_BTCMOD_IN	0x010	/* bit 4 is the alternate BT Coexistance Input */
-+#define	BOARD_GPIO_BTCMOD_OUT	0x020	/* bit 5 is the alternate BT Coexistance Out */
-+#define	BOARD_GPIO_BTC_IN	0x080	/* bit 7 is BT Coexistance Input */
-+#define	BOARD_GPIO_BTC_OUT	0x100	/* bit 8 is BT Coexistance Out */
-+#define	BOARD_GPIO_PACTRL	0x200	/* bit 9 controls the PA on new 4306 boards */
-+#define	PCI_CFG_GPIO_SCS	0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
-+#define PCI_CFG_GPIO_HWRAD	0x20	/* PCI config space GPIO 13 for hw radio disable */
-+#define PCI_CFG_GPIO_XTAL	0x40	/* PCI config space GPIO 14 for Xtal powerup */
-+#define PCI_CFG_GPIO_PLL	0x80	/* PCI config space GPIO 15 for PLL powerdown */
-+
-+/* power control defines */
-+#define PLL_DELAY		150		/* us pll on delay */
-+#define FREF_DELAY		200		/* us fref change delay */
-+#define MIN_SLOW_CLK		32		/* us Slow clock period */
-+#define	XTAL_ON_DELAY		1000		/* us crystal power-on delay */
-+
-+/* Reference Board Types */
-+
-+#define	BU4710_BOARD		0x0400
-+#define	VSIM4710_BOARD		0x0401
-+#define	QT4710_BOARD		0x0402
-+
-+#define	BU4309_BOARD		0x040a
-+#define	BCM94309CB_BOARD	0x040b
-+#define	BCM94309MP_BOARD	0x040c
-+#define	BCM4309AP_BOARD		0x040d
-+
-+#define	BCM94302MP_BOARD	0x040e
-+
-+#define	BU4306_BOARD		0x0416
-+#define	BCM94306CB_BOARD	0x0417
-+#define	BCM94306MP_BOARD	0x0418
-+
-+#define	BCM94710D_BOARD		0x041a
-+#define	BCM94710R1_BOARD	0x041b
-+#define	BCM94710R4_BOARD	0x041c
-+#define	BCM94710AP_BOARD	0x041d
-+
-+#define	BU2050_BOARD		0x041f
-+
-+
-+#define	BCM94309G_BOARD		0x0421
-+
-+#define	BU4704_BOARD		0x0423
-+#define	BU4702_BOARD		0x0424
-+
-+#define	BCM94306PC_BOARD	0x0425		/* pcmcia 3.3v 4306 card */
-+
-+
-+#define	BCM94702MN_BOARD	0x0428
-+
-+/* BCM4702 1U CompactPCI Board */
-+#define	BCM94702CPCI_BOARD	0x0429
-+
-+/* BCM4702 with BCM95380 VLAN Router */
-+#define	BCM95380RR_BOARD	0x042a
-+
-+/* cb4306 with SiGe PA */
-+#define	BCM94306CBSG_BOARD	0x042b
-+
-+/* cb4306 with SiGe PA */
-+#define	PCSG94306_BOARD		0x042d
-+
-+/* bu4704 with sdram */
-+#define	BU4704SD_BOARD		0x042e
-+
-+/* Dual 11a/11g Router */
-+#define	BCM94704AGR_BOARD	0x042f
-+
-+/* 11a-only minipci */
-+#define	BCM94308MP_BOARD	0x0430
-+
-+
-+
-+#define BU4712_BOARD		0x0444
-+#define	BU4712SD_BOARD		0x045d
-+#define	BU4712L_BOARD		0x045f
-+
-+/* BCM4712 boards */
-+#define BCM94712AP_BOARD	0x0445
-+#define BCM94712P_BOARD		0x0446
-+
-+/* BCM4318 boards */
-+#define BU4318_BOARD		0x0447
-+#define CB4318_BOARD		0x0448
-+#define MPG4318_BOARD		0x0449
-+#define MP4318_BOARD		0x044a
-+#define SD4318_BOARD		0x044b
-+
-+/* BCM63XX boards */
-+#define BCM96338_BOARD		0x6338
-+#define BCM96348_BOARD		0x6348
-+
-+/* Another mp4306 with SiGe */
-+#define	BCM94306P_BOARD		0x044c
-+
-+/* mp4303 */
-+#define	BCM94303MP_BOARD	0x044e
-+
-+/* mpsgh4306 */
-+#define	BCM94306MPSGH_BOARD	0x044f
-+
-+/* BRCM 4306 w/ Front End Modules */
-+#define BCM94306MPM  		0x0450
-+#define BCM94306MPL  		0x0453
-+
-+/* 4712agr */
-+#define	BCM94712AGR_BOARD	0x0451
-+
-+/* pcmcia 4303 */
-+#define	PC4303_BOARD		0x0454
-+
-+/* 5350K */
-+#define	BCM95350K_BOARD		0x0455
-+
-+/* 5350R */
-+#define	BCM95350R_BOARD		0x0456
-+
-+/* 4306mplna */
-+#define	BCM94306MPLNA_BOARD	0x0457
-+
-+/* 4320 boards */
-+#define	BU4320_BOARD		0x0458
-+#define	BU4320S_BOARD		0x0459
-+#define	BCM94320PH_BOARD	0x045a
-+
-+/* 4306mph */
-+#define	BCM94306MPH_BOARD	0x045b
-+
-+/* 4306pciv */
-+#define	BCM94306PCIV_BOARD	0x045c
-+
-+#define	BU4712SD_BOARD		0x045d
-+
-+#define	BCM94320PFLSH_BOARD	0x045e
-+
-+#define	BU4712L_BOARD		0x045f
-+#define	BCM94712LGR_BOARD	0x0460
-+#define	BCM94320R_BOARD		0x0461
-+
-+#define	BU5352_BOARD		0x0462
-+
-+#define	BCM94318MPGH_BOARD	0x0463
-+
-+#define	BU4311_BOARD		0x0464
-+#define	BCM94311MC_BOARD	0x0465
-+#define	BCM94311MCAG_BOARD	0x0466
-+
-+#define	BCM95352GR_BOARD	0x0467
-+
-+/* bcm95351agr */
-+#define	BCM95351AGR_BOARD	0x0470
-+
-+/* bcm94704mpcb */
-+#define	BCM94704MPCB_BOARD	0x0472
-+
-+/* 4785 boards */
-+#define BU4785_BOARD		0x0478
-+
-+/* 4321 boards */
-+#define BU4321_BOARD		0x046b
-+#define BU4321E_BOARD		0x047c
-+#define MP4321_BOARD		0x046c
-+#define CB2_4321_BOARD		0x046d
-+#define MC4321_BOARD		0x046e
-+
-+/* # of GPIO pins */
-+#define GPIO_NUMPINS		16
-+
-+/* radio ID codes */
-+#define	NORADIO_ID		0xe4f5
-+#define	NORADIO_IDCODE		0x4e4f5246
-+
-+#define	BCM2050_ID		0x2050
-+#define	BCM2050_IDCODE		0x02050000
-+#define	BCM2050A0_IDCODE	0x1205017f
-+#define	BCM2050A1_IDCODE	0x2205017f
-+#define	BCM2050R8_IDCODE	0x8205017f
-+
-+#define BCM2055_ID		0x2055
-+#define BCM2055_IDCODE		0x02055000
-+#define BCM2055A0_IDCODE	0x1205517f
-+
-+#define	BCM2060_ID		0x2060
-+#define	BCM2060_IDCODE		0x02060000
-+#define	BCM2060WW_IDCODE	0x1206017f
-+
-+#define BCM2062_ID		0x2062
-+#define BCM2062_IDCODE		0x02062000
-+#define BCM2062A0_IDCODE	0x0206217f
-+
-+/* parts of an idcode: */
-+#define	IDCODE_MFG_MASK		0x00000fff
-+#define	IDCODE_MFG_SHIFT	0
-+#define	IDCODE_ID_MASK		0x0ffff000
-+#define	IDCODE_ID_SHIFT		12
-+#define	IDCODE_REV_MASK		0xf0000000
-+#define	IDCODE_REV_SHIFT	28
-+
-+#endif /* _BCMDEVS_H */
-diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs1.h linux.dev/arch/mips/bcm947xx/include/bcmdevs1.h
---- linux.old/arch/mips/bcm947xx/include/bcmdevs1.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmdevs1.h	2006-05-02 04:32:03.000000000 +0200
-@@ -0,0 +1,391 @@
-+/*
-+ * Broadcom device-specific manifest constants.
-+ *
-+ * Copyright 2005, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id$
-+ */
-+
-+#ifndef	_BCMDEVS_H
-+#define	_BCMDEVS_H
-+
-+
-+/* Known PCI vendor Id's */
-+#define	VENDOR_EPIGRAM		0xfeda
-+#define	VENDOR_BROADCOM		0x14e4
-+#define	VENDOR_3COM		0x10b7
-+#define	VENDOR_NETGEAR		0x1385
-+#define	VENDOR_DIAMOND		0x1092
-+#define	VENDOR_DELL		0x1028
-+#define	VENDOR_HP		0x0e11
-+#define	VENDOR_APPLE		0x106b
-+
-+/* PCI Device Id's */
-+#define	BCM4210_DEVICE_ID	0x1072		/* never used */
-+#define	BCM4211_DEVICE_ID	0x4211
-+#define	BCM4230_DEVICE_ID	0x1086		/* never used */
-+#define	BCM4231_DEVICE_ID	0x4231
-+
-+#define	BCM4410_DEVICE_ID	0x4410		/* bcm44xx family pci iline */
-+#define	BCM4430_DEVICE_ID	0x4430		/* bcm44xx family cardbus iline */
-+#define	BCM4412_DEVICE_ID	0x4412		/* bcm44xx family pci enet */
-+#define	BCM4432_DEVICE_ID	0x4432		/* bcm44xx family cardbus enet */
-+
-+#define	BCM3352_DEVICE_ID	0x3352		/* bcm3352 device id */
-+#define	BCM3360_DEVICE_ID	0x3360		/* bcm3360 device id */
-+
-+#define	EPI41210_DEVICE_ID	0xa0fa		/* bcm4210 */
-+#define	EPI41230_DEVICE_ID	0xa10e		/* bcm4230 */
-+
-+#define	BCM47XX_ILINE_ID	0x4711		/* 47xx iline20 */
-+#define	BCM47XX_V90_ID		0x4712		/* 47xx v90 codec */
-+#define	BCM47XX_ENET_ID		0x4713		/* 47xx enet */
-+#define	BCM47XX_EXT_ID		0x4714		/* 47xx external i/f */
-+#define	BCM47XX_USB_ID		0x4715		/* 47xx usb */
-+#define	BCM47XX_USBH_ID		0x4716		/* 47xx usb host */
-+#define	BCM47XX_USBD_ID		0x4717		/* 47xx usb device */
-+#define	BCM47XX_IPSEC_ID	0x4718		/* 47xx ipsec */
-+#define	BCM47XX_ROBO_ID		0x4719		/* 47xx/53xx roboswitch core */
-+#define	BCM47XX_USB20H_ID	0x471a		/* 47xx usb 2.0 host */
-+#define	BCM47XX_USB20D_ID	0x471b		/* 47xx usb 2.0 device */
-+
-+#define	BCM4710_DEVICE_ID	0x4710		/* 4710 primary function 0 */
-+
-+#define	BCM4610_DEVICE_ID	0x4610		/* 4610 primary function 0 */
-+#define	BCM4610_ILINE_ID	0x4611		/* 4610 iline100 */
-+#define	BCM4610_V90_ID		0x4612		/* 4610 v90 codec */
-+#define	BCM4610_ENET_ID		0x4613		/* 4610 enet */
-+#define	BCM4610_EXT_ID		0x4614		/* 4610 external i/f */
-+#define	BCM4610_USB_ID		0x4615		/* 4610 usb */
-+
-+#define	BCM4402_DEVICE_ID	0x4402		/* 4402 primary function 0 */
-+#define	BCM4402_ENET_ID		0x4402		/* 4402 enet */
-+#define	BCM4402_V90_ID		0x4403		/* 4402 v90 codec */
-+#define	BCM4401_ENET_ID		0x170c		/* 4401b0 production enet cards */
-+
-+#define	BCM4301_DEVICE_ID	0x4301		/* 4301 primary function 0 */
-+#define	BCM4301_D11B_ID		0x4301		/* 4301 802.11b */
-+
-+#define	BCM4307_DEVICE_ID	0x4307		/* 4307 primary function 0 */
-+#define	BCM4307_V90_ID		0x4305		/* 4307 v90 codec */
-+#define	BCM4307_ENET_ID		0x4306		/* 4307 enet */
-+#define	BCM4307_D11B_ID		0x4307		/* 4307 802.11b */
-+
-+#define	BCM4306_DEVICE_ID	0x4306		/* 4306 chipcommon chipid */
-+#define	BCM4306_D11G_ID		0x4320		/* 4306 802.11g */
-+#define	BCM4306_D11G_ID2	0x4325		
-+#define	BCM4306_D11A_ID		0x4321		/* 4306 802.11a */
-+#define	BCM4306_UART_ID		0x4322		/* 4306 uart */
-+#define	BCM4306_V90_ID		0x4323		/* 4306 v90 codec */
-+#define	BCM4306_D11DUAL_ID	0x4324		/* 4306 dual A+B */
-+
-+#define	BCM4309_PKG_ID		1		/* 4309 package id */
-+
-+#define	BCM4303_D11B_ID		0x4303		/* 4303 802.11b */
-+#define	BCM4303_PKG_ID		2		/* 4303 package id */
-+
-+#define	BCM4310_DEVICE_ID	0x4310		/* 4310 chipcommon chipid */
-+#define	BCM4310_D11B_ID		0x4311		/* 4310 802.11b */
-+#define	BCM4310_UART_ID		0x4312		/* 4310 uart */
-+#define	BCM4310_ENET_ID		0x4313		/* 4310 enet */
-+#define	BCM4310_USB_ID		0x4315		/* 4310 usb */
-+
-+#define	BCMGPRS_UART_ID		0x4333		/* Uart id used by 4306/gprs card */
-+#define	BCMGPRS2_UART_ID	0x4344		/* Uart id used by 4306/gprs card */
-+
-+
-+#define	BCM4704_DEVICE_ID	0x4704		/* 4704 chipcommon chipid */
-+#define	BCM4704_ENET_ID		0x4706		/* 4704 enet (Use 47XX_ENET_ID instead!) */
-+
-+#define	BCM4317_DEVICE_ID	0x4317		/* 4317 chip common chipid */
-+
-+#define	BCM4318_DEVICE_ID	0x4318		/* 4318 chip common chipid */
-+#define	BCM4318_D11G_ID		0x4318		/* 4318 801.11b/g id */
-+#define	BCM4318_D11DUAL_ID	0x4319		/* 4318 801.11a/b/g id */
-+#define BCM4318_JTAGM_ID	0x4331		/* 4318 jtagm device id */
-+
-+#define FPGA_JTAGM_ID		0x4330		/* ??? */
-+
-+/* Address map */
-+#define BCM4710_SDRAM           0x00000000      /* Physical SDRAM */
-+#define BCM4710_PCI_MEM         0x08000000      /* Host Mode PCI memory access space (64 MB) */
-+#define BCM4710_PCI_CFG         0x0c000000      /* Host Mode PCI configuration space (64 MB) */
-+#define BCM4710_PCI_DMA         0x40000000      /* Client Mode PCI memory access space (1 GB) */
-+#define BCM4710_SDRAM_SWAPPED   0x10000000      /* Byteswapped Physical SDRAM */
-+#define BCM4710_ENUM            0x18000000      /* Beginning of core enumeration space */
-+
-+/* Core register space */
-+#define BCM4710_REG_SDRAM       0x18000000      /* SDRAM core registers */
-+#define BCM4710_REG_ILINE20     0x18001000      /* InsideLine20 core registers */
-+#define BCM4710_REG_EMAC0       0x18002000      /* Ethernet MAC 0 core registers */
-+#define BCM4710_REG_CODEC       0x18003000      /* Codec core registers */
-+#define BCM4710_REG_USB         0x18004000      /* USB core registers */
-+#define BCM4710_REG_PCI         0x18005000      /* PCI core registers */
-+#define BCM4710_REG_MIPS        0x18006000      /* MIPS core registers */
-+#define BCM4710_REG_EXTIF       0x18007000      /* External Interface core registers */
-+#define BCM4710_REG_EMAC1       0x18008000      /* Ethernet MAC 1 core registers */
-+
-+#define BCM4710_EXTIF           0x1f000000      /* External Interface base address */
-+#define BCM4710_PCMCIA_MEM      0x1f000000      /* External Interface PCMCIA memory access */
-+#define BCM4710_PCMCIA_IO       0x1f100000      /* PCMCIA I/O access */
-+#define BCM4710_PCMCIA_CONF     0x1f200000      /* PCMCIA configuration */
-+#define BCM4710_PROG            0x1f800000      /* Programable interface */
-+#define BCM4710_FLASH           0x1fc00000      /* Flash */
-+
-+#define BCM4710_EJTAG           0xff200000      /* MIPS EJTAG space (2M) */
-+
-+#define BCM4710_UART            (BCM4710_REG_EXTIF + 0x00000300)
-+
-+#define BCM4710_EUART           (BCM4710_EXTIF + 0x00800000)
-+#define BCM4710_LED             (BCM4710_EXTIF + 0x00900000)
-+
-+#define	BCM4712_DEVICE_ID	0x4712		/* 4712 chipcommon chipid */
-+#define	BCM4712_MIPS_ID		0x4720		/* 4712 base devid */
-+#define	BCM4712LARGE_PKG_ID	0		/* 340pin 4712 package id */
-+#define	BCM4712SMALL_PKG_ID	1		/* 200pin 4712 package id */
-+#define	BCM4712MID_PKG_ID	2		/* 225pin 4712 package id */
-+
-+#define	SDIOH_FPGA_ID		0x4380		/* sdio host fpga */
-+
-+#define BCM5365_DEVICE_ID       0x5365          /* 5365 chipcommon chipid */
-+#define	BCM5350_DEVICE_ID	0x5350		/* bcm5350 chipcommon chipid */
-+#define	BCM5352_DEVICE_ID	0x5352		/* bcm5352 chipcommon chipid */
-+
-+#define	BCM4320_DEVICE_ID	0x4320		/* bcm4320 chipcommon chipid */
-+
-+/* PCMCIA vendor Id's */
-+
-+#define	VENDOR_BROADCOM_PCMCIA	0x02d0
-+
-+/* SDIO vendor Id's */
-+#define	VENDOR_BROADCOM_SDIO	0x00BF
-+
-+
-+/* boardflags */
-+#define	BFL_BTCOEXIST		0x0001	/* This board implements Bluetooth coexistance */
-+#define	BFL_PACTRL		0x0002	/* This board has gpio 9 controlling the PA */
-+#define	BFL_AIRLINEMODE		0x0004	/* This board implements gpio13 radio disable indication */
-+#define	BFL_ENETROBO		0x0010	/* This board has robo switch or core */
-+#define	BFL_CCKHIPWR		0x0040	/* Can do high-power CCK transmission */
-+#define	BFL_ENETADM		0x0080	/* This board has ADMtek switch */
-+#define	BFL_ENETVLAN		0x0100	/* This board has vlan capability */
-+#define	BFL_AFTERBURNER		0x0200	/* This board supports Afterburner mode */
-+#define BFL_NOPCI		0x0400	/* This board leaves PCI floating */
-+#define BFL_FEM			0x0800  /* This board supports the Front End Module */
-+#define BFL_EXTLNA		0x1000	/* This board has an external LNA */
-+#define BFL_HGPA		0x2000	/* This board has a high gain PA */
-+#define	BFL_BTCMOD		0x4000	/* This board' BTCOEXIST is in the alternate gpios */
-+#define	BFL_ALTIQ		0x8000	/* Alternate I/Q settings */
-+
-+/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
-+#define BOARD_GPIO_HWRAD_B	0x010	/* bit 4 is HWRAD input on 4301 */
-+#define	BOARD_GPIO_BTCMOD_IN	0x010	/* bit 4 is the alternate BT Coexistance Input */
-+#define	BOARD_GPIO_BTCMOD_OUT	0x020	/* bit 5 is the alternate BT Coexistance Out */
-+#define	BOARD_GPIO_BTC_IN	0x080	/* bit 7 is BT Coexistance Input */
-+#define	BOARD_GPIO_BTC_OUT	0x100	/* bit 8 is BT Coexistance Out */
-+#define	BOARD_GPIO_PACTRL	0x200	/* bit 9 controls the PA on new 4306 boards */
-+#define	PCI_CFG_GPIO_SCS	0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
-+#define PCI_CFG_GPIO_HWRAD	0x20	/* PCI config space GPIO 13 for hw radio disable */
-+#define PCI_CFG_GPIO_XTAL	0x40	/* PCI config space GPIO 14 for Xtal powerup */
-+#define PCI_CFG_GPIO_PLL	0x80	/* PCI config space GPIO 15 for PLL powerdown */
-+
-+/* Bus types */
-+#define	SB_BUS			0	/* Silicon Backplane */
-+#define	PCI_BUS			1	/* PCI target */
-+#define	PCMCIA_BUS		2	/* PCMCIA target */
-+#define SDIO_BUS		3	/* SDIO target */
-+#define JTAG_BUS		4	/* JTAG */
-+
-+/* Allows optimization for single-bus support */
-+#ifdef BCMBUSTYPE
-+#define BUSTYPE(bus) (BCMBUSTYPE)
-+#else
-+#define BUSTYPE(bus) (bus)
-+#endif
-+
-+/* power control defines */
-+#define PLL_DELAY		150		/* us pll on delay */
-+#define FREF_DELAY		200		/* us fref change delay */
-+#define MIN_SLOW_CLK		32		/* us Slow clock period */
-+#define	XTAL_ON_DELAY		1000		/* us crystal power-on delay */
-+
-+/* Reference Board Types */
-+
-+#define	BU4710_BOARD		0x0400
-+#define	VSIM4710_BOARD		0x0401
-+#define	QT4710_BOARD		0x0402
-+
-+#define	BU4610_BOARD		0x0403
-+#define	VSIM4610_BOARD		0x0404
-+
-+#define	BU4307_BOARD		0x0405
-+#define	BCM94301CB_BOARD	0x0406
-+#define	BCM94301PC_BOARD	0x0406		/* Pcmcia 5v card */
-+#define	BCM94301MP_BOARD	0x0407
-+#define	BCM94307MP_BOARD	0x0408
-+#define	BCMAP4307_BOARD		0x0409
-+
-+#define	BU4309_BOARD		0x040a
-+#define	BCM94309CB_BOARD	0x040b
-+#define	BCM94309MP_BOARD	0x040c
-+#define	BCM4309AP_BOARD		0x040d
-+
-+#define	BCM94302MP_BOARD	0x040e
-+
-+#define	VSIM4310_BOARD		0x040f
-+#define	BU4711_BOARD		0x0410
-+#define	BCM94310U_BOARD		0x0411
-+#define	BCM94310AP_BOARD	0x0412
-+#define	BCM94310MP_BOARD	0x0414
-+
-+#define	BU4306_BOARD		0x0416
-+#define	BCM94306CB_BOARD	0x0417
-+#define	BCM94306MP_BOARD	0x0418
-+
-+#define	BCM94710D_BOARD		0x041a
-+#define	BCM94710R1_BOARD	0x041b
-+#define	BCM94710R4_BOARD	0x041c
-+#define	BCM94710AP_BOARD	0x041d
-+
-+
-+#define	BU2050_BOARD		0x041f
-+
-+
-+#define	BCM94309G_BOARD		0x0421
-+
-+#define	BCM94301PC3_BOARD	0x0422		/* Pcmcia 3.3v card */
-+
-+#define	BU4704_BOARD		0x0423
-+#define	BU4702_BOARD		0x0424
-+
-+#define	BCM94306PC_BOARD	0x0425		/* pcmcia 3.3v 4306 card */
-+
-+#define	BU4317_BOARD		0x0426
-+
-+
-+#define	BCM94702MN_BOARD	0x0428
-+
-+/* BCM4702 1U CompactPCI Board */
-+#define	BCM94702CPCI_BOARD	0x0429
-+
-+/* BCM4702 with BCM95380 VLAN Router */
-+#define	BCM95380RR_BOARD	0x042a
-+
-+/* cb4306 with SiGe PA */
-+#define	BCM94306CBSG_BOARD	0x042b
-+
-+/* mp4301 with 2050 radio */
-+#define	BCM94301MPL_BOARD	0x042c
-+
-+/* cb4306 with SiGe PA */
-+#define	PCSG94306_BOARD		0x042d
-+
-+/* bu4704 with sdram */
-+#define	BU4704SD_BOARD		0x042e
-+
-+/* Dual 11a/11g Router */
-+#define	BCM94704AGR_BOARD	0x042f
-+
-+/* 11a-only minipci */
-+#define	BCM94308MP_BOARD	0x0430
-+
-+
-+
-+/* BCM94317 boards */
-+#define BCM94317CB_BOARD	0x0440
-+#define BCM94317MP_BOARD	0x0441
-+#define BCM94317PCMCIA_BOARD	0x0442
-+#define BCM94317SDIO_BOARD	0x0443
-+
-+#define BU4712_BOARD		0x0444
-+#define	BU4712SD_BOARD		0x045d
-+#define	BU4712L_BOARD		0x045f
-+
-+/* BCM4712 boards */
-+#define BCM94712AP_BOARD	0x0445
-+#define BCM94712P_BOARD		0x0446
-+
-+/* BCM4318 boards */
-+#define BU4318_BOARD		0x0447
-+#define CB4318_BOARD		0x0448
-+#define MPG4318_BOARD		0x0449
-+#define MP4318_BOARD		0x044a
-+#define SD4318_BOARD		0x044b
-+
-+/* BCM63XX boards */
-+#define BCM96338_BOARD		0x6338
-+#define BCM96345_BOARD		0x6345
-+#define BCM96348_BOARD		0x6348
-+
-+/* Another mp4306 with SiGe */
-+#define	BCM94306P_BOARD		0x044c
-+
-+/* CF-like 4317 modules */
-+#define	BCM94317CF_BOARD	0x044d
-+
-+/* mp4303 */
-+#define	BCM94303MP_BOARD	0x044e
-+
-+/* mpsgh4306 */
-+#define	BCM94306MPSGH_BOARD	0x044f
-+
-+/* BRCM 4306 w/ Front End Modules */
-+#define BCM94306MPM  		0x0450
-+#define BCM94306MPL  		0x0453
-+
-+/* 4712agr */
-+#define	BCM94712AGR_BOARD	0x0451
-+
-+/* The real CF 4317 board */
-+#define	CFI4317_BOARD		0x0452
-+
-+/* pcmcia 4303 */
-+#define	PC4303_BOARD		0x0454
-+
-+/* 5350K */
-+#define	BCM95350K_BOARD		0x0455
-+
-+/* 5350R */
-+#define	BCM95350R_BOARD		0x0456
-+
-+/* 4306mplna */
-+#define	BCM94306MPLNA_BOARD	0x0457
-+
-+/* 4320 boards */
-+#define	BU4320_BOARD		0x0458
-+#define	BU4320S_BOARD		0x0459
-+#define	BCM94320PH_BOARD	0x045a
-+
-+/* 4306mph */
-+#define	BCM94306MPH_BOARD	0x045b
-+
-+/* 4306pciv */
-+#define	BCM94306PCIV_BOARD	0x045c
-+
-+#define	BU4712SD_BOARD		0x045d
-+
-+#define	BCM94320PFLSH_BOARD	0x045e
-+
-+#define	BU4712L_BOARD		0x045f
-+#define	BCM94712LGR_BOARD	0x0460
-+#define	BCM94320R_BOARD		0x0461
-+
-+#define	BU5352_BOARD		0x0462
-+
-+#define	BCM94318MPGH_BOARD	0x0463
-+
-+
-+#define	BCM95352GR_BOARD	0x0467
-+
-+/* bcm95351agr */
-+#define	BCM95351AGR_BOARD	0x0470
-+
-+/* # of GPIO pins */
-+#define GPIO_NUMPINS		16
-+
-+#endif /* _BCMDEVS_H */
-diff -urN linux.old/arch/mips/bcm947xx/include/bcmendian.h linux.dev/arch/mips/bcm947xx/include/bcmendian.h
---- linux.old/arch/mips/bcm947xx/include/bcmendian.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmendian.h	2006-04-27 20:08:35.000000000 +0200
-@@ -0,0 +1,198 @@
-+/*
-+ * local version of endian.h - byte order defines
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ *  $Id: bcmendian.h,v 1.1.1.10 2006/02/27 03:43:16 honor Exp $
-+*/
-+
-+#ifndef _BCMENDIAN_H_
-+#define _BCMENDIAN_H_
-+
-+#include <typedefs.h>
-+
-+/* Byte swap a 16 bit value */
-+#define BCMSWAP16(val) \
-+	((uint16)(\
-+		(((uint16)(val) & (uint16)0x00ffU) << 8) | \
-+		(((uint16)(val) & (uint16)0xff00U) >> 8)))
-+
-+/* Byte swap a 32 bit value */
-+#define BCMSWAP32(val) \
-+	((uint32)(\
-+		(((uint32)(val) & (uint32)0x000000ffUL) << 24) | \
-+		(((uint32)(val) & (uint32)0x0000ff00UL) <<  8) | \
-+		(((uint32)(val) & (uint32)0x00ff0000UL) >>  8) | \
-+		(((uint32)(val) & (uint32)0xff000000UL) >> 24)))
-+
-+/* 2 Byte swap a 32 bit value */
-+#define BCMSWAP32BY16(val) \
-+	((uint32)(\
-+		(((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \
-+		(((uint32)(val) & (uint32)0xffff0000UL) >> 16)))
-+
-+
-+static INLINE uint16
-+bcmswap16(uint16 val)
-+{
-+	return BCMSWAP16(val);
-+}
-+
-+static INLINE uint32
-+bcmswap32(uint32 val)
-+{
-+	return BCMSWAP32(val);
-+}
-+
-+static INLINE uint32
-+bcmswap32by16(uint32 val)
-+{
-+	return BCMSWAP32BY16(val);
-+}
-+
-+/* buf	- start of buffer of shorts to swap */
-+/* len  - byte length of buffer */
-+static INLINE void
-+bcmswap16_buf(uint16 *buf, uint len)
-+{
-+	len = len/2;
-+
-+	while (len--) {
-+		*buf = bcmswap16(*buf);
-+		buf++;
-+	}
-+}
-+
-+#ifndef hton16
-+#ifndef IL_BIGENDIAN
-+#define HTON16(i) BCMSWAP16(i)
-+#define	hton16(i) bcmswap16(i)
-+#define	hton32(i) bcmswap32(i)
-+#define	ntoh16(i) bcmswap16(i)
-+#define	ntoh32(i) bcmswap32(i)
-+#define ltoh16(i) (i)
-+#define ltoh32(i) (i)
-+#define htol16(i) (i)
-+#define htol32(i) (i)
-+#else
-+#define HTON16(i) (i)
-+#define	hton16(i) (i)
-+#define	hton32(i) (i)
-+#define	ntoh16(i) (i)
-+#define	ntoh32(i) (i)
-+#define	ltoh16(i) bcmswap16(i)
-+#define	ltoh32(i) bcmswap32(i)
-+#define htol16(i) bcmswap16(i)
-+#define htol32(i) bcmswap32(i)
-+#endif /* IL_BIGENDIAN */
-+#endif /* hton16 */
-+
-+#ifndef IL_BIGENDIAN
-+#define ltoh16_buf(buf, i)
-+#define htol16_buf(buf, i)
-+#else
-+#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
-+#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
-+#endif /* IL_BIGENDIAN */
-+
-+/*
-+* store 16-bit value to unaligned little endian byte array.
-+*/
-+static INLINE void
-+htol16_ua_store(uint16 val, uint8 *bytes)
-+{
-+	bytes[0] = val&0xff;
-+	bytes[1] = val>>8;
-+}
-+
-+/*
-+* store 32-bit value to unaligned little endian byte array.
-+*/
-+static INLINE void
-+htol32_ua_store(uint32 val, uint8 *bytes)
-+{
-+	bytes[0] = val&0xff;
-+	bytes[1] = (val>>8)&0xff;
-+	bytes[2] = (val>>16)&0xff;
-+	bytes[3] = val>>24;
-+}
-+
-+/*
-+* store 16-bit value to unaligned network(big) endian byte array.
-+*/
-+static INLINE void
-+hton16_ua_store(uint16 val, uint8 *bytes)
-+{
-+	bytes[1] = val&0xff;
-+	bytes[0] = val>>8;
-+}
-+
-+/*
-+* store 32-bit value to unaligned network(big) endian byte array.
-+*/
-+static INLINE void
-+hton32_ua_store(uint32 val, uint8 *bytes)
-+{
-+	bytes[3] = val&0xff;
-+	bytes[2] = (val>>8)&0xff;
-+	bytes[1] = (val>>16)&0xff;
-+	bytes[0] = val>>24;
-+}
-+
-+/*
-+* load 16-bit value from unaligned little endian byte array.
-+*/
-+static INLINE uint16
-+ltoh16_ua(void *bytes)
-+{
-+	return (((uint8*)bytes)[1]<<8)+((uint8 *)bytes)[0];
-+}
-+
-+/*
-+* load 32-bit value from unaligned little endian byte array.
-+*/
-+static INLINE uint32
-+ltoh32_ua(void *bytes)
-+{
-+	return (((uint8*)bytes)[3]<<24)+(((uint8*)bytes)[2]<<16)+
-+	       (((uint8*)bytes)[1]<<8)+((uint8*)bytes)[0];
-+}
-+
-+/*
-+* load 16-bit value from unaligned big(network) endian byte array.
-+*/
-+static INLINE uint16
-+ntoh16_ua(void *bytes)
-+{
-+	return (((uint8*)bytes)[0]<<8)+((uint8*)bytes)[1];
-+}
-+
-+/*
-+* load 32-bit value from unaligned big(network) endian byte array.
-+*/
-+static INLINE uint32
-+ntoh32_ua(void *bytes)
-+{
-+	return (((uint8*)bytes)[0]<<24)+(((uint8*)bytes)[1]<<16)+
-+	       (((uint8*)bytes)[2]<<8)+((uint8*)bytes)[3];
-+}
-+
-+#define ltoh_ua(ptr) (\
-+	sizeof(*(ptr)) == sizeof(uint8) ?  *(uint8 *)ptr : \
-+	sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \
-+	(((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \
-+)
-+
-+#define ntoh_ua(ptr) (\
-+	sizeof(*(ptr)) == sizeof(uint8) ?  *(uint8 *)ptr : \
-+	sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \
-+	(((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \
-+)
-+
-+#endif /* _BCMENDIAN_H_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/bcmnvram.h linux.dev/arch/mips/bcm947xx/include/bcmnvram.h
---- linux.old/arch/mips/bcm947xx/include/bcmnvram.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmnvram.h	2006-04-27 23:29:18.000000000 +0200
-@@ -0,0 +1,159 @@
-+/*
-+ * NVRAM variable manipulation
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: bcmnvram.h,v 1.17 2006/03/02 12:33:44 honor Exp $
-+ */
-+
-+#ifndef _bcmnvram_h_
-+#define _bcmnvram_h_
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+#include <typedefs.h>
-+#include <bcmdefs.h>
-+
-+struct nvram_header {
-+	uint32 magic;
-+	uint32 len;
-+	uint32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
-+	uint32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
-+	uint32 config_ncdl;	/* ncdl values for memc */
-+};
-+
-+struct nvram_tuple {
-+	char *name;
-+	char *value;
-+	struct nvram_tuple *next;
-+};
-+
-+/*
-+ * Initialize NVRAM access. May be unnecessary or undefined on certain
-+ * platforms.
-+ */
-+extern int nvram_init(void *sbh);
-+
-+/*
-+ * Disable NVRAM access. May be unnecessary or undefined on certain
-+ * platforms.
-+ */
-+extern void nvram_exit(void *sbh);
-+
-+/*
-+ * Get the value of an NVRAM variable. The pointer returned may be
-+ * invalid after a set.
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NULL if undefined
-+ */
-+extern char * nvram_get(const char *name);
-+
-+/* 
-+ * Read the reset GPIO value from the nvram and set the GPIO
-+ * as input
-+ */
-+extern int BCMINITFN(nvram_resetgpio_init)(void *sbh);
-+extern int BCMINITFN(nvram_gpio_init)(const char *name, void *sbh);
-+extern int BCMINITFN(nvram_gpio_set)(const char *name, void *sbh, int type);
-+
-+/* 
-+ * Get the value of an NVRAM variable.
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NUL if undefined
-+ */
-+#define nvram_safe_get(name) (nvram_get(name) ? : "")
-+
-+#define nvram_safe_unset(name) ({ \
-+	if(nvram_get(name)) \
-+		nvram_unset(name); \
-+})
-+
-+#define nvram_safe_set(name, value) ({ \
-+	if(!nvram_get(name) || strcmp(nvram_get(name), value)) \
-+		nvram_set(name, value); \
-+})
-+
-+/*
-+ * Match an NVRAM variable.
-+ * @param	name	name of variable to match
-+ * @param	match	value to compare against value of variable
-+ * @return	TRUE if variable is defined and its value is string equal
-+ *		to match or FALSE otherwise
-+ */
-+static INLINE int
-+nvram_match(char *name, char *match) {
-+	const char *value = nvram_get(name);
-+	return (value && !strcmp(value, match));
-+}
-+
-+/*
-+ * Inversely match an NVRAM variable.
-+ * @param	name	name of variable to match
-+ * @param	match	value to compare against value of variable
-+ * @return	TRUE if variable is defined and its value is not string
-+ *		equal to invmatch or FALSE otherwise
-+ */
-+static INLINE int
-+nvram_invmatch(char *name, char *invmatch) {
-+	const char *value = nvram_get(name);
-+	return (value && strcmp(value, invmatch));
-+}
-+
-+/*
-+ * Set the value of an NVRAM variable. The name and value strings are
-+ * copied into private storage. Pointers to previously set values
-+ * may become invalid. The new value may be immediately
-+ * retrieved but will not be permanently stored until a commit.
-+ * @param	name	name of variable to set
-+ * @param	value	value of variable
-+ * @return	0 on success and errno on failure
-+ */
-+extern int nvram_set(const char *name, const char *value);
-+
-+/*
-+ * Unset an NVRAM variable. Pointers to previously set values
-+ * remain valid until a set.
-+ * @param	name	name of variable to unset
-+ * @return	0 on success and errno on failure
-+ * NOTE: use nvram_commit to commit this change to flash.
-+ */
-+extern int nvram_unset(const char *name);
-+
-+/*
-+ * Commit NVRAM variables to permanent storage. All pointers to values
-+ * may be invalid after a commit.
-+ * NVRAM values are undefined after a commit.
-+ * @return	0 on success and errno on failure
-+ */
-+extern int nvram_commit(void);
-+
-+/*
-+ * Get all NVRAM variables (format name=value\0 ... \0\0).
-+ * @param	buf	buffer to store variables
-+ * @param	count	size of buffer in bytes
-+ * @return	0 on success and errno on failure
-+ */
-+extern int nvram_getall(char *buf, int count);
-+
-+extern int file2nvram(char *filename, char *varname);
-+extern int nvram2file(char *varname, char *filename);
-+
-+#endif /* _LANGUAGE_ASSEMBLY */
-+
-+#define NVRAM_MAGIC		0x48534C46	/* 'FLSH' */
-+#define NVRAM_CLEAR_MAGIC		0x0
-+#define NVRAM_INVALID_MAGIC	0xFFFFFFFF
-+#define NVRAM_VERSION		1
-+#define NVRAM_HEADER_SIZE	20
-+#define NVRAM_SPACE		0x8000
-+
-+#define NVRAM_MAX_VALUE_LEN 255
-+#define NVRAM_MAX_PARAM_LEN 64
-+
-+#endif /* _bcmnvram_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/bcmsrom.h linux.dev/arch/mips/bcm947xx/include/bcmsrom.h
---- linux.old/arch/mips/bcm947xx/include/bcmsrom.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmsrom.h	2006-04-27 20:27:33.000000000 +0200
-@@ -0,0 +1,108 @@
-+/*
-+ * Misc useful routines to access NIC local SROM/OTP .
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: bcmsrom.h,v 1.1.1.13 2006/04/15 01:29:08 michael Exp $
-+ */
-+
-+#ifndef	_bcmsrom_h_
-+#define	_bcmsrom_h_
-+
-+/* Maximum srom: 4 Kilobits == 512 bytes */
-+#define	SROM_MAX	512
-+
-+/* SROM Rev 4: Reallocate the software part of the srom to accomodate
-+ * MIMO features. It assumes up to two PCIE functions and 440 bytes
-+ * of useable srom i.e. the useable storage in chips with OTP that
-+ * implements hardware redundancy.
-+ */
-+
-+#define	SROM4_WORDS		220
-+
-+#define	SROM4_SIGN		32
-+#define	SROM4_SIGNATURE		0x5372
-+
-+#define	SROM4_BREV		33
-+
-+#define	SROM4_BFL0		34
-+#define	SROM4_BFL1		35
-+#define	SROM4_BFL2		36
-+#define	SROM4_BFL3		37
-+
-+#define	SROM4_MACHI		38
-+#define	SROM4_MACMID		39
-+#define	SROM4_MACLO		40
-+
-+#define	SROM4_CCODE		41
-+#define	SROM4_REGREV		42
-+
-+#define	SROM4_LEDBH10		43
-+#define	SROM4_LEDBH32		44
-+
-+#define	SROM4_LEDDC		45
-+
-+#define	SROM4_AA		46
-+#define	SROM4_AA2G_MASK		0x00ff
-+#define	SROM4_AA2G_SHIFT	0
-+#define	SROM4_AA5G_MASK		0xff00
-+#define	SROM4_AA5G_SHIFT	8
-+
-+#define	SROM4_AG10		47
-+#define	SROM4_AG32		48
-+
-+#define	SROM4_TXPID2G		49
-+#define	SROM4_TXPID5G		51
-+#define	SROM4_TXPID5GL		53
-+#define	SROM4_TXPID5GH		55
-+
-+/* Per-path fields */
-+#define	MAX_PATH		4
-+#define	SROM4_PATH0		64
-+#define	SROM4_PATH1		87
-+#define	SROM4_PATH2		110
-+#define	SROM4_PATH3		133
-+
-+#define	SROM4_2G_ITT_MAXP	0
-+#define	SROM4_2G_PA		1
-+#define	SROM4_5G_ITT_MAXP	5
-+#define	SROM4_5GLH_MAXP		6
-+#define	SROM4_5G_PA		7
-+#define	SROM4_5GL_PA		11
-+#define	SROM4_5GH_PA		15
-+
-+/* Fields in the ITT_MAXP and 5GLH_MAXP words */
-+#define	B2G_MAXP_MASK		0xff
-+#define	B2G_ITT_SHIFT		8
-+#define	B5G_MAXP_MASK		0xff
-+#define	B5G_ITT_SHIFT		8
-+#define	B5GH_MAXP_MASK		0xff
-+#define	B5GL_MAXP_SHIFT		8
-+
-+/* All the miriad power offsets */
-+#define	SROM4_2G_CCKPO		156
-+#define	SROM4_2G_OFDMPO		157
-+#define	SROM4_5G_OFDMPO		159
-+#define	SROM4_5GL_OFDMPO	161
-+#define	SROM4_5GH_OFDMPO	163
-+#define	SROM4_2G_MCSPO		165
-+#define	SROM4_5G_MCSPO		173
-+#define	SROM4_5GL_MCSPO		181
-+#define	SROM4_5GH_MCSPO		189
-+#define	SROM4_CCDPO		197
-+#define	SROM4_STBCPO		198
-+#define	SROM4_BW40PO		199
-+#define	SROM4_BWDUPPO		200
-+
-+extern int srom_var_init(void *sbh, uint bus, void *curmap, osl_t *osh, char **vars, uint *count);
-+
-+extern int srom_read(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf);
-+extern int srom_write(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf);
-+
-+#endif	/* _bcmsrom_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/bcmutils.h linux.dev/arch/mips/bcm947xx/include/bcmutils.h
---- linux.old/arch/mips/bcm947xx/include/bcmutils.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmutils.h	2006-05-02 01:52:12.000000000 +0200
-@@ -0,0 +1,433 @@
-+/*
-+ * Misc useful os-independent macros and functions.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: bcmutils.h,v 1.1.1.16 2006/04/08 06:13:39 honor Exp $
-+ */
-+
-+#ifndef	_bcmutils_h_
-+#define	_bcmutils_h_
-+
-+/* ** driver-only section ** */
-+#ifdef BCMDRIVER
-+
-+#define _BCM_U	0x01	/* upper */
-+#define _BCM_L	0x02	/* lower */
-+#define _BCM_D	0x04	/* digit */
-+#define _BCM_C	0x08	/* cntrl */
-+#define _BCM_P	0x10	/* punct */
-+#define _BCM_S	0x20	/* white space (space/lf/tab) */
-+#define _BCM_X	0x40	/* hex digit */
-+#define _BCM_SP	0x80	/* hard space (0x20) */
-+
-+#define GPIO_PIN_NOTDEFINED 	0x20	/* Pin not defined */
-+
-+extern unsigned char bcm_ctype[];
-+#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
-+
-+#define bcm_isalnum(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
-+#define bcm_isalpha(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
-+#define bcm_iscntrl(c)	((bcm_ismask(c)&(_BCM_C)) != 0)
-+#define bcm_isdigit(c)	((bcm_ismask(c)&(_BCM_D)) != 0)
-+#define bcm_isgraph(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
-+#define bcm_islower(c)	((bcm_ismask(c)&(_BCM_L)) != 0)
-+#define bcm_isprint(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
-+#define bcm_ispunct(c)	((bcm_ismask(c)&(_BCM_P)) != 0)
-+#define bcm_isspace(c)	((bcm_ismask(c)&(_BCM_S)) != 0)
-+#define bcm_isupper(c)	((bcm_ismask(c)&(_BCM_U)) != 0)
-+#define bcm_isxdigit(c)	((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
-+
-+/*
-+ * Spin at most 'us' microseconds while 'exp' is true.
-+ * Caller should explicitly test 'exp' when this completes
-+ * and take appropriate error action if 'exp' is still true.
-+ */
-+#define SPINWAIT(exp, us) { \
-+	uint countdown = (us) + 9; \
-+	while ((exp) && (countdown >= 10)) {\
-+		OSL_DELAY(10); \
-+		countdown -= 10; \
-+	} \
-+}
-+
-+struct  ether_addr {
-+	uint8 octet[6];
-+} __attribute__((packed));
-+
-+/* string */
-+extern uchar bcm_toupper(uchar c);
-+extern ulong bcm_strtoul(char *cp, char **endp, uint base);
-+extern char *bcmstrstr(char *haystack, char *needle);
-+extern char *bcmstrcat(char *dest, const char *src);
-+extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen);
-+/* ethernet address */
-+extern char *bcm_ether_ntoa(struct ether_addr *ea, char *buf);
-+/* variable access */
-+extern char *getvar(char *vars, char *name);
-+extern int getintvar(char *vars, char *name);
-+extern uint getgpiopin(char *vars, char *pin_name, uint def_pin);
-+#ifdef BCMPERFSTATS
-+extern void bcm_perf_enable(void);
-+extern void bcmstats(char *fmt);
-+extern void bcmlog(char *fmt, uint a1, uint a2);
-+extern void bcmdumplog(char *buf, int size);
-+extern int bcmdumplogent(char *buf, uint idx);
-+#else
-+#define bcm_perf_enable()
-+#define bcmstats(fmt)
-+#define	bcmlog(fmt, a1, a2)
-+#define	bcmdumplog(buf, size)	*buf = '\0'
-+#define	bcmdumplogent(buf, idx)	-1
-+#endif /* BCMPERFSTATS */
-+extern char *bcm_nvram_vars(uint *length);
-+extern int bcm_nvram_cache(void *sbh);
-+
-+/* Support for sharing code across in-driver iovar implementations.
-+ * The intent is that a driver use this structure to map iovar names
-+ * to its (private) iovar identifiers, and the lookup function to
-+ * find the entry.  Macros are provided to map ids and get/set actions
-+ * into a single number space for a switch statement.
-+ */
-+
-+/* iovar structure */
-+typedef struct bcm_iovar {
-+	const char *name;	/* name for lookup and display */
-+	uint16 varid;		/* id for switch */
-+	uint16 flags;		/* driver-specific flag bits */
-+	uint16 type;		/* base type of argument */
-+	uint16 minlen;		/* min length for buffer vars */
-+} bcm_iovar_t;
-+
-+/* varid definitions are per-driver, may use these get/set bits */
-+
-+/* IOVar action bits for id mapping */
-+#define IOV_GET 0 /* Get an iovar */
-+#define IOV_SET 1 /* Set an iovar */
-+
-+/* Varid to actionid mapping */
-+#define IOV_GVAL(id)		((id)*2)
-+#define IOV_SVAL(id)		(((id)*2)+IOV_SET)
-+#define IOV_ISSET(actionid)	((actionid & IOV_SET) == IOV_SET)
-+
-+/* flags are per-driver based on driver attributes */
-+
-+/* Base type definitions */
-+#define IOVT_VOID	0	/* no value (implictly set only) */
-+#define IOVT_BOOL	1	/* any value ok (zero/nonzero) */
-+#define IOVT_INT8	2	/* integer values are range-checked */
-+#define IOVT_UINT8	3	/* unsigned int 8 bits */
-+#define IOVT_INT16	4	/* int 16 bits */
-+#define IOVT_UINT16	5	/* unsigned int 16 bits */
-+#define IOVT_INT32	6	/* int 32 bits */
-+#define IOVT_UINT32	7	/* unsigned int 32 bits */
-+#define IOVT_BUFFER	8	/* buffer is size-checked as per minlen */
-+
-+extern const bcm_iovar_t *bcm_iovar_lookup(const bcm_iovar_t *table, const char *name);
-+extern int bcm_iovar_lencheck(const bcm_iovar_t *table, void *arg, int len, bool set);
-+
-+#endif	/* #ifdef BCMDRIVER */
-+
-+/* ** driver/apps-shared section ** */
-+
-+#define BCME_STRLEN 		64	/* Max string length for BCM errors */
-+#define VALID_BCMERROR(e)  ((e <= 0) && (e >= BCME_LAST))
-+
-+
-+/*
-+ * error codes could be added but the defined ones shouldn't be changed/deleted
-+ * these error codes are exposed to the user code
-+ * when ever a new error code is added to this list
-+ * please update errorstring table with the related error string and
-+ * update osl files with os specific errorcode map
-+*/
-+
-+#define BCME_OK				0	/* Success */
-+#define BCME_ERROR			-1	/* Error generic */
-+#define BCME_BADARG			-2	/* Bad Argument */
-+#define BCME_BADOPTION			-3	/* Bad option */
-+#define BCME_NOTUP			-4	/* Not up */
-+#define BCME_NOTDOWN			-5	/* Not down */
-+#define BCME_NOTAP			-6	/* Not AP */
-+#define BCME_NOTSTA			-7	/* Not STA  */
-+#define BCME_BADKEYIDX			-8	/* BAD Key Index */
-+#define BCME_RADIOOFF 			-9	/* Radio Off */
-+#define BCME_NOTBANDLOCKED		-10	/* Not  band locked */
-+#define BCME_NOCLK			-11	/* No Clock */
-+#define BCME_BADRATESET			-12	/* BAD Rate valueset */
-+#define BCME_BADBAND			-13	/* BAD Band */
-+#define BCME_BUFTOOSHORT		-14	/* Buffer too short */
-+#define BCME_BUFTOOLONG			-15	/* Buffer too long */
-+#define BCME_BUSY			-16	/* Busy */
-+#define BCME_NOTASSOCIATED		-17	/* Not Associated */
-+#define BCME_BADSSIDLEN			-18	/* Bad SSID len */
-+#define BCME_OUTOFRANGECHAN		-19	/* Out of Range Channel */
-+#define BCME_BADCHAN			-20	/* Bad Channel */
-+#define BCME_BADADDR			-21	/* Bad Address */
-+#define BCME_NORESOURCE			-22	/* Not Enough Resources */
-+#define BCME_UNSUPPORTED		-23	/* Unsupported */
-+#define BCME_BADLEN			-24	/* Bad length */
-+#define BCME_NOTREADY			-25	/* Not Ready */
-+#define BCME_EPERM			-26	/* Not Permitted */
-+#define BCME_NOMEM			-27	/* No Memory */
-+#define BCME_ASSOCIATED			-28	/* Associated */
-+#define BCME_RANGE			-29	/* Not In Range */
-+#define BCME_NOTFOUND			-30	/* Not Found */
-+#define BCME_WME_NOT_ENABLED		-31	/* WME Not Enabled */
-+#define BCME_TSPEC_NOTFOUND		-32	/* TSPEC Not Found */
-+#define BCME_ACM_NOTSUPPORTED		-33	/* ACM Not Supported */
-+#define BCME_NOT_WME_ASSOCIATION	-34	/* Not WME Association */
-+#define BCME_SDIO_ERROR			-35	/* SDIO Bus Error */
-+#define BCME_DONGLE_DOWN		-36	/* Dongle Not Accessible */
-+#define BCME_LAST			BCME_DONGLE_DOWN
-+
-+/* These are collection of BCME Error strings */
-+#define BCMERRSTRINGTABLE {		\
-+	"OK",				\
-+	"Undefined error",		\
-+	"Bad Argument",			\
-+	"Bad Option",			\
-+	"Not up",			\
-+	"Not down",			\
-+	"Not AP",			\
-+	"Not STA",			\
-+	"Bad Key Index",		\
-+	"Radio Off",			\
-+	"Not band locked",		\
-+	"No clock",			\
-+	"Bad Rate valueset",		\
-+	"Bad Band",			\
-+	"Buffer too short",		\
-+	"Buffer too long",		\
-+	"Busy",				\
-+	"Not Associated",		\
-+	"Bad SSID len",			\
-+	"Out of Range Channel",		\
-+	"Bad Channel",			\
-+	"Bad Address",			\
-+	"Not Enough Resources",		\
-+	"Unsupported",			\
-+	"Bad length",			\
-+	"Not Ready",			\
-+	"Not Permitted",		\
-+	"No Memory",			\
-+	"Associated",			\
-+	"Not In Range",			\
-+	"Not Found",			\
-+	"WME Not Enabled",		\
-+	"TSPEC Not Found",		\
-+	"ACM Not Supported",		\
-+	"Not WME Association",		\
-+	"SDIO Bus Error",		\
-+	"Dongle Not Accessible"		\
-+}
-+
-+#ifndef ABS
-+#define	ABS(a)			(((a) < 0)?-(a):(a))
-+#endif /* ABS */
-+
-+#ifndef MIN
-+#define	MIN(a, b)		(((a) < (b))?(a):(b))
-+#endif /* MIN */
-+
-+#ifndef MAX
-+#define	MAX(a, b)		(((a) > (b))?(a):(b))
-+#endif /* MAX */
-+
-+#define CEIL(x, y)		(((x) + ((y)-1)) / (y))
-+#define	ROUNDUP(x, y)		((((x)+((y)-1))/(y))*(y))
-+#define	ISALIGNED(a, x)		(((a) & ((x)-1)) == 0)
-+#define	ISPOWEROF2(x)		((((x)-1)&(x)) == 0)
-+#define VALID_MASK(mask)	!((mask) & ((mask) + 1))
-+#define	OFFSETOF(type, member)	((uint)(uintptr)&((type *)0)->member)
-+#define ARRAYSIZE(a)		(sizeof(a)/sizeof(a[0]))
-+
-+/* bit map related macros */
-+#ifndef setbit
-+#ifndef NBBY		    /* the BSD family defines NBBY */
-+#define	NBBY	8	/* 8 bits per byte */
-+#endif /* #ifndef NBBY */
-+#define	setbit(a, i)	(((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
-+#define	clrbit(a, i)	(((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-+#define	isset(a, i)	(((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
-+#define	isclr(a, i)	((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-+#endif /* setbit */
-+
-+#define	NBITS(type)	(sizeof(type) * 8)
-+#define NBITVAL(nbits)	(1 << (nbits))
-+#define MAXBITVAL(nbits)	((1 << (nbits)) - 1)
-+#define	NBITMASK(nbits)	MAXBITVAL(nbits)
-+#define MAXNBVAL(nbyte)	MAXBITVAL((nbyte) * 8)
-+
-+/* basic mux operation - can be optimized on several architectures */
-+#define MUX(pred, true, false) ((pred) ? (true) : (false))
-+
-+/* modulo inc/dec - assumes x E [0, bound - 1] */
-+#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1)
-+#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1)
-+
-+/* modulo inc/dec, bound = 2^k */
-+#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1))
-+#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1))
-+
-+/* modulo add/sub - assumes x, y E [0, bound - 1] */
-+#define MODADD(x, y, bound) \
-+    MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y))
-+#define MODSUB(x, y, bound) \
-+    MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y))
-+
-+/* module add/sub, bound = 2^k */
-+#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1))
-+#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1))
-+
-+/* crc defines */
-+#define CRC8_INIT_VALUE  0xff		/* Initial CRC8 checksum value */
-+#define CRC8_GOOD_VALUE  0x9f		/* Good final CRC8 checksum value */
-+#define CRC16_INIT_VALUE 0xffff		/* Initial CRC16 checksum value */
-+#define CRC16_GOOD_VALUE 0xf0b8		/* Good final CRC16 checksum value */
-+#define CRC32_INIT_VALUE 0xffffffff	/* Initial CRC32 checksum value */
-+#define CRC32_GOOD_VALUE 0xdebb20e3	/* Good final CRC32 checksum value */
-+
-+/* bcm_format_flags() bit description structure */
-+typedef struct bcm_bit_desc {
-+	uint32	bit;
-+	char*	name;
-+} bcm_bit_desc_t;
-+
-+/* tag_ID/length/value_buffer tuple */
-+typedef struct bcm_tlv {
-+	uint8	id;
-+	uint8	len;
-+	uint8	data[1];
-+} bcm_tlv_t;
-+
-+/* Check that bcm_tlv_t fits into the given buflen */
-+#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len))
-+
-+/* buffer length for ethernet address from bcm_ether_ntoa() */
-+#define ETHER_ADDR_STR_LEN	18	/* 18-bytes of Ethernet address buffer length */
-+
-+/* unaligned load and store macros */
-+#ifdef IL_BIGENDIAN
-+static INLINE uint32
-+load32_ua(uint8 *a)
-+{
-+	return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]);
-+}
-+
-+static INLINE void
-+store32_ua(uint8 *a, uint32 v)
-+{
-+	a[0] = (v >> 24) & 0xff;
-+	a[1] = (v >> 16) & 0xff;
-+	a[2] = (v >> 8) & 0xff;
-+	a[3] = v & 0xff;
-+}
-+
-+static INLINE uint16
-+load16_ua(uint8 *a)
-+{
-+	return ((a[0] << 8) | a[1]);
-+}
-+
-+static INLINE void
-+store16_ua(uint8 *a, uint16 v)
-+{
-+	a[0] = (v >> 8) & 0xff;
-+	a[1] = v & 0xff;
-+}
-+
-+#else
-+
-+static INLINE uint32
-+load32_ua(uint8 *a)
-+{
-+	return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]);
-+}
-+
-+static INLINE void
-+store32_ua(uint8 *a, uint32 v)
-+{
-+	a[3] = (v >> 24) & 0xff;
-+	a[2] = (v >> 16) & 0xff;
-+	a[1] = (v >> 8) & 0xff;
-+	a[0] = v & 0xff;
-+}
-+
-+static INLINE uint16
-+load16_ua(uint8 *a)
-+{
-+	return ((a[1] << 8) | a[0]);
-+}
-+
-+static INLINE void
-+store16_ua(uint8 *a, uint16 v)
-+{
-+	a[1] = (v >> 8) & 0xff;
-+	a[0] = v & 0xff;
-+}
-+
-+#endif /* IL_BIGENDIAN */
-+
-+/* externs */
-+/* crc */
-+extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc);
-+extern uint16 hndcrc16(uint8 *p, uint nbytes, uint16 crc);
-+extern uint32 hndcrc32(uint8 *p, uint nbytes, uint32 crc);
-+/* format/print */
-+extern void printfbig(char *buf);
-+
-+/* IE parsing */
-+extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen);
-+extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
-+extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
-+
-+/* bcmerror */
-+extern const char *bcmerrorstr(int bcmerror);
-+
-+/* multi-bool data type: set of bools, mbool is true if any is set */
-+typedef uint32 mbool;
-+#define mboolset(mb, bit)		(mb |= bit)		/* set one bool */
-+#define mboolclr(mb, bit)		(mb &= ~bit)		/* clear one bool */
-+#define mboolisset(mb, bit)		((mb & bit) != 0)	/* TRUE if one bool is set */
-+#define	mboolmaskset(mb, mask, val)	((mb) = (((mb) & ~(mask)) | (val)))
-+
-+/* power conversion */
-+extern uint16 bcm_qdbm_to_mw(uint8 qdbm);
-+extern uint8 bcm_mw_to_qdbm(uint16 mw);
-+
-+/* generic datastruct to help dump routines */
-+struct fielddesc {
-+	char 	*nameandfmt;
-+	uint32 	offset;
-+	uint32 	len;
-+};
-+
-+/* Buffer structure for collecting string-formatted data 
-+* using bcm_bprintf() API.
-+* Use bcm_binit() to initialize before use
-+*/
-+struct bcmstrbuf
-+{
-+	char *buf;	/* pointer to current position in origbuf */
-+	uint size;	/* current (residual) size in bytes */
-+	char *origbuf;	/* unmodified pointer to orignal buffer */
-+	uint origsize;	/* unmodified orignal buffer size in bytes */
-+};
-+
-+extern void bcm_binit(struct bcmstrbuf *b, char *buf, uint size);
-+extern int bcm_bprintf(struct bcmstrbuf *b, const char *fmt, ...);
-+
-+typedef  uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset);
-+extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str,
-+                          char *buf, uint32 bufsize);
-+
-+extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len);
-+extern uint bcm_bitcount(uint8 *bitmap, uint bytelength);
-+
-+#endif	/* _bcmutils_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/hndcpu.h linux.dev/arch/mips/bcm947xx/include/hndcpu.h
---- linux.old/arch/mips/bcm947xx/include/hndcpu.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/hndcpu.h	2006-04-27 22:14:38.000000000 +0200
-@@ -0,0 +1,28 @@
-+/*
-+ * HND SiliconBackplane MIPS/ARM cores software interface.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: hndcpu.h,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef _hndcpu_h_
-+#define _hndcpu_h_
-+
-+#if defined(mips)
-+#include <hndmips.h>
-+#elif defined(__ARM_ARCH_4T__)
-+#include <hndarm.h>
-+#endif
-+
-+extern uint sb_irq(sb_t *sbh);
-+extern uint32 sb_cpu_clock(sb_t *sbh);
-+extern void sb_cpu_wait(void);
-+
-+#endif /* _hndcpu_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/hndmips.h linux.dev/arch/mips/bcm947xx/include/hndmips.h
---- linux.old/arch/mips/bcm947xx/include/hndmips.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/hndmips.h	2006-04-27 20:43:42.000000000 +0200
-@@ -0,0 +1,45 @@
-+/*
-+ * HND SiliconBackplane MIPS core software interface.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: hndmips.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef _hndmips_h_
-+#define _hndmips_h_
-+
-+extern void sb_mips_init(sb_t *sbh, uint shirq_map_base);
-+extern bool sb_mips_setclock(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock);
-+extern void enable_pfc(uint32 mode);
-+extern uint32 sb_memc_get_ncdl(sb_t *sbh);
-+
-+#if defined(BCMPERFSTATS)
-+/* enable counting - exclusive version. Only one set of counters allowed at a time */
-+extern void hndmips_perf_instrcount_enable(void);
-+extern void hndmips_perf_icachecount_enable(void);
-+extern void hndmips_perf_dcachecount_enable(void);
-+/* start and stop counting */
-+#define hndmips_perf_start01() \
-+	MTC0(C0_PERFORMANCE, 4, MFC0(C0_PERFORMANCE, 4) | 0x80008000)
-+#define hndmips_perf_stop01() \
-+	MTC0(C0_PERFORMANCE, 4, MFC0(C0_PERFORMANCE, 4) & ~0x80008000)
-+/* retrieve coutners - counters *decrement* */
-+#define hndmips_perf_read0() -(long)(MFC0(C0_PERFORMANCE, 0))
-+#define hndmips_perf_read1() -(long)(MFC0(C0_PERFORMANCE, 1))
-+#define hndmips_perf_read2() -(long)(MFC0(C0_PERFORMANCE, 2))
-+/* enable counting - modular version. Each counters can be enabled separately. */
-+extern void hndmips_perf_icache_hit_enable(void);
-+extern void hndmips_perf_icache_miss_enable(void);
-+extern uint32 hndmips_perf_read_instrcount(void);
-+extern uint32 hndmips_perf_read_cache_miss(void);
-+extern uint32 hndmips_perf_read_cache_hit(void);
-+#endif /*  defined(BCMINTERNAL) || defined (BCMPERFSTATS) */
-+
-+#endif /* _hndmips_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/hndpci.h linux.dev/arch/mips/bcm947xx/include/hndpci.h
---- linux.old/arch/mips/bcm947xx/include/hndpci.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/hndpci.h	2006-04-27 20:36:48.000000000 +0200
-@@ -0,0 +1,30 @@
-+/*
-+ * HND SiliconBackplane PCI core software interface.
-+ *
-+ * $Id: hndpci.h,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ */
-+
-+#ifndef _hndpci_h_
-+#define _hndpci_h_
-+
-+extern int sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf,
-+                             int len);
-+extern int extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf,
-+                              int len);
-+extern int sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf,
-+                              int len);
-+extern int extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf,
-+                               int len);
-+extern void sbpci_ban(uint16 core);
-+extern int sbpci_init(sb_t *sbh);
-+extern int sbpci_init_pci(sb_t *sbh);
-+extern void sbpci_check(sb_t *sbh);
-+
-+#endif /* _hndpci_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/linuxver.h linux.dev/arch/mips/bcm947xx/include/linuxver.h
---- linux.old/arch/mips/bcm947xx/include/linuxver.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/linuxver.h	2006-04-27 20:10:08.000000000 +0200
-@@ -0,0 +1,417 @@
-+/*
-+ * Linux-specific abstractions to gain some independence from linux kernel versions.
-+ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: linuxver.h,v 1.1.1.10 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef _linuxver_h_
-+#define _linuxver_h_
-+
-+#include <linux/config.h>
-+#include <linux/version.h>
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0))
-+/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */
-+#ifdef __UNDEF_NO_VERSION__
-+#undef __NO_VERSION__
-+#else
-+#define __NO_VERSION__
-+#endif
-+#endif	/* LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0) */
-+
-+#if defined(MODULE) && defined(MODVERSIONS)
-+#include <linux/modversions.h>
-+#endif
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 5, 0)
-+#include <linux/moduleparam.h>
-+#endif
-+
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0)
-+#define module_param(_name_, _type_, _perm_)	MODULE_PARM(_name_, "i")
-+#define module_param_string(_name_, _string_, _size_, _perm_) \
-+		MODULE_PARM(_string_, "c" __MODULE_STRING(_size_))
-+#endif
-+
-+/* linux/malloc.h is deprecated, use linux/slab.h instead. */
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 9))
-+#include <linux/malloc.h>
-+#else
-+#include <linux/slab.h>
-+#endif
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/string.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+#include <linux/netdevice.h>
-+#include <asm/io.h>
-+
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41))
-+#include <linux/workqueue.h>
-+#else
-+#include <linux/tqueue.h>
-+#ifndef work_struct
-+#define work_struct tq_struct
-+#endif
-+#ifndef INIT_WORK
-+#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data))
-+#endif
-+#ifndef schedule_work
-+#define schedule_work(_work) schedule_task((_work))
-+#endif
-+#ifndef flush_scheduled_work
-+#define flush_scheduled_work() flush_scheduled_tasks()
-+#endif
-+#endif	/* LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41) */
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
-+/* Some distributions have their own 2.6.x compatibility layers */
-+#ifndef IRQ_NONE
-+typedef void irqreturn_t;
-+#define IRQ_NONE
-+#define IRQ_HANDLED
-+#define IRQ_RETVAL(x)
-+#endif
-+#else
-+typedef irqreturn_t(*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs);
-+#endif	/* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0) */
-+
-+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
-+
-+#include <pcmcia/version.h>
-+#include <pcmcia/cs_types.h>
-+#include <pcmcia/cs.h>
-+#include <pcmcia/cistpl.h>
-+#include <pcmcia/cisreg.h>
-+#include <pcmcia/ds.h>
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 69))
-+/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which
-+ * does this, but it's not in 2.4 so we do our own for now.
-+ */
-+static inline void
-+cs_error(client_handle_t handle, int func, int ret)
-+{
-+	error_info_t err = { func, ret };
-+	CardServices(ReportError, handle, &err);
-+}
-+#endif
-+
-+#endif /* CONFIG_PCMCIA */
-+
-+#ifndef __exit
-+#define __exit
-+#endif
-+#ifndef __devexit
-+#define __devexit
-+#endif
-+#ifndef __devinit
-+#define __devinit	__init
-+#endif
-+#ifndef __devinitdata
-+#define __devinitdata
-+#endif
-+#ifndef __devexit_p
-+#define __devexit_p(x)	x
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 0))
-+
-+#define pci_get_drvdata(dev)		(dev)->sysdata
-+#define pci_set_drvdata(dev, value)	(dev)->sysdata = (value)
-+
-+/*
-+ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration
-+ */
-+
-+struct pci_device_id {
-+	unsigned int vendor, device;		/* Vendor and device ID or PCI_ANY_ID */
-+	unsigned int subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
-+	unsigned int class, class_mask;		/* (class,subclass,prog-if) triplet */
-+	unsigned long driver_data;		/* Data private to the driver */
-+};
-+
-+struct pci_driver {
-+	struct list_head node;
-+	char *name;
-+	const struct pci_device_id *id_table;	/* NULL if wants all devices */
-+	int (*probe)(struct pci_dev *dev,
-+	             const struct pci_device_id *id); /* New device inserted */
-+	void (*remove)(struct pci_dev *dev);	/* Device removed (NULL if not a hot-plug
-+						 * capable driver)
-+						 */
-+	void (*suspend)(struct pci_dev *dev);	/* Device suspended */
-+	void (*resume)(struct pci_dev *dev);	/* Device woken up */
-+};
-+
-+#define MODULE_DEVICE_TABLE(type, name)
-+#define PCI_ANY_ID (~0)
-+
-+/* compatpci.c */
-+#define pci_module_init pci_register_driver
-+extern int pci_register_driver(struct pci_driver *drv);
-+extern void pci_unregister_driver(struct pci_driver *drv);
-+
-+#endif /* PCI registration */
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18))
-+#ifdef MODULE
-+#define module_init(x) int init_module(void) { return x(); }
-+#define module_exit(x) void cleanup_module(void) { x(); }
-+#else
-+#define module_init(x)	__initcall(x);
-+#define module_exit(x)	__exitcall(x);
-+#endif
-+#endif	/* LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18) */
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 48))
-+#define list_for_each(pos, head) \
-+	for (pos = (head)->next; pos != (head); pos = pos->next)
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 13))
-+#define pci_resource_start(dev, bar)	((dev)->base_address[(bar)])
-+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 44))
-+#define pci_resource_start(dev, bar)	((dev)->resource[(bar)].start)
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 23))
-+#define pci_enable_device(dev) do { } while (0)
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 14))
-+#define net_device device
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 42))
-+
-+/*
-+ * DMA mapping
-+ *
-+ * See linux/Documentation/DMA-mapping.txt
-+ */
-+
-+#ifndef PCI_DMA_TODEVICE
-+#define	PCI_DMA_TODEVICE	1
-+#define	PCI_DMA_FROMDEVICE	2
-+#endif
-+
-+typedef u32 dma_addr_t;
-+
-+/* Pure 2^n version of get_order */
-+static inline int get_order(unsigned long size)
-+{
-+	int order;
-+
-+	size = (size-1) >> (PAGE_SHIFT-1);
-+	order = -1;
-+	do {
-+		size >>= 1;
-+		order++;
-+	} while (size);
-+	return order;
-+}
-+
-+static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
-+                                         dma_addr_t *dma_handle)
-+{
-+	void *ret;
-+	int gfp = GFP_ATOMIC | GFP_DMA;
-+
-+	ret = (void *)__get_free_pages(gfp, get_order(size));
-+
-+	if (ret != NULL) {
-+		memset(ret, 0, size);
-+		*dma_handle = virt_to_bus(ret);
-+	}
-+	return ret;
-+}
-+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
-+                                       void *vaddr, dma_addr_t dma_handle)
-+{
-+	free_pages((unsigned long)vaddr, get_order(size));
-+}
-+#ifdef ILSIM
-+extern uint pci_map_single(void *dev, void *va, uint size, int direction);
-+extern void pci_unmap_single(void *dev, uint pa, uint size, int direction);
-+#else
-+#define pci_map_single(cookie, address, size, dir)	virt_to_bus(address)
-+#define pci_unmap_single(cookie, address, size, dir)
-+#endif
-+
-+#endif /* DMA mapping */
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 43))
-+
-+#define dev_kfree_skb_any(a)		dev_kfree_skb(a)
-+#define netif_down(dev)			do { (dev)->start = 0; } while (0)
-+
-+/* pcmcia-cs provides its own netdevice compatibility layer */
-+#ifndef _COMPAT_NETDEVICE_H
-+
-+/*
-+ * SoftNet
-+ *
-+ * For pre-softnet kernels we need to tell the upper layer not to
-+ * re-enter start_xmit() while we are in there. However softnet
-+ * guarantees not to enter while we are in there so there is no need
-+ * to do the netif_stop_queue() dance unless the transmit queue really
-+ * gets stuck. This should also improve performance according to tests
-+ * done by Aman Singla.
-+ */
-+
-+#define dev_kfree_skb_irq(a)	dev_kfree_skb(a)
-+#define netif_wake_queue(dev) \
-+		do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while (0)
-+#define netif_stop_queue(dev)	set_bit(0, &(dev)->tbusy)
-+
-+static inline void netif_start_queue(struct net_device *dev)
-+{
-+	dev->tbusy = 0;
-+	dev->interrupt = 0;
-+	dev->start = 1;
-+}
-+
-+#define netif_queue_stopped(dev)	(dev)->tbusy
-+#define netif_running(dev)		(dev)->start
-+
-+#endif /* _COMPAT_NETDEVICE_H */
-+
-+#define netif_device_attach(dev)	netif_start_queue(dev)
-+#define netif_device_detach(dev)	netif_stop_queue(dev)
-+
-+/* 2.4.x renamed bottom halves to tasklets */
-+#define tasklet_struct				tq_struct
-+static inline void tasklet_schedule(struct tasklet_struct *tasklet)
-+{
-+	queue_task(tasklet, &tq_immediate);
-+	mark_bh(IMMEDIATE_BH);
-+}
-+
-+static inline void tasklet_init(struct tasklet_struct *tasklet,
-+                                void (*func)(unsigned long),
-+                                unsigned long data)
-+{
-+	tasklet->next = NULL;
-+	tasklet->sync = 0;
-+	tasklet->routine = (void (*)(void *))func;
-+	tasklet->data = (void *)data;
-+}
-+#define tasklet_kill(tasklet)	{ do{} while (0); }
-+
-+/* 2.4.x introduced del_timer_sync() */
-+#define del_timer_sync(timer) del_timer(timer)
-+
-+#else
-+
-+#define netif_down(dev)
-+
-+#endif /* SoftNet */
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3))
-+
-+/*
-+ * Emit code to initialise a tq_struct's routine and data pointers
-+ */
-+#define PREPARE_TQUEUE(_tq, _routine, _data)			\
-+	do {							\
-+		(_tq)->routine = _routine;			\
-+		(_tq)->data = _data;				\
-+	} while (0)
-+
-+/*
-+ * Emit code to initialise all of a tq_struct
-+ */
-+#define INIT_TQUEUE(_tq, _routine, _data)			\
-+	do {							\
-+		INIT_LIST_HEAD(&(_tq)->list);			\
-+		(_tq)->sync = 0;				\
-+		PREPARE_TQUEUE((_tq), (_routine), (_data));	\
-+	} while (0)
-+
-+#endif	/* LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3) */
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 6))
-+
-+/* Power management related routines */
-+
-+static inline int
-+pci_save_state(struct pci_dev *dev, u32 *buffer)
-+{
-+	int i;
-+	if (buffer) {
-+		for (i = 0; i < 16; i++)
-+			pci_read_config_dword(dev, i * 4, &buffer[i]);
-+	}
-+	return 0;
-+}
-+
-+static inline int
-+pci_restore_state(struct pci_dev *dev, u32 *buffer)
-+{
-+	int i;
-+
-+	if (buffer) {
-+		for (i = 0; i < 16; i++)
-+			pci_write_config_dword(dev, i * 4, buffer[i]);
-+	}
-+	/*
-+	 * otherwise, write the context information we know from bootup.
-+	 * This works around a problem where warm-booting from Windows
-+	 * combined with a D3(hot)->D0 transition causes PCI config
-+	 * header data to be forgotten.
-+	 */
-+	else {
-+		for (i = 0; i < 6; i ++)
-+			pci_write_config_dword(dev,
-+			                       PCI_BASE_ADDRESS_0 + (i * 4),
-+			                       pci_resource_start(dev, i));
-+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-+	}
-+	return 0;
-+}
-+
-+#endif /* PCI power management */
-+
-+/* Old cp0 access macros deprecated in 2.4.19 */
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 19))
-+#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
-+#endif
-+
-+/* Module refcount handled internally in 2.6.x */
-+#ifndef SET_MODULE_OWNER
-+#define SET_MODULE_OWNER(dev)		do {} while (0)
-+#define OLD_MOD_INC_USE_COUNT		MOD_INC_USE_COUNT
-+#define OLD_MOD_DEC_USE_COUNT		MOD_DEC_USE_COUNT
-+#else
-+#define OLD_MOD_INC_USE_COUNT		do {} while (0)
-+#define OLD_MOD_DEC_USE_COUNT		do {} while (0)
-+#endif
-+
-+#ifndef SET_NETDEV_DEV
-+#define SET_NETDEV_DEV(net, pdev)	do {} while (0)
-+#endif
-+
-+#ifndef HAVE_FREE_NETDEV
-+#define free_netdev(dev)		kfree(dev)
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
-+/* struct packet_type redefined in 2.6.x */
-+#define af_packet_priv			data
-+#endif
-+
-+#endif /* _linuxver_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/mipsinc.h linux.dev/arch/mips/bcm947xx/include/mipsinc.h
---- linux.old/arch/mips/bcm947xx/include/mipsinc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/mipsinc.h	2006-04-27 22:12:20.000000000 +0200
-@@ -0,0 +1,541 @@
-+/*
-+ * HND Run Time Environment for standalone MIPS programs.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: mipsinc.h,v 1.1.1.5 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef	_MISPINC_H
-+#define _MISPINC_H
-+
-+
-+/* MIPS defines */
-+
-+#ifdef	_LANGUAGE_ASSEMBLY
-+
-+/*
-+ * Symbolic register names for 32 bit ABI
-+ */
-+#define zero	$0	/* wired zero */
-+#define AT	$1	/* assembler temp - uppercase because of ".set at" */
-+#define v0	$2	/* return value */
-+#define v1	$3
-+#define a0	$4	/* argument registers */
-+#define a1	$5
-+#define a2	$6
-+#define a3	$7
-+#define t0	$8	/* caller saved */
-+#define t1	$9
-+#define t2	$10
-+#define t3	$11
-+#define t4	$12
-+#define t5	$13
-+#define t6	$14
-+#define t7	$15
-+#define s0	$16	/* callee saved */
-+#define s1	$17
-+#define s2	$18
-+#define s3	$19
-+#define s4	$20
-+#define s5	$21
-+#define s6	$22
-+#define s7	$23
-+#define t8	$24	/* caller saved */
-+#define t9	$25
-+#define jp	$25	/* PIC jump register */
-+#define k0	$26	/* kernel scratch */
-+#define k1	$27
-+#define gp	$28	/* global pointer */
-+#define sp	$29	/* stack pointer */
-+#define fp	$30	/* frame pointer */
-+#define s8	$30	/* same like fp! */
-+#define ra	$31	/* return address */
-+
-+
-+/* CP0 Registers */
-+
-+#define C0_INX		$0
-+#define C0_RAND		$1
-+#define C0_TLBLO0	$2
-+#define C0_TLBLO	C0_TLBLO0
-+#define C0_TLBLO1	$3
-+#define C0_CTEXT	$4
-+#define C0_PGMASK	$5
-+#define C0_WIRED	$6
-+#define C0_BADVADDR	$8
-+#define C0_COUNT 	$9
-+#define C0_TLBHI	$10
-+#define C0_COMPARE	$11
-+#define C0_SR		$12
-+#define C0_STATUS	C0_SR
-+#define C0_CAUSE	$13
-+#define C0_EPC		$14
-+#define C0_PRID		$15
-+#define C0_CONFIG	$16
-+#define C0_LLADDR	$17
-+#define C0_WATCHLO	$18
-+#define C0_WATCHHI	$19
-+#define C0_XCTEXT	$20
-+#define C0_DIAGNOSTIC	$22
-+#define C0_BROADCOM	C0_DIAGNOSTIC
-+#define	C0_PERFORMANCE	$25
-+#define C0_ECC		$26
-+#define C0_CACHEERR	$27
-+#define C0_TAGLO	$28
-+#define C0_TAGHI	$29
-+#define C0_ERREPC	$30
-+#define C0_DESAVE	$31
-+
-+/*
-+ * LEAF - declare leaf routine
-+ */
-+#define LEAF(symbol)				\
-+		.globl	symbol;			\
-+		.align	2;			\
-+		.type	symbol, @function;	\
-+		.ent	symbol, 0;		\
-+symbol:		.frame	sp, 0, ra
-+
-+/*
-+ * END - mark end of function
-+ */
-+#define END(function)				\
-+		.end	function;		\
-+		.size	function, . - function
-+
-+#define _ULCAST_
-+
-+#define MFC0_SEL(dst, src, sel) \
-+		.word\t(0x40000000 | ((dst) << 16) | ((src) << 11) | (sel))
-+
-+
-+#define MTC0_SEL(dst, src, sel) \
-+		.word\t(0x40800000 | ((dst) << 16) | ((src) << 11) | (sel))
-+
-+#else
-+
-+/*
-+ * The following macros are especially useful for __asm__
-+ * inline assembler.
-+ */
-+#ifndef __STR
-+#define __STR(x) #x
-+#endif
-+#ifndef STR
-+#define STR(x) __STR(x)
-+#endif
-+
-+#define _ULCAST_ (unsigned long)
-+
-+
-+/* CP0 Registers */
-+
-+#define C0_INX		0		/* CP0: TLB Index */
-+#define C0_RAND		1		/* CP0: TLB Random */
-+#define C0_TLBLO0	2		/* CP0: TLB EntryLo0 */
-+#define C0_TLBLO	C0_TLBLO0	/* CP0: TLB EntryLo0 */
-+#define C0_TLBLO1	3		/* CP0: TLB EntryLo1 */
-+#define C0_CTEXT	4		/* CP0: Context */
-+#define C0_PGMASK	5		/* CP0: TLB PageMask */
-+#define C0_WIRED	6		/* CP0: TLB Wired */
-+#define C0_BADVADDR	8		/* CP0: Bad Virtual Address */
-+#define C0_COUNT 	9		/* CP0: Count */
-+#define C0_TLBHI	10		/* CP0: TLB EntryHi */
-+#define C0_COMPARE	11		/* CP0: Compare */
-+#define C0_SR		12		/* CP0: Processor Status */
-+#define C0_STATUS	C0_SR		/* CP0: Processor Status */
-+#define C0_CAUSE	13		/* CP0: Exception Cause */
-+#define C0_EPC		14		/* CP0: Exception PC */
-+#define C0_PRID		15		/* CP0: Processor Revision Indentifier */
-+#define C0_CONFIG	16		/* CP0: Config */
-+#define C0_LLADDR	17		/* CP0: LLAddr */
-+#define C0_WATCHLO	18		/* CP0: WatchpointLo */
-+#define C0_WATCHHI	19		/* CP0: WatchpointHi */
-+#define C0_XCTEXT	20		/* CP0: XContext */
-+#define C0_DIAGNOSTIC	22		/* CP0: Diagnostic */
-+#define C0_BROADCOM	C0_DIAGNOSTIC	/* CP0: Broadcom Register */
-+#define	C0_PERFORMANCE	25		/* CP0: Performance Counter/Control Registers */
-+#define C0_ECC		26		/* CP0: ECC */
-+#define C0_CACHEERR	27		/* CP0: CacheErr */
-+#define C0_TAGLO	28		/* CP0: TagLo */
-+#define C0_TAGHI	29		/* CP0: TagHi */
-+#define C0_ERREPC	30		/* CP0: ErrorEPC */
-+#define C0_DESAVE	31		/* CP0: DebugSave */
-+
-+#endif	/* _LANGUAGE_ASSEMBLY */
-+
-+/*
-+ * Memory segments (32bit kernel mode addresses)
-+ */
-+#undef KUSEG
-+#undef KSEG0
-+#undef KSEG1
-+#undef KSEG2
-+#undef KSEG3
-+#define KUSEG		0x00000000
-+#define KSEG0		0x80000000
-+#define KSEG1		0xa0000000
-+#define KSEG2		0xc0000000
-+#define KSEG3		0xe0000000
-+#define PHYSADDR_MASK	0x1fffffff
-+
-+/*
-+ * Map an address to a certain kernel segment
-+ */
-+#undef PHYSADDR
-+#undef KSEG0ADDR
-+#undef KSEG1ADDR
-+#undef KSEG2ADDR
-+#undef KSEG3ADDR
-+
-+#define PHYSADDR(a)	(_ULCAST_(a) & PHYSADDR_MASK)
-+#define KSEG0ADDR(a)	((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0)
-+#define KSEG1ADDR(a)	((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1)
-+#define KSEG2ADDR(a)	((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2)
-+#define KSEG3ADDR(a)	((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3)
-+
-+
-+#ifndef	Index_Invalidate_I
-+/*
-+ * Cache Operations
-+ */
-+#define Index_Invalidate_I	0x00
-+#define Index_Writeback_Inv_D	0x01
-+#define Index_Invalidate_SI	0x02
-+#define Index_Writeback_Inv_SD	0x03
-+#define Index_Load_Tag_I	0x04
-+#define Index_Load_Tag_D	0x05
-+#define Index_Load_Tag_SI	0x06
-+#define Index_Load_Tag_SD	0x07
-+#define Index_Store_Tag_I	0x08
-+#define Index_Store_Tag_D	0x09
-+#define Index_Store_Tag_SI	0x0A
-+#define Index_Store_Tag_SD	0x0B
-+#define Create_Dirty_Excl_D	0x0d
-+#define Create_Dirty_Excl_SD	0x0f
-+#define Hit_Invalidate_I	0x10
-+#define Hit_Invalidate_D	0x11
-+#define Hit_Invalidate_SI	0x12
-+#define Hit_Invalidate_SD	0x13
-+#define Fill_I			0x14
-+#define Hit_Writeback_Inv_D	0x15
-+					/* 0x16 is unused */
-+#define Hit_Writeback_Inv_SD	0x17
-+#define R5K_Page_Invalidate_S	0x17
-+#define Hit_Writeback_I		0x18
-+#define Hit_Writeback_D		0x19
-+					/* 0x1a is unused */
-+#define Hit_Writeback_SD	0x1b
-+					/* 0x1c is unused */
-+					/* 0x1e is unused */
-+#define Hit_Set_Virtual_SI	0x1e
-+#define Hit_Set_Virtual_SD	0x1f
-+#endif	/* !Index_Invalidate_I */
-+
-+
-+/*
-+ * R4x00 interrupt enable / cause bits
-+ */
-+#define IE_SW0			(_ULCAST_(1) <<  8)
-+#define IE_SW1			(_ULCAST_(1) <<  9)
-+#define IE_IRQ0			(_ULCAST_(1) << 10)
-+#define IE_IRQ1			(_ULCAST_(1) << 11)
-+#define IE_IRQ2			(_ULCAST_(1) << 12)
-+#define IE_IRQ3			(_ULCAST_(1) << 13)
-+#define IE_IRQ4			(_ULCAST_(1) << 14)
-+#define IE_IRQ5			(_ULCAST_(1) << 15)
-+
-+#ifndef	ST0_UM
-+/*
-+ * Bitfields in the mips32 cp0 status register
-+ */
-+#define ST0_IE			0x00000001
-+#define ST0_EXL			0x00000002
-+#define ST0_ERL			0x00000004
-+#define ST0_UM			0x00000010
-+#define ST0_SWINT0		0x00000100
-+#define ST0_SWINT1		0x00000200
-+#define ST0_HWINT0		0x00000400
-+#define ST0_HWINT1		0x00000800
-+#define ST0_HWINT2		0x00001000
-+#define ST0_HWINT3		0x00002000
-+#define ST0_HWINT4		0x00004000
-+#define ST0_HWINT5		0x00008000
-+#define ST0_IM			0x0000ff00
-+#define ST0_NMI			0x00080000
-+#define ST0_SR			0x00100000
-+#define ST0_TS			0x00200000
-+#define ST0_BEV			0x00400000
-+#define ST0_RE			0x02000000
-+#define ST0_RP			0x08000000
-+#define ST0_CU			0xf0000000
-+#define ST0_CU0			0x10000000
-+#define ST0_CU1			0x20000000
-+#define ST0_CU2			0x40000000
-+#define ST0_CU3			0x80000000
-+#endif	/* !ST0_UM */
-+
-+
-+/*
-+ * Bitfields in the mips32 cp0 cause register
-+ */
-+#define C_EXC			0x0000007c
-+#define C_EXC_SHIFT		2
-+#define C_INT			0x0000ff00
-+#define C_INT_SHIFT		8
-+#define C_SW0			(_ULCAST_(1) <<  8)
-+#define C_SW1			(_ULCAST_(1) <<  9)
-+#define C_IRQ0			(_ULCAST_(1) << 10)
-+#define C_IRQ1			(_ULCAST_(1) << 11)
-+#define C_IRQ2			(_ULCAST_(1) << 12)
-+#define C_IRQ3			(_ULCAST_(1) << 13)
-+#define C_IRQ4			(_ULCAST_(1) << 14)
-+#define C_IRQ5			(_ULCAST_(1) << 15)
-+#define C_WP			0x00400000
-+#define C_IV			0x00800000
-+#define C_CE			0x30000000
-+#define C_CE_SHIFT		28
-+#define C_BD			0x80000000
-+
-+/* Values in C_EXC */
-+#define EXC_INT			0
-+#define EXC_TLBM		1
-+#define EXC_TLBL		2
-+#define EXC_TLBS		3
-+#define EXC_AEL			4
-+#define EXC_AES			5
-+#define EXC_IBE			6
-+#define EXC_DBE			7
-+#define EXC_SYS			8
-+#define EXC_BPT			9
-+#define EXC_RI			10
-+#define EXC_CU			11
-+#define EXC_OV			12
-+#define EXC_TR			13
-+#define EXC_WATCH		23
-+#define EXC_MCHK		24
-+
-+
-+/*
-+ * Bits in the cp0 config register.
-+ */
-+#define CONF_CM_CACHABLE_NO_WA		0
-+#define CONF_CM_CACHABLE_WA		1
-+#define CONF_CM_UNCACHED		2
-+#define CONF_CM_CACHABLE_NONCOHERENT	3
-+#define CONF_CM_CACHABLE_CE		4
-+#define CONF_CM_CACHABLE_COW		5
-+#define CONF_CM_CACHABLE_CUW		6
-+#define CONF_CM_CACHABLE_ACCELERATED	7
-+#define CONF_CM_CMASK			7
-+#define CONF_CU				(_ULCAST_(1) <<  3)
-+#define CONF_DB				(_ULCAST_(1) <<  4)
-+#define CONF_IB				(_ULCAST_(1) <<  5)
-+#define CONF_SE				(_ULCAST_(1) << 12)
-+#ifndef CONF_BE				    /* duplicate in mipsregs.h */
-+#define CONF_BE				(_ULCAST_(1) << 15)
-+#endif
-+#define CONF_SC				(_ULCAST_(1) << 17)
-+#define CONF_AC				(_ULCAST_(1) << 23)
-+#define CONF_HALT			(_ULCAST_(1) << 25)
-+#ifndef CONF_M				    /* duplicate in mipsregs.h */
-+#define CONF_M				(_ULCAST_(1) << 31)
-+#endif
-+
-+
-+/*
-+ * Bits in the cp0 config register select 1.
-+ */
-+#define CONF1_FP		0x00000001	/* FPU present */
-+#define CONF1_EP		0x00000002	/* EJTAG present */
-+#define CONF1_CA		0x00000004	/* mips16 implemented */
-+#define CONF1_WR		0x00000008	/* Watch registers present */
-+#define CONF1_PC		0x00000010	/* Performance counters present */
-+#define CONF1_DA_SHIFT		7		/* D$ associativity */
-+#define CONF1_DA_MASK		0x00000380
-+#define CONF1_DA_BASE		1
-+#define CONF1_DL_SHIFT		10		/* D$ line size */
-+#define CONF1_DL_MASK		0x00001c00
-+#define CONF1_DL_BASE		2
-+#define CONF1_DS_SHIFT		13		/* D$ sets/way */
-+#define CONF1_DS_MASK		0x0000e000
-+#define CONF1_DS_BASE		64
-+#define CONF1_IA_SHIFT		16		/* I$ associativity */
-+#define CONF1_IA_MASK		0x00070000
-+#define CONF1_IA_BASE		1
-+#define CONF1_IL_SHIFT		19		/* I$ line size */
-+#define CONF1_IL_MASK		0x00380000
-+#define CONF1_IL_BASE		2
-+#define CONF1_IS_SHIFT		22		/* Instruction cache sets/way */
-+#define CONF1_IS_MASK		0x01c00000
-+#define CONF1_IS_BASE		64
-+#define CONF1_MS_MASK		0x7e000000	/* Number of tlb entries */
-+#define CONF1_MS_SHIFT		25
-+
-+/* PRID register */
-+#define PRID_COPT_MASK		0xff000000
-+#define PRID_COMP_MASK		0x00ff0000
-+#define PRID_IMP_MASK		0x0000ff00
-+#define PRID_REV_MASK		0x000000ff
-+
-+#define PRID_COMP_LEGACY	0x000000
-+#define PRID_COMP_MIPS		0x010000
-+#define PRID_COMP_BROADCOM	0x020000
-+#define PRID_COMP_ALCHEMY	0x030000
-+#define PRID_COMP_SIBYTE	0x040000
-+#define PRID_IMP_BCM4710	0x4000
-+#define PRID_IMP_BCM3302	0x9000
-+#define PRID_IMP_BCM3303	0x9100
-+
-+#define PRID_IMP_UNKNOWN	0xff00
-+
-+#define BCM330X(id) \
-+		(((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == \
-+		 (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) || \
-+		((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == \
-+		 (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
-+
-+/* Bits in C0_BROADCOM */
-+#define BRCM_PFC_AVAIL		0x20000000	/* PFC is available */
-+#define BRCM_DC_ENABLE		0x40000000	/* Enable Data $ */
-+#define BRCM_IC_ENABLE		0x80000000	/* Enable Instruction $ */
-+#define BRCM_PFC_ENABLE		0x00400000	/* Obsolete? Enable PFC (at least on 4310) */
-+#define BRCM_CLF_ENABLE		0x00100000	/* Enable cache line first feature */
-+
-+/* PreFetch Cache aka Read Ahead Cache */
-+
-+#define PFC_CR0			0xff400000	/* control reg 0 */
-+#define PFC_CR1			0xff400004	/* control reg 1 */
-+
-+/* PFC operations */
-+#define PFC_I			0x00000001	/* Enable PFC use for instructions */
-+#define PFC_D			0x00000002	/* Enable PFC use for data */
-+#define PFC_PFI			0x00000004	/* Enable seq. prefetch for instructions */
-+#define PFC_PFD			0x00000008	/* Enable seq. prefetch for data */
-+#define PFC_CINV		0x00000010	/* Enable selective (i/d) cacheop flushing */
-+#define PFC_NCH			0x00000020	/* Disable flushing based on cacheops */
-+#define PFC_DPF			0x00000040	/* Enable directional prefetching */
-+#define PFC_FLUSH		0x00000100	/* Flush the PFC */
-+#define PFC_BRR			0x40000000	/* Bus error indication */
-+#define PFC_PWR			0x80000000	/* Disable power saving (clock gating) */
-+
-+/* Handy defaults */
-+#define PFC_DISABLED		0
-+#define PFC_AUTO			0xffffffff	/* auto select the default mode */
-+#define PFC_INST		(PFC_I | PFC_PFI | PFC_CINV)
-+#define PFC_INST_NOPF		(PFC_I | PFC_CINV)
-+#define PFC_DATA		(PFC_D | PFC_PFD | PFC_CINV)
-+#define PFC_DATA_NOPF		(PFC_D | PFC_CINV)
-+#define PFC_I_AND_D		(PFC_INST | PFC_DATA)
-+#define PFC_I_AND_D_NOPF	(PFC_INST_NOPF | PFC_DATA_NOPF)
-+
-+#ifndef	_LANGUAGE_ASSEMBLY
-+
-+/*
-+ * Macros to access the system control coprocessor
-+ */
-+
-+#define MFC0(source, sel)					\
-+({								\
-+	int __res;						\
-+	__asm__ __volatile__("					\
-+	.set\tnoreorder;					\
-+	.set\tnoat;						\
-+	.word\t"STR(0x40010000 | ((source) << 11) | (sel))";	\
-+	move\t%0, $1;						\
-+	.set\tat;						\
-+	.set\treorder"						\
-+	:"=r" (__res)						\
-+	:							\
-+	:"$1");							\
-+	__res;							\
-+})
-+
-+#define MTC0(source, sel, value)				\
-+do {								\
-+	__asm__ __volatile__("					\
-+	.set\tnoreorder;					\
-+	.set\tnoat;						\
-+	move\t$1, %z0;						\
-+	.word\t"STR(0x40810000 | ((source) << 11) | (sel))";	\
-+	.set\tat;						\
-+	.set\treorder"						\
-+	:							\
-+	:"jr" (value)						\
-+	:"$1");							\
-+} while (0)
-+
-+#define get_c0_count()						\
-+({								\
-+	int __res;						\
-+	__asm__ __volatile__("					\
-+	.set\tnoreorder;					\
-+	.set\tnoat;						\
-+	mfc0\t%0, $9;						\
-+	.set\tat;						\
-+	.set\treorder"						\
-+	:"=r" (__res));						\
-+	__res;							\
-+})
-+
-+static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize)
-+{
-+	uint lsz, sets, ways;
-+
-+	/* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
-+	if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT)))
-+		lsz = CONF1_IL_BASE << lsz;
-+	sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT);
-+	ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT);
-+	*size = lsz * sets * ways;
-+	*lsize = lsz;
-+}
-+
-+static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize)
-+{
-+	uint lsz, sets, ways;
-+
-+	/* Data Cache Size = Associativity * Line Size * Sets Per Way */
-+	if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT)))
-+		lsz = CONF1_DL_BASE << lsz;
-+	sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT);
-+	ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT);
-+	*size = lsz * sets * ways;
-+	*lsize = lsz;
-+}
-+
-+#define cache_op(base, op)			\
-+	__asm__ __volatile__("			\
-+		.set noreorder;			\
-+		.set mips3;			\
-+		cache %1, (%0);			\
-+		.set mips0;			\
-+		.set reorder"			\
-+		:				\
-+		: "r" (base),			\
-+		  "i" (op));
-+
-+#define cache_unroll4(base, delta, op)		\
-+	__asm__ __volatile__("			\
-+		.set noreorder;			\
-+		.set mips3;			\
-+		cache %1, 0(%0);		\
-+		cache %1, delta(%0);		\
-+		cache %1, (2 * delta)(%0);	\
-+		cache %1, (3 * delta)(%0);	\
-+		.set mips0;			\
-+		.set reorder"			\
-+		:				\
-+		: "r" (base),			\
-+		  "i" (op));
-+
-+#endif /* !_LANGUAGE_ASSEMBLY */
-+
-+#endif	/* _MISPINC_H */
-diff -urN linux.old/arch/mips/bcm947xx/include/osl.h linux.dev/arch/mips/bcm947xx/include/osl.h
---- linux.old/arch/mips/bcm947xx/include/osl.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/osl.h	2006-05-02 17:40:43.000000000 +0200
-@@ -0,0 +1,179 @@
-+#ifndef __osl_h
-+#define __osl_h
-+
-+#include <linux/delay.h>
-+#include <typedefs.h>
-+#include <linuxver.h>
-+#include <bcmutils.h>
-+#include <pcicfg.h>
-+
-+#define ASSERT(n)
-+
-+/* Pkttag flag should be part of public information */
-+struct osl_pubinfo {
-+	bool pkttag;
-+	uint pktalloced; /* Number of allocated packet buffers */
-+};
-+
-+struct osl_info {
-+	struct osl_pubinfo pub;
-+	uint magic;
-+	void *pdev;
-+	uint malloced;
-+	uint failed;
-+	void *dbgmem_list;
-+};
-+
-+typedef struct osl_info osl_t;
-+
-+#define PCI_CFG_RETRY                10
-+
-+/* map/unmap direction */
-+#define DMA_TX  1   /* TX direction for DMA */
-+#define DMA_RX  2   /* RX direction for DMA */
-+
-+#define	AND_REG(osh, r, v)		W_REG(osh, (r), R_REG(osh, r) & (v))
-+#define	OR_REG(osh, r, v)		W_REG(osh, (r), R_REG(osh, r) | (v))
-+#define SET_REG(osh, r, mask, val)	W_REG((osh), (r), ((R_REG((osh), r) & ~(mask)) | (val)))
-+
-+/* bcopy, bcmp, and bzero */
-+#define	bcopy(src, dst, len)	memcpy((dst), (src), (len))
-+#define	bcmp(b1, b2, len)	memcmp((b1), (b2), (len))
-+#define	bzero(b, len)		memset((b), '\0', (len))
-+
-+/* uncached virtual address */
-+#ifdef mips
-+#define OSL_UNCACHED(va)	KSEG1ADDR((va))
-+#include <asm/addrspace.h>
-+#else
-+#define OSL_UNCACHED(va)	(va)
-+#endif /* mips */
-+
-+
-+#ifndef IL_BIGENDIAN
-+#define R_REG(osh, r) (\
-+	sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \
-+	sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \
-+	readl((volatile uint32*)(r)) \
-+)
-+#define W_REG(osh, r, v) do { \
-+	switch (sizeof(*(r))) { \
-+	case sizeof(uint8):	writeb((uint8)(v), (volatile uint8*)(r)); break; \
-+	case sizeof(uint16):	writew((uint16)(v), (volatile uint16*)(r)); break; \
-+	case sizeof(uint32):	writel((uint32)(v), (volatile uint32*)(r)); break; \
-+	} \
-+} while (0)
-+#else	/* IL_BIGENDIAN */
-+#define R_REG(osh, r) ({ \
-+	__typeof(*(r)) __osl_v; \
-+	switch (sizeof(*(r))) { \
-+	case sizeof(uint8):	__osl_v = readb((volatile uint8*)((uint32)r^3)); break; \
-+	case sizeof(uint16):	__osl_v = readw((volatile uint16*)((uint32)r^2)); break; \
-+	case sizeof(uint32):	__osl_v = readl((volatile uint32*)(r)); break; \
-+	} \
-+	__osl_v; \
-+})
-+#define W_REG(osh, r, v) do { \
-+	switch (sizeof(*(r))) { \
-+	case sizeof(uint8):	writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \
-+	case sizeof(uint16):	writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \
-+	case sizeof(uint32):	writel((uint32)(v), (volatile uint32*)(r)); break; \
-+	} \
-+} while (0)
-+#endif /* IL_BIGENDIAN */
-+
-+/* dereference an address that may cause a bus exception */
-+#define	BUSPROBE(val, addr)	get_dbe((val), (addr))
-+#include <asm/paccess.h>
-+
-+/* map/unmap physical to virtual I/O */
-+#define	REG_MAP(pa, size)	ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
-+#define	REG_UNMAP(va)		iounmap((void *)(va))
-+
-+/* shared (dma-able) memory access macros */
-+#define	R_SM(r)			*(r)
-+#define	W_SM(r, v)		(*(r) = (v))
-+#define	BZERO_SM(r, len)	memset((r), '\0', (len))
-+
-+#define	MALLOC(osh, size)	kmalloc((size), GFP_ATOMIC)
-+#define	MFREE(osh, addr, size)	kfree((addr))
-+#define MALLOCED(osh)	(0)	
-+
-+#define	osl_delay		OSL_DELAY
-+static inline void OSL_DELAY(uint usec)
-+{
-+	uint d;
-+
-+	while (usec > 0) {
-+		d = MIN(usec, 1000);
-+		udelay(d);
-+		usec -= d;
-+	}
-+}
-+
-+static inline void
-+bcm_mdelay(uint ms)
-+{
-+	uint i;
-+
-+	for (i = 0; i < ms; i++) {
-+		OSL_DELAY(1000);
-+	}
-+}
-+
-+
-+#define	OSL_PCMCIA_READ_ATTR(osh, offset, buf, size)
-+#define	OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size)
-+
-+#define	OSL_PCI_READ_CONFIG(osh, offset, size) \
-+	osl_pci_read_config((osh), (offset), (size))
-+
-+static inline uint32
-+osl_pci_read_config(osl_t *osh, uint offset, uint size)
-+{
-+	uint val;
-+	uint retry = PCI_CFG_RETRY;	 
-+
-+	do {
-+		pci_read_config_dword(osh->pdev, offset, &val);
-+		if (val != 0xffffffff)
-+			break;
-+	} while (retry--);
-+
-+	return (val);
-+}
-+
-+#define	OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \
-+	osl_pci_write_config((osh), (offset), (size), (val))
-+static inline void
-+osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val)
-+{
-+	uint retry = PCI_CFG_RETRY;	 
-+
-+	do {
-+		pci_write_config_dword(osh->pdev, offset, val);
-+		if (offset != PCI_BAR0_WIN)
-+			break;
-+		if (osl_pci_read_config(osh, offset, size) == val)
-+			break;
-+	} while (retry--);
-+}
-+
-+
-+/* return bus # for the pci device pointed by osh->pdev */
-+#define OSL_PCI_BUS(osh)	osl_pci_bus(osh)
-+static inline uint
-+osl_pci_bus(osl_t *osh)
-+{
-+	return ((struct pci_dev *)osh->pdev)->bus->number;
-+}
-+
-+/* return slot # for the pci device pointed by osh->pdev */
-+#define OSL_PCI_SLOT(osh)	osl_pci_slot(osh)
-+static inline uint
-+osl_pci_slot(osl_t *osh)
-+{
-+	return PCI_SLOT(((struct pci_dev *)osh->pdev)->devfn);
-+}
-+
-+#endif
-diff -urN linux.old/arch/mips/bcm947xx/include/pcicfg.h linux.dev/arch/mips/bcm947xx/include/pcicfg.h
---- linux.old/arch/mips/bcm947xx/include/pcicfg.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/pcicfg.h	2006-04-27 20:31:41.000000000 +0200
-@@ -0,0 +1,495 @@
-+/*
-+ * pcicfg.h: PCI configuration constants and structures.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: pcicfg.h,v 1.1.1.11 2006/04/08 06:13:40 honor Exp $
-+ */
-+
-+#ifndef	_h_pcicfg_
-+#define	_h_pcicfg_
-+
-+/* The following inside ifndef's so we don't collide with NTDDK.H */
-+#ifndef PCI_MAX_BUS
-+#define PCI_MAX_BUS		0x100
-+#endif
-+#ifndef PCI_MAX_DEVICES
-+#define PCI_MAX_DEVICES		0x20
-+#endif
-+#ifndef PCI_MAX_FUNCTION
-+#define PCI_MAX_FUNCTION	0x8
-+#endif
-+
-+#ifndef PCI_INVALID_VENDORID
-+#define PCI_INVALID_VENDORID	0xffff
-+#endif
-+#ifndef PCI_INVALID_DEVICEID
-+#define PCI_INVALID_DEVICEID	0xffff
-+#endif
-+
-+
-+/* Convert between bus-slot-function-register and config addresses */
-+
-+#define	PCICFG_BUS_SHIFT	16	/* Bus shift */
-+#define	PCICFG_SLOT_SHIFT	11	/* Slot shift */
-+#define	PCICFG_FUN_SHIFT	8	/* Function shift */
-+#define	PCICFG_OFF_SHIFT	0	/* Register shift */
-+
-+#define	PCICFG_BUS_MASK		0xff	/* Bus mask */
-+#define	PCICFG_SLOT_MASK	0x1f	/* Slot mask */
-+#define	PCICFG_FUN_MASK		7	/* Function mask */
-+#define	PCICFG_OFF_MASK		0xff	/* Bus mask */
-+
-+#define	PCI_CONFIG_ADDR(b, s, f, o)					\
-+		((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT)		\
-+		 | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT)	\
-+		 | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT)	\
-+		 | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT))
-+
-+#define	PCI_CONFIG_BUS(a)	(((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK)
-+#define	PCI_CONFIG_SLOT(a)	(((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK)
-+#define	PCI_CONFIG_FUN(a)	(((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK)
-+#define	PCI_CONFIG_OFF(a)	(((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK)
-+
-+/* PCIE Config space accessing MACROS */
-+
-+#define	PCIECFG_BUS_SHIFT	24	/* Bus shift */
-+#define	PCIECFG_SLOT_SHIFT	19	/* Slot/Device shift */
-+#define	PCIECFG_FUN_SHIFT	16	/* Function shift */
-+#define	PCIECFG_OFF_SHIFT	0	/* Register shift */
-+
-+#define	PCIECFG_BUS_MASK	0xff	/* Bus mask */
-+#define	PCIECFG_SLOT_MASK	0x1f	/* Slot/Device mask */
-+#define	PCIECFG_FUN_MASK	7	/* Function mask */
-+#define	PCIECFG_OFF_MASK	0x3ff	/* Register mask */
-+
-+#define	PCIE_CONFIG_ADDR(b, s, f, o)					\
-+		((((b) & PCIECFG_BUS_MASK) << PCIECFG_BUS_SHIFT)		\
-+		 | (((s) & PCIECFG_SLOT_MASK) << PCIECFG_SLOT_SHIFT)	\
-+		 | (((f) & PCIECFG_FUN_MASK) << PCIECFG_FUN_SHIFT)	\
-+		 | (((o) & PCIECFG_OFF_MASK) << PCIECFG_OFF_SHIFT))
-+
-+#define	PCIE_CONFIG_BUS(a)	(((a) >> PCIECFG_BUS_SHIFT) & PCIECFG_BUS_MASK)
-+#define	PCIE_CONFIG_SLOT(a)	(((a) >> PCIECFG_SLOT_SHIFT) & PCIECFG_SLOT_MASK)
-+#define	PCIE_CONFIG_FUN(a)	(((a) >> PCIECFG_FUN_SHIFT) & PCIECFG_FUN_MASK)
-+#define	PCIE_CONFIG_OFF(a)	(((a) >> PCIECFG_OFF_SHIFT) & PCIECFG_OFF_MASK)
-+
-+/* The actual config space */
-+
-+#define	PCI_BAR_MAX		6
-+
-+#define	PCI_ROM_BAR		8
-+
-+#define	PCR_RSVDA_MAX		2
-+
-+/* Bits in PCI bars' flags */
-+
-+#define	PCIBAR_FLAGS		0xf
-+#define	PCIBAR_IO		0x1
-+#define	PCIBAR_MEM1M		0x2
-+#define	PCIBAR_MEM64		0x4
-+#define	PCIBAR_PREFETCH		0x8
-+#define	PCIBAR_MEM32_MASK	0xFFFFFF80
-+
-+/* pci config status reg has a bit to indicate that capability ptr is present */
-+
-+#define PCI_CAPPTR_PRESENT	0x0010
-+
-+typedef struct _pci_config_regs {
-+	unsigned short	vendor;
-+	unsigned short	device;
-+	unsigned short	command;
-+	unsigned short	status;
-+	unsigned char	rev_id;
-+	unsigned char	prog_if;
-+	unsigned char	sub_class;
-+	unsigned char	base_class;
-+	unsigned char	cache_line_size;
-+	unsigned char	latency_timer;
-+	unsigned char	header_type;
-+	unsigned char	bist;
-+	unsigned long	base[PCI_BAR_MAX];
-+	unsigned long	cardbus_cis;
-+	unsigned short	subsys_vendor;
-+	unsigned short	subsys_id;
-+	unsigned long	baserom;
-+	unsigned long	rsvd_a[PCR_RSVDA_MAX];
-+	unsigned char	int_line;
-+	unsigned char	int_pin;
-+	unsigned char	min_gnt;
-+	unsigned char	max_lat;
-+	unsigned char	dev_dep[192];
-+} pci_config_regs;
-+
-+#define	SZPCR		(sizeof (pci_config_regs))
-+#define	MINSZPCR	64		/* offsetof (dev_dep[0] */
-+
-+/* A structure for the config registers is nice, but in most
-+ * systems the config space is not memory mapped, so we need
-+ * filed offsetts. :-(
-+ */
-+#define	PCI_CFG_VID		0
-+#define	PCI_CFG_DID		2
-+#define	PCI_CFG_CMD		4
-+#define	PCI_CFG_STAT		6
-+#define	PCI_CFG_REV		8
-+#define	PCI_CFG_PROGIF		9
-+#define	PCI_CFG_SUBCL		0xa
-+#define	PCI_CFG_BASECL		0xb
-+#define	PCI_CFG_CLSZ		0xc
-+#define	PCI_CFG_LATTIM		0xd
-+#define	PCI_CFG_HDR		0xe
-+#define	PCI_CFG_BIST		0xf
-+#define	PCI_CFG_BAR0		0x10
-+#define	PCI_CFG_BAR1		0x14
-+#define	PCI_CFG_BAR2		0x18
-+#define	PCI_CFG_BAR3		0x1c
-+#define	PCI_CFG_BAR4		0x20
-+#define	PCI_CFG_BAR5		0x24
-+#define	PCI_CFG_CIS		0x28
-+#define	PCI_CFG_SVID		0x2c
-+#define	PCI_CFG_SSID		0x2e
-+#define	PCI_CFG_ROMBAR		0x30
-+#define PCI_CFG_CAPPTR		0x34
-+#define	PCI_CFG_INT		0x3c
-+#define	PCI_CFG_PIN		0x3d
-+#define	PCI_CFG_MINGNT		0x3e
-+#define	PCI_CFG_MAXLAT		0x3f
-+
-+#ifdef __NetBSD__
-+#undef	PCI_CLASS_DISPLAY
-+#undef	PCI_CLASS_MEMORY
-+#undef	PCI_CLASS_BRIDGE
-+#undef	PCI_CLASS_INPUT
-+#undef	PCI_CLASS_DOCK
-+#endif	/* __NetBSD__ */
-+
-+/* Classes and subclasses */
-+
-+typedef enum {
-+	PCI_CLASS_OLD = 0,
-+	PCI_CLASS_DASDI,
-+	PCI_CLASS_NET,
-+	PCI_CLASS_DISPLAY,
-+	PCI_CLASS_MMEDIA,
-+	PCI_CLASS_MEMORY,
-+	PCI_CLASS_BRIDGE,
-+	PCI_CLASS_COMM,
-+	PCI_CLASS_BASE,
-+	PCI_CLASS_INPUT,
-+	PCI_CLASS_DOCK,
-+	PCI_CLASS_CPU,
-+	PCI_CLASS_SERIAL,
-+	PCI_CLASS_INTELLIGENT = 0xe,
-+	PCI_CLASS_SATELLITE,
-+	PCI_CLASS_CRYPT,
-+	PCI_CLASS_DSP,
-+	PCI_CLASS_XOR = 0xfe
-+} pci_classes;
-+
-+typedef enum {
-+	PCI_DASDI_SCSI,
-+	PCI_DASDI_IDE,
-+	PCI_DASDI_FLOPPY,
-+	PCI_DASDI_IPI,
-+	PCI_DASDI_RAID,
-+	PCI_DASDI_OTHER = 0x80
-+} pci_dasdi_subclasses;
-+
-+typedef enum {
-+	PCI_NET_ETHER,
-+	PCI_NET_TOKEN,
-+	PCI_NET_FDDI,
-+	PCI_NET_ATM,
-+	PCI_NET_OTHER = 0x80
-+} pci_net_subclasses;
-+
-+typedef enum {
-+	PCI_DISPLAY_VGA,
-+	PCI_DISPLAY_XGA,
-+	PCI_DISPLAY_3D,
-+	PCI_DISPLAY_OTHER = 0x80
-+} pci_display_subclasses;
-+
-+typedef enum {
-+	PCI_MMEDIA_VIDEO,
-+	PCI_MMEDIA_AUDIO,
-+	PCI_MMEDIA_PHONE,
-+	PCI_MEDIA_OTHER = 0x80
-+} pci_mmedia_subclasses;
-+
-+typedef enum {
-+	PCI_MEMORY_RAM,
-+	PCI_MEMORY_FLASH,
-+	PCI_MEMORY_OTHER = 0x80
-+} pci_memory_subclasses;
-+
-+typedef enum {
-+	PCI_BRIDGE_HOST,
-+	PCI_BRIDGE_ISA,
-+	PCI_BRIDGE_EISA,
-+	PCI_BRIDGE_MC,
-+	PCI_BRIDGE_PCI,
-+	PCI_BRIDGE_PCMCIA,
-+	PCI_BRIDGE_NUBUS,
-+	PCI_BRIDGE_CARDBUS,
-+	PCI_BRIDGE_RACEWAY,
-+	PCI_BRIDGE_OTHER = 0x80
-+} pci_bridge_subclasses;
-+
-+typedef enum {
-+	PCI_COMM_UART,
-+	PCI_COMM_PARALLEL,
-+	PCI_COMM_MULTIUART,
-+	PCI_COMM_MODEM,
-+	PCI_COMM_OTHER = 0x80
-+} pci_comm_subclasses;
-+
-+typedef enum {
-+	PCI_BASE_PIC,
-+	PCI_BASE_DMA,
-+	PCI_BASE_TIMER,
-+	PCI_BASE_RTC,
-+	PCI_BASE_PCI_HOTPLUG,
-+	PCI_BASE_OTHER = 0x80
-+} pci_base_subclasses;
-+
-+typedef enum {
-+	PCI_INPUT_KBD,
-+	PCI_INPUT_PEN,
-+	PCI_INPUT_MOUSE,
-+	PCI_INPUT_SCANNER,
-+	PCI_INPUT_GAMEPORT,
-+	PCI_INPUT_OTHER = 0x80
-+} pci_input_subclasses;
-+
-+typedef enum {
-+	PCI_DOCK_GENERIC,
-+	PCI_DOCK_OTHER = 0x80
-+} pci_dock_subclasses;
-+
-+typedef enum {
-+	PCI_CPU_386,
-+	PCI_CPU_486,
-+	PCI_CPU_PENTIUM,
-+	PCI_CPU_ALPHA = 0x10,
-+	PCI_CPU_POWERPC = 0x20,
-+	PCI_CPU_MIPS = 0x30,
-+	PCI_CPU_COPROC = 0x40,
-+	PCI_CPU_OTHER = 0x80
-+} pci_cpu_subclasses;
-+
-+typedef enum {
-+	PCI_SERIAL_IEEE1394,
-+	PCI_SERIAL_ACCESS,
-+	PCI_SERIAL_SSA,
-+	PCI_SERIAL_USB,
-+	PCI_SERIAL_FIBER,
-+	PCI_SERIAL_SMBUS,
-+	PCI_SERIAL_OTHER = 0x80
-+} pci_serial_subclasses;
-+
-+typedef enum {
-+	PCI_INTELLIGENT_I2O
-+} pci_intelligent_subclasses;
-+
-+typedef enum {
-+	PCI_SATELLITE_TV,
-+	PCI_SATELLITE_AUDIO,
-+	PCI_SATELLITE_VOICE,
-+	PCI_SATELLITE_DATA,
-+	PCI_SATELLITE_OTHER = 0x80
-+} pci_satellite_subclasses;
-+
-+typedef enum {
-+	PCI_CRYPT_NETWORK,
-+	PCI_CRYPT_ENTERTAINMENT,
-+	PCI_CRYPT_OTHER = 0x80
-+} pci_crypt_subclasses;
-+
-+typedef enum {
-+	PCI_DSP_DPIO,
-+	PCI_DSP_OTHER = 0x80
-+} pci_dsp_subclasses;
-+
-+typedef enum {
-+	PCI_XOR_QDMA,
-+	PCI_XOR_OTHER = 0x80
-+} pci_xor_subclasses;
-+
-+/* Header types */
-+typedef enum {
-+	PCI_HEADER_NORMAL,
-+	PCI_HEADER_BRIDGE,
-+	PCI_HEADER_CARDBUS
-+} pci_header_types;
-+
-+
-+/* Overlay for a PCI-to-PCI bridge */
-+
-+#define	PPB_RSVDA_MAX		2
-+#define	PPB_RSVDD_MAX		8
-+
-+typedef struct _ppb_config_regs {
-+	unsigned short	vendor;
-+	unsigned short	device;
-+	unsigned short	command;
-+	unsigned short	status;
-+	unsigned char	rev_id;
-+	unsigned char	prog_if;
-+	unsigned char	sub_class;
-+	unsigned char	base_class;
-+	unsigned char	cache_line_size;
-+	unsigned char	latency_timer;
-+	unsigned char	header_type;
-+	unsigned char	bist;
-+	unsigned long	rsvd_a[PPB_RSVDA_MAX];
-+	unsigned char	prim_bus;
-+	unsigned char	sec_bus;
-+	unsigned char	sub_bus;
-+	unsigned char	sec_lat;
-+	unsigned char	io_base;
-+	unsigned char	io_lim;
-+	unsigned short	sec_status;
-+	unsigned short	mem_base;
-+	unsigned short	mem_lim;
-+	unsigned short	pf_mem_base;
-+	unsigned short	pf_mem_lim;
-+	unsigned long	pf_mem_base_hi;
-+	unsigned long	pf_mem_lim_hi;
-+	unsigned short	io_base_hi;
-+	unsigned short	io_lim_hi;
-+	unsigned short	subsys_vendor;
-+	unsigned short	subsys_id;
-+	unsigned long	rsvd_b;
-+	unsigned char	rsvd_c;
-+	unsigned char	int_pin;
-+	unsigned short	bridge_ctrl;
-+	unsigned char	chip_ctrl;
-+	unsigned char	diag_ctrl;
-+	unsigned short	arb_ctrl;
-+	unsigned long	rsvd_d[PPB_RSVDD_MAX];
-+	unsigned char	dev_dep[192];
-+} ppb_config_regs;
-+
-+
-+/* PCI CAPABILITY DEFINES */
-+#define PCI_CAP_POWERMGMTCAP_ID		0x01
-+#define PCI_CAP_MSICAP_ID		0x05
-+#define PCI_CAP_PCIECAP_ID		0x10
-+
-+/* Data structure to define the Message Signalled Interrupt facility 
-+ * Valid for PCI and PCIE configurations
-+ */
-+typedef struct _pciconfig_cap_msi {
-+	unsigned char capID;
-+	unsigned char nextptr;
-+	unsigned short msgctrl;
-+	unsigned int msgaddr;
-+} pciconfig_cap_msi;
-+
-+/* Data structure to define the Power managment facility
-+ * Valid for PCI and PCIE configurations
-+ */
-+typedef struct _pciconfig_cap_pwrmgmt {
-+	unsigned char capID;
-+	unsigned char nextptr;
-+	unsigned short pme_cap;
-+	unsigned short pme_sts_ctrl;
-+	unsigned char pme_bridge_ext;
-+	unsigned char data;
-+} pciconfig_cap_pwrmgmt;
-+
-+/* Data structure to define the PCIE capability */
-+typedef struct _pciconfig_cap_pcie {
-+	unsigned char capID;
-+	unsigned char nextptr;
-+	unsigned short pcie_cap;
-+	unsigned int dev_cap;
-+	unsigned short dev_ctrl;
-+	unsigned short dev_status;
-+	unsigned int link_cap;
-+	unsigned short link_ctrl;
-+	unsigned short link_status;
-+} pciconfig_cap_pcie;
-+
-+/* PCIE Enhanced CAPABILITY DEFINES */
-+#define PCIE_EXTCFG_OFFSET	0x100
-+#define PCIE_ADVERRREP_CAPID	0x0001
-+#define PCIE_VC_CAPID		0x0002
-+#define PCIE_DEVSNUM_CAPID	0x0003
-+#define PCIE_PWRBUDGET_CAPID	0x0004
-+
-+/* Header to define the PCIE specific capabilities in the extended config space */
-+typedef struct _pcie_enhanced_caphdr {
-+	unsigned short capID;
-+	unsigned short cap_ver : 4;
-+	unsigned short next_ptr : 12;
-+} pcie_enhanced_caphdr;
-+
-+
-+/* Everything below is BRCM HND proprietary */
-+
-+
-+/* Brcm PCI configuration registers */
-+#define cap_list	rsvd_a[0]
-+#define bar0_window	dev_dep[0x80 - 0x40]
-+#define bar1_window	dev_dep[0x84 - 0x40]
-+#define sprom_control	dev_dep[0x88 - 0x40]
-+
-+#define	PCI_BAR0_WIN		0x80	/* backplane addres space accessed by BAR0 */
-+#define	PCI_BAR1_WIN		0x84	/* backplane addres space accessed by BAR1 */
-+#define	PCI_SPROM_CONTROL	0x88	/* sprom property control */
-+#define	PCI_BAR1_CONTROL	0x8c	/* BAR1 region burst control */
-+#define	PCI_INT_STATUS		0x90	/* PCI and other cores interrupts */
-+#define	PCI_INT_MASK		0x94	/* mask of PCI and other cores interrupts */
-+#define PCI_TO_SB_MB		0x98	/* signal backplane interrupts */
-+#define PCI_BACKPLANE_ADDR	0xA0	/* address an arbitrary location on the system backplane */
-+#define PCI_BACKPLANE_DATA	0xA4	/* data at the location specified by above address */
-+#define	PCI_GPIO_IN		0xb0	/* pci config space gpio input (>=rev3) */
-+#define	PCI_GPIO_OUT		0xb4	/* pci config space gpio output (>=rev3) */
-+#define	PCI_GPIO_OUTEN		0xb8	/* pci config space gpio output enable (>=rev3) */
-+
-+#define	PCI_BAR0_SHADOW_OFFSET	(2 * 1024)	/* bar0 + 2K accesses sprom shadow (in pci core) */
-+#define	PCI_BAR0_SPROM_OFFSET	(4 * 1024)	/* bar0 + 4K accesses external sprom */
-+#define	PCI_BAR0_PCIREGS_OFFSET	(6 * 1024)	/* bar0 + 6K accesses pci core registers */
-+#define	PCI_BAR0_PCISBR_OFFSET	(4 * 1024)	/* pci core SB registers are at the end of the
-+						 * 8KB window, so their address is the "regular"
-+						 * address plus 4K
-+						 */
-+#define PCI_BAR0_WINSZ		8192		/* bar0 window size */
-+
-+/* On pci corerev >= 13 and all pcie, the bar0 is now 16KB and it maps: */
-+#define	PCI_16KB0_PCIREGS_OFFSET (8 * 1024)	/* bar0 + 8K accesses pci/pcie core registers */
-+#define	PCI_16KB0_CCREGS_OFFSET	(12 * 1024)	/* bar0 + 12K accesses chipc core registers */
-+#define PCI_16KBB0_WINSZ	(16 * 1024)	/* bar0 window size */
-+
-+/* PCI_INT_STATUS */
-+#define	PCI_SBIM_STATUS_SERR	0x4	/* backplane SBErr interrupt status */
-+
-+/* PCI_INT_MASK */
-+#define	PCI_SBIM_SHIFT		8	/* backplane core interrupt mask bits offset */
-+#define	PCI_SBIM_MASK		0xff00	/* backplane core interrupt mask */
-+#define	PCI_SBIM_MASK_SERR	0x4	/* backplane SBErr interrupt mask */
-+
-+/* PCI_SPROM_CONTROL */
-+#define SPROM_SZ_MSK		0x02	/* SPROM Size Mask */
-+#define SPROM_LOCKED		0x08	/* SPROM Locked */
-+#define	SPROM_BLANK		0x04	/* indicating a blank SPROM */
-+#define SPROM_WRITEEN		0x10	/* SPROM write enable */
-+#define SPROM_BOOTROM_WE	0x20	/* external bootrom write enable */
-+#define SPROM_OTPIN_USE		0x80	/* device OTP In use */
-+
-+#define	SPROM_SIZE		256	/* sprom size in 16-bit */
-+#define SPROM_CRC_RANGE		64	/* crc cover range in 16-bit */
-+
-+/* PCI_CFG_CMD_STAT */
-+#define PCI_CFG_CMD_STAT_TA	0x08000000	/* target abort status */
-+
-+#endif	/* _h_pcicfg_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/sbchipc.h linux.dev/arch/mips/bcm947xx/include/sbchipc.h
---- linux.old/arch/mips/bcm947xx/include/sbchipc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbchipc.h	2006-04-27 22:11:01.000000000 +0200
-@@ -0,0 +1,516 @@
-+/*
-+ * SiliconBackplane Chipcommon core hardware definitions.
-+ *
-+ * The chipcommon core provides chip identification, SB control,
-+ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
-+ * gpio interface, extbus, and support for serial and parallel flashes.
-+ *
-+ * $Id: sbchipc.h,v 1.1.1.14 2006/04/15 01:29:08 michael Exp $
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ */
-+
-+#ifndef	_SBCHIPC_H
-+#define	_SBCHIPC_H
-+
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif	/* PAD */
-+
-+typedef volatile struct {
-+	uint32	chipid;			/* 0x0 */
-+	uint32	capabilities;
-+	uint32	corecontrol;		/* corerev >= 1 */
-+	uint32	bist;
-+
-+	/* OTP */
-+	uint32	otpstatus;		/* 0x10, corerev >= 10 */
-+	uint32	otpcontrol;
-+	uint32	otpprog;
-+	uint32	PAD;
-+
-+	/* Interrupt control */
-+	uint32	intstatus;		/* 0x20 */
-+	uint32	intmask;
-+	uint32	chipcontrol;		/* 0x28, rev >= 11 */
-+	uint32	chipstatus;		/* 0x2c, rev >= 11 */
-+
-+	/* Jtag Master */
-+	uint32	jtagcmd;		/* 0x30, rev >= 10 */
-+	uint32	jtagir;
-+	uint32	jtagdr;
-+	uint32	jtagctrl;
-+
-+	/* serial flash interface registers */
-+	uint32	flashcontrol;		/* 0x40 */
-+	uint32	flashaddress;
-+	uint32	flashdata;
-+	uint32	PAD[1];
-+
-+	/* Silicon backplane configuration broadcast control */
-+	uint32	broadcastaddress;	/* 0x50 */
-+	uint32	broadcastdata;
-+	uint32	PAD[2];
-+
-+	/* gpio - cleared only by power-on-reset */
-+	uint32	gpioin;			/* 0x60 */
-+	uint32	gpioout;
-+	uint32	gpioouten;
-+	uint32	gpiocontrol;
-+	uint32	gpiointpolarity;
-+	uint32	gpiointmask;
-+	uint32	PAD[2];
-+
-+	/* Watchdog timer */
-+	uint32	watchdog;		/* 0x80 */
-+	uint32	PAD[1];
-+
-+	/* GPIO based LED powersave registers corerev >= 16 */
-+	uint32  gpiotimerval;		/* 0x88 */
-+	uint32  gpiotimeroutmask;
-+
-+	/* clock control */
-+	uint32	clockcontrol_n;		/* 0x90 */
-+	uint32	clockcontrol_sb;	/* aka m0 */
-+	uint32	clockcontrol_pci;	/* aka m1 */
-+	uint32	clockcontrol_m2;	/* mii/uart/mipsref */
-+	uint32	clockcontrol_m3;	/* cpu */
-+	uint32	clkdiv;			/* corerev >= 3 */
-+	uint32	PAD[2];
-+
-+	/* pll delay registers (corerev >= 4) */
-+	uint32	pll_on_delay;		/* 0xb0 */
-+	uint32	fref_sel_delay;
-+	uint32	slow_clk_ctl;		/* 5 < corerev < 10 */
-+	uint32	PAD[1];
-+
-+	/* Instaclock registers (corerev >= 10) */
-+	uint32	system_clk_ctl;		/* 0xc0 */
-+	uint32	clkstatestretch;
-+	uint32	PAD[14];
-+
-+	/* ExtBus control registers (corerev >= 3) */
-+	uint32	pcmcia_config;		/* 0x100 */
-+	uint32	pcmcia_memwait;
-+	uint32	pcmcia_attrwait;
-+	uint32	pcmcia_iowait;
-+	uint32	ide_config;
-+	uint32	ide_memwait;
-+	uint32	ide_attrwait;
-+	uint32	ide_iowait;
-+	uint32	prog_config;
-+	uint32	prog_waitcount;
-+	uint32	flash_config;
-+	uint32	flash_waitcount;
-+	uint32	PAD[44];
-+
-+	/* Clock control and hardware workarounds */
-+	uint32	clk_ctl_st;
-+	uint32	hw_war;
-+	uint32	PAD[70];
-+
-+	/* uarts */
-+	uint8	uart0data;		/* 0x300 */
-+	uint8	uart0imr;
-+	uint8	uart0fcr;
-+	uint8	uart0lcr;
-+	uint8	uart0mcr;
-+	uint8	uart0lsr;
-+	uint8	uart0msr;
-+	uint8	uart0scratch;
-+	uint8	PAD[248];		/* corerev >= 1 */
-+
-+	uint8	uart1data;		/* 0x400 */
-+	uint8	uart1imr;
-+	uint8	uart1fcr;
-+	uint8	uart1lcr;
-+	uint8	uart1mcr;
-+	uint8	uart1lsr;
-+	uint8	uart1msr;
-+	uint8	uart1scratch;
-+} chipcregs_t;
-+
-+#endif /* _LANGUAGE_ASSEMBLY */
-+
-+#define	CC_CHIPID		0
-+#define	CC_CAPABILITIES		4
-+#define	CC_JTAGCMD		0x30
-+#define	CC_JTAGIR		0x34
-+#define	CC_JTAGDR		0x38
-+#define	CC_JTAGCTRL		0x3c
-+#define	CC_WATCHDOG		0x80
-+#define	CC_CLKC_N		0x90
-+#define	CC_CLKC_M0		0x94
-+#define	CC_CLKC_M1		0x98
-+#define	CC_CLKC_M2		0x9c
-+#define	CC_CLKC_M3		0xa0
-+#define	CC_CLKDIV		0xa4
-+#define	CC_SYS_CLK_CTL		0xc0
-+#define	CC_OTP			0x800
-+
-+/* chipid */
-+#define	CID_ID_MASK		0x0000ffff	/* Chip Id mask */
-+#define	CID_REV_MASK		0x000f0000	/* Chip Revision mask */
-+#define	CID_REV_SHIFT		16		/* Chip Revision shift */
-+#define	CID_PKG_MASK		0x00f00000	/* Package Option mask */
-+#define	CID_PKG_SHIFT		20		/* Package Option shift */
-+#define	CID_CC_MASK		0x0f000000	/* CoreCount (corerev >= 4) */
-+#define CID_CC_SHIFT		24
-+
-+/* capabilities */
-+#define	CAP_UARTS_MASK		0x00000003	/* Number of uarts */
-+#define CAP_MIPSEB		0x00000004	/* MIPS is in big-endian mode */
-+#define CAP_UCLKSEL		0x00000018	/* UARTs clock select */
-+#define CAP_UINTCLK		0x00000008	/* UARTs are driven by internal divided clock */
-+#define CAP_UARTGPIO		0x00000020	/* UARTs own Gpio's 15:12 */
-+#define CAP_EXTBUS_MASK		0x000000c0	/* External bus mask */
-+#define CAP_EXTBUS_NONE		0x00000000	/* No ExtBus present */
-+#define CAP_EXTBUS_FULL		0x00000040	/* ExtBus: PCMCIA, IDE & Prog */
-+#define CAP_EXTBUS_PROG		0x00000080	/* ExtBus: ProgIf only */
-+#define	CAP_FLASH_MASK		0x00000700	/* Type of flash */
-+#define	CAP_PLL_MASK		0x00038000	/* Type of PLL */
-+#define CAP_PWR_CTL		0x00040000	/* Power control */
-+#define CAP_OTPSIZE		0x00380000	/* OTP Size (0 = none) */
-+#define CAP_OTPSIZE_SHIFT	19		/* OTP Size shift */
-+#define CAP_OTPSIZE_BASE	5		/* OTP Size base */
-+#define CAP_JTAGP		0x00400000	/* JTAG Master Present */
-+#define CAP_ROM			0x00800000	/* Internal boot rom active */
-+#define CAP_BKPLN64		0x08000000	/* 64-bit backplane */
-+
-+/* PLL type */
-+#define PLL_NONE		0x00000000
-+#define PLL_TYPE1		0x00010000	/* 48Mhz base, 3 dividers */
-+#define PLL_TYPE2		0x00020000	/* 48Mhz, 4 dividers */
-+#define PLL_TYPE3		0x00030000	/* 25Mhz, 2 dividers */
-+#define PLL_TYPE4		0x00008000	/* 48Mhz, 4 dividers */
-+#define PLL_TYPE5		0x00018000	/* 25Mhz, 4 dividers */
-+#define PLL_TYPE6		0x00028000	/* 100/200 or 120/240 only */
-+#define PLL_TYPE7		0x00038000	/* 25Mhz, 4 dividers */
-+
-+/* corecontrol */
-+#define CC_UARTCLKO		0x00000001	/* Drive UART with internal clock */
-+#define	CC_SE			0x00000002	/* sync clk out enable (corerev >= 3) */
-+
-+/* chipcontrol */
-+#define CHIPCTRL_4321A0_DEFAULT	0x3a4		
-+#define CHIPCTRL_4321A1_DEFAULT	0x0a4		
-+
-+/* Fields in the otpstatus register */
-+#define	OTPS_PROGFAIL		0x80000000
-+#define	OTPS_PROTECT		0x00000007
-+#define	OTPS_HW_PROTECT		0x00000001
-+#define	OTPS_SW_PROTECT		0x00000002
-+#define	OTPS_CID_PROTECT	0x00000004
-+
-+/* Fields in the otpcontrol register */
-+#define	OTPC_RECWAIT		0xff000000
-+#define	OTPC_PROGWAIT		0x00ffff00
-+#define	OTPC_PRW_SHIFT		8
-+#define	OTPC_MAXFAIL		0x00000038
-+#define	OTPC_VSEL		0x00000006
-+#define	OTPC_SELVL		0x00000001
-+
-+/* Fields in otpprog */
-+#define	OTPP_COL_MASK		0x000000ff
-+#define	OTPP_ROW_MASK		0x0000ff00
-+#define	OTPP_ROW_SHIFT		8
-+#define	OTPP_READERR		0x10000000
-+#define	OTPP_VALUE		0x20000000
-+#define	OTPP_VALUE_SHIFT		29
-+#define	OTPP_READ		0x40000000
-+#define	OTPP_START		0x80000000
-+#define	OTPP_BUSY		0x80000000
-+
-+/* jtagcmd */
-+#define JCMD_START		0x80000000
-+#define JCMD_BUSY		0x80000000
-+#define JCMD_PAUSE		0x40000000
-+#define JCMD0_ACC_MASK		0x0000f000
-+#define JCMD0_ACC_IRDR		0x00000000
-+#define JCMD0_ACC_DR		0x00001000
-+#define JCMD0_ACC_IR		0x00002000
-+#define JCMD0_ACC_RESET		0x00003000
-+#define JCMD0_ACC_IRPDR		0x00004000
-+#define JCMD0_ACC_PDR		0x00005000
-+#define JCMD0_IRW_MASK		0x00000f00
-+#define JCMD_ACC_MASK		0x000f0000	/* Changes for corerev 11 */
-+#define JCMD_ACC_IRDR		0x00000000
-+#define JCMD_ACC_DR		0x00010000
-+#define JCMD_ACC_IR		0x00020000
-+#define JCMD_ACC_RESET		0x00030000
-+#define JCMD_ACC_IRPDR		0x00040000
-+#define JCMD_ACC_PDR		0x00050000
-+#define JCMD_IRW_MASK		0x00001f00
-+#define JCMD_IRW_SHIFT		8
-+#define JCMD_DRW_MASK		0x0000003f
-+
-+/* jtagctrl */
-+#define JCTRL_FORCE_CLK		4		/* Force clock */
-+#define JCTRL_EXT_EN		2		/* Enable external targets */
-+#define JCTRL_EN		1		/* Enable Jtag master */
-+
-+/* Fields in clkdiv */
-+#define	CLKD_SFLASH		0x0f000000
-+#define	CLKD_SFLASH_SHIFT	24
-+#define	CLKD_OTP		0x000f0000
-+#define	CLKD_OTP_SHIFT		16
-+#define	CLKD_JTAG		0x00000f00
-+#define	CLKD_JTAG_SHIFT		8
-+#define	CLKD_UART		0x000000ff
-+
-+/* intstatus/intmask */
-+#define	CI_GPIO			0x00000001	/* gpio intr */
-+#define	CI_EI			0x00000002	/* ro: ext intr pin (corerev >= 3) */
-+#define	CI_WDRESET		0x80000000	/* watchdog reset occurred */
-+
-+/* slow_clk_ctl */
-+#define SCC_SS_MASK		0x00000007	/* slow clock source mask */
-+#define	SCC_SS_LPO		0x00000000	/* source of slow clock is LPO */
-+#define	SCC_SS_XTAL		0x00000001	/* source of slow clock is crystal */
-+#define	SCC_SS_PCI		0x00000002	/* source of slow clock is PCI */
-+#define SCC_LF			0x00000200	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
-+#define SCC_LP			0x00000400	/* LPOPowerDown, 1: LPO is disabled,
-+						 * 0: LPO is enabled
-+						 */
-+#define SCC_FS			0x00000800	/* ForceSlowClk, 1: sb/cores running on slow clock,
-+						 * 0: power logic control
-+						 */
-+#define SCC_IP			0x00001000	/* IgnorePllOffReq, 1/0: power logic ignores/honors
-+						 * PLL clock disable requests from core
-+						 */
-+#define SCC_XC			0x00002000	/* XtalControlEn, 1/0: power logic does/doesn't
-+						 * disable crystal when appropriate
-+						 */
-+#define SCC_XP			0x00004000	/* XtalPU (RO), 1/0: crystal running/disabled */
-+#define SCC_CD_MASK		0xffff0000	/* ClockDivider (SlowClk = 1/(4+divisor)) */
-+#define SCC_CD_SHIFT		16
-+
-+/* system_clk_ctl */
-+#define	SYCC_IE			0x00000001	/* ILPen: Enable Idle Low Power */
-+#define	SYCC_AE			0x00000002	/* ALPen: Enable Active Low Power */
-+#define	SYCC_FP			0x00000004	/* ForcePLLOn */
-+#define	SYCC_AR			0x00000008	/* Force ALP (or HT if ALPen is not set */
-+#define	SYCC_HR			0x00000010	/* Force HT */
-+#define SYCC_CD_MASK		0xffff0000	/* ClkDiv  (ILP = 1/(4 * (divisor + 1)) */
-+#define SYCC_CD_SHIFT		16
-+
-+/* gpiotimerval */
-+#define GPIO_ONTIME_SHIFT	16
-+
-+/* clockcontrol_n */
-+#define	CN_N1_MASK		0x3f		/* n1 control */
-+#define	CN_N2_MASK		0x3f00		/* n2 control */
-+#define	CN_N2_SHIFT		8
-+#define	CN_PLLC_MASK		0xf0000		/* pll control */
-+#define	CN_PLLC_SHIFT		16
-+
-+/* clockcontrol_sb/pci/uart */
-+#define	CC_M1_MASK		0x3f		/* m1 control */
-+#define	CC_M2_MASK		0x3f00		/* m2 control */
-+#define	CC_M2_SHIFT		8
-+#define	CC_M3_MASK		0x3f0000	/* m3 control */
-+#define	CC_M3_SHIFT		16
-+#define	CC_MC_MASK		0x1f000000	/* mux control */
-+#define	CC_MC_SHIFT		24
-+
-+/* N3M Clock control magic field values */
-+#define	CC_F6_2			0x02		/* A factor of 2 in */
-+#define	CC_F6_3			0x03		/* 6-bit fields like */
-+#define	CC_F6_4			0x05		/* N1, M1 or M3 */
-+#define	CC_F6_5			0x09
-+#define	CC_F6_6			0x11
-+#define	CC_F6_7			0x21
-+
-+#define	CC_F5_BIAS		5		/* 5-bit fields get this added */
-+
-+#define	CC_MC_BYPASS		0x08
-+#define	CC_MC_M1		0x04
-+#define	CC_MC_M1M2		0x02
-+#define	CC_MC_M1M2M3		0x01
-+#define	CC_MC_M1M3		0x11
-+
-+/* Type 2 Clock control magic field values */
-+#define	CC_T2_BIAS		2		/* n1, n2, m1 & m3 bias */
-+#define	CC_T2M2_BIAS		3		/* m2 bias */
-+
-+#define	CC_T2MC_M1BYP		1
-+#define	CC_T2MC_M2BYP		2
-+#define	CC_T2MC_M3BYP		4
-+
-+/* Type 6 Clock control magic field values */
-+#define	CC_T6_MMASK		1		/* bits of interest in m */
-+#define	CC_T6_M0		120000000	/* sb clock for m = 0 */
-+#define	CC_T6_M1		100000000	/* sb clock for m = 1 */
-+#define	SB2MIPS_T6(sb)		(2 * (sb))
-+
-+/* Common clock base */
-+#define	CC_CLOCK_BASE1		24000000	/* Half the clock freq */
-+#define CC_CLOCK_BASE2		12500000	/* Alternate crystal on some PLL's */
-+
-+/* Clock control values for 200Mhz in 5350 */
-+#define	CLKC_5350_N		0x0311
-+#define	CLKC_5350_M		0x04020009
-+
-+/* Flash types in the chipcommon capabilities register */
-+#define FLASH_NONE		0x000		/* No flash */
-+#define SFLASH_ST		0x100		/* ST serial flash */
-+#define SFLASH_AT		0x200		/* Atmel serial flash */
-+#define	PFLASH			0x700		/* Parallel flash */
-+
-+/* Bits in the ExtBus config registers */
-+#define	CC_CFG_EN		0x0001		/* Enable */
-+#define	CC_CFG_EM_MASK		0x000e		/* Extif Mode */
-+#define	CC_CFG_EM_ASYNC		0x0000		/*   Async/Parallel flash */
-+#define	CC_CFG_EM_SYNC		0x0002		/*   Synchronous */
-+#define	CC_CFG_EM_PCMCIA	0x0004		/*   PCMCIA */
-+#define	CC_CFG_EM_IDE		0x0006		/*   IDE */
-+#define	CC_CFG_DS		0x0010		/* Data size, 0=8bit, 1=16bit */
-+#define	CC_CFG_CD_MASK		0x0060		/* Sync: Clock divisor */
-+#define	CC_CFG_CE		0x0080		/* Sync: Clock enable */
-+#define	CC_CFG_SB		0x0100		/* Sync: Size/Bytestrobe */
-+
-+/* ExtBus address space */
-+#define	CC_EB_BASE		0x1a000000	/* Chipc ExtBus base address */
-+#define	CC_EB_PCMCIA_MEM	0x1a000000	/* PCMCIA 0 memory base address */
-+#define	CC_EB_PCMCIA_IO		0x1a200000	/* PCMCIA 0 I/O base address */
-+#define	CC_EB_PCMCIA_CFG	0x1a400000	/* PCMCIA 0 config base address */
-+#define	CC_EB_IDE		0x1a800000	/* IDE memory base */
-+#define	CC_EB_PCMCIA1_MEM	0x1a800000	/* PCMCIA 1 memory base address */
-+#define	CC_EB_PCMCIA1_IO	0x1aa00000	/* PCMCIA 1 I/O base address */
-+#define	CC_EB_PCMCIA1_CFG	0x1ac00000	/* PCMCIA 1 config base address */
-+#define	CC_EB_PROGIF		0x1b000000	/* ProgIF Async/Sync base address */
-+
-+
-+/* Start/busy bit in flashcontrol */
-+#define SFLASH_OPCODE		0x000000ff
-+#define SFLASH_ACTION		0x00000700
-+#define SFLASH_START		0x80000000
-+#define SFLASH_BUSY		SFLASH_START
-+
-+/* flashcontrol action codes */
-+#define	SFLASH_ACT_OPONLY	0x0000		/* Issue opcode only */
-+#define	SFLASH_ACT_OP1D		0x0100		/* opcode + 1 data byte */
-+#define	SFLASH_ACT_OP3A		0x0200		/* opcode + 3 address bytes */
-+#define	SFLASH_ACT_OP3A1D	0x0300		/* opcode + 3 addres & 1 data bytes */
-+#define	SFLASH_ACT_OP3A4D	0x0400		/* opcode + 3 addres & 4 data bytes */
-+#define	SFLASH_ACT_OP3A4X4D	0x0500		/* opcode + 3 addres, 4 don't care & 4 data bytes */
-+#define	SFLASH_ACT_OP3A1X4D	0x0700		/* opcode + 3 addres, 1 don't care & 4 data bytes */
-+
-+/* flashcontrol action+opcodes for ST flashes */
-+#define SFLASH_ST_WREN		0x0006		/* Write Enable */
-+#define SFLASH_ST_WRDIS		0x0004		/* Write Disable */
-+#define SFLASH_ST_RDSR		0x0105		/* Read Status Register */
-+#define SFLASH_ST_WRSR		0x0101		/* Write Status Register */
-+#define SFLASH_ST_READ		0x0303		/* Read Data Bytes */
-+#define SFLASH_ST_PP		0x0302		/* Page Program */
-+#define SFLASH_ST_SE		0x02d8		/* Sector Erase */
-+#define SFLASH_ST_BE		0x00c7		/* Bulk Erase */
-+#define SFLASH_ST_DP		0x00b9		/* Deep Power-down */
-+#define SFLASH_ST_RES		0x03ab		/* Read Electronic Signature */
-+
-+/* Status register bits for ST flashes */
-+#define SFLASH_ST_WIP		0x01		/* Write In Progress */
-+#define SFLASH_ST_WEL		0x02		/* Write Enable Latch */
-+#define SFLASH_ST_BP_MASK	0x1c		/* Block Protect */
-+#define SFLASH_ST_BP_SHIFT	2
-+#define SFLASH_ST_SRWD		0x80		/* Status Register Write Disable */
-+
-+/* flashcontrol action+opcodes for Atmel flashes */
-+#define SFLASH_AT_READ				0x07e8
-+#define SFLASH_AT_PAGE_READ			0x07d2
-+#define SFLASH_AT_BUF1_READ
-+#define SFLASH_AT_BUF2_READ
-+#define SFLASH_AT_STATUS			0x01d7
-+#define SFLASH_AT_BUF1_WRITE			0x0384
-+#define SFLASH_AT_BUF2_WRITE			0x0387
-+#define SFLASH_AT_BUF1_ERASE_PROGRAM		0x0283
-+#define SFLASH_AT_BUF2_ERASE_PROGRAM		0x0286
-+#define SFLASH_AT_BUF1_PROGRAM			0x0288
-+#define SFLASH_AT_BUF2_PROGRAM			0x0289
-+#define SFLASH_AT_PAGE_ERASE			0x0281
-+#define SFLASH_AT_BLOCK_ERASE			0x0250
-+#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM	0x0382
-+#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM	0x0385
-+#define SFLASH_AT_BUF1_LOAD			0x0253
-+#define SFLASH_AT_BUF2_LOAD			0x0255
-+#define SFLASH_AT_BUF1_COMPARE			0x0260
-+#define SFLASH_AT_BUF2_COMPARE			0x0261
-+#define SFLASH_AT_BUF1_REPROGRAM		0x0258
-+#define SFLASH_AT_BUF2_REPROGRAM		0x0259
-+
-+/* Status register bits for Atmel flashes */
-+#define SFLASH_AT_READY				0x80
-+#define SFLASH_AT_MISMATCH			0x40
-+#define SFLASH_AT_ID_MASK			0x38
-+#define SFLASH_AT_ID_SHIFT			3
-+
-+/* OTP regions */
-+#define	OTP_HW_REGION	OTPS_HW_PROTECT
-+#define	OTP_SW_REGION	OTPS_SW_PROTECT
-+#define	OTP_CID_REGION	OTPS_CID_PROTECT
-+
-+/* OTP regions (Byte offsets from otp size) */
-+#define	OTP_SWLIM_OFF	(-8)
-+#define	OTP_CIDBASE_OFF	0
-+#define	OTP_CIDLIM_OFF	8
-+
-+/* Predefined OTP words (Word offset from otp size) */
-+#define	OTP_BOUNDARY_OFF (-4)
-+#define	OTP_HWSIGN_OFF	(-3)
-+#define	OTP_SWSIGN_OFF	(-2)
-+#define	OTP_CIDSIGN_OFF	(-1)
-+
-+#define	OTP_CID_OFF	0
-+#define	OTP_PKG_OFF	1
-+#define	OTP_FID_OFF	2
-+#define	OTP_RSV_OFF	3
-+#define	OTP_LIM_OFF	4
-+
-+#define	OTP_SIGNATURE	0x578a
-+#define	OTP_MAGIC	0x4e56
-+
-+/* 
-+ * These are the UART port assignments, expressed as offsets from the base
-+ * register.  These assignments should hold for any serial port based on
-+ * a 8250, 16450, or 16550(A).
-+ */
-+
-+#define UART_RX		0	/* In:  Receive buffer (DLAB=0) */
-+#define UART_TX		0	/* Out: Transmit buffer (DLAB=0) */
-+#define UART_DLL	0	/* Out: Divisor Latch Low (DLAB=1) */
-+#define UART_IER	1	/* In/Out: Interrupt Enable Register (DLAB=0) */
-+#define UART_DLM	1	/* Out: Divisor Latch High (DLAB=1) */
-+#define UART_IIR	2	/* In: Interrupt Identity Register  */
-+#define UART_FCR	2	/* Out: FIFO Control Register */
-+#define UART_LCR	3	/* Out: Line Control Register */
-+#define UART_MCR	4	/* Out: Modem Control Register */
-+#define UART_LSR	5	/* In:  Line Status Register */
-+#define UART_MSR	6	/* In:  Modem Status Register */
-+#define UART_SCR	7	/* I/O: Scratch Register */
-+#define UART_LCR_DLAB	0x80	/* Divisor latch access bit */
-+#define UART_LCR_WLEN8	0x03	/* Wordlength: 8 bits */
-+#define UART_MCR_OUT2	0x08	/* MCR GPIO out 2 */
-+#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
-+#define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
-+#define UART_LSR_RXRDY	0x01	/* Receiver ready */
-+#define UART_FCR_FIFO_ENABLE 1	/* FIFO control register bit controlling FIFO enable/disable */
-+
-+/* Interrupt Enable Register (IER) bits */
-+#define UART_IER_EDSSI	8	/* enable modem status interrupt */
-+#define UART_IER_ELSI	4	/* enable receiver line status interrupt */
-+#define UART_IER_ETBEI  2	/* enable transmitter holding register empty interrupt */
-+#define UART_IER_ERBFI	1	/* enable data available interrupt */
-+
-+#endif	/* _SBCHIPC_H */
-diff -urN linux.old/arch/mips/bcm947xx/include/sbconfig.h linux.dev/arch/mips/bcm947xx/include/sbconfig.h
---- linux.old/arch/mips/bcm947xx/include/sbconfig.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbconfig.h	2006-04-27 22:14:11.000000000 +0200
-@@ -0,0 +1,369 @@
-+/*
-+ * Broadcom SiliconBackplane hardware register definitions.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbconfig.h,v 1.1.1.11 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef	_SBCONFIG_H
-+#define	_SBCONFIG_H
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif
-+
-+/*
-+ * SiliconBackplane Address Map.
-+ * All regions may not exist on all chips.
-+ */
-+#define SB_SDRAM_BASE		0x00000000	/* Physical SDRAM */
-+#define SB_PCI_MEM		0x08000000	/* Host Mode sb2pcitranslation0 (64 MB) */
-+#define SB_PCI_MEM_SZ		(64 * 1024 * 1024)
-+#define SB_PCI_CFG		0x0c000000	/* Host Mode sb2pcitranslation1 (64 MB) */
-+#define	SB_SDRAM_SWAPPED	0x10000000	/* Byteswapped Physical SDRAM */
-+#define SB_ENUM_BASE    	0x18000000	/* Enumeration space base */
-+#define	SB_ENUM_LIM		0x18010000	/* Enumeration space limit */
-+
-+#define	SB_FLASH2		0x1c000000	/* Flash Region 2 (region 1 shadowed here) */
-+#define	SB_FLASH2_SZ		0x02000000	/* Size of Flash Region 2 */
-+
-+#define	SB_EXTIF_BASE		0x1f000000	/* External Interface region base address */
-+#define	SB_FLASH1		0x1fc00000	/* MIPS Flash Region 1 */
-+#define	SB_FLASH1_SZ		0x00400000	/* MIPS Size of Flash Region 1 */
-+
-+#define	SB_ROM			0x20000000	/* ARM ROM */
-+#define	SB_SRAM2		0x80000000	/* ARM SRAM Region 2 */
-+#define	SB_ARM_FLASH1		0xffff0000	/* ARM Flash Region 1 */
-+#define	SB_ARM_FLASH1_SZ	0x00010000	/* ARM Size of Flash Region 1 */
-+
-+#define SB_PCI_DMA		0x40000000	/* Client Mode sb2pcitranslation2 (1 GB) */
-+#define SB_PCI_DMA_SZ		0x40000000	/* Client Mode sb2pcitranslation2 size in bytes */
-+#define SB_PCIE_DMA_L32		0x00000000	/* PCIE Client Mode sb2pcitranslation2
-+						 * (2 ZettaBytes), low 32 bits
-+						 */
-+#define SB_PCIE_DMA_H32		0x80000000	/* PCIE Client Mode sb2pcitranslation2
-+						 * (2 ZettaBytes), high 32 bits
-+						 */
-+#define	SB_EUART		(SB_EXTIF_BASE + 0x00800000)
-+#define	SB_LED			(SB_EXTIF_BASE + 0x00900000)
-+
-+
-+/* enumeration space related defs */
-+#define SB_CORE_SIZE    	0x1000		/* each core gets 4Kbytes for registers */
-+#define	SB_MAXCORES		((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE)
-+#define SB_MAXFUNCS		4		/* max. # functions per core */
-+#define	SBCONFIGOFF		0xf00		/* core sbconfig regs are top 256bytes of regs */
-+#define	SBCONFIGSIZE		256		/* sizeof (sbconfig_t) */
-+
-+/* mips address */
-+#define	SB_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
-+
-+/*
-+ * Sonics Configuration Space Registers.
-+ */
-+#define SBIPSFLAG		0x08
-+#define SBTPSFLAG		0x18
-+#define	SBTMERRLOGA		0x48		/* sonics >= 2.3 */
-+#define	SBTMERRLOG		0x50		/* sonics >= 2.3 */
-+#define SBADMATCH3		0x60
-+#define SBADMATCH2		0x68
-+#define SBADMATCH1		0x70
-+#define SBIMSTATE		0x90
-+#define SBINTVEC		0x94
-+#define SBTMSTATELOW		0x98
-+#define SBTMSTATEHIGH		0x9c
-+#define SBBWA0			0xa0
-+#define SBIMCONFIGLOW		0xa8
-+#define SBIMCONFIGHIGH		0xac
-+#define SBADMATCH0		0xb0
-+#define SBTMCONFIGLOW		0xb8
-+#define SBTMCONFIGHIGH		0xbc
-+#define SBBCONFIG		0xc0
-+#define SBBSTATE		0xc8
-+#define SBACTCNFG		0xd8
-+#define	SBFLAGST		0xe8
-+#define SBIDLOW			0xf8
-+#define SBIDHIGH		0xfc
-+
-+/* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have
-+ * a few registers *below* that line. I think it would be very confusing to try
-+ * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here,
-+ */
-+
-+#define SBIMERRLOGA		0xea8
-+#define SBIMERRLOG		0xeb0
-+#define SBTMPORTCONNID0		0xed8
-+#define SBTMPORTLOCK0		0xef8
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+typedef volatile struct _sbconfig {
-+	uint32	PAD[2];
-+	uint32	sbipsflag;		/* initiator port ocp slave flag */
-+	uint32	PAD[3];
-+	uint32	sbtpsflag;		/* target port ocp slave flag */
-+	uint32	PAD[11];
-+	uint32	sbtmerrloga;		/* (sonics >= 2.3) */
-+	uint32	PAD;
-+	uint32	sbtmerrlog;		/* (sonics >= 2.3) */
-+	uint32	PAD[3];
-+	uint32	sbadmatch3;		/* address match3 */
-+	uint32	PAD;
-+	uint32	sbadmatch2;		/* address match2 */
-+	uint32	PAD;
-+	uint32	sbadmatch1;		/* address match1 */
-+	uint32	PAD[7];
-+	uint32	sbimstate;		/* initiator agent state */
-+	uint32	sbintvec;		/* interrupt mask */
-+	uint32	sbtmstatelow;		/* target state */
-+	uint32	sbtmstatehigh;		/* target state */
-+	uint32	sbbwa0;			/* bandwidth allocation table0 */
-+	uint32	PAD;
-+	uint32	sbimconfiglow;		/* initiator configuration */
-+	uint32	sbimconfighigh;		/* initiator configuration */
-+	uint32	sbadmatch0;		/* address match0 */
-+	uint32	PAD;
-+	uint32	sbtmconfiglow;		/* target configuration */
-+	uint32	sbtmconfighigh;		/* target configuration */
-+	uint32	sbbconfig;		/* broadcast configuration */
-+	uint32	PAD;
-+	uint32	sbbstate;		/* broadcast state */
-+	uint32	PAD[3];
-+	uint32	sbactcnfg;		/* activate configuration */
-+	uint32	PAD[3];
-+	uint32	sbflagst;		/* current sbflags */
-+	uint32	PAD[3];
-+	uint32	sbidlow;		/* identification */
-+	uint32	sbidhigh;		/* identification */
-+} sbconfig_t;
-+
-+#endif /* _LANGUAGE_ASSEMBLY */
-+
-+/* sbipsflag */
-+#define	SBIPS_INT1_MASK		0x3f		/* which sbflags get routed to mips interrupt 1 */
-+#define	SBIPS_INT1_SHIFT	0
-+#define	SBIPS_INT2_MASK		0x3f00		/* which sbflags get routed to mips interrupt 2 */
-+#define	SBIPS_INT2_SHIFT	8
-+#define	SBIPS_INT3_MASK		0x3f0000	/* which sbflags get routed to mips interrupt 3 */
-+#define	SBIPS_INT3_SHIFT	16
-+#define	SBIPS_INT4_MASK		0x3f000000	/* which sbflags get routed to mips interrupt 4 */
-+#define	SBIPS_INT4_SHIFT	24
-+
-+/* sbtpsflag */
-+#define	SBTPS_NUM0_MASK		0x3f		/* interrupt sbFlag # generated by this core */
-+#define	SBTPS_F0EN0		0x40		/* interrupt is always sent on the backplane */
-+
-+/* sbtmerrlog */
-+#define	SBTMEL_CM		0x00000007	/* command */
-+#define	SBTMEL_CI		0x0000ff00	/* connection id */
-+#define	SBTMEL_EC		0x0f000000	/* error code */
-+#define	SBTMEL_ME		0x80000000	/* multiple error */
-+
-+/* sbimstate */
-+#define	SBIM_PC			0xf		/* pipecount */
-+#define	SBIM_AP_MASK		0x30		/* arbitration policy */
-+#define	SBIM_AP_BOTH		0x00		/* use both timeslaces and token */
-+#define	SBIM_AP_TS		0x10		/* use timesliaces only */
-+#define	SBIM_AP_TK		0x20		/* use token only */
-+#define	SBIM_AP_RSV		0x30		/* reserved */
-+#define	SBIM_IBE		0x20000		/* inbanderror */
-+#define	SBIM_TO			0x40000		/* timeout */
-+#define	SBIM_BY			0x01800000	/* busy (sonics >= 2.3) */
-+#define	SBIM_RJ			0x02000000	/* reject (sonics >= 2.3) */
-+
-+/* sbtmstatelow */
-+#define	SBTML_RESET		0x1		/* reset */
-+#define	SBTML_REJ_MASK		0x6		/* reject */
-+#define	SBTML_REJ_SHIFT		1
-+#define	SBTML_CLK		0x10000		/* clock enable */
-+#define	SBTML_FGC		0x20000		/* force gated clocks on */
-+#define	SBTML_FL_MASK		0x3ffc0000	/* core-specific flags */
-+#define	SBTML_PE		0x40000000	/* pme enable */
-+#define	SBTML_BE		0x80000000	/* bist enable */
-+
-+/* sbtmstatehigh */
-+#define	SBTMH_SERR		0x1		/* serror */
-+#define	SBTMH_INT		0x2		/* interrupt */
-+#define	SBTMH_BUSY		0x4		/* busy */
-+#define	SBTMH_TO		0x00000020	/* timeout (sonics >= 2.3) */
-+#define	SBTMH_FL_MASK		0x1fff0000	/* core-specific flags */
-+#define SBTMH_DMA64		0x10000000      /* supports DMA with 64-bit addresses */
-+#define	SBTMH_GCR		0x20000000	/* gated clock request */
-+#define	SBTMH_BISTF		0x40000000	/* bist failed */
-+#define	SBTMH_BISTD		0x80000000	/* bist done */
-+
-+
-+/* sbbwa0 */
-+#define	SBBWA_TAB0_MASK		0xffff		/* lookup table 0 */
-+#define	SBBWA_TAB1_MASK		0xffff		/* lookup table 1 */
-+#define	SBBWA_TAB1_SHIFT	16
-+
-+/* sbimconfiglow */
-+#define	SBIMCL_STO_MASK		0x7		/* service timeout */
-+#define	SBIMCL_RTO_MASK		0x70		/* request timeout */
-+#define	SBIMCL_RTO_SHIFT	4
-+#define	SBIMCL_CID_MASK		0xff0000	/* connection id */
-+#define	SBIMCL_CID_SHIFT	16
-+
-+/* sbimconfighigh */
-+#define	SBIMCH_IEM_MASK		0xc		/* inband error mode */
-+#define	SBIMCH_TEM_MASK		0x30		/* timeout error mode */
-+#define	SBIMCH_TEM_SHIFT	4
-+#define	SBIMCH_BEM_MASK		0xc0		/* bus error mode */
-+#define	SBIMCH_BEM_SHIFT	6
-+
-+/* sbadmatch0 */
-+#define	SBAM_TYPE_MASK		0x3		/* address type */
-+#define	SBAM_AD64		0x4		/* reserved */
-+#define	SBAM_ADINT0_MASK	0xf8		/* type0 size */
-+#define	SBAM_ADINT0_SHIFT	3
-+#define	SBAM_ADINT1_MASK	0x1f8		/* type1 size */
-+#define	SBAM_ADINT1_SHIFT	3
-+#define	SBAM_ADINT2_MASK	0x1f8		/* type2 size */
-+#define	SBAM_ADINT2_SHIFT	3
-+#define	SBAM_ADEN		0x400		/* enable */
-+#define	SBAM_ADNEG		0x800		/* negative decode */
-+#define	SBAM_BASE0_MASK		0xffffff00	/* type0 base address */
-+#define	SBAM_BASE0_SHIFT	8
-+#define	SBAM_BASE1_MASK		0xfffff000	/* type1 base address for the core */
-+#define	SBAM_BASE1_SHIFT	12
-+#define	SBAM_BASE2_MASK		0xffff0000	/* type2 base address for the core */
-+#define	SBAM_BASE2_SHIFT	16
-+
-+/* sbtmconfiglow */
-+#define	SBTMCL_CD_MASK		0xff		/* clock divide */
-+#define	SBTMCL_CO_MASK		0xf800		/* clock offset */
-+#define	SBTMCL_CO_SHIFT		11
-+#define	SBTMCL_IF_MASK		0xfc0000	/* interrupt flags */
-+#define	SBTMCL_IF_SHIFT		18
-+#define	SBTMCL_IM_MASK		0x3000000	/* interrupt mode */
-+#define	SBTMCL_IM_SHIFT		24
-+
-+/* sbtmconfighigh */
-+#define	SBTMCH_BM_MASK		0x3		/* busy mode */
-+#define	SBTMCH_RM_MASK		0x3		/* retry mode */
-+#define	SBTMCH_RM_SHIFT		2
-+#define	SBTMCH_SM_MASK		0x30		/* stop mode */
-+#define	SBTMCH_SM_SHIFT		4
-+#define	SBTMCH_EM_MASK		0x300		/* sb error mode */
-+#define	SBTMCH_EM_SHIFT		8
-+#define	SBTMCH_IM_MASK		0xc00		/* int mode */
-+#define	SBTMCH_IM_SHIFT		10
-+
-+/* sbbconfig */
-+#define	SBBC_LAT_MASK		0x3		/* sb latency */
-+#define	SBBC_MAX0_MASK		0xf0000		/* maxccntr0 */
-+#define	SBBC_MAX0_SHIFT		16
-+#define	SBBC_MAX1_MASK		0xf00000	/* maxccntr1 */
-+#define	SBBC_MAX1_SHIFT		20
-+
-+/* sbbstate */
-+#define	SBBS_SRD		0x1		/* st reg disable */
-+#define	SBBS_HRD		0x2		/* hold reg disable */
-+
-+/* sbidlow */
-+#define	SBIDL_CS_MASK		0x3		/* config space */
-+#define	SBIDL_AR_MASK		0x38		/* # address ranges supported */
-+#define	SBIDL_AR_SHIFT		3
-+#define	SBIDL_SYNCH		0x40		/* sync */
-+#define	SBIDL_INIT		0x80		/* initiator */
-+#define	SBIDL_MINLAT_MASK	0xf00		/* minimum backplane latency */
-+#define	SBIDL_MINLAT_SHIFT	8
-+#define	SBIDL_MAXLAT		0xf000		/* maximum backplane latency */
-+#define	SBIDL_MAXLAT_SHIFT	12
-+#define	SBIDL_FIRST		0x10000		/* this initiator is first */
-+#define	SBIDL_CW_MASK		0xc0000		/* cycle counter width */
-+#define	SBIDL_CW_SHIFT		18
-+#define	SBIDL_TP_MASK		0xf00000	/* target ports */
-+#define	SBIDL_TP_SHIFT		20
-+#define	SBIDL_IP_MASK		0xf000000	/* initiator ports */
-+#define	SBIDL_IP_SHIFT		24
-+#define	SBIDL_RV_MASK		0xf0000000	/* sonics backplane revision code */
-+#define	SBIDL_RV_SHIFT		28
-+#define	SBIDL_RV_2_2		0x00000000	/* version 2.2 or earlier */
-+#define	SBIDL_RV_2_3		0x10000000	/* version 2.3 */
-+
-+/* sbidhigh */
-+#define	SBIDH_RC_MASK		0x000f		/* revision code */
-+#define	SBIDH_RCE_MASK		0x7000		/* revision code extension field */
-+#define	SBIDH_RCE_SHIFT		8
-+#define	SBCOREREV(sbidh) \
-+	((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK))
-+#define	SBIDH_CC_MASK		0x8ff0		/* core code */
-+#define	SBIDH_CC_SHIFT		4
-+#define	SBIDH_VC_MASK		0xffff0000	/* vendor code */
-+#define	SBIDH_VC_SHIFT		16
-+
-+#define	SB_COMMIT		0xfd8		/* update buffered registers value */
-+
-+/* vendor codes */
-+#define	SB_VEND_BCM		0x4243		/* Broadcom's SB vendor code */
-+
-+/* core codes */
-+#define	SB_NODEV		0x700		/* Invalid coreid */
-+#define	SB_CC			0x800		/* chipcommon core */
-+#define	SB_ILINE20		0x801		/* iline20 core */
-+#define	SB_SDRAM		0x803		/* sdram core */
-+#define	SB_PCI			0x804		/* pci core */
-+#define	SB_MIPS			0x805		/* mips core */
-+#define	SB_ENET			0x806		/* enet mac core */
-+#define	SB_CODEC		0x807		/* v90 codec core */
-+#define	SB_USB			0x808		/* usb 1.1 host/device core */
-+#define	SB_ADSL			0x809		/* ADSL core */
-+#define	SB_ILINE100		0x80a		/* iline100 core */
-+#define	SB_IPSEC		0x80b		/* ipsec core */
-+#define	SB_PCMCIA		0x80d		/* pcmcia core */
-+#define SB_SDIOD		SB_PCMCIA	/* pcmcia core has sdio device */
-+#define	SB_SOCRAM		0x80e		/* internal memory core */
-+#define	SB_MEMC			0x80f		/* memc sdram core */
-+#define	SB_EXTIF		0x811		/* external interface core */
-+#define	SB_D11			0x812		/* 802.11 MAC core */
-+#define	SB_MIPS33		0x816		/* mips3302 core */
-+#define	SB_USB11H		0x817		/* usb 1.1 host core */
-+#define	SB_USB11D		0x818		/* usb 1.1 device core */
-+#define	SB_USB20H		0x819		/* usb 2.0 host core */
-+#define	SB_USB20D		0x81a		/* usb 2.0 device core */
-+#define	SB_SDIOH		0x81b		/* sdio host core */
-+#define	SB_ROBO			0x81c		/* roboswitch core */
-+#define	SB_ATA100		0x81d		/* parallel ATA core */
-+#define	SB_SATAXOR		0x81e		/* serial ATA & XOR DMA core */
-+#define	SB_GIGETH		0x81f		/* gigabit ethernet core */
-+#define	SB_PCIE			0x820		/* pci express core */
-+#define	SB_MIMO			0x821		/* MIMO phy core */
-+#define	SB_SRAMC		0x822		/* SRAM controller core */
-+#define	SB_MINIMAC		0x823		/* MINI MAC/phy core */
-+#define	SB_ARM11		0x824		/* ARM 1176 core */
-+#define	SB_ARM7			0x825		/* ARM 7tdmi core */
-+
-+#define	SB_CC_IDX		0		/* chipc, when present, is always core 0 */
-+
-+/* Not really related to Silicon Backplane, but a couple of software
-+ * conventions for the use the flash space:
-+ */
-+
-+/* Minumum amount of flash we support */
-+#define FLASH_MIN		0x00020000	/* Minimum flash size */
-+
-+/* A boot/binary may have an embedded block that describes its size  */
-+#define	BISZ_OFFSET		0x3e0		/* At this offset into the binary */
-+#define	BISZ_MAGIC		0x4249535a	/* Marked with this value: 'BISZ' */
-+#define	BISZ_MAGIC_IDX		0		/* Word 0: magic */
-+#define	BISZ_TXTST_IDX		1		/*	1: text start */
-+#define	BISZ_TXTEND_IDX		2		/*	2: text start */
-+#define	BISZ_DATAST_IDX		3		/*	3: text start */
-+#define	BISZ_DATAEND_IDX	4		/*	4: text start */
-+#define	BISZ_BSSST_IDX		5		/*	5: text start */
-+#define	BISZ_BSSEND_IDX		6		/*	6: text start */
-+#define BISZ_SIZE		7		/* descriptor size in 32-bit intergers */
-+
-+#endif	/* _SBCONFIG_H */
-diff -urN linux.old/arch/mips/bcm947xx/include/sbextif.h linux.dev/arch/mips/bcm947xx/include/sbextif.h
---- linux.old/arch/mips/bcm947xx/include/sbextif.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbextif.h	2006-04-27 22:13:03.000000000 +0200
-@@ -0,0 +1,243 @@
-+/*
-+ * Hardware-specific External Interface I/O core definitions
-+ * for the BCM47xx family of SiliconBackplane-based chips.
-+ *
-+ * The External Interface core supports a total of three external chip selects
-+ * supporting external interfaces. One of the external chip selects is
-+ * used for Flash, one is used for PCMCIA, and the other may be
-+ * programmed to support either a synchronous interface or an
-+ * asynchronous interface. The asynchronous interface can be used to
-+ * support external devices such as UARTs and the BCM2019 Bluetooth
-+ * baseband processor.
-+ * The external interface core also contains 2 on-chip 16550 UARTs, clock
-+ * frequency control, a watchdog interrupt timer, and a GPIO interface.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbextif.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef	_SBEXTIF_H
-+#define	_SBEXTIF_H
-+
-+/* external interface address space */
-+#define	EXTIF_PCMCIA_MEMBASE(x)	(x)
-+#define	EXTIF_PCMCIA_IOBASE(x)	((x) + 0x100000)
-+#define	EXTIF_PCMCIA_CFGBASE(x)	((x) + 0x200000)
-+#define	EXTIF_CFGIF_BASE(x)	((x) + 0x800000)
-+#define	EXTIF_FLASH_BASE(x)	((x) + 0xc00000)
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif	/* PAD */
-+
-+/*
-+ * The multiple instances of output and output enable registers
-+ * are present to allow driver software for multiple cores to control
-+ * gpio outputs without needing to share a single register pair.
-+ */
-+struct gpiouser {
-+	uint32	out;
-+	uint32	outen;
-+};
-+#define	NGPIOUSER	5
-+
-+typedef volatile struct {
-+	uint32	corecontrol;
-+	uint32	extstatus;
-+	uint32	PAD[2];
-+
-+	/* pcmcia control registers */
-+	uint32	pcmcia_config;
-+	uint32	pcmcia_memwait;
-+	uint32	pcmcia_attrwait;
-+	uint32	pcmcia_iowait;
-+
-+	/* programmable interface control registers */
-+	uint32	prog_config;
-+	uint32	prog_waitcount;
-+
-+	/* flash control registers */
-+	uint32	flash_config;
-+	uint32	flash_waitcount;
-+	uint32	PAD[4];
-+
-+	uint32	watchdog;
-+
-+	/* clock control */
-+	uint32	clockcontrol_n;
-+	uint32	clockcontrol_sb;
-+	uint32	clockcontrol_pci;
-+	uint32	clockcontrol_mii;
-+	uint32	PAD[3];
-+
-+	/* gpio */
-+	uint32	gpioin;
-+	struct gpiouser	gpio[NGPIOUSER];
-+	uint32	PAD;
-+	uint32	ejtagouten;
-+	uint32	gpiointpolarity;
-+	uint32	gpiointmask;
-+	uint32	PAD[153];
-+
-+	uint8	uartdata;
-+	uint8	PAD[3];
-+	uint8	uartimer;
-+	uint8	PAD[3];
-+	uint8	uartfcr;
-+	uint8	PAD[3];
-+	uint8	uartlcr;
-+	uint8	PAD[3];
-+	uint8	uartmcr;
-+	uint8	PAD[3];
-+	uint8	uartlsr;
-+	uint8	PAD[3];
-+	uint8	uartmsr;
-+	uint8	PAD[3];
-+	uint8	uartscratch;
-+	uint8	PAD[3];
-+} extifregs_t;
-+
-+/* corecontrol */
-+#define	CC_UE		(1 << 0)		/* uart enable */
-+
-+/* extstatus */
-+#define	ES_EM		(1 << 0)		/* endian mode (ro) */
-+#define	ES_EI		(1 << 1)		/* external interrupt pin (ro) */
-+#define	ES_GI		(1 << 2)		/* gpio interrupt pin (ro) */
-+
-+/* gpio bit mask */
-+#define GPIO_BIT0	(1 << 0)
-+#define GPIO_BIT1	(1 << 1)
-+#define GPIO_BIT2	(1 << 2)
-+#define GPIO_BIT3	(1 << 3)
-+#define GPIO_BIT4	(1 << 4)
-+#define GPIO_BIT5	(1 << 5)
-+#define GPIO_BIT6	(1 << 6)
-+#define GPIO_BIT7	(1 << 7)
-+
-+
-+/* pcmcia/prog/flash_config */
-+#define	CF_EN		(1 << 0)		/* enable */
-+#define	CF_EM_MASK	0xe			/* mode */
-+#define	CF_EM_SHIFT	1
-+#define	CF_EM_FLASH	0x0			/* flash/asynchronous mode */
-+#define	CF_EM_SYNC	0x2			/* synchronous mode */
-+#define	CF_EM_PCMCIA	0x4			/* pcmcia mode */
-+#define	CF_DS		(1 << 4)		/* destsize:  0=8bit, 1=16bit */
-+#define	CF_BS		(1 << 5)		/* byteswap */
-+#define	CF_CD_MASK	0xc0			/* clock divider */
-+#define	CF_CD_SHIFT	6
-+#define	CF_CD_DIV2	0x0			/* backplane/2 */
-+#define	CF_CD_DIV3	0x40			/* backplane/3 */
-+#define	CF_CD_DIV4	0x80			/* backplane/4 */
-+#define	CF_CE		(1 << 8)		/* clock enable */
-+#define	CF_SB		(1 << 9)		/* size/bytestrobe (synch only) */
-+
-+/* pcmcia_memwait */
-+#define	PM_W0_MASK	0x3f			/* waitcount0 */
-+#define	PM_W1_MASK	0x1f00			/* waitcount1 */
-+#define	PM_W1_SHIFT	8
-+#define	PM_W2_MASK	0x1f0000		/* waitcount2 */
-+#define	PM_W2_SHIFT	16
-+#define	PM_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	PM_W3_SHIFT	24
-+
-+/* pcmcia_attrwait */
-+#define	PA_W0_MASK	0x3f			/* waitcount0 */
-+#define	PA_W1_MASK	0x1f00			/* waitcount1 */
-+#define	PA_W1_SHIFT	8
-+#define	PA_W2_MASK	0x1f0000		/* waitcount2 */
-+#define	PA_W2_SHIFT	16
-+#define	PA_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	PA_W3_SHIFT	24
-+
-+/* pcmcia_iowait */
-+#define	PI_W0_MASK	0x3f			/* waitcount0 */
-+#define	PI_W1_MASK	0x1f00			/* waitcount1 */
-+#define	PI_W1_SHIFT	8
-+#define	PI_W2_MASK	0x1f0000		/* waitcount2 */
-+#define	PI_W2_SHIFT	16
-+#define	PI_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	PI_W3_SHIFT	24
-+
-+/* prog_waitcount */
-+#define	PW_W0_MASK	0x0000001f			/* waitcount0 */
-+#define	PW_W1_MASK	0x00001f00			/* waitcount1 */
-+#define	PW_W1_SHIFT	8
-+#define	PW_W2_MASK	0x001f0000		/* waitcount2 */
-+#define	PW_W2_SHIFT	16
-+#define	PW_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	PW_W3_SHIFT	24
-+
-+#define PW_W0       0x0000000c
-+#define PW_W1       0x00000a00
-+#define PW_W2       0x00020000
-+#define PW_W3       0x01000000
-+
-+/* flash_waitcount */
-+#define	FW_W0_MASK	0x1f			/* waitcount0 */
-+#define	FW_W1_MASK	0x1f00			/* waitcount1 */
-+#define	FW_W1_SHIFT	8
-+#define	FW_W2_MASK	0x1f0000		/* waitcount2 */
-+#define	FW_W2_SHIFT	16
-+#define	FW_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	FW_W3_SHIFT	24
-+
-+/* watchdog */
-+#define WATCHDOG_CLOCK	48000000		/* Hz */
-+
-+/* clockcontrol_n */
-+#define	CN_N1_MASK	0x3f			/* n1 control */
-+#define	CN_N2_MASK	0x3f00			/* n2 control */
-+#define	CN_N2_SHIFT	8
-+
-+/* clockcontrol_sb/pci/mii */
-+#define	CC_M1_MASK	0x3f			/* m1 control */
-+#define	CC_M2_MASK	0x3f00			/* m2 control */
-+#define	CC_M2_SHIFT	8
-+#define	CC_M3_MASK	0x3f0000		/* m3 control */
-+#define	CC_M3_SHIFT	16
-+#define	CC_MC_MASK	0x1f000000		/* mux control */
-+#define	CC_MC_SHIFT	24
-+
-+/* Clock control default values */
-+#define CC_DEF_N	0x0009			/* Default values for bcm4710 */
-+#define CC_DEF_100	0x04020011
-+#define CC_DEF_33	0x11030011
-+#define CC_DEF_25	0x11050011
-+
-+/* Clock control values for 125Mhz */
-+#define	CC_125_N	0x0802
-+#define	CC_125_M	0x04020009
-+#define	CC_125_M25	0x11090009
-+#define	CC_125_M33	0x11090005
-+
-+/* Clock control magic field values */
-+#define	CC_F6_2		0x02			/* A factor of 2 in */
-+#define	CC_F6_3		0x03			/*  6-bit fields like */
-+#define	CC_F6_4		0x05			/*  N1, M1 or M3 */
-+#define	CC_F6_5		0x09
-+#define	CC_F6_6		0x11
-+#define	CC_F6_7		0x21
-+
-+#define	CC_F5_BIAS	5			/* 5-bit fields get this added */
-+
-+#define	CC_MC_BYPASS	0x08
-+#define	CC_MC_M1	0x04
-+#define	CC_MC_M1M2	0x02
-+#define	CC_MC_M1M2M3	0x01
-+#define	CC_MC_M1M3	0x11
-+
-+#define	CC_CLOCK_BASE	24000000	/* Half the clock freq. in the 4710 */
-+
-+#endif	/* _SBEXTIF_H */
-diff -urN linux.old/arch/mips/bcm947xx/include/sbhndmips.h linux.dev/arch/mips/bcm947xx/include/sbhndmips.h
---- linux.old/arch/mips/bcm947xx/include/sbhndmips.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbhndmips.h	2006-04-27 20:43:56.000000000 +0200
-@@ -0,0 +1,47 @@
-+/*
-+ * Broadcom SiliconBackplane MIPS definitions
-+ *
-+ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane
-+ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits
-+ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP
-+ * interface. The core revision is stored in the SB ID register in SB
-+ * configuration space.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbhndmips.h,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef	_sbhndmips_h_
-+#define	_sbhndmips_h_
-+
-+#include <mipsinc.h>
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif	/* PAD */
-+
-+typedef volatile struct {
-+	uint32	corecontrol;
-+	uint32	PAD[2];
-+	uint32	biststatus;
-+	uint32	PAD[4];
-+	uint32	intstatus;
-+	uint32	intmask;
-+	uint32	timer;
-+} mipsregs_t;
-+
-+#endif	/* _LANGUAGE_ASSEMBLY */
-+
-+#endif	/* _sbhndmips_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/sbmemc.h linux.dev/arch/mips/bcm947xx/include/sbmemc.h
---- linux.old/arch/mips/bcm947xx/include/sbmemc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbmemc.h	2006-04-27 22:12:41.000000000 +0200
-@@ -0,0 +1,147 @@
-+/*
-+ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbmemc.h,v 1.6 2006/03/02 12:33:44 honor Exp $
-+ */
-+
-+#ifndef	_SBMEMC_H
-+#define	_SBMEMC_H
-+
-+#ifdef _LANGUAGE_ASSEMBLY
-+
-+#define	MEMC_CONTROL		0x00
-+#define	MEMC_CONFIG		0x04
-+#define	MEMC_REFRESH		0x08
-+#define	MEMC_BISTSTAT		0x0c
-+#define	MEMC_MODEBUF		0x10
-+#define	MEMC_BKCLS		0x14
-+#define	MEMC_PRIORINV		0x18
-+#define	MEMC_DRAMTIM		0x1c
-+#define	MEMC_INTSTAT		0x20
-+#define	MEMC_INTMASK		0x24
-+#define	MEMC_INTINFO		0x28
-+#define	MEMC_NCDLCTL		0x30
-+#define	MEMC_RDNCDLCOR		0x34
-+#define	MEMC_WRNCDLCOR		0x38
-+#define	MEMC_MISCDLYCTL		0x3c
-+#define	MEMC_DQSGATENCDL	0x40
-+#define	MEMC_SPARE		0x44
-+#define	MEMC_TPADDR		0x48
-+#define	MEMC_TPDATA		0x4c
-+#define	MEMC_BARRIER		0x50
-+#define	MEMC_CORE		0x54
-+
-+#else	/* !_LANGUAGE_ASSEMBLY */
-+
-+/* Sonics side: MEMC core registers */
-+typedef volatile struct sbmemcregs {
-+	uint32	control;
-+	uint32	config;
-+	uint32	refresh;
-+	uint32	biststat;
-+	uint32	modebuf;
-+	uint32	bkcls;
-+	uint32	priorinv;
-+	uint32	dramtim;
-+	uint32	intstat;
-+	uint32	intmask;
-+	uint32	intinfo;
-+	uint32	reserved1;
-+	uint32	ncdlctl;
-+	uint32	rdncdlcor;
-+	uint32	wrncdlcor;
-+	uint32	miscdlyctl;
-+	uint32	dqsgatencdl;
-+	uint32	spare;
-+	uint32	tpaddr;
-+	uint32	tpdata;
-+	uint32	barrier;
-+	uint32	core;
-+} sbmemcregs_t;
-+
-+#endif	/* _LANGUAGE_ASSEMBLY */
-+
-+/* MEMC Core Init values (OCP ID 0x80f) */
-+
-+/* For sdr: */
-+#define MEMC_SD_CONFIG_INIT	0x00048000
-+#define MEMC_SD_DRAMTIM2_INIT	0x000754d8
-+#define MEMC_SD_DRAMTIM3_INIT	0x000754da
-+#define MEMC_SD_RDNCDLCOR_INIT	0x00000000
-+#define MEMC_SD_WRNCDLCOR_INIT	0x49351200
-+#define MEMC_SD1_WRNCDLCOR_INIT	0x14500200	/* For corerev 1 (4712) */
-+#define MEMC_SD_MISCDLYCTL_INIT	0x00061c1b
-+#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416	/* For corerev 1 (4712) */
-+#define MEMC_SD_CONTROL_INIT0	0x00000002
-+#define MEMC_SD_CONTROL_INIT1	0x00000008
-+#define MEMC_SD_CONTROL_INIT2	0x00000004
-+#define MEMC_SD_CONTROL_INIT3	0x00000010
-+#define MEMC_SD_CONTROL_INIT4	0x00000001
-+#define MEMC_SD_MODEBUF_INIT	0x00000000
-+#define MEMC_SD_REFRESH_INIT	0x0000840f
-+
-+
-+/* This is for SDRM8X8X4 */
-+#define	MEMC_SDR_INIT		0x0008
-+#define	MEMC_SDR_MODE		0x32
-+#define	MEMC_SDR_NCDL		0x00020032
-+#define	MEMC_SDR1_NCDL		0x0002020f	/* For corerev 1 (4712) */
-+
-+/* For ddr: */
-+#define MEMC_CONFIG_INIT	0x00048000
-+#define MEMC_DRAMTIM2_INIT	0x000754d8
-+#define MEMC_DRAMTIM25_INIT	0x000754d9
-+#define MEMC_RDNCDLCOR_INIT	0x00000000
-+#define MEMC_RDNCDLCOR_SIMINIT	0xf6f6f6f6	/* For hdl sim */
-+#define MEMC_WRNCDLCOR_INIT	0x49351200
-+#define MEMC_1_WRNCDLCOR_INIT	0x14500200
-+#define MEMC_DQSGATENCDL_INIT	0x00030000
-+#define MEMC_MISCDLYCTL_INIT	0x21061c1b
-+#define MEMC_1_MISCDLYCTL_INIT	0x21021400
-+#define MEMC_NCDLCTL_INIT	0x00002001
-+#define MEMC_CONTROL_INIT0	0x00000002
-+#define MEMC_CONTROL_INIT1	0x00000008
-+#define MEMC_MODEBUF_INIT0	0x00004000
-+#define MEMC_CONTROL_INIT2	0x00000010
-+#define MEMC_MODEBUF_INIT1	0x00000100
-+#define MEMC_CONTROL_INIT3	0x00000010
-+#define MEMC_CONTROL_INIT4	0x00000008
-+#define MEMC_REFRESH_INIT	0x0000840f
-+#define MEMC_CONTROL_INIT5	0x00000004
-+#define MEMC_MODEBUF_INIT2	0x00000000
-+#define MEMC_CONTROL_INIT6	0x00000010
-+#define MEMC_CONTROL_INIT7	0x00000001
-+
-+
-+/* This is for DDRM16X16X2 */
-+#define	MEMC_DDR_INIT		0x0009
-+#define	MEMC_DDR_MODE		0x62
-+#define	MEMC_DDR_NCDL		0x0005050a
-+#define	MEMC_DDR1_NCDL		0x00000a0a	/* For corerev 1 (4712) */
-+
-+/* mask for sdr/ddr calibration registers */
-+#define MEMC_RDNCDLCOR_RD_MASK	0x000000ff
-+#define MEMC_WRNCDLCOR_WR_MASK	0x000000ff
-+#define MEMC_DQSGATENCDL_G_MASK	0x000000ff
-+
-+/* masks for miscdlyctl registers */
-+#define MEMC_MISC_SM_MASK	0x30000000
-+#define MEMC_MISC_SM_SHIFT	28
-+#define MEMC_MISC_SD_MASK	0x0f000000
-+#define MEMC_MISC_SD_SHIFT	24
-+
-+/* hw threshhold for calculating wr/rd for sdr memc */
-+#define MEMC_CD_THRESHOLD	128
-+
-+/* Low bit of init register says if memc is ddr or sdr */
-+#define MEMC_CONFIG_DDR		0x00000001
-+
-+#endif	/* _SBMEMC_H */
-diff -urN linux.old/arch/mips/bcm947xx/include/sbpci.h linux.dev/arch/mips/bcm947xx/include/sbpci.h
---- linux.old/arch/mips/bcm947xx/include/sbpci.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbpci.h	2006-05-02 17:20:14.000000000 +0200
-@@ -0,0 +1,114 @@
-+/*
-+ * HND SiliconBackplane PCI core hardware definitions.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbpci.h,v 1.1.1.11 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef	_sbpci_h_
-+#define	_sbpci_h_
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif
-+
-+/* Sonics side: PCI core and host control registers */
-+typedef struct sbpciregs {
-+	uint32 control;		/* PCI control */
-+	uint32 PAD[3];
-+	uint32 arbcontrol;	/* PCI arbiter control */
-+	uint32 PAD[3];
-+	uint32 intstatus;	/* Interrupt status */
-+	uint32 intmask;		/* Interrupt mask */
-+	uint32 sbtopcimailbox;	/* Sonics to PCI mailbox */
-+	uint32 PAD[9];
-+	uint32 bcastaddr;	/* Sonics broadcast address */
-+	uint32 bcastdata;	/* Sonics broadcast data */
-+	uint32 PAD[2];
-+	uint32 gpioin;		/* ro: gpio input (>=rev2) */
-+	uint32 gpioout;		/* rw: gpio output (>=rev2) */
-+	uint32 gpioouten;	/* rw: gpio output enable (>= rev2) */
-+	uint32 gpiocontrol;	/* rw: gpio control (>= rev2) */
-+	uint32 PAD[36];
-+	uint32 sbtopci0;	/* Sonics to PCI translation 0 */
-+	uint32 sbtopci1;	/* Sonics to PCI translation 1 */
-+	uint32 sbtopci2;	/* Sonics to PCI translation 2 */
-+	uint32 PAD[189];
-+	uint32 pcicfg[4][64];	/* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */
-+	uint16 sprom[36];	/* SPROM shadow Area */
-+	uint32 PAD[46];
-+} sbpciregs_t;
-+
-+#endif	/* _LANGUAGE_ASSEMBLY */
-+
-+/* PCI control */
-+#define PCI_RST_OE	0x01	/* When set, drives PCI_RESET out to pin */
-+#define PCI_RST		0x02	/* Value driven out to pin */
-+#define PCI_CLK_OE	0x04	/* When set, drives clock as gated by PCI_CLK out to pin */
-+#define PCI_CLK		0x08	/* Gate for clock driven out to pin */
-+
-+/* PCI arbiter control */
-+#define PCI_INT_ARB	0x01	/* When set, use an internal arbiter */
-+#define PCI_EXT_ARB	0x02	/* When set, use an external arbiter */
-+/* ParkID - for PCI corerev >= 8 */
-+#define PCI_PARKID_MASK		0x1c	/* Selects which agent is parked on an idle bus */
-+#define PCI_PARKID_SHIFT	2
-+#define PCI_PARKID_EXT0		0	/* External master 0 */
-+#define PCI_PARKID_EXT1		1	/* External master 1 */
-+#define PCI_PARKID_EXT2		2	/* External master 2 */
-+#define PCI_PARKID_INT		3	/* Internal master */
-+#define PCI_PARKID_LAST		4	/* Last active master */
-+
-+/* Interrupt status/mask */
-+#define PCI_INTA	0x01	/* PCI INTA# is asserted */
-+#define PCI_INTB	0x02	/* PCI INTB# is asserted */
-+#define PCI_SERR	0x04	/* PCI SERR# has been asserted (write one to clear) */
-+#define PCI_PERR	0x08	/* PCI PERR# has been asserted (write one to clear) */
-+#define PCI_PME		0x10	/* PCI PME# is asserted */
-+
-+/* (General) PCI/SB mailbox interrupts, two bits per pci function */
-+#define	MAILBOX_F0_0	0x100	/* function 0, int 0 */
-+#define	MAILBOX_F0_1	0x200	/* function 0, int 1 */
-+#define	MAILBOX_F1_0	0x400	/* function 1, int 0 */
-+#define	MAILBOX_F1_1	0x800	/* function 1, int 1 */
-+#define	MAILBOX_F2_0	0x1000	/* function 2, int 0 */
-+#define	MAILBOX_F2_1	0x2000	/* function 2, int 1 */
-+#define	MAILBOX_F3_0	0x4000	/* function 3, int 0 */
-+#define	MAILBOX_F3_1	0x8000	/* function 3, int 1 */
-+
-+/* Sonics broadcast address */
-+#define BCAST_ADDR_MASK	0xff	/* Broadcast register address */
-+
-+/* Sonics to PCI translation types */
-+#define SBTOPCI0_MASK	0xfc000000
-+#define SBTOPCI1_MASK	0xfc000000
-+#define SBTOPCI2_MASK	0xc0000000
-+#define SBTOPCI_MEM	0
-+#define SBTOPCI_IO	1
-+#define SBTOPCI_CFG0	2
-+#define SBTOPCI_CFG1	3
-+#define	SBTOPCI_PREF	0x4		/* prefetch enable */
-+#define	SBTOPCI_BURST	0x8		/* burst enable */
-+#define	SBTOPCI_RC_MASK		0x30	/* read command (>= rev11) */
-+#define	SBTOPCI_RC_READ		0x00	/* memory read */
-+#define	SBTOPCI_RC_READLINE	0x10	/* memory read line */
-+#define	SBTOPCI_RC_READMULTI	0x20	/* memory read multiple */
-+
-+/* PCI core index in SROM shadow area */
-+#define SRSH_PI_OFFSET	0	/* first word */
-+#define SRSH_PI_MASK	0xf000	/* bit 15:12 */
-+#define SRSH_PI_SHIFT	12	/* bit 15:12 */
-+
-+#endif	/* _sbpci_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/sbpcie.h linux.dev/arch/mips/bcm947xx/include/sbpcie.h
---- linux.old/arch/mips/bcm947xx/include/sbpcie.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbpcie.h	2006-04-27 20:42:22.000000000 +0200
-@@ -0,0 +1,200 @@
-+/*
-+ * BCM43XX SiliconBackplane PCIE core hardware definitions.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbpcie.h,v 1.1.1.2 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef	_SBPCIE_H
-+#define	_SBPCIE_H
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif
-+
-+/* PCIE Enumeration space offsets */
-+#define  PCIE_CORE_CONFIG_OFFSET	0x0
-+#define  PCIE_FUNC0_CONFIG_OFFSET	0x400
-+#define  PCIE_FUNC1_CONFIG_OFFSET	0x500
-+#define  PCIE_FUNC2_CONFIG_OFFSET	0x600
-+#define  PCIE_FUNC3_CONFIG_OFFSET	0x700
-+#define  PCIE_SPROM_SHADOW_OFFSET	0x800
-+#define  PCIE_SBCONFIG_OFFSET		0xE00
-+
-+/* PCIE Bar0 Address Mapping. Each function maps 16KB config space */
-+#define PCIE_DEV_BAR0_SIZE		0x4000
-+#define PCIE_BAR0_WINMAPCORE_OFFSET	0x0
-+#define PCIE_BAR0_EXTSPROM_OFFSET	0x1000
-+#define PCIE_BAR0_PCIECORE_OFFSET	0x2000
-+#define PCIE_BAR0_CCCOREREG_OFFSET	0x3000
-+
-+/* SB side: PCIE core and host control registers */
-+typedef struct sbpcieregs {
-+	uint32 PAD[3];
-+	uint32 biststatus;	/* bist Status: 0x00C */
-+	uint32 PAD[6];
-+	uint32 sbtopcimailbox;	/* sb to pcie mailbox: 0x028 */
-+	uint32 PAD[54];
-+	uint32 sbtopcie0;	/* sb to pcie translation 0: 0x100 */
-+	uint32 sbtopcie1;	/* sb to pcie translation 1: 0x104 */
-+	uint32 sbtopcie2;	/* sb to pcie translation 2: 0x108 */
-+	uint32 PAD[4];
-+
-+	/* pcie core supports in direct access to config space */
-+	uint32 configaddr;	/* pcie config space access: Address field: 0x120 */
-+	uint32 configdata;	/* pcie config space access: Data field: 0x124 */
-+
-+	/* mdio access to serdes */
-+	uint32 mdiocontrol;	/* controls the mdio access: 0x128 */
-+	uint32 mdiodata;	/* Data to the mdio access: 0x12c */
-+
-+	/* pcie protocol phy/dllp/tlp register access mechanism */
-+	uint32 pcieaddr;	/* address of the internal registeru: 0x130 */
-+	uint32 pciedata;	/* Data to/from the internal regsiter: 0x134 */
-+
-+	uint32 PAD[434];
-+	uint16 sprom[36];	/* SPROM shadow Area */
-+} sbpcieregs_t;
-+
-+/* SB to PCIE translation masks */
-+#define SBTOPCIE0_MASK	0xfc000000
-+#define SBTOPCIE1_MASK	0xfc000000
-+#define SBTOPCIE2_MASK	0xc0000000
-+
-+/* Access type bits (0:1) */
-+#define SBTOPCIE_MEM	0
-+#define SBTOPCIE_IO	1
-+#define SBTOPCIE_CFG0	2
-+#define SBTOPCIE_CFG1	3
-+
-+/* Prefetch enable bit 2 */
-+#define SBTOPCIE_PF		4
-+
-+/* Write Burst enable for memory write bit 3 */
-+#define SBTOPCIE_WR_BURST	8
-+
-+/* config access */
-+#define CONFIGADDR_FUNC_MASK	0x7000
-+#define CONFIGADDR_FUNC_SHF	12
-+#define CONFIGADDR_REG_MASK	0x0FFF
-+#define CONFIGADDR_REG_SHF	0
-+
-+/* PCIE protocol regs Indirect Address */
-+#define PCIEADDR_PROT_MASK	0x300
-+#define PCIEADDR_PROT_SHF	8
-+#define PCIEADDR_PL_TLP		0
-+#define PCIEADDR_PL_DLLP	1
-+#define PCIEADDR_PL_PLP		2
-+
-+/* PCIE protocol PHY diagnostic registers */
-+#define	PCIE_PLP_MODEREG		0x200 /* Mode */
-+#define	PCIE_PLP_STATUSREG		0x204 /* Status */
-+#define PCIE_PLP_LTSSMCTRLREG		0x208 /* LTSSM control */
-+#define PCIE_PLP_LTLINKNUMREG		0x20c /* Link Training Link number */
-+#define PCIE_PLP_LTLANENUMREG		0x210 /* Link Training Lane number */
-+#define PCIE_PLP_LTNFTSREG		0x214 /* Link Training N_FTS */
-+#define PCIE_PLP_ATTNREG		0x218 /* Attention */
-+#define PCIE_PLP_ATTNMASKREG		0x21C /* Attention Mask */
-+#define PCIE_PLP_RXERRCTR		0x220 /* Rx Error */
-+#define PCIE_PLP_RXFRMERRCTR		0x224 /* Rx Framing Error */
-+#define PCIE_PLP_RXERRTHRESHREG		0x228 /* Rx Error threshold */
-+#define PCIE_PLP_TESTCTRLREG		0x22C /* Test Control reg */
-+#define PCIE_PLP_SERDESCTRLOVRDREG	0x230 /* SERDES Control Override */
-+#define PCIE_PLP_TIMINGOVRDREG		0x234 /* Timing param override */
-+#define PCIE_PLP_RXTXSMDIAGREG		0x238 /* RXTX State Machine Diag */
-+#define PCIE_PLP_LTSSMDIAGREG		0x23C /* LTSSM State Machine Diag */
-+
-+/* PCIE protocol DLLP diagnostic registers */
-+#define PCIE_DLLP_LCREG			0x100 /* Link Control */
-+#define PCIE_DLLP_LSREG			0x104 /* Link Status */
-+#define PCIE_DLLP_LAREG			0x108 /* Link Attention */
-+#define PCIE_DLLP_LAMASKREG		0x10C /* Link Attention Mask */
-+#define PCIE_DLLP_NEXTTXSEQNUMREG	0x110 /* Next Tx Seq Num */
-+#define PCIE_DLLP_ACKEDTXSEQNUMREG	0x114 /* Acked Tx Seq Num */
-+#define PCIE_DLLP_PURGEDTXSEQNUMREG	0x118 /* Purged Tx Seq Num */
-+#define PCIE_DLLP_RXSEQNUMREG		0x11C /* Rx Sequence Number */
-+#define PCIE_DLLP_LRREG			0x120 /* Link Replay */
-+#define PCIE_DLLP_LACKTOREG		0x124 /* Link Ack Timeout */
-+#define PCIE_DLLP_PMTHRESHREG		0x128 /* Power Management Threshold */
-+#define PCIE_DLLP_RTRYWPREG		0x12C /* Retry buffer write ptr */
-+#define PCIE_DLLP_RTRYRPREG		0x130 /* Retry buffer Read ptr */
-+#define PCIE_DLLP_RTRYPPREG		0x134 /* Retry buffer Purged ptr */
-+#define PCIE_DLLP_RTRRWREG		0x138 /* Retry buffer Read/Write */
-+#define PCIE_DLLP_ECTHRESHREG		0x13C /* Error Count Threshold */
-+#define PCIE_DLLP_TLPERRCTRREG		0x140 /* TLP Error Counter */
-+#define PCIE_DLLP_ERRCTRREG		0x144 /* Error Counter */
-+#define PCIE_DLLP_NAKRXCTRREG		0x148 /* NAK Received Counter */
-+#define PCIE_DLLP_TESTREG		0x14C /* Test */
-+#define PCIE_DLLP_PKTBIST		0x150 /* Packet BIST */
-+
-+/* PCIE protocol TLP diagnostic registers */
-+#define PCIE_TLP_CONFIGREG		0x000 /* Configuration */
-+#define PCIE_TLP_WORKAROUNDSREG		0x004 /* TLP Workarounds */
-+#define PCIE_TLP_WRDMAUPPER		0x010 /* Write DMA Upper Address */
-+#define PCIE_TLP_WRDMALOWER		0x014 /* Write DMA Lower Address */
-+#define PCIE_TLP_WRDMAREQ_LBEREG	0x018 /* Write DMA Len/ByteEn Req */
-+#define PCIE_TLP_RDDMAUPPER		0x01C /* Read DMA Upper Address */
-+#define PCIE_TLP_RDDMALOWER		0x020 /* Read DMA Lower Address */
-+#define PCIE_TLP_RDDMALENREG		0x024 /* Read DMA Len Req */
-+#define PCIE_TLP_MSIDMAUPPER		0x028 /* MSI DMA Upper Address */
-+#define PCIE_TLP_MSIDMALOWER		0x02C /* MSI DMA Lower Address */
-+#define PCIE_TLP_MSIDMALENREG		0x030 /* MSI DMA Len Req */
-+#define PCIE_TLP_SLVREQLENREG		0x034 /* Slave Request Len */
-+#define PCIE_TLP_FCINPUTSREQ		0x038 /* Flow Control Inputs */
-+#define PCIE_TLP_TXSMGRSREQ		0x03C /* Tx StateMachine and Gated Req */
-+#define PCIE_TLP_ADRACKCNTARBLEN	0x040 /* Address Ack XferCnt and ARB Len */
-+#define PCIE_TLP_DMACPLHDR0		0x044 /* DMA Completion Hdr 0 */
-+#define PCIE_TLP_DMACPLHDR1		0x048 /* DMA Completion Hdr 1 */
-+#define PCIE_TLP_DMACPLHDR2		0x04C /* DMA Completion Hdr 2 */
-+#define PCIE_TLP_DMACPLMISC0		0x050 /* DMA Completion Misc0 */
-+#define PCIE_TLP_DMACPLMISC1		0x054 /* DMA Completion Misc1 */
-+#define PCIE_TLP_DMACPLMISC2		0x058 /* DMA Completion Misc2 */
-+#define PCIE_TLP_SPTCTRLLEN		0x05C /* Split Controller Req len */
-+#define PCIE_TLP_SPTCTRLMSIC0		0x060 /* Split Controller Misc 0 */
-+#define PCIE_TLP_SPTCTRLMSIC1		0x064 /* Split Controller Misc 1 */
-+#define PCIE_TLP_BUSDEVFUNC		0x068 /* Bus/Device/Func */
-+#define PCIE_TLP_RESETCTR		0x06C /* Reset Counter */
-+#define PCIE_TLP_RTRYBUF		0x070 /* Retry Buffer value */
-+#define PCIE_TLP_TGTDEBUG1		0x074 /* Target Debug Reg1 */
-+#define PCIE_TLP_TGTDEBUG2		0x078 /* Target Debug Reg2 */
-+#define PCIE_TLP_TGTDEBUG3		0x07C /* Target Debug Reg3 */
-+#define PCIE_TLP_TGTDEBUG4		0x080 /* Target Debug Reg4 */
-+
-+/* MDIO control */
-+#define MDIOCTL_DIVISOR_MASK		0x7f	/* clock to be used on MDIO */
-+#define MDIOCTL_DIVISOR_VAL		0x2
-+#define MDIOCTL_PREAM_EN		0x80	/* Enable preamble sequnce */
-+#define MDIOCTL_ACCESS_DONE		0x100   /* Tranaction complete */
-+
-+/* MDIO Data */
-+#define MDIODATA_MASK			0x0000ffff	/* data 2 bytes */
-+#define MDIODATA_TA			0x00020000	/* Turnaround */
-+#define MDIODATA_REGADDR_SHF		18		/* Regaddr shift */
-+#define MDIODATA_REGADDR_MASK		0x003c0000	/* Regaddr Mask */
-+#define MDIODATA_DEVADDR_SHF		22		/* Physmedia devaddr shift */
-+#define MDIODATA_DEVADDR_MASK		0x0fc00000	/* Physmedia devaddr Mask */
-+#define MDIODATA_WRITE			0x10000000	/* write Transaction */
-+#define MDIODATA_READ			0x20000000	/* Read Transaction */
-+#define MDIODATA_START			0x40000000	/* start of Transaction */
-+
-+/* MDIO devices (SERDES modules) */
-+#define MDIODATA_DEV_PLL       		0x1d	/* SERDES PLL Dev */
-+#define MDIODATA_DEV_TX        		0x1e	/* SERDES TX Dev */
-+#define MDIODATA_DEV_RX        		0x1f	/* SERDES RX Dev */
-+
-+/* SERDES registers */
-+#define SERDES_RX_TIMER1		2	/* Rx Timer1 */
-+#define SERDES_RX_CDR			6	/* CDR */
-+#define SERDES_RX_CDRBW			7	/* CDR BW */
-+
-+#endif	/* _SBPCIE_H */
-diff -urN linux.old/arch/mips/bcm947xx/include/sbpcmcia.h linux.dev/arch/mips/bcm947xx/include/sbpcmcia.h
---- linux.old/arch/mips/bcm947xx/include/sbpcmcia.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbpcmcia.h	2006-04-27 20:29:47.000000000 +0200
-@@ -0,0 +1,147 @@
-+/*
-+ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbpcmcia.h,v 1.1.1.9 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef	_SBPCMCIA_H
-+#define	_SBPCMCIA_H
-+
-+
-+/* All the addresses that are offsets in attribute space are divided
-+ * by two to account for the fact that odd bytes are invalid in
-+ * attribute space and our read/write routines make the space appear
-+ * as if they didn't exist. Still we want to show the original numbers
-+ * as documented in the hnd_pcmcia core manual.
-+ */
-+
-+/* PCMCIA Function Configuration Registers */
-+#define	PCMCIA_FCR		(0x700 / 2)
-+
-+#define	FCR0_OFF		0
-+#define	FCR1_OFF		(0x40 / 2)
-+#define	FCR2_OFF		(0x80 / 2)
-+#define	FCR3_OFF		(0xc0 / 2)
-+
-+#define	PCMCIA_FCR0		(0x700 / 2)
-+#define	PCMCIA_FCR1		(0x740 / 2)
-+#define	PCMCIA_FCR2		(0x780 / 2)
-+#define	PCMCIA_FCR3		(0x7c0 / 2)
-+
-+/* Standard PCMCIA FCR registers */
-+
-+#define	PCMCIA_COR		0
-+
-+#define	COR_RST			0x80
-+#define	COR_LEV			0x40
-+#define	COR_IRQEN		0x04
-+#define	COR_BLREN		0x01
-+#define	COR_FUNEN		0x01
-+
-+
-+#define	PCICIA_FCSR		(2 / 2)
-+#define	PCICIA_PRR		(4 / 2)
-+#define	PCICIA_SCR		(6 / 2)
-+#define	PCICIA_ESR		(8 / 2)
-+
-+
-+#define PCM_MEMOFF		0x0000
-+#define F0_MEMOFF		0x1000
-+#define F1_MEMOFF		0x2000
-+#define F2_MEMOFF		0x3000
-+#define F3_MEMOFF		0x4000
-+
-+/* Memory base in the function fcr's */
-+#define MEM_ADDR0		(0x728 / 2)
-+#define MEM_ADDR1		(0x72a / 2)
-+#define MEM_ADDR2		(0x72c / 2)
-+
-+/* PCMCIA base plus Srom access in fcr0: */
-+#define PCMCIA_ADDR0		(0x072e / 2)
-+#define PCMCIA_ADDR1		(0x0730 / 2)
-+#define PCMCIA_ADDR2		(0x0732 / 2)
-+
-+#define MEM_SEG			(0x0734 / 2)
-+#define SROM_CS			(0x0736 / 2)
-+#define SROM_DATAL		(0x0738 / 2)
-+#define SROM_DATAH		(0x073a / 2)
-+#define SROM_ADDRL		(0x073c / 2)
-+#define SROM_ADDRH		(0x073e / 2)
-+
-+/*  Values for srom_cs: */
-+#define SROM_IDLE		0
-+#define SROM_WRITE		1
-+#define SROM_READ		2
-+#define SROM_WEN		4
-+#define SROM_WDS		7
-+#define SROM_DONE		8
-+
-+/* CIS stuff */
-+
-+/* The CIS stops where the FCRs start */
-+#define	CIS_SIZE		PCMCIA_FCR
-+
-+/* Standard tuples we know about */
-+
-+#define	CISTPL_MANFID		0x20		/* Manufacturer and device id */
-+#define	CISTPL_FUNCE		0x22		/* Function extensions */
-+#define	CISTPL_CFTABLE		0x1b		/* Config table entry */
-+
-+/* Function extensions for LANs */
-+
-+#define	LAN_TECH		1		/* Technology type */
-+#define	LAN_SPEED		2		/* Raw bit rate */
-+#define	LAN_MEDIA		3		/* Transmission media */
-+#define	LAN_NID			4		/* Node identification (aka MAC addr) */
-+#define	LAN_CONN		5		/* Connector standard */
-+
-+
-+/* CFTable */
-+#define CFTABLE_REGWIN_2K	0x08		/* 2k reg windows size */
-+#define CFTABLE_REGWIN_4K	0x10		/* 4k reg windows size */
-+#define CFTABLE_REGWIN_8K	0x20		/* 8k reg windows size */
-+
-+/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll
-+ * take one for HNBU, and use "extensions" (a la FUNCE) within it.
-+ */
-+
-+#define	CISTPL_BRCM_HNBU	0x80
-+
-+/* Subtypes of BRCM_HNBU: */
-+
-+#define HNBU_SROMREV		0x00		/* A byte with sromrev, 1 if not present */
-+#define HNBU_CHIPID		0x01		/* Two 16bit values: PCI vendor & device id */
-+#define HNBU_BOARDREV		0x02		/* One byte board revision */
-+#define HNBU_PAPARMS		0x03		/* PA parameters: 8 (sromrev == 1)
-+						 * or 9 (sromrev > 1) bytes
-+						 */
-+#define HNBU_OEM		0x04		/* Eight bytes OEM data (sromrev == 1) */
-+#define HNBU_CC			0x05		/* Default country code (sromrev == 1) */
-+#define	HNBU_AA			0x06		/* Antennas available */
-+#define	HNBU_AG			0x07		/* Antenna gain */
-+#define HNBU_BOARDFLAGS		0x08		/* board flags (2 or 4 bytes) */
-+#define HNBU_LEDS		0x09		/* LED set */
-+#define HNBU_CCODE		0x0a		/* Country code (2 bytes ascii + 1 byte cctl)
-+						 * in rev 2
-+						 */
-+#define HNBU_CCKPO		0x0b		/* 2 byte cck power offsets in rev 3 */
-+#define HNBU_OFDMPO		0x0c		/* 4 byte 11g ofdm power offsets in rev 3 */
-+#define HNBU_GPIOTIMER		0x0d		/* 2 bytes with on/off values in rev 3 */
-+
-+
-+/* sbtmstatelow */
-+#define SBTML_INT_ACK		0x40000		/* ack the sb interrupt */
-+#define SBTML_INT_EN		0x20000		/* enable sb interrupt */
-+
-+/* sbtmstatehigh */
-+#define SBTMH_INT_STATUS	0x40000		/* sb interrupt status */
-+
-+#endif	/* _SBPCMCIA_H */
-diff -urN linux.old/arch/mips/bcm947xx/include/sbsdram.h linux.dev/arch/mips/bcm947xx/include/sbsdram.h
---- linux.old/arch/mips/bcm947xx/include/sbsdram.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbsdram.h	2006-04-27 20:36:08.000000000 +0200
-@@ -0,0 +1,85 @@
-+/*
-+ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbsdram.h,v 1.1.1.9 2006/03/02 13:03:52 honor Exp $
-+ */
-+
-+#ifndef	_SBSDRAM_H
-+#define	_SBSDRAM_H
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+/* Sonics side: SDRAM core registers */
-+typedef volatile struct sbsdramregs {
-+	uint32	initcontrol;	/* Generates external SDRAM initialization sequence */
-+	uint32	config;		/* Initializes external SDRAM mode register */
-+	uint32	refresh;	/* Controls external SDRAM refresh rate */
-+	uint32	pad1;
-+	uint32	pad2;
-+} sbsdramregs_t;
-+
-+/* SDRAM simulation */
-+#ifdef RAMSZ
-+#define	SDRAMSZ		RAMSZ
-+#else
-+#define SDRAMSZ		(4 * 1024 * 1024)
-+#endif
-+
-+extern uchar sdrambuf[SDRAMSZ];
-+
-+#endif /* _LANGUAGE_ASSEMBLY */
-+
-+/* SDRAM initialization control (initcontrol) register bits */
-+#define SDRAM_CBR	0x0001	/* Writing 1 generates refresh cycle and toggles bit */
-+#define SDRAM_PRE	0x0002	/* Writing 1 generates precharge cycle and toggles bit */
-+#define SDRAM_MRS	0x0004	/* Writing 1 generates mode register select cycle and toggles bit */
-+#define SDRAM_EN	0x0008	/* When set, enables access to SDRAM */
-+#define SDRAM_16Mb	0x0000	/* Use 16 Megabit SDRAM */
-+#define SDRAM_64Mb	0x0010	/* Use 64 Megabit SDRAM */
-+#define SDRAM_128Mb	0x0020	/* Use 128 Megabit SDRAM */
-+#define SDRAM_RSVMb	0x0030	/* Use special SDRAM */
-+#define SDRAM_RST	0x0080	/* Writing 1 causes soft reset of controller */
-+#define SDRAM_SELFREF	0x0100	/* Writing 1 enables self refresh mode */
-+#define SDRAM_PWRDOWN	0x0200	/* Writing 1 causes controller to power down */
-+#define SDRAM_32BIT	0x0400	/* When set, indicates 32 bit SDRAM interface */
-+#define SDRAM_9BITCOL	0x0800	/* When set, indicates 9 bit column */
-+
-+/* SDRAM configuration (config) register bits */
-+#define SDRAM_BURSTFULL	0x0000	/* Use full page bursts */
-+#define SDRAM_BURST8	0x0001	/* Use burst of 8 */
-+#define SDRAM_BURST4	0x0002	/* Use burst of 4 */
-+#define SDRAM_BURST2	0x0003	/* Use burst of 2 */
-+#define SDRAM_CAS3	0x0000	/* Use CAS latency of 3 */
-+#define SDRAM_CAS2	0x0004	/* Use CAS latency of 2 */
-+
-+/* SDRAM refresh control (refresh) register bits */
-+#define SDRAM_REF(p)	(((p)&0xff) | SDRAM_REF_EN)	/* Refresh period */
-+#define SDRAM_REF_EN	0x8000		/* Writing 1 enables periodic refresh */
-+
-+/* SDRAM Core default Init values (OCP ID 0x803) */
-+#define SDRAM_INIT	MEM4MX16X2
-+#define SDRAM_CONFIG    SDRAM_BURSTFULL
-+#define SDRAM_REFRESH   SDRAM_REF(0x40)
-+
-+#define MEM1MX16	0x009	/* 2 MB */
-+#define MEM1MX16X2	0x409	/* 4 MB */
-+#define MEM2MX8X2	0x809	/* 4 MB */
-+#define MEM2MX8X4	0xc09	/* 8 MB */
-+#define MEM2MX32	0x439	/* 8 MB */
-+#define MEM4MX16	0x019	/* 8 MB */
-+#define MEM4MX16X2	0x419	/* 16 MB */
-+#define MEM8MX8X2	0x819	/* 16 MB */
-+#define MEM8MX16	0x829	/* 16 MB */
-+#define MEM4MX32	0x429	/* 16 MB */
-+#define MEM8MX8X4	0xc19	/* 32 MB */
-+#define MEM8MX16X2	0xc29	/* 32 MB */
-+
-+#endif	/* _SBSDRAM_H */
-diff -urN linux.old/arch/mips/bcm947xx/include/sbsocram.h linux.dev/arch/mips/bcm947xx/include/sbsocram.h
---- linux.old/arch/mips/bcm947xx/include/sbsocram.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbsocram.h	2006-04-27 22:13:19.000000000 +0200
-@@ -0,0 +1,64 @@
-+/*
-+ * BCM47XX Sonics SiliconBackplane embedded ram core
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbsocram.h,v 1.1.1.3 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef	_SBSOCRAM_H
-+#define	_SBSOCRAM_H
-+
-+#define	SR_COREINFO		0x00
-+#define	SR_BWALLOC		0x04
-+#define	SR_BISTSTAT		0x0c
-+#define	SR_BANKINDEX		0x10
-+#define	SR_BANKSTBYCTL		0x14
-+
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+/* Memcsocram core registers */
-+typedef volatile struct sbsocramregs {
-+	uint32	coreinfo;
-+	uint32	bwalloc;
-+	uint32	PAD;
-+	uint32	biststat;
-+	uint32	bankidx;
-+	uint32	standbyctrl;
-+} sbsocramregs_t;
-+
-+#endif
-+
-+/* Coreinfo register */
-+#define	SRCI_PT_MASK		0x30000
-+#define	SRCI_PT_SHIFT		16
-+
-+/* In corerev 0, the memory size is 2 to the power of the
-+ * base plus 16 plus to the contents of the memsize field plus 1.
-+ */
-+#define	SRCI_MS0_MASK		0xf
-+#define SR_MS0_BASE		16
-+
-+/*
-+ * In corerev 1 the bank size is 2 ^ the bank size field plus 14,
-+ * the memory size is number of banks times bank size.
-+ * The same applies to rom size.
-+ */
-+#define	SRCI_ROMNB_MASK		0xf000
-+#define	SRCI_ROMNB_SHIFT	12
-+#define	SRCI_ROMBSZ_MASK	0xf00
-+#define	SRCI_ROMBSZ_SHIFT	8
-+#define	SRCI_SRNB_MASK		0xf0
-+#define	SRCI_SRNB_SHIFT		4
-+#define	SRCI_SRBSZ_MASK		0xf
-+#define	SRCI_SRBSZ_SHIFT	0
-+
-+#define SR_BSZ_BASE		14
-+#endif	/* _SBSOCRAM_H */
-diff -urN linux.old/arch/mips/bcm947xx/include/sbutils.h linux.dev/arch/mips/bcm947xx/include/sbutils.h
---- linux.old/arch/mips/bcm947xx/include/sbutils.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbutils.h	2006-04-27 23:09:25.000000000 +0200
-@@ -0,0 +1,150 @@
-+/*
-+ * Misc utility routines for accessing chip-specific features
-+ * of Broadcom HNBU SiliconBackplane-based chips.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbutils.h,v 1.4 2006/04/08 07:12:42 honor Exp $
-+ */
-+
-+#ifndef	_sbutils_h_
-+#define	_sbutils_h_
-+
-+/* 
-+ * Datastructure to export all chip specific common variables
-+ * public (read-only) portion of sbutils handle returned by
-+ * sb_attach()/sb_kattach()
-+*/
-+
-+struct sb_pub {
-+
-+	uint	bustype;		/* SB_BUS, PCI_BUS  */
-+	uint	buscoretype;		/* SB_PCI, SB_PCMCIA, SB_PCIE */
-+	uint	buscorerev;		/* buscore rev */
-+	uint	buscoreidx;		/* buscore index */
-+	int	ccrev;			/* chip common core rev */
-+	uint	boardtype;		/* board type */
-+	uint	boardvendor;		/* board vendor */
-+	uint	chip;			/* chip number */
-+	uint	chiprev;		/* chip revision */
-+	uint	chippkg;		/* chip package option */
-+	uint    sonicsrev;		/* sonics backplane rev */
-+};
-+
-+typedef const struct sb_pub  sb_t;
-+
-+/*
-+ * Many of the routines below take an 'sbh' handle as their first arg.
-+ * Allocate this by calling sb_attach().  Free it by calling sb_detach().
-+ * At any one time, the sbh is logically focused on one particular sb core
-+ * (the "current core").
-+ * Use sb_setcore() or sb_setcoreidx() to change the association to another core.
-+ */
-+
-+#define	SB_OSH		NULL	/* Use for sb_kattach when no osh is available */
-+/* exported externs */
-+extern sb_t *sb_attach(uint pcidev, osl_t *osh, void *regs, uint bustype,
-+                       void *sdh, char **vars, uint *varsz);
-+extern sb_t *sb_kattach(void);
-+extern void sb_detach(sb_t *sbh);
-+extern uint sb_chip(sb_t *sbh);
-+extern uint sb_chiprev(sb_t *sbh);
-+extern uint sb_chipcrev(sb_t *sbh);
-+extern uint sb_chippkg(sb_t *sbh);
-+extern uint sb_pcirev(sb_t *sbh);
-+extern bool sb_war16165(sb_t *sbh);
-+extern uint sb_pcmciarev(sb_t *sbh);
-+extern uint sb_boardvendor(sb_t *sbh);
-+extern uint sb_boardtype(sb_t *sbh);
-+extern uint sb_bus(sb_t *sbh);
-+extern uint sb_buscoretype(sb_t *sbh);
-+extern uint sb_buscorerev(sb_t *sbh);
-+extern uint sb_corelist(sb_t *sbh, uint coreid[]);
-+extern uint sb_coreid(sb_t *sbh);
-+extern uint sb_coreidx(sb_t *sbh);
-+extern uint sb_coreunit(sb_t *sbh);
-+extern uint sb_corevendor(sb_t *sbh);
-+extern uint sb_corerev(sb_t *sbh);
-+extern void *sb_osh(sb_t *sbh);
-+extern void sb_setosh(sb_t *sbh, osl_t *osh);
-+extern void *sb_coreregs(sb_t *sbh);
-+extern uint32 sb_coreflags(sb_t *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val);
-+extern bool sb_iscoreup(sb_t *sbh);
-+extern void *sb_setcoreidx(sb_t *sbh, uint coreidx);
-+extern void *sb_setcore(sb_t *sbh, uint coreid, uint coreunit);
-+extern int sb_corebist(sb_t *sbh);
-+extern void sb_commit(sb_t *sbh);
-+extern uint32 sb_base(uint32 admatch);
-+extern uint32 sb_size(uint32 admatch);
-+extern void sb_core_reset(sb_t *sbh, uint32 bits, uint32 resetbits);
-+extern void sb_core_tofixup(sb_t *sbh);
-+extern void sb_core_disable(sb_t *sbh, uint32 bits);
-+extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m);
-+extern uint32 sb_clock(sb_t *sbh);
-+extern void sb_pci_setup(sb_t *sbh, uint coremask);
-+extern void sb_pcmcia_init(sb_t *sbh);
-+extern void sb_watchdog(sb_t *sbh, uint ticks);
-+extern void *sb_gpiosetcore(sb_t *sbh);
-+extern uint32 sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-+extern uint32 sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-+extern uint32 sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-+extern uint32 sb_gpioin(sb_t *sbh);
-+extern uint32 sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-+extern uint32 sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-+extern uint32 sb_gpioled(sb_t *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_gpioreserve(sb_t *sbh, uint32 gpio_num, uint8 priority);
-+extern uint32 sb_gpiorelease(sb_t *sbh, uint32 gpio_num, uint8 priority);
-+
-+extern void sb_clkctl_init(sb_t *sbh);
-+extern uint16 sb_clkctl_fast_pwrup_delay(sb_t *sbh);
-+extern bool sb_clkctl_clk(sb_t *sbh, uint mode);
-+extern int sb_clkctl_xtal(sb_t *sbh, uint what, bool on);
-+extern void sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn,
-+                                      void *intrsenabled_fn, void *intr_arg);
-+extern uint32 sb_set_initiator_to(sb_t *sbh, uint32 to);
-+extern int sb_corepciid(sb_t *sbh, uint func, uint16 *pcivendor, uint16 *pcidevice,
-+                        uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif,
-+                        uint8 *pciheader);
-+extern uint sb_pcie_readreg(void *sbh, void* arg1, uint offset);
-+extern uint sb_pcie_writereg(sb_t *sbh, void *arg1,  uint offset, uint val);
-+extern uint32 sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 val);
-+extern bool sb_backplane64(sb_t *sbh);
-+extern void sb_btcgpiowar(sb_t *sbh);
-+
-+
-+
-+
-+extern bool sb_deviceremoved(sb_t *sbh);
-+extern uint32 sb_socram_size(sb_t *sbh);
-+
-+/*
-+* Build device path. Path size must be >= SB_DEVPATH_BUFSZ.
-+* The returned path is NULL terminated and has trailing '/'.
-+* Return 0 on success, nonzero otherwise.
-+*/
-+extern int sb_devpath(sb_t *sbh, char *path, int size);
-+
-+/* clkctl xtal what flags */
-+#define	XTAL			0x1		/* primary crystal oscillator (2050) */
-+#define	PLL			0x2		/* main chip pll */
-+
-+/* clkctl clk mode */
-+#define	CLK_FAST		0		/* force fast (pll) clock */
-+#define	CLK_DYNAMIC		2		/* enable dynamic clock control */
-+
-+
-+/* GPIO usage priorities */
-+#define GPIO_DRV_PRIORITY	0		/* Driver */
-+#define GPIO_APP_PRIORITY	1		/* Application */
-+
-+/* device path */
-+#define SB_DEVPATH_BUFSZ	16		/* min buffer size in bytes */
-+
-+#endif	/* _sbutils_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/sflash.h linux.dev/arch/mips/bcm947xx/include/sflash.h
---- linux.old/arch/mips/bcm947xx/include/sflash.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sflash.h	2006-04-27 22:13:51.000000000 +0200
-@@ -0,0 +1,36 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sflash.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef _sflash_h_
-+#define _sflash_h_
-+
-+#include <typedefs.h>
-+#include <sbchipc.h>
-+
-+struct sflash {
-+	uint blocksize;		/* Block size */
-+	uint numblocks;		/* Number of blocks */
-+	uint32 type;		/* Type */
-+	uint size;		/* Total size in bytes */
-+};
-+
-+/* Utility functions */
-+extern int sflash_poll(chipcregs_t *cc, uint offset);
-+extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf);
-+extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf);
-+extern int sflash_erase(chipcregs_t *cc, uint offset);
-+extern int sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf);
-+extern struct sflash * sflash_init(chipcregs_t *cc);
-+
-+#endif /* _sflash_h_ */
-diff -urN linux.old/arch/mips/bcm947xx/include/trxhdr.h linux.dev/arch/mips/bcm947xx/include/trxhdr.h
---- linux.old/arch/mips/bcm947xx/include/trxhdr.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/trxhdr.h	2006-04-27 19:24:19.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * TRX image file header format.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */ 
-+
-+#include <typedefs.h>
-+
-+#define TRX_MAGIC	0x30524448	/* "HDR0" */
-+#define TRX_VERSION	1
-+#define TRX_MAX_LEN	0x3A0000
-+#define TRX_NO_HEADER	1		/* Do not write TRX header */	
-+#define TRX_GZ_FILES	0x2     /* Contains up to TRX_MAX_OFFSET individual gzip files */
-+#define TRX_MAX_OFFSET	3
-+
-+struct trx_header {
-+	uint32 magic;		/* "HDR0" */
-+	uint32 len;		/* Length of file including header */
-+	uint32 crc32;		/* 32-bit CRC from flag_version to end of file */
-+	uint32 flag_version;	/* 0:15 flags, 16:31 version */
-+	uint32 offsets[TRX_MAX_OFFSET];	/* Offsets of partitions from start of header */
-+};
-+
-+/* Compatibility */
-+typedef struct trx_header TRXHDR, *PTRXHDR;
-diff -urN linux.old/arch/mips/bcm947xx/include/typedefs.h linux.dev/arch/mips/bcm947xx/include/typedefs.h
---- linux.old/arch/mips/bcm947xx/include/typedefs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/typedefs.h	2006-04-27 23:47:30.000000000 +0200
-@@ -0,0 +1,361 @@
-+/*
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: typedefs.h,v 1.1.1.12 2006/04/08 06:13:40 honor Exp $
-+ */
-+
-+#ifndef _TYPEDEFS_H_
-+#define _TYPEDEFS_H_
-+
-+
-+/* Define 'SITE_TYPEDEFS' in the compile to include a site specific
-+ * typedef file "site_typedefs.h".
-+ *
-+ * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs"
-+ * section of this file makes inferences about the compile environment
-+ * based on defined symbols and possibly compiler pragmas.
-+ *
-+ * Following these two sections is the "Default Typedefs"
-+ * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is
-+ * defined. This section has a default set of typedefs and a few
-+ * proprocessor symbols (TRUE, FALSE, NULL, ...).
-+ */
-+
-+#ifdef SITE_TYPEDEFS
-+
-+/*
-+ * Site Specific Typedefs
-+ *
-+ */
-+
-+#include "site_typedefs.h"
-+
-+#else
-+
-+/*
-+ * Inferred Typedefs
-+ *
-+ */
-+
-+/* Infer the compile environment based on preprocessor symbols and pramas.
-+ * Override type definitions as needed, and include configuration dependent
-+ * header files to define types.
-+ */
-+
-+#ifdef __cplusplus
-+
-+#define TYPEDEF_BOOL
-+#ifndef FALSE
-+#define FALSE	false
-+#endif
-+#ifndef TRUE
-+#define TRUE	true
-+#endif
-+
-+#else	/* ! __cplusplus */
-+
-+#if defined(_WIN32)
-+
-+#define TYPEDEF_BOOL
-+typedef	unsigned char	bool;			/* consistent w/BOOL */
-+
-+#endif /* _WIN32 */
-+
-+#endif	/* ! __cplusplus */
-+
-+/* use the Windows ULONG_PTR type when compiling for 64 bit */
-+#if defined(_WIN64)
-+#include <basetsd.h>
-+#define TYPEDEF_UINTPTR
-+typedef ULONG_PTR	uintptr;
-+#endif
-+
-+
-+#if defined(_MINOSL_)
-+#define _NEED_SIZE_T_
-+#endif
-+
-+#if defined(_NEED_SIZE_T_)
-+typedef long unsigned int size_t;
-+#endif
-+
-+#ifdef __DJGPP__
-+typedef long unsigned int size_t;
-+#endif /* __DJGPP__ */
-+
-+#ifdef _MSC_VER	    /* Microsoft C */
-+#define TYPEDEF_INT64
-+#define TYPEDEF_UINT64
-+typedef signed __int64	int64;
-+typedef unsigned __int64 uint64;
-+#endif
-+
-+#if defined(MACOSX)
-+#define TYPEDEF_BOOL
-+#endif
-+
-+#if defined(__NetBSD__)
-+#define TYPEDEF_ULONG
-+#endif
-+
-+
-+#if defined(linux)
-+#define TYPEDEF_UINT
-+#define TYPEDEF_USHORT
-+#define TYPEDEF_ULONG
-+#endif
-+
-+#if !defined(linux) && !defined(_WIN32) && !defined(_CFE_) && \
-+	!defined(_HNDRTE_) && !defined(_MINOSL_) && !defined(__DJGPP__)
-+#define TYPEDEF_UINT
-+#define TYPEDEF_USHORT
-+#endif
-+
-+
-+/* Do not support the (u)int64 types with strict ansi for GNU C */
-+#if defined(__GNUC__) && defined(__STRICT_ANSI__)
-+#define TYPEDEF_INT64
-+#define TYPEDEF_UINT64
-+#endif
-+
-+/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode
-+ * for singned or unsigned
-+ */
-+#if defined(__ICL)
-+
-+#define TYPEDEF_INT64
-+
-+#if defined(__STDC__)
-+#define TYPEDEF_UINT64
-+#endif
-+
-+#endif /* __ICL */
-+
-+#if !defined(_WIN32) && !defined(_CFE_) && !defined(_MINOSL_) && \
-+	!defined(__DJGPP__)
-+
-+/* pick up ushort & uint from standard types.h */
-+#if defined(linux) && defined(__KERNEL__)
-+
-+#include <linux/types.h>	/* sys/types.h and linux/types.h are oil and water */
-+
-+#else
-+
-+#include <sys/types.h>
-+
-+#endif
-+
-+#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_  && !_MINOSL_ && !__DJGPP__ */
-+
-+#if defined(MACOSX)
-+
-+#ifdef __BIG_ENDIAN__
-+#define IL_BIGENDIAN
-+#else
-+#ifdef IL_BIGENDIAN
-+#error "IL_BIGENDIAN was defined for a little-endian compile"
-+#endif
-+#endif /* __BIG_ENDIAN__ */
-+
-+#if !defined(__cplusplus)
-+
-+#if defined(__i386__)
-+typedef unsigned char bool;
-+#else
-+typedef unsigned int bool;
-+#endif
-+#define TYPE_BOOL 1
-+enum {
-+    false	= 0,
-+    true	= 1
-+};
-+
-+#if defined(KERNEL)
-+#include <IOKit/IOTypes.h>
-+#endif /* KERNEL */
-+
-+#endif /* __cplusplus */
-+
-+#endif /* MACOSX */
-+
-+
-+/* use the default typedefs in the next section of this file */
-+#define USE_TYPEDEF_DEFAULTS
-+
-+#endif /* SITE_TYPEDEFS */
-+
-+
-+/*
-+ * Default Typedefs
-+ *
-+ */
-+
-+#ifdef USE_TYPEDEF_DEFAULTS
-+#undef USE_TYPEDEF_DEFAULTS
-+
-+#ifndef TYPEDEF_BOOL
-+typedef	/* @abstract@ */ unsigned char	bool;
-+#endif
-+
-+/* define uchar, ushort, uint, ulong */
-+
-+#ifndef TYPEDEF_UCHAR
-+typedef unsigned char	uchar;
-+#endif
-+
-+#ifndef TYPEDEF_USHORT
-+typedef unsigned short	ushort;
-+#endif
-+
-+#ifndef TYPEDEF_UINT
-+typedef unsigned int	uint;
-+#endif
-+
-+#ifndef TYPEDEF_ULONG
-+typedef unsigned long	ulong;
-+#endif
-+
-+/* define [u]int8/16/32/64, uintptr */
-+
-+#ifndef TYPEDEF_UINT8
-+typedef unsigned char	uint8;
-+#endif
-+
-+#ifndef TYPEDEF_UINT16
-+typedef unsigned short	uint16;
-+#endif
-+
-+#ifndef TYPEDEF_UINT32
-+typedef unsigned int	uint32;
-+#endif
-+
-+#ifndef TYPEDEF_UINT64
-+typedef unsigned long long uint64;
-+#endif
-+
-+#ifndef TYPEDEF_UINTPTR
-+typedef unsigned int	uintptr;
-+#endif
-+
-+#ifndef TYPEDEF_INT8
-+typedef signed char	int8;
-+#endif
-+
-+#ifndef TYPEDEF_INT16
-+typedef signed short	int16;
-+#endif
-+
-+#ifndef TYPEDEF_INT32
-+typedef signed int	int32;
-+#endif
-+
-+#ifndef TYPEDEF_INT64
-+typedef signed long long int64;
-+#endif
-+
-+/* define float32/64, float_t */
-+
-+#ifndef TYPEDEF_FLOAT32
-+typedef float		float32;
-+#endif
-+
-+#ifndef TYPEDEF_FLOAT64
-+typedef double		float64;
-+#endif
-+
-+/*
-+ * abstracted floating point type allows for compile time selection of
-+ * single or double precision arithmetic.  Compiling with -DFLOAT32
-+ * selects single precision; the default is double precision.
-+ */
-+
-+#ifndef TYPEDEF_FLOAT_T
-+
-+#if defined(FLOAT32)
-+typedef float32 float_t;
-+#else /* default to double precision floating point */
-+typedef float64 float_t;
-+#endif
-+
-+#endif /* TYPEDEF_FLOAT_T */
-+
-+/* define macro values */
-+
-+#ifndef FALSE
-+#define FALSE	0
-+#endif
-+
-+#ifndef TRUE
-+#define TRUE	1  /* TRUE */
-+#endif
-+
-+#ifndef NULL
-+#define	NULL	0
-+#endif
-+
-+#ifndef OFF
-+#define	OFF	0
-+#endif
-+
-+#ifndef ON
-+#define	ON	1  /* ON = 1 */
-+#endif
-+
-+#define	AUTO	(-1) /* Auto = -1 */
-+
-+/* define PTRSZ, INLINE */
-+
-+#ifndef PTRSZ
-+#define	PTRSZ	sizeof(char*)
-+#endif
-+
-+#ifndef INLINE
-+
-+#ifdef _MSC_VER
-+
-+#define INLINE __inline
-+
-+#elif __GNUC__
-+
-+#define INLINE __inline__
-+
-+#else
-+
-+#define INLINE
-+
-+#endif /* _MSC_VER */
-+
-+#endif /* INLINE */
-+
-+#undef TYPEDEF_BOOL
-+#undef TYPEDEF_UCHAR
-+#undef TYPEDEF_USHORT
-+#undef TYPEDEF_UINT
-+#undef TYPEDEF_ULONG
-+#undef TYPEDEF_UINT8
-+#undef TYPEDEF_UINT16
-+#undef TYPEDEF_UINT32
-+#undef TYPEDEF_UINT64
-+#undef TYPEDEF_UINTPTR
-+#undef TYPEDEF_INT8
-+#undef TYPEDEF_INT16
-+#undef TYPEDEF_INT32
-+#undef TYPEDEF_INT64
-+#undef TYPEDEF_FLOAT32
-+#undef TYPEDEF_FLOAT64
-+#undef TYPEDEF_FLOAT_T
-+
-+#endif /* USE_TYPEDEF_DEFAULTS */
-+
-+/* 
-+ * Including the bcmdefs.h here, to make sure everyone including typedefs.h 
-+ * gets this automatically 
-+*/
-+#include "bcmdefs.h"
-+
-+#endif /* _TYPEDEFS_H_ */
-diff -urN linux.old/arch/mips/bcm947xx/nvram.c linux.dev/arch/mips/bcm947xx/nvram.c
---- linux.old/arch/mips/bcm947xx/nvram.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/nvram.c	2006-04-27 23:11:58.000000000 +0200
-@@ -0,0 +1,315 @@
-+/*
-+ * NVRAM variable manipulation (common)
-+ *
-+ * Copyright 2004, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ */
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmendian.h>
-+#include <bcmnvram.h>
-+#include <bcmutils.h>
-+#include <sbsdram.h>
-+
-+extern struct nvram_tuple * BCMINIT(_nvram_realloc)(struct nvram_tuple *t, const char *name, const char *value);
-+extern void BCMINIT(_nvram_free)(struct nvram_tuple *t);
-+extern int BCMINIT(_nvram_read)(void *buf);
-+
-+char * BCMINIT(_nvram_get)(const char *name);
-+int BCMINIT(_nvram_set)(const char *name, const char *value);
-+int BCMINIT(_nvram_unset)(const char *name);
-+int BCMINIT(_nvram_getall)(char *buf, int count);
-+int BCMINIT(_nvram_commit)(struct nvram_header *header);
-+int BCMINIT(_nvram_init)(void);
-+void BCMINIT(_nvram_exit)(void);
-+
-+static struct nvram_tuple * BCMINITDATA(nvram_hash)[257];
-+static struct nvram_tuple * nvram_dead;
-+
-+/* Free all tuples. Should be locked. */
-+static void  
-+BCMINITFN(nvram_free)(void)
-+{
-+	uint i;
-+	struct nvram_tuple *t, *next;
-+
-+	/* Free hash table */
-+	for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) {
-+		for (t = BCMINIT(nvram_hash)[i]; t; t = next) {
-+			next = t->next;
-+			BCMINIT(_nvram_free)(t);
-+		}
-+		BCMINIT(nvram_hash)[i] = NULL;
-+	}
-+
-+	/* Free dead table */
-+	for (t = nvram_dead; t; t = next) {
-+		next = t->next;
-+		BCMINIT(_nvram_free)(t);
-+	}
-+	nvram_dead = NULL;
-+
-+	/* Indicate to per-port code that all tuples have been freed */
-+	BCMINIT(_nvram_free)(NULL);
-+}
-+
-+/* String hash */
-+static INLINE uint
-+hash(const char *s)
-+{
-+	uint hash = 0;
-+
-+	while (*s)
-+		hash = 31 * hash + *s++;
-+
-+	return hash;
-+}
-+
-+/* (Re)initialize the hash table. Should be locked. */
-+static int 
-+BCMINITFN(nvram_rehash)(struct nvram_header *header)
-+{
-+	char buf[] = "0xXXXXXXXX", *name, *value, *end, *eq;
-+
-+	/* (Re)initialize hash table */
-+	BCMINIT(nvram_free)();
-+
-+	/* Parse and set "name=value\0 ... \0\0" */
-+	name = (char *) &header[1];
-+	end = (char *) header + NVRAM_SPACE - 2;
-+	end[0] = end[1] = '\0';
-+	for (; *name; name = value + strlen(value) + 1) {
-+		if (!(eq = strchr(name, '=')))
-+			break;
-+		*eq = '\0';
-+		value = eq + 1;
-+		BCMINIT(_nvram_set)(name, value);
-+		*eq = '=';
-+	}
-+
-+	/* Set special SDRAM parameters */
-+	if (!BCMINIT(_nvram_get)("sdram_init")) {
-+		sprintf(buf, "0x%04X", (uint16)(header->crc_ver_init >> 16));
-+		BCMINIT(_nvram_set)("sdram_init", buf);
-+	}
-+	if (!BCMINIT(_nvram_get)("sdram_config")) {
-+		sprintf(buf, "0x%04X", (uint16)(header->config_refresh & 0xffff));
-+		BCMINIT(_nvram_set)("sdram_config", buf);
-+	}
-+	if (!BCMINIT(_nvram_get)("sdram_refresh")) {
-+		sprintf(buf, "0x%04X", (uint16)((header->config_refresh >> 16) & 0xffff));
-+		BCMINIT(_nvram_set)("sdram_refresh", buf);
-+	}
-+	if (!BCMINIT(_nvram_get)("sdram_ncdl")) {
-+		sprintf(buf, "0x%08X", header->config_ncdl);
-+		BCMINIT(_nvram_set)("sdram_ncdl", buf);
-+	}
-+
-+	return 0;
-+}
-+
-+/* Get the value of an NVRAM variable. Should be locked. */
-+char * 
-+BCMINITFN(_nvram_get)(const char *name)
-+{
-+	uint i;
-+	struct nvram_tuple *t;
-+	char *value;
-+
-+	if (!name)
-+		return NULL;
-+
-+	/* Hash the name */
-+	i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash));
-+
-+	/* Find the associated tuple in the hash table */
-+	for (t = BCMINIT(nvram_hash)[i]; t && strcmp(t->name, name); t = t->next);
-+
-+	value = t ? t->value : NULL;
-+
-+	return value;
-+}
-+
-+/* Get the value of an NVRAM variable. Should be locked. */
-+int 
-+BCMINITFN(_nvram_set)(const char *name, const char *value)
-+{
-+	uint i;
-+	struct nvram_tuple *t, *u, **prev;
-+
-+	/* Hash the name */
-+	i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash));
-+
-+	/* Find the associated tuple in the hash table */
-+	for (prev = &BCMINIT(nvram_hash)[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev);
-+
-+	/* (Re)allocate tuple */
-+	if (!(u = BCMINIT(_nvram_realloc)(t, name, value)))
-+		return -12; /* -ENOMEM */
-+
-+	/* Value reallocated */
-+	if (t && t == u)
-+		return 0;
-+
-+	/* Move old tuple to the dead table */
-+	if (t) {
-+		*prev = t->next;
-+		t->next = nvram_dead;
-+		nvram_dead = t;
-+	}
-+
-+	/* Add new tuple to the hash table */
-+	u->next = BCMINIT(nvram_hash)[i];
-+	BCMINIT(nvram_hash)[i] = u;
-+
-+	return 0;
-+}
-+
-+/* Unset the value of an NVRAM variable. Should be locked. */
-+int 
-+BCMINITFN(_nvram_unset)(const char *name)
-+{
-+	uint i;
-+	struct nvram_tuple *t, **prev;
-+
-+	if (!name)
-+		return 0;
-+
-+	/* Hash the name */
-+	i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash));
-+
-+	/* Find the associated tuple in the hash table */
-+	for (prev = &BCMINIT(nvram_hash)[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev);
-+
-+	/* Move it to the dead table */
-+	if (t) {
-+		*prev = t->next;
-+		t->next = nvram_dead;
-+		nvram_dead = t;
-+	}
-+
-+	return 0;
-+}
-+
-+/* Get all NVRAM variables. Should be locked. */
-+int 
-+BCMINITFN(_nvram_getall)(char *buf, int count)
-+{
-+	uint i;
-+	struct nvram_tuple *t;
-+	int len = 0;
-+
-+	bzero(buf, count);
-+
-+	/* Write name=value\0 ... \0\0 */
-+	for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) {
-+		for (t = BCMINIT(nvram_hash)[i]; t; t = t->next) {
-+			if ((count - len) > (strlen(t->name) + 1 + strlen(t->value) + 1))
-+				len += sprintf(buf + len, "%s=%s", t->name, t->value) + 1;
-+			else
-+				break;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+/* Regenerate NVRAM. Should be locked. */
-+int
-+BCMINITFN(_nvram_commit)(struct nvram_header *header)
-+{
-+	char *init, *config, *refresh, *ncdl;
-+	char *ptr, *end;
-+	int i;
-+	struct nvram_tuple *t;
-+	struct nvram_header tmp;
-+	uint8 crc;
-+
-+	/* Regenerate header */
-+	header->magic = NVRAM_MAGIC;
-+	header->crc_ver_init = (NVRAM_VERSION << 8);
-+	if (!(init = BCMINIT(_nvram_get)("sdram_init")) ||
-+	    !(config = BCMINIT(_nvram_get)("sdram_config")) ||
-+	    !(refresh = BCMINIT(_nvram_get)("sdram_refresh")) ||
-+	    !(ncdl = BCMINIT(_nvram_get)("sdram_ncdl"))) {
-+		header->crc_ver_init |= SDRAM_INIT << 16;
-+		header->config_refresh = SDRAM_CONFIG;
-+		header->config_refresh |= SDRAM_REFRESH << 16;
-+		header->config_ncdl = 0;
-+	} else {
-+		header->crc_ver_init |= (bcm_strtoul(init, NULL, 0) & 0xffff) << 16;
-+		header->config_refresh = bcm_strtoul(config, NULL, 0) & 0xffff;
-+		header->config_refresh |= (bcm_strtoul(refresh, NULL, 0) & 0xffff) << 16;
-+		header->config_ncdl = bcm_strtoul(ncdl, NULL, 0);
-+	}
-+
-+	/* Clear data area */
-+	ptr = (char *) header + sizeof(struct nvram_header);
-+	bzero(ptr, NVRAM_SPACE - sizeof(struct nvram_header));
-+
-+	/* Leave space for a double NUL at the end */
-+	end = (char *) header + NVRAM_SPACE - 2;
-+
-+	/* Write out all tuples */
-+	for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) {
-+		for (t = BCMINIT(nvram_hash)[i]; t; t = t->next) {
-+			if ((ptr + strlen(t->name) + 1 + strlen(t->value) + 1) > end)
-+				break;
-+			ptr += sprintf(ptr, "%s=%s", t->name, t->value) + 1;
-+		}
-+	}
-+
-+	/* End with a double NUL */
-+	ptr += 2;
-+
-+	/* Set new length */
-+	header->len = ROUNDUP(ptr - (char *) header, 4);
-+
-+	/* Little-endian CRC8 over the last 11 bytes of the header */
-+	tmp.crc_ver_init = htol32(header->crc_ver_init);
-+	tmp.config_refresh = htol32(header->config_refresh);
-+	tmp.config_ncdl = htol32(header->config_ncdl);
-+	crc = hndcrc8((char *) &tmp + 9, sizeof(struct nvram_header) - 9, CRC8_INIT_VALUE);
-+
-+	/* Continue CRC8 over data bytes */
-+	crc = hndcrc8((char *) &header[1], header->len - sizeof(struct nvram_header), crc);
-+
-+	/* Set new CRC8 */
-+	header->crc_ver_init |= crc;
-+
-+	/* Reinitialize hash table */
-+	return BCMINIT(nvram_rehash)(header);
-+}
-+
-+/* Initialize hash table. Should be locked. */
-+int 
-+BCMINITFN(_nvram_init)(void)
-+{
-+	struct nvram_header *header;
-+	int ret;
-+
-+	if (!(header = (struct nvram_header *) kmalloc(NVRAM_SPACE, GFP_ATOMIC))) {
-+		return -12; /* -ENOMEM */
-+	}
-+
-+	if ((ret = BCMINIT(_nvram_read)(header)) == 0 &&
-+	    header->magic == NVRAM_MAGIC)
-+		BCMINIT(nvram_rehash)(header);
-+
-+	kfree(header);
-+	return ret;
-+}
-+
-+/* Free hash table. Should be locked. */
-+void 
-+BCMINITFN(_nvram_exit)(void)
-+{
-+	BCMINIT(nvram_free)();
-+}
-diff -urN linux.old/arch/mips/bcm947xx/nvram_linux.c linux.dev/arch/mips/bcm947xx/nvram_linux.c
---- linux.old/arch/mips/bcm947xx/nvram_linux.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/nvram_linux.c	2006-04-27 23:30:07.000000000 +0200
-@@ -0,0 +1,723 @@
-+/*
-+ * NVRAM variable manipulation (Linux kernel half)
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: nvram_linux.c,v 1.19 2006/04/08 07:12:42 honor Exp $
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/interrupt.h>
-+#include <linux/spinlock.h>
-+#include <linux/slab.h>
-+#include <linux/bootmem.h>
-+#include <linux/wrapper.h>
-+#include <linux/fs.h>
-+#include <linux/miscdevice.h>
-+#include <linux/mtd/mtd.h>
-+#include <asm/addrspace.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmendian.h>
-+#include <bcmnvram.h>
-+#include <bcmutils.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <sbutils.h>
-+#include <hndmips.h>
-+#include <sflash.h>
-+
-+/* In BSS to minimize text size and page aligned so it can be mmap()-ed */
-+static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE)));
-+
-+#ifdef MODULE
-+
-+#define early_nvram_get(name) nvram_get(name)
-+
-+#else /* !MODULE */
-+
-+/* Global SB handle */
-+extern void *bcm947xx_sbh;
-+extern spinlock_t bcm947xx_sbh_lock;
-+
-+static int cfe_env;
-+extern char *cfe_env_get(char *nv_buf, const char *name);
-+
-+/* Convenience */
-+#define sbh bcm947xx_sbh
-+#define sbh_lock bcm947xx_sbh_lock
-+#define KB * 1024
-+#define MB * 1024 * 1024
-+
-+/* Probe for NVRAM header */
-+static void __init
-+early_nvram_init(void)
-+{
-+	struct nvram_header *header;
-+	chipcregs_t *cc;
-+	struct sflash *info = NULL;
-+	int i;
-+	uint32 base, off, lim;
-+	u32 *src, *dst;
-+
-+	if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) {
-+		base = KSEG1ADDR(SB_FLASH2);
-+		switch (readl(&cc->capabilities) & CAP_FLASH_MASK) {
-+		case PFLASH:
-+			lim = SB_FLASH2_SZ;
-+			break;
-+
-+		case SFLASH_ST:
-+		case SFLASH_AT:
-+			if ((info = sflash_init(cc)) == NULL)
-+				return;
-+			lim = info->size;
-+			break;
-+
-+		case FLASH_NONE:
-+		default:
-+			return;
-+		}
-+	} else {
-+		/* extif assumed, Stop at 4 MB */
-+		base = KSEG1ADDR(SB_FLASH1);
-+		lim = SB_FLASH1_SZ;
-+	}
-+
-+	/* XXX: hack for supporting the CFE environment stuff on WGT634U */
-+	src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
-+	dst = (u32 *) nvram_buf;
-+	if ((lim == 0x02000000) && ((*src & 0xff00ff) == 0x000001)) {
-+		printk("early_nvram_init: WGT634U NVRAM found.\n");
-+
-+		for (i = 0; i < 0x1ff0; i++) {
-+			if (*src == 0xFFFFFFFF)
-+				break;
-+			*dst++ = *src++;
-+		}
-+		cfe_env = 1;
-+		return;
-+	}
-+
-+	off = FLASH_MIN;
-+	while (off <= lim) {
-+		/* Windowed flash access */
-+		header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE);
-+		if (header->magic == NVRAM_MAGIC)
-+			goto found;
-+		off <<= 1;
-+	}
-+
-+	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
-+	header = (struct nvram_header *) KSEG1ADDR(base + 4 KB);
-+	if (header->magic == NVRAM_MAGIC)
-+		goto found;
-+	
-+	header = (struct nvram_header *) KSEG1ADDR(base + 1 KB);
-+	if (header->magic == NVRAM_MAGIC)
-+		goto found;
-+	
-+	printk("early_nvram_init: NVRAM not found\n");
-+	return;
-+
-+found:
-+	src = (u32 *) header;
-+	dst = (u32 *) nvram_buf;
-+	for (i = 0; i < sizeof(struct nvram_header); i += 4)
-+		*dst++ = *src++;
-+	for (; i < header->len && i < NVRAM_SPACE; i += 4)
-+		*dst++ = ltoh32(*src++);
-+}
-+
-+/* Early (before mm or mtd) read-only access to NVRAM */
-+static char * __init
-+early_nvram_get(const char *name)
-+{
-+	char *var, *value, *end, *eq;
-+
-+	if (!name)
-+		return NULL;
-+
-+	/* Too early? */
-+	if (sbh == NULL)
-+		return NULL;
-+
-+	if (!nvram_buf[0])
-+		early_nvram_init();
-+
-+	if (cfe_env)
-+		return cfe_env_get(nvram_buf, name);
-+
-+	/* Look for name=value and return value */
-+	var = &nvram_buf[sizeof(struct nvram_header)];
-+	end = nvram_buf + sizeof(nvram_buf) - 2;
-+	end[0] = end[1] = '\0';
-+	for (; *var; var = value + strlen(value) + 1) {
-+		if (!(eq = strchr(var, '=')))
-+			break;
-+		value = eq + 1;
-+		if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
-+			return value;
-+	}
-+
-+	return NULL;
-+}
-+
-+static int __init
-+early_nvram_getall(char *buf, int count)
-+{
-+	char *var, *end;
-+	int len = 0;
-+	
-+	/* Too early? */
-+	if (sbh == NULL)
-+		return -1;
-+
-+	if (!nvram_buf[0])
-+		early_nvram_init();
-+
-+	bzero(buf, count);
-+
-+	/* Write name=value\0 ... \0\0 */
-+	var = &nvram_buf[sizeof(struct nvram_header)];
-+	end = nvram_buf + sizeof(nvram_buf) - 2;
-+	end[0] = end[1] = '\0';
-+	for (; *var; var += strlen(var) + 1) {
-+		if ((count - len) <= (strlen(var) + 1))
-+			break;
-+		len += sprintf(buf + len, "%s", var) + 1;
-+	}
-+
-+	return 0;
-+}
-+#endif /* !MODULE */
-+
-+extern char * _nvram_get(const char *name);
-+extern int _nvram_set(const char *name, const char *value);
-+extern int _nvram_unset(const char *name);
-+extern int _nvram_getall(char *buf, int count);
-+extern int _nvram_commit(struct nvram_header *header);
-+extern int _nvram_init(void *sbh);
-+extern void _nvram_exit(void);
-+
-+/* Globals */
-+static spinlock_t nvram_lock = SPIN_LOCK_UNLOCKED;
-+static struct semaphore nvram_sem;
-+static unsigned long nvram_offset = 0;
-+static int nvram_major = -1;
-+static devfs_handle_t nvram_handle = NULL;
-+static struct mtd_info *nvram_mtd = NULL;
-+
-+int
-+_nvram_read(char *buf)
-+{
-+	struct nvram_header *header = (struct nvram_header *) buf;
-+	size_t len;
-+
-+	if (!nvram_mtd ||
-+	    MTD_READ(nvram_mtd, nvram_mtd->size - NVRAM_SPACE, NVRAM_SPACE, &len, buf) ||
-+	    len != NVRAM_SPACE ||
-+	    header->magic != NVRAM_MAGIC) {
-+		/* Maybe we can recover some data from early initialization */
-+		memcpy(buf, nvram_buf, NVRAM_SPACE);
-+	}
-+
-+	return 0;
-+}
-+
-+struct nvram_tuple *
-+_nvram_realloc(struct nvram_tuple *t, const char *name, const char *value)
-+{
-+	if ((nvram_offset + strlen(value) + 1) > NVRAM_SPACE)
-+		return NULL;
-+
-+	if (!t) {
-+		if (!(t = kmalloc(sizeof(struct nvram_tuple) + strlen(name) + 1, GFP_ATOMIC)))
-+			return NULL;
-+
-+		/* Copy name */
-+		t->name = (char *) &t[1];
-+		strcpy(t->name, name);
-+
-+		t->value = NULL;
-+	}
-+
-+	/* Copy value */
-+	if (!t->value || strcmp(t->value, value)) {
-+		t->value = &nvram_buf[nvram_offset];
-+		strcpy(t->value, value);
-+		nvram_offset += strlen(value) + 1;
-+	}
-+
-+	return t;
-+}
-+
-+void
-+_nvram_free(struct nvram_tuple *t)
-+{
-+	if (!t)
-+		nvram_offset = 0;
-+	else
-+		kfree(t);
-+}
-+
-+int
-+nvram_set(const char *name, const char *value)
-+{
-+	unsigned long flags;
-+	int ret;
-+	struct nvram_header *header;
-+
-+	spin_lock_irqsave(&nvram_lock, flags);
-+	if ((ret = _nvram_set(name, value))) {
-+		/* Consolidate space and try again */
-+		if ((header = kmalloc(NVRAM_SPACE, GFP_ATOMIC))) {
-+			if (_nvram_commit(header) == 0)
-+				ret = _nvram_set(name, value);
-+			kfree(header);
-+		}
-+	}
-+	spin_unlock_irqrestore(&nvram_lock, flags);
-+
-+	return ret;
-+}
-+
-+char *
-+real_nvram_get(const char *name)
-+{
-+	unsigned long flags;
-+	char *value;
-+
-+	spin_lock_irqsave(&nvram_lock, flags);
-+	value = _nvram_get(name);
-+	spin_unlock_irqrestore(&nvram_lock, flags);
-+
-+	return value;
-+}
-+
-+char *
-+nvram_get(const char *name)
-+{
-+	if (nvram_major >= 0)
-+		return real_nvram_get(name);
-+	else
-+		return early_nvram_get(name);
-+}
-+
-+int
-+nvram_unset(const char *name)
-+{
-+	unsigned long flags;
-+	int ret;
-+
-+	spin_lock_irqsave(&nvram_lock, flags);
-+	ret = _nvram_unset(name);
-+	spin_unlock_irqrestore(&nvram_lock, flags);
-+
-+	return ret;
-+}
-+
-+static void
-+erase_callback(struct erase_info *done)
-+{
-+	wait_queue_head_t *wait_q = (wait_queue_head_t *) done->priv;
-+	wake_up(wait_q);
-+}
-+
-+int
-+nvram_commit(void)
-+{
-+	char *buf;
-+	size_t erasesize, len, magic_len;
-+	unsigned int i;
-+	int ret;
-+	struct nvram_header *header;
-+	unsigned long flags;
-+	u_int32_t offset;
-+	DECLARE_WAITQUEUE(wait, current);
-+	wait_queue_head_t wait_q;
-+	struct erase_info erase;
-+	u_int32_t magic_offset = 0; /* Offset for writing MAGIC # */
-+
-+	if (!nvram_mtd) {
-+		printk("nvram_commit: NVRAM not found\n");
-+		return -ENODEV;
-+	}
-+
-+	if (in_interrupt()) {
-+		printk("nvram_commit: not committing in interrupt\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Backup sector blocks to be erased */
-+	erasesize = ROUNDUP(NVRAM_SPACE, nvram_mtd->erasesize);
-+	if (!(buf = kmalloc(erasesize, GFP_KERNEL))) {
-+		printk("nvram_commit: out of memory\n");
-+		return -ENOMEM;
-+	}
-+
-+	down(&nvram_sem);
-+
-+	if ((i = erasesize - NVRAM_SPACE) > 0) {
-+		offset = nvram_mtd->size - erasesize;
-+		len = 0;
-+		ret = MTD_READ(nvram_mtd, offset, i, &len, buf);
-+		if (ret || len != i) {
-+			printk("nvram_commit: read error ret = %d, len = %d/%d\n", ret, len, i);
-+			ret = -EIO;
-+			goto done;
-+		}
-+		header = (struct nvram_header *)(buf + i);
-+		magic_offset = i + ((void *)&header->magic - (void *)header);
-+	} else {
-+		offset = nvram_mtd->size - NVRAM_SPACE;
-+		magic_offset = ((void *)&header->magic - (void *)header);
-+		header = (struct nvram_header *)buf;
-+	}
-+
-+	/* clear the existing magic # to mark the NVRAM as unusable 
-+		 we can pull MAGIC bits low without erase	*/
-+	header->magic = NVRAM_CLEAR_MAGIC; /* All zeros magic */
-+
-+	/* Unlock sector blocks (for Intel 28F320C3B flash) , 20060309 */
-+	if(nvram_mtd->unlock)
-+		nvram_mtd->unlock(nvram_mtd, offset, nvram_mtd->erasesize);
-+
-+	ret = MTD_WRITE(nvram_mtd, offset + magic_offset, sizeof(header->magic), 
-+									&magic_len, (char *)&header->magic);
-+	if (ret || magic_len != sizeof(header->magic)) {
-+		printk("nvram_commit: clear MAGIC error\n");
-+		ret = -EIO;
-+		goto done;
-+	}
-+
-+	header->magic = NVRAM_MAGIC; /* reset MAGIC before we regenerate the NVRAM,
-+																otherwise we'll have an incorrect CRC */
-+	/* Regenerate NVRAM */
-+	spin_lock_irqsave(&nvram_lock, flags);
-+	ret = _nvram_commit(header);
-+	spin_unlock_irqrestore(&nvram_lock, flags);
-+	if (ret)
-+		goto done;
-+
-+	/* Erase sector blocks */
-+	init_waitqueue_head(&wait_q);
-+	for (; offset < nvram_mtd->size - NVRAM_SPACE + header->len; offset += nvram_mtd->erasesize) {
-+		erase.mtd = nvram_mtd;
-+		erase.addr = offset;
-+		erase.len = nvram_mtd->erasesize;
-+		erase.callback = erase_callback;
-+		erase.priv = (u_long) &wait_q;
-+
-+		set_current_state(TASK_INTERRUPTIBLE);
-+		add_wait_queue(&wait_q, &wait);
-+
-+		/* Unlock sector blocks */
-+		if (nvram_mtd->unlock)
-+			nvram_mtd->unlock(nvram_mtd, offset, nvram_mtd->erasesize);
-+
-+		if ((ret = MTD_ERASE(nvram_mtd, &erase))) {
-+			set_current_state(TASK_RUNNING);
-+			remove_wait_queue(&wait_q, &wait);
-+			printk("nvram_commit: erase error\n");
-+			goto done;
-+		}
-+
-+		/* Wait for erase to finish */
-+		schedule();
-+		remove_wait_queue(&wait_q, &wait);
-+	}
-+
-+	/* Write partition up to end of data area */
-+	header->magic = NVRAM_INVALID_MAGIC; /* All ones magic */
-+	offset = nvram_mtd->size - erasesize;
-+	i = erasesize - NVRAM_SPACE + header->len;
-+	ret = MTD_WRITE(nvram_mtd, offset, i, &len, buf);
-+	if (ret || len != i) {
-+		printk("nvram_commit: write error\n");
-+		ret = -EIO;
-+		goto done;
-+	}
-+
-+	/* Now mark the NVRAM in flash as "valid" by setting the correct
-+		 MAGIC # */
-+	header->magic = NVRAM_MAGIC;
-+	ret = MTD_WRITE(nvram_mtd, offset + magic_offset, sizeof(header->magic), 
-+									&magic_len, (char *)&header->magic);
-+	if (ret || magic_len != sizeof(header->magic)) {
-+		printk("nvram_commit: write MAGIC error\n");
-+		ret = -EIO;
-+		goto done;
-+	}
-+
-+	/*
-+	 * Reading a few bytes back here will put the device
-+	 * back to the correct mode on certain flashes */
-+	offset = nvram_mtd->size - erasesize;
-+	ret = MTD_READ(nvram_mtd, offset, 4, &len, buf);
-+
-+ done:
-+	up(&nvram_sem);
-+	kfree(buf);
-+
-+	return ret;
-+}
-+
-+int
-+nvram_getall(char *buf, int count)
-+{
-+	unsigned long flags;
-+	int ret;
-+
-+	spin_lock_irqsave(&nvram_lock, flags);
-+	if (nvram_major >= 0)
-+		ret = _nvram_getall(buf, count);
-+	else
-+		ret = early_nvram_getall(buf, count);
-+	spin_unlock_irqrestore(&nvram_lock, flags);
-+
-+	return ret;
-+}
-+
-+
-+
-+
-+
-+
-+
-+/* User mode interface below */
-+
-+static ssize_t
-+dev_nvram_read(struct file *file, char *buf, size_t count, loff_t *ppos)
-+{
-+	char tmp[100], *name = tmp, *value;
-+	ssize_t ret;
-+	unsigned long off;
-+
-+	if (count > sizeof(tmp)) {
-+		if (!(name = kmalloc(count, GFP_KERNEL)))
-+			return -ENOMEM;
-+	}
-+
-+	if (copy_from_user(name, buf, count)) {
-+		ret = -EFAULT;
-+		goto done;
-+	}
-+
-+	if (*name == '\0') {
-+		/* Get all variables */
-+		ret = nvram_getall(name, count);
-+		if (ret == 0) {
-+			if (copy_to_user(buf, name, count)) {
-+				ret = -EFAULT;
-+				goto done;
-+			}
-+			ret = count;
-+		}
-+	} else {
-+		if (!(value = nvram_get(name))) {
-+			ret = 0;
-+			goto done;
-+		}
-+
-+		/* Provide the offset into mmap() space */
-+		off = (unsigned long) value - (unsigned long) nvram_buf;
-+
-+		if (put_user(off, (unsigned long *) buf)) {
-+			ret = -EFAULT;
-+			goto done;
-+		}
-+
-+		ret = sizeof(unsigned long);
-+	}
-+
-+	flush_cache_all();	
-+ 
-+done:
-+	if (name != tmp)
-+		kfree(name);
-+
-+	return ret;
-+}
-+
-+static ssize_t
-+dev_nvram_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
-+{
-+	char tmp[100], *name = tmp, *value;
-+	ssize_t ret;
-+
-+	if (count > sizeof(tmp)) {
-+		if (!(name = kmalloc(count, GFP_KERNEL)))
-+			return -ENOMEM;
-+	}
-+
-+	if (copy_from_user(name, buf, count)) {
-+		ret = -EFAULT;
-+		goto done;
-+	}
-+
-+	value = name;
-+	name = strsep(&value, "=");
-+	if (value)
-+		ret = nvram_set(name, value) ? : count;
-+	else
-+		ret = nvram_unset(name) ? : count;
-+
-+ done:
-+	if (name != tmp)
-+		kfree(name);
-+
-+	return ret;
-+}	
-+
-+static int
-+dev_nvram_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+	if (cmd != NVRAM_MAGIC)
-+		return -EINVAL;
-+
-+	return nvram_commit();
-+}
-+
-+static int
-+dev_nvram_mmap(struct file *file, struct vm_area_struct *vma)
-+{
-+	unsigned long offset = virt_to_phys(nvram_buf);
-+
-+	if (remap_page_range(vma->vm_start, offset, vma->vm_end-vma->vm_start,
-+			     vma->vm_page_prot))
-+		return -EAGAIN;
-+
-+	return 0;
-+}
-+
-+static int
-+dev_nvram_open(struct inode *inode, struct file * file)
-+{
-+	MOD_INC_USE_COUNT;
-+	return 0;
-+}
-+
-+static int
-+dev_nvram_release(struct inode *inode, struct file * file)
-+{
-+	MOD_DEC_USE_COUNT;
-+	return 0;
-+}
-+
-+static struct file_operations dev_nvram_fops = {
-+	owner:		THIS_MODULE,
-+	open:		dev_nvram_open,
-+	release:	dev_nvram_release,
-+	read:		dev_nvram_read,
-+	write:		dev_nvram_write,
-+	ioctl:		dev_nvram_ioctl,
-+	mmap:		dev_nvram_mmap,
-+};
-+
-+static void
-+dev_nvram_exit(void)
-+{
-+	int order = 0;
-+	struct page *page, *end;
-+
-+	if (nvram_handle)
-+		devfs_unregister(nvram_handle);
-+
-+	if (nvram_major >= 0)
-+		devfs_unregister_chrdev(nvram_major, "nvram");
-+
-+	if (nvram_mtd)
-+		put_mtd_device(nvram_mtd);
-+
-+	while ((PAGE_SIZE << order) < NVRAM_SPACE)
-+		order++;
-+	end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1);
-+	for (page = virt_to_page(nvram_buf); page <= end; page++)
-+		mem_map_unreserve(page);
-+
-+	_nvram_exit();
-+}
-+
-+static int __init
-+dev_nvram_init(void)
-+{
-+	int order = 0, ret = 0;
-+	struct page *page, *end;
-+	unsigned int i;
-+
-+	/* Allocate and reserve memory to mmap() */
-+	while ((PAGE_SIZE << order) < NVRAM_SPACE)
-+		order++;
-+	end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1);
-+	for (page = virt_to_page(nvram_buf); page <= end; page++)
-+		mem_map_reserve(page);
-+
-+#ifdef CONFIG_MTD
-+	/* Find associated MTD device */
-+	for (i = 0; i < MAX_MTD_DEVICES; i++) {
-+		nvram_mtd = get_mtd_device(NULL, i);
-+		if (nvram_mtd) {
-+			if (!strcmp(nvram_mtd->name, "nvram") &&
-+			    nvram_mtd->size >= NVRAM_SPACE)
-+				break;
-+			put_mtd_device(nvram_mtd);
-+		}
-+	}
-+	if (i >= MAX_MTD_DEVICES)
-+		nvram_mtd = NULL;
-+#endif
-+
-+	/* Initialize hash table lock */
-+	spin_lock_init(&nvram_lock);
-+
-+	/* Initialize commit semaphore */
-+	init_MUTEX(&nvram_sem);
-+
-+	/* Register char device */
-+	if ((nvram_major = devfs_register_chrdev(0, "nvram", &dev_nvram_fops)) < 0) {
-+		ret = nvram_major;
-+		goto err;
-+	}
-+
-+	/* Initialize hash table */
-+	_nvram_init(sbh);
-+
-+	/* Create /dev/nvram handle */
-+	nvram_handle = devfs_register(NULL, "nvram", DEVFS_FL_NONE, nvram_major, 0,
-+				      S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP, &dev_nvram_fops, NULL);
-+
-+	/* Set the SDRAM NCDL value into NVRAM if not already done */
-+	if (getintvar(NULL, "sdram_ncdl") == 0) {
-+		unsigned int ncdl;
-+		char buf[] = "0x00000000";
-+
-+		if ((ncdl = sb_memc_get_ncdl(sbh))) {
-+			sprintf(buf, "0x%08x", ncdl);
-+			nvram_set("sdram_ncdl", buf);
-+			nvram_commit();
-+		}
-+	}
-+
-+	return 0;
-+
-+ err:
-+	dev_nvram_exit();
-+	return ret;
-+}
-+
-+module_init(dev_nvram_init);
-+module_exit(dev_nvram_exit);
-diff -urN linux.old/arch/mips/bcm947xx/pcibios.c linux.dev/arch/mips/bcm947xx/pcibios.c
---- linux.old/arch/mips/bcm947xx/pcibios.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/pcibios.c	2006-04-27 23:42:50.000000000 +0200
-@@ -0,0 +1,380 @@
-+/*
-+ * Low-Level PCI and SB support for BCM47xx (Linux support code)
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: pcibios.c,v 1.1.1.9 2006/02/27 03:42:55 honor Exp $
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/paccess.h>
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <sbconfig.h>
-+#include <sbutils.h>
-+#include <hndpci.h>
-+#include <pcicfg.h>
-+#include <bcmdevs.h>
-+#include <bcmnvram.h>
-+
-+/* Global SB handle */
-+extern sb_t *bcm947xx_sbh;
-+extern spinlock_t bcm947xx_sbh_lock;
-+
-+/* Convenience */
-+#define sbh bcm947xx_sbh
-+#define sbh_lock bcm947xx_sbh_lock
-+
-+static int
-+sbpci_read_config_byte(struct pci_dev *dev, int where, u8 *value)
-+{
-+	unsigned long flags;
-+	int ret;
-+
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
-+		PCI_FUNC(dev->devfn), where, value, sizeof(*value));
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int
-+sbpci_read_config_word(struct pci_dev *dev, int where, u16 *value)
-+{
-+	unsigned long flags;
-+	int ret;
-+
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
-+		PCI_FUNC(dev->devfn), where, value, sizeof(*value));
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int
-+sbpci_read_config_dword(struct pci_dev *dev, int where, u32 *value)
-+{
-+	unsigned long flags;
-+	int ret;
-+
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
-+		PCI_FUNC(dev->devfn), where, value, sizeof(*value));
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int
-+sbpci_write_config_byte(struct pci_dev *dev, int where, u8 value)
-+{
-+	unsigned long flags;
-+	int ret;
-+
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
-+		PCI_FUNC(dev->devfn), where, &value, sizeof(value));
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int
-+sbpci_write_config_word(struct pci_dev *dev, int where, u16 value)
-+{
-+	unsigned long flags;
-+	int ret;
-+
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
-+		PCI_FUNC(dev->devfn), where, &value, sizeof(value));
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int
-+sbpci_write_config_dword(struct pci_dev *dev, int where, u32 value)
-+{
-+	unsigned long flags;
-+	int ret;
-+
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
-+		PCI_FUNC(dev->devfn), where, &value, sizeof(value));
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-+}
-+
-+static struct pci_ops pcibios_ops = {
-+	sbpci_read_config_byte,
-+	sbpci_read_config_word,
-+	sbpci_read_config_dword,
-+	sbpci_write_config_byte,
-+	sbpci_write_config_word,
-+	sbpci_write_config_dword
-+};
-+
-+
-+void __init
-+pcibios_init(void)
-+{
-+	ulong flags;
-+
-+	if (!(sbh = sb_kattach()))
-+		panic("sb_kattach failed");
-+	spin_lock_init(&sbh_lock);
-+
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	sbpci_init(sbh);
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+
-+	set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000));
-+
-+	/* Scan the SB bus */
-+	pci_scan_bus(0, &pcibios_ops, NULL);
-+
-+}
-+
-+char * __init
-+pcibios_setup(char *str)
-+{
-+	if (!strncmp(str, "ban=", 4)) {
-+		sbpci_ban(simple_strtoul(str + 4, NULL, 0));
-+		return NULL;
-+	}
-+
-+	return (str);
-+}
-+
-+static u32 pci_iobase = 0x100;
-+static u32 pci_membase = SB_PCI_DMA;
-+
-+void __init
-+pcibios_fixup_bus(struct pci_bus *b)
-+{
-+	struct list_head *ln;
-+	struct pci_dev *d;
-+	struct resource *res;
-+	int pos, size;
-+	u32 *base;
-+	u8 irq;
-+
-+	printk("PCI: Fixing up bus %d\n", b->number);
-+
-+	/* Fix up SB */
-+	if (b->number == 0) {
-+		for (ln = b->devices.next; ln != &b->devices; ln = ln->next) {
-+			d = pci_dev_b(ln);
-+			/* Fix up interrupt lines */
-+			pci_read_config_byte(d, PCI_INTERRUPT_LINE, &irq);
-+			d->irq = irq + 2;
-+			pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
-+		}
-+	}
-+
-+	/* Fix up external PCI */
-+	else {
-+		for (ln = b->devices.next; ln != &b->devices; ln = ln->next) {
-+			d = pci_dev_b(ln);
-+			/* Fix up resource bases */
-+			for (pos = 0; pos < 6; pos++) {
-+				res = &d->resource[pos];
-+				base = (res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase;
-+				if (res->end) {
-+					size = res->end - res->start + 1;
-+					if (*base & (size - 1))
-+						*base = (*base + size) & ~(size - 1);
-+					res->start = *base;
-+					res->end = res->start + size - 1;
-+					*base += size;
-+					pci_write_config_dword(d,
-+						PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
-+				}
-+				/* Fix up PCI bridge BAR0 only */
-+				if (b->number == 1 && PCI_SLOT(d->devfn) == 0)
-+					break;
-+			}
-+			/* Fix up interrupt lines */
-+			if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))
-+				d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq;
-+			pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
-+		}
-+	}
-+}
-+
-+unsigned int
-+pcibios_assign_all_busses(void)
-+{
-+	return 1;
-+}
-+
-+void
-+pcibios_align_resource(void *data, struct resource *res,
-+	unsigned long size, unsigned long align)
-+{
-+}
-+
-+int
-+pcibios_enable_resources(struct pci_dev *dev)
-+{
-+	u16 cmd, old_cmd;
-+	int idx;
-+	struct resource *r;
-+
-+	/* External PCI only */
-+	if (dev->bus->number == 0)
-+		return 0;
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	old_cmd = cmd;
-+	for (idx = 0; idx < 6; idx++) {
-+		r = &dev->resource[idx];
-+		if (r->flags & IORESOURCE_IO)
-+			cmd |= PCI_COMMAND_IO;
-+		if (r->flags & IORESOURCE_MEM)
-+			cmd |= PCI_COMMAND_MEMORY;
-+	}
-+	if (dev->resource[PCI_ROM_RESOURCE].start)
-+		cmd |= PCI_COMMAND_MEMORY;
-+	if (cmd != old_cmd) {
-+		printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd);
-+		pci_write_config_word(dev, PCI_COMMAND, cmd);
-+	}
-+	return 0;
-+}
-+
-+int
-+pcibios_enable_device(struct pci_dev *dev, int mask)
-+{
-+	ulong flags;
-+	uint coreidx;
-+	void *regs;
-+
-+	/* External PCI device enable */
-+	if (dev->bus->number != 0)
-+		return pcibios_enable_resources(dev);
-+
-+	/* These cores come out of reset enabled */
-+	if (dev->device == SB_MIPS ||
-+	    dev->device == SB_MIPS33 ||
-+	    dev->device == SB_EXTIF ||
-+	    dev->device == SB_CC)
-+		return 0;
-+
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	coreidx = sb_coreidx(sbh);
-+	regs = sb_setcoreidx(sbh, PCI_SLOT(dev->devfn));
-+	if (!regs)
-+		return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+	/* 
-+	 * The USB core requires a special bit to be set during core
-+	 * reset to enable host (OHCI) mode. Resetting the SB core in
-+	 * pcibios_enable_device() is a hack for compatibility with
-+	 * vanilla usb-ohci so that it does not have to know about
-+	 * SB. A driver that wants to use the USB core in device mode
-+	 * should know about SB and should reset the bit back to 0
-+	 * after calling pcibios_enable_device().
-+	 */
-+	if (sb_coreid(sbh) == SB_USB) {
-+		sb_core_disable(sbh, sb_coreflags(sbh, 0, 0));
-+		sb_core_reset(sbh, 1 << 29, 0);
-+	}
-+	/*
-+	 * USB 2.0 special considerations:
-+	 *
-+	 * 1. Since the core supports both OHCI and EHCI functions, it must
-+	 *    only be reset once.
-+	 *
-+	 * 2. In addition to the standard SB reset sequence, the Host Control
-+	 *    Register must be programmed to bring the USB core and various
-+	 *    phy components out of reset.
-+	 */
-+	else if (sb_coreid(sbh) == SB_USB20H) {
-+		if (!sb_iscoreup(sbh)) {
-+			sb_core_reset(sbh, 0, 0);
-+			writel(0x7FF, (ulong)regs + 0x200);
-+			udelay(1);
-+		}
-+	} else
-+		sb_core_reset(sbh, 0, 0);
-+
-+	sb_setcoreidx(sbh, coreidx);
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+
-+	return 0;
-+}
-+
-+void
-+pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-+	struct resource *res, int resource)
-+{
-+	unsigned long where, size;
-+	u32 reg;
-+
-+	/* External PCI only */
-+	if (dev->bus->number == 0)
-+		return;
-+
-+	where = PCI_BASE_ADDRESS_0 + (resource * 4);
-+	size = res->end - res->start;
-+	pci_read_config_dword(dev, where, &reg);
-+	reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
-+	pci_write_config_dword(dev, where, reg);
-+}
-+
-+static void __init
-+quirk_sbpci_bridge(struct pci_dev *dev)
-+{
-+	if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0)
-+		return;
-+
-+	printk("PCI: Fixing up bridge\n");
-+
-+	/* Enable PCI bridge bus mastering and memory space */
-+	pci_set_master(dev);
-+	pcibios_enable_resources(dev);
-+
-+	/* Enable PCI bridge BAR1 prefetch and burst */
-+	pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3);
-+}	
-+
-+struct pci_fixup pcibios_fixups[] = {
-+	{ PCI_FIXUP_HEADER, PCI_ANY_ID, PCI_ANY_ID, quirk_sbpci_bridge },
-+	{ 0 }
-+};
-+
-+/*
-+ *  If we set up a device for bus mastering, we need to check the latency
-+ *  timer as certain crappy BIOSes forget to set it properly.
-+ */
-+unsigned int pcibios_max_latency = 255;
-+
-+void pcibios_set_master(struct pci_dev *dev)
-+{
-+	u8 lat;
-+	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
-+	if (lat < 16)
-+		lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
-+	else if (lat > pcibios_max_latency)
-+		lat = pcibios_max_latency;
-+	else
-+		return;
-+	printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", dev->slot_name, lat);
-+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-+}
-+
-diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.c
---- linux.old/arch/mips/bcm947xx/prom.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/prom.c	2006-04-27 19:24:19.000000000 +0200
-@@ -0,0 +1,41 @@
-+/*
-+ * Early initialization code for BCM94710 boards
-+ *
-+ * Copyright 2004, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: prom.c,v 1.1 2005/03/16 13:49:59 wbx Exp $
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <asm/bootinfo.h>
-+
-+void __init
-+prom_init(int argc, const char **argv)
-+{
-+	unsigned long mem;
-+
-+        mips_machgroup = MACH_GROUP_BRCM;
-+        mips_machtype = MACH_BCM947XX;
-+
-+	/* Figure out memory size by finding aliases */
-+	for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
-+		if (*(unsigned long *)((unsigned long)(prom_init) + mem) == 
-+		    *(unsigned long *)(prom_init))
-+			break;
-+	}
-+	add_memory_region(0, mem, BOOT_MEM_RAM);
-+}
-+
-+void __init
-+prom_free_prom_memory(void)
-+{
-+}
-diff -urN linux.old/arch/mips/bcm947xx/sbmips.c linux.dev/arch/mips/bcm947xx/sbmips.c
---- linux.old/arch/mips/bcm947xx/sbmips.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/sbmips.c	2006-05-02 04:43:13.000000000 +0200
-@@ -0,0 +1,1132 @@
-+/*
-+ * BCM47XX Sonics SiliconBackplane MIPS core routines
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: hndmips.c,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#include <typedefs.h>
-+#include <bcmdefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <sbutils.h>
-+#include <bcmdevs.h>
-+#include <bcmnvram.h>
-+#include <sbconfig.h>
-+#include <sbextif.h>
-+#include <sbchipc.h>
-+#include <sbmemc.h>
-+#include <mipsinc.h>
-+#include <sbhndmips.h>
-+#include <hndcpu.h>
-+
-+/* sbipsflag register format, indexed by irq. */
-+static const uint32 sbips_int_mask[] = {
-+	0,	/* placeholder */
-+	SBIPS_INT1_MASK,
-+	SBIPS_INT2_MASK,
-+	SBIPS_INT3_MASK,
-+	SBIPS_INT4_MASK
-+};
-+
-+static const uint32 sbips_int_shift[] = {
-+	0,	/* placeholder */
-+	SBIPS_INT1_SHIFT,
-+	SBIPS_INT2_SHIFT,
-+	SBIPS_INT3_SHIFT,
-+	SBIPS_INT4_SHIFT
-+};
-+
-+/*
-+ * Map SB cores sharing the MIPS hardware IRQ0 to virtual dedicated OS IRQs.
-+ * Per-port BSP code is required to provide necessary translations between
-+ * the shared MIPS IRQ and the virtual OS IRQs based on SB core flag.
-+ *
-+ * See sb_irq() for the mapping.
-+ */
-+static uint shirq_map_base = 0;
-+
-+/* Returns the SB interrupt flag of the current core. */
-+static uint32
-+sb_getflag(sb_t *sbh)
-+{
-+	osl_t *osh;
-+	void *regs;
-+	sbconfig_t *sb;
-+
-+	osh = sb_osh(sbh);
-+	regs = sb_coreregs(sbh);
-+	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+	return (R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK);
-+}
-+
-+/*
-+ * Returns the MIPS IRQ assignment of the current core. If unassigned,
-+ * 0 is returned.
-+ */
-+uint
-+sb_irq(sb_t *sbh)
-+{
-+	osl_t *osh;
-+	uint idx;
-+	void *regs;
-+	sbconfig_t *sb;
-+	uint32 flag, sbipsflag;
-+	uint irq = 0;
-+
-+	osh = sb_osh(sbh);
-+	flag = sb_getflag(sbh);
-+
-+	idx = sb_coreidx(sbh);
-+
-+	if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
-+	    (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
-+		sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+		/* sbipsflag specifies which core is routed to interrupts 1 to 4 */
-+		sbipsflag = R_REG(osh, &sb->sbipsflag);
-+		for (irq = 1; irq <= 4; irq++) {
-+			if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag)
-+				break;
-+		}
-+		if (irq == 5)
-+			irq = 0;
-+	}
-+
-+	sb_setcoreidx(sbh, idx);
-+
-+	return irq;
-+}
-+
-+/* Clears the specified MIPS IRQ. */
-+static void
-+BCMINITFN(sb_clearirq)(sb_t *sbh, uint irq)
-+{
-+	osl_t *osh;
-+	void *regs;
-+	sbconfig_t *sb;
-+
-+	osh = sb_osh(sbh);
-+
-+	if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
-+	    !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
-+		ASSERT(regs);
-+	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+	if (irq == 0)
-+		W_REG(osh, &sb->sbintvec, 0);
-+	else
-+		OR_REG(osh, &sb->sbipsflag, sbips_int_mask[irq]);
-+}
-+
-+/*
-+ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS
-+ * IRQ 0 may be assigned more than once.
-+ *
-+ * The old assignment to the specified core is removed first.
-+ */
-+static void
-+BCMINITFN(sb_setirq)(sb_t *sbh, uint irq, uint coreid, uint coreunit)
-+{
-+	osl_t *osh;
-+	void *regs;
-+	sbconfig_t *sb;
-+	uint32 flag;
-+	uint oldirq;
-+
-+	osh = sb_osh(sbh);
-+
-+	regs = sb_setcore(sbh, coreid, coreunit);
-+	ASSERT(regs);
-+	flag = sb_getflag(sbh);
-+	oldirq = sb_irq(sbh);
-+	if (oldirq)
-+		sb_clearirq(sbh, oldirq);
-+
-+	if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
-+	    !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
-+		ASSERT(regs);
-+	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+	if (!oldirq)
-+		AND_REG(osh, &sb->sbintvec, ~(1 << flag));
-+
-+	if (irq == 0)
-+		OR_REG(osh, &sb->sbintvec, 1 << flag);
-+	else {
-+		flag <<= sbips_int_shift[irq];
-+		ASSERT(!(flag & ~sbips_int_mask[irq]));
-+		flag |= R_REG(osh, &sb->sbipsflag) & ~sbips_int_mask[irq];
-+		W_REG(osh, &sb->sbipsflag, flag);
-+	}
-+}
-+
-+/*
-+ * Initializes clocks and interrupts. SB and NVRAM access must be
-+ * initialized prior to calling.
-+ *
-+ * 'shirqmap' enables virtual dedicated OS IRQ mapping if non-zero.
-+ */
-+void
-+BCMINITFN(sb_mips_init)(sb_t *sbh, uint shirqmap)
-+{
-+	osl_t *osh;
-+	ulong hz, ns, tmp;
-+	extifregs_t *eir;
-+	chipcregs_t *cc;
-+	char *value;
-+	uint irq;
-+
-+	osh = sb_osh(sbh);
-+
-+	/* Figure out current SB clock speed */
-+	if ((hz = sb_clock(sbh)) == 0)
-+		hz = 100000000;
-+	ns = 1000000000 / hz;
-+
-+	/* Setup external interface timing */
-+	if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
-+		/* Initialize extif so we can get to the LEDs and external UART */
-+		W_REG(osh, &eir->prog_config, CF_EN);
-+
-+		/* Set timing for the flash */
-+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
-+		tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
-+		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
-+		W_REG(osh, &eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
-+
-+		/* Set programmable interface timing for external uart */
-+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
-+		tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
-+		tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
-+		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
-+		W_REG(osh, &eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
-+	} else if ((cc = sb_setcore(sbh, SB_CC, 0))) {
-+		/* Set timing for the flash */
-+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
-+		tmp |= CEIL(10, ns) << FW_W1_SHIFT;	/* W1 = 10nS */
-+		tmp |= CEIL(120, ns);			/* W0 = 120nS */
-+		if ((sb_corerev(sbh) < 9) ||
-+			(BCMINIT(sb_chip)(sbh) == 0x5365))
-+			W_REG(osh, &cc->flash_waitcount, tmp);
-+
-+		if ((sb_corerev(sbh) < 9) ||
-+		    ((sb_chip(sbh) == BCM5350_CHIP_ID) && sb_chiprev(sbh) == 0) ||
-+			(BCMINIT(sb_chip)(sbh) == 0x5365)) {
-+			W_REG(osh, &cc->pcmcia_memwait, tmp);
-+		}
-+
-+		/* Save shared IRQ mapping base */
-+		shirq_map_base = shirqmap;
-+	}
-+
-+	/* Chip specific initialization */
-+	switch (sb_chip(sbh)) {
-+	case BCM4710_CHIP_ID:
-+		/* Clear interrupt map */
-+		for (irq = 0; irq <= 4; irq++)
-+			sb_clearirq(sbh, irq);
-+		sb_setirq(sbh, 0, SB_CODEC, 0);
-+		sb_setirq(sbh, 0, SB_EXTIF, 0);
-+		sb_setirq(sbh, 2, SB_ENET, 1);
-+		sb_setirq(sbh, 3, SB_ILINE20, 0);
-+		sb_setirq(sbh, 4, SB_PCI, 0);
-+		ASSERT(eir);
-+		value = nvram_get("et0phyaddr");
-+		if (value && !strcmp(value, "31")) {
-+			/* Enable internal UART */
-+			W_REG(osh, &eir->corecontrol, CC_UE);
-+			/* Give USB its own interrupt */
-+			sb_setirq(sbh, 1, SB_USB, 0);
-+		} else {
-+			/* Disable internal UART */
-+			W_REG(osh, &eir->corecontrol, 0);
-+			/* Give Ethernet its own interrupt */
-+			sb_setirq(sbh, 1, SB_ENET, 0);
-+			sb_setirq(sbh, 0, SB_USB, 0);
-+		}
-+		break;
-+	case BCM5350_CHIP_ID:
-+		/* Clear interrupt map */
-+		for (irq = 0; irq <= 4; irq++)
-+			sb_clearirq(sbh, irq);
-+		sb_setirq(sbh, 0, SB_CC, 0);
-+		sb_setirq(sbh, 0, SB_MIPS33, 0);
-+		sb_setirq(sbh, 1, SB_D11, 0);
-+		sb_setirq(sbh, 2, SB_ENET, 0);
-+		sb_setirq(sbh, 3, SB_PCI, 0);
-+		sb_setirq(sbh, 4, SB_USB, 0);
-+		break;
-+	case BCM4785_CHIP_ID:
-+		/* Reassign PCI to irq 4 */
-+		sb_setirq(sbh, 4, SB_PCI, 0);
-+		break;
-+	}
-+}
-+
-+uint32
-+BCMINITFN(sb_cpu_clock)(sb_t *sbh)
-+{
-+	extifregs_t *eir;
-+	chipcregs_t *cc;
-+	uint32 n, m;
-+	uint idx;
-+	uint32 pll_type, rate = 0;
-+
-+	/* get index of the current core */
-+	idx = sb_coreidx(sbh);
-+	pll_type = PLL_TYPE1;
-+
-+	/* switch to extif or chipc core */
-+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+		n = R_REG(osh, &eir->clockcontrol_n);
-+		m = R_REG(osh, &eir->clockcontrol_sb);
-+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+		pll_type = R_REG(osh, &cc->capabilities) & CAP_PLL_MASK;
-+		n = R_REG(osh, &cc->clockcontrol_n);
-+		if ((pll_type == PLL_TYPE2) ||
-+		    (pll_type == PLL_TYPE4) ||
-+		    (pll_type == PLL_TYPE6) ||
-+		    (pll_type == PLL_TYPE7))
-+			m = R_REG(osh, &cc->clockcontrol_m3);
-+		else if (pll_type == PLL_TYPE5) {
-+			rate = 200000000;
-+			goto out;
-+		}
-+		else if (pll_type == PLL_TYPE3) {
-+			if (sb_chip(sbh) == BCM5365_CHIP_ID) {
-+				rate = 200000000;
-+				goto out;
-+			}
-+			/* 5350 uses m2 to control mips */
-+			else
-+				m = R_REG(osh, &cc->clockcontrol_m2);
-+		} else
-+			m = R_REG(osh, &cc->clockcontrol_sb);
-+	} else
-+		goto out;
-+
-+
-+	/* calculate rate */
-+	if (BCMINIT(sb_chip)(sbh) == 0x5365)
-+		rate = 100000000;
-+	else
-+		rate = sb_clock_rate(pll_type, n, m);
-+
-+	if (pll_type == PLL_TYPE6)
-+		rate = SB2MIPS_T6(rate);
-+
-+out:
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
-+
-+	return rate;
-+}
-+
-+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
-+
-+static void
-+BCMINITFN(handler)(void)
-+{
-+	__asm__(
-+		".set\tmips32\n\t"
-+		"ssnop\n\t"
-+		"ssnop\n\t"
-+	/* Disable interrupts */
-+	/*	MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */
-+		"mfc0 $15, $12\n\t"
-+	/* Just a Hack to not to use reg 'at' which was causing problems on 4704 A2 */
-+		"li $14, -31746\n\t"
-+		"and $15, $15, $14\n\t"
-+		"mtc0 $15, $12\n\t"
-+		"eret\n\t"
-+		"nop\n\t"
-+		"nop\n\t"
-+		".set\tmips0");
-+}
-+
-+/* The following MUST come right after handler() */
-+static void
-+BCMINITFN(afterhandler)(void)
-+{
-+}
-+
-+/*
-+ * Set the MIPS, backplane and PCI clocks as closely as possible.
-+ *
-+ * MIPS clocks synchronization function has been moved from PLL in chipcommon
-+ * core rev. 15 to a DLL inside the MIPS core in 4785.
-+ */
-+bool
-+BCMINITFN(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock)
-+{
-+	extifregs_t *eir = NULL;
-+	chipcregs_t *cc = NULL;
-+	mipsregs_t *mipsr = NULL;
-+	volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci, *clockcontrol_m2;
-+	uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, orig_ratio_cfg;
-+	uint32 pll_type, sync_mode;
-+	uint ic_size, ic_lsize;
-+	uint idx, i;
-+
-+	/* PLL configuration: type 1 */
-+	typedef struct {
-+		uint32 mipsclock;
-+		uint16 n;
-+		uint32 sb;
-+		uint32 pci33;
-+		uint32 pci25;
-+	} n3m_table_t;
-+	static n3m_table_t BCMINITDATA(type1_table)[] = {
-+		/* 96.000 32.000 24.000 */
-+		{ 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 },
-+		/* 100.000 33.333 25.000 */
-+		{ 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 },
-+		/* 104.000 31.200 24.960 */
-+		{ 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 },
-+		/* 108.000 32.400 24.923 */
-+		{ 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 },
-+		/* 112.000 32.000 24.889 */
-+		{ 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 },
-+		/* 115.200 32.000 24.000 */
-+		{ 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 },
-+		/* 120.000 30.000 24.000 */
-+		{ 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 },
-+		/* 124.800 31.200 24.960 */
-+		{ 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 },
-+		/* 128.000 32.000 24.000 */
-+		{ 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 },
-+		/* 132.000 33.000 24.750 */
-+		{ 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 },
-+		/* 136.000 32.640 24.727 */
-+		{ 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 },
-+		/* 140.000 30.000 24.706 */
-+		{ 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 },
-+		/* 144.000 30.857 24.686 */
-+		{ 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 },
-+		/* 150.857 33.000 24.000 */
-+		{ 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 },
-+		/* 152.000 32.571 24.000 */
-+		{ 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 },
-+		/* 156.000 31.200 24.960 */
-+		{ 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 },
-+		/* 160.000 32.000 24.000 */
-+		{ 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 },
-+		/* 163.200 32.640 24.727 */
-+		{ 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 },
-+		/* 168.000 32.000 24.889 */
-+		{ 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 },
-+		/* 176.000 33.000 24.000 */
-+		{ 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 },
-+		};
-+
-+	/* PLL configuration: type 3 */
-+	typedef struct {
-+		uint32 mipsclock;
-+		uint16 n;
-+		uint32 m2; /* that is the clockcontrol_m2 */
-+	} type3_table_t;
-+	static type3_table_t type3_table[] = {
-+		/* for 5350, mips clock is always double sb clock */
-+		{ 150000000, 0x311, 0x4020005 },
-+		{ 200000000, 0x311, 0x4020003 },
-+		};
-+
-+	/* PLL configuration: type 2, 4, 7 */
-+	typedef struct {
-+		uint32 mipsclock;
-+		uint32 sbclock;
-+		uint16 n;
-+		uint32 sb;
-+		uint32 pci33;
-+		uint32 m2;
-+		uint32 m3;
-+		uint32 ratio_cfg;
-+		uint32 ratio_parm;
-+		uint32 d11_r1;
-+		uint32 d11_r2;
-+	} n4m_table_t;
-+	static n4m_table_t BCMINITDATA(type2_table)[] = {
-+		{ 120000000, 60000000, 0x0303, 0x01000200, 0x01000600, 0x01000200, 0x05000200, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 150000000, 75000000, 0x0303, 0x01000100, 0x01000600, 0x01000100, 0x05000100, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 8,
-+		0x012a00a9, 9 /* ratio  4/9 */, 0x012a00a9 },
-+		{ 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 200000000, 100000000, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 8,
-+		0x012a00a9, 9 /* ratio  4/9 */, 0x012a00a9 },
-+		{ 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8,
-+		0x012a00a9, 9 /* ratio  4/9 */, 0x012a00a9 },
-+		{ 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8,
-+		0x012a00a9, 9 /* ratio  4/9 */, 0x012a00a9 },
-+		{ 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8,
-+		0x012a00a9, 9 /* ratio  4/9 */, 0x012a00a9 },
-+		{ 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01010100, 0x05000100, 8,
-+		0x012a00a9, 9 /* ratio  4/9 */, 0x012a00a9 },
-+		{ 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01010100, 0x05000100, 11,
-+		0x0aaa0555, 8 /* ratio  4/8 */, 0x00aa0055 },
-+		{ 330000000, 132000000, 0x0903, 0x01000200, 0x00020200, 0x01010100, 0x05000100, 0,
-+		0, 10 /* ratio 4/10 */, 0x02520129 },
-+		{ 330000000, 146666666, 0x0903, 0x01010000, 0x00020200, 0x01010100, 0x05000100, 0,
-+		0, 9 /* ratio 4/9 */, 0x012a00a9 },
-+		{ 330000000, 165000000, 0x0903, 0x01000100, 0x00020200, 0x01010100, 0x05000100, 0,
-+		0, 8 /* ratio 4/8 */, 0x00aa0055 },
-+		{ 360000000, 120000000, 0x0a03, 0x01000300, 0x00010201, 0x01010200, 0x05000100, 0,
-+		0, 12 /* ratio 4/12 */, 0x04920492 },
-+		{ 360000000, 144000000, 0x0a03, 0x01000200, 0x00010201, 0x01010200, 0x05000100, 0,
-+		0, 10 /* ratio 4/10 */, 0x02520129 },
-+		{ 360000000, 160000000, 0x0a03, 0x01010000, 0x00010201, 0x01010200, 0x05000100, 0,
-+		0, 9 /* ratio 4/9 */, 0x012a00a9 },
-+		{ 360000000, 180000000, 0x0a03, 0x01000100, 0x00010201, 0x01010200, 0x05000100, 0,
-+		0, 8 /* ratio 4/8 */, 0x00aa0055 },
-+		{ 390000000, 130000000, 0x0b03, 0x01010100, 0x00020101, 0x01020100, 0x05000100, 0,
-+		0, 12 /* ratio 4/12 */, 0x04920492 },
-+		{ 390000000, 156000000, 0x0b03, 0x01000200, 0x00020101, 0x01020100, 0x05000100, 0,
-+		0, 10 /* ratio 4/10 */, 0x02520129 },
-+		{ 390000000, 173000000, 0x0b03, 0x01010000, 0x00020101, 0x01020100, 0x05000100, 0,
-+		0, 9 /* ratio 4/9 */, 0x012a00a9 },
-+		{ 390000000, 195000000, 0x0b03, 0x01000100, 0x00020101, 0x01020100, 0x05000100, 0,
-+		0, 8 /* ratio 4/8 */, 0x00aa0055 },
-+	};
-+	static n4m_table_t BCMINITDATA(type4_table)[] = {
-+		{ 120000000, 60000000, 0x0009, 0x11020009, 0x01030203, 0x11020009, 0x04000009, 11,
-+		0x0aaa0555 },
-+		{ 150000000, 75000000, 0x0009, 0x11050002, 0x01030203, 0x11050002, 0x04000005, 11,
-+		0x0aaa0555 },
-+		{ 192000000, 96000000, 0x0702, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11,
-+		0x0aaa0555 },
-+		{ 198000000, 99000000, 0x0603, 0x11020005, 0x11030011, 0x11020005, 0x04000005, 11,
-+		0x0aaa0555 },
-+		{ 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11,
-+		0x0aaa0555 },
-+		{ 204000000, 102000000, 0x0c02, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11,
-+		0x0aaa0555 },
-+		{ 208000000, 104000000, 0x0802, 0x11030002, 0x11090005, 0x11030002, 0x04000003, 11,
-+		0x0aaa0555 },
-+		{ 210000000, 105000000, 0x0209, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11,
-+		0x0aaa0555 },
-+		{ 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11,
-+		0x0aaa0555 },
-+		{ 224000000, 112000000, 0x0205, 0x11030002, 0x02002103, 0x11030002, 0x04000003, 11,
-+		0x0aaa0555 },
-+		{ 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x01030305, 0x04000005, 8,
-+		0x012a00a9 },
-+		{ 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11,
-+		0x0aaa0555 },
-+		{ 240000000, 102857143, 0x0109, 0x04000021, 0x01050203, 0x11030021, 0x04000003, 13,
-+		0x254a14a9 },
-+		{ 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 11,
-+		0x0aaa0555 },
-+		{ 252000000, 100800000, 0x0203, 0x04000009, 0x11050005, 0x02000209, 0x04000002, 9,
-+		0x02520129 },
-+		{ 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11,
-+		0x0aaa0555 },
-+		{ 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11,
-+		0x0aaa0555 },
-+		{ 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 13,
-+		0x254a14a9 },
-+		{ 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13,
-+		0x254a14a9 },
-+		{ 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13,
-+		0x254a14a9 },
-+		{ 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 9,
-+		0x02520129 },
-+		{ 300000000, 150000000, 0x0009, 0x04000005, 0x01030203, 0x04000005, 0x04000002, 11,
-+		0x0aaa0555 }
-+	};
-+	static n4m_table_t BCMINITDATA(type7_table)[] = {
-+		{ 183333333, 91666666, 0x0605, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11,
-+		0x0aaa0555 },
-+		{ 187500000, 93750000, 0x0a03, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11,
-+		0x0aaa0555 },
-+		{ 196875000, 98437500, 0x1003, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11,
-+		0x0aaa0555 },
-+		{ 200000000, 100000000, 0x0311, 0x04000011, 0x11030011, 0x04000009, 0x04000003, 11,
-+		0x0aaa0555 },
-+		{ 200000000, 100000000, 0x0311, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11,
-+		0x0aaa0555 },
-+		{ 206250000, 103125000, 0x1103, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11,
-+		0x0aaa0555 },
-+		{ 212500000, 106250000, 0x0c05, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11,
-+		0x0aaa0555 },
-+		{ 215625000, 107812500, 0x1203, 0x11090009, 0x11050005, 0x11020005, 0x04000005, 11,
-+		0x0aaa0555 },
-+		{ 216666666, 108333333, 0x0805, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11,
-+		0x0aaa0555 },
-+		{ 225000000, 112500000, 0x0d03, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11,
-+		0x0aaa0555 },
-+		{ 233333333, 116666666, 0x0905, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11,
-+		0x0aaa0555 },
-+		{ 237500000, 118750000, 0x0e05, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11,
-+		0x0aaa0555 },
-+		{ 240000000, 120000000, 0x0b11, 0x11020009, 0x11210009, 0x11020009, 0x04000009, 11,
-+		0x0aaa0555 },
-+		{ 250000000, 125000000, 0x0f03, 0x11020003, 0x11210003, 0x11020003, 0x04000003, 11,
-+		0x0aaa0555 }
-+	};
-+
-+	ulong start, end, dst;
-+	bool ret = FALSE;
-+
-+	volatile uint32 *dll_ctrl = (volatile uint32 *)0xff400008;
-+	volatile uint32 *dll_r1 = (volatile uint32 *)0xff400010;
-+	volatile uint32 *dll_r2 = (volatile uint32 *)0xff400018;
-+
-+	/* get index of the current core */
-+	idx = sb_coreidx(sbh);
-+	clockcontrol_m2 = NULL;
-+
-+	/* switch to extif or chipc core */
-+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+		pll_type = PLL_TYPE1;
-+		clockcontrol_n = &eir->clockcontrol_n;
-+		clockcontrol_sb = &eir->clockcontrol_sb;
-+		clockcontrol_pci = &eir->clockcontrol_pci;
-+		clockcontrol_m2 = &cc->clockcontrol_m2;
-+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+		pll_type = R_REG(osh, &cc->capabilities) & CAP_PLL_MASK;
-+		if (pll_type == PLL_TYPE6) {
-+			clockcontrol_n = NULL;
-+			clockcontrol_sb = NULL;
-+			clockcontrol_pci = NULL;
-+		} else {
-+			clockcontrol_n = &cc->clockcontrol_n;
-+			clockcontrol_sb = &cc->clockcontrol_sb;
-+			clockcontrol_pci = &cc->clockcontrol_pci;
-+			clockcontrol_m2 = &cc->clockcontrol_m2;
-+		}
-+	} else
-+		goto done;
-+
-+	if (pll_type == PLL_TYPE6) {
-+		/* Silence compilers */
-+		orig_n = orig_sb = orig_pci = 0;
-+	} else {
-+		/* Store the current clock register values */
-+		orig_n = R_REG(osh, clockcontrol_n);
-+		orig_sb = R_REG(osh, clockcontrol_sb);
-+		orig_pci = R_REG(osh, clockcontrol_pci);
-+	}
-+
-+	if (pll_type == PLL_TYPE1) {
-+		/* Keep the current PCI clock if not specified */
-+		if (pciclock == 0) {
-+			pciclock = sb_clock_rate(pll_type, R_REG(osh, clockcontrol_n),
-+			                         R_REG(osh, clockcontrol_pci));
-+			pciclock = (pciclock <= 25000000) ? 25000000 : 33000000;
-+		}
-+
-+		/* Search for the closest MIPS clock less than or equal to a preferred value */
-+		for (i = 0; i < ARRAYSIZE(type1_table); i++) {
-+			ASSERT(type1_table[i].mipsclock ==
-+			       sb_clock_rate(pll_type, type1_table[i].n,
-+			       type1_table[i].sb));
-+			if (type1_table[i].mipsclock > mipsclock)
-+				break;
-+		}
-+		if (i == 0) {
-+			ret = FALSE;
-+			goto done;
-+		} else {
-+			ret = TRUE;
-+			i--;
-+		}
-+		ASSERT(type1_table[i].mipsclock <= mipsclock);
-+
-+		/* No PLL change */
-+		if ((orig_n == type1_table[i].n) &&
-+		    (orig_sb == type1_table[i].sb) &&
-+		    (orig_pci == type1_table[i].pci33))
-+			goto done;
-+
-+		/* Set the PLL controls */
-+		W_REG(osh, clockcontrol_n, type1_table[i].n);
-+		W_REG(osh, clockcontrol_sb, type1_table[i].sb);
-+		if (pciclock == 25000000)
-+			W_REG(osh, clockcontrol_pci, type1_table[i].pci25);
-+		else
-+			W_REG(osh, clockcontrol_pci, type1_table[i].pci33);
-+
-+		/* Reset */
-+		sb_watchdog(sbh, 1);
-+		while (1);
-+	} else if (pll_type == PLL_TYPE3) {
-+		/* 5350 */
-+		if (sb_chip(sbh) != BCM5365_CHIP_ID) {
-+			/*
-+			 * Search for the closest MIPS clock less than or equal to
-+			 * a preferred value.
-+			 */
-+			for (i = 0; i < ARRAYSIZE(type3_table); i++) {
-+				if (type3_table[i].mipsclock > mipsclock)
-+					break;
-+			}
-+			if (i == 0) {
-+				ret = FALSE;
-+				goto done;
-+			} else {
-+				ret = TRUE;
-+				i--;
-+			}
-+			ASSERT(type3_table[i].mipsclock <= mipsclock);
-+
-+			/* No PLL change */
-+			orig_m2 = R_REG(osh, &cc->clockcontrol_m2);
-+			if ((orig_n == type3_table[i].n) &&
-+			    (orig_m2 == type3_table[i].m2)) {
-+				goto done;
-+			}
-+
-+			/* Set the PLL controls */
-+			W_REG(osh, clockcontrol_n, type3_table[i].n);
-+			W_REG(osh, clockcontrol_m2, type3_table[i].m2);
-+
-+			/* Reset */
-+			sb_watchdog(sbh, 1);
-+			while (1);
-+		}
-+	} else if ((pll_type == PLL_TYPE2) ||
-+	           (pll_type == PLL_TYPE4) ||
-+	           (pll_type == PLL_TYPE6) ||
-+	           (pll_type == PLL_TYPE7)) {
-+		n4m_table_t *table = NULL, *te;
-+		uint tabsz = 0;
-+
-+		ASSERT(cc);
-+
-+		orig_mips = R_REG(osh, &cc->clockcontrol_m3);
-+
-+		switch (pll_type) {
-+		case PLL_TYPE6: {
-+			uint32 new_mips = 0;
-+
-+			ret = TRUE;
-+			if (mipsclock <= SB2MIPS_T6(CC_T6_M1))
-+				new_mips = CC_T6_MMASK;
-+
-+			if (orig_mips == new_mips)
-+				goto done;
-+
-+			W_REG(osh, &cc->clockcontrol_m3, new_mips);
-+			goto end_fill;
-+		}
-+		case PLL_TYPE2:
-+			table = type2_table;
-+			tabsz = ARRAYSIZE(type2_table);
-+			break;
-+		case PLL_TYPE4:
-+			table = type4_table;
-+			tabsz = ARRAYSIZE(type4_table);
-+			break;
-+		case PLL_TYPE7:
-+			table = type7_table;
-+			tabsz = ARRAYSIZE(type7_table);
-+			break;
-+		default:
-+			ASSERT("No table for plltype" == NULL);
-+			break;
-+		}
-+
-+		/* Store the current clock register values */
-+		orig_m2 = R_REG(osh, &cc->clockcontrol_m2);
-+		orig_ratio_parm = 0;
-+		orig_ratio_cfg = 0;
-+
-+		/* Look up current ratio */
-+		for (i = 0; i < tabsz; i++) {
-+			if ((orig_n == table[i].n) &&
-+			    (orig_sb == table[i].sb) &&
-+			    (orig_pci == table[i].pci33) &&
-+			    (orig_m2 == table[i].m2) &&
-+			    (orig_mips == table[i].m3)) {
-+				orig_ratio_parm = table[i].ratio_parm;
-+				orig_ratio_cfg = table[i].ratio_cfg;
-+				break;
-+			}
-+		}
-+
-+		/* Search for the closest MIPS clock greater or equal to a preferred value */
-+		for (i = 0; i < tabsz; i++) {
-+			ASSERT(table[i].mipsclock ==
-+			       sb_clock_rate(pll_type, table[i].n, table[i].m3));
-+			if ((mipsclock <= table[i].mipsclock) &&
-+			    ((sbclock == 0) || (sbclock <= table[i].sbclock)))
-+				break;
-+		}
-+		if (i == tabsz) {
-+			ret = FALSE;
-+			goto done;
-+		} else {
-+			te = &table[i];
-+			ret = TRUE;
-+		}
-+
-+		/* No PLL change */
-+		if ((orig_n == te->n) &&
-+		    (orig_sb == te->sb) &&
-+		    (orig_pci == te->pci33) &&
-+		    (orig_m2 == te->m2) &&
-+		    (orig_mips == te->m3))
-+			goto done;
-+
-+		/* Set the PLL controls */
-+		W_REG(osh, clockcontrol_n, te->n);
-+		W_REG(osh, clockcontrol_sb, te->sb);
-+		W_REG(osh, clockcontrol_pci, te->pci33);
-+		W_REG(osh, &cc->clockcontrol_m2, te->m2);
-+		W_REG(osh, &cc->clockcontrol_m3, te->m3);
-+
-+		/* Set the chipcontrol bit to change mipsref to the backplane divider if needed */
-+		if ((pll_type == PLL_TYPE7) && (te->sb != te->m2) &&
-+		    (sb_clock_rate(pll_type, te->n, te->m2) == 120000000))
-+			W_REG(osh, &cc->chipcontrol,
-+			      R_REG(osh, &cc->chipcontrol) | 0x100);
-+
-+		/* No ratio change */
-+		if (sb_chip(sbh) != BCM4785_CHIP_ID) {
-+			if (orig_ratio_parm == te->ratio_parm)
-+				goto end_fill;
-+		}
-+
-+		/* Preload the code into the cache */
-+		icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize);
-+		if (sb_chip(sbh) == BCM4785_CHIP_ID) {
-+			start = ((ulong) &&start_fill_4785) & ~(ic_lsize - 1);
-+			end = ((ulong) &&end_fill_4785 + (ic_lsize - 1)) & ~(ic_lsize - 1);
-+		}
-+		else {
-+			start = ((ulong) &&start_fill) & ~(ic_lsize - 1);
-+			end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1);
-+		}
-+		while (start < end) {
-+			cache_op(start, Fill_I);
-+			start += ic_lsize;
-+		}
-+
-+		/* Copy the handler */
-+		start = (ulong) &handler;
-+		end = (ulong) &afterhandler;
-+		dst = KSEG1ADDR(0x180);
-+		for (i = 0; i < (end - start); i += 4)
-+			*((ulong *)(dst + i)) = *((ulong *)(start + i));
-+
-+		/* Preload the handler into the cache one line at a time */
-+		for (i = 0; i < (end - start); i += ic_lsize)
-+			cache_op(dst + i, Fill_I);
-+
-+		/* Clear BEV bit */
-+		MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV);
-+
-+		/* Enable interrupts */
-+		MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE));
-+
-+		/* 4785 clock freq change procedures */
-+		if (sb_chip(sbh) == BCM4785_CHIP_ID) {
-+	start_fill_4785:
-+			/* Switch to async */
-+			MTC0(C0_BROADCOM, 4, (1 << 22));
-+
-+			/* Set clock ratio in MIPS */
-+			*dll_r1 = (*dll_r1 & 0xfffffff0) | (te->d11_r1 - 1);
-+			*dll_r2 = te->d11_r2;
-+
-+			/* Enable new settings in MIPS */
-+			*dll_r1 = *dll_r1 | 0xc0000000;
-+
-+			/* Set active cfg */
-+			MTC0(C0_BROADCOM, 2, MFC0(C0_BROADCOM, 2) | (1 << 3) | 1);
-+
-+			/* Fake soft reset (clock cfg registers not reset) */
-+			MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | (1 << 2));
-+
-+			/* Clear active cfg */
-+			MTC0(C0_BROADCOM, 2, MFC0(C0_BROADCOM, 2) & ~(1 << 3));
-+
-+			/* set watchdog timer */
-+			W_REG(osh, &cc->watchdog, 20);
-+			(void) R_REG(osh, &cc->chipid);
-+
-+			/* wait for timer interrupt */
-+			__asm__ __volatile__(
-+				".set\tmips3\n\t"
-+				"sync\n\t"
-+				"wait\n\t"
-+				".set\tmips0");
-+	end_fill_4785:
-+			while (1);
-+		}
-+		/* Generic clock freq change procedures */
-+		else {
-+			/* Enable MIPS timer interrupt */
-+			if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) &&
-+			    !(mipsr = sb_setcore(sbh, SB_MIPS33, 0)))
-+				ASSERT(mipsr);
-+			W_REG(osh, &mipsr->intmask, 1);
-+
-+	start_fill:
-+			/* step 1, set clock ratios */
-+			MTC0(C0_BROADCOM, 3, te->ratio_parm);
-+			MTC0(C0_BROADCOM, 1, te->ratio_cfg);
-+
-+			/* step 2: program timer intr */
-+			W_REG(osh, &mipsr->timer, 100);
-+			(void) R_REG(osh, &mipsr->timer);
-+
-+			/* step 3, switch to async */
-+			sync_mode = MFC0(C0_BROADCOM, 4);
-+			MTC0(C0_BROADCOM, 4, 1 << 22);
-+
-+			/* step 4, set cfg active */
-+			MTC0(C0_BROADCOM, 2, (1 << 3) | 1);
-+
-+			/* steps 5 & 6 */
-+			__asm__ __volatile__(
-+				".set\tmips3\n\t"
-+				"wait\n\t"
-+				".set\tmips0");
-+
-+			/* step 7, clear cfg active */
-+			MTC0(C0_BROADCOM, 2, 0);
-+
-+			/* Additional Step: set back to orig sync mode */
-+			MTC0(C0_BROADCOM, 4, sync_mode);
-+
-+			/* step 8, fake soft reset */
-+			MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | (1 << 2));
-+
-+	end_fill:
-+			/* set watchdog timer */
-+			W_REG(osh, &cc->watchdog, 20);
-+			(void) R_REG(osh, &cc->chipid);
-+
-+			/* wait for timer interrupt */
-+			__asm__ __volatile__(
-+				".set\tmips3\n\t"
-+				"sync\n\t"
-+				"wait\n\t"
-+				".set\tmips0");
-+			while (1);
-+		}
-+	}
-+
-+done:
-+	/* Enable 4785 DLL */
-+	if (sb_chip(sbh) == BCM4785_CHIP_ID) {
-+		uint32 tmp;
-+
-+		/* set mask to 1e, enable DLL (bit 0) */
-+		*dll_ctrl |= 0x0041e021;
-+
-+		/* enable aggressive hardware mode */
-+		*dll_ctrl |= 0x00000080;
-+
-+		/* wait for lock flag to clear */
-+		while ((*dll_ctrl & 0x2) == 0);
-+
-+		/* clear sticky flags (clear on write 1) */
-+		tmp = *dll_ctrl;
-+		*dll_ctrl = tmp;
-+
-+		/* set mask to 5b'10001 */
-+		*dll_ctrl = (*dll_ctrl & 0xfffc1fff) | 0x00022000;
-+
-+		/* enable sync mode */
-+		MTC0(C0_BROADCOM, 4, MFC0(C0_BROADCOM, 4) & 0xfe3fffff);
-+		(void)MFC0(C0_BROADCOM, 4);
-+	}
-+
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
-+
-+	return ret;
-+}
-+
-+void
-+BCMINITFN(enable_pfc)(uint32 mode)
-+{
-+	ulong start, end;
-+	uint ic_size, ic_lsize;
-+
-+	/* If auto then choose the correct mode for this
-+	 * platform, currently we only ever select one mode
-+	 */
-+	if (mode == PFC_AUTO)
-+		mode = PFC_INST;
-+
-+	icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize);
-+
-+	/* enable prefetch cache if available */
-+	if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) {
-+		start = ((ulong) &&setpfc_start) & ~(ic_lsize - 1);
-+		end = ((ulong) &&setpfc_end + (ic_lsize - 1)) & ~(ic_lsize - 1);
-+
-+		/* Preload setpfc code into the cache one line at a time */
-+		while (start < end) {
-+			cache_op(start, Fill_I);
-+			start += ic_lsize;
-+		}
-+
-+		/* Now set the pfc */
-+	setpfc_start:
-+		/* write range */
-+		*(volatile uint32 *)PFC_CR1 = 0xffff0000;
-+
-+		/* enable */
-+		*(volatile uint32 *)PFC_CR0 = mode;
-+	setpfc_end:
-+		/* Compiler foder */
-+		ic_size = 0;
-+	}
-+}
-+
-+/* returns the ncdl value to be programmed into sdram_ncdl for calibration */
-+uint32
-+BCMINITFN(sb_memc_get_ncdl)(sb_t *sbh)
-+{
-+	osl_t *osh;
-+	sbmemcregs_t *memc;
-+	uint32 ret = 0;
-+	uint32 config, rd, wr, misc, dqsg, cd, sm, sd;
-+	uint idx, rev;
-+
-+	osh = sb_osh(sbh);
-+
-+	idx = sb_coreidx(sbh);
-+
-+	memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0);
-+	if (memc == 0)
-+		goto out;
-+
-+	rev = sb_corerev(sbh);
-+
-+	config = R_REG(osh, &memc->config);
-+	wr = R_REG(osh, &memc->wrncdlcor);
-+	rd = R_REG(osh, &memc->rdncdlcor);
-+	misc = R_REG(osh, &memc->miscdlyctl);
-+	dqsg = R_REG(osh, &memc->dqsgatencdl);
-+
-+	rd &= MEMC_RDNCDLCOR_RD_MASK;
-+	wr &= MEMC_WRNCDLCOR_WR_MASK;
-+	dqsg &= MEMC_DQSGATENCDL_G_MASK;
-+
-+	if (config & MEMC_CONFIG_DDR) {
-+		ret = (wr << 16) | (rd << 8) | dqsg;
-+	} else {
-+		if (rev > 0)
-+			cd = rd;
-+		else
-+			cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD);
-+		sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT;
-+		sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT;
-+		ret = (sm << 16) | (sd << 8) | cd;
-+	}
-+
-+out:
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
-+
-+	return ret;
-+}
-+
-+#if defined(BCMPERFSTATS)
-+/*
-+ * CP0 Register 25 supports 4 semi-independent 32bit performance counters.
-+ * $25 select 0, 1, 2, and 3 are the counters.  The counters *decrement* (who thought this one up?)
-+ * $25 select 4 and 5 each contain 2-16bit control fields, one for each of the 4 counters
-+ * $25 select 6 is the global perf control register.
-+ */
-+/* enable and start instruction counting */
-+
-+void
-+hndmips_perf_instrcount_enable()
-+{
-+	MTC0(C0_PERFORMANCE, 6, 0x80000200);	/* global enable perf counters */
-+	MTC0(C0_PERFORMANCE, 4,
-+	     0x8044 | MFC0(C0_PERFORMANCE, 4));	/* enable instruction counting for counter 0 */
-+	MTC0(C0_PERFORMANCE, 0, 0);		/* zero counter zero */
-+}
-+
-+/* enable and start I$ hit and I$ miss counting */
-+void
-+hndmips_perf_icachecount_enable(void)
-+{
-+	MTC0(C0_PERFORMANCE, 6, 0x80000218);	/* enable I$ counting */
-+	MTC0(C0_PERFORMANCE, 4, 0x80148018);	/* count I$ hits in cntr 0 and misses in cntr 1 */
-+	MTC0(C0_PERFORMANCE, 0, 0);		/* zero counter 0 - # I$ hits */
-+	MTC0(C0_PERFORMANCE, 1, 0);		/* zero counter 1 - # I$ misses */
-+}
-+
-+/* enable and start D$ hit and I$ miss counting */
-+void
-+hndmips_perf_dcachecount_enable(void)
-+{
-+	MTC0(C0_PERFORMANCE, 6, 0x80000211);	/* enable D$ counting */
-+	MTC0(C0_PERFORMANCE, 4, 0x80248028);	/* count D$ hits in cntr 0 and misses in cntr 1 */
-+	MTC0(C0_PERFORMANCE, 0, 0);		/* zero counter 0 - # D$ hits */
-+	MTC0(C0_PERFORMANCE, 1, 0);		/* zero counter 1 - # D$ misses */
-+}
-+
-+void
-+hndmips_perf_icache_miss_enable()
-+{
-+	MTC0(C0_PERFORMANCE, 4,
-+	     0x80140000 | MFC0(C0_PERFORMANCE, 4)); /* enable cache misses counting for counter 1 */
-+	MTC0(C0_PERFORMANCE, 1, 0); /* zero counter one */
-+}
-+
-+
-+void
-+hndmips_perf_icache_hit_enable()
-+{
-+	MTC0(C0_PERFORMANCE, 5, 0x8018 | MFC0(C0_PERFORMANCE, 5));
-+	/* enable cache hits counting for counter 2 */
-+	MTC0(C0_PERFORMANCE, 2, 0);		/* zero counter 2 */
-+}
-+
-+uint32
-+hndmips_perf_read_instrcount()
-+{
-+	return -(long)(MFC0(C0_PERFORMANCE, 0));
-+}
-+
-+uint32
-+hndmips_perf_read_cache_miss()
-+{
-+	return -(long)(MFC0(C0_PERFORMANCE, 1));
-+}
-+
-+uint32
-+hndmips_perf_read_cache_hit()
-+{
-+	return -(long)(MFC0(C0_PERFORMANCE, 2));
-+}
-+
-+#endif /* BCMINTERNAL | BCMPERFSTATS */
-diff -urN linux.old/arch/mips/bcm947xx/sbpci.c linux.dev/arch/mips/bcm947xx/sbpci.c
---- linux.old/arch/mips/bcm947xx/sbpci.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/sbpci.c	2006-05-02 17:37:13.000000000 +0200
-@@ -0,0 +1,768 @@
-+/*
-+ * Low-Level PCI and SB support for BCM47xx
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: hndpci.c,v 1.1.1.3 2006/04/08 06:13:39 honor Exp $
-+ */
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <pcicfg.h>
-+#include <bcmdevs.h>
-+#include <sbconfig.h>
-+#include <bcmutils.h>
-+#include <sbutils.h>
-+#include <sbpci.h>
-+#include <bcmendian.h>
-+#include <bcmnvram.h>
-+#include <hndcpu.h>
-+#include <hndmips.h>
-+#include <hndpci.h>
-+
-+/* debug/trace */
-+#ifdef BCMDBG_PCI
-+#define	PCI_MSG(args)	printf args
-+#else
-+#define	PCI_MSG(args)
-+#endif	/* BCMDBG_PCI */
-+
-+/* Can free sbpci_init() memory after boot */
-+#ifndef linux
-+#define __init
-+#endif /* linux */
-+
-+/* Emulated configuration space */
-+typedef struct {
-+	int	n;
-+	uint	size0;
-+	uint	size1;
-+	uint	size2;
-+	uint	size3;
-+} sb_bar_cfg_t;
-+static pci_config_regs sb_config_regs[SB_MAXCORES];
-+static sb_bar_cfg_t sb_bar_cfg[SB_MAXCORES];
-+
-+/* Links to emulated and real PCI configuration spaces */
-+#define MAXFUNCS  2
-+typedef struct {
-+	pci_config_regs *emu;	/* emulated PCI config */
-+	pci_config_regs *pci;	/* real PCI config */
-+	sb_bar_cfg_t *bar;	/* region sizes */
-+} sb_pci_cfg_t;
-+static sb_pci_cfg_t sb_pci_cfg[SB_MAXCORES][MAXFUNCS];
-+
-+/* Special emulated config space for non-existing device */
-+static pci_config_regs sb_pci_null = { 0xffff, 0xffff };
-+
-+/* Banned cores */
-+static uint16 pci_ban[SB_MAXCORES] = { 0 };
-+static uint pci_banned = 0;
-+
-+/* CardBus mode */
-+static bool cardbus = FALSE;
-+
-+/* Disable PCI host core */
-+static bool pci_disabled = FALSE;
-+
-+/* Host bridge slot #, default to 0 */
-+static uint8 pci_hbslot = 0;
-+
-+/* Internal macros */
-+#define PCI_SLOTAD_MAP	16	/* SLOT<n> mapps to AD<n+16> */
-+#define PCI_HBSBCFG_REV	8	/* MIN. core rev. required to
-+				 * access host bridge PCI cfg space
-+				 * from SB
-+				 */
-+
-+/*
-+ * Functions for accessing external PCI configuration space
-+ */
-+
-+/* Assume one-hot slot wiring */
-+#define PCI_SLOT_MAX 16	/* Max. PCI Slots */
-+
-+static uint32
-+config_cmd(sb_t *sbh, uint bus, uint dev, uint func, uint off)
-+{
-+	uint coreidx;
-+	sbpciregs_t *regs;
-+	uint32 addr = 0;
-+	osl_t *osh;
-+
-+	/* CardBusMode supports only one device */
-+	if (cardbus && dev > 1)
-+		return 0;
-+
-+	osh = sb_osh(sbh);
-+
-+	coreidx = sb_coreidx(sbh);
-+	regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
-+
-+	/* Type 0 transaction */
-+	if (bus == 1) {
-+		/* Skip unwired slots */
-+		if (dev < PCI_SLOT_MAX) {
-+			uint32 win;
-+
-+			/* Slide the PCI window to the appropriate slot */
-+			win = (SBTOPCI_CFG0 | ((1 << (dev + PCI_SLOTAD_MAP)) & SBTOPCI1_MASK));
-+			W_REG(osh, &regs->sbtopci1, win);
-+			addr = SB_PCI_CFG |
-+			        ((1 << (dev + PCI_SLOTAD_MAP)) & ~SBTOPCI1_MASK) |
-+			        (func << PCICFG_FUN_SHIFT) |
-+			        (off & ~3);
-+		}
-+	} else {
-+		/* Type 1 transaction */
-+		W_REG(osh, &regs->sbtopci1, SBTOPCI_CFG1);
-+		addr = SB_PCI_CFG |
-+		        (bus << PCICFG_BUS_SHIFT) |
-+		        (dev << PCICFG_SLOT_SHIFT) |
-+		        (func << PCICFG_FUN_SHIFT) |
-+		        (off & ~3);
-+	}
-+
-+	sb_setcoreidx(sbh, coreidx);
-+
-+	return addr;
-+}
-+
-+/*
-+ * Read host bridge PCI config registers from Silicon Backplane (>=rev8).
-+ *
-+ * It returns TRUE to indicate that access to the host bridge's pci config
-+ * from SB is ok, and values in 'addr' and 'val' are valid.
-+ *
-+ * It can only read registers at multiple of 4-bytes. Callers must pick up
-+ * needed bytes from 'val' based on 'off' value. Value in 'addr' reflects
-+ * the register address where value in 'val' is read.
-+ */
-+static bool
-+sb_pcihb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off,
-+                  uint32 **addr, uint32 *val)
-+{
-+	sbpciregs_t *regs;
-+	osl_t *osh;
-+	uint coreidx;
-+	bool ret = FALSE;
-+
-+	/* sanity check */
-+	ASSERT(bus == 1);
-+	ASSERT(dev == pci_hbslot);
-+	ASSERT(func == 0);
-+
-+	osh = sb_osh(sbh);
-+
-+	/* read pci config when core rev >= 8 */
-+	coreidx = sb_coreidx(sbh);
-+	regs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0);
-+	if (regs && sb_corerev(sbh) >= PCI_HBSBCFG_REV) {
-+		*addr = (uint32 *)&regs->pcicfg[func][off >> 2];
-+		*val = R_REG(osh, *addr);
-+		ret = TRUE;
-+	}
-+	sb_setcoreidx(sbh, coreidx);
-+
-+	return ret;
-+}
-+
-+int
-+extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	uint32 addr = 0, *reg = NULL, val;
-+	int ret = 0;
-+
-+	/*
-+	 * Set value to -1 when:
-+	 *	flag 'pci_disabled' is true;
-+	 *	value of 'addr' is zero;
-+	 *	REG_MAP() fails;
-+	 *	BUSPROBE() fails;
-+	 */
-+	if (pci_disabled)
-+		val = 0xffffffff;
-+	else if (bus == 1 && dev == pci_hbslot && func == 0 &&
-+	         sb_pcihb_read_config(sbh, bus, dev, func, off, &reg, &val))
-+		;
-+	else if (((addr = config_cmd(sbh, bus, dev, func, off)) == 0) ||
-+	         ((reg = (uint32 *)REG_MAP(addr, len)) == 0) ||
-+	         (BUSPROBE(val, reg) != 0))
-+		val = 0xffffffff;
-+
-+	PCI_MSG(("%s: 0x%x <= 0x%p(0x%x), len %d, off 0x%x, buf 0x%p\n",
-+	       __FUNCTION__, val, reg, addr, len, off, buf));
-+
-+	val >>= 8 * (off & 3);
-+	if (len == 4)
-+		*((uint32 *) buf) = val;
-+	else if (len == 2)
-+		*((uint16 *) buf) = (uint16) val;
-+	else if (len == 1)
-+		*((uint8 *) buf) = (uint8) val;
-+	else
-+		ret = -1;
-+
-+	if (reg && addr)
-+		REG_UNMAP(reg);
-+
-+	return ret;
-+}
-+
-+int
-+extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	osl_t *osh;
-+	uint32 addr = 0, *reg = NULL, val;
-+	int ret = 0;
-+
-+	osh = sb_osh(sbh);
-+
-+	/*
-+	 * Ignore write attempt when:
-+	 *	flag 'pci_disabled' is true;
-+	 *	value of 'addr' is zero;
-+	 *	REG_MAP() fails;
-+	 *	BUSPROBE() fails;
-+	 */
-+	if (pci_disabled)
-+		return 0;
-+	else if (bus == 1 && dev == pci_hbslot && func == 0 &&
-+	         sb_pcihb_read_config(sbh, bus, dev, func, off, &reg, &val))
-+		;
-+	else if (((addr = config_cmd(sbh, bus, dev, func, off)) == 0) ||
-+	         ((reg = (uint32 *) REG_MAP(addr, len)) == 0) ||
-+	         (BUSPROBE(val, reg) != 0))
-+		goto done;
-+
-+	if (len == 4)
-+		val = *((uint32 *) buf);
-+	else if (len == 2) {
-+		val &= ~(0xffff << (8 * (off & 3)));
-+		val |= *((uint16 *) buf) << (8 * (off & 3));
-+	} else if (len == 1) {
-+		val &= ~(0xff << (8 * (off & 3)));
-+		val |= *((uint8 *) buf) << (8 * (off & 3));
-+	} else {
-+		ret = -1;
-+		goto done;
-+	}
-+
-+	PCI_MSG(("%s: 0x%x => 0x%p\n", __FUNCTION__, val, reg));
-+
-+	W_REG(osh, reg, val);
-+
-+done:
-+	if (reg && addr)
-+		REG_UNMAP(reg);
-+
-+	return ret;
-+}
-+
-+/*
-+ * Must access emulated PCI configuration at these locations even when
-+ * the real PCI config space exists and is accessible.
-+ *
-+ * PCI_CFG_VID (0x00)
-+ * PCI_CFG_DID (0x02)
-+ * PCI_CFG_PROGIF (0x09)
-+ * PCI_CFG_SUBCL  (0x0a)
-+ * PCI_CFG_BASECL (0x0b)
-+ * PCI_CFG_HDR (0x0e)
-+ * PCI_CFG_INT (0x3c)
-+ * PCI_CFG_PIN (0x3d)
-+ */
-+#define FORCE_EMUCFG(off, len) \
-+	((off == PCI_CFG_VID) || (off == PCI_CFG_DID) || \
-+	 (off == PCI_CFG_PROGIF) || \
-+	 (off == PCI_CFG_SUBCL) || (off == PCI_CFG_BASECL) || \
-+	 (off == PCI_CFG_HDR) || \
-+	 (off == PCI_CFG_INT) || (off == PCI_CFG_PIN))
-+
-+/* Sync the emulation registers and the real PCI config registers. */
-+static void
-+sb_pcid_read_config(sb_t *sbh, uint coreidx, sb_pci_cfg_t *cfg,
-+                    uint off, uint len)
-+{
-+	osl_t *osh;
-+	uint oldidx;
-+
-+	ASSERT(cfg);
-+	ASSERT(cfg->emu);
-+	ASSERT(cfg->pci);
-+
-+	/* decide if real PCI config register access is necessary */
-+	if (FORCE_EMUCFG(off, len))
-+		return;
-+
-+	osh = sb_osh(sbh);
-+
-+	/* access to the real pci config space only when the core is up */
-+	oldidx = sb_coreidx(sbh);
-+	sb_setcoreidx(sbh, coreidx);
-+	if (sb_iscoreup(sbh)) {
-+		if (len == 4)
-+			*(uint32 *)((ulong)cfg->emu + off) =
-+			        htol32(R_REG(osh, (uint32 *)((ulong)cfg->pci + off)));
-+		else if (len == 2)
-+			*(uint16 *)((ulong)cfg->emu + off) =
-+			        htol16(R_REG(osh, (uint16 *)((ulong)cfg->pci + off)));
-+		else if (len == 1)
-+			*(uint8 *)((ulong)cfg->emu + off) =
-+			        R_REG(osh, (uint8 *)((ulong)cfg->pci + off));
-+	}
-+	sb_setcoreidx(sbh, oldidx);
-+}
-+
-+static void
-+sb_pcid_write_config(sb_t *sbh, uint coreidx, sb_pci_cfg_t *cfg,
-+                     uint off, uint len)
-+{
-+	osl_t *osh;
-+	uint oldidx;
-+
-+	ASSERT(cfg);
-+	ASSERT(cfg->emu);
-+	ASSERT(cfg->pci);
-+
-+	osh = sb_osh(sbh);
-+
-+	/* decide if real PCI config register access is necessary */
-+	if (FORCE_EMUCFG(off, len))
-+		return;
-+
-+	/* access to the real pci config space only when the core is up */
-+	oldidx = sb_coreidx(sbh);
-+	sb_setcoreidx(sbh, coreidx);
-+	if (sb_iscoreup(sbh)) {
-+		if (len == 4)
-+			W_REG(osh, (uint32 *)((ulong)cfg->pci + off),
-+			      ltoh32(*(uint32 *)((ulong)cfg->emu + off)));
-+		else if (len == 2)
-+			W_REG(osh, (uint16 *)((ulong)cfg->pci + off),
-+			      ltoh16(*(uint16 *)((ulong)cfg->emu + off)));
-+		else if (len == 1)
-+			W_REG(osh, (uint8 *)((ulong)cfg->pci + off),
-+			      *(uint8 *)((ulong)cfg->emu + off));
-+	}
-+	sb_setcoreidx(sbh, oldidx);
-+}
-+
-+/*
-+ * Functions for accessing translated SB configuration space
-+ */
-+static int
-+sb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	pci_config_regs *cfg;
-+
-+	if (dev >= SB_MAXCORES || func >= MAXFUNCS || (off + len) > sizeof(pci_config_regs))
-+		return -1;
-+	cfg = sb_pci_cfg[dev][func].emu;
-+
-+	ASSERT(ISALIGNED(off, len));
-+	ASSERT(ISALIGNED((uintptr)buf, len));
-+
-+	/* use special config space if the device does not exist */
-+	if (!cfg)
-+		cfg = &sb_pci_null;
-+	/* sync emulation with real PCI config if necessary */
-+	else if (sb_pci_cfg[dev][func].pci)
-+		sb_pcid_read_config(sbh, dev, &sb_pci_cfg[dev][func], off, len);
-+
-+	if (len == 4)
-+		*((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off)));
-+	else if (len == 2)
-+		*((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off)));
-+	else if (len == 1)
-+		*((uint8 *) buf) = *((uint8 *)((ulong) cfg + off));
-+	else
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static int
-+sb_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	uint coreidx;
-+	void *regs;
-+	pci_config_regs *cfg;
-+	osl_t *osh;
-+	sb_bar_cfg_t *bar;
-+
-+	if (dev >= SB_MAXCORES || func >= MAXFUNCS || (off + len) > sizeof(pci_config_regs))
-+		return -1;
-+	cfg = sb_pci_cfg[dev][func].emu;
-+	if (!cfg)
-+		return -1;
-+
-+	ASSERT(ISALIGNED(off, len));
-+	ASSERT(ISALIGNED((uintptr)buf, len));
-+
-+	osh = sb_osh(sbh);
-+
-+	/* Emulate BAR sizing */
-+	if (off >= OFFSETOF(pci_config_regs, base[0]) &&
-+	    off <= OFFSETOF(pci_config_regs, base[3]) &&
-+	    len == 4 && *((uint32 *) buf) == ~0) {
-+		coreidx = sb_coreidx(sbh);
-+		if ((regs = sb_setcoreidx(sbh, dev))) {
-+			bar = sb_pci_cfg[dev][func].bar;
-+			/* Highest numbered address match register */
-+			if (off == OFFSETOF(pci_config_regs, base[0]))
-+				cfg->base[0] = ~(bar->size0 - 1);
-+			else if (off == OFFSETOF(pci_config_regs, base[1]) && bar->n >= 1)
-+				cfg->base[1] = ~(bar->size1 - 1);
-+			else if (off == OFFSETOF(pci_config_regs, base[2]) && bar->n >= 2)
-+				cfg->base[2] = ~(bar->size2 - 1);
-+			else if (off == OFFSETOF(pci_config_regs, base[3]) && bar->n >= 3)
-+				cfg->base[3] = ~(bar->size3 - 1);
-+		}
-+		sb_setcoreidx(sbh, coreidx);
-+	}
-+	else if (len == 4)
-+		*((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf));
-+	else if (len == 2)
-+		*((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf));
-+	else if (len == 1)
-+		*((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf);
-+	else
-+		return -1;
-+
-+	/* sync emulation with real PCI config if necessary */
-+	if (sb_pci_cfg[dev][func].pci)
-+		sb_pcid_write_config(sbh, dev, &sb_pci_cfg[dev][func], off, len);
-+
-+	return 0;
-+}
-+
-+int
-+sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	if (bus == 0)
-+		return sb_read_config(sbh, bus, dev, func, off, buf, len);
-+	else
-+		return extpci_read_config(sbh, bus, dev, func, off, buf, len);
-+}
-+
-+int
-+sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	if (bus == 0)
-+		return sb_write_config(sbh, bus, dev, func, off, buf, len);
-+	else
-+		return extpci_write_config(sbh, bus, dev, func, off, buf, len);
-+}
-+
-+void
-+sbpci_ban(uint16 core)
-+{
-+	if (pci_banned < ARRAYSIZE(pci_ban))
-+		pci_ban[pci_banned++] = core;
-+}
-+
-+/*
-+ * Initiliaze PCI core. Return 0 after a successful initialization.
-+ * Otherwise return -1 to indicate there is no PCI core and return 1
-+ * to indicate PCI core is disabled.
-+ */
-+int __init
-+sbpci_init_pci(sb_t *sbh)
-+{
-+	uint chip, chiprev, chippkg, host;
-+	uint32 boardflags;
-+	sbpciregs_t *pci;
-+	sbconfig_t *sb;
-+	uint32 val;
-+	int ret = 0;
-+	char *hbslot;
-+	osl_t *osh;
-+
-+	chip = sb_chip(sbh);
-+	chiprev = sb_chiprev(sbh);
-+	chippkg = sb_chippkg(sbh);
-+
-+	osh = sb_osh(sbh);
-+
-+	if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) {
-+		printk("PCI: no core\n");
-+		pci_disabled = TRUE;
-+		return -1;
-+	}
-+
-+	if ((chip == 0x4310) && (chiprev == 0))
-+		pci_disabled = TRUE;
-+	
-+	sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF);
-+
-+	boardflags = (uint32) getintvar(NULL, "boardflags");
-+
-+	/*
-+	 * The 200-pin BCM4712 package does not bond out PCI. Even when
-+	 * PCI is bonded out, some boards may leave the pins
-+	 * floating.
-+	 */
-+	if (((chip == BCM4712_CHIP_ID) &&
-+	     ((chippkg == BCM4712SMALL_PKG_ID) ||
-+	      (chippkg == BCM4712MID_PKG_ID))) ||
-+	    (boardflags & BFL_NOPCI))
-+		pci_disabled = TRUE;
-+
-+	/* Enable the core */
-+	sb_core_reset(sbh, 0, 0);
-+
-+	/*
-+	 * If the PCI core should not be touched (disabled, not bonded
-+	 * out, or pins floating), do not even attempt to access core
-+	 * registers. Otherwise, try to determine if it is in host
-+	 * mode.
-+	 */
-+	if (pci_disabled)
-+		host = 0;
-+	else
-+		host = !BUSPROBE(val, &pci->control);
-+
-+	if (!host) {
-+		ret = 1;
-+
-+		/* Disable PCI interrupts in client mode */
-+		W_REG(osh, &sb->sbintvec, 0);
-+
-+		/* Disable the PCI bridge in client mode */
-+		sbpci_ban(SB_PCI);
-+		sb_core_disable(sbh, 0);
-+
-+		printk("PCI: Disabled\n");
-+	} else {
-+		printk("PCI: Initializing host\n");
-+
-+		/* Disable PCI SBReqeustTimeout for BCM4785 */
-+		if (chip == BCM4785_CHIP_ID) {
-+			AND_REG(osh, &sb->sbimconfiglow, ~0x00000070);
-+			sb_commit(sbh);
-+		}
-+
-+		/* Reset the external PCI bus and enable the clock */
-+		W_REG(osh, &pci->control, 0x5);		/* enable the tristate drivers */
-+		W_REG(osh, &pci->control, 0xd);		/* enable the PCI clock */
-+		OSL_DELAY(150);				/* delay > 100 us */
-+		W_REG(osh, &pci->control, 0xf);		/* deassert PCI reset */
-+		/* Use internal arbiter and park REQ/GRNT at external master 0 */
-+		W_REG(osh, &pci->arbcontrol, PCI_INT_ARB);
-+		OSL_DELAY(1);				/* delay 1 us */
-+		if (sb_corerev(sbh) >= 8) {
-+			val = getintvar(NULL, "parkid");
-+			ASSERT(val <= PCI_PARKID_LAST);
-+			OR_REG(osh, &pci->arbcontrol, val << PCI_PARKID_SHIFT);
-+			OSL_DELAY(1);
-+		}
-+
-+		/* Enable CardBusMode */
-+		cardbus = getintvar(NULL, "cardbus") == 1;
-+		if (cardbus) {
-+			printk("PCI: Enabling CardBus\n");
-+			/* GPIO 1 resets the CardBus device on bcm94710ap */
-+			sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY);
-+			sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY);
-+			W_REG(osh, &pci->sprom[0], R_REG(osh, &pci->sprom[0]) | 0x400);
-+		}
-+
-+		/* 64 MB I/O access window */
-+		W_REG(osh, &pci->sbtopci0, SBTOPCI_IO);
-+		/* 64 MB configuration access window */
-+		W_REG(osh, &pci->sbtopci1, SBTOPCI_CFG0);
-+		/* 1 GB memory access window */
-+		W_REG(osh, &pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA);
-+
-+		/* Host bridge slot # nvram overwrite */
-+		if ((hbslot = nvram_get("pcihbslot"))) {
-+			pci_hbslot = bcm_strtoul(hbslot, NULL, 0);
-+			ASSERT(pci_hbslot < PCI_MAX_DEVICES);
-+		}
-+
-+		/* Enable PCI bridge BAR0 prefetch and burst */
-+		val = 6;
-+		sbpci_write_config(sbh, 1, pci_hbslot, 0, PCI_CFG_CMD, &val, sizeof(val));
-+
-+		/* Enable PCI interrupts */
-+		W_REG(osh, &pci->intmask, PCI_INTA);
-+	}
-+
-+	return ret;
-+}
-+
-+/*
-+ * Get the PCI region address and size information.
-+ */
-+static void __init
-+sbpci_init_regions(sb_t *sbh, uint func, pci_config_regs *cfg, sb_bar_cfg_t *bar)
-+{
-+	osl_t *osh;
-+	uint16 coreid;
-+	void *regs;
-+	sbconfig_t *sb;
-+	uint32 base;
-+
-+	osh	= sb_osh(sbh);
-+	coreid	= sb_coreid(sbh);
-+	regs	= sb_coreregs(sbh);
-+	sb	= (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+	switch (coreid) {
-+	case SB_USB20H:
-+		base = htol32(sb_base(R_REG(osh, &sb->sbadmatch0)));
-+
-+		cfg->base[0] = func == 0 ? base : base + 0x800;  /* OHCI/EHCI */
-+		cfg->base[1] = 0;
-+		cfg->base[2] = 0;
-+		cfg->base[3] = 0;
-+		cfg->base[4] = 0;
-+		cfg->base[5] = 0;
-+		bar->n       = 1;
-+		bar->size0   = func == 0 ? 0x200 : 0x100;  /* OHCI/EHCI */
-+		bar->size1   = 0;
-+		bar->size2   = 0;
-+		bar->size3   = 0;
-+		break;
-+	default:
-+		cfg->base[0] = htol32(sb_base(R_REG(osh, &sb->sbadmatch0)));
-+		cfg->base[1] = htol32(sb_base(R_REG(osh, &sb->sbadmatch1)));
-+		cfg->base[2] = htol32(sb_base(R_REG(osh, &sb->sbadmatch2)));
-+		cfg->base[3] = htol32(sb_base(R_REG(osh, &sb->sbadmatch3)));
-+		cfg->base[4] = 0;
-+		cfg->base[5] = 0;
-+		bar->n       = (R_REG(osh, &sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT;
-+		bar->size0   = sb_size(R_REG(osh, &sb->sbadmatch0));
-+		bar->size1   = sb_size(R_REG(osh, &sb->sbadmatch1));
-+		bar->size2   = sb_size(R_REG(osh, &sb->sbadmatch2));
-+		bar->size3   = sb_size(R_REG(osh, &sb->sbadmatch3));
-+		break;
-+	}
-+}
-+
-+/*
-+ * Construct PCI config spaces for SB cores so that they
-+ * can be accessed as if they were PCI devices.
-+ */
-+static void __init
-+sbpci_init_cores(sb_t *sbh)
-+{
-+	uint chiprev, coreidx, i;
-+	sbconfig_t *sb;
-+	pci_config_regs *cfg, *pci;
-+	sb_bar_cfg_t *bar;
-+	void *regs;
-+	osl_t *osh;
-+	uint16 vendor, device;
-+	uint16 coreid;
-+	uint8 class, subclass, progif;
-+	uint dev;
-+	uint8 header;
-+	uint func;
-+
-+	chiprev = sb_chiprev(sbh);
-+	coreidx = sb_coreidx(sbh);
-+
-+	osh = sb_osh(sbh);
-+
-+	/* Scan the SB bus */
-+	bzero(sb_config_regs, sizeof(sb_config_regs));
-+	bzero(sb_bar_cfg, sizeof(sb_bar_cfg));
-+	bzero(sb_pci_cfg, sizeof(sb_pci_cfg));
-+	memset(&sb_pci_null, -1, sizeof(sb_pci_null));
-+	cfg = sb_config_regs;
-+	bar = sb_bar_cfg;
-+	for (dev = 0; dev < SB_MAXCORES; dev ++) {
-+		/* Check if the core exists */
-+		if (!(regs = sb_setcoreidx(sbh, dev)))
-+			continue;
-+		sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+		/* Check if this core is banned */
-+		coreid = sb_coreid(sbh);
-+		for (i = 0; i < pci_banned; i++)
-+			if (coreid == pci_ban[i])
-+				break;
-+		if (i < pci_banned)
-+			continue;
-+
-+		for (func = 0; func < MAXFUNCS; ++func) {
-+			/* Make sure we won't go beyond the limit */
-+			if (cfg >= &sb_config_regs[SB_MAXCORES]) {
-+				printk("PCI: too many emulated devices\n");
-+				goto done;
-+			}
-+
-+			/* Convert core id to pci id */
-+			if (sb_corepciid(sbh, func, &vendor, &device, &class, &subclass,
-+			                 &progif, &header))
-+				continue;
-+
-+			/*
-+			 * Differentiate real PCI config from emulated.
-+			 * non zero 'pci' indicate there is a real PCI config space
-+			 * for this device.
-+			 */
-+			switch (device) {
-+			case BCM47XX_GIGETH_ID:
-+				pci = (pci_config_regs *)((uint32)regs + 0x800);
-+				break;
-+			case BCM47XX_SATAXOR_ID:
-+				pci = (pci_config_regs *)((uint32)regs + 0x400);
-+				break;
-+			case BCM47XX_ATA100_ID:
-+				pci = (pci_config_regs *)((uint32)regs + 0x800);
-+				break;
-+			default:
-+				pci = NULL;
-+				break;
-+			}
-+			/* Supported translations */
-+			cfg->vendor = htol16(vendor);
-+			cfg->device = htol16(device);
-+			cfg->rev_id = chiprev;
-+			cfg->prog_if = progif;
-+			cfg->sub_class = subclass;
-+			cfg->base_class = class;
-+			cfg->header_type = header;
-+			sbpci_init_regions(sbh, func, cfg, bar);
-+			/* Save core interrupt flag */
-+			cfg->int_pin = R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
-+			/* Save core interrupt assignment */
-+			cfg->int_line = sb_irq(sbh);
-+			/* Indicate there is no SROM */
-+			*((uint32 *) &cfg->sprom_control) = 0xffffffff;
-+
-+			/* Point to the PCI config spaces */
-+			sb_pci_cfg[dev][func].emu = cfg;
-+			sb_pci_cfg[dev][func].pci = pci;
-+			sb_pci_cfg[dev][func].bar = bar;
-+			cfg ++;
-+			bar ++;
-+		}
-+	}
-+
-+done:
-+	sb_setcoreidx(sbh, coreidx);
-+}
-+
-+/*
-+ * Initialize PCI core and construct PCI config spaces for SB cores.
-+ * Must propagate sbpci_init_pci() return value to the caller to let
-+ * them know the PCI core initialization status.
-+ */
-+int __init
-+sbpci_init(sb_t *sbh)
-+{
-+	int status = sbpci_init_pci(sbh);
-+	sbpci_init_cores(sbh);
-+	return status;
-+}
-+
-diff -urN linux.old/arch/mips/bcm947xx/sbutils.c linux.dev/arch/mips/bcm947xx/sbutils.c
---- linux.old/arch/mips/bcm947xx/sbutils.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/sbutils.c	2006-05-02 04:33:16.000000000 +0200
-@@ -0,0 +1,3081 @@
-+/*
-+ * Misc utility routines for accessing chip-specific features
-+ * of the SiliconBackplane-based Broadcom chips.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: sbutils.c,v 1.10 2006/04/08 07:12:42 honor Exp $
-+ */
-+
-+#include <typedefs.h>
-+#include <bcmdefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <sbutils.h>
-+#include <bcmdevs.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <sbpci.h>
-+#include <sbpcie.h>
-+#include <pcicfg.h>
-+#include <sbpcmcia.h>
-+#include <sbextif.h>
-+#include <sbsocram.h>
-+#include <bcmsrom.h>
-+#ifdef __mips__
-+#include <mipsinc.h>
-+#endif	/* __mips__ */
-+
-+/* debug/trace */
-+#define	SB_ERROR(args)
-+
-+typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
-+typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
-+typedef bool (*sb_intrsenabled_t)(void *intr_arg);
-+
-+/* misc sb info needed by some of the routines */
-+typedef struct sb_info {
-+
-+	struct sb_pub  	sb;		/* back plane public state (must be first field) */
-+
-+	void	*osh;			/* osl os handle */
-+	void	*sdh;			/* bcmsdh handle */
-+
-+	void	*curmap;		/* current regs va */
-+	void	*regs[SB_MAXCORES];	/* other regs va */
-+
-+	uint	curidx;			/* current core index */
-+	uint	dev_coreid;		/* the core provides driver functions */
-+
-+	bool	memseg;			/* flag to toggle MEM_SEG register */
-+
-+	uint	gpioidx;		/* gpio control core index */
-+	uint	gpioid;			/* gpio control coretype */
-+
-+	uint	numcores;		/* # discovered cores */
-+	uint	coreid[SB_MAXCORES];	/* id of each core */
-+
-+	void	*intr_arg;		/* interrupt callback function arg */
-+	sb_intrsoff_t		intrsoff_fn;		/* turns chip interrupts off */
-+	sb_intrsrestore_t	intrsrestore_fn;	/* restore chip interrupts */
-+	sb_intrsenabled_t	intrsenabled_fn;	/* check if interrupts are enabled */
-+
-+} sb_info_t;
-+
-+/* local prototypes */
-+static sb_info_t * sb_doattach(sb_info_t *si, uint devid, osl_t *osh, void *regs,
-+	uint bustype, void *sdh, char **vars, uint *varsz);
-+static void sb_scan(sb_info_t *si);
-+static uint sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val);
-+static uint _sb_coreidx(sb_info_t *si);
-+static uint sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit);
-+static uint sb_pcidev2chip(uint pcidev);
-+static uint sb_chip2numcores(uint chip);
-+static bool sb_ispcie(sb_info_t *si);
-+static bool sb_find_pci_capability(sb_info_t *si, uint8 req_cap_id, uchar *buf, uint32 *buflen);
-+static int sb_pci_fixcfg(sb_info_t *si);
-+
-+/* routines to access mdio slave device registers */
-+static int sb_pcie_mdiowrite(sb_info_t *si,  uint physmedia, uint readdr, uint val);
-+static void sb_war30841(sb_info_t *si);
-+
-+/* delay needed between the mdio control/ mdiodata register data access */
-+#define PR28829_DELAY() OSL_DELAY(10)
-+
-+/* size that can take bitfielddump */
-+#define BITFIELD_DUMP_SIZE  32
-+
-+/* global variable to indicate reservation/release of gpio's */
-+static uint32 sb_gpioreservation = 0;
-+
-+#define	SB_INFO(sbh)	(sb_info_t*)sbh
-+#define	SET_SBREG(si, r, mask, val)	\
-+		W_SBREG((si), (r), ((R_SBREG((si), (r)) & ~(mask)) | (val)))
-+#define	GOODCOREADDR(x)	(((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && \
-+		ISALIGNED((x), SB_CORE_SIZE))
-+#define	GOODREGS(regs)	((regs) && ISALIGNED((uintptr)(regs), SB_CORE_SIZE))
-+#define	REGS2SB(va)	(sbconfig_t*) ((int8*)(va) + SBCONFIGOFF)
-+#define	GOODIDX(idx)	(((uint)idx) < SB_MAXCORES)
-+#define	BADIDX		(SB_MAXCORES+1)
-+#define	NOREV		-1		/* Invalid rev */
-+
-+#define PCI(si)		((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCI))
-+#define PCIE(si)	((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCIE))
-+
-+/* sonicsrev */
-+#define	SONICS_2_2	(SBIDL_RV_2_2 >> SBIDL_RV_SHIFT)
-+#define	SONICS_2_3	(SBIDL_RV_2_3 >> SBIDL_RV_SHIFT)
-+
-+#define	R_SBREG(si, sbr)	sb_read_sbreg((si), (sbr))
-+#define	W_SBREG(si, sbr, v)	sb_write_sbreg((si), (sbr), (v))
-+#define	AND_SBREG(si, sbr, v)	W_SBREG((si), (sbr), (R_SBREG((si), (sbr)) & (v)))
-+#define	OR_SBREG(si, sbr, v)	W_SBREG((si), (sbr), (R_SBREG((si), (sbr)) | (v)))
-+
-+/*
-+ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
-+ * after core switching to avoid invalid register accesss inside ISR.
-+ */
-+#define INTR_OFF(si, intr_val) \
-+	if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) {	\
-+		intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
-+#define INTR_RESTORE(si, intr_val) \
-+	if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) {	\
-+		(*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
-+
-+/* dynamic clock control defines */
-+#define	LPOMINFREQ		25000		/* low power oscillator min */
-+#define	LPOMAXFREQ		43000		/* low power oscillator max */
-+#define	XTALMINFREQ		19800000	/* 20 MHz - 1% */
-+#define	XTALMAXFREQ		20200000	/* 20 MHz + 1% */
-+#define	PCIMINFREQ		25000000	/* 25 MHz */
-+#define	PCIMAXFREQ		34000000	/* 33 MHz + fudge */
-+
-+#define	ILP_DIV_5MHZ		0		/* ILP = 5 MHz */
-+#define	ILP_DIV_1MHZ		4		/* ILP = 1 MHz */
-+
-+/* different register spaces to access thr'u pcie indirect access */
-+#define PCIE_CONFIGREGS 	1		/* Access to config space */
-+#define PCIE_PCIEREGS 		2		/* Access to pcie registers */
-+
-+/* GPIO Based LED powersave defines */
-+#define DEFAULT_GPIO_ONTIME	10		/* Default: 10% on */
-+#define DEFAULT_GPIO_OFFTIME	90		/* Default: 10% on */
-+
-+#define DEFAULT_GPIOTIMERVAL  ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME)
-+
-+static uint32
-+sb_read_sbreg(sb_info_t *si, volatile uint32 *sbr)
-+{
-+	uint8 tmp;
-+	uint32 val, intr_val = 0;
-+
-+
-+	/*
-+	 * compact flash only has 11 bits address, while we needs 12 bits address.
-+	 * MEM_SEG will be OR'd with other 11 bits address in hardware,
-+	 * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
-+	 * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
-+	 */
-+	if (si->memseg) {
-+		INTR_OFF(si, intr_val);
-+		tmp = 1;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+		sbr = (volatile uint32 *)((uintptr)sbr & ~(1 << 11)); /* mask out bit 11 */
-+	}
-+
-+	val = R_REG(si->osh, sbr);
-+
-+	if (si->memseg) {
-+		tmp = 0;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+		INTR_RESTORE(si, intr_val);
-+	}
-+
-+	return (val);
-+}
-+
-+static void
-+sb_write_sbreg(sb_info_t *si, volatile uint32 *sbr, uint32 v)
-+{
-+	uint8 tmp;
-+	volatile uint32 dummy;
-+	uint32 intr_val = 0;
-+
-+
-+	/*
-+	 * compact flash only has 11 bits address, while we needs 12 bits address.
-+	 * MEM_SEG will be OR'd with other 11 bits address in hardware,
-+	 * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
-+	 * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
-+	 */
-+	if (si->memseg) {
-+		INTR_OFF(si, intr_val);
-+		tmp = 1;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+		sbr = (volatile uint32 *)((uintptr)sbr & ~(1 << 11)); /* mask out bit 11 */
-+	}
-+
-+	if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
-+#ifdef IL_BIGENDIAN
-+		dummy = R_REG(si->osh, sbr);
-+		W_REG(si->osh, ((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff));
-+		dummy = R_REG(si->osh, sbr);
-+		W_REG(si->osh, (volatile uint16 *)sbr, (uint16)(v & 0xffff));
-+#else
-+		dummy = R_REG(si->osh, sbr);
-+		W_REG(si->osh, (volatile uint16 *)sbr, (uint16)(v & 0xffff));
-+		dummy = R_REG(si->osh, sbr);
-+		W_REG(si->osh, ((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff));
-+#endif	/* IL_BIGENDIAN */
-+	} else
-+		W_REG(si->osh, sbr, v);
-+
-+	if (si->memseg) {
-+		tmp = 0;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+		INTR_RESTORE(si, intr_val);
-+	}
-+}
-+
-+/*
-+ * Allocate a sb handle.
-+ * devid - pci device id (used to determine chip#)
-+ * osh - opaque OS handle
-+ * regs - virtual address of initial core registers
-+ * bustype - pci/pcmcia/sb/sdio/etc
-+ * vars - pointer to a pointer area for "environment" variables
-+ * varsz - pointer to int to return the size of the vars
-+ */
-+sb_t *
-+BCMINITFN(sb_attach)(uint devid, osl_t *osh, void *regs,
-+                     uint bustype, void *sdh, char **vars, uint *varsz)
-+{
-+	sb_info_t *si;
-+
-+	/* alloc sb_info_t */
-+	if ((si = MALLOC(osh, sizeof (sb_info_t))) == NULL) {
-+		SB_ERROR(("sb_attach: malloc failed! malloced %d bytes\n", MALLOCED(osh)));
-+		return (NULL);
-+	}
-+
-+	if (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, (uint*)varsz) == NULL) {
-+		MFREE(osh, si, sizeof(sb_info_t));
-+		return (NULL);
-+	}
-+
-+	return (sb_t *)si;
-+}
-+
-+/* Using sb_kattach depends on SB_BUS support, either implicit  */
-+/* no limiting BCMBUSTYPE value) or explicit (value is SB_BUS). */
-+#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS)
-+
-+/* global kernel resource */
-+static sb_info_t ksi;
-+static bool ksi_attached = FALSE;
-+
-+/* generic kernel variant of sb_attach() */
-+sb_t *
-+BCMINITFN(sb_kattach)(void)
-+{
-+	osl_t *osh = NULL;
-+	uint32 *regs;
-+
-+	if (!ksi_attached) {
-+		uint32 cid;
-+
-+		regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
-+		cid = R_REG(osh, (uint32 *)regs);
-+		if (((cid & CID_ID_MASK) == BCM4712_CHIP_ID) &&
-+		    ((cid & CID_PKG_MASK) != BCM4712LARGE_PKG_ID) &&
-+		    ((cid & CID_REV_MASK) <= (3 << CID_REV_SHIFT))) {
-+			uint32 *scc, val;
-+
-+			scc = (uint32 *)((uchar*)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
-+			val = R_REG(osh, scc);
-+			SB_ERROR(("    initial scc = 0x%x\n", val));
-+			val |= SCC_SS_XTAL;
-+			W_REG(osh, scc, val);
-+		}
-+
-+		if (sb_doattach(&ksi, BCM4710_DEVICE_ID, osh, (void*)regs,
-+			SB_BUS, NULL, NULL, NULL) == NULL) {
-+			return NULL;
-+		}
-+		else
-+			ksi_attached = TRUE;
-+	}
-+
-+	return (sb_t *)&ksi;
-+}
-+#endif	/* !BCMBUSTYPE || (BCMBUSTYPE == SB_BUS) */
-+
-+static sb_info_t  *
-+BCMINITFN(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs,
-+                       uint bustype, void *sdh, char **vars, uint *varsz)
-+{
-+	uint origidx;
-+	chipcregs_t *cc;
-+	sbconfig_t *sb;
-+	uint32 w;
-+
-+	ASSERT(GOODREGS(regs));
-+
-+	bzero((uchar*)si, sizeof(sb_info_t));
-+
-+	si->sb.buscoreidx = si->gpioidx = BADIDX;
-+
-+	si->curmap = regs;
-+	si->sdh = sdh;
-+	si->osh = osh;
-+
-+	/* check to see if we are a sb core mimic'ing a pci core */
-+	if (bustype == PCI_BUS) {
-+		if (OSL_PCI_READ_CONFIG(si->osh, PCI_SPROM_CONTROL, sizeof(uint32)) == 0xffffffff) {
-+			SB_ERROR(("%s: incoming bus is PCI but it's a lie, switching to SB "
-+			          "devid:0x%x\n", __FUNCTION__, devid));
-+			bustype = SB_BUS;
-+		}
-+	}
-+
-+	si->sb.bustype = bustype;
-+	if (si->sb.bustype != BUSTYPE(si->sb.bustype)) {
-+		SB_ERROR(("sb_doattach: bus type %d does not match configured bus type %d\n",
-+		          si->sb.bustype, BUSTYPE(si->sb.bustype)));
-+		return NULL;
-+	}
-+
-+	/* need to set memseg flag for CF card first before any sb registers access */
-+	if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS)
-+		si->memseg = TRUE;
-+
-+	/* kludge to enable the clock on the 4306 which lacks a slowclock */
-+	if (BUSTYPE(si->sb.bustype) == PCI_BUS)
-+		sb_clkctl_xtal(&si->sb, XTAL|PLL, ON);
-+
-+	if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
-+		w = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32));
-+		if (!GOODCOREADDR(w))
-+			OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32), SB_ENUM_BASE);
-+	}
-+
-+	/* initialize current core index value */
-+	si->curidx = _sb_coreidx(si);
-+
-+	if (si->curidx == BADIDX) {
-+		SB_ERROR(("sb_doattach: bad core index\n"));
-+		return NULL;
-+	}
-+
-+	/* get sonics backplane revision */
-+	sb = REGS2SB(si->curmap);
-+	si->sb.sonicsrev = (R_SBREG(si, &sb->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT;
-+
-+	/* keep and reuse the initial register mapping */
-+	origidx = si->curidx;
-+	if (BUSTYPE(si->sb.bustype) == SB_BUS)
-+		si->regs[origidx] = regs;
-+
-+	/* is core-0 a chipcommon core? */
-+	si->numcores = 1;
-+	cc = (chipcregs_t*) sb_setcoreidx(&si->sb, 0);
-+	if (sb_coreid(&si->sb) != SB_CC)
-+		cc = NULL;
-+
-+	/* determine chip id and rev */
-+	if (cc) {
-+		/* chip common core found! */
-+		si->sb.chip = R_REG(si->osh, &cc->chipid) & CID_ID_MASK;
-+		si->sb.chiprev = (R_REG(si->osh, &cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
-+		si->sb.chippkg = (R_REG(si->osh, &cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
-+	} else {
-+		/* no chip common core -- must convert device id to chip id */
-+		if ((si->sb.chip = sb_pcidev2chip(devid)) == 0) {
-+			SB_ERROR(("sb_doattach: unrecognized device id 0x%04x\n", devid));
-+			sb_setcoreidx(&si->sb, origidx);
-+			return NULL;
-+		}
-+	}
-+
-+	/* get chipcommon rev */
-+	si->sb.ccrev = cc ? (int)sb_corerev(&si->sb) : NOREV;
-+
-+	/* determine numcores */
-+	if (cc && ((si->sb.ccrev == 4) || (si->sb.ccrev >= 6)))
-+		si->numcores = (R_REG(si->osh, &cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
-+	else
-+		si->numcores = sb_chip2numcores(si->sb.chip);
-+
-+	/* return to original core */
-+	sb_setcoreidx(&si->sb, origidx);
-+
-+	/* sanity checks */
-+	ASSERT(si->sb.chip);
-+
-+	/* scan for cores */
-+	sb_scan(si);
-+
-+	/* fixup necessary chip/core configurations */
-+	if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
-+		if (sb_pci_fixcfg(si)) {
-+			SB_ERROR(("sb_doattach: sb_pci_fixcfg failed\n"));
-+			return NULL;
-+		}
-+	}
-+
-+	/* srom_var_init() depends on sb_scan() info */
-+	if (srom_var_init(si, si->sb.bustype, si->curmap, si->osh, vars, varsz)) {
-+		SB_ERROR(("sb_doattach: srom_var_init failed: bad srom\n"));
-+		return (NULL);
-+	}
-+
-+	if (cc == NULL) {
-+		/*
-+		 * The chip revision number is hardwired into all
-+		 * of the pci function config rev fields and is
-+		 * independent from the individual core revision numbers.
-+		 * For example, the "A0" silicon of each chip is chip rev 0.
-+		 * For PCMCIA we get it from the CIS instead.
-+		 */
-+		if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
-+			ASSERT(vars);
-+			si->sb.chiprev = getintvar(*vars, "chiprev");
-+		} else if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
-+			w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_REV, sizeof(uint32));
-+			si->sb.chiprev = w & 0xff;
-+		} else
-+			si->sb.chiprev = 0;
-+	}
-+
-+	if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
-+		w = getintvar(*vars, "regwindowsz");
-+		si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
-+	}
-+
-+	/* gpio control core is required */
-+	if (!GOODIDX(si->gpioidx)) {
-+		SB_ERROR(("sb_doattach: gpio control core not found\n"));
-+		return NULL;
-+	}
-+
-+	/* get boardtype and boardrev */
-+	switch (BUSTYPE(si->sb.bustype)) {
-+	case PCI_BUS:
-+		/* do a pci config read to get subsystem id and subvendor id */
-+		w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_SVID, sizeof(uint32));
-+		si->sb.boardvendor = w & 0xffff;
-+		si->sb.boardtype = (w >> 16) & 0xffff;
-+		break;
-+
-+	case PCMCIA_BUS:
-+	case SDIO_BUS:
-+		si->sb.boardvendor = getintvar(*vars, "manfid");
-+		si->sb.boardtype = getintvar(*vars, "prodid");
-+		break;
-+
-+	case SB_BUS:
-+	case JTAG_BUS:
-+		si->sb.boardvendor = VENDOR_BROADCOM;
-+		if ((si->sb.boardtype = getintvar(NULL, "boardtype")) == 0)
-+			si->sb.boardtype = 0xffff;
-+		break;
-+	}
-+
-+	if (si->sb.boardtype == 0) {
-+		SB_ERROR(("sb_doattach: unknown board type\n"));
-+		ASSERT(si->sb.boardtype);
-+	}
-+
-+	/* setup the GPIO based LED powersave register */
-+	if (si->sb.ccrev >= 16) {
-+		if ((vars == NULL) || ((w = getintvar(*vars, "leddc")) == 0))
-+			w = DEFAULT_GPIOTIMERVAL;
-+		sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), ~0, w);
-+	}
-+	if ((si->sb.chip == BCM4311_CHIP_ID) && (si->sb.chiprev <= 1)) {
-+		/* set proper clk setup delays before forcing HT */
-+		sb_clkctl_init((void *)si);
-+		sb_corereg((void*)si, SB_CC_IDX, OFFSETOF(chipcregs_t, system_clk_ctl),
-+		           SYCC_HR, SYCC_HR);
-+	}
-+
-+
-+	return (si);
-+}
-+
-+uint
-+sb_coreid(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+
-+	return ((R_SBREG(si, &sb->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
-+}
-+
-+uint
-+sb_coreidx(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->curidx);
-+}
-+
-+/* return current index of core */
-+static uint
-+_sb_coreidx(sb_info_t *si)
-+{
-+	sbconfig_t *sb;
-+	uint32 sbaddr = 0;
-+
-+	ASSERT(si);
-+
-+	switch (BUSTYPE(si->sb.bustype)) {
-+	case SB_BUS:
-+		sb = REGS2SB(si->curmap);
-+		sbaddr = sb_base(R_SBREG(si, &sb->sbadmatch0));
-+		break;
-+
-+	case PCI_BUS:
-+		sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32));
-+		break;
-+
-+	case PCMCIA_BUS: {
-+		uint8 tmp = 0;
-+
-+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
-+		sbaddr  = (uint)tmp << 12;
-+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
-+		sbaddr |= (uint)tmp << 16;
-+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
-+		sbaddr |= (uint)tmp << 24;
-+		break;
-+	}
-+
-+#ifdef BCMJTAG
-+	case JTAG_BUS:
-+		sbaddr = (uint32)si->curmap;
-+		break;
-+#endif	/* BCMJTAG */
-+
-+	default:
-+		ASSERT(0);
-+	}
-+
-+	if (!GOODCOREADDR(sbaddr))
-+		return BADIDX;
-+
-+	return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE);
-+}
-+
-+uint
-+sb_corevendor(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+
-+	return ((R_SBREG(si, &sb->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
-+}
-+
-+uint
-+sb_corerev(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+	uint sbidh;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+	sbidh = R_SBREG(si, &sb->sbidhigh);
-+
-+	return (SBCOREREV(sbidh));
-+}
-+
-+void *
-+sb_osh(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return si->osh;
-+}
-+
-+void
-+sb_setosh(sb_t *sbh, osl_t *osh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	if (si->osh != NULL) {
-+		SB_ERROR(("osh is already set....\n"));
-+		ASSERT(!si->osh);
-+	}
-+	si->osh = osh;
-+}
-+
-+/* set/clear sbtmstatelow core-specific flags */
-+uint32
-+sb_coreflags(sb_t *sbh, uint32 mask, uint32 val)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+	uint32 w;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+
-+	ASSERT((val & ~mask) == 0);
-+
-+	/* mask and set */
-+	if (mask || val) {
-+		w = (R_SBREG(si, &sb->sbtmstatelow) & ~mask) | val;
-+		W_SBREG(si, &sb->sbtmstatelow, w);
-+	}
-+
-+	/* return the new value */
-+	return (R_SBREG(si, &sb->sbtmstatelow));
-+}
-+
-+/* set/clear sbtmstatehigh core-specific flags */
-+uint32
-+sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+	uint32 w;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+
-+	ASSERT((val & ~mask) == 0);
-+	ASSERT((mask & ~SBTMH_FL_MASK) == 0);
-+
-+	/* mask and set */
-+	if (mask || val) {
-+		w = (R_SBREG(si, &sb->sbtmstatehigh) & ~mask) | val;
-+		W_SBREG(si, &sb->sbtmstatehigh, w);
-+	}
-+
-+	/* return the new value */
-+	return (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
-+}
-+
-+/* Run bist on current core. Caller needs to take care of core-specific bist hazards */
-+int
-+sb_corebist(sb_t *sbh)
-+{
-+	uint32 sblo;
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+	int result = 0;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+
-+	sblo = R_SBREG(si, &sb->sbtmstatelow);
-+	W_SBREG(si, &sb->sbtmstatelow, (sblo | SBTML_FGC | SBTML_BE));
-+
-+	SPINWAIT(((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BISTD) == 0), 100000);
-+
-+	if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BISTF)
-+		result = BCME_ERROR;
-+
-+	W_SBREG(si, &sb->sbtmstatelow, sblo);
-+
-+	return result;
-+}
-+
-+bool
-+sb_iscoreup(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+
-+	return ((R_SBREG(si, &sb->sbtmstatelow) &
-+	         (SBTML_RESET | SBTML_REJ_MASK | SBTML_CLK)) == SBTML_CLK);
-+}
-+
-+/*
-+ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
-+ * switch back to the original core, and return the new value.
-+ *
-+ * When using the silicon backplane, no fidleing with interrupts or core switches are needed.
-+ *
-+ * Also, when using pci/pcie, we can optimize away the core switching for pci registers
-+ * and (on newer pci cores) chipcommon registers.
-+ */
-+static uint
-+sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val)
-+{
-+	uint origidx = 0;
-+	uint32 *r = NULL;
-+	uint w;
-+	uint intr_val = 0;
-+	bool fast = FALSE;
-+
-+	ASSERT(GOODIDX(coreidx));
-+	ASSERT(regoff < SB_CORE_SIZE);
-+	ASSERT((val & ~mask) == 0);
-+
-+#ifdef	notyet
-+	if (si->sb.bustype == SB_BUS) {
-+		/* If internal bus, we can always get at everything */
-+		fast = TRUE;
-+		r = (uint32 *)((uchar *)si->regs[coreidx] + regoff);
-+	} else if (si->sb.bustype == PCI_BUS) {
-+		/* If pci/pcie, we can get at pci/pcie regs and on newer cores to chipc */
-+
-+		if ((si->coreid[coreidx] == SB_CC) &&
-+		    ((si->sb.buscoretype == SB_PCIE) ||
-+		     (si->sb.buscorerev >= 13))) {
-+			/* Chipc registers are mapped at 12KB */
-+
-+			fast = TRUE;
-+			r = (uint32 *)((char *)si->curmap + PCI_16KB0_CCREGS_OFFSET + regoff);
-+		} else if (si->sb.buscoreidx == coreidx) {
-+			/* pci registers are at either in the last 2KB of an 8KB window
-+			 * or, in pcie and pci rev 13 at 8KB
-+			 */
-+			fast = TRUE;
-+			if ((si->sb.buscoretype == SB_PCIE) ||
-+			    (si->sb.buscorerev >= 13))
-+				r = (uint32 *)((char *)si->curmap +
-+				               PCI_16KB0_PCIREGS_OFFSET + regoff);
-+			else
-+				r = (uint32 *)((char *)si->curmap +
-+				               ((regoff >= SBCONFIGOFF) ?
-+				                PCI_BAR0_PCISBR_OFFSET : PCI_BAR0_PCIREGS_OFFSET) +
-+				               regoff);
-+		}
-+	}
-+#endif	/* notyet */
-+
-+	if (!fast) {
-+		INTR_OFF(si, intr_val);
-+
-+		/* save current core index */
-+		origidx = sb_coreidx(&si->sb);
-+
-+		/* switch core */
-+		r = (uint32*) ((uchar*) sb_setcoreidx(&si->sb, coreidx) + regoff);
-+	}
-+	ASSERT(r);
-+
-+	/* mask and set */
-+	if (mask || val) {
-+		if (regoff >= SBCONFIGOFF) {
-+			w = (R_SBREG(si, r) & ~mask) | val;
-+			W_SBREG(si, r, w);
-+		} else {
-+			w = (R_REG(si->osh, r) & ~mask) | val;
-+			W_REG(si->osh, r, w);
-+		}
-+	}
-+
-+	/* readback */
-+	if (regoff >= SBCONFIGOFF)
-+		w = R_SBREG(si, r);
-+	else
-+		w = R_REG(si->osh, r);
-+
-+	if (!fast) {
-+		/* restore core index */
-+		if (origidx != coreidx)
-+			sb_setcoreidx(&si->sb, origidx);
-+
-+		INTR_RESTORE(si, intr_val);
-+	}
-+
-+	return (w);
-+}
-+
-+#define DWORD_ALIGN(x)  (x & ~(0x03))
-+#define BYTE_POS(x) (x & 0x3)
-+#define WORD_POS(x) (x & 0x1)
-+
-+#define BYTE_SHIFT(x)  (8 * BYTE_POS(x))
-+#define WORD_SHIFT(x)  (16 * WORD_POS(x))
-+
-+#define BYTE_VAL(a, x) ((a >> BYTE_SHIFT(x)) & 0xFF)
-+#define WORD_VAL(a, x) ((a >> WORD_SHIFT(x)) & 0xFFFF)
-+
-+#define read_pci_cfg_byte(a) \
-+	(BYTE_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xff)
-+
-+#define read_pci_cfg_write(a) \
-+	(WORD_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xffff)
-+
-+
-+/* return TRUE if requested capability exists in the PCI config space */
-+static bool
-+sb_find_pci_capability(sb_info_t *si, uint8 req_cap_id, uchar *buf, uint32 *buflen)
-+{
-+	uint8 cap_id;
-+	uint8 cap_ptr;
-+	uint32 	bufsize;
-+	uint8 byte_val;
-+
-+	if (BUSTYPE(si->sb.bustype) != PCI_BUS)
-+		return FALSE;
-+
-+	/* check for Header type 0 */
-+	byte_val = read_pci_cfg_byte(PCI_CFG_HDR);
-+	if ((byte_val & 0x7f) != PCI_HEADER_NORMAL)
-+		return FALSE;
-+
-+	/* check if the capability pointer field exists */
-+	byte_val = read_pci_cfg_byte(PCI_CFG_STAT);
-+	if (!(byte_val & PCI_CAPPTR_PRESENT))
-+		return FALSE;
-+
-+	cap_ptr = read_pci_cfg_byte(PCI_CFG_CAPPTR);
-+	/* check if the capability pointer is 0x00 */
-+	if (cap_ptr == 0x00)
-+		return FALSE;
-+
-+
-+	/* loop thr'u the capability list and see if the pcie capabilty exists */
-+
-+	cap_id = read_pci_cfg_byte(cap_ptr);
-+
-+	while (cap_id != req_cap_id) {
-+		cap_ptr = read_pci_cfg_byte((cap_ptr+1));
-+		if (cap_ptr == 0x00) break;
-+		cap_id = read_pci_cfg_byte(cap_ptr);
-+	}
-+	if (cap_id != req_cap_id) {
-+		return FALSE;
-+	}
-+	/* found the caller requested capability */
-+	if ((buf != NULL) && (buflen != NULL)) {
-+		bufsize = *buflen;
-+		if (!bufsize) goto end;
-+		*buflen = 0;
-+		/* copy the cpability data excluding cap ID and next ptr */
-+		cap_ptr += 2;
-+		if ((bufsize + cap_ptr)  > SZPCR)
-+			bufsize = SZPCR - cap_ptr;
-+		*buflen = bufsize;
-+		while (bufsize--) {
-+			*buf = read_pci_cfg_byte(cap_ptr);
-+			cap_ptr++;
-+			buf++;
-+		}
-+	}
-+end:
-+	return TRUE;
-+}
-+
-+/* return TRUE if PCIE capability exists the pci config space */
-+static inline bool
-+sb_ispcie(sb_info_t *si)
-+{
-+	return (sb_find_pci_capability(si, PCI_CAP_PCIECAP_ID, NULL, NULL));
-+}
-+
-+/* scan the sb enumerated space to identify all cores */
-+static void
-+BCMINITFN(sb_scan)(sb_info_t *si)
-+{
-+	uint origidx;
-+	uint i;
-+	bool pci;
-+	bool pcie;
-+	uint pciidx;
-+	uint pcieidx;
-+	uint pcirev;
-+	uint pcierev;
-+
-+
-+	/* numcores should already be set */
-+	ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
-+
-+	/* save current core index */
-+	origidx = sb_coreidx(&si->sb);
-+
-+	si->sb.buscorerev = NOREV;
-+	si->sb.buscoreidx = BADIDX;
-+
-+	si->gpioidx = BADIDX;
-+
-+	pci = pcie = FALSE;
-+	pcirev = pcierev = NOREV;
-+	pciidx = pcieidx = BADIDX;
-+
-+	for (i = 0; i < si->numcores; i++) {
-+		sb_setcoreidx(&si->sb, i);
-+		si->coreid[i] = sb_coreid(&si->sb);
-+
-+		if (si->coreid[i] == SB_PCI) {
-+			pciidx = i;
-+			pcirev = sb_corerev(&si->sb);
-+			pci = TRUE;
-+		} else if (si->coreid[i] == SB_PCIE) {
-+			pcieidx = i;
-+			pcierev = sb_corerev(&si->sb);
-+			pcie = TRUE;
-+		} else if (si->coreid[i] == SB_PCMCIA) {
-+			si->sb.buscorerev = sb_corerev(&si->sb);
-+			si->sb.buscoretype = si->coreid[i];
-+			si->sb.buscoreidx = i;
-+		}
-+	}
-+	if (pci && pcie) {
-+		if (sb_ispcie(si))
-+			pci = FALSE;
-+		else
-+			pcie = FALSE;
-+	}
-+	if (pci) {
-+		si->sb.buscoretype = SB_PCI;
-+		si->sb.buscorerev = pcirev;
-+		si->sb.buscoreidx = pciidx;
-+	} else if (pcie) {
-+		si->sb.buscoretype = SB_PCIE;
-+		si->sb.buscorerev = pcierev;
-+		si->sb.buscoreidx = pcieidx;
-+	}
-+
-+	/*
-+	 * Find the gpio "controlling core" type and index.
-+	 * Precedence:
-+	 * - if there's a chip common core - use that
-+	 * - else if there's a pci core (rev >= 2) - use that
-+	 * - else there had better be an extif core (4710 only)
-+	 */
-+	if (GOODIDX(sb_findcoreidx(si, SB_CC, 0))) {
-+		si->gpioidx = sb_findcoreidx(si, SB_CC, 0);
-+		si->gpioid = SB_CC;
-+	} else if (PCI(si) && (si->sb.buscorerev >= 2)) {
-+		si->gpioidx = si->sb.buscoreidx;
-+		si->gpioid = SB_PCI;
-+	} else if (sb_findcoreidx(si, SB_EXTIF, 0)) {
-+		si->gpioidx = sb_findcoreidx(si, SB_EXTIF, 0);
-+		si->gpioid = SB_EXTIF;
-+	} else
-+		ASSERT(si->gpioidx != BADIDX);
-+
-+	/* return to original core index */
-+	sb_setcoreidx(&si->sb, origidx);
-+}
-+
-+/* may be called with core in reset */
-+void
-+sb_detach(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint idx;
-+
-+	si = SB_INFO(sbh);
-+
-+	if (si == NULL)
-+		return;
-+
-+	if (BUSTYPE(si->sb.bustype) == SB_BUS)
-+		for (idx = 0; idx < SB_MAXCORES; idx++)
-+			if (si->regs[idx]) {
-+				REG_UNMAP(si->regs[idx]);
-+				si->regs[idx] = NULL;
-+			}
-+#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS)
-+	if (si != &ksi)
-+#endif	/* !BCMBUSTYPE || (BCMBUSTYPE == SB_BUS) */
-+		MFREE(si->osh, si, sizeof(sb_info_t));
-+
-+}
-+
-+/* use pci dev id to determine chip id for chips not having a chipcommon core */
-+static uint
-+BCMINITFN(sb_pcidev2chip)(uint pcidev)
-+{
-+	if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID))
-+		return (BCM4710_CHIP_ID);
-+	if ((pcidev >= BCM4402_ENET_ID) && (pcidev <= BCM4402_V90_ID))
-+		return (BCM4402_CHIP_ID);
-+	if (pcidev == BCM4401_ENET_ID)
-+		return (BCM4402_CHIP_ID);
-+
-+	return (0);
-+}
-+
-+/* convert chip number to number of i/o cores */
-+static uint
-+BCMINITFN(sb_chip2numcores)(uint chip)
-+{
-+	if (chip == BCM4710_CHIP_ID)
-+		return (9);
-+	if (chip == BCM4402_CHIP_ID)
-+		return (3);
-+	if (chip == BCM4306_CHIP_ID)	/* < 4306c0 */
-+		return (6);
-+	if (chip == BCM4704_CHIP_ID)
-+		return (9);
-+	if (chip == BCM5365_CHIP_ID)
-+		return (7);
-+
-+	SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip));
-+	ASSERT(0);
-+	return (1);
-+}
-+
-+/* return index of coreid or BADIDX if not found */
-+static uint
-+sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit)
-+{
-+	uint found;
-+	uint i;
-+
-+	found = 0;
-+
-+	for (i = 0; i < si->numcores; i++)
-+		if (si->coreid[i] == coreid) {
-+			if (found == coreunit)
-+				return (i);
-+			found++;
-+		}
-+
-+	return (BADIDX);
-+}
-+
-+/* 
-+ * this function changes logical "focus" to the indiciated core,
-+ * must be called with interrupt off.
-+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
-+ */
-+void*
-+sb_setcoreidx(sb_t *sbh, uint coreidx)
-+{
-+	sb_info_t *si;
-+	uint32 sbaddr;
-+	uint8 tmp;
-+
-+	si = SB_INFO(sbh);
-+
-+	if (coreidx >= si->numcores)
-+		return (NULL);
-+
-+	/*
-+	 * If the user has provided an interrupt mask enabled function,
-+	 * then assert interrupts are disabled before switching the core.
-+	 */
-+	ASSERT((si->intrsenabled_fn == NULL) || !(*(si)->intrsenabled_fn)((si)->intr_arg));
-+
-+	sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE);
-+
-+	switch (BUSTYPE(si->sb.bustype)) {
-+	case SB_BUS:
-+		/* map new one */
-+		if (!si->regs[coreidx]) {
-+			si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE);
-+			ASSERT(GOODREGS(si->regs[coreidx]));
-+		}
-+		si->curmap = si->regs[coreidx];
-+		break;
-+
-+	case PCI_BUS:
-+		/* point bar0 window */
-+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr);
-+		break;
-+
-+	case PCMCIA_BUS:
-+		tmp = (sbaddr >> 12) & 0x0f;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
-+		tmp = (sbaddr >> 16) & 0xff;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
-+		tmp = (sbaddr >> 24) & 0xff;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
-+		break;
-+#ifdef BCMJTAG
-+	case JTAG_BUS:
-+		/* map new one */
-+		if (!si->regs[coreidx]) {
-+			si->regs[coreidx] = (void *)sbaddr;
-+			ASSERT(GOODREGS(si->regs[coreidx]));
-+		}
-+		si->curmap = si->regs[coreidx];
-+		break;
-+#endif	/* BCMJTAG */
-+	}
-+
-+	si->curidx = coreidx;
-+
-+	return (si->curmap);
-+}
-+
-+/* 
-+ * this function changes logical "focus" to the indiciated core,
-+ * must be called with interrupt off.
-+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
-+ */
-+void*
-+sb_setcore(sb_t *sbh, uint coreid, uint coreunit)
-+{
-+	sb_info_t *si;
-+	uint idx;
-+
-+	si = SB_INFO(sbh);
-+	idx = sb_findcoreidx(si, coreid, coreunit);
-+	if (!GOODIDX(idx))
-+		return (NULL);
-+
-+	return (sb_setcoreidx(sbh, idx));
-+}
-+
-+/* return chip number */
-+uint
-+sb_chip(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.chip);
-+}
-+
-+/* return chip revision number */
-+uint
-+sb_chiprev(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.chiprev);
-+}
-+
-+/* return chip common revision number */
-+uint
-+sb_chipcrev(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.ccrev);
-+}
-+
-+/* return chip package option */
-+uint
-+sb_chippkg(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.chippkg);
-+}
-+
-+/* return PCI core rev. */
-+uint
-+sb_pcirev(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.buscorerev);
-+}
-+
-+bool
-+BCMINITFN(sb_war16165)(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	return (PCI(si) && (si->sb.buscorerev <= 10));
-+}
-+
-+static void
-+BCMINITFN(sb_war30841)(sb_info_t *si)
-+{
-+	sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128);
-+	sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_CDR, 0x0100);
-+	sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_CDRBW, 0x1466);
-+}
-+
-+/* return PCMCIA core rev. */
-+uint
-+BCMINITFN(sb_pcmciarev)(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.buscorerev);
-+}
-+
-+/* return board vendor id */
-+uint
-+sb_boardvendor(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.boardvendor);
-+}
-+
-+/* return boardtype */
-+uint
-+sb_boardtype(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	char *var;
-+
-+	si = SB_INFO(sbh);
-+
-+	if (BUSTYPE(si->sb.bustype) == SB_BUS && si->sb.boardtype == 0xffff) {
-+		/* boardtype format is a hex string */
-+		si->sb.boardtype = getintvar(NULL, "boardtype");
-+
-+		/* backward compatibility for older boardtype string format */
-+		if ((si->sb.boardtype == 0) && (var = getvar(NULL, "boardtype"))) {
-+			if (!strcmp(var, "bcm94710dev"))
-+				si->sb.boardtype = BCM94710D_BOARD;
-+			else if (!strcmp(var, "bcm94710ap"))
-+				si->sb.boardtype = BCM94710AP_BOARD;
-+			else if (!strcmp(var, "bu4710"))
-+				si->sb.boardtype = BU4710_BOARD;
-+			else if (!strcmp(var, "bcm94702mn"))
-+				si->sb.boardtype = BCM94702MN_BOARD;
-+			else if (!strcmp(var, "bcm94710r1"))
-+				si->sb.boardtype = BCM94710R1_BOARD;
-+			else if (!strcmp(var, "bcm94710r4"))
-+				si->sb.boardtype = BCM94710R4_BOARD;
-+			else if (!strcmp(var, "bcm94702cpci"))
-+				si->sb.boardtype = BCM94702CPCI_BOARD;
-+			else if (!strcmp(var, "bcm95380_rr"))
-+				si->sb.boardtype = BCM95380RR_BOARD;
-+		}
-+	}
-+
-+	return (si->sb.boardtype);
-+}
-+
-+/* return bus type of sbh device */
-+uint
-+sb_bus(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.bustype);
-+}
-+
-+/* return bus core type */
-+uint
-+sb_buscoretype(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	return (si->sb.buscoretype);
-+}
-+
-+/* return bus core revision */
-+uint
-+sb_buscorerev(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	si = SB_INFO(sbh);
-+
-+	return (si->sb.buscorerev);
-+}
-+
-+/* return list of found cores */
-+uint
-+sb_corelist(sb_t *sbh, uint coreid[])
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof(uint)));
-+	return (si->numcores);
-+}
-+
-+/* return current register mapping */
-+void *
-+sb_coreregs(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	ASSERT(GOODREGS(si->curmap));
-+
-+	return (si->curmap);
-+}
-+
-+
-+/* do buffered registers update */
-+void
-+sb_commit(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	uint intr_val = 0;
-+
-+	si = SB_INFO(sbh);
-+
-+	origidx = si->curidx;
-+	ASSERT(GOODIDX(origidx));
-+
-+	INTR_OFF(si, intr_val);
-+
-+	/* switch over to chipcommon core if there is one, else use pci */
-+	if (si->sb.ccrev != NOREV) {
-+		chipcregs_t *ccregs = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0);
-+
-+		/* do the buffer registers update */
-+		W_REG(si->osh, &ccregs->broadcastaddress, SB_COMMIT);
-+		W_REG(si->osh, &ccregs->broadcastdata, 0x0);
-+	} else if (PCI(si)) {
-+		sbpciregs_t *pciregs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0);
-+
-+		/* do the buffer registers update */
-+		W_REG(si->osh, &pciregs->bcastaddr, SB_COMMIT);
-+		W_REG(si->osh, &pciregs->bcastdata, 0x0);
-+	} else
-+		ASSERT(0);
-+
-+	/* restore core index */
-+	sb_setcoreidx(sbh, origidx);
-+	INTR_RESTORE(si, intr_val);
-+}
-+
-+/* reset and re-enable a core
-+ * inputs:
-+ * bits - core specific bits that are set during and after reset sequence
-+ * resetbits - core specific bits that are set only during reset sequence
-+ */
-+void
-+sb_core_reset(sb_t *sbh, uint32 bits, uint32 resetbits)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+	volatile uint32 dummy;
-+
-+	si = SB_INFO(sbh);
-+	ASSERT(GOODREGS(si->curmap));
-+	sb = REGS2SB(si->curmap);
-+
-+	/*
-+	 * Must do the disable sequence first to work for arbitrary current core state.
-+	 */
-+	sb_core_disable(sbh, (bits | resetbits));
-+
-+	/*
-+	 * Now do the initialization sequence.
-+	 */
-+
-+	/* set reset while enabling the clock and forcing them on throughout the core */
-+	W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits | resetbits));
-+	dummy = R_SBREG(si, &sb->sbtmstatelow);
-+	OSL_DELAY(1);
-+
-+	if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_SERR) {
-+		W_SBREG(si, &sb->sbtmstatehigh, 0);
-+	}
-+	if ((dummy = R_SBREG(si, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
-+		AND_SBREG(si, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
-+	}
-+
-+	/* clear reset and allow it to propagate throughout the core */
-+	W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
-+	dummy = R_SBREG(si, &sb->sbtmstatelow);
-+	OSL_DELAY(1);
-+
-+	/* leave clock enabled */
-+	W_SBREG(si, &sb->sbtmstatelow, (SBTML_CLK | bits));
-+	dummy = R_SBREG(si, &sb->sbtmstatelow);
-+	OSL_DELAY(1);
-+}
-+
-+void
-+sb_core_tofixup(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+
-+	si = SB_INFO(sbh);
-+
-+	if ((BUSTYPE(si->sb.bustype) != PCI_BUS) || PCIE(si) ||
-+	    (PCI(si) && (si->sb.buscorerev >= 5)))
-+		return;
-+
-+	ASSERT(GOODREGS(si->curmap));
-+	sb = REGS2SB(si->curmap);
-+
-+	if (BUSTYPE(si->sb.bustype) == SB_BUS) {
-+		SET_SBREG(si, &sb->sbimconfiglow,
-+		          SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+		          (0x5 << SBIMCL_RTO_SHIFT) | 0x3);
-+	} else {
-+		if (sb_coreid(sbh) == SB_PCI) {
-+			SET_SBREG(si, &sb->sbimconfiglow,
-+			          SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+			          (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
-+		} else {
-+			SET_SBREG(si, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
-+		}
-+	}
-+
-+	sb_commit(sbh);
-+}
-+
-+/*
-+ * Set the initiator timeout for the "master core".
-+ * The master core is defined to be the core in control
-+ * of the chip and so it issues accesses to non-memory
-+ * locations (Because of dma *any* core can access memeory).
-+ *
-+ * The routine uses the bus to decide who is the master:
-+ *	SB_BUS => mips
-+ *	JTAG_BUS => chipc
-+ *	PCI_BUS => pci or pcie
-+ *	PCMCIA_BUS => pcmcia
-+ *	SDIO_BUS => pcmcia
-+ *
-+ * This routine exists so callers can disable initiator
-+ * timeouts so accesses to very slow devices like otp
-+ * won't cause an abort. The routine allows arbitrary
-+ * settings of the service and request timeouts, though.
-+ *
-+ * Returns the timeout state before changing it or -1
-+ * on error.
-+ */
-+
-+#define	TO_MASK	(SBIMCL_RTO_MASK | SBIMCL_STO_MASK)
-+
-+uint32
-+sb_set_initiator_to(sb_t *sbh, uint32 to)
-+{
-+	sb_info_t *si;
-+	uint origidx, idx;
-+	uint intr_val = 0;
-+	uint32 tmp, ret = 0xffffffff;
-+	sbconfig_t *sb;
-+
-+	si = SB_INFO(sbh);
-+
-+	if ((to & ~TO_MASK) != 0)
-+		return ret;
-+
-+	/* Figure out the master core */
-+	idx = BADIDX;
-+	switch (BUSTYPE(si->sb.bustype)) {
-+	case PCI_BUS:
-+		idx = si->sb.buscoreidx;
-+		break;
-+	case JTAG_BUS:
-+		idx = SB_CC_IDX;
-+		break;
-+	case PCMCIA_BUS:
-+	case SDIO_BUS:
-+		idx = sb_findcoreidx(si, SB_PCMCIA, 0);
-+		break;
-+	case SB_BUS:
-+		if ((idx = sb_findcoreidx(si, SB_MIPS33, 0)) == BADIDX)
-+			idx = sb_findcoreidx(si, SB_MIPS, 0);
-+		break;
-+	default:
-+		ASSERT(0);
-+	}
-+	if (idx == BADIDX)
-+		return ret;
-+
-+	INTR_OFF(si, intr_val);
-+	origidx = sb_coreidx(sbh);
-+
-+	sb = REGS2SB(sb_setcoreidx(sbh, idx));
-+
-+	tmp = R_SBREG(si, &sb->sbimconfiglow);
-+	ret = tmp & TO_MASK;
-+	W_SBREG(si, &sb->sbimconfiglow, (tmp & ~TO_MASK) | to);
-+
-+	sb_commit(sbh);
-+	sb_setcoreidx(sbh, origidx);
-+	INTR_RESTORE(si, intr_val);
-+	return ret;
-+}
-+
-+void
-+sb_core_disable(sb_t *sbh, uint32 bits)
-+{
-+	sb_info_t *si;
-+	volatile uint32 dummy;
-+	uint32 rej;
-+	sbconfig_t *sb;
-+
-+	si = SB_INFO(sbh);
-+
-+	ASSERT(GOODREGS(si->curmap));
-+	sb = REGS2SB(si->curmap);
-+
-+	/* if core is already in reset, just return */
-+	if (R_SBREG(si, &sb->sbtmstatelow) & SBTML_RESET)
-+		return;
-+
-+	/* reject value changed between sonics 2.2 and 2.3 */
-+	if (si->sb.sonicsrev == SONICS_2_2)
-+		rej = (1 << SBTML_REJ_SHIFT);
-+	else
-+		rej = (2 << SBTML_REJ_SHIFT);
-+
-+	/* if clocks are not enabled, put into reset and return */
-+	if ((R_SBREG(si, &sb->sbtmstatelow) & SBTML_CLK) == 0)
-+		goto disable;
-+
-+	/* set target reject and spin until busy is clear (preserve core-specific bits) */
-+	OR_SBREG(si, &sb->sbtmstatelow, rej);
-+	dummy = R_SBREG(si, &sb->sbtmstatelow);
-+	OSL_DELAY(1);
-+	SPINWAIT((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000);
-+	if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY)
-+		SB_ERROR(("%s: target state still busy\n", __FUNCTION__));
-+
-+	if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) {
-+		OR_SBREG(si, &sb->sbimstate, SBIM_RJ);
-+		dummy = R_SBREG(si, &sb->sbimstate);
-+		OSL_DELAY(1);
-+		SPINWAIT((R_SBREG(si, &sb->sbimstate) & SBIM_BY), 100000);
-+	}
-+
-+	/* set reset and reject while enabling the clocks */
-+	W_SBREG(si, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | rej | SBTML_RESET));
-+	dummy = R_SBREG(si, &sb->sbtmstatelow);
-+	OSL_DELAY(10);
-+
-+	/* don't forget to clear the initiator reject bit */
-+	if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT)
-+		AND_SBREG(si, &sb->sbimstate, ~SBIM_RJ);
-+
-+disable:
-+	/* leave reset and reject asserted */
-+	W_SBREG(si, &sb->sbtmstatelow, (bits | rej | SBTML_RESET));
-+	OSL_DELAY(1);
-+}
-+
-+/* set chip watchdog reset timer to fire in 'ticks' backplane cycles */
-+void
-+sb_watchdog(sb_t *sbh, uint ticks)
-+{
-+	sb_info_t *si = SB_INFO(sbh);
-+
-+	/* make sure we come up in fast clock mode */
-+	sb_clkctl_clk(sbh, CLK_FAST);
-+
-+	/* instant NMI */
-+	switch (si->gpioid) {
-+	case SB_CC:
-+#ifdef __mips__
-+		if (sb_chip(sbh) == BCM4785_CHIP_ID && ticks <= 1)
-+			MTC0(C0_BROADCOM, 4, (1 << 22));
-+#endif	/* __mips__ */
-+		sb_corereg(si, 0, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
-+#ifdef __mips__
-+		if (sb_chip(sbh) == BCM4785_CHIP_ID && ticks <= 1) {
-+			__asm__ __volatile__ (
-+				".set\tmips3\n\t"
-+				"sync\n\t"
-+				"wait\n\t"
-+				".set\tmips0"
-+			);
-+			while (1);
-+		}
-+#endif	/* __mips__ */
-+		break;
-+	case SB_EXTIF:
-+		sb_corereg(si, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks);
-+		break;
-+	}
-+}
-+
-+/* initialize the pcmcia core */
-+void
-+sb_pcmcia_init(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint8 cor = 0;
-+
-+	si = SB_INFO(sbh);
-+
-+	/* enable d11 mac interrupts */
-+	OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
-+	cor |= COR_IRQEN | COR_FUNEN;
-+	OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
-+
-+}
-+
-+
-+/*
-+ * Configure the pci core for pci client (NIC) action
-+ * coremask is the bitvec of cores by index to be enabled.
-+ */
-+void
-+BCMINITFN(sb_pci_setup)(sb_t *sbh, uint coremask)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+	sbpciregs_t *pciregs;
-+	uint32 sbflag;
-+	uint32 w;
-+	uint idx;
-+	int reg_val;
-+
-+	si = SB_INFO(sbh);
-+
-+	/* if not pci bus, we're done */
-+	if (BUSTYPE(si->sb.bustype) != PCI_BUS)
-+		return;
-+
-+	ASSERT(PCI(si) || PCIE(si));
-+	ASSERT(si->sb.buscoreidx != BADIDX);
-+
-+	/* get current core index */
-+	idx = si->curidx;
-+
-+	/* we interrupt on this backplane flag number */
-+	ASSERT(GOODREGS(si->curmap));
-+	sb = REGS2SB(si->curmap);
-+	sbflag = R_SBREG(si, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
-+
-+	/* switch over to pci core */
-+	pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->sb.buscoreidx);
-+	sb = REGS2SB(pciregs);
-+
-+	/*
-+	 * Enable sb->pci interrupts.  Assume
-+	 * PCI rev 2.3 support was added in pci core rev 6 and things changed..
-+	 */
-+	if (PCIE(si) || (PCI(si) && ((si->sb.buscorerev) >= 6))) {
-+		/* pci config write to set this core bit in PCIIntMask */
-+		w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32));
-+		w |= (coremask << PCI_SBIM_SHIFT);
-+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w);
-+	} else {
-+		/* set sbintvec bit for our flag number */
-+		OR_SBREG(si, &sb->sbintvec, (1 << sbflag));
-+	}
-+
-+	if (PCI(si)) {
-+		OR_REG(si->osh, &pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST));
-+		if (si->sb.buscorerev >= 11)
-+			OR_REG(si->osh, &pciregs->sbtopci2, SBTOPCI_RC_READMULTI);
-+		if (si->sb.buscorerev < 5) {
-+			SET_SBREG(si, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+				(0x3 << SBIMCL_RTO_SHIFT) | 0x2);
-+			sb_commit(sbh);
-+		}
-+	}
-+
-+#ifdef PCIE_SUPPOER
-+	/* PCIE workarounds */
-+	if (PCIE(si)) {
-+		if ((si->sb.buscorerev == 0) || (si->sb.buscorerev == 1)) {
-+			reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS,
-+				PCIE_TLP_WORKAROUNDSREG);
-+			reg_val |= 0x8;
-+			sb_pcie_writereg((void *)sbh, (void *)PCIE_PCIEREGS,
-+				PCIE_TLP_WORKAROUNDSREG, reg_val);
-+		}
-+
-+		if (si->sb.buscorerev == 1) {
-+			reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS,
-+				PCIE_DLLP_LCREG);
-+			reg_val |= (0x40);
-+			sb_pcie_writereg(sbh, (void *)PCIE_PCIEREGS, PCIE_DLLP_LCREG, reg_val);
-+		}
-+
-+		if (si->sb.buscorerev == 0)
-+			sb_war30841(si);
-+	}
-+#endif
-+
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
-+}
-+
-+uint32
-+sb_base(uint32 admatch)
-+{
-+	uint32 base;
-+	uint type;
-+
-+	type = admatch & SBAM_TYPE_MASK;
-+	ASSERT(type < 3);
-+
-+	base = 0;
-+
-+	if (type == 0) {
-+		base = admatch & SBAM_BASE0_MASK;
-+	} else if (type == 1) {
-+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
-+		base = admatch & SBAM_BASE1_MASK;
-+	} else if (type == 2) {
-+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
-+		base = admatch & SBAM_BASE2_MASK;
-+	}
-+
-+	return (base);
-+}
-+
-+uint32
-+sb_size(uint32 admatch)
-+{
-+	uint32 size;
-+	uint type;
-+
-+	type = admatch & SBAM_TYPE_MASK;
-+	ASSERT(type < 3);
-+
-+	size = 0;
-+
-+	if (type == 0) {
-+		size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1);
-+	} else if (type == 1) {
-+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
-+		size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1);
-+	} else if (type == 2) {
-+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
-+		size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1);
-+	}
-+
-+	return (size);
-+}
-+
-+/* return the core-type instantiation # of the current core */
-+uint
-+sb_coreunit(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint idx;
-+	uint coreid;
-+	uint coreunit;
-+	uint i;
-+
-+	si = SB_INFO(sbh);
-+	coreunit = 0;
-+
-+	idx = si->curidx;
-+
-+	ASSERT(GOODREGS(si->curmap));
-+	coreid = sb_coreid(sbh);
-+
-+	/* count the cores of our type */
-+	for (i = 0; i < idx; i++)
-+		if (si->coreid[i] == coreid)
-+			coreunit++;
-+
-+	return (coreunit);
-+}
-+
-+static INLINE uint32
-+factor6(uint32 x)
-+{
-+	switch (x) {
-+	case CC_F6_2:	return 2;
-+	case CC_F6_3:	return 3;
-+	case CC_F6_4:	return 4;
-+	case CC_F6_5:	return 5;
-+	case CC_F6_6:	return 6;
-+	case CC_F6_7:	return 7;
-+	default:	return 0;
-+	}
-+}
-+
-+/* calculate the speed the SB would run at given a set of clockcontrol values */
-+uint32
-+sb_clock_rate(uint32 pll_type, uint32 n, uint32 m)
-+{
-+	uint32 n1, n2, clock, m1, m2, m3, mc;
-+
-+	n1 = n & CN_N1_MASK;
-+	n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT;
-+
-+	if (pll_type == PLL_TYPE6) {
-+		if (m & CC_T6_MMASK)
-+			return CC_T6_M1;
-+		else
-+			return CC_T6_M0;
-+	} else if ((pll_type == PLL_TYPE1) ||
-+	           (pll_type == PLL_TYPE3) ||
-+	           (pll_type == PLL_TYPE4) ||
-+	           (pll_type == PLL_TYPE7)) {
-+		n1 = factor6(n1);
-+		n2 += CC_F5_BIAS;
-+	} else if (pll_type == PLL_TYPE2) {
-+		n1 += CC_T2_BIAS;
-+		n2 += CC_T2_BIAS;
-+		ASSERT((n1 >= 2) && (n1 <= 7));
-+		ASSERT((n2 >= 5) && (n2 <= 23));
-+	} else if (pll_type == PLL_TYPE5) {
-+		return (100000000);
-+	} else
-+		ASSERT(0);
-+	/* PLL types 3 and 7 use BASE2 (25Mhz) */
-+	if ((pll_type == PLL_TYPE3) ||
-+	    (pll_type == PLL_TYPE7)) {
-+		clock =  CC_CLOCK_BASE2 * n1 * n2;
-+	} else
-+		clock = CC_CLOCK_BASE1 * n1 * n2;
-+
-+	if (clock == 0)
-+		return 0;
-+
-+	m1 = m & CC_M1_MASK;
-+	m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT;
-+	m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
-+	mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
-+
-+	if ((pll_type == PLL_TYPE1) ||
-+	    (pll_type == PLL_TYPE3) ||
-+	    (pll_type == PLL_TYPE4) ||
-+	    (pll_type == PLL_TYPE7)) {
-+		m1 = factor6(m1);
-+		if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE3))
-+			m2 += CC_F5_BIAS;
-+		else
-+			m2 = factor6(m2);
-+		m3 = factor6(m3);
-+
-+		switch (mc) {
-+		case CC_MC_BYPASS:	return (clock);
-+		case CC_MC_M1:		return (clock / m1);
-+		case CC_MC_M1M2:	return (clock / (m1 * m2));
-+		case CC_MC_M1M2M3:	return (clock / (m1 * m2 * m3));
-+		case CC_MC_M1M3:	return (clock / (m1 * m3));
-+		default:		return (0);
-+		}
-+	} else {
-+		ASSERT(pll_type == PLL_TYPE2);
-+
-+		m1 += CC_T2_BIAS;
-+		m2 += CC_T2M2_BIAS;
-+		m3 += CC_T2_BIAS;
-+		ASSERT((m1 >= 2) && (m1 <= 7));
-+		ASSERT((m2 >= 3) && (m2 <= 10));
-+		ASSERT((m3 >= 2) && (m3 <= 7));
-+
-+		if ((mc & CC_T2MC_M1BYP) == 0)
-+			clock /= m1;
-+		if ((mc & CC_T2MC_M2BYP) == 0)
-+			clock /= m2;
-+		if ((mc & CC_T2MC_M3BYP) == 0)
-+			clock /= m3;
-+
-+		return (clock);
-+	}
-+}
-+
-+/* returns the current speed the SB is running at */
-+uint32
-+sb_clock(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	extifregs_t *eir;
-+	chipcregs_t *cc;
-+	uint32 n, m;
-+	uint idx;
-+	uint32 pll_type, rate;
-+	uint intr_val = 0;
-+
-+	si = SB_INFO(sbh);
-+	idx = si->curidx;
-+	pll_type = PLL_TYPE1;
-+
-+	INTR_OFF(si, intr_val);
-+
-+	/* switch to extif or chipc core */
-+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+		n = R_REG(si->osh, &eir->clockcontrol_n);
-+		m = R_REG(si->osh, &eir->clockcontrol_sb);
-+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+		pll_type = R_REG(si->osh, &cc->capabilities) & CAP_PLL_MASK;
-+		if (pll_type == PLL_NONE) {
-+			INTR_RESTORE(si, intr_val);
-+			return 80000000;
-+		}
-+		n = R_REG(si->osh, &cc->clockcontrol_n);
-+		if (pll_type == PLL_TYPE6)
-+			m = R_REG(si->osh, &cc->clockcontrol_m3);
-+		else if ((pll_type == PLL_TYPE3) && !(BCMINIT(sb_chip)(sbh) == 0x5365))
-+			m = R_REG(si->osh, &cc->clockcontrol_m2);
-+		else
-+			m = R_REG(si->osh, &cc->clockcontrol_sb);
-+	} else {
-+		INTR_RESTORE(si, intr_val);
-+		return 0;
-+	}
-+
-+	/* calculate rate */
-+	if (BCMINIT(sb_chip)(sbh) == 0x5365)
-+		rate = 100000000;
-+	else {
-+		rate = sb_clock_rate(pll_type, n, m);
-+
-+		if (pll_type == PLL_TYPE3)
-+			rate = rate / 2;
-+	}
-+
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
-+
-+	INTR_RESTORE(si, intr_val);
-+
-+	return rate;
-+}
-+
-+/* change logical "focus" to the gpio core for optimized access */
-+void*
-+sb_gpiosetcore(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	return (sb_setcoreidx(sbh, si->gpioidx));
-+}
-+
-+/* mask&set gpiocontrol bits */
-+uint32
-+sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
-+{
-+	sb_info_t *si;
-+	uint regoff;
-+
-+	si = SB_INFO(sbh);
-+	regoff = 0;
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* gpios could be shared on router platforms */
-+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
-+		mask = priority ? (sb_gpioreservation & mask) :
-+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
-+		val &= mask;
-+	}
-+
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpiocontrol);
-+		break;
-+
-+	case SB_PCI:
-+		regoff = OFFSETOF(sbpciregs_t, gpiocontrol);
-+		break;
-+
-+	case SB_EXTIF:
-+		return (0);
-+	}
-+
-+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
-+}
-+
-+/* mask&set gpio output enable bits */
-+uint32
-+sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
-+{
-+	sb_info_t *si;
-+	uint regoff;
-+
-+	si = SB_INFO(sbh);
-+	regoff = 0;
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* gpios could be shared on router platforms */
-+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
-+		mask = priority ? (sb_gpioreservation & mask) :
-+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
-+		val &= mask;
-+	}
-+
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpioouten);
-+		break;
-+
-+	case SB_PCI:
-+		regoff = OFFSETOF(sbpciregs_t, gpioouten);
-+		break;
-+
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpio[0].outen);
-+		break;
-+	}
-+
-+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
-+}
-+
-+/* mask&set gpio output bits */
-+uint32
-+sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
-+{
-+	sb_info_t *si;
-+	uint regoff;
-+
-+	si = SB_INFO(sbh);
-+	regoff = 0;
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* gpios could be shared on router platforms */
-+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
-+		mask = priority ? (sb_gpioreservation & mask) :
-+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
-+		val &= mask;
-+	}
-+
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpioout);
-+		break;
-+
-+	case SB_PCI:
-+		regoff = OFFSETOF(sbpciregs_t, gpioout);
-+		break;
-+
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpio[0].out);
-+		break;
-+	}
-+
-+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
-+}
-+
-+/* reserve one gpio */
-+uint32
-+sb_gpioreserve(sb_t *sbh, uint32 gpio_bitmask, uint8 priority)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* only cores on SB_BUS share GPIO's and only applcation users need to
-+	 * reserve/release GPIO
-+	 */
-+	if ((BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority))  {
-+		ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority));
-+		return -1;
-+	}
-+	/* make sure only one bit is set */
-+	if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
-+		ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1)));
-+		return -1;
-+	}
-+
-+	/* already reserved */
-+	if (sb_gpioreservation & gpio_bitmask)
-+		return -1;
-+	/* set reservation */
-+	sb_gpioreservation |= gpio_bitmask;
-+
-+	return sb_gpioreservation;
-+}
-+
-+/* release one gpio */
-+/* 
-+ * releasing the gpio doesn't change the current value on the GPIO last write value
-+ * persists till some one overwrites it
-+*/
-+
-+uint32
-+sb_gpiorelease(sb_t *sbh, uint32 gpio_bitmask, uint8 priority)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* only cores on SB_BUS share GPIO's and only applcation users need to
-+	 * reserve/release GPIO
-+	 */
-+	if ((BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority))  {
-+		ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority));
-+		return -1;
-+	}
-+	/* make sure only one bit is set */
-+	if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
-+		ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1)));
-+		return -1;
-+	}
-+
-+	/* already released */
-+	if (!(sb_gpioreservation & gpio_bitmask))
-+		return -1;
-+
-+	/* clear reservation */
-+	sb_gpioreservation &= ~gpio_bitmask;
-+
-+	return sb_gpioreservation;
-+}
-+
-+/* return the current gpioin register value */
-+uint32
-+sb_gpioin(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint regoff;
-+
-+	si = SB_INFO(sbh);
-+	regoff = 0;
-+
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpioin);
-+		break;
-+
-+	case SB_PCI:
-+		regoff = OFFSETOF(sbpciregs_t, gpioin);
-+		break;
-+
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpioin);
-+		break;
-+	}
-+
-+	return (sb_corereg(si, si->gpioidx, regoff, 0, 0));
-+}
-+
-+/* mask&set gpio interrupt polarity bits */
-+uint32
-+sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
-+{
-+	sb_info_t *si;
-+	uint regoff;
-+
-+	si = SB_INFO(sbh);
-+	regoff = 0;
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* gpios could be shared on router platforms */
-+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
-+		mask = priority ? (sb_gpioreservation & mask) :
-+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
-+		val &= mask;
-+	}
-+
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
-+		break;
-+
-+	case SB_PCI:
-+		/* pci gpio implementation does not support interrupt polarity */
-+		ASSERT(0);
-+		break;
-+
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpiointpolarity);
-+		break;
-+	}
-+
-+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
-+}
-+
-+/* mask&set gpio interrupt mask bits */
-+uint32
-+sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
-+{
-+	sb_info_t *si;
-+	uint regoff;
-+
-+	si = SB_INFO(sbh);
-+	regoff = 0;
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* gpios could be shared on router platforms */
-+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
-+		mask = priority ? (sb_gpioreservation & mask) :
-+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
-+		val &= mask;
-+	}
-+
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpiointmask);
-+		break;
-+
-+	case SB_PCI:
-+		/* pci gpio implementation does not support interrupt mask */
-+		ASSERT(0);
-+		break;
-+
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpiointmask);
-+		break;
-+	}
-+
-+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
-+}
-+
-+/* assign the gpio to an led */
-+uint32
-+sb_gpioled(sb_t *sbh, uint32 mask, uint32 val)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	if (si->sb.ccrev < 16)
-+		return -1;
-+
-+	/* gpio led powersave reg */
-+	return (sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask, val));
-+}
-+
-+/* mask & set gpio timer val */
-+uint32
-+sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 gpiotimerval)
-+{
-+	sb_info_t *si;
-+	si = SB_INFO(sbh);
-+
-+	if (si->sb.ccrev < 16)
-+		return -1;
-+
-+	return (sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), mask, gpiotimerval));
-+}
-+
-+
-+/* return the slow clock source - LPO, XTAL, or PCI */
-+static uint
-+sb_slowclk_src(sb_info_t *si)
-+{
-+	chipcregs_t *cc;
-+
-+
-+	ASSERT(sb_coreid(&si->sb) == SB_CC);
-+
-+	if (si->sb.ccrev < 6) {
-+		if ((BUSTYPE(si->sb.bustype) == PCI_BUS) &&
-+		    (OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32)) &
-+		     PCI_CFG_GPIO_SCS))
-+			return (SCC_SS_PCI);
-+		else
-+			return (SCC_SS_XTAL);
-+	} else if (si->sb.ccrev < 10) {
-+		cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx);
-+		return (R_REG(si->osh, &cc->slow_clk_ctl) & SCC_SS_MASK);
-+	} else	/* Insta-clock */
-+		return (SCC_SS_XTAL);
-+}
-+
-+/* return the ILP (slowclock) min or max frequency */
-+static uint
-+sb_slowclk_freq(sb_info_t *si, bool max)
-+{
-+	chipcregs_t *cc;
-+	uint32 slowclk;
-+	uint div;
-+
-+
-+	ASSERT(sb_coreid(&si->sb) == SB_CC);
-+
-+	cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx);
-+
-+	/* shouldn't be here unless we've established the chip has dynamic clk control */
-+	ASSERT(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL);
-+
-+	slowclk = sb_slowclk_src(si);
-+	if (si->sb.ccrev < 6) {
-+		if (slowclk == SCC_SS_PCI)
-+			return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64));
-+		else
-+			return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32));
-+	} else if (si->sb.ccrev < 10) {
-+		div = 4 * (((R_REG(si->osh, &cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1);
-+		if (slowclk == SCC_SS_LPO)
-+			return (max? LPOMAXFREQ : LPOMINFREQ);
-+		else if (slowclk == SCC_SS_XTAL)
-+			return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div));
-+		else if (slowclk == SCC_SS_PCI)
-+			return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div));
-+		else
-+			ASSERT(0);
-+	} else {
-+		/* Chipc rev 10 is InstaClock */
-+		div = R_REG(si->osh, &cc->system_clk_ctl) >> SYCC_CD_SHIFT;
-+		div = 4 * (div + 1);
-+		return (max ? XTALMAXFREQ : (XTALMINFREQ/div));
-+	}
-+	return (0);
-+}
-+
-+static void
-+BCMINITFN(sb_clkctl_setdelay)(sb_info_t *si, void *chipcregs)
-+{
-+	chipcregs_t * cc;
-+	uint slowmaxfreq, pll_delay, slowclk;
-+	uint pll_on_delay, fref_sel_delay;
-+
-+	pll_delay = PLL_DELAY;
-+
-+	/* If the slow clock is not sourced by the xtal then add the xtal_on_delay
-+	 * since the xtal will also be powered down by dynamic clk control logic.
-+	 */
-+
-+	slowclk = sb_slowclk_src(si);
-+	if (slowclk != SCC_SS_XTAL)
-+		pll_delay += XTAL_ON_DELAY;
-+
-+	/* Starting with 4318 it is ILP that is used for the delays */
-+	slowmaxfreq = sb_slowclk_freq(si, (si->sb.ccrev >= 10) ? FALSE : TRUE);
-+
-+	pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
-+	fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
-+
-+	cc = (chipcregs_t *)chipcregs;
-+	W_REG(si->osh, &cc->pll_on_delay, pll_on_delay);
-+	W_REG(si->osh, &cc->fref_sel_delay, fref_sel_delay);
-+}
-+
-+/* initialize power control delay registers */
-+void
-+BCMINITFN(sb_clkctl_init)(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	chipcregs_t *cc;
-+
-+	si = SB_INFO(sbh);
-+
-+	origidx = si->curidx;
-+
-+	if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
-+		return;
-+
-+	if ((si->sb.chip == BCM4321_CHIP_ID) && (si->sb.chiprev < 2))
-+		W_REG(si->osh, &cc->chipcontrol,
-+		      (si->sb.chiprev == 0) ? CHIPCTRL_4321A0_DEFAULT : CHIPCTRL_4321A1_DEFAULT);
-+
-+	if (!(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL))
-+		goto done;
-+
-+	/* set all Instaclk chip ILP to 1 MHz */
-+	else if (si->sb.ccrev >= 10)
-+		SET_REG(si->osh, &cc->system_clk_ctl, SYCC_CD_MASK,
-+		        (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
-+
-+	sb_clkctl_setdelay(si, (void *)cc);
-+
-+done:
-+	sb_setcoreidx(sbh, origidx);
-+}
-+
-+/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
-+uint16
-+sb_clkctl_fast_pwrup_delay(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	chipcregs_t *cc;
-+	uint slowminfreq;
-+	uint16 fpdelay;
-+	uint intr_val = 0;
-+
-+	si = SB_INFO(sbh);
-+	fpdelay = 0;
-+	origidx = si->curidx;
-+
-+	INTR_OFF(si, intr_val);
-+
-+	if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
-+		goto done;
-+
-+	if (!(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL))
-+		goto done;
-+
-+	slowminfreq = sb_slowclk_freq(si, FALSE);
-+	fpdelay = (((R_REG(si->osh, &cc->pll_on_delay) + 2) * 1000000) +
-+	           (slowminfreq - 1)) / slowminfreq;
-+
-+done:
-+	sb_setcoreidx(sbh, origidx);
-+	INTR_RESTORE(si, intr_val);
-+	return (fpdelay);
-+}
-+
-+/* turn primary xtal and/or pll off/on */
-+int
-+sb_clkctl_xtal(sb_t *sbh, uint what, bool on)
-+{
-+	sb_info_t *si;
-+	uint32 in, out, outen;
-+
-+	si = SB_INFO(sbh);
-+
-+	switch (BUSTYPE(si->sb.bustype)) {
-+
-+
-+		case PCMCIA_BUS:
-+			return (0);
-+
-+
-+		case PCI_BUS:
-+
-+			/* pcie core doesn't have any mapping to control the xtal pu */
-+			if (PCIE(si))
-+				return -1;
-+
-+			in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof(uint32));
-+			out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32));
-+			outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof(uint32));
-+
-+			/*
-+			 * Avoid glitching the clock if GPRS is already using it.
-+			 * We can't actually read the state of the PLLPD so we infer it
-+			 * by the value of XTAL_PU which *is* readable via gpioin.
-+			 */
-+			if (on && (in & PCI_CFG_GPIO_XTAL))
-+				return (0);
-+
-+			if (what & XTAL)
-+				outen |= PCI_CFG_GPIO_XTAL;
-+			if (what & PLL)
-+				outen |= PCI_CFG_GPIO_PLL;
-+
-+			if (on) {
-+				/* turn primary xtal on */
-+				if (what & XTAL) {
-+					out |= PCI_CFG_GPIO_XTAL;
-+					if (what & PLL)
-+						out |= PCI_CFG_GPIO_PLL;
-+					OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT,
-+					                     sizeof(uint32), out);
-+					OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN,
-+					                     sizeof(uint32), outen);
-+					OSL_DELAY(XTAL_ON_DELAY);
-+				}
-+
-+				/* turn pll on */
-+				if (what & PLL) {
-+					out &= ~PCI_CFG_GPIO_PLL;
-+					OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT,
-+					                     sizeof(uint32), out);
-+					OSL_DELAY(2000);
-+				}
-+			} else {
-+				if (what & XTAL)
-+					out &= ~PCI_CFG_GPIO_XTAL;
-+				if (what & PLL)
-+					out |= PCI_CFG_GPIO_PLL;
-+				OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32), out);
-+				OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof(uint32),
-+				                     outen);
-+			}
-+
-+		default:
-+			return (-1);
-+	}
-+
-+	return (0);
-+}
-+
-+/* set dynamic clk control mode (forceslow, forcefast, dynamic) */
-+/*   returns true if we are forcing fast clock */
-+bool
-+sb_clkctl_clk(sb_t *sbh, uint mode)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	chipcregs_t *cc;
-+	uint32 scc;
-+	uint intr_val = 0;
-+
-+	si = SB_INFO(sbh);
-+
-+	/* chipcommon cores prior to rev6 don't support dynamic clock control */
-+	if (si->sb.ccrev < 6)
-+		return (FALSE);
-+
-+
-+	/* Chips with ccrev 10 are EOL and they don't have SYCC_HR which we use below */
-+	ASSERT(si->sb.ccrev != 10);
-+
-+	INTR_OFF(si, intr_val);
-+
-+	origidx = si->curidx;
-+
-+	if (sb_setcore(sbh, SB_MIPS33, 0) && (sb_corerev(&si->sb) <= 7) &&
-+	    (BUSTYPE(si->sb.bustype) == SB_BUS) && (si->sb.ccrev >= 10))
-+		goto done;
-+
-+	/* PR32414WAR  "Force HT clock on" all the time, no dynamic clk ctl */
-+	if ((si->sb.chip == BCM4311_CHIP_ID) && (si->sb.chiprev <= 1))
-+		goto done;
-+
-+	cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
-+	ASSERT(cc != NULL);
-+
-+	if (!(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL))
-+		goto done;
-+
-+	switch (mode) {
-+	case CLK_FAST:	/* force fast (pll) clock */
-+		if (si->sb.ccrev < 10) {
-+			/* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
-+			sb_clkctl_xtal(&si->sb, XTAL, ON);
-+
-+			SET_REG(si->osh, &cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
-+		} else
-+			OR_REG(si->osh, &cc->system_clk_ctl, SYCC_HR);
-+		/* wait for the PLL */
-+		OSL_DELAY(PLL_DELAY);
-+		break;
-+
-+	case CLK_DYNAMIC:	/* enable dynamic clock control */
-+
-+		if (si->sb.ccrev < 10) {
-+			scc = R_REG(si->osh, &cc->slow_clk_ctl);
-+			scc &= ~(SCC_FS | SCC_IP | SCC_XC);
-+			if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
-+				scc |= SCC_XC;
-+			W_REG(si->osh, &cc->slow_clk_ctl, scc);
-+
-+			/* for dynamic control, we have to release our xtal_pu "force on" */
-+			if (scc & SCC_XC)
-+				sb_clkctl_xtal(&si->sb, XTAL, OFF);
-+		} else {
-+			/* Instaclock */
-+			AND_REG(si->osh, &cc->system_clk_ctl, ~SYCC_HR);
-+		}
-+		break;
-+
-+	default:
-+		ASSERT(0);
-+	}
-+
-+done:
-+	sb_setcoreidx(sbh, origidx);
-+	INTR_RESTORE(si, intr_val);
-+	return (mode == CLK_FAST);
-+}
-+
-+/* register driver interrupt disabling and restoring callback functions */
-+void
-+sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn,
-+                          void *intrsenabled_fn, void *intr_arg)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	si->intr_arg = intr_arg;
-+	si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn;
-+	si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn;
-+	si->intrsenabled_fn = (sb_intrsenabled_t)intrsenabled_fn;
-+	/* save current core id.  when this function called, the current core
-+	 * must be the core which provides driver functions(il, et, wl, etc.)
-+	 */
-+	si->dev_coreid = si->coreid[si->curidx];
-+}
-+
-+
-+int
-+sb_corepciid(sb_t *sbh, uint func, uint16 *pcivendor, uint16 *pcidevice,
-+             uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif,
-+             uint8 *pciheader)
-+{
-+	uint16 vendor = 0xffff, device = 0xffff;
-+	uint core, unit;
-+	uint chip, chippkg;
-+	uint nfunc;
-+	char varname[SB_DEVPATH_BUFSZ + 8];
-+	uint8 class, subclass, progif;
-+	char devpath[SB_DEVPATH_BUFSZ];
-+	uint8 header;
-+
-+	core = sb_coreid(sbh);
-+	unit = sb_coreunit(sbh);
-+
-+	chip = sb_chip(sbh);
-+	chippkg = sb_chippkg(sbh);
-+
-+	progif = 0;
-+	header = PCI_HEADER_NORMAL;
-+
-+	/* Verify whether the function exists for the core */
-+	nfunc = (core == SB_USB20H) ? 2 : 1;
-+	if (func >= nfunc)
-+		return BCME_ERROR;
-+
-+	/* Known vendor translations */
-+	switch (sb_corevendor(sbh)) {
-+	case SB_VEND_BCM:
-+		vendor = VENDOR_BROADCOM;
-+		break;
-+	default:
-+		return BCME_ERROR;
-+	}
-+
-+	/* Determine class based on known core codes */
-+	switch (core) {
-+	case SB_ILINE20:
-+		class = PCI_CLASS_NET;
-+		subclass = PCI_NET_ETHER;
-+		device = BCM47XX_ILINE_ID;
-+		break;
-+	case SB_ENET:
-+		class = PCI_CLASS_NET;
-+		subclass = PCI_NET_ETHER;
-+		device = BCM47XX_ENET_ID;
-+		break;
-+	case SB_GIGETH:
-+		class = PCI_CLASS_NET;
-+		subclass = PCI_NET_ETHER;
-+		device = BCM47XX_GIGETH_ID;
-+		break;
-+	case SB_SDRAM:
-+	case SB_MEMC:
-+		class = PCI_CLASS_MEMORY;
-+		subclass = PCI_MEMORY_RAM;
-+		device = (uint16)core;
-+		break;
-+	case SB_PCI:
-+	case SB_PCIE:
-+		class = PCI_CLASS_BRIDGE;
-+		subclass = PCI_BRIDGE_PCI;
-+		device = (uint16)core;
-+		header = PCI_HEADER_BRIDGE;
-+		break;
-+	case SB_MIPS:
-+	case SB_MIPS33:
-+		class = PCI_CLASS_CPU;
-+		subclass = PCI_CPU_MIPS;
-+		device = (uint16)core;
-+		break;
-+	case SB_CODEC:
-+		class = PCI_CLASS_COMM;
-+		subclass = PCI_COMM_MODEM;
-+		device = BCM47XX_V90_ID;
-+		break;
-+	case SB_USB:
-+		class = PCI_CLASS_SERIAL;
-+		subclass = PCI_SERIAL_USB;
-+		progif = 0x10; /* OHCI */
-+		device = BCM47XX_USB_ID;
-+		break;
-+	case SB_USB11H:
-+		class = PCI_CLASS_SERIAL;
-+		subclass = PCI_SERIAL_USB;
-+		progif = 0x10; /* OHCI */
-+		device = BCM47XX_USBH_ID;
-+		break;
-+	case SB_USB20H:
-+		class = PCI_CLASS_SERIAL;
-+		subclass = PCI_SERIAL_USB;
-+		progif = func == 0 ? 0x10 : 0x20; /* OHCI/EHCI */
-+		device = BCM47XX_USB20H_ID;
-+		header = 0x80; /* multifunction */
-+		break;
-+	case SB_USB11D:
-+		class = PCI_CLASS_SERIAL;
-+		subclass = PCI_SERIAL_USB;
-+		device = BCM47XX_USBD_ID;
-+		break;
-+	case SB_USB20D:
-+		class = PCI_CLASS_SERIAL;
-+		subclass = PCI_SERIAL_USB;
-+		device = BCM47XX_USB20D_ID;
-+		break;
-+	case SB_IPSEC:
-+		class = PCI_CLASS_CRYPT;
-+		subclass = PCI_CRYPT_NETWORK;
-+		device = BCM47XX_IPSEC_ID;
-+		break;
-+	case SB_ROBO:
-+		class = PCI_CLASS_NET;
-+		subclass = PCI_NET_OTHER;
-+		device = BCM47XX_ROBO_ID;
-+		break;
-+	case SB_EXTIF:
-+	case SB_CC:
-+		class = PCI_CLASS_MEMORY;
-+		subclass = PCI_MEMORY_FLASH;
-+		device = (uint16)core;
-+		break;
-+	case SB_D11:
-+		class = PCI_CLASS_NET;
-+		subclass = PCI_NET_OTHER;
-+		/* Let nvram variable override core ID */
-+		sb_devpath(sbh, devpath, sizeof(devpath));
-+		sprintf(varname, "%sdevid", devpath);
-+		if ((device = (uint16)getintvar(NULL, varname)))
-+			break;
-+		/*
-+		* no longer support wl%did, but keep the code
-+		* here for backward compatibility.
-+		*/
-+		sprintf(varname, "wl%did", unit);
-+		if ((device = (uint16)getintvar(NULL, varname)))
-+			break;
-+		/* Chip specific conversion */
-+		if (chip == BCM4712_CHIP_ID) {
-+			if (chippkg == BCM4712SMALL_PKG_ID)
-+				device = BCM4306_D11G_ID;
-+			else
-+				device = BCM4306_D11DUAL_ID;
-+			break;
-+		}
-+		/* ignore it */
-+		device = 0xffff;
-+		break;
-+	case SB_SATAXOR:
-+		class = PCI_CLASS_XOR;
-+		subclass = PCI_XOR_QDMA;
-+		device = BCM47XX_SATAXOR_ID;
-+		break;
-+	case SB_ATA100:
-+		class = PCI_CLASS_DASDI;
-+		subclass = PCI_DASDI_IDE;
-+		device = BCM47XX_ATA100_ID;
-+		break;
-+
-+	default:
-+		class = subclass = progif = 0xff;
-+		device = (uint16)core;
-+		break;
-+	}
-+
-+	*pcivendor = vendor;
-+	*pcidevice = device;
-+	*pciclass = class;
-+	*pcisubclass = subclass;
-+	*pciprogif = progif;
-+	*pciheader = header;
-+
-+	return 0;
-+}
-+
-+
-+
-+/* use the mdio interface to write to mdio slaves */
-+static int
-+sb_pcie_mdiowrite(sb_info_t *si,  uint physmedia, uint regaddr, uint val)
-+{
-+	uint mdiodata;
-+	uint i = 0;
-+	sbpcieregs_t *pcieregs;
-+
-+	pcieregs = (sbpcieregs_t*) sb_setcoreidx(&si->sb, si->sb.buscoreidx);
-+	ASSERT(pcieregs);
-+
-+	/* enable mdio access to SERDES */
-+	W_REG(si->osh, (&pcieregs->mdiocontrol), MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL);
-+
-+	mdiodata = MDIODATA_START | MDIODATA_WRITE |
-+		(physmedia << MDIODATA_DEVADDR_SHF) |
-+		(regaddr << MDIODATA_REGADDR_SHF) | MDIODATA_TA | val;
-+
-+	W_REG(si->osh, (&pcieregs->mdiodata), mdiodata);
-+
-+	PR28829_DELAY();
-+
-+	/* retry till the transaction is complete */
-+	while (i < 10) {
-+		if (R_REG(si->osh, &(pcieregs->mdiocontrol)) & MDIOCTL_ACCESS_DONE) {
-+			/* Disable mdio access to SERDES */
-+			W_REG(si->osh, (&pcieregs->mdiocontrol), 0);
-+			return 0;
-+		}
-+		OSL_DELAY(1000);
-+		i++;
-+	}
-+
-+	SB_ERROR(("sb_pcie_mdiowrite: timed out\n"));
-+	/* Disable mdio access to SERDES */
-+	W_REG(si->osh, (&pcieregs->mdiocontrol), 0);
-+	ASSERT(0);
-+	return 1;
-+
-+}
-+
-+/* indirect way to read pcie config regs */
-+uint
-+sb_pcie_readreg(void *sb, void* arg1, uint offset)
-+{
-+	sb_info_t *si;
-+	sb_t   *sbh;
-+	uint retval = 0xFFFFFFFF;
-+	sbpcieregs_t *pcieregs;
-+	uint addrtype;
-+
-+	sbh = (sb_t *)sb;
-+	si = SB_INFO(sbh);
-+	ASSERT(PCIE(si));
-+
-+	pcieregs = (sbpcieregs_t *)sb_setcore(sbh, SB_PCIE, 0);
-+	ASSERT(pcieregs);
-+
-+	addrtype = (uint)((uintptr)arg1);
-+	switch (addrtype) {
-+		case PCIE_CONFIGREGS:
-+			W_REG(si->osh, (&pcieregs->configaddr), offset);
-+			retval = R_REG(si->osh, &(pcieregs->configdata));
-+			break;
-+		case PCIE_PCIEREGS:
-+			W_REG(si->osh, &(pcieregs->pcieaddr), offset);
-+			retval = R_REG(si->osh, &(pcieregs->pciedata));
-+			break;
-+		default:
-+			ASSERT(0);
-+			break;
-+	}
-+	return retval;
-+}
-+
-+/* indirect way to write pcie config/mdio/pciecore regs */
-+uint
-+sb_pcie_writereg(sb_t *sbh, void *arg1,  uint offset, uint val)
-+{
-+	sb_info_t *si;
-+	sbpcieregs_t *pcieregs;
-+	uint addrtype;
-+
-+	si = SB_INFO(sbh);
-+	ASSERT(PCIE(si));
-+
-+	pcieregs = (sbpcieregs_t *)sb_setcore(sbh, SB_PCIE, 0);
-+	ASSERT(pcieregs);
-+
-+	addrtype = (uint)((uintptr)arg1);
-+
-+	switch (addrtype) {
-+		case PCIE_CONFIGREGS:
-+			W_REG(si->osh, (&pcieregs->configaddr), offset);
-+			W_REG(si->osh, (&pcieregs->configdata), val);
-+			break;
-+		case PCIE_PCIEREGS:
-+			W_REG(si->osh, (&pcieregs->pcieaddr), offset);
-+			W_REG(si->osh, (&pcieregs->pciedata), val);
-+			break;
-+		default:
-+			ASSERT(0);
-+			break;
-+	}
-+	return 0;
-+}
-+
-+/* Build device path. Support SB, PCI, and JTAG for now. */
-+int
-+sb_devpath(sb_t *sbh, char *path, int size)
-+{
-+	ASSERT(path);
-+	ASSERT(size >= SB_DEVPATH_BUFSZ);
-+
-+	switch (BUSTYPE((SB_INFO(sbh))->sb.bustype)) {
-+	case SB_BUS:
-+	case JTAG_BUS:
-+		sprintf(path, "sb/%u/", sb_coreidx(sbh));
-+		break;
-+	case PCI_BUS:
-+		ASSERT((SB_INFO(sbh))->osh);
-+		sprintf(path, "pci/%u/%u/", OSL_PCI_BUS((SB_INFO(sbh))->osh),
-+			OSL_PCI_SLOT((SB_INFO(sbh))->osh));
-+		break;
-+	case PCMCIA_BUS:
-+		SB_ERROR(("sb_devpath: OSL_PCMCIA_BUS() not implemented, bus 1 assumed\n"));
-+		SB_ERROR(("sb_devpath: OSL_PCMCIA_SLOT() not implemented, slot 1 assumed\n"));
-+		sprintf(path, "pc/%u/%u/", 1, 1);
-+		break;
-+	case SDIO_BUS:
-+		SB_ERROR(("sb_devpath: device 0 assumed\n"));
-+		sprintf(path, "sd/%u/", sb_coreidx(sbh));
-+		break;
-+	default:
-+		ASSERT(0);
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * Fixup SROMless PCI device's configuration.
-+ * The current core may be changed upon return.
-+ */
-+static int
-+sb_pci_fixcfg(sb_info_t *si)
-+{
-+	uint origidx, pciidx;
-+	sbpciregs_t *pciregs;
-+	sbpcieregs_t *pcieregs;
-+	uint16 val16, *reg16;
-+	char name[SB_DEVPATH_BUFSZ+16], *value;
-+	char devpath[SB_DEVPATH_BUFSZ];
-+
-+	ASSERT(BUSTYPE(si->sb.bustype) == PCI_BUS);
-+
-+	/* Fixup PI in SROM shadow area to enable the correct PCI core access */
-+	/* save the current index */
-+	origidx = sb_coreidx(&si->sb);
-+
-+	/* check 'pi' is correct and fix it if not */
-+	if (si->sb.buscoretype == SB_PCIE) {
-+		pcieregs = (sbpcieregs_t *)sb_setcore(&si->sb, SB_PCIE, 0);
-+		ASSERT(pcieregs);
-+		reg16 = &pcieregs->sprom[SRSH_PI_OFFSET];
-+	} else if (si->sb.buscoretype == SB_PCI) {
-+		pciregs = (sbpciregs_t *)sb_setcore(&si->sb, SB_PCI, 0);
-+		ASSERT(pciregs);
-+		reg16 = &pciregs->sprom[SRSH_PI_OFFSET];
-+	} else {
-+		ASSERT(0);
-+		return -1;
-+	}
-+	pciidx = sb_coreidx(&si->sb);
-+	val16 = R_REG(si->osh, reg16);
-+	if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != (uint16)pciidx) {
-+		val16 = (uint16)(pciidx << SRSH_PI_SHIFT) | (val16 & ~SRSH_PI_MASK);
-+		W_REG(si->osh, reg16, val16);
-+	}
-+
-+	/* restore the original index */
-+	sb_setcoreidx(&si->sb, origidx);
-+
-+	/*
-+	 * Fixup bar0window in PCI config space to make the core indicated
-+	 * by the nvram variable the current core.
-+	 * !Do it last, it may change the current core!
-+	 */
-+	if (sb_devpath(&si->sb, devpath, sizeof(devpath)))
-+		return -1;
-+	sprintf(name, "%sb0w", devpath);
-+	if ((value = getvar(NULL, name))) {
-+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32),
-+			bcm_strtoul(value, NULL, 16));
-+		/* update curidx since the current core is changed */
-+		si->curidx = _sb_coreidx(si);
-+		if (si->curidx == BADIDX) {
-+			SB_ERROR(("sb_pci_fixcfg: bad core index\n"));
-+			return -1;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static uint
-+sb_chipc_capability(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	/* Make sure that there is ChipCommon core present */
-+	if (si->coreid[SB_CC_IDX] == SB_CC)
-+		return (sb_corereg(si, SB_CC_IDX, OFFSETOF(chipcregs_t, capabilities),
-+		                   0, 0));
-+	return 0;
-+}
-+
-+/* Return ADDR64 capability of the backplane */
-+bool
-+sb_backplane64(sb_t *sbh)
-+{
-+	return ((sb_chipc_capability(sbh) & CAP_BKPLN64) != 0);
-+}
-+
-+void
-+sb_btcgpiowar(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	uint intr_val = 0;
-+	chipcregs_t *cc;
-+	si = SB_INFO(sbh);
-+
-+	/* Make sure that there is ChipCommon core present &&
-+	 * UART_TX is strapped to 1
-+	 */
-+	if (!(sb_chipc_capability(sbh) & CAP_UARTGPIO))
-+		return;
-+
-+	/* sb_corereg cannot be used as we have to guarantee 8-bit read/writes */
-+	INTR_OFF(si, intr_val);
-+
-+	origidx = sb_coreidx(sbh);
-+
-+	cc = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0);
-+	if (cc == NULL)
-+		goto end;
-+
-+	W_REG(si->osh, &cc->uart0mcr, R_REG(si->osh, &cc->uart0mcr) | 0x04);
-+
-+end:
-+	/* restore the original index */
-+	sb_setcoreidx(sbh, origidx);
-+
-+	INTR_RESTORE(si, intr_val);
-+}
-+
-+/* check if the device is removed */
-+bool
-+sb_deviceremoved(sb_t *sbh)
-+{
-+	uint32 w;
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	switch (BUSTYPE(si->sb.bustype)) {
-+	case PCI_BUS:
-+		ASSERT(si->osh);
-+		w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_VID, sizeof(uint32));
-+		if ((w & 0xFFFF) != VENDOR_BROADCOM)
-+			return TRUE;
-+		else
-+			return FALSE;
-+	default:
-+		return FALSE;
-+	}
-+	return FALSE;
-+}
-+
-+/* Return the RAM size of the SOCRAM core */
-+uint32
-+sb_socram_size(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	uint intr_val = 0;
-+
-+	sbsocramregs_t *regs;
-+	bool wasup;
-+	uint corerev;
-+	uint32 coreinfo;
-+	uint memsize = 0;
-+
-+	si = SB_INFO(sbh);
-+	ASSERT(si);
-+
-+	/* Block ints and save current core */
-+	INTR_OFF(si, intr_val);
-+	origidx = sb_coreidx(sbh);
-+
-+	/* Switch to SOCRAM core */
-+	if (!(regs = sb_setcore(sbh, SB_SOCRAM, 0)))
-+		goto done;
-+
-+	/* Get info for determining size */
-+	if (!(wasup = sb_iscoreup(sbh)))
-+		sb_core_reset(sbh, 0, 0);
-+	corerev = sb_corerev(sbh);
-+	coreinfo = R_REG(si->osh, &regs->coreinfo);
-+
-+	/* Calculate size from coreinfo based on rev */
-+	switch (corerev) {
-+	case 0:
-+		memsize = 1 << (16 + (coreinfo & SRCI_MS0_MASK));
-+		break;
-+	default: /* rev >= 1 */
-+		memsize = 1 << (SR_BSZ_BASE + (coreinfo & SRCI_SRBSZ_MASK));
-+		memsize *= (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
-+		break;
-+	}
-+
-+	/* Return to previous state and core */
-+	if (!wasup)
-+		sb_core_disable(sbh, 0);
-+	sb_setcoreidx(sbh, origidx);
-+
-+done:
-+	INTR_RESTORE(si, intr_val);
-+	return memsize;
-+}
-+
-+
-diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setup.c
---- linux.old/arch/mips/bcm947xx/setup.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/setup.c	2006-04-27 23:22:53.000000000 +0200
-@@ -0,0 +1,241 @@
-+/*
-+ *  Generic setup routines for Broadcom MIPS boards
-+ *
-+ *  Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/serialP.h>
-+#include <linux/ide.h>
-+#include <asm/bootinfo.h>
-+#include <asm/cpu.h>
-+#include <asm/time.h>
-+#include <asm/reboot.h>
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <sbutils.h>
-+#include <bcmutils.h>
-+#include <bcmnvram.h>
-+#include <sbhndmips.h>
-+#include <hndmips.h>
-+#include <trxhdr.h>
-+
-+/* Virtual IRQ base, after last hw IRQ */
-+#define SBMIPS_VIRTIRQ_BASE 6
-+
-+/* # IRQs, hw and sw IRQs */
-+#define SBMIPS_NUMIRQS  8
-+
-+/* Global SB handle */
-+sb_t *bcm947xx_sbh = NULL;
-+spinlock_t bcm947xx_sbh_lock = SPIN_LOCK_UNLOCKED;
-+
-+/* Convenience */
-+#define sbh bcm947xx_sbh
-+#define sbh_lock bcm947xx_sbh_lock
-+
-+extern void bcm947xx_time_init(void);
-+extern void bcm947xx_timer_setup(struct irqaction *irq);
-+
-+#ifdef CONFIG_REMOTE_DEBUG
-+extern void set_debug_traps(void);
-+extern void rs_kgdb_hook(struct serial_state *);
-+extern void breakpoint(void);
-+#endif
-+
-+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-+extern struct ide_ops std_ide_ops;
-+#endif
-+
-+/* Kernel command line */
-+char arcs_cmdline[CL_SIZE] __initdata = CONFIG_CMDLINE;
-+extern void sb_serial_init(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift));
-+
-+void
-+bcm947xx_machine_restart(char *command)
-+{
-+	printk("Please stand by while rebooting the system...\n");
-+
-+	/* Set the watchdog timer to reset immediately */
-+	__cli();
-+	sb_watchdog(sbh, 1);
-+	while (1);
-+}
-+
-+void
-+bcm947xx_machine_halt(void)
-+{
-+	printk("System halted\n");
-+
-+	/* Disable interrupts and watchdog and spin forever */
-+	__cli();
-+	sb_watchdog(sbh, 0);
-+	while (1);
-+}
-+
-+#ifdef CONFIG_SERIAL
-+
-+static int ser_line = 0;
-+
-+typedef struct {
-+        void *regs;
-+        uint irq;
-+        uint baud_base;
-+        uint reg_shift;
-+} serial_port;
-+
-+static serial_port ports[4];
-+static int num_ports = 0;
-+
-+static void
-+serial_add(void *regs, uint irq, uint baud_base, uint reg_shift)
-+{
-+        ports[num_ports].regs = regs;
-+        ports[num_ports].irq = irq;
-+        ports[num_ports].baud_base = baud_base;
-+        ports[num_ports].reg_shift = reg_shift;
-+        num_ports++;
-+}
-+
-+static void
-+do_serial_add(serial_port *port)
-+{
-+        void *regs;
-+        uint irq;
-+        uint baud_base;
-+        uint reg_shift;
-+        struct serial_struct s;
-+        
-+        regs = port->regs;
-+        irq = port->irq;
-+        baud_base = port->baud_base;
-+        reg_shift = port->reg_shift;
-+
-+        memset(&s, 0, sizeof(s));
-+
-+        s.line = ser_line++;
-+        s.iomem_base = regs;
-+        s.irq = irq + 2;
-+        s.baud_base = baud_base / 16;
-+        s.flags = ASYNC_BOOT_AUTOCONF;
-+        s.io_type = SERIAL_IO_MEM;
-+        s.iomem_reg_shift = reg_shift;
-+
-+        if (early_serial_setup(&s) != 0) {
-+                printk(KERN_ERR "Serial setup failed!\n");
-+        }
-+}
-+
-+#endif /* CONFIG_SERIAL */
-+
-+void __init
-+brcm_setup(void)
-+{
-+	char *s;
-+	int i;
-+	char *value;
-+
-+	/* Get global SB handle */
-+	sbh = sb_kattach();
-+
-+	/* Initialize clocks and interrupts */
-+	sb_mips_init(sbh, SBMIPS_VIRTIRQ_BASE);
-+
-+	if (BCM330X(current_cpu_data.processor_id) &&
-+		(read_c0_diag() & BRCM_PFC_AVAIL)) {
-+		/* 
-+		 * Now that the sbh is inited set the  proper PFC value 
-+		 */	
-+		printk("Setting the PFC to its default value\n");
-+		enable_pfc(PFC_AUTO);
-+	}
-+
-+
-+#ifdef CONFIG_SERIAL
-+	sb_serial_init(sbh, serial_add);
-+
-+	/* reverse serial ports if nvram variable starts with console=ttyS1 */
-+	/* Initialize UARTs */
-+	s = nvram_get("kernel_args");
-+	if (!s) s = "";
-+	if (!strncmp(s, "console=ttyS1", 13)) {
-+		for (i = num_ports; i; i--)
-+			do_serial_add(&ports[i - 1]);
-+	} else {
-+		for (i = 0; i < num_ports; i++)
-+			do_serial_add(&ports[i]);
-+	}
-+#endif
-+
-+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-+	ide_ops = &std_ide_ops;
-+#endif
-+
-+	/* Override default command line arguments */
-+	value = nvram_get("kernel_cmdline");
-+	if (value && strlen(value) && strncmp(value, "empty", 5))
-+		strncpy(arcs_cmdline, value, sizeof(arcs_cmdline));
-+
-+
-+	/* Generic setup */
-+	_machine_restart = bcm947xx_machine_restart;
-+	_machine_halt = bcm947xx_machine_halt;
-+	_machine_power_off = bcm947xx_machine_halt;
-+
-+	board_time_init = bcm947xx_time_init;
-+	board_timer_setup = bcm947xx_timer_setup;
-+}
-+
-+const char *
-+get_system_type(void)
-+{
-+	static char s[32];
-+
-+	if (bcm947xx_sbh) {
-+		sprintf(s, "Broadcom BCM%X chip rev %d", sb_chip(bcm947xx_sbh),
-+			sb_chiprev(bcm947xx_sbh));
-+		return s;
-+	}
-+	else
-+		return "Broadcom BCM947XX";
-+}
-+
-+void __init
-+bus_error_init(void)
-+{
-+}
-+
-diff -urN linux.old/arch/mips/bcm947xx/sflash.c linux.dev/arch/mips/bcm947xx/sflash.c
---- linux.old/arch/mips/bcm947xx/sflash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/sflash.c	2006-04-27 22:11:27.000000000 +0200
-@@ -0,0 +1,422 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sflash.c,v 1.1.1.13 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#include <osl.h>
-+#include <typedefs.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <mipsinc.h>
-+#include <bcmutils.h>
-+#include <bcmdevs.h>
-+#include <sflash.h>
-+
-+/* Private global state */
-+static struct sflash sflash;
-+
-+/* Issue a serial flash command */
-+static INLINE void
-+sflash_cmd(chipcregs_t *cc, uint opcode)
-+{
-+	W_REG(NULL, &cc->flashcontrol, SFLASH_START | opcode);
-+	while (R_REG(NULL, &cc->flashcontrol) & SFLASH_BUSY);
-+}
-+
-+/* Initialize serial flash access */
-+struct sflash *
-+sflash_init(chipcregs_t *cc)
-+{
-+	uint32 id, id2;
-+
-+	bzero(&sflash, sizeof(sflash));
-+
-+	sflash.type = R_REG(NULL, &cc->capabilities) & CAP_FLASH_MASK;
-+
-+	switch (sflash.type) {
-+	case SFLASH_ST:
-+		/* Probe for ST chips */
-+		sflash_cmd(cc, SFLASH_ST_DP);
-+		sflash_cmd(cc, SFLASH_ST_RES);
-+		id = R_REG(NULL, &cc->flashdata);
-+		switch (id) {
-+		case 0x11:
-+			/* ST M25P20 2 Mbit Serial Flash */
-+			sflash.blocksize = 64 * 1024;
-+			sflash.numblocks = 4;
-+			break;
-+		case 0x12:
-+			/* ST M25P40 4 Mbit Serial Flash */
-+			sflash.blocksize = 64 * 1024;
-+			sflash.numblocks = 8;
-+			break;
-+		case 0x13:
-+			/* ST M25P80 8 Mbit Serial Flash */
-+			sflash.blocksize = 64 * 1024;
-+			sflash.numblocks = 16;
-+			break;
-+		case 0x14:
-+			/* ST M25P16 16 Mbit Serial Flash */
-+			sflash.blocksize = 64 * 1024;
-+			sflash.numblocks = 32;
-+			break;
-+		case 0x15:
-+			/* ST M25P32 32 Mbit Serial Flash */
-+			sflash.blocksize = 64 * 1024;
-+			sflash.numblocks = 64;
-+			break;
-+		case 0x16:
-+			/* ST M25P64 64 Mbit Serial Flash */
-+			sflash.blocksize = 64 * 1024;
-+			sflash.numblocks = 128;
-+			break;
-+		case 0xbf:
-+			W_REG(NULL, &cc->flashaddress, 1);
-+			sflash_cmd(cc, SFLASH_ST_RES);
-+			id2 = R_REG(NULL, &cc->flashdata);
-+			if (id2 == 0x44) {
-+				/* SST M25VF80 4 Mbit Serial Flash */
-+				sflash.blocksize = 64 * 1024;
-+				sflash.numblocks = 8;
-+			}
-+			break;
-+		}
-+		break;
-+
-+	case SFLASH_AT:
-+		/* Probe for Atmel chips */
-+		sflash_cmd(cc, SFLASH_AT_STATUS);
-+		id = R_REG(NULL, &cc->flashdata) & 0x3c;
-+		switch (id) {
-+		case 0xc:
-+			/* Atmel AT45DB011 1Mbit Serial Flash */
-+			sflash.blocksize = 256;
-+			sflash.numblocks = 512;
-+			break;
-+		case 0x14:
-+			/* Atmel AT45DB021 2Mbit Serial Flash */
-+			sflash.blocksize = 256;
-+			sflash.numblocks = 1024;
-+			break;
-+		case 0x1c:
-+			/* Atmel AT45DB041 4Mbit Serial Flash */
-+			sflash.blocksize = 256;
-+			sflash.numblocks = 2048;
-+			break;
-+		case 0x24:
-+			/* Atmel AT45DB081 8Mbit Serial Flash */
-+			sflash.blocksize = 256;
-+			sflash.numblocks = 4096;
-+			break;
-+		case 0x2c:
-+			/* Atmel AT45DB161 16Mbit Serial Flash */
-+			sflash.blocksize = 512;
-+			sflash.numblocks = 4096;
-+			break;
-+		case 0x34:
-+			/* Atmel AT45DB321 32Mbit Serial Flash */
-+			sflash.blocksize = 512;
-+			sflash.numblocks = 8192;
-+			break;
-+		case 0x3c:
-+			/* Atmel AT45DB642 64Mbit Serial Flash */
-+			sflash.blocksize = 1024;
-+			sflash.numblocks = 8192;
-+			break;
-+		}
-+		break;
-+	}
-+
-+	sflash.size = sflash.blocksize * sflash.numblocks;
-+	return sflash.size ? &sflash : NULL;
-+}
-+
-+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
-+int
-+sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf)
-+{
-+	int cnt;
-+	uint32 *from, *to;
-+
-+	if (!len)
-+		return 0;
-+
-+	if ((offset + len) > sflash.size)
-+		return -22;
-+
-+	if ((len >= 4) && (offset & 3))
-+		cnt = 4 - (offset & 3);
-+	else if ((len >= 4) && ((uint32)buf & 3))
-+		cnt = 4 - ((uint32)buf & 3);
-+	else
-+		cnt = len;
-+
-+	from = (uint32 *)KSEG1ADDR(SB_FLASH2 + offset);
-+	to = (uint32 *)buf;
-+
-+	if (cnt < 4) {
-+		bcopy(from, to, cnt);
-+		return cnt;
-+	}
-+
-+	while (cnt >= 4) {
-+		*to++ = *from++;
-+		cnt -= 4;
-+	}
-+
-+	return (len - cnt);
-+}
-+
-+/* Poll for command completion. Returns zero when complete. */
-+int
-+sflash_poll(chipcregs_t *cc, uint offset)
-+{
-+	if (offset >= sflash.size)
-+		return -22;
-+
-+	switch (sflash.type) {
-+	case SFLASH_ST:
-+		/* Check for ST Write In Progress bit */
-+		sflash_cmd(cc, SFLASH_ST_RDSR);
-+		return R_REG(NULL, &cc->flashdata) & SFLASH_ST_WIP;
-+	case SFLASH_AT:
-+		/* Check for Atmel Ready bit */
-+		sflash_cmd(cc, SFLASH_AT_STATUS);
-+		return !(R_REG(NULL, &cc->flashdata) & SFLASH_AT_READY);
-+	}
-+
-+	return 0;
-+}
-+
-+/* Write len bytes starting at offset into buf. Returns number of bytes
-+ * written. Caller should poll for completion.
-+ */
-+int
-+sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf)
-+{
-+	struct sflash *sfl;
-+	int ret = 0;
-+	bool is4712b0;
-+	uint32 page, byte, mask;
-+
-+	if (!len)
-+		return 0;
-+
-+	if ((offset + len) > sflash.size)
-+		return -22;
-+
-+	sfl = &sflash;
-+	switch (sfl->type) {
-+	case SFLASH_ST:
-+		mask = R_REG(NULL, &cc->chipid);
-+		is4712b0 = (((mask & CID_ID_MASK) == BCM4712_CHIP_ID) &&
-+		            ((mask & CID_REV_MASK) == (3 << CID_REV_SHIFT)));
-+		/* Enable writes */
-+		sflash_cmd(cc, SFLASH_ST_WREN);
-+		if (is4712b0) {
-+			mask = 1 << 14;
-+			W_REG(NULL, &cc->flashaddress, offset);
-+			W_REG(NULL, &cc->flashdata, *buf++);
-+			/* Set chip select */
-+			OR_REG(NULL, &cc->gpioout, mask);
-+			/* Issue a page program with the first byte */
-+			sflash_cmd(cc, SFLASH_ST_PP);
-+			ret = 1;
-+			offset++;
-+			len--;
-+			while (len > 0) {
-+				if ((offset & 255) == 0) {
-+					/* Page boundary, drop cs and return */
-+					AND_REG(NULL, &cc->gpioout, ~mask);
-+					if (!sflash_poll(cc, offset)) {
-+						/* Flash rejected command */
-+						return -11;
-+					}
-+					return ret;
-+				} else {
-+					/* Write single byte */
-+					sflash_cmd(cc, *buf++);
-+				}
-+				ret++;
-+				offset++;
-+				len--;
-+			}
-+			/* All done, drop cs if needed */
-+			if ((offset & 255) != 1) {
-+				/* Drop cs */
-+				AND_REG(NULL, &cc->gpioout, ~mask);
-+				if (!sflash_poll(cc, offset)) {
-+					/* Flash rejected command */
-+					return -12;
-+				}
-+			}
-+		} else {
-+			ret = 1;
-+			W_REG(NULL, &cc->flashaddress, offset);
-+			W_REG(NULL, &cc->flashdata, *buf);
-+			/* Page program */
-+			sflash_cmd(cc, SFLASH_ST_PP);
-+		}
-+		break;
-+	case SFLASH_AT:
-+		mask = sfl->blocksize - 1;
-+		page = (offset & ~mask) << 1;
-+		byte = offset & mask;
-+		/* Read main memory page into buffer 1 */
-+		if (byte || (len < sfl->blocksize)) {
-+			W_REG(NULL, &cc->flashaddress, page);
-+			sflash_cmd(cc, SFLASH_AT_BUF1_LOAD);
-+			/* 250 us for AT45DB321B */
-+			SPINWAIT(sflash_poll(cc, offset), 1000);
-+			ASSERT(!sflash_poll(cc, offset));
-+		}
-+		/* Write into buffer 1 */
-+		for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
-+			W_REG(NULL, &cc->flashaddress, byte++);
-+			W_REG(NULL, &cc->flashdata, *buf++);
-+			sflash_cmd(cc, SFLASH_AT_BUF1_WRITE);
-+		}
-+		/* Write buffer 1 into main memory page */
-+		W_REG(NULL, &cc->flashaddress, page);
-+		sflash_cmd(cc, SFLASH_AT_BUF1_PROGRAM);
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+/* Erase a region. Returns number of bytes scheduled for erasure.
-+ * Caller should poll for completion.
-+ */
-+int
-+sflash_erase(chipcregs_t *cc, uint offset)
-+{
-+	struct sflash *sfl;
-+
-+	if (offset >= sflash.size)
-+		return -22;
-+
-+	sfl = &sflash;
-+	switch (sfl->type) {
-+	case SFLASH_ST:
-+		sflash_cmd(cc, SFLASH_ST_WREN);
-+		W_REG(NULL, &cc->flashaddress, offset);
-+		sflash_cmd(cc, SFLASH_ST_SE);
-+		return sfl->blocksize;
-+	case SFLASH_AT:
-+		W_REG(NULL, &cc->flashaddress, offset << 1);
-+		sflash_cmd(cc, SFLASH_AT_PAGE_ERASE);
-+		return sfl->blocksize;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * writes the appropriate range of flash, a NULL buf simply erases
-+ * the region of flash
-+ */
-+int
-+sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf)
-+{
-+	struct sflash *sfl;
-+	uchar *block = NULL, *cur_ptr, *blk_ptr;
-+	uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
-+	uint blk_offset, blk_len, copied;
-+	int bytes, ret = 0;
-+
-+	/* Check address range */
-+	if (len <= 0)
-+		return 0;
-+
-+	sfl = &sflash;
-+	if ((offset + len) > sfl->size)
-+		return -1;
-+
-+	blocksize = sfl->blocksize;
-+	mask = blocksize - 1;
-+
-+	/* Allocate a block of mem */
-+	if (!(block = MALLOC(NULL, blocksize)))
-+		return -1;
-+
-+	while (len) {
-+		/* Align offset */
-+		cur_offset = offset & ~mask;
-+		cur_length = blocksize;
-+		cur_ptr = block;
-+
-+		remainder = blocksize - (offset & mask);
-+		if (len < remainder)
-+			cur_retlen = len;
-+		else
-+			cur_retlen = remainder;
-+
-+		/* buf == NULL means erase only */
-+		if (buf) {
-+			/* Copy existing data into holding block if necessary */
-+			if ((offset & mask) || (len < blocksize)) {
-+				blk_offset = cur_offset;
-+				blk_len = cur_length;
-+				blk_ptr = cur_ptr;
-+
-+				/* Copy entire block */
-+				while (blk_len) {
-+					copied = sflash_read(cc, blk_offset, blk_len, blk_ptr);
-+					blk_offset += copied;
-+					blk_len -= copied;
-+					blk_ptr += copied;
-+				}
-+			}
-+
-+			/* Copy input data into holding block */
-+			memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
-+		}
-+
-+		/* Erase block */
-+		if ((ret = sflash_erase(cc, (uint) cur_offset)) < 0)
-+			goto done;
-+		while (sflash_poll(cc, (uint) cur_offset));
-+
-+		/* buf == NULL means erase only */
-+		if (!buf) {
-+			offset += cur_retlen;
-+			len -= cur_retlen;
-+			continue;
-+		}
-+
-+		/* Write holding block */
-+		while (cur_length > 0) {
-+			if ((bytes = sflash_write(cc,
-+			                          (uint) cur_offset,
-+			                          (uint) cur_length,
-+			                          (uchar *) cur_ptr)) < 0) {
-+				ret = bytes;
-+				goto done;
-+			}
-+			while (sflash_poll(cc, (uint) cur_offset));
-+			cur_offset += bytes;
-+			cur_length -= bytes;
-+			cur_ptr += bytes;
-+		}
-+
-+		offset += cur_retlen;
-+		len -= cur_retlen;
-+		buf += cur_retlen;
-+	}
-+
-+	ret = len;
-+done:
-+	if (block)
-+		MFREE(NULL, block, blocksize);
-+	return ret;
-+}
-diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.c
---- linux.old/arch/mips/bcm947xx/time.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/time.c	2006-04-28 00:45:40.000000000 +0200
-@@ -0,0 +1,104 @@
-+/*
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: time.c,v 1.1.1.10 2006/02/27 03:42:55 honor Exp $
-+ */
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/serial_reg.h>
-+#include <linux/interrupt.h>
-+#include <asm/addrspace.h>
-+#include <asm/io.h>
-+#include <asm/time.h>
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmnvram.h>
-+#include <sbconfig.h>
-+#include <sbextif.h>
-+#include <sbutils.h>
-+#include <hndmips.h>
-+#include <mipsinc.h>
-+#include <hndcpu.h>
-+
-+/* Global SB handle */
-+extern void *bcm947xx_sbh;
-+extern spinlock_t bcm947xx_sbh_lock;
-+
-+/* Convenience */
-+#define sbh bcm947xx_sbh
-+#define sbh_lock bcm947xx_sbh_lock
-+
-+extern int panic_timeout;
-+static int watchdog = 0;
-+static u8 *mcr = NULL;
-+
-+void __init
-+bcm947xx_time_init(void)
-+{
-+	unsigned int hz;
-+	extifregs_t *eir;
-+
-+	/*
-+	 * Use deterministic values for initial counter interrupt
-+	 * so that calibrate delay avoids encountering a counter wrap.
-+	 */
-+	write_c0_count(0);
-+	write_c0_compare(0xffff);
-+
-+	if (!(hz = sb_cpu_clock(sbh)))
-+		hz = 100000000;
-+
-+	printk("CPU: BCM%04x rev %d at %d MHz\n", sb_chip(sbh), sb_chiprev(sbh),
-+	       (hz + 500000) / 1000000);
-+
-+	/* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
-+	mips_hpt_frequency = hz / 2;
-+
-+	/* Set watchdog interval in ms */
-+	watchdog = simple_strtoul(nvram_safe_get("watchdog"), NULL, 0);
-+
-+	/* Please set the watchdog to 3 sec if it is less than 3 but not equal to 0 */
-+	if (watchdog > 0) {
-+		if (watchdog < 3000)
-+			watchdog = 3000;
-+	}
-+
-+	/* Set panic timeout in seconds */
-+	panic_timeout = watchdog / 1000;
-+}
-+
-+static void
-+bcm947xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	/* Generic MIPS timer code */
-+	timer_interrupt(irq, dev_id, regs);
-+
-+	/* Set the watchdog timer to reset after the specified number of ms */
-+	if (watchdog > 0)
-+		sb_watchdog(sbh, WATCHDOG_CLOCK / 1000 * watchdog);
-+}
-+
-+static struct irqaction bcm947xx_timer_irqaction = {
-+	bcm947xx_timer_interrupt,
-+	SA_INTERRUPT,
-+	0,
-+	"timer",
-+	NULL,
-+	NULL
-+};
-+
-+void __init
-+bcm947xx_timer_setup(struct irqaction *irq)
-+{
-+	/* Enable the timer interrupt */
-+	setup_irq(7, &bcm947xx_timer_irqaction);
-+}
-diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in
---- linux.old/arch/mips/config-shared.in	2006-04-27 18:04:37.000000000 +0200
-+++ linux.dev/arch/mips/config-shared.in	2006-04-27 19:24:19.000000000 +0200
-@@ -208,6 +208,14 @@
-    fi
-    define_bool CONFIG_MIPS_RTC y
- fi
-+dep_bool 'Support for Broadcom MIPS-based boards' CONFIG_MIPS_BRCM $CONFIG_EXPERIMENTAL
-+dep_bool 'Support for Broadcom BCM947XX' CONFIG_BCM947XX $CONFIG_MIPS_BRCM
-+if [ "$CONFIG_BCM947XX" = "y" ] ; then
-+   bool '    Support for Broadcom BCM4710' CONFIG_BCM4710
-+   bool '    Support for Broadcom BCM4310' CONFIG_BCM4310
-+   bool '    Support for Broadcom BCM4704' CONFIG_BCM4704
-+   bool '    Support for Broadcom BCM5365' CONFIG_BCM5365
-+fi
- bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI
- bool 'Support for TANBAC TB0226 (Mbase)' CONFIG_TANBAC_TB0226
- bool 'Support for TANBAC TB0229 (VR4131DIMM)' CONFIG_TANBAC_TB0229
-@@ -229,6 +237,11 @@
- define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
- 
- #
-+# Provide an option for a default kernel command line
-+#
-+string 'Default kernel command string' CONFIG_CMDLINE ""
-+
-+#
- # Select some configuration options automatically based on user selections.
- #
- if [ "$CONFIG_ACER_PICA_61" = "y" ]; then
-@@ -554,6 +567,13 @@
-    define_bool CONFIG_SWAP_IO_SPACE_L y
-    define_bool CONFIG_BOOT_ELF32 y
- fi
-+if [ "$CONFIG_BCM947XX" = "y" ] ; then
-+   define_bool CONFIG_PCI y
-+   define_bool CONFIG_NONCOHERENT_IO y
-+   define_bool CONFIG_NEW_TIME_C y
-+   define_bool CONFIG_NEW_IRQ y
-+   define_bool CONFIG_HND y
-+fi
- if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then
-    define_bool CONFIG_ARC32 y
-    define_bool CONFIG_ARC_MEMORY y
-@@ -1042,7 +1062,11 @@
- 
- bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
- bool 'Enable run-time debugging' CONFIG_RUNTIME_DEBUG
--bool 'Remote GDB kernel debugging' CONFIG_KGDB
-+if [ "$CONFIG_BCM947XX" = "y" ] ; then
-+	bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
-+else 
-+	bool 'Remote GDB kernel debugging' CONFIG_KGDB
-+fi
- dep_bool '  Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_KGDB
- if [ "$CONFIG_KGDB" = "y" ]; then
-    define_bool CONFIG_DEBUG_INFO y
-diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c
---- linux.old/arch/mips/kernel/cpu-probe.c	2006-04-27 18:04:37.000000000 +0200
-+++ linux.dev/arch/mips/kernel/cpu-probe.c	2006-04-27 19:24:19.000000000 +0200
-@@ -162,7 +162,7 @@
- 
- static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
- {
--	switch (c->processor_id & 0xff00) {
-+	switch (c->processor_id & PRID_IMP_MASK) {
- 	case PRID_IMP_R2000:
- 		c->cputype = CPU_R2000;
- 		c->isa_level = MIPS_CPU_ISA_I;
-@@ -172,7 +172,7 @@
- 		c->tlbsize = 64;
- 		break;
- 	case PRID_IMP_R3000:
--		if ((c->processor_id & 0xff) == PRID_REV_R3000A)
-+		if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A)
- 			if (cpu_has_confreg())
- 				c->cputype = CPU_R3081E;
- 			else
-@@ -187,12 +187,12 @@
- 		break;
- 	case PRID_IMP_R4000:
- 		if (read_c0_config() & CONF_SC) {
--			if ((c->processor_id & 0xff) >= PRID_REV_R4400)
-+			if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400)
- 				c->cputype = CPU_R4400PC;
- 			else
- 				c->cputype = CPU_R4000PC;
- 		} else {
--			if ((c->processor_id & 0xff) >= PRID_REV_R4400)
-+			if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400)
- 				c->cputype = CPU_R4400SC;
- 			else
- 				c->cputype = CPU_R4000SC;
-@@ -438,7 +438,7 @@
- static inline void cpu_probe_mips(struct cpuinfo_mips *c)
- {
- 	decode_config1(c);
--	switch (c->processor_id & 0xff00) {
-+	switch (c->processor_id & PRID_IMP_MASK) {
- 	case PRID_IMP_4KC:
- 		c->cputype = CPU_4KC;
- 		c->isa_level = MIPS_CPU_ISA_M32;
-@@ -479,10 +479,10 @@
- {
- 	decode_config1(c);
- 	c->options |= MIPS_CPU_PREFETCH;
--	switch (c->processor_id & 0xff00) {
-+	switch (c->processor_id & PRID_IMP_MASK) {
- 	case PRID_IMP_AU1_REV1:
- 	case PRID_IMP_AU1_REV2:
--		switch ((c->processor_id >> 24) & 0xff) {
-+		switch ((c->processor_id >> 24) & PRID_REV_MASK) {
- 		case 0:
-  			c->cputype = CPU_AU1000;
- 			break;
-@@ -510,10 +510,34 @@
- 	}
- }
- 
-+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
-+{
-+	decode_config1(c);
-+	c->options |= MIPS_CPU_PREFETCH;
-+	switch (c->processor_id & PRID_IMP_MASK) {
-+	case PRID_IMP_BCM4710:
-+			c->cputype = CPU_BCM4710;
-+			c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | 
-+								MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
-+			c->scache.flags = MIPS_CACHE_NOT_PRESENT;
-+			break;
-+	case PRID_IMP_4KC:              
-+	case PRID_IMP_BCM3302:          
-+			c->cputype = CPU_BCM3302;
-+			c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | 
-+								MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
-+			c->scache.flags = MIPS_CACHE_NOT_PRESENT;
-+			break;
-+	default:
-+			c->cputype = CPU_UNKNOWN;
-+			break;
-+	}
-+}
-+
- static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
- {
- 	decode_config1(c);
--	switch (c->processor_id & 0xff00) {
-+	switch (c->processor_id & PRID_IMP_MASK) {
- 	case PRID_IMP_SB1:
- 		c->cputype = CPU_SB1;
- 		c->isa_level = MIPS_CPU_ISA_M64;
-@@ -535,7 +559,7 @@
- static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
- {
- 	decode_config1(c);
--	switch (c->processor_id & 0xff00) {
-+	switch (c->processor_id & PRID_IMP_MASK) {
- 	case PRID_IMP_SR71000:
- 		c->cputype = CPU_SR71000;
- 		c->isa_level = MIPS_CPU_ISA_M64;
-@@ -560,7 +584,7 @@
- 	c->cputype	= CPU_UNKNOWN;
- 
- 	c->processor_id = read_c0_prid();
--	switch (c->processor_id & 0xff0000) {
-+	switch (c->processor_id & PRID_COMP_MASK) {
- 
- 	case PRID_COMP_LEGACY:
- 		cpu_probe_legacy(c);
-@@ -571,6 +595,9 @@
- 	case PRID_COMP_ALCHEMY:
- 		cpu_probe_alchemy(c);
- 		break;
-+	case PRID_COMP_BROADCOM:
-+		cpu_probe_broadcom(c);
-+		break;
- 	case PRID_COMP_SIBYTE:
- 		cpu_probe_sibyte(c);
- 		break;
-diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
---- linux.old/arch/mips/kernel/head.S	2006-04-27 18:04:37.000000000 +0200
-+++ linux.dev/arch/mips/kernel/head.S	2006-04-27 19:24:19.000000000 +0200
-@@ -28,12 +28,20 @@
- #include <asm/mipsregs.h>
- #include <asm/stackframe.h>
- 
-+#ifdef CONFIG_BCM4710
-+#undef eret
-+#define eret nop; nop; eret
-+#endif
-+
- 		.text
-+		j       kernel_entry
-+		nop
-+
- 		/*
- 		 * Reserved space for exception handlers.
- 		 * Necessary for machines which link their kernels at KSEG0.
- 		 */
--		.fill	0x400
-+		.fill	0x3f4
- 
- 		/* The following two symbols are used for kernel profiling. */
- 		EXPORT(stext)
-diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c
---- linux.old/arch/mips/kernel/proc.c	2006-04-27 18:04:37.000000000 +0200
-+++ linux.dev/arch/mips/kernel/proc.c	2006-04-27 19:24:19.000000000 +0200
-@@ -78,9 +78,10 @@
- 	[CPU_AU1550]	"Au1550",
- 	[CPU_24K]	"MIPS 24K",
- 	[CPU_AU1200]	"Au1200",
-+	[CPU_BCM4710]   "BCM4710",
-+	[CPU_BCM3302]   "BCM3302",
- };
- 
--
- static int show_cpuinfo(struct seq_file *m, void *v)
- {
- 	unsigned int version = current_cpu_data.processor_id;
-diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c
---- linux.old/arch/mips/kernel/setup.c	2006-04-27 18:04:37.000000000 +0200
-+++ linux.dev/arch/mips/kernel/setup.c	2006-04-27 19:24:19.000000000 +0200
-@@ -493,6 +493,7 @@
- 	void swarm_setup(void);
- 	void hp_setup(void);
- 	void au1x00_setup(void);
-+	void brcm_setup(void);
- 	void frame_info_init(void);
- 
- 	frame_info_init();
-@@ -691,6 +692,11 @@
-                 pmc_yosemite_setup();
-                 break;
- #endif
-+#if defined(CONFIG_BCM4710) || defined(CONFIG_BCM4310)
-+	case MACH_GROUP_BRCM:
-+			brcm_setup();
-+			break;
-+#endif	
- 	default:
- 		panic("Unsupported architecture");
- 	}
-diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c
---- linux.old/arch/mips/kernel/traps.c	2006-04-27 18:04:37.000000000 +0200
-+++ linux.dev/arch/mips/kernel/traps.c	2006-04-27 19:24:19.000000000 +0200
-@@ -920,6 +920,7 @@
- void __init trap_init(void)
- {
- 	extern char except_vec1_generic;
-+	extern char except_vec2_generic;
- 	extern char except_vec3_generic, except_vec3_r4000;
- 	extern char except_vec_ejtag_debug;
- 	extern char except_vec4;
-@@ -927,6 +928,7 @@
- 
- 	/* Copy the generic exception handler code to it's final destination. */
- 	memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
-+	memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80);
- 
- 	/*
- 	 * Setup default vectors
-@@ -985,6 +987,12 @@
- 	set_except_vector(13, handle_tr);
- 	set_except_vector(22, handle_mdmx);
- 
-+	if (current_cpu_data.cputype == CPU_SB1) {
-+		/* Enable timer interrupt and scd mapped interrupt */
-+		clear_c0_status(0xf000);
-+		set_c0_status(0xc00);
-+	}
-+
- 	if (cpu_has_fpu && !cpu_has_nofpuex)
- 		set_except_vector(15, handle_fpe);
- 
-diff -urN linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c
---- linux.old/arch/mips/mm/c-r4k.c	2006-04-27 18:04:37.000000000 +0200
-+++ linux.dev/arch/mips/mm/c-r4k.c	2006-04-27 19:24:19.000000000 +0200
-@@ -1166,3 +1166,47 @@
- 	build_clear_page();
- 	build_copy_page();
- }
-+
-+#ifdef CONFIG_BCM4704
-+static void __init mips32_icache_fill(unsigned long addr, uint nbytes)
-+{
-+	unsigned long ic_lsize = current_cpu_data.icache.linesz;
-+	int i;
-+	for (i = 0; i < nbytes; i += ic_lsize)
-+		fill_icache_line((addr + i));
-+}
-+
-+/*
-+ *  This must be run from the cache on 4704A0
-+ *  so there are no mips core BIU ops in progress
-+ *  when the PFC is enabled.
-+ */
-+#define PFC_CR0         0xff400000      /* control reg 0 */
-+#define PFC_CR1         0xff400004      /* control reg 1 */
-+static void __init enable_pfc(u32 mode)
-+{
-+	/* write range */
-+	*(volatile u32 *)PFC_CR1 = 0xffff0000;
-+
-+	/* enable */
-+	*(volatile u32 *)PFC_CR0 = mode;
-+}
-+#endif
-+
-+
-+void check_enable_mips_pfc(int val)
-+{
-+
-+#ifdef CONFIG_BCM4704
-+	struct cpuinfo_mips *c = &current_cpu_data;
-+
-+	/* enable prefetch cache */
-+	if (((c->processor_id & (PRID_COMP_MASK | PRID_IMP_MASK)) == PRID_IMP_BCM3302) 
-+		&& (read_c0_diag() & (1 << 29))) {
-+			mips32_icache_fill((unsigned long) &enable_pfc, 64);
-+			enable_pfc(val);
-+	}
-+#endif
-+}
-+
-+
-diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile
---- linux.old/arch/mips/pci/Makefile	2006-04-27 18:04:37.000000000 +0200
-+++ linux.dev/arch/mips/pci/Makefile	2006-04-27 19:24:19.000000000 +0200
-@@ -13,7 +13,9 @@
- obj-$(CONFIG_MIPS_MSC)		+= ops-msc.o
- obj-$(CONFIG_MIPS_NILE4)	+= ops-nile4.o
- obj-$(CONFIG_SNI_RM200_PCI)	+= ops-sni.o
-+ifndef CONFIG_BCM947XX
- obj-y				+= pci.o
-+endif
- obj-$(CONFIG_PCI_AUTO)		+= pci_auto.o
- 
- include $(TOPDIR)/Rules.make
-diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c
---- linux.old/drivers/char/serial.c	2006-04-27 18:04:37.000000000 +0200
-+++ linux.dev/drivers/char/serial.c	2006-04-27 19:24:19.000000000 +0200
-@@ -444,6 +444,10 @@
- 		return inb(info->port+1);
- #endif
- 	case SERIAL_IO_MEM:
-+#ifdef CONFIG_BCM4310
-+		readb((unsigned long) info->iomem_base +
-+				(UART_SCR<<info->iomem_reg_shift));
-+#endif
- 		return readb((unsigned long) info->iomem_base +
- 			     (offset<<info->iomem_reg_shift));
- 	default:
-@@ -464,6 +468,9 @@
- 	case SERIAL_IO_MEM:
- 		writeb(value, (unsigned long) info->iomem_base +
- 			      (offset<<info->iomem_reg_shift));
-+#ifdef CONFIG_BCM4704
-+		*((volatile unsigned int *) KSEG1ADDR(0x18000000));
-+#endif
- 		break;
- 	default:
- 		outb(value, info->port+offset);
-@@ -1728,7 +1735,7 @@
- 			/* Special case since 134 is really 134.5 */
- 			quot = (2*baud_base / 269);
- 		else if (baud)
--			quot = baud_base / baud;
-+			quot = (baud_base + (baud / 2)) / baud;
- 	}
- 	/* If the quotient is zero refuse the change */
- 	if (!quot && old_termios) {
-@@ -1745,12 +1752,12 @@
- 				/* Special case since 134 is really 134.5 */
- 				quot = (2*baud_base / 269);
- 			else if (baud)
--				quot = baud_base / baud;
-+				quot = (baud_base + (baud / 2)) / baud;
- 		}
- 	}
- 	/* As a last resort, if the quotient is zero, default to 9600 bps */
- 	if (!quot)
--		quot = baud_base / 9600;
-+		quot = (baud_base + 4800) / 9600;
- 	/*
- 	 * Work around a bug in the Oxford Semiconductor 952 rev B
- 	 * chip which causes it to seriously miscalculate baud rates
-@@ -5994,6 +6001,13 @@
- 	 *	Divisor, bytesize and parity
- 	 */
- 	state = rs_table + co->index;
-+	/*
-+ 	 * Safe guard: state structure must have been initialized
-+	 */
-+	if (state->iomem_base == NULL) {
-+		printk("!unable to setup serial console!\n");
-+		return -1;
-+	}
- 	if (doflow)
- 		state->flags |= ASYNC_CONS_FLOW;
- 	info = &async_sercons;
-@@ -6007,7 +6021,7 @@
- 	info->io_type = state->io_type;
- 	info->iomem_base = state->iomem_base;
- 	info->iomem_reg_shift = state->iomem_reg_shift;
--	quot = state->baud_base / baud;
-+	quot = (state->baud_base + (baud / 2)) / baud;
- 	cval = cflag & (CSIZE | CSTOPB);
- #if defined(__powerpc__) || defined(__alpha__)
- 	cval >>= 8;
-diff -urN linux.old/drivers/net/Config.in linux.dev/drivers/net/Config.in
---- linux.old/drivers/net/Config.in	2006-04-27 18:04:38.000000000 +0200
-+++ linux.dev/drivers/net/Config.in	2006-04-27 19:24:19.000000000 +0200
-@@ -2,6 +2,8 @@
- # Network device configuration
- #
- 
-+tristate 'Broadcom Home Network Division' CONFIG_HND $CONFIG_PCI
-+
- source drivers/net/arcnet/Config.in
- 
- tristate 'Dummy net driver support' CONFIG_DUMMY
-diff -urN linux.old/drivers/net/Makefile linux.dev/drivers/net/Makefile
---- linux.old/drivers/net/Makefile	2006-04-27 18:04:38.000000000 +0200
-+++ linux.dev/drivers/net/Makefile	2006-05-04 01:41:03.000000000 +0200
-@@ -3,6 +3,8 @@
- # Makefile for the Linux network (ethercard) device drivers.
- #
- 
-+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
-+
- obj-y           :=
- obj-m           :=
- obj-n           :=
-@@ -39,6 +41,7 @@
-   obj-$(CONFIG_ISDN) += slhc.o
- endif
- 
-+subdir-$(CONFIG_WL) += wl
- subdir-$(CONFIG_NET_PCMCIA) += pcmcia
- subdir-$(CONFIG_NET_WIRELESS) += wireless
- subdir-$(CONFIG_TULIP) += tulip
-diff -urN linux.old/drivers/net/wireless/Config.in linux.dev/drivers/net/wireless/Config.in
---- linux.old/drivers/net/wireless/Config.in	2006-04-27 18:04:38.000000000 +0200
-+++ linux.dev/drivers/net/wireless/Config.in	2006-05-04 01:42:48.000000000 +0200
-@@ -13,6 +13,7 @@
- fi
- 
- if [ "$CONFIG_PCI" = "y" ]; then
-+   dep_tristate '    Proprietary Broadcom BCM43xx 802.11 Wireless support' CONFIG_WL
-    dep_tristate '    Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)' CONFIG_PLX_HERMES $CONFIG_HERMES $CONFIG_EXPERIMENTAL
-    dep_tristate '    Hermes in TMD7160/NCP130 based PCI adaptor support (Pheecom WL-PCI etc.) (EXPERIMENTAL)' CONFIG_TMD_HERMES $CONFIG_HERMES $CONFIG_EXPERIMENTAL
-    dep_tristate '    Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)' CONFIG_PCI_HERMES $CONFIG_HERMES $CONFIG_EXPERIMENTAL
-diff -urN linux.old/drivers/net/wl/patchtable.pl linux.dev/drivers/net/wl/patchtable.pl
---- linux.old/drivers/net/wl/patchtable.pl	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/wl/patchtable.pl	2006-04-28 01:33:52.000000000 +0200
-@@ -0,0 +1,54 @@
-+#!/usr/bin/perl
-+use strict;
-+
-+my $TABLE = pack("V", 0xbadc0ded);
-+my $TABLE_SIZE = 512;
-+my $SLT1 = "\x01\x00\x00\x00";
-+my $SLT2 = "\x02\x00\x00\x00";
-+my $ACKW = "\x03\x00\x00\x00";
-+my $PTABLE_END = "\xff\xff\xff\xff";
-+
-+my $addr = "";
-+my $opcode = "";
-+my $function = "";
-+
-+sub add_entry {
-+	my $key = shift;
-+	my $value = shift;
-+	my $default = shift;
-+
-+	$TABLE .= $key;
-+	$TABLE .= pack("V", $value);
-+	$TABLE .= pack("V", $default);
-+}
-+
-+while (<>) {
-+	$addr = $opcode = "";
-+	/^\w{8}\s*<(.*)>:$/ and $function = $1;
-+	/^\s*(\w+):\s*(\w{8})\s*/ and do {
-+		$addr = $1;
-+		$opcode = $2;
-+	};
-+
-+	($function eq 'wlc_update_slot_timing') and do {
-+		# li	a2,9 	-- short slot time
-+		($opcode eq '24060009') and add_entry($SLT1, hex($addr), hex($opcode));
-+		# li	v0,519	-- 510 + short slot time
-+		($opcode eq '24020207') and add_entry($SLT2, hex($addr), hex($opcode));
-+		
-+		# li	a2,20	-- long slot time
-+		($opcode eq '24060014') and add_entry($SLT1, hex($addr), hex($opcode));
-+		# li	v0,530	-- 510 + long slot time
-+		($opcode eq '24020212') and add_entry($SLT2, hex($addr), hex($opcode));
-+	};
-+	($function eq 'wlc_d11hdrs') and do {
-+		# ori	s6,s6,0x1 -- ack flag (new)
-+		($opcode eq '36d60001') and add_entry($ACKW, hex($addr), hex($opcode));
-+		# ori	s3,s3,0x1 -- ack flag (old)
-+		($opcode eq '36730001') and add_entry($ACKW, hex($addr), hex($opcode));
-+	}
-+}
-+
-+$TABLE .= $PTABLE_END;
-+$TABLE .= ("\x00" x ($TABLE_SIZE - length($TABLE)));
-+print $TABLE;
-diff -urN linux.old/drivers/net/wl/Makefile linux.dev/drivers/net/wl/Makefile
---- linux.old/drivers/net/wl/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/wl/Makefile	2006-04-28 01:33:52.000000000 +0200
-@@ -0,0 +1,32 @@
-+#
-+# Makefile for the Broadcom wl driver
-+#
-+# Copyright 2004, Broadcom Corporation
-+# All Rights Reserved.
-+# 
-+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+#
-+# $Id: Makefile,v 1.2 2005/03/29 03:32:18 mbm Exp $
-+
-+EXTRA_CFLAGS += -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
-+
-+O_TARGET	:= wl_link.o
-+
-+obj-y		:= wl_mod.o
-+obj-y		+= bcmutils.o hnddma.o linux_osl.o
-+
-+obj-m		:= $(O_TARGET)
-+
-+wl_mod.o: wl_apsta.o
-+	sed -e 's,eth%d,wl%d\x00,g' < $< > $@
-+
-+wl.o: wl_link.o
-+	$(OBJDUMP) -d $< | perl patchtable.pl > patchtable.bin
-+	cat wl_link.o patchtable.bin > $@
-+
-+modules: wl.o
-+
-+include $(TOPDIR)/Rules.make
-diff -urN linux.old/drivers/net/wl/bcmip.h linux.dev/drivers/net/wl/bcmip.h
---- linux.old/drivers/net/wl/bcmip.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/wl/bcmip.h	2006-04-28 02:11:28.000000000 +0200
-@@ -0,0 +1,101 @@
-+/*
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * Fundamental constants relating to IP Protocol
-+ *
-+ * $Id: bcmip.h,v 1.1.1.3 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef _bcmip_h_
-+#define _bcmip_h_
-+
-+/* IPV4 and IPV6 common */
-+#define IP_VER_OFFSET		0x0	/* offset to version field */
-+#define IP_VER_MASK		0xf0	/* version mask */
-+#define IP_VER_SHIFT		4	/* version shift */
-+#define IP_VER_4		4	/* version number for IPV4 */
-+#define IP_VER_6		6	/* version number for IPV6 */
-+
-+#define IP_VER(ip_body) \
-+	((((uint8 *)(ip_body))[IP_VER_OFFSET] & IP_VER_MASK) >> IP_VER_SHIFT)
-+
-+#define IP_PROT_ICMP		0x1	/* ICMP protocol */
-+#define IP_PROT_TCP		0x6	/* TCP protocol */
-+#define IP_PROT_UDP		0x11	/* UDP protocol type */
-+
-+/* IPV4 field offsets */
-+#define IPV4_VER_HL_OFFSET	0	/* version and ihl byte offset */
-+#define IPV4_TOS_OFFSET		1	/* type of service offset */
-+#define IPV4_PROT_OFFSET	9	/* protocol type offset */
-+#define IPV4_CHKSUM_OFFSET	10	/* IP header checksum offset */
-+#define IPV4_SRC_IP_OFFSET	12	/* src IP addr offset */
-+#define IPV4_DEST_IP_OFFSET	16	/* dest IP addr offset */
-+
-+/* IPV4 field decodes */
-+#define IPV4_VER_MASK		0xf0	/* IPV4 version mask */
-+#define IPV4_VER_SHIFT		4	/* IPV4 version shift */
-+
-+#define IPV4_HLEN_MASK		0x0f	/* IPV4 header length mask */
-+#define IPV4_HLEN(ipv4_body)	(4 * (((uint8 *)(ipv4_body))[IPV4_VER_HL_OFFSET] & IPV4_HLEN_MASK))
-+
-+#define IPV4_ADDR_LEN		4	/* IPV4 address length */
-+
-+#define IPV4_ADDR_NULL(a)	((((uint8 *)(a))[0] | ((uint8 *)(a))[1] | \
-+				  ((uint8 *)(a))[2] | ((uint8 *)(a))[3]) == 0)
-+
-+#define	IPV4_TOS_DSCP_MASK	0xfc	/* DiffServ codepoint mask */
-+#define	IPV4_TOS_DSCP_SHIFT	2	/* DiffServ codepoint shift */
-+
-+#define	IPV4_TOS(ipv4_body)	(((uint8 *)(ipv4_body))[IPV4_TOS_OFFSET])
-+
-+#define	IPV4_TOS_PREC_MASK	0xe0	/* Historical precedence mask */
-+#define	IPV4_TOS_PREC_SHIFT	5	/* Historical precedence shift */
-+
-+#define IPV4_TOS_LOWDELAY	0x10	/* Lowest delay requested */
-+#define IPV4_TOS_THROUGHPUT	0x8	/* Best throughput requested */
-+#define IPV4_TOS_RELIABILITY	0x4	/* Most reliable delivery requested */
-+
-+#define IPV4_PROT(ipv4_body)	(((uint8 *)(ipv4_body))[IPV4_PROT_OFFSET])
-+
-+#define IPV4_ADDR_STR_LEN	16	/* Max IP address length in string format */
-+
-+/* IPV6 field offsets */
-+#define IPV6_PAYLOAD_LEN_OFFSET	4	/* payload length offset */
-+#define IPV6_NEXT_HDR_OFFSET	6	/* next header/protocol offset */
-+#define IPV6_HOP_LIMIT_OFFSET	7	/* hop limit offset */
-+#define IPV6_SRC_IP_OFFSET	8	/* src IP addr offset */
-+#define IPV6_DEST_IP_OFFSET	24	/* dst IP addr offset */
-+
-+/* IPV6 field decodes */
-+#define IPV6_TRAFFIC_CLASS(ipv6_body) \
-+	(((((uint8 *)(ipv6_body))[0] & 0x0f) << 4) | \
-+	 ((((uint8 *)(ipv6_body))[1] & 0xf0) >> 4))
-+
-+#define IPV6_FLOW_LABEL(ipv6_body) \
-+	(((((uint8 *)(ipv6_body))[1] & 0x0f) << 16) | \
-+	 (((uint8 *)(ipv6_body))[2] << 8) | \
-+	 (((uint8 *)(ipv6_body))[3]))
-+
-+#define IPV6_PAYLOAD_LEN(ipv6_body) \
-+	((((uint8 *)(ipv6_body))[IPV6_PAYLOAD_LEN_OFFSET + 0] << 8) | \
-+	 ((uint8 *)(ipv6_body))[IPV6_PAYLOAD_LEN_OFFSET + 1])
-+
-+#define IPV6_NEXT_HDR(ipv6_body) \
-+	(((uint8 *)(ipv6_body))[IPV6_NEXT_HDR_OFFSET])
-+
-+#define IPV6_PROT(ipv6_body)	IPV6_NEXT_HDR(ipv6_body)
-+
-+#define IPV6_ADDR_LEN		16	/* IPV6 address length */
-+
-+/* IPV4 TOS or IPV6 Traffic Classifier or 0 */
-+#define IP_TOS(ip_body) \
-+	(IP_VER(ip_body) == IP_VER_4 ? IPV4_TOS(ip_body) : \
-+	 IP_VER(ip_body) == IP_VER_6 ? IPV6_TRAFFIC_CLASS(ip_body) : 0)
-+
-+#endif	/* _bcmip_h_ */
-diff -urN linux.old/drivers/net/wl/bcmutils.c linux.dev/drivers/net/wl/bcmutils.c
---- linux.old/drivers/net/wl/bcmutils.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/wl/bcmutils.c	2006-04-28 02:27:20.000000000 +0200
-@@ -0,0 +1,857 @@
-+/*
-+ * Misc useful OS-independent routines.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: bcmutils.c,v 1.1.1.12 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#include <typedefs.h>
-+#include <bcmdefs.h>
-+#include <stdarg.h>
-+#include <osl.h>
-+#include "linux_osl.h"
-+#include "pktq.h"
-+#include <bcmutils.h>
-+#include <sbutils.h>
-+#include <bcmnvram.h>
-+#include <bcmendian.h>
-+#include <bcmdevs.h>
-+#include "bcmip.h"
-+
-+#define ETHER_TYPE_8021Q       0x8100
-+#define ETHER_TYPE_IP          0x0800
-+#define VLAN_PRI_SHIFT             13
-+#define VLAN_PRI_MASK               7
-+
-+
-+struct  ether_header {
-+	uint8   ether_dhost[6];
-+	uint8   ether_shost[6];
-+	uint16  ether_type;
-+} __attribute__((packed));
-+
-+
-+struct ethervlan_header {
-+	uint8   ether_dhost[6];
-+	uint8   ether_shost[6];
-+	uint16  vlan_type;		/* 0x8100 */
-+	uint16  vlan_tag;		/* priority, cfi and vid */
-+	uint16  ether_type;
-+};
-+
-+/* copy a pkt buffer chain into a buffer */
-+uint
-+pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf)
-+{
-+	uint n, ret = 0;
-+
-+	if (len < 0)
-+		len = 4096;	/* "infinite" */
-+
-+	/* skip 'offset' bytes */
-+	for (; p && offset; p = PKTNEXT(osh, p)) {
-+		if (offset < (uint)PKTLEN(osh, p))
-+			break;
-+		offset -= PKTLEN(osh, p);
-+	}
-+
-+	if (!p)
-+		return 0;
-+
-+	/* copy the data */
-+	for (; p && len; p = PKTNEXT(osh, p)) {
-+		n = MIN((uint)PKTLEN(osh, p) - offset, (uint)len);
-+		bcopy(PKTDATA(osh, p) + offset, buf, n);
-+		buf += n;
-+		len -= n;
-+		ret += n;
-+		offset = 0;
-+	}
-+
-+	return ret;
-+}
-+
-+/* return total length of buffer chain */
-+uint
-+pkttotlen(osl_t *osh, void *p)
-+{
-+	uint total;
-+
-+	total = 0;
-+	for (; p; p = PKTNEXT(osh, p))
-+		total += PKTLEN(osh, p);
-+	return (total);
-+}
-+
-+/* return the last buffer of chained pkt */
-+void *
-+pktlast(osl_t *osh, void *p)
-+{
-+	for (; PKTNEXT(osh, p); p = PKTNEXT(osh, p))
-+		;
-+
-+	return (p);
-+}
-+
-+
-+/*
-+ * osl multiple-precedence packet queue
-+ * hi_prec is always >= the number of the highest non-empty queue
-+ */
-+void *
-+pktq_penq(struct pktq *pq, int prec, void *p)
-+{
-+	struct pktq_prec *q;
-+
-+	ASSERT(prec >= 0 && prec < pq->num_prec);
-+	ASSERT(PKTLINK(p) == NULL);         /* queueing chains not allowed */
-+
-+	ASSERT(!pktq_full(pq));
-+	ASSERT(!pktq_pfull(pq, prec));
-+
-+	q = &pq->q[prec];
-+
-+	if (q->head)
-+		PKTSETLINK(q->tail, p);
-+	else
-+		q->head = p;
-+
-+	q->tail = p;
-+	q->len++;
-+
-+	pq->len++;
-+
-+	if (pq->hi_prec < prec)
-+		pq->hi_prec = (uint8)prec;
-+
-+	return p;
-+}
-+
-+void *
-+pktq_penq_head(struct pktq *pq, int prec, void *p)
-+{
-+	struct pktq_prec *q;
-+
-+	ASSERT(prec >= 0 && prec < pq->num_prec);
-+	ASSERT(PKTLINK(p) == NULL);         /* queueing chains not allowed */
-+
-+	ASSERT(!pktq_full(pq));
-+	ASSERT(!pktq_pfull(pq, prec));
-+
-+	q = &pq->q[prec];
-+
-+	if (q->head == NULL)
-+		q->tail = p;
-+
-+	PKTSETLINK(p, q->head);
-+	q->head = p;
-+	q->len++;
-+
-+	pq->len++;
-+
-+	if (pq->hi_prec < prec)
-+		pq->hi_prec = (uint8)prec;
-+
-+	return p;
-+}
-+
-+void *
-+pktq_pdeq(struct pktq *pq, int prec)
-+{
-+	struct pktq_prec *q;
-+	void *p;
-+
-+	ASSERT(prec >= 0 && prec < pq->num_prec);
-+
-+	q = &pq->q[prec];
-+
-+	if ((p = q->head) == NULL)
-+		return NULL;
-+
-+	if ((q->head = PKTLINK(p)) == NULL)
-+		q->tail = NULL;
-+
-+	q->len--;
-+
-+	pq->len--;
-+
-+	PKTSETLINK(p, NULL);
-+
-+	return p;
-+}
-+
-+void *
-+pktq_pdeq_tail(struct pktq *pq, int prec)
-+{
-+	struct pktq_prec *q;
-+	void *p, *prev;
-+
-+	ASSERT(prec >= 0 && prec < pq->num_prec);
-+
-+	q = &pq->q[prec];
-+
-+	if ((p = q->head) == NULL)
-+		return NULL;
-+
-+	for (prev = NULL; p != q->tail; p = PKTLINK(p))
-+		prev = p;
-+
-+	if (prev)
-+		PKTSETLINK(prev, NULL);
-+	else
-+		q->head = NULL;
-+
-+	q->tail = prev;
-+	q->len--;
-+
-+	pq->len--;
-+
-+	return p;
-+}
-+
-+void
-+pktq_pflush(osl_t *osh, struct pktq *pq, int prec, bool dir)
-+{
-+	struct pktq_prec *q;
-+	void *p;
-+
-+	q = &pq->q[prec];
-+	p = q->head;
-+	while (p) {
-+		q->head = PKTLINK(p);
-+		PKTSETLINK(p, NULL);
-+		PKTFREE(osh, p, dir);
-+		q->len--;
-+		pq->len--;
-+		p = q->head;
-+	}
-+	ASSERT(q->len == 0);
-+	q->tail = NULL;
-+}
-+
-+bool
-+pktq_pdel(struct pktq *pq, void *pktbuf, int prec)
-+{
-+	struct pktq_prec *q;
-+	void *p;
-+
-+	ASSERT(prec >= 0 && prec < pq->num_prec);
-+
-+	if (!pktbuf)
-+		return FALSE;
-+
-+	q = &pq->q[prec];
-+
-+	if (q->head == pktbuf) {
-+		if ((q->head = PKTLINK(pktbuf)) == NULL)
-+			q->tail = NULL;
-+	} else {
-+		for (p = q->head; p && PKTLINK(p) != pktbuf; p = PKTLINK(p))
-+			;
-+		if (p == NULL)
-+			return FALSE;
-+
-+		PKTSETLINK(p, PKTLINK(pktbuf));
-+		if (q->tail == pktbuf)
-+			q->tail = p;
-+	}
-+
-+	q->len--;
-+	pq->len--;
-+	PKTSETLINK(pktbuf, NULL);
-+	return TRUE;
-+}
-+
-+void
-+pktq_init(struct pktq *pq, int num_prec, int max_len)
-+{
-+	int prec;
-+
-+	ASSERT(num_prec > 0 && num_prec <= PKTQ_MAX_PREC);
-+
-+	bzero(pq, sizeof(*pq));
-+
-+	pq->num_prec = (uint16)num_prec;
-+
-+	pq->max = (uint16)max_len;
-+
-+	for (prec = 0; prec < num_prec; prec++)
-+		pq->q[prec].max = pq->max;
-+}
-+
-+void *
-+pktq_deq(struct pktq *pq, int *prec_out)
-+{
-+	struct pktq_prec *q;
-+	void *p;
-+	int prec;
-+
-+	if (pq->len == 0)
-+		return NULL;
-+
-+	while ((prec = pq->hi_prec) > 0 && pq->q[prec].head == NULL)
-+		pq->hi_prec--;
-+
-+	q = &pq->q[prec];
-+
-+	if ((p = q->head) == NULL)
-+		return NULL;
-+
-+	if ((q->head = PKTLINK(p)) == NULL)
-+		q->tail = NULL;
-+
-+	q->len--;
-+
-+	pq->len--;
-+
-+	if (prec_out)
-+		*prec_out = prec;
-+
-+	PKTSETLINK(p, NULL);
-+
-+	return p;
-+}
-+
-+void *
-+pktq_deq_tail(struct pktq *pq, int *prec_out)
-+{
-+	struct pktq_prec *q;
-+	void *p, *prev;
-+	int prec;
-+
-+	if (pq->len == 0)
-+		return NULL;
-+
-+	for (prec = 0; prec < pq->hi_prec; prec++)
-+		if (pq->q[prec].head)
-+			break;
-+
-+	q = &pq->q[prec];
-+
-+	if ((p = q->head) == NULL)
-+		return NULL;
-+
-+	for (prev = NULL; p != q->tail; p = PKTLINK(p))
-+		prev = p;
-+
-+	if (prev)
-+		PKTSETLINK(prev, NULL);
-+	else
-+		q->head = NULL;
-+
-+	q->tail = prev;
-+	q->len--;
-+
-+	pq->len--;
-+
-+	if (prec_out)
-+		*prec_out = prec;
-+
-+	PKTSETLINK(p, NULL);
-+
-+	return p;
-+}
-+
-+void *
-+pktq_peek(struct pktq *pq, int *prec_out)
-+{
-+	int prec;
-+
-+	if (pq->len == 0)
-+		return NULL;
-+
-+	while ((prec = pq->hi_prec) > 0 && pq->q[prec].head == NULL)
-+		pq->hi_prec--;
-+
-+	if (prec_out)
-+		*prec_out = prec;
-+
-+	return (pq->q[prec].head);
-+}
-+
-+void *
-+pktq_peek_tail(struct pktq *pq, int *prec_out)
-+{
-+	int prec;
-+
-+	if (pq->len == 0)
-+		return NULL;
-+
-+	for (prec = 0; prec < pq->hi_prec; prec++)
-+		if (pq->q[prec].head)
-+			break;
-+
-+	if (prec_out)
-+		*prec_out = prec;
-+
-+	return (pq->q[prec].tail);
-+}
-+
-+void
-+pktq_flush(osl_t *osh, struct pktq *pq, bool dir)
-+{
-+	int prec;
-+	for (prec = 0; prec < pq->num_prec; prec++)
-+		pktq_pflush(osh, pq, prec, dir);
-+	ASSERT(pq->len == 0);
-+}
-+
-+/* Return sum of lengths of a specific set of precedences */
-+int
-+pktq_mlen(struct pktq *pq, uint prec_bmp)
-+{
-+	int prec, len;
-+
-+	len = 0;
-+
-+	for (prec = 0; prec <= pq->hi_prec; prec++)
-+		if (prec_bmp & (1 << prec))
-+			len += pq->q[prec].len;
-+
-+	return len;
-+}
-+
-+/* Priority dequeue from a specific set of precedences */
-+void *
-+pktq_mdeq(struct pktq *pq, uint prec_bmp, int *prec_out)
-+{
-+	struct pktq_prec *q;
-+	void *p;
-+	int prec;
-+
-+	if (pq->len == 0)
-+		return NULL;
-+
-+	while ((prec = pq->hi_prec) > 0 && pq->q[prec].head == NULL)
-+		pq->hi_prec--;
-+
-+	while ((prec_bmp & (1 << prec)) == 0 || pq->q[prec].head == NULL)
-+		if (prec-- == 0)
-+			return NULL;
-+
-+	q = &pq->q[prec];
-+
-+	if ((p = q->head) == NULL)
-+		return NULL;
-+
-+	if ((q->head = PKTLINK(p)) == NULL)
-+		q->tail = NULL;
-+
-+	q->len--;
-+
-+	if (prec_out)
-+		*prec_out = prec;
-+
-+	pq->len--;
-+
-+	PKTSETLINK(p, NULL);
-+
-+	return p;
-+}
-+
-+char*
-+bcmstrcat(char *dest, const char *src)
-+{
-+	strcpy(&dest[strlen(dest)], src);
-+	return (dest);
-+}
-+
-+char*
-+bcm_ether_ntoa(struct ether_addr *ea, char *buf)
-+{
-+	sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x",
-+		ea->octet[0]&0xff, ea->octet[1]&0xff, ea->octet[2]&0xff,
-+		ea->octet[3]&0xff, ea->octet[4]&0xff, ea->octet[5]&0xff);
-+	return (buf);
-+}
-+
-+/* parse a xx:xx:xx:xx:xx:xx format ethernet address */
-+int
-+bcm_ether_atoe(char *p, struct ether_addr *ea)
-+{
-+	int i = 0;
-+
-+	for (;;) {
-+		ea->octet[i++] = (char) bcm_strtoul(p, &p, 16);
-+		if (!*p++ || i == 6)
-+			break;
-+	}
-+
-+	return (i == 6);
-+}
-+
-+/* Takes an Ethernet frame and sets out-of-bound PKTPRIO
-+ * Also updates the inplace vlan tag if requested
-+ */
-+void
-+pktsetprio(void *pkt, bool update_vtag)
-+{
-+	struct ether_header *eh;
-+	struct ethervlan_header *evh;
-+	uint8 *pktdata;
-+	int priority = 0;
-+
-+	pktdata = (uint8 *) PKTDATA(NULL, pkt);
-+	ASSERT(ISALIGNED((uintptr)pktdata, sizeof(uint16)));
-+
-+	eh = (struct ether_header *) pktdata;
-+
-+	if (ntoh16(eh->ether_type) == ETHER_TYPE_8021Q) {
-+		uint16 vlan_tag;
-+		int vlan_prio, dscp_prio = 0;
-+
-+		evh = (struct ethervlan_header *)eh;
-+
-+		vlan_tag = ntoh16(evh->vlan_tag);
-+		vlan_prio = (int) (vlan_tag >> VLAN_PRI_SHIFT) & VLAN_PRI_MASK;
-+
-+		if (ntoh16(evh->ether_type) == ETHER_TYPE_IP) {
-+			uint8 *ip_body = pktdata + sizeof(struct ethervlan_header);
-+			uint8 tos_tc = IP_TOS(ip_body);
-+			dscp_prio = (int)(tos_tc >> IPV4_TOS_PREC_SHIFT);
-+		}
-+
-+		/* DSCP priority gets precedence over 802.1P (vlan tag) */
-+		priority = (dscp_prio != 0) ? dscp_prio : vlan_prio;
-+
-+		/* 
-+		 * If the DSCP priority is not the same as the VLAN priority,
-+		 * then overwrite the priority field in the vlan tag, with the
-+		 * DSCP priority value. This is required for Linux APs because
-+		 * the VLAN driver on Linux, overwrites the skb->priority field
-+		 * with the priority value in the vlan tag
-+		 */
-+		if (update_vtag && (priority != vlan_prio)) {
-+			vlan_tag &= ~(VLAN_PRI_MASK << VLAN_PRI_SHIFT);
-+			vlan_tag |= (uint16)priority << VLAN_PRI_SHIFT;
-+			evh->vlan_tag = hton16(vlan_tag);
-+		}
-+	} else if (ntoh16(eh->ether_type) == ETHER_TYPE_IP) {
-+		uint8 *ip_body = pktdata + sizeof(struct ether_header);
-+		uint8 tos_tc = IP_TOS(ip_body);
-+		priority = (int)(tos_tc >> IPV4_TOS_PREC_SHIFT);
-+	}
-+
-+	ASSERT(priority >= 0 && priority <= MAXPRIO);
-+	PKTSETPRIO(pkt, priority);
-+}
-+
-+static char bcm_undeferrstr[BCME_STRLEN];
-+
-+static const char *bcmerrorstrtable[] = BCMERRSTRINGTABLE;
-+
-+/* Convert the Error codes into related Error strings  */
-+const char *
-+bcmerrorstr(int bcmerror)
-+{
-+	int abs_bcmerror;
-+
-+	abs_bcmerror = ABS(bcmerror);
-+
-+	/* check if someone added a bcmerror code but forgot to add errorstring */
-+	ASSERT(ABS(BCME_LAST) == (ARRAYSIZE(bcmerrorstrtable) - 1));
-+	if ((bcmerror > 0) || (abs_bcmerror > ABS(BCME_LAST))) {
-+		sprintf(bcm_undeferrstr, "undefined Error %d", bcmerror);
-+		return bcm_undeferrstr;
-+	}
-+
-+	ASSERT((strlen((char*)bcmerrorstrtable[abs_bcmerror])) < BCME_STRLEN);
-+
-+	return bcmerrorstrtable[abs_bcmerror];
-+}
-+
-+
-+int
-+bcm_iovar_lencheck(const bcm_iovar_t *vi, void *arg, int len, bool set)
-+{
-+	int bcmerror = 0;
-+
-+	/* length check on io buf */
-+	switch (vi->type) {
-+	case IOVT_BOOL:
-+	case IOVT_INT8:
-+	case IOVT_INT16:
-+	case IOVT_INT32:
-+	case IOVT_UINT8:
-+	case IOVT_UINT16:
-+	case IOVT_UINT32:
-+		/* all integers are int32 sized args at the ioctl interface */
-+		if (len < (int)sizeof(int)) {
-+			bcmerror = BCME_BUFTOOSHORT;
-+		}
-+		break;
-+
-+	case IOVT_BUFFER:
-+		/* buffer must meet minimum length requirement */
-+		if (len < vi->minlen) {
-+			bcmerror = BCME_BUFTOOSHORT;
-+		}
-+		break;
-+
-+	case IOVT_VOID:
-+		if (!set) {
-+			/* Cannot return nil... */
-+			bcmerror = BCME_UNSUPPORTED;
-+		} else if (len) {
-+			/* Set is an action w/o parameters */
-+			bcmerror = BCME_BUFTOOLONG;
-+		}
-+		break;
-+
-+	default:
-+		/* unknown type for length check in iovar info */
-+		ASSERT(0);
-+		bcmerror = BCME_UNSUPPORTED;
-+	}
-+
-+	return bcmerror;
-+}
-+
-+#define CRC_INNER_LOOP(n, c, x) \
-+		    (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
-+
-+static uint32 crc32_table[256] = {
-+    0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
-+    0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
-+    0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
-+    0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
-+    0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
-+    0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
-+    0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
-+    0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
-+    0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
-+    0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
-+    0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
-+    0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
-+    0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
-+    0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
-+    0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
-+    0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
-+    0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
-+    0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
-+    0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
-+    0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
-+    0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
-+    0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
-+    0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
-+    0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
-+    0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
-+    0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
-+    0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
-+    0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
-+    0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
-+    0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
-+    0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
-+    0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
-+    0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
-+    0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
-+    0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
-+    0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
-+    0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
-+    0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
-+    0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
-+    0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
-+    0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
-+    0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
-+    0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
-+    0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
-+    0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
-+    0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
-+    0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
-+    0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
-+    0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
-+    0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
-+    0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
-+    0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
-+    0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
-+    0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
-+    0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
-+    0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
-+    0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
-+    0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
-+    0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
-+    0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
-+    0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
-+    0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
-+    0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
-+    0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
-+};
-+
-+uint32
-+hndcrc32(
-+    uint8 *pdata,  /* pointer to array of data to process */
-+    uint   nbytes, /* number of input data bytes to process */
-+    uint32 crc     /* either CRC32_INIT_VALUE or previous return value */
-+)
-+{
-+	uint8 *pend;
-+#ifdef __mips__
-+	uint8 tmp[4];
-+	ulong *tptr = (ulong *)tmp;
-+
-+	/* in case the beginning of the buffer isn't aligned */
-+	pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc);
-+	nbytes -= (pend - pdata);
-+	while (pdata < pend)
-+		CRC_INNER_LOOP(32, crc, *pdata++);
-+
-+	/* handle bulk of data as 32-bit words */
-+	pend = pdata + (nbytes & 0xfffffffc);
-+	while (pdata < pend) {
-+		*tptr = *(ulong *)pdata;
-+		pdata += sizeof(ulong *);
-+		CRC_INNER_LOOP(32, crc, tmp[0]);
-+		CRC_INNER_LOOP(32, crc, tmp[1]);
-+		CRC_INNER_LOOP(32, crc, tmp[2]);
-+		CRC_INNER_LOOP(32, crc, tmp[3]);
-+	}
-+
-+	/* 1-3 bytes at end of buffer */
-+	pend = pdata + (nbytes & 0x03);
-+	while (pdata < pend)
-+		CRC_INNER_LOOP(32, crc, *pdata++);
-+#else
-+	pend = pdata + nbytes;
-+	while (pdata < pend)
-+		CRC_INNER_LOOP(32, crc, *pdata++);
-+#endif /* __mips__ */
-+
-+	return crc;
-+}
-+
-+
-+/*
-+ * Advance from the current 1-byte tag/1-byte length/variable-length value
-+ * triple, to the next, returning a pointer to the next.
-+ * If the current or next TLV is invalid (does not fit in given buffer length),
-+ * NULL is returned.
-+ * *buflen is not modified if the TLV elt parameter is invalid, or is decremented
-+ * by the TLV paramter's length if it is valid.
-+ */
-+bcm_tlv_t *
-+bcm_next_tlv(bcm_tlv_t *elt, int *buflen)
-+{
-+	int len;
-+
-+	/* validate current elt */
-+	if (!bcm_valid_tlv(elt, *buflen))
-+		return NULL;
-+
-+	/* advance to next elt */
-+	len = elt->len;
-+	elt = (bcm_tlv_t*)(elt->data + len);
-+	*buflen -= (2 + len);
-+
-+	/* validate next elt */
-+	if (!bcm_valid_tlv(elt, *buflen))
-+		return NULL;
-+
-+	return elt;
-+}
-+
-+/*
-+ * Traverse a string of 1-byte tag/1-byte length/variable-length value
-+ * triples, returning a pointer to the substring whose first element
-+ * matches tag
-+ */
-+bcm_tlv_t *
-+bcm_parse_tlvs(void *buf, int buflen, uint key)
-+{
-+	bcm_tlv_t *elt;
-+	int totlen;
-+
-+	elt = (bcm_tlv_t*)buf;
-+	totlen = buflen;
-+
-+	/* find tagged parameter */
-+	while (totlen >= 2) {
-+		int len = elt->len;
-+
-+		/* validate remaining totlen */
-+		if ((elt->id == key) && (totlen >= (len + 2)))
-+			return (elt);
-+
-+		elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
-+		totlen -= (len + 2);
-+	}
-+
-+	return NULL;
-+}
-+
-+/*
-+ * Traverse a string of 1-byte tag/1-byte length/variable-length value
-+ * triples, returning a pointer to the substring whose first element
-+ * matches tag.  Stop parsing when we see an element whose ID is greater
-+ * than the target key.
-+ */
-+bcm_tlv_t *
-+bcm_parse_ordered_tlvs(void *buf, int buflen, uint key)
-+{
-+	bcm_tlv_t *elt;
-+	int totlen;
-+
-+	elt = (bcm_tlv_t*)buf;
-+	totlen = buflen;
-+
-+	/* find tagged parameter */
-+	while (totlen >= 2) {
-+		uint id = elt->id;
-+		int len = elt->len;
-+
-+		/* Punt if we start seeing IDs > than target key */
-+		if (id > key)
-+			return (NULL);
-+
-+		/* validate remaining totlen */
-+		if ((id == key) && (totlen >= (len + 2)))
-+			return (elt);
-+
-+		elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
-+		totlen -= (len + 2);
-+	}
-+	return NULL;
-+}
-+
-+
-+/* Initialization of bcmstrbuf structure */
-+void
-+bcm_binit(struct bcmstrbuf *b, char *buf, uint size)
-+{
-+	b->origsize = b->size = size;
-+	b->origbuf = b->buf = buf;
-+}
-+
-+/* Buffer sprintf wrapper to guard against buffer overflow */
-+int
-+bcm_bprintf(struct bcmstrbuf *b, const char *fmt, ...)
-+{
-+	va_list ap;
-+	int r;
-+
-+	va_start(ap, fmt);
-+	r = vsnprintf(b->buf, b->size, fmt, ap);
-+
-+	/* Non Ansi C99 compliant returns -1,
-+	 * Ansi compliant return r >= b->size,
-+	 * bcmstdlib returns 0, handle all
-+	 */
-+	if ((r == -1) || (r >= (int)b->size) || (r == 0))
-+	{
-+		b->size = 0;
-+	}
-+	else
-+	{
-+		b->size -= r;
-+		b->buf += r;
-+	}
-+
-+	va_end(ap);
-+
-+	return r;
-+}
-diff -urN linux.old/drivers/net/wl/hnddma.c linux.dev/drivers/net/wl/hnddma.c
---- linux.old/drivers/net/wl/hnddma.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/wl/hnddma.c	2006-05-02 17:42:13.000000000 +0200
-@@ -0,0 +1,1157 @@
-+/*
-+ * Generic Broadcom Home Networking Division (HND) DMA module.
-+ * This supports the following chips: BCM42xx, 44xx, 47xx .
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: hnddma.c,v 1.11 2006/04/08 07:12:42 honor Exp $
-+ */
-+
-+#include <typedefs.h>
-+#include <bcmdefs.h>
-+#include <osl.h>
-+#include "linux_osl.h"
-+#include <bcmendian.h>
-+#include <sbconfig.h>
-+#include <bcmutils.h>
-+#include <bcmdevs.h>
-+#include <sbutils.h>
-+
-+#include "sbhnddma.h"
-+#include "hnddma.h"
-+
-+/* debug/trace */
-+#define	DMA_ERROR(args)
-+#define	DMA_TRACE(args)
-+
-+/* default dma message level (if input msg_level pointer is null in dma_attach()) */
-+static uint dma_msg_level =
-+	0;
-+
-+#define	MAXNAMEL	8		/* 8 char names */
-+
-+#define	DI_INFO(dmah)	(dma_info_t *)dmah
-+
-+/* dma engine software state */
-+typedef struct dma_info {
-+	struct hnddma_pub hnddma;	/* exported structure, don't use hnddma_t,
-+					 * which could be const
-+					 */
-+	uint		*msg_level;	/* message level pointer */
-+	char		name[MAXNAMEL];	/* callers name for diag msgs */
-+
-+	void		*osh;		/* os handle */
-+	sb_t		*sbh;		/* sb handle */
-+
-+	bool		dma64;		/* dma64 enabled */
-+	bool		addrext;	/* this dma engine supports DmaExtendedAddrChanges */
-+
-+	dma32regs_t	*d32txregs;	/* 32 bits dma tx engine registers */
-+	dma32regs_t	*d32rxregs;	/* 32 bits dma rx engine registers */
-+	dma64regs_t	*d64txregs;	/* 64 bits dma tx engine registers */
-+	dma64regs_t	*d64rxregs;	/* 64 bits dma rx engine registers */
-+
-+	uint32		dma64align;	/* either 8k or 4k depends on number of dd */
-+	dma32dd_t	*txd32;		/* pointer to dma32 tx descriptor ring */
-+	dma64dd_t	*txd64;		/* pointer to dma64 tx descriptor ring */
-+	uint		ntxd;		/* # tx descriptors tunable */
-+	uint		txin;		/* index of next descriptor to reclaim */
-+	uint		txout;		/* index of next descriptor to post */
-+	void		**txp;		/* pointer to parallel array of pointers to packets */
-+	osldma_t 	*tx_dmah;	/* DMA TX descriptor ring handle */
-+	osldma_t	**txp_dmah;	/* DMA TX packet data handle */
-+	ulong		txdpa;		/* physical address of descriptor ring */
-+	uint		txdalign;	/* #bytes added to alloc'd mem to align txd */
-+	uint		txdalloc;	/* #bytes allocated for the ring */
-+
-+	dma32dd_t	*rxd32;		/* pointer to dma32 rx descriptor ring */
-+	dma64dd_t	*rxd64;		/* pointer to dma64 rx descriptor ring */
-+	uint		nrxd;		/* # rx descriptors tunable */
-+	uint		rxin;		/* index of next descriptor to reclaim */
-+	uint		rxout;		/* index of next descriptor to post */
-+	void		**rxp;		/* pointer to parallel array of pointers to packets */
-+	osldma_t 	*rx_dmah;	/* DMA RX descriptor ring handle */
-+	osldma_t	**rxp_dmah;	/* DMA RX packet data handle */
-+	ulong		rxdpa;		/* physical address of descriptor ring */
-+	uint		rxdalign;	/* #bytes added to alloc'd mem to align rxd */
-+	uint		rxdalloc;	/* #bytes allocated for the ring */
-+
-+	/* tunables */
-+	uint		rxbufsize;	/* rx buffer size in bytes,
-+					   not including the extra headroom
-+					*/
-+	uint		nrxpost;	/* # rx buffers to keep posted */
-+	uint		rxoffset;	/* rxcontrol offset */
-+	uint		ddoffsetlow;	/* add to get dma address of descriptor ring, low 32 bits */
-+	uint		ddoffsethigh;	/*   high 32 bits */
-+	uint		dataoffsetlow;	/* add to get dma address of data buffer, low 32 bits */
-+	uint		dataoffsethigh;	/*   high 32 bits */
-+} dma_info_t;
-+
-+/* descriptor bumping macros */
-+#define	XXD(x, n)	((x) & ((n) - 1))	/* faster than %, but n must be power of 2 */
-+#define	TXD(x)		XXD((x), di->ntxd)
-+#define	RXD(x)		XXD((x), di->nrxd)
-+#define	NEXTTXD(i)	TXD(i + 1)
-+#define	PREVTXD(i)	TXD(i - 1)
-+#define	NEXTRXD(i)	RXD(i + 1)
-+#define	NTXDACTIVE(h, t)	TXD(t - h)
-+#define	NRXDACTIVE(h, t)	RXD(t - h)
-+
-+/* macros to convert between byte offsets and indexes */
-+#define	B2I(bytes, type)	((bytes) / sizeof(type))
-+#define	I2B(index, type)	((index) * sizeof(type))
-+
-+#define	PCI32ADDR_HIGH		0xc0000000	/* address[31:30] */
-+#define	PCI32ADDR_HIGH_SHIFT	30		/* address[31:30] */
-+
-+
-+/* common prototypes */
-+static bool _dma_isaddrext(dma_info_t *di);
-+static bool dma32_alloc(dma_info_t *di, uint direction);
-+static void _dma_detach(dma_info_t *di);
-+static void _dma_ddtable_init(dma_info_t *di, uint direction, ulong pa);
-+static void _dma_rxinit(dma_info_t *di);
-+static void *_dma_rx(dma_info_t *di);
-+static void _dma_rxfill(dma_info_t *di);
-+static void _dma_rxreclaim(dma_info_t *di);
-+static void _dma_rxenable(dma_info_t *di);
-+static void * _dma_getnextrxp(dma_info_t *di, bool forceall);
-+
-+static void _dma_txblock(dma_info_t *di);
-+static void _dma_txunblock(dma_info_t *di);
-+static uint _dma_txactive(dma_info_t *di);
-+
-+static void* _dma_peeknexttxp(dma_info_t *di);
-+static uintptr _dma_getvar(dma_info_t *di, char *name);
-+static void _dma_counterreset(dma_info_t *di);
-+static void _dma_fifoloopbackenable(dma_info_t *di);
-+
-+/* ** 32 bit DMA prototypes */
-+static bool dma32_alloc(dma_info_t *di, uint direction);
-+static bool dma32_txreset(dma_info_t *di);
-+static bool dma32_rxreset(dma_info_t *di);
-+static bool dma32_txsuspendedidle(dma_info_t *di);
-+static int  dma32_txfast(dma_info_t *di, void *p0, bool commit);
-+static void *dma32_getnexttxp(dma_info_t *di, bool forceall);
-+static void *dma32_getnextrxp(dma_info_t *di, bool forceall);
-+static void dma32_txrotate(dma_info_t *di);
-+static bool dma32_rxidle(dma_info_t *di);
-+static void dma32_txinit(dma_info_t *di);
-+static bool dma32_txenabled(dma_info_t *di);
-+static void dma32_txsuspend(dma_info_t *di);
-+static void dma32_txresume(dma_info_t *di);
-+static bool dma32_txsuspended(dma_info_t *di);
-+static void dma32_txreclaim(dma_info_t *di, bool forceall);
-+static bool dma32_txstopped(dma_info_t *di);
-+static bool dma32_rxstopped(dma_info_t *di);
-+static bool dma32_rxenabled(dma_info_t *di);
-+static bool _dma32_addrext(osl_t *osh, dma32regs_t *dma32regs);
-+
-+
-+static di_fcn_t dma32proc = {
-+	(di_detach_t)_dma_detach,
-+	(di_txinit_t)dma32_txinit,
-+	(di_txreset_t)dma32_txreset,
-+	(di_txenabled_t)dma32_txenabled,
-+	(di_txsuspend_t)dma32_txsuspend,
-+	(di_txresume_t)dma32_txresume,
-+	(di_txsuspended_t)dma32_txsuspended,
-+	(di_txsuspendedidle_t)dma32_txsuspendedidle,
-+	(di_txfast_t)dma32_txfast,
-+	(di_txstopped_t)dma32_txstopped,
-+	(di_txreclaim_t)dma32_txreclaim,
-+	(di_getnexttxp_t)dma32_getnexttxp,
-+	(di_peeknexttxp_t)_dma_peeknexttxp,
-+	(di_txblock_t)_dma_txblock,
-+	(di_txunblock_t)_dma_txunblock,
-+	(di_txactive_t)_dma_txactive,
-+	(di_txrotate_t)dma32_txrotate,
-+
-+	(di_rxinit_t)_dma_rxinit,
-+	(di_rxreset_t)dma32_rxreset,
-+	(di_rxidle_t)dma32_rxidle,
-+	(di_rxstopped_t)dma32_rxstopped,
-+	(di_rxenable_t)_dma_rxenable,
-+	(di_rxenabled_t)dma32_rxenabled,
-+	(di_rx_t)_dma_rx,
-+	(di_rxfill_t)_dma_rxfill,
-+	(di_rxreclaim_t)_dma_rxreclaim,
-+	(di_getnextrxp_t)_dma_getnextrxp,
-+
-+	(di_fifoloopbackenable_t)_dma_fifoloopbackenable,
-+	(di_getvar_t)_dma_getvar,
-+	(di_counterreset_t)_dma_counterreset,
-+
-+	NULL,
-+	NULL,
-+	NULL,
-+	34
-+};
-+
-+hnddma_t *
-+dma_attach(osl_t *osh, char *name, sb_t *sbh, void *dmaregstx, void *dmaregsrx,
-+           uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, uint *msg_level)
-+{
-+	dma_info_t *di;
-+	uint size;
-+
-+	/* allocate private info structure */
-+	if ((di = MALLOC(osh, sizeof (dma_info_t))) == NULL) {
-+		return (NULL);
-+	}
-+	bzero((char *)di, sizeof(dma_info_t));
-+
-+	di->msg_level = msg_level ? msg_level : &dma_msg_level;
-+
-+	/* old chips w/o sb is no longer supported */
-+	ASSERT(sbh != NULL);
-+
-+	/* check arguments */
-+	ASSERT(ISPOWEROF2(ntxd));
-+	ASSERT(ISPOWEROF2(nrxd));
-+	if (nrxd == 0)
-+		ASSERT(dmaregsrx == NULL);
-+	if (ntxd == 0)
-+		ASSERT(dmaregstx == NULL);
-+
-+
-+	/* init dma reg pointer */
-+	ASSERT(ntxd <= D32MAXDD);
-+	ASSERT(nrxd <= D32MAXDD);
-+	di->d32txregs = (dma32regs_t *)dmaregstx;
-+	di->d32rxregs = (dma32regs_t *)dmaregsrx;
-+
-+	DMA_TRACE(("%s: dma_attach: %s osh %p ntxd %d nrxd %d rxbufsize %d nrxpost %d "
-+	           "rxoffset %d dmaregstx %p dmaregsrx %p\n",
-+	           name, "DMA32", osh, ntxd, nrxd, rxbufsize,
-+	           nrxpost, rxoffset, dmaregstx, dmaregsrx));
-+
-+	/* make a private copy of our callers name */
-+	strncpy(di->name, name, MAXNAMEL);
-+	di->name[MAXNAMEL-1] = '\0';
-+
-+	di->osh = osh;
-+	di->sbh = sbh;
-+
-+	/* save tunables */
-+	di->ntxd = ntxd;
-+	di->nrxd = nrxd;
-+
-+	/* the actual dma size doesn't include the extra headroom */
-+	if (rxbufsize > BCMEXTRAHDROOM)
-+		di->rxbufsize = rxbufsize - BCMEXTRAHDROOM;
-+	else
-+		di->rxbufsize = rxbufsize;
-+
-+	di->nrxpost = nrxpost;
-+	di->rxoffset = rxoffset;
-+
-+	/*
-+	 * figure out the DMA physical address offset for dd and data
-+	 *   for old chips w/o sb, use zero
-+	 *   for new chips w sb,
-+	 *     PCI/PCIE: they map silicon backplace address to zero based memory, need offset
-+	 *     Other bus: use zero
-+	 *     SB_BUS BIGENDIAN kludge: use sdram swapped region for data buffer, not descriptor
-+	 */
-+	di->ddoffsetlow = 0;
-+	di->dataoffsetlow = 0;
-+	/* for pci bus, add offset */
-+	if (sbh->bustype == PCI_BUS) {
-+		di->ddoffsetlow = SB_PCI_DMA;
-+		di->ddoffsethigh = 0;
-+		di->dataoffsetlow =  di->ddoffsetlow;
-+		di->dataoffsethigh =  di->ddoffsethigh;
-+	}
-+
-+#if defined(__mips__) && defined(IL_BIGENDIAN)
-+	di->dataoffsetlow = di->dataoffsetlow + SB_SDRAM_SWAPPED;
-+#endif
-+
-+	di->addrext = _dma_isaddrext(di);
-+
-+	/* allocate tx packet pointer vector */
-+	if (ntxd) {
-+		size = ntxd * sizeof(void *);
-+		if ((di->txp = MALLOC(osh, size)) == NULL) {
-+			DMA_ERROR(("%s: dma_attach: out of tx memory, malloced %d bytes\n",
-+			           di->name, MALLOCED(osh)));
-+			goto fail;
-+		}
-+		bzero((char *)di->txp, size);
-+	}
-+
-+	/* allocate rx packet pointer vector */
-+	if (nrxd) {
-+		size = nrxd * sizeof(void *);
-+		if ((di->rxp = MALLOC(osh, size)) == NULL) {
-+			DMA_ERROR(("%s: dma_attach: out of rx memory, malloced %d bytes\n",
-+			           di->name, MALLOCED(osh)));
-+			goto fail;
-+		}
-+		bzero((char *)di->rxp, size);
-+	}
-+
-+	/* allocate transmit descriptor ring, only need ntxd descriptors but it must be aligned */
-+	if (ntxd) {
-+		if (!dma32_alloc(di, DMA_TX))
-+			goto fail;
-+	}
-+
-+	/* allocate receive descriptor ring, only need nrxd descriptors but it must be aligned */
-+	if (nrxd) {
-+		if (!dma32_alloc(di, DMA_RX))
-+			goto fail;
-+	}
-+
-+	if ((di->ddoffsetlow == SB_PCI_DMA) && (di->txdpa > SB_PCI_DMA_SZ) && !di->addrext) {
-+		DMA_ERROR(("%s: dma_attach: txdpa 0x%lx: addrext not supported\n",
-+		           di->name, di->txdpa));
-+		goto fail;
-+	}
-+	if ((di->ddoffsetlow == SB_PCI_DMA) && (di->rxdpa > SB_PCI_DMA_SZ) && !di->addrext) {
-+		DMA_ERROR(("%s: dma_attach: rxdpa 0x%lx: addrext not supported\n",
-+		           di->name, di->rxdpa));
-+		goto fail;
-+	}
-+
-+	DMA_TRACE(("ddoffsetlow 0x%x ddoffsethigh 0x%x dataoffsetlow 0x%x dataoffsethigh "
-+	           "0x%x addrext %d\n", di->ddoffsetlow, di->ddoffsethigh, di->dataoffsetlow,
-+	           di->dataoffsethigh, di->addrext));
-+
-+	/* allocate tx packet pointer vector and DMA mapping vectors */
-+	if (ntxd) {
-+
-+		size = ntxd * sizeof(osldma_t **);
-+		if ((di->txp_dmah = (osldma_t **)MALLOC(osh, size)) == NULL)
-+			goto fail;
-+		bzero((char*)di->txp_dmah, size);
-+	}else
-+		di->txp_dmah = NULL;
-+
-+	/* allocate rx packet pointer vector and DMA mapping vectors */
-+	if (nrxd) {
-+
-+		size = nrxd * sizeof(osldma_t **);
-+		if ((di->rxp_dmah = (osldma_t **)MALLOC(osh, size)) == NULL)
-+			goto fail;
-+		bzero((char*)di->rxp_dmah, size);
-+
-+	} else
-+		di->rxp_dmah = NULL;
-+
-+	/* initialize opsvec of function pointers */
-+	di->hnddma.di_fn = dma32proc;
-+
-+	return ((hnddma_t *)di);
-+
-+fail:
-+	_dma_detach(di);
-+	return (NULL);
-+}
-+
-+/* init the tx or rx descriptor */
-+static INLINE void
-+dma32_dd_upd(dma_info_t *di, dma32dd_t *ddring, ulong pa, uint outidx, uint32 *flags,
-+             uint32 bufcount)
-+{
-+	/* dma32 uses 32 bits control to fit both flags and bufcounter */
-+	*flags = *flags | (bufcount & CTRL_BC_MASK);
-+
-+	if ((di->dataoffsetlow != SB_PCI_DMA) || !(pa & PCI32ADDR_HIGH)) {
-+		W_SM(&ddring[outidx].addr, BUS_SWAP32(pa + di->dataoffsetlow));
-+		W_SM(&ddring[outidx].ctrl, BUS_SWAP32(*flags));
-+	} else {
-+		/* address extension */
-+		uint32 ae;
-+		ASSERT(di->addrext);
-+		ae = (pa & PCI32ADDR_HIGH) >> PCI32ADDR_HIGH_SHIFT;
-+		pa &= ~PCI32ADDR_HIGH;
-+
-+		*flags |= (ae << CTRL_AE_SHIFT);
-+		W_SM(&ddring[outidx].addr, BUS_SWAP32(pa + di->dataoffsetlow));
-+		W_SM(&ddring[outidx].ctrl, BUS_SWAP32(*flags));
-+	}
-+}
-+
-+static bool
-+_dma32_addrext(osl_t *osh, dma32regs_t *dma32regs)
-+{
-+	uint32 w;
-+
-+	OR_REG(osh, &dma32regs->control, XC_AE);
-+	w = R_REG(osh, &dma32regs->control);
-+	AND_REG(osh, &dma32regs->control, ~XC_AE);
-+	return ((w & XC_AE) == XC_AE);
-+}
-+
-+/* !! may be called with core in reset */
-+static void
-+_dma_detach(dma_info_t *di)
-+{
-+	if (di == NULL)
-+		return;
-+
-+	DMA_TRACE(("%s: dma_detach\n", di->name));
-+
-+	/* shouldn't be here if descriptors are unreclaimed */
-+	ASSERT(di->txin == di->txout);
-+	ASSERT(di->rxin == di->rxout);
-+
-+	/* free dma descriptor rings */
-+	if (di->txd32)
-+		DMA_FREE_CONSISTENT(di->osh, ((int8*)di->txd32 - di->txdalign),
-+		                    di->txdalloc, (di->txdpa - di->txdalign), &di->tx_dmah);
-+	if (di->rxd32)
-+		DMA_FREE_CONSISTENT(di->osh, ((int8*)di->rxd32 - di->rxdalign),
-+		                    di->rxdalloc, (di->rxdpa - di->rxdalign), &di->rx_dmah);
-+
-+	/* free packet pointer vectors */
-+	if (di->txp)
-+		MFREE(di->osh, (void *)di->txp, (di->ntxd * sizeof(void *)));
-+	if (di->rxp)
-+		MFREE(di->osh, (void *)di->rxp, (di->nrxd * sizeof(void *)));
-+
-+	/* free tx packet DMA handles */
-+	if (di->txp_dmah)
-+		MFREE(di->osh, (void *)di->txp_dmah, di->ntxd * sizeof(osldma_t **));
-+
-+	/* free rx packet DMA handles */
-+	if (di->rxp_dmah)
-+		MFREE(di->osh, (void *)di->rxp_dmah, di->nrxd * sizeof(osldma_t **));
-+
-+	/* free our private info structure */
-+	MFREE(di->osh, (void *)di, sizeof(dma_info_t));
-+
-+}
-+
-+/* return TRUE if this dma engine supports DmaExtendedAddrChanges, otherwise FALSE */
-+static bool
-+_dma_isaddrext(dma_info_t *di)
-+{
-+	if (di->d32txregs)
-+		return (_dma32_addrext(di->osh, di->d32txregs));
-+	else if (di->d32rxregs)
-+		return (_dma32_addrext(di->osh, di->d32rxregs));
-+	return FALSE;
-+}
-+
-+/* initialize descriptor table base address */
-+static void
-+_dma_ddtable_init(dma_info_t *di, uint direction, ulong pa)
-+{
-+	if ((di->ddoffsetlow != SB_PCI_DMA) || !(pa & PCI32ADDR_HIGH)) {
-+		if (direction == DMA_TX)
-+			W_REG(di->osh, &di->d32txregs->addr, (pa + di->ddoffsetlow));
-+		else
-+			W_REG(di->osh, &di->d32rxregs->addr, (pa + di->ddoffsetlow));
-+	} else {
-+		/* dma32 address extension */
-+		uint32 ae;
-+		ASSERT(di->addrext);
-+
-+		/* shift the high bit(s) from pa to ae */
-+		ae = (pa & PCI32ADDR_HIGH) >> PCI32ADDR_HIGH_SHIFT;
-+		pa &= ~PCI32ADDR_HIGH;
-+
-+		if (direction == DMA_TX) {
-+			W_REG(di->osh, &di->d32txregs->addr, (pa + di->ddoffsetlow));
-+			SET_REG(di->osh, &di->d32txregs->control, XC_AE, ae <<XC_AE_SHIFT);
-+		} else {
-+			W_REG(di->osh, &di->d32rxregs->addr, (pa + di->ddoffsetlow));
-+			SET_REG(di->osh, &di->d32rxregs->control, RC_AE, ae <<RC_AE_SHIFT);
-+		}
-+	}
-+}
-+
-+static void
-+_dma_fifoloopbackenable(dma_info_t *di)
-+{
-+	DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name));
-+	OR_REG(di->osh, &di->d32txregs->control, XC_LE);
-+}
-+
-+static void
-+_dma_rxinit(dma_info_t *di)
-+{
-+	DMA_TRACE(("%s: dma_rxinit\n", di->name));
-+
-+	if (di->nrxd == 0)
-+		return;
-+
-+	di->rxin = di->rxout = 0;
-+
-+	/* clear rx descriptor ring */
-+	BZERO_SM((void *)di->rxd32, (di->nrxd * sizeof(dma32dd_t)));
-+	_dma_rxenable(di);
-+	_dma_ddtable_init(di, DMA_RX, di->rxdpa);
-+}
-+
-+static void
-+_dma_rxenable(dma_info_t *di)
-+{
-+	DMA_TRACE(("%s: dma_rxenable\n", di->name));
-+
-+	W_REG(di->osh, &di->d32rxregs->control, ((di->rxoffset << RC_RO_SHIFT) | RC_RE));
-+}
-+
-+/* !! rx entry routine, returns a pointer to the next frame received,
-+ * or NULL if there are no more
-+ */
-+static void *
-+_dma_rx(dma_info_t *di)
-+{
-+	void *p;
-+	uint len;
-+	int skiplen = 0;
-+
-+	while ((p = _dma_getnextrxp(di, FALSE))) {
-+		/* skip giant packets which span multiple rx descriptors */
-+		if (skiplen > 0) {
-+			skiplen -= di->rxbufsize;
-+			if (skiplen < 0)
-+				skiplen = 0;
-+			PKTFREE(di->osh, p, FALSE);
-+			continue;
-+		}
-+
-+		len = ltoh16(*(uint16*)(PKTDATA(di->osh, p)));
-+		DMA_TRACE(("%s: dma_rx len %d\n", di->name, len));
-+
-+		/* bad frame length check */
-+		if (len > (di->rxbufsize - di->rxoffset)) {
-+			DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len));
-+			if (len > 0)
-+				skiplen = len - (di->rxbufsize - di->rxoffset);
-+			PKTFREE(di->osh, p, FALSE);
-+			di->hnddma.rxgiants++;
-+			continue;
-+		}
-+
-+		/* set actual length */
-+		PKTSETLEN(di->osh, p, (di->rxoffset + len));
-+
-+		break;
-+	}
-+
-+	return (p);
-+}
-+
-+/* post receive buffers */
-+static void
-+_dma_rxfill(dma_info_t *di)
-+{
-+	void *p;
-+	uint rxin, rxout;
-+	uint32 flags = 0;
-+	uint n;
-+	uint i;
-+	uint32 pa;
-+	uint extra_offset = 0;
-+
-+	/*
-+	 * Determine how many receive buffers we're lacking
-+	 * from the full complement, allocate, initialize,
-+	 * and post them, then update the chip rx lastdscr.
-+	 */
-+
-+	rxin = di->rxin;
-+	rxout = di->rxout;
-+
-+	n = di->nrxpost - NRXDACTIVE(rxin, rxout);
-+
-+	DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n));
-+
-+	if (di->rxbufsize > BCMEXTRAHDROOM)
-+		extra_offset = BCMEXTRAHDROOM;
-+
-+	for (i = 0; i < n; i++) {
-+		/* the di->rxbufsize doesn't include the extra headroom, we need to add it to the
-+		   size to be allocated
-+		*/
-+		if ((p = PKTGET(di->osh, di->rxbufsize + extra_offset,
-+		                FALSE)) == NULL) {
-+			DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name));
-+			di->hnddma.rxnobuf++;
-+			break;
-+		}
-+		/* reserve an extra headroom, if applicable */
-+		if (extra_offset)
-+			PKTPULL(di->osh, p, extra_offset);
-+
-+		/* Do a cached write instead of uncached write since DMA_MAP
-+		 * will flush the cache.
-+		 */
-+		*(uint32*)(PKTDATA(di->osh, p)) = 0;
-+
-+		pa = (uint32) DMA_MAP(di->osh, PKTDATA(di->osh, p),
-+		                      di->rxbufsize, DMA_RX, p);
-+
-+		ASSERT(ISALIGNED(pa, 4));
-+
-+		/* save the free packet pointer */
-+		ASSERT(di->rxp[rxout] == NULL);
-+		di->rxp[rxout] = p;
-+
-+		/* reset flags for each descriptor */
-+		flags = 0;
-+		if (rxout == (di->nrxd - 1))
-+			flags = CTRL_EOT;
-+		dma32_dd_upd(di, di->rxd32, pa, rxout, &flags, di->rxbufsize);
-+		rxout = NEXTRXD(rxout);
-+	}
-+
-+	di->rxout = rxout;
-+
-+	/* update the chip lastdscr pointer */
-+	W_REG(di->osh, &di->d32rxregs->ptr, I2B(rxout, dma32dd_t));
-+}
-+
-+/* like getnexttxp but no reclaim */
-+static void *
-+_dma_peeknexttxp(dma_info_t *di)
-+{
-+	uint end, i;
-+
-+	if (di->ntxd == 0)
-+		return (NULL);
-+
-+	end = B2I(R_REG(di->osh, &di->d32txregs->status) & XS_CD_MASK, dma32dd_t);
-+
-+	for (i = di->txin; i != end; i = NEXTTXD(i))
-+		if (di->txp[i])
-+			return (di->txp[i]);
-+
-+	return (NULL);
-+}
-+
-+static void
-+_dma_rxreclaim(dma_info_t *di)
-+{
-+	void *p;
-+
-+	/* "unused local" warning suppression for OSLs that
-+	 * define PKTFREE() without using the di->osh arg
-+	 */
-+	di = di;
-+
-+	DMA_TRACE(("%s: dma_rxreclaim\n", di->name));
-+
-+	while ((p = _dma_getnextrxp(di, TRUE)))
-+		PKTFREE(di->osh, p, FALSE);
-+}
-+
-+static void *
-+_dma_getnextrxp(dma_info_t *di, bool forceall)
-+{
-+	if (di->nrxd == 0)
-+		return (NULL);
-+
-+	return dma32_getnextrxp(di, forceall);
-+}
-+
-+static void
-+_dma_txblock(dma_info_t *di)
-+{
-+	di->hnddma.txavail = 0;
-+}
-+
-+static void
-+_dma_txunblock(dma_info_t *di)
-+{
-+	di->hnddma.txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
-+}
-+
-+static uint
-+_dma_txactive(dma_info_t *di)
-+{
-+	return (NTXDACTIVE(di->txin, di->txout));
-+}
-+
-+static void
-+_dma_counterreset(dma_info_t *di)
-+{
-+	/* reset all software counter */
-+	di->hnddma.rxgiants = 0;
-+	di->hnddma.rxnobuf = 0;
-+	di->hnddma.txnobuf = 0;
-+}
-+
-+/* get the address of the var in order to change later */
-+static uintptr
-+_dma_getvar(dma_info_t *di, char *name)
-+{
-+	if (!strcmp(name, "&txavail"))
-+		return ((uintptr) &(di->hnddma.txavail));
-+	else {
-+		ASSERT(0);
-+	}
-+	return (0);
-+}
-+
-+void
-+dma_txpioloopback(osl_t *osh, dma32regs_t *regs)
-+{
-+	OR_REG(osh, &regs->control, XC_LE);
-+}
-+
-+
-+
-+/* 32 bits DMA functions */
-+static void
-+dma32_txinit(dma_info_t *di)
-+{
-+	DMA_TRACE(("%s: dma_txinit\n", di->name));
-+
-+	if (di->ntxd == 0)
-+		return;
-+
-+	di->txin = di->txout = 0;
-+	di->hnddma.txavail = di->ntxd - 1;
-+
-+	/* clear tx descriptor ring */
-+	BZERO_SM((void *)di->txd32, (di->ntxd * sizeof(dma32dd_t)));
-+	W_REG(di->osh, &di->d32txregs->control, XC_XE);
-+	_dma_ddtable_init(di, DMA_TX, di->txdpa);
-+}
-+
-+static bool
-+dma32_txenabled(dma_info_t *di)
-+{
-+	uint32 xc;
-+
-+	/* If the chip is dead, it is not enabled :-) */
-+	xc = R_REG(di->osh, &di->d32txregs->control);
-+	return ((xc != 0xffffffff) && (xc & XC_XE));
-+}
-+
-+static void
-+dma32_txsuspend(dma_info_t *di)
-+{
-+	DMA_TRACE(("%s: dma_txsuspend\n", di->name));
-+
-+	if (di->ntxd == 0)
-+		return;
-+
-+	OR_REG(di->osh, &di->d32txregs->control, XC_SE);
-+}
-+
-+static void
-+dma32_txresume(dma_info_t *di)
-+{
-+	DMA_TRACE(("%s: dma_txresume\n", di->name));
-+
-+	if (di->ntxd == 0)
-+		return;
-+
-+	AND_REG(di->osh, &di->d32txregs->control, ~XC_SE);
-+}
-+
-+static bool
-+dma32_txsuspended(dma_info_t *di)
-+{
-+	return (di->ntxd == 0) || ((R_REG(di->osh, &di->d32txregs->control) & XC_SE) == XC_SE);
-+}
-+
-+static void
-+dma32_txreclaim(dma_info_t *di, bool forceall)
-+{
-+	void *p;
-+
-+	DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : ""));
-+
-+	while ((p = dma32_getnexttxp(di, forceall)))
-+		PKTFREE(di->osh, p, TRUE);
-+}
-+
-+static bool
-+dma32_txstopped(dma_info_t *di)
-+{
-+	return ((R_REG(di->osh, &di->d32txregs->status) & XS_XS_MASK) == XS_XS_STOPPED);
-+}
-+
-+static bool
-+dma32_rxstopped(dma_info_t *di)
-+{
-+	return ((R_REG(di->osh, &di->d32rxregs->status) & RS_RS_MASK) == RS_RS_STOPPED);
-+}
-+
-+static bool
-+dma32_alloc(dma_info_t *di, uint direction)
-+{
-+	uint size;
-+	uint ddlen;
-+	void *va;
-+
-+	ddlen = sizeof(dma32dd_t);
-+
-+	size = (direction == DMA_TX) ? (di->ntxd * ddlen) : (di->nrxd * ddlen);
-+
-+	if (!ISALIGNED(DMA_CONSISTENT_ALIGN, D32RINGALIGN))
-+		size += D32RINGALIGN;
-+
-+
-+	if (direction == DMA_TX) {
-+		if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->txdpa, &di->tx_dmah)) == NULL) {
-+			DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(ntxd) failed\n",
-+			           di->name));
-+			return FALSE;
-+		}
-+
-+		di->txd32 = (dma32dd_t *) ROUNDUP((uintptr)va, D32RINGALIGN);
-+		di->txdalign = (uint)((int8*)di->txd32 - (int8*)va);
-+		di->txdpa += di->txdalign;
-+		di->txdalloc = size;
-+		ASSERT(ISALIGNED((uintptr)di->txd32, D32RINGALIGN));
-+	} else {
-+		if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->rxdpa, &di->rx_dmah)) == NULL) {
-+			DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(nrxd) failed\n",
-+			           di->name));
-+			return FALSE;
-+		}
-+		di->rxd32 = (dma32dd_t *) ROUNDUP((uintptr)va, D32RINGALIGN);
-+		di->rxdalign = (uint)((int8*)di->rxd32 - (int8*)va);
-+		di->rxdpa += di->rxdalign;
-+		di->rxdalloc = size;
-+		ASSERT(ISALIGNED((uintptr)di->rxd32, D32RINGALIGN));
-+	}
-+
-+	return TRUE;
-+}
-+
-+static bool
-+dma32_txreset(dma_info_t *di)
-+{
-+	uint32 status;
-+
-+	if (di->ntxd == 0)
-+		return TRUE;
-+
-+	/* suspend tx DMA first */
-+	W_REG(di->osh, &di->d32txregs->control, XC_SE);
-+	SPINWAIT(((status = (R_REG(di->osh, &di->d32txregs->status) & XS_XS_MASK))
-+		 != XS_XS_DISABLED) &&
-+		 (status != XS_XS_IDLE) &&
-+		 (status != XS_XS_STOPPED),
-+		 (10000));
-+
-+	W_REG(di->osh, &di->d32txregs->control, 0);
-+	SPINWAIT(((status = (R_REG(di->osh,
-+	         &di->d32txregs->status) & XS_XS_MASK)) != XS_XS_DISABLED),
-+	         10000);
-+
-+	/* wait for the last transaction to complete */
-+	OSL_DELAY(300);
-+
-+	return (status == XS_XS_DISABLED);
-+}
-+
-+static bool
-+dma32_rxidle(dma_info_t *di)
-+{
-+	DMA_TRACE(("%s: dma_rxidle\n", di->name));
-+
-+	if (di->nrxd == 0)
-+		return TRUE;
-+
-+	return ((R_REG(di->osh, &di->d32rxregs->status) & RS_CD_MASK) ==
-+	        R_REG(di->osh, &di->d32rxregs->ptr));
-+}
-+
-+static bool
-+dma32_rxreset(dma_info_t *di)
-+{
-+	uint32 status;
-+
-+	if (di->nrxd == 0)
-+		return TRUE;
-+
-+	W_REG(di->osh, &di->d32rxregs->control, 0);
-+	SPINWAIT(((status = (R_REG(di->osh,
-+	         &di->d32rxregs->status) & RS_RS_MASK)) != RS_RS_DISABLED),
-+	         10000);
-+
-+	return (status == RS_RS_DISABLED);
-+}
-+
-+static bool
-+dma32_rxenabled(dma_info_t *di)
-+{
-+	uint32 rc;
-+
-+	rc = R_REG(di->osh, &di->d32rxregs->control);
-+	return ((rc != 0xffffffff) && (rc & RC_RE));
-+}
-+
-+static bool
-+dma32_txsuspendedidle(dma_info_t *di)
-+{
-+	if (di->ntxd == 0)
-+		return TRUE;
-+
-+	if (!(R_REG(di->osh, &di->d32txregs->control) & XC_SE))
-+		return 0;
-+
-+	if ((R_REG(di->osh, &di->d32txregs->status) & XS_XS_MASK) != XS_XS_IDLE)
-+		return 0;
-+
-+	OSL_DELAY(2);
-+	return ((R_REG(di->osh, &di->d32txregs->status) & XS_XS_MASK) == XS_XS_IDLE);
-+}
-+
-+/* !! tx entry routine
-+ * supports full 32bit dma engine buffer addressing so
-+ * dma buffers can cross 4 Kbyte page boundaries.
-+ */
-+static int
-+dma32_txfast(dma_info_t *di, void *p0, bool commit)
-+{
-+	void *p, *next;
-+	uchar *data;
-+	uint len;
-+	uint txout;
-+	uint32 flags = 0;
-+	uint32 pa;
-+
-+	DMA_TRACE(("%s: dma_txfast\n", di->name));
-+
-+	txout = di->txout;
-+
-+	/*
-+	 * Walk the chain of packet buffers
-+	 * allocating and initializing transmit descriptor entries.
-+	 */
-+	for (p = p0; p; p = next) {
-+		data = PKTDATA(di->osh, p);
-+		len = PKTLEN(di->osh, p);
-+		next = PKTNEXT(di->osh, p);
-+
-+		/* return nonzero if out of tx descriptors */
-+		if (NEXTTXD(txout) == di->txin)
-+			goto outoftxd;
-+
-+		if (len == 0)
-+			continue;
-+
-+		/* get physical address of buffer start */
-+		pa = (uint32) DMA_MAP(di->osh, data, len, DMA_TX, p);
-+
-+		flags = 0;
-+		if (p == p0)
-+			flags |= CTRL_SOF;
-+		if (next == NULL)
-+			flags |= (CTRL_IOC | CTRL_EOF);
-+		if (txout == (di->ntxd - 1))
-+			flags |= CTRL_EOT;
-+
-+		dma32_dd_upd(di, di->txd32, pa, txout, &flags, len);
-+		ASSERT(di->txp[txout] == NULL);
-+
-+		txout = NEXTTXD(txout);
-+	}
-+
-+	/* if last txd eof not set, fix it */
-+	if (!(flags & CTRL_EOF))
-+		W_SM(&di->txd32[PREVTXD(txout)].ctrl, BUS_SWAP32(flags | CTRL_IOC | CTRL_EOF));
-+
-+	/* save the packet */
-+	di->txp[PREVTXD(txout)] = p0;
-+
-+	/* bump the tx descriptor index */
-+	di->txout = txout;
-+
-+	/* kick the chip */
-+	if (commit)
-+		W_REG(di->osh, &di->d32txregs->ptr, I2B(txout, dma32dd_t));
-+
-+	/* tx flow control */
-+	di->hnddma.txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
-+
-+	return (0);
-+
-+outoftxd:
-+	DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name));
-+	PKTFREE(di->osh, p0, TRUE);
-+	di->hnddma.txavail = 0;
-+	di->hnddma.txnobuf++;
-+	return (-1);
-+}
-+
-+/*
-+ * Reclaim next completed txd (txds if using chained buffers) and
-+ * return associated packet.
-+ * If 'force' is true, reclaim txd(s) and return associated packet
-+ * regardless of the value of the hardware "curr" pointer.
-+ */
-+static void *
-+dma32_getnexttxp(dma_info_t *di, bool forceall)
-+{
-+	uint start, end, i;
-+	void *txp;
-+
-+	DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : ""));
-+
-+	if (di->ntxd == 0)
-+		return (NULL);
-+
-+	txp = NULL;
-+
-+	start = di->txin;
-+	if (forceall)
-+		end = di->txout;
-+	else
-+		end = B2I(R_REG(di->osh, &di->d32txregs->status) & XS_CD_MASK, dma32dd_t);
-+
-+	if ((start == 0) && (end > di->txout))
-+		goto bogus;
-+
-+	for (i = start; i != end && !txp; i = NEXTTXD(i)) {
-+		DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->txd32[i].addr)) - di->dataoffsetlow),
-+		          (BUS_SWAP32(R_SM(&di->txd32[i].ctrl)) & CTRL_BC_MASK),
-+		          DMA_TX, di->txp[i]);
-+
-+		W_SM(&di->txd32[i].addr, 0xdeadbeef);
-+		txp = di->txp[i];
-+		di->txp[i] = NULL;
-+	}
-+
-+	di->txin = i;
-+
-+	/* tx flow control */
-+	di->hnddma.txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
-+
-+	return (txp);
-+
-+bogus:
-+/*
-+	DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n",
-+		start, end, di->txout, forceall));
-+*/
-+	return (NULL);
-+}
-+
-+static void *
-+dma32_getnextrxp(dma_info_t *di, bool forceall)
-+{
-+	uint i;
-+	void *rxp;
-+
-+	/* if forcing, dma engine must be disabled */
-+	ASSERT(!forceall || !dma32_rxenabled(di));
-+
-+	i = di->rxin;
-+
-+	/* return if no packets posted */
-+	if (i == di->rxout)
-+		return (NULL);
-+
-+	/* ignore curr if forceall */
-+	if (!forceall && (i == B2I(R_REG(di->osh, &di->d32rxregs->status) & RS_CD_MASK, dma32dd_t)))
-+		return (NULL);
-+
-+	/* get the packet pointer that corresponds to the rx descriptor */
-+	rxp = di->rxp[i];
-+	ASSERT(rxp);
-+	di->rxp[i] = NULL;
-+
-+	/* clear this packet from the descriptor ring */
-+	DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->rxd32[i].addr)) - di->dataoffsetlow),
-+	          di->rxbufsize, DMA_RX, rxp);
-+
-+	W_SM(&di->rxd32[i].addr, 0xdeadbeef);
-+
-+	di->rxin = NEXTRXD(i);
-+
-+	return (rxp);
-+}
-+
-+/*
-+ * Rotate all active tx dma ring entries "forward" by (ActiveDescriptor - txin).
-+ */
-+static void
-+dma32_txrotate(dma_info_t *di)
-+{
-+	uint ad;
-+	uint nactive;
-+	uint rot;
-+	uint old, new;
-+	uint32 w;
-+	uint first, last;
-+
-+	ASSERT(dma32_txsuspendedidle(di));
-+
-+	nactive = _dma_txactive(di);
-+	ad = B2I(((R_REG(di->osh, &di->d32txregs->status) & XS_AD_MASK) >> XS_AD_SHIFT), dma32dd_t);
-+	rot = TXD(ad - di->txin);
-+
-+	ASSERT(rot < di->ntxd);
-+
-+	/* full-ring case is a lot harder - don't worry about this */
-+	if (rot >= (di->ntxd - nactive)) {
-+		DMA_ERROR(("%s: dma_txrotate: ring full - punt\n", di->name));
-+		return;
-+	}
-+
-+	first = di->txin;
-+	last = PREVTXD(di->txout);
-+
-+	/* move entries starting at last and moving backwards to first */
-+	for (old = last; old != PREVTXD(first); old = PREVTXD(old)) {
-+		new = TXD(old + rot);
-+
-+		/*
-+		 * Move the tx dma descriptor.
-+		 * EOT is set only in the last entry in the ring.
-+		 */
-+		w = BUS_SWAP32(R_SM(&di->txd32[old].ctrl)) & ~CTRL_EOT;
-+		if (new == (di->ntxd - 1))
-+			w |= CTRL_EOT;
-+		W_SM(&di->txd32[new].ctrl, BUS_SWAP32(w));
-+		W_SM(&di->txd32[new].addr, R_SM(&di->txd32[old].addr));
-+
-+		/* zap the old tx dma descriptor address field */
-+		W_SM(&di->txd32[old].addr, BUS_SWAP32(0xdeadbeef));
-+
-+		/* move the corresponding txp[] entry */
-+		ASSERT(di->txp[new] == NULL);
-+		di->txp[new] = di->txp[old];
-+		di->txp[old] = NULL;
-+	}
-+
-+	/* update txin and txout */
-+	di->txin = ad;
-+	di->txout = TXD(di->txout + rot);
-+	di->hnddma.txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
-+
-+	/* kick the chip */
-+	W_REG(di->osh, &di->d32txregs->ptr, I2B(di->txout, dma32dd_t));
-+}
-+
-+
-+uint
-+dma_addrwidth(sb_t *sbh, void *dmaregs)
-+{
-+	dma32regs_t *dma32regs;
-+	osl_t *osh;
-+
-+	osh = sb_osh(sbh);
-+
-+	/* Start checking for 32-bit / 30-bit addressing */
-+	dma32regs = (dma32regs_t *)dmaregs;
-+
-+	/* For System Backplane, PCIE bus or addrext feature, 32-bits ok */
-+	if ((BUSTYPE(sbh->bustype) == SB_BUS) ||
-+	    ((BUSTYPE(sbh->bustype) == PCI_BUS) && sbh->buscoretype == SB_PCIE) ||
-+	    (_dma32_addrext(osh, dma32regs)))
-+		return (DMADDRWIDTH_32);
-+
-+	/* Fallthru */
-+	return (DMADDRWIDTH_30);
-+}
-diff -urN linux.old/drivers/net/wl/hnddma.h linux.dev/drivers/net/wl/hnddma.h
---- linux.old/drivers/net/wl/hnddma.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/wl/hnddma.h	2006-04-28 02:20:44.000000000 +0200
-@@ -0,0 +1,156 @@
-+/*
-+ * Generic Broadcom Home Networking Division (HND) DMA engine SW interface
-+ * This supports the following chips: BCM42xx, 44xx, 47xx .
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: hnddma.h,v 1.1.1.13 2006/04/08 06:13:39 honor Exp $
-+ */
-+
-+#ifndef	_hnddma_h_
-+#define	_hnddma_h_
-+
-+typedef const struct hnddma_pub hnddma_t;
-+
-+/* dma function type */
-+typedef void (*di_detach_t)(hnddma_t *dmah);
-+typedef bool (*di_txreset_t)(hnddma_t *dmah);
-+typedef bool (*di_rxreset_t)(hnddma_t *dmah);
-+typedef bool (*di_rxidle_t)(hnddma_t *dmah);
-+typedef void (*di_txinit_t)(hnddma_t *dmah);
-+typedef bool (*di_txenabled_t)(hnddma_t *dmah);
-+typedef void (*di_rxinit_t)(hnddma_t *dmah);
-+typedef void (*di_txsuspend_t)(hnddma_t *dmah);
-+typedef void (*di_txresume_t)(hnddma_t *dmah);
-+typedef bool (*di_txsuspended_t)(hnddma_t *dmah);
-+typedef bool (*di_txsuspendedidle_t)(hnddma_t *dmah);
-+typedef int (*di_txfast_t)(hnddma_t *dmah, void *p, bool commit);
-+typedef void (*di_fifoloopbackenable_t)(hnddma_t *dmah);
-+typedef bool  (*di_txstopped_t)(hnddma_t *dmah);
-+typedef bool  (*di_rxstopped_t)(hnddma_t *dmah);
-+typedef bool  (*di_rxenable_t)(hnddma_t *dmah);
-+typedef bool  (*di_rxenabled_t)(hnddma_t *dmah);
-+typedef void* (*di_rx_t)(hnddma_t *dmah);
-+typedef void (*di_rxfill_t)(hnddma_t *dmah);
-+typedef void (*di_txreclaim_t)(hnddma_t *dmah, bool forceall);
-+typedef void (*di_rxreclaim_t)(hnddma_t *dmah);
-+typedef	uintptr	(*di_getvar_t)(hnddma_t *dmah, char *name);
-+typedef void* (*di_getnexttxp_t)(hnddma_t *dmah, bool forceall);
-+typedef void* (*di_getnextrxp_t)(hnddma_t *dmah, bool forceall);
-+typedef void* (*di_peeknexttxp_t)(hnddma_t *dmah);
-+typedef void (*di_txblock_t)(hnddma_t *dmah);
-+typedef void (*di_txunblock_t)(hnddma_t *dmah);
-+typedef uint (*di_txactive_t)(hnddma_t *dmah);
-+typedef void (*di_txrotate_t)(hnddma_t *dmah);
-+typedef void (*di_counterreset_t)(hnddma_t *dmah);
-+typedef char* (*di_dump_t)(hnddma_t *dmah, struct bcmstrbuf *b, bool dumpring);
-+typedef char* (*di_dumptx_t)(hnddma_t *dmah, struct bcmstrbuf *b, bool dumpring);
-+typedef char* (*di_dumprx_t)(hnddma_t *dmah, struct bcmstrbuf *b, bool dumpring);
-+
-+/* dma opsvec */
-+typedef struct di_fcn_s {
-+	di_detach_t		detach;
-+	di_txinit_t             txinit;
-+	di_txreset_t		txreset;
-+	di_txenabled_t          txenabled;
-+	di_txsuspend_t          txsuspend;
-+	di_txresume_t           txresume;
-+	di_txsuspended_t        txsuspended;
-+	di_txsuspendedidle_t    txsuspendedidle;
-+	di_txfast_t             txfast;
-+	di_txstopped_t		txstopped;
-+	di_txreclaim_t          txreclaim;
-+	di_getnexttxp_t         getnexttxp;
-+	di_peeknexttxp_t        peeknexttxp;
-+	di_txblock_t            txblock;
-+	di_txunblock_t          txunblock;
-+	di_txactive_t           txactive;
-+	di_txrotate_t           txrotate;
-+
-+	di_rxinit_t             rxinit;
-+	di_rxreset_t            rxreset;
-+	di_rxidle_t             rxidle;
-+	di_rxstopped_t		rxstopped;
-+	di_rxenable_t		rxenable;
-+	di_rxenabled_t		rxenabled;
-+	di_rx_t                 rx;
-+	di_rxfill_t             rxfill;
-+	di_rxreclaim_t          rxreclaim;
-+	di_getnextrxp_t         getnextrxp;
-+
-+	di_fifoloopbackenable_t fifoloopbackenable;
-+	di_getvar_t             d_getvar;
-+	di_counterreset_t       counterreset;
-+	di_dump_t		dump;
-+	di_dumptx_t		dumptx;
-+	di_dumprx_t		dumprx;
-+	uint			endnum;
-+} di_fcn_t;
-+
-+/*
-+ * Exported data structure (read-only)
-+ */
-+/* export structure */
-+struct hnddma_pub {
-+	di_fcn_t	di_fn;		/* DMA function pointers */
-+	uint		txavail;	/* # free tx descriptors */
-+
-+	/* rx error counters */
-+	uint		rxgiants;	/* rx giant frames */
-+	uint		rxnobuf;	/* rx out of dma descriptors */
-+	/* tx error counters */
-+	uint		txnobuf;	/* tx out of dma descriptors */
-+};
-+
-+
-+extern hnddma_t * dma_attach(osl_t *osh, char *name, sb_t *sbh, void *dmaregstx, void *dmaregsrx,
-+                             uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset,
-+                             uint *msg_level);
-+#define dma_detach(di)			((di)->di_fn.detach(di))
-+#define dma_txreset(di)			((di)->di_fn.txreset(di))
-+#define dma_rxreset(di)			((di)->di_fn.rxreset(di))
-+#define dma_rxidle(di)			((di)->di_fn.rxidle(di))
-+#define dma_txinit(di)                  ((di)->di_fn.txinit(di))
-+#define dma_txenabled(di)               ((di)->di_fn.txenabled(di))
-+#define dma_rxinit(di)                  ((di)->di_fn.rxinit(di))
-+#define dma_txsuspend(di)               ((di)->di_fn.txsuspend(di))
-+#define dma_txresume(di)                ((di)->di_fn.txresume(di))
-+#define dma_txsuspended(di)             ((di)->di_fn.txsuspended(di))
-+#define dma_txsuspendedidle(di)         ((di)->di_fn.txsuspendedidle(di))
-+#define dma_txfast(di, p, commit)	((di)->di_fn.txfast(di, p, commit))
-+#define dma_fifoloopbackenable(di)      ((di)->di_fn.fifoloopbackenable(di))
-+#define dma_txstopped(di)               ((di)->di_fn.txstopped(di))
-+#define dma_rxstopped(di)               ((di)->di_fn.rxstopped(di))
-+#define dma_rxenable(di)                ((di)->di_fn.rxenable(di))
-+#define dma_rxenabled(di)               ((di)->di_fn.rxenabled(di))
-+#define dma_rx(di)                      ((di)->di_fn.rx(di))
-+#define dma_rxfill(di)                  ((di)->di_fn.rxfill(di))
-+#define dma_txreclaim(di, forceall)	((di)->di_fn.txreclaim(di, forceall))
-+#define dma_rxreclaim(di)               ((di)->di_fn.rxreclaim(di))
-+#define dma_getvar(di, name)		((di)->di_fn.d_getvar(di, name))
-+#define dma_getnexttxp(di, forceall)    ((di)->di_fn.getnexttxp(di, forceall))
-+#define dma_getnextrxp(di, forceall)    ((di)->di_fn.getnextrxp(di, forceall))
-+#define dma_peeknexttxp(di)             ((di)->di_fn.peeknexttxp(di))
-+#define dma_txblock(di)                 ((di)->di_fn.txblock(di))
-+#define dma_txunblock(di)               ((di)->di_fn.txunblock(di))
-+#define dma_txactive(di)                ((di)->di_fn.txactive(di))
-+#define dma_txrotate(di)                ((di)->di_fn.txrotate(di))
-+#define dma_counterreset(di)            ((di)->di_fn.counterreset(di))
-+
-+#define DMA_DUMP_SIZE 2048
-+/* return addresswidth allowed
-+ * This needs to be done after SB attach but before dma attach.
-+ * SB attach provides ability to probe backplane and dma core capabilities
-+ * This info is needed by DMA_ALLOC_CONSISTENT in dma attach
-+ */
-+extern uint dma_addrwidth(sb_t *sbh, void *dmaregs);
-+
-+/* pio helpers */
-+void dma_txpioloopback(osl_t *osh, dma32regs_t *);
-+
-+#endif	/* _hnddma_h_ */
-diff -urN linux.old/drivers/net/wl/linux_osl.c linux.dev/drivers/net/wl/linux_osl.c
---- linux.old/drivers/net/wl/linux_osl.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/wl/linux_osl.c	2006-04-28 02:29:46.000000000 +0200
-@@ -0,0 +1,269 @@
-+/*
-+ * Linux OS Independent Layer
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: linux_osl.c,v 1.1.1.14 2006/04/08 06:13:39 honor Exp $
-+ */
-+
-+#define LINUX_OSL
-+
-+#include <typedefs.h>
-+#include <bcmendian.h>
-+#include <linux/module.h>
-+#include <linuxver.h>
-+#include <bcmdefs.h>
-+#include <osl.h>
-+#include "linux_osl.h"
-+#include <bcmutils.h>
-+#include <linux/delay.h>
-+#ifdef mips
-+#include <asm/paccess.h>
-+#endif /* mips */
-+#include <pcicfg.h>
-+
-+#define PCI_CFG_RETRY 		10	
-+
-+#define OS_HANDLE_MAGIC		0x1234abcd	/* Magic # to recognise osh */
-+#define BCM_MEM_FILENAME_LEN 	24		/* Mem. filename length */
-+
-+typedef struct bcm_mem_link {
-+	struct bcm_mem_link *prev;
-+	struct bcm_mem_link *next;
-+	uint	size;
-+	int	line;
-+	char	file[BCM_MEM_FILENAME_LEN];
-+} bcm_mem_link_t;
-+
-+static int16 linuxbcmerrormap[] =  \
-+{	0, 			/* 0 */
-+	-EINVAL,		/* BCME_ERROR */
-+	-EINVAL,		/* BCME_BADARG */
-+	-EINVAL,		/* BCME_BADOPTION */
-+	-EINVAL,		/* BCME_NOTUP */
-+	-EINVAL,		/* BCME_NOTDOWN */
-+	-EINVAL,		/* BCME_NOTAP */
-+	-EINVAL,		/* BCME_NOTSTA */
-+	-EINVAL,		/* BCME_BADKEYIDX */
-+	-EINVAL,		/* BCME_RADIOOFF */
-+	-EINVAL,		/* BCME_NOTBANDLOCKED */
-+	-EINVAL, 		/* BCME_NOCLK */
-+	-EINVAL, 		/* BCME_BADRATESET */
-+	-EINVAL, 		/* BCME_BADBAND */
-+	-E2BIG,			/* BCME_BUFTOOSHORT */
-+	-E2BIG,			/* BCME_BUFTOOLONG */
-+	-EBUSY, 		/* BCME_BUSY */
-+	-EINVAL, 		/* BCME_NOTASSOCIATED */
-+	-EINVAL, 		/* BCME_BADSSIDLEN */
-+	-EINVAL, 		/* BCME_OUTOFRANGECHAN */
-+	-EINVAL, 		/* BCME_BADCHAN */
-+	-EFAULT, 		/* BCME_BADADDR */
-+	-ENOMEM, 		/* BCME_NORESOURCE */
-+	-EOPNOTSUPP,		/* BCME_UNSUPPORTED */
-+	-EMSGSIZE,		/* BCME_BADLENGTH */
-+	-EINVAL,		/* BCME_NOTREADY */
-+	-EPERM,			/* BCME_NOTPERMITTED */
-+	-ENOMEM, 		/* BCME_NOMEM */
-+	-EINVAL, 		/* BCME_ASSOCIATED */
-+	-ERANGE, 		/* BCME_RANGE */
-+	-EINVAL, 		/* BCME_NOTFOUND */
-+	-EINVAL, 		/* BCME_WME_NOT_ENABLED */
-+	-EINVAL, 		/* BCME_TSPEC_NOTFOUND */
-+	-EINVAL, 		/* BCME_ACM_NOTSUPPORTED */
-+	-EINVAL,		/* BCME_NOT_WME_ASSOCIATION */
-+	-EIO,			/* BCME_SDIO_ERROR */
-+	-ENODEV			/* BCME_DONGLE_DOWN */
-+};
-+
-+/* translate bcmerrors into linux errors */
-+int
-+osl_error(int bcmerror)
-+{
-+	int abs_bcmerror;
-+	int array_size = ARRAYSIZE(linuxbcmerrormap);
-+
-+	abs_bcmerror = ABS(bcmerror);
-+
-+	if (bcmerror > 0)
-+		abs_bcmerror = 0;
-+
-+	else if (abs_bcmerror >= array_size)
-+		abs_bcmerror = BCME_ERROR;
-+
-+	return linuxbcmerrormap[abs_bcmerror];
-+}
-+
-+osl_t *
-+osl_attach(void *pdev, bool pkttag)
-+{
-+	osl_t *osh;
-+
-+	osh = kmalloc(sizeof(osl_t), GFP_ATOMIC);
-+	ASSERT(osh);
-+
-+	bzero(osh, sizeof(osl_t));
-+
-+	/*
-+	 * check the cases where
-+	 * 1.Error code Added to bcmerror table, but forgot to add it to the OS
-+	 * dependent error code
-+	 * 2. Error code is added to the bcmerror table, but forgot to add the
-+	 * corresponding errorstring(dummy call to bcmerrorstr)
-+	 */
-+	bcmerrorstr(0);
-+	ASSERT(ABS(BCME_LAST) == (ARRAYSIZE(linuxbcmerrormap) - 1));
-+
-+	osh->magic = OS_HANDLE_MAGIC;
-+	osh->malloced = 0;
-+	osh->failed = 0;
-+	osh->dbgmem_list = NULL;
-+	osh->pdev = pdev;
-+	osh->pub.pkttag = pkttag;
-+
-+	return osh;
-+}
-+
-+void
-+osl_detach(osl_t *osh)
-+{
-+	if (osh == NULL)
-+		return;
-+
-+	ASSERT(osh->magic == OS_HANDLE_MAGIC);
-+	kfree(osh);
-+}
-+
-+/* Return a new packet. zero out pkttag */
-+void*
-+osl_pktget(osl_t *osh, uint len, bool send)
-+{
-+	struct sk_buff *skb;
-+
-+	if ((skb = dev_alloc_skb(len))) {
-+		skb_put(skb, len);
-+		skb->priority = 0;
-+
-+#ifdef BCMDBG_PKT
-+	pktlist_add(&(osh->pktlist), (void *) skb);
-+#endif  /* BCMDBG_PKT */
-+
-+		osh->pub.pktalloced++;
-+	}
-+
-+	return ((void*) skb);
-+}
-+
-+/* Free the driver packet. Free the tag if present */
-+void
-+osl_pktfree(osl_t *osh, void *p)
-+{
-+	struct sk_buff *skb, *nskb;
-+
-+	skb = (struct sk_buff*) p;
-+
-+	/* perversion: we use skb->next to chain multi-skb packets */
-+	while (skb) {
-+		nskb = skb->next;
-+		skb->next = NULL;
-+
-+#ifdef BCMDBG_PKT
-+		pktlist_remove(&(osh->pktlist), (void *) skb);
-+#endif  /* BCMDBG_PKT */
-+
-+		if (skb->destructor) {
-+			/* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists
-+			 */
-+			dev_kfree_skb_any(skb);
-+		} else {
-+			/* can free immediately (even in_irq()) if destructor does not exist */
-+			dev_kfree_skb(skb);
-+		}
-+
-+		osh->pub.pktalloced--;
-+
-+		skb = nskb;
-+	}
-+}
-+
-+void*
-+osl_malloc(osl_t *osh, uint size)
-+{
-+	void *addr;
-+
-+	/* only ASSERT if osh is defined */
-+	if (osh)
-+		ASSERT(osh->magic == OS_HANDLE_MAGIC);
-+
-+	if ((addr = kmalloc(size, GFP_ATOMIC)) == NULL) {
-+		if (osh)
-+			osh->failed++;
-+		return (NULL);
-+	}
-+	if (osh)
-+		osh->malloced += size;
-+
-+	return (addr);
-+}
-+
-+void
-+osl_mfree(osl_t *osh, void *addr, uint size)
-+{
-+	if (osh) {
-+		ASSERT(osh->magic == OS_HANDLE_MAGIC);
-+		osh->malloced -= size;
-+	}
-+	kfree(addr);
-+}
-+
-+uint
-+osl_malloced(osl_t *osh)
-+{
-+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
-+	return (osh->malloced);
-+}
-+
-+uint osl_malloc_failed(osl_t *osh)
-+{
-+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
-+	return (osh->failed);
-+}
-+
-+#undef osl_delay
-+void
-+osl_delay(uint usec)
-+{
-+	OSL_DELAY(usec);
-+}
-+
-+/* Clone a packet.
-+ * The pkttag contents are NOT cloned.
-+ */
-+void *
-+osl_pktdup(osl_t *osh, void *skb)
-+{
-+	void * p;
-+
-+	if ((p = skb_clone((struct sk_buff*)skb, GFP_ATOMIC)) == NULL)
-+		return NULL;
-+
-+	/* skb_clone copies skb->cb.. we don't want that */
-+	if (osh->pub.pkttag)
-+		bzero((void*)((struct sk_buff *)p)->cb, OSL_PKTTAG_SZ);
-+
-+	/* Increment the packet counter */
-+	osh->pub.pktalloced++;
-+	return (p);
-+}
-+
-+uint
-+osl_pktalloced(osl_t *osh)
-+{
-+	return (osh->pub.pktalloced);
-+}
-+
-diff -urN linux.old/drivers/net/wl/linux_osl.h linux.dev/drivers/net/wl/linux_osl.h
---- linux.old/drivers/net/wl/linux_osl.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/wl/linux_osl.h	2006-05-02 17:44:29.000000000 +0200
-@@ -0,0 +1,171 @@
-+/*
-+ * Linux OS Independent Layer
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: linux_osl.h,v 1.1.1.13 2006/04/08 06:13:39 honor Exp $
-+ */
-+
-+#ifndef _linux_osl_h_
-+#define _linux_osl_h_
-+
-+#include <typedefs.h>
-+#include <linuxver.h>
-+#include <osl.h>
-+
-+#define OSL_PKTTAG_SZ     32 /* Size of PktTag */
-+
-+/* osl handle type forward declaration */
-+typedef struct osl_dmainfo osldma_t;
-+
-+/* OSL initialization */
-+extern osl_t *osl_attach(void *pdev, bool pkttag);
-+extern void osl_detach(osl_t *osh);
-+
-+/* host/bus architecture-specific byte swap */
-+#define BUS_SWAP32(v)		(v)
-+#define	MALLOC_FAILED(osh)	osl_malloc_failed((osh))
-+
-+extern void *osl_malloc(osl_t *osh, uint size);
-+extern void osl_mfree(osl_t *osh, void *addr, uint size);
-+extern uint osl_malloced(osl_t *osh);
-+extern uint osl_malloc_failed(osl_t *osh);
-+
-+/* API for DMA addressing capability */
-+#define	DMA_MAP(osh, va, size, direction, p) \
-+	osl_dma_map((osh), (va), (size), (direction))
-+#define	DMA_UNMAP(osh, pa, size, direction, p) \
-+	osl_dma_unmap((osh), (pa), (size), (direction))
-+static inline uint
-+osl_dma_map(void *osh, void *va, uint size, int direction)
-+{
-+	int dir;
-+	struct pci_dev *dev;
-+
-+	dev = (osh == NULL ? NULL : ((osl_t *)osh)->pdev);
-+	dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
-+	return (pci_map_single(dev, va, size, dir));
-+}
-+
-+static inline void
-+osl_dma_unmap(void *osh, uint pa, uint size, int direction)
-+{
-+	int dir;
-+	struct pci_dev *dev;
-+
-+	dev = (osh == NULL ? NULL : ((osl_t *)osh)->pdev);
-+	dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
-+	pci_unmap_single(dev, (uint32)pa, size, dir);
-+}
-+
-+#define OSL_DMADDRWIDTH(osh, addrwidth) do {} while (0)
-+#define	DMA_CONSISTENT_ALIGN	PAGE_SIZE
-+#define	DMA_ALLOC_CONSISTENT(osh, size, pap, dmah) \
-+	osl_dma_alloc_consistent((osh), (size), (pap))
-+#define	DMA_FREE_CONSISTENT(osh, va, size, pa, dmah) \
-+	osl_dma_free_consistent((osh), (void*)(va), (size), (pa))
-+static inline void*
-+osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap)
-+{
-+	return (pci_alloc_consistent(osh->pdev, size, (dma_addr_t*)pap));
-+}
-+
-+static inline void
-+osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa)
-+{
-+	pci_free_consistent(osh->pdev, size, va, (dma_addr_t)pa);
-+}
-+
-+
-+/* register access macros */
-+#if defined(BCMJTAG)
-+#include <bcmjtag.h>
-+#define	R_REG(osh, r)	bcmjtag_read(NULL, (uint32)(r), sizeof(*(r)))
-+#define	W_REG(osh, r, v)	bcmjtag_write(NULL, (uint32)(r), (uint32)(v), sizeof(*(r)))
-+#endif /* defined(BCMSDIO) */
-+
-+/* packet primitives */
-+#define	PKTGET(osh, len, send)		osl_pktget((osh), (len), (send))
-+#define	PKTFREE(osh, skb, send)		osl_pktfree((osh), (skb))
-+#define	PKTDATA(osh, skb)		(((struct sk_buff*)(skb))->data)
-+#define	PKTLEN(osh, skb)		(((struct sk_buff*)(skb))->len)
-+#define PKTHEADROOM(osh, skb)		(PKTDATA(osh, skb)-(((struct sk_buff*)(skb))->head))
-+#define PKTTAILROOM(osh, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail))
-+#define	PKTNEXT(osh, skb)		(((struct sk_buff*)(skb))->next)
-+#define	PKTSETNEXT(osh, skb, x)		(((struct sk_buff*)(skb))->next = (struct sk_buff*)(x))
-+#define	PKTSETLEN(osh, skb, len)	__skb_trim((struct sk_buff*)(skb), (len))
-+#define	PKTPUSH(osh, skb, bytes)	skb_push((struct sk_buff*)(skb), (bytes))
-+#define	PKTPULL(osh, skb, bytes)	skb_pull((struct sk_buff*)(skb), (bytes))
-+#define	PKTDUP(osh, skb)		osl_pktdup((osh), (skb))
-+#define	PKTTAG(skb)			((void*)(((struct sk_buff*)(skb))->cb))
-+#define PKTALLOCED(osh)			osl_pktalloced((osh))
-+#define PKTLIST_DUMP(osh, buf)
-+
-+/* Convert a native(OS) packet to driver packet.
-+ * In the process, native packet is destroyed, there is no copying
-+ * Also, a packettag is zeroed out
-+ */
-+static INLINE void *
-+osl_pkt_frmnative(struct osl_pubinfo *osh, struct sk_buff *skb)
-+{
-+	struct sk_buff *nskb;
-+
-+	if (osh->pkttag)
-+		bzero((void*)skb->cb, OSL_PKTTAG_SZ);
-+
-+	/* Increment the packet counter */
-+	for (nskb = skb; nskb; nskb = nskb->next) {
-+		osh->pktalloced++;
-+	}
-+
-+	return (void *)skb;
-+}
-+#define PKTFRMNATIVE(osh, skb)	osl_pkt_frmnative(((struct osl_pubinfo *)osh), \
-+							(struct sk_buff*)(skb))
-+
-+/* Convert a driver packet to native(OS) packet
-+ * In the process, packettag is zeroed out before sending up
-+ * IP code depends on skb->cb to be setup correctly with various options
-+ * In our case, that means it should be 0
-+ */
-+static INLINE struct sk_buff *
-+osl_pkt_tonative(struct osl_pubinfo *osh, void *pkt)
-+{
-+	struct sk_buff *nskb;
-+
-+	if (osh->pkttag)
-+		bzero(((struct sk_buff*)pkt)->cb, OSL_PKTTAG_SZ);
-+
-+	/* Decrement the packet counter */
-+	for (nskb = (struct sk_buff *)pkt; nskb; nskb = nskb->next) {
-+		osh->pktalloced--;
-+	}
-+
-+	return (struct sk_buff *)pkt;
-+}
-+#define PKTTONATIVE(osh, pkt)		osl_pkt_tonative((struct osl_pubinfo *)(osh), (pkt))
-+
-+#define	PKTLINK(skb)			(((struct sk_buff*)(skb))->prev)
-+#define	PKTSETLINK(skb, x)		(((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x))
-+#define	PKTPRIO(skb)			(((struct sk_buff*)(skb))->priority)
-+#define	PKTSETPRIO(skb, x)		(((struct sk_buff*)(skb))->priority = (x))
-+#define PKTSHARED(skb)                  (((struct sk_buff*)(skb))->cloned)
-+
-+extern void *osl_pktget(osl_t *osh, uint len, bool send);
-+extern void osl_pktfree(osl_t *osh, void *skb);
-+extern void *osl_pktdup(osl_t *osh, void *skb);
-+extern uint osl_pktalloced(osl_t *osh);
-+
-+#define OSL_ERROR(bcmerror)	osl_error(bcmerror)
-+extern int osl_error(int bcmerror);
-+
-+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
-+#define	PKTBUFSZ	2048   /* largest reasonable packet buffer, driver uses for ethernet MTU */
-+
-+#endif	/* _linux_osl_h_ */
-diff -urN linux.old/drivers/net/wl/pktq.h linux.dev/drivers/net/wl/pktq.h
---- linux.old/drivers/net/wl/pktq.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/wl/pktq.h	2006-04-28 02:11:49.000000000 +0200
-@@ -0,0 +1,97 @@
-+/*
-+ * Misc useful os-independent macros and functions.
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: bcmutils.h,v 1.1.1.16 2006/04/08 06:13:39 honor Exp $
-+ */
-+
-+#ifndef	_pktq_h_
-+#define	_pktq_h_
-+#include <osl.h>
-+
-+/* osl multi-precedence packet queue */
-+
-+#define PKTQ_LEN_DEFAULT        128	/* Max 128 packets */
-+#define PKTQ_MAX_PREC           16	/* Maximum precedence levels */
-+
-+struct pktq {
-+	struct pktq_prec {
-+		void *head;     /* first packet to dequeue */
-+		void *tail;     /* last packet to dequeue */
-+		uint16 len;     /* number of queued packets */
-+		uint16 max;     /* maximum number of queued packets */
-+	} q[PKTQ_MAX_PREC];
-+	uint16 num_prec;        /* number of precedences in use */
-+	uint16 hi_prec;         /* rapid dequeue hint (>= highest non-empty prec) */
-+	uint16 max;             /* total max packets */
-+	uint16 len;             /* total number of packets */
-+};
-+
-+#define PKTQ_PREC_ITER(pq, prec)        for (prec = (pq)->num_prec - 1; prec >= 0; prec--)
-+
-+/* forward definition of ether_addr structure used by some function prototypes */
-+
-+struct ether_addr;
-+
-+/* operations on a specific precedence in packet queue */
-+
-+#define pktq_psetmax(pq, prec, _max)    ((pq)->q[prec].max = (_max))
-+#define pktq_plen(pq, prec)             ((pq)->q[prec].len)
-+#define pktq_pavail(pq, prec)           ((pq)->q[prec].max - (pq)->q[prec].len)
-+#define pktq_pfull(pq, prec)            ((pq)->q[prec].len >= (pq)->q[prec].max)
-+#define pktq_pempty(pq, prec)           ((pq)->q[prec].len == 0)
-+
-+#define pktq_ppeek(pq, prec)            ((pq)->q[prec].head)
-+#define pktq_ppeek_tail(pq, prec)       ((pq)->q[prec].tail)
-+
-+extern void *pktq_penq(struct pktq *pq, int prec, void *p);
-+extern void *pktq_penq_head(struct pktq *pq, int prec, void *p);
-+extern void *pktq_pdeq(struct pktq *pq, int prec);
-+extern void *pktq_pdeq_tail(struct pktq *pq, int prec);
-+/* Empty the queue at particular precedence level */
-+extern void pktq_pflush(osl_t *osh, struct pktq *pq, int prec, bool dir);
-+/* Remove a specified packet from its queue */
-+extern bool pktq_pdel(struct pktq *pq, void *p, int prec);
-+
-+/* operations on a set of precedences in packet queue */
-+
-+extern int pktq_mlen(struct pktq *pq, uint prec_bmp);
-+extern void *pktq_mdeq(struct pktq *pq, uint prec_bmp, int *prec_out);
-+
-+/* operations on packet queue as a whole */
-+
-+#define pktq_len(pq)                    ((int)(pq)->len)
-+#define pktq_max(pq)                    ((int)(pq)->max)
-+#define pktq_avail(pq)                  ((int)((pq)->max - (pq)->len))
-+#define pktq_full(pq)                   ((pq)->len >= (pq)->max)
-+#define pktq_empty(pq)                  ((pq)->len == 0)
-+
-+/* operations for single precedence queues */
-+#define pktenq(pq, p)		pktq_penq((pq), 0, (p))
-+#define pktenq_head(pq, p)	pktq_penq_head((pq), 0, (p))
-+#define pktdeq(pq)		pktq_pdeq((pq), 0)
-+#define pktdeq_tail(pq)		pktq_pdeq_tail((pq), 0)
-+
-+extern void pktq_init(struct pktq *pq, int num_prec, int max_len);
-+/* prec_out may be NULL if caller is not interested in return value */
-+extern void *pktq_deq(struct pktq *pq, int *prec_out);
-+extern void *pktq_deq_tail(struct pktq *pq, int *prec_out);
-+extern void *pktq_peek(struct pktq *pq, int *prec_out);
-+extern void *pktq_peek_tail(struct pktq *pq, int *prec_out);
-+extern void pktq_flush(osl_t *osh, struct pktq *pq, bool dir); /* Empty the entire queue */
-+
-+/* externs */
-+/* packet */
-+extern uint pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf);
-+extern uint pkttotlen(osl_t *osh, void *p);
-+extern void *pktlast(osl_t *osh, void *p);
-+
-+extern void pktsetprio(void *pkt, bool update_vtag);
-+
-+#endif	/* _pktq_h_ */
-diff -urN linux.old/drivers/net/wl/sbhnddma.h linux.dev/drivers/net/wl/sbhnddma.h
---- linux.old/drivers/net/wl/sbhnddma.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/wl/sbhnddma.h	2006-04-28 02:20:47.000000000 +0200
-@@ -0,0 +1,284 @@
-+/*
-+ * Generic Broadcom Home Networking Division (HND) DMA engine HW interface
-+ * This supports the following chips: BCM42xx, 44xx, 47xx .
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbhnddma.h,v 1.1.1.2 2006/02/27 03:43:16 honor Exp $
-+ */
-+
-+#ifndef	_sbhnddma_h_
-+#define	_sbhnddma_h_
-+
-+/* DMA structure:
-+ *  support two DMA engines: 32 bits address or 64 bit addressing
-+ *  basic DMA register set is per channel(transmit or receive)
-+ *  a pair of channels is defined for convenience
-+ */
-+
-+
-+/* 32 bits addressing */
-+
-+/* dma registers per channel(xmt or rcv) */
-+typedef volatile struct {
-+	uint32	control;		/* enable, et al */
-+	uint32	addr;			/* descriptor ring base address (4K aligned) */
-+	uint32	ptr;			/* last descriptor posted to chip */
-+	uint32	status;			/* current active descriptor, et al */
-+} dma32regs_t;
-+
-+typedef volatile struct {
-+	dma32regs_t	xmt;		/* dma tx channel */
-+	dma32regs_t	rcv;		/* dma rx channel */
-+} dma32regp_t;
-+
-+typedef volatile struct {	/* diag access */
-+	uint32	fifoaddr;		/* diag address */
-+	uint32	fifodatalow;		/* low 32bits of data */
-+	uint32	fifodatahigh;		/* high 32bits of data */
-+	uint32	pad;			/* reserved */
-+} dma32diag_t;
-+
-+/*
-+ * DMA Descriptor
-+ * Descriptors are only read by the hardware, never written back.
-+ */
-+typedef volatile struct {
-+	uint32	ctrl;		/* misc control bits & bufcount */
-+	uint32	addr;		/* data buffer address */
-+} dma32dd_t;
-+
-+/*
-+ * Each descriptor ring must be 4096byte aligned, and fit within a single 4096byte page.
-+ */
-+#define	D32MAXRINGSZ	4096
-+#define	D32RINGALIGN	4096
-+#define	D32MAXDD	(D32MAXRINGSZ / sizeof (dma32dd_t))
-+
-+/* transmit channel control */
-+#define	XC_XE		((uint32)1 << 0)	/* transmit enable */
-+#define	XC_SE		((uint32)1 << 1)	/* transmit suspend request */
-+#define	XC_LE		((uint32)1 << 2)	/* loopback enable */
-+#define	XC_FL		((uint32)1 << 4)	/* flush request */
-+#define	XC_AE		((uint32)3 << 16)	/* address extension bits */
-+#define	XC_AE_SHIFT	16
-+
-+/* transmit descriptor table pointer */
-+#define	XP_LD_MASK	0xfff			/* last valid descriptor */
-+
-+/* transmit channel status */
-+#define	XS_CD_MASK	0x0fff			/* current descriptor pointer */
-+#define	XS_XS_MASK	0xf000			/* transmit state */
-+#define	XS_XS_SHIFT	12
-+#define	XS_XS_DISABLED	0x0000			/* disabled */
-+#define	XS_XS_ACTIVE	0x1000			/* active */
-+#define	XS_XS_IDLE	0x2000			/* idle wait */
-+#define	XS_XS_STOPPED	0x3000			/* stopped */
-+#define	XS_XS_SUSP	0x4000			/* suspend pending */
-+#define	XS_XE_MASK	0xf0000			/* transmit errors */
-+#define	XS_XE_SHIFT	16
-+#define	XS_XE_NOERR	0x00000			/* no error */
-+#define	XS_XE_DPE	0x10000			/* descriptor protocol error */
-+#define	XS_XE_DFU	0x20000			/* data fifo underrun */
-+#define	XS_XE_BEBR	0x30000			/* bus error on buffer read */
-+#define	XS_XE_BEDA	0x40000			/* bus error on descriptor access */
-+#define	XS_AD_MASK	0xfff00000		/* active descriptor */
-+#define	XS_AD_SHIFT	20
-+
-+/* receive channel control */
-+#define	RC_RE		((uint32)1 << 0)	/* receive enable */
-+#define	RC_RO_MASK	0xfe			/* receive frame offset */
-+#define	RC_RO_SHIFT	1
-+#define	RC_FM		((uint32)1 << 8)	/* direct fifo receive (pio) mode */
-+#define	RC_AE		((uint32)3 << 16)	/* address extension bits */
-+#define	RC_AE_SHIFT	16
-+
-+/* receive descriptor table pointer */
-+#define	RP_LD_MASK	0xfff			/* last valid descriptor */
-+
-+/* receive channel status */
-+#define	RS_CD_MASK	0x0fff			/* current descriptor pointer */
-+#define	RS_RS_MASK	0xf000			/* receive state */
-+#define	RS_RS_SHIFT	12
-+#define	RS_RS_DISABLED	0x0000			/* disabled */
-+#define	RS_RS_ACTIVE	0x1000			/* active */
-+#define	RS_RS_IDLE	0x2000			/* idle wait */
-+#define	RS_RS_STOPPED	0x3000			/* reserved */
-+#define	RS_RE_MASK	0xf0000			/* receive errors */
-+#define	RS_RE_SHIFT	16
-+#define	RS_RE_NOERR	0x00000			/* no error */
-+#define	RS_RE_DPE	0x10000			/* descriptor protocol error */
-+#define	RS_RE_DFO	0x20000			/* data fifo overflow */
-+#define	RS_RE_BEBW	0x30000			/* bus error on buffer write */
-+#define	RS_RE_BEDA	0x40000			/* bus error on descriptor access */
-+#define	RS_AD_MASK	0xfff00000		/* active descriptor */
-+#define	RS_AD_SHIFT	20
-+
-+/* fifoaddr */
-+#define	FA_OFF_MASK	0xffff			/* offset */
-+#define	FA_SEL_MASK	0xf0000			/* select */
-+#define	FA_SEL_SHIFT	16
-+#define	FA_SEL_XDD	0x00000			/* transmit dma data */
-+#define	FA_SEL_XDP	0x10000			/* transmit dma pointers */
-+#define	FA_SEL_RDD	0x40000			/* receive dma data */
-+#define	FA_SEL_RDP	0x50000			/* receive dma pointers */
-+#define	FA_SEL_XFD	0x80000			/* transmit fifo data */
-+#define	FA_SEL_XFP	0x90000			/* transmit fifo pointers */
-+#define	FA_SEL_RFD	0xc0000			/* receive fifo data */
-+#define	FA_SEL_RFP	0xd0000			/* receive fifo pointers */
-+#define	FA_SEL_RSD	0xe0000			/* receive frame status data */
-+#define	FA_SEL_RSP	0xf0000			/* receive frame status pointers */
-+
-+/* descriptor control flags */
-+#define	CTRL_BC_MASK	0x1fff			/* buffer byte count */
-+#define	CTRL_AE		((uint32)3 << 16)	/* address extension bits */
-+#define	CTRL_AE_SHIFT	16
-+#define	CTRL_EOT	((uint32)1 << 28)	/* end of descriptor table */
-+#define	CTRL_IOC	((uint32)1 << 29)	/* interrupt on completion */
-+#define	CTRL_EOF	((uint32)1 << 30)	/* end of frame */
-+#define	CTRL_SOF	((uint32)1 << 31)	/* start of frame */
-+
-+/* control flags in the range [27:20] are core-specific and not defined here */
-+#define	CTRL_CORE_MASK	0x0ff00000
-+
-+/* 64 bits addressing */
-+
-+/* dma registers per channel(xmt or rcv) */
-+typedef volatile struct {
-+	uint32	control;		/* enable, et al */
-+	uint32	ptr;			/* last descriptor posted to chip */
-+	uint32	addrlow;		/* descriptor ring base address low 32-bits (8K aligned) */
-+	uint32	addrhigh;		/* descriptor ring base address bits 63:32 (8K aligned) */
-+	uint32	status0;		/* current descriptor, xmt state */
-+	uint32	status1;		/* active descriptor, xmt error */
-+} dma64regs_t;
-+
-+typedef volatile struct {
-+	dma64regs_t	tx;		/* dma64 tx channel */
-+	dma64regs_t	rx;		/* dma64 rx channel */
-+} dma64regp_t;
-+
-+typedef volatile struct {		/* diag access */
-+	uint32	fifoaddr;		/* diag address */
-+	uint32	fifodatalow;		/* low 32bits of data */
-+	uint32	fifodatahigh;		/* high 32bits of data */
-+	uint32	pad;			/* reserved */
-+} dma64diag_t;
-+
-+/*
-+ * DMA Descriptor
-+ * Descriptors are only read by the hardware, never written back.
-+ */
-+typedef volatile struct {
-+	uint32	ctrl1;		/* misc control bits & bufcount */
-+	uint32	ctrl2;		/* buffer count and address extension */
-+	uint32	addrlow;	/* memory address of the date buffer, bits 31:0 */
-+	uint32	addrhigh;	/* memory address of the date buffer, bits 63:32 */
-+} dma64dd_t;
-+
-+/*
-+ * Each descriptor ring must be 8kB aligned, and fit within a contiguous 8kB physical addresss.
-+ */
-+#define	D64MAXRINGSZ	8192
-+#define	D64RINGALIGN	8192
-+#define	D64MAXDD	(D64MAXRINGSZ / sizeof (dma64dd_t))
-+
-+/* transmit channel control */
-+#define	D64_XC_XE		0x00000001	/* transmit enable */
-+#define	D64_XC_SE		0x00000002	/* transmit suspend request */
-+#define	D64_XC_LE		0x00000004	/* loopback enable */
-+#define	D64_XC_FL		0x00000010	/* flush request */
-+#define	D64_XC_AE		0x00030000	/* address extension bits */
-+#define	D64_XC_AE_SHIFT		16
-+
-+/* transmit descriptor table pointer */
-+#define	D64_XP_LD_MASK		0x00000fff	/* last valid descriptor */
-+
-+/* transmit channel status */
-+#define	D64_XS0_CD_MASK		0x00001fff	/* current descriptor pointer */
-+#define	D64_XS0_XS_MASK		0xf0000000     	/* transmit state */
-+#define	D64_XS0_XS_SHIFT		28
-+#define	D64_XS0_XS_DISABLED	0x00000000	/* disabled */
-+#define	D64_XS0_XS_ACTIVE	0x10000000	/* active */
-+#define	D64_XS0_XS_IDLE		0x20000000	/* idle wait */
-+#define	D64_XS0_XS_STOPPED	0x30000000	/* stopped */
-+#define	D64_XS0_XS_SUSP		0x40000000	/* suspend pending */
-+
-+#define	D64_XS1_AD_MASK		0x0001ffff	/* active descriptor */
-+#define	D64_XS1_XE_MASK		0xf0000000     	/* transmit errors */
-+#define	D64_XS1_XE_SHIFT		28
-+#define	D64_XS1_XE_NOERR	0x00000000	/* no error */
-+#define	D64_XS1_XE_DPE		0x10000000	/* descriptor protocol error */
-+#define	D64_XS1_XE_DFU		0x20000000	/* data fifo underrun */
-+#define	D64_XS1_XE_DTE		0x30000000	/* data transfer error */
-+#define	D64_XS1_XE_DESRE	0x40000000	/* descriptor read error */
-+#define	D64_XS1_XE_COREE	0x50000000	/* core error */
-+
-+/* receive channel control */
-+#define	D64_RC_RE		0x00000001	/* receive enable */
-+#define	D64_RC_RO_MASK		0x000000fe	/* receive frame offset */
-+#define	D64_RC_RO_SHIFT		1
-+#define	D64_RC_FM		0x00000100	/* direct fifo receive (pio) mode */
-+#define	D64_RC_AE		0x00030000	/* address extension bits */
-+#define	D64_RC_AE_SHIFT		16
-+
-+/* receive descriptor table pointer */
-+#define	D64_RP_LD_MASK		0x00000fff	/* last valid descriptor */
-+
-+/* receive channel status */
-+#define	D64_RS0_CD_MASK		0x00001fff	/* current descriptor pointer */
-+#define	D64_RS0_RS_MASK		0xf0000000     	/* receive state */
-+#define	D64_RS0_RS_SHIFT		28
-+#define	D64_RS0_RS_DISABLED	0x00000000	/* disabled */
-+#define	D64_RS0_RS_ACTIVE	0x10000000	/* active */
-+#define	D64_RS0_RS_IDLE		0x20000000	/* idle wait */
-+#define	D64_RS0_RS_STOPPED	0x30000000	/* stopped */
-+#define	D64_RS0_RS_SUSP		0x40000000	/* suspend pending */
-+
-+#define	D64_RS1_AD_MASK		0x0001ffff	/* active descriptor */
-+#define	D64_RS1_RE_MASK		0xf0000000     	/* receive errors */
-+#define	D64_RS1_RE_SHIFT		28
-+#define	D64_RS1_RE_NOERR	0x00000000	/* no error */
-+#define	D64_RS1_RE_DPO		0x10000000	/* descriptor protocol error */
-+#define	D64_RS1_RE_DFU		0x20000000	/* data fifo overflow */
-+#define	D64_RS1_RE_DTE		0x30000000	/* data transfer error */
-+#define	D64_RS1_RE_DESRE	0x40000000	/* descriptor read error */
-+#define	D64_RS1_RE_COREE	0x50000000	/* core error */
-+
-+/* fifoaddr */
-+#define	D64_FA_OFF_MASK		0xffff		/* offset */
-+#define	D64_FA_SEL_MASK		0xf0000		/* select */
-+#define	D64_FA_SEL_SHIFT	16
-+#define	D64_FA_SEL_XDD		0x00000		/* transmit dma data */
-+#define	D64_FA_SEL_XDP		0x10000		/* transmit dma pointers */
-+#define	D64_FA_SEL_RDD		0x40000		/* receive dma data */
-+#define	D64_FA_SEL_RDP		0x50000		/* receive dma pointers */
-+#define	D64_FA_SEL_XFD		0x80000		/* transmit fifo data */
-+#define	D64_FA_SEL_XFP		0x90000		/* transmit fifo pointers */
-+#define	D64_FA_SEL_RFD		0xc0000		/* receive fifo data */
-+#define	D64_FA_SEL_RFP		0xd0000		/* receive fifo pointers */
-+#define	D64_FA_SEL_RSD		0xe0000		/* receive frame status data */
-+#define	D64_FA_SEL_RSP		0xf0000		/* receive frame status pointers */
-+
-+/* descriptor control flags 1 */
-+#define	D64_CTRL1_EOT		((uint32)1 << 28)	/* end of descriptor table */
-+#define	D64_CTRL1_IOC		((uint32)1 << 29)	/* interrupt on completion */
-+#define	D64_CTRL1_EOF		((uint32)1 << 30)	/* end of frame */
-+#define	D64_CTRL1_SOF		((uint32)1 << 31)	/* start of frame */
-+
-+/* descriptor control flags 2 */
-+#define	D64_CTRL2_BC_MASK	0x00007fff	/* buffer byte count mask */
-+#define	D64_CTRL2_AE		0x00030000	/* address extension bits */
-+#define	D64_CTRL2_AE_SHIFT	16
-+
-+/* control flags in the range [27:20] are core-specific and not defined here */
-+#define	D64_CTRL_CORE_MASK	0x0ff00000
-+
-+
-+#endif	/* _sbhnddma_h_ */
-diff -urN linux.old/drivers/parport/Config.in linux.dev/drivers/parport/Config.in
---- linux.old/drivers/parport/Config.in	2006-04-27 18:04:38.000000000 +0200
-+++ linux.dev/drivers/parport/Config.in	2006-04-27 19:24:19.000000000 +0200
-@@ -11,6 +11,7 @@
- tristate 'Parallel port support' CONFIG_PARPORT
- if [ "$CONFIG_PARPORT" != "n" ]; then
-    dep_tristate '  PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT
-+   dep_tristate '  Asus WL500g parallel port' CONFIG_PARPORT_SPLINK $CONFIG_PARPORT
-    if [ "$CONFIG_PARPORT_PC" != "n" -a "$CONFIG_SERIAL" != "n" ]; then
-       if [ "$CONFIG_SERIAL" = "m" ]; then
-          define_tristate CONFIG_PARPORT_PC_CML1 m
-diff -urN linux.old/drivers/parport/Makefile linux.dev/drivers/parport/Makefile
---- linux.old/drivers/parport/Makefile	2006-04-27 18:04:38.000000000 +0200
-+++ linux.dev/drivers/parport/Makefile	2006-04-27 19:24:19.000000000 +0200
-@@ -22,6 +22,7 @@
- 
- obj-$(CONFIG_PARPORT)		+= parport.o
- obj-$(CONFIG_PARPORT_PC)	+= parport_pc.o
-+obj-$(CONFIG_PARPORT_SPLINK)	+= parport_splink.o
- obj-$(CONFIG_PARPORT_PC_PCMCIA)	+= parport_cs.o
- obj-$(CONFIG_PARPORT_AMIGA)	+= parport_amiga.o
- obj-$(CONFIG_PARPORT_MFC3)	+= parport_mfc3.o
-diff -urN linux.old/drivers/parport/parport_splink.c linux.dev/drivers/parport/parport_splink.c
---- linux.old/drivers/parport/parport_splink.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/parport/parport_splink.c	2006-04-27 19:24:19.000000000 +0200
-@@ -0,0 +1,345 @@
-+/* Low-level parallel port routines for the ASUS WL-500g built-in port
-+ *
-+ * Author: Nuno Grilo <nuno.grilo@netcabo.pt>
-+ * Based on parport_pc source
-+ */
-+  
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/parport.h>
-+#include <linux/parport_pc.h>
-+
-+#define SPLINK_ADDRESS 0xBF800010
-+
-+#undef DEBUG
-+
-+#ifdef DEBUG
-+#define DPRINTK  printk
-+#else
-+#define DPRINTK(stuff...)
-+#endif
-+
-+
-+/* __parport_splink_frob_control differs from parport_splink_frob_control in that
-+ * it doesn't do any extra masking. */
-+static __inline__ unsigned char __parport_splink_frob_control (struct parport *p,
-+							   unsigned char mask,
-+							   unsigned char val)
-+{
-+	struct parport_pc_private *priv = p->physport->private_data;
-+	unsigned char *io = (unsigned char *) p->base;
-+	unsigned char ctr = priv->ctr;
-+#ifdef DEBUG_PARPORT
-+	printk (KERN_DEBUG
-+		"__parport_splink_frob_control(%02x,%02x): %02x -> %02x\n",
-+		mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
-+#endif
-+	ctr = (ctr & ~mask) ^ val;
-+	ctr &= priv->ctr_writable; /* only write writable bits. */
-+	*(io+2) = ctr;
-+	priv->ctr = ctr;	/* Update soft copy */
-+	return ctr;
-+}
-+
-+
-+
-+static void parport_splink_data_forward (struct parport *p)
-+{
-+	DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n");
-+	__parport_splink_frob_control (p, 0x20, 0);
-+}
-+
-+static void parport_splink_data_reverse (struct parport *p)
-+{
-+	DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n");
-+	__parport_splink_frob_control (p, 0x20, 0x20);
-+}
-+
-+/*
-+static void parport_splink_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	DPRINTK(KERN_DEBUG "parport_splink: IRQ handler called\n");
-+        parport_generic_irq(irq, (struct parport *) dev_id, regs);
-+}
-+*/
-+
-+static void parport_splink_enable_irq(struct parport *p)
-+{
-+	DPRINTK(KERN_DEBUG "parport_splink: parport_splink_enable_irq called\n");
-+	__parport_splink_frob_control (p, 0x10, 0x10);
-+}
-+
-+static void parport_splink_disable_irq(struct parport *p)
-+{
-+	DPRINTK(KERN_DEBUG "parport_splink: parport_splink_disable_irq called\n");
-+	__parport_splink_frob_control (p, 0x10, 0);
-+}
-+
-+static void parport_splink_init_state(struct pardevice *dev, struct parport_state *s)
-+{
-+	DPRINTK(KERN_DEBUG "parport_splink: parport_splink_init_state called\n");
-+	s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0);
-+	if (dev->irq_func &&
-+            dev->port->irq != PARPORT_IRQ_NONE)
-+                /* Set ackIntEn */
-+                s->u.pc.ctr |= 0x10;
-+}
-+
-+static void parport_splink_save_state(struct parport *p, struct parport_state *s)
-+{
-+	const struct parport_pc_private *priv = p->physport->private_data;
-+	DPRINTK(KERN_DEBUG "parport_splink: parport_splink_save_state called\n");
-+	s->u.pc.ctr = priv->ctr;
-+}
-+
-+static void parport_splink_restore_state(struct parport *p, struct parport_state *s)
-+{
-+	struct parport_pc_private *priv = p->physport->private_data;
-+	unsigned char *io = (unsigned char *) p->base;
-+	unsigned char ctr = s->u.pc.ctr;
-+
-+	DPRINTK(KERN_DEBUG "parport_splink: parport_splink_restore_state called\n");
-+        *(io+2) = ctr;
-+	priv->ctr = ctr;
-+}
-+
-+static void parport_splink_setup_interrupt(void) {
-+        return;
-+}
-+
-+static void parport_splink_write_data(struct parport *p, unsigned char d) {
-+	DPRINTK(KERN_DEBUG "parport_splink: write data called\n");
-+        unsigned char *io = (unsigned char *) p->base;
-+        *io = d;
-+}
-+
-+static unsigned char parport_splink_read_data(struct parport *p) {
-+	DPRINTK(KERN_DEBUG "parport_splink: read data called\n");
-+        unsigned char *io = (unsigned char *) p->base;
-+        return *io;
-+}
-+
-+static void parport_splink_write_control(struct parport *p, unsigned char d)
-+{
-+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
-+				  PARPORT_CONTROL_AUTOFD |
-+				  PARPORT_CONTROL_INIT |
-+				  PARPORT_CONTROL_SELECT);
-+
-+	DPRINTK(KERN_DEBUG "parport_splink: write control called\n");
-+	/* Take this out when drivers have adapted to the newer interface. */
-+	if (d & 0x20) {
-+		printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
-+			p->name, p->cad->name);
-+		parport_splink_data_reverse (p);
-+	}
-+
-+	__parport_splink_frob_control (p, wm, d & wm);
-+}
-+
-+static unsigned char parport_splink_read_control(struct parport *p)
-+{
-+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
-+				  PARPORT_CONTROL_AUTOFD |
-+				  PARPORT_CONTROL_INIT |
-+				  PARPORT_CONTROL_SELECT);
-+	DPRINTK(KERN_DEBUG "parport_splink: read control called\n");
-+	const struct parport_pc_private *priv = p->physport->private_data;
-+	return priv->ctr & wm; /* Use soft copy */
-+}
-+
-+static unsigned char parport_splink_frob_control (struct parport *p, unsigned char mask,
-+				       unsigned char val)
-+{
-+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
-+				  PARPORT_CONTROL_AUTOFD |
-+				  PARPORT_CONTROL_INIT |
-+				  PARPORT_CONTROL_SELECT);
-+
-+	DPRINTK(KERN_DEBUG "parport_splink: frob control called\n");
-+	/* Take this out when drivers have adapted to the newer interface. */
-+	if (mask & 0x20) {
-+		printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
-+			p->name, p->cad->name,
-+			(val & 0x20) ? "reverse" : "forward");
-+		if (val & 0x20)
-+			parport_splink_data_reverse (p);
-+		else
-+			parport_splink_data_forward (p);
-+	}
-+
-+	/* Restrict mask and val to control lines. */
-+	mask &= wm;
-+	val &= wm;
-+
-+	return __parport_splink_frob_control (p, mask, val);
-+}
-+
-+static unsigned char parport_splink_read_status(struct parport *p)
-+{
-+	DPRINTK(KERN_DEBUG "parport_splink: read status called\n");
-+        unsigned char *io = (unsigned char *) p->base;
-+        return *(io+1);
-+}
-+
-+static void parport_splink_inc_use_count(void)
-+{
-+#ifdef MODULE
-+	MOD_INC_USE_COUNT;
-+#endif
-+}
-+
-+static void parport_splink_dec_use_count(void)
-+{
-+#ifdef MODULE
-+	MOD_DEC_USE_COUNT;
-+#endif
-+}
-+
-+static struct parport_operations parport_splink_ops = 
-+{
-+	parport_splink_write_data,
-+	parport_splink_read_data,
-+
-+	parport_splink_write_control,
-+	parport_splink_read_control,
-+	parport_splink_frob_control,
-+
-+	parport_splink_read_status,
-+
-+	parport_splink_enable_irq,
-+	parport_splink_disable_irq,
-+
-+	parport_splink_data_forward,
-+	parport_splink_data_reverse,
-+
-+	parport_splink_init_state,
-+	parport_splink_save_state,
-+	parport_splink_restore_state,
-+
-+	parport_splink_inc_use_count,
-+	parport_splink_dec_use_count,
-+
-+	parport_ieee1284_epp_write_data,
-+	parport_ieee1284_epp_read_data,
-+	parport_ieee1284_epp_write_addr,
-+	parport_ieee1284_epp_read_addr,
-+
-+	parport_ieee1284_ecp_write_data,
-+	parport_ieee1284_ecp_read_data,
-+	parport_ieee1284_ecp_write_addr,
-+
-+	parport_ieee1284_write_compat,
-+	parport_ieee1284_read_nibble,
-+	parport_ieee1284_read_byte,
-+};
-+
-+/* --- Initialisation code -------------------------------- */
-+
-+static struct parport *parport_splink_probe_port (unsigned long int base)
-+{
-+	struct parport_pc_private *priv;
-+	struct parport_operations *ops;
-+	struct parport *p;
-+
-+	if (check_mem_region(base, 3)) {
-+		printk (KERN_DEBUG "parport (0x%lx): iomem region not available\n", base);
-+		return NULL;
-+	}
-+	priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL);
-+	if (!priv) {
-+		printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
-+		return NULL;
-+	}
-+	ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL);
-+	if (!ops) {
-+		printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
-+			base);
-+		kfree (priv);
-+		return NULL;
-+	}
-+	memcpy (ops, &parport_splink_ops, sizeof (struct parport_operations));
-+	priv->ctr = 0xc;
-+	priv->ctr_writable = 0xff;
-+
-+	if (!(p = parport_register_port(base, PARPORT_IRQ_NONE,
-+					PARPORT_DMA_NONE, ops))) {
-+		printk (KERN_DEBUG "parport (0x%lx): registration failed!\n",
-+			base);
-+		kfree (priv);
-+		kfree (ops);
-+		return NULL;
-+	}
-+
-+	p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
-+	p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
-+	p->private_data = priv;
-+
-+	parport_proc_register(p);
-+	request_mem_region (p->base, 3, p->name);
-+
-+	/* Done probing.  Now put the port into a sensible start-up state. */
-+	parport_splink_write_data(p, 0);
-+	parport_splink_data_forward (p);
-+
-+	/* Now that we've told the sharing engine about the port, and
-+	   found out its characteristics, let the high-level drivers
-+	   know about it. */
-+	parport_announce_port (p);
-+
-+	DPRINTK(KERN_DEBUG "parport (0x%lx): init ok!\n",
-+		base);
-+	return p;
-+}
-+
-+static void parport_splink_unregister_port(struct parport *p) {
-+	struct parport_pc_private *priv = p->private_data;
-+	struct parport_operations *ops = p->ops;
-+
-+        if (p->irq != PARPORT_IRQ_NONE)
-+		free_irq(p->irq, p);
-+	release_mem_region(p->base, 3);
-+        parport_proc_unregister(p);
-+        kfree (priv);
-+        parport_unregister_port(p);
-+        kfree (ops);
-+}
-+
-+
-+int parport_splink_init(void)
-+{	
-+        int ret;
-+        
-+	DPRINTK(KERN_DEBUG "parport_splink init called\n");
-+        parport_splink_setup_interrupt();
-+        ret = !parport_splink_probe_port(SPLINK_ADDRESS);
-+        
-+        return ret;
-+}
-+
-+void parport_splink_cleanup(void) {
-+        struct parport *p = parport_enumerate(), *tmp;
-+	DPRINTK(KERN_DEBUG "parport_splink cleanup called\n");
-+        if (p->size) {
-+                if (p->modes & PARPORT_MODE_PCSPP) {
-+                        while(p) {
-+                                tmp = p->next;
-+                                parport_splink_unregister_port(p);
-+                                p = tmp;
-+                        }
-+                }
-+        }
-+}
-+
-+MODULE_AUTHOR("Nuno Grilo <nuno.grilo@netcabo.pt>");
-+MODULE_DESCRIPTION("Parport Driver for ASUS WL-500g router builtin Port");
-+MODULE_SUPPORTED_DEVICE("ASUS WL-500g builtin Parallel Port");
-+MODULE_LICENSE("GPL");
-+
-+module_init(parport_splink_init)
-+module_exit(parport_splink_cleanup)
-+
-diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
---- linux.old/include/asm-mips/bootinfo.h	2006-04-27 18:04:38.000000000 +0200
-+++ linux.dev/include/asm-mips/bootinfo.h	2006-04-27 19:24:19.000000000 +0200
-@@ -37,6 +37,7 @@
- #define MACH_GROUP_HP_LJ       20 /* Hewlett Packard LaserJet               */
- #define MACH_GROUP_LASAT       21
- #define MACH_GROUP_TITAN       22 /* PMC-Sierra Titan 			    */
-+#define MACH_GROUP_BRCM		   23 /* Broadcom */
- 
- /*
-  * Valid machtype values for group unknown (low order halfword of mips_machtype)
-@@ -197,6 +198,15 @@
- #define MACH_TANBAC_TB0229	7	/* TANBAC TB0229 (VR4131DIMM) */
- 
- /*
-+ * Valid machtypes for group Broadcom
-+ */
-+#define MACH_BCM93725          0
-+#define MACH_BCM93725_VJ       1
-+#define MACH_BCM93730          2
-+#define MACH_BCM947XX          3
-+#define MACH_BCM933XX          4
-+
-+/*
-  * Valid machtype for group TITAN
-  */
- #define	MACH_TITAN_YOSEMITE	1 	/* PMC-Sierra Yosemite */
-diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
---- linux.old/include/asm-mips/cpu.h	2006-04-27 18:04:38.000000000 +0200
-+++ linux.dev/include/asm-mips/cpu.h	2006-04-27 19:24:19.000000000 +0200
-@@ -22,6 +22,11 @@
-    spec.
- */
- 
-+#define PRID_COPT_MASK         0xff000000
-+#define PRID_COMP_MASK         0x00ff0000
-+#define PRID_IMP_MASK          0x0000ff00
-+#define PRID_REV_MASK          0x000000ff
-+
- #define PRID_COMP_LEGACY       0x000000
- #define PRID_COMP_MIPS         0x010000
- #define PRID_COMP_BROADCOM     0x020000
-@@ -58,6 +63,7 @@
- #define PRID_IMP_RM7000		0x2700
- #define PRID_IMP_NEVADA		0x2800		/* RM5260 ??? */
- #define PRID_IMP_RM9000		0x3400
-+#define PRID_IMP_BCM4710	0x4000
- #define PRID_IMP_R5432		0x5400
- #define PRID_IMP_R5500		0x5500
- #define PRID_IMP_4KC		0x8000
-@@ -66,10 +72,16 @@
- #define PRID_IMP_4KEC		0x8400
- #define PRID_IMP_4KSC		0x8600
- #define PRID_IMP_25KF		0x8800
-+#define PRID_IMP_BCM3302	0x9000
-+#define PRID_IMP_BCM3303	0x9100
- #define PRID_IMP_24K		0x9300
- 
- #define PRID_IMP_UNKNOWN	0xff00
- 
-+#define       BCM330X(id) \
-+	(((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \
-+	|| ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
-+
- /*
-  * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
-  */
-@@ -174,7 +186,9 @@
- #define CPU_AU1550		57
- #define CPU_24K			58
- #define CPU_AU1200		59
--#define CPU_LAST		59
-+#define CPU_BCM4710		60
-+#define CPU_BCM3302		61
-+#define CPU_LAST		61
- 
- /*
-  * ISA Level encodings
-diff -urN linux.old/include/asm-mips/r4kcache.h linux.dev/include/asm-mips/r4kcache.h
---- linux.old/include/asm-mips/r4kcache.h	2006-04-27 18:04:38.000000000 +0200
-+++ linux.dev/include/asm-mips/r4kcache.h	2006-04-27 19:24:19.000000000 +0200
-@@ -658,4 +658,17 @@
- 			cache128_unroll32(addr|ws,Index_Writeback_Inv_SD);
- }
- 
-+extern inline void fill_icache_line(unsigned long addr)
-+{       
-+	__asm__ __volatile__(
-+		".set noreorder\n\t"
-+		".set mips3\n\t"
-+		"cache %1, (%0)\n\t"
-+		".set mips0\n\t"
-+		".set reorder"
-+		:
-+		: "r" (addr),
-+		"i" (Fill));
-+}      
-+
- #endif /* __ASM_R4KCACHE_H */
-diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h
---- linux.old/include/asm-mips/serial.h	2006-04-27 18:04:38.000000000 +0200
-+++ linux.dev/include/asm-mips/serial.h	2006-04-27 19:24:19.000000000 +0200
-@@ -223,6 +223,13 @@
- #define TXX927_SERIAL_PORT_DEFNS
- #endif
- 
-+#ifdef CONFIG_BCM947XX
-+/* reserve 4 ports to be configured at runtime */
-+#define BCM947XX_SERIAL_PORT_DEFNS { 0, }, { 0, }, { 0, }, { 0, },
-+#else
-+#define BCM947XX_SERIAL_PORT_DEFNS
-+#endif
-+
- #ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
- #define STD_SERIAL_PORT_DEFNS			\
- 	/* UART CLK   PORT IRQ     FLAGS        */			\
-@@ -470,6 +477,7 @@
- #define SERIAL_PORT_DFNS			\
- 	ATLAS_SERIAL_PORT_DEFNS			\
- 	AU1000_SERIAL_PORT_DEFNS		\
-+	BCM947XX_SERIAL_PORT_DEFNS		\
- 	COBALT_SERIAL_PORT_DEFNS		\
- 	DDB5477_SERIAL_PORT_DEFNS		\
- 	EV96100_SERIAL_PORT_DEFNS		\
-diff -urN linux.old/init/do_mounts.c linux.dev/init/do_mounts.c
---- linux.old/init/do_mounts.c	2006-04-27 18:04:38.000000000 +0200
-+++ linux.dev/init/do_mounts.c	2006-04-27 19:24:19.000000000 +0200
-@@ -254,7 +254,13 @@
- 	{ "ftlb", 0x2c08 },
- 	{ "ftlc", 0x2c10 },
- 	{ "ftld", 0x2c18 },
-+#if defined(CONFIG_MTD_BLOCK) || defined(CONFIG_MTD_BLOCK_RO)
- 	{ "mtdblock", 0x1f00 },
-+	{ "mtdblock0",0x1f00 },
-+	{ "mtdblock1",0x1f01 },
-+	{ "mtdblock2",0x1f02 },
-+	{ "mtdblock3",0x1f03 },
-+#endif
- 	{ "nb", 0x2b00 },
- 	{ NULL, 0 }
- };
diff --git a/openwrt/target/linux/brcm-2.4/patches/002-wl_fix.patch b/openwrt/target/linux/brcm-2.4/patches/002-wl_fix.patch
deleted file mode 100644
index 95044b6d60..0000000000
--- a/openwrt/target/linux/brcm-2.4/patches/002-wl_fix.patch
+++ /dev/null
@@ -1,348 +0,0 @@
-diff -urN linux.old/include/linux/netdevice.h linux.dev/include/linux/netdevice.h
---- linux.old/include/linux/netdevice.h	2006-03-19 06:32:22.000000000 +0100
-+++ linux.dev/include/linux/netdevice.h	2006-03-19 06:33:21.000000000 +0100
-@@ -296,10 +296,7 @@
- 	/* List of functions to handle Wireless Extensions (instead of ioctl).
- 	 * See <net/iw_handler.h> for details. Jean II */
- 	const struct iw_handler_def *	wireless_handlers;
--	/* Instance data managed by the core of Wireless Extensions. */
--	struct iw_public_data *	wireless_data;
- 
--	struct ethtool_ops *ethtool_ops;
- 
- 	/*
- 	 * This marks the end of the "visible" part of the structure. All
-@@ -354,8 +351,8 @@
- 
- 	struct Qdisc		*qdisc;
- 	struct Qdisc		*qdisc_sleeping;
-+	struct Qdisc		*qdisc_list;
- 	struct Qdisc		*qdisc_ingress;
--	struct list_head	qdisc_list;
- 	unsigned long		tx_queue_len;	/* Max frames per queue allowed */
- 
- 	/* hard_start_xmit synchronizer */
-@@ -455,6 +452,10 @@
- 	/* this will get initialized at each interface type init routine */
- 	struct divert_blk	*divert;
- #endif /* CONFIG_NET_DIVERT */
-+	struct ethtool_ops *ethtool_ops;
-+
-+	/* Instance data managed by the core of Wireless Extensions. */
-+	struct iw_public_data *	wireless_data;
- };
- 
- /* 2.6 compatibility */
-diff -urN linux.old/include/linux/skbuff.h linux.dev/include/linux/skbuff.h
---- linux.old/include/linux/skbuff.h	2006-03-19 06:32:22.000000000 +0100
-+++ linux.dev/include/linux/skbuff.h	2006-03-19 06:29:41.000000000 +0100
-@@ -138,10 +138,6 @@
- 	struct sock	*sk;			/* Socket we are owned by 			*/
- 	struct timeval	stamp;			/* Time we arrived				*/
- 	struct net_device	*dev;		/* Device we arrived on/are leaving by		*/
--	struct net_device	*real_dev;	/* For support of point to point protocols 
--						   (e.g. 802.3ad) over bonding, we must save the
--						   physical device that got the packet before
--						   replacing skb->dev with the virtual device.  */
- 
- 	/* Transport layer header */
- 	union
-@@ -225,6 +221,10 @@
- #if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-        struct nf_info	*nf_info;
- #endif
-+	struct net_device	*real_dev;	/* For support of point to point protocols 
-+						   (e.g. 802.3ad) over bonding, we must save the
-+						   physical device that got the packet before
-+						   replacing skb->dev with the virtual device.  */
- };
- 
- #ifdef __KERNEL__
-diff -urN linux.old/include/net/pkt_sched.h linux.dev/include/net/pkt_sched.h
---- linux.old/include/net/pkt_sched.h	2006-03-19 06:32:22.000000000 +0100
-+++ linux.dev/include/net/pkt_sched.h	2006-03-19 06:29:41.000000000 +0100
-@@ -63,8 +63,11 @@
- 	int 			(*enqueue)(struct sk_buff *, struct Qdisc *);
- 	struct sk_buff *	(*dequeue)(struct Qdisc *);
- 	int 			(*requeue)(struct sk_buff *, struct Qdisc *);
--	unsigned int		(*drop)(struct Qdisc *);
--
-+#ifdef CONFIG_BCM4710
-+	int			(*drop)(struct Qdisc *);
-+#else
-+	unsigned int            (*drop)(struct Qdisc *);
-+#endif
- 	int			(*init)(struct Qdisc *, struct rtattr *arg);
- 	void			(*reset)(struct Qdisc *);
- 	void			(*destroy)(struct Qdisc *);
-@@ -84,12 +87,19 @@
- #define TCQ_F_THROTTLED	2
- #define TCQ_F_INGRESS	4
- 	struct Qdisc_ops	*ops;
-+#ifdef CONFIG_BCM4710
-+	struct Qdisc            *next;
-+#endif
- 	u32			handle;
--	u32			parent;
-+#ifndef CONFIG_BCM4710
-+	u32                     parent;
-+#endif
- 	atomic_t		refcnt;
- 	struct sk_buff_head	q;
- 	struct net_device	*dev;
--	struct list_head	list;
-+#ifndef CONFIG_BCM4710
-+	struct list_head        list;
-+#endif
- 
- 	struct tc_stats		stats;
- 	int			(*reshape_fail)(struct sk_buff *skb, struct Qdisc *q);
-diff -urN linux.old/net/core/Makefile linux.dev/net/core/Makefile
---- linux.old/net/core/Makefile	2006-03-19 06:32:22.000000000 +0100
-+++ linux.dev/net/core/Makefile	2006-03-19 06:29:41.000000000 +0100
-@@ -9,7 +9,11 @@
- 
- O_TARGET := core.o
- 
-+ifeq ($(CONFIG_BCM4710),y)
-+export-objs := netfilter.o profile.o neighbour.o
-+else
- export-objs := netfilter.o profile.o ethtool.o neighbour.o
-+endif
- 
- obj-y := sock.o skbuff.o iovec.o datagram.o scm.o
- 
-@@ -21,8 +25,13 @@
- 
- obj-$(CONFIG_FILTER) += filter.o
- 
-+ifeq ($(CONFIG_BCM4710),y)
-+obj-$(CONFIG_NET) +=	dev.o dev_mcast.o dst.o neighbour.o \
-+			rtnetlink.o utils.o
-+else
- obj-$(CONFIG_NET) +=	dev.o ethtool.o dev_mcast.o dst.o neighbour.o \
- 			rtnetlink.o utils.o
-+endif
- 
- obj-$(CONFIG_NETFILTER) += netfilter.o
- obj-$(CONFIG_NET_DIVERT) += dv.o
-diff -urN linux.old/net/core/dev.c linux.dev/net/core/dev.c
---- linux.old/net/core/dev.c	2006-03-19 06:32:22.000000000 +0100
-+++ linux.dev/net/core/dev.c	2006-03-19 06:29:41.000000000 +0100
-@@ -2232,6 +2232,7 @@
- 			    cmd == SIOCGMIIPHY ||
- 			    cmd == SIOCGMIIREG ||
- 			    cmd == SIOCSMIIREG ||
-+			    cmd == SIOCETHTOOL ||
- 			    cmd == SIOCWANDEV) {
- 				if (dev->do_ioctl) {
- 					if (!netif_device_present(dev))
-@@ -2324,6 +2325,7 @@
- 			}
- 			return ret;
- 
-+#ifndef CONFIG_BCM4710
- 		case SIOCETHTOOL:
- 			dev_load(ifr.ifr_name);
- 			rtnl_lock();
-@@ -2337,6 +2339,7 @@
- 					ret = -EFAULT;
- 			}
- 			return ret;
-+#endif
- 
- 		/*
- 		 *	These ioctl calls:
-@@ -2412,6 +2415,7 @@
- 		 
- 		default:
- 			if (cmd == SIOCWANDEV ||
-+			    (cmd == SIOCETHTOOL) ||
- 			    (cmd >= SIOCDEVPRIVATE &&
- 			     cmd <= SIOCDEVPRIVATE + 15)) {
- 				dev_load(ifr.ifr_name);
-diff -urN linux.old/net/sched/sch_api.c linux.dev/net/sched/sch_api.c
---- linux.old/net/sched/sch_api.c	2006-03-19 06:32:22.000000000 +0100
-+++ linux.dev/net/sched/sch_api.c	2006-03-19 06:29:41.000000000 +0100
-@@ -194,11 +194,12 @@
- {
- 	struct Qdisc *q;
- 
--	list_for_each_entry(q, &dev->qdisc_list, list) {
-+        for (q = dev->qdisc_list; q; q = q->next) {
- 		if (q->handle == handle)
- 			return q;
- 	}
- 	return NULL;
-+
- }
- 
- struct Qdisc *qdisc_leaf(struct Qdisc *p, u32 classid)
-@@ -371,8 +372,6 @@
- 			unsigned long cl = cops->get(parent, classid);
- 			if (cl) {
- 				err = cops->graft(parent, cl, new, old);
--				if (new)
--					new->parent = classid;
- 				cops->put(parent, cl);
- 			}
- 		}
-@@ -427,7 +426,6 @@
- 
- 	memset(sch, 0, size);
- 
--	INIT_LIST_HEAD(&sch->list);
- 	skb_queue_head_init(&sch->q);
- 
- 	if (handle == TC_H_INGRESS)
-@@ -453,7 +451,8 @@
- 
- 	if (!ops->init || (err = ops->init(sch, tca[TCA_OPTIONS-1])) == 0) {
- 		write_lock(&qdisc_tree_lock);
--		list_add_tail(&sch->list, &dev->qdisc_list);
-+		sch->next = dev->qdisc_list;
-+		dev->qdisc_list = sch;
- 		write_unlock(&qdisc_tree_lock);
- #ifdef CONFIG_NET_ESTIMATOR
- 		if (tca[TCA_RATE-1])
-@@ -808,19 +807,16 @@
- 		if (idx > s_idx)
- 			s_q_idx = 0;
- 		read_lock(&qdisc_tree_lock);
--		q_idx = 0;
--		list_for_each_entry(q, &dev->qdisc_list, list) {
--			if (q_idx < s_q_idx) {
--				q_idx++;
--				continue;
--			}
--			if (tc_fill_qdisc(skb, q, q->parent, NETLINK_CB(cb->skb).pid,
--					  cb->nlh->nlmsg_seq, NLM_F_MULTI, RTM_NEWQDISC) <= 0) {
--				read_unlock(&qdisc_tree_lock);
--				goto done;
--			}
--			q_idx++;
--		}
-+                for (q = dev->qdisc_list, q_idx = 0; q;
-+                     q = q->next, q_idx++) {
-+                        if (q_idx < s_q_idx)
-+                                continue;
-+                        if (tc_fill_qdisc(skb, q, 0, NETLINK_CB(cb->skb).pid,
-+                                          cb->nlh->nlmsg_seq, NLM_F_MULTI, RTM_NEWQDISC) <= 0) {
-+                                read_unlock(&qdisc_tree_lock);
-+                                goto done;
-+                        }
-+                }
- 		read_unlock(&qdisc_tree_lock);
- 	}
- 
-@@ -1033,27 +1029,24 @@
- 	t = 0;
- 
- 	read_lock(&qdisc_tree_lock);
--	list_for_each_entry(q, &dev->qdisc_list, list) {
--		if (t < s_t || !q->ops->cl_ops ||
--		    (tcm->tcm_parent &&
--		     TC_H_MAJ(tcm->tcm_parent) != q->handle)) {
--			t++;
--			continue;
--		}
--		if (t > s_t)
--			memset(&cb->args[1], 0, sizeof(cb->args)-sizeof(cb->args[0]));
--		arg.w.fn = qdisc_class_dump;
--		arg.skb = skb;
--		arg.cb = cb;
--		arg.w.stop  = 0;
--		arg.w.skip = cb->args[1];
--		arg.w.count = 0;
--		q->ops->cl_ops->walk(q, &arg.w);
--		cb->args[1] = arg.w.count;
--		if (arg.w.stop)
--			break;
--		t++;
--	}
-+        for (q=dev->qdisc_list, t=0; q; q = q->next, t++) {
-+                if (t < s_t) continue;
-+                if (!q->ops->cl_ops) continue;
-+                if (tcm->tcm_parent && TC_H_MAJ(tcm->tcm_parent) != q->handle)
-+                        continue;
-+                if (t > s_t)
-+                        memset(&cb->args[1], 0, sizeof(cb->args)-sizeof(cb->args[0]));
-+                arg.w.fn = qdisc_class_dump;
-+                arg.skb = skb;
-+                arg.cb = cb;
-+                arg.w.stop  = 0;
-+                arg.w.skip = cb->args[1];
-+                arg.w.count = 0;
-+                q->ops->cl_ops->walk(q, &arg.w);
-+                cb->args[1] = arg.w.count;
-+                if (arg.w.stop)
-+                        break;
-+        }
- 	read_unlock(&qdisc_tree_lock);
- 
- 	cb->args[0] = t;
-diff -urN linux.old/net/sched/sch_generic.c linux.dev/net/sched/sch_generic.c
---- linux.old/net/sched/sch_generic.c	2006-03-19 06:32:22.000000000 +0100
-+++ linux.dev/net/sched/sch_generic.c	2006-03-19 06:29:41.000000000 +0100
-@@ -399,7 +399,6 @@
- 		return NULL;
- 	memset(sch, 0, size);
- 
--	INIT_LIST_HEAD(&sch->list);
- 	skb_queue_head_init(&sch->q);
- 	sch->ops = ops;
- 	sch->enqueue = ops->enqueue;
-@@ -429,11 +428,22 @@
- void qdisc_destroy(struct Qdisc *qdisc)
- {
- 	struct Qdisc_ops *ops = qdisc->ops;
-+	struct net_device *dev;
- 
- 	if (qdisc->flags&TCQ_F_BUILTIN ||
- 	    !atomic_dec_and_test(&qdisc->refcnt))
- 		return;
--	list_del(&qdisc->list);
-+
-+	dev = qdisc->dev;
-+	if (dev) {
-+		struct Qdisc *q, **qp;
-+		for (qp = &qdisc->dev->qdisc_list; (q=*qp) != NULL; qp = &q->next) {
-+			if (q == qdisc) {
-+				*qp = q->next;
-+				break;
-+			}
-+		}
-+	}
- #ifdef CONFIG_NET_ESTIMATOR
- 	qdisc_kill_estimator(&qdisc->stats);
- #endif
-@@ -462,9 +472,9 @@
- 				return;
- 			}
- 			write_lock(&qdisc_tree_lock);
--			list_add_tail(&qdisc->list, &dev->qdisc_list);
-+			qdisc->next = dev->qdisc_list;
-+			dev->qdisc_list = qdisc;
- 			write_unlock(&qdisc_tree_lock);
--
- 		} else {
- 			qdisc =  &noqueue_qdisc;
- 		}
-@@ -508,7 +518,7 @@
- 	dev->qdisc = &noop_qdisc;
- 	spin_unlock_bh(&dev->queue_lock);
- 	dev->qdisc_sleeping = &noop_qdisc;
--	INIT_LIST_HEAD(&dev->qdisc_list);
-+	dev->qdisc_list = NULL;
- 	write_unlock(&qdisc_tree_lock);
- 
- 	dev_watchdog_init(dev);
-@@ -530,7 +540,7 @@
- 		qdisc_destroy(qdisc);
-         }
- #endif
--	BUG_TRAP(list_empty(&dev->qdisc_list));
-+	BUG_TRAP(dev->qdisc_list == NULL);
- 	BUG_TRAP(!timer_pending(&dev->watchdog_timer));
- 	spin_unlock_bh(&dev->queue_lock);
- 	write_unlock(&qdisc_tree_lock);
diff --git a/openwrt/target/linux/brcm-2.4/patches/003-bcm47xx_cache_fixes.patch b/openwrt/target/linux/brcm-2.4/patches/003-bcm47xx_cache_fixes.patch
deleted file mode 100644
index e971e7fdfd..0000000000
--- a/openwrt/target/linux/brcm-2.4/patches/003-bcm47xx_cache_fixes.patch
+++ /dev/null
@@ -1,498 +0,0 @@
-diff -urN linux.old/arch/mips/kernel/entry.S linux.dev/arch/mips/kernel/entry.S
---- linux.old/arch/mips/kernel/entry.S	2005-07-05 16:46:49.000000000 +0200
-+++ linux.dev/arch/mips/kernel/entry.S	2005-07-06 11:23:55.000000000 +0200
-@@ -100,6 +100,10 @@
- 		 * and R4400 SC and MC versions.
- 		 */
- NESTED(except_vec3_generic, 0, sp)
-+#ifdef CONFIG_BCM4710
-+		nop
-+		nop
-+#endif
- #if R5432_CP0_INTERRUPT_WAR
- 		mfc0	k0, CP0_INDEX
- #endif
-diff -urN linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c
---- linux.old/arch/mips/mm/c-r4k.c	2005-07-05 16:46:49.000000000 +0200
-+++ linux.dev/arch/mips/mm/c-r4k.c	2005-07-06 11:23:55.000000000 +0200
-@@ -14,6 +14,12 @@
- #include <linux/mm.h>
- #include <linux/bitops.h>
- 
-+#ifdef CONFIG_BCM4710
-+#include "../bcm947xx/include/typedefs.h"
-+#include "../bcm947xx/include/sbconfig.h"
-+#include <asm/paccess.h>
-+#endif
-+
- #include <asm/bcache.h>
- #include <asm/bootinfo.h>
- #include <asm/cacheops.h>
-@@ -40,6 +46,8 @@
- 	.bc_inv = (void *)no_sc_noop
- };
- 
-+int bcm4710 = 0;
-+EXPORT_SYMBOL(bcm4710);
- struct bcache_ops *bcops = &no_sc_ops;
- 
- #define cpu_is_r4600_v1_x()	((read_c0_prid() & 0xfffffff0) == 0x2010)
-@@ -64,8 +72,10 @@
- static inline void r4k_blast_dcache_page_setup(void)
- {
- 	unsigned long dc_lsize = current_cpu_data.dcache.linesz;
--
--	if (dc_lsize == 16)
-+	
-+	if (bcm4710)
-+		r4k_blast_dcache_page = blast_dcache_page;
-+	else if (dc_lsize == 16)
- 		r4k_blast_dcache_page = blast_dcache16_page;
- 	else if (dc_lsize == 32)
- 		r4k_blast_dcache_page = r4k_blast_dcache_page_dc32;
-@@ -77,7 +87,9 @@
- {
- 	unsigned long dc_lsize = current_cpu_data.dcache.linesz;
- 
--	if (dc_lsize == 16)
-+	if (bcm4710)
-+		r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+	else if (dc_lsize == 16)
- 		r4k_blast_dcache_page_indexed = blast_dcache16_page_indexed;
- 	else if (dc_lsize == 32)
- 		r4k_blast_dcache_page_indexed = blast_dcache32_page_indexed;
-@@ -89,7 +101,9 @@
- {
- 	unsigned long dc_lsize = current_cpu_data.dcache.linesz;
- 
--	if (dc_lsize == 16)
-+	if (bcm4710)
-+		r4k_blast_dcache = blast_dcache;
-+	else if (dc_lsize == 16)
- 		r4k_blast_dcache = blast_dcache16;
- 	else if (dc_lsize == 32)
- 		r4k_blast_dcache = blast_dcache32;
-@@ -266,6 +280,7 @@
- 	r4k_blast_dcache();
- 	r4k_blast_icache();
- 
-+	if (!bcm4710)
- 	switch (current_cpu_data.cputype) {
- 	case CPU_R4000SC:
- 	case CPU_R4000MC:
-@@ -304,10 +319,10 @@
- 	 * Kludge alert.  For obscure reasons R4000SC and R4400SC go nuts if we
- 	 * only flush the primary caches but R10000 and R12000 behave sane ...
- 	 */
--	if (current_cpu_data.cputype == CPU_R4000SC ||
-+	if (!bcm4710 && (current_cpu_data.cputype == CPU_R4000SC ||
- 	    current_cpu_data.cputype == CPU_R4000MC ||
- 	    current_cpu_data.cputype == CPU_R4400SC ||
--	    current_cpu_data.cputype == CPU_R4400MC)
-+	    current_cpu_data.cputype == CPU_R4400MC))
- 		r4k_blast_scache();
- }
- 
-@@ -383,12 +398,15 @@
- 	unsigned long ic_lsize = current_cpu_data.icache.linesz;
- 	unsigned long addr, aend;
- 
-+	addr = start & ~(dc_lsize - 1);
-+	aend = (end - 1) & ~(dc_lsize - 1);
-+
- 	if (!cpu_has_ic_fills_f_dc) {
- 		if (end - start > dcache_size)
- 			r4k_blast_dcache();
- 		else {
--			addr = start & ~(dc_lsize - 1);
--			aend = (end - 1) & ~(dc_lsize - 1);
-+			BCM4710_PROTECTED_FILL_TLB(addr);
-+			BCM4710_PROTECTED_FILL_TLB(aend);
- 
- 			while (1) {
- 				/* Hit_Writeback_Inv_D */
-@@ -403,8 +421,6 @@
- 	if (end - start > icache_size)
- 		r4k_blast_icache();
- 	else {
--		addr = start & ~(ic_lsize - 1);
--		aend = (end - 1) & ~(ic_lsize - 1);
- 		while (1) {
- 			/* Hit_Invalidate_I */
- 			protected_flush_icache_line(addr);
-@@ -413,6 +429,9 @@
- 			addr += ic_lsize;
- 		}
- 	}
-+
-+	if (bcm4710)
-+		flush_cache_all();
- }
- 
- /*
-@@ -443,7 +462,8 @@
- 	if (cpu_has_subset_pcaches) {
- 		unsigned long addr = (unsigned long) page_address(page);
- 
--		r4k_blast_scache_page(addr);
-+		if (!bcm4710)
-+			r4k_blast_scache_page(addr);
- 		ClearPageDcacheDirty(page);
- 
- 		return;
-@@ -451,6 +471,7 @@
- 
- 	if (!cpu_has_ic_fills_f_dc) {
- 		unsigned long addr = (unsigned long) page_address(page);
-+
- 		r4k_blast_dcache_page(addr);
- 		ClearPageDcacheDirty(page);
- 	}
-@@ -477,7 +498,7 @@
- 	/* Catch bad driver code */
- 	BUG_ON(size == 0);
- 
--	if (cpu_has_subset_pcaches) {
-+	if (!bcm4710 && cpu_has_subset_pcaches) {
- 		unsigned long sc_lsize = current_cpu_data.scache.linesz;
- 
- 		if (size >= scache_size) {
-@@ -509,6 +530,8 @@
- 		R4600_HIT_CACHEOP_WAR_IMPL;
- 		a = addr & ~(dc_lsize - 1);
- 		end = (addr + size - 1) & ~(dc_lsize - 1);
-+		BCM4710_FILL_TLB(a);
-+		BCM4710_FILL_TLB(end);
- 		while (1) {
- 			flush_dcache_line(a);	/* Hit_Writeback_Inv_D */
- 			if (a == end)
-@@ -527,7 +550,7 @@
- 	/* Catch bad driver code */
- 	BUG_ON(size == 0);
- 
--	if (cpu_has_subset_pcaches) {
-+	if (!bcm4710 && (cpu_has_subset_pcaches)) {
- 		unsigned long sc_lsize = current_cpu_data.scache.linesz;
- 
- 		if (size >= scache_size) {
-@@ -554,6 +577,8 @@
- 		R4600_HIT_CACHEOP_WAR_IMPL;
- 		a = addr & ~(dc_lsize - 1);
- 		end = (addr + size - 1) & ~(dc_lsize - 1);
-+		BCM4710_FILL_TLB(a);
-+		BCM4710_FILL_TLB(end);
- 		while (1) {
- 			flush_dcache_line(a);	/* Hit_Writeback_Inv_D */
- 			if (a == end)
-@@ -577,6 +602,8 @@
- 	unsigned long dc_lsize = current_cpu_data.dcache.linesz;
- 
- 	R4600_HIT_CACHEOP_WAR_IMPL;
-+	BCM4710_PROTECTED_FILL_TLB(addr);
-+	BCM4710_PROTECTED_FILL_TLB(addr + 4);
- 	protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- 	protected_flush_icache_line(addr & ~(ic_lsize - 1));
- 	if (MIPS4K_ICACHE_REFILL_WAR) {
-@@ -986,10 +1013,12 @@
- 	case CPU_R4000MC:
- 	case CPU_R4400SC:
- 	case CPU_R4400MC:
--		probe_scache_kseg1 = (probe_func_t) (KSEG1ADDR(&probe_scache));
--		sc_present = probe_scache_kseg1(config);
--		if (sc_present)
--			c->options |= MIPS_CPU_CACHE_CDEX_S;
-+		if (!bcm4710) {
-+			probe_scache_kseg1 = (probe_func_t) (KSEG1ADDR(&probe_scache));
-+			sc_present = probe_scache_kseg1(config);
-+			if (sc_present)
-+				c->options |= MIPS_CPU_CACHE_CDEX_S;
-+		}
- 		break;
- 
- 	case CPU_R10000:
-@@ -1041,6 +1070,19 @@
- static inline void coherency_setup(void)
- {
- 	change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
-+	
-+#if defined(CONFIG_BCM4310) || defined(CONFIG_BCM4704) || defined(CONFIG_BCM5365)
-+	if (BCM330X(current_cpu_data.processor_id)) {
-+		uint32 cm;
-+
-+		cm = read_c0_diag();
-+		/* Enable icache */
-+		cm |= (1 << 31);
-+		/* Enable dcache */
-+		cm |= (1 << 30);
-+		write_c0_diag(cm);
-+	}
-+#endif
- 
- 	/*
- 	 * c0_status.cu=0 specifies that updates by the sc instruction use
-@@ -1073,6 +1115,12 @@
- 	memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80);
- 	memcpy((void *)(KSEG1 + 0x100), &except_vec2_generic, 0x80);
- 
-+	if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & PRID_REV_MASK) == 0) {
-+		printk("Enabling BCM4710A0 cache workarounds.\n");
-+		bcm4710 = 1;
-+	} else
-+		bcm4710 = 0;
-+	
- 	probe_pcache();
- 	setup_scache();
- 
-diff -urN linux.old/arch/mips/mm/tlbex-mips32.S linux.dev/arch/mips/mm/tlbex-mips32.S
---- linux.old/arch/mips/mm/tlbex-mips32.S	2005-07-05 16:46:49.000000000 +0200
-+++ linux.dev/arch/mips/mm/tlbex-mips32.S	2005-07-06 11:23:56.000000000 +0200
-@@ -90,6 +90,9 @@
- 	.set	noat
- 	LEAF(except_vec0_r4000)
- 	.set	mips3
-+#ifdef CONFIG_BCM4704
-+	nop
-+#endif
- #ifdef CONFIG_SMP
- 	mfc0	k1, CP0_CONTEXT
- 	la	k0, pgd_current
-diff -urN linux.old/include/asm-mips/r4kcache.h linux.dev/include/asm-mips/r4kcache.h
---- linux.old/include/asm-mips/r4kcache.h	2005-07-05 16:46:49.000000000 +0200
-+++ linux.dev/include/asm-mips/r4kcache.h	2005-07-06 12:52:57.000000000 +0200
-@@ -15,6 +15,18 @@
- #include <asm/asm.h>
- #include <asm/cacheops.h>
- 
-+#ifdef CONFIG_BCM4710
-+#define BCM4710_DUMMY_RREG() (((sbconfig_t *)(KSEG1ADDR(SB_ENUM_BASE + SBCONFIGOFF)))->sbimstate)
-+
-+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- #define cache_op(op,addr)						\
- 	__asm__ __volatile__(						\
- 	"	.set	noreorder				\n"	\
-@@ -27,12 +39,25 @@
- 
- static inline void flush_icache_line_indexed(unsigned long addr)
- {
--	cache_op(Index_Invalidate_I, addr);
-+	unsigned int way;
-+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+	
-+	for (way = 0; way < current_cpu_data.dcache.ways; way++) {
-+		cache_op(Index_Invalidate_I, addr);
-+		addr += ws_inc;
-+	}
- }
- 
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
--	cache_op(Index_Writeback_Inv_D, addr);
-+	unsigned int way;
-+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+	
-+	for (way = 0; way < current_cpu_data.dcache.ways; way++) {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Index_Writeback_Inv_D, addr);
-+		addr += ws_inc;
-+	}
- }
- 
- static inline void flush_scache_line_indexed(unsigned long addr)
-@@ -47,6 +72,7 @@
- 
- static inline void flush_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Writeback_Inv_D, addr);
- }
- 
-@@ -91,6 +117,7 @@
-  */
- static inline void protected_writeback_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	__asm__ __volatile__(
- 		".set noreorder\n\t"
- 		".set mips3\n"
-@@ -138,6 +165,62 @@
- 		: "r" (base),						\
- 		  "i" (op));
- 
-+#define cache_unroll(base,op)                   \
-+	__asm__ __volatile__("                  \
-+		.set noreorder;                 \
-+		.set mips3;                     \
-+		cache %1, (%0);                 \
-+		.set mips0;                     \
-+		.set reorder"                   \
-+		:                               \
-+		: "r" (base),                   \
-+		  "i" (op));
-+
-+
-+static inline void blast_dcache(void)
-+{
-+	unsigned long start = KSEG0;
-+	unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+	unsigned long end = (start + dcache_size);
-+
-+	while(start < end) {
-+		BCM4710_DUMMY_RREG();
-+		cache_unroll(start,Index_Writeback_Inv_D);
-+		start += current_cpu_data.dcache.linesz;
-+	}
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+
-+	BCM4710_FILL_TLB(start);
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_unroll(start,Hit_Writeback_Inv_D);
-+		start += current_cpu_data.dcache.linesz;
-+	} while (start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+	unsigned long ws_end = current_cpu_data.dcache.ways <<
-+	                       current_cpu_data.dcache.waybit;
-+	unsigned long ws, addr;
-+
-+	for (ws = 0; ws < ws_end; ws += ws_inc) {
-+		start = page + ws;
-+		for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+			BCM4710_DUMMY_RREG();
-+			cache_unroll(addr,Index_Writeback_Inv_D);
-+		}
-+	}	
-+}
-+
- static inline void blast_dcache16(void)
- {
- 	unsigned long start = KSEG0;
-@@ -148,8 +231,9 @@
- 	unsigned long ws, addr;
- 
- 	for (ws = 0; ws < ws_end; ws += ws_inc) 
--		for (addr = start; addr < end; addr += 0x200)
-+		for (addr = start; addr < end; addr += 0x200) {
- 			cache16_unroll32(addr|ws,Index_Writeback_Inv_D);
-+		}
- }
- 
- static inline void blast_dcache16_page(unsigned long page)
-@@ -173,8 +257,9 @@
- 	unsigned long ws, addr;
- 
- 	for (ws = 0; ws < ws_end; ws += ws_inc) 
--		for (addr = start; addr < end; addr += 0x200) 
-+		for (addr = start; addr < end; addr += 0x200) {
- 			cache16_unroll32(addr|ws,Index_Writeback_Inv_D);
-+		}
- }
- 
- static inline void blast_icache16(void)
-@@ -196,6 +281,7 @@
- 	unsigned long start = page;
- 	unsigned long end = start + PAGE_SIZE;
- 
-+	BCM4710_FILL_TLB(start);
- 	do {
- 		cache16_unroll32(start,Hit_Invalidate_I);
- 		start += 0x200;
-@@ -281,6 +367,7 @@
- 		: "r" (base),						\
- 		  "i" (op));
- 
-+
- static inline void blast_dcache32(void)
- {
- 	unsigned long start = KSEG0;
-@@ -291,8 +378,9 @@
- 	unsigned long ws, addr;
- 
- 	for (ws = 0; ws < ws_end; ws += ws_inc) 
--		for (addr = start; addr < end; addr += 0x400) 
-+		for (addr = start; addr < end; addr += 0x400) {
- 			cache32_unroll32(addr|ws,Index_Writeback_Inv_D);
-+		}
- }
- 
- static inline void blast_dcache32_page(unsigned long page)
-@@ -316,8 +404,9 @@
- 	unsigned long ws, addr;
- 
- 	for (ws = 0; ws < ws_end; ws += ws_inc) 
--		for (addr = start; addr < end; addr += 0x400) 
-+		for (addr = start; addr < end; addr += 0x400) {
- 			cache32_unroll32(addr|ws,Index_Writeback_Inv_D);
-+		}
- }
- 
- static inline void blast_icache32(void)
-@@ -339,6 +428,7 @@
- 	unsigned long start = page;
- 	unsigned long end = start + PAGE_SIZE;
- 
-+	BCM4710_FILL_TLB(start);
- 	do {
- 		cache32_unroll32(start,Hit_Invalidate_I);
- 		start += 0x400;
-@@ -443,6 +533,7 @@
- 	unsigned long start = page;
- 	unsigned long end = start + PAGE_SIZE;
- 
-+	BCM4710_FILL_TLB(start);
- 	do {
- 		cache64_unroll32(start,Hit_Invalidate_I);
- 		start += 0x800;
-diff -urN linux.old/include/asm-mips/stackframe.h linux.dev/include/asm-mips/stackframe.h
---- linux.old/include/asm-mips/stackframe.h	2005-07-05 16:46:49.000000000 +0200
-+++ linux.dev/include/asm-mips/stackframe.h	2005-07-06 11:23:56.000000000 +0200
-@@ -209,6 +209,20 @@
- 
- #endif
- 
-+#if defined(CONFIG_BCM4710) || defined(CONFIG_BCM4704)
-+
-+#undef RESTORE_SP_AND_RET
-+#define RESTORE_SP_AND_RET                               \
-+		lw      sp,  PT_R29(sp);                 \
-+		.set    mips3;                           \
-+		nop;                                     \
-+		nop;                                     \
-+		eret;                                    \
-+		.set    mips0
-+
-+#endif
-+
-+
- #define RESTORE_SP                                       \
- 		lw	sp,  PT_R29(sp);                 \
- 
-diff -urN linux.old/mm/memory.c linux.dev/mm/memory.c
---- linux.old/mm/memory.c	2005-04-04 03:42:20.000000000 +0200
-+++ linux.dev/mm/memory.c	2005-07-06 11:23:56.000000000 +0200
-@@ -925,6 +925,7 @@
- 	flush_page_to_ram(new_page);
- 	flush_cache_page(vma, address);
- 	establish_pte(vma, address, page_table, pte_mkwrite(pte_mkdirty(mk_pte(new_page, vma->vm_page_prot))));
-+	flush_icache_page(vma, new_page);
- }
- 
- /*
diff --git a/openwrt/target/linux/brcm-2.4/patches/004-flash.patch b/openwrt/target/linux/brcm-2.4/patches/004-flash.patch
deleted file mode 100644
index 3511091ed2..0000000000
--- a/openwrt/target/linux/brcm-2.4/patches/004-flash.patch
+++ /dev/null
@@ -1,784 +0,0 @@
-diff -Nur linux-2.4.32/drivers/mtd/devices/Config.in linux-2.4.32-flash/drivers/mtd/devices/Config.in
---- linux-2.4.32/drivers/mtd/devices/Config.in	2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.32-flash/drivers/mtd/devices/Config.in	2006-03-27 17:10:51.000000000 +0200
-@@ -5,6 +5,7 @@
- mainmenu_option next_comment
- 
- comment 'Self-contained MTD device drivers'
-+bool '  Broadcom Chipcommon Serial Flash support' CONFIG_MTD_SFLASH
- dep_tristate '  Ramix PMC551 PCI Mezzanine RAM card support' CONFIG_MTD_PMC551 $CONFIG_MTD $CONFIG_PCI
- if [ "$CONFIG_MTD_PMC551" = "y" -o  "$CONFIG_MTD_PMC551" = "m" ]; then
-    bool '    PMC551 256M DRAM Bugfix' CONFIG_MTD_PMC551_BUGFIX
-diff -Nur linux-2.4.32/drivers/mtd/devices/Makefile linux-2.4.32-flash/drivers/mtd/devices/Makefile
---- linux-2.4.32/drivers/mtd/devices/Makefile	2002-11-29 00:53:13.000000000 +0100
-+++ linux-2.4.32-flash/drivers/mtd/devices/Makefile	2006-03-27 17:10:51.000000000 +0200
-@@ -3,6 +3,8 @@
- #
- # $Id: Makefile,v 1.4 2001/06/26 21:10:05 spse Exp $
- 
-+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
-+
- O_TARGET	:= devlink.o
- 
- #                       *** BIG UGLY NOTE ***
-@@ -12,6 +14,7 @@
- # here where previously there was none.  We now have to ensure that
- # doc200[01].o are linked before docprobe.o
- 
-+obj-$(CONFIG_MTD_SFLASH)	+= sflash.o
- obj-$(CONFIG_MTD_DOC1000)	+= doc1000.o
- obj-$(CONFIG_MTD_DOC2000)	+= doc2000.o
- obj-$(CONFIG_MTD_DOC2001)	+= doc2001.o
-diff -Nur linux-2.4.32/drivers/mtd/devices/sflash.c linux-2.4.32-flash/drivers/mtd/devices/sflash.c
---- linux-2.4.32/drivers/mtd/devices/sflash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-flash/drivers/mtd/devices/sflash.c	2006-03-27 17:10:51.000000000 +0200
-@@ -0,0 +1,298 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ *
-+ * $Id: sflash.c,v 1.1.1.3 2003/11/10 17:43:38 hyin Exp $
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/ioport.h>
-+#include <linux/mtd/compatmac.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/errno.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/minix_fs.h>
-+#include <linux/ext2_fs.h>
-+#include <linux/romfs_fs.h>
-+#include <linux/cramfs_fs.h>
-+#include <linux/jffs2.h>
-+#endif
-+
-+#include <typedefs.h>
-+#include <bcmdevs.h>
-+#include <bcmutils.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmnvram.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <sflash.h>
-+#include <trxhdr.h>
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+extern struct mtd_partition * init_mtd_partitions(struct mtd_info *mtd, size_t size);
-+#endif
-+
-+struct sflash_mtd {
-+	chipcregs_t *cc;
-+	struct semaphore lock;
-+	struct mtd_info mtd;
-+	struct mtd_erase_region_info regions[1];
-+};
-+
-+/* Private global state */
-+static struct sflash_mtd sflash;
-+
-+static int
-+sflash_mtd_poll(struct sflash_mtd *sflash, unsigned int offset, int timeout)
-+{
-+	int now = jiffies;
-+	int ret = 0;
-+
-+	for (;;) {
-+		if (!sflash_poll(sflash->cc, offset)) {
-+			ret = 0;
-+			break;
-+		}
-+		if (time_after(jiffies, now + timeout)) {
-+			printk(KERN_ERR "sflash: timeout\n");
-+			ret = -ETIMEDOUT;
-+			break;
-+		}
-+		if (current->need_resched) {
-+			set_current_state(TASK_UNINTERRUPTIBLE);
-+			schedule_timeout(timeout / 10);
-+		} else
-+			udelay(1);
-+	}
-+
-+	return ret;
-+}
-+
-+static int
-+sflash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+	struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv;
-+	int bytes, ret = 0;
-+
-+	/* Check address range */
-+	if (!len)
-+		return 0;
-+	if ((from + len) > mtd->size)
-+		return -EINVAL;
-+	
-+	down(&sflash->lock);
-+
-+	*retlen = 0;
-+	while (len) {
-+		if ((bytes = sflash_read(sflash->cc, (uint) from, len, buf)) < 0) {
-+			ret = bytes;
-+			break;
-+		}
-+		from += (loff_t) bytes;
-+		len -= bytes;
-+		buf += bytes;
-+		*retlen += bytes;
-+	}
-+
-+	up(&sflash->lock);
-+
-+	return ret;
-+}
-+
-+static int
-+sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+	struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv;
-+	int bytes, ret = 0;
-+
-+	/* Check address range */
-+	if (!len)
-+		return 0;
-+	if ((to + len) > mtd->size)
-+		return -EINVAL;
-+
-+	down(&sflash->lock);
-+
-+	*retlen = 0;
-+	while (len) {
-+		if ((bytes = sflash_write(sflash->cc, (uint) to, len, buf)) < 0) {
-+			ret = bytes;
-+			break;
-+		}
-+		if ((ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10)))
-+			break;
-+		to += (loff_t) bytes;
-+		len -= bytes;
-+		buf += bytes;
-+		*retlen += bytes;
-+	}
-+
-+	up(&sflash->lock);
-+
-+	return ret;
-+}
-+
-+static int
-+sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase)
-+{
-+	struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv;
-+	int i, j, ret = 0;
-+	unsigned int addr, len;
-+
-+	/* Check address range */
-+	if (!erase->len)
-+		return 0;
-+	if ((erase->addr + erase->len) > mtd->size)
-+		return -EINVAL;
-+
-+	addr = erase->addr;
-+	len = erase->len;
-+
-+	down(&sflash->lock);
-+
-+	/* Ensure that requested region is aligned */
-+	for (i = 0; i < mtd->numeraseregions; i++) {
-+		for (j = 0; j < mtd->eraseregions[i].numblocks; j++) {
-+			if (addr == mtd->eraseregions[i].offset + mtd->eraseregions[i].erasesize * j &&
-+			    len >= mtd->eraseregions[i].erasesize) {
-+				if ((ret = sflash_erase(sflash->cc, addr)) < 0)
-+					break;
-+				if ((ret = sflash_mtd_poll(sflash, addr, 10 * HZ)))
-+					break;
-+				addr += mtd->eraseregions[i].erasesize;
-+				len -= mtd->eraseregions[i].erasesize;
-+			}
-+		}
-+		if (ret)
-+			break;
-+	}
-+
-+	up(&sflash->lock);
-+
-+	/* Set erase status */
-+	if (ret)
-+		erase->state = MTD_ERASE_FAILED;
-+	else 
-+		erase->state = MTD_ERASE_DONE;
-+
-+	/* Call erase callback */
-+	if (erase->callback)
-+		erase->callback(erase);
-+
-+	return ret;
-+}
-+
-+#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE)
-+#define sflash_mtd_init init_module
-+#define sflash_mtd_exit cleanup_module
-+#endif
-+
-+mod_init_t
-+sflash_mtd_init(void)
-+{
-+	struct pci_dev *pdev;
-+	int ret = 0;
-+	struct sflash *info;
-+	uint bank, i;
-+#ifdef CONFIG_MTD_PARTITIONS
-+	struct mtd_partition *parts;
-+#endif
-+
-+	if (!(pdev = pci_find_device(VENDOR_BROADCOM, SB_CC, NULL))) {
-+		printk(KERN_ERR "sflash: chipcommon not found\n");
-+		return -ENODEV;
-+	}
-+
-+	memset(&sflash, 0, sizeof(struct sflash_mtd));
-+	init_MUTEX(&sflash.lock);
-+
-+	/* Map registers and flash base */
-+	if (!(sflash.cc = ioremap_nocache(pci_resource_start(pdev, 0),
-+					  pci_resource_len(pdev, 0)))) {
-+		printk(KERN_ERR "sflash: error mapping registers\n");
-+		ret = -EIO;
-+		goto fail;
-+	}
-+
-+	/* Initialize serial flash access */
-+	info = sflash_init(sflash.cc);
-+
-+	if (!info) {
-+		printk(KERN_ERR "sflash: found no supported devices\n");
-+		ret = -ENODEV;
-+		goto fail;
-+	}
-+
-+	/* Setup banks */
-+	sflash.regions[0].offset = 0;
-+	sflash.regions[0].erasesize = info->blocksize;
-+	sflash.regions[0].numblocks = info->numblocks;
-+	if (sflash.regions[0].erasesize > sflash.mtd.erasesize)
-+		sflash.mtd.erasesize = sflash.regions[0].erasesize;
-+	if (sflash.regions[0].erasesize * sflash.regions[0].numblocks) {
-+		sflash.mtd.size += sflash.regions[0].erasesize * sflash.regions[0].numblocks;
-+	}
-+	sflash.mtd.numeraseregions = 1;
-+	ASSERT(sflash.mtd.size == info->size);
-+
-+	/* Register with MTD */
-+	sflash.mtd.name = "sflash";
-+	sflash.mtd.type = MTD_NORFLASH;
-+	sflash.mtd.flags = MTD_CAP_NORFLASH;
-+	sflash.mtd.eraseregions = sflash.regions;
-+	sflash.mtd.module = THIS_MODULE;
-+	sflash.mtd.erase = sflash_mtd_erase;
-+	sflash.mtd.read = sflash_mtd_read;
-+	sflash.mtd.write = sflash_mtd_write;
-+	sflash.mtd.priv = &sflash;
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+	parts = init_mtd_partitions(&sflash.mtd, sflash.mtd.size);
-+	for (i = 0; parts[i].name; i++);
-+	ret = add_mtd_partitions(&sflash.mtd, parts, i);
-+#else
-+	ret = add_mtd_device(&sflash.mtd);
-+#endif
-+	if (ret) {
-+		printk(KERN_ERR "sflash: add_mtd failed\n");
-+		goto fail;
-+	}
-+
-+	return 0;
-+
-+ fail:
-+	if (sflash.cc)
-+		iounmap((void *) sflash.cc);
-+	return ret;
-+}
-+
-+mod_exit_t
-+sflash_mtd_exit(void)
-+{
-+#ifdef CONFIG_MTD_PARTITIONS
-+	del_mtd_partitions(&sflash.mtd);
-+#else
-+	del_mtd_device(&sflash.mtd);
-+#endif
-+	iounmap((void *) sflash.cc);
-+}
-+
-+module_init(sflash_mtd_init);
-+module_exit(sflash_mtd_exit);
-diff -Nur linux-2.4.32/drivers/mtd/maps/bcm947xx-flash.c linux-2.4.32-flash/drivers/mtd/maps/bcm947xx-flash.c
---- linux-2.4.32/drivers/mtd/maps/bcm947xx-flash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-flash/drivers/mtd/maps/bcm947xx-flash.c	2006-03-27 17:07:27.000000000 +0200
-@@ -0,0 +1,416 @@
-+/*
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
-+ *
-+ *  original functions for finding root filesystem from Mike Baker 
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ * 
-+ *
-+ * Copyright 2004, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * Flash mapping for BCM947XX boards
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/io.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#ifdef CONFIG_MTD_PARTITIONS
-+#include <linux/mtd/partitions.h>
-+#endif
-+#include <linux/config.h>
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmnvram.h>
-+#include <bcmutils.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <sbutils.h>
-+#include <trxhdr.h>
-+
-+/* Global SB handle */
-+extern void *bcm947xx_sbh;
-+extern spinlock_t bcm947xx_sbh_lock;
-+
-+/* Convenience */
-+#define sbh bcm947xx_sbh
-+#define sbh_lock bcm947xx_sbh_lock
-+
-+#define WINDOW_ADDR 0x1fc00000
-+#define WINDOW_SIZE 0x400000
-+#define BUSWIDTH 2
-+
-+static struct mtd_info *bcm947xx_mtd;
-+
-+__u8 bcm947xx_map_read8(struct map_info *map, unsigned long ofs)
-+{
-+	if (map->map_priv_2 == 1)
-+		return __raw_readb(map->map_priv_1 + ofs);
-+
-+	u16 val = __raw_readw(map->map_priv_1 + (ofs & ~1));
-+	if (ofs & 1)
-+		return ((val >> 8) & 0xff);
-+	else
-+		return (val & 0xff);
-+}
-+
-+__u16 bcm947xx_map_read16(struct map_info *map, unsigned long ofs)
-+{
-+	return __raw_readw(map->map_priv_1 + ofs);
-+}
-+
-+__u32 bcm947xx_map_read32(struct map_info *map, unsigned long ofs)
-+{
-+	return __raw_readl(map->map_priv_1 + ofs);
-+}
-+
-+void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-+{
-+	if (len==1) {
-+		memcpy_fromio(to, map->map_priv_1 + from, len);
-+	} else {
-+		int i;
-+		u16 *dest = (u16 *) to;
-+		u16 *src  = (u16 *) (map->map_priv_1 + from);
-+		for (i = 0; i < (len / 2); i++) {
-+			dest[i] = src[i];
-+		}
-+		if (len & 1)
-+			*((u8 *)dest+len-1) = src[i] & 0xff;
-+	}
-+}
-+
-+void bcm947xx_map_write8(struct map_info *map, __u8 d, unsigned long adr)
-+{
-+	__raw_writeb(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void bcm947xx_map_write16(struct map_info *map, __u16 d, unsigned long adr)
-+{
-+	__raw_writew(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void bcm947xx_map_write32(struct map_info *map, __u32 d, unsigned long adr)
-+{
-+	__raw_writel(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void bcm947xx_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-+{
-+	memcpy_toio(map->map_priv_1 + to, from, len);
-+}
-+
-+struct map_info bcm947xx_map = {
-+	name: "Physically mapped flash",
-+	size: WINDOW_SIZE,
-+	buswidth: BUSWIDTH,
-+	read8: bcm947xx_map_read8,
-+	read16: bcm947xx_map_read16,
-+	read32: bcm947xx_map_read32,
-+	copy_from: bcm947xx_map_copy_from,
-+	write8: bcm947xx_map_write8,
-+	write16: bcm947xx_map_write16,
-+	write32: bcm947xx_map_write32,
-+	copy_to: bcm947xx_map_copy_to
-+};
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+
-+static struct mtd_partition bcm947xx_parts[] = {
-+	{ name: "cfe",	offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
-+	{ name: "linux", offset: 0, size: 0, },
-+	{ name: "rootfs", offset: 0, size: 0, },
-+	{ name: "nvram", offset: 0, size: 0, },
-+	{ name: "OpenWrt", offset: 0, size: 0, },
-+	{ name: NULL, },
-+};
-+
-+static int __init
-+find_cfe_size(struct mtd_info *mtd, size_t size)
-+{
-+	struct trx_header *trx;
-+	unsigned char buf[512];
-+	int off;
-+	size_t len;
-+	int blocksize;
-+
-+	trx = (struct trx_header *) buf;
-+
-+	blocksize = mtd->erasesize;
-+	if (blocksize < 0x10000)
-+		blocksize = 0x10000;
-+
-+	for (off = (128*1024); off < size; off += blocksize) {
-+		memset(buf, 0xe5, sizeof(buf));
-+
-+		/*
-+		 * Read into buffer 
-+		 */
-+		if (MTD_READ(mtd, off, sizeof(buf), &len, buf) ||
-+		    len != sizeof(buf))
-+			continue;
-+
-+		/* found a TRX header */
-+		if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
-+			goto done;
-+		}
-+	}
-+
-+	printk(KERN_NOTICE
-+	       "%s: Couldn't find bootloader size\n",
-+	       mtd->name);
-+	return -1;
-+
-+ done:
-+	printk(KERN_NOTICE "bootloader size: %d\n", off);
-+	return off;
-+
-+}
-+
-+static int __init
-+find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
-+{
-+	struct trx_header *trx;
-+	unsigned char buf[512];
-+	int off;
-+	size_t len;
-+	int blocksize;
-+
-+	trx = (struct trx_header *) buf;
-+
-+	blocksize = mtd->erasesize;
-+	if (blocksize < 0x10000)
-+		blocksize = 0x10000;
-+
-+	for (off = (128*1024); off < size; off += blocksize) {
-+		memset(buf, 0xe5, sizeof(buf));
-+
-+		/*
-+		 * Read into buffer 
-+		 */
-+		if (MTD_READ(mtd, off, sizeof(buf), &len, buf) ||
-+		    len != sizeof(buf))
-+			continue;
-+
-+		/* found a TRX header */
-+		if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
-+			part->offset = le32_to_cpu(trx->offsets[2]) ? : 
-+				le32_to_cpu(trx->offsets[1]);
-+			part->size = le32_to_cpu(trx->len); 
-+
-+			part->size -= part->offset;
-+			part->offset += off;
-+
-+			goto done;
-+		}
-+	}
-+
-+	printk(KERN_NOTICE
-+	       "%s: Couldn't find root filesystem\n",
-+	       mtd->name);
-+	return -1;
-+
-+ done:
-+	return part->size;
-+}
-+
-+struct mtd_partition * __init
-+init_mtd_partitions(struct mtd_info *mtd, size_t size)
-+{
-+
-+	int cfe_size;
-+
-+	cfe_size = find_cfe_size(mtd,size); 
-+
-+	/* boot loader */
-+	bcm947xx_parts[0].offset = 0;
-+	bcm947xx_parts[0].size   = cfe_size;
-+
-+	/* nvram */
-+	if (cfe_size != 384 * 1024) {
-+		bcm947xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize);
-+		bcm947xx_parts[3].size   = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
-+	} else {
-+		/* nvram (old 128kb config partition on netgear wgt634u) */
-+		bcm947xx_parts[3].offset = bcm947xx_parts[0].size;
-+		bcm947xx_parts[3].size   = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
-+	}
-+
-+	/* linux (kernel and rootfs) */
-+	if (cfe_size != 384 * 1024) {
-+		bcm947xx_parts[1].offset = bcm947xx_parts[0].size;
-+		bcm947xx_parts[1].size   = bcm947xx_parts[3].offset - 
-+			bcm947xx_parts[1].offset;
-+	} else {
-+		/* do not count the elf loader, which is on one block */
-+		bcm947xx_parts[1].offset = bcm947xx_parts[0].size + 
-+			bcm947xx_parts[3].size + mtd->erasesize;
-+		bcm947xx_parts[1].size   = size - 
-+			bcm947xx_parts[0].size - 
-+			(2*bcm947xx_parts[3].size) - 
-+			mtd->erasesize;
-+	}
-+
-+	/* find and size rootfs */
-+	if (find_root(mtd,size,&bcm947xx_parts[2])==0) {
-+		/* entirely jffs2 */
-+		bcm947xx_parts[4].name = NULL;
-+		bcm947xx_parts[2].size = size - bcm947xx_parts[2].offset - 
-+				bcm947xx_parts[3].size;
-+	} else {
-+		/* legacy setup */
-+		/* calculate leftover flash, and assign it to the jffs2 partition */
-+		if (cfe_size != 384 * 1024) {
-+			bcm947xx_parts[4].offset = bcm947xx_parts[2].offset + 
-+				bcm947xx_parts[2].size;
-+			if ((bcm947xx_parts[4].offset % mtd->erasesize) > 0) {
-+				bcm947xx_parts[4].offset += mtd->erasesize - 
-+					(bcm947xx_parts[4].offset % mtd->erasesize);
-+			}
-+			bcm947xx_parts[4].size = bcm947xx_parts[3].offset - 
-+				bcm947xx_parts[4].offset;
-+		} else {
-+			bcm947xx_parts[4].offset = bcm947xx_parts[2].offset + 
-+				bcm947xx_parts[2].size;
-+			if ((bcm947xx_parts[4].offset % mtd->erasesize) > 0) {
-+				bcm947xx_parts[4].offset += mtd->erasesize - 
-+					(bcm947xx_parts[4].offset % mtd->erasesize);
-+			}
-+			bcm947xx_parts[4].size = size - bcm947xx_parts[3].size - 
-+				bcm947xx_parts[4].offset;
-+		}
-+	}
-+
-+	return bcm947xx_parts;
-+}
-+
-+#endif
-+
-+
-+mod_init_t init_bcm947xx_map(void)
-+{
-+	ulong flags;
-+ 	uint coreidx;
-+	chipcregs_t *cc;
-+	uint32 fltype;
-+	uint window_addr = 0, window_size = 0;
-+	size_t size;
-+	int ret = 0;
-+#ifdef CONFIG_MTD_PARTITIONS
-+	struct mtd_partition *parts;
-+	int i;
-+#endif
-+
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	coreidx = sb_coreidx(sbh);
-+
-+	/* Check strapping option if chipcommon exists */
-+	if ((cc = sb_setcore(sbh, SB_CC, 0))) {
-+		fltype = readl(&cc->capabilities) & CAP_FLASH_MASK;
-+		if (fltype == PFLASH) {
-+			bcm947xx_map.map_priv_2 = 1;
-+			window_addr = 0x1c000000;
-+			bcm947xx_map.size = window_size = 32 * 1024 * 1024;
-+			if ((readl(&cc->flash_config) & CC_CFG_DS) == 0)
-+				bcm947xx_map.buswidth = 1;
-+		}
-+	} else {
-+		fltype = PFLASH;
-+		bcm947xx_map.map_priv_2 = 0;
-+		window_addr = WINDOW_ADDR;
-+		window_size = WINDOW_SIZE;
-+	}
-+
-+	sb_setcoreidx(sbh, coreidx);
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+
-+	if (fltype != PFLASH) {
-+		printk(KERN_ERR "pflash: found no supported devices\n");
-+		ret = -ENODEV;
-+		goto fail;
-+	}
-+
-+	bcm947xx_map.map_priv_1 = (unsigned long) ioremap(window_addr, window_size);
-+
-+	if (!bcm947xx_map.map_priv_1) {
-+		printk(KERN_ERR "Failed to ioremap\n");
-+		return -EIO;
-+	}
-+
-+	if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) {
-+		printk(KERN_ERR "pflash: cfi_probe failed\n");
-+		iounmap((void *)bcm947xx_map.map_priv_1);
-+		return -ENXIO;
-+	}
-+
-+	bcm947xx_mtd->module = THIS_MODULE;
-+
-+	size = bcm947xx_mtd->size;
-+
-+	printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, window_addr);
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+	parts = init_mtd_partitions(bcm947xx_mtd, size);
-+	for (i = 0; parts[i].name; i++);
-+	ret = add_mtd_partitions(bcm947xx_mtd, parts, i);
-+	if (ret) {
-+		printk(KERN_ERR "Flash: add_mtd_partitions failed\n");
-+		goto fail;
-+	}
-+#endif
-+
-+	return 0;
-+
-+ fail:
-+	if (bcm947xx_mtd)
-+		map_destroy(bcm947xx_mtd);
-+	if (bcm947xx_map.map_priv_1)
-+		iounmap((void *) bcm947xx_map.map_priv_1);
-+	bcm947xx_map.map_priv_1 = 0;
-+	return ret;
-+}
-+
-+mod_exit_t cleanup_bcm947xx_map(void)
-+{
-+#ifdef CONFIG_MTD_PARTITIONS
-+	del_mtd_partitions(bcm947xx_mtd);
-+#endif
-+	map_destroy(bcm947xx_mtd);
-+	iounmap((void *) bcm947xx_map.map_priv_1);
-+	bcm947xx_map.map_priv_1 = 0;
-+}
-+
-+module_init(init_bcm947xx_map);
-+module_exit(cleanup_bcm947xx_map);
-diff -Nur linux-2.4.32/drivers/mtd/maps/Config.in linux-2.4.32-flash/drivers/mtd/maps/Config.in
---- linux-2.4.32/drivers/mtd/maps/Config.in	2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.32-flash/drivers/mtd/maps/Config.in	2006-01-31 22:03:50.000000000 +0100
-@@ -48,6 +48,7 @@
- fi
- 
- if [ "$CONFIG_MIPS" = "y" ]; then
-+   dep_tristate '  CFI Flash device mapped on Broadcom BCM947XX boards' CONFIG_MTD_BCM947XX $CONFIG_MTD_CFI
-    dep_tristate '  Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
-    dep_tristate '  Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
-    dep_tristate '  Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100
-diff -Nur linux-2.4.32/drivers/mtd/maps/Makefile linux-2.4.32-flash/drivers/mtd/maps/Makefile
---- linux-2.4.32/drivers/mtd/maps/Makefile	2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.32-flash/drivers/mtd/maps/Makefile	2006-01-31 22:03:50.000000000 +0100
-@@ -3,6 +3,8 @@
- #
- # $Id: Makefile,v 1.37 2003/01/24 14:26:38 dwmw2 Exp $
- 
-+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
-+
- BELOW25		:= $(shell echo $(PATCHLEVEL) | sed s/[1234]/y/)
- 
- ifeq ($(BELOW25),y)
-@@ -10,6 +12,7 @@
- endif
- 
- # Chip mappings
-+obj-$(CONFIG_MTD_BCM947XX)	+= bcm947xx-flash.o
- obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
- obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
- obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
diff --git a/openwrt/target/linux/brcm-2.4/patches/005-bluetooth_sco_buffer_align.patch b/openwrt/target/linux/brcm-2.4/patches/005-bluetooth_sco_buffer_align.patch
deleted file mode 100644
index 77ade1c8b2..0000000000
--- a/openwrt/target/linux/brcm-2.4/patches/005-bluetooth_sco_buffer_align.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- linux-2.4.30/drivers/bluetooth/hci_usb.c	2004-08-08 01:26:04.000000000 +0200
-+++ linux-2.4.30/drivers/bluetooth/hci_usb.c	2005-07-25 20:12:11.000000000 +0200
-@@ -259,6 +259,9 @@
- 	void *buf;
- 
- 	mtu  = husb->isoc_in_ep->wMaxPacketSize;
-+#ifdef CONFIG_BCM4710
-+	mtu = (mtu + 1) & ~1;		/* brcm: isoc buffers must be aligned on word boundary */
-+#endif
-         size = mtu * HCI_MAX_ISOC_FRAMES;
- 
- 	buf = kmalloc(size, GFP_ATOMIC);
diff --git a/openwrt/target/linux/brcm-2.4/patches/006-ide_workaround.patch b/openwrt/target/linux/brcm-2.4/patches/006-ide_workaround.patch
deleted file mode 100644
index 9f8d2ee29d..0000000000
--- a/openwrt/target/linux/brcm-2.4/patches/006-ide_workaround.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-diff -urN linux.old/arch/mips/lib/ide-std.c linux.dev/arch/mips/lib/ide-std.c
---- linux.old/arch/mips/lib/ide-std.c	2003-08-25 13:44:40.000000000 +0200
-+++ linux.dev/arch/mips/lib/ide-std.c	2005-08-12 23:55:23.886963936 +0200
-@@ -31,12 +31,14 @@
- static ide_ioreg_t std_ide_default_io_base(int index)
- {
- 	switch (index) {
-+#if 0
- 		case 0:	return 0x1f0;
- 		case 1:	return 0x170;
- 		case 2: return 0x1e8;
- 		case 3: return 0x168;
- 		case 4: return 0x1e0;
- 		case 5: return 0x160;
-+#endif
- 		default:
- 			return 0;
- 	}
diff --git a/openwrt/target/linux/brcm-2.4/patches/007-sched_use_tsc.patch b/openwrt/target/linux/brcm-2.4/patches/007-sched_use_tsc.patch
deleted file mode 100644
index 5b64310738..0000000000
--- a/openwrt/target/linux/brcm-2.4/patches/007-sched_use_tsc.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-diff -urN linux.old/arch/mips/kernel/time.c linux.dev/arch/mips/kernel/time.c
---- linux.old/arch/mips/kernel/time.c	2005-11-14 11:06:38.661262000 +0100
-+++ linux.dev/arch/mips/kernel/time.c	2005-11-15 20:02:50.059676750 +0100
-@@ -151,6 +151,27 @@
- unsigned int (*mips_hpt_read)(void);
- void (*mips_hpt_init)(unsigned int);
- 
-+extern __u32 get_htscl(void)
-+{
-+	return timerhi;
-+}
-+
-+static __u64 tscll_last = 0;
-+
-+extern __u64 get_tscll(void)
-+{
-+	__u64 h = (__u64) timerhi;
-+	__u32 c = read_c0_count();
-+
-+	h <<= 32;
-+	h += c;
-+
-+	while (h < tscll_last)
-+		h += (((__u64) 1) << 32);
-+
-+	tscll_last = h;
-+	return h;	
-+}
- 
- /*
-  * timeofday services, for syscalls.
-@@ -761,3 +782,5 @@
- EXPORT_SYMBOL(to_tm);
- EXPORT_SYMBOL(rtc_set_time);
- EXPORT_SYMBOL(rtc_get_time);
-+EXPORT_SYMBOL(get_htscl);
-+EXPORT_SYMBOL(get_tscll);
-diff -urN linux.old/include/asm-mips/timex.h linux.dev/include/asm-mips/timex.h
---- linux.old/include/asm-mips/timex.h	2005-11-14 11:06:38.685263500 +0100
-+++ linux.dev/include/asm-mips/timex.h	2005-11-14 11:02:21.069163500 +0100
-@@ -31,6 +31,19 @@
- 	return read_c0_count();
- }
- 
-+extern __u32 get_htscl(void);
-+extern __u64 get_tscll(void);
-+
-+#define rdtsc(low, high) \
-+		high = get_htscl(); \
-+		low = read_c0_count();
-+
-+#define rdtscl(low) \
-+		low = read_c0_count();
-+
-+#define rdtscll(val) \
-+		val = get_tscll();
-+
- #define vxtime_lock()		do {} while (0)
- #define vxtime_unlock()		do {} while (0)
- 
-diff -urN linux.old/include/net/pkt_sched.h linux.dev/include/net/pkt_sched.h
---- linux.old/include/net/pkt_sched.h	2005-11-14 11:06:38.709265000 +0100
-+++ linux.dev/include/net/pkt_sched.h	2005-11-14 11:02:21.069163500 +0100
-@@ -5,7 +5,11 @@
- #define PSCHED_JIFFIES 		2
- #define PSCHED_CPU 		3
- 
-+#ifdef __mips__
-+#define PSCHED_CLOCK_SOURCE	PSCHED_CPU
-+#else
- #define PSCHED_CLOCK_SOURCE	PSCHED_JIFFIES
-+#endif
- 
- #include <linux/config.h>
- #include <linux/types.h>
-@@ -271,7 +275,7 @@
- #define PSCHED_US2JIFFIE(delay) (((delay)+psched_clock_per_hz-1)/psched_clock_per_hz)
- #define PSCHED_JIFFIE2US(delay) ((delay)*psched_clock_per_hz)
- 
--#ifdef CONFIG_X86_TSC
-+#if defined(CONFIG_X86_TSC) || defined(__mips__)
- 
- #define PSCHED_GET_TIME(stamp) \
- ({ u64 __cur; \
diff --git a/openwrt/target/linux/brcm-2.4/patches/008-b44_bcm47xx_support.patch b/openwrt/target/linux/brcm-2.4/patches/008-b44_bcm47xx_support.patch
deleted file mode 100644
index 35c80acd25..0000000000
--- a/openwrt/target/linux/brcm-2.4/patches/008-b44_bcm47xx_support.patch
+++ /dev/null
@@ -1,585 +0,0 @@
-diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
---- linux.old/drivers/net/b44.c	2006-02-12 13:49:59.000000000 +0100
-+++ linux.dev/drivers/net/b44.c	2006-03-06 22:37:14.000000000 +0100
-@@ -1,7 +1,9 @@
- /* b44.c: Broadcom 4400 device driver.
-  *
-  * Copyright (C) 2002 David S. Miller (davem@redhat.com)
-- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
-+ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi)
-+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ * Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org)
-  *
-  * Distribute under GPL.
-  */
-@@ -25,6 +27,41 @@
- 
- #include "b44.h"
- 
-+#include <typedefs.h>
-+#include <bcmdevs.h>
-+#include <bcmutils.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmnvram.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <sflash.h>
-+
-+#ifdef CONFIG_BCM947XX
-+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
-+ 
-+static inline void e_aton(char *str, char *dest)
-+{
-+	int i = 0;
-+	u16 *d = (u16 *) dest;
-+
-+	if (str == NULL) {
-+		memset(dest, 0, 6);
-+		return;
-+	}
-+	
-+	for (;;) {
-+		dest[i++] = (char) simple_strtoul(str, NULL, 16);
-+		str += 2;
-+		if (!*str++ || i == 6)
-+			break;
-+	}
-+}
-+
-+static int instance = 0;
-+#endif
-+
-+
- #define DRV_MODULE_NAME		"b44"
- #define PFX DRV_MODULE_NAME	": "
- #define DRV_MODULE_VERSION	"0.93"
-@@ -75,7 +112,7 @@
- 	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
- 
- MODULE_AUTHOR("David S. Miller (davem@redhat.com)");
--MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver");
-+MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver");
- MODULE_LICENSE("GPL");
- MODULE_PARM(b44_debug, "i");
- MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value");
-@@ -89,6 +126,8 @@
- 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
- 	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1,
- 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4713,
-+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
- 	{ }	/* terminate list with empty entry */
- };
- 
-@@ -113,11 +152,13 @@
- 		udelay(10);
- 	}
- 	if (i == timeout) {
-+#ifdef DEBUG
- 		printk(KERN_ERR PFX "%s: BUG!  Timeout waiting for bit %08x of register "
- 		       "%lx to %s.\n",
- 		       bp->dev->name,
- 		       bit, reg,
- 		       (clear ? "clear" : "set"));
-+#endif
- 		return -ENODEV;
- 	}
- 	return 0;
-@@ -236,6 +277,8 @@
- 	udelay(1);
- }
- 
-+static int b44_4713_instance;
-+
- static int ssb_core_unit(struct b44 *bp)
- {
- #if 0
-@@ -258,6 +301,9 @@
- 		break;
- 	};
- #endif
-+	if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
-+		return b44_4713_instance++;
-+	else
- 	return 0;
- }
- 
-@@ -267,6 +313,28 @@
- 		== SBTMSLOW_CLOCK);
- }
- 
-+static inline void __b44_cam_read(struct b44 *bp, unsigned char *data, int index)
-+{
-+	u32 val;
-+
-+	bw32(B44_CAM_CTRL, (CAM_CTRL_READ |
-+			    (index << CAM_CTRL_INDEX_SHIFT)));
-+
-+	b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);
-+
-+	val = br32(B44_CAM_DATA_LO);
-+
-+	data[2] = (val >> 24) & 0xFF;
-+	data[3] = (val >> 16) & 0xFF;
-+	data[4] = (val >> 8) & 0xFF;
-+	data[5] = (val >> 0) & 0xFF;
-+
-+	val = br32(B44_CAM_DATA_HI);
-+
-+	data[0] = (val >> 8) & 0xFF;
-+	data[1] = (val >> 0) & 0xFF;
-+}
-+
- static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
- {
- 	u32 val;
-@@ -287,7 +355,7 @@
- 
- static inline void __b44_disable_ints(struct b44 *bp)
- {
--	bw32(B44_IMASK, 0);
-+	bw32(B44_IMASK, ISTAT_TO); /* leave the timeout interrupt active */
- }
- 
- static void b44_disable_ints(struct b44 *bp)
-@@ -303,14 +371,14 @@
- 	bw32(B44_IMASK, bp->imask);
- }
- 
--static int b44_readphy(struct b44 *bp, int reg, u32 *val)
-+static int __b44_readphy(struct b44 *bp, int phy_addr, int reg, u32 *val)
- {
- 	int err;
- 
- 	bw32(B44_EMAC_ISTAT, EMAC_INT_MII);
- 	bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START |
- 			     (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) |
--			     (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+			     (phy_addr << MDIO_DATA_PMD_SHIFT) |
- 			     (reg << MDIO_DATA_RA_SHIFT) |
- 			     (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
- 	err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
-@@ -319,23 +387,42 @@
- 	return err;
- }
- 
--static int b44_writephy(struct b44 *bp, int reg, u32 val)
-+static int b44_readphy(struct b44 *bp, int reg, u32 *val)
-+{
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+		return 0;
-+
-+	return __b44_readphy(bp, bp->phy_addr, reg, val);
-+}
-+
-+static int __b44_writephy(struct b44 *bp, int phy_addr, int reg, u32 val)
- {
- 	bw32(B44_EMAC_ISTAT, EMAC_INT_MII);
- 	bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START |
- 			     (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) |
--			     (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+			     (phy_addr << MDIO_DATA_PMD_SHIFT) |
- 			     (reg << MDIO_DATA_RA_SHIFT) |
- 			     (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) |
- 			     (val & MDIO_DATA_DATA)));
- 	return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
- }
- 
-+static int b44_writephy(struct b44 *bp, int reg, u32 val)
-+{
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+		return 0;
-+		
-+	return __b44_writephy(bp, bp->phy_addr, reg, val);
-+}
-+
- static int b44_phy_reset(struct b44 *bp)
- {
- 	u32 val;
- 	int err;
- 
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+		return 0;
-+
- 	err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
- 	if (err)
- 		return err;
-@@ -406,6 +493,23 @@
- 	u32 val;
- 	int err;
- 
-+
-+	/*
-+	 * workaround for bad hardware design in Linksys WAP54G v1.0
-+	 * see https://dev.openwrt.org/ticket/146
-+	 * check and reset bit "isolate"
-+	 */
-+	if ((bp->pdev->device == PCI_DEVICE_ID_BCM4713) &&
-+			(atoi(nvram_get("boardnum")) == 2) &&
-+			(__b44_readphy(bp, 0, MII_BMCR, &val) == 0) && 
-+			(val & BMCR_ISOLATE) &&
-+			(__b44_writephy(bp, 0, MII_BMCR, val & ~BMCR_ISOLATE) != 0)) {
-+		printk(KERN_WARNING PFX "PHY: cannot reset MII transceiver isolate bit.\n");
-+	}
-+	
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+		return 0;
-+
- 	if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
- 		goto out;
- 	if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
-@@ -498,6 +602,19 @@
- {
- 	u32 bmsr, aux;
- 
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) {
-+		bp->flags |= B44_FLAG_100_BASE_T;
-+		bp->flags |= B44_FLAG_FULL_DUPLEX;
-+		if (!netif_carrier_ok(bp->dev)) {
-+			u32 val = br32(B44_TX_CTRL);
-+			val |= TX_CTRL_DUPLEX;
-+			bw32(B44_TX_CTRL, val);
-+			netif_carrier_on(bp->dev);
-+			b44_link_report(bp);
-+		}
-+		return;
-+	}
-+
- 	if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
- 	    !b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
- 	    (bmsr != 0xffff)) {
-@@ -765,6 +882,25 @@
- 	return received;
- }
- 
-+
-+static inline void __b44_reset(struct b44 *bp)
-+{
-+	spin_lock_irq(&bp->lock);
-+	b44_halt(bp);
-+	b44_init_rings(bp);
-+	b44_init_hw(bp);
-+	spin_unlock_irq(&bp->lock);
-+
-+	b44_enable_ints(bp);
-+	netif_wake_queue(bp->dev);
-+}
-+
-+static inline void __b44_set_timeout(struct b44 *bp, int timeout)
-+{
-+	/* Set timeout for Rx to two seconds after the last Tx */
-+	bw32(B44_GPTIMER, timeout ? 2 * 125000000 : 0);
-+}
-+
- static int b44_poll(struct net_device *netdev, int *budget)
- {
- 	struct b44 *bp = netdev->priv;
-@@ -772,13 +908,13 @@
- 
- 	spin_lock_irq(&bp->lock);
- 
--	if (bp->istat & (ISTAT_TX | ISTAT_TO)) {
-+	if (bp->istat & ISTAT_TX) {
- 		/* spin_lock(&bp->tx_lock); */
- 		b44_tx(bp);
- 		/* spin_unlock(&bp->tx_lock); */
- 	}
- 	spin_unlock_irq(&bp->lock);
--
-+	
- 	done = 1;
- 	if (bp->istat & ISTAT_RX) {
- 		int orig_budget = *budget;
-@@ -796,24 +932,18 @@
- 			done = 0;
- 	}
- 
--	if (bp->istat & ISTAT_ERRORS) {
--		spin_lock_irq(&bp->lock);
--		b44_halt(bp);
--		b44_init_rings(bp);
--		b44_init_hw(bp);
--		netif_wake_queue(bp->dev);
--		spin_unlock_irq(&bp->lock);
--		done = 1;
--	}
--
- 	if (done) {
- 		netif_rx_complete(netdev);
- 		b44_enable_ints(bp);
- 	}
- 
-+	if ((bp->core_unit == 1) && (bp->istat & (ISTAT_TX | ISTAT_RX)))
-+		__b44_set_timeout(bp, (bp->istat & ISTAT_TX) ? 1 : 0);
-+
- 	return (done ? 0 : 1);
- }
- 
-+
- static irqreturn_t b44_interrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
- 	struct net_device *dev = dev_id;
-@@ -832,6 +962,18 @@
- 	 */
- 	istat &= imask;
- 	if (istat) {
-+		/* Workaround for the WL-500g WAN port hang */
-+		if (istat & (ISTAT_TO | ISTAT_ERRORS)) {
-+			/*
-+			 * no rx before the watchdog timeout
-+			 * reset the interface
-+			 */
-+			__b44_reset(bp);
-+		} 
-+		
-+		if ((bp->core_unit == 1) && (bp->istat & (ISTAT_TX | ISTAT_RX)))
-+			__b44_set_timeout(bp, (bp->istat & ISTAT_TX) ? 1 : 0);
-+
- 		handled = 1;
- 		if (netif_rx_schedule_prep(dev)) {
- 			/* NOTE: These writes are posted by the readback of
-@@ -848,6 +990,7 @@
- 		bw32(B44_ISTAT, istat);
- 		br32(B44_ISTAT);
- 	}
-+
- 	spin_unlock_irqrestore(&bp->lock, flags);
- 	return IRQ_RETVAL(handled);
- }
-@@ -859,16 +1002,7 @@
- 	printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
- 	       dev->name);
- 
--	spin_lock_irq(&bp->lock);
--
--	b44_halt(bp);
--	b44_init_rings(bp);
--	b44_init_hw(bp);
--
--	spin_unlock_irq(&bp->lock);
--
--	b44_enable_ints(bp);
--
-+	__b44_reset(bp);
- 	netif_wake_queue(dev);
- }
- 
-@@ -1092,6 +1226,8 @@
- /* bp->lock is held. */
- static void b44_chip_reset(struct b44 *bp)
- {
-+	unsigned int sb_clock;
-+
- 	if (ssb_is_core_up(bp)) {
- 		bw32(B44_RCV_LAZY, 0);
- 		bw32(B44_ENET_CTRL, ENET_CTRL_DISABLE);
-@@ -1105,9 +1241,10 @@
- 		bw32(B44_DMARX_CTRL, 0);
- 		bp->rx_prod = bp->rx_cons = 0;
- 	} else {
--		ssb_pci_setup(bp, (bp->core_unit == 0 ?
--				   SBINTVEC_ENET0 :
--				   SBINTVEC_ENET1));
-+		/*if (bp->pdev->device != PCI_DEVICE_ID_BCM4713)*/
-+			ssb_pci_setup(bp, (bp->core_unit == 0 ?
-+				   	SBINTVEC_ENET0 :
-+				   	SBINTVEC_ENET1));
- 	}
- 
- 	ssb_core_reset(bp);
-@@ -1115,6 +1252,11 @@
- 	b44_clear_stats(bp);
- 
- 	/* Make PHY accessible. */
-+	if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
-+		sb_clock = 100000000; /* 100 MHz */
-+	else
-+		sb_clock = 62500000; /* 62.5 MHz */
-+
- 	bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
- 			     (0x0d & MDIO_CTRL_MAXF_MASK)));
- 	br32(B44_MDIO_CTRL);
-@@ -1215,6 +1357,8 @@
- 	struct b44 *bp = dev->priv;
- 	int err;
- 
-+	netif_carrier_off(dev);
-+
- 	err = b44_alloc_consistent(bp);
- 	if (err)
- 		return err;
-@@ -1235,9 +1379,10 @@
- 	bp->timer.expires = jiffies + HZ;
- 	bp->timer.data = (unsigned long) bp;
- 	bp->timer.function = b44_timer;
--	add_timer(&bp->timer);
-+	b44_timer((unsigned long) bp);
- 
- 	b44_enable_ints(bp);
-+	netif_start_queue(dev);
- 
- 	return 0;
- 
-@@ -1628,7 +1773,7 @@
- 		u32 mii_regval;
- 
- 		spin_lock_irq(&bp->lock);
--		err = b44_readphy(bp, data->reg_num & 0x1f, &mii_regval);
-+		err = __b44_readphy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
- 		spin_unlock_irq(&bp->lock);
- 
- 		data->val_out = mii_regval;
-@@ -1641,7 +1786,7 @@
- 			return -EPERM;
- 
- 		spin_lock_irq(&bp->lock);
--		err = b44_writephy(bp, data->reg_num & 0x1f, data->val_in);
-+		err = __b44_writephy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
- 		spin_unlock_irq(&bp->lock);
- 
- 		return err;
-@@ -1668,21 +1813,52 @@
- static int __devinit b44_get_invariants(struct b44 *bp)
- {
- 	u8 eeprom[128];
-+	u8 buf[32];
- 	int err;
-+	unsigned long flags;
- 
--	err = b44_read_eeprom(bp, &eeprom[0]);
--	if (err)
--		goto out;
--
--	bp->dev->dev_addr[0] = eeprom[79];
--	bp->dev->dev_addr[1] = eeprom[78];
--	bp->dev->dev_addr[2] = eeprom[81];
--	bp->dev->dev_addr[3] = eeprom[80];
--	bp->dev->dev_addr[4] = eeprom[83];
--	bp->dev->dev_addr[5] = eeprom[82];
--
--	bp->phy_addr = eeprom[90] & 0x1f;
--	bp->mdc_port = (eeprom[90] >> 14) & 0x1;
-+	if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) {
-+#ifdef CONFIG_BCM947XX
-+		sprintf(buf, "et%dmacaddr", instance - 1);
-+		e_aton(nvram_get(buf), bp->dev->dev_addr);
-+
-+		sprintf(buf, "et%dphyaddr", instance - 1);
-+		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+#else
-+		/*
-+		 * BCM47xx boards don't have a EEPROM. The MAC is stored in
-+		 * a NVRAM area somewhere in the flash memory. As we don't
-+		 * know the location and/or the format of the NVRAM area
-+		 * here, we simply rely on the bootloader to write the
-+		 * MAC into the CAM.
-+		 */
-+		spin_lock_irqsave(&bp->lock, flags);
-+		__b44_cam_read(bp, bp->dev->dev_addr, 0);
-+		spin_unlock_irqrestore(&bp->lock, flags);
-+
-+		/*
-+		 * BCM47xx boards don't have a PHY. Usually there is a switch
-+		 * chip with multiple PHYs connected to the PHY port.
-+		 */
-+		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+#endif
-+		bp->dma_offset = 0;
-+	} else {
-+		err = b44_read_eeprom(bp, &eeprom[0]);
-+		if (err)
-+			return err;
-+
-+		bp->dev->dev_addr[0] = eeprom[79];
-+		bp->dev->dev_addr[1] = eeprom[78];
-+		bp->dev->dev_addr[2] = eeprom[81];
-+		bp->dev->dev_addr[3] = eeprom[80];
-+		bp->dev->dev_addr[4] = eeprom[83];
-+		bp->dev->dev_addr[5] = eeprom[82];
-+
-+		bp->phy_addr = eeprom[90] & 0x1f;
-+		bp->dma_offset = SB_PCI_DMA;
-+		bp->mdc_port = (eeprom[90] >> 14) & 0x1;
-+	}
- 
- 	/* With this, plus the rx_header prepended to the data by the
- 	 * hardware, we'll land the ethernet header on a 2-byte boundary.
-@@ -1692,13 +1868,12 @@
- 	bp->imask = IMASK_DEF;
- 
- 	bp->core_unit = ssb_core_unit(bp);
--	bp->dma_offset = ssb_get_addr(bp, SBID_PCI_DMA, 0);
- 
- 	/* XXX - really required? 
- 	   bp->flags |= B44_FLAG_BUGGY_TXPTR;
-          */
--out:
--	return err;
-+
-+	return 0;
- }
- 
- static int __devinit b44_init_one(struct pci_dev *pdev,
-@@ -1710,6 +1885,10 @@
- 	struct b44 *bp;
- 	int err, i;
- 
-+#ifdef CONFIG_BCM947XX
-+	instance++;
-+#endif
-+
- 	if (b44_version_printed++ == 0)
- 		printk(KERN_INFO "%s", version);
- 
-@@ -1819,11 +1998,17 @@
- 
- 	pci_save_state(bp->pdev, bp->pci_cfg_state);
- 
--	printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
-+	printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name,
-+		(pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400");
- 	for (i = 0; i < 6; i++)
- 		printk("%2.2x%c", dev->dev_addr[i],
- 		       i == 5 ? '\n' : ':');
- 
-+	/* Initialize phy */
-+	spin_lock_irq(&bp->lock);
-+	b44_chip_reset(bp);
-+	spin_unlock_irq(&bp->lock);
-+	
- 	return 0;
- 
- err_out_iounmap:
-diff -urN linux.old/drivers/net/b44.h linux.dev/drivers/net/b44.h
---- linux.old/drivers/net/b44.h	2006-02-12 13:49:59.000000000 +0100
-+++ linux.dev/drivers/net/b44.h	2006-01-24 20:52:08.000000000 +0100
-@@ -229,8 +229,6 @@
- #define  SBIPSFLAG_IMASK4	0x3f000000 /* Which sbflags --> mips interrupt 4 */
- #define  SBIPSFLAG_ISHIFT4	24
- #define B44_SBTPSFLAG	0x0F18UL /* SB Target Port OCP Slave Flag */
--#define  SBTPS_NUM0_MASK	0x0000003f
--#define  SBTPS_F0EN0		0x00000040
- #define B44_SBADMATCH3	0x0F60UL /* SB Address Match 3 */
- #define B44_SBADMATCH2	0x0F68UL /* SB Address Match 2 */
- #define B44_SBADMATCH1	0x0F70UL /* SB Address Match 1 */
-@@ -461,6 +459,8 @@
- };
- 
- #define B44_MCAST_TABLE_SIZE	32
-+#define B44_PHY_ADDR_NO_PHY	30
-+#define B44_MDC_RATIO		5000000
- 
- /* SW copy of device statistics, kept up to date by periodic timer
-  * which probes HW values.  Must have same relative layout as HW
-diff -urN linux.old/include/linux/pci_ids.h linux.dev/include/linux/pci_ids.h
---- linux.old/include/linux/pci_ids.h	2006-02-12 13:49:59.000000000 +0100
-+++ linux.dev/include/linux/pci_ids.h	2006-01-24 20:52:08.000000000 +0100
-@@ -1735,6 +1735,7 @@
- #define PCI_DEVICE_ID_TIGON3_5901_2	0x170e
- #define PCI_DEVICE_ID_BCM4401		0x4401
- #define PCI_DEVICE_ID_BCM4401B0		0x4402
-+#define PCI_DEVICE_ID_BCM4713		0x4713
- 
- #define PCI_VENDOR_ID_ENE		0x1524
- #define PCI_DEVICE_ID_ENE_1211		0x1211
diff --git a/openwrt/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch b/openwrt/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch
deleted file mode 100644
index 0759eeb40e..0000000000
--- a/openwrt/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-diff -urN linux.old/arch/mips/bcm947xx/pcibios.c linux.dev/arch/mips/bcm947xx/pcibios.c
---- linux.old/arch/mips/bcm947xx/pcibios.c	2006-04-07 21:20:59.000000000 +0200
-+++ linux.dev/arch/mips/bcm947xx/pcibios.c	2006-04-08 03:17:59.000000000 +0200
-@@ -157,6 +157,7 @@
- 
- static u32 pci_iobase = 0x100;
- static u32 pci_membase = SB_PCI_DMA;
-+static u32 pcmcia_membase = 0x40004000;
- 
- void __init
- pcibios_fixup_bus(struct pci_bus *b)
-@@ -188,7 +189,7 @@
- 			/* Fix up resource bases */
- 			for (pos = 0; pos < 6; pos++) {
- 				res = &d->resource[pos];
--				base = (res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase;
-+				base = (res->flags & IORESOURCE_IO) ? &pci_iobase : ((b->number == 2) ? &pcmcia_membase : &pci_membase);
- 				if (res->end) {
- 					size = res->end - res->start + 1;
-  					if (*base & (size - 1))
-@@ -308,7 +309,12 @@
- 	where = PCI_BASE_ADDRESS_0 + (resource * 4);
- 	size = res->end - res->start;
- 	pci_read_config_dword(dev, where, &reg);
--	reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
-+	
-+	if (dev->bus->number == 1)
-+		reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
-+	else
-+		reg = res->start;
-+
- 	pci_write_config_dword(dev, where, reg);
- }
- 
-diff -urN linux.old/drivers/pcmcia/yenta.c linux.dev/drivers/pcmcia/yenta.c
---- linux.old/drivers/pcmcia/yenta.c	2004-11-17 12:54:21.000000000 +0100
-+++ linux.dev/drivers/pcmcia/yenta.c	2006-04-11 17:47:45.000000000 +0200
-@@ -543,6 +543,9 @@
- 	 * Probe for usable interrupts using the force
- 	 * register to generate bogus card status events.
- 	 */
-+
-+#ifndef CONFIG_BCM947XX
-+	/* WRT54G3G does not like this */
- 	cb_writel(socket, CB_SOCKET_EVENT, -1);
- 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- 	exca_writeb(socket, I365_CSCINT, 0);
-@@ -557,7 +560,8 @@
- 	}
- 	cb_writel(socket, CB_SOCKET_MASK, 0);
- 	exca_writeb(socket, I365_CSCINT, 0);
--	
-+#endif
-+
- 	mask = probe_irq_mask(val) & 0xffff;
- 
- 	bridge_ctrl &= ~CB_BRIDGE_INTR;
-@@ -578,6 +582,12 @@
- 	socket->cap.cb_dev = socket->dev;
- 	socket->cap.bus = NULL;
- 
-+#ifdef CONFIG_BCM947XX
-+	/* irq mask probing is broken for the WRT54G3G */
-+	if (socket->cap.irq_mask == 0)
-+		socket->cap.irq_mask = 0x6f8;
-+#endif
-+
- 	printk(KERN_INFO "Yenta ISA IRQ mask 0x%04x, PCI irq %d\n",
- 	       socket->cap.irq_mask, socket->cb_irq);
- }
-@@ -609,6 +619,15 @@
- 	printk(KERN_INFO "Socket status: %08x\n",
- 	       cb_readl(socket, CB_SOCKET_STATE));
- 
-+	/* Generate an interrupt on card insert/remove */
-+	config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+	/* Set up Multifunction Routing Status Register */
-+	config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+	
-+	/* Switch interrupts to parallelized */
-+	config_writeb(socket, 0x92, 0x64);
-+	
- 	/* Register it with the pcmcia layer.. */
- 	cardbus_register(socket);
- 
-@@ -731,7 +750,7 @@
- {
- 	struct pci_bus *bus;
- 	struct resource *root, *res;
--	u32 start, end;
-+	u32 start = 0, end = 0;
- 	u32 align, size, min, max;
- 	unsigned offset;
- 	unsigned mask;
-@@ -750,6 +769,15 @@
- 	res->end = 0;
- 	root = pci_find_parent_resource(socket->dev, res);
- 
-+#ifdef CONFIG_BCM947XX
-+	/* default mem resources are completely fscked up on the wrt54g3g */
-+	/* bypass the entire resource allocation stuff below and just set it statically */
-+	if (type & IORESOURCE_MEM) {
-+		res->start = 0x40004000;
-+		res->end = res->start + 0x3fff;
-+	}
-+
-+#else
- 	if (!root)
- 		return;
- 
-@@ -794,6 +822,7 @@
- 		res->start = res->end = 0;
- 		return;
- 	}
-+#endif
- 
- 	config_writel(socket, offset, res->start);
- 	config_writel(socket, offset+4, res->end);
diff --git a/openwrt/target/linux/brcm-2.6/Makefile b/openwrt/target/linux/brcm-2.6/Makefile
deleted file mode 100644
index 5926e6ebcd..0000000000
--- a/openwrt/target/linux/brcm-2.6/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-LINUX_VERSION:=2.6.16.7
-LINUX_RELEASE:=1
-LINUX_KERNEL_MD5SUM:=9682b2bd6e02f3087982d7c3f5ba824e
-
-include ../rules.mk
-include ./config
-
-include ../generic-$(KERNEL)/modules.mk
-include ../kernel.mk
-
-
-$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
-	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
-	@$(CP) config $(LINUX_DIR)/.config
-	touch $@
-
diff --git a/openwrt/target/linux/brcm-2.6/config b/openwrt/target/linux/brcm-2.6/config
deleted file mode 100644
index 4a5d98c095..0000000000
--- a/openwrt/target/linux/brcm-2.6/config
+++ /dev/null
@@ -1,1728 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Wed Mar 29 00:13:01 2006
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MACH_JAZZ is not set
-CONFIG_BCM947XX=y
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-CONFIG_IPSEC_NAT_TRAVERSAL=y
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-CONFIG_TCP_CONG_ADVANCED=y
-
-#
-# TCP congestion control
-#
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=m
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=y
-CONFIG_TCP_CONG_SCALABLE=m
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_BRIDGE_NETFILTER is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_SIP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_MATCH_POLICY is not set
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_IMQ=m
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_TTL=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-# CONFIG_IP6_NF_MATCH_POLICY is not set
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_IMQ=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_ATM_BR2684_IPFILTER=y
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_ESFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_NETROM is not set
-# CONFIG_ROSE is not set
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-# CONFIG_6PACK is not set
-# CONFIG_BPQETHER is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_YAM is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_D80211=m
-CONFIG_D80211_DEBUG=y
-CONFIG_D80211_VERBOSE_DEBUG=y
-# CONFIG_TKIP_DEBUG is not set
-# CONFIG_D80211_DEBUG_COUNTERS is not set
-# CONFIG_HOSTAPD_WPA_TESTING is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BCM47XX=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-# CONFIG_IMQ_BEHAVIOR_AA is not set
-# CONFIG_IMQ_BEHAVIOR_AB is not set
-CONFIG_IMQ_BEHAVIOR_BA=y
-# CONFIG_IMQ_BEHAVIOR_BB is not set
-CONFIG_IMQ_NUM_DEVS=2
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-CONFIG_B44=y
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-# CONFIG_IPW2200_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_HOSTAP_CS=m
-CONFIG_BCM43XX_D80211=m
-CONFIG_BCM43XX_D80211_DEBUG=y
-CONFIG_BCM43XX_D80211_DMA=y
-CONFIG_BCM43XX_D80211_PIO=y
-CONFIG_BCM43XX_D80211_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_D80211_DMA_MODE is not set
-# CONFIG_BCM43XX_D80211_PIO_MODE is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA MIPS devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# PCMCIA devices
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_PWC is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-# CONFIG_USB_CXACRU is not set
-CONFIG_USB_UEAGLEATM=m
-# CONFIG_USB_XUSBATM is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_VMALLOC is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/openwrt/target/linux/brcm-2.6/patches/001-bcm947xx.patch b/openwrt/target/linux/brcm-2.6/patches/001-bcm947xx.patch
deleted file mode 100644
index 771ea71b7f..0000000000
--- a/openwrt/target/linux/brcm-2.6/patches/001-bcm947xx.patch
+++ /dev/null
@@ -1,11932 +0,0 @@
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/bcmsrom.c
---- linux-2.6.16/arch/mips/bcm947xx/broadcom/bcmsrom.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/bcmsrom.c	2006-03-21 09:30:59.000000000 +0100
-@@ -0,0 +1,481 @@
-+/*
-+ *  Misc useful routines to access NIC SROM/OTP .
-+ *
-+ * Copyright 2005, Broadcom Corporation      
-+ * All Rights Reserved.      
-+ *       
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
-+ * $Id$
-+ */
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmsrom.h>
-+#include <bcmdevs.h>
-+#include <bcmendian.h>
-+#include <pcicfg.h>
-+#include <sbutils.h>
-+
-+#include <proto/ethernet.h>	/* for sprom content groking */
-+
-+#define	VARS_MAX	4096	/* should be reduced */
-+
-+#define WRITE_ENABLE_DELAY	500	/* 500 ms after write enable/disable toggle */
-+#define WRITE_WORD_DELAY	20	/* 20 ms between each word write */
-+
-+static int initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count);
-+static int sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc);
-+
-+static int initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count);
-+
-+/*
-+ * Initialize local vars from the right source for this platform.
-+ * Return 0 on success, nonzero on error.
-+ */
-+int
-+srom_var_init(void *sbh, uint bustype, void *curmap, osl_t *osh, char **vars, int *count)
-+{
-+	ASSERT(bustype == BUSTYPE(bustype));
-+	if (vars == NULL || count == NULL)
-+		return (0);
-+
-+	switch (BUSTYPE(bustype)) {
-+
-+	case PCI_BUS:
-+		ASSERT(curmap);	/* can not be NULL */
-+		return initvars_srom_pci(sbh, curmap, vars, count);
-+
-+	default:
-+		return 0;
-+	}
-+	return (-1);
-+}
-+
-+/* support only 16-bit word read from srom */
-+int
-+srom_read(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf)
-+{
-+	void *srom;
-+	uint off, nw;
-+
-+	ASSERT(bustype == BUSTYPE(bustype));
-+
-+	/* check input - 16-bit access only */
-+	if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
-+		return 1;
-+
-+	off = byteoff / 2;
-+	nw = nbytes / 2;
-+
-+	if (BUSTYPE(bustype) == PCI_BUS) {
-+		if (!curmap)
-+			return 1;
-+		srom = (uchar*)curmap + PCI_BAR0_SPROM_OFFSET;
-+		if (sprom_read_pci(srom, off, buf, nw, FALSE))
-+			return 1;
-+	} else {
-+		return 1;
-+	}
-+
-+	return 0;
-+}
-+
-+/* support only 16-bit word write into srom */
-+int
-+srom_write(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf)
-+{
-+	uint16 *srom;
-+	uint i, off, nw, crc_range;
-+	uint16 image[SPROM_SIZE], *p;
-+	uint8 crc;
-+	volatile uint32 val32;
-+
-+	ASSERT(bustype == BUSTYPE(bustype));
-+
-+	/* check input - 16-bit access only */
-+	if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
-+		return 1;
-+
-+	crc_range = (((BUSTYPE(bustype) == SDIO_BUS)) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2;
-+
-+	/* if changes made inside crc cover range */
-+	if (byteoff < crc_range) {
-+		nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2;
-+		/* read data including entire first 64 words from srom */
-+		if (srom_read(bustype, curmap, osh, 0, nw * 2, image))
-+			return 1;
-+		/* make changes */
-+		bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes);
-+		/* calculate crc */
-+		htol16_buf(image, crc_range);
-+		crc = ~hndcrc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE);
-+		ltoh16_buf(image, crc_range);
-+		image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff);
-+		p = image;
-+		off = 0;
-+	} else {
-+		p = buf;
-+		off = byteoff / 2;
-+		nw = nbytes / 2;
-+	}
-+
-+	if (BUSTYPE(bustype) == PCI_BUS) {
-+		srom = (uint16*)((uchar*)curmap + PCI_BAR0_SPROM_OFFSET);
-+		/* enable writes to the SPROM */
-+		val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32));
-+		val32 |= SPROM_WRITEEN;
-+		OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32);
-+		bcm_mdelay(WRITE_ENABLE_DELAY);
-+		/* write srom */
-+		for (i = 0; i < nw; i++) {
-+			W_REG(&srom[off + i], p[i]);
-+			bcm_mdelay(WRITE_WORD_DELAY);
-+		}
-+		/* disable writes to the SPROM */
-+		OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN);
-+	} else {
-+		return 1;
-+	}
-+
-+	bcm_mdelay(WRITE_ENABLE_DELAY);
-+	return 0;
-+}
-+
-+
-+/*
-+ * Read in and validate sprom.
-+ * Return 0 on success, nonzero on error.
-+ */
-+static int
-+sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc)
-+{
-+	int err = 0;
-+	uint i;
-+
-+	/* read the sprom */
-+	for (i = 0; i < nwords; i++)
-+		buf[i] = R_REG(&sprom[wordoff + i]);
-+
-+	if (check_crc) {
-+		/* fixup the endianness so crc8 will pass */
-+		htol16_buf(buf, nwords * 2);
-+		if (hndcrc8((uint8*)buf, nwords * 2, CRC8_INIT_VALUE) != CRC8_GOOD_VALUE)
-+			err = 1;
-+		/* now correct the endianness of the byte array */
-+		ltoh16_buf(buf, nwords * 2);
-+	}
-+	
-+	return err;
-+}	
-+
-+/*
-+* Create variable table from memory.
-+* Return 0 on success, nonzero on error.
-+*/
-+static int
-+initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count)
-+{
-+	int c = (int)(end - start);
-+
-+	/* do it only when there is more than just the null string */
-+	if (c > 1) {
-+		char *vp = MALLOC(osh, c);
-+		ASSERT(vp);
-+		if (!vp)
-+			return BCME_NOMEM;
-+		bcopy(start, vp, c);
-+		*vars = vp;
-+		*count = c;
-+	}
-+	else {
-+		*vars = NULL;
-+		*count = 0;
-+	}
-+	
-+	return 0;
-+}
-+
-+/*
-+ * Initialize nonvolatile variable table from sprom.
-+ * Return 0 on success, nonzero on error.
-+ */
-+static int
-+initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count)
-+{
-+	uint16 w, b[64];
-+	uint8 sromrev;
-+	struct ether_addr ea;
-+	char eabuf[32];		     
-+	uint32 w32;
-+	int woff, i;
-+	char *vp, *base;
-+	osl_t *osh = sb_osh(sbh);
-+	int err;
-+
-+	/*
-+	* Apply CRC over SROM content regardless SROM is present or not,
-+	* and use variable <devpath>sromrev's existance in flash to decide
-+	* if we should return an error when CRC fails or read SROM variables
-+	* from flash.
-+	*/
-+	sprom_read_pci((void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof(b)/sizeof(b[0]), TRUE);
-+
-+	/* top word of sprom contains version and crc8 */
-+	sromrev = b[63] & 0xff;
-+	/* bcm4401 sroms misprogrammed */
-+	if (sromrev == 0x10)
-+		sromrev = 1;
-+	
-+	/* srom version check */
-+	if (sromrev > 3)
-+		return (-2);
-+
-+	ASSERT(vars);
-+	ASSERT(count);
-+
-+	base = vp = MALLOC(osh, VARS_MAX);
-+	ASSERT(vp);
-+	if (!vp)
-+		return -2;
-+
-+	vp += sprintf(vp, "sromrev=%d", sromrev);
-+	vp++;
-+
-+	if (sromrev >= 3) {
-+		/* New section takes over the 3th hardware function space */
-+
-+		/* Words 22+23 are 11a (mid) ofdm power offsets */
-+		w32 = ((uint32)b[23] << 16) | b[22];
-+		vp += sprintf(vp, "ofdmapo=%d", w32);
-+		vp++;
-+
-+		/* Words 24+25 are 11a (low) ofdm power offsets */
-+		w32 = ((uint32)b[25] << 16) | b[24];
-+		vp += sprintf(vp, "ofdmalpo=%d", w32);
-+		vp++;
-+
-+		/* Words 26+27 are 11a (high) ofdm power offsets */
-+		w32 = ((uint32)b[27] << 16) | b[26];
-+		vp += sprintf(vp, "ofdmahpo=%d", w32);
-+		vp++;
-+
-+		/*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/
-+		w32 = ((uint32)b[43] << 24) | ((uint32)b[42] << 8);
-+		vp += sprintf(vp, "gpiotimerval=%d", w32);
-+
-+		/*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/
-+		w32 = ((uint32)((unsigned char)(b[21] >> 8) & 0xFF) << 24) |  /* oncount*/
-+			((uint32)((unsigned char)(b[21] & 0xFF)) << 8); /* offcount */
-+		vp += sprintf(vp, "gpiotimerval=%d", w32);
-+
-+		vp++;
-+	}
-+
-+	if (sromrev >= 2) {
-+		/* New section takes over the 4th hardware function space */
-+
-+		/* Word 29 is max power 11a high/low */
-+		w = b[29];
-+		vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff);
-+		vp++;
-+		vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff);
-+		vp++;
-+
-+		/* Words 30-32 set the 11alow pa settings,
-+		 * 33-35 are the 11ahigh ones.
-+		 */
-+		for (i = 0; i < 3; i++) {
-+			vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]);
-+			vp++;
-+			vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]);
-+			vp++;
-+		}
-+		w = b[59];
-+		if (w == 0)
-+			vp += sprintf(vp, "ccode=");
-+		else
-+			vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff));
-+		vp++;
-+
-+	}
-+
-+	/* parameter section of sprom starts at byte offset 72 */
-+	woff = 72/2;
-+
-+	/* first 6 bytes are il0macaddr */
-+	ea.octet[0] = (b[woff] >> 8) & 0xff;
-+	ea.octet[1] = b[woff] & 0xff;
-+	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+	ea.octet[3] = b[woff+1] & 0xff;
-+	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+	ea.octet[5] = b[woff+2] & 0xff;
-+	woff += ETHER_ADDR_LEN/2 ;
-+	bcm_ether_ntoa((uchar*)&ea, eabuf);
-+	vp += sprintf(vp, "il0macaddr=%s", eabuf);
-+	vp++;
-+
-+	/* next 6 bytes are et0macaddr */
-+	ea.octet[0] = (b[woff] >> 8) & 0xff;
-+	ea.octet[1] = b[woff] & 0xff;
-+	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+	ea.octet[3] = b[woff+1] & 0xff;
-+	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+	ea.octet[5] = b[woff+2] & 0xff;
-+	woff += ETHER_ADDR_LEN/2 ;
-+	bcm_ether_ntoa((uchar*)&ea, eabuf);
-+	vp += sprintf(vp, "et0macaddr=%s", eabuf);
-+	vp++;
-+
-+	/* next 6 bytes are et1macaddr */
-+	ea.octet[0] = (b[woff] >> 8) & 0xff;
-+	ea.octet[1] = b[woff] & 0xff;
-+	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+	ea.octet[3] = b[woff+1] & 0xff;
-+	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+	ea.octet[5] = b[woff+2] & 0xff;
-+	woff += ETHER_ADDR_LEN/2 ;
-+	bcm_ether_ntoa((uchar*)&ea, eabuf);
-+	vp += sprintf(vp, "et1macaddr=%s", eabuf);
-+	vp++;
-+
-+	/*
-+	 * Enet phy settings one or two singles or a dual
-+	 * Bits 4-0 : MII address for enet0 (0x1f for not there)
-+	 * Bits 9-5 : MII address for enet1 (0x1f for not there)
-+	 * Bit 14   : Mdio for enet0
-+	 * Bit 15   : Mdio for enet1
-+	 */
-+	w = b[woff];
-+	vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f));
-+	vp++;
-+	vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f));
-+	vp++;
-+	vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1));
-+	vp++;
-+	vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1));
-+	vp++;
-+
-+	/* Word 46 has board rev, antennas 0/1 & Country code/control */
-+	w = b[46];
-+	vp += sprintf(vp, "boardrev=%d", w & 0xff);
-+	vp++;
-+
-+	if (sromrev > 1)
-+		vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf);
-+	else
-+		vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf);
-+	vp++;
-+
-+	vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3);
-+	vp++;
-+
-+	vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3);
-+	vp++;
-+
-+	/* Words 47-49 set the (wl) pa settings */
-+	woff = 47;
-+
-+	for (i = 0; i < 3; i++) {
-+		vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]);
-+		vp++;
-+		vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]);
-+		vp++;
-+	}
-+
-+	/*
-+	 * Words 50-51 set the customer-configured wl led behavior.
-+	 * 8 bits/gpio pin.  High bit:  activehi=0, activelo=1;
-+	 * LED behavior values defined in wlioctl.h .
-+	 */
-+	w = b[50];
-+	if ((w != 0) && (w != 0xffff)) {
-+		/* gpio0 */
-+		vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff));
-+		vp++;
-+
-+		/* gpio1 */
-+		vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff);
-+		vp++;
-+	}
-+	w = b[51];
-+	if ((w != 0) && (w != 0xffff)) {
-+		/* gpio2 */
-+		vp += sprintf(vp, "wl0gpio2=%d", w & 0xff);
-+		vp++;
-+
-+		/* gpio3 */
-+		vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff);
-+		vp++;
-+	}
-+	
-+	/* Word 52 is max power 0/1 */
-+	w = b[52];
-+	vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff);
-+	vp++;
-+	vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff);
-+	vp++;
-+
-+	/* Word 56 is idle tssi target 0/1 */
-+	w = b[56];
-+	vp += sprintf(vp, "pa0itssit=%d", w & 0xff);
-+	vp++;
-+	vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff);
-+	vp++;
-+
-+	/* Word 57 is boardflags, if not programmed make it zero */
-+	w32 = (uint32)b[57];
-+	if (w32 == 0xffff) w32 = 0;
-+	if (sromrev > 1) {
-+		/* Word 28 is the high bits of boardflags */
-+		w32 |= (uint32)b[28] << 16;
-+	}
-+	vp += sprintf(vp, "boardflags=%d", w32);
-+	vp++;
-+
-+	/* Word 58 is antenna gain 0/1 */
-+	w = b[58];
-+	vp += sprintf(vp, "ag0=%d", w & 0xff);
-+	vp++;
-+
-+	vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff);
-+	vp++;
-+
-+	if (sromrev == 1) {
-+		/* set the oem string */
-+		vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
-+			      ((b[59] >> 8) & 0xff), (b[59] & 0xff),
-+			      ((b[60] >> 8) & 0xff), (b[60] & 0xff),
-+			      ((b[61] >> 8) & 0xff), (b[61] & 0xff),
-+			      ((b[62] >> 8) & 0xff), (b[62] & 0xff));
-+		vp++;
-+	} else if (sromrev == 2) {
-+		/* Word 60 OFDM tx power offset from CCK level */
-+		/* OFDM Power Offset - opo */
-+		vp += sprintf(vp, "opo=%d", b[60] & 0xff);
-+		vp++;
-+	} else {
-+		/* Word 60: cck power offsets */
-+		vp += sprintf(vp, "cckpo=%d", b[60]);
-+		vp++;
-+
-+		/* Words 61+62: 11g ofdm power offsets */
-+		w32 = ((uint32)b[62] << 16) | b[61];
-+		vp += sprintf(vp, "ofdmgpo=%d", w32);
-+		vp++;
-+	}
-+
-+	/* final nullbyte terminator */
-+	*vp++ = '\0';
-+
-+	ASSERT((vp - base) <= VARS_MAX);
-+	
-+	err = initvars_table(osh, base, vp, vars, count);
-+	
-+	MFREE(osh, base, VARS_MAX);
-+	return err;
-+}
-+
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/bcmutils.c
---- linux-2.6.16/arch/mips/bcm947xx/broadcom/bcmutils.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/bcmutils.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,356 @@
-+/*
-+ * Misc useful OS-independent routines.
-+ *
-+ * Copyright 2005, Broadcom Corporation      
-+ * All Rights Reserved.      
-+ *       
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
-+ * $Id$
-+ */
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <sbutils.h>
-+#include <bcmnvram.h>
-+#include <bcmutils.h>
-+#include <bcmendian.h>
-+#include <bcmdevs.h>
-+
-+unsigned char bcm_ctype[] = {
-+	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 0-7 */
-+	_BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C,		/* 8-15 */
-+	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 16-23 */
-+	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 24-31 */
-+	_BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 32-39 */
-+	_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 40-47 */
-+	_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,			/* 48-55 */
-+	_BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 56-63 */
-+	_BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U,	/* 64-71 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,			/* 72-79 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,			/* 80-87 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 88-95 */
-+	_BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L,	/* 96-103 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,			/* 104-111 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,			/* 112-119 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C,			/* 120-127 */
-+	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 128-143 */
-+	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 144-159 */
-+	_BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,   /* 160-175 */
-+	_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,       /* 176-191 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,       /* 192-207 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L,       /* 208-223 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,       /* 224-239 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L        /* 240-255 */
-+};
-+
-+uchar
-+bcm_toupper(uchar c)
-+{
-+	if (bcm_islower(c))
-+		c -= 'a'-'A';
-+	return (c);
-+}
-+
-+ulong
-+bcm_strtoul(char *cp, char **endp, uint base)
-+{
-+	ulong result, value;
-+	bool minus;
-+	
-+	minus = FALSE;
-+
-+	while (bcm_isspace(*cp))
-+		cp++;
-+	
-+	if (cp[0] == '+')
-+		cp++;
-+	else if (cp[0] == '-') {
-+		minus = TRUE;
-+		cp++;
-+	}
-+	
-+	if (base == 0) {
-+		if (cp[0] == '0') {
-+			if ((cp[1] == 'x') || (cp[1] == 'X')) {
-+				base = 16;
-+				cp = &cp[2];
-+			} else {
-+				base = 8;
-+				cp = &cp[1];
-+			}
-+		} else
-+			base = 10;
-+	} else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) {
-+		cp = &cp[2];
-+	}
-+		   
-+	result = 0;
-+
-+	while (bcm_isxdigit(*cp) &&
-+	       (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) {
-+		result = result*base + value;
-+		cp++;
-+	}
-+
-+	if (minus)
-+		result = (ulong)(result * -1);
-+
-+	if (endp)
-+		*endp = (char *)cp;
-+
-+	return (result);
-+}
-+
-+uint
-+bcm_atoi(char *s)
-+{
-+	uint n;
-+
-+	n = 0;
-+
-+	while (bcm_isdigit(*s))
-+		n = (n * 10) + *s++ - '0';
-+	return (n);
-+}
-+
-+/* return pointer to location of substring 'needle' in 'haystack' */
-+char*
-+bcmstrstr(char *haystack, char *needle)
-+{
-+	int len, nlen;
-+	int i;
-+
-+	if ((haystack == NULL) || (needle == NULL))
-+		return (haystack);
-+
-+	nlen = strlen(needle);
-+	len = strlen(haystack) - nlen + 1;
-+
-+	for (i = 0; i < len; i++)
-+		if (bcmp(needle, &haystack[i], nlen) == 0)
-+			return (&haystack[i]);
-+	return (NULL);
-+}
-+
-+char*
-+bcmstrcat(char *dest, const char *src)
-+{
-+	strcpy(&dest[strlen(dest)], src);
-+	return (dest);
-+}
-+
-+
-+char*
-+bcm_ether_ntoa(char *ea, char *buf)
-+{
-+	sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x",
-+		(uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff,
-+		(uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff);
-+	return (buf);
-+}
-+
-+/* parse a xx:xx:xx:xx:xx:xx format ethernet address */
-+int
-+bcm_ether_atoe(char *p, char *ea)
-+{
-+	int i = 0;
-+
-+	for (;;) {
-+		ea[i++] = (char) bcm_strtoul(p, &p, 16);
-+		if (!*p++ || i == 6)
-+			break;
-+	}
-+
-+	return (i == 6);
-+}
-+
-+void
-+bcm_mdelay(uint ms)
-+{
-+	uint i;
-+
-+	for (i = 0; i < ms; i++) {
-+		OSL_DELAY(1000);
-+	}
-+}
-+
-+/*
-+ * Search the name=value vars for a specific one and return its value.
-+ * Returns NULL if not found.
-+ */
-+char*
-+getvar(char *vars, char *name)
-+{
-+	char *s;
-+	int len;
-+
-+	len = strlen(name);
-+
-+	/* first look in vars[] */
-+	for (s = vars; s && *s; ) {
-+		if ((bcmp(s, name, len) == 0) && (s[len] == '='))
-+			return (&s[len+1]);
-+
-+		while (*s++)
-+			;
-+	}
-+
-+	/* then query nvram */
-+	return (BCMINIT(nvram_get)(name));
-+}
-+
-+/*
-+ * Search the vars for a specific one and return its value as
-+ * an integer. Returns 0 if not found.
-+ */
-+int
-+getintvar(char *vars, char *name)
-+{
-+	char *val;
-+
-+	if ((val = getvar(vars, name)) == NULL)
-+		return (0);
-+
-+	return (bcm_strtoul(val, NULL, 0));
-+}
-+
-+
-+/* Search for token in comma separated token-string */
-+static int
-+findmatch(char *string, char *name)
-+{
-+	uint len;
-+	char *c;
-+
-+	len = strlen(name);
-+	while ((c = strchr(string, ',')) != NULL) {
-+		if (len == (uint)(c - string) && !strncmp(string, name, len))
-+			return 1;
-+		string = c + 1;
-+	}
-+
-+	return (!strcmp(string, name));
-+}
-+
-+/* Return gpio pin number assigned to the named pin */
-+/*
-+* Variable should be in format:
-+*
-+*	gpio<N>=pin_name,pin_name
-+*
-+* This format allows multiple features to share the gpio with mutual
-+* understanding.
-+*
-+* 'def_pin' is returned if a specific gpio is not defined for the requested functionality 
-+* and if def_pin is not used by others.
-+*/
-+uint
-+getgpiopin(char *vars, char *pin_name, uint def_pin)
-+{
-+	char name[] = "gpioXXXX";
-+	char *val;
-+	uint pin;
-+
-+	/* Go thru all possibilities till a match in pin name */
-+	for (pin = 0; pin < GPIO_NUMPINS; pin ++) {
-+		sprintf(name, "gpio%d", pin);
-+		val = getvar(vars, name);
-+		if (val && findmatch(val, pin_name))
-+			return pin;
-+	}
-+
-+	if (def_pin != GPIO_PIN_NOTDEFINED) {
-+		/* make sure the default pin is not used by someone else */
-+		sprintf(name, "gpio%d", def_pin);
-+		if (getvar(vars, name)) {
-+			def_pin =  GPIO_PIN_NOTDEFINED;
-+		}
-+	}
-+
-+	return def_pin;
-+}
-+
-+
-+/*******************************************************************************
-+ * crc8
-+ *
-+ * Computes a crc8 over the input data using the polynomial:
-+ *
-+ *       x^8 + x^7 +x^6 + x^4 + x^2 + 1
-+ *
-+ * The caller provides the initial value (either CRC8_INIT_VALUE
-+ * or the previous returned value) to allow for processing of 
-+ * discontiguous blocks of data.  When generating the CRC the
-+ * caller is responsible for complementing the final return value
-+ * and inserting it into the byte stream.  When checking, a final
-+ * return value of CRC8_GOOD_VALUE indicates a valid CRC.
-+ *
-+ * Reference: Dallas Semiconductor Application Note 27
-+ *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", 
-+ *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
-+ *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
-+ *
-+ ******************************************************************************/
-+
-+static uint8 crc8_table[256] = {
-+    0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
-+    0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
-+    0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
-+    0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
-+    0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
-+    0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
-+    0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
-+    0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
-+    0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
-+    0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
-+    0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
-+    0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
-+    0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
-+    0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
-+    0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
-+    0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
-+    0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
-+    0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
-+    0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
-+    0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
-+    0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
-+    0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
-+    0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
-+    0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
-+    0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
-+    0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
-+    0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
-+    0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
-+    0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
-+    0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
-+    0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
-+    0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
-+};
-+
-+#define CRC_INNER_LOOP(n, c, x) \
-+    (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
-+
-+uint8
-+hndcrc8(
-+	uint8 *pdata,	/* pointer to array of data to process */
-+	uint  nbytes,	/* number of input data bytes to process */
-+	uint8 crc	/* either CRC8_INIT_VALUE or previous return value */
-+)
-+{
-+	/* hard code the crc loop instead of using CRC_INNER_LOOP macro
-+	 * to avoid the undefined and unnecessary (uint8 >> 8) operation. */
-+	while (nbytes-- > 0)
-+		crc = crc8_table[(crc ^ *pdata++) & 0xff];
-+
-+	return crc;
-+}
-+
-+#ifdef notdef
-+#define CLEN 	1499
-+#define CBUFSIZ 	(CLEN+4)
-+#define CNBUFS		5
-+
-+#endif
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/broadcom/cfe_env.c linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/cfe_env.c
---- linux-2.6.16/arch/mips/bcm947xx/broadcom/cfe_env.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/cfe_env.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,234 @@
-+/*
-+ * NVRAM variable manipulation (Linux kernel half)
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmendian.h>
-+#include <bcmutils.h>
-+
-+#define NVRAM_SIZE       (0x1ff0)
-+static char _nvdata[NVRAM_SIZE] __initdata;
-+static char _valuestr[256] __initdata;
-+
-+/*
-+ * TLV types.  These codes are used in the "type-length-value"
-+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
-+ *
-+ * The layout of the flash/nvram is as follows:
-+ *
-+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
-+ *
-+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
-+ * The "length" field marks the length of the data section, not
-+ * including the type and length fields.
-+ *
-+ * Environment variables are stored as follows:
-+ *
-+ * <type_env> <length> <flags> <name> = <value>
-+ *
-+ * If bit 0 (low bit) is set, the length is an 8-bit value.
-+ * If bit 0 (low bit) is clear, the length is a 16-bit value
-+ * 
-+ * Bit 7 set indicates "user" TLVs.  In this case, bit 0 still
-+ * indicates the size of the length field.  
-+ *
-+ * Flags are from the constants below:
-+ *
-+ */
-+#define ENV_LENGTH_16BITS	0x00	/* for low bit */
-+#define ENV_LENGTH_8BITS	0x01
-+
-+#define ENV_TYPE_USER		0x80
-+
-+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-+
-+/*
-+ * The actual TLV types we support
-+ */
-+
-+#define ENV_TLV_TYPE_END	0x00	
-+#define ENV_TLV_TYPE_ENV	ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-+
-+/*
-+ * Environment variable flags 
-+ */
-+
-+#define ENV_FLG_NORMAL		0x00	/* normal read/write */
-+#define ENV_FLG_BUILTIN		0x01	/* builtin - not stored in flash */
-+#define ENV_FLG_READONLY	0x02	/* read-only - cannot be changed */
-+
-+#define ENV_FLG_MASK		0xFF	/* mask of attributes we keep */
-+#define ENV_FLG_ADMIN		0x100	/* lets us internally override permissions */
-+
-+
-+/*  *********************************************************************
-+    *  _nvram_read(buffer,offset,length)
-+    *  
-+    *  Read data from the NVRAM device
-+    *  
-+    *  Input parameters: 
-+    *  	   buffer - destination buffer
-+    *  	   offset - offset of data to read
-+    *  	   length - number of bytes to read
-+    *  	   
-+    *  Return value:
-+    *  	   number of bytes read, or <0 if error occured
-+    ********************************************************************* */
-+static int
-+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-+{
-+    int i;
-+    if (offset > NVRAM_SIZE)
-+	return -1; 
-+
-+    for ( i = 0; i < length; i++) {
-+	buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-+    }
-+    return length;
-+}
-+
-+
-+static char*
-+_strnchr(const char *dest,int c,size_t cnt)
-+{
-+	while (*dest && (cnt > 0)) {
-+	if (*dest == c) return (char *) dest;
-+	dest++;
-+	cnt--;
-+	}
-+	return NULL;
-+}
-+
-+
-+
-+/*
-+ * Core support API: Externally visible.
-+ */
-+
-+/*
-+ * Get the value of an NVRAM variable
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NULL if undefined
-+ */
-+
-+char* 
-+cfe_env_get(unsigned char *nv_buf, char* name)
-+{
-+    int size;
-+    unsigned char *buffer;
-+    unsigned char *ptr;
-+    unsigned char *envval;
-+    unsigned int reclen;
-+    unsigned int rectype;
-+    int offset;
-+    int flg;
-+    
-+    size = NVRAM_SIZE;
-+    buffer = &_nvdata[0];
-+
-+    ptr = buffer;
-+    offset = 0;
-+
-+    /* Read the record type and length */
-+    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+	goto error;
-+    }
-+    
-+    while ((*ptr != ENV_TLV_TYPE_END)  && (size > 1)) {
-+
-+	/* Adjust pointer for TLV type */
-+	rectype = *(ptr);
-+	offset++;
-+	size--;
-+
-+	/* 
-+	 * Read the length.  It can be either 1 or 2 bytes
-+	 * depending on the code 
-+	 */
-+	if (rectype & ENV_LENGTH_8BITS) {
-+	    /* Read the record type and length - 8 bits */
-+	    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+		goto error;
-+	    }
-+	    reclen = *(ptr);
-+	    size--;
-+	    offset++;
-+	}
-+	else {
-+	    /* Read the record type and length - 16 bits, MSB first */
-+	    if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-+		goto error;
-+	    }
-+	    reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-+	    size -= 2;
-+	    offset += 2;
-+	}
-+
-+	if (reclen > size)
-+	    break;	/* should not happen, bad NVRAM */
-+
-+	switch (rectype) {
-+	    case ENV_TLV_TYPE_ENV:
-+		/* Read the TLV data */
-+		if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-+		    goto error;
-+		flg = *ptr++;
-+		envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-+		if (envval) {
-+		    *envval++ = '\0';
-+		    memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-+		    _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-+#if 0			
-+		    printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-+#endif
-+		    if(!strcmp(ptr, name)){
-+			return _valuestr;
-+		    }
-+		    if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-+			return _valuestr;
-+		}
-+		break;
-+		
-+	    default: 
-+		/* Unknown TLV type, skip it. */
-+		break;
-+	    }
-+
-+	/*
-+	 * Advance to next TLV 
-+	 */
-+		
-+	size -= (int)reclen;
-+	offset += reclen;
-+
-+	/* Read the next record type */
-+	ptr = buffer;
-+	if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-+	    goto error;
-+	}
-+
-+error:
-+    return NULL;
-+
-+}
-+
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/broadcom/linux_osl.c linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/linux_osl.c
---- linux-2.6.16/arch/mips/bcm947xx/broadcom/linux_osl.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/linux_osl.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,102 @@
-+/*
-+ * Linux OS Independent Layer
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#define LINUX_OSL
-+
-+#include <typedefs.h>
-+#include <bcmendian.h>
-+#include <linux/module.h>
-+#include <linuxver.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <linux/delay.h>
-+#ifdef mips
-+#include <asm/paccess.h>
-+#endif
-+#include <pcicfg.h>
-+
-+#define PCI_CFG_RETRY 		10	
-+
-+#define OS_HANDLE_MAGIC		0x1234abcd
-+#define BCM_MEM_FILENAME_LEN 	24
-+
-+typedef struct bcm_mem_link {
-+	struct bcm_mem_link *prev;
-+	struct bcm_mem_link *next;
-+	uint	size;
-+	int	line;
-+	char	file[BCM_MEM_FILENAME_LEN];
-+} bcm_mem_link_t;
-+
-+struct os_handle {
-+	uint magic;
-+	void *pdev;
-+	uint malloced;
-+	uint failed;
-+	bcm_mem_link_t *dbgmem_list;
-+};
-+
-+uint32
-+osl_pci_read_config(osl_t *osh, uint offset, uint size)
-+{
-+	uint val;
-+	uint retry=PCI_CFG_RETRY;	 
-+
-+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
-+
-+	/* only 4byte access supported */
-+	ASSERT(size == 4);
-+
-+	do {
-+		pci_read_config_dword(osh->pdev, offset, &val);
-+		if (val != 0xffffffff)
-+			break;
-+	} while (retry--);
-+
-+
-+	return (val);
-+}
-+
-+void
-+osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val)
-+{
-+	uint retry=PCI_CFG_RETRY;	 
-+
-+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
-+
-+	/* only 4byte access supported */
-+	ASSERT(size == 4);
-+
-+	do {
-+		pci_write_config_dword(osh->pdev, offset, val);
-+		if (offset!=PCI_BAR0_WIN)
-+			break;
-+		if (osl_pci_read_config(osh,offset,size) == val) 
-+			break;
-+	} while (retry--);
-+
-+}
-+
-+void
-+osl_delay(uint usec)
-+{
-+	uint d;
-+
-+	while (usec > 0) {
-+		d = MIN(usec, 1000);
-+		udelay(d);
-+		usec -= d;
-+	}
-+}
-+
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/broadcom/Makefile linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/Makefile
---- linux-2.6.16/arch/mips/bcm947xx/broadcom/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/Makefile	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,6 @@
-+#
-+# Makefile for the BCM47xx specific kernel interface routines
-+# under Linux.
-+#
-+ 
-+obj-y	:= sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o sflash.o nvram.o cfe_env.o
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/broadcom/nvram.c linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/nvram.c
---- linux-2.6.16/arch/mips/bcm947xx/broadcom/nvram.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/nvram.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,192 @@
-+/*
-+ * NVRAM variable manipulation (Linux kernel half)
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/interrupt.h>
-+#include <linux/spinlock.h>
-+#include <linux/slab.h>
-+#include <asm/bootinfo.h>
-+#include <asm/addrspace.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+#include <typedefs.h>
-+#include <bcmendian.h>
-+#include <bcmnvram.h>
-+#include <bcmutils.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <sbutils.h>
-+#include <sbmips.h>
-+#include <sflash.h>
-+
-+/* In BSS to minimize text size and page aligned so it can be mmap()-ed */
-+static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE)));
-+
-+/* Global SB handle */
-+extern void *sbh;
-+extern spinlock_t bcm947xx_sbh_lock;
-+static int cfe_env;
-+
-+extern char *cfe_env_get(char *nv_buf, const char *name);
-+		
-+
-+/* Convenience */
-+#define sbh_lock bcm947xx_sbh_lock
-+#define KB * 1024
-+#define MB * 1024 * 1024
-+
-+/* Probe for NVRAM header */
-+static void __init
-+early_nvram_init(void)
-+{
-+	struct nvram_header *header;
-+	chipcregs_t *cc;
-+	struct sflash *info = NULL;
-+	int i;
-+	uint32 base, off, lim;
-+	u32 *src, *dst;
-+
-+	cfe_env = 0;
-+	if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) {
-+		base = KSEG1ADDR(SB_FLASH2);
-+		switch (readl(&cc->capabilities) & CAP_FLASH_MASK) {
-+		case PFLASH:
-+			lim = SB_FLASH2_SZ;
-+			break;
-+
-+		case SFLASH_ST:
-+		case SFLASH_AT:
-+			if ((info = sflash_init(cc)) == NULL)
-+				return;
-+			lim = info->size;
-+			break;
-+
-+		case FLASH_NONE:
-+		default:
-+			return;
-+		}
-+	} else {
-+		/* extif assumed, Stop at 4 MB */
-+		base = KSEG1ADDR(SB_FLASH1);
-+		lim = SB_FLASH1_SZ;
-+	}
-+
-+	/* XXX: hack for supporting the CFE environment stuff on WGT634U */
-+	src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
-+	dst = (u32 *) nvram_buf;
-+	if ((lim == 0x02000000) && ((*src & 0xff00ff) == 0x000001)) {
-+		printk("early_nvram_init: WGT634U NVRAM found.\n");
-+
-+		for (i = 0; i < 0x1ff0; i++) {
-+			if (*src == 0xFFFFFFFF)
-+				break;
-+			*dst++ = *src++;
-+		}
-+		cfe_env = 1;
-+		return;
-+	}
-+
-+	off = FLASH_MIN;
-+	while (off <= lim) {
-+		/* Windowed flash access */
-+		header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE);
-+		if (header->magic == NVRAM_MAGIC)
-+			goto found;
-+		off <<= 1;
-+	}
-+
-+	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
-+	header = (struct nvram_header *) KSEG1ADDR(base + 4 KB);
-+	if (header->magic == NVRAM_MAGIC)
-+		goto found;
-+	
-+	header = (struct nvram_header *) KSEG1ADDR(base + 1 KB);
-+	if (header->magic == NVRAM_MAGIC)
-+		goto found;
-+	
-+	return;
-+
-+found:
-+	src = (u32 *) header;
-+	dst = (u32 *) nvram_buf;
-+	for (i = 0; i < sizeof(struct nvram_header); i += 4)
-+		*dst++ = *src++;
-+	for (; i < header->len && i < NVRAM_SPACE; i += 4)
-+		*dst++ = ltoh32(*src++);
-+}
-+
-+/* Early (before mm or mtd) read-only access to NVRAM */
-+char * __init early_nvram_get(const char *name)
-+{
-+	char *var, *value, *end, *eq;
-+
-+	if (!name)
-+		return NULL;
-+
-+	/* Too early? */
-+	if (sbh == NULL)
-+		return NULL;
-+
-+	if (!nvram_buf[0])
-+		early_nvram_init();
-+
-+	if (cfe_env)
-+		return cfe_env_get(nvram_buf, name);
-+
-+	/* Look for name=value and return value */
-+	var = &nvram_buf[sizeof(struct nvram_header)];
-+	end = nvram_buf + sizeof(nvram_buf) - 2;
-+	end[0] = end[1] = '\0';
-+	for (; *var; var = value + strlen(value) + 1) {
-+		if (!(eq = strchr(var, '=')))
-+			break;
-+		value = eq + 1;
-+		if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
-+			return value;
-+	}
-+
-+	return NULL;
-+}
-+
-+char *nvram_get(const char *name)
-+{
-+	char *var, *value, *end, *eq;
-+
-+	if (!name)
-+		return NULL;
-+
-+	if (!nvram_buf[0])
-+		return NULL;
-+	
-+	/* Look for name=value and return value */
-+	var = &nvram_buf[sizeof(struct nvram_header)];
-+	end = nvram_buf + sizeof(nvram_buf) - 2;
-+	end[0] = end[1] = '\0';
-+	for (; *var; var = value + strlen(value) + 1) {
-+		if (!(eq = strchr(var, '=')))
-+			break;
-+		value = eq + 1;
-+		if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
-+			return value;
-+	}
-+	
-+	return NULL;
-+}
-+
-+EXPORT_SYMBOL(nvram_get);
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/sbmips.c
---- linux-2.6.16/arch/mips/bcm947xx/broadcom/sbmips.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/sbmips.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,1055 @@
-+/*
-+ * BCM47XX Sonics SiliconBackplane MIPS core routines
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <sbutils.h>
-+#include <bcmdevs.h>
-+#include <bcmnvram.h>
-+#include <bcmutils.h>
-+#include <hndmips.h>
-+#include <sbconfig.h>
-+#include <sbextif.h>
-+#include <sbchipc.h>
-+#include <sbmemc.h>
-+#include <mipsinc.h>
-+#include <sbutils.h>
-+
-+/*
-+ * Returns TRUE if an external UART exists at the given base
-+ * register.
-+ */
-+static bool
-+BCMINITFN(serial_exists)(uint8 *regs)
-+{
-+	uint8 save_mcr, status1;
-+
-+	save_mcr = R_REG(&regs[UART_MCR]);
-+	W_REG(&regs[UART_MCR], UART_MCR_LOOP | 0x0a);
-+	status1 = R_REG(&regs[UART_MSR]) & 0xf0;
-+	W_REG(&regs[UART_MCR], save_mcr);
-+
-+	return (status1 == 0x90);
-+}
-+
-+/*
-+ * Initializes UART access. The callback function will be called once
-+ * per found UART.
-+ */
-+void
-+BCMINITFN(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift))
-+{
-+	void *regs;
-+	ulong base;
-+	uint irq;
-+	int i, n;
-+
-+	if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) {
-+		extifregs_t *eir = (extifregs_t *) regs;
-+		sbconfig_t *sb;
-+
-+		/* Determine external UART register base */
-+		sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
-+		base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1)));
-+
-+		/* Determine IRQ */
-+		irq = sb_irq(sbh);
-+
-+		/* Disable GPIO interrupt initially */
-+		W_REG(&eir->gpiointpolarity, 0);
-+		W_REG(&eir->gpiointmask, 0);
-+
-+		/* Search for external UARTs */
-+		n = 2;
-+		for (i = 0; i < 2; i++) {
-+			regs = (void *) REG_MAP(base + (i * 8), 8);
-+			if (BCMINIT(serial_exists)(regs)) {
-+				/* Set GPIO 1 to be the external UART IRQ */
-+				W_REG(&eir->gpiointmask, 2);
-+				if (add)
-+					add(regs, irq, 13500000, 0);
-+			}
-+		}
-+
-+		/* Add internal UART if enabled */
-+		if (R_REG(&eir->corecontrol) & CC_UE)
-+			if (add)
-+				add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
-+	} else if ((regs = sb_setcore(sbh, SB_CC, 0))) {
-+		chipcregs_t *cc = (chipcregs_t *) regs;
-+		uint32 rev, cap, pll, baud_base, div;
-+
-+		/* Determine core revision and capabilities */
-+		rev = sb_corerev(sbh);
-+		cap = R_REG(&cc->capabilities);
-+		pll = cap & CAP_PLL_MASK;
-+
-+		/* Determine IRQ */
-+		irq = sb_irq(sbh);
-+
-+		if (pll == PLL_TYPE1) {
-+			/* PLL clock */
-+			baud_base = sb_clock_rate(pll,
-+						  R_REG(&cc->clockcontrol_n),
-+						  R_REG(&cc->clockcontrol_m2));
-+			div = 1;
-+		} else {
-+			if (rev >= 11) {
-+				/* Fixed ALP clock */
-+				baud_base = 20000000;
-+				div = 1;
-+				/* Set the override bit so we don't divide it */
-+				W_REG(&cc->corecontrol, CC_UARTCLKO);
-+			} else if (rev >= 3) {
-+				/* Internal backplane clock */
-+				baud_base = sb_clock(sbh);
-+				div = 2;	/* Minimum divisor */
-+				W_REG(&cc->clkdiv,
-+				      ((R_REG(&cc->clkdiv) & ~CLKD_UART) | div));
-+			} else {
-+				/* Fixed internal backplane clock */
-+				baud_base = 88000000;
-+				div = 48;
-+			}
-+
-+			/* Clock source depends on strapping if UartClkOverride is unset */
-+			if ((rev > 0) &&
-+			    ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) {
-+				if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) {
-+					/* Internal divided backplane clock */
-+					baud_base /= div;
-+				} else {
-+					/* Assume external clock of 1.8432 MHz */
-+					baud_base = 1843200;
-+				}
-+			}
-+		}
-+
-+		/* Add internal UARTs */
-+		n = cap & CAP_UARTS_MASK;
-+		for (i = 0; i < n; i++) {
-+			/* Register offset changed after revision 0 */
-+			if (rev)
-+				regs = (void *)((ulong) &cc->uart0data + (i * 256));
-+			else
-+				regs = (void *)((ulong) &cc->uart0data + (i * 8));
-+
-+			if (add)
-+				add(regs, irq, baud_base, 0);
-+		}
-+	}
-+}
-+
-+/*
-+ * Initialize jtag master and return handle for
-+ * jtag_rwreg. Returns NULL on failure.
-+ */
-+void *
-+sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap)
-+{
-+	void *regs;
-+
-+	if ((regs = sb_setcore(sbh, SB_CC, 0)) != NULL) {
-+		chipcregs_t *cc = (chipcregs_t *) regs;
-+		uint32 tmp;
-+
-+		/*
-+		 * Determine jtagm availability from
-+		 * core revision and capabilities.
-+		 */
-+		tmp = sb_corerev(sbh);
-+		/*
-+		 * Corerev 10 has jtagm, but the only chip
-+		 * with it does not have a mips, and
-+		 * the layout of the jtagcmd register is
-+		 * different. We'll only accept >= 11.
-+		 */
-+		if (tmp < 11)
-+			return (NULL);
-+
-+		tmp = R_REG(&cc->capabilities);
-+		if ((tmp & CAP_JTAGP) == 0)
-+			return (NULL);
-+
-+		/* Set clock divider if requested */
-+		if (clkd != 0) {
-+			tmp = R_REG(&cc->clkdiv);
-+			tmp = (tmp & ~CLKD_JTAG) |
-+				((clkd << CLKD_JTAG_SHIFT) & CLKD_JTAG);
-+			W_REG(&cc->clkdiv, tmp);
-+		}
-+
-+		/* Enable jtagm */
-+		tmp = JCTRL_EN | (exttap ? JCTRL_EXT_EN : 0);
-+		W_REG(&cc->jtagctrl, tmp);
-+	}
-+
-+	return (regs);
-+}
-+
-+void
-+sb_jtagm_disable(void *h)
-+{
-+	chipcregs_t *cc = (chipcregs_t *)h;
-+
-+	W_REG(&cc->jtagctrl, R_REG(&cc->jtagctrl) & ~JCTRL_EN);
-+}
-+
-+/*
-+ * Read/write a jtag register. Assumes a target with
-+ * 8 bit IR and 32 bit DR.
-+ */
-+#define	IRWIDTH		8
-+#define	DRWIDTH		32
-+uint32
-+jtag_rwreg(void *h, uint32 ir, uint32 dr)
-+{
-+	chipcregs_t *cc = (chipcregs_t *) h;
-+	uint32 tmp;
-+
-+	W_REG(&cc->jtagir, ir);
-+	W_REG(&cc->jtagdr, dr);
-+	tmp = JCMD_START | JCMD_ACC_IRDR |
-+		((IRWIDTH - 1) << JCMD_IRW_SHIFT) |
-+		(DRWIDTH - 1);
-+	W_REG(&cc->jtagcmd, tmp);
-+	while (((tmp = R_REG(&cc->jtagcmd)) & JCMD_BUSY) == JCMD_BUSY) {
-+		/* OSL_DELAY(1); */
-+	}
-+
-+	tmp = R_REG(&cc->jtagdr);
-+	return (tmp);
-+}
-+
-+/* Returns the SB interrupt flag of the current core. */
-+uint32
-+sb_flag(sb_t *sbh)
-+{
-+	void *regs;
-+	sbconfig_t *sb;
-+
-+	regs = sb_coreregs(sbh);
-+	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+	return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK);
-+}
-+
-+static const uint32 sbips_int_mask[] = {
-+	0,
-+	SBIPS_INT1_MASK,
-+	SBIPS_INT2_MASK,
-+	SBIPS_INT3_MASK,
-+	SBIPS_INT4_MASK
-+};
-+
-+static const uint32 sbips_int_shift[] = {
-+	0,
-+	0,
-+	SBIPS_INT2_SHIFT,
-+	SBIPS_INT3_SHIFT,
-+	SBIPS_INT4_SHIFT
-+};
-+
-+/*
-+ * Returns the MIPS IRQ assignment of the current core. If unassigned,
-+ * 0 is returned.
-+ */
-+uint
-+sb_irq(sb_t *sbh)
-+{
-+	uint idx;
-+	void *regs;
-+	sbconfig_t *sb;
-+	uint32 flag, sbipsflag;
-+	uint irq = 0;
-+
-+	flag = sb_flag(sbh);
-+
-+	idx = sb_coreidx(sbh);
-+
-+	if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
-+	    (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
-+		sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+		/* sbipsflag specifies which core is routed to interrupts 1 to 4 */
-+		sbipsflag = R_REG(&sb->sbipsflag);
-+		for (irq = 1; irq <= 4; irq++) {
-+			if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag)
-+				break;
-+		}
-+		if (irq == 5)
-+			irq = 0;
-+	}
-+
-+	sb_setcoreidx(sbh, idx);
-+
-+	return irq;
-+}
-+
-+/* Clears the specified MIPS IRQ. */
-+static void
-+BCMINITFN(sb_clearirq)(sb_t *sbh, uint irq)
-+{
-+	void *regs;
-+	sbconfig_t *sb;
-+
-+	if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
-+	    !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
-+		ASSERT(regs);
-+	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+	if (irq == 0)
-+		W_REG(&sb->sbintvec, 0);
-+	else
-+		OR_REG(&sb->sbipsflag, sbips_int_mask[irq]);
-+}
-+
-+/*
-+ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS
-+ * IRQ 0 may be assigned more than once.
-+ */
-+static void
-+BCMINITFN(sb_setirq)(sb_t *sbh, uint irq, uint coreid, uint coreunit)
-+{
-+	void *regs;
-+	sbconfig_t *sb;
-+	uint32 flag;
-+
-+	regs = sb_setcore(sbh, coreid, coreunit);
-+	ASSERT(regs);
-+	flag = sb_flag(sbh);
-+
-+	if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
-+	    !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
-+		ASSERT(regs);
-+	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+	if (irq == 0)
-+		OR_REG(&sb->sbintvec, 1 << flag);
-+	else {
-+		flag <<= sbips_int_shift[irq];
-+		ASSERT(!(flag & ~sbips_int_mask[irq]));
-+		flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq];
-+		W_REG(&sb->sbipsflag, flag);
-+	}
-+}
-+
-+/*
-+ * Initializes clocks and interrupts. SB and NVRAM access must be
-+ * initialized prior to calling.
-+ */
-+void
-+BCMINITFN(sb_mips_init)(sb_t *sbh)
-+{
-+	ulong hz, ns, tmp;
-+	extifregs_t *eir;
-+	chipcregs_t *cc;
-+	char *value;
-+	uint irq;
-+
-+	/* Figure out current SB clock speed */
-+	if ((hz = sb_clock(sbh)) == 0)
-+		hz = 100000000;
-+	ns = 1000000000 / hz;
-+
-+	/* Setup external interface timing */
-+	if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
-+		/* Initialize extif so we can get to the LEDs and external UART */
-+		W_REG(&eir->prog_config, CF_EN);
-+
-+		/* Set timing for the flash */
-+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
-+		tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
-+		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
-+		W_REG(&eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
-+
-+		/* Set programmable interface timing for external uart */
-+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
-+		tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
-+		tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
-+		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
-+		W_REG(&eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
-+	} else if ((cc = sb_setcore(sbh, SB_CC, 0))) {
-+		/* set register for external IO to control LED. */
-+                W_REG(&cc->prog_config, 0x11);
-+                tmp = CEIL(10, ns) << FW_W3_SHIFT;      /* W3 = 10nS */
-+                tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
-+                tmp = tmp | CEIL(240, ns);              /* W0 = 120nS */
-+                W_REG(&cc->prog_waitcount, tmp);        /* 0x01020a0c for a 100Mhz clock */
-+
-+		/* Set timing for the flash */
-+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
-+		tmp |= CEIL(10, ns) << FW_W1_SHIFT;	/* W1 = 10nS */
-+		tmp |= CEIL(120, ns);			/* W0 = 120nS */
-+		
-+		// Added by Chen-I for 5365
-+		if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID)
-+		{
-+			W_REG(&cc->flash_waitcount, tmp);
-+			W_REG(&cc->pcmcia_memwait, tmp);
-+		}
-+		else
-+		{
-+			if (sb_corerev(sbh) < 9)
-+				W_REG(&cc->flash_waitcount, tmp);
-+
-+			if ((sb_corerev(sbh) < 9) ||
-+		   	 ((BCMINIT(sb_chip)(sbh) == BCM5350_DEVICE_ID) && BCMINIT(sb_chiprev)(sbh) == 0)) {
-+				W_REG(&cc->pcmcia_memwait, tmp);
-+			}
-+		}
-+		// Added by Chen-I & Yen for enabling 5350 EXTIF
-+		if (BCMINIT(sb_chip)(sbh) == BCM5350_DEVICE_ID) 
-+		{
-+			/* Set programmable interface timing for external uart */
-+			tmp = CEIL(10, ns) << FW_W3_SHIFT;      /* W3 = 10nS */
-+			tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
-+			tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
-+			tmp = tmp | CEIL(120, ns);              /* W0 = 120nS */
-+			W_REG(&cc->prog_waitcount, tmp);       /* 0x01020a0c for a 100Mhz clock */
-+		}
-+	}
-+
-+	/* Chip specific initialization */
-+	switch (BCMINIT(sb_chip)(sbh)) {
-+	case BCM4710_DEVICE_ID:
-+		/* Clear interrupt map */
-+		for (irq = 0; irq <= 4; irq++)
-+			BCMINIT(sb_clearirq)(sbh, irq);
-+		BCMINIT(sb_setirq)(sbh, 0, SB_CODEC, 0);
-+		BCMINIT(sb_setirq)(sbh, 0, SB_EXTIF, 0);
-+		BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 1);
-+		BCMINIT(sb_setirq)(sbh, 3, SB_ILINE20, 0);
-+		BCMINIT(sb_setirq)(sbh, 4, SB_PCI, 0);
-+		ASSERT(eir);
-+		value = BCMINIT(early_nvram_get)("et0phyaddr");
-+		if (value && !strcmp(value, "31")) {
-+			/* Enable internal UART */
-+			W_REG(&eir->corecontrol, CC_UE);
-+			/* Give USB its own interrupt */
-+			BCMINIT(sb_setirq)(sbh, 1, SB_USB, 0);
-+		} else {
-+			/* Disable internal UART */
-+			W_REG(&eir->corecontrol, 0);
-+			/* Give Ethernet its own interrupt */
-+			BCMINIT(sb_setirq)(sbh, 1, SB_ENET, 0);
-+			BCMINIT(sb_setirq)(sbh, 0, SB_USB, 0);
-+		}
-+		break;
-+	case BCM5350_DEVICE_ID:
-+		/* Clear interrupt map */
-+		for (irq = 0; irq <= 4; irq++)
-+			BCMINIT(sb_clearirq)(sbh, irq);
-+		BCMINIT(sb_setirq)(sbh, 0, SB_CC, 0);
-+		BCMINIT(sb_setirq)(sbh, 1, SB_D11, 0);
-+		BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 0);
-+		BCMINIT(sb_setirq)(sbh, 3, SB_PCI, 0);
-+		BCMINIT(sb_setirq)(sbh, 4, SB_USB, 0);
-+		break;
-+	}
-+}
-+
-+uint32
-+BCMINITFN(sb_mips_clock)(sb_t *sbh)
-+{
-+	extifregs_t *eir;
-+	chipcregs_t *cc;
-+	uint32 n, m;
-+	uint idx;
-+	uint32 pll_type, rate = 0;
-+
-+	/* get index of the current core */
-+	idx = sb_coreidx(sbh);
-+	pll_type = PLL_TYPE1;
-+
-+	/* switch to extif or chipc core */
-+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+		n = R_REG(&eir->clockcontrol_n);
-+		m = R_REG(&eir->clockcontrol_sb);
-+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
-+		n = R_REG(&cc->clockcontrol_n);
-+		if ((pll_type == PLL_TYPE2) ||
-+		    (pll_type == PLL_TYPE4) ||
-+		    (pll_type == PLL_TYPE6) ||
-+		    (pll_type == PLL_TYPE7))
-+			m = R_REG(&cc->clockcontrol_mips);
-+		else if (pll_type == PLL_TYPE5) {
-+			rate = 200000000;
-+			goto out;
-+		}
-+		else if (pll_type == PLL_TYPE3) {
-+			if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) { /* 5365 is also type3 */
-+				rate = 200000000;
-+				goto out;
-+			} else
-+				m = R_REG(&cc->clockcontrol_m2); /* 5350 uses m2 to control mips */
-+		} else
-+			m = R_REG(&cc->clockcontrol_sb);
-+	} else
-+		goto out;
-+
-+	// Added by Chen-I for 5365 
-+	if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID)
-+		rate = 100000000;
-+	else
-+		/* calculate rate */
-+		rate = sb_clock_rate(pll_type, n, m);
-+
-+	if (pll_type == PLL_TYPE6)
-+		rate = SB2MIPS_T6(rate);
-+
-+out:
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
-+
-+	return rate;
-+}
-+
-+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
-+
-+static void
-+BCMINITFN(handler)(void)
-+{
-+	/* Step 11 */
-+	__asm__ (
-+		".set\tmips32\n\t"
-+		"ssnop\n\t"
-+		"ssnop\n\t"
-+	/* Disable interrupts */
-+	/*	MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */
-+		"mfc0 $15, $12\n\t"
-+	/* Just a Hack to not to use reg 'at' which was causing problems on 4704 A2 */
-+		"li $14, -31746\n\t"
-+		"and $15, $15, $14\n\t"
-+		"mtc0 $15, $12\n\t"
-+		"eret\n\t"
-+		"nop\n\t"
-+		"nop\n\t"
-+		".set\tmips0"
-+	);
-+}
-+
-+/* The following MUST come right after handler() */
-+static void
-+BCMINITFN(afterhandler)(void)
-+{
-+}
-+
-+/*
-+ * Set the MIPS, backplane and PCI clocks as closely as possible.
-+ */
-+bool
-+BCMINITFN(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock)
-+{
-+	extifregs_t *eir = NULL;
-+	chipcregs_t *cc = NULL;
-+	mipsregs_t *mipsr = NULL;
-+	volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci, *clockcontrol_m2;
-+	uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, orig_ratio_cfg;
-+	uint32 pll_type, sync_mode;
-+	uint ic_size, ic_lsize;
-+	uint idx, i;
-+	typedef struct {
-+		uint32 mipsclock;
-+		uint16 n;
-+		uint32 sb;
-+		uint32 pci33;
-+		uint32 pci25;
-+	} n3m_table_t;
-+	static n3m_table_t BCMINITDATA(type1_table)[] = {
-+		{  96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /*  96.000 32.000 24.000 */
-+		{ 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */
-+		{ 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */
-+		{ 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */
-+		{ 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */
-+		{ 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */
-+		{ 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */
-+		{ 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */
-+		{ 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */
-+		{ 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */
-+		{ 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */
-+		{ 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */
-+		{ 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */
-+		{ 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */
-+		{ 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */
-+		{ 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */
-+		{ 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */
-+		{ 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */
-+		{ 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */
-+		{ 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */
-+	};
-+	typedef struct {
-+		uint32 mipsclock;
-+		uint16 n;
-+		uint32 m2; /* that is the clockcontrol_m2 */
-+	} type3_table_t;
-+	static type3_table_t type3_table[] = { /* for 5350, mips clock is always double sb clock */
-+		{ 150000000, 0x311, 0x4020005 },
-+		{ 200000000, 0x311, 0x4020003 },
-+	};
-+	typedef struct {
-+		uint32 mipsclock;
-+		uint32 sbclock;
-+		uint16 n;
-+		uint32 sb;
-+		uint32 pci33;
-+		uint32 m2;
-+		uint32 m3;
-+		uint32 ratio_cfg;
-+		uint32 ratio_parm;
-+	} n4m_table_t;
-+
-+	static n4m_table_t BCMINITDATA(type2_table)[] = {
-+		{ 180000000,  80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100,	 8, 0x012a00a9 },
-+		{ 180000000,  90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 11, 0x0aaa0555 },
-+		{ 200000000, 100000000, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 11, 0x0aaa0555 },
-+		{ 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
-+		{ 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
-+		{ 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
-+		{ 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100,  8, 0x012a00a9 },
-+		{ 240000000, 120000000,	0x0803,	0x01000200, 0x01020600,	0x01000200, 0x05000200, 11, 0x0aaa0555 },
-+		{ 252000000, 126000000,	0x0504,	0x01000100, 0x01020500,	0x01000100, 0x05000100, 11, 0x0aaa0555 },
-+		{ 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
-+		{ 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100,  8, 0x012a00a9 },
-+		{ 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100,  8, 0x012a00a9 },
-+		{ 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 },
-+		{ 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100,  8, 0x012a00a9 },
-+		{ 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 },
-+		{ 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100,  8, 0x012a00a9 },
-+		{ 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 11, 0x0aaa0555 }
-+	};
-+
-+	static n4m_table_t BCMINITDATA(type4_table)[] = {
-+		{ 192000000,  96000000, 0x0702,	0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 },
-+		{ 198000000,  99000000, 0x0603,	0x11020005, 0x11030011, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
-+		{ 200000000, 100000000, 0x0009,	0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 },
-+		{ 204000000, 102000000, 0x0c02, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
-+		{ 208000000, 104000000, 0x0802, 0x11030002, 0x11090005, 0x11030002, 0x04000003, 11, 0x0aaa0555 },
-+		{ 210000000, 105000000, 0x0209, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
-+		{ 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
-+		{ 224000000, 112000000, 0x0205, 0x11030002, 0x02002103, 0x11030002, 0x04000003, 11, 0x0aaa0555 },
-+		{ 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x01030305, 0x04000005,  8, 0x012a00a9 },
-+		{ 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
-+		{ 240000000, 102857143,	0x0109,	0x04000021, 0x01050203,	0x11030021, 0x04000003, 13, 0x254a14a9 },
-+		{ 240000000, 120000000,	0x0109,	0x11030002, 0x01050203,	0x11030002, 0x04000003, 11, 0x0aaa0555 },
-+		{ 252000000, 100800000,	0x0203,	0x04000009, 0x11050005,	0x02000209, 0x04000002,  9, 0x02520129 },
-+		{ 252000000, 126000000,	0x0203,	0x04000005, 0x11050005,	0x04000005, 0x04000002, 11, 0x0aaa0555 },
-+		{ 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555 },
-+		{ 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 13, 0x254a14a9 },
-+		{ 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 },
-+		{ 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 },
-+		{ 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002,  9, 0x02520129 },
-+		{ 300000000, 150000000, 0x0009, 0x04000005, 0x01030203, 0x04000005, 0x04000002, 11, 0x0aaa0555 }
-+	};
-+
-+	static n4m_table_t BCMINITDATA(type7_table)[] = {
-+		{ 183333333,  91666666, 0x0605,	0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 },
-+		{ 187500000,  93750000, 0x0a03,	0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 },
-+		{ 196875000,  98437500, 0x1003, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
-+		{ 200000000, 100000000, 0x0311, 0x04000011, 0x11030011, 0x04000009, 0x04000003, 11, 0x0aaa0555 },
-+		{ 200000000, 100000000, 0x0311, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 },
-+		{ 206250000, 103125000, 0x1103, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
-+		{ 212500000, 106250000,	0x0c05,	0x11020005, 0x01030303,	0x11020005, 0x04000005, 11, 0x0aaa0555 },
-+		{ 215625000, 107812500,	0x1203,	0x11090009, 0x11050005,	0x11020005, 0x04000005, 11, 0x0aaa0555 },
-+		{ 216666666, 108333333, 0x0805, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 },
-+		{ 225000000, 112500000, 0x0d03, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 },
-+		{ 233333333, 116666666, 0x0905, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 },
-+		{ 237500000, 118750000, 0x0e05, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
-+		{ 240000000, 120000000, 0x0b11, 0x11020009, 0x11210009, 0x11020009, 0x04000009, 11, 0x0aaa0555 },
-+		{ 250000000, 125000000, 0x0f03, 0x11020003, 0x11210003, 0x11020003, 0x04000003, 11, 0x0aaa0555 }
-+	};
-+
-+	ulong start, end, dst;
-+	bool ret = FALSE;
-+
-+	/* get index of the current core */
-+	idx = sb_coreidx(sbh);
-+	clockcontrol_m2 = NULL;
-+
-+	/* switch to extif or chipc core */
-+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+		pll_type = PLL_TYPE1;
-+		clockcontrol_n = &eir->clockcontrol_n;
-+		clockcontrol_sb = &eir->clockcontrol_sb;
-+		clockcontrol_pci = &eir->clockcontrol_pci;
-+		clockcontrol_m2 = &cc->clockcontrol_m2;
-+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
-+		if (pll_type == PLL_TYPE6) {
-+			clockcontrol_n = NULL;
-+			clockcontrol_sb = NULL;
-+			clockcontrol_pci = NULL;
-+		} else {
-+			clockcontrol_n = &cc->clockcontrol_n;
-+			clockcontrol_sb = &cc->clockcontrol_sb;
-+			clockcontrol_pci = &cc->clockcontrol_pci;
-+			clockcontrol_m2 = &cc->clockcontrol_m2;
-+		}
-+	} else
-+		goto done;
-+
-+	if (pll_type == PLL_TYPE6) {
-+		/* Silence compilers */
-+		orig_n = orig_sb = orig_pci = 0;
-+	} else {
-+		/* Store the current clock register values */
-+		orig_n = R_REG(clockcontrol_n);
-+		orig_sb = R_REG(clockcontrol_sb);
-+		orig_pci = R_REG(clockcontrol_pci);
-+	}
-+
-+	if (pll_type == PLL_TYPE1) {
-+		/* Keep the current PCI clock if not specified */
-+		if (pciclock == 0) {
-+			pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci));
-+			pciclock = (pciclock <= 25000000) ? 25000000 : 33000000;
-+		}
-+
-+		/* Search for the closest MIPS clock less than or equal to a preferred value */
-+		for (i = 0; i < ARRAYSIZE(BCMINIT(type1_table)); i++) {
-+			ASSERT(BCMINIT(type1_table)[i].mipsclock ==
-+			       sb_clock_rate(pll_type, BCMINIT(type1_table)[i].n, BCMINIT(type1_table)[i].sb));
-+			if (BCMINIT(type1_table)[i].mipsclock > mipsclock)
-+				break;
-+		}
-+		if (i == 0) {
-+			ret = FALSE;
-+			goto done;
-+		} else {
-+			ret = TRUE;
-+			i--;
-+		}
-+		ASSERT(BCMINIT(type1_table)[i].mipsclock <= mipsclock);
-+
-+		/* No PLL change */
-+		if ((orig_n == BCMINIT(type1_table)[i].n) &&
-+		    (orig_sb == BCMINIT(type1_table)[i].sb) &&
-+		    (orig_pci == BCMINIT(type1_table)[i].pci33))
-+			goto done;
-+
-+		/* Set the PLL controls */
-+		W_REG(clockcontrol_n, BCMINIT(type1_table)[i].n);
-+		W_REG(clockcontrol_sb, BCMINIT(type1_table)[i].sb);
-+		if (pciclock == 25000000)
-+			W_REG(clockcontrol_pci, BCMINIT(type1_table)[i].pci25);
-+		else
-+			W_REG(clockcontrol_pci, BCMINIT(type1_table)[i].pci33);
-+
-+		/* Reset */
-+		sb_watchdog(sbh, 1);
-+
-+		while (1);
-+	} else if ((pll_type == PLL_TYPE3) &&
-+		   (BCMINIT(sb_chip)(sbh) != BCM5365_DEVICE_ID)) {
-+		/* 5350 */
-+		/* Search for the closest MIPS clock less than or equal to a preferred value */
-+
-+		for (i = 0; i < ARRAYSIZE(type3_table); i++) {
-+			if (type3_table[i].mipsclock > mipsclock)
-+				break;
-+		}
-+		if (i == 0) {
-+			ret = FALSE;
-+			goto done;
-+		} else {
-+			ret = TRUE;
-+			i--;
-+		}
-+		ASSERT(type3_table[i].mipsclock <= mipsclock);
-+
-+		/* No PLL change */
-+		orig_m2 = R_REG(&cc->clockcontrol_m2);
-+		if ((orig_n == type3_table[i].n) &&
-+		    (orig_m2 == type3_table[i].m2)) {
-+			goto done;
-+		}
-+
-+		/* Set the PLL controls */
-+		W_REG(clockcontrol_n, type3_table[i].n);
-+		W_REG(clockcontrol_m2, type3_table[i].m2);
-+
-+		/* Reset */
-+		sb_watchdog(sbh, 1);
-+		while (1);
-+	} else if ((pll_type == PLL_TYPE2) ||
-+		   (pll_type == PLL_TYPE4) ||
-+		   (pll_type == PLL_TYPE6) ||
-+		   (pll_type == PLL_TYPE7)) {
-+		n4m_table_t *table = NULL, *te;
-+		uint tabsz = 0;
-+
-+		ASSERT(cc);
-+
-+		orig_mips = R_REG(&cc->clockcontrol_mips);
-+
-+		if (pll_type == PLL_TYPE6) {
-+			uint32 new_mips = 0;
-+
-+			ret = TRUE;
-+			if (mipsclock <= SB2MIPS_T6(CC_T6_M1))
-+				new_mips = CC_T6_MMASK;
-+
-+			if (orig_mips == new_mips)
-+				goto done;
-+
-+			W_REG(&cc->clockcontrol_mips, new_mips);
-+			goto end_fill;
-+		}
-+
-+		if (pll_type == PLL_TYPE2) {
-+			table = BCMINIT(type2_table);
-+			tabsz = ARRAYSIZE(BCMINIT(type2_table));
-+		} else if (pll_type == PLL_TYPE4) {
-+			table = BCMINIT(type4_table);
-+			tabsz = ARRAYSIZE(BCMINIT(type4_table));
-+		} else if (pll_type == PLL_TYPE7) {
-+			table = BCMINIT(type7_table);
-+			tabsz = ARRAYSIZE(BCMINIT(type7_table));
-+		} else
-+			ASSERT("No table for plltype" == NULL);
-+
-+		/* Store the current clock register values */
-+		orig_m2 = R_REG(&cc->clockcontrol_m2);
-+		orig_ratio_parm = 0;
-+		orig_ratio_cfg = 0;
-+
-+		/* Look up current ratio */
-+		for (i = 0; i < tabsz; i++) {
-+			if ((orig_n == table[i].n) &&
-+			    (orig_sb == table[i].sb) &&
-+			    (orig_pci == table[i].pci33) &&
-+			    (orig_m2 == table[i].m2) &&
-+			    (orig_mips == table[i].m3)) {
-+				orig_ratio_parm = table[i].ratio_parm;
-+				orig_ratio_cfg = table[i].ratio_cfg;
-+				break;
-+			}
-+		}
-+
-+		/* Search for the closest MIPS clock greater or equal to a preferred value */
-+		for (i = 0; i < tabsz; i++) {
-+			ASSERT(table[i].mipsclock ==
-+			       sb_clock_rate(pll_type, table[i].n, table[i].m3));
-+			if ((mipsclock <= table[i].mipsclock) &&
-+			    ((sbclock == 0) || (sbclock <= table[i].sbclock)))
-+				break;
-+		}
-+		if (i == tabsz) {
-+			ret = FALSE;
-+			goto done;
-+		} else {
-+			te = &table[i];
-+			ret = TRUE;
-+		}
-+
-+		/* No PLL change */
-+		if ((orig_n == te->n) &&
-+		    (orig_sb == te->sb) &&
-+		    (orig_pci == te->pci33) &&
-+		    (orig_m2 == te->m2) &&
-+		    (orig_mips == te->m3))
-+			goto done;
-+
-+		/* Set the PLL controls */
-+		W_REG(clockcontrol_n, te->n);
-+		W_REG(clockcontrol_sb, te->sb);
-+		W_REG(clockcontrol_pci, te->pci33);
-+		W_REG(&cc->clockcontrol_m2, te->m2);
-+		W_REG(&cc->clockcontrol_mips, te->m3);
-+
-+		/* Set the chipcontrol bit to change mipsref to the backplane divider if needed */
-+		if ((pll_type == PLL_TYPE7) &&
-+		    (te->sb != te->m2) &&
-+		    (sb_clock_rate(pll_type, te->n, te->m2) == 120000000))
-+			W_REG(&cc->chipcontrol, R_REG(&cc->chipcontrol) | 0x100);
-+
-+		/* No ratio change */
-+		if (orig_ratio_parm == te->ratio_parm)
-+			goto end_fill;
-+
-+		icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize);
-+
-+		/* Preload the code into the cache */
-+		start = ((ulong) &&start_fill) & ~(ic_lsize - 1);
-+		end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1);
-+		while (start < end) {
-+			cache_op(start, Fill_I);
-+			start += ic_lsize;
-+		}
-+
-+		/* Copy the handler */
-+		start = (ulong) &BCMINIT(handler);
-+		end = (ulong) &BCMINIT(afterhandler);
-+		dst = KSEG1ADDR(0x180);
-+		for (i = 0; i < (end - start); i += 4)
-+			*((ulong *)(dst + i)) = *((ulong *)(start + i));
-+
-+		/* Preload handler into the cache one line at a time */
-+		for (i = 0; i < (end - start); i += 4)
-+			cache_op(dst + i, Fill_I);
-+
-+		/* Clear BEV bit */
-+		MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV);
-+
-+		/* Enable interrupts */
-+		MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE));
-+
-+		/* Enable MIPS timer interrupt */
-+		if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) &&
-+		    !(mipsr = sb_setcore(sbh, SB_MIPS33, 0)))
-+			ASSERT(mipsr);
-+		W_REG(&mipsr->intmask, 1);
-+
-+	start_fill:
-+		/* step 1, set clock ratios */
-+		MTC0(C0_BROADCOM, 3, te->ratio_parm);
-+		MTC0(C0_BROADCOM, 1, te->ratio_cfg);
-+
-+		/* step 2: program timer intr */
-+		W_REG(&mipsr->timer, 100);
-+		(void) R_REG(&mipsr->timer);
-+
-+		/* step 3, switch to async */
-+		sync_mode = MFC0(C0_BROADCOM, 4);
-+		MTC0(C0_BROADCOM, 4, 1 << 22);
-+
-+		/* step 4, set cfg active */
-+		MTC0(C0_BROADCOM, 2, 0x9);
-+
-+
-+		/* steps 5 & 6 */
-+		__asm__ __volatile__ (
-+			".set\tmips3\n\t"
-+			"wait\n\t"
-+			".set\tmips0"
-+		);
-+
-+		/* step 7, clear cfg_active */
-+		MTC0(C0_BROADCOM, 2, 0);
-+
-+		/* Additional Step: set back to orig sync mode */
-+		MTC0(C0_BROADCOM, 4, sync_mode);
-+
-+		/* step 8, fake soft reset */
-+		MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4);
-+
-+	end_fill:
-+		/* step 9 set watchdog timer */
-+		sb_watchdog(sbh, 20);
-+		(void) R_REG(&cc->chipid);
-+
-+		/* step 11 */
-+		__asm__ __volatile__ (
-+			".set\tmips3\n\t"
-+			"sync\n\t"
-+			"wait\n\t"
-+			".set\tmips0"
-+		);
-+		while (1);
-+	}
-+
-+done:
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
-+
-+	return ret;
-+}
-+
-+/*
-+ *  This also must be run from the cache on 47xx
-+ *  so there are no mips core BIU ops in progress
-+ *  when the PFC is enabled.
-+ */
-+
-+static void
-+BCMINITFN(_enable_pfc)(uint32 mode)
-+{
-+	/* write range */
-+	*(volatile uint32 *)PFC_CR1 = 0xffff0000;
-+
-+	/* enable */
-+	*(volatile uint32 *)PFC_CR0 = mode;
-+}
-+
-+void
-+BCMINITFN(enable_pfc)(uint32 mode)
-+{
-+	ulong start, end;
-+	int i;
-+
-+	/* If auto then choose the correct mode for this
-+	   platform, currently we only ever select one mode */
-+	if (mode == PFC_AUTO)
-+		mode = PFC_INST;
-+
-+	/* enable prefetch cache if available */
-+	if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) {
-+		start = (ulong) &BCMINIT(_enable_pfc);
-+		end = (ulong) &BCMINIT(enable_pfc);
-+
-+		/* Preload handler into the cache one line at a time */
-+		for (i = 0; i < (end - start); i += 4)
-+			cache_op(start + i, Fill_I);
-+
-+		BCMINIT(_enable_pfc)(mode);
-+	}
-+}
-+
-+/* returns the ncdl value to be programmed into sdram_ncdl for calibration */
-+uint32
-+BCMINITFN(sb_memc_get_ncdl)(sb_t *sbh)
-+{
-+	sbmemcregs_t *memc;
-+	uint32 ret = 0;
-+	uint32 config, rd, wr, misc, dqsg, cd, sm, sd;
-+	uint idx, rev;
-+
-+	idx = sb_coreidx(sbh);
-+
-+	memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0);
-+	if (memc == 0)
-+		goto out;
-+
-+	rev = sb_corerev(sbh);
-+
-+	config = R_REG(&memc->config);
-+	wr = R_REG(&memc->wrncdlcor);
-+	rd = R_REG(&memc->rdncdlcor);
-+	misc = R_REG(&memc->miscdlyctl);
-+	dqsg = R_REG(&memc->dqsgatencdl);
-+
-+	rd &= MEMC_RDNCDLCOR_RD_MASK;
-+	wr &= MEMC_WRNCDLCOR_WR_MASK;
-+	dqsg &= MEMC_DQSGATENCDL_G_MASK;
-+
-+	if (config & MEMC_CONFIG_DDR) {
-+		ret = (wr << 16) | (rd << 8) | dqsg;
-+	} else {
-+		if (rev > 0)
-+			cd = rd;
-+		else
-+			cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD);
-+		sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT;
-+		sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT;
-+		ret = (sm << 16) | (sd << 8) | cd;
-+	}
-+
-+out:
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
-+
-+	return ret;
-+}
-+
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/sbpci.c
---- linux-2.6.16/arch/mips/bcm947xx/broadcom/sbpci.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/sbpci.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,534 @@
-+/*
-+ * Low-Level PCI and SB support for BCM47xx
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#include <typedefs.h>
-+#include <pcicfg.h>
-+#include <bcmdevs.h>
-+#include <sbconfig.h>
-+#include <osl.h>
-+#include <sbutils.h>
-+#include <sbpci.h>
-+#include <bcmendian.h>
-+#include <bcmutils.h>
-+#include <bcmnvram.h>
-+#include <hndmips.h>
-+
-+/* Can free sbpci_init() memory after boot */
-+#ifndef linux
-+#define __init
-+#endif
-+
-+/* Emulated configuration space */
-+static pci_config_regs sb_config_regs[SB_MAXCORES];
-+
-+/* Banned cores */
-+static uint16 pci_ban[32] = { 0 };
-+static uint pci_banned = 0;
-+
-+/* CardBus mode */
-+static bool cardbus = FALSE;
-+
-+/* Disable PCI host core */
-+static bool pci_disabled = FALSE;
-+
-+/*
-+ * Functions for accessing external PCI configuration space
-+ */
-+
-+/* Assume one-hot slot wiring */
-+#define PCI_SLOT_MAX 16
-+
-+static uint32
-+config_cmd(sb_t *sbh, uint bus, uint dev, uint func, uint off)
-+{
-+	uint coreidx;
-+	sbpciregs_t *regs;
-+	uint32 addr = 0;
-+
-+	/* CardBusMode supports only one device */
-+	if (cardbus && dev > 1)
-+		return 0;
-+
-+	coreidx = sb_coreidx(sbh);
-+	regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
-+
-+	/* Type 0 transaction */
-+	if (bus == 1) {
-+		/* Skip unwired slots */
-+		if (dev < PCI_SLOT_MAX) {
-+			/* Slide the PCI window to the appropriate slot */
-+			W_REG(&regs->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK));
-+			addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) |
-+				(func << 8) | (off & ~3);
-+		}
-+	}
-+
-+	/* Type 1 transaction */
-+	else {
-+		W_REG(&regs->sbtopci1, SBTOPCI_CFG1);
-+		addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3);
-+	}
-+
-+	sb_setcoreidx(sbh, coreidx);
-+
-+	return addr;
-+}
-+
-+static int
-+extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	uint32 addr, *reg = NULL, val;
-+	int ret = 0;
-+
-+	if (pci_disabled ||
-+	    !(addr = config_cmd(sbh, bus, dev, func, off)) ||
-+	    !(reg = (uint32 *) REG_MAP(addr, len)) ||
-+	    BUSPROBE(val, reg))
-+		val = 0xffffffff;
-+
-+	val >>= 8 * (off & 3);
-+	if (len == 4)
-+		*((uint32 *) buf) = val;
-+	else if (len == 2)
-+		*((uint16 *) buf) = (uint16) val;
-+	else if (len == 1)
-+		*((uint8 *) buf) = (uint8) val;
-+	else
-+		ret = -1;
-+
-+	if (reg)
-+		REG_UNMAP(reg);
-+
-+	return ret;
-+}
-+
-+static int
-+extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	uint32 addr, *reg = NULL, val;
-+	int ret = 0;
-+
-+	if (pci_disabled ||
-+	    !(addr = config_cmd(sbh, bus, dev, func, off)) ||
-+	    !(reg = (uint32 *) REG_MAP(addr, len)) ||
-+	    BUSPROBE(val, reg))
-+		goto done;
-+
-+	if (len == 4)
-+		val = *((uint32 *) buf);
-+	else if (len == 2) {
-+		val &= ~(0xffff << (8 * (off & 3)));
-+		val |= *((uint16 *) buf) << (8 * (off & 3));
-+	} else if (len == 1) {
-+		val &= ~(0xff << (8 * (off & 3)));
-+		val |= *((uint8 *) buf) << (8 * (off & 3));
-+	} else
-+		ret = -1;
-+
-+	W_REG(reg, val);
-+
-+ done:
-+	if (reg)
-+		REG_UNMAP(reg);
-+
-+	return ret;
-+}
-+
-+/*
-+ * Functions for accessing translated SB configuration space
-+ */
-+
-+static int
-+sb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	pci_config_regs *cfg;
-+
-+	if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
-+		return -1;
-+	cfg = &sb_config_regs[dev];
-+
-+	ASSERT(ISALIGNED(off, len));
-+	ASSERT(ISALIGNED((uintptr)buf, len));
-+
-+	if (len == 4)
-+		*((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off)));
-+	else if (len == 2)
-+		*((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off)));
-+	else if (len == 1)
-+		*((uint8 *) buf) = *((uint8 *)((ulong) cfg + off));
-+	else
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static int
-+sb_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	uint coreidx, n;
-+	void *regs;
-+	sbconfig_t *sb;
-+	pci_config_regs *cfg;
-+
-+	if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
-+		return -1;
-+	cfg = &sb_config_regs[dev];
-+
-+	ASSERT(ISALIGNED(off, len));
-+	ASSERT(ISALIGNED((uintptr)buf, len));
-+
-+	/* Emulate BAR sizing */
-+	if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) &&
-+	    len == 4 && *((uint32 *) buf) == ~0) {
-+		coreidx = sb_coreidx(sbh);
-+		if ((regs = sb_setcoreidx(sbh, dev))) {
-+			sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+			/* Highest numbered address match register */
-+			n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT;
-+			if (off == OFFSETOF(pci_config_regs, base[0]))
-+				cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1);
-+#if 0
-+			else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1)
-+				cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1);
-+			else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2)
-+				cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1);
-+			else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3)
-+				cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1);
-+#endif
-+		}
-+		sb_setcoreidx(sbh, coreidx);
-+		return 0;
-+	}
-+
-+	if (len == 4)
-+		*((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf));
-+	else if (len == 2)
-+		*((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf));
-+	else if (len == 1)
-+		*((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf);
-+	else
-+		return -1;
-+
-+	return 0;
-+}
-+
-+int
-+sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	if (bus == 0)
-+		return sb_read_config(sbh, bus, dev, func, off, buf, len);
-+	else
-+		return extpci_read_config(sbh, bus, dev, func, off, buf, len);
-+}
-+
-+int
-+sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	if (bus == 0)
-+		return sb_write_config(sbh, bus, dev, func, off, buf, len);
-+	else
-+		return extpci_write_config(sbh, bus, dev, func, off, buf, len);
-+}
-+
-+void
-+sbpci_ban(uint16 core)
-+{
-+	if (pci_banned < ARRAYSIZE(pci_ban))
-+		pci_ban[pci_banned++] = core;
-+}
-+
-+static int
-+sbpci_init_pci(sb_t *sbh)
-+{
-+	uint chip, chiprev, chippkg, host;
-+	uint32 boardflags;
-+	sbpciregs_t *pci;
-+	sbconfig_t *sb;
-+	uint32 val;
-+
-+	chip = sb_chip(sbh);
-+	chiprev = sb_chiprev(sbh);
-+	chippkg = sb_chippkg(sbh);
-+
-+	if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) {
-+		printf("PCI: no core\n");
-+		pci_disabled = TRUE;
-+		return -1;
-+	}
-+	sb_core_reset(sbh, 0);
-+
-+	boardflags = (uint32) getintvar(NULL, "boardflags");
-+
-+	if ((chip == BCM4310_DEVICE_ID) && (chiprev == 0))
-+		pci_disabled = TRUE;
-+
-+	/*
-+	 * The 200-pin BCM4712 package does not bond out PCI. Even when
-+	 * PCI is bonded out, some boards may leave the pins
-+	 * floating.
-+	 */
-+	if (((chip == BCM4712_DEVICE_ID) &&
-+	     ((chippkg == BCM4712SMALL_PKG_ID) ||
-+	      (chippkg == BCM4712MID_PKG_ID))) ||
-+		(chip == BCM5350_DEVICE_ID) ||
-+	    (boardflags & BFL_NOPCI))
-+		pci_disabled = TRUE;
-+
-+	/*
-+	 * If the PCI core should not be touched (disabled, not bonded
-+	 * out, or pins floating), do not even attempt to access core
-+	 * registers. Otherwise, try to determine if it is in host
-+	 * mode.
-+	 */
-+	if (pci_disabled)
-+		host = 0;
-+	else
-+		host = !BUSPROBE(val, &pci->control);
-+
-+	if (!host) {
-+		/* Disable PCI interrupts in client mode */
-+		sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF);
-+		W_REG(&sb->sbintvec, 0);
-+
-+		/* Disable the PCI bridge in client mode */
-+		sbpci_ban(SB_PCI);
-+		printf("PCI: Disabled\n");
-+	} else {
-+		/* Reset the external PCI bus and enable the clock */
-+		W_REG(&pci->control, 0x5);		/* enable the tristate drivers */
-+		W_REG(&pci->control, 0xd);		/* enable the PCI clock */
-+		OSL_DELAY(150);				/* delay > 100 us */
-+		W_REG(&pci->control, 0xf);		/* deassert PCI reset */
-+		W_REG(&pci->arbcontrol, PCI_INT_ARB);	/* use internal arbiter */
-+		OSL_DELAY(1);				/* delay 1 us */
-+
-+		/* Enable CardBusMode */
-+		cardbus = nvram_match("cardbus", "1");
-+		if (cardbus) {
-+			printf("PCI: Enabling CardBus\n");
-+			/* GPIO 1 resets the CardBus device on bcm94710ap */
-+			sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY);
-+			sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY);
-+			W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400);
-+		}
-+
-+		/* 64 MB I/O access window */
-+		W_REG(&pci->sbtopci0, SBTOPCI_IO);
-+		/* 64 MB configuration access window */
-+		W_REG(&pci->sbtopci1, SBTOPCI_CFG0);
-+		/* 1 GB memory access window */
-+		W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA);
-+
-+		/* Enable PCI bridge BAR0 prefetch and burst */
-+		val = 6;
-+		sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val));
-+
-+		/* Enable PCI interrupts */
-+		W_REG(&pci->intmask, PCI_INTA);
-+	}
-+	
-+	return 0;
-+}
-+
-+static int
-+sbpci_init_cores(sb_t *sbh)
-+{
-+	uint chip, chiprev, chippkg, coreidx, i;
-+	sbconfig_t *sb;
-+	pci_config_regs *cfg;
-+	void *regs;
-+	char varname[8];
-+	uint wlidx = 0;
-+	uint16 vendor, core;
-+	uint8 class, subclass, progif;
-+	uint32 val;
-+	uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK };
-+	uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT };
-+
-+	chip = sb_chip(sbh);
-+	chiprev = sb_chiprev(sbh);
-+	chippkg = sb_chippkg(sbh);
-+	coreidx = sb_coreidx(sbh);
-+
-+	/* Scan the SB bus */
-+	bzero(sb_config_regs, sizeof(sb_config_regs));
-+	for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) {
-+		cfg->vendor = 0xffff;
-+		if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs)))
-+			continue;
-+		sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+		/* Read ID register and parse vendor and core */
-+		val = R_REG(&sb->sbidhigh);
-+		vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT;
-+		core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT;
-+		progif = 0;
-+
-+		/* Check if this core is banned */
-+		for (i = 0; i < pci_banned; i++)
-+			if (core == pci_ban[i])
-+				break;
-+		if (i < pci_banned)
-+			continue;
-+
-+		/* Known vendor translations */
-+		switch (vendor) {
-+		case SB_VEND_BCM:
-+			vendor = VENDOR_BROADCOM;
-+			break;
-+		}
-+
-+		/* Determine class based on known core codes */
-+		switch (core) {
-+		case SB_ILINE20:
-+			class = PCI_CLASS_NET;
-+			subclass = PCI_NET_ETHER;
-+			core = BCM47XX_ILINE_ID;
-+			break;
-+		case SB_ILINE100:
-+			class = PCI_CLASS_NET;
-+			subclass = PCI_NET_ETHER;
-+			core = BCM4610_ILINE_ID;
-+			break;
-+		case SB_ENET:
-+			class = PCI_CLASS_NET;
-+			subclass = PCI_NET_ETHER;
-+			core = BCM47XX_ENET_ID;
-+			break;
-+		case SB_SDRAM:
-+		case SB_MEMC:
-+			class = PCI_CLASS_MEMORY;
-+			subclass = PCI_MEMORY_RAM;
-+			break;
-+		case SB_PCI:
-+#if 0
-+			class = PCI_CLASS_BRIDGE;
-+			subclass = PCI_BRIDGE_PCI;
-+			break;
-+#endif
-+		case SB_MIPS:
-+		case SB_MIPS33:
-+			class = PCI_CLASS_CPU;
-+			subclass = PCI_CPU_MIPS;
-+			break;
-+		case SB_CODEC:
-+			class = PCI_CLASS_COMM;
-+			subclass = PCI_COMM_MODEM;
-+			core = BCM47XX_V90_ID;
-+			break;
-+		case SB_USB:
-+			class = PCI_CLASS_SERIAL;
-+			subclass = PCI_SERIAL_USB;
-+			progif = 0x10; /* OHCI */
-+			core = BCM47XX_USB_ID;
-+			break;
-+		case SB_USB11H:
-+			class = PCI_CLASS_SERIAL;
-+			subclass = PCI_SERIAL_USB;
-+			progif = 0x10; /* OHCI */
-+			core = BCM47XX_USBH_ID;
-+			break;
-+		case SB_USB11D:
-+			class = PCI_CLASS_SERIAL;
-+			subclass = PCI_SERIAL_USB;
-+			core = BCM47XX_USBD_ID;
-+			break;
-+		case SB_IPSEC:
-+			class = PCI_CLASS_CRYPT;
-+			subclass = PCI_CRYPT_NETWORK;
-+			core = BCM47XX_IPSEC_ID;
-+			break;
-+		case SB_ROBO:
-+			class = PCI_CLASS_NET;
-+			subclass = PCI_NET_OTHER;
-+			core = BCM47XX_ROBO_ID;
-+			break;
-+		case SB_EXTIF:
-+		case SB_CC:
-+			class = PCI_CLASS_MEMORY;
-+			subclass = PCI_MEMORY_FLASH;
-+			break;
-+		case SB_D11:
-+			class = PCI_CLASS_NET;
-+			subclass = PCI_NET_OTHER;
-+			/* Let an nvram variable override this */
-+			sprintf(varname, "wl%did", wlidx);
-+			wlidx++;
-+			if ((core = getintvar(NULL, varname)) == 0) {
-+				if (chip == BCM4712_DEVICE_ID) {
-+					if (chippkg == BCM4712SMALL_PKG_ID)
-+						core = BCM4306_D11G_ID;
-+					else
-+						core = BCM4306_D11DUAL_ID;
-+				} else {
-+					/* 4310 */
-+					core = BCM4310_D11B_ID;
-+				}
-+			}
-+			break;
-+
-+		default:
-+			class = subclass = progif = 0xff;
-+			break;
-+		}
-+
-+		/* Supported translations */
-+		cfg->vendor = htol16(vendor);
-+		cfg->device = htol16(core);
-+		cfg->rev_id = chiprev;
-+		cfg->prog_if = progif;
-+		cfg->sub_class = subclass;
-+		cfg->base_class = class;
-+		cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0)));
-+		cfg->base[1] = 0;//htol32(sb_base(R_REG(&sb->sbadmatch1)));
-+		cfg->base[2] = 0;//htol32(sb_base(R_REG(&sb->sbadmatch2)));
-+		cfg->base[3] = 0;//htol32(sb_base(R_REG(&sb->sbadmatch3)));
-+		cfg->base[4] = 0;
-+		cfg->base[5] = 0;
-+		if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI)
-+			cfg->header_type = PCI_HEADER_BRIDGE;
-+		else
-+			cfg->header_type = PCI_HEADER_NORMAL;
-+		/* Save core interrupt flag */
-+		cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK;
-+		/* Default to MIPS shared interrupt 0 */
-+		cfg->int_line = 0;
-+		/* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */
-+		if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
-+		    (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
-+			sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+			val = R_REG(&sb->sbipsflag);
-+			for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) {
-+				if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin)
-+					break;
-+			}
-+			if (cfg->int_line > 4)
-+				cfg->int_line = 0;
-+		}
-+		/* Emulated core */
-+		*((uint32 *) &cfg->sprom_control) = 0xffffffff;
-+	}
-+
-+	sb_setcoreidx(sbh, coreidx);
-+	return 0;
-+}
-+
-+int __init
-+sbpci_init(sb_t *sbh)
-+{
-+	sbpci_init_pci(sbh);
-+	sbpci_init_cores(sbh);
-+	return 0;
-+}
-+
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/sbutils.c
---- linux-2.6.16/arch/mips/bcm947xx/broadcom/sbutils.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/sbutils.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,2370 @@
-+/*
-+ * Misc utility routines for accessing chip-specific features
-+ * of the SiliconBackplane-based Broadcom chips.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id$
-+ */
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <sbutils.h>
-+#include <bcmutils.h>
-+#include <bcmdevs.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <sbpci.h>
-+#include <pcicfg.h>
-+#include <sbextif.h>
-+#include <bcmsrom.h>
-+
-+/* debug/trace */
-+#define	SB_ERROR(args)
-+
-+
-+typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
-+typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
-+typedef bool (*sb_intrsenabled_t)(void *intr_arg);
-+
-+/* misc sb info needed by some of the routines */
-+typedef struct sb_info {
-+
-+	struct sb_pub  	sb;			/* back plane public state(must be first field of sb_info */
-+
-+	void	*osh;			/* osl os handle */
-+	void	*sdh;			/* bcmsdh handle */
-+
-+	void	*curmap;		/* current regs va */
-+	void	*regs[SB_MAXCORES];	/* other regs va */
-+
-+	uint	curidx;			/* current core index */
-+	uint	dev_coreid;		/* the core provides driver functions */
-+
-+	uint	gpioidx;		/* gpio control core index */
-+	uint	gpioid;			/* gpio control coretype */
-+
-+	uint	numcores;		/* # discovered cores */
-+	uint	coreid[SB_MAXCORES];	/* id of each core */
-+
-+	void	*intr_arg;		/* interrupt callback function arg */
-+	sb_intrsoff_t		intrsoff_fn;		/* function turns chip interrupts off */
-+	sb_intrsrestore_t	intrsrestore_fn;	/* function restore chip interrupts */
-+	sb_intrsenabled_t	intrsenabled_fn;	/* function to check if chip interrupts are enabled */
-+
-+} sb_info_t;
-+
-+/* local prototypes */
-+static sb_info_t * BCMINIT(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs,
-+	uint bustype, void *sdh, char **vars, int *varsz);
-+static void BCMINIT(sb_scan)(sb_info_t *si);
-+static uint sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val);
-+static uint _sb_coreidx(sb_info_t *si);
-+static uint sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit);
-+static uint BCMINIT(sb_pcidev2chip)(uint pcidev);
-+static uint BCMINIT(sb_chip2numcores)(uint chip);
-+static int sb_pci_fixcfg(sb_info_t *si);
-+
-+/* delay needed between the mdio control/ mdiodata register data access */
-+#define PR28829_DELAY() OSL_DELAY(10)
-+
-+
-+/* global variable to indicate reservation/release of gpio's*/
-+static uint32 sb_gpioreservation = 0;
-+
-+#define	SB_INFO(sbh)	(sb_info_t*)sbh
-+#define	SET_SBREG(sbh, r, mask, val)	W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val)))
-+#define	GOODCOREADDR(x)	(((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && ISALIGNED((x), SB_CORE_SIZE))
-+#define	GOODREGS(regs)	((regs) && ISALIGNED((uintptr)(regs), SB_CORE_SIZE))
-+#define	REGS2SB(va)	(sbconfig_t*) ((int8*)(va) + SBCONFIGOFF)
-+#define	GOODIDX(idx)	(((uint)idx) < SB_MAXCORES)
-+#define	BADIDX		(SB_MAXCORES+1)
-+#define	NOREV		-1
-+
-+#define PCI(si)		((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCI)) 
-+
-+/* sonicsrev */
-+#define	SONICS_2_2	(SBIDL_RV_2_2 >> SBIDL_RV_SHIFT)
-+#define	SONICS_2_3	(SBIDL_RV_2_3 >> SBIDL_RV_SHIFT)
-+
-+#define	R_SBREG(sbh, sbr)	sb_read_sbreg((sbh), (sbr))
-+#define	W_SBREG(sbh, sbr, v)	sb_write_sbreg((sbh), (sbr), (v))
-+#define	AND_SBREG(sbh, sbr, v)	W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v)))
-+#define	OR_SBREG(sbh, sbr, v)	W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v)))
-+
-+/*
-+ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
-+ * after core switching to avoid invalid register accesss inside ISR.
-+ */
-+#define INTR_OFF(si, intr_val) \
-+	if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) {	\
-+		intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
-+#define INTR_RESTORE(si, intr_val) \
-+	if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) {	\
-+		(*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
-+
-+/* dynamic clock control defines */
-+#define	LPOMINFREQ	25000			/* low power oscillator min */
-+#define	LPOMAXFREQ	43000			/* low power oscillator max */
-+#define	XTALMINFREQ	19800000		/* 20 MHz - 1% */
-+#define	XTALMAXFREQ	20200000		/* 20 MHz + 1% */
-+#define	PCIMINFREQ	25000000		/* 25 MHz */
-+#define	PCIMAXFREQ	34000000		/* 33 MHz + fudge */
-+
-+#define	ILP_DIV_5MHZ	0			/* ILP = 5 MHz */
-+#define	ILP_DIV_1MHZ	4			/* ILP = 1 MHz */
-+
-+#define MIN_DUMPBUFLEN  32	/* debug */
-+
-+/* GPIO Based LED powersave defines */
-+#define DEFAULT_GPIO_ONTIME	10
-+#define DEFAULT_GPIO_OFFTIME	90
-+
-+#define DEFAULT_GPIOTIMERVAL  ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME)
-+
-+static uint32
-+sb_read_sbreg(sb_info_t *si, volatile uint32 *sbr)
-+{
-+	uint32 val = R_REG(sbr);
-+
-+	return (val);
-+}
-+
-+static void
-+sb_write_sbreg(sb_info_t *si, volatile uint32 *sbr, uint32 v)
-+{
-+	W_REG(sbr, v);
-+}
-+
-+/* Using sb_kattach depends on SB_BUS support, either implicit  */
-+/* no limiting BCMBUSTYPE value) or explicit (value is SB_BUS). */
-+#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS)
-+
-+/* global kernel resource */
-+static sb_info_t ksi;
-+
-+/* generic kernel variant of sb_attach() */
-+sb_t * 
-+BCMINITFN(sb_kattach)()
-+{
-+	uint32 *regs;
-+
-+	if (ksi.curmap == NULL) {
-+		uint32 cid;
-+
-+		regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
-+		cid = R_REG((uint32 *)regs);
-+		if (((cid & CID_ID_MASK) == BCM4712_DEVICE_ID) &&
-+		    ((cid & CID_PKG_MASK) != BCM4712LARGE_PKG_ID) &&
-+		    ((cid & CID_REV_MASK) <= (3 << CID_REV_SHIFT))) {
-+			uint32 *scc, val;
-+
-+			scc = (uint32 *)((uchar*)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
-+			val = R_REG(scc);
-+			SB_ERROR(("    initial scc = 0x%x\n", val));
-+			val |= SCC_SS_XTAL;
-+			W_REG(scc, val);
-+		}
-+
-+		if (BCMINIT(sb_doattach)(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs,
-+			SB_BUS, NULL, NULL, NULL) == NULL) {
-+			return NULL;
-+		}
-+	}
-+
-+	return (sb_t *)&ksi;
-+}
-+#endif
-+
-+static sb_info_t  * 
-+BCMINITFN(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs,
-+	uint bustype, void *sdh, char **vars, int *varsz)
-+{
-+	uint origidx;
-+	chipcregs_t *cc;
-+	sbconfig_t *sb;
-+	uint32 w;
-+
-+	ASSERT(GOODREGS(regs));
-+
-+	bzero((uchar*)si, sizeof (sb_info_t));
-+
-+	si->sb.buscoreidx = si->gpioidx = BADIDX;
-+
-+	si->osh = osh;
-+	si->curmap = regs;
-+	si->sdh = sdh;
-+
-+	/* check to see if we are a sb core mimic'ing a pci core */
-+	if (bustype == PCI_BUS) {
-+		if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff)
-+			bustype = SB_BUS;
-+		else
-+			bustype = PCI_BUS;
-+	}
-+
-+	si->sb.bustype = bustype;
-+	if (si->sb.bustype != BUSTYPE(si->sb.bustype)) {
-+		SB_ERROR(("sb_doattach: bus type %d does not match configured bus type %d\n",
-+			  si->sb.bustype, BUSTYPE(si->sb.bustype)));
-+		return NULL;
-+	}
-+
-+	/* kludge to enable the clock on the 4306 which lacks a slowclock */
-+	if (BUSTYPE(si->sb.bustype) == PCI_BUS)
-+		sb_clkctl_xtal(&si->sb, XTAL|PLL, ON);
-+
-+	if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
-+		w = OSL_PCI_READ_CONFIG(osh, PCI_BAR0_WIN, sizeof (uint32));
-+		if (!GOODCOREADDR(w))
-+			OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32), SB_ENUM_BASE);
-+	}
-+
-+	/* initialize current core index value */
-+	si->curidx = _sb_coreidx(si);
-+
-+	if (si->curidx == BADIDX) {
-+		SB_ERROR(("sb_doattach: bad core index\n"));
-+		return NULL;
-+	}
-+
-+	/* get sonics backplane revision */
-+	sb = REGS2SB(si->curmap);
-+	si->sb.sonicsrev = (R_SBREG(si, &(sb)->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT;
-+
-+	/* keep and reuse the initial register mapping */
-+	origidx = si->curidx;
-+	if (BUSTYPE(si->sb.bustype) == SB_BUS)
-+		si->regs[origidx] = regs;
-+
-+	/* is core-0 a chipcommon core? */
-+	si->numcores = 1;
-+	cc = (chipcregs_t*) sb_setcoreidx(&si->sb, 0);
-+	if (sb_coreid(&si->sb) != SB_CC)
-+		cc = NULL;
-+
-+	/* determine chip id and rev */
-+	if (cc) {
-+		/* chip common core found! */
-+		si->sb.chip = R_REG(&cc->chipid) & CID_ID_MASK;
-+		si->sb.chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
-+		si->sb.chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
-+	} else {
-+		/* no chip common core -- must convert device id to chip id */
-+		if ((si->sb.chip = BCMINIT(sb_pcidev2chip)(devid)) == 0) {
-+			SB_ERROR(("sb_doattach: unrecognized device id 0x%04x\n", devid));
-+			sb_setcoreidx(&si->sb, origidx);
-+			return NULL;
-+		}
-+	}
-+
-+	/* get chipcommon rev */
-+	si->sb.ccrev = cc ? (int)sb_corerev(&si->sb) : NOREV;
-+
-+	/* determine numcores */
-+	if (cc && ((si->sb.ccrev == 4) || (si->sb.ccrev >= 6)))
-+		si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
-+	else
-+		si->numcores = BCMINIT(sb_chip2numcores)(si->sb.chip);
-+
-+	/* return to original core */
-+	sb_setcoreidx(&si->sb, origidx);
-+
-+	/* sanity checks */
-+	ASSERT(si->sb.chip);
-+
-+	/* scan for cores */
-+	BCMINIT(sb_scan)(si);
-+
-+	/* fixup necessary chip/core configurations */
-+	if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
-+		if (sb_pci_fixcfg(si)) {
-+			SB_ERROR(("sb_doattach: sb_pci_fixcfg failed\n"));
-+			return NULL;
-+		}
-+	}
-+	
-+	/* srom_var_init() depends on sb_scan() info */
-+	if (srom_var_init(si, si->sb.bustype, si->curmap, osh, vars, varsz)) {
-+		SB_ERROR(("sb_doattach: srom_var_init failed: bad srom\n"));
-+		return (NULL);
-+	}
-+	
-+	if (cc == NULL) {
-+		/*
-+		 * The chip revision number is hardwired into all
-+		 * of the pci function config rev fields and is
-+		 * independent from the individual core revision numbers.
-+		 * For example, the "A0" silicon of each chip is chip rev 0.
-+		 */
-+		if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
-+			w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32));
-+			si->sb.chiprev = w & 0xff;
-+		} else
-+			si->sb.chiprev = 0;
-+	}
-+
-+	/* gpio control core is required */
-+	if (!GOODIDX(si->gpioidx)) {
-+		SB_ERROR(("sb_doattach: gpio control core not found\n"));
-+		return NULL;
-+	}
-+
-+	/* get boardtype and boardrev */
-+	switch (BUSTYPE(si->sb.bustype)) {
-+	case PCI_BUS:
-+		/* do a pci config read to get subsystem id and subvendor id */
-+		w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32));
-+		si->sb.boardvendor = w & 0xffff;
-+		si->sb.boardtype = (w >> 16) & 0xffff;
-+		break;
-+
-+	case SB_BUS:
-+	case JTAG_BUS:
-+		si->sb.boardvendor = VENDOR_BROADCOM;
-+		if ((si->sb.boardtype = getintvar(NULL, "boardtype")) == 0)
-+			si->sb.boardtype = 0xffff;
-+		break;
-+	}
-+
-+	if (si->sb.boardtype == 0) {
-+		SB_ERROR(("sb_doattach: unknown board type\n"));
-+		ASSERT(si->sb.boardtype);
-+	}
-+
-+	/* setup the GPIO based LED powersave register */
-+	if (si->sb.ccrev >= 16) {
-+		w = getintvar(*vars, "gpiotimerval");
-+		if (!w)
-+			w = DEFAULT_GPIOTIMERVAL; 
-+		sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), ~0, w);
-+	}
-+
-+
-+	return (si);
-+}
-+
-+uint
-+sb_coreid(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+
-+	return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
-+}
-+
-+uint
-+sb_coreidx(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->curidx);
-+}
-+
-+/* return current index of core */
-+static uint
-+_sb_coreidx(sb_info_t *si)
-+{
-+	sbconfig_t *sb;
-+	uint32 sbaddr = 0;
-+
-+	ASSERT(si);
-+
-+	switch (BUSTYPE(si->sb.bustype)) {
-+	case SB_BUS:
-+		sb = REGS2SB(si->curmap);
-+		sbaddr = sb_base(R_SBREG(si, &sb->sbadmatch0));
-+		break;
-+
-+	case PCI_BUS:
-+		sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32));
-+		break;
-+
-+#ifdef BCMJTAG
-+	case JTAG_BUS:
-+		sbaddr = (uint32)si->curmap;
-+		break;
-+#endif	/* BCMJTAG */
-+
-+	default:
-+		ASSERT(0);
-+	}
-+
-+	if (!GOODCOREADDR(sbaddr))
-+		return BADIDX;
-+
-+	return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE);
-+}
-+
-+uint
-+sb_corevendor(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+
-+	return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
-+}
-+
-+uint
-+sb_corerev(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+	uint sbidh;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+	sbidh = R_SBREG(si, &(sb)->sbidhigh);
-+
-+	return (SBCOREREV(sbidh));
-+}
-+
-+void *
-+sb_osh(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return si->osh;
-+}
-+
-+#define	SBTML_ALLOW	(SBTML_PE | SBTML_FGC | SBTML_FL_MASK)
-+
-+/* set/clear sbtmstatelow core-specific flags */
-+uint32
-+sb_coreflags(sb_t *sbh, uint32 mask, uint32 val)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+	uint32 w;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+
-+	ASSERT((val & ~mask) == 0);
-+	ASSERT((mask & ~SBTML_ALLOW) == 0);
-+
-+	/* mask and set */
-+	if (mask || val) {
-+		w = (R_SBREG(si, &sb->sbtmstatelow) & ~mask) | val;
-+		W_SBREG(si, &sb->sbtmstatelow, w);
-+	}
-+
-+	/* return the new value */
-+	return (R_SBREG(si, &sb->sbtmstatelow) & SBTML_ALLOW);
-+}
-+
-+/* set/clear sbtmstatehigh core-specific flags */
-+uint32
-+sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+	uint32 w;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+
-+	ASSERT((val & ~mask) == 0);
-+	ASSERT((mask & ~SBTMH_FL_MASK) == 0);
-+
-+	/* mask and set */
-+	if (mask || val) {
-+		w = (R_SBREG(si, &sb->sbtmstatehigh) & ~mask) | val;
-+		W_SBREG(si, &sb->sbtmstatehigh, w);
-+	}
-+
-+	/* return the new value */
-+	return (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
-+}
-+
-+/* caller needs to take care of core-specific bist hazards */
-+int
-+sb_corebist(sb_t *sbh, uint coreid, uint coreunit)
-+{
-+	uint32 sblo;
-+	uint coreidx;
-+	sb_info_t *si;
-+	int result = 0;
-+
-+	si = SB_INFO(sbh);
-+
-+	coreidx = sb_findcoreidx(si, coreid, coreunit);
-+	if (!GOODIDX(coreidx))
-+		result = BCME_ERROR;
-+	else {
-+		sblo = sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), 0, 0);
-+		sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, (sblo | SBTML_FGC | SBTML_BE));
-+		
-+		SPINWAIT(((sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTD) == 0), 100000);
-+	
-+		if (sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTF)
-+			result = BCME_ERROR;
-+
-+		sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, sblo);
-+	}
-+
-+	return result;
-+}
-+
-+bool
-+sb_iscoreup(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+
-+	return ((R_SBREG(si, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ_MASK | SBTML_CLK)) == SBTML_CLK);
-+}
-+
-+/*
-+ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
-+ * switch back to the original core, and return the new value.
-+ */
-+static uint
-+sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val)
-+{
-+	uint origidx;
-+	uint32 *r;
-+	uint w;
-+	uint intr_val = 0;
-+
-+	ASSERT(GOODIDX(coreidx));
-+	ASSERT(regoff < SB_CORE_SIZE);
-+	ASSERT((val & ~mask) == 0);
-+
-+	INTR_OFF(si, intr_val);
-+
-+	/* save current core index */
-+	origidx = sb_coreidx(&si->sb);
-+
-+	/* switch core */
-+	r = (uint32*) ((uchar*) sb_setcoreidx(&si->sb, coreidx) + regoff);
-+
-+	/* mask and set */
-+	if (mask || val) {
-+		if (regoff >= SBCONFIGOFF) {
-+			w = (R_SBREG(si, r) & ~mask) | val;
-+			W_SBREG(si, r, w);
-+		} else {
-+			w = (R_REG(r) & ~mask) | val;
-+			W_REG(r, w);
-+		}
-+	}
-+
-+	/* readback */
-+	if (regoff >= SBCONFIGOFF)
-+		w = R_SBREG(si, r);
-+	else
-+		w = R_REG(r);
-+
-+	/* restore core index */
-+	if (origidx != coreidx)
-+		sb_setcoreidx(&si->sb, origidx);
-+
-+	INTR_RESTORE(si, intr_val);
-+	return (w);
-+}
-+
-+#define DWORD_ALIGN(x)  (x & ~(0x03))
-+#define BYTE_POS(x) (x & 0x3)
-+#define WORD_POS(x) (x & 0x1)
-+
-+#define BYTE_SHIFT(x)  (8 * BYTE_POS(x))
-+#define WORD_SHIFT(x)  (16 * WORD_POS(x))
-+
-+#define BYTE_VAL(a, x) ((a >> BYTE_SHIFT(x)) & 0xFF)
-+#define WORD_VAL(a, x) ((a >> WORD_SHIFT(x)) & 0xFFFF)
-+
-+#define read_pci_cfg_byte(a) \
-+	(BYTE_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xff)
-+
-+#define read_pci_cfg_write(a) \
-+	(WORD_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xffff)
-+
-+
-+/* scan the sb enumerated space to identify all cores */
-+static void
-+BCMINITFN(sb_scan)(sb_info_t *si)
-+{
-+	uint origidx;
-+	uint i;
-+	bool pci;
-+	uint pciidx;
-+	uint pcirev;
-+
-+
-+
-+	/* numcores should already be set */
-+	ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
-+
-+	/* save current core index */
-+	origidx = sb_coreidx(&si->sb);
-+
-+	si->sb.buscorerev = NOREV;
-+	si->sb.buscoreidx = BADIDX;
-+
-+	si->gpioidx = BADIDX;
-+
-+	pci = FALSE;
-+	pcirev = NOREV;
-+	pciidx = BADIDX;
-+
-+	for (i = 0; i < si->numcores; i++) {
-+		sb_setcoreidx(&si->sb, i);
-+		si->coreid[i] = sb_coreid(&si->sb);
-+
-+		if (si->coreid[i] == SB_PCI) { 
-+			pciidx = i;
-+			pcirev = sb_corerev(&si->sb);
-+			pci = TRUE;
-+		}
-+	}
-+	if (pci) {
-+		si->sb.buscoretype = SB_PCI;
-+		si->sb.buscorerev = pcirev; 
-+		si->sb.buscoreidx = pciidx; 
-+	}
-+
-+	/*
-+	 * Find the gpio "controlling core" type and index.
-+	 * Precedence:
-+	 * - if there's a chip common core - use that
-+	 * - else if there's a pci core (rev >= 2) - use that
-+	 * - else there had better be an extif core (4710 only)
-+	 */
-+	if (GOODIDX(sb_findcoreidx(si, SB_CC, 0))) {
-+		si->gpioidx = sb_findcoreidx(si, SB_CC, 0);
-+		si->gpioid = SB_CC;
-+	} else if (PCI(si) && (si->sb.buscorerev >= 2)) {
-+		si->gpioidx = si->sb.buscoreidx;
-+		si->gpioid = SB_PCI;
-+	} else if (sb_findcoreidx(si, SB_EXTIF, 0)) {
-+		si->gpioidx = sb_findcoreidx(si, SB_EXTIF, 0);
-+		si->gpioid = SB_EXTIF;
-+	} else
-+		ASSERT(si->gpioidx != BADIDX);
-+
-+	/* return to original core index */
-+	sb_setcoreidx(&si->sb, origidx);
-+}
-+
-+/* may be called with core in reset */
-+void
-+sb_detach(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint idx;
-+
-+	si = SB_INFO(sbh);
-+
-+	if (si == NULL)
-+		return;
-+
-+	if (BUSTYPE(si->sb.bustype) == SB_BUS)
-+		for (idx = 0; idx < SB_MAXCORES; idx++)
-+			if (si->regs[idx]) {
-+				REG_UNMAP(si->regs[idx]);
-+				si->regs[idx] = NULL;
-+			}
-+
-+	if (si != &ksi)
-+		MFREE(si->osh, si, sizeof (sb_info_t));
-+}
-+
-+/* use pci dev id to determine chip id for chips not having a chipcommon core */
-+static uint
-+BCMINITFN(sb_pcidev2chip)(uint pcidev)
-+{
-+	if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID))
-+		return (BCM4710_DEVICE_ID);
-+	if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID))
-+		return (BCM4402_DEVICE_ID);
-+	if (pcidev == BCM4401_ENET_ID)
-+		return (BCM4402_DEVICE_ID);
-+	if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID))
-+		return (BCM4307_DEVICE_ID);
-+	if (pcidev == BCM4301_DEVICE_ID)
-+		return (BCM4301_DEVICE_ID);
-+
-+	return (0);
-+}
-+
-+/* convert chip number to number of i/o cores */
-+static uint
-+BCMINITFN(sb_chip2numcores)(uint chip)
-+{
-+	if (chip == BCM4710_DEVICE_ID)
-+		return (9);
-+	if (chip == BCM4402_DEVICE_ID)
-+		return (3);
-+	if ((chip == BCM4301_DEVICE_ID) || (chip == BCM4307_DEVICE_ID))
-+		return (5);
-+	if (chip == BCM4306_DEVICE_ID)	/* < 4306c0 */
-+		return (6);
-+	if (chip == BCM4704_DEVICE_ID)
-+		return (9);
-+	if (chip == BCM5365_DEVICE_ID)
-+		return (7);
-+
-+	SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip));
-+	ASSERT(0);
-+	return (1);
-+}
-+
-+/* return index of coreid or BADIDX if not found */
-+static uint
-+sb_findcoreidx( sb_info_t *si, uint coreid, uint coreunit)
-+{
-+	uint found;
-+	uint i;
-+
-+	found = 0;
-+
-+	for (i = 0; i < si->numcores; i++)
-+		if (si->coreid[i] == coreid) {
-+			if (found == coreunit)
-+				return (i);
-+			found++;
-+		}
-+
-+	return (BADIDX);
-+}
-+
-+/* 
-+ * this function changes logical "focus" to the indiciated core, 
-+ * must be called with interrupt off.
-+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
-+ */
-+void*
-+sb_setcoreidx(sb_t *sbh, uint coreidx)
-+{
-+	sb_info_t *si;
-+	uint32 sbaddr;
-+
-+	si = SB_INFO(sbh);
-+
-+	if (coreidx >= si->numcores)
-+		return (NULL);
-+	
-+	/*
-+	 * If the user has provided an interrupt mask enabled function,
-+	 * then assert interrupts are disabled before switching the core.
-+	 */
-+	ASSERT((si->intrsenabled_fn == NULL) || !(*(si)->intrsenabled_fn)((si)->intr_arg));
-+
-+	sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE);
-+
-+	switch (BUSTYPE(si->sb.bustype)) {
-+	case SB_BUS:
-+		/* map new one */
-+		if (!si->regs[coreidx]) {
-+			si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE);
-+			ASSERT(GOODREGS(si->regs[coreidx]));
-+		}
-+		si->curmap = si->regs[coreidx];
-+		break;
-+
-+	case PCI_BUS:
-+		/* point bar0 window */
-+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr);
-+		break;
-+
-+#ifdef BCMJTAG
-+	case JTAG_BUS:
-+		/* map new one */
-+		if (!si->regs[coreidx]) {
-+			si->regs[coreidx] = (void *)sbaddr;
-+			ASSERT(GOODREGS(si->regs[coreidx]));
-+		}
-+		si->curmap = si->regs[coreidx];
-+		break;
-+#endif	/* BCMJTAG */
-+	}
-+
-+	si->curidx = coreidx;
-+
-+	return (si->curmap);
-+}
-+
-+/* 
-+ * this function changes logical "focus" to the indiciated core, 
-+ * must be called with interrupt off.
-+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
-+ */
-+void*
-+sb_setcore(sb_t *sbh, uint coreid, uint coreunit)
-+{
-+	sb_info_t *si;
-+	uint idx;
-+
-+	si = SB_INFO(sbh);
-+	idx = sb_findcoreidx(si, coreid, coreunit);
-+	if (!GOODIDX(idx))
-+		return (NULL);
-+
-+	return (sb_setcoreidx(sbh, idx));
-+}
-+
-+/* return chip number */
-+uint
-+BCMINITFN(sb_chip)(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.chip);
-+}
-+
-+/* return chip revision number */
-+uint
-+BCMINITFN(sb_chiprev)(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.chiprev);
-+}
-+
-+/* return chip common revision number */
-+uint
-+BCMINITFN(sb_chipcrev)(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.ccrev);
-+}
-+
-+/* return chip package option */
-+uint
-+BCMINITFN(sb_chippkg)(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.chippkg);
-+}
-+
-+/* return PCI core rev. */
-+uint
-+BCMINITFN(sb_pcirev)(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.buscorerev);
-+}
-+
-+bool
-+BCMINITFN(sb_war16165)(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	return (PCI(si) && (si->sb.buscorerev <= 10));
-+}
-+
-+/* return board vendor id */
-+uint
-+BCMINITFN(sb_boardvendor)(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.boardvendor);
-+}
-+
-+/* return boardtype */
-+uint
-+BCMINITFN(sb_boardtype)(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	char *var;
-+
-+	si = SB_INFO(sbh);
-+
-+	if (BUSTYPE(si->sb.bustype) == SB_BUS && si->sb.boardtype == 0xffff) {
-+		/* boardtype format is a hex string */
-+		si->sb.boardtype = getintvar(NULL, "boardtype");
-+
-+		/* backward compatibility for older boardtype string format */
-+		if ((si->sb.boardtype == 0) && (var = getvar(NULL, "boardtype"))) {
-+			if (!strcmp(var, "bcm94710dev"))
-+				si->sb.boardtype = BCM94710D_BOARD;
-+			else if (!strcmp(var, "bcm94710ap"))
-+				si->sb.boardtype = BCM94710AP_BOARD;
-+			else if (!strcmp(var, "bu4710"))
-+				si->sb.boardtype = BU4710_BOARD;
-+			else if (!strcmp(var, "bcm94702mn"))
-+				si->sb.boardtype = BCM94702MN_BOARD;
-+			else if (!strcmp(var, "bcm94710r1"))
-+				si->sb.boardtype = BCM94710R1_BOARD;
-+			else if (!strcmp(var, "bcm94710r4"))
-+				si->sb.boardtype = BCM94710R4_BOARD;
-+			else if (!strcmp(var, "bcm94702cpci"))
-+				si->sb.boardtype = BCM94702CPCI_BOARD;
-+			else if (!strcmp(var, "bcm95380_rr"))
-+				si->sb.boardtype = BCM95380RR_BOARD;
-+		}
-+	}
-+
-+	return (si->sb.boardtype);
-+}
-+
-+/* return bus type of sbh device */
-+uint
-+sb_bus(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->sb.bustype);
-+}
-+
-+/* return bus core type */
-+uint
-+sb_buscoretype(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	return (si->sb.buscoretype);
-+}
-+
-+/* return bus core revision */
-+uint
-+sb_buscorerev(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	si = SB_INFO(sbh);
-+
-+	return (si->sb.buscorerev);
-+}
-+
-+/* return list of found cores */
-+uint
-+sb_corelist(sb_t *sbh, uint coreid[])
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint)));
-+	return (si->numcores);
-+}
-+
-+/* return current register mapping */
-+void *
-+sb_coreregs(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	ASSERT(GOODREGS(si->curmap));
-+
-+	return (si->curmap);
-+}
-+
-+
-+/* do buffered registers update */
-+void
-+sb_commit(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	uint intr_val = 0;
-+
-+	si = SB_INFO(sbh);
-+
-+	origidx = si->curidx;
-+	ASSERT(GOODIDX(origidx));
-+
-+	INTR_OFF(si, intr_val);
-+
-+	/* switch over to chipcommon core if there is one, else use pci */
-+	if (si->sb.ccrev != NOREV) {
-+		chipcregs_t *ccregs = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0);
-+
-+		/* do the buffer registers update */
-+		W_REG(&ccregs->broadcastaddress, SB_COMMIT);
-+		W_REG(&ccregs->broadcastdata, 0x0);
-+	} else if (PCI(si)) {
-+		sbpciregs_t *pciregs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0);
-+
-+		/* do the buffer registers update */
-+		W_REG(&pciregs->bcastaddr, SB_COMMIT);
-+		W_REG(&pciregs->bcastdata, 0x0);
-+	} else
-+		ASSERT(0);
-+
-+	/* restore core index */
-+	sb_setcoreidx(sbh, origidx);
-+	INTR_RESTORE(si, intr_val);
-+}
-+
-+/* reset and re-enable a core */
-+void
-+sb_core_reset(sb_t *sbh, uint32 bits)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+	volatile uint32 dummy;
-+
-+	si = SB_INFO(sbh);
-+	ASSERT(GOODREGS(si->curmap));
-+	sb = REGS2SB(si->curmap);
-+
-+	/*
-+	 * Must do the disable sequence first to work for arbitrary current core state.
-+	 */
-+	sb_core_disable(sbh, bits);
-+
-+	/*
-+	 * Now do the initialization sequence.
-+	 */
-+
-+	/* set reset while enabling the clock and forcing them on throughout the core */
-+	W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits));
-+	dummy = R_SBREG(si, &sb->sbtmstatelow);
-+	OSL_DELAY(1);
-+
-+	if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_SERR) {
-+		W_SBREG(si, &sb->sbtmstatehigh, 0);
-+	}
-+	if ((dummy = R_SBREG(si, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
-+		AND_SBREG(si, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
-+	}
-+
-+	/* clear reset and allow it to propagate throughout the core */
-+	W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
-+	dummy = R_SBREG(si, &sb->sbtmstatelow);
-+	OSL_DELAY(1);
-+
-+	/* leave clock enabled */
-+	W_SBREG(si, &sb->sbtmstatelow, (SBTML_CLK | bits));
-+	dummy = R_SBREG(si, &sb->sbtmstatelow);
-+	OSL_DELAY(1);
-+}
-+
-+void
-+sb_core_tofixup(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+
-+	si = SB_INFO(sbh);
-+
-+	if ( (BUSTYPE(si->sb.bustype) != PCI_BUS) || (PCI(si) && (si->sb.buscorerev >= 5)) )
-+		return;
-+
-+	ASSERT(GOODREGS(si->curmap));
-+	sb = REGS2SB(si->curmap);
-+
-+	if (BUSTYPE(si->sb.bustype) == SB_BUS) {
-+		SET_SBREG(si, &sb->sbimconfiglow,
-+			  SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+			  (0x5 << SBIMCL_RTO_SHIFT) | 0x3);
-+	} else {
-+		if (sb_coreid(sbh) == SB_PCI) {
-+			SET_SBREG(si, &sb->sbimconfiglow,
-+				  SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+				  (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
-+		} else {
-+			SET_SBREG(si, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
-+		}
-+	}
-+
-+	sb_commit(sbh);
-+}
-+
-+/*
-+ * Set the initiator timeout for the "master core".
-+ * The master core is defined to be the core in control
-+ * of the chip and so it issues accesses to non-memory
-+ * locations (Because of dma *any* core can access memeory).
-+ *
-+ * The routine uses the bus to decide who is the master:
-+ *	SB_BUS => mips
-+ *	JTAG_BUS => chipc
-+ *	PCI_BUS => pci
-+ *
-+ * This routine exists so callers can disable initiator
-+ * timeouts so accesses to very slow devices like otp
-+ * won't cause an abort. The routine allows arbitrary
-+ * settings of the service and request timeouts, though.
-+ *
-+ * Returns the timeout state before changing it or -1
-+ * on error.
-+ */
-+
-+#define	TO_MASK	(SBIMCL_RTO_MASK | SBIMCL_STO_MASK)
-+
-+uint32
-+sb_set_initiator_to(sb_t *sbh, uint32 to)
-+{
-+	sb_info_t *si;
-+	uint origidx, idx;
-+	uint intr_val = 0;
-+	uint32 tmp, ret = 0xffffffff;
-+	sbconfig_t *sb;
-+
-+	si = SB_INFO(sbh);
-+
-+	if ((to & ~TO_MASK) != 0)
-+		return ret;
-+
-+	/* Figure out the master core */
-+	idx = BADIDX;
-+	switch (BUSTYPE(si->sb.bustype)) {
-+	case PCI_BUS:
-+		idx = si->sb.buscoreidx; 
-+		break;
-+	case JTAG_BUS:
-+		idx = SB_CC_IDX;
-+		break;
-+	case SB_BUS:
-+		if ((idx = sb_findcoreidx(si, SB_MIPS33, 0)) == BADIDX)
-+			idx = sb_findcoreidx(si, SB_MIPS, 0);
-+		break;
-+	default:
-+		ASSERT(0);
-+	}
-+	if (idx == BADIDX)
-+		return ret;
-+
-+	INTR_OFF(si, intr_val);
-+	origidx = sb_coreidx(sbh);
-+
-+	sb = REGS2SB(sb_setcoreidx(sbh, idx));
-+
-+	tmp = R_SBREG(si, &sb->sbimconfiglow);
-+	ret = tmp & TO_MASK;
-+	W_SBREG(si, &sb->sbimconfiglow, (tmp & ~TO_MASK) | to);
-+
-+	sb_commit(sbh);
-+	sb_setcoreidx(sbh, origidx);
-+	INTR_RESTORE(si, intr_val);
-+	return ret;
-+}
-+
-+void
-+sb_core_disable(sb_t *sbh, uint32 bits)
-+{
-+	sb_info_t *si;
-+	volatile uint32 dummy;
-+	uint32 rej;
-+	sbconfig_t *sb;
-+
-+	si = SB_INFO(sbh);
-+
-+	ASSERT(GOODREGS(si->curmap));
-+	sb = REGS2SB(si->curmap);
-+
-+	/* if core is already in reset, just return */
-+	if (R_SBREG(si, &sb->sbtmstatelow) & SBTML_RESET)
-+		return;
-+
-+	/* reject value changed between sonics 2.2 and 2.3 */
-+	if (si->sb.sonicsrev == SONICS_2_2)
-+		rej = (1 << SBTML_REJ_SHIFT);
-+	else
-+		rej = (2 << SBTML_REJ_SHIFT);
-+
-+	/* if clocks are not enabled, put into reset and return */
-+	if ((R_SBREG(si, &sb->sbtmstatelow) & SBTML_CLK) == 0)
-+		goto disable;
-+
-+	/* set target reject and spin until busy is clear (preserve core-specific bits) */
-+	OR_SBREG(si, &sb->sbtmstatelow, rej);
-+	dummy = R_SBREG(si, &sb->sbtmstatelow);
-+	OSL_DELAY(1);
-+	SPINWAIT((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000);
-+
-+ 	if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) {
-+		OR_SBREG(si, &sb->sbimstate, SBIM_RJ);
-+		dummy = R_SBREG(si, &sb->sbimstate);
-+		OSL_DELAY(1);
-+		SPINWAIT((R_SBREG(si, &sb->sbimstate) & SBIM_BY), 100000);
-+	}
-+
-+	/* set reset and reject while enabling the clocks */
-+	W_SBREG(si, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | rej | SBTML_RESET));
-+	dummy = R_SBREG(si, &sb->sbtmstatelow);
-+	OSL_DELAY(10);
-+
-+	/* don't forget to clear the initiator reject bit */
-+	if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT)
-+		AND_SBREG(si, &sb->sbimstate, ~SBIM_RJ);
-+
-+disable:
-+	/* leave reset and reject asserted */
-+	W_SBREG(si, &sb->sbtmstatelow, (bits | rej | SBTML_RESET));
-+	OSL_DELAY(1);
-+}
-+
-+/* set chip watchdog reset timer to fire in 'ticks' backplane cycles */
-+void
-+sb_watchdog(sb_t *sbh, uint ticks)
-+{
-+	sb_info_t *si = SB_INFO(sbh);
-+
-+	/* instant NMI */
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		sb_corereg(si, 0, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
-+		break;
-+	case SB_EXTIF:
-+		sb_corereg(si, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks);
-+		break;
-+	}
-+}
-+
-+
-+/*
-+ * Configure the pci core for pci client (NIC) action
-+ * coremask is the bitvec of cores by index to be enabled.
-+ */
-+void
-+sb_pci_setup(sb_t *sbh, uint coremask)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+	sbpciregs_t *pciregs;
-+	uint32 sbflag;
-+	uint32 w;
-+	uint idx;
-+
-+	si = SB_INFO(sbh);
-+
-+	/* if not pci bus, we're done */
-+	if (BUSTYPE(si->sb.bustype) != PCI_BUS)
-+		return;
-+
-+	ASSERT(PCI(si));
-+	ASSERT(si->sb.buscoreidx != BADIDX);
-+
-+	/* get current core index */
-+	idx = si->curidx;
-+
-+	/* we interrupt on this backplane flag number */
-+	ASSERT(GOODREGS(si->curmap));
-+	sb = REGS2SB(si->curmap);
-+	sbflag = R_SBREG(si, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
-+
-+	/* switch over to pci core */
-+	pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->sb.buscoreidx);
-+	sb = REGS2SB(pciregs);
-+
-+	/*
-+	 * Enable sb->pci interrupts.  Assume
-+	 * PCI rev 2.3 support was added in pci core rev 6 and things changed..
-+	 */
-+	if ((PCI(si) && ((si->sb.buscorerev) >= 6))) {
-+		/* pci config write to set this core bit in PCIIntMask */
-+		w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32));
-+		w |= (coremask << PCI_SBIM_SHIFT);
-+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w);
-+	} else {
-+		/* set sbintvec bit for our flag number */
-+		OR_SBREG(si, &sb->sbintvec, (1 << sbflag));
-+	}
-+
-+	if (PCI(si)) {
-+		OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST));
-+		if (si->sb.buscorerev >= 11)
-+			OR_REG(&pciregs->sbtopci2, SBTOPCI_RC_READMULTI);
-+		if (si->sb.buscorerev < 5) {
-+			SET_SBREG(si, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+				(0x3 << SBIMCL_RTO_SHIFT) | 0x2);
-+			sb_commit(sbh);
-+		}
-+	}
-+
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
-+}
-+
-+uint32
-+sb_base(uint32 admatch)
-+{
-+	uint32 base;
-+	uint type;
-+
-+	type = admatch & SBAM_TYPE_MASK;
-+	ASSERT(type < 3);
-+
-+	base = 0;
-+
-+	if (type == 0) {
-+		base = admatch & SBAM_BASE0_MASK;
-+	} else if (type == 1) {
-+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
-+		base = admatch & SBAM_BASE1_MASK;
-+	} else if (type == 2) {
-+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
-+		base = admatch & SBAM_BASE2_MASK;
-+	}
-+
-+	return (base);
-+}
-+
-+uint32
-+sb_size(uint32 admatch)
-+{
-+	uint32 size;
-+	uint type;
-+
-+	type = admatch & SBAM_TYPE_MASK;
-+	ASSERT(type < 3);
-+
-+	size = 0;
-+
-+	if (type == 0) {
-+		size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1);
-+	} else if (type == 1) {
-+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
-+		size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1);
-+	} else if (type == 2) {
-+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
-+		size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1);
-+	}
-+
-+	return (size);
-+}
-+
-+/* return the core-type instantiation # of the current core */
-+uint
-+sb_coreunit(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint idx;
-+	uint coreid;
-+	uint coreunit;
-+	uint i;
-+
-+	si = SB_INFO(sbh);
-+	coreunit = 0;
-+
-+	idx = si->curidx;
-+
-+	ASSERT(GOODREGS(si->curmap));
-+	coreid = sb_coreid(sbh);
-+
-+	/* count the cores of our type */
-+	for (i = 0; i < idx; i++)
-+		if (si->coreid[i] == coreid)
-+			coreunit++;
-+
-+	return (coreunit);
-+}
-+
-+static INLINE uint32
-+factor6(uint32 x)
-+{
-+	switch (x) {
-+	case CC_F6_2:	return 2;
-+	case CC_F6_3:	return 3;
-+	case CC_F6_4:	return 4;
-+	case CC_F6_5:	return 5;
-+	case CC_F6_6:	return 6;
-+	case CC_F6_7:	return 7;
-+	default:	return 0;
-+	}
-+}
-+
-+/* calculate the speed the SB would run at given a set of clockcontrol values */
-+uint32
-+sb_clock_rate(uint32 pll_type, uint32 n, uint32 m)
-+{
-+	uint32 n1, n2, clock, m1, m2, m3, mc;
-+
-+	n1 = n & CN_N1_MASK;
-+	n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT;
-+
-+	if (pll_type == PLL_TYPE6) {
-+		if (m & CC_T6_MMASK)
-+			return CC_T6_M1;
-+		else
-+			return CC_T6_M0;
-+	} else if ((pll_type == PLL_TYPE1) ||
-+		   (pll_type == PLL_TYPE3) ||
-+		   (pll_type == PLL_TYPE4) ||
-+		   (pll_type == PLL_TYPE7)) {
-+		n1 = factor6(n1);
-+		n2 += CC_F5_BIAS;
-+	} else if (pll_type == PLL_TYPE2) {
-+		n1 += CC_T2_BIAS;
-+		n2 += CC_T2_BIAS;
-+		ASSERT((n1 >= 2) && (n1 <= 7));
-+		ASSERT((n2 >= 5) && (n2 <= 23));
-+	} else if (pll_type == PLL_TYPE5) {
-+		return (100000000);
-+	} else
-+		ASSERT(0);
-+	/* PLL types 3 and 7 use BASE2 (25Mhz) */
-+	if ((pll_type == PLL_TYPE3) ||
-+	    (pll_type == PLL_TYPE7)) { 
-+		clock =  CC_CLOCK_BASE2 * n1 * n2;
-+	}
-+	else 
-+		clock = CC_CLOCK_BASE1 * n1 * n2;
-+
-+	if (clock == 0)
-+		return 0;
-+
-+	m1 = m & CC_M1_MASK;
-+	m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT;
-+	m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
-+	mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
-+
-+	if ((pll_type == PLL_TYPE1) ||
-+	    (pll_type == PLL_TYPE3) ||
-+	    (pll_type == PLL_TYPE4) ||
-+	    (pll_type == PLL_TYPE7)) {
-+		m1 = factor6(m1);
-+		if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE3))
-+			m2 += CC_F5_BIAS;
-+		else
-+			m2 = factor6(m2);
-+		m3 = factor6(m3);
-+
-+		switch (mc) {
-+		case CC_MC_BYPASS:	return (clock);
-+		case CC_MC_M1:		return (clock / m1);
-+		case CC_MC_M1M2:	return (clock / (m1 * m2));
-+		case CC_MC_M1M2M3:	return (clock / (m1 * m2 * m3));
-+		case CC_MC_M1M3:	return (clock / (m1 * m3));
-+		default:		return (0);
-+		}
-+	} else {
-+		ASSERT(pll_type == PLL_TYPE2);
-+
-+		m1 += CC_T2_BIAS;
-+		m2 += CC_T2M2_BIAS;
-+		m3 += CC_T2_BIAS;
-+		ASSERT((m1 >= 2) && (m1 <= 7));
-+		ASSERT((m2 >= 3) && (m2 <= 10));
-+		ASSERT((m3 >= 2) && (m3 <= 7));
-+
-+		if ((mc & CC_T2MC_M1BYP) == 0)
-+			clock /= m1;
-+		if ((mc & CC_T2MC_M2BYP) == 0)
-+			clock /= m2;
-+		if ((mc & CC_T2MC_M3BYP) == 0)
-+			clock /= m3;
-+
-+		return(clock);
-+	}
-+}
-+
-+/* returns the current speed the SB is running at */
-+uint32
-+sb_clock(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	extifregs_t *eir;
-+	chipcregs_t *cc;
-+	uint32 n, m;
-+	uint idx;
-+	uint32 pll_type, rate;
-+	uint intr_val = 0;
-+
-+	si = SB_INFO(sbh);
-+	idx = si->curidx;
-+	pll_type = PLL_TYPE1;
-+
-+	INTR_OFF(si, intr_val);
-+
-+	/* switch to extif or chipc core */
-+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+		n = R_REG(&eir->clockcontrol_n);
-+		m = R_REG(&eir->clockcontrol_sb);
-+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
-+		n = R_REG(&cc->clockcontrol_n);
-+		if (pll_type == PLL_TYPE6)
-+			m = R_REG(&cc->clockcontrol_mips);
-+		else if (pll_type == PLL_TYPE3)
-+		{
-+			// Added by Chen-I for 5365 
-+			if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) 	
-+				m = R_REG(&cc->clockcontrol_sb);
-+			else
-+				m = R_REG(&cc->clockcontrol_m2);
-+		}
-+		else
-+			m = R_REG(&cc->clockcontrol_sb);
-+	} else {
-+		INTR_RESTORE(si, intr_val);
-+		return 0;
-+	}
-+
-+	// Added by Chen-I for 5365 
-+	if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID)
-+	{
-+		rate = 100000000;
-+	}
-+	else
-+	{	
-+		/* calculate rate */
-+		rate = sb_clock_rate(pll_type, n, m);
-+		if (pll_type == PLL_TYPE3)
-+			rate = rate / 2;
-+	}
-+
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
-+
-+	INTR_RESTORE(si, intr_val);
-+
-+	return rate;
-+}
-+
-+/* change logical "focus" to the gpio core for optimized access */
-+void*
-+sb_gpiosetcore(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	return (sb_setcoreidx(sbh, si->gpioidx));
-+}
-+
-+/* mask&set gpiocontrol bits */
-+uint32
-+sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
-+{
-+	sb_info_t *si;
-+	uint regoff;
-+
-+	si = SB_INFO(sbh);
-+	regoff = 0;
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* gpios could be shared on router platforms */
-+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
-+		mask = priority ? (sb_gpioreservation & mask) :
-+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
-+		val &= mask;
-+	}
-+
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpiocontrol);
-+		break;
-+
-+	case SB_PCI:
-+		regoff = OFFSETOF(sbpciregs_t, gpiocontrol);
-+		break;
-+
-+	case SB_EXTIF:
-+		return (0);
-+	}
-+
-+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
-+}
-+
-+/* mask&set gpio output enable bits */
-+uint32
-+sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
-+{
-+	sb_info_t *si;
-+	uint regoff;
-+
-+	si = SB_INFO(sbh);
-+	regoff = 0;
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* gpios could be shared on router platforms */
-+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
-+		mask = priority ? (sb_gpioreservation & mask) :
-+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
-+		val &= mask;
-+	}
-+
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpioouten);
-+		break;
-+
-+	case SB_PCI:
-+		regoff = OFFSETOF(sbpciregs_t, gpioouten);
-+		break;
-+
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpio[0].outen);
-+		break;
-+	}
-+
-+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
-+}
-+
-+/* mask&set gpio output bits */
-+uint32
-+sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
-+{
-+	sb_info_t *si;
-+	uint regoff;
-+
-+	si = SB_INFO(sbh);
-+	regoff = 0;
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* gpios could be shared on router platforms */
-+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
-+		mask = priority ? (sb_gpioreservation & mask) :
-+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
-+		val &= mask;
-+	}
-+
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpioout);
-+		break;
-+
-+	case SB_PCI:
-+		regoff = OFFSETOF(sbpciregs_t, gpioout);
-+		break;
-+
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpio[0].out);
-+		break;
-+	}
-+
-+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
-+}
-+
-+/* reserve one gpio */
-+uint32
-+sb_gpioreserve(sb_t *sbh, uint32 gpio_bitmask, uint8 priority)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */
-+	if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority))  {
-+		ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority));
-+		return -1;
-+	}
-+	/* make sure only one bit is set */
-+	if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
-+		ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1)));
-+		return -1;
-+	}
-+
-+	/* already reserved */
-+	if (sb_gpioreservation & gpio_bitmask)
-+		return -1;
-+	/* set reservation */
-+	sb_gpioreservation |= gpio_bitmask;
-+
-+	return sb_gpioreservation;
-+}
-+
-+/* release one gpio */
-+/* 
-+ * releasing the gpio doesn't change the current value on the GPIO last write value 
-+ * persists till some one overwrites it
-+*/
-+
-+uint32
-+sb_gpiorelease(sb_t *sbh, uint32 gpio_bitmask, uint8 priority)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */
-+	if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority))  {
-+		ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority));
-+		return -1;
-+	}
-+	/* make sure only one bit is set */
-+	if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
-+		ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1)));
-+		return -1;
-+	}
-+	
-+	/* already released */
-+	if (!(sb_gpioreservation & gpio_bitmask))
-+		return -1;
-+
-+	/* clear reservation */
-+	sb_gpioreservation &= ~gpio_bitmask;
-+
-+	return sb_gpioreservation;
-+}
-+
-+/* return the current gpioin register value */
-+uint32
-+sb_gpioin(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint regoff;
-+
-+	si = SB_INFO(sbh);
-+	regoff = 0;
-+
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpioin);
-+		break;
-+
-+	case SB_PCI:
-+		regoff = OFFSETOF(sbpciregs_t, gpioin);
-+		break;
-+
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpioin);
-+		break;
-+	}
-+
-+	return (sb_corereg(si, si->gpioidx, regoff, 0, 0));
-+}
-+
-+/* mask&set gpio interrupt polarity bits */
-+uint32
-+sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
-+{
-+	sb_info_t *si;
-+	uint regoff;
-+
-+	si = SB_INFO(sbh);
-+	regoff = 0;
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* gpios could be shared on router platforms */
-+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
-+		mask = priority ? (sb_gpioreservation & mask) :
-+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
-+		val &= mask;
-+	}
-+
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
-+		break;
-+
-+	case SB_PCI:
-+		/* pci gpio implementation does not support interrupt polarity */
-+		ASSERT(0);
-+		break;
-+
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpiointpolarity);
-+		break;
-+	}
-+
-+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
-+}
-+
-+/* mask&set gpio interrupt mask bits */
-+uint32
-+sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
-+{
-+	sb_info_t *si;
-+	uint regoff;
-+
-+	si = SB_INFO(sbh);
-+	regoff = 0;
-+
-+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
-+
-+	/* gpios could be shared on router platforms */
-+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
-+		mask = priority ? (sb_gpioreservation & mask) :
-+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
-+		val &= mask;
-+	}
-+
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpiointmask);
-+		break;
-+
-+	case SB_PCI:
-+		/* pci gpio implementation does not support interrupt mask */
-+		ASSERT(0);
-+		break;
-+
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpiointmask);
-+		break;
-+	}
-+
-+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
-+}
-+
-+/* assign the gpio to an led */
-+uint32
-+sb_gpioled(sb_t *sbh, uint32 mask, uint32 val)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	if (si->sb.ccrev < 16)
-+		return -1;
-+
-+	/* gpio led powersave reg */
-+	return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask, val));
-+}
-+
-+/* mask&set gpio timer val */
-+uint32 
-+sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 gpiotimerval)
-+{
-+	sb_info_t *si;
-+	si = SB_INFO(sbh);
-+
-+	if (si->sb.ccrev < 16)
-+		return -1;
-+
-+	return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), mask, gpiotimerval));
-+}
-+
-+
-+/* return the slow clock source - LPO, XTAL, or PCI */
-+static uint
-+sb_slowclk_src(sb_info_t *si)
-+{
-+	chipcregs_t *cc;
-+
-+
-+	ASSERT(sb_coreid(&si->sb) == SB_CC);
-+
-+	if (si->sb.ccrev < 6) {
-+		if ((BUSTYPE(si->sb.bustype) == PCI_BUS)
-+			&& (OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)) & PCI_CFG_GPIO_SCS))
-+			return (SCC_SS_PCI);
-+		else
-+			return (SCC_SS_XTAL);
-+	} else if (si->sb.ccrev < 10) {
-+		cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx);
-+		return (R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK);
-+	} else	/* Insta-clock */
-+		return (SCC_SS_XTAL);
-+}
-+
-+/* return the ILP (slowclock) min or max frequency */
-+static uint
-+sb_slowclk_freq(sb_info_t *si, bool max)
-+{
-+	chipcregs_t *cc;
-+	uint32 slowclk;
-+	uint div;
-+
-+
-+	ASSERT(sb_coreid(&si->sb) == SB_CC);
-+
-+	cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx);
-+
-+	/* shouldn't be here unless we've established the chip has dynamic clk control */
-+	ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL);
-+
-+	slowclk = sb_slowclk_src(si);
-+	if (si->sb.ccrev < 6) {
-+		if (slowclk == SCC_SS_PCI)
-+			return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64));
-+		else
-+			return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32));
-+	} else if (si->sb.ccrev < 10) {
-+		div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1);
-+		if (slowclk == SCC_SS_LPO)
-+			return (max? LPOMAXFREQ : LPOMINFREQ);
-+		else if (slowclk == SCC_SS_XTAL)
-+			return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div));
-+		else if (slowclk == SCC_SS_PCI)
-+			return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div));
-+		else
-+			ASSERT(0);
-+	} else {
-+		/* Chipc rev 10 is InstaClock */
-+		div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHIFT;
-+		div = 4 * (div + 1);
-+		return (max ? XTALMAXFREQ : (XTALMINFREQ/div));
-+	}
-+	return (0);
-+}
-+
-+static void
-+sb_clkctl_setdelay(sb_info_t *si, void *chipcregs)
-+{
-+	chipcregs_t * cc;
-+	uint slowmaxfreq, pll_delay, slowclk;
-+	uint pll_on_delay, fref_sel_delay;
-+
-+	pll_delay = PLL_DELAY;
-+
-+	/* If the slow clock is not sourced by the xtal then add the xtal_on_delay
-+	 * since the xtal will also be powered down by dynamic clk control logic.
-+	 */
-+	slowclk = sb_slowclk_src(si);
-+	if (slowclk != SCC_SS_XTAL)
-+		pll_delay += XTAL_ON_DELAY;
-+
-+	/* Starting with 4318 it is ILP that is used for the delays */
-+	slowmaxfreq = sb_slowclk_freq(si, (si->sb.ccrev >= 10) ? FALSE : TRUE);
-+
-+	pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
-+	fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
-+
-+	cc = (chipcregs_t *)chipcregs;
-+	W_REG(&cc->pll_on_delay, pll_on_delay);
-+	W_REG(&cc->fref_sel_delay, fref_sel_delay);
-+}
-+
-+int
-+sb_pwrctl_slowclk(void *sbh, bool set, uint *div)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	chipcregs_t *cc;
-+	uint intr_val = 0;
-+	uint err = 0;
-+	
-+	si = SB_INFO(sbh);
-+
-+	/* chipcommon cores prior to rev6 don't support slowclkcontrol */
-+	if (si->sb.ccrev < 6)
-+		return 1;
-+
-+	/* chipcommon cores rev10 are a whole new ball game */
-+	if (si->sb.ccrev >= 10)
-+		return 1;
-+
-+	if (set && ((*div % 4) || (*div < 4)))
-+		return 2;
-+	
-+	INTR_OFF(si, intr_val);
-+	origidx = si->curidx;
-+	cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
-+	ASSERT(cc != NULL);
-+	
-+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) {
-+		err = 3;
-+		goto done;
-+	}
-+
-+	if (set) {
-+		SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, ((*div / 4 - 1) << SCC_CD_SHIFT));
-+		sb_clkctl_setdelay(sbh, (void *)cc);
-+	} else
-+		*div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1);
-+
-+done:
-+	sb_setcoreidx(sbh, origidx);
-+	INTR_RESTORE(si, intr_val);
-+	return err;
-+}
-+
-+/* initialize power control delay registers */
-+void sb_clkctl_init(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	chipcregs_t *cc;
-+
-+	si = SB_INFO(sbh);
-+
-+	origidx = si->curidx;
-+
-+	if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
-+		return;
-+
-+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
-+		goto done;
-+
-+	/* set all Instaclk chip ILP to 1 MHz */
-+	if (si->sb.ccrev >= 10)
-+		SET_REG(&cc->system_clk_ctl, SYCC_CD_MASK, (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
-+	
-+	sb_clkctl_setdelay(si, (void *)cc);
-+
-+done:
-+	sb_setcoreidx(sbh, origidx);
-+}
-+void sb_pwrctl_init(sb_t *sbh)
-+{
-+sb_clkctl_init(sbh);
-+}
-+/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
-+uint16
-+sb_clkctl_fast_pwrup_delay(sb_t *sbh)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	chipcregs_t *cc;
-+	uint slowminfreq;
-+	uint16 fpdelay;
-+	uint intr_val = 0;
-+
-+	si = SB_INFO(sbh);
-+	fpdelay = 0;
-+	origidx = si->curidx;
-+
-+	INTR_OFF(si, intr_val);
-+
-+	if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
-+		goto done;
-+
-+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
-+		goto done;
-+
-+	slowminfreq = sb_slowclk_freq(si, FALSE);
-+	fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq;
-+
-+done:
-+	sb_setcoreidx(sbh, origidx);
-+	INTR_RESTORE(si, intr_val);
-+	return (fpdelay);
-+}
-+uint16 sb_pwrctl_fast_pwrup_delay(sb_t *sbh)
-+{
-+return sb_clkctl_fast_pwrup_delay(sbh);
-+}
-+/* turn primary xtal and/or pll off/on */
-+int
-+sb_clkctl_xtal(sb_t *sbh, uint what, bool on)
-+{
-+	sb_info_t *si;
-+	uint32 in, out, outen;
-+
-+	si = SB_INFO(sbh);
-+
-+	switch (BUSTYPE(si->sb.bustype)) {
-+		case PCI_BUS:
-+
-+			in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32));
-+			out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
-+			outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32));
-+
-+			/*
-+			 * Avoid glitching the clock if GPRS is already using it.
-+			 * We can't actually read the state of the PLLPD so we infer it
-+			 * by the value of XTAL_PU which *is* readable via gpioin.
-+			 */
-+			if (on && (in & PCI_CFG_GPIO_XTAL))
-+				return (0);
-+
-+			if (what & XTAL)
-+				outen |= PCI_CFG_GPIO_XTAL;
-+			if (what & PLL)
-+				outen |= PCI_CFG_GPIO_PLL;
-+
-+			if (on) {
-+				/* turn primary xtal on */
-+				if (what & XTAL) {
-+					out |= PCI_CFG_GPIO_XTAL;
-+					if (what & PLL)
-+						out |= PCI_CFG_GPIO_PLL;
-+					OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
-+					OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
-+					OSL_DELAY(XTAL_ON_DELAY);
-+				}
-+
-+				/* turn pll on */
-+				if (what & PLL) {
-+					out &= ~PCI_CFG_GPIO_PLL;
-+					OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
-+					OSL_DELAY(2000);
-+				}
-+			} else {
-+				if (what & XTAL)
-+					out &= ~PCI_CFG_GPIO_XTAL;
-+				if (what & PLL)
-+					out |= PCI_CFG_GPIO_PLL;
-+				OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
-+				OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
-+			}
-+
-+		default:
-+			return (-1);
-+	}
-+
-+	return (0);
-+}
-+
-+int sb_pwrctl_xtal(sb_t *sbh, uint what, bool on)
-+{
-+return sb_clkctl_xtal(sbh,what,on);
-+}
-+
-+/* set dynamic clk control mode (forceslow, forcefast, dynamic) */
-+/*   returns true if ignore pll off is set and false if it is not */
-+bool
-+sb_clkctl_clk(sb_t *sbh, uint mode)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	chipcregs_t *cc;
-+	uint32 scc;
-+	bool forcefastclk=FALSE;
-+	uint intr_val = 0;
-+
-+	si = SB_INFO(sbh);
-+
-+	/* chipcommon cores prior to rev6 don't support dynamic clock control */
-+	if (si->sb.ccrev < 6)
-+		return (FALSE);
-+
-+	/* chipcommon cores rev10 are a whole new ball game */
-+	if (si->sb.ccrev >= 10)
-+		return (FALSE);
-+
-+	INTR_OFF(si, intr_val);
-+
-+	origidx = si->curidx;
-+
-+	cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
-+	ASSERT(cc != NULL);
-+
-+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
-+		goto done;
-+
-+	switch (mode) {
-+	case CLK_FAST:	/* force fast (pll) clock */
-+		/* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
-+		sb_clkctl_xtal(&si->sb, XTAL, ON);
-+
-+		SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
-+		break;
-+
-+	case CLK_DYNAMIC:	/* enable dynamic clock control */
-+		scc = R_REG(&cc->slow_clk_ctl);
-+		scc &= ~(SCC_FS | SCC_IP | SCC_XC);
-+		if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
-+			scc |= SCC_XC;
-+		W_REG(&cc->slow_clk_ctl, scc);
-+
-+		/* for dynamic control, we have to release our xtal_pu "force on" */
-+		if (scc & SCC_XC)
-+			sb_clkctl_xtal(&si->sb, XTAL, OFF);
-+		break;
-+
-+	default:
-+		ASSERT(0);
-+	}
-+
-+	/* Is the h/w forcing the use of the fast clk */
-+	forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP);
-+
-+done:
-+	sb_setcoreidx(sbh, origidx);
-+	INTR_RESTORE(si, intr_val);
-+	return (forcefastclk);
-+}
-+
-+bool sb_pwrctl_clk(sb_t *sbh, uint mode)
-+{
-+return sb_clkctl_clk(sbh, mode);
-+}
-+/* register driver interrupt disabling and restoring callback functions */
-+void
-+sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg)
-+{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	si->intr_arg = intr_arg;
-+	si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn;
-+	si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn;
-+	si->intrsenabled_fn = (sb_intrsenabled_t)intrsenabled_fn;
-+	/* save current core id.  when this function called, the current core
-+	 * must be the core which provides driver functions(il, et, wl, etc.)
-+	 */
-+	si->dev_coreid = si->coreid[si->curidx];
-+}
-+
-+
-+void
-+sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice, 
-+	uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif)
-+{
-+	uint vendor, core, unit;
-+	uint chip, chippkg;
-+	char varname[8];
-+	uint8 class, subclass, progif;
-+	
-+	vendor = sb_corevendor(sbh);
-+	core = sb_coreid(sbh);
-+	unit = sb_coreunit(sbh);
-+
-+	chip = BCMINIT(sb_chip)(sbh);
-+	chippkg = BCMINIT(sb_chippkg)(sbh);
-+
-+	progif = 0;
-+	
-+	/* Known vendor translations */
-+	switch (vendor) {
-+	case SB_VEND_BCM:
-+		vendor = VENDOR_BROADCOM;
-+		break;
-+	}
-+
-+	/* Determine class based on known core codes */
-+	switch (core) {
-+	case SB_ILINE20:
-+		class = PCI_CLASS_NET;
-+		subclass = PCI_NET_ETHER;
-+		core = BCM47XX_ILINE_ID;
-+		break;
-+	case SB_ENET:
-+		class = PCI_CLASS_NET;
-+		subclass = PCI_NET_ETHER;
-+		core = BCM47XX_ENET_ID;
-+		break;
-+	case SB_SDRAM:
-+	case SB_MEMC:
-+		class = PCI_CLASS_MEMORY;
-+		subclass = PCI_MEMORY_RAM;
-+		break;
-+	case SB_PCI:
-+		class = PCI_CLASS_BRIDGE;
-+		subclass = PCI_BRIDGE_PCI;
-+		break;
-+	case SB_MIPS:
-+	case SB_MIPS33:
-+		class = PCI_CLASS_CPU;
-+		subclass = PCI_CPU_MIPS;
-+		break;
-+	case SB_CODEC:
-+		class = PCI_CLASS_COMM;
-+		subclass = PCI_COMM_MODEM;
-+		core = BCM47XX_V90_ID;
-+		break;
-+	case SB_USB:
-+		class = PCI_CLASS_SERIAL;
-+		subclass = PCI_SERIAL_USB;
-+		progif = 0x10; /* OHCI */
-+		core = BCM47XX_USB_ID;
-+		break;
-+	case SB_USB11H:
-+		class = PCI_CLASS_SERIAL;
-+		subclass = PCI_SERIAL_USB;
-+		progif = 0x10; /* OHCI */
-+		core = BCM47XX_USBH_ID;
-+		break;
-+	case SB_USB11D:
-+		class = PCI_CLASS_SERIAL;
-+		subclass = PCI_SERIAL_USB;
-+		core = BCM47XX_USBD_ID;
-+		break;
-+	case SB_IPSEC:
-+		class = PCI_CLASS_CRYPT;
-+		subclass = PCI_CRYPT_NETWORK;
-+		core = BCM47XX_IPSEC_ID;
-+		break;
-+	case SB_ROBO:
-+		class = PCI_CLASS_NET;
-+		subclass = PCI_NET_OTHER;
-+		core = BCM47XX_ROBO_ID;
-+		break;
-+	case SB_EXTIF:
-+	case SB_CC:
-+		class = PCI_CLASS_MEMORY;
-+		subclass = PCI_MEMORY_FLASH;
-+		break;
-+	case SB_D11:
-+		class = PCI_CLASS_NET;
-+		subclass = PCI_NET_OTHER;
-+		/* Let an nvram variable override this */
-+		sprintf(varname, "wl%did", unit);
-+		if ((core = getintvar(NULL, varname)) == 0) {
-+			if (chip == BCM4712_DEVICE_ID) {
-+				if (chippkg == BCM4712SMALL_PKG_ID)
-+					core = BCM4306_D11G_ID;
-+				else
-+					core = BCM4306_D11DUAL_ID;
-+			}
-+		}
-+		break;
-+
-+	default:
-+		class = subclass = progif = 0xff;
-+		break;
-+	}
-+
-+	*pcivendor = (uint16)vendor;
-+	*pcidevice = (uint16)core;
-+	*pciclass = class;
-+	*pcisubclass = subclass;
-+	*pciprogif = progif;
-+}
-+
-+/* Fix chip's configuration. The current core may be changed upon return */
-+static int
-+sb_pci_fixcfg(sb_info_t *si)
-+{
-+	uint origidx, pciidx;
-+	sbpciregs_t *pciregs;
-+	uint16 val16, *reg16;
-+
-+	ASSERT(BUSTYPE(si->sb.bustype) == PCI_BUS);
-+
-+	/* Fix PCI(e) SROM shadow area */
-+	/* save the current index */
-+	origidx = sb_coreidx(&si->sb);
-+
-+	if (si->sb.buscoretype == SB_PCI) {
-+		pciregs = (sbpciregs_t *)sb_setcore(&si->sb, SB_PCI, 0);
-+		ASSERT(pciregs);
-+		reg16 = &pciregs->sprom[SRSH_PI_OFFSET];
-+	}
-+	else {
-+		ASSERT(0);
-+		return -1;
-+	}
-+	pciidx = sb_coreidx(&si->sb);
-+	val16 = R_REG(reg16);
-+	if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != (uint16)pciidx) {
-+		val16 = (uint16)(pciidx << SRSH_PI_SHIFT) | (val16 & ~SRSH_PI_MASK);
-+		W_REG(reg16, val16);
-+	}
-+
-+	/* restore the original index */
-+	sb_setcoreidx(&si->sb, origidx);
-+
-+	return 0;
-+}
-+
-+EXPORT_SYMBOL(sb_boardtype);
-+EXPORT_SYMBOL(sb_boardvendor);
-+EXPORT_SYMBOL(sb_gpiocontrol);
-+EXPORT_SYMBOL(sb_gpioin);
-+EXPORT_SYMBOL(sb_gpiointmask);
-+EXPORT_SYMBOL(sb_gpiointpolarity);
-+EXPORT_SYMBOL(sb_gpioled);
-+EXPORT_SYMBOL(sb_gpioout);
-+EXPORT_SYMBOL(sb_gpioouten);
-+EXPORT_SYMBOL(sb_gpiorelease);
-+EXPORT_SYMBOL(sb_gpioreserve);
-+EXPORT_SYMBOL(sb_gpiosetcore);
-+EXPORT_SYMBOL(sb_gpiotimerval);
-+EXPORT_SYMBOL(sb_watchdog);
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/broadcom/sflash.c linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/sflash.c
---- linux-2.6.16/arch/mips/bcm947xx/broadcom/sflash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/broadcom/sflash.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,418 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2005, Broadcom Corporation      
-+ * All Rights Reserved.      
-+ *       
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
-+ *
-+ * $Id$
-+ */
-+
-+#include <osl.h>
-+#include <typedefs.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <mipsinc.h>
-+#include <bcmutils.h>
-+#include <bcmdevs.h>
-+#include <sflash.h>
-+
-+/* Private global state */
-+static struct sflash sflash;
-+
-+/* Issue a serial flash command */
-+static INLINE void
-+sflash_cmd(chipcregs_t *cc, uint opcode)
-+{
-+	W_REG(&cc->flashcontrol, SFLASH_START | opcode);
-+	while (R_REG(&cc->flashcontrol) & SFLASH_BUSY);
-+}
-+
-+/* Initialize serial flash access */
-+struct sflash *
-+sflash_init(chipcregs_t *cc)
-+{
-+	uint32 id, id2;
-+
-+	bzero(&sflash, sizeof(sflash));
-+
-+	sflash.type = R_REG(&cc->capabilities) & CAP_FLASH_MASK;
-+
-+	switch (sflash.type) {
-+	case SFLASH_ST:
-+		/* Probe for ST chips */
-+		sflash_cmd(cc, SFLASH_ST_DP);
-+		sflash_cmd(cc, SFLASH_ST_RES);
-+		id = R_REG(&cc->flashdata);
-+		switch (id) {
-+		case 0x11:
-+			/* ST M25P20 2 Mbit Serial Flash */
-+			sflash.blocksize = 64 * 1024;
-+			sflash.numblocks = 4;
-+			break;
-+		case 0x12:
-+			/* ST M25P40 4 Mbit Serial Flash */
-+			sflash.blocksize = 64 * 1024;
-+			sflash.numblocks = 8;
-+			break;
-+		case 0x13:
-+			/* ST M25P80 8 Mbit Serial Flash */
-+			sflash.blocksize = 64 * 1024;
-+			sflash.numblocks = 16;
-+			break;
-+		case 0x14:
-+			/* ST M25P16 16 Mbit Serial Flash */
-+			sflash.blocksize = 64 * 1024;
-+			sflash.numblocks = 32;
-+			break;
-+		case 0x15:
-+			/* ST M25P32 32 Mbit Serial Flash */
-+			sflash.blocksize = 64 * 1024;
-+			sflash.numblocks = 64;
-+			break;
-+		case 0xbf:
-+			W_REG(&cc->flashaddress, 1);
-+			sflash_cmd(cc, SFLASH_ST_RES);
-+			id2 = R_REG(&cc->flashdata);
-+			if (id2 == 0x44) {
-+				/* SST M25VF80 4 Mbit Serial Flash */
-+				sflash.blocksize = 64 * 1024;
-+				sflash.numblocks = 8;
-+			}
-+			break;
-+		}
-+		break;
-+
-+	case SFLASH_AT:
-+		/* Probe for Atmel chips */
-+		sflash_cmd(cc, SFLASH_AT_STATUS);
-+		id = R_REG(&cc->flashdata) & 0x3c;
-+		switch (id) {
-+		case 0xc:
-+			/* Atmel AT45DB011 1Mbit Serial Flash */
-+			sflash.blocksize = 256;
-+			sflash.numblocks = 512;
-+			break;
-+		case 0x14:
-+			/* Atmel AT45DB021 2Mbit Serial Flash */
-+			sflash.blocksize = 256;
-+			sflash.numblocks = 1024;
-+			break;
-+		case 0x1c:
-+			/* Atmel AT45DB041 4Mbit Serial Flash */
-+			sflash.blocksize = 256;
-+			sflash.numblocks = 2048;
-+			break;
-+		case 0x24:
-+			/* Atmel AT45DB081 8Mbit Serial Flash */
-+			sflash.blocksize = 256;
-+			sflash.numblocks = 4096;
-+			break;
-+		case 0x2c:
-+			/* Atmel AT45DB161 16Mbit Serial Flash */
-+			sflash.blocksize = 512;
-+			sflash.numblocks = 4096;
-+			break;
-+		case 0x34:
-+			/* Atmel AT45DB321 32Mbit Serial Flash */
-+			sflash.blocksize = 512;
-+			sflash.numblocks = 8192;
-+			break;
-+		case 0x3c:
-+			/* Atmel AT45DB642 64Mbit Serial Flash */
-+			sflash.blocksize = 1024;
-+			sflash.numblocks = 8192;
-+			break;
-+		}
-+		break;
-+	}
-+
-+	sflash.size = sflash.blocksize * sflash.numblocks;
-+	return sflash.size ? &sflash : NULL;
-+}
-+
-+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
-+int
-+sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf)
-+{
-+	int cnt;
-+	uint32 *from, *to;
-+
-+	if (!len)
-+		return 0;
-+
-+	if ((offset + len) > sflash.size)
-+		return -22;
-+
-+	if ((len >= 4) && (offset & 3))
-+		cnt = 4 - (offset & 3);
-+	else if ((len >= 4) && ((uint32)buf & 3))
-+		cnt = 4 - ((uint32)buf & 3);
-+	else
-+		cnt = len;
-+
-+	from = (uint32 *)KSEG1ADDR(SB_FLASH2 + offset);
-+	to = (uint32 *)buf;
-+
-+	if (cnt < 4) {
-+		bcopy(from, to, cnt);
-+		return cnt;
-+	}
-+
-+	while (cnt >= 4) {
-+		*to++ = *from++;
-+		cnt -= 4;
-+	}
-+
-+	return (len - cnt);
-+}
-+
-+/* Poll for command completion. Returns zero when complete. */
-+int
-+sflash_poll(chipcregs_t *cc, uint offset)
-+{
-+	if (offset >= sflash.size)
-+		return -22;
-+
-+	switch (sflash.type) {
-+	case SFLASH_ST:
-+		/* Check for ST Write In Progress bit */
-+		sflash_cmd(cc, SFLASH_ST_RDSR);
-+		return R_REG(&cc->flashdata) & SFLASH_ST_WIP;
-+	case SFLASH_AT:
-+		/* Check for Atmel Ready bit */
-+		sflash_cmd(cc, SFLASH_AT_STATUS);
-+		return !(R_REG(&cc->flashdata) & SFLASH_AT_READY);
-+	}
-+
-+	return 0;
-+}
-+
-+/* Write len bytes starting at offset into buf. Returns number of bytes
-+ * written. Caller should poll for completion.
-+ */
-+int
-+sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf)
-+{
-+	struct sflash *sfl;
-+	int ret = 0;
-+	bool is4712b0;
-+	uint32 page, byte, mask;
-+
-+	if (!len)
-+		return 0;
-+
-+	if ((offset + len) > sflash.size)
-+		return -22;
-+
-+	sfl = &sflash;
-+	switch (sfl->type) {
-+	case SFLASH_ST:
-+		mask = R_REG(&cc->chipid);
-+		is4712b0 = (((mask & CID_ID_MASK) == BCM4712_DEVICE_ID) &&
-+			    ((mask & CID_REV_MASK) == (3 << CID_REV_SHIFT)));
-+		/* Enable writes */
-+		sflash_cmd(cc, SFLASH_ST_WREN);
-+		if (is4712b0) {
-+			mask = 1 << 14;
-+			W_REG(&cc->flashaddress, offset);
-+			W_REG(&cc->flashdata, *buf++);
-+			/* Set chip select */
-+			OR_REG(&cc->gpioout, mask);
-+			/* Issue a page program with the first byte */
-+			sflash_cmd(cc, SFLASH_ST_PP);
-+			ret = 1;
-+			offset++;
-+			len--;
-+			while (len > 0) {
-+				if ((offset & 255) == 0) {
-+					/* Page boundary, drop cs and return */
-+					AND_REG(&cc->gpioout, ~mask);
-+					if (!sflash_poll(cc, offset)) {
-+						/* Flash rejected command */
-+						return -11;
-+					}
-+					return ret;
-+				} else {
-+					/* Write single byte */
-+					sflash_cmd(cc, *buf++);
-+				}
-+				ret++;
-+				offset++;
-+				len--;
-+			}
-+			/* All done, drop cs if needed */
-+			if ((offset & 255) != 1) {
-+				/* Drop cs */
-+				AND_REG(&cc->gpioout, ~mask);
-+				if (!sflash_poll(cc, offset)) {
-+					/* Flash rejected command */
-+					return -12;
-+				}
-+			}
-+		} else {
-+			ret = 1;
-+			W_REG(&cc->flashaddress, offset);
-+			W_REG(&cc->flashdata, *buf);
-+			/* Page program */
-+			sflash_cmd(cc, SFLASH_ST_PP);
-+		}
-+		break;
-+	case SFLASH_AT:
-+		mask = sfl->blocksize - 1;
-+		page = (offset & ~mask) << 1;
-+		byte = offset & mask;
-+		/* Read main memory page into buffer 1 */
-+		if (byte || len < sfl->blocksize) {
-+			W_REG(&cc->flashaddress, page);
-+			sflash_cmd(cc, SFLASH_AT_BUF1_LOAD);
-+			/* 250 us for AT45DB321B */
-+			SPINWAIT(sflash_poll(cc, offset), 1000);
-+			ASSERT(!sflash_poll(cc, offset));
-+		}
-+		/* Write into buffer 1 */
-+		for (ret = 0; ret < len && byte < sfl->blocksize; ret++) {
-+			W_REG(&cc->flashaddress, byte++);
-+			W_REG(&cc->flashdata, *buf++);
-+			sflash_cmd(cc, SFLASH_AT_BUF1_WRITE);
-+		}
-+		/* Write buffer 1 into main memory page */
-+		W_REG(&cc->flashaddress, page);
-+		sflash_cmd(cc, SFLASH_AT_BUF1_PROGRAM);
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+/* Erase a region. Returns number of bytes scheduled for erasure.
-+ * Caller should poll for completion.
-+ */
-+int
-+sflash_erase(chipcregs_t *cc, uint offset)
-+{
-+	struct sflash *sfl;
-+
-+	if (offset >= sflash.size)
-+		return -22;
-+
-+	sfl = &sflash;
-+	switch (sfl->type) {
-+	case SFLASH_ST:
-+		sflash_cmd(cc, SFLASH_ST_WREN);
-+		W_REG(&cc->flashaddress, offset);
-+		sflash_cmd(cc, SFLASH_ST_SE);
-+		return sfl->blocksize;
-+	case SFLASH_AT:
-+		W_REG(&cc->flashaddress, offset << 1);
-+		sflash_cmd(cc, SFLASH_AT_PAGE_ERASE);
-+		return sfl->blocksize;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * writes the appropriate range of flash, a NULL buf simply erases
-+ * the region of flash
-+ */
-+int
-+sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf)
-+{
-+	struct sflash *sfl;
-+	uchar *block = NULL, *cur_ptr, *blk_ptr;
-+	uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
-+	uint blk_offset, blk_len, copied;
-+	int bytes, ret = 0;
-+
-+	/* Check address range */
-+	if (len <= 0)
-+		return 0;
-+
-+	sfl = &sflash;
-+	if ((offset + len) > sfl->size)
-+		return -1;
-+
-+	blocksize = sfl->blocksize;
-+	mask = blocksize - 1;
-+
-+	/* Allocate a block of mem */
-+	if (!(block = MALLOC(NULL, blocksize)))
-+		return -1;
-+
-+	while (len) {
-+		/* Align offset */
-+		cur_offset = offset & ~mask;
-+		cur_length = blocksize;
-+		cur_ptr = block;
-+
-+		remainder = blocksize - (offset & mask);
-+		if (len < remainder)
-+			cur_retlen = len;
-+		else
-+			cur_retlen = remainder;
-+
-+		/* buf == NULL means erase only */
-+		if (buf) {
-+			/* Copy existing data into holding block if necessary */
-+			if ((offset & mask)  || (len < blocksize)) {
-+				blk_offset = cur_offset;
-+				blk_len = cur_length;
-+				blk_ptr = cur_ptr;
-+
-+				/* Copy entire block */
-+				while(blk_len) {
-+					copied = sflash_read(cc, blk_offset, blk_len, blk_ptr); 
-+					blk_offset += copied;
-+					blk_len -= copied;
-+					blk_ptr += copied;
-+				}
-+			}
-+
-+			/* Copy input data into holding block */
-+			memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
-+		}
-+
-+		/* Erase block */
-+		if ((ret = sflash_erase(cc, (uint) cur_offset)) < 0)
-+			goto done;
-+		while (sflash_poll(cc, (uint) cur_offset));
-+
-+		/* buf == NULL means erase only */
-+		if (!buf) {
-+			offset += cur_retlen;
-+			len -= cur_retlen;
-+			continue;
-+		}
-+
-+		/* Write holding block */
-+		while (cur_length > 0) {
-+			if ((bytes = sflash_write(cc,
-+						  (uint) cur_offset,
-+						  (uint) cur_length,
-+						  (uchar *) cur_ptr)) < 0) {
-+				ret = bytes;
-+				goto done;
-+			}
-+			while (sflash_poll(cc, (uint) cur_offset));
-+			cur_offset += bytes;
-+			cur_length -= bytes;
-+			cur_ptr += bytes;
-+		}
-+
-+		offset += cur_retlen;
-+		len -= cur_retlen;
-+		buf += cur_retlen;
-+	}
-+
-+	ret = len;
-+done:
-+	if (block)
-+		MFREE(NULL, block, blocksize);
-+	return ret;
-+}
-+
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/bcmdevs.h
---- linux-2.6.16/arch/mips/bcm947xx/include/bcmdevs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/bcmdevs.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,391 @@
-+/*
-+ * Broadcom device-specific manifest constants.
-+ *
-+ * Copyright 2005, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id$
-+ */
-+
-+#ifndef	_BCMDEVS_H
-+#define	_BCMDEVS_H
-+
-+
-+/* Known PCI vendor Id's */
-+#define	VENDOR_EPIGRAM		0xfeda
-+#define	VENDOR_BROADCOM		0x14e4
-+#define	VENDOR_3COM		0x10b7
-+#define	VENDOR_NETGEAR		0x1385
-+#define	VENDOR_DIAMOND		0x1092
-+#define	VENDOR_DELL		0x1028
-+#define	VENDOR_HP		0x0e11
-+#define	VENDOR_APPLE		0x106b
-+
-+/* PCI Device Id's */
-+#define	BCM4210_DEVICE_ID	0x1072		/* never used */
-+#define	BCM4211_DEVICE_ID	0x4211
-+#define	BCM4230_DEVICE_ID	0x1086		/* never used */
-+#define	BCM4231_DEVICE_ID	0x4231
-+
-+#define	BCM4410_DEVICE_ID	0x4410		/* bcm44xx family pci iline */
-+#define	BCM4430_DEVICE_ID	0x4430		/* bcm44xx family cardbus iline */
-+#define	BCM4412_DEVICE_ID	0x4412		/* bcm44xx family pci enet */
-+#define	BCM4432_DEVICE_ID	0x4432		/* bcm44xx family cardbus enet */
-+
-+#define	BCM3352_DEVICE_ID	0x3352		/* bcm3352 device id */
-+#define	BCM3360_DEVICE_ID	0x3360		/* bcm3360 device id */
-+
-+#define	EPI41210_DEVICE_ID	0xa0fa		/* bcm4210 */
-+#define	EPI41230_DEVICE_ID	0xa10e		/* bcm4230 */
-+
-+#define	BCM47XX_ILINE_ID	0x4711		/* 47xx iline20 */
-+#define	BCM47XX_V90_ID		0x4712		/* 47xx v90 codec */
-+#define	BCM47XX_ENET_ID		0x4713		/* 47xx enet */
-+#define	BCM47XX_EXT_ID		0x4714		/* 47xx external i/f */
-+#define	BCM47XX_USB_ID		0x4715		/* 47xx usb */
-+#define	BCM47XX_USBH_ID		0x4716		/* 47xx usb host */
-+#define	BCM47XX_USBD_ID		0x4717		/* 47xx usb device */
-+#define	BCM47XX_IPSEC_ID	0x4718		/* 47xx ipsec */
-+#define	BCM47XX_ROBO_ID		0x4719		/* 47xx/53xx roboswitch core */
-+#define	BCM47XX_USB20H_ID	0x471a		/* 47xx usb 2.0 host */
-+#define	BCM47XX_USB20D_ID	0x471b		/* 47xx usb 2.0 device */
-+
-+#define	BCM4710_DEVICE_ID	0x4710		/* 4710 primary function 0 */
-+
-+#define	BCM4610_DEVICE_ID	0x4610		/* 4610 primary function 0 */
-+#define	BCM4610_ILINE_ID	0x4611		/* 4610 iline100 */
-+#define	BCM4610_V90_ID		0x4612		/* 4610 v90 codec */
-+#define	BCM4610_ENET_ID		0x4613		/* 4610 enet */
-+#define	BCM4610_EXT_ID		0x4614		/* 4610 external i/f */
-+#define	BCM4610_USB_ID		0x4615		/* 4610 usb */
-+
-+#define	BCM4402_DEVICE_ID	0x4402		/* 4402 primary function 0 */
-+#define	BCM4402_ENET_ID		0x4402		/* 4402 enet */
-+#define	BCM4402_V90_ID		0x4403		/* 4402 v90 codec */
-+#define	BCM4401_ENET_ID		0x170c		/* 4401b0 production enet cards */
-+
-+#define	BCM4301_DEVICE_ID	0x4301		/* 4301 primary function 0 */
-+#define	BCM4301_D11B_ID		0x4301		/* 4301 802.11b */
-+
-+#define	BCM4307_DEVICE_ID	0x4307		/* 4307 primary function 0 */
-+#define	BCM4307_V90_ID		0x4305		/* 4307 v90 codec */
-+#define	BCM4307_ENET_ID		0x4306		/* 4307 enet */
-+#define	BCM4307_D11B_ID		0x4307		/* 4307 802.11b */
-+
-+#define	BCM4306_DEVICE_ID	0x4306		/* 4306 chipcommon chipid */
-+#define	BCM4306_D11G_ID		0x4320		/* 4306 802.11g */
-+#define	BCM4306_D11G_ID2	0x4325		
-+#define	BCM4306_D11A_ID		0x4321		/* 4306 802.11a */
-+#define	BCM4306_UART_ID		0x4322		/* 4306 uart */
-+#define	BCM4306_V90_ID		0x4323		/* 4306 v90 codec */
-+#define	BCM4306_D11DUAL_ID	0x4324		/* 4306 dual A+B */
-+
-+#define	BCM4309_PKG_ID		1		/* 4309 package id */
-+
-+#define	BCM4303_D11B_ID		0x4303		/* 4303 802.11b */
-+#define	BCM4303_PKG_ID		2		/* 4303 package id */
-+
-+#define	BCM4310_DEVICE_ID	0x4310		/* 4310 chipcommon chipid */
-+#define	BCM4310_D11B_ID		0x4311		/* 4310 802.11b */
-+#define	BCM4310_UART_ID		0x4312		/* 4310 uart */
-+#define	BCM4310_ENET_ID		0x4313		/* 4310 enet */
-+#define	BCM4310_USB_ID		0x4315		/* 4310 usb */
-+
-+#define	BCMGPRS_UART_ID		0x4333		/* Uart id used by 4306/gprs card */
-+#define	BCMGPRS2_UART_ID	0x4344		/* Uart id used by 4306/gprs card */
-+
-+
-+#define	BCM4704_DEVICE_ID	0x4704		/* 4704 chipcommon chipid */
-+#define	BCM4704_ENET_ID		0x4706		/* 4704 enet (Use 47XX_ENET_ID instead!) */
-+
-+#define	BCM4317_DEVICE_ID	0x4317		/* 4317 chip common chipid */
-+
-+#define	BCM4318_DEVICE_ID	0x4318		/* 4318 chip common chipid */
-+#define	BCM4318_D11G_ID		0x4318		/* 4318 801.11b/g id */
-+#define	BCM4318_D11DUAL_ID	0x4319		/* 4318 801.11a/b/g id */
-+#define BCM4318_JTAGM_ID	0x4331		/* 4318 jtagm device id */
-+
-+#define FPGA_JTAGM_ID		0x4330		/* ??? */
-+
-+/* Address map */
-+#define BCM4710_SDRAM           0x00000000      /* Physical SDRAM */
-+#define BCM4710_PCI_MEM         0x08000000      /* Host Mode PCI memory access space (64 MB) */
-+#define BCM4710_PCI_CFG         0x0c000000      /* Host Mode PCI configuration space (64 MB) */
-+#define BCM4710_PCI_DMA         0x40000000      /* Client Mode PCI memory access space (1 GB) */
-+#define BCM4710_SDRAM_SWAPPED   0x10000000      /* Byteswapped Physical SDRAM */
-+#define BCM4710_ENUM            0x18000000      /* Beginning of core enumeration space */
-+
-+/* Core register space */
-+#define BCM4710_REG_SDRAM       0x18000000      /* SDRAM core registers */
-+#define BCM4710_REG_ILINE20     0x18001000      /* InsideLine20 core registers */
-+#define BCM4710_REG_EMAC0       0x18002000      /* Ethernet MAC 0 core registers */
-+#define BCM4710_REG_CODEC       0x18003000      /* Codec core registers */
-+#define BCM4710_REG_USB         0x18004000      /* USB core registers */
-+#define BCM4710_REG_PCI         0x18005000      /* PCI core registers */
-+#define BCM4710_REG_MIPS        0x18006000      /* MIPS core registers */
-+#define BCM4710_REG_EXTIF       0x18007000      /* External Interface core registers */
-+#define BCM4710_REG_EMAC1       0x18008000      /* Ethernet MAC 1 core registers */
-+
-+#define BCM4710_EXTIF           0x1f000000      /* External Interface base address */
-+#define BCM4710_PCMCIA_MEM      0x1f000000      /* External Interface PCMCIA memory access */
-+#define BCM4710_PCMCIA_IO       0x1f100000      /* PCMCIA I/O access */
-+#define BCM4710_PCMCIA_CONF     0x1f200000      /* PCMCIA configuration */
-+#define BCM4710_PROG            0x1f800000      /* Programable interface */
-+#define BCM4710_FLASH           0x1fc00000      /* Flash */
-+
-+#define BCM4710_EJTAG           0xff200000      /* MIPS EJTAG space (2M) */
-+
-+#define BCM4710_UART            (BCM4710_REG_EXTIF + 0x00000300)
-+
-+#define BCM4710_EUART           (BCM4710_EXTIF + 0x00800000)
-+#define BCM4710_LED             (BCM4710_EXTIF + 0x00900000)
-+
-+#define	BCM4712_DEVICE_ID	0x4712		/* 4712 chipcommon chipid */
-+#define	BCM4712_MIPS_ID		0x4720		/* 4712 base devid */
-+#define	BCM4712LARGE_PKG_ID	0		/* 340pin 4712 package id */
-+#define	BCM4712SMALL_PKG_ID	1		/* 200pin 4712 package id */
-+#define	BCM4712MID_PKG_ID	2		/* 225pin 4712 package id */
-+
-+#define	SDIOH_FPGA_ID		0x4380		/* sdio host fpga */
-+
-+#define BCM5365_DEVICE_ID       0x5365          /* 5365 chipcommon chipid */
-+#define	BCM5350_DEVICE_ID	0x5350		/* bcm5350 chipcommon chipid */
-+#define	BCM5352_DEVICE_ID	0x5352		/* bcm5352 chipcommon chipid */
-+
-+#define	BCM4320_DEVICE_ID	0x4320		/* bcm4320 chipcommon chipid */
-+
-+/* PCMCIA vendor Id's */
-+
-+#define	VENDOR_BROADCOM_PCMCIA	0x02d0
-+
-+/* SDIO vendor Id's */
-+#define	VENDOR_BROADCOM_SDIO	0x00BF
-+
-+
-+/* boardflags */
-+#define	BFL_BTCOEXIST		0x0001	/* This board implements Bluetooth coexistance */
-+#define	BFL_PACTRL		0x0002	/* This board has gpio 9 controlling the PA */
-+#define	BFL_AIRLINEMODE		0x0004	/* This board implements gpio13 radio disable indication */
-+#define	BFL_ENETROBO		0x0010	/* This board has robo switch or core */
-+#define	BFL_CCKHIPWR		0x0040	/* Can do high-power CCK transmission */
-+#define	BFL_ENETADM		0x0080	/* This board has ADMtek switch */
-+#define	BFL_ENETVLAN		0x0100	/* This board has vlan capability */
-+#define	BFL_AFTERBURNER		0x0200	/* This board supports Afterburner mode */
-+#define BFL_NOPCI		0x0400	/* This board leaves PCI floating */
-+#define BFL_FEM			0x0800  /* This board supports the Front End Module */
-+#define BFL_EXTLNA		0x1000	/* This board has an external LNA */
-+#define BFL_HGPA		0x2000	/* This board has a high gain PA */
-+#define	BFL_BTCMOD		0x4000	/* This board' BTCOEXIST is in the alternate gpios */
-+#define	BFL_ALTIQ		0x8000	/* Alternate I/Q settings */
-+
-+/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
-+#define BOARD_GPIO_HWRAD_B	0x010	/* bit 4 is HWRAD input on 4301 */
-+#define	BOARD_GPIO_BTCMOD_IN	0x010	/* bit 4 is the alternate BT Coexistance Input */
-+#define	BOARD_GPIO_BTCMOD_OUT	0x020	/* bit 5 is the alternate BT Coexistance Out */
-+#define	BOARD_GPIO_BTC_IN	0x080	/* bit 7 is BT Coexistance Input */
-+#define	BOARD_GPIO_BTC_OUT	0x100	/* bit 8 is BT Coexistance Out */
-+#define	BOARD_GPIO_PACTRL	0x200	/* bit 9 controls the PA on new 4306 boards */
-+#define	PCI_CFG_GPIO_SCS	0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
-+#define PCI_CFG_GPIO_HWRAD	0x20	/* PCI config space GPIO 13 for hw radio disable */
-+#define PCI_CFG_GPIO_XTAL	0x40	/* PCI config space GPIO 14 for Xtal powerup */
-+#define PCI_CFG_GPIO_PLL	0x80	/* PCI config space GPIO 15 for PLL powerdown */
-+
-+/* Bus types */
-+#define	SB_BUS			0	/* Silicon Backplane */
-+#define	PCI_BUS			1	/* PCI target */
-+#define	PCMCIA_BUS		2	/* PCMCIA target */
-+#define SDIO_BUS		3	/* SDIO target */
-+#define JTAG_BUS		4	/* JTAG */
-+
-+/* Allows optimization for single-bus support */
-+#ifdef BCMBUSTYPE
-+#define BUSTYPE(bus) (BCMBUSTYPE)
-+#else
-+#define BUSTYPE(bus) (bus)
-+#endif
-+
-+/* power control defines */
-+#define PLL_DELAY		150		/* us pll on delay */
-+#define FREF_DELAY		200		/* us fref change delay */
-+#define MIN_SLOW_CLK		32		/* us Slow clock period */
-+#define	XTAL_ON_DELAY		1000		/* us crystal power-on delay */
-+
-+/* Reference Board Types */
-+
-+#define	BU4710_BOARD		0x0400
-+#define	VSIM4710_BOARD		0x0401
-+#define	QT4710_BOARD		0x0402
-+
-+#define	BU4610_BOARD		0x0403
-+#define	VSIM4610_BOARD		0x0404
-+
-+#define	BU4307_BOARD		0x0405
-+#define	BCM94301CB_BOARD	0x0406
-+#define	BCM94301PC_BOARD	0x0406		/* Pcmcia 5v card */
-+#define	BCM94301MP_BOARD	0x0407
-+#define	BCM94307MP_BOARD	0x0408
-+#define	BCMAP4307_BOARD		0x0409
-+
-+#define	BU4309_BOARD		0x040a
-+#define	BCM94309CB_BOARD	0x040b
-+#define	BCM94309MP_BOARD	0x040c
-+#define	BCM4309AP_BOARD		0x040d
-+
-+#define	BCM94302MP_BOARD	0x040e
-+
-+#define	VSIM4310_BOARD		0x040f
-+#define	BU4711_BOARD		0x0410
-+#define	BCM94310U_BOARD		0x0411
-+#define	BCM94310AP_BOARD	0x0412
-+#define	BCM94310MP_BOARD	0x0414
-+
-+#define	BU4306_BOARD		0x0416
-+#define	BCM94306CB_BOARD	0x0417
-+#define	BCM94306MP_BOARD	0x0418
-+
-+#define	BCM94710D_BOARD		0x041a
-+#define	BCM94710R1_BOARD	0x041b
-+#define	BCM94710R4_BOARD	0x041c
-+#define	BCM94710AP_BOARD	0x041d
-+
-+
-+#define	BU2050_BOARD		0x041f
-+
-+
-+#define	BCM94309G_BOARD		0x0421
-+
-+#define	BCM94301PC3_BOARD	0x0422		/* Pcmcia 3.3v card */
-+
-+#define	BU4704_BOARD		0x0423
-+#define	BU4702_BOARD		0x0424
-+
-+#define	BCM94306PC_BOARD	0x0425		/* pcmcia 3.3v 4306 card */
-+
-+#define	BU4317_BOARD		0x0426
-+
-+
-+#define	BCM94702MN_BOARD	0x0428
-+
-+/* BCM4702 1U CompactPCI Board */
-+#define	BCM94702CPCI_BOARD	0x0429
-+
-+/* BCM4702 with BCM95380 VLAN Router */
-+#define	BCM95380RR_BOARD	0x042a
-+
-+/* cb4306 with SiGe PA */
-+#define	BCM94306CBSG_BOARD	0x042b
-+
-+/* mp4301 with 2050 radio */
-+#define	BCM94301MPL_BOARD	0x042c
-+
-+/* cb4306 with SiGe PA */
-+#define	PCSG94306_BOARD		0x042d
-+
-+/* bu4704 with sdram */
-+#define	BU4704SD_BOARD		0x042e
-+
-+/* Dual 11a/11g Router */
-+#define	BCM94704AGR_BOARD	0x042f
-+
-+/* 11a-only minipci */
-+#define	BCM94308MP_BOARD	0x0430
-+
-+
-+
-+/* BCM94317 boards */
-+#define BCM94317CB_BOARD	0x0440
-+#define BCM94317MP_BOARD	0x0441
-+#define BCM94317PCMCIA_BOARD	0x0442
-+#define BCM94317SDIO_BOARD	0x0443
-+
-+#define BU4712_BOARD		0x0444
-+#define	BU4712SD_BOARD		0x045d
-+#define	BU4712L_BOARD		0x045f
-+
-+/* BCM4712 boards */
-+#define BCM94712AP_BOARD	0x0445
-+#define BCM94712P_BOARD		0x0446
-+
-+/* BCM4318 boards */
-+#define BU4318_BOARD		0x0447
-+#define CB4318_BOARD		0x0448
-+#define MPG4318_BOARD		0x0449
-+#define MP4318_BOARD		0x044a
-+#define SD4318_BOARD		0x044b
-+
-+/* BCM63XX boards */
-+#define BCM96338_BOARD		0x6338
-+#define BCM96345_BOARD		0x6345
-+#define BCM96348_BOARD		0x6348
-+
-+/* Another mp4306 with SiGe */
-+#define	BCM94306P_BOARD		0x044c
-+
-+/* CF-like 4317 modules */
-+#define	BCM94317CF_BOARD	0x044d
-+
-+/* mp4303 */
-+#define	BCM94303MP_BOARD	0x044e
-+
-+/* mpsgh4306 */
-+#define	BCM94306MPSGH_BOARD	0x044f
-+
-+/* BRCM 4306 w/ Front End Modules */
-+#define BCM94306MPM  		0x0450
-+#define BCM94306MPL  		0x0453
-+
-+/* 4712agr */
-+#define	BCM94712AGR_BOARD	0x0451
-+
-+/* The real CF 4317 board */
-+#define	CFI4317_BOARD		0x0452
-+
-+/* pcmcia 4303 */
-+#define	PC4303_BOARD		0x0454
-+
-+/* 5350K */
-+#define	BCM95350K_BOARD		0x0455
-+
-+/* 5350R */
-+#define	BCM95350R_BOARD		0x0456
-+
-+/* 4306mplna */
-+#define	BCM94306MPLNA_BOARD	0x0457
-+
-+/* 4320 boards */
-+#define	BU4320_BOARD		0x0458
-+#define	BU4320S_BOARD		0x0459
-+#define	BCM94320PH_BOARD	0x045a
-+
-+/* 4306mph */
-+#define	BCM94306MPH_BOARD	0x045b
-+
-+/* 4306pciv */
-+#define	BCM94306PCIV_BOARD	0x045c
-+
-+#define	BU4712SD_BOARD		0x045d
-+
-+#define	BCM94320PFLSH_BOARD	0x045e
-+
-+#define	BU4712L_BOARD		0x045f
-+#define	BCM94712LGR_BOARD	0x0460
-+#define	BCM94320R_BOARD		0x0461
-+
-+#define	BU5352_BOARD		0x0462
-+
-+#define	BCM94318MPGH_BOARD	0x0463
-+
-+
-+#define	BCM95352GR_BOARD	0x0467
-+
-+/* bcm95351agr */
-+#define	BCM95351AGR_BOARD	0x0470
-+
-+/* # of GPIO pins */
-+#define GPIO_NUMPINS		16
-+
-+#endif /* _BCMDEVS_H */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/bcmendian.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/bcmendian.h
---- linux-2.6.16/arch/mips/bcm947xx/include/bcmendian.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/bcmendian.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,152 @@
-+/*
-+ * local version of endian.h - byte order defines
-+ *
-+ * Copyright 2005, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ *
-+ *  $Id$
-+*/
-+
-+#ifndef _BCMENDIAN_H_
-+#define _BCMENDIAN_H_
-+
-+#include <typedefs.h>
-+
-+/* Byte swap a 16 bit value */
-+#define BCMSWAP16(val) \
-+	((uint16)( \
-+		(((uint16)(val) & (uint16)0x00ffU) << 8) | \
-+		(((uint16)(val) & (uint16)0xff00U) >> 8) ))
-+	
-+/* Byte swap a 32 bit value */
-+#define BCMSWAP32(val) \
-+	((uint32)( \
-+		(((uint32)(val) & (uint32)0x000000ffUL) << 24) | \
-+		(((uint32)(val) & (uint32)0x0000ff00UL) <<  8) | \
-+		(((uint32)(val) & (uint32)0x00ff0000UL) >>  8) | \
-+		(((uint32)(val) & (uint32)0xff000000UL) >> 24) ))
-+		
-+/* 2 Byte swap a 32 bit value */
-+#define BCMSWAP32BY16(val) \
-+	((uint32)( \
-+		(((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \
-+		(((uint32)(val) & (uint32)0xffff0000UL) >> 16) ))
-+		
-+
-+static INLINE uint16
-+bcmswap16(uint16 val)
-+{
-+	return BCMSWAP16(val);
-+}
-+
-+static INLINE uint32
-+bcmswap32(uint32 val)
-+{
-+	return BCMSWAP32(val);
-+}
-+
-+static INLINE uint32
-+bcmswap32by16(uint32 val)
-+{
-+	return BCMSWAP32BY16(val);
-+}
-+
-+/* buf	- start of buffer of shorts to swap */
-+/* len  - byte length of buffer */
-+static INLINE void
-+bcmswap16_buf(uint16 *buf, uint len)
-+{
-+	len = len/2;
-+
-+	while(len--){
-+		*buf = bcmswap16(*buf);
-+		buf++;
-+	}
-+}
-+
-+#ifndef hton16
-+#ifndef IL_BIGENDIAN
-+#define HTON16(i) BCMSWAP16(i)
-+#define	hton16(i) bcmswap16(i)
-+#define	hton32(i) bcmswap32(i)
-+#define	ntoh16(i) bcmswap16(i)
-+#define	ntoh32(i) bcmswap32(i)
-+#define ltoh16(i) (i)
-+#define ltoh32(i) (i)
-+#define htol16(i) (i)
-+#define htol32(i) (i)
-+#else
-+#define HTON16(i) (i)
-+#define	hton16(i) (i)
-+#define	hton32(i) (i)
-+#define	ntoh16(i) (i)
-+#define	ntoh32(i) (i)
-+#define	ltoh16(i) bcmswap16(i)
-+#define	ltoh32(i) bcmswap32(i)
-+#define htol16(i) bcmswap16(i)
-+#define htol32(i) bcmswap32(i)
-+#endif
-+#endif
-+
-+#ifndef IL_BIGENDIAN
-+#define ltoh16_buf(buf, i)
-+#define htol16_buf(buf, i)
-+#else
-+#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
-+#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
-+#endif
-+
-+/*
-+* load 16-bit value from unaligned little endian byte array.
-+*/
-+static INLINE uint16
-+ltoh16_ua(uint8 *bytes)
-+{
-+	return (bytes[1]<<8)+bytes[0];
-+}
-+
-+/*
-+* load 32-bit value from unaligned little endian byte array.
-+*/
-+static INLINE uint32
-+ltoh32_ua(uint8 *bytes)
-+{
-+	return (bytes[3]<<24)+(bytes[2]<<16)+(bytes[1]<<8)+bytes[0];
-+}
-+
-+/*
-+* load 16-bit value from unaligned big(network) endian byte array.
-+*/
-+static INLINE uint16
-+ntoh16_ua(uint8 *bytes)
-+{
-+	return (bytes[0]<<8)+bytes[1];
-+}
-+
-+/*
-+* load 32-bit value from unaligned big(network) endian byte array.
-+*/
-+static INLINE uint32
-+ntoh32_ua(uint8 *bytes)
-+{
-+	return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3];
-+}
-+
-+#define ltoh_ua(ptr) ( \
-+	sizeof(*(ptr)) == sizeof(uint8) ?  *(uint8 *)ptr : \
-+	sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \
-+	(((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \
-+)
-+
-+#define ntoh_ua(ptr) ( \
-+	sizeof(*(ptr)) == sizeof(uint8) ?  *(uint8 *)ptr : \
-+	sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \
-+	(((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \
-+)
-+
-+#endif /* _BCMENDIAN_H_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/bcmnvram.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/bcmnvram.h
---- linux-2.6.16/arch/mips/bcm947xx/include/bcmnvram.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/bcmnvram.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,95 @@
-+/*
-+ * NVRAM variable manipulation
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _bcmnvram_h_
-+#define _bcmnvram_h_
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+#include <typedefs.h>
-+
-+struct nvram_header {
-+	uint32 magic;
-+	uint32 len;
-+	uint32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
-+	uint32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
-+	uint32 config_ncdl;	/* ncdl values for memc */
-+};
-+
-+struct nvram_tuple {
-+	char *name;
-+	char *value;
-+	struct nvram_tuple *next;
-+};
-+
-+/*
-+ * Get the value of an NVRAM variable. The pointer returned may be
-+ * invalid after a set.
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NULL if undefined
-+ */
-+extern char * __init early_nvram_get(const char *name);
-+
-+/*
-+ * Get the value of an NVRAM variable. The pointer returned may be
-+ * invalid after a set.
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NULL if undefined
-+ */
-+extern char *nvram_get(const char *name);
-+
-+/* 
-+ * Get the value of an NVRAM variable.
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NUL if undefined
-+ */
-+#define nvram_safe_get(name) (BCMINIT(early_nvram_get)(name) ? : "")
-+
-+/*
-+ * Match an NVRAM variable.
-+ * @param	name	name of variable to match
-+ * @param	match	value to compare against value of variable
-+ * @return	TRUE if variable is defined and its value is string equal
-+ *		to match or FALSE otherwise
-+ */
-+static inline int
-+nvram_match(char *name, char *match) {
-+	const char *value = BCMINIT(early_nvram_get)(name);
-+	return (value && !strcmp(value, match));
-+}
-+
-+/*
-+ * Inversely match an NVRAM variable.
-+ * @param	name	name of variable to match
-+ * @param	match	value to compare against value of variable
-+ * @return	TRUE if variable is defined and its value is not string
-+ *		equal to invmatch or FALSE otherwise
-+ */
-+static inline int
-+nvram_invmatch(char *name, char *invmatch) {
-+	const char *value = BCMINIT(early_nvram_get)(name);
-+	return (value && strcmp(value, invmatch));
-+}
-+
-+#endif /* _LANGUAGE_ASSEMBLY */
-+
-+#define NVRAM_MAGIC		0x48534C46	/* 'FLSH' */
-+#define NVRAM_VERSION		1
-+#define NVRAM_HEADER_SIZE	20
-+#define NVRAM_SPACE		0x8000
-+
-+#define NVRAM_MAX_VALUE_LEN 255
-+#define NVRAM_MAX_PARAM_LEN 64
-+
-+#endif /* _bcmnvram_h_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/bcmsrom.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/bcmsrom.h
---- linux-2.6.16/arch/mips/bcm947xx/include/bcmsrom.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/bcmsrom.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,23 @@
-+/*
-+ * Misc useful routines to access NIC local SROM/OTP .
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef	_bcmsrom_h_
-+#define	_bcmsrom_h_
-+
-+extern int srom_var_init(void *sbh, uint bus, void *curmap, osl_t *osh, char **vars, int *count);
-+
-+extern int srom_read(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf);
-+extern int srom_write(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf);
-+
-+#endif	/* _bcmsrom_h_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/bcmutils.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/bcmutils.h
---- linux-2.6.16/arch/mips/bcm947xx/include/bcmutils.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/bcmutils.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,308 @@
-+/*
-+ * Misc useful os-independent macros and functions.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id$
-+ */
-+
-+#ifndef	_bcmutils_h_
-+#define	_bcmutils_h_
-+
-+/*** driver-only section ***/
-+#include <osl.h>
-+
-+#define _BCM_U	0x01	/* upper */
-+#define _BCM_L	0x02	/* lower */
-+#define _BCM_D	0x04	/* digit */
-+#define _BCM_C	0x08	/* cntrl */
-+#define _BCM_P	0x10	/* punct */
-+#define _BCM_S	0x20	/* white space (space/lf/tab) */
-+#define _BCM_X	0x40	/* hex digit */
-+#define _BCM_SP	0x80	/* hard space (0x20) */
-+
-+#define GPIO_PIN_NOTDEFINED 	0x20 
-+
-+extern unsigned char bcm_ctype[];
-+#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
-+
-+#define bcm_isalnum(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
-+#define bcm_isalpha(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
-+#define bcm_iscntrl(c)	((bcm_ismask(c)&(_BCM_C)) != 0)
-+#define bcm_isdigit(c)	((bcm_ismask(c)&(_BCM_D)) != 0)
-+#define bcm_isgraph(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
-+#define bcm_islower(c)	((bcm_ismask(c)&(_BCM_L)) != 0)
-+#define bcm_isprint(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
-+#define bcm_ispunct(c)	((bcm_ismask(c)&(_BCM_P)) != 0)
-+#define bcm_isspace(c)	((bcm_ismask(c)&(_BCM_S)) != 0)
-+#define bcm_isupper(c)	((bcm_ismask(c)&(_BCM_U)) != 0)
-+#define bcm_isxdigit(c)	((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
-+
-+/*
-+ * Spin at most 'us' microseconds while 'exp' is true.
-+ * Caller should explicitly test 'exp' when this completes
-+ * and take appropriate error action if 'exp' is still true.
-+ */
-+#define SPINWAIT(exp, us) { \
-+	uint countdown = (us) + 9; \
-+	while ((exp) && (countdown >= 10)) {\
-+		OSL_DELAY(10); \
-+		countdown -= 10; \
-+	} \
-+}
-+
-+/* generic osl packet queue */
-+struct pktq {
-+	void *head;	/* first packet to dequeue */
-+	void *tail;	/* last packet to dequeue */
-+	uint len;	/* number of queued packets */
-+	uint maxlen;	/* maximum number of queued packets */
-+	bool priority;	/* enqueue by packet priority */
-+	uint8 prio_map[MAXPRIO+1]; /* user priority to packet enqueue policy map */
-+};
-+#define DEFAULT_QLEN	128
-+
-+#define	pktq_len(q)	((q)->len)
-+#define	pktq_avail(q)	((q)->maxlen - (q)->len)
-+#define	pktq_head(q)	((q)->head)
-+#define	pktq_full(q)	((q)->len >= (q)->maxlen)
-+#define	_pktq_pri(q, pri)	((q)->prio_map[pri])
-+#define	pktq_tailpri(q)	((q)->tail ? _pktq_pri(q, PKTPRIO((q)->tail)) : _pktq_pri(q, 0))
-+
-+/* externs */
-+/* packet */
-+extern uint pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf);
-+extern uint pkttotlen(osl_t *osh, void *);
-+extern void pktq_init(struct pktq *q, uint maxlen, const uint8 prio_map[]);
-+extern void pktenq(struct pktq *q, void *p, bool lifo);
-+extern void *pktdeq(struct pktq *q);
-+extern void *pktdeqtail(struct pktq *q);
-+/* string */
-+extern uint bcm_atoi(char *s);
-+extern uchar bcm_toupper(uchar c);
-+extern ulong bcm_strtoul(char *cp, char **endp, uint base);
-+extern char *bcmstrstr(char *haystack, char *needle);
-+extern char *bcmstrcat(char *dest, const char *src);
-+extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen);
-+/* ethernet address */
-+extern char *bcm_ether_ntoa(char *ea, char *buf);
-+extern int bcm_ether_atoe(char *p, char *ea);
-+/* delay */
-+extern void bcm_mdelay(uint ms);
-+/* variable access */
-+extern char *getvar(char *vars, char *name);
-+extern int getintvar(char *vars, char *name);
-+extern uint getgpiopin(char *vars, char *pin_name, uint def_pin);
-+#define	bcmlog(fmt, a1, a2)
-+#define	bcmdumplog(buf, size)	*buf = '\0'
-+#define	bcmdumplogent(buf, idx)	-1
-+
-+/*** driver/apps-shared section ***/
-+
-+#define BCME_STRLEN 		64
-+#define VALID_BCMERROR(e)  ((e <= 0) && (e >= BCME_LAST))
-+
-+
-+/* 
-+ * error codes could be added but the defined ones shouldn't be changed/deleted 
-+ * these error codes are exposed to the user code 
-+ * when ever a new error code is added to this list 
-+ * please update errorstring table with the related error string and 
-+ * update osl files with os specific errorcode map   
-+*/
-+
-+#define BCME_ERROR			-1	/* Error generic */
-+#define BCME_BADARG			-2	/* Bad Argument */
-+#define BCME_BADOPTION			-3	/* Bad option */
-+#define BCME_NOTUP			-4	/* Not up */
-+#define BCME_NOTDOWN			-5	/* Not down */
-+#define BCME_NOTAP			-6	/* Not AP */
-+#define BCME_NOTSTA			-7	/* Not STA  */
-+#define BCME_BADKEYIDX			-8	/* BAD Key Index */
-+#define BCME_RADIOOFF 			-9	/* Radio Off */
-+#define BCME_NOTBANDLOCKED		-10	/* Not  bandlocked */
-+#define BCME_NOCLK			-11	/* No Clock*/
-+#define BCME_BADRATESET			-12	/* BAD RateSet*/
-+#define BCME_BADBAND			-13	/* BAD Band */
-+#define BCME_BUFTOOSHORT		-14	/* Buffer too short */	
-+#define BCME_BUFTOOLONG			-15	/* Buffer too Long */	
-+#define BCME_BUSY			-16	/* Busy*/	
-+#define BCME_NOTASSOCIATED		-17	/* Not associated*/
-+#define BCME_BADSSIDLEN			-18	/* BAD SSID Len */
-+#define BCME_OUTOFRANGECHAN		-19	/* Out of Range Channel*/
-+#define BCME_BADCHAN			-20	/* BAD Channel */
-+#define BCME_BADADDR			-21	/* BAD Address*/
-+#define BCME_NORESOURCE			-22	/* No resources*/
-+#define BCME_UNSUPPORTED		-23	/* Unsupported*/
-+#define BCME_BADLEN			-24	/* Bad Length*/
-+#define BCME_NOTREADY			-25	/* Not ready Yet*/
-+#define BCME_EPERM			-26	/* Not Permitted */
-+#define BCME_NOMEM			-27	/* No Memory */
-+#define BCME_ASSOCIATED			-28	/* Associated */
-+#define BCME_RANGE			-29	/* Range Error*/
-+#define BCME_NOTFOUND			-30	/* Not found */
-+#define BCME_LAST			BCME_NOTFOUND	
-+
-+#ifndef ABS
-+#define	ABS(a)			(((a)<0)?-(a):(a))
-+#endif
-+
-+#ifndef MIN
-+#define	MIN(a, b)		(((a)<(b))?(a):(b))
-+#endif
-+
-+#ifndef MAX
-+#define	MAX(a, b)		(((a)>(b))?(a):(b))
-+#endif
-+
-+#define CEIL(x, y)		(((x) + ((y)-1)) / (y))
-+#define	ROUNDUP(x, y)		((((x)+((y)-1))/(y))*(y))
-+#define	ISALIGNED(a, x)		(((a) & ((x)-1)) == 0)
-+#define	ISPOWEROF2(x)		((((x)-1)&(x))==0)
-+#define VALID_MASK(mask)	!((mask) & ((mask) + 1))
-+#define	OFFSETOF(type, member)	((uint)(uintptr)&((type *)0)->member)
-+#define ARRAYSIZE(a)		(sizeof(a)/sizeof(a[0]))
-+
-+/* bit map related macros */
-+#ifndef setbit
-+#define	NBBY	8	/* 8 bits per byte */
-+#define	setbit(a,i)	(((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
-+#define	clrbit(a,i)	(((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-+#define	isset(a,i)	(((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
-+#define	isclr(a,i)	((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-+#endif
-+
-+#define	NBITS(type)	(sizeof(type) * 8)
-+#define NBITVAL(bits)	(1 << (bits))
-+#define MAXBITVAL(bits)	((1 << (bits)) - 1)
-+
-+/* crc defines */
-+#define CRC8_INIT_VALUE  0xff		/* Initial CRC8 checksum value */
-+#define CRC8_GOOD_VALUE  0x9f		/* Good final CRC8 checksum value */
-+#define CRC16_INIT_VALUE 0xffff		/* Initial CRC16 checksum value */
-+#define CRC16_GOOD_VALUE 0xf0b8		/* Good final CRC16 checksum value */
-+#define CRC32_INIT_VALUE 0xffffffff	/* Initial CRC32 checksum value */
-+#define CRC32_GOOD_VALUE 0xdebb20e3	/* Good final CRC32 checksum value */
-+
-+/* bcm_format_flags() bit description structure */
-+typedef struct bcm_bit_desc {
-+	uint32	bit;
-+	char*	name;
-+} bcm_bit_desc_t;
-+
-+/* tag_ID/length/value_buffer tuple */
-+typedef struct bcm_tlv {
-+	uint8	id;
-+	uint8	len;
-+	uint8	data[1];
-+} bcm_tlv_t;
-+
-+/* Check that bcm_tlv_t fits into the given buflen */
-+#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len))
-+
-+/* buffer length for ethernet address from bcm_ether_ntoa() */
-+#define ETHER_ADDR_STR_LEN	18
-+
-+/* unaligned load and store macros */
-+#ifdef IL_BIGENDIAN
-+static INLINE uint32
-+load32_ua(uint8 *a)
-+{
-+	return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]);
-+}
-+
-+static INLINE void
-+store32_ua(uint8 *a, uint32 v)
-+{
-+	a[0] = (v >> 24) & 0xff;
-+	a[1] = (v >> 16) & 0xff;
-+	a[2] = (v >> 8) & 0xff;
-+	a[3] = v & 0xff;
-+}
-+
-+static INLINE uint16
-+load16_ua(uint8 *a)
-+{
-+	return ((a[0] << 8) | a[1]);
-+}
-+
-+static INLINE void
-+store16_ua(uint8 *a, uint16 v)
-+{
-+	a[0] = (v >> 8) & 0xff;
-+	a[1] = v & 0xff;
-+}
-+
-+#else
-+
-+static INLINE uint32
-+load32_ua(uint8 *a)
-+{
-+	return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]);
-+}
-+
-+static INLINE void
-+store32_ua(uint8 *a, uint32 v)
-+{
-+	a[3] = (v >> 24) & 0xff;
-+	a[2] = (v >> 16) & 0xff;
-+	a[1] = (v >> 8) & 0xff;
-+	a[0] = v & 0xff;
-+}
-+
-+static INLINE uint16
-+load16_ua(uint8 *a)
-+{
-+	return ((a[1] << 8) | a[0]);
-+}
-+
-+static INLINE void
-+store16_ua(uint8 *a, uint16 v)
-+{
-+	a[1] = (v >> 8) & 0xff;
-+	a[0] = v & 0xff;
-+}
-+
-+#endif
-+
-+/* externs */
-+/* crc */
-+extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc);
-+/* format/print */
-+/* IE parsing */
-+extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen);
-+extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
-+extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
-+
-+/* bcmerror*/
-+extern const char *bcmerrorstr(int bcmerror);
-+
-+/* multi-bool data type: set of bools, mbool is true if any is set */
-+typedef uint32 mbool;
-+#define mboolset(mb, bit)		(mb |= bit)		/* set one bool */
-+#define mboolclr(mb, bit)		(mb &= ~bit)		/* clear one bool */
-+#define mboolisset(mb, bit)		((mb & bit) != 0)	/* TRUE if one bool is set */
-+#define	mboolmaskset(mb, mask, val)	((mb) = (((mb) & ~(mask)) | (val)))
-+
-+/* power conversion */
-+extern uint16 bcm_qdbm_to_mw(uint8 qdbm);
-+extern uint8 bcm_mw_to_qdbm(uint16 mw);
-+
-+/* generic datastruct to help dump routines */
-+struct fielddesc {
-+	char 	*nameandfmt;
-+	uint32 	offset;
-+	uint32 	len;
-+};
-+
-+typedef  uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset);
-+extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str, char *buf, uint32 bufsize);
-+
-+extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len);
-+
-+#endif	/* _bcmutils_h_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/bitfuncs.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/bitfuncs.h
---- linux-2.6.16/arch/mips/bcm947xx/include/bitfuncs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/bitfuncs.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,85 @@
-+/*
-+ * bit manipulation utility functions
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id$
-+ */
-+
-+#ifndef _BITFUNCS_H
-+#define _BITFUNCS_H
-+
-+#include <typedefs.h>
-+
-+/* local prototypes */
-+static INLINE uint32 find_msbit(uint32 x);
-+
-+
-+/*
-+ * find_msbit: returns index of most significant set bit in x, with index
-+ *   range defined as 0-31.  NOTE: returns zero if input is zero.
-+ */
-+
-+#if defined(USE_PENTIUM_BSR) && defined(__GNUC__)
-+
-+/*
-+ * Implementation for Pentium processors and gcc.  Note that this
-+ * instruction is actually very slow on some processors (e.g., family 5,
-+ * model 2, stepping 12, "Pentium 75 - 200"), so we use the generic
-+ * implementation instead.
-+ */
-+static INLINE uint32 find_msbit(uint32 x)
-+{
-+	uint msbit;
-+        __asm__("bsrl %1,%0"
-+                :"=r" (msbit)
-+                :"r" (x));
-+        return msbit;
-+}
-+
-+#else
-+
-+/*
-+ * Generic Implementation
-+ */
-+
-+#define DB_POW_MASK16	0xffff0000
-+#define DB_POW_MASK8	0x0000ff00
-+#define DB_POW_MASK4	0x000000f0
-+#define DB_POW_MASK2	0x0000000c
-+#define DB_POW_MASK1	0x00000002
-+
-+static INLINE uint32 find_msbit(uint32 x)
-+{
-+	uint32 temp_x = x;
-+	uint msbit = 0;
-+	if (temp_x & DB_POW_MASK16) {
-+		temp_x >>= 16;
-+		msbit = 16;
-+	}
-+	if (temp_x & DB_POW_MASK8) {
-+		temp_x >>= 8;
-+		msbit += 8;
-+	}
-+	if (temp_x & DB_POW_MASK4) {
-+		temp_x >>= 4;
-+		msbit += 4;
-+	}
-+	if (temp_x & DB_POW_MASK2) {
-+		temp_x >>= 2;
-+		msbit += 2;
-+	}
-+	if (temp_x & DB_POW_MASK1) {
-+		msbit += 1;
-+	}
-+	return(msbit);
-+}
-+
-+#endif
-+
-+#endif /* _BITFUNCS_H */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/flash.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/flash.h
---- linux-2.6.16/arch/mips/bcm947xx/include/flash.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/flash.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,188 @@
-+/*
-+ * flash.h: Common definitions for flash access.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+/* Types of flashes we know about */
-+typedef enum _flash_type {OLD, BSC, SCS, AMD, SST, SFLASH} flash_type_t;
-+
-+/* Commands to write/erase the flases */
-+typedef struct _flash_cmds{
-+	flash_type_t	type;
-+	bool		need_unlock;
-+	uint16		pre_erase;
-+	uint16		erase_block;
-+	uint16		erase_chip;
-+	uint16		write_word;
-+	uint16		write_buf;
-+	uint16		clear_csr;
-+	uint16		read_csr;
-+	uint16		read_id;
-+	uint16		confirm;
-+	uint16		read_array;
-+} flash_cmds_t;
-+
-+#define	UNLOCK_CMD_WORDS	2
-+
-+typedef struct _unlock_cmd {
-+  uint		addr[UNLOCK_CMD_WORDS];
-+  uint16	cmd[UNLOCK_CMD_WORDS];
-+} unlock_cmd_t;
-+
-+/* Flash descriptors */
-+typedef struct _flash_desc {
-+	uint16		mfgid;		/* Manufacturer Id */
-+	uint16		devid;		/* Device Id */
-+	uint		size;		/* Total size in bytes */
-+	uint		width;		/* Device width in bytes */
-+	flash_type_t	type;		/* Device type old, S, J */
-+	uint		bsize;		/* Block size */
-+	uint		nb;		/* Number of blocks */
-+	uint		ff;		/* First full block */
-+	uint		lf;		/* Last full block */
-+	uint		nsub;		/* Number of subblocks */
-+	uint		*subblocks;	/* Offsets for subblocks */
-+	char		*desc;		/* Description */
-+} flash_desc_t;
-+
-+
-+#ifdef	DECLARE_FLASHES
-+flash_cmds_t sflash_cmd_t = 
-+	{ SFLASH,	0,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00 };
-+
-+flash_cmds_t flash_cmds[] = {
-+/*	  type		needu	preera	eraseb	erasech	write	wbuf	clcsr	rdcsr	rdid	confrm	read */
-+	{ BSC,		0,	0x00,	0x20,	0x00,	0x40,	0x00,	0x50,	0x70,	0x90,	0xd0,	0xff },
-+	{ SCS,		0,	0x00,	0x20,	0x00,	0x40,	0xe8,	0x50,	0x70,	0x90,	0xd0,	0xff },
-+	{ AMD,		1,	0x80,	0x30,	0x10,	0xa0,	0x00,	0x00,	0x00,	0x90,	0x00,	0xf0 },
-+	{ SST,		1,	0x80,	0x50,	0x10,	0xa0,	0x00,	0x00,	0x00,	0x90,	0x00,	0xf0 },
-+	{ 0 }
-+};
-+
-+unlock_cmd_t unlock_cmd_amd = {
-+#ifdef MIPSEB
-+/* addr: */	{ 0x0aa8,	0x0556},
-+#else
-+/* addr: */	{ 0x0aaa,	0x0554},
-+#endif
-+/* data: */	{ 0xaa,		0x55}
-+};
-+
-+unlock_cmd_t unlock_cmd_sst = {
-+#ifdef MIPSEB
-+/* addr: */	{ 0xaaa8,	0x5556},
-+#else
-+/* addr: */	{ 0xaaaa,	0x5554},
-+#endif
-+/* data: */	{ 0xaa,		0x55}
-+};
-+
-+#define AMD_CMD 0xaaa
-+#define SST_CMD 0xaaaa
-+
-+/* intel unlock block cmds */
-+#define INTEL_UNLOCK1	0x60
-+#define INTEL_UNLOCK2	0xD0
-+
-+/* Just eight blocks of 8KB byte each */
-+
-+uint blk8x8k[] = { 0x00000000,
-+		   0x00002000,
-+		   0x00004000,
-+		   0x00006000,
-+		   0x00008000,
-+		   0x0000a000,
-+		   0x0000c000,
-+		   0x0000e000,
-+		   0x00010000
-+};
-+
-+/* Funky AMD arrangement for 29xx800's */
-+uint amd800[] = { 0x00000000,		/* 16KB */
-+		  0x00004000,		/* 32KB */
-+		  0x0000c000,		/* 8KB */
-+		  0x0000e000,		/* 8KB */
-+		  0x00010000,		/* 8KB */
-+		  0x00012000,		/* 8KB */
-+		  0x00014000,		/* 32KB */
-+		  0x0001c000,		/* 16KB */
-+		  0x00020000
-+};
-+
-+/* AMD arrangement for 29xx160's */
-+uint amd4112[] = { 0x00000000,		/* 32KB */
-+		   0x00008000,		/* 8KB */
-+		   0x0000a000,		/* 8KB */
-+		   0x0000c000,		/* 16KB */
-+		   0x00010000
-+};
-+uint amd2114[] = { 0x00000000,		/* 16KB */
-+		   0x00004000,		/* 8KB */
-+		   0x00006000,		/* 8KB */
-+		   0x00008000,		/* 32KB */
-+		   0x00010000
-+};
-+
-+
-+flash_desc_t sflash_desc =  
-+	{ 0, 0, 0, 0,	SFLASH, 0, 0,  0, 0,  0, NULL,    "SFLASH" };
-+
-+flash_desc_t flashes[] = {
-+	{ 0x00b0, 0x00d0, 0x0200000, 2,	SCS, 0x10000, 32,  0, 31,  0, NULL,    "Intel 28F160S3/5 1Mx16" },
-+	{ 0x00b0, 0x00d4, 0x0400000, 2,	SCS, 0x10000, 64,  0, 63,  0, NULL,    "Intel 28F320S3/5 2Mx16" },
-+	{ 0x0089, 0x8890, 0x0200000, 2,	BSC, 0x10000, 32,  0, 30,  8, blk8x8k, "Intel 28F160B3 1Mx16 TopB" },
-+	{ 0x0089, 0x8891, 0x0200000, 2,	BSC, 0x10000, 32,  1, 31,  8, blk8x8k, "Intel 28F160B3 1Mx16 BotB" },
-+	{ 0x0089, 0x8896, 0x0400000, 2,	BSC, 0x10000, 64,  0, 62,  8, blk8x8k, "Intel 28F320B3 2Mx16 TopB" },
-+	{ 0x0089, 0x8897, 0x0400000, 2,	BSC, 0x10000, 64,  1, 63,  8, blk8x8k, "Intel 28F320B3 2Mx16 BotB" },
-+	{ 0x0089, 0x8898, 0x0800000, 2,	BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640B3 4Mx16 TopB" },
-+	{ 0x0089, 0x8899, 0x0800000, 2,	BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640B3 4Mx16 BotB" },
-+	{ 0x0089, 0x88C2, 0x0200000, 2,	BSC, 0x10000, 32,  0, 30,  8, blk8x8k, "Intel 28F160C3 1Mx16 TopB" },
-+	{ 0x0089, 0x88C3, 0x0200000, 2,	BSC, 0x10000, 32,  1, 31,  8, blk8x8k, "Intel 28F160C3 1Mx16 BotB" },
-+	{ 0x0089, 0x88C4, 0x0400000, 2,	BSC, 0x10000, 64,  0, 62,  8, blk8x8k, "Intel 28F320C3 2Mx16 TopB" },
-+	{ 0x0089, 0x88C5, 0x0400000, 2,	BSC, 0x10000, 64,  1, 63,  8, blk8x8k, "Intel 28F320C3 2Mx16 BotB" },
-+	{ 0x0089, 0x88CC, 0x0800000, 2,	BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640C3 4Mx16 TopB" },
-+	{ 0x0089, 0x88CD, 0x0800000, 2,	BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640C3 4Mx16 BotB" },
-+	{ 0x0089, 0x0014, 0x0400000, 2,	SCS, 0x20000, 32,  0, 31,  0, NULL,    "Intel 28F320J5 2Mx16" },
-+	{ 0x0089, 0x0015, 0x0800000, 2,	SCS, 0x20000, 64,  0, 63,  0, NULL,    "Intel 28F640J5 4Mx16" },
-+	{ 0x0089, 0x0016, 0x0400000, 2,	SCS, 0x20000, 32,  0, 31,  0, NULL,    "Intel 28F320J3 2Mx16" },
-+	{ 0x0089, 0x0017, 0x0800000, 2,	SCS, 0x20000, 64,  0, 63,  0, NULL,    "Intel 28F640J3 4Mx16" },
-+	{ 0x0089, 0x0018, 0x1000000, 2,	SCS, 0x20000, 128, 0, 127, 0, NULL,    "Intel 28F128J3 8Mx16" },
-+	{ 0x00b0, 0x00e3, 0x0400000, 2,	BSC, 0x10000, 64,  1, 63,  8, blk8x8k, "Sharp 28F320BJE 2Mx16 BotB" },
-+	{ 0x0001, 0x224a, 0x0100000, 2,	AMD, 0x10000, 16,  0, 13,  8, amd800,  "AMD 29DL800BT 512Kx16 TopB" },
-+	{ 0x0001, 0x22cb, 0x0100000, 2,	AMD, 0x10000, 16,  2, 15,  8, amd800,  "AMD 29DL800BB 512Kx16 BotB" },
-+	{ 0x0001, 0x22c4, 0x0200000, 2,	AMD, 0x10000, 32,  0, 30,  4, amd2114, "AMD 29lv160DT 1Mx16 TopB" },
-+	{ 0x0001, 0x2249, 0x0200000, 2,	AMD, 0x10000, 32,  1, 31,  4, amd4112, "AMD 29lv160DB 1Mx16 BotB" },
-+	{ 0x0001, 0x22f6, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" },
-+	{ 0x0001, 0x22f9, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" },
-+	{ 0x0001, 0x227e, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" },
-+	{ 0x0001, 0x2200, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" },
-+	{ 0x0020, 0x22CA, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "ST 29w320DT 2Mx16 TopB" },
-+	{ 0x0020, 0x22CB, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "ST 29w320DB 2Mx16 BotB" },
-+	{ 0x00C2, 0x00A7, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "MX29LV320T 2Mx16 TopB" },
-+	{ 0x00C2, 0x00A8, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "MX29LV320B 2Mx16 BotB" },
-+	{ 0x0004, 0x22F6, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "MBM29LV320TE 2Mx16 TopB" },
-+	{ 0x0004, 0x22F9, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "MBM29LV320BE 2Mx16 BotB" },
-+	{ 0x0098, 0x009A, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "TC58FVT321 2Mx16 TopB" },
-+	{ 0x0098, 0x009C, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "TC58FVB321 2Mx16 BotB" }, 
-+	{ 0x00C2, 0x22A7, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "MX29LV320T 2Mx16 TopB" },
-+	{ 0x00C2, 0x22A8, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "MX29LV320B 2Mx16 BotB" },
-+	{ 0x00BF, 0x2783, 0x0400000, 2,	SST, 0x10000, 64,  0, 63,  0, NULL,    "SST39VF320 2Mx16" },
-+	{ 0,      0,      0,         0,	OLD, 0,       0,   0, 0,   0, NULL,    NULL },
-+};
-+
-+#else
-+
-+extern flash_cmds_t flash_cmds[];
-+extern unlock_cmd_t unlock_cmd;
-+extern flash_desc_t flashes[];
-+
-+#endif
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/flashutl.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/flashutl.h
---- linux-2.6.16/arch/mips/bcm947xx/include/flashutl.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/flashutl.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,27 @@
-+/*
-+ * BCM47XX FLASH driver interface
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id$
-+ */
-+
-+#ifndef _flashutl_h_
-+#define _flashutl_h_
-+
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+int	sysFlashInit(char *flash_str);
-+int sysFlashRead(uint off, uchar *dst, uint bytes);
-+int sysFlashWrite(uint off, uchar *src, uint bytes);
-+void nvWrite(unsigned short *data, unsigned int len);
-+
-+#endif	/* _LANGUAGE_ASSEMBLY */
-+
-+#endif /* _flashutl_h_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/hndmips.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/hndmips.h
---- linux-2.6.16/arch/mips/bcm947xx/include/hndmips.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/hndmips.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,16 @@
-+/*
-+ * Alternate include file for HND sbmips.h since CFE also ships with
-+ * a sbmips.h.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#include "sbmips.h"
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/linux_osl.h
---- linux-2.6.16/arch/mips/bcm947xx/include/linux_osl.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/linux_osl.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,331 @@
-+/*
-+ * Linux OS Independent Layer
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _linux_osl_h_
-+#define _linux_osl_h_
-+
-+#include <typedefs.h>
-+
-+/* use current 2.4.x calling conventions */
-+#include <linuxver.h>
-+
-+/* assert and panic */
-+#ifdef __GNUC__
-+#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
-+#if GCC_VERSION > 30100
-+#define	ASSERT(exp)		do {} while (0)
-+#else
-+/* ASSERT could causes segmentation fault on GCC3.1, use empty instead*/
-+#define	ASSERT(exp)		
-+#endif
-+#endif
-+
-+/* microsecond delay */
-+#define	OSL_DELAY(usec)		osl_delay(usec)
-+extern void osl_delay(uint usec);
-+
-+/* PCI configuration space access macros */
-+#define	OSL_PCI_READ_CONFIG(osh, offset, size) \
-+	osl_pci_read_config((osh), (offset), (size))
-+#define	OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \
-+	osl_pci_write_config((osh), (offset), (size), (val))
-+extern uint32 osl_pci_read_config(osl_t *osh, uint size, uint offset);
-+extern void osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val);
-+
-+/* PCI device bus # and slot # */
-+#define OSL_PCI_BUS(osh)	osl_pci_bus(osh)
-+#define OSL_PCI_SLOT(osh)	osl_pci_slot(osh)
-+extern uint osl_pci_bus(osl_t *osh);
-+extern uint osl_pci_slot(osl_t *osh);
-+
-+/* OSL initialization */
-+extern osl_t *osl_attach(void *pdev);
-+extern void osl_detach(osl_t *osh);
-+
-+/* host/bus architecture-specific byte swap */
-+#define BUS_SWAP32(v)		(v)
-+
-+/* general purpose memory allocation */
-+
-+#define	MALLOC(osh, size)	kmalloc(size, GFP_ATOMIC)
-+#define	MFREE(osh, addr, size)	kfree(addr);
-+
-+#define	MALLOC_FAILED(osh)	osl_malloc_failed((osh))
-+
-+extern void *osl_malloc(osl_t *osh, uint size);
-+extern void osl_mfree(osl_t *osh, void *addr, uint size);
-+extern uint osl_malloced(osl_t *osh);
-+extern uint osl_malloc_failed(osl_t *osh);
-+
-+/* allocate/free shared (dma-able) consistent memory */
-+#define	DMA_CONSISTENT_ALIGN	PAGE_SIZE
-+#define	DMA_ALLOC_CONSISTENT(osh, size, pap) \
-+	osl_dma_alloc_consistent((osh), (size), (pap))
-+#define	DMA_FREE_CONSISTENT(osh, va, size, pa) \
-+	osl_dma_free_consistent((osh), (void*)(va), (size), (pa))
-+extern void *osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap);
-+extern void osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa);
-+
-+/* map/unmap direction */
-+#define	DMA_TX	1
-+#define	DMA_RX	2
-+
-+/* register access macros */
-+#if defined(BCMJTAG)
-+#include <bcmjtag.h>
-+#define	R_REG(r)	bcmjtag_read(NULL, (uint32)(r), sizeof (*(r)))
-+#define	W_REG(r, v)	bcmjtag_write(NULL, (uint32)(r), (uint32)(v), sizeof (*(r)))
-+#endif
-+
-+/*
-+ * BINOSL selects the slightly slower function-call-based binary compatible osl.
-+ * Macros expand to calls to functions defined in linux_osl.c .
-+ */
-+#ifndef BINOSL
-+
-+/* string library, kernel mode */
-+#define	printf(fmt, args...)	printk(fmt, ## args)
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+
-+/* register access macros */
-+#if !defined(BCMJTAG)
-+#ifndef IL_BIGENDIAN   
-+#define R_REG(r) ( \
-+	sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \
-+	sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \
-+	readl((volatile uint32*)(r)) \
-+)
-+#define W_REG(r, v) do { \
-+	switch (sizeof(*(r))) { \
-+	case sizeof(uint8):	writeb((uint8)(v), (volatile uint8*)(r)); break; \
-+	case sizeof(uint16):	writew((uint16)(v), (volatile uint16*)(r)); break; \
-+	case sizeof(uint32):	writel((uint32)(v), (volatile uint32*)(r)); break; \
-+	} \
-+} while (0)
-+#else	/* IL_BIGENDIAN */
-+#define R_REG(r) ({ \
-+	__typeof(*(r)) __osl_v; \
-+	switch (sizeof(*(r))) { \
-+	case sizeof(uint8):	__osl_v = readb((volatile uint8*)((uint32)r^3)); break; \
-+	case sizeof(uint16):	__osl_v = readw((volatile uint16*)((uint32)r^2)); break; \
-+	case sizeof(uint32):	__osl_v = readl((volatile uint32*)(r)); break; \
-+	} \
-+	__osl_v; \
-+})
-+#define W_REG(r, v) do { \
-+	switch (sizeof(*(r))) { \
-+	case sizeof(uint8):	writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \
-+	case sizeof(uint16):	writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \
-+	case sizeof(uint32):	writel((uint32)(v), (volatile uint32*)(r)); break; \
-+	} \
-+} while (0)
-+#endif
-+#endif
-+
-+#define	AND_REG(r, v)		W_REG((r), R_REG(r) & (v))
-+#define	OR_REG(r, v)		W_REG((r), R_REG(r) | (v))
-+
-+/* bcopy, bcmp, and bzero */
-+#define	bcopy(src, dst, len)	memcpy((dst), (src), (len))
-+#define	bcmp(b1, b2, len)	memcmp((b1), (b2), (len))
-+#define	bzero(b, len)		memset((b), '\0', (len))
-+
-+/* uncached virtual address */
-+#ifdef mips
-+#define OSL_UNCACHED(va)	KSEG1ADDR((va))
-+#include <asm/addrspace.h>
-+#else
-+#define OSL_UNCACHED(va)	(va)
-+#endif
-+
-+/* get processor cycle count */
-+#if defined(mips)
-+#define	OSL_GETCYCLES(x)	((x) = read_c0_count() * 2)
-+#elif defined(__i386__)
-+#define	OSL_GETCYCLES(x)	rdtscl((x))
-+#else
-+#define OSL_GETCYCLES(x)	((x) = 0)
-+#endif
-+
-+/* dereference an address that may cause a bus exception */
-+#ifdef mips
-+#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17))
-+#define BUSPROBE(val, addr)	panic("get_dbe() will not fixup a bus exception when compiled into a module")
-+#else
-+#define	BUSPROBE(val, addr)	get_dbe((val), (addr))
-+#include <asm/paccess.h>
-+#endif
-+#else
-+#define	BUSPROBE(val, addr)	({ (val) = R_REG((addr)); 0; })
-+#endif
-+
-+/* map/unmap physical to virtual I/O */
-+#define	REG_MAP(pa, size)	ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
-+#define	REG_UNMAP(va)		iounmap((void *)(va))
-+
-+/* shared (dma-able) memory access macros */
-+#define	R_SM(r)			*(r)
-+#define	W_SM(r, v)		(*(r) = (v))
-+#define	BZERO_SM(r, len)	memset((r), '\0', (len))
-+
-+/* packet primitives */
-+#define	PKTGET(osh, len, send)		osl_pktget((osh), (len), (send))
-+#define	PKTFREE(osh, skb, send)		osl_pktfree((skb))
-+#define	PKTDATA(osh, skb)		(((struct sk_buff*)(skb))->data)
-+#define	PKTLEN(osh, skb)		(((struct sk_buff*)(skb))->len)
-+#define PKTHEADROOM(osh, skb)		(PKTDATA(osh,skb)-(((struct sk_buff*)(skb))->head))
-+#define PKTTAILROOM(osh, skb)		((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail))
-+#define	PKTNEXT(osh, skb)		(((struct sk_buff*)(skb))->next)
-+#define	PKTSETNEXT(skb, x)		(((struct sk_buff*)(skb))->next = (struct sk_buff*)(x))
-+#define	PKTSETLEN(osh, skb, len)	__skb_trim((struct sk_buff*)(skb), (len))
-+#define	PKTPUSH(osh, skb, bytes)	skb_push((struct sk_buff*)(skb), (bytes))
-+#define	PKTPULL(osh, skb, bytes)	skb_pull((struct sk_buff*)(skb), (bytes))
-+#define	PKTDUP(osh, skb)		skb_clone((struct sk_buff*)(skb), GFP_ATOMIC)
-+#define	PKTCOOKIE(skb)			((void*)((struct sk_buff*)(skb))->csum)
-+#define	PKTSETCOOKIE(skb, x)		(((struct sk_buff*)(skb))->csum = (uint)(x))
-+#define	PKTLINK(skb)			(((struct sk_buff*)(skb))->prev)
-+#define	PKTSETLINK(skb, x)		(((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x))
-+#define	PKTPRIO(skb)			(((struct sk_buff*)(skb))->priority)
-+#define	PKTSETPRIO(skb, x)		(((struct sk_buff*)(skb))->priority = (x))
-+extern void *osl_pktget(osl_t *osh, uint len, bool send);
-+extern void osl_pktfree(void *skb);
-+
-+#else	/* BINOSL */                                    
-+
-+/* string library */
-+#ifndef LINUX_OSL
-+#undef printf
-+#define	printf(fmt, args...)		osl_printf((fmt), ## args)
-+#undef sprintf
-+#define sprintf(buf, fmt, args...)	osl_sprintf((buf), (fmt), ## args)
-+#undef strcmp
-+#define	strcmp(s1, s2)			osl_strcmp((s1), (s2))
-+#undef strncmp
-+#define	strncmp(s1, s2, n)		osl_strncmp((s1), (s2), (n))
-+#undef strlen
-+#define strlen(s)			osl_strlen((s))
-+#undef strcpy
-+#define	strcpy(d, s)			osl_strcpy((d), (s))
-+#undef strncpy
-+#define	strncpy(d, s, n)		osl_strncpy((d), (s), (n))
-+#endif
-+extern int osl_printf(const char *format, ...);
-+extern int osl_sprintf(char *buf, const char *format, ...);
-+extern int osl_strcmp(const char *s1, const char *s2);
-+extern int osl_strncmp(const char *s1, const char *s2, uint n);
-+extern int osl_strlen(const char *s);
-+extern char* osl_strcpy(char *d, const char *s);
-+extern char* osl_strncpy(char *d, const char *s, uint n);
-+
-+/* register access macros */
-+#if !defined(BCMJTAG)
-+#define R_REG(r) ( \
-+	sizeof(*(r)) == sizeof(uint8) ? osl_readb((volatile uint8*)(r)) : \
-+	sizeof(*(r)) == sizeof(uint16) ? osl_readw((volatile uint16*)(r)) : \
-+	osl_readl((volatile uint32*)(r)) \
-+)
-+#define W_REG(r, v) do { \
-+	switch (sizeof(*(r))) { \
-+	case sizeof(uint8):	osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \
-+	case sizeof(uint16):	osl_writew((uint16)(v), (volatile uint16*)(r)); break; \
-+	case sizeof(uint32):	osl_writel((uint32)(v), (volatile uint32*)(r)); break; \
-+	} \
-+} while (0)
-+#endif
-+
-+#define	AND_REG(r, v)		W_REG((r), R_REG(r) & (v))
-+#define	OR_REG(r, v)		W_REG((r), R_REG(r) | (v))
-+extern uint8 osl_readb(volatile uint8 *r);
-+extern uint16 osl_readw(volatile uint16 *r);
-+extern uint32 osl_readl(volatile uint32 *r);
-+extern void osl_writeb(uint8 v, volatile uint8 *r);
-+extern void osl_writew(uint16 v, volatile uint16 *r);
-+extern void osl_writel(uint32 v, volatile uint32 *r);
-+
-+/* bcopy, bcmp, and bzero */
-+extern void bcopy(const void *src, void *dst, int len);
-+extern int bcmp(const void *b1, const void *b2, int len);
-+extern void bzero(void *b, int len);
-+
-+/* uncached virtual address */
-+#define OSL_UNCACHED(va)	osl_uncached((va))
-+extern void *osl_uncached(void *va);
-+
-+/* get processor cycle count */
-+#define OSL_GETCYCLES(x)	((x) = osl_getcycles())
-+extern uint osl_getcycles(void);
-+
-+/* dereference an address that may target abort */
-+#define	BUSPROBE(val, addr)	osl_busprobe(&(val), (addr))
-+extern int osl_busprobe(uint32 *val, uint32 addr);
-+
-+/* map/unmap physical to virtual */
-+#define	REG_MAP(pa, size)	osl_reg_map((pa), (size))
-+#define	REG_UNMAP(va)		osl_reg_unmap((va))
-+extern void *osl_reg_map(uint32 pa, uint size);
-+extern void osl_reg_unmap(void *va);
-+
-+/* shared (dma-able) memory access macros */
-+#define	R_SM(r)			*(r)
-+#define	W_SM(r, v)		(*(r) = (v))
-+#define	BZERO_SM(r, len)	bzero((r), (len))
-+
-+/* packet primitives */
-+#define	PKTGET(osh, len, send)		osl_pktget((osh), (len), (send))
-+#define	PKTFREE(osh, skb, send)		osl_pktfree((skb))
-+#define	PKTDATA(osh, skb)		osl_pktdata((osh), (skb))
-+#define	PKTLEN(osh, skb)		osl_pktlen((osh), (skb))
-+#define PKTHEADROOM(osh, skb)		osl_pktheadroom((osh), (skb))
-+#define PKTTAILROOM(osh, skb)		osl_pkttailroom((osh), (skb))
-+#define	PKTNEXT(osh, skb)		osl_pktnext((osh), (skb))
-+#define	PKTSETNEXT(skb, x)		osl_pktsetnext((skb), (x))
-+#define	PKTSETLEN(osh, skb, len)	osl_pktsetlen((osh), (skb), (len))
-+#define	PKTPUSH(osh, skb, bytes)	osl_pktpush((osh), (skb), (bytes))
-+#define	PKTPULL(osh, skb, bytes)	osl_pktpull((osh), (skb), (bytes))
-+#define	PKTDUP(osh, skb)		osl_pktdup((osh), (skb))
-+#define	PKTCOOKIE(skb)			osl_pktcookie((skb))
-+#define	PKTSETCOOKIE(skb, x)		osl_pktsetcookie((skb), (x))
-+#define	PKTLINK(skb)			osl_pktlink((skb))
-+#define	PKTSETLINK(skb, x)		osl_pktsetlink((skb), (x))
-+#define	PKTPRIO(skb)			osl_pktprio((skb))
-+#define	PKTSETPRIO(skb, x)		osl_pktsetprio((skb), (x))
-+extern void *osl_pktget(osl_t *osh, uint len, bool send);
-+extern void osl_pktfree(void *skb);
-+extern uchar *osl_pktdata(osl_t *osh, void *skb);
-+extern uint osl_pktlen(osl_t *osh, void *skb);
-+extern uint osl_pktheadroom(osl_t *osh, void *skb);
-+extern uint osl_pkttailroom(osl_t *osh, void *skb);
-+extern void *osl_pktnext(osl_t *osh, void *skb);
-+extern void osl_pktsetnext(void *skb, void *x);
-+extern void osl_pktsetlen(osl_t *osh, void *skb, uint len);
-+extern uchar *osl_pktpush(osl_t *osh, void *skb, int bytes);
-+extern uchar *osl_pktpull(osl_t *osh, void *skb, int bytes);
-+extern void *osl_pktdup(osl_t *osh, void *skb);
-+extern void *osl_pktcookie(void *skb);
-+extern void osl_pktsetcookie(void *skb, void *x);
-+extern void *osl_pktlink(void *skb);
-+extern void osl_pktsetlink(void *skb, void *x);
-+extern uint osl_pktprio(void *skb);
-+extern void osl_pktsetprio(void *skb, uint x);
-+
-+#endif	/* BINOSL */
-+
-+#define OSL_ERROR(bcmerror)	osl_error(bcmerror)
-+extern int osl_error(int bcmerror);
-+
-+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
-+#define	PKTBUFSZ	2048
-+
-+#endif	/* _linux_osl_h_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/linuxver.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/linuxver.h
---- linux-2.6.16/arch/mips/bcm947xx/include/linuxver.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/linuxver.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,389 @@
-+/*
-+ * Linux-specific abstractions to gain some independence from linux kernel versions.
-+ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *   
-+ * $Id$
-+ */
-+
-+#ifndef _linuxver_h_
-+#define _linuxver_h_
-+
-+#include <linux/config.h>
-+#include <linux/version.h>
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0))
-+/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */
-+#ifdef __UNDEF_NO_VERSION__
-+#undef __NO_VERSION__
-+#else
-+#define __NO_VERSION__
-+#endif
-+#endif
-+
-+#if defined(MODULE) && defined(MODVERSIONS)
-+#include <linux/modversions.h>
-+#endif
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-+#include <linux/moduleparam.h>
-+#endif
-+
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) 
-+#define module_param(_name_, _type_, _perm_)	MODULE_PARM(_name_, "i")	
-+#define module_param_string(_name_, _string_, _size_, _perm_)	MODULE_PARM(_string_, "c" __MODULE_STRING(_size_))
-+#endif
-+
-+/* linux/malloc.h is deprecated, use linux/slab.h instead. */
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9))
-+#include <linux/malloc.h>
-+#else
-+#include <linux/slab.h>
-+#endif
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/string.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+#include <linux/netdevice.h>
-+#include <asm/io.h>
-+
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41))
-+#include <linux/workqueue.h>
-+#else
-+#include <linux/tqueue.h>
-+#ifndef work_struct
-+#define work_struct tq_struct
-+#endif
-+#ifndef INIT_WORK
-+#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data))
-+#endif
-+#ifndef schedule_work
-+#define schedule_work(_work) schedule_task((_work))
-+#endif
-+#ifndef flush_scheduled_work
-+#define flush_scheduled_work() flush_scheduled_tasks()
-+#endif
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
-+/* Some distributions have their own 2.6.x compatibility layers */
-+#ifndef IRQ_NONE
-+typedef void irqreturn_t;
-+#define IRQ_NONE
-+#define IRQ_HANDLED
-+#define IRQ_RETVAL(x)
-+#endif
-+#else
-+typedef irqreturn_t (*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs);
-+#endif
-+
-+#ifndef __exit
-+#define __exit
-+#endif
-+#ifndef __devexit
-+#define __devexit
-+#endif
-+#ifndef __devinit
-+#define __devinit	__init
-+#endif
-+#ifndef __devinitdata
-+#define __devinitdata
-+#endif
-+#ifndef __devexit_p
-+#define __devexit_p(x)	x
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
-+
-+#define pci_get_drvdata(dev)		(dev)->sysdata
-+#define pci_set_drvdata(dev, value)	(dev)->sysdata=(value)
-+
-+/*
-+ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration
-+ */
-+
-+struct pci_device_id {
-+	unsigned int vendor, device;		/* Vendor and device ID or PCI_ANY_ID */
-+	unsigned int subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
-+	unsigned int class, class_mask;		/* (class,subclass,prog-if) triplet */
-+	unsigned long driver_data;		/* Data private to the driver */
-+};
-+
-+struct pci_driver {
-+	struct list_head node;
-+	char *name;
-+	const struct pci_device_id *id_table;	/* NULL if wants all devices */
-+	int (*probe)(struct pci_dev *dev, const struct pci_device_id *id);	/* New device inserted */
-+	void (*remove)(struct pci_dev *dev);	/* Device removed (NULL if not a hot-plug capable driver) */
-+	void (*suspend)(struct pci_dev *dev);	/* Device suspended */
-+	void (*resume)(struct pci_dev *dev);	/* Device woken up */
-+};
-+
-+#define MODULE_DEVICE_TABLE(type, name)
-+#define PCI_ANY_ID (~0)
-+
-+/* compatpci.c */
-+#define pci_module_init pci_register_driver
-+extern int pci_register_driver(struct pci_driver *drv);
-+extern void pci_unregister_driver(struct pci_driver *drv);
-+
-+#endif /* PCI registration */
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18))
-+#ifdef MODULE
-+#define module_init(x) int init_module(void) { return x(); }
-+#define module_exit(x) void cleanup_module(void) { x(); }
-+#else
-+#define module_init(x)	__initcall(x);
-+#define module_exit(x)	__exitcall(x);
-+#endif
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48))
-+#define list_for_each(pos, head) \
-+	for (pos = (head)->next; pos != (head); pos = pos->next)
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13))
-+#define pci_resource_start(dev, bar)	((dev)->base_address[(bar)])
-+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44))
-+#define pci_resource_start(dev, bar)	((dev)->resource[(bar)].start)
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23))
-+#define pci_enable_device(dev) do { } while (0)
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14))
-+#define net_device device
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42))
-+
-+/*
-+ * DMA mapping
-+ *
-+ * See linux/Documentation/DMA-mapping.txt
-+ */
-+
-+#ifndef PCI_DMA_TODEVICE
-+#define	PCI_DMA_TODEVICE	1
-+#define	PCI_DMA_FROMDEVICE	2
-+#endif
-+
-+typedef u32 dma_addr_t;
-+
-+/* Pure 2^n version of get_order */
-+static inline int get_order(unsigned long size)
-+{
-+	int order;
-+
-+	size = (size-1) >> (PAGE_SHIFT-1);
-+	order = -1;
-+	do {
-+		size >>= 1;
-+		order++;
-+	} while (size);
-+	return order;
-+}
-+
-+static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
-+					 dma_addr_t *dma_handle)
-+{
-+	void *ret;
-+	int gfp = GFP_ATOMIC | GFP_DMA;
-+
-+	ret = (void *)__get_free_pages(gfp, get_order(size));
-+
-+	if (ret != NULL) {
-+		memset(ret, 0, size);
-+		*dma_handle = virt_to_bus(ret);
-+	}
-+	return ret;
-+}
-+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
-+				       void *vaddr, dma_addr_t dma_handle)
-+{
-+	free_pages((unsigned long)vaddr, get_order(size));
-+}
-+#ifdef ILSIM
-+extern uint pci_map_single(void *dev, void *va, uint size, int direction);
-+extern void pci_unmap_single(void *dev, uint pa, uint size, int direction);
-+#else
-+#define pci_map_single(cookie, address, size, dir)	virt_to_bus(address)
-+#define pci_unmap_single(cookie, address, size, dir)
-+#endif
-+
-+#endif /* DMA mapping */
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43))
-+
-+#define dev_kfree_skb_any(a)		dev_kfree_skb(a)
-+#define netif_down(dev)			do { (dev)->start = 0; } while(0)
-+
-+/* pcmcia-cs provides its own netdevice compatibility layer */
-+#ifndef _COMPAT_NETDEVICE_H
-+
-+/*
-+ * SoftNet
-+ *
-+ * For pre-softnet kernels we need to tell the upper layer not to
-+ * re-enter start_xmit() while we are in there. However softnet
-+ * guarantees not to enter while we are in there so there is no need
-+ * to do the netif_stop_queue() dance unless the transmit queue really
-+ * gets stuck. This should also improve performance according to tests
-+ * done by Aman Singla.
-+ */
-+
-+#define dev_kfree_skb_irq(a)		dev_kfree_skb(a)
-+#define netif_wake_queue(dev)		do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0)
-+#define netif_stop_queue(dev)		set_bit(0, &(dev)->tbusy)
-+
-+static inline void netif_start_queue(struct net_device *dev)
-+{
-+	dev->tbusy = 0;
-+	dev->interrupt = 0;
-+	dev->start = 1;
-+}
-+
-+#define netif_queue_stopped(dev)	(dev)->tbusy
-+#define netif_running(dev)		(dev)->start
-+
-+#endif /* _COMPAT_NETDEVICE_H */
-+
-+#define netif_device_attach(dev)	netif_start_queue(dev)
-+#define netif_device_detach(dev)	netif_stop_queue(dev)
-+
-+/* 2.4.x renamed bottom halves to tasklets */
-+#define tasklet_struct				tq_struct
-+static inline void tasklet_schedule(struct tasklet_struct *tasklet)
-+{
-+	queue_task(tasklet, &tq_immediate);
-+	mark_bh(IMMEDIATE_BH);
-+}
-+
-+static inline void tasklet_init(struct tasklet_struct *tasklet,
-+				void (*func)(unsigned long),
-+				unsigned long data)
-+{
-+	tasklet->next = NULL;
-+	tasklet->sync = 0;
-+	tasklet->routine = (void (*)(void *))func;
-+	tasklet->data = (void *)data;
-+}
-+#define tasklet_kill(tasklet)			{do{} while(0);}
-+
-+/* 2.4.x introduced del_timer_sync() */
-+#define del_timer_sync(timer) del_timer(timer)
-+
-+#else
-+
-+#define netif_down(dev)
-+
-+#endif /* SoftNet */
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3))
-+
-+/*
-+ * Emit code to initialise a tq_struct's routine and data pointers
-+ */
-+#define PREPARE_TQUEUE(_tq, _routine, _data)			\
-+	do {							\
-+		(_tq)->routine = _routine;			\
-+		(_tq)->data = _data;				\
-+	} while (0)
-+
-+/*
-+ * Emit code to initialise all of a tq_struct
-+ */
-+#define INIT_TQUEUE(_tq, _routine, _data)			\
-+	do {							\
-+		INIT_LIST_HEAD(&(_tq)->list);			\
-+		(_tq)->sync = 0;				\
-+		PREPARE_TQUEUE((_tq), (_routine), (_data));	\
-+	} while (0)
-+
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6))
-+
-+/* Power management related routines */
-+
-+static inline int
-+pci_save_state(struct pci_dev *dev, u32 *buffer)
-+{
-+	int i;
-+	if (buffer) {
-+		for (i = 0; i < 16; i++)
-+			pci_read_config_dword(dev, i * 4,&buffer[i]);
-+	}
-+	return 0;
-+}
-+
-+static inline int 
-+pci_restore_state(struct pci_dev *dev, u32 *buffer)
-+{
-+	int i;
-+
-+	if (buffer) {
-+		for (i = 0; i < 16; i++)
-+			pci_write_config_dword(dev,i * 4, buffer[i]);
-+	}
-+	/*
-+	 * otherwise, write the context information we know from bootup.
-+	 * This works around a problem where warm-booting from Windows
-+	 * combined with a D3(hot)->D0 transition causes PCI config
-+	 * header data to be forgotten.
-+	 */	
-+	else {
-+		for (i = 0; i < 6; i ++)
-+			pci_write_config_dword(dev,
-+					       PCI_BASE_ADDRESS_0 + (i * 4),
-+					       pci_resource_start(dev, i));
-+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-+	}
-+	return 0;
-+}
-+
-+#endif /* PCI power management */
-+
-+/* Old cp0 access macros deprecated in 2.4.19 */
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19))
-+#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
-+#endif
-+
-+/* Module refcount handled internally in 2.6.x */
-+#ifndef SET_MODULE_OWNER
-+#define SET_MODULE_OWNER(dev)		do {} while (0)
-+#define OLD_MOD_INC_USE_COUNT		MOD_INC_USE_COUNT
-+#define OLD_MOD_DEC_USE_COUNT		MOD_DEC_USE_COUNT
-+#else
-+#define OLD_MOD_INC_USE_COUNT		do {} while (0)
-+#define OLD_MOD_DEC_USE_COUNT		do {} while (0)
-+#endif
-+
-+#ifndef SET_NETDEV_DEV
-+#define SET_NETDEV_DEV(net, pdev)	do {} while (0)
-+#endif
-+
-+#ifndef HAVE_FREE_NETDEV
-+#define free_netdev(dev)		kfree(dev)
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
-+/* struct packet_type redefined in 2.6.x */
-+#define af_packet_priv			data
-+#endif
-+
-+#endif /* _linuxver_h_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/mipsinc.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/mipsinc.h
---- linux-2.6.16/arch/mips/bcm947xx/include/mipsinc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/mipsinc.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,552 @@
-+/*
-+ * HND Run Time Environment for standalone MIPS programs.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef	_MISPINC_H
-+#define _MISPINC_H
-+
-+
-+/* MIPS defines */
-+
-+#ifdef	_LANGUAGE_ASSEMBLY
-+
-+/*
-+ * Symbolic register names for 32 bit ABI
-+ */
-+#define zero	$0	/* wired zero */
-+#define AT	$1	/* assembler temp - uppercase because of ".set at" */
-+#define v0	$2	/* return value */
-+#define v1	$3
-+#define a0	$4	/* argument registers */
-+#define a1	$5
-+#define a2	$6
-+#define a3	$7
-+#define t0	$8	/* caller saved */
-+#define t1	$9
-+#define t2	$10
-+#define t3	$11
-+#define t4	$12
-+#define t5	$13
-+#define t6	$14
-+#define t7	$15
-+#define s0	$16	/* callee saved */
-+#define s1	$17
-+#define s2	$18
-+#define s3	$19
-+#define s4	$20
-+#define s5	$21
-+#define s6	$22
-+#define s7	$23
-+#define t8	$24	/* caller saved */
-+#define t9	$25
-+#define jp	$25	/* PIC jump register */
-+#define k0	$26	/* kernel scratch */
-+#define k1	$27
-+#define gp	$28	/* global pointer */
-+#define sp	$29	/* stack pointer */
-+#define fp	$30	/* frame pointer */
-+#define s8	$30	/* same like fp! */
-+#define ra	$31	/* return address */
-+
-+
-+/*
-+ * CP0 Registers 
-+ */
-+
-+#define C0_INX		$0
-+#define C0_RAND		$1
-+#define C0_TLBLO0	$2
-+#define C0_TLBLO	C0_TLBLO0
-+#define C0_TLBLO1	$3
-+#define C0_CTEXT	$4
-+#define C0_PGMASK	$5
-+#define C0_WIRED	$6
-+#define C0_BADVADDR	$8
-+#define C0_COUNT 	$9
-+#define C0_TLBHI	$10
-+#define C0_COMPARE	$11
-+#define C0_SR		$12
-+#define C0_STATUS	C0_SR
-+#define C0_CAUSE	$13
-+#define C0_EPC		$14
-+#define C0_PRID		$15
-+#define C0_CONFIG	$16
-+#define C0_LLADDR	$17
-+#define C0_WATCHLO	$18
-+#define C0_WATCHHI	$19
-+#define C0_XCTEXT	$20
-+#define C0_DIAGNOSTIC	$22
-+#define C0_BROADCOM	C0_DIAGNOSTIC
-+#define	C0_PERFORMANCE	$25
-+#define C0_ECC		$26
-+#define C0_CACHEERR	$27
-+#define C0_TAGLO	$28
-+#define C0_TAGHI	$29
-+#define C0_ERREPC	$30
-+#define C0_DESAVE	$31
-+
-+/*
-+ * LEAF - declare leaf routine
-+ */
-+#define LEAF(symbol)				\
-+		.globl	symbol;			\
-+		.align	2;			\
-+		.type	symbol,@function;	\
-+		.ent	symbol,0;		\
-+symbol:		.frame	sp,0,ra
-+
-+/*
-+ * END - mark end of function
-+ */
-+#define END(function)				\
-+		.end	function;		\
-+		.size	function,.-function
-+
-+#define _ULCAST_
-+
-+#else
-+
-+/*
-+ * The following macros are especially useful for __asm__
-+ * inline assembler.
-+ */
-+#ifndef __STR
-+#define __STR(x) #x
-+#endif
-+#ifndef STR
-+#define STR(x) __STR(x)
-+#endif
-+
-+#define _ULCAST_ (unsigned long)
-+
-+
-+/*
-+ * CP0 Registers 
-+ */
-+
-+#define C0_INX		0		/* CP0: TLB Index */
-+#define C0_RAND		1		/* CP0: TLB Random */
-+#define C0_TLBLO0	2		/* CP0: TLB EntryLo0 */
-+#define C0_TLBLO	C0_TLBLO0	/* CP0: TLB EntryLo0 */
-+#define C0_TLBLO1	3		/* CP0: TLB EntryLo1 */
-+#define C0_CTEXT	4		/* CP0: Context */
-+#define C0_PGMASK	5		/* CP0: TLB PageMask */
-+#define C0_WIRED	6		/* CP0: TLB Wired */
-+#define C0_BADVADDR	8		/* CP0: Bad Virtual Address */
-+#define C0_COUNT 	9		/* CP0: Count */
-+#define C0_TLBHI	10		/* CP0: TLB EntryHi */
-+#define C0_COMPARE	11		/* CP0: Compare */
-+#define C0_SR		12		/* CP0: Processor Status */
-+#define C0_STATUS	C0_SR		/* CP0: Processor Status */
-+#define C0_CAUSE	13		/* CP0: Exception Cause */
-+#define C0_EPC		14		/* CP0: Exception PC */
-+#define C0_PRID		15		/* CP0: Processor Revision Indentifier */
-+#define C0_CONFIG	16		/* CP0: Config */
-+#define C0_LLADDR	17		/* CP0: LLAddr */
-+#define C0_WATCHLO	18		/* CP0: WatchpointLo */
-+#define C0_WATCHHI	19		/* CP0: WatchpointHi */
-+#define C0_XCTEXT	20		/* CP0: XContext */
-+#define C0_DIAGNOSTIC	22		/* CP0: Diagnostic */
-+#define C0_BROADCOM	C0_DIAGNOSTIC	/* CP0: Broadcom Register */
-+#define	C0_PERFORMANCE	25		/* CP0: Performance Counter/Control Registers */
-+#define C0_ECC		26		/* CP0: ECC */
-+#define C0_CACHEERR	27		/* CP0: CacheErr */
-+#define C0_TAGLO	28		/* CP0: TagLo */
-+#define C0_TAGHI	29		/* CP0: TagHi */
-+#define C0_ERREPC	30		/* CP0: ErrorEPC */
-+#define C0_DESAVE	31		/* CP0: DebugSave */
-+
-+#endif	/* _LANGUAGE_ASSEMBLY */
-+
-+/*
-+ * Memory segments (32bit kernel mode addresses)
-+ */
-+#undef KUSEG
-+#undef KSEG0
-+#undef KSEG1
-+#undef KSEG2
-+#undef KSEG3
-+#define KUSEG		0x00000000
-+#define KSEG0		0x80000000
-+#define KSEG1		0xa0000000
-+#define KSEG2		0xc0000000
-+#define KSEG3		0xe0000000
-+#define PHYSADDR_MASK	0x1fffffff
-+
-+/*
-+ * Map an address to a certain kernel segment
-+ */
-+#undef PHYSADDR
-+#undef KSEG0ADDR
-+#undef KSEG1ADDR
-+#undef KSEG2ADDR
-+#undef KSEG3ADDR
-+
-+#define PHYSADDR(a)	(_ULCAST_(a) & PHYSADDR_MASK)
-+#define KSEG0ADDR(a)	((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0)
-+#define KSEG1ADDR(a)	((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1)
-+#define KSEG2ADDR(a)	((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2)
-+#define KSEG3ADDR(a)	((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3)
-+
-+
-+#ifndef	Index_Invalidate_I
-+/*
-+ * Cache Operations
-+ */
-+#define Index_Invalidate_I	0x00
-+#define Index_Writeback_Inv_D	0x01
-+#define Index_Invalidate_SI	0x02
-+#define Index_Writeback_Inv_SD	0x03
-+#define Index_Load_Tag_I	0x04
-+#define Index_Load_Tag_D	0x05
-+#define Index_Load_Tag_SI	0x06
-+#define Index_Load_Tag_SD	0x07
-+#define Index_Store_Tag_I	0x08
-+#define Index_Store_Tag_D	0x09
-+#define Index_Store_Tag_SI	0x0A
-+#define Index_Store_Tag_SD	0x0B
-+#define Create_Dirty_Excl_D	0x0d
-+#define Create_Dirty_Excl_SD	0x0f
-+#define Hit_Invalidate_I	0x10
-+#define Hit_Invalidate_D	0x11
-+#define Hit_Invalidate_SI	0x12
-+#define Hit_Invalidate_SD	0x13
-+#define Fill_I			0x14
-+#define Hit_Writeback_Inv_D	0x15
-+					/* 0x16 is unused */
-+#define Hit_Writeback_Inv_SD	0x17
-+#define R5K_Page_Invalidate_S	0x17
-+#define Hit_Writeback_I		0x18
-+#define Hit_Writeback_D		0x19
-+					/* 0x1a is unused */
-+#define Hit_Writeback_SD	0x1b
-+					/* 0x1c is unused */
-+					/* 0x1e is unused */
-+#define Hit_Set_Virtual_SI	0x1e
-+#define Hit_Set_Virtual_SD	0x1f
-+#endif
-+
-+
-+/*
-+ * R4x00 interrupt enable / cause bits
-+ */
-+#define IE_SW0			(_ULCAST_(1) <<  8)
-+#define IE_SW1			(_ULCAST_(1) <<  9)
-+#define IE_IRQ0			(_ULCAST_(1) << 10)
-+#define IE_IRQ1			(_ULCAST_(1) << 11)
-+#define IE_IRQ2			(_ULCAST_(1) << 12)
-+#define IE_IRQ3			(_ULCAST_(1) << 13)
-+#define IE_IRQ4			(_ULCAST_(1) << 14)
-+#define IE_IRQ5			(_ULCAST_(1) << 15)
-+
-+#ifndef	ST0_UM
-+/*
-+ * Bitfields in the mips32 cp0 status register
-+ */
-+#define ST0_IE			0x00000001
-+#define ST0_EXL			0x00000002
-+#define ST0_ERL			0x00000004
-+#define ST0_UM			0x00000010
-+#define ST0_SWINT0		0x00000100
-+#define ST0_SWINT1		0x00000200
-+#define ST0_HWINT0		0x00000400
-+#define ST0_HWINT1		0x00000800
-+#define ST0_HWINT2		0x00001000
-+#define ST0_HWINT3		0x00002000
-+#define ST0_HWINT4		0x00004000
-+#define ST0_HWINT5		0x00008000
-+#define ST0_IM			0x0000ff00
-+#define ST0_NMI			0x00080000
-+#define ST0_SR			0x00100000
-+#define ST0_TS			0x00200000
-+#define ST0_BEV			0x00400000
-+#define ST0_RE			0x02000000
-+#define ST0_RP			0x08000000
-+#define ST0_CU			0xf0000000
-+#define ST0_CU0			0x10000000
-+#define ST0_CU1			0x20000000
-+#define ST0_CU2			0x40000000
-+#define ST0_CU3			0x80000000
-+#endif
-+
-+
-+/*
-+ * Bitfields in the mips32 cp0 cause register
-+ */
-+#define C_EXC			0x0000007c
-+#define C_EXC_SHIFT		2
-+#define C_INT			0x0000ff00
-+#define C_INT_SHIFT		8
-+#define C_SW0			(_ULCAST_(1) <<  8)
-+#define C_SW1			(_ULCAST_(1) <<  9)
-+#define C_IRQ0			(_ULCAST_(1) << 10)
-+#define C_IRQ1			(_ULCAST_(1) << 11)
-+#define C_IRQ2			(_ULCAST_(1) << 12)
-+#define C_IRQ3			(_ULCAST_(1) << 13)
-+#define C_IRQ4			(_ULCAST_(1) << 14)
-+#define C_IRQ5			(_ULCAST_(1) << 15)
-+#define C_WP			0x00400000
-+#define C_IV			0x00800000
-+#define C_CE			0x30000000
-+#define C_CE_SHIFT		28
-+#define C_BD			0x80000000
-+
-+/* Values in C_EXC */
-+#define EXC_INT			0
-+#define EXC_TLBM		1
-+#define EXC_TLBL		2
-+#define EXC_TLBS		3
-+#define EXC_AEL			4
-+#define EXC_AES			5
-+#define EXC_IBE			6
-+#define EXC_DBE			7
-+#define EXC_SYS			8
-+#define EXC_BPT			9
-+#define EXC_RI			10
-+#define EXC_CU			11
-+#define EXC_OV			12
-+#define EXC_TR			13
-+#define EXC_WATCH		23
-+#define EXC_MCHK		24
-+
-+
-+/*
-+ * Bits in the cp0 config register.
-+ */
-+#define CONF_CM_CACHABLE_NO_WA		0
-+#define CONF_CM_CACHABLE_WA		1
-+#define CONF_CM_UNCACHED		2
-+#define CONF_CM_CACHABLE_NONCOHERENT	3
-+#define CONF_CM_CACHABLE_CE		4
-+#define CONF_CM_CACHABLE_COW		5
-+#define CONF_CM_CACHABLE_CUW		6
-+#define CONF_CM_CACHABLE_ACCELERATED	7
-+#define CONF_CM_CMASK			7
-+#define CONF_CU				(_ULCAST_(1) <<  3)
-+#define CONF_DB				(_ULCAST_(1) <<  4)
-+#define CONF_IB				(_ULCAST_(1) <<  5)
-+#define CONF_SE				(_ULCAST_(1) << 12)
-+#define CONF_SC				(_ULCAST_(1) << 17)
-+#define CONF_AC				(_ULCAST_(1) << 23)
-+#define CONF_HALT			(_ULCAST_(1) << 25)
-+
-+
-+/*
-+ * Bits in the cp0 config register select 1.
-+ */
-+#define CONF1_FP		0x00000001	/* FPU present */
-+#define CONF1_EP		0x00000002	/* EJTAG present */
-+#define CONF1_CA		0x00000004	/* mips16 implemented */
-+#define CONF1_WR		0x00000008	/* Watch registers present */
-+#define CONF1_PC		0x00000010	/* Performance counters present */
-+#define CONF1_DA_SHIFT		7		/* D$ associativity */
-+#define CONF1_DA_MASK		0x00000380
-+#define CONF1_DA_BASE		1
-+#define CONF1_DL_SHIFT		10		/* D$ line size */
-+#define CONF1_DL_MASK		0x00001c00
-+#define CONF1_DL_BASE		2
-+#define CONF1_DS_SHIFT		13		/* D$ sets/way */
-+#define CONF1_DS_MASK		0x0000e000
-+#define CONF1_DS_BASE		64
-+#define CONF1_IA_SHIFT		16		/* I$ associativity */
-+#define CONF1_IA_MASK		0x00070000
-+#define CONF1_IA_BASE		1
-+#define CONF1_IL_SHIFT		19		/* I$ line size */
-+#define CONF1_IL_MASK		0x00380000
-+#define CONF1_IL_BASE		2
-+#define CONF1_IS_SHIFT		22		/* Instruction cache sets/way */
-+#define CONF1_IS_MASK		0x01c00000
-+#define CONF1_IS_BASE		64
-+#define CONF1_MS_MASK		0x7e000000	/* Number of tlb entries */
-+#define CONF1_MS_SHIFT		25
-+
-+/* PRID register */
-+#define PRID_COPT_MASK		0xff000000
-+#define PRID_COMP_MASK		0x00ff0000
-+#define PRID_IMP_MASK		0x0000ff00
-+#define PRID_REV_MASK		0x000000ff
-+
-+#define PRID_COMP_LEGACY	0x000000
-+#define PRID_COMP_MIPS		0x010000
-+#define PRID_COMP_BROADCOM	0x020000
-+#define PRID_COMP_ALCHEMY	0x030000
-+#define PRID_COMP_SIBYTE	0x040000
-+#define PRID_IMP_BCM4710	0x4000
-+#define PRID_IMP_BCM3302	0x9000
-+#define PRID_IMP_BCM3303	0x9100
-+
-+#define PRID_IMP_UNKNOWN	0xff00
-+
-+#define BCM330X(id) \
-+	(((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \
-+	|| ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
-+
-+/* Bits in C0_BROADCOM */
-+#define BRCM_PFC_AVAIL		0x20000000	/* PFC is available */
-+#define BRCM_DC_ENABLE		0x40000000	/* Enable Data $ */
-+#define BRCM_IC_ENABLE		0x80000000	/* Enable Instruction $ */
-+#define BRCM_PFC_ENABLE		0x00400000	/* Obsolete? Enable PFC (at least on 4310) */
-+
-+/* PreFetch Cache aka Read Ahead Cache */
-+
-+#define PFC_CR0			0xff400000	/* control reg 0 */
-+#define PFC_CR1			0xff400004	/* control reg 1 */
-+
-+/* PFC operations */
-+#define PFC_I			0x00000001	/* Enable PFC use for instructions */
-+#define PFC_D			0x00000002	/* Enable PFC use for data */
-+#define PFC_PFI			0x00000004	/* Enable seq. prefetch for instructions */
-+#define PFC_PFD			0x00000008	/* Enable seq. prefetch for data */
-+#define PFC_CINV		0x00000010	/* Enable selective (i/d) cacheop flushing */
-+#define PFC_NCH			0x00000020	/* Disable flushing based on cacheops */
-+#define PFC_DPF			0x00000040	/* Enable directional prefetching */
-+#define PFC_FLUSH		0x00000100	/* Flush the PFC */
-+#define PFC_BRR			0x40000000	/* Bus error indication */
-+#define PFC_PWR			0x80000000	/* Disable power saving (clock gating) */
-+
-+/* Handy defaults */
-+#define PFC_DISABLED		0
-+#define PFC_AUTO			0xffffffff	/* auto select the default mode */
-+#define PFC_INST		(PFC_I | PFC_PFI | PFC_CINV)
-+#define PFC_INST_NOPF		(PFC_I | PFC_CINV)
-+#define PFC_DATA		(PFC_D | PFC_PFD | PFC_CINV)
-+#define PFC_DATA_NOPF		(PFC_D | PFC_CINV)
-+#define PFC_I_AND_D		(PFC_INST | PFC_DATA)
-+#define PFC_I_AND_D_NOPF	(PFC_INST_NOPF | PFC_DATA_NOPF)
-+
-+
-+/* 
-+ * These are the UART port assignments, expressed as offsets from the base
-+ * register.  These assignments should hold for any serial port based on
-+ * a 8250, 16450, or 16550(A).
-+ */
-+
-+#define UART_RX		0	/* In:  Receive buffer (DLAB=0) */
-+#define UART_TX		0	/* Out: Transmit buffer (DLAB=0) */
-+#define UART_DLL	0	/* Out: Divisor Latch Low (DLAB=1) */
-+#define UART_DLM	1	/* Out: Divisor Latch High (DLAB=1) */
-+#define UART_LCR	3	/* Out: Line Control Register */
-+#define UART_MCR	4	/* Out: Modem Control Register */
-+#define UART_LSR	5	/* In:  Line Status Register */
-+#define UART_MSR	6	/* In:  Modem Status Register */
-+#define UART_SCR	7	/* I/O: Scratch Register */
-+#define UART_LCR_DLAB	0x80	/* Divisor latch access bit */
-+#define UART_LCR_WLEN8	0x03	/* Wordlength: 8 bits */
-+#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
-+#define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
-+#define UART_LSR_RXRDY	0x01	/* Receiver ready */
-+
-+
-+#ifndef	_LANGUAGE_ASSEMBLY
-+
-+/*
-+ * Macros to access the system control coprocessor
-+ */
-+
-+#define MFC0(source, sel)					\
-+({								\
-+	int __res;						\
-+	__asm__ __volatile__(					\
-+	".set\tnoreorder\n\t"					\
-+	".set\tnoat\n\t"					\
-+	".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t"	\
-+	"move\t%0,$1\n\t"					\
-+	".set\tat\n\t"						\
-+	".set\treorder"						\
-+	:"=r" (__res)						\
-+	:							\
-+	:"$1");							\
-+	__res;							\
-+})
-+
-+#define MTC0(source, sel, value)				\
-+do {								\
-+	__asm__ __volatile__(					\
-+	".set\tnoreorder\n\t"					\
-+	".set\tnoat\n\t"					\
-+	"move\t$1,%z0\n\t"					\
-+	".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t"	\
-+	".set\tat\n\t"						\
-+	".set\treorder"						\
-+	:							\
-+	:"jr" (value)						\
-+	:"$1");							\
-+} while (0)
-+
-+#define get_c0_count()						\
-+({								\
-+	int __res;						\
-+	__asm__ __volatile__(					\
-+	".set\tnoreorder\n\t"					\
-+	".set\tnoat\n\t"					\
-+	"mfc0\t%0,$9\n\t"					\
-+	".set\tat\n\t"						\
-+	".set\treorder"						\
-+	:"=r" (__res));						\
-+	__res;							\
-+})
-+
-+static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize)
-+{
-+	uint lsz, sets, ways;
-+
-+	/* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
-+	if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT)))
-+		lsz = CONF1_IL_BASE << lsz;
-+	sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT);
-+	ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT);
-+	*size = lsz * sets * ways;
-+	*lsize = lsz;
-+}
-+
-+static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize)
-+{
-+	uint lsz, sets, ways;
-+
-+	/* Data Cache Size = Associativity * Line Size * Sets Per Way */
-+	if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT)))
-+		lsz = CONF1_DL_BASE << lsz;
-+	sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT);
-+	ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT);
-+	*size = lsz * sets * ways;
-+	*lsize = lsz;
-+}
-+
-+#define cache_op(base, op)			\
-+	__asm__ __volatile__("			\
-+		.set noreorder;			\
-+		.set mips3;			\
-+		cache %1, (%0);			\
-+		.set mips0;			\
-+		.set reorder"			\
-+		:				\
-+		: "r" (base),			\
-+		  "i" (op));
-+
-+#define cache_unroll4(base, delta, op)		\
-+	__asm__ __volatile__("			\
-+		.set noreorder;			\
-+		.set mips3;			\
-+		cache %1,0(%0);			\
-+		cache %1,delta(%0);		\
-+		cache %1,(2 * delta)(%0);	\
-+		cache %1,(3 * delta)(%0);	\
-+		.set mips0;			\
-+		.set reorder"			\
-+		:				\
-+		: "r" (base),			\
-+		  "i" (op));
-+
-+#endif /* !_LANGUAGE_ASSEMBLY */
-+
-+#endif	/* _MISPINC_H */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/osl.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/osl.h
---- linux-2.6.16/arch/mips/bcm947xx/include/osl.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/osl.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,42 @@
-+/*
-+ * OS Abstraction Layer
-+ * 
-+ * Copyright 2005, Broadcom Corporation      
-+ * All Rights Reserved.      
-+ *       
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
-+ * $Id$
-+ */
-+
-+#ifndef _osl_h_
-+#define _osl_h_
-+
-+/* osl handle type forward declaration */
-+typedef struct os_handle osl_t;
-+
-+#if defined(linux)
-+#include <linux_osl.h>
-+#elif defined(NDIS)
-+#include <ndis_osl.h>
-+#elif defined(_CFE_)
-+#include <cfe_osl.h>
-+#elif defined(_HNDRTE_)
-+#include <hndrte_osl.h>
-+#elif defined(_MINOSL_)
-+#include <min_osl.h>
-+#elif PMON
-+#include <pmon_osl.h>
-+#elif defined(MACOSX)
-+#include <macosx_osl.h>
-+#else
-+#error "Unsupported OSL requested"
-+#endif
-+
-+/* handy */
-+#define	SET_REG(r, mask, val)	W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
-+#define	MAXPRIO		7	/* 0-7 */
-+
-+#endif	/* _osl_h_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/pcicfg.h
---- linux-2.6.16/arch/mips/bcm947xx/include/pcicfg.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/pcicfg.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,398 @@
-+/*
-+ * pcicfg.h: PCI configuration  constants and structures.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef	_h_pci_
-+#define	_h_pci_
-+
-+/* The following inside ifndef's so we don't collide with NTDDK.H */
-+#ifndef PCI_MAX_BUS
-+#define PCI_MAX_BUS		0x100
-+#endif
-+#ifndef PCI_MAX_DEVICES
-+#define PCI_MAX_DEVICES		0x20
-+#endif
-+#ifndef PCI_MAX_FUNCTION
-+#define PCI_MAX_FUNCTION	0x8
-+#endif
-+
-+#ifndef PCI_INVALID_VENDORID
-+#define PCI_INVALID_VENDORID	0xffff
-+#endif
-+#ifndef PCI_INVALID_DEVICEID
-+#define PCI_INVALID_DEVICEID	0xffff
-+#endif
-+
-+
-+/* Convert between bus-slot-function-register and config addresses */
-+
-+#define	PCICFG_BUS_SHIFT	16	/* Bus shift */
-+#define	PCICFG_SLOT_SHIFT	11	/* Slot shift */
-+#define	PCICFG_FUN_SHIFT	8	/* Function shift */
-+#define	PCICFG_OFF_SHIFT	0	/* Register shift */
-+
-+#define	PCICFG_BUS_MASK		0xff	/* Bus mask */
-+#define	PCICFG_SLOT_MASK	0x1f	/* Slot mask */
-+#define	PCICFG_FUN_MASK		7	/* Function mask */
-+#define	PCICFG_OFF_MASK		0xff	/* Bus mask */
-+
-+#define	PCI_CONFIG_ADDR(b, s, f, o)					\
-+		((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT)		\
-+		 | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT)	\
-+		 | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT)	\
-+		 | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT))
-+
-+#define	PCI_CONFIG_BUS(a)	(((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK)
-+#define	PCI_CONFIG_SLOT(a)	(((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK)
-+#define	PCI_CONFIG_FUN(a)	(((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK)
-+#define	PCI_CONFIG_OFF(a)	(((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK)
-+
-+/* The actual config space */
-+
-+#define	PCI_BAR_MAX		6
-+
-+#define	PCI_ROM_BAR		8
-+
-+#define	PCR_RSVDA_MAX		2
-+
-+/* pci config status reg has a bit to indicate that capability ptr is present*/
-+
-+#define PCI_CAPPTR_PRESENT	0x0010
-+
-+typedef struct _pci_config_regs {
-+    unsigned short	vendor;
-+    unsigned short	device;
-+    unsigned short	command;
-+    unsigned short	status;
-+    unsigned char	rev_id;
-+    unsigned char	prog_if;
-+    unsigned char	sub_class;
-+    unsigned char	base_class;
-+    unsigned char	cache_line_size;
-+    unsigned char	latency_timer;
-+    unsigned char	header_type;
-+    unsigned char	bist;
-+    unsigned long	base[PCI_BAR_MAX];
-+    unsigned long	cardbus_cis;
-+    unsigned short	subsys_vendor;
-+    unsigned short	subsys_id;
-+    unsigned long	baserom;
-+    unsigned long	rsvd_a[PCR_RSVDA_MAX];
-+    unsigned char	int_line;
-+    unsigned char	int_pin;
-+    unsigned char	min_gnt;
-+    unsigned char	max_lat;
-+    unsigned char	dev_dep[192];
-+} pci_config_regs;
-+
-+#define	SZPCR		(sizeof (pci_config_regs))
-+#define	MINSZPCR	64		/* offsetof (dev_dep[0] */
-+
-+/* A structure for the config registers is nice, but in most
-+ * systems the config space is not memory mapped, so we need
-+ * filed offsetts. :-(
-+ */
-+#define	PCI_CFG_VID		0
-+#define	PCI_CFG_DID		2
-+#define	PCI_CFG_CMD		4
-+#define	PCI_CFG_STAT		6
-+#define	PCI_CFG_REV		8
-+#define	PCI_CFG_PROGIF		9
-+#define	PCI_CFG_SUBCL		0xa
-+#define	PCI_CFG_BASECL		0xb
-+#define	PCI_CFG_CLSZ		0xc
-+#define	PCI_CFG_LATTIM		0xd
-+#define	PCI_CFG_HDR		0xe
-+#define	PCI_CFG_BIST		0xf
-+#define	PCI_CFG_BAR0		0x10
-+#define	PCI_CFG_BAR1		0x14
-+#define	PCI_CFG_BAR2		0x18
-+#define	PCI_CFG_BAR3		0x1c
-+#define	PCI_CFG_BAR4		0x20
-+#define	PCI_CFG_BAR5		0x24
-+#define	PCI_CFG_CIS		0x28
-+#define	PCI_CFG_SVID		0x2c
-+#define	PCI_CFG_SSID		0x2e
-+#define	PCI_CFG_ROMBAR		0x30
-+#define PCI_CFG_CAPPTR		0x34
-+#define	PCI_CFG_INT		0x3c
-+#define	PCI_CFG_PIN		0x3d
-+#define	PCI_CFG_MINGNT		0x3e
-+#define	PCI_CFG_MAXLAT		0x3f
-+
-+/* Classes and subclasses */
-+
-+typedef enum {
-+    PCI_CLASS_OLD = 0,
-+    PCI_CLASS_DASDI,
-+    PCI_CLASS_NET,
-+    PCI_CLASS_DISPLAY,
-+    PCI_CLASS_MMEDIA,
-+    PCI_CLASS_MEMORY,
-+    PCI_CLASS_BRIDGE,
-+    PCI_CLASS_COMM,
-+    PCI_CLASS_BASE,
-+    PCI_CLASS_INPUT,
-+    PCI_CLASS_DOCK,
-+    PCI_CLASS_CPU,
-+    PCI_CLASS_SERIAL,
-+    PCI_CLASS_INTELLIGENT = 0xe,
-+    PCI_CLASS_SATELLITE,
-+    PCI_CLASS_CRYPT,
-+    PCI_CLASS_DSP,
-+    PCI_CLASS_MAX
-+} pci_classes;
-+
-+typedef enum {
-+    PCI_DASDI_SCSI,
-+    PCI_DASDI_IDE,
-+    PCI_DASDI_FLOPPY,
-+    PCI_DASDI_IPI,
-+    PCI_DASDI_RAID,
-+    PCI_DASDI_OTHER = 0x80
-+} pci_dasdi_subclasses;
-+
-+typedef enum {
-+    PCI_NET_ETHER,
-+    PCI_NET_TOKEN,
-+    PCI_NET_FDDI,
-+    PCI_NET_ATM,
-+    PCI_NET_OTHER = 0x80
-+} pci_net_subclasses;
-+
-+typedef enum {
-+    PCI_DISPLAY_VGA,
-+    PCI_DISPLAY_XGA,
-+    PCI_DISPLAY_3D,
-+    PCI_DISPLAY_OTHER = 0x80
-+} pci_display_subclasses;
-+
-+typedef enum {
-+    PCI_MMEDIA_VIDEO,
-+    PCI_MMEDIA_AUDIO,
-+    PCI_MMEDIA_PHONE,
-+    PCI_MEDIA_OTHER = 0x80
-+} pci_mmedia_subclasses;
-+
-+typedef enum {
-+    PCI_MEMORY_RAM,
-+    PCI_MEMORY_FLASH,
-+    PCI_MEMORY_OTHER = 0x80
-+} pci_memory_subclasses;
-+
-+typedef enum {
-+    PCI_BRIDGE_HOST,
-+    PCI_BRIDGE_ISA,
-+    PCI_BRIDGE_EISA,
-+    PCI_BRIDGE_MC,
-+    PCI_BRIDGE_PCI,
-+    PCI_BRIDGE_PCMCIA,
-+    PCI_BRIDGE_NUBUS,
-+    PCI_BRIDGE_CARDBUS,
-+    PCI_BRIDGE_RACEWAY,
-+    PCI_BRIDGE_OTHER = 0x80
-+} pci_bridge_subclasses;
-+
-+typedef enum {
-+    PCI_COMM_UART,
-+    PCI_COMM_PARALLEL,
-+    PCI_COMM_MULTIUART,
-+    PCI_COMM_MODEM,
-+    PCI_COMM_OTHER = 0x80
-+} pci_comm_subclasses;
-+
-+typedef enum {
-+    PCI_BASE_PIC,
-+    PCI_BASE_DMA,
-+    PCI_BASE_TIMER,
-+    PCI_BASE_RTC,
-+    PCI_BASE_PCI_HOTPLUG,
-+    PCI_BASE_OTHER = 0x80
-+} pci_base_subclasses;
-+
-+typedef enum {
-+    PCI_INPUT_KBD,
-+    PCI_INPUT_PEN,
-+    PCI_INPUT_MOUSE,
-+    PCI_INPUT_SCANNER,
-+    PCI_INPUT_GAMEPORT,
-+    PCI_INPUT_OTHER = 0x80
-+} pci_input_subclasses;
-+
-+typedef enum {
-+    PCI_DOCK_GENERIC,
-+    PCI_DOCK_OTHER = 0x80
-+} pci_dock_subclasses;
-+
-+typedef enum {
-+    PCI_CPU_386,
-+    PCI_CPU_486,
-+    PCI_CPU_PENTIUM,
-+    PCI_CPU_ALPHA = 0x10,
-+    PCI_CPU_POWERPC = 0x20,
-+    PCI_CPU_MIPS = 0x30,
-+    PCI_CPU_COPROC = 0x40,
-+    PCI_CPU_OTHER = 0x80
-+} pci_cpu_subclasses;
-+
-+typedef enum {
-+    PCI_SERIAL_IEEE1394,
-+    PCI_SERIAL_ACCESS,
-+    PCI_SERIAL_SSA,
-+    PCI_SERIAL_USB,
-+    PCI_SERIAL_FIBER,
-+    PCI_SERIAL_SMBUS,
-+    PCI_SERIAL_OTHER = 0x80
-+} pci_serial_subclasses;
-+
-+typedef enum {
-+    PCI_INTELLIGENT_I2O,
-+} pci_intelligent_subclasses;
-+
-+typedef enum {
-+    PCI_SATELLITE_TV,
-+    PCI_SATELLITE_AUDIO,
-+    PCI_SATELLITE_VOICE,
-+    PCI_SATELLITE_DATA,
-+    PCI_SATELLITE_OTHER = 0x80
-+} pci_satellite_subclasses;
-+
-+typedef enum {
-+    PCI_CRYPT_NETWORK,
-+    PCI_CRYPT_ENTERTAINMENT,
-+    PCI_CRYPT_OTHER = 0x80
-+} pci_crypt_subclasses;
-+
-+typedef enum {
-+    PCI_DSP_DPIO,
-+    PCI_DSP_OTHER = 0x80
-+} pci_dsp_subclasses;
-+
-+/* Header types */
-+typedef enum {
-+	PCI_HEADER_NORMAL,
-+	PCI_HEADER_BRIDGE,
-+	PCI_HEADER_CARDBUS
-+} pci_header_types;
-+
-+
-+/* Overlay for a PCI-to-PCI bridge */
-+
-+#define	PPB_RSVDA_MAX		2
-+#define	PPB_RSVDD_MAX		8
-+
-+typedef struct _ppb_config_regs {
-+    unsigned short	vendor;
-+    unsigned short	device;
-+    unsigned short	command;
-+    unsigned short	status;
-+    unsigned char	rev_id;
-+    unsigned char	prog_if;
-+    unsigned char	sub_class;
-+    unsigned char	base_class;
-+    unsigned char	cache_line_size;
-+    unsigned char	latency_timer;
-+    unsigned char	header_type;
-+    unsigned char	bist;
-+    unsigned long	rsvd_a[PPB_RSVDA_MAX];
-+    unsigned char	prim_bus;
-+    unsigned char	sec_bus;
-+    unsigned char	sub_bus;
-+    unsigned char	sec_lat;
-+    unsigned char	io_base;
-+    unsigned char	io_lim;
-+    unsigned short	sec_status;
-+    unsigned short	mem_base;
-+    unsigned short	mem_lim;
-+    unsigned short	pf_mem_base;
-+    unsigned short	pf_mem_lim;
-+    unsigned long	pf_mem_base_hi;
-+    unsigned long	pf_mem_lim_hi;
-+    unsigned short	io_base_hi;
-+    unsigned short	io_lim_hi;
-+    unsigned short	subsys_vendor;
-+    unsigned short	subsys_id;
-+    unsigned long	rsvd_b;
-+    unsigned char	rsvd_c;
-+    unsigned char	int_pin;
-+    unsigned short	bridge_ctrl;
-+    unsigned char	chip_ctrl;
-+    unsigned char	diag_ctrl;
-+    unsigned short	arb_ctrl;
-+    unsigned long	rsvd_d[PPB_RSVDD_MAX];
-+    unsigned char	dev_dep[192];
-+} ppb_config_regs;
-+
-+
-+/* PCI CAPABILITY DEFINES */
-+#define PCI_CAP_POWERMGMTCAP_ID		0x01
-+#define PCI_CAP_MSICAP_ID		0x05
-+
-+/* Data structure to define the Message Signalled Interrupt facility 
-+ * Valid for PCI and PCIE configurations */
-+typedef struct _pciconfig_cap_msi {
-+	unsigned char capID;
-+	unsigned char nextptr;
-+	unsigned short msgctrl;
-+	unsigned int msgaddr;
-+} pciconfig_cap_msi;
-+
-+/* Data structure to define the Power managment facility
-+ * Valid for PCI and PCIE configurations */
-+typedef struct _pciconfig_cap_pwrmgmt {
-+	unsigned char capID;
-+	unsigned char nextptr;
-+	unsigned short pme_cap;
-+	unsigned short  pme_sts_ctrl; 
-+	unsigned char  pme_bridge_ext;
-+	unsigned char  data;
-+} pciconfig_cap_pwrmgmt;
-+
-+/* Everything below is BRCM HND proprietary */
-+
-+#define	PCI_BAR0_WIN		0x80	/* backplane addres space accessed by BAR0 */
-+#define	PCI_BAR1_WIN		0x84	/* backplane addres space accessed by BAR1 */
-+#define	PCI_SPROM_CONTROL	0x88	/* sprom property control */
-+#define	PCI_BAR1_CONTROL	0x8c	/* BAR1 region burst control */
-+#define	PCI_INT_STATUS		0x90	/* PCI and other cores interrupts */
-+#define	PCI_INT_MASK		0x94	/* mask of PCI and other cores interrupts */
-+#define PCI_TO_SB_MB		0x98	/* signal backplane interrupts */
-+#define PCI_BACKPLANE_ADDR	0xA0	/* address an arbitrary location on the system backplane */
-+#define PCI_BACKPLANE_DATA	0xA4	/* data at the location specified by above address register */
-+#define	PCI_GPIO_IN		0xb0	/* pci config space gpio input (>=rev3) */
-+#define	PCI_GPIO_OUT		0xb4	/* pci config space gpio output (>=rev3) */
-+#define	PCI_GPIO_OUTEN		0xb8	/* pci config space gpio output enable (>=rev3) */
-+
-+#define	PCI_BAR0_SPROM_OFFSET	(4 * 1024)	/* bar0 + 4K accesses external sprom */
-+#define	PCI_BAR0_PCIREGS_OFFSET	(6 * 1024)	/* bar0 + 6K accesses pci core registers */
-+
-+/* PCI_INT_STATUS */
-+#define	PCI_SBIM_STATUS_SERR	0x4	/* backplane SBErr interrupt status */
-+
-+/* PCI_INT_MASK */
-+#define	PCI_SBIM_SHIFT		8	/* backplane core interrupt mask bits offset */
-+#define	PCI_SBIM_MASK		0xff00	/* backplane core interrupt mask */
-+#define	PCI_SBIM_MASK_SERR	0x4	/* backplane SBErr interrupt mask */
-+
-+/* PCI_SPROM_CONTROL */
-+#define	SPROM_BLANK		0x04  	/* indicating a blank sprom */
-+#define SPROM_WRITEEN		0x10	/* sprom write enable */
-+#define SPROM_BOOTROM_WE	0x20	/* external bootrom write enable */
-+
-+#define	SPROM_SIZE		256	/* sprom size in 16-bit */
-+#define SPROM_CRC_RANGE		64	/* crc cover range in 16-bit */
-+
-+/* PCI_CFG_CMD_STAT */
-+#define PCI_CFG_CMD_STAT_TA	0x08000000	/* target abort status */
-+
-+#endif
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/proto/ethernet.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/proto/ethernet.h
---- linux-2.6.16/arch/mips/bcm947xx/include/proto/ethernet.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/proto/ethernet.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,145 @@
-+/*******************************************************************************
-+ * $Id$
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
-+ ******************************************************************************/
-+
-+#ifndef _NET_ETHERNET_H_	    /* use native BSD ethernet.h when available */
-+#define _NET_ETHERNET_H_
-+
-+#ifndef _TYPEDEFS_H_
-+#include "typedefs.h"
-+#endif
-+
-+#if defined(__GNUC__)
-+#define	PACKED	__attribute__((packed))
-+#else
-+#define	PACKED
-+#endif
-+
-+/*
-+ * The number of bytes in an ethernet (MAC) address.
-+ */
-+#define	ETHER_ADDR_LEN		6
-+
-+/*
-+ * The number of bytes in the type field.
-+ */
-+#define	ETHER_TYPE_LEN		2
-+
-+/*
-+ * The number of bytes in the trailing CRC field.
-+ */
-+#define	ETHER_CRC_LEN		4
-+
-+/*
-+ * The length of the combined header.
-+ */
-+#define	ETHER_HDR_LEN		(ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
-+
-+/*
-+ * The minimum packet length.
-+ */
-+#define	ETHER_MIN_LEN		64
-+
-+/*
-+ * The minimum packet user data length.
-+ */
-+#define	ETHER_MIN_DATA		46
-+
-+/*
-+ * The maximum packet length.
-+ */
-+#define	ETHER_MAX_LEN		1518
-+
-+/*
-+ * The maximum packet user data length.
-+ */
-+#define	ETHER_MAX_DATA		1500
-+
-+/*
-+ * Used to uniquely identify a 802.1q VLAN-tagged header.
-+ */
-+#define	VLAN_TAG			0x8100
-+
-+/*
-+ * Located after dest & src address in ether header.
-+ */
-+#define VLAN_FIELDS_OFFSET		(ETHER_ADDR_LEN * 2)
-+
-+/*
-+ * 4 bytes of vlan field info.
-+ */
-+#define VLAN_FIELDS_SIZE		4
-+
-+/* location of pri bits in 16-bit vlan fields */
-+#define VLAN_PRI_SHIFT			13
-+
-+/* 3 bits of priority */
-+#define VLAN_PRI_MASK			7
-+
-+/* 802.1X ethertype */
-+#define ETHER_TYPE_802_1X	0x888e
-+
-+/*
-+ * A macro to validate a length with
-+ */
-+#define	ETHER_IS_VALID_LEN(foo)	\
-+	((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
-+
-+
-+#ifndef __INCif_etherh     /* Quick and ugly hack for VxWorks */
-+/*
-+ * Structure of a 10Mb/s Ethernet header.
-+ */
-+struct	ether_header {
-+	uint8	ether_dhost[ETHER_ADDR_LEN];
-+	uint8	ether_shost[ETHER_ADDR_LEN];
-+	uint16	ether_type;
-+} PACKED ;
-+
-+/*
-+ * Structure of a 48-bit Ethernet address.
-+ */
-+struct	ether_addr {
-+	uint8 octet[ETHER_ADDR_LEN];
-+} PACKED ;
-+#endif
-+
-+/*
-+ * Takes a pointer, returns true if a 48-bit multicast address
-+ * (including broadcast, since it is all ones)
-+ */
-+#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
-+
-+/*
-+ * Takes a pointer, returns true if a 48-bit broadcast (all ones)
-+ */
-+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] &		\
-+			    ((uint8 *)(ea))[1] &		\
-+			    ((uint8 *)(ea))[2] &		\
-+			    ((uint8 *)(ea))[3] &		\
-+			    ((uint8 *)(ea))[4] &		\
-+			    ((uint8 *)(ea))[5]) == 0xff)
-+
-+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
-+
-+/*
-+ * Takes a pointer, returns true if a 48-bit null address (all zeros)
-+ */
-+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] |		\
-+			    ((uint8 *)(ea))[1] |		\
-+			    ((uint8 *)(ea))[2] |		\
-+			    ((uint8 *)(ea))[3] |		\
-+			    ((uint8 *)(ea))[4] |		\
-+			    ((uint8 *)(ea))[5]) == 0)
-+
-+#undef PACKED
-+
-+#endif /* _NET_ETHERNET_H_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/s5.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/s5.h
---- linux-2.6.16/arch/mips/bcm947xx/include/s5.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/s5.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,103 @@
-+#ifndef _S5_H_
-+#define _S5_H_
-+/*
-+ *   Copyright 2003, Broadcom Corporation
-+ *   All Rights Reserved.
-+ * 
-+ *   Broadcom Sentry5 (S5) BCM5365, 53xx, BCM58xx SOC Internal Core
-+ *   and MIPS3301 (R4K) System Address Space
-+ *
-+ *   This program is free software; you can redistribute it and/or
-+ *   modify it under the terms of the GNU General Public License as
-+ *   published by the Free Software Foundation, located in the file
-+ *   LICENSE.
-+ *
-+ *   $Id: s5.h,v 1.3 2003/06/10 18:54:51 jfd Exp $
-+ * 
-+ */
-+
-+/* BCM5365 Address map */
-+#define KSEG1ADDR(x)    ( (x) | 0xa0000000)
-+#define BCM5365_SDRAM		0x00000000 /* 0-128MB Physical SDRAM */
-+#define BCM5365_PCI_MEM		0x08000000 /* Host Mode PCI mem space (64MB) */
-+#define BCM5365_PCI_CFG		0x0c000000 /* Host Mode PCI cfg space (64MB) */
-+#define BCM5365_PCI_DMA		0x40000000 /* Client Mode PCI mem space (1GB)*/
-+#define	BCM5365_SDRAM_SWAPPED	0x10000000 /* Byteswapped Physical SDRAM */
-+#define BCM5365_ENUM		0x18000000 /* Beginning of core enum space */
-+
-+/* BCM5365 Core register space */
-+#define BCM5365_REG_CHIPC	0x18000000 /* Chipcommon  registers */
-+#define BCM5365_REG_EMAC0	0x18001000 /* Ethernet MAC0 core registers */
-+#define BCM5365_REG_IPSEC	0x18002000 /* BCM582x CryptoCore registers */
-+#define BCM5365_REG_USB		0x18003000 /* USB core registers */
-+#define BCM5365_REG_PCI		0x18004000 /* PCI core registers */
-+#define BCM5365_REG_MIPS33	0x18005000 /* MIPS core registers */
-+#define BCM5365_REG_MEMC	0x18006000 /* MEMC core registers */
-+#define BCM5365_REG_UARTS       (BCM5365_REG_CHIPC + 0x300) /* UART regs */
-+#define	BCM5365_EJTAG		0xff200000 /* MIPS EJTAG space (2M) */
-+
-+/* COM Ports 1/2 */
-+#define	BCM5365_UART		(BCM5365_REG_UARTS)
-+#define BCM5365_UART_COM2	(BCM5365_REG_UARTS + 0x00000100)
-+
-+/* Registers common to MIPS33 Core used in 5365 */
-+#define MIPS33_FLASH_REGION           0x1fc00000 /* Boot FLASH Region  */
-+#define MIPS33_EXTIF_REGION           0x1a000000 /* Chipcommon EXTIF region*/
-+#define BCM5365_EXTIF                 0x1b000000 /* MISC_CS */
-+#define MIPS33_FLASH_REGION_AUX       0x1c000000 /* FLASH Region 2*/
-+
-+/* Internal Core Sonics Backplane Devices */
-+#define INTERNAL_UART_COM1            BCM5365_UART
-+#define INTERNAL_UART_COM2            BCM5365_UART_COM2
-+#define SB_REG_CHIPC                  BCM5365_REG_CHIPC
-+#define SB_REG_ENET0                  BCM5365_REG_EMAC0
-+#define SB_REG_IPSEC                  BCM5365_REG_IPSEC
-+#define SB_REG_USB                    BCM5365_REG_USB
-+#define SB_REG_PCI                    BCM5365_REG_PCI
-+#define SB_REG_MIPS                   BCM5365_REG_MIPS33
-+#define SB_REG_MEMC                   BCM5365_REG_MEMC
-+#define SB_REG_MEMC_OFF               0x6000
-+#define SB_EXTIF_SPACE                MIPS33_EXTIF_REGION
-+#define SB_FLASH_SPACE                MIPS33_FLASH_REGION
-+
-+/*
-+ * XXX
-+ * 5365-specific backplane interrupt flag numbers.  This should be done
-+ * dynamically instead.
-+ */
-+#define	SBFLAG_PCI	0
-+#define	SBFLAG_ENET0	1
-+#define	SBFLAG_ILINE20	2
-+#define	SBFLAG_CODEC	3
-+#define	SBFLAG_USB	4
-+#define	SBFLAG_EXTIF	5
-+#define	SBFLAG_ENET1	6
-+
-+/* BCM95365 Local Bus devices */
-+#define BCM95365K_RESET_ADDR    	 BCM5365_EXTIF
-+#define BCM95365K_BOARDID_ADDR  	(BCM5365_EXTIF | 0x4000)
-+#define BCM95365K_DOC_ADDR      	(BCM5365_EXTIF | 0x6000)
-+#define BCM95365K_LED_ADDR      	(BCM5365_EXTIF | 0xc000)
-+#define BCM95365K_TOD_REG_BASE          (BCM95365K_NVRAM_ADDR | 0x1ff0)
-+#define BCM95365K_NVRAM_ADDR    	(BCM5365_EXTIF | 0xe000)
-+#define BCM95365K_NVRAM_SIZE             0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/
-+
-+/* Write to DLR2416 VFD Display character RAM */
-+#define LED_REG(x)      \
-+ (*(volatile unsigned char *) (KSEG1ADDR(BCM95365K_LED_ADDR) + (x)))
-+
-+#ifdef	CONFIG_VSIM
-+#define	BCM5365_TRACE(trval)        do { *((int *)0xa0002ff8) = (trval); \
-+                                       } while (0)
-+#else
-+#define	BCM5365_TRACE(trval)        do { *((unsigned char *)\
-+                                         KSEG1ADDR(BCM5365K_LED_ADDR)) = (trval); \
-+				    *((int *)0xa0002ff8) = (trval); } while (0)
-+#endif
-+
-+/* BCM9536R Local Bus devices */
-+#define BCM95365R_DOC_ADDR      	BCM5365_EXTIF
-+
-+
-+
-+#endif /*!_S5_H_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbchipc.h
---- linux-2.6.16/arch/mips/bcm947xx/include/sbchipc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbchipc.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,440 @@
-+/*
-+ * SiliconBackplane Chipcommon core hardware definitions.
-+ *
-+ * The chipcommon core provides chip identification, SB control,
-+ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
-+ * gpio interface, extbus, and support for serial and parallel flashes.
-+ *
-+ * $Id$
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ */
-+
-+#ifndef	_SBCHIPC_H
-+#define	_SBCHIPC_H
-+
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif	/* PAD */
-+
-+typedef volatile struct {
-+	uint32	chipid;			/* 0x0 */
-+	uint32	capabilities;
-+	uint32	corecontrol;		/* corerev >= 1 */
-+	uint32	bist;
-+
-+	/* OTP */
-+	uint32	otpstatus;		/* 0x10, corerev >= 10 */
-+	uint32	otpcontrol;
-+	uint32	otpprog;
-+	uint32	PAD;
-+
-+	/* Interrupt control */
-+	uint32	intstatus;		/* 0x20 */
-+	uint32	intmask;
-+	uint32	chipcontrol;		/* 0x28, rev >= 11 */
-+	uint32	chipstatus;		/* 0x2c, rev >= 11 */
-+
-+	/* Jtag Master */
-+	uint32	jtagcmd;		/* 0x30, rev >= 10 */
-+	uint32	jtagir;
-+	uint32	jtagdr;
-+	uint32	jtagctrl;
-+
-+	/* serial flash interface registers */
-+	uint32	flashcontrol;		/* 0x40 */
-+	uint32	flashaddress;
-+	uint32	flashdata;
-+	uint32	PAD[1];
-+
-+	/* Silicon backplane configuration broadcast control */
-+	uint32	broadcastaddress;	/* 0x50 */
-+	uint32	broadcastdata;
-+	uint32	PAD[2];
-+
-+	/* gpio - cleared only by power-on-reset */
-+	uint32	gpioin;			/* 0x60 */
-+	uint32	gpioout;
-+	uint32	gpioouten;
-+	uint32	gpiocontrol;
-+	uint32	gpiointpolarity;
-+	uint32	gpiointmask;
-+	uint32	PAD[2];
-+
-+	/* Watchdog timer */
-+	uint32	watchdog;		/* 0x80 */
-+	uint32	PAD[1];
-+
-+	/*GPIO based LED powersave registers corerev >= 16*/
-+	uint32  gpiotimerval;		/*0x88 */
-+	uint32  gpiotimeroutmask;
-+
-+	/* clock control */
-+	uint32	clockcontrol_n;		/* 0x90 */
-+	uint32	clockcontrol_sb;	/* aka m0 */
-+	uint32	clockcontrol_pci;	/* aka m1 */
-+	uint32	clockcontrol_m2;	/* mii/uart/mipsref */
-+	uint32	clockcontrol_mips;	/* aka m3 */
-+	uint32	clkdiv;			/* corerev >= 3 */
-+	uint32	PAD[2];
-+
-+	/* pll delay registers (corerev >= 4) */
-+	uint32	pll_on_delay;		/* 0xb0 */
-+	uint32	fref_sel_delay;
-+	uint32	slow_clk_ctl;		/* 5 < corerev < 10 */
-+	uint32	PAD[1];
-+
-+	/* Instaclock registers (corerev >= 10) */
-+	uint32	system_clk_ctl;		/* 0xc0 */
-+	uint32	clkstatestretch;
-+	uint32	PAD[14];
-+
-+	/* ExtBus control registers (corerev >= 3) */
-+	uint32	pcmcia_config;		/* 0x100 */
-+	uint32	pcmcia_memwait;
-+	uint32	pcmcia_attrwait;
-+	uint32	pcmcia_iowait;
-+	uint32	ide_config;
-+	uint32	ide_memwait;
-+	uint32	ide_attrwait;
-+	uint32	ide_iowait;
-+	uint32	prog_config;
-+	uint32	prog_waitcount;
-+	uint32	flash_config;
-+	uint32	flash_waitcount;
-+	uint32	PAD[116];
-+
-+	/* uarts */
-+	uint8	uart0data;		/* 0x300 */
-+	uint8	uart0imr;
-+	uint8	uart0fcr;
-+	uint8	uart0lcr;
-+	uint8	uart0mcr;
-+	uint8	uart0lsr;
-+	uint8	uart0msr;
-+	uint8	uart0scratch;
-+	uint8	PAD[248];		/* corerev >= 1 */
-+
-+	uint8	uart1data;		/* 0x400 */
-+	uint8	uart1imr;
-+	uint8	uart1fcr;
-+	uint8	uart1lcr;
-+	uint8	uart1mcr;
-+	uint8	uart1lsr;
-+	uint8	uart1msr;
-+	uint8	uart1scratch;
-+} chipcregs_t;
-+
-+#endif /* _LANGUAGE_ASSEMBLY */
-+
-+#define	CC_CHIPID		0
-+#define	CC_CAPABILITIES		4
-+#define	CC_JTAGCMD		0x30
-+#define	CC_JTAGIR		0x34
-+#define	CC_JTAGDR		0x38
-+#define	CC_JTAGCTRL		0x3c
-+#define	CC_WATCHDOG		0x80
-+#define	CC_CLKC_N		0x90
-+#define	CC_CLKC_M0		0x94
-+#define	CC_CLKC_M1		0x98
-+#define	CC_CLKC_M2		0x9c
-+#define	CC_CLKC_M3		0xa0
-+#define	CC_CLKDIV		0xa4
-+#define	CC_SYS_CLK_CTL		0xc0
-+#define	CC_OTP			0x800
-+
-+/* chipid */
-+#define	CID_ID_MASK		0x0000ffff		/* Chip Id mask */
-+#define	CID_REV_MASK		0x000f0000		/* Chip Revision mask */
-+#define	CID_REV_SHIFT		16			/* Chip Revision shift */
-+#define	CID_PKG_MASK		0x00f00000		/* Package Option mask */
-+#define	CID_PKG_SHIFT		20			/* Package Option shift */
-+#define	CID_CC_MASK		0x0f000000		/* CoreCount (corerev >= 4) */
-+#define CID_CC_SHIFT		24
-+
-+/* capabilities */
-+#define	CAP_UARTS_MASK		0x00000003		/* Number of uarts */
-+#define CAP_MIPSEB		0x00000004		/* MIPS is in big-endian mode */
-+#define CAP_UCLKSEL		0x00000018		/* UARTs clock select */
-+#define CAP_UINTCLK		0x00000008		/* UARTs are driven by internal divided clock */
-+#define CAP_UARTGPIO		0x00000020		/* UARTs own Gpio's 15:12 */
-+#define CAP_EXTBUS		0x00000040		/* External bus present */
-+#define	CAP_FLASH_MASK		0x00000700		/* Type of flash */
-+#define	CAP_PLL_MASK		0x00038000		/* Type of PLL */
-+#define CAP_PWR_CTL		0x00040000		/* Power control */
-+#define CAP_OTPSIZE		0x00380000		/* OTP Size (0 = none) */
-+#define CAP_OTPSIZE_SHIFT	19			/* OTP Size shift */
-+#define CAP_OTPSIZE_BASE	5			/* OTP Size base */
-+#define CAP_JTAGP		0x00400000		/* JTAG Master Present */
-+#define CAP_ROM			0x00800000		/* Internal boot rom active */
-+
-+/* PLL type */
-+#define PLL_NONE		0x00000000
-+#define PLL_TYPE1		0x00010000		/* 48Mhz base, 3 dividers */
-+#define PLL_TYPE2		0x00020000		/* 48Mhz, 4 dividers */
-+#define PLL_TYPE3		0x00030000		/* 25Mhz, 2 dividers */
-+#define PLL_TYPE4		0x00008000		/* 48Mhz, 4 dividers */
-+#define PLL_TYPE5		0x00018000		/* 25Mhz, 4 dividers */
-+#define PLL_TYPE6		0x00028000		/* 100/200 or 120/240 only */
-+#define PLL_TYPE7		0x00038000		/* 25Mhz, 4 dividers */
-+
-+/* corecontrol */
-+#define CC_UARTCLKO		0x00000001		/* Drive UART with internal clock */
-+#define	CC_SE			0x00000002		/* sync clk out enable (corerev >= 3) */
-+
-+/* Fields in the otpstatus register */
-+#define	OTPS_PROGFAIL		0x80000000
-+#define	OTPS_PROTECT		0x00000007
-+#define	OTPS_HW_PROTECT		0x00000001
-+#define	OTPS_SW_PROTECT		0x00000002
-+#define	OTPS_CID_PROTECT	0x00000004
-+
-+/* Fields in the otpcontrol register */
-+#define	OTPC_RECWAIT		0xff000000
-+#define	OTPC_PROGWAIT		0x00ffff00
-+#define	OTPC_PRW_SHIFT		8
-+#define	OTPC_MAXFAIL		0x00000038
-+#define	OTPC_VSEL		0x00000006
-+#define	OTPC_SELVL		0x00000001
-+
-+/* Fields in otpprog */
-+#define	OTPP_COL_MASK		0x000000ff
-+#define	OTPP_ROW_MASK		0x0000ff00
-+#define	OTPP_ROW_SHIFT		8
-+#define	OTPP_READERR		0x10000000
-+#define	OTPP_VALUE		0x20000000
-+#define	OTPP_VALUE_SHIFT		29
-+#define	OTPP_READ		0x40000000
-+#define	OTPP_START		0x80000000
-+#define	OTPP_BUSY		0x80000000
-+
-+/* jtagcmd */
-+#define JCMD_START		0x80000000
-+#define JCMD_BUSY		0x80000000
-+#define JCMD_PAUSE		0x40000000
-+#define JCMD0_ACC_MASK		0x0000f000
-+#define JCMD0_ACC_IRDR		0x00000000
-+#define JCMD0_ACC_DR		0x00001000
-+#define JCMD0_ACC_IR		0x00002000
-+#define JCMD0_ACC_RESET		0x00003000
-+#define JCMD0_ACC_IRPDR		0x00004000
-+#define JCMD0_ACC_PDR		0x00005000
-+#define JCMD0_IRW_MASK		0x00000f00
-+#define JCMD_ACC_MASK		0x000f0000		/* Changes for corerev 11 */
-+#define JCMD_ACC_IRDR		0x00000000
-+#define JCMD_ACC_DR		0x00010000
-+#define JCMD_ACC_IR		0x00020000
-+#define JCMD_ACC_RESET		0x00030000
-+#define JCMD_ACC_IRPDR		0x00040000
-+#define JCMD_ACC_PDR		0x00050000
-+#define JCMD_IRW_MASK		0x00001f00
-+#define JCMD_IRW_SHIFT		8
-+#define JCMD_DRW_MASK		0x0000003f
-+
-+/* jtagctrl */
-+#define JCTRL_FORCE_CLK		4			/* Force clock */
-+#define JCTRL_EXT_EN		2			/* Enable external targets */
-+#define JCTRL_EN		1			/* Enable Jtag master */
-+
-+/* Fields in clkdiv */
-+#define	CLKD_SFLASH		0x0f000000
-+#define	CLKD_SFLASH_SHIFT	24
-+#define	CLKD_OTP		0x000f0000
-+#define	CLKD_OTP_SHIFT		16
-+#define	CLKD_JTAG		0x00000f00
-+#define	CLKD_JTAG_SHIFT		8		
-+#define	CLKD_UART		0x000000ff
-+
-+/* intstatus/intmask */
-+#define	CI_GPIO			0x00000001		/* gpio intr */
-+#define	CI_EI			0x00000002		/* ro: ext intr pin (corerev >= 3) */
-+#define	CI_WDRESET		0x80000000		/* watchdog reset occurred */
-+
-+/* slow_clk_ctl */
-+#define SCC_SS_MASK		0x00000007		/* slow clock source mask */
-+#define	SCC_SS_LPO		0x00000000		/* source of slow clock is LPO */
-+#define	SCC_SS_XTAL		0x00000001		/* source of slow clock is crystal */
-+#define	SCC_SS_PCI		0x00000002		/* source of slow clock is PCI */
-+#define SCC_LF			0x00000200		/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
-+#define SCC_LP			0x00000400		/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
-+#define SCC_FS			0x00000800		/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
-+#define SCC_IP			0x00001000		/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
-+#define SCC_XC			0x00002000		/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
-+#define SCC_XP			0x00004000		/* XtalPU (RO), 1/0: crystal running/disabled */
-+#define SCC_CD_MASK		0xffff0000		/* ClockDivider (SlowClk = 1/(4+divisor)) */
-+#define SCC_CD_SHIFT		16
-+
-+/* system_clk_ctl */
-+#define	SYCC_IE			0x00000001		/* ILPen: Enable Idle Low Power */
-+#define	SYCC_AE			0x00000002		/* ALPen: Enable Active Low Power */
-+#define	SYCC_FP			0x00000004		/* ForcePLLOn */
-+#define	SYCC_AR			0x00000008		/* Force ALP (or HT if ALPen is not set */
-+#define	SYCC_HR			0x00000010		/* Force HT */
-+#define SYCC_CD_MASK		0xffff0000		/* ClkDiv  (ILP = 1/(4+divisor)) */
-+#define SYCC_CD_SHIFT		16
-+
-+/* gpiotimerval*/
-+#define GPIO_ONTIME_SHIFT	16
-+
-+/* clockcontrol_n */
-+#define	CN_N1_MASK		0x3f			/* n1 control */
-+#define	CN_N2_MASK		0x3f00			/* n2 control */
-+#define	CN_N2_SHIFT		8
-+#define	CN_PLLC_MASK		0xf0000			/* pll control */
-+#define	CN_PLLC_SHIFT		16
-+
-+/* clockcontrol_sb/pci/uart */
-+#define	CC_M1_MASK		0x3f			/* m1 control */
-+#define	CC_M2_MASK		0x3f00			/* m2 control */
-+#define	CC_M2_SHIFT		8
-+#define	CC_M3_MASK		0x3f0000		/* m3 control */
-+#define	CC_M3_SHIFT		16
-+#define	CC_MC_MASK		0x1f000000		/* mux control */
-+#define	CC_MC_SHIFT		24
-+
-+/* N3M Clock control magic field values */
-+#define	CC_F6_2			0x02			/* A factor of 2 in */
-+#define	CC_F6_3			0x03			/* 6-bit fields like */
-+#define	CC_F6_4			0x05			/* N1, M1 or M3 */
-+#define	CC_F6_5			0x09
-+#define	CC_F6_6			0x11
-+#define	CC_F6_7			0x21
-+
-+#define	CC_F5_BIAS		5			/* 5-bit fields get this added */
-+
-+#define	CC_MC_BYPASS		0x08
-+#define	CC_MC_M1		0x04
-+#define	CC_MC_M1M2		0x02
-+#define	CC_MC_M1M2M3		0x01
-+#define	CC_MC_M1M3		0x11
-+
-+/* Type 2 Clock control magic field values */
-+#define	CC_T2_BIAS		2			/* n1, n2, m1 & m3 bias */
-+#define	CC_T2M2_BIAS		3			/* m2 bias */
-+
-+#define	CC_T2MC_M1BYP		1
-+#define	CC_T2MC_M2BYP		2
-+#define	CC_T2MC_M3BYP		4
-+
-+/* Type 6 Clock control magic field values */
-+#define	CC_T6_MMASK		1			/* bits of interest in m */
-+#define	CC_T6_M0		120000000		/* sb clock for m = 0 */
-+#define	CC_T6_M1		100000000		/* sb clock for m = 1 */
-+#define	SB2MIPS_T6(sb)		(2 * (sb))
-+
-+/* Common clock base */
-+#define	CC_CLOCK_BASE1		24000000		/* Half the clock freq */
-+#define CC_CLOCK_BASE2		12500000		/* Alternate crystal on some PLL's */
-+
-+/* Clock control values for 200Mhz in 5350 */
-+#define	CLKC_5350_N		0x0311
-+#define	CLKC_5350_M		0x04020009
-+
-+/* Flash types in the chipcommon capabilities register */
-+#define FLASH_NONE		0x000		/* No flash */
-+#define SFLASH_ST		0x100		/* ST serial flash */
-+#define SFLASH_AT		0x200		/* Atmel serial flash */
-+#define	PFLASH			0x700		/* Parallel flash */
-+
-+/* Bits in the config registers */
-+#define	CC_CFG_EN		0x0001		/* Enable */
-+#define	CC_CFG_EM_MASK		0x000e		/* Extif Mode */
-+#define	CC_CFG_EM_ASYNC		0x0002		/*   Async/Parallel flash */
-+#define	CC_CFG_EM_SYNC		0x0004		/*   Synchronous */
-+#define	CC_CFG_EM_PCMCIA	0x0008		/*   PCMCIA */
-+#define	CC_CFG_EM_IDE		0x000a		/*   IDE */
-+#define	CC_CFG_DS		0x0010		/* Data size, 0=8bit, 1=16bit */
-+#define	CC_CFG_CD_MASK		0x0060		/* Sync: Clock divisor */
-+#define	CC_CFG_CE		0x0080		/* Sync: Clock enable */
-+#define	CC_CFG_SB		0x0100		/* Sync: Size/Bytestrobe */
-+
-+/* Start/busy bit in flashcontrol */
-+#define SFLASH_START		0x80000000
-+#define SFLASH_BUSY		SFLASH_START
-+
-+/* flashcontrol opcodes for ST flashes */
-+#define SFLASH_ST_WREN		0x0006		/* Write Enable */
-+#define SFLASH_ST_WRDIS		0x0004		/* Write Disable */
-+#define SFLASH_ST_RDSR		0x0105		/* Read Status Register */
-+#define SFLASH_ST_WRSR		0x0101		/* Write Status Register */
-+#define SFLASH_ST_READ		0x0303		/* Read Data Bytes */
-+#define SFLASH_ST_PP		0x0302		/* Page Program */
-+#define SFLASH_ST_SE		0x02d8		/* Sector Erase */
-+#define SFLASH_ST_BE		0x00c7		/* Bulk Erase */
-+#define SFLASH_ST_DP		0x00b9		/* Deep Power-down */
-+#define SFLASH_ST_RES		0x03ab		/* Read Electronic Signature */
-+
-+/* Status register bits for ST flashes */
-+#define SFLASH_ST_WIP		0x01		/* Write In Progress */
-+#define SFLASH_ST_WEL		0x02		/* Write Enable Latch */
-+#define SFLASH_ST_BP_MASK	0x1c		/* Block Protect */
-+#define SFLASH_ST_BP_SHIFT	2
-+#define SFLASH_ST_SRWD		0x80		/* Status Register Write Disable */
-+
-+/* flashcontrol opcodes for Atmel flashes */
-+#define SFLASH_AT_READ				0x07e8
-+#define SFLASH_AT_PAGE_READ			0x07d2
-+#define SFLASH_AT_BUF1_READ
-+#define SFLASH_AT_BUF2_READ
-+#define SFLASH_AT_STATUS			0x01d7
-+#define SFLASH_AT_BUF1_WRITE			0x0384
-+#define SFLASH_AT_BUF2_WRITE			0x0387
-+#define SFLASH_AT_BUF1_ERASE_PROGRAM		0x0283
-+#define SFLASH_AT_BUF2_ERASE_PROGRAM		0x0286
-+#define SFLASH_AT_BUF1_PROGRAM			0x0288
-+#define SFLASH_AT_BUF2_PROGRAM			0x0289
-+#define SFLASH_AT_PAGE_ERASE			0x0281
-+#define SFLASH_AT_BLOCK_ERASE			0x0250
-+#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM	0x0382
-+#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM	0x0385
-+#define SFLASH_AT_BUF1_LOAD			0x0253
-+#define SFLASH_AT_BUF2_LOAD			0x0255
-+#define SFLASH_AT_BUF1_COMPARE			0x0260
-+#define SFLASH_AT_BUF2_COMPARE			0x0261
-+#define SFLASH_AT_BUF1_REPROGRAM		0x0258
-+#define SFLASH_AT_BUF2_REPROGRAM		0x0259
-+
-+/* Status register bits for Atmel flashes */
-+#define SFLASH_AT_READY				0x80
-+#define SFLASH_AT_MISMATCH			0x40
-+#define SFLASH_AT_ID_MASK			0x38
-+#define SFLASH_AT_ID_SHIFT			3
-+
-+/* OTP regions */
-+#define	OTP_HW_REGION	OTPS_HW_PROTECT
-+#define	OTP_SW_REGION	OTPS_SW_PROTECT
-+#define	OTP_CID_REGION	OTPS_CID_PROTECT
-+
-+/* OTP regions (Byte offsets from otp size) */
-+#define	OTP_SWLIM_OFF	(-8)
-+#define	OTP_CIDBASE_OFF	0
-+#define	OTP_CIDLIM_OFF	8
-+
-+/* Predefined OTP words (Word offset from otp size) */
-+#define	OTP_BOUNDARY_OFF (-4)
-+#define	OTP_HWSIGN_OFF	(-3)
-+#define	OTP_SWSIGN_OFF	(-2)
-+#define	OTP_CIDSIGN_OFF	(-1)
-+
-+#define	OTP_CID_OFF	0
-+#define	OTP_PKG_OFF	1
-+#define	OTP_FID_OFF	2
-+#define	OTP_RSV_OFF	3
-+#define	OTP_LIM_OFF	4
-+
-+#define	OTP_SIGNATURE	0x578a
-+#define	OTP_MAGIC	0x4e56
-+
-+#endif	/* _SBCHIPC_H */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbconfig.h
---- linux-2.6.16/arch/mips/bcm947xx/include/sbconfig.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbconfig.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,342 @@
-+/*
-+ * Broadcom SiliconBackplane hardware register definitions.
-+ *
-+ * Copyright 2005, Broadcom Corporation      
-+ * All Rights Reserved.      
-+ *       
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
-+ * $Id$
-+ */
-+
-+#ifndef	_SBCONFIG_H
-+#define	_SBCONFIG_H
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif
-+
-+/*
-+ * SiliconBackplane Address Map.
-+ * All regions may not exist on all chips.
-+ */
-+#define SB_SDRAM_BASE		0x00000000	/* Physical SDRAM */
-+#define SB_PCI_MEM		0x08000000	/* Host Mode sb2pcitranslation0 (64 MB) */
-+#define SB_PCI_CFG		0x0c000000	/* Host Mode sb2pcitranslation1 (64 MB) */
-+#define	SB_SDRAM_SWAPPED	0x10000000	/* Byteswapped Physical SDRAM */
-+#define SB_ENUM_BASE    	0x18000000	/* Enumeration space base */
-+#define	SB_ENUM_LIM		0x18010000	/* Enumeration space limit */
-+
-+#define	SB_FLASH2		0x1c000000	/* Flash Region 2 (region 1 shadowed here) */
-+#define	SB_FLASH2_SZ		0x02000000	/* Size of Flash Region 2 */
-+
-+#define	SB_EXTIF_BASE		0x1f000000	/* External Interface region base address */
-+#define	SB_FLASH1		0x1fc00000	/* Flash Region 1 */
-+#define	SB_FLASH1_SZ		0x00400000	/* Size of Flash Region 1 */
-+
-+#define SB_PCI_DMA		0x40000000	/* Client Mode sb2pcitranslation2 (1 GB) */
-+#define SB_PCI_DMA_SZ		0x40000000	/* Client Mode sb2pcitranslation2 size in bytes */
-+#define SB_PCIE_DMA_L32		0x00000000	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */
-+#define SB_PCIE_DMA_H32		0x80000000	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */
-+#define	SB_EUART		(SB_EXTIF_BASE + 0x00800000)
-+#define	SB_LED			(SB_EXTIF_BASE + 0x00900000)
-+
-+
-+/* enumeration space related defs */
-+#define SB_CORE_SIZE    	0x1000		/* each core gets 4Kbytes for registers */
-+#define	SB_MAXCORES		((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE)
-+#define	SBCONFIGOFF		0xf00		/* core sbconfig regs are top 256bytes of regs */
-+#define	SBCONFIGSIZE		256		/* sizeof (sbconfig_t) */
-+
-+/* mips address */
-+#define	SB_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
-+
-+/*
-+ * Sonics Configuration Space Registers.
-+ */
-+#define SBIPSFLAG		0x08
-+#define SBTPSFLAG		0x18
-+#define	SBTMERRLOGA		0x48		/* sonics >= 2.3 */
-+#define	SBTMERRLOG		0x50		/* sonics >= 2.3 */
-+#define SBADMATCH3		0x60
-+#define SBADMATCH2		0x68
-+#define SBADMATCH1		0x70
-+#define SBIMSTATE		0x90
-+#define SBINTVEC		0x94
-+#define SBTMSTATELOW		0x98
-+#define SBTMSTATEHIGH		0x9c
-+#define SBBWA0			0xa0
-+#define SBIMCONFIGLOW		0xa8
-+#define SBIMCONFIGHIGH		0xac
-+#define SBADMATCH0		0xb0
-+#define SBTMCONFIGLOW		0xb8
-+#define SBTMCONFIGHIGH		0xbc
-+#define SBBCONFIG		0xc0
-+#define SBBSTATE		0xc8
-+#define SBACTCNFG		0xd8
-+#define	SBFLAGST		0xe8
-+#define SBIDLOW			0xf8
-+#define SBIDHIGH		0xfc
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+typedef volatile struct _sbconfig {
-+	uint32	PAD[2];
-+	uint32	sbipsflag;		/* initiator port ocp slave flag */
-+	uint32	PAD[3];
-+	uint32	sbtpsflag;		/* target port ocp slave flag */
-+	uint32	PAD[11];
-+	uint32	sbtmerrloga;		/* (sonics >= 2.3) */
-+	uint32	PAD;
-+	uint32	sbtmerrlog;		/* (sonics >= 2.3) */
-+	uint32	PAD[3];
-+	uint32	sbadmatch3;		/* address match3 */
-+	uint32	PAD;
-+	uint32	sbadmatch2;		/* address match2 */
-+	uint32	PAD;
-+	uint32	sbadmatch1;		/* address match1 */
-+	uint32	PAD[7];
-+	uint32	sbimstate;		/* initiator agent state */
-+	uint32	sbintvec;		/* interrupt mask */
-+	uint32	sbtmstatelow;		/* target state */
-+	uint32	sbtmstatehigh;		/* target state */
-+	uint32	sbbwa0;			/* bandwidth allocation table0 */
-+	uint32	PAD;
-+	uint32	sbimconfiglow;		/* initiator configuration */
-+	uint32	sbimconfighigh;		/* initiator configuration */
-+	uint32	sbadmatch0;		/* address match0 */
-+	uint32	PAD;
-+	uint32	sbtmconfiglow;		/* target configuration */
-+	uint32	sbtmconfighigh;		/* target configuration */
-+	uint32	sbbconfig;		/* broadcast configuration */
-+	uint32	PAD;
-+	uint32	sbbstate;		/* broadcast state */
-+	uint32	PAD[3];
-+	uint32	sbactcnfg;		/* activate configuration */
-+	uint32	PAD[3];
-+	uint32	sbflagst;		/* current sbflags */
-+	uint32	PAD[3];
-+	uint32	sbidlow;		/* identification */
-+	uint32	sbidhigh;		/* identification */
-+} sbconfig_t;
-+
-+#endif /* _LANGUAGE_ASSEMBLY */
-+
-+/* sbipsflag */
-+#define	SBIPS_INT1_MASK		0x3f		/* which sbflags get routed to mips interrupt 1 */
-+#define	SBIPS_INT1_SHIFT	0
-+#define	SBIPS_INT2_MASK		0x3f00		/* which sbflags get routed to mips interrupt 2 */
-+#define	SBIPS_INT2_SHIFT	8
-+#define	SBIPS_INT3_MASK		0x3f0000	/* which sbflags get routed to mips interrupt 3 */
-+#define	SBIPS_INT3_SHIFT	16
-+#define	SBIPS_INT4_MASK		0x3f000000	/* which sbflags get routed to mips interrupt 4 */
-+#define	SBIPS_INT4_SHIFT	24
-+
-+/* sbtpsflag */
-+#define	SBTPS_NUM0_MASK		0x3f		/* interrupt sbFlag # generated by this core */
-+#define	SBTPS_F0EN0		0x40		/* interrupt is always sent on the backplane */
-+
-+/* sbtmerrlog */
-+#define	SBTMEL_CM		0x00000007	/* command */
-+#define	SBTMEL_CI		0x0000ff00	/* connection id */
-+#define	SBTMEL_EC		0x0f000000	/* error code */
-+#define	SBTMEL_ME		0x80000000	/* multiple error */
-+
-+/* sbimstate */
-+#define	SBIM_PC			0xf		/* pipecount */
-+#define	SBIM_AP_MASK		0x30		/* arbitration policy */
-+#define	SBIM_AP_BOTH		0x00		/* use both timeslaces and token */
-+#define	SBIM_AP_TS		0x10		/* use timesliaces only */
-+#define	SBIM_AP_TK		0x20		/* use token only */
-+#define	SBIM_AP_RSV		0x30		/* reserved */
-+#define	SBIM_IBE		0x20000		/* inbanderror */
-+#define	SBIM_TO			0x40000		/* timeout */
-+#define	SBIM_BY			0x01800000	/* busy (sonics >= 2.3) */
-+#define	SBIM_RJ			0x02000000	/* reject (sonics >= 2.3) */
-+
-+/* sbtmstatelow */
-+#define	SBTML_RESET		0x1		/* reset */
-+#define	SBTML_REJ_MASK		0x6		/* reject */
-+#define	SBTML_REJ_SHIFT		1
-+#define	SBTML_CLK		0x10000		/* clock enable */
-+#define	SBTML_FGC		0x20000		/* force gated clocks on */
-+#define	SBTML_FL_MASK		0x3ffc0000	/* core-specific flags */
-+#define	SBTML_PE		0x40000000	/* pme enable */
-+#define	SBTML_BE		0x80000000	/* bist enable */
-+
-+/* sbtmstatehigh */
-+#define	SBTMH_SERR		0x1		/* serror */
-+#define	SBTMH_INT		0x2		/* interrupt */
-+#define	SBTMH_BUSY		0x4		/* busy */
-+#define	SBTMH_TO		0x00000020	/* timeout (sonics >= 2.3) */
-+#define	SBTMH_FL_MASK		0x1fff0000	/* core-specific flags */
-+#define SBTMH_DMA64		0x10000000      /* supports DMA with 64-bit addresses */
-+#define	SBTMH_GCR		0x20000000	/* gated clock request */
-+#define	SBTMH_BISTF		0x40000000	/* bist failed */
-+#define	SBTMH_BISTD		0x80000000	/* bist done */
-+
-+
-+/* sbbwa0 */
-+#define	SBBWA_TAB0_MASK		0xffff		/* lookup table 0 */
-+#define	SBBWA_TAB1_MASK		0xffff		/* lookup table 1 */
-+#define	SBBWA_TAB1_SHIFT	16
-+
-+/* sbimconfiglow */
-+#define	SBIMCL_STO_MASK		0x7		/* service timeout */
-+#define	SBIMCL_RTO_MASK		0x70		/* request timeout */
-+#define	SBIMCL_RTO_SHIFT	4
-+#define	SBIMCL_CID_MASK		0xff0000	/* connection id */
-+#define	SBIMCL_CID_SHIFT	16
-+
-+/* sbimconfighigh */
-+#define	SBIMCH_IEM_MASK		0xc		/* inband error mode */
-+#define	SBIMCH_TEM_MASK		0x30		/* timeout error mode */
-+#define	SBIMCH_TEM_SHIFT	4
-+#define	SBIMCH_BEM_MASK		0xc0		/* bus error mode */
-+#define	SBIMCH_BEM_SHIFT	6
-+
-+/* sbadmatch0 */
-+#define	SBAM_TYPE_MASK		0x3		/* address type */
-+#define	SBAM_AD64		0x4		/* reserved */
-+#define	SBAM_ADINT0_MASK	0xf8		/* type0 size */
-+#define	SBAM_ADINT0_SHIFT	3
-+#define	SBAM_ADINT1_MASK	0x1f8		/* type1 size */
-+#define	SBAM_ADINT1_SHIFT	3
-+#define	SBAM_ADINT2_MASK	0x1f8		/* type2 size */
-+#define	SBAM_ADINT2_SHIFT	3
-+#define	SBAM_ADEN		0x400		/* enable */
-+#define	SBAM_ADNEG		0x800		/* negative decode */
-+#define	SBAM_BASE0_MASK		0xffffff00	/* type0 base address */
-+#define	SBAM_BASE0_SHIFT	8
-+#define	SBAM_BASE1_MASK		0xfffff000	/* type1 base address for the core */
-+#define	SBAM_BASE1_SHIFT	12
-+#define	SBAM_BASE2_MASK		0xffff0000	/* type2 base address for the core */
-+#define	SBAM_BASE2_SHIFT	16
-+
-+/* sbtmconfiglow */
-+#define	SBTMCL_CD_MASK		0xff		/* clock divide */
-+#define	SBTMCL_CO_MASK		0xf800		/* clock offset */
-+#define	SBTMCL_CO_SHIFT		11
-+#define	SBTMCL_IF_MASK		0xfc0000	/* interrupt flags */
-+#define	SBTMCL_IF_SHIFT		18
-+#define	SBTMCL_IM_MASK		0x3000000	/* interrupt mode */
-+#define	SBTMCL_IM_SHIFT		24
-+
-+/* sbtmconfighigh */
-+#define	SBTMCH_BM_MASK		0x3		/* busy mode */
-+#define	SBTMCH_RM_MASK		0x3		/* retry mode */
-+#define	SBTMCH_RM_SHIFT		2
-+#define	SBTMCH_SM_MASK		0x30		/* stop mode */
-+#define	SBTMCH_SM_SHIFT		4
-+#define	SBTMCH_EM_MASK		0x300		/* sb error mode */
-+#define	SBTMCH_EM_SHIFT		8
-+#define	SBTMCH_IM_MASK		0xc00		/* int mode */
-+#define	SBTMCH_IM_SHIFT		10
-+
-+/* sbbconfig */
-+#define	SBBC_LAT_MASK		0x3		/* sb latency */
-+#define	SBBC_MAX0_MASK		0xf0000		/* maxccntr0 */
-+#define	SBBC_MAX0_SHIFT		16
-+#define	SBBC_MAX1_MASK		0xf00000	/* maxccntr1 */
-+#define	SBBC_MAX1_SHIFT		20
-+
-+/* sbbstate */
-+#define	SBBS_SRD		0x1		/* st reg disable */
-+#define	SBBS_HRD		0x2		/* hold reg disable */
-+
-+/* sbidlow */
-+#define	SBIDL_CS_MASK		0x3		/* config space */
-+#define	SBIDL_AR_MASK		0x38		/* # address ranges supported */
-+#define	SBIDL_AR_SHIFT		3
-+#define	SBIDL_SYNCH		0x40		/* sync */
-+#define	SBIDL_INIT		0x80		/* initiator */
-+#define	SBIDL_MINLAT_MASK	0xf00		/* minimum backplane latency */
-+#define	SBIDL_MINLAT_SHIFT	8
-+#define	SBIDL_MAXLAT		0xf000		/* maximum backplane latency */
-+#define	SBIDL_MAXLAT_SHIFT	12
-+#define	SBIDL_FIRST		0x10000		/* this initiator is first */
-+#define	SBIDL_CW_MASK		0xc0000		/* cycle counter width */
-+#define	SBIDL_CW_SHIFT		18
-+#define	SBIDL_TP_MASK		0xf00000	/* target ports */
-+#define	SBIDL_TP_SHIFT		20
-+#define	SBIDL_IP_MASK		0xf000000	/* initiator ports */
-+#define	SBIDL_IP_SHIFT		24
-+#define	SBIDL_RV_MASK		0xf0000000	/* sonics backplane revision code */
-+#define	SBIDL_RV_SHIFT		28
-+#define	SBIDL_RV_2_2		0x00000000	/* version 2.2 or earlier */
-+#define	SBIDL_RV_2_3		0x10000000	/* version 2.3 */
-+
-+/* sbidhigh */
-+#define	SBIDH_RC_MASK		0x000f		/* revision code */
-+#define	SBIDH_RCE_MASK		0x7000		/* revision code extension field */
-+#define	SBIDH_RCE_SHIFT		8
-+#define	SBCOREREV(sbidh) \
-+	((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK))
-+#define	SBIDH_CC_MASK		0x8ff0		/* core code */
-+#define	SBIDH_CC_SHIFT		4
-+#define	SBIDH_VC_MASK		0xffff0000	/* vendor code */
-+#define	SBIDH_VC_SHIFT		16
-+
-+#define	SB_COMMIT		0xfd8		/* update buffered registers value */
-+
-+/* vendor codes */
-+#define	SB_VEND_BCM		0x4243		/* Broadcom's SB vendor code */
-+
-+/* core codes */
-+#define	SB_CC			0x800		/* chipcommon core */
-+#define	SB_ILINE20		0x801		/* iline20 core */
-+#define	SB_SDRAM		0x803		/* sdram core */
-+#define	SB_PCI			0x804		/* pci core */
-+#define	SB_MIPS			0x805		/* mips core */
-+#define	SB_ENET			0x806		/* enet mac core */
-+#define	SB_CODEC		0x807		/* v90 codec core */
-+#define	SB_USB			0x808		/* usb 1.1 host/device core */
-+#define	SB_ADSL			0x809		/* ADSL core */
-+#define	SB_ILINE100		0x80a		/* iline100 core */
-+#define	SB_IPSEC		0x80b		/* ipsec core */
-+#define	SB_PCMCIA		0x80d		/* pcmcia core */
-+#define	SB_SOCRAM		0x80e		/* internal memory core */
-+#define	SB_MEMC			0x80f		/* memc sdram core */
-+#define	SB_EXTIF		0x811		/* external interface core */
-+#define	SB_D11			0x812		/* 802.11 MAC core */
-+#define	SB_MIPS33		0x816		/* mips3302 core */
-+#define	SB_USB11H		0x817		/* usb 1.1 host core */
-+#define	SB_USB11D		0x818		/* usb 1.1 device core */
-+#define	SB_USB20H		0x819		/* usb 2.0 host core */
-+#define	SB_USB20D		0x81a		/* usb 2.0 device core */
-+#define	SB_SDIOH		0x81b		/* sdio host core */
-+#define	SB_ROBO			0x81c		/* roboswitch core */
-+#define	SB_ATA100		0x81d		/* parallel ATA core */
-+#define	SB_SATAXOR		0x81e		/* serial ATA & XOR DMA core */
-+#define	SB_GIGETH		0x81f		/* gigabit ethernet core */
-+#define	SB_PCIE			0x820		/* pci express core */
-+#define	SB_SRAMC		0x822		/* SRAM controller core */
-+#define	SB_MINIMAC		0x823		/* MINI MAC/phy core */
-+
-+#define	SB_CC_IDX		0		/* chipc, when present, is always core 0 */
-+
-+/* Not really related to Silicon Backplane, but a couple of software
-+ * conventions for the use the flash space:
-+ */
-+
-+/* Minumum amount of flash we support */
-+#define FLASH_MIN		0x00020000	/* Minimum flash size */
-+
-+/* A boot/binary may have an embedded block that describes its size  */
-+#define	BISZ_OFFSET		0x3e0		/* At this offset into the binary */
-+#define	BISZ_MAGIC		0x4249535a	/* Marked with this value: 'BISZ' */
-+#define	BISZ_MAGIC_IDX		0		/* Word 0: magic */
-+#define	BISZ_TXTST_IDX		1		/*	1: text start */
-+#define	BISZ_TXTEND_IDX		2		/*	2: text start */
-+#define	BISZ_DATAST_IDX		3		/*	3: text start */
-+#define	BISZ_DATAEND_IDX	4		/*	4: text start */
-+#define	BISZ_BSSST_IDX		5		/*	5: text start */
-+#define	BISZ_BSSEND_IDX		6		/*	6: text start */
-+#define BISZ_SIZE		7		/* descriptor size in 32-bit intergers */
-+
-+#endif	/* _SBCONFIG_H */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/sbextif.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbextif.h
---- linux-2.6.16/arch/mips/bcm947xx/include/sbextif.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbextif.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,242 @@
-+/*
-+ * Hardware-specific External Interface I/O core definitions
-+ * for the BCM47xx family of SiliconBackplane-based chips.
-+ *
-+ * The External Interface core supports a total of three external chip selects
-+ * supporting external interfaces. One of the external chip selects is
-+ * used for Flash, one is used for PCMCIA, and the other may be
-+ * programmed to support either a synchronous interface or an
-+ * asynchronous interface. The asynchronous interface can be used to
-+ * support external devices such as UARTs and the BCM2019 Bluetooth
-+ * baseband processor.
-+ * The external interface core also contains 2 on-chip 16550 UARTs, clock
-+ * frequency control, a watchdog interrupt timer, and a GPIO interface.
-+ *
-+ * Copyright 2005, Broadcom Corporation      
-+ * All Rights Reserved.      
-+ *       
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
-+ * $Id$
-+ */
-+
-+#ifndef	_SBEXTIF_H
-+#define	_SBEXTIF_H
-+
-+/* external interface address space */
-+#define	EXTIF_PCMCIA_MEMBASE(x)	(x)
-+#define	EXTIF_PCMCIA_IOBASE(x)	((x) + 0x100000)
-+#define	EXTIF_PCMCIA_CFGBASE(x)	((x) + 0x200000)
-+#define	EXTIF_CFGIF_BASE(x)	((x) + 0x800000)
-+#define	EXTIF_FLASH_BASE(x)	((x) + 0xc00000)
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif	/* PAD */
-+
-+/*
-+ * The multiple instances of output and output enable registers
-+ * are present to allow driver software for multiple cores to control
-+ * gpio outputs without needing to share a single register pair.
-+ */
-+struct gpiouser {
-+	uint32	out;
-+	uint32	outen;
-+};
-+#define	NGPIOUSER	5
-+
-+typedef volatile struct {
-+	uint32	corecontrol;
-+	uint32	extstatus;
-+	uint32	PAD[2];
-+
-+	/* pcmcia control registers */
-+	uint32	pcmcia_config;
-+	uint32	pcmcia_memwait;
-+	uint32	pcmcia_attrwait;
-+	uint32	pcmcia_iowait;
-+
-+	/* programmable interface control registers */
-+	uint32	prog_config;
-+	uint32	prog_waitcount;
-+
-+	/* flash control registers */
-+	uint32	flash_config;
-+	uint32	flash_waitcount;
-+	uint32	PAD[4];
-+
-+	uint32	watchdog;
-+
-+	/* clock control */
-+	uint32	clockcontrol_n;
-+	uint32	clockcontrol_sb;
-+	uint32	clockcontrol_pci;
-+	uint32	clockcontrol_mii;
-+	uint32	PAD[3];
-+
-+	/* gpio */
-+	uint32	gpioin;
-+	struct gpiouser	gpio[NGPIOUSER];
-+	uint32	PAD;
-+	uint32	ejtagouten;
-+	uint32	gpiointpolarity;
-+	uint32	gpiointmask;
-+	uint32	PAD[153];
-+
-+	uint8	uartdata;
-+	uint8	PAD[3];
-+	uint8	uartimer;
-+	uint8	PAD[3];
-+	uint8	uartfcr;
-+	uint8	PAD[3];
-+	uint8	uartlcr;
-+	uint8	PAD[3];
-+	uint8	uartmcr;
-+	uint8	PAD[3];
-+	uint8	uartlsr;
-+	uint8	PAD[3];
-+	uint8	uartmsr;
-+	uint8	PAD[3];
-+	uint8	uartscratch;
-+	uint8	PAD[3];
-+} extifregs_t;
-+
-+/* corecontrol */
-+#define	CC_UE		(1 << 0)		/* uart enable */
-+
-+/* extstatus */
-+#define	ES_EM		(1 << 0)		/* endian mode (ro) */
-+#define	ES_EI		(1 << 1)		/* external interrupt pin (ro) */
-+#define	ES_GI		(1 << 2)		/* gpio interrupt pin (ro) */
-+
-+/* gpio bit mask */
-+#define GPIO_BIT0	(1 << 0)
-+#define GPIO_BIT1	(1 << 1)
-+#define GPIO_BIT2	(1 << 2)
-+#define GPIO_BIT3	(1 << 3)
-+#define GPIO_BIT4	(1 << 4)
-+#define GPIO_BIT5	(1 << 5)
-+#define GPIO_BIT6	(1 << 6)
-+#define GPIO_BIT7	(1 << 7)
-+
-+
-+/* pcmcia/prog/flash_config */
-+#define	CF_EN		(1 << 0)		/* enable */
-+#define	CF_EM_MASK	0xe			/* mode */
-+#define	CF_EM_SHIFT	1
-+#define	CF_EM_FLASH	0x0			/* flash/asynchronous mode */
-+#define	CF_EM_SYNC	0x2			/* synchronous mode */
-+#define	CF_EM_PCMCIA	0x4			/* pcmcia mode */
-+#define	CF_DS		(1 << 4)		/* destsize:  0=8bit, 1=16bit */
-+#define	CF_BS		(1 << 5)		/* byteswap */
-+#define	CF_CD_MASK	0xc0			/* clock divider */
-+#define	CF_CD_SHIFT	6
-+#define	CF_CD_DIV2	0x0			/* backplane/2 */
-+#define	CF_CD_DIV3	0x40			/* backplane/3 */
-+#define	CF_CD_DIV4	0x80			/* backplane/4 */
-+#define	CF_CE		(1 << 8)		/* clock enable */
-+#define	CF_SB		(1 << 9)		/* size/bytestrobe (synch only) */
-+
-+/* pcmcia_memwait */
-+#define	PM_W0_MASK	0x3f			/* waitcount0 */
-+#define	PM_W1_MASK	0x1f00			/* waitcount1 */
-+#define	PM_W1_SHIFT	8
-+#define	PM_W2_MASK	0x1f0000		/* waitcount2 */
-+#define	PM_W2_SHIFT	16
-+#define	PM_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	PM_W3_SHIFT	24
-+
-+/* pcmcia_attrwait */
-+#define	PA_W0_MASK	0x3f			/* waitcount0 */
-+#define	PA_W1_MASK	0x1f00			/* waitcount1 */
-+#define	PA_W1_SHIFT	8
-+#define	PA_W2_MASK	0x1f0000		/* waitcount2 */
-+#define	PA_W2_SHIFT	16
-+#define	PA_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	PA_W3_SHIFT	24
-+
-+/* pcmcia_iowait */
-+#define	PI_W0_MASK	0x3f			/* waitcount0 */
-+#define	PI_W1_MASK	0x1f00			/* waitcount1 */
-+#define	PI_W1_SHIFT	8
-+#define	PI_W2_MASK	0x1f0000		/* waitcount2 */
-+#define	PI_W2_SHIFT	16
-+#define	PI_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	PI_W3_SHIFT	24
-+
-+/* prog_waitcount */
-+#define	PW_W0_MASK	0x0000001f			/* waitcount0 */
-+#define	PW_W1_MASK	0x00001f00			/* waitcount1 */
-+#define	PW_W1_SHIFT	8
-+#define	PW_W2_MASK	0x001f0000		/* waitcount2 */
-+#define	PW_W2_SHIFT	16
-+#define	PW_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	PW_W3_SHIFT	24
-+
-+#define PW_W0       0x0000000c
-+#define PW_W1       0x00000a00
-+#define PW_W2       0x00020000
-+#define PW_W3       0x01000000
-+
-+/* flash_waitcount */
-+#define	FW_W0_MASK	0x1f			/* waitcount0 */
-+#define	FW_W1_MASK	0x1f00			/* waitcount1 */
-+#define	FW_W1_SHIFT	8
-+#define	FW_W2_MASK	0x1f0000		/* waitcount2 */
-+#define	FW_W2_SHIFT	16
-+#define	FW_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	FW_W3_SHIFT	24
-+
-+/* watchdog */
-+#define WATCHDOG_CLOCK	48000000		/* Hz */
-+
-+/* clockcontrol_n */
-+#define	CN_N1_MASK	0x3f			/* n1 control */
-+#define	CN_N2_MASK	0x3f00			/* n2 control */
-+#define	CN_N2_SHIFT	8
-+
-+/* clockcontrol_sb/pci/mii */
-+#define	CC_M1_MASK	0x3f			/* m1 control */
-+#define	CC_M2_MASK	0x3f00			/* m2 control */
-+#define	CC_M2_SHIFT	8
-+#define	CC_M3_MASK	0x3f0000		/* m3 control */
-+#define	CC_M3_SHIFT	16
-+#define	CC_MC_MASK	0x1f000000		/* mux control */
-+#define	CC_MC_SHIFT	24
-+
-+/* Clock control default values */
-+#define CC_DEF_N	0x0009			/* Default values for bcm4710 */
-+#define CC_DEF_100	0x04020011
-+#define CC_DEF_33	0x11030011
-+#define CC_DEF_25	0x11050011
-+
-+/* Clock control values for 125Mhz */
-+#define	CC_125_N	0x0802
-+#define	CC_125_M	0x04020009
-+#define	CC_125_M25	0x11090009
-+#define	CC_125_M33	0x11090005
-+
-+/* Clock control magic field values */
-+#define	CC_F6_2		0x02			/* A factor of 2 in */
-+#define	CC_F6_3		0x03			/*  6-bit fields like */
-+#define	CC_F6_4		0x05			/*  N1, M1 or M3 */
-+#define	CC_F6_5		0x09
-+#define	CC_F6_6		0x11
-+#define	CC_F6_7		0x21
-+
-+#define	CC_F5_BIAS	5			/* 5-bit fields get this added */
-+
-+#define	CC_MC_BYPASS	0x08
-+#define	CC_MC_M1	0x04
-+#define	CC_MC_M1M2	0x02
-+#define	CC_MC_M1M2M3	0x01
-+#define	CC_MC_M1M3	0x11
-+
-+#define	CC_CLOCK_BASE	24000000	/* Half the clock freq. in the 4710 */
-+
-+#endif	/* _SBEXTIF_H */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/sbmemc.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbmemc.h
---- linux-2.6.16/arch/mips/bcm947xx/include/sbmemc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbmemc.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,148 @@
-+/*
-+ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions.
-+ *
-+ * Copyright 2005, Broadcom Corporation      
-+ * All Rights Reserved.      
-+ *       
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef	_SBMEMC_H
-+#define	_SBMEMC_H
-+
-+#ifdef _LANGUAGE_ASSEMBLY
-+
-+#define	MEMC_CONTROL		0x00
-+#define	MEMC_CONFIG		0x04
-+#define	MEMC_REFRESH		0x08
-+#define	MEMC_BISTSTAT		0x0c
-+#define	MEMC_MODEBUF		0x10
-+#define	MEMC_BKCLS		0x14
-+#define	MEMC_PRIORINV		0x18
-+#define	MEMC_DRAMTIM		0x1c
-+#define	MEMC_INTSTAT		0x20
-+#define	MEMC_INTMASK		0x24
-+#define	MEMC_INTINFO		0x28
-+#define	MEMC_NCDLCTL		0x30
-+#define	MEMC_RDNCDLCOR		0x34
-+#define	MEMC_WRNCDLCOR		0x38
-+#define	MEMC_MISCDLYCTL		0x3c
-+#define	MEMC_DQSGATENCDL	0x40
-+#define	MEMC_SPARE		0x44
-+#define	MEMC_TPADDR		0x48
-+#define	MEMC_TPDATA		0x4c
-+#define	MEMC_BARRIER		0x50
-+#define	MEMC_CORE		0x54
-+
-+
-+#else
-+
-+/* Sonics side: MEMC core registers */
-+typedef volatile struct sbmemcregs {
-+	uint32	control;
-+	uint32	config;
-+	uint32	refresh;
-+	uint32	biststat;
-+	uint32	modebuf;
-+	uint32	bkcls;
-+	uint32	priorinv;
-+	uint32	dramtim;
-+	uint32	intstat;
-+	uint32	intmask;
-+	uint32	intinfo;
-+	uint32	reserved1;
-+	uint32	ncdlctl;
-+	uint32	rdncdlcor;
-+	uint32	wrncdlcor;
-+	uint32	miscdlyctl;
-+	uint32	dqsgatencdl;
-+	uint32	spare;
-+	uint32	tpaddr;
-+	uint32	tpdata;
-+	uint32	barrier;
-+	uint32	core;
-+} sbmemcregs_t;
-+
-+#endif
-+
-+/* MEMC Core Init values (OCP ID 0x80f) */
-+
-+/* For sdr: */
-+#define MEMC_SD_CONFIG_INIT	0x00048000
-+#define MEMC_SD_DRAMTIM2_INIT	0x000754d8
-+#define MEMC_SD_DRAMTIM3_INIT	0x000754da
-+#define MEMC_SD_RDNCDLCOR_INIT	0x00000000
-+#define MEMC_SD_WRNCDLCOR_INIT	0x49351200
-+#define MEMC_SD1_WRNCDLCOR_INIT	0x14500200	/* For corerev 1 (4712) */
-+#define MEMC_SD_MISCDLYCTL_INIT	0x00061c1b
-+#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416	/* For corerev 1 (4712) */
-+#define MEMC_SD_CONTROL_INIT0	0x00000002
-+#define MEMC_SD_CONTROL_INIT1	0x00000008
-+#define MEMC_SD_CONTROL_INIT2	0x00000004
-+#define MEMC_SD_CONTROL_INIT3	0x00000010
-+#define MEMC_SD_CONTROL_INIT4	0x00000001
-+#define MEMC_SD_MODEBUF_INIT	0x00000000
-+#define MEMC_SD_REFRESH_INIT	0x0000840f
-+
-+
-+/* This is for SDRM8X8X4 */
-+#define	MEMC_SDR_INIT		0x0008
-+#define	MEMC_SDR_MODE		0x32
-+#define	MEMC_SDR_NCDL		0x00020032
-+#define	MEMC_SDR1_NCDL		0x0002020f	/* For corerev 1 (4712) */
-+
-+/* For ddr: */
-+#define MEMC_CONFIG_INIT	0x00048000
-+#define MEMC_DRAMTIM2_INIT	0x000754d8
-+#define MEMC_DRAMTIM25_INIT	0x000754d9
-+#define MEMC_RDNCDLCOR_INIT	0x00000000
-+#define MEMC_RDNCDLCOR_SIMINIT	0xf6f6f6f6	/* For hdl sim */
-+#define MEMC_WRNCDLCOR_INIT	0x49351200
-+#define MEMC_1_WRNCDLCOR_INIT	0x14500200
-+#define MEMC_DQSGATENCDL_INIT	0x00030000
-+#define MEMC_MISCDLYCTL_INIT	0x21061c1b
-+#define MEMC_1_MISCDLYCTL_INIT	0x21021400
-+#define MEMC_NCDLCTL_INIT	0x00002001
-+#define MEMC_CONTROL_INIT0	0x00000002
-+#define MEMC_CONTROL_INIT1	0x00000008
-+#define MEMC_MODEBUF_INIT0	0x00004000
-+#define MEMC_CONTROL_INIT2	0x00000010
-+#define MEMC_MODEBUF_INIT1	0x00000100
-+#define MEMC_CONTROL_INIT3	0x00000010
-+#define MEMC_CONTROL_INIT4	0x00000008
-+#define MEMC_REFRESH_INIT	0x0000840f
-+#define MEMC_CONTROL_INIT5	0x00000004
-+#define MEMC_MODEBUF_INIT2	0x00000000
-+#define MEMC_CONTROL_INIT6	0x00000010
-+#define MEMC_CONTROL_INIT7	0x00000001
-+
-+
-+/* This is for DDRM16X16X2 */
-+#define	MEMC_DDR_INIT		0x0009
-+#define	MEMC_DDR_MODE		0x62
-+#define	MEMC_DDR_NCDL		0x0005050a
-+#define	MEMC_DDR1_NCDL		0x00000a0a	/* For corerev 1 (4712) */
-+
-+/* mask for sdr/ddr calibration registers */
-+#define MEMC_RDNCDLCOR_RD_MASK	0x000000ff
-+#define MEMC_WRNCDLCOR_WR_MASK	0x000000ff
-+#define MEMC_DQSGATENCDL_G_MASK	0x000000ff
-+
-+/* masks for miscdlyctl registers */
-+#define MEMC_MISC_SM_MASK	0x30000000
-+#define MEMC_MISC_SM_SHIFT	28
-+#define MEMC_MISC_SD_MASK	0x0f000000
-+#define MEMC_MISC_SD_SHIFT	24
-+
-+/* hw threshhold for calculating wr/rd for sdr memc */
-+#define MEMC_CD_THRESHOLD	128
-+
-+/* Low bit of init register says if memc is ddr or sdr */
-+#define MEMC_CONFIG_DDR		0x00000001
-+
-+#endif	/* _SBMEMC_H */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/sbmips.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbmips.h
---- linux-2.6.16/arch/mips/bcm947xx/include/sbmips.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbmips.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,62 @@
-+/*
-+ * Broadcom SiliconBackplane MIPS definitions
-+ *
-+ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane
-+ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits
-+ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP
-+ * interface. The core revision is stored in the SB ID register in SB
-+ * configuration space.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef	_SBMIPS_H
-+#define	_SBMIPS_H
-+
-+#include <mipsinc.h>
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif	/* PAD */
-+
-+typedef volatile struct {
-+	uint32	corecontrol;
-+	uint32	PAD[2];
-+	uint32	biststatus;
-+	uint32	PAD[4];
-+	uint32	intstatus;
-+	uint32	intmask;
-+	uint32	timer;
-+} mipsregs_t;
-+
-+extern uint32 sb_flag(sb_t *sbh);
-+extern uint sb_irq(sb_t *sbh);
-+
-+extern void BCMINIT(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift));
-+
-+extern void *sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap);
-+extern void sb_jtagm_disable(void *h);
-+extern uint32 jtag_rwreg(void *h, uint32 ir, uint32 dr);
-+extern void BCMINIT(sb_mips_init)(sb_t *sbh);
-+extern uint32 BCMINIT(sb_mips_clock)(sb_t *sbh);
-+extern bool BCMINIT(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock);
-+extern void BCMINIT(enable_pfc)(uint32 mode);
-+extern uint32 BCMINIT(sb_memc_get_ncdl)(sb_t *sbh);
-+
-+
-+#endif /* _LANGUAGE_ASSEMBLY */
-+
-+#endif	/* _SBMIPS_H */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/sbpci.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbpci.h
---- linux-2.6.16/arch/mips/bcm947xx/include/sbpci.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbpci.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,122 @@
-+/*
-+ * BCM47XX Sonics SiliconBackplane PCI core hardware definitions.
-+ *
-+ * $Id$
-+ * Copyright 2005, Broadcom Corporation      
-+ * All Rights Reserved.      
-+ *       
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
-+ */
-+
-+#ifndef	_SBPCI_H
-+#define	_SBPCI_H
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif
-+
-+/* Sonics side: PCI core and host control registers */
-+typedef struct sbpciregs {
-+	uint32 control;		/* PCI control */
-+	uint32 PAD[3];
-+	uint32 arbcontrol;	/* PCI arbiter control */
-+	uint32 PAD[3];
-+	uint32 intstatus;	/* Interrupt status */
-+	uint32 intmask;		/* Interrupt mask */
-+	uint32 sbtopcimailbox;	/* Sonics to PCI mailbox */
-+	uint32 PAD[9];
-+	uint32 bcastaddr;	/* Sonics broadcast address */
-+	uint32 bcastdata;	/* Sonics broadcast data */
-+	uint32 PAD[2];
-+	uint32 gpioin;		/* ro: gpio input (>=rev2) */
-+	uint32 gpioout;		/* rw: gpio output (>=rev2) */
-+	uint32 gpioouten;	/* rw: gpio output enable (>= rev2) */
-+	uint32 gpiocontrol;	/* rw: gpio control (>= rev2) */
-+	uint32 PAD[36];
-+	uint32 sbtopci0;	/* Sonics to PCI translation 0 */
-+	uint32 sbtopci1;	/* Sonics to PCI translation 1 */
-+	uint32 sbtopci2;	/* Sonics to PCI translation 2 */
-+	uint32 PAD[445];
-+	uint16 sprom[36];	/* SPROM shadow Area */
-+	uint32 PAD[46];
-+} sbpciregs_t;
-+
-+/* PCI control */
-+#define PCI_RST_OE	0x01	/* When set, drives PCI_RESET out to pin */
-+#define PCI_RST		0x02	/* Value driven out to pin */
-+#define PCI_CLK_OE	0x04	/* When set, drives clock as gated by PCI_CLK out to pin */
-+#define PCI_CLK		0x08	/* Gate for clock driven out to pin */	
-+
-+/* PCI arbiter control */
-+#define PCI_INT_ARB	0x01	/* When set, use an internal arbiter */
-+#define PCI_EXT_ARB	0x02	/* When set, use an external arbiter */
-+#define PCI_PARKID_MASK	0x06	/* Selects which agent is parked on an idle bus */
-+#define PCI_PARKID_SHIFT   1
-+#define PCI_PARKID_LAST	   0	/* Last requestor */
-+#define PCI_PARKID_4710	   1	/* 4710 */
-+#define PCI_PARKID_EXTREQ0 2	/* External requestor 0 */
-+#define PCI_PARKID_EXTREQ1 3	/* External requestor 1 */
-+
-+/* Interrupt status/mask */
-+#define PCI_INTA	0x01	/* PCI INTA# is asserted */
-+#define PCI_INTB	0x02	/* PCI INTB# is asserted */
-+#define PCI_SERR	0x04	/* PCI SERR# has been asserted (write one to clear) */
-+#define PCI_PERR	0x08	/* PCI PERR# has been asserted (write one to clear) */
-+#define PCI_PME		0x10	/* PCI PME# is asserted */
-+
-+/* (General) PCI/SB mailbox interrupts, two bits per pci function */
-+#define	MAILBOX_F0_0	0x100	/* function 0, int 0 */
-+#define	MAILBOX_F0_1	0x200	/* function 0, int 1 */
-+#define	MAILBOX_F1_0	0x400	/* function 1, int 0 */
-+#define	MAILBOX_F1_1	0x800	/* function 1, int 1 */
-+#define	MAILBOX_F2_0	0x1000	/* function 2, int 0 */
-+#define	MAILBOX_F2_1	0x2000	/* function 2, int 1 */
-+#define	MAILBOX_F3_0	0x4000	/* function 3, int 0 */
-+#define	MAILBOX_F3_1	0x8000	/* function 3, int 1 */
-+
-+/* Sonics broadcast address */
-+#define BCAST_ADDR_MASK	0xff	/* Broadcast register address */
-+
-+/* Sonics to PCI translation types */
-+#define SBTOPCI0_MASK	0xfc000000
-+#define SBTOPCI1_MASK	0xfc000000
-+#define SBTOPCI2_MASK	0xc0000000
-+#define SBTOPCI_MEM	0
-+#define SBTOPCI_IO	1
-+#define SBTOPCI_CFG0	2
-+#define SBTOPCI_CFG1	3
-+#define	SBTOPCI_PREF	0x4		/* prefetch enable */
-+#define	SBTOPCI_BURST	0x8		/* burst enable */
-+#define	SBTOPCI_RC_MASK		0x30	/* read command (>= rev11) */
-+#define	SBTOPCI_RC_READ		0x00	/* memory read */
-+#define	SBTOPCI_RC_READLINE	0x10	/* memory read line */
-+#define	SBTOPCI_RC_READMULTI	0x20	/* memory read multiple */
-+
-+/* PCI core index in SROM shadow area */
-+#define SRSH_PI_OFFSET	0	/* first word */
-+#define SRSH_PI_MASK	0xf000	/* bit 15:12 */
-+#define SRSH_PI_SHIFT	12	/* bit 15:12 */
-+
-+/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */
-+#define cap_list	rsvd_a[0]
-+#define bar0_window	dev_dep[0x80 - 0x40]
-+#define bar1_window	dev_dep[0x84 - 0x40]
-+#define sprom_control	dev_dep[0x88 - 0x40]
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+extern int sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
-+extern int sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
-+extern void sbpci_ban(uint16 core);
-+extern int sbpci_init(sb_t *sbh);
-+extern void sbpci_check(sb_t *sbh);
-+
-+#endif /* !_LANGUAGE_ASSEMBLY */
-+
-+#endif	/* _SBPCI_H */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/sbsdram.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbsdram.h
---- linux-2.6.16/arch/mips/bcm947xx/include/sbsdram.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbsdram.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,75 @@
-+/*
-+ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions.
-+ *
-+ * Copyright 2005, Broadcom Corporation      
-+ * All Rights Reserved.      
-+ *       
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
-+ * $Id$
-+ */
-+
-+#ifndef	_SBSDRAM_H
-+#define	_SBSDRAM_H
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+/* Sonics side: SDRAM core registers */
-+typedef volatile struct sbsdramregs {
-+	uint32	initcontrol;	/* Generates external SDRAM initialization sequence */
-+	uint32	config;		/* Initializes external SDRAM mode register */
-+	uint32	refresh;	/* Controls external SDRAM refresh rate */
-+	uint32	pad1;
-+	uint32	pad2;
-+} sbsdramregs_t;
-+
-+#endif
-+
-+/* SDRAM initialization control (initcontrol) register bits */
-+#define SDRAM_CBR	0x0001	/* Writing 1 generates refresh cycle and toggles bit */
-+#define SDRAM_PRE	0x0002	/* Writing 1 generates precharge cycle and toggles bit */
-+#define SDRAM_MRS	0x0004	/* Writing 1 generates mode register select cycle and toggles bit */
-+#define SDRAM_EN	0x0008	/* When set, enables access to SDRAM */
-+#define SDRAM_16Mb	0x0000	/* Use 16 Megabit SDRAM */
-+#define SDRAM_64Mb	0x0010	/* Use 64 Megabit SDRAM */
-+#define SDRAM_128Mb	0x0020	/* Use 128 Megabit SDRAM */
-+#define SDRAM_RSVMb	0x0030	/* Use special SDRAM */
-+#define SDRAM_RST	0x0080	/* Writing 1 causes soft reset of controller */
-+#define SDRAM_SELFREF	0x0100	/* Writing 1 enables self refresh mode */
-+#define SDRAM_PWRDOWN	0x0200	/* Writing 1 causes controller to power down */
-+#define SDRAM_32BIT	0x0400	/* When set, indicates 32 bit SDRAM interface */
-+#define SDRAM_9BITCOL	0x0800	/* When set, indicates 9 bit column */
-+
-+/* SDRAM configuration (config) register bits */
-+#define SDRAM_BURSTFULL	0x0000	/* Use full page bursts */
-+#define SDRAM_BURST8	0x0001	/* Use burst of 8 */
-+#define SDRAM_BURST4	0x0002	/* Use burst of 4 */
-+#define SDRAM_BURST2	0x0003	/* Use burst of 2 */
-+#define SDRAM_CAS3	0x0000	/* Use CAS latency of 3 */
-+#define SDRAM_CAS2	0x0004	/* Use CAS latency of 2 */
-+
-+/* SDRAM refresh control (refresh) register bits */
-+#define SDRAM_REF(p)	(((p)&0xff) | SDRAM_REF_EN)	/* Refresh period */
-+#define SDRAM_REF_EN	0x8000		/* Writing 1 enables periodic refresh */
-+
-+/* SDRAM Core default Init values (OCP ID 0x803) */
-+#define SDRAM_INIT	MEM4MX16X2
-+#define SDRAM_CONFIG    SDRAM_BURSTFULL
-+#define SDRAM_REFRESH   SDRAM_REF(0x40)
-+
-+#define MEM1MX16	0x009	/* 2 MB */
-+#define MEM1MX16X2	0x409	/* 4 MB */
-+#define MEM2MX8X2	0x809	/* 4 MB */
-+#define MEM2MX8X4	0xc09	/* 8 MB */
-+#define MEM2MX32	0x439	/* 8 MB */
-+#define MEM4MX16	0x019	/* 8 MB */
-+#define MEM4MX16X2	0x419	/* 16 MB */
-+#define MEM8MX8X2	0x819	/* 16 MB */
-+#define MEM8MX16	0x829	/* 16 MB */
-+#define MEM4MX32	0x429	/* 16 MB */
-+#define MEM8MX8X4	0xc19	/* 32 MB */
-+#define MEM8MX16X2	0xc29	/* 32 MB */
-+
-+#endif	/* _SBSDRAM_H */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/sbutils.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbutils.h
---- linux-2.6.16/arch/mips/bcm947xx/include/sbutils.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/sbutils.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,136 @@
-+/*
-+ * Misc utility routines for accessing chip-specific features
-+ * of Broadcom HNBU SiliconBackplane-based chips.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef	_sbutils_h_
-+#define	_sbutils_h_
-+
-+/* 
-+ * Datastructure to export all chip specific common variables 
-+ * public (read-only) portion of sbutils handle returned by 
-+ * sb_attach()/sb_kattach()
-+*/
-+
-+struct sb_pub {
-+
-+	uint	bustype;		/* SB_BUS, PCI_BUS  */
-+	uint	buscoretype;		/* SB_PCI, SB_PCMCIA, SB_PCIE*/
-+	uint	buscorerev;		/* buscore rev */
-+	uint	buscoreidx;		/* buscore index */
-+	int	ccrev;			/* chip common core rev */
-+	uint	boardtype;		/* board type */
-+	uint	boardvendor;		/* board vendor */
-+	uint	chip;			/* chip number */
-+	uint	chiprev;		/* chip revision */
-+	uint	chippkg;		/* chip package option */
-+	uint    sonicsrev;		/* sonics backplane rev */
-+};
-+
-+typedef const struct sb_pub  sb_t;
-+
-+/*
-+ * Many of the routines below take an 'sbh' handle as their first arg.
-+ * Allocate this by calling sb_attach().  Free it by calling sb_detach().
-+ * At any one time, the sbh is logically focused on one particular sb core
-+ * (the "current core").
-+ * Use sb_setcore() or sb_setcoreidx() to change the association to another core.
-+ */
-+
-+/* exported externs */
-+extern sb_t * BCMINIT(sb_attach)(uint pcidev, osl_t *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
-+extern sb_t * BCMINIT(sb_kattach)(void);
-+extern void sb_detach(sb_t *sbh);
-+extern uint BCMINIT(sb_chip)(sb_t *sbh);
-+extern uint BCMINIT(sb_chiprev)(sb_t *sbh);
-+extern uint BCMINIT(sb_chipcrev)(sb_t *sbh);
-+extern uint BCMINIT(sb_chippkg)(sb_t *sbh);
-+extern uint BCMINIT(sb_pcirev)(sb_t *sbh);
-+extern bool BCMINIT(sb_war16165)(sb_t *sbh);
-+extern uint BCMINIT(sb_boardvendor)(sb_t *sbh);
-+extern uint BCMINIT(sb_boardtype)(sb_t *sbh);
-+extern uint sb_bus(sb_t *sbh);
-+extern uint sb_buscoretype(sb_t *sbh);
-+extern uint sb_buscorerev(sb_t *sbh);
-+extern uint sb_corelist(sb_t *sbh, uint coreid[]);
-+extern uint sb_coreid(sb_t *sbh);
-+extern uint sb_coreidx(sb_t *sbh);
-+extern uint sb_coreunit(sb_t *sbh);
-+extern uint sb_corevendor(sb_t *sbh);
-+extern uint sb_corerev(sb_t *sbh);
-+extern void *sb_osh(sb_t *sbh);
-+extern void *sb_coreregs(sb_t *sbh);
-+extern uint32 sb_coreflags(sb_t *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val);
-+extern bool sb_iscoreup(sb_t *sbh);
-+extern void *sb_setcoreidx(sb_t *sbh, uint coreidx);
-+extern void *sb_setcore(sb_t *sbh, uint coreid, uint coreunit);
-+extern int sb_corebist(sb_t *sbh, uint coreid, uint coreunit);
-+extern void sb_commit(sb_t *sbh);
-+extern uint32 sb_base(uint32 admatch);
-+extern uint32 sb_size(uint32 admatch);
-+extern void sb_core_reset(sb_t *sbh, uint32 bits);
-+extern void sb_core_tofixup(sb_t *sbh);
-+extern void sb_core_disable(sb_t *sbh, uint32 bits);
-+extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m);
-+extern uint32 sb_clock(sb_t *sbh);
-+extern void sb_pci_setup(sb_t *sbh, uint coremask);
-+extern void sb_watchdog(sb_t *sbh, uint ticks);
-+extern void *sb_gpiosetcore(sb_t *sbh);
-+extern uint32 sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-+extern uint32 sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-+extern uint32 sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-+extern uint32 sb_gpioin(sb_t *sbh);
-+extern uint32 sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-+extern uint32 sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-+extern uint32 sb_gpioled(sb_t *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_gpioreserve(sb_t *sbh, uint32 gpio_num, uint8 priority);
-+extern uint32 sb_gpiorelease(sb_t *sbh, uint32 gpio_num, uint8 priority);
-+
-+extern void sb_clkctl_init(sb_t *sbh);
-+extern uint16 sb_clkctl_fast_pwrup_delay(sb_t *sbh);
-+extern bool sb_clkctl_clk(sb_t *sbh, uint mode);
-+extern int sb_clkctl_xtal(sb_t *sbh, uint what, bool on);
-+extern void sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn,
-+	void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg);
-+extern uint32 sb_set_initiator_to(sb_t *sbh, uint32 to);
-+extern void sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice, 
-+	uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif);
-+extern uint32 sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 val);
-+
-+
-+
-+/*
-+* Build device path. Path size must be >= SB_DEVPATH_BUFSZ.
-+* The returned path is NULL terminated and has trailing '/'.
-+* Return 0 on success, nonzero otherwise.
-+*/
-+extern int sb_devpath(sb_t *sbh, char *path, int size);
-+
-+/* clkctl xtal what flags */
-+#define	XTAL		0x1			/* primary crystal oscillator (2050) */
-+#define	PLL		0x2			/* main chip pll */
-+
-+/* clkctl clk mode */
-+#define	CLK_FAST	0			/* force fast (pll) clock */
-+#define	CLK_DYNAMIC	2			/* enable dynamic clock control */
-+
-+
-+/* GPIO usage priorities */
-+#define GPIO_DRV_PRIORITY	0
-+#define GPIO_APP_PRIORITY	1
-+
-+/* device path */
-+#define SB_DEVPATH_BUFSZ	16	/* min buffer size in bytes */
-+
-+#endif	/* _sbutils_h_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/sflash.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/sflash.h
---- linux-2.6.16/arch/mips/bcm947xx/include/sflash.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/sflash.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,36 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2005, Broadcom Corporation      
-+ * All Rights Reserved.      
-+ *       
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _sflash_h_
-+#define _sflash_h_
-+
-+#include <typedefs.h>
-+#include <sbchipc.h>
-+
-+struct sflash {
-+	uint blocksize;		/* Block size */
-+	uint numblocks;		/* Number of blocks */
-+	uint32 type;		/* Type */
-+	uint size;		/* Total size in bytes */
-+};
-+
-+/* Utility functions */
-+extern int sflash_poll(chipcregs_t *cc, uint offset);
-+extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf);
-+extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf);
-+extern int sflash_erase(chipcregs_t *cc, uint offset);
-+extern int sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf);
-+extern struct sflash * sflash_init(chipcregs_t *cc);
-+
-+#endif /* _sflash_h_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/trxhdr.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/trxhdr.h
---- linux-2.6.16/arch/mips/bcm947xx/include/trxhdr.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/trxhdr.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,33 @@
-+/*
-+ * TRX image file header format.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */ 
-+
-+#include <typedefs.h>
-+
-+#define TRX_MAGIC	0x30524448	/* "HDR0" */
-+#define TRX_VERSION	1
-+#define TRX_MAX_LEN	0x3A0000
-+#define TRX_NO_HEADER	1		/* Do not write TRX header */	
-+#define TRX_GZ_FILES	0x2     /* Contains up to TRX_MAX_OFFSET individual gzip files */
-+#define TRX_MAX_OFFSET	3
-+
-+struct trx_header {
-+	uint32 magic;		/* "HDR0" */
-+	uint32 len;		/* Length of file including header */
-+	uint32 crc32;		/* 32-bit CRC from flag_version to end of file */
-+	uint32 flag_version;	/* 0:15 flags, 16:31 version */
-+	uint32 offsets[TRX_MAX_OFFSET];	/* Offsets of partitions from start of header */
-+};
-+
-+/* Compatibility */
-+typedef struct trx_header TRXHDR, *PTRXHDR;
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/include/typedefs.h linux-2.6.16-owrt/arch/mips/bcm947xx/include/typedefs.h
---- linux-2.6.16/arch/mips/bcm947xx/include/typedefs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/include/typedefs.h	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,326 @@
-+/*
-+ * Copyright 2005, Broadcom Corporation      
-+ * All Rights Reserved.      
-+ *       
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
-+ * $Id$
-+ */
-+
-+#ifndef _TYPEDEFS_H_
-+#define _TYPEDEFS_H_
-+
-+
-+/* Define 'SITE_TYPEDEFS' in the compile to include a site specific
-+ * typedef file "site_typedefs.h".
-+ *
-+ * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs"
-+ * section of this file makes inferences about the compile environment
-+ * based on defined symbols and possibly compiler pragmas.
-+ *
-+ * Following these two sections is the "Default Typedefs"
-+ * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is
-+ * defined. This section has a default set of typedefs and a few
-+ * proprocessor symbols (TRUE, FALSE, NULL, ...).
-+ */
-+
-+#ifdef SITE_TYPEDEFS
-+
-+/*******************************************************************************
-+ * Site Specific Typedefs
-+ *******************************************************************************/
-+
-+#include "site_typedefs.h"
-+
-+#else
-+
-+/*******************************************************************************
-+ * Inferred Typedefs
-+ *******************************************************************************/
-+
-+/* Infer the compile environment based on preprocessor symbols and pramas.
-+ * Override type definitions as needed, and include configuration dependent
-+ * header files to define types.
-+ */
-+
-+#ifdef __cplusplus
-+
-+#define TYPEDEF_BOOL
-+#ifndef FALSE
-+#define FALSE	false
-+#endif
-+#ifndef TRUE
-+#define TRUE	true
-+#endif
-+
-+#else	/* ! __cplusplus */
-+
-+#if defined(_WIN32)
-+
-+#define TYPEDEF_BOOL
-+typedef	unsigned char	bool;			/* consistent w/BOOL */
-+
-+#endif /* _WIN32 */
-+
-+#endif	/* ! __cplusplus */
-+
-+/* use the Windows ULONG_PTR type when compiling for 64 bit */
-+#if defined(_WIN64)
-+#include <basetsd.h>
-+#define TYPEDEF_UINTPTR
-+typedef ULONG_PTR	uintptr;
-+#endif
-+
-+#ifdef _HNDRTE_
-+typedef long unsigned int size_t;
-+#endif
-+
-+#ifdef _MSC_VER	    /* Microsoft C */
-+#define TYPEDEF_INT64
-+#define TYPEDEF_UINT64
-+typedef signed __int64	int64;
-+typedef unsigned __int64 uint64;
-+#endif
-+
-+#if defined(MACOSX) && defined(KERNEL)
-+#define TYPEDEF_BOOL
-+#endif
-+
-+
-+#if defined(linux)
-+#define TYPEDEF_UINT
-+#define TYPEDEF_USHORT
-+#define TYPEDEF_ULONG
-+#endif
-+
-+#if !defined(linux) && !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) && !defined(_HNDRTE_) && !defined(_MINOSL_)
-+#define TYPEDEF_UINT
-+#define TYPEDEF_USHORT
-+#endif
-+
-+
-+/* Do not support the (u)int64 types with strict ansi for GNU C */
-+#if defined(__GNUC__) && defined(__STRICT_ANSI__)
-+#define TYPEDEF_INT64
-+#define TYPEDEF_UINT64
-+#endif
-+
-+/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode
-+ * for singned or unsigned */
-+#if defined(__ICL)
-+
-+#define TYPEDEF_INT64
-+
-+#if defined(__STDC__)
-+#define TYPEDEF_UINT64
-+#endif
-+
-+#endif /* __ICL */
-+
-+
-+#if !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) && !defined(_HNDRTE_) && !defined(_MINOSL_)
-+
-+/* pick up ushort & uint from standard types.h */
-+#if defined(linux) && defined(__KERNEL__)
-+
-+#include <linux/types.h>	/* sys/types.h and linux/types.h are oil and water */
-+
-+#else
-+
-+#include <sys/types.h>	
-+
-+#endif
-+
-+#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_  && !_MINOSL_ */
-+
-+#if defined(MACOSX) && defined(KERNEL)
-+#include <IOKit/IOTypes.h>
-+#endif
-+
-+
-+/* use the default typedefs in the next section of this file */
-+#define USE_TYPEDEF_DEFAULTS
-+
-+#endif /* SITE_TYPEDEFS */
-+
-+
-+/*******************************************************************************
-+ * Default Typedefs
-+ *******************************************************************************/
-+
-+#ifdef USE_TYPEDEF_DEFAULTS
-+#undef USE_TYPEDEF_DEFAULTS
-+
-+#ifndef TYPEDEF_BOOL
-+typedef	/*@abstract@*/ unsigned char	bool;
-+#endif
-+
-+/*----------------------- define uchar, ushort, uint, ulong ------------------*/
-+
-+#ifndef TYPEDEF_UCHAR
-+typedef unsigned char	uchar;
-+#endif
-+
-+#ifndef TYPEDEF_USHORT
-+typedef unsigned short	ushort;
-+#endif
-+
-+#ifndef TYPEDEF_UINT
-+typedef unsigned int	uint;
-+#endif
-+
-+#ifndef TYPEDEF_ULONG
-+typedef unsigned long	ulong;
-+#endif
-+
-+/*----------------------- define [u]int8/16/32/64, uintptr --------------------*/
-+
-+#ifndef TYPEDEF_UINT8
-+typedef unsigned char	uint8;
-+#endif
-+
-+#ifndef TYPEDEF_UINT16
-+typedef unsigned short	uint16;
-+#endif
-+
-+#ifndef TYPEDEF_UINT32
-+typedef unsigned int	uint32;
-+#endif
-+
-+#ifndef TYPEDEF_UINT64
-+typedef unsigned long long uint64;
-+#endif
-+
-+#ifndef TYPEDEF_UINTPTR
-+typedef unsigned int	uintptr;
-+#endif
-+
-+#ifndef TYPEDEF_INT8
-+typedef signed char	int8;
-+#endif
-+
-+#ifndef TYPEDEF_INT16
-+typedef signed short	int16;
-+#endif
-+
-+#ifndef TYPEDEF_INT32
-+typedef signed int	int32;
-+#endif
-+
-+#ifndef TYPEDEF_INT64
-+typedef signed long long int64;
-+#endif
-+
-+/*----------------------- define float32/64, float_t -----------------------*/
-+
-+#ifndef TYPEDEF_FLOAT32
-+typedef float		float32;
-+#endif
-+
-+#ifndef TYPEDEF_FLOAT64
-+typedef double		float64;
-+#endif
-+
-+/*
-+ * abstracted floating point type allows for compile time selection of
-+ * single or double precision arithmetic.  Compiling with -DFLOAT32
-+ * selects single precision; the default is double precision.
-+ */
-+
-+#ifndef TYPEDEF_FLOAT_T
-+
-+#if defined(FLOAT32)
-+typedef float32 float_t;
-+#else /* default to double precision floating point */
-+typedef float64 float_t;
-+#endif
-+
-+#endif /* TYPEDEF_FLOAT_T */
-+
-+/*----------------------- define macro values -----------------------------*/
-+
-+#ifndef FALSE
-+#define FALSE	0
-+#endif
-+
-+#ifndef TRUE
-+#define TRUE	1
-+#endif
-+
-+#ifndef NULL
-+#define	NULL	0
-+#endif
-+
-+#ifndef OFF
-+#define	OFF	0
-+#endif
-+
-+#ifndef ON
-+#define	ON	1
-+#endif
-+
-+#define	AUTO	(-1)
-+
-+/* Reclaiming text and data :
-+   The following macros specify special linker sections that can be reclaimed
-+   after a system is considered 'up'.
-+ */ 
-+#if defined(__GNUC__) && defined(BCMRECLAIM)
-+extern bool	bcmreclaimed;
-+#define BCMINITDATA(_data)	__attribute__ ((__section__ (".dataini." #_data))) _data##_ini		
-+#define BCMINITFN(_fn)		__attribute__ ((__section__ (".textini." #_fn))) _fn##_ini
-+#define BCMINIT(_id)		_id##_ini
-+#else 
-+#define BCMINITDATA(_data)	_data		
-+#define BCMINITFN(_fn)		_fn
-+#define BCMINIT(_id)		_id
-+#define bcmreclaimed		0
-+#endif
-+
-+/*----------------------- define PTRSZ, INLINE ----------------------------*/
-+
-+#ifndef PTRSZ
-+#define	PTRSZ	sizeof (char*)
-+#endif
-+
-+#ifndef INLINE
-+
-+#ifdef _MSC_VER
-+
-+#define INLINE __inline
-+
-+#elif __GNUC__
-+
-+#define INLINE __inline__
-+
-+#else
-+
-+#define INLINE
-+
-+#endif /* _MSC_VER */
-+
-+#endif /* INLINE */
-+
-+#undef TYPEDEF_BOOL
-+#undef TYPEDEF_UCHAR
-+#undef TYPEDEF_USHORT
-+#undef TYPEDEF_UINT
-+#undef TYPEDEF_ULONG
-+#undef TYPEDEF_UINT8
-+#undef TYPEDEF_UINT16
-+#undef TYPEDEF_UINT32
-+#undef TYPEDEF_UINT64
-+#undef TYPEDEF_UINTPTR
-+#undef TYPEDEF_INT8
-+#undef TYPEDEF_INT16
-+#undef TYPEDEF_INT32
-+#undef TYPEDEF_INT64
-+#undef TYPEDEF_FLOAT32
-+#undef TYPEDEF_FLOAT64
-+#undef TYPEDEF_FLOAT_T
-+
-+#endif /* USE_TYPEDEF_DEFAULTS */
-+
-+#endif /* _TYPEDEFS_H_ */
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/int-handler.S linux-2.6.16-owrt/arch/mips/bcm947xx/int-handler.S
---- linux-2.6.16/arch/mips/bcm947xx/int-handler.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/int-handler.S	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,48 @@
-+/*
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <asm/asm.h>
-+#include <asm/mipsregs.h>
-+#include <asm/regdef.h>
-+#include <asm/stackframe.h>
-+
-+	.text
-+	.set	noreorder
-+	.set	noat
-+	.align	5
-+
-+	NESTED(bcm47xx_irq_handler, PT_SIZE, sp)
-+	SAVE_ALL
-+	CLI
-+
-+	.set	at
-+	.set    noreorder
-+
-+	jal	bcm47xx_irq_dispatch
-+	move	a0, sp
-+
-+	j	ret_from_irq
-+	nop
-+		
-+	END(bcm47xx_irq_handler)
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/irq.c linux-2.6.16-owrt/arch/mips/bcm947xx/irq.c
---- linux-2.6.16/arch/mips/bcm947xx/irq.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/irq.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,67 @@
-+/*
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/module.h>
-+#include <linux/smp.h>
-+#include <linux/types.h>
-+
-+#include <asm/cpu.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/irq_cpu.h>
-+
-+extern asmlinkage void bcm47xx_irq_handler(void);
-+
-+void bcm47xx_irq_dispatch(struct pt_regs *regs)
-+{
-+	u32 cause;
-+
-+	cause = read_c0_cause() & read_c0_status() & CAUSEF_IP;
-+
-+	clear_c0_status(cause);
-+
-+	if (cause & CAUSEF_IP7)
-+		do_IRQ(7, regs);
-+	if (cause & CAUSEF_IP2)
-+		do_IRQ(2, regs);
-+	if (cause & CAUSEF_IP3)
-+		do_IRQ(3, regs);
-+	if (cause & CAUSEF_IP4)
-+		do_IRQ(4, regs);
-+	if (cause & CAUSEF_IP5)
-+		do_IRQ(5, regs);
-+	if (cause & CAUSEF_IP6)
-+		do_IRQ(6, regs);
-+}
-+
-+void __init arch_init_irq(void)
-+{
-+	set_except_vector(0, bcm47xx_irq_handler);
-+	mips_cpu_irq_init(0);
-+}
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/Makefile linux-2.6.16-owrt/arch/mips/bcm947xx/Makefile
---- linux-2.6.16/arch/mips/bcm947xx/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/Makefile	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,6 @@
-+#
-+# Makefile for the BCM47xx specific kernel interface routines
-+# under Linux.
-+#
-+
-+obj-y := irq.o int-handler.o prom.o setup.o time.o pci.o
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/pci.c linux-2.6.16-owrt/arch/mips/bcm947xx/pci.c
---- linux-2.6.16/arch/mips/bcm947xx/pci.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/pci.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,215 @@
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+#include <linux/types.h>
-+
-+#include <asm/cpu.h>
-+#include <asm/io.h>
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <sbutils.h>
-+#include <sbmips.h>
-+#include <sbconfig.h>
-+#include <sbpci.h>
-+#include <bcmdevs.h>
-+#include <pcicfg.h>
-+
-+extern sb_t *sbh;
-+extern spinlock_t sbh_lock;
-+
-+
-+static int
-+sb_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-+				int reg, int size, u32 *val)
-+{
-+	int ret;
-+	unsigned long flags;
-+	
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	ret = sbpci_read_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, val, size);
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+
-+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int
-+sb_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-+				int reg, int size, u32 val)
-+{
-+	int ret;
-+	unsigned long flags;
-+	
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	ret = sbpci_write_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, &val, size);
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+
-+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-+}
-+
-+
-+static struct pci_ops sb_pci_ops = {
-+	.read   = sb_pci_read_config,
-+	.write  = sb_pci_write_config,
-+};
-+
-+static struct resource sb_pci_mem_resource = {
-+	.name   = "SB PCI Memory resources",
-+	.start  = SB_ENUM_BASE,
-+	.end    = SB_ENUM_LIM - 1,
-+	.flags  = IORESOURCE_MEM,
-+};
-+
-+static struct resource sb_pci_io_resource = {
-+	.name   = "SB PCI I/O resources",
-+	.start  = 0x000,
-+	.end    = 0x0FF,
-+	.flags  = IORESOURCE_IO,
-+};
-+
-+static struct pci_controller bcm47xx_sb_pci_controller = {
-+	.pci_ops        = &sb_pci_ops,
-+	.mem_resource   = &sb_pci_mem_resource,
-+	.io_resource    = &sb_pci_io_resource,
-+};
-+
-+static struct resource ext_pci_mem_resource = {
-+	.name   = "Ext PCI Memory resources",
-+	.start  = 0x40000000,
-+	.end    = 0x7fffffff,
-+	.flags  = IORESOURCE_MEM,
-+};
-+
-+static struct resource ext_pci_io_resource = {
-+	.name   = "Ext PCI I/O resources",
-+	.start  = 0x100,
-+	.end    = 0x1FF,
-+	.flags  = IORESOURCE_IO,
-+};
-+
-+static struct pci_controller bcm47xx_ext_pci_controller = {
-+	.pci_ops        = &sb_pci_ops,
-+	.io_resource    = &ext_pci_io_resource,
-+	.mem_resource   = &ext_pci_mem_resource,
-+	.mem_offset		= 0x24000000,
-+};
-+
-+void bcm47xx_pci_init(void)
-+{
-+	unsigned long flags;
-+	
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	sbpci_init(sbh);
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+
-+	set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000));
-+
-+	register_pci_controller(&bcm47xx_sb_pci_controller);
-+	register_pci_controller(&bcm47xx_ext_pci_controller);
-+}
-+
-+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	u8 irq;
-+	
-+	if (dev->bus->number == 1)
-+		return 2;
-+
-+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
-+	return irq + 2;
-+}
-+
-+u32 pci_iobase = 0x100;
-+u32 pci_membase = SB_PCI_DMA;
-+
-+static void bcm47xx_fixup_device(struct pci_dev *d)
-+{
-+	struct resource *res;
-+	int pos, size;
-+	u32 *base;
-+
-+	if (d->bus->number == 0)
-+		return;
-+	
-+	printk("PCI: Fixing up device %s\n", pci_name(d));
-+
-+	/* Fix up resource bases */
-+	for (pos = 0; pos < 6; pos++) {
-+		res = &d->resource[pos];
-+		base = ((res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase);
-+		if (res->end) {
-+			size = res->end - res->start + 1;
-+			if (*base & (size - 1))
-+				*base = (*base + size) & ~(size - 1);
-+			res->start = *base;
-+			res->end = res->start + size - 1;
-+			*base += size;
-+			pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
-+		}
-+		/* Fix up PCI bridge BAR0 only */
-+		if (d->bus->number == 1 && PCI_SLOT(d->devfn) == 0)
-+			break;
-+	}
-+	/* Fix up interrupt lines */
-+	if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))
-+		d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq;
-+	pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
-+}
-+
-+
-+static void bcm47xx_fixup_bridge(struct pci_dev *dev)
-+{
-+	if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0)
-+		return;
-+	
-+	printk("PCI: fixing up bridge\n");
-+
-+	/* Enable PCI bridge bus mastering and memory space */
-+	pci_set_master(dev);
-+	pcibios_enable_device(dev, ~0);
-+	
-+	/* Enable PCI bridge BAR1 prefetch and burst */
-+	pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3);
-+}
-+
-+/* Do platform specific device initialization at pci_enable_device() time */
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+	uint coreidx;
-+	unsigned long flags;
-+	
-+	bcm47xx_fixup_device(dev);
-+
-+	/* These cores come out of reset enabled */
-+	if ((dev->bus->number != 0) ||
-+		(dev->device == SB_MIPS) ||
-+		(dev->device == SB_MIPS33) ||
-+		(dev->device == SB_EXTIF) ||
-+		(dev->device == SB_CC))
-+		return 0;
-+
-+	/* Do a core reset */
-+	spin_lock_irqsave(&sbh_lock, flags);
-+	coreidx = sb_coreidx(sbh);
-+	if (sb_setcoreidx(sbh, PCI_SLOT(dev->devfn)) && (sb_coreid(sbh) == SB_USB)) {
-+		/* 
-+		 * The USB core requires a special bit to be set during core
-+		 * reset to enable host (OHCI) mode. Resetting the SB core in
-+		 * pcibios_enable_device() is a hack for compatibility with
-+		 * vanilla usb-ohci so that it does not have to know about
-+		 * SB. A driver that wants to use the USB core in device mode
-+		 * should know about SB and should reset the bit back to 0
-+		 * after calling pcibios_enable_device().
-+		 */
-+		sb_core_disable(sbh, sb_coreflags(sbh, 0, 0));
-+		sb_core_reset(sbh, 1 << 29);
-+	} else {
-+		sb_core_reset(sbh, 0);
-+	}
-+	sb_setcoreidx(sbh, coreidx);
-+	spin_unlock_irqrestore(&sbh_lock, flags);
-+	
-+	return 0;
-+}
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcm47xx_fixup_bridge);
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/prom.c linux-2.6.16-owrt/arch/mips/bcm947xx/prom.c
---- linux-2.6.16/arch/mips/bcm947xx/prom.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/prom.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,59 @@
-+/*
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/sched.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <asm/pmon.h>
-+
-+const char *get_system_type(void)
-+{
-+	return "Broadcom BCM47xx";
-+}
-+
-+void __init prom_init(void)
-+{
-+	unsigned long mem;
-+
-+        mips_machgroup = MACH_GROUP_BRCM;
-+        mips_machtype = MACH_BCM47XX;
-+
-+	/* Figure out memory size by finding aliases */
-+	for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
-+		if (*(unsigned long *)((unsigned long)(prom_init) + mem) == 
-+		    *(unsigned long *)(prom_init))
-+			break;
-+	}
-+
-+	add_memory_region(0, mem, BOOT_MEM_RAM);
-+}
-+
-+unsigned long __init prom_free_prom_memory(void)
-+{
-+	return 0;
-+}
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/setup.c linux-2.6.16-owrt/arch/mips/bcm947xx/setup.c
---- linux-2.6.16/arch/mips/bcm947xx/setup.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/setup.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,158 @@
-+/*
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
-+ *  Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/types.h>
-+#include <linux/tty.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial_reg.h>
-+#include <asm/bootinfo.h>
-+#include <asm/time.h>
-+#include <asm/reboot.h>
-+#include <linux/pm.h>
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <sbutils.h>
-+#include <sbmips.h>
-+#include <sbpci.h>
-+#include <sbconfig.h>
-+#include <bcmdevs.h>
-+#include <bcmutils.h>
-+#include <bcmnvram.h>
-+
-+extern void bcm47xx_pci_init(void);
-+extern void bcm47xx_time_init(void);
-+extern void bcm47xx_timer_setup(struct irqaction *irq);
-+void *sbh;
-+spinlock_t sbh_lock = SPIN_LOCK_UNLOCKED;
-+int boardflags;
-+
-+static int ser_line = 0;
-+
-+typedef struct {
-+	void *regs;
-+	uint irq;
-+	uint baud_base;
-+	uint reg_shift;
-+} serial_port;
-+
-+static serial_port ports[4];
-+static int num_ports = 0;
-+
-+static void
-+serial_add(void *regs, uint irq, uint baud_base, uint reg_shift)
-+{
-+	ports[num_ports].regs = regs;
-+	ports[num_ports].irq = irq;
-+	ports[num_ports].baud_base = baud_base;
-+	ports[num_ports].reg_shift = reg_shift;
-+	num_ports++;
-+}
-+
-+static void
-+do_serial_add(serial_port *port)
-+{
-+	void *regs;
-+	uint irq;
-+	uint baud_base;
-+	uint reg_shift;
-+	struct uart_port s;
-+	
-+	regs = port->regs;
-+	irq = port->irq;
-+	baud_base = port->baud_base;
-+	reg_shift = port->reg_shift;
-+
-+	memset(&s, 0, sizeof(s));
-+
-+	s.line = ser_line++;
-+	s.membase = regs;
-+	s.irq = irq + 2;
-+	s.uartclk = baud_base;
-+	s.flags = ASYNC_BOOT_AUTOCONF;
-+	s.iotype = SERIAL_IO_MEM;
-+	s.regshift = reg_shift;
-+
-+	if (early_serial_setup(&s) != 0) {
-+		printk(KERN_ERR "Serial setup failed!\n");
-+	}
-+}
-+
-+static void bcm47xx_machine_restart(char *command)
-+{
-+	printk("Please stand by while rebooting the system...\n");
-+	 
-+	/* Set the watchdog timer to reset immediately */
-+	local_irq_disable();
-+	sb_watchdog(sbh, 1);
-+	while (1);
-+}
-+
-+static void bcm47xx_machine_halt(void)
-+{
-+	/* Disable interrupts and watchdog and spin forever */
-+	local_irq_disable();
-+	sb_watchdog(sbh, 0);
-+	while (1);
-+}
-+
-+void __init plat_setup(void)
-+{
-+	char *s;
-+	int i;
-+	
-+	sbh = (void *) sb_kattach();
-+	sb_mips_init(sbh);
-+
-+	bcm47xx_pci_init();
-+
-+	sb_serial_init(sbh, serial_add);
-+	boardflags = getintvar(NULL, "boardflags");
-+
-+	/* reverse serial ports if the nvram variable kernel_args starts with console=ttyS1 */
-+	s = early_nvram_get("kernel_args");
-+	if (!s)	s = "";
-+	if (!strncmp(s, "console=ttyS1", 13)) {
-+		for (i = num_ports; i; i--)
-+			do_serial_add(&ports[i - 1]);
-+	} else {
-+		for (i = 0; i < num_ports; i++)
-+			do_serial_add(&ports[i]);
-+	}
-+	
-+	_machine_restart = bcm47xx_machine_restart;
-+	_machine_halt = bcm47xx_machine_halt;
-+	pm_power_off = bcm47xx_machine_halt;
-+	
-+	board_time_init = bcm47xx_time_init;
-+	board_timer_setup = bcm47xx_timer_setup;
-+}
-+
-+EXPORT_SYMBOL(sbh);
-+EXPORT_SYMBOL(sbh_lock);
-+EXPORT_SYMBOL(boardflags);
-diff -Nur linux-2.6.16/arch/mips/bcm947xx/time.c linux-2.6.16-owrt/arch/mips/bcm947xx/time.c
---- linux-2.6.16/arch/mips/bcm947xx/time.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/bcm947xx/time.c	2006-03-21 09:31:00.000000000 +0100
-@@ -0,0 +1,59 @@
-+/*
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/serial_reg.h>
-+#include <linux/interrupt.h>
-+#include <asm/addrspace.h>
-+#include <asm/io.h>
-+#include <asm/time.h>
-+
-+void __init
-+bcm47xx_time_init(void)
-+{
-+	unsigned int hz;
-+
-+	/*
-+	 * Use deterministic values for initial counter interrupt
-+	 * so that calibrate delay avoids encountering a counter wrap.
-+	 */
-+	write_c0_count(0);
-+	write_c0_compare(0xffff);
-+
-+	hz = 200 * 1000 * 1000;
-+
-+	/* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
-+	mips_hpt_frequency = hz / 2;
-+
-+}
-+
-+void __init
-+bcm47xx_timer_setup(struct irqaction *irq)
-+{
-+	/* Enable the timer interrupt */
-+	setup_irq(7, irq);
-+}
-diff -Nur linux-2.6.16/arch/mips/Kconfig linux-2.6.16-owrt/arch/mips/Kconfig
---- linux-2.6.16/arch/mips/Kconfig	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/Kconfig	2006-03-21 09:31:00.000000000 +0100
-@@ -244,6 +244,17 @@
- 	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
- 	 Olivetti M700-10 workstations.
- 
-+config BCM947XX
-+	bool "Support for BCM947xx based boards"
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SYS_SUPPORTS_LITTLE_ENDIAN
-+	help
-+	 Support for BCM947xx based boards
-+
- config LASAT
- 	bool "Support for LASAT Networks platforms"
- 	select DMA_NONCOHERENT
-diff -Nur linux-2.6.16/arch/mips/kernel/cpu-probe.c linux-2.6.16-owrt/arch/mips/kernel/cpu-probe.c
---- linux-2.6.16/arch/mips/kernel/cpu-probe.c	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/kernel/cpu-probe.c	2006-03-21 09:32:48.000000000 +0100
-@@ -678,6 +678,28 @@
- }
- 
- 
-+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
-+{
-+	decode_config1(c);
-+	switch (c->processor_id & 0xff00) {
-+		case PRID_IMP_BCM3302:
-+			c->cputype = CPU_BCM3302;
-+			c->isa_level = MIPS_CPU_ISA_M32R1;
-+			c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-+					MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER;
-+		break;
-+		case PRID_IMP_BCM4710:
-+			c->cputype = CPU_BCM4710;
-+			c->isa_level = MIPS_CPU_ISA_M32R1;
-+			c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-+					MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER;
-+		break;
-+	default:
-+		c->cputype = CPU_UNKNOWN;
-+		break;
-+	}
-+}
-+
- __init void cpu_probe(void)
- {
- 	struct cpuinfo_mips *c = &current_cpu_data;
-@@ -700,6 +722,9 @@
- 	case PRID_COMP_SIBYTE:
- 		cpu_probe_sibyte(c);
- 		break;
-+	case PRID_COMP_BROADCOM:
-+		cpu_probe_broadcom(c);
-+		break;
- 	case PRID_COMP_SANDCRAFT:
- 		cpu_probe_sandcraft(c);
- 		break;
-diff -Nur linux-2.6.16/arch/mips/kernel/head.S linux-2.6.16-owrt/arch/mips/kernel/head.S
---- linux-2.6.16/arch/mips/kernel/head.S	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/kernel/head.S	2006-03-21 09:31:00.000000000 +0100
-@@ -107,6 +107,14 @@
- #endif
- 	.endm
- 
-+#ifdef CONFIG_BCM4710
-+#undef eret
-+#define eret nop; nop; eret
-+#endif
-+
-+	j	kernel_entry
-+	nop
-+
- 	/*
- 	 * Reserved space for exception handlers.
- 	 * Necessary for machines which link their kernels at KSEG0.
-diff -Nur linux-2.6.16/arch/mips/kernel/proc.c linux-2.6.16-owrt/arch/mips/kernel/proc.c
---- linux-2.6.16/arch/mips/kernel/proc.c	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/kernel/proc.c	2006-03-21 09:31:00.000000000 +0100
-@@ -82,6 +82,8 @@
- 	[CPU_VR4181]	= "NEC VR4181",
- 	[CPU_VR4181A]	= "NEC VR4181A",
- 	[CPU_SR71000]	= "Sandcraft SR71000",
-+	[CPU_BCM3302]	= "Broadcom BCM3302",
-+	[CPU_BCM4710]	= "Broadcom BCM4710",
- 	[CPU_PR4450]	= "Philips PR4450",
- };
- 
-diff -Nur linux-2.6.16/arch/mips/Makefile linux-2.6.16-owrt/arch/mips/Makefile
---- linux-2.6.16/arch/mips/Makefile	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/Makefile	2006-03-21 09:31:00.000000000 +0100
-@@ -710,6 +710,13 @@
- load-$(CONFIG_SIBYTE_BIGSUR)	:= 0xffffffff80100000
- 
- #
-+# Broadcom BCM47XX boards
-+#
-+core-$(CONFIG_BCM947XX)		+= arch/mips/bcm947xx/ arch/mips/bcm947xx/broadcom/
-+cflags-$(CONFIG_BCM947XX)	+= -Iarch/mips/bcm947xx/include
-+load-$(CONFIG_BCM947XX)		:= 0xffffffff80001000
-+
-+#
- # SNI RM200 PCI
- #
- core-$(CONFIG_SNI_RM200_PCI)	+= arch/mips/sni/
-diff -Nur linux-2.6.16/arch/mips/mm/tlbex.c linux-2.6.16-owrt/arch/mips/mm/tlbex.c
---- linux-2.6.16/arch/mips/mm/tlbex.c	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/arch/mips/mm/tlbex.c	2006-03-21 09:31:00.000000000 +0100
-@@ -858,6 +858,8 @@
- 	case CPU_4KSC:
- 	case CPU_20KC:
- 	case CPU_25KF:
-+	case CPU_BCM3302:
-+	case CPU_BCM4710:
- 		tlbw(p);
- 		break;
- 
-diff -Nur linux-2.6.16/include/asm-mips/bootinfo.h linux-2.6.16-owrt/include/asm-mips/bootinfo.h
---- linux-2.6.16/include/asm-mips/bootinfo.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/bootinfo.h	2006-03-21 09:31:00.000000000 +0100
-@@ -218,6 +218,12 @@
- #define MACH_GROUP_TITAN       22	/* PMC-Sierra Titan		*/
- #define  MACH_TITAN_YOSEMITE	1	/* PMC-Sierra Yosemite		*/
- 
-+/*
-+ * Valid machtype for group Broadcom
-+ */
-+#define MACH_GROUP_BRCM		23	/* Broadcom			*/
-+#define MACH_BCM47XX		1	/* Broadcom BCM47xx		*/
-+
- #define CL_SIZE			COMMAND_LINE_SIZE
- 
- const char *get_system_type(void);
-diff -Nur linux-2.6.16/include/asm-mips/cpu.h linux-2.6.16-owrt/include/asm-mips/cpu.h
---- linux-2.6.16/include/asm-mips/cpu.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/include/asm-mips/cpu.h	2006-03-21 09:31:00.000000000 +0100
-@@ -102,6 +102,13 @@
- #define PRID_IMP_SR71000        0x0400
- 
- /*
-+ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
-+ */
-+
-+#define PRID_IMP_BCM4710	0x4000
-+#define PRID_IMP_BCM3302	0x9000
-+
-+/*
-  * Definitions for 7:0 on legacy processors
-  */
- 
-@@ -196,7 +203,9 @@
- #define CPU_34K			60
- #define CPU_PR4450		61
- #define CPU_SB1A		62
--#define CPU_LAST		62
-+#define CPU_BCM3302		63
-+#define CPU_BCM4710		64
-+#define CPU_LAST		64
- 
- /*
-  * ISA Level encodings
-diff -Nur linux-2.6.16/include/linux/init.h linux-2.6.16-owrt/include/linux/init.h
---- linux-2.6.16/include/linux/init.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/init.h	2006-03-21 09:31:00.000000000 +0100
-@@ -86,6 +86,8 @@
- 	static initcall_t __initcall_##fn __attribute_used__ \
- 	__attribute__((__section__(".initcall" level ".init"))) = fn
- 
-+#define early_initcall(fn)		__define_initcall(".early1",fn)
-+
- #define core_initcall(fn)		__define_initcall("1",fn)
- #define postcore_initcall(fn)		__define_initcall("2",fn)
- #define arch_initcall(fn)		__define_initcall("3",fn)
-diff -Nur linux-2.6.16/include/linux/pci_ids.h linux-2.6.16-owrt/include/linux/pci_ids.h
---- linux-2.6.16/include/linux/pci_ids.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/pci_ids.h	2006-03-21 09:31:00.000000000 +0100
-@@ -1885,6 +1885,7 @@
- #define PCI_DEVICE_ID_TIGON3_5901_2	0x170e
- #define PCI_DEVICE_ID_BCM4401		0x4401
- #define PCI_DEVICE_ID_BCM4401B0		0x4402
-+#define PCI_DEVICE_ID_BCM4713		0x4713
- 
- #define PCI_VENDOR_ID_TOPIC		0x151f
- #define PCI_DEVICE_ID_TOPIC_TP560	0x0000
diff --git a/openwrt/target/linux/brcm-2.6/patches/002-flash-map.patch b/openwrt/target/linux/brcm-2.6/patches/002-flash-map.patch
deleted file mode 100644
index b8aeafa602..0000000000
--- a/openwrt/target/linux/brcm-2.6/patches/002-flash-map.patch
+++ /dev/null
@@ -1,347 +0,0 @@
-diff -Nur linux-2.6.15-rc5/drivers/mtd/maps/bcm47xx-flash.c linux-2.6.15-rc5-flash/drivers/mtd/maps/bcm47xx-flash.c
---- linux-2.6.15-rc5/drivers/mtd/maps/bcm47xx-flash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-rc5-flash/drivers/mtd/maps/bcm47xx-flash.c	2005-12-19 00:33:31.276241000 +0100
-@@ -0,0 +1,316 @@
-+/*
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
-+ *
-+ *  original functions for finding root filesystem from Mike Baker 
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ * 
-+ *  Copyright 2001-2003, Broadcom Corporation
-+ *  All Rights Reserved.
-+ * 
-+ *  THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ *  KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ *  SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ *  FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ *  Flash mapping for BCM947XX boards
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/io.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#ifdef CONFIG_MTD_PARTITIONS
-+#include <linux/mtd/partitions.h>
-+#endif
-+#include <linux/config.h>
-+
-+#include <trxhdr.h>
-+
-+#define WINDOW_ADDR 0x1c000000
-+#define WINDOW_SIZE (0x400000*2)
-+#define BUSWIDTH 2
-+
-+static struct mtd_info *bcm947xx_mtd;
-+
-+static void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-+{
-+#define MIPS_MEMCPY_ALIGN 4
-+	map_word ret;
-+	ssize_t transfer;
-+	ssize_t done = 0;
-+	if ((len >= MIPS_MEMCPY_ALIGN) && (!(from & (MIPS_MEMCPY_ALIGN - 1))) && (!(((unsigned int)to & (MIPS_MEMCPY_ALIGN - 1))))) {
-+		done = len & ~(MIPS_MEMCPY_ALIGN - 1);
-+		memcpy_fromio(to, map->virt + from, done);
-+	}
-+	while (done < len) {
-+		ret = map->read(map, from + done);
-+		transfer = len - done;
-+		if (transfer > map->bankwidth)
-+			transfer = map->bankwidth;
-+		memcpy((void *)((unsigned long)to + done), &ret.x[0], transfer);
-+		done += transfer;
-+	}
-+}
-+
-+static struct map_info bcm947xx_map = {
-+	name: "Physically mapped flash",
-+	size: WINDOW_SIZE,
-+	bankwidth: BUSWIDTH,
-+	phys: WINDOW_ADDR,
-+};
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+
-+static struct mtd_partition bcm947xx_parts[] = {
-+	{ name: "cfe",	offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
-+	{ name: "linux", offset: 0, size: 0, },
-+	{ name: "rootfs", offset: 0, size: 0, },
-+	{ name: "nvram", offset: 0, size: 0, },
-+	{ name: "OpenWrt", offset: 0, size: 0, },
-+	{ name: NULL, },
-+};
-+
-+static int __init
-+find_cfe_size(struct mtd_info *mtd, size_t size)
-+{
-+	struct trx_header *trx;
-+	unsigned char buf[512];
-+	int off;
-+	size_t len;
-+	int cfe_size_flag;
-+
-+	trx = (struct trx_header *) buf;
-+
-+	cfe_size_flag=0;
-+
-+	for (off = (256*1024); off < size; off += mtd->erasesize) {
-+		memset(buf, 0xe5, sizeof(buf));
-+
-+		/*
-+		 * Read into buffer 
-+		 */
-+		if (MTD_READ(mtd, off, sizeof(buf), &len, buf) ||
-+		    len != sizeof(buf))
-+			continue;
-+
-+		/* found a TRX header */
-+		if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
-+			goto done;
-+		}
-+		cfe_size_flag += 1;
-+	}
-+
-+	printk(KERN_NOTICE
-+	       "%s: Couldn't find bootloader size\n",
-+	       mtd->name);
-+	return -1;
-+
-+ done:
-+	printk(KERN_NOTICE "bootloader size flag: %d\n", cfe_size_flag);
-+	return cfe_size_flag;
-+
-+}
-+
-+static int __init
-+find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
-+{
-+	struct trx_header *trx;
-+	unsigned char buf[512];
-+	int off;
-+	size_t len;
-+
-+	trx = (struct trx_header *) buf;
-+
-+	for (off = (256*1024); off < size; off += mtd->erasesize) {
-+		memset(buf, 0xe5, sizeof(buf));
-+
-+		/*
-+		 * Read into buffer 
-+		 */
-+		if (MTD_READ(mtd, off, sizeof(buf), &len, buf) ||
-+		    len != sizeof(buf))
-+			continue;
-+
-+		/* found a TRX header */
-+		if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
-+			part->offset = le32_to_cpu(trx->offsets[2]) ? : 
-+				le32_to_cpu(trx->offsets[1]);
-+			part->size = le32_to_cpu(trx->len); 
-+
-+			part->size -= part->offset;
-+			part->offset += off;
-+
-+			goto done;
-+		}
-+	}
-+
-+	printk(KERN_NOTICE
-+	       "%s: Couldn't find root filesystem\n",
-+	       mtd->name);
-+	return -1;
-+
-+ done:
-+	return part->size;
-+}
-+
-+struct mtd_partition * __init
-+init_mtd_partitions(struct mtd_info *mtd, size_t size)
-+{
-+
-+	int cfe_size_flag;
-+
-+	/* if cfe_size_flag=0, cfe size is 256 kb, else 384 kb */
-+	cfe_size_flag = find_cfe_size(mtd, size); 
-+
-+	/* boot loader */
-+	bcm947xx_parts[0].offset = 0;
-+	if (cfe_size_flag == 0) {
-+		bcm947xx_parts[0].size	 = 1024*256;
-+	} else {
-+		/* netgear wgt634u has 384 kb bootloader */
-+		bcm947xx_parts[0].size   = 1024*384;
-+	}
-+
-+	/* nvram */
-+	if (cfe_size_flag == 0) {
-+		bcm947xx_parts[3].offset = size - mtd->erasesize;
-+	} else {
-+		/* nvram (old 128kb config partition on netgear wgt634u) */
-+		bcm947xx_parts[3].offset = bcm947xx_parts[0].size;
-+	}
-+	bcm947xx_parts[3].size   = mtd->erasesize;
-+
-+	/* linux (kernel and rootfs) */
-+	if (cfe_size_flag == 0) {
-+		bcm947xx_parts[1].offset = bcm947xx_parts[0].size;
-+		bcm947xx_parts[1].size   = bcm947xx_parts[3].offset - 
-+			bcm947xx_parts[1].offset;
-+	} else {
-+		/* do not count the elf loader, which is on one block */
-+		bcm947xx_parts[1].offset = bcm947xx_parts[0].size + 
-+			bcm947xx_parts[3].size + mtd->erasesize;
-+		bcm947xx_parts[1].size   = size - 
-+			bcm947xx_parts[0].size - 
-+			(2*bcm947xx_parts[3].size) - 
-+			mtd->erasesize;
-+	}
-+
-+	/* find and size rootfs */
-+	if (find_root(mtd,size,&bcm947xx_parts[2])==0) {
-+		/* entirely jffs2 */
-+		bcm947xx_parts[4].name = NULL;
-+		bcm947xx_parts[2].size = size - bcm947xx_parts[2].offset - 
-+			bcm947xx_parts[3].size;
-+	} else {
-+		/* legacy setup */
-+		/* calculate leftover flash, and assign it to the jffs2 partition */
-+		if (cfe_size_flag == 0) {
-+			bcm947xx_parts[4].offset = bcm947xx_parts[2].offset + 
-+				bcm947xx_parts[2].size;
-+			if ((bcm947xx_parts[4].offset % mtd->erasesize) > 0) {
-+				bcm947xx_parts[4].offset += mtd->erasesize - 
-+					(bcm947xx_parts[4].offset % mtd->erasesize);
-+			}
-+			bcm947xx_parts[4].size = bcm947xx_parts[3].offset - 
-+				bcm947xx_parts[4].offset;
-+		} else {
-+			bcm947xx_parts[4].offset = bcm947xx_parts[2].offset + 
-+				bcm947xx_parts[2].size;
-+			if ((bcm947xx_parts[4].offset % mtd->erasesize) > 0) {
-+				bcm947xx_parts[4].offset += mtd->erasesize - 
-+					(bcm947xx_parts[4].offset % mtd->erasesize);
-+			}
-+			bcm947xx_parts[4].size = size - bcm947xx_parts[3].size - 
-+				bcm947xx_parts[4].offset;
-+		}
-+	}
-+
-+	return bcm947xx_parts;
-+}
-+#endif
-+
-+int __init init_bcm947xx_map(void)
-+{
-+	size_t size;
-+	int ret = 0;
-+#ifdef CONFIG_MTD_PARTITIONS
-+	struct mtd_partition *parts;
-+	int i;
-+#endif
-+
-+	bcm947xx_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-+
-+	if (!bcm947xx_map.virt) {
-+		printk("Failed to ioremap\n");
-+		return -EIO;
-+	}
-+	simple_map_init(&bcm947xx_map);
-+	
-+	bcm947xx_map.copy_from = bcm947xx_map_copy_from;
-+	
-+	if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) {
-+		printk("Failed to do_map_probe\n");
-+		iounmap((void *)bcm947xx_map.virt);
-+		return -ENXIO;
-+	}
-+
-+	bcm947xx_mtd->owner = THIS_MODULE;
-+
-+	size = bcm947xx_mtd->size;
-+
-+	printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, WINDOW_ADDR);
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+	parts = init_mtd_partitions(bcm947xx_mtd, size);
-+	for (i = 0; parts[i].name; i++);
-+	ret = add_mtd_partitions(bcm947xx_mtd, parts, i);
-+	if (ret) {
-+		printk(KERN_ERR "Flash: add_mtd_partitions failed\n");
-+		goto fail;
-+	}
-+#endif
-+	return 0;
-+
-+ fail:
-+	if (bcm947xx_mtd)
-+		map_destroy(bcm947xx_mtd);
-+	if (bcm947xx_map.virt)
-+		iounmap((void *)bcm947xx_map.virt);
-+	bcm947xx_map.virt = 0;
-+	return ret;
-+}
-+
-+void __exit cleanup_bcm947xx_map(void)
-+{
-+#ifdef CONFIG_MTD_PARTITIONS
-+	del_mtd_partitions(bcm947xx_mtd);
-+#endif
-+	map_destroy(bcm947xx_mtd);
-+	iounmap((void *)bcm947xx_map.virt);
-+}
-+
-+module_init(init_bcm947xx_map);
-+module_exit(cleanup_bcm947xx_map);
-diff -Nur linux-2.6.15-rc5/drivers/mtd/maps/Kconfig linux-2.6.15-rc5-flash/drivers/mtd/maps/Kconfig
---- linux-2.6.15-rc5/drivers/mtd/maps/Kconfig	2005-12-04 06:10:42.000000000 +0100
-+++ linux-2.6.15-rc5-flash/drivers/mtd/maps/Kconfig	2005-12-18 19:36:11.555087000 +0100
-@@ -299,6 +299,12 @@
- 	  Mapping for the Flaga digital module. If you don't have one, ignore
- 	  this setting.
- 
-+config MTD_BCM47XX
-+	tristate "BCM47xx flash device"
-+	depends on MIPS && MTD_CFI && BCM947XX
-+	help
-+	  Support for the flash chips on the BCM947xx board.
-+	  
- config MTD_BEECH
- 	tristate "CFI Flash device mapped on IBM 405LP Beech"
- 	depends on MTD_CFI && BEECH
-diff -Nur linux-2.6.15-rc5/drivers/mtd/maps/Makefile linux-2.6.15-rc5-flash/drivers/mtd/maps/Makefile
---- linux-2.6.15-rc5/drivers/mtd/maps/Makefile	2005-12-04 06:10:42.000000000 +0100
-+++ linux-2.6.15-rc5-flash/drivers/mtd/maps/Makefile	2005-12-18 19:36:11.555087000 +0100
-@@ -31,6 +31,7 @@
- obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
- obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
- obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
-+obj-$(CONFIG_MTD_BCM47XX)	+= bcm47xx-flash.o
- obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
- obj-$(CONFIG_MTD_IPAQ)		+= ipaq-flash.o
- obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
diff --git a/openwrt/target/linux/brcm-2.6/patches/003-bcm4710_cache_fixes.patch b/openwrt/target/linux/brcm-2.6/patches/003-bcm4710_cache_fixes.patch
deleted file mode 100644
index eaa5231267..0000000000
--- a/openwrt/target/linux/brcm-2.6/patches/003-bcm4710_cache_fixes.patch
+++ /dev/null
@@ -1,347 +0,0 @@
-diff -urN linux.old/arch/mips/kernel/genex.S linux.dev/arch/mips/kernel/genex.S
---- linux.old/arch/mips/kernel/genex.S	2006-03-20 06:53:29.000000000 +0100
-+++ linux.dev/arch/mips/kernel/genex.S	2006-03-21 12:19:26.000000000 +0100
-@@ -72,6 +72,10 @@
- 	.set	push
- 	.set	mips3
- 	.set	noat
-+#ifdef CONFIG_BCM4710
-+	nop
-+	nop
-+#endif
- 	mfc0	k1, CP0_CAUSE
- 	li	k0, 31<<2
- 	andi	k1, k1, 0x7c
-diff -urN linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c
---- linux.old/arch/mips/mm/c-r4k.c	2006-03-20 06:53:29.000000000 +0100
-+++ linux.dev/arch/mips/mm/c-r4k.c	2006-03-21 12:19:26.000000000 +0100
-@@ -14,6 +14,12 @@
- #include <linux/mm.h>
- #include <linux/bitops.h>
- 
-+#ifdef CONFIG_BCM4710
-+#include "../bcm947xx/include/typedefs.h"
-+#include "../bcm947xx/include/sbconfig.h"
-+#include <asm/paccess.h>
-+#endif
-+
- #include <asm/bcache.h>
- #include <asm/bootinfo.h>
- #include <asm/cache.h>
-@@ -29,6 +35,9 @@
- #include <asm/war.h>
- #include <asm/cacheflush.h> /* for run_uncached() */
- 
-+/* For enabling BCM4710 cache workarounds */
-+int bcm4710 = 0;
-+
- /*
-  * Must die.
-  */
-@@ -73,7 +82,9 @@
- {
- 	unsigned long  dc_lsize = cpu_dcache_line_size();
- 
--	if (dc_lsize == 16)
-+	if (bcm4710)
-+		r4k_blast_dcache_page = blast_dcache_page;
-+	else if (dc_lsize == 16)
- 		r4k_blast_dcache_page = blast_dcache16_page;
- 	else if (dc_lsize == 32)
- 		r4k_blast_dcache_page = r4k_blast_dcache_page_dc32;
-@@ -85,7 +96,9 @@
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
--	if (dc_lsize == 16)
-+	if (bcm4710)
-+		r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+	else if (dc_lsize == 16)
- 		r4k_blast_dcache_page_indexed = blast_dcache16_page_indexed;
- 	else if (dc_lsize == 32)
- 		r4k_blast_dcache_page_indexed = blast_dcache32_page_indexed;
-@@ -97,7 +110,9 @@
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
--	if (dc_lsize == 16)
-+	if (bcm4710)
-+		r4k_blast_dcache = blast_dcache;
-+	else if (dc_lsize == 16)
- 		r4k_blast_dcache = blast_dcache16;
- 	else if (dc_lsize == 32)
- 		r4k_blast_dcache = blast_dcache32;
-@@ -660,6 +675,8 @@
- 	unsigned long addr = (unsigned long) arg;
- 
- 	R4600_HIT_CACHEOP_WAR_IMPL;
-+	BCM4710_PROTECTED_FILL_TLB(addr);
-+	BCM4710_PROTECTED_FILL_TLB(addr + 4);
- 	protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- 	if (!cpu_icache_snoops_remote_store && scache_size)
- 		protected_writeback_scache_line(addr & ~(sc_lsize - 1));
-@@ -1136,6 +1153,16 @@
- static inline void coherency_setup(void)
- {
- 	change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
-+#if defined(CONFIG_BCM4310) || defined(CONFIG_BCM4704) || defined(CONFIG_BCM5365)
-+	if (BCM330X(current_cpu_data.processor_id)) {
-+		__u32 cm = read_c0_diag();
-+		/* Enable icache */
-+		cm |= (1 << 31);
-+		/* Enable dcache */
-+		cm |= (1 << 30);
-+		write_c0_diag(cm);
-+	}
-+#endif
- 
- 	/*
- 	 * c0_status.cu=0 specifies that updates by the sc instruction use
-@@ -1165,6 +1192,15 @@
- 
- 	/* Default cache error handler for R4000 and R5000 family */
- 	set_uncached_handler (0x100, &except_vec2_generic, 0x80);
-+	
-+	/* Check if special workarounds are required */
-+#ifdef CONFIG_BCM4710
-+	if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & 0xff) == 0) {
-+		printk("Enabling BCM4710A0 cache workarounds.\n");
-+		bcm4710 = 1;
-+	} else
-+#endif
-+		bcm4710 = 0;
- 
- 	probe_pcache();
- 	setup_scache();
-diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c
---- linux.old/arch/mips/mm/tlbex.c	2006-03-21 12:12:38.000000000 +0100
-+++ linux.dev/arch/mips/mm/tlbex.c	2006-03-21 12:19:26.000000000 +0100
-@@ -28,6 +28,10 @@
- 
- /* #define DEBUG_TLB */
- 
-+#ifdef CONFIG_BCM4710
-+extern int bcm4710;
-+#endif
-+
- static __init int __attribute__((unused)) r45k_bvahwbug(void)
- {
- 	/* XXX: We should probe for the presence of this bug, but we don't. */
-@@ -1152,6 +1156,12 @@
- 	memset(relocs, 0, sizeof(relocs));
- 	memset(final_handler, 0, sizeof(final_handler));
- 
-+#ifdef CONFIG_BCM4710
-+	if (bcm4710) {
-+		i_nop(&p);
-+	}
-+#endif
-+	
- 	/*
- 	 * create the plain linear handler
- 	 */
-diff -urN linux.old/include/asm-mips/r4kcache.h linux.dev/include/asm-mips/r4kcache.h
---- linux.old/include/asm-mips/r4kcache.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux.dev/include/asm-mips/r4kcache.h	2006-03-21 18:40:32.000000000 +0100
-@@ -16,6 +16,18 @@
- #include <asm/cacheops.h>
- #include <asm/cpu-features.h>
- 
-+#ifdef CONFIG_BCM4710
-+#define BCM4710_DUMMY_RREG() (((sbconfig_t *)(KSEG1ADDR(SB_ENUM_BASE + SBCONFIGOFF)))->sbimstate)
-+
-+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
-  * This macro return a properly sign-extended address suitable as base address
-  * for indexed cache operations.  Two issues here:
-@@ -46,6 +58,7 @@
- 
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Index_Writeback_Inv_D, addr);
- }
- 
-@@ -61,11 +74,13 @@
- 
- static inline void flush_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Writeback_Inv_D, addr);
- }
- 
- static inline void invalidate_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Invalidate_D, addr);
- }
- 
-@@ -97,6 +112,7 @@
-  */
- static inline void protected_flush_icache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	protected_cache_op(Hit_Invalidate_I, addr);
- }
- 
-@@ -108,6 +124,7 @@
-  */
- static inline void protected_writeback_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	protected_cache_op(Hit_Writeback_Inv_D, addr);
- }
- 
-@@ -228,8 +245,52 @@
- 		: "r" (base),						\
- 		  "i" (op));
- 
-+static inline void blast_dcache(void)
-+{
-+	unsigned long start = KSEG0;
-+	unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+	unsigned long end = (start + dcache_size);
-+
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Index_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+
-+	BCM4710_FILL_TLB(start);
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Hit_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+	unsigned long ws_end = current_cpu_data.dcache.ways <<
-+	                       current_cpu_data.dcache.waybit;
-+	unsigned long ws, addr;
-+	for (ws = 0; ws < ws_end; ws += ws_inc) {
-+		start = page + ws;
-+		for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+			BCM4710_DUMMY_RREG();
-+			cache_op(Index_Writeback_Inv_D, addr);
-+		}
-+	}
-+}
-+
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
--#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
- static inline void blast_##pfx##cache##lsize(void)			\
- {									\
- 	unsigned long start = INDEX_BASE;				\
-@@ -239,6 +300,7 @@
- 	                       current_cpu_data.desc.waybit;		\
- 	unsigned long ws, addr;						\
- 									\
-+	war								\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
- 		for (addr = start; addr < end; addr += lsize * 32)	\
- 			cache##lsize##_unroll32(addr|ws,indexop);	\
-@@ -249,6 +311,7 @@
- 	unsigned long start = page;					\
- 	unsigned long end = page + PAGE_SIZE;				\
- 									\
-+	war								\
- 	do {								\
- 		cache##lsize##_unroll32(start,hitop);			\
- 		start += lsize * 32;					\
-@@ -265,29 +328,31 @@
- 	                       current_cpu_data.desc.waybit;		\
- 	unsigned long ws, addr;						\
- 									\
-+	war								\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
- 		for (addr = start; addr < end; addr += lsize * 32)	\
- 			cache##lsize##_unroll32(addr|ws,indexop);	\
- }
- 
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
- 
- /* build blast_xxx_range, protected_blast_xxx_range */
--#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war) \
- static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
- 	unsigned long addr = start & ~(lsize - 1);			\
- 	unsigned long aend = (end - 1) & ~(lsize - 1);			\
-+	war								\
- 	while (1) {							\
- 		prot##cache_op(hitop, addr);				\
- 		if (addr == aend)					\
-@@ -296,12 +361,12 @@
- 	}								\
- }
- 
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
- /* blast_inv_dcache_range */
--__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
- 
- #endif /* _ASM_R4KCACHE_H */
-diff -urN linux.old/include/asm-mips/stackframe.h linux.dev/include/asm-mips/stackframe.h
---- linux.old/include/asm-mips/stackframe.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux.dev/include/asm-mips/stackframe.h	2006-03-21 12:19:26.000000000 +0100
-@@ -285,6 +285,10 @@
- 		.macro	RESTORE_SP_AND_RET
- 		LONG_L	sp, PT_R29(sp)
- 		.set	mips3
-+#ifdef CONFIG_BCM4710
-+		nop
-+		nop
-+#endif
- 		eret
- 		.set	mips0
- 		.endm
diff --git a/openwrt/target/linux/brcm-2.6/patches/004-b44_bcm47xx_support.patch b/openwrt/target/linux/brcm-2.6/patches/004-b44_bcm47xx_support.patch
deleted file mode 100644
index b24480763f..0000000000
--- a/openwrt/target/linux/brcm-2.6/patches/004-b44_bcm47xx_support.patch
+++ /dev/null
@@ -1,697 +0,0 @@
-diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
---- linux.old/drivers/net/b44.c	2006-01-16 20:35:09.203794500 +0100
-+++ linux.dev/drivers/net/b44.c	2006-01-16 22:20:45.631180500 +0100
-@@ -1,7 +1,9 @@
--/* b44.c: Broadcom 4400 device driver.
-+/* b44.c: Broadcom 4400/47xx device driver.
-  *
-  * Copyright (C) 2002 David S. Miller (davem@redhat.com)
-- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
-+ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi)
-+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ * Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org)
-  *
-  * Distribute under GPL.
-  */
-@@ -31,6 +33,28 @@
- #define DRV_MODULE_VERSION	"0.97"
- #define DRV_MODULE_RELDATE	"Nov 30, 2005"
- 
-+#ifdef CONFIG_BCM947XX
-+extern char *nvram_get(char *name);
-+static inline void e_aton(char *str, char *dest)
-+{
-+	int i = 0;
-+
-+	if (str == NULL) {
-+		memset(dest, 0, 6);
-+		return;
-+	}
-+	
-+	for (;;) {
-+		dest[i++] = (char) simple_strtoul(str, NULL, 16);
-+		str += 2;
-+		if (!*str++ || i == 6)
-+			break;
-+	}
-+}
-+
-+static int b44_4713_instance;
-+#endif
-+
- #define B44_DEF_MSG_ENABLE	  \
- 	(NETIF_MSG_DRV		| \
- 	 NETIF_MSG_PROBE	| \
-@@ -77,8 +101,8 @@
- static char version[] __devinitdata =
- 	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
- 
--MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller");
--MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver");
-+MODULE_AUTHOR("Felix Fietkau, Florian Schirmer, Pekka Pietikainen, David S. Miller");
-+MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver");
- MODULE_LICENSE("GPL");
- MODULE_VERSION(DRV_MODULE_VERSION);
- 
-@@ -93,6 +117,10 @@
- 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
- 	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1,
- 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+#ifdef CONFIG_BCM947XX
-+	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4713,
-+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+#endif
- 	{ }	/* terminate list with empty entry */
- };
- 
-@@ -131,17 +159,6 @@
- 	                              dma_desc_sync_size, dir);
- }
- 
--static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
--{
--	return readl(bp->regs + reg);
--}
--
--static inline void bw32(const struct b44 *bp, 
--			unsigned long reg, unsigned long val)
--{
--	writel(val, bp->regs + reg);
--}
--
- static int b44_wait_bit(struct b44 *bp, unsigned long reg,
- 			u32 bit, unsigned long timeout, const int clear)
- {
-@@ -268,6 +285,10 @@
- 		break;
- 	};
- #endif
-+#ifdef CONFIG_BCM947XX
-+	if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
-+		return b44_4713_instance++;
-+#endif
- 	return 0;
- }
- 
-@@ -277,6 +298,30 @@
- 		== SBTMSLOW_CLOCK);
- }
- 
-+#ifdef CONFIG_BCM947XX
-+static inline void __b44_cam_read(struct b44 *bp, unsigned char *data, int index)
-+{
-+	u32 val;
-+
-+	bw32(bp, B44_CAM_CTRL, (CAM_CTRL_READ |
-+			    (index << CAM_CTRL_INDEX_SHIFT)));
-+
-+	b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);
-+
-+	val = br32(bp, B44_CAM_DATA_LO);
-+
-+	data[2] = (val >> 24) & 0xFF;
-+	data[3] = (val >> 16) & 0xFF;
-+	data[4] = (val >> 8) & 0xFF;
-+	data[5] = (val >> 0) & 0xFF;
-+
-+	val = br32(bp, B44_CAM_DATA_HI);
-+
-+	data[0] = (val >> 8) & 0xFF;
-+	data[1] = (val >> 0) & 0xFF;
-+}
-+#endif
-+
- static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
- {
- 	u32 val;
-@@ -313,14 +358,14 @@
- 	bw32(bp, B44_IMASK, bp->imask);
- }
- 
--static int b44_readphy(struct b44 *bp, int reg, u32 *val)
-+static int __b44_readphy(struct b44 *bp, int phy_addr, int reg, u32 *val)
- {
- 	int err;
- 
- 	bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
- 	bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
- 			     (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) |
--			     (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+			     (phy_addr << MDIO_DATA_PMD_SHIFT) |
- 			     (reg << MDIO_DATA_RA_SHIFT) |
- 			     (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
- 	err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
-@@ -329,18 +374,34 @@
- 	return err;
- }
- 
--static int b44_writephy(struct b44 *bp, int reg, u32 val)
-+static int __b44_writephy(struct b44 *bp, int phy_addr, int reg, u32 val)
- {
- 	bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
- 	bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
- 			     (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) |
--			     (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+			     (phy_addr << MDIO_DATA_PMD_SHIFT) |
- 			     (reg << MDIO_DATA_RA_SHIFT) |
- 			     (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) |
- 			     (val & MDIO_DATA_DATA)));
- 	return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
- }
- 
-+static inline int b44_readphy(struct b44 *bp, int reg, u32 *val)
-+{
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+		return 0;
-+
-+	return __b44_readphy(bp, bp->phy_addr, reg, val);
-+}
-+
-+static inline int b44_writephy(struct b44 *bp, int reg, u32 val)
-+{
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+		return 0;
-+		
-+	return __b44_writephy(bp, bp->phy_addr, reg, val);
-+}
-+
- /* miilib interface */
- /* FIXME FIXME: phy_id is ignored, bp->phy_addr use is unconditional
-  * due to code existing before miilib use was added to this driver.
-@@ -369,6 +430,8 @@
- 	u32 val;
- 	int err;
- 
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+		return 0;
- 	err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
- 	if (err)
- 		return err;
-@@ -439,6 +502,22 @@
- 	u32 val;
- 	int err;
- 
-+#ifdef CONFIG_BCM947XX
-+	/*
-+	 * workaround for bad hardware design in Linksys WAP54G v1.0
-+	 * see https://dev.openwrt.org/ticket/146
-+	 * check and reset bit "isolate"
-+	 */
-+	if ((bp->pdev->device == PCI_DEVICE_ID_BCM4713) &&
-+			(atoi(nvram_get("boardnum")) == 2) &&
-+			(__b44_readphy(bp, 0, MII_BMCR, &val) == 0) && 
-+			(val & BMCR_ISOLATE) &&
-+			(__b44_writephy(bp, 0, MII_BMCR, val & ~BMCR_ISOLATE) != 0)) {
-+		printk(KERN_WARNING PFX "PHY: cannot reset MII transceiver isolate bit.\n");
-+	}
-+#endif
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+		return 0;
- 	if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
- 		goto out;
- 	if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
-@@ -534,6 +613,19 @@
- {
- 	u32 bmsr, aux;
- 
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) {
-+		bp->flags |= B44_FLAG_100_BASE_T;
-+		bp->flags |= B44_FLAG_FULL_DUPLEX;
-+		if (!netif_carrier_ok(bp->dev)) {
-+			u32 val = br32(bp, B44_TX_CTRL);
-+			val |= TX_CTRL_DUPLEX;
-+			bw32(bp, B44_TX_CTRL, val);
-+			netif_carrier_on(bp->dev);
-+			b44_link_report(bp);
-+		}
-+		return;
-+	}
-+
- 	if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
- 	    !b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
- 	    (bmsr != 0xffff)) {
-@@ -1281,9 +1373,10 @@
- 		bw32(bp, B44_DMARX_CTRL, 0);
- 		bp->rx_prod = bp->rx_cons = 0;
- 	} else {
--		ssb_pci_setup(bp, (bp->core_unit == 0 ?
--				   SBINTVEC_ENET0 :
--				   SBINTVEC_ENET1));
-+		if (bp->pdev->device != PCI_DEVICE_ID_BCM4713)
-+			ssb_pci_setup(bp, (bp->core_unit == 0 ?
-+					   SBINTVEC_ENET0 :
-+					   SBINTVEC_ENET1));
- 	}
- 
- 	ssb_core_reset(bp);
-@@ -1291,8 +1384,14 @@
- 	b44_clear_stats(bp);
- 
- 	/* Make PHY accessible. */
--	bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
-+	if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
-+		bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
-+			     (((100000000 + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO)
-+			     & MDIO_CTRL_MAXF_MASK)));
-+	else
-+		bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
- 			     (0x0d & MDIO_CTRL_MAXF_MASK)));
-+
- 	br32(bp, B44_MDIO_CTRL);
- 
- 	if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
-@@ -1834,18 +1933,297 @@
- 	.get_perm_addr		= ethtool_op_get_perm_addr,
- };
- 
-+static int b44_ethtool_ioctl (struct net_device *dev, void __user *useraddr)
-+{
-+	struct b44 *bp = dev->priv;
-+	struct pci_dev *pci_dev = bp->pdev;
-+	u32 ethcmd;
-+
-+	if (copy_from_user (&ethcmd, useraddr, sizeof (ethcmd)))
-+		return -EFAULT;
-+
-+	switch (ethcmd) {
-+	case ETHTOOL_GDRVINFO: {
-+		struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
-+		strcpy (info.driver, DRV_MODULE_NAME);
-+		strcpy (info.version, DRV_MODULE_VERSION);
-+		memset(&info.fw_version, 0, sizeof(info.fw_version));
-+		strcpy (info.bus_info, pci_name(pci_dev));
-+		info.eedump_len = 0;
-+		info.regdump_len = 0;
-+		if (copy_to_user (useraddr, &info, sizeof (info)))
-+			return -EFAULT;
-+		return 0;
-+	}
-+
-+	case ETHTOOL_GSET: {
-+		struct ethtool_cmd cmd = { ETHTOOL_GSET };
-+
-+		if (!(bp->flags & B44_FLAG_INIT_COMPLETE))
-+			return -EAGAIN;
-+		cmd.supported = (SUPPORTED_Autoneg);
-+		cmd.supported |= (SUPPORTED_100baseT_Half |
-+				  SUPPORTED_100baseT_Full |
-+				  SUPPORTED_10baseT_Half |
-+				  SUPPORTED_10baseT_Full |
-+				  SUPPORTED_MII);
-+
-+		cmd.advertising = 0;
-+		if (bp->flags & B44_FLAG_ADV_10HALF)
-+			cmd.advertising |= ADVERTISE_10HALF;
-+		if (bp->flags & B44_FLAG_ADV_10FULL)
-+			cmd.advertising |= ADVERTISE_10FULL;
-+		if (bp->flags & B44_FLAG_ADV_100HALF)
-+			cmd.advertising |= ADVERTISE_100HALF;
-+		if (bp->flags & B44_FLAG_ADV_100FULL)
-+			cmd.advertising |= ADVERTISE_100FULL;
-+		cmd.advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
-+		cmd.speed = (bp->flags & B44_FLAG_100_BASE_T) ?
-+			SPEED_100 : SPEED_10;
-+		cmd.duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
-+			DUPLEX_FULL : DUPLEX_HALF;
-+		cmd.port = 0;
-+		cmd.phy_address = bp->phy_addr;
-+		cmd.transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ?
-+			XCVR_INTERNAL : XCVR_EXTERNAL;
-+		cmd.autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
-+			AUTONEG_DISABLE : AUTONEG_ENABLE;
-+		cmd.maxtxpkt = 0;
-+		cmd.maxrxpkt = 0;
-+		if (copy_to_user(useraddr, &cmd, sizeof(cmd)))
-+			return -EFAULT;
-+		return 0;
-+	}
-+	case ETHTOOL_SSET: {
-+		struct ethtool_cmd cmd;
-+
-+		if (!(bp->flags & B44_FLAG_INIT_COMPLETE))
-+			return -EAGAIN;
-+
-+		if (copy_from_user(&cmd, useraddr, sizeof(cmd)))
-+			return -EFAULT;
-+
-+		/* We do not support gigabit. */
-+		if (cmd.autoneg == AUTONEG_ENABLE) {
-+			if (cmd.advertising &
-+			    (ADVERTISED_1000baseT_Half |
-+			     ADVERTISED_1000baseT_Full))
-+				return -EINVAL;
-+		} else if ((cmd.speed != SPEED_100 &&
-+			    cmd.speed != SPEED_10) ||
-+			   (cmd.duplex != DUPLEX_HALF &&
-+			    cmd.duplex != DUPLEX_FULL)) {
-+				return -EINVAL;
-+		}
-+
-+		spin_lock_irq(&bp->lock);
-+
-+		if (cmd.autoneg == AUTONEG_ENABLE) {
-+			bp->flags &= ~B44_FLAG_FORCE_LINK;
-+			bp->flags &= ~(B44_FLAG_ADV_10HALF |
-+				       B44_FLAG_ADV_10FULL |
-+				       B44_FLAG_ADV_100HALF |
-+				       B44_FLAG_ADV_100FULL);
-+			if (cmd.advertising & ADVERTISE_10HALF)
-+				bp->flags |= B44_FLAG_ADV_10HALF;
-+			if (cmd.advertising & ADVERTISE_10FULL)
-+				bp->flags |= B44_FLAG_ADV_10FULL;
-+			if (cmd.advertising & ADVERTISE_100HALF)
-+				bp->flags |= B44_FLAG_ADV_100HALF;
-+			if (cmd.advertising & ADVERTISE_100FULL)
-+				bp->flags |= B44_FLAG_ADV_100FULL;
-+		} else {
-+			bp->flags |= B44_FLAG_FORCE_LINK;
-+			if (cmd.speed == SPEED_100)
-+				bp->flags |= B44_FLAG_100_BASE_T;
-+			if (cmd.duplex == DUPLEX_FULL)
-+				bp->flags |= B44_FLAG_FULL_DUPLEX;
-+		}
-+
-+		b44_setup_phy(bp);
-+
-+		spin_unlock_irq(&bp->lock);
-+
-+		return 0;
-+	}
-+
-+	case ETHTOOL_GMSGLVL: {
-+		struct ethtool_value edata = { ETHTOOL_GMSGLVL };
-+		edata.data = bp->msg_enable;
-+		if (copy_to_user(useraddr, &edata, sizeof(edata)))
-+			return -EFAULT;
-+		return 0;
-+	}
-+	case ETHTOOL_SMSGLVL: {
-+		struct ethtool_value edata;
-+		if (copy_from_user(&edata, useraddr, sizeof(edata)))
-+			return -EFAULT;
-+		bp->msg_enable = edata.data;
-+		return 0;
-+	}
-+	case ETHTOOL_NWAY_RST: {
-+		u32 bmcr;
-+		int r;
-+
-+		spin_lock_irq(&bp->lock);
-+		b44_readphy(bp, MII_BMCR, &bmcr);
-+		b44_readphy(bp, MII_BMCR, &bmcr);
-+		r = -EINVAL;
-+		if (bmcr & BMCR_ANENABLE) {
-+			b44_writephy(bp, MII_BMCR,
-+				     bmcr | BMCR_ANRESTART);
-+			r = 0;
-+		}
-+		spin_unlock_irq(&bp->lock);
-+
-+		return r;
-+	}
-+	case ETHTOOL_GLINK: {
-+		struct ethtool_value edata = { ETHTOOL_GLINK };
-+		edata.data = netif_carrier_ok(bp->dev) ? 1 : 0;
-+		if (copy_to_user(useraddr, &edata, sizeof(edata)))
-+			return -EFAULT;
-+		return 0;
-+	}
-+	case ETHTOOL_GRINGPARAM: {
-+		struct ethtool_ringparam ering = { ETHTOOL_GRINGPARAM };
-+
-+		ering.rx_max_pending = B44_RX_RING_SIZE - 1;
-+		ering.rx_pending = bp->rx_pending;
-+
-+		/* XXX ethtool lacks a tx_max_pending, oops... */
-+
-+		if (copy_to_user(useraddr, &ering, sizeof(ering)))
-+			return -EFAULT;
-+		return 0;
-+	}
-+	case ETHTOOL_SRINGPARAM: {
-+		struct ethtool_ringparam ering;
-+
-+		if (copy_from_user(&ering, useraddr, sizeof(ering)))
-+			return -EFAULT;
-+
-+		if ((ering.rx_pending > B44_RX_RING_SIZE - 1) ||
-+		    (ering.rx_mini_pending != 0) ||
-+		    (ering.rx_jumbo_pending != 0) ||
-+		    (ering.tx_pending > B44_TX_RING_SIZE - 1))
-+			return -EINVAL;
-+
-+		spin_lock_irq(&bp->lock);
-+
-+		bp->rx_pending = ering.rx_pending;
-+		bp->tx_pending = ering.tx_pending;
-+
-+		b44_halt(bp);
-+		b44_init_rings(bp);
-+		b44_init_hw(bp);
-+		netif_wake_queue(bp->dev);
-+		spin_unlock_irq(&bp->lock);
-+
-+		b44_enable_ints(bp);
-+		
-+		return 0;
-+	}
-+	case ETHTOOL_GPAUSEPARAM: {
-+		struct ethtool_pauseparam epause = { ETHTOOL_GPAUSEPARAM };
-+
-+		epause.autoneg =
-+			(bp->flags & B44_FLAG_PAUSE_AUTO) != 0;
-+		epause.rx_pause =
-+			(bp->flags & B44_FLAG_RX_PAUSE) != 0;
-+		epause.tx_pause =
-+			(bp->flags & B44_FLAG_TX_PAUSE) != 0;
-+		if (copy_to_user(useraddr, &epause, sizeof(epause)))
-+			return -EFAULT;
-+		return 0;
-+	}
-+	case ETHTOOL_SPAUSEPARAM: {
-+		struct ethtool_pauseparam epause;
-+
-+		if (copy_from_user(&epause, useraddr, sizeof(epause)))
-+			return -EFAULT;
-+
-+		spin_lock_irq(&bp->lock);
-+		if (epause.autoneg)
-+			bp->flags |= B44_FLAG_PAUSE_AUTO;
-+		else
-+			bp->flags &= ~B44_FLAG_PAUSE_AUTO;
-+		if (epause.rx_pause)
-+			bp->flags |= B44_FLAG_RX_PAUSE;
-+		else
-+			bp->flags &= ~B44_FLAG_RX_PAUSE;
-+		if (epause.tx_pause)
-+			bp->flags |= B44_FLAG_TX_PAUSE;
-+		else
-+			bp->flags &= ~B44_FLAG_TX_PAUSE;
-+		if (bp->flags & B44_FLAG_PAUSE_AUTO) {
-+			b44_halt(bp);
-+			b44_init_rings(bp);
-+			b44_init_hw(bp);
-+		} else {
-+			__b44_set_flow_ctrl(bp, bp->flags);
-+		}
-+		spin_unlock_irq(&bp->lock);
-+
-+		b44_enable_ints(bp);
-+		
-+		return 0;
-+	}
-+	};
-+
-+	return -EOPNOTSUPP;
-+}
-+
- static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- {
- 	struct mii_ioctl_data *data = if_mii(ifr);
- 	struct b44 *bp = netdev_priv(dev);
- 	int err = -EINVAL;
- 
--	if (!netif_running(dev))
-+	if (bp->pdev->device != PCI_DEVICE_ID_BCM4713) {
-+		if (!netif_running(dev))
-+			goto out;
-+
-+		spin_lock_irq(&bp->lock);
-+		err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
-+		spin_unlock_irq(&bp->lock);
- 		goto out;
-+	}
- 
--	spin_lock_irq(&bp->lock);
--	err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
--	spin_unlock_irq(&bp->lock);
-+	switch (cmd) {
-+	case SIOCETHTOOL:
-+		return b44_ethtool_ioctl(dev, (void __user*) ifr->ifr_data);
-+
-+	case SIOCGMIIPHY:
-+		data->phy_id = bp->phy_addr;
-+
-+		/* fallthru */
-+	case SIOCGMIIREG: {
-+		u32 mii_regval;
-+		spin_lock_irq(&bp->lock);
-+		err = __b44_readphy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
-+		spin_unlock_irq(&bp->lock);
-+
-+		data->val_out = mii_regval;
-+
-+		return err;
-+	}
-+
-+	case SIOCSMIIREG:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+
-+		spin_lock_irq(&bp->lock);
-+		err = __b44_writephy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
-+		spin_unlock_irq(&bp->lock);
-+
-+		return err;
-+
-+	default:
-+		break;
-+	};
-+	return -EOPNOTSUPP;
-+		
- out:
- 	return err;
- }
-@@ -1865,22 +2243,55 @@
- static int __devinit b44_get_invariants(struct b44 *bp)
- {
- 	u8 eeprom[128];
--	int err;
--
--	err = b44_read_eeprom(bp, &eeprom[0]);
--	if (err)
--		goto out;
--
--	bp->dev->dev_addr[0] = eeprom[79];
--	bp->dev->dev_addr[1] = eeprom[78];
--	bp->dev->dev_addr[2] = eeprom[81];
--	bp->dev->dev_addr[3] = eeprom[80];
--	bp->dev->dev_addr[4] = eeprom[83];
--	bp->dev->dev_addr[5] = eeprom[82];
--	memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len);
--
--	bp->phy_addr = eeprom[90] & 0x1f;
-+	u8 buf[32];
-+	int err = 0;
-+	unsigned long flags;
-+
-+#ifdef CONFIG_BCM947XX
-+	if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) {
-+		/* 
-+		 * BCM47xx boards don't have a EEPROM. The MAC is stored in
-+		 * a NVRAM area somewhere in the flash memory.
-+		 */
-+		sprintf(buf, "et%dmacaddr", b44_4713_instance);
-+		if (nvram_get(buf)) {
-+			e_aton(nvram_get(buf), bp->dev->dev_addr);
-+		} else {
-+			/*
-+			 * Getting the MAC out of NVRAM failed. To make it work
-+			 * here, we simply rely on the bootloader to write the
-+			 * MAC into the CAM.
-+			 */
-+			spin_lock_irqsave(&bp->lock, flags);
-+			__b44_cam_read(bp, bp->dev->dev_addr, 0);
-+			spin_unlock_irqrestore(&bp->lock, flags);
-+		}
- 
-+		/* 
-+		 * BCM47xx boards don't have a PHY. Usually there is a switch
-+		 * chip with multiple PHYs connected to the PHY port.
-+		 */
-+		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+		bp->dma_offset = 0;
-+	} else
-+#endif
-+	{
-+		err = b44_read_eeprom(bp, &eeprom[0]);
-+		if (err)
-+			goto out;
-+	
-+		bp->dev->dev_addr[0] = eeprom[79];
-+		bp->dev->dev_addr[1] = eeprom[78];
-+		bp->dev->dev_addr[2] = eeprom[81];
-+		bp->dev->dev_addr[3] = eeprom[80];
-+		bp->dev->dev_addr[4] = eeprom[83];
-+		bp->dev->dev_addr[5] = eeprom[82];
-+		memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len);
-+	
-+		bp->phy_addr = eeprom[90] & 0x1f;
-+		bp->dma_offset = SB_PCI_DMA;
-+	}
-+	
- 	/* With this, plus the rx_header prepended to the data by the
- 	 * hardware, we'll land the ethernet header on a 2-byte boundary.
- 	 */
-@@ -1889,11 +2300,7 @@
- 	bp->imask = IMASK_DEF;
- 
- 	bp->core_unit = ssb_core_unit(bp);
--	bp->dma_offset = SB_PCI_DMA;
- 
--	/* XXX - really required? 
--	   bp->flags |= B44_FLAG_BUGGY_TXPTR;
--         */
- out:
- 	return err;
- }
-@@ -2032,11 +2439,17 @@
- 
- 	pci_save_state(bp->pdev);
- 
--	printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
-+	printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name,
-+		(pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400");
- 	for (i = 0; i < 6; i++)
- 		printk("%2.2x%c", dev->dev_addr[i],
- 		       i == 5 ? '\n' : ':');
- 
-+	/* Initialize phy */
-+	spin_lock_irq(&bp->lock);
-+	b44_chip_reset(bp);
-+	spin_unlock_irq(&bp->lock);
-+
- 	return 0;
- 
- err_out_iounmap:
-diff -urN linux.old/drivers/net/b44.h linux.dev/drivers/net/b44.h
---- linux.old/drivers/net/b44.h	2006-01-16 20:35:09.255797750 +0100
-+++ linux.dev/drivers/net/b44.h	2006-01-16 20:30:30.566380750 +0100
-@@ -292,6 +292,10 @@
- #define SSB_PCI_MASK1		0xfc000000
- #define SSB_PCI_MASK2		0xc0000000
- 
-+#define br32(bp, REG)	readl((void *)bp->regs + (REG))
-+#define bw32(bp, REG,VAL)	writel((VAL), (void *)bp->regs + (REG))
-+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
-+
- /* 4400 PHY registers */
- #define B44_MII_AUXCTRL		24	/* Auxiliary Control */
- #define  MII_AUXCTRL_DUPLEX	0x0001  /* Full Duplex */
-@@ -345,6 +349,8 @@
- };
- 
- #define B44_MCAST_TABLE_SIZE	32
-+#define B44_PHY_ADDR_NO_PHY	30
-+#define B44_MDC_RATIO		5000000
- 
- #define	B44_STAT_REG_DECLARE		\
- 	_B44(tx_good_octets)		\
-@@ -420,6 +426,7 @@
- 
- 	u32			dma_offset;
- 	u32			flags;
-+#define B44_FLAG_INIT_COMPLETE	0x00000001
- #define B44_FLAG_BUGGY_TXPTR	0x00000002
- #define B44_FLAG_REORDER_BUG	0x00000004
- #define B44_FLAG_PAUSE_AUTO	0x00008000
diff --git a/openwrt/target/linux/control/kernel.control b/openwrt/target/linux/control/kernel.control
deleted file mode 100644
index be5f10940d..0000000000
--- a/openwrt/target/linux/control/kernel.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kernel
-Priority: optional
-Section: sys
-Description: Virtual package for the Kernel
diff --git a/openwrt/target/linux/control/kmod-arptables.control b/openwrt/target/linux/control/kmod-arptables.control
deleted file mode 100644
index 6896388e6e..0000000000
--- a/openwrt/target/linux/control/kmod-arptables.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-arptables
-Priority: optional
-Section: net
-Description: ARP firewalling kernel modules
diff --git a/openwrt/target/linux/control/kmod-atm.control b/openwrt/target/linux/control/kmod-atm.control
deleted file mode 100644
index ae07126a6a..0000000000
--- a/openwrt/target/linux/control/kmod-atm.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-atm
-Priority: optional
-Section: sys
-Description: ATM/ADSL support
diff --git a/openwrt/target/linux/control/kmod-ax25.control b/openwrt/target/linux/control/kmod-ax25.control
deleted file mode 100644
index 18c4cef8fe..0000000000
--- a/openwrt/target/linux/control/kmod-ax25.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ax25
-Priority: optional
-Section: net
-Description: Kernel AX25 driver
diff --git a/openwrt/target/linux/control/kmod-bluetooth.control b/openwrt/target/linux/control/kmod-bluetooth.control
deleted file mode 100644
index 9f5409a9b7..0000000000
--- a/openwrt/target/linux/control/kmod-bluetooth.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-bluetooth
-Priority: optional
-Section: sys
-Description: Bluetooth support
diff --git a/openwrt/target/linux/control/kmod-brcm-et.control b/openwrt/target/linux/control/kmod-brcm-et.control
deleted file mode 100644
index 3e65bc906a..0000000000
--- a/openwrt/target/linux/control/kmod-brcm-et.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-brcm-et
-Priority: optional
-Section: sys
-Description: Proprietary driver for Broadcom Ethernet chipsets
diff --git a/openwrt/target/linux/control/kmod-brcm-wl.control b/openwrt/target/linux/control/kmod-brcm-wl.control
deleted file mode 100644
index cf610c3673..0000000000
--- a/openwrt/target/linux/control/kmod-brcm-wl.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-brcm-wl
-Priority: optional
-Section: sys
-Description: Proprietary driver for Broadcom Wireless chipsets
diff --git a/openwrt/target/linux/control/kmod-brcm-wl2.control b/openwrt/target/linux/control/kmod-brcm-wl2.control
deleted file mode 100644
index 4ae019ddf9..0000000000
--- a/openwrt/target/linux/control/kmod-brcm-wl2.control
+++ /dev/null
@@ -1,5 +0,0 @@
-Package: kmod-brcm-wl2
-Priority: optional
-Section: sys
-Description: Proprietary driver for Broadcom Wireless chipsets
-  New version with multi-BSS support
diff --git a/openwrt/target/linux/control/kmod-cpmac.control b/openwrt/target/linux/control/kmod-cpmac.control
deleted file mode 100644
index 18f8e901b6..0000000000
--- a/openwrt/target/linux/control/kmod-cpmac.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-cpmac
-Priority: optional
-Section: sys
-Description: AR7 CPMAC ethernet driver
diff --git a/openwrt/target/linux/control/kmod-crypto.control b/openwrt/target/linux/control/kmod-crypto.control
deleted file mode 100644
index 199d33cd7d..0000000000
--- a/openwrt/target/linux/control/kmod-crypto.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-crypto
-Priority: optional
-Section: sys
-Description: CryptoAPI kernel modules
diff --git a/openwrt/target/linux/control/kmod-ebtables.control b/openwrt/target/linux/control/kmod-ebtables.control
deleted file mode 100644
index 85c2af9bcc..0000000000
--- a/openwrt/target/linux/control/kmod-ebtables.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ebtables
-Priority: optional
-Section: net
-Description: Ethernet bridge firewalling kernel modules
diff --git a/openwrt/target/linux/control/kmod-fs-cifs.control b/openwrt/target/linux/control/kmod-fs-cifs.control
deleted file mode 100644
index 832224764d..0000000000
--- a/openwrt/target/linux/control/kmod-fs-cifs.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-fs-cifs
-Priority: optional
-Section: sys
-Description: Kernel modules for CIFS support
diff --git a/openwrt/target/linux/control/kmod-fs-ext2.control b/openwrt/target/linux/control/kmod-fs-ext2.control
deleted file mode 100644
index ec06cffe23..0000000000
--- a/openwrt/target/linux/control/kmod-fs-ext2.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-fs-ext2
-Priority: optional
-Section: sys
-Description: Kernel modules for EXT2 filesystem support
diff --git a/openwrt/target/linux/control/kmod-fs-ext3.control b/openwrt/target/linux/control/kmod-fs-ext3.control
deleted file mode 100644
index 735178895d..0000000000
--- a/openwrt/target/linux/control/kmod-fs-ext3.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-fs-ext3
-Priority: optional
-Section: sys
-Description: Kernel modules for EXT3 filesystem support
diff --git a/openwrt/target/linux/control/kmod-fs-hfsplus.control b/openwrt/target/linux/control/kmod-fs-hfsplus.control
deleted file mode 100644
index bb59553338..0000000000
--- a/openwrt/target/linux/control/kmod-fs-hfsplus.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-fs-hfsplus
-Priority: optional
-Section: sys
-Description: Kernel modules for HFS+ filesystem support
diff --git a/openwrt/target/linux/control/kmod-fs-minix.control b/openwrt/target/linux/control/kmod-fs-minix.control
deleted file mode 100644
index 2169ba6acd..0000000000
--- a/openwrt/target/linux/control/kmod-fs-minix.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-fs-minix
-Priority: optional
-Section: sys
-Description: Kernel modules for MINIX filesystem support
diff --git a/openwrt/target/linux/control/kmod-fs-nfs.control b/openwrt/target/linux/control/kmod-fs-nfs.control
deleted file mode 100644
index 32dc9ff323..0000000000
--- a/openwrt/target/linux/control/kmod-fs-nfs.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-fs-nfs
-Priority: optional
-Section: sys
-Description: Kernel modules for NFS support
diff --git a/openwrt/target/linux/control/kmod-fs-vfat.control b/openwrt/target/linux/control/kmod-fs-vfat.control
deleted file mode 100644
index cc2983313d..0000000000
--- a/openwrt/target/linux/control/kmod-fs-vfat.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-fs-vfat
-Priority: optional
-Section: sys
-Description: Kernel modules for VFAT filesystem support
diff --git a/openwrt/target/linux/control/kmod-fs-xfs.control b/openwrt/target/linux/control/kmod-fs-xfs.control
deleted file mode 100644
index 8efd35a666..0000000000
--- a/openwrt/target/linux/control/kmod-fs-xfs.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-fs-xfs
-Priority: optional
-Section: sys
-Description: Kernel modules for XFS filesystem support
diff --git a/openwrt/target/linux/control/kmod-gre.control b/openwrt/target/linux/control/kmod-gre.control
deleted file mode 100644
index 42db0cce54..0000000000
--- a/openwrt/target/linux/control/kmod-gre.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-gre
-Priority: optional
-Section: sys
-Description: Kernel GRE tunneling support
diff --git a/openwrt/target/linux/control/kmod-ide.control b/openwrt/target/linux/control/kmod-ide.control
deleted file mode 100644
index 2b02d82257..0000000000
--- a/openwrt/target/linux/control/kmod-ide.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ide
-Priority: optional
-Section: sys
-Description: Kernel modules IDE support
diff --git a/openwrt/target/linux/control/kmod-imq.control b/openwrt/target/linux/control/kmod-imq.control
deleted file mode 100644
index 78925a40b5..0000000000
--- a/openwrt/target/linux/control/kmod-imq.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-imq
-Priority: optional
-Section: net
-Description: Kernel support for the Intermediate Queueing device
diff --git a/openwrt/target/linux/control/kmod-ip6tables.control b/openwrt/target/linux/control/kmod-ip6tables.control
deleted file mode 100644
index 6ccf422ffb..0000000000
--- a/openwrt/target/linux/control/kmod-ip6tables.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ip6tables
-Priority: optional
-Section: net
-Description: Kernel modules for ip6tables
diff --git a/openwrt/target/linux/control/kmod-ipip.control b/openwrt/target/linux/control/kmod-ipip.control
deleted file mode 100644
index 99bf0ec34b..0000000000
--- a/openwrt/target/linux/control/kmod-ipip.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ipip
-Section: sys
-Priority: optional
-Description: IP in IP encapsulation support
diff --git a/openwrt/target/linux/control/kmod-ipt-conntrack.control b/openwrt/target/linux/control/kmod-ipt-conntrack.control
deleted file mode 100644
index 3528ec4e0b..0000000000
--- a/openwrt/target/linux/control/kmod-ipt-conntrack.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ipt-conntrack
-Priority: optional
-Section: net
-Description: Extra Netfilter (IPv4) kernel modules for connection tracking
diff --git a/openwrt/target/linux/control/kmod-ipt-extra.control b/openwrt/target/linux/control/kmod-ipt-extra.control
deleted file mode 100644
index d336cc3006..0000000000
--- a/openwrt/target/linux/control/kmod-ipt-extra.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ipt-extra
-Priority: optional
-Section: net
-Description: Other extra Netfilter (IPv4) kernel modules
diff --git a/openwrt/target/linux/control/kmod-ipt-filter.control b/openwrt/target/linux/control/kmod-ipt-filter.control
deleted file mode 100644
index 8f5684d492..0000000000
--- a/openwrt/target/linux/control/kmod-ipt-filter.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ipt-filter
-Priority: optional
-Section: net
-Description: Netfilter (IPv4) kernel modules for packet content inspection
diff --git a/openwrt/target/linux/control/kmod-ipt-ipopt.control b/openwrt/target/linux/control/kmod-ipt-ipopt.control
deleted file mode 100644
index f0c9856d00..0000000000
--- a/openwrt/target/linux/control/kmod-ipt-ipopt.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ipt-ipopt
-Priority: optional
-Section: net
-Description: Netfilter (IPv4) kernel modules for matching/changing IP packet options
diff --git a/openwrt/target/linux/control/kmod-ipt-ipsec.control b/openwrt/target/linux/control/kmod-ipt-ipsec.control
deleted file mode 100644
index 6baa3d4448..0000000000
--- a/openwrt/target/linux/control/kmod-ipt-ipsec.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ipt-ipsec
-Priority: optional
-Section: net
-Description: Netfilter (IPv4) kernel modules for matching special IPsec packets
diff --git a/openwrt/target/linux/control/kmod-ipt-nat-extra.control b/openwrt/target/linux/control/kmod-ipt-nat-extra.control
deleted file mode 100644
index 84b429453b..0000000000
--- a/openwrt/target/linux/control/kmod-ipt-nat-extra.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ipt-nat-extra
-Priority: optional
-Section: net
-Description: Extra Netfilter (IPv4) NAT kernel modules for special protocols
diff --git a/openwrt/target/linux/control/kmod-ipt-nat.control b/openwrt/target/linux/control/kmod-ipt-nat.control
deleted file mode 100644
index 89fc8434b6..0000000000
--- a/openwrt/target/linux/control/kmod-ipt-nat.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ipt-nat
-Priority: optional
-Section: net
-Description: Netfilter (IPv4) kernel modules for different NAT targets
diff --git a/openwrt/target/linux/control/kmod-ipt-queue.control b/openwrt/target/linux/control/kmod-ipt-queue.control
deleted file mode 100644
index ba96eb5c20..0000000000
--- a/openwrt/target/linux/control/kmod-ipt-queue.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ipt-queue
-Priority: optional
-Section: net
-Description: Netfilter (IPv4) kernel module for user-space packet queuing
diff --git a/openwrt/target/linux/control/kmod-ipt-ulog.control b/openwrt/target/linux/control/kmod-ipt-ulog.control
deleted file mode 100644
index 2ce0fdcae7..0000000000
--- a/openwrt/target/linux/control/kmod-ipt-ulog.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ipt-ulog
-Priority: optional
-Section: net
-Description: Netfilter (IPv4) kernel module for user-space packet logging
diff --git a/openwrt/target/linux/control/kmod-iptables-extra.control b/openwrt/target/linux/control/kmod-iptables-extra.control
deleted file mode 100644
index 96a3b1acc0..0000000000
--- a/openwrt/target/linux/control/kmod-iptables-extra.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-iptables-extra
-Priority: optional
-Section: net
-Description: Extra kernel modules for iptables
diff --git a/openwrt/target/linux/control/kmod-iptables.control b/openwrt/target/linux/control/kmod-iptables.control
deleted file mode 100644
index 7f97cc44b6..0000000000
--- a/openwrt/target/linux/control/kmod-iptables.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-iptables
-Priority: optional
-Section: net
-Description: kernel modules for iptables
diff --git a/openwrt/target/linux/control/kmod-ipv6.control b/openwrt/target/linux/control/kmod-ipv6.control
deleted file mode 100644
index 3a6ccc9920..0000000000
--- a/openwrt/target/linux/control/kmod-ipv6.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ipv6
-Priority: optional
-Section: net
-Description: Kernel modules for the IPv6 protocol
diff --git a/openwrt/target/linux/control/kmod-loop.control b/openwrt/target/linux/control/kmod-loop.control
deleted file mode 100644
index 48bcb835d6..0000000000
--- a/openwrt/target/linux/control/kmod-loop.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-loop
-Priority: optional
-Section: sys
-Description: Kernel module for mount loopback support 
diff --git a/openwrt/target/linux/control/kmod-lp.control b/openwrt/target/linux/control/kmod-lp.control
deleted file mode 100644
index 5d40813159..0000000000
--- a/openwrt/target/linux/control/kmod-lp.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-lp
-Priority: optional
-Section: sys
-Description: Kernel modules for parallel port support and line printer
diff --git a/openwrt/target/linux/control/kmod-mppe.control b/openwrt/target/linux/control/kmod-mppe.control
deleted file mode 100644
index e4aa4c963a..0000000000
--- a/openwrt/target/linux/control/kmod-mppe.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-mppe
-Priority: optional
-Section: net
-Description: Microsoft PPP Encryption/Compression support
diff --git a/openwrt/target/linux/control/kmod-nbd.control b/openwrt/target/linux/control/kmod-nbd.control
deleted file mode 100644
index 3c467223bf..0000000000
--- a/openwrt/target/linux/control/kmod-nbd.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-nbd
-Priority: optional
-Section: sys
-Description: Kernel module for network block device
diff --git a/openwrt/target/linux/control/kmod-net-3c59x.control b/openwrt/target/linux/control/kmod-net-3c59x.control
deleted file mode 100644
index 8d2b880056..0000000000
--- a/openwrt/target/linux/control/kmod-net-3c59x.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-net-3c59x
-Priority: optional
-Section: sys
-Description: 3Com 3c590/3c900 series (592/595/597) "Vortex/Boomerang" cards kernel support
diff --git a/openwrt/target/linux/control/kmod-net-8139too.control b/openwrt/target/linux/control/kmod-net-8139too.control
deleted file mode 100644
index a3ad9afc60..0000000000
--- a/openwrt/target/linux/control/kmod-net-8139too.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-net-8139too
-Priority: optional
-Section: sys
-Description: RealTek RTL-8139 PCI Fast Ethernet Adapter kernel support
diff --git a/openwrt/target/linux/control/kmod-net-airo.control b/openwrt/target/linux/control/kmod-net-airo.control
deleted file mode 100644
index 3693df589b..0000000000
--- a/openwrt/target/linux/control/kmod-net-airo.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-net-airo
-Priority: optional
-Section: sys
-Description: Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards kernel support
diff --git a/openwrt/target/linux/control/kmod-net-e100.control b/openwrt/target/linux/control/kmod-net-e100.control
deleted file mode 100644
index bd5537b3f2..0000000000
--- a/openwrt/target/linux/control/kmod-net-e100.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-net-e100
-Priority: optional
-Section: sys
-Description: Intel(R) PRO/100+ cards kernel support
diff --git a/openwrt/target/linux/control/kmod-net-hermes-pci.control b/openwrt/target/linux/control/kmod-net-hermes-pci.control
deleted file mode 100644
index 911609d4f6..0000000000
--- a/openwrt/target/linux/control/kmod-net-hermes-pci.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-net-hermes-pci
-Priority: optional
-Section: sys
-Description: Intersil Prism 2.5 PCI 802.11b adaptor support
diff --git a/openwrt/target/linux/control/kmod-net-hermes-plx.control b/openwrt/target/linux/control/kmod-net-hermes-plx.control
deleted file mode 100644
index 8df07274d9..0000000000
--- a/openwrt/target/linux/control/kmod-net-hermes-plx.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-net-hermes-plx
-Priority: optional
-Section: sys
-Description: Hermes in PLX9052 based PCI adaptor (Netgear MA301, etc.) kernel support
diff --git a/openwrt/target/linux/control/kmod-net-hermes.control b/openwrt/target/linux/control/kmod-net-hermes.control
deleted file mode 100644
index 7fa91a9d20..0000000000
--- a/openwrt/target/linux/control/kmod-net-hermes.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-net-hermes
-Priority: optional
-Section: sys
-Description: Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) kernel support
diff --git a/openwrt/target/linux/control/kmod-net-natsemi.control b/openwrt/target/linux/control/kmod-net-natsemi.control
deleted file mode 100644
index 740ade67d6..0000000000
--- a/openwrt/target/linux/control/kmod-net-natsemi.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-net-natsemi
-Priority: optional
-Section: sys
-Description: National Semiconductor DP8381x series PCI Ethernet kernel support
diff --git a/openwrt/target/linux/control/kmod-net-prism54.control b/openwrt/target/linux/control/kmod-net-prism54.control
deleted file mode 100644
index 2ba3111ea6..0000000000
--- a/openwrt/target/linux/control/kmod-net-prism54.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-net-prism54
-Priority: optional
-Section: sys
-Description: Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support
diff --git a/openwrt/target/linux/control/kmod-nls-base.control b/openwrt/target/linux/control/kmod-nls-base.control
deleted file mode 100644
index 067f5dec86..0000000000
--- a/openwrt/target/linux/control/kmod-nls-base.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-nls-base
-Priority: optional
-Section: sys
-Description: Kernel modules for basic native language support
diff --git a/openwrt/target/linux/control/kmod-nls-cp437.control b/openwrt/target/linux/control/kmod-nls-cp437.control
deleted file mode 100644
index f47146083f..0000000000
--- a/openwrt/target/linux/control/kmod-nls-cp437.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-nls-cp437
-Priority: optional
-Section: sys
-Description: Kernel module for codepage 437
diff --git a/openwrt/target/linux/control/kmod-nls-cp850.control b/openwrt/target/linux/control/kmod-nls-cp850.control
deleted file mode 100644
index 1a7d083f90..0000000000
--- a/openwrt/target/linux/control/kmod-nls-cp850.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-nls-cp850
-Priority: optional
-Section: sys
-Description: Kernel module for codepage 850
diff --git a/openwrt/target/linux/control/kmod-nls-iso8859-1.control b/openwrt/target/linux/control/kmod-nls-iso8859-1.control
deleted file mode 100644
index 91e40faa7a..0000000000
--- a/openwrt/target/linux/control/kmod-nls-iso8859-1.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-nls-iso8859-1
-Priority: optional
-Section: sys
-Description: Kernel module for iso8859-1 charset support
diff --git a/openwrt/target/linux/control/kmod-nls-iso8859-15.control b/openwrt/target/linux/control/kmod-nls-iso8859-15.control
deleted file mode 100644
index f565e379e9..0000000000
--- a/openwrt/target/linux/control/kmod-nls-iso8859-15.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-nls-iso8859-15
-Priority: optional
-Section: sys
-Description: Kernel module for iso8859-15 charset support
diff --git a/openwrt/target/linux/control/kmod-nls-utf8.control b/openwrt/target/linux/control/kmod-nls-utf8.control
deleted file mode 100644
index 8c5b23c37e..0000000000
--- a/openwrt/target/linux/control/kmod-nls-utf8.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-nls-utf8
-Priority: optional
-Section: sys
-Description: Kernel module for utf8 support
diff --git a/openwrt/target/linux/control/kmod-pcmcia-core.control b/openwrt/target/linux/control/kmod-pcmcia-core.control
deleted file mode 100644
index 3e137ea06d..0000000000
--- a/openwrt/target/linux/control/kmod-pcmcia-core.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-pcmcia-core
-Priority: optional
-Section: sys
-Description: PCMCIA/CardBus kernel support
diff --git a/openwrt/target/linux/control/kmod-pcmcia-serial.control b/openwrt/target/linux/control/kmod-pcmcia-serial.control
deleted file mode 100644
index 7e8a03c957..0000000000
--- a/openwrt/target/linux/control/kmod-pcmcia-serial.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-pcmcia-serial
-Priority: optional
-Section: sys
-Description: PCMCIA/CardBus serial device support
diff --git a/openwrt/target/linux/control/kmod-ppp.control b/openwrt/target/linux/control/kmod-ppp.control
deleted file mode 100644
index d851e6526e..0000000000
--- a/openwrt/target/linux/control/kmod-ppp.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-ppp
-Priority: optional
-Section: net
-Description: PPP support
diff --git a/openwrt/target/linux/control/kmod-pppoatm.control b/openwrt/target/linux/control/kmod-pppoatm.control
deleted file mode 100644
index c777362ab7..0000000000
--- a/openwrt/target/linux/control/kmod-pppoatm.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-pppoatm
-Priority: optional
-Section: net
-Description: PPP over ATM support
diff --git a/openwrt/target/linux/control/kmod-pppoe.control b/openwrt/target/linux/control/kmod-pppoe.control
deleted file mode 100644
index 3216e2c889..0000000000
--- a/openwrt/target/linux/control/kmod-pppoe.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-pppoe
-Priority: optional
-Section: net
-Description: PPP over Ethernet support
diff --git a/openwrt/target/linux/control/kmod-pwc.control b/openwrt/target/linux/control/kmod-pwc.control
deleted file mode 100644
index 2860eedf3d..0000000000
--- a/openwrt/target/linux/control/kmod-pwc.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-pwc
-Priority: optional
-Section: sys
-Description: Kernel driver for USB Philips Cameras
diff --git a/openwrt/target/linux/control/kmod-sangam-atm-annex-a.control b/openwrt/target/linux/control/kmod-sangam-atm-annex-a.control
deleted file mode 100644
index e07e724565..0000000000
--- a/openwrt/target/linux/control/kmod-sangam-atm-annex-a.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-sangam-atm-annex-a
-Priority: optional
-Section: sys
-Description: AR7 Sangam ATM/ADSL driver (Annex A version)
diff --git a/openwrt/target/linux/control/kmod-sangam-atm-annex-b.control b/openwrt/target/linux/control/kmod-sangam-atm-annex-b.control
deleted file mode 100644
index 7e6ff3f63e..0000000000
--- a/openwrt/target/linux/control/kmod-sangam-atm-annex-b.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-sangam-atm-annex-b
-Priority: optional
-Section: sys
-Description: AR7 Sangam ATM/ADSL driver (Annex B version)
diff --git a/openwrt/target/linux/control/kmod-sched.control b/openwrt/target/linux/control/kmod-sched.control
deleted file mode 100644
index 53e993de47..0000000000
--- a/openwrt/target/linux/control/kmod-sched.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-sched
-Priority: optional
-Section: sys
-Description: Kernel schedulers for IP traffic
diff --git a/openwrt/target/linux/control/kmod-softdog.control b/openwrt/target/linux/control/kmod-softdog.control
deleted file mode 100644
index 01aff7fe8e..0000000000
--- a/openwrt/target/linux/control/kmod-softdog.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-softdog
-Priority: optional
-Section: sys
-Description: Kernel software watchdog driver
diff --git a/openwrt/target/linux/control/kmod-soundcore.control b/openwrt/target/linux/control/kmod-soundcore.control
deleted file mode 100644
index 6b4fffa058..0000000000
--- a/openwrt/target/linux/control/kmod-soundcore.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-soundcore
-Priority: optional
-Section: sys
-Description: Kernel support for audio soundcards
diff --git a/openwrt/target/linux/control/kmod-tun.control b/openwrt/target/linux/control/kmod-tun.control
deleted file mode 100644
index b60a8feee5..0000000000
--- a/openwrt/target/linux/control/kmod-tun.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-tun
-Priority: optional
-Section: sys
-Description: Kernel TUN/TAP extension
diff --git a/openwrt/target/linux/control/kmod-usb-acm.control b/openwrt/target/linux/control/kmod-usb-acm.control
deleted file mode 100644
index 8d1fca496b..0000000000
--- a/openwrt/target/linux/control/kmod-usb-acm.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-acm
-Priority: optional
-Section: sys
-Description: Kernel modules for USB modems and ISDN
diff --git a/openwrt/target/linux/control/kmod-usb-atm-speedtouch.control b/openwrt/target/linux/control/kmod-usb-atm-speedtouch.control
deleted file mode 100644
index e8ded69d48..0000000000
--- a/openwrt/target/linux/control/kmod-usb-atm-speedtouch.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-atm-speedtouch
-Priority: optional
-Section: sys
-Description: Kernel driver for USB Speedtouch ADSL modem
diff --git a/openwrt/target/linux/control/kmod-usb-atm.control b/openwrt/target/linux/control/kmod-usb-atm.control
deleted file mode 100644
index 0f4adadd4a..0000000000
--- a/openwrt/target/linux/control/kmod-usb-atm.control
+++ /dev/null
@@ -1,5 +0,0 @@
-Package: kmod-usb-atm
-Priority: optional
-Section: sys
-Source: buildroot internal
-Description: Kernel modules for USB ATM support
diff --git a/openwrt/target/linux/control/kmod-usb-audio.control b/openwrt/target/linux/control/kmod-usb-audio.control
deleted file mode 100644
index d30b8f2c70..0000000000
--- a/openwrt/target/linux/control/kmod-usb-audio.control
+++ /dev/null
@@ -1,5 +0,0 @@
-Package: kmod-usb-audio
-Priority: optional
-Section: sys
-Depends: kmod-soundcore
-Description: Kernel Support for USB Soundcards
diff --git a/openwrt/target/linux/control/kmod-usb-core.control b/openwrt/target/linux/control/kmod-usb-core.control
deleted file mode 100644
index fa1c13bbd8..0000000000
--- a/openwrt/target/linux/control/kmod-usb-core.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-core
-Priority: optional
-Section: sys
-Description: Kernel Support for USB
diff --git a/openwrt/target/linux/control/kmod-usb-ohci.control b/openwrt/target/linux/control/kmod-usb-ohci.control
deleted file mode 100644
index 3d0edc863c..0000000000
--- a/openwrt/target/linux/control/kmod-usb-ohci.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-ohci
-Priority: optional
-Section: sys
-Description: Kernel driver for OHCI USB controllers
diff --git a/openwrt/target/linux/control/kmod-usb-printer.control b/openwrt/target/linux/control/kmod-usb-printer.control
deleted file mode 100644
index 1c47a3d176..0000000000
--- a/openwrt/target/linux/control/kmod-usb-printer.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-printer
-Priority: optional
-Section: sys
-Description: Kernel modules for USB Printer support
diff --git a/openwrt/target/linux/control/kmod-usb-serial-belkin.control b/openwrt/target/linux/control/kmod-usb-serial-belkin.control
deleted file mode 100644
index d907a9702b..0000000000
--- a/openwrt/target/linux/control/kmod-usb-serial-belkin.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-serial-belkin
-Priority: optional
-Section: sys
-Description: Kernel Support for Belkin USB-to-Serial converters
diff --git a/openwrt/target/linux/control/kmod-usb-serial-ftdi.control b/openwrt/target/linux/control/kmod-usb-serial-ftdi.control
deleted file mode 100644
index e845294a5f..0000000000
--- a/openwrt/target/linux/control/kmod-usb-serial-ftdi.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-serial-ftdi
-Priority: optional
-Section: sys
-Description: Kernel Support for FTDI USB-to-Serial converters
diff --git a/openwrt/target/linux/control/kmod-usb-serial-mct-u232.control b/openwrt/target/linux/control/kmod-usb-serial-mct-u232.control
deleted file mode 100644
index b52b7ca7b3..0000000000
--- a/openwrt/target/linux/control/kmod-usb-serial-mct-u232.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-serial-mct-u232
-Priority: optional
-Section: sys
-Description: Kernel Support for Magic Control Technology USB-to-Serial converters
diff --git a/openwrt/target/linux/control/kmod-usb-serial-pl2303.control b/openwrt/target/linux/control/kmod-usb-serial-pl2303.control
deleted file mode 100644
index 4de43bd510..0000000000
--- a/openwrt/target/linux/control/kmod-usb-serial-pl2303.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-serial-pl2303
-Priority: optional
-Section: sys
-Description: Kernel Support for Prolific PL2303 USB-to-Serial converters
diff --git a/openwrt/target/linux/control/kmod-usb-serial-visor.control b/openwrt/target/linux/control/kmod-usb-serial-visor.control
deleted file mode 100644
index 951c00c51f..0000000000
--- a/openwrt/target/linux/control/kmod-usb-serial-visor.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-serial-visor
-Priority: optional
-Section: sys
-Description: Kernel Support for Handspring Visor / Palm m50x / Sony Clie Driver
diff --git a/openwrt/target/linux/control/kmod-usb-serial.control b/openwrt/target/linux/control/kmod-usb-serial.control
deleted file mode 100644
index 136fca752f..0000000000
--- a/openwrt/target/linux/control/kmod-usb-serial.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-serial
-Priority: optional
-Section: sys
-Description: Kernel Support for USB-to-Serial converters
diff --git a/openwrt/target/linux/control/kmod-usb-storage.control b/openwrt/target/linux/control/kmod-usb-storage.control
deleted file mode 100644
index 4ee70eb8a9..0000000000
--- a/openwrt/target/linux/control/kmod-usb-storage.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-storage
-Priority: optional
-Section: sys
-Description: Kernel modules for USB storage support
diff --git a/openwrt/target/linux/control/kmod-usb-uhci.control b/openwrt/target/linux/control/kmod-usb-uhci.control
deleted file mode 100644
index 09966a8a0e..0000000000
--- a/openwrt/target/linux/control/kmod-usb-uhci.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb-uhci
-Priority: optional
-Section: sys
-Description: Kernel driver for UHCI USB controllers
diff --git a/openwrt/target/linux/control/kmod-usb2.control b/openwrt/target/linux/control/kmod-usb2.control
deleted file mode 100644
index 338865e524..0000000000
--- a/openwrt/target/linux/control/kmod-usb2.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-usb2
-Priority: optional
-Section: sys
-Description: Kernel driver for USB2 controllers
diff --git a/openwrt/target/linux/control/kmod-videodev.control b/openwrt/target/linux/control/kmod-videodev.control
deleted file mode 100644
index 57c0b1cdfe..0000000000
--- a/openwrt/target/linux/control/kmod-videodev.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-videodev
-Priority: optional
-Section: sys
-Description: Video For Linux kernel support
diff --git a/openwrt/target/linux/control/kmod-wd1100.control b/openwrt/target/linux/control/kmod-wd1100.control
deleted file mode 100644
index 32163200ec..0000000000
--- a/openwrt/target/linux/control/kmod-wd1100.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-wd1100
-Priority: optional
-Section: sys
-Description: NatSemi SC1x00 series Watchdog kernel support
diff --git a/openwrt/target/linux/generic-2.4/README b/openwrt/target/linux/generic-2.4/README
deleted file mode 100644
index 15d95232d7..0000000000
--- a/openwrt/target/linux/generic-2.4/README
+++ /dev/null
@@ -1,98 +0,0 @@
-Description of kernel patches:
-
-
-generic/
-	Generic patches for vanilla Linux kernel
-
-000-linux_mips.patch
-	This is the diff between vanilla linux-2.4.32 and linux-mips.org kernel
-	(CVS tag 2_4_32-rc1 used). The kernel source from linux-mips.org CVS repository has
-	newer drivers and code then vanilla linux-2.4.32 especially for the mips architecture.
-
-001-squashfs.patch
-	Support for the squashfs filesystem. It has better compression ratio then cramfs.
-
-002-squashfs_lzma.patch
-	LZMA Addon patch from Oleg I. Vdovikin for the squashfs filesystem. 
-	Even better compression ratio. 
-
-003-jffs2_compression.patch
-	Compression for jffs2 filesystem.
-
-004-exec_pagesize.patch
-
-005-mtd_flashtypes.patch
-	Additional mtd drivers for flash chips
-
-100-ebtables.patch
-	Filtering packets on ethernet layer. See http://ebtables.sf.net
-
-101-netfilter_ipp2p.patch
-	Netfilter ipp2p match module (matches traffic of most P2P networks)
-
-102-netfilter_layer7.patch
-
-103-netfilter_nat_pptp.patch
-	NAT support for PPTP and GRE
-
-104-netfilter_maxconn.patch
-
-105-netfilter_TTL.patch
-	Netfilter target for manipulating the TTL of IP packets
-
-106-mppe_mppc.patch
-	Microsoft PPP Encryption/Compression
-
-107-cifs.patch
-	CIFS (Common Internet File System) module.
-
-108-optional_aout_support.patch
-
-109-ipsec_nat_traversal.patch
-	Openswan patch for allowing IPSec through NAT
-
-110-netdev_random_core.patch
-	Support for gathering entropy from network devices for /dev/random
-
-200-i4l.patch
-
-201-hfc_usb_backport.patch
-
-202-pl2303_backport.patch
-
-203-hfsplus_fix.patch
-
-204-net_b44.patch
-	Support for the BCM47xx chipset in the b44 driver
-
-206-gcc_3.4_fixes.patch
-	mips specific gcc 3.4 fixes
-
-207-gcc_4.0_fixes.patch
-	gcc 4.0 fixes
-
-
-brcm/
-	Broadcom specific patches
-
-001-bcm47xx.patch
-	This is the broadcom specific code from asus (1941) GPL source tarball. 
-	There are many small patches included, so it works with linux 2.4.32 kernel. 
-	The original code is based on Linux 2.4.20.
-
-002-wl_fix.patch
-	The driver for the wireless lan chip on brcm47xx based routers is binary only. 
-	This means it depends on older data structures in the kernel. We backported some
-	of the changes or changed some of the data structures to work with the binary modul. 
-	This is a really bad hack, but without source code, there is no better chance to get
-	the driver working with newer kernels.
-
-003-bcm47xx_cache_fixes.patch
-
-
-ar7/
-	TI AR7 specific patches
-
-000-ar7_support.patch
-
-001-flash_map.patch
diff --git a/openwrt/target/linux/generic-2.4/modules.mk b/openwrt/target/linux/generic-2.4/modules.mk
deleted file mode 100644
index 540ac715cc..0000000000
--- a/openwrt/target/linux/generic-2.4/modules.mk
+++ /dev/null
@@ -1,320 +0,0 @@
-include ../netfilter.mk
-
-# Networking
-
-$(eval $(call KMOD_template,ATM,atm,\
-	$(MODULES_DIR)/kernel/net/atm/atm.o \
-	$(MODULES_DIR)/kernel/net/atm/br2684.o \
-,CONFIG_ATM,,50,atm))
-
-$(eval $(call KMOD_template,GRE,gre,\
-	$(MODULES_DIR)/kernel/net/ipv4/ip_gre.o \
-,CONFIG_NET_IPGRE))
-
-$(eval $(call KMOD_template,IMQ,imq,\
-	$(MODULES_DIR)/kernel/net/ipv4/netfilter/*IMQ*.o \
-	$(MODULES_DIR)/kernel/drivers/net/imq.o \
-))
-$(eval $(call KMOD_template,IPIP,ipip,\
-	$(MODULES_DIR)/kernel/net/ipv4/ipip.o \
-,CONFIG_NET_IPIP,,60,ipip))
-
-$(eval $(call KMOD_template,IPV6,ipv6,\
-	$(MODULES_DIR)/kernel/net/ipv6/ipv6.o \
-,CONFIG_IPV6,,20,ipv6))
-
-$(eval $(call KMOD_template,PPP,ppp,\
-	$(MODULES_DIR)/kernel/drivers/net/ppp_async.o \
-	$(MODULES_DIR)/kernel/drivers/net/ppp_generic.o \
-	$(MODULES_DIR)/kernel/drivers/net/slhc.o \
-	$(MODULES_DIR)/kernel/drivers/net/pppox.o \
-,CONFIG_PPP))
-
-$(eval $(call KMOD_template,MPPE,mppe,\
-	$(MODULES_DIR)/kernel/drivers/net/ppp_mppe_mppc.o \
-,CONFIG_PPP_MPPE_MPPC))
-
-$(eval $(call KMOD_template,PPPOATM,pppoatm,\
-	$(MODULES_DIR)/kernel/net/atm/pppoatm.o \
-,CONFIG_PPPOATM))
-
-$(eval $(call KMOD_template,PPPOE,pppoe,\
-	$(MODULES_DIR)/kernel/drivers/net/pppoe.o \
-,CONFIG_PPPOE))
-
-$(eval $(call KMOD_template,SCHED,sched,\
-	$(MODULES_DIR)/kernel/net/sched/*.o \
-))
-
-$(eval $(call KMOD_template,TUN,tun,\
-	$(MODULES_DIR)/kernel/drivers/net/tun.o \
-,CONFIG_TUN,,20,tun))
-
-# Filtering / Firewalling
-
-$(eval $(call KMOD_template,ARPTABLES,arptables,\
-	$(MODULES_DIR)/kernel/net/ipv4/netfilter/arp*.o \
-,CONFIG_IP_NF_ARPTABLES))
-
-$(eval $(call KMOD_template,EBTABLES,ebtables,\
-	$(MODULES_DIR)/kernel/net/bridge/netfilter/*.o \
-,CONFIG_BRIDGE_NF_EBTABLES))
-
-# metapackage for compatibility ...
-$(eval $(call KMOD_template,IPTABLES_EXTRA,iptables-extra,\
-,,kmod-ipt-conntrack kmod-ipt-extra kmod-ipt-filter kmod-ipt-ipopt kmod-ipt-ipsec kmod-ipt-nat kmod-ipt-nat-extra kmod-ipt-queue kmod-ipt-ulogd))
-
-$(eval $(call KMOD_template,IPT_CONNTRACK,ipt-conntrack,\
-	$(foreach mod,$(IPT_CONNTRACK-m),$(MODULES_DIR)/kernel/net/ipv4/netfilter/$(mod).o) \
-))
-
-$(eval $(call KMOD_template,IPT_EXTRA,ipt-extra,\
-	$(foreach mod,$(IPT_EXTRA-m),$(MODULES_DIR)/kernel/net/ipv4/netfilter/$(mod).o) \
-))
-
-$(eval $(call KMOD_template,IPT_FILTER,ipt-filter,\
-	$(foreach mod,$(IPT_FILTER-m),$(MODULES_DIR)/kernel/net/ipv4/netfilter/$(mod).o) \
-))
-
-$(eval $(call KMOD_template,IPT_IPOPT,ipt-ipopt,\
-	$(foreach mod,$(IPT_IPOPT-m),$(MODULES_DIR)/kernel/net/ipv4/netfilter/$(mod).o) \
-))
-
-$(eval $(call KMOD_template,IPT_IPSEC,ipt-ipsec,\
-	$(foreach mod,$(IPT_IPSEC-m),$(MODULES_DIR)/kernel/net/ipv4/netfilter/$(mod).o) \
-))
-
-$(eval $(call KMOD_template,IPT_NAT,ipt-nat,\
-	$(foreach mod,$(IPT_NAT-m),$(MODULES_DIR)/kernel/net/ipv4/netfilter/$(mod).o) \
-))
-
-$(eval $(call KMOD_template,IPT_NAT_EXTRA,ipt-nat-extra,\
-	$(foreach mod,$(IPT_NAT_EXTRA-m),$(MODULES_DIR)/kernel/net/ipv4/netfilter/$(mod).o) \
-,,,40,$(IPT_NAT_EXTRA-m)))
-
-$(eval $(call KMOD_template,IPT_QUEUE,ipt-queue,\
-	$(foreach mod,$(IPT_QUEUE-m),$(MODULES_DIR)/kernel/net/ipv4/netfilter/$(mod).o) \
-))
-
-$(eval $(call KMOD_template,IPT_ULOG,ipt-ulog,\
-	$(foreach mod,$(IPT_ULOG-m),$(MODULES_DIR)/kernel/net/ipv4/netfilter/$(mod).o) \
-))
-
-$(eval $(call KMOD_template,IP6TABLES,ip6tables,\
-	$(MODULES_DIR)/kernel/net/ipv6/netfilter/ip*.o \
-,CONFIG_IP6_NF_IPTABLES,kmod-ipv6))
-
-
-# Block devices
-
-$(eval $(call KMOD_template,IDE,ide,\
-	$(MODULES_DIR)/kernel/drivers/ide/*.o \
-	$(MODULES_DIR)/kernel/drivers/ide/*/*.o \
-,CONFIG_IDE,,20,pdc202xx_old ide-core ide-detect ide-disk))
-
-$(eval $(call KMOD_template,LOOP,loop,\
-    $(MODULES_DIR)/kernel/drivers/block/loop.o \
-,CONFIG_BLK_DEV_LOOP,,20,loop))
-
-$(eval $(call KMOD_template,NBD,nbd,\
-    $(MODULES_DIR)/kernel/drivers/block/nbd.o \
-,CONFIG_BLK_DEV_NBD,,20,nbd))
-
-
-# Crypto
-
-ifneq ($(wildcard $(MODULES_DIR)/kernel/crypto/*.o),)
-CONFIG_CRYPTO:=m
-endif
-$(eval $(call KMOD_template,CRYPTO,crypto,\
-	$(MODULES_DIR)/kernel/crypto/*.o \
-,CONFIG_CRYPTO))
-
-
-# Filesystems
-
-$(eval $(call KMOD_template,FS_CIFS,fs-cifs,\
-	$(MODULES_DIR)/kernel/fs/cifs/cifs.o \
-,CONFIG_CIFS,,30,cifs))
-
-$(eval $(call KMOD_template,FS_MINIX,fs-minix,\
-	$(MODULES_DIR)/kernel/fs/minix/*.o \
-,CONFIG_MINIX_FS,,30,minix))
-
-$(eval $(call KMOD_template,FS_EXT2,fs-ext2,\
-	$(MODULES_DIR)/kernel/fs/ext2/*.o \
-,CONFIG_EXT2_FS,,30,ext2))
-
-$(eval $(call KMOD_template,FS_EXT3,fs-ext3,\
-	$(MODULES_DIR)/kernel/fs/ext3/*.o \
-	$(MODULES_DIR)/kernel/fs/jbd/*.o \
-,CONFIG_EXT3_FS,,30,jbd ext3))
-
-$(eval $(call KMOD_template,FS_HFSPLUS,fs-hfsplus,\
-	$(MODULES_DIR)/kernel/fs/hfsplus/*.o \
-,CONFIG_HFSPLUS_FS,,30,hfsplus))
-
-$(eval $(call KMOD_template,FS_NFS,fs-nfs,\
-	$(MODULES_DIR)/kernel/fs/lockd/*.o \
-	$(MODULES_DIR)/kernel/fs/nfs/*.o \
-	$(MODULES_DIR)/kernel/net/sunrpc/*.o \
-,CONFIG_NFS_FS,,30,sunrpc lockd nfs))
-
-$(eval $(call KMOD_template,FS_VFAT,fs-vfat,\
-	$(MODULES_DIR)/kernel/fs/vfat/vfat.o \
-	$(MODULES_DIR)/kernel/fs/fat/fat.o \
-,CONFIG_VFAT_FS,,30,fat vfat))
-
-$(eval $(call KMOD_template,FS_XFS,fs-xfs,\
-	$(MODULES_DIR)/kernel/fs/xfs/*.o \
-,CONFIG_XFS_FS,,30,xfs))
-
-
-# Multimedia
-
-$(eval $(call KMOD_template,PWC,pwc,\
-	$(MODULES_DIR)/kernel/drivers/usb/pwc.o \
-,CONFIG_USB_PWC,kmod-videodev,63,pwc))
-
-$(eval $(call KMOD_template,SOUNDCORE,soundcore,\
-	$(MODULES_DIR)/kernel/drivers/sound/soundcore.o \
-,CONFIG_SOUND,,30,soundcore))
-
-$(eval $(call KMOD_template,VIDEODEV,videodev,\
-	$(MODULES_DIR)/kernel/drivers/media/video/videodev.o \
-,CONFIG_VIDEO_DEV,,62,videodev))
-
-
-# Network devices
-
-$(eval $(call KMOD_template,NET_3C59X,net-3c59x,\
-	$(MODULES_DIR)/kernel/drivers/net/3c59x.o \
-,CONFIG_VORTEX,,10,3c59x))
-
-$(eval $(call KMOD_template,NET_8139TOO,net-8139too,\
-	$(MODULES_DIR)/kernel/drivers/net/8139too.o \
-	$(MODULES_DIR)/kernel/drivers/net/mii.o \
-,CONFIG_8139TOO,,10,mii 8139too))
-
-$(eval $(call KMOD_template,NET_AIRO,net-airo,\
-	$(MODULES_DIR)/kernel/drivers/net/wireless/airo.o \
-,CONFIG_AIRO,,10,airo))
-
-$(eval $(call KMOD_template,NET_E100,net-e100,\
-	$(MODULES_DIR)/kernel/drivers/net/e100.o \
-,CONFIG_E100,,10,e100))
-
-$(eval $(call KMOD_template,NET_HERMES,net-hermes,\
-	$(MODULES_DIR)/kernel/drivers/net/wireless/hermes.o \
-	$(MODULES_DIR)/kernel/drivers/net/wireless/orinoco.o \
-,CONFIG_HERMES,,10,hermes orinoco))
-
-$(eval $(call KMOD_template,NET_HERMES_PCI,net-hermes-pci,\
-	$(MODULES_DIR)/kernel/drivers/net/wireless/orinoco_pci.o \
-,CONFIG_PCI_HERMES,kmod-net-hermes,11,orinoco_pci))
-
-$(eval $(call KMOD_template,NET_HERMES_PCI,net-hermes-plx,\
-	$(MODULES_DIR)/kernel/drivers/net/wireless/orinoco_plx.o \
-,CONFIG_PLX_HERMES,kmod-net-hermes,11,orinoco_plx))
-
-$(eval $(call KMOD_template,NET_NATSEMI,net-natsemi,\
-	$(MODULES_DIR)/kernel/drivers/net/natsemi.o \
-,CONFIG_NATSEMI,,10,natsemi))
-
-$(eval $(call KMOD_template,NET_PRISM54,net-prism54,\
-	$(MODULES_DIR)/kernel/drivers/net/wireless/prism54/prism54.o \
-,CONFIG_PRISM54,,10,prism54))
-
-
-# PCMCIA/CardBus
-
-$(eval $(call KMOD_template,PCMCIA_CORE,pcmcia-core,\
-	$(MODULES_DIR)/kernel/drivers/pcmcia/pcmcia_core.o \
-	$(MODULES_DIR)/kernel/drivers/pcmcia/yenta_socket.o \
-	$(MODULES_DIR)/kernel/drivers/pcmcia/ds.o \
-,CONFIG_PCMCIA,,50,pcmcia_core yenta_socket ds))
-
-$(eval $(call KMOD_template,PCMCIA_SERIAL,pcmcia-serial,\
-	$(MODULES_DIR)/kernel/drivers/char/pcmcia/serial_cs.o \
-,CONFIG_PCMCIA_SERIAL_CS,kmod-pcmcia-core,51,serial_cs))
-
-
-# USB
-
-$(eval $(call KMOD_template,USB,usb-core,\
-	$(MODULES_DIR)/kernel/drivers/usb/usbcore.o \
-,CONFIG_USB,,50,usbcore))
-
-$(eval $(call KMOD_template,USB_OHCI,usb-ohci,\
-	$(MODULES_DIR)/kernel/drivers/usb/host/usb-ohci.o \
-,CONFIG_USB_OHCI,kmod-usb-core,60,usb-ohci))
-
-$(eval $(call KMOD_template,USB_UHCI,usb-uhci,\
-	$(MODULES_DIR)/kernel/drivers/usb/host/uhci.o \
-,CONFIG_USB_UHCI_ALT,kmod-usb-core,60,uhci))
-
-$(eval $(call KMOD_template,USB2,usb2,\
-	$(MODULES_DIR)/kernel/drivers/usb/host/ehci-hcd.o \
-,CONFIG_USB_EHCI_HCD,kmod-usb-core,60,ehci-hcd))
-
-$(eval $(call KMOD_template,USB_ACM,usb-acm,\
-	$(MODULES_DIR)/kernel/drivers/usb/acm.o \
-,CONFIG_USB_ACM))
-
-$(eval $(call KMOD_template,USB_AUDIO,usb-audio,\
-	$(MODULES_DIR)/kernel/drivers/usb/audio.o \
-,CONFIG_USB_AUDIO,kmod-soundcore kmod-usb-core,61,audio))
-
-$(eval $(call KMOD_template,USB_PRINTER,usb-printer,\
-	$(MODULES_DIR)/kernel/drivers/usb/printer.o \
-,CONFIG_USB_PRINTER,kmod-usb-core,60,printer))
-
-$(eval $(call KMOD_template,USB_SERIAL,usb-serial,\
-	$(MODULES_DIR)/kernel/drivers/usb/serial/usbserial.o \
-,CONFIG_USB_SERIAL,kmod-usb-core,60,usbserial))
-
-$(eval $(call KMOD_template,USB_SERIAL_BELKIN,usb-serial-belkin,\
-	$(MODULES_DIR)/kernel/drivers/usb/serial/belkin_sa.o \
-,CONFIG_USB_SERIAL_BELKIN,kmod-usb-serial,61,belkin_sa))
-
-$(eval $(call KMOD_template,USB_SERIAL_FTDI,usb-serial-ftdi,\
-	$(MODULES_DIR)/kernel/drivers/usb/serial/ftdi_sio.o \
-,CONFIG_USB_SERIAL_FTDI_SIO,kmod-usb-serial,61,ftdi_sio))
-
-$(eval $(call KMOD_template,USB_SERIAL_MCT_U232,usb-serial-mct-u232,\
-	$(MODULES_DIR)/kernel/drivers/usb/serial/mct_u232.o \
-,CONFIG_USB_SERIAL_MCT_U232,kmod-usb-serial,61,mct_u232))
-
-$(eval $(call KMOD_template,USB_SERIAL_PL2303,usb-serial-pl2303,\
-	$(MODULES_DIR)/kernel/drivers/usb/serial/pl2303.o \
-,CONFIG_USB_SERIAL_PL2303,kmod-usb-serial,61,pl2303))
-
-$(eval $(call KMOD_template,USB_SERIAL_VISOR,usb-serial-visor,\
-	$(MODULES_DIR)/kernel/drivers/usb/serial/visor.o \
-,CONFIG_USB_SERIAL_VISOR,kmod-usb-serial,61,visor))
-
-$(eval $(call KMOD_template,USB_STORAGE,usb-storage,\
-	$(MODULES_DIR)/kernel/drivers/scsi/*.o \
-	$(MODULES_DIR)/kernel/drivers/usb/storage/*.o \
-,CONFIG_USB_STORAGE,kmod-usb-core,60,scsi_mod sd_mod usb-storage))
-
-
-# Misc. devices
-
-$(eval $(call KMOD_template,AX25,ax25,\
-	$(MODULES_DIR)/kernel/net/ax25/ax25.o \
-	$(MODULES_DIR)/kernel/drivers/net/hamradio/mkiss.o \
-,CONFIG_AX25,,90,ax25 mkiss))
-
-$(eval $(call KMOD_template,BLUETOOTH,bluetooth,\
-	$(MODULES_DIR)/kernel/net/bluetooth/*.o \
-	$(MODULES_DIR)/kernel/net/bluetooth/rfcomm/*.o \
-	$(MODULES_DIR)/kernel/drivers/bluetooth/*.o \
-,CONFIG_BLUEZ))
-
-$(eval $(call KMOD_template,SOFTDOG,softdog,\
-	$(MODULES_DIR)/kernel/drivers/char/softdog.o \
-,CONFIG_SOFT_WATCHDOG,,95,softdog))
-
-
-
diff --git a/openwrt/target/linux/generic-2.4/patches/000-linux_mips.patch b/openwrt/target/linux/generic-2.4/patches/000-linux_mips.patch
deleted file mode 100644
index 7fae1eefc6..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/000-linux_mips.patch
+++ /dev/null
@@ -1,27968 +0,0 @@
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/au1xxx_irqmap.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/au1xxx_irqmap.c
---- linux-2.4.32-rc1/arch/mips/au1000/common/au1xxx_irqmap.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/au1xxx_irqmap.c	2005-01-30 09:01:27.000000000 +0100
-@@ -172,14 +172,14 @@
- 	{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
- 	{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
- 	{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
--	{ AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 },
--	{ AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
--	{ AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
--	{ AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
--	{ AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 },
--	{ AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
--	{ AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
--	{ AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-+	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- 	{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
- 	{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
- 	{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
-@@ -200,14 +200,14 @@
- 	{ AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
- 	{ AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
- 	{ AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
--	{ AU1200_TOY_INT, INTC_INT_RISE_EDGE, 0 },
--	{ AU1200_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
--	{ AU1200_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
--	{ AU1200_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
--	{ AU1200_RTC_INT, INTC_INT_RISE_EDGE, 0 },
--	{ AU1200_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
--	{ AU1200_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
--	{ AU1200_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-+	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-+	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- 	{ AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
- 	{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
- 	{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/cputable.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/cputable.c
---- linux-2.4.32-rc1/arch/mips/au1000/common/cputable.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/cputable.c	2005-01-30 09:01:27.000000000 +0100
-@@ -39,7 +39,8 @@
-     { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
-     { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
-     { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
--    { 0xffffffff, 0x04030200, "Au1200 AA", 0, 1 },
-+    { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
-+    { 0xffffffff, 0x04030201, "Au1200 AC", 0, 0 },
-     { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
- };
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/dbdma.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/dbdma.c
---- linux-2.4.32-rc1/arch/mips/au1000/common/dbdma.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/dbdma.c	2005-02-08 07:28:37.000000000 +0100
-@@ -41,6 +41,8 @@
- #include <asm/au1xxx_dbdma.h>
- #include <asm/system.h>
- 
-+#include <linux/module.h>
-+
- #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
- 
- /*
-@@ -60,37 +62,10 @@
- */
- #define ALIGN_ADDR(x, a)	((((u32)(x)) + (a-1)) & ~(a-1))
- 
--static volatile dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
--static int dbdma_initialized;
-+static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
-+static int dbdma_initialized=0;
- static void au1xxx_dbdma_init(void);
- 
--typedef struct dbdma_device_table {
--	u32		dev_id;
--	u32		dev_flags;
--	u32		dev_tsize;
--	u32		dev_devwidth;
--	u32		dev_physaddr;		/* If FIFO */
--	u32		dev_intlevel;
--	u32		dev_intpolarity;
--} dbdev_tab_t;
--
--typedef struct dbdma_chan_config {
--	u32			chan_flags;
--	u32			chan_index;
--	dbdev_tab_t		*chan_src;
--	dbdev_tab_t		*chan_dest;
--	au1x_dma_chan_t		*chan_ptr;
--	au1x_ddma_desc_t	*chan_desc_base;
--	au1x_ddma_desc_t	*get_ptr, *put_ptr, *cur_ptr;
--	void			*chan_callparam;
--	void (*chan_callback)(int, void *, struct pt_regs *);
--} chan_tab_t;
--
--#define	DEV_FLAGS_INUSE		(1 << 0)
--#define	DEV_FLAGS_ANYUSE	(1 << 1)
--#define DEV_FLAGS_OUT		(1 << 2)
--#define DEV_FLAGS_IN		(1 << 3)
--
- static dbdev_tab_t dbdev_tab[] = {
- #ifdef CONFIG_SOC_AU1550
- 	/* UARTS */
-@@ -156,13 +131,13 @@
- 	{ DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- 	{ DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- 
--	{ DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
--	{ DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
--	{ DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
--	{ DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-+	{ DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
-+	{ DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
-+	{ DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
-+	{ DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
- 
--	{ DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
--	{ DSCR_CMD0_AES_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-+	{ DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
-+	{ DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
- 
- 	{ DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
- 	{ DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
-@@ -172,9 +147,9 @@
- 	{ DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
- 	{ DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- 
--	{ DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
--	{ DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
--	{ DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-+	{ DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
-+	{ DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
-+	{ DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
- 	{ DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- 
- 	{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-@@ -183,6 +158,24 @@
- 
- 	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- 	{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-+
-+	/* Provide 16 user definable device types */
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
-+	{ 0, 0, 0, 0, 0, 0, 0 },
- };
- 
- #define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t))
-@@ -202,6 +195,30 @@
- 	return NULL;
- }
- 
-+u32
-+au1xxx_ddma_add_device(dbdev_tab_t *dev)
-+{
-+	u32 ret = 0;
-+	dbdev_tab_t *p=NULL;
-+	static u16 new_id=0x1000;
-+
-+	p = find_dbdev_id(0);
-+	if ( NULL != p )
-+	{
-+		memcpy(p, dev, sizeof(dbdev_tab_t));
-+ 		p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
-+		ret = p->dev_id;
-+		new_id++;
-+#if 0
-+		printk("add_device: id:%x flags:%x padd:%x\n", 
-+				p->dev_id, p->dev_flags, p->dev_physaddr );
-+#endif
-+	}
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(au1xxx_ddma_add_device);
-+
- /* Allocate a channel and return a non-zero descriptor if successful.
- */
- u32
-@@ -214,7 +231,7 @@
- 	int		i;
- 	dbdev_tab_t	*stp, *dtp;
- 	chan_tab_t	*ctp;
--	volatile au1x_dma_chan_t *cp;
-+	au1x_dma_chan_t *cp;
- 
- 	/* We do the intialization on the first channel allocation.
- 	 * We have to wait because of the interrupt handler initialization
-@@ -224,9 +241,6 @@
- 		au1xxx_dbdma_init();
- 	dbdma_initialized = 1;
- 
--	if ((srcid > DSCR_NDEV_IDS) || (destid > DSCR_NDEV_IDS))
--		return 0;
--	
- 	if ((stp = find_dbdev_id(srcid)) == NULL) return 0;
- 	if ((dtp = find_dbdev_id(destid)) == NULL) return 0;
- 
-@@ -268,9 +282,9 @@
- 				/* If kmalloc fails, it is caught below same
- 				 * as a channel not available.
- 				 */
--				ctp = (chan_tab_t *)kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
-+				ctp = (chan_tab_t *)
-+					kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
- 				chan_tab_ptr[i] = ctp;
--				ctp->chan_index = chan = i;
- 				break;
- 			}
- 		}
-@@ -278,10 +292,11 @@
- 
- 		if (ctp != NULL) {
- 			memset(ctp, 0, sizeof(chan_tab_t));
-+			ctp->chan_index = chan = i;
- 			dcp = DDMA_CHANNEL_BASE;
- 			dcp += (0x0100 * chan);
- 			ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
--			cp = (volatile au1x_dma_chan_t *)dcp;
-+			cp = (au1x_dma_chan_t *)dcp;
- 			ctp->chan_src = stp;
- 			ctp->chan_dest = dtp;
- 			ctp->chan_callback = callback;
-@@ -298,6 +313,9 @@
- 				i |= DDMA_CFG_DED;
- 			if (dtp->dev_intpolarity)
- 				i |= DDMA_CFG_DP;
-+			if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
-+				(dtp->dev_flags & DEV_FLAGS_SYNC))
-+					i |= DDMA_CFG_SYNC;
- 			cp->ddma_cfg = i;
- 			au_sync();
- 
-@@ -308,14 +326,14 @@
- 			rv = (u32)(&chan_tab_ptr[chan]);
- 		}
- 		else {
--			/* Release devices.
--			*/
-+			/* Release devices */
- 			stp->dev_flags &= ~DEV_FLAGS_INUSE;
- 			dtp->dev_flags &= ~DEV_FLAGS_INUSE;
- 		}
- 	}
- 	return rv;
- }
-+EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
- 
- /* Set the device width if source or destination is a FIFO.
-  * Should be 8, 16, or 32 bits.
-@@ -343,6 +361,7 @@
- 
- 	return rv;
- }
-+EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
- 
- /* Allocate a descriptor ring, initializing as much as possible.
- */
-@@ -369,7 +388,8 @@
- 	 * and if we try that first we are likely to not waste larger
- 	 * slabs of memory.
- 	 */
--	desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL);
-+	desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), 
-+			GFP_KERNEL|GFP_DMA);
- 	if (desc_base == 0)
- 		return 0;
- 	
-@@ -380,7 +400,7 @@
- 		kfree((const void *)desc_base);
- 		i = entries * sizeof(au1x_ddma_desc_t);
- 		i += (sizeof(au1x_ddma_desc_t) - 1);
--		if ((desc_base = (u32)kmalloc(i, GFP_KERNEL)) == 0)
-+		if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
- 			return 0;
- 
- 		desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
-@@ -460,9 +480,14 @@
- 	/* If source input is fifo, set static address.
- 	*/
- 	if (stp->dev_flags & DEV_FLAGS_IN) {
--		src0 = stp->dev_physaddr;
--		src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
-+		if ( stp->dev_flags & DEV_FLAGS_BURSTABLE ) 
-+			src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
-+		else 
-+			src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
-+
- 	}
-+	if (stp->dev_physaddr) 
-+		src0 = stp->dev_physaddr;
- 
- 	/* Set up dest1.  For now, assume no stride and increment.
- 	 * A channel attribute update can change this later.
-@@ -486,10 +511,18 @@
- 	/* If destination output is fifo, set static address.
- 	*/
- 	if (dtp->dev_flags & DEV_FLAGS_OUT) {
--		dest0 = dtp->dev_physaddr;
-+		if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
-+	                dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
-+				else
- 		dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
- 	}
-+	if (dtp->dev_physaddr) 
-+		dest0 = dtp->dev_physaddr;
- 	
-+#if 0
-+		printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
-+			dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
-+#endif
- 	for (i=0; i<entries; i++) {
- 		dp->dscr_cmd0 = cmd0;
- 		dp->dscr_cmd1 = cmd1;
-@@ -498,6 +531,7 @@
- 		dp->dscr_dest0 = dest0;
- 		dp->dscr_dest1 = dest1;
- 		dp->dscr_stat = 0;
-+				dp->sw_context = dp->sw_status = 0;
- 		dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
- 		dp++;
- 	}
-@@ -510,13 +544,14 @@
- 
- 	return (u32)(ctp->chan_desc_base);
- }
-+EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
- 
- /* Put a source buffer into the DMA ring.
-  * This updates the source pointer and byte count.  Normally used
-  * for memory to fifo transfers.
-  */
- u32
--au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
-+_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
- {
- 	chan_tab_t		*ctp;
- 	au1x_ddma_desc_t	*dp;
-@@ -543,24 +578,40 @@
- 	*/
- 	dp->dscr_source0 = virt_to_phys(buf);
- 	dp->dscr_cmd1 = nbytes;
--	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
--	ctp->chan_ptr->ddma_dbell = 0xffffffff;	/* Make it go */
--	
-+	/* Check flags  */
-+	if (flags & DDMA_FLAGS_IE) 
-+		dp->dscr_cmd0 |= DSCR_CMD0_IE;
-+	if (flags & DDMA_FLAGS_NOIE)
-+		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
- 	/* Get next descriptor pointer.
- 	*/
- 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- 
-+	/*
-+	 * There is an errata on the Au1200/Au1550 parts that could result 
-+	 * in "stale" data being DMA'd. It has to do with the snoop logic on 
-+	 * the dache eviction buffer.  NONCOHERENT_IO is on by default for 
-+	 * these parts. If it is fixedin the future, these dma_cache_inv will 
-+	 * just be nothing more than empty macros. See io.h.
-+	 * */
-+	dma_cache_wback_inv(buf,nbytes);
-+        dp->dscr_cmd0 |= DSCR_CMD0_V;        /* Let it rip */
-+	au_sync();
-+	dma_cache_wback_inv(dp, sizeof(dp));
-+        ctp->chan_ptr->ddma_dbell = 0;
-+
- 	/* return something not zero.
- 	*/
- 	return nbytes;
- }
-+EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
- 
- /* Put a destination buffer into the DMA ring.
-  * This updates the destination pointer and byte count.  Normally used
-  * to place an empty buffer into the ring for fifo to memory transfers.
-  */
- u32
--au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
-+_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
- {
- 	chan_tab_t		*ctp;
- 	au1x_ddma_desc_t	*dp;
-@@ -582,11 +633,33 @@
- 	if (dp->dscr_cmd0 & DSCR_CMD0_V)
- 		return 0;
- 	
--	/* Load up buffer address and byte count.
--	*/
-+	/* Load up buffer address and byte count */
-+
-+	/* Check flags  */
-+	if (flags & DDMA_FLAGS_IE) 
-+		dp->dscr_cmd0 |= DSCR_CMD0_IE;
-+	if (flags & DDMA_FLAGS_NOIE)
-+		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
-+
- 	dp->dscr_dest0 = virt_to_phys(buf);
- 	dp->dscr_cmd1 = nbytes;
-+#if 0
-+	printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", 
-+			dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0, 
-+			dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
-+#endif
-+	/*
-+	 * There is an errata on the Au1200/Au1550 parts that could result in 
-+	 * "stale" data being DMA'd. It has to do with the snoop logic on the 
-+	 * dache eviction buffer. NONCOHERENT_IO is on by default for these 
-+	 * parts. If it is fixedin the future, these dma_cache_inv will just 
-+	 * be nothing more than empty macros. See io.h. 
-+	 * */
-+	dma_cache_inv(buf,nbytes);
- 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
-+	au_sync();
-+	dma_cache_wback_inv(dp, sizeof(dp));
-+        ctp->chan_ptr->ddma_dbell = 0;
- 	
- 	/* Get next descriptor pointer.
- 	*/
-@@ -596,6 +669,7 @@
- 	*/
- 	return nbytes;
- }
-+EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
- 
- /* Get a destination buffer into the DMA ring.
-  * Normally used to get a full buffer from the ring during fifo
-@@ -645,7 +719,7 @@
- au1xxx_dbdma_stop(u32 chanid)
- {
- 	chan_tab_t	*ctp;
--	volatile au1x_dma_chan_t *cp;
-+	au1x_dma_chan_t *cp;
- 	int halt_timeout = 0;
- 
- 	ctp = *((chan_tab_t **)chanid);
-@@ -665,6 +739,7 @@
- 	cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
- 	au_sync();
- }
-+EXPORT_SYMBOL(au1xxx_dbdma_stop);
- 
- /* Start using the current descriptor pointer.  If the dbdma encounters
-  * a not valid descriptor, it will stop.  In this case, we can just
-@@ -674,17 +749,17 @@
- au1xxx_dbdma_start(u32 chanid)
- {
- 	chan_tab_t	*ctp;
--	volatile au1x_dma_chan_t *cp;
-+	au1x_dma_chan_t *cp;
- 
- 	ctp = *((chan_tab_t **)chanid);
--
- 	cp = ctp->chan_ptr;
- 	cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
- 	cp->ddma_cfg |= DDMA_CFG_EN;	/* Enable channel */
- 	au_sync();
--	cp->ddma_dbell = 0xffffffff;	/* Make it go */
-+	cp->ddma_dbell = 0;
- 	au_sync();
- }
-+EXPORT_SYMBOL(au1xxx_dbdma_start);
- 
- void
- au1xxx_dbdma_reset(u32 chanid)
-@@ -703,15 +778,21 @@
- 
- 	do {
- 		dp->dscr_cmd0 &= ~DSCR_CMD0_V;
-+		/* reset our SW status -- this is used to determine 
-+		 * if a descriptor is in use by upper level SW. Since 
-+		 * posting can reset 'V' bit. 
-+		 */
-+		dp->sw_status = 0;
- 		dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- 	} while (dp != ctp->chan_desc_base);
- }
-+EXPORT_SYMBOL(au1xxx_dbdma_reset);
- 
- u32
- au1xxx_get_dma_residue(u32 chanid)
- {
- 	chan_tab_t	*ctp;
--	volatile au1x_dma_chan_t *cp;
-+	au1x_dma_chan_t *cp;
- 	u32		rv;
- 
- 	ctp = *((chan_tab_t **)chanid);
-@@ -746,15 +827,16 @@
- 
- 	kfree(ctp);
- }
-+EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
- 
- static void
- dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
--	u32	intstat;
-+	u32        				intstat, flags;
- 	u32	chan_index;
- 	chan_tab_t		*ctp;
- 	au1x_ddma_desc_t	*dp;
--	volatile au1x_dma_chan_t *cp;
-+	au1x_dma_chan_t *cp;
- 
- 	intstat = dbdma_gptr->ddma_intstat;
- 	au_sync();
-@@ -773,18 +855,26 @@
- 		(ctp->chan_callback)(irq, ctp->chan_callparam, regs);
- 
- 	ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
--	
- }
- 
--static void
--au1xxx_dbdma_init(void)
-+static void au1xxx_dbdma_init(void)
- {
-+	int irq_nr;
-+
- 	dbdma_gptr->ddma_config = 0;
- 	dbdma_gptr->ddma_throttle = 0;
- 	dbdma_gptr->ddma_inten = 0xffff;
- 	au_sync();
- 
--	if (request_irq(AU1550_DDMA_INT, dbdma_interrupt, SA_INTERRUPT,
-+#if defined(CONFIG_SOC_AU1550)
-+	irq_nr = AU1550_DDMA_INT;
-+#elif defined(CONFIG_SOC_AU1200)
-+	irq_nr = AU1200_DDMA_INT;
-+#else
-+	#error Unknown Au1x00 SOC
-+#endif
-+
-+	if (request_irq(irq_nr, dbdma_interrupt, SA_INTERRUPT,
- 			"Au1xxx dbdma", (void *)dbdma_gptr))
- 		printk("Can't get 1550 dbdma irq");
- }
-@@ -795,7 +885,8 @@
- 	chan_tab_t		*ctp;
- 	au1x_ddma_desc_t	*dp;
- 	dbdev_tab_t		*stp, *dtp;
--	volatile au1x_dma_chan_t *cp;
-+	au1x_dma_chan_t *cp;
-+		u32			i = 0;
- 
- 	ctp = *((chan_tab_t **)chanid);
- 	stp = ctp->chan_src;
-@@ -820,15 +911,64 @@
- 	dp = ctp->chan_desc_base;
- 
- 	do {
--		printk("dp %08x, cmd0 %08x, cmd1 %08x\n",
--			(u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
--		printk("src0 %08x, src1 %08x, dest0 %08x\n",
--			dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0);
--		printk("dest1 %08x, stat %08x, nxtptr %08x\n",
--			dp->dscr_dest1, dp->dscr_stat, dp->dscr_nxtptr);
-+                printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
-+                        i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
-+                printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
-+                        dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
-+                printk("stat %08x, nxtptr %08x\n",
-+                        dp->dscr_stat, dp->dscr_nxtptr);
- 		dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- 	} while (dp != ctp->chan_desc_base);
- }
- 
-+/* Put a descriptor into the DMA ring.
-+ * This updates the source/destination pointers and byte count.
-+ */
-+u32
-+au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
-+{
-+	chan_tab_t *ctp;
-+	au1x_ddma_desc_t *dp;
-+	u32 nbytes=0;
-+
-+	/* I guess we could check this to be within the
-+	* range of the table......
-+	*/
-+	ctp = *((chan_tab_t **)chanid);
-+
-+	/* We should have multiple callers for a particular channel,
-+	* an interrupt doesn't affect this pointer nor the descriptor,
-+	* so no locking should be needed.
-+	*/
-+	dp = ctp->put_ptr;
-+
-+	/* If the descriptor is valid, we are way ahead of the DMA
-+	* engine, so just return an error condition.
-+	*/
-+	if (dp->dscr_cmd0 & DSCR_CMD0_V)
-+		return 0;
-+
-+	/* Load up buffer addresses and byte count.
-+	*/
-+	dp->dscr_dest0 = dscr->dscr_dest0;
-+	dp->dscr_source0 = dscr->dscr_source0;
-+	dp->dscr_dest1 = dscr->dscr_dest1;
-+	dp->dscr_source1 = dscr->dscr_source1;
-+	dp->dscr_cmd1 = dscr->dscr_cmd1;
-+	nbytes = dscr->dscr_cmd1;
-+	/* Allow the caller to specifiy if an interrupt is generated */
-+	dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
-+	dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
-+	ctp->chan_ptr->ddma_dbell = 0;
-+
-+	/* Get next descriptor pointer.
-+	*/
-+	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
-+
-+	/* return something not zero.
-+	*/
-+	return nbytes;
-+}
-+
- #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/gpio.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/gpio.c
---- linux-2.4.32-rc1/arch/mips/au1000/common/gpio.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/gpio.c	2005-01-30 09:01:27.000000000 +0100
-@@ -0,0 +1,118 @@
-+/*
-+ *  This program is free software; you can redistribute	 it and/or modify it
-+ *  under  the terms of	 the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the	License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
-+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
-+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <asm/au1000.h>
-+#include <asm/au1xxx_gpio.h>
-+
-+#define gpio1 sys
-+#if !defined(CONFIG_SOC_AU1000)
-+static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
-+
-+#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
-+
-+int au1xxx_gpio2_read(int signal)
-+{
-+	signal -= 200;
-+/*	gpio2->dir &= ~(0x01 << signal);						//Set GPIO to input */
-+	return ((gpio2->pinstate >> signal) & 0x01);
-+}
-+
-+void au1xxx_gpio2_write(int signal, int value)
-+{
-+	signal -= 200;
-+
-+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) | 
-+		(value << signal);
-+}
-+
-+void au1xxx_gpio2_tristate(int signal)
-+{
-+	signal -= 200;
-+	gpio2->dir &= ~(0x01 << signal); 	/* Set GPIO to input */
-+}
-+#endif
-+
-+int au1xxx_gpio1_read(int signal)
-+{
-+/*	gpio1->trioutclr |= (0x01 << signal); */
-+	return ((gpio1->pinstaterd >> signal) & 0x01);
-+}
-+
-+void au1xxx_gpio1_write(int signal, int value)
-+{
-+	if(value)
-+		gpio1->outputset = (0x01 << signal);
-+	else
-+		gpio1->outputclr = (0x01 << signal);	/* Output a Zero */
-+}
-+
-+void au1xxx_gpio1_tristate(int signal)
-+{
-+	gpio1->trioutclr = (0x01 << signal);		/* Tristate signal */
-+}
-+
-+
-+int au1xxx_gpio_read(int signal)
-+{
-+	if(signal >= 200)
-+#if defined(CONFIG_SOC_AU1000)
-+		return 0;
-+#else
-+		return au1xxx_gpio2_read(signal);
-+#endif
-+	else
-+		return au1xxx_gpio1_read(signal);
-+}
-+
-+void au1xxx_gpio_write(int signal, int value)
-+{
-+	if(signal >= 200)
-+#if defined(CONFIG_SOC_AU1000)
-+		;
-+#else
-+		au1xxx_gpio2_write(signal, value);
-+#endif
-+	else
-+		au1xxx_gpio1_write(signal, value);
-+}
-+
-+void au1xxx_gpio_tristate(int signal)
-+{
-+	if(signal >= 200)
-+#if defined(CONFIG_SOC_AU1000)
-+		;
-+#else
-+		au1xxx_gpio2_tristate(signal);
-+#endif
-+	else
-+		au1xxx_gpio1_tristate(signal);
-+}
-+
-+void au1xxx_gpio1_set_inputs(void)
-+{
-+	gpio1->pininputen = 0;
-+}
-+
-+EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
-+EXPORT_SYMBOL(au1xxx_gpio_tristate);
-+EXPORT_SYMBOL(au1xxx_gpio_write);
-+EXPORT_SYMBOL(au1xxx_gpio_read);
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/irq.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/irq.c
---- linux-2.4.32-rc1/arch/mips/au1000/common/irq.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/irq.c	2005-03-13 08:56:57.000000000 +0100
-@@ -303,8 +303,30 @@
- };
- 
- #ifdef CONFIG_PM
--void startup_match20_interrupt(void)
-+void startup_match20_interrupt(void (*handler)(int, void *, struct pt_regs *))
- {
-+	static struct irqaction action;
-+	/* This is a big problem.... since we didn't use request_irq
-+	   when kernel/irq.c calls probe_irq_xxx this interrupt will
-+	   be probed for usage. This will end up disabling the device :(
-+
-+       Give it a bogus "action" pointer -- this will keep it from
-+	   getting auto-probed!
-+
-+       By setting the status to match that of request_irq() we
-+       can avoid it.  --cgray
-+	*/
-+	action.dev_id = handler;
-+	action.flags = 0;
-+	action.mask = 0;
-+	action.name = "Au1xxx TOY";
-+	action.handler = handler;
-+	action.next = NULL;
-+
-+	irq_desc[AU1000_TOY_MATCH2_INT].action = &action; 
-+	irq_desc[AU1000_TOY_MATCH2_INT].status 
-+		 &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
-+
- 	local_enable_irq(AU1000_TOY_MATCH2_INT);
- }
- #endif
-@@ -508,6 +530,7 @@
- 
- 	if (!intc0_req0) return;
- 
-+#ifdef AU1000_USB_DEV_REQ_INT
- 	/*
- 	 * Because of the tight timing of SETUP token to reply
- 	 * transactions, the USB devices-side packet complete
-@@ -518,6 +541,7 @@
- 		do_IRQ(AU1000_USB_DEV_REQ_INT, regs);
- 		return;
- 	}
-+#endif
- 
- 	irq = au_ffs(intc0_req0) - 1;
- 	intc0_req0 &= ~(1<<irq);
-@@ -536,17 +560,7 @@
- 
- 	irq = au_ffs(intc0_req1) - 1;
- 	intc0_req1 &= ~(1<<irq);
--#ifdef CONFIG_PM
--	if (irq == AU1000_TOY_MATCH2_INT) {
--		mask_and_ack_rise_edge_irq(irq);
--		counter0_irq(irq, NULL, regs);
--		local_enable_irq(irq);
--	}
--	else
--#endif
--	{
--		do_IRQ(irq, regs);
--	}
-+	do_IRQ(irq, regs);
- }
- 
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/Makefile linux-2.4.32-rc1.mips/arch/mips/au1000/common/Makefile
---- linux-2.4.32-rc1/arch/mips/au1000/common/Makefile	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/Makefile	2005-01-30 09:01:27.000000000 +0100
-@@ -19,9 +19,9 @@
- export-objs		= prom.o clocks.o power.o usbdev.o
- 
- obj-y := prom.o int-handler.o irq.o puts.o time.o reset.o cputable.o \
--	au1xxx_irqmap.o clocks.o power.o setup.o sleeper.o dma.o dbdma.o
-+	au1xxx_irqmap.o clocks.o power.o setup.o sleeper.o dma.o dbdma.o gpio.o
-   
--export-objs += dma.o dbdma.o
-+export-objs += dma.o dbdma.o gpio.o
- 
- obj-$(CONFIG_AU1X00_USB_DEVICE) += usbdev.o
- obj-$(CONFIG_KGDB) += dbg_io.o
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/pci_fixup.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/pci_fixup.c
---- linux-2.4.32-rc1/arch/mips/au1000/common/pci_fixup.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/pci_fixup.c	2004-12-03 09:00:32.000000000 +0100
-@@ -75,9 +75,13 @@
- 
- #ifdef CONFIG_NONCOHERENT_IO
- 	/* 
--	 *  Set the NC bit in controller for pre-AC silicon
-+         *  Set the NC bit in controller for Au1500 pre-AC silicon
- 	 */
--	au_writel( 1<<16 | au_readl(Au1500_PCI_CFG), Au1500_PCI_CFG);
-+	u32 prid = read_c0_prid();
-+	if ( (prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
-+	       au_writel( 1<<16 | au_readl(Au1500_PCI_CFG), Au1500_PCI_CFG);
-+	       printk("Non-coherent PCI accesses enabled\n");
-+	}
- 	printk("Non-coherent PCI accesses enabled\n");
- #endif
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/pci_ops.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/pci_ops.c
---- linux-2.4.32-rc1/arch/mips/au1000/common/pci_ops.c	2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/pci_ops.c	2005-02-27 23:14:24.000000000 +0100
-@@ -162,6 +162,7 @@
- static int config_access(unsigned char access_type, struct pci_dev *dev, 
- 			 unsigned char where, u32 * data)
- {
-+	int error = PCIBIOS_SUCCESSFUL;
- #if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
- 	unsigned char bus = dev->bus->number;
- 	unsigned int dev_fn = dev->devfn;
-@@ -170,7 +171,6 @@
- 	unsigned long offset, status;
- 	unsigned long cfg_base;
- 	unsigned long flags;
--	int error = PCIBIOS_SUCCESSFUL;
- 	unsigned long entryLo0, entryLo1;
- 
- 	if (device > 19) {
-@@ -205,9 +205,8 @@
- 		last_entryLo0  = last_entryLo1 = 0xffffffff;
- 	}
- 
--	/* Since the Au1xxx doesn't do the idsel timing exactly to spec,
--	 * many board vendors implement their own off-chip idsel, so call
--	 * it now.  If it doesn't succeed, may as well bail out at this point.
-+	/* Allow board vendors to implement their own off-chip idsel.  
-+	 * If it doesn't succeed, may as well bail out at this point.
- 	 */
- 	if (board_pci_idsel) {
- 		if (board_pci_idsel(device, 1) == 0) {
-@@ -271,8 +270,11 @@
- 	}
- 
- 	local_irq_restore(flags);
--	return error;
-+#else
-+	/* Fake out Config space access with no responder */
-+	*data = 0xFFFFFFFF;
- #endif
-+	return error;
- }
- #endif
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/power.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/power.c
---- linux-2.4.32-rc1/arch/mips/au1000/common/power.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/power.c	2005-04-07 02:37:19.000000000 +0200
-@@ -50,7 +50,6 @@
- 
- static void calibrate_delay(void);
- 
--extern void set_au1x00_speed(unsigned int new_freq);
- extern unsigned int get_au1x00_speed(void);
- extern unsigned long get_au1x00_uart_baud_base(void);
- extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
-@@ -116,6 +115,7 @@
- 	sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
- 	sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
- 
-+#ifndef CONFIG_SOC_AU1200
- 	/* Shutdown USB host/device.
- 	*/
- 	sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
-@@ -127,6 +127,7 @@
- 
- 	sleep_usbdev_enable = au_readl(USBD_ENABLE);
- 	au_writel(0, USBD_ENABLE); au_sync();
-+#endif
- 
- 	/* Save interrupt controller state.
- 	*/
-@@ -212,14 +213,12 @@
- int au_sleep(void)
- {
- 	unsigned long wakeup, flags;
--	extern	void	save_and_sleep(void);
-+	extern unsigned int save_and_sleep(void);
- 
- 	spin_lock_irqsave(&pm_lock,flags);
- 
- 	save_core_regs();
- 
--	flush_cache_all();
--
- 	/** The code below is all system dependent and we should probably
- 	 ** have a function call out of here to set this up.  You need
- 	 ** to configure the GPIO or timer interrupts that will bring
-@@ -227,27 +226,26 @@
- 	 ** For testing, the TOY counter wakeup is useful.
- 	 **/
- 
--#if 0
-+#if 1
- 	au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
- 
- 	/* gpio 6 can cause a wake up event */
- 	wakeup = au_readl(SYS_WAKEMSK);
- 	wakeup &= ~(1 << 8);	/* turn off match20 wakeup */
--	wakeup |= 1 << 6;	/* turn on gpio 6 wakeup   */
-+	wakeup = 1 << 5;	/* turn on gpio 6 wakeup   */
- #else
--	/* For testing, allow match20 to wake us up.
--	*/
-+	/* For testing, allow match20 to wake us up.  */
- #ifdef SLEEP_TEST_TIMEOUT
- 	wakeup_counter0_set(sleep_ticks);
- #endif
- 	wakeup = 1 << 8;	/* turn on match20 wakeup   */
- 	wakeup = 0;
- #endif
--	au_writel(1, SYS_WAKESRC);	/* clear cause */
-+	au_writel(0, SYS_WAKESRC);	/* clear cause */
- 	au_sync();
- 	au_writel(wakeup, SYS_WAKEMSK);
- 	au_sync();
--
-+	DPRINTK("Entering sleep!\n");
- 	save_and_sleep();
- 
- 	/* after a wakeup, the cpu vectors back to 0x1fc00000 so
-@@ -255,6 +253,7 @@
- 	 */
- 	restore_core_regs();
- 	spin_unlock_irqrestore(&pm_lock, flags);
-+	DPRINTK("Leaving sleep!\n");
- 	return 0;
- }
- 
-@@ -285,7 +284,6 @@
- 
- 		if (retval)
- 			return retval;
--
- 		au_sleep();
- 		retval = pm_send_all(PM_RESUME, (void *) 0);
- 	}
-@@ -296,7 +294,6 @@
- 			 void *buffer, size_t * len)
- {
- 	int retval = 0;
--	void	au1k_wait(void);
- 
- 	if (!write) {
- 		*len = 0;
-@@ -305,119 +302,9 @@
- 		if (retval)
- 			return retval;
- 		suspend_mode = 1;
--		au1k_wait();
--		retval = pm_send_all(PM_RESUME, (void *) 0);
--	}
--	return retval;
--}
- 
--
--static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
--		      void *buffer, size_t * len)
--{
--	int retval = 0, i;
--	unsigned long val, pll;
--#define TMPBUFLEN 64
--#define MAX_CPU_FREQ 396
--	char buf[TMPBUFLEN], *p;
--	unsigned long flags, intc0_mask, intc1_mask;
--	unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk,
--	    old_refresh;
--	unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;
--
--	spin_lock_irqsave(&pm_lock, flags);
--	if (!write) {
--		*len = 0;
--	} else {
--		/* Parse the new frequency */
--		if (*len > TMPBUFLEN - 1) {
--			spin_unlock_irqrestore(&pm_lock, flags);
--			return -EFAULT;
--		}
--		if (copy_from_user(buf, buffer, *len)) {
--			spin_unlock_irqrestore(&pm_lock, flags);
--			return -EFAULT;
--		}
--		buf[*len] = 0;
--		p = buf;
--		val = simple_strtoul(p, &p, 0);
--		if (val > MAX_CPU_FREQ) {
--			spin_unlock_irqrestore(&pm_lock, flags);
--			return -EFAULT;
--		}
--
--		pll = val / 12;
--		if ((pll > 33) || (pll < 7)) {	/* 396 MHz max, 84 MHz min */
--			/* revisit this for higher speed cpus */
--			spin_unlock_irqrestore(&pm_lock, flags);
--			return -EFAULT;
--		}
--
--		old_baud_base = get_au1x00_uart_baud_base();
--		old_cpu_freq = get_au1x00_speed();
--
--		new_cpu_freq = pll * 12 * 1000000;
--	        new_baud_base =  (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
--		set_au1x00_speed(new_cpu_freq);
--		set_au1x00_uart_baud_base(new_baud_base);
--
--		old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
--		new_refresh =
--		    ((old_refresh * new_cpu_freq) /
--		     old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
--
--		au_writel(pll, SYS_CPUPLL);
--		au_sync_delay(1);
--		au_writel(new_refresh, MEM_SDREFCFG);
--		au_sync_delay(1);
--
--		for (i = 0; i < 4; i++) {
--			if (au_readl
--			    (UART_BASE + UART_MOD_CNTRL +
--			     i * 0x00100000) == 3) {
--				old_clk =
--				    au_readl(UART_BASE + UART_CLK +
--					  i * 0x00100000);
--				// baud_rate = baud_base/clk
--				baud_rate = old_baud_base / old_clk;
--				/* we won't get an exact baud rate and the error
--				 * could be significant enough that our new
--				 * calculation will result in a clock that will
--				 * give us a baud rate that's too far off from
--				 * what we really want.
--				 */
--				if (baud_rate > 100000)
--					baud_rate = 115200;
--				else if (baud_rate > 50000)
--					baud_rate = 57600;
--				else if (baud_rate > 30000)
--					baud_rate = 38400;
--				else if (baud_rate > 17000)
--					baud_rate = 19200;
--				else
--					(baud_rate = 9600);
--				// new_clk = new_baud_base/baud_rate
--				new_clk = new_baud_base / baud_rate;
--				au_writel(new_clk,
--				       UART_BASE + UART_CLK +
--				       i * 0x00100000);
--				au_sync_delay(10);
--			}
--		}
-+		retval = pm_send_all(PM_RESUME, (void *) 0);
- 	}
--
--
--	/* We don't want _any_ interrupts other than
--	 * match20. Otherwise our calibrate_delay()
--	 * calculation will be off, potentially a lot.
--	 */
--	intc0_mask = save_local_and_disable(0);
--	intc1_mask = save_local_and_disable(1);
--	local_enable_irq(AU1000_TOY_MATCH2_INT);
--	spin_unlock_irqrestore(&pm_lock, flags);
--	calibrate_delay();
--	restore_local_and_enable(0, intc0_mask);
--	restore_local_and_enable(1, intc1_mask);
- 	return retval;
- }
- 
-@@ -425,7 +312,6 @@
- static struct ctl_table pm_table[] = {
- 	{ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, &pm_do_suspend},
- 	{ACPI_SLEEP, "sleep", NULL, 0, 0600, NULL, &pm_do_sleep},
--	{CTL_ACPI, "freq", NULL, 0, 0600, NULL, &pm_do_freq},
- 	{0}
- };
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/reset.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/reset.c
---- linux-2.4.32-rc1/arch/mips/au1000/common/reset.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/reset.c	2005-03-19 08:17:51.000000000 +0100
-@@ -37,8 +37,6 @@
- #include <asm/system.h>
- #include <asm/au1000.h>
- 
--extern int au_sleep(void);
--
- void au1000_restart(char *command)
- {
- 	/* Set all integrated peripherals to disabled states */
-@@ -144,6 +142,26 @@
- 		au_writel(0x00, 0xb1900064); /* sys_auxpll */
- 		au_writel(0x00, 0xb1900100); /* sys_pininputen */
- 		break;
-+	case 0x04000000: /* Au1200 */
-+		au_writel(0x00, 0xb400300c); /* ddma */
-+		au_writel(0x00, 0xb1a00004); /* psc 0 */
-+		au_writel(0x00, 0xb1b00004); /* psc 1 */
-+		au_writel(0x00d02000, 0xb4020004); /* ehci, ohci, udc, otg */
-+		au_writel(0x00, 0xb5000004); /* lcd */
-+		au_writel(0x00, 0xb060000c); /* sd0 */
-+		au_writel(0x00, 0xb068000c); /* sd1 */
-+		au_writel(0x00, 0xb1100100); /* swcnt */
-+		au_writel(0x00, 0xb0300000); /* aes */
-+		au_writel(0x00, 0xb4004000); /* cim */
-+		au_writel(0x00, 0xb1100100); /* uart0_enable */
-+		au_writel(0x00, 0xb1200100); /* uart1_enable */
-+		au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-+		au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-+		au_writel(0x00, 0xb1900028); /* sys_clksrc */
-+		au_writel(0x10, 0xb1900060); /* sys_cpupll */
-+		au_writel(0x00, 0xb1900064); /* sys_auxpll */
-+		au_writel(0x00, 0xb1900100); /* sys_pininputen */
-+		break;
- 
- 	default:
- 		break;
-@@ -163,32 +181,23 @@
- 
- void au1000_halt(void)
- {
--#if defined(CONFIG_MIPS_PB1550)
--	/* power off system */
--	printk("\n** Powering off Pb1550\n");
--	au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C); 
--	au_sync();
--	while(1); /* should not get here */
--#endif
--	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
--#ifdef CONFIG_MIPS_MIRAGE
--	au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
--#endif
--#ifdef CONFIG_PM
--	au_sleep();
--
--	/* should not get here */
--	printk(KERN_ERR "Unable to put cpu in sleep mode\n");
--	while(1);
--#else
--	while (1)
-+	/* Use WAIT in a low-power infinite spin loop */
-+	while (1) {
- 		__asm__(".set\tmips3\n\t"
- 	                "wait\n\t"
- 			".set\tmips0");
--#endif
-+	}
- }
- 
- void au1000_power_off(void)
- {
-+	extern void board_power_off (void);
-+
-+	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-+
-+	/* Give board a chance to power-off */
-+	board_power_off();
-+
-+	/* If board can't power-off, spin forever */
- 	au1000_halt();
- }
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/setup.c
---- linux-2.4.32-rc1/arch/mips/au1000/common/setup.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/setup.c	2005-01-30 09:01:27.000000000 +0100
-@@ -174,6 +174,40 @@
- 	initrd_end = (unsigned long)&__rd_end;
- #endif
- 
-+#if defined(CONFIG_SOC_AU1200)
-+#ifdef CONFIG_USB_EHCI_HCD
-+	if ((argptr = strstr(argptr, "usb_ehci=")) == NULL) {
-+	        char usb_args[80];
-+		argptr = prom_getcmdline();
-+		memset(usb_args, 0, sizeof(usb_args));
-+		sprintf(usb_args, " usb_ehci=base:0x%x,len:0x%x,irq:%d",
-+			USB_EHCI_BASE, USB_EHCI_LEN, AU1000_USB_HOST_INT);
-+		strcat(argptr, usb_args);
-+	}
-+#ifdef CONFIG_USB_AMD5536UDC
-+	/* enable EHC + OHC + UDC clocks, memory and bus mastering */
-+/*	au_writel( 0x00DF207F, USB_MSR_BASE + 4); */
-+	au_writel( 0xC0DF207F, USB_MSR_BASE + 4);  // incl. prefetch
-+#else
-+	/* enable EHC + OHC clocks, memory and bus mastering */
-+/*	au_writel( 0x00DB200F, USB_MSR_BASE + 4); */
-+	au_writel( 0xC0DB200F, USB_MSR_BASE + 4);  /* incl. prefetch */
-+#endif
-+	udelay(1000);
-+
-+#else /* CONFIG_USB_EHCI_HCD */
-+
-+#ifdef CONFIG_USB_AMD5536UDC
-+#ifndef CONFIG_USB_OHCI
-+	/* enable UDC clocks, memory and bus mastering */
-+/*	au_writel( 0x00DC2070, USB_MSR_BASE + 4); */
-+	au_writel( 0xC0DC2070, USB_MSR_BASE + 4);  // incl. prefetch
-+	udelay(1000);
-+#endif
-+#endif
-+#endif /* CONFIG_USB_EHCI_HCD */
-+#endif /* CONFIG_SOC_AU1200 */
-+
- #if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
- #ifdef CONFIG_USB_OHCI
- 	if ((argptr = strstr(argptr, "usb_ohci=")) == NULL) {
-@@ -187,19 +221,38 @@
- #endif
- 
- #ifdef CONFIG_USB_OHCI
--	// enable host controller and wait for reset done
-+#if defined(CONFIG_SOC_AU1200)
-+#ifndef CONFIG_USB_EHCI_HCD
-+#ifdef CONFIG_USB_AMD5536UDC
-+	/* enable OHC + UDC clocks, memory and bus mastering */
-+/*	au_writel( 0x00DD2073, USB_MSR_BASE + 4); */
-+	au_writel( 0xC0DD2073, USB_MSR_BASE + 4);  // incl. prefetch
-+#else
-+	/* enable OHC clocks, memory and bus mastering */
-+	au_writel( 0x00D12003, USB_MSR_BASE + 4);
-+#endif
-+	udelay(1000);
-+printk("DEBUG: Reading Au1200 USB2 reg 0x%x\n", au_readl(USB_MSR_BASE + 4));
-+#endif
-+#else
-+	/* Au1000, Au1500, Au1100, Au1550 */
-+	/* enable host controller and wait for reset done */
- 	au_writel(0x08, USB_HOST_CONFIG);
- 	udelay(1000);
- 	au_writel(0x0E, USB_HOST_CONFIG);
- 	udelay(1000);
--	au_readl(USB_HOST_CONFIG); // throw away first read
-+	au_readl(USB_HOST_CONFIG); /* throw away first read */
- 	while (!(au_readl(USB_HOST_CONFIG) & 0x10))
- 		au_readl(USB_HOST_CONFIG);
-+#endif /* CONFIG_SOC_AU1200 */
- #endif
--#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
-+#else
-+
-+#endif /* defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) */
-+
- 
- #ifdef CONFIG_FB
--	// Needed if PCI video card in use
-+	/* Needed if PCI video card in use */
- 	conswitchp = &dummy_con;
- #endif
- 
-@@ -209,8 +262,7 @@
- #endif
- 
- #ifdef CONFIG_BLK_DEV_IDE
--	/* Board setup takes precedence for unique devices.
--	*/
-+	/* Board setup takes precedence for unique devices.  */
- 	if ((ide_ops == NULL) || (ide_ops == &no_ide_ops))
- 		ide_ops = &std_ide_ops;
- #endif
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/sleeper.S linux-2.4.32-rc1.mips/arch/mips/au1000/common/sleeper.S
---- linux-2.4.32-rc1/arch/mips/au1000/common/sleeper.S	2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/sleeper.S	2005-01-30 09:01:27.000000000 +0100
-@@ -15,17 +15,48 @@
- #include <asm/addrspace.h>
- #include <asm/regdef.h>
- #include <asm/stackframe.h>
-+#include <asm/au1000.h>
-+
-+/*
-+ * Note: This file is *not* conditional on CONFIG_PM since Alchemy sleep 
-+ * need not be tied to any particular power management scheme.
-+ */
-+
-+	.extern ___flush_cache_all
- 
- 	.text
--	.set	macro
--	.set	noat
- 	.align	5
- 
--/* Save all of the processor general registers and go to sleep.
-- * A wakeup condition will get us back here to restore the registers.
-+/*
-+ * Save the processor general registers and go to sleep. A wakeup
-+ * condition will get us back here to restore the registers.
-  */
--LEAF(save_and_sleep)
- 
-+/* still need to fix alignment issues here */
-+save_and_sleep_frmsz = 48
-+NESTED(save_and_sleep, save_and_sleep_frmsz, ra)
-+	.set noreorder
-+	.set nomacro
-+	.set noat
-+	subu sp, save_and_sleep_frmsz
-+	sw ra, save_and_sleep_frmsz-4(sp)
-+	sw s0, save_and_sleep_frmsz-8(sp)
-+	sw s1, save_and_sleep_frmsz-12(sp)
-+	sw s2, save_and_sleep_frmsz-16(sp)
-+	sw s3, save_and_sleep_frmsz-20(sp)
-+	sw s4, save_and_sleep_frmsz-24(sp)
-+	sw s5, save_and_sleep_frmsz-28(sp)
-+	sw s6, save_and_sleep_frmsz-32(sp)
-+	sw s7, save_and_sleep_frmsz-36(sp)
-+	sw s8, save_and_sleep_frmsz-40(sp)
-+	sw gp, save_and_sleep_frmsz-44(sp)
-+
-+	/* We only need to save the registers that the calling function 
-+	 * hasn't saved for us.  0 is always zero.  8 - 15, 24 and 25 are 
-+	 * temporaries and can be used without saving. 26 and 27 are reserved 
-+	 * for interrupt/trap handling and expected to change.  29 is the 
-+	 * stack pointer which is handled as a special case here.
-+	 */
- 	subu	sp, PT_SIZE
- 	sw	$1, PT_R1(sp)
- 	sw	$2, PT_R2(sp)
-@@ -34,14 +65,6 @@
- 	sw	$5, PT_R5(sp)
- 	sw	$6, PT_R6(sp)
- 	sw	$7, PT_R7(sp)
--	sw	$8, PT_R8(sp)
--	sw	$9, PT_R9(sp)
--	sw	$10, PT_R10(sp)
--	sw	$11, PT_R11(sp)
--	sw	$12, PT_R12(sp)
--	sw	$13, PT_R13(sp)
--	sw	$14, PT_R14(sp)
--	sw	$15, PT_R15(sp)
- 	sw	$16, PT_R16(sp)
- 	sw	$17, PT_R17(sp)
- 	sw	$18, PT_R18(sp)
-@@ -50,32 +73,47 @@
- 	sw	$21, PT_R21(sp)
- 	sw	$22, PT_R22(sp)
- 	sw	$23, PT_R23(sp)
--	sw	$24, PT_R24(sp)
--	sw	$25, PT_R25(sp)
--	sw	$26, PT_R26(sp)
--	sw	$27, PT_R27(sp)
- 	sw	$28, PT_R28(sp)
--	sw	$29, PT_R29(sp)
- 	sw	$30, PT_R30(sp)
- 	sw	$31, PT_R31(sp)
-+#define PT_C0STATUS PT_LO
-+#define PT_CONTEXT PT_HI
-+#define PT_PAGEMASK PT_EPC
-+#define PT_CONFIG PT_BVADDR
- 	mfc0	k0, CP0_STATUS
--	sw	k0, 0x20(sp)
-+	sw	k0, PT_C0STATUS(sp) // 0x20
- 	mfc0	k0, CP0_CONTEXT
--	sw	k0, 0x1c(sp)
-+	sw	k0, PT_CONTEXT(sp) // 0x1c
- 	mfc0	k0, CP0_PAGEMASK
--	sw	k0, 0x18(sp)
-+	sw	k0, PT_PAGEMASK(sp) // 0x18
- 	mfc0	k0, CP0_CONFIG
--	sw	k0, 0x14(sp)
-+	sw	k0, PT_CONFIG(sp) // 0x14
-+
-+	.set macro
-+	.set at
-+
-+	li t0, SYS_SLPPWR
-+	sw	zero, 0(t0)	/* Get the processor ready to sleep */
-+	sync
- 
- 	/* Now set up the scratch registers so the boot rom will
- 	 * return to this point upon wakeup.
-+	 * sys_scratch0 : SP
-+	 * sys_scratch1 : RA
-+	 */
-+	li	t0, SYS_SCRATCH0
-+	li	t1, SYS_SCRATCH1
-+	sw	sp, 0(t0)
-+	la	k0, resume_from_sleep
-+	sw	k0, 0(t1)
-+
-+/*
-+ * Flush DCACHE to make sure context is in memory
- 	 */
--	la	k0, 1f
--	lui	k1, 0xb190
--	ori	k1, 0x18
--	sw	sp, 0(k1)
--	ori 	k1, 0x1c
--	sw	k0, 0(k1)
-+	la 	t1,___flush_cache_all   /* _flush_cache_all is a function pointer */
-+	lw 	t0,0(t1)
-+	jal t0
-+	nop
- 
- /* Put SDRAM into self refresh.  Preload instructions into cache,
-  * issue a precharge, then auto refresh, then sleep commands to it.
-@@ -88,30 +126,65 @@
-  	cache	0x14, 96(t0)
- 	.set	mips0
- 
-+	/* Put SDRAM to sleep */
- sdsleep:
--	lui 	k0, 0xb400
--	sw	zero, 0x001c(k0)	/* Precharge */
--	sw	zero, 0x0020(k0)	/* Auto refresh */
--	sw	zero, 0x0030(k0)	/* SDRAM sleep */
-+	li 	a0, MEM_PHYS_ADDR
-+	or 	a0, a0, 0xA0000000
-+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500)
-+	lw 	k0, MEM_SDMODE0(a0)
-+	sw	zero, MEM_SDPRECMD(a0) 	/* Precharge */
-+	sw	zero, MEM_SDAUTOREF(a0)	/* Auto Refresh */
-+	sw	zero, MEM_SDSLEEP(a0)  	/* Sleep */
- 	sync
--
--	lui 	k1, 0xb190
--	sw	zero, 0x0078(k1)	/* get ready  to sleep */
-+#endif
-+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-+	sw	zero, MEM_SDPRECMD(a0) 	/* Precharge */
-+	sw 	zero, MEM_SDSREF(a0)
-+	
-+	#lw 	t0, MEM_SDSTAT(a0)
-+	#and t0, t0, 0x01000000
-+	li 	t0, 0x01000000
-+refresh_not_set:
-+	lw 	t1, MEM_SDSTAT(a0)
-+	and	t2, t1, t0
-+	beq	zero, t2, refresh_not_set
-+	nop
-+
-+	li	t0, ~0x30000000
-+	lw 	t1, MEM_SDCONFIGA(a0)
-+	and t1, t0, t1
-+	sw 	t1, MEM_SDCONFIGA(a0)
- 	sync
--	sw	zero, 0x007c(k1)	/* Put processor to sleep */
-+#endif
-+
-+	li	t0, SYS_SLEEP
-+	sw	zero, 0(t0)	/* Put processor to sleep */
- 	sync
-+	nop
-+	nop
-+	nop
-+	nop
-+	nop
-+	nop
-+	nop
-+	nop
-+
- 
- 	/* This is where we return upon wakeup.
- 	 * Reload all of the registers and return.
- 	 */
--1:	nop
--	lw	k0, 0x20(sp)
-+resume_from_sleep:
-+	nop
-+	.set nomacro
-+	.set noat
-+
-+	lw	k0, PT_C0STATUS(sp) // 0x20
- 	mtc0	k0, CP0_STATUS
--	lw	k0, 0x1c(sp)
-+	lw	k0, PT_CONTEXT(sp) // 0x1c
- 	mtc0	k0, CP0_CONTEXT
--	lw	k0, 0x18(sp)
-+	lw	k0, PT_PAGEMASK(sp) // 0x18
- 	mtc0	k0, CP0_PAGEMASK
--	lw	k0, 0x14(sp)
-+	lw	k0, PT_CONFIG(sp) // 0x14
- 	mtc0	k0, CP0_CONFIG
- 	lw	$1, PT_R1(sp)
- 	lw	$2, PT_R2(sp)
-@@ -120,14 +193,6 @@
- 	lw	$5, PT_R5(sp)
- 	lw	$6, PT_R6(sp)
- 	lw	$7, PT_R7(sp)
--	lw	$8, PT_R8(sp)
--	lw	$9, PT_R9(sp)
--	lw	$10, PT_R10(sp)
--	lw	$11, PT_R11(sp)
--	lw	$12, PT_R12(sp)
--	lw	$13, PT_R13(sp)
--	lw	$14, PT_R14(sp)
--	lw	$15, PT_R15(sp)
- 	lw	$16, PT_R16(sp)
- 	lw	$17, PT_R17(sp)
- 	lw	$18, PT_R18(sp)
-@@ -136,15 +201,36 @@
- 	lw	$21, PT_R21(sp)
- 	lw	$22, PT_R22(sp)
- 	lw	$23, PT_R23(sp)
--	lw	$24, PT_R24(sp)
--	lw	$25, PT_R25(sp)
--	lw	$26, PT_R26(sp)
--	lw	$27, PT_R27(sp)
- 	lw	$28, PT_R28(sp)
--	lw	$29, PT_R29(sp)
- 	lw	$30, PT_R30(sp)
- 	lw	$31, PT_R31(sp)
-+
-+	.set macro
-+	.set at
-+
-+	/* clear the wake source, but save it as the return value of the function */
-+	li	t0, SYS_WAKESRC
-+	lw v0, 0(t0)
-+	sw v0, PT_R2(sp)
-+	sw zero, 0(t0)
-+
- 	addiu	sp, PT_SIZE
- 
-+	lw gp, save_and_sleep_frmsz-44(sp)
-+	lw s8, save_and_sleep_frmsz-40(sp)
-+	lw s7, save_and_sleep_frmsz-36(sp)
-+	lw s6, save_and_sleep_frmsz-32(sp)
-+	lw s5, save_and_sleep_frmsz-28(sp)
-+	lw s4, save_and_sleep_frmsz-24(sp)
-+	lw s3, save_and_sleep_frmsz-20(sp)
-+	lw s2, save_and_sleep_frmsz-16(sp)
-+	lw s1, save_and_sleep_frmsz-12(sp)
-+	lw s0, save_and_sleep_frmsz-8(sp)
-+	lw ra, save_and_sleep_frmsz-4(sp)
-+
-+	addu sp, save_and_sleep_frmsz
- 	jr	ra
-+	nop
-+	.set reorder
- END(save_and_sleep)
-+
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/time.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/time.c
---- linux-2.4.32-rc1/arch/mips/au1000/common/time.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/time.c	2005-04-08 10:33:17.000000000 +0200
-@@ -50,7 +50,6 @@
- #include <linux/mc146818rtc.h>
- #include <linux/timex.h>
- 
--extern void startup_match20_interrupt(void);
- extern void do_softirq(void);
- extern volatile unsigned long wall_jiffies;
- unsigned long missed_heart_beats = 0;
-@@ -59,14 +58,14 @@
- static unsigned long r4k_cur;    /* What counter should be at next timer irq */
- extern rwlock_t xtime_lock;
- int	no_au1xxx_32khz;
--void	(*au1k_wait_ptr)(void);
-+extern int allow_au1k_wait; 	/* default off for CP0 Counter */
- 
- /* Cycle counter value at the previous timer interrupt.. */
- static unsigned int timerhi = 0, timerlo = 0;
- 
- #ifdef CONFIG_PM
- #define MATCH20_INC 328
--extern void startup_match20_interrupt(void);
-+extern void startup_match20_interrupt(void (*handler)(int, void *, struct pt_regs *));
- static unsigned long last_pc0, last_match20;
- #endif
- 
-@@ -385,7 +384,6 @@
- {
-         unsigned int est_freq;
- 	extern unsigned long (*do_gettimeoffset)(void);
--	extern void au1k_wait(void);
- 
- 	printk("calculating r4koff... ");
- 	r4k_offset = cal_r4koff();
-@@ -437,9 +435,6 @@
- 		au_writel(0, SYS_TOYWRITE);
- 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
- 
--		au_writel(au_readl(SYS_WAKEMSK) | (1<<8), SYS_WAKEMSK);
--		au_writel(~0, SYS_WAKESRC);
--		au_sync();
- 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
- 
- 		/* setup match20 to interrupt once every 10ms */
-@@ -447,13 +442,13 @@
- 		au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
- 		au_sync();
- 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
--		startup_match20_interrupt();
-+		startup_match20_interrupt(counter0_irq);
- 
- 		do_gettimeoffset = do_fast_pm_gettimeoffset;
- 
- 		/* We can use the real 'wait' instruction.
- 		*/
--		au1k_wait_ptr = au1k_wait;
-+		allow_au1k_wait = 1;
- 	}
- 
- #else
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/db1x00/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/board_setup.c
---- linux-2.4.32-rc1/arch/mips/au1000/db1x00/board_setup.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/board_setup.c	2005-03-19 08:17:51.000000000 +0100
-@@ -46,10 +46,22 @@
- #include <asm/au1000.h>
- #include <asm/db1x00.h>
- 
--extern struct rtc_ops no_rtc_ops;
-+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) && defined(CONFIG_MIPS_DB1550)
-+#include <asm/au1xxx_dbdma.h>
-+extern struct ide_ops *ide_ops;
-+extern struct ide_ops au1xxx_ide_ops;
-+extern u32 au1xxx_ide_virtbase;
-+extern u64 au1xxx_ide_physbase;
-+extern int au1xxx_ide_irq;
-+
-+/* Ddma */
-+chan_tab_t *ide_read_ch, *ide_write_ch;
-+u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma
-+
-+dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 };
-+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */
- 
--/* not correct for db1550 */
--static BCSR * const bcsr = (BCSR *)0xAE000000;
-+extern struct rtc_ops no_rtc_ops;
- 
- void board_reset (void)
- {
-@@ -57,6 +69,13 @@
- 	au_writel(0x00000000, 0xAE00001C);
- }
- 
-+void board_power_off (void)
-+{
-+#ifdef CONFIG_MIPS_MIRAGE
-+	au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
-+#endif
-+}
-+
- void __init board_setup(void)
- {
- 	u32 pin_func;
-@@ -108,8 +127,42 @@
- 	au_writel(0x02000200, GPIO2_OUTPUT);
- #endif
- 
-+#if defined(CONFIG_AU1XXX_SMC91111)
-+#define CPLD_CONTROL (0xAF00000C)
-+	{
-+	extern uint32_t au1xxx_smc91111_base;
-+	extern unsigned int au1xxx_smc91111_irq;
-+	extern int au1xxx_smc91111_nowait;
-+
-+	au1xxx_smc91111_base = 0xAC000300;
-+	au1xxx_smc91111_irq = AU1000_GPIO_8;
-+	au1xxx_smc91111_nowait = 1;
-+
-+	/* set up the Static Bus timing - only 396Mhz */
-+	bcsr->resets |= 0x7;
-+	au_writel(0x00010003, MEM_STCFG0);
-+	au_writel(0x000c00c0, MEM_STCFG2);
-+	au_writel(0x85E1900D, MEM_STTIME2);
-+	}
-+#endif /* end CONFIG_SMC91111 */
- 	au_sync();
- 
-+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) && defined(CONFIG_MIPS_DB1550)
-+	/*
-+	 * Iniz IDE parameters
-+	 */
-+	ide_ops = &au1xxx_ide_ops;
-+	au1xxx_ide_irq = DAUGHTER_CARD_IRQ;
-+	au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR;
-+	au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR);
-+
-+	/*
-+	 * change PIO or PIO+Ddma
-+	 * check the GPIO-6 pin condition. db1550:s6_dot
-+	 */
-+	switch4ddma = (au_readl(SYS_PINSTATERD) & (1 << 6)) ? 1 : 0;
-+#endif
-+
- #ifdef CONFIG_MIPS_DB1000
-     printk("AMD Alchemy Au1000/Db1000 Board\n");
- #endif
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/db1x00/irqmap.c linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/irqmap.c
---- linux-2.4.32-rc1/arch/mips/au1000/db1x00/irqmap.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/irqmap.c	2005-01-30 09:06:19.000000000 +0100
-@@ -53,6 +53,7 @@
- #ifdef CONFIG_MIPS_DB1550
- 	{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 IRQ#
- 	{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 IRQ#
-+	{ AU1000_GPIO_8, INTC_INT_LOW_LEVEL, 0 }, // Daughtercard IRQ#
- #else
- 	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 Fully_Interted#
- 	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 STSCHG#
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/db1x00/Makefile linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/Makefile
---- linux-2.4.32-rc1/arch/mips/au1000/db1x00/Makefile	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/Makefile	2005-01-30 09:06:19.000000000 +0100
-@@ -17,4 +17,11 @@
- obj-y := init.o board_setup.o irqmap.o
- obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o
- 
-+ifdef CONFIG_MIPS_DB1100
-+ifdef CONFIG_MMC
-+obj-y += mmc_support.o
-+export-objs += mmc_support.o
-+endif
-+endif
-+
- include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/db1x00/mmc_support.c linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/mmc_support.c
---- linux-2.4.32-rc1/arch/mips/au1000/db1x00/mmc_support.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/mmc_support.c	2005-01-30 09:07:01.000000000 +0100
-@@ -0,0 +1,126 @@
-+/*
-+ * BRIEF MODULE DESCRIPTION
-+ *
-+ *	MMC support routines for DB1100.
-+ *
-+ *
-+ * Copyright (c) 2003-2004 Embedded Edge, LLC.
-+ * Author: Embedded Edge, LLC.
-+ * Contact: dan@embeddededge.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <asm/irq.h>
-+#include <asm/au1000.h>
-+#include <asm/au1100_mmc.h>
-+#include <asm/db1x00.h>
-+
-+
-+/* SD/MMC controller support functions */
-+
-+/*
-+ * Detect card.
-+ */
-+void mmc_card_inserted(int _n_, int *_res_)
-+{
-+	u32 gpios = au_readl(SYS_PINSTATERD);
-+	u32 emptybit = (_n_) ? (1<<20) : (1<<19);
-+	*_res_ = ((gpios & emptybit) == 0);
-+}
-+
-+/*
-+ * Check card write protection.
-+ */
-+void mmc_card_writable(int _n_, int *_res_)
-+{
-+	BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+	unsigned long mmc_wp, board_specific;
-+
-+	if (_n_) {
-+		mmc_wp = BCSR_BOARD_SD1_WP;
-+	} else {
-+		mmc_wp = BCSR_BOARD_SD0_WP;
-+	}
-+
-+	board_specific = au_readl((unsigned long)(&bcsr->specific));
-+
-+	if (!(board_specific & mmc_wp)) {/* low means card writable */
-+		*_res_ = 1;
-+	} else {
-+		*_res_ = 0;
-+	}
-+}
-+
-+/*
-+ * Apply power to card slot.
-+ */
-+void mmc_power_on(int _n_)
-+{
-+	BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+	unsigned long mmc_pwr, board_specific;
-+
-+	if (_n_) {
-+		mmc_pwr = BCSR_BOARD_SD1_PWR;
-+	} else {
-+		mmc_pwr = BCSR_BOARD_SD0_PWR;
-+	}
-+
-+	board_specific = au_readl((unsigned long)(&bcsr->specific));
-+	board_specific |= mmc_pwr;
-+
-+	au_writel(board_specific, (int)(&bcsr->specific));
-+	au_sync_delay(1);
-+}
-+
-+/*
-+ * Remove power from card slot.
-+ */
-+void mmc_power_off(int _n_)
-+{
-+	BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+	unsigned long mmc_pwr, board_specific;
-+
-+	if (_n_) {
-+		mmc_pwr = BCSR_BOARD_SD1_PWR;
-+	} else {
-+		mmc_pwr = BCSR_BOARD_SD0_PWR;
-+	}
-+
-+	board_specific = au_readl((unsigned long)(&bcsr->specific));
-+	board_specific &= ~mmc_pwr;
-+
-+	au_writel(board_specific, (int)(&bcsr->specific));
-+	au_sync_delay(1);
-+}
-+
-+EXPORT_SYMBOL(mmc_card_inserted);
-+EXPORT_SYMBOL(mmc_card_writable);
-+EXPORT_SYMBOL(mmc_power_on);
-+EXPORT_SYMBOL(mmc_power_off);
-+
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/ficmmp/au1200_ibutton.c linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/au1200_ibutton.c
---- linux-2.4.32-rc1/arch/mips/au1000/ficmmp/au1200_ibutton.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/au1200_ibutton.c	2005-02-03 07:35:29.000000000 +0100
-@@ -0,0 +1,270 @@
-+/* ---------------------------------------------------------------------- 
-+ *  mtwilson_keys.c
-+ *
-+ *  Copyright (C) 2003 Intrinsyc Software Inc.
-+ *
-+ *  Intel Personal Media Player buttons
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  May 02, 2003 : Initial version [FB]
-+ *
-+ ------------------------------------------------------------------------*/
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/sched.h>
-+#include <linux/miscdevice.h>
-+#include <linux/errno.h>
-+#include <linux/poll.h>
-+#include <linux/delay.h>
-+#include <linux/input.h>
-+
-+#include <asm/au1000.h>
-+#include <asm/uaccess.h>
-+#include <asm/au1xxx_gpio.h>
-+#include <asm/irq.h>
-+#include <asm/keyboard.h>
-+#include <linux/time.h>
-+
-+#define DRIVER_VERSION	"V1.0"
-+#define DRIVER_AUTHOR	"FIC"
-+#define DRIVER_DESC		"FIC Travis Media Player Button Driver"
-+#define DRIVER_NAME		"Au1200Button"
-+
-+#define BUTTON_MAIN		(1<<1)
-+#define BUTTON_SELECT	(1<<6)
-+#define BUTTON_GUIDE	(1<<12)
-+#define BUTTON_DOWN		(1<<17)
-+#define BUTTON_LEFT		(1<<19)
-+#define BUTTON_RIGHT	(1<<26)
-+#define BUTTON_UP		(1<<28)
-+
-+#define BUTTON_MASK (\
-+    BUTTON_MAIN   \
-+    | BUTTON_SELECT	\
-+    | BUTTON_GUIDE	\
-+    | BUTTON_DOWN	\
-+    | BUTTON_LEFT	\
-+    | BUTTON_RIGHT	\
-+    | BUTTON_UP		\
-+    )
-+
-+#define BUTTON_INVERT (\
-+    BUTTON_MAIN   \
-+    | 0				\
-+    | BUTTON_GUIDE	\
-+    | 0				\
-+    | 0				\
-+    | 0				\
-+    | 0				\
-+    )
-+
-+char button_map[32]={0,KEY_S,0,0,0,0,KEY_ENTER,0,0,0,0,0,KEY_G,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0};
-+//char button_map[32]={0,0,0,0,0,0,KEY_ENTER,0,0,0,0,0,KEY_G,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0};
-+
-+//char button_map[32]={0,KEY_TAB,0,0,0,0,KEY_M,0,0,0,0,0,KEY_S,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0};
-+//char button_map[32]={0,0,0,0,0,0,KEY_M,0,0,0,0,0,KEY_S,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0};
-+
-+#define BUTTON_COUNT (sizeof (button_map) / sizeof (button_map[0]))
-+
-+struct input_dev dev;
-+struct timeval cur_tv;
-+
-+static unsigned int old_tv_usec = 0;
-+
-+static unsigned int read_button_state(void)
-+{
-+	unsigned int state;
-+
-+	state = au_readl(SYS_PINSTATERD) & BUTTON_MASK; /* get gpio status */
-+
-+	state ^= BUTTON_INVERT;		/* invert main & guide button */
-+
-+	/* printk("au1200_ibutton.c: button state [0x%X]\r\n",state); */
-+	return state;
-+}
-+
-+//This function returns 0 if the allowed microseconds have elapsed since the last call to ths function, otherwise it returns 1 to indicate a bounce condition
-+static unsigned int bounce() 
-+{
-+
-+	unsigned int elapsed_time;
-+
-+	do_gettimeofday (&cur_tv);    
-+
-+	if (!old_tv_usec) {
-+		old_tv_usec = cur_tv.tv_usec;
-+		return 0;
-+	}
-+
-+	if(cur_tv.tv_usec > old_tv_usec) {
-+		/* If there hasn't been rollover */
-+		elapsed_time =  ((cur_tv.tv_usec - old_tv_usec));
-+	}
-+	else {
-+		/* Accounting for rollover */
-+		elapsed_time =  ((1000000 - old_tv_usec + cur_tv.tv_usec));
-+	}
-+
-+	if (elapsed_time > 250000) {
-+		old_tv_usec = 0;	/* reset the bounce time */
-+		return 0;
-+	}
-+
-+	return 1;
-+}
-+
-+/* button interrupt handler */
-+static void button_interrupt(int irq, void *dev, struct pt_regs *regs)
-+{
-+
-+	unsigned int i,bit_mask, key_choice;
-+	u32 button_state;
-+	
-+	/* Report state to upper level */
-+	
-+	button_state = read_button_state() & BUTTON_MASK; /* get new gpio status */
-+
-+	/* Return if this is a repeated (bouncing) event */
-+	if(bounce())
-+		return;
-+
-+	/* we want to make keystrokes */
-+	for( i=0; i< BUTTON_COUNT; i++) {
-+		bit_mask = 1<<i;
-+		if (button_state & bit_mask) {
-+			key_choice = button_map[i];
-+			/* toggle key down */
-+			input_report_key(dev, key_choice, 1);
-+			/* toggle key up */
-+			input_report_key(dev, key_choice, 0);
-+			printk("ibutton gpio %d stat %x scan code %d\r\n", 
-+					i, button_state, key_choice);
-+			/* Only report the first key event; it doesn't make 
-+			 * sense for two keys to be pressed at the same time, 
-+			 * and causes problems with the directional keys 
-+			 * return;	
-+			 */
-+		}
-+	}
-+}
-+
-+static int 
-+button_translate(unsigned char scancode, unsigned char *keycode, char raw_mode) 
-+{
-+	static int prev_scancode;
-+	
-+	printk( "ibutton.c: translate: scancode=%x raw_mode=%x\n", 
-+			scancode, raw_mode);
-+
-+	if (scancode == 0xe0 || scancode == 0xe1) {
-+		prev_scancode = scancode;
-+		return 0;
-+	}
-+
-+	if (scancode == 0x00 || scancode == 0xff) {
-+		prev_scancode = 0;
-+		return 0;
-+	}
-+
-+	*keycode = scancode;
-+
-+	return 1;
-+}
-+
-+/* init button hardware */
-+static int button_hw_init(void)
-+{
-+	unsigned int	ipinfunc=0;	
-+
-+	printk("au1200_ibutton.c: Initializing buttons hardware\n");
-+
-+	// initialize GPIO pin function assignments	
-+
-+	ipinfunc = au_readl(SYS_PINFUNC);
-+
-+	ipinfunc &= ~(SYS_PINFUNC_DMA | SYS_PINFUNC_S0A | SYS_PINFUNC_S0B);	
-+	au_writel( ipinfunc ,SYS_PINFUNC);
-+	
-+	ipinfunc |=  (SYS_PINFUNC_S0C);
-+	au_writel( ipinfunc ,SYS_PINFUNC);
-+	
-+	return 0;
-+}
-+
-+/* button driver init */
-+static int __init button_init(void)
-+{
-+	int ret, i;
-+	unsigned int flag=0;
-+
-+	printk("au1200_ibutton.c: button_init()\r\n");
-+	
-+	button_hw_init();
-+	
-+	/* register all button irq handler */
-+	
-+	for(i=0; i< sizeof(button_map)/sizeof(button_map[0]); i++)
-+	{
-+		/* register irq <-- gpio 1 ,6 ,12 , 17 ,19 , 26 ,28 */
-+		if(button_map[i] != 0)	
-+		{
-+			ret = request_irq(AU1000_GPIO_0 + i , 
-+					&button_interrupt , SA_INTERRUPT , 
-+					DRIVER_NAME , &dev);
-+			if(ret) flag |= 1<<i;
-+		}
-+	}
-+
-+	printk("au1200_ibutton.c: request_irq,ret:0x%x\r\n",ret);
-+	
-+	if (ret) {
-+		printk("au1200_ibutton.c: request_irq:%X failed\r\n",flag);
-+		return ret;
-+	}
-+		
-+	dev.name = DRIVER_NAME;
-+	dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
-+
-+	for (i=0;i<sizeof(button_map)/sizeof(button_map[0]);i++)
-+	{
-+		dev.keybit[LONG(button_map[i])] |= BIT(button_map[i]);
-+	}
-+	
-+	input_register_device(&dev);
-+
-+	/* ready to receive interrupts */
-+
-+	return 0;
-+}
-+
-+/* button driver exit */
-+static void __exit button_exit(void)
-+{
-+	int i;
-+	
-+	for(i=0;i<sizeof(button_map)/sizeof(button_map[0]);i++)
-+	{
-+		if(button_map[i] != 0)
-+		{
-+			free_irq( AU1000_GPIO_0 + i, &dev);
-+		}
-+	}
-+	
-+	input_unregister_device(&dev);
-+	
-+	printk("au1200_ibutton.c: button_exit()\r\n");
-+}
-+
-+module_init(button_init);
-+module_exit(button_exit);
-+
-+MODULE_AUTHOR( DRIVER_AUTHOR );
-+MODULE_DESCRIPTION( DRIVER_DESC );
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/ficmmp/au1xxx_dock.c linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/au1xxx_dock.c
---- linux-2.4.32-rc1/arch/mips/au1000/ficmmp/au1xxx_dock.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/au1xxx_dock.c	2005-01-30 09:01:27.000000000 +0100
-@@ -0,0 +1,261 @@
-+/*
-+ *  Copyright (C) 2003 Metrowerks, All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/sched.h>
-+#include <linux/miscdevice.h>
-+#include <linux/errno.h>
-+#include <linux/poll.h>
-+#include <asm/au1000.h>
-+#include <asm/uaccess.h>
-+#include <asm/au1xxx_gpio.h>
-+
-+
-+#if defined(CONFIG_MIPS_FICMMP)
-+	#define DOCK_GPIO	215
-+#else
-+	#error Unsupported Au1xxx Platform
-+#endif
-+
-+#define MAKE_FLAG 0x20
-+
-+#undef DEBUG
-+
-+#define DEBUG 0
-+//#define DEBUG 1
-+
-+#if DEBUG
-+#define DPRINTK(format, args...) printk(__FUNCTION__ ": "  format, ## args)
-+#else
-+#define DPRINTK(format, args...) do { } while (0)
-+#endif
-+
-+/* Please note that this driver is based on a timer and is not interrupt
-+ * driven.  If you are going to make use of this driver, you will need to have
-+ * your application open the dock listing from the /dev directory first.
-+ */
-+
-+struct au1xxx_dock {
-+	struct fasync_struct *fasync;
-+	wait_queue_head_t     read_wait;
-+	int open_count;
-+	unsigned int debounce;
-+	unsigned int current;
-+	unsigned int last;
-+};
-+
-+static struct au1xxx_dock dock_info;
-+
-+
-+static void dock_timer_periodic(void *data);
-+
-+static struct tq_struct dock_task = {
-+	routine:	dock_timer_periodic,
-+	data:		NULL
-+};
-+
-+static int cleanup_flag = 0;
-+static DECLARE_WAIT_QUEUE_HEAD(cleanup_wait_queue);
-+
-+
-+static unsigned int read_dock_state(void)
-+{
-+	u32 state;
-+
-+	state = au1xxx_gpio_read(DOCK_GPIO);
-+	
-+	/* printk( "Current Dock State: %d\n", state ); */
-+
-+	return state;
-+}
-+
-+
-+static void dock_timer_periodic(void *data)
-+{
-+	struct au1xxx_dock *dock = (struct au1xxx_dock *)data;
-+	unsigned long dock_state;
-+	
-+	/* If cleanup wants us to die */
-+	if (cleanup_flag) {
-+		/* now cleanup_module can return */
-+		wake_up(&cleanup_wait_queue); 
-+	} else {
-+		/* put ourselves back in the task queue */
-+		queue_task(&dock_task, &tq_timer);	
-+	}
-+
-+	/* read current dock */
-+	dock_state = read_dock_state();
-+
-+	/* if dock states hasn't changed */
-+	/* save time and be done. */
-+	if (dock_state == dock->current) {
-+		return;
-+	}
-+	
-+	if (dock_state == dock->debounce) {
-+		dock->current = dock_state;
-+	} else {
-+		dock->debounce = dock_state;
-+	}
-+	if (dock->current != dock->last) {
-+		if (waitqueue_active(&dock->read_wait)) {
-+		    wake_up_interruptible(&dock->read_wait);
-+		}
-+	}
-+}
-+
-+
-+static ssize_t au1xxx_dock_read(struct file *filp, char *buffer, size_t count, loff_t *ppos)
-+{
-+	struct au1xxx_dock *dock = filp->private_data;
-+	char event[3];
-+	int last;
-+	int cur;
-+	int err;
-+	
-+try_again:
-+
-+	while (dock->current == dock->last) {
-+		if (filp->f_flags & O_NONBLOCK) {
-+			return -EAGAIN;
-+		}
-+		interruptible_sleep_on(&dock->read_wait);
-+		if (signal_pending(current)) {
-+			return -ERESTARTSYS;
-+		}
-+	}
-+	
-+	cur  = dock->current;
-+	last = dock->last;
-+
-+	if(cur != last)
-+	{
-+		event[0] = cur ? 'D' : 'U';
-+		event[1] = '\r';
-+		event[2] = '\n';
-+	}
-+	else
-+		goto try_again;
-+	
-+	dock->last = cur;
-+	err = copy_to_user(buffer, &event, 3);
-+	if (err) {
-+		return err;
-+	}
-+	
-+	return 3;
-+}
-+
-+
-+static int au1xxx_dock_open(struct inode *inode, struct file *filp)
-+{
-+	struct au1xxx_dock *dock = &dock_info;
-+
-+	MOD_INC_USE_COUNT;
-+
-+	filp->private_data = dock;
-+
-+	if (dock->open_count++ == 0) {
-+		dock_task.data = dock;
-+		cleanup_flag = 0;
-+		queue_task(&dock_task, &tq_timer);
-+	}
-+
-+	return 0;
-+}
-+
-+
-+static unsigned int au1xxx_dock_poll(struct file *filp, poll_table *wait)
-+{
-+	struct au1xxx_dock *dock = filp->private_data;
-+	int ret = 0;
-+
-+	DPRINTK("start\n");
-+	poll_wait(filp, &dock->read_wait, wait);
-+	if (dock->current != dock->last) {
-+		ret = POLLIN | POLLRDNORM;
-+	}
-+	return ret;
-+}
-+
-+
-+static int au1xxx_dock_release(struct inode *inode, struct file *filp)
-+{
-+	struct au1xxx_dock *dock = filp->private_data;
-+
-+	DPRINTK("start\n");
-+
-+	if (--dock->open_count == 0) {
-+		cleanup_flag = 1;
-+		sleep_on(&cleanup_wait_queue);
-+	}
-+	MOD_DEC_USE_COUNT;
-+	
-+	return 0;
-+}
-+
-+
-+
-+static struct file_operations au1xxx_dock_fops = {
-+	owner:		THIS_MODULE,
-+	read:		au1xxx_dock_read,
-+	poll:		au1xxx_dock_poll,
-+	open:		au1xxx_dock_open,
-+	release:	au1xxx_dock_release,
-+};
-+
-+/*
-+ * The au1xxx dock is a misc device:
-+ * Major 10 char
-+ * Minor 22        /dev/dock
-+ * 
-+ * This is /dev/misc/dock if devfs is used.
-+ */
-+
-+static struct miscdevice au1xxx_dock_dev = {
-+	minor:	23,
-+	name:	"dock",
-+	fops:	&au1xxx_dock_fops,
-+};
-+
-+static int __init au1xxx_dock_init(void)
-+{
-+	struct au1xxx_dock *dock = &dock_info;
-+	int ret;
-+
-+	DPRINTK("Initializing dock driver\n");
-+	dock->open_count = 0;
-+	cleanup_flag        = 0;
-+	init_waitqueue_head(&dock->read_wait);
-+
-+
-+	/* yamon configures GPIO pins for the dock
-+	 * no initialization needed
-+	 */
-+
-+	ret = misc_register(&au1xxx_dock_dev);
-+
-+	DPRINTK("dock driver fully initialized.\n");
-+
-+	return ret;
-+}
-+
-+
-+static void __exit au1xxx_dock_exit(void)
-+{
-+	DPRINTK("unloading dock driver\n");
-+	misc_deregister(&au1xxx_dock_dev);
-+}
-+
-+
-+module_init(au1xxx_dock_init);
-+module_exit(au1xxx_dock_exit);
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/ficmmp/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/board_setup.c
---- linux-2.4.32-rc1/arch/mips/au1000/ficmmp/board_setup.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/board_setup.c	2005-03-19 08:17:51.000000000 +0100
-@@ -0,0 +1,226 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ *	Alchemy Pb1200 board setup.
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/ioport.h>
-+#include <linux/mm.h>
-+#include <linux/console.h>
-+#include <linux/mc146818rtc.h>
-+#include <linux/delay.h>
-+#include <linux/ide.h>
-+
-+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
-+#include <linux/ide.h>
-+#endif
-+
-+#include <asm/cpu.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/keyboard.h>
-+#include <asm/mipsregs.h>
-+#include <asm/reboot.h>
-+#include <asm/pgtable.h>
-+#include <asm/au1000.h>
-+#include <asm/ficmmp.h>
-+#include <asm/au1xxx_dbdma.h>
-+#include <asm/au1xxx_gpio.h>
-+
-+extern struct rtc_ops no_rtc_ops;
-+
-+/* value currently in the board configuration register */
-+u16 ficmmp_config = 0;
-+
-+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
-+extern struct ide_ops *ide_ops;
-+extern struct ide_ops au1xxx_ide_ops;
-+extern u32 au1xxx_ide_virtbase;
-+extern u64 au1xxx_ide_physbase;
-+extern int au1xxx_ide_irq;
-+
-+u32 led_base_addr;
-+/* Ddma */
-+chan_tab_t *ide_read_ch, *ide_write_ch;
-+u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma
-+
-+dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 };
-+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */
-+
-+void board_reset (void)
-+{
-+	au_writel(0, 0xAD80001C);
-+}
-+
-+void board_power_off (void)
-+{
-+}
-+
-+void __init board_setup(void)
-+{
-+	char *argptr = NULL;
-+	u32 pin_func;
-+	rtc_ops = &no_rtc_ops;
-+
-+	ficmmp_config_init();	//Initialize FIC control register
-+	
-+#if 0
-+	/* Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
-+	 * but it is board specific code, so put it here.
-+	 */
-+	pin_func = au_readl(SYS_PINFUNC);
-+	au_sync();
-+	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
-+	au_writel(pin_func, SYS_PINFUNC);
-+
-+	au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
-+	au_sync();
-+#endif
-+
-+#if defined( CONFIG_I2C_ALGO_AU1550 )
-+	{
-+	u32 freq0, clksrc;
-+
-+	/* Select SMBUS in CPLD */
-+	/* bcsr->resets &= ~(BCSR_RESETS_PCS0MUX); */
-+
-+	pin_func = au_readl(SYS_PINFUNC);
-+	au_sync();
-+	pin_func &= ~(3<<17 | 1<<4);
-+	/* Set GPIOs correctly */
-+	pin_func |= 2<<17;
-+	au_writel(pin_func, SYS_PINFUNC);
-+	au_sync();
-+
-+	/* The i2c driver depends on 50Mhz clock */
-+	freq0 = au_readl(SYS_FREQCTRL0);
-+	au_sync();
-+	freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
-+	freq0 |= (3<<SYS_FC_FRDIV1_BIT);
-+	/* 396Mhz / (3+1)*2 == 49.5Mhz */
-+	au_writel(freq0, SYS_FREQCTRL0);
-+	au_sync();
-+	freq0 |= SYS_FC_FE1;
-+	au_writel(freq0, SYS_FREQCTRL0);
-+	au_sync();
-+
-+	clksrc = au_readl(SYS_CLKSRC);
-+	au_sync();
-+	clksrc &= ~0x01f00000;
-+	/* bit 22 is EXTCLK0 for PSC0 */
-+	clksrc |= (0x3 << 22);
-+	au_writel(clksrc, SYS_CLKSRC);
-+	au_sync();
-+	}
-+#endif
-+
-+#ifdef CONFIG_FB_AU1200
-+	argptr = prom_getcmdline();
-+	strcat(argptr, " video=au1200fb:");
-+#endif
-+
-+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
-+	/*
-+	 * Iniz IDE parameters
-+	 */
-+	ide_ops = &au1xxx_ide_ops;
-+	au1xxx_ide_irq = FICMMP_IDE_INT;
-+	au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR;
-+	au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR);
-+	switch4ddma = 0;
-+	/*
-+	ide_ops = &au1xxx_ide_ops;
-+	au1xxx_ide_irq = FICMMP_IDE_INT;
-+	au1xxx_ide_base = KSEG1ADDR(AU1XXX_ATA_BASE);
-+	*/
-+	au1xxx_gpio_write(9, 1);
-+	printk("B4001010: %X\n", *((u32*)0xB4001010));
-+	printk("B4001014: %X\n", *((u32*)0xB4001014));
-+	printk("B4001018: %X\n", *((u32*)0xB4001018));
-+	printk("B1900100: %X\n", *((u32*)0xB1900100));
-+	
-+#if 0
-+	ficmmp_config_clear(FICMMP_CONFIG_IDERST);
-+	mdelay(100);
-+	ficmmp_config_set(FICMMP_CONFIG_IDERST);
-+	mdelay(100);
-+#endif
-+	/*
-+	 * change PIO or PIO+Ddma
-+	 * check the GPIO-5 pin condition. pb1200:s18_dot
-+	 */
-+/*	switch4ddma = 0; //(au_readl(SYS_PINSTATERD) & (1 << 5)) ? 1 : 0; */
-+#endif
-+
-+	/* The Pb1200 development board uses external MUX for PSC0 to
-+	support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
-+	*/
-+#if defined(CONFIG_AU1550_PSC_SPI) && defined(CONFIG_I2C_ALGO_AU1550)
-+	#error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
-+			Refer to Pb1200 documentation.
-+#elif defined( CONFIG_AU1550_PSC_SPI )
-+	//bcsr->resets |= BCSR_RESETS_PCS0MUX;
-+#elif defined( CONFIG_I2C_ALGO_AU1550 )
-+	//bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
-+#endif
-+	au_sync();
-+
-+	printk("FIC Multimedia Player Board\n");
-+	au1xxx_gpio_tristate(5);
-+	printk("B1900100: %X\n", *((volatile u32*)0xB1900100));
-+	printk("B190002C: %X\n", *((volatile u32*)0xB190002C));
-+}
-+
-+int
-+board_au1200fb_panel (void)
-+{
-+	au1xxx_gpio_tristate(6);
-+
-+	if (au1xxx_gpio_read(12) == 0)
-+		return 9; /* FS453_640x480 (Composite/S-Video) */
-+	else
-+		return 7; /* Sharp 320x240 TFT */
-+}
-+
-+int
-+board_au1200fb_panel_init (void)
-+{
-+	/*Enable data buffers*/
-+	ficmmp_config_clear(FICMMP_CONFIG_LCMDATAOUT);
-+	/*Take LCD out of reset*/
-+	ficmmp_config_set(FICMMP_CONFIG_LCMPWREN | FICMMP_CONFIG_LCMEN);
-+	return 0;
-+}
-+
-+int 
-+board_au1200fb_panel_shutdown (void)
-+{
-+	/*Disable data buffers*/
-+	ficmmp_config_set(FICMMP_CONFIG_LCMDATAOUT);
-+	/*Put LCD in reset, remove power*/
-+	ficmmp_config_clear(FICMMP_CONFIG_LCMEN | FICMMP_CONFIG_LCMPWREN);
-+	return 0;
-+}
-+
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/ficmmp/init.c linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/init.c
---- linux-2.4.32-rc1/arch/mips/au1000/ficmmp/init.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/init.c	2005-01-30 09:01:27.000000000 +0100
-@@ -0,0 +1,76 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ *	PB1200 board setup
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/sched.h>
-+#include <linux/bootmem.h>
-+#include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <linux/config.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+
-+int prom_argc;
-+char **prom_argv, **prom_envp;
-+extern void  __init prom_init_cmdline(void);
-+extern char *prom_getenv(char *envname);
-+
-+const char *get_system_type(void)
-+{
-+	return "FIC Multimedia Player (Au1200)";
-+}
-+
-+u32 mae_memsize = 0;
-+
-+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-+{
-+	unsigned char *memsize_str;
-+	unsigned long memsize;
-+
-+	prom_argc = argc;
-+	prom_argv = argv;
-+	prom_envp = envp;
-+
-+	mips_machgroup = MACH_GROUP_ALCHEMY;
-+	mips_machtype = MACH_PB1000;	/* set the platform # */   
-+	prom_init_cmdline();
-+
-+	memsize_str = prom_getenv("memsize");
-+	if (!memsize_str) {
-+		memsize = 0x08000000;
-+	} else {
-+		memsize = simple_strtol(memsize_str, NULL, 0);
-+	}
-+
-+	/* reserved 32MB for MAE driver */
-+	memsize -= (32 * 1024 * 1024);
-+	add_memory_region(0, memsize, BOOT_MEM_RAM);
-+	mae_memsize = memsize; /* for drivers/char/au1xxx_mae.c */
-+	return 0;
-+}
-+
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/ficmmp/irqmap.c linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/irqmap.c
---- linux-2.4.32-rc1/arch/mips/au1000/ficmmp/irqmap.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/irqmap.c	2005-01-30 09:01:27.000000000 +0100
-@@ -0,0 +1,61 @@
-+/*
-+ * BRIEF MODULE DESCRIPTION
-+ *	Au1xxx irq map table
-+ *
-+ *  This program is free software; you can redistribute	 it and/or modify it
-+ *  under  the terms of	 the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the	License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
-+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
-+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/module.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/timex.h>
-+#include <linux/slab.h>
-+#include <linux/random.h>
-+#include <linux/delay.h>
-+
-+#include <asm/bitops.h>
-+#include <asm/bootinfo.h>
-+#include <asm/io.h>
-+#include <asm/mipsregs.h>
-+#include <asm/system.h>
-+#include <asm/au1000.h>
-+#include <asm/ficmmp.h>
-+
-+au1xxx_irq_map_t au1xxx_irq_map[] = {
-+	{ FICMMP_IDE_INT, INTC_INT_HIGH_LEVEL, 0 },
-+	{ AU1XXX_SMC91111_IRQ, INTC_INT_HIGH_LEVEL, 0 },
-+	{ AU1000_GPIO_1 , INTC_INT_FALL_EDGE, 0 },		// main button
-+	{ AU1000_GPIO_6 , INTC_INT_RISE_EDGE, 0 },		// select button
-+	{ AU1000_GPIO_12, INTC_INT_FALL_EDGE, 0 },		// guide button
-+	{ AU1000_GPIO_17, INTC_INT_RISE_EDGE, 0 },		// down button
-+	{ AU1000_GPIO_19, INTC_INT_RISE_EDGE, 0 },		// left button
-+	{ AU1000_GPIO_26, INTC_INT_RISE_EDGE, 0 },		// right button
-+	{ AU1000_GPIO_28, INTC_INT_RISE_EDGE, 0 },		// up button
-+};
-+
-+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
-+
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/ficmmp/Makefile linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/Makefile
---- linux-2.4.32-rc1/arch/mips/au1000/ficmmp/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/Makefile	2005-01-30 09:01:27.000000000 +0100
-@@ -0,0 +1,25 @@
-+#
-+#  Copyright 2000 MontaVista Software Inc.
-+#  Author: MontaVista Software, Inc.
-+#     	ppopov@mvista.com or source@mvista.com
-+#
-+# Makefile for the Alchemy Semiconductor FIC board.
-+#
-+# Note! Dependencies are done automagically by 'make dep', which also
-+# removes any old dependencies. DON'T put your own dependencies here
-+# unless it's something special (ie not a .c file).
-+#
-+
-+USE_STANDARD_AS_RULE := true
-+
-+O_TARGET := ficmmp.o
-+
-+obj-y := init.o board_setup.o irqmap.o au1200_ibutton.o au1xxx_dock.o
-+
-+ifdef CONFIG_MMC
-+obj-y += mmc_support.o
-+export-objs +=mmc_support.o
-+endif
-+
-+
-+include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/board_setup.c
---- linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/board_setup.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/board_setup.c	2005-03-19 08:17:51.000000000 +0100
-@@ -51,12 +51,19 @@
- {
- }
- 
-+void board_power_off (void)
-+{
-+}
-+
- void __init board_setup(void)
- {
- 	u32 pin_func;
- 
- 	rtc_ops = &no_rtc_ops;
- 
-+	/* Set GPIO14 high to make CD/DAT1 high for MMC to work */
-+	au_writel(1<<14, SYS_OUTPUTSET);
-+
- #ifdef CONFIG_AU1X00_USB_DEVICE
- 	// 2nd USB port is USB device
- 	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/buttons.c linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/buttons.c
---- linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/buttons.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/buttons.c	2005-02-11 22:09:55.000000000 +0100
-@@ -0,0 +1,308 @@
-+/*
-+ *  Copyright (C) 2003 Metrowerks, All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/sched.h>
-+#include <linux/miscdevice.h>
-+#include <linux/errno.h>
-+#include <linux/poll.h>
-+#include <asm/au1000.h>
-+#include <asm/uaccess.h>
-+
-+#define BUTTON_SELECT	(1<<1)
-+#define BUTTON_1	(1<<2)
-+#define BUTTON_2	(1<<3)
-+#define BUTTON_ONOFF	(1<<6)
-+#define BUTTON_3	(1<<7)
-+#define BUTTON_4	(1<<8)
-+#define BUTTON_LEFT	(1<<9)
-+#define BUTTON_DOWN	(1<<10)
-+#define BUTTON_RIGHT	(1<<11)
-+#define BUTTON_UP	(1<<12)
-+
-+#define BUTTON_MASK (\
-+    BUTTON_SELECT	\
-+    | BUTTON_1   	\
-+    | BUTTON_2		\
-+    | BUTTON_ONOFF	\
-+    | BUTTON_3		\
-+    | BUTTON_4		\
-+    | BUTTON_LEFT	\
-+    | BUTTON_DOWN	\
-+    | BUTTON_RIGHT	\
-+    | BUTTON_UP		\
-+    )
-+
-+#define BUTTON_INVERT (\
-+    BUTTON_SELECT	\
-+    | BUTTON_1   	\
-+    | BUTTON_2		\
-+    | BUTTON_3		\
-+    | BUTTON_4		\
-+    | BUTTON_LEFT	\
-+    | BUTTON_DOWN	\
-+    | BUTTON_RIGHT	\
-+    | BUTTON_UP		\
-+    )
-+
-+
-+
-+#define MAKE_FLAG 0x20
-+
-+#undef DEBUG
-+
-+#define DEBUG 0
-+//#define DEBUG 1
-+
-+#if DEBUG
-+#define DPRINTK(format, args...) printk(__FUNCTION__ ": "  format, ## args)
-+#else
-+#define DPRINTK(format, args...) do { } while (0)
-+#endif
-+
-+/* Please note that this driver is based on a timer and is not interrupt
-+ * driven.  If you are going to make use of this driver, you will need to have
-+ * your application open the buttons listing from the /dev directory first.
-+ */
-+
-+struct hydrogen3_buttons {
-+	struct fasync_struct *fasync;
-+	wait_queue_head_t     read_wait;
-+	int open_count;
-+	unsigned int debounce;
-+	unsigned int current;
-+	unsigned int last;
-+};
-+
-+static struct hydrogen3_buttons buttons_info;
-+
-+
-+static void button_timer_periodic(void *data);
-+
-+static struct tq_struct button_task = {
-+	routine:	button_timer_periodic,
-+	data:		NULL
-+};
-+
-+static int cleanup_flag = 0;
-+static DECLARE_WAIT_QUEUE_HEAD(cleanup_wait_queue);
-+
-+
-+static unsigned int read_button_state(void)
-+{
-+	unsigned long state;
-+
-+	state = inl(SYS_PINSTATERD) & BUTTON_MASK;
-+	state ^= BUTTON_INVERT;
-+	
-+	DPRINTK( "Current Button State: %d\n", state );
-+
-+	return state;
-+}
-+
-+
-+static void button_timer_periodic(void *data)
-+{
-+	struct hydrogen3_buttons *buttons = (struct hydrogen3_buttons *)data;
-+	unsigned long button_state;
-+	
-+	// If cleanup wants us to die
-+	if (cleanup_flag) {
-+		wake_up(&cleanup_wait_queue);		// now cleanup_module can return
-+	} else {
-+		queue_task(&button_task, &tq_timer);	// put ourselves back in the task queue
-+	}
-+
-+	// read current buttons
-+	button_state = read_button_state();
-+
-+	// if no buttons are down and nothing to do then
-+	// save time and be done.
-+	if ((button_state == 0) && (buttons->current == 0)) {
-+		return;
-+	}
-+	
-+	if (button_state == buttons->debounce) {
-+		buttons->current = button_state;
-+	} else {
-+		buttons->debounce = button_state;
-+	}
-+//	printk("0x%04x\n", button_state);
-+	if (buttons->current != buttons->last) {
-+		if (waitqueue_active(&buttons->read_wait)) {
-+		    wake_up_interruptible(&buttons->read_wait);
-+		}
-+	}
-+}
-+
-+
-+static ssize_t hydrogen3_buttons_read(struct file *filp, char *buffer, size_t count, loff_t *ppos)
-+{
-+	struct hydrogen3_buttons *buttons = filp->private_data;
-+	char events[16];
-+	int index;
-+	int last;
-+	int cur;
-+	int bit;
-+	int bit_mask;
-+	int err;
-+	
-+	DPRINTK("start\n");
-+
-+try_again:
-+
-+	while (buttons->current == buttons->last) {
-+		if (filp->f_flags & O_NONBLOCK) {
-+			return -EAGAIN;
-+		}
-+		interruptible_sleep_on(&buttons->read_wait);
-+		if (signal_pending(current)) {
-+			return -ERESTARTSYS;
-+		}
-+	}
-+	
-+	cur  = buttons->current;
-+	last = buttons->last;
-+	
-+	index    = 0;
-+	bit_mask = 1;
-+	for (bit = 0; (bit < 16) && count; bit++) {
-+		if ((cur ^ last) & bit_mask) {
-+			if (cur & bit_mask) {
-+				events[index] = (bit | MAKE_FLAG) + 'A';
-+				last |= bit_mask;
-+			} else {
-+				events[index] = bit + 'A';
-+				last &= ~bit_mask;
-+			}
-+			index++;
-+			count--;
-+		}
-+		bit_mask <<= 1;
-+	}
-+	buttons->last = last;
-+	
-+	if (index == 0) {
-+		goto try_again;
-+	}
-+	
-+	err = copy_to_user(buffer, events, index);
-+	if (err) {
-+		return err;
-+	}
-+	
-+	return index;
-+}
-+
-+
-+static int hydrogen3_buttons_open(struct inode *inode, struct file *filp)
-+{
-+	struct hydrogen3_buttons *buttons = &buttons_info;
-+
-+	DPRINTK("start\n");
-+	MOD_INC_USE_COUNT;
-+
-+	filp->private_data = buttons;
-+
-+	if (buttons->open_count++ == 0) {
-+		button_task.data = buttons;
-+		cleanup_flag = 0;
-+		queue_task(&button_task, &tq_timer);
-+	}
-+
-+	return 0;
-+}
-+
-+
-+static unsigned int hydrogen3_buttons_poll(struct file *filp, poll_table *wait)
-+{
-+	struct hydrogen3_buttons *buttons = filp->private_data;
-+	int ret = 0;
-+
-+	DPRINTK("start\n");
-+	poll_wait(filp, &buttons->read_wait, wait);
-+	if (buttons->current != buttons->last) {
-+		ret = POLLIN | POLLRDNORM;
-+	}
-+	return ret;
-+}
-+
-+
-+static int hydrogen3_buttons_release(struct inode *inode, struct file *filp)
-+{
-+	struct hydrogen3_buttons *buttons = filp->private_data;
-+
-+	DPRINTK("start\n");
-+
-+	if (--buttons->open_count == 0) {
-+		cleanup_flag = 1;
-+		sleep_on(&cleanup_wait_queue);
-+	}
-+	MOD_DEC_USE_COUNT;
-+	
-+	return 0;
-+}
-+
-+
-+
-+static struct file_operations hydrogen3_buttons_fops = {
-+	owner:		THIS_MODULE,
-+	read:		hydrogen3_buttons_read,
-+	poll:		hydrogen3_buttons_poll,
-+	open:		hydrogen3_buttons_open,
-+	release:	hydrogen3_buttons_release,
-+};
-+
-+/*
-+ * The hydrogen3 buttons is a misc device:
-+ * Major 10 char
-+ * Minor 22        /dev/buttons
-+ * 
-+ * This is /dev/misc/buttons if devfs is used.
-+ */
-+
-+static struct miscdevice hydrogen3_buttons_dev = {
-+	minor:	22,
-+	name:	"buttons",
-+	fops:	&hydrogen3_buttons_fops,
-+};
-+
-+static int __init hydrogen3_buttons_init(void)
-+{
-+	struct hydrogen3_buttons *buttons = &buttons_info;
-+	int ret;
-+
-+	DPRINTK("Initializing buttons driver\n");
-+	buttons->open_count = 0;
-+	cleanup_flag        = 0;
-+	init_waitqueue_head(&buttons->read_wait);
-+
-+
-+	// yamon configures GPIO pins for the buttons
-+	// no initialization needed
-+
-+	ret = misc_register(&hydrogen3_buttons_dev);
-+
-+	DPRINTK("Buttons driver fully initialized.\n");
-+
-+	return ret;
-+}
-+
-+
-+static void __exit hydrogen3_buttons_exit(void)
-+{
-+	DPRINTK("unloading buttons driver\n");
-+	misc_deregister(&hydrogen3_buttons_dev);
-+}
-+
-+
-+module_init(hydrogen3_buttons_init);
-+module_exit(hydrogen3_buttons_exit);
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/Makefile linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/Makefile
---- linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/Makefile	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/Makefile	2005-02-11 22:09:55.000000000 +0100
-@@ -14,6 +14,11 @@
- 
- O_TARGET := hydrogen3.o
- 
--obj-y := init.o board_setup.o irqmap.o
-+obj-y := init.o board_setup.o irqmap.o buttons.o
-+
-+ifdef CONFIG_MMC
-+obj-y += mmc_support.o
-+export-objs +=mmc_support.o
-+endif
- 
- include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/mmc_support.c linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/mmc_support.c
---- linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/mmc_support.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/mmc_support.c	2005-02-02 05:27:06.000000000 +0100
-@@ -0,0 +1,89 @@
-+/*
-+ * BRIEF MODULE DESCRIPTION
-+ *
-+ *	MMC support routines for Hydrogen3.
-+ *
-+ *
-+ * Copyright (c) 2003-2004 Embedded Edge, LLC.
-+ * Author: Embedded Edge, LLC.
-+ * Contact: dan@embeddededge.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <asm/irq.h>
-+#include <asm/au1000.h>
-+#include <asm/au1100_mmc.h>
-+
-+#define GPIO_17_WP 0x20000
-+
-+/* SD/MMC controller support functions */
-+
-+/*
-+ * Detect card.
-+ */
-+void mmc_card_inserted(int _n_, int *_res_)
-+{
-+	u32 gpios = au_readl(SYS_PINSTATERD);
-+	u32 emptybit = (1<<16);
-+	*_res_ = ((gpios & emptybit) == 0);
-+}
-+
-+/*
-+ * Check card write protection.
-+ */
-+void mmc_card_writable(int _n_, int *_res_)
-+{
-+	unsigned long mmc_wp, board_specific; 
-+		board_specific = au_readl(SYS_OUTPUTSET);
-+		mmc_wp=GPIO_17_WP;
-+		if (!(board_specific & mmc_wp)) {/* low means card writable */ 
-+			*_res_ = 1; 
-+		} else {
-+			*_res_ = 0; 
-+		} 
-+}
-+/*
-+ * Apply power to card slot.
-+ */
-+void mmc_power_on(int _n_)
-+{
-+}
-+
-+/*
-+ * Remove power from card slot.
-+ */
-+void mmc_power_off(int _n_)
-+{
-+}
-+
-+EXPORT_SYMBOL(mmc_card_inserted);
-+EXPORT_SYMBOL(mmc_card_writable);
-+EXPORT_SYMBOL(mmc_power_on);
-+EXPORT_SYMBOL(mmc_power_off);
-+
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/mtx-1/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/mtx-1/board_setup.c
---- linux-2.4.32-rc1/arch/mips/au1000/mtx-1/board_setup.c	2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/mtx-1/board_setup.c	2004-11-26 09:37:16.000000000 +0100
-@@ -48,6 +48,12 @@
- 
- extern struct rtc_ops no_rtc_ops;
- 
-+void board_reset (void)
-+{
-+	/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
-+	au_writel(0x00000000, 0xAE00001C);
-+}
-+
- void __init board_setup(void)
- {
- 	rtc_ops = &no_rtc_ops;
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/mtx-1/irqmap.c linux-2.4.32-rc1.mips/arch/mips/au1000/mtx-1/irqmap.c
---- linux-2.4.32-rc1/arch/mips/au1000/mtx-1/irqmap.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/mtx-1/irqmap.c	2004-11-26 09:37:16.000000000 +0100
-@@ -72,10 +72,10 @@
- 	 *	A       B       C       D
- 	 */
- 	{
--		{INTA, INTB, INTC, INTD},   /* IDSEL 0 */
--		{INTA, INTB, INTC, INTD},   /* IDSEL 1 */
--		{INTA, INTB, INTC, INTD},   /* IDSEL 2 */
--		{INTA, INTB, INTC, INTD},   /* IDSEL 3 */
-+		{INTA, INTB, INTX, INTX},   /* IDSEL 0 */
-+		{INTB, INTA, INTX, INTX},   /* IDSEL 1 */
-+		{INTC, INTD, INTX, INTX},   /* IDSEL 2 */
-+		{INTD, INTC, INTX, INTX},   /* IDSEL 3 */
- 	};
- 	const long min_idsel = 0, max_idsel = 3, irqs_per_slot = 4;
- 	return PCI_IRQ_TABLE_LOOKUP;
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1000/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1000/board_setup.c
---- linux-2.4.32-rc1/arch/mips/au1000/pb1000/board_setup.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1000/board_setup.c	2005-03-19 08:17:51.000000000 +0100
-@@ -58,6 +58,10 @@
- {
- }
- 
-+void board_power_off (void)
-+{
-+}
-+
- void __init board_setup(void)
- {
- 	u32 pin_func, static_cfg0;
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1100/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1100/board_setup.c
---- linux-2.4.32-rc1/arch/mips/au1000/pb1100/board_setup.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1100/board_setup.c	2005-03-19 08:17:51.000000000 +0100
-@@ -62,6 +62,10 @@
-     au_writel(0x00000000, 0xAE00001C);
- }
- 
-+void board_power_off (void)
-+{
-+}
-+
- void __init board_setup(void)
- {
- 	u32 pin_func;
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1100/Makefile linux-2.4.32-rc1.mips/arch/mips/au1000/pb1100/Makefile
---- linux-2.4.32-rc1/arch/mips/au1000/pb1100/Makefile	2003-08-25 13:44:39.000000000 +0200
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1100/Makefile	2005-01-30 09:10:29.000000000 +0100
-@@ -16,4 +16,10 @@
- 
- obj-y := init.o board_setup.o irqmap.o
- 
-+
-+ifdef CONFIG_MMC
-+obj-y += mmc_support.o
-+export-objs += mmc_support.o
-+endif
-+
- include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1100/mmc_support.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1100/mmc_support.c
---- linux-2.4.32-rc1/arch/mips/au1000/pb1100/mmc_support.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1100/mmc_support.c	2005-01-30 09:10:29.000000000 +0100
-@@ -0,0 +1,126 @@
-+/*
-+ * BRIEF MODULE DESCRIPTION
-+ *
-+ *	MMC support routines for PB1100.
-+ *
-+ *
-+ * Copyright (c) 2003-2004 Embedded Edge, LLC.
-+ * Author: Embedded Edge, LLC.
-+ * Contact: dan@embeddededge.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <asm/irq.h>
-+#include <asm/au1000.h>
-+#include <asm/au1100_mmc.h>
-+#include <asm/pb1100.h>
-+
-+
-+/* SD/MMC controller support functions */
-+
-+/*
-+ * Detect card.
-+ */
-+void mmc_card_inserted(int _n_, int *_res_)
-+{
-+	u32 gpios = au_readl(SYS_PINSTATERD);
-+	u32 emptybit = (_n_) ? (1<<15) : (1<<14);
-+	*_res_ = ((gpios & emptybit) == 0);
-+}
-+
-+/*
-+ * Check card write protection.
-+ */
-+void mmc_card_writable(int _n_, int *_res_)
-+{
-+	BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+	unsigned long mmc_wp, board_specific;
-+
-+	if (_n_) {
-+		mmc_wp = BCSR_PCMCIA_SD1_WP;
-+	} else {
-+		mmc_wp = BCSR_PCMCIA_SD0_WP;
-+	}
-+
-+	board_specific = au_readl((unsigned long)(&bcsr->pcmcia));
-+
-+	if (!(board_specific & mmc_wp)) {/* low means card writable */
-+		*_res_ = 1;
-+	} else {
-+		*_res_ = 0;
-+	}
-+}
-+
-+/*
-+ * Apply power to card slot.
-+ */
-+void mmc_power_on(int _n_)
-+{
-+	BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+	unsigned long mmc_pwr, board_specific;
-+
-+	if (_n_) {
-+		mmc_pwr = BCSR_PCMCIA_SD1_PWR;
-+	} else {
-+		mmc_pwr = BCSR_PCMCIA_SD0_PWR;
-+	}
-+
-+	board_specific = au_readl((unsigned long)(&bcsr->pcmcia));
-+	board_specific |= mmc_pwr;
-+
-+	au_writel(board_specific, (int)(&bcsr->pcmcia));
-+	au_sync_delay(1);
-+}
-+
-+/*
-+ * Remove power from card slot.
-+ */
-+void mmc_power_off(int _n_)
-+{
-+	BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+	unsigned long mmc_pwr, board_specific;
-+
-+	if (_n_) {
-+		mmc_pwr = BCSR_PCMCIA_SD1_PWR;
-+	} else {
-+		mmc_pwr = BCSR_PCMCIA_SD0_PWR;
-+	}
-+
-+	board_specific = au_readl((unsigned long)(&bcsr->pcmcia));
-+	board_specific &= ~mmc_pwr;
-+
-+	au_writel(board_specific, (int)(&bcsr->pcmcia));
-+	au_sync_delay(1);
-+}
-+
-+EXPORT_SYMBOL(mmc_card_inserted);
-+EXPORT_SYMBOL(mmc_card_writable);
-+EXPORT_SYMBOL(mmc_power_on);
-+EXPORT_SYMBOL(mmc_power_off);
-+
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1200/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/board_setup.c
---- linux-2.4.32-rc1/arch/mips/au1000/pb1200/board_setup.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/board_setup.c	2005-03-19 08:17:51.000000000 +0100
-@@ -0,0 +1,221 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ *	Alchemy Pb1200 board setup.
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/ioport.h>
-+#include <linux/mm.h>
-+#include <linux/console.h>
-+#include <linux/mc146818rtc.h>
-+#include <linux/delay.h>
-+
-+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
-+#include <linux/ide.h>
-+#endif
-+
-+#include <asm/cpu.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/keyboard.h>
-+#include <asm/mipsregs.h>
-+#include <asm/reboot.h>
-+#include <asm/pgtable.h>
-+#include <asm/au1000.h>
-+#include <asm/au1xxx_dbdma.h>
-+
-+#ifdef CONFIG_MIPS_PB1200
-+#include <asm/pb1200.h>
-+#endif
-+
-+#ifdef CONFIG_MIPS_DB1200
-+#include <asm/db1200.h>
-+#define PB1200_ETH_INT DB1200_ETH_INT
-+#define PB1200_IDE_INT DB1200_IDE_INT
-+#endif
-+
-+extern struct rtc_ops no_rtc_ops;
-+
-+extern void _board_init_irq(void);
-+extern void	(*board_init_irq)(void);
-+
-+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX
-+extern struct ide_ops *ide_ops;
-+extern struct ide_ops au1xxx_ide_ops;
-+extern u32 au1xxx_ide_virtbase;
-+extern u64 au1xxx_ide_physbase;
-+extern int au1xxx_ide_irq;
-+
-+u32 led_base_addr;
-+/* Ddma */
-+chan_tab_t *ide_read_ch, *ide_write_ch;
-+u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma
-+
-+dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 };
-+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */
-+
-+void board_reset (void)
-+{
-+	bcsr->resets = 0;
-+}
-+
-+void board_power_off (void)
-+{
-+	bcsr->resets = 0xC000;
-+}
-+
-+void __init board_setup(void)
-+{
-+	char *argptr = NULL;
-+	u32 pin_func;
-+	rtc_ops = &no_rtc_ops;
-+
-+#if 0
-+	/* Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
-+	 * but it is board specific code, so put it here.
-+	 */
-+	pin_func = au_readl(SYS_PINFUNC);
-+	au_sync();
-+	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
-+	au_writel(pin_func, SYS_PINFUNC);
-+
-+	au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
-+	au_sync();
-+#endif
-+
-+#if defined( CONFIG_I2C_ALGO_AU1550 )
-+	{
-+	u32 freq0, clksrc;
-+
-+	/* Select SMBUS in CPLD */
-+	bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
-+
-+	pin_func = au_readl(SYS_PINFUNC);
-+	au_sync();
-+	pin_func &= ~(3<<17 | 1<<4);
-+	/* Set GPIOs correctly */
-+	pin_func |= 2<<17;
-+	au_writel(pin_func, SYS_PINFUNC);
-+	au_sync();
-+
-+	/* The i2c driver depends on 50Mhz clock */
-+	freq0 = au_readl(SYS_FREQCTRL0);
-+	au_sync();
-+	freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
-+	freq0 |= (3<<SYS_FC_FRDIV1_BIT);
-+	/* 396Mhz / (3+1)*2 == 49.5Mhz */
-+	au_writel(freq0, SYS_FREQCTRL0);
-+	au_sync();
-+	freq0 |= SYS_FC_FE1;
-+	au_writel(freq0, SYS_FREQCTRL0);
-+	au_sync();
-+
-+	clksrc = au_readl(SYS_CLKSRC);
-+	au_sync();
-+	clksrc &= ~0x01f00000;
-+	/* bit 22 is EXTCLK0 for PSC0 */
-+	clksrc |= (0x3 << 22);
-+	au_writel(clksrc, SYS_CLKSRC);
-+	au_sync();
-+	}
-+#endif
-+
-+#ifdef CONFIG_FB_AU1200
-+	argptr = prom_getcmdline();
-+	strcat(argptr, " video=au1200fb:");
-+#endif
-+
-+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
-+	/*
-+	 * Iniz IDE parameters
-+	 */
-+	ide_ops = &au1xxx_ide_ops;
-+	au1xxx_ide_irq = PB1200_IDE_INT;
-+	au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR;
-+	au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR);
-+	/*
-+	 * change PIO or PIO+Ddma
-+	 * check the GPIO-5 pin condition. pb1200:s18_dot */
-+	switch4ddma = (au_readl(SYS_PINSTATERD) & (1 << 5)) ? 1 : 0; 
-+#endif
-+
-+	/* The Pb1200 development board uses external MUX for PSC0 to
-+	support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
-+	*/
-+#if defined(CONFIG_AU1550_PSC_SPI) && defined(CONFIG_I2C_ALGO_AU1550)
-+	#error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
-+			Refer to Pb1200/Db1200 documentation.
-+#elif defined( CONFIG_AU1550_PSC_SPI )
-+	bcsr->resets |= BCSR_RESETS_PCS0MUX;
-+#elif defined( CONFIG_I2C_ALGO_AU1550 )
-+	bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
-+#endif
-+	au_sync();
-+
-+#ifdef CONFIG_MIPS_PB1200
-+	printk("AMD Alchemy Pb1200 Board\n");
-+#endif
-+#ifdef CONFIG_MIPS_DB1200
-+	printk("AMD Alchemy Db1200 Board\n");
-+#endif
-+
-+	/* Setup Pb1200 External Interrupt Controller */
-+	{
-+		extern void (*board_init_irq)(void);
-+		extern void _board_init_irq(void);
-+		board_init_irq = _board_init_irq;
-+	}
-+}
-+
-+int
-+board_au1200fb_panel (void)
-+{
-+	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+	int p;
-+
-+	p = bcsr->switches;
-+	p >>= 8;
-+	p &= 0x0F;
-+	return p;
-+}
-+
-+int
-+board_au1200fb_panel_init (void)
-+{
-+	/* Apply power */
-+    BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+	bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
-+	return 0;
-+}
-+
-+int
-+board_au1200fb_panel_shutdown (void)
-+{
-+	/* Remove power */
-+    BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+	bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
-+	return 0;
-+}
-+
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1200/init.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/init.c
---- linux-2.4.32-rc1/arch/mips/au1000/pb1200/init.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/init.c	2005-01-30 09:01:28.000000000 +0100
-@@ -0,0 +1,72 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ *	PB1200 board setup
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/sched.h>
-+#include <linux/bootmem.h>
-+#include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <linux/config.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+
-+int prom_argc;
-+char **prom_argv, **prom_envp;
-+extern void  __init prom_init_cmdline(void);
-+extern char *prom_getenv(char *envname);
-+
-+const char *get_system_type(void)
-+{
-+	return "AMD Alchemy Au1200/Pb1200";
-+}
-+
-+u32 mae_memsize = 0;
-+
-+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-+{
-+	unsigned char *memsize_str;
-+	unsigned long memsize;
-+
-+	prom_argc = argc;
-+	prom_argv = argv;
-+	prom_envp = envp;
-+
-+	mips_machgroup = MACH_GROUP_ALCHEMY;
-+	mips_machtype = MACH_PB1000;	/* set the platform # */   
-+	prom_init_cmdline();
-+
-+	memsize_str = prom_getenv("memsize");
-+	if (!memsize_str) {
-+		memsize = 0x08000000;
-+	} else {
-+		memsize = simple_strtol(memsize_str, NULL, 0);
-+	}
-+	add_memory_region(0, memsize, BOOT_MEM_RAM);
-+	return 0;
-+}
-+
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1200/irqmap.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/irqmap.c
---- linux-2.4.32-rc1/arch/mips/au1000/pb1200/irqmap.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/irqmap.c	2005-01-30 09:01:28.000000000 +0100
-@@ -0,0 +1,180 @@
-+/*
-+ * BRIEF MODULE DESCRIPTION
-+ *	Au1xxx irq map table
-+ *
-+ *  This program is free software; you can redistribute	 it and/or modify it
-+ *  under  the terms of	 the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the	License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
-+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
-+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/module.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/timex.h>
-+#include <linux/slab.h>
-+#include <linux/random.h>
-+#include <linux/delay.h>
-+
-+#include <asm/bitops.h>
-+#include <asm/bootinfo.h>
-+#include <asm/io.h>
-+#include <asm/mipsregs.h>
-+#include <asm/system.h>
-+#include <asm/au1000.h>
-+
-+#ifdef CONFIG_MIPS_PB1200
-+#include <asm/pb1200.h>
-+#endif
-+
-+#ifdef CONFIG_MIPS_DB1200
-+#include <asm/db1200.h>
-+#define PB1200_INT_BEGIN DB1200_INT_BEGIN
-+#define PB1200_INT_END DB1200_INT_END
-+#endif
-+
-+au1xxx_irq_map_t au1xxx_irq_map[] = {
-+	{ AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
-+};
-+
-+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
-+
-+/*
-+ *	Support for External interrupts on the PbAu1200 Development platform.
-+ */
-+static volatile int pb1200_cascade_en=0;
-+
-+void pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	unsigned short bisr = bcsr->int_status;
-+	int extirq_nr = 0;
-+
-+	/* Clear all the edge interrupts. This has no effect on level */
-+	bcsr->int_status = bisr;
-+	for( ; bisr; bisr &= (bisr-1) )
-+	{
-+		extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr);
-+		/* Ack and dispatch IRQ */
-+		do_IRQ(extirq_nr,regs);
-+	}
-+}
-+
-+inline void pb1200_enable_irq(unsigned int irq_nr)
-+{
-+	bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
-+	bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
-+}
-+
-+inline void pb1200_disable_irq(unsigned int irq_nr)
-+{
-+	bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
-+	bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
-+}
-+
-+static unsigned int pb1200_startup_irq( unsigned int irq_nr )
-+{
-+	if (++pb1200_cascade_en == 1)
-+	{
-+		request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
-+			0, "Pb1200 Cascade", &pb1200_cascade_handler );
-+#ifdef CONFIG_MIPS_PB1200
-+    /* We have a problem with CPLD rev3. Enable a workaround */
-+	if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
-+	{
-+		printk("\nWARNING!!!\n");
-+		printk("\nWARNING!!!\n");
-+		printk("\nWARNING!!!\n");
-+		printk("\nWARNING!!!\n");
-+		printk("\nWARNING!!!\n");
-+		printk("\nWARNING!!!\n");
-+		printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
-+		printk("updated to latest revision. This software will not\n");
-+		printk("work on anything less than CPLD rev4\n");
-+		printk("\nWARNING!!!\n");
-+		printk("\nWARNING!!!\n");
-+		printk("\nWARNING!!!\n");
-+		printk("\nWARNING!!!\n");
-+		printk("\nWARNING!!!\n");
-+		printk("\nWARNING!!!\n");
-+		while(1);
-+	}
-+#endif
-+	}
-+	pb1200_enable_irq(irq_nr);
-+	return 0;
-+}
-+
-+static void pb1200_shutdown_irq( unsigned int irq_nr )
-+{
-+	pb1200_disable_irq(irq_nr);
-+	if (--pb1200_cascade_en == 0)
-+	{
-+		free_irq(AU1000_GPIO_7,&pb1200_cascade_handler );
-+	}
-+	return;
-+}
-+
-+static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr)
-+{
-+	pb1200_disable_irq( irq_nr );
-+}
-+
-+static void pb1200_end_irq(unsigned int irq_nr)
-+{
-+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
-+		pb1200_enable_irq(irq_nr);
-+	}
-+}
-+
-+static struct hw_interrupt_type external_irq_type =
-+{
-+#ifdef CONFIG_MIPS_PB1200
-+	"Pb1200 Ext",
-+#endif
-+#ifdef CONFIG_MIPS_DB1200
-+	"Db1200 Ext",
-+#endif
-+	pb1200_startup_irq,
-+	pb1200_shutdown_irq,
-+	pb1200_enable_irq,
-+	pb1200_disable_irq,
-+	pb1200_mask_and_ack_irq,
-+	pb1200_end_irq,
-+	NULL
-+};
-+
-+void _board_init_irq(void)
-+{
-+	int irq_nr;
-+
-+	for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
-+	{
-+		irq_desc[irq_nr].handler = &external_irq_type;
-+		pb1200_disable_irq(irq_nr);
-+	}
-+
-+	/* GPIO_7 can not be hooked here, so it is hooked upon first
-+	request of any source attached to the cascade */
-+}
-+
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1200/Makefile linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/Makefile
---- linux-2.4.32-rc1/arch/mips/au1000/pb1200/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/Makefile	2005-01-30 09:01:27.000000000 +0100
-@@ -0,0 +1,25 @@
-+#
-+#  Copyright 2000 MontaVista Software Inc.
-+#  Author: MontaVista Software, Inc.
-+#     	ppopov@mvista.com or source@mvista.com
-+#
-+# Makefile for the Alchemy Semiconductor PB1000 board.
-+#
-+# Note! Dependencies are done automagically by 'make dep', which also
-+# removes any old dependencies. DON'T put your own dependencies here
-+# unless it's something special (ie not a .c file).
-+#
-+
-+USE_STANDARD_AS_RULE := true
-+
-+O_TARGET := pb1200.o
-+
-+obj-y := init.o board_setup.o irqmap.o
-+
-+ifdef CONFIG_MMC
-+obj-y += mmc_support.o
-+export-objs +=mmc_support.o
-+endif
-+
-+
-+include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1200/mmc_support.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/mmc_support.c
---- linux-2.4.32-rc1/arch/mips/au1000/pb1200/mmc_support.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/mmc_support.c	2005-01-30 09:01:28.000000000 +0100
-@@ -0,0 +1,141 @@
-+/*
-+ * BRIEF MODULE DESCRIPTION
-+ *
-+ *	MMC support routines for PB1200.
-+ *
-+ *
-+ * Copyright (c) 2003-2004 Embedded Edge, LLC.
-+ * Author: Embedded Edge, LLC.
-+ * Contact: dan@embeddededge.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <asm/irq.h>
-+#include <asm/au1000.h>
-+#include <asm/au1100_mmc.h>
-+
-+#ifdef CONFIG_MIPS_PB1200
-+#include <asm/pb1200.h>
-+#endif
-+
-+#ifdef CONFIG_MIPS_DB1200
-+/* NOTE: DB1200 only has SD0 pinned out and usable */
-+#include <asm/db1200.h>
-+#endif
-+
-+/* SD/MMC controller support functions */
-+
-+/*
-+ * Detect card.
-+ */
-+void mmc_card_inserted(int socket, int *result)
-+{
-+	u16 mask;
-+
-+	if (socket)
-+#ifdef CONFIG_MIPS_DB1200
-+		mask = 0;
-+#else
-+		mask = BCSR_INT_SD1INSERT; 
-+#endif
-+	else
-+		mask = BCSR_INT_SD0INSERT;
-+
-+	*result = ((bcsr->sig_status & mask) != 0);
-+}
-+
-+/*
-+ * Check card write protection.
-+ */
-+void mmc_card_writable(int socket, int *result)
-+{
-+	u16 mask;
-+
-+	if (socket)
-+#ifdef CONFIG_MIPS_DB1200
-+		mask = 0;
-+#else
-+		mask = BCSR_STATUS_SD1WP; 
-+#endif
-+	else
-+		mask = BCSR_STATUS_SD0WP;
-+
-+	/* low means card writable */
-+	if (!(bcsr->status & mask)) {
-+		*result = 1;
-+	} else {
-+		*result = 0;
-+	}
-+}
-+
-+/*
-+ * Apply power to card slot.
-+ */
-+void mmc_power_on(int socket)
-+{
-+	u16 mask;
-+
-+	if (socket)
-+#ifdef CONFIG_MIPS_DB1200
-+		mask = 0;
-+#else
-+		mask = BCSR_BOARD_SD1PWR;
-+#endif
-+	else
-+		mask = BCSR_BOARD_SD0PWR;
-+
-+	bcsr->board |= mask;
-+	au_sync_delay(1);
-+}
-+
-+/*
-+ * Remove power from card slot.
-+ */
-+void mmc_power_off(int socket)
-+{
-+	u16 mask;
-+
-+	if (socket)
-+#ifdef CONFIG_MIPS_DB1200
-+		mask = 0;
-+#else
-+		mask = BCSR_BOARD_SD1PWR;
-+#endif
-+	else
-+		mask = BCSR_BOARD_SD0PWR;
-+
-+	bcsr->board &= ~mask;
-+	au_sync_delay(1);
-+}
-+
-+EXPORT_SYMBOL(mmc_card_inserted);
-+EXPORT_SYMBOL(mmc_card_writable);
-+EXPORT_SYMBOL(mmc_power_on);
-+EXPORT_SYMBOL(mmc_power_off);
-+
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1500/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1500/board_setup.c
---- linux-2.4.32-rc1/arch/mips/au1000/pb1500/board_setup.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1500/board_setup.c	2005-03-19 08:17:51.000000000 +0100
-@@ -62,6 +62,10 @@
-     au_writel(0x00000000, 0xAE00001C);
- }
- 
-+void board_power_off (void)
-+{
-+}
-+
- void __init board_setup(void)
- {
- 	u32 pin_func;
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1550/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1550/board_setup.c
---- linux-2.4.32-rc1/arch/mips/au1000/pb1550/board_setup.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1550/board_setup.c	2005-03-19 08:17:51.000000000 +0100
-@@ -48,12 +48,31 @@
- 
- extern struct rtc_ops no_rtc_ops;
- 
-+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
-+extern struct ide_ops *ide_ops;
-+extern struct ide_ops au1xxx_ide_ops;
-+extern u32 au1xxx_ide_virtbase;
-+extern u64 au1xxx_ide_physbase;
-+extern unsigned int au1xxx_ide_irq;
-+
-+u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma
-+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */
-+
- void board_reset (void)
- {
-     /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- 	au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
- }
- 
-+void board_power_off (void)
-+{
-+	/* power off system */
-+	printk("\n** Powering off Pb1550\n");
-+	au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C); 
-+	au_sync();
-+	while(1); /* should not get here */
-+}
-+
- void __init board_setup(void)
- {
- 	u32 pin_func;
-@@ -78,5 +97,36 @@
- 	au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
- 	au_sync();
- 
-+#if defined(CONFIG_AU1XXX_SMC91111)
-+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
-+#error "Resource conflict occured. Disable either Ethernet or IDE daughter card."
-+#else
-+#define CPLD_CONTROL (0xAF00000C)
-+	{
-+	/* set up the Static Bus timing */
-+	/* only 396Mhz */
-+	/* reset the DC */
-+	au_writew(au_readw(CPLD_CONTROL) | 0x0f, CPLD_CONTROL);
-+	au_writel(0x00010003, MEM_STCFG0);
-+	au_writel(0x000c00c0, MEM_STCFG2);
-+	au_writel(0x85E1900D, MEM_STTIME2);
-+	}
-+#endif
-+#endif /* end CONFIG_SMC91111 */
-+
-+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
-+	/*
-+	 * Iniz IDE parameters
-+	 */
-+	ide_ops = &au1xxx_ide_ops;
-+	au1xxx_ide_irq = DAUGHTER_CARD_IRQ;;
-+	au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR;
-+	au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR);
-+	/*
-+	 * change PIO or PIO+Ddma
-+	 * check the GPIO-6 pin condition. pb1550:s15_dot
-+	 */
-+	switch4ddma = (au_readl(SYS_PINSTATERD) & (1 << 6)) ? 1 : 0;
-+#endif
- 	printk("AMD Alchemy Pb1550 Board\n");
- }
-diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1550/irqmap.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1550/irqmap.c
---- linux-2.4.32-rc1/arch/mips/au1000/pb1550/irqmap.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1550/irqmap.c	2005-01-30 09:01:28.000000000 +0100
-@@ -50,6 +50,9 @@
- au1xxx_irq_map_t au1xxx_irq_map[] = {
- 	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
- 	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
-+#ifdef CONFIG_AU1XXX_SMC91111
-+	{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 },
-+#endif
- };
- 
- int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
-diff -Nur linux-2.4.32-rc1/arch/mips/config-shared.in linux-2.4.32-rc1.mips/arch/mips/config-shared.in
---- linux-2.4.32-rc1/arch/mips/config-shared.in	2005-01-19 15:09:27.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/config-shared.in	2005-01-30 09:01:26.000000000 +0100
-@@ -21,16 +21,19 @@
- comment 'Machine selection'
- dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL
- dep_bool 'Support for Alchemy Bosporus board' CONFIG_MIPS_BOSPORUS $CONFIG_MIPS32
-+dep_bool 'Support for FIC Multimedia Player board' CONFIG_MIPS_FICMMP $CONFIG_MIPS32
- dep_bool 'Support for Alchemy Mirage board' CONFIG_MIPS_MIRAGE $CONFIG_MIPS32
- dep_bool 'Support for Alchemy Db1000 board' CONFIG_MIPS_DB1000 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy Db1100 board' CONFIG_MIPS_DB1100 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy Db1500 board' CONFIG_MIPS_DB1500 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy Db1550 board' CONFIG_MIPS_DB1550 $CONFIG_MIPS32
-+dep_bool 'Support for Alchemy Db1200 board' CONFIG_MIPS_DB1200 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy PB1000 board' CONFIG_MIPS_PB1000 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy PB1100 board' CONFIG_MIPS_PB1100 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32
--dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32
-+dep_bool 'Support for Alchemy PB1200 board' CONFIG_MIPS_PB1200 $CONFIG_MIPS32
-+dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32
- dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32
- dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32
- dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32
-@@ -249,6 +252,12 @@
-    define_bool CONFIG_PC_KEYB y
-    define_bool CONFIG_NONCOHERENT_IO y
- fi
-+if [ "$CONFIG_MIPS_FICMMP" = "y" ]; then
-+   define_bool CONFIG_SOC_AU1X00 y
-+   define_bool CONFIG_SOC_AU1200 y
-+   define_bool CONFIG_NONCOHERENT_IO y
-+   define_bool CONFIG_PC_KEYB y
-+fi
- if [ "$CONFIG_MIPS_BOSPORUS" = "y" ]; then
-    define_bool CONFIG_SOC_AU1X00 y
-    define_bool CONFIG_SOC_AU1500 y
-@@ -263,6 +272,12 @@
-    define_bool CONFIG_SWAP_IO_SPACE_W y
-    define_bool CONFIG_SWAP_IO_SPACE_L y
- fi
-+if [ "$CONFIG_MIPS_PB1500" = "y" ]; then
-+   define_bool CONFIG_SOC_AU1X00 y
-+   define_bool CONFIG_SOC_AU1500 y
-+   define_bool CONFIG_NONCOHERENT_IO y
-+   define_bool CONFIG_PC_KEYB y
-+fi
- if [ "$CONFIG_MIPS_PB1100" = "y" ]; then
-    define_bool CONFIG_SOC_AU1X00 y
-    define_bool CONFIG_SOC_AU1100 y
-@@ -271,9 +286,15 @@
-    define_bool CONFIG_SWAP_IO_SPACE_W y
-    define_bool CONFIG_SWAP_IO_SPACE_L y
- fi
--if [ "$CONFIG_MIPS_PB1500" = "y" ]; then
-+if [ "$CONFIG_MIPS_PB1550" = "y" ]; then
-    define_bool CONFIG_SOC_AU1X00 y
--   define_bool CONFIG_SOC_AU1500 y
-+   define_bool CONFIG_SOC_AU1550 y
-+   define_bool CONFIG_NONCOHERENT_IO n
-+   define_bool CONFIG_PC_KEYB y
-+fi
-+if [ "$CONFIG_MIPS_PB1200" = "y" ]; then
-+   define_bool CONFIG_SOC_AU1X00 y
-+   define_bool CONFIG_SOC_AU1200 y
-    define_bool CONFIG_NONCOHERENT_IO y
-    define_bool CONFIG_PC_KEYB y
- fi
-@@ -290,18 +311,24 @@
-    define_bool CONFIG_NONCOHERENT_IO y
-    define_bool CONFIG_PC_KEYB y
- fi
-+if [ "$CONFIG_MIPS_DB1100" = "y" ]; then
-+   define_bool CONFIG_SOC_AU1X00 y
-+   define_bool CONFIG_SOC_AU1100 y
-+   define_bool CONFIG_NONCOHERENT_IO y
-+   define_bool CONFIG_PC_KEYB y
-+   define_bool CONFIG_SWAP_IO_SPACE y
-+fi
- if [ "$CONFIG_MIPS_DB1550" = "y" ]; then
-    define_bool CONFIG_SOC_AU1X00 y
-    define_bool CONFIG_SOC_AU1550 y
-    define_bool CONFIG_NONCOHERENT_IO y
-    define_bool CONFIG_PC_KEYB y
- fi
--if [ "$CONFIG_MIPS_DB1100" = "y" ]; then
-+if [ "$CONFIG_MIPS_DB1200" = "y" ]; then
-    define_bool CONFIG_SOC_AU1X00 y
--   define_bool CONFIG_SOC_AU1100 y
-+   define_bool CONFIG_SOC_AU1200 y
-    define_bool CONFIG_NONCOHERENT_IO y
-    define_bool CONFIG_PC_KEYB y
--   define_bool CONFIG_SWAP_IO_SPACE y
- fi
- if [ "$CONFIG_MIPS_HYDROGEN3" = "y" ]; then
-    define_bool CONFIG_SOC_AU1X00 y
-@@ -327,12 +354,6 @@
-    define_bool CONFIG_NONCOHERENT_IO y
-    define_bool CONFIG_PC_KEYB y
- fi
--if [ "$CONFIG_MIPS_PB1550" = "y" ]; then
--   define_bool CONFIG_SOC_AU1X00 y
--   define_bool CONFIG_SOC_AU1550 y
--   define_bool CONFIG_NONCOHERENT_IO n
--   define_bool CONFIG_PC_KEYB y
--fi
- if [ "$CONFIG_MIPS_COBALT" = "y" ]; then
-    define_bool CONFIG_BOOT_ELF32 y
-    define_bool CONFIG_COBALT_LCD y
-@@ -729,6 +750,13 @@
-      "$CONFIG_MIPS_PB1000" = "y" -o \
-      "$CONFIG_MIPS_PB1100" = "y" -o \
-      "$CONFIG_MIPS_PB1500" = "y" -o \
-+     "$CONFIG_MIPS_PB1550" = "y" -o \
-+     "$CONFIG_MIPS_PB1200" = "y" -o \
-+     "$CONFIG_MIPS_DB1000" = "y" -o \
-+     "$CONFIG_MIPS_DB1100" = "y" -o \
-+     "$CONFIG_MIPS_DB1500" = "y" -o \
-+     "$CONFIG_MIPS_DB1550" = "y" -o \
-+     "$CONFIG_MIPS_DB1200" = "y" -o \
-      "$CONFIG_NEC_OSPREY" = "y" -o \
-      "$CONFIG_NEC_EAGLE" = "y" -o \
-      "$CONFIG_NINO" = "y" -o \
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig linux-2.4.32-rc1.mips/arch/mips/defconfig
---- linux-2.4.32-rc1/arch/mips/defconfig	2005-01-19 15:09:27.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -235,11 +235,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -319,9 +314,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -465,7 +462,6 @@
- # CONFIG_SERIAL is not set
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-atlas linux-2.4.32-rc1.mips/arch/mips/defconfig-atlas
---- linux-2.4.32-rc1/arch/mips/defconfig-atlas	2005-01-19 15:09:27.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-atlas	2005-03-18 13:13:21.000000000 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -235,11 +235,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -317,9 +312,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -528,7 +525,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-bosporus linux-2.4.32-rc1.mips/arch/mips/defconfig-bosporus
---- linux-2.4.32-rc1/arch/mips/defconfig-bosporus	2005-01-19 15:09:27.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-bosporus	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -208,9 +208,7 @@
- CONFIG_MTD_BOSPORUS=y
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -229,7 +227,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -373,11 +370,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -457,9 +449,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -681,7 +675,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-capcella linux-2.4.32-rc1.mips/arch/mips/defconfig-capcella
---- linux-2.4.32-rc1/arch/mips/defconfig-capcella	2005-01-19 15:09:27.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-capcella	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -228,11 +228,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -472,7 +467,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-cobalt linux-2.4.32-rc1.mips/arch/mips/defconfig-cobalt
---- linux-2.4.32-rc1/arch/mips/defconfig-cobalt	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-cobalt	2005-03-18 13:13:21.000000000 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -222,11 +222,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -505,7 +500,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=16
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-csb250 linux-2.4.32-rc1.mips/arch/mips/defconfig-csb250
---- linux-2.4.32-rc1/arch/mips/defconfig-csb250	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-csb250	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- CONFIG_COGENT_CSB250=y
-@@ -268,11 +268,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -556,7 +551,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-db1000 linux-2.4.32-rc1.mips/arch/mips/defconfig-db1000
---- linux-2.4.32-rc1/arch/mips/defconfig-db1000	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-db1000	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -214,11 +214,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--CONFIG_MTD_DB1X00=y
--CONFIG_MTD_DB1X00_BOOT=y
--CONFIG_MTD_DB1X00_USER=y
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -237,7 +233,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -342,11 +337,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -636,7 +626,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-db1100 linux-2.4.32-rc1.mips/arch/mips/defconfig-db1100
---- linux-2.4.32-rc1/arch/mips/defconfig-db1100	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-db1100	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -214,11 +214,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--CONFIG_MTD_DB1X00=y
--# CONFIG_MTD_DB1X00_BOOT is not set
--CONFIG_MTD_DB1X00_USER=y
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -237,7 +233,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -342,11 +337,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -636,7 +626,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-@@ -884,6 +873,7 @@
- # CONFIG_FB_PM2 is not set
- # CONFIG_FB_PM3 is not set
- # CONFIG_FB_CYBER2000 is not set
-+CONFIG_FB_AU1100=y
- # CONFIG_FB_MATROX is not set
- # CONFIG_FB_ATY is not set
- # CONFIG_FB_RADEON is not set
-@@ -895,7 +885,6 @@
- # CONFIG_FB_VOODOO1 is not set
- # CONFIG_FB_TRIDENT is not set
- # CONFIG_FB_E1356 is not set
--CONFIG_FB_AU1100=y
- # CONFIG_FB_IT8181 is not set
- # CONFIG_FB_VIRTUAL is not set
- CONFIG_FBCON_ADVANCED=y
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-db1200 linux-2.4.32-rc1.mips/arch/mips/defconfig-db1200
---- linux-2.4.32-rc1/arch/mips/defconfig-db1200	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-db1200	2005-03-18 13:13:21.000000000 +0100
-@@ -0,0 +1,1032 @@
-+#
-+# Automatically generated make config: don't edit
-+#
-+CONFIG_MIPS=y
-+CONFIG_MIPS32=y
-+# CONFIG_MIPS64 is not set
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+# CONFIG_MODVERSIONS is not set
-+CONFIG_KMOD=y
-+
-+#
-+# Machine selection
-+#
-+# CONFIG_ACER_PICA_61 is not set
-+# CONFIG_MIPS_BOSPORUS is not set
-+# CONFIG_MIPS_MIRAGE is not set
-+# CONFIG_MIPS_DB1000 is not set
-+# CONFIG_MIPS_DB1100 is not set
-+# CONFIG_MIPS_DB1500 is not set
-+# CONFIG_MIPS_DB1550 is not set
-+# CONFIG_MIPS_PB1000 is not set
-+# CONFIG_MIPS_PB1100 is not set
-+# CONFIG_MIPS_PB1500 is not set
-+# CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
-+# CONFIG_MIPS_XXS1500 is not set
-+# CONFIG_MIPS_MTX1 is not set
-+# CONFIG_COGENT_CSB250 is not set
-+# CONFIG_BAGET_MIPS is not set
-+# CONFIG_CASIO_E55 is not set
-+# CONFIG_MIPS_COBALT is not set
-+# CONFIG_DECSTATION is not set
-+# CONFIG_MIPS_EV64120 is not set
-+# CONFIG_MIPS_EV96100 is not set
-+# CONFIG_MIPS_IVR is not set
-+# CONFIG_HP_LASERJET is not set
-+# CONFIG_IBM_WORKPAD is not set
-+# CONFIG_LASAT is not set
-+# CONFIG_MIPS_ITE8172 is not set
-+# CONFIG_MIPS_ATLAS is not set
-+# CONFIG_MIPS_MAGNUM_4000 is not set
-+# CONFIG_MIPS_MALTA is not set
-+# CONFIG_MIPS_SEAD is not set
-+# CONFIG_MOMENCO_OCELOT is not set
-+# CONFIG_MOMENCO_OCELOT_G is not set
-+# CONFIG_MOMENCO_OCELOT_C is not set
-+# CONFIG_MOMENCO_JAGUAR_ATX is not set
-+# CONFIG_PMC_BIG_SUR is not set
-+# CONFIG_PMC_STRETCH is not set
-+# CONFIG_PMC_YOSEMITE is not set
-+# CONFIG_DDB5074 is not set
-+# CONFIG_DDB5476 is not set
-+# CONFIG_DDB5477 is not set
-+# CONFIG_NEC_OSPREY is not set
-+# CONFIG_NEC_EAGLE is not set
-+# CONFIG_OLIVETTI_M700 is not set
-+# CONFIG_NINO is not set
-+# CONFIG_SGI_IP22 is not set
-+# CONFIG_SGI_IP27 is not set
-+# CONFIG_SIBYTE_SB1xxx_SOC is not set
-+# CONFIG_SNI_RM200_PCI is not set
-+# CONFIG_TANBAC_TB0226 is not set
-+# CONFIG_TANBAC_TB0229 is not set
-+# CONFIG_TOSHIBA_JMR3927 is not set
-+# CONFIG_TOSHIBA_RBTX4927 is not set
-+# CONFIG_VICTOR_MPC30X is not set
-+# CONFIG_ZAO_CAPCELLA is not set
-+# CONFIG_HIGHMEM is not set
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+# CONFIG_MIPS_AU1000 is not set
-+
-+#
-+# CPU selection
-+#
-+CONFIG_CPU_MIPS32=y
-+# CONFIG_CPU_MIPS64 is not set
-+# CONFIG_CPU_R3000 is not set
-+# CONFIG_CPU_TX39XX is not set
-+# CONFIG_CPU_VR41XX is not set
-+# CONFIG_CPU_R4300 is not set
-+# CONFIG_CPU_R4X00 is not set
-+# CONFIG_CPU_TX49XX is not set
-+# CONFIG_CPU_R5000 is not set
-+# CONFIG_CPU_R5432 is not set
-+# CONFIG_CPU_R6000 is not set
-+# CONFIG_CPU_NEVADA is not set
-+# CONFIG_CPU_R8000 is not set
-+# CONFIG_CPU_R10000 is not set
-+# CONFIG_CPU_RM7000 is not set
-+# CONFIG_CPU_RM9000 is not set
-+# CONFIG_CPU_SB1 is not set
-+CONFIG_PAGE_SIZE_4KB=y
-+# CONFIG_PAGE_SIZE_16KB is not set
-+# CONFIG_PAGE_SIZE_64KB is not set
-+CONFIG_CPU_HAS_PREFETCH=y
-+# CONFIG_VTAG_ICACHE is not set
-+CONFIG_64BIT_PHYS_ADDR=y
-+# CONFIG_CPU_ADVANCED is not set
-+CONFIG_CPU_HAS_LLSC=y
-+# CONFIG_CPU_HAS_LLDSCD is not set
-+# CONFIG_CPU_HAS_WB is not set
-+CONFIG_CPU_HAS_SYNC=y
-+
-+#
-+# General setup
-+#
-+CONFIG_CPU_LITTLE_ENDIAN=y
-+# CONFIG_BUILD_ELF64 is not set
-+CONFIG_NET=y
-+CONFIG_PCI=y
-+CONFIG_PCI_NEW=y
-+CONFIG_PCI_AUTO=y
-+# CONFIG_PCI_NAMES is not set
-+# CONFIG_ISA is not set
-+# CONFIG_TC is not set
-+# CONFIG_MCA is not set
-+# CONFIG_SBUS is not set
-+CONFIG_HOTPLUG=y
-+
-+#
-+# PCMCIA/CardBus support
-+#
-+CONFIG_PCMCIA=m
-+# CONFIG_CARDBUS is not set
-+# CONFIG_TCIC is not set
-+# CONFIG_I82092 is not set
-+# CONFIG_I82365 is not set
-+
-+#
-+# PCI Hotplug Support
-+#
-+# CONFIG_HOTPLUG_PCI is not set
-+# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-+# CONFIG_HOTPLUG_PCI_SHPC is not set
-+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
-+# CONFIG_HOTPLUG_PCI_PCIE is not set
-+# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
-+CONFIG_SYSVIPC=y
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+CONFIG_SYSCTL=y
-+CONFIG_KCORE_ELF=y
-+# CONFIG_KCORE_AOUT is not set
-+# CONFIG_BINFMT_AOUT is not set
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_MIPS32_COMPAT is not set
-+# CONFIG_MIPS32_O32 is not set
-+# CONFIG_MIPS32_N32 is not set
-+# CONFIG_BINFMT_ELF32 is not set
-+# CONFIG_BINFMT_MISC is not set
-+# CONFIG_OOM_KILLER is not set
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="mem=96M"
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+# CONFIG_MTD is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play configuration
-+#
-+# CONFIG_PNP is not set
-+# CONFIG_ISAPNP is not set
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_FD is not set
-+# CONFIG_BLK_DEV_XD is not set
-+# CONFIG_PARIDE is not set
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_CISS_SCSI_TAPE is not set
-+# CONFIG_CISS_MONITOR_THREAD is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_SX8 is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_RAM is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+# CONFIG_BLK_STATS is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+# CONFIG_BLK_DEV_MD is not set
-+# CONFIG_MD_LINEAR is not set
-+# CONFIG_MD_RAID0 is not set
-+# CONFIG_MD_RAID1 is not set
-+# CONFIG_MD_RAID5 is not set
-+# CONFIG_MD_MULTIPATH is not set
-+# CONFIG_BLK_DEV_LVM is not set
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+# CONFIG_NETLINK_DEV is not set
-+CONFIG_NETFILTER=y
-+# CONFIG_NETFILTER_DEBUG is not set
-+CONFIG_FILTER=y
-+CONFIG_UNIX=y
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+CONFIG_IP_PNP_BOOTP=y
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_INET_ECN is not set
-+# CONFIG_SYN_COOKIES is not set
-+
-+#
-+#   IP: Netfilter Configuration
-+#
-+# CONFIG_IP_NF_CONNTRACK is not set
-+# CONFIG_IP_NF_QUEUE is not set
-+# CONFIG_IP_NF_IPTABLES is not set
-+# CONFIG_IP_NF_ARPTABLES is not set
-+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-+# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-+
-+#
-+#   IP: Virtual Server Configuration
-+#
-+# CONFIG_IP_VS is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_KHTTPD is not set
-+
-+#
-+#    SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_ATM is not set
-+# CONFIG_VLAN_8021Q is not set
-+
-+#
-+#  
-+#
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_LLC is not set
-+# CONFIG_NET_DIVERT is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_FASTROUTE is not set
-+# CONFIG_NET_HW_FLOWCONTROL is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+
-+#
-+# Telephony Support
-+#
-+# CONFIG_PHONE is not set
-+# CONFIG_PHONE_IXJ is not set
-+# CONFIG_PHONE_IXJ_PCMCIA is not set
-+
-+#
-+# ATA/IDE/MFM/RLL support
-+#
-+CONFIG_IDE=y
-+
-+#
-+# IDE, ATA and ATAPI Block devices
-+#
-+CONFIG_BLK_DEV_IDE=y
-+
-+#
-+# Please see Documentation/ide.txt for help/info on IDE drives
-+#
-+# CONFIG_BLK_DEV_HD_IDE is not set
-+# CONFIG_BLK_DEV_HD is not set
-+# CONFIG_BLK_DEV_IDE_SATA is not set
-+CONFIG_BLK_DEV_IDEDISK=y
-+CONFIG_IDEDISK_MULTI_MODE=y
-+CONFIG_IDEDISK_STROKE=y
-+CONFIG_BLK_DEV_IDECS=m
-+# CONFIG_BLK_DEV_DELKIN is not set
-+# CONFIG_BLK_DEV_IDECD is not set
-+# CONFIG_BLK_DEV_IDETAPE is not set
-+# CONFIG_BLK_DEV_IDEFLOPPY is not set
-+# CONFIG_BLK_DEV_IDESCSI is not set
-+# CONFIG_IDE_TASK_IOCTL is not set
-+
-+#
-+# IDE chipset support/bugfixes
-+#
-+# CONFIG_BLK_DEV_CMD640 is not set
-+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-+# CONFIG_BLK_DEV_ISAPNP is not set
-+# CONFIG_BLK_DEV_IDEPCI is not set
-+# CONFIG_IDE_CHIPSETS is not set
-+# CONFIG_IDEDMA_AUTO is not set
-+# CONFIG_DMA_NONPCI is not set
-+# CONFIG_BLK_DEV_ATARAID is not set
-+# CONFIG_BLK_DEV_ATARAID_PDC is not set
-+# CONFIG_BLK_DEV_ATARAID_HPT is not set
-+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-+# CONFIG_BLK_DEV_ATARAID_SII is not set
-+
-+#
-+# SCSI support
-+#
-+CONFIG_SCSI=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+CONFIG_SD_EXTRA_DEVS=40
-+CONFIG_CHR_DEV_ST=y
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=y
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+CONFIG_SR_EXTRA_DEVS=2
-+# CONFIG_CHR_DEV_SG is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_DEBUG_QUEUES is not set
-+# CONFIG_SCSI_MULTI_LUN is not set
-+CONFIG_SCSI_CONSTANTS=y
-+# CONFIG_SCSI_LOGGING is not set
-+
-+#
-+# SCSI low-level drivers
-+#
-+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-+# CONFIG_SCSI_7000FASST is not set
-+# CONFIG_SCSI_ACARD is not set
-+# CONFIG_SCSI_AHA152X is not set
-+# CONFIG_SCSI_AHA1542 is not set
-+# CONFIG_SCSI_AHA1740 is not set
-+# CONFIG_SCSI_AACRAID is not set
-+# CONFIG_SCSI_AIC7XXX is not set
-+# CONFIG_SCSI_AIC79XX is not set
-+# CONFIG_SCSI_AIC7XXX_OLD is not set
-+# CONFIG_SCSI_DPT_I2O is not set
-+# CONFIG_SCSI_ADVANSYS is not set
-+# CONFIG_SCSI_IN2000 is not set
-+# CONFIG_SCSI_AM53C974 is not set
-+# CONFIG_SCSI_MEGARAID is not set
-+# CONFIG_SCSI_MEGARAID2 is not set
-+# CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
-+# CONFIG_SCSI_SATA_SVW is not set
-+# CONFIG_SCSI_ATA_PIIX is not set
-+# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
-+# CONFIG_SCSI_SATA_PROMISE is not set
-+# CONFIG_SCSI_SATA_SX4 is not set
-+# CONFIG_SCSI_SATA_SIL is not set
-+# CONFIG_SCSI_SATA_SIS is not set
-+# CONFIG_SCSI_SATA_ULI is not set
-+# CONFIG_SCSI_SATA_VIA is not set
-+# CONFIG_SCSI_SATA_VITESSE is not set
-+# CONFIG_SCSI_BUSLOGIC is not set
-+# CONFIG_SCSI_CPQFCTS is not set
-+# CONFIG_SCSI_DMX3191D is not set
-+# CONFIG_SCSI_DTC3280 is not set
-+# CONFIG_SCSI_EATA is not set
-+# CONFIG_SCSI_EATA_DMA is not set
-+# CONFIG_SCSI_EATA_PIO is not set
-+# CONFIG_SCSI_FUTURE_DOMAIN is not set
-+# CONFIG_SCSI_GDTH is not set
-+# CONFIG_SCSI_GENERIC_NCR5380 is not set
-+# CONFIG_SCSI_INITIO is not set
-+# CONFIG_SCSI_INIA100 is not set
-+# CONFIG_SCSI_NCR53C406A is not set
-+# CONFIG_SCSI_NCR53C7xx is not set
-+# CONFIG_SCSI_SYM53C8XX_2 is not set
-+# CONFIG_SCSI_NCR53C8XX is not set
-+# CONFIG_SCSI_SYM53C8XX is not set
-+# CONFIG_SCSI_PAS16 is not set
-+# CONFIG_SCSI_PCI2000 is not set
-+# CONFIG_SCSI_PCI2220I is not set
-+# CONFIG_SCSI_PSI240I is not set
-+# CONFIG_SCSI_QLOGIC_FAS is not set
-+# CONFIG_SCSI_QLOGIC_ISP is not set
-+# CONFIG_SCSI_QLOGIC_FC is not set
-+# CONFIG_SCSI_QLOGIC_1280 is not set
-+# CONFIG_SCSI_SIM710 is not set
-+# CONFIG_SCSI_SYM53C416 is not set
-+# CONFIG_SCSI_DC390T is not set
-+# CONFIG_SCSI_T128 is not set
-+# CONFIG_SCSI_U14_34F is not set
-+# CONFIG_SCSI_NSP32 is not set
-+# CONFIG_SCSI_DEBUG is not set
-+
-+#
-+# PCMCIA SCSI adapter support
-+#
-+# CONFIG_SCSI_PCMCIA is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+# CONFIG_FUSION_BOOT is not set
-+# CONFIG_FUSION_ISENSE is not set
-+# CONFIG_FUSION_CTL is not set
-+# CONFIG_FUSION_LAN is not set
-+
-+#
-+# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-+#
-+# CONFIG_IEEE1394 is not set
-+
-+#
-+# I2O device support
-+#
-+# CONFIG_I2O is not set
-+# CONFIG_I2O_PCI is not set
-+# CONFIG_I2O_BLOCK is not set
-+# CONFIG_I2O_LAN is not set
-+# CONFIG_I2O_SCSI is not set
-+# CONFIG_I2O_PROC is not set
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+
-+#
-+# ARCnet devices
-+#
-+# CONFIG_ARCNET is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_ETHERTAP is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_SUNLANCE is not set
-+# CONFIG_HAPPYMEAL is not set
-+# CONFIG_SUNBMAC is not set
-+# CONFIG_SUNQE is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_LANCE is not set
-+# CONFIG_NET_VENDOR_SMC is not set
-+# CONFIG_NET_VENDOR_RACAL is not set
-+# CONFIG_HP100 is not set
-+# CONFIG_NET_ISA is not set
-+# CONFIG_NET_PCI is not set
-+# CONFIG_NET_POCKET is not set
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+# CONFIG_ACENIC is not set
-+# CONFIG_DL2K is not set
-+# CONFIG_E1000 is not set
-+# CONFIG_MYRI_SBUS is not set
-+# CONFIG_NS83820 is not set
-+# CONFIG_HAMACHI is not set
-+# CONFIG_YELLOWFIN is not set
-+# CONFIG_R8169 is not set
-+# CONFIG_SK98LIN is not set
-+# CONFIG_TIGON3 is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+# CONFIG_PLIP is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+# CONFIG_NET_RADIO is not set
-+
-+#
-+# Token Ring devices
-+#
-+# CONFIG_TR is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_RCPCI is not set
-+# CONFIG_SHAPER is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+
-+#
-+# PCMCIA network device support
-+#
-+# CONFIG_NET_PCMCIA is not set
-+
-+#
-+# Amateur Radio support
-+#
-+# CONFIG_HAMRADIO is not set
-+
-+#
-+# IrDA (infrared) support
-+#
-+# CONFIG_IRDA is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input core support
-+#
-+CONFIG_INPUT=y
-+CONFIG_INPUT_KEYBDEV=y
-+CONFIG_INPUT_MOUSEDEV=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_UINPUT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+# CONFIG_VT_CONSOLE is not set
-+# CONFIG_SERIAL is not set
-+# CONFIG_SERIAL_EXTENDED is not set
-+CONFIG_SERIAL_NONSTANDARD=y
-+# CONFIG_COMPUTONE is not set
-+# CONFIG_ROCKETPORT is not set
-+# CONFIG_CYCLADES is not set
-+# CONFIG_DIGIEPCA is not set
-+# CONFIG_DIGI is not set
-+# CONFIG_ESPSERIAL is not set
-+# CONFIG_MOXA_INTELLIO is not set
-+# CONFIG_MOXA_SMARTIO is not set
-+# CONFIG_ISI is not set
-+# CONFIG_SYNCLINK is not set
-+# CONFIG_SYNCLINKMP is not set
-+# CONFIG_N_HDLC is not set
-+# CONFIG_RISCOM8 is not set
-+# CONFIG_SPECIALIX is not set
-+# CONFIG_SX is not set
-+# CONFIG_RIO is not set
-+# CONFIG_STALDRV is not set
-+# CONFIG_SERIAL_TX3912 is not set
-+# CONFIG_SERIAL_TX3912_CONSOLE is not set
-+# CONFIG_SERIAL_TXX9 is not set
-+# CONFIG_SERIAL_TXX9_CONSOLE is not set
-+# CONFIG_TXX927_SERIAL is not set
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_UNIX98_PTY_COUNT=256
-+
-+#
-+# I2C support
-+#
-+# CONFIG_I2C is not set
-+
-+#
-+# Mice
-+#
-+# CONFIG_BUSMOUSE is not set
-+# CONFIG_MOUSE is not set
-+
-+#
-+# Joysticks
-+#
-+# CONFIG_INPUT_GAMEPORT is not set
-+# CONFIG_INPUT_NS558 is not set
-+# CONFIG_INPUT_LIGHTNING is not set
-+# CONFIG_INPUT_PCIGAME is not set
-+# CONFIG_INPUT_CS461X is not set
-+# CONFIG_INPUT_EMU10K1 is not set
-+# CONFIG_INPUT_SERIO is not set
-+# CONFIG_INPUT_SERPORT is not set
-+
-+#
-+# Joysticks
-+#
-+# CONFIG_INPUT_ANALOG is not set
-+# CONFIG_INPUT_A3D is not set
-+# CONFIG_INPUT_ADI is not set
-+# CONFIG_INPUT_COBRA is not set
-+# CONFIG_INPUT_GF2K is not set
-+# CONFIG_INPUT_GRIP is not set
-+# CONFIG_INPUT_INTERACT is not set
-+# CONFIG_INPUT_TMDC is not set
-+# CONFIG_INPUT_SIDEWINDER is not set
-+# CONFIG_INPUT_IFORCE_USB is not set
-+# CONFIG_INPUT_IFORCE_232 is not set
-+# CONFIG_INPUT_WARRIOR is not set
-+# CONFIG_INPUT_MAGELLAN is not set
-+# CONFIG_INPUT_SPACEORB is not set
-+# CONFIG_INPUT_SPACEBALL is not set
-+# CONFIG_INPUT_STINGER is not set
-+# CONFIG_INPUT_DB9 is not set
-+# CONFIG_INPUT_GAMECON is not set
-+# CONFIG_INPUT_TURBOGRAFX is not set
-+# CONFIG_QIC02_TAPE is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_IPMI_PANIC_EVENT is not set
-+# CONFIG_IPMI_DEVICE_INTERFACE is not set
-+# CONFIG_IPMI_KCS is not set
-+# CONFIG_IPMI_WATCHDOG is not set
-+
-+#
-+# Watchdog Cards
-+#
-+# CONFIG_WATCHDOG is not set
-+# CONFIG_SCx200 is not set
-+# CONFIG_SCx200_GPIO is not set
-+# CONFIG_AMD_PM768 is not set
-+# CONFIG_NVRAM is not set
-+# CONFIG_RTC is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+
-+#
-+# Ftape, the floppy tape device driver
-+#
-+# CONFIG_FTAPE is not set
-+# CONFIG_AGP is not set
-+
-+#
-+# Direct Rendering Manager (XFree86 DRI support)
-+#
-+# CONFIG_DRM is not set
-+
-+#
-+# PCMCIA character devices
-+#
-+# CONFIG_PCMCIA_SERIAL_CS is not set
-+# CONFIG_SYNCLINK_CS is not set
-+
-+#
-+# File systems
-+#
-+# CONFIG_QUOTA is not set
-+# CONFIG_QFMT_V2 is not set
-+CONFIG_AUTOFS_FS=y
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_REISERFS_CHECK is not set
-+# CONFIG_REISERFS_PROC_INFO is not set
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_ADFS_FS_RW is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BEFS_DEBUG is not set
-+# CONFIG_BFS_FS is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+# CONFIG_UMSDOS_FS is not set
-+CONFIG_VFAT_FS=y
-+# CONFIG_EFS_FS is not set
-+# CONFIG_JFFS_FS is not set
-+# CONFIG_JFFS2_FS is not set
-+# CONFIG_CRAMFS is not set
-+CONFIG_TMPFS=y
-+CONFIG_RAMFS=y
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_JOLIET is not set
-+# CONFIG_ZISOFS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_JFS_DEBUG is not set
-+# CONFIG_JFS_STATISTICS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_NTFS_FS is not set
-+# CONFIG_NTFS_RW is not set
-+# CONFIG_HPFS_FS is not set
-+CONFIG_PROC_FS=y
-+# CONFIG_DEVFS_FS is not set
-+# CONFIG_DEVFS_MOUNT is not set
-+# CONFIG_DEVFS_DEBUG is not set
-+CONFIG_DEVPTS_FS=y
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_QNX4FS_RW is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_EXT2_FS=y
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UDF_FS is not set
-+# CONFIG_UDF_RW is not set
-+# CONFIG_UFS_FS is not set
-+# CONFIG_UFS_FS_WRITE is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_XFS_QUOTA is not set
-+# CONFIG_XFS_RT is not set
-+# CONFIG_XFS_TRACE is not set
-+# CONFIG_XFS_DEBUG is not set
-+
-+#
-+# Network File Systems
-+#
-+# CONFIG_CODA_FS is not set
-+# CONFIG_INTERMEZZO_FS is not set
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_DIRECTIO is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+# CONFIG_NFSD_V3 is not set
-+# CONFIG_NFSD_TCP is not set
-+CONFIG_SUNRPC=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+# CONFIG_SMB_FS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_NCPFS_PACKET_SIGNING is not set
-+# CONFIG_NCPFS_IOCTL_LOCKING is not set
-+# CONFIG_NCPFS_STRONG is not set
-+# CONFIG_NCPFS_NFS_NS is not set
-+# CONFIG_NCPFS_OS2_NS is not set
-+# CONFIG_NCPFS_SMALLDOS is not set
-+# CONFIG_NCPFS_NLS is not set
-+# CONFIG_NCPFS_EXTRAS is not set
-+# CONFIG_ZISOFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_SMB_NLS is not set
-+CONFIG_NLS=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+# CONFIG_NLS_CODEPAGE_437 is not set
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ISO8859_1 is not set
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Console drivers
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+# CONFIG_MDA_CONSOLE is not set
-+
-+#
-+# Frame-buffer support
-+#
-+CONFIG_FB=y
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FB_RIVA is not set
-+# CONFIG_FB_CLGEN is not set
-+# CONFIG_FB_PM2 is not set
-+# CONFIG_FB_PM3 is not set
-+# CONFIG_FB_CYBER2000 is not set
-+# CONFIG_FB_MATROX is not set
-+# CONFIG_FB_ATY is not set
-+# CONFIG_FB_RADEON is not set
-+# CONFIG_FB_ATY128 is not set
-+# CONFIG_FB_INTEL is not set
-+# CONFIG_FB_SIS is not set
-+# CONFIG_FB_NEOMAGIC is not set
-+# CONFIG_FB_3DFX is not set
-+# CONFIG_FB_VOODOO1 is not set
-+# CONFIG_FB_TRIDENT is not set
-+# CONFIG_FB_E1356 is not set
-+# CONFIG_FB_IT8181 is not set
-+# CONFIG_FB_VIRTUAL is not set
-+CONFIG_FBCON_ADVANCED=y
-+# CONFIG_FBCON_MFB is not set
-+# CONFIG_FBCON_CFB2 is not set
-+# CONFIG_FBCON_CFB4 is not set
-+# CONFIG_FBCON_CFB8 is not set
-+CONFIG_FBCON_CFB16=y
-+# CONFIG_FBCON_CFB24 is not set
-+CONFIG_FBCON_CFB32=y
-+# CONFIG_FBCON_AFB is not set
-+# CONFIG_FBCON_ILBM is not set
-+# CONFIG_FBCON_IPLAN2P2 is not set
-+# CONFIG_FBCON_IPLAN2P4 is not set
-+# CONFIG_FBCON_IPLAN2P8 is not set
-+# CONFIG_FBCON_MAC is not set
-+# CONFIG_FBCON_VGA_PLANES is not set
-+# CONFIG_FBCON_VGA is not set
-+# CONFIG_FBCON_HGA is not set
-+# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
-+CONFIG_FBCON_FONTS=y
-+CONFIG_FONT_8x8=y
-+CONFIG_FONT_8x16=y
-+# CONFIG_FONT_SUN8x16 is not set
-+# CONFIG_FONT_SUN12x22 is not set
-+# CONFIG_FONT_6x11 is not set
-+# CONFIG_FONT_PEARL_8x8 is not set
-+# CONFIG_FONT_ACORN_8x8 is not set
-+
-+#
-+# Sound
-+#
-+CONFIG_SOUND=y
-+# CONFIG_SOUND_ALI5455 is not set
-+# CONFIG_SOUND_BT878 is not set
-+# CONFIG_SOUND_CMPCI is not set
-+# CONFIG_SOUND_EMU10K1 is not set
-+# CONFIG_MIDI_EMU10K1 is not set
-+# CONFIG_SOUND_FUSION is not set
-+# CONFIG_SOUND_CS4281 is not set
-+# CONFIG_SOUND_ES1370 is not set
-+# CONFIG_SOUND_ES1371 is not set
-+# CONFIG_SOUND_ESSSOLO1 is not set
-+# CONFIG_SOUND_MAESTRO is not set
-+# CONFIG_SOUND_MAESTRO3 is not set
-+# CONFIG_SOUND_FORTE is not set
-+# CONFIG_SOUND_ICH is not set
-+# CONFIG_SOUND_RME96XX is not set
-+# CONFIG_SOUND_SONICVIBES is not set
-+# CONFIG_SOUND_TRIDENT is not set
-+# CONFIG_SOUND_MSNDCLAS is not set
-+# CONFIG_SOUND_MSNDPIN is not set
-+# CONFIG_SOUND_VIA82CXXX is not set
-+# CONFIG_MIDI_VIA82CXXX is not set
-+# CONFIG_SOUND_OSS is not set
-+# CONFIG_SOUND_TVMIXER is not set
-+# CONFIG_SOUND_AD1980 is not set
-+# CONFIG_SOUND_WM97XX is not set
-+
-+#
-+# USB support
-+#
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_BANDWIDTH is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_EHCI_HCD is not set
-+# CONFIG_USB_UHCI is not set
-+# CONFIG_USB_UHCI_ALT is not set
-+CONFIG_USB_OHCI=y
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_AUDIO is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_BLUETOOTH is not set
-+# CONFIG_USB_MIDI is not set
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_HP8200e is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+
-+#
-+# USB Human Interface Devices (HID)
-+#
-+CONFIG_USB_HID=y
-+CONFIG_USB_HIDINPUT=y
-+CONFIG_USB_HIDDEV=y
-+# CONFIG_USB_AIPTEK is not set
-+# CONFIG_USB_WACOM is not set
-+# CONFIG_USB_KBTAB is not set
-+# CONFIG_USB_POWERMATE is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_DC2XX is not set
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_SCANNER is not set
-+# CONFIG_USB_MICROTEK is not set
-+# CONFIG_USB_HPUSBSCSI is not set
-+
-+#
-+# USB Multimedia devices
-+#
-+
-+#
-+#   Video4Linux support is needed for USB Multimedia device support
-+#
-+
-+#
-+# USB Network adaptors
-+#
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_CDCETHER is not set
-+# CONFIG_USB_USBNET is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_USS720 is not set
-+
-+#
-+# USB Serial Converter support
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_TIGL is not set
-+# CONFIG_USB_BRLVGER is not set
-+# CONFIG_USB_LCD is not set
-+
-+#
-+# Support for USB gadgets
-+#
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# Bluetooth support
-+#
-+# CONFIG_BLUEZ is not set
-+
-+#
-+# Kernel hacking
-+#
-+CONFIG_CROSSCOMPILE=y
-+# CONFIG_RUNTIME_DEBUG is not set
-+# CONFIG_KGDB is not set
-+# CONFIG_GDB_CONSOLE is not set
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_MIPS_UNCACHED is not set
-+CONFIG_LOG_BUF_SHIFT=0
-+
-+#
-+# Cryptographic options
-+#
-+# CONFIG_CRYPTO is not set
-+
-+#
-+# Library routines
-+#
-+# CONFIG_CRC32 is not set
-+CONFIG_ZLIB_INFLATE=m
-+CONFIG_ZLIB_DEFLATE=m
-+# CONFIG_FW_LOADER is not set
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-db1500 linux-2.4.32-rc1.mips/arch/mips/defconfig-db1500
---- linux-2.4.32-rc1/arch/mips/defconfig-db1500	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-db1500	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -267,11 +267,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -555,7 +550,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-db1550 linux-2.4.32-rc1.mips/arch/mips/defconfig-db1550
---- linux-2.4.32-rc1/arch/mips/defconfig-db1550	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-db1550	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -213,11 +213,9 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- CONFIG_MTD_PB1550=y
- CONFIG_MTD_PB1550_BOOT=y
- CONFIG_MTD_PB1550_USER=y
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -236,7 +234,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -343,11 +340,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -633,7 +625,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ddb5476 linux-2.4.32-rc1.mips/arch/mips/defconfig-ddb5476
---- linux-2.4.32-rc1/arch/mips/defconfig-ddb5476	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ddb5476	2005-03-18 13:13:21.000000000 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -226,11 +226,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -517,7 +512,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ddb5477 linux-2.4.32-rc1.mips/arch/mips/defconfig-ddb5477
---- linux-2.4.32-rc1/arch/mips/defconfig-ddb5477	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ddb5477	2005-03-18 13:13:21.000000000 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -226,11 +226,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -434,7 +429,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-decstation linux-2.4.32-rc1.mips/arch/mips/defconfig-decstation
---- linux-2.4.32-rc1/arch/mips/defconfig-decstation	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-decstation	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -223,11 +223,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -306,9 +301,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -477,7 +474,6 @@
- CONFIG_SERIAL_DEC_CONSOLE=y
- CONFIG_DZ=y
- CONFIG_ZS=y
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-e55 linux-2.4.32-rc1.mips/arch/mips/defconfig-e55
---- linux-2.4.32-rc1/arch/mips/defconfig-e55	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-e55	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -222,11 +222,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -426,7 +421,6 @@
- # CONFIG_SERIAL_MULTIPORT is not set
- # CONFIG_HUB6 is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-eagle linux-2.4.32-rc1.mips/arch/mips/defconfig-eagle
---- linux-2.4.32-rc1/arch/mips/defconfig-eagle	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-eagle	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -208,8 +208,8 @@
- # Mapping drivers for chip access
- #
- CONFIG_MTD_PHYSMAP=y
--CONFIG_MTD_PHYSMAP_START=1c000000
--CONFIG_MTD_PHYSMAP_LEN=2000000
-+CONFIG_MTD_PHYSMAP_START=0x1c000000
-+CONFIG_MTD_PHYSMAP_LEN=0x2000000
- CONFIG_MTD_PHYSMAP_BUSWIDTH=4
- # CONFIG_MTD_PB1000 is not set
- # CONFIG_MTD_PB1500 is not set
-@@ -217,9 +217,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -238,7 +236,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -327,11 +324,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -587,7 +579,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ev64120 linux-2.4.32-rc1.mips/arch/mips/defconfig-ev64120
---- linux-2.4.32-rc1/arch/mips/defconfig-ev64120	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ev64120	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -230,11 +230,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -443,7 +438,6 @@
- # CONFIG_SERIAL_CONSOLE is not set
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ev96100 linux-2.4.32-rc1.mips/arch/mips/defconfig-ev96100
---- linux-2.4.32-rc1/arch/mips/defconfig-ev96100	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ev96100	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -232,11 +232,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -441,7 +436,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ficmmp linux-2.4.32-rc1.mips/arch/mips/defconfig-ficmmp
---- linux-2.4.32-rc1/arch/mips/defconfig-ficmmp	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ficmmp	2005-03-18 13:13:21.000000000 +0100
-@@ -0,0 +1,862 @@
-+#
-+# Automatically generated make config: don't edit
-+#
-+CONFIG_MIPS=y
-+CONFIG_MIPS32=y
-+# CONFIG_MIPS64 is not set
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+# CONFIG_MODVERSIONS is not set
-+CONFIG_KMOD=y
-+
-+#
-+# Machine selection
-+#
-+# CONFIG_ACER_PICA_61 is not set
-+# CONFIG_MIPS_BOSPORUS is not set
-+# CONFIG_MIPS_MIRAGE is not set
-+# CONFIG_MIPS_DB1000 is not set
-+# CONFIG_MIPS_DB1100 is not set
-+# CONFIG_MIPS_DB1500 is not set
-+# CONFIG_MIPS_DB1550 is not set
-+# CONFIG_MIPS_PB1000 is not set
-+# CONFIG_MIPS_PB1100 is not set
-+# CONFIG_MIPS_PB1500 is not set
-+# CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
-+# CONFIG_MIPS_XXS1500 is not set
-+# CONFIG_MIPS_MTX1 is not set
-+# CONFIG_COGENT_CSB250 is not set
-+# CONFIG_BAGET_MIPS is not set
-+# CONFIG_CASIO_E55 is not set
-+# CONFIG_MIPS_COBALT is not set
-+# CONFIG_DECSTATION is not set
-+# CONFIG_MIPS_EV64120 is not set
-+# CONFIG_MIPS_EV96100 is not set
-+# CONFIG_MIPS_IVR is not set
-+# CONFIG_HP_LASERJET is not set
-+# CONFIG_IBM_WORKPAD is not set
-+# CONFIG_LASAT is not set
-+# CONFIG_MIPS_ITE8172 is not set
-+# CONFIG_MIPS_ATLAS is not set
-+# CONFIG_MIPS_MAGNUM_4000 is not set
-+# CONFIG_MIPS_MALTA is not set
-+# CONFIG_MIPS_SEAD is not set
-+# CONFIG_MOMENCO_OCELOT is not set
-+# CONFIG_MOMENCO_OCELOT_G is not set
-+# CONFIG_MOMENCO_OCELOT_C is not set
-+# CONFIG_MOMENCO_JAGUAR_ATX is not set
-+# CONFIG_PMC_BIG_SUR is not set
-+# CONFIG_PMC_STRETCH is not set
-+# CONFIG_PMC_YOSEMITE is not set
-+# CONFIG_DDB5074 is not set
-+# CONFIG_DDB5476 is not set
-+# CONFIG_DDB5477 is not set
-+# CONFIG_NEC_OSPREY is not set
-+# CONFIG_NEC_EAGLE is not set
-+# CONFIG_OLIVETTI_M700 is not set
-+# CONFIG_NINO is not set
-+# CONFIG_SGI_IP22 is not set
-+# CONFIG_SGI_IP27 is not set
-+# CONFIG_SIBYTE_SB1xxx_SOC is not set
-+# CONFIG_SNI_RM200_PCI is not set
-+# CONFIG_TANBAC_TB0226 is not set
-+# CONFIG_TANBAC_TB0229 is not set
-+# CONFIG_TOSHIBA_JMR3927 is not set
-+# CONFIG_TOSHIBA_RBTX4927 is not set
-+# CONFIG_VICTOR_MPC30X is not set
-+# CONFIG_ZAO_CAPCELLA is not set
-+# CONFIG_HIGHMEM is not set
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+# CONFIG_MIPS_AU1000 is not set
-+
-+#
-+# CPU selection
-+#
-+CONFIG_CPU_MIPS32=y
-+# CONFIG_CPU_MIPS64 is not set
-+# CONFIG_CPU_R3000 is not set
-+# CONFIG_CPU_TX39XX is not set
-+# CONFIG_CPU_VR41XX is not set
-+# CONFIG_CPU_R4300 is not set
-+# CONFIG_CPU_R4X00 is not set
-+# CONFIG_CPU_TX49XX is not set
-+# CONFIG_CPU_R5000 is not set
-+# CONFIG_CPU_R5432 is not set
-+# CONFIG_CPU_R6000 is not set
-+# CONFIG_CPU_NEVADA is not set
-+# CONFIG_CPU_R8000 is not set
-+# CONFIG_CPU_R10000 is not set
-+# CONFIG_CPU_RM7000 is not set
-+# CONFIG_CPU_RM9000 is not set
-+# CONFIG_CPU_SB1 is not set
-+CONFIG_PAGE_SIZE_4KB=y
-+# CONFIG_PAGE_SIZE_16KB is not set
-+# CONFIG_PAGE_SIZE_64KB is not set
-+CONFIG_CPU_HAS_PREFETCH=y
-+# CONFIG_VTAG_ICACHE is not set
-+CONFIG_64BIT_PHYS_ADDR=y
-+# CONFIG_CPU_ADVANCED is not set
-+CONFIG_CPU_HAS_LLSC=y
-+# CONFIG_CPU_HAS_LLDSCD is not set
-+# CONFIG_CPU_HAS_WB is not set
-+CONFIG_CPU_HAS_SYNC=y
-+
-+#
-+# General setup
-+#
-+CONFIG_CPU_LITTLE_ENDIAN=y
-+# CONFIG_BUILD_ELF64 is not set
-+CONFIG_NET=y
-+# CONFIG_PCI is not set
-+# CONFIG_PCI_NEW is not set
-+CONFIG_PCI_AUTO=y
-+# CONFIG_ISA is not set
-+# CONFIG_TC is not set
-+# CONFIG_MCA is not set
-+# CONFIG_SBUS is not set
-+# CONFIG_HOTPLUG is not set
-+# CONFIG_PCMCIA is not set
-+# CONFIG_HOTPLUG_PCI is not set
-+CONFIG_SYSVIPC=y
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+CONFIG_SYSCTL=y
-+CONFIG_KCORE_ELF=y
-+# CONFIG_KCORE_AOUT is not set
-+# CONFIG_BINFMT_AOUT is not set
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_MIPS32_COMPAT is not set
-+# CONFIG_MIPS32_O32 is not set
-+# CONFIG_MIPS32_N32 is not set
-+# CONFIG_BINFMT_ELF32 is not set
-+# CONFIG_BINFMT_MISC is not set
-+# CONFIG_OOM_KILLER is not set
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="ide3=dma mem=96M root=/dev/hda2 rootflags=data=journal"
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+# CONFIG_MTD is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play configuration
-+#
-+# CONFIG_PNP is not set
-+# CONFIG_ISAPNP is not set
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_FD is not set
-+# CONFIG_BLK_DEV_XD is not set
-+# CONFIG_PARIDE is not set
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_CISS_SCSI_TAPE is not set
-+# CONFIG_CISS_MONITOR_THREAD is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_SX8 is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_RAM is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+# CONFIG_BLK_STATS is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+# CONFIG_BLK_DEV_MD is not set
-+# CONFIG_MD_LINEAR is not set
-+# CONFIG_MD_RAID0 is not set
-+# CONFIG_MD_RAID1 is not set
-+# CONFIG_MD_RAID5 is not set
-+# CONFIG_MD_MULTIPATH is not set
-+# CONFIG_BLK_DEV_LVM is not set
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+# CONFIG_NETLINK_DEV is not set
-+CONFIG_NETFILTER=y
-+# CONFIG_NETFILTER_DEBUG is not set
-+CONFIG_FILTER=y
-+CONFIG_UNIX=y
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+# CONFIG_IP_PNP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_INET_ECN is not set
-+# CONFIG_SYN_COOKIES is not set
-+
-+#
-+#   IP: Netfilter Configuration
-+#
-+# CONFIG_IP_NF_CONNTRACK is not set
-+# CONFIG_IP_NF_QUEUE is not set
-+# CONFIG_IP_NF_IPTABLES is not set
-+# CONFIG_IP_NF_ARPTABLES is not set
-+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-+# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-+
-+#
-+#   IP: Virtual Server Configuration
-+#
-+# CONFIG_IP_VS is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_KHTTPD is not set
-+
-+#
-+#    SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_ATM is not set
-+# CONFIG_VLAN_8021Q is not set
-+
-+#
-+#  
-+#
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_LLC is not set
-+# CONFIG_NET_DIVERT is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_FASTROUTE is not set
-+# CONFIG_NET_HW_FLOWCONTROL is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+
-+#
-+# Telephony Support
-+#
-+# CONFIG_PHONE is not set
-+# CONFIG_PHONE_IXJ is not set
-+# CONFIG_PHONE_IXJ_PCMCIA is not set
-+
-+#
-+# ATA/IDE/MFM/RLL support
-+#
-+CONFIG_IDE=y
-+
-+#
-+# IDE, ATA and ATAPI Block devices
-+#
-+CONFIG_BLK_DEV_IDE=y
-+
-+#
-+# Please see Documentation/ide.txt for help/info on IDE drives
-+#
-+CONFIG_BLK_DEV_HD_IDE=y
-+CONFIG_BLK_DEV_HD=y
-+# CONFIG_BLK_DEV_IDE_SATA is not set
-+CONFIG_BLK_DEV_IDEDISK=y
-+CONFIG_IDEDISK_MULTI_MODE=y
-+CONFIG_IDEDISK_STROKE=y
-+# CONFIG_BLK_DEV_IDECS is not set
-+# CONFIG_BLK_DEV_DELKIN is not set
-+# CONFIG_BLK_DEV_IDECD is not set
-+# CONFIG_BLK_DEV_IDETAPE is not set
-+# CONFIG_BLK_DEV_IDEFLOPPY is not set
-+# CONFIG_BLK_DEV_IDESCSI is not set
-+# CONFIG_IDE_TASK_IOCTL is not set
-+
-+#
-+# IDE chipset support/bugfixes
-+#
-+# CONFIG_BLK_DEV_CMD640 is not set
-+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-+# CONFIG_BLK_DEV_ISAPNP is not set
-+# CONFIG_IDE_CHIPSETS is not set
-+# CONFIG_IDEDMA_AUTO is not set
-+# CONFIG_DMA_NONPCI is not set
-+# CONFIG_BLK_DEV_ATARAID is not set
-+# CONFIG_BLK_DEV_ATARAID_PDC is not set
-+# CONFIG_BLK_DEV_ATARAID_HPT is not set
-+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-+# CONFIG_BLK_DEV_ATARAID_SII is not set
-+
-+#
-+# SCSI support
-+#
-+CONFIG_SCSI=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+CONFIG_SD_EXTRA_DEVS=40
-+CONFIG_CHR_DEV_ST=y
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=y
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+CONFIG_SR_EXTRA_DEVS=2
-+# CONFIG_CHR_DEV_SG is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_DEBUG_QUEUES is not set
-+# CONFIG_SCSI_MULTI_LUN is not set
-+CONFIG_SCSI_CONSTANTS=y
-+# CONFIG_SCSI_LOGGING is not set
-+
-+#
-+# SCSI low-level drivers
-+#
-+# CONFIG_SCSI_7000FASST is not set
-+# CONFIG_SCSI_ACARD is not set
-+# CONFIG_SCSI_AHA152X is not set
-+# CONFIG_SCSI_AHA1542 is not set
-+# CONFIG_SCSI_AHA1740 is not set
-+# CONFIG_SCSI_AACRAID is not set
-+# CONFIG_SCSI_AIC7XXX is not set
-+# CONFIG_SCSI_AIC79XX is not set
-+# CONFIG_SCSI_AIC7XXX_OLD is not set
-+# CONFIG_SCSI_DPT_I2O is not set
-+# CONFIG_SCSI_ADVANSYS is not set
-+# CONFIG_SCSI_IN2000 is not set
-+# CONFIG_SCSI_AM53C974 is not set
-+# CONFIG_SCSI_MEGARAID is not set
-+# CONFIG_SCSI_MEGARAID2 is not set
-+# CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
-+# CONFIG_SCSI_SATA_SVW is not set
-+# CONFIG_SCSI_ATA_PIIX is not set
-+# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
-+# CONFIG_SCSI_SATA_PROMISE is not set
-+# CONFIG_SCSI_SATA_SX4 is not set
-+# CONFIG_SCSI_SATA_SIL is not set
-+# CONFIG_SCSI_SATA_SIS is not set
-+# CONFIG_SCSI_SATA_ULI is not set
-+# CONFIG_SCSI_SATA_VIA is not set
-+# CONFIG_SCSI_SATA_VITESSE is not set
-+# CONFIG_SCSI_BUSLOGIC is not set
-+# CONFIG_SCSI_DMX3191D is not set
-+# CONFIG_SCSI_DTC3280 is not set
-+# CONFIG_SCSI_EATA is not set
-+# CONFIG_SCSI_EATA_DMA is not set
-+# CONFIG_SCSI_EATA_PIO is not set
-+# CONFIG_SCSI_FUTURE_DOMAIN is not set
-+# CONFIG_SCSI_GDTH is not set
-+# CONFIG_SCSI_GENERIC_NCR5380 is not set
-+# CONFIG_SCSI_INITIO is not set
-+# CONFIG_SCSI_INIA100 is not set
-+# CONFIG_SCSI_NCR53C406A is not set
-+# CONFIG_SCSI_NCR53C7xx is not set
-+# CONFIG_SCSI_PAS16 is not set
-+# CONFIG_SCSI_PCI2000 is not set
-+# CONFIG_SCSI_PCI2220I is not set
-+# CONFIG_SCSI_PSI240I is not set
-+# CONFIG_SCSI_QLOGIC_FAS is not set
-+# CONFIG_SCSI_SIM710 is not set
-+# CONFIG_SCSI_SYM53C416 is not set
-+# CONFIG_SCSI_T128 is not set
-+# CONFIG_SCSI_U14_34F is not set
-+# CONFIG_SCSI_NSP32 is not set
-+# CONFIG_SCSI_DEBUG is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+# CONFIG_FUSION_BOOT is not set
-+# CONFIG_FUSION_ISENSE is not set
-+# CONFIG_FUSION_CTL is not set
-+# CONFIG_FUSION_LAN is not set
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+
-+#
-+# ARCnet devices
-+#
-+# CONFIG_ARCNET is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_ETHERTAP is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_SUNLANCE is not set
-+# CONFIG_SUNBMAC is not set
-+# CONFIG_SUNQE is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_LANCE is not set
-+# CONFIG_NET_VENDOR_SMC is not set
-+# CONFIG_NET_VENDOR_RACAL is not set
-+# CONFIG_NET_ISA is not set
-+# CONFIG_NET_PCI is not set
-+# CONFIG_NET_POCKET is not set
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+# CONFIG_ACENIC is not set
-+# CONFIG_DL2K is not set
-+# CONFIG_E1000 is not set
-+# CONFIG_MYRI_SBUS is not set
-+# CONFIG_NS83820 is not set
-+# CONFIG_HAMACHI is not set
-+# CONFIG_YELLOWFIN is not set
-+# CONFIG_R8169 is not set
-+# CONFIG_SK98LIN is not set
-+# CONFIG_TIGON3 is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+# CONFIG_PLIP is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+# CONFIG_NET_RADIO is not set
-+
-+#
-+# Token Ring devices
-+#
-+# CONFIG_TR is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_RCPCI is not set
-+# CONFIG_SHAPER is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+
-+#
-+# Amateur Radio support
-+#
-+# CONFIG_HAMRADIO is not set
-+
-+#
-+# IrDA (infrared) support
-+#
-+# CONFIG_IRDA is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input core support
-+#
-+CONFIG_INPUT=y
-+CONFIG_INPUT_KEYBDEV=y
-+CONFIG_INPUT_MOUSEDEV=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_UINPUT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+# CONFIG_SERIAL is not set
-+# CONFIG_SERIAL_EXTENDED is not set
-+CONFIG_SERIAL_NONSTANDARD=y
-+# CONFIG_COMPUTONE is not set
-+# CONFIG_ROCKETPORT is not set
-+# CONFIG_CYCLADES is not set
-+# CONFIG_DIGIEPCA is not set
-+# CONFIG_DIGI is not set
-+# CONFIG_ESPSERIAL is not set
-+# CONFIG_MOXA_INTELLIO is not set
-+# CONFIG_MOXA_SMARTIO is not set
-+# CONFIG_ISI is not set
-+# CONFIG_SYNCLINK is not set
-+# CONFIG_SYNCLINKMP is not set
-+# CONFIG_N_HDLC is not set
-+# CONFIG_RISCOM8 is not set
-+# CONFIG_SPECIALIX is not set
-+# CONFIG_SX is not set
-+# CONFIG_RIO is not set
-+# CONFIG_STALDRV is not set
-+# CONFIG_SERIAL_TX3912 is not set
-+# CONFIG_SERIAL_TX3912_CONSOLE is not set
-+# CONFIG_SERIAL_TXX9 is not set
-+# CONFIG_SERIAL_TXX9_CONSOLE is not set
-+# CONFIG_TXX927_SERIAL is not set
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_UNIX98_PTY_COUNT=256
-+
-+#
-+# I2C support
-+#
-+CONFIG_I2C=y
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_SCx200_ACB is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_CHARDEV is not set
-+# CONFIG_I2C_PROC is not set
-+
-+#
-+# Mice
-+#
-+# CONFIG_BUSMOUSE is not set
-+# CONFIG_MOUSE is not set
-+
-+#
-+# Joysticks
-+#
-+# CONFIG_INPUT_GAMEPORT is not set
-+# CONFIG_INPUT_NS558 is not set
-+# CONFIG_INPUT_LIGHTNING is not set
-+# CONFIG_INPUT_PCIGAME is not set
-+# CONFIG_INPUT_CS461X is not set
-+# CONFIG_INPUT_EMU10K1 is not set
-+# CONFIG_INPUT_SERIO is not set
-+# CONFIG_INPUT_SERPORT is not set
-+
-+#
-+# Joysticks
-+#
-+# CONFIG_INPUT_ANALOG is not set
-+# CONFIG_INPUT_A3D is not set
-+# CONFIG_INPUT_ADI is not set
-+# CONFIG_INPUT_COBRA is not set
-+# CONFIG_INPUT_GF2K is not set
-+# CONFIG_INPUT_GRIP is not set
-+# CONFIG_INPUT_INTERACT is not set
-+# CONFIG_INPUT_TMDC is not set
-+# CONFIG_INPUT_SIDEWINDER is not set
-+# CONFIG_INPUT_IFORCE_USB is not set
-+# CONFIG_INPUT_IFORCE_232 is not set
-+# CONFIG_INPUT_WARRIOR is not set
-+# CONFIG_INPUT_MAGELLAN is not set
-+# CONFIG_INPUT_SPACEORB is not set
-+# CONFIG_INPUT_SPACEBALL is not set
-+# CONFIG_INPUT_STINGER is not set
-+# CONFIG_INPUT_DB9 is not set
-+# CONFIG_INPUT_GAMECON is not set
-+# CONFIG_INPUT_TURBOGRAFX is not set
-+# CONFIG_QIC02_TAPE is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_IPMI_PANIC_EVENT is not set
-+# CONFIG_IPMI_DEVICE_INTERFACE is not set
-+# CONFIG_IPMI_KCS is not set
-+# CONFIG_IPMI_WATCHDOG is not set
-+
-+#
-+# Watchdog Cards
-+#
-+# CONFIG_WATCHDOG is not set
-+# CONFIG_SCx200 is not set
-+# CONFIG_SCx200_GPIO is not set
-+# CONFIG_AMD_PM768 is not set
-+# CONFIG_NVRAM is not set
-+# CONFIG_RTC is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+
-+#
-+# Ftape, the floppy tape device driver
-+#
-+# CONFIG_FTAPE is not set
-+# CONFIG_AGP is not set
-+
-+#
-+# Direct Rendering Manager (XFree86 DRI support)
-+#
-+# CONFIG_DRM is not set
-+
-+#
-+# File systems
-+#
-+# CONFIG_QUOTA is not set
-+# CONFIG_QFMT_V2 is not set
-+CONFIG_AUTOFS_FS=y
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_REISERFS_CHECK is not set
-+# CONFIG_REISERFS_PROC_INFO is not set
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_ADFS_FS_RW is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BEFS_DEBUG is not set
-+# CONFIG_BFS_FS is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+# CONFIG_UMSDOS_FS is not set
-+CONFIG_VFAT_FS=y
-+# CONFIG_EFS_FS is not set
-+# CONFIG_JFFS_FS is not set
-+# CONFIG_JFFS2_FS is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_TMPFS is not set
-+CONFIG_RAMFS=y
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_JOLIET is not set
-+# CONFIG_ZISOFS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_JFS_DEBUG is not set
-+# CONFIG_JFS_STATISTICS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_NTFS_FS is not set
-+# CONFIG_NTFS_RW is not set
-+# CONFIG_HPFS_FS is not set
-+CONFIG_PROC_FS=y
-+# CONFIG_DEVFS_FS is not set
-+# CONFIG_DEVFS_MOUNT is not set
-+# CONFIG_DEVFS_DEBUG is not set
-+CONFIG_DEVPTS_FS=y
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_QNX4FS_RW is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_EXT2_FS=y
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UDF_FS is not set
-+# CONFIG_UDF_RW is not set
-+# CONFIG_UFS_FS is not set
-+# CONFIG_UFS_FS_WRITE is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_XFS_QUOTA is not set
-+# CONFIG_XFS_RT is not set
-+# CONFIG_XFS_TRACE is not set
-+# CONFIG_XFS_DEBUG is not set
-+
-+#
-+# Network File Systems
-+#
-+# CONFIG_CODA_FS is not set
-+# CONFIG_INTERMEZZO_FS is not set
-+# CONFIG_NFS_FS is not set
-+# CONFIG_NFS_V3 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_ROOT_NFS is not set
-+# CONFIG_NFSD is not set
-+# CONFIG_NFSD_V3 is not set
-+# CONFIG_NFSD_TCP is not set
-+# CONFIG_SUNRPC is not set
-+# CONFIG_LOCKD is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_NCPFS_PACKET_SIGNING is not set
-+# CONFIG_NCPFS_IOCTL_LOCKING is not set
-+# CONFIG_NCPFS_STRONG is not set
-+# CONFIG_NCPFS_NFS_NS is not set
-+# CONFIG_NCPFS_OS2_NS is not set
-+# CONFIG_NCPFS_SMALLDOS is not set
-+# CONFIG_NCPFS_NLS is not set
-+# CONFIG_NCPFS_EXTRAS is not set
-+# CONFIG_ZISOFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_SMB_NLS is not set
-+CONFIG_NLS=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+# CONFIG_NLS_CODEPAGE_437 is not set
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ISO8859_1 is not set
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Console drivers
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+# CONFIG_MDA_CONSOLE is not set
-+
-+#
-+# Frame-buffer support
-+#
-+CONFIG_FB=y
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FB_CYBER2000 is not set
-+# CONFIG_FB_VIRTUAL is not set
-+CONFIG_FBCON_ADVANCED=y
-+# CONFIG_FBCON_MFB is not set
-+# CONFIG_FBCON_CFB2 is not set
-+# CONFIG_FBCON_CFB4 is not set
-+# CONFIG_FBCON_CFB8 is not set
-+CONFIG_FBCON_CFB16=y
-+# CONFIG_FBCON_CFB24 is not set
-+# CONFIG_FBCON_CFB32 is not set
-+# CONFIG_FBCON_AFB is not set
-+# CONFIG_FBCON_ILBM is not set
-+# CONFIG_FBCON_IPLAN2P2 is not set
-+# CONFIG_FBCON_IPLAN2P4 is not set
-+# CONFIG_FBCON_IPLAN2P8 is not set
-+# CONFIG_FBCON_MAC is not set
-+# CONFIG_FBCON_VGA_PLANES is not set
-+# CONFIG_FBCON_VGA is not set
-+# CONFIG_FBCON_HGA is not set
-+# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
-+CONFIG_FBCON_FONTS=y
-+CONFIG_FONT_8x8=y
-+CONFIG_FONT_8x16=y
-+# CONFIG_FONT_SUN8x16 is not set
-+# CONFIG_FONT_SUN12x22 is not set
-+# CONFIG_FONT_6x11 is not set
-+# CONFIG_FONT_PEARL_8x8 is not set
-+# CONFIG_FONT_ACORN_8x8 is not set
-+
-+#
-+# Sound
-+#
-+CONFIG_SOUND=y
-+# CONFIG_SOUND_ALI5455 is not set
-+# CONFIG_SOUND_BT878 is not set
-+# CONFIG_SOUND_CMPCI is not set
-+# CONFIG_SOUND_EMU10K1 is not set
-+# CONFIG_MIDI_EMU10K1 is not set
-+# CONFIG_SOUND_FUSION is not set
-+# CONFIG_SOUND_CS4281 is not set
-+# CONFIG_SOUND_ES1370 is not set
-+# CONFIG_SOUND_ES1371 is not set
-+# CONFIG_SOUND_ESSSOLO1 is not set
-+# CONFIG_SOUND_MAESTRO is not set
-+# CONFIG_SOUND_MAESTRO3 is not set
-+# CONFIG_SOUND_FORTE is not set
-+# CONFIG_SOUND_ICH is not set
-+# CONFIG_SOUND_RME96XX is not set
-+# CONFIG_SOUND_SONICVIBES is not set
-+# CONFIG_SOUND_TRIDENT is not set
-+# CONFIG_SOUND_MSNDCLAS is not set
-+# CONFIG_SOUND_MSNDPIN is not set
-+# CONFIG_SOUND_VIA82CXXX is not set
-+# CONFIG_MIDI_VIA82CXXX is not set
-+# CONFIG_SOUND_OSS is not set
-+# CONFIG_SOUND_TVMIXER is not set
-+# CONFIG_SOUND_AD1980 is not set
-+# CONFIG_SOUND_WM97XX is not set
-+
-+#
-+# USB support
-+#
-+# CONFIG_USB is not set
-+
-+#
-+# Support for USB gadgets
-+#
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# Bluetooth support
-+#
-+# CONFIG_BLUEZ is not set
-+
-+#
-+# Kernel hacking
-+#
-+CONFIG_CROSSCOMPILE=y
-+# CONFIG_RUNTIME_DEBUG is not set
-+# CONFIG_KGDB is not set
-+# CONFIG_GDB_CONSOLE is not set
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_MIPS_UNCACHED is not set
-+CONFIG_LOG_BUF_SHIFT=0
-+
-+#
-+# Cryptographic options
-+#
-+# CONFIG_CRYPTO is not set
-+
-+#
-+# Library routines
-+#
-+# CONFIG_CRC32 is not set
-+CONFIG_ZLIB_INFLATE=m
-+CONFIG_ZLIB_DEFLATE=m
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-hp-lj linux-2.4.32-rc1.mips/arch/mips/defconfig-hp-lj
---- linux-2.4.32-rc1/arch/mips/defconfig-hp-lj	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-hp-lj	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -184,8 +184,8 @@
- # Mapping drivers for chip access
- #
- CONFIG_MTD_PHYSMAP=y
--CONFIG_MTD_PHYSMAP_START=10040000
--CONFIG_MTD_PHYSMAP_LEN=00fc0000
-+CONFIG_MTD_PHYSMAP_START=0x10040000
-+CONFIG_MTD_PHYSMAP_LEN=0x00fc0000
- CONFIG_MTD_PHYSMAP_BUSWIDTH=4
- # CONFIG_MTD_PB1000 is not set
- # CONFIG_MTD_PB1500 is not set
-@@ -193,9 +193,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -214,7 +212,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -304,11 +301,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -604,7 +596,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_UNIX98_PTYS is not set
- 
- #
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-hydrogen3 linux-2.4.32-rc1.mips/arch/mips/defconfig-hydrogen3
---- linux-2.4.32-rc1/arch/mips/defconfig-hydrogen3	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-hydrogen3	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--CONFIG_MIPS_HYDROGEN3=y
- # CONFIG_MIPS_PB1550 is not set
-+CONFIG_MIPS_HYDROGEN3=y
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -214,9 +214,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--CONFIG_MTD_HYDROGEN3=y
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -235,7 +233,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -340,11 +337,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -590,7 +582,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--CONFIG_MIPS_HYDROGEN3_BUTTONS=y
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-@@ -838,6 +829,7 @@
- # CONFIG_FB_PM2 is not set
- # CONFIG_FB_PM3 is not set
- # CONFIG_FB_CYBER2000 is not set
-+CONFIG_FB_AU1100=y
- # CONFIG_FB_MATROX is not set
- # CONFIG_FB_ATY is not set
- # CONFIG_FB_RADEON is not set
-@@ -849,7 +841,6 @@
- # CONFIG_FB_VOODOO1 is not set
- # CONFIG_FB_TRIDENT is not set
- # CONFIG_FB_E1356 is not set
--CONFIG_FB_AU1100=y
- # CONFIG_FB_IT8181 is not set
- # CONFIG_FB_VIRTUAL is not set
- CONFIG_FBCON_ADVANCED=y
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ip22 linux-2.4.32-rc1.mips/arch/mips/defconfig-ip22
---- linux-2.4.32-rc1/arch/mips/defconfig-ip22	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ip22	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -235,11 +235,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -319,9 +314,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -465,7 +462,6 @@
- # CONFIG_SERIAL is not set
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-it8172 linux-2.4.32-rc1.mips/arch/mips/defconfig-it8172
---- linux-2.4.32-rc1/arch/mips/defconfig-it8172	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-it8172	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -186,8 +186,8 @@
- # Mapping drivers for chip access
- #
- CONFIG_MTD_PHYSMAP=y
--CONFIG_MTD_PHYSMAP_START=8000000
--CONFIG_MTD_PHYSMAP_LEN=2000000
-+CONFIG_MTD_PHYSMAP_START=0x8000000
-+CONFIG_MTD_PHYSMAP_LEN=0x2000000
- CONFIG_MTD_PHYSMAP_BUSWIDTH=4
- # CONFIG_MTD_PB1000 is not set
- # CONFIG_MTD_PB1500 is not set
-@@ -195,9 +195,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -216,7 +214,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -304,11 +301,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -592,7 +584,6 @@
- CONFIG_PC_KEYB=y
- # CONFIG_IT8172_SCR0 is not set
- # CONFIG_IT8172_SCR1 is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ivr linux-2.4.32-rc1.mips/arch/mips/defconfig-ivr
---- linux-2.4.32-rc1/arch/mips/defconfig-ivr	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ivr	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -226,11 +226,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -516,7 +511,6 @@
- CONFIG_QTRONIX_KEYBOARD=y
- CONFIG_IT8172_CIR=y
- # CONFIG_IT8172_SCR0 is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-jmr3927 linux-2.4.32-rc1.mips/arch/mips/defconfig-jmr3927
---- linux-2.4.32-rc1/arch/mips/defconfig-jmr3927	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-jmr3927	2005-03-18 13:13:21.000000000 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -225,11 +225,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -454,7 +449,6 @@
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- CONFIG_TXX927_SERIAL=y
- CONFIG_TXX927_SERIAL_CONSOLE=y
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_UNIX98_PTYS is not set
- 
- #
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-lasat linux-2.4.32-rc1.mips/arch/mips/defconfig-lasat
---- linux-2.4.32-rc1/arch/mips/defconfig-lasat	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-lasat	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -198,9 +198,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -219,7 +217,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -303,11 +300,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -584,7 +576,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-malta linux-2.4.32-rc1.mips/arch/mips/defconfig-malta
---- linux-2.4.32-rc1/arch/mips/defconfig-malta	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-malta	2005-04-19 14:19:34.000000000 +0200
-@@ -22,16 +22,19 @@
- #
- # CONFIG_ACER_PICA_61 is not set
- # CONFIG_MIPS_BOSPORUS is not set
-+# CONFIG_MIPS_FICMMP is not set
- # CONFIG_MIPS_MIRAGE is not set
- # CONFIG_MIPS_DB1000 is not set
- # CONFIG_MIPS_DB1100 is not set
- # CONFIG_MIPS_DB1500 is not set
- # CONFIG_MIPS_DB1550 is not set
-+# CONFIG_MIPS_DB1200 is not set
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_PB1200 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -237,11 +240,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -273,8 +271,83 @@
- #
- # ATA/IDE/MFM/RLL support
- #
--# CONFIG_IDE is not set
-+CONFIG_IDE=y
-+
-+#
-+# IDE, ATA and ATAPI Block devices
-+#
-+CONFIG_BLK_DEV_IDE=y
-+
-+#
-+# Please see Documentation/ide.txt for help/info on IDE drives
-+#
-+# CONFIG_BLK_DEV_HD_IDE is not set
- # CONFIG_BLK_DEV_HD is not set
-+# CONFIG_BLK_DEV_IDE_SATA is not set
-+CONFIG_BLK_DEV_IDEDISK=y
-+# CONFIG_IDEDISK_MULTI_MODE is not set
-+# CONFIG_IDEDISK_STROKE is not set
-+# CONFIG_BLK_DEV_IDECS is not set
-+# CONFIG_BLK_DEV_DELKIN is not set
-+CONFIG_BLK_DEV_IDECD=y
-+CONFIG_BLK_DEV_IDETAPE=y
-+CONFIG_BLK_DEV_IDEFLOPPY=y
-+CONFIG_BLK_DEV_IDESCSI=y
-+# CONFIG_IDE_TASK_IOCTL is not set
-+
-+#
-+# IDE chipset support/bugfixes
-+#
-+# CONFIG_BLK_DEV_CMD640 is not set
-+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-+# CONFIG_BLK_DEV_ISAPNP is not set
-+CONFIG_BLK_DEV_IDEPCI=y
-+CONFIG_BLK_DEV_GENERIC=y
-+CONFIG_IDEPCI_SHARE_IRQ=y
-+CONFIG_BLK_DEV_IDEDMA_PCI=y
-+# CONFIG_BLK_DEV_OFFBOARD is not set
-+CONFIG_BLK_DEV_IDEDMA_FORCED=y
-+CONFIG_IDEDMA_PCI_AUTO=y
-+# CONFIG_IDEDMA_ONLYDISK is not set
-+CONFIG_BLK_DEV_IDEDMA=y
-+# CONFIG_IDEDMA_PCI_WIP is not set
-+# CONFIG_BLK_DEV_ADMA100 is not set
-+# CONFIG_BLK_DEV_AEC62XX is not set
-+# CONFIG_BLK_DEV_ALI15X3 is not set
-+# CONFIG_WDC_ALI15X3 is not set
-+# CONFIG_BLK_DEV_AMD74XX is not set
-+# CONFIG_AMD74XX_OVERRIDE is not set
-+# CONFIG_BLK_DEV_ATIIXP is not set
-+# CONFIG_BLK_DEV_CMD64X is not set
-+# CONFIG_BLK_DEV_TRIFLEX is not set
-+# CONFIG_BLK_DEV_CY82C693 is not set
-+# CONFIG_BLK_DEV_CS5530 is not set
-+# CONFIG_BLK_DEV_HPT34X is not set
-+# CONFIG_HPT34X_AUTODMA is not set
-+# CONFIG_BLK_DEV_HPT366 is not set
-+CONFIG_BLK_DEV_PIIX=y
-+# CONFIG_BLK_DEV_NS87415 is not set
-+# CONFIG_BLK_DEV_OPTI621 is not set
-+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-+# CONFIG_PDC202XX_BURST is not set
-+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-+# CONFIG_BLK_DEV_RZ1000 is not set
-+# CONFIG_BLK_DEV_SC1200 is not set
-+# CONFIG_BLK_DEV_SVWKS is not set
-+# CONFIG_BLK_DEV_SIIMAGE is not set
-+# CONFIG_BLK_DEV_SIS5513 is not set
-+# CONFIG_BLK_DEV_SLC90E66 is not set
-+# CONFIG_BLK_DEV_TRM290 is not set
-+# CONFIG_BLK_DEV_VIA82CXXX is not set
-+# CONFIG_IDE_CHIPSETS is not set
-+CONFIG_IDEDMA_AUTO=y
-+# CONFIG_IDEDMA_IVB is not set
-+# CONFIG_DMA_NONPCI is not set
-+# CONFIG_BLK_DEV_ATARAID is not set
-+# CONFIG_BLK_DEV_ATARAID_PDC is not set
-+# CONFIG_BLK_DEV_ATARAID_HPT is not set
-+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-+# CONFIG_BLK_DEV_ATARAID_SII is not set
- 
- #
- # SCSI support
-@@ -319,9 +392,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -524,7 +599,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-mirage linux-2.4.32-rc1.mips/arch/mips/defconfig-mirage
---- linux-2.4.32-rc1/arch/mips/defconfig-mirage	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-mirage	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -209,9 +209,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- CONFIG_MTD_MIRAGE=y
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -230,7 +228,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -335,11 +332,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -560,7 +552,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-mpc30x linux-2.4.32-rc1.mips/arch/mips/defconfig-mpc30x
---- linux-2.4.32-rc1/arch/mips/defconfig-mpc30x	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-mpc30x	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -228,11 +228,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -400,7 +395,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-mtx-1 linux-2.4.32-rc1.mips/arch/mips/defconfig-mtx-1
---- linux-2.4.32-rc1/arch/mips/defconfig-mtx-1	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-mtx-1	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- CONFIG_MIPS_MTX1=y
- # CONFIG_COGENT_CSB250 is not set
-@@ -193,9 +193,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- CONFIG_MTD_MTX1=y
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -214,7 +212,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -371,11 +368,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- CONFIG_BRIDGE=m
- # CONFIG_X25 is not set
-@@ -479,9 +471,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -700,7 +694,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-nino linux-2.4.32-rc1.mips/arch/mips/defconfig-nino
---- linux-2.4.32-rc1/arch/mips/defconfig-nino	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-nino	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -226,11 +226,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -339,7 +334,6 @@
- # CONFIG_SERIAL_TXX9 is not set
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_UNIX98_PTYS is not set
- 
- #
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ocelot linux-2.4.32-rc1.mips/arch/mips/defconfig-ocelot
---- linux-2.4.32-rc1/arch/mips/defconfig-ocelot	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ocelot	2005-03-18 13:13:21.000000000 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -194,9 +194,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- CONFIG_MTD_OCELOT=y
-@@ -215,7 +213,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- CONFIG_MTD_DOC2000=y
- # CONFIG_MTD_DOC2001 is not set
- CONFIG_MTD_DOCPROBE=y
-@@ -307,11 +304,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -513,7 +505,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-osprey linux-2.4.32-rc1.mips/arch/mips/defconfig-osprey
---- linux-2.4.32-rc1/arch/mips/defconfig-osprey	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-osprey	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -227,11 +227,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -388,7 +383,6 @@
- # CONFIG_SERIAL_MULTIPORT is not set
- # CONFIG_HUB6 is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-pb1000 linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1000
---- linux-2.4.32-rc1/arch/mips/defconfig-pb1000	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1000	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- CONFIG_MIPS_PB1000=y
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -215,9 +215,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -236,7 +234,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -324,11 +321,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -622,7 +614,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-@@ -707,7 +698,7 @@
- #
- # CONFIG_PCMCIA_SERIAL_CS is not set
- # CONFIG_SYNCLINK_CS is not set
--CONFIG_AU1X00_GPIO=m
-+CONFIG_AU1X00_GPIO=y
- # CONFIG_TS_AU1X00_ADS7846 is not set
- 
- #
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-pb1100 linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1100
---- linux-2.4.32-rc1/arch/mips/defconfig-pb1100	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1100	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- CONFIG_MIPS_PB1100=y
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -198,9 +198,7 @@
- # CONFIG_MTD_MTX1 is not set
- CONFIG_MTD_PB1500_BOOT=y
- CONFIG_MTD_PB1500_USER=y
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -219,7 +217,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -324,11 +321,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -613,7 +605,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-@@ -859,6 +850,7 @@
- # CONFIG_FB_PM2 is not set
- # CONFIG_FB_PM3 is not set
- # CONFIG_FB_CYBER2000 is not set
-+CONFIG_FB_AU1100=y
- # CONFIG_FB_MATROX is not set
- # CONFIG_FB_ATY is not set
- # CONFIG_FB_RADEON is not set
-@@ -870,7 +862,6 @@
- # CONFIG_FB_VOODOO1 is not set
- # CONFIG_FB_TRIDENT is not set
- # CONFIG_FB_E1356 is not set
--CONFIG_FB_AU1100=y
- # CONFIG_FB_IT8181 is not set
- # CONFIG_FB_VIRTUAL is not set
- CONFIG_FBCON_ADVANCED=y
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-pb1200 linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1200
---- linux-2.4.32-rc1/arch/mips/defconfig-pb1200	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1200	2005-03-18 13:13:21.000000000 +0100
-@@ -0,0 +1,1060 @@
-+#
-+# Automatically generated make config: don't edit
-+#
-+CONFIG_MIPS=y
-+CONFIG_MIPS32=y
-+# CONFIG_MIPS64 is not set
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+# CONFIG_MODVERSIONS is not set
-+CONFIG_KMOD=y
-+
-+#
-+# Machine selection
-+#
-+# CONFIG_ACER_PICA_61 is not set
-+# CONFIG_MIPS_BOSPORUS is not set
-+# CONFIG_MIPS_MIRAGE is not set
-+# CONFIG_MIPS_DB1000 is not set
-+# CONFIG_MIPS_DB1100 is not set
-+# CONFIG_MIPS_DB1500 is not set
-+# CONFIG_MIPS_DB1550 is not set
-+# CONFIG_MIPS_PB1000 is not set
-+# CONFIG_MIPS_PB1100 is not set
-+# CONFIG_MIPS_PB1500 is not set
-+# CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
-+# CONFIG_MIPS_XXS1500 is not set
-+# CONFIG_MIPS_MTX1 is not set
-+# CONFIG_COGENT_CSB250 is not set
-+# CONFIG_BAGET_MIPS is not set
-+# CONFIG_CASIO_E55 is not set
-+# CONFIG_MIPS_COBALT is not set
-+# CONFIG_DECSTATION is not set
-+# CONFIG_MIPS_EV64120 is not set
-+# CONFIG_MIPS_EV96100 is not set
-+# CONFIG_MIPS_IVR is not set
-+# CONFIG_HP_LASERJET is not set
-+# CONFIG_IBM_WORKPAD is not set
-+# CONFIG_LASAT is not set
-+# CONFIG_MIPS_ITE8172 is not set
-+# CONFIG_MIPS_ATLAS is not set
-+# CONFIG_MIPS_MAGNUM_4000 is not set
-+# CONFIG_MIPS_MALTA is not set
-+# CONFIG_MIPS_SEAD is not set
-+# CONFIG_MOMENCO_OCELOT is not set
-+# CONFIG_MOMENCO_OCELOT_G is not set
-+# CONFIG_MOMENCO_OCELOT_C is not set
-+# CONFIG_MOMENCO_JAGUAR_ATX is not set
-+# CONFIG_PMC_BIG_SUR is not set
-+# CONFIG_PMC_STRETCH is not set
-+# CONFIG_PMC_YOSEMITE is not set
-+# CONFIG_DDB5074 is not set
-+# CONFIG_DDB5476 is not set
-+# CONFIG_DDB5477 is not set
-+# CONFIG_NEC_OSPREY is not set
-+# CONFIG_NEC_EAGLE is not set
-+# CONFIG_OLIVETTI_M700 is not set
-+# CONFIG_NINO is not set
-+# CONFIG_SGI_IP22 is not set
-+# CONFIG_SGI_IP27 is not set
-+# CONFIG_SIBYTE_SB1xxx_SOC is not set
-+# CONFIG_SNI_RM200_PCI is not set
-+# CONFIG_TANBAC_TB0226 is not set
-+# CONFIG_TANBAC_TB0229 is not set
-+# CONFIG_TOSHIBA_JMR3927 is not set
-+# CONFIG_TOSHIBA_RBTX4927 is not set
-+# CONFIG_VICTOR_MPC30X is not set
-+# CONFIG_ZAO_CAPCELLA is not set
-+# CONFIG_HIGHMEM is not set
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+CONFIG_SOC_AU1X00=y
-+CONFIG_SOC_AU1200=y
-+CONFIG_NONCOHERENT_IO=y
-+CONFIG_PC_KEYB=y
-+# CONFIG_MIPS_AU1000 is not set
-+
-+#
-+# CPU selection
-+#
-+CONFIG_CPU_MIPS32=y
-+# CONFIG_CPU_MIPS64 is not set
-+# CONFIG_CPU_R3000 is not set
-+# CONFIG_CPU_TX39XX is not set
-+# CONFIG_CPU_VR41XX is not set
-+# CONFIG_CPU_R4300 is not set
-+# CONFIG_CPU_R4X00 is not set
-+# CONFIG_CPU_TX49XX is not set
-+# CONFIG_CPU_R5000 is not set
-+# CONFIG_CPU_R5432 is not set
-+# CONFIG_CPU_R6000 is not set
-+# CONFIG_CPU_NEVADA is not set
-+# CONFIG_CPU_R8000 is not set
-+# CONFIG_CPU_R10000 is not set
-+# CONFIG_CPU_RM7000 is not set
-+# CONFIG_CPU_RM9000 is not set
-+# CONFIG_CPU_SB1 is not set
-+CONFIG_PAGE_SIZE_4KB=y
-+# CONFIG_PAGE_SIZE_16KB is not set
-+# CONFIG_PAGE_SIZE_64KB is not set
-+CONFIG_CPU_HAS_PREFETCH=y
-+# CONFIG_VTAG_ICACHE is not set
-+CONFIG_64BIT_PHYS_ADDR=y
-+# CONFIG_CPU_ADVANCED is not set
-+CONFIG_CPU_HAS_LLSC=y
-+# CONFIG_CPU_HAS_LLDSCD is not set
-+# CONFIG_CPU_HAS_WB is not set
-+CONFIG_CPU_HAS_SYNC=y
-+
-+#
-+# General setup
-+#
-+CONFIG_CPU_LITTLE_ENDIAN=y
-+# CONFIG_BUILD_ELF64 is not set
-+CONFIG_NET=y
-+CONFIG_PCI=y
-+CONFIG_PCI_NEW=y
-+CONFIG_PCI_AUTO=y
-+# CONFIG_PCI_NAMES is not set
-+# CONFIG_ISA is not set
-+# CONFIG_TC is not set
-+# CONFIG_MCA is not set
-+# CONFIG_SBUS is not set
-+CONFIG_HOTPLUG=y
-+
-+#
-+# PCMCIA/CardBus support
-+#
-+CONFIG_PCMCIA=m
-+# CONFIG_CARDBUS is not set
-+# CONFIG_TCIC is not set
-+# CONFIG_I82092 is not set
-+# CONFIG_I82365 is not set
-+CONFIG_PCMCIA_AU1X00=m
-+
-+#
-+# PCI Hotplug Support
-+#
-+# CONFIG_HOTPLUG_PCI is not set
-+# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-+# CONFIG_HOTPLUG_PCI_SHPC is not set
-+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
-+# CONFIG_HOTPLUG_PCI_PCIE is not set
-+# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
-+CONFIG_SYSVIPC=y
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+CONFIG_SYSCTL=y
-+CONFIG_KCORE_ELF=y
-+# CONFIG_KCORE_AOUT is not set
-+# CONFIG_BINFMT_AOUT is not set
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_MIPS32_COMPAT is not set
-+# CONFIG_MIPS32_O32 is not set
-+# CONFIG_MIPS32_N32 is not set
-+# CONFIG_BINFMT_ELF32 is not set
-+# CONFIG_BINFMT_MISC is not set
-+# CONFIG_OOM_KILLER is not set
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="mem=96M"
-+# CONFIG_PM is not set
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+# CONFIG_MTD is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play configuration
-+#
-+# CONFIG_PNP is not set
-+# CONFIG_ISAPNP is not set
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_FD is not set
-+# CONFIG_BLK_DEV_XD is not set
-+# CONFIG_PARIDE is not set
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_CISS_SCSI_TAPE is not set
-+# CONFIG_CISS_MONITOR_THREAD is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_SX8 is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_RAM is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+# CONFIG_BLK_STATS is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+# CONFIG_BLK_DEV_MD is not set
-+# CONFIG_MD_LINEAR is not set
-+# CONFIG_MD_RAID0 is not set
-+# CONFIG_MD_RAID1 is not set
-+# CONFIG_MD_RAID5 is not set
-+# CONFIG_MD_MULTIPATH is not set
-+# CONFIG_BLK_DEV_LVM is not set
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+# CONFIG_NETLINK_DEV is not set
-+CONFIG_NETFILTER=y
-+# CONFIG_NETFILTER_DEBUG is not set
-+CONFIG_FILTER=y
-+CONFIG_UNIX=y
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+CONFIG_IP_PNP_BOOTP=y
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_INET_ECN is not set
-+# CONFIG_SYN_COOKIES is not set
-+
-+#
-+#   IP: Netfilter Configuration
-+#
-+# CONFIG_IP_NF_CONNTRACK is not set
-+# CONFIG_IP_NF_QUEUE is not set
-+# CONFIG_IP_NF_IPTABLES is not set
-+# CONFIG_IP_NF_ARPTABLES is not set
-+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-+# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-+
-+#
-+#   IP: Virtual Server Configuration
-+#
-+# CONFIG_IP_VS is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_KHTTPD is not set
-+
-+#
-+#    SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_ATM is not set
-+# CONFIG_VLAN_8021Q is not set
-+
-+#
-+#  
-+#
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_LLC is not set
-+# CONFIG_NET_DIVERT is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_FASTROUTE is not set
-+# CONFIG_NET_HW_FLOWCONTROL is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+
-+#
-+# Telephony Support
-+#
-+# CONFIG_PHONE is not set
-+# CONFIG_PHONE_IXJ is not set
-+# CONFIG_PHONE_IXJ_PCMCIA is not set
-+
-+#
-+# ATA/IDE/MFM/RLL support
-+#
-+CONFIG_IDE=y
-+
-+#
-+# IDE, ATA and ATAPI Block devices
-+#
-+CONFIG_BLK_DEV_IDE=y
-+
-+#
-+# Please see Documentation/ide.txt for help/info on IDE drives
-+#
-+# CONFIG_BLK_DEV_HD_IDE is not set
-+# CONFIG_BLK_DEV_HD is not set
-+# CONFIG_BLK_DEV_IDE_SATA is not set
-+CONFIG_BLK_DEV_IDEDISK=y
-+CONFIG_IDEDISK_MULTI_MODE=y
-+CONFIG_IDEDISK_STROKE=y
-+CONFIG_BLK_DEV_IDECS=m
-+# CONFIG_BLK_DEV_DELKIN is not set
-+# CONFIG_BLK_DEV_IDECD is not set
-+# CONFIG_BLK_DEV_IDETAPE is not set
-+# CONFIG_BLK_DEV_IDEFLOPPY is not set
-+# CONFIG_BLK_DEV_IDESCSI is not set
-+# CONFIG_IDE_TASK_IOCTL is not set
-+
-+#
-+# IDE chipset support/bugfixes
-+#
-+# CONFIG_BLK_DEV_CMD640 is not set
-+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-+# CONFIG_BLK_DEV_ISAPNP is not set
-+# CONFIG_BLK_DEV_IDEPCI is not set
-+# CONFIG_IDE_CHIPSETS is not set
-+# CONFIG_IDEDMA_AUTO is not set
-+# CONFIG_DMA_NONPCI is not set
-+# CONFIG_BLK_DEV_ATARAID is not set
-+# CONFIG_BLK_DEV_ATARAID_PDC is not set
-+# CONFIG_BLK_DEV_ATARAID_HPT is not set
-+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-+# CONFIG_BLK_DEV_ATARAID_SII is not set
-+
-+#
-+# SCSI support
-+#
-+CONFIG_SCSI=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+CONFIG_SD_EXTRA_DEVS=40
-+CONFIG_CHR_DEV_ST=y
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=y
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+CONFIG_SR_EXTRA_DEVS=2
-+# CONFIG_CHR_DEV_SG is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_DEBUG_QUEUES is not set
-+# CONFIG_SCSI_MULTI_LUN is not set
-+CONFIG_SCSI_CONSTANTS=y
-+# CONFIG_SCSI_LOGGING is not set
-+
-+#
-+# SCSI low-level drivers
-+#
-+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-+# CONFIG_SCSI_7000FASST is not set
-+# CONFIG_SCSI_ACARD is not set
-+# CONFIG_SCSI_AHA152X is not set
-+# CONFIG_SCSI_AHA1542 is not set
-+# CONFIG_SCSI_AHA1740 is not set
-+# CONFIG_SCSI_AACRAID is not set
-+# CONFIG_SCSI_AIC7XXX is not set
-+# CONFIG_SCSI_AIC79XX is not set
-+# CONFIG_SCSI_AIC7XXX_OLD is not set
-+# CONFIG_SCSI_DPT_I2O is not set
-+# CONFIG_SCSI_ADVANSYS is not set
-+# CONFIG_SCSI_IN2000 is not set
-+# CONFIG_SCSI_AM53C974 is not set
-+# CONFIG_SCSI_MEGARAID is not set
-+# CONFIG_SCSI_MEGARAID2 is not set
-+# CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
-+# CONFIG_SCSI_SATA_SVW is not set
-+# CONFIG_SCSI_ATA_PIIX is not set
-+# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
-+# CONFIG_SCSI_SATA_PROMISE is not set
-+# CONFIG_SCSI_SATA_SX4 is not set
-+# CONFIG_SCSI_SATA_SIL is not set
-+# CONFIG_SCSI_SATA_SIS is not set
-+# CONFIG_SCSI_SATA_ULI is not set
-+# CONFIG_SCSI_SATA_VIA is not set
-+# CONFIG_SCSI_SATA_VITESSE is not set
-+# CONFIG_SCSI_BUSLOGIC is not set
-+# CONFIG_SCSI_CPQFCTS is not set
-+# CONFIG_SCSI_DMX3191D is not set
-+# CONFIG_SCSI_DTC3280 is not set
-+# CONFIG_SCSI_EATA is not set
-+# CONFIG_SCSI_EATA_DMA is not set
-+# CONFIG_SCSI_EATA_PIO is not set
-+# CONFIG_SCSI_FUTURE_DOMAIN is not set
-+# CONFIG_SCSI_GDTH is not set
-+# CONFIG_SCSI_GENERIC_NCR5380 is not set
-+# CONFIG_SCSI_INITIO is not set
-+# CONFIG_SCSI_INIA100 is not set
-+# CONFIG_SCSI_NCR53C406A is not set
-+# CONFIG_SCSI_NCR53C7xx is not set
-+# CONFIG_SCSI_SYM53C8XX_2 is not set
-+# CONFIG_SCSI_NCR53C8XX is not set
-+# CONFIG_SCSI_SYM53C8XX is not set
-+# CONFIG_SCSI_PAS16 is not set
-+# CONFIG_SCSI_PCI2000 is not set
-+# CONFIG_SCSI_PCI2220I is not set
-+# CONFIG_SCSI_PSI240I is not set
-+# CONFIG_SCSI_QLOGIC_FAS is not set
-+# CONFIG_SCSI_QLOGIC_ISP is not set
-+# CONFIG_SCSI_QLOGIC_FC is not set
-+# CONFIG_SCSI_QLOGIC_1280 is not set
-+# CONFIG_SCSI_SIM710 is not set
-+# CONFIG_SCSI_SYM53C416 is not set
-+# CONFIG_SCSI_DC390T is not set
-+# CONFIG_SCSI_T128 is not set
-+# CONFIG_SCSI_U14_34F is not set
-+# CONFIG_SCSI_NSP32 is not set
-+# CONFIG_SCSI_DEBUG is not set
-+
-+#
-+# PCMCIA SCSI adapter support
-+#
-+# CONFIG_SCSI_PCMCIA is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+# CONFIG_FUSION_BOOT is not set
-+# CONFIG_FUSION_ISENSE is not set
-+# CONFIG_FUSION_CTL is not set
-+# CONFIG_FUSION_LAN is not set
-+
-+#
-+# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-+#
-+# CONFIG_IEEE1394 is not set
-+
-+#
-+# I2O device support
-+#
-+# CONFIG_I2O is not set
-+# CONFIG_I2O_PCI is not set
-+# CONFIG_I2O_BLOCK is not set
-+# CONFIG_I2O_LAN is not set
-+# CONFIG_I2O_SCSI is not set
-+# CONFIG_I2O_PROC is not set
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+
-+#
-+# ARCnet devices
-+#
-+# CONFIG_ARCNET is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_ETHERTAP is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_MIPS_AU1X00_ENET is not set
-+# CONFIG_SUNLANCE is not set
-+# CONFIG_HAPPYMEAL is not set
-+# CONFIG_SUNBMAC is not set
-+# CONFIG_SUNQE is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_LANCE is not set
-+# CONFIG_NET_VENDOR_SMC is not set
-+# CONFIG_NET_VENDOR_RACAL is not set
-+# CONFIG_HP100 is not set
-+# CONFIG_NET_ISA is not set
-+# CONFIG_NET_PCI is not set
-+# CONFIG_NET_POCKET is not set
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+# CONFIG_ACENIC is not set
-+# CONFIG_DL2K is not set
-+# CONFIG_E1000 is not set
-+# CONFIG_MYRI_SBUS is not set
-+# CONFIG_NS83820 is not set
-+# CONFIG_HAMACHI is not set
-+# CONFIG_YELLOWFIN is not set
-+# CONFIG_R8169 is not set
-+# CONFIG_SK98LIN is not set
-+# CONFIG_TIGON3 is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+# CONFIG_PLIP is not set
-+CONFIG_PPP=m
-+CONFIG_PPP_MULTILINK=y
-+# CONFIG_PPP_FILTER is not set
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+# CONFIG_PPP_BSDCOMP is not set
-+CONFIG_PPPOE=m
-+# CONFIG_SLIP is not set
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+# CONFIG_NET_RADIO is not set
-+
-+#
-+# Token Ring devices
-+#
-+# CONFIG_TR is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_RCPCI is not set
-+# CONFIG_SHAPER is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+
-+#
-+# PCMCIA network device support
-+#
-+# CONFIG_NET_PCMCIA is not set
-+
-+#
-+# Amateur Radio support
-+#
-+# CONFIG_HAMRADIO is not set
-+
-+#
-+# IrDA (infrared) support
-+#
-+# CONFIG_IRDA is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input core support
-+#
-+CONFIG_INPUT=y
-+CONFIG_INPUT_KEYBDEV=y
-+CONFIG_INPUT_MOUSEDEV=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_UINPUT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+# CONFIG_VT_CONSOLE is not set
-+# CONFIG_SERIAL is not set
-+# CONFIG_SERIAL_EXTENDED is not set
-+CONFIG_SERIAL_NONSTANDARD=y
-+# CONFIG_COMPUTONE is not set
-+# CONFIG_ROCKETPORT is not set
-+# CONFIG_CYCLADES is not set
-+# CONFIG_DIGIEPCA is not set
-+# CONFIG_DIGI is not set
-+# CONFIG_ESPSERIAL is not set
-+# CONFIG_MOXA_INTELLIO is not set
-+# CONFIG_MOXA_SMARTIO is not set
-+# CONFIG_ISI is not set
-+# CONFIG_SYNCLINK is not set
-+# CONFIG_SYNCLINKMP is not set
-+# CONFIG_N_HDLC is not set
-+# CONFIG_RISCOM8 is not set
-+# CONFIG_SPECIALIX is not set
-+# CONFIG_SX is not set
-+# CONFIG_RIO is not set
-+# CONFIG_STALDRV is not set
-+# CONFIG_SERIAL_TX3912 is not set
-+# CONFIG_SERIAL_TX3912_CONSOLE is not set
-+# CONFIG_SERIAL_TXX9 is not set
-+# CONFIG_SERIAL_TXX9_CONSOLE is not set
-+CONFIG_AU1X00_UART=y
-+CONFIG_AU1X00_SERIAL_CONSOLE=y
-+# CONFIG_AU1X00_USB_TTY is not set
-+# CONFIG_AU1X00_USB_RAW is not set
-+# CONFIG_TXX927_SERIAL is not set
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_UNIX98_PTY_COUNT=256
-+
-+#
-+# I2C support
-+#
-+CONFIG_I2C=y
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_SCx200_ACB is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_CHARDEV is not set
-+CONFIG_I2C_PROC=y
-+
-+#
-+# Mice
-+#
-+# CONFIG_BUSMOUSE is not set
-+# CONFIG_MOUSE is not set
-+
-+#
-+# Joysticks
-+#
-+# CONFIG_INPUT_GAMEPORT is not set
-+# CONFIG_INPUT_NS558 is not set
-+# CONFIG_INPUT_LIGHTNING is not set
-+# CONFIG_INPUT_PCIGAME is not set
-+# CONFIG_INPUT_CS461X is not set
-+# CONFIG_INPUT_EMU10K1 is not set
-+# CONFIG_INPUT_SERIO is not set
-+# CONFIG_INPUT_SERPORT is not set
-+
-+#
-+# Joysticks
-+#
-+# CONFIG_INPUT_ANALOG is not set
-+# CONFIG_INPUT_A3D is not set
-+# CONFIG_INPUT_ADI is not set
-+# CONFIG_INPUT_COBRA is not set
-+# CONFIG_INPUT_GF2K is not set
-+# CONFIG_INPUT_GRIP is not set
-+# CONFIG_INPUT_INTERACT is not set
-+# CONFIG_INPUT_TMDC is not set
-+# CONFIG_INPUT_SIDEWINDER is not set
-+# CONFIG_INPUT_IFORCE_USB is not set
-+# CONFIG_INPUT_IFORCE_232 is not set
-+# CONFIG_INPUT_WARRIOR is not set
-+# CONFIG_INPUT_MAGELLAN is not set
-+# CONFIG_INPUT_SPACEORB is not set
-+# CONFIG_INPUT_SPACEBALL is not set
-+# CONFIG_INPUT_STINGER is not set
-+# CONFIG_INPUT_DB9 is not set
-+# CONFIG_INPUT_GAMECON is not set
-+# CONFIG_INPUT_TURBOGRAFX is not set
-+# CONFIG_QIC02_TAPE is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_IPMI_PANIC_EVENT is not set
-+# CONFIG_IPMI_DEVICE_INTERFACE is not set
-+# CONFIG_IPMI_KCS is not set
-+# CONFIG_IPMI_WATCHDOG is not set
-+
-+#
-+# Watchdog Cards
-+#
-+# CONFIG_WATCHDOG is not set
-+# CONFIG_SCx200 is not set
-+# CONFIG_SCx200_GPIO is not set
-+# CONFIG_AMD_PM768 is not set
-+# CONFIG_NVRAM is not set
-+# CONFIG_RTC is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+
-+#
-+# Ftape, the floppy tape device driver
-+#
-+# CONFIG_FTAPE is not set
-+# CONFIG_AGP is not set
-+
-+#
-+# Direct Rendering Manager (XFree86 DRI support)
-+#
-+# CONFIG_DRM is not set
-+
-+#
-+# PCMCIA character devices
-+#
-+# CONFIG_PCMCIA_SERIAL_CS is not set
-+# CONFIG_SYNCLINK_CS is not set
-+# CONFIG_AU1X00_GPIO is not set
-+# CONFIG_TS_AU1X00_ADS7846 is not set
-+
-+#
-+# File systems
-+#
-+# CONFIG_QUOTA is not set
-+# CONFIG_QFMT_V2 is not set
-+CONFIG_AUTOFS_FS=y
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_REISERFS_CHECK is not set
-+# CONFIG_REISERFS_PROC_INFO is not set
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_ADFS_FS_RW is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BEFS_DEBUG is not set
-+# CONFIG_BFS_FS is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+# CONFIG_UMSDOS_FS is not set
-+CONFIG_VFAT_FS=y
-+# CONFIG_EFS_FS is not set
-+# CONFIG_JFFS_FS is not set
-+# CONFIG_JFFS2_FS is not set
-+# CONFIG_CRAMFS is not set
-+CONFIG_TMPFS=y
-+CONFIG_RAMFS=y
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_JOLIET is not set
-+# CONFIG_ZISOFS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_JFS_DEBUG is not set
-+# CONFIG_JFS_STATISTICS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_NTFS_FS is not set
-+# CONFIG_NTFS_RW is not set
-+# CONFIG_HPFS_FS is not set
-+CONFIG_PROC_FS=y
-+# CONFIG_DEVFS_FS is not set
-+# CONFIG_DEVFS_MOUNT is not set
-+# CONFIG_DEVFS_DEBUG is not set
-+CONFIG_DEVPTS_FS=y
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_QNX4FS_RW is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_EXT2_FS=y
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UDF_FS is not set
-+# CONFIG_UDF_RW is not set
-+# CONFIG_UFS_FS is not set
-+# CONFIG_UFS_FS_WRITE is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_XFS_QUOTA is not set
-+# CONFIG_XFS_RT is not set
-+# CONFIG_XFS_TRACE is not set
-+# CONFIG_XFS_DEBUG is not set
-+
-+#
-+# Network File Systems
-+#
-+# CONFIG_CODA_FS is not set
-+# CONFIG_INTERMEZZO_FS is not set
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_DIRECTIO is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+# CONFIG_NFSD_V3 is not set
-+# CONFIG_NFSD_TCP is not set
-+CONFIG_SUNRPC=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+# CONFIG_SMB_FS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_NCPFS_PACKET_SIGNING is not set
-+# CONFIG_NCPFS_IOCTL_LOCKING is not set
-+# CONFIG_NCPFS_STRONG is not set
-+# CONFIG_NCPFS_NFS_NS is not set
-+# CONFIG_NCPFS_OS2_NS is not set
-+# CONFIG_NCPFS_SMALLDOS is not set
-+# CONFIG_NCPFS_NLS is not set
-+# CONFIG_NCPFS_EXTRAS is not set
-+# CONFIG_ZISOFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_SMB_NLS is not set
-+CONFIG_NLS=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+# CONFIG_NLS_CODEPAGE_437 is not set
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ISO8859_1 is not set
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Console drivers
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+# CONFIG_MDA_CONSOLE is not set
-+
-+#
-+# Frame-buffer support
-+#
-+CONFIG_FB=y
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FB_RIVA is not set
-+# CONFIG_FB_CLGEN is not set
-+# CONFIG_FB_PM2 is not set
-+# CONFIG_FB_PM3 is not set
-+# CONFIG_FB_CYBER2000 is not set
-+# CONFIG_FB_MATROX is not set
-+# CONFIG_FB_ATY is not set
-+# CONFIG_FB_RADEON is not set
-+# CONFIG_FB_ATY128 is not set
-+# CONFIG_FB_INTEL is not set
-+# CONFIG_FB_SIS is not set
-+# CONFIG_FB_NEOMAGIC is not set
-+# CONFIG_FB_3DFX is not set
-+# CONFIG_FB_VOODOO1 is not set
-+# CONFIG_FB_TRIDENT is not set
-+# CONFIG_FB_E1356 is not set
-+# CONFIG_FB_IT8181 is not set
-+# CONFIG_FB_VIRTUAL is not set
-+CONFIG_FBCON_ADVANCED=y
-+# CONFIG_FBCON_MFB is not set
-+# CONFIG_FBCON_CFB2 is not set
-+# CONFIG_FBCON_CFB4 is not set
-+# CONFIG_FBCON_CFB8 is not set
-+CONFIG_FBCON_CFB16=y
-+# CONFIG_FBCON_CFB24 is not set
-+CONFIG_FBCON_CFB32=y
-+# CONFIG_FBCON_AFB is not set
-+# CONFIG_FBCON_ILBM is not set
-+# CONFIG_FBCON_IPLAN2P2 is not set
-+# CONFIG_FBCON_IPLAN2P4 is not set
-+# CONFIG_FBCON_IPLAN2P8 is not set
-+# CONFIG_FBCON_MAC is not set
-+# CONFIG_FBCON_VGA_PLANES is not set
-+# CONFIG_FBCON_VGA is not set
-+# CONFIG_FBCON_HGA is not set
-+# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
-+CONFIG_FBCON_FONTS=y
-+CONFIG_FONT_8x8=y
-+CONFIG_FONT_8x16=y
-+# CONFIG_FONT_SUN8x16 is not set
-+# CONFIG_FONT_SUN12x22 is not set
-+# CONFIG_FONT_6x11 is not set
-+# CONFIG_FONT_PEARL_8x8 is not set
-+# CONFIG_FONT_ACORN_8x8 is not set
-+
-+#
-+# Sound
-+#
-+CONFIG_SOUND=y
-+# CONFIG_SOUND_ALI5455 is not set
-+# CONFIG_SOUND_BT878 is not set
-+# CONFIG_SOUND_CMPCI is not set
-+# CONFIG_SOUND_EMU10K1 is not set
-+# CONFIG_MIDI_EMU10K1 is not set
-+# CONFIG_SOUND_FUSION is not set
-+# CONFIG_SOUND_CS4281 is not set
-+# CONFIG_SOUND_ES1370 is not set
-+# CONFIG_SOUND_ES1371 is not set
-+# CONFIG_SOUND_ESSSOLO1 is not set
-+# CONFIG_SOUND_MAESTRO is not set
-+# CONFIG_SOUND_MAESTRO3 is not set
-+# CONFIG_SOUND_FORTE is not set
-+# CONFIG_SOUND_ICH is not set
-+# CONFIG_SOUND_RME96XX is not set
-+# CONFIG_SOUND_SONICVIBES is not set
-+# CONFIG_SOUND_AU1X00 is not set
-+CONFIG_SOUND_AU1550_PSC=y
-+# CONFIG_SOUND_AU1550_I2S is not set
-+# CONFIG_SOUND_TRIDENT is not set
-+# CONFIG_SOUND_MSNDCLAS is not set
-+# CONFIG_SOUND_MSNDPIN is not set
-+# CONFIG_SOUND_VIA82CXXX is not set
-+# CONFIG_MIDI_VIA82CXXX is not set
-+# CONFIG_SOUND_OSS is not set
-+# CONFIG_SOUND_TVMIXER is not set
-+# CONFIG_SOUND_AD1980 is not set
-+# CONFIG_SOUND_WM97XX is not set
-+
-+#
-+# USB support
-+#
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_BANDWIDTH is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_EHCI_HCD is not set
-+# CONFIG_USB_UHCI is not set
-+# CONFIG_USB_UHCI_ALT is not set
-+CONFIG_USB_OHCI=y
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_AUDIO is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_BLUETOOTH is not set
-+# CONFIG_USB_MIDI is not set
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_HP8200e is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+
-+#
-+# USB Human Interface Devices (HID)
-+#
-+CONFIG_USB_HID=y
-+CONFIG_USB_HIDINPUT=y
-+CONFIG_USB_HIDDEV=y
-+# CONFIG_USB_AIPTEK is not set
-+# CONFIG_USB_WACOM is not set
-+# CONFIG_USB_KBTAB is not set
-+# CONFIG_USB_POWERMATE is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_DC2XX is not set
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_SCANNER is not set
-+# CONFIG_USB_MICROTEK is not set
-+# CONFIG_USB_HPUSBSCSI is not set
-+
-+#
-+# USB Multimedia devices
-+#
-+
-+#
-+#   Video4Linux support is needed for USB Multimedia device support
-+#
-+
-+#
-+# USB Network adaptors
-+#
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_CDCETHER is not set
-+# CONFIG_USB_USBNET is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_USS720 is not set
-+
-+#
-+# USB Serial Converter support
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_TIGL is not set
-+# CONFIG_USB_BRLVGER is not set
-+# CONFIG_USB_LCD is not set
-+
-+#
-+# Support for USB gadgets
-+#
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# Bluetooth support
-+#
-+# CONFIG_BLUEZ is not set
-+
-+#
-+# Kernel hacking
-+#
-+CONFIG_CROSSCOMPILE=y
-+# CONFIG_RUNTIME_DEBUG is not set
-+# CONFIG_KGDB is not set
-+# CONFIG_GDB_CONSOLE is not set
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_MIPS_UNCACHED is not set
-+CONFIG_LOG_BUF_SHIFT=0
-+
-+#
-+# Cryptographic options
-+#
-+# CONFIG_CRYPTO is not set
-+
-+#
-+# Library routines
-+#
-+# CONFIG_CRC32 is not set
-+CONFIG_ZLIB_INFLATE=m
-+CONFIG_ZLIB_DEFLATE=m
-+# CONFIG_FW_LOADER is not set
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-pb1500 linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1500
---- linux-2.4.32-rc1/arch/mips/defconfig-pb1500	2005-01-19 15:09:28.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1500	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- CONFIG_MIPS_PB1500=y
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -215,9 +215,7 @@
- # CONFIG_MTD_MTX1 is not set
- CONFIG_MTD_PB1500_BOOT=y
- # CONFIG_MTD_PB1500_USER is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -236,7 +234,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -341,11 +338,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -675,7 +667,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-pb1550 linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1550
---- linux-2.4.32-rc1/arch/mips/defconfig-pb1550	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1550	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- CONFIG_MIPS_PB1550=y
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -213,11 +213,9 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- CONFIG_MTD_PB1550=y
- CONFIG_MTD_PB1550_BOOT=y
- CONFIG_MTD_PB1550_USER=y
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -236,7 +234,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -343,11 +340,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -633,7 +625,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-rbtx4927 linux-2.4.32-rc1.mips/arch/mips/defconfig-rbtx4927
---- linux-2.4.32-rc1/arch/mips/defconfig-rbtx4927	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-rbtx4927	2005-03-18 13:13:21.000000000 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -223,11 +223,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -466,7 +461,6 @@
- CONFIG_SERIAL_TXX9=y
- CONFIG_SERIAL_TXX9_CONSOLE=y
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_UNIX98_PTYS is not set
- 
- #
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-rm200 linux-2.4.32-rc1.mips/arch/mips/defconfig-rm200
---- linux-2.4.32-rc1/arch/mips/defconfig-rm200	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-rm200	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -229,11 +229,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -340,7 +335,6 @@
- # CONFIG_SERIAL is not set
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-sb1250-swarm linux-2.4.32-rc1.mips/arch/mips/defconfig-sb1250-swarm
---- linux-2.4.32-rc1/arch/mips/defconfig-sb1250-swarm	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-sb1250-swarm	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -90,6 +90,7 @@
- # CONFIG_SIBYTE_TBPROF is not set
- CONFIG_SIBYTE_GENBUS_IDE=y
- CONFIG_SMP_CAPABLE=y
-+CONFIG_MIPS_RTC=y
- # CONFIG_SNI_RM200_PCI is not set
- # CONFIG_TANBAC_TB0226 is not set
- # CONFIG_TANBAC_TB0229 is not set
-@@ -253,11 +254,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -469,7 +465,6 @@
- CONFIG_SIBYTE_SB1250_DUART=y
- CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
- CONFIG_SERIAL_CONSOLE=y
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-sead linux-2.4.32-rc1.mips/arch/mips/defconfig-sead
---- linux-2.4.32-rc1/arch/mips/defconfig-sead	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-sead	2005-03-18 13:13:21.000000000 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -244,7 +244,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_UNIX98_PTYS is not set
- 
- #
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-stretch linux-2.4.32-rc1.mips/arch/mips/defconfig-stretch
---- linux-2.4.32-rc1/arch/mips/defconfig-stretch	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-stretch	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -240,11 +240,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -324,9 +319,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -516,7 +513,6 @@
- # CONFIG_SERIAL_TXX9 is not set
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-tb0226 linux-2.4.32-rc1.mips/arch/mips/defconfig-tb0226
---- linux-2.4.32-rc1/arch/mips/defconfig-tb0226	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-tb0226	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -228,11 +228,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -312,9 +307,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -518,7 +515,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-tb0229 linux-2.4.32-rc1.mips/arch/mips/defconfig-tb0229
---- linux-2.4.32-rc1/arch/mips/defconfig-tb0229	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-tb0229	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -230,11 +230,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -445,7 +440,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ti1500 linux-2.4.32-rc1.mips/arch/mips/defconfig-ti1500
---- linux-2.4.32-rc1/arch/mips/defconfig-ti1500	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ti1500	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- CONFIG_MIPS_XXS1500=y
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -213,9 +213,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- CONFIG_MTD_XXS1500=y
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -234,7 +232,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -339,11 +336,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -600,7 +592,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-workpad linux-2.4.32-rc1.mips/arch/mips/defconfig-workpad
---- linux-2.4.32-rc1/arch/mips/defconfig-workpad	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-workpad	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -222,11 +222,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -426,7 +421,6 @@
- # CONFIG_SERIAL_MULTIPORT is not set
- # CONFIG_HUB6 is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-xxs1500 linux-2.4.32-rc1.mips/arch/mips/defconfig-xxs1500
---- linux-2.4.32-rc1/arch/mips/defconfig-xxs1500	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-xxs1500	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- CONFIG_MIPS_XXS1500=y
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -213,9 +213,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- CONFIG_MTD_XXS1500=y
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -234,7 +232,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -339,11 +336,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -671,7 +663,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-yosemite linux-2.4.32-rc1.mips/arch/mips/defconfig-yosemite
---- linux-2.4.32-rc1/arch/mips/defconfig-yosemite	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/defconfig-yosemite	2005-03-18 13:13:21.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -227,11 +227,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -310,9 +305,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -477,7 +474,6 @@
- # CONFIG_SERIAL_TXX9 is not set
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/kernel/cpu-probe.c linux-2.4.32-rc1.mips/arch/mips/kernel/cpu-probe.c
---- linux-2.4.32-rc1/arch/mips/kernel/cpu-probe.c	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/kernel/cpu-probe.c	2005-05-25 15:33:22.000000000 +0200
-@@ -34,21 +34,16 @@
- 		".set\tmips0");
- }
- 
--/* The Au1xxx wait is available only if we run CONFIG_PM and
-- * the timer setup found we had a 32KHz counter available.
-- * There are still problems with functions that may call au1k_wait
-- * directly, but that will be discovered pretty quickly.
-- */
--extern void (*au1k_wait_ptr)(void);
--void au1k_wait(void)
-+/* The Au1xxx wait is available only if using 32khz counter or
-+ * external timer source, but specifically not CP0 Counter. */
-+int allow_au1k_wait; 
-+
-+static void au1k_wait(void)
- {
--#ifdef CONFIG_PM
--	unsigned long addr;
- 	/* using the wait instruction makes CP0 counter unusable */
--	__asm__("la %0,au1k_wait\n\t"
--		".set mips3\n\t"
--		"cache 0x14,0(%0)\n\t"
--		"cache 0x14,32(%0)\n\t"
-+	__asm__(".set mips3\n\t"
-+		"cache 0x14, 0(%0)\n\t"
-+		"cache 0x14, 32(%0)\n\t"
- 		"sync\n\t"
- 		"nop\n\t"
- 		"wait\n\t"
-@@ -57,11 +52,7 @@
- 		"nop\n\t"
- 		"nop\n\t"
- 		".set mips0\n\t"
--		: : "r" (addr));
--#else
--	__asm__("nop\n\t"
--		"nop");
--#endif
-+		: : "r" (au1k_wait));
- }
- 
- static inline void check_wait(void)
-@@ -100,20 +91,17 @@
- 		cpu_wait = r4k_wait;
- 		printk(" available.\n");
- 		break;
--#ifdef CONFIG_PM
- 	case CPU_AU1000:
- 	case CPU_AU1100:
- 	case CPU_AU1500:
- 	case CPU_AU1550:
--		if (au1k_wait_ptr != NULL) {
--			cpu_wait = au1k_wait_ptr;
-+	case CPU_AU1200:
-+		if (allow_au1k_wait) {
-+			cpu_wait = au1k_wait;
- 			printk(" available.\n");
--		}
--		else {
-+		} else
- 			printk(" unavailable.\n");
--		}
- 		break;
--#endif
- 	default:
- 		printk(" unavailable.\n");
- 		break;
-diff -Nur linux-2.4.32-rc1/arch/mips/kernel/head.S linux-2.4.32-rc1.mips/arch/mips/kernel/head.S
---- linux-2.4.32-rc1/arch/mips/kernel/head.S	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/kernel/head.S	2004-11-22 14:38:23.000000000 +0100
-@@ -43,9 +43,9 @@
- 
- 		/* Cache Error */
- 		LEAF(except_vec2_generic)
-+		.set	push
- 		.set	noreorder
- 		.set	noat
--		.set    mips0
- 		/*
- 		 * This is a very bad place to be.  Our cache error
- 		 * detection has triggered.  If we have write-back data
-@@ -64,10 +64,9 @@
- 
- 		j	cache_parity_error
- 		 nop
-+		.set	pop
- 		END(except_vec2_generic)
- 
--		.set	at
--
- 		/*
- 		 * Special interrupt vector for embedded MIPS.  This is a
- 		 * dedicated interrupt vector which reduces interrupt processing
-@@ -76,8 +75,11 @@
- 		 * size!
- 		 */
- 		NESTED(except_vec4, 0, sp)
-+		.set	push
-+		.set	noreorder
- 1:		j	1b			/* Dummy, will be replaced */
- 		 nop
-+		.set	pop
- 		END(except_vec4)
- 
- 		/*
-@@ -87,8 +89,11 @@
- 		 * unconditional jump to this vector.
- 		 */
- 		NESTED(except_vec_ejtag_debug, 0, sp)
-+		.set	push
-+		.set	noreorder
- 		j	ejtag_debug_handler
- 		 nop
-+		.set	pop
- 		END(except_vec_ejtag_debug)
- 
- 		__FINIT
-@@ -97,6 +102,7 @@
- 		 * EJTAG debug exception handler.
- 		 */
- 		NESTED(ejtag_debug_handler, PT_SIZE, sp)
-+		.set	push
- 		.set	noat
- 		.set	noreorder
- 		mtc0	k0, CP0_DESAVE
-@@ -120,7 +126,7 @@
- 		deret
- 		.set	mips0
- 		 nop
--		.set	at
-+		.set	pop
- 		END(ejtag_debug_handler)
- 
- 		__INIT
-@@ -132,13 +138,17 @@
- 		* unconditional jump to this vector.
- 		*/
- 		NESTED(except_vec_nmi, 0, sp)
-+		.set	push
-+		.set	noreorder
- 		j       nmi_handler
- 		 nop
-+		.set	pop
- 		END(except_vec_nmi)
- 
- 		__FINIT
- 
- 		NESTED(nmi_handler, PT_SIZE, sp)
-+		.set	push
- 		.set    noat
- 		.set    noreorder
- 		.set    mips3
-@@ -147,8 +157,7 @@
- 		 move   a0, sp
- 		RESTORE_ALL
- 		eret
--		.set    at
--		.set    mips0
-+		.set	pop
- 		END(nmi_handler)
- 
- 		__INIT
-@@ -157,7 +166,20 @@
- 		 * Kernel entry point
- 		 */
- 		NESTED(kernel_entry, 16, sp)
-+		.set	push
-+		/*
-+		 * For the moment disable interrupts and mark the kernel mode.
-+		 * A full initialization of the CPU's status register is done
-+		 * later in per_cpu_trap_init().
-+		 */
-+		mfc0	t0, CP0_STATUS
-+		or	t0, ST0_CU0|0x1f
-+		xor	t0, 0x1f
-+		mtc0	t0, CP0_STATUS
-+
- 		.set	noreorder
-+		sll	zero,3				# ehb
-+		.set	reorder
- 
- 		/*
- 		 * The firmware/bootloader passes argc/argp/envp
-@@ -170,8 +192,8 @@
- 		la	t1, (_end - 4)
- 1:
- 		addiu	t0, 4
-+		sw	zero, (t0)
- 		bne	t0, t1, 1b
--		 sw	zero, (t0)
- 
- 		/*
- 		 * Stack for kernel and init, current variable
-@@ -182,7 +204,7 @@
- 		sw	t0, kernelsp
- 
- 		jal	init_arch
--		 nop
-+		.set	pop
- 		END(kernel_entry)
- 
- 
-@@ -193,17 +215,26 @@
-  * function after setting up the stack and gp registers.
-  */
- 		LEAF(smp_bootstrap)
--		.set push
--		.set noreorder
--		mtc0	zero, CP0_WIRED
--		CLI
-+		.set	push
-+		/*
-+		 * For the moment disable interrupts and bootstrap exception
-+		 * vectors and mark the kernel mode.  A full initialization of
-+		 * the CPU's status register is done later in
-+		 * per_cpu_trap_init().
-+		 */
- 		mfc0	t0, CP0_STATUS
--		li	t1, ~(ST0_CU1|ST0_CU2|ST0_CU3|ST0_KX|ST0_SX|ST0_UX)
--		and	t0, t1
--		or	t0, (ST0_CU0);
-+		or	t0, ST0_CU0|ST0_BEV|0x1f
-+		xor	t0, ST0_BEV|0x1f
-+		mtc0	t0, CP0_STATUS
-+
-+		.set	noreorder
-+		sll	zero,3				# ehb
-+		.set	reorder
-+
-+		mtc0	zero, CP0_WIRED
-+
- 		jal	start_secondary
--		 mtc0	t0, CP0_STATUS
--		.set pop
-+		.set	pop
- 		END(smp_bootstrap)
- #endif
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/kernel/process.c linux-2.4.32-rc1.mips/arch/mips/kernel/process.c
---- linux-2.4.32-rc1/arch/mips/kernel/process.c	2003-08-25 13:44:40.000000000 +0200
-+++ linux-2.4.32-rc1.mips/arch/mips/kernel/process.c	2005-04-14 12:41:44.000000000 +0200
-@@ -128,6 +128,26 @@
- 	return 1;
- }
- 
-+void dump_regs(elf_greg_t *gp, struct pt_regs *regs)
-+{
-+	int i;
-+
-+	for (i = 0; i < EF_REG0; i++)
-+		gp[i] = 0;
-+	gp[EF_REG0] = 0;
-+	for (i = 1; i <= 31; i++)
-+		gp[EF_REG0 + i] = regs->regs[i];
-+	gp[EF_REG26] = 0;
-+	gp[EF_REG27] = 0;
-+	gp[EF_LO] = regs->lo;
-+	gp[EF_HI] = regs->hi;
-+	gp[EF_CP0_EPC] = regs->cp0_epc;
-+	gp[EF_CP0_BADVADDR] = regs->cp0_badvaddr;
-+	gp[EF_CP0_STATUS] = regs->cp0_status;
-+	gp[EF_CP0_CAUSE] = regs->cp0_cause;
-+	gp[EF_UNUSED0] = 0;
-+}
-+
- /*
-  * Create a kernel thread
-  */
-diff -Nur linux-2.4.32-rc1/arch/mips/kernel/scall_o32.S linux-2.4.32-rc1.mips/arch/mips/kernel/scall_o32.S
---- linux-2.4.32-rc1/arch/mips/kernel/scall_o32.S	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/kernel/scall_o32.S	2005-02-07 22:21:53.000000000 +0100
-@@ -121,15 +121,14 @@
- 
- trace_a_syscall:
- 	SAVE_STATIC
--	sw	t2, PT_R1(sp)
-+	move	s0, t2
- 	jal	syscall_trace
--	lw	t2, PT_R1(sp)
- 
- 	lw	a0, PT_R4(sp)		# Restore argument registers
- 	lw	a1, PT_R5(sp)
- 	lw	a2, PT_R6(sp)
- 	lw	a3, PT_R7(sp)
--	jalr	t2
-+	jalr	s0
- 
- 	li	t0, -EMAXERRNO - 1	# error?
- 	sltu	t0, t0, v0
-diff -Nur linux-2.4.32-rc1/arch/mips/kernel/setup.c linux-2.4.32-rc1.mips/arch/mips/kernel/setup.c
---- linux-2.4.32-rc1/arch/mips/kernel/setup.c	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/kernel/setup.c	2005-01-13 22:15:57.000000000 +0100
-@@ -5,7 +5,7 @@
-  *
-  * Copyright (C) 1995  Linus Torvalds
-  * Copyright (C) 1995  Waldorf Electronics
-- * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001  Ralf Baechle
-+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 01, 05  Ralf Baechle
-  * Copyright (C) 1996  Stoned Elipot
-  * Copyright (C) 2000, 2001, 2002  Maciej W. Rozycki
-  */
-@@ -71,6 +71,8 @@
- extern struct rtc_ops no_rtc_ops;
- struct rtc_ops *rtc_ops;
- 
-+EXPORT_SYMBOL(rtc_ops);
-+
- #ifdef CONFIG_PC_KEYB
- struct kbd_ops *kbd_ops;
- #endif
-@@ -132,10 +134,6 @@
- 	 */
- 	load_mmu();
- 
--	/* Disable coprocessors and set FPU for 16/32 FPR register model */
--	clear_c0_status(ST0_CU1|ST0_CU2|ST0_CU3|ST0_KX|ST0_SX|ST0_FR);
--	set_c0_status(ST0_CU0);
--
- 	start_kernel();
- }
- 
-diff -Nur linux-2.4.32-rc1/arch/mips/kernel/traps.c linux-2.4.32-rc1.mips/arch/mips/kernel/traps.c
---- linux-2.4.32-rc1/arch/mips/kernel/traps.c	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/kernel/traps.c	2005-04-12 22:25:34.000000000 +0200
-@@ -452,9 +452,10 @@
- 	}
- 	ll_task = current;
- 
-+	compute_return_epc(regs);
-+
- 	regs->regs[(opcode & RT) >> 16] = value;
- 
--	compute_return_epc(regs);
- 	return;
- 
- sig:
-@@ -485,8 +486,8 @@
- 		goto sig;
- 	}
- 	if (ll_bit == 0 || ll_task != current) {
--		regs->regs[reg] = 0;
- 		compute_return_epc(regs);
-+		regs->regs[reg] = 0;
- 		return;
- 	}
- 
-@@ -495,9 +496,9 @@
- 		goto sig;
- 	}
- 
-+	compute_return_epc(regs);
- 	regs->regs[reg] = 1;
- 
--	compute_return_epc(regs);
- 	return;
- 
- sig:
-@@ -887,12 +888,18 @@
- void __init per_cpu_trap_init(void)
- {
- 	unsigned int cpu = smp_processor_id();
-+	unsigned int status_set = ST0_CU0;
- 
--	/* Some firmware leaves the BEV flag set, clear it.  */
--	clear_c0_status(ST0_CU3|ST0_CU2|ST0_CU1|ST0_BEV|ST0_KX|ST0_SX|ST0_UX);
--
-+	/*
-+	 * Disable coprocessors and 64-bit addressing and set FPU for
-+	 * the 16/32 FPR register model.  Reset the BEV flag that some
-+	 * firmware may have left set and the TS bit (for IP27).  Set
-+	 * XX for ISA IV code to work.
-+	 */
- 	if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
--		set_c0_status(ST0_XX);
-+		status_set |= ST0_XX;
-+	change_c0_status(ST0_CU|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
-+			 status_set);
- 
- 	/*
- 	 * Some MIPS CPUs have a dedicated interrupt vector which reduces the
-@@ -902,7 +909,7 @@
- 		set_c0_cause(CAUSEF_IV);
- 
- 	cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
--	write_c0_context(cpu << 23);
-+	TLBMISS_HANDLER_SETUP();
- 
- 	atomic_inc(&init_mm.mm_count);
- 	current->active_mm = &init_mm;
-@@ -918,8 +925,6 @@
- 	extern char except_vec4;
- 	unsigned long i;
- 
--	per_cpu_trap_init();
--
- 	/* Copy the generic exception handler code to it's final destination. */
- 	memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
- 
-@@ -1020,10 +1025,5 @@
- 
- 	flush_icache_range(KSEG0, KSEG0 + 0x400);
- 
--	atomic_inc(&init_mm.mm_count);	/* XXX UP?  */
--	current->active_mm = &init_mm;
--
--	/* XXX Must be done for all CPUs  */
--	current_cpu_data.asid_cache = ASID_FIRST_VERSION;
--	TLBMISS_HANDLER_SETUP();
-+	per_cpu_trap_init();
- }
-diff -Nur linux-2.4.32-rc1/arch/mips/lib/rtc-no.c linux-2.4.32-rc1.mips/arch/mips/lib/rtc-no.c
---- linux-2.4.32-rc1/arch/mips/lib/rtc-no.c	2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/lib/rtc-no.c	2005-01-13 22:15:57.000000000 +0100
-@@ -6,10 +6,9 @@
-  * Stub RTC routines to keep Linux from crashing on machine which don't
-  * have a RTC chip.
-  *
-- * Copyright (C) 1998, 2001 by Ralf Baechle
-+ * Copyright (C) 1998, 2001, 2005 by Ralf Baechle
-  */
- #include <linux/kernel.h>
--#include <linux/module.h>
- #include <linux/mc146818rtc.h>
- 
- static unsigned int shouldnt_happen(void)
-@@ -29,5 +28,3 @@
-     .rtc_write_data = (void *) &shouldnt_happen,
-     .rtc_bcd_mode   = (void *) &shouldnt_happen
- };
--
--EXPORT_SYMBOL(rtc_ops);
-diff -Nur linux-2.4.32-rc1/arch/mips/lib/rtc-std.c linux-2.4.32-rc1.mips/arch/mips/lib/rtc-std.c
---- linux-2.4.32-rc1/arch/mips/lib/rtc-std.c	2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/lib/rtc-std.c	2005-01-13 22:15:57.000000000 +0100
-@@ -5,9 +5,8 @@
-  *
-  * RTC routines for PC style attached Dallas chip.
-  *
-- * Copyright (C) 1998, 2001 by Ralf Baechle
-+ * Copyright (C) 1998, 2001, 05 by Ralf Baechle
-  */
--#include <linux/module.h>
- #include <linux/mc146818rtc.h>
- #include <asm/io.h>
- 
-@@ -33,5 +32,3 @@
- 	&std_rtc_write_data,
- 	&std_rtc_bcd_mode
- };
--
--EXPORT_SYMBOL(rtc_ops);
-diff -Nur linux-2.4.32-rc1/arch/mips/Makefile linux-2.4.32-rc1.mips/arch/mips/Makefile
---- linux-2.4.32-rc1/arch/mips/Makefile	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/Makefile	2005-01-30 09:01:26.000000000 +0100
-@@ -211,7 +211,7 @@
- endif
- 
- #
--# Au1000 (Alchemy Semi PB1000) eval board
-+# Au1x AMD Alchemy eval boards
- #
- ifdef CONFIG_MIPS_PB1000
- LIBS		+= arch/mips/au1000/pb1000/pb1000.o \
-@@ -220,9 +220,6 @@
- LOADADDR	:= 0x80100000
- endif
- 
--#
--# Au1100 (Alchemy Semi PB1100) eval board
--#
- ifdef CONFIG_MIPS_PB1100
- LIBS          += arch/mips/au1000/pb1100/pb1100.o \
-                  arch/mips/au1000/common/au1000.o
-@@ -230,9 +227,6 @@
- LOADADDR      += 0x80100000
- endif
- 
--#
--# Au1500 (Alchemy Semi PB1500) eval board
--#
- ifdef CONFIG_MIPS_PB1500
- LIBS		+= arch/mips/au1000/pb1500/pb1500.o \
- 		   arch/mips/au1000/common/au1000.o
-@@ -240,9 +234,6 @@
- LOADADDR	:= 0x80100000
- endif
- 
--#
--# Au1x00 (AMD/Alchemy) eval boards
--#
- ifdef CONFIG_MIPS_DB1000
- LIBS          += arch/mips/au1000/db1x00/db1x00.o \
-                  arch/mips/au1000/common/au1000.o
-@@ -313,6 +304,27 @@
- LOADADDR      += 0x80100000
- endif
- 
-+ifdef CONFIG_MIPS_PB1200
-+LIBS          += arch/mips/au1000/pb1200/pb1200.o \
-+                 arch/mips/au1000/common/au1000.o
-+SUBDIRS       += arch/mips/au1000/pb1200 arch/mips/au1000/common
-+LOADADDR      += 0x80100000
-+endif
-+
-+ifdef CONFIG_MIPS_DB1200
-+LIBS          += arch/mips/au1000/pb1200/pb1200.o \
-+                 arch/mips/au1000/common/au1000.o
-+SUBDIRS       += arch/mips/au1000/pb1200 arch/mips/au1000/common
-+LOADADDR      += 0x80100000
-+endif
-+
-+ifdef CONFIG_MIPS_FICMMP
-+LIBS          += arch/mips/au1000/ficmmp/ficmmp.o \
-+                 arch/mips/au1000/common/au1000.o
-+SUBDIRS       += arch/mips/au1000/ficmmp arch/mips/au1000/common
-+LOADADDR      += 0x80100000
-+endif
-+
- 
- #
- # Cogent CSB250
-diff -Nur linux-2.4.32-rc1/arch/mips/mm/cerr-sb1.c linux-2.4.32-rc1.mips/arch/mips/mm/cerr-sb1.c
---- linux-2.4.32-rc1/arch/mips/mm/cerr-sb1.c	2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/mm/cerr-sb1.c	2004-12-13 18:37:23.000000000 +0100
-@@ -252,14 +252,14 @@
- 
- /* Masks to select bits for Hamming parity, mask_72_64[i] for bit[i] */
- static const uint64_t mask_72_64[8] = {
--	0x0738C808099264FFL,
--	0x38C808099264FF07L,
--	0xC808099264FF0738L,
--	0x08099264FF0738C8L,
--	0x099264FF0738C808L,
--	0x9264FF0738C80809L,
--	0x64FF0738C8080992L,
--	0xFF0738C808099264L
-+	0x0738C808099264FFULL,
-+	0x38C808099264FF07ULL,
-+	0xC808099264FF0738ULL,
-+	0x08099264FF0738C8ULL,
-+	0x099264FF0738C808ULL,
-+	0x9264FF0738C80809ULL,
-+	0x64FF0738C8080992ULL,
-+	0xFF0738C808099264ULL
- };
- 
- /* Calculate the parity on a range of bits */
-@@ -331,9 +331,9 @@
- 				    ((lru >> 4) & 0x3),
- 				    ((lru >> 6) & 0x3));
- 		}
--		va = (taglo & 0xC0000FFFFFFFE000) | addr;
-+		va = (taglo & 0xC0000FFFFFFFE000ULL) | addr;
- 		if ((taglo & (1 << 31)) && (((taglo >> 62) & 0x3) == 3))
--			va |= 0x3FFFF00000000000;
-+			va |= 0x3FFFF00000000000ULL;
- 		valid = ((taghi >> 29) & 1);
- 		if (valid) {
- 			tlo_tmp = taglo & 0xfff3ff;
-@@ -474,7 +474,7 @@
- 		: "r" ((way << 13) | addr));
- 
- 		taglo = ((unsigned long long)taglohi << 32) | taglolo;
--		pa = (taglo & 0xFFFFFFE000) | addr;
-+		pa = (taglo & 0xFFFFFFE000ULL) | addr;
- 		if (way == 0) {
- 			lru = (taghi >> 14) & 0xff;
- 			prom_printf("[Bank %d Set 0x%02x]  LRU > %d %d %d %d > MRU\n",
-diff -Nur linux-2.4.32-rc1/arch/mips/mm/c-r4k.c linux-2.4.32-rc1.mips/arch/mips/mm/c-r4k.c
---- linux-2.4.32-rc1/arch/mips/mm/c-r4k.c	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/mm/c-r4k.c	2005-02-06 22:55:42.000000000 +0100
-@@ -867,9 +867,16 @@
- 	 * normally they'd suffer from aliases but magic in the hardware deals
- 	 * with that for us so we don't need to take care ourselves.
- 	 */
--	if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000)
--		if (c->dcache.waysize > PAGE_SIZE)
--		        c->dcache.flags |= MIPS_CACHE_ALIASES;
-+	switch (c->cputype) {
-+	case CPU_R10000:
-+	case CPU_R12000:
-+		break;
-+	case CPU_24K:
-+		if (!(read_c0_config7() & (1 << 16)))
-+	default:
-+			if (c->dcache.waysize > PAGE_SIZE)
-+				c->dcache.flags |= MIPS_CACHE_ALIASES;
-+	}
- 
- 	switch (c->cputype) {
- 	case CPU_20KC:
-@@ -1069,9 +1076,6 @@
- 	probe_pcache();
- 	setup_scache();
- 
--	if (c->dcache.sets * c->dcache.ways > PAGE_SIZE)
--		c->dcache.flags |= MIPS_CACHE_ALIASES;
--
- 	r4k_blast_dcache_page_setup();
- 	r4k_blast_dcache_page_indexed_setup();
- 	r4k_blast_dcache_setup();
-diff -Nur linux-2.4.32-rc1/arch/mips/mm/tlbex-mips32.S linux-2.4.32-rc1.mips/arch/mips/mm/tlbex-mips32.S
---- linux-2.4.32-rc1/arch/mips/mm/tlbex-mips32.S	2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/mm/tlbex-mips32.S	2004-11-29 00:33:15.000000000 +0100
-@@ -196,7 +196,7 @@
- 	.set	noat; \
- 	SAVE_ALL; \
- 	mfc0	a2, CP0_BADVADDR; \
--	STI; \
-+	KMODE; \
- 	.set	at; \
- 	move	a0, sp; \
- 	jal	do_page_fault; \
-diff -Nur linux-2.4.32-rc1/arch/mips/mm/tlbex-r4k.S linux-2.4.32-rc1.mips/arch/mips/mm/tlbex-r4k.S
---- linux-2.4.32-rc1/arch/mips/mm/tlbex-r4k.S	2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/mm/tlbex-r4k.S	2005-06-06 16:46:22.000000000 +0200
-@@ -184,13 +184,10 @@
- 	P_MTC0	k0, CP0_ENTRYLO0		# load it
- 	PTE_SRL	k1, k1, 6			# convert to entrylo1
- 	P_MTC0	k1, CP0_ENTRYLO1		# load it
--	b	1f
--	rm9000_tlb_hazard
-+	mtc0_tlbw_hazard
- 	tlbwr					# write random tlb entry
--1:
--	nop
--	rm9000_tlb_hazard
--	eret					# return from trap
-+	tlbw_eret_hazard
-+	eret
- 	END(except_vec0_r4000)
- 
- 	/* TLB refill, EXL == 0, R4600 version */
-@@ -468,13 +465,9 @@
- 	PTE_PRESENT(k0, k1, nopage_tlbl)
- 	PTE_MAKEVALID(k0, k1)
- 	PTE_RELOAD(k1, k0)
--	rm9000_tlb_hazard
--	nop
--	b	1f
--	 tlbwi
--1:
--	nop
--	rm9000_tlb_hazard
-+	mtc0_tlbw_hazard
-+	tlbwi
-+	tlbw_eret_hazard
- 	.set	mips3
- 	eret
- 	.set	mips0
-@@ -496,13 +489,9 @@
- 	PTE_WRITABLE(k0, k1, nopage_tlbs)
- 	PTE_MAKEWRITE(k0, k1)
- 	PTE_RELOAD(k1, k0)
--	rm9000_tlb_hazard
--	nop
--	b	1f
--	 tlbwi
--1:
--	nop
--	rm9000_tlb_hazard
-+	mtc0_tlbw_hazard
-+	tlbwi
-+	tlbw_eret_hazard
- 	.set	mips3
- 	eret
- 	.set	mips0
-@@ -529,13 +518,9 @@
- 
- 	/* Now reload the entry into the tlb. */
- 	PTE_RELOAD(k1, k0)
--	rm9000_tlb_hazard
--	nop
--	b	1f
--	 tlbwi
--1:
--	rm9000_tlb_hazard
--	nop
-+	mtc0_tlbw_hazard
-+	tlbwi
-+	tlbw_eret_hazard
- 	.set	mips3
- 	eret
- 	.set	mips0
-diff -Nur linux-2.4.32-rc1/arch/mips/mm/tlb-r4k.c linux-2.4.32-rc1.mips/arch/mips/mm/tlb-r4k.c
---- linux-2.4.32-rc1/arch/mips/mm/tlb-r4k.c	2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips/mm/tlb-r4k.c	2004-11-25 23:18:38.000000000 +0100
-@@ -3,17 +3,12 @@
-  * License.  See the file "COPYING" in the main directory of this archive
-  * for more details.
-  *
-- * r4xx0.c: R4000 processor variant specific MMU/Cache routines.
-- *
-  * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
-  * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle ralf@gnu.org
-- *
-- * To do:
-- *
-- *  - this code is a overbloated pig
-- *  - many of the bug workarounds are not efficient at all, but at
-- *    least they are functional ...
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
-  */
-+#include <linux/config.h>
- #include <linux/init.h>
- #include <linux/sched.h>
- #include <linux/mm.h>
-@@ -25,9 +20,6 @@
- #include <asm/pgtable.h>
- #include <asm/system.h>
- 
--#undef DEBUG_TLB
--#undef DEBUG_TLBUPDATE
--
- extern char except_vec0_nevada, except_vec0_r4000, except_vec0_r4600;
- 
- /* CP0 hazard avoidance. */
-@@ -41,33 +33,23 @@
- 	unsigned long old_ctx;
- 	int entry;
- 
--#ifdef DEBUG_TLB
--	printk("[tlball]");
--#endif
--
- 	local_irq_save(flags);
- 	/* Save old context and create impossible VPN2 value */
- 	old_ctx = read_c0_entryhi();
- 	write_c0_entrylo0(0);
- 	write_c0_entrylo1(0);
--	BARRIER;
- 
- 	entry = read_c0_wired();
- 
- 	/* Blast 'em all away. */
- 	while (entry < current_cpu_data.tlbsize) {
--		/*
--		 * Make sure all entries differ.  If they're not different
--		 * MIPS32 will take revenge ...
--		 */
- 		write_c0_entryhi(KSEG0 + entry*0x2000);
- 		write_c0_index(entry);
--		BARRIER;
-+		mtc0_tlbw_hazard();
- 		tlb_write_indexed();
--		BARRIER;
- 		entry++;
- 	}
--	BARRIER;
-+	tlbw_use_hazard();
- 	write_c0_entryhi(old_ctx);
- 	local_irq_restore(flags);
- }
-@@ -76,12 +58,8 @@
- {
- 	int cpu = smp_processor_id();
- 
--	if (cpu_context(cpu, mm) != 0) {
--#ifdef DEBUG_TLB
--		printk("[tlbmm<%d>]", cpu_context(cpu, mm));
--#endif
-+	if (cpu_context(cpu, mm) != 0)
- 		drop_mmu_context(mm,cpu);
--	}
- }
- 
- void local_flush_tlb_range(struct mm_struct *mm, unsigned long start,
-@@ -93,10 +71,6 @@
- 		unsigned long flags;
- 		int size;
- 
--#ifdef DEBUG_TLB
--		printk("[tlbrange<%02x,%08lx,%08lx>]",
--		       cpu_asid(cpu, mm), start, end);
--#endif
- 		local_irq_save(flags);
- 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- 		size = (size + 1) >> 1;
-@@ -112,7 +86,7 @@
- 
- 				write_c0_entryhi(start | newpid);
- 				start += (PAGE_SIZE << 1);
--				BARRIER;
-+				mtc0_tlbw_hazard();
- 				tlb_probe();
- 				BARRIER;
- 				idx = read_c0_index();
-@@ -122,10 +96,10 @@
- 					continue;
- 				/* Make sure all entries differ. */
- 				write_c0_entryhi(KSEG0 + idx*0x2000);
--				BARRIER;
-+				mtc0_tlbw_hazard();
- 				tlb_write_indexed();
--				BARRIER;
- 			}
-+			tlbw_use_hazard();
- 			write_c0_entryhi(oldpid);
- 		} else {
- 			drop_mmu_context(mm, cpu);
-@@ -138,34 +112,30 @@
- {
- 	int cpu = smp_processor_id();
- 
--	if (!vma || cpu_context(cpu, vma->vm_mm) != 0) {
-+	if (cpu_context(cpu, vma->vm_mm) != 0) {
- 		unsigned long flags;
--		int oldpid, newpid, idx;
-+		unsigned long oldpid, newpid, idx;
- 
--#ifdef DEBUG_TLB
--		printk("[tlbpage<%d,%08lx>]", cpu_context(cpu, vma->vm_mm),
--		       page);
--#endif
- 		newpid = cpu_asid(cpu, vma->vm_mm);
- 		page &= (PAGE_MASK << 1);
- 		local_irq_save(flags);
- 		oldpid = read_c0_entryhi();
- 		write_c0_entryhi(page | newpid);
--		BARRIER;
-+		mtc0_tlbw_hazard();
- 		tlb_probe();
- 		BARRIER;
- 		idx = read_c0_index();
- 		write_c0_entrylo0(0);
- 		write_c0_entrylo1(0);
--		if(idx < 0)
-+		if (idx < 0)
- 			goto finish;
- 		/* Make sure all entries differ. */
- 		write_c0_entryhi(KSEG0+idx*0x2000);
--		BARRIER;
-+		mtc0_tlbw_hazard();
- 		tlb_write_indexed();
-+		tlbw_use_hazard();
- 
- 	finish:
--		BARRIER;
- 		write_c0_entryhi(oldpid);
- 		local_irq_restore(flags);
- 	}
-@@ -185,7 +155,7 @@
- 
- 	local_irq_save(flags);
- 	write_c0_entryhi(page);
--	BARRIER;
-+	mtc0_tlbw_hazard();
- 	tlb_probe();
- 	BARRIER;
- 	idx = read_c0_index();
-@@ -194,18 +164,19 @@
- 	if (idx >= 0) {
- 		/* Make sure all entries differ. */
- 		write_c0_entryhi(KSEG0+idx*0x2000);
-+		mtc0_tlbw_hazard();
- 		tlb_write_indexed();
-+		tlbw_use_hazard();
- 	}
--	BARRIER;
- 	write_c0_entryhi(oldpid);
-+
- 	local_irq_restore(flags);
- }
- 
- EXPORT_SYMBOL(local_flush_tlb_one);
- 
--/* We will need multiple versions of update_mmu_cache(), one that just
-- * updates the TLB with the new pte(s), and another which also checks
-- * for the R4k "end of page" hardware bug and does the needy.
-+/*
-+ * Updates the TLB with the new pte(s).
-  */
- void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
- {
-@@ -223,25 +194,16 @@
- 
- 	pid = read_c0_entryhi() & ASID_MASK;
- 
--#ifdef DEBUG_TLB
--	if ((pid != cpu_asid(cpu, vma->vm_mm)) ||
--	    (cpu_context(vma->vm_mm) == 0)) {
--		printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%d "
--		       "tlbpid=%d\n", (int) (cpu_asid(cpu, vma->vm_mm)), pid);
--	}
--#endif
--
- 	local_irq_save(flags);
- 	address &= (PAGE_MASK << 1);
- 	write_c0_entryhi(address | pid);
- 	pgdp = pgd_offset(vma->vm_mm, address);
--	BARRIER;
-+	mtc0_tlbw_hazard();
- 	tlb_probe();
- 	BARRIER;
- 	pmdp = pmd_offset(pgdp, address);
- 	idx = read_c0_index();
- 	ptep = pte_offset(pmdp, address);
--	BARRIER;
- #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
- 	write_c0_entrylo0(ptep->pte_high);
- 	ptep++;
-@@ -251,15 +213,13 @@
- 	write_c0_entrylo1(pte_val(*ptep) >> 6);
- #endif
- 	write_c0_entryhi(address | pid);
--	BARRIER;
--	if (idx < 0) {
-+	mtc0_tlbw_hazard();
-+	if (idx < 0)
- 		tlb_write_random();
--	} else {
-+	else
- 		tlb_write_indexed();
--	}
--	BARRIER;
-+	tlbw_use_hazard();
- 	write_c0_entryhi(pid);
--	BARRIER;
- 	local_irq_restore(flags);
- }
- 
-@@ -279,24 +239,26 @@
- 	asid = read_c0_entryhi() & ASID_MASK;
- 	write_c0_entryhi(address | asid);
- 	pgdp = pgd_offset(vma->vm_mm, address);
-+	mtc0_tlbw_hazard();
- 	tlb_probe();
-+	BARRIER;
- 	pmdp = pmd_offset(pgdp, address);
- 	idx = read_c0_index();
- 	ptep = pte_offset(pmdp, address);
- 	write_c0_entrylo0(pte_val(*ptep++) >> 6);
- 	write_c0_entrylo1(pte_val(*ptep) >> 6);
--	BARRIER;
-+	mtc0_tlbw_hazard();
- 	if (idx < 0)
- 		tlb_write_random();
- 	else
- 		tlb_write_indexed();
--	BARRIER;
-+	tlbw_use_hazard();
- 	local_irq_restore(flags);
- }
- #endif
- 
- void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
--		     unsigned long entryhi, unsigned long pagemask)
-+			    unsigned long entryhi, unsigned long pagemask)
- {
- 	unsigned long flags;
- 	unsigned long wired;
-@@ -315,9 +277,9 @@
- 	write_c0_entryhi(entryhi);
- 	write_c0_entrylo0(entrylo0);
- 	write_c0_entrylo1(entrylo1);
--	BARRIER;
-+	mtc0_tlbw_hazard();
- 	tlb_write_indexed();
--	BARRIER;
-+	tlbw_use_hazard();
- 
- 	write_c0_entryhi(old_ctx);
- 	BARRIER;
-@@ -355,17 +317,15 @@
- 	}
- 
- 	write_c0_index(temp_tlb_entry);
--	BARRIER;
- 	write_c0_pagemask(pagemask);
- 	write_c0_entryhi(entryhi);
- 	write_c0_entrylo0(entrylo0);
- 	write_c0_entrylo1(entrylo1);
--	BARRIER;
-+	mtc0_tlbw_hazard();
- 	tlb_write_indexed();
--	BARRIER;
-+	tlbw_use_hazard();
- 
- 	write_c0_entryhi(old_ctx);
--	BARRIER;
- 	write_c0_pagemask(old_pagemask);
- out:
- 	local_irq_restore(flags);
-@@ -375,7 +335,7 @@
- static void __init probe_tlb(unsigned long config)
- {
- 	struct cpuinfo_mips *c = &current_cpu_data;
--	unsigned int reg;
-+	unsigned int config1;
- 
- 	/*
- 	 * If this isn't a MIPS32 / MIPS64 compliant CPU.  Config 1 register
-@@ -385,16 +345,16 @@
- 	if ((c->processor_id  & 0xff0000) == PRID_COMP_LEGACY)
- 		return;
- 
--	reg = read_c0_config1();
-+	config1 = read_c0_config1();
- 	if (!((config >> 7) & 3))
- 		panic("No TLB present");
- 
--	c->tlbsize = ((reg >> 25) & 0x3f) + 1;
-+	c->tlbsize = ((config1 >> 25) & 0x3f) + 1;
- }
- 
- void __init r4k_tlb_init(void)
- {
--	u32 config = read_c0_config();
-+	unsigned int config = read_c0_config();
- 
- 	/*
- 	 * You should never change this register:
-diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig linux-2.4.32-rc1.mips/arch/mips64/defconfig
---- linux-2.4.32-rc1/arch/mips64/defconfig	2005-01-19 15:09:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/defconfig	2005-03-18 13:13:23.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -470,9 +470,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -658,7 +660,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-atlas linux-2.4.32-rc1.mips/arch/mips64/defconfig-atlas
---- linux-2.4.32-rc1/arch/mips64/defconfig-atlas	2005-01-19 15:09:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-atlas	2005-03-18 13:13:23.000000000 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -232,11 +232,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -314,9 +309,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -474,7 +471,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-decstation linux-2.4.32-rc1.mips/arch/mips64/defconfig-decstation
---- linux-2.4.32-rc1/arch/mips64/defconfig-decstation	2005-01-19 15:09:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-decstation	2005-03-18 13:13:23.000000000 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -224,11 +224,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -307,9 +302,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -477,7 +474,6 @@
- CONFIG_SERIAL_DEC_CONSOLE=y
- # CONFIG_DZ is not set
- CONFIG_ZS=y
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-ip22 linux-2.4.32-rc1.mips/arch/mips64/defconfig-ip22
---- linux-2.4.32-rc1/arch/mips64/defconfig-ip22	2005-01-19 15:09:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-ip22	2005-03-18 13:13:23.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -235,11 +235,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -319,9 +314,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -488,7 +485,6 @@
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- # CONFIG_TXX927_SERIAL is not set
- CONFIG_IP22_SERIAL=y
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-ip27 linux-2.4.32-rc1.mips/arch/mips64/defconfig-ip27
---- linux-2.4.32-rc1/arch/mips64/defconfig-ip27	2005-01-19 15:09:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-ip27	2005-03-18 13:13:23.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -470,9 +470,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -658,7 +660,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-jaguar linux-2.4.32-rc1.mips/arch/mips64/defconfig-jaguar
---- linux-2.4.32-rc1/arch/mips64/defconfig-jaguar	2005-01-19 15:09:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-jaguar	2005-03-18 13:13:23.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -227,11 +227,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -403,7 +398,6 @@
- # CONFIG_SERIAL_TXX9 is not set
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-malta linux-2.4.32-rc1.mips/arch/mips64/defconfig-malta
---- linux-2.4.32-rc1/arch/mips64/defconfig-malta	2005-01-19 15:09:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-malta	2005-04-19 14:19:34.000000000 +0200
-@@ -22,16 +22,19 @@
- #
- # CONFIG_ACER_PICA_61 is not set
- # CONFIG_MIPS_BOSPORUS is not set
-+# CONFIG_MIPS_FICMMP is not set
- # CONFIG_MIPS_MIRAGE is not set
- # CONFIG_MIPS_DB1000 is not set
- # CONFIG_MIPS_DB1100 is not set
- # CONFIG_MIPS_DB1500 is not set
- # CONFIG_MIPS_DB1550 is not set
-+# CONFIG_MIPS_DB1200 is not set
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_PB1200 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -146,9 +149,9 @@
- CONFIG_BINFMT_ELF=y
- CONFIG_MIPS32_COMPAT=y
- CONFIG_MIPS32_O32=y
--# CONFIG_MIPS32_N32 is not set
-+CONFIG_MIPS32_N32=y
- CONFIG_BINFMT_ELF32=y
--# CONFIG_BINFMT_MISC is not set
-+CONFIG_BINFMT_MISC=y
- # CONFIG_OOM_KILLER is not set
- # CONFIG_CMDLINE_BOOL is not set
- 
-@@ -235,11 +238,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -271,8 +269,83 @@
- #
- # ATA/IDE/MFM/RLL support
- #
--# CONFIG_IDE is not set
-+CONFIG_IDE=y
-+
-+#
-+# IDE, ATA and ATAPI Block devices
-+#
-+CONFIG_BLK_DEV_IDE=y
-+
-+#
-+# Please see Documentation/ide.txt for help/info on IDE drives
-+#
-+# CONFIG_BLK_DEV_HD_IDE is not set
- # CONFIG_BLK_DEV_HD is not set
-+# CONFIG_BLK_DEV_IDE_SATA is not set
-+CONFIG_BLK_DEV_IDEDISK=y
-+# CONFIG_IDEDISK_MULTI_MODE is not set
-+# CONFIG_IDEDISK_STROKE is not set
-+# CONFIG_BLK_DEV_IDECS is not set
-+# CONFIG_BLK_DEV_DELKIN is not set
-+CONFIG_BLK_DEV_IDECD=y
-+CONFIG_BLK_DEV_IDETAPE=y
-+CONFIG_BLK_DEV_IDEFLOPPY=y
-+# CONFIG_BLK_DEV_IDESCSI is not set
-+# CONFIG_IDE_TASK_IOCTL is not set
-+
-+#
-+# IDE chipset support/bugfixes
-+#
-+# CONFIG_BLK_DEV_CMD640 is not set
-+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-+# CONFIG_BLK_DEV_ISAPNP is not set
-+CONFIG_BLK_DEV_IDEPCI=y
-+CONFIG_BLK_DEV_GENERIC=y
-+CONFIG_IDEPCI_SHARE_IRQ=y
-+CONFIG_BLK_DEV_IDEDMA_PCI=y
-+# CONFIG_BLK_DEV_OFFBOARD is not set
-+CONFIG_BLK_DEV_IDEDMA_FORCED=y
-+CONFIG_IDEDMA_PCI_AUTO=y
-+# CONFIG_IDEDMA_ONLYDISK is not set
-+CONFIG_BLK_DEV_IDEDMA=y
-+# CONFIG_IDEDMA_PCI_WIP is not set
-+# CONFIG_BLK_DEV_ADMA100 is not set
-+# CONFIG_BLK_DEV_AEC62XX is not set
-+# CONFIG_BLK_DEV_ALI15X3 is not set
-+# CONFIG_WDC_ALI15X3 is not set
-+# CONFIG_BLK_DEV_AMD74XX is not set
-+# CONFIG_AMD74XX_OVERRIDE is not set
-+# CONFIG_BLK_DEV_ATIIXP is not set
-+# CONFIG_BLK_DEV_CMD64X is not set
-+# CONFIG_BLK_DEV_TRIFLEX is not set
-+# CONFIG_BLK_DEV_CY82C693 is not set
-+# CONFIG_BLK_DEV_CS5530 is not set
-+# CONFIG_BLK_DEV_HPT34X is not set
-+# CONFIG_HPT34X_AUTODMA is not set
-+# CONFIG_BLK_DEV_HPT366 is not set
-+CONFIG_BLK_DEV_PIIX=y
-+# CONFIG_BLK_DEV_NS87415 is not set
-+# CONFIG_BLK_DEV_OPTI621 is not set
-+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-+# CONFIG_PDC202XX_BURST is not set
-+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-+# CONFIG_BLK_DEV_RZ1000 is not set
-+# CONFIG_BLK_DEV_SC1200 is not set
-+# CONFIG_BLK_DEV_SVWKS is not set
-+# CONFIG_BLK_DEV_SIIMAGE is not set
-+# CONFIG_BLK_DEV_SIS5513 is not set
-+# CONFIG_BLK_DEV_SLC90E66 is not set
-+# CONFIG_BLK_DEV_TRM290 is not set
-+# CONFIG_BLK_DEV_VIA82CXXX is not set
-+# CONFIG_IDE_CHIPSETS is not set
-+CONFIG_IDEDMA_AUTO=y
-+# CONFIG_IDEDMA_IVB is not set
-+# CONFIG_DMA_NONPCI is not set
-+# CONFIG_BLK_DEV_ATARAID is not set
-+# CONFIG_BLK_DEV_ATARAID_PDC is not set
-+# CONFIG_BLK_DEV_ATARAID_HPT is not set
-+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-+# CONFIG_BLK_DEV_ATARAID_SII is not set
- 
- #
- # SCSI support
-@@ -317,9 +390,11 @@
- # CONFIG_SCSI_MEGARAID is not set
- # CONFIG_SCSI_MEGARAID2 is not set
- # CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_SATA_AHCI is not set
- # CONFIG_SCSI_SATA_SVW is not set
- # CONFIG_SCSI_ATA_PIIX is not set
- # CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -477,7 +552,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-ocelotc linux-2.4.32-rc1.mips/arch/mips64/defconfig-ocelotc
---- linux-2.4.32-rc1/arch/mips64/defconfig-ocelotc	2005-01-19 15:09:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-ocelotc	2005-03-18 13:13:23.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -231,11 +231,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -453,7 +448,6 @@
- # CONFIG_SERIAL_TXX9 is not set
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-sb1250-swarm linux-2.4.32-rc1.mips/arch/mips64/defconfig-sb1250-swarm
---- linux-2.4.32-rc1/arch/mips64/defconfig-sb1250-swarm	2005-01-19 15:09:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-sb1250-swarm	2005-03-18 13:13:23.000000000 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -90,6 +90,7 @@
- # CONFIG_SIBYTE_TBPROF is not set
- CONFIG_SIBYTE_GENBUS_IDE=y
- CONFIG_SMP_CAPABLE=y
-+CONFIG_MIPS_RTC=y
- # CONFIG_SNI_RM200_PCI is not set
- # CONFIG_TANBAC_TB0226 is not set
- # CONFIG_TANBAC_TB0229 is not set
-@@ -253,11 +254,6 @@
- #
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
--
--#
--# Appletalk devices
--#
--# CONFIG_DEV_APPLETALK is not set
- # CONFIG_DECNET is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_X25 is not set
-@@ -432,7 +428,6 @@
- CONFIG_SIBYTE_SB1250_DUART=y
- CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
- CONFIG_SERIAL_CONSOLE=y
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
- 
-diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-sead linux-2.4.32-rc1.mips/arch/mips64/defconfig-sead
---- linux-2.4.32-rc1/arch/mips64/defconfig-sead	2005-01-19 15:09:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-sead	2005-03-18 13:13:23.000000000 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -242,7 +242,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_UNIX98_PTYS is not set
- 
- #
-diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/binfmt_elfn32.c linux-2.4.32-rc1.mips/arch/mips64/kernel/binfmt_elfn32.c
---- linux-2.4.32-rc1/arch/mips64/kernel/binfmt_elfn32.c	2003-08-25 13:44:40.000000000 +0200
-+++ linux-2.4.32-rc1.mips/arch/mips64/kernel/binfmt_elfn32.c	2005-01-26 03:40:47.000000000 +0100
-@@ -116,4 +116,7 @@
- #undef MODULE_DESCRIPTION
- #undef MODULE_AUTHOR
- 
-+#undef TASK_SIZE
-+#define TASK_SIZE TASK_SIZE32
-+
- #include "../../../fs/binfmt_elf.c"
-diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/binfmt_elfo32.c linux-2.4.32-rc1.mips/arch/mips64/kernel/binfmt_elfo32.c
---- linux-2.4.32-rc1/arch/mips64/kernel/binfmt_elfo32.c	2003-08-25 13:44:40.000000000 +0200
-+++ linux-2.4.32-rc1.mips/arch/mips64/kernel/binfmt_elfo32.c	2005-01-26 03:40:47.000000000 +0100
-@@ -137,4 +137,7 @@
- #undef MODULE_DESCRIPTION
- #undef MODULE_AUTHOR
- 
-+#undef TASK_SIZE
-+#define TASK_SIZE TASK_SIZE32
-+
- #include "../../../fs/binfmt_elf.c"
-diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/head.S linux-2.4.32-rc1.mips/arch/mips64/kernel/head.S
---- linux-2.4.32-rc1/arch/mips64/kernel/head.S	2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/kernel/head.S	2004-11-22 14:38:26.000000000 +0100
-@@ -91,6 +91,21 @@
- 	__INIT
- 
- NESTED(kernel_entry, 16, sp)			# kernel entry point
-+	.set	push
-+	/*
-+	 * For the moment disable interrupts, mark the kernel mode and
-+	 * set ST0_KX so that the CPU does not spit fire when using
-+	 * 64-bit addresses.  A full initialization of the CPU's status
-+	 * register is done later in per_cpu_trap_init().
-+	 */
-+	mfc0	t0, CP0_STATUS
-+	or	t0, ST0_CU0|ST0_KX|0x1f
-+	xor	t0, 0x1f
-+	mtc0	t0, CP0_STATUS
-+
-+	.set	noreorder
-+	sll	zero,3				# ehb
-+	.set	reorder
- 
- 	ori	sp, 0xf				# align stack on 16 byte.
- 	xori	sp, 0xf
-@@ -103,8 +118,6 @@
- 
- 	ARC64_TWIDDLE_PC
- 
--	CLI					# disable interrupts
--
- 	/*
- 	 * The firmware/bootloader passes argc/argp/envp
- 	 * to us as arguments.  But clear bss first because
-@@ -125,6 +138,7 @@
- 	dsubu	sp, 4*SZREG			# init stack pointer
- 
- 	j	init_arch
-+	.set	pop
- 	END(kernel_entry)
- 
- #ifdef CONFIG_SMP
-@@ -133,6 +147,23 @@
-  * function after setting up the stack and gp registers.
-  */
- NESTED(smp_bootstrap, 16, sp)
-+	.set	push
-+	/*
-+	 * For the moment disable interrupts and bootstrap exception
-+	 * vectors, mark the kernel mode and set ST0_KX so that the CPU
-+	 * does not spit fire when using 64-bit addresses.  A full
-+	 * initialization of the CPU's status register is done later in
-+	 * per_cpu_trap_init().
-+	 */
-+	mfc0	t0, CP0_STATUS
-+	or	t0, ST0_CU0|ST0_BEV|ST0_KX|0x1f
-+	xor	t0, ST0_BEV|0x1f
-+	mtc0	t0, CP0_STATUS
-+
-+	.set	noreorder
-+	sll	zero,3				# ehb
-+	.set	reorder
-+
- #ifdef CONFIG_SGI_IP27
- 	GET_NASID_ASM	t1
- 	dli	t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \
-@@ -146,19 +177,8 @@
- 	ARC64_TWIDDLE_PC
- #endif /* CONFIG_SGI_IP27 */
- 
--	CLI
--
--	/*
--	 * For the moment set ST0_KU so the CPU will not spit fire when
--	 * executing 64-bit instructions.  The full initialization of the
--	 * CPU's status register is done later in per_cpu_trap_init().
--	 */
--        mfc0	t0, CP0_STATUS
--        or	t0, ST0_KX
--	mtc0	t0, CP0_STATUS
--
- 	jal	start_secondary			# XXX: IP27: cboot
--
-+	.set	pop
- 	END(smp_bootstrap)
- #endif /* CONFIG_SMP */
- 
-diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/ioctl32.c linux-2.4.32-rc1.mips/arch/mips64/kernel/ioctl32.c
---- linux-2.4.32-rc1/arch/mips64/kernel/ioctl32.c	2005-01-19 15:09:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/kernel/ioctl32.c	2005-01-26 03:36:17.000000000 +0100
-@@ -2352,7 +2352,7 @@
- 	IOCTL32_HANDLER(AUTOFS_IOC_SETTIMEOUT32, ioc_settimeout),
- 	IOCTL32_DEFAULT(AUTOFS_IOC_EXPIRE),
- 	IOCTL32_DEFAULT(AUTOFS_IOC_EXPIRE_MULTI),
--	IOCTL32_DEFAULT(AUTOFS_IOC_PROTSUBVER),
-+	IOCTL32_DEFAULT(AUTOFS_IOC_PROTOSUBVER),
- 	IOCTL32_DEFAULT(AUTOFS_IOC_ASKREGHOST),
- 	IOCTL32_DEFAULT(AUTOFS_IOC_TOGGLEREGHOST),
- 	IOCTL32_DEFAULT(AUTOFS_IOC_ASKUMOUNT),
-diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/linux32.c linux-2.4.32-rc1.mips/arch/mips64/kernel/linux32.c
---- linux-2.4.32-rc1/arch/mips64/kernel/linux32.c	2005-04-04 03:42:19.000000000 +0200
-+++ linux-2.4.32-rc1.mips/arch/mips64/kernel/linux32.c	2005-04-22 15:01:00.000000000 +0200
-@@ -1101,6 +1101,7 @@
- 	 * specially as they have atomicity guarantees and can handle
- 	 * iovec's natively
- 	 */
-+	inode = file->f_dentry->d_inode;
- 	if (inode->i_sock) {
- 		int err;
- 		err = sock_readv_writev(type, inode, file, iov, count, tot_len);
-@@ -1187,72 +1188,19 @@
-    lseek back to original location.  They fail just like lseek does on
-    non-seekable files.  */
- 
--asmlinkage ssize_t sys32_pread(unsigned int fd, char * buf,
--			       size_t count, u32 unused, u64 a4, u64 a5)
-+asmlinkage ssize_t sys32_pread(unsigned int fd, char *buf,
-+                                 size_t count, u32 unused, u64 a4, u64 a5)
- {
--	ssize_t ret;
--	struct file * file;
--	ssize_t (*read)(struct file *, char *, size_t, loff_t *);
--	loff_t pos;
--
--	ret = -EBADF;
--	file = fget(fd);
--	if (!file)
--		goto bad_file;
--	if (!(file->f_mode & FMODE_READ))
--		goto out;
--	pos = merge_64(a4, a5);
--	ret = locks_verify_area(FLOCK_VERIFY_READ, file->f_dentry->d_inode,
--				file, pos, count);
--	if (ret)
--		goto out;
--	ret = -EINVAL;
--	if (!file->f_op || !(read = file->f_op->read))
--		goto out;
--	if (pos < 0)
--		goto out;
--	ret = read(file, buf, count, &pos);
--	if (ret > 0)
--		dnotify_parent(file->f_dentry, DN_ACCESS);
--out:
--	fput(file);
--bad_file:
--	return ret;
-+	return sys_pread(fd, buf, count, merge_64(a4, a5));
- }
- 
- asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char * buf,
- 			        size_t count, u32 unused, u64 a4, u64 a5)
- {
--	ssize_t ret;
--	struct file * file;
--	ssize_t (*write)(struct file *, const char *, size_t, loff_t *);
--	loff_t pos;
-+	return sys_pwrite(fd, buf, count, merge_64(a4, a5));
-+}
- 
--	ret = -EBADF;
--	file = fget(fd);
--	if (!file)
--		goto bad_file;
--	if (!(file->f_mode & FMODE_WRITE))
--		goto out;
--	pos = merge_64(a4, a5);
--	ret = locks_verify_area(FLOCK_VERIFY_WRITE, file->f_dentry->d_inode,
--				file, pos, count);
--	if (ret)
--		goto out;
--	ret = -EINVAL;
--	if (!file->f_op || !(write = file->f_op->write))
--		goto out;
--	if (pos < 0)
--		goto out;
- 
--	ret = write(file, buf, count, &pos);
--	if (ret > 0)
--		dnotify_parent(file->f_dentry, DN_MODIFY);
--out:
--	fput(file);
--bad_file:
--	return ret;
--}
- /*
-  * Ooo, nasty.  We need here to frob 32-bit unsigned longs to
-  * 64-bit unsigned longs.
-diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/process.c linux-2.4.32-rc1.mips/arch/mips64/kernel/process.c
---- linux-2.4.32-rc1/arch/mips64/kernel/process.c	2003-08-25 13:44:40.000000000 +0200
-+++ linux-2.4.32-rc1.mips/arch/mips64/kernel/process.c	2005-04-14 12:41:44.000000000 +0200
-@@ -125,6 +125,25 @@
- 	return 1;
- }
- 
-+void dump_regs(elf_greg_t *gp, struct pt_regs *regs)
-+{
-+	int i;
-+
-+	for (i = 0; i < EF_REG0; i++)
-+		gp[i] = 0;
-+	gp[EF_REG0] = 0;
-+	for (i = 1; i <= 31; i++)
-+		gp[EF_REG0 + i] = regs->regs[i];
-+	gp[EF_REG26] = 0;
-+	gp[EF_REG27] = 0;
-+	gp[EF_LO] = regs->lo;
-+	gp[EF_HI] = regs->hi;
-+	gp[EF_CP0_EPC] = regs->cp0_epc;
-+	gp[EF_CP0_BADVADDR] = regs->cp0_badvaddr;
-+	gp[EF_CP0_STATUS] = regs->cp0_status;
-+	gp[EF_CP0_CAUSE] = regs->cp0_cause;
-+}
-+
- /*
-  * Create a kernel thread
-  */
-diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/scall_64.S linux-2.4.32-rc1.mips/arch/mips64/kernel/scall_64.S
---- linux-2.4.32-rc1/arch/mips64/kernel/scall_64.S	2005-01-19 15:09:32.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/kernel/scall_64.S	2005-02-07 22:21:54.000000000 +0100
-@@ -102,15 +102,14 @@
- 
- trace_a_syscall:
- 	SAVE_STATIC
--	sd	t2,PT_R1(sp)
-+	move	s0, t2
- 	jal	syscall_trace
--	ld	t2,PT_R1(sp)
- 
- 	ld	a0, PT_R4(sp)		# Restore argument registers
- 	ld	a1, PT_R5(sp)
- 	ld	a2, PT_R6(sp)
- 	ld	a3, PT_R7(sp)
--	jalr	t2
-+	jalr	s0
- 
- 	li	t0, -EMAXERRNO - 1	# error?
- 	sltu	t0, t0, v0
-diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/scall_n32.S linux-2.4.32-rc1.mips/arch/mips64/kernel/scall_n32.S
---- linux-2.4.32-rc1/arch/mips64/kernel/scall_n32.S	2005-01-19 15:09:32.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/kernel/scall_n32.S	2005-02-07 22:21:54.000000000 +0100
-@@ -106,15 +106,14 @@
- 
- trace_a_syscall:
- 	SAVE_STATIC
--	sd	t2,PT_R1(sp)
-+	move	s0, t2
- 	jal	syscall_trace
--	ld	t2,PT_R1(sp)
- 
- 	ld	a0, PT_R4(sp)		# Restore argument registers
- 	ld	a1, PT_R5(sp)
- 	ld	a2, PT_R6(sp)
- 	ld	a3, PT_R7(sp)
--	jalr	t2
-+	jalr	s0
- 
- 	li	t0, -EMAXERRNO - 1	# error?
- 	sltu	t0, t0, v0
-diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/scall_o32.S linux-2.4.32-rc1.mips/arch/mips64/kernel/scall_o32.S
---- linux-2.4.32-rc1/arch/mips64/kernel/scall_o32.S	2005-01-19 15:09:32.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/kernel/scall_o32.S	2005-02-14 04:52:57.000000000 +0100
-@@ -118,9 +118,8 @@
- 	sd	a6, PT_R10(sp)
- 	sd	a7, PT_R11(sp)
- 
--	sd	t2,PT_R1(sp)
-+	move	s0, t2
- 	jal	syscall_trace
--	ld	t2,PT_R1(sp)
- 
- 	ld	a0, PT_R4(sp)		# Restore argument registers
- 	ld	a1, PT_R5(sp)
-@@ -129,7 +128,7 @@
- 	ld	a4, PT_R8(sp)
- 	ld	a5, PT_R9(sp)
- 
--	jalr	t2
-+	jalr	s0
- 
- 	li	t0, -EMAXERRNO - 1	# error?
- 	sltu	t0, t0, v0
-@@ -576,6 +575,8 @@
- sys_call_table:
- 	syscalltable
- 
-+	.purgem	sys
-+
- 	.macro	sys function, nargs
- 	.byte	\nargs
- 	.endm
-diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/setup.c linux-2.4.32-rc1.mips/arch/mips64/kernel/setup.c
---- linux-2.4.32-rc1/arch/mips64/kernel/setup.c	2005-01-19 15:09:32.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/kernel/setup.c	2004-11-22 14:38:26.000000000 +0100
-@@ -129,14 +129,6 @@
- 	 */
- 	load_mmu();
- 
--	/*
--	 * On IP27, I am seeing the TS bit set when the kernel is loaded.
--	 * Maybe because the kernel is in ckseg0 and not xkphys? Clear it
--	 * anyway ...
--	 */
--	clear_c0_status(ST0_BEV|ST0_TS|ST0_CU1|ST0_CU2|ST0_CU3);
--	set_c0_status(ST0_CU0|ST0_KX|ST0_SX|ST0_FR);
--
- 	start_kernel();
- }
- 
-diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/signal_n32.c linux-2.4.32-rc1.mips/arch/mips64/kernel/signal_n32.c
---- linux-2.4.32-rc1/arch/mips64/kernel/signal_n32.c	2005-01-19 15:09:33.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/kernel/signal_n32.c	2005-02-07 22:10:53.000000000 +0100
-@@ -68,7 +68,7 @@
- };
- 
- extern asmlinkage int restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc);
--extern int inline setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc);
-+extern int setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc);
- 
- asmlinkage void sysn32_rt_sigreturn(abi64_no_regargs, struct pt_regs regs)
- {
-diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/traps.c linux-2.4.32-rc1.mips/arch/mips64/kernel/traps.c
---- linux-2.4.32-rc1/arch/mips64/kernel/traps.c	2005-01-19 15:09:33.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/kernel/traps.c	2005-04-12 22:25:34.000000000 +0200
-@@ -462,9 +462,10 @@
- 	}
- 	ll_task = current;
- 
-+	compute_return_epc(regs);
-+
- 	regs->regs[(opcode & RT) >> 16] = value;
- 
--	compute_return_epc(regs);
- 	return;
- 
- sig:
-@@ -495,8 +496,8 @@
- 		goto sig;
- 	}
- 	if (ll_bit == 0 || ll_task != current) {
--		regs->regs[reg] = 0;
- 		compute_return_epc(regs);
-+		regs->regs[reg] = 0;
- 		return;
- 	}
- 
-@@ -505,9 +506,9 @@
- 		goto sig;
- 	}
- 
-+	compute_return_epc(regs);
- 	regs->regs[reg] = 1;
- 
--	compute_return_epc(regs);
- 	return;
- 
- sig:
-@@ -809,13 +810,18 @@
- void __init per_cpu_trap_init(void)
- {
- 	unsigned int cpu = smp_processor_id();
-+	unsigned int status_set = ST0_CU0|ST0_FR|ST0_KX|ST0_SX|ST0_UX;
- 
--	/* Some firmware leaves the BEV flag set, clear it.  */
--	clear_c0_status(ST0_CU1|ST0_CU2|ST0_CU3|ST0_BEV);
--	set_c0_status(ST0_CU0|ST0_FR|ST0_KX|ST0_SX|ST0_UX);
--
-+	/*
-+	 * Disable coprocessors, enable 64-bit addressing and set FPU
-+	 * for the 32/32 FPR register model.  Reset the BEV flag that
-+	 * some firmware may have left set and the TS bit (for IP27).
-+	 * Set XX for ISA IV code to work.
-+	 */
- 	if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
--		set_c0_status(ST0_XX);
-+		status_set |= ST0_XX;
-+	change_c0_status(ST0_CU|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
-+			 status_set);
- 
- 	/*
- 	 * Some MIPS CPUs have a dedicated interrupt vector which reduces the
-@@ -825,13 +831,11 @@
- 		set_c0_cause(CAUSEF_IV);
- 
- 	cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
--	write_c0_context(((long)(&pgd_current[cpu])) << 23);
--	write_c0_wired(0);
-+	TLBMISS_HANDLER_SETUP();
- 
- 	atomic_inc(&init_mm.mm_count);
- 	current->active_mm = &init_mm;
--	if (current->mm)
--		BUG();
-+	BUG_ON(current->mm);
- 	enter_lazy_tlb(&init_mm, current, cpu);
- }
- 
-@@ -842,8 +846,6 @@
- 	extern char except_vec4;
- 	unsigned long i;
- 
--	per_cpu_trap_init();
--
- 	/* Copy the generic exception handlers to their final destination. */
- 	memcpy((void *) KSEG0         , &except_vec0_generic, 0x80);
- 	memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80);
-@@ -933,6 +935,5 @@
- 
- 	flush_icache_range(KSEG0, KSEG0 + 0x400);
- 
--	atomic_inc(&init_mm.mm_count);	/* XXX UP?  */
--	current->active_mm = &init_mm;
-+	per_cpu_trap_init();
- }
-diff -Nur linux-2.4.32-rc1/arch/mips64/mm/cerr-sb1.c linux-2.4.32-rc1.mips/arch/mips64/mm/cerr-sb1.c
---- linux-2.4.32-rc1/arch/mips64/mm/cerr-sb1.c	2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/mm/cerr-sb1.c	2004-12-13 18:37:26.000000000 +0100
-@@ -252,14 +252,14 @@
- 
- /* Masks to select bits for Hamming parity, mask_72_64[i] for bit[i] */
- static const uint64_t mask_72_64[8] = {
--	0x0738C808099264FFL,
--	0x38C808099264FF07L,
--	0xC808099264FF0738L,
--	0x08099264FF0738C8L,
--	0x099264FF0738C808L,
--	0x9264FF0738C80809L,
--	0x64FF0738C8080992L,
--	0xFF0738C808099264L
-+	0x0738C808099264FFULL,
-+	0x38C808099264FF07ULL,
-+	0xC808099264FF0738ULL,
-+	0x08099264FF0738C8ULL,
-+	0x099264FF0738C808ULL,
-+	0x9264FF0738C80809ULL,
-+	0x64FF0738C8080992ULL,
-+	0xFF0738C808099264ULL
- };
- 
- /* Calculate the parity on a range of bits */
-@@ -331,9 +331,9 @@
- 				    ((lru >> 4) & 0x3),
- 				    ((lru >> 6) & 0x3));
- 		}
--		va = (taglo & 0xC0000FFFFFFFE000) | addr;
-+		va = (taglo & 0xC0000FFFFFFFE000ULL) | addr;
- 		if ((taglo & (1 << 31)) && (((taglo >> 62) & 0x3) == 3))
--			va |= 0x3FFFF00000000000;
-+			va |= 0x3FFFF00000000000ULL;
- 		valid = ((taghi >> 29) & 1);
- 		if (valid) {
- 			tlo_tmp = taglo & 0xfff3ff;
-@@ -474,7 +474,7 @@
- 		: "r" ((way << 13) | addr));
- 
- 		taglo = ((unsigned long long)taglohi << 32) | taglolo;
--		pa = (taglo & 0xFFFFFFE000) | addr;
-+		pa = (taglo & 0xFFFFFFE000ULL) | addr;
- 		if (way == 0) {
- 			lru = (taghi >> 14) & 0xff;
- 			prom_printf("[Bank %d Set 0x%02x]  LRU > %d %d %d %d > MRU\n",
-diff -Nur linux-2.4.32-rc1/arch/mips64/mm/c-r4k.c linux-2.4.32-rc1.mips/arch/mips64/mm/c-r4k.c
---- linux-2.4.32-rc1/arch/mips64/mm/c-r4k.c	2005-01-19 15:09:33.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/mm/c-r4k.c	2005-02-06 22:55:42.000000000 +0100
-@@ -867,9 +867,16 @@
- 	 * normally they'd suffer from aliases but magic in the hardware deals
- 	 * with that for us so we don't need to take care ourselves.
- 	 */
--	if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000)
--		if (c->dcache.waysize > PAGE_SIZE)
--		        c->dcache.flags |= MIPS_CACHE_ALIASES;
-+	switch (c->cputype) {
-+	case CPU_R10000:
-+	case CPU_R12000:
-+		break;
-+	case CPU_24K:
-+		if (!(read_c0_config7() & (1 << 16)))
-+	default:
-+			if (c->dcache.waysize > PAGE_SIZE)
-+				c->dcache.flags |= MIPS_CACHE_ALIASES;
-+	}
- 
- 	switch (c->cputype) {
- 	case CPU_20KC:
-@@ -1070,9 +1077,6 @@
- 	setup_scache();
- 	coherency_setup();
- 
--	if (c->dcache.sets * c->dcache.ways > PAGE_SIZE)
--		c->dcache.flags |= MIPS_CACHE_ALIASES;
--
- 	r4k_blast_dcache_page_setup();
- 	r4k_blast_dcache_page_indexed_setup();
- 	r4k_blast_dcache_setup();
-diff -Nur linux-2.4.32-rc1/arch/mips64/mm/tlbex-r4k.S linux-2.4.32-rc1.mips/arch/mips64/mm/tlbex-r4k.S
---- linux-2.4.32-rc1/arch/mips64/mm/tlbex-r4k.S	2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/mm/tlbex-r4k.S	2005-06-06 16:46:22.000000000 +0200
-@@ -125,6 +125,33 @@
- 	 nop
- END(except_vec1_r4k)
- 
-+	__FINIT
-+
-+	.align  5
-+LEAF(handle_vec1_r4k)
-+	.set    noat
-+	LOAD_PTE2 k1 k0 9f
-+	ld	k0, 0(k1)			# get even pte
-+	ld	k1, 8(k1)			# get odd pte
-+	PTE_RELOAD k0 k1
-+	mtc0_tlbw_hazard
-+	tlbwr
-+	tlbw_eret_hazard
-+	eret
-+
-+9:						# handle the vmalloc range
-+	LOAD_KPTE2 k1 k0 invalid_vmalloc_address
-+	ld	k0, 0(k1)			# get even pte
-+	ld	k1, 8(k1)			# get odd pte
-+	PTE_RELOAD k0 k1
-+	mtc0_tlbw_hazard
-+	tlbwr
-+	tlbw_eret_hazard
-+	eret
-+END(handle_vec1_r4k)
-+
-+	__INIT
-+
- LEAF(except_vec1_sb1)
- #if BCM1250_M3_WAR
- 	dmfc0	k0, CP0_BADVADDR
-@@ -134,28 +161,24 @@
- 	bnez	k0, 1f
- #endif
- 	.set    noat
--	dla     k0, handle_vec1_r4k
-+	dla     k0, handle_vec1_sb1
- 	jr      k0
- 	 nop
- 
- 1:	eret
--	nop
- END(except_vec1_sb1)
- 
- 	__FINIT
- 
- 	.align  5
--LEAF(handle_vec1_r4k)
-+LEAF(handle_vec1_sb1)
- 	.set    noat
- 	LOAD_PTE2 k1 k0 9f
- 	ld	k0, 0(k1)			# get even pte
- 	ld	k1, 8(k1)			# get odd pte
- 	PTE_RELOAD k0 k1
--	rm9000_tlb_hazard
--	b	1f
--	 tlbwr
--1:	nop
--	rm9000_tlb_hazard
-+	mtc0_tlbw_hazard
-+	tlbwr
- 	eret
- 
- 9:						# handle the vmalloc range
-@@ -163,13 +186,10 @@
- 	ld	k0, 0(k1)			# get even pte
- 	ld	k1, 8(k1)			# get odd pte
- 	PTE_RELOAD k0 k1
--	rm9000_tlb_hazard
--	b	1f
--	 tlbwr
--1:	nop
--	rm9000_tlb_hazard
-+	mtc0_tlbw_hazard
-+	tlbwr
- 	eret
--END(handle_vec1_r4k)
-+END(handle_vec1_sb1)
- 
- 
- 	__INIT
-@@ -195,10 +215,8 @@
- 	ld	k0, 0(k1)			# get even pte
- 	ld	k1, 8(k1)			# get odd pte
- 	PTE_RELOAD k0 k1
--	rm9000_tlb_hazard
--	nop
-+	mtc0_tlbw_hazard
- 	tlbwr
--	rm9000_tlb_hazard
- 	eret
- 
- 9:						# handle the vmalloc range
-@@ -206,10 +224,8 @@
- 	ld	k0, 0(k1)			# get even pte
- 	ld	k1, 8(k1)			# get odd pte
- 	PTE_RELOAD k0 k1
--	rm9000_tlb_hazard
--	nop
-+	mtc0_tlbw_hazard
- 	tlbwr
--	rm9000_tlb_hazard
- 	eret
- END(handle_vec1_r10k)
- 
-diff -Nur linux-2.4.32-rc1/arch/mips64/mm/tlb-r4k.c linux-2.4.32-rc1.mips/arch/mips64/mm/tlb-r4k.c
---- linux-2.4.32-rc1/arch/mips64/mm/tlb-r4k.c	2005-01-19 15:09:33.000000000 +0100
-+++ linux-2.4.32-rc1.mips/arch/mips64/mm/tlb-r4k.c	2004-11-25 23:18:38.000000000 +0100
-@@ -1,24 +1,12 @@
- /*
-- * Carsten Langgaard, carstenl@mips.com
-- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
-- *
-- * This program is free software; you can distribute it and/or modify it
-- * under the terms of the GNU General Public License (Version 2) as
-- * published by the Free Software Foundation.
-- *
-- * This program is distributed in the hope it will be useful, but WITHOUT
-- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-  * for more details.
-  *
-- * You should have received a copy of the GNU General Public License along
-- * with this program; if not, write to the Free Software Foundation, Inc.,
-- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-- *
-- * MIPS64 CPU variant specific MMU routines.
-- * These routine are not optimized in any way, they are done in a generic way
-- * so they can be used on all MIPS64 compliant CPUs, and also done in an
-- * attempt not to break anything for the R4xx0 style CPUs.
-+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
-+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle ralf@gnu.org
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
-  */
- #include <linux/init.h>
- #include <linux/sched.h>
-@@ -30,9 +18,6 @@
- #include <asm/pgtable.h>
- #include <asm/system.h>
- 
--#undef DEBUG_TLB
--#undef DEBUG_TLBUPDATE
--
- extern void except_vec1_r4k(void);
- 
- /* CP0 hazard avoidance. */
-@@ -46,31 +31,23 @@
- 	unsigned long old_ctx;
- 	int entry;
- 
--#ifdef DEBUG_TLB
--	printk("[tlball]");
--#endif
--
- 	local_irq_save(flags);
- 	/* Save old context and create impossible VPN2 value */
- 	old_ctx = read_c0_entryhi();
--	write_c0_entryhi(XKPHYS);
- 	write_c0_entrylo0(0);
- 	write_c0_entrylo1(0);
--	BARRIER;
- 
- 	entry = read_c0_wired();
- 
- 	/* Blast 'em all away. */
--	while(entry < current_cpu_data.tlbsize) {
--	        /* Make sure all entries differ. */
--	        write_c0_entryhi(XKPHYS+entry*0x2000);
-+	while (entry < current_cpu_data.tlbsize) {
-+	        write_c0_entryhi(XKPHYS + entry*0x2000);
- 		write_c0_index(entry);
--		BARRIER;
-+		mtc0_tlbw_hazard();
- 		tlb_write_indexed();
--		BARRIER;
- 		entry++;
- 	}
--	BARRIER;
-+	tlbw_use_hazard();
- 	write_c0_entryhi(old_ctx);
- 	local_irq_restore(flags);
- }
-@@ -79,12 +56,8 @@
- {
- 	int cpu = smp_processor_id();
- 
--	if (cpu_context(cpu, mm) != 0) {
--#ifdef DEBUG_TLB
--		printk("[tlbmm<%d>]", mm->context);
--#endif
-+	if (cpu_context(cpu, mm) != 0)
- 		drop_mmu_context(mm,cpu);
--	}
- }
- 
- void local_flush_tlb_range(struct mm_struct *mm, unsigned long start,
-@@ -96,10 +69,6 @@
- 		unsigned long flags;
- 		int size;
- 
--#ifdef DEBUG_TLB
--		printk("[tlbrange<%02x,%08lx,%08lx>]", (mm->context & ASID_MASK),
--		       start, end);
--#endif
- 		local_irq_save(flags);
- 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- 		size = (size + 1) >> 1;
-@@ -110,25 +79,25 @@
- 			start &= (PAGE_MASK << 1);
- 			end += ((PAGE_SIZE << 1) - 1);
- 			end &= (PAGE_MASK << 1);
--			while(start < end) {
-+			while (start < end) {
- 				int idx;
- 
- 				write_c0_entryhi(start | newpid);
- 				start += (PAGE_SIZE << 1);
--				BARRIER;
-+				mtc0_tlbw_hazard();
- 				tlb_probe();
- 				BARRIER;
- 				idx = read_c0_index();
- 				write_c0_entrylo0(0);
- 				write_c0_entrylo1(0);
--				if(idx < 0)
-+				if (idx < 0)
- 					continue;
- 				/* Make sure all entries differ. */
- 				write_c0_entryhi(XKPHYS+idx*0x2000);
--				BARRIER;
-+				mtc0_tlbw_hazard();
- 				tlb_write_indexed();
--				BARRIER;
- 			}
-+			tlbw_use_hazard();
- 			write_c0_entryhi(oldpid);
- 		} else {
- 			drop_mmu_context(mm, cpu);
-@@ -145,28 +114,26 @@
- 		unsigned long flags;
- 		unsigned long oldpid, newpid, idx;
- 
--#ifdef DEBUG_TLB
--		printk("[tlbpage<%d,%08lx>]", vma->vm_mm->context, page);
--#endif
- 		newpid = cpu_asid(cpu, vma->vm_mm);
- 		page &= (PAGE_MASK << 1);
- 		local_irq_save(flags);
- 		oldpid = read_c0_entryhi();
- 		write_c0_entryhi(page | newpid);
--		BARRIER;
-+		mtc0_tlbw_hazard();
- 		tlb_probe();
- 		BARRIER;
- 		idx = read_c0_index();
- 		write_c0_entrylo0(0);
- 		write_c0_entrylo1(0);
--		if(idx < 0)
-+		if (idx < 0)
- 			goto finish;
- 		/* Make sure all entries differ. */
- 		write_c0_entryhi(XKPHYS+idx*0x2000);
--		BARRIER;
-+		mtc0_tlbw_hazard();
- 		tlb_write_indexed();
-+		tlbw_use_hazard();
-+
- 	finish:
--		BARRIER;
- 		write_c0_entryhi(oldpid);
- 		local_irq_restore(flags);
- 	}
-@@ -186,7 +153,7 @@
- 
- 	local_irq_save(flags);
- 	write_c0_entryhi(page);
--	BARRIER;
-+	mtc0_tlbw_hazard();
- 	tlb_probe();
- 	BARRIER;
- 	idx = read_c0_index();
-@@ -195,10 +162,12 @@
- 	if (idx >= 0) {
- 		/* Make sure all entries differ. */
- 		write_c0_entryhi(KSEG0+idx*0x2000);
-+		mtc0_tlbw_hazard();
- 		tlb_write_indexed();
-+		tlbw_use_hazard();
- 	}
--	BARRIER;
- 	write_c0_entryhi(oldpid);
-+
- 	local_irq_restore(flags);
- }
- 
-@@ -208,7 +177,6 @@
- void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
- {
- 	unsigned long flags;
--	unsigned int asid;
- 	pgd_t *pgdp;
- 	pmd_t *pmdp;
- 	pte_t *ptep;
-@@ -222,70 +190,58 @@
- 
- 	pid = read_c0_entryhi() & ASID_MASK;
- 
--#ifdef DEBUG_TLB
--	if ((pid != (cpu_asid(smp_processor_id(), vma->vm_mm))) ||
--	   (cpu_context(smp_processor_id(), vma->vm_mm) == 0)) {
--		printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%d"
--		       "tlbpid=%d\n", (int) (cpu_context(smp_processor_id(),
--		       vma->vm_mm) & ASID_MASK), pid);
--	}
--#endif
--
- 	local_irq_save(flags);
- 	address &= (PAGE_MASK << 1);
--	write_c0_entryhi(address | (pid));
-+	write_c0_entryhi(address | pid);
- 	pgdp = pgd_offset(vma->vm_mm, address);
--	BARRIER;
-+	mtc0_tlbw_hazard();
- 	tlb_probe();
- 	BARRIER;
- 	pmdp = pmd_offset(pgdp, address);
- 	idx = read_c0_index();
- 	ptep = pte_offset(pmdp, address);
--	BARRIER;
- 	write_c0_entrylo0(pte_val(*ptep++) >> 6);
- 	write_c0_entrylo1(pte_val(*ptep) >> 6);
--	write_c0_entryhi(address | (pid));
--	BARRIER;
--	if(idx < 0) {
-+	write_c0_entryhi(address | pid);
-+	mtc0_tlbw_hazard();
-+	if (idx < 0)
- 		tlb_write_random();
--	} else {
-+	else
- 		tlb_write_indexed();
--	}
--	BARRIER;
-+	tlbw_use_hazard();
- 	write_c0_entryhi(pid);
--	BARRIER;
- 	local_irq_restore(flags);
- }
- 
--void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
--				      unsigned long entryhi, unsigned long pagemask)
-+void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
-+			    unsigned long entryhi, unsigned long pagemask)
- {
--        unsigned long flags;
--        unsigned long wired;
--        unsigned long old_pagemask;
--        unsigned long old_ctx;
--
--        local_irq_save(flags);
--        /* Save old context and create impossible VPN2 value */
--        old_ctx = (read_c0_entryhi() & ASID_MASK);
--        old_pagemask = read_c0_pagemask();
--        wired = read_c0_wired();
--        write_c0_wired(wired + 1);
--        write_c0_index(wired);
--        BARRIER;
--        write_c0_pagemask(pagemask);
--        write_c0_entryhi(entryhi);
--        write_c0_entrylo0(entrylo0);
--        write_c0_entrylo1(entrylo1);
--        BARRIER;
--        tlb_write_indexed();
--        BARRIER;
--
--        write_c0_entryhi(old_ctx);
--        BARRIER;
--        write_c0_pagemask(old_pagemask);
--        local_flush_tlb_all();
--        local_irq_restore(flags);
-+	unsigned long flags;
-+	unsigned long wired;
-+	unsigned long old_pagemask;
-+	unsigned long old_ctx;
-+
-+	local_irq_save(flags);
-+	/* Save old context and create impossible VPN2 value */
-+	old_ctx = read_c0_entryhi() & ASID_MASK;
-+	old_pagemask = read_c0_pagemask();
-+	wired = read_c0_wired();
-+	write_c0_wired(wired + 1);
-+	write_c0_index(wired);
-+	BARRIER;
-+	write_c0_pagemask(pagemask);
-+	write_c0_entryhi(entryhi);
-+	write_c0_entrylo0(entrylo0);
-+	write_c0_entrylo1(entrylo1);
-+	mtc0_tlbw_hazard();
-+	tlb_write_indexed();
-+	tlbw_use_hazard();
-+
-+	write_c0_entryhi(old_ctx);
-+	BARRIER;
-+	write_c0_pagemask(old_pagemask);
-+	local_flush_tlb_all();
-+	local_irq_restore(flags);
- }
- 
- /*
-@@ -317,17 +273,15 @@
- 	}
- 
- 	write_c0_index(temp_tlb_entry);
--	BARRIER;
- 	write_c0_pagemask(pagemask);
- 	write_c0_entryhi(entryhi);
- 	write_c0_entrylo0(entrylo0);
- 	write_c0_entrylo1(entrylo1);
--	BARRIER;
-+	mtc0_tlbw_hazard();
- 	tlb_write_indexed();
--	BARRIER;
-+	tlbw_use_hazard();
- 
- 	write_c0_entryhi(old_ctx);
--	BARRIER;
- 	write_c0_pagemask(old_pagemask);
- out:
- 	local_irq_restore(flags);
-@@ -348,15 +302,23 @@
- 		return;
- 
- 	config1 = read_c0_config1();
--	if (!((config1 >> 7) & 3))
--		panic("No MMU present");
-+	if (!((config >> 7) & 3))
-+		panic("No TLB present");
- 
- 	c->tlbsize = ((config1 >> 25) & 0x3f) + 1;
- }
- 
- void __init r4k_tlb_init(void)
- {
--	unsigned long config = read_c0_config();
-+	unsigned int config = read_c0_config();
-+
-+	/*
-+	 * You should never change this register:
-+	 *   - On R4600 1.7 the tlbp never hits for pages smaller than
-+	 *     the value in the c0_pagemask register.
-+	 *   - The entire mm handling assumes the c0_pagemask register to
-+	 *     be set for 4kb pages.
-+	 */
- 	probe_tlb(config);
- 	write_c0_pagemask(PM_DEFAULT_MASK);
- 	write_c0_wired(0);
-diff -Nur linux-2.4.32-rc1/drivers/char/au1000_gpio.c linux-2.4.32-rc1.mips/drivers/char/au1000_gpio.c
---- linux-2.4.32-rc1/drivers/char/au1000_gpio.c	2003-08-25 13:44:41.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/char/au1000_gpio.c	2003-12-20 14:18:51.000000000 +0100
-@@ -246,7 +246,7 @@
- 
- static struct miscdevice au1000gpio_miscdev =
- {
--	GPIO_MINOR,
-+	MISC_DYNAMIC_MINOR,
- 	"au1000_gpio",
- 	&au1000gpio_fops
- };
-diff -Nur linux-2.4.32-rc1/drivers/char/au1550_psc_spi.c linux-2.4.32-rc1.mips/drivers/char/au1550_psc_spi.c
---- linux-2.4.32-rc1/drivers/char/au1550_psc_spi.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/char/au1550_psc_spi.c	2005-02-11 21:37:24.000000000 +0100
-@@ -0,0 +1,466 @@
-+/*
-+ *  Driver for Alchemy Au1550 SPI on the PSC.
-+ *
-+ * Copyright 2004 Embedded Edge, LLC.
-+ *	dan@embeddededge.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE	LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/config.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/miscdevice.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <asm/au1000.h>
-+#include <asm/au1550_spi.h>
-+#include <asm/au1xxx_psc.h>
-+
-+#ifdef CONFIG_MIPS_PB1550
-+#include <asm/pb1550.h>
-+#endif
-+
-+#ifdef CONFIG_MIPS_DB1550
-+#include <asm/db1x00.h>
-+#endif
-+
-+#ifdef CONFIG_MIPS_PB1200
-+#include <asm/pb1200.h>
-+#endif
-+
-+/* This is just a simple programmed I/O SPI interface on the PSC of the 1550.
-+ * We support open, close, write, and ioctl.  The SPI is a full duplex
-+ * interface, you can't read without writing.  So, the write system call
-+ * copies the bytes out to the SPI, and whatever is returned is placed
-+ * in the same buffer.  Kinda weird, maybe we'll change it, but for now
-+ * it works OK.
-+ * I didn't implement any DMA yet, and it's a debate about the necessity.
-+ * The SPI clocks are usually quite fast, so data is sent/received as
-+ * quickly as you can stuff the FIFO.  The overhead of DMA and interrupts
-+ * are usually far greater than the data transfer itself.  If, however,
-+ * we find applications that move large amounts of data, we may choose
-+ * use the overhead of buffering and DMA to do the work.
-+ */
-+
-+/* The maximum clock rate specified in the manual is 2mHz.
-+*/
-+#define MAX_BAUD_RATE	(2 * 1000000)
-+#define PSC_INTCLK_RATE (32 * 1000000)
-+
-+static	int	inuse;
-+
-+/* We have to know what the user requested for the data length
-+ * so we know how to stuff the fifo.  The FIFO is 32 bits wide,
-+ * and we have to load it with the bits to go in a single transfer.
-+ */
-+static	uint	spi_datalen;
-+
-+static int
-+au1550spi_master_done( int ms )
-+{
-+	int timeout=ms;
-+	volatile psc_spi_t *sp;
-+
-+	sp = (volatile psc_spi_t *)SPI_PSC_BASE;
-+
-+	/* Loop until MD is set or timeout has expired */
-+	while(!(sp->psc_spievent & PSC_SPIEVNT_MD) &&  timeout--) udelay(1000);
-+
-+	if ( !timeout )
-+		return 0;
-+	else
-+		sp->psc_spievent |= PSC_SPIEVNT_MD;
-+
-+	return 1;
-+}
-+
-+static int
-+au1550spi_open(struct inode *inode, struct file *file)
-+{
-+	if (inuse)
-+		return -EBUSY;
-+
-+	inuse = 1;
-+
-+	MOD_INC_USE_COUNT;
-+
-+	return 0;
-+}
-+
-+static ssize_t
-+au1550spi_write(struct file *fp, const char *bp, size_t count, loff_t *ppos)
-+{
-+	int	bytelen, i;
-+	size_t	rcount, retval;
-+	unsigned char	sb, *rp, *wp;
-+	uint	fifoword, pcr, stat;
-+	volatile psc_spi_t *sp;
-+
-+	/* Get the number of bytes per transfer.
-+	*/
-+	bytelen = ((spi_datalen - 1) / 8) + 1;
-+
-+	/* User needs to send us multiple of this count.
-+	*/
-+	if ((count % bytelen) != 0)
-+		return -EINVAL;
-+
-+	rp = wp = (unsigned char *)bp;
-+	retval = rcount = count;
-+
-+	/* Reset the FIFO.
-+	*/
-+	sp = (volatile psc_spi_t *)SPI_PSC_BASE;
-+	sp->psc_spipcr = (PSC_SPIPCR_RC | PSC_SPIPCR_TC);
-+	au_sync();
-+	do {
-+		pcr = sp->psc_spipcr;
-+		au_sync();
-+	} while (pcr != 0);
-+
-+	/* Prime the transmit FIFO.
-+	*/
-+	while (count > 0) {
-+		fifoword = 0;
-+		for (i=0; i<bytelen; i++) {
-+			fifoword <<= 8;
-+			if (get_user(sb, wp) < 0)
-+				return -EFAULT;
-+			fifoword |= sb;
-+			wp++;
-+		}
-+		count -= bytelen;
-+		if (count <= 0)
-+			fifoword |= PSC_SPITXRX_LC;
-+		sp->psc_spitxrx = fifoword;
-+		au_sync();
-+		stat = sp->psc_spistat;
-+		au_sync();
-+		if (stat & PSC_SPISTAT_TF)
-+			break;
-+	}
-+
-+	/* Start the transfer.
-+	*/
-+	sp->psc_spipcr = PSC_SPIPCR_MS;
-+	au_sync();
-+
-+	/* Now, just keep the transmit fifo full and empty the receive.
-+	*/
-+	while (count > 0) {
-+		stat = sp->psc_spistat;
-+		au_sync();
-+		while ((stat & PSC_SPISTAT_RE) == 0) {
-+			fifoword = sp->psc_spitxrx;
-+			au_sync();
-+			for (i=0; i<bytelen; i++) {
-+				sb = fifoword & 0xff;
-+				if (put_user(sb, rp) < 0)
-+					return -EFAULT;
-+				fifoword >>= 8;
-+				rp++;
-+			}
-+			rcount -= bytelen;
-+			stat = sp->psc_spistat;
-+			au_sync();
-+		}
-+		if ((stat & PSC_SPISTAT_TF) == 0) {
-+			fifoword = 0;
-+			for (i=0; i<bytelen; i++) {
-+				fifoword <<= 8;
-+				if (get_user(sb, wp) < 0)
-+					return -EFAULT;
-+				fifoword |= sb;
-+				wp++;
-+			}
-+			count -= bytelen;
-+			if (count <= 0)
-+				fifoword |= PSC_SPITXRX_LC;
-+			sp->psc_spitxrx = fifoword;
-+			au_sync();
-+		}
-+	}
-+
-+	/* All of the bytes for transmit have been written.  Hang
-+	 * out waiting for any residual bytes that are yet to be
-+	 * read from the fifo.
-+	 */
-+	while (rcount > 0) {
-+		stat = sp->psc_spistat;
-+		au_sync();
-+		if ((stat & PSC_SPISTAT_RE) == 0) {
-+			fifoword = sp->psc_spitxrx;
-+			au_sync();
-+			for (i=0; i<bytelen; i++) {
-+				sb = fifoword & 0xff;
-+				if (put_user(sb, rp) < 0)
-+					return -EFAULT;
-+				fifoword >>= 8;
-+				rp++;
-+			}
-+			rcount -= bytelen;
-+		}
-+	}
-+
-+	/* Wait for MasterDone event. 30ms timeout */
-+	if (!au1550spi_master_done(30) ) retval = -EFAULT;
-+	return retval;
-+}
-+
-+static int
-+au1550spi_release(struct inode *inode, struct file *file)
-+{
-+	MOD_DEC_USE_COUNT;
-+
-+	inuse = 0;
-+
-+	return 0;
-+}
-+
-+/* Set the baud rate closest to the request, then return the actual
-+ * value we are using.
-+ */
-+static uint
-+set_baud_rate(uint baud)
-+{
-+	uint	rate, tmpclk, brg, ctl, stat;
-+	volatile psc_spi_t *sp;
-+
-+	/* For starters, the input clock is divided by two.
-+	*/
-+	tmpclk = PSC_INTCLK_RATE/2;
-+
-+	rate = tmpclk / baud;
-+
-+	/* The dividers work as follows:
-+	 *	baud = tmpclk / (2 * (brg + 1))
-+	 */
-+	 brg = (rate/2) - 1;
-+
-+	 /* Test BRG to ensure it will fit into the 6 bits allocated.
-+	 */
-+
-+	 /* Make sure the device is disabled while we make the change.
-+	 */
-+	sp = (volatile psc_spi_t *)SPI_PSC_BASE;
-+	ctl = sp->psc_spicfg;
-+	au_sync();
-+	sp->psc_spicfg = ctl & ~PSC_SPICFG_DE_ENABLE;
-+	au_sync();
-+	ctl = PSC_SPICFG_CLR_BAUD(ctl);
-+	ctl |= PSC_SPICFG_SET_BAUD(brg);
-+	sp->psc_spicfg = ctl;
-+	au_sync();
-+
-+	/* If the device was running prior to getting here, wait for
-+	 * it to restart.
-+	 */
-+	if (ctl & PSC_SPICFG_DE_ENABLE) {
-+		do {
-+			stat = sp->psc_spistat;
-+			au_sync();
-+		} while ((stat & PSC_SPISTAT_DR) == 0);
-+	}
-+
-+	/* Return the actual value.
-+	*/
-+	rate = tmpclk / (2 * (brg + 1));
-+
-+	return(rate);
-+}
-+
-+static uint
-+set_word_len(uint len)
-+{
-+	uint	ctl, stat;
-+	volatile psc_spi_t *sp;
-+
-+	if ((len < 4) || (len > 24))
-+		return -EINVAL;
-+
-+	 /* Make sure the device is disabled while we make the change.
-+	 */
-+	sp = (volatile psc_spi_t *)SPI_PSC_BASE;
-+	ctl = sp->psc_spicfg;
-+	au_sync();
-+	sp->psc_spicfg = ctl & ~PSC_SPICFG_DE_ENABLE;
-+	au_sync();
-+	ctl = PSC_SPICFG_CLR_LEN(ctl);
-+	ctl |= PSC_SPICFG_SET_LEN(len);
-+	sp->psc_spicfg = ctl;
-+	au_sync();
-+
-+	/* If the device was running prior to getting here, wait for
-+	 * it to restart.
-+	 */
-+	if (ctl & PSC_SPICFG_DE_ENABLE) {
-+		do {
-+			stat = sp->psc_spistat;
-+			au_sync();
-+		} while ((stat & PSC_SPISTAT_DR) == 0);
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+au1550spi_ioctl(struct inode *inode, struct file *file,
-+			    unsigned int cmd, unsigned long arg)
-+{
-+	int status;
-+	u32 val;
-+
-+	status = 0;
-+
-+	switch(cmd) {
-+	case AU1550SPI_WORD_LEN:
-+		status = set_word_len(arg);
-+		break;
-+
-+	case AU1550SPI_SET_BAUD:
-+		if (get_user(val, (u32 *)arg)) 
-+			return -EFAULT;
-+
-+		val = set_baud_rate(val);
-+		if (put_user(val, (u32 *)arg)) 
-+			return -EFAULT;
-+		break;
-+
-+	default:
-+		status = -ENOIOCTLCMD;
-+
-+	}
-+
-+	return status;
-+}
-+
-+
-+static struct file_operations au1550spi_fops =
-+{
-+	owner:		THIS_MODULE,
-+	write:		au1550spi_write,
-+	ioctl:		au1550spi_ioctl,
-+	open:		au1550spi_open,
-+	release:	au1550spi_release,
-+};
-+
-+
-+static struct miscdevice au1550spi_miscdev =
-+{
-+	MISC_DYNAMIC_MINOR,
-+	"au1550_spi",
-+	&au1550spi_fops
-+};
-+
-+
-+int __init
-+au1550spi_init(void)
-+{
-+	uint	clk, rate, stat;
-+	volatile psc_spi_t *sp;
-+
-+	/* Wire up Freq3 as a clock for the SPI.  The PSC does
-+	 * factor of 2 divisor, so run a higher rate so we can
-+	 * get some granularity to the clock speeds.
-+	 * We can't do this in board set up because the frequency
-+	 * is computed too late.
-+	 */
-+	rate = get_au1x00_speed();
-+	rate /= PSC_INTCLK_RATE;
-+
-+	/* The FRDIV in the frequency control is (FRDIV + 1) * 2
-+	*/
-+	rate /=2;
-+	rate--;
-+	clk = au_readl(SYS_FREQCTRL1);
-+	au_sync();
-+	clk &= ~SYS_FC_FRDIV3_MASK;
-+	clk |= (rate << SYS_FC_FRDIV3_BIT);
-+	clk |= SYS_FC_FE3;
-+	au_writel(clk, SYS_FREQCTRL1);
-+	au_sync();
-+
-+	/* Set up the clock source routing to get Freq3 to PSC0_intclk.
-+	*/
-+	clk = au_readl(SYS_CLKSRC);
-+	au_sync();
-+	clk &= ~0x03e0;
-+	clk |= (5 << 7);
-+	au_writel(clk, SYS_CLKSRC);
-+	au_sync();
-+
-+	/* Set up GPIO pin function to drive PSC0_SYNC1, which is
-+	 * the SPI Select.
-+	 */
-+	clk = au_readl(SYS_PINFUNC);
-+	au_sync();
-+	clk |= 1;
-+	au_writel(clk, SYS_PINFUNC);
-+	au_sync();
-+
-+	/* Now, set up the PSC for SPI PIO mode.
-+	*/
-+	sp = (volatile psc_spi_t *)SPI_PSC_BASE;
-+	sp->psc_ctrl = PSC_CTRL_DISABLE;
-+	au_sync();
-+	sp->psc_sel = PSC_SEL_PS_SPIMODE;
-+	sp->psc_spicfg = 0;
-+	au_sync();
-+	sp->psc_ctrl = PSC_CTRL_ENABLE;
-+	au_sync();
-+	do {
-+		stat = sp->psc_spistat;
-+		au_sync();
-+	} while ((stat & PSC_SPISTAT_SR) == 0);
-+
-+	sp->psc_spicfg = (PSC_SPICFG_RT_FIFO8 | PSC_SPICFG_TT_FIFO8 |
-+				PSC_SPICFG_DD_DISABLE | PSC_SPICFG_MO);
-+	sp->psc_spicfg |= PSC_SPICFG_SET_LEN(8);
-+	spi_datalen = 8;
-+	sp->psc_spimsk = PSC_SPIMSK_ALLMASK;
-+	au_sync();
-+
-+	set_baud_rate(1000000);
-+
-+	sp->psc_spicfg |= PSC_SPICFG_DE_ENABLE;
-+	do {
-+		stat = sp->psc_spistat;
-+		au_sync();
-+	} while ((stat & PSC_SPISTAT_DR) == 0);
-+
-+	misc_register(&au1550spi_miscdev);
-+	printk("Au1550 SPI driver\n");
-+	return 0;
-+}	
-+
-+
-+void __exit
-+au1550spi_exit(void)
-+{
-+	misc_deregister(&au1550spi_miscdev);
-+}
-+
-+
-+module_init(au1550spi_init);
-+module_exit(au1550spi_exit);
-diff -Nur linux-2.4.32-rc1/drivers/char/Config.in linux-2.4.32-rc1.mips/drivers/char/Config.in
---- linux-2.4.32-rc1/drivers/char/Config.in	2004-08-08 01:26:04.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/char/Config.in	2005-02-11 22:09:56.000000000 +0100
-@@ -313,14 +313,11 @@
- if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then
-    bool 'Tadpole ANA H8 Support (OBSOLETE)'  CONFIG_H8
- fi
--if [ "$CONFIG_MIPS" = "y" -a "$CONFIG_NEW_TIME_C" = "y" ]; then
--   tristate 'Generic MIPS RTC Support' CONFIG_MIPS_RTC
--fi
- if [ "$CONFIG_SGI_IP22" = "y" ]; then
--   bool 'SGI DS1286 RTC support' CONFIG_SGI_DS1286
-+   tristate 'Dallas DS1286 RTC support' CONFIG_DS1286
- fi
- if [ "$CONFIG_SGI_IP27" = "y" ]; then
--   bool 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC
-+   tristate 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC
- fi
- if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
-    tristate 'Dallas DS1742 RTC support' CONFIG_DS1742
-@@ -383,6 +380,11 @@
-       source drivers/char/drm/Config.in
-    fi
- fi
-+
-+if [ "$CONFIG_X86" = "y" ]; then
-+   tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
-+fi
-+
- endmenu
- 
- if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then
-@@ -391,6 +393,7 @@
- if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
-    tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO
-    tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846
-+   #tristate ' Alchemy Au1550 PSC SPI support' CONFIG_AU1550_PSC_SPI
- fi
- if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
-   tristate ' ITE GPIO' CONFIG_ITE_GPIO
-diff -Nur linux-2.4.32-rc1/drivers/char/decserial.c linux-2.4.32-rc1.mips/drivers/char/decserial.c
---- linux-2.4.32-rc1/drivers/char/decserial.c	2003-08-25 13:44:41.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/char/decserial.c	2004-09-28 02:53:01.000000000 +0200
-@@ -3,95 +3,105 @@
-  *      choose the right serial device at boot time
-  *
-  * triemer 6-SEP-1998
-- *      sercons.c is designed to allow the three different kinds 
-+ *      sercons.c is designed to allow the three different kinds
-  *      of serial devices under the decstation world to co-exist
-- *      in the same kernel.  The idea here is to abstract 
-+ *      in the same kernel.  The idea here is to abstract
-  *      the pieces of the drivers that are common to this file
-  *      so that they do not clash at compile time and runtime.
-  *
-  * HK 16-SEP-1998 v0.002
-  *      removed the PROM console as this is not a real serial
-  *      device. Added support for PROM console in drivers/char/tty_io.c
-- *      instead. Although it may work to enable more than one 
-+ *      instead. Although it may work to enable more than one
-  *      console device I strongly recommend to use only one.
-+ *
-+ *	Copyright (C) 2004  Maciej W. Rozycki
-  */
- 
- #include <linux/config.h>
-+#include <linux/errno.h>
- #include <linux/init.h>
-+
- #include <asm/dec/machtype.h>
-+#include <asm/dec/serial.h>
-+
-+extern int register_zs_hook(unsigned int channel,
-+			    struct dec_serial_hook *hook);
-+extern int unregister_zs_hook(unsigned int channel);
-+
-+extern int register_dz_hook(unsigned int channel,
-+			    struct dec_serial_hook *hook);
-+extern int unregister_dz_hook(unsigned int channel);
- 
-+int register_dec_serial_hook(unsigned int channel,
-+			     struct dec_serial_hook *hook)
-+{
- #ifdef CONFIG_ZS
--extern int zs_init(void);
-+	if (IOASIC)
-+		return register_zs_hook(channel, hook);
- #endif
--
- #ifdef CONFIG_DZ
--extern int dz_init(void);
-+	if (!IOASIC)
-+		return register_dz_hook(channel, hook);
- #endif
-+	return 0;
-+}
- 
--#ifdef CONFIG_SERIAL_DEC_CONSOLE
--
-+int unregister_dec_serial_hook(unsigned int channel)
-+{
- #ifdef CONFIG_ZS
--extern void zs_serial_console_init(void);
-+	if (IOASIC)
-+		return unregister_zs_hook(channel);
- #endif
--
- #ifdef CONFIG_DZ
--extern void dz_serial_console_init(void);
--#endif
--
-+	if (!IOASIC)
-+		return unregister_dz_hook(channel);
- #endif
-+	return 0;
-+}
- 
--/* rs_init - starts up the serial interface -
--   handle normal case of starting up the serial interface */
- 
--#ifdef CONFIG_SERIAL_DEC
-+extern int zs_init(void);
-+extern int dz_init(void);
- 
-+/*
-+ * rs_init - starts up the serial interface -
-+ * handle normal case of starting up the serial interface
-+ */
- int __init rs_init(void)
- {
--
--#if defined(CONFIG_ZS) && defined(CONFIG_DZ)
--    if (IOASIC)
--	return zs_init();
--    else
--	return dz_init();
--#else
--
- #ifdef CONFIG_ZS
--    return zs_init();
-+	if (IOASIC)
-+		return zs_init();
- #endif
--
- #ifdef CONFIG_DZ
--    return dz_init();
--#endif
--
-+	if (!IOASIC)
-+		return dz_init();
- #endif
-+	return -ENXIO;
- }
- 
- __initcall(rs_init);
- 
--#endif
- 
- #ifdef CONFIG_SERIAL_DEC_CONSOLE
- 
--/* dec_serial_console_init handles the special case of starting
-- *   up the console on the serial port
-+extern void zs_serial_console_init(void);
-+extern void dz_serial_console_init(void);
-+
-+/*
-+ * dec_serial_console_init handles the special case of starting
-+ * up the console on the serial port
-  */
- void __init dec_serial_console_init(void)
- {
--#if defined(CONFIG_ZS) && defined(CONFIG_DZ)
--    if (IOASIC)
--	zs_serial_console_init();
--    else
--	dz_serial_console_init();
--#else
--
- #ifdef CONFIG_ZS
--    zs_serial_console_init();
-+	if (IOASIC)
-+		zs_serial_console_init();
- #endif
--
- #ifdef CONFIG_DZ
--    dz_serial_console_init();
--#endif
--
-+	if (!IOASIC)
-+		dz_serial_console_init();
- #endif
- }
- 
-diff -Nur linux-2.4.32-rc1/drivers/char/ds1286.c linux-2.4.32-rc1.mips/drivers/char/ds1286.c
---- linux-2.4.32-rc1/drivers/char/ds1286.c	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/char/ds1286.c	2004-01-10 06:21:39.000000000 +0100
-@@ -1,6 +1,10 @@
- /*
-  * DS1286 Real Time Clock interface for Linux
-  *
-+ * Copyright (C) 2003 TimeSys Corp.
-+ *                    S. James Hill (James.Hill@timesys.com)
-+ *                                  (sjhill@realitydiluted.com)
-+ *
-  * Copyright (C) 1998, 1999, 2000 Ralf Baechle
-  *
-  * Based on code written by Paul Gortmaker.
-@@ -29,6 +33,7 @@
- #include <linux/types.h>
- #include <linux/errno.h>
- #include <linux/miscdevice.h>
-+#include <linux/module.h>
- #include <linux/slab.h>
- #include <linux/ioport.h>
- #include <linux/fcntl.h>
-@@ -95,6 +100,12 @@
- 	return -EIO;
- }
- 
-+void rtc_ds1286_wait(void)
-+{
-+	unsigned char sec = CMOS_READ(RTC_SECONDS);
-+	while (sec == CMOS_READ(RTC_SECONDS));
-+}
-+
- static int ds1286_ioctl(struct inode *inode, struct file *file,
-                         unsigned int cmd, unsigned long arg)
- {
-@@ -249,23 +260,22 @@
- {
- 	spin_lock_irq(&ds1286_lock);
- 
--	if (ds1286_status & RTC_IS_OPEN)
--		goto out_busy;
-+	if (ds1286_status & RTC_IS_OPEN) {
-+		spin_unlock_irq(&ds1286_lock);
-+		return -EBUSY;
-+	}
- 
- 	ds1286_status |= RTC_IS_OPEN;
- 
--	spin_lock_irq(&ds1286_lock);
-+	spin_unlock_irq(&ds1286_lock);
- 	return 0;
--
--out_busy:
--	spin_lock_irq(&ds1286_lock);
--	return -EBUSY;
- }
- 
- static int ds1286_release(struct inode *inode, struct file *file)
- {
-+	spin_lock_irq(&ds1286_lock);
- 	ds1286_status &= ~RTC_IS_OPEN;
--
-+	spin_unlock_irq(&ds1286_lock);
- 	return 0;
- }
- 
-@@ -276,32 +286,6 @@
- 	return 0;
- }
- 
--/*
-- *	The various file operations we support.
-- */
--
--static struct file_operations ds1286_fops = {
--	.llseek		= no_llseek,
--	.read		= ds1286_read,
--	.poll		= ds1286_poll,
--	.ioctl		= ds1286_ioctl,
--	.open		= ds1286_open,
--	.release	= ds1286_release,
--};
--
--static struct miscdevice ds1286_dev=
--{
--	.minor	= RTC_MINOR,
--	.name	= "rtc",
--	.fops	= &ds1286_fops,
--};
--
--int __init ds1286_init(void)
--{
--	printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION);
--	return misc_register(&ds1286_dev);
--}
--
- static char *days[] = {
- 	"***", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"
- };
-@@ -528,3 +512,38 @@
- 	BCD_TO_BIN(alm_tm->tm_hour);
- 	alm_tm->tm_sec = 0;
- }
-+
-+static struct file_operations ds1286_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.read		= ds1286_read,
-+	.poll		= ds1286_poll,
-+	.ioctl		= ds1286_ioctl,
-+	.open		= ds1286_open,
-+	.release	= ds1286_release,
-+};
-+
-+static struct miscdevice ds1286_dev =
-+{
-+	.minor	= RTC_MINOR,
-+	.name	= "rtc",
-+	.fops	= &ds1286_fops,
-+};
-+
-+static int __init ds1286_init(void)
-+{
-+	printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION);
-+	return misc_register(&ds1286_dev);
-+}
-+
-+static void __exit ds1286_exit(void)
-+{
-+	misc_deregister(&ds1286_dev);
-+}
-+
-+module_init(ds1286_init);
-+module_exit(ds1286_exit);
-+EXPORT_NO_SYMBOLS;
-+
-+MODULE_AUTHOR("Ralf Baechle");
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.32-rc1/drivers/char/ds1742.c linux-2.4.32-rc1.mips/drivers/char/ds1742.c
---- linux-2.4.32-rc1/drivers/char/ds1742.c	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/char/ds1742.c	2004-01-09 20:27:16.000000000 +0100
-@@ -142,6 +142,7 @@
- 	CMOS_WRITE(RTC_WRITE, RTC_CONTROL);
- 
- 	/* convert */
-+	memset(&tm, 0, sizeof(struct rtc_time));
- 	to_tm(t, &tm);
- 
- 	/* check each field one by one */
-@@ -216,6 +217,7 @@
- 	unsigned long curr_time;
- 
- 	curr_time = rtc_ds1742_get_time();
-+	memset(&tm, 0, sizeof(struct rtc_time));
- 	to_tm(curr_time, &tm);
- 
- 	p = buf;
-@@ -251,8 +253,8 @@
- 
- void rtc_ds1742_wait(void)
- {
--	while (CMOS_READ(RTC_SECONDS) & 1);
--	while (!(CMOS_READ(RTC_SECONDS) & 1));
-+	unsigned char sec = CMOS_READ(RTC_SECONDS);
-+	while (sec == CMOS_READ(RTC_SECONDS));
- }
- 
- static int ds1742_ioctl(struct inode *inode, struct file *file,
-@@ -264,6 +266,7 @@
- 	switch (cmd) {
- 	case RTC_RD_TIME:	/* Read the time/date from RTC  */
- 		curr_time = rtc_ds1742_get_time();
-+		memset(&rtc_tm, 0, sizeof(struct rtc_time));
- 		to_tm(curr_time, &rtc_tm);
- 		rtc_tm.tm_year -= 1900;
- 		return copy_to_user((void *) arg, &rtc_tm, sizeof(rtc_tm)) ? 
-diff -Nur linux-2.4.32-rc1/drivers/char/dummy_keyb.c linux-2.4.32-rc1.mips/drivers/char/dummy_keyb.c
---- linux-2.4.32-rc1/drivers/char/dummy_keyb.c	2003-08-25 13:44:41.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/char/dummy_keyb.c	2004-01-09 09:53:08.000000000 +0100
-@@ -140,3 +140,7 @@
- {
- 	printk("Dummy keyboard driver installed.\n");
- }
-+#ifdef CONFIG_MAGIC_SYSRQ
-+unsigned char kbd_sysrq_key;
-+unsigned char kbd_sysrq_xlate[128];
-+#endif
-diff -Nur linux-2.4.32-rc1/drivers/char/dz.c linux-2.4.32-rc1.mips/drivers/char/dz.c
---- linux-2.4.32-rc1/drivers/char/dz.c	2005-01-19 15:09:44.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/char/dz.c	2004-12-27 05:13:42.000000000 +0100
-@@ -1,11 +1,13 @@
- /*
-- * dz.c: Serial port driver for DECStations equiped 
-+ * dz.c: Serial port driver for DECstations equipped 
-  *       with the DZ chipset.
-  *
-  * Copyright (C) 1998 Olivier A. D. Lebaillif 
-  *             
-  * Email: olivier.lebaillif@ifrsys.com
-  *
-+ * Copyright (C) 2004  Maciej W. Rozycki
-+ *
-  * [31-AUG-98] triemer
-  * Changed IRQ to use Harald's dec internals interrupts.h
-  * removed base_addr code - moving address assignment to setup.c
-@@ -24,6 +26,7 @@
- #undef DEBUG_DZ
- 
- #include <linux/config.h>
-+#include <linux/delay.h>
- #include <linux/version.h>
- #include <linux/kernel.h>
- #include <linux/sched.h>
-@@ -54,33 +57,56 @@
- #include <asm/system.h>
- #include <asm/uaccess.h>
- 
--#define CONSOLE_LINE (3)	/* for definition of struct console */
-+#ifdef CONFIG_MAGIC_SYSRQ
-+#include <linux/sysrq.h>
-+#endif
- 
- #include "dz.h"
- 
--#define DZ_INTR_DEBUG 1
--
- DECLARE_TASK_QUEUE(tq_serial);
- 
--static struct dz_serial *lines[4];
--static unsigned char tmp_buffer[256];
-+static struct dz_serial multi[DZ_NB_PORT];    /* Four serial lines in the DZ chip */
-+static struct tty_driver serial_driver, callout_driver;
-+
-+static struct tty_struct *serial_table[DZ_NB_PORT];
-+static struct termios *serial_termios[DZ_NB_PORT];
-+static struct termios *serial_termios_locked[DZ_NB_PORT];
-+
-+static int serial_refcount;
- 
--#ifdef DEBUG_DZ
- /*
-- * debugging code to send out chars via prom 
-+ * tmp_buf is used as a temporary buffer by serial_write.  We need to
-+ * lock it in case the copy_from_user blocks while swapping in a page,
-+ * and some other program tries to do a serial write at the same time.
-+ * Since the lock will only come under contention when the system is
-+ * swapping and available memory is low, it makes sense to share one
-+ * buffer across all the serial ports, since it significantly saves
-+ * memory if large numbers of serial ports are open.
-  */
--static void debug_console(const char *s, int count)
--{
--	unsigned i;
-+static unsigned char *tmp_buf;
-+static DECLARE_MUTEX(tmp_buf_sem);
- 
--	for (i = 0; i < count; i++) {
--		if (*s == 10)
--			prom_printf("%c", 13);
--		prom_printf("%c", *s++);
--	}
--}
-+static char *dz_name __initdata = "DECstation DZ serial driver version ";
-+static char *dz_version __initdata = "1.03";
-+
-+static struct dz_serial *lines[DZ_NB_PORT];
-+static unsigned char tmp_buffer[256];
-+
-+#ifdef CONFIG_SERIAL_DEC_CONSOLE
-+static struct console dz_sercons;
-+#endif
-+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
-+   !defined(MODULE)
-+static unsigned long break_pressed; /* break, really ... */
- #endif
- 
-+static void change_speed (struct dz_serial *);
-+
-+static int baud_table[] = {
-+        0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
-+        9600, 0
-+};
-+
- /*
-  * ------------------------------------------------------------
-  * dz_in () and dz_out ()
-@@ -94,15 +120,16 @@
- {
- 	volatile unsigned short *addr =
- 		(volatile unsigned short *) (info->port + offset);
-+
- 	return *addr;
- }
- 
- static inline void dz_out(struct dz_serial *info, unsigned offset,
-                           unsigned short value)
- {
--
- 	volatile unsigned short *addr =
- 		(volatile unsigned short *) (info->port + offset);
-+
- 	*addr = value;
- }
- 
-@@ -143,25 +170,24 @@
- 
- 	tmp |= mask;		/* set the TX flag */
- 	dz_out(info, DZ_TCR, tmp);
--
- }
- 
- /*
-  * ------------------------------------------------------------
-- * Here starts the interrupt handling routines.  All of the 
-- * following subroutines are declared as inline and are folded 
-- * into dz_interrupt.  They were separated out for readability's 
-- * sake. 
-  *
-- * Note: rs_interrupt() is a "fast" interrupt, which means that it
-+ * Here starts the interrupt handling routines.  All of the following
-+ * subroutines are declared as inline and are folded into
-+ * dz_interrupt().  They were separated out for readability's sake.
-+ *
-+ * Note: dz_interrupt() is a "fast" interrupt, which means that it
-  * runs with interrupts turned off.  People who may want to modify
-- * rs_interrupt() should try to keep the interrupt handler as fast as
-+ * dz_interrupt() should try to keep the interrupt handler as fast as
-  * possible.  After you are done making modifications, it is not a bad
-  * idea to do:
-  * 
-  * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer dz.c
-  *
-- * and look at the resulting assemble code in serial.s.
-+ * and look at the resulting assemble code in dz.s.
-  *
-  * ------------------------------------------------------------
-  */
-@@ -188,101 +214,97 @@
-  * This routine deals with inputs from any lines.
-  * ------------------------------------------------------------
-  */
--static inline void receive_chars(struct dz_serial *info_in)
-+static inline void receive_chars(struct dz_serial *info_in,
-+				 struct pt_regs *regs)
- {
--
- 	struct dz_serial *info;
--	struct tty_struct *tty = 0;
-+	struct tty_struct *tty;
- 	struct async_icount *icount;
--	int ignore = 0;
--	unsigned short status, tmp;
--	unsigned char ch;
--
--	/* this code is going to be a problem...
--	   the call to tty_flip_buffer is going to need
--	   to be rethought...
--	 */
--	do {
--		status = dz_in(info_in, DZ_RBUF);
--		info = lines[LINE(status)];
-+	int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 };
-+	unsigned short status;
-+	unsigned char ch, flag;
-+	int i;
- 
--		/* punt so we don't get duplicate characters */
--		if (!(status & DZ_DVAL))
--			goto ignore_char;
--
--		ch = UCHAR(status);	/* grab the char */
--
--#if 0
--		if (info->is_console) {
--			if (ch == 0)
--				return;	/* it's a break ... */
--		}
--#endif
-+	while ((status = dz_in(info_in, DZ_RBUF)) & DZ_DVAL) {
-+		info = lines[LINE(status)];
-+		tty = info->tty;		/* point to the proper dev */
- 
--		tty = info->tty;	/* now tty points to the proper dev */
--		icount = &info->icount;
-+		ch = UCHAR(status);		/* grab the char */
- 
--		if (!tty)
--			break;
--		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
--			break;
-+		if (!tty && (!info->hook || !info->hook->rx_char))
-+			continue;
- 
--		*tty->flip.char_buf_ptr = ch;
--		*tty->flip.flag_buf_ptr = 0;
-+		icount = &info->icount;
- 		icount->rx++;
- 
--		/* keep track of the statistics */
--		if (status & (DZ_OERR | DZ_FERR | DZ_PERR)) {
--			if (status & DZ_PERR)	/* parity error */
--				icount->parity++;
--			else if (status & DZ_FERR)	/* frame error */
--				icount->frame++;
--			if (status & DZ_OERR)	/* overrun error */
--				icount->overrun++;
--
--			/*  check to see if we should ignore the character
--			   and mask off conditions that should be ignored
-+		flag = 0;
-+		if (status & DZ_FERR) {		/* frame error */
-+			/*
-+			 * There is no separate BREAK status bit, so
-+			 * treat framing errors as BREAKs for Magic SysRq
-+			 * and SAK; normally, otherwise.
- 			 */
--
--			if (status & info->ignore_status_mask) {
--				if (++ignore > 100)
--					break;
--				goto ignore_char;
-+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
-+   !defined(MODULE)
-+			if (info->line == dz_sercons.index) {
-+				if (!break_pressed)
-+					break_pressed = jiffies;
-+				continue;
- 			}
--			/* mask off the error conditions we want to ignore */
--			tmp = status & info->read_status_mask;
--
--			if (tmp & DZ_PERR) {
--				*tty->flip.flag_buf_ptr = TTY_PARITY;
--#ifdef DEBUG_DZ
--				debug_console("PERR\n", 5);
--#endif
--			} else if (tmp & DZ_FERR) {
--				*tty->flip.flag_buf_ptr = TTY_FRAME;
--#ifdef DEBUG_DZ
--				debug_console("FERR\n", 5);
- #endif
-+			flag = TTY_BREAK;
-+			if (info->flags & DZ_SAK)
-+				do_SAK(tty);
-+			else
-+				flag = TTY_FRAME;
-+		} else if (status & DZ_OERR)	/* overrun error */
-+			flag = TTY_OVERRUN;
-+		else if (status & DZ_PERR)	/* parity error */
-+			flag = TTY_PARITY;
-+
-+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
-+   !defined(MODULE)
-+		if (break_pressed && info->line == dz_sercons.index) {
-+			if (time_before(jiffies, break_pressed + HZ * 5)) {
-+				handle_sysrq(ch, regs, NULL, NULL);
-+				break_pressed = 0;
-+				continue;
- 			}
--			if (tmp & DZ_OERR) {
--#ifdef DEBUG_DZ
--				debug_console("OERR\n", 5);
-+			break_pressed = 0;
-+		}
- #endif
--				if (tty->flip.count < TTY_FLIPBUF_SIZE) {
--					tty->flip.count++;
--					tty->flip.flag_buf_ptr++;
--					tty->flip.char_buf_ptr++;
--					*tty->flip.flag_buf_ptr = TTY_OVERRUN;
--				}
--			}
-+
-+		if (info->hook && info->hook->rx_char) {
-+			(*info->hook->rx_char)(ch, flag);
-+			return;
- 		}
--		tty->flip.flag_buf_ptr++;
--		tty->flip.char_buf_ptr++;
--		tty->flip.count++;
--	      ignore_char:
--	} while (status & DZ_DVAL);
- 
--	if (tty)
--		tty_flip_buffer_push(tty);
-+		/* keep track of the statistics */
-+		switch (flag) {
-+		case TTY_FRAME:
-+			icount->frame++;
-+			break;
-+		case TTY_PARITY:
-+			icount->parity++;
-+			break;
-+		case TTY_OVERRUN:
-+			icount->overrun++;
-+			break;
-+		case TTY_BREAK:
-+			icount->brk++;
-+			break;
-+		default:
-+			break;
-+		}
-+
-+		if ((status & info->ignore_status_mask) == 0) {
-+			tty_insert_flip_char(tty, ch, flag);
-+			lines_rx[LINE(status)] = 1;
-+		}
-+	}
-+	for (i = 0; i < DZ_NB_PORT; i++)
-+		if (lines_rx[i])
-+			tty_flip_buffer_push(lines[i]->tty);
- }
- 
- /*
-@@ -292,20 +314,34 @@
-  * This routine deals with outputs to any lines.
-  * ------------------------------------------------------------
-  */
--static inline void transmit_chars(struct dz_serial *info)
-+static inline void transmit_chars(struct dz_serial *info_in)
- {
-+	struct dz_serial *info;
-+	unsigned short status;
- 	unsigned char tmp;
- 
-+	status = dz_in(info_in, DZ_CSR);
-+	info = lines[LINE(status)];
- 
-+	if (info->hook || !info->tty) {
-+		unsigned short mask, tmp;
- 
--	if (info->x_char) {	/* XON/XOFF chars */
-+		mask = 1 << info->line;
-+		tmp = dz_in(info, DZ_TCR);	/* read the TX flag */
-+		tmp &= ~mask;			/* clear the TX flag */
-+		dz_out(info, DZ_TCR, tmp);
-+		return;
-+	}
-+
-+	if (info->x_char) {			/* XON/XOFF chars */
- 		dz_out(info, DZ_TDR, info->x_char);
- 		info->icount.tx++;
- 		info->x_char = 0;
- 		return;
- 	}
- 	/* if nothing to do or stopped or hardware stopped */
--	if ((info->xmit_cnt <= 0) || info->tty->stopped || info->tty->hw_stopped) {
-+	if (info->xmit_cnt <= 0 ||
-+	    info->tty->stopped || info->tty->hw_stopped) {
- 		dz_stop(info->tty);
- 		return;
- 	}
-@@ -359,15 +395,14 @@
-  */
- static void dz_interrupt(int irq, void *dev, struct pt_regs *regs)
- {
--	struct dz_serial *info;
-+	struct dz_serial *info = (struct dz_serial *)dev;
- 	unsigned short status;
- 
- 	/* get the reason why we just got an irq */
--	status = dz_in((struct dz_serial *) dev, DZ_CSR);
--	info = lines[LINE(status)];	/* re-arrange info the proper port */
-+	status = dz_in(info, DZ_CSR);
- 
- 	if (status & DZ_RDONE)
--		receive_chars(info);	/* the receive function */
-+		receive_chars(info, regs);
- 
- 	if (status & DZ_TRDY)
- 		transmit_chars(info);
-@@ -514,7 +549,7 @@
- 
- 
- 	info->cflags &= ~DZ_CREAD;	/* turn off receive enable flag */
--	dz_out(info, DZ_LPR, info->cflags);
-+	dz_out(info, DZ_LPR, info->cflags | info->line);
- 
- 	if (info->xmit_buf) {	/* free Tx buffer */
- 		free_page((unsigned long) info->xmit_buf);
-@@ -545,18 +580,21 @@
- {
- 	unsigned long flags;
- 	unsigned cflag;
--	int baud;
-+	int baud, i;
- 
--	if (!info->tty || !info->tty->termios)
--		return;
-+	if (!info->hook) {
-+		if (!info->tty || !info->tty->termios)
-+			return;
-+		cflag = info->tty->termios->c_cflag;
-+	} else {
-+		cflag = info->hook->cflags;
-+	}
- 
- 	save_flags(flags);
- 	cli();
- 
- 	info->cflags = info->line;
- 
--	cflag = info->tty->termios->c_cflag;
--
- 	switch (cflag & CSIZE) {
- 	case CS5:
- 		info->cflags |= DZ_CS5;
-@@ -579,7 +617,16 @@
- 	if (cflag & PARODD)
- 		info->cflags |= DZ_PARODD;
- 
--	baud = tty_get_baud_rate(info->tty);
-+	i = cflag & CBAUD;
-+	if (i & CBAUDEX) {
-+		i &= ~CBAUDEX;
-+		if (!info->hook)
-+			info->tty->termios->c_cflag &= ~CBAUDEX;
-+		else
-+			info->hook->cflags &= ~CBAUDEX;
-+	}
-+        baud = baud_table[i];
-+
- 	switch (baud) {
- 	case 50:
- 		info->cflags |= DZ_B50;
-@@ -629,16 +676,16 @@
- 	}
- 
- 	info->cflags |= DZ_RXENAB;
--	dz_out(info, DZ_LPR, info->cflags);
-+	dz_out(info, DZ_LPR, info->cflags | info->line);
- 
- 	/* setup accept flag */
- 	info->read_status_mask = DZ_OERR;
--	if (I_INPCK(info->tty))
-+	if (info->tty && I_INPCK(info->tty))
- 		info->read_status_mask |= (DZ_FERR | DZ_PERR);
- 
- 	/* characters to ignore */
- 	info->ignore_status_mask = 0;
--	if (I_IGNPAR(info->tty))
-+	if (info->tty && I_IGNPAR(info->tty))
- 		info->ignore_status_mask |= (DZ_FERR | DZ_PERR);
- 
- 	restore_flags(flags);
-@@ -694,7 +741,7 @@
- 
- 		down(&tmp_buf_sem);
- 		while (1) {
--			c = MIN(count, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head));
-+			c = min(count, min(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head));
- 			if (c <= 0)
- 				break;
- 
-@@ -707,7 +754,7 @@
- 			save_flags(flags);
- 			cli();
- 
--			c = MIN(c, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head));
-+			c = min(c, min(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head));
- 			memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
- 			info->xmit_head = ((info->xmit_head + c) & (DZ_XMIT_SIZE - 1));
- 			info->xmit_cnt += c;
-@@ -727,7 +774,7 @@
- 			save_flags(flags);
- 			cli();
- 
--			c = MIN(count, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head));
-+			c = min(count, min(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head));
- 			if (c <= 0) {
- 				restore_flags(flags);
- 				break;
-@@ -845,7 +892,7 @@
- 
- /*
-  * ------------------------------------------------------------
-- * rs_ioctl () and friends
-+ * dz_ioctl () and friends
-  * ------------------------------------------------------------
-  */
- static int get_serial_info(struct dz_serial *info,
-@@ -958,6 +1005,9 @@
- 	struct dz_serial *info = (struct dz_serial *) tty->driver_data;
- 	int retval;
- 
-+	if (info->hook)
-+		return -ENODEV;
-+
- 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- 	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
- 	    (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
-@@ -1252,19 +1302,14 @@
- 	int retval, line;
- 
- 	line = MINOR(tty->device) - tty->driver.minor_start;
--
--	/* The dz lines for the mouse/keyboard must be
--	 * opened using their respective drivers.
--	 */
- 	if ((line < 0) || (line >= DZ_NB_PORT))
- 		return -ENODEV;
-+	info = lines[line];
- 
--	if ((line == DZ_KEYBOARD) || (line == DZ_MOUSE))
-+	if (info->hook)
- 		return -ENODEV;
- 
--	info = lines[line];
- 	info->count++;
--
- 	tty->driver_data = info;
- 	info->tty = tty;
- 
-@@ -1285,14 +1330,21 @@
- 		else
- 			*tty->termios = info->callout_termios;
- 		change_speed(info);
--
- 	}
-+#ifdef CONFIG_SERIAL_DEC_CONSOLE
-+	if (dz_sercons.cflag && dz_sercons.index == line) {
-+		tty->termios->c_cflag = dz_sercons.cflag;
-+		dz_sercons.cflag = 0;
-+		change_speed(info);
-+        }
-+#endif
-+
- 	info->session = current->session;
- 	info->pgrp = current->pgrp;
- 	return 0;
- }
- 
--static void show_serial_version(void)
-+static void __init show_serial_version(void)
- {
- 	printk("%s%s\n", dz_name, dz_version);
- }
-@@ -1300,7 +1352,6 @@
- int __init dz_init(void)
- {
- 	int i;
--	long flags;
- 	struct dz_serial *info;
- 
- 	/* Setup base handler, and timer table. */
-@@ -1311,9 +1362,9 @@
- 	memset(&serial_driver, 0, sizeof(struct tty_driver));
- 	serial_driver.magic = TTY_DRIVER_MAGIC;
- #if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS))
--	serial_driver.name = "ttyS";
--#else
- 	serial_driver.name = "tts/%d";
-+#else
-+	serial_driver.name = "ttyS";
- #endif
- 	serial_driver.major = TTY_MAJOR;
- 	serial_driver.minor_start = 64;
-@@ -1352,9 +1403,9 @@
- 	 */
- 	callout_driver = serial_driver;
- #if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS))
--	callout_driver.name = "cua";
--#else
- 	callout_driver.name = "cua/%d";
-+#else
-+	callout_driver.name = "cua";
- #endif
- 	callout_driver.major = TTYAUX_MAJOR;
- 	callout_driver.subtype = SERIAL_TYPE_CALLOUT;
-@@ -1363,25 +1414,27 @@
- 		panic("Couldn't register serial driver");
- 	if (tty_register_driver(&callout_driver))
- 		panic("Couldn't register callout driver");
--	save_flags(flags);
--	cli();
- 
- 	for (i = 0; i < DZ_NB_PORT; i++) {
- 		info = &multi[i];
- 		lines[i] = info;
--		info->magic = SERIAL_MAGIC;
--
-+		info->tty = 0;
-+		info->x_char = 0;
- 		if (mips_machtype == MACH_DS23100 ||
- 		    mips_machtype == MACH_DS5100)
- 			info->port = (unsigned long) KN01_DZ11_BASE;
- 		else
- 			info->port = (unsigned long) KN02_DZ11_BASE;
--
- 		info->line = i;
--		info->tty = 0;
-+
-+		if (info->hook && info->hook->init_info) {
-+			(*info->hook->init_info)(info);
-+			continue;
-+		}
-+
-+		info->magic = SERIAL_MAGIC;
- 		info->close_delay = 50;
- 		info->closing_wait = 3000;
--		info->x_char = 0;
- 		info->event = 0;
- 		info->count = 0;
- 		info->blocked_open = 0;
-@@ -1393,25 +1446,16 @@
- 		info->normal_termios = serial_driver.init_termios;
- 		init_waitqueue_head(&info->open_wait);
- 		init_waitqueue_head(&info->close_wait);
--
--		/*
--		 * If we are pointing to address zero then punt - not correctly
--		 * set up in setup.c to handle this.
--		 */
--		if (!info->port)
--			return 0;
--
--		printk("ttyS%02d at 0x%08x (irq = %d)\n", info->line,
--		       info->port, dec_interrupt[DEC_IRQ_DZ11]);
--
-+		printk("ttyS%02d at 0x%08x (irq = %d) is a DC7085 DZ\n",
-+		       info->line, info->port, dec_interrupt[DEC_IRQ_DZ11]);
- 		tty_register_devfs(&serial_driver, 0,
--				 serial_driver.minor_start + info->line);
-+				   serial_driver.minor_start + info->line);
- 		tty_register_devfs(&callout_driver, 0,
--				callout_driver.minor_start + info->line);
-+				   callout_driver.minor_start + info->line);
- 	}
- 
--	/* reset the chip */
- #ifndef CONFIG_SERIAL_DEC_CONSOLE
-+	/* reset the chip */
- 	dz_out(info, DZ_CSR, DZ_CLR);
- 	while (dz_in(info, DZ_CSR) & DZ_CLR);
- 	iob();
-@@ -1420,43 +1464,104 @@
- 	dz_out(info, DZ_CSR, DZ_MSE);
- #endif
- 
--	/* order matters here... the trick is that flags
--	   is updated... in request_irq - to immediatedly obliterate
--	   it is unwise. */
--	restore_flags(flags);
--
--
- 	if (request_irq(dec_interrupt[DEC_IRQ_DZ11], dz_interrupt,
--			SA_INTERRUPT, "DZ", lines[0]))
-+			0, "DZ", lines[0]))
- 		panic("Unable to register DZ interrupt");
- 
-+	for (i = 0; i < DZ_NB_PORT; i++)
-+		if (lines[i]->hook) {
-+			startup(lines[i]);
-+			if (lines[i]->hook->init_channel)
-+				(*lines[i]->hook->init_channel)(lines[i]);
-+		}
-+
- 	return 0;
- }
- 
--#ifdef CONFIG_SERIAL_DEC_CONSOLE
--static void dz_console_put_char(unsigned char ch)
-+/*
-+ * polling I/O routines
-+ */
-+static int dz_poll_tx_char(void *handle, unsigned char ch)
- {
- 	unsigned long flags;
--	int loops = 2500;
--	unsigned short tmp = ch;
--	/* this code sends stuff out to serial device - spinning its
--	   wheels and waiting. */
-+	struct dz_serial *info = handle;
-+	unsigned short csr, tcr, trdy, mask;
-+	int loops = 10000;
-+	int ret;
- 
--	/* force the issue - point it at lines[3] */
--	dz_console = &multi[CONSOLE_LINE];
-+	local_irq_save(flags);
-+	csr = dz_in(info, DZ_CSR);
-+	dz_out(info, DZ_CSR, csr & ~DZ_TIE);
-+	tcr = dz_in(info, DZ_TCR);
-+	tcr |= 1 << info->line;
-+	mask = tcr;
-+	dz_out(info, DZ_TCR, mask);
-+	iob();
-+	local_irq_restore(flags);
- 
--	save_flags(flags);
--	cli();
-+	while (loops--) {
-+		trdy = dz_in(info, DZ_CSR);
-+		if (!(trdy & DZ_TRDY))
-+			continue;
-+		trdy = (trdy & DZ_TLINE) >> 8;
-+		if (trdy == info->line)
-+			break;
-+		mask &= ~(1 << trdy);
-+		dz_out(info, DZ_TCR, mask);
-+		iob();
-+		udelay(2);
-+	}
- 
-+	if (loops) {
-+		dz_out(info, DZ_TDR, ch);
-+		ret = 0;
-+	} else
-+		ret = -EAGAIN;
- 
--	/* spin our wheels */
--	while (((dz_in(dz_console, DZ_CSR) & DZ_TRDY) != DZ_TRDY) && loops--);
-+	dz_out(info, DZ_TCR, tcr);
-+	dz_out(info, DZ_CSR, csr);
- 
--	/* Actually transmit the character. */
--	dz_out(dz_console, DZ_TDR, tmp);
-+	return ret;
-+}
- 
--	restore_flags(flags);
-+static int dz_poll_rx_char(void *handle)
-+{
-+	return -ENODEV;
-+}
-+
-+int register_dz_hook(unsigned int channel, struct dec_serial_hook *hook)
-+{
-+	struct dz_serial *info = multi + channel;
-+
-+	if (info->hook) {
-+		printk("%s: line %d has already a hook registered\n",
-+		       __FUNCTION__, channel);
-+
-+		return 0;
-+	} else {
-+		hook->poll_rx_char = dz_poll_rx_char;
-+		hook->poll_tx_char = dz_poll_tx_char;
-+		info->hook = hook;
-+
-+		return 1;
-+	}
-+}
-+
-+int unregister_dz_hook(unsigned int channel)
-+{
-+	struct dz_serial *info = &multi[channel];
-+
-+	if (info->hook) {
-+		info->hook = NULL;
-+		return 1;
-+	} else {
-+		printk("%s: trying to unregister hook on line %d,"
-+		       " but none is registered\n", __FUNCTION__, channel);
-+		return 0;
-+	}
- }
-+
-+#ifdef CONFIG_SERIAL_DEC_CONSOLE
- /* 
-  * -------------------------------------------------------------------
-  * dz_console_print ()
-@@ -1465,17 +1570,19 @@
-  * The console must be locked when we get here.
-  * ------------------------------------------------------------------- 
-  */
--static void dz_console_print(struct console *cons,
-+static void dz_console_print(struct console *co,
- 			     const char *str,
- 			     unsigned int count)
- {
-+	struct dz_serial *info = multi + co->index;
-+
- #ifdef DEBUG_DZ
- 	prom_printf((char *) str);
- #endif
- 	while (count--) {
- 		if (*str == '\n')
--			dz_console_put_char('\r');
--		dz_console_put_char(*str++);
-+			dz_poll_tx_char(info, '\r');
-+		dz_poll_tx_char(info, *str++);
- 	}
- }
- 
-@@ -1486,12 +1593,12 @@
- 
- static int __init dz_console_setup(struct console *co, char *options)
- {
-+	struct dz_serial *info = multi + co->index;
- 	int baud = 9600;
- 	int bits = 8;
- 	int parity = 'n';
- 	int cflag = CREAD | HUPCL | CLOCAL;
- 	char *s;
--	unsigned short mask, tmp;
- 
- 	if (options) {
- 		baud = simple_strtoul(options, NULL, 10);
-@@ -1542,44 +1649,31 @@
- 	}
- 	co->cflag = cflag;
- 
--	/* TOFIX: force to console line */
--	dz_console = &multi[CONSOLE_LINE];
- 	if ((mips_machtype == MACH_DS23100) || (mips_machtype == MACH_DS5100))
--		dz_console->port = KN01_DZ11_BASE;
-+		info->port = KN01_DZ11_BASE;
- 	else
--		dz_console->port = KN02_DZ11_BASE;
--	dz_console->line = CONSOLE_LINE;
-+		info->port = KN02_DZ11_BASE;
-+	info->line = co->index;
- 
--	dz_out(dz_console, DZ_CSR, DZ_CLR);
--	while ((tmp = dz_in(dz_console, DZ_CSR)) & DZ_CLR);
-+	dz_out(info, DZ_CSR, DZ_CLR);
-+	while (dz_in(info, DZ_CSR) & DZ_CLR);
- 
- 	/* enable scanning */
--	dz_out(dz_console, DZ_CSR, DZ_MSE);
-+	dz_out(info, DZ_CSR, DZ_MSE);
- 
- 	/*  Set up flags... */
--	dz_console->cflags = 0;
--	dz_console->cflags |= DZ_B9600;
--	dz_console->cflags |= DZ_CS8;
--	dz_console->cflags |= DZ_PARENB;
--	dz_out(dz_console, DZ_LPR, dz_console->cflags);
--
--	mask = 1 << dz_console->line;
--	tmp = dz_in(dz_console, DZ_TCR);	/* read the TX flag */
--	if (!(tmp & mask)) {
--		tmp |= mask;	/* set the TX flag */
--		dz_out(dz_console, DZ_TCR, tmp);
--	}
-+	dz_out(info, DZ_LPR, cflag | info->line);
-+
- 	return 0;
- }
- 
--static struct console dz_sercons =
--{
--    .name	= "ttyS",
--    .write	= dz_console_print,
--    .device	= dz_console_device,
--    .setup	= dz_console_setup,
--    .flags	= CON_CONSDEV | CON_PRINTBUFFER,
--    .index	= CONSOLE_LINE,
-+static struct console dz_sercons = {
-+	.name	= "ttyS",
-+	.write	= dz_console_print,
-+	.device	= dz_console_device,
-+	.setup	= dz_console_setup,
-+	.flags	= CON_PRINTBUFFER,
-+	.index	= -1,
- };
- 
- void __init dz_serial_console_init(void)
-diff -Nur linux-2.4.32-rc1/drivers/char/dz.h linux-2.4.32-rc1.mips/drivers/char/dz.h
---- linux-2.4.32-rc1/drivers/char/dz.h	2002-08-03 02:39:43.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/char/dz.h	2004-09-28 02:53:01.000000000 +0200
-@@ -10,6 +10,8 @@
- #ifndef DZ_SERIAL_H
- #define DZ_SERIAL_H
- 
-+#include <asm/dec/serial.h>
-+
- #define SERIAL_MAGIC 0x5301
- 
- /*
-@@ -17,6 +19,7 @@
-  */
- #define DZ_TRDY        0x8000                 /* Transmitter empty */
- #define DZ_TIE         0x4000                 /* Transmitter Interrupt Enable */
-+#define DZ_TLINE       0x0300                 /* Transmitter Line Number */
- #define DZ_RDONE       0x0080                 /* Receiver data ready */
- #define DZ_RIE         0x0040                 /* Receive Interrupt Enable */
- #define DZ_MSE         0x0020                 /* Master Scan Enable */
-@@ -37,19 +40,30 @@
- #define UCHAR(x) (unsigned char)(x & DZ_RBUF_MASK)
- 
- /*
-- * Definitions for the Transmit Register.
-+ * Definitions for the Transmit Control Register.
-  */
- #define DZ_LINE_KEYBOARD 0x0001
- #define DZ_LINE_MOUSE    0x0002
- #define DZ_LINE_MODEM    0x0004
- #define DZ_LINE_PRINTER  0x0008
- 
-+#define DZ_MODEM_RTS     0x0800               /* RTS for the modem line (2) */
- #define DZ_MODEM_DTR     0x0400               /* DTR for the modem line (2) */
-+#define DZ_PRINT_RTS     0x0200               /* RTS for the printer line (3) */
-+#define DZ_PRINT_DTR     0x0100               /* DTR for the printer line (3) */
-+#define DZ_LNENB         0x000f               /* Transmitter Line Enable */
- 
- /*
-  * Definitions for the Modem Status Register.
-  */
-+#define DZ_MODEM_RI      0x0800               /* RI for the modem line (2) */
-+#define DZ_MODEM_CD      0x0400               /* CD for the modem line (2) */
- #define DZ_MODEM_DSR     0x0200               /* DSR for the modem line (2) */
-+#define DZ_MODEM_CTS     0x0100               /* CTS for the modem line (2) */
-+#define DZ_PRINT_RI      0x0008               /* RI for the printer line (2) */
-+#define DZ_PRINT_CD      0x0004               /* CD for the printer line (2) */
-+#define DZ_PRINT_DSR     0x0002               /* DSR for the printer line (2) */
-+#define DZ_PRINT_CTS     0x0001               /* CTS for the printer line (2) */
- 
- /*
-  * Definitions for the Transmit Data Register.
-@@ -115,9 +129,6 @@
- 
- #define DZ_EVENT_WRITE_WAKEUP   0
- 
--#ifndef MIN
--#define MIN(a,b)        ((a) < (b) ? (a) : (b))
--
- #define DZ_INITIALIZED       0x80000000 /* Serial port was initialized */
- #define DZ_CALLOUT_ACTIVE    0x40000000 /* Call out device is active */
- #define DZ_NORMAL_ACTIVE     0x20000000 /* Normal device is active */
-@@ -129,6 +140,7 @@
- #define DZ_CLOSING_WAIT_INF  0
- #define DZ_CLOSING_WAIT_NONE 65535
- 
-+#define DZ_SAK             0x0004 /* Secure Attention Key (Orange book) */
- #define DZ_SPLIT_TERMIOS   0x0008 /* Separate termios for dialin/callout */
- #define DZ_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
- #define DZ_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
-@@ -166,79 +178,9 @@
-   long                    session;             /* Session of opening process */
-   long                    pgrp;                /* pgrp of opening process */
- 
-+  struct dec_serial_hook  *hook;               /* Hook on this channel.  */
-   unsigned char           is_console;          /* flag indicating a serial console */
-   unsigned char           is_initialized;
- };
- 
--static struct dz_serial multi[DZ_NB_PORT];    /* Four serial lines in the DZ chip */
--static struct dz_serial *dz_console;
--static struct tty_driver serial_driver, callout_driver;
--
--static struct tty_struct *serial_table[DZ_NB_PORT];
--static struct termios *serial_termios[DZ_NB_PORT];
--static struct termios *serial_termios_locked[DZ_NB_PORT];
--
--static int serial_refcount;
--
--/*
-- * tmp_buf is used as a temporary buffer by serial_write.  We need to
-- * lock it in case the copy_from_user blocks while swapping in a page,
-- * and some other program tries to do a serial write at the same time.
-- * Since the lock will only come under contention when the system is
-- * swapping and available memory is low, it makes sense to share one
-- * buffer across all the serial ports, since it significantly saves
-- * memory if large numbers of serial ports are open.
-- */
--static unsigned char *tmp_buf;
--static DECLARE_MUTEX(tmp_buf_sem);
--
--static char *dz_name = "DECstation DZ serial driver version ";
--static char *dz_version = "1.02";
--
--static inline unsigned short dz_in (struct dz_serial *, unsigned);
--static inline void dz_out (struct dz_serial *, unsigned, unsigned short);
--
--static inline void dz_sched_event (struct dz_serial *, int);
--static inline void receive_chars (struct dz_serial *);
--static inline void transmit_chars (struct dz_serial *);
--static inline void check_modem_status (struct dz_serial *);
--
--static void dz_stop (struct tty_struct *);
--static void dz_start (struct tty_struct *);
--static void dz_interrupt (int, void *, struct pt_regs *);
--static void do_serial_bh (void);
--static void do_softint (void *);
--static void do_serial_hangup (void *);
--static void change_speed (struct dz_serial *);
--static void dz_flush_chars (struct tty_struct *);
--static void dz_console_print (struct console *, const char *, unsigned int);
--static void dz_flush_buffer (struct tty_struct *);
--static void dz_throttle (struct tty_struct *);
--static void dz_unthrottle (struct tty_struct *);
--static void dz_send_xchar (struct tty_struct *, char);
--static void shutdown (struct dz_serial *);
--static void send_break (struct dz_serial *, int);
--static void dz_set_termios (struct tty_struct *, struct termios *);
--static void dz_close (struct tty_struct *, struct file *);
--static void dz_hangup (struct tty_struct *);
--static void show_serial_version (void);
--
--static int dz_write (struct tty_struct *, int, const unsigned char *, int);
--static int dz_write_room (struct tty_struct *);
--static int dz_chars_in_buffer (struct tty_struct *);
--static int startup (struct dz_serial *);
--static int get_serial_info (struct dz_serial *, struct serial_struct *);
--static int set_serial_info (struct dz_serial *, struct serial_struct *);
--static int get_lsr_info (struct dz_serial *, unsigned int *);
--static int dz_ioctl (struct tty_struct *, struct file *, unsigned int, unsigned long);
--static int block_til_ready (struct tty_struct *, struct file *, struct dz_serial *);
--static int dz_open (struct tty_struct *, struct file *);
--
--#ifdef MODULE
--int init_module (void)
--void cleanup_module (void)
--#endif
--
--#endif
--
- #endif /* DZ_SERIAL_H */
-diff -Nur linux-2.4.32-rc1/drivers/char/ibm_workpad_keymap.map linux-2.4.32-rc1.mips/drivers/char/ibm_workpad_keymap.map
---- linux-2.4.32-rc1/drivers/char/ibm_workpad_keymap.map	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/char/ibm_workpad_keymap.map	2003-12-20 15:20:44.000000000 +0100
-@@ -0,0 +1,343 @@
-+# Keymap for IBM Workpad z50
-+# US Mapping
-+#
-+# by Michael Klar <wyldfier@iname.com>
-+#
-+# This is a great big mess on account of how the Caps Lock key is handled as
-+# LeftShift-RightShift.  Right shift key had to be broken out, so don't use
-+# use this map file as a basis for other keyboards that don't do the same
-+# thing with Caps Lock.
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License.  See the file "COPYING" in the main directory of this archive
-+# for more details.
-+
-+keymaps 0-2,4-5,8,12,32-33,36-37
-+strings as usual
-+
-+keycode 0 = F1 F11 Console_13
-+	shiftr keycode 0 = F11
-+	shift shiftr keycode 0 = F11
-+	control keycode 0 = F1
-+	alt keycode 0 = Console_1
-+	control alt keycode 0 = Console_1
-+keycode 1 = F3 F13 Console_15
-+	shiftr keycode 1 = F13
-+	shift shiftr keycode 1 = F13
-+	control keycode 1 = F3
-+	alt keycode 1 = Console_3
-+	control alt keycode 1 = Console_3
-+keycode 2 = F5 F15 Console_17
-+	shiftr keycode 2 = F15
-+	shift shiftr keycode 2 = F15
-+	control keycode 2 = F5
-+	alt keycode 2 = Console_5
-+	control alt keycode 2 = Console_5
-+keycode 3 = F7 F17 Console_19
-+	shiftr keycode 3 = F17
-+	shift shiftr keycode 3 = F17
-+	control keycode 3 = F7
-+	alt keycode 3 = Console_7
-+	control alt keycode 3 = Console_7
-+keycode 4 = F9 F19 Console_21
-+	shiftr keycode 4 = F19
-+	shift shiftr keycode 4 = F19
-+	control keycode 4 = F9
-+	alt keycode 4 = Console_9
-+	control alt keycode 4 = Console_9
-+#keycode 5 is contrast down
-+#keycode 6 is contrast up
-+keycode 7 = F11 F11 Console_23
-+	shiftr keycode 7 = F11
-+	shift shiftr keycode 7 = F11
-+	control keycode 7 = F11
-+	alt keycode 7 = Console_11
-+	control alt keycode 7 = Console_11
-+keycode 8 = F2 F12 Console_14
-+	shiftr keycode 8 = F12
-+	shift shiftr keycode 8 = F12
-+	control keycode 8 = F2
-+	alt keycode 8 = Console_2
-+	control alt keycode 8 = Console_2
-+keycode 9 = F4 F14 Console_16
-+	shiftr keycode 9 = F14
-+	shift shiftr keycode 9 = F14
-+	control keycode 9 = F4
-+	alt keycode 9 = Console_4
-+	control alt keycode 9 = Console_4
-+keycode 10 = F6 F16 Console_18
-+	shiftr keycode 10 = F16
-+	shift shiftr keycode 10 = F16
-+	control keycode 10 = F6
-+	alt keycode 10 = Console_6
-+	control alt keycode 10 = Console_6
-+keycode 11 = F8 F18 Console_20
-+	shiftr keycode 11 = F18
-+	shift shiftr keycode 11 = F18
-+	control keycode 11 = F8
-+	alt keycode 11 = Console_8
-+	control alt keycode 11 = Console_8
-+keycode 12 = F10 F20 Console_22
-+	shiftr keycode 12 = F20
-+	shift shiftr keycode 12 = F20
-+	control keycode 12 = F10
-+	alt keycode 12 = Console_10
-+	control alt keycode 12 = Console_10
-+#keycode 13 is brightness down
-+#keycode 14 is brightness up
-+keycode 15 = F12 F12 Console_24
-+	shiftr keycode 15 = F12
-+	shift shiftr keycode 15 = F12
-+	control keycode 15 = F12
-+	alt keycode 15 = Console_12
-+	control alt keycode 15 = Console_12
-+keycode 16 = apostrophe quotedbl
-+	shiftr keycode 16 = quotedbl
-+	shift shiftr keycode 16 = quotedbl
-+	control keycode 16 = Control_g
-+	alt keycode 16 = Meta_apostrophe
-+keycode 17 = bracketleft braceleft
-+	shiftr keycode 17 = braceleft
-+	shift shiftr keycode 17 = braceleft
-+	control keycode 17 = Escape
-+	alt keycode 17 = Meta_bracketleft
-+keycode 18 = minus underscore backslash       
-+	shiftr keycode 18 = underscore
-+	shift shiftr keycode 18 = underscore
-+	control keycode 18 = Control_underscore
-+	shift control keycode 18 = Control_underscore
-+	shiftr control keycode 18 = Control_underscore
-+	shift shiftr control keycode 18 = Control_underscore
-+	alt keycode 18 = Meta_minus
-+keycode 19 = zero parenright braceright
-+	shiftr keycode 19 = parenright
-+	shift shiftr keycode 19 = parenright
-+	alt keycode 19 = Meta_zero
-+keycode 20 = p
-+	shiftr keycode 20 = +P
-+	shift shiftr keycode 20 = +p
-+keycode 21 = semicolon colon
-+	shiftr keycode 21 = colon
-+	shift shiftr keycode 21 = colon
-+	alt keycode 21 = Meta_semicolon
-+keycode 22 = Up Scroll_Backward
-+	shiftr keycode 22 = Scroll_Backward
-+	shift shiftr keycode 22 = Scroll_Backward
-+	alt keycode 22 = Prior
-+keycode 23 = slash question
-+	shiftr keycode 23 = question
-+	shift shiftr keycode 23 = question
-+	control keycode 23 = Delete
-+	alt keycode 23 = Meta_slash
-+
-+keycode 27 = nine parenleft bracketright
-+	shiftr keycode 27 = parenleft
-+	shift shiftr keycode 27 = parenleft
-+	alt keycode 27 = Meta_nine
-+keycode 28 = o
-+	shiftr keycode 28 = +O
-+	shift shiftr keycode 28 = +o
-+keycode 29 = l
-+	shiftr keycode 29 = +L
-+	shift shiftr keycode 29 = +l
-+keycode 30 = period greater
-+	shiftr keycode 30 = greater
-+	shift shiftr keycode 30 = greater
-+	control keycode 30 = Compose
-+	alt keycode 30 = Meta_period
-+
-+keycode 32 = Left Decr_Console
-+	shiftr keycode 32 = Decr_Console
-+	shift shiftr keycode 32 = Decr_Console
-+	alt keycode 32 = Home
-+keycode 33 = bracketright braceright asciitilde      
-+	shiftr keycode 33 = braceright
-+	shift shiftr keycode 33 = braceright
-+	control keycode 33 = Control_bracketright
-+	alt keycode 33 = Meta_bracketright
-+keycode 34 = equal plus
-+	shiftr keycode 34 = plus
-+	shift shiftr keycode 34 = plus
-+	alt keycode 34 = Meta_equal
-+keycode 35 = eight asterisk bracketleft
-+	shiftr keycode 35 = asterisk
-+	shift shiftr keycode 35 = asterisk
-+	control keycode 35 = Delete
-+	alt keycode 35 = Meta_eight
-+keycode 36 = i
-+	shiftr keycode 36 = +I
-+	shift shiftr keycode 36 = +i
-+keycode 37 = k
-+	shiftr keycode 37 = +K
-+	shift shiftr keycode 37 = +k
-+keycode 38 = comma less
-+	shiftr keycode 38 = less
-+	shift shiftr keycode 38 = less
-+	alt keycode 38 = Meta_comma
-+
-+keycode 40 = h
-+	shiftr keycode 40 = +H
-+	shift shiftr keycode 40 = +h
-+keycode 41 = y
-+	shiftr keycode 41 = +Y
-+	shift shiftr keycode 41 = +y
-+keycode 42 = six asciicircum
-+	shiftr keycode 42 = asciicircum
-+	shift shiftr keycode 42 = asciicircum
-+	control keycode 42 = Control_asciicircum
-+	alt keycode 42 = Meta_six
-+keycode 43 = seven ampersand braceleft
-+	shiftr keycode 43 = ampersand
-+	shift shiftr keycode 43 = ampersand
-+	control keycode 43 = Control_underscore
-+	alt keycode 43 = Meta_seven
-+keycode 44 = u
-+	shiftr keycode 44 = +U
-+	shift shiftr keycode 44 = +u
-+keycode 45 = j
-+	shiftr keycode 45 = +J
-+	shift shiftr keycode 45 = +j
-+keycode 46 = m
-+	shiftr keycode 46 = +M
-+	shift shiftr keycode 46 = +m
-+keycode 47 = n
-+	shiftr keycode 47 = +N
-+	shift shiftr keycode 47 = +n
-+
-+# This is the "Backspace" key:
-+keycode 49 = Delete Delete
-+	shiftr keycode 49 = Delete
-+	shift shiftr keycode 49 = Delete
-+	control keycode 49 = BackSpace
-+	alt keycode 49 = Meta_Delete
-+keycode 50 = Num_Lock
-+	shift keycode 50 = Bare_Num_Lock
-+	shiftr keycode 50 = Bare_Num_Lock
-+	shift shiftr keycode 50 = Bare_Num_Lock
-+# This is the "Delete" key:
-+keycode 51 = Remove
-+	control alt keycode 51 = Boot
-+
-+keycode 53 = backslash bar
-+	shiftr keycode 53 = bar
-+	shift shiftr keycode 53 = bar
-+	control keycode 53 = Control_backslash
-+	alt keycode 53 = Meta_backslash
-+keycode 54 = Return
-+	alt keycode 54 = Meta_Control_m
-+keycode 55 = space space           
-+	shiftr keycode 55 = space
-+	shift shiftr keycode 55 = space
-+	control keycode 55 = nul
-+	alt keycode 55 = Meta_space
-+keycode 56 = g
-+	shiftr keycode 56 = +G
-+	shift shiftr keycode 56 = +g
-+keycode 57 = t
-+	shiftr keycode 57 = +T
-+	shift shiftr keycode 57 = +t
-+keycode 58 = five percent
-+	shiftr keycode 58 = percent
-+	shift shiftr keycode 58 = percent
-+	control keycode 58 = Control_bracketright
-+	alt keycode 58 = Meta_five
-+keycode 59 = four dollar dollar
-+	shiftr keycode 59 = dollar
-+	shift shiftr keycode 59 = dollar
-+	control keycode 59 = Control_backslash
-+	alt keycode 59 = Meta_four
-+keycode 60 = r
-+	shiftr keycode 60 = +R
-+	shift shiftr keycode 60 = +r
-+keycode 61 = f
-+	shiftr keycode 61 = +F
-+	shift shiftr keycode 61 = +f
-+	altgr keycode 61 = Hex_F
-+keycode 62 = v
-+	shiftr keycode 62 = +V
-+	shift shiftr keycode 62 = +v
-+keycode 63 = b
-+	shiftr keycode 63 = +B
-+	shift shiftr keycode 63 = +b
-+	altgr keycode 63 = Hex_B
-+
-+keycode 67 = three numbersign
-+	shiftr keycode 67 = numbersign
-+	shift shiftr keycode 67 = numbersign
-+	control keycode 67 = Escape
-+	alt keycode 67 = Meta_three
-+keycode 68 = e
-+	shiftr keycode 68 = +E
-+	shift shiftr keycode 68 = +e
-+	altgr keycode 68 = Hex_E
-+keycode 69 = d
-+	shiftr keycode 69 = +D
-+	shift shiftr keycode 69 = +d
-+	altgr keycode 69 = Hex_D
-+keycode 70 = c
-+	shiftr keycode 70 = +C
-+	shift shiftr keycode 70 = +c
-+	altgr keycode 70 = Hex_C
-+keycode 71 = Right Incr_Console
-+	shiftr keycode 71 = Incr_Console
-+	shift shiftr keycode 71 = Incr_Console
-+	alt keycode 71 = End
-+
-+keycode 75 = two at at
-+	shiftr keycode 75 = at
-+	shift shiftr keycode 75 = at
-+	control keycode 75 = nul
-+	shift control keycode 75 = nul
-+	shiftr control keycode 75 = nul
-+	shift shiftr control keycode 75 = nul
-+	alt keycode 75 = Meta_two
-+keycode 76 = w
-+	shiftr keycode 76 = +W
-+	shift shiftr keycode 76 = +w
-+keycode 77 = s
-+	shiftr keycode 77 = +S
-+	shift shiftr keycode 77 = +s
-+keycode 78 = x
-+	shiftr keycode 78 = +X
-+	shift shiftr keycode 78 = +x
-+keycode 79 = Down Scroll_Forward
-+	shiftr keycode 79 = Scroll_Forward
-+	shift shiftr keycode 79 = Scroll_Forward
-+	alt keycode 79 = Next
-+keycode 80 = Escape Escape
-+	shiftr keycode 80 = Escape
-+	shift shiftr keycode 80 = Escape
-+	alt keycode 80 = Meta_Escape
-+keycode 81 = Tab Tab             
-+	shiftr keycode 81 = Tab
-+	shift shiftr keycode 81 = Tab
-+	alt keycode 81 = Meta_Tab
-+keycode 82 = grave asciitilde
-+	shiftr keycode 82 = asciitilde
-+	shift shiftr keycode 82 = asciitilde
-+	control keycode 82 = nul
-+	alt keycode 82 = Meta_grave
-+keycode 83 = one exclam
-+	shiftr keycode 83 = exclam
-+	shift shiftr keycode 83 = exclam
-+	alt keycode 83 = Meta_one
-+keycode 84 = q
-+	shiftr keycode 84 = +Q
-+	shift shiftr keycode 84 = +q
-+keycode 85 = a
-+	shiftr keycode 85 = +A
-+	shift shiftr keycode 85 = +a
-+	altgr keycode 85 = Hex_A
-+keycode 86 = z
-+	shiftr keycode 86 = +Z
-+	shift shiftr keycode 86 = +z
-+
-+# This is the windows key:
-+keycode 88 = Decr_Console
-+keycode 89 = Shift
-+keycode 90 = Control
-+keycode 91 = Control
-+keycode 92 = Alt
-+keycode 93 = AltGr
-+keycode 94 = ShiftR
-+	shift keycode 94 = Caps_Lock
-diff -Nur linux-2.4.32-rc1/drivers/char/indydog.c linux-2.4.32-rc1.mips/drivers/char/indydog.c
---- linux-2.4.32-rc1/drivers/char/indydog.c	2003-08-25 13:44:41.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/char/indydog.c	2004-06-22 17:32:07.000000000 +0200
-@@ -1,5 +1,5 @@
- /*
-- *	IndyDog	0.2	A Hardware Watchdog Device for SGI IP22
-+ *	IndyDog	0.3	A Hardware Watchdog Device for SGI IP22
-  *
-  *	(c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved.
-  *
-@@ -7,10 +7,10 @@
-  *	modify it under the terms of the GNU General Public License
-  *	as published by the Free Software Foundation; either version
-  *	2 of the License, or (at your option) any later version.
-- *	
-+ *
-  *	based on softdog.c by Alan Cox <alan@redhat.com>
-  */
-- 
-+
- #include <linux/module.h>
- #include <linux/config.h>
- #include <linux/types.h>
-@@ -19,13 +19,12 @@
- #include <linux/mm.h>
- #include <linux/miscdevice.h>
- #include <linux/watchdog.h>
--#include <linux/smp_lock.h>
- #include <linux/init.h>
- #include <asm/uaccess.h>
- #include <asm/sgi/mc.h>
- 
--static unsigned long indydog_alive;
--static int expect_close = 0;
-+#define PFX "indydog: "
-+static int indydog_alive;
- 
- #ifdef CONFIG_WATCHDOG_NOWAYOUT
- static int nowayout = 1;
-@@ -33,10 +32,30 @@
- static int nowayout = 0;
- #endif
- 
-+#define WATCHDOG_TIMEOUT 30		/* 30 sec default timeout */
-+
- MODULE_PARM(nowayout,"i");
- MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
- 
--static inline void indydog_ping(void)
-+static void indydog_start(void)
-+{
-+	u32 mc_ctrl0 = sgimc->cpuctrl0;
-+
-+	mc_ctrl0 = sgimc->cpuctrl0 | SGIMC_CCTRL0_WDOG;
-+	sgimc->cpuctrl0 = mc_ctrl0;
-+}
-+
-+static void indydog_stop(void)
-+{
-+	u32 mc_ctrl0 = sgimc->cpuctrl0;
-+
-+	mc_ctrl0 &= ~SGIMC_CCTRL0_WDOG;
-+	sgimc->cpuctrl0 = mc_ctrl0;
-+
-+	printk(KERN_INFO PFX "Stopped watchdog timer.\n");
-+}
-+
-+static void indydog_ping(void)
- {
- 	sgimc->watchdogt = 0;
- }
-@@ -46,18 +65,14 @@
-  */
- static int indydog_open(struct inode *inode, struct file *file)
- {
--	u32 mc_ctrl0;
--	
--	if (test_and_set_bit(0,&indydog_alive))
-+	if (indydog_alive)
- 		return -EBUSY;
- 
--	if (nowayout) {
-+	if (nowayout)
- 		MOD_INC_USE_COUNT;
--	}
- 
- 	/* Activate timer */
--	mc_ctrl0 = sgimc->cpuctrl0 | SGIMC_CCTRL0_WDOG;
--	sgimc->cpuctrl0 = mc_ctrl0;
-+	indydog_start();
- 	indydog_ping();
- 			
- 	indydog_alive = 1;
-@@ -69,63 +84,48 @@
- static int indydog_release(struct inode *inode, struct file *file)
- {
- 	/* Shut off the timer.
--	 * Lock it in if it's a module and we set nowayout. */
--	lock_kernel();
--	if (expect_close) {
--		u32 mc_ctrl0 = sgimc->cpuctrl0;
-+	 * Lock it in if it's a module and we defined ...NOWAYOUT */
-+	if (!nowayout) {
-+		u32 mc_ctrl0 = sgimc->cpuctrl0; 
- 		mc_ctrl0 &= ~SGIMC_CCTRL0_WDOG;
- 		sgimc->cpuctrl0 = mc_ctrl0;
- 		printk(KERN_INFO "Stopped watchdog timer.\n");
--	} else
--		printk(KERN_CRIT "WDT device closed unexpectedly.  WDT will not stop!\n");
--	clear_bit(0, &indydog_alive);
--	unlock_kernel();
-+	}
-+	indydog_alive = 0;
- 
- 	return 0;
- }
- 
- static ssize_t indydog_write(struct file *file, const char *data, size_t len, loff_t *ppos)
- {
--	/*  Can't seek (pwrite) on this device  */
-+	/* Can't seek (pwrite) on this device */
- 	if (ppos != &file->f_pos)
- 		return -ESPIPE;
- 
--	/*
--	 *	Refresh the timer.
--	 */
-+	/* Refresh the timer. */
- 	if (len) {
--		if (!nowayout) {
--			size_t i;
--
--			/* In case it was set long ago */
--			expect_close = 0;
-- 
--			for (i = 0; i != len; i++) {
--				char c;
--				if (get_user(c, data + i))
--					return -EFAULT;
--				if (c == 'V')
--					expect_close = 1;
--			}
--		}
- 		indydog_ping();
--		return 1;
- 	}
--	return 0;
-+	return len;
- }
- 
- static int indydog_ioctl(struct inode *inode, struct file *file,
- 	unsigned int cmd, unsigned long arg)
- {
-+	int options, retval = -EINVAL;
- 	static struct watchdog_info ident = {
--		options: WDIOF_MAGICCLOSE,
--		identity: "Hardware Watchdog for SGI IP22",
-+		.options		= WDIOF_KEEPALIVEPING |
-+					  WDIOF_MAGICCLOSE,
-+		.firmware_version	= 0,
-+		.identity		= "Hardware Watchdog for SGI IP22",
- 	};
-+
- 	switch (cmd) {
- 		default:
- 			return -ENOIOCTLCMD;
- 		case WDIOC_GETSUPPORT:
--			if(copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)))
-+			if (copy_to_user((struct watchdog_info *)arg,
-+					 &ident, sizeof(ident)))
- 				return -EFAULT;
- 			return 0;
- 		case WDIOC_GETSTATUS:
-@@ -134,31 +134,53 @@
- 		case WDIOC_KEEPALIVE:
- 			indydog_ping();
- 			return 0;
-+		case WDIOC_GETTIMEOUT:
-+			return put_user(WATCHDOG_TIMEOUT,(int *)arg);
-+		case WDIOC_SETOPTIONS:
-+		{
-+			if (get_user(options, (int *)arg))
-+				return -EFAULT;
-+
-+			if (options & WDIOS_DISABLECARD) {
-+				indydog_stop();
-+				retval = 0;
-+			}
-+
-+			if (options & WDIOS_ENABLECARD) {
-+				indydog_start();
-+				retval = 0;
-+			}
-+
-+			return retval;
-+		}
- 	}
- }
- 
- static struct file_operations indydog_fops = {
--	owner:		THIS_MODULE,
--	write:		indydog_write,
--	ioctl:		indydog_ioctl,
--	open:		indydog_open,
--	release:	indydog_release,
-+	.owner		= THIS_MODULE,
-+	.write		= indydog_write,
-+	.ioctl		= indydog_ioctl,
-+	.open		= indydog_open,
-+	.release	= indydog_release,
- };
- 
- static struct miscdevice indydog_miscdev = {
--	minor:		WATCHDOG_MINOR,
--	name:		"watchdog",
--	fops:		&indydog_fops,
-+	.minor		= WATCHDOG_MINOR,
-+	.name		= "watchdog",
-+	.fops		= &indydog_fops,
- };
- 
--static const char banner[] __initdata = KERN_INFO "Hardware Watchdog Timer for SGI IP22: 0.2\n";
-+static char banner[] __initdata =
-+	KERN_INFO PFX "Hardware Watchdog Timer for SGI IP22: 0.3\n";
- 
- static int __init watchdog_init(void)
- {
- 	int ret = misc_register(&indydog_miscdev);
--
--	if (ret)
-+	if (ret) {
-+		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-+			WATCHDOG_MINOR, ret);
- 		return ret;
-+	}
- 
- 	printk(banner);
- 
-@@ -172,4 +194,7 @@
- 
- module_init(watchdog_init);
- module_exit(watchdog_exit);
-+
-+MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>");
-+MODULE_DESCRIPTION("Hardware Watchdog Device for SGI IP22");
- MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.32-rc1/drivers/char/ip27-rtc.c linux-2.4.32-rc1.mips/drivers/char/ip27-rtc.c
---- linux-2.4.32-rc1/drivers/char/ip27-rtc.c	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/char/ip27-rtc.c	2004-04-06 03:35:30.000000000 +0200
-@@ -44,6 +44,7 @@
- #include <asm/sn/klconfig.h>
- #include <asm/sn/sn0/ip27.h>
- #include <asm/sn/sn0/hub.h>
-+#include <asm/sn/sn_private.h>
- 
- static int rtc_ioctl(struct inode *inode, struct file *file,
- 		     unsigned int cmd, unsigned long arg);
-@@ -209,11 +210,8 @@
- 
- static int __init rtc_init(void)
- {
--	nasid_t nid;
--
--	nid = get_nasid();
- 	rtc = (struct m48t35_rtc *)
--	    (KL_CONFIG_CH_CONS_INFO(nid)->memory_base + IOC3_BYTEBUS_DEV0);
-+	(KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base + IOC3_BYTEBUS_DEV0);
- 
- 	printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION);
- 	if (misc_register(&rtc_dev)) {
-@@ -325,3 +323,7 @@
- 
- 	rtc_tm->tm_mon--;
- }
-+
-+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
-+MODULE_DESCRIPTION("SGI IP27 M48T35 RTC driver");
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.32-rc1/drivers/char/Makefile linux-2.4.32-rc1.mips/drivers/char/Makefile
---- linux-2.4.32-rc1/drivers/char/Makefile	2004-08-08 01:26:04.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/char/Makefile	2005-02-11 22:09:56.000000000 +0100
-@@ -48,7 +48,12 @@
-     KEYBD    =
-   endif
-   ifeq ($(CONFIG_VR41XX_KIU),y)
--    KEYMAP   =
-+    ifeq ($(CONFIG_IBM_WORKPAD),y)
-+      KEYMAP = ibm_workpad_keymap.o
-+    endif
-+    ifeq ($(CONFIG_VICTOR_MPC30X),y)
-+      KEYMAP = victor_mpc30x_keymap.o
-+    endif
-     KEYBD    = vr41xx_keyb.o
-   endif
- endif
-@@ -251,7 +256,6 @@
- obj-$(CONFIG_RTC) += rtc.o
- obj-$(CONFIG_GEN_RTC) += genrtc.o
- obj-$(CONFIG_EFI_RTC) += efirtc.o
--obj-$(CONFIG_SGI_DS1286) += ds1286.o
- obj-$(CONFIG_MIPS_RTC) += mips_rtc.o
- obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
- ifeq ($(CONFIG_PPC),)
-@@ -259,6 +263,7 @@
- endif
- obj-$(CONFIG_TOSHIBA) += toshiba.o
- obj-$(CONFIG_I8K) += i8k.o
-+obj-$(CONFIG_DS1286) += ds1286.o
- obj-$(CONFIG_DS1620) += ds1620.o
- obj-$(CONFIG_DS1742) += ds1742.o
- obj-$(CONFIG_INTEL_RNG) += i810_rng.o
-@@ -269,6 +274,7 @@
- 
- obj-$(CONFIG_ITE_GPIO) += ite_gpio.o
- obj-$(CONFIG_AU1X00_GPIO) += au1000_gpio.o
-+obj-$(CONFIG_AU1550_PSC_SPI) += au1550_psc_spi.o
- obj-$(CONFIG_AU1X00_USB_TTY) += au1000_usbtty.o
- obj-$(CONFIG_AU1X00_USB_RAW) += au1000_usbraw.o
- obj-$(CONFIG_COBALT_LCD) += lcd.o
-@@ -353,3 +359,9 @@
- 
- qtronixmap.c: qtronixmap.map
- 	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
-+
-+ibm_workpad_keymap.c: ibm_workpad_keymap.map
-+	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
-+
-+victor_mpc30x_keymap.c: victor_mpc30x_keymap.map
-+	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
-diff -Nur linux-2.4.32-rc1/drivers/char/mips_rtc.c linux-2.4.32-rc1.mips/drivers/char/mips_rtc.c
---- linux-2.4.32-rc1/drivers/char/mips_rtc.c	2004-01-05 14:53:56.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/char/mips_rtc.c	2004-06-28 14:54:53.000000000 +0200
-@@ -53,14 +53,6 @@
- #include <asm/io.h>
- #include <asm/uaccess.h>
- #include <asm/system.h>
--
--/*
-- * Check machine
-- */
--#if !defined(CONFIG_MIPS) || !defined(CONFIG_NEW_TIME_C)
--#error "This driver is for MIPS machines with CONFIG_NEW_TIME_C defined"
--#endif
--
- #include <asm/time.h>
- 
- static unsigned long rtc_status = 0;	/* bitmapped status byte.       */
-diff -Nur linux-2.4.32-rc1/drivers/char/sb1250_duart.c linux-2.4.32-rc1.mips/drivers/char/sb1250_duart.c
---- linux-2.4.32-rc1/drivers/char/sb1250_duart.c	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/char/sb1250_duart.c	2004-09-17 01:25:44.000000000 +0200
-@@ -328,10 +328,11 @@
- 		if (c <= 0) break;
- 
- 		if (from_user) {
-+			spin_unlock_irqrestore(&us->outp_lock, flags);
- 			if (copy_from_user(us->outp_buf + us->outp_tail, buf, c)) {
--				spin_unlock_irqrestore(&us->outp_lock, flags);
- 				return -EFAULT;
- 			}
-+			spin_lock_irqsave(&us->outp_lock, flags);
- 		} else {
- 			memcpy(us->outp_buf + us->outp_tail, buf, c);
- 		}
-@@ -498,9 +499,31 @@
- 	duart_set_cflag(us->line, tty->termios->c_cflag);
- }
- 
-+static int get_serial_info(uart_state_t *us, struct serial_struct * retinfo) {
-+
-+	struct serial_struct tmp;
-+
-+	memset(&tmp, 0, sizeof(tmp));
-+
-+	tmp.type=PORT_SB1250;
-+	tmp.line=us->line;
-+	tmp.port=A_DUART_CHANREG(tmp.line,0);
-+	tmp.irq=K_INT_UART_0 + tmp.line;
-+	tmp.xmit_fifo_size=16; /* fixed by hw */
-+	tmp.baud_base=5000000;
-+	tmp.io_type=SERIAL_IO_MEM;
-+
-+	if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
-+		return -EFAULT;
-+
-+	return 0;
-+}
-+
- static int duart_ioctl(struct tty_struct *tty, struct file * file,
- 		       unsigned int cmd, unsigned long arg)
- {
-+	uart_state_t *us = (uart_state_t *) tty->driver_data;
-+
- /*	if (serial_paranoia_check(info, tty->device, "rs_ioctl"))
- 	return -ENODEV;*/
- 	switch (cmd) {
-@@ -517,7 +540,7 @@
- 		printk("Ignoring TIOCMSET\n");
- 		break;
- 	case TIOCGSERIAL:
--		printk("Ignoring TIOCGSERIAL\n");
-+		return get_serial_info(us,(struct serial_struct *) arg);
- 		break;
- 	case TIOCSSERIAL:
- 		printk("Ignoring TIOCSSERIAL\n");
-diff -Nur linux-2.4.32-rc1/drivers/char/serial.c linux-2.4.32-rc1.mips/drivers/char/serial.c
---- linux-2.4.32-rc1/drivers/char/serial.c	2005-10-24 11:33:29.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/char/serial.c	2005-09-23 22:41:22.000000000 +0200
-@@ -62,6 +62,12 @@
-  *        Robert Schwebel <robert@schwebel.de>,
-  *        Juergen Beisert <jbeisert@eurodsn.de>,
-  *        Theodore Ts'o <tytso@mit.edu>
-+ *
-+ * 10/00: Added suport for MIPS Atlas board.
-+ * 11/00: Hooks for serial kernel debug port support added.
-+ *        Kevin D. Kissell, kevink@mips.com and Carsten Langgaard,
-+ *        carstenl@mips.com
-+ *        Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
-  */
- 
- static char *serial_version = "5.05c";
-@@ -413,6 +419,22 @@
- 	return 0;
- }
- 
-+#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
-+
-+#include <asm/mips-boards/atlas.h>
-+
-+static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
-+{
-+        return (*(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) & 0xff);
-+}
-+
-+static _INLINE_ void serial_out(struct async_struct *info, int offset, int value)
-+{
-+        *(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) = value;
-+}
-+
-+#else
-+
- static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
- {
- 	switch (info->io_type) {
-@@ -447,6 +469,8 @@
- 		outb(value, info->port+offset);
- 	}
- }
-+#endif
-+
- 
- /*
-  * We used to support using pause I/O for certain machines.  We
-diff -Nur linux-2.4.32-rc1/drivers/char/victor_mpc30x_keymap.map linux-2.4.32-rc1.mips/drivers/char/victor_mpc30x_keymap.map
---- linux-2.4.32-rc1/drivers/char/victor_mpc30x_keymap.map	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/char/victor_mpc30x_keymap.map	2004-02-05 18:04:42.000000000 +0100
-@@ -0,0 +1,102 @@
-+# Victor Interlink MP-C303/304 keyboard keymap
-+#
-+# Copyright (C) 2003  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License.  See the file "COPYING" in the main directory of this archive
-+# for more details.
-+keymaps 0-1,4-5,8-9,12
-+alt_is_meta
-+strings as usual
-+compose as usual for "iso-8859-1"
-+
-+# First line
-+keycode 89 = Escape
-+keycode  9 = Delete
-+
-+# 2nd line
-+keycode 73 = one              exclam
-+keycode 18 = two              quotedbl
-+keycode 92 = three            numbersign
-+	control	keycode 92 = Escape
-+keycode 53 = four             dollar
-+	control	keycode 53 = Control_backslash
-+keycode 21 = five             percent
-+	control	keycode 21 = Control_bracketright
-+keycode 50 = six              ampersand
-+	control	keycode 50 = Control_underscore
-+keycode 48 = seven            apostrophe
-+keycode 51 = eight            parenleft
-+keycode 16 = nine             parenright
-+keycode 80 = zero             asciitilde
-+	control	keycode 80 = nul
-+keycode 49 = minus            equal
-+keycode 30 = asciicircum      asciitilde
-+	control	keycode 30 = Control_asciicircum
-+keycode  5 = backslash        bar
-+	control	keycode  5 = Control_backslash
-+keycode 13 = BackSpace
-+# 3rd line
-+keycode 57 = Tab
-+keycode 74 = q
-+keycode 26 = w
-+keycode 81 = e
-+keycode 29 = r
-+keycode 37 = t
-+keycode 45 = y
-+keycode 72 = u
-+keycode 24 = i
-+keycode 32 = o
-+keycode 41 = p
-+keycode  1 = at               grave
-+	control	keycode  1 = nul
-+keycode 54 = bracketleft      braceleft
-+keycode 63 = Return
-+	alt	keycode 63 = Meta_Control_m
-+# 4th line
-+keycode 23 = Caps_Lock
-+keycode 34 = a
-+keycode 66 = s
-+keycode 52 = d
-+keycode 20 = f
-+keycode 84 = g
-+keycode 67 = h
-+keycode 64 = j
-+keycode 17 = k
-+keycode 83 = l
-+keycode 22 = semicolon        plus
-+keycode 61 = colon            asterisk
-+	control keycode 61 = Control_g
-+keycode 65 = bracketright     braceright
-+	control	keycode 65 = Control_bracketright
-+# 5th line
-+keycode 91 = Shift
-+keycode 76 = z
-+keycode 68 = x
-+keycode 28 = c
-+keycode 36 = v
-+keycode 44 = b
-+keycode 19 = n
-+keycode 27 = m
-+keycode 35 = comma            less
-+keycode  3 = period           greater
-+	control	keycode  3 = Compose
-+keycode 38 = slash            question
-+	control	keycode 38 = Delete
-+	shift	control	keycode 38 = Delete
-+keycode  6 = backslash        underscore
-+	control	keycode  6 = Control_backslash
-+keycode 55 = Up
-+	alt keycode 55 = PageUp
-+keycode 14 = Shift
-+# 6th line
-+keycode 56 = Control
-+keycode 42 = Alt
-+keycode 33 = space
-+	control	keycode 33 = nul
-+keycode  7 = Left
-+	alt keycode  7 = Home
-+keycode 31 = Down
-+	alt keycode 31 = PageDown
-+keycode 47 = Right
-+	alt keycode 47 = End
-diff -Nur linux-2.4.32-rc1/drivers/char/vr41xx_keyb.c linux-2.4.32-rc1.mips/drivers/char/vr41xx_keyb.c
---- linux-2.4.32-rc1/drivers/char/vr41xx_keyb.c	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/char/vr41xx_keyb.c	2004-02-17 13:08:55.000000000 +0100
-@@ -308,7 +308,7 @@
- 			if (found != 0) {
- 				kiu_base = VRC4173_KIU_OFFSET;
- 				mkiuintreg = VRC4173_MKIUINTREG_OFFSET;
--				vrc4173_clock_supply(VRC4173_KIU_CLOCK);
-+				vrc4173_supply_clock(VRC4173_KIU_CLOCK);
- 			}
- 		}
- #endif
-@@ -325,7 +325,7 @@
- 
- 	if (current_cpu_data.cputype == CPU_VR4111 ||
- 	    current_cpu_data.cputype == CPU_VR4121)
--		vr41xx_clock_supply(KIU_CLOCK);
-+		vr41xx_supply_clock(KIU_CLOCK);
- 
- 	kiu_writew(KIURST_KIURST, KIURST);
- 
-diff -Nur linux-2.4.32-rc1/drivers/i2c/Config.in linux-2.4.32-rc1.mips/drivers/i2c/Config.in
---- linux-2.4.32-rc1/drivers/i2c/Config.in	2004-04-14 15:05:29.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/i2c/Config.in	2005-02-11 20:49:04.000000000 +0100
-@@ -57,6 +57,10 @@
-    if [ "$CONFIG_SGI_IP22" = "y" ]; then
-       dep_tristate 'I2C SGI interfaces' CONFIG_I2C_ALGO_SGI $CONFIG_I2C
-    fi
-+
-+   if [ "$CONFIG_SOC_AU1550" = "y" -o "$CONFIG_SOC_AU1200" ]; then
-+      dep_tristate 'Au1550/Au1200 SMBus interface' CONFIG_I2C_ALGO_AU1550 $CONFIG_I2C
-+   fi
-  
- # This is needed for automatic patch generation: sensors code starts here
- # This is needed for automatic patch generation: sensors code ends here
-diff -Nur linux-2.4.32-rc1/drivers/i2c/i2c-algo-au1550.c linux-2.4.32-rc1.mips/drivers/i2c/i2c-algo-au1550.c
---- linux-2.4.32-rc1/drivers/i2c/i2c-algo-au1550.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/i2c/i2c-algo-au1550.c	2005-02-11 20:49:04.000000000 +0100
-@@ -0,0 +1,340 @@
-+/*
-+ * i2c-algo-au1550.c: SMBus (i2c) driver algorithms for Alchemy PSC interface
-+ * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
-+ *
-+ * The documentation describes this as an SMBus controller, but it doesn't
-+ * understand any of the SMBus protocol in hardware.  It's really an I2C
-+ * controller that could emulate most of the SMBus in software.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+
-+#include <asm/au1000.h>
-+#include <asm/au1xxx_psc.h>
-+
-+#include <linux/i2c.h>
-+#include <linux/i2c-algo-au1550.h>
-+
-+static int
-+wait_xfer_done(struct i2c_algo_au1550_data *adap)
-+{
-+	u32	stat;
-+	int	i;
-+	volatile psc_smb_t	*sp;
-+
-+	sp = (volatile psc_smb_t *)(adap->psc_base);
-+
-+	/* Wait for Tx FIFO Underflow.
-+	*/
-+	for (i = 0; i < adap->xfer_timeout; i++) {
-+		stat = sp->psc_smbevnt;
-+		au_sync();
-+		if ((stat & PSC_SMBEVNT_TU) != 0) {
-+			/* Clear it.  */
-+			sp->psc_smbevnt = PSC_SMBEVNT_TU;
-+			au_sync();
-+			return 0;
-+		}
-+		udelay(1);
-+	}
-+
-+	return -ETIMEDOUT;
-+}
-+
-+static int
-+wait_ack(struct i2c_algo_au1550_data *adap)
-+{
-+	u32	stat;
-+	volatile psc_smb_t	*sp;
-+
-+	if (wait_xfer_done(adap))
-+		return -ETIMEDOUT;
-+
-+	sp = (volatile psc_smb_t *)(adap->psc_base);
-+
-+	stat = sp->psc_smbevnt;
-+	au_sync();
-+
-+	if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0)
-+		return -ETIMEDOUT;
-+
-+	return 0;
-+}
-+
-+static int
-+wait_master_done(struct i2c_algo_au1550_data *adap)
-+{
-+	u32	stat;
-+	int	i;
-+	volatile psc_smb_t	*sp;
-+
-+	sp = (volatile psc_smb_t *)(adap->psc_base);
-+
-+	/* Wait for Master Done.
-+	*/
-+	for (i = 0; i < adap->xfer_timeout; i++) {
-+		stat = sp->psc_smbevnt;
-+		au_sync();
-+		if ((stat & PSC_SMBEVNT_MD) != 0)
-+			return 0;
-+		udelay(1);
-+	}
-+
-+	return -ETIMEDOUT;
-+}
-+
-+static int
-+do_address(struct i2c_algo_au1550_data *adap, unsigned int addr, int rd)
-+{
-+	volatile psc_smb_t	*sp;
-+	u32			stat;
-+
-+	sp = (volatile psc_smb_t *)(adap->psc_base);
-+
-+	/* Reset the FIFOs, clear events.
-+	*/
-+	sp->psc_smbpcr = PSC_SMBPCR_DC;
-+	sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR;
-+	au_sync();
-+	do {
-+		stat = sp->psc_smbpcr;
-+		au_sync();
-+	} while ((stat & PSC_SMBPCR_DC) != 0);
-+
-+	/* Write out the i2c chip address and specify operation
-+	*/
-+	addr <<= 1;
-+	if (rd)
-+		addr |= 1;
-+
-+	/* Put byte into fifo, start up master.
-+	*/
-+	sp->psc_smbtxrx = addr;
-+	au_sync();
-+	sp->psc_smbpcr = PSC_SMBPCR_MS;
-+	au_sync();
-+	if (wait_ack(adap))
-+		return -EIO;
-+	return 0;
-+}
-+
-+static u32
-+wait_for_rx_byte(struct i2c_algo_au1550_data *adap, u32 *ret_data)
-+{
-+	int	j;
-+	u32	data, stat;
-+	volatile psc_smb_t	*sp;
-+
-+	if (wait_xfer_done(adap))
-+		return -EIO;
-+
-+	sp = (volatile psc_smb_t *)(adap->psc_base);
-+
-+	j =  adap->xfer_timeout * 100;
-+	do {
-+		j--;
-+		if (j <= 0)
-+			return -EIO;
-+
-+		stat = sp->psc_smbstat;
-+		au_sync();
-+		if ((stat & PSC_SMBSTAT_RE) == 0)
-+			j = 0;
-+		else
-+			udelay(1);
-+	} while (j > 0);
-+	data = sp->psc_smbtxrx;
-+	au_sync();
-+	*ret_data = data;
-+
-+	return 0;
-+}
-+
-+static int
-+i2c_read(struct i2c_algo_au1550_data *adap, unsigned char *buf,
-+		    unsigned int len)
-+{
-+	int	i;
-+	u32	data;
-+	volatile psc_smb_t	*sp;
-+
-+	if (len == 0)
-+		return 0;
-+
-+	/* A read is performed by stuffing the transmit fifo with
-+	 * zero bytes for timing, waiting for bytes to appear in the
-+	 * receive fifo, then reading the bytes.
-+	 */
-+
-+	sp = (volatile psc_smb_t *)(adap->psc_base);
-+
-+	i = 0;
-+	while (i < (len-1)) {
-+		sp->psc_smbtxrx = 0;
-+		au_sync();
-+		if (wait_for_rx_byte(adap, &data))
-+			return -EIO;
-+
-+		buf[i] = data;
-+		i++;
-+	}
-+
-+	/* The last byte has to indicate transfer done.
-+	*/
-+	sp->psc_smbtxrx = PSC_SMBTXRX_STP;
-+	au_sync();
-+	if (wait_master_done(adap))
-+		return -EIO;
-+
-+	data = sp->psc_smbtxrx;
-+	au_sync();
-+	buf[i] = data;
-+	return 0;
-+}
-+
-+static int
-+i2c_write(struct i2c_algo_au1550_data *adap, unsigned char *buf,
-+		     unsigned int len)
-+{
-+	int	i;
-+	u32	data;
-+	volatile psc_smb_t	*sp;
-+
-+	if (len == 0)
-+		return 0;
-+
-+	sp = (volatile psc_smb_t *)(adap->psc_base);
-+
-+	i = 0;
-+	while (i < (len-1)) {
-+		data = buf[i];
-+		sp->psc_smbtxrx = data;
-+		au_sync();
-+		if (wait_ack(adap))
-+			return -EIO;
-+		i++;
-+	}
-+
-+	/* The last byte has to indicate transfer done.
-+	*/
-+	data = buf[i];
-+	data |= PSC_SMBTXRX_STP;
-+	sp->psc_smbtxrx = data;
-+	au_sync();
-+	if (wait_master_done(adap))
-+		return -EIO;
-+	return 0;
-+}
-+
-+static int
-+au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
-+{
-+	struct i2c_algo_au1550_data *adap = i2c_adap->algo_data;
-+	struct i2c_msg *p;
-+	int i, err = 0;
-+
-+	for (i = 0; !err && i < num; i++) {
-+		p = &msgs[i];
-+		err = do_address(adap, p->addr, p->flags & I2C_M_RD);
-+		if (err || !p->len)
-+			continue;
-+		if (p->flags & I2C_M_RD)
-+			err = i2c_read(adap, p->buf, p->len);
-+		else
-+			err = i2c_write(adap, p->buf, p->len);
-+	}
-+
-+	/* Return the number of messages processed, or the error code.
-+	*/
-+	if (err == 0)
-+		err = num;
-+	return err;
-+}
-+
-+static u32
-+au1550_func(struct i2c_adapter *adap)
-+{
-+	return I2C_FUNC_I2C;
-+}
-+
-+static struct i2c_algorithm au1550_algo = {
-+	.name		= "Au1550 algorithm",
-+	.id		= I2C_ALGO_AU1550,
-+	.master_xfer	= au1550_xfer,
-+	.functionality	= au1550_func,
-+};
-+
-+/* 
-+ * registering functions to load algorithms at runtime 
-+ * Prior to calling us, the 50MHz clock frequency and routing
-+ * must have been set up for the PSC indicated by the adapter.
-+ */
-+int
-+i2c_au1550_add_bus(struct i2c_adapter *i2c_adap)
-+{
-+	struct i2c_algo_au1550_data *adap = i2c_adap->algo_data;
-+	volatile psc_smb_t	*sp;
-+	u32	stat;
-+
-+	i2c_adap->algo = &au1550_algo;
-+
-+	/* Now, set up the PSC for SMBus PIO mode.
-+	*/
-+	sp = (volatile psc_smb_t *)(adap->psc_base);
-+	sp->psc_ctrl = PSC_CTRL_DISABLE;
-+	au_sync();
-+	sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
-+	sp->psc_smbcfg = 0;
-+	au_sync();
-+	sp->psc_ctrl = PSC_CTRL_ENABLE;
-+	au_sync();
-+	do {
-+		stat = sp->psc_smbstat;
-+		au_sync();
-+	} while ((stat & PSC_SMBSTAT_SR) == 0);
-+
-+	sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
-+				PSC_SMBCFG_DD_DISABLE);
-+
-+	/* Divide by 8 to get a 6.25 MHz clock.  The later protocol
-+	 * timings are based on this clock.
-+	 */
-+	sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV2);
-+	sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
-+	au_sync();
-+
-+	/* Set the protocol timer values.  See Table 71 in the
-+	 * Au1550 Data Book for standard timing values.
-+	 */
-+	sp->psc_smbtmr = PSC_SMBTMR_SET_TH(2) | PSC_SMBTMR_SET_PS(15) | \
-+		PSC_SMBTMR_SET_PU(11) | PSC_SMBTMR_SET_SH(11) | \
-+		PSC_SMBTMR_SET_SU(11) | PSC_SMBTMR_SET_CL(15) | \
-+		PSC_SMBTMR_SET_CH(11);
-+	au_sync();
-+
-+	sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE;
-+	do {
-+		stat = sp->psc_smbstat;
-+		au_sync();
-+	} while ((stat & PSC_SMBSTAT_DR) == 0);
-+
-+	return i2c_add_adapter(i2c_adap);
-+}
-+
-+
-+int
-+i2c_au1550_del_bus(struct i2c_adapter *adap)
-+{
-+	return i2c_del_adapter(adap);
-+}
-+
-+EXPORT_SYMBOL(i2c_au1550_add_bus);
-+EXPORT_SYMBOL(i2c_au1550_del_bus);
-+
-+MODULE_AUTHOR("Dan Malek <dan@embeddededge.com>");
-+MODULE_DESCRIPTION("SMBus Au1550 algorithm");
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.32-rc1/drivers/i2c/i2c-au1550.c linux-2.4.32-rc1.mips/drivers/i2c/i2c-au1550.c
---- linux-2.4.32-rc1/drivers/i2c/i2c-au1550.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/i2c/i2c-au1550.c	2005-02-11 20:49:04.000000000 +0100
-@@ -0,0 +1,154 @@
-+/*
-+ * i2c-au1550.c: SMBus (i2c) adapter for Alchemy PSC interface
-+ * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
-+ *
-+ * This is just a skeleton adapter to use with the Au1550 PSC
-+ * algorithm.  It was developed for the Pb1550, but will work with
-+ * any Au1550 board that has a similar PSC configuration.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ * 
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+
-+#include <asm/au1000.h>
-+#include <asm/au1xxx_psc.h>
-+#if defined( CONFIG_MIPS_PB1550 )
-+	#include <asm/pb1550.h>
-+#endif
-+#if defined( CONFIG_MIPS_PB1200 )
-+	#include <asm/pb1200.h>
-+#endif
-+#if defined( CONFIG_MIPS_DB1200 )
-+	#include <asm/db1200.h>
-+#endif
-+#if defined( CONFIG_MIPS_FICMMP )
-+	#include <asm/ficmmp.h>
-+#endif
-+
-+#include <linux/i2c.h>
-+#include <linux/i2c-algo-au1550.h>
-+
-+
-+
-+static int
-+pb1550_reg(struct i2c_client *client)
-+{
-+	return 0;
-+}
-+
-+static int
-+pb1550_unreg(struct i2c_client *client)
-+{
-+	return 0;
-+}
-+
-+static void
-+pb1550_inc_use(struct i2c_adapter *adap)
-+{
-+#ifdef MODULE
-+	MOD_INC_USE_COUNT;
-+#endif
-+}
-+
-+static void
-+pb1550_dec_use(struct i2c_adapter *adap)
-+{
-+#ifdef MODULE
-+	MOD_DEC_USE_COUNT;
-+#endif
-+}
-+
-+static struct i2c_algo_au1550_data pb1550_i2c_info = {
-+	SMBUS_PSC_BASE, 200, 200
-+};
-+
-+static struct i2c_adapter pb1550_board_adapter = {
-+	name:              "pb1550 adapter",
-+	id:                I2C_HW_AU1550_PSC,
-+	algo:              NULL,
-+	algo_data:         &pb1550_i2c_info,
-+	inc_use:           pb1550_inc_use,
-+	dec_use:           pb1550_dec_use,
-+	client_register:   pb1550_reg,
-+	client_unregister: pb1550_unreg,
-+	client_count:      0,
-+};
-+
-+int __init
-+i2c_pb1550_init(void)
-+{
-+	/* This is where we would set up a 50MHz clock source
-+	 * and routing.  On the Pb1550, the SMBus is PSC2, which
-+	 * uses a shared clock with USB.  This has been already
-+	 * configured by Yamon as a 48MHz clock, close enough
-+	 * for our work.
-+	 */
-+        if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0)
-+                return -ENODEV;
-+
-+	return 0;
-+}
-+
-+/* BIG hack to support the control interface on the Wolfson WM8731
-+ * audio codec on the Pb1550 board.  We get an address and two data
-+ * bytes to write, create an i2c message, and send it across the
-+ * i2c transfer function.  We do this here because we have access to
-+ * the i2c adapter structure.
-+ */
-+static struct i2c_msg wm_i2c_msg;  /* We don't want this stuff on the stack */
-+static	u8 i2cbuf[2];
-+
-+int
-+pb1550_wm_codec_write(u8 addr, u8 reg, u8 val)
-+{
-+	wm_i2c_msg.addr = addr;
-+	wm_i2c_msg.flags = 0;
-+	wm_i2c_msg.buf = i2cbuf;
-+	wm_i2c_msg.len = 2;
-+	i2cbuf[0] = reg;
-+	i2cbuf[1] = val;
-+
-+	return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1);
-+}
-+
-+/* the next function is needed by DVB driver. */
-+int pb1550_i2c_xfer(struct i2c_msg msgs[], int num)
-+{
-+    return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, msgs, num);
-+}
-+
-+EXPORT_SYMBOL(pb1550_wm_codec_write);
-+EXPORT_SYMBOL(pb1550_i2c_xfer);
-+
-+MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC.");
-+MODULE_DESCRIPTION("SMBus adapter Alchemy pb1550");
-+MODULE_LICENSE("GPL");
-+
-+int
-+init_module(void)
-+{
-+	return i2c_pb1550_init();
-+}
-+
-+void
-+cleanup_module(void)
-+{
-+	i2c_au1550_del_bus(&pb1550_board_adapter);
-+}
-diff -Nur linux-2.4.32-rc1/drivers/i2c/i2c-core.c linux-2.4.32-rc1.mips/drivers/i2c/i2c-core.c
---- linux-2.4.32-rc1/drivers/i2c/i2c-core.c	2005-06-01 02:56:56.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/i2c/i2c-core.c	2005-05-23 14:12:30.000000000 +0200
-@@ -1280,6 +1280,9 @@
- #ifdef CONFIG_I2C_MAX1617
- 	extern int i2c_max1617_init(void);
- #endif
-+#ifdef CONFIG_I2C_ALGO_AU1550
-+	extern int i2c_pb1550_init(void);
-+#endif
- 
- #ifdef CONFIG_I2C_PROC
- 	extern int sensors_init(void);
-@@ -1335,6 +1338,10 @@
- 	i2c_max1617_init();
- #endif
- 
-+#ifdef CONFIG_I2C_ALGO_AU1550
-+	i2c_pb1550_init();
-+#endif
-+
- 	/* -------------- proc interface ---- */
- #ifdef CONFIG_I2C_PROC
- 	sensors_init();
-diff -Nur linux-2.4.32-rc1/drivers/i2c/Makefile linux-2.4.32-rc1.mips/drivers/i2c/Makefile
---- linux-2.4.32-rc1/drivers/i2c/Makefile	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/i2c/Makefile	2005-02-11 20:49:04.000000000 +0100
-@@ -6,7 +6,7 @@
- 
- export-objs	:= i2c-core.o i2c-algo-bit.o i2c-algo-pcf.o \
- 		   i2c-algo-ite.o i2c-algo-sibyte.o i2c-algo-sgi.o \
--		   i2c-proc.o
-+		   i2c-algo-au1550.o i2c-proc.o i2c-au1550.o
- 
- obj-$(CONFIG_I2C)		+= i2c-core.o
- obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
-@@ -25,6 +25,7 @@
- obj-$(CONFIG_I2C_ALGO_SIBYTE)	+= i2c-algo-sibyte.o i2c-sibyte.o
- obj-$(CONFIG_I2C_MAX1617)	+= i2c-max1617.o
- obj-$(CONFIG_I2C_ALGO_SGI)	+= i2c-algo-sgi.o
-+obj-$(CONFIG_I2C_ALGO_AU1550)	+= i2c-algo-au1550.o i2c-au1550.o
- 
- # This is needed for automatic patch generation: sensors code starts here
- # This is needed for automatic patch generation: sensors code ends here
-diff -Nur linux-2.4.32-rc1/drivers/media/video/indycam.c linux-2.4.32-rc1.mips/drivers/media/video/indycam.c
---- linux-2.4.32-rc1/drivers/media/video/indycam.c	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/media/video/indycam.c	2004-12-09 21:32:05.000000000 +0100
-@@ -50,13 +50,14 @@
- 		0x80,			/* INDYCAM_GAMMA */
- 	};
- 
--	int err = 0;
- 	struct indycam *camera;
- 	struct i2c_client *client;
-+	int err = 0;
- 
- 	client = kmalloc(sizeof(*client), GFP_KERNEL);
--	if (!client) 
-+	if (!client)
- 		return -ENOMEM;
-+
- 	camera = kmalloc(sizeof(*camera), GFP_KERNEL);
- 	if (!camera) {
- 		err = -ENOMEM;
-@@ -67,7 +68,7 @@
- 	client->adapter = adap;
- 	client->addr = addr;
- 	client->driver = &i2c_driver_indycam;
--	strcpy(client->name, "IndyCam client");			
-+	strcpy(client->name, "IndyCam client");
- 	camera->client = client;
- 
- 	err = i2c_attach_client(client);
-@@ -75,18 +76,18 @@
- 		goto out_free_camera;
- 
- 	camera->version = i2c_smbus_read_byte_data(client, INDYCAM_VERSION);
--	if (camera->version != CAMERA_VERSION_INDY &&
--	    camera->version != CAMERA_VERSION_MOOSE) {
-+	if ((camera->version != CAMERA_VERSION_INDY) &&
-+	    (camera->version != CAMERA_VERSION_MOOSE)) {
- 		err = -ENODEV;
- 		goto out_detach_client;
- 	}
--	printk(KERN_INFO "Indycam v%d.%d detected.\n",
-+	printk(KERN_INFO "IndyCam v%d.%d detected.\n",
- 	       INDYCAM_VERSION_MAJOR(camera->version),
- 	       INDYCAM_VERSION_MINOR(camera->version));
- 
- 	err = i2c_master_send(client, initseq, sizeof(initseq));
- 	if (err)
--		printk(KERN_INFO "IndyCam initalization failed\n");
-+		printk(KERN_ERR "IndyCam initalization failed.\n");
- 
- 	MOD_INC_USE_COUNT;
- 	return 0;
-diff -Nur linux-2.4.32-rc1/drivers/media/video/vino.c linux-2.4.32-rc1.mips/drivers/media/video/vino.c
---- linux-2.4.32-rc1/drivers/media/video/vino.c	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/media/video/vino.c	2004-12-10 05:02:54.000000000 +0100
-@@ -5,6 +5,8 @@
-  * License version 2 as published by the Free Software Foundation.
-  *
-  * Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
-+ * Copyright (C) 2004 Mikael Nousiainen <tmnousia@cc.hut.fi>
-+ * 
-  */
- 
- #include <linux/module.h>
-@@ -37,13 +39,23 @@
- #define DEBUG(x...)
- #endif
- 
-+/* Channels (who could have guessed) */
-+#define VINO_CHAN_NONE		0
-+#define VINO_CHAN_A		1
-+#define VINO_CHAN_B		2
-+
- /* VINO video size */
- #define VINO_PAL_WIDTH		768
- #define VINO_PAL_HEIGHT		576
- #define VINO_NTSC_WIDTH		646
- #define VINO_NTSC_HEIGHT	486
- 
--/* set this to some sensible values. note: VINO_MIN_WIDTH has to be 8*x */
-+/* Minimum value for Y-clipping (for smaller values the images
-+ * will be corrupted) */
-+#define VINO_MIN_Y_CLIPPING	2
-+ 
-+/* Set these to some sensible values.
-+ * Note: the picture width has to be divisible by 8 */
- #define VINO_MIN_WIDTH		32
- #define VINO_MIN_HEIGHT		32
- 
-@@ -64,9 +76,7 @@
- 
- struct vino_device {
- 	struct video_device vdev;
--#define VINO_CHAN_A	1
--#define VINO_CHAN_B	2
--	int chan;
-+	int chan;	/* VINO_CHAN_NONE, VINO_CHAN_A or VINO_CHAN_B */
- 	int alpha;
- 	/* clipping... */
- 	unsigned int left, right, top, bottom;
-@@ -106,7 +116,7 @@
- 
- struct vino_client {
- 	struct i2c_client *driver;
--	int owner;
-+	int owner;	/* VINO_CHAN_NONE, VINO_CHAN_A or VINO_CHAN_B */
- };
- 
- struct vino_video {
-@@ -362,6 +372,7 @@
- static int dma_setup(struct vino_device *v)
- {
- 	u32 ctrl, intr;
-+	int ofs;
- 	struct sgi_vino_channel *ch;
- 
- 	ch = (v->chan == VINO_CHAN_A) ? &vino->a : &vino->b;
-@@ -377,14 +388,24 @@
- 	ch->line_size = v->line_size - 8;
- 	/* set the alpha register */
- 	ch->alpha = v->alpha;
--	/* set cliping registers */
--	ch->clip_start = VINO_CLIP_ODD(v->top) | VINO_CLIP_EVEN(v->top+1) |
-+	/* Set the clipping registers, this is the constant source of fun :)
-+	 * Y clipping start has to be >= 2 and end has to be start + height/2
-+	 * The values of top and bottom are even so dividing is not a problem
-+	 *
-+	 * The docs say that clipping values for the even field should be
-+	 * odd_end + something_to_skip_vertical_blanking + some_lines and
-+	 * even_start + height/2, though the image is good this way also
-+	 *
-+	 * TODO: for analog sources (SAA7191), the clipping values are a bit
-+	 * different and that case isn't yet handled
-+	 */
-+	ofs = VINO_MIN_Y_CLIPPING;	/* Should depend on input source */
-+	ch->clip_start = VINO_CLIP_ODD(ofs + v->top / 2) |
-+			 VINO_CLIP_EVEN(ofs + v->top / 2 + 1) |
- 			 VINO_CLIP_X(v->left);
--	ch->clip_end = VINO_CLIP_ODD(v->bottom) | VINO_CLIP_EVEN(v->bottom+1) |
-+	ch->clip_end = VINO_CLIP_ODD(ofs + v->bottom / 2 - 1) |
-+		       VINO_CLIP_EVEN(ofs + v->bottom / 2) |
- 		       VINO_CLIP_X(v->right);
--	/* FIXME: end-of-field bug workaround
--		       VINO_CLIP_X(VINO_PAL_WIDTH);
--	 */
- 	/* init the frame rate and norm (full frame rate only for now...) */
- 	ch->frame_rate = VINO_FRAMERT_RT(0x1fff) |
- 			 (get_capture_norm(v) == VIDEO_MODE_PAL ?
-@@ -510,6 +531,7 @@
- static void vino_interrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
- 	u32 intr, ctrl;
-+	int a_eof, b_eof;
- 
- 	spin_lock(&Vino->vino_lock);
- 	ctrl = vino->control;
-@@ -525,12 +547,14 @@
- 		vino->control = ctrl;
- 		clear_eod(&Vino->chB);
- 	}
-+	a_eof = intr & VINO_INTSTAT_A_EOF;
-+	b_eof = intr & VINO_INTSTAT_B_EOF;
- 	vino->intr_status = ~intr;
- 	spin_unlock(&Vino->vino_lock);
--	/* FIXME: For now we are assuming that interrupt means that frame is
--	 * done. That's not true, but we can live with such brokeness for
--	 * a while ;-) */
--	field_done(&Vino->chA);
-+	if (a_eof)
-+		field_done(&Vino->chA);
-+	if (b_eof)
-+		field_done(&Vino->chB);
- }
- 
- static int vino_grab(struct vino_device *v, int frame)
-diff -Nur linux-2.4.32-rc1/drivers/mtd/devices/docprobe.c linux-2.4.32-rc1.mips/drivers/mtd/devices/docprobe.c
---- linux-2.4.32-rc1/drivers/mtd/devices/docprobe.c	2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/mtd/devices/docprobe.c	2003-06-16 01:42:21.000000000 +0200
-@@ -89,10 +89,10 @@
- 	0xe4000000,
- #elif defined(CONFIG_MOMENCO_OCELOT)
- 	0x2f000000,
--        0xff000000,
-+	0xff000000,
- #elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
--        0xff000000,
--##else
-+	0xff000000,
-+#else
- #warning Unknown architecture for DiskOnChip. No default probe locations defined
- #endif
- 	0 };
-diff -Nur linux-2.4.32-rc1/drivers/mtd/devices/ms02-nv.c linux-2.4.32-rc1.mips/drivers/mtd/devices/ms02-nv.c
---- linux-2.4.32-rc1/drivers/mtd/devices/ms02-nv.c	2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/mtd/devices/ms02-nv.c	2004-07-30 12:22:40.000000000 +0200
-@@ -1,10 +1,10 @@
- /*
-- *      Copyright (c) 2001 Maciej W. Rozycki
-+ *	Copyright (c) 2001 Maciej W. Rozycki
-  *
-- *      This program is free software; you can redistribute it and/or
-- *      modify it under the terms of the GNU General Public License
-- *      as published by the Free Software Foundation; either version
-- *      2 of the License, or (at your option) any later version.
-+ *	This program is free software; you can redistribute it and/or
-+ *	modify it under the terms of the GNU General Public License
-+ *	as published by the Free Software Foundation; either version
-+ *	2 of the License, or (at your option) any later version.
-  *
-  *	$Id: ms02-nv.c,v 1.2 2003/01/24 14:05:17 dwmw2 Exp $
-  */
-@@ -29,18 +29,18 @@
- 
- 
- static char version[] __initdata =
--        "ms02-nv.c: v.1.0.0  13 Aug 2001  Maciej W. Rozycki.\n";
-+	"ms02-nv.c: v.1.0.0  13 Aug 2001  Maciej W. Rozycki.\n";
- 
--MODULE_AUTHOR("Maciej W. Rozycki <macro@ds2.pg.gda.pl>");
-+MODULE_AUTHOR("Maciej W. Rozycki <macro@linux-mips.org>");
- MODULE_DESCRIPTION("DEC MS02-NV NVRAM module driver");
- MODULE_LICENSE("GPL");
- 
- 
- /*
-  * Addresses we probe for an MS02-NV at.  Modules may be located
-- * at any 8MB boundary within a 0MB up to 112MB range or at any 32MB
-- * boundary within a 0MB up to 448MB range.  We don't support a module
-- * at 0MB, though.
-+ * at any 8MiB boundary within a 0MiB up to 112MiB range or at any 32MiB
-+ * boundary within a 0MiB up to 448MiB range.  We don't support a module
-+ * at 0MiB, though.
-  */
- static ulong ms02nv_addrs[] __initdata = {
- 	0x07000000, 0x06800000, 0x06000000, 0x05800000, 0x05000000,
-@@ -130,7 +130,7 @@
- 
- 	int ret = -ENODEV;
- 
--	/* The module decodes 8MB of address space. */
-+	/* The module decodes 8MiB of address space. */
- 	mod_res = kmalloc(sizeof(*mod_res), GFP_KERNEL);
- 	if (!mod_res)
- 		return -ENOMEM;
-@@ -233,7 +233,7 @@
- 		goto err_out_csr_res;
- 	}
- 
--	printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %uMB.\n",
-+	printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %uMiB.\n",
- 		mtd->index, ms02nv_name, addr, size >> 20);
- 
- 	mp->next = root_ms02nv_mtd;
-@@ -293,12 +293,12 @@
- 
- 	switch (mips_machtype) {
- 	case MACH_DS5000_200:
--		csr = (volatile u32 *)KN02_CSR_ADDR;
-+		csr = (volatile u32 *)KN02_CSR_BASE;
- 		if (*csr & KN02_CSR_BNK32M)
- 			stride = 2;
- 		break;
- 	case MACH_DS5000_2X0:
--	case MACH_DS5000:
-+	case MACH_DS5900:
- 		csr = (volatile u32 *)KN03_MCR_BASE;
- 		if (*csr & KN03_MCR_BNK32M)
- 			stride = 2;
-diff -Nur linux-2.4.32-rc1/drivers/mtd/devices/ms02-nv.h linux-2.4.32-rc1.mips/drivers/mtd/devices/ms02-nv.h
---- linux-2.4.32-rc1/drivers/mtd/devices/ms02-nv.h	2002-11-29 00:53:13.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/mtd/devices/ms02-nv.h	2004-07-30 12:22:40.000000000 +0200
-@@ -1,32 +1,96 @@
- /*
-- *      Copyright (c) 2001 Maciej W. Rozycki
-+ *	Copyright (c) 2001, 2003  Maciej W. Rozycki
-  *
-- *      This program is free software; you can redistribute it and/or
-- *      modify it under the terms of the GNU General Public License
-- *      as published by the Free Software Foundation; either version
-- *      2 of the License, or (at your option) any later version.
-+ *	DEC MS02-NV (54-20948-01) battery backed-up NVRAM module for
-+ *	DECstation/DECsystem 5000/2x0 and DECsystem 5900 and 5900/260
-+ *	systems.
-+ *
-+ *	This program is free software; you can redistribute it and/or
-+ *	modify it under the terms of the GNU General Public License
-+ *	as published by the Free Software Foundation; either version
-+ *	2 of the License, or (at your option) any later version.
-+ *
-+ *	$Id: ms02-nv.h,v 1.3 2003/08/19 09:25:36 dwmw2 Exp $
-  */
- 
- #include <linux/ioport.h>
- #include <linux/mtd/mtd.h>
- 
-+/*
-+ * Addresses are decoded as follows:
-+ *
-+ * 0x000000 - 0x3fffff	SRAM
-+ * 0x400000 - 0x7fffff	CSR
-+ *
-+ * Within the SRAM area the following ranges are forced by the system
-+ * firmware:
-+ *
-+ * 0x000000 - 0x0003ff	diagnostic area, destroyed upon a reboot
-+ * 0x000400 - ENDofRAM	storage area, available to operating systems
-+ *
-+ * but we can't really use the available area right from 0x000400 as
-+ * the first word is used by the firmware as a status flag passed
-+ * from an operating system.  If anything but the valid data magic
-+ * ID value is found, the firmware considers the SRAM clean, i.e.
-+ * containing no valid data, and disables the battery resulting in
-+ * data being erased as soon as power is switched off.  So the choice
-+ * for the start address of the user-available is 0x001000 which is
-+ * nicely page aligned.  The area between 0x000404 and 0x000fff may
-+ * be used by the driver for own needs.
-+ *
-+ * The diagnostic area defines two status words to be read by an
-+ * operating system, a magic ID to distinguish a MS02-NV board from
-+ * anything else and a status information providing results of tests
-+ * as well as the size of SRAM available, which can be 1MiB or 2MiB
-+ * (that's what the firmware handles; no idea if 2MiB modules ever
-+ * existed).
-+ *
-+ * The firmware only handles the MS02-NV board if installed in the
-+ * last (15th) slot, so for any other location the status information
-+ * stored in the SRAM cannot be relied upon.  But from the hardware
-+ * point of view there is no problem using up to 14 such boards in a
-+ * system -- only the 1st slot needs to be filled with a DRAM module.
-+ * The MS02-NV board is ECC-protected, like other MS02 memory boards.
-+ *
-+ * The state of the battery as provided by the CSR is reflected on
-+ * the two onboard LEDs.  When facing the battery side of the board,
-+ * with the LEDs at the top left and the battery at the bottom right
-+ * (i.e. looking from the back side of the system box), their meaning
-+ * is as follows (the system has to be powered on):
-+ *
-+ * left LED		battery disable status: lit = enabled
-+ * right LED		battery condition status: lit = OK
-+ */
-+
- /* MS02-NV iomem register offsets. */
- #define MS02NV_CSR		0x400000	/* control & status register */
- 
-+/* MS02-NV CSR status bits. */
-+#define MS02NV_CSR_BATT_OK	0x01		/* battery OK */
-+#define MS02NV_CSR_BATT_OFF	0x02		/* battery disabled */
-+
-+
- /* MS02-NV memory offsets. */
- #define MS02NV_DIAG		0x0003f8	/* diagnostic status */
- #define MS02NV_MAGIC		0x0003fc	/* MS02-NV magic ID */
--#define MS02NV_RAM		0x000400	/* general-purpose RAM start */
-+#define MS02NV_VALID		0x000400	/* valid data magic ID */
-+#define MS02NV_RAM		0x001000	/* user-exposed RAM start */
- 
--/* MS02-NV diagnostic status constants. */
--#define MS02NV_DIAG_SIZE_MASK	0xf0		/* RAM size mask */
--#define MS02NV_DIAG_SIZE_SHIFT	0x10		/* RAM size shift (left) */
-+/* MS02-NV diagnostic status bits. */
-+#define MS02NV_DIAG_TEST	0x01		/* SRAM test done (?) */
-+#define MS02NV_DIAG_RO		0x02		/* SRAM r/o test done */
-+#define MS02NV_DIAG_RW		0x04		/* SRAM r/w test done */
-+#define MS02NV_DIAG_FAIL	0x08		/* SRAM test failed */
-+#define MS02NV_DIAG_SIZE_MASK	0xf0		/* SRAM size mask */
-+#define MS02NV_DIAG_SIZE_SHIFT	0x10		/* SRAM size shift (left) */
- 
- /* MS02-NV general constants. */
- #define MS02NV_ID		0x03021966	/* MS02-NV magic ID value */
-+#define MS02NV_VALID_ID		0xbd100248	/* valid data magic ID value */
- #define MS02NV_SLOT_SIZE	0x800000	/* size of the address space
- 						   decoded by the module */
- 
-+
- typedef volatile u32 ms02nv_uint;
- 
- struct ms02nv_private {
-diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/Config.in linux-2.4.32-rc1.mips/drivers/mtd/maps/Config.in
---- linux-2.4.32-rc1/drivers/mtd/maps/Config.in	2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/mtd/maps/Config.in	2004-02-26 01:46:35.000000000 +0100
-@@ -51,11 +51,26 @@
-    dep_tristate '  Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
-    dep_tristate '  Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
-    dep_tristate '  Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100
-+   dep_tristate '  Bosporus MTD support' CONFIG_MTD_BOSPORUS $CONFIG_MIPS_BOSPORUS
-+   dep_tristate '  XXS1500 boot flash device' CONFIG_MTD_XXS1500 $CONFIG_MIPS_XXS1500
-+   dep_tristate '  MTX-1 flash device' CONFIG_MTD_MTX1 $CONFIG_MIPS_MTX1
-    if [ "$CONFIG_MTD_PB1500" = "y" -o "$CONFIG_MTD_PB1500" = "m" \
- 	-o "$CONFIG_MTD_PB1100" = "y" -o "$CONFIG_MTD_PB1100" = "m" ]; then
-       bool '  Pb[15]00 boot flash device' CONFIG_MTD_PB1500_BOOT 
-       bool '  Pb[15]00 user flash device (2nd 32MiB bank)' CONFIG_MTD_PB1500_USER
-    fi
-+   tristate '  Db1x00 MTD support' CONFIG_MTD_DB1X00
-+   if [ "$CONFIG_MTD_DB1X00" = "y" -o "$CONFIG_MTD_DB1X00" = "m" ]; then
-+      bool '  Db1x00 boot flash device' CONFIG_MTD_DB1X00_BOOT 
-+      bool '  Db1x00 user flash device (2nd bank)' CONFIG_MTD_DB1X00_USER
-+   fi
-+   tristate '  Pb1550 MTD support' CONFIG_MTD_PB1550
-+   if [ "$CONFIG_MTD_PB1550" = "y" -o "$CONFIG_MTD_PB1550" = "m" ]; then
-+      bool '  Pb1550 Boot Flash' CONFIG_MTD_PB1550_BOOT
-+      bool '  Pb1550 User Parameter Flash' CONFIG_MTD_PB1550_USER
-+   fi
-+   dep_tristate '  Hydrogen 3 MTD support' CONFIG_MTD_HYDROGEN3 $CONFIG_MIPS_HYDROGEN3
-+   dep_tristate '  Mirage MTD support' CONFIG_MTD_MIRAGE $CONFIG_MIPS_MIRAGE
-    dep_tristate '  Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board' CONFIG_MTD_CSTM_MIPS_IXX $CONFIG_MTD_CFI $CONFIG_MTD_JEDEC $CONFIG_MTD_PARTITIONS 
-    if [ "$CONFIG_MTD_CSTM_MIPS_IXX" = "y" -o "$CONFIG_MTD_CSTM_MIPS_IXX" = "m" ]; then
-       hex '    Physical start address of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_START 0x8000000
-diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/db1x00-flash.c linux-2.4.32-rc1.mips/drivers/mtd/maps/db1x00-flash.c
---- linux-2.4.32-rc1/drivers/mtd/maps/db1x00-flash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/mtd/maps/db1x00-flash.c	2005-02-03 07:35:29.000000000 +0100
-@@ -0,0 +1,283 @@
-+/*
-+ * Flash memory access on Alchemy Db1xxx boards
-+ * 
-+ * (C) 2003 Pete Popov <ppopov@pacbell.net>
-+ * 
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/io.h>
-+#include <asm/au1000.h>
-+#include <asm/db1x00.h>
-+
-+#ifdef 	DEBUG_RW
-+#define	DBG(x...)	printk(x)
-+#else
-+#define	DBG(x...)	
-+#endif
-+
-+static unsigned long window_addr;
-+static unsigned long window_size;
-+static unsigned long flash_size;
-+
-+__u8 physmap_read8(struct map_info *map, unsigned long ofs)
-+{
-+	__u8 ret;
-+	ret = __raw_readb(map->map_priv_1 + ofs);
-+	DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+__u16 physmap_read16(struct map_info *map, unsigned long ofs)
-+{
-+	__u16 ret;
-+	ret = __raw_readw(map->map_priv_1 + ofs);
-+	DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+__u32 physmap_read32(struct map_info *map, unsigned long ofs)
-+{
-+	__u32 ret;
-+	ret = __raw_readl(map->map_priv_1 + ofs);
-+	DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-+{
-+	DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to);
-+	memcpy_fromio(to, map->map_priv_1 + from, len);
-+}
-+
-+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr)
-+{
-+	DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writeb(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
-+{
-+	DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writew(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr)
-+{
-+	DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writel(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-+{
-+	DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from);
-+	memcpy_toio(map->map_priv_1 + to, from, len);
-+}
-+
-+static struct map_info db1x00_map = {
-+	name:		"Db1x00 flash",
-+	read8: physmap_read8,
-+	read16: physmap_read16,
-+	read32: physmap_read32,
-+	copy_from: physmap_copy_from,
-+	write8: physmap_write8,
-+	write16: physmap_write16,
-+	write32: physmap_write32,
-+	copy_to: physmap_copy_to,
-+};
-+
-+static unsigned char flash_buswidth = 4;
-+
-+/* 
-+ * The Db1x boards support different flash densities. We setup
-+ * the mtd_partition structures below for default of 64Mbit 
-+ * flash densities, and override the partitions sizes, if
-+ * necessary, after we check the board status register.
-+ */
-+
-+#ifdef DB1X00_BOTH_BANKS
-+/* both banks will be used. Combine the first bank and the first 
-+ * part of the second bank together into a single jffs/jffs2
-+ * partition.
-+ */
-+static struct mtd_partition db1x00_partitions[] = {
-+        {
-+                name: "User FS",
-+                size:   0x1c00000,
-+                offset: 0x0000000
-+        },{
-+                name: "yamon",
-+                size: 0x0100000,
-+		offset:	MTDPART_OFS_APPEND,
-+                mask_flags: MTD_WRITEABLE
-+        },{
-+                name: "raw kernel",
-+		size: (0x300000-0x40000), /* last 256KB is yamon env */
-+		offset:	MTDPART_OFS_APPEND,
-+        }
-+};
-+#elif defined(DB1X00_BOOT_ONLY)
-+static struct mtd_partition db1x00_partitions[] = {
-+        {
-+                name: "User FS",
-+                size:   0x00c00000,
-+                offset: 0x0000000
-+        },{
-+                name: "yamon",
-+                size: 0x0100000,
-+		offset:	MTDPART_OFS_APPEND,
-+                mask_flags: MTD_WRITEABLE
-+        },{
-+                name: "raw kernel",
-+		size: (0x300000-0x40000), /* last 256KB is yamon env */
-+		offset:	MTDPART_OFS_APPEND,
-+        }
-+};
-+#elif defined(DB1X00_USER_ONLY)
-+static struct mtd_partition db1x00_partitions[] = {
-+        {
-+                name: "User FS",
-+                size:   0x0e00000,
-+                offset: 0x0000000
-+        },{
-+                name: "raw kernel",
-+		size: MTDPART_SIZ_FULL,
-+		offset:	MTDPART_OFS_APPEND,
-+        }
-+};
-+#else
-+#error MTD_DB1X00 define combo error /* should never happen */
-+#endif
-+
-+
-+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
-+
-+static struct mtd_partition *parsed_parts;
-+static struct mtd_info *mymtd;
-+
-+/*
-+ * Probe the flash density and setup window address and size
-+ * based on user CONFIG options. There are times when we don't
-+ * want the MTD driver to be probing the boot or user flash,
-+ * so having the option to enable only one bank is important.
-+ */
-+int setup_flash_params()
-+{
-+	switch ((bcsr->status >> 14) & 0x3) {
-+		case 0: /* 64Mbit devices */
-+			flash_size = 0x800000; /* 8MB per part */
-+#if defined(DB1X00_BOTH_BANKS)
-+			window_addr = 0x1E000000;
-+			window_size = 0x2000000; 
-+#elif defined(DB1X00_BOOT_ONLY)
-+			window_addr = 0x1F000000;
-+			window_size = 0x1000000; 
-+#else /* USER ONLY */
-+			window_addr = 0x1E000000;
-+			window_size = 0x1000000; 
-+#endif
-+			break;
-+		case 1:
-+			/* 128 Mbit devices */
-+			flash_size = 0x1000000; /* 16MB per part */
-+#if defined(DB1X00_BOTH_BANKS)
-+			window_addr = 0x1C000000;
-+			window_size = 0x4000000;
-+			/* USERFS from 0x1C00 0000 to 0x1FC0 0000 */
-+			db1x00_partitions[0].size = 0x3C00000;
-+#elif defined(DB1X00_BOOT_ONLY)
-+			window_addr = 0x1E000000;
-+			window_size = 0x2000000;
-+			/* USERFS from 0x1E00 0000 to 0x1FC0 0000 */
-+			db1x00_partitions[0].size = 0x1C00000;
-+#else /* USER ONLY */
-+			window_addr = 0x1C000000;
-+			window_size = 0x2000000;
-+			/* USERFS from 0x1C00 0000 to 0x1DE00000 */
-+			db1x00_partitions[0].size = 0x1DE0000;
-+#endif
-+			break;
-+		case 2:
-+			/* 256 Mbit devices */
-+			flash_size = 0x4000000; /* 64MB per part */
-+#if defined(DB1X00_BOTH_BANKS)
-+			return 1;
-+#elif defined(DB1X00_BOOT_ONLY)
-+			/* Boot ROM flash bank only; no user bank */
-+			window_addr = 0x1C000000;
-+			window_size = 0x4000000;
-+			/* USERFS from 0x1C00 0000 to 0x1FC00000 */
-+			db1x00_partitions[0].size = 0x3C00000;
-+#else /* USER ONLY */
-+			return 1;
-+#endif
-+			break;
-+		default:
-+			return 1;
-+	}
-+	return 0;
-+}
-+
-+int __init db1x00_mtd_init(void)
-+{
-+	struct mtd_partition *parts;
-+	int nb_parts = 0;
-+	char *part_type;
-+	
-+	/* Default flash buswidth */
-+	db1x00_map.buswidth = flash_buswidth;
-+
-+	if (setup_flash_params()) 
-+		return -ENXIO;
-+
-+	/*
-+	 * Static partition definition selection
-+	 */
-+	part_type = "static";
-+	parts = db1x00_partitions;
-+	nb_parts = NB_OF(db1x00_partitions);
-+	db1x00_map.size = window_size;
-+
-+	/*
-+	 * Now let's probe for the actual flash.  Do it here since
-+	 * specific machine settings might have been set above.
-+	 */
-+	printk(KERN_NOTICE "Db1xxx flash: probing %d-bit flash bus\n", 
-+			db1x00_map.buswidth*8);
-+	db1x00_map.map_priv_1 = 
-+		(unsigned long)ioremap(window_addr, window_size);
-+	mymtd = do_map_probe("cfi_probe", &db1x00_map);
-+	if (!mymtd) return -ENXIO;
-+	mymtd->module = THIS_MODULE;
-+
-+	add_mtd_partitions(mymtd, parts, nb_parts);
-+	return 0;
-+}
-+
-+static void __exit db1x00_mtd_cleanup(void)
-+{
-+	if (mymtd) {
-+		del_mtd_partitions(mymtd);
-+		map_destroy(mymtd);
-+		if (parsed_parts)
-+			kfree(parsed_parts);
-+	}
-+}
-+
-+module_init(db1x00_mtd_init);
-+module_exit(db1x00_mtd_cleanup);
-+
-+MODULE_AUTHOR("Pete Popov");
-+MODULE_DESCRIPTION("Db1x00 mtd map driver");
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/hydrogen3-flash.c linux-2.4.32-rc1.mips/drivers/mtd/maps/hydrogen3-flash.c
---- linux-2.4.32-rc1/drivers/mtd/maps/hydrogen3-flash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/mtd/maps/hydrogen3-flash.c	2004-01-10 23:40:18.000000000 +0100
-@@ -0,0 +1,189 @@
-+/*
-+ * Flash memory access on Alchemy HydrogenIII boards
-+ * 
-+ * (C) 2003 Pete Popov <ppopov@pacbell.net>
-+ * 
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/io.h>
-+#include <asm/au1000.h>
-+
-+#ifdef 	DEBUG_RW
-+#define	DBG(x...)	printk(x)
-+#else
-+#define	DBG(x...)	
-+#endif
-+
-+#define WINDOW_ADDR 0x1E000000
-+#define WINDOW_SIZE 0x02000000
-+
-+
-+__u8 physmap_read8(struct map_info *map, unsigned long ofs)
-+{
-+	__u8 ret;
-+	ret = __raw_readb(map->map_priv_1 + ofs);
-+	DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+__u16 physmap_read16(struct map_info *map, unsigned long ofs)
-+{
-+	__u16 ret;
-+	ret = __raw_readw(map->map_priv_1 + ofs);
-+	DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+__u32 physmap_read32(struct map_info *map, unsigned long ofs)
-+{
-+	__u32 ret;
-+	ret = __raw_readl(map->map_priv_1 + ofs);
-+	DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-+{
-+	DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to);
-+	memcpy_fromio(to, map->map_priv_1 + from, len);
-+}
-+
-+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr)
-+{
-+	DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writeb(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
-+{
-+	DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writew(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr)
-+{
-+	DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writel(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-+{
-+	DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from);
-+	memcpy_toio(map->map_priv_1 + to, from, len);
-+}
-+
-+static struct map_info hydrogen3_map = {
-+	name:		"HydrogenIII flash",
-+	read8: physmap_read8,
-+	read16: physmap_read16,
-+	read32: physmap_read32,
-+	copy_from: physmap_copy_from,
-+	write8: physmap_write8,
-+	write16: physmap_write16,
-+	write32: physmap_write32,
-+	copy_to: physmap_copy_to,
-+};
-+
-+static unsigned char flash_buswidth = 4;
-+
-+/* MTDPART_OFS_APPEND is vastly preferred to any attempt at statically lining
-+ * up the offsets. */
-+static struct mtd_partition hydrogen3_partitions[] = {
-+        {
-+                name: "User FS",
-+                size:   0x1c00000,
-+                offset: 0x0000000
-+        },{
-+                name: "yamon",
-+                size: 0x0100000,
-+                offset: MTDPART_OFS_APPEND,
-+                mask_flags: MTD_WRITEABLE
-+        },{
-+                name: "raw kernel",
-+                size: 0x02c0000,
-+                offset: MTDPART_OFS_APPEND
-+        }
-+};
-+
-+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
-+
-+static struct mtd_partition *parsed_parts;
-+static struct mtd_info *mymtd;
-+
-+int __init hydrogen3_mtd_init(void)
-+{
-+	struct mtd_partition *parts;
-+	int nb_parts = 0;
-+	char *part_type;
-+	
-+	/* Default flash buswidth */
-+	hydrogen3_map.buswidth = flash_buswidth;
-+
-+	/*
-+	 * Static partition definition selection
-+	 */
-+	part_type = "static";
-+	parts = hydrogen3_partitions;
-+	nb_parts = NB_OF(hydrogen3_partitions);
-+	hydrogen3_map.size = WINDOW_SIZE;
-+
-+	/*
-+	 * Now let's probe for the actual flash.  Do it here since
-+	 * specific machine settings might have been set above.
-+	 */
-+	printk(KERN_NOTICE "HydrogenIII flash: probing %d-bit flash bus\n", 
-+			hydrogen3_map.buswidth*8);
-+	hydrogen3_map.map_priv_1 = 
-+		(unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE);
-+	mymtd = do_map_probe("cfi_probe", &hydrogen3_map);
-+	if (!mymtd) return -ENXIO;
-+	mymtd->module = THIS_MODULE;
-+
-+	add_mtd_partitions(mymtd, parts, nb_parts);
-+	return 0;
-+}
-+
-+static void __exit hydrogen3_mtd_cleanup(void)
-+{
-+	if (mymtd) {
-+		del_mtd_partitions(mymtd);
-+		map_destroy(mymtd);
-+		if (parsed_parts)
-+			kfree(parsed_parts);
-+	}
-+}
-+
-+/*#ifndef MODULE
-+
-+static int __init _bootflashonly(char *str)
-+{
-+  bootflashonly = simple_strtol(str, NULL, 0);
-+  return 1;
-+}
-+
-+
-+__setup("bootflashonly=", _bootflashonly);
-+
-+#endif*/
-+
-+
-+module_init(hydrogen3_mtd_init);
-+module_exit(hydrogen3_mtd_cleanup);
-+
-+MODULE_PARM(bootflashonly, "i");
-+MODULE_PARM_DESC(bootflashonly, "1=use \"boot flash only\"");
-+MODULE_AUTHOR("Pete Popov");
-+MODULE_DESCRIPTION("HydrogenIII mtd map driver");
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/lasat.c linux-2.4.32-rc1.mips/drivers/mtd/maps/lasat.c
---- linux-2.4.32-rc1/drivers/mtd/maps/lasat.c	2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/mtd/maps/lasat.c	2003-08-18 04:59:02.000000000 +0200
-@@ -1,15 +1,6 @@
- /*
-  * Flash device on lasat 100 and 200 boards
-  *
-- * Presumably (C) 2002 Brian Murphy <brian@murphy.dk> or whoever he
-- * works for.
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License version
-- * 2 as published by the Free Software Foundation.
-- *
-- * $Id: lasat.c,v 1.1 2003/01/24 14:26:38 dwmw2 Exp $
-- *
-  */
- 
- #include <linux/module.h>
-@@ -21,7 +12,6 @@
- #include <linux/mtd/partitions.h>
- #include <linux/config.h>
- #include <asm/lasat/lasat.h>
--#include <asm/lasat/lasat_mtd.h>
- 
- static struct mtd_info *mymtd;
- 
-@@ -69,30 +59,33 @@
- }
- 
- static struct map_info sp_map = {
--	.name = "SP flash",
--	.buswidth = 4,
--	.read8 = sp_read8,
--	.read16 = sp_read16,
--	.read32 = sp_read32,
--	.copy_from = sp_copy_from,
--	.write8 = sp_write8,
--	.write16 = sp_write16,
--	.write32 = sp_write32,
--	.copy_to = sp_copy_to
-+	name: "SP flash",
-+	buswidth: 4,
-+	read8: sp_read8,
-+	read16: sp_read16,
-+	read32: sp_read32,
-+	copy_from: sp_copy_from,
-+	write8: sp_write8,
-+	write16: sp_write16,
-+	write32: sp_write32,
-+	copy_to: sp_copy_to
- };
- 
- static struct mtd_partition partition_info[LASAT_MTD_LAST];
--static char *lasat_mtd_partnames[] = {"Bootloader", "Service", "Normal", "Filesystem", "Config"};
-+static char *lasat_mtd_partnames[] = {"Bootloader", "Service", "Normal", "Config", "Filesystem"};
- 
- static int __init init_sp(void)
- {
- 	int i;
-+	int nparts = 0;
- 	/* this does not play well with the old flash code which 
- 	 * protects and uprotects the flash when necessary */
-        	printk(KERN_NOTICE "Unprotecting flash\n");
- 	*lasat_misc->flash_wp_reg |= 1 << lasat_misc->flash_wp_bit;
- 
--	sp_map.map_priv_1 = lasat_flash_partition_start(LASAT_MTD_BOOTLOADER);
-+	sp_map.map_priv_1 = ioremap_nocache(
-+		lasat_flash_partition_start(LASAT_MTD_BOOTLOADER),
-+		lasat_board_info.li_flash_size);
- 	sp_map.size = lasat_board_info.li_flash_size;
- 
-        	printk(KERN_NOTICE "sp flash device: %lx at %lx\n", 
-@@ -109,12 +102,15 @@
- 
- 		for (i=0; i < LASAT_MTD_LAST; i++) {
- 			size = lasat_flash_partition_size(i);
--			partition_info[i].size = size;
--			partition_info[i].offset = offset;
--			offset += size;
-+			if (size != 0) {
-+				nparts++;
-+				partition_info[i].size = size;
-+				partition_info[i].offset = offset;
-+				offset += size;
-+			}
- 		}
- 
--		add_mtd_partitions( mymtd, partition_info, LASAT_MTD_LAST );
-+		add_mtd_partitions( mymtd, partition_info, nparts );
- 		return 0;
- 	}
- 
-@@ -124,11 +120,11 @@
- static void __exit cleanup_sp(void)
- {
- 	if (mymtd) {
--		del_mtd_partitions(mymtd);
--		map_destroy(mymtd);
-+	  del_mtd_partitions(mymtd);
-+	  map_destroy(mymtd);
- 	}
- 	if (sp_map.map_priv_1) {
--		sp_map.map_priv_1 = 0;
-+	  sp_map.map_priv_1 = 0;
- 	}
- }
- 
-diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/Makefile linux-2.4.32-rc1.mips/drivers/mtd/maps/Makefile
---- linux-2.4.32-rc1/drivers/mtd/maps/Makefile	2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/mtd/maps/Makefile	2004-02-26 01:46:35.000000000 +0100
-@@ -52,7 +52,13 @@
- obj-$(CONFIG_MTD_PB1000)	+= pb1xxx-flash.o
- obj-$(CONFIG_MTD_PB1100)	+= pb1xxx-flash.o
- obj-$(CONFIG_MTD_PB1500)	+= pb1xxx-flash.o
-+obj-$(CONFIG_MTD_XXS1500)       += xxs1500.o
-+obj-$(CONFIG_MTD_MTX1)		+= mtx-1.o
- obj-$(CONFIG_MTD_LASAT)		+= lasat.o
-+obj-$(CONFIG_MTD_DB1X00)        += db1x00-flash.o
-+obj-$(CONFIG_MTD_PB1550)        += pb1550-flash.o
-+obj-$(CONFIG_MTD_HYDROGEN3)     += hydrogen3-flash.o
-+obj-$(CONFIG_MTD_BOSPORUS)	+= pb1xxx-flash.o
- obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
- obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
-@@ -61,5 +67,6 @@
- obj-$(CONFIG_MTD_UCLINUX)	+= uclinux.o
- obj-$(CONFIG_MTD_NETtel)	+= nettel.o
- obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
-+obj-$(CONFIG_MTD_MIRAGE)        += mirage-flash.o
- 
- include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/mirage-flash.c linux-2.4.32-rc1.mips/drivers/mtd/maps/mirage-flash.c
---- linux-2.4.32-rc1/drivers/mtd/maps/mirage-flash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/mtd/maps/mirage-flash.c	2003-12-22 04:37:22.000000000 +0100
-@@ -0,0 +1,194 @@
-+/*
-+ * Flash memory access on AMD Mirage board.
-+ * 
-+ * (C) 2003 Embedded Edge
-+ * based on mirage-flash.c:
-+ * (C) 2003 Pete Popov <ppopov@pacbell.net>
-+ * 
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/io.h>
-+#include <asm/au1000.h>
-+//#include <asm/mirage.h>
-+
-+#ifdef 	DEBUG_RW
-+#define	DBG(x...)	printk(x)
-+#else
-+#define	DBG(x...)	
-+#endif
-+
-+static unsigned long window_addr;
-+static unsigned long window_size;
-+static unsigned long flash_size;
-+
-+__u8 physmap_read8(struct map_info *map, unsigned long ofs)
-+{
-+	__u8 ret;
-+	ret = __raw_readb(map->map_priv_1 + ofs);
-+	DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+__u16 physmap_read16(struct map_info *map, unsigned long ofs)
-+{
-+	__u16 ret;
-+	ret = __raw_readw(map->map_priv_1 + ofs);
-+	DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+__u32 physmap_read32(struct map_info *map, unsigned long ofs)
-+{
-+	__u32 ret;
-+	ret = __raw_readl(map->map_priv_1 + ofs);
-+	DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-+{
-+	DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to);
-+	memcpy_fromio(to, map->map_priv_1 + from, len);
-+}
-+
-+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr)
-+{
-+	DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writeb(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
-+{
-+	DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writew(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr)
-+{
-+	DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writel(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-+{
-+	DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from);
-+	memcpy_toio(map->map_priv_1 + to, from, len);
-+}
-+
-+static struct map_info mirage_map = {
-+	name:		"Mirage flash",
-+	read8: physmap_read8,
-+	read16: physmap_read16,
-+	read32: physmap_read32,
-+	copy_from: physmap_copy_from,
-+	write8: physmap_write8,
-+	write16: physmap_write16,
-+	write32: physmap_write32,
-+	copy_to: physmap_copy_to,
-+};
-+
-+static unsigned char flash_buswidth = 4;
-+
-+static struct mtd_partition mirage_partitions[] = {
-+        {
-+                name: "User FS",
-+                size:   0x1c00000,
-+                offset: 0x0000000
-+        },{
-+                name: "yamon",
-+                size: 0x0100000,
-+		offset:	MTDPART_OFS_APPEND,
-+                mask_flags: MTD_WRITEABLE
-+        },{
-+                name: "raw kernel",
-+		size: (0x300000-0x40000), /* last 256KB is yamon env */
-+		offset:	MTDPART_OFS_APPEND,
-+        }
-+};
-+
-+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
-+
-+static struct mtd_partition *parsed_parts;
-+static struct mtd_info *mymtd;
-+
-+/*
-+ * Probe the flash density and setup window address and size
-+ * based on user CONFIG options. There are times when we don't
-+ * want the MTD driver to be probing the boot or user flash,
-+ * so having the option to enable only one bank is important.
-+ */
-+int setup_flash_params()
-+{
-+	flash_size = 0x4000000; /* 64MB per part */
-+	/* Boot ROM flash bank only; no user bank */
-+	window_addr = 0x1C000000;
-+	window_size = 0x4000000;
-+	/* USERFS from 0x1C00 0000 to 0x1FC00000 */
-+	mirage_partitions[0].size = 0x3C00000;
-+	return 0;
-+}
-+
-+int __init mirage_mtd_init(void)
-+{
-+	struct mtd_partition *parts;
-+	int nb_parts = 0;
-+	char *part_type;
-+	
-+	/* Default flash buswidth */
-+	mirage_map.buswidth = flash_buswidth;
-+
-+	if (setup_flash_params()) 
-+		return -ENXIO;
-+
-+	/*
-+	 * Static partition definition selection
-+	 */
-+	part_type = "static";
-+	parts = mirage_partitions;
-+	nb_parts = NB_OF(mirage_partitions);
-+	mirage_map.size = window_size;
-+
-+	/*
-+	 * Now let's probe for the actual flash.  Do it here since
-+	 * specific machine settings might have been set above.
-+	 */
-+	printk(KERN_NOTICE "Mirage flash: probing %d-bit flash bus\n", 
-+			mirage_map.buswidth*8);
-+	mirage_map.map_priv_1 = 
-+		(unsigned long)ioremap(window_addr, window_size);
-+	mymtd = do_map_probe("cfi_probe", &mirage_map);
-+	if (!mymtd) return -ENXIO;
-+	mymtd->module = THIS_MODULE;
-+
-+	add_mtd_partitions(mymtd, parts, nb_parts);
-+	return 0;
-+}
-+
-+static void __exit mirage_mtd_cleanup(void)
-+{
-+	if (mymtd) {
-+		del_mtd_partitions(mymtd);
-+		map_destroy(mymtd);
-+		if (parsed_parts)
-+			kfree(parsed_parts);
-+	}
-+}
-+
-+module_init(mirage_mtd_init);
-+module_exit(mirage_mtd_cleanup);
-+
-+MODULE_AUTHOR("Embedded Edge");
-+MODULE_DESCRIPTION("Mirage mtd map driver");
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/mtx-1.c linux-2.4.32-rc1.mips/drivers/mtd/maps/mtx-1.c
---- linux-2.4.32-rc1/drivers/mtd/maps/mtx-1.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/mtd/maps/mtx-1.c	2003-06-27 02:04:35.000000000 +0200
-@@ -0,0 +1,181 @@
-+/*
-+ * Flash memory access on 4G Systems MTX-1 board
-+ * 
-+ * (C) 2003 Pete Popov <ppopov@mvista.com>
-+ *	    Bruno Randolf <bruno.randolf@4g-systems.de>
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/io.h>
-+#include <asm/au1000.h>
-+
-+#ifdef 	DEBUG_RW
-+#define	DBG(x...)	printk(x)
-+#else
-+#define	DBG(x...)	
-+#endif
-+
-+#ifdef CONFIG_MIPS_MTX1
-+#define WINDOW_ADDR 0x1E000000
-+#define WINDOW_SIZE 0x2000000
-+#endif
-+
-+__u8 physmap_read8(struct map_info *map, unsigned long ofs)
-+{
-+	__u8 ret;
-+	ret = __raw_readb(map->map_priv_1 + ofs);
-+	DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+__u16 physmap_read16(struct map_info *map, unsigned long ofs)
-+{
-+	__u16 ret;
-+	ret = __raw_readw(map->map_priv_1 + ofs);
-+	DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+__u32 physmap_read32(struct map_info *map, unsigned long ofs)
-+{
-+	__u32 ret;
-+	ret = __raw_readl(map->map_priv_1 + ofs);
-+	DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-+{
-+	DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to);
-+	memcpy_fromio(to, map->map_priv_1 + from, len);
-+}
-+
-+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr)
-+{
-+	DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writeb(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
-+{
-+	DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writew(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr)
-+{
-+	DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writel(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-+{
-+	DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from);
-+	memcpy_toio(map->map_priv_1 + to, from, len);
-+}
-+
-+
-+
-+static struct map_info mtx1_map = {
-+	name:		"MTX-1 flash",
-+	read8: physmap_read8,
-+	read16: physmap_read16,
-+	read32: physmap_read32,
-+	copy_from: physmap_copy_from,
-+	write8: physmap_write8,
-+	write16: physmap_write16,
-+	write32: physmap_write32,
-+	copy_to: physmap_copy_to,
-+};
-+
-+
-+static unsigned long flash_size = 0x01000000;
-+static unsigned char flash_buswidth = 4;
-+static struct mtd_partition mtx1_partitions[] = {
-+        {
-+                name: "user fs",
-+                size: 0x1c00000,
-+                offset: 0,
-+        },{
-+                name: "yamon",
-+                size: 0x0100000,
-+                offset: MTDPART_OFS_APPEND,
-+                mask_flags: MTD_WRITEABLE
-+        },{
-+                name: "raw kernel",
-+                size: 0x02c0000,
-+                offset: MTDPART_OFS_APPEND,
-+        },{
-+                name: "yamon env vars",
-+                size: 0x0040000,
-+                offset: MTDPART_OFS_APPEND,
-+                mask_flags: MTD_WRITEABLE
-+        }
-+};
-+
-+
-+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
-+
-+static struct mtd_partition *parsed_parts;
-+static struct mtd_info *mymtd;
-+
-+int __init mtx1_mtd_init(void)
-+{
-+	struct mtd_partition *parts;
-+	int nb_parts = 0;
-+	char *part_type;
-+	
-+	/* Default flash buswidth */
-+	mtx1_map.buswidth = flash_buswidth;
-+
-+	/*
-+	 * Static partition definition selection
-+	 */
-+	part_type = "static";
-+	parts = mtx1_partitions;
-+	nb_parts = NB_OF(mtx1_partitions);
-+	mtx1_map.size = flash_size;
-+
-+	/*
-+	 * Now let's probe for the actual flash.  Do it here since
-+	 * specific machine settings might have been set above.
-+	 */
-+	printk(KERN_NOTICE "MTX-1 flash: probing %d-bit flash bus\n",
-+			mtx1_map.buswidth*8);
-+	mtx1_map.map_priv_1 =
-+		(unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE);
-+	mymtd = do_map_probe("cfi_probe", &mtx1_map);
-+	if (!mymtd) return -ENXIO;
-+	mymtd->module = THIS_MODULE;
-+
-+	add_mtd_partitions(mymtd, parts, nb_parts);
-+	return 0;
-+}
-+
-+static void __exit mtx1_mtd_cleanup(void)
-+{
-+	if (mymtd) {
-+		del_mtd_partitions(mymtd);
-+		map_destroy(mymtd);
-+		if (parsed_parts)
-+			kfree(parsed_parts);
-+	}
-+}
-+
-+module_init(mtx1_mtd_init);
-+module_exit(mtx1_mtd_cleanup);
-+
-+MODULE_AUTHOR("Pete Popov");
-+MODULE_DESCRIPTION("MTX-1 CFI map driver");
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/pb1550-flash.c linux-2.4.32-rc1.mips/drivers/mtd/maps/pb1550-flash.c
---- linux-2.4.32-rc1/drivers/mtd/maps/pb1550-flash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/mtd/maps/pb1550-flash.c	2004-02-26 01:48:48.000000000 +0100
-@@ -0,0 +1,270 @@
-+/*
-+ * Flash memory access on Alchemy Pb1550 board
-+ * 
-+ * (C) 2004 Embedded Edge, LLC, based on pb1550-flash.c:
-+ * (C) 2003 Pete Popov <ppopov@pacbell.net>
-+ * 
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/io.h>
-+#include <asm/au1000.h>
-+#include <asm/pb1550.h>
-+
-+#ifdef 	DEBUG_RW
-+#define	DBG(x...)	printk(x)
-+#else
-+#define	DBG(x...)	
-+#endif
-+
-+static unsigned long window_addr;
-+static unsigned long window_size;
-+
-+__u8 physmap_read8(struct map_info *map, unsigned long ofs)
-+{
-+	__u8 ret;
-+	ret = __raw_readb(map->map_priv_1 + ofs);
-+	DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+__u16 physmap_read16(struct map_info *map, unsigned long ofs)
-+{
-+	__u16 ret;
-+	ret = __raw_readw(map->map_priv_1 + ofs);
-+	DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+__u32 physmap_read32(struct map_info *map, unsigned long ofs)
-+{
-+	__u32 ret;
-+	ret = __raw_readl(map->map_priv_1 + ofs);
-+	DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-+{
-+	DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to);
-+	memcpy_fromio(to, map->map_priv_1 + from, len);
-+}
-+
-+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr)
-+{
-+	DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writeb(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
-+{
-+	DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writew(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr)
-+{
-+	DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writel(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-+{
-+	DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from);
-+	memcpy_toio(map->map_priv_1 + to, from, len);
-+}
-+
-+static struct map_info pb1550_map = {
-+	name:		"Pb1550 flash",
-+	read8: physmap_read8,
-+	read16: physmap_read16,
-+	read32: physmap_read32,
-+	copy_from: physmap_copy_from,
-+	write8: physmap_write8,
-+	write16: physmap_write16,
-+	write32: physmap_write32,
-+	copy_to: physmap_copy_to,
-+};
-+
-+static unsigned char flash_buswidth = 4;
-+
-+/* 
-+ * Support only 64MB NOR Flash parts
-+ */
-+
-+#ifdef PB1550_BOTH_BANKS
-+/* both banks will be used. Combine the first bank and the first 
-+ * part of the second bank together into a single jffs/jffs2
-+ * partition.
-+ */
-+static struct mtd_partition pb1550_partitions[] = {
-+	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-+	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
-+	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
-+	 */
-+        {
-+                name: "User FS",
-+                size:   (0x1FC00000 - 0x18000000),
-+                offset: 0x0000000
-+        },{
-+                name: "yamon",
-+                size: 0x0100000,
-+		offset:	MTDPART_OFS_APPEND,
-+                mask_flags: MTD_WRITEABLE
-+        },{
-+                name: "raw kernel",
-+		size: (0x300000 - 0x40000), /* last 256KB is yamon env */
-+		offset:	MTDPART_OFS_APPEND,
-+        }
-+};
-+#elif defined(PB1550_BOOT_ONLY)
-+static struct mtd_partition pb1550_partitions[] = {
-+	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-+	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
-+	 */
-+        {
-+                name: "User FS",
-+                size:   0x03c00000,
-+                offset: 0x0000000
-+        },{
-+                name: "yamon",
-+                size: 0x0100000,
-+		offset:	MTDPART_OFS_APPEND,
-+                mask_flags: MTD_WRITEABLE
-+        },{
-+                name: "raw kernel",
-+		size: (0x300000-0x40000), /* last 256KB is yamon env */
-+		offset:	MTDPART_OFS_APPEND,
-+        }
-+};
-+#elif defined(PB1550_USER_ONLY)
-+static struct mtd_partition pb1550_partitions[] = {
-+	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-+	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
-+	 */
-+        {
-+                name: "User FS",
-+                size:  (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */
-+                offset: 0x0000000
-+        },{
-+                name: "raw kernel",
-+		size: MTDPART_SIZ_FULL,
-+		offset:	MTDPART_OFS_APPEND,
-+        }
-+};
-+#else
-+#error MTD_PB1550 define combo error /* should never happen */
-+#endif
-+
-+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
-+
-+static struct mtd_partition *parsed_parts;
-+static struct mtd_info *mymtd;
-+
-+/*
-+ * Probe the flash density and setup window address and size
-+ * based on user CONFIG options. There are times when we don't
-+ * want the MTD driver to be probing the boot or user flash,
-+ * so having the option to enable only one bank is important.
-+ */
-+int setup_flash_params()
-+{
-+	u16 boot_swapboot;
-+	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) | 
-+		((bcsr->status >> 6)  & 0x1);
-+	printk("Pb1550 MTD: boot:swap %d\n", boot_swapboot);
-+
-+	switch (boot_swapboot) {
-+		case 0: /* 512Mbit devices, both enabled */
-+		case 1: 
-+		case 8:
-+		case 9: 
-+#if defined(PB1550_BOTH_BANKS)
-+			window_addr = 0x18000000;
-+			window_size = 0x8000000; 
-+#elif defined(PB1550_BOOT_ONLY)
-+			window_addr = 0x1C000000;
-+			window_size = 0x4000000; 
-+#else /* USER ONLY */
-+			window_addr = 0x1E000000;
-+			window_size = 0x1000000; 
-+#endif
-+			break;
-+		case 0xC:
-+		case 0xD:
-+		case 0xE:
-+		case 0xF: 
-+			/* 64 MB Boot NOR Flash is disabled */
-+			/* and the start address is moved to 0x0C00000 */
-+			window_addr = 0x0C000000;
-+			window_size = 0x4000000; 
-+		default:
-+			printk("Pb1550 MTD: unsupported boot:swap setting\n");
-+			return 1;
-+	}
-+	return 0;
-+}
-+
-+int __init pb1550_mtd_init(void)
-+{
-+	struct mtd_partition *parts;
-+	int nb_parts = 0;
-+	char *part_type;
-+	
-+	/* Default flash buswidth */
-+	pb1550_map.buswidth = flash_buswidth;
-+
-+	if (setup_flash_params()) 
-+		return -ENXIO;
-+
-+	/*
-+	 * Static partition definition selection
-+	 */
-+	part_type = "static";
-+	parts = pb1550_partitions;
-+	nb_parts = NB_OF(pb1550_partitions);
-+	pb1550_map.size = window_size;
-+
-+	/*
-+	 * Now let's probe for the actual flash.  Do it here since
-+	 * specific machine settings might have been set above.
-+	 */
-+	printk(KERN_NOTICE "Pb1550 flash: probing %d-bit flash bus\n", 
-+			pb1550_map.buswidth*8);
-+	pb1550_map.map_priv_1 = 
-+		(unsigned long)ioremap(window_addr, window_size);
-+	mymtd = do_map_probe("cfi_probe", &pb1550_map);
-+	if (!mymtd) return -ENXIO;
-+	mymtd->module = THIS_MODULE;
-+
-+	add_mtd_partitions(mymtd, parts, nb_parts);
-+	return 0;
-+}
-+
-+static void __exit pb1550_mtd_cleanup(void)
-+{
-+	if (mymtd) {
-+		del_mtd_partitions(mymtd);
-+		map_destroy(mymtd);
-+		if (parsed_parts)
-+			kfree(parsed_parts);
-+	}
-+}
-+
-+module_init(pb1550_mtd_init);
-+module_exit(pb1550_mtd_cleanup);
-+
-+MODULE_AUTHOR("Embedded Edge, LLC");
-+MODULE_DESCRIPTION("Pb1550 mtd map driver");
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/pb1xxx-flash.c linux-2.4.32-rc1.mips/drivers/mtd/maps/pb1xxx-flash.c
---- linux-2.4.32-rc1/drivers/mtd/maps/pb1xxx-flash.c	2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/mtd/maps/pb1xxx-flash.c	2003-05-19 08:27:22.000000000 +0200
-@@ -192,6 +192,34 @@
- #else
- #error MTD_PB1500 define combo error /* should never happen */
- #endif
-+#elif defined(CONFIG_MTD_BOSPORUS)
-+static unsigned char flash_buswidth = 2;
-+static unsigned long flash_size 	= 0x02000000;
-+#define WINDOW_ADDR 0x1F000000
-+#define WINDOW_SIZE 0x2000000
-+static struct mtd_partition pb1xxx_partitions[] = {
-+        {
-+                name:   "User FS",
-+                size:   0x00400000,
-+                offset: 0x00000000,
-+        },{
-+                name:   "Yamon-2",
-+                size:   0x00100000,
-+                offset: 0x00400000,
-+        },{
-+                name:   "Root FS",
-+                size:   0x00700000,
-+                offset: 0x00500000,
-+        },{
-+                name:   "Yamon-1",
-+                size:   0x00100000,
-+                offset: 0x00C00000,
-+        },{
-+                name:   "Kernel",
-+                size:   0x00300000,
-+                offset: 0x00D00000,
-+        }
-+};
- #else
- #error Unsupported board
- #endif
-diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/xxs1500.c linux-2.4.32-rc1.mips/drivers/mtd/maps/xxs1500.c
---- linux-2.4.32-rc1/drivers/mtd/maps/xxs1500.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/mtd/maps/xxs1500.c	2003-08-02 04:06:01.000000000 +0200
-@@ -0,0 +1,186 @@
-+/*
-+ * Flash memory access on MyCable XXS1500 board
-+ * 
-+ * (C) 2003 Pete Popov <ppopov@mvista.com>
-+ * 
-+ * $Id: xxs1500.c,v 1.1.2.1 2003/06/13 21:15:46 ppopov Exp $
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/io.h>
-+#include <asm/au1000.h>
-+
-+#ifdef 	DEBUG_RW
-+#define	DBG(x...)	printk(x)
-+#else
-+#define	DBG(x...)	
-+#endif
-+
-+#ifdef CONFIG_MIPS_XXS1500
-+#define WINDOW_ADDR 0x1F000000
-+#define WINDOW_SIZE 0x1000000
-+#endif
-+
-+__u8 physmap_read8(struct map_info *map, unsigned long ofs)
-+{
-+	__u8 ret;
-+	ret = __raw_readb(map->map_priv_1 + ofs);
-+	DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+__u16 physmap_read16(struct map_info *map, unsigned long ofs)
-+{
-+	__u16 ret;
-+	ret = __raw_readw(map->map_priv_1 + ofs);
-+	DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+__u32 physmap_read32(struct map_info *map, unsigned long ofs)
-+{
-+	__u32 ret;
-+	ret = __raw_readl(map->map_priv_1 + ofs);
-+	DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
-+	return ret;
-+}
-+
-+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-+{
-+	DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to);
-+	memcpy_fromio(to, map->map_priv_1 + from, len);
-+}
-+
-+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr)
-+{
-+	DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writeb(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
-+{
-+	DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writew(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr)
-+{
-+	DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
-+	__raw_writel(d, map->map_priv_1 + adr);
-+	mb();
-+}
-+
-+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-+{
-+	DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from);
-+	memcpy_toio(map->map_priv_1 + to, from, len);
-+}
-+
-+
-+
-+static struct map_info xxs1500_map = {
-+	name:		"XXS1500 flash",
-+	read8: physmap_read8,
-+	read16: physmap_read16,
-+	read32: physmap_read32,
-+	copy_from: physmap_copy_from,
-+	write8: physmap_write8,
-+	write16: physmap_write16,
-+	write32: physmap_write32,
-+	copy_to: physmap_copy_to,
-+};
-+
-+
-+static unsigned long flash_size = 0x00800000;
-+static unsigned char flash_buswidth = 4;
-+static struct mtd_partition xxs1500_partitions[] = {
-+        {
-+                name: "kernel image",
-+                size: 0x00200000,
-+                offset: 0,
-+        },{
-+                name: "user fs 0",
-+                size: (0x00C00000-0x200000),
-+                offset: MTDPART_OFS_APPEND,
-+        },{
-+                name: "yamon",
-+                size: 0x00100000,
-+                offset: MTDPART_OFS_APPEND,
-+                mask_flags: MTD_WRITEABLE
-+        },{
-+                name: "user fs 1",
-+                size: 0x2c0000,
-+                offset: MTDPART_OFS_APPEND,
-+        },{
-+                name: "yamon env vars",
-+                size: 0x040000,
-+                offset: MTDPART_OFS_APPEND,
-+                mask_flags: MTD_WRITEABLE
-+        }
-+};
-+
-+
-+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
-+
-+static struct mtd_partition *parsed_parts;
-+static struct mtd_info *mymtd;
-+
-+int __init xxs1500_mtd_init(void)
-+{
-+	struct mtd_partition *parts;
-+	int nb_parts = 0;
-+	char *part_type;
-+	
-+	/* Default flash buswidth */
-+	xxs1500_map.buswidth = flash_buswidth;
-+
-+	/*
-+	 * Static partition definition selection
-+	 */
-+	part_type = "static";
-+	parts = xxs1500_partitions;
-+	nb_parts = NB_OF(xxs1500_partitions);
-+	xxs1500_map.size = flash_size;
-+
-+	/*
-+	 * Now let's probe for the actual flash.  Do it here since
-+	 * specific machine settings might have been set above.
-+	 */
-+	printk(KERN_NOTICE "XXS1500 flash: probing %d-bit flash bus\n", 
-+			xxs1500_map.buswidth*8);
-+	xxs1500_map.map_priv_1 = 
-+		(unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE);
-+	mymtd = do_map_probe("cfi_probe", &xxs1500_map);
-+	if (!mymtd) return -ENXIO;
-+	mymtd->module = THIS_MODULE;
-+
-+	add_mtd_partitions(mymtd, parts, nb_parts);
-+	return 0;
-+}
-+
-+static void __exit xxs1500_mtd_cleanup(void)
-+{
-+	if (mymtd) {
-+		del_mtd_partitions(mymtd);
-+		map_destroy(mymtd);
-+		if (parsed_parts)
-+			kfree(parsed_parts);
-+	}
-+}
-+
-+module_init(xxs1500_mtd_init);
-+module_exit(xxs1500_mtd_cleanup);
-+
-+MODULE_AUTHOR("Pete Popov");
-+MODULE_DESCRIPTION("XXS1500 CFI map driver");
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.32-rc1/drivers/net/defxx.c linux-2.4.32-rc1.mips/drivers/net/defxx.c
---- linux-2.4.32-rc1/drivers/net/defxx.c	2004-11-17 12:54:21.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/net/defxx.c	2004-11-19 01:28:39.000000000 +0100
-@@ -10,24 +10,18 @@
-  *
-  * Abstract:
-  *   A Linux device driver supporting the Digital Equipment Corporation
-- *   FDDI EISA and PCI controller families.  Supported adapters include:
-+ *   FDDI TURBOchannel, EISA and PCI controller families.  Supported
-+ *   adapters include:
-  *
-- *		DEC FDDIcontroller/EISA (DEFEA)
-- *		DEC FDDIcontroller/PCI  (DEFPA)
-+ *		DEC FDDIcontroller/TURBOchannel (DEFTA)
-+ *		DEC FDDIcontroller/EISA         (DEFEA)
-+ *		DEC FDDIcontroller/PCI          (DEFPA)
-  *
-- * Maintainers:
-- *   LVS	Lawrence V. Stefani
-- *
-- * Contact:
-- *	 The author may be reached at:
-+ * The original author:
-+ *   LVS	Lawrence V. Stefani <lstefani@yahoo.com>
-  *
-- *		Inet: stefani@lkg.dec.com
-- *		(NOTE! this address no longer works -jgarzik)
-- *
-- *		Mail: Digital Equipment Corporation
-- *			  550 King Street
-- *			  M/S: LKG1-3/M07
-- *			  Littleton, MA  01460
-+ * Maintainers:
-+ *   macro	Maciej W. Rozycki <macro@linux-mips.org>
-  *
-  * Credits:
-  *   I'd like to thank Patricia Cross for helping me get started with
-@@ -197,16 +191,16 @@
-  *		Sep 2000	tjeerd		Fix leak on unload, cosmetic code cleanup
-  *		Feb 2001			Skb allocation fixes
-  *		Feb 2001	davej		PCI enable cleanups.
-+ *		04 Aug 2003	macro		Converted to the DMA API.
-+ *		14 Aug 2004	macro		Fix device names reported.
-+ *		26 Sep 2004	macro		TURBOchannel support.
-  */
- 
- /* Include files */
- 
- #include <linux/module.h>
--
- #include <linux/kernel.h>
--#include <linux/sched.h>
- #include <linux/string.h>
--#include <linux/ptrace.h>
- #include <linux/errno.h>
- #include <linux/ioport.h>
- #include <linux/slab.h>
-@@ -215,19 +209,33 @@
- #include <linux/delay.h>
- #include <linux/init.h>
- #include <linux/netdevice.h>
-+#include <linux/fddidevice.h>
-+#include <linux/skbuff.h>
-+
- #include <asm/byteorder.h>
- #include <asm/bitops.h>
- #include <asm/io.h>
- 
--#include <linux/fddidevice.h>
--#include <linux/skbuff.h>
-+#ifdef CONFIG_TC
-+#include <asm/dec/tc.h>
-+#else
-+static int search_tc_card(const char *name) { return -ENODEV; }
-+static void claim_tc_card(int slot) { }
-+static void release_tc_card(int slot) { }
-+static unsigned long get_tc_base_addr(int slot) { return 0; }
-+static unsigned long get_tc_irq_nr(int slot) { return -1; }
-+#endif
- 
- #include "defxx.h"
- 
--/* Version information string - should be updated prior to each new release!!! */
-+/* Version information string should be updated prior to each new release!  */
-+#define DRV_NAME "defxx"
-+#define DRV_VERSION "v1.07T"
-+#define DRV_RELDATE "2004/09/26"
- 
- static char version[] __devinitdata =
--	"defxx.c:v1.05e 2001/02/03  Lawrence V. Stefani and others\n";
-+	DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
-+	"  Lawrence V. Stefani and others\n";
- 
- #define DYNAMIC_BUFFERS 1
- 
-@@ -243,7 +251,7 @@
- static void		dfx_bus_init(struct net_device *dev);
- static void		dfx_bus_config_check(DFX_board_t *bp);
- 
--static int		dfx_driver_init(struct net_device *dev);
-+static int		dfx_driver_init(struct net_device *dev, const char *print_name);
- static int		dfx_adap_init(DFX_board_t *bp, int get_buffers);
- 
- static int		dfx_open(struct net_device *dev);
-@@ -337,48 +345,84 @@
- 	int			offset,
- 	u8			data
- 	)
-+{
-+	if (bp->bus_type == DFX_BUS_TYPE_TC)
-+	{
-+	volatile u8 *addr = (void *)(bp->base_addr + offset);
- 
-+	*addr = data;
-+	mb();
-+	}
-+	else
- 	{
- 	u16 port = bp->base_addr + offset;
- 
- 	outb(data, port);
- 	}
-+}
- 
- static inline void dfx_port_read_byte(
- 	DFX_board_t	*bp,
- 	int			offset,
- 	u8			*data
- 	)
-+{
-+	if (bp->bus_type == DFX_BUS_TYPE_TC)
-+	{
-+	volatile u8 *addr = (void *)(bp->base_addr + offset);
- 
-+	mb();
-+	*data = *addr;
-+	}
-+	else
- 	{
- 	u16 port = bp->base_addr + offset;
- 
- 	*data = inb(port);
- 	}
-+}
- 
- static inline void dfx_port_write_long(
- 	DFX_board_t	*bp,
- 	int			offset,
- 	u32			data
- 	)
-+{
-+	if (bp->bus_type == DFX_BUS_TYPE_TC)
-+	{
-+	volatile u32 *addr = (void *)(bp->base_addr + offset);
- 
-+	*addr = data;
-+	mb();
-+	}
-+	else
- 	{
- 	u16 port = bp->base_addr + offset;
- 
- 	outl(data, port);
- 	}
-+}
- 
- static inline void dfx_port_read_long(
- 	DFX_board_t	*bp,
- 	int			offset,
- 	u32			*data
- 	)
-+{
-+	if (bp->bus_type == DFX_BUS_TYPE_TC)
-+	{
-+	volatile u32 *addr = (void *)(bp->base_addr + offset);
- 
-+	mb();
-+	*data = *addr;
-+	}
-+	else
- 	{
- 	u16 port = bp->base_addr + offset;
- 
- 	*data = inl(port);
- 	}
-+}
- 
- 
- /*
-@@ -393,8 +437,9 @@
-  *   Condition code
-  *       
-  * Arguments:
-- *   pdev - pointer to pci device information (NULL for EISA)
-- *   ioaddr - pointer to port (NULL for PCI)
-+ *   pdev - pointer to pci device information (NULL for EISA or TURBOchannel)
-+ *   bus_type - bus type (one of DFX_BUS_TYPE_*)
-+ *   handle - bus-specific data: slot (TC), pointer to port (EISA), NULL (PCI)
-  *
-  * Functional Description:
-  *
-@@ -410,54 +455,68 @@
-  *   initialized and the board resources are read and stored in
-  *   the device structure.
-  */
--static int __devinit dfx_init_one_pci_or_eisa(struct pci_dev *pdev, long ioaddr)
-+static int __devinit dfx_init_one_pci_or_eisa(struct pci_dev *pdev, u32 bus_type, long handle)
- {
-+	static int version_disp;
-+	char *print_name = DRV_NAME;
- 	struct net_device *dev;
- 	DFX_board_t	  *bp;			/* board pointer */
-+	long ioaddr;				/* pointer to port */
-+	unsigned long len;			/* resource length */
-+	int alloc_size;				/* total buffer size used */
- 	int err;
- 
--#ifndef MODULE
--	static int version_disp;
--
--	if (!version_disp)	/* display version info if adapter is found */
--	{
-+	if (!version_disp) {	/* display version info if adapter is found */
- 		version_disp = 1;	/* set display flag to TRUE so that */
- 		printk(version);	/* we only display this string ONCE */
- 	}
--#endif
- 
--	/*
--	 * init_fddidev() allocates a device structure with private data, clears the device structure and private data,
--	 * and  calls fddi_setup() and register_netdev(). Not much left to do for us here.
--	 */
--	dev = init_fddidev(NULL, sizeof(*bp));
-+	if (pdev != NULL)
-+		print_name = pdev->slot_name;
-+
-+	dev = alloc_fddidev(sizeof(*bp));
- 	if (!dev) {
--		printk (KERN_ERR "defxx: unable to allocate fddidev, aborting\n");
-+		printk(KERN_ERR "%s: unable to allocate fddidev, aborting\n",
-+		       print_name);
- 		return -ENOMEM;
- 	}
- 
- 	/* Enable PCI device. */
--	if (pdev != NULL) {
-+	if (bus_type == DFX_BUS_TYPE_PCI) {
- 		err = pci_enable_device (pdev);
- 		if (err) goto err_out;
- 		ioaddr = pci_resource_start (pdev, 1);
- 	}
- 
- 	SET_MODULE_OWNER(dev);
-+	SET_NETDEV_DEV(dev, &pdev->dev);
- 
- 	bp = dev->priv;
- 
--	if (!request_region (ioaddr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN, dev->name)) {
--		printk (KERN_ERR "%s: Cannot reserve I/O resource 0x%x @ 0x%lx, aborting\n",
--			dev->name, PFI_K_CSR_IO_LEN, ioaddr);
-+	if (bus_type == DFX_BUS_TYPE_TC) {
-+		/* TURBOchannel board */
-+		bp->slot = handle;
-+		claim_tc_card(bp->slot);
-+		ioaddr = get_tc_base_addr(handle) + PI_TC_K_CSR_OFFSET;
-+		len = PI_TC_K_CSR_LEN;
-+	} else if (bus_type == DFX_BUS_TYPE_EISA) {
-+		/* EISA board */
-+		ioaddr = handle;
-+		len = PI_ESIC_K_CSR_IO_LEN;
-+	} else
-+		/* PCI board */
-+		len = PFI_K_CSR_IO_LEN;
-+	dev->base_addr			= ioaddr; /* save port (I/O) base address */
-+
-+	if (!request_region(ioaddr, len, print_name)) {
-+		printk(KERN_ERR "%s: Cannot reserve I/O resource "
-+		       "0x%lx @ 0x%lx, aborting\n", print_name, len, ioaddr);
- 		err = -EBUSY;
- 		goto err_out;
- 	}
- 
- 	/* Initialize new device structure */
- 
--	dev->base_addr			= ioaddr; /* save port (I/O) base address */
--
- 	dev->get_stats			= dfx_ctl_get_stats;
- 	dev->open			= dfx_open;
- 	dev->stop			= dfx_close;
-@@ -465,37 +524,54 @@
- 	dev->set_multicast_list		= dfx_ctl_set_multicast_list;
- 	dev->set_mac_address		= dfx_ctl_set_mac_address;
- 
--	if (pdev == NULL) {
--		/* EISA board */
--		bp->bus_type = DFX_BUS_TYPE_EISA;
-+	bp->bus_type = bus_type;
-+	if (bus_type == DFX_BUS_TYPE_TC || bus_type == DFX_BUS_TYPE_EISA) {
-+		/* TURBOchannel or EISA board */
- 		bp->next = root_dfx_eisa_dev;
- 		root_dfx_eisa_dev = dev;
- 	} else {
- 		/* PCI board */
--		bp->bus_type = DFX_BUS_TYPE_PCI;
- 		bp->pci_dev = pdev;
- 		pci_set_drvdata (pdev, dev);
- 		pci_set_master (pdev);
- 	}
- 
--	if (dfx_driver_init(dev) != DFX_K_SUCCESS) {
-+
-+	if (dfx_driver_init(dev, print_name) != DFX_K_SUCCESS) {
- 		err = -ENODEV;
- 		goto err_out_region;
- 	}
- 
-+	err = register_netdev(dev);
-+	if (err)
-+		goto err_out_kfree;
-+
-+	printk("%s: registered as %s\n", print_name, dev->name);
- 	return 0;
- 
-+err_out_kfree:
-+	alloc_size = sizeof(PI_DESCR_BLOCK) +
-+		     PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
-+#ifndef DYNAMIC_BUFFERS
-+		     (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
-+#endif
-+		     sizeof(PI_CONSUMER_BLOCK) +
-+		     (PI_ALIGN_K_DESC_BLK - 1);
-+	if (bp->kmalloced)
-+		pci_free_consistent(pdev, alloc_size,
-+				    bp->kmalloced, bp->kmalloced_dma);
- err_out_region:
--	release_region(ioaddr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN);
-+	release_region(ioaddr, len);
- err_out:
--	unregister_netdev(dev);
--	kfree(dev);
-+	if (bp->bus_type == DFX_BUS_TYPE_TC)
-+		release_tc_card(bp->slot);
-+	free_netdev(dev);
- 	return err;
- }
- 
- static int __devinit dfx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
- {
--	return dfx_init_one_pci_or_eisa(pdev, 0);
-+	return dfx_init_one_pci_or_eisa(pdev, DFX_BUS_TYPE_PCI, 0);
- }
- 
- static int __init dfx_eisa_init(void)
-@@ -507,6 +583,7 @@
- 
- 	DBG_printk("In dfx_eisa_init...\n");
- 
-+#ifdef CONFIG_EISA
- 	/* Scan for FDDI EISA controllers */
- 
- 	for (i=0; i < DFX_MAX_EISA_SLOTS; i++)		/* only scan for up to 16 EISA slots */
-@@ -517,9 +594,27 @@
- 		{
- 			port = (i << 12);					/* recalc base addr */
- 
--			if (dfx_init_one_pci_or_eisa(NULL, port) == 0) rc = 0;
-+			if (dfx_init_one_pci_or_eisa(NULL, DFX_BUS_TYPE_EISA, port) == 0) rc = 0;
- 		}
- 	}
-+#endif
-+	return rc;
-+}
-+
-+static int __init dfx_tc_init(void)
-+{
-+	int rc = -ENODEV;
-+	int slot;		/* TC slot number */
-+
-+	DBG_printk("In dfx_tc_init...\n");
-+
-+	/* Scan for FDDI TC controllers */
-+	while ((slot = search_tc_card("PMAF-F")) >= 0) {
-+		if (dfx_init_one_pci_or_eisa(NULL, DFX_BUS_TYPE_TC, slot) == 0)
-+			rc = 0;
-+		else
-+			break;
-+	}
- 	return rc;
- }
- 
-@@ -583,8 +678,9 @@
- 
- 	/* Initialize adapter based on bus type */
- 
--	if (bp->bus_type == DFX_BUS_TYPE_EISA)
--		{
-+	if (bp->bus_type == DFX_BUS_TYPE_TC) {
-+		dev->irq = get_tc_irq_nr(bp->slot);
-+	} else if (bp->bus_type == DFX_BUS_TYPE_EISA) {
- 		/* Get the interrupt level from the ESIC chip */
- 
- 		dfx_port_read_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, &val);
-@@ -766,6 +862,7 @@
-  *       
-  * Arguments:
-  *   dev - pointer to device information
-+ *   print_name - printable device name
-  *
-  * Functional Description:
-  *   This function allocates additional resources such as the host memory
-@@ -780,20 +877,21 @@
-  *						or read adapter MAC address
-  *
-  * Assumptions:
-- *   Memory allocated from kmalloc() call is physically contiguous, locked
-- *   memory whose physical address equals its virtual address.
-+ *   Memory allocated from pci_alloc_consistent() call is physically
-+ *   contiguous, locked memory.
-  *
-  * Side Effects:
-  *   Adapter is reset and should be in DMA_UNAVAILABLE state before
-  *   returning from this routine.
-  */
- 
--static int __devinit dfx_driver_init(struct net_device *dev)
-+static int __devinit dfx_driver_init(struct net_device *dev,
-+				     const char *print_name)
- {
- 	DFX_board_t *bp = dev->priv;
- 	int			alloc_size;			/* total buffer size needed */
- 	char		*top_v, *curr_v;	/* virtual addrs into memory block */
--	u32			top_p, curr_p;		/* physical addrs into memory block */
-+	dma_addr_t		top_p, curr_p;		/* physical addrs into memory block */
- 	u32			data;				/* host data register value */
- 
- 	DBG_printk("In dfx_driver_init...\n");
-@@ -837,26 +935,20 @@
- 
- 	/*  Read the factory MAC address from the adapter then save it */
- 
--	if (dfx_hw_port_ctrl_req(bp,
--							PI_PCTRL_M_MLA,
--							PI_PDATA_A_MLA_K_LO,
--							0,
--							&data) != DFX_K_SUCCESS)
--		{
--		printk("%s: Could not read adapter factory MAC address!\n", dev->name);
-+	if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_LO, 0,
-+				 &data) != DFX_K_SUCCESS) {
-+		printk("%s: Could not read adapter factory MAC address!\n",
-+		       print_name);
- 		return(DFX_K_FAILURE);
--		}
-+	}
- 	memcpy(&bp->factory_mac_addr[0], &data, sizeof(u32));
- 
--	if (dfx_hw_port_ctrl_req(bp,
--							PI_PCTRL_M_MLA,
--							PI_PDATA_A_MLA_K_HI,
--							0,
--							&data) != DFX_K_SUCCESS)
--		{
--		printk("%s: Could not read adapter factory MAC address!\n", dev->name);
-+	if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0,
-+				 &data) != DFX_K_SUCCESS) {
-+		printk("%s: Could not read adapter factory MAC address!\n",
-+		       print_name);
- 		return(DFX_K_FAILURE);
--		}
-+	}
- 	memcpy(&bp->factory_mac_addr[4], &data, sizeof(u16));
- 
- 	/*
-@@ -867,28 +959,27 @@
- 	 */
- 
- 	memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN);
--	if (bp->bus_type == DFX_BUS_TYPE_EISA)
--		printk("%s: DEFEA at I/O addr = 0x%lX, IRQ = %d, Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
--				dev->name,
--				dev->base_addr,
--				dev->irq,
--				dev->dev_addr[0],
--				dev->dev_addr[1],
--				dev->dev_addr[2],
--				dev->dev_addr[3],
--				dev->dev_addr[4],
--				dev->dev_addr[5]);
-+	if (bp->bus_type == DFX_BUS_TYPE_TC)
-+		printk("%s: DEFTA at addr = 0x%lX, IRQ = %d, "
-+		       "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
-+		       print_name, dev->base_addr, dev->irq,
-+		       dev->dev_addr[0], dev->dev_addr[1],
-+		       dev->dev_addr[2], dev->dev_addr[3],
-+		       dev->dev_addr[4], dev->dev_addr[5]);
-+	else if (bp->bus_type == DFX_BUS_TYPE_EISA)
-+		printk("%s: DEFEA at I/O addr = 0x%lX, IRQ = %d, "
-+		       "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
-+		       print_name, dev->base_addr, dev->irq,
-+		       dev->dev_addr[0], dev->dev_addr[1],
-+		       dev->dev_addr[2], dev->dev_addr[3],
-+		       dev->dev_addr[4], dev->dev_addr[5]);
- 	else
--		printk("%s: DEFPA at I/O addr = 0x%lX, IRQ = %d, Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
--				dev->name,
--				dev->base_addr,
--				dev->irq,
--				dev->dev_addr[0],
--				dev->dev_addr[1],
--				dev->dev_addr[2],
--				dev->dev_addr[3],
--				dev->dev_addr[4],
--				dev->dev_addr[5]);
-+		printk("%s: DEFPA at I/O addr = 0x%lX, IRQ = %d, "
-+		       "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
-+		       print_name, dev->base_addr, dev->irq,
-+		       dev->dev_addr[0], dev->dev_addr[1],
-+		       dev->dev_addr[2], dev->dev_addr[3],
-+		       dev->dev_addr[4], dev->dev_addr[5]);
- 
- 	/*
- 	 * Get memory for descriptor block, consumer block, and other buffers
-@@ -903,14 +994,15 @@
- #endif
- 					sizeof(PI_CONSUMER_BLOCK) +
- 					(PI_ALIGN_K_DESC_BLK - 1);
--	bp->kmalloced = top_v = (char *) kmalloc(alloc_size, GFP_KERNEL);
--	if (top_v == NULL)
--		{
--		printk("%s: Could not allocate memory for host buffers and structures!\n", dev->name);
-+	bp->kmalloced = top_v = pci_alloc_consistent(bp->pci_dev, alloc_size,
-+						     &bp->kmalloced_dma);
-+	if (top_v == NULL) {
-+		printk("%s: Could not allocate memory for host buffers "
-+		       "and structures!\n", print_name);
- 		return(DFX_K_FAILURE);
--		}
-+	}
- 	memset(top_v, 0, alloc_size);	/* zero out memory before continuing */
--	top_p = virt_to_bus(top_v);		/* get physical address of buffer */
-+	top_p = bp->kmalloced_dma;	/* get physical address of buffer */
- 
- 	/*
- 	 *  To guarantee the 8K alignment required for the descriptor block, 8K - 1
-@@ -924,7 +1016,7 @@
- 	 *		  for allocating the needed memory.
- 	 */
- 
--	curr_p = (u32) (ALIGN(top_p, PI_ALIGN_K_DESC_BLK));
-+	curr_p = ALIGN(top_p, PI_ALIGN_K_DESC_BLK);
- 	curr_v = top_v + (curr_p - top_p);
- 
- 	/* Reserve space for descriptor block */
-@@ -965,14 +1057,20 @@
- 
- 	/* Display virtual and physical addresses if debug driver */
- 
--	DBG_printk("%s: Descriptor block virt = %0lX, phys = %0X\n",				dev->name, (long)bp->descr_block_virt,	bp->descr_block_phys);
--	DBG_printk("%s: Command Request buffer virt = %0lX, phys = %0X\n",			dev->name, (long)bp->cmd_req_virt,		bp->cmd_req_phys);
--	DBG_printk("%s: Command Response buffer virt = %0lX, phys = %0X\n",			dev->name, (long)bp->cmd_rsp_virt,		bp->cmd_rsp_phys);
--	DBG_printk("%s: Receive buffer block virt = %0lX, phys = %0X\n",			dev->name, (long)bp->rcv_block_virt,	bp->rcv_block_phys);
--	DBG_printk("%s: Consumer block virt = %0lX, phys = %0X\n",				dev->name, (long)bp->cons_block_virt,	bp->cons_block_phys);
-+	DBG_printk("%s: Descriptor block virt = %0lX, phys = %0X\n",
-+		   print_name,
-+		   (long)bp->descr_block_virt, bp->descr_block_phys);
-+	DBG_printk("%s: Command Request buffer virt = %0lX, phys = %0X\n",
-+		   print_name, (long)bp->cmd_req_virt, bp->cmd_req_phys);
-+	DBG_printk("%s: Command Response buffer virt = %0lX, phys = %0X\n",
-+		   print_name, (long)bp->cmd_rsp_virt, bp->cmd_rsp_phys);
-+	DBG_printk("%s: Receive buffer block virt = %0lX, phys = %0X\n",
-+		   print_name, (long)bp->rcv_block_virt, bp->rcv_block_phys);
-+	DBG_printk("%s: Consumer block virt = %0lX, phys = %0X\n",
-+		   print_name, (long)bp->cons_block_virt, bp->cons_block_phys);
- 
- 	return(DFX_K_SUCCESS);
--	}
-+}
- 
- 
- /*
-@@ -1218,7 +1316,9 @@
- 	
- 	/* Register IRQ - support shared interrupts by passing device ptr */
- 
--	ret = request_irq(dev->irq, (void *)dfx_interrupt, SA_SHIRQ, dev->name, dev);
-+	ret = request_irq(dev->irq, (void *)dfx_interrupt,
-+			  (bp->bus_type == DFX_BUS_TYPE_TC) ? 0 : SA_SHIRQ,
-+			  dev->name, dev);
- 	if (ret) {
- 		printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq);
- 		return ret;
-@@ -1737,7 +1837,7 @@
- 		dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL,
- 					(PFI_MODE_M_PDQ_INT_ENB + PFI_MODE_M_DMA_ENB));
- 		}
--	else
-+	else if (bp->bus_type == DFX_BUS_TYPE_EISA)
- 		{
- 		/* Disable interrupts at the ESIC */
- 
-@@ -1755,6 +1855,13 @@
- 		tmp |= PI_CONFIG_STAT_0_M_INT_ENB;
- 		dfx_port_write_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, tmp);
- 		}
-+	else {
-+		/* TC doesn't share interrupts so no need to disable them */
-+
-+		/* Call interrupt service routine for this adapter */
-+
-+		dfx_int_common(dev);
-+	}
- 
- 	spin_unlock(&bp->lock);
- 	}
-@@ -2663,12 +2770,12 @@
-  
- static void my_skb_align(struct sk_buff *skb, int n)
- {
--	u32 x=(u32)skb->data;	/* We only want the low bits .. */
--	u32 v;
-+	unsigned long x = (unsigned long)skb->data;
-+	unsigned long v;
- 	
--	v=(x+n-1)&~(n-1);	/* Where we want to be */
-+	v = ALIGN(x, n);	/* Where we want to be */
- 	
--	skb_reserve(skb, v-x);
-+	skb_reserve(skb, v - x);
- }
- 
- 
-@@ -2745,7 +2852,10 @@
- 			 */
- 			 
- 			my_skb_align(newskb, 128);
--			bp->descr_block_virt->rcv_data[i+j].long_1 = virt_to_bus(newskb->data);
-+			bp->descr_block_virt->rcv_data[i + j].long_1 =
-+				(u32)pci_map_single(bp->pci_dev, newskb->data,
-+						    NEW_SKB_SIZE,
-+						    PCI_DMA_FROMDEVICE);
- 			/*
- 			 * p_rcv_buff_va is only used inside the
- 			 * kernel so we put the skb pointer here.
-@@ -2859,9 +2969,17 @@
- 						
- 						my_skb_align(newskb, 128);
- 						skb = (struct sk_buff *)bp->p_rcv_buff_va[entry];
-+						pci_unmap_single(bp->pci_dev,
-+							bp->descr_block_virt->rcv_data[entry].long_1,
-+							NEW_SKB_SIZE,
-+							PCI_DMA_FROMDEVICE);
- 						skb_reserve(skb, RCV_BUFF_K_PADDING);
- 						bp->p_rcv_buff_va[entry] = (char *)newskb;
--						bp->descr_block_virt->rcv_data[entry].long_1 = virt_to_bus(newskb->data);
-+						bp->descr_block_virt->rcv_data[entry].long_1 =
-+							(u32)pci_map_single(bp->pci_dev,
-+								newskb->data,
-+								NEW_SKB_SIZE,
-+								PCI_DMA_FROMDEVICE);
- 					} else
- 						skb = NULL;
- 				} else
-@@ -2934,7 +3052,7 @@
-  *   is contained in a single physically contiguous buffer
-  *   in which the virtual address of the start of packet
-  *   (skb->data) can be converted to a physical address
-- *   by using virt_to_bus().
-+ *   by using pci_map_single().
-  *
-  *   Since the adapter architecture requires a three byte
-  *   packet request header to prepend the start of packet,
-@@ -3082,12 +3200,13 @@
- 	 *			skb->data.
- 	 *		 6. The physical address of the start of packet
- 	 *			can be determined from the virtual address
--	 *			by using virt_to_bus() and is only 32-bits
-+	 *			by using pci_map_single() and is only 32-bits
- 	 *			wide.
- 	 */
- 
- 	p_xmt_descr->long_0	= (u32) (PI_XMT_DESCR_M_SOP | PI_XMT_DESCR_M_EOP | ((skb->len) << PI_XMT_DESCR_V_SEG_LEN));
--	p_xmt_descr->long_1 = (u32) virt_to_bus(skb->data);
-+	p_xmt_descr->long_1 = (u32)pci_map_single(bp->pci_dev, skb->data,
-+						  skb->len, PCI_DMA_TODEVICE);
- 
- 	/*
- 	 * Verify that descriptor is actually available
-@@ -3171,6 +3290,7 @@
- 	{
- 	XMT_DRIVER_DESCR	*p_xmt_drv_descr;	/* ptr to transmit driver descriptor */
- 	PI_TYPE_2_CONSUMER	*p_type_2_cons;		/* ptr to rcv/xmt consumer block register */
-+	u8			comp;			/* local transmit completion index */
- 	int 			freed = 0;		/* buffers freed */
- 
- 	/* Service all consumed transmit frames */
-@@ -3188,7 +3308,11 @@
- 		bp->xmt_total_bytes += p_xmt_drv_descr->p_skb->len;
- 
- 		/* Return skb to operating system */
--
-+		comp = bp->rcv_xmt_reg.index.xmt_comp;
-+		pci_unmap_single(bp->pci_dev,
-+				 bp->descr_block_virt->xmt_data[comp].long_1,
-+				 p_xmt_drv_descr->p_skb->len,
-+				 PCI_DMA_TODEVICE);
- 		dev_kfree_skb_irq(p_xmt_drv_descr->p_skb);
- 
- 		/*
-@@ -3297,6 +3421,7 @@
- 	{
- 	u32			prod_cons;		/* rcv/xmt consumer block longword */
- 	XMT_DRIVER_DESCR	*p_xmt_drv_descr;	/* ptr to transmit driver descriptor */
-+	u8			comp;			/* local transmit completion index */
- 
- 	/* Flush all outstanding transmit frames */
- 
-@@ -3307,7 +3432,11 @@
- 		p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[bp->rcv_xmt_reg.index.xmt_comp]);
- 
- 		/* Return skb to operating system */
--
-+		comp = bp->rcv_xmt_reg.index.xmt_comp;
-+		pci_unmap_single(bp->pci_dev,
-+				 bp->descr_block_virt->xmt_data[comp].long_1,
-+				 p_xmt_drv_descr->p_skb->len,
-+				 PCI_DMA_TODEVICE);
- 		dev_kfree_skb(p_xmt_drv_descr->p_skb);
- 
- 		/* Increment transmit error counter */
-@@ -3337,12 +3466,36 @@
- 
- static void __devexit dfx_remove_one_pci_or_eisa(struct pci_dev *pdev, struct net_device *dev)
- {
--	DFX_board_t	  *bp = dev->priv;
-+	DFX_board_t	*bp = dev->priv;
-+	unsigned long	len;			/* resource length */
-+	int		alloc_size;		/* total buffer size used */
- 
-+	if (bp->bus_type == DFX_BUS_TYPE_TC) {
-+		/* TURBOchannel board */
-+		len = PI_TC_K_CSR_LEN;
-+	} else if (bp->bus_type == DFX_BUS_TYPE_EISA) {
-+		/* EISA board */
-+		len = PI_ESIC_K_CSR_IO_LEN;
-+	} else {
-+		len = PFI_K_CSR_IO_LEN;
-+	}
- 	unregister_netdev(dev);
--	release_region(dev->base_addr,  pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN );
--	if (bp->kmalloced) kfree(bp->kmalloced);
--	kfree(dev);
-+	release_region(dev->base_addr, len);
-+
-+	if (bp->bus_type == DFX_BUS_TYPE_TC)
-+		release_tc_card(bp->slot);
-+
-+	alloc_size = sizeof(PI_DESCR_BLOCK) +
-+		     PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
-+#ifndef DYNAMIC_BUFFERS
-+		     (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
-+#endif
-+		     sizeof(PI_CONSUMER_BLOCK) +
-+		     (PI_ALIGN_K_DESC_BLK - 1);
-+	if (bp->kmalloced)
-+		pci_free_consistent(pdev, alloc_size, bp->kmalloced,
-+				    bp->kmalloced_dma);
-+	free_netdev(dev);
- }
- 
- static void __devexit dfx_remove_one (struct pci_dev *pdev)
-@@ -3353,21 +3506,22 @@
- 	pci_set_drvdata(pdev, NULL);
- }
- 
--static struct pci_device_id dfx_pci_tbl[] __devinitdata = {
-+static struct pci_device_id dfx_pci_tbl[] = {
- 	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_FDDI, PCI_ANY_ID, PCI_ANY_ID, },
- 	{ 0, }
- };
- MODULE_DEVICE_TABLE(pci, dfx_pci_tbl);
- 
- static struct pci_driver dfx_driver = {
--	name:		"defxx",
--	probe:		dfx_init_one,
--	remove:		__devexit_p(dfx_remove_one),
--	id_table:	dfx_pci_tbl,
-+	.name		= "defxx",
-+	.probe		= dfx_init_one,
-+	.remove		= __devexit_p(dfx_remove_one),
-+	.id_table	= dfx_pci_tbl,
- };
- 
- static int dfx_have_pci;
- static int dfx_have_eisa;
-+static int dfx_have_tc;
- 
- 
- static void __exit dfx_eisa_cleanup(void)
-@@ -3388,12 +3542,7 @@
- 
- static int __init dfx_init(void)
- {
--	int rc_pci, rc_eisa;
--
--/* when a module, this is printed whether or not devices are found in probe */
--#ifdef MODULE
--	printk(version);
--#endif
-+	int rc_pci, rc_eisa, rc_tc;
- 
- 	rc_pci = pci_module_init(&dfx_driver);
- 	if (rc_pci >= 0) dfx_have_pci = 1;
-@@ -3401,20 +3550,27 @@
- 	rc_eisa = dfx_eisa_init();
- 	if (rc_eisa >= 0) dfx_have_eisa = 1;
- 
--	return ((rc_eisa < 0) ? 0 : rc_eisa)  + ((rc_pci < 0) ? 0 : rc_pci); 
-+	rc_tc = dfx_tc_init();
-+	if (rc_tc >= 0) dfx_have_tc = 1;
-+
-+	return ((rc_tc < 0) ? 0 : rc_tc) +
-+	       ((rc_eisa < 0) ? 0 : rc_eisa) +
-+	       ((rc_pci < 0) ? 0 : rc_pci); 
- }
- 
- static void __exit dfx_cleanup(void)
- {
- 	if (dfx_have_pci)
- 		pci_unregister_driver(&dfx_driver);
--	if (dfx_have_eisa)
-+	if (dfx_have_eisa || dfx_have_tc)
- 		dfx_eisa_cleanup();
--		
- }	
- 
- module_init(dfx_init);
- module_exit(dfx_cleanup);
-+MODULE_AUTHOR("Lawrence V. Stefani");
-+MODULE_DESCRIPTION("DEC FDDIcontroller EISA/PCI (DEFEA/DEFPA) driver "
-+		   DRV_VERSION " " DRV_RELDATE);
- MODULE_LICENSE("GPL");
- 
- 
-diff -Nur linux-2.4.32-rc1/drivers/net/defxx.h linux-2.4.32-rc1.mips/drivers/net/defxx.h
---- linux-2.4.32-rc1/drivers/net/defxx.h	2001-02-13 22:15:05.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/net/defxx.h	2004-10-03 20:06:48.000000000 +0200
-@@ -12,17 +12,11 @@
-  *   Contains all definitions specified by port specification and required
-  *   by the defxx.c driver.
-  *
-- * Maintainers:
-- *   LVS	Lawrence V. Stefani
-- *
-- * Contact:
-- *	 The author may be reached at:
-+ * The original author:
-+ *   LVS	Lawrence V. Stefani <lstefani@yahoo.com>
-  *
-- *		Inet: stefani@lkg.dec.com
-- *		Mail: Digital Equipment Corporation
-- *			  550 King Street
-- *			  M/S: LKG1-3/M07
-- *			  Littleton, MA  01460
-+ * Maintainers:
-+ *   macro	Maciej W. Rozycki <macro@linux-mips.org>
-  *
-  * Modification History:
-  *		Date		Name	Description
-@@ -30,6 +24,7 @@
-  *		09-Sep-96	LVS		Added group_prom field.  Moved read/write I/O
-  *							macros to DEFXX.C.
-  *		12-Sep-96	LVS		Removed packet request header pointers.
-+ *		04 Aug 2003	macro		Converted to the DMA API.
-  */
- 
- #ifndef _DEFXX_H_
-@@ -1467,6 +1462,11 @@
- 
- #endif	/* #ifndef BIG_ENDIAN */
- 
-+/* Define TC PDQ CSR offset and length */
-+
-+#define PI_TC_K_CSR_OFFSET		0x100000
-+#define PI_TC_K_CSR_LEN			0x80		/* 128 bytes */
-+
- /* Define EISA controller register offsets */
- 
- #define PI_ESIC_K_BURST_HOLDOFF		0x040
-@@ -1634,6 +1634,7 @@
- 
- #define DFX_BUS_TYPE_PCI		0			/* type code for DEC FDDIcontroller/PCI */
- #define DFX_BUS_TYPE_EISA		1			/* type code for DEC FDDIcontroller/EISA */
-+#define DFX_BUS_TYPE_TC			2			/* type code for DEC FDDIcontroller/TURBOchannel */
- 
- #define DFX_FC_PRH2_PRH1_PRH0		0x54003820	/* Packet Request Header bytes + FC */
- #define DFX_PRH0_BYTE			0x20		/* Packet Request Header byte 0 */
-@@ -1704,17 +1705,19 @@
- 	{
- 	/* Keep virtual and physical pointers to locked, physically contiguous memory */
- 
--	char				*kmalloced;					/* kfree this on unload */ 
-+	char				*kmalloced;					/* pci_free_consistent this on unload */ 
-+	dma_addr_t			kmalloced_dma;
-+	/* DMA handle for the above */
- 	PI_DESCR_BLOCK			*descr_block_virt;				/* PDQ descriptor block virt address */
--	u32				descr_block_phys;				/* PDQ descriptor block phys address */
-+	dma_addr_t			descr_block_phys;				/* PDQ descriptor block phys address */
- 	PI_DMA_CMD_REQ			*cmd_req_virt;					/* Command request buffer virt address */
--	u32				cmd_req_phys;					/* Command request buffer phys address */
-+	dma_addr_t			cmd_req_phys;					/* Command request buffer phys address */
- 	PI_DMA_CMD_RSP			*cmd_rsp_virt;					/* Command response buffer virt address */
--	u32				cmd_rsp_phys;					/* Command response buffer phys address */
-+	dma_addr_t			cmd_rsp_phys;					/* Command response buffer phys address */
- 	char				*rcv_block_virt;				/* LLC host receive queue buf blk virt */
--	u32				rcv_block_phys;					/* LLC host receive queue buf blk phys */
-+	dma_addr_t			rcv_block_phys;					/* LLC host receive queue buf blk phys */
- 	PI_CONSUMER_BLOCK		*cons_block_virt;				/* PDQ consumer block virt address */
--	u32				cons_block_phys;				/* PDQ consumer block phys address */
-+	dma_addr_t			cons_block_phys;				/* PDQ consumer block phys address */
- 
- 	/* Keep local copies of Type 1 and Type 2 register data */
- 
-@@ -1758,8 +1761,9 @@
- 
- 	struct net_device		*dev;						/* pointer to device structure */
- 	struct net_device		*next;
--	u32				bus_type;					/* bus type (0 == PCI, 1 == EISA) */
--	u16				base_addr;					/* base I/O address (same as dev->base_addr) */
-+	u32				bus_type;					/* bus type (0 == PCI, 1 == EISA, 2 == TC) */
-+	long				base_addr;					/* base I/O address (same as dev->base_addr) */
-+	int				slot;						/* TC slot number */
- 	struct pci_dev *		pci_dev;
- 	u32				full_duplex_enb;				/* FDDI Full Duplex enable (1 == on, 2 == off) */
- 	u32				req_ttrt;					/* requested TTRT value (in 80ns units) */
-diff -Nur linux-2.4.32-rc1/drivers/net/hamradio/hdlcdrv.c linux-2.4.32-rc1.mips/drivers/net/hamradio/hdlcdrv.c
---- linux-2.4.32-rc1/drivers/net/hamradio/hdlcdrv.c	2002-02-25 20:37:59.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/net/hamradio/hdlcdrv.c	2004-05-04 14:04:27.000000000 +0200
-@@ -587,6 +587,8 @@
- 		return -EINVAL;
- 	s = (struct hdlcdrv_state *)dev->priv;
- 
-+	netif_stop_queue(dev);
-+
- 	if (s->ops && s->ops->close)
- 		i = s->ops->close(dev);
- 	if (s->skb)
-diff -Nur linux-2.4.32-rc1/drivers/net/irda/au1k_ir.c linux-2.4.32-rc1.mips/drivers/net/irda/au1k_ir.c
---- linux-2.4.32-rc1/drivers/net/irda/au1k_ir.c	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/net/irda/au1k_ir.c	2005-02-03 07:35:29.000000000 +0100
-@@ -81,10 +81,6 @@
- 
- #define RUN_AT(x) (jiffies + (x))
- 
--#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
--static BCSR * const bcsr = (BCSR *)0xAE000000;
--#endif
--
- static spinlock_t ir_lock = SPIN_LOCK_UNLOCKED;
- 
- /*
-diff -Nur linux-2.4.32-rc1/drivers/net/sgiseeq.c linux-2.4.32-rc1.mips/drivers/net/sgiseeq.c
---- linux-2.4.32-rc1/drivers/net/sgiseeq.c	2005-01-19 15:09:56.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/net/sgiseeq.c	2005-09-23 16:35:27.000000000 +0200
-@@ -24,16 +24,16 @@
- #include <asm/io.h>
- #include <asm/system.h>
- #include <asm/bitops.h>
-+#include <asm/paccess.h>
- #include <asm/page.h>
- #include <asm/pgtable.h>
-+#include <asm/sgi/mc.h>
- #include <asm/sgi/hpc3.h>
- #include <asm/sgi/ip22.h>
- #include <asm/sgialib.h>
- 
- #include "sgiseeq.h"
- 
--static char *version = "sgiseeq.c: David S. Miller (dm@engr.sgi.com)\n";
--
- static char *sgiseeqstr = "SGI Seeq8003";
- 
- /*
-@@ -113,9 +113,9 @@
- 
- static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs)
- {
--	hregs->rx_reset = HPC3_ERXRST_CRESET | HPC3_ERXRST_CLRIRQ;
-+	hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ;
- 	udelay(20);
--	hregs->rx_reset = 0;
-+	hregs->reset = 0;
- }
- 
- static inline void reset_hpc3_and_seeq(struct hpc3_ethregs *hregs,
-@@ -238,7 +238,6 @@
- 
- #define TSTAT_INIT_SEEQ (SEEQ_TCMD_IPT|SEEQ_TCMD_I16|SEEQ_TCMD_IC|SEEQ_TCMD_IUF)
- #define TSTAT_INIT_EDLC ((TSTAT_INIT_SEEQ) | SEEQ_TCMD_RB2)
--#define RDMACFG_INIT    (HPC3_ERXDCFG_FRXDC | HPC3_ERXDCFG_FEOP | HPC3_ERXDCFG_FIRQ)
- 
- static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp,
- 		     struct sgiseeq_regs *sregs)
-@@ -260,8 +259,6 @@
- 		sregs->tstat = TSTAT_INIT_SEEQ;
- 	}
- 
--	hregs->rx_dconfig |= RDMACFG_INIT;
--
- 	hregs->rx_ndptr = PHYSADDR(&sp->srings.rx_desc[0]);
- 	hregs->tx_ndptr = PHYSADDR(&sp->srings.tx_desc[0]);
- 
-@@ -432,7 +429,7 @@
- 	spin_lock(&sp->tx_lock);
- 
- 	/* Ack the IRQ and set software state. */
--	hregs->rx_reset = HPC3_ERXRST_CLRIRQ;
-+	hregs->reset = HPC3_ERST_CLRIRQ;
- 
- 	/* Always check for received packets. */
- 	sgiseeq_rx(dev, sp, hregs, sregs);
-@@ -616,7 +613,7 @@
- 
- #define ALIGNED(x)  ((((unsigned long)(x)) + 0xf) & ~(0xf))
- 
--int sgiseeq_init(struct hpc3_regs* regs, int irq)
-+int sgiseeq_init(struct hpc3_regs* hpcregs, int irq, int has_eeprom)
- {
- 	struct net_device *dev;
- 	struct sgiseeq_private *sp;
-@@ -629,7 +626,7 @@
- 		goto err_out;
- 	}
- 	/* Make private data page aligned */
--	sp = (struct sgiseeq_private *) get_zeroed_page(GFP_KERNEL); 	 
-+	sp = (struct sgiseeq_private *) get_zeroed_page(GFP_KERNEL);
- 	if (!sp) {
- 		printk(KERN_ERR "Sgiseeq: Page alloc failed, aborting.\n");
- 		err = -ENOMEM;
-@@ -644,7 +641,9 @@
- 
- #define EADDR_NVOFS     250
- 	for (i = 0; i < 3; i++) {
--		unsigned short tmp = ip22_nvram_read(EADDR_NVOFS / 2 + i);
-+		unsigned short tmp = has_eeprom ?
-+			ip22_eeprom_read(&hpcregs->eeprom, EADDR_NVOFS / 2+i) :
-+			ip22_nvram_read(EADDR_NVOFS / 2+i);
- 
- 		dev->dev_addr[2 * i]     = tmp >> 8;
- 		dev->dev_addr[2 * i + 1] = tmp & 0xff;
-@@ -654,8 +653,8 @@
- 	gpriv = sp;
- 	gdev = dev;
- #endif
--	sp->sregs = (struct sgiseeq_regs *) &hpc3c0->eth_ext[0];
--	sp->hregs = &hpc3c0->ethregs;
-+	sp->sregs = (struct sgiseeq_regs *) &hpcregs->eth_ext[0];
-+	sp->hregs = &hpcregs->ethregs;
- 	sp->name = sgiseeqstr;
- 	sp->mode = SEEQ_RCMD_RBCAST;
- 
-@@ -672,6 +671,11 @@
- 	setup_rx_ring(sp->srings.rx_desc, SEEQ_RX_BUFFERS);
- 	setup_tx_ring(sp->srings.tx_desc, SEEQ_TX_BUFFERS);
- 
-+	/* Setup PIO and DMA transfer timing */
-+	sp->hregs->pconfig = 0x161;
-+	sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP |
-+			     HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026;
-+
- 	/* Reset the chip. */
- 	hpc3_eth_reset(sp->hregs);
- 
-@@ -699,7 +703,7 @@
- 		goto err_out_free_irq;
- 	}
- 
--	printk(KERN_INFO "%s: SGI Seeq8003 ", dev->name);
-+	printk(KERN_INFO "%s: %s ", dev->name, sgiseeqstr);
- 	for (i = 0; i < 6; i++)
- 		printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
- 
-@@ -721,10 +725,22 @@
- 
- static int __init sgiseeq_probe(void)
- {
--	printk(version);
-+	unsigned int tmp, ret1, ret2 = 0;
- 
- 	/* On board adapter on 1st HPC is always present */
--	return sgiseeq_init(hpc3c0, SGI_ENET_IRQ);
-+	ret1 = sgiseeq_init(hpc3c0, SGI_ENET_IRQ, 0);
-+	/* Let's see if second HPC is there */
-+	if (!(ip22_is_fullhouse()) &&
-+	    get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]) == 0) {
-+		sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 |
-+				 SGIMC_GIOPAR_EXP164 |
-+				 SGIMC_GIOPAR_HPC264;
-+		hpc3c1->pbus_piocfg[0][0] = 0x3ffff;
-+		/* interrupt/config register on Challenge S Mezz board */
-+		hpc3c1->pbus_extregs[0][0] = 0x30;
-+		ret2 = sgiseeq_init(hpc3c1, SGI_GIO_0_IRQ, 1);
-+	}
-+	return (ret1 & ret2) ? ret1 : 0;
- }
- 
- static void __exit sgiseeq_exit(void)
-@@ -747,4 +763,6 @@
- module_init(sgiseeq_probe);
- module_exit(sgiseeq_exit);
- 
-+MODULE_DESCRIPTION("SGI Seeq 8003 driver");
-+MODULE_AUTHOR("David S. Miller");
- MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.32-rc1/drivers/pci/pci.c linux-2.4.32-rc1.mips/drivers/pci/pci.c
---- linux-2.4.32-rc1/drivers/pci/pci.c	2004-11-17 12:54:21.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/pci/pci.c	2004-11-19 01:28:41.000000000 +0100
-@@ -1281,11 +1281,17 @@
- {
- 	unsigned int buses;
- 	unsigned short cr;
-+	unsigned short bctl;
- 	struct pci_bus *child;
- 	int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
- 
- 	pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
- 	DBG("Scanning behind PCI bridge %s, config %06x, pass %d\n", dev->slot_name, buses & 0xffffff, pass);
-+	/* Disable MasterAbortMode during probing to avoid reporting
-+           of bus errors (in some architectures) */
-+	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
-+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, 
-+			      bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
- 	if ((buses & 0xffff00) && !pcibios_assign_all_busses()) {
- 		/*
- 		 * Bus already configured by firmware, process it in the first
-@@ -1351,6 +1357,7 @@
- 		pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
- 		pci_write_config_word(dev, PCI_COMMAND, cr);
- 	}
-+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
- 	sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number);
- 	return max;
- }
-diff -Nur linux-2.4.32-rc1/drivers/pcmcia/au1000_db1x00.c linux-2.4.32-rc1.mips/drivers/pcmcia/au1000_db1x00.c
---- linux-2.4.32-rc1/drivers/pcmcia/au1000_db1x00.c	2005-01-19 15:09:57.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/pcmcia/au1000_db1x00.c	2005-02-03 07:35:30.000000000 +0100
-@@ -1,6 +1,6 @@
- /*
-  *
-- * Alchemy Semi Db1x00 boards specific pcmcia routines.
-+ * AMD Alchemy DUAL-SLOT Db1x00 boards' specific pcmcia routines.
-  *
-  * Copyright 2002 MontaVista Software Inc.
-  * Author: MontaVista Software, Inc.
-@@ -54,9 +54,20 @@
- #include <asm/au1000.h>
- #include <asm/au1000_pcmcia.h>
- 
-+#if defined(CONFIG_MIPS_PB1200)
-+#include <asm/pb1200.h>
-+#elif defined(CONFIG_MIPS_DB1200)
-+#include <asm/db1200.h>
-+#else
- #include <asm/db1x00.h>
-+#endif
- 
--static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+#define PCMCIA_MAX_SOCK 1
-+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
-+
-+/* VPP/VCC */
-+#define SET_VCC_VPP(VCC, VPP, SLOT)\
-+    ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
- 
- static int db1x00_pcmcia_init(struct pcmcia_init *init)
- {
-@@ -76,7 +87,7 @@
- db1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
- {
- 	u32 inserted;
--	unsigned char vs;
-+	u16 vs;
- 
- 	if(sock > PCMCIA_MAX_SOCK) return -1;
- 
-@@ -87,11 +98,11 @@
- 
- 	if (sock == 0) {
- 		vs = bcsr->status & 0x3;
--		inserted = !(bcsr->status & (1<<4));
-+		inserted = BOARD_CARD_INSERTED(0);
- 	}
- 	else {
- 		vs = (bcsr->status & 0xC)>>2;
--		inserted = !(bcsr->status & (1<<5));
-+		inserted = BOARD_CARD_INSERTED(1);
- 	}
- 
- 	DEBUG(KERN_DEBUG "db1x00 socket %d: inserted %d, vs %d\n", 
-@@ -144,16 +155,9 @@
- 	if(info->sock > PCMCIA_MAX_SOCK) return -1;
- 
- 	if(info->sock == 0)
--#ifdef CONFIG_MIPS_DB1550
--		info->irq = AU1000_GPIO_3;
-+		info->irq = BOARD_PC0_INT;
- 	else 
--		info->irq = AU1000_GPIO_5;
--#else
--		info->irq = AU1000_GPIO_2;
--	else 
--		info->irq = AU1000_GPIO_5;
--#endif
--
-+		info->irq = BOARD_PC1_INT;
- 	return 0;
- }
- 
-diff -Nur linux-2.4.32-rc1/drivers/pcmcia/Config.in linux-2.4.32-rc1.mips/drivers/pcmcia/Config.in
---- linux-2.4.32-rc1/drivers/pcmcia/Config.in	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/pcmcia/Config.in	2004-02-22 06:21:34.000000000 +0100
-@@ -30,16 +30,14 @@
-       dep_tristate '  M8xx support' CONFIG_PCMCIA_M8XX $CONFIG_PCMCIA
-    fi
-    if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
--      dep_tristate '  Au1x00 PCMCIA support' CONFIG_PCMCIA_AU1X00 $CONFIG_PCMCIA 
--      if [ "$CONFIG_PCMCIA_AU1X00" != "n" ]; then
--        bool '  Pb1x00 board support' CONFIG_PCMCIA_PB1X00
--        bool '  Db1x00 board support' CONFIG_PCMCIA_DB1X00
--        bool '  XXS1500 board support' CONFIG_PCMCIA_XXS1500
--      fi
-+      dep_tristate '  Au1x00 PCMCIA support' CONFIG_PCMCIA_AU1X00 $CONFIG_PCMCIA
-    fi
-    if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
-       dep_bool '  SiByte PCMCIA support' CONFIG_PCMCIA_SIBYTE $CONFIG_PCMCIA $CONFIG_BLK_DEV_IDE_SIBYTE
-    fi
-+   if [ "$CONFIG_VRC4171" = "y" -o "$CONFIG_VRC4171" = "m" ]; then
-+      dep_tristate '  NEC VRC4171 Card Controllers support' CONFIG_PCMCIA_VRC4171 $CONFIG_PCMCIA
-+   fi
-    if [ "$CONFIG_VRC4173" = "y" -o "$CONFIG_VRC4173" = "m" ]; then
-       dep_tristate '  NEC VRC4173 CARDU support' CONFIG_PCMCIA_VRC4173 $CONFIG_PCMCIA
-    fi
-diff -Nur linux-2.4.32-rc1/drivers/pcmcia/Makefile linux-2.4.32-rc1.mips/drivers/pcmcia/Makefile
---- linux-2.4.32-rc1/drivers/pcmcia/Makefile	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/pcmcia/Makefile	2005-02-03 07:35:30.000000000 +0100
-@@ -61,9 +61,18 @@
- 
- obj-$(CONFIG_PCMCIA_AU1X00)			+= au1x00_ss.o
- au1000_ss-objs-y				:= au1000_generic.o
--au1000_ss-objs-$(CONFIG_PCMCIA_PB1X00)		+= au1000_pb1x00.o
--au1000_ss-objs-$(CONFIG_PCMCIA_DB1X00)		+= au1000_db1x00.o
--au1000_ss-objs-$(CONFIG_PCMCIA_XXS1500) 	+= au1000_xxs1500.o
-+au1000_ss-objs-$(CONFIG_MIPS_PB1000)		+= au1000_pb1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_PB1100)		+= au1000_pb1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_PB1500)		+= au1000_pb1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_PB1550)		+= au1000_pb1550.o
-+au1000_ss-objs-$(CONFIG_MIPS_PB1200)		+= au1000_db1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_DB1000)		+= au1000_db1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_DB1100)		+= au1000_db1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_DB1500)		+= au1000_db1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_DB1550)		+= au1000_db1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_DB1200)		+= au1000_db1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_HYDROGEN3)		+= au1000_hydrogen3.o
-+au1000_ss-objs-$(CONFIG_MIPS_XXS1500) 		+= au1000_xxs1500.o
- 
- obj-$(CONFIG_PCMCIA_SA1100)	+= sa1100_cs.o
- obj-$(CONFIG_PCMCIA_M8XX)	+= m8xx_pcmcia.o
-@@ -89,6 +98,7 @@
- sa1100_cs-objs-$(CONFIG_SA1100_XP860)		+= sa1100_xp860.o sa1111_generic.o
- sa1100_cs-objs-$(CONFIG_SA1100_YOPY)		+= sa1100_yopy.o
- 
-+obj-$(CONFIG_PCMCIA_VRC4171)	+= vrc4171_card.o
- obj-$(CONFIG_PCMCIA_VRC4173)	+= vrc4173_cardu.o
- 
- include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.32-rc1/drivers/pcmcia/vrc4171_card.c linux-2.4.32-rc1.mips/drivers/pcmcia/vrc4171_card.c
---- linux-2.4.32-rc1/drivers/pcmcia/vrc4171_card.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/pcmcia/vrc4171_card.c	2004-01-19 16:54:58.000000000 +0100
-@@ -0,0 +1,886 @@
-+/*
-+ * vrc4171_card.c, NEC VRC4171 Card Controller driver for Socket Services.
-+ *
-+ * Copyright (C) 2003  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+
-+#include <asm/io.h>
-+#include <asm/vr41xx/vrc4171.h>
-+
-+#include <pcmcia/ss.h>
-+
-+#include "i82365.h"
-+
-+MODULE_DESCRIPTION("NEC VRC4171 Card Controllers driver for Socket Services");
-+MODULE_AUTHOR("Yoichi Yuasa <yuasa@hh.iij4u.or.jp>");
-+MODULE_LICENSE("GPL");
-+
-+#define CARD_MAX_SLOTS		2
-+#define CARD_SLOTA		0
-+#define CARD_SLOTB		1
-+#define CARD_SLOTB_OFFSET	0x40
-+
-+#define CARD_MEM_START		0x10000000
-+#define CARD_MEM_END		0x13ffffff
-+#define CARD_MAX_MEM_OFFSET	0x3ffffff
-+#define CARD_MAX_MEM_SPEED	1000
-+
-+#define CARD_CONTROLLER_INDEX	0x03e0
-+#define CARD_CONTROLLER_DATA	0x03e1
-+#define CARD_CONTROLLER_SIZE	2
-+ /* Power register */
-+  #define VPP_GET_VCC		0x01
-+  #define POWER_ENABLE		0x10
-+ #define CARD_VOLTAGE_SENSE	0x1f
-+  #define VCC_3VORXV_CAPABLE	0x00
-+  #define VCC_XV_ONLY		0x01
-+  #define VCC_3V_CAPABLE	0x02
-+  #define VCC_5V_ONLY		0x03
-+ #define CARD_VOLTAGE_SELECT	0x2f
-+  #define VCC_3V		0x01
-+  #define VCC_5V		0x00
-+  #define VCC_XV		0x02
-+  #define VCC_STATUS_3V		0x02
-+  #define VCC_STATUS_5V		0x01
-+  #define VCC_STATUS_XV		0x03
-+ #define GLOBAL_CONTROL		0x1e
-+  #define EXWRBK		0x04
-+  #define IRQPM_EN		0x08
-+  #define CLRPMIRQ		0x10
-+
-+#define IO_MAX_MAPS	2
-+#define MEM_MAX_MAPS	5
-+
-+enum {
-+	SLOTB_PROBE = 0,
-+	SLOTB_NOPROBE_IO,
-+	SLOTB_NOPROBE_MEM,
-+	SLOTB_NOPROBE_ALL
-+};
-+
-+typedef struct vrc4171_socket {
-+	int noprobe;
-+	void (*handler)(void *, unsigned int);
-+	void *info;
-+	socket_cap_t cap;
-+	spinlock_t event_lock;
-+	uint16_t events;
-+	struct socket_info_t *pcmcia_socket;
-+	struct tq_struct tq_task;
-+	char name[24];
-+	int csc_irq;
-+	int io_irq;
-+} vrc4171_socket_t;
-+
-+static vrc4171_socket_t vrc4171_sockets[CARD_MAX_SLOTS];
-+static int vrc4171_slotb = SLOTB_IS_NONE;
-+static unsigned int vrc4171_irq;
-+static uint16_t vrc4171_irq_mask = 0xdeb8;
-+
-+extern struct socket_info_t *pcmcia_register_socket(int slot,
-+                                                    struct pccard_operations *vtable,
-+                                                    int use_bus_pm);
-+extern void pcmcia_unregister_socket(struct socket_info_t *s);
-+
-+static inline uint8_t exca_read_byte(int slot, uint8_t index)
-+{
-+	if (slot == CARD_SLOTB)
-+		index += CARD_SLOTB_OFFSET;
-+
-+	outb(index, CARD_CONTROLLER_INDEX);
-+	return inb(CARD_CONTROLLER_DATA);
-+}
-+
-+static inline uint16_t exca_read_word(int slot, uint8_t index)
-+{
-+	uint16_t data;
-+
-+	if (slot == CARD_SLOTB)
-+		index += CARD_SLOTB_OFFSET;
-+
-+	outb(index++, CARD_CONTROLLER_INDEX);
-+	data = inb(CARD_CONTROLLER_DATA);
-+
-+	outb(index, CARD_CONTROLLER_INDEX);
-+	data |= ((uint16_t)inb(CARD_CONTROLLER_DATA)) << 8;
-+
-+	return data;
-+}
-+
-+static inline uint8_t exca_write_byte(int slot, uint8_t index, uint8_t data)
-+{
-+	if (slot == CARD_SLOTB)
-+		index += CARD_SLOTB_OFFSET;
-+
-+	outb(index, CARD_CONTROLLER_INDEX);
-+	outb(data, CARD_CONTROLLER_DATA);
-+
-+	return data;
-+}
-+
-+static inline uint16_t exca_write_word(int slot, uint8_t index, uint16_t data)
-+{
-+	if (slot == CARD_SLOTB)
-+		index += CARD_SLOTB_OFFSET;
-+
-+	outb(index++, CARD_CONTROLLER_INDEX);
-+	outb(data, CARD_CONTROLLER_DATA);
-+
-+	outb(index, CARD_CONTROLLER_INDEX);
-+	outb((uint8_t)(data >> 8), CARD_CONTROLLER_DATA);
-+
-+	return data;
-+}
-+
-+static inline int search_nonuse_irq(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < 16; i++) {
-+		if (vrc4171_irq_mask & (1 << i)) {
-+			vrc4171_irq_mask &= ~(1 << i);
-+			return i;
-+		}
-+	}
-+
-+	return -1;
-+}
-+
-+static int pccard_init(unsigned int slot)
-+{
-+	vrc4171_socket_t *socket = &vrc4171_sockets[slot];
-+
-+	socket->cap.features |= SS_CAP_PCCARD | SS_CAP_PAGE_REGS;
-+	socket->cap.irq_mask = 0;
-+	socket->cap.pci_irq = vrc4171_irq;
-+	socket->cap.map_size = 0x1000;
-+	socket->events = 0;
-+	spin_lock_init(socket->event_lock);
-+	socket->csc_irq = search_nonuse_irq();
-+	socket->io_irq = search_nonuse_irq();
-+
-+	return 0;
-+}
-+
-+static int pccard_suspend(unsigned int slot)
-+{
-+	return -EINVAL;
-+}
-+
-+static int pccard_register_callback(unsigned int slot,
-+                                    void (*handler)(void *, unsigned int),
-+                                    void *info)
-+{
-+	vrc4171_socket_t *socket;
-+
-+	if (slot >= CARD_MAX_SLOTS)
-+		return -EINVAL;
-+
-+	socket = &vrc4171_sockets[slot];
-+
-+	socket->handler = handler;
-+	socket->info = info;
-+
-+	if (handler)
-+		MOD_INC_USE_COUNT;
-+	else
-+		MOD_DEC_USE_COUNT;
-+
-+	return 0;
-+}
-+
-+static int pccard_inquire_socket(unsigned int slot, socket_cap_t *cap)
-+{
-+	vrc4171_socket_t *socket;
-+
-+	if (slot >= CARD_MAX_SLOTS || cap == NULL)
-+		return -EINVAL;
-+
-+	socket = &vrc4171_sockets[slot];
-+
-+	*cap = socket->cap;
-+
-+	return 0;
-+}
-+
-+static int pccard_get_status(unsigned int slot, u_int *value)
-+{
-+	uint8_t status, sense;
-+	u_int val = 0;
-+
-+	if (slot >= CARD_MAX_SLOTS || value == NULL)
-+		return -EINVAL;
-+
-+	status = exca_read_byte(slot, I365_STATUS);
-+	if (exca_read_byte(slot, I365_INTCTL) & I365_PC_IOCARD) {
-+		if (status & I365_CS_STSCHG)
-+			val |= SS_STSCHG;
-+	} else {
-+		if (!(status & I365_CS_BVD1))
-+			val |= SS_BATDEAD;
-+		else if ((status & (I365_CS_BVD1 | I365_CS_BVD2)) == I365_CS_BVD1)
-+			val |= SS_BATWARN;
-+	}
-+	if ((status & I365_CS_DETECT) == I365_CS_DETECT)
-+		val |= SS_DETECT;
-+	if (status & I365_CS_WRPROT)
-+		val |= SS_WRPROT;
-+	if (status & I365_CS_READY)
-+		val |= SS_READY;
-+	if (status & I365_CS_POWERON)
-+		val |= SS_POWERON;
-+
-+	sense = exca_read_byte(slot, CARD_VOLTAGE_SENSE);
-+	switch (sense) {
-+	case VCC_3VORXV_CAPABLE:
-+		val |= SS_3VCARD | SS_XVCARD;
-+		break;
-+	case VCC_XV_ONLY:
-+		val |= SS_XVCARD;
-+		break;
-+	case VCC_3V_CAPABLE:
-+		val |= SS_3VCARD;
-+		break;
-+	default:
-+		/* 5V only */
-+		break;
-+	}
-+
-+	*value = val;
-+
-+	return 0;
-+}
-+
-+static inline u_char get_Vcc_value(uint8_t voltage)
-+{
-+	switch (voltage) {
-+	case VCC_STATUS_3V:
-+		return 33;
-+	case VCC_STATUS_5V:
-+		return 50;
-+	default:
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+static inline u_char get_Vpp_value(uint8_t power, u_char Vcc)
-+{
-+	if ((power & 0x03) == 0x01 || (power & 0x03) == 0x02)
-+		return Vcc;
-+
-+	return 0;
-+}
-+
-+static int pccard_get_socket(unsigned int slot, socket_state_t *state)
-+{
-+	vrc4171_socket_t *socket;
-+	uint8_t power, voltage, control, cscint;
-+
-+	if (slot >= CARD_MAX_SLOTS || state == NULL)
-+		return -EINVAL;
-+
-+	socket = &vrc4171_sockets[slot];
-+
-+	power = exca_read_byte(slot, I365_POWER);
-+	voltage = exca_read_byte(slot, CARD_VOLTAGE_SELECT);
-+
-+	state->Vcc = get_Vcc_value(voltage);
-+	state->Vpp = get_Vpp_value(power, state->Vcc);
-+
-+	state->flags = 0;
-+	if (power & POWER_ENABLE)
-+		state->flags |= SS_PWR_AUTO;
-+	if (power & I365_PWR_OUT)
-+		state->flags |= SS_OUTPUT_ENA;
-+
-+	control = exca_read_byte(slot, I365_INTCTL);
-+	if (control & I365_PC_IOCARD)
-+		state->flags |= SS_IOCARD;
-+	if (!(control & I365_PC_RESET))
-+		state->flags |= SS_RESET;
-+
-+        cscint = exca_read_byte(slot, I365_CSCINT);
-+	state->csc_mask = 0;
-+	if (state->flags & SS_IOCARD) {
-+		if (cscint & I365_CSC_STSCHG)
-+			state->flags |= SS_STSCHG;
-+	} else {
-+		if (cscint & I365_CSC_BVD1)  
-+			state->csc_mask |= SS_BATDEAD;
-+		if (cscint & I365_CSC_BVD2)  
-+			state->csc_mask |= SS_BATWARN;
-+	}
-+	if (cscint & I365_CSC_READY)
-+		state->csc_mask |= SS_READY;
-+	if (cscint & I365_CSC_DETECT)
-+		state->csc_mask |= SS_DETECT;
-+
-+	return 0;
-+}
-+
-+static inline uint8_t set_Vcc_value(u_char Vcc)
-+{
-+	switch (Vcc) {
-+	case 33:
-+		return VCC_3V;
-+	case 50:
-+		return VCC_5V;
-+	}
-+
-+	/* Small voltage is chosen for safety. */
-+	return VCC_3V;
-+}
-+
-+static int pccard_set_socket(unsigned int slot, socket_state_t *state)
-+{
-+	vrc4171_socket_t *socket;
-+	uint8_t voltage, power, control, cscint;
-+
-+	if (slot >= CARD_MAX_SLOTS ||
-+	    (state->Vpp != state->Vcc && state->Vpp != 0) ||
-+	    (state->Vcc != 50 && state->Vcc != 33 && state->Vcc != 0))
-+		return -EINVAL;
-+
-+	socket = &vrc4171_sockets[slot];
-+
-+	spin_lock_irq(&socket->event_lock);
-+
-+	voltage = set_Vcc_value(state->Vcc);
-+	exca_write_byte(slot, CARD_VOLTAGE_SELECT, voltage);
-+
-+	power = POWER_ENABLE;
-+	if (state->Vpp == state->Vcc)
-+		power |= VPP_GET_VCC;
-+	if (state->flags & SS_OUTPUT_ENA)
-+		power |= I365_PWR_OUT;
-+	exca_write_byte(slot, I365_POWER, power);
-+
-+	control = 0;
-+	if (state->io_irq != 0)
-+		control |= socket->io_irq;
-+	if (state->flags & SS_IOCARD)
-+		control |= I365_PC_IOCARD;
-+	if (state->flags & SS_RESET)
-+		control	&= ~I365_PC_RESET;
-+	else
-+		control |= I365_PC_RESET;
-+	exca_write_byte(slot, I365_INTCTL, control);
-+
-+        cscint = 0;
-+        exca_write_byte(slot, I365_CSCINT, cscint);
-+	exca_read_byte(slot, I365_CSC);	/* clear CardStatus change */
-+	if (state->csc_mask != 0)
-+		cscint |= socket->csc_irq << 8;
-+	if (state->flags & SS_IOCARD) {
-+		if (state->csc_mask & SS_STSCHG)
-+			cscint |= I365_CSC_STSCHG;
-+	} else {
-+		if (state->csc_mask & SS_BATDEAD)
-+			cscint |= I365_CSC_BVD1;
-+		if (state->csc_mask & SS_BATWARN)
-+			cscint |= I365_CSC_BVD2;
-+	}
-+	if (state->csc_mask & SS_READY)
-+		cscint |= I365_CSC_READY;
-+	if (state->csc_mask & SS_DETECT)
-+		cscint |= I365_CSC_DETECT;
-+        exca_write_byte(slot, I365_CSCINT, cscint);
-+
-+	spin_unlock_irq(&socket->event_lock);
-+
-+	return 0;
-+}
-+
-+static int pccard_get_io_map(unsigned int slot, struct pccard_io_map *io)
-+{
-+	vrc4171_socket_t *socket;
-+	uint8_t ioctl, addrwin;
-+	u_char map;
-+
-+	if (slot >= CARD_MAX_SLOTS || io == NULL ||
-+	    io->map >= IO_MAX_MAPS)
-+		return -EINVAL;
-+
-+	socket = &vrc4171_sockets[slot];
-+	map = io->map;
-+
-+	io->start = exca_read_word(slot, I365_IO(map)+I365_W_START);
-+	io->stop = exca_read_word(slot, I365_IO(map)+I365_W_STOP);
-+
-+	ioctl = exca_read_byte(slot, I365_IOCTL);
-+	if (io->flags & I365_IOCTL_WAIT(map))
-+		io->speed = 1;
-+	else
-+		io->speed = 0;
-+
-+	io->flags = 0;
-+	if (ioctl & I365_IOCTL_16BIT(map))
-+		io->flags |= MAP_16BIT;
-+	if (ioctl & I365_IOCTL_IOCS16(map))
-+		io->flags |= MAP_AUTOSZ;
-+	if (ioctl & I365_IOCTL_0WS(map))
-+		io->flags |= MAP_0WS;
-+
-+	addrwin = exca_read_byte(slot, I365_ADDRWIN);
-+	if (addrwin & I365_ENA_IO(map))
-+		io->flags |= MAP_ACTIVE;
-+
-+	return 0;
-+}
-+
-+static int pccard_set_io_map(unsigned int slot, struct pccard_io_map *io)
-+{
-+	vrc4171_socket_t *socket;
-+	uint8_t ioctl, addrwin;
-+	u_char map;
-+
-+	if (slot >= CARD_MAX_SLOTS ||
-+	    io == NULL || io->map >= IO_MAX_MAPS ||
-+	    io->start > 0xffff || io->stop > 0xffff || io->start > io->stop)
-+		return -EINVAL;
-+
-+	socket = &vrc4171_sockets[slot];
-+	map = io->map;
-+
-+	addrwin = exca_read_byte(slot, I365_ADDRWIN);
-+	if (addrwin & I365_ENA_IO(map)) {
-+		addrwin &= ~I365_ENA_IO(map);
-+		exca_write_byte(slot, I365_ADDRWIN, addrwin);
-+	}
-+
-+	exca_write_word(slot, I365_IO(map)+I365_W_START, io->start);
-+	exca_write_word(slot, I365_IO(map)+I365_W_STOP, io->stop);
-+
-+	ioctl = 0;
-+	if (io->speed > 0)
-+		ioctl |= I365_IOCTL_WAIT(map);
-+	if (io->flags & MAP_16BIT)
-+		ioctl |= I365_IOCTL_16BIT(map);
-+	if (io->flags & MAP_AUTOSZ)
-+		ioctl |= I365_IOCTL_IOCS16(map);
-+	if (io->flags & MAP_0WS)
-+		ioctl |= I365_IOCTL_0WS(map);
-+	exca_write_byte(slot, I365_IOCTL, ioctl);
-+
-+	if (io->flags & MAP_ACTIVE) {
-+		addrwin |= I365_ENA_IO(map);
-+		exca_write_byte(slot, I365_ADDRWIN, addrwin);
-+	}
-+
-+	return 0;
-+}
-+
-+static int pccard_get_mem_map(unsigned int slot, struct pccard_mem_map *mem)
-+{
-+	vrc4171_socket_t *socket;
-+	uint8_t addrwin;
-+	u_long start, stop;
-+	u_int offset;
-+	u_char map;
-+
-+	if (slot >= CARD_MAX_SLOTS || mem == NULL || mem->map >= MEM_MAX_MAPS)
-+		return -EINVAL;
-+
-+	socket = &vrc4171_sockets[slot];
-+	map = mem->map;
-+
-+	mem->flags = 0;
-+	mem->speed = 0;
-+
-+	addrwin = exca_read_byte(slot, I365_ADDRWIN);
-+	if (addrwin & I365_ENA_MEM(map))
-+		mem->flags |= MAP_ACTIVE;
-+
-+	start = exca_read_word(slot, I365_MEM(map)+I365_W_START);
-+	if (start & I365_MEM_16BIT)
-+		mem->flags |= MAP_16BIT;
-+	mem->sys_start = (start & 0x3fffUL) << 12;
-+
-+	stop = exca_read_word(slot, I365_MEM(map)+I365_W_STOP);
-+	if (start & I365_MEM_WS0)
-+		mem->speed += 1;
-+	if (start & I365_MEM_WS1)
-+		mem->speed += 2;
-+	mem->sys_stop = ((stop & 0x3fffUL) << 12) + 0xfffUL;
-+
-+	offset = exca_read_word(slot, I365_MEM(map)+I365_W_OFF);
-+	if (offset & I365_MEM_REG)
-+		mem->flags |= MAP_ATTRIB;
-+	if (offset & I365_MEM_WRPROT)
-+		mem->flags |= MAP_WRPROT;
-+	mem->card_start = (offset & 0x3fffUL) << 12;
-+
-+	mem->sys_start += CARD_MEM_START;
-+	mem->sys_stop += CARD_MEM_START;
-+
-+	return 0;
-+}
-+
-+static int pccard_set_mem_map(unsigned int slot, struct pccard_mem_map *mem)
-+{
-+	vrc4171_socket_t *socket;
-+	uint16_t start, stop, offset;
-+	uint8_t addrwin;
-+	u_char map;
-+
-+	if (slot >= CARD_MAX_SLOTS ||
-+	    mem == NULL || mem->map >= MEM_MAX_MAPS ||
-+	    mem->sys_start < CARD_MEM_START || mem->sys_start > CARD_MEM_END ||
-+	    mem->sys_stop < CARD_MEM_START || mem->sys_stop > CARD_MEM_END ||
-+	    mem->sys_start > mem->sys_stop ||
-+	    mem->card_start > CARD_MAX_MEM_OFFSET ||
-+	    mem->speed > CARD_MAX_MEM_SPEED)
-+		return -EINVAL;
-+
-+	socket = &vrc4171_sockets[slot];
-+	map = mem->map;
-+
-+	addrwin = exca_read_byte(slot, I365_ADDRWIN);
-+	if (addrwin & I365_ENA_MEM(map)) {
-+		addrwin &= ~I365_ENA_MEM(map);
-+		exca_write_byte(slot, I365_ADDRWIN, addrwin);
-+	}
-+
-+	start = (mem->sys_start >> 12) & 0x3fff;
-+	if (mem->flags & MAP_16BIT)
-+		start |= I365_MEM_16BIT;
-+	exca_write_word(slot, I365_MEM(map)+I365_W_START, start);
-+
-+	stop = (mem->sys_stop >> 12) & 0x3fff;
-+	switch (mem->speed) {
-+	case 0:
-+		break;
-+	case 1:
-+		stop |= I365_MEM_WS0;
-+		break;
-+	case 2:
-+		stop |= I365_MEM_WS1;
-+		break;
-+	default:
-+		stop |= I365_MEM_WS0 | I365_MEM_WS1;
-+		break;
-+	}
-+	exca_write_word(slot, I365_MEM(map)+I365_W_STOP, stop);
-+
-+	offset = (mem->card_start >> 12) & 0x3fff;
-+	if (mem->flags & MAP_ATTRIB)
-+		offset |= I365_MEM_REG;
-+	if (mem->flags & MAP_WRPROT)
-+		offset |= I365_MEM_WRPROT;
-+	exca_write_word(slot, I365_MEM(map)+I365_W_OFF, offset);
-+
-+	if (mem->flags & MAP_ACTIVE) {
-+		addrwin |= I365_ENA_MEM(map);
-+		exca_write_byte(slot, I365_ADDRWIN, addrwin);
-+	}
-+
-+	return 0;
-+}
-+
-+static void pccard_proc_setup(unsigned int slot, struct proc_dir_entry *base)
-+{          
-+}
-+
-+static struct pccard_operations vrc4171_pccard_operations = {
-+	.init			= pccard_init,
-+	.suspend		= pccard_suspend,
-+	.register_callback	= pccard_register_callback,
-+	.inquire_socket		= pccard_inquire_socket,
-+	.get_status		= pccard_get_status,
-+	.get_socket		= pccard_get_socket,
-+	.set_socket		= pccard_set_socket,
-+	.get_io_map		= pccard_get_io_map,
-+	.set_io_map		= pccard_set_io_map,
-+	.get_mem_map		= pccard_get_mem_map,
-+	.set_mem_map		= pccard_set_mem_map,
-+	.proc_setup		= pccard_proc_setup,
-+};
-+
-+static void pccard_bh(void *data)
-+{
-+	vrc4171_socket_t *socket = (vrc4171_socket_t *)data;
-+	uint16_t events;
-+
-+	spin_lock_irq(&socket->event_lock);
-+	events = socket->events;
-+	socket->events = 0;
-+	spin_unlock_irq(&socket->event_lock);
-+ 
-+	if (socket->handler)
-+		socket->handler(socket->info, events);
-+}
-+
-+static inline uint16_t get_events(int slot)
-+{
-+	uint16_t events = 0;
-+	uint8_t status, csc;
-+
-+	status = exca_read_byte(slot, I365_STATUS);
-+	csc = exca_read_byte(slot, I365_CSC);
-+
-+	if (exca_read_byte(slot, I365_INTCTL) & I365_PC_IOCARD) {
-+		if ((csc & I365_CSC_STSCHG) && (status & I365_CS_STSCHG))
-+			events |= SS_STSCHG;
-+	} else {
-+		if (csc & (I365_CSC_BVD1 | I365_CSC_BVD2)) {
-+			if (!(status & I365_CS_BVD1))
-+				events |= SS_BATDEAD;
-+			else if ((status & (I365_CS_BVD1 | I365_CS_BVD2)) == I365_CS_BVD1)
-+				events |= SS_BATWARN;
-+		}
-+	}
-+	if ((csc & I365_CSC_READY) && (status & I365_CS_READY))
-+		events |= SS_READY;
-+	if ((csc & I365_CSC_DETECT) && ((status & I365_CS_DETECT) == I365_CS_DETECT))
-+		events |= SS_DETECT;
-+
-+	return events;
-+}
-+
-+static void pccard_status_change(int slot, vrc4171_socket_t *socket)
-+{
-+	uint16_t events;
-+
-+	socket->tq_task.routine = pccard_bh;
-+	socket->tq_task.data = socket;
-+
-+	events = get_events(slot);
-+	if (events) {
-+		spin_lock(&socket->event_lock);
-+		socket->events |= events;
-+		spin_unlock(&socket->event_lock);
-+		schedule_task(&socket->tq_task);
-+	}
-+}
-+
-+static void pccard_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	vrc4171_socket_t *socket;
-+	uint16_t status;
-+
-+	status = vrc4171_get_irq_status();
-+	if (status & IRQ_A) {
-+		socket = &vrc4171_sockets[CARD_SLOTA];
-+		if (socket->noprobe == SLOTB_PROBE) {
-+			if (status & (1 << socket->csc_irq))
-+				pccard_status_change(CARD_SLOTA, socket);
-+		}
-+	}
-+
-+	if (status & IRQ_B) {
-+		socket = &vrc4171_sockets[CARD_SLOTB];
-+		if (socket->noprobe == SLOTB_PROBE) {
-+			if (status & (1 << socket->csc_irq))
-+				pccard_status_change(CARD_SLOTB, socket);
-+		}
-+	}
-+}
-+
-+static inline void reserve_using_irq(int slot)
-+{
-+	unsigned int irq;
-+
-+	irq = exca_read_byte(slot, I365_INTCTL);
-+	irq &= 0x0f;
-+	vrc4171_irq_mask &= ~(1 << irq);
-+
-+	irq = exca_read_byte(slot, I365_CSCINT);
-+	irq = (irq & 0xf0) >> 4;
-+	vrc4171_irq_mask &= ~(1 << irq);
-+}
-+
-+static int __devinit vrc4171_add_socket(int slot)
-+{
-+	vrc4171_socket_t *socket;
-+
-+	if (slot >= CARD_MAX_SLOTS)
-+		return -EINVAL;
-+
-+	socket = &vrc4171_sockets[slot];
-+	if (socket->noprobe != SLOTB_PROBE) {
-+		uint8_t addrwin;
-+
-+		switch (socket->noprobe) {
-+		case SLOTB_NOPROBE_MEM:
-+			addrwin = exca_read_byte(slot, I365_ADDRWIN);
-+			addrwin &= 0x1f;
-+			exca_write_byte(slot, I365_ADDRWIN, addrwin);
-+			break;
-+		case SLOTB_NOPROBE_IO:
-+			addrwin = exca_read_byte(slot, I365_ADDRWIN);
-+			addrwin &= 0xc0;
-+			exca_write_byte(slot, I365_ADDRWIN, addrwin);
-+			break;
-+		default:
-+			break;
-+		}
-+
-+		reserve_using_irq(slot);
-+
-+		return 0;
-+	}
-+
-+	sprintf(socket->name, "NEC VRC4171 Card Slot %1c", 'A' + slot);
-+
-+	socket->pcmcia_socket = pcmcia_register_socket(slot, &vrc4171_pccard_operations, 1);
-+	if (socket->pcmcia_socket == NULL)
-+		return -ENOMEM;
-+
-+	exca_write_byte(slot, I365_ADDRWIN, 0);
-+
-+	exca_write_byte(slot, GLOBAL_CONTROL, 0);
-+
-+	return 0;
-+}
-+
-+static void vrc4171_remove_socket(int slot)
-+{
-+	vrc4171_socket_t *socket;
-+
-+	if (slot >= CARD_MAX_SLOTS)
-+		return;
-+
-+	socket = &vrc4171_sockets[slot];
-+
-+	if (socket->pcmcia_socket != NULL) {
-+		pcmcia_unregister_socket(socket->pcmcia_socket);
-+		socket->pcmcia_socket = NULL;
-+	}
-+}
-+
-+static int __devinit vrc4171_card_setup(char *options)
-+{
-+	if (options == NULL || *options == '\0')
-+		return 0;
-+
-+	if (strncmp(options, "irq:", 4) == 0) {
-+		int irq;
-+		options += 4;
-+		irq = simple_strtoul(options, &options, 0);
-+		if (irq >= 0 && irq < NR_IRQS)
-+			vrc4171_irq = irq;
-+
-+		if (*options != ',')
-+			return 0;
-+		options++;
-+	}
-+
-+	if (strncmp(options, "slota:", 6) == 0) {
-+		options += 6;
-+		if (*options != '\0') {
-+			if (strncmp(options, "noprobe", 7) == 0) {
-+				vrc4171_sockets[CARD_SLOTA].noprobe = 1;
-+				options += 7;
-+			}
-+
-+			if (*options != ',')
-+				return 0;
-+			options++;
-+		} else
-+			return 0;
-+
-+	}
-+
-+	if (strncmp(options, "slotb:", 6) == 0) {
-+		options += 6;
-+		if (*options != '\0') {
-+			if (strncmp(options, "pccard", 6) == 0) {
-+				vrc4171_slotb = SLOTB_IS_PCCARD;
-+				options += 6;
-+			} else if (strncmp(options, "cf", 2) == 0) {
-+				vrc4171_slotb = SLOTB_IS_CF;
-+				options += 2;
-+			} else if (strncmp(options, "flashrom", 8) == 0) {
-+				vrc4171_slotb = SLOTB_IS_FLASHROM;
-+				options += 8;
-+			} else if (strncmp(options, "none", 4) == 0) {
-+				vrc4171_slotb = SLOTB_IS_NONE;
-+				options += 4;
-+			}
-+
-+			if (*options != ',')
-+				return 0;
-+			options++;
-+
-+			if ( strncmp(options, "memnoprobe", 10) == 0)
-+				vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_MEM;
-+			if ( strncmp(options, "ionoprobe", 9) == 0)
-+				vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_IO;
-+			if ( strncmp(options, "noprobe", 7) == 0)
-+				vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_ALL;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+__setup("vrc4171_card=", vrc4171_card_setup);
-+
-+static int __devinit vrc4171_card_init(void)
-+{
-+	int retval, slot;
-+
-+	vrc4171_set_multifunction_pin(vrc4171_slotb);
-+
-+	if (request_region(CARD_CONTROLLER_INDEX, CARD_CONTROLLER_SIZE,
-+	                       "NEC VRC4171 Card Controller") == NULL)
-+		return -EBUSY;
-+
-+	for (slot = 0; slot < CARD_MAX_SLOTS; slot++) {
-+		if (slot == CARD_SLOTB && vrc4171_slotb == SLOTB_IS_NONE)
-+			break;
-+
-+		retval = vrc4171_add_socket(slot);
-+		if (retval != 0)
-+			return retval;
-+	}
-+
-+	retval = request_irq(vrc4171_irq, pccard_interrupt, SA_SHIRQ,
-+	                     "NEC VRC4171 Card Controller", vrc4171_sockets);
-+	if (retval < 0) {
-+		for (slot = 0; slot < CARD_MAX_SLOTS; slot++)
-+			vrc4171_remove_socket(slot);
-+
-+		return retval;
-+	}
-+
-+	printk(KERN_INFO "NEC VRC4171 Card Controller, connected to IRQ %d\n", vrc4171_irq);
-+
-+	return 0;
-+}
-+
-+static void __devexit vrc4171_card_exit(void)
-+{
-+	int slot;
-+
-+	for (slot = 0; slot < CARD_MAX_SLOTS; slot++)
-+		vrc4171_remove_socket(slot);
-+
-+	release_region(CARD_CONTROLLER_INDEX, CARD_CONTROLLER_SIZE);
-+}
-+
-+module_init(vrc4171_card_init);
-+module_exit(vrc4171_card_exit);
-diff -Nur linux-2.4.32-rc1/drivers/scsi/NCR53C9x.h linux-2.4.32-rc1.mips/drivers/scsi/NCR53C9x.h
---- linux-2.4.32-rc1/drivers/scsi/NCR53C9x.h	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/scsi/NCR53C9x.h	2003-12-15 19:19:51.000000000 +0100
-@@ -144,12 +144,7 @@
- 
- #ifndef MULTIPLE_PAD_SIZES
- 
--#ifdef CONFIG_CPU_HAS_WB
--#include <asm/wbflush.h>
--#define esp_write(__reg, __val) do{(__reg) = (__val); wbflush();} while(0)
--#else
--#define esp_write(__reg, __val) ((__reg) = (__val))
--#endif
-+#define esp_write(__reg, __val) do{(__reg) = (__val); iob();} while(0)
- #define esp_read(__reg) (__reg)
- 
- struct ESP_regs {
-diff -Nur linux-2.4.32-rc1/drivers/sound/au1550_i2s.c linux-2.4.32-rc1.mips/drivers/sound/au1550_i2s.c
---- linux-2.4.32-rc1/drivers/sound/au1550_i2s.c	2005-01-19 15:10:04.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/sound/au1550_i2s.c	2005-02-08 08:07:50.000000000 +0100
-@@ -41,6 +41,7 @@
-  *  675 Mass Ave, Cambridge, MA 02139, USA.
-  *
-  */
-+
- #include <linux/version.h>
- #include <linux/module.h>
- #include <linux/string.h>
-@@ -62,7 +63,45 @@
- #include <asm/uaccess.h>
- #include <asm/hardirq.h>
- #include <asm/au1000.h>
-+
-+#if defined(CONFIG_SOC_AU1550)
- #include <asm/pb1550.h>
-+#endif
-+
-+#if defined(CONFIG_MIPS_PB1200)
-+#define WM8731
-+#define WM_MODE_USB
-+#include <asm/pb1200.h>
-+#endif
-+
-+#if defined(CONFIG_MIPS_FICMMP)
-+#define WM8721
-+#define WM_MODE_NORMAL
-+#include <asm/ficmmp.h>
-+#endif
-+
-+
-+#define WM_VOLUME_MIN	47
-+#define WM_VOLUME_SCALE	80
-+
-+#if defined(WM8731)
-+	/* OSS interface to the wm i2s.. */
-+	#define CODEC_NAME "Wolfson WM8731 I2S"
-+	#define WM_I2S_STEREO_MASK (SOUND_MASK_PCM | SOUND_MASK_LINE)
-+	#define WM_I2S_SUPPORTED_MASK (WM_I2S_STEREO_MASK | SOUND_MASK_MIC)
-+	#define WM_I2S_RECORD_MASK (SOUND_MASK_MIC | SOUND_MASK_LINE1 | SOUND_MASK_LINE)
-+#elif defined(WM8721)
-+	#define CODEC_NAME "Wolfson WM8721 I2S"
-+	#define WM_I2S_STEREO_MASK (SOUND_MASK_PCM)
-+	#define WM_I2S_SUPPORTED_MASK (WM_I2S_STEREO_MASK)
-+	#define WM_I2S_RECORD_MASK (0)
-+#endif
-+
-+
-+#define supported_mixer(FOO) ((FOO >= 0) && \
-+                                    (FOO < SOUND_MIXER_NRDEVICES) && \
-+                                    WM_I2S_SUPPORTED_MASK & (1<<FOO) )
-+
- #include <asm/au1xxx_psc.h>
- #include <asm/au1xxx_dbdma.h>
- 
-@@ -98,13 +137,51 @@
-  * 0 = no VRA, 1 = use VRA if codec supports it
-  * The framework is here, but we currently force no VRA.
-  */
-+#if defined(CONFIG_MIPS_PB1200) | defined(CONFIG_MIPS_PB1550)
- static int      vra = 0;
-+#elif defined(CONFIG_MIPS_FICMMP)
-+static int vra = 1;
-+#endif
-+
-+#define WM_REG_L_HEADPHONE_OUT			0x02
-+#define WM_REG_R_HEADPHONE_OUT			0x03
-+#define WM_REG_ANALOGUE_AUDIO_PATH_CTRL		0x04
-+#define WM_REG_DIGITAL_AUDIO_PATH_CTRL		0x05
-+#define WM_REG_POWER_DOWN_CTRL			0x06
-+#define WM_REG_DIGITAL_AUDIO_IF			0x07
-+#define WM_REG_SAMPLING_CONTROL 		0x08
-+#define WM_REG_ACTIVE_CTRL			0x09
-+#define WM_REG_RESET				0x0F
-+#define WM_SC_SR_96000		(0x7<<2)
-+#define WM_SC_SR_88200		(0xF<<2)
-+#define WM_SC_SR_48000		(0x0<<2)
-+#define WM_SC_SR_44100		(0x8<<2)
-+#define WM_SC_SR_32000		(0x6<<2)
-+#define WM_SC_SR_8018		(0x9<<2)
-+#define WM_SC_SR_8000		(0x1<<2)
-+#define WM_SC_MODE_USB		1
-+#define WM_SC_MODE_NORMAL	0
-+#define WM_SC_BOSR_250FS	(0<<1)
-+#define WM_SC_BOSR_272FS	(1<<1)
-+#define WM_SC_BOSR_256FS	(0<<1)
-+#define WM_SC_BOSR_128FS	(0<<1)
-+#define WM_SC_BOSR_384FS	(1<<1)
-+#define WM_SC_BOSR_192FS	(1<<1)
-+
-+#define WS_64FS			31
-+#define WS_96FS			47
-+#define WS_128FS		63
-+#define WS_192FS		95
-+
-+#define MIN_Q_COUNT		2
-+
- MODULE_PARM(vra, "i");
- MODULE_PARM_DESC(vra, "if 1 use VRA if codec supports it");
- 
- static struct au1550_state {
- 	/* soundcore stuff */
- 	int             dev_audio;
-+	int				dev_mixer;
- 
- 	spinlock_t		lock;
- 	struct semaphore	open_sem;
-@@ -114,6 +191,11 @@
- 	int			no_vra;
- 	volatile psc_i2s_t	*psc_addr;
- 
-+	int level_line;
-+	int level_mic;
-+	int level_left;
-+	int level_right;
-+
- 	struct dmabuf {
- 		u32		dmanr;
- 		unsigned        sample_rate;
-@@ -195,60 +277,224 @@
- 	}
- }
- 
--/* Just a place holder.  The Wolfson codec is a write only device,
-- * so we would have to keep a local copy of the data.
-- */
--#if 0
--static u8
--rdcodec(u8 addr)
--{
--	return 0  /* data */;
--}
--#endif
--
--
- static void
--wrcodec(u8 ctlreg, u8 val)
-+wrcodec(u8 ctlreg, u16 val)
- {
- 	int	rcnt;
- 	extern int pb1550_wm_codec_write(u8 addr, u8 reg, u8 val);
--
- 	/* The codec is a write only device, with a 16-bit control/data
- 	 * word.  Although it is written as two bytes on the I2C, the
- 	 * format is actually 7 bits of register and 9 bits of data.
- 	 * The ls bit of the first byte is the ms bit of the data.
- 	 */
- 	rcnt = 0;
--	while ((pb1550_wm_codec_write((0x36 >> 1), ctlreg, val) != 1) 
--							&& (rcnt < 50)) {
-+	while ((pb1550_wm_codec_write((0x36 >> 1), 
-+					(ctlreg << 1) | ((val >> 8) & 0x01), 
-+					(u8) (val & 0x00FF)) != 1) && 
-+			(rcnt < 50)) {
- 		rcnt++;
--#if 0
--		printk("Codec write retry %02x %02x\n", ctlreg, val);
--#endif
- 	}
-+
-+	au1550_delay(10);
-+}
-+
-+static int
-+au1550_open_mixdev(struct inode *inode, struct file *file)
-+{
-+	file->private_data = &au1550_state;
-+	return 0;
-+}
-+
-+static int
-+au1550_release_mixdev(struct inode *inode, struct file *file)
-+{
-+	return 0;
-+}
-+
-+static int wm_i2s_read_mixer(struct au1550_state *s, int oss_channel)
-+{
-+	int ret = 0;
-+
-+	if (WM_I2S_STEREO_MASK & (1 << oss_channel)) {
-+		/* nice stereo mixers .. */
-+
-+		ret = s->level_left | (s->level_right << 8);
-+	} else if (oss_channel == SOUND_MIXER_MIC) {
-+		ret = 0;
-+		/* TODO: Implement read mixer for input/output codecs */
-+	}
-+
-+	return ret;
- }
- 
-+static void wm_i2s_write_mixer(struct au1550_state *s, int oss_channel, unsigned int left, unsigned int right)
-+{
-+	if (WM_I2S_STEREO_MASK & (1 << oss_channel)) {
-+		/* stereo mixers */
-+		s->level_left = left;
-+		s->level_right = right;
-+
-+		right = (right * WM_VOLUME_SCALE) / 100;
-+		left  = (left  * WM_VOLUME_SCALE) / 100;
-+		if (right > WM_VOLUME_SCALE)
-+			right = WM_VOLUME_SCALE;
-+		if (left > WM_VOLUME_SCALE)
-+			left = WM_VOLUME_SCALE;
-+
-+		right += WM_VOLUME_MIN;
-+		left  += WM_VOLUME_MIN;
-+
-+		wrcodec(WM_REG_L_HEADPHONE_OUT, left);
-+		wrcodec(WM_REG_R_HEADPHONE_OUT, right);
-+
-+	}else if (oss_channel == SOUND_MIXER_MIC) {
-+		/* TODO: implement write mixer for input/output codecs */
-+	}
-+}
-+
-+/* a thin wrapper for write_mixer */
-+static void wm_i2s_set_mixer(struct au1550_state *s, unsigned int oss_mixer, unsigned int val )
-+{
-+	unsigned int left,right;
-+
-+	/* cleanse input a little */
-+	right = ((val >> 8)  & 0xff) ;
-+	left = (val  & 0xff) ;
-+
-+	if (right > 100) right = 100;
-+	if (left > 100) left = 100;
-+
-+	wm_i2s_write_mixer(s, oss_mixer, left, right);
-+}
-+
-+static int
-+au1550_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+	struct au1550_state *s = (struct au1550_state *)file->private_data;
-+
-+	int i, val = 0;
-+
-+	if (cmd == SOUND_MIXER_INFO) {
-+		mixer_info info;
-+		strncpy(info.id, CODEC_NAME, sizeof(info.id));
-+		strncpy(info.name, CODEC_NAME, sizeof(info.name));
-+		info.modify_counter = 0;
-+		if (copy_to_user((void *)arg, &info, sizeof(info)))
-+			return -EFAULT;
-+		return 0;
-+	}
-+	if (cmd == SOUND_OLD_MIXER_INFO) {
-+		_old_mixer_info info;
-+		strncpy(info.id, CODEC_NAME, sizeof(info.id));
-+		strncpy(info.name, CODEC_NAME, sizeof(info.name));
-+		if (copy_to_user((void *)arg, &info, sizeof(info)))
-+			return -EFAULT;
-+		return 0;
-+	}
-+
-+	if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int))
-+		return -EINVAL;
-+
-+	if (cmd == OSS_GETVERSION)
-+		return put_user(SOUND_VERSION, (int *)arg);
-+
-+	if (_SIOC_DIR(cmd) == _SIOC_READ) {
-+		switch (_IOC_NR(cmd)) {
-+		case SOUND_MIXER_RECSRC: /* give them the current record src */
-+			val = 0;
-+			/*
-+			if (!codec->recmask_io) {
-+				val = 0;
-+			} else {
-+				val = codec->recmask_io(codec, 1, 0);
-+			}*/
-+			break;
-+
-+		case SOUND_MIXER_DEVMASK: /* give them the supported mixers */
-+			val = WM_I2S_SUPPORTED_MASK;
-+			break;
-+
-+		case SOUND_MIXER_RECMASK: 
-+			/* Arg contains a bit for each supported recording 
-+			 * source */
-+			val = WM_I2S_RECORD_MASK;
-+			break;
-+
-+		case SOUND_MIXER_STEREODEVS: 
-+			/* Mixer channels supporting stereo */
-+			val = WM_I2S_STEREO_MASK;
-+			break;
-+
-+		case SOUND_MIXER_CAPS:
-+			val = SOUND_CAP_EXCL_INPUT;
-+			break;
-+
-+		default: /* read a specific mixer */
-+			i = _IOC_NR(cmd);
-+
-+			if (!supported_mixer(i))
-+				return -EINVAL;
-+
-+			val = wm_i2s_read_mixer(s, i);
-+ 			break;
-+		}
-+		return put_user(val, (int *)arg);
-+	}
-+
-+	if (_SIOC_DIR(cmd) == (_SIOC_WRITE|_SIOC_READ)) {
-+		if (get_user(val, (int *)arg))
-+			return -EFAULT;
-+
-+		switch (_IOC_NR(cmd)) {
-+		case SOUND_MIXER_RECSRC: 
-+			/* Arg contains a bit for each recording source */
-+			if (!WM_I2S_RECORD_MASK)
-+				return -EINVAL;
-+			if (!val)
-+				return 0;
-+			if (!(val &= WM_I2S_RECORD_MASK))
-+				return -EINVAL;
-+
-+			return 0;
-+		default: /* write a specific mixer */
-+			i = _IOC_NR(cmd);
-+
-+			if (!supported_mixer(i))
-+				return -EINVAL;
-+
-+			wm_i2s_set_mixer(s, i, val);
-+
-+			return 0;
-+	}
-+}
-+	return -EINVAL;
-+}
-+
-+static loff_t
-+au1550_llseek(struct file *file, loff_t offset, int origin)
-+{
-+	return -ESPIPE;
-+}
-+
-+static /*const */ struct file_operations au1550_mixer_fops = {
-+	owner:THIS_MODULE,
-+	llseek:au1550_llseek,
-+	ioctl:au1550_ioctl_mixdev,
-+	open:au1550_open_mixdev,
-+	release:au1550_release_mixdev,
-+};
-+
- void
--codec_init(void)
-+codec_init(struct au1550_state *s)
- {
--	wrcodec(0x1e, 0x00);	/* Reset */
--	au1550_delay(200);
--	wrcodec(0x0c, 0x00);	/* Power up everything */
--	au1550_delay(10);
--	wrcodec(0x12, 0x00);	/* Deactivate codec */
--	au1550_delay(10);
--	wrcodec(0x08, 0x10);	/* Select DAC outputs to line out */
--	au1550_delay(10);
--	wrcodec(0x0a, 0x00);	/* Disable output mute */
--	au1550_delay(10);
--	wrcodec(0x05, 0x70);	/* lower output volume on headphone */
--	au1550_delay(10);
--	wrcodec(0x0e, 0x02);	/* Set slave, 16-bit, I2S modes */
--	au1550_delay(10);
--	wrcodec(0x10, 0x01);	/* 12MHz (USB), 250fs */
--	au1550_delay(10);
--	wrcodec(0x12, 0x01);	/* Activate codec */
--	au1550_delay(10);
-+	wrcodec(WM_REG_RESET, 0x00);	/* Reset */
-+	wrcodec(WM_REG_POWER_DOWN_CTRL, 0x00);	/* Power up everything */
-+	wrcodec(WM_REG_ACTIVE_CTRL, 0x00);	/* Deactivate codec */
-+	wrcodec(WM_REG_ANALOGUE_AUDIO_PATH_CTRL, 0x10);	/* Select DAC outputs to line out */
-+	wrcodec(WM_REG_DIGITAL_AUDIO_PATH_CTRL, 0x00);	/* Disable output mute */
-+	wm_i2s_write_mixer(s, SOUND_MIXER_PCM, 74, 74);
-+	wrcodec(WM_REG_DIGITAL_AUDIO_IF, 0x02);	/* Set slave, 16-bit, I2S modes */
-+	wrcodec(WM_REG_ACTIVE_CTRL, 0x01);	/* Activate codec */
- }
- 
- /* stop the ADC before calling */
-@@ -256,27 +502,16 @@
- set_adc_rate(struct au1550_state *s, unsigned rate)
- {
- 	struct dmabuf  *adc = &s->dma_adc;
--	struct dmabuf  *dac = &s->dma_dac;
- 
--	if (s->no_vra) {
--		/* calc SRC factor
--		*/
-+	#if defined(WM_MODE_USB)
- 		adc->src_factor = (((SAMP_RATE*2) / rate) + 1) >> 1;
- 		adc->sample_rate = SAMP_RATE / adc->src_factor;
- 		return;
--	}
-+	#else
-+	//TODO: Need code for normal mode
-+	#endif
- 
- 	adc->src_factor = 1;
--
--
--#if 0
--	rate = rate > SAMP_RATE ? SAMP_RATE : rate;
--
--	wrcodec(0, 0);	/* I don't yet know what to write here if we vra */
--
--	adc->sample_rate = rate;
--	dac->sample_rate = rate;
--#endif
- }
- 
- /* stop the DAC before calling */
-@@ -284,26 +519,89 @@
- set_dac_rate(struct au1550_state *s, unsigned rate)
- {
- 	struct dmabuf  *dac = &s->dma_dac;
--	struct dmabuf  *adc = &s->dma_adc;
- 
--	if (s->no_vra) {
--		/* calc SRC factor
--		*/
--		dac->src_factor = (((SAMP_RATE*2) / rate) + 1) >> 1;
--		dac->sample_rate = SAMP_RATE / dac->src_factor;
--		return;
-+	u16 sr, ws, div, bosr, mode;
-+	volatile psc_i2s_t* ip = (volatile psc_i2s_t *)I2S_PSC_BASE;
-+	u32 cfg;
-+
-+	#if defined(CONFIG_MIPS_FICMMP)
-+		rate = ficmmp_set_i2s_sample_rate(rate);
-+	#endif
-+
-+	switch(rate)
-+	{
-+		case 96000: 
-+			sr = WM_SC_SR_96000; 
-+			ws = WS_64FS;  
-+			div = PSC_I2SCFG_DIV2;  
-+			break;
-+		case 88200: 
-+			sr = WM_SC_SR_88200; 
-+			ws = WS_64FS;  
-+			div = PSC_I2SCFG_DIV2;  
-+			break;
-+		case 44100: 
-+			sr = WM_SC_SR_44100; 
-+			ws = WS_128FS; 
-+			div = PSC_I2SCFG_DIV2;  
-+			break;
-+		case 48000: 
-+			sr = WM_SC_SR_48000; 
-+			ws = WS_128FS; 
-+			div = PSC_I2SCFG_DIV2;  
-+			break;
-+		case 32000: 
-+			sr = WM_SC_SR_32000; 
-+			ws = WS_96FS;  
-+			div = PSC_I2SCFG_DIV4;  
-+			break;
-+		case  8018: 
-+			sr = WM_SC_SR_8018;  
-+			ws = WS_128FS; 
-+			div = PSC_I2SCFG_DIV2;  
-+			break;
-+		case  8000:
-+		default:    
-+			sr = WM_SC_SR_8000;  
-+			ws = WS_96FS;  
-+			div = PSC_I2SCFG_DIV16; 
-+			break;
- 	}
- 
-+	#if defined(WM_MODE_USB)
-+		mode = WM_SC_MODE_USB;
-+	#else
-+		mode = WM_SC_MODE_NORMAL;
-+	#endif
-+
-+	bosr = 0;
-+
- 	dac->src_factor = 1;
-+	dac->sample_rate = rate;
- 
--#if 0
--	rate = rate > SAMP_RATE ? SAMP_RATE : rate;
-+	/* Deactivate codec */
-+	wrcodec(WM_REG_ACTIVE_CTRL, 0x00);
- 
--	wrcodec(0, 0);	/* I don't yet know what to write here if we vra */
-+	/* Disable I2S controller */
-+	ip->psc_i2scfg &= ~PSC_I2SCFG_DE_ENABLE;
-+	/* Wait for device disabled */
-+	while ((ip->psc_i2sstat & PSC_I2SSTAT_DR) == 1);
-+
-+	cfg = ip->psc_i2scfg;
-+	/* Clear WS and DIVIDER values */
-+	cfg &= ~(PSC_I2SCFG_WS_MASK | PSC_I2SCFG_DIV_MASK);	
-+	cfg |= PSC_I2SCFG_WS(ws) | div;
-+	/* Reconfigure and enable */
-+	ip->psc_i2scfg = cfg | PSC_I2SCFG_DE_ENABLE;	
- 
--	adc->sample_rate = rate;
--	dac->sample_rate = rate;
--#endif
-+	/* Wait for device enabled */
-+	while ((ip->psc_i2sstat & PSC_I2SSTAT_DR) == 0);
-+
-+	/* Set appropriate sampling rate */
-+	wrcodec(WM_REG_SAMPLING_CONTROL, bosr | mode | sr);
-+
-+	/* Activate codec */
-+	wrcodec(WM_REG_ACTIVE_CTRL, 0x01);
- }
- 
- static void
-@@ -354,8 +652,7 @@
- 	ip->psc_i2spcr = PSC_I2SPCR_RP;
- 	au_sync();
- 
--	/* Wait for Receive Busy to show disabled.
--	*/
-+	/* Wait for Receive Busy to show disabled.  */
- 	do {
- 		stat = ip->psc_i2sstat;
- 		au_sync();
-@@ -463,7 +760,6 @@
- 	if (db->num_channels == 1)
- 		db->cnt_factor *= 2;
- 	db->cnt_factor *= db->src_factor;
--
- 	db->count = 0;
- 	db->dma_qcount = 0;
- 	db->nextIn = db->nextOut = db->rawbuf;
-@@ -546,12 +842,13 @@
- 	if (i2s_stat & (PSC_I2SSTAT_TF | PSC_I2SSTAT_TR | PSC_I2SSTAT_TF))
- 		dbg("I2S status = 0x%08x", i2s_stat);
- #endif
-+
- 	db->dma_qcount--;
- 
- 	if (db->count >= db->fragsize) {
--		if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
--							db->fragsize) == 0) {
--			err("qcount < 2 and no ring room!");
-+		if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, db->fragsize) == 0)
-+		{
-+			err("qcount < MIN_Q_COUNT and no ring room!");
- 		}
- 		db->nextOut += db->fragsize;
- 		if (db->nextOut >= db->rawbuf + db->dmasize)
-@@ -606,65 +903,43 @@
- 
- }
- 
--static loff_t
--au1550_llseek(struct file *file, loff_t offset, int origin)
--{
--	return -ESPIPE;
--}
--
--
--#if 0
--static int
--au1550_open_mixdev(struct inode *inode, struct file *file)
--{
--	file->private_data = &au1550_state;
--	return 0;
--}
--
--static int
--au1550_release_mixdev(struct inode *inode, struct file *file)
--{
--	return 0;
--}
--
--static int
--mixdev_ioctl(struct ac97_codec *codec, unsigned int cmd,
--                        unsigned long arg)
--{
--	return codec->mixer_ioctl(codec, cmd, arg);
--}
--
--static int
--au1550_ioctl_mixdev(struct inode *inode, struct file *file,
--			       unsigned int cmd, unsigned long arg)
--{
--	struct au1550_state *s = (struct au1550_state *)file->private_data;
--	struct ac97_codec *codec = s->codec;
--
--	return mixdev_ioctl(codec, cmd, arg);
--}
--
--static /*const */ struct file_operations au1550_mixer_fops = {
--	owner:THIS_MODULE,
--	llseek:au1550_llseek,
--	ioctl:au1550_ioctl_mixdev,
--	open:au1550_open_mixdev,
--	release:au1550_release_mixdev,
--};
--#endif
--
- static int
- drain_dac(struct au1550_state *s, int nonblock)
- {
- 	unsigned long   flags;
- 	int             count, tmo;
- 
-+	struct dmabuf  *db = &s->dma_dac;
-+
-+	//DPRINTF();
- 	if (s->dma_dac.mapped || !s->dma_dac.ready || s->dma_dac.stopped)
- 		return 0;
- 
- 	for (;;) {
- 		spin_lock_irqsave(&s->lock, flags);
--		count = s->dma_dac.count;
-+		count = db->count;
-+
-+		/* Pad the ddma buffer with zeros if the amount remaining 
-+		 * is not a multiple of fragsize */
-+		if(count % db->fragsize != 0)
-+		{
-+			int pad = db->fragsize - (count % db->fragsize);
-+			char* bufptr = db->nextIn;
-+			char* bufend = db->rawbuf + db->dmasize;
-+
-+			if((bufend - bufptr) < pad)
-+				printk("Error!  ddma padding is bigger than available ring space!\n");
-+			else
-+			{
-+				memset((void*)bufptr, 0, pad);
-+				count += pad;
-+				db->nextIn += pad;
-+				db->count += pad;
-+				if (db->dma_qcount == 0)
-+						start_dac(s);
-+				db->dma_qcount++;
-+			}
-+		}
- 		spin_unlock_irqrestore(&s->lock, flags);
- 		if (count <= 0)
- 			break;
-@@ -672,9 +947,9 @@
- 			break;
- 		if (nonblock)
- 			return -EBUSY;
--		tmo = 1000 * count / (s->no_vra ?
--				      SAMP_RATE : s->dma_dac.sample_rate);
-+		tmo = 1000 * count / s->dma_dac.sample_rate;
- 		tmo /= s->dma_dac.dma_bytes_per_sample;
-+
- 		au1550_delay(tmo);
- 	}
- 	if (signal_pending(current))
-@@ -698,8 +973,7 @@
-  *     If interpolating (no VRA), duplicate every audio frame src_factor times.
-  */
- static int
--translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf,
--							       int dmacount)
-+translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf, int dmacount)
- {
- 	int             sample, i;
- 	int             interp_bytes_per_sample;
-@@ -737,11 +1011,12 @@
- 
- 		/* duplicate every audio frame src_factor times
- 		*/
--		for (i = 0; i < db->src_factor; i++)
-+		for (i = 0; i < db->src_factor; i++) {
- 			memcpy(dmabuf, dmasample, db->dma_bytes_per_sample);
-+			dmabuf += interp_bytes_per_sample;
-+		}
- 
- 		userbuf += db->user_bytes_per_sample;
--		dmabuf += interp_bytes_per_sample;
- 	}
- 
- 	return num_samples * interp_bytes_per_sample;
-@@ -996,15 +1271,14 @@
- 		 * on the dma queue.  If the queue count reaches zero,
- 		 * we know the dma has stopped.
- 		 */
--		while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) {
-+		while ((db->dma_qcount < MIN_Q_COUNT) && (db->count >= db->fragsize)) {
- 			if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
- 							db->fragsize) == 0) {
--				err("qcount < 2 and no ring room!");
-+				err("qcount < MIN_Q_COUNT and no ring room!");
- 			}
- 			db->nextOut += db->fragsize;
- 			if (db->nextOut >= db->rawbuf + db->dmasize)
- 				db->nextOut -= db->dmasize;
--			db->count -= db->fragsize;
- 			db->total_bytes += db->dma_fragsize;
- 			if (db->dma_qcount == 0)
- 				start_dac(s);
-@@ -1017,7 +1291,6 @@
- 		buffer += usercnt;
- 		ret += usercnt;
- 	}			/* while (count > 0) */
--
- out:
- 	up(&s->sem);
- out2:
-@@ -1371,9 +1644,6 @@
- 			s->dma_dac.cnt_factor;
- 		abinfo.fragstotal = s->dma_dac.numfrag;
- 		abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift;
--#ifdef AU1000_VERBOSE_DEBUG
--		dbg("bytes=%d, fragments=%d", abinfo.bytes, abinfo.fragments);
--#endif
- 		return copy_to_user((void *) arg, &abinfo,
- 				    sizeof(abinfo)) ? -EFAULT : 0;
- 
-@@ -1536,13 +1806,9 @@
- 	case SNDCTL_DSP_SETSYNCRO:
- 	case SOUND_PCM_READ_FILTER:
- 		return -EINVAL;
-+	default: break;
- 	}
--
--#if 0
--	return mixdev_ioctl(s->codec, cmd, arg);
--#else
- 	return 0;
--#endif
- }
- 
- 
-@@ -1664,15 +1930,15 @@
- MODULE_AUTHOR("Advanced Micro Devices (AMD), dan@embeddededge.com");
- MODULE_DESCRIPTION("Au1550 Audio Driver");
- 
-+#if defined(WM_MODE_USB)
- /* Set up an internal clock for the PSC3.  This will then get
-  * driven out of the Au1550 as the master.
-  */
- static void
- intclk_setup(void)
- {
--	uint	clk, rate, stat;
--
--	/* Wire up Freq4 as a clock for the PSC3.
-+	uint	clk, rate;
-+	/* Wire up Freq4 as a clock for the PSC.
- 	 * We know SMBus uses Freq3.
- 	 * By making changes to this rate, plus the word strobe
- 	 * size, we can make fine adjustments to the actual data rate.
-@@ -1700,11 +1966,17 @@
- 	*/
- 	clk = au_readl(SYS_CLKSRC);
- 	au_sync();
-+#if defined(CONFIG_SOC_AU1550)
- 	clk &= ~0x01f00000;
- 	clk |= (6 << 22);
-+#elif defined(CONFIG_SOC_AU1200)
-+	clk &= ~0x3e000000;
-+	clk |= (6 << 27);
-+#endif
- 	au_writel(clk, SYS_CLKSRC);
- 	au_sync();
- }
-+#endif
- 
- static int __devinit
- au1550_probe(void)
-@@ -1724,6 +1996,11 @@
- 	init_MUTEX(&s->open_sem);
- 	spin_lock_init(&s->lock);
- 
-+	/* CPLD Mux for I2s */
-+
-+#if defined(CONFIG_MIPS_PB1200)
-+	bcsr->resets |= BCSR_RESETS_PCS1MUX;
-+#endif
- 
- 	s->psc_addr = (volatile psc_i2s_t *)I2S_PSC_BASE;
- 	ip = s->psc_addr;
-@@ -1765,9 +2042,8 @@
- 
- 	if ((s->dev_audio = register_sound_dsp(&au1550_audio_fops, -1)) < 0)
- 		goto err_dev1;
--#if 0
--	if ((s->codec->dev_mixer =
--	     register_sound_mixer(&au1550_mixer_fops, -1)) < 0)
-+#if 1
-+	if ((s->dev_mixer = register_sound_mixer(&au1550_mixer_fops, -1)) < 0)
- 		goto err_dev2;
- #endif
- 
-@@ -1777,7 +2053,6 @@
- 				       proc_au1550_dump, NULL);
- #endif /* AU1550_DEBUG */
- 
--	intclk_setup();
- 
- 	/* The GPIO for the appropriate PSC was configured by the
- 	 * board specific start up.
-@@ -1786,7 +2061,12 @@
- 	 */
- 	ip->psc_ctrl = PSC_CTRL_DISABLE;	/* Disable PSC */
- 	au_sync();
-+#if defined(WM_MODE_USB)
-+	intclk_setup();
- 	ip->psc_sel = (PSC_SEL_CLK_INTCLK | PSC_SEL_PS_I2SMODE);
-+#else
-+	ip->psc_sel = (PSC_SEL_CLK_EXTCLK | PSC_SEL_PS_I2SMODE);
-+#endif
- 	au_sync();
- 
- 	/* Enable PSC
-@@ -1806,42 +2086,18 @@
- 	 * Actual I2S mode (first bit delayed by one clock).
- 	 * Master mode (We provide the clock from the PSC).
- 	 */
--	val = PSC_I2SCFG_SET_LEN(16);
--#ifdef TRY_441KHz
--	/* This really should be 250, but it appears that all of the
--	 * PLLs, dividers and so on in the chain shift it.  That's the
--	 * problem with sourceing the clock instead of letting the very
--	 * stable codec provide it.  But, the PSC doesn't appear to want
--	 * to work in slave mode, so this is what we get.  It's  not
--	 * studio quality timing, but it's good enough for listening
--	 * to mp3s.
--	 */
--	val |= PSC_I2SCFG_SET_WS(252);
--#else
--	val |= PSC_I2SCFG_SET_WS(250);
--#endif
--	val |= PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8 | \
-+
-+	val = PSC_I2SCFG_SET_LEN(16) | PSC_I2SCFG_WS(WS_128FS) | PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8 | \
- 					PSC_I2SCFG_BI | PSC_I2SCFG_XM;
- 
--	ip->psc_i2scfg = val;
--	au_sync();
--	val |= PSC_I2SCFG_DE_ENABLE;
--	ip->psc_i2scfg = val;
--	au_sync();
-+	ip->psc_i2scfg = val | PSC_I2SCFG_DE_ENABLE;
- 
--	/* Wait for Device ready.
--	*/
--	do {
--		val = ip->psc_i2sstat;
--		au_sync();
--	} while ((val & PSC_I2SSTAT_DR) == 0);
-+	set_dac_rate(s, 8000);  //Set default rate
- 
--	val = ip->psc_i2scfg;
--	au_sync();
-+	codec_init(s);
- 
--	codec_init();
-+	s->no_vra = vra ? 0 : 1;
- 
--	s->no_vra = 1;
- 	if (s->no_vra)
- 		info("no VRA, interpolating and decimating");
- 
-@@ -1866,6 +2122,8 @@
-  err_dev2:
- 	unregister_sound_dsp(s->dev_audio);
- #endif
-+ err_dev2:
-+	unregister_sound_dsp(s->dev_audio);
-  err_dev1:
- 	au1xxx_dbdma_chan_free(s->dma_adc.dmanr);
-  err_dma2:
-diff -Nur linux-2.4.32-rc1/drivers/sound/au1550_psc.c linux-2.4.32-rc1.mips/drivers/sound/au1550_psc.c
---- linux-2.4.32-rc1/drivers/sound/au1550_psc.c	2005-01-19 15:10:04.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/sound/au1550_psc.c	2005-01-30 09:01:28.000000000 +0100
-@@ -30,6 +30,7 @@
-  *  675 Mass Ave, Cambridge, MA 02139, USA.
-  *
-  */
-+
- #include <linux/version.h>
- #include <linux/module.h>
- #include <linux/string.h>
-@@ -63,6 +64,14 @@
- #include <asm/db1x00.h>
- #endif
- 
-+#ifdef CONFIG_MIPS_PB1200
-+#include <asm/pb1200.h>
-+#endif
-+
-+#ifdef CONFIG_MIPS_DB1200
-+#include <asm/db1200.h>
-+#endif
-+
- #undef OSS_DOCUMENTED_MIXER_SEMANTICS
- 
- #define AU1550_MODULE_NAME "Au1550 psc audio"
-@@ -521,7 +530,14 @@
- 	spin_unlock_irqrestore(&s->lock, flags);
- }
- 
--
-+/* 
-+   NOTE: The xmit slots cannot be changed on the fly when in full-duplex 
-+   because the AC'97 block must be stopped/started.  When using this driver 
-+   in full-duplex (in & out at the same time), the DMA engine will stop if 
-+   you disable the block.
-+   TODO: change implementation to properly restart adc/dac after setting 
-+   xmit slots.
-+*/
- static void
- set_xmit_slots(int num_channels)
- {
-@@ -565,6 +581,14 @@
- 	} while ((stat & PSC_AC97STAT_DR) == 0);
- }
- 
-+/* 
-+   NOTE: The recv slots cannot be changed on the fly when in full-duplex 
-+   because the AC'97 block must be stopped/started.  When using this driver 
-+   in full-duplex (in & out at the same time), the DMA engine will stop if 
-+   you disable the block.
-+   TODO: change implementation to properly restart adc/dac after setting 
-+   recv slots.
-+*/
- static void
- set_recv_slots(int num_channels)
- {
-@@ -608,7 +632,6 @@
- 
- 	spin_lock_irqsave(&s->lock, flags);
- 
--	set_xmit_slots(db->num_channels);
- 	au_writel(PSC_AC97PCR_TC, PSC_AC97PCR);
- 	au_sync();
- 	au_writel(PSC_AC97PCR_TS, PSC_AC97PCR);
-@@ -640,7 +663,6 @@
- 			db->nextIn -= db->dmasize;
- 	}
- 
--	set_recv_slots(db->num_channels);
- 	au1xxx_dbdma_start(db->dmanr);
- 	au_writel(PSC_AC97PCR_RC, PSC_AC97PCR);
- 	au_sync();
-@@ -752,12 +774,16 @@
- 	if (ac97c_stat & (AC97C_XU | AC97C_XO | AC97C_TE))
- 		dbg("AC97C status = 0x%08x", ac97c_stat);
- #endif
-+	/* There is a possiblity that we are getting 1 interrupt for
-+	   multiple descriptors. Use ddma api to find out how many
-+	   completed.
-+	*/
- 	db->dma_qcount--;
- 
- 	if (db->count >= db->fragsize) {
- 		if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
- 							db->fragsize) == 0) {
--			err("qcount < 2 and no ring room!");
-+			err("qcount < 2 and no ring room1!");
- 		}
- 		db->nextOut += db->fragsize;
- 		if (db->nextOut >= db->rawbuf + db->dmasize)
-@@ -941,11 +967,12 @@
- 
- 		/* duplicate every audio frame src_factor times
- 		*/
--		for (i = 0; i < db->src_factor; i++)
-+		for (i = 0; i < db->src_factor; i++) {
- 			memcpy(dmabuf, dmasample, db->dma_bytes_per_sample);
-+			dmabuf += interp_bytes_per_sample;
-+		}
- 
- 		userbuf += db->user_bytes_per_sample;
--		dmabuf += interp_bytes_per_sample;
- 	}
- 
- 	return num_samples * interp_bytes_per_sample;
-@@ -1203,7 +1230,7 @@
- 		while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) {
- 			if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
- 							db->fragsize) == 0) {
--				err("qcount < 2 and no ring room!");
-+				err("qcount < 2 and no ring room!0");
- 			}
- 			db->nextOut += db->fragsize;
- 			if (db->nextOut >= db->rawbuf + db->dmasize)
-@@ -1481,6 +1508,7 @@
- 					return -EINVAL;
- 				stop_adc(s);
- 				s->dma_adc.num_channels = val;
-+				set_recv_slots(val);
- 				if ((ret = prog_dmabuf_adc(s)))
- 					return ret;
- 			}
-@@ -1538,6 +1566,7 @@
- 				}
- 
- 				s->dma_dac.num_channels = val;
-+				set_xmit_slots(val);
- 				if ((ret = prog_dmabuf_dac(s)))
- 					return ret;
- 			}
-@@ -1832,10 +1861,8 @@
- 		down(&s->open_sem);
- 	}
- 
--	stop_dac(s);
--	stop_adc(s);
--
- 	if (file->f_mode & FMODE_READ) {
-+		stop_adc(s);
- 		s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags =
- 			s->dma_adc.subdivision = s->dma_adc.total_bytes = 0;
- 		s->dma_adc.num_channels = 1;
-@@ -1846,6 +1873,7 @@
- 	}
- 
- 	if (file->f_mode & FMODE_WRITE) {
-+		stop_dac(s);
- 		s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags =
- 			s->dma_dac.subdivision = s->dma_dac.total_bytes = 0;
- 		s->dma_dac.num_channels = 1;
-@@ -2091,6 +2119,9 @@
- 					     ac97_read_proc, &s->codec);
- #endif
- 
-+	set_xmit_slots(1);
-+	set_recv_slots(1);
-+
- 	return 0;
- 
-  err_dev3:
-diff -Nur linux-2.4.32-rc1/drivers/sound/Config.in linux-2.4.32-rc1.mips/drivers/sound/Config.in
---- linux-2.4.32-rc1/drivers/sound/Config.in	2005-01-19 15:10:04.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/sound/Config.in	2005-04-21 07:53:07.000000000 +0200
-@@ -72,10 +72,15 @@
- if [ "$CONFIG_DDB5477" = "y" ]; then
-     dep_tristate '  NEC Vrc5477 AC97 sound' CONFIG_SOUND_VRC5477 $CONFIG_SOUND
- fi
--if [ "$CONFIG_SOC_AU1X00" = "y" -o  "$CONFIG_SOC_AU1500" = "y" ]; then
--    dep_tristate '  Au1x00 Sound' CONFIG_SOUND_AU1X00 $CONFIG_SOUND
--    dep_tristate '  Au1550 PSC Sound' CONFIG_SOUND_AU1550_PSC $CONFIG_SOUND
--    dep_tristate '  Au1550 I2S Sound' CONFIG_SOUND_AU1550_I2S $CONFIG_SOUND
-+if [ "$CONFIG_SOC_AU1000" = "y" -o \
-+     "$CONFIG_SOC_AU1500" = "y" -o \
-+     "$CONFIG_SOC_AU1100" = "y" ]; then
-+    dep_tristate '  Au1x00 AC97 Sound' CONFIG_SOUND_AU1X00 $CONFIG_SOUND
-+fi
-+if [ "$CONFIG_SOC_AU1550" = "y" -o \
-+     "$CONFIG_SOC_AU1200" = "y" ]; then
-+    dep_tristate '  Au1550/Au1200 PSC AC97 Sound' CONFIG_SOUND_AU1550_PSC $CONFIG_SOUND
-+    dep_tristate '  Au1550/Au1200 PSC I2S Sound' CONFIG_SOUND_AU1550_I2S $CONFIG_SOUND
- fi
- 
- dep_tristate '  Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core' CONFIG_SOUND_TRIDENT $CONFIG_SOUND $CONFIG_PCI
-diff -Nur linux-2.4.32-rc1/drivers/tc/lk201.c linux-2.4.32-rc1.mips/drivers/tc/lk201.c
---- linux-2.4.32-rc1/drivers/tc/lk201.c	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/tc/lk201.c	2004-09-28 02:53:04.000000000 +0200
-@@ -5,7 +5,7 @@
-  * for more details.
-  *
-  * Copyright (C) 1999-2002 Harald Koerfgen <hkoerfg@web.de>
-- * Copyright (C) 2001, 2002, 2003  Maciej W. Rozycki <macro@ds2.pg.gda.pl>
-+ * Copyright (C) 2001, 2002, 2003, 2004  Maciej W. Rozycki
-  */
- 
- #include <linux/config.h>
-@@ -23,8 +23,8 @@
- #include <asm/keyboard.h>
- #include <asm/dec/tc.h>
- #include <asm/dec/machtype.h>
-+#include <asm/dec/serial.h>
- 
--#include "zs.h"
- #include "lk201.h"
- 
- /*
-@@ -55,19 +55,20 @@
- unsigned char kbd_sysrq_key = -1;
- #endif
- 
--#define KEYB_LINE	3
-+#define KEYB_LINE_ZS	3
-+#define KEYB_LINE_DZ	0
- 
--static int __init lk201_init(struct dec_serial *);
--static void __init lk201_info(struct dec_serial *);
--static void lk201_kbd_rx_char(unsigned char, unsigned char);
-+static int __init lk201_init(void *);
-+static void __init lk201_info(void *);
-+static void lk201_rx_char(unsigned char, unsigned char);
- 
--struct zs_hook lk201_kbdhook = {
-+static struct dec_serial_hook lk201_hook = {
- 	.init_channel	= lk201_init,
- 	.init_info	= lk201_info,
- 	.rx_char	= NULL,
- 	.poll_rx_char	= NULL,
- 	.poll_tx_char	= NULL,
--	.cflags		= B4800 | CS8 | CSTOPB | CLOCAL
-+	.cflags		= B4800 | CS8 | CSTOPB | CLOCAL,
- };
- 
- /*
-@@ -93,28 +94,28 @@
- 	LK_CMD_ENB_BELL, LK_PARAM_VOLUME(4),
- };
- 
--static struct dec_serial* lk201kbd_info;
-+static void *lk201_handle;
- 
--static int lk201_send(struct dec_serial *info, unsigned char ch)
-+static int lk201_send(unsigned char ch)
- {
--	if (info->hook->poll_tx_char(info, ch)) {
-+	if (lk201_hook.poll_tx_char(lk201_handle, ch)) {
- 		printk(KERN_ERR "lk201: transmit timeout\n");
- 		return -EIO;
- 	}
- 	return 0;
- }
- 
--static inline int lk201_get_id(struct dec_serial *info)
-+static inline int lk201_get_id(void)
- {
--	return lk201_send(info, LK_CMD_REQ_ID);
-+	return lk201_send(LK_CMD_REQ_ID);
- }
- 
--static int lk201_reset(struct dec_serial *info)
-+static int lk201_reset(void)
- {
- 	int i, r;
- 
- 	for (i = 0; i < sizeof(lk201_reset_string); i++) {
--		r = lk201_send(info, lk201_reset_string[i]);
-+		r = lk201_send(lk201_reset_string[i]);
- 		if (r < 0)
- 			return r;
- 	}
-@@ -203,24 +204,26 @@
- 
- static int write_kbd_rate(struct kbd_repeat *rep)
- {
--	struct dec_serial* info = lk201kbd_info;
- 	int delay, rate;
- 	int i;
- 
- 	delay = rep->delay / 5;
- 	rate = rep->rate;
- 	for (i = 0; i < 4; i++) {
--		if (info->hook->poll_tx_char(info, LK_CMD_RPT_RATE(i)))
-+		if (lk201_hook.poll_tx_char(lk201_handle,
-+					    LK_CMD_RPT_RATE(i)))
- 			return 1;
--		if (info->hook->poll_tx_char(info, LK_PARAM_DELAY(delay)))
-+		if (lk201_hook.poll_tx_char(lk201_handle,
-+					    LK_PARAM_DELAY(delay)))
- 			return 1;
--		if (info->hook->poll_tx_char(info, LK_PARAM_RATE(rate)))
-+		if (lk201_hook.poll_tx_char(lk201_handle,
-+					    LK_PARAM_RATE(rate)))
- 			return 1;
- 	}
- 	return 0;
- }
- 
--static int lk201kbd_rate(struct kbd_repeat *rep)
-+static int lk201_kbd_rate(struct kbd_repeat *rep)
- {
- 	if (rep == NULL)
- 		return -EINVAL;
-@@ -237,10 +240,8 @@
- 	return 0;
- }
- 
--static void lk201kd_mksound(unsigned int hz, unsigned int ticks)
-+static void lk201_kd_mksound(unsigned int hz, unsigned int ticks)
- {
--	struct dec_serial* info = lk201kbd_info;
--
- 	if (!ticks)
- 		return;
- 
-@@ -253,20 +254,19 @@
- 		ticks = 7;
- 	ticks = 7 - ticks;
- 
--	if (info->hook->poll_tx_char(info, LK_CMD_ENB_BELL))
-+	if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_ENB_BELL))
- 		return;
--	if (info->hook->poll_tx_char(info, LK_PARAM_VOLUME(ticks)))
-+	if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_VOLUME(ticks)))
- 		return;
--	if (info->hook->poll_tx_char(info, LK_CMD_BELL))
-+	if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_BELL))
- 		return;
- }
- 
- void kbd_leds(unsigned char leds)
- {
--	struct dec_serial* info = lk201kbd_info;
- 	unsigned char l = 0;
- 
--	if (!info)		/* FIXME */
-+	if (!lk201_handle)		/* FIXME */
- 		return;
- 
- 	/* FIXME -- Only Hold and Lock LEDs for now. --macro */
-@@ -275,13 +275,13 @@
- 	if (leds & LED_CAP)
- 		l |= LK_LED_LOCK;
- 
--	if (info->hook->poll_tx_char(info, LK_CMD_LEDS_ON))
-+	if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_ON))
- 		return;
--	if (info->hook->poll_tx_char(info, LK_PARAM_LED_MASK(l)))
-+	if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(l)))
- 		return;
--	if (info->hook->poll_tx_char(info, LK_CMD_LEDS_OFF))
-+	if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_OFF))
- 		return;
--	if (info->hook->poll_tx_char(info, LK_PARAM_LED_MASK(~l)))
-+	if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(~l)))
- 		return;
- }
- 
-@@ -307,7 +307,7 @@
- 	return 0x80;
- }
- 
--static void lk201_kbd_rx_char(unsigned char ch, unsigned char stat)
-+static void lk201_rx_char(unsigned char ch, unsigned char fl)
- {
- 	static unsigned char id[6];
- 	static int id_i;
-@@ -316,9 +316,8 @@
- 	static int prev_scancode;
- 	unsigned char c = scancodeRemap[ch];
- 
--	if (stat && stat != TTY_OVERRUN) {
--		printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n",
--		       stat);
-+	if (fl != TTY_NORMAL && fl != TTY_OVERRUN) {
-+		printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", fl);
- 		return;
- 	}
- 
-@@ -335,7 +334,7 @@
- 			/* OK, the power-up concluded. */
- 			lk201_report(id);
- 			if (id[2] == LK_STAT_PWRUP_OK)
--				lk201_get_id(lk201kbd_info);
-+				lk201_get_id();
- 			else {
- 				id_i = 0;
- 				printk(KERN_ERR "lk201: keyboard power-up "
-@@ -345,7 +344,7 @@
- 			/* We got the ID; report it and start operation. */
- 			id_i = 0;
- 			lk201_id(id);
--			lk201_reset(lk201kbd_info);
-+			lk201_reset();
- 		}
- 		return;
- 	}
-@@ -398,29 +397,28 @@
- 	tasklet_schedule(&keyboard_tasklet);
- }
- 
--static void __init lk201_info(struct dec_serial *info)
-+static void __init lk201_info(void *handle)
- {
- }
- 
--static int __init lk201_init(struct dec_serial *info)
-+static int __init lk201_init(void *handle)
- {
- 	/* First install handlers. */
--	lk201kbd_info = info;
--	kbd_rate = lk201kbd_rate;
--	kd_mksound = lk201kd_mksound;
-+	lk201_handle = handle;
-+	kbd_rate = lk201_kbd_rate;
-+	kd_mksound = lk201_kd_mksound;
- 
--	info->hook->rx_char = lk201_kbd_rx_char;
-+	lk201_hook.rx_char = lk201_rx_char;
- 
- 	/* Then just issue a reset -- the handlers will do the rest. */
--	lk201_send(info, LK_CMD_POWER_UP);
-+	lk201_send(LK_CMD_POWER_UP);
- 
- 	return 0;
- }
- 
- void __init kbd_init_hw(void)
- {
--	extern int register_zs_hook(unsigned int, struct zs_hook *);
--	extern int unregister_zs_hook(unsigned int);
-+	int keyb_line;
- 
- 	/* Maxine uses LK501 at the Access.Bus. */
- 	if (!LK_IFACE)
-@@ -428,19 +426,15 @@
- 
- 	printk(KERN_INFO "lk201: DECstation LK keyboard driver v0.05.\n");
- 
--	if (LK_IFACE_ZS) {
--		/*
--		 * kbd_init_hw() is being called before
--		 * rs_init() so just register the kbd hook
--		 * and let zs_init do the rest :-)
--		 */
--		if(!register_zs_hook(KEYB_LINE, &lk201_kbdhook))
--			unregister_zs_hook(KEYB_LINE);
--	} else {
--		/*
--		 * TODO: modify dz.c to allow similar hooks
--		 * for LK201 handling on DS2100, DS3100, and DS5000/200
--		 */
--		printk(KERN_ERR "lk201: support for DZ11 not yet ready.\n");
--	}
-+	/*
-+	 * kbd_init_hw() is being called before
-+	 * rs_init() so just register the kbd hook
-+	 * and let zs_init do the rest :-)
-+	 */
-+	if (LK_IFACE_ZS)
-+		keyb_line = KEYB_LINE_ZS;
-+	else
-+		keyb_line = KEYB_LINE_DZ;
-+	if (!register_dec_serial_hook(keyb_line, &lk201_hook))
-+		unregister_dec_serial_hook(keyb_line);
- }
-diff -Nur linux-2.4.32-rc1/drivers/tc/zs.c linux-2.4.32-rc1.mips/drivers/tc/zs.c
---- linux-2.4.32-rc1/drivers/tc/zs.c	2005-01-19 15:10:05.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/tc/zs.c	2004-12-27 05:13:50.000000000 +0100
-@@ -68,6 +68,8 @@
- #include <asm/bitops.h>
- #include <asm/uaccess.h>
- #include <asm/bootinfo.h>
-+#include <asm/dec/serial.h>
-+
- #ifdef CONFIG_DECSTATION
- #include <asm/dec/interrupts.h>
- #include <asm/dec/machtype.h>
-@@ -160,8 +162,8 @@
- #ifdef CONFIG_SERIAL_DEC_CONSOLE
- static struct console sercons;
- #endif
--#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) \
--    && !defined(MODULE)
-+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
-+   !defined(MODULE)
- static unsigned long break_pressed; /* break, really ... */
- #endif
- 
-@@ -196,7 +198,6 @@
- /*
-  * Debugging.
-  */
--#undef SERIAL_DEBUG_INTR
- #undef SERIAL_DEBUG_OPEN
- #undef SERIAL_DEBUG_FLOW
- #undef SERIAL_DEBUG_THROTTLE
-@@ -221,10 +222,6 @@
- static struct termios *serial_termios[NUM_CHANNELS];
- static struct termios *serial_termios_locked[NUM_CHANNELS];
- 
--#ifndef MIN
--#define MIN(a,b)	((a) < (b) ? (a) : (b))
--#endif
--
- /*
-  * tmp_buf is used as a temporary buffer by serial_write.  We need to
-  * lock it in case the copy_from_user blocks while swapping in a page,
-@@ -386,8 +383,6 @@
-  * -----------------------------------------------------------------------
-  */
- 
--static int tty_break;	/* Set whenever BREAK condition is detected.  */
--
- /*
-  * This routine is used by the interrupt handler to schedule
-  * processing in the software interrupt portion of the driver.
-@@ -414,20 +409,15 @@
- 		if (!tty && (!info->hook || !info->hook->rx_char))
- 			continue;
- 
--		if (tty_break) {
--			tty_break = 0;
--#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE)
--			if (info->line == sercons.index) {
--				if (!break_pressed) {
--					break_pressed = jiffies;
--					goto ignore_char;
--				}
--				break_pressed = 0;
--			}
--#endif
-+		flag = TTY_NORMAL;
-+		if (info->tty_break) {
-+			info->tty_break = 0;
- 			flag = TTY_BREAK;
- 			if (info->flags & ZILOG_SAK)
- 				do_SAK(tty);
-+			/* Ignore the null char got when BREAK is removed.  */
-+			if (ch == 0)
-+				continue;
- 		} else {
- 			if (stat & Rx_OVR) {
- 				flag = TTY_OVERRUN;
-@@ -435,20 +425,22 @@
- 				flag = TTY_FRAME;
- 			} else if (stat & PAR_ERR) {
- 				flag = TTY_PARITY;
--			} else
--				flag = 0;
--			if (flag)
-+			}
-+			if (flag != TTY_NORMAL)
- 				/* reset the error indication */
- 				write_zsreg(info->zs_channel, R0, ERR_RES);
- 		}
- 
--#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE)
-+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
-+   !defined(MODULE)
- 		if (break_pressed && info->line == sercons.index) {
--			if (ch != 0 &&
--			    time_before(jiffies, break_pressed + HZ*5)) {
-+			/* Ignore the null char got when BREAK is removed.  */
-+			if (ch == 0)
-+				continue;
-+			if (time_before(jiffies, break_pressed + HZ * 5)) {
- 				handle_sysrq(ch, regs, NULL, NULL);
- 				break_pressed = 0;
--				goto ignore_char;
-+				continue;
- 			}
- 			break_pressed = 0;
- 		}
-@@ -459,23 +451,7 @@
- 			return;
-   		}
- 
--		if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
--			static int flip_buf_ovf;
--			++flip_buf_ovf;
--			continue;
--		}
--		tty->flip.count++;
--		{
--			static int flip_max_cnt;
--			if (flip_max_cnt < tty->flip.count)
--				flip_max_cnt = tty->flip.count;
--		}
--
--		*tty->flip.flag_buf_ptr++ = flag;
--		*tty->flip.char_buf_ptr++ = ch;
--#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE)
--	ignore_char:
--#endif
-+		tty_insert_flip_char(tty, ch, flag);
- 	}
- 	if (tty)
- 		tty_flip_buffer_push(tty);
-@@ -517,11 +493,15 @@
- 	/* Get status from Read Register 0 */
- 	stat = read_zsreg(info->zs_channel, R0);
- 
--	if (stat & BRK_ABRT) {
--#ifdef SERIAL_DEBUG_INTR
--		printk("handling break....");
-+	if ((stat & BRK_ABRT) && !(info->read_reg_zero & BRK_ABRT)) {
-+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
-+   !defined(MODULE)
-+		if (info->line == sercons.index) {
-+			if (!break_pressed)
-+				break_pressed = jiffies;
-+		} else
- #endif
--		tty_break = 1;
-+			info->tty_break = 1;
- 	}
- 
- 	if (info->zs_channel != info->zs_chan_a) {
-@@ -957,7 +937,7 @@
- 	save_flags(flags);
- 	while (1) {
- 		cli();
--		c = MIN(count, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
-+		c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- 				   SERIAL_XMIT_SIZE - info->xmit_head));
- 		if (c <= 0)
- 			break;
-@@ -965,7 +945,7 @@
- 		if (from_user) {
- 			down(&tmp_buf_sem);
- 			copy_from_user(tmp_buf, buf, c);
--			c = MIN(c, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
-+			c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- 				       SERIAL_XMIT_SIZE - info->xmit_head));
- 			memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
- 			up(&tmp_buf_sem);
-@@ -1282,46 +1262,48 @@
- 	}
- 
- 	switch (cmd) {
--		case TIOCMGET:
--			error = verify_area(VERIFY_WRITE, (void *) arg,
--				sizeof(unsigned int));
--			if (error)
--				return error;
--			return get_modem_info(info, (unsigned int *) arg);
--		case TIOCMBIS:
--		case TIOCMBIC:
--		case TIOCMSET:
--			return set_modem_info(info, cmd, (unsigned int *) arg);
--		case TIOCGSERIAL:
--			error = verify_area(VERIFY_WRITE, (void *) arg,
--						sizeof(struct serial_struct));
--			if (error)
--				return error;
--			return get_serial_info(info,
--					       (struct serial_struct *) arg);
--		case TIOCSSERIAL:
--			return set_serial_info(info,
--					       (struct serial_struct *) arg);
--		case TIOCSERGETLSR: /* Get line status register */
--			error = verify_area(VERIFY_WRITE, (void *) arg,
--				sizeof(unsigned int));
--			if (error)
--				return error;
--			else
--			    return get_lsr_info(info, (unsigned int *) arg);
-+	case TIOCMGET:
-+		error = verify_area(VERIFY_WRITE, (void *)arg,
-+				    sizeof(unsigned int));
-+		if (error)
-+			return error;
-+		return get_modem_info(info, (unsigned int *)arg);
- 
--		case TIOCSERGSTRUCT:
--			error = verify_area(VERIFY_WRITE, (void *) arg,
--						sizeof(struct dec_serial));
--			if (error)
--				return error;
--			copy_from_user((struct dec_serial *) arg,
--				       info, sizeof(struct dec_serial));
--			return 0;
-+	case TIOCMBIS:
-+	case TIOCMBIC:
-+	case TIOCMSET:
-+		return set_modem_info(info, cmd, (unsigned int *)arg);
- 
--		default:
--			return -ENOIOCTLCMD;
--		}
-+	case TIOCGSERIAL:
-+		error = verify_area(VERIFY_WRITE, (void *)arg,
-+				    sizeof(struct serial_struct));
-+		if (error)
-+			return error;
-+		return get_serial_info(info, (struct serial_struct *)arg);
-+
-+	case TIOCSSERIAL:
-+		return set_serial_info(info, (struct serial_struct *)arg);
-+
-+	case TIOCSERGETLSR:			/* Get line status register */
-+		error = verify_area(VERIFY_WRITE, (void *)arg,
-+				    sizeof(unsigned int));
-+		if (error)
-+			return error;
-+		else
-+			return get_lsr_info(info, (unsigned int *)arg);
-+
-+	case TIOCSERGSTRUCT:
-+		error = verify_area(VERIFY_WRITE, (void *)arg,
-+				    sizeof(struct dec_serial));
-+		if (error)
-+			return error;
-+		copy_from_user((struct dec_serial *)arg, info,
-+			       sizeof(struct dec_serial));
-+		return 0;
-+
-+	default:
-+		return -ENOIOCTLCMD;
-+	}
- 	return 0;
- }
- 
-@@ -1446,7 +1428,8 @@
- static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
- {
- 	struct dec_serial *info = (struct dec_serial *) tty->driver_data;
--	unsigned long orig_jiffies, char_time;
-+	unsigned long orig_jiffies;
-+	int char_time;
- 
- 	if (serial_paranoia_check(info, tty->device, "rs_wait_until_sent"))
- 		return;
-@@ -1462,7 +1445,7 @@
- 	if (char_time == 0)
- 		char_time = 1;
- 	if (timeout)
--		char_time = MIN(char_time, timeout);
-+		char_time = min(char_time, timeout);
- 	while ((read_zsreg(info->zs_channel, 1) & Tx_BUF_EMP) == 0) {
- 		current->state = TASK_INTERRUPTIBLE;
- 		schedule_timeout(char_time);
-@@ -1714,7 +1697,7 @@
- 
- static void __init show_serial_version(void)
- {
--	printk("DECstation Z8530 serial driver version 0.08\n");
-+	printk("DECstation Z8530 serial driver version 0.09\n");
- }
- 
- /*  Initialize Z8530s zs_channels
-@@ -1994,8 +1977,9 @@
-  * polling I/O routines
-  */
- static int
--zs_poll_tx_char(struct dec_serial *info, unsigned char ch)
-+zs_poll_tx_char(void *handle, unsigned char ch)
- {
-+	struct dec_serial *info = handle;
- 	struct dec_zschannel *chan = info->zs_channel;
- 	int    ret;
- 
-@@ -2017,8 +2001,9 @@
- }
- 
- static int
--zs_poll_rx_char(struct dec_serial *info)
-+zs_poll_rx_char(void *handle)
- {
-+	struct dec_serial *info = handle;
-         struct dec_zschannel *chan = info->zs_channel;
-         int    ret;
- 
-@@ -2038,12 +2023,13 @@
- 		return -ENODEV;
- }
- 
--unsigned int register_zs_hook(unsigned int channel, struct zs_hook *hook)
-+int register_zs_hook(unsigned int channel, struct dec_serial_hook *hook)
- {
- 	struct dec_serial *info = &zs_soft[channel];
- 
- 	if (info->hook) {
--		printk(__FUNCTION__": line %d has already a hook registered\n", channel);
-+		printk("%s: line %d has already a hook registered\n",
-+		       __FUNCTION__, channel);
- 
- 		return 0;
- 	} else {
-@@ -2055,7 +2041,7 @@
- 	}
- }
- 
--unsigned int unregister_zs_hook(unsigned int channel)
-+int unregister_zs_hook(unsigned int channel)
- {
- 	struct dec_serial *info = &zs_soft[channel];
- 
-@@ -2063,8 +2049,8 @@
-                 info->hook = NULL;
-                 return 1;
-         } else {
--                printk(__FUNCTION__": trying to unregister hook on line %d,"
--                       " but none is registered\n", channel);
-+                printk("%s: trying to unregister hook on line %d,"
-+                       " but none is registered\n", __FUNCTION__, channel);
-                 return 0;
-         }
- }
-@@ -2319,22 +2305,23 @@
- 	write_zsreg(chan, 9, nine);
- }
- 
--static int kgdbhook_init_channel(struct dec_serial* info)
-+static int kgdbhook_init_channel(void *handle)
- {
- 	return 0;
- }
- 
--static void kgdbhook_init_info(struct dec_serial* info)
-+static void kgdbhook_init_info(void *handle)
- {
- }
- 
--static void kgdbhook_rx_char(struct dec_serial* info,
--			     unsigned char ch, unsigned char stat)
-+static void kgdbhook_rx_char(void *handle, unsigned char ch, unsigned char fl)
- {
-+	struct dec_serial *info = handle;
-+
-+	if (fl != TTY_NORMAL)
-+		return;
- 	if (ch == 0x03 || ch == '$')
- 		breakpoint();
--	if (stat & (Rx_OVR|FRM_ERR|PAR_ERR))
--		write_zsreg(info->zs_channel, 0, ERR_RES);
- }
- 
- /* This sets up the serial port we're using, and turns on
-@@ -2360,11 +2347,11 @@
-  * for /dev/ttyb which is determined in setup_arch() from the
-  * boot command line flags.
-  */
--struct zs_hook zs_kgdbhook = {
--	init_channel : kgdbhook_init_channel,
--	init_info    : kgdbhook_init_info,
--	cflags       : B38400|CS8|CLOCAL,
--	rx_char      : kgdbhook_rx_char,
-+struct dec_serial_hook zs_kgdbhook = {
-+	.init_channel	= kgdbhook_init_channel,
-+	.init_info	= kgdbhook_init_info,
-+	.rx_char	= kgdbhook_rx_char,
-+	.cflags		= B38400 | CS8 | CLOCAL,
- }
- 
- void __init zs_kgdb_hook(int tty_num)
-diff -Nur linux-2.4.32-rc1/drivers/tc/zs.h linux-2.4.32-rc1.mips/drivers/tc/zs.h
---- linux-2.4.32-rc1/drivers/tc/zs.h	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/tc/zs.h	2004-07-01 15:28:54.000000000 +0200
-@@ -1,14 +1,18 @@
- /*
-- * macserial.h: Definitions for the Macintosh Z8530 serial driver.
-+ * drivers/tc/zs.h: Definitions for the DECstation Z85C30 serial driver.
-  *
-  * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras.
-+ * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen.
-  *
-  * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
-  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-+ * Copyright (C) 2004  Maciej W. Rozycki
-  */
- #ifndef _DECSERIAL_H
- #define _DECSERIAL_H
- 
-+#include <asm/dec/serial.h>
-+
- #define NUM_ZSREGS    16
- 
- struct serial_struct {
-@@ -89,63 +93,50 @@
- 	unsigned char curregs[NUM_ZSREGS];
- };
- 
--struct dec_serial;
--
--struct zs_hook {
--	int (*init_channel)(struct dec_serial* info);
--	void (*init_info)(struct dec_serial* info);
--	void (*rx_char)(unsigned char ch, unsigned char stat);
--	int  (*poll_rx_char)(struct dec_serial* info);
--	int  (*poll_tx_char)(struct dec_serial* info,
--			     unsigned char ch);
--	unsigned cflags;
--};
--
- struct dec_serial {
--	struct dec_serial *zs_next;	/* For IRQ servicing chain */
--	struct dec_zschannel *zs_channel; /* Channel registers */
--	struct dec_zschannel *zs_chan_a;	/* A side registers */
--	unsigned char read_reg_zero;
--
--	char soft_carrier;  /* Use soft carrier on this channel */
--	char break_abort;   /* Is serial console in, so process brk/abrt */
--	struct zs_hook *hook;  /* Hook on this channel */
--	char is_cons;       /* Is this our console. */
--	unsigned char tx_active; /* character is being xmitted */
--	unsigned char tx_stopped; /* output is suspended */
--
--	/* We need to know the current clock divisor
--	 * to read the bps rate the chip has currently
--	 * loaded.
-+	struct dec_serial	*zs_next;	/* For IRQ servicing chain.  */
-+	struct dec_zschannel	*zs_channel;	/* Channel registers.  */
-+	struct dec_zschannel	*zs_chan_a;	/* A side registers.  */
-+	unsigned char		read_reg_zero;
-+
-+	struct dec_serial_hook	*hook;		/* Hook on this channel.  */
-+	int			tty_break;	/* Set on BREAK condition.  */
-+	int			is_cons;	/* Is this our console.  */
-+	int			tx_active;	/* Char is being xmitted.  */
-+	int			tx_stopped;	/* Output is suspended.  */
-+
-+	/*
-+	 * We need to know the current clock divisor
-+	 * to read the bps rate the chip has currently loaded.
- 	 */
--	unsigned char clk_divisor;  /* May be 1, 16, 32, or 64 */
--	int zs_baud;
-+	int			clk_divisor;	/* May be 1, 16, 32, or 64.  */
-+	int			zs_baud;
- 
--	char change_needed;
-+	char			change_needed;
- 
- 	int			magic;
- 	int			baud_base;
- 	int			port;
- 	int			irq;
--	int			flags; 		/* defined in tty.h */
--	int			type; 		/* UART type */
-+	int			flags; 		/* Defined in tty.h.  */
-+	int			type; 		/* UART type.  */
- 	struct tty_struct 	*tty;
- 	int			read_status_mask;
- 	int			ignore_status_mask;
- 	int			timeout;
- 	int			xmit_fifo_size;
- 	int			custom_divisor;
--	int			x_char;	/* xon/xoff character */
-+	int			x_char;		/* XON/XOFF character.  */
- 	int			close_delay;
- 	unsigned short		closing_wait;
- 	unsigned short		closing_wait2;
- 	unsigned long		event;
- 	unsigned long		last_active;
- 	int			line;
--	int			count;	    /* # of fd on device */
--	int			blocked_open; /* # of blocked opens */
--	long			session; /* Session of opening process */
--	long			pgrp; /* pgrp of opening process */
-+	int			count;		/* # of fds on device.  */
-+	int			blocked_open;	/* # of blocked opens.  */
-+	long			session;	/* Sess of opening process.  */
-+	long			pgrp;		/* Pgrp of opening process.  */
- 	unsigned char 		*xmit_buf;
- 	int			xmit_head;
- 	int			xmit_tail;
-diff -Nur linux-2.4.32-rc1/drivers/video/au1200fb.c linux-2.4.32-rc1.mips/drivers/video/au1200fb.c
---- linux-2.4.32-rc1/drivers/video/au1200fb.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/video/au1200fb.c	2005-03-13 09:04:16.000000000 +0100
-@@ -0,0 +1,1564 @@
-+/*
-+ * BRIEF MODULE DESCRIPTION
-+ *	Au1200 LCD Driver.
-+ *
-+ * Copyright 2004 AMD
-+ * Author: AMD
-+ *
-+ * Based on:
-+ * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
-+ *  Created 28 Dec 1997 by Geert Uytterhoeven
-+ *
-+ *  This program is free software; you can redistribute	 it and/or modify it
-+ *  under  the terms of	 the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the	License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
-+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
-+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/tty.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+
-+#include <asm/au1000.h>
-+#include <asm/au1xxx_gpio.h>
-+#include "au1200fb.h"
-+
-+#include <video/fbcon.h>
-+#include <video/fbcon-cfb16.h>
-+#include <video/fbcon-cfb32.h>
-+#define CMAPSIZE 16
-+
-+#define AU1200_LCD_GET_WINENABLE	1
-+#define AU1200_LCD_SET_WINENABLE	2
-+#define AU1200_LCD_GET_WINLOCATION	3
-+#define AU1200_LCD_SET_WINLOCATION	4
-+#define AU1200_LCD_GET_WINSIZE		5
-+#define AU1200_LCD_SET_WINSIZE		6
-+#define AU1200_LCD_GET_BACKCOLOR	7
-+#define AU1200_LCD_SET_BACKCOLOR	8
-+#define AU1200_LCD_GET_COLORKEY	9
-+#define AU1200_LCD_SET_COLORKEY	10
-+#define AU1200_LCD_GET_PANEL		11
-+#define AU1200_LCD_SET_PANEL		12
-+
-+typedef struct au1200_lcd_getset_t
-+{
-+	unsigned int subcmd;
-+	union {
-+		struct {
-+			int enable;
-+		} winenable;
-+		struct {
-+			int x, y;
-+		} winlocation;
-+		struct {
-+			int hsz, vsz;
-+		} winsize;
-+		struct {
-+			unsigned int color;
-+		} backcolor;
-+		struct {
-+			unsigned int key;
-+			unsigned int mask;
-+		} colorkey;
-+		struct {
-+			int panel;
-+			char desc[80];
-+		} panel;
-+	};
-+} au1200_lcd_getset_t;
-+
-+AU1200_LCD *lcd = (AU1200_LCD *)AU1200_LCD_ADDR;
-+static int window_index = 0; /* default is zero */
-+static int panel_index = -1; /* default is call board_au1200fb_panel */
-+
-+struct window_settings
-+{
-+	unsigned char name[64];
-+	uint32 mode_backcolor;
-+	uint32 mode_colorkey;
-+	uint32 mode_colorkeymsk;
-+	struct
-+	{
-+		int xres;
-+		int yres;
-+		int xpos;
-+		int ypos;
-+		uint32 mode_winctrl1; /* winctrl1[FRM,CCO,PO,PIPE] */
-+		uint32 mode_winenable;
-+	} w[4];
-+};
-+
-+struct panel_settings
-+{
-+	unsigned char name[64];
-+	/* panel physical dimensions */
-+	uint32 Xres;
-+	uint32 Yres;
-+	/* panel timings */
-+	uint32 mode_screen;
-+	uint32 mode_horztiming;
-+	uint32 mode_verttiming;
-+	uint32 mode_clkcontrol;
-+	uint32 mode_pwmdiv;
-+	uint32 mode_pwmhi;
-+	uint32 mode_outmask;
-+	uint32 mode_fifoctrl;
-+	uint32 mode_toyclksrc;
-+	uint32 mode_backlight;
-+	uint32 mode_auxpll;
-+	int (*device_init)(void);
-+	int (*device_shutdown)(void);
-+};
-+
-+#if defined(__BIG_ENDIAN)
-+#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_00
-+#else
-+#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_01
-+#endif
-+
-+extern int board_au1200fb_panel (void);
-+extern int board_au1200fb_panel_init (void);
-+extern int board_au1200fb_panel_shutdown (void);
-+
-+#if defined(CONFIG_FOCUS_ENHANCEMENTS)
-+extern int board_au1200fb_focus_init_hdtv(void);
-+extern int board_au1200fb_focus_init_component(void);
-+extern int board_au1200fb_focus_init_cvsv(void);
-+extern int board_au1200fb_focus_shutdown(void);
-+#endif
-+
-+/*
-+ * Default window configurations
-+ */
-+static struct window_settings windows[] =
-+{
-+	{ /* Index 0 */
-+		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
-+		/* mode_backcolor	*/ 0x006600ff,
-+		/* mode_colorkey,msk*/ 0, 0,
-+		{
-+			{
-+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
-+			/* mode_winenable*/ LCD_WINENABLE_WEN0,
-+			},
-+			{
-+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
-+			/* mode_winenable*/ 0,
-+			},
-+			{
-+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
-+			/* mode_winenable*/ 0,
-+			},
-+			{
-+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
-+			/* mode_winenable*/ 0,
-+			},
-+		},
-+	},
-+
-+	{ /* Index 1 */
-+		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
-+		/* mode_backcolor	*/ 0x006600ff,
-+		/* mode_colorkey,msk*/ 0, 0,
-+		{
-+			{
-+			/* xres, yres, xpos, ypos */ 320, 240, 5, 5,
-+#if 0
-+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
-+#endif
-+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_24BPP|LCD_WINCTRL1_PO_00,
-+			/* mode_winenable*/ LCD_WINENABLE_WEN0,
-+			},
-+			{
-+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
-+			/* mode_winenable*/ 0,
-+			},
-+			{
-+			/* xres, yres, xpos, ypos */ 100, 100, 0, 0,
-+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
-+			/* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
-+			},
-+			{
-+			/* xres, yres, xpos, ypos */ 200, 25, 0, 0,
-+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
-+			/* mode_winenable*/ 0,
-+			},
-+		},
-+	},
-+	/* Need VGA 640 @ 24bpp, @ 32bpp */
-+	/* Need VGA 800 @ 24bpp, @ 32bpp */
-+	/* Need VGA 1024 @ 24bpp, @ 32bpp */
-+} ;
-+
-+/*
-+ * Controller configurations for various panels.
-+ */
-+static struct panel_settings panels[] =
-+{
-+	{ /* Index 0: QVGA 320x240 H:33.3kHz V:110Hz */
-+		"VGA_320x240",
-+		320, 240,
-+		/* mode_screen 		*/ LCD_SCREEN_SX_N(320) | LCD_SCREEN_SY_N(240),
-+		/* mode_horztiming	*/ 0x00c4623b,
-+		/* mode_verttiming	*/ 0x00502814,
-+		/* mode_clkcontrol	*/ 0x00020002, /* /4=24Mhz */
-+		/* mode_pwmdiv		*/ 0x00000000,
-+		/* mode_pwmhi		*/ 0x00000000,
-+		/* mode_outmask		*/ 0x00FFFFFF,
-+		/* mode_fifoctrl	*/ 0x2f2f2f2f,
-+		/* mode_toyclksrc   */ 0x00000004, /* 96MHz AUXPLL directly */
-+		/* mode_backlight   */ 0x00000000,
-+		/* mode_auxpll		*/ 8, /* 96MHz AUXPLL */
-+		/* device_init		*/ NULL,
-+		/* device_shutdown	*/ NULL,
-+	},
-+
-+	{ /* Index 1: VGA 640x480 H:30.3kHz V:58Hz */
-+		"VGA_640x480",
-+		640, 480,
-+		/* mode_screen 		*/ 0x13f9df80,
-+		/* mode_horztiming	*/ 0x003c5859,
-+		/* mode_verttiming	*/ 0x00741201,
-+		/* mode_clkcontrol	*/ 0x00020001, /* /4=24Mhz */
-+		/* mode_pwmdiv		*/ 0x00000000,
-+		/* mode_pwmhi		*/ 0x00000000,
-+		/* mode_outmask		*/ 0x00FFFFFF,
-+		/* mode_fifoctrl	*/ 0x2f2f2f2f,
-+		/* mode_toyclksrc   */ 0x00000004, /* AUXPLL directly */
-+		/* mode_backlight   */ 0x00000000,
-+		/* mode_auxpll		*/ 8, /* 96MHz AUXPLL */
-+		/* device_init		*/ NULL,
-+		/* device_shutdown	*/ NULL,
-+	},
-+
-+	{ /* Index 2: SVGA 800x600 H:46.1kHz V:69Hz */
-+		"SVGA_800x600",
-+		800, 600,
-+		/* mode_screen 		*/ 0x18fa5780,
-+		/* mode_horztiming	*/ 0x00dc7e77,
-+		/* mode_verttiming	*/ 0x00584805,
-+		/* mode_clkcontrol	*/ 0x00020000, /* /2=48Mhz */
-+		/* mode_pwmdiv		*/ 0x00000000,
-+		/* mode_pwmhi		*/ 0x00000000,
-+		/* mode_outmask		*/ 0x00FFFFFF,
-+		/* mode_fifoctrl	*/ 0x2f2f2f2f,
-+		/* mode_toyclksrc   */ 0x00000004, /* AUXPLL directly */
-+		/* mode_backlight   */ 0x00000000,
-+		/* mode_auxpll		*/ 8, /* 96MHz AUXPLL */
-+		/* device_init		*/ NULL,
-+		/* device_shutdown	*/ NULL,
-+	},
-+
-+	{ /* Index 3: XVGA 1024x768 H:56.2kHz V:70Hz */
-+		"XVGA_1024x768",
-+		1024, 768,
-+		/* mode_screen 		*/ 0x1ffaff80,
-+		/* mode_horztiming	*/ 0x007d0e57,
-+		/* mode_verttiming	*/ 0x00740a01,
-+		/* mode_clkcontrol	*/ 0x000A0000, /* /1 */
-+		/* mode_pwmdiv		*/ 0x00000000,
-+		/* mode_pwmhi		*/ 0x00000000,
-+		/* mode_outmask		*/ 0x00FFFFFF,
-+		/* mode_fifoctrl	*/ 0x2f2f2f2f,
-+		/* mode_toyclksrc   */ 0x00000004, /* AUXPLL directly */
-+		/* mode_backlight   */ 0x00000000,
-+		/* mode_auxpll		*/ 6, /* 72MHz AUXPLL */
-+		/* device_init		*/ NULL,
-+		/* device_shutdown	*/ NULL,
-+	},
-+
-+	{ /* Index 4: XVGA 1280x1024 H:68.5kHz V:65Hz */
-+		"XVGA_1280x1024",
-+		1280, 1024,
-+		/* mode_screen 		*/ 0x27fbff80,
-+		/* mode_horztiming	*/ 0x00cdb2c7,
-+		/* mode_verttiming	*/ 0x00600002,
-+		/* mode_clkcontrol	*/ 0x000A0000, /* /1 */
-+		/* mode_pwmdiv		*/ 0x00000000,
-+		/* mode_pwmhi		*/ 0x00000000,
-+		/* mode_outmask		*/ 0x00FFFFFF,
-+		/* mode_fifoctrl	*/ 0x2f2f2f2f,
-+		/* mode_toyclksrc   */ 0x00000004, /* AUXPLL directly */
-+		/* mode_backlight   */ 0x00000000,
-+		/* mode_auxpll		*/ 10, /* 120MHz AUXPLL */
-+		/* device_init		*/ NULL,
-+		/* device_shutdown	*/ NULL,
-+	},
-+
-+	{ /* Index 5: Samsung 1024x768 TFT */
-+		"Samsung_1024x768_TFT",
-+		1024, 768,
-+		/* mode_screen 		*/ 0x1ffaff80,
-+		/* mode_horztiming	*/ 0x018cc677,
-+		/* mode_verttiming	*/ 0x00241217,
-+		/* mode_clkcontrol	*/ 0x00000000, /* SCB 0x1 /4=24Mhz */
-+		/* mode_pwmdiv		*/ 0x8000063f, /* SCB 0x0 */
-+		/* mode_pwmhi		*/ 0x03400000, /* SCB 0x0 */
-+		/* mode_outmask		*/ 0x00fcfcfc,
-+		/* mode_fifoctrl	*/ 0x2f2f2f2f,
-+		/* mode_toyclksrc   */ 0x00000004, /* 96MHz AUXPLL directly */
-+		/* mode_backlight   */ 0x00000000,
-+		/* mode_auxpll		*/ 8, /* 96MHz AUXPLL */
-+		/* device_init		*/ board_au1200fb_panel_init,
-+		/* device_shutdown	*/ board_au1200fb_panel_shutdown,
-+	},
-+
-+	{ /* Index 6: Toshiba 640x480 TFT */
-+		"Toshiba_640x480_TFT",
-+		640, 480,
-+		/* mode_screen 		*/ LCD_SCREEN_SX_N(640) | LCD_SCREEN_SY_N(480),
-+		/* mode_horztiming	*/ LCD_HORZTIMING_HPW_N(96) | LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(51),
-+		/* mode_verttiming	*/ LCD_VERTTIMING_VPW_N(2) | LCD_VERTTIMING_VND1_N(11) | LCD_VERTTIMING_VND2_N(32) ,
-+		/* mode_clkcontrol	*/ 0x00000000, /* /4=24Mhz */
-+		/* mode_pwmdiv		*/ 0x8000063f,
-+		/* mode_pwmhi		*/ 0x03400000,
-+		/* mode_outmask		*/ 0x00fcfcfc,
-+		/* mode_fifoctrl	*/ 0x2f2f2f2f,
-+		/* mode_toyclksrc   */ 0x00000004, /* 96MHz AUXPLL directly */
-+		/* mode_backlight   */ 0x00000000,
-+		/* mode_auxpll		*/ 8, /* 96MHz AUXPLL */
-+		/* device_init		*/ board_au1200fb_panel_init,
-+		/* device_shutdown	*/ board_au1200fb_panel_shutdown,
-+	},
-+
-+	{ /* Index 7: Sharp 320x240 TFT */
-+		"Sharp_320x240_TFT",
-+		320, 240,
-+		/* mode_screen 		*/ LCD_SCREEN_SX_N(320) | LCD_SCREEN_SY_N(240),
-+		/* mode_horztiming	*/ LCD_HORZTIMING_HPW_N(60) | LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(2),
-+		/* mode_verttiming	*/ LCD_VERTTIMING_VPW_N(2) | LCD_VERTTIMING_VND1_N(2) | LCD_VERTTIMING_VND2_N(5) ,
-+		/* mode_clkcontrol	*/ LCD_CLKCONTROL_PCD_N(7), /* /16=6Mhz */
-+		/* mode_pwmdiv		*/ 0x8000063f,
-+		/* mode_pwmhi		*/ 0x03400000,
-+		/* mode_outmask		*/ 0x00fcfcfc,
-+		/* mode_fifoctrl	*/ 0x2f2f2f2f,
-+		/* mode_toyclksrc   */ 0x00000004, /* 96MHz AUXPLL directly */
-+		/* mode_backlight   */ 0x00000000,
-+		/* mode_auxpll		*/ 8, /* 96MHz AUXPLL */
-+		/* device_init		*/ board_au1200fb_panel_init,
-+		/* device_shutdown	*/ board_au1200fb_panel_shutdown,
-+	},
-+	{ /* Index 8: Toppoly TD070WGCB2 7" 854x480 TFT */
-+		"Toppoly_TD070WGCB2",
-+		854, 480,
-+		/* mode_screen 		*/ LCD_SCREEN_SX_N(854) | LCD_SCREEN_SY_N(480),
-+		/* mode_horztiming	*/ LCD_HORZTIMING_HND2_N(44) | LCD_HORZTIMING_HND1_N(44) | LCD_HORZTIMING_HPW_N(114),
-+		/* mode_verttiming	*/ LCD_VERTTIMING_VND2_N(20) | LCD_VERTTIMING_VND1_N(21) | LCD_VERTTIMING_VPW_N(4),
-+		/* mode_clkcontrol	*/ 0x00020001, /* /4=24Mhz */
-+		/* mode_pwmdiv		*/ 0x8000063f,
-+		/* mode_pwmhi		*/ 0x03400000,
-+		/* mode_outmask		*/ 0x00FCFCFC,
-+		/* mode_fifoctrl	*/ 0x2f2f2f2f,
-+		/* mode_toyclksrc   */ 0x00000004, /* AUXPLL directly */
-+		/* mode_backlight   */ 0x00000000,
-+		/* mode_auxpll		*/ 8, /* 96MHz AUXPLL */
-+		/* device_init		*/ board_au1200fb_panel_init,
-+		/* device_shutdown	*/ board_au1200fb_panel_shutdown,
-+	},
-+#if defined(CONFIG_FOCUS_ENHANCEMENTS)
-+	{ /* Index 9: Focus FS453 TV-Out 640x480 */
-+		"FS453_640x480 (Composite/S-Video)",
-+		640, 480,
-+		/* mode_screen 		*/ LCD_SCREEN_SX_N(640) | LCD_SCREEN_SY_N(480),
-+		/* mode_horztiming	*/ LCD_HORZTIMING_HND2_N(143) | LCD_HORZTIMING_HND1_N(143) | LCD_HORZTIMING_HPW_N(10),
-+		/* mode_verttiming	*/ LCD_VERTTIMING_VND2_N(30) | LCD_VERTTIMING_VND1_N(30) | LCD_VERTTIMING_VPW_N(5),
-+		/* mode_clkcontrol	*/ 0x00480000 | (1<<17) | (1<<18), /* External Clock, 1:1 clock ratio */
-+		/* mode_pwmdiv		*/ 0x00000000,
-+		/* mode_pwmhi		*/ 0x00000000,
-+		/* mode_outmask		*/ 0x00FFFFFF,
-+		/* mode_fifoctrl	*/ 0x2f2f2f2f,
-+		/* mode_toyclksrc   */ 0x00000000,
-+		/* mode_backlight   */ 0x00000000,
-+		/* mode_auxpll		*/ 8, /* 96MHz AUXPLL */
-+		/* device_init		*/ board_au1200fb_focus_init_cvsv,
-+		/* device_shutdown	*/ board_au1200fb_focus_shutdown,
-+	},
-+	
-+	{ /* Index 10: Focus FS453 TV-Out 640x480 */
-+		"FS453_640x480 (Component Video)",
-+		640, 480,
-+		/* mode_screen 		*/ LCD_SCREEN_SX_N(640) | LCD_SCREEN_SY_N(480),
-+		/* mode_horztiming	*/ LCD_HORZTIMING_HND2_N(143) | LCD_HORZTIMING_HND1_N(143) | LCD_HORZTIMING_HPW_N(10),
-+		/* mode_verttiming	*/ LCD_VERTTIMING_VND2_N(30) | LCD_VERTTIMING_VND1_N(30) | LCD_VERTTIMING_VPW_N(5),
-+		/* mode_clkcontrol	*/ 0x00480000 | (1<<17) | (1<<18), /* External Clock, 1:1 clock ratio */
-+		/* mode_pwmdiv		*/ 0x00000000,
-+		/* mode_pwmhi		*/ 0x00000000,
-+		/* mode_outmask		*/ 0x00FFFFFF,
-+		/* mode_fifoctrl	*/ 0x2f2f2f2f,
-+		/* mode_toyclksrc   */ 0x00000000,
-+		/* mode_backlight   */ 0x00000000,
-+		/* mode_auxpll		*/ 8, /* 96MHz AUXPLL */
-+		/* device_init		*/ board_au1200fb_focus_init_component,
-+		/* device_shutdown	*/ board_au1200fb_focus_shutdown,
-+	},
-+	
-+	{ /* Index 11: Focus FS453 TV-Out 640x480 */
-+		"FS453_640x480 (HDTV)",
-+		720, 480,
-+		/* mode_screen 		*/ LCD_SCREEN_SX_N(720) | LCD_SCREEN_SY_N(480),
-+		/* mode_horztiming	*/ LCD_HORZTIMING_HND2_N(28) | LCD_HORZTIMING_HND1_N(46) | LCD_HORZTIMING_HPW_N(64),
-+		/* mode_verttiming	*/ LCD_VERTTIMING_VND2_N(7) | LCD_VERTTIMING_VND1_N(31) | LCD_VERTTIMING_VPW_N(7),
-+		/* mode_clkcontrol	*/ 0x00480000 | (1<<17) | (1<<18), /* External Clock, 1:1 clock ratio */
-+		/* mode_pwmdiv		*/ 0x00000000,
-+		/* mode_pwmhi		*/ 0x00000000,
-+		/* mode_outmask		*/ 0x00FFFFFF,
-+		/* mode_fifoctrl	*/ 0x2f2f2f2f,
-+		/* mode_toyclksrc   */ 0x00000000,
-+		/* mode_backlight   */ 0x00000000,
-+		/* mode_auxpll		*/ 8, /* 96MHz AUXPLL */
-+		/* device_init		*/ board_au1200fb_focus_init_hdtv,
-+		/* device_shutdown	*/ board_au1200fb_focus_shutdown,
-+	},
-+#endif
-+};
-+
-+#define NUM_PANELS (sizeof(panels) / sizeof(struct panel_settings))
-+
-+static struct window_settings *win;
-+static struct panel_settings *panel;
-+
-+struct au1200fb_info {
-+	struct fb_info_gen gen;
-+	unsigned long fb_virt_start;
-+	unsigned long fb_size;
-+	unsigned long fb_phys;
-+	int mmaped;
-+	int nohwcursor;
-+	int noblanking;
-+
-+	struct { unsigned red, green, blue, pad; } palette[256];
-+
-+#if defined(FBCON_HAS_CFB16)
-+	u16 fbcon_cmap16[16];
-+#endif
-+#if defined(FBCON_HAS_CFB32)
-+	u32 fbcon_cmap32[16];
-+#endif
-+};
-+
-+
-+struct au1200fb_par {
-+    struct fb_var_screeninfo var;
-+	
-+	int line_length;  /* in bytes */
-+	int cmap_len;     /* color-map length */
-+};
-+
-+#ifndef CONFIG_FB_AU1200_DEVS
-+#define CONFIG_FB_AU1200_DEVS 1
-+#endif
-+
-+static struct au1200fb_info fb_infos[CONFIG_FB_AU1200_DEVS];
-+static struct au1200fb_par fb_pars[CONFIG_FB_AU1200_DEVS];
-+static struct display disps[CONFIG_FB_AU1200_DEVS];
-+
-+int au1200fb_init(void);
-+void au1200fb_setup(char *options, int *ints);
-+static int au1200fb_mmap(struct fb_info *fb, struct file *file, 
-+		struct vm_area_struct *vma);
-+static int au1200_blank(int blank_mode, struct fb_info_gen *info);
-+static int au1200fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
-+			  u_long arg, int con, struct fb_info *info);
-+
-+void au1200_nocursor(struct display *p, int mode, int xx, int yy){};
-+
-+static int au1200_setlocation (int plane, int xpos, int ypos);
-+static int au1200_setsize (int plane, int xres, int yres);
-+static void au1200_setmode(int plane);
-+static void au1200_setpanel (struct panel_settings *newpanel);
-+
-+static struct fb_ops au1200fb_ops = {
-+	owner:		THIS_MODULE,
-+	fb_get_fix:	fbgen_get_fix,
-+	fb_get_var:	fbgen_get_var,
-+	fb_set_var:	fbgen_set_var,
-+	fb_get_cmap:	fbgen_get_cmap,
-+	fb_set_cmap:	fbgen_set_cmap,
-+	fb_pan_display: fbgen_pan_display,
-+        fb_ioctl:       au1200fb_ioctl,
-+	fb_mmap:        au1200fb_mmap,
-+};
-+
-+
-+static int
-+winbpp (unsigned int winctrl1)
-+{
-+	/* how many bytes of memory are needed for each pixel format */
-+	switch (winctrl1 & LCD_WINCTRL1_FRM)
-+	{
-+		case LCD_WINCTRL1_FRM_1BPP: return 1; break;
-+		case LCD_WINCTRL1_FRM_2BPP: return 2; break;
-+		case LCD_WINCTRL1_FRM_4BPP: return 4; break;
-+		case LCD_WINCTRL1_FRM_8BPP: return 8; break;
-+		case LCD_WINCTRL1_FRM_12BPP: return 16; break;
-+		case LCD_WINCTRL1_FRM_16BPP655: return 16; break;
-+		case LCD_WINCTRL1_FRM_16BPP565: return 16; break;
-+		case LCD_WINCTRL1_FRM_16BPP556: return 16; break;
-+		case LCD_WINCTRL1_FRM_16BPPI1555: return 16; break;
-+		case LCD_WINCTRL1_FRM_16BPPI5551: return 16; break;
-+		case LCD_WINCTRL1_FRM_16BPPA1555: return 16; break;
-+		case LCD_WINCTRL1_FRM_16BPPA5551: return 16; break;
-+		case LCD_WINCTRL1_FRM_24BPP: return 32; break;
-+		case LCD_WINCTRL1_FRM_32BPP: return 32; break;
-+		default: return 0; break;
-+	}
-+}
-+
-+static int
-+fbinfo2index (struct fb_info *fb_info)
-+{
-+	int i;
-+	for (i = 0; i < CONFIG_FB_AU1200_DEVS; ++i)
-+	{
-+		if (fb_info == (struct fb_info *)(&fb_infos[i]))
-+			return i;
-+	}
-+	printk("au1200fb: ERROR: fbinfo2index failed!\n");
-+	return -1;
-+}
-+
-+static void au1200_detect(void)
-+{
-+	/*
-+	 *  This function should detect the current video mode settings 
-+	 *  and store it as the default video mode
-+	 * Yeh, well, we're not going to change any settings so we're
-+	 * always stuck with the default ...
-+	 */
-+}
-+
-+static int au1200_encode_fix(struct fb_fix_screeninfo *fix, 
-+		const void *_par, struct fb_info_gen *_info)
-+{
-+    struct au1200fb_info *info = (struct au1200fb_info *) _info;
-+    struct au1200fb_par *par = (struct au1200fb_par *) _par;
-+	int plane;
-+
-+	plane = fbinfo2index(info);
-+
-+	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
-+
-+	fix->smem_start = info->fb_phys;
-+	fix->smem_len = info->fb_size;
-+	fix->type = FB_TYPE_PACKED_PIXELS;
-+	fix->type_aux = 0;
-+        fix->visual = (par->var.bits_per_pixel == 8) ?
-+	       	FB_VISUAL_PSEUDOCOLOR	: FB_VISUAL_TRUECOLOR;
-+	fix->ywrapstep = 0;
-+	fix->xpanstep = 1;
-+	fix->ypanstep = 1;
-+	/* FIX!!!! why doesn't par->line_length work???? it does for au1100 */
-+	fix->line_length = fb_pars[plane].line_length; /*par->line_length;*/
-+	return 0;
-+}
-+
-+static void set_color_bitfields(struct fb_var_screeninfo *var, int plane)
-+{
-+	if (var->bits_per_pixel == 8)
-+	{
-+		var->red.offset = 0;
-+		var->red.length = 8;
-+		var->green.offset = 0;
-+		var->green.length = 8;
-+		var->blue.offset = 0;
-+		var->blue.length = 8;
-+		var->transp.offset = 0;
-+		var->transp.length = 0;
-+	}
-+	else
-+	
-+	if (var->bits_per_pixel == 16)
-+	{
-+		/* FIX!!! How does CCO affect this ? */
-+		/* FIX!!! Not exactly sure how many of these work with FB */
-+		switch (win->w[plane].mode_winctrl1 & LCD_WINCTRL1_FRM)
-+		{
-+			case LCD_WINCTRL1_FRM_16BPP655:
-+				var->red.offset = 10;
-+				var->red.length = 6;
-+				var->green.offset = 5;
-+				var->green.length = 5;
-+				var->blue.offset = 0;
-+				var->blue.length = 5;
-+				var->transp.offset = 0;
-+				var->transp.length = 0;
-+				break;
-+
-+			case LCD_WINCTRL1_FRM_16BPP565:
-+				var->red.offset = 11;
-+				var->red.length = 5;
-+				var->green.offset = 5;
-+				var->green.length = 6;
-+				var->blue.offset = 0;
-+				var->blue.length = 5;
-+				var->transp.offset = 0;
-+				var->transp.length = 0;
-+				break;
-+
-+			case LCD_WINCTRL1_FRM_16BPP556:
-+				var->red.offset = 11;
-+				var->red.length = 5;
-+				var->green.offset = 6;
-+				var->green.length = 5;
-+				var->blue.offset = 0;
-+				var->blue.length = 6;
-+				var->transp.offset = 0;
-+				var->transp.length = 0;
-+				break;
-+
-+			case LCD_WINCTRL1_FRM_16BPPI1555:
-+				var->red.offset = 10;
-+				var->red.length = 5;
-+				var->green.offset = 5;
-+				var->green.length = 5;
-+				var->blue.offset = 0;
-+				var->blue.length = 5;
-+				var->transp.offset = 0;
-+				var->transp.length = 0;
-+				break;
-+
-+			case LCD_WINCTRL1_FRM_16BPPI5551:
-+				var->red.offset = 11;
-+				var->red.length = 5;
-+				var->green.offset = 6;
-+				var->green.length = 5;
-+				var->blue.offset = 1;
-+				var->blue.length = 5;
-+				var->transp.offset = 0;
-+				var->transp.length = 0;
-+				break;
-+
-+			case LCD_WINCTRL1_FRM_16BPPA1555:
-+				var->red.offset = 10;
-+				var->red.length = 5;
-+				var->green.offset = 5;
-+				var->green.length = 5;
-+				var->blue.offset = 0;
-+				var->blue.length = 5;
-+				var->transp.offset = 15;
-+				var->transp.length = 1;
-+				break;
-+
-+			case LCD_WINCTRL1_FRM_16BPPA5551:
-+				var->red.offset = 11;
-+				var->red.length = 5;
-+				var->green.offset = 6;
-+				var->green.length = 5;
-+				var->blue.offset = 1;
-+				var->blue.length = 5;
-+				var->transp.offset = 0;
-+				var->transp.length = 1;
-+				break;
-+
-+			default:
-+				printk("ERROR: Invalid PIXEL FORMAT!!!\n"); break;
-+		}
-+	}
-+	else
-+
-+	if (var->bits_per_pixel == 32)
-+	{
-+		switch (win->w[plane].mode_winctrl1 & LCD_WINCTRL1_FRM)
-+		{
-+		case LCD_WINCTRL1_FRM_24BPP:
-+			var->red.offset = 16;
-+			var->red.length = 8;
-+			var->green.offset = 8;
-+			var->green.length = 8;
-+			var->blue.offset = 0;
-+			var->blue.length = 8;
-+			var->transp.offset = 0;
-+			var->transp.length = 0;
-+			break;
-+
-+		case LCD_WINCTRL1_FRM_32BPP:
-+			var->red.offset = 16;
-+			var->red.length = 8;
-+			var->green.offset = 8;
-+			var->green.length = 8;
-+			var->blue.offset = 0;
-+			var->blue.length = 8;
-+			var->transp.offset = 24;
-+			var->transp.length = 8;
-+			break;
-+		}
-+	}
-+	var->red.msb_right = 0;
-+	var->green.msb_right = 0;
-+	var->blue.msb_right = 0;
-+	var->transp.msb_right = 0;
-+#if 0
-+printk("set_color_bitfields(a=%d, r=%d..%d, g=%d..%d, b=%d..%d)\n",
-+	var->transp.offset,
-+	var->red.offset+var->red.length-1, var->red.offset,
-+	var->green.offset+var->green.length-1, var->green.offset,
-+	var->blue.offset+var->blue.length-1, var->blue.offset);
-+#endif
-+}
-+
-+static int au1200_decode_var(const struct fb_var_screeninfo *var, 
-+		void *_par, struct fb_info_gen *_info)
-+{
-+	struct au1200fb_par *par = (struct au1200fb_par *)_par;
-+	int plane, bpp;
-+
-+	plane = fbinfo2index((struct fb_info *)_info);
-+
-+	/*
-+	 * Don't allow setting any of these yet: xres and yres don't
-+	 * make sense for LCD panels.
-+	 */
-+	if (var->xres != win->w[plane].xres ||
-+	    var->yres != win->w[plane].yres ||
-+	    var->xres != win->w[plane].xres ||
-+	    var->yres != win->w[plane].yres) {
-+		return -EINVAL;
-+	}
-+
-+	bpp = winbpp(win->w[plane].mode_winctrl1);
-+	if(var->bits_per_pixel != bpp) {
-+		/* on au1200, window pixel format is independent of panel pixel */
-+		printk("WARNING: bits_per_pizel != panel->bpp\n");
-+	}
-+
-+	memset(par, 0, sizeof(struct au1200fb_par));
-+	par->var = *var;
-+	
-+	/* FIX!!! */
-+	switch (var->bits_per_pixel) {
-+		case 8:
-+			par->var.bits_per_pixel = 8;
-+			break;
-+		case 16:
-+			par->var.bits_per_pixel = 16;
-+			break;
-+		case 24:
-+		case 32:
-+			par->var.bits_per_pixel = 32;
-+			break;
-+		default:
-+			printk("color depth %d bpp not supported\n",
-+					var->bits_per_pixel);
-+			return -EINVAL;
-+
-+	}
-+	set_color_bitfields(&par->var, plane);
-+	/* FIX!!! what is this for 24/32bpp? */
-+	par->cmap_len = (par->var.bits_per_pixel == 8) ? 256 : 16;
-+	return 0;
-+}
-+
-+static int au1200_encode_var(struct fb_var_screeninfo *var, 
-+		const void *par, struct fb_info_gen *_info)
-+{
-+	*var = ((struct au1200fb_par *)par)->var;
-+	return 0;
-+}
-+
-+static void 
-+au1200_get_par(void *_par, struct fb_info_gen *_info)
-+{
-+	int index;
-+
-+	index = fbinfo2index((struct fb_info *)_info);
-+	*(struct au1200fb_par *)_par = fb_pars[index];
-+}
-+
-+static void au1200_set_par(const void *par, struct fb_info_gen *info)
-+{
-+	/* nothing to do: we don't change any settings */
-+}
-+
-+static int au1200_getcolreg(unsigned regno, unsigned *red, unsigned *green,
-+			 unsigned *blue, unsigned *transp,
-+			 struct fb_info *info)
-+{
-+	struct au1200fb_info* i = (struct au1200fb_info*)info;
-+
-+	if (regno > 255)
-+		return 1;
-+   
-+	*red    = i->palette[regno].red; 
-+	*green  = i->palette[regno].green; 
-+	*blue   = i->palette[regno].blue; 
-+	*transp = 0;
-+
-+	return 0;
-+}
-+
-+static int au1200_setcolreg(unsigned regno, unsigned red, unsigned green,
-+			 unsigned blue, unsigned transp,
-+			 struct fb_info *info)
-+{
-+	struct au1200fb_info* i = (struct au1200fb_info *)info;
-+	u32 rgbcol;
-+	int plane, bpp;
-+
-+	plane = fbinfo2index((struct fb_info *)info);
-+	bpp = winbpp(win->w[plane].mode_winctrl1);
-+
-+	if (regno > 255)
-+		return 1;
-+
-+	i->palette[regno].red    = red;
-+	i->palette[regno].green  = green;
-+	i->palette[regno].blue   = blue;
-+   
-+	switch(bpp) {
-+#ifdef FBCON_HAS_CFB8
-+	case 8:
-+		red >>= 10;
-+		green >>= 10;
-+		blue >>= 10;
-+		panel_reg->lcd_pallettebase[regno] = (blue&0x1f) | 
-+			((green&0x3f)<<5) | ((red&0x1f)<<11);
-+		break;
-+#endif
-+#ifdef FBCON_HAS_CFB16
-+/* FIX!!!! depends upon pixel format */
-+	case 16:
-+		i->fbcon_cmap16[regno] =
-+			((red & 0xf800) >> 0) |
-+			((green & 0xfc00) >> 5) |
-+			((blue & 0xf800) >> 11);
-+		break;
-+#endif
-+#ifdef FBCON_HAS_CFB32
-+	case 32:
-+		i->fbcon_cmap32[regno] =
-+            (((u32 )transp & 0xff00) << 16) |
-+            (((u32 )red & 0xff00) << 8) |
-+            (((u32 )green & 0xff00)) |
-+            (((u32 )blue & 0xff00) >> 8);
-+		break;
-+#endif
-+	default:
-+	printk("unsupported au1200_setcolreg(%d)\n", bpp);
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+
-+static int  au1200_blank(int blank_mode, struct fb_info_gen *_info)
-+{
-+	struct au1200fb_info *fb_info = (struct au1200fb_info *)_info;
-+	int plane;
-+
-+	/* Short-circuit screen blanking */
-+	if (fb_info->noblanking)
-+		return 0;
-+
-+	plane = fbinfo2index((struct fb_info *)_info);
-+
-+	switch (blank_mode) {
-+	case VESA_NO_BLANKING:
-+		/* printk("turn on panel\n"); */
-+		au1200_setpanel(panel);
-+		break;
-+
-+	case VESA_VSYNC_SUSPEND:
-+	case VESA_HSYNC_SUSPEND:
-+	case VESA_POWERDOWN:
-+		/* printk("turn off panel\n"); */
-+		au1200_setpanel(NULL);
-+        break;
-+	default: 
-+		break;
-+
-+	}
-+	return 0;
-+}
-+
-+static void au1200_set_disp(const void *unused, struct display *disp,
-+			 struct fb_info_gen *info)
-+{
-+	struct au1200fb_info *fb_info;
-+	int plane;
-+
-+	fb_info = (struct au1200fb_info *)info;
-+
-+	disp->screen_base = (char *)fb_info->fb_virt_start;
-+
-+	switch (disp->var.bits_per_pixel) {
-+#ifdef FBCON_HAS_CFB8
-+	case 8:
-+		disp->dispsw = &fbcon_cfb8;
-+		if (fb_info->nohwcursor)
-+			fbcon_cfb8.cursor = au1200_nocursor;
-+		break;
-+#endif
-+#ifdef FBCON_HAS_CFB16
-+	case 16:
-+		disp->dispsw = &fbcon_cfb16;
-+		disp->dispsw_data = fb_info->fbcon_cmap16;
-+		if (fb_info->nohwcursor)
-+			fbcon_cfb16.cursor = au1200_nocursor;
-+		break;
-+#endif
-+#ifdef FBCON_HAS_CFB32
-+	case 32:
-+		disp->dispsw = &fbcon_cfb32;
-+		disp->dispsw_data = fb_info->fbcon_cmap32;
-+		if (fb_info->nohwcursor)
-+			fbcon_cfb32.cursor = au1200_nocursor;
-+		break;
-+#endif
-+	default:
-+		disp->dispsw = &fbcon_dummy;
-+		disp->dispsw_data = NULL;
-+		break;
-+	}
-+}
-+
-+static int
-+au1200fb_mmap(struct fb_info *_fb,
-+	     struct file *file,
-+	     struct vm_area_struct *vma)
-+{
-+	unsigned int len;
-+	unsigned long start=0, off;
-+
-+	struct au1200fb_info *fb_info = (struct au1200fb_info *)_fb;
-+
-+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
-+		return -EINVAL;
-+	}
-+    
-+	start = fb_info->fb_phys & PAGE_MASK;
-+	len = PAGE_ALIGN((start & ~PAGE_MASK) + fb_info->fb_size);
-+
-+	off = vma->vm_pgoff << PAGE_SHIFT;
-+
-+	if ((vma->vm_end - vma->vm_start + off) > len) {
-+		return -EINVAL;
-+	}
-+
-+	off += start;
-+	vma->vm_pgoff = off >> PAGE_SHIFT;
-+
-+	pgprot_val(vma->vm_page_prot) &= ~_CACHE_MASK;
-+	pgprot_val(vma->vm_page_prot) |= _CACHE_UNCACHED;
-+
-+	/* This is an IO map - tell maydump to skip this VMA */
-+	vma->vm_flags |= VM_IO;
-+    
-+	if (io_remap_page_range(vma->vm_start, off,
-+				vma->vm_end - vma->vm_start,
-+				vma->vm_page_prot)) {
-+		return -EAGAIN;
-+	}
-+
-+	fb_info->mmaped = 1;
-+	return 0;
-+}
-+
-+int au1200_pan_display(const struct fb_var_screeninfo *var,
-+		       struct fb_info_gen *info)
-+{
-+	return 0;
-+}
-+
-+
-+static int au1200fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
-+			  u_long arg, int con, struct fb_info *info)
-+{
-+	int plane;
-+
-+	plane = fbinfo2index(info);
-+
-+	/* printk("au1200fb: ioctl %d on plane %d\n", cmd, plane); */
-+
-+	if (cmd == 0x46FF)
-+	{
-+		au1200_lcd_getset_t iodata;
-+
-+		if (copy_from_user(&iodata, (void *) arg, sizeof(au1200_lcd_getset_t)))
-+			return -EFAULT;
-+
-+		switch (iodata.subcmd)
-+		{
-+			case AU1200_LCD_GET_WINENABLE:
-+				iodata.winenable.enable = (lcd->winenable & (1<<plane)) ? 1 : 0;
-+				break;
-+			case AU1200_LCD_SET_WINENABLE:
-+				{
-+				u32 winenable;
-+				winenable = lcd->winenable;
-+				winenable &= ~(1<<plane);
-+				winenable |= (iodata.winenable.enable) ? (1<<plane) : 0;
-+				lcd->winenable = winenable;
-+				}
-+				break;
-+			case AU1200_LCD_GET_WINLOCATION:
-+				iodata.winlocation.x =
-+					(lcd->window[plane].winctrl0 & LCD_WINCTRL0_OX) >> 21;
-+				iodata.winlocation.y =
-+					(lcd->window[plane].winctrl0 & LCD_WINCTRL0_OY) >> 10;
-+				break;
-+			case AU1200_LCD_SET_WINLOCATION:
-+				au1200_setlocation(plane, iodata.winlocation.x, iodata.winlocation.y);
-+				break;
-+			case AU1200_LCD_GET_WINSIZE:
-+				iodata.winsize.hsz =
-+					(lcd->window[plane].winctrl1 & LCD_WINCTRL1_SZX) >> 11;
-+				iodata.winsize.vsz =
-+					(lcd->window[plane].winctrl0 & LCD_WINCTRL1_SZY) >> 0;
-+				break;
-+			case AU1200_LCD_SET_WINSIZE:
-+				au1200_setsize(plane, iodata.winsize.hsz, iodata.winsize.vsz);
-+				break;
-+			case AU1200_LCD_GET_BACKCOLOR:
-+				iodata.backcolor.color = lcd->backcolor;
-+				break;
-+			case AU1200_LCD_SET_BACKCOLOR:
-+				 lcd->backcolor = iodata.backcolor.color;
-+				break;
-+			case AU1200_LCD_GET_COLORKEY:
-+				iodata.colorkey.key = lcd->colorkey;
-+				iodata.colorkey.mask = lcd->colorkeymsk;
-+				break;
-+			case AU1200_LCD_SET_COLORKEY:
-+				lcd->colorkey = iodata.colorkey.key;
-+				lcd->colorkeymsk = iodata.colorkey.mask;
-+				break;
-+			case AU1200_LCD_GET_PANEL:
-+				iodata.panel.panel = panel_index;
-+				break;
-+			case AU1200_LCD_SET_PANEL:
-+				if ((iodata.panel.panel >= 0) && (iodata.panel.panel < NUM_PANELS))
-+				{
-+					struct panel_settings *newpanel;
-+					panel_index = iodata.panel.panel;
-+					newpanel = &panels[panel_index];
-+					au1200_setpanel(newpanel);
-+				}
-+				break;
-+		}
-+
-+		return copy_to_user((void *) arg, &iodata, sizeof(au1200_lcd_getset_t)) ? -EFAULT : 0;
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+static struct fbgen_hwswitch au1200_switch = {
-+	au1200_detect, 
-+	au1200_encode_fix, 
-+	au1200_decode_var, 
-+	au1200_encode_var, 
-+	au1200_get_par, 
-+	au1200_set_par, 
-+	au1200_getcolreg, 
-+	au1200_setcolreg, 
-+	au1200_pan_display, 
-+	au1200_blank, 
-+	au1200_set_disp
-+};
-+
-+static void au1200_setpanel (struct panel_settings *newpanel)
-+{
-+	/*
-+	 * Perform global setup/init of LCD controller
-+	 */
-+	uint32 winenable;
-+
-+	/* Make sure all windows disabled */
-+	winenable = lcd->winenable;
-+	lcd->winenable = 0;
-+
-+	/*
-+	 * Ensure everything is disabled before reconfiguring
-+	 */
-+	if (lcd->screen & LCD_SCREEN_SEN)
-+	{
-+		/* Wait for vertical sync period */
-+		lcd->intstatus = LCD_INT_SS;
-+		while ((lcd->intstatus & LCD_INT_SS) == 0)
-+			;		
-+		
-+		lcd->screen &= ~LCD_SCREEN_SEN;	/*disable the controller*/
-+		
-+		do
-+		{
-+			lcd->intstatus = lcd->intstatus; /*clear interrupts*/
-+		}
-+		/*wait for controller to shut down*/
-+		while ((lcd->intstatus & LCD_INT_SD) == 0);
-+		
-+		/* Call shutdown of current panel (if up) */
-+		/* this must occur last, because if an external clock is driving
-+		    the controller, the clock cannot be turned off before first
-+			shutting down the controller.
-+		 */
-+		if (panel->device_shutdown != NULL) panel->device_shutdown();
-+	}
-+
-+	/* Check if only needing to turn off panel */
-+	if (panel == NULL) return;
-+
-+	panel = newpanel;
-+	
-+	printk("Panel(%s), %dx%d\n", panel->name, panel->Xres, panel->Yres);
-+
-+	/*
-+	 * Setup clocking if internal LCD clock source (assumes sys_auxpll valid)
-+	 */
-+	if (!(panel->mode_clkcontrol & LCD_CLKCONTROL_EXT))
-+	{
-+		uint32 sys_clksrc;
-+		/* WARNING! This should really be a check since other peripherals can 
-+		   be affected by changins sys_auxpll  */
-+		au_writel(panel->mode_auxpll, SYS_AUXPLL);
-+		sys_clksrc = au_readl(SYS_CLKSRC) & ~0x0000001f; 
-+		sys_clksrc |= panel->mode_toyclksrc;
-+		au_writel(sys_clksrc, SYS_CLKSRC);
-+	}
-+
-+	/*
-+	 * Configure panel timings
-+	 */
-+	lcd->screen = panel->mode_screen;
-+	lcd->horztiming = panel->mode_horztiming;
-+	lcd->verttiming = panel->mode_verttiming;
-+	lcd->clkcontrol = panel->mode_clkcontrol;
-+	lcd->pwmdiv = panel->mode_pwmdiv;
-+	lcd->pwmhi = panel->mode_pwmhi;
-+	lcd->outmask = panel->mode_outmask;
-+	lcd->fifoctrl = panel->mode_fifoctrl;
-+	au_sync();
-+
-+	/* FIX!!! Check window settings to make sure still valid for new geometry */
-+	au1200_setlocation(0, win->w[0].xpos, win->w[0].ypos);
-+	au1200_setlocation(1, win->w[1].xpos, win->w[1].ypos);
-+	au1200_setlocation(2, win->w[2].xpos, win->w[2].ypos);
-+	au1200_setlocation(3, win->w[3].xpos, win->w[3].ypos);
-+	lcd->winenable = winenable;
-+
-+	/*
-+	 * Re-enable screen now that it is configured
-+	 */
-+	lcd->screen |= LCD_SCREEN_SEN;
-+	au_sync();
-+
-+	/* Call init of panel */
-+	if (panel->device_init != NULL) panel->device_init();
-+
-+#if 0
-+#define D(X) printk("%25s: %08X\n", #X, X)
-+	D(lcd->screen);
-+	D(lcd->horztiming);
-+	D(lcd->verttiming);
-+	D(lcd->clkcontrol);
-+	D(lcd->pwmdiv);
-+	D(lcd->pwmhi);
-+	D(lcd->outmask);
-+	D(lcd->fifoctrl);
-+	D(lcd->window[0].winctrl0);
-+	D(lcd->window[0].winctrl1);
-+	D(lcd->window[0].winctrl2);
-+	D(lcd->window[0].winbuf0);
-+	D(lcd->window[0].winbuf1);
-+	D(lcd->window[0].winbufctrl);
-+	D(lcd->window[1].winctrl0);
-+	D(lcd->window[1].winctrl1);
-+	D(lcd->window[1].winctrl2);
-+	D(lcd->window[1].winbuf0);
-+	D(lcd->window[1].winbuf1);
-+	D(lcd->window[1].winbufctrl);
-+	D(lcd->window[2].winctrl0);
-+	D(lcd->window[2].winctrl1);
-+	D(lcd->window[2].winctrl2);
-+	D(lcd->window[2].winbuf0);
-+	D(lcd->window[2].winbuf1);
-+	D(lcd->window[2].winbufctrl);
-+	D(lcd->window[3].winctrl0);
-+	D(lcd->window[3].winctrl1);
-+	D(lcd->window[3].winctrl2);
-+	D(lcd->window[3].winbuf0);
-+	D(lcd->window[3].winbuf1);
-+	D(lcd->window[3].winbufctrl);
-+	D(lcd->winenable);
-+	D(lcd->intenable);
-+	D(lcd->intstatus);
-+	D(lcd->backcolor);
-+	D(lcd->winenable);
-+	D(lcd->colorkey);
-+    D(lcd->colorkeymsk);
-+	D(lcd->hwc.cursorctrl);
-+	D(lcd->hwc.cursorpos);
-+	D(lcd->hwc.cursorcolor0);
-+	D(lcd->hwc.cursorcolor1);
-+	D(lcd->hwc.cursorcolor2);
-+	D(lcd->hwc.cursorcolor3);
-+#endif
-+}
-+
-+static int au1200_setsize (int plane, int xres, int yres)
-+{
-+#if 0
-+	uint32 winctrl0, winctrl1, winenable;
-+	int xsz, ysz;
-+
-+	/* FIX!!! X*Y can not surpass allocated memory */
-+
-+	printk("setsize: x %d y %d\n", xres, yres);
-+	winctrl1 = lcd->window[plane].winctrl1;
-+	printk("org winctrl1 %08X\n", winctrl1);
-+	winctrl1 &= ~(LCD_WINCTRL1_SZX | LCD_WINCTRL1_SZY);
-+
-+	xres -= 1;
-+	yres -= 1;
-+	winctrl1 |= (xres << 11);
-+	winctrl1 |= (yres << 0);
-+
-+	printk("new winctrl1 %08X\n", winctrl1);
-+
-+	/*winenable = lcd->winenable & (1 << plane); */
-+	/*lcd->winenable &= ~(1 << plane); */
-+	lcd->window[plane].winctrl1 = winctrl1;
-+	/*lcd->winenable |= winenable; */
-+#endif
-+	return 0;
-+}
-+
-+static int au1200_setlocation (int plane, int xpos, int ypos)
-+{
-+	uint32 winctrl0, winctrl1, winenable, fb_offset = 0;
-+	int xsz, ysz;
-+
-+	/* FIX!!! NOT CHECKING FOR COMPLETE OFFSCREEN YET */
-+
-+	winctrl0 = lcd->window[plane].winctrl0;
-+	winctrl1 = lcd->window[plane].winctrl1;
-+	winctrl0 &= (LCD_WINCTRL0_A | LCD_WINCTRL0_AEN);
-+	winctrl1 &= ~(LCD_WINCTRL1_SZX | LCD_WINCTRL1_SZY);
-+
-+	/* Check for off-screen adjustments */
-+	xsz = win->w[plane].xres;
-+	ysz = win->w[plane].yres;
-+	if ((xpos + win->w[plane].xres) > panel->Xres)
-+	{
-+		/* Off-screen to the right */
-+		xsz = panel->Xres - xpos; /* off by 1 ??? */
-+		/*printk("off screen right\n");*/
-+	}
-+
-+	if ((ypos + win->w[plane].yres) > panel->Yres)
-+	{
-+		/* Off-screen to the bottom */
-+		ysz = panel->Yres - ypos; /* off by 1 ??? */
-+		/*printk("off screen bottom\n");*/
-+	}
-+
-+	if (xpos < 0)
-+	{
-+		/* Off-screen to the left */
-+		xsz = win->w[plane].xres + xpos;
-+		fb_offset += (((0 - xpos) * winbpp(lcd->window[plane].winctrl1))/8);
-+		xpos = 0;
-+		/*printk("off screen left\n");*/
-+	}
-+
-+	if (ypos < 0)
-+	{
-+		/* Off-screen to the top */
-+		ysz = win->w[plane].yres + ypos;
-+		fb_offset += ((0 - ypos) *	fb_pars[plane].line_length);
-+		ypos = 0;
-+		/*printk("off screen top\n");*/
-+	}
-+
-+	/* record settings */
-+	win->w[plane].xpos = xpos;
-+	win->w[plane].ypos = ypos;
-+
-+	xsz -= 1;
-+	ysz -= 1;
-+	winctrl0 |= (xpos << 21);
-+	winctrl0 |= (ypos << 10);
-+	winctrl1 |= (xsz << 11);
-+	winctrl1 |= (ysz << 0);
-+
-+	/* Disable the window while making changes, then restore WINEN */
-+	winenable = lcd->winenable & (1 << plane);
-+	lcd->winenable &= ~(1 << plane);
-+	lcd->window[plane].winctrl0 = winctrl0;
-+	lcd->window[plane].winctrl1 = winctrl1;
-+	lcd->window[plane].winbuf0 =
-+	lcd->window[plane].winbuf1 = fb_infos[plane].fb_phys + fb_offset;
-+	lcd->window[plane].winbufctrl = 0; /* select winbuf0 */
-+	lcd->winenable |= winenable;
-+
-+	return 0;
-+}
-+
-+static void au1200_setmode(int plane)
-+{
-+	/* Window/plane setup */
-+	lcd->window[plane].winctrl1 = ( 0
-+		| LCD_WINCTRL1_PRI_N(plane)
-+		| win->w[plane].mode_winctrl1 /* FRM,CCO,PO,PIPE */
-+		) ;
-+
-+	au1200_setlocation(plane, win->w[plane].xpos, win->w[plane].ypos);
-+
-+	lcd->window[plane].winctrl2 = ( 0
-+		| LCD_WINCTRL2_CKMODE_00
-+		| LCD_WINCTRL2_DBM
-+/*			| LCD_WINCTRL2_RAM */
-+		| LCD_WINCTRL2_BX_N(fb_pars[plane].line_length)
-+		| LCD_WINCTRL2_SCX_1
-+		| LCD_WINCTRL2_SCY_1
-+		) ;
-+	lcd->winenable |= win->w[plane].mode_winenable;
-+	au_sync();
-+
-+}
-+
-+static unsigned long
-+au1200fb_alloc_fbmem (unsigned long size)
-+{
-+	/* __get_free_pages() fulfills a max request of 2MB */
-+	/* do multiple requests to obtain large contigous mem */
-+#define MAX_GFP 0x00200000
-+
-+	unsigned long mem, amem, alloced = 0, allocsize;
-+
-+	size += 0x1000;
-+	allocsize = (size < MAX_GFP) ? size : MAX_GFP;
-+
-+	/* Get first chunk */
-+	mem = (unsigned long )
-+		__get_free_pages(GFP_ATOMIC | GFP_DMA, get_order(allocsize));
-+	if (mem != 0) alloced = allocsize;
-+
-+	/* Get remaining, contiguous chunks */
-+	while (alloced < size)
-+	{
-+		amem = (unsigned long )
-+			__get_free_pages(GFP_ATOMIC | GFP_DMA, get_order(allocsize));
-+		if (amem != 0)
-+			alloced += allocsize;
-+
-+		/* check for contiguous mem alloced */
-+		if ((amem == 0) || (amem + allocsize) != mem)
-+			break;
-+		else
-+			mem = amem;
-+	}
-+	return mem;
-+}
-+
-+int __init au1200fb_init(void)
-+{
-+	int num_panels = sizeof(panels)/sizeof(struct panel_settings);
-+	struct au1200fb_info *fb_info;
-+	struct display *disp;
-+	struct au1200fb_par *par;
-+	unsigned long page;
-+	int plane, bpp;
-+
-+    /*
-+	* Get the panel information/display mode
-+	*/
-+	if (panel_index < 0)
-+		panel_index = board_au1200fb_panel();
-+	if ((panel_index < 0) || (panel_index >= num_panels)) {
-+		printk("ERROR: INVALID PANEL %d\n", panel_index);
-+		return -EINVAL;
-+	}
-+	panel = &panels[panel_index];
-+	win = &windows[window_index];
-+
-+	printk("au1200fb: Panel %d %s\n", panel_index, panel->name);
-+	printk("au1200fb: Win %d %s\n", window_index, win->name);
-+
-+	/* Global setup/init */
-+	au1200_setpanel(panel);
-+	lcd->intenable = 0;
-+	lcd->intstatus = ~0;
-+	lcd->backcolor = win->mode_backcolor;
-+	lcd->winenable = 0;
-+
-+	/* Setup Color Key - FIX!!! */
-+	lcd->colorkey = win->mode_colorkey;
-+	lcd->colorkeymsk = win->mode_colorkeymsk;
-+
-+	/* Setup HWCursor - FIX!!! Need to support this eventually */
-+	lcd->hwc.cursorctrl = 0;
-+	lcd->hwc.cursorpos = 0;
-+	lcd->hwc.cursorcolor0 = 0;
-+	lcd->hwc.cursorcolor1 = 0;
-+	lcd->hwc.cursorcolor2 = 0;
-+	lcd->hwc.cursorcolor3 = 0;
-+
-+	/* Register each plane as a frame buffer device */
-+	for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane)
-+	{
-+		fb_info = &fb_infos[plane];
-+		disp = &disps[plane];
-+		par = &fb_pars[plane];
-+
-+		bpp = winbpp(win->w[plane].mode_winctrl1);
-+		if (win->w[plane].xres == 0)
-+			win->w[plane].xres = panel->Xres;
-+		if (win->w[plane].yres == 0)
-+			win->w[plane].yres = panel->Yres;
-+
-+		par->var.xres =
-+		par->var.xres_virtual = win->w[plane].xres;
-+		par->var.yres =
-+		par->var.yres_virtual = win->w[plane].yres;
-+		par->var.bits_per_pixel = bpp;
-+		par->line_length = win->w[plane].xres * bpp / 8; /* in bytes */
-+		/*
-+		 * Allocate LCD framebuffer from system memory
-+		 * Set page reserved so that mmap will work. This is necessary
-+		 * since we'll be remapping normal memory.
-+		 */
-+		fb_info->fb_size = (win->w[plane].xres * win->w[plane].yres * bpp) / 8;
-+		fb_info->fb_virt_start = au1200fb_alloc_fbmem(fb_info->fb_size);
-+		if (!fb_info->fb_virt_start) {
-+			printk("Unable to allocate fb memory\n");
-+			return -ENOMEM;
-+		}
-+		fb_info->fb_phys = virt_to_bus((void *)fb_info->fb_virt_start);
-+		for (page = fb_info->fb_virt_start;
-+		     page < PAGE_ALIGN(fb_info->fb_virt_start + fb_info->fb_size); 
-+		     page += PAGE_SIZE) {
-+			SetPageReserved(virt_to_page(page));
-+		}
-+		/* Convert to kseg1 */
-+		fb_info->fb_virt_start =
-+			(void *)((u32)fb_info->fb_virt_start | 0xA0000000);
-+		/* FIX!!! may wish to avoid this to save startup time??? */
-+		memset((void *)fb_info->fb_virt_start, 0, fb_info->fb_size);
-+
-+		fb_info->gen.parsize = sizeof(struct au1200fb_par);
-+		fb_info->gen.fbhw = &au1200_switch;
-+		strcpy(fb_info->gen.info.modename, "Au1200 LCD");
-+		fb_info->gen.info.changevar = NULL;
-+		fb_info->gen.info.node = -1;
-+
-+		fb_info->gen.info.fbops = &au1200fb_ops;
-+		fb_info->gen.info.disp = disp;
-+		fb_info->gen.info.switch_con = &fbgen_switch;
-+		fb_info->gen.info.updatevar = &fbgen_update_var;
-+		fb_info->gen.info.blank = &fbgen_blank;
-+		fb_info->gen.info.flags = FBINFO_FLAG_DEFAULT;
-+
-+		fb_info->nohwcursor = 1;
-+		fb_info->noblanking = 1;
-+
-+		/* This should give a reasonable default video mode */
-+		fbgen_get_var(&disp->var, -1, &fb_info->gen.info);
-+		fbgen_do_set_var(&disp->var, 1, &fb_info->gen);
-+		fbgen_set_disp(-1, &fb_info->gen);
-+		fbgen_install_cmap(0, &fb_info->gen);
-+
-+		/* Turn on plane */
-+		au1200_setmode(plane);
-+
-+		if (register_framebuffer(&fb_info->gen.info) < 0)
-+			return -EINVAL;
-+
-+		printk(KERN_INFO "fb%d: %s plane %d @ %08X (%d x %d x %d)\n", 
-+				GET_FB_IDX(fb_info->gen.info.node), 
-+				fb_info->gen.info.modename, plane, fb_info->fb_phys,
-+				win->w[plane].xres, win->w[plane].yres, bpp);
-+	}
-+	/* uncomment this if your driver cannot be unloaded */
-+	/* MOD_INC_USE_COUNT; */
-+	return 0;
-+}
-+
-+void au1200fb_setup(char *options, int *ints)
-+{
-+	char* this_opt;
-+	int i;
-+	int num_panels = sizeof(panels)/sizeof(struct panel_settings);
-+
-+	if (!options || !*options)
-+		return;
-+
-+	for(this_opt=strtok(options, ","); this_opt;
-+	    this_opt=strtok(NULL, ",")) {
-+		if (!strncmp(this_opt, "panel:", 6)) {
-+			int i;
-+			long int li;
-+			char *endptr;
-+			this_opt += 6;
-+
-+			/* Panel name can be name, "bs" for board-switch, or number/index */
-+			li = simple_strtol(this_opt, &endptr, 0);
-+			if (*endptr == '\0') {
-+				panel_index = (int)li;
-+			}
-+			else if (strcmp(this_opt, "bs") == 0) {
-+				panel_index = board_au1200fb_panel();
-+			}
-+			else
-+			for (i=0; i<num_panels; i++) {
-+				if (!strcmp(this_opt, panels[i].name)) {
-+					panel_index = i;
-+					break;
-+				}
-+			}
-+		}
-+		else if (!strncmp(this_opt, "nohwcursor", 10)) {
-+			printk("nohwcursor\n");
-+			fb_infos[0].nohwcursor = 1;
-+		}
-+	}
-+
-+	printk("au1200fb: Panel %d %s\n", panel_index,
-+		panels[panel_index].name);
-+}
-+
-+
-+
-+#ifdef MODULE
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Au1200 LCD framebuffer driver");
-+
-+void au1200fb_cleanup(struct fb_info *info)
-+{
-+	unregister_framebuffer(info);
-+}
-+
-+module_init(au1200fb_init);
-+module_exit(au1200fb_cleanup);
-+#endif /* MODULE */
-+
-+
-diff -Nur linux-2.4.32-rc1/drivers/video/au1200fb.h linux-2.4.32-rc1.mips/drivers/video/au1200fb.h
---- linux-2.4.32-rc1/drivers/video/au1200fb.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/video/au1200fb.h	2005-02-11 22:16:44.000000000 +0100
-@@ -0,0 +1,288 @@
-+/*
-+ * BRIEF MODULE DESCRIPTION
-+ *	Hardware definitions for the Au1200 LCD controller
-+ *
-+ * Copyright 2004 AMD
-+ * Author:	AMD
-+ *
-+ *  This program is free software; you can redistribute	 it and/or modify it
-+ *  under  the terms of	 the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the	License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
-+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
-+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#ifndef _AU1200LCD_H
-+#define _AU1200LCD_H
-+
-+/********************************************************************/
-+#define AU1200_LCD_ADDR		0xB5000000
-+
-+#define uint8 unsigned char
-+#define uint32 unsigned int
-+
-+typedef volatile struct
-+{
-+	uint32	reserved0;
-+	uint32	screen;
-+	uint32	backcolor;
-+	uint32	horztiming;
-+	uint32	verttiming;
-+	uint32	clkcontrol;
-+	uint32	pwmdiv;
-+	uint32	pwmhi;
-+	uint32	reserved1;
-+	uint32	winenable;
-+	uint32	colorkey;
-+	uint32	colorkeymsk;
-+	struct
-+	{
-+		uint32	cursorctrl;
-+		uint32	cursorpos;
-+		uint32	cursorcolor0;
-+		uint32	cursorcolor1;
-+		uint32	cursorcolor2;
-+		uint32	cursorcolor3;
-+	} hwc;
-+	uint32	intstatus;
-+	uint32	intenable;
-+	uint32	outmask;
-+	uint32	fifoctrl;
-+	uint32	reserved2[(0x0100-0x0058)/4];
-+	struct
-+	{
-+		uint32	winctrl0;
-+		uint32	winctrl1;
-+		uint32	winctrl2;
-+		uint32	winbuf0;
-+		uint32	winbuf1;
-+		uint32	winbufctrl;
-+		uint32	winreserved0;
-+		uint32	winreserved1;
-+	} window[4];
-+
-+	uint32	reserved3[(0x0400-0x0180)/4];
-+
-+	uint32	palette[(0x0800-0x0400)/4];
-+
-+	uint8	cursorpattern[256];
-+
-+} AU1200_LCD;
-+
-+/* lcd_screen */
-+#define LCD_SCREEN_SEN		(1<<31)
-+#define LCD_SCREEN_SX		(0x07FF<<19)
-+#define LCD_SCREEN_SY		(0x07FF<< 8)
-+#define LCD_SCREEN_SWP		(1<<7)
-+#define LCD_SCREEN_SWD		(1<<6)
-+#define LCD_SCREEN_ST		(7<<0)
-+#define LCD_SCREEN_ST_TFT	(0<<0)
-+#define LCD_SCREEN_SX_N(WIDTH)	((WIDTH-1)<<19)
-+#define LCD_SCREEN_SY_N(HEIGHT)	((HEIGHT-1)<<8)
-+#define LCD_SCREEN_ST_CSTN	(1<<0)
-+#define LCD_SCREEN_ST_CDSTN	(2<<0)
-+#define LCD_SCREEN_ST_M8STN	(3<<0)
-+#define LCD_SCREEN_ST_M4STN	(4<<0)
-+
-+/* lcd_backcolor */
-+#define LCD_BACKCOLOR_SBGR		(0xFF<<16)
-+#define LCD_BACKCOLOR_SBGG		(0xFF<<8)
-+#define LCD_BACKCOLOR_SBGB		(0xFF<<0)
-+#define LCD_BACKCOLOR_SBGR_N(N)	((N)<<16)
-+#define LCD_BACKCOLOR_SBGG_N(N)	((N)<<8)
-+#define LCD_BACKCOLOR_SBGB_N(N)	((N)<<0)
-+
-+/* lcd_winenable */
-+#define LCD_WINENABLE_WEN3		(1<<3)
-+#define LCD_WINENABLE_WEN2		(1<<2)
-+#define LCD_WINENABLE_WEN1		(1<<1)
-+#define LCD_WINENABLE_WEN0		(1<<0)
-+
-+/* lcd_colorkey */
-+#define LCD_COLORKEY_CKR		(0xFF<<16)
-+#define LCD_COLORKEY_CKG		(0xFF<<8)
-+#define LCD_COLORKEY_CKB		(0xFF<<0)
-+#define LCD_COLORKEY_CKR_N(N)	((N)<<16)
-+#define LCD_COLORKEY_CKG_N(N)	((N)<<8)
-+#define LCD_COLORKEY_CKB_N(N)	((N)<<0)
-+
-+/* lcd_colorkeymsk */
-+#define LCD_COLORKEYMSK_CKMR		(0xFF<<16)
-+#define LCD_COLORKEYMSK_CKMG		(0xFF<<8)
-+#define LCD_COLORKEYMSK_CKMB		(0xFF<<0)
-+#define LCD_COLORKEYMSK_CKMR_N(N)	((N)<<16)
-+#define LCD_COLORKEYMSK_CKMG_N(N)	((N)<<8)
-+#define LCD_COLORKEYMSK_CKMB_N(N)	((N)<<0)
-+
-+/* lcd windows control 0 */
-+#define LCD_WINCTRL0_OX		(0x07FF<<21)
-+#define LCD_WINCTRL0_OY		(0x07FF<<10)
-+#define LCD_WINCTRL0_A		(0x00FF<<2)
-+#define LCD_WINCTRL0_AEN	(1<<1)
-+#define LCD_WINCTRL0_OX_N(N) ((N)<<21)
-+#define LCD_WINCTRL0_OY_N(N) ((N)<<10)
-+#define LCD_WINCTRL0_A_N(N) ((N)<<2)
-+
-+/* lcd windows control 1 */
-+#define LCD_WINCTRL1_PRI	(3<<30)
-+#define LCD_WINCTRL1_PIPE	(1<<29)
-+#define LCD_WINCTRL1_FRM	(0xF<<25)
-+#define LCD_WINCTRL1_CCO	(1<<24)
-+#define LCD_WINCTRL1_PO		(3<<22)
-+#define LCD_WINCTRL1_SZX	(0x07FF<<11)
-+#define LCD_WINCTRL1_SZY	(0x07FF<<0)
-+#define LCD_WINCTRL1_FRM_1BPP	(0<<25)
-+#define LCD_WINCTRL1_FRM_2BPP	(1<<25)
-+#define LCD_WINCTRL1_FRM_4BPP	(2<<25)
-+#define LCD_WINCTRL1_FRM_8BPP	(3<<25)
-+#define LCD_WINCTRL1_FRM_12BPP	(4<<25)
-+#define LCD_WINCTRL1_FRM_16BPP655	(5<<25)
-+#define LCD_WINCTRL1_FRM_16BPP565	(6<<25)
-+#define LCD_WINCTRL1_FRM_16BPP556	(7<<25)
-+#define LCD_WINCTRL1_FRM_16BPPI1555	(8<<25)
-+#define LCD_WINCTRL1_FRM_16BPPI5551	(9<<25)
-+#define LCD_WINCTRL1_FRM_16BPPA1555	(10<<25)
-+#define LCD_WINCTRL1_FRM_16BPPA5551	(11<<25)
-+#define LCD_WINCTRL1_FRM_24BPP		(12<<25)
-+#define LCD_WINCTRL1_FRM_32BPP		(13<<25)
-+#define LCD_WINCTRL1_PRI_N(N)	((N)<<30)
-+#define LCD_WINCTRL1_PO_00		(0<<22)
-+#define LCD_WINCTRL1_PO_01		(1<<22)
-+#define LCD_WINCTRL1_PO_10		(2<<22)
-+#define LCD_WINCTRL1_PO_11		(3<<22)
-+#define LCD_WINCTRL1_SZX_N(N)	((N-1)<<11)
-+#define LCD_WINCTRL1_SZY_N(N)	((N-1)<<0)
-+
-+/* lcd windows control 2 */
-+#define LCD_WINCTRL2_CKMODE		(3<<24)
-+#define LCD_WINCTRL2_DBM		(1<<23)
-+#define LCD_WINCTRL2_RAM		(3<<21)
-+#define LCD_WINCTRL2_BX			(0x1FFF<<8)
-+#define LCD_WINCTRL2_SCX		(0xF<<4)
-+#define LCD_WINCTRL2_SCY		(0xF<<0)
-+#define LCD_WINCTRL2_CKMODE_00		(0<<24)
-+#define LCD_WINCTRL2_CKMODE_01		(1<<24)
-+#define LCD_WINCTRL2_CKMODE_10		(2<<24)
-+#define LCD_WINCTRL2_CKMODE_11		(3<<24)
-+#define LCD_WINCTRL2_RAM_NONE		(0<<21)
-+#define LCD_WINCTRL2_RAM_PALETTE	(1<<21)
-+#define LCD_WINCTRL2_RAM_GAMMA		(2<<21)
-+#define LCD_WINCTRL2_RAM_BUFFER		(3<<21)
-+#define LCD_WINCTRL2_BX_N(N)	((N)<<8)
-+#define LCD_WINCTRL2_SCX_1		(0<<4)
-+#define LCD_WINCTRL2_SCX_2		(1<<4)
-+#define LCD_WINCTRL2_SCX_4		(2<<4)
-+#define LCD_WINCTRL2_SCY_1		(0<<0)
-+#define LCD_WINCTRL2_SCY_2		(1<<0)
-+#define LCD_WINCTRL2_SCY_4		(2<<0)
-+
-+/* lcd windows buffer control */
-+#define LCD_WINBUFCTRL_DB		(1<<1)
-+#define LCD_WINBUFCTRL_DBN		(1<<0)
-+
-+/* lcd_intstatus, lcd_intenable */
-+#define LCD_INT_IFO				(0xF<<14)
-+#define LCD_INT_IFU				(0xF<<10)
-+#define LCD_INT_OFO				(1<<9)
-+#define LCD_INT_OFU				(1<<8)
-+#define LCD_INT_WAIT			(1<<3)
-+#define LCD_INT_SD				(1<<2)
-+#define LCD_INT_SA				(1<<1)
-+#define LCD_INT_SS				(1<<0)
-+
-+/* lcd_horztiming */
-+#define LCD_HORZTIMING_HND2		(0x1FF<<18)
-+#define LCD_HORZTIMING_HND1		(0x1FF<<9)
-+#define LCD_HORZTIMING_HPW		(0x1FF<<0)
-+#define LCD_HORZTIMING_HND2_N(N)(((N)-1)<<18)
-+#define LCD_HORZTIMING_HND1_N(N)(((N)-1)<<9)
-+#define LCD_HORZTIMING_HPW_N(N)	(((N)-1)<<0)
-+
-+/* lcd_verttiming */
-+#define LCD_VERTTIMING_VND2		(0x1FF<<18)
-+#define LCD_VERTTIMING_VND1		(0x1FF<<9)
-+#define LCD_VERTTIMING_VPW		(0x1FF<<0)
-+#define LCD_VERTTIMING_VND2_N(N)(((N)-1)<<18)
-+#define LCD_VERTTIMING_VND1_N(N)(((N)-1)<<9)
-+#define LCD_VERTTIMING_VPW_N(N)	(((N)-1)<<0)
-+
-+/* lcd_clkcontrol */
-+#define LCD_CLKCONTROL_EXT		(1<<22)
-+#define LCD_CLKCONTROL_DELAY	(3<<20)
-+#define LCD_CLKCONTROL_CDD		(1<<19)
-+#define LCD_CLKCONTROL_IB		(1<<18)
-+#define LCD_CLKCONTROL_IC		(1<<17)
-+#define LCD_CLKCONTROL_IH		(1<<16)
-+#define LCD_CLKCONTROL_IV		(1<<15)
-+#define LCD_CLKCONTROL_BF		(0x1F<<10)
-+#define LCD_CLKCONTROL_PCD		(0x3FF<<0)
-+#define LCD_CLKCONTROL_BF_N(N)	(((N)-1)<<10)
-+#define LCD_CLKCONTROL_PCD_N(N)	((N)<<0)
-+
-+/* lcd_pwmdiv */
-+#define LCD_PWMDIV_EN			(1<<31)
-+#define LCD_PWMDIV_PWMDIV		(0x1FFFF<<0)
-+#define LCD_PWMDIV_PWMDIV_N(N)	((N)<<0)
-+
-+/* lcd_pwmhi */
-+#define LCD_PWMHI_PWMHI1		(0xFFFF<<16)
-+#define LCD_PWMHI_PWMHI0		(0xFFFF<<0)
-+#define LCD_PWMHI_PWMHI1_N(N)	((N)<<16)
-+#define LCD_PWMHI_PWMHI0_N(N)	((N)<<0)
-+
-+/* lcd_hwccon */
-+#define LCD_HWCCON_EN			(1<<0)
-+
-+/* lcd_cursorpos */
-+#define LCD_CURSORPOS_HWCXOFF		(0x1F<<27)
-+#define LCD_CURSORPOS_HWCXPOS		(0x07FF<<16)
-+#define LCD_CURSORPOS_HWCYOFF		(0x1F<<11)
-+#define LCD_CURSORPOS_HWCYPOS		(0x07FF<<0)
-+#define LCD_CURSORPOS_HWCXOFF_N(N)	((N)<<27)
-+#define LCD_CURSORPOS_HWCXPOS_N(N)	((N)<<16)
-+#define LCD_CURSORPOS_HWCYOFF_N(N)	((N)<<11)
-+#define LCD_CURSORPOS_HWCYPOS_N(N)	((N)<<0)
-+
-+/* lcd_cursorcolor */
-+#define LCD_CURSORCOLOR_HWCA		(0xFF<<24)
-+#define LCD_CURSORCOLOR_HWCR		(0xFF<<16)
-+#define LCD_CURSORCOLOR_HWCG		(0xFF<<8)
-+#define LCD_CURSORCOLOR_HWCB		(0xFF<<0)
-+#define LCD_CURSORCOLOR_HWCA_N(N)	((N)<<24)
-+#define LCD_CURSORCOLOR_HWCR_N(N)	((N)<<16)
-+#define LCD_CURSORCOLOR_HWCG_N(N)	((N)<<8)
-+#define LCD_CURSORCOLOR_HWCB_N(N)	((N)<<0)
-+
-+/* lcd_fifoctrl */
-+#define LCD_FIFOCTRL_F3IF		(1<<29)
-+#define LCD_FIFOCTRL_F3REQ		(0x1F<<24)
-+#define LCD_FIFOCTRL_F2IF		(1<<29)
-+#define LCD_FIFOCTRL_F2REQ		(0x1F<<16)
-+#define LCD_FIFOCTRL_F1IF		(1<<29)
-+#define LCD_FIFOCTRL_F1REQ		(0x1F<<8)
-+#define LCD_FIFOCTRL_F0IF		(1<<29)
-+#define LCD_FIFOCTRL_F0REQ		(0x1F<<0)
-+#define LCD_FIFOCTRL_F3REQ_N(N)	((N-1)<<24)
-+#define LCD_FIFOCTRL_F2REQ_N(N)	((N-1)<<16)
-+#define LCD_FIFOCTRL_F1REQ_N(N)	((N-1)<<8)
-+#define LCD_FIFOCTRL_F0REQ_N(N)	((N-1)<<0)
-+
-+/* lcd_outmask */
-+#define LCD_OUTMASK_MASK		(0x00FFFFFF)
-+
-+/********************************************************************/
-+#endif /* _AU1200LCD_H */
-diff -Nur linux-2.4.32-rc1/drivers/video/Config.in linux-2.4.32-rc1.mips/drivers/video/Config.in
---- linux-2.4.32-rc1/drivers/video/Config.in	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/video/Config.in	2005-02-11 22:16:44.000000000 +0100
-@@ -87,8 +87,8 @@
-    if [ "$CONFIG_HP300" = "y" ]; then
-       define_bool CONFIG_FB_HP300 y
-    fi
--   if [ "$ARCH" = "alpha" ]; then
--      tristate '  TGA framebuffer support' CONFIG_FB_TGA
-+   if [ "$ARCH" = "alpha" -o "$CONFIG_TC" = "y" ]; then
-+      tristate '  TGA/SFB+ framebuffer support' CONFIG_FB_TGA
-    fi
-    if [ "$CONFIG_X86" = "y" ]; then
-       bool '  VESA VGA graphics console' CONFIG_FB_VESA
-@@ -121,6 +121,17 @@
-          hex '    Framebuffer Base Address' CONFIG_E1355_FB_BASE a8200000
-       fi
-    fi
-+   if [ "$CONFIG_SOC_AU1100" = "y" ]; then
-+      bool '  Au1100 LCD Driver' CONFIG_FB_AU1100
-+   fi
-+   
-+   if [ "$CONFIG_SOC_AU1200" = "y" ]; then
-+      bool '  Au1200 LCD Driver' CONFIG_FB_AU1200
-+      if [ "$CONFIG_FB_AU1200" = "y" ]; then
-+      int  '    Number of planes (1 to 4)' CONFIG_FB_AU1200_DEVS 1
-+      fi
-+   fi
-+   
-    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-       if [ "$CONFIG_PCI" != "n" ]; then
- 	 tristate '  Matrox acceleration (EXPERIMENTAL)' CONFIG_FB_MATROX
-@@ -178,9 +189,6 @@
- 	     bool '    Use CRT on Pb1100 ' CONFIG_PB1500_CRT
- 	     bool '    Use TFT Panel on Pb1100 ' CONFIG_PB1500_TFT
-            fi
--           if [ "$CONFIG_SOC_AU1100" = "y" ]; then
--	     bool '    Au1100 LCD Driver' CONFIG_FB_AU1100
--           fi
- 	 fi
-       fi
-    fi
-diff -Nur linux-2.4.32-rc1/drivers/video/fbmem.c linux-2.4.32-rc1.mips/drivers/video/fbmem.c
---- linux-2.4.32-rc1/drivers/video/fbmem.c	2005-06-01 02:56:56.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/video/fbmem.c	2005-05-25 19:14:24.000000000 +0200
-@@ -139,6 +139,8 @@
- extern int e1356fb_setup(char*);
- extern int au1100fb_init(void);
- extern int au1100fb_setup(char*);
-+extern int au1200fb_init(void);
-+extern int au1200fb_setup(char*);
- extern int pvr2fb_init(void);
- extern int pvr2fb_setup(char*);
- extern int sstfb_init(void);
-@@ -331,6 +333,9 @@
- #ifdef CONFIG_FB_AU1100
- 	{ "au1100fb", au1100fb_init, au1100fb_setup },
- #endif 
-+#ifdef CONFIG_FB_AU1200
-+	{ "au1200fb", au1200fb_init, au1200fb_setup },
-+#endif 
- #ifdef CONFIG_FB_IT8181
- 	{ "it8181fb", it8181fb_init, it8181fb_setup },
- #endif
-diff -Nur linux-2.4.32-rc1/drivers/video/ims332.h linux-2.4.32-rc1.mips/drivers/video/ims332.h
---- linux-2.4.32-rc1/drivers/video/ims332.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/video/ims332.h	2003-12-22 17:02:20.000000000 +0100
-@@ -0,0 +1,275 @@
-+/*
-+ *	linux/drivers/video/ims332.h
-+ *
-+ *	Copyright 2003  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
-+ *
-+ *	This file is subject to the terms and conditions of the GNU General
-+ *	Public License. See the file COPYING in the main directory of this
-+ *	archive for more details.
-+ */
-+#include <linux/types.h>
-+
-+/*
-+ * IMS332 16-bit wide, 128-bit aligned registers.
-+ */
-+struct _ims332_reg {
-+	volatile u16 r;
-+	u16 pad[7];
-+};
-+
-+struct _ims332_regs {
-+#define IMS332_BOOT_PLL_MUTLIPLIER	0x00001f
-+#define IMS332_BOOT_CLOCK_SOURCE_SEL	0x000020
-+#define IMS332_BOOT_ADDRESS_ALIGNMENT	0x000040
-+#define IMS332_BOOT_WRITE_ZERO		0xffff80
-+	struct _ims332_reg boot;
-+	struct _ims332_reg pad0[0x020 - 0x000];
-+	struct _ims332_reg half_sync;
-+	struct _ims332_reg back_porch;
-+	struct _ims332_reg display;
-+	struct _ims332_reg short_display;
-+	struct _ims332_reg broad_pulse;
-+	struct _ims332_reg vsync;
-+	struct _ims332_reg vpre_equalise;
-+	struct _ims332_reg vpost_equalise;
-+	struct _ims332_reg vblank;
-+	struct _ims332_reg vdisplay;
-+	struct _ims332_reg line_time;
-+	struct _ims332_reg line_start;
-+	struct _ims332_reg mem_init;
-+	struct _ims332_reg transfer_delay;
-+	struct _ims332_reg pad1[0x03f - 0x02e];
-+	struct _ims332_reg pixel_address_mask;
-+	struct _ims332_reg pad2[0x05f - 0x040];
-+
-+#define IMS332_CTRL_A_BOOT_ENABLE_VTG		0x000001
-+#define IMS332_CTRL_A_SCREEN_FORMAT		0x000002
-+#define IMS332_CTRL_A_INTERLACED_STANDARD	0x000004
-+#define IMS332_CTRL_A_OPERATING_MODE		0x000008
-+#define IMS332_CTRL_A_FRAME_FLYBACK_PATTERN	0x000010
-+#define IMS332_CTRL_A_DIGITAL_SYNC_FORMAT	0x000020
-+#define IMS332_CTRL_A_ANALOGUE_VIDEO_FORMAT	0x000040
-+#define IMS332_CTRL_A_BLANK_LEVEL		0x000080
-+#define IMS332_CTRL_A_BLANK_IO			0x000100
-+#define IMS332_CTRL_A_BLANK_FUNCTION_SWITCH	0x000200
-+#define IMS332_CTRL_A_FORCE_BLANKING		0x000400
-+#define IMS332_CTRL_A_TURN_OFF_BLANKING		0x000800
-+#define IMS332_CTRL_A_VRAM_ADDRESS_INCREMENT	0x003000
-+#define IMS332_CTRL_A_TURN_OFF_DMA		0x004000
-+#define IMS332_CTRL_A_SYNC_DELAY		0x038000
-+#define IMS332_CTRL_A_PIXEL_PORT_INTERLEAVING	0x040000
-+#define IMS332_CTRL_A_DELAYED_SAMPLING		0x080000
-+#define IMS332_CTRL_A_BITS_PER_PIXEL		0x700000
-+#define IMS332_CTRL_A_CURSOR_DISABLE		0x800000
-+	struct _ims332_reg config_control_a;
-+	struct _ims332_reg pad3[0x06f - 0x060];
-+
-+#define IMS332_CTRL_B_WRITE_ZERO	0xffffff
-+	struct _ims332_reg config_control_b;
-+	struct _ims332_reg pad4[0x07f - 0x070];
-+	struct _ims332_reg screen_top;
-+	struct _ims332_reg pad5[0x0a0 - 0x080];
-+	/* cursor color palette, 3 entries, reg no. 0xa1 - 0xa3 */
-+	struct _ims332_reg cursor_color_palette0;
-+	struct _ims332_reg cursor_color_palette1;
-+	struct _ims332_reg cursor_color_palette2;
-+	struct _ims332_reg pad6[0x0bf - 0x0a3];
-+	struct _ims332_reg rgb_frame_checksum0;
-+	struct _ims332_reg rgb_frame_checksum1;
-+	struct _ims332_reg rgb_frame_checksum2;
-+	struct _ims332_reg pad7[0x0c6 - 0x0c2];
-+	struct _ims332_reg cursor_start;
-+	struct _ims332_reg pad8[0x0ff - 0x0c7];
-+	/* color palette, 256 entries of form 0x00BBGGRR, reg no. 0x100 - 0x1ff */
-+	struct _ims332_reg color_palette[0x1ff - 0x0ff];
-+	/* hardware cursor bitmap, reg no. 0x200 - 0x3ff */
-+	struct _ims332_reg cursor_ram[0x3ff - 0x1ff];
-+};
-+
-+/*
-+ * In the functions below we use some weird looking helper variables to
-+ * access most members of this struct, otherwise the compiler splits
-+ * the read/write in two byte accesses.
-+ */
-+struct ims332_regs {
-+	struct _ims332_regs rw;
-+	char pad0[0x80000 - sizeof (struct _ims332_regs)];
-+	struct _ims332_regs r;
-+	char pad1[0xa0000 - (sizeof (struct _ims332_regs) + 0x80000)];
-+	struct _ims332_regs w;
-+} __attribute__((packed));
-+
-+static inline void ims332_control_reg_bits(struct ims332_regs *regs, u32 mask,
-+					   u32 val)
-+{
-+	volatile u16 *ctr = &(regs->r.config_control_a.r);
-+	volatile u16 *ctw = &(regs->w.config_control_a.r);
-+	u32 ctrl;
-+
-+	mb();
-+	ctrl = *ctr;
-+	rmb();
-+	ctrl |= ((regs->rw.boot.r << 8) & 0x00ff0000);
-+	ctrl |= val & mask;
-+	ctrl &= ~(~val & mask);
-+	wmb();
-+	regs->rw.boot.r = (ctrl >> 8) & 0xff00;
-+	wmb();
-+	*ctw = ctrl & 0xffff;
-+}
-+
-+/* FIXME: This is maxinefb specific. */
-+static inline void ims332_bootstrap(struct ims332_regs *regs)
-+{
-+	volatile u16 *ctw = &(regs->w.config_control_a.r);
-+	u32 ctrl = IMS332_CTRL_A_BOOT_ENABLE_VTG | IMS332_CTRL_A_TURN_OFF_DMA;
-+
-+	/* bootstrap sequence */
-+	mb();
-+	regs->rw.boot.r = 0;
-+	wmb();
-+	*ctw = 0;
-+
-+	/* init control A register */
-+	wmb();
-+	regs->rw.boot.r = (ctrl >> 8) & 0xff00;
-+	wmb();
-+	*ctw = ctrl & 0xffff;
-+}
-+
-+static inline void ims332_blank_screen(struct ims332_regs *regs, int blank)
-+{
-+	ims332_control_reg_bits(regs, IMS332_CTRL_A_FORCE_BLANKING,
-+				blank ? IMS332_CTRL_A_FORCE_BLANKING : 0);
-+}
-+
-+static inline void ims332_set_color_depth(struct ims332_regs *regs, u32 depth)
-+{
-+	u32 dp;
-+	u32 mask = (IMS332_CTRL_A_PIXEL_PORT_INTERLEAVING
-+		    | IMS332_CTRL_A_DELAYED_SAMPLING
-+		    | IMS332_CTRL_A_BITS_PER_PIXEL);
-+
-+	switch (depth) {
-+	case 1: dp = 0 << 20; break;
-+	case 2: dp = 1 << 20; break;
-+	case 4: dp = 2 << 20; break;
-+	case 8: dp = 3 << 20; break;
-+	case 15: dp = (4 << 20) | IMS332_CTRL_A_PIXEL_PORT_INTERLEAVING; break;
-+	case 16: dp = (5 << 20) | IMS332_CTRL_A_PIXEL_PORT_INTERLEAVING; break;
-+	default: return;
-+	}
-+	ims332_control_reg_bits(regs, mask, dp);
-+
-+	if (depth <= 8) {
-+		volatile u16 *pmask = &(regs->w.pixel_address_mask.r);
-+		u32 dm = (1 << depth) - 1;
-+
-+		wmb();
-+		regs->rw.boot.r = dm << 8;
-+		wmb();
-+		*pmask = dm << 8 | dm;
-+	}
-+}
-+
-+static inline void ims332_set_screen_top(struct ims332_regs *regs, u16 top)
-+{
-+	volatile u16 *st = &(regs->w.screen_top.r);
-+
-+	mb();
-+	*st = top & 0xffff;
-+}
-+
-+static inline void ims332_enable_cursor(struct ims332_regs *regs, int on)
-+{
-+	ims332_control_reg_bits(regs, IMS332_CTRL_A_CURSOR_DISABLE,
-+				on ? 0 : IMS332_CTRL_A_CURSOR_DISABLE);
-+}
-+
-+static inline void ims332_position_cursor(struct ims332_regs *regs,
-+					  u16 x, u16 y)
-+{
-+	volatile u16 *cp = &(regs->w.cursor_start.r);
-+	u32 val = ((x & 0xfff) << 12) | (y & 0xfff);
-+
-+	if (x > 2303 || y > 2303)
-+		return;
-+
-+	mb();
-+	regs->rw.boot.r = (val >> 8) & 0xff00;
-+	wmb();
-+	*cp = val & 0xffff;
-+}
-+
-+static inline void ims332_set_font(struct ims332_regs *regs, u8 fgc,
-+				   u16 width, u16 height)
-+{
-+	volatile u16 *cp0 = &(regs->w.cursor_color_palette0.r);
-+	int i;
-+
-+	mb();
-+	for (i = 0; i < 0x200; i++) {
-+		volatile u16 *cram = &(regs->w.cursor_ram[i].r);
-+
-+		if (height << 6 <= i << 3)
-+			*cram = 0x0000;
-+		else if (width <= i % 8 << 3)
-+			*cram = 0x0000;
-+		else if (((width >> 3) & 0xffff) > i % 8)
-+			*cram = 0x5555;
-+		else
-+			*cram = 0x5555 & ~(0xffff << (width % 8 << 1));
-+		wmb();
-+	}
-+	regs->rw.boot.r = fgc << 8;
-+	wmb();
-+	*cp0 = fgc << 8 | fgc;
-+}
-+
-+static inline void ims332_read_cmap(struct ims332_regs *regs, u8 reg,
-+				    u8* red, u8* green, u8* blue)
-+{
-+	volatile u16 *rptr = &(regs->r.color_palette[reg].r);
-+	u16 val;
-+
-+	mb();
-+	val = *rptr;
-+	*red = val & 0xff;
-+	*green = (val >> 8) & 0xff;
-+	rmb();
-+	*blue = (regs->rw.boot.r >> 8) & 0xff;
-+}
-+
-+static inline void ims332_write_cmap(struct ims332_regs *regs, u8 reg,
-+				     u8 red, u8 green, u8 blue)
-+{
-+	volatile u16 *wptr = &(regs->w.color_palette[reg].r);
-+
-+	mb();
-+	regs->rw.boot.r = blue << 8;
-+	wmb();
-+	*wptr = (green << 8) + red;
-+}
-+
-+static inline void ims332_dump_regs(struct ims332_regs *regs)
-+{
-+	int i;
-+
-+	printk(__FUNCTION__);
-+	ims332_control_reg_bits(regs, IMS332_CTRL_A_BOOT_ENABLE_VTG, 0);
-+	for (i = 0; i < 0x100; i++) {
-+		volatile u16 *cpad = (u16 *)((char *)(&regs->r) + sizeof(struct _ims332_reg) * i);
-+		u32 val;
-+
-+		val = *cpad;
-+		rmb();
-+		val |= regs->rw.boot.r << 8;
-+		rmb();
-+		if (! (i % 8))
-+			printk("\n%02x:", i);
-+		printk(" %06x", val);
-+	}
-+	ims332_control_reg_bits(regs, IMS332_CTRL_A_BOOT_ENABLE_VTG,
-+				IMS332_CTRL_A_BOOT_ENABLE_VTG);
-+	printk("\n");
-+}
-diff -Nur linux-2.4.32-rc1/drivers/video/Makefile linux-2.4.32-rc1.mips/drivers/video/Makefile
---- linux-2.4.32-rc1/drivers/video/Makefile	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/video/Makefile	2005-02-11 22:16:44.000000000 +0100
-@@ -87,6 +87,7 @@
- obj-$(CONFIG_FB_MAXINE)           += maxinefb.o
- obj-$(CONFIG_FB_TX3912)           += tx3912fb.o
- obj-$(CONFIG_FB_AU1100)		  += au1100fb.o fbgen.o
-+obj-$(CONFIG_FB_AU1200)		  += au1200fb.o fbgen.o
- obj-$(CONFIG_FB_IT8181)		  += it8181fb.o fbgen.o
- 
- subdir-$(CONFIG_STI_CONSOLE)      += sti
-diff -Nur linux-2.4.32-rc1/drivers/video/maxinefb.h linux-2.4.32-rc1.mips/drivers/video/maxinefb.h
---- linux-2.4.32-rc1/drivers/video/maxinefb.h	2003-08-25 13:44:42.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/video/maxinefb.h	1970-01-01 01:00:00.000000000 +0100
-@@ -1,38 +0,0 @@
--/*
-- *      linux/drivers/video/maxinefb.h
-- *
-- *      DECstation 5000/xx onboard framebuffer support, Copyright (C) 1999 by
-- *      Michael Engel <engel@unix-ag.org> and Karsten Merker <merker@guug.de>
-- *      This file is subject to the terms and conditions of the GNU General
-- *      Public License.  See the file COPYING in the main directory of this
-- *      archive for more details.
-- */
--
--#include <asm/addrspace.h>
--
--/*
-- * IMS332 video controller register base address
-- */
--#define MAXINEFB_IMS332_ADDRESS		KSEG1ADDR(0x1c140000)
--
--/*
-- * Begin of DECstation 5000/xx onboard framebuffer memory, default resolution
-- * is 1024x768x8
-- */
--#define DS5000_xx_ONBOARD_FBMEM_START	KSEG1ADDR(0x0a000000)
--
--/*
-- *      The IMS 332 video controller used in the DECstation 5000/xx series
-- *      uses 32 bits wide registers; the following defines declare the
-- *      register numbers, to get the real offset, these have to be multiplied
-- *      by four.
-- */
--
--#define IMS332_REG_CURSOR_RAM           0x200	/* hardware cursor bitmap */
--
--/*
-- * The color palette entries have the form 0x00BBGGRR
-- */
--#define IMS332_REG_COLOR_PALETTE        0x100	/* color palette, 256 entries */
--#define IMS332_REG_CURSOR_COLOR_PALETTE	0x0a1	/* cursor color palette, */
--						/* 3 entries             */
-diff -Nur linux-2.4.32-rc1/drivers/video/newport_con.c linux-2.4.32-rc1.mips/drivers/video/newport_con.c
---- linux-2.4.32-rc1/drivers/video/newport_con.c	2003-08-25 13:44:42.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/video/newport_con.c	2004-09-23 15:32:29.000000000 +0200
-@@ -22,6 +22,7 @@
- #include <linux/module.h>
- #include <linux/slab.h>
- 
-+#include <asm/io.h>
- #include <asm/uaccess.h>
- #include <asm/system.h>
- #include <asm/page.h>
-@@ -77,7 +78,7 @@
- static inline void newport_render_background(int xstart, int ystart,
- 					     int xend, int yend, int ci)
- {
--	newport_wait();
-+	newport_wait(npregs);
- 	npregs->set.wrmask = 0xffffffff;
- 	npregs->set.drawmode0 = (NPORT_DMODE0_DRAW | NPORT_DMODE0_BLOCK |
- 				 NPORT_DMODE0_DOSETUP | NPORT_DMODE0_STOPX
-@@ -94,7 +95,7 @@
- 	unsigned short i;
- 
- 	for (i = 0; i < 16; i++) {
--		newport_bfwait();
-+		newport_bfwait(npregs);
- 		newport_cmap_setaddr(npregs, color_table[i]);
- 		newport_cmap_setrgb(npregs,
- 				    default_red[i],
-@@ -107,7 +108,7 @@
- 	unsigned long i;
- 
- 	for (i = 0; i < LINUX_LOGO_COLORS; i++) {
--		newport_bfwait();
-+		newport_bfwait(npregs);
- 		newport_cmap_setaddr(npregs, i + 0x20);
- 		newport_cmap_setrgb(npregs,
- 				    linux_logo_red[i],
-@@ -115,13 +116,13 @@
- 				    linux_logo_blue[i]);
- 	}
- 
--	newport_wait();
-+	newport_wait(npregs);
- 	npregs->set.drawmode0 = (NPORT_DMODE0_DRAW | NPORT_DMODE0_BLOCK |
- 				 NPORT_DMODE0_CHOST);
- 
- 	npregs->set.xystarti = ((newport_xsize - LOGO_W) << 16) | (0);
- 	npregs->set.xyendi = ((newport_xsize - 1) << 16);
--	newport_wait();
-+	newport_wait(npregs);
- 
- 	for (i = 0; i < LOGO_W * LOGO_H; i++)
- 		npregs->go.hostrw0 = linux_logo[i] << 24;
-@@ -133,7 +134,7 @@
- 	if (logo_active)
- 		return;
- 
--	newport_wait();
-+	newport_wait(npregs);
- 	npregs->set.wrmask = 0xffffffff;
- 	npregs->set.drawmode0 = (NPORT_DMODE0_DRAW | NPORT_DMODE0_BLOCK |
- 				 NPORT_DMODE0_DOSETUP | NPORT_DMODE0_STOPX
-@@ -155,7 +156,7 @@
- 	unsigned short treg;
- 	int i;
- 
--	newport_wait();
-+	newport_wait(npregs);
- 	treg = newport_vc2_get(npregs, VC2_IREG_CONTROL);
- 	newport_vc2_set(npregs, VC2_IREG_CONTROL,
- 			(treg | VC2_CTRL_EVIDEO));
-@@ -165,7 +166,7 @@
- 	npregs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_RAM |
- 			       NPORT_DMODE_W2 | VC2_PROTOCOL);
- 	for (i = 0; i < 128; i++) {
--		newport_bfwait();
-+		newport_bfwait(npregs);
- 		if (i == 92 || i == 94)
- 			npregs->set.dcbdata0.byshort.s1 = 0xff00;
- 		else
-@@ -205,7 +206,7 @@
- 	npregs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_RAM |
- 			       NPORT_DMODE_W2 | VC2_PROTOCOL);
- 	for (i = 0; i < 128; i++) {
--		newport_bfwait();
-+		newport_bfwait(npregs);
- 		linetable[i] = npregs->set.dcbdata0.byshort.s1;
- 	}
- 
-@@ -216,12 +217,12 @@
- 		npregs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_RAM |
- 				       NPORT_DMODE_W2 | VC2_PROTOCOL);
- 		do {
--			newport_bfwait();
-+			newport_bfwait(npregs);
- 			treg = npregs->set.dcbdata0.byshort.s1;
- 			if ((treg & 1) == 0)
- 				cols += (treg >> 7) & 0xfe;
- 			if ((treg & 0x80) == 0) {
--				newport_bfwait();
-+				newport_bfwait(npregs);
- 				treg = npregs->set.dcbdata0.byshort.s1;
- 			}
- 		} while ((treg & 0x8000) == 0);
-@@ -291,16 +292,16 @@
- 
- 	if (!sgi_gfxaddr)
- 		return NULL;
--	npregs = (struct newport_regs *) (KSEG1 + sgi_gfxaddr);
-+	npregs = (struct newport_regs *)	/* ioremap cannot fail */
-+		 ioremap(sgi_gfxaddr, sizeof(struct newport_regs));
- 	npregs->cset.config = NPORT_CFG_GD0;
- 
--	if (newport_wait()) {
--		return NULL;
--	}
-+	if (newport_wait(npregs))
-+		goto out_unmap;
- 
- 	npregs->set.xstarti = TESTVAL;
- 	if (npregs->set._xstart.word != XSTI_TO_FXSTART(TESTVAL))
--		return NULL;
-+		goto out_unmap;
- 
- 	for (i = 0; i < MAX_NR_CONSOLES; i++)
- 		font_data[i] = FONT_DATA;
-@@ -310,6 +311,10 @@
- 	newport_get_screensize();
- 
- 	return "SGI Newport";
-+
-+out_unmap:
-+	iounmap((void *)npregs);
-+	return NULL;
- }
- 
- static void newport_init(struct vc_data *vc, int init)
-@@ -363,7 +368,7 @@
- 				  (charattr & 0xf0) >> 4);
- 
- 	/* Set the color and drawing mode. */
--	newport_wait();
-+	newport_wait(npregs);
- 	npregs->set.colori = charattr & 0xf;
- 	npregs->set.drawmode0 = (NPORT_DMODE0_DRAW | NPORT_DMODE0_BLOCK |
- 				 NPORT_DMODE0_STOPX | NPORT_DMODE0_ZPENAB |
-@@ -372,7 +377,7 @@
- 	/* Set coordinates for bitmap operation. */
- 	npregs->set.xystarti = (xpos << 16) | ((ypos + topscan) & 0x3ff);
- 	npregs->set.xyendi = ((xpos + 7) << 16);
--	newport_wait();
-+	newport_wait(npregs);
- 
- 	/* Go, baby, go... */
- 	RENDER(npregs, p);
-@@ -396,7 +401,7 @@
- 					  xpos + ((count - 1) << 3), ypos,
- 					  (charattr & 0xf0) >> 4);
- 
--	newport_wait();
-+	newport_wait(npregs);
- 
- 	/* Set the color and drawing mode. */
- 	npregs->set.colori = charattr & 0xf;
-@@ -407,7 +412,7 @@
- 	for (i = 0; i < count; i++, xpos += 8) {
- 		p = &font_data[vc->vc_num][(scr_readw(s++) & 0xff) << 4];
- 
--		newport_wait();
-+		newport_wait(npregs);
- 
- 		/* Set coordinates for bitmap operation. */
- 		npregs->set.xystarti =
-@@ -689,7 +694,7 @@
- 		xe = xs;
- 		xs = tmp;
- 	}
--	newport_wait();
-+	newport_wait(npregs);
- 	npregs->set.drawmode0 = (NPORT_DMODE0_S2S | NPORT_DMODE0_BLOCK |
- 				 NPORT_DMODE0_DOSETUP | NPORT_DMODE0_STOPX
- 				 | NPORT_DMODE0_STOPY);
-@@ -706,35 +711,35 @@
- #define DUMMY (void *) newport_dummy
- 
- const struct consw newport_con = {
--    con_startup:	newport_startup,
--    con_init:		newport_init,
--    con_deinit:		newport_deinit,
--    con_clear:		newport_clear,
--    con_putc:		newport_putc,
--    con_putcs:		newport_putcs,
--    con_cursor:		newport_cursor,
--    con_scroll:		newport_scroll,
--    con_bmove:		newport_bmove,
--    con_switch:		newport_switch,
--    con_blank:		newport_blank,
--    con_font_op:	newport_font_op,
--    con_set_palette:	newport_set_palette,
--    con_scrolldelta:	newport_scrolldelta,
--    con_set_origin:	DUMMY,
--    con_save_screen:	DUMMY
-+	.con_startup	  = newport_startup,
-+	.con_init	  = newport_init,
-+	.con_deinit	  = newport_deinit,
-+	.con_clear	  = newport_clear,
-+	.con_putc	  = newport_putc,
-+	.con_putcs	  = newport_putcs,
-+	.con_cursor	  = newport_cursor,
-+	.con_scroll	  = newport_scroll,
-+	.con_bmove 	  = newport_bmove,
-+	.con_switch	  = newport_switch,
-+	.con_blank	  = newport_blank,
-+	.con_font_op	  = newport_font_op,
-+	.con_set_palette  = newport_set_palette,
-+	.con_scrolldelta  = newport_scrolldelta,
-+	.con_set_origin	  = DUMMY,
-+	.con_save_screen  = DUMMY
- };
- 
- #ifdef MODULE
- static int __init newport_console_init(void)
- {
- 	take_over_console(&newport_con, 0, MAX_NR_CONSOLES - 1, 1);
--
- 	return 0;
- }
- 
- static void __exit newport_console_exit(void)
- {
- 	give_up_console(&newport_con);
-+	iounmap((void *)npregs);
- }
- 
- module_init(newport_console_init);
-diff -Nur linux-2.4.32-rc1/drivers/video/tgafb.c linux-2.4.32-rc1.mips/drivers/video/tgafb.c
---- linux-2.4.32-rc1/drivers/video/tgafb.c	2001-11-14 23:52:20.000000000 +0100
-+++ linux-2.4.32-rc1.mips/drivers/video/tgafb.c	2004-10-30 01:15:02.000000000 +0200
-@@ -45,6 +45,15 @@
- #include <linux/console.h>
- #include <asm/io.h>
- 
-+#ifdef CONFIG_TC
-+#include <asm/dec/tc.h>
-+#else
-+static int search_tc_card(const char *) { return -1; }
-+static void claim_tc_card(int) { }
-+static void release_tc_card(int) { }
-+static unsigned long get_tc_base_addr(int) { return 0; }
-+#endif
-+
- #include <video/fbcon.h>
- #include <video/fbcon-cfb8.h>
- #include <video/fbcon-cfb32.h>
-@@ -84,10 +93,10 @@
- };
- 
- static unsigned int deep_presets[4] = {
--  0x00014000,
--  0x0001440d,
-+  0x00004000,
-+  0x0000440d,
-   0xffffffff,
--  0x0001441d
-+  0x0000441d
- };
- 
- static unsigned int rasterop_presets[4] = {
-@@ -131,6 +140,13 @@
- 	0,
- 	FB_VMODE_NONINTERLACED
-     }},
-+    { "1280x1024-72", {			/* mode #0 of PMAGD boards */
-+	1280, 1024, 1280, 1024, 0, 0, 0, 0,
-+	{0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0},
-+	0, 0, -1, -1, FB_ACCELF_TEXT, 7692, 232, 32, 34, 3, 160, 3,
-+	FB_SYNC_ON_GREEN,
-+	FB_VMODE_NONINTERLACED
-+    }},
-     { "800x600-56", {
- 	800, 600, 800, 600, 0, 0, 0, 0,
- 	{0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0},
-@@ -488,7 +504,8 @@
-       continue;
- 
-     mb();
--    TGA_WRITE_REG(deep_presets[fb_info.tga_type], TGA_DEEP_REG);
-+    TGA_WRITE_REG(deep_presets[fb_info.tga_type] |
-+		  (par->sync_on_green ? 0x0 : 0x00010000), TGA_DEEP_REG);
-     while (TGA_READ_REG(TGA_CMD_STAT_REG) & 1) /* wait for not busy */
- 	continue;
-     mb();
-@@ -548,7 +565,7 @@
- 	BT463_WRITE(BT463_REG_ACC, BT463_CMD_REG_0, 0x40);
- 	BT463_WRITE(BT463_REG_ACC, BT463_CMD_REG_1, 0x08);
- 	BT463_WRITE(BT463_REG_ACC, BT463_CMD_REG_2, 
--		(par->sync_on_green ? 0x80 : 0x40));
-+		(par->sync_on_green ? 0xc0 : 0x40));
- 
- 	BT463_WRITE(BT463_REG_ACC, BT463_READ_MASK_0, 0xff);
- 	BT463_WRITE(BT463_REG_ACC, BT463_READ_MASK_1, 0xff);
-@@ -921,19 +938,34 @@
- int __init tgafb_init(void)
- {
-     struct pci_dev *pdev;
-+    int slot;
- 
-     pdev = pci_find_device(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TGA, NULL);
-     if (!pdev)
-+	slot = search_tc_card("PMAGD");
-+    if (!pdev && slot < 0)
- 	return -ENXIO;
- 
-     /* divine board type */
- 
--    fb_info.tga_mem_base = (unsigned long)ioremap(pdev->resource[0].start, 0);
--    fb_info.tga_type = (readl(fb_info.tga_mem_base) >> 12) & 0x0f;
--    fb_info.tga_regs_base = fb_info.tga_mem_base + TGA_REGS_OFFSET;
--    fb_info.tga_fb_base = (fb_info.tga_mem_base
-+    if (pdev) {
-+	fb_info.tga_mem_base = (unsigned long)ioremap(pdev->resource[0].start,
-+						      0);
-+	fb_info.tga_type = (readl(fb_info.tga_mem_base) >> 12) & 0x0f;
-+	fb_info.tga_regs_base = fb_info.tga_mem_base + TGA_REGS_OFFSET;
-+	fb_info.tga_fb_base = (fb_info.tga_mem_base
- 			   + fb_offset_presets[fb_info.tga_type]);
--    pci_read_config_byte(pdev, PCI_REVISION_ID, &fb_info.tga_chip_rev);
-+	pci_read_config_byte(pdev, PCI_REVISION_ID, &fb_info.tga_chip_rev);
-+
-+    } else {
-+	claim_tc_card(slot);
-+	fb_info.tga_mem_base = get_tc_base_addr(slot);
-+	fb_info.tga_type = (readl(fb_info.tga_mem_base) >> 12) & 0x0f;	/* ? */
-+	fb_info.tga_regs_base = fb_info.tga_mem_base + TGA_REGS_OFFSET;
-+	fb_info.tga_fb_base = (fb_info.tga_mem_base
-+			   + fb_offset_presets[fb_info.tga_type]);
-+	fb_info.tga_chip_rev = TGA_READ_REG(TGA_START_REG) & 0xff;
-+    }
- 
-     /* setup framebuffer */
- 
-@@ -950,40 +982,62 @@
-     fb_info.gen.fbhw = &tgafb_hwswitch;
-     fb_info.gen.fbhw->detect();
- 
--    printk (KERN_INFO "tgafb: DC21030 [TGA] detected, rev=0x%02x\n", fb_info.tga_chip_rev);
--    printk (KERN_INFO "tgafb: at PCI bus %d, device %d, function %d\n", 
--	    pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
-+    if (pdev) {
-+	printk (KERN_INFO "tgafb: DC21030 [TGA] detected, rev=0x%02x\n",
-+		fb_info.tga_chip_rev);
-+	printk (KERN_INFO "tgafb: at PCI bus %d, device %d, function %d\n", 
-+		pdev->bus->number,
-+		PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
-+    } else {
-+	printk (KERN_INFO "tgafb: SFB+ detected, rev=0x%02x\n",
-+		fb_info.tga_chip_rev);
-+    }
- 	    
-     switch (fb_info.tga_type) 
-     { 
- 	case TGA_TYPE_8PLANE:
--	    strcpy (fb_info.gen.info.modename,"Digital ZLXp-E1"); 
-+	    if (pdev)
-+		strcpy (fb_info.gen.info.modename,"Digital ZLXp-E1"); 
-+	    else
-+		strcpy (fb_info.gen.info.modename,"Digital ZLX-E1"); 
- 	    break;
- 
- 	case TGA_TYPE_24PLANE:
--	    strcpy (fb_info.gen.info.modename,"Digital ZLXp-E2"); 
-+	    if (pdev)
-+		strcpy (fb_info.gen.info.modename,"Digital ZLXp-E2"); 
-+	    else
-+		strcpy (fb_info.gen.info.modename,"Digital ZLX-E2"); 
- 	    break;
- 
- 	case TGA_TYPE_24PLUSZ:
--	    strcpy (fb_info.gen.info.modename,"Digital ZLXp-E3"); 
-+	    if (pdev)
-+		strcpy (fb_info.gen.info.modename,"Digital ZLXp-E3"); 
-+	    else
-+		strcpy (fb_info.gen.info.modename,"Digital ZLX-E3"); 
- 	    break;
-     }
- 
-     /* This should give a reasonable default video mode */
- 
-     if (!default_var_valid) {
--	default_var = tgafb_predefined[0].var;
-+	if (pdev)
-+	    default_var = tgafb_predefined[0].var;
-+	else
-+	    default_var = tgafb_predefined[1].var;
-     }
-     fbgen_get_var(&disp.var, -1, &fb_info.gen.info);
-     disp.var.activate = FB_ACTIVATE_NOW;
-     fbgen_do_set_var(&disp.var, 1, &fb_info.gen);
-     fbgen_set_disp(-1, &fb_info.gen);
-     fbgen_install_cmap(0, &fb_info.gen);
--    if (register_framebuffer(&fb_info.gen.info) < 0)
-+    if (register_framebuffer(&fb_info.gen.info) < 0) {
-+	if (slot >= 0)
-+	    release_tc_card(slot);
- 	return -EINVAL;
--    printk(KERN_INFO "fb%d: %s frame buffer device at 0x%lx\n", 
-+    }
-+    printk(KERN_INFO "fb%d: %s frame buffer device at 0x%llx\n", 
- 	    GET_FB_IDX(fb_info.gen.info.node), fb_info.gen.info.modename, 
--	    pdev->resource[0].start);
-+	    fb_info.tga_mem_base);
-     return 0;
- }
- 
-diff -Nur linux-2.4.32-rc1/drivers/video/tgafb.h linux-2.4.32-rc1.mips/drivers/video/tgafb.h
---- linux-2.4.32-rc1/drivers/video/tgafb.h	2000-04-12 18:47:28.000000000 +0200
-+++ linux-2.4.32-rc1.mips/drivers/video/tgafb.h	2004-10-30 01:15:02.000000000 +0200
-@@ -36,6 +36,7 @@
- #define	TGA_RASTEROP_REG		0x0034
- #define	TGA_PIXELSHIFT_REG		0x0038
- #define	TGA_DEEP_REG			0x0050
-+#define	TGA_START_REG			0x0054
- #define	TGA_PIXELMASK_REG		0x005c
- #define	TGA_CURSOR_BASE_REG		0x0060
- #define	TGA_HORIZ_REG			0x0064
-diff -Nur linux-2.4.32-rc1/fs/binfmt_elf.c linux-2.4.32-rc1.mips/fs/binfmt_elf.c
---- linux-2.4.32-rc1/fs/binfmt_elf.c	2005-06-01 02:56:56.000000000 +0200
-+++ linux-2.4.32-rc1.mips/fs/binfmt_elf.c	2005-05-23 14:12:31.000000000 +0200
-@@ -660,6 +660,9 @@
- 		    bprm->argc++;
- 		  }
- 		}
-+	} else {
-+		/* Executables without an interpreter also need a personality  */
-+		SET_PERSONALITY(elf_ex, ibcs2_interpreter);
- 	}
- 
- 	/* Flush all traces of the currently running executable */
-@@ -1211,7 +1214,11 @@
- 	elf.e_entry = 0;
- 	elf.e_phoff = sizeof(elf);
- 	elf.e_shoff = 0;
-+#ifdef ELF_CORE_EFLAGS
-+	elf.e_flags = ELF_CORE_EFLAGS;
-+#else
- 	elf.e_flags = 0;
-+#endif
- 	elf.e_ehsize = sizeof(elf);
- 	elf.e_phentsize = sizeof(struct elf_phdr);
- 	elf.e_phnum = segs+1;		/* Include notes */
-diff -Nur linux-2.4.32-rc1/fs/partitions/sgi.c linux-2.4.32-rc1.mips/fs/partitions/sgi.c
---- linux-2.4.32-rc1/fs/partitions/sgi.c	2001-10-02 05:03:26.000000000 +0200
-+++ linux-2.4.32-rc1.mips/fs/partitions/sgi.c	2004-08-11 22:30:07.000000000 +0200
-@@ -17,6 +17,11 @@
- #include "check.h"
- #include "sgi.h"
- 
-+#if CONFIG_BLK_DEV_MD
-+extern void md_autodetect_dev(kdev_t dev);
-+#endif
-+
-+
- int sgi_partition(struct gendisk *hd, struct block_device *bdev, unsigned long first_sector, int current_minor)
- {
- 	int i, csum, magic;
-@@ -77,6 +82,10 @@
- 		if(!blocks)
- 			continue;
- 		add_gd_partition(hd, current_minor, start, blocks);
-+#ifdef CONFIG_BLK_DEV_MD
-+		if (be32_to_cpu(p->type) == LINUX_RAID_PARTITION)
-+			md_autodetect_dev(MKDEV(hd->major, current_minor));
-+#endif
- 		current_minor++;
- 	}
- 	printk("\n");
-diff -Nur linux-2.4.32-rc1/fs/proc/array.c linux-2.4.32-rc1.mips/fs/proc/array.c
---- linux-2.4.32-rc1/fs/proc/array.c	2005-01-19 15:10:11.000000000 +0100
-+++ linux-2.4.32-rc1.mips/fs/proc/array.c	2004-11-29 18:47:18.000000000 +0100
-@@ -368,15 +368,15 @@
- 		task->cmin_flt,
- 		task->maj_flt,
- 		task->cmaj_flt,
--		task->times.tms_utime,
--		task->times.tms_stime,
--		task->times.tms_cutime,
--		task->times.tms_cstime,
-+		hz_to_std(task->times.tms_utime),
-+		hz_to_std(task->times.tms_stime),
-+		hz_to_std(task->times.tms_cutime),
-+		hz_to_std(task->times.tms_cstime),
- 		priority,
- 		nice,
- 		0UL /* removed */,
- 		task->it_real_value,
--		task->start_time,
-+		hz_to_std(task->start_time),
- 		vsize,
- 		mm ? mm->rss : 0, /* you might want to shift this left 3 */
- 		task->rlim[RLIMIT_RSS].rlim_cur,
-@@ -615,14 +615,14 @@
- 
- 	len = sprintf(buffer,
- 		"cpu  %lu %lu\n",
--		task->times.tms_utime,
--		task->times.tms_stime);
-+		hz_to_std(task->times.tms_utime),
-+		hz_to_std(task->times.tms_stime));
- 		
- 	for (i = 0 ; i < smp_num_cpus; i++)
- 		len += sprintf(buffer + len, "cpu%d %lu %lu\n",
- 			i,
--			task->per_cpu_utime[cpu_logical_map(i)],
--			task->per_cpu_stime[cpu_logical_map(i)]);
-+			hz_to_std(task->per_cpu_utime[cpu_logical_map(i)]),
-+			hz_to_std(task->per_cpu_stime[cpu_logical_map(i)]));
- 
- 	return len;
- }
-diff -Nur linux-2.4.32-rc1/fs/proc/proc_misc.c linux-2.4.32-rc1.mips/fs/proc/proc_misc.c
---- linux-2.4.32-rc1/fs/proc/proc_misc.c	2004-08-08 01:26:06.000000000 +0200
-+++ linux-2.4.32-rc1.mips/fs/proc/proc_misc.c	2004-08-14 20:39:01.000000000 +0200
-@@ -308,16 +308,16 @@
- {
- 	int i, len = 0;
- 	extern unsigned long total_forks;
--	unsigned long jif = jiffies;
-+	unsigned long jif = hz_to_std(jiffies);
- 	unsigned int sum = 0, user = 0, nice = 0, system = 0;
- 	int major, disk;
- 
- 	for (i = 0 ; i < smp_num_cpus; i++) {
- 		int cpu = cpu_logical_map(i), j;
- 
--		user += kstat.per_cpu_user[cpu];
--		nice += kstat.per_cpu_nice[cpu];
--		system += kstat.per_cpu_system[cpu];
-+		user += hz_to_std(kstat.per_cpu_user[cpu]);
-+		nice += hz_to_std(kstat.per_cpu_nice[cpu]);
-+		system += hz_to_std(kstat.per_cpu_system[cpu]);
- #if !defined(CONFIG_ARCH_S390)
- 		for (j = 0 ; j < NR_IRQS ; j++)
- 			sum += kstat.irqs[cpu][j];
-@@ -331,10 +331,10 @@
- 		proc_sprintf(page, &off, &len,
- 			"cpu%d %u %u %u %lu\n",
- 			i,
--			kstat.per_cpu_user[cpu_logical_map(i)],
--			kstat.per_cpu_nice[cpu_logical_map(i)],
--			kstat.per_cpu_system[cpu_logical_map(i)],
--			jif - (  kstat.per_cpu_user[cpu_logical_map(i)] \
-+			hz_to_std(kstat.per_cpu_user[cpu_logical_map(i)]),
-+			hz_to_std(kstat.per_cpu_nice[cpu_logical_map(i)]),
-+			hz_to_std(kstat.per_cpu_system[cpu_logical_map(i)]),
-+			jif - hz_to_std(  kstat.per_cpu_user[cpu_logical_map(i)] \
- 				   + kstat.per_cpu_nice[cpu_logical_map(i)] \
- 				   + kstat.per_cpu_system[cpu_logical_map(i)]));
- 	proc_sprintf(page, &off, &len,
-diff -Nur linux-2.4.32-rc1/include/asm-alpha/param.h linux-2.4.32-rc1.mips/include/asm-alpha/param.h
---- linux-2.4.32-rc1/include/asm-alpha/param.h	2000-11-08 08:37:31.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-alpha/param.h	2000-11-28 04:59:03.000000000 +0100
-@@ -13,6 +13,9 @@
- # else
- #  define HZ	1200
- # endif
-+#ifdef __KERNEL__
-+# define hz_to_std(a) (a)
-+#endif
- #endif
- 
- #define EXEC_PAGESIZE	8192
-diff -Nur linux-2.4.32-rc1/include/asm-i386/param.h linux-2.4.32-rc1.mips/include/asm-i386/param.h
---- linux-2.4.32-rc1/include/asm-i386/param.h	2000-10-27 20:04:43.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/asm-i386/param.h	2000-11-23 03:00:55.000000000 +0100
-@@ -3,6 +3,9 @@
- 
- #ifndef HZ
- #define HZ 100
-+#ifdef __KERNEL__
-+#define hz_to_std(a) (a)
-+#endif
- #endif
- 
- #define EXEC_PAGESIZE	4096
-diff -Nur linux-2.4.32-rc1/include/asm-ia64/param.h linux-2.4.32-rc1.mips/include/asm-ia64/param.h
---- linux-2.4.32-rc1/include/asm-ia64/param.h	2004-04-14 15:05:40.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/asm-ia64/param.h	2004-04-16 05:14:20.000000000 +0200
-@@ -7,9 +7,15 @@
-  * Based on <asm-i386/param.h>.
-  *
-  * Modified 1998, 1999, 2002-2003
-- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
-+ *    David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
-  */
- 
-+#include <linux/config.h>
-+
-+#ifdef __KERNEL__
-+#define hz_to_std(a) (a)
-+#endif
-+
- #define EXEC_PAGESIZE	65536
- 
- #ifndef NGROUPS
-diff -Nur linux-2.4.32-rc1/include/asm-m68k/param.h linux-2.4.32-rc1.mips/include/asm-m68k/param.h
---- linux-2.4.32-rc1/include/asm-m68k/param.h	2001-01-04 22:00:55.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-m68k/param.h	2001-01-11 05:02:45.000000000 +0100
-@@ -3,6 +3,9 @@
- 
- #ifndef HZ
- #define HZ 100
-+#ifdef __KERNEL__
-+#define hz_to_std(a) (a)
-+#endif
- #endif
- 
- #define EXEC_PAGESIZE	8192
-diff -Nur linux-2.4.32-rc1/include/asm-mips/au1000_gpio.h linux-2.4.32-rc1.mips/include/asm-mips/au1000_gpio.h
---- linux-2.4.32-rc1/include/asm-mips/au1000_gpio.h	2002-11-29 00:53:15.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/au1000_gpio.h	2005-01-30 09:01:28.000000000 +0100
-@@ -30,6 +30,13 @@
-  *  675 Mass Ave, Cambridge, MA 02139, USA.
-  */
- 
-+/*
-+ *  Revision history
-+ *    01/31/02  0.01   Initial release. Steve Longerbeam, MontaVista
-+ *    10/12/03  0.1    Added Au1100/Au1500, GPIO2, and bit operations. K.C. Nishio, AMD
-+ *    08/05/04  0.11   Added Au1550 and Au1200. K.C. Nishio
-+ */
-+
- #ifndef __AU1000_GPIO_H
- #define __AU1000_GPIO_H
- 
-@@ -44,13 +51,94 @@
- #define AU1000GPIO_TRISTATE	_IOW (AU1000GPIO_IOC_MAGIC, 4, int)
- #define AU1000GPIO_AVAIL_MASK	_IOR (AU1000GPIO_IOC_MAGIC, 5, int)
- 
-+// bit operations
-+#define AU1000GPIO_BIT_READ	_IOW (AU1000GPIO_IOC_MAGIC, 6, int)
-+#define AU1000GPIO_BIT_SET	_IOW (AU1000GPIO_IOC_MAGIC, 7, int)
-+#define AU1000GPIO_BIT_CLEAR	_IOW (AU1000GPIO_IOC_MAGIC, 8, int)
-+#define AU1000GPIO_BIT_TRISTATE	_IOW (AU1000GPIO_IOC_MAGIC, 9, int)
-+#define AU1000GPIO_BIT_INIT	_IOW (AU1000GPIO_IOC_MAGIC, 10, int)
-+#define AU1000GPIO_BIT_TERM	_IOW (AU1000GPIO_IOC_MAGIC, 11, int)
-+
-+/* set this major numer same as the CRIS GPIO driver */
-+#define AU1X00_GPIO_MAJOR	(120)
-+
-+#define ENABLED_ZERO		(0)
-+#define ENABLED_ONE		(1)
-+#define ENABLED_10		(0x2)
-+#define ENABLED_11		(0x3)
-+#define ENABLED_111		(0x7)
-+#define NOT_AVAIL		(-1)
-+#define AU1X00_MAX_PRIMARY_GPIO	(32) 
-+
-+#define AU1000_GPIO_MINOR_MAX	AU1X00_MAX_PRIMARY_GPIO
-+/* Au1100, 1500, 1550 and 1200 have the secondary GPIO block */
-+#define AU1XX0_GPIO_MINOR_MAX	(48)
-+
-+#define AU1X00_GPIO_NAME	"gpio"
-+
-+/* GPIO pins which are not multiplexed */
-+#if defined(CONFIG_SOC_AU1000)
-+  #define NATIVE_GPIOPIN	((1 << 15) | (1 << 8) | (1 << 7) | (1 << 1) | (1 << 0))
-+  #define NATIVE_GPIO2PIN	(0)
-+#elif defined(CONFIG_SOC_AU1100)
-+  #define NATIVE_GPIOPIN	((1 << 23) | (1 << 22) | (1 << 21) | (1 << 20) | (1 << 19) | (1 << 18) | \
-+				 (1 << 17) | (1 << 16) | (1 << 7) | (1 << 1) | (1 << 0))
-+  #define NATIVE_GPIO2PIN	(0)
-+#elif defined(CONFIG_SOC_AU1500)
-+  #define NATIVE_GPIOPIN	((1 << 15) | (1 << 8) | (1 << 7) | (1 << 1) | (1 << 0))
-+  /* exclude the PCI reset output signal: GPIO[200], DMA_REQ2 and DMA_REQ3 */
-+  #define NATIVE_GPIO2PIN	(0xfffe & ~((1 << 9) | (1 << 8))) 
-+#elif defined(CONFIG_SOC_AU1550)
-+  #define NATIVE_GPIOPIN	((1 << 15) | (1 << 8) | (1 << 7) | (1 << 6) | (1 << 1) | (1 << 0))
-+  /* please refere Au1550 Data Book, chapter 15 */
-+  #define NATIVE_GPIO2PIN	(1 << 5) 
-+#elif defined(CONFIG_SOC_AU1200)
-+  #define NATIVE_GPIOPIN	((1 << 7) | (1 << 5))
-+  #define NATIVE_GPIO2PIN	(0) 
-+#endif
-+
-+/* minor as u32 */
-+#define MINOR_TO_GPIOPIN(minor)		((minor < AU1X00_MAX_PRIMARY_GPIO) ? minor : (minor - AU1X00_MAX_PRIMARY_GPIO))
-+#define IS_PRIMARY_GPIOPIN(minor)	((minor < AU1X00_MAX_PRIMARY_GPIO) ? 1 : 0)
-+
-+/*
-+ * pin to minor mapping.
-+ * GPIO0-GPIO31, minor=0-31.
-+ * GPIO200-GPIO215, minor=32-47.
-+ */
-+typedef struct _au1x00_gpio_bit_ctl {
-+	int direction;	// The direction of this GPIO pin. 0: IN, 1: OUT.
-+	int data;	// Pin output when itized (0/1), or at the term. 0/1/-1 (tristate).
-+} au1x00_gpio_bit_ctl;
-+
-+typedef struct _au1x00_gpio_driver {
-+	const char	*driver_name;
-+	const char	*name;
-+	int		name_base;	/* offset of printed name */
-+	short		major;		/* major device number */
-+	short		minor_start;	/* start of minor device number*/
-+	short		num;		/* number of devices */
-+} au1x00_gpio_driver;
-+
- #ifdef __KERNEL__
--extern u32 get_au1000_avail_gpio_mask(void);
--extern int au1000gpio_tristate(u32 data);
--extern int au1000gpio_in(u32 *data);
--extern int au1000gpio_set(u32 data);
--extern int au1000gpio_clear(u32 data);
--extern int au1000gpio_out(u32 data);
-+extern u32 get_au1000_avail_gpio_mask(u32 *avail_gpio2);
-+extern int au1000gpio_tristate(u32 minor, u32 data);
-+extern int au1000gpio_in(u32 minor, u32 *data);
-+extern int au1000gpio_set(u32 minor, u32 data);
-+extern int au1000gpio_clear(u32 minor, u32 data);
-+extern int au1000gpio_out(u32 minor, u32 data);
-+extern int au1000gpio_bit_read(u32 minor, u32 *read_data);
-+extern int au1000gpio_bit_set(u32 minor);
-+extern int au1000gpio_bit_clear(u32 minor);
-+extern int au1000gpio_bit_tristate(u32 minor);
-+extern int check_minor_to_gpio(u32 minor);
-+extern int au1000gpio_bit_init(u32 minor, au1x00_gpio_bit_ctl *bit_opt);
-+extern int au1000gpio_bit_term(u32 minor, au1x00_gpio_bit_ctl *bit_opt);
-+
-+extern void gpio_register_devfs (au1x00_gpio_driver *driver, unsigned int flags, unsigned minor);
-+extern void gpio_unregister_devfs (au1x00_gpio_driver *driver, unsigned minor);
-+extern int gpio_register_driver(au1x00_gpio_driver *driver);
-+extern int gpio_unregister_driver(au1x00_gpio_driver *driver);
- #endif
- 
- #endif
-diff -Nur linux-2.4.32-rc1/include/asm-mips/au1000.h linux-2.4.32-rc1.mips/include/asm-mips/au1000.h
---- linux-2.4.32-rc1/include/asm-mips/au1000.h	2005-01-19 15:10:11.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/au1000.h	2005-01-30 09:01:28.000000000 +0100
-@@ -160,28 +160,356 @@
- #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
- #endif
- 
--/* SDRAM Controller */
-+/*
-+ * SDRAM Register Offsets
-+ */
- #if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
--#define MEM_SDMODE0                0xB4000000
--#define MEM_SDMODE1                0xB4000004
--#define MEM_SDMODE2                0xB4000008
--
--#define MEM_SDADDR0                0xB400000C
--#define MEM_SDADDR1                0xB4000010
--#define MEM_SDADDR2                0xB4000014
--
--#define MEM_SDREFCFG               0xB4000018
--#define MEM_SDPRECMD               0xB400001C
--#define MEM_SDAUTOREF              0xB4000020
--
--#define MEM_SDWRMD0                0xB4000024
--#define MEM_SDWRMD1                0xB4000028
--#define MEM_SDWRMD2                0xB400002C
-+#define MEM_SDMODE0		(0x0000)
-+#define MEM_SDMODE1		(0x0004)
-+#define MEM_SDMODE2		(0x0008)
-+#define MEM_SDADDR0		(0x000C)
-+#define MEM_SDADDR1		(0x0010)
-+#define MEM_SDADDR2		(0x0014)
-+#define MEM_SDREFCFG	(0x0018)
-+#define MEM_SDPRECMD	(0x001C)
-+#define MEM_SDAUTOREF	(0x0020)
-+#define MEM_SDWRMD0		(0x0024)
-+#define MEM_SDWRMD1		(0x0028)
-+#define MEM_SDWRMD2		(0x002C)
-+#define MEM_SDSLEEP		(0x0030)
-+#define MEM_SDSMCKE		(0x0034)
-+
-+#ifndef ASSEMBLER
-+/*typedef volatile struct
-+{
-+	uint32 sdmode0;
-+	uint32 sdmode1;
-+	uint32 sdmode2;
-+	uint32 sdaddr0;
-+	uint32 sdaddr1;
-+	uint32 sdaddr2;
-+	uint32 sdrefcfg;
-+	uint32 sdautoref;
-+	uint32 sdwrmd0;
-+	uint32 sdwrmd1;
-+	uint32 sdwrmd2;
-+	uint32 sdsleep;
-+	uint32 sdsmcke;
-+
-+} AU1X00_SDRAM;*/
-+#endif
-+
-+/*
-+ * MEM_SDMODE register content definitions
-+ */
-+#define MEM_SDMODE_F		(1<<22)
-+#define MEM_SDMODE_SR		(1<<21)
-+#define MEM_SDMODE_BS		(1<<20)
-+#define MEM_SDMODE_RS		(3<<18)
-+#define MEM_SDMODE_CS		(7<<15)
-+#define MEM_SDMODE_TRAS		(15<<11)
-+#define MEM_SDMODE_TMRD		(3<<9)
-+#define MEM_SDMODE_TWR		(3<<7)
-+#define MEM_SDMODE_TRP		(3<<5)
-+#define MEM_SDMODE_TRCD		(3<<3)
-+#define MEM_SDMODE_TCL		(7<<0)
-+
-+#define MEM_SDMODE_BS_2Bank	(0<<20)
-+#define MEM_SDMODE_BS_4Bank	(1<<20)
-+#define MEM_SDMODE_RS_11Row	(0<<18)
-+#define MEM_SDMODE_RS_12Row	(1<<18)
-+#define MEM_SDMODE_RS_13Row	(2<<18)
-+#define MEM_SDMODE_RS_N(N)	((N)<<18)
-+#define MEM_SDMODE_CS_7Col	(0<<15)
-+#define MEM_SDMODE_CS_8Col	(1<<15)
-+#define MEM_SDMODE_CS_9Col	(2<<15)
-+#define MEM_SDMODE_CS_10Col	(3<<15)
-+#define MEM_SDMODE_CS_11Col	(4<<15)
-+#define MEM_SDMODE_CS_N(N)		((N)<<15)
-+#define MEM_SDMODE_TRAS_N(N)	((N)<<11)
-+#define MEM_SDMODE_TMRD_N(N)	((N)<<9)
-+#define MEM_SDMODE_TWR_N(N)		((N)<<7)
-+#define MEM_SDMODE_TRP_N(N)		((N)<<5)
-+#define MEM_SDMODE_TRCD_N(N)	((N)<<3)
-+#define MEM_SDMODE_TCL_N(N)		((N)<<0)
-+
-+/*
-+ * MEM_SDADDR register contents definitions
-+ */
-+#define MEM_SDADDR_E			(1<<20)
-+#define MEM_SDADDR_CSBA			(0x03FF<<10)
-+#define MEM_SDADDR_CSMASK		(0x03FF<<0)
-+#define MEM_SDADDR_CSBA_N(N)	((N)&(0x03FF<<22)>>12)
-+#define MEM_SDADDR_CSMASK_N(N)	((N)&(0x03FF<<22)>>22)
-+
-+/*
-+ * MEM_SDREFCFG register content definitions
-+ */
-+#define MEM_SDREFCFG_TRC		(15<<28)
-+#define MEM_SDREFCFG_TRPM		(3<<26)
-+#define MEM_SDREFCFG_E			(1<<25)
-+#define MEM_SDREFCFG_RE			(0x1ffffff<<0)
-+#define MEM_SDREFCFG_TRC_N(N)	((N)<<MEM_SDREFCFG_TRC)
-+#define MEM_SDREFCFG_TRPM_N(N)	((N)<<MEM_SDREFCFG_TRPM)
-+#define MEM_SDREFCFG_REF_N(N)	(N)
-+#endif
-+
-+/***********************************************************************/
-+
-+/*
-+ * Au1550 SDRAM Register Offsets
-+ */
-+
-+/***********************************************************************/
-+
-+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-+#define MEM_SDMODE0		(0x0800)
-+#define MEM_SDMODE1		(0x0808)
-+#define MEM_SDMODE2		(0x0810)
-+#define MEM_SDADDR0		(0x0820)
-+#define MEM_SDADDR1		(0x0828)
-+#define MEM_SDADDR2		(0x0830)
-+#define MEM_SDCONFIGA	(0x0840)
-+#define MEM_SDCONFIGB	(0x0848)
-+#define MEM_SDSTAT		(0x0850)
-+#define MEM_SDERRADDR	(0x0858)
-+#define MEM_SDSTRIDE0	(0x0860)
-+#define MEM_SDSTRIDE1	(0x0868)
-+#define MEM_SDSTRIDE2	(0x0870)
-+#define MEM_SDWRMD0		(0x0880)
-+#define MEM_SDWRMD1		(0x0888)
-+#define MEM_SDWRMD2		(0x0890)
-+#define MEM_SDPRECMD	(0x08C0)
-+#define MEM_SDAUTOREF	(0x08C8)
-+#define MEM_SDSREF		(0x08D0)
-+#define MEM_SDSLEEP		MEM_SDSREF
-+
-+#ifndef ASSEMBLER
-+/*typedef volatile struct
-+{
-+	uint32 sdmode0;
-+	uint32 reserved0;
-+	uint32 sdmode1;
-+	uint32 reserved1;
-+	uint32 sdmode2;
-+	uint32 reserved2[3];
-+	uint32 sdaddr0;
-+	uint32 reserved3;
-+	uint32 sdaddr1;
-+	uint32 reserved4;
-+	uint32 sdaddr2;
-+	uint32 reserved5[3];
-+	uint32 sdconfiga;
-+	uint32 reserved6;
-+	uint32 sdconfigb;
-+	uint32 reserved7;
-+	uint32 sdstat;
-+	uint32 reserved8;
-+	uint32 sderraddr;
-+	uint32 reserved9;
-+	uint32 sdstride0;
-+	uint32 reserved10;
-+	uint32 sdstride1;
-+	uint32 reserved11;
-+	uint32 sdstride2;
-+	uint32 reserved12[3];
-+	uint32 sdwrmd0;
-+	uint32 reserved13;
-+	uint32 sdwrmd1;
-+	uint32 reserved14;
-+	uint32 sdwrmd2;
-+	uint32 reserved15[11];
-+	uint32 sdprecmd;
-+	uint32 reserved16;
-+	uint32 sdautoref;
-+	uint32 reserved17;
-+	uint32 sdsref;
-+
-+} AU1550_SDRAM;*/
-+#endif
-+#endif
-+
-+/*
-+ * Physical base addresses for integrated peripherals
-+ */
-+
-+#ifdef CONFIG_SOC_AU1000
-+#define	MEM_PHYS_ADDR		0x14000000
-+#define	STATIC_MEM_PHYS_ADDR	0x14001000
-+#define	DMA0_PHYS_ADDR		0x14002000
-+#define	DMA1_PHYS_ADDR		0x14002100
-+#define	DMA2_PHYS_ADDR		0x14002200
-+#define	DMA3_PHYS_ADDR		0x14002300
-+#define	DMA4_PHYS_ADDR		0x14002400
-+#define	DMA5_PHYS_ADDR		0x14002500
-+#define	DMA6_PHYS_ADDR		0x14002600
-+#define	DMA7_PHYS_ADDR		0x14002700
-+#define	IC0_PHYS_ADDR		0x10400000
-+#define	IC1_PHYS_ADDR		0x11800000
-+#define	AC97_PHYS_ADDR		0x10000000
-+#define	USBH_PHYS_ADDR		0x10100000
-+#define	USBD_PHYS_ADDR		0x10200000
-+#define	IRDA_PHYS_ADDR		0x10300000
-+#define	MAC0_PHYS_ADDR		0x10500000
-+#define	MAC1_PHYS_ADDR		0x10510000
-+#define	MACEN_PHYS_ADDR		0x10520000
-+#define	MACDMA0_PHYS_ADDR	0x14004000
-+#define	MACDMA1_PHYS_ADDR	0x14004200
-+#define	I2S_PHYS_ADDR		0x11000000
-+#define	UART0_PHYS_ADDR		0x11100000
-+#define	UART1_PHYS_ADDR		0x11200000
-+#define	UART2_PHYS_ADDR		0x11300000
-+#define	UART3_PHYS_ADDR		0x11400000
-+#define	SSI0_PHYS_ADDR		0x11600000
-+#define	SSI1_PHYS_ADDR		0x11680000
-+#define	SYS_PHYS_ADDR		0x11900000
-+#define PCMCIA_IO_PHYS_ADDR   0xF00000000
-+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
-+#endif
-+
-+/********************************************************************/
- 
--#define MEM_SDSLEEP                0xB4000030
--#define MEM_SDSMCKE                0xB4000034
-+#ifdef CONFIG_SOC_AU1500
-+#define	MEM_PHYS_ADDR		0x14000000
-+#define	STATIC_MEM_PHYS_ADDR	0x14001000
-+#define	DMA0_PHYS_ADDR		0x14002000
-+#define	DMA1_PHYS_ADDR		0x14002100
-+#define	DMA2_PHYS_ADDR		0x14002200
-+#define	DMA3_PHYS_ADDR		0x14002300
-+#define	DMA4_PHYS_ADDR		0x14002400
-+#define	DMA5_PHYS_ADDR		0x14002500
-+#define	DMA6_PHYS_ADDR		0x14002600
-+#define	DMA7_PHYS_ADDR		0x14002700
-+#define	IC0_PHYS_ADDR		0x10400000
-+#define	IC1_PHYS_ADDR		0x11800000
-+#define	AC97_PHYS_ADDR		0x10000000
-+#define	USBH_PHYS_ADDR		0x10100000
-+#define	USBD_PHYS_ADDR		0x10200000
-+#define PCI_PHYS_ADDR		0x14005000
-+#define	MAC0_PHYS_ADDR		0x11500000
-+#define	MAC1_PHYS_ADDR		0x11510000
-+#define	MACEN_PHYS_ADDR		0x11520000
-+#define	MACDMA0_PHYS_ADDR	0x14004000
-+#define	MACDMA1_PHYS_ADDR	0x14004200
-+#define	I2S_PHYS_ADDR		0x11000000
-+#define	UART0_PHYS_ADDR		0x11100000
-+#define	UART3_PHYS_ADDR		0x11400000
-+#define GPIO2_PHYS_ADDR		0x11700000
-+#define	SYS_PHYS_ADDR		0x11900000
-+#define PCI_MEM_PHYS_ADDR     0x400000000
-+#define PCI_IO_PHYS_ADDR      0x500000000
-+#define PCI_CONFIG0_PHYS_ADDR 0x600000000
-+#define PCI_CONFIG1_PHYS_ADDR 0x680000000
-+#define PCMCIA_IO_PHYS_ADDR   0xF00000000
-+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
- #endif
- 
-+/********************************************************************/
-+
-+#ifdef CONFIG_SOC_AU1100
-+#define	MEM_PHYS_ADDR		0x14000000
-+#define	STATIC_MEM_PHYS_ADDR	0x14001000
-+#define	DMA0_PHYS_ADDR		0x14002000
-+#define	DMA1_PHYS_ADDR		0x14002100
-+#define	DMA2_PHYS_ADDR		0x14002200
-+#define	DMA3_PHYS_ADDR		0x14002300
-+#define	DMA4_PHYS_ADDR		0x14002400
-+#define	DMA5_PHYS_ADDR		0x14002500
-+#define	DMA6_PHYS_ADDR		0x14002600
-+#define	DMA7_PHYS_ADDR		0x14002700
-+#define	IC0_PHYS_ADDR		0x10400000
-+#define SD0_PHYS_ADDR		0x10600000
-+#define SD1_PHYS_ADDR		0x10680000
-+#define	IC1_PHYS_ADDR		0x11800000
-+#define	AC97_PHYS_ADDR		0x10000000
-+#define	USBH_PHYS_ADDR		0x10100000
-+#define	USBD_PHYS_ADDR		0x10200000
-+#define	IRDA_PHYS_ADDR		0x10300000
-+#define	MAC0_PHYS_ADDR		0x10500000
-+#define	MACEN_PHYS_ADDR		0x10520000
-+#define	MACDMA0_PHYS_ADDR	0x14004000
-+#define	MACDMA1_PHYS_ADDR	0x14004200
-+#define	I2S_PHYS_ADDR		0x11000000
-+#define	UART0_PHYS_ADDR		0x11100000
-+#define	UART1_PHYS_ADDR		0x11200000
-+#define	UART3_PHYS_ADDR		0x11400000
-+#define	SSI0_PHYS_ADDR		0x11600000
-+#define	SSI1_PHYS_ADDR		0x11680000
-+#define GPIO2_PHYS_ADDR		0x11700000
-+#define	SYS_PHYS_ADDR		0x11900000
-+#define LCD_PHYS_ADDR		0x15000000
-+#define PCMCIA_IO_PHYS_ADDR   0xF00000000
-+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
-+#endif
-+
-+/***********************************************************************/
-+
-+#ifdef CONFIG_SOC_AU1550
-+#define	MEM_PHYS_ADDR		0x14000000
-+#define	STATIC_MEM_PHYS_ADDR	0x14001000
-+#define	IC0_PHYS_ADDR		0x10400000
-+#define	IC1_PHYS_ADDR		0x11800000
-+#define	USBH_PHYS_ADDR		0x14020000
-+#define	USBD_PHYS_ADDR		0x10200000
-+#define PCI_PHYS_ADDR		0x14005000
-+#define	MAC0_PHYS_ADDR		0x10500000
-+#define	MAC1_PHYS_ADDR		0x10510000
-+#define	MACEN_PHYS_ADDR		0x10520000
-+#define	MACDMA0_PHYS_ADDR	0x14004000
-+#define	MACDMA1_PHYS_ADDR	0x14004200
-+#define	UART0_PHYS_ADDR		0x11100000
-+#define	UART1_PHYS_ADDR		0x11200000
-+#define	UART3_PHYS_ADDR		0x11400000
-+#define GPIO2_PHYS_ADDR		0x11700000
-+#define	SYS_PHYS_ADDR		0x11900000
-+#define	DDMA_PHYS_ADDR		0x14002000
-+#define PE_PHYS_ADDR		0x14008000
-+#define PSC0_PHYS_ADDR	 	0x11A00000
-+#define PSC1_PHYS_ADDR	 	0x11B00000
-+#define PSC2_PHYS_ADDR	 	0x10A00000
-+#define PSC3_PHYS_ADDR	 	0x10B00000
-+#define PCI_MEM_PHYS_ADDR     0x400000000
-+#define PCI_IO_PHYS_ADDR      0x500000000
-+#define PCI_CONFIG0_PHYS_ADDR 0x600000000
-+#define PCI_CONFIG1_PHYS_ADDR 0x680000000
-+#define PCMCIA_IO_PHYS_ADDR   0xF00000000
-+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
-+#endif
-+
-+/***********************************************************************/
-+
-+#ifdef CONFIG_SOC_AU1200
-+#define	MEM_PHYS_ADDR		0x14000000
-+#define	STATIC_MEM_PHYS_ADDR	0x14001000
-+#define AES_PHYS_ADDR		0x10300000
-+#define CIM_PHYS_ADDR		0x14004000
-+#define	IC0_PHYS_ADDR		0x10400000
-+#define	IC1_PHYS_ADDR		0x11800000
-+#define USBM_PHYS_ADDR		0x14020000
-+#define	USBH_PHYS_ADDR		0x14020100
-+#define	UART0_PHYS_ADDR		0x11100000
-+#define	UART1_PHYS_ADDR		0x11200000
-+#define GPIO2_PHYS_ADDR		0x11700000
-+#define	SYS_PHYS_ADDR		0x11900000
-+#define	DDMA_PHYS_ADDR		0x14002000
-+#define PSC0_PHYS_ADDR	 	0x11A00000
-+#define PSC1_PHYS_ADDR	 	0x11B00000
-+#define PCMCIA_IO_PHYS_ADDR   0xF00000000
-+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
-+#define SD0_PHYS_ADDR		0x10600000
-+#define SD1_PHYS_ADDR		0x10680000
-+#define LCD_PHYS_ADDR		0x15000000
-+#define SWCNT_PHYS_ADDR		0x1110010C
-+#define MAEFE_PHYS_ADDR		0x14012000
-+#define MAEBE_PHYS_ADDR		0x14010000
-+#endif
-+
-+
- /* Static Bus Controller */
- #define MEM_STCFG0                 0xB4001000
- #define MEM_STTIME0                0xB4001004
-@@ -367,7 +695,7 @@
- #define AU1000_MAC0_ENABLE       0xB0520000
- #define AU1000_MAC1_ENABLE       0xB0520004
- #define NUM_ETH_INTERFACES 2
--#endif // CONFIG_SOC_AU1000
-+#endif /* CONFIG_SOC_AU1000 */
- 
- /* Au1500 */
- #ifdef CONFIG_SOC_AU1500
-@@ -438,7 +766,7 @@
- #define AU1500_MAC0_ENABLE       0xB1520000
- #define AU1500_MAC1_ENABLE       0xB1520004
- #define NUM_ETH_INTERFACES 2
--#endif // CONFIG_SOC_AU1500
-+#endif /* CONFIG_SOC_AU1500 */
- 
- /* Au1100 */
- #ifdef CONFIG_SOC_AU1100
-@@ -483,6 +811,22 @@
- #define AU1000_GPIO_13            45
- #define AU1000_GPIO_14            46
- #define AU1000_GPIO_15            47
-+#define AU1000_GPIO_16            48
-+#define AU1000_GPIO_17            49
-+#define AU1000_GPIO_18            50
-+#define AU1000_GPIO_19            51
-+#define AU1000_GPIO_20            52
-+#define AU1000_GPIO_21            53
-+#define AU1000_GPIO_22            54
-+#define AU1000_GPIO_23            55
-+#define AU1000_GPIO_24            56
-+#define AU1000_GPIO_25            57
-+#define AU1000_GPIO_26            58
-+#define AU1000_GPIO_27            59
-+#define AU1000_GPIO_28            60
-+#define AU1000_GPIO_29            61
-+#define AU1000_GPIO_30            62
-+#define AU1000_GPIO_31            63
- 
- #define UART0_ADDR                0xB1100000
- #define UART1_ADDR                0xB1200000
-@@ -494,7 +838,7 @@
- #define AU1100_ETH0_BASE	  0xB0500000
- #define AU1100_MAC0_ENABLE       0xB0520000
- #define NUM_ETH_INTERFACES 1
--#endif // CONFIG_SOC_AU1100
-+#endif /* CONFIG_SOC_AU1100 */
- 
- #ifdef CONFIG_SOC_AU1550
- #define AU1550_UART0_INT          0
-@@ -511,14 +855,14 @@
- #define AU1550_PSC1_INT           11
- #define AU1550_PSC2_INT           12
- #define AU1550_PSC3_INT           13
--#define AU1550_TOY_INT			  14
--#define AU1550_TOY_MATCH0_INT     15
--#define AU1550_TOY_MATCH1_INT     16
--#define AU1550_TOY_MATCH2_INT     17
--#define AU1550_RTC_INT            18
--#define AU1550_RTC_MATCH0_INT     19
--#define AU1550_RTC_MATCH1_INT     20
--#define AU1550_RTC_MATCH2_INT     21
-+#define AU1000_TOY_INT			  14
-+#define AU1000_TOY_MATCH0_INT     15
-+#define AU1000_TOY_MATCH1_INT     16
-+#define AU1000_TOY_MATCH2_INT     17
-+#define AU1000_RTC_INT            18
-+#define AU1000_RTC_MATCH0_INT     19
-+#define AU1000_RTC_MATCH1_INT     20
-+#define AU1000_RTC_MATCH2_INT     21
- #define AU1550_NAND_INT           23
- #define AU1550_USB_DEV_REQ_INT    24
- #define AU1550_USB_DEV_SUS_INT    25
-@@ -573,7 +917,7 @@
- #define AU1550_MAC0_ENABLE       0xB0520000
- #define AU1550_MAC1_ENABLE       0xB0520004
- #define NUM_ETH_INTERFACES 2
--#endif // CONFIG_SOC_AU1550
-+#endif /* CONFIG_SOC_AU1550 */
- 
- #ifdef CONFIG_SOC_AU1200
- #define AU1200_UART0_INT          0
-@@ -590,14 +934,14 @@
- #define AU1200_PSC1_INT           11
- #define AU1200_AES_INT            12
- #define AU1200_CAMERA_INT         13
--#define AU1200_TOY_INT			  14
--#define AU1200_TOY_MATCH0_INT     15
--#define AU1200_TOY_MATCH1_INT     16
--#define AU1200_TOY_MATCH2_INT     17
--#define AU1200_RTC_INT            18
--#define AU1200_RTC_MATCH0_INT     19
--#define AU1200_RTC_MATCH1_INT     20
--#define AU1200_RTC_MATCH2_INT     21
-+#define AU1000_TOY_INT			  14
-+#define AU1000_TOY_MATCH0_INT     15
-+#define AU1000_TOY_MATCH1_INT     16
-+#define AU1000_TOY_MATCH2_INT     17
-+#define AU1000_RTC_INT            18
-+#define AU1000_RTC_MATCH0_INT     19
-+#define AU1000_RTC_MATCH1_INT     20
-+#define AU1000_RTC_MATCH2_INT     21
- #define AU1200_NAND_INT           23
- #define AU1200_GPIO_204           24
- #define AU1200_GPIO_205           25
-@@ -605,6 +949,7 @@
- #define AU1200_GPIO_207           27
- #define AU1200_GPIO_208_215       28 // Logical OR of 208:215
- #define AU1200_USB_INT            29
-+#define AU1000_USB_HOST_INT		  AU1200_USB_INT
- #define AU1200_LCD_INT            30
- #define AU1200_MAE_BOTH_INT       31
- #define AU1000_GPIO_0             32
-@@ -643,21 +988,36 @@
- #define UART0_ADDR                0xB1100000
- #define UART1_ADDR                0xB1200000
- 
--#define USB_OHCI_BASE             0x14020000 // phys addr for ioremap
--#define USB_HOST_CONFIG           0xB4027ffc
-+#define USB_UOC_BASE              0x14020020
-+#define USB_UOC_LEN               0x20
-+#define USB_OHCI_BASE             0x14020100
-+#define USB_OHCI_LEN              0x100
-+#define USB_EHCI_BASE             0x14020200
-+#define USB_EHCI_LEN              0x100
-+#define USB_UDC_BASE              0x14022000
-+#define USB_UDC_LEN               0x2000
-+#define USB_MSR_BASE			  0xB4020000
-+#define USB_MSR_MCFG              4
-+#define USBMSRMCFG_OMEMEN         0
-+#define USBMSRMCFG_OBMEN          1
-+#define USBMSRMCFG_EMEMEN         2
-+#define USBMSRMCFG_EBMEN          3
-+#define USBMSRMCFG_DMEMEN         4
-+#define USBMSRMCFG_DBMEN          5
-+#define USBMSRMCFG_GMEMEN         6
-+#define USBMSRMCFG_OHCCLKEN       16
-+#define USBMSRMCFG_EHCCLKEN       17
-+#define USBMSRMCFG_UDCCLKEN       18
-+#define USBMSRMCFG_PHYPLLEN       19
-+#define USBMSRMCFG_RDCOMB         30
-+#define USBMSRMCFG_PFEN           31
- 
--// these are here for prototyping on au1550 (do not exist on au1200)
--#define AU1200_ETH0_BASE      0xB0500000
--#define AU1200_ETH1_BASE      0xB0510000
--#define AU1200_MAC0_ENABLE       0xB0520000
--#define AU1200_MAC1_ENABLE       0xB0520004
--#define NUM_ETH_INTERFACES 2
--#endif // CONFIG_SOC_AU1200
-+#endif /* CONFIG_SOC_AU1200 */
- 
- #define AU1000_LAST_INTC0_INT     31
-+#define AU1000_LAST_INTC1_INT     63
- #define AU1000_MAX_INTR           63
- 
--
- /* Programmable Counters 0 and 1 */
- #define SYS_BASE                   0xB1900000
- #define SYS_COUNTER_CNTRL          (SYS_BASE + 0x14)
-@@ -728,6 +1088,8 @@
-   #define I2S_CONTROL_D         (1<<1)
-   #define I2S_CONTROL_CE        (1<<0)
- 
-+#ifndef CONFIG_SOC_AU1200
-+
- /* USB Host Controller */
- #define USB_OHCI_LEN              0x00100000
- 
-@@ -773,6 +1135,8 @@
-   #define USBDEV_ENABLE (1<<1)
-   #define USBDEV_CE     (1<<0)
- 
-+#endif /* !CONFIG_SOC_AU1200 */
-+
- /* Ethernet Controllers  */
- 
- /* 4 byte offsets from AU1000_ETH_BASE */
-@@ -1171,6 +1535,37 @@
-   #define SYS_PF_PSC1_S1		(1 << 1)
-   #define SYS_PF_MUST_BE_SET		((1 << 5) | (1 << 2))
- 
-+/* Au1200 Only */
-+#ifdef CONFIG_SOC_AU1200
-+#define SYS_PINFUNC_DMA		(1<<31)
-+#define SYS_PINFUNC_S0A		(1<<30)
-+#define SYS_PINFUNC_S1A		(1<<29)
-+#define SYS_PINFUNC_LP0		(1<<28)
-+#define SYS_PINFUNC_LP1		(1<<27)
-+#define SYS_PINFUNC_LD16	(1<<26)
-+#define SYS_PINFUNC_LD8		(1<<25)
-+#define SYS_PINFUNC_LD1		(1<<24)
-+#define SYS_PINFUNC_LD0		(1<<23)
-+#define SYS_PINFUNC_P1A		(3<<21)
-+#define SYS_PINFUNC_P1B		(1<<20)
-+#define SYS_PINFUNC_FS3		(1<<19)
-+#define SYS_PINFUNC_P0A		(3<<17)
-+#define SYS_PINFUNC_CS		(1<<16)
-+#define SYS_PINFUNC_CIM		(1<<15)
-+#define SYS_PINFUNC_P1C		(1<<14)
-+#define SYS_PINFUNC_U1T		(1<<12)
-+#define SYS_PINFUNC_U1R		(1<<11)
-+#define SYS_PINFUNC_EX1		(1<<10)
-+#define SYS_PINFUNC_EX0		(1<<9)
-+#define SYS_PINFUNC_U0R		(1<<8)
-+#define SYS_PINFUNC_MC		(1<<7)
-+#define SYS_PINFUNC_S0B		(1<<6)
-+#define SYS_PINFUNC_S0C		(1<<5)
-+#define SYS_PINFUNC_P0B		(1<<4)
-+#define SYS_PINFUNC_U0T		(1<<3)
-+#define SYS_PINFUNC_S1B		(1<<2)
-+#endif
-+
- #define SYS_TRIOUTRD              0xB1900100
- #define SYS_TRIOUTCLR             0xB1900100
- #define SYS_OUTPUTRD              0xB1900108
-@@ -1298,7 +1693,6 @@
- #define SD1_XMIT_FIFO	0xB0680000
- #define SD1_RECV_FIFO	0xB0680004
- 
--
- #if defined (CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
- /* Au1500 PCI Controller */
- #define Au1500_CFG_BASE           0xB4005000 // virtual, kseg0 addr
-@@ -1388,9 +1782,60 @@
- 
- #endif
- 
-+#ifndef _LANGUAGE_ASSEMBLY
-+typedef volatile struct
-+{
-+	/* 0x0000 */ u32 toytrim;
-+	/* 0x0004 */ u32 toywrite;
-+	/* 0x0008 */ u32 toymatch0;
-+	/* 0x000C */ u32 toymatch1;
-+	/* 0x0010 */ u32 toymatch2;
-+	/* 0x0014 */ u32 cntrctrl;
-+	/* 0x0018 */ u32 scratch0;
-+	/* 0x001C */ u32 scratch1;
-+	/* 0x0020 */ u32 freqctrl0;
-+	/* 0x0024 */ u32 freqctrl1;
-+	/* 0x0028 */ u32 clksrc;
-+	/* 0x002C */ u32 pinfunc;
-+	/* 0x0030 */ u32 reserved0;
-+	/* 0x0034 */ u32 wakemsk;
-+	/* 0x0038 */ u32 endian;
-+	/* 0x003C */ u32 powerctrl;
-+	/* 0x0040 */ u32 toyread;
-+	/* 0x0044 */ u32 rtctrim;
-+	/* 0x0048 */ u32 rtcwrite;
-+	/* 0x004C */ u32 rtcmatch0;
-+	/* 0x0050 */ u32 rtcmatch1;
-+	/* 0x0054 */ u32 rtcmatch2;
-+	/* 0x0058 */ u32 rtcread;
-+	/* 0x005C */ u32 wakesrc;
-+	/* 0x0060 */ u32 cpupll;
-+	/* 0x0064 */ u32 auxpll;
-+	/* 0x0068 */ u32 reserved1;
-+	/* 0x006C */ u32 reserved2;
-+	/* 0x0070 */ u32 reserved3;
-+	/* 0x0074 */ u32 reserved4;
-+	/* 0x0078 */ u32 slppwr;
-+	/* 0x007C */ u32 sleep;
-+	/* 0x0080 */ u32 reserved5[32];
-+	/* 0x0100 */ u32 trioutrd;
-+#define trioutclr trioutrd
-+	/* 0x0104 */ u32 reserved6;
-+	/* 0x0108 */ u32 outputrd;
-+#define outputset outputrd
-+	/* 0x010C */ u32 outputclr;
-+	/* 0x0110 */ u32 pinstaterd;
-+#define pininputen pinstaterd
-+
-+} AU1X00_SYS;
-+
-+static AU1X00_SYS* const sys  = (AU1X00_SYS *)SYS_BASE;
-+
-+#endif
- /* Processor information base on prid.
-  * Copied from PowerPC.
-  */
-+#ifndef _LANGUAGE_ASSEMBLY
- struct cpu_spec {
- 	/* CPU is matched via (PRID & prid_mask) == prid_value */
- 	unsigned int	prid_mask;
-@@ -1404,3 +1849,6 @@
- extern struct cpu_spec		cpu_specs[];
- extern struct cpu_spec		*cur_cpu_spec[];
- #endif
-+
-+#endif
-+
-diff -Nur linux-2.4.32-rc1/include/asm-mips/au1000_pcmcia.h linux-2.4.32-rc1.mips/include/asm-mips/au1000_pcmcia.h
---- linux-2.4.32-rc1/include/asm-mips/au1000_pcmcia.h	2005-01-19 15:10:11.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/au1000_pcmcia.h	2005-01-30 09:01:28.000000000 +0100
-@@ -38,16 +38,41 @@
- #define AU1X_SOCK0_PHYS_MEM  0xF80000000
- 
- /* pcmcia socket 1 needs external glue logic so the memory map
-- * differs from board to board.
-+ * differs from board to board. the general rule is that
-+ * static bus address bit 26 should be used to decode socket 0
-+ * from socket 1. alas, some boards dont follow this...
-+ * These really belong in a board-specific header file...
-  */
--#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_PB1500)
--#define AU1X_SOCK1_IO        0xF08000000
--#define AU1X_SOCK1_PHYS_ATTR 0xF48000000
--#define AU1X_SOCK1_PHYS_MEM  0xF88000000
--#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
--#define AU1X_SOCK1_IO        0xF04000000
--#define AU1X_SOCK1_PHYS_ATTR 0xF44000000
--#define AU1X_SOCK1_PHYS_MEM  0xF84000000
-+#ifdef CONFIG_MIPS_PB1000
-+#define SOCK1_DECODE (1<<27)
-+#endif
-+#ifdef CONFIG_MIPS_DB1000
-+#define SOCK1_DECODE (1<<26)
-+#endif
-+#ifdef CONFIG_MIPS_DB1500
-+#define SOCK1_DECODE (1<<26)
-+#endif
-+#ifdef CONFIG_MIPS_DB1100
-+#define SOCK1_DECODE (1<<26)
-+#endif
-+#ifdef CONFIG_MIPS_DB1550
-+#define SOCK1_DECODE (1<<26)
-+#endif
-+#ifdef CONFIG_MIPS_DB1200
-+#define SOCK1_DECODE (1<<26)
-+#endif
-+#ifdef CONFIG_MIPS_PB1550
-+#define SOCK1_DECODE (1<<26)
-+#endif
-+#ifdef CONFIG_MIPS_PB1200
-+#define SOCK1_DECODE (1<<26)
-+#endif
-+
-+/* The board has a second PCMCIA socket */
-+#ifdef SOCK1_DECODE
-+#define AU1X_SOCK1_IO        (0xF00000000|SOCK1_DECODE)
-+#define AU1X_SOCK1_PHYS_ATTR (0xF40000000|SOCK1_DECODE)
-+#define AU1X_SOCK1_PHYS_MEM  (0xF80000000|SOCK1_DECODE)
- #endif
- 
- struct pcmcia_state {
-diff -Nur linux-2.4.32-rc1/include/asm-mips/au1100_mmc.h linux-2.4.32-rc1.mips/include/asm-mips/au1100_mmc.h
---- linux-2.4.32-rc1/include/asm-mips/au1100_mmc.h	2005-01-19 15:10:11.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/au1100_mmc.h	2005-01-30 09:01:28.000000000 +0100
-@@ -39,16 +39,22 @@
- #define __ASM_AU1100_MMC_H
- 
- 
--#define NUM_AU1100_MMC_CONTROLLERS	2
--
--
--#define AU1100_SD_IRQ	2
--
-+#if defined(CONFIG_SOC_AU1100)
-+#define NUM_MMC_CONTROLLERS	2
-+#define AU1X_MMC_INT AU1100_SD_INT
-+#endif
-+
-+#if defined(CONFIG_SOC_AU1200)
-+#define NUM_MMC_CONTROLLERS	2
-+#define AU1X_MMC_INT AU1200_SD_INT
-+#endif
- 
- #define SD0_BASE	0xB0600000
- #define SD1_BASE	0xB0680000
- 
- 
-+
-+
- /*
-  *  Register offsets.
-  */
-@@ -201,5 +207,12 @@
- #define SD_CMD_RT_1B	(0x00810000)
- 
- 
-+/* support routines required on a platform-specific basis */
-+extern void mmc_card_inserted(int _n_, int *_res_);
-+extern void mmc_card_writable(int _n_, int *_res_);
-+extern void mmc_power_on(int _n_);
-+extern void mmc_power_off(int _n_);
-+
-+
- #endif /* __ASM_AU1100_MMC_H */
- 
-diff -Nur linux-2.4.32-rc1/include/asm-mips/au1xxx_dbdma.h linux-2.4.32-rc1.mips/include/asm-mips/au1xxx_dbdma.h
---- linux-2.4.32-rc1/include/asm-mips/au1xxx_dbdma.h	2005-01-19 15:10:11.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/au1xxx_dbdma.h	2005-01-30 09:01:28.000000000 +0100
-@@ -43,7 +43,7 @@
- #define DDMA_GLOBAL_BASE	0xb4003000
- #define DDMA_CHANNEL_BASE	0xb4002000
- 
--typedef struct dbdma_global {
-+typedef volatile struct dbdma_global {
- 	u32	ddma_config;
- 	u32	ddma_intstat;
- 	u32	ddma_throttle;
-@@ -60,7 +60,7 @@
- 
- /* The structure of a DMA Channel.
- */
--typedef struct au1xxx_dma_channel {
-+typedef volatile struct au1xxx_dma_channel {
- 	u32	ddma_cfg;	/* See below */
- 	u32	ddma_desptr;	/* 32-byte aligned pointer to descriptor */
- 	u32	ddma_statptr;	/* word aligned pointer to status word */
-@@ -96,7 +96,7 @@
- /* "Standard" DDMA Descriptor.
-  * Must be 32-byte aligned.
-  */
--typedef struct au1xxx_ddma_desc {
-+typedef volatile struct au1xxx_ddma_desc {
- 	u32	dscr_cmd0;		/* See below */
- 	u32	dscr_cmd1;		/* See below */
- 	u32	dscr_source0;		/* source phys address */
-@@ -105,6 +105,12 @@
- 	u32	dscr_dest1;		/* See below */
- 	u32	dscr_stat;		/* completion status */
- 	u32	dscr_nxtptr;		/* Next descriptor pointer (mostly) */
-+	/* First 32bytes are HW specific!!!
-+	   Lets have some SW data following.. make sure its 32bytes
-+	 */
-+	u32	sw_status;
-+	u32 	sw_context;
-+	u32	sw_reserved[6];
- } au1x_ddma_desc_t;
- 
- #define DSCR_CMD0_V		(1 << 31)	/* Descriptor valid */
-@@ -123,6 +129,8 @@
- #define DSCR_CMD0_CV		(0x1 << 2)	/* Clear Valid when done */
- #define DSCR_CMD0_ST_MASK	(0x3 << 0)	/* Status instruction */
- 
-+#define SW_STATUS_INUSE		(1<<0)
-+
- /* Command 0 device IDs.
- */
- #ifdef CONFIG_SOC_AU1550
-@@ -169,8 +177,8 @@
- #define DSCR_CMD0_SDMS_RX0	9
- #define DSCR_CMD0_SDMS_TX1	10
- #define DSCR_CMD0_SDMS_RX1	11
--#define DSCR_CMD0_AES_TX	12
--#define DSCR_CMD0_AES_RX	13
-+#define DSCR_CMD0_AES_TX	13
-+#define DSCR_CMD0_AES_RX	12
- #define DSCR_CMD0_PSC0_TX	14
- #define DSCR_CMD0_PSC0_RX	15
- #define DSCR_CMD0_PSC1_TX	16
-@@ -189,6 +197,10 @@
- #define DSCR_CMD0_THROTTLE	30
- #define DSCR_CMD0_ALWAYS	31
- #define DSCR_NDEV_IDS		32
-+/* THis macro is used to find/create custom device types */
-+#define DSCR_DEV2CUSTOM_ID(x,d)	(((((x)&0xFFFF)<<8)|0x32000000)|((d)&0xFF))
-+#define DSCR_CUSTOM2DEV_ID(x)	((x)&0xFF)
-+
- 
- #define DSCR_CMD0_SID(x)	(((x) & 0x1f) << 25)
- #define DSCR_CMD0_DID(x)	(((x) & 0x1f) << 20)
-@@ -277,6 +289,43 @@
- */
- #define NUM_DBDMA_CHANS	16
- 
-+/*
-+ * Ddma API definitions
-+ * FIXME: may not fit to this header file
-+ */
-+typedef struct dbdma_device_table {
-+	u32		dev_id;
-+	u32		dev_flags;
-+	u32		dev_tsize;
-+	u32		dev_devwidth;
-+	u32		dev_physaddr;		/* If FIFO */
-+	u32		dev_intlevel;
-+	u32		dev_intpolarity;
-+} dbdev_tab_t;
-+
-+
-+typedef struct dbdma_chan_config {
-+	spinlock_t      lock;
-+
-+	u32			chan_flags;
-+	u32			chan_index;
-+	dbdev_tab_t		*chan_src;
-+	dbdev_tab_t		*chan_dest;
-+	au1x_dma_chan_t		*chan_ptr;
-+	au1x_ddma_desc_t	*chan_desc_base;
-+	au1x_ddma_desc_t	*get_ptr, *put_ptr, *cur_ptr;
-+	void			*chan_callparam;
-+	void (*chan_callback)(int, void *, struct pt_regs *);
-+} chan_tab_t;
-+
-+#define DEV_FLAGS_INUSE		(1 << 0)
-+#define DEV_FLAGS_ANYUSE	(1 << 1)
-+#define DEV_FLAGS_OUT		(1 << 2)
-+#define DEV_FLAGS_IN		(1 << 3)
-+#define DEV_FLAGS_BURSTABLE (1 << 4)
-+#define DEV_FLAGS_SYNC		(1 << 5)
-+/* end Ddma API definitions */
-+
- /* External functions for drivers to use.
- */
- /* Use this to allocate a dbdma channel.  The device ids are one of the
-@@ -299,8 +348,8 @@
- 
- /* Put buffers on source/destination descriptors.
- */
--u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes);
--u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes);
-+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
-+u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
- 
- /* Get a buffer from the destination descriptor.
- */
-@@ -314,5 +363,25 @@
- void au1xxx_dbdma_chan_free(u32 chanid);
- void au1xxx_dbdma_dump(u32 chanid);
- 
-+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr );
-+
-+u32 au1xxx_ddma_add_device( dbdev_tab_t *dev );
-+
-+/*
-+ 	Some compatibilty macros --
-+		Needed to make changes to API without breaking existing drivers
-+*/
-+#define	au1xxx_dbdma_put_source(chanid,buf,nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
-+#define	au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
-+
-+#define au1xxx_dbdma_put_dest(chanid,buf,nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
-+#define	au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
-+
-+/*
-+ *	Flags for the put_source/put_dest functions.
-+ */
-+#define DDMA_FLAGS_IE	(1<<0)
-+#define DDMA_FLAGS_NOIE (1<<1)
-+
- #endif /* _LANGUAGE_ASSEMBLY */
- #endif /* _AU1000_DBDMA_H_ */
-diff -Nur linux-2.4.32-rc1/include/asm-mips/au1xxx_gpio.h linux-2.4.32-rc1.mips/include/asm-mips/au1xxx_gpio.h
---- linux-2.4.32-rc1/include/asm-mips/au1xxx_gpio.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/au1xxx_gpio.h	2005-01-30 09:01:28.000000000 +0100
-@@ -0,0 +1,22 @@
-+
-+
-+#ifndef __AU1XXX_GPIO_H
-+#define __AU1XXX_GPIO_H
-+
-+void au1xxx_gpio1_set_inputs(void);
-+void au1xxx_gpio_tristate(int signal);
-+void au1xxx_gpio_write(int signal, int value);
-+int  au1xxx_gpio_read(int signal);
-+
-+typedef volatile struct
-+{
-+	u32 dir;
-+	u32 reserved;
-+	u32 output;
-+	u32 pinstate;
-+	u32 inten;
-+	u32 enable;
-+
-+} AU1X00_GPIO2;
-+
-+#endif //__AU1XXX_GPIO_H
-diff -Nur linux-2.4.32-rc1/include/asm-mips/au1xxx_psc.h linux-2.4.32-rc1.mips/include/asm-mips/au1xxx_psc.h
---- linux-2.4.32-rc1/include/asm-mips/au1xxx_psc.h	2005-01-19 15:10:11.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/au1xxx_psc.h	2005-01-30 09:01:28.000000000 +0100
-@@ -41,6 +41,11 @@
- #define PSC3_BASE_ADDR		0xb0d00000
- #endif
- 
-+#ifdef CONFIG_SOC_AU1200
-+#define PSC0_BASE_ADDR		0xb1a00000
-+#define PSC1_BASE_ADDR		0xb1b00000
-+#endif
-+
- /* The PSC select and control registers are common to
-  * all protocols.
-  */
-@@ -226,6 +231,8 @@
- #define PSC_I2SCFG_DD_DISABLE	(1 << 27)
- #define PSC_I2SCFG_DE_ENABLE	(1 << 26)
- #define PSC_I2SCFG_SET_WS(x)	(((((x) / 2) - 1) & 0x7f) << 16)
-+#define PSC_I2SCFG_WS(n)		((n&0xFF)<<16)
-+#define PSC_I2SCFG_WS_MASK	(PSC_I2SCFG_WS(0x3F))
- #define PSC_I2SCFG_WI		(1 << 15)
- 
- #define PSC_I2SCFG_DIV_MASK	(3 << 13)
-diff -Nur linux-2.4.32-rc1/include/asm-mips/bootinfo.h linux-2.4.32-rc1.mips/include/asm-mips/bootinfo.h
---- linux-2.4.32-rc1/include/asm-mips/bootinfo.h	2004-02-18 14:36:32.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/bootinfo.h	2005-01-30 09:01:28.000000000 +0100
-@@ -180,6 +180,9 @@
- #define MACH_MTX1		7	/* 4G MTX-1 Au1500-based board */
- #define MACH_CSB250		8	/* Cogent Au1500 */
- #define MACH_PB1550     	9       /* Au1550-based eval board */
-+#define MACH_PB1200     	10      /* Au1200-based eval board */
-+#define MACH_DB1550     	11      /* Au1550-based eval board */
-+#define MACH_DB1200     	12      /* Au1200-based eval board */
- 
- /*
-  * Valid machtype for group NEC_VR41XX
-diff -Nur linux-2.4.32-rc1/include/asm-mips/db1200.h linux-2.4.32-rc1.mips/include/asm-mips/db1200.h
---- linux-2.4.32-rc1/include/asm-mips/db1200.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/db1200.h	2005-01-30 09:02:45.000000000 +0100
-@@ -0,0 +1,214 @@
-+/*
-+ * AMD Alchemy DB1200 Referrence Board
-+ * Board Registers defines.
-+ *
-+ * ########################################################################
-+ *
-+ *  This program is free software; you can distribute it and/or modify it
-+ *  under the terms of the GNU General Public License (Version 2) as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  This program is distributed in the hope it will be useful, but WITHOUT
-+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ *  for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License along
-+ *  with this program; if not, write to the Free Software Foundation, Inc.,
-+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ *
-+ */
-+#ifndef __ASM_DB1200_H
-+#define __ASM_DB1200_H
-+
-+#include <linux/types.h>
-+
-+// This is defined in au1000.h with bogus value
-+#undef AU1X00_EXTERNAL_INT
-+
-+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-+
-+/* SPI and SMB are muxed on the Pb1200 board.
-+   Refer to board documentation.
-+ */
-+#define SPI_PSC_BASE        PSC0_BASE_ADDR
-+#define SMBUS_PSC_BASE      PSC0_BASE_ADDR
-+/* AC97 and I2S are muxed on the Pb1200 board.
-+   Refer to board documentation.
-+ */
-+#define AC97_PSC_BASE       PSC1_BASE_ADDR
-+#define I2S_PSC_BASE		PSC1_BASE_ADDR
-+
-+#define BCSR_KSEG1_ADDR 0xB9800000
-+
-+typedef volatile struct
-+{
-+	/*00*/	u16 whoami;
-+		u16 reserved0;
-+	/*04*/	u16 status;
-+		u16 reserved1;
-+	/*08*/	u16 switches;
-+		u16 reserved2;
-+	/*0C*/	u16 resets;
-+		u16 reserved3;
-+
-+	/*10*/	u16 pcmcia;
-+		u16 reserved4;
-+	/*14*/	u16 board;
-+		u16 reserved5;
-+	/*18*/	u16 disk_leds;
-+		u16 reserved6;
-+	/*1C*/	u16 system;
-+		u16 reserved7;
-+
-+	/*20*/	u16 intclr;
-+		u16 reserved8;
-+	/*24*/	u16 intset;
-+		u16 reserved9;
-+	/*28*/	u16 intclr_mask;
-+		u16 reserved10;
-+	/*2C*/	u16 intset_mask;
-+		u16 reserved11;
-+
-+	/*30*/	u16 sig_status;
-+		u16 reserved12;
-+	/*34*/	u16 int_status;
-+		u16 reserved13;
-+	/*38*/	u16 reserved14;
-+		u16 reserved15;
-+	/*3C*/	u16 reserved16;
-+		u16 reserved17;
-+
-+} BCSR;
-+
-+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+
-+/*
-+ * Register bit definitions for the BCSRs
-+ */
-+#define BCSR_WHOAMI_DCID	0x000F
-+#define BCSR_WHOAMI_CPLD	0x00F0
-+#define BCSR_WHOAMI_BOARD	0x0F00
-+
-+#define BCSR_STATUS_PCMCIA0VS	0x0003
-+#define BCSR_STATUS_PCMCIA1VS	0x000C
-+#define BCSR_STATUS_SWAPBOOT	0x0040
-+#define BCSR_STATUS_FLASHBUSY	0x0100
-+#define BCSR_STATUS_IDECBLID	0x0200
-+#define BCSR_STATUS_SD0WP		0x0400
-+#define BCSR_STATUS_U0RXD		0x1000
-+#define BCSR_STATUS_U1RXD		0x2000
-+
-+#define BCSR_SWITCHES_OCTAL	0x00FF
-+#define BCSR_SWITCHES_DIP_1	0x0080
-+#define BCSR_SWITCHES_DIP_2	0x0040
-+#define BCSR_SWITCHES_DIP_3	0x0020
-+#define BCSR_SWITCHES_DIP_4	0x0010
-+#define BCSR_SWITCHES_DIP_5	0x0008
-+#define BCSR_SWITCHES_DIP_6	0x0004
-+#define BCSR_SWITCHES_DIP_7	0x0002
-+#define BCSR_SWITCHES_DIP_8	0x0001
-+#define BCSR_SWITCHES_ROTARY	0x0F00
-+
-+#define BCSR_RESETS_ETH		0x0001
-+#define BCSR_RESETS_CAMERA	0x0002
-+#define BCSR_RESETS_DC		0x0004
-+#define BCSR_RESETS_IDE		0x0008
-+#define BCSR_RESETS_TV		0x0010
-+/* not resets but in the same register */
-+#define BCSR_RESETS_PWMR1mUX 0x0800
-+#define BCSR_RESETS_PCS0MUX	0x1000
-+#define BCSR_RESETS_PCS1MUX	0x2000
-+#define BCSR_RESETS_SPISEL	0x4000
-+
-+#define BCSR_PCMCIA_PC0VPP	0x0003
-+#define BCSR_PCMCIA_PC0VCC	0x000C
-+#define BCSR_PCMCIA_PC0DRVEN	0x0010
-+#define BCSR_PCMCIA_PC0RST	0x0080
-+#define BCSR_PCMCIA_PC1VPP	0x0300
-+#define BCSR_PCMCIA_PC1VCC	0x0C00
-+#define BCSR_PCMCIA_PC1DRVEN	0x1000
-+#define BCSR_PCMCIA_PC1RST	0x8000
-+
-+#define BCSR_BOARD_LCDVEE	0x0001
-+#define BCSR_BOARD_LCDVDD	0x0002
-+#define BCSR_BOARD_LCDBL	0x0004
-+#define BCSR_BOARD_CAMSNAP	0x0010
-+#define BCSR_BOARD_CAMPWR	0x0020
-+#define BCSR_BOARD_SD0PWR	0x0040
-+
-+#define BCSR_LEDS_DECIMALS	0x0003
-+#define BCSR_LEDS_LED0		0x0100
-+#define BCSR_LEDS_LED1		0x0200
-+#define BCSR_LEDS_LED2		0x0400
-+#define BCSR_LEDS_LED3		0x0800
-+
-+#define BCSR_SYSTEM_POWEROFF	0x4000
-+#define BCSR_SYSTEM_RESET	0x8000
-+
-+/* Bit positions for the different interrupt sources */
-+#define BCSR_INT_IDE		0x0001
-+#define BCSR_INT_ETH		0x0002
-+#define BCSR_INT_PC0		0x0004
-+#define BCSR_INT_PC0STSCHG	0x0008
-+#define BCSR_INT_PC1		0x0010
-+#define BCSR_INT_PC1STSCHG	0x0020
-+#define BCSR_INT_DC			0x0040
-+#define BCSR_INT_FLASHBUSY	0x0080
-+#define BCSR_INT_PC0INSERT	0x0100
-+#define BCSR_INT_PC0EJECT	0x0200
-+#define BCSR_INT_PC1INSERT	0x0400
-+#define BCSR_INT_PC1EJECT	0x0800
-+#define BCSR_INT_SD0INSERT	0x1000
-+#define BCSR_INT_SD0EJECT	0x2000
-+
-+#define AU1XXX_SMC91111_PHYS_ADDR	(0x19000300)
-+#define AU1XXX_SMC91111_IRQ			DB1200_ETH_INT
-+
-+#define AU1XXX_ATA_PHYS_ADDR		(0x18800000)
-+#define AU1XXX_ATA_PHYS_LEN			(0x100)
-+#define AU1XXX_ATA_REG_OFFSET	(5)
-+#define AU1XXX_ATA_INT			DB1200_IDE_INT
-+#define AU1XXX_ATA_DDMA_REQ		DSCR_CMD0_DMA_REQ1;
-+#define AU1XXX_ATA_RQSIZE		128
-+
-+#define NAND_PHYS_ADDR   0x20000000
-+
-+/*
-+ *	External Interrupts for Pb1200 as of 8/6/2004.
-+ *   Bit positions in the CPLD registers can be calculated by taking
-+ *   the interrupt define and subtracting the DB1200_INT_BEGIN value.
-+ *    *example: IDE bis pos is  = 64 - 64
-+                ETH bit pos is  = 65 - 64
-+ */
-+#define DB1200_INT_BEGIN		(AU1000_LAST_INTC1_INT + 1)
-+#define DB1200_IDE_INT			(DB1200_INT_BEGIN + 0)
-+#define DB1200_ETH_INT			(DB1200_INT_BEGIN + 1)
-+#define DB1200_PC0_INT			(DB1200_INT_BEGIN + 2)
-+#define DB1200_PC0_STSCHG_INT	(DB1200_INT_BEGIN + 3)
-+#define DB1200_PC1_INT			(DB1200_INT_BEGIN + 4)
-+#define DB1200_PC1_STSCHG_INT	(DB1200_INT_BEGIN + 5)
-+#define DB1200_DC_INT			(DB1200_INT_BEGIN + 6)
-+#define DB1200_FLASHBUSY_INT	(DB1200_INT_BEGIN + 7)
-+#define DB1200_PC0_INSERT_INT	(DB1200_INT_BEGIN + 8)
-+#define DB1200_PC0_EJECT_INT	(DB1200_INT_BEGIN + 9)
-+#define DB1200_PC1_INSERT_INT	(DB1200_INT_BEGIN + 10)
-+#define DB1200_PC1_EJECT_INT	(DB1200_INT_BEGIN + 11)
-+#define DB1200_SD0_INSERT_INT	(DB1200_INT_BEGIN + 12)
-+#define DB1200_SD0_EJECT_INT	(DB1200_INT_BEGIN + 13)
-+
-+#define DB1200_INT_END			(DB1200_INT_BEGIN + 15)
-+
-+/* For drivers/pcmcia/au1000_db1x00.c */
-+#define BOARD_PC0_INT DB1200_PC0_INT
-+#define BOARD_PC1_INT DB1200_PC1_INT
-+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
-+
-+#endif /* __ASM_DB1200_H */
-+
-diff -Nur linux-2.4.32-rc1/include/asm-mips/db1x00.h linux-2.4.32-rc1.mips/include/asm-mips/db1x00.h
---- linux-2.4.32-rc1/include/asm-mips/db1x00.h	2005-01-19 15:10:11.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/db1x00.h	2005-01-30 09:06:19.000000000 +0100
-@@ -1,5 +1,5 @@
- /*
-- * AMD Alchemy DB1x00 Reference Boards
-+ * AMD Alchemy DB1x00 Reference Boards (BUT NOT DB1200)
-  *
-  * Copyright 2001 MontaVista Software Inc.
-  * Author: MontaVista Software, Inc.
-@@ -36,9 +36,18 @@
- #define AC97_PSC_BASE       PSC1_BASE_ADDR
- #define SMBUS_PSC_BASE      PSC2_BASE_ADDR
- #define I2S_PSC_BASE        PSC3_BASE_ADDR
-+#define NAND_CS 1
-+/* for drivers/pcmcia/au1000_db1x00.c */
-+#define BOARD_PC0_INT AU1000_GPIO_3
-+#define BOARD_PC1_INT AU1000_GPIO_5
-+#define BOARD_CARD_INSERTED(SOCKET) !(bcsr->status & (1<<(4+SOCKET)))
- 
- #else
- #define BCSR_KSEG1_ADDR 0xAE000000
-+/* for drivers/pcmcia/au1000_db1x00.c */
-+#define BOARD_PC0_INT AU1000_GPIO_2
-+#define BOARD_PC1_INT AU1000_GPIO_5
-+#define BOARD_CARD_INSERTED(SOCKET) !(bcsr->status & (1<<(4+SOCKET)))
- #endif
- 
- /*
-@@ -66,6 +75,7 @@
- 
- } BCSR;
- 
-+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
- 
- /*
-  * Register/mask bit definitions for the BCSRs
-@@ -130,14 +140,6 @@
- 
- #define BCSR_SWRESET_RESET		0x0080
- 
--/* PCMCIA Db1x00 specific defines */
--#define PCMCIA_MAX_SOCK 1
--#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
--
--/* VPP/VCC */
--#define SET_VCC_VPP(VCC, VPP, SLOT)\
--	((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
--
- /* MTD CONFIG OPTIONS */
- #if defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER)
- #define DB1X00_BOTH_BANKS
-@@ -147,48 +149,15 @@
- #define DB1X00_USER_ONLY
- #endif
- 
--/* SD controller macros */
--/*
-- * Detect card.
-- */
--#define mmc_card_inserted(_n_, _res_) \
--	do { \
--		BCSR * const bcsr = (BCSR *)0xAE000000; \
--		unsigned long mmc_wp, board_specific; \
--		if ((_n_)) { \
--			mmc_wp = BCSR_BOARD_SD1_WP; \
--		} else { \
--			mmc_wp = BCSR_BOARD_SD0_WP; \
--		} \
--		board_specific = au_readl((unsigned long)(&bcsr->specific)); \
--		if (!(board_specific & mmc_wp)) {/* low means card present */ \
--			*(int *)(_res_) = 1; \
--		} else { \
--			*(int *)(_res_) = 0; \
--		} \
--	} while (0)
--
-+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) && defined(CONFIG_MIPS_DB1550)
- /*
-- * Apply power to card slot(s).
-+ * Daughter card information.
-  */
--#define mmc_power_on(_n_) \
--	do { \
--		BCSR * const bcsr = (BCSR *)0xAE000000; \
--		unsigned long mmc_pwr, mmc_wp, board_specific; \
--		if ((_n_)) { \
--			mmc_pwr = BCSR_BOARD_SD1_PWR; \
--			mmc_wp = BCSR_BOARD_SD1_WP; \
--		} else { \
--			mmc_pwr = BCSR_BOARD_SD0_PWR; \
--			mmc_wp = BCSR_BOARD_SD0_WP; \
--		} \
--		board_specific = au_readl((unsigned long)(&bcsr->specific)); \
--		if (!(board_specific & mmc_wp)) {/* low means card present */ \
--			board_specific |= mmc_pwr; \
--			au_writel(board_specific, (int)(&bcsr->specific)); \
--			au_sync(); \
--		} \
--	} while (0)
-+#define DAUGHTER_CARD_IRQ		(AU1000_GPIO_8)
-+/* DC_IDE */
-+#define AU1XXX_ATA_PHYS_ADDR		(0x0C000000)
-+#define AU1XXX_ATA_REG_OFFSET		(5)	
-+#endif /* CONFIG_MIPS_DB1550 */
- 
- #endif /* __ASM_DB1X00_H */
- 
-diff -Nur linux-2.4.32-rc1/include/asm-mips/elf.h linux-2.4.32-rc1.mips/include/asm-mips/elf.h
---- linux-2.4.32-rc1/include/asm-mips/elf.h	2004-02-18 14:36:32.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/elf.h	2005-04-14 12:41:44.000000000 +0200
-@@ -66,9 +66,10 @@
- #define USE_ELF_CORE_DUMP
- #define ELF_EXEC_PAGESIZE	PAGE_SIZE
- 
--#define ELF_CORE_COPY_REGS(_dest,_regs)				\
--	memcpy((char *) &_dest, (char *) _regs,			\
--	       sizeof(struct pt_regs));
-+extern void dump_regs(elf_greg_t *, struct pt_regs *regs);
-+
-+#define ELF_CORE_COPY_REGS(elf_regs, regs)			\
-+	dump_regs((elf_greg_t *)&(elf_regs), regs);
- 
- /* This yields a mask that user programs can use to figure out what
-    instruction set this cpu supports.  This could be done in userspace,
-diff -Nur linux-2.4.32-rc1/include/asm-mips/ficmmp.h linux-2.4.32-rc1.mips/include/asm-mips/ficmmp.h
---- linux-2.4.32-rc1/include/asm-mips/ficmmp.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/ficmmp.h	2005-01-30 09:01:28.000000000 +0100
-@@ -0,0 +1,156 @@
-+/*
-+ * FIC MMP
-+ *
-+ * ########################################################################
-+ *
-+ *  This program is free software; you can distribute it and/or modify it
-+ *  under the terms of the GNU General Public License (Version 2) as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  This program is distributed in the hope it will be useful, but WITHOUT
-+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ *  for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License along
-+ *  with this program; if not, write to the Free Software Foundation, Inc.,
-+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ *
-+ */
-+#ifndef __ASM_FICMMP_H
-+#define __ASM_FICMMP_H
-+
-+#include <linux/types.h>
-+#include <asm/au1000.h>
-+#include <asm/au1xxx_gpio.h>
-+
-+// This is defined in au1000.h with bogus value
-+#undef AU1X00_EXTERNAL_INT
-+
-+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-+/* SPI and SMB are muxed on the Pb1200 board.
-+   Refer to board documentation.
-+ */
-+#define SPI_PSC_BASE        PSC0_BASE_ADDR
-+#define SMBUS_PSC_BASE      PSC0_BASE_ADDR
-+/* AC97 and I2S are muxed on the Pb1200 board.
-+   Refer to board documentation.
-+ */
-+#define AC97_PSC_BASE       PSC1_BASE_ADDR
-+#define I2S_PSC_BASE		PSC1_BASE_ADDR
-+
-+
-+/*
-+ * SMSC LAN91C111
-+ */
-+#define AU1XXX_SMC91111_PHYS_ADDR	(0xAC000300)
-+#define AU1XXX_SMC91111_IRQ			AU1000_GPIO_5
-+
-+/* DC_IDE and DC_ETHERNET */
-+#define FICMMP_IDE_INT	AU1000_GPIO_4
-+
-+#define AU1XXX_ATA_PHYS_ADDR	(0x0C800000)
-+#define AU1XXX_ATA_REG_OFFSET	(5)
-+/*
-+#define AU1XXX_ATA_BASE		(0x0C800000)
-+#define AU1XXX_ATA_END			(0x0CFFFFFF)
-+#define AU1XXX_ATA_MEM_SIZE		(AU1XXX_ATA_END - AU1XXX_ATA_BASE +1)
-+
-+#define AU1XXX_ATA_REG_OFFSET		(5)
-+*/
-+/* VPP/VCC */
-+#define SET_VCC_VPP(VCC, VPP, SLOT)\
-+	((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-+
-+	
-+#define FICMMP_CONFIG_BASE		0xAD000000
-+#define FICMMP_CONFIG_ENABLE	13
-+
-+#define FICMMP_CONFIG_I2SFREQ(N)	(N<<0)
-+#define FICMMP_CONFIG_I2SXTAL0		(1<<0)
-+#define FICMMP_CONFIG_I2SXTAL1		(1<<1)
-+#define FICMMP_CONFIG_I2SXTAL2		(1<<2)
-+#define FICMMP_CONFIG_I2SXTAL3		(1<<3)
-+#define FICMMP_CONFIG_ADV1			(1<<4)
-+#define FICMMP_CONFIG_IDERST		(1<<5)
-+#define FICMMP_CONFIG_LCMEN			(1<<6)
-+#define FICMMP_CONFIG_CAMPWDN		(1<<7)
-+#define FICMMP_CONFIG_USBPWREN		(1<<8)
-+#define FICMMP_CONFIG_LCMPWREN		(1<<9)
-+#define FICMMP_CONFIG_TVOUTPWREN	(1<<10)
-+#define FICMMP_CONFIG_RS232PWREN	(1<<11)
-+#define FICMMP_CONFIG_LCMDATAOUT	(1<<12)
-+#define FICMMP_CONFIG_TVODATAOUT	(1<<13)
-+#define FICMMP_CONFIG_ADV3			(1<<14)
-+#define FICMMP_CONFIG_ADV4			(1<<15)
-+
-+#define I2S_FREQ_8_192				(0x0)
-+#define I2S_FREQ_11_2896			(0x1)
-+#define I2S_FREQ_12_288				(0x2)
-+#define I2S_FREQ_24_576				(0x3)
-+//#define I2S_FREQ_12_288			(0x4)
-+#define I2S_FREQ_16_9344			(0x5)
-+#define I2S_FREQ_18_432				(0x6)
-+#define I2S_FREQ_36_864				(0x7)
-+#define I2S_FREQ_16_384				(0x8)
-+#define I2S_FREQ_22_5792			(0x9)
-+//#define I2S_FREQ_24_576			(0x10)
-+#define I2S_FREQ_49_152				(0x11)
-+//#define I2S_FREQ_24_576			(0x12)
-+#define I2S_FREQ_33_8688			(0x13)
-+//#define I2S_FREQ_36_864			(0x14)
-+#define I2S_FREQ_73_728				(0x15)
-+
-+#define FICMMP_IDE_PWR				9
-+#define FICMMP_FOCUS_RST			2
-+
-+static __inline void ficmmp_config_set(u16 bits)
-+{
-+	extern u16 ficmmp_config;
-+	//printk("set_config: %X, Old: %X, New: %X\n", bits, ficmmp_config, ficmmp_config | bits);
-+	ficmmp_config |= bits;
-+	*((u16*)FICMMP_CONFIG_BASE) = ficmmp_config;
-+}
-+
-+static __inline void ficmmp_config_clear(u16 bits)
-+{
-+	extern u16 ficmmp_config;
-+//	printk("clear_config: %X, Old: %X, New: %X\n", bits, ficmmp_config, ficmmp_config & ~bits);
-+	ficmmp_config &= ~bits;
-+	*((u16*)FICMMP_CONFIG_BASE) = ficmmp_config;
-+}
-+
-+static __inline void ficmmp_config_init(void)
-+{
-+	au1xxx_gpio_write(FICMMP_CONFIG_ENABLE, 0);	//Enable configuration latch
-+	ficmmp_config_set(FICMMP_CONFIG_LCMDATAOUT | FICMMP_CONFIG_TVODATAOUT | FICMMP_CONFIG_IDERST);  //Disable display data buffers
-+	ficmmp_config_set(FICMMP_CONFIG_I2SFREQ(I2S_FREQ_36_864));
-+}
-+
-+static __inline u32 ficmmp_set_i2s_sample_rate(u32 rate)
-+{
-+	u32 freq;
-+	
-+	switch(rate)
-+	{
-+	case 88200: 
-+	case 44100:
-+	case  8018: freq = I2S_FREQ_11_2896; break;
-+	case 48000:
-+	case 32000: //freq = I2S_FREQ_18_432; break;
-+	case  8000: freq = I2S_FREQ_12_288; break;
-+	default:    freq = I2S_FREQ_12_288; rate = 8000; 
-+	}
-+	ficmmp_config_clear(FICMMP_CONFIG_I2SFREQ(0xF));
-+	ficmmp_config_set(FICMMP_CONFIG_I2SFREQ(freq));
-+	return rate;
-+}
-+
-+#endif /* __ASM_FICMMP_H */
-+
-diff -Nur linux-2.4.32-rc1/include/asm-mips/hazards.h linux-2.4.32-rc1.mips/include/asm-mips/hazards.h
---- linux-2.4.32-rc1/include/asm-mips/hazards.h	2004-02-18 14:36:32.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/hazards.h	2005-06-06 16:46:22.000000000 +0200
-@@ -3,7 +3,7 @@
-  * License.  See the file "COPYING" in the main directory of this archive
-  * for more details.
-  *
-- * Copyright (C) 2003 Ralf Baechle
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-  */
- #ifndef _ASM_HAZARDS_H
- #define _ASM_HAZARDS_H
-@@ -12,38 +12,200 @@
- 
- #ifdef __ASSEMBLY__
- 
-+	.macro	_ssnop
-+	sll	$0, $0, 1
-+	.endm
-+
- /*
-  * RM9000 hazards.  When the JTLB is updated by tlbwi or tlbwr, a subsequent
-  * use of the JTLB for instructions should not occur for 4 cpu cycles and use
-  * for data translations should not occur for 3 cpu cycles.
-  */
- #ifdef CONFIG_CPU_RM9000
--#define rm9000_tlb_hazard						\
-+
-+#define mtc0_tlbw_hazard						\
- 	.set	push;							\
- 	.set	mips32;							\
--	ssnop; ssnop; ssnop; ssnop;					\
-+	_ssnop; _ssnop; _ssnop; _ssnop;					\
- 	.set	pop
-+
-+#define tlbw_eret_hazard						\
-+	.set	push;							\
-+	.set	mips32;							\
-+	_ssnop; _ssnop; _ssnop; _ssnop;					\
-+	.set	pop
-+
- #else
--#define rm9000_tlb_hazard
-+
-+/*
-+ * The taken branch will result in a two cycle penalty for the two killed
-+ * instructions on R4000 / R4400.  Other processors only have a single cycle
-+ * hazard so this is nice trick to have an optimal code for a range of
-+ * processors.
-+ */
-+#define mtc0_tlbw_hazard						\
-+	b	. + 8
-+#define tlbw_eret_hazard						\
-+	nop
- #endif
- 
-+/*
-+ * mtc0->mfc0 hazard
-+ * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
-+ * It is a MIPS32R2 processor so ehb will clear the hazard.
-+ */
-+
-+#ifdef CONFIG_CPU_MIPSR2
-+/*
-+ * Use a macro for ehb unless explicit support for MIPSR2 is enabled
-+ */
-+	.macro	ehb
-+	sll	$0, $0, 3
-+	.endm
-+
-+#define irq_enable_hazard						\
-+	ehb		# irq_enable_hazard
-+
-+#define irq_disable_hazard						\
-+	ehb		# irq_disable_hazard
-+
-+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
-+
-+/*
-+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
-+ */
-+
-+#define irq_enable_hazard
-+
-+#define irq_disable_hazard
-+
- #else
- 
- /*
-+ * Classic MIPS needs 1 - 3 nops or ssnops
-+ */
-+#define irq_enable_hazard
-+#define irq_disable_hazard						\
-+	_ssnop; _ssnop; _ssnop
-+
-+#endif
-+
-+#else /* __ASSEMBLY__ */
-+
-+/*
-  * RM9000 hazards.  When the JTLB is updated by tlbwi or tlbwr, a subsequent
-  * use of the JTLB for instructions should not occur for 4 cpu cycles and use
-  * for data translations should not occur for 3 cpu cycles.
-  */
- #ifdef CONFIG_CPU_RM9000
--#define rm9000_tlb_hazard()						\
-+
-+#define mtc0_tlbw_hazard()						\
- 	__asm__ __volatile__(						\
- 		".set\tmips32\n\t"					\
--		"ssnop; ssnop; ssnop; ssnop\n\t"			\
-+		"_ssnop; _ssnop; _ssnop; _ssnop\n\t"			\
-+		".set\tmips0")
-+
-+#define tlbw_use_hazard()						\
-+	__asm__ __volatile__(						\
-+		".set\tmips32\n\t"					\
-+		"_ssnop; _ssnop; _ssnop; _ssnop\n\t"			\
- 		".set\tmips0")
- #else
--#define rm9000_tlb_hazard() do { } while (0)
-+
-+/*
-+ * Overkill warning ...
-+ */
-+#define mtc0_tlbw_hazard()						\
-+	__asm__ __volatile__(						\
-+		".set noreorder\n\t"					\
-+		"nop; nop; nop; nop; nop; nop;\n\t"			\
-+		".set reorder\n\t")
-+
-+#define tlbw_use_hazard()						\
-+	__asm__ __volatile__(						\
-+		".set noreorder\n\t"					\
-+		"nop; nop; nop; nop; nop; nop;\n\t"			\
-+		".set reorder\n\t")
-+
- #endif
- 
-+/*
-+ * mtc0->mfc0 hazard
-+ * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
-+ * It is a MIPS32R2 processor so ehb will clear the hazard.
-+ */
-+
-+#ifdef CONFIG_CPU_MIPSR2
-+/*
-+ * Use a macro for ehb unless explicit support for MIPSR2 is enabled
-+ */
-+__asm__(
-+	"	.macro	ehb					\n\t"
-+	"	sll	$0, $0, 3				\n\t"
-+	"	.endm						\n\t"
-+	"							\n\t"
-+	"	.macro\tirq_enable_hazard			\n\t"
-+	"	ehb						\n\t"
-+	"	.endm						\n\t"
-+	"							\n\t"
-+	"	.macro\tirq_disable_hazard			\n\t"
-+	"	ehb						\n\t"
-+	"	.endm");
-+
-+#define irq_enable_hazard()						\
-+	__asm__ __volatile__(						\
-+	"ehb\t\t\t\t# irq_enable_hazard")
-+
-+#define irq_disable_hazard()						\
-+	__asm__ __volatile__(						\
-+	"ehb\t\t\t\t# irq_disable_hazard")
-+
-+#elif defined(CONFIG_CPU_R10000)
-+
-+/*
-+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
-+ */
-+
-+__asm__(
-+	"	.macro\tirq_enable_hazard			\n\t"
-+	"	.endm						\n\t"
-+	"							\n\t"
-+	"	.macro\tirq_disable_hazard			\n\t"
-+	"	.endm");
-+
-+#define irq_enable_hazard()	do { } while (0)
-+#define irq_disable_hazard()	do { } while (0)
-+
-+#else
-+
-+/*
-+ * Default for classic MIPS processors.  Assume worst case hazards but don't
-+ * care about the irq_enable_hazard - sooner or later the hardware will
-+ * enable it and we don't care when exactly.
-+ */
-+
-+__asm__(
-+	"	.macro	_ssnop					\n\t"
-+	"	sll	$0, $2, 1				\n\t"
-+	"	.endm						\n\t"
-+	"							\n\t"
-+	"	#						\n\t"
-+	"	# There is a hazard but we do not care		\n\t"
-+	"	#						\n\t"
-+	"	.macro\tirq_enable_hazard			\n\t"
-+	"	.endm						\n\t"
-+	"							\n\t"
-+	"	.macro\tirq_disable_hazard			\n\t"
-+	"	_ssnop; _ssnop; _ssnop				\n\t"
-+	"	.endm");
-+
-+#define irq_enable_hazard()	do { } while (0)
-+#define irq_disable_hazard()						\
-+	__asm__ __volatile__(						\
-+	"_ssnop; _ssnop; _ssnop;\t\t# irq_disable_hazard")
-+
- #endif
- 
-+#endif /* __ASSEMBLY__ */
-+
- #endif /* _ASM_HAZARDS_H */
-diff -Nur linux-2.4.32-rc1/include/asm-mips/ide.h linux-2.4.32-rc1.mips/include/asm-mips/ide.h
---- linux-2.4.32-rc1/include/asm-mips/ide.h	2003-08-25 13:44:43.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/asm-mips/ide.h	2005-04-19 14:26:53.000000000 +0200
-@@ -32,12 +32,12 @@
- 
- extern struct ide_ops *ide_ops;
- 
--static __inline__ int ide_default_irq(ide_ioreg_t base)
-+static inline int ide_default_irq(ide_ioreg_t base)
- {
- 	return ide_ops->ide_default_irq(base);
- }
- 
--static __inline__ ide_ioreg_t ide_default_io_base(int index)
-+static inline ide_ioreg_t ide_default_io_base(int index)
- {
- 	return ide_ops->ide_default_io_base(index);
- }
-@@ -48,7 +48,7 @@
- 	ide_ops->ide_init_hwif_ports(hw, data_port, ctrl_port, irq);
- }
- 
--static __inline__ void ide_init_default_hwifs(void)
-+static inline void ide_init_default_hwifs(void)
- {
- #ifndef CONFIG_BLK_DEV_IDEPCI
- 	hw_regs_t hw;
-@@ -68,7 +68,89 @@
- #define ide_ack_intr(hwif)	((hwif)->hw.ack_intr ? (hwif)->hw.ack_intr(hwif) : 1)
- #endif
- 
--#include <asm-generic/ide_iops.h>
-+/* MIPS port and memory-mapped I/O string operations.  */
-+
-+static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
-+{
-+	if (cpu_has_dc_aliases) {
-+		unsigned long end = addr + size;
-+		for (; addr < end; addr += PAGE_SIZE)
-+			flush_dcache_page(virt_to_page(addr));
-+	}
-+}
-+
-+static inline void __ide_insw(unsigned long port, void *addr,
-+	unsigned int count)
-+{
-+	insw(port, addr, count);
-+	__ide_flush_dcache_range((unsigned long)addr, count * 2);
-+}
-+
-+static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
-+{
-+	insl(port, addr, count);
-+	__ide_flush_dcache_range((unsigned long)addr, count * 4);
-+}
-+
-+static inline void __ide_outsw(unsigned long port, const void *addr,
-+	unsigned long count)
-+{
-+	outsw(port, addr, count);
-+	__ide_flush_dcache_range((unsigned long)addr, count * 2);
-+}
-+
-+static inline void __ide_outsl(unsigned long port, const void *addr,
-+	unsigned long count)
-+{
-+	outsl(port, addr, count);
-+	__ide_flush_dcache_range((unsigned long)addr, count * 4);
-+}
-+
-+static inline void __ide_mm_insw(unsigned long port, void *addr, u32 count)
-+{
-+	unsigned long start = (unsigned long) addr;
-+
-+	while (count--) {
-+		*(u16 *)addr = readw(port);
-+		addr += 2;
-+	}
-+	__ide_flush_dcache_range(start, count * 2);
-+}
-+
-+static inline void __ide_mm_insl(unsigned long port, void *addr, u32 count)
-+{
-+	unsigned long start = (unsigned long) addr;
-+
-+	while (count--) {
-+		*(u32 *)addr = readl(port);
-+		addr += 4;
-+	}
-+	__ide_flush_dcache_range(start, count * 4);
-+}
-+
-+static inline void __ide_mm_outsw(unsigned long port, const void *addr,
-+	u32 count)
-+{
-+	unsigned long start = (unsigned long) addr;
-+
-+	while (count--) {
-+		writew(*(u16 *)addr, port);
-+		addr += 2;
-+	}
-+	__ide_flush_dcache_range(start, count * 2);
-+}
-+
-+static inline void __ide_mm_outsl(unsigned long port, const void *addr,
-+	u32 count)
-+{
-+	unsigned long start = (unsigned long) addr;
-+
-+	while (count--) {
-+		writel(*(u32 *)addr, port);
-+		addr += 4;
-+	}
-+	__ide_flush_dcache_range(start, count * 4);
-+}
- 
- #endif /* __KERNEL__ */
- 
-diff -Nur linux-2.4.32-rc1/include/asm-mips/io.h linux-2.4.32-rc1.mips/include/asm-mips/io.h
---- linux-2.4.32-rc1/include/asm-mips/io.h	2003-08-25 13:44:43.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/asm-mips/io.h	2005-04-19 14:24:16.000000000 +0200
-@@ -392,7 +392,8 @@
- 	return __ioswab32(__val);
- }
- 
--static inline void __outsb(unsigned long port, void *addr, unsigned int count)
-+static inline void __outsb(unsigned long port, const void *addr,
-+	unsigned int count)
- {
- 	while (count--) {
- 		outb(*(u8 *)addr, port);
-@@ -408,7 +409,8 @@
- 	}
- }
- 
--static inline void __outsw(unsigned long port, void *addr, unsigned int count)
-+static inline void __outsw(unsigned long port, const void *addr,
-+	unsigned int count)
- {
- 	while (count--) {
- 		outw(*(u16 *)addr, port);
-@@ -424,7 +426,8 @@
- 	}
- }
- 
--static inline void __outsl(unsigned long port, void *addr, unsigned int count)
-+static inline void __outsl(unsigned long port, const void *addr,
-+	unsigned int count)
- {
- 	while (count--) {
- 		outl(*(u32 *)addr, port);
-diff -Nur linux-2.4.32-rc1/include/asm-mips/mipsregs.h linux-2.4.32-rc1.mips/include/asm-mips/mipsregs.h
---- linux-2.4.32-rc1/include/asm-mips/mipsregs.h	2005-01-19 15:10:12.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/mipsregs.h	2005-02-06 22:24:22.000000000 +0100
-@@ -757,10 +757,18 @@
- #define read_c0_config1()	__read_32bit_c0_register($16, 1)
- #define read_c0_config2()	__read_32bit_c0_register($16, 2)
- #define read_c0_config3()	__read_32bit_c0_register($16, 3)
-+#define read_c0_config4()	__read_32bit_c0_register($16, 4)
-+#define read_c0_config5()	__read_32bit_c0_register($16, 5)
-+#define read_c0_config6()	__read_32bit_c0_register($16, 6)
-+#define read_c0_config7()	__read_32bit_c0_register($16, 7)
- #define write_c0_config(val)	__write_32bit_c0_register($16, 0, val)
- #define write_c0_config1(val)	__write_32bit_c0_register($16, 1, val)
- #define write_c0_config2(val)	__write_32bit_c0_register($16, 2, val)
- #define write_c0_config3(val)	__write_32bit_c0_register($16, 3, val)
-+#define write_c0_config4(val)	__write_32bit_c0_register($16, 4, val)
-+#define write_c0_config5(val)	__write_32bit_c0_register($16, 5, val)
-+#define write_c0_config6(val)	__write_32bit_c0_register($16, 6, val)
-+#define write_c0_config7(val)	__write_32bit_c0_register($16, 7, val)
- 
- /*
-  * The WatchLo register.  There may be upto 8 of them.
-@@ -874,42 +882,34 @@
-  */
- static inline void tlb_probe(void)
- {
--	rm9000_tlb_hazard();
- 	__asm__ __volatile__(
- 		".set noreorder\n\t"
- 		"tlbp\n\t"
- 		".set reorder");
--	rm9000_tlb_hazard();
- }
- 
- static inline void tlb_read(void)
- {
--	rm9000_tlb_hazard();
- 	__asm__ __volatile__(
- 		".set noreorder\n\t"
- 		"tlbr\n\t"
- 		".set reorder");
--	rm9000_tlb_hazard();
- }
- 
- static inline void tlb_write_indexed(void)
- {
--	rm9000_tlb_hazard();
- 	__asm__ __volatile__(
- 		".set noreorder\n\t"
- 		"tlbwi\n\t"
- 		".set reorder");
--	rm9000_tlb_hazard();
- }
- 
- static inline void tlb_write_random(void)
- {
--	rm9000_tlb_hazard();
- 	__asm__ __volatile__(
- 		".set noreorder\n\t"
- 		"tlbwr\n\t"
- 		".set reorder");
--	rm9000_tlb_hazard();
- }
- 
- /*
-diff -Nur linux-2.4.32-rc1/include/asm-mips/mmu_context.h linux-2.4.32-rc1.mips/include/asm-mips/mmu_context.h
---- linux-2.4.32-rc1/include/asm-mips/mmu_context.h	2005-01-19 15:10:12.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/mmu_context.h	2004-11-22 14:38:29.000000000 +0100
-@@ -27,7 +27,7 @@
- #define TLBMISS_HANDLER_SETUP_PGD(pgd) \
- 	pgd_current[smp_processor_id()] = (unsigned long)(pgd)
- #define TLBMISS_HANDLER_SETUP() \
--	write_c0_context((unsigned long) smp_processor_id() << (23 + 3)); \
-+	write_c0_context((unsigned long) smp_processor_id() << 23); \
- 	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
- extern unsigned long pgd_current[];
- 
-diff -Nur linux-2.4.32-rc1/include/asm-mips/pb1100.h linux-2.4.32-rc1.mips/include/asm-mips/pb1100.h
---- linux-2.4.32-rc1/include/asm-mips/pb1100.h	2003-08-25 13:44:44.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/asm-mips/pb1100.h	2005-01-30 09:10:29.000000000 +0100
-@@ -1,5 +1,5 @@
- /*
-- * Alchemy Semi PB1100 Referrence Board
-+ * AMD Alchemy PB1100 Reference Boards
-  *
-  * Copyright 2001 MontaVista Software Inc.
-  * Author: MontaVista Software, Inc.
-@@ -27,55 +27,108 @@
- #ifndef __ASM_PB1100_H
- #define __ASM_PB1100_H
- 
--#define PB1100_IDENT          0xAE000000
--#define BOARD_STATUS_REG      0xAE000004
--  #define PB1100_ROM_SEL         (1<<15)
--  #define PB1100_ROM_SIZ         (1<<14)
--  #define PB1100_SWAP_BOOT       (1<<13)
--  #define PB1100_FLASH_WP        (1<<12)
--  #define PB1100_ROM_H_STS       (1<<11)
--  #define PB1100_ROM_L_STS       (1<<10)
--  #define PB1100_FLASH_H_STS      (1<<9)
--  #define PB1100_FLASH_L_STS      (1<<8)
--  #define PB1100_SRAM_SIZ         (1<<7)
--  #define PB1100_TSC_BUSY         (1<<6)
--  #define PB1100_PCMCIA_VS_MASK   (3<<4)
--  #define PB1100_RS232_CD         (1<<3)
--  #define PB1100_RS232_CTS        (1<<2)
--  #define PB1100_RS232_DSR        (1<<1)
--  #define PB1100_RS232_RI         (1<<0)
--
--#define PB1100_IRDA_RS232     0xAE00000C
--  #define PB1100_IRDA_FULL       (0<<14) /* full power */
--  #define PB1100_IRDA_SHUTDOWN   (1<<14)
--  #define PB1100_IRDA_TT         (2<<14) /* 2/3 power */
--  #define PB1100_IRDA_OT         (3<<14) /* 1/3 power */
--  #define PB1100_IRDA_FIR        (1<<13)
--
--#define PCMCIA_BOARD_REG     0xAE000010
--  #define PB1100_SD_WP1_RO       (1<<15) /* read only */
--  #define PB1100_SD_WP0_RO       (1<<14) /* read only */
--  #define PB1100_SD_PWR1         (1<<11) /* applies power to SD1 */
--  #define PB1100_SD_PWR0         (1<<10) /* applies power to SD0 */
--  #define PB1100_SEL_SD_CONN1     (1<<9)
--  #define PB1100_SEL_SD_CONN0     (1<<8)
--  #define PC_DEASSERT_RST         (1<<7)
--  #define PC_DRV_EN               (1<<4)
--
--#define PB1100_G_CONTROL      0xAE000014 /* graphics control */
--
--#define PB1100_RST_VDDI       0xAE00001C
--  #define PB1100_SOFT_RESET      (1<<15) /* clear to reset the board */
--  #define PB1100_VDDI_MASK        (0x1F)
-+#define BCSR_KSEG1_ADDR 0xAE000000
-+
-+/*
-+ * Overlay data structure of the Pb1100 board registers.
-+ * Registers located at physical 0E0000xx, KSEG1 0xAE0000xx
-+ */
-+typedef volatile struct
-+{
-+	/*00*/	unsigned short whoami;
-+			unsigned short reserved0;
-+	/*04*/	unsigned short status;
-+			unsigned short reserved1;
-+	/*08*/	unsigned short switches;
-+			unsigned short reserved2;
-+	/*0C*/	unsigned short resets;
-+			unsigned short reserved3;
-+	/*10*/	unsigned short pcmcia;
-+			unsigned short reserved4;
-+	/*14*/	unsigned short graphics; 
-+			unsigned short reserved5;
-+	/*18*/	unsigned short leds;
-+			unsigned short reserved6;
-+	/*1C*/	unsigned short swreset;
-+			unsigned short reserved7;
-+
-+} BCSR;
- 
--#define PB1100_LEDS           0xAE000018
- 
--/* 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
-- * 7:0 is the LED Display's decimal points.
-+/*
-+ * Register/mask bit definitions for the BCSRs
-  */
--#define PB1100_HEX_LED        0xAE000018
-+#define BCSR_WHOAMI_DCID		0x000F	
-+#define BCSR_WHOAMI_CPLD		0x00F0
-+#define BCSR_WHOAMI_BOARD		0x0F00 
-+
-+#define BCSR_STATUS_RS232_RI	    	0x0001 
-+#define BCSR_STATUS_RS232_DSR	 	0x0002 
-+#define BCSR_STATUS_RS232_CTS    	0x0004	
-+#define BCSR_STATUS_RS232_CD	   	0x0008	 
-+#define BCSR_STATUS_PCMCIA_VS_MASK  	0x0030 
-+#define BCSR_STATUS_TSC_BUSY        	0x0040 
-+#define BCSR_STATUS_SRAM_SIZ		0x0080 
-+#define BCSR_STATUS_FLASH_L_STS 	0x0100 
-+#define BCSR_STATUS_FLASH_H_STS 	0x0200	
-+#define BCSR_STATUS_ROM_H_STS   	0x0400 
-+#define BCSR_STATUS_ROM_L_STS   	0x0800	
-+#define BCSR_STATUS_FLASH_WP	    	0x1000 
-+#define BCSR_STATUS_SWAP_BOOT		0x2000
-+#define BCSR_STATUS_ROM_SIZ    		0x4000 
-+#define BCSR_STATUS_ROM_SEL      	0x8000	
-+
-+#define BCSR_SWITCHES_DIP		0x00FF
-+#define BCSR_SWITCHES_DIP_1		0x0080
-+#define BCSR_SWITCHES_DIP_2		0x0040
-+#define BCSR_SWITCHES_DIP_3		0x0020
-+#define BCSR_SWITCHES_DIP_4		0x0010
-+#define BCSR_SWITCHES_DIP_5		0x0008
-+#define BCSR_SWITCHES_DIP_6		0x0004
-+#define BCSR_SWITCHES_DIP_7		0x0002
-+#define BCSR_SWITCHES_DIP_8		0x0001
-+#define BCSR_SWITCHES_ROTARY    	0x0F00
-+#define BCSR_SWITCHES_SDO_CL     	0x8000
-+
-+#define BCSR_RESETS_PHY0		0x0001
-+#define BCSR_RESETS_PHY1		0x0002
-+#define BCSR_RESETS_DC			0x0004
-+#define BCSR_RESETS_RS232_RTS		0x0100
-+#define BCSR_RESETS_RS232_DTR   	0x0200
-+#define BCSR_RESETS_FIR_SEL		0x2000
-+#define BCSR_RESETS_IRDA_MODE_MASK	0xC000
-+#define BCSR_RESETS_IRDA_MODE_FULL	0x0000
-+#define BCSR_RESETS_IRDA_MODE_OFF	0x4000
-+#define BCSR_RESETS_IRDA_MODE_2_3	0x8000
-+#define BCSR_RESETS_IRDA_MODE_1_3	0xC000
-+
-+#define BCSR_PCMCIA_PC0VPP		0x0003
-+#define BCSR_PCMCIA_PC0VCC		0x000C
-+#define BCSR_PCMCIA_PC0_DR_VEN		0x0010
-+#define BCSR_PCMCIA_PC0RST		0x0080
-+#define BCSR_PCMCIA_SEL_SD_CON0   	0x0100
-+#define BCSR_PCMCIA_SEL_SD_CON1   	0x0200
-+#define BCSR_PCMCIA_SD0_PWR		0x0400
-+#define BCSR_PCMCIA_SD1_PWR		0x0800
-+#define BCSR_PCMCIA_SD0_WP		0x4000
-+#define BCSR_PCMCIA_SD1_WP		0x8000
-+
-+#define PB1100_G_CONTROL		0xAE000014
-+#define BCSR_GRAPHICS_GPX_SMPASS    	0x0010
-+#define BCSR_GRAPHICS_GPX_BIG_ENDIAN	0x0020
-+#define BCSR_GRAPHICS_GPX_RST		0x0040
-+
-+#define BCSR_LEDS_DECIMALS		0x00FF
-+#define BCSR_LEDS_LED0			0x0100
-+#define BCSR_LEDS_LED1			0x0200
-+#define BCSR_LEDS_LED2			0x0400
-+#define BCSR_LEDS_LED3			0x0800
-+
-+#define BCSR_SWRESET_RESET		0x0080
-+#define BCSR_VDDI_VDI			0x001F
- 
--/* PCMCIA PB1100 specific defines */
-+
-+ /* PCMCIA Pb1x00 specific defines */
- #define PCMCIA_MAX_SOCK 0
- #define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
- 
-@@ -83,3 +136,4 @@
- #define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
- 
- #endif /* __ASM_PB1100_H */
-+
-diff -Nur linux-2.4.32-rc1/include/asm-mips/pb1200.h linux-2.4.32-rc1.mips/include/asm-mips/pb1200.h
---- linux-2.4.32-rc1/include/asm-mips/pb1200.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/pb1200.h	2005-01-30 09:01:28.000000000 +0100
-@@ -0,0 +1,244 @@
-+/*
-+ * AMD Alchemy PB1200 Referrence Board
-+ * Board Registers defines.
-+ *
-+ * ########################################################################
-+ *
-+ *  This program is free software; you can distribute it and/or modify it
-+ *  under the terms of the GNU General Public License (Version 2) as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  This program is distributed in the hope it will be useful, but WITHOUT
-+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ *  for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License along
-+ *  with this program; if not, write to the Free Software Foundation, Inc.,
-+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ *
-+ */
-+#ifndef __ASM_PB1200_H
-+#define __ASM_PB1200_H
-+
-+#include <linux/types.h>
-+
-+// This is defined in au1000.h with bogus value
-+#undef AU1X00_EXTERNAL_INT
-+
-+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-+
-+/* SPI and SMB are muxed on the Pb1200 board.
-+   Refer to board documentation.
-+ */
-+#define SPI_PSC_BASE        PSC0_BASE_ADDR
-+#define SMBUS_PSC_BASE      PSC0_BASE_ADDR
-+/* AC97 and I2S are muxed on the Pb1200 board.
-+   Refer to board documentation.
-+ */
-+#define AC97_PSC_BASE       PSC1_BASE_ADDR
-+#define I2S_PSC_BASE		PSC1_BASE_ADDR
-+
-+#define BCSR_KSEG1_ADDR 0xAD800000
-+
-+typedef volatile struct
-+{
-+	/*00*/	u16 whoami;
-+		u16 reserved0;
-+	/*04*/	u16 status;
-+		u16 reserved1;
-+	/*08*/	u16 switches;
-+		u16 reserved2;
-+	/*0C*/	u16 resets;
-+		u16 reserved3;
-+
-+	/*10*/	u16 pcmcia;
-+		u16 reserved4;
-+	/*14*/	u16 board;
-+		u16 reserved5;
-+	/*18*/	u16 disk_leds;
-+		u16 reserved6;
-+	/*1C*/	u16 system;
-+		u16 reserved7;
-+
-+	/*20*/	u16 intclr;
-+		u16 reserved8;
-+	/*24*/	u16 intset;
-+		u16 reserved9;
-+	/*28*/	u16 intclr_mask;
-+		u16 reserved10;
-+	/*2C*/	u16 intset_mask;
-+		u16 reserved11;
-+
-+	/*30*/	u16 sig_status;
-+		u16 reserved12;
-+	/*34*/	u16 int_status;
-+		u16 reserved13;
-+	/*38*/	u16 reserved14;
-+		u16 reserved15;
-+	/*3C*/	u16 reserved16;
-+		u16 reserved17;
-+
-+} BCSR;
-+
-+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+
-+/*
-+ * Register bit definitions for the BCSRs
-+ */
-+#define BCSR_WHOAMI_DCID	0x000F
-+#define BCSR_WHOAMI_CPLD	0x00F0
-+#define BCSR_WHOAMI_BOARD	0x0F00
-+
-+#define BCSR_STATUS_PCMCIA0VS	0x0003
-+#define BCSR_STATUS_PCMCIA1VS	0x000C
-+#define BCSR_STATUS_SWAPBOOT	0x0040
-+#define BCSR_STATUS_FLASHBUSY	0x0100
-+#define BCSR_STATUS_IDECBLID	0x0200
-+#define BCSR_STATUS_SD0WP		0x0400
-+#define BCSR_STATUS_SD1WP		0x0800
-+#define BCSR_STATUS_U0RXD		0x1000
-+#define BCSR_STATUS_U1RXD		0x2000
-+
-+#define BCSR_SWITCHES_OCTAL	0x00FF
-+#define BCSR_SWITCHES_DIP_1	0x0080
-+#define BCSR_SWITCHES_DIP_2	0x0040
-+#define BCSR_SWITCHES_DIP_3	0x0020
-+#define BCSR_SWITCHES_DIP_4	0x0010
-+#define BCSR_SWITCHES_DIP_5	0x0008
-+#define BCSR_SWITCHES_DIP_6	0x0004
-+#define BCSR_SWITCHES_DIP_7	0x0002
-+#define BCSR_SWITCHES_DIP_8	0x0001
-+#define BCSR_SWITCHES_ROTARY	0x0F00
-+
-+#define BCSR_RESETS_ETH		0x0001
-+#define BCSR_RESETS_CAMERA	0x0002
-+#define BCSR_RESETS_DC		0x0004
-+#define BCSR_RESETS_IDE		0x0008
-+/* not resets but in the same register */
-+#define BCSR_RESETS_WSCFSM  0x0800
-+#define BCSR_RESETS_PCS0MUX	0x1000
-+#define BCSR_RESETS_PCS1MUX	0x2000
-+#define BCSR_RESETS_SPISEL	0x4000
-+#define BCSR_RESETS_SD1MUX  0x8000
-+
-+#define BCSR_PCMCIA_PC0VPP	0x0003
-+#define BCSR_PCMCIA_PC0VCC	0x000C
-+#define BCSR_PCMCIA_PC0DRVEN	0x0010
-+#define BCSR_PCMCIA_PC0RST	0x0080
-+#define BCSR_PCMCIA_PC1VPP	0x0300
-+#define BCSR_PCMCIA_PC1VCC	0x0C00
-+#define BCSR_PCMCIA_PC1DRVEN	0x1000
-+#define BCSR_PCMCIA_PC1RST	0x8000
-+
-+#define BCSR_BOARD_LCDVEE	0x0001
-+#define BCSR_BOARD_LCDVDD	0x0002
-+#define BCSR_BOARD_LCDBL	0x0004
-+#define BCSR_BOARD_CAMSNAP	0x0010
-+#define BCSR_BOARD_CAMPWR	0x0020
-+#define BCSR_BOARD_SD0PWR	0x0040
-+#define BCSR_BOARD_SD1PWR	0x0080
-+
-+#define BCSR_LEDS_DECIMALS	0x00FF
-+#define BCSR_LEDS_LED0		0x0100
-+#define BCSR_LEDS_LED1		0x0200
-+#define BCSR_LEDS_LED2		0x0400
-+#define BCSR_LEDS_LED3		0x0800
-+
-+#define BCSR_SYSTEM_VDDI	0x001F
-+#define BCSR_SYSTEM_POWEROFF	0x4000
-+#define BCSR_SYSTEM_RESET	0x8000
-+
-+/* Bit positions for the different interrupt sources */
-+#define BCSR_INT_IDE		0x0001
-+#define BCSR_INT_ETH		0x0002
-+#define BCSR_INT_PC0		0x0004
-+#define BCSR_INT_PC0STSCHG	0x0008
-+#define BCSR_INT_PC1		0x0010
-+#define BCSR_INT_PC1STSCHG	0x0020
-+#define BCSR_INT_DC			0x0040
-+#define BCSR_INT_FLASHBUSY	0x0080
-+#define BCSR_INT_PC0INSERT	0x0100
-+#define BCSR_INT_PC0EJECT	0x0200
-+#define BCSR_INT_PC1INSERT	0x0400
-+#define BCSR_INT_PC1EJECT	0x0800
-+#define BCSR_INT_SD0INSERT	0x1000
-+#define BCSR_INT_SD0EJECT	0x2000
-+#define BCSR_INT_SD1INSERT	0x4000
-+#define BCSR_INT_SD1EJECT	0x8000
-+
-+#define AU1XXX_SMC91111_PHYS_ADDR	(0x0D000300)
-+#define AU1XXX_SMC91111_IRQ			PB1200_ETH_INT
-+
-+#define AU1XXX_ATA_PHYS_ADDR		(0x0C800000)
-+#define AU1XXX_ATA_PHYS_LEN			(0x100)
-+#define AU1XXX_ATA_REG_OFFSET	(5)
-+#define AU1XXX_ATA_INT			PB1200_IDE_INT
-+#define AU1XXX_ATA_DDMA_REQ		DSCR_CMD0_DMA_REQ1;
-+#define AU1XXX_ATA_RQSIZE		128
-+
-+#define NAND_PHYS_ADDR   0x1C000000
-+
-+/* Timing values as described in databook, * ns value stripped of
-+ * lower 2 bits.
-+ * These defines are here rather than an SOC1200 generic file because
-+ * the parts chosen on another board may be different and may require
-+ * different timings.
-+ */
-+#define NAND_T_H			(18 >> 2)
-+#define NAND_T_PUL			(30 >> 2)
-+#define NAND_T_SU			(30 >> 2)
-+#define NAND_T_WH			(30 >> 2)
-+
-+/* Bitfield shift amounts */
-+#define NAND_T_H_SHIFT		0
-+#define NAND_T_PUL_SHIFT	4
-+#define NAND_T_SU_SHIFT		8
-+#define NAND_T_WH_SHIFT		12
-+
-+#define NAND_TIMING	((NAND_T_H   & 0xF)	<< NAND_T_H_SHIFT)   | \
-+			((NAND_T_PUL & 0xF)	<< NAND_T_PUL_SHIFT) | \
-+			((NAND_T_SU  & 0xF)	<< NAND_T_SU_SHIFT)  | \
-+			((NAND_T_WH  & 0xF)	<< NAND_T_WH_SHIFT)
-+
-+
-+/*
-+ *	External Interrupts for Pb1200 as of 8/6/2004.
-+ *   Bit positions in the CPLD registers can be calculated by taking
-+ *   the interrupt define and subtracting the PB1200_INT_BEGIN value.
-+ *    *example: IDE bis pos is  = 64 - 64
-+                ETH bit pos is  = 65 - 64
-+ */
-+#define PB1200_INT_BEGIN		(AU1000_LAST_INTC1_INT + 1)
-+#define PB1200_IDE_INT			(PB1200_INT_BEGIN + 0)
-+#define PB1200_ETH_INT			(PB1200_INT_BEGIN + 1)
-+#define PB1200_PC0_INT			(PB1200_INT_BEGIN + 2)
-+#define PB1200_PC0_STSCHG_INT	(PB1200_INT_BEGIN + 3)
-+#define PB1200_PC1_INT			(PB1200_INT_BEGIN + 4)
-+#define PB1200_PC1_STSCHG_INT	(PB1200_INT_BEGIN + 5)
-+#define PB1200_DC_INT			(PB1200_INT_BEGIN + 6)
-+#define PB1200_FLASHBUSY_INT	(PB1200_INT_BEGIN + 7)
-+#define PB1200_PC0_INSERT_INT	(PB1200_INT_BEGIN + 8)
-+#define PB1200_PC0_EJECT_INT	(PB1200_INT_BEGIN + 9)
-+#define PB1200_PC1_INSERT_INT	(PB1200_INT_BEGIN + 10)
-+#define PB1200_PC1_EJECT_INT	(PB1200_INT_BEGIN + 11)
-+#define PB1200_SD0_INSERT_INT	(PB1200_INT_BEGIN + 12)
-+#define PB1200_SD0_EJECT_INT	(PB1200_INT_BEGIN + 13)
-+#define PB1200_SD1_INSERT_INT	(PB1200_INT_BEGIN + 14)
-+#define PB1200_SD1_EJECT_INT	(PB1200_INT_BEGIN + 15)
-+
-+#define PB1200_INT_END			(PB1200_INT_BEGIN + 15)
-+
-+/* For drivers/pcmcia/au1000_db1x00.c */
-+#define BOARD_PC0_INT PB1200_PC0_INT
-+#define BOARD_PC1_INT PB1200_PC1_INT
-+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
-+
-+#endif /* __ASM_PB1200_H */
-+
-diff -Nur linux-2.4.32-rc1/include/asm-mips/pb1550.h linux-2.4.32-rc1.mips/include/asm-mips/pb1550.h
---- linux-2.4.32-rc1/include/asm-mips/pb1550.h	2005-01-19 15:10:12.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/pb1550.h	2005-01-30 09:01:28.000000000 +0100
-@@ -30,13 +30,11 @@
- 
- #define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
- #define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
--#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
--#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
--
- #define SPI_PSC_BASE        PSC0_BASE_ADDR
- #define AC97_PSC_BASE       PSC1_BASE_ADDR
- #define SMBUS_PSC_BASE      PSC2_BASE_ADDR
- #define I2S_PSC_BASE        PSC3_BASE_ADDR
-+#define NAND_CS 1
- 
- #define BCSR_PHYS_ADDR 0xAF000000
- 
-@@ -160,9 +158,23 @@
- #define NAND_T_SU_SHIFT		8
- #define NAND_T_WH_SHIFT		12
- 
--#define NAND_TIMING	((NAND_T_H   & 0xF)	<< NAND_T_H_SHIFT)   | \
--			((NAND_T_PUL & 0xF)	<< NAND_T_PUL_SHIFT) | \
--			((NAND_T_SU  & 0xF)	<< NAND_T_SU_SHIFT)  | \
--			((NAND_T_WH  & 0xF)	<< NAND_T_WH_SHIFT)
-+#define NAND_TIMING	((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
-+			((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
-+			((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
-+			((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT)
-+
-+/*
-+ * Daughter card information.
-+ */
-+#define DAUGHTER_CARD_BASE		(0xAC000000)
-+#define DAUGHTER_CARD_MEM_SIZE		(0xADFFFFFF - DAUGHTER_CARD_BASE + 1)
-+#define DAUGHTER_CARD_IRQ		(AU1000_GPIO_3)
-+
-+/* DC_IDE and DC_ETHERNET */
-+#define AU1XXX_ATA_PHYS_ADDR		(0x0C000000)
-+#define AU1XXX_ATA_REG_OFFSET		(5)	
-+
-+#define AU1XXX_SMC91111_PHYS_ADDR	(0x0C000300)
-+#define AU1XXX_SMC91111_IRQ		AU1000_GPIO_3
- 
- #endif /* __ASM_PB1550_H */
-diff -Nur linux-2.4.32-rc1/include/asm-mips/reg.h linux-2.4.32-rc1.mips/include/asm-mips/reg.h
---- linux-2.4.32-rc1/include/asm-mips/reg.h	2002-08-03 02:39:45.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/asm-mips/reg.h	2005-04-14 12:41:44.000000000 +0200
-@@ -45,6 +45,9 @@
- /*
-  * k0/k1 unsaved
-  */
-+#define EF_REG26		32
-+#define EF_REG27		33
-+
- #define EF_REG28		34
- #define EF_REG29		35
- #define EF_REG30		36
-@@ -60,6 +63,7 @@
- #define EF_CP0_BADVADDR		41
- #define EF_CP0_STATUS		42
- #define EF_CP0_CAUSE		43
-+#define EF_UNUSED0		44
- 
- #define EF_SIZE			180	/* size in bytes */
- 
-diff -Nur linux-2.4.32-rc1/include/asm-mips/sgi/hpc3.h linux-2.4.32-rc1.mips/include/asm-mips/sgi/hpc3.h
---- linux-2.4.32-rc1/include/asm-mips/sgi/hpc3.h	2003-08-25 13:44:44.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/asm-mips/sgi/hpc3.h	2005-09-23 16:35:27.000000000 +0200
-@@ -128,26 +128,26 @@
- 	volatile u32 rx_gfptr;	/* current GIO fifo ptr */
- 	volatile u32 rx_dfptr;	/* current device fifo ptr */
- 	u32 _unused1;		/* padding */
--	volatile u32 rx_reset;	/* reset register */
--#define HPC3_ERXRST_CRESET 0x1	/* Reset dma channel and external controller */
--#define HPC3_ERXRST_CLRIRQ 0x2	/* Clear channel interrupt */
--#define HPC3_ERXRST_LBACK  0x4	/* Enable diagnostic loopback mode of Seeq8003 */
--
--	volatile u32 rx_dconfig;	/* DMA configuration register */
--#define HPC3_ERXDCFG_D1    0x0000f /* Cycles to spend in D1 state for PIO */
--#define HPC3_ERXDCFG_D2    0x000f0 /* Cycles to spend in D2 state for PIO */
--#define HPC3_ERXDCFG_D3    0x00f00 /* Cycles to spend in D3 state for PIO */
--#define HPC3_ERXDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
--#define HPC3_ERXDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
--#define HPC3_ERXDCFG_FEOP  0x04000 /* Bad packet marker timeout enable */
--#define HPC3_ERXDCFG_FIRQ  0x08000 /* Another bad packet timeout enable */
--#define HPC3_ERXDCFG_PTO   0x30000 /* Programmed timeout value for above two */
--
--	volatile u32 rx_pconfig;	/* PIO configuration register */
--#define HPC3_ERXPCFG_P1    0x000f /* Cycles to spend in P1 state for PIO */
--#define HPC3_ERXPCFG_P2    0x00f0 /* Cycles to spend in P2 state for PIO */
--#define HPC3_ERXPCFG_P3    0x0f00 /* Cycles to spend in P3 state for PIO */
--#define HPC3_ERXPCFG_TST   0x1000 /* Diagnistic ram test feature bit */
-+	volatile u32 reset;	/* reset register */
-+#define HPC3_ERST_CRESET 0x1	/* Reset dma channel and external controller */
-+#define HPC3_ERST_CLRIRQ 0x2	/* Clear channel interrupt */
-+#define HPC3_ERST_LBACK  0x4	/* Enable diagnostic loopback mode of Seeq8003 */
-+
-+	volatile u32 dconfig;    /* DMA configuration register */
-+#define HPC3_EDCFG_D1    0x0000f /* Cycles to spend in D1 state for PIO */
-+#define HPC3_EDCFG_D2    0x000f0 /* Cycles to spend in D2 state for PIO */
-+#define HPC3_EDCFG_D3    0x00f00 /* Cycles to spend in D3 state for PIO */
-+#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
-+#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
-+#define HPC3_EDCFG_FEOP  0x04000 /* Bad packet marker timeout enable */
-+#define HPC3_EDCFG_FIRQ  0x08000 /* Another bad packet timeout enable */
-+#define HPC3_EDCFG_PTO   0x30000 /* Programmed timeout value for above two */
-+
-+	volatile u32 pconfig;   /* PIO configuration register */
-+#define HPC3_EPCFG_P1    0x000f /* Cycles to spend in P1 state for PIO */
-+#define HPC3_EPCFG_P2    0x00f0 /* Cycles to spend in P2 state for PIO */
-+#define HPC3_EPCFG_P3    0x0f00 /* Cycles to spend in P3 state for PIO */
-+#define HPC3_EPCFG_TST   0x1000 /* Diagnistic ram test feature bit */
- 
- 	u32 _unused2[0x1000/4 - 8];	/* padding */
- 
-@@ -221,7 +221,7 @@
- #define HPC3_BESTAT_PIDMASK	0x3f700	/* DMA channel parity identifier */
- 
- 	u32 _unused1[0x14000/4 - 5];	/* padding */
--	
-+
- 	/* Now direct PIO per-HPC3 peripheral access to external regs. */
- 	volatile u32 scsi0_ext[256];	/* SCSI channel 0 external regs */
- 	u32 _unused2[0x7c00/4];
-@@ -304,7 +304,7 @@
- 	volatile u32 bbram[8192-50-14];	/* Battery backed ram */
- };
- 
--/* 
-+/*
-  * It is possible to have two HPC3's within the address space on
-  * one machine, though only having one is more likely on an Indy.
-  */
-diff -Nur linux-2.4.32-rc1/include/asm-mips/tx4927/tx4927.h linux-2.4.32-rc1.mips/include/asm-mips/tx4927/tx4927.h
---- linux-2.4.32-rc1/include/asm-mips/tx4927/tx4927.h	2003-08-25 13:44:44.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/asm-mips/tx4927/tx4927.h	2004-11-22 19:02:10.000000000 +0100
-@@ -88,8 +88,8 @@
- 
- 
- /* TX4927 Configuration registers (64-bit registers) */
--#define TX4927_CONFIG_BASE                       0xe300
--#define TX4927_CONFIG_CCFG                       0xe300
-+#define TX4927_CONFIG_BASE                       0xe000
-+#define TX4927_CONFIG_CCFG                       0xe000
- #define TX4927_CONFIG_CCFG_RESERVED_42_63                BM_63_42
- #define TX4927_CONFIG_CCFG_WDRST                         BM_41_41
- #define TX4927_CONFIG_CCFG_WDREXEN                       BM_40_40
-@@ -124,14 +124,14 @@
- #define TX4927_CONFIG_CCFG_ENDIAN                        BM_02_02
- #define TX4927_CONFIG_CCFG_ARMODE                        BM_01_01
- #define TX4927_CONFIG_CCFG_ACEHOLD                       BM_00_00
--#define TX4927_CONFIG_REVID                      0xe308 
-+#define TX4927_CONFIG_REVID                      0xe008 
- #define TX4927_CONFIG_REVID_RESERVED_32_63               BM_32_63
- #define TX4927_CONFIG_REVID_PCODE                        BM_16_31
- #define TX4927_CONFIG_REVID_MJERREV                      BM_12_15
- #define TX4927_CONFIG_REVID_MINEREV                      BM_08_11
- #define TX4927_CONFIG_REVID_MJREV                        BM_04_07
- #define TX4927_CONFIG_REVID_MINREV                       BM_00_03
--#define TX4927_CONFIG_PCFG                       0xe310 
-+#define TX4927_CONFIG_PCFG                       0xe010 
- #define TX4927_CONFIG_PCFG_RESERVED_57_63                BM_57_63
- #define TX4927_CONFIG_PCFG_DRVDATA                       BM_56_56
- #define TX4927_CONFIG_PCFG_DRVCB                         BM_55_55
-@@ -197,10 +197,10 @@
- #define TX4927_CONFIG_PCFG_DMASEL0_SIO1                  BM_00_00
- #define TX4927_CONFIG_PCFG_DMASEL0_ACLC0                 BM_01_01
- #define TX4927_CONFIG_PCFG_DMASEL0_ACLC2                 BM_00_01
--#define TX4927_CONFIG_TOEA                       0xe318 
-+#define TX4927_CONFIG_TOEA                       0xe018 
- #define TX4927_CONFIG_TOEA_RESERVED_36_63                BM_36_63
- #define TX4927_CONFIG_TOEA_TOEA                          BM_00_35
--#define TX4927_CONFIG_CLKCTR                     0xe320 
-+#define TX4927_CONFIG_CLKCTR                     0xe020 
- #define TX4927_CONFIG_CLKCTR_RESERVED_26_63              BM_26_63
- #define TX4927_CONFIG_CLKCTR_ACLCKD                      BM_25_25
- #define TX4927_CONFIG_CLKCTR_PIOCKD                      BM_24_24
-@@ -223,7 +223,7 @@
- #define TX4927_CONFIG_CLKCTR_TM2RST                      BM_02_02
- #define TX4927_CONFIG_CLKCTR_SIO0RST                     BM_01_01
- #define TX4927_CONFIG_CLKCTR_SIO1RST                     BM_00_00
--#define TX4927_CONFIG_GARBC                      0xe330 
-+#define TX4927_CONFIG_GARBC                      0xe030 
- #define TX4927_CONFIG_GARBC_RESERVED_10_63               BM_10_63
- #define TX4927_CONFIG_GARBC_SET_09                       BM_09_09
- #define TX4927_CONFIG_GARBC_ARBMD                        BM_08_08
-@@ -243,7 +243,7 @@
- #define TX4927_CONFIG_GARBC_PRIORITY_H3_PDMAC            BM_00_00
- #define TX4927_CONFIG_GARBC_PRIORITY_H3_DMAC             BM_01_01
- #define TX4927_CONFIG_GARBC_PRIORITY_H3_BAD_VALUE        BM_00_01
--#define TX4927_CONFIG_RAMP                       0xe348 
-+#define TX4927_CONFIG_RAMP                       0xe048 
- #define TX4927_CONFIG_RAMP_RESERVED_20_63                BM_20_63
- #define TX4927_CONFIG_RAMP_RAMP                          BM_00_19
- #define TX4927_CONFIG_LIMIT                      0xefff
-@@ -456,7 +456,7 @@
- #define TX4927_ACLC_ACINTSTS            0xf710
- #define TX4927_ACLC_ACINTMSTS           0xf714
- #define TX4927_ACLC_ACINTEN             0xf718
--#define TX4927_ACLC_ACINTDIS            0xfR71c
-+#define TX4927_ACLC_ACINTDIS            0xf71c
- #define TX4927_ACLC_ACSEMAPH            0xf720
- #define TX4927_ACLC_ACGPIDAT            0xf740
- #define TX4927_ACLC_ACGPODAT            0xf744
-diff -Nur linux-2.4.32-rc1/include/asm-mips/unistd.h linux-2.4.32-rc1.mips/include/asm-mips/unistd.h
---- linux-2.4.32-rc1/include/asm-mips/unistd.h	2005-01-19 15:10:12.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips/unistd.h	2004-11-24 21:30:06.000000000 +0100
-@@ -760,7 +760,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- /*
-@@ -788,7 +788,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #define _syscall2(type,name,atype,a,btype,b) \
-@@ -813,7 +813,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #define _syscall3(type,name,atype,a,btype,b,ctype,c) \
-@@ -839,7 +839,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #define _syscall4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
-@@ -865,7 +865,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #if (_MIPS_SIM == _MIPS_SIM_ABI32)
-@@ -902,7 +902,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #define _syscall6(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e,ftype,f) \
-@@ -935,7 +935,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #endif /* (_MIPS_SIM == _MIPS_SIM_ABI32) */
-@@ -966,7 +966,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #define _syscall6(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e,ftype,f) \
-@@ -995,7 +995,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #endif /* (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) */
-diff -Nur linux-2.4.32-rc1/include/asm-mips64/checksum.h linux-2.4.32-rc1.mips/include/asm-mips64/checksum.h
---- linux-2.4.32-rc1/include/asm-mips64/checksum.h	2005-01-19 15:10:12.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips64/checksum.h	2005-09-20 12:58:50.000000000 +0200
-@@ -144,7 +144,7 @@
- 	"daddu\t%0, %4\n\t"
- 	"dsll32\t$1, %0, 0\n\t"
- 	"daddu\t%0, $1\n\t"
--	"dsrl32\t%0, %0, 0\n\t"
-+	"dsra32\t%0, %0, 0\n\t"
- 	".set\tat"
- 	: "=&r" (sum)
- 	: "0" (daddr), "r"(saddr),
-diff -Nur linux-2.4.32-rc1/include/asm-mips64/elf.h linux-2.4.32-rc1.mips/include/asm-mips64/elf.h
---- linux-2.4.32-rc1/include/asm-mips64/elf.h	2004-02-18 14:36:32.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips64/elf.h	2005-04-14 12:41:44.000000000 +0200
-@@ -64,9 +64,10 @@
- #define USE_ELF_CORE_DUMP
- #define ELF_EXEC_PAGESIZE	PAGE_SIZE
- 
--#define ELF_CORE_COPY_REGS(_dest,_regs)				\
--	memcpy((char *) &_dest, (char *) _regs,			\
--	       sizeof(struct pt_regs));
-+extern void dump_regs(elf_greg_t *, struct pt_regs *regs);
-+
-+#define ELF_CORE_COPY_REGS(elf_regs, regs)			\
-+	dump_regs((elf_greg_t *)&(elf_regs), regs);
- 
- /* This yields a mask that user programs can use to figure out what
-    instruction set this cpu supports.  This could be done in userspace,
-diff -Nur linux-2.4.32-rc1/include/asm-mips64/hazards.h linux-2.4.32-rc1.mips/include/asm-mips64/hazards.h
---- linux-2.4.32-rc1/include/asm-mips64/hazards.h	2004-02-18 14:36:32.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips64/hazards.h	2005-06-06 16:46:22.000000000 +0200
-@@ -3,7 +3,7 @@
-  * License.  See the file "COPYING" in the main directory of this archive
-  * for more details.
-  *
-- * Copyright (C) 2003 Ralf Baechle
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-  */
- #ifndef _ASM_HAZARDS_H
- #define _ASM_HAZARDS_H
-@@ -12,37 +12,200 @@
- 
- #ifdef __ASSEMBLY__
- 
-+	.macro	_ssnop
-+	sll	$0, $0, 1
-+	.endm
-+
- /*
-  * RM9000 hazards.  When the JTLB is updated by tlbwi or tlbwr, a subsequent
-  * use of the JTLB for instructions should not occur for 4 cpu cycles and use
-  * for data translations should not occur for 3 cpu cycles.
-  */
- #ifdef CONFIG_CPU_RM9000
--#define rm9000_tlb_hazard						\
-+
-+#define mtc0_tlbw_hazard						\
-+	.set	push;							\
- 	.set	mips32;							\
--	ssnop; ssnop; ssnop; ssnop;					\
--	.set	mips0
-+	_ssnop; _ssnop; _ssnop; _ssnop;					\
-+	.set	pop
-+
-+#define tlbw_eret_hazard						\
-+	.set	push;							\
-+	.set	mips32;							\
-+	_ssnop; _ssnop; _ssnop; _ssnop;					\
-+	.set	pop
-+
- #else
--#define rm9000_tlb_hazard
-+
-+/*
-+ * The taken branch will result in a two cycle penalty for the two killed
-+ * instructions on R4000 / R4400.  Other processors only have a single cycle
-+ * hazard so this is nice trick to have an optimal code for a range of
-+ * processors.
-+ */
-+#define mtc0_tlbw_hazard						\
-+	b	. + 8
-+#define tlbw_eret_hazard						\
-+	nop
- #endif
- 
-+/*
-+ * mtc0->mfc0 hazard
-+ * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
-+ * It is a MIPS32R2 processor so ehb will clear the hazard.
-+ */
-+
-+#ifdef CONFIG_CPU_MIPSR2
-+/*
-+ * Use a macro for ehb unless explicit support for MIPSR2 is enabled
-+ */
-+	.macro	ehb
-+	sll	$0, $0, 3
-+	.endm
-+
-+#define irq_enable_hazard						\
-+	ehb		# irq_enable_hazard
-+
-+#define irq_disable_hazard						\
-+	ehb		# irq_disable_hazard
-+
-+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
-+
-+/*
-+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
-+ */
-+
-+#define irq_enable_hazard
-+
-+#define irq_disable_hazard
-+
- #else
- 
- /*
-+ * Classic MIPS needs 1 - 3 nops or ssnops
-+ */
-+#define irq_enable_hazard
-+#define irq_disable_hazard						\
-+	_ssnop; _ssnop; _ssnop
-+
-+#endif
-+
-+#else /* __ASSEMBLY__ */
-+
-+/*
-  * RM9000 hazards.  When the JTLB is updated by tlbwi or tlbwr, a subsequent
-  * use of the JTLB for instructions should not occur for 4 cpu cycles and use
-  * for data translations should not occur for 3 cpu cycles.
-  */
- #ifdef CONFIG_CPU_RM9000
--#define rm9000_tlb_hazard()						\
-+
-+#define mtc0_tlbw_hazard()						\
-+	__asm__ __volatile__(						\
-+		".set\tmips32\n\t"					\
-+		"_ssnop; _ssnop; _ssnop; _ssnop\n\t"			\
-+		".set\tmips0")
-+
-+#define tlbw_use_hazard()						\
- 	__asm__ __volatile__(						\
- 		".set\tmips32\n\t"					\
--		"ssnop; ssnop; ssnop; ssnop\n\t"			\
-+		"_ssnop; _ssnop; _ssnop; _ssnop\n\t"			\
- 		".set\tmips0")
- #else
--#define rm9000_tlb_hazard() do { } while (0)
-+
-+/*
-+ * Overkill warning ...
-+ */
-+#define mtc0_tlbw_hazard()						\
-+	__asm__ __volatile__(						\
-+		".set noreorder\n\t"					\
-+		"nop; nop; nop; nop; nop; nop;\n\t"			\
-+		".set reorder\n\t")
-+
-+#define tlbw_use_hazard()						\
-+	__asm__ __volatile__(						\
-+		".set noreorder\n\t"					\
-+		"nop; nop; nop; nop; nop; nop;\n\t"			\
-+		".set reorder\n\t")
-+
- #endif
- 
-+/*
-+ * mtc0->mfc0 hazard
-+ * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
-+ * It is a MIPS32R2 processor so ehb will clear the hazard.
-+ */
-+
-+#ifdef CONFIG_CPU_MIPSR2
-+/*
-+ * Use a macro for ehb unless explicit support for MIPSR2 is enabled
-+ */
-+__asm__(
-+	"	.macro	ehb					\n\t"
-+	"	sll	$0, $0, 3				\n\t"
-+	"	.endm						\n\t"
-+	"							\n\t"
-+	"	.macro\tirq_enable_hazard			\n\t"
-+	"	ehb						\n\t"
-+	"	.endm						\n\t"
-+	"							\n\t"
-+	"	.macro\tirq_disable_hazard			\n\t"
-+	"	ehb						\n\t"
-+	"	.endm");
-+
-+#define irq_enable_hazard()						\
-+	__asm__ __volatile__(						\
-+	"ehb\t\t\t\t# irq_enable_hazard")
-+
-+#define irq_disable_hazard()						\
-+	__asm__ __volatile__(						\
-+	"ehb\t\t\t\t# irq_disable_hazard")
-+
-+#elif defined(CONFIG_CPU_R10000)
-+
-+/*
-+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
-+ */
-+
-+__asm__(
-+	"	.macro\tirq_enable_hazard			\n\t"
-+	"	.endm						\n\t"
-+	"							\n\t"
-+	"	.macro\tirq_disable_hazard			\n\t"
-+	"	.endm");
-+
-+#define irq_enable_hazard()	do { } while (0)
-+#define irq_disable_hazard()	do { } while (0)
-+
-+#else
-+
-+/*
-+ * Default for classic MIPS processors.  Assume worst case hazards but don't
-+ * care about the irq_enable_hazard - sooner or later the hardware will
-+ * enable it and we don't care when exactly.
-+ */
-+
-+__asm__(
-+	"	.macro	_ssnop					\n\t"
-+	"	sll	$0, $2, 1				\n\t"
-+	"	.endm						\n\t"
-+	"							\n\t"
-+	"	#						\n\t"
-+	"	# There is a hazard but we do not care		\n\t"
-+	"	#						\n\t"
-+	"	.macro\tirq_enable_hazard			\n\t"
-+	"	.endm						\n\t"
-+	"							\n\t"
-+	"	.macro\tirq_disable_hazard			\n\t"
-+	"	_ssnop; _ssnop; _ssnop				\n\t"
-+	"	.endm");
-+
-+#define irq_enable_hazard()	do { } while (0)
-+#define irq_disable_hazard()						\
-+	__asm__ __volatile__(						\
-+	"_ssnop; _ssnop; _ssnop;\t\t# irq_disable_hazard")
-+
- #endif
- 
-+#endif /* __ASSEMBLY__ */
-+
- #endif /* _ASM_HAZARDS_H */
-diff -Nur linux-2.4.32-rc1/include/asm-mips64/ide.h linux-2.4.32-rc1.mips/include/asm-mips64/ide.h
---- linux-2.4.32-rc1/include/asm-mips64/ide.h	2003-08-25 13:44:44.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/asm-mips64/ide.h	2005-04-19 14:26:53.000000000 +0200
-@@ -32,12 +32,12 @@
- 
- extern struct ide_ops *ide_ops;
- 
--static __inline__ int ide_default_irq(ide_ioreg_t base)
-+static inline int ide_default_irq(ide_ioreg_t base)
- {
- 	return ide_ops->ide_default_irq(base);
- }
- 
--static __inline__ ide_ioreg_t ide_default_io_base(int index)
-+static inline ide_ioreg_t ide_default_io_base(int index)
- {
- 	return ide_ops->ide_default_io_base(index);
- }
-@@ -48,7 +48,7 @@
- 	ide_ops->ide_init_hwif_ports(hw, data_port, ctrl_port, irq);
- }
- 
--static __inline__ void ide_init_default_hwifs(void)
-+static inline void ide_init_default_hwifs(void)
- {
- #ifndef CONFIG_BLK_DEV_IDEPCI
- 	hw_regs_t hw;
-@@ -68,7 +68,89 @@
- #define ide_ack_intr(hwif)    ((hwif)->hw.ack_intr ? (hwif)->hw.ack_intr(hwif) : 1)
- #endif
- 
--#include <asm-generic/ide_iops.h>
-+/* MIPS port and memory-mapped I/O string operations.  */
-+
-+static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
-+{
-+	if (cpu_has_dc_aliases) {
-+		unsigned long end = addr + size;
-+		for (; addr < end; addr += PAGE_SIZE)
-+			flush_dcache_page(virt_to_page(addr));
-+	}
-+}
-+
-+static inline void __ide_insw(unsigned long port, void *addr,
-+	unsigned int count)
-+{
-+	insw(port, addr, count);
-+	__ide_flush_dcache_range((unsigned long)addr, count * 2);
-+}
-+
-+static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
-+{
-+	insl(port, addr, count);
-+	__ide_flush_dcache_range((unsigned long)addr, count * 4);
-+}
-+
-+static inline void __ide_outsw(unsigned long port, const void *addr,
-+	unsigned long count)
-+{
-+	outsw(port, addr, count);
-+	__ide_flush_dcache_range((unsigned long)addr, count * 2);
-+}
-+
-+static inline void __ide_outsl(unsigned long port, const void *addr,
-+	unsigned long count)
-+{
-+	outsl(port, addr, count);
-+	__ide_flush_dcache_range((unsigned long)addr, count * 4);
-+}
-+
-+static inline void __ide_mm_insw(unsigned long port, void *addr, u32 count)
-+{
-+	unsigned long start = (unsigned long) addr;
-+
-+	while (count--) {
-+		*(u16 *)addr = readw(port);
-+		addr += 2;
-+	}
-+	__ide_flush_dcache_range(start, count * 2);
-+}
-+
-+static inline void __ide_mm_insl(unsigned long port, void *addr, u32 count)
-+{
-+	unsigned long start = (unsigned long) addr;
-+
-+	while (count--) {
-+		*(u32 *)addr = readl(port);
-+		addr += 4;
-+	}
-+	__ide_flush_dcache_range(start, count * 4);
-+}
-+
-+static inline void __ide_mm_outsw(unsigned long port, const void *addr,
-+	u32 count)
-+{
-+	unsigned long start = (unsigned long) addr;
-+
-+	while (count--) {
-+		writew(*(u16 *)addr, port);
-+		addr += 2;
-+	}
-+	__ide_flush_dcache_range(start, count * 2);
-+}
-+
-+static inline void __ide_mm_outsl(unsigned long port, const void *addr,
-+	u32 count)
-+{
-+	unsigned long start = (unsigned long) addr;
-+
-+	while (count--) {
-+		writel(*(u32 *)addr, port);
-+		addr += 4;
-+	}
-+	__ide_flush_dcache_range(start, count * 4);
-+}
- 
- #endif /* __KERNEL__ */
- 
-diff -Nur linux-2.4.32-rc1/include/asm-mips64/io.h linux-2.4.32-rc1.mips/include/asm-mips64/io.h
---- linux-2.4.32-rc1/include/asm-mips64/io.h	2004-02-18 14:36:32.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips64/io.h	2005-04-19 14:24:53.000000000 +0200
-@@ -414,7 +414,8 @@
- 	return __ioswab32(__val);
- }
- 
--static inline void __outsb(unsigned long port, void *addr, unsigned int count)
-+static inline void __outsb(unsigned long port, const void *addr,
-+	unsigned int count)
- {
- 	while (count--) {
- 		outb(*(u8 *)addr, port);
-@@ -430,7 +431,8 @@
- 	}
- }
- 
--static inline void __outsw(unsigned long port, void *addr, unsigned int count)
-+static inline void __outsw(unsigned long port, const void *addr,
-+	unsigned int count)
- {
- 	while (count--) {
- 		outw(*(u16 *)addr, port);
-@@ -446,7 +448,8 @@
- 	}
- }
- 
--static inline void __outsl(unsigned long port, void *addr, unsigned int count)
-+static inline void __outsl(unsigned long port, const void *addr,
-+	unsigned int count)
- {
- 	while (count--) {
- 		outl(*(u32 *)addr, port);
-diff -Nur linux-2.4.32-rc1/include/asm-mips64/mipsregs.h linux-2.4.32-rc1.mips/include/asm-mips64/mipsregs.h
---- linux-2.4.32-rc1/include/asm-mips64/mipsregs.h	2005-01-19 15:10:12.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips64/mipsregs.h	2005-02-06 22:24:22.000000000 +0100
-@@ -757,10 +757,18 @@
- #define read_c0_config1()	__read_32bit_c0_register($16, 1)
- #define read_c0_config2()	__read_32bit_c0_register($16, 2)
- #define read_c0_config3()	__read_32bit_c0_register($16, 3)
-+#define read_c0_config4()	__read_32bit_c0_register($16, 4)
-+#define read_c0_config5()	__read_32bit_c0_register($16, 5)
-+#define read_c0_config6()	__read_32bit_c0_register($16, 6)
-+#define read_c0_config7()	__read_32bit_c0_register($16, 7)
- #define write_c0_config(val)	__write_32bit_c0_register($16, 0, val)
- #define write_c0_config1(val)	__write_32bit_c0_register($16, 1, val)
- #define write_c0_config2(val)	__write_32bit_c0_register($16, 2, val)
- #define write_c0_config3(val)	__write_32bit_c0_register($16, 3, val)
-+#define write_c0_config4(val)	__write_32bit_c0_register($16, 4, val)
-+#define write_c0_config5(val)	__write_32bit_c0_register($16, 5, val)
-+#define write_c0_config6(val)	__write_32bit_c0_register($16, 6, val)
-+#define write_c0_config7(val)	__write_32bit_c0_register($16, 7, val)
- 
- /*
-  * The WatchLo register.  There may be upto 8 of them.
-@@ -856,42 +864,34 @@
-  */
- static inline void tlb_probe(void)
- {
--	rm9000_tlb_hazard();
- 	__asm__ __volatile__(
- 		".set noreorder\n\t"
- 		"tlbp\n\t"
- 		".set reorder");
--	rm9000_tlb_hazard();
- }
- 
- static inline void tlb_read(void)
- {
--	rm9000_tlb_hazard();
- 	__asm__ __volatile__(
- 		".set noreorder\n\t"
- 		"tlbr\n\t"
- 		".set reorder");
--	rm9000_tlb_hazard();
- }
- 
- static inline void tlb_write_indexed(void)
- {
--	rm9000_tlb_hazard();
- 	__asm__ __volatile__(
- 		".set noreorder\n\t"
- 		"tlbwi\n\t"
- 		".set reorder");
--	rm9000_tlb_hazard();
- }
- 
- static inline void tlb_write_random(void)
- {
--	rm9000_tlb_hazard();
- 	__asm__ __volatile__(
- 		".set noreorder\n\t"
- 		"tlbwr\n\t"
- 		".set reorder");
--	rm9000_tlb_hazard();
- }
- 
- /*
-diff -Nur linux-2.4.32-rc1/include/asm-mips64/reg.h linux-2.4.32-rc1.mips/include/asm-mips64/reg.h
---- linux-2.4.32-rc1/include/asm-mips64/reg.h	2003-08-25 13:44:44.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/asm-mips64/reg.h	2005-04-14 12:41:44.000000000 +0200
-@@ -46,6 +46,9 @@
- /*
-  * k0/k1 unsaved
-  */
-+#define EF_REG26		26
-+#define EF_REG27		27
-+
- #define EF_REG28		28
- #define EF_REG29		29
- #define EF_REG30		30
-diff -Nur linux-2.4.32-rc1/include/asm-mips64/sgi/hpc3.h linux-2.4.32-rc1.mips/include/asm-mips64/sgi/hpc3.h
---- linux-2.4.32-rc1/include/asm-mips64/sgi/hpc3.h	2003-08-25 13:44:44.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/asm-mips64/sgi/hpc3.h	2005-09-23 16:35:27.000000000 +0200
-@@ -128,26 +128,26 @@
- 	volatile u32 rx_gfptr;	/* current GIO fifo ptr */
- 	volatile u32 rx_dfptr;	/* current device fifo ptr */
- 	u32 _unused1;		/* padding */
--	volatile u32 rx_reset;	/* reset register */
--#define HPC3_ERXRST_CRESET 0x1	/* Reset dma channel and external controller */
--#define HPC3_ERXRST_CLRIRQ 0x2	/* Clear channel interrupt */
--#define HPC3_ERXRST_LBACK  0x4	/* Enable diagnostic loopback mode of Seeq8003 */
--
--	volatile u32 rx_dconfig;	/* DMA configuration register */
--#define HPC3_ERXDCFG_D1    0x0000f /* Cycles to spend in D1 state for PIO */
--#define HPC3_ERXDCFG_D2    0x000f0 /* Cycles to spend in D2 state for PIO */
--#define HPC3_ERXDCFG_D3    0x00f00 /* Cycles to spend in D3 state for PIO */
--#define HPC3_ERXDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
--#define HPC3_ERXDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
--#define HPC3_ERXDCFG_FEOP  0x04000 /* Bad packet marker timeout enable */
--#define HPC3_ERXDCFG_FIRQ  0x08000 /* Another bad packet timeout enable */
--#define HPC3_ERXDCFG_PTO   0x30000 /* Programmed timeout value for above two */
--
--	volatile u32 rx_pconfig;	/* PIO configuration register */
--#define HPC3_ERXPCFG_P1    0x000f /* Cycles to spend in P1 state for PIO */
--#define HPC3_ERXPCFG_P2    0x00f0 /* Cycles to spend in P2 state for PIO */
--#define HPC3_ERXPCFG_P3    0x0f00 /* Cycles to spend in P3 state for PIO */
--#define HPC3_ERXPCFG_TST   0x1000 /* Diagnistic ram test feature bit */
-+	volatile u32 reset;	/* reset register */
-+#define HPC3_ERST_CRESET 0x1	/* Reset dma channel and external controller */
-+#define HPC3_ERST_CLRIRQ 0x2	/* Clear channel interrupt */
-+#define HPC3_ERST_LBACK  0x4	/* Enable diagnostic loopback mode of Seeq8003 */
-+
-+	volatile u32 dconfig;    /* DMA configuration register */
-+#define HPC3_EDCFG_D1    0x0000f /* Cycles to spend in D1 state for PIO */
-+#define HPC3_EDCFG_D2    0x000f0 /* Cycles to spend in D2 state for PIO */
-+#define HPC3_EDCFG_D3    0x00f00 /* Cycles to spend in D3 state for PIO */
-+#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
-+#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
-+#define HPC3_EDCFG_FEOP  0x04000 /* Bad packet marker timeout enable */
-+#define HPC3_EDCFG_FIRQ  0x08000 /* Another bad packet timeout enable */
-+#define HPC3_EDCFG_PTO   0x30000 /* Programmed timeout value for above two */
-+
-+	volatile u32 pconfig;   /* PIO configuration register */
-+#define HPC3_EPCFG_P1    0x000f /* Cycles to spend in P1 state for PIO */
-+#define HPC3_EPCFG_P2    0x00f0 /* Cycles to spend in P2 state for PIO */
-+#define HPC3_EPCFG_P3    0x0f00 /* Cycles to spend in P3 state for PIO */
-+#define HPC3_EPCFG_TST   0x1000 /* Diagnistic ram test feature bit */
- 
- 	u32 _unused2[0x1000/4 - 8];	/* padding */
- 
-@@ -221,7 +221,7 @@
- #define HPC3_BESTAT_PIDMASK	0x3f700	/* DMA channel parity identifier */
- 
- 	u32 _unused1[0x14000/4 - 5];	/* padding */
--	
-+
- 	/* Now direct PIO per-HPC3 peripheral access to external regs. */
- 	volatile u32 scsi0_ext[256];	/* SCSI channel 0 external regs */
- 	u32 _unused2[0x7c00/4];
-@@ -304,7 +304,7 @@
- 	volatile u32 bbram[8192-50-14];	/* Battery backed ram */
- };
- 
--/* 
-+/*
-  * It is possible to have two HPC3's within the address space on
-  * one machine, though only having one is more likely on an Indy.
-  */
-diff -Nur linux-2.4.32-rc1/include/asm-mips64/sn/nmi.h linux-2.4.32-rc1.mips/include/asm-mips64/sn/nmi.h
---- linux-2.4.32-rc1/include/asm-mips64/sn/nmi.h	2002-11-29 00:53:15.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips64/sn/nmi.h	2002-08-06 01:53:40.000000000 +0200
-@@ -8,7 +8,7 @@
- #ifndef __ASM_SN_NMI_H
- #define __ASM_SN_NMI_H
- 
--#ident "$Revision: 1.2.4.2 $"
-+#ident "$Revision: 1.2.4.1 $"
- 
- #include <asm/sn/addrs.h>
- 
-diff -Nur linux-2.4.32-rc1/include/asm-mips64/unistd.h linux-2.4.32-rc1.mips/include/asm-mips64/unistd.h
---- linux-2.4.32-rc1/include/asm-mips64/unistd.h	2005-01-19 15:10:12.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-mips64/unistd.h	2004-11-24 21:30:06.000000000 +0100
-@@ -760,7 +760,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- /*
-@@ -788,7 +788,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #define _syscall2(type,name,atype,a,btype,b) \
-@@ -813,7 +813,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #define _syscall3(type,name,atype,a,btype,b,ctype,c) \
-@@ -839,7 +839,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #define _syscall4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
-@@ -865,7 +865,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #if (_MIPS_SIM == _MIPS_SIM_ABI32)
-@@ -902,7 +902,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #define _syscall6(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e,ftype,f) \
-@@ -935,7 +935,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #endif /* (_MIPS_SIM == _MIPS_SIM_ABI32) */
-@@ -966,7 +966,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #define _syscall6(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e,ftype,f) \
-@@ -995,7 +995,7 @@
- 	if (__a3 == 0) \
- 		return (type) __v0; \
- 	errno = __v0; \
--	return -1; \
-+	return (type)-1; \
- }
- 
- #endif /* (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) */
-diff -Nur linux-2.4.32-rc1/include/asm-ppc/param.h linux-2.4.32-rc1.mips/include/asm-ppc/param.h
---- linux-2.4.32-rc1/include/asm-ppc/param.h	2003-06-13 16:51:38.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/asm-ppc/param.h	2003-07-05 05:23:46.000000000 +0200
-@@ -3,6 +3,9 @@
- 
- #ifndef HZ
- #define HZ 100
-+#ifdef __KERNEL__
-+#define hz_to_std(a) (a)
-+#endif
- #endif
- 
- #define EXEC_PAGESIZE	4096
-diff -Nur linux-2.4.32-rc1/include/asm-s390/param.h linux-2.4.32-rc1.mips/include/asm-s390/param.h
---- linux-2.4.32-rc1/include/asm-s390/param.h	2001-02-13 23:13:44.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-s390/param.h	2001-03-09 21:34:48.000000000 +0100
-@@ -11,6 +11,9 @@
- 
- #ifndef HZ
- #define HZ 100
-+#ifdef __KERNEL__
-+#define hz_to_std(a) (a)
-+#endif
- #endif
- 
- #define EXEC_PAGESIZE	4096
-diff -Nur linux-2.4.32-rc1/include/asm-sh/param.h linux-2.4.32-rc1.mips/include/asm-sh/param.h
---- linux-2.4.32-rc1/include/asm-sh/param.h	2001-01-04 22:19:13.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-sh/param.h	2001-01-11 05:02:45.000000000 +0100
-@@ -3,6 +3,9 @@
- 
- #ifndef HZ
- #define HZ 100
-+#ifdef __KERNEL__
-+#define hz_to_std(a) (a)
-+#endif
- #endif
- 
- #define EXEC_PAGESIZE	4096
-diff -Nur linux-2.4.32-rc1/include/asm-sparc/param.h linux-2.4.32-rc1.mips/include/asm-sparc/param.h
---- linux-2.4.32-rc1/include/asm-sparc/param.h	2000-10-30 23:34:12.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-sparc/param.h	2000-11-23 03:00:56.000000000 +0100
-@@ -4,6 +4,9 @@
- 
- #ifndef HZ
- #define HZ 100
-+#ifdef __KERNEL__
-+#define hz_to_std(a) (a)
-+#endif
- #endif
- 
- #define EXEC_PAGESIZE	8192    /* Thanks for sun4's we carry baggage... */
-diff -Nur linux-2.4.32-rc1/include/asm-sparc64/param.h linux-2.4.32-rc1.mips/include/asm-sparc64/param.h
---- linux-2.4.32-rc1/include/asm-sparc64/param.h	2000-10-30 23:34:12.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/asm-sparc64/param.h	2000-11-23 03:00:56.000000000 +0100
-@@ -4,6 +4,9 @@
- 
- #ifndef HZ
- #define HZ 100
-+#ifdef __KERNEL__
-+#define hz_to_std(a) (a)
-+#endif
- #endif
- 
- #define EXEC_PAGESIZE	8192    /* Thanks for sun4's we carry baggage... */
-diff -Nur linux-2.4.32-rc1/include/linux/i2c-algo-au1550.h linux-2.4.32-rc1.mips/include/linux/i2c-algo-au1550.h
---- linux-2.4.32-rc1/include/linux/i2c-algo-au1550.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/linux/i2c-algo-au1550.h	2004-07-07 02:38:02.000000000 +0200
-@@ -0,0 +1,31 @@
-+/*
-+ * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#ifndef I2C_ALGO_AU1550_H
-+#define I2C_ALGO_AU1550_H 1
-+
-+struct i2c_algo_au1550_data {
-+	u32	psc_base;
-+	int	xfer_timeout;
-+	int	ack_timeout;
-+};
-+
-+int i2c_au1550_add_bus(struct i2c_adapter *);
-+int i2c_au1550_del_bus(struct i2c_adapter *);
-+
-+#endif /* I2C_ALGO_AU1550_H */
-diff -Nur linux-2.4.32-rc1/include/linux/i2c-id.h linux-2.4.32-rc1.mips/include/linux/i2c-id.h
---- linux-2.4.32-rc1/include/linux/i2c-id.h	2004-02-18 14:36:32.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/linux/i2c-id.h	2004-07-07 02:38:02.000000000 +0200
-@@ -156,6 +156,8 @@
- 
- #define I2C_ALGO_SGI	0x130000	/* SGI algorithm		*/
- 
-+#define I2C_ALGO_AU1550	0x140000	/* Alchemy Au1550 PSC		*/
-+
- #define I2C_ALGO_EXP	0x800000	/* experimental			*/
- 
- #define I2C_ALGO_MASK	0xff0000	/* Mask for algorithms		*/
-@@ -204,6 +206,9 @@
- #define I2C_HW_SGI_VINO	0x00
- #define I2C_HW_SGI_MACE	0x01
- 
-+/* --- Au1550 PSC adapters						*/
-+#define I2C_HW_AU1550_PSC	0x00
-+
- /* --- SMBus only adapters						*/
- #define I2C_HW_SMBUS_PIIX4	0x00
- #define I2C_HW_SMBUS_ALI15X3	0x01
-diff -Nur linux-2.4.32-rc1/include/linux/sched.h linux-2.4.32-rc1.mips/include/linux/sched.h
---- linux-2.4.32-rc1/include/linux/sched.h	2005-01-19 15:10:12.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/linux/sched.h	2004-11-29 18:47:18.000000000 +0100
-@@ -617,6 +617,10 @@
- extern int in_group_p(gid_t);
- extern int in_egroup_p(gid_t);
- 
-+extern ATTRIB_NORET void cpu_idle(void);
-+
-+extern void release_task(struct task_struct * p);
-+
- extern void proc_caches_init(void);
- extern void flush_signals(struct task_struct *);
- extern void flush_signal_handlers(struct task_struct *);
-diff -Nur linux-2.4.32-rc1/include/linux/serial.h linux-2.4.32-rc1.mips/include/linux/serial.h
---- linux-2.4.32-rc1/include/linux/serial.h	2002-08-03 02:39:45.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/linux/serial.h	2004-07-31 02:17:57.000000000 +0200
-@@ -75,7 +75,8 @@
- #define PORT_16654	11
- #define PORT_16850	12
- #define PORT_RSA	13	/* RSA-DV II/S card */
--#define PORT_MAX	13
-+#define PORT_SB1250	14
-+#define PORT_MAX	14
- 
- #define SERIAL_IO_PORT	0
- #define SERIAL_IO_HUB6	1
-diff -Nur linux-2.4.32-rc1/include/linux/swap.h linux-2.4.32-rc1.mips/include/linux/swap.h
---- linux-2.4.32-rc1/include/linux/swap.h	2005-01-19 15:10:12.000000000 +0100
-+++ linux-2.4.32-rc1.mips/include/linux/swap.h	2004-11-29 18:47:18.000000000 +0100
-@@ -1,6 +1,12 @@
- #ifndef _LINUX_SWAP_H
- #define _LINUX_SWAP_H
- 
-+#include <linux/config.h>
-+
-+#define MAX_SWAPFILES 32
-+
-+#ifdef __KERNEL__
-+
- #include <linux/spinlock.h>
- #include <asm/page.h>
- 
-@@ -8,8 +14,6 @@
- #define SWAP_FLAG_PRIO_MASK	0x7fff
- #define SWAP_FLAG_PRIO_SHIFT	0
- 
--#define MAX_SWAPFILES 32
--
- /*
-  * Magic header for a swap area. The first part of the union is
-  * what the swap magic looks like for the old (limited to 128MB)
-@@ -39,8 +43,6 @@
- 	} info;
- };
- 
--#ifdef __KERNEL__
--
- /*
-  * Max bad pages in the new format..
-  */
-diff -Nur linux-2.4.32-rc1/include/video/newport.h linux-2.4.32-rc1.mips/include/video/newport.h
---- linux-2.4.32-rc1/include/video/newport.h	2001-04-12 21:20:31.000000000 +0200
-+++ linux-2.4.32-rc1.mips/include/video/newport.h	2004-09-23 15:32:29.000000000 +0200
-@@ -291,8 +291,6 @@
- 	unsigned int _unused2[0x1ef];
- 	struct newport_cregs cgo;
- };
--extern struct newport_regs *npregs;
--
- 
- typedef struct {
- 	unsigned int drawmode1;
-@@ -450,38 +448,26 @@
- 
- /* Miscellaneous NEWPORT routines. */
- #define BUSY_TIMEOUT 100000
--static __inline__ int newport_wait(void)
-+static __inline__ int newport_wait(struct newport_regs *regs)
- {
--	int i = 0;
-+	int t = BUSY_TIMEOUT;
- 
--	while(i < BUSY_TIMEOUT)
--		if(!(npregs->cset.status & NPORT_STAT_GBUSY))
-+	while (t--)
-+		if (!(regs->cset.status & NPORT_STAT_GBUSY))
- 			break;
--	if(i == BUSY_TIMEOUT)
--		return 1;
--	return 0;
-+	return !t;
- }
- 
--static __inline__ int newport_bfwait(void)
-+static __inline__ int newport_bfwait(struct newport_regs *regs)
- {
--	int i = 0;
-+	int t = BUSY_TIMEOUT;
- 
--	while(i < BUSY_TIMEOUT)
--		if(!(npregs->cset.status & NPORT_STAT_BBUSY))
-+	while (t--)
-+		if(!(regs->cset.status & NPORT_STAT_BBUSY))
- 			break;
--	if(i == BUSY_TIMEOUT)
--		return 1;
--	return 0;
-+	return !t;
- }
- 
--/* newport.c and cons_newport.c routines */
--extern struct graphics_ops *newport_probe (int, const char **);
--
--void newport_save    (void *);
--void newport_restore (void *);
--void newport_reset   (void);
--int  newport_ioctl   (int card, int cmd, unsigned long arg);
--
- /*
-  * DCBMODE register defines:
-  */
-@@ -564,7 +550,7 @@
- {
-         rex->set.dcbmode = DCB_XMAP0 | XM9_CRS_FIFO_AVAIL |
- 		DCB_DATAWIDTH_1 | R_DCB_XMAP9_PROTOCOL;
--        newport_bfwait ();
-+        newport_bfwait (rex);
- 	
-         while ((rex->set.dcbdata0.bybytes.b3 & 3) != XM9_FIFO_EMPTY)
- 		;
-diff -Nur linux-2.4.32-rc1/init/main.c linux-2.4.32-rc1.mips/init/main.c
---- linux-2.4.32-rc1/init/main.c	2004-11-17 12:54:22.000000000 +0100
-+++ linux-2.4.32-rc1.mips/init/main.c	2004-11-19 01:28:52.000000000 +0100
-@@ -296,7 +296,6 @@
- 
- 
- extern void setup_arch(char **);
--extern void cpu_idle(void);
- 
- unsigned long wait_init_idle;
- 
-diff -Nur linux-2.4.32-rc1/kernel/exit.c linux-2.4.32-rc1.mips/kernel/exit.c
---- linux-2.4.32-rc1/kernel/exit.c	2002-11-29 00:53:15.000000000 +0100
-+++ linux-2.4.32-rc1.mips/kernel/exit.c	2003-01-11 18:53:18.000000000 +0100
-@@ -26,7 +26,7 @@
- 
- int getrusage(struct task_struct *, int, struct rusage *);
- 
--static void release_task(struct task_struct * p)
-+void release_task(struct task_struct * p)
- {
- 	if (p != current) {
- #ifdef CONFIG_SMP
-diff -Nur linux-2.4.32-rc1/kernel/signal.c linux-2.4.32-rc1.mips/kernel/signal.c
---- linux-2.4.32-rc1/kernel/signal.c	2004-02-18 14:36:32.000000000 +0100
-+++ linux-2.4.32-rc1.mips/kernel/signal.c	2004-01-20 16:10:34.000000000 +0100
-@@ -14,6 +14,7 @@
- #include <linux/init.h>
- #include <linux/sched.h>
- 
-+#include <asm/param.h>
- #include <asm/uaccess.h>
- 
- /*
-@@ -28,6 +29,14 @@
- #define SIG_SLAB_DEBUG	0
- #endif
- 
-+#define DEBUG_SIG 0
-+
-+#if DEBUG_SIG
-+#define SIG_SLAB_DEBUG	(SLAB_DEBUG_FREE | SLAB_RED_ZONE /* | SLAB_POISON */)
-+#else
-+#define SIG_SLAB_DEBUG	0
-+#endif
-+
- static kmem_cache_t *sigqueue_cachep;
- 
- atomic_t nr_queued_signals;
-@@ -270,6 +279,11 @@
- 	signal_pending(current));
- #endif
- 
-+#if DEBUG_SIG
-+printk("SIG dequeue (%s:%d): %d ", current->comm, current->pid,
-+	signal_pending(current));
-+#endif
-+
- 	sig = next_signal(current, mask);
- 	if (sig) {
- 		if (current->notifier) {
-@@ -293,6 +307,10 @@
- printk(" %d -> %d\n", signal_pending(current), sig);
- #endif
- 
-+#if DEBUG_SIG
-+printk(" %d -> %d\n", signal_pending(current), sig);
-+#endif
-+
- 	return sig;
- }
- 
-@@ -540,6 +558,11 @@
- printk("SIG queue (%s:%d): %d ", t->comm, t->pid, sig);
- #endif
- 
-+
-+#if DEBUG_SIG
-+printk("SIG queue (%s:%d): %d ", t->comm, t->pid, sig);
-+#endif
-+
- 	ret = -EINVAL;
- 	if (sig < 0 || sig > _NSIG)
- 		goto out_nolock;
-@@ -778,8 +801,8 @@
- 	info.si_uid = tsk->uid;
- 
- 	/* FIXME: find out whether or not this is supposed to be c*time. */
--	info.si_utime = tsk->times.tms_utime;
--	info.si_stime = tsk->times.tms_stime;
-+	info.si_utime = hz_to_std(tsk->times.tms_utime);
-+	info.si_stime = hz_to_std(tsk->times.tms_stime);
- 
- 	status = tsk->exit_code & 0x7f;
- 	why = SI_KERNEL;	/* shouldn't happen */
-diff -Nur linux-2.4.32-rc1/kernel/sys.c linux-2.4.32-rc1.mips/kernel/sys.c
---- linux-2.4.32-rc1/kernel/sys.c	2003-11-28 19:26:21.000000000 +0100
-+++ linux-2.4.32-rc1.mips/kernel/sys.c	2003-11-17 02:07:47.000000000 +0100
-@@ -801,16 +801,23 @@
- 
- asmlinkage long sys_times(struct tms * tbuf)
- {
-+	struct tms temp;
-+
- 	/*
- 	 *	In the SMP world we might just be unlucky and have one of
- 	 *	the times increment as we use it. Since the value is an
- 	 *	atomically safe type this is just fine. Conceptually its
- 	 *	as if the syscall took an instant longer to occur.
- 	 */
--	if (tbuf)
--		if (copy_to_user(tbuf, &current->times, sizeof(struct tms)))
-+	if (tbuf) {
-+		temp.tms_utime = hz_to_std(current->times.tms_utime);
-+		temp.tms_stime = hz_to_std(current->times.tms_stime);
-+		temp.tms_cutime = hz_to_std(current->times.tms_cutime);
-+		temp.tms_cstime = hz_to_std(current->times.tms_cstime);
-+		if (copy_to_user(tbuf, &temp, sizeof(struct tms)))
- 			return -EFAULT;
--	return jiffies;
-+	}
-+	return hz_to_std(jiffies);
- }
- 
- /*
-diff -Nur linux-2.4.32-rc1/lib/Makefile linux-2.4.32-rc1.mips/lib/Makefile
---- linux-2.4.32-rc1/lib/Makefile	2004-04-14 15:05:40.000000000 +0200
-+++ linux-2.4.32-rc1.mips/lib/Makefile	2004-04-16 05:14:21.000000000 +0200
-@@ -27,6 +27,7 @@
- subdir-$(CONFIG_ZLIB_INFLATE) += zlib_inflate
- subdir-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate
- 
-+-include $(TOPDIR)/arch/$(ARCH)/Makefile.lib
- include $(TOPDIR)/drivers/net/Makefile.lib
- include $(TOPDIR)/drivers/usb/Makefile.lib
- include $(TOPDIR)/drivers/bluetooth/Makefile.lib
-diff -Nur linux-2.4.32-rc1/Makefile linux-2.4.32-rc1.mips/Makefile
---- linux-2.4.32-rc1/Makefile	2005-10-24 11:33:30.000000000 +0200
-+++ linux-2.4.32-rc1.mips/Makefile	2005-09-23 22:41:15.000000000 +0200
-@@ -5,7 +5,7 @@
- 
- KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
- 
--ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)
-+ARCH = mips
- KERNELPATH=kernel-$(shell echo $(KERNELRELEASE) | sed -e "s/-//g")
- 
- CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
-@@ -462,10 +462,11 @@
- 	$(MAKE) -C Documentation/DocBook mrproper
- 
- distclean: mrproper
--	rm -f core `find . \( -not -type d \) -and \
--		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
--		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
--		-o -name '.*.rej' -o -name '.SUMS' -o -size 0 \) -type f -print` TAGS tags
-+	find . \( -not -type d \) -and \
-+		\( -name core -o -name '*.orig' -o -name '*.rej' \
-+		-o -name '*~' -o -name '*.bak' -o -name '#*#' \
-+		-o -name '.*.rej' -o -name '.SUMS' -o -size 0 \
-+		-o -name TAGS -o -name tags \) -print | env -i xargs rm -f
- 
- backup: mrproper
- 	cd .. && tar cf - linux/ | gzip -9 > backup.gz
-@@ -492,7 +493,7 @@
- 	$(MAKE) -C Documentation/DocBook man
- 
- sums:
--	find . -type f -print | sort | xargs sum > .SUMS
-+	find . -type f -print | sort | env -i xargs sum > .SUMS
- 
- dep-files: scripts/mkdep archdep include/linux/version.h
- 	rm -f .depend .hdepend
diff --git a/openwrt/target/linux/generic-2.4/patches/001-squashfs.patch b/openwrt/target/linux/generic-2.4/patches/001-squashfs.patch
deleted file mode 100644
index b2d9cf3707..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/001-squashfs.patch
+++ /dev/null
@@ -1,4070 +0,0 @@
-diff --new-file -urp linux-2.4.32/fs/Config.in linux-2.4.32-squashfs3.0/fs/Config.in
---- linux-2.4.32/fs/Config.in	2004-11-17 11:54:21.000000000 +0000
-+++ linux-2.4.32-squashfs3.0/fs/Config.in	2006-03-07 21:12:36.000000000 +0000
-@@ -51,6 +51,14 @@ if [ "$CONFIG_JFFS2_FS" = "y" -o "$CONFI
-    int 'JFFS2 debugging verbosity (0 = quiet, 2 = noisy)' CONFIG_JFFS2_FS_DEBUG 0
- fi
- tristate 'Compressed ROM file system support' CONFIG_CRAMFS
-+tristate 'Squashed file system support' CONFIG_SQUASHFS
-+if [ "$CONFIG_SQUASHFS" = "y" -o "$CONFIG_SQUASHFS" = "m" ] ; then
-+bool 'Additional options for memory constrained systems ' CONFIG_SQUASHFS_EMBEDDED
-+fi
-+if [ "$CONFIG_SQUASHFS_EMBEDDED" = "y" ] ; then
-+int 'Number of fragments cached' CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE 3
-+bool 'Use Vmalloc rather than Kmalloc'  CONFIG_SQUASHFS_VMALLOC
-+fi
- bool 'Virtual memory file system support (former shm fs)' CONFIG_TMPFS
- define_bool CONFIG_RAMFS y
- 
-diff --new-file -urp linux-2.4.32/fs/Makefile linux-2.4.32-squashfs3.0/fs/Makefile
---- linux-2.4.32/fs/Makefile	2004-02-18 13:36:31.000000000 +0000
-+++ linux-2.4.32-squashfs3.0/fs/Makefile	2006-03-07 21:12:36.000000000 +0000
-@@ -65,6 +65,7 @@ subdir-$(CONFIG_REISERFS_FS)	+= reiserfs
- subdir-$(CONFIG_DEVPTS_FS)	+= devpts
- subdir-$(CONFIG_SUN_OPENPROMFS)	+= openpromfs
- subdir-$(CONFIG_BEFS_FS)	+= befs
-+subdir-$(CONFIG_SQUASHFS)	+= squashfs
- subdir-$(CONFIG_JFS_FS)		+= jfs
- subdir-$(CONFIG_XFS_FS)		+= xfs
- 
-diff --new-file -urp linux-2.4.32/fs/squashfs/inode.c linux-2.4.32-squashfs3.0/fs/squashfs/inode.c
---- linux-2.4.32/fs/squashfs/inode.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-squashfs3.0/fs/squashfs/inode.c	2006-03-07 21:12:36.000000000 +0000
-@@ -0,0 +1,2028 @@
-+/*
-+ * Squashfs - a compressed read only filesystem for Linux
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006
-+ * Phillip Lougher <phillip@lougher.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * inode.c
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/squashfs_fs.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/fs.h>
-+#include <linux/smp_lock.h>
-+#include <linux/locks.h>
-+#include <linux/init.h>
-+#include <linux/dcache.h>
-+#include <linux/wait.h>
-+#include <linux/zlib.h>
-+#include <linux/blkdev.h>
-+#include <linux/vmalloc.h>
-+#include <asm/uaccess.h>
-+#include <asm/semaphore.h>
-+
-+#include "squashfs.h"
-+
-+static struct super_block *squashfs_read_super(struct super_block *, void *, int);
-+static void squashfs_put_super(struct super_block *);
-+static int squashfs_statfs(struct super_block *, struct statfs *);
-+static int squashfs_symlink_readpage(struct file *file, struct page *page);
-+static int squashfs_readpage(struct file *file, struct page *page);
-+static int squashfs_readpage4K(struct file *file, struct page *page);
-+static int squashfs_readdir(struct file *, void *, filldir_t);
-+static struct dentry *squashfs_lookup(struct inode *, struct dentry *);
-+static struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode);
-+static long long read_blocklist(struct inode *inode, int index,
-+				int readahead_blks, char *block_list,
-+				unsigned short **block_p, unsigned int *bsize);
-+
-+static z_stream stream;
-+
-+static DECLARE_FSTYPE_DEV(squashfs_fs_type, "squashfs", squashfs_read_super);
-+
-+static unsigned char squashfs_filetype_table[] = {
-+	DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK
-+};
-+
-+static struct super_operations squashfs_ops = {
-+	.statfs = squashfs_statfs,
-+	.put_super = squashfs_put_super,
-+};
-+
-+SQSH_EXTERN struct address_space_operations squashfs_symlink_aops = {
-+	.readpage = squashfs_symlink_readpage
-+};
-+
-+SQSH_EXTERN struct address_space_operations squashfs_aops = {
-+	.readpage = squashfs_readpage
-+};
-+
-+SQSH_EXTERN struct address_space_operations squashfs_aops_4K = {
-+	.readpage = squashfs_readpage4K
-+};
-+
-+static struct file_operations squashfs_dir_ops = {
-+	.read = generic_read_dir,
-+	.readdir = squashfs_readdir
-+};
-+
-+static struct inode_operations squashfs_dir_inode_ops = {
-+	.lookup = squashfs_lookup
-+};
-+
-+static struct buffer_head *get_block_length(struct super_block *s,
-+				int *cur_index, int *offset, int *c_byte)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	unsigned short temp;
-+	struct buffer_head *bh;
-+
-+	if (!(bh = sb_bread(s, *cur_index)))
-+		goto out;
-+
-+	if (msblk->devblksize - *offset == 1) {
-+		if (msblk->swap)
-+			((unsigned char *) &temp)[1] = *((unsigned char *)
-+				(bh->b_data + *offset));
-+		else
-+			((unsigned char *) &temp)[0] = *((unsigned char *)
-+				(bh->b_data + *offset));
-+		brelse(bh);
-+		if (!(bh = sb_bread(s, ++(*cur_index))))
-+			goto out;
-+		if (msblk->swap)
-+			((unsigned char *) &temp)[0] = *((unsigned char *)
-+				bh->b_data); 
-+		else
-+			((unsigned char *) &temp)[1] = *((unsigned char *)
-+				bh->b_data); 
-+		*c_byte = temp;
-+		*offset = 1;
-+	} else {
-+		if (msblk->swap) {
-+			((unsigned char *) &temp)[1] = *((unsigned char *)
-+				(bh->b_data + *offset));
-+			((unsigned char *) &temp)[0] = *((unsigned char *)
-+				(bh->b_data + *offset + 1)); 
-+		} else {
-+			((unsigned char *) &temp)[0] = *((unsigned char *)
-+				(bh->b_data + *offset));
-+			((unsigned char *) &temp)[1] = *((unsigned char *)
-+				(bh->b_data + *offset + 1)); 
-+		}
-+		*c_byte = temp;
-+		*offset += 2;
-+	}
-+
-+	if (SQUASHFS_CHECK_DATA(msblk->sblk.flags)) {
-+		if (*offset == msblk->devblksize) {
-+			brelse(bh);
-+			if (!(bh = sb_bread(s, ++(*cur_index))))
-+				goto out;
-+			*offset = 0;
-+		}
-+		if (*((unsigned char *) (bh->b_data + *offset)) !=
-+						SQUASHFS_MARKER_BYTE) {
-+			ERROR("Metadata block marker corrupt @ %x\n",
-+						*cur_index);
-+			brelse(bh);
-+			goto out;
-+		}
-+		(*offset)++;
-+	}
-+	return bh;
-+
-+out:
-+	return NULL;
-+}
-+
-+
-+SQSH_EXTERN unsigned int squashfs_read_data(struct super_block *s, char *buffer,
-+			long long index, unsigned int length,
-+			long long *next_index)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct buffer_head *bh[((SQUASHFS_FILE_MAX_SIZE - 1) >>
-+			msblk->devblksize_log2) + 2];
-+	unsigned int offset = index & ((1 << msblk->devblksize_log2) - 1);
-+	unsigned int cur_index = index >> msblk->devblksize_log2;
-+	int bytes, avail_bytes, b = 0, k;
-+	char *c_buffer;
-+	unsigned int compressed;
-+	unsigned int c_byte = length;
-+
-+	if (c_byte) {
-+		bytes = msblk->devblksize - offset;
-+		compressed = SQUASHFS_COMPRESSED_BLOCK(c_byte);
-+		c_buffer = compressed ? msblk->read_data : buffer;
-+		c_byte = SQUASHFS_COMPRESSED_SIZE_BLOCK(c_byte);
-+
-+		TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed
-+					? "" : "un", (unsigned int) c_byte);
-+
-+		if (!(bh[0] = sb_getblk(s, cur_index)))
-+			goto block_release;
-+
-+		for (b = 1; bytes < c_byte; b++) {
-+			if (!(bh[b] = sb_getblk(s, ++cur_index)))
-+				goto block_release;
-+			bytes += msblk->devblksize;
-+		}
-+		ll_rw_block(READ, b, bh);
-+	} else {
-+		if (!(bh[0] = get_block_length(s, &cur_index, &offset,
-+								&c_byte)))
-+			goto read_failure;
-+
-+		bytes = msblk->devblksize - offset;
-+		compressed = SQUASHFS_COMPRESSED(c_byte);
-+		c_buffer = compressed ? msblk->read_data : buffer;
-+		c_byte = SQUASHFS_COMPRESSED_SIZE(c_byte);
-+
-+		TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed
-+					? "" : "un", (unsigned int) c_byte);
-+
-+		for (b = 1; bytes < c_byte; b++) {
-+			if (!(bh[b] = sb_getblk(s, ++cur_index)))
-+				goto block_release;
-+			bytes += msblk->devblksize;
-+		}
-+		ll_rw_block(READ, b - 1, bh + 1);
-+	}
-+
-+	if (compressed)
-+		down(&msblk->read_data_mutex);
-+
-+	for (bytes = 0, k = 0; k < b; k++) {
-+		avail_bytes = (c_byte - bytes) > (msblk->devblksize - offset) ?
-+					msblk->devblksize - offset :
-+					c_byte - bytes;
-+		wait_on_buffer(bh[k]);
-+		if (!buffer_uptodate(bh[k]))
-+			goto block_release;
-+		memcpy(c_buffer + bytes, bh[k]->b_data + offset, avail_bytes);
-+		bytes += avail_bytes;
-+		offset = 0;
-+		brelse(bh[k]);
-+	}
-+
-+	/*
-+	 * uncompress block
-+	 */
-+	if (compressed) {
-+		int zlib_err;
-+
-+		stream.next_in = c_buffer;
-+		stream.avail_in = c_byte;
-+		stream.next_out = buffer;
-+		stream.avail_out = msblk->read_size;
-+
-+		if (((zlib_err = zlib_inflateInit(&stream)) != Z_OK) ||
-+				((zlib_err = zlib_inflate(&stream, Z_FINISH))
-+				 != Z_STREAM_END) || ((zlib_err =
-+				zlib_inflateEnd(&stream)) != Z_OK)) {
-+			ERROR("zlib_fs returned unexpected result 0x%x\n",
-+				zlib_err);
-+			bytes = 0;
-+		} else
-+			bytes = stream.total_out;
-+		
-+		up(&msblk->read_data_mutex);
-+	}
-+
-+	if (next_index)
-+		*next_index = index + c_byte + (length ? 0 :
-+				(SQUASHFS_CHECK_DATA(msblk->sblk.flags)
-+				 ? 3 : 2));
-+	return bytes;
-+
-+block_release:
-+	while (--b >= 0)
-+		brelse(bh[b]);
-+
-+read_failure:
-+	ERROR("sb_bread failed reading block 0x%x\n", cur_index);
-+	return 0;
-+}
-+
-+
-+SQSH_EXTERN int squashfs_get_cached_block(struct super_block *s, char *buffer,
-+				long long block, unsigned int offset,
-+				int length, long long *next_block,
-+				unsigned int *next_offset)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	int n, i, bytes, return_length = length;
-+	long long next_index;
-+
-+	TRACE("Entered squashfs_get_cached_block [%llx:%x]\n", block, offset);
-+
-+	while ( 1 ) {
-+		for (i = 0; i < SQUASHFS_CACHED_BLKS; i++) 
-+			if (msblk->block_cache[i].block == block)
-+				break; 
-+		
-+		down(&msblk->block_cache_mutex);
-+
-+		if (i == SQUASHFS_CACHED_BLKS) {
-+			/* read inode header block */
-+			for (i = msblk->next_cache, n = SQUASHFS_CACHED_BLKS;
-+					n ; n --, i = (i + 1) %
-+					SQUASHFS_CACHED_BLKS)
-+				if (msblk->block_cache[i].block !=
-+							SQUASHFS_USED_BLK)
-+					break;
-+
-+			if (n == 0) {
-+				wait_queue_t wait;
-+
-+				init_waitqueue_entry(&wait, current);
-+				add_wait_queue(&msblk->waitq, &wait);
-+				set_current_state(TASK_UNINTERRUPTIBLE);
-+ 				up(&msblk->block_cache_mutex);
-+				schedule();
-+				set_current_state(TASK_RUNNING);
-+				remove_wait_queue(&msblk->waitq, &wait);
-+				continue;
-+			}
-+			msblk->next_cache = (i + 1) % SQUASHFS_CACHED_BLKS;
-+
-+			if (msblk->block_cache[i].block ==
-+							SQUASHFS_INVALID_BLK) {
-+				if (!(msblk->block_cache[i].data =
-+						kmalloc(SQUASHFS_METADATA_SIZE,
-+						GFP_KERNEL))) {
-+					ERROR("Failed to allocate cache"
-+							"block\n");
-+					up(&msblk->block_cache_mutex);
-+					goto out;
-+				}
-+			}
-+	
-+			msblk->block_cache[i].block = SQUASHFS_USED_BLK;
-+			up(&msblk->block_cache_mutex);
-+
-+			if (!(msblk->block_cache[i].length =
-+						squashfs_read_data(s,
-+						msblk->block_cache[i].data,
-+						block, 0, &next_index))) {
-+				ERROR("Unable to read cache block [%llx:%x]\n",
-+						block, offset);
-+				goto out;
-+			}
-+
-+			down(&msblk->block_cache_mutex);
-+			wake_up(&msblk->waitq);
-+			msblk->block_cache[i].block = block;
-+			msblk->block_cache[i].next_index = next_index;
-+			TRACE("Read cache block [%llx:%x]\n", block, offset);
-+		}
-+
-+		if (msblk->block_cache[i].block != block) {
-+			up(&msblk->block_cache_mutex);
-+			continue;
-+		}
-+
-+		if ((bytes = msblk->block_cache[i].length - offset) >= length) {
-+			if (buffer)
-+				memcpy(buffer, msblk->block_cache[i].data +
-+						offset, length);
-+			if (msblk->block_cache[i].length - offset == length) {
-+				*next_block = msblk->block_cache[i].next_index;
-+				*next_offset = 0;
-+			} else {
-+				*next_block = block;
-+				*next_offset = offset + length;
-+			}
-+			up(&msblk->block_cache_mutex);
-+			goto finish;
-+		} else {
-+			if (buffer) {
-+				memcpy(buffer, msblk->block_cache[i].data +
-+						offset, bytes);
-+				buffer += bytes;
-+			}
-+			block = msblk->block_cache[i].next_index;
-+			up(&msblk->block_cache_mutex);
-+			length -= bytes;
-+			offset = 0;
-+		}
-+	}
-+
-+finish:
-+	return return_length;
-+out:
-+	return 0;
-+}
-+
-+
-+static int get_fragment_location(struct super_block *s, unsigned int fragment,
-+				long long *fragment_start_block,
-+				unsigned int *fragment_size)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	long long start_block =
-+		msblk->fragment_index[SQUASHFS_FRAGMENT_INDEX(fragment)];
-+	int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment);
-+	struct squashfs_fragment_entry fragment_entry;
-+
-+	if (msblk->swap) {
-+		struct squashfs_fragment_entry sfragment_entry;
-+
-+		if (!squashfs_get_cached_block(s, (char *) &sfragment_entry,
-+					start_block, offset,
-+					sizeof(sfragment_entry), &start_block,
-+					&offset))
-+			goto out;
-+		SQUASHFS_SWAP_FRAGMENT_ENTRY(&fragment_entry, &sfragment_entry);
-+	} else
-+		if (!squashfs_get_cached_block(s, (char *) &fragment_entry,
-+					start_block, offset,
-+					sizeof(fragment_entry), &start_block,
-+					&offset))
-+			goto out;
-+
-+	*fragment_start_block = fragment_entry.start_block;
-+	*fragment_size = fragment_entry.size;
-+
-+	return 1;
-+
-+out:
-+	return 0;
-+}
-+
-+
-+SQSH_EXTERN void release_cached_fragment(struct squashfs_sb_info *msblk, struct
-+					squashfs_fragment_cache *fragment)
-+{
-+	down(&msblk->fragment_mutex);
-+	fragment->locked --;
-+	wake_up(&msblk->fragment_wait_queue);
-+	up(&msblk->fragment_mutex);
-+}
-+
-+
-+SQSH_EXTERN struct squashfs_fragment_cache *get_cached_fragment(struct super_block
-+					*s, long long start_block,
-+					int length)
-+{
-+	int i, n;
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+
-+	while ( 1 ) {
-+		down(&msblk->fragment_mutex);
-+
-+		for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS &&
-+				msblk->fragment[i].block != start_block; i++);
-+
-+		if (i == SQUASHFS_CACHED_FRAGMENTS) {
-+			for (i = msblk->next_fragment, n =
-+				SQUASHFS_CACHED_FRAGMENTS; n &&
-+				msblk->fragment[i].locked; n--, i = (i + 1) %
-+				SQUASHFS_CACHED_FRAGMENTS);
-+
-+			if (n == 0) {
-+				wait_queue_t wait;
-+
-+				init_waitqueue_entry(&wait, current);
-+				add_wait_queue(&msblk->fragment_wait_queue,
-+									&wait);
-+				set_current_state(TASK_UNINTERRUPTIBLE);
-+				up(&msblk->fragment_mutex);
-+				schedule();
-+				set_current_state(TASK_RUNNING);
-+				remove_wait_queue(&msblk->fragment_wait_queue,
-+									&wait);
-+				continue;
-+			}
-+			msblk->next_fragment = (msblk->next_fragment + 1) %
-+				SQUASHFS_CACHED_FRAGMENTS;
-+			
-+			if (msblk->fragment[i].data == NULL)
-+				if (!(msblk->fragment[i].data = SQUASHFS_ALLOC
-+						(SQUASHFS_FILE_MAX_SIZE))) {
-+					ERROR("Failed to allocate fragment "
-+							"cache block\n");
-+					up(&msblk->fragment_mutex);
-+					goto out;
-+				}
-+
-+			msblk->fragment[i].block = SQUASHFS_INVALID_BLK;
-+			msblk->fragment[i].locked = 1;
-+			up(&msblk->fragment_mutex);
-+
-+			if (!(msblk->fragment[i].length = squashfs_read_data(s,
-+						msblk->fragment[i].data,
-+						start_block, length, NULL))) {
-+				ERROR("Unable to read fragment cache block "
-+							"[%llx]\n", start_block);
-+				msblk->fragment[i].locked = 0;
-+				goto out;
-+			}
-+
-+			msblk->fragment[i].block = start_block;
-+			TRACE("New fragment %d, start block %lld, locked %d\n",
-+						i, msblk->fragment[i].block,
-+						msblk->fragment[i].locked);
-+			break;
-+		}
-+
-+		msblk->fragment[i].locked++;
-+		up(&msblk->fragment_mutex);
-+		TRACE("Got fragment %d, start block %lld, locked %d\n", i,
-+						msblk->fragment[i].block,
-+						msblk->fragment[i].locked);
-+		break;
-+	}
-+
-+	return &msblk->fragment[i];
-+
-+out:
-+	return NULL;
-+}
-+
-+
-+static struct inode *squashfs_new_inode(struct super_block *s,
-+		struct squashfs_base_inode_header *inodeb)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct inode *i = new_inode(s);
-+
-+	if (i) {
-+		i->i_ino = inodeb->inode_number;
-+		i->i_mtime = inodeb->mtime;
-+		i->i_atime = inodeb->mtime;
-+		i->i_ctime = inodeb->mtime;
-+		i->i_uid = msblk->uid[inodeb->uid];
-+		i->i_mode = inodeb->mode;
-+		i->i_size = 0;
-+		if (inodeb->guid == SQUASHFS_GUIDS)
-+			i->i_gid = i->i_uid;
-+		else
-+			i->i_gid = msblk->guid[inodeb->guid];
-+	}
-+
-+	return i;
-+}
-+
-+
-+static struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode)
-+{
-+	struct inode *i;
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long block = SQUASHFS_INODE_BLK(inode) +
-+		sblk->inode_table_start;
-+	unsigned int offset = SQUASHFS_INODE_OFFSET(inode);
-+	long long next_block;
-+	unsigned int next_offset;
-+	union squashfs_inode_header id, sid;
-+	struct squashfs_base_inode_header *inodeb = &id.base,
-+					  *sinodeb = &sid.base;
-+
-+	TRACE("Entered squashfs_iget\n");
-+
-+	if (msblk->swap) {
-+		if (!squashfs_get_cached_block(s, (char *) sinodeb, block,
-+					offset, sizeof(*sinodeb), &next_block,
-+					&next_offset))
-+			goto failed_read;
-+		SQUASHFS_SWAP_BASE_INODE_HEADER(inodeb, sinodeb,
-+					sizeof(*sinodeb));
-+	} else
-+		if (!squashfs_get_cached_block(s, (char *) inodeb, block,
-+					offset, sizeof(*inodeb), &next_block,
-+					&next_offset))
-+			goto failed_read;
-+
-+	switch(inodeb->inode_type) {
-+		case SQUASHFS_FILE_TYPE: {
-+			unsigned int frag_size;
-+			long long frag_blk;
-+			struct squashfs_reg_inode_header *inodep = &id.reg;
-+			struct squashfs_reg_inode_header *sinodep = &sid.reg;
-+				
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_REG_INODE_HEADER(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			frag_blk = SQUASHFS_INVALID_BLK;
-+			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
-+					!get_fragment_location(s,
-+					inodep->fragment, &frag_blk, &frag_size))
-+				goto failed_read;
-+				
-+			if((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = 1;
-+			i->i_size = inodep->file_size;
-+			i->i_fop = &generic_ro_fops;
-+			i->i_mode |= S_IFREG;
-+			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
-+			i->i_blksize = PAGE_CACHE_SIZE;
-+			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
-+			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
-+			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+			if (sblk->block_size > 4096)
-+				i->i_data.a_ops = &squashfs_aops;
-+			else
-+				i->i_data.a_ops = &squashfs_aops_4K;
-+
-+			TRACE("File inode %x:%x, start_block %llx, "
-+					"block_list_start %llx, offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, next_block,
-+					next_offset);
-+			break;
-+		}
-+		case SQUASHFS_LREG_TYPE: {
-+			unsigned int frag_size;
-+			long long frag_blk;
-+			struct squashfs_lreg_inode_header *inodep = &id.lreg;
-+			struct squashfs_lreg_inode_header *sinodep = &sid.lreg;
-+				
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_LREG_INODE_HEADER(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			frag_blk = SQUASHFS_INVALID_BLK;
-+			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
-+					!get_fragment_location(s,
-+					inodep->fragment, &frag_blk, &frag_size))
-+				goto failed_read;
-+				
-+			if((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_size = inodep->file_size;
-+			i->i_fop = &generic_ro_fops;
-+			i->i_mode |= S_IFREG;
-+			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
-+			i->i_blksize = PAGE_CACHE_SIZE;
-+			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
-+			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
-+			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+			if (sblk->block_size > 4096)
-+				i->i_data.a_ops = &squashfs_aops;
-+			else
-+				i->i_data.a_ops = &squashfs_aops_4K;
-+
-+			TRACE("File inode %x:%x, start_block %llx, "
-+					"block_list_start %llx, offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, next_block,
-+					next_offset);
-+			break;
-+		}
-+		case SQUASHFS_DIR_TYPE: {
-+			struct squashfs_dir_inode_header *inodep = &id.dir;
-+			struct squashfs_dir_inode_header *sinodep = &sid.dir;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_DIR_INODE_HEADER(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_size = inodep->file_size;
-+			i->i_op = &squashfs_dir_inode_ops;
-+			i->i_fop = &squashfs_dir_ops;
-+			i->i_mode |= S_IFDIR;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->offset = inodep->offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_count = 0;
-+			SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode;
-+
-+			TRACE("Directory inode %x:%x, start_block %x, offset "
-+					"%x\n", SQUASHFS_INODE_BLK(inode),
-+					offset, inodep->start_block,
-+					inodep->offset);
-+			break;
-+		}
-+		case SQUASHFS_LDIR_TYPE: {
-+			struct squashfs_ldir_inode_header *inodep = &id.ldir;
-+			struct squashfs_ldir_inode_header *sinodep = &sid.ldir;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_LDIR_INODE_HEADER(inodep,
-+						sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_size = inodep->file_size;
-+			i->i_op = &squashfs_dir_inode_ops;
-+			i->i_fop = &squashfs_dir_ops;
-+			i->i_mode |= S_IFDIR;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->offset = inodep->offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_start = next_block;
-+			SQUASHFS_I(i)->u.s2.directory_index_offset =
-+								next_offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_count =
-+								inodep->i_count;
-+			SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode;
-+
-+			TRACE("Long directory inode %x:%x, start_block %x, "
-+					"offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, inodep->offset);
-+			break;
-+		}
-+		case SQUASHFS_SYMLINK_TYPE: {
-+			struct squashfs_symlink_inode_header *inodep =
-+								&id.symlink;
-+			struct squashfs_symlink_inode_header *sinodep =
-+								&sid.symlink;
-+	
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_SYMLINK_INODE_HEADER(inodep,
-+								sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_size = inodep->symlink_size;
-+			i->i_op = &page_symlink_inode_operations;
-+			i->i_data.a_ops = &squashfs_symlink_aops;
-+			i->i_mode |= S_IFLNK;
-+			SQUASHFS_I(i)->start_block = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+
-+			TRACE("Symbolic link inode %x:%x, start_block %llx, "
-+					"offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					next_block, next_offset);
-+			break;
-+		 }
-+		 case SQUASHFS_BLKDEV_TYPE:
-+		 case SQUASHFS_CHRDEV_TYPE: {
-+			struct squashfs_dev_inode_header *inodep = &id.dev;
-+			struct squashfs_dev_inode_header *sinodep = &sid.dev;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_DEV_INODE_HEADER(inodep, sinodep);
-+			} else	
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if ((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_mode |= (inodeb->inode_type ==
-+					SQUASHFS_CHRDEV_TYPE) ?  S_IFCHR :
-+					S_IFBLK;
-+			init_special_inode(i, i->i_mode, inodep->rdev);
-+
-+			TRACE("Device inode %x:%x, rdev %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->rdev);
-+			break;
-+		 }
-+		 case SQUASHFS_FIFO_TYPE:
-+		 case SQUASHFS_SOCKET_TYPE: {
-+			struct squashfs_ipc_inode_header *inodep = &id.ipc;
-+			struct squashfs_ipc_inode_header *sinodep = &sid.ipc;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_IPC_INODE_HEADER(inodep, sinodep);
-+			} else	
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if ((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE)
-+							? S_IFIFO : S_IFSOCK;
-+			init_special_inode(i, i->i_mode, 0);
-+			break;
-+		 }
-+		 default:
-+			ERROR("Unknown inode type %d in squashfs_iget!\n",
-+					inodeb->inode_type);
-+			goto failed_read1;
-+	}
-+	
-+	insert_inode_hash(i);
-+	return i;
-+
-+failed_read:
-+	ERROR("Unable to read inode [%llx:%x]\n", block, offset);
-+
-+failed_read1:
-+	return NULL;
-+}
-+
-+
-+int read_fragment_index_table(struct super_block *s)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	if (!(msblk->fragment_index = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES
-+					(sblk->fragments), GFP_KERNEL))) {
-+		ERROR("Failed to allocate uid/gid table\n");
-+		return 0;
-+	}
-+   
-+	if (SQUASHFS_FRAGMENT_INDEX_BYTES(sblk->fragments) &&
-+					!squashfs_read_data(s, (char *)
-+					msblk->fragment_index,
-+					sblk->fragment_table_start,
-+					SQUASHFS_FRAGMENT_INDEX_BYTES
-+					(sblk->fragments) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
-+		ERROR("unable to read fragment index table\n");
-+		return 0;
-+	}
-+
-+	if (msblk->swap) {
-+		int i;
-+		long long fragment;
-+
-+		for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES(sblk->fragments);
-+									i++) {
-+			SQUASHFS_SWAP_FRAGMENT_INDEXES((&fragment),
-+						&msblk->fragment_index[i], 1);
-+			msblk->fragment_index[i] = fragment;
-+		}
-+	}
-+
-+	return 1;
-+}
-+
-+
-+static int supported_squashfs_filesystem(struct squashfs_sb_info *msblk, int silent)
-+{
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	msblk->iget = squashfs_iget;
-+	msblk->read_blocklist = read_blocklist;
-+	msblk->read_fragment_index_table = read_fragment_index_table;
-+
-+	if (sblk->s_major == 1) {
-+		if (!squashfs_1_0_supported(msblk)) {
-+			SERROR("Major/Minor mismatch, Squashfs 1.0 filesystems "
-+				"are unsupported\n");
-+			SERROR("Please recompile with "
-+				"Squashfs 1.0 support enabled\n");
-+			return 0;
-+		}
-+	} else if (sblk->s_major == 2) {
-+		if (!squashfs_2_0_supported(msblk)) {
-+			SERROR("Major/Minor mismatch, Squashfs 2.0 filesystems "
-+				"are unsupported\n");
-+			SERROR("Please recompile with "
-+				"Squashfs 2.0 support enabled\n");
-+			return 0;
-+		}
-+	} else if(sblk->s_major != SQUASHFS_MAJOR || sblk->s_minor >
-+			SQUASHFS_MINOR) {
-+		SERROR("Major/Minor mismatch, trying to mount newer %d.%d "
-+				"filesystem\n", sblk->s_major, sblk->s_minor);
-+		SERROR("Please update your kernel\n");
-+		return 0;
-+	}
-+
-+	return 1;
-+}
-+
-+
-+static struct super_block *squashfs_read_super(struct super_block *s,
-+		void *data, int silent)
-+{
-+	kdev_t dev = s->s_dev;
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i;
-+	struct inode *root;
-+	
-+	msblk->devblksize = get_hardsect_size(dev);
-+	if(msblk->devblksize < BLOCK_SIZE)
-+		msblk->devblksize = BLOCK_SIZE;
-+	msblk->devblksize_log2 = ffz(~msblk->devblksize);
-+        set_blocksize(dev, msblk->devblksize);
-+	s->s_blocksize = msblk->devblksize;
-+	s->s_blocksize_bits = msblk->devblksize_log2;
-+	
-+	init_MUTEX(&msblk->read_data_mutex);
-+	init_MUTEX(&msblk->read_page_mutex);
-+	init_MUTEX(&msblk->block_cache_mutex);
-+	init_MUTEX(&msblk->fragment_mutex);
-+	
-+	init_waitqueue_head(&msblk->waitq);
-+	init_waitqueue_head(&msblk->fragment_wait_queue);
-+
-+	if (!squashfs_read_data(s, (char *) sblk, SQUASHFS_START,
-+					sizeof(struct squashfs_super_block) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
-+		SERROR("unable to read superblock\n");
-+		goto failed_mount;
-+	}
-+
-+	/* Check it is a SQUASHFS superblock */
-+	msblk->swap = 0;
-+	if ((s->s_magic = sblk->s_magic) != SQUASHFS_MAGIC) {
-+		if (sblk->s_magic == SQUASHFS_MAGIC_SWAP) {
-+			struct squashfs_super_block ssblk;
-+
-+			WARNING("Mounting a different endian SQUASHFS "
-+				"filesystem on %s\n", bdevname(dev));
-+
-+			SQUASHFS_SWAP_SUPER_BLOCK(&ssblk, sblk);
-+			memcpy(sblk, &ssblk, sizeof(struct squashfs_super_block));
-+			msblk->swap = 1;
-+		} else  {
-+			SERROR("Can't find a SQUASHFS superblock on %s\n",
-+							bdevname(dev));
-+			goto failed_mount;
-+		}
-+	}
-+
-+	/* Check the MAJOR & MINOR versions */
-+	if(!supported_squashfs_filesystem(msblk, silent))
-+		goto failed_mount;
-+
-+	TRACE("Found valid superblock on %s\n", bdevname(dev));
-+	TRACE("Inodes are %scompressed\n",
-+					SQUASHFS_UNCOMPRESSED_INODES
-+					(sblk->flags) ? "un" : "");
-+	TRACE("Data is %scompressed\n",
-+					SQUASHFS_UNCOMPRESSED_DATA(sblk->flags)
-+					? "un" : "");
-+	TRACE("Check data is %s present in the filesystem\n",
-+					SQUASHFS_CHECK_DATA(sblk->flags) ?
-+					"" : "not");
-+	TRACE("Filesystem size %lld bytes\n", sblk->bytes_used);
-+	TRACE("Block size %d\n", sblk->block_size);
-+	TRACE("Number of inodes %d\n", sblk->inodes);
-+	if (sblk->s_major > 1)
-+		TRACE("Number of fragments %d\n", sblk->fragments);
-+	TRACE("Number of uids %d\n", sblk->no_uids);
-+	TRACE("Number of gids %d\n", sblk->no_guids);
-+	TRACE("sblk->inode_table_start %llx\n", sblk->inode_table_start);
-+	TRACE("sblk->directory_table_start %llx\n", sblk->directory_table_start);
-+	if (sblk->s_major > 1)
-+		TRACE("sblk->fragment_table_start %llx\n",
-+					sblk->fragment_table_start);
-+	TRACE("sblk->uid_start %llx\n", sblk->uid_start);
-+
-+	s->s_flags |= MS_RDONLY;
-+	s->s_op = &squashfs_ops;
-+
-+	/* Init inode_table block pointer array */
-+	if (!(msblk->block_cache = kmalloc(sizeof(struct squashfs_cache) *
-+					SQUASHFS_CACHED_BLKS, GFP_KERNEL))) {
-+		ERROR("Failed to allocate block cache\n");
-+		goto failed_mount;
-+	}
-+
-+	for (i = 0; i < SQUASHFS_CACHED_BLKS; i++)
-+		msblk->block_cache[i].block = SQUASHFS_INVALID_BLK;
-+
-+	msblk->next_cache = 0;
-+
-+	/* Allocate read_data block */
-+	msblk->read_size = (sblk->block_size < SQUASHFS_METADATA_SIZE) ?
-+					SQUASHFS_METADATA_SIZE :
-+					sblk->block_size;
-+
-+	if (!(msblk->read_data = kmalloc(msblk->read_size, GFP_KERNEL))) {
-+		ERROR("Failed to allocate read_data block\n");
-+		goto failed_mount;
-+	}
-+
-+	/* Allocate read_page block */
-+	if (!(msblk->read_page = kmalloc(sblk->block_size, GFP_KERNEL))) {
-+		ERROR("Failed to allocate read_page block\n");
-+		goto failed_mount;
-+	}
-+
-+	/* Allocate uid and gid tables */
-+	if (!(msblk->uid = kmalloc((sblk->no_uids + sblk->no_guids) *
-+					sizeof(unsigned int), GFP_KERNEL))) {
-+		ERROR("Failed to allocate uid/gid table\n");
-+		goto failed_mount;
-+	}
-+	msblk->guid = msblk->uid + sblk->no_uids;
-+   
-+	if (msblk->swap) {
-+		unsigned int suid[sblk->no_uids + sblk->no_guids];
-+
-+		if (!squashfs_read_data(s, (char *) &suid, sblk->uid_start,
-+					((sblk->no_uids + sblk->no_guids) *
-+					 sizeof(unsigned int)) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
-+			ERROR("unable to read uid/gid table\n");
-+			goto failed_mount;
-+		}
-+
-+		SQUASHFS_SWAP_DATA(msblk->uid, suid, (sblk->no_uids +
-+			sblk->no_guids), (sizeof(unsigned int) * 8));
-+	} else
-+		if (!squashfs_read_data(s, (char *) msblk->uid, sblk->uid_start,
-+					((sblk->no_uids + sblk->no_guids) *
-+					 sizeof(unsigned int)) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
-+			ERROR("unable to read uid/gid table\n");
-+			goto failed_mount;
-+		}
-+
-+
-+	if (sblk->s_major == 1 && squashfs_1_0_supported(msblk))
-+		goto allocate_root;
-+
-+	if (!(msblk->fragment = kmalloc(sizeof(struct squashfs_fragment_cache) *
-+				SQUASHFS_CACHED_FRAGMENTS, GFP_KERNEL))) {
-+		ERROR("Failed to allocate fragment block cache\n");
-+		goto failed_mount;
-+	}
-+
-+	for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) {
-+		msblk->fragment[i].locked = 0;
-+		msblk->fragment[i].block = SQUASHFS_INVALID_BLK;
-+		msblk->fragment[i].data = NULL;
-+	}
-+
-+	msblk->next_fragment = 0;
-+
-+	/* Allocate fragment index table */
-+	if(msblk->read_fragment_index_table(s) == 0)
-+		goto failed_mount;
-+
-+allocate_root:
-+	if ((root = (msblk->iget)(s, sblk->root_inode)) == NULL)
-+		goto failed_mount;
-+
-+	if ((s->s_root = d_alloc_root(root)) == NULL) {
-+		ERROR("Root inode create failed\n");
-+		iput(root);
-+		goto failed_mount;
-+	}
-+
-+	TRACE("Leaving squashfs_read_super\n");
-+	return s;
-+
-+failed_mount:
-+	kfree(msblk->fragment_index);
-+	kfree(msblk->fragment);
-+	kfree(msblk->uid);
-+	kfree(msblk->read_page);
-+	kfree(msblk->read_data);
-+	kfree(msblk->block_cache);
-+	kfree(msblk->fragment_index_2);
-+	return NULL;
-+}
-+
-+
-+static int squashfs_statfs(struct super_block *s, struct statfs *buf)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	TRACE("Entered squashfs_statfs\n");
-+
-+	buf->f_type = SQUASHFS_MAGIC;
-+	buf->f_bsize = sblk->block_size;
-+	buf->f_blocks = ((sblk->bytes_used - 1) >> sblk->block_log) + 1;
-+	buf->f_bfree = buf->f_bavail = 0;
-+	buf->f_files = sblk->inodes;
-+	buf->f_ffree = 0;
-+	buf->f_namelen = SQUASHFS_NAME_LEN;
-+
-+	return 0;
-+}
-+
-+
-+static int squashfs_symlink_readpage(struct file *file, struct page *page)
-+{
-+	struct inode *inode = page->mapping->host;
-+	int index = page->index << PAGE_CACHE_SHIFT, length, bytes;
-+	long long block = SQUASHFS_I(inode)->start_block;
-+	int offset = SQUASHFS_I(inode)->offset;
-+	void *pageaddr = kmap(page);
-+
-+	TRACE("Entered squashfs_symlink_readpage, page index %ld, start block "
-+				"%llx, offset %x\n", page->index,
-+				SQUASHFS_I(inode)->start_block,
-+				SQUASHFS_I(inode)->offset);
-+
-+	for (length = 0; length < index; length += bytes) {
-+		if (!(bytes = squashfs_get_cached_block(inode->i_sb, NULL,
-+				block, offset, PAGE_CACHE_SIZE, &block,
-+				&offset))) {
-+			ERROR("Unable to read symbolic link [%llx:%x]\n", block,
-+					offset);
-+			goto skip_read;
-+		}
-+	}
-+
-+	if (length != index) {
-+		ERROR("(squashfs_symlink_readpage) length != index\n");
-+		bytes = 0;
-+		goto skip_read;
-+	}
-+
-+	bytes = (i_size_read(inode) - length) > PAGE_CACHE_SIZE ? PAGE_CACHE_SIZE :
-+					i_size_read(inode) - length;
-+
-+	if (!(bytes = squashfs_get_cached_block(inode->i_sb, pageaddr, block,
-+					offset, bytes, &block, &offset)))
-+		ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset);
-+
-+skip_read:
-+	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
-+	kunmap(page);
-+	SetPageUptodate(page);
-+	UnlockPage(page);
-+
-+	return 0;
-+}
-+
-+
-+struct meta_index *locate_meta_index(struct inode *inode, int index, int offset)
-+{
-+	struct meta_index *meta = NULL;
-+	struct squashfs_sb_info *msblk = &inode->i_sb->u.squashfs_sb;
-+	int i;
-+
-+	down(&msblk->meta_index_mutex);
-+
-+	TRACE("locate_meta_index: index %d, offset %d\n", index, offset);
-+
-+	if(msblk->meta_index == NULL)
-+		goto not_allocated;
-+
-+	for (i = 0; i < SQUASHFS_META_NUMBER; i ++)
-+		if (msblk->meta_index[i].inode_number == inode->i_ino &&
-+				msblk->meta_index[i].offset >= offset &&
-+				msblk->meta_index[i].offset <= index &&
-+				msblk->meta_index[i].locked == 0) {
-+			TRACE("locate_meta_index: entry %d, offset %d\n", i,
-+					msblk->meta_index[i].offset);
-+			meta = &msblk->meta_index[i];
-+			offset = meta->offset;
-+		}
-+
-+	if (meta)
-+		meta->locked = 1;
-+
-+not_allocated:
-+	up(&msblk->meta_index_mutex);
-+
-+	return meta;
-+}
-+
-+
-+struct meta_index *empty_meta_index(struct inode *inode, int offset, int skip)
-+{
-+	struct squashfs_sb_info *msblk = &inode->i_sb->u.squashfs_sb;
-+	struct meta_index *meta = NULL;
-+	int i;
-+
-+	down(&msblk->meta_index_mutex);
-+
-+	TRACE("empty_meta_index: offset %d, skip %d\n", offset, skip);
-+
-+	if(msblk->meta_index == NULL) {
-+		if (!(msblk->meta_index = kmalloc(sizeof(struct meta_index) *
-+					SQUASHFS_META_NUMBER, GFP_KERNEL))) {
-+			ERROR("Failed to allocate meta_index\n");
-+			goto failed;
-+		}
-+		for(i = 0; i < SQUASHFS_META_NUMBER; i++) {
-+			msblk->meta_index[i].inode_number = 0;
-+			msblk->meta_index[i].locked = 0;
-+		}
-+		msblk->next_meta_index = 0;
-+	}
-+
-+	for(i = SQUASHFS_META_NUMBER; i &&
-+			msblk->meta_index[msblk->next_meta_index].locked; i --)
-+		msblk->next_meta_index = (msblk->next_meta_index + 1) %
-+			SQUASHFS_META_NUMBER;
-+
-+	if(i == 0) {
-+		TRACE("empty_meta_index: failed!\n");
-+		goto failed;
-+	}
-+
-+	TRACE("empty_meta_index: returned meta entry %d, %p\n",
-+			msblk->next_meta_index,
-+			&msblk->meta_index[msblk->next_meta_index]);
-+
-+	meta = &msblk->meta_index[msblk->next_meta_index];
-+	msblk->next_meta_index = (msblk->next_meta_index + 1) %
-+			SQUASHFS_META_NUMBER;
-+
-+	meta->inode_number = inode->i_ino;
-+	meta->offset = offset;
-+	meta->skip = skip;
-+	meta->entries = 0;
-+	meta->locked = 1;
-+
-+failed:
-+	up(&msblk->meta_index_mutex);
-+	return meta;
-+}
-+
-+
-+void release_meta_index(struct inode *inode, struct meta_index *meta)
-+{
-+	meta->locked = 0;
-+}
-+
-+
-+static int read_block_index(struct super_block *s, int blocks, char *block_list,
-+		long long *start_block, int *offset)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	unsigned int *block_listp;
-+	int block = 0;
-+	
-+	if (msblk->swap) {
-+		char sblock_list[blocks << 2];
-+
-+		if (!squashfs_get_cached_block(s, sblock_list, *start_block,
-+				*offset, blocks << 2, start_block, offset)) {
-+			ERROR("Unable to read block list [%llx:%x]\n",
-+				*start_block, *offset);
-+			goto failure;
-+		}
-+		SQUASHFS_SWAP_INTS(((unsigned int *)block_list),
-+				((unsigned int *)sblock_list), blocks);
-+	} else
-+		if (!squashfs_get_cached_block(s, block_list, *start_block,
-+				*offset, blocks << 2, start_block, offset)) {
-+			ERROR("Unable to read block list [%llx:%x]\n",
-+				*start_block, *offset);
-+			goto failure;
-+		}
-+
-+	for (block_listp = (unsigned int *) block_list; blocks;
-+				block_listp++, blocks --)
-+		block += SQUASHFS_COMPRESSED_SIZE_BLOCK(*block_listp);
-+
-+	return block;
-+
-+failure:
-+	return -1;
-+}
-+
-+
-+#define SIZE 256
-+
-+static inline int calculate_skip(int blocks) {
-+	int skip = (blocks - 1) / ((SQUASHFS_SLOTS * SQUASHFS_META_ENTRIES + 1) * SQUASHFS_META_INDEXES);
-+	return skip >= 7 ? 7 : skip + 1;
-+}
-+
-+
-+static int get_meta_index(struct inode *inode, int index,
-+		long long *index_block, int *index_offset,
-+		long long *data_block, char *block_list)
-+{
-+	struct squashfs_sb_info *msblk = &inode->i_sb->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int skip = calculate_skip(i_size_read(inode) >> sblk->block_log);
-+	int offset = 0;
-+	struct meta_index *meta;
-+	struct meta_entry *meta_entry;
-+	long long cur_index_block = SQUASHFS_I(inode)->u.s1.block_list_start;
-+	int cur_offset = SQUASHFS_I(inode)->offset;
-+	long long cur_data_block = SQUASHFS_I(inode)->start_block;
-+	int i;
-+ 
-+	index /= SQUASHFS_META_INDEXES * skip;
-+
-+	while ( offset < index ) {
-+		meta = locate_meta_index(inode, index, offset + 1);
-+
-+		if (meta == NULL) {
-+			if ((meta = empty_meta_index(inode, offset + 1,
-+							skip)) == NULL)
-+				goto all_done;
-+		} else {
-+			offset = index < meta->offset + meta->entries ? index :
-+				meta->offset + meta->entries - 1;
-+			meta_entry = &meta->meta_entry[offset - meta->offset];
-+			cur_index_block = meta_entry->index_block + sblk->inode_table_start;
-+			cur_offset = meta_entry->offset;
-+			cur_data_block = meta_entry->data_block;
-+			TRACE("get_meta_index: offset %d, meta->offset %d, "
-+				"meta->entries %d\n", offset, meta->offset,
-+				meta->entries);
-+			TRACE("get_meta_index: index_block 0x%llx, offset 0x%x"
-+				" data_block 0x%llx\n", cur_index_block,
-+				cur_offset, cur_data_block);
-+		}
-+
-+		for (i = meta->offset + meta->entries; i <= index &&
-+				i < meta->offset + SQUASHFS_META_ENTRIES; i++) {
-+			int blocks = skip * SQUASHFS_META_INDEXES;
-+
-+			while (blocks) {
-+				int block = blocks > (SIZE >> 2) ? (SIZE >> 2) :
-+					blocks;
-+				int res = read_block_index(inode->i_sb, block,
-+					block_list, &cur_index_block,
-+					&cur_offset);
-+
-+				if (res == -1)
-+					goto failed;
-+
-+				cur_data_block += res;
-+				blocks -= block;
-+			}
-+
-+			meta_entry = &meta->meta_entry[i - meta->offset];
-+			meta_entry->index_block = cur_index_block - sblk->inode_table_start;
-+			meta_entry->offset = cur_offset;
-+			meta_entry->data_block = cur_data_block;
-+			meta->entries ++;
-+			offset ++;
-+		}
-+
-+		TRACE("get_meta_index: meta->offset %d, meta->entries %d\n",
-+				meta->offset, meta->entries);
-+
-+		release_meta_index(inode, meta);
-+	}
-+
-+all_done:
-+	*index_block = cur_index_block;
-+	*index_offset = cur_offset;
-+	*data_block = cur_data_block;
-+
-+	return offset * SQUASHFS_META_INDEXES * skip;
-+
-+failed:
-+	release_meta_index(inode, meta);
-+	return -1;
-+}
-+
-+
-+static long long read_blocklist(struct inode *inode, int index,
-+				int readahead_blks, char *block_list,
-+				unsigned short **block_p, unsigned int *bsize)
-+{
-+	long long block_ptr;
-+	int offset;
-+	long long block;
-+	int res = get_meta_index(inode, index, &block_ptr, &offset, &block,
-+		block_list);
-+
-+	TRACE("read_blocklist: res %d, index %d, block_ptr 0x%llx, offset"
-+		       " 0x%x, block 0x%llx\n", res, index, block_ptr, offset,
-+		       block);
-+
-+	if(res == -1)
-+		goto failure;
-+
-+	index -= res;
-+
-+	while ( index ) {
-+		int blocks = index > (SIZE >> 2) ? (SIZE >> 2) : index;
-+		int res = read_block_index(inode->i_sb, blocks, block_list,
-+			&block_ptr, &offset);
-+		if (res == -1)
-+			goto failure;
-+		block += res;
-+		index -= blocks;
-+	}
-+
-+	if (read_block_index(inode->i_sb, 1, block_list,
-+			&block_ptr, &offset) == -1)
-+		goto failure;
-+	*bsize = *((unsigned int *) block_list);
-+
-+	return block;
-+
-+failure:
-+	return 0;
-+}
-+
-+
-+static int squashfs_readpage(struct file *file, struct page *page)
-+{
-+	struct inode *inode = page->mapping->host;
-+	struct squashfs_sb_info *msblk = &inode->i_sb->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	unsigned char block_list[SIZE];
-+	long long block;
-+	unsigned int bsize, i = 0, bytes = 0, byte_offset = 0;
-+	int index = page->index >> (sblk->block_log - PAGE_CACHE_SHIFT);
-+ 	void *pageaddr;
-+	struct squashfs_fragment_cache *fragment = NULL;
-+	char *data_ptr = msblk->read_page;
-+	
-+	int mask = (1 << (sblk->block_log - PAGE_CACHE_SHIFT)) - 1;
-+	int start_index = page->index & ~mask;
-+	int end_index = start_index | mask;
-+
-+	TRACE("Entered squashfs_readpage, page index %lx, start block %llx\n",
-+					page->index,
-+					SQUASHFS_I(inode)->start_block);
-+
-+	if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
-+					PAGE_CACHE_SHIFT))
-+		goto skip_read;
-+
-+	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
-+					|| index < (i_size_read(inode) >>
-+					sblk->block_log)) {
-+		if ((block = (msblk->read_blocklist)(inode, index, 1,
-+					block_list, NULL, &bsize)) == 0)
-+			goto skip_read;
-+
-+		down(&msblk->read_page_mutex);
-+		
-+		if (!(bytes = squashfs_read_data(inode->i_sb, msblk->read_page,
-+					block, bsize, NULL))) {
-+			ERROR("Unable to read page, block %llx, size %x\n", block,
-+					bsize);
-+			up(&msblk->read_page_mutex);
-+			goto skip_read;
-+		}
-+	} else {
-+		if ((fragment = get_cached_fragment(inode->i_sb,
-+					SQUASHFS_I(inode)->
-+					u.s1.fragment_start_block,
-+					SQUASHFS_I(inode)->u.s1.fragment_size))
-+					== NULL) {
-+			ERROR("Unable to read page, block %llx, size %x\n",
-+					SQUASHFS_I(inode)->
-+					u.s1.fragment_start_block,
-+					(int) SQUASHFS_I(inode)->
-+					u.s1.fragment_size);
-+			goto skip_read;
-+		}
-+		bytes = SQUASHFS_I(inode)->u.s1.fragment_offset +
-+					(i_size_read(inode) & (sblk->block_size
-+					- 1));
-+		byte_offset = SQUASHFS_I(inode)->u.s1.fragment_offset;
-+		data_ptr = fragment->data;
-+	}
-+
-+	for (i = start_index; i <= end_index && byte_offset < bytes;
-+					i++, byte_offset += PAGE_CACHE_SIZE) {
-+		struct page *push_page;
-+		int available_bytes = (bytes - byte_offset) > PAGE_CACHE_SIZE ?
-+					PAGE_CACHE_SIZE : bytes - byte_offset;
-+
-+		TRACE("bytes %d, i %d, byte_offset %d, available_bytes %d\n",
-+					bytes, i, byte_offset, available_bytes);
-+
-+		if (i == page->index)  {
-+			pageaddr = kmap_atomic(page, KM_USER0);
-+			memcpy(pageaddr, data_ptr + byte_offset,
-+					available_bytes);
-+			memset(pageaddr + available_bytes, 0,
-+					PAGE_CACHE_SIZE - available_bytes);
-+			kunmap_atomic(pageaddr, KM_USER0);
-+			flush_dcache_page(page);
-+			SetPageUptodate(page);
-+			UnlockPage(page);
-+		} else if ((push_page =
-+				grab_cache_page_nowait(page->mapping, i))) {
-+ 			pageaddr = kmap_atomic(push_page, KM_USER0);
-+
-+			memcpy(pageaddr, data_ptr + byte_offset,
-+					available_bytes);
-+			memset(pageaddr + available_bytes, 0,
-+					PAGE_CACHE_SIZE - available_bytes);
-+			kunmap_atomic(pageaddr, KM_USER0);
-+			flush_dcache_page(push_page);
-+			SetPageUptodate(push_page);
-+			UnlockPage(push_page);
-+			page_cache_release(push_page);
-+		}
-+	}
-+
-+	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
-+					|| index < (i_size_read(inode) >>
-+					sblk->block_log))
-+		up(&msblk->read_page_mutex);
-+	else
-+		release_cached_fragment(msblk, fragment);
-+
-+	return 0;
-+
-+skip_read:
-+	pageaddr = kmap_atomic(page, KM_USER0);
-+	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
-+	kunmap_atomic(pageaddr, KM_USER0);
-+	flush_dcache_page(page);
-+	SetPageUptodate(page);
-+	UnlockPage(page);
-+
-+	return 0;
-+}
-+
-+
-+static int squashfs_readpage4K(struct file *file, struct page *page)
-+{
-+	struct inode *inode = page->mapping->host;
-+	struct squashfs_sb_info *msblk = &inode->i_sb->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	unsigned char block_list[SIZE];
-+	long long block;
-+	unsigned int bsize, bytes = 0;
-+ 	void *pageaddr;
-+	
-+	TRACE("Entered squashfs_readpage4K, page index %lx, start block %llx\n",
-+					page->index,
-+					SQUASHFS_I(inode)->start_block);
-+
-+	if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
-+					PAGE_CACHE_SHIFT)) {
-+		pageaddr = kmap_atomic(page, KM_USER0);
-+		goto skip_read;
-+	}
-+
-+	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
-+					|| page->index < (i_size_read(inode) >>
-+					sblk->block_log)) {
-+		block = (msblk->read_blocklist)(inode, page->index, 1,
-+					block_list, NULL, &bsize);
-+
-+		down(&msblk->read_page_mutex);
-+		bytes = squashfs_read_data(inode->i_sb, msblk->read_page, block,
-+					bsize, NULL);
-+		pageaddr = kmap_atomic(page, KM_USER0);
-+		if (bytes)
-+			memcpy(pageaddr, msblk->read_page, bytes);
-+		else
-+			ERROR("Unable to read page, block %llx, size %x\n",
-+					block, bsize);
-+		up(&msblk->read_page_mutex);
-+	} else {
-+		struct squashfs_fragment_cache *fragment =
-+			get_cached_fragment(inode->i_sb,
-+					SQUASHFS_I(inode)->
-+					u.s1.fragment_start_block,
-+					SQUASHFS_I(inode)-> u.s1.fragment_size);
-+		pageaddr = kmap_atomic(page, KM_USER0);
-+		if (fragment) {
-+			bytes = i_size_read(inode) & (sblk->block_size - 1);
-+			memcpy(pageaddr, fragment->data + SQUASHFS_I(inode)->
-+					u.s1.fragment_offset, bytes);
-+			release_cached_fragment(msblk, fragment);
-+		} else
-+			ERROR("Unable to read page, block %llx, size %x\n",
-+					SQUASHFS_I(inode)->
-+					u.s1.fragment_start_block, (int)
-+					SQUASHFS_I(inode)-> u.s1.fragment_size);
-+	}
-+
-+skip_read:
-+	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
-+	kunmap_atomic(pageaddr, KM_USER0);
-+	flush_dcache_page(page);
-+	SetPageUptodate(page);
-+	UnlockPage(page);
-+
-+	return 0;
-+}
-+
-+
-+static int get_dir_index_using_offset(struct super_block *s, long long 
-+				*next_block, unsigned int *next_offset,
-+				long long index_start,
-+				unsigned int index_offset, int i_count,
-+				long long f_pos)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i, length = 0;
-+	struct squashfs_dir_index index;
-+
-+	TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n",
-+					i_count, (unsigned int) f_pos);
-+
-+	f_pos -= 3;
-+	if (f_pos == 0)
-+		goto finish;
-+
-+	for (i = 0; i < i_count; i++) {
-+		if (msblk->swap) {
-+			struct squashfs_dir_index sindex;
-+			squashfs_get_cached_block(s, (char *) &sindex,
-+					index_start, index_offset,
-+					sizeof(sindex), &index_start,
-+					&index_offset);
-+			SQUASHFS_SWAP_DIR_INDEX(&index, &sindex);
-+		} else
-+			squashfs_get_cached_block(s, (char *) &index,
-+					index_start, index_offset,
-+					sizeof(index), &index_start,
-+					&index_offset);
-+
-+		if (index.index > f_pos)
-+			break;
-+
-+		squashfs_get_cached_block(s, NULL, index_start, index_offset,
-+					index.size + 1, &index_start,
-+					&index_offset);
-+
-+		length = index.index;
-+		*next_block = index.start_block + sblk->directory_table_start;
-+	}
-+
-+	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
-+
-+finish:
-+	return length + 3;
-+}
-+
-+
-+static int get_dir_index_using_name(struct super_block *s, long long
-+				*next_block, unsigned int *next_offset,
-+				long long index_start,
-+				unsigned int index_offset, int i_count,
-+				const char *name, int size)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i, length = 0;
-+	char buffer[sizeof(struct squashfs_dir_index) + SQUASHFS_NAME_LEN + 1];
-+	struct squashfs_dir_index *index = (struct squashfs_dir_index *) buffer;
-+	char str[SQUASHFS_NAME_LEN + 1];
-+
-+	TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count);
-+
-+	strncpy(str, name, size);
-+	str[size] = '\0';
-+
-+	for (i = 0; i < i_count; i++) {
-+		if (msblk->swap) {
-+			struct squashfs_dir_index sindex;
-+			squashfs_get_cached_block(s, (char *) &sindex,
-+					index_start, index_offset,
-+					sizeof(sindex), &index_start,
-+					&index_offset);
-+			SQUASHFS_SWAP_DIR_INDEX(index, &sindex);
-+		} else
-+			squashfs_get_cached_block(s, (char *) index,
-+					index_start, index_offset,
-+					sizeof(struct squashfs_dir_index),
-+					&index_start, &index_offset);
-+
-+		squashfs_get_cached_block(s, index->name, index_start,
-+					index_offset, index->size + 1,
-+					&index_start, &index_offset);
-+
-+		index->name[index->size + 1] = '\0';
-+
-+		if (strcmp(index->name, str) > 0)
-+			break;
-+
-+		length = index->index;
-+		*next_block = index->start_block + sblk->directory_table_start;
-+	}
-+
-+	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
-+	return length + 3;
-+}
-+
-+		
-+static int squashfs_readdir(struct file *file, void *dirent, filldir_t filldir)
-+{
-+	struct inode *i = file->f_dentry->d_inode;
-+	struct squashfs_sb_info *msblk = &i->i_sb->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long next_block = SQUASHFS_I(i)->start_block +
-+		sblk->directory_table_start;
-+	int next_offset = SQUASHFS_I(i)->offset, length = 0, dirs_read = 0,
-+		dir_count;
-+	struct squashfs_dir_header dirh;
-+	char buffer[sizeof(struct squashfs_dir_entry) + SQUASHFS_NAME_LEN + 1];
-+	struct squashfs_dir_entry *dire = (struct squashfs_dir_entry *) buffer;
-+
-+	TRACE("Entered squashfs_readdir [%llx:%x]\n", next_block, next_offset);
-+
-+	while(file->f_pos < 3) {
-+		char *name;
-+		int size, i_ino;
-+
-+		if(file->f_pos == 0) {
-+			name = ".";
-+			size = 1;
-+			i_ino = i->i_ino;
-+		} else {
-+			name = "..";
-+			size = 2;
-+			i_ino = SQUASHFS_I(i)->u.s2.parent_inode;
-+		}
-+		TRACE("Calling filldir(%x, %s, %d, %d, %d, %d)\n",
-+				(unsigned int) dirent, name, size, (int)
-+				file->f_pos, i_ino,
-+				squashfs_filetype_table[1]);
-+
-+		if (filldir(dirent, name, size,
-+				file->f_pos, i_ino,
-+				squashfs_filetype_table[1]) < 0) {
-+				TRACE("Filldir returned less than 0\n");
-+				goto finish;
-+		}
-+		file->f_pos += size;
-+		dirs_read++;
-+	}
-+
-+	length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_start,
-+				SQUASHFS_I(i)->u.s2.directory_index_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_count,
-+				file->f_pos);
-+
-+	while (length < i_size_read(i)) {
-+		/* read directory header */
-+		if (msblk->swap) {
-+			struct squashfs_dir_header sdirh;
-+			
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
-+					next_block, next_offset, sizeof(sdirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(sdirh);
-+			SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh);
-+		} else {
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
-+					next_block, next_offset, sizeof(dirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(dirh);
-+		}
-+
-+		dir_count = dirh.count + 1;
-+		while (dir_count--) {
-+			if (msblk->swap) {
-+				struct squashfs_dir_entry sdire;
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						&sdire, next_block, next_offset,
-+						sizeof(sdire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				
-+				length += sizeof(sdire);
-+				SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire);
-+			} else {
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						dire, next_block, next_offset,
-+						sizeof(*dire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+				length += sizeof(*dire);
-+			}
-+
-+			if (!squashfs_get_cached_block(i->i_sb, dire->name,
-+						next_block, next_offset,
-+						dire->size + 1, &next_block,
-+						&next_offset))
-+				goto failed_read;
-+
-+			length += dire->size + 1;
-+
-+			if (file->f_pos >= length)
-+				continue;
-+
-+			dire->name[dire->size + 1] = '\0';
-+
-+			TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d, %d)\n",
-+					(unsigned int) dirent, dire->name,
-+					dire->size + 1, (int) file->f_pos,
-+					dirh.start_block, dire->offset,
-+					dirh.inode_number + dire->inode_number,
-+					squashfs_filetype_table[dire->type]);
-+
-+			if (filldir(dirent, dire->name, dire->size + 1,
-+					file->f_pos,
-+					dirh.inode_number + dire->inode_number,
-+					squashfs_filetype_table[dire->type])
-+					< 0) {
-+				TRACE("Filldir returned less than 0\n");
-+				goto finish;
-+			}
-+			file->f_pos = length;
-+			dirs_read++;
-+		}
-+	}
-+
-+finish:
-+	return dirs_read;
-+
-+failed_read:
-+	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
-+		next_offset);
-+	return 0;
-+}
-+
-+
-+static struct dentry *squashfs_lookup(struct inode *i, struct dentry *dentry)
-+{
-+	const unsigned char *name = dentry->d_name.name;
-+	int len = dentry->d_name.len;
-+	struct inode *inode = NULL;
-+	struct squashfs_sb_info *msblk = &i->i_sb->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long next_block = SQUASHFS_I(i)->start_block +
-+				sblk->directory_table_start;
-+	int next_offset = SQUASHFS_I(i)->offset, length = 0,
-+				dir_count;
-+	struct squashfs_dir_header dirh;
-+	char buffer[sizeof(struct squashfs_dir_entry) + SQUASHFS_NAME_LEN];
-+	struct squashfs_dir_entry *dire = (struct squashfs_dir_entry *) buffer;
-+
-+	TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset);
-+
-+	if (len > SQUASHFS_NAME_LEN)
-+		goto exit_loop;
-+
-+	length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_start,
-+				SQUASHFS_I(i)->u.s2.directory_index_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_count, name,
-+				len);
-+
-+	while (length < i_size_read(i)) {
-+		/* read directory header */
-+		if (msblk->swap) {
-+			struct squashfs_dir_header sdirh;
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
-+					next_block, next_offset, sizeof(sdirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(sdirh);
-+			SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh);
-+		} else {
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
-+					next_block, next_offset, sizeof(dirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(dirh);
-+		}
-+
-+		dir_count = dirh.count + 1;
-+		while (dir_count--) {
-+			if (msblk->swap) {
-+				struct squashfs_dir_entry sdire;
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						&sdire, next_block,next_offset,
-+						sizeof(sdire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				
-+				length += sizeof(sdire);
-+				SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire);
-+			} else {
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						dire, next_block,next_offset,
-+						sizeof(*dire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+				length += sizeof(*dire);
-+			}
-+
-+			if (!squashfs_get_cached_block(i->i_sb, dire->name,
-+					next_block, next_offset, dire->size + 1,
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += dire->size + 1;
-+
-+			if (name[0] < dire->name[0])
-+				goto exit_loop;
-+
-+			if ((len == dire->size + 1) && !strncmp(name,
-+						dire->name, len)) {
-+				squashfs_inode_t ino =
-+					SQUASHFS_MKINODE(dirh.start_block,
-+					dire->offset);
-+
-+				TRACE("calling squashfs_iget for directory "
-+					"entry %s, inode %x:%x, %d\n", name,
-+					dirh.start_block, dire->offset,
-+					dirh.inode_number + dire->inode_number);
-+
-+				inode = (msblk->iget)(i->i_sb, ino);
-+
-+				goto exit_loop;
-+			}
-+		}
-+	}
-+
-+exit_loop:
-+	d_add(dentry, inode);
-+	return ERR_PTR(0);
-+
-+failed_read:
-+	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
-+		next_offset);
-+	goto exit_loop;
-+}
-+
-+
-+static void squashfs_put_super(struct super_block *s)
-+{
-+	int i;
-+
-+		struct squashfs_sb_info *sbi = &s->u.squashfs_sb;
-+		if (sbi->block_cache)
-+			for (i = 0; i < SQUASHFS_CACHED_BLKS; i++)
-+				if (sbi->block_cache[i].block !=
-+							SQUASHFS_INVALID_BLK)
-+					kfree(sbi->block_cache[i].data);
-+		if (sbi->fragment)
-+			for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) 
-+				SQUASHFS_FREE(sbi->fragment[i].data);
-+		kfree(sbi->fragment);
-+		kfree(sbi->block_cache);
-+		kfree(sbi->read_data);
-+		kfree(sbi->read_page);
-+		kfree(sbi->uid);
-+		kfree(sbi->fragment_index);
-+		kfree(sbi->fragment_index_2);
-+		sbi->block_cache = NULL;
-+		sbi->uid = NULL;
-+		sbi->read_data = NULL;
-+		sbi->read_page = NULL;
-+		sbi->fragment = NULL;
-+		sbi->fragment_index = NULL;
-+		sbi->fragment_index_2 = NULL;
-+}
-+
-+
-+static int __init init_squashfs_fs(void)
-+{
-+
-+	printk(KERN_INFO "squashfs: version 3.0 (2006/03/15) "
-+		"Phillip Lougher\n");
-+
-+	if (!(stream.workspace = vmalloc(zlib_inflate_workspacesize()))) {
-+		ERROR("Failed to allocate zlib workspace\n");
-+		return -ENOMEM;
-+	}
-+	return register_filesystem(&squashfs_fs_type);
-+}
-+
-+
-+static void __exit exit_squashfs_fs(void)
-+{
-+	vfree(stream.workspace);
-+	unregister_filesystem(&squashfs_fs_type);
-+}
-+
-+
-+EXPORT_NO_SYMBOLS;
-+
-+module_init(init_squashfs_fs);
-+module_exit(exit_squashfs_fs);
-+MODULE_DESCRIPTION("squashfs, a compressed read-only filesystem");
-+MODULE_AUTHOR("Phillip Lougher <phillip@lougher.org.uk>");
-+MODULE_LICENSE("GPL");
-diff --new-file -urp linux-2.4.32/fs/squashfs/Makefile linux-2.4.32-squashfs3.0/fs/squashfs/Makefile
---- linux-2.4.32/fs/squashfs/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-squashfs3.0/fs/squashfs/Makefile	2006-03-07 21:12:36.000000000 +0000
-@@ -0,0 +1,11 @@
-+#
-+# Makefile for the linux squashfs routines.
-+#
-+
-+O_TARGET := squashfs.o
-+
-+obj-y  := inode.o squashfs2_0.o
-+
-+obj-m := $(O_TARGET)
-+
-+include $(TOPDIR)/Rules.make
-diff --new-file -urp linux-2.4.32/fs/squashfs/squashfs2_0.c linux-2.4.32-squashfs3.0/fs/squashfs/squashfs2_0.c
---- linux-2.4.32/fs/squashfs/squashfs2_0.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-squashfs3.0/fs/squashfs/squashfs2_0.c	2006-03-07 21:12:36.000000000 +0000
-@@ -0,0 +1,751 @@
-+/*
-+ * Squashfs - a compressed read only filesystem for Linux
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006
-+ * Phillip Lougher <phillip@lougher.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs2_0.c
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/squashfs_fs.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/fs.h>
-+#include <linux/smp_lock.h>
-+#include <linux/locks.h>
-+#include <linux/init.h>
-+#include <linux/dcache.h>
-+#include <linux/wait.h>
-+#include <linux/zlib.h>
-+#include <linux/blkdev.h>
-+#include <linux/vmalloc.h>
-+#include <asm/uaccess.h>
-+#include <asm/semaphore.h>
-+#include "squashfs.h"
-+
-+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir);
-+static struct dentry *squashfs_lookup_2(struct inode *i, struct dentry *dentry);
-+
-+static struct file_operations squashfs_dir_ops_2 = {
-+	.read = generic_read_dir,
-+	.readdir = squashfs_readdir_2
-+};
-+
-+static struct inode_operations squashfs_dir_inode_ops_2 = {
-+	.lookup = squashfs_lookup_2
-+};
-+
-+static unsigned char squashfs_filetype_table[] = {
-+	DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK
-+};
-+
-+static int read_fragment_index_table_2(struct super_block *s)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	if (!(msblk->fragment_index_2 = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES_2
-+					(sblk->fragments), GFP_KERNEL))) {
-+		ERROR("Failed to allocate uid/gid table\n");
-+		return 0;
-+	}
-+   
-+	if (SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments) &&
-+					!squashfs_read_data(s, (char *)
-+					msblk->fragment_index_2,
-+					sblk->fragment_table_start,
-+					SQUASHFS_FRAGMENT_INDEX_BYTES_2
-+					(sblk->fragments) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
-+		ERROR("unable to read fragment index table\n");
-+		return 0;
-+	}
-+
-+	if (msblk->swap) {
-+		int i;
-+		unsigned int fragment;
-+
-+		for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES_2(sblk->fragments);
-+									i++) {
-+			SQUASHFS_SWAP_FRAGMENT_INDEXES_2((&fragment),
-+						&msblk->fragment_index_2[i], 1);
-+			msblk->fragment_index_2[i] = fragment;
-+		}
-+	}
-+
-+	return 1;
-+}
-+
-+
-+static int get_fragment_location_2(struct super_block *s, unsigned int fragment,
-+				long long *fragment_start_block,
-+				unsigned int *fragment_size)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	long long start_block =
-+		msblk->fragment_index_2[SQUASHFS_FRAGMENT_INDEX_2(fragment)];
-+	int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET_2(fragment);
-+	struct squashfs_fragment_entry_2 fragment_entry;
-+
-+	if (msblk->swap) {
-+		struct squashfs_fragment_entry_2 sfragment_entry;
-+
-+		if (!squashfs_get_cached_block(s, (char *) &sfragment_entry,
-+					start_block, offset,
-+					sizeof(sfragment_entry), &start_block,
-+					&offset))
-+			goto out;
-+		SQUASHFS_SWAP_FRAGMENT_ENTRY_2(&fragment_entry, &sfragment_entry);
-+	} else
-+		if (!squashfs_get_cached_block(s, (char *) &fragment_entry,
-+					start_block, offset,
-+					sizeof(fragment_entry), &start_block,
-+					&offset))
-+			goto out;
-+
-+	*fragment_start_block = fragment_entry.start_block;
-+	*fragment_size = fragment_entry.size;
-+
-+	return 1;
-+
-+out:
-+	return 0;
-+}
-+
-+
-+static struct inode *squashfs_new_inode(struct super_block *s,
-+		struct squashfs_base_inode_header_2 *inodeb, unsigned int ino)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	struct inode *i = new_inode(s);
-+
-+	if (i) {
-+		i->i_ino = ino;
-+		i->i_mtime = sblk->mkfs_time;
-+		i->i_atime = sblk->mkfs_time;
-+		i->i_ctime = sblk->mkfs_time;
-+		i->i_uid = msblk->uid[inodeb->uid];
-+		i->i_mode = inodeb->mode;
-+		i->i_nlink = 1;
-+		i->i_size = 0;
-+		if (inodeb->guid == SQUASHFS_GUIDS)
-+			i->i_gid = i->i_uid;
-+		else
-+			i->i_gid = msblk->guid[inodeb->guid];
-+	}
-+
-+	return i;
-+}
-+
-+
-+static struct inode *squashfs_iget_2(struct super_block *s, squashfs_inode_t inode)
-+{
-+	struct inode *i;
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	unsigned int block = SQUASHFS_INODE_BLK(inode) +
-+		sblk->inode_table_start;
-+	unsigned int offset = SQUASHFS_INODE_OFFSET(inode);
-+	unsigned int ino = SQUASHFS_MK_VFS_INODE(block
-+		- sblk->inode_table_start, offset);
-+	long long next_block;
-+	unsigned int next_offset;
-+	union squashfs_inode_header_2 id, sid;
-+	struct squashfs_base_inode_header_2 *inodeb = &id.base,
-+					  *sinodeb = &sid.base;
-+
-+	TRACE("Entered squashfs_iget\n");
-+
-+	if (msblk->swap) {
-+		if (!squashfs_get_cached_block(s, (char *) sinodeb, block,
-+					offset, sizeof(*sinodeb), &next_block,
-+					&next_offset))
-+			goto failed_read;
-+		SQUASHFS_SWAP_BASE_INODE_HEADER_2(inodeb, sinodeb,
-+					sizeof(*sinodeb));
-+	} else
-+		if (!squashfs_get_cached_block(s, (char *) inodeb, block,
-+					offset, sizeof(*inodeb), &next_block,
-+					&next_offset))
-+			goto failed_read;
-+
-+	switch(inodeb->inode_type) {
-+		case SQUASHFS_FILE_TYPE: {
-+			struct squashfs_reg_inode_header_2 *inodep = &id.reg;
-+			struct squashfs_reg_inode_header_2 *sinodep = &sid.reg;
-+			long long frag_blk;
-+			unsigned int frag_size;
-+				
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_REG_INODE_HEADER_2(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			frag_blk = SQUASHFS_INVALID_BLK;
-+			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
-+					!get_fragment_location_2(s,
-+					inodep->fragment, &frag_blk, &frag_size))
-+				goto failed_read;
-+				
-+			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_size = inodep->file_size;
-+			i->i_fop = &generic_ro_fops;
-+			i->i_mode |= S_IFREG;
-+			i->i_mtime = inodep->mtime;
-+			i->i_atime = inodep->mtime;
-+			i->i_ctime = inodep->mtime;
-+			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
-+			i->i_blksize = PAGE_CACHE_SIZE;
-+			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
-+			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
-+			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+			if (sblk->block_size > 4096)
-+				i->i_data.a_ops = &squashfs_aops;
-+			else
-+				i->i_data.a_ops = &squashfs_aops_4K;
-+
-+			TRACE("File inode %x:%x, start_block %x, "
-+					"block_list_start %llx, offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, next_block,
-+					next_offset);
-+			break;
-+		}
-+		case SQUASHFS_DIR_TYPE: {
-+			struct squashfs_dir_inode_header_2 *inodep = &id.dir;
-+			struct squashfs_dir_inode_header_2 *sinodep = &sid.dir;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_DIR_INODE_HEADER_2(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_size = inodep->file_size;
-+			i->i_op = &squashfs_dir_inode_ops_2;
-+			i->i_fop = &squashfs_dir_ops_2;
-+			i->i_mode |= S_IFDIR;
-+			i->i_mtime = inodep->mtime;
-+			i->i_atime = inodep->mtime;
-+			i->i_ctime = inodep->mtime;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->offset = inodep->offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_count = 0;
-+			SQUASHFS_I(i)->u.s2.parent_inode = 0;
-+
-+			TRACE("Directory inode %x:%x, start_block %x, offset "
-+					"%x\n", SQUASHFS_INODE_BLK(inode),
-+					offset, inodep->start_block,
-+					inodep->offset);
-+			break;
-+		}
-+		case SQUASHFS_LDIR_TYPE: {
-+			struct squashfs_ldir_inode_header_2 *inodep = &id.ldir;
-+			struct squashfs_ldir_inode_header_2 *sinodep = &sid.ldir;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_LDIR_INODE_HEADER_2(inodep,
-+						sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_size = inodep->file_size;
-+			i->i_op = &squashfs_dir_inode_ops_2;
-+			i->i_fop = &squashfs_dir_ops_2;
-+			i->i_mode |= S_IFDIR;
-+			i->i_mtime = inodep->mtime;
-+			i->i_atime = inodep->mtime;
-+			i->i_ctime = inodep->mtime;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->offset = inodep->offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_start = next_block;
-+			SQUASHFS_I(i)->u.s2.directory_index_offset =
-+								next_offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_count =
-+								inodep->i_count;
-+			SQUASHFS_I(i)->u.s2.parent_inode = 0;
-+
-+			TRACE("Long directory inode %x:%x, start_block %x, "
-+					"offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, inodep->offset);
-+			break;
-+		}
-+		case SQUASHFS_SYMLINK_TYPE: {
-+			struct squashfs_symlink_inode_header_2 *inodep =
-+								&id.symlink;
-+			struct squashfs_symlink_inode_header_2 *sinodep =
-+								&sid.symlink;
-+	
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(inodep,
-+								sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_size = inodep->symlink_size;
-+			i->i_op = &page_symlink_inode_operations;
-+			i->i_data.a_ops = &squashfs_symlink_aops;
-+			i->i_mode |= S_IFLNK;
-+			SQUASHFS_I(i)->start_block = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+
-+			TRACE("Symbolic link inode %x:%x, start_block %llx, "
-+					"offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					next_block, next_offset);
-+			break;
-+		 }
-+		 case SQUASHFS_BLKDEV_TYPE:
-+		 case SQUASHFS_CHRDEV_TYPE: {
-+			struct squashfs_dev_inode_header_2 *inodep = &id.dev;
-+			struct squashfs_dev_inode_header_2 *sinodep = &sid.dev;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_DEV_INODE_HEADER_2(inodep, sinodep);
-+			} else	
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if ((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_mode |= (inodeb->inode_type ==
-+					SQUASHFS_CHRDEV_TYPE) ?  S_IFCHR :
-+					S_IFBLK;
-+			init_special_inode(i, i->i_mode, inodep->rdev);
-+
-+			TRACE("Device inode %x:%x, rdev %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->rdev);
-+			break;
-+		 }
-+		 case SQUASHFS_FIFO_TYPE:
-+		 case SQUASHFS_SOCKET_TYPE: {
-+			if ((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE)
-+							? S_IFIFO : S_IFSOCK;
-+			init_special_inode(i, i->i_mode, 0);
-+			break;
-+		 }
-+		 default:
-+			ERROR("Unknown inode type %d in squashfs_iget!\n",
-+					inodeb->inode_type);
-+			goto failed_read1;
-+	}
-+	
-+	insert_inode_hash(i);
-+	return i;
-+
-+failed_read:
-+	ERROR("Unable to read inode [%x:%x]\n", block, offset);
-+
-+failed_read1:
-+	return NULL;
-+}
-+
-+
-+static int get_dir_index_using_offset(struct super_block *s, long long 
-+				*next_block, unsigned int *next_offset,
-+				long long index_start,
-+				unsigned int index_offset, int i_count,
-+				long long f_pos)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i, length = 0;
-+	struct squashfs_dir_index_2 index;
-+
-+	TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n",
-+					i_count, (unsigned int) f_pos);
-+
-+	if (f_pos == 0)
-+		goto finish;
-+
-+	for (i = 0; i < i_count; i++) {
-+		if (msblk->swap) {
-+			struct squashfs_dir_index_2 sindex;
-+			squashfs_get_cached_block(s, (char *) &sindex,
-+					index_start, index_offset,
-+					sizeof(sindex), &index_start,
-+					&index_offset);
-+			SQUASHFS_SWAP_DIR_INDEX_2(&index, &sindex);
-+		} else
-+			squashfs_get_cached_block(s, (char *) &index,
-+					index_start, index_offset,
-+					sizeof(index), &index_start,
-+					&index_offset);
-+
-+		if (index.index > f_pos)
-+			break;
-+
-+		squashfs_get_cached_block(s, NULL, index_start, index_offset,
-+					index.size + 1, &index_start,
-+					&index_offset);
-+
-+		length = index.index;
-+		*next_block = index.start_block + sblk->directory_table_start;
-+	}
-+
-+	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
-+
-+finish:
-+	return length;
-+}
-+
-+
-+static int get_dir_index_using_name(struct super_block *s, long long
-+				*next_block, unsigned int *next_offset,
-+				long long index_start,
-+				unsigned int index_offset, int i_count,
-+				const char *name, int size)
-+{
-+	struct squashfs_sb_info *msblk = &s->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i, length = 0;
-+	char buffer[sizeof(struct squashfs_dir_index_2) + SQUASHFS_NAME_LEN + 1];
-+	struct squashfs_dir_index_2 *index = (struct squashfs_dir_index_2 *) buffer;
-+	char str[SQUASHFS_NAME_LEN + 1];
-+
-+	TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count);
-+
-+	strncpy(str, name, size);
-+	str[size] = '\0';
-+
-+	for (i = 0; i < i_count; i++) {
-+		if (msblk->swap) {
-+			struct squashfs_dir_index_2 sindex;
-+			squashfs_get_cached_block(s, (char *) &sindex,
-+					index_start, index_offset,
-+					sizeof(sindex), &index_start,
-+					&index_offset);
-+			SQUASHFS_SWAP_DIR_INDEX_2(index, &sindex);
-+		} else
-+			squashfs_get_cached_block(s, (char *) index,
-+					index_start, index_offset,
-+					sizeof(struct squashfs_dir_index_2),
-+					&index_start, &index_offset);
-+
-+		squashfs_get_cached_block(s, index->name, index_start,
-+					index_offset, index->size + 1,
-+					&index_start, &index_offset);
-+
-+		index->name[index->size + 1] = '\0';
-+
-+		if (strcmp(index->name, str) > 0)
-+			break;
-+
-+		length = index->index;
-+		*next_block = index->start_block + sblk->directory_table_start;
-+	}
-+
-+	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
-+	return length;
-+}
-+
-+		
-+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir)
-+{
-+	struct inode *i = file->f_dentry->d_inode;
-+	struct squashfs_sb_info *msblk = &i->i_sb->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long next_block = SQUASHFS_I(i)->start_block +
-+		sblk->directory_table_start;
-+	int next_offset = SQUASHFS_I(i)->offset, length = 0, dirs_read = 0,
-+		dir_count;
-+	struct squashfs_dir_header_2 dirh;
-+	char buffer[sizeof(struct squashfs_dir_entry_2) + SQUASHFS_NAME_LEN + 1];
-+	struct squashfs_dir_entry_2 *dire = (struct squashfs_dir_entry_2 *) buffer;
-+
-+	TRACE("Entered squashfs_readdir_2 [%llx:%x]\n", next_block, next_offset);
-+
-+	length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_start,
-+				SQUASHFS_I(i)->u.s2.directory_index_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_count,
-+				file->f_pos);
-+
-+	while (length < i_size_read(i)) {
-+		/* read directory header */
-+		if (msblk->swap) {
-+			struct squashfs_dir_header_2 sdirh;
-+			
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
-+					next_block, next_offset, sizeof(sdirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(sdirh);
-+			SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh);
-+		} else {
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
-+					next_block, next_offset, sizeof(dirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(dirh);
-+		}
-+
-+		dir_count = dirh.count + 1;
-+		while (dir_count--) {
-+			if (msblk->swap) {
-+				struct squashfs_dir_entry_2 sdire;
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						&sdire, next_block, next_offset,
-+						sizeof(sdire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				
-+				length += sizeof(sdire);
-+				SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire);
-+			} else {
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						dire, next_block, next_offset,
-+						sizeof(*dire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+				length += sizeof(*dire);
-+			}
-+
-+			if (!squashfs_get_cached_block(i->i_sb, dire->name,
-+						next_block, next_offset,
-+						dire->size + 1, &next_block,
-+						&next_offset))
-+				goto failed_read;
-+
-+			length += dire->size + 1;
-+
-+			if (file->f_pos >= length)
-+				continue;
-+
-+			dire->name[dire->size + 1] = '\0';
-+
-+			TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d)\n",
-+					(unsigned int) dirent, dire->name,
-+					dire->size + 1, (int) file->f_pos,
-+					dirh.start_block, dire->offset,
-+					squashfs_filetype_table[dire->type]);
-+
-+			if (filldir(dirent, dire->name, dire->size + 1,
-+					file->f_pos, SQUASHFS_MK_VFS_INODE(
-+					dirh.start_block, dire->offset),
-+					squashfs_filetype_table[dire->type])
-+					< 0) {
-+				TRACE("Filldir returned less than 0\n");
-+				goto finish;
-+			}
-+			file->f_pos = length;
-+			dirs_read++;
-+		}
-+	}
-+
-+finish:
-+	return dirs_read;
-+
-+failed_read:
-+	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
-+		next_offset);
-+	return 0;
-+}
-+
-+
-+static struct dentry *squashfs_lookup_2(struct inode *i, struct dentry *dentry)
-+{
-+	const unsigned char *name = dentry->d_name.name;
-+	int len = dentry->d_name.len;
-+	struct inode *inode = NULL;
-+	struct squashfs_sb_info *msblk = &i->i_sb->u.squashfs_sb;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long next_block = SQUASHFS_I(i)->start_block +
-+				sblk->directory_table_start;
-+	int next_offset = SQUASHFS_I(i)->offset, length = 0,
-+				dir_count;
-+	struct squashfs_dir_header_2 dirh;
-+	char buffer[sizeof(struct squashfs_dir_entry_2) + SQUASHFS_NAME_LEN];
-+	struct squashfs_dir_entry_2 *dire = (struct squashfs_dir_entry_2 *) buffer;
-+	int sorted = sblk->s_major == 2 && sblk->s_minor >= 1;
-+
-+	TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset);
-+
-+	if (len > SQUASHFS_NAME_LEN)
-+		goto exit_loop;
-+
-+	length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_start,
-+				SQUASHFS_I(i)->u.s2.directory_index_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_count, name,
-+				len);
-+
-+	while (length < i_size_read(i)) {
-+		/* read directory header */
-+		if (msblk->swap) {
-+			struct squashfs_dir_header_2 sdirh;
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
-+					next_block, next_offset, sizeof(sdirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(sdirh);
-+			SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh);
-+		} else {
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
-+					next_block, next_offset, sizeof(dirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(dirh);
-+		}
-+
-+		dir_count = dirh.count + 1;
-+		while (dir_count--) {
-+			if (msblk->swap) {
-+				struct squashfs_dir_entry_2 sdire;
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						&sdire, next_block,next_offset,
-+						sizeof(sdire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				
-+				length += sizeof(sdire);
-+				SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire);
-+			} else {
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						dire, next_block,next_offset,
-+						sizeof(*dire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+				length += sizeof(*dire);
-+			}
-+
-+			if (!squashfs_get_cached_block(i->i_sb, dire->name,
-+					next_block, next_offset, dire->size + 1,
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += dire->size + 1;
-+
-+			if (sorted && name[0] < dire->name[0])
-+				goto exit_loop;
-+
-+			if ((len == dire->size + 1) && !strncmp(name,
-+						dire->name, len)) {
-+				squashfs_inode_t ino =
-+					SQUASHFS_MKINODE(dirh.start_block,
-+					dire->offset);
-+
-+				TRACE("calling squashfs_iget for directory "
-+					"entry %s, inode %x:%x, %d\n", name,
-+					dirh.start_block, dire->offset, ino);
-+
-+				inode = (msblk->iget)(i->i_sb, ino);
-+
-+				goto exit_loop;
-+			}
-+		}
-+	}
-+
-+exit_loop:
-+	d_add(dentry, inode);
-+	return ERR_PTR(0);
-+
-+failed_read:
-+	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
-+		next_offset);
-+	goto exit_loop;
-+}
-+
-+
-+int squashfs_2_0_supported(struct squashfs_sb_info *msblk)
-+{
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	msblk->iget = squashfs_iget_2;
-+	msblk->read_fragment_index_table = read_fragment_index_table_2;
-+
-+	sblk->bytes_used = sblk->bytes_used_2;
-+	sblk->uid_start = sblk->uid_start_2;
-+	sblk->guid_start = sblk->guid_start_2;
-+	sblk->inode_table_start = sblk->inode_table_start_2;
-+	sblk->directory_table_start = sblk->directory_table_start_2;
-+	sblk->fragment_table_start = sblk->fragment_table_start_2;
-+
-+	return 1;
-+}
-diff --new-file -urp linux-2.4.32/fs/squashfs/squashfs.h linux-2.4.32-squashfs3.0/fs/squashfs/squashfs.h
---- linux-2.4.32/fs/squashfs/squashfs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-squashfs3.0/fs/squashfs/squashfs.h	2006-03-07 21:12:36.000000000 +0000
-@@ -0,0 +1,85 @@
-+/*
-+ * Squashfs - a compressed read only filesystem for Linux
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006
-+ * Phillip Lougher <phillip@lougher.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs.h
-+ */
-+
-+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
-+#undef CONFIG_SQUASHFS_1_0_COMPATIBILITY
-+#endif
-+#ifdef SQUASHFS_TRACE
-+#define TRACE(s, args...)	printk(KERN_NOTICE "SQUASHFS: "s, ## args)
-+#else
-+#define TRACE(s, args...)	{}
-+#endif
-+
-+#define ERROR(s, args...)	printk(KERN_ERR "SQUASHFS error: "s, ## args)
-+
-+#define SERROR(s, args...)	do { \
-+				if (!silent) \
-+				printk(KERN_ERR "SQUASHFS error: "s, ## args);\
-+				} while(0)
-+
-+#define WARNING(s, args...)	printk(KERN_WARNING "SQUASHFS: "s, ## args)
-+
-+#define SQUASHFS_I(INO)			(&INO->u.squashfs_i)
-+
-+#define i_size_read(INO)		(INO->i_size)
-+
-+#if defined(CONFIG_SQUASHFS_1_0_COMPATIBILITY ) || defined(CONFIG_SQUASHFS_2_0_COMPATIBILITY)
-+#define SQSH_EXTERN
-+extern unsigned int squashfs_read_data(struct super_block *s, char *buffer,
-+				long long index, unsigned int length,
-+				long long *next_index);
-+extern int squashfs_get_cached_block(struct super_block *s, char *buffer,
-+				long long block, unsigned int offset,
-+				int length, long long *next_block,
-+				unsigned int *next_offset);
-+extern void release_cached_fragment(struct squashfs_sb_info *msblk, struct
-+					squashfs_fragment_cache *fragment);
-+extern struct squashfs_fragment_cache *get_cached_fragment(struct super_block
-+					*s, long long start_block,
-+					int length);
-+extern struct address_space_operations squashfs_symlink_aops;
-+extern struct address_space_operations squashfs_aops;
-+extern struct address_space_operations squashfs_aops_4K;
-+extern struct file_operations squashfs_dir_ops;
-+extern struct inode_operations squashfs_dir_inode_ops;
-+#else
-+#define SQSH_EXTERN static
-+#endif
-+
-+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
-+extern int squashfs_1_0_supported(struct squashfs_sb_info *msblk);
-+#else
-+static inline int squashfs_1_0_supported(struct squashfs_sb_info *msblk)
-+{
-+	return 0;
-+}
-+#endif
-+
-+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+extern int squashfs_2_0_supported(struct squashfs_sb_info *msblk);
-+#else
-+static inline int squashfs_2_0_supported(struct squashfs_sb_info *msblk)
-+{
-+	return 0;
-+}
-+#endif
-diff --new-file -urp linux-2.4.32/include/linux/fs.h linux-2.4.32-squashfs3.0/include/linux/fs.h
---- linux-2.4.32/include/linux/fs.h	2005-04-04 02:42:20.000000000 +0100
-+++ linux-2.4.32-squashfs3.0/include/linux/fs.h	2006-03-07 21:12:36.000000000 +0000
-@@ -324,6 +324,7 @@ extern void set_bh_page(struct buffer_he
- #include <linux/usbdev_fs_i.h>
- #include <linux/jffs2_fs_i.h>
- #include <linux/cramfs_fs_sb.h>
-+#include <linux/squashfs_fs_i.h>
- 
- /*
-  * Attribute flags.  These should be or-ed together to figure out what
-@@ -519,6 +520,7 @@ struct inode {
- 		struct socket			socket_i;
- 		struct usbdev_inode_info        usbdev_i;
- 		struct jffs2_inode_info		jffs2_i;
-+		struct squashfs_inode_info	squashfs_i;
- 		void				*generic_ip;
- 	} u;
- };
-@@ -734,6 +736,7 @@ struct nameidata {
- #include <linux/usbdev_fs_sb.h>
- #include <linux/cramfs_fs_sb.h>
- #include <linux/jffs2_fs_sb.h>
-+#include <linux/squashfs_fs_sb.h>
- 
- extern struct list_head super_blocks;
- extern spinlock_t sb_lock;
-@@ -793,6 +796,7 @@ struct super_block {
- 		struct usbdev_sb_info   usbdevfs_sb;
- 		struct jffs2_sb_info	jffs2_sb;
- 		struct cramfs_sb_info	cramfs_sb;
-+		struct squashfs_sb_info	squashfs_sb;
- 		void			*generic_sbp;
- 	} u;
- 	/*
-diff --new-file -urp linux-2.4.32/include/linux/squashfs_fs.h linux-2.4.32-squashfs3.0/include/linux/squashfs_fs.h
---- linux-2.4.32/include/linux/squashfs_fs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-squashfs3.0/include/linux/squashfs_fs.h	2006-03-07 21:12:36.000000000 +0000
-@@ -0,0 +1,915 @@
-+#ifndef SQUASHFS_FS
-+#define SQUASHFS_FS
-+
-+/*
-+ * Squashfs
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006
-+ * Phillip Lougher <phillip@lougher.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs_fs.h
-+ */
-+
-+#ifndef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+#define CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+#endif
-+
-+#ifdef CONFIG_SQUASHFS_VMALLOC
-+#define SQUASHFS_ALLOC(a)		vmalloc(a)
-+#define SQUASHFS_FREE(a)		vfree(a)
-+#else
-+#define SQUASHFS_ALLOC(a)		kmalloc(a, GFP_KERNEL)
-+#define SQUASHFS_FREE(a)		kfree(a)
-+#endif
-+#ifdef CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE
-+#define SQUASHFS_CACHED_FRAGMENTS	CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE
-+#else
-+#define SQUASHFS_CACHED_FRAGMENTS	3
-+#endif
-+#define SQUASHFS_MAJOR			3
-+#define SQUASHFS_MINOR			0
-+#define SQUASHFS_MAGIC			0x73717368
-+#define SQUASHFS_MAGIC_SWAP		0x68737173
-+#define SQUASHFS_START			0
-+
-+/* size of metadata (inode and directory) blocks */
-+#define SQUASHFS_METADATA_SIZE		8192
-+#define SQUASHFS_METADATA_LOG		13
-+
-+/* default size of data blocks */
-+#define SQUASHFS_FILE_SIZE		65536
-+#define SQUASHFS_FILE_LOG		16
-+
-+#define SQUASHFS_FILE_MAX_SIZE		65536
-+
-+/* Max number of uids and gids */
-+#define SQUASHFS_UIDS			256
-+#define SQUASHFS_GUIDS			255
-+
-+/* Max length of filename (not 255) */
-+#define SQUASHFS_NAME_LEN		256
-+
-+#define SQUASHFS_INVALID		((long long) 0xffffffffffff)
-+#define SQUASHFS_INVALID_FRAG		((unsigned int) 0xffffffff)
-+#define SQUASHFS_INVALID_BLK		((long long) -1)
-+#define SQUASHFS_USED_BLK		((long long) -2)
-+
-+/* Filesystem flags */
-+#define SQUASHFS_NOI			0
-+#define SQUASHFS_NOD			1
-+#define SQUASHFS_CHECK			2
-+#define SQUASHFS_NOF			3
-+#define SQUASHFS_NO_FRAG		4
-+#define SQUASHFS_ALWAYS_FRAG		5
-+#define SQUASHFS_DUPLICATE		6
-+
-+#define SQUASHFS_BIT(flag, bit)		((flag >> bit) & 1)
-+
-+#define SQUASHFS_UNCOMPRESSED_INODES(flags)	SQUASHFS_BIT(flags, \
-+						SQUASHFS_NOI)
-+
-+#define SQUASHFS_UNCOMPRESSED_DATA(flags)	SQUASHFS_BIT(flags, \
-+						SQUASHFS_NOD)
-+
-+#define SQUASHFS_UNCOMPRESSED_FRAGMENTS(flags)	SQUASHFS_BIT(flags, \
-+						SQUASHFS_NOF)
-+
-+#define SQUASHFS_NO_FRAGMENTS(flags)		SQUASHFS_BIT(flags, \
-+						SQUASHFS_NO_FRAG)
-+
-+#define SQUASHFS_ALWAYS_FRAGMENTS(flags)	SQUASHFS_BIT(flags, \
-+						SQUASHFS_ALWAYS_FRAG)
-+
-+#define SQUASHFS_DUPLICATES(flags)		SQUASHFS_BIT(flags, \
-+						SQUASHFS_DUPLICATE)
-+
-+#define SQUASHFS_CHECK_DATA(flags)		SQUASHFS_BIT(flags, \
-+						SQUASHFS_CHECK)
-+
-+#define SQUASHFS_MKFLAGS(noi, nod, check_data, nof, no_frag, always_frag, \
-+		duplicate_checking)	(noi | (nod << 1) | (check_data << 2) \
-+		| (nof << 3) | (no_frag << 4) | (always_frag << 5) | \
-+		(duplicate_checking << 6))
-+
-+/* Max number of types and file types */
-+#define SQUASHFS_DIR_TYPE		1
-+#define SQUASHFS_FILE_TYPE		2
-+#define SQUASHFS_SYMLINK_TYPE		3
-+#define SQUASHFS_BLKDEV_TYPE		4
-+#define SQUASHFS_CHRDEV_TYPE		5
-+#define SQUASHFS_FIFO_TYPE		6
-+#define SQUASHFS_SOCKET_TYPE		7
-+#define SQUASHFS_LDIR_TYPE		8
-+#define SQUASHFS_LREG_TYPE		9
-+
-+/* 1.0 filesystem type definitions */
-+#define SQUASHFS_TYPES			5
-+#define SQUASHFS_IPC_TYPE		0
-+
-+/* Flag whether block is compressed or uncompressed, bit is set if block is
-+ * uncompressed */
-+#define SQUASHFS_COMPRESSED_BIT		(1 << 15)
-+
-+#define SQUASHFS_COMPRESSED_SIZE(B)	(((B) & ~SQUASHFS_COMPRESSED_BIT) ? \
-+		(B) & ~SQUASHFS_COMPRESSED_BIT :  SQUASHFS_COMPRESSED_BIT)
-+
-+#define SQUASHFS_COMPRESSED(B)		(!((B) & SQUASHFS_COMPRESSED_BIT))
-+
-+#define SQUASHFS_COMPRESSED_BIT_BLOCK		(1 << 24)
-+
-+#define SQUASHFS_COMPRESSED_SIZE_BLOCK(B)	(((B) & \
-+	~SQUASHFS_COMPRESSED_BIT_BLOCK) ? (B) & \
-+	~SQUASHFS_COMPRESSED_BIT_BLOCK : SQUASHFS_COMPRESSED_BIT_BLOCK)
-+
-+#define SQUASHFS_COMPRESSED_BLOCK(B)	(!((B) & SQUASHFS_COMPRESSED_BIT_BLOCK))
-+
-+/*
-+ * Inode number ops.  Inodes consist of a compressed block number, and an
-+ * uncompressed  offset within that block
-+ */
-+#define SQUASHFS_INODE_BLK(a)		((unsigned int) ((a) >> 16))
-+
-+#define SQUASHFS_INODE_OFFSET(a)	((unsigned int) ((a) & 0xffff))
-+
-+#define SQUASHFS_MKINODE(A, B)		((squashfs_inode_t)(((squashfs_inode_t) (A)\
-+					<< 16) + (B)))
-+
-+/* Compute 32 bit VFS inode number from squashfs inode number */
-+#define SQUASHFS_MK_VFS_INODE(a, b)	((unsigned int) (((a) << 8) + \
-+					((b) >> 2) + 1))
-+/* XXX */
-+
-+/* Translate between VFS mode and squashfs mode */
-+#define SQUASHFS_MODE(a)		((a) & 0xfff)
-+
-+/* fragment and fragment table defines */
-+#define SQUASHFS_FRAGMENT_BYTES(A)	(A * sizeof(struct squashfs_fragment_entry))
-+
-+#define SQUASHFS_FRAGMENT_INDEX(A)	(SQUASHFS_FRAGMENT_BYTES(A) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEX_OFFSET(A)	(SQUASHFS_FRAGMENT_BYTES(A) % \
-+						SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEXES(A)	((SQUASHFS_FRAGMENT_BYTES(A) + \
-+					SQUASHFS_METADATA_SIZE - 1) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEX_BYTES(A)	(SQUASHFS_FRAGMENT_INDEXES(A) *\
-+						sizeof(long long))
-+
-+/* cached data constants for filesystem */
-+#define SQUASHFS_CACHED_BLKS		8
-+
-+#define SQUASHFS_MAX_FILE_SIZE_LOG	64
-+
-+#define SQUASHFS_MAX_FILE_SIZE		((long long) 1 << \
-+					(SQUASHFS_MAX_FILE_SIZE_LOG - 2))
-+
-+#define SQUASHFS_MARKER_BYTE		0xff
-+
-+/* meta index cache */
-+#define SQUASHFS_META_INDEXES	(SQUASHFS_METADATA_SIZE / sizeof(unsigned int))
-+#define SQUASHFS_META_ENTRIES	31
-+#define SQUASHFS_META_NUMBER	8
-+#define SQUASHFS_SLOTS		4
-+
-+struct meta_entry {
-+	long long		data_block;
-+	unsigned int		index_block;
-+	unsigned short		offset;
-+	unsigned short		pad;
-+};
-+
-+struct meta_index {
-+	unsigned int		inode_number;
-+	unsigned int		offset;
-+	unsigned short		entries;
-+	unsigned short		skip;
-+	unsigned short		locked;
-+	unsigned short		pad;
-+	struct meta_entry	meta_entry[SQUASHFS_META_ENTRIES];
-+};
-+
-+
-+/*
-+ * definitions for structures on disk
-+ */
-+
-+typedef long long		squashfs_block_t;
-+typedef long long		squashfs_inode_t;
-+
-+struct squashfs_super_block {
-+	unsigned int		s_magic;
-+	unsigned int		inodes;
-+	unsigned int		bytes_used_2;
-+	unsigned int		uid_start_2;
-+	unsigned int		guid_start_2;
-+	unsigned int		inode_table_start_2;
-+	unsigned int		directory_table_start_2;
-+	unsigned int		s_major:16;
-+	unsigned int		s_minor:16;
-+	unsigned int		block_size_1:16;
-+	unsigned int		block_log:16;
-+	unsigned int		flags:8;
-+	unsigned int		no_uids:8;
-+	unsigned int		no_guids:8;
-+	unsigned int		mkfs_time /* time of filesystem creation */;
-+	squashfs_inode_t	root_inode;
-+	unsigned int		block_size;
-+	unsigned int		fragments;
-+	unsigned int		fragment_table_start_2;
-+	long long		bytes_used;
-+	long long		uid_start;
-+	long long		guid_start;
-+	long long		inode_table_start;
-+	long long		directory_table_start;
-+	long long		fragment_table_start;
-+	long long		unused;
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_index {
-+	unsigned int		index;
-+	unsigned int		start_block;
-+	unsigned char		size;
-+	unsigned char		name[0];
-+} __attribute__ ((packed));
-+
-+#define SQUASHFS_BASE_INODE_HEADER		\
-+	unsigned int		inode_type:4;	\
-+	unsigned int		mode:12;	\
-+	unsigned int		uid:8;		\
-+	unsigned int		guid:8;		\
-+	unsigned int		mtime;		\
-+	unsigned int 		inode_number;
-+
-+struct squashfs_base_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+} __attribute__ ((packed));
-+
-+struct squashfs_ipc_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+} __attribute__ ((packed));
-+
-+struct squashfs_dev_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	unsigned short		rdev;
-+} __attribute__ ((packed));
-+	
-+struct squashfs_symlink_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	unsigned short		symlink_size;
-+	char			symlink[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_reg_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	squashfs_block_t	start_block;
-+	unsigned int		fragment;
-+	unsigned int		offset;
-+	unsigned int		file_size;
-+	unsigned short		block_list[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_lreg_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	squashfs_block_t	start_block;
-+	unsigned int		fragment;
-+	unsigned int		offset;
-+	long long		file_size;
-+	unsigned short		block_list[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	unsigned int		file_size:19;
-+	unsigned int		offset:13;
-+	unsigned int		start_block;
-+	unsigned int		parent_inode;
-+} __attribute__  ((packed));
-+
-+struct squashfs_ldir_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	unsigned int		file_size:27;
-+	unsigned int		offset:13;
-+	unsigned int		start_block;
-+	unsigned int		i_count:16;
-+	unsigned int		parent_inode;
-+	struct squashfs_dir_index	index[0];
-+} __attribute__  ((packed));
-+
-+union squashfs_inode_header {
-+	struct squashfs_base_inode_header	base;
-+	struct squashfs_dev_inode_header	dev;
-+	struct squashfs_symlink_inode_header	symlink;
-+	struct squashfs_reg_inode_header	reg;
-+	struct squashfs_lreg_inode_header	lreg;
-+	struct squashfs_dir_inode_header	dir;
-+	struct squashfs_ldir_inode_header	ldir;
-+	struct squashfs_ipc_inode_header	ipc;
-+};
-+	
-+struct squashfs_dir_entry {
-+	unsigned int		offset:13;
-+	unsigned int		type:3;
-+	unsigned int		size:8;
-+	int			inode_number:16;
-+	char			name[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_header {
-+	unsigned int		count:8;
-+	unsigned int		start_block;
-+	unsigned int		inode_number;
-+} __attribute__ ((packed));
-+
-+struct squashfs_fragment_entry {
-+	long long		start_block;
-+	unsigned int		size;
-+	unsigned int		unused;
-+} __attribute__ ((packed));
-+
-+extern int squashfs_uncompress_block(void *d, int dstlen, void *s, int srclen);
-+extern int squashfs_uncompress_init(void);
-+extern int squashfs_uncompress_exit(void);
-+
-+/*
-+ * macros to convert each packed bitfield structure from little endian to big
-+ * endian and vice versa.  These are needed when creating or using a filesystem
-+ * on a machine with different byte ordering to the target architecture.
-+ *
-+ */
-+
-+#define SQUASHFS_SWAP_START \
-+	int bits;\
-+	int b_pos;\
-+	unsigned long long val;\
-+	unsigned char *s;\
-+	unsigned char *d;
-+
-+#define SQUASHFS_SWAP_SUPER_BLOCK(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_super_block));\
-+	SQUASHFS_SWAP((s)->s_magic, d, 0, 32);\
-+	SQUASHFS_SWAP((s)->inodes, d, 32, 32);\
-+	SQUASHFS_SWAP((s)->bytes_used_2, d, 64, 32);\
-+	SQUASHFS_SWAP((s)->uid_start_2, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->guid_start_2, d, 128, 32);\
-+	SQUASHFS_SWAP((s)->inode_table_start_2, d, 160, 32);\
-+	SQUASHFS_SWAP((s)->directory_table_start_2, d, 192, 32);\
-+	SQUASHFS_SWAP((s)->s_major, d, 224, 16);\
-+	SQUASHFS_SWAP((s)->s_minor, d, 240, 16);\
-+	SQUASHFS_SWAP((s)->block_size_1, d, 256, 16);\
-+	SQUASHFS_SWAP((s)->block_log, d, 272, 16);\
-+	SQUASHFS_SWAP((s)->flags, d, 288, 8);\
-+	SQUASHFS_SWAP((s)->no_uids, d, 296, 8);\
-+	SQUASHFS_SWAP((s)->no_guids, d, 304, 8);\
-+	SQUASHFS_SWAP((s)->mkfs_time, d, 312, 32);\
-+	SQUASHFS_SWAP((s)->root_inode, d, 344, 64);\
-+	SQUASHFS_SWAP((s)->block_size, d, 408, 32);\
-+	SQUASHFS_SWAP((s)->fragments, d, 440, 32);\
-+	SQUASHFS_SWAP((s)->fragment_table_start_2, d, 472, 32);\
-+	SQUASHFS_SWAP((s)->bytes_used, d, 504, 64);\
-+	SQUASHFS_SWAP((s)->uid_start, d, 568, 64);\
-+	SQUASHFS_SWAP((s)->guid_start, d, 632, 64);\
-+	SQUASHFS_SWAP((s)->inode_table_start, d, 696, 64);\
-+	SQUASHFS_SWAP((s)->directory_table_start, d, 760, 64);\
-+	SQUASHFS_SWAP((s)->fragment_table_start, d, 824, 64);\
-+	SQUASHFS_SWAP((s)->unused, d, 888, 64);\
-+}
-+
-+#define SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\
-+	SQUASHFS_MEMSET(s, d, n);\
-+	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
-+	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
-+	SQUASHFS_SWAP((s)->uid, d, 16, 8);\
-+	SQUASHFS_SWAP((s)->guid, d, 24, 8);\
-+	SQUASHFS_SWAP((s)->mtime, d, 32, 32);\
-+	SQUASHFS_SWAP((s)->inode_number, d, 64, 32);
-+
-+#define SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, n) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\
-+}
-+
-+#define SQUASHFS_SWAP_IPC_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_ipc_inode_header))\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DEV_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_dev_inode_header)); \
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->rdev, d, 128, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_symlink_inode_header));\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->symlink_size, d, 128, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_REG_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_reg_inode_header));\
-+	SQUASHFS_SWAP((s)->start_block, d, 96, 64);\
-+	SQUASHFS_SWAP((s)->fragment, d, 160, 32);\
-+	SQUASHFS_SWAP((s)->offset, d, 192, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 224, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_LREG_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_lreg_inode_header));\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 128, 64);\
-+	SQUASHFS_SWAP((s)->fragment, d, 192, 32);\
-+	SQUASHFS_SWAP((s)->offset, d, 224, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 256, 64);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_dir_inode_header));\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 128, 19);\
-+	SQUASHFS_SWAP((s)->offset, d, 147, 13);\
-+	SQUASHFS_SWAP((s)->start_block, d, 160, 32);\
-+	SQUASHFS_SWAP((s)->parent_inode, d, 192, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_LDIR_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_ldir_inode_header));\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 128, 27);\
-+	SQUASHFS_SWAP((s)->offset, d, 155, 13);\
-+	SQUASHFS_SWAP((s)->start_block, d, 168, 32);\
-+	SQUASHFS_SWAP((s)->i_count, d, 200, 16);\
-+	SQUASHFS_SWAP((s)->parent_inode, d, 216, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INDEX(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index));\
-+	SQUASHFS_SWAP((s)->index, d, 0, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 32, 32);\
-+	SQUASHFS_SWAP((s)->size, d, 64, 8);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header));\
-+	SQUASHFS_SWAP((s)->count, d, 0, 8);\
-+	SQUASHFS_SWAP((s)->start_block, d, 8, 32);\
-+	SQUASHFS_SWAP((s)->inode_number, d, 40, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_ENTRY(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry));\
-+	SQUASHFS_SWAP((s)->offset, d, 0, 13);\
-+	SQUASHFS_SWAP((s)->type, d, 13, 3);\
-+	SQUASHFS_SWAP((s)->size, d, 16, 8);\
-+	SQUASHFS_SWAP((s)->inode_number, d, 24, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_ENTRY(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry));\
-+	SQUASHFS_SWAP((s)->start_block, d, 0, 64);\
-+	SQUASHFS_SWAP((s)->size, d, 64, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_SHORTS(s, d, n) {\
-+	int entry;\
-+	int bit_position;\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, n * 2);\
-+	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
-+			16)\
-+		SQUASHFS_SWAP(s[entry], d, bit_position, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_INTS(s, d, n) {\
-+	int entry;\
-+	int bit_position;\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, n * 4);\
-+	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
-+			32)\
-+		SQUASHFS_SWAP(s[entry], d, bit_position, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_LONG_LONGS(s, d, n) {\
-+	int entry;\
-+	int bit_position;\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, n * 8);\
-+	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
-+			64)\
-+		SQUASHFS_SWAP(s[entry], d, bit_position, 64);\
-+}
-+
-+#define SQUASHFS_SWAP_DATA(s, d, n, bits) {\
-+	int entry;\
-+	int bit_position;\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, n * bits / 8);\
-+	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
-+			bits)\
-+		SQUASHFS_SWAP(s[entry], d, bit_position, bits);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_INDEXES(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n)
-+
-+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
-+
-+struct squashfs_base_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+} __attribute__ ((packed));
-+
-+struct squashfs_ipc_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned int		type:4;
-+	unsigned int		offset:4;
-+} __attribute__ ((packed));
-+
-+struct squashfs_dev_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned short		rdev;
-+} __attribute__ ((packed));
-+	
-+struct squashfs_symlink_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned short		symlink_size;
-+	char			symlink[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_reg_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned int		mtime;
-+	unsigned int		start_block;
-+	unsigned int		file_size:32;
-+	unsigned short		block_list[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned int		file_size:19;
-+	unsigned int		offset:13;
-+	unsigned int		mtime;
-+	unsigned int		start_block:24;
-+} __attribute__  ((packed));
-+
-+#define SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n) \
-+	SQUASHFS_MEMSET(s, d, n);\
-+	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
-+	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
-+	SQUASHFS_SWAP((s)->uid, d, 16, 4);\
-+	SQUASHFS_SWAP((s)->guid, d, 20, 4);
-+
-+#define SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, n) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n)\
-+}
-+
-+#define SQUASHFS_SWAP_IPC_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_ipc_inode_header_1));\
-+	SQUASHFS_SWAP((s)->type, d, 24, 4);\
-+	SQUASHFS_SWAP((s)->offset, d, 28, 4);\
-+}
-+
-+#define SQUASHFS_SWAP_DEV_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_dev_inode_header_1));\
-+	SQUASHFS_SWAP((s)->rdev, d, 24, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_symlink_inode_header_1));\
-+	SQUASHFS_SWAP((s)->symlink_size, d, 24, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_REG_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_reg_inode_header_1));\
-+	SQUASHFS_SWAP((s)->mtime, d, 24, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 56, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 88, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_dir_inode_header_1));\
-+	SQUASHFS_SWAP((s)->file_size, d, 24, 19);\
-+	SQUASHFS_SWAP((s)->offset, d, 43, 13);\
-+	SQUASHFS_SWAP((s)->mtime, d, 56, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 88, 24);\
-+}
-+
-+#endif
-+
-+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+
-+struct squashfs_dir_index_2 {
-+	unsigned int		index:27;
-+	unsigned int		start_block:29;
-+	unsigned char		size;
-+	unsigned char		name[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_base_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+} __attribute__ ((packed));
-+
-+struct squashfs_ipc_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+} __attribute__ ((packed));
-+
-+struct squashfs_dev_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned short		rdev;
-+} __attribute__ ((packed));
-+	
-+struct squashfs_symlink_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned short		symlink_size;
-+	char			symlink[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_reg_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned int		mtime;
-+	unsigned int		start_block;
-+	unsigned int		fragment;
-+	unsigned int		offset;
-+	unsigned int		file_size:32;
-+	unsigned short		block_list[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned int		file_size:19;
-+	unsigned int		offset:13;
-+	unsigned int		mtime;
-+	unsigned int		start_block:24;
-+} __attribute__  ((packed));
-+
-+struct squashfs_ldir_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned int		file_size:27;
-+	unsigned int		offset:13;
-+	unsigned int		mtime;
-+	unsigned int		start_block:24;
-+	unsigned int		i_count:16;
-+	struct squashfs_dir_index_2	index[0];
-+} __attribute__  ((packed));
-+
-+union squashfs_inode_header_2 {
-+	struct squashfs_base_inode_header_2	base;
-+	struct squashfs_dev_inode_header_2	dev;
-+	struct squashfs_symlink_inode_header_2	symlink;
-+	struct squashfs_reg_inode_header_2	reg;
-+	struct squashfs_dir_inode_header_2	dir;
-+	struct squashfs_ldir_inode_header_2	ldir;
-+	struct squashfs_ipc_inode_header_2	ipc;
-+};
-+	
-+struct squashfs_dir_header_2 {
-+	unsigned int		count:8;
-+	unsigned int		start_block:24;
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_entry_2 {
-+	unsigned int		offset:13;
-+	unsigned int		type:3;
-+	unsigned int		size:8;
-+	char			name[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_fragment_entry_2 {
-+	unsigned int		start_block;
-+	unsigned int		size;
-+} __attribute__ ((packed));
-+
-+#define SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\
-+	SQUASHFS_MEMSET(s, d, n);\
-+	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
-+	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
-+	SQUASHFS_SWAP((s)->uid, d, 16, 8);\
-+	SQUASHFS_SWAP((s)->guid, d, 24, 8);\
-+
-+#define SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, n) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\
-+}
-+
-+#define SQUASHFS_SWAP_IPC_INODE_HEADER_2(s, d) \
-+	SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, sizeof(struct squashfs_ipc_inode_header_2))
-+
-+#define SQUASHFS_SWAP_DEV_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_dev_inode_header_2)); \
-+	SQUASHFS_SWAP((s)->rdev, d, 32, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_symlink_inode_header_2));\
-+	SQUASHFS_SWAP((s)->symlink_size, d, 32, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_REG_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_reg_inode_header_2));\
-+	SQUASHFS_SWAP((s)->mtime, d, 32, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 64, 32);\
-+	SQUASHFS_SWAP((s)->fragment, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->offset, d, 128, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 160, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_dir_inode_header_2));\
-+	SQUASHFS_SWAP((s)->file_size, d, 32, 19);\
-+	SQUASHFS_SWAP((s)->offset, d, 51, 13);\
-+	SQUASHFS_SWAP((s)->mtime, d, 64, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 96, 24);\
-+}
-+
-+#define SQUASHFS_SWAP_LDIR_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_ldir_inode_header_2));\
-+	SQUASHFS_SWAP((s)->file_size, d, 32, 27);\
-+	SQUASHFS_SWAP((s)->offset, d, 59, 13);\
-+	SQUASHFS_SWAP((s)->mtime, d, 72, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 104, 24);\
-+	SQUASHFS_SWAP((s)->i_count, d, 128, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INDEX_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index_2));\
-+	SQUASHFS_SWAP((s)->index, d, 0, 27);\
-+	SQUASHFS_SWAP((s)->start_block, d, 27, 29);\
-+	SQUASHFS_SWAP((s)->size, d, 56, 8);\
-+}
-+#define SQUASHFS_SWAP_DIR_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header_2));\
-+	SQUASHFS_SWAP((s)->count, d, 0, 8);\
-+	SQUASHFS_SWAP((s)->start_block, d, 8, 24);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_ENTRY_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry_2));\
-+	SQUASHFS_SWAP((s)->offset, d, 0, 13);\
-+	SQUASHFS_SWAP((s)->type, d, 13, 3);\
-+	SQUASHFS_SWAP((s)->size, d, 16, 8);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_ENTRY_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry_2));\
-+	SQUASHFS_SWAP((s)->start_block, d, 0, 32);\
-+	SQUASHFS_SWAP((s)->size, d, 32, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_INDEXES_2(s, d, n) SQUASHFS_SWAP_INTS(s, d, n)
-+
-+/* fragment and fragment table defines */
-+#define SQUASHFS_FRAGMENT_BYTES_2(A)	(A * sizeof(struct squashfs_fragment_entry_2))
-+
-+#define SQUASHFS_FRAGMENT_INDEX_2(A)	(SQUASHFS_FRAGMENT_BYTES_2(A) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEX_OFFSET_2(A)	(SQUASHFS_FRAGMENT_BYTES_2(A) % \
-+						SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEXES_2(A)	((SQUASHFS_FRAGMENT_BYTES_2(A) + \
-+					SQUASHFS_METADATA_SIZE - 1) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEX_BYTES_2(A)	(SQUASHFS_FRAGMENT_INDEXES_2(A) *\
-+						sizeof(int))
-+
-+#endif
-+
-+#ifdef __KERNEL__
-+
-+/*
-+ * macros used to swap each structure entry, taking into account
-+ * bitfields and different bitfield placing conventions on differing
-+ * architectures
-+ */
-+
-+#include <asm/byteorder.h>
-+
-+#ifdef __BIG_ENDIAN
-+	/* convert from little endian to big endian */
-+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \
-+		tbits, b_pos)
-+#else
-+	/* convert from big endian to little endian */ 
-+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \
-+		tbits, 64 - tbits - b_pos)
-+#endif
-+
-+#define _SQUASHFS_SWAP(value, p, pos, tbits, SHIFT) {\
-+	b_pos = pos % 8;\
-+	val = 0;\
-+	s = (unsigned char *)p + (pos / 8);\
-+	d = ((unsigned char *) &val) + 7;\
-+	for(bits = 0; bits < (tbits + b_pos); bits += 8) \
-+		*d-- = *s++;\
-+	value = (val >> (SHIFT))/* & ((1 << tbits) - 1)*/;\
-+}
-+
-+#define SQUASHFS_MEMSET(s, d, n)	memset(s, 0, n);
-+
-+#endif
-+#endif
-diff --new-file -urp linux-2.4.32/include/linux/squashfs_fs_i.h linux-2.4.32-squashfs3.0/include/linux/squashfs_fs_i.h
---- linux-2.4.32/include/linux/squashfs_fs_i.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-squashfs3.0/include/linux/squashfs_fs_i.h	2006-03-07 21:12:36.000000000 +0000
-@@ -0,0 +1,44 @@
-+#ifndef SQUASHFS_FS_I
-+#define SQUASHFS_FS_I
-+/*
-+ * Squashfs
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006
-+ * Phillip Lougher <phillip@lougher.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs_fs_i.h
-+ */
-+
-+struct squashfs_inode_info {
-+	long long	start_block;
-+	unsigned int	offset;
-+	union {
-+		struct {
-+			long long	fragment_start_block;
-+			unsigned int	fragment_size;
-+			unsigned int	fragment_offset;
-+			long long	block_list_start;
-+		} s1;
-+		struct {
-+			long long	directory_index_start;
-+			unsigned int	directory_index_offset;
-+			unsigned int	directory_index_count;
-+			unsigned int	parent_inode;
-+		} s2;
-+	} u;
-+};
-+#endif
-diff --new-file -urp linux-2.4.32/include/linux/squashfs_fs_sb.h linux-2.4.32-squashfs3.0/include/linux/squashfs_fs_sb.h
---- linux-2.4.32/include/linux/squashfs_fs_sb.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-squashfs3.0/include/linux/squashfs_fs_sb.h	2006-03-07 21:12:36.000000000 +0000
-@@ -0,0 +1,74 @@
-+#ifndef SQUASHFS_FS_SB
-+#define SQUASHFS_FS_SB
-+/*
-+ * Squashfs
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006
-+ * Phillip Lougher <phillip@lougher.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs_fs_sb.h
-+ */
-+
-+#include <linux/squashfs_fs.h>
-+
-+struct squashfs_cache {
-+	long long	block;
-+	int		length;
-+	long long	next_index;
-+	char		*data;
-+};
-+
-+struct squashfs_fragment_cache {
-+	long long	block;
-+	int		length;
-+	unsigned int	locked;
-+	char		*data;
-+};
-+
-+struct squashfs_sb_info {
-+	struct squashfs_super_block	sblk;
-+	int			devblksize;
-+	int			devblksize_log2;
-+	int			swap;
-+	struct squashfs_cache	*block_cache;
-+	struct squashfs_fragment_cache	*fragment;
-+	int			next_cache;
-+	int			next_fragment;
-+	int			next_meta_index;
-+	unsigned int		*uid;
-+	unsigned int		*guid;
-+	long long		*fragment_index;
-+	unsigned int		*fragment_index_2;
-+	unsigned int		read_size;
-+	char			*read_data;
-+	char			*read_page;
-+	struct semaphore	read_data_mutex;
-+	struct semaphore	read_page_mutex;
-+	struct semaphore	block_cache_mutex;
-+	struct semaphore	fragment_mutex;
-+	struct semaphore	meta_index_mutex;
-+	wait_queue_head_t	waitq;
-+	wait_queue_head_t	fragment_wait_queue;
-+	struct meta_index	*meta_index;
-+	struct inode		*(*iget)(struct super_block *s,  squashfs_inode_t \
-+				inode);
-+	long long		(*read_blocklist)(struct inode *inode, int \
-+				index, int readahead_blks, char *block_list, \
-+				unsigned short **block_p, unsigned int *bsize);
-+	int			(*read_fragment_index_table)(struct super_block *s);
-+};
-+#endif
-diff --new-file -urp linux-2.4.32/init/do_mounts.c linux-2.4.32-squashfs3.0/init/do_mounts.c
---- linux-2.4.32/init/do_mounts.c	2003-11-28 18:26:21.000000000 +0000
-+++ linux-2.4.32-squashfs3.0/init/do_mounts.c	2006-03-07 21:12:36.000000000 +0000
-@@ -15,6 +15,7 @@
- #include <linux/minix_fs.h>
- #include <linux/ext2_fs.h>
- #include <linux/romfs_fs.h>
-+#include <linux/squashfs_fs.h>
- #include <linux/cramfs_fs.h>
- 
- #define BUILD_CRAMDISK
-@@ -476,6 +477,7 @@ static int __init crd_load(int in_fd, in
-  * 	minix
-  * 	ext2
-  *	romfs
-+ * 	squashfs
-  *	cramfs
-  * 	gzip
-  */
-@@ -486,6 +488,7 @@ identify_ramdisk_image(int fd, int start
- 	struct minix_super_block *minixsb;
- 	struct ext2_super_block *ext2sb;
- 	struct romfs_super_block *romfsb;
-+ 	struct squashfs_super_block *squashfsb;
- 	struct cramfs_super *cramfsb;
- 	int nblocks = -1;
- 	unsigned char *buf;
-@@ -497,6 +500,7 @@ identify_ramdisk_image(int fd, int start
- 	minixsb = (struct minix_super_block *) buf;
- 	ext2sb = (struct ext2_super_block *) buf;
- 	romfsb = (struct romfs_super_block *) buf;
-+ 	squashfsb = (struct squashfs_super_block *) buf;
- 	cramfsb = (struct cramfs_super *) buf;
- 	memset(buf, 0xe5, size);
- 
-@@ -535,6 +539,15 @@ identify_ramdisk_image(int fd, int start
- 		goto done;
- 	}
- 
-+	/* squashfs is at block zero too */
-+	if (squashfsb->s_magic == SQUASHFS_MAGIC) {
-+		printk(KERN_NOTICE
-+		       "RAMDISK: squashfs filesystem found at block %d\n",
-+		       start_block);
-+		nblocks = (squashfsb->bytes_used+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
-+		goto done;
-+	}
-+
- 	/*
- 	 * Read block 1 to test for minix and ext2 superblock
- 	 */
-diff --new-file -urp linux-2.4.32/lib/Config.in linux-2.4.32-squashfs3.0/lib/Config.in
---- linux-2.4.32/lib/Config.in	2003-11-28 18:26:21.000000000 +0000
-+++ linux-2.4.32-squashfs3.0/lib/Config.in	2006-03-07 21:12:36.000000000 +0000
-@@ -10,6 +10,7 @@ tristate 'CRC32 functions' CONFIG_CRC32
- # Do we need the compression support?
- #
- if [ "$CONFIG_CRAMFS" = "y" -o \
-+     "$CONFIG_SQUASHFS" = "y" -o \
-      "$CONFIG_PPP_DEFLATE" = "y" -o \
-      "$CONFIG_CRYPTO_DEFLATE" = "y" -o \
-      "$CONFIG_JFFS2_FS" = "y" -o \
-@@ -17,6 +18,7 @@ if [ "$CONFIG_CRAMFS" = "y" -o \
-    define_tristate CONFIG_ZLIB_INFLATE y
- else
-   if [ "$CONFIG_CRAMFS" = "m" -o \
-+       "$CONFIG_SQUASHFS" = "m" -o \
-        "$CONFIG_PPP_DEFLATE" = "m" -o \
-        "$CONFIG_CRYPTO_DEFLATE" = "m" -o \
-        "$CONFIG_JFFS2_FS" = "m" -o \
diff --git a/openwrt/target/linux/generic-2.4/patches/002-squashfs_lzma.patch b/openwrt/target/linux/generic-2.4/patches/002-squashfs_lzma.patch
deleted file mode 100644
index d534154871..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/002-squashfs_lzma.patch
+++ /dev/null
@@ -1,883 +0,0 @@
-diff -Nur linux-2.4.32/fs/squashfs/inode.c linux-2.4.32-owrt/fs/squashfs/inode.c
---- linux-2.4.32/fs/squashfs/inode.c	2006-03-21 13:06:10.000000000 +0100
-+++ linux-2.4.32-owrt/fs/squashfs/inode.c	2006-03-21 13:12:07.000000000 +0100
-@@ -4,6 +4,9 @@
-  * Copyright (c) 2002, 2003, 2004, 2005, 2006
-  * Phillip Lougher <phillip@lougher.org.uk>
-  *
-+ * LZMA decompressor support added by Oleg I. Vdovikin
-+ * Copyright (c) 2005 Oleg I.Vdovikin <oleg@cs.msu.su>
-+ *
-  * This program is free software; you can redistribute it and/or
-  * modify it under the terms of the GNU General Public License
-  * as published by the Free Software Foundation; either version 2,
-@@ -21,6 +24,7 @@
-  * inode.c
-  */
- 
-+#define SQUASHFS_LZMA
- #include <linux/types.h>
- #include <linux/squashfs_fs.h>
- #include <linux/module.h>
-@@ -40,6 +44,20 @@
- 
- #include "squashfs.h"
- 
-+#ifdef SQUASHFS_LZMA
-+#include "LzmaDecode.h"
-+
-+/* default LZMA settings, should be in sync with mksquashfs */
-+#define LZMA_LC 3
-+#define LZMA_LP 0
-+#define LZMA_PB 2
-+
-+#define LZMA_WORKSPACE_SIZE ((LZMA_BASE_SIZE + \
-+      (LZMA_LIT_SIZE << (LZMA_LC + LZMA_LP))) * sizeof(CProb))
-+
-+#endif
-+
-+
- static struct super_block *squashfs_read_super(struct super_block *, void *, int);
- static void squashfs_put_super(struct super_block *);
- static int squashfs_statfs(struct super_block *, struct statfs *);
-@@ -53,7 +71,11 @@
- 				int readahead_blks, char *block_list,
- 				unsigned short **block_p, unsigned int *bsize);
- 
-+#ifdef SQUASHFS_LZMA
-+static unsigned char lzma_workspace[LZMA_WORKSPACE_SIZE];
-+#else
- static z_stream stream;
-+#endif
- 
- static DECLARE_FSTYPE_DEV(squashfs_fs_type, "squashfs", squashfs_read_super);
- 
-@@ -229,6 +251,15 @@
- 	if (compressed) {
- 		int zlib_err;
- 
-+#ifdef SQUASHFS_LZMA
-+		if ((zlib_err = LzmaDecode(lzma_workspace, 
-+			LZMA_WORKSPACE_SIZE, LZMA_LC, LZMA_LP, LZMA_PB, 
-+			c_buffer, c_byte, buffer, msblk->read_size, &bytes)) != LZMA_RESULT_OK)
-+		{
-+			ERROR("lzma returned unexpected result 0x%x\n", zlib_err);
-+			bytes = 0;
-+		}
-+#else
- 		stream.next_in = c_buffer;
- 		stream.avail_in = c_byte;
- 		stream.next_out = buffer;
-@@ -243,6 +274,7 @@
- 			bytes = 0;
- 		} else
- 			bytes = stream.total_out;
-+#endif
- 		
- 		up(&msblk->read_data_mutex);
- 	}
-@@ -2004,17 +2036,21 @@
- 	printk(KERN_INFO "squashfs: version 3.0 (2006/03/15) "
- 		"Phillip Lougher\n");
- 
-+#ifndef SQUASHFS_LZMA
- 	if (!(stream.workspace = vmalloc(zlib_inflate_workspacesize()))) {
- 		ERROR("Failed to allocate zlib workspace\n");
- 		return -ENOMEM;
- 	}
-+#endif
- 	return register_filesystem(&squashfs_fs_type);
- }
- 
- 
- static void __exit exit_squashfs_fs(void)
- {
-+#ifndef SQUASHFS_LZMA
- 	vfree(stream.workspace);
-+#endif
- 	unregister_filesystem(&squashfs_fs_type);
- }
- 
-diff -Nur linux-2.4.32/fs/squashfs/LzmaDecode.c linux-2.4.32-owrt/fs/squashfs/LzmaDecode.c
---- linux-2.4.32/fs/squashfs/LzmaDecode.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-owrt/fs/squashfs/LzmaDecode.c	2006-03-21 13:06:33.000000000 +0100
-@@ -0,0 +1,663 @@
-+/*
-+  LzmaDecode.c
-+  LZMA Decoder
-+  
-+  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
-+  http://www.7-zip.org/
-+
-+  LZMA SDK is licensed under two licenses:
-+  1) GNU Lesser General Public License (GNU LGPL)
-+  2) Common Public License (CPL)
-+  It means that you can select one of these two licenses and 
-+  follow rules of that license.
-+
-+  SPECIAL EXCEPTION:
-+  Igor Pavlov, as the author of this code, expressly permits you to 
-+  statically or dynamically link your code (or bind by name) to the 
-+  interfaces of this file without subjecting your linked code to the 
-+  terms of the CPL or GNU LGPL. Any modifications or additions 
-+  to this file, however, are subject to the LGPL or CPL terms.
-+*/
-+
-+#include "LzmaDecode.h"
-+
-+#ifndef Byte
-+#define Byte unsigned char
-+#endif
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+
-+typedef struct _CRangeDecoder
-+{
-+  Byte *Buffer;
-+  Byte *BufferLim;
-+  UInt32 Range;
-+  UInt32 Code;
-+  #ifdef _LZMA_IN_CB
-+  ILzmaInCallback *InCallback;
-+  int Result;
-+  #endif
-+  int ExtraBytes;
-+} CRangeDecoder;
-+
-+Byte RangeDecoderReadByte(CRangeDecoder *rd)
-+{
-+  if (rd->Buffer == rd->BufferLim)
-+  {
-+    #ifdef _LZMA_IN_CB
-+    UInt32 size;
-+    rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
-+    rd->BufferLim = rd->Buffer + size;
-+    if (size == 0)
-+    #endif
-+    {
-+      rd->ExtraBytes = 1;
-+      return 0xFF;
-+    }
-+  }
-+  return (*rd->Buffer++);
-+}
-+
-+/* #define ReadByte (*rd->Buffer++) */
-+#define ReadByte (RangeDecoderReadByte(rd))
-+
-+void RangeDecoderInit(CRangeDecoder *rd,
-+  #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *inCallback
-+  #else
-+    Byte *stream, UInt32 bufferSize
-+  #endif
-+    )
-+{
-+  int i;
-+  #ifdef _LZMA_IN_CB
-+  rd->InCallback = inCallback;
-+  rd->Buffer = rd->BufferLim = 0;
-+  #else
-+  rd->Buffer = stream;
-+  rd->BufferLim = stream + bufferSize;
-+  #endif
-+  rd->ExtraBytes = 0;
-+  rd->Code = 0;
-+  rd->Range = (0xFFFFFFFF);
-+  for(i = 0; i < 5; i++)
-+    rd->Code = (rd->Code << 8) | ReadByte;
-+}
-+
-+#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;        
-+#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
-+#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
-+
-+UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
-+{
-+  RC_INIT_VAR
-+  UInt32 result = 0;
-+  int i;
-+  for (i = numTotalBits; i > 0; i--)
-+  {
-+    /* UInt32 t; */
-+    range >>= 1;
-+
-+    result <<= 1;
-+    if (code >= range)
-+    {
-+      code -= range;
-+      result |= 1;
-+    }
-+    /*
-+    t = (code - range) >> 31;
-+    t &= 1;
-+    code -= range & (t - 1);
-+    result = (result + result) | (1 - t);
-+    */
-+    RC_NORMALIZE
-+  }
-+  RC_FLUSH_VAR
-+  return result;
-+}
-+
-+int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
-+{
-+  UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
-+  if (rd->Code < bound)
-+  {
-+    rd->Range = bound;
-+    *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
-+    if (rd->Range < kTopValue)
-+    {
-+      rd->Code = (rd->Code << 8) | ReadByte;
-+      rd->Range <<= 8;
-+    }
-+    return 0;
-+  }
-+  else
-+  {
-+    rd->Range -= bound;
-+    rd->Code -= bound;
-+    *prob -= (*prob) >> kNumMoveBits;
-+    if (rd->Range < kTopValue)
-+    {
-+      rd->Code = (rd->Code << 8) | ReadByte;
-+      rd->Range <<= 8;
-+    }
-+    return 1;
-+  }
-+}
-+
-+#define RC_GET_BIT2(prob, mi, A0, A1) \
-+  UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
-+  if (code < bound) \
-+    { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
-+  else \
-+    { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
-+  RC_NORMALIZE
-+
-+#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)               
-+
-+int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
-+{
-+  int mi = 1;
-+  int i;
-+  #ifdef _LZMA_LOC_OPT
-+  RC_INIT_VAR
-+  #endif
-+  for(i = numLevels; i > 0; i--)
-+  {
-+    #ifdef _LZMA_LOC_OPT
-+    CProb *prob = probs + mi;
-+    RC_GET_BIT(prob, mi)
-+    #else
-+    mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
-+    #endif
-+  }
-+  #ifdef _LZMA_LOC_OPT
-+  RC_FLUSH_VAR
-+  #endif
-+  return mi - (1 << numLevels);
-+}
-+
-+int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
-+{
-+  int mi = 1;
-+  int i;
-+  int symbol = 0;
-+  #ifdef _LZMA_LOC_OPT
-+  RC_INIT_VAR
-+  #endif
-+  for(i = 0; i < numLevels; i++)
-+  {
-+    #ifdef _LZMA_LOC_OPT
-+    CProb *prob = probs + mi;
-+    RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
-+    #else
-+    int bit = RangeDecoderBitDecode(probs + mi, rd);
-+    mi = mi + mi + bit;
-+    symbol |= (bit << i);
-+    #endif
-+  }
-+  #ifdef _LZMA_LOC_OPT
-+  RC_FLUSH_VAR
-+  #endif
-+  return symbol;
-+}
-+
-+Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
-+{ 
-+  int symbol = 1;
-+  #ifdef _LZMA_LOC_OPT
-+  RC_INIT_VAR
-+  #endif
-+  do
-+  {
-+    #ifdef _LZMA_LOC_OPT
-+    CProb *prob = probs + symbol;
-+    RC_GET_BIT(prob, symbol)
-+    #else
-+    symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
-+    #endif
-+  }
-+  while (symbol < 0x100);
-+  #ifdef _LZMA_LOC_OPT
-+  RC_FLUSH_VAR
-+  #endif
-+  return symbol;
-+}
-+
-+Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
-+{ 
-+  int symbol = 1;
-+  #ifdef _LZMA_LOC_OPT
-+  RC_INIT_VAR
-+  #endif
-+  do
-+  {
-+    int bit;
-+    int matchBit = (matchByte >> 7) & 1;
-+    matchByte <<= 1;
-+    #ifdef _LZMA_LOC_OPT
-+    {
-+      CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
-+      RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
-+    }
-+    #else
-+    bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
-+    symbol = (symbol << 1) | bit;
-+    #endif
-+    if (matchBit != bit)
-+    {
-+      while (symbol < 0x100)
-+      {
-+        #ifdef _LZMA_LOC_OPT
-+        CProb *prob = probs + symbol;
-+        RC_GET_BIT(prob, symbol)
-+        #else
-+        symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
-+        #endif
-+      }
-+      break;
-+    }
-+  }
-+  while (symbol < 0x100);
-+  #ifdef _LZMA_LOC_OPT
-+  RC_FLUSH_VAR
-+  #endif
-+  return symbol;
-+}
-+
-+#define kNumPosBitsMax 4
-+#define kNumPosStatesMax (1 << kNumPosBitsMax)
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define LenChoice 0
-+#define LenChoice2 (LenChoice + 1)
-+#define LenLow (LenChoice2 + 1)
-+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
-+
-+int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
-+{
-+  if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
-+    return RangeDecoderBitTreeDecode(p + LenLow +
-+        (posState << kLenNumLowBits), kLenNumLowBits, rd);
-+  if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
-+    return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
-+        (posState << kLenNumMidBits), kLenNumMidBits, rd);
-+  return kLenNumLowSymbols + kLenNumMidSymbols + 
-+      RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
-+}
-+
-+#define kNumStates 12
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#define kNumPosSlotBits 6
-+#define kNumLenToPosStates 4
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+
-+#define kMatchMinLen 2
-+
-+#define IsMatch 0
-+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-+#define IsRepG0 (IsRep + kNumStates)
-+#define IsRepG1 (IsRepG0 + kNumStates)
-+#define IsRepG2 (IsRepG1 + kNumStates)
-+#define IsRep0Long (IsRepG2 + kNumStates)
-+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-+#define LenCoder (Align + kAlignTableSize)
-+#define RepLenCoder (LenCoder + kNumLenProbs)
-+#define Literal (RepLenCoder + kNumLenProbs)
-+
-+#if Literal != LZMA_BASE_SIZE
-+StopCompilingDueBUG
-+#endif
-+
-+#ifdef _LZMA_OUT_READ
-+
-+typedef struct _LzmaVarState
-+{
-+  CRangeDecoder RangeDecoder;
-+  Byte *Dictionary;
-+  UInt32 DictionarySize;
-+  UInt32 DictionaryPos;
-+  UInt32 GlobalPos;
-+  UInt32 Reps[4];
-+  int lc;
-+  int lp;
-+  int pb;
-+  int State;
-+  int PreviousIsMatch;
-+  int RemainLen;
-+} LzmaVarState;
-+
-+int LzmaDecoderInit(
-+    unsigned char *buffer, UInt32 bufferSize,
-+    int lc, int lp, int pb,
-+    unsigned char *dictionary, UInt32 dictionarySize,
-+    #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *inCallback
-+    #else
-+    unsigned char *inStream, UInt32 inSize
-+    #endif
-+    )
-+{
-+  LzmaVarState *vs = (LzmaVarState *)buffer;
-+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
-+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
-+  UInt32 i;
-+  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
-+    return LZMA_RESULT_NOT_ENOUGH_MEM;
-+  vs->Dictionary = dictionary;
-+  vs->DictionarySize = dictionarySize;
-+  vs->DictionaryPos = 0;
-+  vs->GlobalPos = 0;
-+  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
-+  vs->lc = lc;
-+  vs->lp = lp;
-+  vs->pb = pb;
-+  vs->State = 0;
-+  vs->PreviousIsMatch = 0;
-+  vs->RemainLen = 0;
-+  dictionary[dictionarySize - 1] = 0;
-+  for (i = 0; i < numProbs; i++)
-+    p[i] = kBitModelTotal >> 1; 
-+  RangeDecoderInit(&vs->RangeDecoder, 
-+      #ifdef _LZMA_IN_CB
-+      inCallback
-+      #else
-+      inStream, inSize
-+      #endif
-+  );
-+  return LZMA_RESULT_OK;
-+}
-+
-+int LzmaDecode(unsigned char *buffer, 
-+    unsigned char *outStream, UInt32 outSize,
-+    UInt32 *outSizeProcessed)
-+{
-+  LzmaVarState *vs = (LzmaVarState *)buffer;
-+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
-+  CRangeDecoder rd = vs->RangeDecoder;
-+  int state = vs->State;
-+  int previousIsMatch = vs->PreviousIsMatch;
-+  Byte previousByte;
-+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
-+  UInt32 nowPos = 0;
-+  UInt32 posStateMask = (1 << (vs->pb)) - 1;
-+  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
-+  int lc = vs->lc;
-+  int len = vs->RemainLen;
-+  UInt32 globalPos = vs->GlobalPos;
-+
-+  Byte *dictionary = vs->Dictionary;
-+  UInt32 dictionarySize = vs->DictionarySize;
-+  UInt32 dictionaryPos = vs->DictionaryPos;
-+
-+  if (len == -1)
-+  {
-+    *outSizeProcessed = 0;
-+    return LZMA_RESULT_OK;
-+  }
-+
-+  while(len > 0 && nowPos < outSize)
-+  {
-+    UInt32 pos = dictionaryPos - rep0;
-+    if (pos >= dictionarySize)
-+      pos += dictionarySize;
-+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
-+    if (++dictionaryPos == dictionarySize)
-+      dictionaryPos = 0;
-+    len--;
-+  }
-+  if (dictionaryPos == 0)
-+    previousByte = dictionary[dictionarySize - 1];
-+  else
-+    previousByte = dictionary[dictionaryPos - 1];
-+#else
-+
-+int LzmaDecode(
-+    Byte *buffer, UInt32 bufferSize,
-+    int lc, int lp, int pb,
-+    #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *inCallback,
-+    #else
-+    unsigned char *inStream, UInt32 inSize,
-+    #endif
-+    unsigned char *outStream, UInt32 outSize,
-+    UInt32 *outSizeProcessed)
-+{
-+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
-+  CProb *p = (CProb *)buffer;
-+  CRangeDecoder rd;
-+  UInt32 i;
-+  int state = 0;
-+  int previousIsMatch = 0;
-+  Byte previousByte = 0;
-+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
-+  UInt32 nowPos = 0;
-+  UInt32 posStateMask = (1 << pb) - 1;
-+  UInt32 literalPosMask = (1 << lp) - 1;
-+  int len = 0;
-+  if (bufferSize < numProbs * sizeof(CProb))
-+    return LZMA_RESULT_NOT_ENOUGH_MEM;
-+  for (i = 0; i < numProbs; i++)
-+    p[i] = kBitModelTotal >> 1; 
-+  RangeDecoderInit(&rd, 
-+      #ifdef _LZMA_IN_CB
-+      inCallback
-+      #else
-+      inStream, inSize
-+      #endif
-+      );
-+#endif
-+
-+  *outSizeProcessed = 0;
-+  while(nowPos < outSize)
-+  {
-+    int posState = (int)(
-+        (nowPos 
-+        #ifdef _LZMA_OUT_READ
-+        + globalPos
-+        #endif
-+        )
-+        & posStateMask);
-+    #ifdef _LZMA_IN_CB
-+    if (rd.Result != LZMA_RESULT_OK)
-+      return rd.Result;
-+    #endif
-+    if (rd.ExtraBytes != 0)
-+      return LZMA_RESULT_DATA_ERROR;
-+    if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
-+    {
-+      CProb *probs = p + Literal + (LZMA_LIT_SIZE * 
-+        (((
-+        (nowPos 
-+        #ifdef _LZMA_OUT_READ
-+        + globalPos
-+        #endif
-+        )
-+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-+
-+      if (state < 4) state = 0;
-+      else if (state < 10) state -= 3;
-+      else state -= 6;
-+      if (previousIsMatch)
-+      {
-+        Byte matchByte;
-+        #ifdef _LZMA_OUT_READ
-+        UInt32 pos = dictionaryPos - rep0;
-+        if (pos >= dictionarySize)
-+          pos += dictionarySize;
-+        matchByte = dictionary[pos];
-+        #else
-+        matchByte = outStream[nowPos - rep0];
-+        #endif
-+        previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
-+        previousIsMatch = 0;
-+      }
-+      else
-+        previousByte = LzmaLiteralDecode(probs, &rd);
-+      outStream[nowPos++] = previousByte;
-+      #ifdef _LZMA_OUT_READ
-+      dictionary[dictionaryPos] = previousByte;
-+      if (++dictionaryPos == dictionarySize)
-+        dictionaryPos = 0;
-+      #endif
-+    }
-+    else             
-+    {
-+      previousIsMatch = 1;
-+      if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
-+      {
-+        if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
-+        {
-+          if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
-+          {
-+            #ifdef _LZMA_OUT_READ
-+            UInt32 pos;
-+            #endif
-+            if (
-+               (nowPos 
-+                #ifdef _LZMA_OUT_READ
-+                + globalPos
-+                #endif
-+               )
-+               == 0)
-+              return LZMA_RESULT_DATA_ERROR;
-+            state = state < 7 ? 9 : 11;
-+            #ifdef _LZMA_OUT_READ
-+            pos = dictionaryPos - rep0;
-+            if (pos >= dictionarySize)
-+              pos += dictionarySize;
-+            previousByte = dictionary[pos];
-+            dictionary[dictionaryPos] = previousByte;
-+            if (++dictionaryPos == dictionarySize)
-+              dictionaryPos = 0;
-+            #else
-+            previousByte = outStream[nowPos - rep0];
-+            #endif
-+            outStream[nowPos++] = previousByte;
-+            continue;
-+          }
-+        }
-+        else
-+        {
-+          UInt32 distance;
-+          if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
-+            distance = rep1;
-+          else 
-+          {
-+            if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
-+              distance = rep2;
-+            else
-+            {
-+              distance = rep3;
-+              rep3 = rep2;
-+            }
-+            rep2 = rep1;
-+          }
-+          rep1 = rep0;
-+          rep0 = distance;
-+        }
-+        len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
-+        state = state < 7 ? 8 : 11;
-+      }
-+      else
-+      {
-+        int posSlot;
-+        rep3 = rep2;
-+        rep2 = rep1;
-+        rep1 = rep0;
-+        state = state < 7 ? 7 : 10;
-+        len = LzmaLenDecode(p + LenCoder, &rd, posState);
-+        posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
-+            kNumPosSlotBits), kNumPosSlotBits, &rd);
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          int numDirectBits = ((posSlot >> 1) - 1);
-+          rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            rep0 += RangeDecoderReverseBitTreeDecode(
-+                p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
-+          }
-+          else
-+          {
-+            rep0 += RangeDecoderDecodeDirectBits(&rd, 
-+                numDirectBits - kNumAlignBits) << kNumAlignBits;
-+            rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
-+          }
-+        }
-+        else
-+          rep0 = posSlot;
-+        rep0++;
-+      }
-+      if (rep0 == (UInt32)(0))
-+      {
-+        /* it's for stream version */
-+        len = -1;
-+        break;
-+      }
-+      if (rep0 > nowPos 
-+        #ifdef _LZMA_OUT_READ
-+        + globalPos
-+        #endif
-+        )
-+      {
-+        return LZMA_RESULT_DATA_ERROR;
-+      }
-+      len += kMatchMinLen;
-+      do
-+      {
-+        #ifdef _LZMA_OUT_READ
-+        UInt32 pos = dictionaryPos - rep0;
-+        if (pos >= dictionarySize)
-+          pos += dictionarySize;
-+        previousByte = dictionary[pos];
-+        dictionary[dictionaryPos] = previousByte;
-+        if (++dictionaryPos == dictionarySize)
-+          dictionaryPos = 0;
-+        #else
-+        previousByte = outStream[nowPos - rep0];
-+        #endif
-+        outStream[nowPos++] = previousByte;
-+        len--;
-+      }
-+      while(len > 0 && nowPos < outSize);
-+    }
-+  }
-+
-+  #ifdef _LZMA_OUT_READ
-+  vs->RangeDecoder = rd;
-+  vs->DictionaryPos = dictionaryPos;
-+  vs->GlobalPos = globalPos + nowPos;
-+  vs->Reps[0] = rep0;
-+  vs->Reps[1] = rep1;
-+  vs->Reps[2] = rep2;
-+  vs->Reps[3] = rep3;
-+  vs->State = state;
-+  vs->PreviousIsMatch = previousIsMatch;
-+  vs->RemainLen = len;
-+  #endif
-+
-+  *outSizeProcessed = nowPos;
-+  return LZMA_RESULT_OK;
-+}
-diff -Nur linux-2.4.32/fs/squashfs/LzmaDecode.h linux-2.4.32-owrt/fs/squashfs/LzmaDecode.h
---- linux-2.4.32/fs/squashfs/LzmaDecode.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-owrt/fs/squashfs/LzmaDecode.h	2006-03-21 13:06:33.000000000 +0100
-@@ -0,0 +1,100 @@
-+/* 
-+  LzmaDecode.h
-+  LZMA Decoder interface
-+
-+  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
-+  http://www.7-zip.org/
-+
-+  LZMA SDK is licensed under two licenses:
-+  1) GNU Lesser General Public License (GNU LGPL)
-+  2) Common Public License (CPL)
-+  It means that you can select one of these two licenses and 
-+  follow rules of that license.
-+
-+  SPECIAL EXCEPTION:
-+  Igor Pavlov, as the author of this code, expressly permits you to 
-+  statically or dynamically link your code (or bind by name) to the 
-+  interfaces of this file without subjecting your linked code to the 
-+  terms of the CPL or GNU LGPL. Any modifications or additions 
-+  to this file, however, are subject to the LGPL or CPL terms.
-+*/
-+
-+#ifndef __LZMADECODE_H
-+#define __LZMADECODE_H
-+
-+/* #define _LZMA_IN_CB */
-+/* Use callback for input data */
-+
-+/* #define _LZMA_OUT_READ */
-+/* Use read function for output data */
-+
-+/* #define _LZMA_PROB32 */
-+/* It can increase speed on some 32-bit CPUs, 
-+   but memory usage will be doubled in that case */
-+
-+/* #define _LZMA_LOC_OPT */
-+/* Enable local speed optimizations inside code */
-+
-+#ifndef UInt32
-+#ifdef _LZMA_UINT32_IS_ULONG
-+#define UInt32 unsigned long
-+#else
-+#define UInt32 unsigned int
-+#endif
-+#endif
-+
-+#ifdef _LZMA_PROB32
-+#define CProb UInt32
-+#else
-+#define CProb unsigned short
-+#endif
-+
-+#define LZMA_RESULT_OK 0
-+#define LZMA_RESULT_DATA_ERROR 1
-+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
-+
-+#ifdef _LZMA_IN_CB
-+typedef struct _ILzmaInCallback
-+{
-+  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
-+} ILzmaInCallback;
-+#endif
-+
-+#define LZMA_BASE_SIZE 1846
-+#define LZMA_LIT_SIZE 768
-+
-+/* 
-+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
-+bufferSize += 100 in case of _LZMA_OUT_READ
-+by default CProb is unsigned short, 
-+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
-+*/
-+
-+#ifdef _LZMA_OUT_READ
-+int LzmaDecoderInit(
-+    unsigned char *buffer, UInt32 bufferSize,
-+    int lc, int lp, int pb,
-+    unsigned char *dictionary, UInt32 dictionarySize,
-+  #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *inCallback
-+  #else
-+    unsigned char *inStream, UInt32 inSize
-+  #endif
-+);
-+#endif
-+
-+int LzmaDecode(
-+    unsigned char *buffer, 
-+  #ifndef _LZMA_OUT_READ
-+    UInt32 bufferSize,
-+    int lc, int lp, int pb,
-+  #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *inCallback,
-+  #else
-+    unsigned char *inStream, UInt32 inSize,
-+  #endif
-+  #endif
-+    unsigned char *outStream, UInt32 outSize,
-+    UInt32 *outSizeProcessed);
-+
-+#endif
-diff -Nur linux-2.4.32/fs/squashfs/Makefile linux-2.4.32-owrt/fs/squashfs/Makefile
---- linux-2.4.32/fs/squashfs/Makefile	2006-03-21 13:06:10.000000000 +0100
-+++ linux-2.4.32-owrt/fs/squashfs/Makefile	2006-03-21 13:12:39.000000000 +0100
-@@ -4,7 +4,7 @@
- 
- O_TARGET := squashfs.o
- 
--obj-y  := inode.o squashfs2_0.o
-+obj-y  := inode.o squashfs2_0.o LzmaDecode.o
- 
- obj-m := $(O_TARGET)
- 
diff --git a/openwrt/target/linux/generic-2.4/patches/003-jffs2_compression.patch b/openwrt/target/linux/generic-2.4/patches/003-jffs2_compression.patch
deleted file mode 100644
index 56c5b3cbc0..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/003-jffs2_compression.patch
+++ /dev/null
@@ -1,9119 +0,0 @@
-diff -Nur linux-mips-cvs/Documentation/Configure.help linux-mips/Documentation/Configure.help
---- linux-mips-cvs/Documentation/Configure.help	2005-01-20 03:19:21.000000000 +0100
-+++ linux-mips/Documentation/Configure.help	2005-02-07 05:08:35.000000000 +0100
-@@ -17528,6 +17528,32 @@
-   If reporting bugs, please try to have available a full dump of the
-   messages at debug level 1 while the misbehaviour was occurring.
- 
-+ARMLIB compression support for BBC (EXPERIMENTAL)
-+CONFIG_JFFS2_BBC_ARMLIB
-+  This enables ARMLIB support for BBC.
-+
-+LZO1X-* compression support for BBC (EXPERIMENTAL)
-+CONFIG_JFFS2_BBC_LZO
-+  This enables LZO1X-1 and LZO1X-999 support for BBC. (fast & good
-+  compressor, beats ZLIB in everything)
-+
-+LZARI compression support for BBC (EXPERIMENTAL)
-+CONFIG_JFFS2_BBC_LZARI
-+  This enables LempelZiv-Storer-Szymanski compression for BBC with
-+  additional arithmetic coding (damn slow, but best compresor).
-+
-+LZHD compression support for BBC (EXPERIMENTAL)
-+CONFIG_JFFS2_BBC_LZHD
-+  This enables LempelZiv-Storer-Szymanski compression for BBC with
-+  additional dynamic Huffman coding (a little faster than LZARI, and
-+  it's compression ratio is a little worse than LZARI's)
-+
-+LZSS compression support for BBC (EXPERIMENTAL)
-+CONFIG_JFFS2_BBC_LZSS
-+  This enables simple LempelZiv-Storer-Szymanski compression for BBC
-+  (faster than LZHD, and, and has a not-so-good compression ratio,
-+  was included just for testing)
-+
- JFFS stats available in /proc filesystem
- CONFIG_JFFS_PROC_FS
-   Enabling this option will cause statistics from mounted JFFS file systems
-diff -Nur linux-mips-cvs/fs/Config.in linux-mips/fs/Config.in
---- linux-mips-cvs/fs/Config.in	2004-11-19 01:28:47.000000000 +0100
-+++ linux-mips/fs/Config.in	2005-02-07 05:08:34.000000000 +0100
-@@ -50,6 +50,12 @@
- if [ "$CONFIG_JFFS2_FS" = "y" -o "$CONFIG_JFFS2_FS" = "m" ] ; then
-    int 'JFFS2 debugging verbosity (0 = quiet, 2 = noisy)' CONFIG_JFFS2_FS_DEBUG 0
- fi
-+dep_mbool '  ARMLIB compression support for BBC (EXPERIMENTAL)' CONFIG_JFFS2_BBC_ARMLIB $CONFIG_JFFS2_FS
-+dep_mbool '  LZO1X-* compression support for BBC (EXPERIMENTAL)' CONFIG_JFFS2_BBC_LZO $CONFIG_JFFS2_FS
-+dep_mbool '  LZARI compression support for BBC (EXPERIMENTAL)' CONFIG_JFFS2_BBC_LZARI $CONFIG_JFFS2_FS
-+dep_mbool '  LZHD compression support for BBC (EXPERIMENTAL)' CONFIG_JFFS2_BBC_LZHD $CONFIG_JFFS2_FS
-+dep_mbool '  LZSS compression support for BBC (EXPERIMENTAL)' CONFIG_JFFS2_BBC_LZSS $CONFIG_JFFS2_FS
-+
- tristate 'Compressed ROM file system support' CONFIG_CRAMFS
- bool 'Virtual memory file system support (former shm fs)' CONFIG_TMPFS
- define_bool CONFIG_RAMFS y
-diff -Nur linux-mips-cvs/fs/jffs2/Config.in.bbc.inc linux-mips/fs/jffs2/Config.in.bbc.inc
---- linux-mips-cvs/fs/jffs2/Config.in.bbc.inc	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/Config.in.bbc.inc	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,5 @@
-+dep_mbool '  ARMLIB compression support for BBC (EXPERIMENTAL)' CONFIG_JFFS2_BBC_ARMLIB $CONFIG_JFFS2_FS
-+dep_mbool '  LZO1X-* compression support for BBC (EXPERIMENTAL)' CONFIG_JFFS2_BBC_LZO $CONFIG_JFFS2_FS
-+dep_mbool '  LZARI compression support for BBC (EXPERIMENTAL)' CONFIG_JFFS2_BBC_LZARI $CONFIG_JFFS2_FS
-+dep_mbool '  LZHD compression support for BBC (EXPERIMENTAL)' CONFIG_JFFS2_BBC_LZHD $CONFIG_JFFS2_FS
-+dep_mbool '  LZSS compression support for BBC (EXPERIMENTAL)' CONFIG_JFFS2_BBC_LZSS $CONFIG_JFFS2_FS
-diff -Nur linux-mips-cvs/fs/jffs2/Configure.help.bbc.inc linux-mips/fs/jffs2/Configure.help.bbc.inc
---- linux-mips-cvs/fs/jffs2/Configure.help.bbc.inc	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/Configure.help.bbc.inc	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,25 @@
-+ARMLIB compression support for BBC (EXPERIMENTAL)
-+CONFIG_JFFS2_BBC_ARMLIB
-+  This enables ARMLIB support for BBC.
-+
-+LZO1X-* compression support for BBC (EXPERIMENTAL)
-+CONFIG_JFFS2_BBC_LZO
-+  This enables LZO1X-1 and LZO1X-999 support for BBC. (fast & good
-+  compressor, beats ZLIB in everything)
-+
-+LZARI compression support for BBC (EXPERIMENTAL)
-+CONFIG_JFFS2_BBC_LZARI
-+  This enables LempelZiv-Storer-Szymanski compression for BBC with
-+  additional arithmetic coding (damn slow, but best compresor).
-+
-+LZHD compression support for BBC (EXPERIMENTAL)
-+CONFIG_JFFS2_BBC_LZHD
-+  This enables LempelZiv-Storer-Szymanski compression for BBC with
-+  additional dynamic Huffman coding (a little faster than LZARI, and
-+  it's compression ratio is a little worse than LZARI's)
-+
-+LZSS compression support for BBC (EXPERIMENTAL)
-+CONFIG_JFFS2_BBC_LZSS
-+  This enables simple LempelZiv-Storer-Szymanski compression for BBC
-+  (faster than LZHD, and, and has a not-so-good compression ratio,
-+  was included just for testing)
-diff -Nur linux-mips-cvs/fs/jffs2/Kconfig.bbc.inc linux-mips/fs/jffs2/Kconfig.bbc.inc
---- linux-mips-cvs/fs/jffs2/Kconfig.bbc.inc	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/Kconfig.bbc.inc	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,40 @@
-+config JFFS2_BBC_ARMLIB
-+	bool "ARMLIB compression support for BBC (EXPERIMENTAL)"
-+	depends on JFFS2_FS && EXPERIMENTAL
-+	default y
-+	help
-+	  This enables ARMLIB support for BBC.
-+
-+config JFFS2_BBC_LZO
-+	bool "LZO1X-* compression support for BBC (EXPERIMENTAL)"
-+	depends on JFFS2_FS && EXPERIMENTAL
-+	default y
-+	help
-+	  This enables LZO1X-1 and LZO1X-999 support for BBC. (fast & good
-+	  compressor)
-+
-+config JFFS2_BBC_LZARI
-+	bool "LZARI compression support for BBC (EXPERIMENTAL)"
-+	depends on JFFS2_FS && EXPERIMENTAL
-+	default y
-+	help
-+	  This enables LempelZiv-Storer-Szymanski compression for BBC with
-+	  additional arithmetic coding (damn slow, but best compresor).
-+
-+config JFFS2_BBC_LZHD
-+	bool "LZHD compression support for BBC (EXPERIMENTAL)"
-+	depends on JFFS2_FS && EXPERIMENTAL
-+	default y
-+	help
-+	  This enables LempelZiv-Storer-Szymanski compression for BBC with
-+	  additional dynamic Huffman coding (a little faster than LZARI, and
-+	  it's compression ratio is a little worse than LZARI's)
-+
-+config JFFS2_BBC_LZSS
-+	bool "LZSS compression support for BBC (EXPERIMENTAL)"
-+	depends on JFFS2_FS && EXPERIMENTAL
-+	default y
-+	help
-+	  This enables simple LempelZiv-Storer-Szymanski compression for BBC
-+	  (faster than LZHD, and, and has a not-so-good compression ratio,
-+	  was included just for testing)
-diff -Nur linux-mips-cvs/fs/jffs2/Makefile linux-mips/fs/jffs2/Makefile
---- linux-mips-cvs/fs/jffs2/Makefile	2003-08-13 19:19:25.000000000 +0200
-+++ linux-mips/fs/jffs2/Makefile	2005-02-07 05:08:34.000000000 +0100
-@@ -10,9 +10,23 @@
- # Note 2! The CFLAGS definitions are now in the main makefile...
- 
- 
-+JFFS2_BBC_KERNEL_OBJS-y = jffs2_bbc_framework.o jffs2_bbc_fs.o
-+
-+JFFS2_BBC_KERNEL_OBJS-$(CONFIG_JFFS2_BBC_ARMLIB) += jffs2_bbc_armlib_comp.o
-+JFFS2_BBC_KERNEL_OBJS-$(CONFIG_JFFS2_BBC_LZO) += jffs2_bbc_lzo_comp.o
-+JFFS2_BBC_KERNEL_OBJS-$(CONFIG_JFFS2_BBC_LZSS) += jffs2_bbc_lzss_comp.o
-+JFFS2_BBC_KERNEL_OBJS-$(CONFIG_JFFS2_BBC_LZARI) += jffs2_bbc_lzari_comp.o
-+JFFS2_BBC_KERNEL_OBJS-$(CONFIG_JFFS2_BBC_LZHD) += jffs2_bbc_lzhd_comp.o
-+
-+JFFS2_BBC_KERNEL_OBJS := $(JFFS2_BBC_KERNEL_OBJS-y)
-+
-+JFFS2_BBC_MKFS_OBJS   = jffs2_bbc_mkfs.o jffs2_bbc_framework.o jffs2_bbc_armlib_comp.o jffs2_bbc_lzo_comp.o\
-+                        jffs2_bbc_lzss_comp.o jffs2_bbc_lzari_comp.o jffs2_bbc_lzhd_comp.o
-+
- COMPR_OBJS	:= compr.o compr_rubin.o compr_rtime.o pushpull.o \
- 			compr_zlib.o
- JFFS2_OBJS	:= dir.o file.o ioctl.o nodelist.o malloc.o \
-+	$(JFFS2_BBC_KERNEL_OBJS) \
- 	read.o nodemgmt.o readinode.o super.o write.o scan.o gc.o \
- 	symlink.o build.o erase.o background.o
- 
-diff -Nur linux-mips-cvs/fs/jffs2/Makefile.bbc.inc linux-mips/fs/jffs2/Makefile.bbc.inc
---- linux-mips-cvs/fs/jffs2/Makefile.bbc.inc	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/Makefile.bbc.inc	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,12 @@
-+JFFS2_BBC_KERNEL_OBJS-y = jffs2_bbc_framework.o jffs2_bbc_fs.o
-+
-+JFFS2_BBC_KERNEL_OBJS-$(CONFIG_JFFS2_BBC_ARMLIB) += jffs2_bbc_armlib_comp.o
-+JFFS2_BBC_KERNEL_OBJS-$(CONFIG_JFFS2_BBC_LZO) += jffs2_bbc_lzo_comp.o
-+JFFS2_BBC_KERNEL_OBJS-$(CONFIG_JFFS2_BBC_LZSS) += jffs2_bbc_lzss_comp.o
-+JFFS2_BBC_KERNEL_OBJS-$(CONFIG_JFFS2_BBC_LZARI) += jffs2_bbc_lzari_comp.o
-+JFFS2_BBC_KERNEL_OBJS-$(CONFIG_JFFS2_BBC_LZHD) += jffs2_bbc_lzhd_comp.o
-+
-+JFFS2_BBC_KERNEL_OBJS := $(JFFS2_BBC_KERNEL_OBJS-y)
-+
-+JFFS2_BBC_MKFS_OBJS   = jffs2_bbc_mkfs.o jffs2_bbc_framework.o jffs2_bbc_armlib_comp.o jffs2_bbc_lzo_comp.o\
-+                        jffs2_bbc_lzss_comp.o jffs2_bbc_lzari_comp.o jffs2_bbc_lzhd_comp.o
-diff -Nur linux-mips-cvs/fs/jffs2/compr_zlib.c linux-mips/fs/jffs2/compr_zlib.c
---- linux-mips-cvs/fs/jffs2/compr_zlib.c	2003-01-11 18:53:17.000000000 +0100
-+++ linux-mips/fs/jffs2/compr_zlib.c	2005-02-07 05:08:35.000000000 +0100
-@@ -85,7 +85,7 @@
- 	vfree(inflate_workspace);
- }
- 
--int zlib_compress(unsigned char *data_in, unsigned char *cpage_out, 
-+int jffs2_zlib_compress2(unsigned char *data_in, unsigned char *cpage_out,
- 		   __u32 *sourcelen, __u32 *dstlen)
- {
- 	z_stream strm;
-@@ -145,7 +145,7 @@
- 	return 0;
- }
- 
--void zlib_decompress(unsigned char *data_in, unsigned char *cpage_out,
-+void jffs2_zlib_decompress2(unsigned char *data_in, unsigned char *cpage_out,
- 		      __u32 srclen, __u32 destlen)
- {
- 	z_stream strm;
-@@ -175,3 +175,19 @@
- 	zlib_inflateEnd(&strm);
- 	up(&inflate_sem);
- }
-+
-+extern int jffs2_zlib_compress(unsigned char *data_in, unsigned char *cpage_out, __u32 * sourcelen, __u32 * dstlen);
-+extern void jffs2_zlib_decompress(unsigned char *data_in, unsigned char *cpage_out, __u32 srclen, __u32 destlen);
-+
-+int zlib_compress(unsigned char *data_in, unsigned char *cpage_out,
-+                   __u32 *sourcelen, __u32 *dstlen)
-+{
-+		return jffs2_zlib_compress(data_in,cpage_out,sourcelen,dstlen);
-+}
-+
-+void zlib_decompress(unsigned char *data_in, unsigned char *cpage_out,
-+                      __u32 srclen, __u32 destlen)
-+{
-+		jffs2_zlib_decompress(data_in,cpage_out,srclen,destlen);
-+}
-+
-diff -Nur linux-mips-cvs/fs/jffs2/file.c linux-mips/fs/jffs2/file.c
---- linux-mips-cvs/fs/jffs2/file.c	2003-11-17 02:07:44.000000000 +0100
-+++ linux-mips/fs/jffs2/file.c	2005-02-07 05:08:35.000000000 +0100
-@@ -35,6 +35,7 @@
-  *
-  */
- 
-+#include "jffs2_bbc_framework.h" /**BBC**/
- #include <linux/kernel.h>
- #include <linux/mtd/compatmac.h> /* for min() */
- #include <linux/slab.h>
-@@ -459,6 +460,7 @@
- 
- 		comprbuf = kmalloc(cdatalen, GFP_KERNEL);
- 		if (comprbuf) {
-+			jffs2_bbc_model_set_act_sb(c); /**BBC**/
- 			comprtype = jffs2_compress(page_address(pg)+ (file_ofs & (PAGE_CACHE_SIZE-1)), comprbuf, &datalen, &cdatalen);
- 		}
- 		if (comprtype == JFFS2_COMPR_NONE) {
-diff -Nur linux-mips-cvs/fs/jffs2/gc.c linux-mips/fs/jffs2/gc.c
---- linux-mips-cvs/fs/jffs2/gc.c	2003-11-17 02:07:44.000000000 +0100
-+++ linux-mips/fs/jffs2/gc.c	2005-02-07 05:08:35.000000000 +0100
-@@ -35,6 +35,7 @@
-  *
-  */
- 
-+#include "jffs2_bbc_framework.h" /**BBC**/
- #include <linux/kernel.h>
- #include <linux/mtd/mtd.h>
- #include <linux/slab.h>
-@@ -651,6 +652,7 @@
- 		writebuf = pg_ptr + (offset & (PAGE_CACHE_SIZE -1));
- 
- 		if (comprbuf) {
-+			jffs2_bbc_model_set_act_sb(c); /**BBC**/
- 			comprtype = jffs2_compress(writebuf, comprbuf, &datalen, &cdatalen);
- 		}
- 		if (comprtype) {
-diff -Nur linux-mips-cvs/fs/jffs2/hpatch linux-mips/fs/jffs2/hpatch
---- linux-mips-cvs/fs/jffs2/hpatch	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/hpatch	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,191 @@
-+#!/usr/bin/perl
-+# A patch-like utility
-+# Designed for patching different version of jffs2 with the same hpatch file
-+#
-+# Copyright (C) 2004, Ferenc Havasi
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License
-+# as published by the Free Software Foundation; either version 2
-+# of the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-+
-+$filename_tmp1="file1.tmp";
-+$filename_tmp2="file2.tmp";
-+
-+$filename_in="";
-+$filename_out=$filename_tmp1;
-+$filename_cnt=0;
-+
-+# Modes:
-+# 0: expecting =
-+# 1: normal_cmd
-+# 2: skip until =
-+# 3: expecting F (first state)
-+$mode=3;
-+
-+%rules = ();
-+
-+sub file_end {
-+  if (($mode!=2)&&($modified==1)) {
-+    while (<SRC>) {
-+      print DST $_;
-+    }
-+    close(SRC);
-+    close(DST);
-+    if ($cmd_name ne "") { $rules{"$cmd_name"}=1; }
-+    $filename_result=$filename_out;
-+    if ($filename_result ne $filename_in_save) {
-+      open(RES,"<$filename_result") or die "Cannot open $filename_result.\n";
-+      open(DST,">$filename_in_save") or die "Cannot open $filename_in_save.\n";
-+      while (<RES>) {
-+        print DST $_;
-+      }
-+      close(DST);
-+      close(RES);
-+    }
-+    unlink($filename_tmp1) && unlink($filename_tmp2);
-+  }
-+  else {
-+    close(SRC);
-+    close(DST);
-+    $filename_result=$filename_in;
-+    if ($filename_result ne $filename_in_save) {
-+      open(RES,"<$filename_result") or die "Cannot open $filename_result.\n";
-+      open(DST,">$filename_in_save") or die "Cannot open $filename_in_save.\n";
-+      while (<RES>) {
-+        print DST $_;
-+      }
-+      close(DST);
-+      close(RES);
-+    }
-+    unlink($filename_tmp1);
-+  }
-+  $modified=0;
-+  foreach $rulename (keys %rules) {
-+    if ($rules{"$rulename"}==0) { print(STDERR "On $filename_in_save error applying rule $rulename.\n"); }
-+  }
-+  %rules = ();
-+}
-+
-+if ($#ARGV<0) {
-+  print ("usage: hpatch hpatch_file\n");
-+  exit;
-+}
-+
-+open(CMD,"<$ARGV[0]") or die "Cannot open $ARGV[0].\n";
-+$cmd_linenum=0;
-+
-+while (chomp($cmd_line=<CMD>)) {
-+  $cmd_linenum++;
-+  if ($cmd_line eq "") {next;}
-+  #$cmd_line =~ s/\#.*//;
-+  $cmd_line =~ s/\ *$//;
-+  if ($cmd_line eq "") {next;}
-+  if ($cmd_line =~ /^F(.*)/) {
-+    $tmp_filename_in=$1;
-+    if ($mode!=3) {
-+      file_end();
-+    }
-+    $filename_in=$tmp_filename_in;
-+    $filename_in_save=$filename_in;
-+    open(SRC,"<$filename_in") or die "Cannot open $filename_in.\n";
-+    open(DST,">$filename_out") or die "Cannot open $filename_out.\n";;
-+    $modified=0;
-+    $mode=0;
-+    next;
-+  }
-+  if ($mode==3) {die "error: F expression expected in line $cmd_linenum\n";}
-+  if ($cmd_line =~ /^=(.*)/) {
-+    $tmp_cmd_name=$1;
-+    if (($mode!=2)&&($modified==1)) {
-+      while (<SRC>) {
-+        print DST $_;
-+      }
-+      close(SRC);
-+      close(DST);
-+      if (($cmd_name ne "")) {$rules{"$cmd_name"}=1;};
-+      $filename_cnt++;
-+      if ($filename_cnt%2==1) {
-+        $filename_in=$filename_tmp1;
-+        $filename_out=$filename_tmp2;
-+      }
-+      else {
-+        $filename_in=$filename_tmp2;
-+        $filename_out=$filename_tmp1;
-+      }
-+    }
-+    else {
-+      close(SRC);
-+      close(DST);
-+    }
-+    $mode=1;
-+    $cmd_name=$tmp_cmd_name;
-+    if (($cmd_name ne "")) {
-+      if ($rules{"$cmd_name"}==1) {
-+        $mode=2;
-+      }
-+      else {
-+        $rules{"$cmd_name"}=0;	
-+      }
-+    }
-+    open(SRC,"<$filename_in") or die "Cannot open $filename_in.\n";
-+    open(DST,">$filename_out") or die "Cannot open $filename_out.\n";
-+    $modified=0;
-+    next;
-+  }
-+  if ($mode == 0) {die "error: = expression expected in line $cmd_linenum\n";}
-+  if ($mode == 2) {next;}
-+  if ($cmd_line =~ /^!(.*)/) {
-+    print "$1\n";
-+    $modified=1;
-+    next;
-+  }
-+  if ($cmd_line =~ /^\?(.*)/) {
-+    $search_str=$1;
-+    $found=0;
-+    while (<SRC>) {
-+      print DST $_;
-+      if (index($_,$search_str)>=0) {$found=1; last;}
-+    }
-+    if ($found==0) { $mode=2; }
-+    next;
-+  }
-+  if ($cmd_line =~ /^\+(.*)/) {
-+    print DST "$1\n";
-+    $modified=1;
-+    next;
-+  }
-+  if ($cmd_line =~ /^\-(.*)/) {
-+    $search_str=$1;
-+    $found=0;
-+    while (<SRC>) {
-+      if (index($_,$search_str)>=0) {$saved_line=$_; $found=1; $modified=1; last;}
-+      print DST $_;
-+    }
-+    if ($found==0) { $mode=2; }
-+    next;
-+  }
-+  if ($cmd_line =~ /^i(.*)/) {
-+    $filename_inc=$1;
-+    open(INCSRC,"<$filename_inc") or die "Cannot open $filename_inc.\n";
-+    while (<INCSRC>) {
-+      print DST $_;
-+    }
-+    next;
-+  }
-+  if ($cmd_line =~ /^I/) {
-+    print DST $saved_line;
-+    next;
-+  }
-+}
-+file_end();
-+close(CMD);
-diff -Nur linux-mips-cvs/fs/jffs2/jffs2_bbc_armlib_comp.c linux-mips/fs/jffs2/jffs2_bbc_armlib_comp.c
---- linux-mips-cvs/fs/jffs2/jffs2_bbc_armlib_comp.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/jffs2_bbc_armlib_comp.c	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,2224 @@
-+/*
-+ * JFFS2-BBC: armlib compressor plugin
-+ *
-+ * $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+ *
-+ * Copyright (C) 2004, Ferenc Havasi & Tamas Gergely
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-+ *
-+ */
-+
-+#include "jffs2_bbc_framework.h"
-+
-+#ifdef __KERNEL__
-+#include <linux/string.h>
-+#else
-+#include <string.h>
-+#endif
-+
-+//ORIGIN: include/DataStructures/TypeDefs.h
-+
-+/*******************************************************************************
-+* FILE:     TypeDefs.h
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+#ifndef TYPEDEFS_H
-+#define TYPEDEFS_H
-+
-+#pragma pack(4)
-+
-+#ifndef bool
-+#define bool  char
-+#define true  1
-+#define false 0
-+#endif
-+
-+#ifndef u8
-+#define u8  unsigned char
-+#endif
-+#ifndef u16
-+#define u16 unsigned short
-+#endif
-+#ifndef u32
-+#define u32 unsigned long
-+#endif
-+#ifndef s8
-+#define s8  signed char
-+#endif
-+#ifndef s16
-+#define s16 signed short
-+#endif
-+#ifndef s32
-+#define s32 signed long
-+#endif
-+
-+typedef struct
-+{
-+	u32 capacity;
-+	u32 size;
-+	u32 alloc_size;
-+	void *ptr;
-+} vector;
-+
-+#define VECTOR_P_END(vct)   ((void*)(((char*)((vct)->ptr)) + (vct)->size))
-+#define VECTOR_S_END(vct)   ((void*)(((char*)((vct).ptr)) + (vct).size))
-+
-+static void vector_clear(vector *);
-+#ifdef JFFS2_BBC_ARMLIB_MODELGEN
-+static void vector_reset(vector *);
-+static void vector_clr_ptr(vector *);
-+static void vector_add_u8(vector *, u8);
-+static void vector_add_u16(vector *, u16);
-+static void vector_add_u32(vector *, u32);
-+static void vector_add_s8(vector *, s8);
-+static void vector_add_s16(vector *, s16);
-+static void vector_add_s32(vector *, s32);
-+static void vector_add_ptr(vector *, void *);
-+static void vector_concat(vector *, vector *);
-+#endif
-+
-+#endif
-+
-+//ORIGIN: include/DataStructures/DataTypes.h
-+
-+/*******************************************************************************
-+* FILE:     DataTypes.h
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+#ifndef DATATYPES_H
-+#define DATATYPES_H
-+
-+//#include "DataStructures/TypeDefs.h"
-+
-+typedef u16 THUMB_DataType;
-+typedef u32 ARM_DataType;
-+typedef u8 TokenType;
-+typedef u8 PredictorType;
-+typedef u8 *ProbDist;
-+
-+typedef vector RawData;
-+typedef vector RawBlocks;
-+typedef vector TokenStream;
-+typedef vector TokenBlocks;
-+typedef vector LatType;
-+
-+#define THUMB_DATA_LENGTH    16
-+#define ARM_DATA_LENGTH      32
-+#define TOKEN_LENGTH          8
-+#define TOKEN_MAXVALUE     0xff
-+#define PREDICTOR_LENGTH      8
-+#define PREDICTOR_MAXVALUE 0xff
-+
-+#endif
-+
-+//ORIGIN: include/DataStructures/BitVector.h
-+
-+/*******************************************************************************
-+* FILE:     BitVector.h
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+#ifndef BITVECTOR_H
-+#define BITVECTOR_H
-+
-+//#include "DataStructures/TypeDefs.h"
-+
-+typedef vector BitBlocks;
-+
-+#pragma pack(4)
-+
-+typedef struct
-+{
-+	u32 freebits;
-+	u32 capacity;
-+	u32 size;
-+	u8 *base;
-+	u8 *ptr;
-+} BitVector;
-+
-+#ifdef JFFS2_BBC_ARMLIB_MODELGEN
-+static void bitblocks_clear(BitBlocks *);
-+static void bitvector_clear(BitVector *);
-+static void bitvector_W_reset(BitVector *);
-+static void bitvector_W_add0(BitVector *);
-+static void bitvector_W_add1(BitVector *);
-+static void bitvector_W_concat_b(BitVector *, BitVector *);
-+static void bitvector_W_concat_v(BitVector *, vector *);
-+static void bitvector_W_flush(BitVector *);
-+static void bitvector_R_reset(BitVector *);
-+static u8 bitvector_R_get1(BitVector *);
-+static u8 bitvector_R_get8(BitVector *);
-+#endif
-+
-+#define BITVECTOR_P_END(bv)    ((void*)(((bv)->base)+((bv)->size)))
-+#define BITVECTOR_S_END(bv)    ((void*)( ((bv).base)+ ((bv).size)))
-+#define BITVECTOR_SKIP(bv,num) ((bv)->ptr) += (num)
-+
-+#endif
-+
-+//ORIGIN: include/DataStructures/DecisionTree.h
-+
-+/*******************************************************************************
-+* FILE:     DecisionTree.h
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+#ifndef DECISIONTREE_H
-+#define DECISIONTREE_H
-+
-+//#include "DataStructures/DataTypes.h"
-+
-+#pragma pack(4)
-+
-+#define TREENODETYPE_NULLNODE         0
-+#define TREENODETYPE_NODE_BINARY_EQ   1
-+#define TREENODETYPE_LEAF_P           2
-+#define TREENODETYPE_LEAF_C           3
-+#define TREENODETYPE_NODE_BINARY_LT   5
-+#define TREENODETYPE_IS_NODE(n)        (((n) == TREENODETYPE_NODE_BINARY_EQ) || \
-+                                        ((n) == TREENODETYPE_NODE_BINARY_LT))
-+#define TREENODETYPE_IS_NODE_BINARY(n) (((n) == TREENODETYPE_NODE_BINARY_EQ) || \
-+                                        ((n) == TREENODETYPE_NODE_BINARY_LT))
-+
-+#define TREENODETYPE_IS_LEAF(n)        (((n) == TREENODETYPE_LEAF_P) || \
-+                                        ((n) == TREENODETYPE_LEAF_C))
-+
-+
-+#define TREE_SUBTREE_RELATION_LEFT_EQ  !=
-+#define TREE_SUBTREE_RELATION_RIGHT_EQ ==
-+#define TREE_SUBTREE_RELATION_LEFT_LT  <
-+#define TREE_SUBTREE_RELATION_RIGHT_LT >=
-+
-+#define GET_NODE_PTR_TYPE(n) (((TreeNodeDummy*)(n))->type)
-+
-+typedef struct
-+{
-+	u8 type;
-+} TreeNodeDummy;
-+
-+typedef struct
-+{
-+	u8 type;		// [TREENODETYPE_NODE_BINARY]
-+	u8 attribute;
-+	PredictorType value;
-+	void *left;
-+	void *right;
-+} TreeNodeBinary;
-+
-+typedef struct
-+{
-+	u8 type;		// [TREENODETYPE_LEAF_P]
-+	u16 pairs;
-+	PredictorType *probabilities;
-+} TreeLeafP;
-+
-+typedef struct
-+{
-+	u8 type;		// [TREENODETYPE_LEAF_C]
-+	PredictorType predicted_class;
-+} TreeLeafC;
-+
-+typedef struct
-+{
-+	u32 high;
-+	u32 low;
-+	u32 max;
-+} ProbabilityType;
-+
-+
-+typedef struct
-+{
-+	void *root;
-+	u16 number_of_classes;
-+	u16 number_of_predictors;
-+	PredictorType *predictor_max_values;
-+} DecisionTree;
-+
-+#ifdef JFFS2_BBC_ARMLIB_MODELGEN
-+static void decisiontree_delete(DecisionTree *);
-+static void decisiontree_get_probability_for_token(void *, PredictorType *, TokenType, ProbabilityType *);
-+static TokenType decisiontree_get_token_for_range(void *, PredictorType *, u32, u32, ProbabilityType *);
-+#endif
-+
-+#endif
-+
-+//ORIGIN: include/DataStructures/PredictorTable.h
-+
-+/*******************************************************************************
-+* FILE:     PredictorTable.h
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+#ifndef PREDICTORTABLE_H
-+#define PREDICTORTABLE_H
-+
-+//#include "DataStructures/TypeDefs.h"
-+//#include "DataStructures/DataTypes.h"
-+////#include "DataStructures/Filter.h"
-+////#include "DataStructures/Converter.h"
-+////#include "DataStructures/Manipulator.h"
-+
-+#define NUMBER_OF_PREDICTORS_ARM 17
-+
-+#ifndef __KERNEL__
-+#define NUMBER_OF_PREDICTORS_TXT 2
-+#else
-+#undef  TXT_TOKENS
-+#endif // __KERNEL__
-+
-+#ifdef  TXT_TOKENS
-+#define NUMBER_OF_PREDICTORS    NUMBER_OF_PREDICTORS_TXT
-+#define predictortable_reset    predictortable_resetTXT
-+#define predictortable_update   predictortable_updateTXT
-+#define predictortable_minvalue predictortable_minvalueTXT
-+#define predictortable_maxvalue predictortable_maxvalueTXT
-+#else
-+#define NUMBER_OF_PREDICTORS    NUMBER_OF_PREDICTORS_ARM
-+#define predictortable_reset    predictortable_resetARM
-+#define predictortable_update   predictortable_updateARM
-+#define predictortable_minvalue predictortable_minvalueARM
-+#define predictortable_maxvalue predictortable_maxvalueARM
-+#endif
-+
-+
-+#pragma pack(4)
-+
-+typedef struct
-+{
-+	PredictorType *predictors;
-+} PredictorTable;
-+
-+#ifdef JFFS2_BBC_ARMLIB_MODELGEN
-+static void predictortable_clear(PredictorTable *);
-+static void predictortable_free(PredictorTable *);
-+static void predictortable_resetARM(PredictorTable *);
-+static void predictortable_updateARM(PredictorTable *, TokenType);
-+static PredictorType predictortable_minvalueARM(PredictorTable *, u32);
-+static PredictorType predictortable_maxvalueARM(PredictorTable *, u32);
-+#endif
-+
-+#ifndef __KERNEL__
-+/*
-+static void predictortable_resetTXT(PredictorTable *);
-+static void predictortable_updateTXT(PredictorTable *, TokenType);
-+static PredictorType predictortable_minvalueTXT(PredictorTable *, u32);
-+static PredictorType predictortable_maxvalueTXT(PredictorTable *, u32);
-+*/
-+#endif // __KERNEL__
-+
-+#endif
-+
-+//ORIGIN: include/DataStructures/ipack_model.h
-+
-+/*******************************************************************************
-+* FILE:     ipack_model.h
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+#ifndef IPACK_MODEL_H
-+#define IPACK_MODEL_H
-+
-+//#include "DataStructures/DataTypes.h"
-+//#include "DataStructures/DecisionTree.h"
-+//#include "DataStructures/PredictorTable.h"
-+
-+#define PROBABILITY_SHIFT 12
-+#define PROBABILITY_MAX   0x00001000l
-+
-+#define NUMBER_OF_TOKENS_ARM                  16
-+#define NUMBER_OF_TOKENS_PER_INSTRUCTION_ARM   8
-+
-+#ifndef __KERNEL__
-+#define NUMBER_OF_TOKENS_TXT                 256
-+#define NUMBER_OF_TOKENS_PER_INSTRUCTION_TXT   4
-+#else
-+#undef TXT_TOKENS
-+#endif // __KERNEL__
-+
-+#ifdef TXT_TOKENS
-+#define NUMBER_OF_TOKENS                 NUMBER_OF_TOKENS_TXT
-+#define NUMBER_OF_TOKENS_PER_INSTRUCTION NUMBER_OF_TOKENS_PER_INSTRUCTION_TXT
-+#else
-+#define NUMBER_OF_TOKENS                 NUMBER_OF_TOKENS_ARM
-+#define NUMBER_OF_TOKENS_PER_INSTRUCTION NUMBER_OF_TOKENS_PER_INSTRUCTION_ARM
-+#endif
-+
-+#pragma pack(4)
-+
-+/*
-+        Data structure of an internal node of the tree
-+*/
-+typedef struct
-+{
-+	PredictorType *attribute_ptr;
-+	u32 value;		// PredictorType
-+	void *right_child_ptr;
-+} ipack_treenodeBin;
-+/*
-+        Data structure of a leaf with probabilities
-+*/
-+typedef struct
-+{
-+	u16 probabilities[0];	// PredictorType[0]
-+} ipack_treeleafP;
-+/*
-+        Data structure of a leaf with class prediction
-+*/
-+typedef struct
-+{
-+	PredictorType predicted_class;	// PredictorType
-+} ipack_treeleafC;
-+/*
-+        Possible data structures of a tree node
-+*/
-+typedef union
-+{
-+	ipack_treenodeBin nodeBin;
-+	ipack_treeleafP leafP;
-+	ipack_treeleafC leafC;
-+} ipack_node_data;
-+/*
-+        Tree node
-+*/
-+typedef struct
-+{
-+	u32 type;		// u8
-+	ipack_node_data data;	// ipack_node_data
-+} ipack_nodetype;
-+/*
-+        Nullnode
-+*/
-+typedef struct
-+{
-+	u32 type;
-+	u16 probabilities[NUMBER_OF_TOKENS];
-+} ipack_nullnode;
-+/*
-+        Model for ipack project
-+*/
-+typedef struct
-+{
-+	char ID[4];		// char[4]
-+	char block_sign[4];	// only the first 2 are used!
-+	void *tree_root_ptr;	// void*
-+	void *tree_code;	// generated ARM code
-+	PredictorType *predictors_ptr;	// PredictorType*
-+	ipack_nullnode nullnode;
-+} ipack_model_type;
-+
-+typedef struct
-+{
-+	u32 high;
-+	u32 low;
-+} ipack_probability_type;
-+
-+
-+static void ipack_model_get_probability_for_token(ipack_nodetype *, TokenType, ipack_probability_type *);
-+static TokenType ipack_model_get_token_for_range(ipack_nodetype *, u32, u32, ipack_probability_type *);
-+/*void      ipack_model_predictortable_reset     (PredictorType*);
-+void      ipack_model_predictortable_update    (PredictorType*, TokenType);*/
-+
-+#ifndef __KERNEL__
-+/*static void ipack_model_printinfo(ipack_model_type *);
-+static void ipack_dumpmodel(void *);*/
-+#endif
-+
-+#endif
-+
-+//ORIGIN: include/Builders/PredictorGenerator.h
-+
-+/*******************************************************************************
-+* FILE:     PredictorGenerator.h
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+#ifndef PREDICTORGENERATOR_H
-+#define PREDICTORGENERATOR_H
-+
-+//#include "DataStructures.h"
-+
-+#ifdef JFFS2_BBC_ARMLIB_MODELGEN
-+static PredictorTable *predictorgenerator_generate(void);
-+#endif
-+
-+#endif
-+
-+//ORIGIN: include/Builders/Coder.h
-+
-+/*******************************************************************************
-+* FILE:     Coder.h
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+#ifndef CODER_H
-+#define CODER_H
-+
-+#define CODER_VALUEBITS 16
-+#define CODER_VALUEMAX  0x00010000l
-+#define CODER_VALUE3RD  0x0000c000l
-+#define CODER_VALUEHLF  0x00008000l
-+#define CODER_VALUE1ST  0x00004000l
-+
-+#endif
-+
-+//ORIGIN: DataStructures/src/TypeDefs.c
-+
-+/*******************************************************************************
-+* FILE:     TypeDefs.c
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+//#include "ipack_common.h"
-+//#include "DataStructures/TypeDefs.h"
-+#ifndef __KERNEL__
-+#include <memory.h>
-+#endif
-+
-+#define VECTOR_ALLOC_SIZE 0x00001000
-+
-+static void vector_clear(vector * vct)
-+{
-+	if (vct->ptr)
-+		jffs2_bbc_free(vct->ptr);
-+	vct->capacity = 0;
-+	vct->size = 0;
-+	vct->ptr = 0;
-+}
-+
-+#ifdef JFFS2_BBC_ARMLIB_MODELGEN
-+static void vector_extend(vector * vct)
-+{
-+	void *tmp;
-+	vct->capacity += vct->alloc_size;
-+	tmp = jffs2_bbc_malloc(vct->capacity);
-+	if (vct->ptr) {
-+		memcpy(tmp, vct->ptr, vct->size);
-+		jffs2_bbc_free(vct->ptr);
-+	}
-+	vct->ptr = tmp;
-+}
-+
-+static void vector_reset(vector * vct)
-+{
-+	vct->capacity = 0;
-+	vct->size = 0;
-+	vct->alloc_size = VECTOR_ALLOC_SIZE;
-+	vct->ptr = 0;
-+}
-+
-+static void vector_clr_ptr(vector * vct)
-+{
-+	void **it;
-+	void *end_it;
-+	for (it = vct->ptr, end_it = (((char *) (vct->ptr)) + vct->size); it != end_it; it++) {
-+		vector_clear(*it);
-+		jffs2_bbc_free(*it);
-+	}
-+	if (vct->ptr)
-+		jffs2_bbc_free(vct->ptr);
-+	vct->capacity = 0;
-+	vct->size = 0;
-+	vct->ptr = 0;
-+}
-+
-+static void vector_add_u8(vector * vct, u8 val)
-+{
-+	if ((vct->size) + sizeof(u8) > (vct->capacity)) {
-+		vector_extend(vct);
-+	}
-+	*(u8 *) ((char *) (vct->ptr) + (vct->size)) = val;
-+	vct->size += sizeof(u8);
-+};
-+
-+static void vector_add_u16(vector * vct, u16 val)
-+{
-+	if ((vct->size) + sizeof(u16) > (vct->capacity)) {
-+		vector_extend(vct);
-+	}
-+	*(u16 *) ((char *) (vct->ptr) + (vct->size)) = val;
-+	vct->size += sizeof(u16);
-+};
-+
-+static void vector_add_u32(vector * vct, u32 val)
-+{
-+	if ((vct->size) + sizeof(u32) > (vct->capacity)) {
-+		vector_extend(vct);
-+	}
-+	*(u32 *) ((char *) (vct->ptr) + (vct->size)) = val;
-+	vct->size += sizeof(u32);
-+};
-+
-+static void vector_add_s8(vector * vct, s8 val)
-+{
-+	if ((vct->size) + sizeof(s8) > (vct->capacity)) {
-+		vector_extend(vct);
-+	}
-+	*(s8 *) ((char *) (vct->ptr) + (vct->size)) = val;
-+	vct->size += sizeof(s8);
-+};
-+
-+static void vector_add_s16(vector * vct, s16 val)
-+{
-+	if ((vct->size) + sizeof(s16) > (vct->capacity)) {
-+		vector_extend(vct);
-+	}
-+	*(s16 *) ((char *) (vct->ptr) + (vct->size)) = val;
-+	vct->size += sizeof(s16);
-+};
-+
-+static void vector_add_s32(vector * vct, s32 val)
-+{
-+	if ((vct->size) + sizeof(s32) > (vct->capacity)) {
-+		vector_extend(vct);
-+	}
-+	*(s32 *) ((char *) (vct->ptr) + (vct->size)) = val;
-+	vct->size += sizeof(s32);
-+};
-+
-+static void vector_add_ptr(vector * vct, void *ptr)
-+{
-+	if ((vct->size) + sizeof(void *) > (vct->capacity)) {
-+		vector_extend(vct);
-+	}
-+	*(void **) ((char *) (vct->ptr) + (vct->size)) = ptr;
-+	vct->size += sizeof(void *);
-+}
-+
-+static void vector_concat(vector * lhs, vector * rhs)
-+{
-+	void *tmp;
-+	if (!(rhs->size)) {
-+		return;
-+	}
-+	tmp = lhs->ptr;
-+	lhs->capacity = (lhs->size) + (rhs->size);
-+	lhs->ptr = jffs2_bbc_malloc(lhs->capacity);
-+	if (tmp) {
-+		memcpy(lhs->ptr, tmp, lhs->size);
-+		jffs2_bbc_free(tmp);
-+	}
-+	memcpy((((u8 *) lhs->ptr) + lhs->size), rhs->ptr, rhs->size);
-+	lhs->size += rhs->size;
-+}
-+
-+#endif
-+
-+//ORIGIN: DataStructures/src/BitVector.c
-+
-+/*******************************************************************************
-+* FILE:     BitVector.c
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+//#include "ipack_common.h"
-+//#include "DataStructures/BitVector.h"
-+#ifndef __KERNEL__
-+#include <memory.h>
-+#endif
-+
-+#define VECTOR_ALLOC_SIZE 0x00001000
-+
-+#ifdef JFFS2_BBC_ARMLIB_MODELGEN
-+
-+static void bitblocks_clear(BitBlocks * this)
-+{
-+	BitVector **it;
-+	void *end_it;
-+	for (it = this->ptr, end_it = VECTOR_P_END(this); it != end_it; it++) {
-+		bitvector_clear(*it);
-+		jffs2_bbc_free(*it);
-+	}
-+	jffs2_bbc_free(this->ptr);
-+	this->ptr = 0;
-+}
-+
-+static void bitvector_clear(BitVector * this)
-+{
-+	if (this->base) {
-+		jffs2_bbc_free(this->base);
-+	}
-+	this->freebits = 0;
-+	this->capacity = 0;
-+	this->size = 0;
-+	this->base = 0;
-+	this->ptr = 0;
-+}
-+
-+static void bitvector_W_reset(BitVector * this)
-+{
-+	this->freebits = 0;
-+	this->capacity = 0;
-+	this->size = 0;
-+	this->base = 0;
-+	this->ptr = 0;
-+}
-+
-+static void bitvector_W_add0(BitVector * this)
-+{
-+	if (!(this->freebits)) {
-+		if (this->size == this->capacity) {
-+			void *tmp = this->base;
-+			this->capacity += VECTOR_ALLOC_SIZE;
-+			this->base = jffs2_bbc_malloc(this->capacity);
-+			this->ptr = ((u8 *) (this->base)) + this->size;
-+			memcpy(this->base, tmp, this->size);
-+			jffs2_bbc_free(tmp);
-+		}
-+		else {
-+			this->ptr++;
-+		}
-+		this->size++;
-+		this->freebits = 7;
-+		*(this->ptr) = 0x00;
-+	}
-+	else {
-+		this->freebits--;
-+		(*(this->ptr)) <<= 1;
-+	}
-+}
-+
-+static void bitvector_W_add1(BitVector * this)
-+{
-+	if (!(this->freebits)) {
-+		if (this->size == this->capacity) {
-+			void *tmp = this->base;
-+			this->capacity += VECTOR_ALLOC_SIZE;
-+			this->base = jffs2_bbc_malloc(this->capacity);
-+			this->ptr = ((u8 *) (this->base)) + this->size;
-+			memcpy(this->base, tmp, this->size);
-+			jffs2_bbc_free(tmp);
-+		}
-+		else {
-+			this->ptr++;
-+		}
-+		this->size++;
-+		this->freebits = 7;
-+		*(this->ptr) = 0x01;
-+	}
-+	else {
-+		this->freebits--;
-+		(*(this->ptr)) <<= 1;
-+		(*(this->ptr)) |= 0x01;
-+	}
-+}
-+
-+static void bitvector_W_concat_b(BitVector * lhs, BitVector * rhs)
-+{
-+	void *tmp;
-+	if (!(rhs->size)) {
-+		return;
-+	}
-+	tmp = lhs->base;
-+	lhs->capacity = ((((lhs->size) + (rhs->size) - 1) / VECTOR_ALLOC_SIZE) + 1) * VECTOR_ALLOC_SIZE;
-+	lhs->base = jffs2_bbc_malloc(lhs->capacity);
-+	if (tmp) {
-+		memcpy(lhs->base, tmp, lhs->size);
-+		jffs2_bbc_free(tmp);
-+	}
-+	memcpy((((u8 *) (lhs->base)) + lhs->size), rhs->base, rhs->size);
-+	lhs->freebits = 0;
-+	lhs->size += rhs->size;
-+	lhs->ptr = ((u8 *) (lhs->base)) + lhs->size;
-+}
-+
-+static void bitvector_W_concat_v(BitVector * lhs, vector * rhs)
-+{
-+	void *tmp;
-+	if (!(rhs->size)) {
-+		return;
-+	}
-+	tmp = lhs->base;
-+	lhs->capacity = ((((lhs->size) + (rhs->size) - 1) / VECTOR_ALLOC_SIZE) + 1) * VECTOR_ALLOC_SIZE;
-+	lhs->base = jffs2_bbc_malloc(lhs->capacity);
-+	if (tmp) {
-+		memcpy(lhs->base, tmp, lhs->size);
-+		jffs2_bbc_free(tmp);
-+	}
-+	memcpy((((u8 *) (lhs->base)) + lhs->size), rhs->ptr, rhs->size);
-+	lhs->freebits = 0;
-+	lhs->size += rhs->size;
-+	lhs->ptr = ((u8 *) (lhs->base)) + lhs->size;
-+}
-+
-+static void bitvector_W_flush(BitVector * this)
-+{
-+	(*(this->ptr)) <<= this->freebits;
-+	this->freebits = 0;
-+}
-+
-+static void bitvector_R_reset(BitVector * this)
-+{
-+	this->freebits = 7;
-+	this->ptr = this->base;
-+}
-+
-+static u8 bitvector_R_get1(BitVector * this)
-+{
-+	u8 tmp = ((*(this->ptr)) >> this->freebits) & 0x01;
-+	if (!(this->freebits)) {
-+		this->freebits = 7;
-+		this->ptr++;
-+	}
-+	else {
-+		this->freebits--;
-+	}
-+	return tmp;
-+}
-+
-+static u8 bitvector_R_get8(BitVector * this)
-+{
-+	u8 tmp = (*(this->ptr));
-+	this->ptr++;
-+	return tmp;
-+}
-+
-+#endif
-+
-+//ORIGIN: DataStructures/src/DecisionTree.c
-+
-+/*******************************************************************************
-+* FILE:     DecisionTree.c
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+//#include "ipack_common.h"
-+//#include "DataStructures/DecisionTree.h"
-+
-+static void decisiontree_delete_node(void *root)
-+{
-+	u8 tmp = GET_NODE_PTR_TYPE(root);
-+	if (TREENODETYPE_IS_NODE_BINARY(tmp)) {
-+		decisiontree_delete_node(((TreeNodeBinary *) root)->left);
-+		decisiontree_delete_node(((TreeNodeBinary *) root)->right);
-+	}
-+	else if ((tmp) == TREENODETYPE_LEAF_P) {
-+		if (((TreeLeafP *) root)->probabilities) {
-+			jffs2_bbc_free(((TreeLeafP *) root)->probabilities);
-+		}
-+	}
-+	else if ((tmp) == TREENODETYPE_LEAF_C) {
-+	}
-+	jffs2_bbc_free(root);
-+}
-+
-+#ifdef JFFS2_BBC_ARMLIB_MODELGEN
-+
-+static void decisiontree_delete(DecisionTree * dt)
-+{
-+	decisiontree_delete_node(dt->root);
-+	jffs2_bbc_free(dt->predictor_max_values);
-+}
-+
-+static void decisiontree_get_probability_for_token(void *root, PredictorType * preds, TokenType token, ProbabilityType * prob)
-+{
-+	void *tmp = root;
-+	while (TREENODETYPE_IS_NODE(((TreeNodeBinary *) tmp)->type)) {
-+		if (((TreeNodeBinary *) tmp)->type == TREENODETYPE_NODE_BINARY_EQ) {
-+			if (preds[((TreeNodeBinary *) tmp)->attribute] TREE_SUBTREE_RELATION_LEFT_EQ((TreeNodeBinary *) tmp)->value) {
-+				tmp = ((TreeNodeBinary *) tmp)->left;
-+			}
-+			else {
-+				tmp = ((TreeNodeBinary *) tmp)->right;
-+			}
-+		}
-+		else if (((TreeNodeBinary *) tmp)->type == TREENODETYPE_NODE_BINARY_LT) {
-+			if (preds[((TreeNodeBinary *) tmp)->attribute] TREE_SUBTREE_RELATION_LEFT_LT((TreeNodeBinary *) tmp)->value) {
-+				tmp = ((TreeNodeBinary *) tmp)->left;
-+			}
-+			else {
-+				tmp = ((TreeNodeBinary *) tmp)->right;
-+			}
-+		}
-+	}
-+	prob->high = 0;
-+	prob->low = 0;
-+	prob->max = 0;
-+	if (((TreeNodeBinary *) tmp)->type == TREENODETYPE_LEAF_P) {
-+		u32 i;
-+		u32 lngth = ((TreeLeafP *) tmp)->pairs << 1;
-+		for (i = 0; i < lngth;) {
-+			TokenType at = ((TreeLeafP *) tmp)->probabilities[i++];
-+			TokenType av = ((TreeLeafP *) tmp)->probabilities[i++];
-+			if (token > at)
-+				prob->low += av;
-+			if (token >= at)
-+				prob->high += av;
-+			prob->max += av;
-+		}
-+	}
-+	else if (((TreeNodeBinary *) tmp)->type == TREENODETYPE_LEAF_C) {
-+		if (((TreeLeafC *) tmp)->predicted_class == token) {
-+			prob->high = TOKEN_MAXVALUE;
-+			prob->max = TOKEN_MAXVALUE;
-+		}
-+	}
-+}
-+
-+static TokenType decisiontree_get_token_for_range(void *root, PredictorType * preds, u32 value, u32 range, ProbabilityType * prob)
-+{
-+	void *tmp = root;
-+	TokenType token = 0;
-+	while (TREENODETYPE_IS_NODE(((TreeNodeBinary *) tmp)->type)) {
-+		if (((TreeNodeBinary *) tmp)->type == TREENODETYPE_NODE_BINARY_EQ) {
-+			if (preds[((TreeNodeBinary *) tmp)->attribute] TREE_SUBTREE_RELATION_LEFT_EQ((TreeNodeBinary *) tmp)->value) {
-+				tmp = ((TreeNodeBinary *) tmp)->left;
-+			}
-+			else {
-+				tmp = ((TreeNodeBinary *) tmp)->right;
-+			}
-+		}
-+		else if (((TreeNodeBinary *) tmp)->type == TREENODETYPE_NODE_BINARY_LT) {
-+			if (preds[((TreeNodeBinary *) tmp)->attribute] TREE_SUBTREE_RELATION_LEFT_LT((TreeNodeBinary *) tmp)->value) {
-+				tmp = ((TreeNodeBinary *) tmp)->left;
-+			}
-+			else {
-+				tmp = ((TreeNodeBinary *) tmp)->right;
-+			}
-+		}
-+	}
-+	prob->high = 0;
-+	prob->low = 0;
-+	prob->max = 0;
-+	if (((TreeNodeBinary *) tmp)->type == TREENODETYPE_LEAF_P) {
-+		u32 i;
-+		u32 norm;
-+		TokenType at = 0;
-+		TokenType av;
-+		u32 lngth = ((TreeLeafP *) tmp)->pairs << 1;
-+		for (i = 0; i < lngth;) {
-+			i++;
-+			prob->max += ((TreeLeafP *) tmp)->probabilities[i++];
-+		}
-+		norm = (value * prob->max - 1) / range;
-+		for (i = 0; prob->high <= norm;) {
-+			at = ((TreeLeafP *) tmp)->probabilities[i++];
-+			av = ((TreeLeafP *) tmp)->probabilities[i++];
-+			prob->high += av;
-+			if (prob->high <= norm)
-+				prob->low += av;
-+		}
-+		token = at;
-+	}
-+	else if (((TreeNodeBinary *) tmp)->type == TREENODETYPE_LEAF_C) {
-+		token = ((TreeLeafC *) tmp)->predicted_class;
-+		prob->high = TOKEN_MAXVALUE;
-+		prob->max = TOKEN_MAXVALUE;
-+	}
-+	return token;
-+}
-+#endif
-+
-+//ORIGIN: DataStructures/src/PredictorTable.c
-+
-+/*******************************************************************************
-+* FILE:     PredictorTable.c
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+//#include "ipack_common.h"
-+//#include "DataStructures/PredictorTable.h"
-+
-+#ifdef JFFS2_BBC_ARMLIB_MODELGEN
-+
-+static void predictortable_clear(PredictorTable * table)
-+{
-+	table->predictors = 0;
-+}
-+
-+static void predictortable_free(PredictorTable * table)
-+{
-+	if (table->predictors) {
-+		jffs2_bbc_free(table->predictors);
-+		table->predictors = 0;
-+	}
-+}
-+
-+static void predictortable_resetARM(PredictorTable * table)
-+{
-+	register PredictorType *ptr = table->predictors;
-+	register PredictorType *end = ptr + NUMBER_OF_PREDICTORS_ARM;
-+	while (ptr < end) {
-+		*(ptr++) = 0;
-+	}
-+}
-+
-+static void predictortable_updateARM(PredictorTable * table, TokenType token)
-+{
-+	register PredictorType *ptr = table->predictors;
-+	register u32 ndx = ptr[0] + 1;
-+	ptr[ndx + 8] = ptr[ndx];
-+	ptr[ndx] = token;
-+	if (ndx == 8) {
-+		ptr[0] = 0;
-+	}
-+	else {
-+		++ptr[0];
-+	}
-+}
-+
-+static PredictorType predictortable_minvalueARM(PredictorTable * table, u32 index)
-+{
-+	return 0;
-+}
-+
-+static PredictorType predictortable_maxvalueARM(PredictorTable * table, u32 index)
-+{
-+	if (index == 0) {
-+		return 7;
-+	}
-+	else {
-+		return 15;
-+	}
-+}
-+
-+#endif
-+
-+#ifndef __KERNEL__
-+
-+/*static void predictortable_resetTXT(PredictorTable * table)
-+{
-+	register PredictorType *ptr = table->predictors;
-+	register PredictorType *end = ptr + NUMBER_OF_PREDICTORS_TXT;
-+	while (ptr < end) {
-+		*(ptr++) = 0;
-+	}
-+}
-+
-+static void predictortable_updateTXT(PredictorTable * table, TokenType token)
-+{				//TODO: modify
-+	register PredictorType *ptr = table->predictors;
-+//        register u32            ndx;
-+	ptr[0] = token;
-+	if ((('a' <= token) && (token <= 'z')) || (('A' <= token) && (token <= 'Z'))) {
-+		++(ptr[1]);
-+	}
-+	else {
-+		ptr[1] = 0;
-+	}
-+}
-+
-+static PredictorType predictortable_minvalueTXT(PredictorTable * table, u32 index)
-+{
-+	return 0;
-+}
-+
-+static PredictorType predictortable_maxvalueTXT(PredictorTable * table, u32 index)
-+{				//TODO: modify
-+	return 254;
-+}*/
-+
-+#endif // __KERNEL__
-+
-+//ORIGIN: DataStructures/src/ipack_model.c
-+
-+/*******************************************************************************
-+* FILE:     ipack_model.c
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+//#include "DataStructures/ipack_model.h"
-+//#include "measuredef.h"
-+//#include "ipack_common.h"
-+
-+#ifdef __MEASURE_TIME_MODEL_GETPROB
-+#define __MT_P_MAX 256
-+#define __MT_P_DIV 128
-+#define __MT_P_MIN 0
-+#endif
-+
-+static void ipack_model_get_probability_for_token(ipack_nodetype * tmp, TokenType token, ipack_probability_type * prob)
-+{
-+//        register ipack_nodetype* tmp = model->tree_root_ptr;
-+//        register ipack_nodetype* tmp = root;
-+	while (TREENODETYPE_IS_NODE(tmp->type)) {
-+		if (tmp->type == TREENODETYPE_NODE_BINARY_EQ) {
-+			if (*(tmp->data.nodeBin.attribute_ptr) TREE_SUBTREE_RELATION_LEFT_EQ tmp->data.nodeBin.value) {
-+				((char *) tmp) += sizeof(tmp->type) + sizeof(ipack_treenodeBin);
-+			}
-+			else {
-+				tmp = tmp->data.nodeBin.right_child_ptr;
-+			}
-+		}
-+		else if (tmp->type == TREENODETYPE_NODE_BINARY_LT) {
-+			if (*(tmp->data.nodeBin.attribute_ptr) TREE_SUBTREE_RELATION_LEFT_LT tmp->data.nodeBin.value) {
-+				((char *) tmp) += sizeof(tmp->type) + sizeof(ipack_treenodeBin);
-+			}
-+			else {
-+				tmp = tmp->data.nodeBin.right_child_ptr;
-+			}
-+		}
-+	}
-+	prob->high = 0;
-+	prob->low = 0;
-+//        prob->max  = 0;
-+	if (tmp->type == TREENODETYPE_LEAF_P) {
-+		if (token) {
-+			prob->low = tmp->data.leafP.probabilities[token - 1];
-+		}
-+		prob->high = tmp->data.leafP.probabilities[token];
-+//                prob->max  = tmp->data.leafP.probabilities[15];
-+	}
-+	else if (tmp->type == TREENODETYPE_LEAF_C) {
-+		if (tmp->data.leafC.predicted_class == token) {
-+			prob->high = TOKEN_MAXVALUE;
-+//                        prob->max  = TOKEN_MAXVALUE;
-+		}
-+	}
-+}
-+
-+#ifndef IPACK_ARM_ASM
-+
-+//return ipack_model_get_token_for_range2(tmp,value,range,prob);
-+
-+static TokenType ipack_model_get_token_for_range(ipack_nodetype * tmp, u32 value, u32 range, ipack_probability_type * prob)
-+{
-+//        register ipack_nodetype* tmp   = model->tree_root_ptr;
-+//        register ipack_nodetype* tmp   = root;
-+	register TokenType token = 0;
-+	while (TREENODETYPE_IS_NODE(tmp->type)) {
-+		if (tmp->type == TREENODETYPE_NODE_BINARY_EQ) {
-+			if (*(tmp->data.nodeBin.attribute_ptr) TREE_SUBTREE_RELATION_LEFT_EQ tmp->data.nodeBin.value) {
-+				((char *) tmp) += sizeof(tmp->type) + sizeof(ipack_treenodeBin);
-+			}
-+			else {
-+				tmp = tmp->data.nodeBin.right_child_ptr;
-+			}
-+		}
-+		else if (tmp->type == TREENODETYPE_NODE_BINARY_LT) {
-+			if (*(tmp->data.nodeBin.attribute_ptr) TREE_SUBTREE_RELATION_LEFT_LT tmp->data.nodeBin.value) {
-+				((char *) tmp) += sizeof(tmp->type) + sizeof(ipack_treenodeBin);
-+			}
-+			else {
-+				tmp = tmp->data.nodeBin.right_child_ptr;
-+			}
-+		}
-+	}
-+	prob->high = 0;
-+	prob->low = 0;
-+//        prob->max  = 0;
-+	if (tmp->type == TREENODETYPE_LEAF_P) {
-+		u32 i;
-+		u32 norm;
-+//                prob->max = tmp->data.leafP.probabilities[15];
-+/*                norm = (value * prob->max -1)/range;
-+                for(i = 0; i < 15; ++i) {
-+                        if(tmp->data.leafP.probabilities[i] > norm) {
-+                                break;
-+                        }
-+                }*/
-+		norm = ((value << PROBABILITY_SHIFT) - 1);
-+		for (i = 0; i < NUMBER_OF_TOKENS; ++i) {
-+			if (range * tmp->data.leafP.probabilities[i] > norm) {
-+				break;
-+			}
-+		}
-+		token = (TokenType) i;
-+		prob->high = tmp->data.leafP.probabilities[i];
-+		if (token) {
-+			prob->low = tmp->data.leafP.probabilities[token - 1];
-+		}
-+	}
-+	else if (tmp->type == TREENODETYPE_LEAF_C) {
-+		token = tmp->data.leafC.predicted_class;
-+		prob->high = PROBABILITY_MAX;
-+//                prob->max  = PROBABILITY_MAX;
-+	}
-+	return token;
-+}
-+#endif
-+/*
-+void ipack_model_predictortable_reset(PredictorType* ptr)
-+{
-+//        register PredictorType* ptr = model->predictors_ptr;
-+//        register PredictorType* ptr = preds;
-+        register PredictorType* end = ptr + NUMBER_OF_PREDICTORS;
-+        while(ptr < end) {
-+                *(ptr++) = 0;
-+        }
-+}
-+
-+void ipack_model_predictortable_update(PredictorType* ptr, TokenType token)
-+{
-+//        register PredictorType* ptr = model->predictors_ptr;
-+//        register PredictorType* ptr = preds;
-+        register u32            ndx = ptr[0] + 1;
-+        ptr[ndx + 8] = ptr[ndx];
-+        ptr[ndx]     = token;
-+        if(ndx == 8) {
-+                ptr[0] = 0;
-+        } else {
-+                ++ ptr[0];
-+        }
-+}*/
-+/****************************************************************************/
-+
-+#ifndef __KERNEL__
-+static void ipack_model_countpreds(void *ptr, ipack_nodetype * node, double *table, double val)
-+{
-+	if ((node->type == TREENODETYPE_NODE_BINARY_EQ) || (node->type == TREENODETYPE_NODE_BINARY_LT)) {
-+		table[(u32) (node->data.nodeBin.attribute_ptr) - (u32) (ptr)] += val;
-+		ipack_model_countpreds(ptr, (void *) (((u8 *) (node)) + sizeof(node->type) + sizeof(ipack_treenodeBin)), table, val / 2);
-+		ipack_model_countpreds(ptr, node->data.nodeBin.right_child_ptr, table, val / 2);
-+	}
-+	else {
-+	}
-+}
-+
-+/*static void ipack_model_printinfo(ipack_model_type * model)
-+{
-+	double *prcnt = jffs2_bbc_malloc(sizeof(double) * NUMBER_OF_PREDICTORS);
-+	u32 i;
-+	for (i = 0; i < NUMBER_OF_PREDICTORS; i++) {
-+		prcnt[i] = 0.0;
-+	}
-+	ipack_model_countpreds(model->predictors_ptr, model->tree_root_ptr, prcnt, 100);
-+	for (i = 0; i < NUMBER_OF_PREDICTORS; i++) {
-+		jffs2_bbc_print3("        p[%3d] = %10.6lf\n", (int) i, prcnt[i]);
-+	}
-+	jffs2_bbc_free(prcnt);
-+}*/
-+
-+static void ipack_dumpnode(unsigned char **ptr, FILE * file, char *prefs)
-+{
-+	switch (*((*ptr)++)) {
-+		u32 i;
-+		u32 j;
-+		u32 x;
-+		u32 y;
-+	case TREENODETYPE_NODE_BINARY_EQ:
-+		x = *((*ptr)++);
-+		y = *((*ptr)++);
-+		fprintf(file, "%s+->\tBinary node: P[%u] equals %u\n", prefs, (unsigned int)x, (unsigned int)y);
-+		for (j = 0; j < 4096 && prefs[j]; ++j);
-+		prefs[j] = '\t';
-+		prefs[++j] = '|';
-+		ipack_dumpnode(ptr, file, prefs);
-+		prefs[j--] = 0;
-+		ipack_dumpnode(ptr, file, prefs);
-+		prefs[j] = 0;
-+		break;
-+	case TREENODETYPE_NODE_BINARY_LT:
-+		x = *((*ptr)++);
-+		y = *((*ptr)++);
-+		fprintf(file, "%s+->\tBinary node: P[%u] greater than %u\n", prefs, (unsigned int)x, (unsigned int)y);
-+		for (j = 0; j < 4096 && prefs[j]; ++j);
-+		prefs[j] = '\t';
-+		prefs[++j] = '|';
-+		ipack_dumpnode(ptr, file, prefs);
-+		prefs[j--] = 0;
-+		ipack_dumpnode(ptr, file, prefs);
-+		prefs[j] = 0;
-+		break;
-+	case TREENODETYPE_LEAF_P:
-+		x = *((*ptr)++);
-+		fprintf(file, "%s+->\tLeaf: %u pairs\n", prefs, (unsigned int)x);
-+		(*ptr) += (x << 1);
-+		break;
-+	case TREENODETYPE_LEAF_C:
-+		x = *((*ptr)++);
-+		fprintf(file, "%s+->\tLeaf: class %u\n", prefs, (unsigned int)x);
-+		break;
-+	default:
-+		fprintf(file, "%s+->\tLeaf: nullnode\n", prefs);
-+	}
-+}
-+
-+/*static void ipack_dumpmodel(void *model)
-+{
-+	unsigned char *tmp_ptr = model;
-+	FILE *file;
-+	char C[4096];
-+	if ((file = fopen("DUMPED_MODEL", "wa"))) {
-+		int i;
-+		for (i = 0; i < 4096; C[i++] = 0);
-+		tmp_ptr += 8;
-+		tmp_ptr += sizeof(u32);
-+		ipack_dumpnode(&tmp_ptr, file, C);
-+		fclose(file);
-+	}
-+}*/
-+
-+#endif
-+
-+//ORIGIN: Builders/src/PredictorGenerator.c
-+
-+/*******************************************************************************
-+* FILE:     PredictorGenerator.c
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+//#include "ipack_common.h"
-+//#include "Builders/PredictorGenerator.h"
-+
-+#ifdef JFFS2_BBC_ARMLIB_MODELGEN
-+static PredictorTable *predictorgenerator_generate( /*PredictorGeneratorSettings* settings */ )
-+{
-+	PredictorTable *ptr = jffs2_bbc_malloc(sizeof(PredictorTable));
-+	predictortable_clear(ptr);
-+	ptr->predictors = jffs2_bbc_malloc(NUMBER_OF_PREDICTORS * sizeof(PredictorType));
-+	return ptr;
-+}
-+#endif
-+
-+//ORIGIN: Builders/src/ipack_armlib_compressor.c
-+
-+/*******************************************************************************
-+* FILE:     ipack_armlim_compressor.c
-+* AUTHOR:   Tamás Gergely
-+* MODIFIED: $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*******************************************************************************/
-+
-+//#include "ipack_common.h"
-+//#include "DataStructures.h"
-+//#include "Builders/PredictorGenerator.h"
-+//#include "Builders/Tokenizer.h"
-+//#include "Builders/Coder.h"
-+
-+#define EC_NO_ERROR                      0
-+#define EC_NOT_IPMF_FILE                -1
-+#define EC_NOT_IPMF_MODEL               -2
-+#define EC_NOT_HG_BLOCK                 -3
-+#define EC_WRONG_INPUT_LENGTH         -501
-+#define EC_CODER_WRONG_PROBABILITY       1
-+#define EC_CODER_WRONG_RANGE             2
-+#define EC_BUFFER_OVERFLOW             501
-+#define EC_BUFFER_UNDERFLOW            502
-+#define EC_UNKNOWN_TOKEN_TYPE         1001
-+#define EC_UNKNOWN_FILTER             1002
-+#define EC_UNKNOWN_CONVERTER          1003
-+#define EC_UNKNOWN_MANIPULATOR        1004
-+
-+/*******************************************************************************
-+
-+        COMPRESSOR INIT FUNCTIONS
-+
-+*******************************************************************************/
-+
-+#define ROUND_UP_TO_DWORD(val) ( ( (val) + 3 ) & 0xfffffffc )
-+
-+#ifndef __KERNEL__
-+int ipack_glb_endian_X;
-+#endif
-+
-+static int ipack_compressor_init_tree(unsigned char **ptr, ipack_model_type * model, ipack_nodetype * node, void *nullnode)
-+{
-+	int retval = 0;
-+	node->type = *((*ptr)++);
-+	switch (node->type) {
-+		u32 i;
-+		u32 j;
-+		u32 lngth;
-+		u32 tmpret;
-+		TokenType at;
-+		u16 av;
-+	case TREENODETYPE_NODE_BINARY_EQ:
-+	case TREENODETYPE_NODE_BINARY_LT:
-+		node->data.nodeBin.attribute_ptr = (model->predictors_ptr) + (*((*ptr)++));
-+		node->data.nodeBin.value = *((*ptr)++);
-+		retval = sizeof(node->data.nodeBin);
-+		retval += ipack_compressor_init_tree(ptr, model, (void *) ROUND_UP_TO_DWORD(((u32) node) + sizeof(node->type) + sizeof(node->data.nodeBin)), nullnode);
-+		node->data.nodeBin.right_child_ptr = (void *) ROUND_UP_TO_DWORD(((u32) node) + retval + sizeof(node->type));
-+		retval += ipack_compressor_init_tree(ptr, model, node->data.nodeBin.right_child_ptr, nullnode);
-+		break;
-+	case TREENODETYPE_LEAF_P:
-+		lngth = *((*ptr)++);
-+		av = 0;
-+		for (i = 0, j = 0; i < lngth; ++i) {
-+			at = *((*ptr)++);
-+			while (j < at) {
-+				node->data.leafP.probabilities[j++] = av;
-+			}
-+			av += *((*ptr)++);
-+		}
-+		while (j < NUMBER_OF_TOKENS) {
-+			node->data.leafP.probabilities[j++] = av;
-+		}
-+		for (i = 0; i < NUMBER_OF_TOKENS; ++i) {
-+			node->data.leafP.probabilities[i] = ((node->data.leafP.probabilities[i] << PROBABILITY_SHIFT) / node->data.leafP.probabilities[NUMBER_OF_TOKENS - 1]);
-+		}
-+		retval = ROUND_UP_TO_DWORD(NUMBER_OF_TOKENS * sizeof(u16));
-+		break;
-+	case TREENODETYPE_LEAF_C:
-+		node->data.leafC.predicted_class = *((*ptr)++);
-+		retval = sizeof(node->data.leafC);
-+		retval = ROUND_UP_TO_DWORD(retval);
-+		break;
-+	default:
-+		return 0;
-+	}
-+	return retval + sizeof(node->type);
-+}
-+
-+#define IPACK_TREE_CONVERT_REPLACE 0
-+#define IPACK_TREE_CONVERT_KEEP    1
-+
-+static void *ipack_tree_to_code(ipack_model_type * model, int *code_size);
-+
-+static int ipack_armlib_convert_tree_to_code(ipack_model_type * model_img, int mode)
-+{
-+#ifdef IPACK_TREE_TO_CODE
-+	int tree_size;
-+
-+	model_img->tree_code = ipack_tree_to_code(model_img, &tree_size);
-+	jffs2_bbc_print2("Convertation done. Code size=%d\n", tree_size);
-+	if (mode == IPACK_TREE_CONVERT_REPLACE) {
-+		jffs2_bbc_print1("Freeing original tree.\n");
-+		jffs2_bbc_free(model_img->tree_root_ptr);
-+		model_img->tree_root_ptr = NULL;
-+	}
-+#endif	
-+	return 0;
-+}
-+
-+
-+static int ipack_armlib_compressor_init(void **model)
-+{
-+	int retval = EC_NO_ERROR;
-+	unsigned char *tmp_ptr = *model;
-+	u32 i;
-+	ipack_model_type *model_img;
-+	char tmp_c[2];
-+
-+	if (*(tmp_ptr++) != 'i') {
-+		return EC_NOT_IPMF_FILE;
-+	}
-+	else if (*(tmp_ptr++) != 'P') {
-+		return EC_NOT_IPMF_FILE;
-+	}
-+	else if (*(tmp_ptr++) != 'M') {
-+		return EC_NOT_IPMF_FILE;
-+	}
-+	else if (*(tmp_ptr++) != 'F') {
-+		return EC_NOT_IPMF_FILE;
-+	}
-+	tmp_c[0] = *(tmp_ptr++);
-+	tmp_c[1] = *(tmp_ptr++);
-+	tmp_ptr += 2;
-+
-+	//model_img = jffs2_bbc_malloc(*((u32*)tmp_ptr));
-+	model_img = jffs2_bbc_malloc(sizeof(ipack_model_type) + ROUND_UP_TO_DWORD(NUMBER_OF_PREDICTORS));
-+	model_img->tree_root_ptr = jffs2_bbc_malloc(*((u32 *) tmp_ptr));	//it is smaller a little but, but...
-+
-+	tmp_ptr += sizeof(u32);
-+
-+	model_img->ID[0] = 'i';
-+	model_img->ID[1] = 'P';
-+	model_img->ID[2] = 'M';
-+	model_img->ID[3] = 'F';
-+
-+	model_img->block_sign[0] = tmp_c[0];
-+	model_img->block_sign[1] = tmp_c[1];
-+
-+	model_img->nullnode.type = TREENODETYPE_LEAF_P;
-+	for (i = 0; i < NUMBER_OF_TOKENS; ++i) {
-+		model_img->nullnode.probabilities[i] = 0;
-+	}
-+	model_img->predictors_ptr = (void *) (((u32) model_img) + sizeof(ipack_model_type));
-+	//model_img->tree_root_ptr  = (void*)ROUND_UP_TO_DWORD(((u32)(model_img->predictors_ptr)) + NUMBER_OF_PREDICTORS);//ALIGN
-+
-+	ipack_compressor_init_tree(&tmp_ptr, model_img, model_img->tree_root_ptr, &(model_img->nullnode));
-+
-+#ifdef IPACK_TREE_TO_CODE
-+#ifdef IPACK_AUTO_TREE_TO_CODE
-+	jffs2_bbc_print1("Automatically converting tree to ARM code...\n");
-+	ipack_armlib_convert_tree_to_code(model_img, IPACK_TREE_CONVERT_REPLACE);
-+#else
-+	model_img->tree_code = NULL;
-+#endif
-+#else
-+	model_img->tree_code = NULL;
-+#endif
-+
-+	jffs2_bbc_free(*model);
-+	*model = model_img;
-+	return retval;
-+}
-+
-+/*******************************************************************************
-+
-+        COMPRESSOR DEINIT FUNCTIONS
-+
-+*******************************************************************************/
-+
-+
-+/* Descructor of compressor (model will be freed with jffs2_bbc_free() after it)*/
-+static void ipack_armlib_compressor_deinit(void)
-+{
-+}
-+
-+/*******************************************************************************
-+
-+        COMPRESS FUNCTIONS
-+
-+*******************************************************************************/
-+
-+static int writebits0(unsigned char **dest, u8 * freebits, u32 * opposite, unsigned char *end)
-+{
-+	if (!(*freebits)) {
-+		++(*dest);
-+		*freebits = 7;
-+		**dest = 0x00;
-+	}
-+	else {
-+		--(*freebits);
-+		(**dest) <<= 1;
-+	}
-+	if ((*dest == end) && !(*freebits)) {
-+		return EC_BUFFER_OVERFLOW;
-+	}
-+	while (*opposite) {
-+		--(*opposite);
-+		if (!(*freebits)) {
-+			++(*dest);
-+			*freebits = 7;
-+			**dest = 0x01;
-+		}
-+		else {
-+			--(*freebits);
-+			(**dest) <<= 1;
-+			(**dest) |= 0x01;
-+		}
-+		if ((*dest == end) && !(*freebits)) {
-+			return EC_BUFFER_OVERFLOW;
-+		}
-+	}
-+	return 0;
-+}
-+
-+static int writebits1(unsigned char **dest, u8 * freebits, u32 * opposite, unsigned char *end)
-+{
-+	if (!(*freebits)) {
-+		++(*dest);
-+		*freebits = 7;
-+		**dest = 0x01;
-+	}
-+	else {
-+		--(*freebits);
-+		(**dest) <<= 1;
-+		(**dest) |= 0x01;
-+	}
-+	if ((*dest == end) && !(*freebits)) {
-+		return EC_BUFFER_OVERFLOW;
-+	}
-+	while (*opposite) {
-+		--(*opposite);
-+		if (!(*freebits)) {
-+			++(*dest);
-+			*freebits = 7;
-+			**dest = 0x00;
-+		}
-+		else {
-+			--(*freebits);
-+			(**dest) <<= 1;
-+		}
-+		if ((*dest == end) && !(*freebits)) {
-+			return EC_BUFFER_OVERFLOW;
-+		}
-+	}
-+	return 0;
-+}
-+
-+
-+
-+
-+/* Compress block
-+ *   *dstlen bytes are allocated.
-+ *   if it is not enough write *sourcelen over to the processed amount of data
-+ *   returns non zero if fails
-+ */
-+static int ipack_armlib_compress(void *model, unsigned char *input, unsigned char *output, unsigned long *sourcelen, unsigned long *dstlen)
-+{
-+	register u32 coder_high = CODER_VALUEMAX - 1;
-+	register u32 coder_low = 0;
-+	u32 coder_opbits = 0;
-+	u8 bitvector_freebits = 8;
-+	unsigned char *bitvector_ptr = output;
-+	unsigned char *bitvector_end = output + (*dstlen - 1);
-+	ARM_DataType *tmpp;
-+	TokenStream tmpv;
-+	TokenType *it;
-+	void *end_it;
-+
-+	ipack_nodetype *treeroot = ((ipack_model_type *) model)->tree_root_ptr;
-+	PredictorType *predctrs = ((ipack_model_type *) model)->predictors_ptr;
-+
-+#ifdef IPACK_TREE_TO_CODE
-+	void (*treefunc) (ipack_nodetype *, TokenType, ipack_probability_type *);
-+
-+	treefunc = ((ipack_model_type *) model)->tree_code;
-+	if (treefunc != NULL)
-+		treefunc += 4;
-+#endif
-+
-+	if ((*sourcelen % 4) != 0) {
-+		return EC_WRONG_INPUT_LENGTH;
-+	}
-+	if (*dstlen <= 4) {
-+		return EC_BUFFER_OVERFLOW;
-+	}
-+
-+	if (((ipack_model_type *) model)->ID[0] != 'i') {
-+		return EC_NOT_IPMF_MODEL;
-+	}
-+	else if (((ipack_model_type *) model)->ID[1] != 'P') {
-+		return EC_NOT_IPMF_MODEL;
-+	}
-+	else if (((ipack_model_type *) model)->ID[2] != 'M') {
-+		return EC_NOT_IPMF_MODEL;
-+	}
-+	else if (((ipack_model_type *) model)->ID[3] != 'F') {
-+		return EC_NOT_IPMF_MODEL;
-+	}
-+#ifdef TXT_TOKENS
-+	tmpv.capacity = (*sourcelen);
-+#else
-+	tmpv.capacity = (*sourcelen) << 1;
-+#endif
-+	tmpv.size = tmpv.capacity;
-+	tmpv.ptr = jffs2_bbc_malloc(tmpv.size);
-+	it = tmpv.ptr;
-+
-+#ifndef __KERNEL__
-+	if (ipack_glb_endian_X) {
-+		for (tmpp = (void *) input; (u32) tmpp < (u32) (input + *sourcelen); ++tmpp) {
-+#ifdef TXT_TOKENS
-+			*(it++) = (u8) ((*tmpp & 0xff000000) >> 24);
-+			*(it++) = (u8) ((*tmpp & 0x00ff0000) >> 16);
-+			*(it++) = (u8) ((*tmpp & 0x0000ff00) >> 8);
-+			*(it++) = (u8) ((*tmpp & 0x000000ff));
-+#else
-+			*(it++) = (u8) ((*tmpp & 0x0000f000) >> 12);
-+			*(it++) = (u8) ((*tmpp & 0x0000000f));
-+			*(it++) = (u8) ((*tmpp & 0xf0000000) >> 28);
-+			*(it++) = (u8) ((*tmpp & 0x000f0000) >> 16);
-+			*(it++) = (u8) ((*tmpp & 0x00000f00) >> 8);
-+			*(it++) = (u8) ((*tmpp & 0x00f00000) >> 20);
-+			*(it++) = (u8) ((*tmpp & 0x0f000000) >> 24);
-+			*(it++) = (u8) ((*tmpp & 0x000000f0) >> 4);
-+#endif //TXT_TOKENS
-+		}
-+	}
-+	else {
-+#endif
-+		for (tmpp = (void *) input; (u32) tmpp < (u32) (input + *sourcelen); ++tmpp) {
-+#ifdef TXT_TOKENS
-+			*(it++) = (u8) ((*tmpp & 0x000000ff));
-+			*(it++) = (u8) ((*tmpp & 0x0000ff00) >> 8);
-+			*(it++) = (u8) ((*tmpp & 0x00ff0000) >> 16);
-+			*(it++) = (u8) ((*tmpp & 0xff000000) >> 24);
-+#else
-+			*(it++) = (u8) ((*tmpp & 0x00f00000) >> 20);
-+			*(it++) = (u8) ((*tmpp & 0x0f000000) >> 24);
-+			*(it++) = (u8) ((*tmpp & 0x000000f0) >> 4);
-+			*(it++) = (u8) ((*tmpp & 0x00000f00) >> 8);
-+			*(it++) = (u8) ((*tmpp & 0x000f0000) >> 16);
-+			*(it++) = (u8) ((*tmpp & 0x0000f000) >> 12);
-+			*(it++) = (u8) ((*tmpp & 0x0000000f));
-+			*(it++) = (u8) ((*tmpp & 0xf0000000) >> 28);
-+#endif //TXT_TOKENS
-+		}
-+#ifndef __KERNEL__
-+	}
-+#endif
-+/*
-+        ENCODE
-+*/
-+	{			//predictor reset
-+		register PredictorType *ptr = predctrs;
-+		register PredictorType *end = ptr + NUMBER_OF_PREDICTORS;
-+		while (ptr < end) {
-+			*(ptr++) = 0;
-+		}
-+	}
-+
-+	//*(bitvector_ptr++) = 'H';
-+	//*(bitvector_ptr++) = 'G';
-+	*(bitvector_ptr++) = ((ipack_model_type *) model)->block_sign[0];
-+	*(bitvector_ptr++) = ((ipack_model_type *) model)->block_sign[1];
-+
-+	*(bitvector_ptr++) = (unsigned char) (((*sourcelen) >> 8) & 0xff);
-+	*(bitvector_ptr++) = (unsigned char) ((*sourcelen) & 0xff);
-+	for (it = tmpv.ptr, end_it = VECTOR_S_END(tmpv); it != end_it; ++it) {
-+		ipack_probability_type prob;
-+		u32 range;
-+
-+#ifdef IPACK_TREE_TO_CODE
-+		if (treefunc != NULL)
-+			(*treefunc) (treeroot, *it, &prob);
-+		else
-+			ipack_model_get_probability_for_token(treeroot, *it, &prob);
-+#else
-+		ipack_model_get_probability_for_token(treeroot, *it, &prob);
-+#endif
-+
-+		if (prob.high == prob.low) {
-+			vector_clear(&tmpv);
-+			return EC_CODER_WRONG_PROBABILITY;
-+		}
-+		range = coder_high - coder_low + 1;
-+		coder_high = coder_low + ((range * prob.high) >> PROBABILITY_SHIFT) - 1;
-+		coder_low += ((range * prob.low) >> PROBABILITY_SHIFT);
-+		for (;;) {
-+			if (coder_high < CODER_VALUEHLF) {
-+				if (writebits0(&bitvector_ptr, &bitvector_freebits, &coder_opbits, bitvector_end)) {
-+					vector_clear(&tmpv);
-+					return EC_BUFFER_OVERFLOW;
-+				}
-+			}
-+			else if (coder_low >= CODER_VALUEHLF) {
-+				if (writebits1(&bitvector_ptr, &bitvector_freebits, &coder_opbits, bitvector_end)) {
-+					vector_clear(&tmpv);
-+					return EC_BUFFER_OVERFLOW;
-+				}
-+				coder_high -= CODER_VALUEHLF;
-+				coder_low -= CODER_VALUEHLF;
-+			}
-+			else if ((CODER_VALUE1ST <= coder_low) && (coder_high < CODER_VALUE3RD)) {
-+				++coder_opbits;
-+				coder_high -= CODER_VALUE1ST;
-+				coder_low -= CODER_VALUE1ST;
-+			}
-+			else {
-+				break;
-+			}
-+			coder_high <<= 1;
-+			++coder_high;
-+			coder_low <<= 1;
-+			if (coder_high < coder_low) {
-+				vector_clear(&tmpv);
-+				return EC_CODER_WRONG_RANGE;
-+			}
-+		}
-+		{
-+#ifdef TXT_TOKENS
-+//                        register u32 ndx;
-+			predctrs[0] = *it;
-+			if ((('a' <= *it) && (*it <= 'z')) || (('A' <= *it) && (*it <= 'Z'))) {
-+				++(predctrs[1]);
-+			}
-+			else {
-+				predctrs[1] = 0;
-+			}
-+#else
-+			register u32 ndx = predctrs[0] + 1;
-+			predctrs[ndx + 8] = predctrs[ndx];
-+			predctrs[ndx] = *it;
-+			if (ndx == 8) {
-+				predctrs[0] = 0;
-+			}
-+			else {
-+				++predctrs[0];
-+			}
-+#endif
-+		}
-+
-+	}
-+	vector_clear(&tmpv);
-+	++coder_opbits;
-+	if (coder_low < CODER_VALUE1ST) {
-+		if (writebits0(&bitvector_ptr, &bitvector_freebits, &coder_opbits, bitvector_end)) {
-+			return EC_BUFFER_OVERFLOW;
-+		}
-+	}
-+	else {
-+		if (writebits1(&bitvector_ptr, &bitvector_freebits, &coder_opbits, bitvector_end)) {
-+			return EC_BUFFER_OVERFLOW;
-+		}
-+	}
-+	(*(bitvector_ptr)) <<= bitvector_freebits;
-+	*dstlen = ((u32) bitvector_ptr - (u32) output + 1);
-+	return EC_NO_ERROR;
-+}
-+
-+/*******************************************************************************
-+
-+        DECOMPRESS FUNCTIONS
-+
-+*******************************************************************************/
-+
-+typedef struct
-+{
-+	u32 high;
-+	u32 low;
-+	u32 value;
-+	u32 overread;
-+} ipack_decompressor_values;
-+
-+typedef struct
-+{
-+	u8 freebits;
-+	unsigned char *ptr;
-+	unsigned char *end;
-+} ipack_decompressor_bitvector;
-+
-+static u8 ipack_bitvector_R_get1(ipack_decompressor_bitvector * bv)
-+{
-+	u8 tmp;
-+	if (bv->ptr == bv->end) {
-+		bv->freebits = 0;
-+		return 0;
-+	}
-+	tmp = (*(bv->ptr) >> bv->freebits) & 0x01;
-+	if (!(bv->freebits)) {
-+		bv->freebits = 7;
-+		++(bv->ptr);
-+	}
-+	else {
-+		--(bv->freebits);
-+	}
-+	return tmp;
-+}
-+
-+/* Decompress block 
-+ *   returns non zero if fails
-+ */
-+static int ipack_armlib_decompress(void *model, unsigned char *input, unsigned char *output, unsigned long sourcelen, unsigned long dstlen)
-+{
-+	ARM_DataType *data;
-+	register u32 coder_high = CODER_VALUEMAX - 1;
-+	register u32 coder_low = 0;
-+	register u32 coder_value = 0;
-+	u32 coder_overread = 0;
-+	ipack_decompressor_bitvector bitvector;
-+	u32 lngth;
-+	u32 i;
-+	u32 cntbytes;
-+	TokenType tkns[8];
-+	TokenType *tptr;
-+
-+	ipack_nodetype *treeroot = ((ipack_model_type *) model)->tree_root_ptr;
-+	PredictorType *predctrs = ((ipack_model_type *) model)->predictors_ptr;
-+
-+#ifdef IPACK_TREE_TO_CODE
-+	TokenType(*treefunc) (ipack_nodetype *, u32, u32, ipack_probability_type *);
-+
-+	treefunc = ((ipack_model_type *) model)->tree_code;
-+#endif
-+
-+
-+	if (((ipack_model_type *) model)->ID[0] != 'i') {
-+		return EC_NOT_IPMF_MODEL;
-+	}
-+	else if (((ipack_model_type *) model)->ID[1] != 'P') {
-+		return EC_NOT_IPMF_MODEL;
-+	}
-+	else if (((ipack_model_type *) model)->ID[2] != 'M') {
-+		return EC_NOT_IPMF_MODEL;
-+	}
-+	else if (((ipack_model_type *) model)->ID[3] != 'F') {
-+		return EC_NOT_IPMF_MODEL;
-+	}
-+
-+	bitvector.freebits = 7;
-+	bitvector.ptr = input;
-+	bitvector.end = input + sourcelen;
-+
-+	/*if(*(bitvector.ptr++) != 'H') {
-+	   return EC_NOT_HG_BLOCK;
-+	   } else if(*(bitvector.ptr++) != 'G') {
-+	   return EC_NOT_HG_BLOCK;
-+	   } */
-+	bitvector.ptr++;
-+	bitvector.ptr++;
-+
-+	data = (void *) output;
-+	cntbytes = *(bitvector.ptr++);
-+	cntbytes <<= 8;
-+	cntbytes += *(bitvector.ptr++);
-+
-+	{			//predictor reset
-+		register PredictorType *ptr = predctrs;
-+		register PredictorType *end = ptr + NUMBER_OF_PREDICTORS;
-+		while (ptr < end) {
-+			*(ptr++) = 0;
-+		}
-+	}
-+	for (i = 0; i < CODER_VALUEBITS; ++i) {
-+		coder_value <<= 1;
-+		coder_value += ipack_bitvector_R_get1(&bitvector);
-+	}
-+	lngth = dstlen >> 2;
-+	if (lngth > (cntbytes >> 2)) {
-+		lngth = cntbytes >> 2;
-+	}
-+	for (i = 0; (i < lngth); ++i) {
-+		TokenType itoken;
-+		u32 j;
-+		tptr = tkns;
-+		for (j = 0; j < NUMBER_OF_TOKENS_PER_INSTRUCTION; ++j) {
-+			ipack_probability_type prob;
-+			u32 range = coder_high - coder_low + 1;
-+
-+#ifdef IPACK_TREE_TO_CODE
-+			if (treefunc != NULL)
-+				itoken = (*treefunc) (treeroot, coder_value - coder_low + 1, range, &prob);
-+			else
-+#endif
-+				itoken = ipack_model_get_token_for_range(treeroot, coder_value - coder_low + 1, range, &prob);
-+
-+
-+			if (prob.high == prob.low) {
-+				return EC_CODER_WRONG_PROBABILITY;
-+			}
-+			coder_high = coder_low + ((range * prob.high) >> PROBABILITY_SHIFT) - 1;
-+			coder_low += ((range * prob.low) >> PROBABILITY_SHIFT);
-+			for (;;) {
-+				if (coder_high < CODER_VALUEHLF) {
-+				}
-+				else if (CODER_VALUEHLF <= coder_low) {
-+					coder_value -= CODER_VALUEHLF;
-+					coder_high -= CODER_VALUEHLF;
-+					coder_low -= CODER_VALUEHLF;
-+				}
-+				else if ((CODER_VALUE1ST <= coder_low) && (coder_high < CODER_VALUE3RD)) {
-+					coder_value -= CODER_VALUE1ST;
-+					coder_high -= CODER_VALUE1ST;
-+					coder_low -= CODER_VALUE1ST;
-+				}
-+				else {
-+					break;
-+				}
-+				coder_low <<= 1;
-+				coder_high <<= 1;
-+				++(coder_high);
-+				coder_value <<= 1;
-+				if (bitvector.ptr == bitvector.end) {
-+					bitvector.freebits = 0;
-+				}
-+				coder_value += ((*(bitvector.ptr) >> bitvector.freebits) & 0x01);
-+				if (bitvector.freebits) {
-+					--bitvector.freebits;
-+				}
-+				else {
-+					bitvector.freebits = 7;
-+					++bitvector.ptr;
-+				}
-+				if (coder_high < coder_low) {
-+					return EC_CODER_WRONG_RANGE;
-+				}
-+				if ((bitvector.ptr == bitvector.end) && !(bitvector.freebits)) {
-+					if ((coder_overread++) > CODER_VALUEBITS) {
-+						return EC_BUFFER_UNDERFLOW;
-+					}
-+				}
-+			}
-+			{
-+#ifdef TXT_TOKENS
-+//                                register u32 ndx;
-+				predctrs[0] = itoken;
-+				if ((('a' <= itoken) && (itoken <= 'z')) || (('A' <= itoken) && (itoken <= 'Z'))) {
-+					++(predctrs[1]);
-+				}
-+				else {
-+					predctrs[1] = 0;
-+				}
-+
-+#else
-+				register u32 ndx = predctrs[0] + 1;
-+				predctrs[ndx + 8] = predctrs[ndx];
-+				predctrs[ndx] = itoken;
-+				if (ndx == 8) {
-+					predctrs[0] = 0;
-+				}
-+				else {
-+					++predctrs[0];
-+				}
-+#endif
-+			}
-+
-+			(*(tptr++)) = itoken;
-+		}
-+		tptr = tkns;
-+#ifndef __KERNEL__
-+		if (ipack_glb_endian_X) {
-+#ifdef TXT_TOKENS
-+			(*data) = ((*tptr) << 24);
-+			++tptr;
-+			(*data) |= ((*tptr) << 16);
-+			++tptr;
-+			(*data) |= ((*tptr) << 8);
-+			++tptr;
-+			(*data) |= (*tptr);
-+			++data;
-+#else
-+			(*data) = (((*tptr) & 0xf) << 12);
-+			++tptr;
-+			(*data) |= ((*tptr) & 0xf);
-+			++tptr;
-+			(*data) |= (((*tptr) & 0xf) << 28);
-+			++tptr;
-+			(*data) |= (((*tptr) & 0xf) << 16);
-+			++tptr;
-+			(*data) |= (((*tptr) & 0xf) << 8);
-+			++tptr;
-+			(*data) |= (((*tptr) & 0xf) << 20);
-+			++tptr;
-+			(*data) |= (((*tptr) & 0xf) << 24);
-+			++tptr;
-+			(*data) |= (((*tptr) & 0xf) << 4);
-+			++data;
-+#endif
-+		}
-+		else {
-+#endif
-+#ifdef TXT_TOKENS
-+			(*data) = (*tptr);
-+			++tptr;
-+			(*data) |= ((*tptr) << 8);
-+			++tptr;
-+			(*data) |= ((*tptr) << 16);
-+			++tptr;
-+			(*data) |= ((*tptr) << 24);
-+			++data;
-+#else
-+			(*data) = (((*tptr) & 0xf) << 20);
-+			++tptr;
-+			(*data) |= (((*tptr) & 0xf) << 24);
-+			++tptr;
-+			(*data) |= (((*tptr) & 0xf) << 4);
-+			++tptr;
-+			(*data) |= (((*tptr) & 0xf) << 8);
-+			++tptr;
-+			(*data) |= (((*tptr) & 0xf) << 16);
-+			++tptr;
-+			(*data) |= (((*tptr) & 0xf) << 12);
-+			++tptr;
-+			(*data) |= ((*tptr) & 0xf);
-+			++tptr;
-+			(*data) |= (((*tptr) & 0xf) << 28);
-+			++data;
-+#endif
-+#ifndef __KERNEL__
-+		}
-+#endif
-+	}
-+	return EC_NO_ERROR;
-+}
-+
-+static int ipack_armlib_estimate(void *model, unsigned char *input, unsigned long sourcelen, unsigned long *dstlen, unsigned long *readtime, unsigned long *writetime)
-+{
-+	int i, tmp, tmp2, max, maxi;
-+	int cnt_cond[] = { 0, 0, 0, 0 };
-+	int cnt_inst[] = { 0, 0, 0, 0 };
-+
-+	// TODO: make a more precise estimation!!!
-+	*readtime  = JFFS2_BBC_ZLIB_READ_TIME  * 6;
-+	*writetime = JFFS2_BBC_ZLIB_WRITE_TIME * 2;
-+
-+	if (sourcelen % 4 != 0) {
-+		*dstlen = sourcelen;
-+		return 0;
-+	}
-+	for (i = 0; i < sourcelen; i++, input++) {
-+		tmp2 = tmp = *input;
-+		tmp = ((tmp) & 0xf0) >> 4;
-+		tmp2 = tmp2 & 0xf;
-+		if (tmp == 14)
-+			cnt_cond[i % 4]++;
-+		if ((tmp2 == 2) || (tmp2 == 3))
-+			cnt_inst[i % 4]++;
-+	}
-+	maxi = -1;
-+	max = -1;
-+	for (i = 0; i < 4; i++)
-+		if (max < cnt_cond[i]) {
-+			max = cnt_cond[i];
-+			maxi = i;
-+		}
-+	/*jffs2_bbc_print("armlib_EST: %d/%d : %d/%d %d/%d %d/%d %d/%d",
-+	   cnt_cond[maxi],cnt_inst[maxi],
-+	   cnt_cond[0],cnt_inst[0],
-+	   cnt_cond[1],cnt_inst[1],
-+	   cnt_cond[2],cnt_inst[2],
-+	   cnt_cond[3],cnt_inst[3]); */
-+
-+	if (cnt_cond[maxi] < (sourcelen >> 4)) {
-+		*dstlen = sourcelen;
-+	}
-+	else {
-+		*dstlen = sourcelen / 3;
-+	}	
-+	
-+	return 0;
-+}
-+
-+static char *ipack_armlib_proc_info(void);
-+static int ipack_armlib_proc_command(char *command);
-+static void ipack_armlib_destroy_model(void **model);
-+
-+struct jffs2_bbc_compressor_type jffs2_bbc_armlib = {
-+	"armlib",
-+	0x464d5069,
-+	{0, 0, 0, 0},
-+	NULL,			// init
-+	ipack_armlib_compressor_init,	// init_model
-+	ipack_armlib_destroy_model,	// destroy_model
-+	ipack_armlib_compressor_deinit,	// deinit
-+	ipack_armlib_compress,
-+	ipack_armlib_estimate,
-+	ipack_armlib_decompress,
-+	ipack_armlib_proc_info,
-+	ipack_armlib_proc_command
-+};
-+
-+
-+static char *ipack_armlib_proc_info()
-+{
-+#ifdef IPACK_TREE_TO_CODE
-+#ifdef IPACK_AUTO_TREE_TO_CODE
-+	return "automatic tree to code conversion";
-+#else
-+	return "manual tree to code conversion possibility";
-+#endif
-+#else
-+	return "tree in memory version";
-+#endif
-+}
-+
-+static int ipack_armlib_proc_command(char *command)
-+{
-+	struct jffs2_bbc_model_list_node *model;
-+	ipack_model_type *armlib_model;
-+
-+	if ((*command == 'g') || (*command == 'G')) {
-+		jffs2_bbc_print1("Converting tree(s) to ARM code... (keeping original)\n");
-+		model = jffs2_bbc_armlib.models;
-+		if (model == NULL)
-+			jffs2_bbc_print1("no model found!\n");
-+		while (model != NULL) {
-+			armlib_model = model->model;
-+			if (armlib_model == NULL) {
-+				jffs2_bbc_print1("Error: NULL model!\n");
-+			}
-+			else {
-+				ipack_armlib_convert_tree_to_code(armlib_model, IPACK_TREE_CONVERT_KEEP);
-+			}
-+			model = model->next_compr_model;
-+		}
-+	}
-+	else if ((*command == 'r') || (*command == 'R')) {
-+		jffs2_bbc_print1("Converting tree(s) to ARM code... (deleting original)\n");
-+		model = jffs2_bbc_armlib.models;
-+		if (model == NULL)
-+			jffs2_bbc_print1("no model found!\n");
-+		while (model != NULL) {
-+			armlib_model = model->model;
-+			if (armlib_model == NULL) {
-+				jffs2_bbc_print1("Error: NULL model!\n");
-+			}
-+			else {
-+				//armlib_model->tree_code = ipack_tree_to_code(armlib_model, &tree_size);
-+				//jffs2_bbc_print("Convertation done. Code size=%d\n",tree_size);
-+				ipack_armlib_convert_tree_to_code(armlib_model, IPACK_TREE_CONVERT_REPLACE);
-+			}
-+			model = model->next_compr_model;
-+		}
-+	}
-+	else if ((*command == 'c') || (*command == 'C')) {
-+		jffs2_bbc_print1("Deleting ARM representation of the tree(s)...\n");
-+		model = jffs2_bbc_armlib.models;
-+		if (model == NULL)
-+			jffs2_bbc_print1("no model found!\n");
-+		while (model != NULL) {
-+			armlib_model = model->model;
-+			if (armlib_model == NULL) {
-+				jffs2_bbc_print1("Error: NULL model!\n");
-+			}
-+			else {
-+				if (armlib_model->tree_code == NULL) {
-+					jffs2_bbc_print1("already deleted.\n");
-+				}
-+				else {
-+					if (armlib_model->tree_root_ptr == NULL) {
-+						jffs2_bbc_print1("cannot delete this ARM tree - original tree has deleted\n");
-+					}
-+					else {
-+						jffs2_bbc_print1("deleting...");
-+						jffs2_bbc_free(armlib_model->tree_code);
-+						armlib_model->tree_code = NULL;
-+						jffs2_bbc_print1("done.\n");
-+					}
-+				}
-+			}
-+			model = model->next_compr_model;
-+		}
-+	}
-+	else if (*command == '?') {
-+		jffs2_bbc_print1("ARMLIB commands:\n");
-+		jffs2_bbc_print1("  g: convert TREEs to ARM code and keep the original\n");
-+		jffs2_bbc_print1("  r: convert TREEs to ARM code and remove the original\n");
-+		jffs2_bbc_print1("  c: delete the original TREEs - if there is any\n");
-+	}
-+	else {
-+		jffs2_bbc_print1("Unknown command.\n");
-+	}
-+	return 0;
-+}
-+
-+static void ipack_armlib_destroy_model(void **model)
-+{
-+	ipack_model_type *model_img;
-+
-+	model_img = *model;
-+	if (model_img == NULL) {
-+		jffs2_bbc_print1("jffs2.bbc: armlib: NULL model at destoying model!\n");
-+		return;
-+	}
-+	if (model_img->tree_code != NULL) {
-+		//jffs2_bbc_print1("jffs2.bbc: armlib: debug: freeing code...\n");
-+		jffs2_bbc_free(model_img->tree_code);
-+		model_img->tree_code = NULL;
-+	}
-+	if (model_img->tree_root_ptr != NULL) {
-+		//jffs2_bbc_print1("jffs2.bbc: armlib: debug: freeing tree...\n");
-+		jffs2_bbc_free(model_img->tree_root_ptr);
-+		model_img->tree_root_ptr = NULL;
-+	}
-+
-+	jffs2_bbc_free(model_img);
-+	*model = NULL;
-+}
-+
-+struct jffs2_bbc_compressor_type *jffs2_bbc_armlib_init(int mode)
-+{
-+	if (jffs2_bbc_register_compressor(&jffs2_bbc_armlib) == 0)
-+		return &jffs2_bbc_armlib;
-+	else
-+		return NULL;
-+}
-+
-+void jffs2_bbc_armlib_deinit(void)
-+{
-+	jffs2_bbc_unregister_compressor(&jffs2_bbc_armlib);
-+}
-+
-+/*END OF ARMLIB*/
-diff -Nur linux-mips-cvs/fs/jffs2/jffs2_bbc_framework.c linux-mips/fs/jffs2/jffs2_bbc_framework.c
---- linux-mips-cvs/fs/jffs2/jffs2_bbc_framework.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/jffs2_bbc_framework.c	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,1324 @@
-+/* 
-+ * JFFS2-BBC: Compression Framework
-+ *
-+ * $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+ *
-+ * Copyright (C) 2004, Ferenc Havasi
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-+ *
-+ */
-+
-+/* USE JFFS2_BBC_STANDALONE define if you don't want to compile without JFFS2 */
-+
-+//#define DEBUG_COMPRESSORS
-+//#define DEBUG_SHOW_BLOCK_SIZES
-+
-+#define JFFS2_BBC_STAT_BUFF_SIZE   8000
-+
-+#ifndef __KERNEL__
-+
-+#include <stdio.h>
-+#include <malloc.h>
-+typedef unsigned long uint32_t;
-+
-+#else
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/vmalloc.h>
-+
-+#endif
-+
-+#define JFFS2_BBC_ZLIB_BLOCK_SIGN_0 (120)
-+#define JFFS2_BBC_ZLIB_BLOCK_SIGN_1 (94)
-+
-+#define JFFS2_BBC_DUMMY_BLOCKSIGN_0 (0x54)
-+#define JFFS2_BBC_DUMMY_BLOCKSIGN_1 (0x01)
-+
-+#ifndef NULL
-+#define NULL ((void*)(0))
-+#endif
-+
-+#include "jffs2_bbc_framework.h"
-+
-+/*********************************************************************
-+ *                      Global data                                  *
-+ *********************************************************************/
-+
-+static int jffs2_bbc_compression_mode = JFFS2_BBC_ZLIB_MODE;
-+static struct jffs2_bbc_compressor_type *jffs2_bbc_manual_compressor = NULL;
-+static struct jffs2_bbc_compressor_type *jffs2_bbc_compressors = NULL;
-+static struct jffs2_bbc_model_list_node *jffs2_bbc_model_list = NULL;
-+static void *last_sb = NULL;	/* previously activated sb */
-+
-+/*********************************************************************
-+ *               Compressor initialization                           *
-+ *********************************************************************/
-+
-+#ifndef JFFS2_BBC_STANDALONE
-+
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_ARMLIB)
-+struct jffs2_bbc_compressor_type *jffs2_bbc_armlib_init(void);
-+void jffs2_bbc_armlib_deinit(void);
-+#endif
-+
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_LZO)
-+struct jffs2_bbc_compressor_type *jffs2_bbc_lzo_init(void);
-+void jffs2_bbc_lzo_deinit(void);
-+#endif
-+
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_LZSS)
-+struct jffs2_bbc_compressor_type *jffs2_bbc_lzss_init(void);
-+void jffs2_bbc_lzss_deinit(void);
-+#endif
-+
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_LZARI)
-+struct jffs2_bbc_compressor_type *jffs2_bbc_lzari_init(void);
-+void jffs2_bbc_lzari_deinit(void);
-+#endif
-+
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_LZHD)
-+struct jffs2_bbc_compressor_type *jffs2_bbc_lzhd_init(void);
-+void jffs2_bbc_lzhd_deinit(void);
-+#endif
-+
-+void jffs2_bbc_compressor_init()
-+{
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_ARMLIB)
-+	jffs2_bbc_armlib_init();
-+#endif
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_LZO)
-+	jffs2_bbc_lzo_init();
-+#endif
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_LZSS)
-+	jffs2_bbc_lzss_init();
-+#endif
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_LZARI)
-+	jffs2_bbc_lzari_init();
-+#endif
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_LZHD)
-+	jffs2_bbc_lzhd_init();
-+#endif
-+}
-+
-+void jffs2_bbc_compressor_deinit()
-+{
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_LZHD)
-+	jffs2_bbc_lzhd_deinit();
-+#endif
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_LZARI)
-+	jffs2_bbc_lzari_deinit();
-+#endif
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_LZSS)
-+	jffs2_bbc_lzss_deinit();
-+#endif
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_LZO)
-+	jffs2_bbc_lzo_deinit();
-+#endif
-+#if !defined(__KERNEL__) || defined(CONFIG_JFFS2_BBC_ARMLIB)
-+	jffs2_bbc_armlib_deinit();
-+#endif
-+}
-+
-+#endif
-+
-+#ifndef JFFS2_BBC_STANDALONE
-+
-+/*********************************************************************
-+ *                          ZLIB COMPRESSOR                          *
-+ *********************************************************************/
-+
-+extern int jffs2_zlib_compress2(unsigned char *data_in, unsigned char *cpage_out, uint32_t * sourcelen, uint32_t * dstlen);
-+extern void jffs2_zlib_decompress2(unsigned char *data_in, unsigned char *cpage_out, uint32_t srclen, uint32_t destlen);
-+
-+static int jffs2_bbc_zlib_compress(void *model, unsigned char *input, unsigned char *output, unsigned long *sourcelen, unsigned long *dstlen) 
-+{
-+        return jffs2_zlib_compress2(input, output, sourcelen, dstlen);
-+}
-+
-+static int jffs2_bbc_zlib_decompress(void *model, unsigned char *input, unsigned char *output, unsigned long sourcelen, unsigned long dstlen) 
-+{
-+        jffs2_zlib_decompress2(input, output, sourcelen, dstlen);
-+        return 0;
-+}
-+
-+static int jffs2_bbc_zlib_estimate(void *model, unsigned char *input, unsigned long sourcelen, unsigned long *dstlen, unsigned long *readtime, unsigned long *writetime)
-+{
-+	*dstlen    = sourcelen * 65 / 100;
-+	*readtime  = JFFS2_BBC_ZLIB_READ_TIME;
-+	*writetime = JFFS2_BBC_ZLIB_WRITE_TIME;
-+	return 0;
-+}
-+
-+static struct jffs2_bbc_compressor_type jffs2_bbc_zlib = {
-+        "zlib",
-+        0,
-+        {JFFS2_BBC_ZLIB_BLOCK_SIGN_0, JFFS2_BBC_ZLIB_BLOCK_SIGN_1, 0, 0},
-+        NULL,
-+        NULL,
-+        NULL,
-+        NULL,
-+        jffs2_bbc_zlib_compress,
-+        jffs2_bbc_zlib_estimate,
-+        jffs2_bbc_zlib_decompress,
-+        NULL,
-+        NULL,
-+        1
-+};
-+
-+static struct jffs2_bbc_compressor_type *jffs2_bbc_original_compressor = &jffs2_bbc_zlib;
-+
-+#endif
-+
-+/*********************************************************************
-+ *               Compression mode handling                           *
-+ *********************************************************************/
-+
-+int jffs2_bbc_get_compression_mode(void)
-+{
-+	return jffs2_bbc_compression_mode;
-+}
-+
-+void jffs2_bbc_set_compression_mode(int mode)
-+{
-+	jffs2_bbc_compression_mode = mode;
-+}
-+
-+void jffs2_bbc_set_manual_compressor(struct jffs2_bbc_compressor_type *c)
-+{
-+	jffs2_bbc_manual_compressor = c;
-+	jffs2_bbc_set_compression_mode(JFFS2_BBC_MANUAL_MODE);
-+}
-+
-+int jffs2_bbc_set_manual_compressor_by_name(char *name)
-+{
-+	struct jffs2_bbc_compressor_type *l;
-+	int i;
-+
-+	l = jffs2_bbc_compressors;
-+	while (l != NULL) {
-+		for (i = 0; i < 1000; i++) {
-+			if (l->name[i] == 0) {
-+				jffs2_bbc_set_manual_compressor(l);
-+				return 0;
-+			}
-+			else if (name[i] == 0)
-+				i = 1000;
-+			else if (name[i] != l->name[i])
-+				i = 1000;
-+		}
-+		l = l->next;
-+	}
-+	jffs2_bbc_set_manual_compressor(NULL);
-+	return 1;
-+}
-+
-+static struct jffs2_bbc_compressor_type *jffs2_bbc_get_compressor_by_name(char *name)
-+{
-+	struct jffs2_bbc_compressor_type *l;
-+	int i;
-+
-+#ifndef JFFS2_BBC_STANDALONE
-+	l = jffs2_bbc_original_compressor;
-+	for (i = 0; i < 1000; i++) {
-+		if (l->name[i] == 0) {
-+			return l;
-+		}
-+		else if (name[i] == 0)
-+			i = 1000;
-+		else if (name[i] != l->name[i])
-+			i = 1000;
-+	}
-+#endif
-+
-+	l = jffs2_bbc_compressors;
-+	while (l != NULL) {
-+		for (i = 0; i < 1000; i++) {
-+			if (l->name[i] == 0) {
-+				return l;
-+			}
-+			else if (name[i] == 0)
-+				i = 1000;
-+			else if (name[i] != l->name[i])
-+				i = 1000;
-+		}
-+		l = l->next;
-+	}
-+
-+	return NULL;
-+}
-+
-+int jffs2_bbc_disable_compressor_by_name(char *name)
-+{
-+	struct jffs2_bbc_compressor_type *l;
-+
-+        l = jffs2_bbc_get_compressor_by_name(name);
-+        if (l == NULL) return 1;
-+        l->enabled = 0;
-+        return 0;
-+}
-+
-+int jffs2_bbc_enable_compressor_by_name(char *name)
-+{
-+	struct jffs2_bbc_compressor_type *l;
-+
-+        l = jffs2_bbc_get_compressor_by_name(name);
-+        if (l == NULL) return 1;
-+        l->enabled = 1;
-+        return 0;
-+}
-+
-+void jffs2_bbc_compressor_command_by_name(char *name_and_command)
-+{
-+	struct jffs2_bbc_compressor_type *l;
-+	int i;
-+
-+	l = jffs2_bbc_compressors;
-+	while (l != NULL) {
-+		for (i = 0; i < 1000; i++) {
-+			if (l->name[i] == 0) {
-+				if (name_and_command[i] != ':') {
-+					jffs2_bbc_print1("jffs2.bbc: ':' missing after compressor name\n");
-+				}
-+				else {
-+					if (l->proc_command != NULL)
-+						l->proc_command(name_and_command + i + 1);
-+				}
-+				i = 1000;
-+				return;
-+			}
-+			else if (name_and_command[i] == 0) {
-+				i = 1000;
-+			}
-+			else if (name_and_command[i] != l->name[i]) {
-+				i = 1000;
-+			}
-+		}
-+		l = l->next;
-+	}
-+}
-+
-+struct jffs2_bbc_compressor_type *jffs2_bbc_get_manual_compressor(void)
-+{
-+	if (jffs2_bbc_get_compression_mode() != JFFS2_BBC_MANUAL_MODE) {
-+		jffs2_bbc_manual_compressor = NULL;
-+	}
-+	return jffs2_bbc_manual_compressor;
-+}
-+
-+/*********************************************************************
-+ *                  Compressor handling                              *
-+ *********************************************************************/
-+
-+struct jffs2_bbc_compressor_type *jffs2_bbc_get_compressor_list(void)
-+{
-+	return jffs2_bbc_compressors;
-+}
-+
-+struct jffs2_bbc_model_list_node *jffs2_bbc_get_model_list(void)
-+{
-+	return jffs2_bbc_model_list;
-+}
-+
-+int jffs2_bbc_register_compressor(struct jffs2_bbc_compressor_type *c)
-+{
-+	struct jffs2_bbc_compressor_type *l;
-+	struct jffs2_bbc_model_list_node *l2;
-+	int model_found = 0;
-+
-+	l = jffs2_bbc_compressors;
-+	/* Check for confilcts */
-+	while (l != NULL) {
-+		c->name[15] = 0;
-+		/*if (strcmp(c->name,l->name)==0) {
-+		   jffs2_bbc_print1("jffs2.bbc: compressor is already loaded.");
-+		   return -1;
-+		   } */
-+		if ((l->model_file_sign == c->model_file_sign) && (c->model_file_sign != 0)) {
-+			jffs2_bbc_print1("jffs2.bbc: already used model file sign. fail.");
-+			return -1;
-+		}
-+		l = l->next;
-+	}
-+	/* Search and initialize model */
-+	c->models = NULL;
-+	c->mounted = 0;
-+	if (c->init != NULL) {
-+		if (c->init() != 0) {
-+			jffs2_bbc_print2("jffs2.bbc: cannot initialize compressor %s.\n", c->name);
-+			return -1;
-+		}
-+	}
-+	if (c->model_file_sign != 0) {
-+		l2 = jffs2_bbc_model_list;
-+		while (1) {
-+			if (l2 == NULL)
-+				break;
-+			if (c->model_file_sign == l2->sign) {
-+				if (l2->compressor != NULL) {
-+					jffs2_bbc_print2("jffs2.bbc: register for %s: BUG, model file already reserved!!!!\n", c->name);
-+				}
-+				else {
-+					if (c->init_model(&(l2->model)) != 0) {
-+						jffs2_bbc_print2("jffs2.bbc: cannot initialize compressor %s for a model", c->name);
-+					}
-+					else {
-+						l2->compressor = c;
-+						l2->next_compr_model = c->models;
-+						c->models = l2;
-+						c->mounted++;
-+						model_found++;
-+					}
-+				}
-+			}
-+			l2 = l2->next_model;
-+		}
-+		/*if (model_found==0) {
-+		   jffs2_bbc_print2("jffs2.bbc: no macthing model file found for %s at this time (maybe later)\n",c->name);
-+		   } */
-+	}
-+	/* Insert to the end of the compressor list */
-+	c->enabled = 1;
-+	c->buffer = NULL;
-+	c->buffer_size = 0;
-+	c->stat_compr_orig = c->stat_compr_new = c->stat_decompr = 0;
-+	c->next = NULL;
-+	if (jffs2_bbc_compressors == NULL) {
-+		jffs2_bbc_compressors = c;
-+	}
-+	else {
-+		l = jffs2_bbc_compressors;
-+		while (l->next != NULL)
-+			l = l->next;
-+		l->next = c;
-+	}
-+	return 0;
-+}
-+
-+int jffs2_bbc_unregister_compressor(struct jffs2_bbc_compressor_type *c)
-+{
-+	struct jffs2_bbc_compressor_type *l;
-+	struct jffs2_bbc_model_list_node *l2;
-+
-+	if (c->mounted != 0) {
-+		jffs2_bbc_print1("jffs2.bbc: Compressor is in use. Sorry.");
-+		return -1;
-+	}
-+	if (jffs2_bbc_compressors == NULL) {
-+		jffs2_bbc_print1("jffs2.bbc: unregister: empty list.");
-+		return -1;
-+	}
-+	else if (jffs2_bbc_compressors == c) {
-+		if (c->deinit != NULL)
-+			c->deinit();
-+		jffs2_bbc_compressors = c->next;
-+	}
-+	else {
-+		l = jffs2_bbc_compressors;
-+		while (l->next != c) {
-+			if (l->next == NULL) {
-+				jffs2_bbc_print2("jffs2.bbc: unregister: cannot find compressor %s in the list.", c->name);
-+				return -1;
-+			}
-+			l = l->next;
-+		}
-+		if (c->deinit != NULL)
-+			c->deinit();
-+		l->next = c->next;
-+	}
-+	if (c->buffer != NULL) {
-+		jffs2_bbc_free(c->buffer);
-+		c->buffer = NULL;
-+		c->buffer_size = 0;
-+	}
-+
-+	l2 = jffs2_bbc_model_list;
-+	while (l2 != NULL) {
-+		if (l2->compressor == c) {
-+			jffs2_bbc_print1("jffs2.bbc: unregister: BUG: model found!!!");
-+			l2->compressor = NULL;
-+			l2->next_compr_model = NULL;
-+		}
-+		l2 = l2->next_model;
-+	}
-+
-+	return 0;
-+}
-+
-+int jffs2_bbc_model_new(void *sb, int i_num, void *model)
-+{
-+	struct jffs2_bbc_model_list_node *node;
-+	struct jffs2_bbc_compressor_type *l;
-+	char block_sign[2];
-+
-+	int sign;
-+
-+	/* check for conflicts... */
-+	sign = *((int *) model);
-+	block_sign[0] = *(((char *) model) + 4);
-+	block_sign[1] = *(((char *) model) + 5);
-+	node = jffs2_bbc_model_list;
-+	while (node != NULL) {
-+		if ((node->block_sign[0] == block_sign[0]) && (node->block_sign[1] == block_sign[1]) && (node->sb == sb)) {
-+			//jffs2_bbc_print2("jffs2.bbc: model_new: model conflict (inode=%d)!\n",i_num);
-+			return -1;
-+		}
-+		node = node->next_model;
-+	}
-+
-+	/* insertion */
-+	node = jffs2_bbc_malloc_small((long)sizeof(struct jffs2_bbc_model_list_node));
-+	node->sb = sb;
-+	node->model = model;
-+	node->sign = *((int *) model);
-+	node->block_sign[0] = *(((char *) model) + 4);
-+	node->block_sign[1] = *(((char *) model) + 5);
-+	node->inode = i_num;
-+	node->next_model = jffs2_bbc_model_list;
-+	node->compressor = NULL;
-+	node->stat_decompr = 0;
-+	node->next_compr_model = NULL;
-+	jffs2_bbc_model_list = node;
-+
-+	/* search for matching compressor */
-+	l = jffs2_bbc_compressors;
-+	while (l != NULL) {
-+		if (l->model_file_sign == sign) {
-+			//jffs2_bbc_print2("jffs2.bbc: compressor for model found: %s ",l->name);
-+			if (l->init_model(&(node->model)) != 0) {
-+				jffs2_bbc_print1("jffs2.bbc: cannot initialize compressor for a model");
-+			}
-+			else {
-+				l->mounted++;
-+				node->compressor = l;
-+				node->next_compr_model = l->models;
-+				l->models = node;
-+			}
-+			break;
-+		}
-+		l = l->next;
-+	}
-+	return 0;
-+}
-+
-+static void jffs2_bbc_model_del_from_compressor(struct jffs2_bbc_model_list_node *node)
-+{
-+	struct jffs2_bbc_model_list_node *l;
-+
-+	if (node->model != NULL) {
-+		if (node->compressor != NULL) {
-+			if (node->compressor->destroy_model == NULL) {
-+				jffs2_bbc_free(node->model);
-+				node->model = NULL;
-+			}
-+			else {
-+				node->compressor->destroy_model(&(node->model));
-+				if (node->model != NULL)
-+					jffs2_bbc_print1("jffs2.bbc: warning: not NULL model after destroying!\n");
-+			}
-+		}
-+	}
-+
-+	if (node->compressor == NULL) {
-+		jffs2_bbc_print1("jffs2.bbc: jffs2_bbc_model_del_from_compressor: no compressor!\n");
-+		return;
-+	}
-+	l = node->compressor->models;
-+	if (l == NULL) {
-+		jffs2_bbc_print1("jffs2.bbc: jffs2_bbc_model_del_from_compressor error, models=NULL!\n");
-+		return;
-+	}
-+	if (l == node) {
-+		node->compressor->models = node->next_compr_model;
-+		node->compressor->mounted--;
-+		return;
-+	}
-+	while (1) {
-+		if (l->next_compr_model == node) {
-+			l->next_compr_model = node->next_compr_model;
-+			node->compressor->mounted--;
-+			return;
-+		}
-+		l = l->next_compr_model;
-+		if (l == NULL) {
-+			jffs2_bbc_print1("jffs2.bbc: jffs2_bbc_model_del_from_compressor: not found\n");
-+			return;
-+		}
-+	}
-+}
-+
-+void jffs2_bbc_model_del(void *sb)
-+{
-+	struct jffs2_bbc_model_list_node *l, *l2;
-+
-+	l = jffs2_bbc_model_list;
-+	if (l == NULL)
-+		return;
-+	if (l->sb == sb) {
-+		jffs2_bbc_model_list = l->next_model;
-+		jffs2_bbc_model_del_from_compressor(l);
-+		jffs2_bbc_free_small(l);
-+		jffs2_bbc_model_del(sb);
-+		return;
-+	}
-+	while (1) {
-+		if (l->next_model == NULL) {
-+			break;
-+		}
-+		if (l->next_model->sb == sb) {
-+			l2 = l->next_model;
-+			l->next_model = l->next_model->next_model;
-+			jffs2_bbc_model_del_from_compressor(l2);
-+			jffs2_bbc_free_small(l2);
-+			jffs2_bbc_model_del(sb);
-+			return;
-+		}
-+		l = l->next_model;
-+	}
-+	last_sb = NULL;
-+}
-+
-+void jffs2_bbc_model_set_act_sb(void *sb)
-+{
-+	last_sb = sb;
-+}
-+
-+void *jffs2_bbc_model_get_act_sb(void)
-+{
-+	return last_sb;
-+}
-+
-+void *jffs2_bbc_model_get_newest(struct jffs2_bbc_compressor_type *compressor)
-+{
-+	struct jffs2_bbc_model_list_node *m, *best_m;
-+	int max_sign, sign;
-+
-+	if (compressor == NULL) {
-+		jffs2_bbc_print1("jffs2.bbc: jffs2_bbc_model_get: NULL!!\n");
-+		return NULL;
-+	}
-+
-+	best_m = NULL;
-+	max_sign = -1;
-+	m = compressor->models;
-+	while (m != NULL) {
-+		if (m->sb == last_sb) {
-+			sign = (int) (m->block_sign[0]) * 256 + (int) (m->block_sign[1]);
-+			if (sign > max_sign) {
-+				max_sign = sign;
-+				best_m = m;
-+			}
-+		}
-+		m = m->next_compr_model;
-+	}
-+	if (best_m != NULL)
-+		return best_m->model;
-+	else
-+		return NULL;
-+}
-+
-+/*********************************************************************          
-+ *                        Statistics                                 *          
-+ *********************************************************************/
-+
-+static char *jffs2_bbc_stat_buff = NULL;
-+
-+char *jffs2_bbc_get_model_stats(void)
-+{
-+	char *b;
-+	struct jffs2_bbc_model_list_node *m;
-+	struct jffs2_bbc_compressor_type *c;
-+
-+	if (jffs2_bbc_stat_buff == NULL)
-+		jffs2_bbc_stat_buff = jffs2_bbc_malloc(8000);
-+
-+	b = jffs2_bbc_stat_buff;
-+
-+	b += sprintf(b, "Loaded compressors:");
-+	c = jffs2_bbc_compressors;
-+	while (c != NULL) {
-+		b += sprintf(b, "\n  %s (%d) ", c->name, c->enabled);
-+		if (c->model_file_sign != 0) {
-+			b += sprintf(b, "m_sign=%d ", c->model_file_sign);
-+			b += sprintf(b, "models=");
-+			m = c->models;
-+			while (m != NULL) {
-+				b += sprintf(b, "(inode=%d)", m->inode);
-+				m = m->next_compr_model;
-+			}
-+		}
-+		else {
-+			b += sprintf(b, "b_sign=(%d,%d) nomodel", (int) (c->block_sign[0]), (int) (c->block_sign[1]));
-+		}
-+		if (c->proc_info != NULL) {
-+			b += sprintf(b, "\n    %s", c->proc_info());
-+		}
-+		c = c->next;
-+	}
-+
-+	m = jffs2_bbc_model_list;
-+	
-+	if (m == NULL) {
-+		b += sprintf(b, "\nPresent models: NONE\n");
-+	}
-+	else {
-+		b += sprintf(b, "\nPresent models:\n");
-+		while (m != NULL) {
-+			b += sprintf(b, "  b_sign=(%d,%d),inode=%d,decompr=%d", (int) (m->block_sign[0]), (int) (m->block_sign[1]), m->inode, m->stat_decompr);
-+			if (m->compressor == NULL)
-+				b += sprintf(b, ",compressor=NULL\n");
-+			else
-+				b += sprintf(b, ",compressor=%s\n", m->compressor->name);
-+			m = m->next_model;
-+		}
-+	}
-+
-+	return jffs2_bbc_stat_buff;
-+}
-+
-+/*********************************************************************
-+ *                  Memory handling, debug                           *
-+ *********************************************************************/
-+
-+static int jffs2_bbc_mem_counter = 0;
-+
-+#ifdef __KERNEL__
-+
-+void *jffs2_bbc_malloc(long size)
-+{
-+	void *addr = vmalloc(size);
-+	if (addr != NULL)
-+		jffs2_bbc_mem_counter++;
-+	else {
-+		jffs2_bbc_print2("DEBUG: not enough memory (%ld)\n", size);
-+	}
-+	return addr;
-+}
-+
-+void jffs2_bbc_free(void *addr)
-+{
-+	jffs2_bbc_mem_counter--;
-+	vfree(addr);
-+}
-+
-+void *jffs2_bbc_malloc_small(long size)
-+{
-+	void *addr;
-+	addr = kmalloc(size, 0);
-+	if (addr != NULL)
-+		jffs2_bbc_mem_counter++;
-+	return addr;
-+}
-+
-+void jffs2_bbc_free_small(void *addr)
-+{
-+	jffs2_bbc_mem_counter--;
-+	kfree(addr);
-+}
-+
-+#else
-+
-+void *jffs2_bbc_malloc(long size)
-+{
-+	void *addr = malloc(size);
-+	if (addr != NULL)
-+		jffs2_bbc_mem_counter++;
-+	return addr;
-+}
-+
-+void jffs2_bbc_free(void *addr)
-+{
-+	jffs2_bbc_mem_counter--;
-+	free(addr);
-+}
-+
-+void *jffs2_bbc_malloc_small(long size)
-+{
-+	return jffs2_bbc_malloc(size);
-+}
-+
-+void jffs2_bbc_free_small(void *addr)
-+{
-+	jffs2_bbc_free(addr);
-+}
-+
-+#endif
-+
-+int jffs2_bbc_test_memory_counter(int verbose)
-+{
-+	if (verbose > 0) {
-+		jffs2_bbc_print2("jffs2.bbc: mem_counter=%d!\n", jffs2_bbc_mem_counter);
-+	}
-+	return jffs2_bbc_mem_counter;
-+}
-+
-+int jffs2_bbc_get_memory_counter(void)
-+{
-+	return jffs2_bbc_mem_counter;
-+}
-+
-+static char mem_stat[200];
-+
-+char *jffs2_bbc_get_mem_stats(void)
-+{
-+	sprintf(mem_stat, "Memcounter=%d\n", jffs2_bbc_mem_counter);
-+	return mem_stat;
-+}
-+
-+void jffs2_bbc_print_flush(void)
-+{
-+#ifdef __KERNEL__
-+	return;
-+#else
-+	fflush(stdout);
-+	fflush(stderr);
-+#endif
-+}
-+
-+/*********************************************************************
-+ *                FRAMEWORK - ZLIB REPLACEMENT                       *
-+ *********************************************************************/
-+
-+#ifndef JFFS2_BBC_STANDALONE
-+
-+/* Temorary buffers */
-+static char stat_str[JFFS2_BBC_STAT_BUFF_SIZE];
-+static int tmp_buffer_size = 0;
-+static char *tmp_buffer = NULL;
-+
-+/* Statistic - used by /proc/jffs2_bbc and mkfs.jffs2 */
-+char *jffs2_bbc_get_compr_stats(void)
-+{
-+	struct jffs2_bbc_compressor_type *l;
-+	char *s = stat_str;
-+
-+	s += sprintf(s, "Compression statistics:\n");
-+        l = jffs2_bbc_original_compressor;
-+	//s += sprintf(s, " zlib: compr=%d/%d decompr=%d\n", stat_zlib_compr_new, stat_zlib_compr_orig, stat_zlib_decompr);
-+	s += sprintf(s, " %s: compr=%d/%d decompr=%d\n", l->name, l->stat_compr_new, l->stat_compr_orig, l->stat_decompr);
-+	l = jffs2_bbc_get_compressor_list();
-+	while (l != NULL) {
-+		s += sprintf(s, " %s: compr=%d/%d decompr=%d\n", l->name, l->stat_compr_new, l->stat_compr_orig, l->stat_decompr);
-+		l = l->next;
-+	}
-+	return stat_str;
-+}
-+
-+static void jffs2_bbc_buffer_fill(unsigned char *buff, int size)
-+{
-+	for (; size > 0; size--, buff++)
-+		*buff = 255;
-+}
-+
-+
-+static int jffs2_bbc_update_compr_buf(unsigned long size)
-+{
-+	struct jffs2_bbc_compressor_type *l;
-+
-+	if (size < 5000)
-+		size = 5000;
-+	if (tmp_buffer == NULL) {
-+		tmp_buffer = jffs2_bbc_malloc(size);
-+		jffs2_bbc_buffer_fill(tmp_buffer, size);
-+		tmp_buffer_size = size;
-+	}
-+	else if (tmp_buffer_size < size) {
-+		jffs2_bbc_free(tmp_buffer);
-+		tmp_buffer = jffs2_bbc_malloc(size);
-+		jffs2_bbc_buffer_fill(tmp_buffer, size);
-+		tmp_buffer_size = size;
-+	}
-+	l = jffs2_bbc_get_compressor_list();
-+	while (l != NULL) {
-+		if (l->buffer == NULL) {
-+			l->buffer_size = size;
-+			l->buffer = jffs2_bbc_malloc(size);
-+			jffs2_bbc_buffer_fill(l->buffer, size);
-+		}
-+		else if (l->buffer_size < size) {
-+			jffs2_bbc_free(l->buffer);
-+			l->buffer_size = size;
-+			l->buffer = jffs2_bbc_malloc(size);
-+			jffs2_bbc_buffer_fill(l->buffer, size);
-+		}
-+		l = l->next;
-+	}
-+	return 0;
-+}
-+
-+#ifdef DEBUG_COMPRESSORS
-+
-+static unsigned char *debug_tmp_buff = NULL;
-+static long debug_orig_srclen = -1;
-+static long debug_orig_dstlen = -1;
-+static int debug_mem_counter = -1;
-+
-+
-+void debug_before_compress(struct jffs2_bbc_compressor_type *c, void *model, unsigned char *input, unsigned char *output, long *sourcelen, long *dstlen)
-+{
-+
-+	debug_orig_srclen = *sourcelen;	// for buffer overflow test
-+	debug_orig_dstlen = *dstlen;	// for buffer overflow test
-+	output[debug_orig_dstlen + 1] = 255;
-+
-+	debug_mem_counter = jffs2_bbc_get_memory_counter();	// for memory guard
-+}
-+
-+void debug_after_compress(struct jffs2_bbc_compressor_type *c, int back, void *model, unsigned char *input, unsigned char *output, long *sourcelen, long *dstlen)
-+{
-+	long dst_len = *dstlen;
-+	long src_len = *sourcelen;
-+	int i;
-+
-+	// Memory guard
-+	if (debug_mem_counter != jffs2_bbc_get_memory_counter()) {
-+		jffs2_bbc_print4("!!!!!!!! %s error: possible COMPRESSOR MEMORY LEAK: %d->%d\n", c->name, debug_mem_counter, jffs2_bbc_get_memory_counter());
-+		debug_mem_counter = jffs2_bbc_get_memory_counter();
-+	}
-+
-+	// Buffer overflow test  
-+	if (output[debug_orig_dstlen + 1] != 255) {
-+		jffs2_bbc_print7("!!!!!!!! %s error: BUFFER OVERFLOW !!!!!!!!!!!! b[%d]=%d (srclen=%d dstlen=%d, back=%d)\n", c->name, (int) (debug_orig_dstlen + 1), (int) (output[debug_orig_dstlen + 1]), (int) (debug_orig_srclen), (int) (*dstlen), back);
-+	}
-+
-+	// Decompression check
-+	if (back == 0) {
-+		if (debug_tmp_buff == NULL)
-+			debug_tmp_buff = jffs2_bbc_malloc(17000);
-+		for (i = 0; i < src_len; i++) debug_tmp_buff[i] = 0xf6;
-+		c->decompress(model, output, debug_tmp_buff, dst_len, src_len);
-+		// Memory guard for decompressor
-+		if (debug_mem_counter != jffs2_bbc_get_memory_counter()) {
-+			jffs2_bbc_print4("!!!!!!!! %s error: possible DECOMPRESSOR MEMORY LEAK: %d->%d\n", c->name, debug_mem_counter, jffs2_bbc_get_memory_counter());
-+			debug_mem_counter = jffs2_bbc_get_memory_counter();
-+		}
-+
-+		for (i = 0; i < src_len; i++)
-+			if (input[i] != debug_tmp_buff[i]) {
-+				jffs2_bbc_print7("!!!!!!!! %s error: BLOCK DECOMPRESSED BADLY (first bad: %d in %d: %d!=%d (compressed size=%d)) !!!!!!!!!!!!\n", c->name, i, src_len, (int)input[i], (int)debug_tmp_buff[i], dst_len);
-+				break;
-+			}
-+		return;
-+	}
-+
-+	// Return value test
-+	//jffs2_bbc_print3("!!!!!!!! %s error: %d !!!!!!!!!!!!\n", c->name, back);
-+}
-+
-+#endif
-+
-+int jffs2_zlib_compress(unsigned char *data_in, unsigned char *cpage_out, uint32_t * sourcelen, uint32_t * dstlen)
-+{
-+	struct jffs2_bbc_compressor_type *c;
-+	int back, back_zlib, mode, min, i, i2;
-+	long tmp = 0, tmp_read_time = 1000, tmp_write_time = 1000, orig_src, orig_dest, src, dest;
-+	struct jffs2_bbc_model_list_node *m;
-+	void *sb;
-+	unsigned char *tmp_p = NULL;
-+
-+	sb = jffs2_bbc_model_get_act_sb();
-+
-+	orig_src = *sourcelen;
-+	orig_dest = *dstlen;
-+
-+	mode = jffs2_bbc_get_compression_mode();
-+
-+	if (mode == JFFS2_BBC_DUMMY_MODE) {
-+		i=0; i2=0;
-+		if (*dstlen>2) {
-+			cpage_out[i++]=JFFS2_BBC_DUMMY_BLOCKSIGN_0;
-+			cpage_out[i++]=JFFS2_BBC_DUMMY_BLOCKSIGN_1;
-+			i2=i;
-+		}		
-+		for (;((i < *dstlen) && (i < (*sourcelen)+i2));i++) {
-+			cpage_out[i] = data_in[i-i2];
-+		}
-+		*sourcelen=i-i2;
-+		*dstlen=i;
-+		return 0;
-+	}
-+
-+	if (mode == JFFS2_BBC_ZLIB_MODE) {
-+                /*if (!jffs2_bbc_original_compressor->enabled) {
-+                        jffs2_bbc_print2("jffs2.bbc: WARNING: ZLIB mode but %s disabled! Enabling for this procedure...\n",jffs2_bbc_original_compressor->name);
-+                }*/
-+		back = jffs2_bbc_original_compressor->compress(NULL, data_in, cpage_out, sourcelen, dstlen);
-+		jffs2_bbc_original_compressor->stat_compr_orig += *sourcelen;
-+		jffs2_bbc_original_compressor->stat_compr_new += *dstlen;
-+		return back;
-+	}
-+
-+	jffs2_bbc_update_compr_buf(orig_dest);
-+
-+	if (mode == JFFS2_BBC_SIZE_MODE) {
-+		// Testing all compressors
-+                if (!jffs2_bbc_original_compressor->enabled) {
-+			min = -1;
-+                }
-+                else {
-+			back_zlib = jffs2_bbc_original_compressor->compress(NULL, data_in, cpage_out, sourcelen, dstlen);
-+			min = *dstlen;
-+                }
-+		c = jffs2_bbc_get_compressor_list();
-+		while (c != NULL) {
-+			c->buffer_cnt = -1;
-+			if (c->enabled == 0) {
-+				c = c->next;
-+				continue;
-+			}
-+			if (c->model_file_sign == 0) {
-+				src = orig_src;
-+				dest = orig_dest;
-+#ifdef DEBUG_COMPRESSORS
-+				debug_before_compress(c, NULL, data_in, c->buffer, &src, &dest);
-+#endif
-+				back = c->compress(NULL, data_in, c->buffer, &src, &dest);
-+#ifdef DEBUG_COMPRESSORS
-+				debug_after_compress(c, back, NULL, data_in, c->buffer, &src, &dest);
-+#endif
-+				if (back == 0) {
-+					c->buffer_cnt = dest;
-+					if ((min < 0) || (min > dest))
-+						min = dest;
-+				}
-+			}
-+			else {
-+				m = c->models;
-+				while (m != NULL) {
-+					src = orig_src;
-+					dest = orig_dest;
-+					if (m->sb == sb) {
-+						if (c->buffer_cnt == -1) {
-+#ifdef DEBUG_COMPRESSORS
-+							debug_before_compress(c, m->model, data_in, c->buffer, (long *) (&src), (long *) (&dest));
-+#endif
-+							back = c->compress(m->model, data_in, c->buffer, (long *) (&src), (long *) (&dest));
-+#ifdef DEBUG_COMPRESSORS
-+							debug_after_compress(c, back, m->model, data_in, c->buffer, (long *) (&src), (long *) (&dest));
-+#endif
-+							if (back == 0) {
-+								c->buffer_cnt = dest;
-+								if ((min < 0) || (min > dest))
-+									min = dest;
-+							}
-+						}
-+						else {
-+#ifdef DEBUG_COMPRESSORS
-+							debug_before_compress(c, m->model, data_in, tmp_buffer, &src, &dest);
-+#endif
-+							back = c->compress(m->model, data_in, tmp_buffer, &src, &dest);
-+#ifdef DEBUG_COMPRESSORS
-+							debug_after_compress(c, back, m->model, data_in, tmp_buffer, &src, &dest);
-+#endif
-+							if (back == 0) {
-+								if (c->buffer_cnt > dest) {
-+									c->buffer_cnt = dest;
-+									tmp_p = c->buffer;
-+									c->buffer = tmp_buffer;
-+									tmp_buffer = tmp_p;
-+									if ((min < 0) || (min > dest))
-+										min = dest;
-+								}
-+							}
-+						}
-+					}
-+					m = m->next_compr_model;
-+				}
-+			}
-+			c = c->next;
-+		}
-+		//Finding the best and copy its result
-+
-+#ifdef DEBUG_SHOW_BLOCK_SIZES
-+		jffs2_bbc_print1("\n");
-+                if (jffs2_bbc_original_compressor->enabled) {
-+			if (min == *dstlen) {
-+				jffs2_bbc_print3("%s:%d* ", jffs2_bbc_original_compressor->name, (int) (*dstlen));
-+                        }
-+			else {
-+				jffs2_bbc_print3("%s:%d ", jffs2_bbc_original_compressor->name, (int) (*dstlen));
-+                        }
-+		} 
-+		c = jffs2_bbc_get_compressor_list();
-+		while (c != NULL) {
-+			if (c->enabled == 0) {
-+				c = c->next;
-+				continue;
-+			}
-+			if (c->buffer_cnt == min)
-+				jffs2_bbc_print3("%s:%d* ", c->name, c->buffer_cnt);
-+			else
-+				jffs2_bbc_print3("%s:%d ", c->name, c->buffer_cnt);
-+			c = c->next;
-+		}
-+#endif
-+
-+		if (min == -1) {
-+			return -1; // none of compressors work (maybe too short output buffer)
-+		}
-+
-+		if (jffs2_bbc_original_compressor->enabled) {
-+			if (min == *dstlen) {
-+		                jffs2_bbc_original_compressor->stat_compr_orig += *sourcelen;
-+		                jffs2_bbc_original_compressor->stat_compr_new += *dstlen;
-+				return back_zlib;
-+			}
-+		}
-+
-+		c = jffs2_bbc_get_compressor_list();
-+		while (c != NULL) {
-+			if (c->enabled == 0) {
-+				c = c->next;
-+				continue;
-+			}
-+			if (c->buffer_cnt == min) {
-+				*dstlen = c->buffer_cnt;
-+				*sourcelen = orig_src;
-+				for (i = 0; i < *dstlen; i++) {
-+					cpage_out[i] = c->buffer[i];
-+				}
-+				c->stat_compr_orig += *sourcelen;
-+				c->stat_compr_new += *dstlen;
-+				return 0;
-+			}
-+			c = c->next;
-+		}
-+		jffs2_bbc_print1("jffs2.bbc: compr (full): BUG!!!\n");
-+		return 0;
-+	}
-+
-+	if ((mode == JFFS2_BBC_FASTR_MODE)||(mode == JFFS2_BBC_FASTW_MODE)||(mode == JFFS2_BBC_FASTS_MODE)) {
-+		// Estimating all compressors
-+                if (jffs2_bbc_original_compressor->enabled) {
-+		        back = jffs2_bbc_original_compressor->estimate(NULL, data_in, *sourcelen, &tmp, &tmp_read_time, &tmp_write_time);
-+		} 
-+                else {
-+			tmp = -1;
-+			tmp_read_time = -1;
-+			tmp_write_time = -1;
-+		}
-+		if (mode == JFFS2_BBC_FASTR_MODE) tmp = tmp_read_time;
-+		if (mode == JFFS2_BBC_FASTW_MODE) tmp = tmp_write_time;
-+		min = tmp;
-+		c = jffs2_bbc_get_compressor_list();
-+		while (c != NULL) {
-+			src = orig_src;
-+			dest = orig_dest;
-+			c->buffer_cnt = -1;
-+			if (c->enabled == 0) {
-+				c = c->next;
-+				continue;
-+			}
-+			if ((c->model_file_sign == 0) || (jffs2_bbc_model_get_newest(c) != NULL)) {
-+				back = c->estimate(jffs2_bbc_model_get_newest(c), data_in, src, &dest, &tmp_read_time, &tmp_write_time);
-+				if (mode == JFFS2_BBC_FASTR_MODE) dest = tmp_read_time;
-+				if (mode == JFFS2_BBC_FASTW_MODE) dest = tmp_write_time;
-+				if (back == 0) {
-+					c->buffer_cnt = dest;
-+					if ((min < 0) || (min > dest))
-+						min = dest;
-+				}
-+				else {
-+					c->buffer_cnt = -1;
-+				}
-+			}
-+			c = c->next;
-+		}
-+		// Finding the best and compress with it
-+		if (min == -1) {
-+			return -1;
-+		}
-+                if (jffs2_bbc_original_compressor->enabled) {
-+    		        if (min == tmp) {
-+				back = jffs2_bbc_original_compressor->compress(NULL, data_in, cpage_out, sourcelen, dstlen);
-+				jffs2_bbc_original_compressor->stat_compr_orig += *sourcelen;
-+				jffs2_bbc_original_compressor->stat_compr_new += *dstlen;
-+				return back;
-+			}
-+	        }
-+		c = jffs2_bbc_get_compressor_list();
-+		while (c != NULL) {
-+			if (c->enabled == 0) {
-+				c = c->next;
-+				continue;
-+			}
-+			if (c->buffer_cnt == min) {
-+				back = c->compress(jffs2_bbc_model_get_newest(c), data_in, cpage_out, (unsigned long*)sourcelen, (unsigned long*)dstlen);
-+				if ((back == 0) && (*dstlen < orig_dest) && (*dstlen > 4)) {
-+					c->stat_compr_orig += *sourcelen;
-+					c->stat_compr_new += *dstlen;
-+				}
-+				else { // fallback will always be available
-+					*sourcelen = orig_src;
-+					*dstlen = orig_dest;
-+					back = jffs2_bbc_original_compressor->compress(NULL, data_in, cpage_out, sourcelen, dstlen);
-+					jffs2_bbc_original_compressor->stat_compr_orig += *sourcelen;
-+					jffs2_bbc_original_compressor->stat_compr_new += *dstlen;
-+					return back;
-+				}
-+				return 0;
-+			}
-+			c = c->next;
-+		}
-+		jffs2_bbc_print1("jffs2.bbc: compress (fastX mode): BUG!!!\n");
-+		return 0;
-+	}
-+
-+	if (mode == JFFS2_BBC_MANUAL_MODE) {
-+		c = jffs2_bbc_get_manual_compressor();
-+		if (c != NULL) {
-+			if (c->model_file_sign == 0) {
-+				src = orig_src;
-+				dest = orig_dest;
-+				back = c->compress(NULL, data_in, cpage_out, &src, &dest);
-+				if (back == 0) {
-+					*dstlen = dest;
-+					*sourcelen = src;
-+					c->stat_compr_orig += *sourcelen;
-+					c->stat_compr_new += *dstlen;
-+					return 0;
-+				}
-+			}
-+			else {
-+				c->buffer_cnt = -1;
-+				m = c->models;
-+				min = -1;
-+				while (m != NULL) {
-+					src = orig_src;
-+					dest = orig_dest;
-+					if (m->sb == sb) {
-+						if (min == -1) {
-+							back = c->compress(m->model, data_in, cpage_out, (unsigned long*)sourcelen, (unsigned long*)dstlen);
-+							if ((back == 0) && (*dstlen < orig_dest) && (*dstlen > 4)) {
-+								min = dest;
-+								tmp_p = cpage_out;
-+							}
-+						}
-+						else {
-+							back = c->compress(m->model, data_in, tmp_buffer, &src, &dest);
-+							if ((back == 0) && (dest < orig_dest) && (dest > 4)) {
-+								if (c->buffer_cnt > dest) {
-+									if (min > dest) {
-+										min = dest;
-+										tmp_p = tmp_buffer;
-+									}
-+								}
-+							}
-+						}
-+					}
-+					m = m->next_compr_model;
-+				}
-+				if (min != -1) {
-+					if (tmp_p != cpage_out) {
-+						for (i = 0; i < min; i++)
-+							cpage_out[i] = tmp_p[i];
-+						*sourcelen = orig_src;
-+						*dstlen = min;
-+					}
-+					c->stat_compr_orig += *sourcelen;
-+					c->stat_compr_new += *dstlen;
-+					return 0;
-+				}
-+			}
-+		}
-+		/*else {
-+		   jffs2_bbc_print1("iPack: manual mode without selected compressor!\n");
-+		   } */
-+                
-+                /*if (!jffs2_bbc_original_compressor->enabled) {
-+                        jffs2_bbc_print2("jffs2.bbc: WARNING: %s must be enabled! Enabling for this procedure...\n",jffs2_bbc_original_compressor->name);
-+                }*/
-+		back = jffs2_bbc_original_compressor->compress(NULL, data_in, cpage_out, sourcelen, dstlen);
-+		jffs2_bbc_original_compressor->stat_compr_orig += *sourcelen;
-+		jffs2_bbc_original_compressor->stat_compr_new += *dstlen;
-+		return back;
-+
-+
-+	}
-+
-+	jffs2_bbc_print1("jffs2.bbc: compress: unimlemented compress mode!!!\n");
-+	return 0;
-+}
-+
-+void jffs2_zlib_decompress(unsigned char *data_in, unsigned char *cpage_out, uint32_t srclen, uint32_t destlen)
-+{
-+	struct jffs2_bbc_model_list_node *m;
-+	struct jffs2_bbc_compressor_type *c;
-+	char d[2];
-+	void *sb;
-+	int i;
-+
-+	/* If the input too small... */
-+	if (destlen<=2) {
-+		cpage_out[0]=data_in[0];
-+		if (destlen==2) cpage_out[1]=data_in[1];
-+		return;
-+	}
-+	
-+	sb = jffs2_bbc_model_get_act_sb();
-+	d[0] = *(data_in);
-+	d[1] = *(data_in + 1);
-+
-+	d[0] &= 0x7f;		// Variants support...
-+
-+	/* Search for model based decompressors... */
-+	m = jffs2_bbc_get_model_list();
-+	while (m != NULL) {
-+		if ((d[0] == m->block_sign[0]) && (d[1] == m->block_sign[1]) && (sb == m->sb)) {
-+			if (m->compressor == NULL) {
-+				jffs2_bbc_print3("jffs2.bbc: decompressor for block_sign (%d,%d) not loaded!\n", (int) (d[0]), (int) (d[1]));
-+			}
-+			else {
-+				m->compressor->decompress(m->model, data_in, cpage_out, srclen, destlen);
-+				m->compressor->stat_decompr++;
-+				m->stat_decompr++;
-+			}
-+			return;
-+		}
-+		m = m->next_model;
-+	}
-+	/* Is it ZLIB? */
-+	if ((((int) d[0]) == (int)(jffs2_bbc_original_compressor->block_sign[0])) && (((int) d[1]) == (int)(jffs2_bbc_original_compressor->block_sign[1]))) {
-+		jffs2_bbc_original_compressor->decompress(NULL, data_in, cpage_out, srclen, destlen);
-+		jffs2_bbc_original_compressor->stat_decompr++;
-+		return;
-+	}
-+	/* Search for non model based decompressors... */
-+	c = jffs2_bbc_get_compressor_list();
-+	while (c != NULL) {
-+		if (c->model_file_sign == 0) {
-+			if (((int) (d[0]) == (int) (c->block_sign[0])) && ((int) (d[1]) == (int) (c->block_sign[1]))) {
-+				c->decompress(NULL, data_in, cpage_out, srclen, destlen);
-+				c->stat_decompr++;
-+				return;
-+			}
-+		}
-+		c = c->next;
-+	}
-+	/* Is it DUMMY? */
-+	if ((((int) d[0]) == JFFS2_BBC_DUMMY_BLOCKSIGN_0) && (((int) d[1]) == JFFS2_BBC_DUMMY_BLOCKSIGN_1)) {
-+		for (i=0;i<destlen;i++) {
-+			cpage_out[i]=data_in[i+2];
-+		}
-+		return;
-+	}
-+	/* No matching decompressor found... */
-+	jffs2_bbc_print4("jffs2.bbc: cannot find model for decompress: bsign=(%d,%d),sb=%d. Using zlib.\n", (int) d[0], (int) d[1], (int) sb);
-+	jffs2_bbc_original_compressor->decompress(NULL, data_in, cpage_out, srclen, destlen);
-+	jffs2_bbc_original_compressor->stat_decompr++;
-+}
-+
-+#endif
-diff -Nur linux-mips-cvs/fs/jffs2/jffs2_bbc_framework.h linux-mips/fs/jffs2/jffs2_bbc_framework.h
---- linux-mips-cvs/fs/jffs2/jffs2_bbc_framework.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/jffs2_bbc_framework.h	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,202 @@
-+/*
-+ * JFFS2-BBC: Compression Framework - headers
-+ *
-+ * $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+ *
-+ * Copyright (C) 2004, Ferenc Havasi
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-+ *
-+ */
-+
-+#ifndef __JFFS2_BBC_FRAMEWORK_H__
-+
-+#define __JFFS2_BBC_FRAMEWORK_H__
-+
-+#define JFFS2_BBC_VERSION "0.54.3"
-+
-+#define JFFS2_BBC_CONFIG_FILE "bbc.conf"
-+
-+/********************************************************************* 
-+ *               Compression mode handling                           *
-+ *********************************************************************/
-+
-+#define JFFS2_BBC_ZLIB_MODE            1
-+#define JFFS2_BBC_SIZE_MODE            2
-+#define JFFS2_BBC_FASTR_MODE           3
-+#define JFFS2_BBC_FASTW_MODE           4
-+#define JFFS2_BBC_FASTS_MODE           5
-+#define JFFS2_BBC_MANUAL_MODE          6
-+#define JFFS2_BBC_DUMMY_MODE           7
-+
-+int jffs2_bbc_get_compression_mode(void);
-+void jffs2_bbc_set_compression_mode(int mode);
-+
-+/********************************************************************* 
-+ *                  Read/write speed unit                            *
-+ *         everything is relative to the speed of zlib               * 
-+ *             bigger number means slower speed!                     *
-+ *********************************************************************/
-+ 
-+#define JFFS2_BBC_ZLIB_READ_TIME  	10000
-+#define JFFS2_BBC_ZLIB_WRITE_TIME 	10000
-+
-+/********************************************************************* 
-+ *                  Compressor handling                              *
-+ *********************************************************************/
-+
-+struct jffs2_bbc_compressor_type
-+{
-+	char name[16];
-+	int model_file_sign;	/* 0 for no model file needed */
-+	char block_sign[4];	/* only nomodel compressors, and only the first 2 _bytes are used! */
-+	int (*init)(void);
-+	int (*init_model)(void **model);
-+	void (*destroy_model)(void **model);
-+	void (*deinit)(void);
-+	/* Compress block
-+	 *   *dstlen bytes are allocated.
-+	 *   if it is not enough write *sourcelen over to the processed amount of data
-+	 *   returns non zero if fails
-+	 */
-+	int (*compress)(void *model, unsigned char *input, unsigned char *output, unsigned long *sourcelen, unsigned long *dstlen);
-+	int (*estimate)(void *model, unsigned char *input, unsigned long sourcelen, 
-+	                unsigned long *dstlen, unsigned long *readtime, unsigned long *writetime);
-+	/* Decompress block 
-+	 *   returns non zero if fails
-+	 */
-+	int (*decompress)(void *model, unsigned char *input, unsigned char *output, unsigned long sourcelen, unsigned long dstlen);
-+	char *(*proc_info)(void);
-+	int (*proc_command)(char *command);
-+	int enabled;		/* filled by BBC */
-+	int mounted;		/* filled by BBC */
-+	void *models;		/* filled by BBC */
-+	char *buffer;		/* filled by BBC */
-+	int buffer_size;	/* filled by BBC */
-+	int buffer_cnt;		/* filled by BBC */
-+	int buffer_tmp;		/* filled by BBC */
-+	int stat_compr_orig;	/* filled by BBC */
-+	int stat_compr_new;	/* filled by BBC */
-+	int stat_decompr;	/* filled by BBC */
-+	struct jffs2_bbc_compressor_type *next;	/* filled by BBC */
-+};
-+
-+/* It sets the compression mode to JFFS2_BBC_MANUAL_MODE */
-+
-+void jffs2_bbc_set_manual_compressor(struct jffs2_bbc_compressor_type *c);	/* NULL = ZLIB */
-+int jffs2_bbc_set_manual_compressor_by_name(char *name);
-+int jffs2_bbc_disable_compressor_by_name(char *name);
-+int jffs2_bbc_enable_compressor_by_name(char *name);
-+void jffs2_bbc_compressor_command_by_name(char *name_and_command);
-+
-+/* If the compression mode is JFFS2_BCC_MANUAL_MODE the manually setted
-+   compressor can be get using it. Otherwise it returns with NULL. */
-+
-+struct jffs2_bbc_compressor_type *jffs2_bbc_get_manual_compressor(void);
-+
-+struct jffs2_bbc_model_list_node
-+{
-+	void *sb;		/* FS idendifier (JFFS2_SB_INFO(sb) at this moment) */
-+	void *model;		/* model data */
-+	int sign;		/* sign of the model (first 4 bytes) */
-+	char block_sign[4];	/* block sign - only the first 2 bytes are used! */
-+	int inode;		/* inode number of the model file */
-+	int stat_decompr;
-+	struct jffs2_bbc_compressor_type *compressor;
-+	struct jffs2_bbc_model_list_node *next_model;
-+	struct jffs2_bbc_model_list_node *next_compr_model;
-+};
-+
-+struct jffs2_bbc_compressor_type *jffs2_bbc_get_compressor_list(void);
-+struct jffs2_bbc_model_list_node *jffs2_bbc_get_model_list(void);
-+
-+int jffs2_bbc_register_compressor(struct jffs2_bbc_compressor_type *c);
-+int jffs2_bbc_unregister_compressor(struct jffs2_bbc_compressor_type *c);
-+
-+int jffs2_bbc_model_new(void *sb, int i_num, void *model);
-+void jffs2_bbc_model_del(void *sb);
-+void jffs2_bbc_model_set_act_sb(void *sb);
-+void *jffs2_bbc_model_get_act_sb(void);
-+void *jffs2_bbc_model_get_newest(struct jffs2_bbc_compressor_type *compressor);
-+ 
-+/********************************************************************* 
-+ *                 Compressor init function                          *
-+ *********************************************************************/
-+
-+void jffs2_bbc_compressor_init(void);
-+void jffs2_bbc_compressor_deinit(void);
-+
-+/********************************************************************* 
-+ *                        Statistics                                 *
-+ *********************************************************************/
-+
-+char *jffs2_bbc_get_compr_stats(void);
-+char *jffs2_bbc_get_model_stats(void);
-+
-+/********************************************************************* 
-+ *                          Other                                    *
-+ *********************************************************************/
-+
-+
-+void jffs2_bbc_print_flush(void);
-+
-+#ifdef __KERNEL__
-+#include <linux/kernel.h>
-+#define jffs2_bbc_print1(a) printk(a)
-+#define jffs2_bbc_print2(a,b) printk(a,b)
-+#define jffs2_bbc_print3(a,b,c) printk(a,b,c)
-+#define jffs2_bbc_print4(a,b,c,d) printk(a,b,c,d)
-+#define jffs2_bbc_print5(a,b,c,d,e) printk(a,b,c,d,e)
-+#define jffs2_bbc_print6(a,b,c,d,e,f) printk(a,b,c,d,e,f)
-+#define jffs2_bbc_print7(a,b,c,d,e,f,g) printk(a,b,c,d,e,f,g)
-+#define jffs2_bbc_print8(a,b,c,d,e,f,g,h) printk(a,b,c,d,e,f,g,h)
-+#define jffs2_bbc_print9(a,b,c,d,e,f,g,h,i) printk(a,b,c,d,e,f,g,h,i)
-+#else
-+#include <stdio.h>
-+#define jffs2_bbc_print1(a) fprintf(stderr,a)
-+#define jffs2_bbc_print2(a,b) fprintf(stderr,a,b)
-+#define jffs2_bbc_print3(a,b,c) fprintf(stderr,a,b,c)
-+#define jffs2_bbc_print4(a,b,c,d) fprintf(stderr,a,b,c,d)
-+#define jffs2_bbc_print5(a,b,c,d,e) fprintf(stderr,a,b,c,d,e)
-+#define jffs2_bbc_print6(a,b,c,d,e,f) fprintf(stderr,a,b,c,d,e,f)
-+#define jffs2_bbc_print7(a,b,c,d,e,f,g) fprintf(stderr,a,b,c,d,e,f,g)
-+#define jffs2_bbc_print8(a,b,c,d,e,f,g,h) fprintf(stderr,a,b,c,d,e,f,g,h)
-+#define jffs2_bbc_print9(a,b,c,d,e,f,g,h,i) fprintf(stderr,a,b,c,d,e,f,g,h,i)
-+#endif
-+
-+/* Handle endianness */
-+#ifndef __KERNEL__
-+
-+#define ENDIAN_HOST_AND_TARGET_SAME      0
-+#define ENDIAN_HOST_AND_TARGET_DIFFERENT 1
-+
-+extern int jffs2_bbc_glb_endian_X;
-+
-+#endif
-+
-+/* Allocating more than one page (tip. 4096 byte) */
-+void *jffs2_bbc_malloc(long size);
-+void jffs2_bbc_free(void *addr);
-+
-+/* Allocating less than one page (tip. 4096 byte) */
-+void *jffs2_bbc_malloc_small(long size);
-+void jffs2_bbc_free_small(void *addr);
-+
-+/* Memory guarding */
-+int jffs2_bbc_test_memory_counter(int verbose);
-+char *jffs2_bbc_get_mem_stats(void);
-+int jffs2_bbc_get_memory_counter(void);
-+
-+#endif
-diff -Nur linux-mips-cvs/fs/jffs2/jffs2_bbc_fs.c linux-mips/fs/jffs2/jffs2_bbc_fs.c
---- linux-mips-cvs/fs/jffs2/jffs2_bbc_fs.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/jffs2_bbc_fs.c	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,331 @@
-+/*
-+ * JFFS2-BBC: File System Extension for Linux Kernel
-+ *
-+ * $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+ *
-+ * Copyright (C) 2004, Ferenc Havasi
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/fs.h>
-+#include <linux/jffs2.h>
-+#include <linux/proc_fs.h>
-+#include <linux/version.h>
-+
-+#include "nodelist.h"
-+
-+#include "jffs2_bbc_framework.h"
-+
-+struct jffs2_bbc_fs_sb_list {
-+	struct super_block *sb;
-+	struct jffs2_bbc_fs_sb_list *next;
-+};
-+
-+static struct jffs2_bbc_fs_sb_list *sb_list = NULL;
-+
-+void jffs2_bbc_proc_init(void);
-+void jffs2_bbc_proc_deinit(void);
-+
-+void jffs2_bbc_load_model(void *sb_par) {
-+	struct jffs2_sb_info *c;
-+	//struct jffs2_inode_info *f;
-+	struct dentry *config_dentry,*model_dentry;
-+	struct qstr config_name,model_name;
-+	struct file *config_file,*model_file;
-+	char *buff=NULL,*model_buff;
-+	int config_size,model_size;
-+	int i,prev_i;
-+	struct super_block *sb;
-+	struct jffs2_bbc_fs_sb_list *sb_l;
-+	
-+	sb = sb_par;
-+	sb_l = jffs2_bbc_malloc_small(sizeof(struct jffs2_bbc_fs_sb_list));
-+	sb_l->sb = sb;
-+	sb_l->next = sb_list;
-+	sb_list = sb_l;	
-+	config_name.name = JFFS2_BBC_CONFIG_FILE;
-+        config_name.len = strlen(config_name.name);
-+	config_name.hash = full_name_hash(config_name.name,config_name.len);
-+        config_dentry = d_alloc(sb->s_root,&config_name);
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	
-+        sb->s_root->d_inode->i_op->lookup(sb->s_root->d_inode,config_dentry);
-+#else	
-+        sb->s_root->d_inode->i_op->lookup(sb->s_root->d_inode,config_dentry,NULL);
-+#endif
-+	
-+	if (config_dentry->d_inode != NULL) {
-+	        config_size = config_dentry->d_inode->i_size;
-+		//printk("config_file_size=%d\n",config_size);
-+		if (config_size > 0) {
-+		        buff = jffs2_bbc_malloc(config_size+1);
-+			config_file = dentry_open(config_dentry,NULL,O_RDONLY);
-+    			kernel_read(config_file,0,buff,config_size);
-+			buff[config_size] = 0;
-+			for (prev_i = i = 0 ; i < config_size+1 ; i++) {
-+				if (buff[i] == '\n') buff[i]=0;
-+				if (buff[i] == 0) {
-+					if (prev_i != i) {
-+						if ((buff[prev_i] == '-') && (buff[prev_i+1] == 0)) break;
-+						printk("reading model file %s... ",buff+prev_i);
-+						model_name.name = buff+prev_i;
-+						model_name.len = strlen(buff+prev_i);
-+			    			model_name.hash = full_name_hash(model_name.name,model_name.len);
-+						model_dentry = d_alloc(sb->s_root,&model_name);
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-+						sb->s_root->d_inode->i_op->lookup(sb->s_root->d_inode,model_dentry);
-+#else						
-+						sb->s_root->d_inode->i_op->lookup(sb->s_root->d_inode,model_dentry,NULL);
-+#endif
-+						if (model_dentry->d_inode != NULL) {
-+							c = JFFS2_SB_INFO(model_dentry->d_inode->i_sb);
-+							//f = JFFS2_INODE_INFO(model_dentry->d_inode);
-+							model_size = model_dentry->d_inode->i_size;
-+							model_buff = jffs2_bbc_malloc(model_size);
-+							model_file = dentry_open(model_dentry,NULL,O_RDONLY);
-+    							kernel_read(model_file,0,model_buff,model_size);
-+    							if (jffs2_bbc_model_new(c,model_dentry->d_inode->i_ino,model_buff) != 0) {
-+        							printk("already loaded.\n");
-+								jffs2_bbc_free(model_buff);
-+    							}
-+							else {
-+								printk("done (%d bytes readed from inode %d).\n",model_size,(int)(model_dentry->d_inode->i_ino));
-+							}
-+						}
-+						else {
-+							printk("not found.\n");
-+						}
-+						dput(model_dentry);
-+					}
-+    					prev_i = i+1;
-+				}
-+			}
-+		}
-+	}
-+	dput(config_dentry);
-+	if (buff != NULL) jffs2_bbc_free(buff);
-+}
-+
-+void jffs2_bbc_unload_model(void *sb_par)
-+{
-+	struct jffs2_sb_info *c;
-+	struct super_block *sb = sb_par;
-+	struct jffs2_bbc_fs_sb_list *sb_l,*sb_l2;
-+	int done = 0;
-+
-+	c = JFFS2_SB_INFO(sb);
-+	jffs2_bbc_model_del(c);
-+	if (sb_list == NULL) printk("jffs2.bbc: error! NULL sb list!\n");
-+	else {
-+		if (sb_list->sb == sb) {
-+			jffs2_bbc_free_small(sb_list);
-+			sb_list = NULL;
-+			done = 1;
-+		}
-+		else {
-+			sb_l = sb_list;
-+			while (sb_l->next != NULL) {
-+				if (sb_l->next->sb == sb) {
-+					sb_l2 = sb_l->next->next;
-+					jffs2_bbc_free_small(sb_l->next);
-+					sb_l->next = sb_l2;
-+					done = 1;
-+				}
-+				sb_l = sb_l->next;
-+			}
-+			
-+		}
-+		if (done == 0) {
-+			printk("jffs2.bbc: cannot delete sb from sblist!\n");
-+		}
-+	}
-+}
-+
-+static int jffs2_bbc_get_mounted(void) {
-+	struct jffs2_bbc_fs_sb_list *sb_l;
-+	int num = 0;
-+	
-+	sb_l = sb_list;
-+	while (sb_l != NULL) {
-+		num++;
-+		sb_l = sb_l->next;
-+	}
-+	return num;
-+	
-+}
-+
-+int jffs2_bbc_proc_read(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+{
-+	int len = 0, mode;
-+
-+	mode = jffs2_bbc_get_compression_mode();
-+	len += sprintf(buf + len, "BBC version: %s\n", JFFS2_BBC_VERSION);
-+	len += sprintf(buf+len,"Mounted jffs2 filesystems: %d\n",jffs2_bbc_get_mounted());
-+	//len += sprintf(buf+len,"actual model file inode: %d\n",jffs2_bbc_model_get_inum());
-+	len += sprintf(buf + len, "Compression mode: ");
-+	if (mode == JFFS2_BBC_ZLIB_MODE)
-+		len += sprintf(buf + len, "ZLIB mode");
-+	else if (mode == JFFS2_BBC_SIZE_MODE)
-+		len += sprintf(buf + len, "SIZE mode");
-+	else if (mode == JFFS2_BBC_FASTR_MODE)
-+		len += sprintf(buf + len, "FASTR mode");
-+	else if (mode == JFFS2_BBC_FASTW_MODE)
-+		len += sprintf(buf + len, "FASTW mode");
-+	else if (mode == JFFS2_BBC_FASTS_MODE)
-+		len += sprintf(buf + len, "FASTS mode");
-+	else if (mode == JFFS2_BBC_DUMMY_MODE)
-+		len += sprintf(buf + len, "DUMMY mode");
-+	else if (mode == JFFS2_BBC_MANUAL_MODE) {
-+		len += sprintf(buf + len, "MANUAL mode (");
-+		if (jffs2_bbc_get_manual_compressor() != NULL)
-+			len += sprintf(buf + len, "%s)", jffs2_bbc_get_manual_compressor()->name);
-+		else
-+			len += sprintf(buf + len, "ZLIB)");
-+	}
-+	else
-+		len += sprintf(buf + len, "unknown mode");
-+	len += sprintf(buf + len, "\n");
-+	len += sprintf(buf + len, "%s", jffs2_bbc_get_compr_stats());
-+	len += sprintf(buf + len, "%s", jffs2_bbc_get_model_stats());
-+	len += sprintf(buf + len, "%s", jffs2_bbc_get_mem_stats());
-+	*eof = 1;
-+	return len;
-+}
-+
-+int jffs2_bbc_proc_write(struct file *file, const char *buffer_orig, unsigned long count, void *data)
-+{
-+	char *buffer;
-+	int i;
-+	struct jffs2_bbc_fs_sb_list *sb_l;
-+	
-+	if (buffer_orig == NULL) return 0;
-+	
-+	buffer = jffs2_bbc_malloc(count+2);
-+	for (i=0;i<count;i++) buffer[i]=buffer_orig[i];
-+	buffer[count] = 0;
-+	if ((*buffer == 'z') || (*buffer == 'Z')) {
-+		jffs2_bbc_set_compression_mode(JFFS2_BBC_ZLIB_MODE);
-+		jffs2_bbc_print1("jffs2.bbc: ZLIB compression mode activated.\n");
-+		jffs2_bbc_free(buffer);
-+		return count;
-+	}
-+	else if ((*buffer == 's') || (*buffer == 'S')) {
-+		jffs2_bbc_set_compression_mode(JFFS2_BBC_SIZE_MODE);
-+		jffs2_bbc_print1("jffs2.bbc: SIZE compression mode activated.\n");
-+		jffs2_bbc_free(buffer);
-+		return count;
-+	}
-+	else if ((*buffer == 'd') || (*buffer == 'D')) {
-+		jffs2_bbc_set_compression_mode(JFFS2_BBC_DUMMY_MODE);
-+		jffs2_bbc_print1("jffs2.bbc: DUMMY compression mode activated.\n");
-+		jffs2_bbc_free(buffer);
-+		return count;
-+	}
-+	else if (((*buffer == 'm') || (*buffer == 'M')) && (count >= 3) && (buffer[1] == ':')) {
-+		jffs2_bbc_print1("jffs2.bbc: activating MANUAL mode.\n");
-+		jffs2_bbc_set_manual_compressor_by_name(buffer + 2);
-+		jffs2_bbc_free(buffer);
-+		return count;
-+	}
-+	else if (((*buffer == '0')) && (count >= 3) && (buffer[1] == ':')) {
-+		jffs2_bbc_print1("jffs2.bbc: disabling a compressor... ");
-+		if (jffs2_bbc_disable_compressor_by_name(buffer + 2) == 0) {
-+			jffs2_bbc_print1("done.\n");
-+		}
-+		else {
-+			jffs2_bbc_print1("not found.\n");
-+		}
-+		jffs2_bbc_free(buffer);
-+		return count;
-+	}
-+	else if (((*buffer == '1')) && (count >= 3) && (buffer[1] == ':')) {
-+		jffs2_bbc_print1("jffs2.bbc: enabling a compressor... ");
-+		if (jffs2_bbc_enable_compressor_by_name(buffer + 2) == 0) {
-+			jffs2_bbc_print1("done.\n");
-+		}
-+		else {
-+			jffs2_bbc_print1("not found.\n");
-+		}
-+		jffs2_bbc_free(buffer);
-+		return count;
-+	}
-+	else if (((*buffer == 'c') || (*buffer == 'C')) && (count >= 3) && (buffer[1] == ':')) {
-+		jffs2_bbc_compressor_command_by_name(buffer + 2);
-+		jffs2_bbc_free(buffer);
-+		return count;
-+	}
-+	else if ((*buffer == 'r') || (*buffer == 'R')) {
-+		jffs2_bbc_print1("jffs2.bbc: reloading model files:\n");
-+		sb_l = sb_list;
-+		while (sb_l != NULL) {
-+			jffs2_bbc_unload_model(sb_l->sb);
-+			jffs2_bbc_load_model(sb_l->sb);
-+			sb_l = sb_l->next;
-+		}
-+		jffs2_bbc_free(buffer);
-+		return count;
-+	}
-+	else if (((buffer[0] == 'f') || (buffer[0] == 'F'))&&((buffer[1] == 'r') || (buffer[1] == 'R'))) {
-+		jffs2_bbc_set_compression_mode(JFFS2_BBC_FASTR_MODE);
-+		jffs2_bbc_print1("jffs2.bbc: FASTR compression mode activated.\n");
-+		jffs2_bbc_free(buffer);
-+		return count;
-+	}
-+	else if (((buffer[0] == 'f') || (buffer[0] == 'F'))&&((buffer[1] == 'w') || (buffer[1] == 'W'))) {
-+		jffs2_bbc_set_compression_mode(JFFS2_BBC_FASTW_MODE);
-+		jffs2_bbc_print1("jffs2.bbc: FASTW compression mode activated.\n");
-+		jffs2_bbc_free(buffer);
-+		return count;
-+	}
-+	else if (((buffer[0] == 'f') || (buffer[0] == 'F'))&&((buffer[1] == 's') || (buffer[1] == 'S'))) {
-+		jffs2_bbc_set_compression_mode(JFFS2_BBC_FASTS_MODE);
-+		jffs2_bbc_print1("jffs2.bbc: FASTS compression mode activated.\n");
-+		jffs2_bbc_free(buffer);
-+		return count;
-+	}
-+	
-+	jffs2_bbc_print1("jffs2.bbc: unkown command. Valid commands are:\n" 
-+	                 "  z                         = switch to ZLIB compression mode\n" 
-+			 "  s                         = switch to SIZE compression mode\n" 
-+			 "  d                         = switch to DUMMY compression mode\n" 
-+			 "  fr                        = switch to FASTR compression mode\n" 
-+			 "  fw                        = switch to FASTW compression mode\n" 
-+			 "  fs                        = switch to FASTS compression mode\n" 
-+			 "  r                         = reread model files from actual file system\n" 
-+			 "  m:compressor_name         = switch to MANUAL compression mode\n" 
-+			 "  0:compressor_name         = disable a compressor\n" 
-+			 "  1:compressor_name         = enable a compressor\n" 
-+			 "  c:compressor_name:command = enable a compressor\n");
-+	jffs2_bbc_free(buffer);
-+	return count;
-+}
-+
-+void jffs2_bbc_proc_init()
-+{
-+	struct proc_dir_entry *res = create_proc_entry("jffs2_bbc", 0, NULL);
-+	jffs2_bbc_compressor_init();
-+	if (res) {
-+		res->read_proc = jffs2_bbc_proc_read;
-+		res->write_proc = jffs2_bbc_proc_write;
-+	}
-+}
-+
-+void jffs2_bbc_proc_deinit()
-+{
-+	jffs2_bbc_compressor_deinit();
-+	remove_proc_entry("jffs2_bbc", NULL);
-+}
-diff -Nur linux-mips-cvs/fs/jffs2/jffs2_bbc_fs.h linux-mips/fs/jffs2/jffs2_bbc_fs.h
---- linux-mips-cvs/fs/jffs2/jffs2_bbc_fs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/jffs2_bbc_fs.h	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,30 @@
-+/*
-+ * JFFS2 BBC: File System Extension for Linux Kernel - headers
-+ *
-+ * $Id: 301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+ *
-+ * Copyright (C) 2004, Ferenc Havasi
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-+ *
-+ */
-+
-+extern int jffs2_bbc_inode_not_found;
-+
-+void jffs2_bbc_load_model(void *sb);
-+void jffs2_bbc_unload_model(void *sb);
-+
-+void jffs2_bbc_proc_init(void);
-+void jffs2_bbc_proc_deinit(void);
-diff -Nur linux-mips-cvs/fs/jffs2/jffs2_bbc_lzari_comp.c linux-mips/fs/jffs2/jffs2_bbc_lzari_comp.c
---- linux-mips-cvs/fs/jffs2/jffs2_bbc_lzari_comp.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/jffs2_bbc_lzari_comp.c	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,788 @@
-+/* -*- Mode: C; indent-tabs-mode: t; c-basic-offset: 4; tab-width: 4 -*- */
-+
-+/*
-+   jffs2_bbc_lzari_comp.c -- Lempel-Ziv-Arithmetic coding compression module for jffs2
-+   Copyright (C) 2004 Patrik Kluba
-+   Based on the LZARI source included in LDS (lossless datacompression sources)
-+   Block-compression and bitstream modifications by Patrik Kluba
-+   $Header: /openwrt/openwrt/package/linux/kernel-patches/301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*/
-+
-+/*
-+Original copyright follows:
-+
-+**************************************************************
-+	LZARI.C -- A Data Compression Program
-+	(tab = 4 spaces)
-+**************************************************************
-+	4/7/1989 Haruhiko Okumura
-+	Use, distribute, and modify this program freely.
-+	Please send me your improved versions.
-+		PC-VAN		SCIENCE
-+		NIFTY-Serve	PAF01022
-+		CompuServe	74050,1022
-+**************************************************************
-+
-+LZARI.C (c)1989 by Haruyasu Yoshizaki, Haruhiko Okumura, and Kenji Rikitake.
-+All rights reserved. Permission granted for non-commercial use.
-+
-+*/
-+
-+/*
-+
-+	2004-02-18  pajko <pajko(AT)halom(DOT)u-szeged(DOT)hu>
-+				Removed unused variables and fixed no return value
-+
-+	2004-02-16  pajko <pajko(AT)halom(DOT)u-szeged(DOT)hu>
-+				Initial release
-+
-+*/
-+
-+/* lzari.c */
-+
-+#define N		 4096	/* size of ring buffer */
-+#define F		   60	/* upper limit for match_length */
-+#define THRESHOLD	2   /* encode string into position and length
-+						   if match_length is greater than this */
-+#define NIL			N	/* index for root of binary search trees */
-+
-+static unsigned char
-+		text_buf[N + F - 1];	/* ring buffer of size N,
-+			with extra F-1 bytes to facilitate string comparison */
-+static unsigned long		match_position, match_length,  /* of longest match.  These are
-+			set by the InsertNode() procedure. */
-+		lson[N + 1], rson[N + 257], dad[N + 1];  /* left & right children &
-+			parents -- These constitute binary search trees. */
-+
-+static void InitTree(void)  /* Initialize trees */
-+{
-+	unsigned long  i;
-+
-+	/* For i = 0 to N - 1, rson[i] and lson[i] will be the right and
-+	   left children of node i.  These nodes need not be initialized.
-+	   Also, dad[i] is the parent of node i.  These are initialized to
-+	   NIL (= N), which stands for 'not used.'
-+	   For i = 0 to 255, rson[N + i + 1] is the root of the tree
-+	   for strings that begin with character i.  These are initialized
-+	   to NIL.  Note there are 256 trees. */
-+
-+	for (i = N + 1; i <= N + 256; i++) rson[i] = NIL;	/* root */
-+	for (i = 0; i < N; i++) dad[i] = NIL;	/* node */
-+}
-+
-+static void InsertNode(unsigned long r)
-+	/* Inserts string of length F, text_buf[r..r+F-1], into one of the
-+	   trees (text_buf[r]'th tree) and returns the longest-match position
-+	   and length via the global variables match_position and match_length.
-+	   If match_length = F, then removes the old node in favor of the new
-+	   one, because the old one will be deleted sooner.
-+	   Note r plays double role, as tree node and position in buffer. */
-+{
-+	unsigned long i, p, temp;
-+	unsigned char *key;
-+	signed long cmp;
-+
-+	cmp = 1;  key = &text_buf[r];  p = N + 1 + key[0];
-+	rson[r] = lson[r] = NIL;  match_length = 0;
-+	for ( ; ; ) {
-+		if (cmp >= 0) {
-+			if (rson[p] != NIL) p = rson[p];
-+			else {  rson[p] = r;  dad[r] = p;  return;  }
-+		} else {
-+			if (lson[p] != NIL) p = lson[p];
-+			else {  lson[p] = r;  dad[r] = p;  return;  }
-+		}
-+		for (i = 1; i < F; i++)
-+			if ((cmp = key[i] - text_buf[p + i]) != 0)  break;
-+		if (i > THRESHOLD) {
-+			if (i > match_length) {
-+				match_position = (r - p) & (N - 1);
-+				if ((match_length = i) >= F) break;
-+			} else if (i == match_length) {
-+				if ((temp = (r - p) & (N - 1)) < match_position)
-+					match_position = temp;
-+			}
-+		}
-+	}
-+	dad[r] = dad[p];  lson[r] = lson[p];  rson[r] = rson[p];
-+	dad[lson[p]] = r;  dad[rson[p]] = r;
-+	if (rson[dad[p]] == p) rson[dad[p]] = r;
-+	else                   lson[dad[p]] = r;
-+	dad[p] = NIL;  /* remove p */
-+}
-+
-+static void DeleteNode(unsigned long p)  /* Delete node p from tree */
-+{
-+	unsigned long  q;
-+	
-+	if (dad[p] == NIL) return;  /* not in tree */
-+	if (rson[p] == NIL) q = lson[p];
-+	else if (lson[p] == NIL) q = rson[p];
-+	else {
-+		q = lson[p];
-+		if (rson[q] != NIL) {
-+			do {  q = rson[q];  } while (rson[q] != NIL);
-+			rson[dad[q]] = lson[q];  dad[lson[q]] = dad[q];
-+			lson[q] = lson[p];  dad[lson[p]] = q;
-+		}
-+		rson[q] = rson[p];  dad[rson[p]] = q;
-+	}
-+	dad[q] = dad[p];
-+	if (rson[dad[p]] == p) rson[dad[p]] = q;
-+	else                   lson[dad[p]] = q;
-+	dad[p] = NIL;
-+}
-+
-+/********** Arithmetic Compression **********/
-+
-+/*  If you are not familiar with arithmetic compression, you should read
-+		I. E. Witten, R. M. Neal, and J. G. Cleary,
-+			Communications of the ACM, Vol. 30, pp. 520-540 (1987),
-+	from which much have been borrowed.  */
-+
-+#define M   15
-+
-+/*	Q1 (= 2 to the M) must be sufficiently large, but not so
-+	large as the unsigned long 4 * Q1 * (Q1 - 1) overflows.  */
-+
-+#define Q1  (1UL << M)
-+#define Q2  (2 * Q1)
-+#define Q3  (3 * Q1)
-+#define Q4  (4 * Q1)
-+#define MAX_CUM (Q1 - 1)
-+
-+#define N_CHAR  (256 - THRESHOLD + F)
-+	/* character code = 0, 1, ..., N_CHAR - 1 */
-+
-+static unsigned long char_to_sym[N_CHAR], sym_to_char[N_CHAR + 1];
-+static unsigned long
-+	sym_freq[N_CHAR + 1],  /* frequency for symbols */
-+	sym_cum[N_CHAR + 1],   /* cumulative freq for symbols */
-+	position_cum[N + 1];   /* cumulative freq for positions */
-+
-+static void StartModel(void)  /* Initialize model */
-+{
-+	unsigned long ch, sym, i;
-+	
-+	sym_cum[N_CHAR] = 0;
-+	for (sym = N_CHAR; sym >= 1; sym--) {
-+		ch = sym - 1;
-+		char_to_sym[ch] = sym;  sym_to_char[sym] = ch;
-+		sym_freq[sym] = 1;
-+		sym_cum[sym - 1] = sym_cum[sym] + sym_freq[sym];
-+	}
-+	sym_freq[0] = 0;  /* sentinel (!= sym_freq[1]) */
-+	position_cum[N] = 0;
-+	for (i = N; i >= 1; i--)
-+		position_cum[i - 1] = position_cum[i] + 10000 / (i + 200);
-+			/* empirical distribution function (quite tentative) */
-+			/* Please devise a better mechanism! */
-+}
-+
-+static void UpdateModel(unsigned long sym)
-+{
-+	unsigned long c, ch_i, ch_sym;
-+	unsigned long i;
-+	if (sym_cum[0] >= MAX_CUM) {
-+		c = 0;
-+		for (i = N_CHAR; i > 0; i--) {
-+			sym_cum[i] = c;
-+			c += (sym_freq[i] = (sym_freq[i] + 1) >> 1);
-+		}
-+		sym_cum[0] = c;
-+	}
-+	for (i = sym; sym_freq[i] == sym_freq[i - 1]; i--) ;
-+	if (i < sym) {
-+		ch_i = sym_to_char[i];    ch_sym = sym_to_char[sym];
-+		sym_to_char[i] = ch_sym;  sym_to_char[sym] = ch_i;
-+		char_to_sym[ch_i] = sym;  char_to_sym[ch_sym] = i;
-+	}
-+	sym_freq[i]++;
-+	while (--i > 0) sym_cum[i]++;
-+	sym_cum[0]++;
-+}
-+
-+static unsigned long BinarySearchSym(unsigned long x)
-+	/* 1      if x >= sym_cum[1],
-+	   N_CHAR if sym_cum[N_CHAR] > x,
-+	   i such that sym_cum[i - 1] > x >= sym_cum[i] otherwise */
-+{
-+	unsigned long i, j, k;
-+	
-+	i = 1;  j = N_CHAR;
-+	while (i < j) {
-+		k = (i + j) / 2;
-+		if (sym_cum[k] > x) i = k + 1;  else j = k;
-+	}
-+	return i;
-+}
-+
-+unsigned long BinarySearchPos(unsigned long x)
-+	/* 0 if x >= position_cum[1],
-+	   N - 1 if position_cum[N] > x,
-+	   i such that position_cum[i] > x >= position_cum[i + 1] otherwise */
-+{
-+	unsigned long i, j, k;
-+	
-+	i = 1;  j = N;
-+	while (i < j) {
-+		k = (i + j) / 2;
-+		if (position_cum[k] > x) i = k + 1;  else j = k;
-+	}
-+	return i - 1;
-+}
-+
-+/* modified for block compression */
-+/* on return, srclen will contain the number of successfully compressed bytes
-+   and dstlen will contain completed compressed bytes */
-+
-+static int Encode(unsigned char *srcbuf, unsigned char *dstbuf, unsigned long *srclen,
-+			unsigned long *dstlen)
-+{
-+	unsigned long c, i, len, r, s, last_match_length, sym, range;
-+	unsigned long low = 0;
-+	unsigned long high = Q4;
-+	unsigned long shifts = 0;  /* counts for magnifying low and high around Q2 */
-+	unsigned char *ip, *op;
-+	unsigned long written = 0;
-+	unsigned long read = 0;
-+	unsigned char buffer = 0;
-+	unsigned char mask = 128;
-+	unsigned char *srcend = srcbuf + *srclen;
-+	unsigned char *dstend = dstbuf + *dstlen;
-+	ip = srcbuf;
-+	op = dstbuf;
-+	StartModel();
-+	InitTree();  /* initialize trees */
-+	s = 0;  r = N - F;
-+	for (i = s; i < r; i++) text_buf[i] = ' ';  /* Clear the buffer with
-+		any character that will appear often. */
-+	for (len = 0; (len < F) && (ip < srcend); len++)
-+		text_buf[r + len] = *(ip++);  /* Read F bytes into the last F bytes of
-+			the buffer */
-+	read = len;
-+	for (i = 1; i <= F; i++) InsertNode(r - i);  /* Insert the F strings,
-+		each of which begins with one or more 'space' characters.  Note
-+		the order in which these strings are inserted.  This way,
-+		degenerate trees will be less likely to occur. */
-+	InsertNode(r);  /* Finally, insert the whole string just read.  The
-+		global variables match_length and match_position are set. */
-+	do {
-+		if (match_length > len) match_length = len;  /* match_length
-+			may be spuriously long near the end of text. */
-+		if (match_length <= THRESHOLD) {
-+			match_length = 1;  /* Not long enough match.  Send one byte. */
-+			sym = char_to_sym[text_buf[r]];
-+			range = high - low;
-+			high = low + (range * sym_cum[sym - 1]) / sym_cum[0];
-+			low +=       (range * sym_cum[sym    ]) / sym_cum[0];
-+			for ( ; ; ) {
-+				if (high <= Q2) {
-+					if ((mask >>= 1) == 0) {
-+						if (op >= dstend) {
-+							*dstlen = written;
-+							return -1;
-+						}
-+						*(op++) = buffer;
-+						buffer = 0;
-+						mask = 128;
-+						written++;
-+						*srclen = read;
-+					}
-+					for ( ; shifts > 0; shifts--) {
-+						buffer |= mask;
-+						if ((mask >>= 1) == 0) {
-+							if (op >= dstend) {
-+								*dstlen = written;
-+								return -1;
-+							}
-+							*(op++) = buffer;
-+							buffer = 0;
-+							mask = 128;
-+							written++;
-+							*srclen = read;
-+						}
-+					}
-+				} else if (low >= Q2) {
-+					buffer |= mask;
-+					if ((mask >>= 1) == 0) {
-+						if (op >= dstend) {
-+							*dstlen = written;
-+							return -1;
-+						}
-+						*(op++) = buffer;
-+						buffer = 0;
-+						mask = 128;
-+						written++;
-+						*srclen = read;
-+					}
-+					for ( ; shifts > 0; shifts--) {
-+						if ((mask >>= 1) == 0) {
-+							if (op >= dstend) {
-+								*dstlen = written;
-+								return -1;
-+							}
-+							*(op++) = buffer;
-+							buffer = 0;
-+							mask = 128;
-+							written++;
-+							*srclen = read;
-+						}
-+					}
-+					low -= Q2;
-+					high -= Q2;
-+				} else if (low >= Q1 && high <= Q3) {
-+					shifts++;
-+					low -= Q1;
-+					high -= Q1;
-+				} else break;
-+				low += low;  high += high;
-+			}
-+			UpdateModel(sym);
-+		} else {
-+			sym = char_to_sym[255 - THRESHOLD + match_length];
-+			range = high - low;
-+			high = low + (range * sym_cum[sym - 1]) / sym_cum[0];
-+			low +=       (range * sym_cum[sym    ]) / sym_cum[0];
-+			for ( ; ; ) {
-+				if (high <= Q2) {
-+					if ((mask >>= 1) == 0) {
-+						if (op >= dstend) {
-+							*dstlen = written;
-+							return -1;
-+						}
-+						*(op++) = buffer;
-+						buffer = 0;
-+						mask = 128;
-+						written++;
-+						*srclen = read;
-+					}
-+					for ( ; shifts > 0; shifts--) {
-+						buffer |= mask;
-+						if ((mask >>= 1) == 0) {
-+							if (op >= dstend) {
-+								*dstlen = written;
-+								return -1;
-+							}
-+							*(op++) = buffer;
-+							buffer = 0;
-+							mask = 128;
-+							written++;
-+							*srclen = read;
-+						}
-+					}
-+				} else if (low >= Q2) {
-+					buffer |= mask;
-+					if ((mask >>= 1) == 0) {
-+						if (op >= dstend) {
-+							*dstlen = written;
-+							return -1;
-+						}
-+						*(op++) = buffer;
-+						buffer = 0;
-+						mask = 128;
-+						written++;
-+						*srclen = read;
-+					}
-+					for ( ; shifts > 0; shifts--) {
-+						if ((mask >>= 1) == 0) {
-+							if (op >= dstend) {
-+								*dstlen = written;
-+								return -1;
-+							}
-+							*(op++) = buffer;
-+							buffer = 0;
-+							mask = 128;
-+							written++;
-+							*srclen = read;
-+						}
-+					}
-+					low -= Q2;
-+					high -= Q2;
-+				} else if (low >= Q1 && high <= Q3) {
-+					shifts++;
-+					low -= Q1;
-+					high -= Q1;
-+				} else break;
-+				low += low;  high += high;
-+			}
-+			UpdateModel(sym);
-+			range = high - low;
-+			high = low + (range * position_cum[match_position - 1]) / position_cum[0];
-+			low +=       (range * position_cum[match_position    ]) / position_cum[0];
-+			for ( ; ; ) {
-+				if (high <= Q2) {
-+					if ((mask >>= 1) == 0) {
-+						if (op >= dstend) {
-+							*dstlen = written;
-+							return -1;
-+						}
-+						*(op++) = buffer;
-+						buffer = 0;
-+						mask = 128;
-+						written++;
-+						*srclen = read;
-+					}
-+					for ( ; shifts > 0; shifts--) {
-+						buffer |= mask;
-+						if ((mask >>= 1) == 0) {
-+							if (op >= dstend) {
-+								*dstlen = written;
-+								return -1;
-+							}
-+							*(op++) = buffer;
-+							buffer = 0;
-+							mask = 128;
-+							written++;
-+							*srclen = read;
-+						}
-+					}
-+				} else {
-+					if (low >= Q2) {
-+						buffer |= mask;
-+						if ((mask >>= 1) == 0) {
-+							if (op >= dstend) {
-+								*dstlen = written;
-+								return -1;
-+							}
-+							*(op++) = buffer;
-+							buffer = 0;
-+							mask = 128;
-+							written++;
-+							*srclen = read;
-+						}
-+						for ( ; shifts > 0; shifts--) {
-+							if ((mask >>= 1) == 0) {
-+								if (op >= dstend) {
-+									*dstlen = written;
-+									return -1;
-+								}
-+								*(op++) = buffer;
-+								buffer = 0;
-+								mask = 128;
-+								written++;
-+								*srclen = read;
-+							}
-+						}
-+						low -= Q2;
-+						high -= Q2;
-+					} else {
-+						if ((low >= Q1) && (high <= Q3)) {
-+							shifts++;
-+							low -= Q1;
-+							high -= Q1;
-+						} else {
-+							break;
-+						}
-+					}
-+				}
-+				low += low;
-+				high += high;
-+			}
-+		}
-+		last_match_length = match_length;
-+		for (i = 0; (i < last_match_length) && (ip < srcend); i++) {
-+			c = *(ip++);
-+			DeleteNode(s);
-+			text_buf[s] = c;
-+			if (s < F - 1)
-+				text_buf[s + N] = c;
-+			s = (s + 1) & (N - 1);
-+			r = (r + 1) & (N - 1);
-+			InsertNode(r);
-+		}
-+		read += i;
-+		while (i++ < last_match_length) {
-+			DeleteNode(s);
-+			s = (s + 1) & (N - 1);
-+			r = (r + 1) & (N - 1);
-+			if (--len) InsertNode(r);
-+		}
-+	} while (len > 0);
-+	shifts++;
-+	if (low < Q1) {
-+		if ((mask >>= 1) == 0) {
-+			if (op >= dstend) {
-+				*dstlen = written;
-+				return -1;
-+			}
-+			*(op++) = buffer;
-+			buffer = 0;
-+			mask = 128;
-+			written++;
-+			*srclen = read;
-+		}
-+		for ( ; shifts > 0; shifts--) {
-+			buffer |= mask;
-+			if ((mask >>= 1) == 0) {
-+				if (op >= dstend) {
-+					*dstlen = written;
-+					return -1;
-+				}
-+				*(op++) = buffer;
-+				buffer = 0;
-+				mask = 128;
-+				written++;
-+				*srclen = read;
-+			}
-+		}
-+	} else {
-+		buffer |= mask;
-+		if ((mask >>= 1) == 0) {
-+			if (op >= dstend) {
-+				*dstlen = written;
-+				return -1;
-+			}
-+			*(op++) = buffer;
-+			buffer = 0;
-+			mask = 128;
-+			written++;
-+			*srclen = read;
-+		}
-+		for ( ; shifts > 0; shifts--) {
-+			if ((mask >>= 1) == 0) {
-+				if (op >= dstend) {
-+					*dstlen = written;
-+					return -1;
-+				}
-+				*(op++) = buffer;
-+				buffer = 0;
-+				mask = 128;
-+				written++;
-+				*srclen = read;
-+			}
-+		}
-+	}
-+	for (i = 0; i < 7; i++) {
-+		if ((mask >>= 1) == 0) {
-+			if (op >= dstend) {
-+				*dstlen = written;
-+				return -1;
-+			}
-+			*(op++) = buffer;
-+			buffer = 0;
-+			mask = 128;
-+			written++;
-+			*srclen = read;
-+		}
-+	}
-+	*dstlen = written;
-+	return 0;
-+}
-+
-+static int Decode(unsigned char *srcbuf, unsigned char *dstbuf, unsigned long srclen,
-+					unsigned long dstlen)	/* Just the reverse of Encode(). */
-+{
-+	unsigned long i, r, j, k, c, range, sym;
-+	unsigned char *ip, *op;
-+	unsigned char *srcend = srcbuf + srclen;
-+	unsigned char *dstend = dstbuf + dstlen;
-+	unsigned char buffer = 0;
-+	unsigned char mask = 0;
-+	unsigned long low = 0;
-+	unsigned long high = Q4;
-+	unsigned long value = 0;
-+	ip = srcbuf;
-+	op = dstbuf;
-+	for (i = 0; i < M + 2; i++) {
-+		value *= 2;
-+		if ((mask >>= 1) == 0) {
-+			buffer = (ip >= srcend) ? 0 : *(ip++);
-+			mask = 128;
-+		}
-+		value += ((buffer & mask) != 0);
-+	}
-+	StartModel();
-+	for (i = 0; i < N - F; i++) text_buf[i] = ' ';
-+	r = N - F;
-+	while (op < dstend) {
-+		range = high - low;
-+		sym = BinarySearchSym((unsigned long)
-+				(((value - low + 1) * sym_cum[0] - 1) / range));
-+		high = low + (range * sym_cum[sym - 1]) / sym_cum[0];
-+		low +=       (range * sym_cum[sym    ]) / sym_cum[0];
-+		for ( ; ; ) {
-+			if (low >= Q2) {
-+				value -= Q2;  low -= Q2;  high -= Q2;
-+			} else if (low >= Q1 && high <= Q3) {
-+				value -= Q1;  low -= Q1;  high -= Q1;
-+			} else if (high > Q2) break;
-+			low += low;  high += high;
-+			value *= 2;
-+			if ((mask >>= 1) == 0) {
-+				buffer = (ip >= srcend) ? 0 : *(ip++);
-+				mask = 128;
-+			}
-+			value += ((buffer & mask) != 0);
-+		}
-+		c = sym_to_char[sym];
-+		UpdateModel(sym);
-+		if (c < 256) {
-+			if (op >= dstend) return -1;
-+			*(op++) = c;
-+			text_buf[r++] = c;
-+			r &= (N - 1);
-+		} else {
-+			j = c - 255 + THRESHOLD;
-+			range = high - low;
-+			i = BinarySearchPos((unsigned long)
-+				(((value - low + 1) * position_cum[0] - 1) / range));
-+			high = low + (range * position_cum[i    ]) / position_cum[0];
-+			low +=       (range * position_cum[i + 1]) / position_cum[0];
-+			for ( ; ; ) {
-+				if (low >= Q2) {
-+					value -= Q2;  low -= Q2;  high -= Q2;
-+				} else if (low >= Q1 && high <= Q3) {
-+					value -= Q1;  low -= Q1;  high -= Q1;
-+				} else if (high > Q2) break;
-+				low += low;  high += high;
-+				value *= 2;
-+				if ((mask >>= 1) == 0) {
-+					buffer = (ip >= srcend) ? 0 : *(ip++);
-+					mask = 128;
-+				}
-+				value += ((buffer & mask) != 0);
-+			}
-+			i = (r - i - 1) & (N - 1);
-+			for (k = 0; k < j; k++) {
-+				c = text_buf[(i + k) & (N - 1)];
-+				if (op >= dstend) return -1;
-+				*(op++) = c;
-+				text_buf[r++] = c;
-+				r &= (N - 1);
-+			}		
-+		}
-+	}
-+	return 0;
-+}
-+
-+/* interface to jffs2 bbc follows */
-+
-+#include "jffs2_bbc_framework.h"
-+
-+#define JFFS2_BBC_LZARI_BLOCK_SIGN {0x73, 0x9a, 0x1c, 0x4d}
-+
-+static int
-+jffs2_bbc_lzari_compressor_init (void);
-+
-+static void
-+jffs2_bbc_lzari_compressor_deinit (void);
-+
-+static int
-+jffs2_bbc_lzari_compress (void *model, unsigned char *input,
-+			unsigned char *output, unsigned long *sourcelen,
-+			unsigned long *dstlen);
-+
-+static int
-+jffs2_bbc_lzari_estimate (void *model, unsigned char *input,
-+			unsigned long sourcelen, unsigned long *dstlen,
-+			unsigned long *readtime, unsigned long *writetime);
-+
-+static int
-+jffs2_bbc_lzari_decompress (void *model, unsigned char *input,
-+			  unsigned char *output, unsigned long sourcelen,
-+			  unsigned long dstlen);
-+
-+static char *
-+jffs2_bbc_lzari_proc_info (void);
-+
-+static int
-+jffs2_bbc_lzari_proc_command (char *command);
-+
-+struct jffs2_bbc_compressor_type jffs2_bbc_lzari = {
-+	"lzari",
-+	0,
-+	JFFS2_BBC_LZARI_BLOCK_SIGN,
-+	jffs2_bbc_lzari_compressor_init,
-+	NULL,
-+	NULL,
-+	jffs2_bbc_lzari_compressor_deinit,
-+	jffs2_bbc_lzari_compress,
-+	jffs2_bbc_lzari_estimate,
-+	jffs2_bbc_lzari_decompress,
-+	jffs2_bbc_lzari_proc_info,
-+	jffs2_bbc_lzari_proc_command
-+};
-+
-+static int
-+jffs2_bbc_lzari_compressor_init (void)
-+{
-+	return 0;
-+}
-+
-+static void
-+jffs2_bbc_lzari_compressor_deinit (void)
-+{
-+}
-+
-+static int
-+jffs2_bbc_lzari_compress (void *model, unsigned char *input,
-+			unsigned char *output, unsigned long *sourcelen,
-+			unsigned long *dstlen)
-+{
-+	int retval;
-+	unsigned long dst = *dstlen;
-+	*(output++) = jffs2_bbc_lzari.block_sign[0];
-+	*(output++) = jffs2_bbc_lzari.block_sign[1];
-+	dst -= 2;
-+	retval = Encode(input, output, sourcelen, &dst);
-+	dst += 2;
-+	*dstlen = dst;
-+	return retval;
-+}
-+
-+static int
-+jffs2_bbc_lzari_estimate (void *model, unsigned char *input,
-+			unsigned long sourcelen, unsigned long *dstlen,
-+			unsigned long *readtime, unsigned long *writetime)
-+{
-+	*dstlen = sourcelen / 2;
-+	*readtime = JFFS2_BBC_ZLIB_READ_TIME * 15;
-+	*writetime = JFFS2_BBC_ZLIB_WRITE_TIME * 7;
-+	return 0;
-+}
-+
-+static int
-+jffs2_bbc_lzari_decompress (void *model, unsigned char *input,
-+			  unsigned char *output, unsigned long sourcelen,
-+			  unsigned long dstlen)
-+{
-+	if (	( *(input++) != (unsigned char)jffs2_bbc_lzari.block_sign[0] ) ||
-+			( *(input++) != (unsigned char)jffs2_bbc_lzari.block_sign[1] )
-+	   ) {
-+		return -1;
-+	} else {
-+		return Decode(input, output, sourcelen - 2, dstlen);
-+	}
-+}
-+
-+static char *
-+jffs2_bbc_lzari_proc_info (void)
-+{
-+	return "Lempel-Ziv-Arithmetic coding compression module";
-+}
-+
-+static int
-+jffs2_bbc_lzari_proc_command (char *command)
-+{
-+	return 0;
-+}
-+
-+struct jffs2_bbc_compressor_type *
-+jffs2_bbc_lzari_init (int mode)
-+{
-+	if (jffs2_bbc_register_compressor (&jffs2_bbc_lzari) == 0)
-+	{
-+		return &jffs2_bbc_lzari;
-+	}
-+	else
-+	{
-+		return NULL;
-+	}
-+}
-+
-+void
-+jffs2_bbc_lzari_deinit (void)
-+{
-+	jffs2_bbc_unregister_compressor (&jffs2_bbc_lzari);
-+}
-diff -Nur linux-mips-cvs/fs/jffs2/jffs2_bbc_lzhd_comp.c linux-mips/fs/jffs2/jffs2_bbc_lzhd_comp.c
---- linux-mips-cvs/fs/jffs2/jffs2_bbc_lzhd_comp.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/jffs2_bbc_lzhd_comp.c	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,747 @@
-+/* -*- Mode: C; indent-tabs-mode: t; c-basic-offset: 4; tab-width: 4 -*- */
-+
-+/*
-+   jffs2_bbc_lzhd_comp.c -- Lempel-Ziv-(dynamic) Huffman compression module for jffs2
-+   Copyright (C) 2004 Patrik Kluba
-+   Based on the LZHUF source included in LDS (lossless datacompression sources)
-+   Block-compression and bitstream modifications by Patrik Kluba
-+   $Header: /openwrt/openwrt/package/linux/kernel-patches/301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*/
-+
-+/*
-+Original copyright follows:
-+
-+**************************************************************
-+	lzhuf.c
-+	written by Haruyasu Yoshizaki 11/20/1988
-+	some minor changes 4/6/1989
-+	comments translated by Haruhiko Okumura 4/7/1989
-+**************************************************************
-+
-+LZHUF.C (c)1989 by Haruyasu Yoshizaki, Haruhiko Okumura, and Kenji Rikitake.
-+All rights reserved. Permission granted for non-commercial use.
-+
-+*/
-+
-+/*
-+
-+	2004-02-18  pajko <pajko(AT)halom(DOT)u-szeged(DOT)hu>
-+				Replaced name lzh-d with lzhd
-+				Fixed no return value
-+
-+	2004-02-16  pajko <pajko(AT)halom(DOT)u-szeged(DOT)hu>
-+				Initial release
-+
-+*/
-+
-+/* required because of memmove */
-+#ifndef __KERNEL__
-+  #include <string.h>
-+#else
-+  #include <linux/string.h>
-+#endif
-+
-+/* lzhuf.c */
-+
-+#define N		 4096	/* size of ring buffer */
-+#define F		   60	/* upper limit for match_length */
-+#define THRESHOLD	2   /* encode string into position and length
-+						   if match_length is greater than this */
-+#define NIL			N	/* index for root of binary search trees */
-+
-+static unsigned char
-+		text_buf[N + F - 1];	/* ring buffer of size N,
-+			with extra F-1 bytes to facilitate string comparison */
-+static unsigned long		match_position, match_length,  /* of longest match.  These are
-+			set by the InsertNode() procedure. */
-+		lson[N + 1], rson[N + 257], dad[N + 1];  /* left & right children &
-+			parents -- These constitute binary search trees. */
-+
-+static void InitTree(void)  /* initialize trees */
-+{
-+	unsigned long  i;
-+
-+	/* For i = 0 to N - 1, rson[i] and lson[i] will be the right and
-+	   left children of node i.  These nodes need not be initialized.
-+	   Also, dad[i] is the parent of node i.  These are initialized to
-+	   NIL (= N), which stands for 'not used.'
-+	   For i = 0 to 255, rson[N + i + 1] is the root of the tree
-+	   for strings that begin with character i.  These are initialized
-+	   to NIL.  Note there are 256 trees. */
-+
-+	for (i = N + 1; i <= N + 256; i++) rson[i] = NIL;
-+	for (i = 0; i < N; i++) dad[i] = NIL;
-+}
-+
-+static void InsertNode(unsigned long r)
-+	/* Inserts string of length F, text_buf[r..r+F-1], into one of the
-+	   trees (text_buf[r]'th tree) and returns the longest-match position
-+	   and length via the global variables match_position and match_length.
-+	   If match_length = F, then removes the old node in favor of the new
-+	   one, because the old one will be deleted sooner.
-+	   Note r plays double role, as tree node and position in buffer. */
-+{
-+	unsigned long i, p, c;
-+	signed long cmp;
-+	unsigned char  *key;
-+	
-+	cmp = 1;  key = &text_buf[r];  p = N + 1 + key[0];
-+	rson[r] = lson[r] = NIL;  match_length = 0;
-+	for ( ; ; ) {
-+		if (cmp >= 0) {
-+			if (rson[p] != NIL) p = rson[p];
-+			else {  rson[p] = r;  dad[r] = p;  return;  }
-+		} else {
-+			if (lson[p] != NIL) p = lson[p];
-+			else {  lson[p] = r;  dad[r] = p;  return;  }
-+		}
-+		for (i = 1; i < F; i++)
-+			if ((cmp = key[i] - text_buf[p + i]) != 0)  break;
-+		if (i > THRESHOLD) {
-+			if (i > match_length) {
-+				match_position = ((r - p) & (N - 1)) - 1;
-+				if ((match_length = i) >= F)  break;
-+			}
-+			if (i == match_length) {
-+				if ((c = ((r - p) & (N - 1)) - 1) < match_position) {
-+					match_position = c;
-+				}
-+			}
-+		}
-+	}
-+	dad[r] = dad[p];  lson[r] = lson[p];  rson[r] = rson[p];
-+	dad[lson[p]] = r;  dad[rson[p]] = r;
-+	if (rson[dad[p]] == p) rson[dad[p]] = r;
-+	else                   lson[dad[p]] = r;
-+	dad[p] = NIL;  /* remove p */
-+}
-+
-+static void DeleteNode(unsigned long p)  /* deletes node p from tree */
-+{
-+	unsigned long  q;
-+	
-+	if (dad[p] == NIL) return;  /* not in tree */
-+	if (rson[p] == NIL) q = lson[p];
-+	else if (lson[p] == NIL) q = rson[p];
-+	else {
-+		q = lson[p];
-+		if (rson[q] != NIL) {
-+			do {  q = rson[q];  } while (rson[q] != NIL);
-+			rson[dad[q]] = lson[q];  dad[lson[q]] = dad[q];
-+			lson[q] = lson[p];  dad[lson[p]] = q;
-+		}
-+		rson[q] = rson[p];  dad[rson[p]] = q;
-+	}
-+	dad[q] = dad[p];
-+	if (rson[dad[p]] == p) rson[dad[p]] = q;  else lson[dad[p]] = q;
-+	dad[p] = NIL;
-+}
-+
-+/* Huffman coding */
-+
-+#define N_CHAR  	(256 - THRESHOLD + F)
-+				/* kinds of characters (character code = 0..N_CHAR-1) */
-+#define T 		(N_CHAR * 2 - 1)	/* size of table */
-+#define R 		(T - 1)			/* position of root */
-+#define MAX_FREQ	0x8000		/* updates tree when the */
-+					/* root frequency comes to this value. */
-+
-+typedef unsigned long uchar; // much-much faster
-+
-+/* table for encoding and decoding the upper 6 bits of position */
-+
-+/* for encoding */
-+static uchar p_len[64] = {
-+	0x03, 0x04, 0x04, 0x04, 0x05, 0x05, 0x05, 0x05,
-+	0x05, 0x05, 0x05, 0x05, 0x06, 0x06, 0x06, 0x06,
-+	0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-+	0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
-+	0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08
-+};
-+
-+static uchar p_code[64] = {
-+	0x00, 0x20, 0x30, 0x40, 0x50, 0x58, 0x60, 0x68,
-+	0x70, 0x78, 0x80, 0x88, 0x90, 0x94, 0x98, 0x9C,
-+	0xA0, 0xA4, 0xA8, 0xAC, 0xB0, 0xB4, 0xB8, 0xBC,
-+	0xC0, 0xC2, 0xC4, 0xC6, 0xC8, 0xCA, 0xCC, 0xCE,
-+	0xD0, 0xD2, 0xD4, 0xD6, 0xD8, 0xDA, 0xDC, 0xDE,
-+	0xE0, 0xE2, 0xE4, 0xE6, 0xE8, 0xEA, 0xEC, 0xEE,
-+	0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
-+	0xF8, 0xF9, 0xFA, 0xFB, 0xFC, 0xFD, 0xFE, 0xFF
-+};
-+
-+/* for decoding */
-+static uchar d_code[256] = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-+	0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
-+	0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
-+	0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
-+	0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
-+	0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-+	0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-+	0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-+	0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
-+	0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09,
-+	0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A,
-+	0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0B,
-+	0x0C, 0x0C, 0x0C, 0x0C, 0x0D, 0x0D, 0x0D, 0x0D,
-+	0x0E, 0x0E, 0x0E, 0x0E, 0x0F, 0x0F, 0x0F, 0x0F,
-+	0x10, 0x10, 0x10, 0x10, 0x11, 0x11, 0x11, 0x11,
-+	0x12, 0x12, 0x12, 0x12, 0x13, 0x13, 0x13, 0x13,
-+	0x14, 0x14, 0x14, 0x14, 0x15, 0x15, 0x15, 0x15,
-+	0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x17, 0x17,
-+	0x18, 0x18, 0x19, 0x19, 0x1A, 0x1A, 0x1B, 0x1B,
-+	0x1C, 0x1C, 0x1D, 0x1D, 0x1E, 0x1E, 0x1F, 0x1F,
-+	0x20, 0x20, 0x21, 0x21, 0x22, 0x22, 0x23, 0x23,
-+	0x24, 0x24, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27,
-+	0x28, 0x28, 0x29, 0x29, 0x2A, 0x2A, 0x2B, 0x2B,
-+	0x2C, 0x2C, 0x2D, 0x2D, 0x2E, 0x2E, 0x2F, 0x2F,
-+	0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
-+	0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F,
-+};
-+
-+static uchar d_len[256] = {
-+	0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
-+	0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
-+	0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
-+	0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
-+	0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-+	0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-+	0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-+	0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-+	0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-+	0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-+	0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-+	0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-+	0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-+	0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-+	0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-+	0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-+	0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-+	0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-+	0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-+	0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-+	0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-+	0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-+	0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-+	0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-+	0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
-+	0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
-+};
-+
-+static unsigned long freq[T + 1];	/* frequency table */
-+
-+static unsigned long prnt[T + N_CHAR];	/* pointers to parent nodes, except for the */
-+			/* elements [T..T + N_CHAR - 1] which are used to get */
-+			/* the positions of leaves corresponding to the codes. */
-+
-+static unsigned long son[T];		/* pointers to child nodes (son[], son[] + 1) */
-+
-+/* initialization of tree */
-+
-+static void StartHuff(void)
-+{
-+	unsigned long i, j;
-+
-+	for (i = 0; i < N_CHAR; i++) {
-+		freq[i] = 1;
-+		son[i] = i + T;
-+		prnt[i + T] = i;
-+	}
-+	i = 0; j = N_CHAR;
-+	while (j <= R) {
-+		freq[j] = freq[i] + freq[i + 1];
-+		son[j] = i;
-+		prnt[i] = prnt[i + 1] = j;
-+		i += 2; j++;
-+	}
-+	freq[T] = 0xffff;
-+	prnt[R] = 0;
-+}
-+
-+/* reconstruction of tree */
-+
-+static void reconst(void)
-+{
-+	unsigned long f, l, i, j, k;
-+
-+	/* collect leaf nodes in the first half of the table */
-+	/* and replace the freq by (freq + 1) / 2. */
-+	j = 0;
-+	for (i = 0; i < T; i++) {
-+		if (son[i] >= T) {
-+			freq[j] = (freq[i] + 1) / 2;
-+			son[j] = son[i];
-+			j++;
-+		}
-+	}
-+	/* begin constructing tree by connecting sons */
-+	for (i = 0, j = N_CHAR; j < T; i += 2, j++) {
-+		k = i + 1;
-+		f = freq[j] = freq[i] + freq[k];
-+		for (k = j - 1; f < freq[k]; k--);
-+		k++;
-+		l = (j - k) * 2;
-+		memmove(&freq[k + 1], &freq[k], l*sizeof(unsigned long));
-+		freq[k] = f;
-+		memmove(&son[k + 1], &son[k], l*sizeof(unsigned long));
-+		son[k] = i;
-+	}
-+	/* connect prnt */
-+	for (i = 0; i < T; i++) {
-+		if ((k = son[i]) >= T) {
-+			prnt[k] = i;
-+		} else {
-+			prnt[k] = prnt[k + 1] = i;
-+		}
-+	}
-+}
-+
-+/* increment frequency of given code by one, and update tree */
-+
-+static void update(unsigned long c)
-+{
-+	unsigned long i, j, k, l;
-+
-+	if (freq[R] == MAX_FREQ) {
-+		reconst();
-+	}
-+	c = prnt[c + T];
-+	do {
-+		k = ++freq[c];
-+
-+		/* if the order is disturbed, exchange nodes */
-+		if (k > freq[l = c + 1]) {
-+			while (k > freq[++l]);
-+			l--;
-+			freq[c] = freq[l];
-+			freq[l] = k;
-+
-+			i = son[c];
-+			prnt[i] = l;
-+			if (i < T) prnt[i + 1] = l;
-+
-+			j = son[l];
-+			son[l] = i;
-+
-+			prnt[j] = c;
-+			if (j < T) prnt[j + 1] = c;
-+			son[c] = j;
-+
-+			c = l;
-+		}
-+	} while (c = prnt[c]);	/* repeat up to root */
-+}
-+
-+/* modified for block compression */
-+/* on return, srclen will contain the number of successfully compressed bytes
-+   and dstlen will contain completed compressed bytes */
-+
-+static int Encode(unsigned char *srcbuf, unsigned char *dstbuf, unsigned long *srclen,
-+			unsigned long *dstlen)
-+{
-+	unsigned long c, i, j, k, len, r, s, last_match_length, code_buf_ptr;
-+	unsigned char code_buf[17], mask;
-+	unsigned char *ip, *op;
-+	unsigned long written = 0;
-+	unsigned long read = 0;
-+	unsigned short putbuf = 0;
-+	uchar putlen = 0;
-+	unsigned char *srcend = srcbuf + *srclen;
-+	unsigned char *dstend = dstbuf + *dstlen;
-+	ip = srcbuf;
-+	op = dstbuf;
-+	StartHuff();
-+	InitTree();  /* initialize trees */
-+	code_buf[0] = 0;  /* code_buf[1..16] saves eight units of code, and
-+		code_buf[0] works as eight flags, "1" representing that the unit
-+		is an unencoded letter (1 byte), "0" a position-and-length pair
-+		(2 bytes).  Thus, eight units require at most 16 bytes of code. */
-+	code_buf_ptr = mask = 1;
-+	s = 0;  r = N - F;
-+	for (i = s; i < r; i++) text_buf[i] = ' ';  /* Clear the buffer with
-+		any character that will appear often. */
-+	for (len = 0; (len < F) && (ip < srcend); len++)
-+		text_buf[r + len] = *(ip++);  /* Read F bytes into the last F bytes of
-+			the buffer */
-+	read = len;
-+	for (i = 1; i <= F; i++) InsertNode(r - i);  /* Insert the F strings,
-+		each of which begins with one or more 'space' characters.  Note
-+		the order in which these strings are inserted.  This way,
-+		degenerate trees will be less likely to occur. */
-+	InsertNode(r);  /* Finally, insert the whole string just read.  The
-+		global variables match_length and match_position are set. */
-+	do {
-+		if (match_length > len) match_length = len;  /* match_length
-+			may be spuriously long near the end of text. */
-+		if (match_length <= THRESHOLD) {
-+			match_length = 1;  /* Not long enough match.  Send one byte. */
-+			c = text_buf[r];
-+			i = 0; j = 0; k = prnt[c + T];
-+			do {
-+				i >>= 1;
-+				/* if node's address is odd-numbered, choose bigger brother node */
-+				if (k & 1) i |= 0x8000;
-+				j++;
-+			} while ((k = prnt[k]) != R);				
-+			putbuf |= i >> putlen;
-+			if ((putlen += j) >= 8) {
-+				if (op >= dstend) {
-+					*dstlen = written;
-+					return -1;
-+				}
-+				*(op++) = putbuf >> 8;
-+				if ((putlen -= 8) >= 8) {
-+					if (op >= dstend) {
-+						*dstlen = written;
-+						return -1;
-+					}
-+					*(op++) = putbuf;
-+					written += 2;
-+					putlen -= 8;
-+					putbuf = i << (j - putlen); /**warm**/
-+				} else {
-+					putbuf <<= 8;
-+					written++;
-+				}
-+				*srclen = read;
-+			}
-+			update(c);
-+		} else {
-+			c = 255 - THRESHOLD + match_length;
-+			i = 0; j = 0; k = prnt[c + T];
-+			do {
-+				i >>= 1;
-+				/* if node's address is odd-numbered, choose bigger brother node */
-+				if (k & 1) i |= 0x8000;
-+				j++;
-+			} while ((k = prnt[k]) != R);				
-+			putbuf |= i >> putlen;
-+			if ((putlen += j) >= 8) {
-+				if (op >= dstend) {
-+					*dstlen = written;
-+					return -1;
-+				}
-+				*(op++) = putbuf >> 8;
-+				if ((putlen -= 8) >= 8) {
-+					if (op >= dstend) {
-+						*dstlen = written;
-+						return -1;
-+					}
-+					*(op++) = putbuf;
-+					written += 2;
-+					putlen -= 8;
-+					putbuf = i << (j - putlen); /**warm**/
-+				} else {
-+					putbuf <<= 8;
-+					written++;
-+				}
-+				*srclen = read;
-+			}
-+			update(c);
-+			j = p_len[match_position >> 6];
-+			i = p_code[match_position >> 6] << 8;			
-+			putbuf |= i >> putlen;
-+			if ((putlen += j) >= 8) {
-+				if (op >= dstend) {
-+					*dstlen = written;
-+					return -1;
-+				}
-+				*(op++) = putbuf >> 8;
-+				if ((putlen -= 8) >= 8) {
-+					if (op >= dstend) {
-+						*dstlen = written;
-+						return -1;
-+					}
-+					*(op++) = putbuf;
-+					written += 2;
-+					putlen -= 8;
-+					putbuf = i << (j - putlen); /**hot**/
-+				} else {
-+					putbuf <<= 8;
-+					written++;
-+				}
-+				*srclen = read;
-+			}
-+			j = 6;
-+			i = (match_position & 0x3f) << 10;
-+			putbuf |= i >> putlen;
-+			if ((putlen += j) >= 8) {
-+				if (op >= dstend) {
-+					*dstlen = written;
-+					return -1;
-+				}
-+				*(op++) = putbuf >> 8;
-+				if ((putlen -= 8) >= 8) {
-+					if (op >= dstend) {
-+						*dstlen = written;
-+						return -1;
-+					}
-+					*(op++) = putbuf;
-+					written += 2;
-+					putlen -= 8;
-+					putbuf = i << (j - putlen); /**hot**/
-+				} else {
-+					putbuf <<= 8;
-+					written++;
-+				}
-+				*srclen = read;
-+			}
-+		}
-+		last_match_length = match_length;
-+		for (i = 0; (i < last_match_length) && (ip < srcend); i++) {
-+			c = *(ip++);
-+			DeleteNode(s);
-+			text_buf[s] = c;
-+			if (s < F - 1)
-+				text_buf[s + N] = c;
-+			s = (s + 1) & (N - 1);
-+			r = (r + 1) & (N - 1);
-+			InsertNode(r);
-+		}
-+		read += i;
-+		while (i++ < last_match_length) {
-+			DeleteNode(s);
-+			s = (s + 1) & (N - 1);
-+			r = (r + 1) & (N - 1);
-+			if (--len) InsertNode(r);
-+		}
-+	} while (len > 0);
-+	if (putlen) {
-+		if (op >= dstend) {
-+			*dstlen = written;
-+			return -1;
-+		}
-+		*(op++) = putbuf >> 8;
-+		written++;
-+		*srclen = read;
-+	}
-+	*dstlen = written;
-+	return 0;
-+}
-+
-+static int Decode(unsigned char *srcbuf, unsigned char *dstbuf, unsigned long srclen,
-+					unsigned long dstlen)	/* Just the reverse of Encode(). */
-+{
-+	unsigned long i, r, j, k, c;
-+	unsigned char *ip, *op;
-+	unsigned char *srcend = srcbuf + srclen;
-+	unsigned char *dstend = dstbuf + dstlen;
-+	unsigned short getbuf = 0;
-+	uchar getlen = 0;
-+	ip = srcbuf;
-+	op = dstbuf;
-+	StartHuff();
-+	for (i = 0; i < N - F; i++) text_buf[i] = ' ';
-+	r = N - F;
-+	while (op < dstend) {
-+		c = son[R];
-+		/* travel from root to leaf, */
-+		/* choosing the smaller child node (son[]) if the read bit is 0, */
-+		/* the bigger (son[]+1} if 1 */
-+		while (c < T) {
-+			while (getlen <= 8) {
-+				unsigned short t;
-+				t = (ip >= srcend) ? 0 : *(ip++);
-+				getbuf |= t << (8 - getlen);
-+				getlen += 8;
-+			}
-+			c += ((signed short)getbuf < 0);
-+			getbuf <<= 1;
-+			getlen--;
-+			c = son[c];
-+		}
-+		c -= T;
-+		update(c);
-+		if (c < 256) {
-+			if (op >= dstend) return -1;
-+			*(op++) = c;
-+			text_buf[r++] = c;
-+			r &= (N - 1);
-+		} else {
-+			j = c - 255 + THRESHOLD;
-+			while (getlen <= 8) {
-+				unsigned short t;
-+				t = (ip >= srcend) ? 0 : *(ip++);
-+				getbuf |= t << (8 - getlen);
-+				getlen += 8;
-+			}
-+			i = getbuf >> 8;
-+			getbuf <<= 8;
-+			getlen -= 8;
-+			c = d_code[i] << 6;
-+			k = d_len[i];
-+			/* read lower 6 bits verbatim */
-+			k -= 2;
-+			while (k--) {
-+				while (getlen <= 8) {
-+					unsigned short t;
-+					t = (ip >= srcend) ? 0 : *(ip++);
-+					getbuf |= t << (8 - getlen);
-+					getlen += 8;
-+				}
-+				i = (i << 1) + ((signed short)getbuf < 0);
-+				getbuf <<= 1;
-+				getlen--;
-+			}
-+			i = c | (i & 0x3F);
-+			i = r - i - 1;
-+			i &= (N - 1);
-+			for (k = 0; k < j; k++) {
-+				c = text_buf[(i + k) & (N - 1)];
-+				if (op >= dstend) return -1;
-+				*(op++) = c;
-+				text_buf[r++] = c;
-+				r &= (N - 1);
-+			}		
-+		}
-+	}
-+	return 0;
-+}
-+
-+/* interface to jffs2 bbc follows */
-+
-+#include "jffs2_bbc_framework.h"
-+
-+
-+#define JFFS2_BBC_LZHD_BLOCK_SIGN {0x3a, 0x98, 0xf7, 0xda}
-+
-+static int
-+jffs2_bbc_lzhd_compressor_init (void);
-+
-+static void
-+jffs2_bbc_lzhd_compressor_deinit (void);
-+
-+static int
-+jffs2_bbc_lzhd_compress (void *model, unsigned char *input,
-+			unsigned char *output, unsigned long *sourcelen,
-+			unsigned long *dstlen);
-+
-+static int
-+jffs2_bbc_lzhd_estimate (void *model, unsigned char *input,
-+			unsigned long sourcelen, unsigned long *dstlen,
-+			unsigned long *readtime, unsigned long *writetime);
-+
-+static int
-+jffs2_bbc_lzhd_decompress (void *model, unsigned char *input,
-+			  unsigned char *output, unsigned long sourcelen,
-+			  unsigned long dstlen);
-+
-+static char *
-+jffs2_bbc_lzhd_proc_info (void);
-+
-+static int
-+jffs2_bbc_lzhd_proc_command (char *command);
-+
-+struct jffs2_bbc_compressor_type jffs2_bbc_lzhd = {
-+	"lzhd",
-+	0,
-+	JFFS2_BBC_LZHD_BLOCK_SIGN,
-+	jffs2_bbc_lzhd_compressor_init,
-+	NULL,
-+	NULL,
-+	jffs2_bbc_lzhd_compressor_deinit,
-+	jffs2_bbc_lzhd_compress,
-+	jffs2_bbc_lzhd_estimate,
-+	jffs2_bbc_lzhd_decompress,
-+	jffs2_bbc_lzhd_proc_info,
-+	jffs2_bbc_lzhd_proc_command
-+};
-+
-+static int
-+jffs2_bbc_lzhd_compressor_init (void)
-+{
-+	return 0;
-+}
-+
-+static void
-+jffs2_bbc_lzhd_compressor_deinit (void)
-+{
-+}
-+
-+static int
-+jffs2_bbc_lzhd_compress (void *model, unsigned char *input,
-+			unsigned char *output, unsigned long *sourcelen,
-+			unsigned long *dstlen)
-+{
-+	int retval;
-+	unsigned long dst = *dstlen;
-+	*(output++) = jffs2_bbc_lzhd.block_sign[0];
-+	*(output++) = jffs2_bbc_lzhd.block_sign[1];
-+	dst -= 2;
-+	retval = Encode(input, output, sourcelen, &dst);
-+	dst += 2;
-+	*dstlen = dst;
-+	return retval;
-+}
-+
-+static int
-+jffs2_bbc_lzhd_estimate (void *model, unsigned char *input,
-+			unsigned long sourcelen, unsigned long *dstlen,
-+			unsigned long *readtime, unsigned long *writetime)
-+{
-+	*dstlen = sourcelen * 55 / 100;
-+	*readtime = JFFS2_BBC_ZLIB_READ_TIME * 8;
-+	*writetime = JFFS2_BBC_ZLIB_WRITE_TIME * 65 / 10;
-+	return 0;
-+}
-+
-+static int
-+jffs2_bbc_lzhd_decompress (void *model, unsigned char *input,
-+			  unsigned char *output, unsigned long sourcelen,
-+			  unsigned long dstlen)
-+{
-+	if (	( *(input++) != (unsigned char)jffs2_bbc_lzhd.block_sign[0] ) ||
-+			( *(input++) != (unsigned char)jffs2_bbc_lzhd.block_sign[1] )
-+	   ) {
-+		return -1;
-+	} else {
-+		return Decode(input, output, sourcelen - 2, dstlen);
-+	}
-+}
-+
-+static char *
-+jffs2_bbc_lzhd_proc_info (void)
-+{
-+	return "Lempel-Ziv-(dynamic) Huffman compression module";
-+}
-+
-+static int
-+jffs2_bbc_lzhd_proc_command (char *command)
-+{
-+	return 0;
-+}
-+
-+struct jffs2_bbc_compressor_type *
-+jffs2_bbc_lzhd_init (int mode)
-+{
-+	if (jffs2_bbc_register_compressor (&jffs2_bbc_lzhd) == 0)
-+	{
-+		return &jffs2_bbc_lzhd;
-+	}
-+	else
-+	{
-+		return NULL;
-+	}
-+}
-+
-+void
-+jffs2_bbc_lzhd_deinit (void)
-+{
-+	jffs2_bbc_unregister_compressor (&jffs2_bbc_lzhd);
-+}
-diff -Nur linux-mips-cvs/fs/jffs2/jffs2_bbc_lzo_comp.c linux-mips/fs/jffs2/jffs2_bbc_lzo_comp.c
---- linux-mips-cvs/fs/jffs2/jffs2_bbc_lzo_comp.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/jffs2_bbc_lzo_comp.c	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,2435 @@
-+/* -*- Mode: C; indent-tabs-mode: t; c-basic-offset: 4; tab-width: 4 -*- */
-+
-+/*
-+   jffs2_bbc_lzo_comp.c -- LZO1X-1 (and -999) compression module for jffs2
-+   Copyright (C) 2004 Patrik Kluba
-+   Based on the original LZO sources
-+   $Header: /openwrt/openwrt/package/linux/kernel-patches/301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*/
-+
-+/*
-+   Original copyright notice follows:
-+
-+   lzo1x_9x.c -- implementation of the LZO1X-999 compression algorithm
-+   lzo_ptr.h -- low-level pointer constructs
-+   lzo_swd.ch -- sliding window dictionary
-+   lzoconf.h -- configuration for the LZO real-time data compression library
-+   lzo_mchw.ch -- matching functions using a window
-+   minilzo.c -- mini subset of the LZO real-time data compression library
-+   config1x.h -- configuration for the LZO1X algorithm
-+   lzo1x.h -- public interface of the LZO1X compression algorithm
-+
-+   These files are part of the LZO real-time data compression library.
-+
-+   Copyright (C) 1996-2002 Markus Franz Xaver Johannes Oberhumer
-+   All Rights Reserved.
-+
-+   The LZO library is free software; you can redistribute it and/or
-+   modify it under the terms of the GNU General Public License as
-+   published by the Free Software Foundation; either version 2 of
-+   the License, or (at your option) any later version.
-+
-+   The LZO library is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+
-+   You should have received a copy of the GNU General Public License
-+   along with the LZO library; see the file COPYING.
-+   If not, write to the Free Software Foundation, Inc.,
-+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+
-+   Markus F.X.J. Oberhumer
-+   <markus@oberhumer.com>
-+*/
-+
-+/*
-+
-+	2004-02-16  pajko <pajko(AT)halom(DOT)u-szeged(DOT)hu>
-+				Initial release
-+					-removed all 16 bit code
-+					-all sensitive data will be on 4 byte boundary
-+					-removed check parts for library use
-+					-removed all but LZO1X-* compression
-+					
-+*/
-+
-+#ifndef __KERNEL__
-+  #include <sys/types.h>
-+  #include <stddef.h>
-+  #include <string.h>
-+  #include <limits.h>
-+#else
-+  #include <linux/kernel.h>
-+  #include <linux/types.h>
-+  #include <linux/stddef.h>
-+  #include <linux/string.h>
-+  #define USHRT_MAX     65535
-+  /* #define UINT_MAX      4294967295U */
-+#endif
-+
-+/* data type definitions */
-+#define U32 unsigned long
-+#define S32 signed long
-+#define I32 long
-+#define U16 unsigned short
-+#define S16 signed short
-+#define I16 short
-+#define U8 unsigned char
-+#define S8 signed char
-+#define I8 char
-+
-+/*************************************/
-+
-+/* lzo_swd.ch */
-+
-+#define SWD_N				N
-+#define SWD_F				F
-+#define SWD_THRESHOLD		THRESHOLD
-+
-+/* shortest unsigned int that 2 * SWD_F + SWD_N (currently 53248) fits in */
-+typedef unsigned short swd_uint;
-+/* upper limit of that data type */
-+#define SWD_UINT_MAX	USHRT_MAX
-+
-+/* minilzo.c */
-+
-+#define LZO_VERSION_DATE	"Jul 12 2002"
-+#define LZO_VERSION_STRING	"1.08"
-+#define LZO_VERSION			0x1080
-+
-+/* lzo_ptr.h */
-+
-+/* Integral types that have *exactly* the same number of bits as a lzo_voidp */
-+typedef unsigned long lzo_ptr_t;
-+typedef long lzo_sptr_t;
-+
-+
-+/*************************************/
-+
-+/* config1x.h */
-+
-+#define M1_MAX_OFFSET	0x0400
-+#define M2_MAX_OFFSET	0x0800
-+#define M3_MAX_OFFSET	0x4000
-+#define M4_MAX_OFFSET	0xbfff
-+
-+#define MX_MAX_OFFSET	(M1_MAX_OFFSET + M2_MAX_OFFSET)
-+
-+#define M1_MIN_LEN		2
-+#define M1_MAX_LEN		2
-+#define M2_MIN_LEN		3
-+#define M2_MAX_LEN		8
-+#define M3_MIN_LEN		3
-+#define M3_MAX_LEN		33
-+#define M4_MIN_LEN		3
-+#define M4_MAX_LEN		9
-+
-+#define M1_MARKER		0
-+#define M2_MARKER		64
-+#define M3_MARKER		32
-+#define M4_MARKER		16
-+
-+#define MIN_LOOKAHEAD		(M2_MAX_LEN + 1)
-+
-+/* minilzo.c */
-+
-+#define LZO_BYTE(x)       ((unsigned char) ((x) & 0xff))
-+
-+#define LZO_MAX(a,b)        ((a) >= (b) ? (a) : (b))
-+#define LZO_MIN(a,b)        ((a) <= (b) ? (a) : (b))
-+#define LZO_MAX3(a,b,c)     ((a) >= (b) ? LZO_MAX(a,c) : LZO_MAX(b,c))
-+#define LZO_MIN3(a,b,c)     ((a) <= (b) ? LZO_MIN(a,c) : LZO_MIN(b,c))
-+
-+#define lzo_sizeof(type)    ((lzo_uint) (sizeof(type)))
-+
-+#define LZO_HIGH(array)     ((lzo_uint) (sizeof(array)/sizeof(*(array))))
-+
-+#define LZO_SIZE(bits)      (1u << (bits))
-+#define LZO_MASK(bits)      (LZO_SIZE(bits) - 1)
-+
-+#define LZO_LSIZE(bits)     (1ul << (bits))
-+#define LZO_LMASK(bits)     (LZO_LSIZE(bits) - 1)
-+
-+#define LZO_USIZE(bits)     ((lzo_uint) 1 << (bits))
-+#define LZO_UMASK(bits)     (LZO_USIZE(bits) - 1)
-+
-+#define LZO_STYPE_MAX(b)    (((1l  << (8*(b)-2)) - 1l)  + (1l  << (8*(b)-2)))
-+#define LZO_UTYPE_MAX(b)    (((1ul << (8*(b)-1)) - 1ul) + (1ul << (8*(b)-1)))
-+
-+#define _LZO_STRINGIZE(x)           #x
-+#define _LZO_MEXPAND(x)             _LZO_STRINGIZE(x)
-+
-+#define _LZO_CONCAT2(a,b)           a ## b
-+#define _LZO_CONCAT3(a,b,c)         a ## b ## c
-+#define _LZO_CONCAT4(a,b,c,d)       a ## b ## c ## d
-+#define _LZO_CONCAT5(a,b,c,d,e)     a ## b ## c ## d ## e
-+
-+#define _LZO_ECONCAT2(a,b)          _LZO_CONCAT2(a,b)
-+#define _LZO_ECONCAT3(a,b,c)        _LZO_CONCAT3(a,b,c)
-+#define _LZO_ECONCAT4(a,b,c,d)      _LZO_CONCAT4(a,b,c,d)
-+#define _LZO_ECONCAT5(a,b,c,d,e)    _LZO_CONCAT5(a,b,c,d,e)
-+
-+#define lzo_dict_t    const lzo_bytep
-+#define lzo_dict_p    lzo_dict_t *
-+#define lzo_moff_t    lzo_uint
-+
-+#define MEMCPY8_DS(dest,src,len) \
-+    memcpy(dest,src,len); \
-+    dest += len; \
-+    src += len
-+
-+#define MEMCPY_DS(dest,src,len) \
-+    do *dest++ = *src++; \
-+    while (--len > 0)
-+
-+#define MEMMOVE_DS(dest,src,len) \
-+    do *dest++ = *src++; \
-+    while (--len > 0)
-+
-+#define BZERO8_PTR(s,l,n)   memset((s),0,(lzo_uint)(l)*(n))
-+
-+#define LZO_BASE 65521u
-+#define LZO_NMAX 5552
-+
-+#define LZO_DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
-+#define LZO_DO2(buf,i)  LZO_DO1(buf,i); LZO_DO1(buf,i+1);
-+#define LZO_DO4(buf,i)  LZO_DO2(buf,i); LZO_DO2(buf,i+2);
-+#define LZO_DO8(buf,i)  LZO_DO4(buf,i); LZO_DO4(buf,i+4);
-+#define LZO_DO16(buf,i) LZO_DO8(buf,i); LZO_DO8(buf,i+8);
-+
-+#define IS_SIGNED(type)       (((type) (-1)) < ((type) 0))
-+#define IS_UNSIGNED(type)     (((type) (-1)) > ((type) 0))
-+
-+#define IS_POWER_OF_2(x)        (((x) & ((x) - 1)) == 0)
-+
-+#define D_BITS          14
-+#define D_INDEX1(d,p)       d = DM((0x21*DX3(p,5,5,6)) >> 5)
-+#define D_INDEX2(d,p)       d = (d & (D_MASK & 0x7ff)) ^ (D_HIGH | 0x1f)
-+
-+#define LZO_HASH            LZO_HASH_LZO_INCREMENTAL_B
-+
-+#define DL_MIN_LEN          M2_MIN_LEN
-+
-+#define D_SIZE        LZO_SIZE(D_BITS)
-+#define D_MASK        LZO_MASK(D_BITS)
-+
-+#define D_HIGH        ((D_MASK >> 1) + 1)
-+
-+#define DINDEX1             D_INDEX1
-+#define DINDEX2             D_INDEX2
-+
-+#define DX2(p,s1,s2) \
-+	(((((lzo_uint32)((p)[2]) << (s2)) ^ (p)[1]) << (s1)) ^ (p)[0])
-+
-+#define DX3(p,s1,s2,s3) ((DX2((p)+1,s2,s3) << (s1)) ^ (p)[0])
-+#define DMS(v,s)        ((lzo_uint) (((v) & (D_MASK >> (s))) << (s)))
-+#define DM(v)           DMS(v,0)
-+
-+#define DENTRY(p,in)                          (p)
-+#define GINDEX(m_pos,m_off,dict,dindex,in)    m_pos = dict[dindex]
-+
-+#define LZO_CHECK_MPOS_DET(m_pos,m_off,in,ip,max_offset) \
-+	(m_pos == NULL || (m_off = (lzo_moff_t) (ip - m_pos)) > max_offset)
-+
-+#define LZO_CHECK_MPOS_NON_DET(m_pos,m_off,in,ip,max_offset) \
-+    (BOUNDS_CHECKING_OFF_IN_EXPR( \
-+	(PTR_LT(m_pos,in) || \
-+	 (m_off = (lzo_moff_t) PTR_DIFF(ip,m_pos)) <= 0 || \
-+	  m_off > max_offset) ))
-+
-+#define BOUNDS_CHECKING_OFF_IN_EXPR(expr)     (expr)
-+
-+#define DD_BITS			0
-+#define DD_SIZE         LZO_SIZE(DD_BITS)
-+#define DD_MASK         LZO_MASK(DD_BITS)
-+
-+#define DL_BITS        (D_BITS - DD_BITS)
-+#define DL_SIZE        LZO_SIZE(DL_BITS)
-+#define DL_MASK        LZO_MASK(DL_BITS)
-+
-+#define UPDATE_D(dict,drun,dv,p,in)       dict[ DINDEX(dv,p) ] = DENTRY(p,in)
-+#define UPDATE_I(dict,drun,index,p,in)    dict[index] = DENTRY(p,in)
-+#define UPDATE_P(ptr,drun,p,in)           (ptr)[0] = DENTRY(p,in)
-+
-+#define __COPY4(dst,src)  * (lzo_uint32p)(dst) = * (const lzo_uint32p)(src)
-+#define COPY4(dst,src)	__COPY4((lzo_ptr_t)(dst),(lzo_ptr_t)(src))
-+
-+#define TEST_IP         (ip < ip_end)
-+#define TEST_OP         (op <= op_end)
-+
-+#define NEED_IP(x) \
-+            if ((lzo_uint)(ip_end - ip) < (lzo_uint)(x))  goto input_overrun
-+#define NEED_OP(x) \
-+            if ((lzo_uint)(op_end - op) < (lzo_uint)(x))  goto output_overrun
-+#define TEST_LOOKBEHIND(m_pos,out)    if (m_pos < out) goto lookbehind_overrun
-+
-+/* lzo1x_9x.c */
-+
-+#define LZO_UINT_MAX	UINT_MAX
-+#define N			M4_MAX_OFFSET
-+#define THRESHOLD	    1
-+#define F		     2048
-+
-+#define SWD_BEST_OFF	(LZO_MAX3( M2_MAX_LEN, M3_MAX_LEN, M4_MAX_LEN ) + 1)
-+
-+/* ../include/lzoconf.h */
-+
-+typedef U32 lzo_uint32;
-+typedef I32 lzo_int32;
-+typedef U32 lzo_uint;
-+typedef I32 lzo_int;
-+typedef int lzo_bool;
-+
-+#define lzo_byte                U8
-+#define lzo_bytep               U8 *
-+#define lzo_charp               char *
-+#define lzo_voidp               void *
-+#define lzo_shortp              short *
-+#define lzo_ushortp             unsigned short *
-+#define lzo_uint32p             lzo_uint32 *
-+#define lzo_int32p              lzo_int32 *
-+#define lzo_uintp               lzo_uint *
-+#define lzo_intp                lzo_int *
-+#define lzo_voidpp              lzo_voidp *
-+#define lzo_bytepp              lzo_bytep *
-+#define lzo_sizeof_dict_t		sizeof(lzo_bytep)
-+
-+#define LZO_E_OK                    0
-+#define LZO_E_ERROR                 (-1)
-+#define LZO_E_OUT_OF_MEMORY         (-2)	/* not used right now */
-+#define LZO_E_NOT_COMPRESSIBLE      (-3)	/* not used right now */
-+#define LZO_E_INPUT_OVERRUN         (-4)
-+#define LZO_E_OUTPUT_OVERRUN        (-5)
-+#define LZO_E_LOOKBEHIND_OVERRUN    (-6)
-+#define LZO_E_EOF_NOT_FOUND         (-7)
-+#define LZO_E_INPUT_NOT_CONSUMED    (-8)
-+
-+#define LZO_PTR_ALIGN_UP(_ptr,_size) \
-+   ((_ptr) + (lzo_uint) __lzo_align_gap((const lzo_voidp)(_ptr),(lzo_uint)(_size)))
-+#define LZO_ALIGN(_ptr,_size) LZO_PTR_ALIGN_UP(_ptr,_size)
-+
-+typedef int
-+	(*lzo_compress_t) (const lzo_byte * src, lzo_uint src_len,
-+			   lzo_byte * dst, lzo_uintp dst_len,
-+			   lzo_voidp wrkmem);
-+
-+typedef int
-+	(*lzo_decompress_t) (const lzo_byte * src, lzo_uint src_len,
-+			     lzo_byte * dst, lzo_uintp dst_len,
-+			     lzo_voidp wrkmem);
-+
-+typedef int
-+	(*lzo_optimize_t) (lzo_byte * src, lzo_uint src_len,
-+			   lzo_byte * dst, lzo_uintp dst_len,
-+			   lzo_voidp wrkmem);
-+
-+typedef int
-+	(*lzo_compress_dict_t) (const lzo_byte * src, lzo_uint src_len,
-+				lzo_byte * dst, lzo_uintp dst_len,
-+				lzo_voidp wrkmem,
-+				const lzo_byte * dict, lzo_uint dict_len);
-+
-+typedef int
-+	(*lzo_decompress_dict_t) (const lzo_byte * src, lzo_uint src_len,
-+				  lzo_byte * dst, lzo_uintp dst_len,
-+				  lzo_voidp wrkmem,
-+				  const lzo_byte * dict, lzo_uint dict_len);
-+
-+typedef int
-+	(*lzo_compress_asm_t) (const lzo_byte * src, lzo_uint src_len,
-+			       lzo_byte * dst, lzo_uintp dst_len,
-+			       lzo_voidp wrkmem);
-+
-+typedef int
-+	(*lzo_decompress_asm_t) (const lzo_byte * src, lzo_uint src_len,
-+				 lzo_byte * dst, lzo_uintp dst_len,
-+				 lzo_voidp wrkmem);
-+
-+typedef void (*lzo_progress_callback_t) (lzo_uint, lzo_uint);
-+
-+typedef union
-+{
-+	lzo_bytep p;
-+	lzo_uint u;
-+} __lzo_pu_u;
-+typedef union
-+{
-+	lzo_bytep p;
-+	lzo_uint32 u32;
-+} __lzo_pu32_u;
-+typedef union
-+{
-+	void *vp;
-+	lzo_bytep bp;
-+	lzo_uint32 u32;
-+	long l;
-+} lzo_align_t;
-+
-+/* lzo1x.h */
-+
-+#define LZO1X_1_MEM_COMPRESS    ((lzo_uint32) (16384L * lzo_sizeof_dict_t))
-+#define LZO1X_999_MEM_COMPRESS  ((lzo_uint32) (14 * 16384L * sizeof(short)))
-+
-+/* lzo_ptr.h */
-+
-+#define PTR(a)				((lzo_ptr_t) (a))
-+#define PTR_LINEAR(a)		PTR(a)
-+#define PTR_ALIGNED_4(a)	((PTR_LINEAR(a) & 3) == 0)
-+#define PTR_ALIGNED_8(a)	((PTR_LINEAR(a) & 7) == 0)
-+#define PTR_ALIGNED2_4(a,b)	(((PTR_LINEAR(a) | PTR_LINEAR(b)) & 3) == 0)
-+#define PTR_ALIGNED2_8(a,b)	(((PTR_LINEAR(a) | PTR_LINEAR(b)) & 7) == 0)
-+#define PTR_LT(a,b)			(PTR(a) < PTR(b))
-+#define PTR_GE(a,b)			(PTR(a) >= PTR(b))
-+#define PTR_DIFF(a,b)		((lzo_ptrdiff_t) (PTR(a) - PTR(b)))
-+#define pd(a,b)		        ((lzo_uint) ((a)-(b)))
-+
-+typedef ptrdiff_t lzo_ptrdiff_t;
-+
-+typedef union
-+{
-+	char a_char;
-+	unsigned char a_uchar;
-+	short a_short;
-+	unsigned short a_ushort;
-+	int a_int;
-+	unsigned int a_uint;
-+	long a_long;
-+	unsigned long a_ulong;
-+	lzo_int a_lzo_int;
-+	lzo_uint a_lzo_uint;
-+	lzo_int32 a_lzo_int32;
-+	lzo_uint32 a_lzo_uint32;
-+	ptrdiff_t a_ptrdiff_t;
-+	lzo_ptrdiff_t a_lzo_ptrdiff_t;
-+	lzo_ptr_t a_lzo_ptr_t;
-+	lzo_voidp a_lzo_voidp;
-+	void *a_void_p;
-+	lzo_bytep a_lzo_bytep;
-+	lzo_bytepp a_lzo_bytepp;
-+	lzo_uintp a_lzo_uintp;
-+	lzo_uint *a_lzo_uint_p;
-+	lzo_uint32p a_lzo_uint32p;
-+	lzo_uint32 *a_lzo_uint32_p;
-+	unsigned char *a_uchar_p;
-+	char *a_char_p;
-+}
-+lzo_full_align_t;
-+
-+/* lzo_mchw.ch */
-+
-+typedef struct
-+{
-+	int init;
-+
-+	lzo_uint look;
-+
-+	lzo_uint m_len;
-+	lzo_uint m_off;
-+
-+	lzo_uint last_m_len;
-+	lzo_uint last_m_off;
-+
-+	const lzo_byte *bp;
-+	const lzo_byte *ip;
-+	const lzo_byte *in;
-+	const lzo_byte *in_end;
-+	lzo_byte *out;
-+
-+	lzo_progress_callback_t cb;
-+
-+	lzo_uint textsize;
-+	lzo_uint codesize;
-+	lzo_uint printcount;
-+
-+	unsigned long lit_bytes;
-+	unsigned long match_bytes;
-+	unsigned long rep_bytes;
-+	unsigned long lazy;
-+
-+	lzo_uint r1_lit;
-+	lzo_uint r1_m_len;
-+
-+	unsigned long m1a_m, m1b_m, m2_m, m3_m, m4_m;
-+	unsigned long lit1_r, lit2_r, lit3_r;
-+}
-+lzo1x_999_t;
-+
-+#define getbyte(c) 	((c).ip < (c).in_end ? *((c).ip)++ : (-1))
-+
-+/* lzo_swd.ch */
-+
-+#define SWD_UINT(x)			((swd_uint)(x))
-+#define SWD_HSIZE			16384
-+#define SWD_MAX_CHAIN		2048
-+#define HEAD3(b,p) \
-+	(((0x9f5f*(((((lzo_uint32)b[p]<<5)^b[p+1])<<5)^b[p+2]))>>5) & (SWD_HSIZE-1))
-+#define HEAD2(b,p)      (b[p] ^ ((unsigned)b[p+1]<<8))
-+#define NIL2				SWD_UINT_MAX
-+
-+typedef struct
-+{
-+	lzo_uint n;
-+	lzo_uint f;
-+	lzo_uint threshold;
-+
-+	lzo_uint max_chain;
-+	lzo_uint nice_length;
-+	lzo_bool use_best_off;
-+	lzo_uint lazy_insert;
-+
-+	lzo_uint m_len;
-+	lzo_uint m_off;
-+	lzo_uint look;
-+	int b_char;
-+
-+	lzo_uint best_off[SWD_BEST_OFF];
-+
-+	lzo1x_999_t *c;
-+	lzo_uint m_pos;
-+
-+	lzo_uint best_pos[SWD_BEST_OFF];
-+
-+	const lzo_byte *dict;
-+	const lzo_byte *dict_end;
-+	lzo_uint dict_len;
-+
-+	lzo_uint ip;
-+	lzo_uint bp;
-+	lzo_uint rp;
-+	lzo_uint b_size;
-+
-+	unsigned char *b_wrap;
-+
-+	lzo_uint node_count;
-+	lzo_uint first_rp;
-+
-+	unsigned char b[SWD_N + SWD_F + SWD_F];
-+	swd_uint head3[SWD_HSIZE];
-+	swd_uint succ3[SWD_N + SWD_F];
-+	swd_uint best3[SWD_N + SWD_F];
-+	swd_uint llen3[SWD_HSIZE];
-+
-+	swd_uint head2[65536L];
-+}
-+lzo1x_999_swd_t;
-+
-+#define s_head3(s,key)		s->head3[key]
-+#define swd_pos2off(s,pos) \
-+	(s->bp > (pos) ? s->bp - (pos) : s->b_size - ((pos) - s->bp))
-+
-+static __inline__ void
-+swd_getbyte (lzo1x_999_swd_t * s)
-+{
-+	int c;
-+
-+	if ((c = getbyte (*(s->c))) < 0)
-+	{
-+		if (s->look > 0)
-+			--s->look;
-+	}
-+	else
-+	{
-+		s->b[s->ip] = LZO_BYTE (c);
-+		if (s->ip < s->f)
-+			s->b_wrap[s->ip] = LZO_BYTE (c);
-+	}
-+	if (++s->ip == s->b_size)
-+		s->ip = 0;
-+	if (++s->bp == s->b_size)
-+		s->bp = 0;
-+	if (++s->rp == s->b_size)
-+		s->rp = 0;
-+}
-+
-+static void
-+swd_initdict (lzo1x_999_swd_t * s, const lzo_byte * dict, lzo_uint dict_len)
-+{
-+	s->dict = s->dict_end = NULL;
-+	s->dict_len = 0;
-+
-+	if (!dict || dict_len <= 0)
-+		return;
-+	if (dict_len > s->n)
-+	{
-+		dict += dict_len - s->n;
-+		dict_len = s->n;
-+	}
-+
-+	s->dict = dict;
-+	s->dict_len = dict_len;
-+	s->dict_end = dict + dict_len;
-+	memcpy (s->b, dict, dict_len);
-+	s->ip = dict_len;
-+}
-+
-+static void
-+swd_insertdict (lzo1x_999_swd_t * s, lzo_uint node, lzo_uint len)
-+{
-+	lzo_uint key;
-+
-+	s->node_count = s->n - len;
-+	s->first_rp = node;
-+
-+	while (len-- > 0)
-+	{
-+		key = HEAD3 (s->b, node);
-+		s->succ3[node] = s_head3 (s, key);
-+		s->head3[key] = SWD_UINT (node);
-+		s->best3[node] = SWD_UINT (s->f + 1);
-+		s->llen3[key]++;
-+
-+		key = HEAD2 (s->b, node);
-+		s->head2[key] = SWD_UINT (node);
-+
-+		node++;
-+	}
-+}
-+
-+static int
-+swd_init (lzo1x_999_swd_t * s, const lzo_byte * dict, lzo_uint dict_len)
-+{
-+
-+	s->n = SWD_N;
-+	s->f = SWD_F;
-+	s->threshold = SWD_THRESHOLD;
-+
-+
-+
-+	s->max_chain = SWD_MAX_CHAIN;
-+	s->nice_length = SWD_F;
-+	s->use_best_off = 0;
-+	s->lazy_insert = 0;
-+
-+	s->b_size = s->n + s->f;
-+	if (2 * s->f >= s->n || s->b_size + s->f >= NIL2)
-+		return LZO_E_ERROR;
-+	s->b_wrap = s->b + s->b_size;
-+	s->node_count = s->n;
-+
-+	memset (s->llen3, 0, sizeof (s->llen3[0]) * SWD_HSIZE);
-+	memset (s->head2, 0xff, sizeof (s->head2[0]) * 65536L);
-+
-+	s->ip = 0;
-+	swd_initdict (s, dict, dict_len);
-+	s->bp = s->ip;
-+	s->first_rp = s->ip;
-+
-+	s->look = (lzo_uint) (s->c->in_end - s->c->ip);
-+	if (s->look > 0)
-+	{
-+		if (s->look > s->f)
-+			s->look = s->f;
-+		memcpy (&s->b[s->ip], s->c->ip, s->look);
-+		s->c->ip += s->look;
-+		s->ip += s->look;
-+	}
-+
-+	if (s->ip == s->b_size)
-+		s->ip = 0;
-+
-+	if (s->look >= 2 && s->dict_len > 0)
-+		swd_insertdict (s, 0, s->dict_len);
-+
-+	s->rp = s->first_rp;
-+	if (s->rp >= s->node_count)
-+		s->rp -= s->node_count;
-+	else
-+		s->rp += s->b_size - s->node_count;
-+
-+	return LZO_E_OK;
-+}
-+
-+static __inline__ void
-+swd_remove_node (lzo1x_999_swd_t * s, lzo_uint node)
-+{
-+	if (s->node_count == 0)
-+	{
-+		lzo_uint key;
-+
-+		key = HEAD3 (s->b, node);
-+
-+		--s->llen3[key];
-+
-+		key = HEAD2 (s->b, node);
-+
-+		if ((lzo_uint) s->head2[key] == node)
-+			s->head2[key] = NIL2;
-+	}
-+	else
-+		--s->node_count;
-+}
-+
-+static void
-+swd_accept (lzo1x_999_swd_t * s, lzo_uint n)
-+{
-+
-+	while (n--)
-+	{
-+		lzo_uint key;
-+
-+		swd_remove_node (s, s->rp);
-+
-+		key = HEAD3 (s->b, s->bp);
-+		s->succ3[s->bp] = s_head3 (s, key);
-+		s->head3[key] = SWD_UINT (s->bp);
-+		s->best3[s->bp] = SWD_UINT (s->f + 1);
-+		s->llen3[key]++;
-+
-+		key = HEAD2 (s->b, s->bp);
-+		s->head2[key] = SWD_UINT (s->bp);;
-+
-+		swd_getbyte (s);
-+	}
-+}
-+
-+static void
-+swd_search (lzo1x_999_swd_t * s, lzo_uint node, lzo_uint cnt)
-+{
-+	const unsigned char *p1;
-+	const unsigned char *p2;
-+	const unsigned char *px;
-+
-+	lzo_uint m_len = s->m_len;
-+	const unsigned char *b = s->b;
-+	const unsigned char *bp = s->b + s->bp;
-+	const unsigned char *bx = s->b + s->bp + s->look;
-+	unsigned char scan_end1;
-+
-+	scan_end1 = bp[m_len - 1];
-+	for (; cnt-- > 0; node = s->succ3[node])
-+	{
-+		p1 = bp;
-+		p2 = b + node;
-+		px = bx;
-+
-+		if (p2[m_len - 1] == scan_end1 &&
-+		    p2[m_len] == p1[m_len] &&
-+		    p2[0] == p1[0] && p2[1] == p1[1])
-+		{
-+			lzo_uint i;
-+
-+			p1 += 2;
-+			p2 += 2;
-+			do
-+			{
-+			}
-+			while (++p1 < px && *p1 == *++p2);
-+
-+			i = p1 - bp;
-+
-+			if (i < SWD_BEST_OFF)
-+			{
-+				if (s->best_pos[i] == 0)
-+					s->best_pos[i] = node + 1;
-+			}
-+
-+			if (i > m_len)
-+			{
-+				s->m_len = m_len = i;
-+				s->m_pos = node;
-+				if (m_len == s->look)
-+					return;
-+				if (m_len >= s->nice_length)
-+					return;
-+				if (m_len > (lzo_uint) s->best3[node])
-+					return;
-+				scan_end1 = bp[m_len - 1];
-+			}
-+		}
-+	}
-+}
-+
-+static lzo_bool
-+swd_search2 (lzo1x_999_swd_t * s)
-+{
-+	lzo_uint key;
-+
-+	key = s->head2[HEAD2 (s->b, s->bp)];
-+	if (key == NIL2)
-+		return 0;
-+
-+	if (s->best_pos[2] == 0)
-+		s->best_pos[2] = key + 1;
-+
-+	if (s->m_len < 2)
-+	{
-+		s->m_len = 2;
-+		s->m_pos = key;
-+	}
-+	return 1;
-+}
-+
-+static void
-+swd_findbest (lzo1x_999_swd_t * s)
-+{
-+	lzo_uint key;
-+	lzo_uint cnt, node;
-+	lzo_uint len;
-+
-+	key = HEAD3 (s->b, s->bp);
-+	node = s->succ3[s->bp] = s_head3 (s, key);
-+	cnt = s->llen3[key]++;
-+
-+	if (cnt > s->max_chain && s->max_chain > 0)
-+		cnt = s->max_chain;
-+	s->head3[key] = SWD_UINT (s->bp);
-+
-+	s->b_char = s->b[s->bp];
-+	len = s->m_len;
-+	if (s->m_len >= s->look)
-+	{
-+		if (s->look == 0)
-+			s->b_char = -1;
-+		s->m_off = 0;
-+		s->best3[s->bp] = SWD_UINT (s->f + 1);
-+	}
-+	else
-+	{
-+
-+		if (swd_search2 (s))
-+
-+			if (s->look >= 3)
-+				swd_search (s, node, cnt);
-+		if (s->m_len > len)
-+			s->m_off = swd_pos2off (s, s->m_pos);
-+		s->best3[s->bp] = SWD_UINT (s->m_len);
-+
-+		if (s->use_best_off)
-+		{
-+			int i;
-+			for (i = 2; i < SWD_BEST_OFF; i++)
-+				if (s->best_pos[i] > 0)
-+					s->best_off[i] =
-+						swd_pos2off (s,
-+							     s->best_pos[i] -
-+							     1);
-+				else
-+					s->best_off[i] = 0;
-+		}
-+
-+	}
-+
-+	swd_remove_node (s, s->rp);
-+
-+	key = HEAD2 (s->b, s->bp);
-+	s->head2[key] = SWD_UINT (s->bp);
-+
-+}
-+
-+/* lzo_mchw.ch */
-+
-+static int
-+init_match (lzo1x_999_t * c, lzo1x_999_swd_t * s,
-+	    const lzo_byte * dict, lzo_uint dict_len, lzo_uint32 flags)
-+{
-+	int r;
-+
-+	c->init = 1;
-+
-+	s->c = c;
-+
-+	c->last_m_len = c->last_m_off = 0;
-+
-+	c->textsize = c->codesize = c->printcount = 0;
-+	c->lit_bytes = c->match_bytes = c->rep_bytes = 0;
-+	c->lazy = 0;
-+
-+	r = swd_init (s, dict, dict_len);
-+	if (r != 0)
-+		return r;
-+
-+	s->use_best_off = (flags & 1) ? 1 : 0;
-+	return r;
-+}
-+
-+static int
-+find_match (lzo1x_999_t * c, lzo1x_999_swd_t * s,
-+	    lzo_uint this_len, lzo_uint skip)
-+{
-+	if (skip > 0)
-+	{
-+		swd_accept (s, this_len - skip);
-+		c->textsize += this_len - skip + 1;
-+	}
-+	else
-+	{
-+		c->textsize += this_len - skip;
-+	}
-+
-+	s->m_len = 1;
-+	s->m_len = 1;
-+
-+	if (s->use_best_off)
-+		memset (s->best_pos, 0, sizeof (s->best_pos));
-+
-+	swd_findbest (s);
-+	c->m_len = s->m_len;
-+	c->m_off = s->m_off;
-+
-+	swd_getbyte (s);
-+
-+	if (s->b_char < 0)
-+	{
-+		c->look = 0;
-+		c->m_len = 0;
-+	}
-+	else
-+	{
-+		c->look = s->look + 1;
-+	}
-+	c->bp = c->ip - c->look;
-+
-+	if (c->cb && c->textsize > c->printcount)
-+	{
-+		(*c->cb) (c->textsize, c->codesize);
-+		c->printcount += 1024;
-+	}
-+
-+	return LZO_E_OK;
-+}
-+
-+/* lzo1x_9x.c */
-+
-+static lzo_byte *
-+code_match (lzo1x_999_t * c, lzo_byte * op, lzo_uint m_len, lzo_uint m_off)
-+{
-+	lzo_uint x_len = m_len;
-+	lzo_uint x_off = m_off;
-+
-+	c->match_bytes += m_len;
-+
-+	if (m_len == 2)
-+	{
-+		m_off -= 1;
-+
-+		*op++ = LZO_BYTE (M1_MARKER | ((m_off & 3) << 2));
-+		*op++ = LZO_BYTE (m_off >> 2);
-+
-+		c->m1a_m++;
-+	}
-+
-+	else if (m_len <= M2_MAX_LEN && m_off <= M2_MAX_OFFSET)
-+
-+	{
-+
-+		m_off -= 1;
-+		*op++ = LZO_BYTE (((m_len - 1) << 5) | ((m_off & 7) << 2));
-+		*op++ = LZO_BYTE (m_off >> 3);
-+		c->m2_m++;
-+	}
-+	else if (m_len == M2_MIN_LEN && m_off <= MX_MAX_OFFSET
-+		 && c->r1_lit >= 4)
-+	{
-+		m_off -= 1 + M2_MAX_OFFSET;
-+
-+		*op++ = LZO_BYTE (M1_MARKER | ((m_off & 3) << 2));
-+		*op++ = LZO_BYTE (m_off >> 2);
-+
-+		c->m1b_m++;
-+	}
-+	else if (m_off <= M3_MAX_OFFSET)
-+	{
-+		m_off -= 1;
-+		if (m_len <= M3_MAX_LEN)
-+			*op++ = LZO_BYTE (M3_MARKER | (m_len - 2));
-+		else
-+		{
-+			m_len -= M3_MAX_LEN;
-+			*op++ = M3_MARKER | 0;
-+			while (m_len > 255)
-+			{
-+				m_len -= 255;
-+				*op++ = 0;
-+			}
-+			*op++ = LZO_BYTE (m_len);
-+		}
-+
-+		*op++ = LZO_BYTE (m_off << 2);
-+		*op++ = LZO_BYTE (m_off >> 6);
-+
-+		c->m3_m++;
-+	}
-+	else
-+	{
-+		lzo_uint k;
-+
-+		m_off -= 0x4000;
-+		k = (m_off & 0x4000) >> 11;
-+		if (m_len <= M4_MAX_LEN)
-+			*op++ = LZO_BYTE (M4_MARKER | k | (m_len - 2));
-+		else
-+		{
-+			m_len -= M4_MAX_LEN;
-+			*op++ = LZO_BYTE (M4_MARKER | k | 0);
-+			while (m_len > 255)
-+			{
-+				m_len -= 255;
-+				*op++ = 0;
-+			}
-+			*op++ = LZO_BYTE (m_len);
-+		}
-+
-+		*op++ = LZO_BYTE (m_off << 2);
-+		*op++ = LZO_BYTE (m_off >> 6);
-+
-+		c->m4_m++;
-+	}
-+
-+	c->last_m_len = x_len;
-+	c->last_m_off = x_off;
-+	return op;
-+}
-+
-+static lzo_byte *
-+STORE_RUN (lzo1x_999_t * c, lzo_byte * op, const lzo_byte * ii, lzo_uint t)
-+{
-+	c->lit_bytes += t;
-+
-+	if (op == c->out && t <= 238)
-+	{
-+		*op++ = LZO_BYTE (17 + t);
-+	}
-+	else if (t <= 3)
-+	{
-+		op[-2] |= LZO_BYTE (t);
-+
-+		c->lit1_r++;
-+	}
-+	else if (t <= 18)
-+	{
-+		*op++ = LZO_BYTE (t - 3);
-+		c->lit2_r++;
-+	}
-+	else
-+	{
-+		lzo_uint tt = t - 18;
-+
-+		*op++ = 0;
-+		while (tt > 255)
-+		{
-+			tt -= 255;
-+			*op++ = 0;
-+		}
-+		*op++ = LZO_BYTE (tt);
-+		c->lit3_r++;
-+	}
-+	do
-+		*op++ = *ii++;
-+	while (--t > 0);
-+
-+	return op;
-+}
-+
-+static lzo_byte *
-+code_run (lzo1x_999_t * c, lzo_byte * op, const lzo_byte * ii,
-+	  lzo_uint lit, lzo_uint m_len)
-+{
-+	if (lit > 0)
-+	{
-+		op = STORE_RUN (c, op, ii, lit);
-+		c->r1_m_len = m_len;
-+		c->r1_lit = lit;
-+	}
-+	else
-+	{
-+		c->r1_m_len = 0;
-+		c->r1_lit = 0;
-+	}
-+
-+	return op;
-+}
-+
-+static int
-+len_of_coded_match (lzo_uint m_len, lzo_uint m_off, lzo_uint lit)
-+{
-+	int n = 4;
-+
-+	if (m_len < 2)
-+		return -1;
-+	if (m_len == 2)
-+		return (m_off <= M1_MAX_OFFSET && lit > 0
-+			&& lit < 4) ? 2 : -1;
-+	if (m_len <= M2_MAX_LEN && m_off <= M2_MAX_OFFSET)
-+		return 2;
-+	if (m_len == M2_MIN_LEN && m_off <= MX_MAX_OFFSET && lit >= 4)
-+		return 2;
-+	if (m_off <= M3_MAX_OFFSET)
-+	{
-+		if (m_len <= M3_MAX_LEN)
-+			return 3;
-+		m_len -= M3_MAX_LEN;
-+		while (m_len > 255)
-+		{
-+			m_len -= 255;
-+			n++;
-+		}
-+		return n;
-+	}
-+	if (m_off <= M4_MAX_OFFSET)
-+	{
-+		if (m_len <= M4_MAX_LEN)
-+			return 3;
-+		m_len -= M4_MAX_LEN;
-+		while (m_len > 255)
-+		{
-+			m_len -= 255;
-+			n++;
-+		}
-+		return n;
-+	}
-+	return -1;
-+}
-+
-+static lzo_int
-+min_gain (lzo_uint ahead, lzo_uint lit1, lzo_uint lit2, int l1, int l2,
-+	  int l3)
-+{
-+	lzo_int lazy_match_min_gain = 0;
-+
-+	lazy_match_min_gain += ahead;
-+
-+	if (lit1 <= 3)
-+		lazy_match_min_gain += (lit2 <= 3) ? 0 : 2;
-+	else if (lit1 <= 18)
-+		lazy_match_min_gain += (lit2 <= 18) ? 0 : 1;
-+
-+	lazy_match_min_gain += (l2 - l1) * 2;
-+	if (l3 > 0)
-+		lazy_match_min_gain -= (ahead - l3) * 2;
-+
-+	if (lazy_match_min_gain < 0)
-+		lazy_match_min_gain = 0;
-+
-+	return lazy_match_min_gain;
-+}
-+
-+static void
-+better_match (const lzo1x_999_swd_t * swd, lzo_uint * m_len, lzo_uint * m_off)
-+{
-+	if (*m_len <= M2_MIN_LEN)
-+		return;
-+
-+	if (*m_off <= M2_MAX_OFFSET)
-+		return;
-+
-+	if (*m_off > M2_MAX_OFFSET &&
-+	    *m_len >= M2_MIN_LEN + 1 && *m_len <= M2_MAX_LEN + 1 &&
-+	    swd->best_off[*m_len - 1]
-+	    && swd->best_off[*m_len - 1] <= M2_MAX_OFFSET)
-+	{
-+		*m_len = *m_len - 1;
-+		*m_off = swd->best_off[*m_len];
-+		return;
-+	}
-+
-+	if (*m_off > M3_MAX_OFFSET &&
-+	    *m_len >= M4_MAX_LEN + 1 && *m_len <= M2_MAX_LEN + 2 &&
-+	    swd->best_off[*m_len - 2]
-+	    && swd->best_off[*m_len - 2] <= M2_MAX_OFFSET)
-+	{
-+		*m_len = *m_len - 2;
-+		*m_off = swd->best_off[*m_len];
-+		return;
-+	}
-+
-+	if (*m_off > M3_MAX_OFFSET &&
-+	    *m_len >= M4_MAX_LEN + 1 && *m_len <= M3_MAX_LEN + 1 &&
-+	    swd->best_off[*m_len - 1]
-+	    && swd->best_off[*m_len - 1] <= M3_MAX_OFFSET)
-+	{
-+		*m_len = *m_len - 1;
-+		*m_off = swd->best_off[*m_len];
-+	}
-+
-+}
-+
-+/* minilzo.c */
-+
-+static lzo_bool
-+lzo_assert (int expr)
-+{
-+	return (expr) ? 1 : 0;
-+}
-+
-+/* lzo1x_9x.c */
-+
-+static int
-+lzo1x_999_compress_internal (const lzo_byte * in, lzo_uint in_len,
-+			     lzo_byte * out, lzo_uintp out_len,
-+			     lzo_voidp wrkmem,
-+			     const lzo_byte * dict, lzo_uint dict_len,
-+			     lzo_progress_callback_t cb,
-+			     int try_lazy,
-+			     lzo_uint good_length,
-+			     lzo_uint max_lazy,
-+			     lzo_uint nice_length,
-+			     lzo_uint max_chain, lzo_uint32 flags)
-+{
-+	lzo_byte *op;
-+	const lzo_byte *ii;
-+	lzo_uint lit;
-+	lzo_uint m_len, m_off;
-+	lzo1x_999_t cc;
-+	lzo1x_999_t *const c = &cc;
-+	lzo1x_999_swd_t *const swd = (lzo1x_999_swd_t *) wrkmem;
-+	int r;
-+
-+	if (!lzo_assert
-+	    (LZO1X_999_MEM_COMPRESS >= lzo_sizeof (lzo1x_999_swd_t)))
-+		return LZO_E_ERROR;
-+
-+	if (try_lazy < 0)
-+		try_lazy = 1;
-+
-+	if (good_length <= 0)
-+		good_length = 32;
-+
-+	if (max_lazy <= 0)
-+		max_lazy = 32;
-+
-+	if (nice_length <= 0)
-+		nice_length = 0;
-+
-+	if (max_chain <= 0)
-+		max_chain = SWD_MAX_CHAIN;
-+
-+	c->init = 0;
-+	c->ip = c->in = in;
-+	c->in_end = in + in_len;
-+	c->out = out;
-+	c->cb = cb;
-+	c->m1a_m = c->m1b_m = c->m2_m = c->m3_m = c->m4_m = 0;
-+	c->lit1_r = c->lit2_r = c->lit3_r = 0;
-+
-+	op = out;
-+	ii = c->ip;
-+	lit = 0;
-+	c->r1_lit = c->r1_m_len = 0;
-+
-+	r = init_match (c, swd, dict, dict_len, flags);
-+	if (r != 0)
-+		return r;
-+	if (max_chain > 0)
-+		swd->max_chain = max_chain;
-+	if (nice_length > 0)
-+		swd->nice_length = nice_length;
-+
-+	r = find_match (c, swd, 0, 0);
-+	if (r != 0)
-+		return r;
-+	while (c->look > 0)
-+	{
-+		lzo_uint ahead;
-+		lzo_uint max_ahead;
-+		int l1, l2, l3;
-+
-+		c->codesize = op - out;
-+
-+		m_len = c->m_len;
-+		m_off = c->m_off;
-+
-+		if (lit == 0)
-+			ii = c->bp;
-+
-+		if (m_len < 2 ||
-+		    (m_len == 2
-+		     && (m_off > M1_MAX_OFFSET || lit == 0 || lit >= 4))
-+		    || (m_len == 2 && op == out) || (op == out && lit == 0))
-+		{
-+
-+			m_len = 0;
-+		}
-+		else if (m_len == M2_MIN_LEN)
-+		{
-+
-+			if (m_off > MX_MAX_OFFSET && lit >= 4)
-+				m_len = 0;
-+		}
-+
-+		if (m_len == 0)
-+		{
-+
-+			lit++;
-+			swd->max_chain = max_chain;
-+			r = find_match (c, swd, 1, 0);
-+			continue;
-+		}
-+
-+		if (swd->use_best_off)
-+			better_match (swd, &m_len, &m_off);
-+
-+		ahead = 0;
-+		if (try_lazy <= 0 || m_len >= max_lazy)
-+		{
-+
-+			l1 = 0;
-+			max_ahead = 0;
-+		}
-+		else
-+		{
-+
-+			l1 = len_of_coded_match (m_len, m_off, lit);
-+
-+			max_ahead = LZO_MIN (try_lazy, l1 - 1);
-+
-+		}
-+
-+		while (ahead < max_ahead && c->look > m_len)
-+		{
-+			lzo_int lazy_match_min_gain;
-+
-+			if (m_len >= good_length)
-+				swd->max_chain = max_chain >> 2;
-+			else
-+				swd->max_chain = max_chain;
-+			r = find_match (c, swd, 1, 0);
-+			ahead++;
-+
-+			if (c->m_len < m_len)
-+				continue;
-+
-+			if (c->m_len == m_len && c->m_off >= m_off)
-+				continue;
-+
-+			if (swd->use_best_off)
-+				better_match (swd, &c->m_len, &c->m_off);
-+
-+			l2 = len_of_coded_match (c->m_len, c->m_off,
-+						 lit + ahead);
-+			if (l2 < 0)
-+				continue;
-+
-+			l3 = (op == out) ? -1 : len_of_coded_match (ahead,
-+								    m_off,
-+								    lit);
-+
-+			lazy_match_min_gain =
-+				min_gain (ahead, lit, lit + ahead, l1, l2,
-+					  l3);
-+			if (c->m_len >= m_len + lazy_match_min_gain)
-+			{
-+				c->lazy++;
-+
-+				if (l3 > 0)
-+				{
-+
-+					op = code_run (c, op, ii, lit, ahead);
-+					lit = 0;
-+
-+					op = code_match (c, op, ahead, m_off);
-+				}
-+				else
-+				{
-+					lit += ahead;
-+				}
-+				goto lazy_match_done;
-+			}
-+		}
-+
-+		op = code_run (c, op, ii, lit, m_len);
-+		lit = 0;
-+
-+		op = code_match (c, op, m_len, m_off);
-+		swd->max_chain = max_chain;
-+		r = find_match (c, swd, m_len, 1 + ahead);
-+
-+	      lazy_match_done:;
-+	}
-+
-+	if (lit > 0)
-+		op = STORE_RUN (c, op, ii, lit);
-+
-+	*op++ = M4_MARKER | 1;
-+	*op++ = 0;
-+	*op++ = 0;
-+
-+	c->codesize = op - out;
-+
-+	*out_len = op - out;
-+
-+	if (c->cb)
-+		(*c->cb) (c->textsize, c->codesize);
-+
-+	return LZO_E_OK;
-+}
-+
-+static int
-+lzo1x_999_compress_level (const lzo_byte * in, lzo_uint in_len,
-+			  lzo_byte * out, lzo_uintp out_len,
-+			  lzo_voidp wrkmem,
-+			  const lzo_byte * dict, lzo_uint dict_len,
-+			  lzo_progress_callback_t cb, int compression_level)
-+{
-+	static const struct
-+	{
-+		int try_lazy;
-+		lzo_uint good_length;
-+		lzo_uint max_lazy;
-+		lzo_uint nice_length;
-+		lzo_uint max_chain;
-+		lzo_uint32 flags;
-+	} c[9] =
-+	{
-+		{
-+		0, 0, 0, 8, 4, 0},
-+		{
-+		0, 0, 0, 16, 8, 0},
-+		{
-+		0, 0, 0, 32, 16, 0},
-+		{
-+		1, 4, 4, 16, 16, 0},
-+		{
-+		1, 8, 16, 32, 32, 0},
-+		{
-+		1, 8, 16, 128, 128, 0},
-+		{
-+		2, 8, 32, 128, 256, 0},
-+		{
-+		2, 32, 128, F, 2048, 1},
-+		{
-+		2, F, F, F, 4096, 1}
-+	};
-+
-+	if (compression_level < 1 || compression_level > 9)
-+		return LZO_E_ERROR;
-+
-+	compression_level -= 1;
-+	return lzo1x_999_compress_internal (in, in_len, out, out_len, wrkmem,
-+					    dict, dict_len, cb,
-+					    c[compression_level].try_lazy,
-+					    c[compression_level].good_length,
-+					    c[compression_level].max_lazy,
-+					    0,
-+					    c[compression_level].max_chain,
-+					    c[compression_level].flags);
-+}
-+
-+static int
-+lzo1x_999_compress (const lzo_byte * in, lzo_uint in_len,
-+		    lzo_byte * out, lzo_uintp out_len, lzo_voidp wrkmem)
-+{
-+	return lzo1x_999_compress_level (in, in_len, out, out_len, wrkmem,
-+					 NULL, 0, 0, 8);
-+}
-+
-+/* minilzo.c */
-+
-+static const lzo_byte __lzo_copyright[] = LZO_VERSION_STRING;
-+
-+static lzo_uint
-+_lzo1x_1_do_compress (const lzo_byte * in, lzo_uint in_len,
-+		      lzo_byte * out, lzo_uintp out_len, lzo_voidp wrkmem)
-+{
-+
-+	register const lzo_byte *ip;
-+
-+	lzo_byte *op;
-+	const lzo_byte *const in_end = in + in_len;
-+	const lzo_byte *const ip_end = in + in_len - 8 - 5;
-+	const lzo_byte *ii;
-+	lzo_dict_p const dict = (lzo_dict_p) wrkmem;
-+
-+	op = out;
-+	ip = in;
-+	ii = ip;
-+
-+	ip += 4;
-+	for (;;)
-+	{
-+		register const lzo_byte *m_pos;
-+
-+		lzo_uint m_off;
-+		lzo_uint m_len;
-+		lzo_uint dindex;
-+
-+		DINDEX1 (dindex, ip);
-+		GINDEX (m_pos, m_off, dict, dindex, in);
-+		if (LZO_CHECK_MPOS_NON_DET
-+		    (m_pos, m_off, in, ip, M4_MAX_OFFSET))
-+			goto literal;
-+
-+		if (m_off <= M2_MAX_OFFSET || m_pos[3] == ip[3])
-+			goto try_match;
-+		DINDEX2 (dindex, ip);
-+		GINDEX (m_pos, m_off, dict, dindex, in);
-+
-+		if (LZO_CHECK_MPOS_NON_DET
-+		    (m_pos, m_off, in, ip, M4_MAX_OFFSET))
-+			goto literal;
-+		if (m_off <= M2_MAX_OFFSET || m_pos[3] == ip[3])
-+			goto try_match;
-+		goto literal;
-+
-+	      try_match:
-+		if (m_pos[0] != ip[0] || m_pos[1] != ip[1])
-+		{
-+		}
-+		else
-+		{
-+			if (m_pos[2] == ip[2])
-+			{
-+				goto match;
-+			}
-+			else
-+			{
-+			}
-+		}
-+
-+	      literal:
-+		UPDATE_I (dict, 0, dindex, ip, in);
-+		++ip;
-+		if (ip >= ip_end)
-+			break;
-+		continue;
-+
-+	      match:
-+		UPDATE_I (dict, 0, dindex, ip, in);
-+
-+		if (pd (ip, ii) > 0)
-+		{
-+			register lzo_uint t = pd (ip, ii);
-+
-+			if (t <= 3)
-+			{
-+				op[-2] |= LZO_BYTE (t);
-+			}
-+			else if (t <= 18)
-+				*op++ = LZO_BYTE (t - 3);
-+			else
-+			{
-+				register lzo_uint tt = t - 18;
-+
-+				*op++ = 0;
-+				while (tt > 255)
-+				{
-+					tt -= 255;
-+					*op++ = 0;
-+				}
-+				*op++ = LZO_BYTE (tt);;
-+			}
-+			do
-+				*op++ = *ii++;
-+			while (--t > 0);
-+		}
-+
-+		ip += 3;
-+		if (m_pos[3] != *ip++ || m_pos[4] != *ip++
-+		    || m_pos[5] != *ip++ || m_pos[6] != *ip++
-+		    || m_pos[7] != *ip++ || m_pos[8] != *ip++)
-+		{
-+			--ip;
-+			m_len = ip - ii;
-+
-+			if (m_off <= M2_MAX_OFFSET)
-+			{
-+				m_off -= 1;
-+
-+				*op++ = LZO_BYTE (((m_len -
-+						    1) << 5) | ((m_off & 7) <<
-+								2));
-+				*op++ = LZO_BYTE (m_off >> 3);
-+			}
-+			else if (m_off <= M3_MAX_OFFSET)
-+			{
-+				m_off -= 1;
-+				*op++ = LZO_BYTE (M3_MARKER | (m_len - 2));
-+				goto m3_m4_offset;
-+			}
-+			else
-+
-+			{
-+				m_off -= 0x4000;
-+
-+				*op++ = LZO_BYTE (M4_MARKER |
-+						  ((m_off & 0x4000) >> 11) |
-+						  (m_len - 2));
-+				goto m3_m4_offset;
-+			}
-+		}
-+		else
-+		{
-+			{
-+				const lzo_byte *end = in_end;
-+				const lzo_byte *m = m_pos + M2_MAX_LEN + 1;
-+				while (ip < end && *m == *ip)
-+					m++, ip++;
-+				m_len = (ip - ii);
-+			}
-+
-+
-+			if (m_off <= M3_MAX_OFFSET)
-+			{
-+				m_off -= 1;
-+				if (m_len <= 33)
-+					*op++ = LZO_BYTE (M3_MARKER |
-+							  (m_len - 2));
-+				else
-+				{
-+					m_len -= 33;
-+					*op++ = M3_MARKER | 0;
-+					goto m3_m4_len;
-+				}
-+			}
-+			else
-+			{
-+				m_off -= 0x4000;
-+
-+				if (m_len <= M4_MAX_LEN)
-+					*op++ = LZO_BYTE (M4_MARKER |
-+							  ((m_off & 0x4000) >>
-+							   11) | (m_len - 2));
-+
-+				else
-+				{
-+					m_len -= M4_MAX_LEN;
-+					*op++ = LZO_BYTE (M4_MARKER |
-+							  ((m_off & 0x4000) >>
-+							   11));
-+				      m3_m4_len:
-+					while (m_len > 255)
-+					{
-+						m_len -= 255;
-+						*op++ = 0;
-+					}
-+
-+					*op++ = LZO_BYTE (m_len);
-+				}
-+			}
-+
-+		      m3_m4_offset:
-+			*op++ = LZO_BYTE ((m_off & 63) << 2);
-+			*op++ = LZO_BYTE (m_off >> 6);
-+		}
-+		ii = ip;
-+		if (ip >= ip_end)
-+			break;
-+	}
-+
-+	*out_len = op - out;
-+	return pd (in_end, ii);
-+}
-+
-+static int
-+lzo1x_1_compress (const lzo_byte * in, lzo_uint in_len,
-+		  lzo_byte * out, lzo_uintp out_len, lzo_voidp wrkmem)
-+{
-+	lzo_byte *op = out;
-+	lzo_uint t;
-+
-+	if (in_len <= M2_MAX_LEN + 5)
-+		t = in_len;
-+	else
-+	{
-+		t = _lzo1x_1_do_compress (in, in_len, op, out_len, wrkmem);
-+		op += *out_len;
-+	}
-+
-+	if (t > 0)
-+	{
-+		const lzo_byte *ii = in + in_len - t;
-+
-+		if (op == out && t <= 238)
-+			*op++ = LZO_BYTE (17 + t);
-+		else if (t <= 3)
-+			op[-2] |= LZO_BYTE (t);
-+		else if (t <= 18)
-+			*op++ = LZO_BYTE (t - 3);
-+		else
-+		{
-+			lzo_uint tt = t - 18;
-+
-+			*op++ = 0;
-+			while (tt > 255)
-+			{
-+				tt -= 255;
-+				*op++ = 0;
-+			}
-+
-+			*op++ = LZO_BYTE (tt);
-+		}
-+		do
-+			*op++ = *ii++;
-+		while (--t > 0);
-+	}
-+
-+	*op++ = M4_MARKER | 1;
-+	*op++ = 0;
-+	*op++ = 0;
-+
-+	*out_len = op - out;
-+	return 0;
-+}
-+
-+static int
-+lzo1x_decompress (const lzo_byte * in, lzo_uint in_len,
-+		  lzo_byte * out, lzo_uintp out_len, lzo_voidp wrkmem)
-+{
-+	register lzo_byte *op;
-+	register const lzo_byte *ip;
-+	register lzo_uint t;
-+
-+	register const lzo_byte *m_pos;
-+
-+	const lzo_byte *const ip_end = in + in_len;
-+	lzo_byte *const op_end = out + *out_len;
-+
-+	*out_len = 0;
-+
-+	op = out;
-+	ip = in;
-+
-+	if (*ip > 17)
-+	{
-+		t = *ip++ - 17;
-+		if (t < 4)
-+			goto match_next;
-+		NEED_OP (t);
-+		NEED_IP (t + 1);
-+		do
-+			*op++ = *ip++;
-+		while (--t > 0);
-+		goto first_literal_run;
-+	}
-+
-+	while (TEST_IP && TEST_OP)
-+	{
-+		t = *ip++;
-+		if (t >= 16)
-+			goto match;
-+		if (t == 0)
-+		{
-+			NEED_IP (1);
-+			while (*ip == 0)
-+			{
-+				t += 255;
-+				ip++;
-+				NEED_IP (1);
-+			}
-+			t += 15 + *ip++;
-+		}
-+		NEED_OP (t + 3);
-+		NEED_IP (t + 4);
-+		if (PTR_ALIGNED2_4 (op, ip))
-+		{
-+			COPY4 (op, ip);
-+
-+			op += 4;
-+			ip += 4;
-+			if (--t > 0)
-+			{
-+				if (t >= 4)
-+				{
-+					do
-+					{
-+						COPY4 (op, ip);
-+						op += 4;
-+						ip += 4;
-+						t -= 4;
-+					}
-+					while (t >= 4);
-+					if (t > 0)
-+						do
-+							*op++ = *ip++;
-+						while (--t > 0);
-+				}
-+				else
-+					do
-+						*op++ = *ip++;
-+					while (--t > 0);
-+			}
-+		}
-+		else
-+		{
-+			*op++ = *ip++;
-+			*op++ = *ip++;
-+			*op++ = *ip++;
-+			do
-+				*op++ = *ip++;
-+			while (--t > 0);
-+		}
-+	      first_literal_run:
-+
-+		t = *ip++;
-+		if (t >= 16)
-+			goto match;
-+
-+		m_pos = op - (1 + M2_MAX_OFFSET);
-+		m_pos -= t >> 2;
-+		m_pos -= *ip++ << 2;
-+		TEST_LOOKBEHIND (m_pos, out);
-+		NEED_OP (3);
-+		*op++ = *m_pos++;
-+		*op++ = *m_pos++;
-+		*op++ = *m_pos;
-+
-+		goto match_done;
-+
-+		while (TEST_IP && TEST_OP)
-+		{
-+		      match:
-+			if (t >= 64)
-+			{
-+				m_pos = op - 1;
-+				m_pos -= (t >> 2) & 7;
-+				m_pos -= *ip++ << 3;
-+				t = (t >> 5) - 1;
-+				TEST_LOOKBEHIND (m_pos, out);
-+				NEED_OP (t + 3 - 1);
-+				goto copy_match;
-+
-+			}
-+			else if (t >= 32)
-+			{
-+				t &= 31;
-+				if (t == 0)
-+				{
-+					NEED_IP (1);
-+					while (*ip == 0)
-+					{
-+						t += 255;
-+						ip++;
-+						NEED_IP (1);
-+					}
-+					t += 31 + *ip++;
-+				}
-+
-+				m_pos = op - 1;
-+				m_pos -= (ip[0] >> 2) + (ip[1] << 6);
-+
-+				ip += 2;
-+			}
-+			else if (t >= 16)
-+			{
-+				m_pos = op;
-+				m_pos -= (t & 8) << 11;
-+
-+				t &= 7;
-+				if (t == 0)
-+				{
-+					NEED_IP (1);
-+					while (*ip == 0)
-+					{
-+						t += 255;
-+						ip++;
-+						NEED_IP (1);
-+					}
-+					t += 7 + *ip++;
-+				}
-+
-+				m_pos -= (ip[0] >> 2) + (ip[1] << 6);
-+
-+				ip += 2;
-+				if (m_pos == op)
-+					goto eof_found;
-+				m_pos -= 0x4000;
-+			}
-+			else
-+			{
-+
-+				m_pos = op - 1;
-+				m_pos -= t >> 2;
-+				m_pos -= *ip++ << 2;
-+				TEST_LOOKBEHIND (m_pos, out);
-+				NEED_OP (2);
-+				*op++ = *m_pos++;
-+				*op++ = *m_pos;
-+
-+				goto match_done;
-+			}
-+
-+			TEST_LOOKBEHIND (m_pos, out);
-+			NEED_OP (t + 3 - 1);
-+			if (t >= 2 * 4 - (3 - 1)
-+			    && PTR_ALIGNED2_4 (op, m_pos))
-+			{
-+				COPY4 (op, m_pos);
-+				op += 4;
-+				m_pos += 4;
-+				t -= 4 - (3 - 1);
-+				do
-+				{
-+					COPY4 (op, m_pos);
-+					op += 4;
-+					m_pos += 4;
-+					t -= 4;
-+				}
-+				while (t >= 4);
-+				if (t > 0)
-+					do
-+						*op++ = *m_pos++;
-+					while (--t > 0);
-+			}
-+			else
-+
-+			{
-+			      copy_match:
-+				*op++ = *m_pos++;
-+				*op++ = *m_pos++;
-+				do
-+					*op++ = *m_pos++;
-+				while (--t > 0);
-+			}
-+
-+		      match_done:
-+			t = ip[-2] & 3;
-+
-+			if (t == 0)
-+				break;
-+
-+		      match_next:
-+			NEED_OP (t);
-+			NEED_IP (t + 1);
-+			do
-+				*op++ = *ip++;
-+			while (--t > 0);
-+			t = *ip++;
-+		}
-+	}
-+	*out_len = op - out;
-+	return LZO_E_EOF_NOT_FOUND;
-+
-+      eof_found:
-+	*out_len = op - out;
-+	return (ip == ip_end ? LZO_E_OK :
-+		(ip <
-+		 ip_end ? LZO_E_INPUT_NOT_CONSUMED : LZO_E_INPUT_OVERRUN));
-+
-+      input_overrun:
-+	*out_len = op - out;
-+	return LZO_E_INPUT_OVERRUN;
-+
-+      output_overrun:
-+	*out_len = op - out;
-+	return LZO_E_OUTPUT_OVERRUN;
-+
-+      lookbehind_overrun:
-+	*out_len = op - out;
-+	return LZO_E_LOOKBEHIND_OVERRUN;
-+}
-+
-+/* lzo1x_oo.ch */
-+
-+#define NO_LIT          LZO_UINT_MAX
-+
-+static void
-+copy2 (lzo_byte * ip, const lzo_byte * m_pos, lzo_ptrdiff_t off)
-+{
-+	ip[0] = m_pos[0];
-+	if (off == 1)
-+		ip[1] = m_pos[0];
-+	else
-+		ip[1] = m_pos[1];
-+}
-+
-+static void
-+copy3 (lzo_byte * ip, const lzo_byte * m_pos, lzo_ptrdiff_t off)
-+{
-+	ip[0] = m_pos[0];
-+	if (off == 1)
-+	{
-+		ip[2] = ip[1] = m_pos[0];
-+	}
-+	else if (off == 2)
-+	{
-+		ip[1] = m_pos[1];
-+		ip[2] = m_pos[0];
-+	}
-+	else
-+	{
-+		ip[1] = m_pos[1];
-+		ip[2] = m_pos[2];
-+	}
-+}
-+
-+static int
-+lzo1x_optimize (lzo_byte * in, lzo_uint in_len,
-+		lzo_byte * out, lzo_uintp out_len, lzo_voidp wrkmem)
-+{
-+	register lzo_byte *op;
-+	register lzo_byte *ip;
-+	register lzo_uint t;
-+	register lzo_byte *m_pos;
-+	lzo_uint nl;
-+	const lzo_byte *const ip_end = in + in_len;
-+	const lzo_byte *const op_end = out + *out_len;
-+	lzo_byte *litp = NULL;
-+	lzo_uint lit = 0;
-+	lzo_uint next_lit = NO_LIT;
-+	long o_m1_a = 0, o_m1_b = 0, o_m2 = 0, o_m3_a = 0, o_m3_b = 0;
-+
-+	*out_len = 0;
-+
-+	op = out;
-+	ip = in;
-+
-+	if (*ip > 17)
-+	{
-+		t = *ip++ - 17;
-+		if (t < 4)
-+			goto match_next;
-+		goto first_literal_run;
-+	}
-+
-+	while (TEST_IP && TEST_OP)
-+	{
-+		t = *ip++;
-+		if (t >= 16)
-+			goto match;
-+		litp = ip - 1;
-+		if (t == 0)
-+		{
-+			t = 15;
-+			while (*ip == 0)
-+				t += 255, ip++;
-+			t += *ip++;
-+		}
-+		lit = t + 3;
-+	      copy_literal_run:
-+		*op++ = *ip++;
-+		*op++ = *ip++;
-+		*op++ = *ip++;
-+	      first_literal_run:
-+		do
-+			*op++ = *ip++;
-+		while (--t > 0);
-+
-+		t = *ip++;
-+
-+		if (t >= 16)
-+			goto match;
-+		m_pos = op - 1 - 0x800;
-+		m_pos -= t >> 2;
-+		m_pos -= *ip++ << 2;
-+		*op++ = *m_pos++;
-+		*op++ = *m_pos++;
-+		*op++ = *m_pos++;
-+		lit = 0;
-+		goto match_done;
-+
-+		while (TEST_IP && TEST_OP)
-+		{
-+			if (t < 16)
-+			{
-+				m_pos = op - 1;
-+				m_pos -= t >> 2;
-+				m_pos -= *ip++ << 2;
-+
-+				if (litp == NULL)
-+					goto copy_m1;
-+
-+				nl = ip[-2] & 3;
-+				if (nl == 0 && lit == 1 && ip[0] >= 16)
-+				{
-+					next_lit = nl;
-+					lit += 2;
-+					*litp = LZO_BYTE ((*litp & ~3) | lit);
-+					copy2 (ip - 2, m_pos, op - m_pos);
-+					o_m1_a++;
-+				}
-+				else if (nl == 0 && ip[0] < 16 && ip[0] != 0
-+					 && (lit + 2 + ip[0] < 16))
-+				{
-+					t = *ip++;
-+					*litp &= ~3;
-+					copy2 (ip - 3 + 1, m_pos, op - m_pos);
-+					litp += 2;
-+					if (lit > 0)
-+						memmove (litp + 1, litp, lit);
-+					lit += 2 + t + 3;
-+					*litp = LZO_BYTE (lit - 3);
-+
-+					o_m1_b++;
-+					*op++ = *m_pos++;
-+					*op++ = *m_pos++;
-+					goto copy_literal_run;
-+				}
-+			      copy_m1:
-+				*op++ = *m_pos++;
-+				*op++ = *m_pos++;
-+			}
-+			else
-+			{
-+			      match:
-+				if (t >= 64)
-+				{
-+					m_pos = op - 1;
-+					m_pos -= (t >> 2) & 7;
-+					m_pos -= *ip++ << 3;
-+					t = (t >> 5) - 1;
-+					if (litp == NULL)
-+						goto copy_m;
-+
-+					nl = ip[-2] & 3;
-+					if (t == 1 && lit > 3 && nl == 0 &&
-+					    ip[0] < 16 && ip[0] != 0
-+					    && (lit + 3 + ip[0] < 16))
-+					{
-+						t = *ip++;
-+						copy3 (ip - 1 - 2, m_pos,
-+						       op - m_pos);
-+						lit += 3 + t + 3;
-+						*litp = LZO_BYTE (lit - 3);
-+						o_m2++;
-+						*op++ = *m_pos++;
-+						*op++ = *m_pos++;
-+						*op++ = *m_pos++;
-+						goto copy_literal_run;
-+					}
-+				}
-+				else
-+				{
-+					if (t >= 32)
-+					{
-+						t &= 31;
-+						if (t == 0)
-+						{
-+							t = 31;
-+							while (*ip == 0)
-+								t += 255,
-+									ip++;
-+							t += *ip++;
-+						}
-+						m_pos = op - 1;
-+						m_pos -= *ip++ >> 2;
-+						m_pos -= *ip++ << 6;
-+					}
-+					else
-+					{
-+						m_pos = op;
-+						m_pos -= (t & 8) << 11;
-+						t &= 7;
-+						if (t == 0)
-+						{
-+							t = 7;
-+							while (*ip == 0)
-+								t += 255,
-+									ip++;
-+							t += *ip++;
-+						}
-+						m_pos -= *ip++ >> 2;
-+						m_pos -= *ip++ << 6;
-+						if (m_pos == op)
-+							goto eof_found;
-+						m_pos -= 0x4000;
-+					}
-+					if (litp == NULL)
-+						goto copy_m;
-+
-+					nl = ip[-2] & 3;
-+					if (t == 1 && lit == 0 && nl == 0
-+					    && ip[0] >= 16)
-+					{
-+						next_lit = nl;
-+						lit += 3;
-+						*litp = LZO_BYTE ((*litp & ~3)
-+								  | lit);
-+						copy3 (ip - 3, m_pos,
-+						       op - m_pos);
-+						o_m3_a++;
-+					}
-+					else if (t == 1 && lit <= 3 && nl == 0
-+						 && ip[0] < 16 && ip[0] != 0
-+						 && (lit + 3 + ip[0] < 16))
-+					{
-+						t = *ip++;
-+						*litp &= ~3;
-+						copy3 (ip - 4 + 1, m_pos,
-+						       op - m_pos);
-+						litp += 2;
-+						if (lit > 0)
-+							memmove (litp + 1,
-+								 litp, lit);
-+						lit += 3 + t + 3;
-+						*litp = LZO_BYTE (lit - 3);
-+
-+						o_m3_b++;
-+						*op++ = *m_pos++;
-+						*op++ = *m_pos++;
-+						*op++ = *m_pos++;
-+						goto copy_literal_run;
-+					}
-+				}
-+			      copy_m:
-+				*op++ = *m_pos++;
-+				*op++ = *m_pos++;
-+				do
-+					*op++ = *m_pos++;
-+				while (--t > 0);
-+			}
-+
-+		      match_done:
-+			if (next_lit == NO_LIT)
-+			{
-+				t = ip[-2] & 3;
-+				lit = t;
-+				litp = ip - 2;
-+			}
-+			else
-+				t = next_lit;
-+			next_lit = NO_LIT;
-+			if (t == 0)
-+				break;
-+		      match_next:
-+			do
-+				*op++ = *ip++;
-+			while (--t > 0);
-+			t = *ip++;
-+		}
-+	}
-+
-+	*out_len = op - out;
-+	return LZO_E_EOF_NOT_FOUND;
-+
-+      eof_found:
-+	*out_len = op - out;
-+	return (ip == ip_end ? LZO_E_OK :
-+		(ip <
-+		 ip_end ? LZO_E_INPUT_NOT_CONSUMED : LZO_E_INPUT_OVERRUN));
-+}
-+
-+/* interface to jffs2 bbc follows */
-+
-+#include "jffs2_bbc_framework.h"
-+
-+#define BLOCKSIZE		4096
-+#define OUTBLOCKSIZE	(BLOCKSIZE + BLOCKSIZE / 64 + 16 + 3)
-+
-+#define JFFS2_BBC_LZO_BLOCK_SIGN {0x3f, 0x47, 0x5a, 0x18}
-+
-+static int
-+jffs2_bbc_lzo_compressor_init (void);
-+
-+static void
-+jffs2_bbc_lzo_compressor_deinit (void);
-+
-+static int
-+jffs2_bbc_lzo_compress (void *model, unsigned char *input,
-+			unsigned char *output, unsigned long *sourcelen,
-+			unsigned long *dstlen);
-+
-+static int
-+jffs2_bbc_lzo_estimate (void *model, unsigned char *input,
-+			unsigned long sourcelen, unsigned long *dstlen,
-+			unsigned long *readtime, unsigned long *writetime);
-+
-+static int
-+jffs2_bbc_lzo_decompress (void *model, unsigned char *input,
-+			  unsigned char *output, unsigned long sourcelen,
-+			  unsigned long dstlen);
-+
-+static char *
-+jffs2_bbc_lzo_proc_info (void);
-+
-+static int
-+jffs2_bbc_lzo_proc_command (char *command);
-+
-+struct jffs2_bbc_compressor_type jffs2_bbc_lzo = {
-+	"lzo",
-+	0,
-+	JFFS2_BBC_LZO_BLOCK_SIGN,
-+	jffs2_bbc_lzo_compressor_init,
-+	NULL,
-+	NULL,
-+	jffs2_bbc_lzo_compressor_deinit,
-+	jffs2_bbc_lzo_compress,
-+	jffs2_bbc_lzo_estimate,
-+	jffs2_bbc_lzo_decompress,
-+	jffs2_bbc_lzo_proc_info,
-+	jffs2_bbc_lzo_proc_command
-+};
-+
-+static int
-+no_lzo1x_optimize (lzo_byte * src, lzo_uint src_len,
-+		   lzo_byte * dst, lzo_uintp dst_len, lzo_voidp wrkmem)
-+{
-+	return 0;
-+}
-+
-+#ifdef __KERNEL__
-+static lzo_compress_t lzo1x_compressor = lzo1x_1_compress;
-+static lzo_optimize_t lzo1x_optimizer = no_lzo1x_optimize;
-+static int lzo1x_compressor_type = 1;
-+static int lzo1x_optimize_type = 0;
-+static unsigned long lzo1x_compressor_memsize = LZO1X_1_MEM_COMPRESS;
-+#else
-+static lzo_compress_t lzo1x_compressor = lzo1x_999_compress;
-+static lzo_optimize_t lzo1x_optimizer = lzo1x_optimize;
-+static int lzo1x_compressor_type = 999;
-+static int lzo1x_optimize_type = 1;
-+static unsigned long lzo1x_compressor_memsize = LZO1X_999_MEM_COMPRESS;
-+#endif
-+
-+static lzo_bytep wrkmem = NULL;	/* temporary buffer for compression, used by lzo */
-+static lzo_bytep cmprssmem = NULL;	/* temporary buffer for compression, used by interface */
-+
-+static int
-+jffs2_bbc_lzo_compressor_init (void)
-+{
-+	wrkmem = (lzo_bytep) jffs2_bbc_malloc (lzo1x_compressor_memsize);
-+	cmprssmem = (lzo_bytep) jffs2_bbc_malloc (OUTBLOCKSIZE);
-+	return !(wrkmem && cmprssmem);
-+}
-+
-+static void
-+jffs2_bbc_lzo_compressor_deinit (void)
-+{
-+	jffs2_bbc_free (wrkmem);
-+	jffs2_bbc_free (cmprssmem);
-+}
-+
-+static int
-+jffs2_bbc_lzo_compress (void *model, unsigned char *input,
-+			unsigned char *output, unsigned long *sourcelen,
-+			unsigned long *dstlen)
-+{
-+	lzo_uint csize = OUTBLOCKSIZE;
-+	lzo_uint isize = *sourcelen;
-+	int retval;
-+	if ((retval =
-+	     lzo1x_compressor (input, *sourcelen, cmprssmem, &csize,
-+			       wrkmem)) != LZO_E_OK)
-+	{
-+		*sourcelen = *dstlen = 0;
-+		return retval;
-+	}
-+	else
-+	{
-+		retval = lzo1x_optimizer (cmprssmem, csize, input, &isize,
-+					  NULL);
-+		csize += 2;
-+		if (csize <= *dstlen) {
-+			*dstlen = csize;
-+			*(output++) = jffs2_bbc_lzo.block_sign[0];
-+			*(output++) = jffs2_bbc_lzo.block_sign[1];
-+			memcpy (output, cmprssmem, csize - 2);
-+			return retval;
-+		} else {
-+			*sourcelen = *dstlen = 0;
-+			return -1;
-+		}
-+	}
-+}
-+
-+static int
-+jffs2_bbc_lzo_estimate (void *model, unsigned char *input,
-+			unsigned long sourcelen, unsigned long *dstlen,
-+			unsigned long *readtime, unsigned long *writetime)
-+{
-+	*dstlen = sourcelen * 55 / 100;
-+	*readtime = JFFS2_BBC_ZLIB_READ_TIME / 2;
-+	*writetime = JFFS2_BBC_ZLIB_WRITE_TIME * 8 / 10; /* LZO1X-1 is much-much faster,
-+	but LZO1X-999 is slow. The default mode for inside kernel compression is LZO1X-1
-+	This should be *0.4 really */
-+	return 0;
-+}
-+
-+static int
-+jffs2_bbc_lzo_decompress (void *model, unsigned char *input,
-+			  unsigned char *output, unsigned long sourcelen,
-+			  unsigned long dstlen)
-+{
-+	lzo_uint outlen = dstlen;
-+	if (	( *(input++) != (unsigned char)jffs2_bbc_lzo.block_sign[0] ) ||
-+			( *(input++) != (unsigned char)jffs2_bbc_lzo.block_sign[1] )
-+	   ) {
-+		return -1;
-+	} else {
-+		return lzo1x_decompress (input, sourcelen - 2, output, &outlen, NULL);
-+	}
-+}
-+
-+static char *
-+jffs2_bbc_lzo_proc_info (void)
-+{
-+	if (lzo1x_compressor_type == 1)
-+	{
-+		if (lzo1x_optimize_type == 1)
-+		{
-+			return "LZO1X-1 compression with optimization";
-+		}
-+		else
-+		{
-+			return "LZO1X-1 compression without optimization";
-+		}
-+	}
-+	else if (lzo1x_compressor_type == 999)
-+	{
-+		if (lzo1x_optimize_type == 1)
-+		{
-+			return "LZO1X-999 compression with optimization";
-+		}
-+		else
-+		{
-+			return "LZO1X-999 compression without optimization";
-+		}
-+	}
-+	else
-+	{
-+		return "Unknown configuration!";
-+	}
-+}
-+
-+static int
-+jffs2_bbc_lzo_proc_command (char *command)
-+{
-+	switch (*command)
-+	{
-+	case 'o':
-+		/* switch optimization off */
-+		lzo1x_optimizer = no_lzo1x_optimize;
-+		lzo1x_optimize_type = 0;
-+		jffs2_bbc_print1 ("Compression optimization switched off.\n");
-+		return 0;
-+	case 'O':
-+		/* switch optimization on */
-+		lzo1x_optimizer = lzo1x_optimize;
-+		lzo1x_optimize_type = 1;
-+		jffs2_bbc_print1 ("Compression optimization switched on.\n");
-+		return 0;
-+	case '1':
-+		/* switch compression to LZO1X-1 */
-+		jffs2_bbc_free (wrkmem);
-+		lzo1x_compressor_type = 1;
-+		lzo1x_compressor = lzo1x_1_compress;
-+		lzo1x_compressor_memsize = LZO1X_1_MEM_COMPRESS;
-+		wrkmem = (lzo_bytep)
-+			jffs2_bbc_malloc (lzo1x_compressor_memsize);
-+		jffs2_bbc_print1 ("Compression type switched to LZO1X-1.\n");
-+		return 0;
-+	case '9':
-+		/* switch compression to LZO1X-999 */
-+		jffs2_bbc_free (wrkmem);
-+		lzo1x_compressor_type = 999;
-+		lzo1x_compressor = lzo1x_999_compress;
-+		lzo1x_compressor_memsize = LZO1X_999_MEM_COMPRESS;
-+		wrkmem = (lzo_bytep)
-+			jffs2_bbc_malloc (lzo1x_compressor_memsize);
-+		jffs2_bbc_print1
-+			("Compression type switched to LZO1X-999.\n");
-+		return 0;
-+	default:
-+		jffs2_bbc_print1 ("Unknown command!\n");
-+		return 0;
-+	}
-+}
-+
-+
-+struct jffs2_bbc_compressor_type *
-+jffs2_bbc_lzo_init (int mode)
-+{
-+	if (jffs2_bbc_register_compressor (&jffs2_bbc_lzo) == 0)
-+	{
-+		return &jffs2_bbc_lzo;
-+	}
-+	else
-+	{
-+		return NULL;
-+	}
-+}
-+
-+void
-+jffs2_bbc_lzo_deinit (void)
-+{
-+	jffs2_bbc_unregister_compressor (&jffs2_bbc_lzo);
-+}
-diff -Nur linux-mips-cvs/fs/jffs2/jffs2_bbc_lzss_comp.c linux-mips/fs/jffs2/jffs2_bbc_lzss_comp.c
---- linux-mips-cvs/fs/jffs2/jffs2_bbc_lzss_comp.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/jffs2_bbc_lzss_comp.c	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,385 @@
-+/* -*- Mode: C; indent-tabs-mode: t; c-basic-offset: 4; tab-width: 4 -*- */
-+
-+/*
-+   jffs2_bbc_lzss_comp.c -- Lempel-Ziv-Storer-Szymanski compression module for jffs2
-+   Copyright (C) 2004 Patrik Kluba
-+   Based on the LZSS source included in LDS (lossless datacompression sources)
-+   Block-compression modifications by Patrik Kluba
-+   $Header: /openwrt/openwrt/package/linux/kernel-patches/301-jffs-compression,v 1.1 2005/03/26 10:33:31 wbx Exp $
-+*/
-+
-+/*
-+Original copyright follows:
-+
-+**************************************************************
-+	LZSS.C -- A Data Compression Program
-+**************************************************************
-+    4/6/1989 Haruhiko Okumura
-+	Use, distribute, and modify this program freely.
-+	Please send me your improved versions.
-+		PC-VAN		SCIENCE
-+		NIFTY-Serve	PAF01022
-+		CompuServe	74050,1022
-+**************************************************************
-+
-+*/
-+
-+/*
-+
-+	2004-02-16  pajko <pajko(AT)halom(DOT)u-szeged(DOT)hu>
-+				Initial release
-+					
-+*/
-+
-+/* lzss.c */
-+
-+#define N		 4096	/* size of ring buffer */
-+#define F		   18	/* upper limit for match_length */
-+#define THRESHOLD	2   /* encode string into position and length
-+						   if match_length is greater than this */
-+#define NIL			N	/* index for root of binary search trees */
-+
-+static unsigned char
-+		text_buf[N + F - 1];	/* ring buffer of size N,
-+			with extra F-1 bytes to facilitate string comparison */
-+static unsigned long		match_position, match_length;  /* of longest match.  These are
-+			set by the InsertNode() procedure. */
-+static unsigned long		lson[N + 1], rson[N + 257], dad[N + 1];  /* left & right children &
-+			parents -- These constitute binary search trees. */
-+
-+static void InitTree(void)  /* initialize trees */
-+{
-+	unsigned long  i;
-+
-+	/* For i = 0 to N - 1, rson[i] and lson[i] will be the right and
-+	   left children of node i.  These nodes need not be initialized.
-+	   Also, dad[i] is the parent of node i.  These are initialized to
-+	   NIL (= N), which stands for 'not used.'
-+	   For i = 0 to 255, rson[N + i + 1] is the root of the tree
-+	   for strings that begin with character i.  These are initialized
-+	   to NIL.  Note there are 256 trees. */
-+
-+	for (i = N + 1; i <= N + 256; i++) rson[i] = NIL;
-+	for (i = 0; i < N; i++) dad[i] = NIL;
-+}
-+
-+static void InsertNode(unsigned long r)
-+	/* Inserts string of length F, text_buf[r..r+F-1], into one of the
-+	   trees (text_buf[r]'th tree) and returns the longest-match position
-+	   and length via the global variables match_position and match_length.
-+	   If match_length = F, then removes the old node in favor of the new
-+	   one, because the old one will be deleted sooner.
-+	   Note r plays double role, as tree node and position in buffer. */
-+{
-+	unsigned long  i, p;
-+	unsigned char  *key;
-+	signed long cmp;
-+	
-+	cmp = 1;  key = &text_buf[r];  p = N + 1 + key[0];
-+	rson[r] = lson[r] = NIL;  match_length = 0;
-+	for ( ; ; ) {
-+		if (cmp >= 0) {
-+			if (rson[p] != NIL) p = rson[p];
-+			else {  rson[p] = r;  dad[r] = p;  return;  }
-+		} else {
-+			if (lson[p] != NIL) p = lson[p];
-+			else {  lson[p] = r;  dad[r] = p;  return;  }
-+		}
-+		for (i = 1; i < F; i++)
-+			if ((cmp = key[i] - text_buf[p + i]) != 0)  break;
-+		if (i > match_length) {
-+			match_position = p;
-+			if ((match_length = i) >= F)  break;
-+		}
-+	}
-+	dad[r] = dad[p];  lson[r] = lson[p];  rson[r] = rson[p];
-+	dad[lson[p]] = r;  dad[rson[p]] = r;
-+	if (rson[dad[p]] == p) rson[dad[p]] = r;
-+	else                   lson[dad[p]] = r;
-+	dad[p] = NIL;  /* remove p */
-+}
-+
-+static void DeleteNode(unsigned long p)  /* deletes node p from tree */
-+{
-+	unsigned long  q;
-+	
-+	if (dad[p] == NIL) return;  /* not in tree */
-+	if (rson[p] == NIL) q = lson[p];
-+	else if (lson[p] == NIL) q = rson[p];
-+	else {
-+		q = lson[p];
-+		if (rson[q] != NIL) {
-+			do {  q = rson[q];  } while (rson[q] != NIL);
-+			rson[dad[q]] = lson[q];  dad[lson[q]] = dad[q];
-+			lson[q] = lson[p];  dad[lson[p]] = q;
-+		}
-+		rson[q] = rson[p];  dad[rson[p]] = q;
-+	}
-+	dad[q] = dad[p];
-+	if (rson[dad[p]] == p) rson[dad[p]] = q;  else lson[dad[p]] = q;
-+	dad[p] = NIL;
-+}
-+
-+/* modified for block compression */
-+/* on return, srclen will contain the number of successfully compressed bytes
-+   and dstlen will contain completed compressed bytes */
-+
-+static int Encode(unsigned char *srcbuf, unsigned char *dstbuf, unsigned long *srclen,
-+			unsigned long *dstlen)
-+{
-+	unsigned long i, len, r, c, s, last_match_length, code_buf_ptr;
-+	unsigned char code_buf[17], mask;
-+	unsigned char *ip, *op;
-+	unsigned long written = 0;
-+	unsigned long read = 0;
-+	unsigned char *srcend = srcbuf + *srclen;
-+	unsigned char *dstend = dstbuf + *dstlen;
-+	ip = srcbuf;
-+	op = dstbuf;
-+	InitTree();  /* initialize trees */
-+	code_buf[0] = 0;  /* code_buf[1..16] saves eight units of code, and
-+		code_buf[0] works as eight flags, "1" representing that the unit
-+		is an unencoded letter (1 byte), "0" a position-and-length pair
-+		(2 bytes).  Thus, eight units require at most 16 bytes of code. */
-+	code_buf_ptr = mask = 1;
-+	s = 0;  r = N - F;
-+	for (i = s; i < r; i++) text_buf[i] = ' ';  /* Clear the buffer with
-+		any character that will appear often. */
-+	for (len = 0; (len < F) && (ip < srcend); len++)
-+		text_buf[r + len] = *(ip++);  /* Read F bytes into the last F bytes of
-+			the buffer */
-+	read = len;
-+	for (i = 1; i <= F; i++) InsertNode(r - i);  /* Insert the F strings,
-+		each of which begins with one or more 'space' characters.  Note
-+		the order in which these strings are inserted.  This way,
-+		degenerate trees will be less likely to occur. */
-+	InsertNode(r);  /* Finally, insert the whole string just read.  The
-+		global variables match_length and match_position are set. */
-+	do {
-+		if (match_length > len) match_length = len;  /* match_length
-+			may be spuriously long near the end of text. */
-+		if (match_length <= THRESHOLD) {
-+			match_length = 1;  /* Not long enough match.  Send one byte. */
-+			code_buf[0] |= mask;  /* 'send one byte' flag */
-+			code_buf[code_buf_ptr++] = text_buf[r];  /* Send uncoded. */
-+		} else {
-+			code_buf[code_buf_ptr++] = match_position;
-+			code_buf[code_buf_ptr++] = (((match_position >> 4) & 0xf0)
-+			  | (match_length - (THRESHOLD + 1)));  /* Send position and
-+					length pair. Note match_length > THRESHOLD. */
-+		}
-+		if ((mask <<= 1) == 0) {  /* Shift mask left one bit. */
-+			if ((op + code_buf_ptr) > dstend) {
-+				*dstlen = written; /* written contains bytes of complete compressed
-+				                 code */
-+				return -1;
-+			};
-+			for (i = 0; i < code_buf_ptr; *(op++) = code_buf[i++]);  /* Send at most 8 units of */
-+				     /* code together */
-+			written += code_buf_ptr;
-+			*srclen = read; /* this many bytes have been successfully compressed */
-+			code_buf[0] = 0;  code_buf_ptr = mask = 1;
-+		}
-+		last_match_length = match_length;
-+		for (i = 0; (i < last_match_length) && (ip < srcend); i++) {
-+			c = *(ip++);
-+			DeleteNode(s);		/* Delete old strings and */
-+			text_buf[s] = c;	/* read new bytes */
-+			if (s < F - 1) text_buf[s + N] = c;  /* If the position is
-+				near the end of buffer, extend the buffer to make
-+				string comparison easier. */
-+			s = (s + 1) & (N - 1);  r = (r + 1) & (N - 1);
-+				/* Since this is a ring buffer, increment the position
-+				   modulo N. */
-+			InsertNode(r);	/* Register the string in text_buf[r..r+F-1] */
-+		}
-+		read += i;
-+		while (i++ < last_match_length) {	/* After the end of text, */
-+			DeleteNode(s);					/* no need to read, but */
-+			s = (s + 1) & (N - 1);  r = (r + 1) & (N - 1);
-+			if (--len) InsertNode(r);		/* buffer may not be empty. */
-+		}
-+	} while (len > 0);	/* until length of string to be processed is zero */
-+	if (code_buf_ptr > 1) {		/* Send remaining code. */
-+		if ((op + code_buf_ptr) > dstend) {
-+			*dstlen = written;
-+			return -1;
-+		}
-+		for (i = 0; i < code_buf_ptr; *(op++) = code_buf[i++]);
-+		written += code_buf_ptr;
-+		*srclen = read;
-+	}
-+	*dstlen = written;
-+	return 0;
-+}
-+
-+static int Decode(unsigned char *srcbuf, unsigned char *dstbuf, unsigned long srclen,
-+					unsigned long dstlen)	/* Just the reverse of Encode(). */
-+{
-+	unsigned long i, r, c, j, k, flags;
-+	unsigned char *ip, *op;
-+	unsigned long written;
-+	unsigned long read;
-+	unsigned char *srcend = srcbuf + srclen;
-+	unsigned char *dstend = dstbuf + dstlen;
-+	read = written = 0;
-+	ip = srcbuf;
-+	op = dstbuf;
-+	for (i = 0; i < N - F; i++) text_buf[i] = ' ';
-+	r = N - F;  flags = 0;
-+	for ( ; ; ) {
-+		if (((flags >>= 1) & 256) == 0) {
-+			if (ip >= srcend) return 0;
-+			c = *(ip++);
-+			flags = c | 0xff00;		/* uses higher byte cleverly */
-+		}							/* to count eight */
-+		if (flags & 1) {
-+			if (ip >= srcend) return 0;
-+			c = *(ip++);
-+			if (op >= dstend) return -1;
-+			*(op++) = text_buf[r++] = c;  r &= (N - 1);
-+		} else {
-+			if ((ip + 2) > srcend) return 0;
-+			i = *(ip++);
-+			j = *(ip++);
-+			i |= ((j & 0xf0) << 4);  j = (j & 0x0f) + THRESHOLD;
-+			if ((op + j + 1) > dstend) return -1;
-+			for (k = 0; k <= j; k++) {
-+				c = text_buf[(i + k) & (N - 1)];
-+				*(op++) = text_buf[r++] = c;  r &= (N - 1);
-+			}
-+		}
-+	}
-+}
-+
-+/* interface to jffs2 bbc follows */
-+
-+#include "jffs2_bbc_framework.h"
-+
-+
-+#define JFFS2_BBC_LZSS_BLOCK_SIGN {0x27, 0x6f, 0x12, 0xc4}
-+
-+static int
-+jffs2_bbc_lzss_compressor_init (void);
-+
-+static void
-+jffs2_bbc_lzss_compressor_deinit (void);
-+
-+static int
-+jffs2_bbc_lzss_compress (void *model, unsigned char *input,
-+			unsigned char *output, unsigned long *sourcelen,
-+			unsigned long *dstlen);
-+
-+static int
-+jffs2_bbc_lzss_estimate (void *model, unsigned char *input,
-+			unsigned long sourcelen, unsigned long *dstlen,
-+			unsigned long *readtime, unsigned long *writetime);
-+
-+static int
-+jffs2_bbc_lzss_decompress (void *model, unsigned char *input,
-+			  unsigned char *output, unsigned long sourcelen,
-+			  unsigned long dstlen);
-+
-+static char *
-+jffs2_bbc_lzss_proc_info (void);
-+
-+static int
-+jffs2_bbc_lzss_proc_command (char *command);
-+
-+struct jffs2_bbc_compressor_type jffs2_bbc_lzss = {
-+	"lzss",
-+	0,
-+	JFFS2_BBC_LZSS_BLOCK_SIGN,
-+	jffs2_bbc_lzss_compressor_init,
-+	NULL,
-+	NULL,
-+	jffs2_bbc_lzss_compressor_deinit,
-+	jffs2_bbc_lzss_compress,
-+	jffs2_bbc_lzss_estimate,
-+	jffs2_bbc_lzss_decompress,
-+	jffs2_bbc_lzss_proc_info,
-+	jffs2_bbc_lzss_proc_command
-+};
-+
-+static int
-+jffs2_bbc_lzss_compressor_init (void)
-+{
-+	return 0;
-+}
-+
-+static void
-+jffs2_bbc_lzss_compressor_deinit (void)
-+{
-+}
-+
-+static int
-+jffs2_bbc_lzss_compress (void *model, unsigned char *input,
-+			unsigned char *output, unsigned long *sourcelen,
-+			unsigned long *dstlen)
-+{
-+	int retval;
-+	unsigned long dst = *dstlen;
-+	*(output++) = jffs2_bbc_lzss.block_sign[0];
-+	*(output++) = jffs2_bbc_lzss.block_sign[1];
-+	dst -= 2;
-+	retval = Encode(input, output, sourcelen, &dst);
-+	dst += 2;
-+	*dstlen = dst;
-+	return retval;
-+}
-+
-+static int
-+jffs2_bbc_lzss_estimate (void *model, unsigned char *input,
-+			unsigned long sourcelen, unsigned long *dstlen,
-+			unsigned long *readtime, unsigned long *writetime)
-+{
-+	*dstlen = sourcelen * 60 / 100;
-+	*readtime = JFFS2_BBC_ZLIB_READ_TIME * 12 / 10;
-+	*writetime = JFFS2_BBC_ZLIB_WRITE_TIME * 3;
-+	return 0;
-+}
-+
-+static int
-+jffs2_bbc_lzss_decompress (void *model, unsigned char *input,
-+			  unsigned char *output, unsigned long sourcelen,
-+			  unsigned long dstlen)
-+{
-+	if (	( *(input++) != (unsigned char)jffs2_bbc_lzss.block_sign[0] ) ||
-+			( *(input++) != (unsigned char)jffs2_bbc_lzss.block_sign[1] )
-+	   ) {
-+		return -1;
-+	} else {
-+		return Decode(input, output, sourcelen - 2, dstlen);
-+	}
-+}
-+
-+static char *
-+jffs2_bbc_lzss_proc_info (void)
-+{
-+	return "Lempel-Ziv-Storer-Szymanski compression module";
-+}
-+
-+static int
-+jffs2_bbc_lzss_proc_command (char *command)
-+{
-+	return 0;
-+}
-+
-+struct jffs2_bbc_compressor_type *
-+jffs2_bbc_lzss_init (int mode)
-+{
-+	if (jffs2_bbc_register_compressor (&jffs2_bbc_lzss) == 0)
-+	{
-+		return &jffs2_bbc_lzss;
-+	}
-+	else
-+	{
-+		return NULL;
-+	}
-+}
-+
-+void
-+jffs2_bbc_lzss_deinit (void)
-+{
-+	jffs2_bbc_unregister_compressor (&jffs2_bbc_lzss);
-+}
-diff -Nur linux-mips-cvs/fs/jffs2/linux-2.4.25.hpatch linux-mips/fs/jffs2/linux-2.4.25.hpatch
---- linux-mips-cvs/fs/jffs2/linux-2.4.25.hpatch	1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/fs/jffs2/linux-2.4.25.hpatch	2005-02-07 05:08:34.000000000 +0100
-@@ -0,0 +1,97 @@
-+FMakefile
-+=BBC insertion
-+-COMPR_OBJS
-+iMakefile.bbc.inc
-++
-+I
-+?JFFS2_OBJS
-++	$(JFFS2_BBC_KERNEL_OBJS) \
-+
-+F../Config.in
-+=BBC insertion
-+-tristate 'Compressed ROM file system support' CONFIG_CRAMFS
-+iConfig.in.bbc.inc
-++
-+I
-+F../../Documentation/Configure.help
-+=BBC insertion
-+-JFFS stats available
-+iConfigure.help.bbc.inc
-++
-+I
-+Fcompr_zlib.c
-+=(de)compress->(de)compress2
-+-int zlib_compress(unsigned char *data_in, unsigned char *cpage_out,
-++int jffs2_zlib_compress2(unsigned char *data_in, unsigned char *cpage_out,
-+-void zlib_decompress(unsigned char *data_in, unsigned char *cpage_out,
-++void jffs2_zlib_decompress2(unsigned char *data_in, unsigned char *cpage_out,
-+?inflateEnd(&strm);
-+?}
-++
-++extern int jffs2_zlib_compress(unsigned char *data_in, unsigned char *cpage_out, __u32 * sourcelen, __u32 * dstlen);
-++extern void jffs2_zlib_decompress(unsigned char *data_in, unsigned char *cpage_out, __u32 srclen, __u32 destlen);
-++
-++int zlib_compress(unsigned char *data_in, unsigned char *cpage_out,
-++                   __u32 *sourcelen, __u32 *dstlen)
-++{
-++		return jffs2_zlib_compress(data_in,cpage_out,sourcelen,dstlen);
-++}
-++
-++void zlib_decompress(unsigned char *data_in, unsigned char *cpage_out,
-++                      __u32 srclen, __u32 destlen)
-++{
-++		jffs2_zlib_decompress(data_in,cpage_out,srclen,destlen);
-++}
-++
-+
-+Ffile.c
-+=set_act_sb before write
-+-#include
-++#include "jffs2_bbc_framework.h" /**BBC**/
-+I
-+?int jffs2_commit_write
-+-jffs2_compress(
-++			jffs2_bbc_model_set_act_sb(c); /**BBC**/
-+I
-+
-+Fgc.c
-+=set_act_sb before write
-+-#include
-++#include "jffs2_bbc_framework.h" /**BBC**/
-+I
-+?int jffs2_garbage_collect_dnode(
-+-jffs2_compress(
-++			jffs2_bbc_model_set_act_sb(c); /**BBC**/
-+I
-+
-+Fread.c
-+=set_act_sb before read
-+-#include
-++#include "jffs2_bbc_framework.h" /**BBC**/
-+I
-+?int jffs2_read_dnode(
-+-jffs2_decompress(
-++		jffs2_bbc_model_set_act_sb(c); /**BBC**/
-+I
-+
-+Fsuper.c
-+=init, load_model
-+-#include
-++#include "jffs2_bbc_fs.h" /**BBC**/
-+I
-+?struct super_block *jffs2_read_super(
-+-return sb;
-++	jffs2_bbc_load_model(sb);  /**BBC**/
-+I
-+?void jffs2_put_super
-+?c = JFFS2_SB_INFO
-++	jffs2_bbc_unload_model(sb); /**BBC**/
-+?init_jffs2_fs(void)
-+?int ret;
-++
-++	jffs2_bbc_proc_init();   /**BBC**/
-++
-+?exit_jffs2_fs(void)
-+?{
-++	jffs2_bbc_proc_deinit(); /**BBC**/
-++
-diff -Nur linux-mips-cvs/fs/jffs2/read.c linux-mips/fs/jffs2/read.c
---- linux-mips-cvs/fs/jffs2/read.c	2003-11-17 02:07:44.000000000 +0100
-+++ linux-mips/fs/jffs2/read.c	2005-02-07 05:08:35.000000000 +0100
-@@ -35,6 +35,7 @@
-  *
-  */
- 
-+#include "jffs2_bbc_framework.h" /**BBC**/
- #include <linux/kernel.h>
- #include <linux/slab.h>
- #include <linux/jffs2.h>
-@@ -140,6 +141,7 @@
- 	D2(printk(KERN_DEBUG "Data CRC matches calculated CRC %08x\n", crc));
- 	if (ri->compr != JFFS2_COMPR_NONE) {
- 		D2(printk(KERN_DEBUG "Decompress %d bytes from %p to %d bytes at %p\n", ri->csize, readbuf, ri->dsize, decomprbuf)); 
-+		jffs2_bbc_model_set_act_sb(c); /**BBC**/
- 		ret = jffs2_decompress(ri->compr, readbuf, decomprbuf, ri->csize, ri->dsize);
- 		if (ret) {
- 			printk(KERN_WARNING "Error: jffs2_decompress returned %d\n", ret);
-diff -Nur linux-mips-cvs/fs/jffs2/super.c linux-mips/fs/jffs2/super.c
---- linux-mips-cvs/fs/jffs2/super.c	2003-01-11 18:53:17.000000000 +0100
-+++ linux-mips/fs/jffs2/super.c	2005-02-07 05:08:35.000000000 +0100
-@@ -35,6 +35,7 @@
-  *
-  */
- 
-+#include "jffs2_bbc_fs.h" /**BBC**/
- #include <linux/config.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
-@@ -272,6 +273,7 @@
- 	sb->s_magic = JFFS2_SUPER_MAGIC;
- 	if (!(sb->s_flags & MS_RDONLY))
- 		jffs2_start_garbage_collect_thread(c);
-+	jffs2_bbc_load_model(sb);  /**BBC**/
- 	return sb;
- 
-  out_root_i:
-@@ -288,6 +290,7 @@
- void jffs2_put_super (struct super_block *sb)
- {
- 	struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
-+	jffs2_bbc_unload_model(sb); /**BBC**/
- 
- 	D2(printk(KERN_DEBUG "jffs2: jffs2_put_super()\n"));
- 
-@@ -344,6 +347,9 @@
- {
- 	int ret;
- 
-+	jffs2_bbc_proc_init();   /**BBC**/
-+
-+
- 	printk(KERN_NOTICE "JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.\n");
- 
- #ifdef JFFS2_OUT_OF_KERNEL
-@@ -388,6 +394,8 @@
- 
- static void __exit exit_jffs2_fs(void)
- {
-+	jffs2_bbc_proc_deinit(); /**BBC**/
-+
- 	jffs2_destroy_slab_caches();
- 	jffs2_zlib_exit();
- 	unregister_filesystem(&jffs2_fs_type);
diff --git a/openwrt/target/linux/generic-2.4/patches/004-exec_pagesize.patch b/openwrt/target/linux/generic-2.4/patches/004-exec_pagesize.patch
deleted file mode 100644
index a7b1d04064..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/004-exec_pagesize.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux.old/include/asm-mips/param.h	2005-01-19 15:10:12.000000000 +0100
-+++ linux.dev/include/asm-mips/param.h	2005-05-30 02:42:06.000000000 +0200
-@@ -55,7 +55,7 @@
- #endif /* defined(__KERNEL__)  */
- #endif /* defined(HZ)  */
- 
--#define EXEC_PAGESIZE	65536
-+#define EXEC_PAGESIZE	4096
- 
- #ifndef NGROUPS
- #define NGROUPS		32
diff --git a/openwrt/target/linux/generic-2.4/patches/005-mtd_flashtypes.patch b/openwrt/target/linux/generic-2.4/patches/005-mtd_flashtypes.patch
deleted file mode 100644
index 9115b9f611..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/005-mtd_flashtypes.patch
+++ /dev/null
@@ -1,925 +0,0 @@
-diff -Nur linux-2.4.30/drivers/mtd/chips/Config.in linux-2.4.30.openwrt/drivers/mtd/chips/Config.in
---- linux-2.4.30/drivers/mtd/chips/Config.in	2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.30.openwrt/drivers/mtd/chips/Config.in	2005-06-28 11:26:26.000000000 +0200
-@@ -45,6 +45,7 @@
- dep_tristate '  Support for Intel/Sharp flash chips' CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_GEN_PROBE
- dep_tristate '  Support for AMD/Fujitsu flash chips' CONFIG_MTD_CFI_AMDSTD $CONFIG_MTD_GEN_PROBE
- dep_tristate '  Support for ST (Advanced Architecture) flash chips' CONFIG_MTD_CFI_STAA $CONFIG_MTD_GEN_PROBE
-+dep_tristate '  Support for SST flash chips' CONFIG_MTD_CFI_SSTSTD $CONFIG_MTD_GEN_PROBE
- 
- dep_tristate '  Support for RAM chips in bus mapping' CONFIG_MTD_RAM $CONFIG_MTD
- dep_tristate '  Support for ROM chips in bus mapping' CONFIG_MTD_ROM $CONFIG_MTD
-diff -Nur linux-2.4.30/drivers/mtd/chips/Makefile linux-2.4.30.openwrt/drivers/mtd/chips/Makefile
---- linux-2.4.30/drivers/mtd/chips/Makefile	2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.30.openwrt/drivers/mtd/chips/Makefile	2005-06-28 11:26:26.000000000 +0200
-@@ -18,6 +18,7 @@
- obj-$(CONFIG_MTD_AMDSTD)	+= amd_flash.o 
- obj-$(CONFIG_MTD_CFI)		+= cfi_probe.o
- obj-$(CONFIG_MTD_CFI_STAA)	+= cfi_cmdset_0020.o
-+obj-$(CONFIG_MTD_CFI_SSTSTD)   += cfi_cmdset_0701.o
- obj-$(CONFIG_MTD_CFI_AMDSTD)	+= cfi_cmdset_0002.o
- obj-$(CONFIG_MTD_CFI_INTELEXT)	+= cfi_cmdset_0001.o
- obj-$(CONFIG_MTD_GEN_PROBE)	+= gen_probe.o
-diff -Nur linux-2.4.30/drivers/mtd/chips/cfi_cmdset_0701.c linux-2.4.30.openwrt/drivers/mtd/chips/cfi_cmdset_0701.c
---- linux-2.4.30/drivers/mtd/chips/cfi_cmdset_0701.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.openwrt/drivers/mtd/chips/cfi_cmdset_0701.c	2005-06-28 11:26:26.000000000 +0200
-@@ -0,0 +1,855 @@
-+/*
-+ * Common Flash Interface support:
-+ *   SST Standard Vendor Command Set (ID 0x0701)
-+ *
-+ * Copyright (C) 2000 Crossnet Co. <info@crossnet.co.jp>
-+ *
-+ * 2_by_8 routines added by Simon Munton
-+ *
-+ * This code is GPL
-+ *
-+ * $Id: cfi_cmdset_0701.c,v 1.1 2005/03/16 13:50:00 wbx Exp $
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <asm/io.h>
-+#include <asm/byteorder.h>
-+
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/cfi.h>
-+
-+static int cfi_sststd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
-+static int cfi_sststd_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+static int cfi_sststd_erase_onesize(struct mtd_info *, struct erase_info *);
-+static int cfi_sststd_erase_varsize(struct mtd_info *, struct erase_info *);
-+static void cfi_sststd_sync (struct mtd_info *);
-+static int cfi_sststd_suspend (struct mtd_info *);
-+static void cfi_sststd_resume (struct mtd_info *);
-+
-+static void cfi_sststd_destroy(struct mtd_info *);
-+
-+struct mtd_info *cfi_cmdset_0701(struct map_info *, int);
-+static struct mtd_info *cfi_sststd_setup (struct map_info *);
-+
-+
-+static struct mtd_chip_driver cfi_sststd_chipdrv = {
-+	probe: NULL, /* Not usable directly */
-+	destroy: cfi_sststd_destroy,
-+	name: "cfi_cmdset_0701",
-+	module: THIS_MODULE
-+};
-+
-+struct mtd_info *cfi_cmdset_0701(struct map_info *map, int primary)
-+{
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	int ofs_factor = cfi->interleave * cfi->device_type;
-+	int i;
-+	__u8 major, minor;
-+	__u32 base = cfi->chips[0].start;
-+
-+	if (cfi->cfi_mode==1){
-+		__u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR;
-+
-+		cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL);
-+		
-+		major = cfi_read_query(map, base + (adr+3)*ofs_factor);
-+		minor = cfi_read_query(map, base + (adr+4)*ofs_factor);
-+		
-+		printk(" SST Query Table v%c.%c at 0x%4.4X\n",
-+		       major, minor, adr);
-+		cfi_send_gen_cmd(0xf0, 0x5555, base, map, cfi, cfi->device_type, NULL);
-+		
-+		cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x90, 0x5555, base, map, cfi, cfi->device_type, NULL);
-+		cfi->mfr = cfi_read_query(map, base);
-+		cfi->id = cfi_read_query(map, base + ofs_factor);
-+
-+		cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL);
-+		
-+		switch (cfi->device_type) {
-+		case CFI_DEVICETYPE_X16:
-+			cfi->addr_unlock1 = 0x5555;
-+			cfi->addr_unlock2 = 0x2AAA;
-+			break;
-+		default:
-+			printk(KERN_NOTICE "Eep. Unknown cfi_cmdset_0701 device type %d\n", cfi->device_type);
-+			return NULL;
-+		}
-+	} /* CFI mode */
-+
-+	for (i=0; i< cfi->numchips; i++) {
-+		cfi->chips[i].word_write_time = 1<<cfi->cfiq->WordWriteTimeoutTyp;
-+		cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
-+		cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp;
-+	}		
-+	
-+	map->fldrv = &cfi_sststd_chipdrv;
-+	MOD_INC_USE_COUNT;
-+
-+	cfi_send_gen_cmd(0xf0, 0x5555, base, map, cfi, cfi->device_type, NULL);
-+	return cfi_sststd_setup(map);
-+}
-+
-+static struct mtd_info *cfi_sststd_setup(struct map_info *map)
-+{
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	struct mtd_info *mtd;
-+	unsigned long devsize = (1<<cfi->cfiq->DevSize) * cfi->interleave;
-+
-+	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
-+	printk("number of %s chips: %d\n", (cfi->cfi_mode)?"JEDEC":"CFI",cfi->numchips);
-+
-+	if (!mtd) {
-+	  printk("Failed to allocate memory for MTD device\n");
-+	  kfree(cfi->cmdset_priv);
-+	  return NULL;
-+	}
-+
-+	memset(mtd, 0, sizeof(*mtd));
-+	mtd->priv = map;
-+	mtd->type = MTD_NORFLASH;
-+	/* Also select the correct geometry setup too */ 
-+	mtd->size = devsize * cfi->numchips;
-+	
-+	if (cfi->cfiq->NumEraseRegions == 1) {
-+		/* No need to muck about with multiple erase sizes */
-+		mtd->erasesize = ((cfi->cfiq->EraseRegionInfo[0] >> 8) & ~0xff) * cfi->interleave;
-+	} else {
-+		unsigned long offset = 0;
-+		int i,j;
-+
-+		mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips;
-+		mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) * mtd->numeraseregions, GFP_KERNEL);
-+		if (!mtd->eraseregions) { 
-+			printk("Failed to allocate memory for MTD erase region info\n");
-+			kfree(cfi->cmdset_priv);
-+			return NULL;
-+		}
-+			
-+		for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
-+			unsigned long ernum, ersize;
-+			ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff) * cfi->interleave;
-+			ernum = (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1;
-+			
-+			if (mtd->erasesize < ersize) {
-+				mtd->erasesize = ersize;
-+			}
-+			for (j=0; j<cfi->numchips; j++) {
-+				mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].offset = (j*devsize)+offset;
-+				mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].erasesize = ersize;
-+				mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].numblocks = ernum;
-+			}
-+			offset += (ersize * ernum);
-+		}
-+
-+		// debug
-+		for (i=0; i<mtd->numeraseregions;i++){
-+			printk("%d: offset=0x%x,size=0x%x,blocks=%d\n",
-+			       i,mtd->eraseregions[i].offset,
-+			       mtd->eraseregions[i].erasesize,
-+			       mtd->eraseregions[i].numblocks);
-+		}
-+	}
-+
-+	switch (CFIDEV_BUSWIDTH)
-+	{
-+	case 1:
-+	case 2:
-+	case 4:
-+		if (mtd->numeraseregions > 1)
-+			mtd->erase = cfi_sststd_erase_varsize;
-+		else
-+			mtd->erase = cfi_sststd_erase_onesize;
-+		mtd->read = cfi_sststd_read;
-+		mtd->write = cfi_sststd_write;
-+		break;
-+
-+	default:
-+	        printk("Unsupported buswidth\n");
-+		kfree(mtd);
-+		kfree(cfi->cmdset_priv);
-+		return NULL;
-+		break;
-+	}
-+	mtd->sync = cfi_sststd_sync;
-+	mtd->suspend = cfi_sststd_suspend;
-+	mtd->resume = cfi_sststd_resume;
-+	mtd->flags = MTD_CAP_NORFLASH;
-+	map->fldrv = &cfi_sststd_chipdrv;
-+	mtd->name = map->name;
-+	MOD_INC_USE_COUNT;
-+	return mtd;
-+}
-+
-+static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf)
-+{
-+	DECLARE_WAITQUEUE(wait, current);
-+	unsigned long timeo = jiffies + HZ;
-+
-+ retry:
-+	cfi_spin_lock(chip->mutex);
-+
-+	if (chip->state != FL_READY){
-+	        printk("Waiting for chip to read, status = %d\n", chip->state);
-+		set_current_state(TASK_UNINTERRUPTIBLE);
-+		add_wait_queue(&chip->wq, &wait);
-+                
-+		cfi_spin_unlock(chip->mutex);
-+
-+		schedule();
-+		remove_wait_queue(&chip->wq, &wait);
-+		timeo = jiffies + HZ;
-+
-+		goto retry;
-+	}	
-+
-+	adr += chip->start;
-+
-+	chip->state = FL_READY;
-+
-+	map->copy_from(map, buf, adr, len);
-+
-+	wake_up(&chip->wq);
-+	cfi_spin_unlock(chip->mutex);
-+
-+	return 0;
-+}
-+
-+static int cfi_sststd_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	unsigned long ofs;
-+	int chipnum;
-+	int ret = 0;
-+
-+	/* ofs: offset within the first chip that the first read should start */
-+
-+	chipnum = (from >> cfi->chipshift);
-+	ofs = from - (chipnum <<  cfi->chipshift);
-+
-+
-+	*retlen = 0;
-+
-+	while (len) {
-+		unsigned long thislen;
-+
-+		if (chipnum >= cfi->numchips)
-+			break;
-+
-+		if ((len + ofs -1) >> cfi->chipshift)
-+			thislen = (1<<cfi->chipshift) - ofs;
-+		else
-+			thislen = len;
-+
-+		ret = do_read_onechip(map, &cfi->chips[chipnum], ofs, thislen, buf);
-+		if (ret)
-+			break;
-+
-+		*retlen += thislen;
-+		len -= thislen;
-+		buf += thislen;
-+
-+		ofs = 0;
-+		chipnum++;
-+	}
-+	return ret;
-+}
-+
-+static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned long adr, __u32 datum, int fast)
-+{
-+	unsigned long timeo = jiffies + HZ;
-+	unsigned int Last[4];
-+	unsigned long Count = 0;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	DECLARE_WAITQUEUE(wait, current);
-+	int ret = 0;
-+
-+ retry:
-+	cfi_spin_lock(chip->mutex);
-+
-+	if (chip->state != FL_READY){
-+	        printk("Waiting for chip to write, status = %d\n", chip->state);
-+		set_current_state(TASK_UNINTERRUPTIBLE);
-+		add_wait_queue(&chip->wq, &wait);
-+                
-+		cfi_spin_unlock(chip->mutex);
-+
-+		schedule();
-+		remove_wait_queue(&chip->wq, &wait);
-+		printk("Wake up to write:\n");
-+		timeo = jiffies + HZ;
-+
-+		goto retry;
-+	}	
-+
-+	chip->state = FL_WRITING;
-+
-+	adr += chip->start;
-+	ENABLE_VPP(map);
-+    cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL);
-+    cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL);
-+    cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL);
-+
-+	cfi_write(map, datum, adr);
-+
-+	cfi_spin_unlock(chip->mutex);
-+	cfi_udelay(chip->word_write_time);
-+	cfi_spin_lock(chip->mutex);
-+
-+	Last[0] = cfi_read(map, adr);
-+	//	printk("Last[0] is %x\n", Last[0]);
-+	Last[1] = cfi_read(map, adr);
-+	//	printk("Last[1] is %x\n", Last[1]);
-+	Last[2] = cfi_read(map, adr);
-+	//	printk("Last[2] is %x\n", Last[2]);
-+
-+	for (Count = 3; Last[(Count - 1) % 4] != Last[(Count - 2) % 4] && Count < 10000; Count++){
-+		cfi_spin_unlock(chip->mutex);
-+		cfi_udelay(10);
-+		cfi_spin_lock(chip->mutex);
-+		
-+	        Last[Count % 4] = cfi_read(map, adr);
-+		//		printk("Last[%d%%4] is %x\n", Count, Last[Count%4]);
-+	}
-+	
-+	if (Last[(Count - 1) % 4] != datum){
-+		printk("Last[%ld] is %x, datum is %x\n",(Count - 1) % 4,Last[(Count - 1) % 4],datum);
-+	        cfi_send_gen_cmd(0xF0, 0, chip->start, map, cfi, cfi->device_type, NULL);
-+		DISABLE_VPP(map);
-+		ret = -EIO;
-+	}       
-+	DISABLE_VPP(map);
-+	chip->state = FL_READY;
-+	wake_up(&chip->wq);
-+	cfi_spin_unlock(chip->mutex);
-+	
-+	return ret;
-+}
-+
-+static int cfi_sststd_write (struct mtd_info *mtd, loff_t to , size_t len, size_t *retlen, const u_char *buf)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	int ret = 0;
-+	int chipnum;
-+	unsigned long ofs, chipstart;
-+
-+	*retlen = 0;
-+	if (!len)
-+		return 0;
-+
-+	chipnum = to >> cfi->chipshift;
-+	ofs = to  - (chipnum << cfi->chipshift);
-+	chipstart = cfi->chips[chipnum].start;
-+
-+	/* If it's not bus-aligned, do the first byte write */
-+	if (ofs & (CFIDEV_BUSWIDTH-1)) {
-+		unsigned long bus_ofs = ofs & ~(CFIDEV_BUSWIDTH-1);
-+		int i = ofs - bus_ofs;
-+		int n = 0;
-+		u_char tmp_buf[4];
-+		__u32 datum;
-+
-+		map->copy_from(map, tmp_buf, bus_ofs + cfi->chips[chipnum].start, CFIDEV_BUSWIDTH);
-+		while (len && i < CFIDEV_BUSWIDTH)
-+			tmp_buf[i++] = buf[n++], len--;
-+
-+		if (cfi_buswidth_is_2()) {
-+			datum = *(__u16*)tmp_buf;
-+		} else if (cfi_buswidth_is_4()) {
-+			datum = *(__u32*)tmp_buf;
-+		} else {
-+			return -EINVAL;  /* should never happen, but be safe */
-+		}
-+
-+		ret = do_write_oneword(map, &cfi->chips[chipnum], 
-+				bus_ofs, datum, 0);
-+		if (ret) 
-+			return ret;
-+		
-+		ofs += n;
-+		buf += n;
-+		(*retlen) += n;
-+
-+		if (ofs >> cfi->chipshift) {
-+			chipnum ++; 
-+			ofs = 0;
-+			if (chipnum == cfi->numchips)
-+				return 0;
-+		}
-+	}
-+	
-+	/* We are now aligned, write as much as possible */
-+	while(len >= CFIDEV_BUSWIDTH) {
-+		__u32 datum;
-+
-+		if (cfi_buswidth_is_1()) {
-+			datum = *(__u8*)buf;
-+		} else if (cfi_buswidth_is_2()) {
-+			datum = *(__u16*)buf;
-+		} else if (cfi_buswidth_is_4()) {
-+			datum = *(__u32*)buf;
-+		} else {
-+			return -EINVAL;
-+		}
-+		ret = do_write_oneword(map, &cfi->chips[chipnum],
-+				       ofs, datum, cfi->fast_prog);
-+		if (ret) {
-+			return ret;
-+		}
-+
-+		ofs += CFIDEV_BUSWIDTH;
-+		buf += CFIDEV_BUSWIDTH;
-+		(*retlen) += CFIDEV_BUSWIDTH;
-+		len -= CFIDEV_BUSWIDTH;
-+
-+		if (ofs >> cfi->chipshift) {
-+			chipnum ++; 
-+			ofs = 0;
-+			if (chipnum == cfi->numchips)
-+				return 0;
-+			chipstart = cfi->chips[chipnum].start;
-+		}
-+	}
-+
-+	if (len & (CFIDEV_BUSWIDTH-1)) {
-+		int i = 0, n = 0;
-+		u_char tmp_buf[4];
-+		__u32 datum;
-+
-+		map->copy_from(map, tmp_buf, ofs + cfi->chips[chipnum].start, CFIDEV_BUSWIDTH);
-+		while (len--)
-+			tmp_buf[i++] = buf[n++];
-+
-+		if (cfi_buswidth_is_2()) {
-+			datum = *(__u16*)tmp_buf;
-+		} else if (cfi_buswidth_is_4()) {
-+			datum = *(__u32*)tmp_buf;
-+		} else {
-+			return -EINVAL;  /* should never happen, but be safe */
-+		}
-+
-+		ret = do_write_oneword(map, &cfi->chips[chipnum], 
-+				ofs, datum, 0);
-+		if (ret) 
-+			return ret;
-+		
-+		(*retlen) += n;
-+	}
-+
-+	return 0;
-+}
-+
-+static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr)
-+{
-+	unsigned int status;
-+	unsigned long timeo = jiffies + HZ;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	unsigned int rdy_mask;
-+	DECLARE_WAITQUEUE(wait, current);
-+
-+ retry:
-+	cfi_spin_lock(chip->mutex);
-+
-+	if (chip->state != FL_READY){
-+		set_current_state(TASK_UNINTERRUPTIBLE);
-+		add_wait_queue(&chip->wq, &wait);
-+                
-+		cfi_spin_unlock(chip->mutex);
-+
-+		schedule();
-+		remove_wait_queue(&chip->wq, &wait);
-+		timeo = jiffies + HZ;
-+
-+		goto retry;
-+	}	
-+
-+	chip->state = FL_ERASING;
-+
-+	adr += chip->start;
-+	ENABLE_VPP(map);
-+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL);
-+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL);
-+	cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL);
-+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL);
-+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL);
-+	cfi_write(map, CMD(0x30), adr);
-+	
-+	timeo = jiffies + (HZ*20);
-+
-+	cfi_spin_unlock(chip->mutex);
-+	schedule_timeout(HZ);
-+	cfi_spin_lock(chip->mutex);
-+	
-+	rdy_mask = CMD(0x80);
-+
-+	/* Once the state machine's known to be working I'll do that */
-+
-+	while ( ( (status = cfi_read(map,adr)) & rdy_mask ) != rdy_mask ) {
-+		static int z=0;
-+
-+		if (chip->state != FL_ERASING) {
-+			/* Someone's suspended the erase. Sleep */
-+			set_current_state(TASK_UNINTERRUPTIBLE);
-+			add_wait_queue(&chip->wq, &wait);
-+			
-+			cfi_spin_unlock(chip->mutex);
-+			printk("erase suspended. Sleeping\n");
-+			
-+			schedule();
-+			remove_wait_queue(&chip->wq, &wait);
-+			timeo = jiffies + (HZ*2); 
-+			cfi_spin_lock(chip->mutex);
-+			continue;
-+		}
-+
-+		/* OK Still waiting */
-+		if (time_after(jiffies, timeo)) {
-+			chip->state = FL_READY;
-+			cfi_spin_unlock(chip->mutex);
-+			printk("waiting for erase to complete timed out.");
-+			DISABLE_VPP(map);
-+			return -EIO;
-+		}
-+		
-+		/* Latency issues. Drop the lock, wait a while and retry */
-+		cfi_spin_unlock(chip->mutex);
-+
-+		z++;
-+		if ( 0 && !(z % 100 )) 
-+			printk("chip not ready yet after erase. looping\n");
-+
-+		cfi_udelay(1);
-+		
-+		cfi_spin_lock(chip->mutex);
-+		continue;
-+	}
-+	
-+	/* Done and happy. */
-+	DISABLE_VPP(map);
-+	chip->state = FL_READY;
-+	wake_up(&chip->wq);
-+	cfi_spin_unlock(chip->mutex);
-+	return 0;
-+}
-+
-+static int cfi_sststd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	unsigned long adr, len;
-+	int chipnum, ret = 0;
-+	int i, first;
-+	struct mtd_erase_region_info *regions = mtd->eraseregions;
-+
-+	if (instr->addr > mtd->size)
-+		return -EINVAL;
-+
-+	if ((instr->len + instr->addr) > mtd->size)
-+		return -EINVAL;
-+
-+	/* Check that both start and end of the requested erase are
-+	 * aligned with the erasesize at the appropriate addresses.
-+	 */
-+
-+	i = 0;
-+
-+	/* Skip all erase regions which are ended before the start of 
-+	   the requested erase. Actually, to save on the calculations,
-+	   we skip to the first erase region which starts after the
-+	   start of the requested erase, and then go back one.
-+	*/
-+	
-+	while (i < mtd->numeraseregions && instr->addr >= regions[i].offset)
-+	       i++;
-+	i--;
-+
-+	/* OK, now i is pointing at the erase region in which this 
-+	   erase request starts. Check the start of the requested
-+	   erase range is aligned with the erase size which is in
-+	   effect here.
-+	*/
-+
-+	if (instr->addr & (regions[i].erasesize-1))
-+		return -EINVAL;
-+
-+	/* Remember the erase region we start on */
-+	first = i;
-+
-+	/* Next, check that the end of the requested erase is aligned
-+	 * with the erase region at that address.
-+	 */
-+
-+	while (i<mtd->numeraseregions && (instr->addr + instr->len) >= regions[i].offset)
-+		i++;
-+
-+	/* As before, drop back one to point at the region in which
-+	   the address actually falls
-+	*/
-+	i--;
-+	
-+	if ((instr->addr + instr->len) & (regions[i].erasesize-1))
-+		return -EINVAL;
-+	
-+	chipnum = instr->addr >> cfi->chipshift;
-+	adr = instr->addr - (chipnum << cfi->chipshift);
-+	len = instr->len;
-+
-+	i=first;
-+
-+	while(len) {
-+		ret = do_erase_oneblock(map, &cfi->chips[chipnum], adr);
-+
-+		if (ret)
-+			return ret;
-+
-+		adr += regions[i].erasesize;
-+		len -= regions[i].erasesize;
-+
-+		if (adr % (1<< cfi->chipshift) == ((regions[i].offset + (regions[i].erasesize * regions[i].numblocks)) %( 1<< cfi->chipshift)))
-+			i++;
-+
-+		if (adr >> cfi->chipshift) {
-+			adr = 0;
-+			chipnum++;
-+			
-+			if (chipnum >= cfi->numchips)
-+			break;
-+		}
-+	}
-+
-+	instr->state = MTD_ERASE_DONE;
-+	if (instr->callback)
-+		instr->callback(instr);
-+	
-+	return 0;
-+}
-+
-+static int cfi_sststd_erase_onesize(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	unsigned long adr, len;
-+	int chipnum, ret = 0;
-+
-+	if (instr->addr & (mtd->erasesize - 1))
-+		return -EINVAL;
-+
-+	if (instr->len & (mtd->erasesize -1))
-+		return -EINVAL;
-+
-+	if ((instr->len + instr->addr) > mtd->size)
-+		return -EINVAL;
-+
-+	chipnum = instr->addr >> cfi->chipshift;
-+	adr = instr->addr - (chipnum << cfi->chipshift);
-+	len = instr->len;
-+
-+	while(len) {
-+		ret = do_erase_oneblock(map, &cfi->chips[chipnum], adr);
-+
-+		if (ret)
-+			return ret;
-+
-+		adr += mtd->erasesize;
-+		len -= mtd->erasesize;
-+
-+		if (adr >> cfi->chipshift) {
-+			adr = 0;
-+			chipnum++;
-+			
-+			if (chipnum >= cfi->numchips)
-+			break;
-+		}
-+	}
-+		
-+	instr->state = MTD_ERASE_DONE;
-+	if (instr->callback)
-+		instr->callback(instr);
-+	
-+	return 0;
-+}
-+
-+static void cfi_sststd_sync (struct mtd_info *mtd)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	int i;
-+	struct flchip *chip;
-+	int ret = 0;
-+	DECLARE_WAITQUEUE(wait, current);
-+
-+	for (i=0; !ret && i<cfi->numchips; i++) {
-+		chip = &cfi->chips[i];
-+
-+	retry:
-+		cfi_spin_lock(chip->mutex);
-+
-+		switch(chip->state) {
-+		case FL_READY:
-+		case FL_STATUS:
-+		case FL_CFI_QUERY:
-+		case FL_JEDEC_QUERY:
-+			chip->oldstate = chip->state;
-+			chip->state = FL_SYNCING;
-+			/* No need to wake_up() on this state change - 
-+			 * as the whole point is that nobody can do anything
-+			 * with the chip now anyway.
-+			 */
-+		case FL_SYNCING:
-+			cfi_spin_unlock(chip->mutex);
-+			break;
-+
-+		default:
-+			/* Not an idle state */
-+			add_wait_queue(&chip->wq, &wait);
-+			
-+			cfi_spin_unlock(chip->mutex);
-+
-+			schedule();
-+
-+		        remove_wait_queue(&chip->wq, &wait);
-+			
-+			goto retry;
-+		}
-+	}
-+
-+	/* Unlock the chips again */
-+
-+	for (i--; i >=0; i--) {
-+		chip = &cfi->chips[i];
-+
-+		cfi_spin_lock(chip->mutex);
-+		
-+		if (chip->state == FL_SYNCING) {
-+			chip->state = chip->oldstate;
-+			wake_up(&chip->wq);
-+		}
-+		cfi_spin_unlock(chip->mutex);
-+	}
-+}
-+
-+
-+static int cfi_sststd_suspend(struct mtd_info *mtd)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	int i;
-+	struct flchip *chip;
-+	int ret = 0;
-+//printk("suspend\n");
-+
-+	for (i=0; !ret && i<cfi->numchips; i++) {
-+		chip = &cfi->chips[i];
-+
-+		cfi_spin_lock(chip->mutex);
-+
-+		switch(chip->state) {
-+		case FL_READY:
-+		case FL_STATUS:
-+		case FL_CFI_QUERY:
-+		case FL_JEDEC_QUERY:
-+			chip->oldstate = chip->state;
-+			chip->state = FL_PM_SUSPENDED;
-+			/* No need to wake_up() on this state change - 
-+			 * as the whole point is that nobody can do anything
-+			 * with the chip now anyway.
-+			 */
-+		case FL_PM_SUSPENDED:
-+			break;
-+
-+		default:
-+			ret = -EAGAIN;
-+			break;
-+		}
-+		cfi_spin_unlock(chip->mutex);
-+	}
-+
-+	/* Unlock the chips again */
-+
-+	if (ret) {
-+    		for (i--; i >=0; i--) {
-+			chip = &cfi->chips[i];
-+
-+			cfi_spin_lock(chip->mutex);
-+		
-+			if (chip->state == FL_PM_SUSPENDED) {
-+				chip->state = chip->oldstate;
-+				wake_up(&chip->wq);
-+			}
-+			cfi_spin_unlock(chip->mutex);
-+		}
-+	}
-+	
-+	return ret;
-+}
-+
-+static void cfi_sststd_resume(struct mtd_info *mtd)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	int i;
-+	struct flchip *chip;
-+//printk("resume\n");
-+
-+	for (i=0; i<cfi->numchips; i++) {
-+	
-+		chip = &cfi->chips[i];
-+
-+		cfi_spin_lock(chip->mutex);
-+		
-+		if (chip->state == FL_PM_SUSPENDED) {
-+			chip->state = FL_READY;
-+			cfi_write(map, CMD(0xF0), chip->start);
-+			wake_up(&chip->wq);
-+		}
-+		else
-+			printk("Argh. Chip not in PM_SUSPENDED state upon resume()\n");
-+
-+		cfi_spin_unlock(chip->mutex);
-+	}
-+}
-+
-+static void cfi_sststd_destroy(struct mtd_info *mtd)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	kfree(cfi->cmdset_priv);
-+	kfree(cfi);
-+}
-+
-+#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE)
-+#define cfi_sststd_init init_module
-+#define cfi_sststd_exit cleanup_module
-+#endif
-+
-+static char im_name[]="cfi_cmdset_0701";
-+
-+mod_init_t cfi_sststd_init(void)
-+{
-+	inter_module_register(im_name, THIS_MODULE, &cfi_cmdset_0701);
-+	return 0;
-+}
-+
-+mod_exit_t cfi_sststd_exit(void)
-+{
-+	inter_module_unregister(im_name);
-+}
-+
-+module_init(cfi_sststd_init);
-+module_exit(cfi_sststd_exit);
-+
-diff -Nur linux-2.4.30/drivers/mtd/chips/cfi_probe.c linux-2.4.30.openwrt/drivers/mtd/chips/cfi_probe.c
---- linux-2.4.30/drivers/mtd/chips/cfi_probe.c	2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.30.openwrt/drivers/mtd/chips/cfi_probe.c	2005-06-28 11:26:26.000000000 +0200
-@@ -67,8 +67,15 @@
- 	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
- 	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
- 
--	if (!qry_present(map,base,cfi))
--		return 0;
-+	if (!qry_present(map,base,cfi)) {
-+		/* rather broken SST cfi probe (requires SST unlock) */
-+		cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL);
-+		if (!qry_present(map,base,cfi))
-+			return 0;
-+	}
- 
- 	if (!cfi->numchips) {
- 		/* This is the first time we're called. Set up the CFI 
-diff -Nur linux-2.4.30/drivers/mtd/chips/gen_probe.c linux-2.4.30.openwrt/drivers/mtd/chips/gen_probe.c
---- linux-2.4.30/drivers/mtd/chips/gen_probe.c	2003-08-25 13:44:42.000000000 +0200
-+++ linux-2.4.30.openwrt/drivers/mtd/chips/gen_probe.c	2005-06-28 11:29:23.000000000 +0200
-@@ -328,13 +328,18 @@
- 		return cfi_cmdset_0001(map, primary);
- #endif
- #ifdef CONFIG_MTD_CFI_AMDSTD
-+	case 0x0006:
- 	case 0x0002:
- 		return cfi_cmdset_0002(map, primary);
- #endif
- #ifdef CONFIG_MTD_CFI_STAA
--        case 0x0020:
-+	case 0x0020:
- 		return cfi_cmdset_0020(map, primary);
- #endif
-+#ifdef CONFIG_MTD_CFI_SSTSTD
-+	case 0x0701:
-+		return cfi_cmdset_0701(map, primary);
-+#endif
- 	}
- 
- 	return cfi_cmdset_unknown(map, primary);
diff --git a/openwrt/target/linux/generic-2.4/patches/006-gcc4_fixes.patch b/openwrt/target/linux/generic-2.4/patches/006-gcc4_fixes.patch
deleted file mode 100644
index 4034d1b48b..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/006-gcc4_fixes.patch
+++ /dev/null
@@ -1,522 +0,0 @@
-diff -rupN linux-2.4.32/Makefile linux-2.4.32.gcc4-fixes-v12/Makefile
---- linux-2.4.32/Makefile	2005-11-17 13:27:30.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/Makefile	2005-11-17 13:32:13.000000000 +0100
-@@ -93,11 +93,17 @@ CPPFLAGS := -D__KERNEL__ -I$(HPATH)
- 
- CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
- 	  -fno-strict-aliasing -fno-common
-+CFLAGS += -fno-builtin-sprintf
- ifndef CONFIG_FRAME_POINTER
- CFLAGS += -fomit-frame-pointer
- endif
- AFLAGS := -D__ASSEMBLY__ $(CPPFLAGS)
- 
-+check_gcc = $(shell if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi)
-+
-+# disable pointer signedness warnings in gcc 4.0
-+CFLAGS += $(call check_gcc,-Wno-pointer-sign,)
-+
- #
- # ROOT_DEV specifies the default root-device when making the image.
- # This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
-diff -rupN linux-2.4.32/arch/i386/Makefile linux-2.4.32.gcc4-fixes-v12/arch/i386/Makefile
---- linux-2.4.32/arch/i386/Makefile	2004-11-17 18:36:41.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/arch/i386/Makefile	2005-11-17 13:32:13.000000000 +0100
-@@ -23,8 +23,6 @@ LINKFLAGS =-T $(TOPDIR)/arch/i386/vmlinu
- 
- CFLAGS += -pipe
- 
--check_gcc = $(shell if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi)
--
- # prevent gcc from keeping the stack 16 byte aligned
- CFLAGS += $(call check_gcc,-mpreferred-stack-boundary=2,)
- 
-diff -rupN linux-2.4.32/arch/mips/Makefile linux-2.4.32.gcc4-fixes-v12/arch/mips/Makefile
---- linux-2.4.32/arch/mips/Makefile	2005-01-19 18:00:52.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/arch/mips/Makefile	2005-11-17 13:32:13.000000000 +0100
-@@ -30,8 +30,6 @@ endif
- 
- MAKEBOOT = $(MAKE) -C arch/$(ARCH)/boot
- 
--check_gcc = $(shell if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi)
--
- #
- #
- # GCC uses -G 0 -mabicalls -fpic as default.  We don't want PIC in the kernel
-diff -rupN linux-2.4.32/arch/mips64/Makefile linux-2.4.32.gcc4-fixes-v12/arch/mips64/Makefile
---- linux-2.4.32/arch/mips64/Makefile	2005-01-19 18:00:52.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/arch/mips64/Makefile	2005-11-17 13:32:13.000000000 +0100
-@@ -26,7 +26,6 @@ ifdef CONFIG_CROSSCOMPILE
- CROSS_COMPILE	= $(tool-prefix)
- endif
- 
--check_gcc = $(shell if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi)
- check_gas = $(shell if $(CC) $(1) -Wa,-Z -c -o /dev/null -xassembler /dev/null > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi)
- 
- #
-diff -rupN linux-2.4.32/arch/ppc/kernel/open_pic_defs.h linux-2.4.32.gcc4-fixes-v12/arch/ppc/kernel/open_pic_defs.h
---- linux-2.4.32/arch/ppc/kernel/open_pic_defs.h	2003-06-14 13:30:19.000000000 +0200
-+++ linux-2.4.32.gcc4-fixes-v12/arch/ppc/kernel/open_pic_defs.h	2005-11-17 13:32:13.000000000 +0100
-@@ -172,9 +172,6 @@ struct OpenPIC {
-     OpenPIC_Processor Processor[OPENPIC_MAX_PROCESSORS];
- };
- 
--extern volatile struct OpenPIC *OpenPIC;
--
--
-     /*
-      *  Current Task Priority Register
-      */
-diff -rupN linux-2.4.32/arch/x86_64/Makefile linux-2.4.32.gcc4-fixes-v12/arch/x86_64/Makefile
---- linux-2.4.32/arch/x86_64/Makefile	2004-04-14 20:22:20.000000000 +0200
-+++ linux-2.4.32.gcc4-fixes-v12/arch/x86_64/Makefile	2005-11-17 13:32:13.000000000 +0100
-@@ -38,8 +38,6 @@ OBJCOPY=$(CROSS_COMPILE)objcopy -O binar
- LDFLAGS=-e stext
- LINKFLAGS =-T $(TOPDIR)/arch/x86_64/vmlinux.lds $(LDFLAGS)
- 
--check_gcc = $(shell if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1 ; then echo "$(1)"; else echo "$(2)"; fi)
--
- CFLAGS += -mno-red-zone
- CFLAGS += -mcmodel=kernel
- CFLAGS += -pipe
-diff -rupN linux-2.4.32/arch/x86_64/ia32/ia32entry.S linux-2.4.32.gcc4-fixes-v12/arch/x86_64/ia32/ia32entry.S
---- linux-2.4.32/arch/x86_64/ia32/ia32entry.S	2005-01-19 18:00:53.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/arch/x86_64/ia32/ia32entry.S	2005-11-17 13:32:13.000000000 +0100
-@@ -113,9 +113,18 @@ quiet_ni_syscall:
- 	PTREGSCALL stub32_fork, sys32_fork
- 	PTREGSCALL stub32_clone, sys32_clone
- 	PTREGSCALL stub32_vfork, sys32_vfork
--	PTREGSCALL stub32_iopl, sys_iopl
- 	PTREGSCALL stub32_rt_sigsuspend, sys_rt_sigsuspend
- 
-+	.macro PTREGSCALL3 label, func, arg
-+	.globl \label
-+\label:
-+	leaq \func(%rip),%rax
-+	leaq -ARGOFFSET+8(%rsp),\arg	/* 8 for return address */
-+	jmp  ia32_ptregs_common	
-+	.endm
-+
-+	PTREGSCALL3 stub32_iopl, sys_iopl, %rsi
-+
- ENTRY(ia32_ptregs_common)
- 	popq %r11
- 	SAVE_REST
-diff -rupN linux-2.4.32/arch/x86_64/kernel/entry.S linux-2.4.32.gcc4-fixes-v12/arch/x86_64/kernel/entry.S
---- linux-2.4.32/arch/x86_64/kernel/entry.S	2003-11-29 00:28:11.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/arch/x86_64/kernel/entry.S	2005-11-17 13:32:13.000000000 +0100
-@@ -249,7 +249,16 @@ intret_signal_test:		
- 	PTREGSCALL stub_vfork, sys_vfork
- 	PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend
- 	PTREGSCALL stub_sigaltstack, sys_sigaltstack
--	PTREGSCALL stub_iopl, sys_iopl
-+
-+	.macro PTREGSCALL3 label,func,arg
-+	.globl \label
-+\label:
-+	leaq	\func(%rip),%rax
-+	leaq    -ARGOFFSET+8(%rsp),\arg /* 8 for return address */
-+	jmp	ptregscall_common
-+	.endm
-+
-+	PTREGSCALL3 stub_iopl, sys_iopl, %rsi
- 
- ENTRY(ptregscall_common)
- 	popq %r11
-diff -rupN linux-2.4.32/arch/x86_64/kernel/ioport.c linux-2.4.32.gcc4-fixes-v12/arch/x86_64/kernel/ioport.c
---- linux-2.4.32/arch/x86_64/kernel/ioport.c	2003-11-29 00:28:11.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/arch/x86_64/kernel/ioport.c	2005-11-17 13:32:13.000000000 +0100
-@@ -81,9 +81,9 @@ asmlinkage long sys_ioperm(unsigned long
-  * code.
-  */
- 
--asmlinkage long sys_iopl(unsigned int level, struct pt_regs regs)
-+asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs)
- {
--	unsigned int old = (regs.eflags >> 12) & 3;
-+	unsigned int old = (regs->eflags >> 12) & 3;
- 
- 	if (level > 3)
- 		return -EINVAL;
-@@ -92,6 +92,6 @@ asmlinkage long sys_iopl(unsigned int le
- 		if (!capable(CAP_SYS_RAWIO))
- 			return -EPERM;
- 	}
--	regs.eflags = (regs.eflags & 0xffffffffffffcfff) | (level << 12);
-+	regs->eflags = (regs->eflags &~ 0x3000UL) | (level << 12);
- 	return 0;
- }
-diff -rupN linux-2.4.32/drivers/acpi/bus.c linux-2.4.32.gcc4-fixes-v12/drivers/acpi/bus.c
---- linux-2.4.32/drivers/acpi/bus.c	2005-01-19 18:00:53.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/drivers/acpi/bus.c	2005-11-17 13:32:13.000000000 +0100
-@@ -623,7 +623,7 @@ acpi_bus_generate_event (
- 	int			data)
- {
- 	struct acpi_bus_event	*event = NULL;
--	u32			flags = 0;
-+	unsigned long		flags = 0;
- 
- 	ACPI_FUNCTION_TRACE("acpi_bus_generate_event");
- 
-@@ -656,7 +656,7 @@ int
- acpi_bus_receive_event (
- 	struct acpi_bus_event	*event)
- {
--	u32			flags = 0;
-+	unsigned long		flags = 0;
- 	struct acpi_bus_event	*entry = NULL;
- 
- 	DECLARE_WAITQUEUE(wait, current);
-diff -rupN linux-2.4.32/drivers/sound/sound_firmware.c linux-2.4.32.gcc4-fixes-v12/drivers/sound/sound_firmware.c
---- linux-2.4.32/drivers/sound/sound_firmware.c	2001-02-22 15:23:46.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/drivers/sound/sound_firmware.c	2005-11-17 13:32:13.000000000 +0100
-@@ -4,10 +4,11 @@
- #include <linux/fs.h>
- #include <linux/mm.h>
- #include <linux/slab.h>
--#include <linux/unistd.h>
-+static int my_errno;
-+#define errno my_errno
-+#include <asm/unistd.h>
- #include <asm/uaccess.h>
- 
--static int errno;
- static int do_mod_firmware_load(const char *fn, char **fp)
- {
- 	int fd;
-diff -rupN linux-2.4.32/drivers/usb/host/ehci-q.c linux-2.4.32.gcc4-fixes-v12/drivers/usb/host/ehci-q.c
---- linux-2.4.32/drivers/usb/host/ehci-q.c	2005-01-19 18:00:53.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/drivers/usb/host/ehci-q.c	2005-11-17 13:32:13.000000000 +0100
-@@ -199,8 +199,6 @@ ehci_urb_done (struct ehci_hcd *ehci, st
- #ifdef	INTR_AUTOMAGIC
- 	struct urb		*resubmit = 0;
- 	struct usb_device	*dev = 0;
--
--	static int ehci_urb_enqueue (struct usb_hcd *, struct urb *, int);
- #endif
- 
- 	if (likely (urb->hcpriv != 0)) {
-diff -rupN linux-2.4.32/drivers/usb/inode.c linux-2.4.32.gcc4-fixes-v12/drivers/usb/inode.c
---- linux-2.4.32/drivers/usb/inode.c	2004-02-18 15:16:23.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/drivers/usb/inode.c	2005-11-17 13:32:13.000000000 +0100
-@@ -41,6 +41,9 @@
- #include <linux/usbdevice_fs.h>
- #include <asm/uaccess.h>
- 
-+static struct inode_operations usbdevfs_bus_inode_operations;
-+static struct file_operations usbdevfs_bus_file_operations;
-+
- /* --------------------------------------------------------------------- */
- 
- /*
-diff -rupN linux-2.4.32/fs/hfs/trans.c linux-2.4.32.gcc4-fixes-v12/fs/hfs/trans.c
---- linux-2.4.32/fs/hfs/trans.c	2001-02-22 15:23:47.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/fs/hfs/trans.c	2005-11-17 13:32:13.000000000 +0100
-@@ -33,6 +33,7 @@
- #include <linux/hfs_fs_sb.h>
- #include <linux/hfs_fs_i.h>
- #include <linux/hfs_fs.h>
-+#include <linux/compiler.h>
- 
- /*================ File-local variables ================*/
- 
-@@ -78,7 +79,7 @@ static unsigned char mac2latin_map[128] 
-  *
-  * Given a hexadecimal digit in ASCII, return the integer representation.
-  */
--static inline const unsigned char dehex(char c) {
-+static inline __attribute_const__ unsigned char dehex(char c) {
- 	if ((c>='0')&&(c<='9')) {
- 		return c-'0';
- 	}
-diff -rupN linux-2.4.32/include/asm-i386/byteorder.h linux-2.4.32.gcc4-fixes-v12/include/asm-i386/byteorder.h
---- linux-2.4.32/include/asm-i386/byteorder.h	2003-06-14 13:30:27.000000000 +0200
-+++ linux-2.4.32.gcc4-fixes-v12/include/asm-i386/byteorder.h	2005-11-17 13:32:13.000000000 +0100
-@@ -2,6 +2,7 @@
- #define _I386_BYTEORDER_H
- 
- #include <asm/types.h>
-+#include <linux/compiler.h>
- 
- #ifdef __GNUC__
- 
-@@ -10,7 +11,7 @@
- #include <linux/config.h>
- #endif
- 
--static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
-+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
- {
- #ifdef CONFIG_X86_BSWAP
- 	__asm__("bswap %0" : "=r" (x) : "0" (x));
-@@ -26,7 +27,7 @@ static __inline__ __const__ __u32 ___arc
- 
- /* gcc should generate this for open coded C now too. May be worth switching to 
-    it because inline assembly cannot be scheduled. -AK */
--static __inline__ __const__ __u16 ___arch__swab16(__u16 x)
-+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
- {
- 	__asm__("xchgb %b0,%h0"		/* swap bytes		*/
- 		: "=q" (x)
-diff -rupN linux-2.4.32/include/asm-i386/processor.h linux-2.4.32.gcc4-fixes-v12/include/asm-i386/processor.h
---- linux-2.4.32/include/asm-i386/processor.h	2004-02-18 15:16:24.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/include/asm-i386/processor.h	2005-11-17 13:32:13.000000000 +0100
-@@ -72,7 +72,6 @@ struct cpuinfo_x86 {
-  */
- 
- extern struct cpuinfo_x86 boot_cpu_data;
--extern struct tss_struct init_tss[NR_CPUS];
- 
- #ifdef CONFIG_SMP
- extern struct cpuinfo_x86 cpu_data[];
-@@ -357,6 +356,8 @@ struct tss_struct {
- 	unsigned long __cacheline_filler[5];
- };
- 
-+extern struct tss_struct init_tss[NR_CPUS];
-+
- struct thread_struct {
- 	unsigned long	esp0;
- 	unsigned long	eip;
-diff -rupN linux-2.4.32/include/asm-i386/string.h linux-2.4.32.gcc4-fixes-v12/include/asm-i386/string.h
---- linux-2.4.32/include/asm-i386/string.h	2001-08-12 11:35:53.000000000 +0200
-+++ linux-2.4.32.gcc4-fixes-v12/include/asm-i386/string.h	2005-11-17 13:32:13.000000000 +0100
-@@ -337,7 +337,7 @@ extern void __struct_cpy_bug (void);
- #define struct_cpy(x,y) 			\
- ({						\
- 	if (sizeof(*(x)) != sizeof(*(y))) 	\
--		__struct_cpy_bug;		\
-+		__struct_cpy_bug();		\
- 	memcpy(x, y, sizeof(*(x)));		\
- })
- 
-diff -rupN linux-2.4.32/include/asm-m68k/setup.h linux-2.4.32.gcc4-fixes-v12/include/asm-m68k/setup.h
---- linux-2.4.32/include/asm-m68k/setup.h	2000-01-29 13:07:40.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/include/asm-m68k/setup.h	2005-11-17 13:32:13.000000000 +0100
-@@ -361,12 +361,13 @@ extern int m68k_is040or060;
- #ifndef __ASSEMBLY__
- extern int m68k_num_memory;		/* # of memory blocks found (and used) */
- extern int m68k_realnum_memory;		/* real # of memory blocks found */
--extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
- 
- struct mem_info {
- 	unsigned long addr;		/* physical address of memory chunk */
- 	unsigned long size;		/* length of memory chunk (in bytes) */
- };
-+
-+extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
- #endif
- 
- #endif /* __KERNEL__ */
-diff -rupN linux-2.4.32/include/asm-ppc/byteorder.h linux-2.4.32.gcc4-fixes-v12/include/asm-ppc/byteorder.h
---- linux-2.4.32/include/asm-ppc/byteorder.h	2003-06-14 13:30:28.000000000 +0200
-+++ linux-2.4.32.gcc4-fixes-v12/include/asm-ppc/byteorder.h	2005-11-17 13:32:13.000000000 +0100
-@@ -2,6 +2,7 @@
- #define _PPC_BYTEORDER_H
- 
- #include <asm/types.h>
-+#include <linux/compiler.h>
- 
- #ifdef __GNUC__
- #ifdef __KERNEL__
-@@ -50,7 +51,7 @@ extern __inline__ void st_le64(volatile 
- 	__asm__ __volatile__ ("stwbrx  %1,0,%2" : "=m" (*addr) : "r" (val), "r" (taddr+4));
- }
- 
--static __inline__ __const__ __u16 ___arch__swab16(__u16 value)
-+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value)
- {
- 	__u16 result;
- 
-@@ -58,7 +59,7 @@ static __inline__ __const__ __u16 ___arc
- 	return result;
- }
- 
--static __inline__ __const__ __u32 ___arch__swab32(__u32 value)
-+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value)
- {
- 	__u32 result;
- 
-diff -rupN linux-2.4.32/include/asm-ppc/time.h linux-2.4.32.gcc4-fixes-v12/include/asm-ppc/time.h
---- linux-2.4.32/include/asm-ppc/time.h	2003-08-25 20:07:49.000000000 +0200
-+++ linux-2.4.32.gcc4-fixes-v12/include/asm-ppc/time.h	2005-11-17 13:32:13.000000000 +0100
-@@ -12,6 +12,7 @@
- #include <linux/config.h>
- #include <linux/mc146818rtc.h>
- #include <linux/threads.h>
-+#include <linux/compiler.h>
- 
- #include <asm/processor.h>
- 
-@@ -57,7 +58,7 @@ static __inline__ void set_dec(unsigned 
- /* Accessor functions for the timebase (RTC on 601) registers. */
- /* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
- #ifdef CONFIG_6xx
--extern __inline__ int const __USE_RTC(void) {
-+extern __inline__ int __attribute_const__ __USE_RTC(void) {
- 	return (mfspr(SPRN_PVR)>>16) == 1;
- }
- #else
-diff -rupN linux-2.4.32/include/asm-x86_64/byteorder.h linux-2.4.32.gcc4-fixes-v12/include/asm-x86_64/byteorder.h
---- linux-2.4.32/include/asm-x86_64/byteorder.h	2002-11-30 17:12:31.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/include/asm-x86_64/byteorder.h	2005-11-17 13:32:13.000000000 +0100
-@@ -2,16 +2,17 @@
- #define _X86_64_BYTEORDER_H
- 
- #include <asm/types.h>
-+#include <linux/compiler.h>
- 
- #ifdef __GNUC__
- 
--static __inline__ __const__ __u64 ___arch__swab64(__u64 x)
-+static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
- {
- 	__asm__("bswapq %0" : "=r" (x) : "0" (x));
- 	return x;
- }
- 
--static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
-+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
- {
- 	__asm__("bswapl %0" : "=r" (x) : "0" (x));
- 	return x;
-diff -rupN linux-2.4.32/include/asm-x86_64/processor.h linux-2.4.32.gcc4-fixes-v12/include/asm-x86_64/processor.h
---- linux-2.4.32/include/asm-x86_64/processor.h	2005-11-17 13:27:30.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/include/asm-x86_64/processor.h	2005-11-17 13:32:13.000000000 +0100
-@@ -68,7 +68,6 @@ struct cpuinfo_x86 {
- #define X86_VENDOR_UNKNOWN 0xff
- 
- extern struct cpuinfo_x86 boot_cpu_data;
--extern struct tss_struct init_tss[NR_CPUS];
- 
- #ifdef CONFIG_SMP
- extern struct cpuinfo_x86 cpu_data[];
-@@ -300,6 +299,8 @@ struct tss_struct {
- 	u32 io_bitmap[IO_BITMAP_SIZE];
- } __attribute__((packed)) ____cacheline_aligned;
- 
-+extern struct tss_struct init_tss[NR_CPUS];
-+
- struct thread_struct {
- 	unsigned long	rsp0;
- 	unsigned long	rip;
-diff -rupN linux-2.4.32/include/linux/byteorder/swab.h linux-2.4.32.gcc4-fixes-v12/include/linux/byteorder/swab.h
---- linux-2.4.32/include/linux/byteorder/swab.h	2002-11-30 17:12:31.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/include/linux/byteorder/swab.h	2005-11-17 13:32:13.000000000 +0100
-@@ -15,6 +15,8 @@
-  *
-  */
- 
-+#include <linux/compiler.h>
-+
- /* casts are necessary for constants, because we never know how for sure
-  * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
-  */
-@@ -156,7 +158,7 @@
- #endif /* OPTIMIZE */
- 
- 
--static __inline__ __const__ __u16 __fswab16(__u16 x)
-+static __inline__ __attribute_const__ __u16 __fswab16(__u16 x)
- {
- 	return __arch__swab16(x);
- }
-@@ -169,7 +171,7 @@ static __inline__ void __swab16s(__u16 *
- 	__arch__swab16s(addr);
- }
- 
--static __inline__ __const__ __u32 __fswab24(__u32 x)
-+static __inline__ __attribute_const__ __u32 __fswab24(__u32 x)
- {
- 	return __arch__swab24(x);
- }
-@@ -182,7 +184,7 @@ static __inline__ void __swab24s(__u32 *
- 	__arch__swab24s(addr);
- }
- 
--static __inline__ __const__ __u32 __fswab32(__u32 x)
-+static __inline__ __attribute_const__ __u32 __fswab32(__u32 x)
- {
- 	return __arch__swab32(x);
- }
-@@ -196,7 +198,7 @@ static __inline__ void __swab32s(__u32 *
- }
- 
- #ifdef __BYTEORDER_HAS_U64__
--static __inline__ __const__ __u64 __fswab64(__u64 x)
-+static __inline__ __attribute_const__ __u64 __fswab64(__u64 x)
- {
- #  ifdef __SWAB_64_THRU_32__
- 	__u32 h = x >> 32;
-diff -rupN linux-2.4.32/include/linux/compiler.h linux-2.4.32.gcc4-fixes-v12/include/linux/compiler.h
---- linux-2.4.32/include/linux/compiler.h	2004-11-17 18:36:42.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/include/linux/compiler.h	2005-11-17 13:32:13.000000000 +0100
-@@ -27,6 +27,12 @@
- #define __attribute_used__	/* not implemented */
- #endif /* __GNUC__ */
- 
-+#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 96)
-+#define __attribute_const__	__attribute__((__const__))
-+#else
-+#define __attribute_const__	/* unimplemented */
-+#endif
-+
- #if __GNUC__ == 3
- #if __GNUC_MINOR__ >= 1
- # define inline         __inline__ __attribute__((always_inline))
-diff -rupN linux-2.4.32/include/linux/fs.h linux-2.4.32.gcc4-fixes-v12/include/linux/fs.h
---- linux-2.4.32/include/linux/fs.h	2005-04-04 19:56:05.000000000 +0200
-+++ linux-2.4.32.gcc4-fixes-v12/include/linux/fs.h	2005-11-17 13:32:13.000000000 +0100
-@@ -1559,7 +1559,6 @@ static inline int is_mounted(kdev_t dev)
- unsigned long generate_cluster(kdev_t, int b[], int);
- unsigned long generate_cluster_swab32(kdev_t, int b[], int);
- extern kdev_t ROOT_DEV;
--extern char root_device_name[];
- 
- 
- extern void show_buffers(void);
-diff -rupN linux-2.4.32/include/linux/ufs_fs.h linux-2.4.32.gcc4-fixes-v12/include/linux/ufs_fs.h
---- linux-2.4.32/include/linux/ufs_fs.h	2001-11-23 22:40:15.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/include/linux/ufs_fs.h	2005-11-17 13:32:13.000000000 +0100
-@@ -555,7 +555,6 @@ extern struct buffer_head * ufs_bread (s
- extern struct file_operations ufs_dir_operations;
-         
- /* super.c */
--extern struct file_system_type ufs_fs_type;
- extern void ufs_warning (struct super_block *, const char *, const char *, ...) __attribute__ ((format (printf, 3, 4)));
- extern void ufs_error (struct super_block *, const char *, const char *, ...) __attribute__ ((format (printf, 3, 4)));
- extern void ufs_panic (struct super_block *, const char *, const char *, ...) __attribute__ ((format (printf, 3, 4)));
-diff -rupN linux-2.4.32/include/linux/usbdevice_fs.h linux-2.4.32.gcc4-fixes-v12/include/linux/usbdevice_fs.h
---- linux-2.4.32/include/linux/usbdevice_fs.h	2003-11-29 00:28:14.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/include/linux/usbdevice_fs.h	2005-11-17 13:32:13.000000000 +0100
-@@ -185,8 +185,6 @@ extern struct file_operations usbdevfs_d
- extern struct file_operations usbdevfs_devices_fops;
- extern struct file_operations usbdevfs_device_file_operations;
- extern struct inode_operations usbdevfs_device_inode_operations;
--extern struct inode_operations usbdevfs_bus_inode_operations;
--extern struct file_operations usbdevfs_bus_file_operations;
- extern void usbdevfs_conn_disc_event(void);
- 
- #endif /* __KERNEL__ */
-diff -rupN linux-2.4.32/include/net/icmp.h linux-2.4.32.gcc4-fixes-v12/include/net/icmp.h
---- linux-2.4.32/include/net/icmp.h	2001-04-28 12:35:26.000000000 +0200
-+++ linux-2.4.32.gcc4-fixes-v12/include/net/icmp.h	2005-11-17 13:32:13.000000000 +0100
-@@ -23,6 +23,7 @@
- 
- #include <net/sock.h>
- #include <net/protocol.h>
-+#include <net/snmp.h>
- 
- struct icmp_err {
-   int		errno;
-diff -rupN linux-2.4.32/include/net/ipv6.h linux-2.4.32.gcc4-fixes-v12/include/net/ipv6.h
---- linux-2.4.32/include/net/ipv6.h	2004-11-17 18:36:43.000000000 +0100
-+++ linux-2.4.32.gcc4-fixes-v12/include/net/ipv6.h	2005-11-17 13:32:13.000000000 +0100
-@@ -101,6 +101,7 @@ struct frag_hdr {
- #ifdef __KERNEL__
- 
- #include <net/sock.h>
-+#include <net/snmp.h>
- 
- /* sysctls */
- extern int sysctl_ipv6_bindv6only;
diff --git a/openwrt/target/linux/generic-2.4/patches/007-more_gcc4_fixes.patch b/openwrt/target/linux/generic-2.4/patches/007-more_gcc4_fixes.patch
deleted file mode 100644
index b234c7028c..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/007-more_gcc4_fixes.patch
+++ /dev/null
@@ -1,1339 +0,0 @@
-diff -rupN linux-2.4.32/drivers/atm/fore200e.c linux-2.4.32.more-gcc4-fixes-v1/drivers/atm/fore200e.c
---- linux-2.4.32/drivers/atm/fore200e.c	2004-11-17 18:36:41.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/atm/fore200e.c	2005-11-17 13:31:16.000000000 +0100
-@@ -112,8 +112,8 @@
- #endif
- 
- 
--extern const struct atmdev_ops   fore200e_ops;
--extern const struct fore200e_bus fore200e_bus[];
-+static const struct atmdev_ops   fore200e_ops;
-+static const struct fore200e_bus fore200e_bus[];
- 
- static struct fore200e* fore200e_boards = NULL;
- 
-diff -rupN linux-2.4.32/drivers/atm/horizon.c linux-2.4.32.more-gcc4-fixes-v1/drivers/atm/horizon.c
---- linux-2.4.32/drivers/atm/horizon.c	2004-02-18 15:16:22.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/atm/horizon.c	2005-11-17 13:31:16.000000000 +0100
-@@ -481,6 +481,7 @@ static inline void dump_skb (char * pref
-   return;
- }
- 
-+#if 0 /* unused and in conflict with <asm-ppc/system.h> */
- static inline void dump_regs (hrz_dev * dev) {
- #ifdef DEBUG_HORIZON
-   PRINTD (DBG_REGS, "CONTROL 0: %#x", rd_regl (dev, CONTROL_0_REG));
-@@ -494,6 +495,7 @@ static inline void dump_regs (hrz_dev * 
- #endif
-   return;
- }
-+#endif
- 
- static inline void dump_framer (hrz_dev * dev) {
- #ifdef DEBUG_HORIZON
-diff -rupN linux-2.4.32/drivers/atm/iphase.c linux-2.4.32.more-gcc4-fixes-v1/drivers/atm/iphase.c
---- linux-2.4.32/drivers/atm/iphase.c	2004-11-17 18:36:41.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/atm/iphase.c	2005-11-17 13:31:16.000000000 +0100
-@@ -82,6 +82,7 @@ static IADEV *ia_dev[8];
- static struct atm_dev *_ia_dev[8];
- static int iadev_count;
- static void ia_led_timer(unsigned long arg);
-+static int ia_pkt_tx (struct atm_vcc *vcc, struct sk_buff *skb);
- static struct timer_list ia_timer = { function: ia_led_timer };
- struct atm_vcc *vcc_close_que[100];
- static int IA_TX_BUF = DFL_TX_BUFFERS, IA_TX_BUF_SZ = DFL_TX_BUF_SZ;
-@@ -627,7 +628,6 @@ static int ia_que_tx (IADEV *iadev) { 
-    int num_desc;
-    struct atm_vcc *vcc;
-    struct ia_vcc *iavcc;
--   static int ia_pkt_tx (struct atm_vcc *vcc, struct sk_buff *skb);
-    num_desc = ia_avail_descs(iadev);
-    while (num_desc && (skb = skb_dequeue(&iadev->tx_backlog))) {
-       if (!(vcc = ATM_SKB(skb)->vcc)) {
-diff -rupN linux-2.4.32/drivers/atm/iphase.h linux-2.4.32.more-gcc4-fixes-v1/drivers/atm/iphase.h
---- linux-2.4.32/drivers/atm/iphase.h	2003-06-14 13:30:20.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/atm/iphase.h	2005-11-17 13:31:16.000000000 +0100
-@@ -68,8 +68,6 @@
- #define IF_IADBG_SUNI_STAT      0x02000000        // suni statistics
- #define IF_IADBG_RESET          0x04000000        
- 
--extern	unsigned int	IADebugFlag;
--
- #define IF_IADBG(f) if (IADebugFlag & (f))
- 
- #ifdef  CONFIG_ATM_IA_DEBUG   /* Debug build */
-diff -rupN linux-2.4.32/drivers/block/nbd.c linux-2.4.32.more-gcc4-fixes-v1/drivers/block/nbd.c
---- linux-2.4.32/drivers/block/nbd.c	2005-04-04 19:56:04.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/block/nbd.c	2005-11-17 13:31:16.000000000 +0100
-@@ -74,6 +74,29 @@ static int requests_in;
- static int requests_out;
- #endif
- 
-+static void
-+nbd_end_request(struct request *req)
-+{
-+	struct buffer_head *bh;
-+	unsigned nsect;
-+	unsigned long flags;
-+	int uptodate = (req->errors == 0) ? 1 : 0;
-+
-+#ifdef PARANOIA
-+	requests_out++;
-+#endif
-+	spin_lock_irqsave(&io_request_lock, flags);
-+	while((bh = req->bh) != NULL) {
-+		nsect = bh->b_size >> 9;
-+		blk_finished_io(nsect);
-+		req->bh = bh->b_reqnext;
-+		bh->b_reqnext = NULL;
-+		bh->b_end_io(bh, uptodate);
-+	}
-+	blkdev_release_request(req);
-+	spin_unlock_irqrestore(&io_request_lock, flags);
-+}
-+
- static int nbd_open(struct inode *inode, struct file *file)
- {
- 	int dev;
-diff -rupN linux-2.4.32/drivers/block/paride/pd.c linux-2.4.32.more-gcc4-fixes-v1/drivers/block/paride/pd.c
---- linux-2.4.32/drivers/block/paride/pd.c	2002-11-30 17:12:24.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/block/paride/pd.c	2005-11-17 13:31:16.000000000 +0100
-@@ -343,7 +343,14 @@ static char *pd_errs[17] = { "ERR","INDE
- 
- /* kernel glue structures */
- 
--extern struct block_device_operations pd_fops;
-+static struct block_device_operations pd_fops = {
-+	owner:			THIS_MODULE,
-+        open:			pd_open,
-+        release:		pd_release,
-+        ioctl:			pd_ioctl,
-+        check_media_change:	pd_check_media,
-+        revalidate:		pd_revalidate
-+};
- 
- static struct gendisk pd_gendisk = {
- 	major:		PD_MAJOR,
-@@ -355,15 +362,6 @@ static struct gendisk pd_gendisk = {
- 	fops:		&pd_fops,
- };
- 
--static struct block_device_operations pd_fops = {
--	owner:			THIS_MODULE,
--        open:			pd_open,
--        release:		pd_release,
--        ioctl:			pd_ioctl,
--        check_media_change:	pd_check_media,
--        revalidate:		pd_revalidate
--};
--
- void pd_init_units( void )
- 
- {	int	unit, j;
-diff -rupN linux-2.4.32/drivers/block/xd.c linux-2.4.32.more-gcc4-fixes-v1/drivers/block/xd.c
---- linux-2.4.32/drivers/block/xd.c	2002-11-30 17:12:24.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/block/xd.c	2005-11-17 13:31:16.000000000 +0100
-@@ -125,7 +125,12 @@ static int xd_sizes[XD_MAXDRIVES << 6], 
- static int xd_blocksizes[XD_MAXDRIVES << 6];
- static int xd_maxsect[XD_MAXDRIVES << 6];
- 
--extern struct block_device_operations xd_fops;
-+static struct block_device_operations xd_fops = {
-+	owner:		THIS_MODULE,
-+	open:		xd_open,
-+	release:	xd_release,
-+	ioctl:		xd_ioctl,
-+};
- 
- static struct gendisk xd_gendisk = {
- 	major:		MAJOR_NR,
-@@ -138,13 +143,6 @@ static struct gendisk xd_gendisk = {
- 	fops:		&xd_fops,
- };
- 
--static struct block_device_operations xd_fops = {
--	owner:		THIS_MODULE,
--	open:		xd_open,
--	release:	xd_release,
--	ioctl:		xd_ioctl,
--};
--
- static DECLARE_WAIT_QUEUE_HEAD(xd_wait_int);
- static DECLARE_WAIT_QUEUE_HEAD(xd_wait_open);
- static u8 xd_valid[XD_MAXDRIVES] = { 0,0 };
-diff -rupN linux-2.4.32/drivers/cdrom/sbpcd.c linux-2.4.32.more-gcc4-fixes-v1/drivers/cdrom/sbpcd.c
---- linux-2.4.32/drivers/cdrom/sbpcd.c	2001-11-06 12:12:06.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/cdrom/sbpcd.c	2005-11-17 13:31:16.000000000 +0100
-@@ -525,6 +525,8 @@ static int sbp_data(struct request *req)
- static int cmd_out(void);
- static int DiskInfo(void);
- static int sbpcd_chk_disk_change(kdev_t);
-+static int cmd_out_T(void);
-+static int cc_DriveReset(void);
- 
- /*==========================================================================*/
- 
-@@ -1213,8 +1215,6 @@ static int get_state_T(void)
- {
- 	int i;
- 	
--	static int cmd_out_T(void);
--
- 	clr_cmdbuf();
- 	D_S[d].n_bytes=1;
- 	drvcmd[0]=CMDT_STATUS;
-@@ -1362,7 +1362,6 @@ static int cmd_out_T(void)
- #define CMDT_TRIES 1000
- #define TEST_FALSE_FF 1
- 	
--	static int cc_DriveReset(void);
- 	int i, j, l=0, m, ntries;
- 	long flags;
- 
-diff -rupN linux-2.4.32/drivers/char/ip2/i2lib.c linux-2.4.32.more-gcc4-fixes-v1/drivers/char/ip2/i2lib.c
---- linux-2.4.32/drivers/char/ip2/i2lib.c	2005-01-19 18:00:53.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/char/ip2/i2lib.c	2005-11-17 13:31:16.000000000 +0100
-@@ -1262,7 +1262,7 @@ i2RetryFlushOutput(i2ChanStrPtr pCh)
- 
- 	}
- 	if ( old_flags & STOPFL_FLAG ) {
--		if ( 1 == i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL) > 0 ) {
-+		if ( 1 == i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL)) {
- 			old_flags = 0;	// Success - clear flags
- 		}
- 
-diff -rupN linux-2.4.32/drivers/char/rio/rio_linux.c linux-2.4.32.more-gcc4-fixes-v1/drivers/char/rio/rio_linux.c
---- linux-2.4.32/drivers/char/rio/rio_linux.c	2002-02-26 13:26:56.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/char/rio/rio_linux.c	2005-11-17 13:31:16.000000000 +0100
-@@ -1205,8 +1205,8 @@ static int __init rio_init(void) 
-       hp->Ivec = get_irq (pdev);
-       if (((1 << hp->Ivec) & rio_irqmask) == 0)
-               hp->Ivec = 0;
--      hp->CardP	= (struct DpRam *)
-       hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN);
-+      hp->CardP	= (struct DpRam *) hp->Caddr;
-       hp->Type  = RIO_PCI;
-       hp->Copy  = rio_pcicopy; 
-       hp->Mode  = RIO_PCI_BOOT_FROM_RAM;
-@@ -1277,8 +1277,8 @@ static int __init rio_init(void) 
-       if (((1 << hp->Ivec) & rio_irqmask) == 0) 
-       	hp->Ivec = 0;
-       hp->Ivec |= 0x8000; /* Mark as non-sharable */
--      hp->CardP	= (struct DpRam *)
-       hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN);
-+      hp->CardP	= (struct DpRam *) hp->Caddr;
-       hp->Type  = RIO_PCI;
-       hp->Copy  = rio_pcicopy;
-       hp->Mode  = RIO_PCI_BOOT_FROM_RAM;
-@@ -1329,8 +1329,8 @@ static int __init rio_init(void) 
-     hp->PaddrP = rio_probe_addrs[i];
-     /* There was something about the IRQs of these cards. 'Forget what.--REW */
-     hp->Ivec = 0;
--    hp->CardP = (struct DpRam *)
-     hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN);
-+    hp->CardP = (struct DpRam *) hp->Caddr;
-     hp->Type = RIO_AT;
-     hp->Copy = rio_pcicopy; /* AT card PCI???? - PVDL
-                              * -- YES! this is now a normal copy. Only the 
-diff -rupN linux-2.4.32/drivers/char/sonypi.c linux-2.4.32.more-gcc4-fixes-v1/drivers/char/sonypi.c
---- linux-2.4.32/drivers/char/sonypi.c	2004-04-14 20:22:20.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/char/sonypi.c	2005-11-17 13:31:16.000000000 +0100
-@@ -60,6 +60,35 @@ static int compat; /* = 0 */
- static int useinput = 1;
- static unsigned long mask = 0xffffffff;
- 
-+static inline int sonypi_ec_write(u8 addr, u8 value) {
-+#ifdef CONFIG_ACPI_EC
-+	if (SONYPI_ACPI_ACTIVE)
-+		return ec_write(addr, value);
-+#endif
-+	wait_on_command(1, inb_p(SONYPI_CST_IOPORT) & 3, ITERATIONS_LONG);
-+	outb_p(0x81, SONYPI_CST_IOPORT);
-+	wait_on_command(0, inb_p(SONYPI_CST_IOPORT) & 2, ITERATIONS_LONG);
-+	outb_p(addr, SONYPI_DATA_IOPORT);
-+	wait_on_command(0, inb_p(SONYPI_CST_IOPORT) & 2, ITERATIONS_LONG);
-+	outb_p(value, SONYPI_DATA_IOPORT);
-+	wait_on_command(0, inb_p(SONYPI_CST_IOPORT) & 2, ITERATIONS_LONG);
-+	return 0;
-+}
-+
-+static inline int sonypi_ec_read(u8 addr, u8 *value) {
-+#ifdef CONFIG_ACPI_EC
-+	if (SONYPI_ACPI_ACTIVE)
-+		return ec_read(addr, value);
-+#endif
-+	wait_on_command(1, inb_p(SONYPI_CST_IOPORT) & 3, ITERATIONS_LONG);
-+	outb_p(0x80, SONYPI_CST_IOPORT);
-+	wait_on_command(0, inb_p(SONYPI_CST_IOPORT) & 2, ITERATIONS_LONG);
-+	outb_p(addr, SONYPI_DATA_IOPORT);
-+	wait_on_command(0, inb_p(SONYPI_CST_IOPORT) & 2, ITERATIONS_LONG);
-+	*value = inb_p(SONYPI_DATA_IOPORT);
-+	return 0;
-+}
-+
- /* Inits the queue */
- static inline void sonypi_initq(void) {
-         sonypi_device.queue.head = sonypi_device.queue.tail = 0;
-diff -rupN linux-2.4.32/drivers/char/sonypi.h linux-2.4.32.more-gcc4-fixes-v1/drivers/char/sonypi.h
---- linux-2.4.32/drivers/char/sonypi.h	2004-04-14 20:22:20.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/char/sonypi.h	2005-11-17 13:31:16.000000000 +0100
-@@ -401,37 +401,6 @@ struct sonypi_device {
- #define SONYPI_ACPI_ACTIVE 0
- #endif /* CONFIG_ACPI */
- 
--extern int verbose;
--
--static inline int sonypi_ec_write(u8 addr, u8 value) {
--#ifdef CONFIG_ACPI_EC
--	if (SONYPI_ACPI_ACTIVE)
--		return ec_write(addr, value);
--#endif
--	wait_on_command(1, inb_p(SONYPI_CST_IOPORT) & 3, ITERATIONS_LONG);
--	outb_p(0x81, SONYPI_CST_IOPORT);
--	wait_on_command(0, inb_p(SONYPI_CST_IOPORT) & 2, ITERATIONS_LONG);
--	outb_p(addr, SONYPI_DATA_IOPORT);
--	wait_on_command(0, inb_p(SONYPI_CST_IOPORT) & 2, ITERATIONS_LONG);
--	outb_p(value, SONYPI_DATA_IOPORT);
--	wait_on_command(0, inb_p(SONYPI_CST_IOPORT) & 2, ITERATIONS_LONG);
--	return 0;
--}
--
--static inline int sonypi_ec_read(u8 addr, u8 *value) {
--#ifdef CONFIG_ACPI_EC
--	if (SONYPI_ACPI_ACTIVE)
--		return ec_read(addr, value);
--#endif
--	wait_on_command(1, inb_p(SONYPI_CST_IOPORT) & 3, ITERATIONS_LONG);
--	outb_p(0x80, SONYPI_CST_IOPORT);
--	wait_on_command(0, inb_p(SONYPI_CST_IOPORT) & 2, ITERATIONS_LONG);
--	outb_p(addr, SONYPI_DATA_IOPORT);
--	wait_on_command(0, inb_p(SONYPI_CST_IOPORT) & 2, ITERATIONS_LONG);
--	*value = inb_p(SONYPI_DATA_IOPORT);
--	return 0;
--}
--
- #endif /* __KERNEL__ */
- 
- #endif /* _SONYPI_PRIV_H_ */
-diff -rupN linux-2.4.32/drivers/char/sx.c linux-2.4.32.more-gcc4-fixes-v1/drivers/char/sx.c
---- linux-2.4.32/drivers/char/sx.c	2005-01-19 18:00:53.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/char/sx.c	2005-11-17 13:31:16.000000000 +0100
-@@ -522,13 +522,13 @@ static int sx_busy_wait_eq (struct sx_bo
- 
- 	func_enter ();
- 
--	for (i=0; i < TIMEOUT_1 > 0;i++) 
-+	for (i=0; i < TIMEOUT_1 ;i++) 
- 		if ((read_sx_byte (board, offset) & mask) == correctval) {
- 			func_exit ();
- 			return 1;
- 		}
- 
--	for (i=0; i < TIMEOUT_2 > 0;i++) {
-+	for (i=0; i < TIMEOUT_2 ;i++) {
- 		if ((read_sx_byte (board, offset) & mask) == correctval) {
- 			func_exit ();
- 			return 1;
-@@ -548,13 +548,13 @@ static int sx_busy_wait_neq (struct sx_b
- 
- 	func_enter ();
- 
--	for (i=0; i < TIMEOUT_1 > 0;i++) 
-+	for (i=0; i < TIMEOUT_1 ;i++) 
- 		if ((read_sx_byte (board, offset) & mask) != badval) {
- 			func_exit ();
- 			return 1;
- 		}
- 
--	for (i=0; i < TIMEOUT_2 > 0;i++) {
-+	for (i=0; i < TIMEOUT_2 ;i++) {
- 		if ((read_sx_byte (board, offset) & mask) != badval) {
- 			func_exit ();
- 			return 1;
-diff -rupN linux-2.4.32/drivers/char/tpqic02.c linux-2.4.32.more-gcc4-fixes-v1/drivers/char/tpqic02.c
---- linux-2.4.32/drivers/char/tpqic02.c	2004-08-08 10:56:31.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/char/tpqic02.c	2005-11-17 13:31:16.000000000 +0100
-@@ -202,6 +202,7 @@ static int mode_access;		/* access mode:
- 
- static int qic02_get_resources(void);
- static void qic02_release_resources(void);
-+static void finish_rw(int cmd);
- 
- /* This is a pointer to the actual kernel buffer where the interrupt routines
-  * read from/write to. It is needed because the DMA channels 1 and 3 cannot
-@@ -820,7 +821,6 @@ static int get_ext_status3(void)
- static int tp_sense(int ignore)
- {
- 	unsigned err = 0, exnr = 0, gs = 0;
--	static void finish_rw(int cmd);
- 
- 	if (TPQDBG(SENSE_TEXT))
- 		printk(TPQIC02_NAME ": tp_sense(ignore=0x%x) enter\n",
-@@ -2173,16 +2173,6 @@ static ssize_t qic02_tape_write(struct f
-  * Don't rewind if the minor bits specify density 0.
-  */
- 
--static int qic02_tape_open(struct inode *inode, struct file *filp)
--{
--	static int qic02_tape_open_no_use_count(struct inode *,
--						struct file *);
--	int open_error;
--
--	open_error = qic02_tape_open_no_use_count(inode, filp);
--	return open_error;
--}
--
- static int qic02_tape_open_no_use_count(struct inode *inode,
- 					struct file *filp)
- {
-@@ -2385,6 +2375,14 @@ static int qic02_tape_open_no_use_count(
- }				/* qic02_tape_open */
- 
- 
-+static int qic02_tape_open(struct inode *inode, struct file *filp)
-+{
-+	int open_error;
-+
-+	open_error = qic02_tape_open_no_use_count(inode, filp);
-+	return open_error;
-+}
-+
- static int qic02_tape_release(struct inode *inode, struct file *filp)
- {
- 	kdev_t dev = inode->i_rdev;
-diff -rupN linux-2.4.32/drivers/i2c/i2c-core.c linux-2.4.32.more-gcc4-fixes-v1/drivers/i2c/i2c-core.c
---- linux-2.4.32/drivers/i2c/i2c-core.c	2005-06-01 18:02:21.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/i2c/i2c-core.c	2005-11-17 13:31:16.000000000 +0100
-@@ -720,7 +720,7 @@ int i2cproc_cleanup(void)
-  * ----------------------------------------------------
-  */
- 
--int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg msgs[],int num)
-+int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs,int num)
- {
- 	int ret;
- 
-@@ -750,7 +750,7 @@ int i2c_master_send(struct i2c_client *c
- 		msg.addr   = client->addr;
- 		msg.flags = client->flags & I2C_M_TEN;
- 		msg.len = count;
--		(const char *)msg.buf = buf;
-+		msg.buf = (char *)buf;
- 	
- 		DEB2(printk(KERN_DEBUG "i2c-core.o: master_send: writing %d bytes on %s.\n",
- 			count,client->adapter->name));
-diff -rupN linux-2.4.32/drivers/i2c/i2c-proc.c linux-2.4.32.more-gcc4-fixes-v1/drivers/i2c/i2c-proc.c
---- linux-2.4.32/drivers/i2c/i2c-proc.c	2005-01-19 18:00:53.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/i2c/i2c-proc.c	2005-11-17 13:31:16.000000000 +0100
-@@ -205,7 +205,7 @@ void i2c_deregister_entry(int id)
- 		table = i2c_entries[id]->ctl_table;
- 		unregister_sysctl_table(i2c_entries[id]);
- 		/* 2-step kfree needed to keep gcc happy about const points */
--		(const char *) temp = table[4].procname;
-+		temp = (char *) table[4].procname;
- 		kfree(temp);
- 		kfree(table);
- 		i2c_entries[id] = NULL;
-@@ -287,7 +287,7 @@ int i2c_proc_chips(ctl_table * ctl, int 
- 			if(copy_to_user(buffer, BUF, buflen))
- 				return -EFAULT;
- 			curbufsize += buflen;
--			(char *) buffer += buflen;
-+			buffer = (char *) buffer + buflen;
- 		}
- 	*lenp = curbufsize;
- 	filp->f_pos += curbufsize;
-@@ -318,7 +318,7 @@ int i2c_sysctl_chips(ctl_table * table, 
- 					     sizeof(struct
- 						    i2c_chips_data)))
- 					return -EFAULT;
--				(char *) oldval +=
-+				oldval = (char *) oldval +
- 				    sizeof(struct i2c_chips_data);
- 				nrels++;
- 			}
-@@ -473,7 +473,7 @@ int i2c_parse_reals(int *nrels, void *bu
- 		       !((ret=get_user(nextchar, (char *) buffer))) &&
- 		       isspace((int) nextchar)) {
- 			bufsize--;
--			((char *) buffer)++;
-+			buffer = (char *) buffer + 1;
- 		}
- 
- 		if (ret)
-@@ -492,7 +492,7 @@ int i2c_parse_reals(int *nrels, void *bu
- 		    && (nextchar == '-')) {
- 			min = 1;
- 			bufsize--;
--			((char *) buffer)++;
-+			buffer = (char *) buffer + 1;
- 		}
- 		if (ret)
- 			return -EFAULT;
-@@ -503,7 +503,7 @@ int i2c_parse_reals(int *nrels, void *bu
- 		       isdigit((int) nextchar)) {
- 			res = res * 10 + nextchar - '0';
- 			bufsize--;
--			((char *) buffer)++;
-+			buffer = (char *) buffer + 1;
- 		}
- 		if (ret)
- 			return -EFAULT;
-@@ -517,7 +517,7 @@ int i2c_parse_reals(int *nrels, void *bu
- 		if (bufsize && (nextchar == '.')) {
- 			/* Skip the dot */
- 			bufsize--;
--			((char *) buffer)++;
-+			buffer = (char *) buffer + 1;
- 
- 			/* Read digits while they are significant */
- 			while (bufsize && (mag > 0) &&
-@@ -526,7 +526,7 @@ int i2c_parse_reals(int *nrels, void *bu
- 				res = res * 10 + nextchar - '0';
- 				mag--;
- 				bufsize--;
--				((char *) buffer)++;
-+				buffer = (char *) buffer + 1;
- 			}
- 			if (ret)
- 				return -EFAULT;
-@@ -542,7 +542,7 @@ int i2c_parse_reals(int *nrels, void *bu
- 		       !((ret=get_user(nextchar, (char *) buffer))) &&
- 		       !isspace((int) nextchar)) {
- 			bufsize--;
--			((char *) buffer)++;
-+			buffer = (char *) buffer + 1;
- 		}
- 		if (ret)
- 			return -EFAULT;
-@@ -574,7 +574,7 @@ int i2c_write_reals(int nrels, void *buf
- 			if(put_user(' ', (char *) buffer))
- 				return -EFAULT;
- 			curbufsize++;
--			((char *) buffer)++;
-+			buffer = (char *) buffer + 1;
- 		}
- 
- 		/* Fill BUF with the representation of the next string */
-@@ -615,7 +615,7 @@ int i2c_write_reals(int nrels, void *buf
- 		if(copy_to_user(buffer, BUF, buflen))
- 			return -EFAULT;
- 		curbufsize += buflen;
--		(char *) buffer += buflen;
-+		buffer = (char *) buffer + buflen;
- 
- 		nr++;
- 	}
-diff -rupN linux-2.4.32/drivers/ide/legacy/hd.c linux-2.4.32.more-gcc4-fixes-v1/drivers/ide/legacy/hd.c
---- linux-2.4.32/drivers/ide/legacy/hd.c	2003-06-14 13:30:22.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/ide/legacy/hd.c	2005-11-17 13:31:16.000000000 +0100
-@@ -694,7 +694,11 @@ static int hd_release(struct inode * ino
- 	return 0;
- }
- 
--extern struct block_device_operations hd_fops;
-+static struct block_device_operations hd_fops = {
-+	open:		hd_open,
-+	release:	hd_release,
-+	ioctl:		hd_ioctl,
-+};
- 
- static struct gendisk hd_gendisk = {
- 	major:		MAJOR_NR,
-@@ -718,12 +722,6 @@ static void hd_interrupt(int irq, void *
- 	sti();
- }
- 
--static struct block_device_operations hd_fops = {
--	open:		hd_open,
--	release:	hd_release,
--	ioctl:		hd_ioctl,
--};
--
- /*
-  * This is the hard disk IRQ description. The SA_INTERRUPT in sa_flags
-  * means we run the IRQ-handler with interrupts disabled:  this is bad for
-diff -rupN linux-2.4.32/drivers/ieee1394/highlevel.c linux-2.4.32.more-gcc4-fixes-v1/drivers/ieee1394/highlevel.c
---- linux-2.4.32/drivers/ieee1394/highlevel.c	2003-11-29 00:28:11.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/ieee1394/highlevel.c	2005-11-17 13:31:16.000000000 +0100
-@@ -500,7 +500,7 @@ int highlevel_read(struct hpsb_host *hos
-                                 rcode = RCODE_TYPE_ERROR;
-                         }
- 
--			(u8 *)data += partlength;
-+			data += partlength;
-                         length -= partlength;
-                         addr += partlength;
- 
-@@ -546,7 +546,7 @@ int highlevel_write(struct hpsb_host *ho
-                                 rcode = RCODE_TYPE_ERROR;
-                         }
- 
--			(u8 *)data += partlength;
-+			data += partlength;
-                         length -= partlength;
-                         addr += partlength;
- 
-diff -rupN linux-2.4.32/drivers/isdn/eicon/eicon.h linux-2.4.32.more-gcc4-fixes-v1/drivers/isdn/eicon/eicon.h
---- linux-2.4.32/drivers/isdn/eicon/eicon.h	2002-08-07 00:52:20.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/isdn/eicon/eicon.h	2005-11-17 13:31:16.000000000 +0100
-@@ -344,7 +344,6 @@ typedef struct eicon_card {
- 
- #include "eicon_idi.h"
- 
--extern eicon_card *cards;
- extern char *eicon_ctype_name[];
- 
- 
-diff -rupN linux-2.4.32/drivers/isdn/hisax/hfc_pci.c linux-2.4.32.more-gcc4-fixes-v1/drivers/isdn/hisax/hfc_pci.c
---- linux-2.4.32/drivers/isdn/hisax/hfc_pci.c	2004-11-17 18:36:42.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/isdn/hisax/hfc_pci.c	2005-11-17 13:31:16.000000000 +0100
-@@ -1742,7 +1742,7 @@ setup_hfcpci(struct IsdnCard *card)
- 		/* Allocate memory for FIFOS */
- 		/* Because the HFC-PCI needs a 32K physical alignment, we */
- 		/* need to allocate the double mem and align the address */
--		if (!((void *) cs->hw.hfcpci.share_start = kmalloc(65536, GFP_KERNEL))) {
-+		if (!(cs->hw.hfcpci.share_start = kmalloc(65536, GFP_KERNEL))) {
- 			printk(KERN_WARNING "HFC-PCI: Error allocating memory for FIFO!\n");
- 			return 0;
- 		}
-diff -rupN linux-2.4.32/drivers/md/lvm-internal.h linux-2.4.32.more-gcc4-fixes-v1/drivers/md/lvm-internal.h
---- linux-2.4.32/drivers/md/lvm-internal.h	2003-11-29 00:28:12.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/md/lvm-internal.h	2005-11-17 13:31:16.000000000 +0100
-@@ -45,7 +45,6 @@ extern int loadtime;
- extern const char *const lvm_name;
- 
- 
--extern uint vg_count;
- extern vg_t *vg[];
- extern struct file_operations lvm_chr_fops;
- 
-diff -rupN linux-2.4.32/drivers/media/video/bttvp.h linux-2.4.32.more-gcc4-fixes-v1/drivers/media/video/bttvp.h
---- linux-2.4.32/drivers/media/video/bttvp.h	2003-11-29 00:28:12.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/media/video/bttvp.h	2005-11-17 13:31:16.000000000 +0100
-@@ -58,7 +58,6 @@ extern int pvr_boot(struct bttv *btv);
- 
- #define BTTV_MAX 16
- extern unsigned int bttv_num;			/* number of Bt848s in use */
--extern struct bttv bttvs[BTTV_MAX];
- 
- #define UNSET -1U
- 
-@@ -203,6 +202,8 @@ struct bttv {
- 	int shutdown;
-         void (*audio_hook)(struct bttv *btv, struct video_audio *v, int set);
- };
-+
-+extern struct bttv bttvs[BTTV_MAX];
- #endif
- 
- #define btwrite(dat,adr)    writel((dat), (char *) (btv->bt848_mem+(adr)))
-diff -rupN linux-2.4.32/drivers/media/video/videodev.c linux-2.4.32.more-gcc4-fixes-v1/drivers/media/video/videodev.c
---- linux-2.4.32/drivers/media/video/videodev.c	2004-08-08 10:56:31.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/media/video/videodev.c	2005-11-17 13:31:16.000000000 +0100
-@@ -489,7 +489,18 @@ static void videodev_proc_destroy_dev (s
- 
- #endif /* CONFIG_VIDEO_PROC_FS */
- 
--extern struct file_operations video_fops;
-+static struct file_operations video_fops=
-+{
-+	owner:		THIS_MODULE,
-+	llseek:		no_llseek,
-+	read:		video_read,
-+	write:		video_write,
-+	ioctl:		video_ioctl,
-+	mmap:		video_mmap,
-+	open:		video_open,
-+	release:	video_release,
-+	poll:		video_poll,
-+};
- 
- /**
-  *	video_register_device - register video4linux devices
-@@ -633,19 +644,6 @@ void video_unregister_device(struct vide
- }
- 
- 
--static struct file_operations video_fops=
--{
--	owner:		THIS_MODULE,
--	llseek:		no_llseek,
--	read:		video_read,
--	write:		video_write,
--	ioctl:		video_ioctl,
--	mmap:		video_mmap,
--	open:		video_open,
--	release:	video_release,
--	poll:		video_poll,
--};
--
- /*
-  *	Initialise video for linux
-  */
-diff -rupN linux-2.4.32/drivers/net/3c507.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/3c507.c
---- linux-2.4.32/drivers/net/3c507.c	2003-11-29 00:28:12.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/3c507.c	2005-11-17 13:31:16.000000000 +0100
-@@ -306,6 +306,7 @@ static void el16_tx_timeout (struct net_
- static void hardware_send_packet(struct net_device *dev, void *buf, short length, short pad);
- static void init_82586_mem(struct net_device *dev);
- static struct ethtool_ops netdev_ethtool_ops;
-+static void init_rx_bufs(struct net_device *);
- 
- 
- /* Check for a network adaptor of this type, and return '0' iff one exists.
-@@ -602,7 +603,6 @@ static void el16_interrupt(int irq, void
- 	}
- 
- 	if ((status & 0x0070) != 0x0040 && netif_running(dev)) {
--		static void init_rx_bufs(struct net_device *);
- 		/* The Rx unit is not ready, it must be hung.  Restart the receiver by
- 		   initializing the rx buffers, and issuing an Rx start command. */
- 		if (net_debug)
-diff -rupN linux-2.4.32/drivers/net/acenic.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/acenic.c
---- linux-2.4.32/drivers/net/acenic.c	2003-08-25 20:07:43.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/acenic.c	2005-11-17 13:31:16.000000000 +0100
-@@ -594,6 +594,7 @@ static struct net_device *root_dev;
- 
- static int probed __initdata = 0;
- 
-+static void ace_watchdog(struct net_device *dev);
- 
- int __devinit acenic_probe (ACE_PROBE_ARG)
- {
-@@ -665,7 +666,6 @@ int __devinit acenic_probe (ACE_PROBE_AR
- 		dev->vlan_rx_kill_vid = ace_vlan_rx_kill_vid;
- #endif
- 		if (1) {
--			static void ace_watchdog(struct net_device *dev);
- 			dev->tx_timeout = &ace_watchdog;
- 			dev->watchdog_timeo = 5*HZ;
- 		}
-diff -rupN linux-2.4.32/drivers/net/arcnet/arcnet.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/arcnet/arcnet.c
---- linux-2.4.32/drivers/net/arcnet/arcnet.c	2003-08-25 20:07:43.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/arcnet/arcnet.c	2005-11-17 13:31:16.000000000 +0100
-@@ -277,7 +277,7 @@ static void release_arcbuf(struct net_de
- 	BUGLVL(D_DURING) {
- 		BUGMSG(D_DURING, "release_arcbuf: freed #%d; buffer queue is now: ",
- 		       bufnum);
--		for (i = lp->next_buf; i != lp->first_free_buf; i = ++i % 5)
-+		for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5)
- 			BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]);
- 		BUGMSG2(D_DURING, "\n");
- 	}
-@@ -310,7 +310,7 @@ static int get_arcbuf(struct net_device 
- 
- 	BUGLVL(D_DURING) {
- 		BUGMSG(D_DURING, "get_arcbuf: got #%d; buffer queue is now: ", buf);
--		for (i = lp->next_buf; i != lp->first_free_buf; i = ++i % 5)
-+		for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5)
- 			BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]);
- 		BUGMSG2(D_DURING, "\n");
- 	}
-diff -rupN linux-2.4.32/drivers/net/arlan.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/arlan.c
---- linux-2.4.32/drivers/net/arlan.c	2002-08-07 00:52:20.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/arlan.c	2005-11-17 13:31:16.000000000 +0100
-@@ -12,7 +12,7 @@
- #  error FIXME: this driver requires a 32-bit platform
- #endif
- 
--static const char *arlan_version = "C.Jennigs 97 & Elmer.Joandi@ut.ee  Oct'98, http://www.ylenurme.ee/~elmer/655/";
-+const char *arlan_version = "C.Jennigs 97 & Elmer.Joandi@ut.ee  Oct'98, http://www.ylenurme.ee/~elmer/655/";
- 
- struct net_device *arlan_device[MAX_ARLANS];
- int last_arlan;
-diff -rupN linux-2.4.32/drivers/net/arlan.h linux-2.4.32.more-gcc4-fixes-v1/drivers/net/arlan.h
---- linux-2.4.32/drivers/net/arlan.h	2001-03-30 19:05:06.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/arlan.h	2005-11-17 13:31:16.000000000 +0100
-@@ -47,7 +47,6 @@ extern int 	init_arlan_proc(void);
- 
- extern struct net_device *arlan_device[MAX_ARLANS];
- extern int	arlan_debug;
--extern char *	siteName;
- extern int	arlan_entry_debug;
- extern int	arlan_exit_debug;
- extern int	testMemory;
-diff -rupN linux-2.4.32/drivers/net/bonding/bond_alb.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/bonding/bond_alb.c
---- linux-2.4.32/drivers/net/bonding/bond_alb.c	2004-04-14 20:22:20.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/bonding/bond_alb.c	2005-11-17 13:31:16.000000000 +0100
-@@ -1275,7 +1275,7 @@ void bond_alb_deinitialize(struct bondin
- int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
- {
- 	struct bonding *bond = bond_dev->priv;
--	struct ethhdr *eth_data = (struct ethhdr *)skb->mac.raw = skb->data;
-+	struct ethhdr *eth_data;
- 	struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
- 	struct slave *tx_slave = NULL;
- 	static u32 ip_bcast = 0xffffffff;
-@@ -1285,6 +1285,9 @@ int bond_alb_xmit(struct sk_buff *skb, s
- 	u8 *hash_start = NULL;
- 	int res = 1;
- 
-+	skb->mac.raw = (unsigned char *)skb->data;
-+	eth_data = (struct ethhdr *)skb->mac.raw;
-+
- 	/* make sure that the curr_active_slave and the slaves list do
- 	 * not change during tx
- 	 */
-diff -rupN linux-2.4.32/drivers/net/de4x5.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/de4x5.c
---- linux-2.4.32/drivers/net/de4x5.c	2004-02-18 15:16:23.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/de4x5.c	2005-11-17 13:31:16.000000000 +0100
-@@ -5109,7 +5109,7 @@ mii_get_phy(struct net_device *dev)
-     lp->useMII = TRUE;
- 
-     /* Search the MII address space for possible PHY devices */
--    for (n=0, lp->mii_cnt=0, i=1; !((i==1) && (n==1)); i=(++i)%DE4X5_MAX_MII) {
-+    for (n=0, lp->mii_cnt=0, i=1; !((i==1) && (n==1)); i=(i+1)%DE4X5_MAX_MII) {
- 	lp->phy[lp->active].addr = i;
- 	if (i==0) n++;                             /* Count cycles */
- 	while (de4x5_reset_phy(dev)<0) udelay(100);/* Wait for reset */
-diff -rupN linux-2.4.32/drivers/net/depca.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/depca.c
---- linux-2.4.32/drivers/net/depca.c	2003-06-14 13:30:23.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/depca.c	2005-11-17 13:31:16.000000000 +0100
-@@ -1746,7 +1746,7 @@ static int load_packet(struct net_device
- 
- 		/* set up the buffer descriptors */
- 		len = (skb->len < ETH_ZLEN) ? ETH_ZLEN : skb->len;
--		for (i = entry; i != end; i = (++i) & lp->txRingMask) {
-+		for (i = entry; i != end; i = (i+1) & lp->txRingMask) {
- 			/* clean out flags */
- 			writel(readl(&lp->tx_ring[i].base) & ~T_FLAGS, &lp->tx_ring[i].base);
- 			writew(0x0000, &lp->tx_ring[i].misc);	/* clears other error flags */
-diff -rupN linux-2.4.32/drivers/net/hamradio/baycom_epp.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/hamradio/baycom_epp.c
---- linux-2.4.32/drivers/net/hamradio/baycom_epp.c	2002-11-30 17:12:25.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/hamradio/baycom_epp.c	2005-11-17 13:31:16.000000000 +0100
-@@ -60,8 +60,10 @@
- #include <net/ax25.h> 
- #endif /* CONFIG_AX25 || CONFIG_AX25_MODULE */
- 
-+static int my_errno;
-+#define errno my_errno
- #define __KERNEL_SYSCALLS__
--#include <linux/unistd.h>
-+#include <asm/unistd.h>
- 
- /* --------------------------------------------------------------------- */
- 
-@@ -370,8 +372,6 @@ static char eppconfig_path[256] = "/usr/
- 
- static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/usr/bin:/bin", NULL };
- 
--static int errno;
--
- static int exec_eppfpga(void *b)
- {
- 	struct baycom_state *bc = (struct baycom_state *)b;
-diff -rupN linux-2.4.32/drivers/net/hamradio/soundmodem/sm.h linux-2.4.32.more-gcc4-fixes-v1/drivers/net/hamradio/soundmodem/sm.h
---- linux-2.4.32/drivers/net/hamradio/soundmodem/sm.h	2002-08-07 00:52:20.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/hamradio/soundmodem/sm.h	2005-11-17 13:31:16.000000000 +0100
-@@ -151,7 +151,6 @@ struct hardware_info {
- /* --------------------------------------------------------------------- */
- 
- extern const char sm_drvname[];
--extern const char sm_drvinfo[];
- 
- /* --------------------------------------------------------------------- */
- /*
-@@ -353,7 +352,6 @@ extern const struct hardware_info sm_hw_
- 
- extern const struct modem_tx_info *sm_modem_tx_table[];
- extern const struct modem_rx_info *sm_modem_rx_table[];
--extern const struct hardware_info *sm_hardware_table[];
- 
- /* --------------------------------------------------------------------- */
- 
-diff -rupN linux-2.4.32/drivers/net/irda/donauboe.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/irda/donauboe.c
---- linux-2.4.32/drivers/net/irda/donauboe.c	2003-06-14 13:30:23.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/irda/donauboe.c	2005-11-17 13:31:16.000000000 +0100
-@@ -209,7 +209,11 @@ static int do_probe = DO_PROBE;
- #ifdef CRC_EXPORTED
- extern __u16 const irda_crc16_table[];
- #else
--static __u16 const irda_crc16_table[256] = {
-+/* Our local version of irda_crc16_table must have a unique
-+   name to prevent extern-redefined-as-static compile errors.
-+   This #define redirects the irda_fcs() macro to our version. */
-+#define irda_crc16_table donauboe_irda_crc16_table
-+static __u16 const donauboe_irda_crc16_table[256] = {
-   0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
-   0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
-   0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
-diff -rupN linux-2.4.32/drivers/net/rrunner.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/rrunner.c
---- linux-2.4.32/drivers/net/rrunner.c	2003-06-14 13:30:23.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/rrunner.c	2005-11-17 13:31:16.000000000 +0100
-@@ -234,7 +234,7 @@ int __init rr_hippi_probe (struct net_de
- 		 * Don't access any registes before this point!
- 		 */
- #ifdef __BIG_ENDIAN
--		writel(readl(&regs->HostCtrl) | NO_SWAP, &regs->HostCtrl);
-+		writel(readl(&rrpriv->regs->HostCtrl) | NO_SWAP, &rrpriv->regs->HostCtrl);
- #endif
- 		/*
- 		 * Need to add a case for little-endian 64-bit hosts here.
-diff -rupN linux-2.4.32/drivers/net/sk98lin/skvpd.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/sk98lin/skvpd.c
---- linux-2.4.32/drivers/net/sk98lin/skvpd.c	2005-04-04 19:56:04.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/sk98lin/skvpd.c	2005-11-17 13:31:16.000000000 +0100
-@@ -472,7 +472,7 @@ SK_IOC	IoC)	/* IO Context */
- 	    ((unsigned char)pAC->vpd.vpd_buf[0x40] == 0x3c) &&
- 	    ((unsigned char)pAC->vpd.vpd_buf[0x41] == 0x45) ) {
- 		printk(KERN_INFO "sk98lin : humm... Asus mainboard with buggy VPD ? correcting data.\n");
--		(unsigned char)pAC->vpd.vpd_buf[0x40] = 0x38;
-+		pAC->vpd.vpd_buf[0x40] = 0x38;
- 	}
- 
- 	/* find the end tag of the RO area */
-diff -rupN linux-2.4.32/drivers/net/wan/comx-hw-comx.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/wan/comx-hw-comx.c
---- linux-2.4.32/drivers/net/wan/comx-hw-comx.c	2002-11-30 17:12:26.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/wan/comx-hw-comx.c	2005-11-17 13:31:16.000000000 +0100
-@@ -92,9 +92,9 @@ struct comx_privdata {
- };
- 
- static struct net_device *memory_used[(COMX_MEM_MAX - COMX_MEM_MIN) / 0x10000];
--extern struct comx_hardware hicomx_hw;
--extern struct comx_hardware comx_hw;
--extern struct comx_hardware cmx_hw;
-+static struct comx_hardware hicomx_hw;
-+static struct comx_hardware comx_hw;
-+static struct comx_hardware cmx_hw;
- 
- static void COMX_interrupt(int irq, void *dev_id, struct pt_regs *regs);
- 
-diff -rupN linux-2.4.32/drivers/net/wan/comx.h linux-2.4.32.more-gcc4-fixes-v1/drivers/net/wan/comx.h
---- linux-2.4.32/drivers/net/wan/comx.h	2001-08-16 23:47:01.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/wan/comx.h	2005-11-17 13:31:16.000000000 +0100
-@@ -212,8 +212,6 @@ typedef u16	word;
- #define	SEEK_END	2
- #endif
- 
--extern struct proc_dir_entry * comx_root_dir;
--
- extern int	comx_register_hardware(struct comx_hardware *comx_hw);
- extern int	comx_unregister_hardware(char *name);
- extern int	comx_register_protocol(struct comx_protocol *comx_line);
-diff -rupN linux-2.4.32/drivers/net/wan/sdla_fr.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/wan/sdla_fr.c
---- linux-2.4.32/drivers/net/wan/sdla_fr.c	2003-11-29 00:28:12.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/wan/sdla_fr.c	2005-11-17 13:31:16.000000000 +0100
-@@ -3929,7 +3929,7 @@ static int process_udp_mgmt_pkt(sdla_t* 
-                                 break;
-                         }
- 
--			(void *)ptr_trc_el = card->u.f.curr_trc_el;
-+			ptr_trc_el = (void *)card->u.f.curr_trc_el;
- 
-                         buffer_length = 0;
- 			fr_udp_pkt->data[0x00] = 0x00;
-@@ -3980,7 +3980,7 @@ static int process_udp_mgmt_pkt(sdla_t* 
-                                
- 				ptr_trc_el ++;
- 				if((void *)ptr_trc_el > card->u.f.trc_el_last)
--					(void*)ptr_trc_el = card->u.f.trc_el_base;
-+					ptr_trc_el = (void*)card->u.f.trc_el_base;
- 
- 				buffer_length += sizeof(fpipemon_trc_hdr_t);
-                                	if(fpipemon_trc->fpipemon_trc_hdr.data_passed) {
-diff -rupN linux-2.4.32/drivers/net/wan/sdladrv.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/wan/sdladrv.c
---- linux-2.4.32/drivers/net/wan/sdladrv.c	2001-09-23 21:06:34.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/wan/sdladrv.c	2005-11-17 13:31:16.000000000 +0100
-@@ -1002,7 +1002,7 @@ int sdla_peek (sdlahw_t* hw, unsigned lo
-                         peek_by_4 ((unsigned long)hw->dpmbase + curpos, buf,
- 				curlen);
-                         addr       += curlen;
--                        (char*)buf += curlen;
-+                        buf         = (char*)buf + curlen;
-                         len        -= curlen;
-                 }
- 
-@@ -1086,7 +1086,7 @@ int sdla_poke (sdlahw_t* hw, unsigned lo
-                         poke_by_4 ((unsigned long)hw->dpmbase + curpos, buf,
- 				curlen);
- 	                addr       += curlen;
--                        (char*)buf += curlen;
-+                        buf         = (char*)buf + curlen;
-                         len        -= curlen;
-                 }
- 
-@@ -2127,10 +2127,10 @@ static int detect_s514 (sdlahw_t* hw)
- 		modname, hw->irq);
- 
- 	/* map the physical PCI memory to virtual memory */
--	(void *)hw->dpmbase = ioremap((unsigned long)S514_mem_base_addr,
-+	hw->dpmbase = (void *)ioremap((unsigned long)S514_mem_base_addr,
- 		(unsigned long)MAX_SIZEOF_S514_MEMORY);
-     	/* map the physical control register memory to virtual memory */
--	(void *)hw->vector = ioremap(
-+	hw->vector = (unsigned long)ioremap(
- 		(unsigned long)(S514_mem_base_addr + S514_CTRL_REG_BYTE),
- 		(unsigned long)16);
-      
-diff -rupN linux-2.4.32/drivers/net/wan/sdlamain.c linux-2.4.32.more-gcc4-fixes-v1/drivers/net/wan/sdlamain.c
---- linux-2.4.32/drivers/net/wan/sdlamain.c	2003-11-29 00:28:12.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/net/wan/sdlamain.c	2005-11-17 13:31:16.000000000 +0100
-@@ -1027,7 +1027,7 @@ static int ioctl_dump (sdla_t* card, sdl
-                       #endif
-                         dump.length     -= len;
-                         dump.offset     += len;
--                        (char*)dump.ptr += len;
-+                        dump.ptr         = (char*)dump.ptr + len;
-                 }
- 		
-                 sdla_mapmem(&card->hw, oldvec);/* restore DPM window position */
-diff -rupN linux-2.4.32/drivers/scsi/advansys.c linux-2.4.32.more-gcc4-fixes-v1/drivers/scsi/advansys.c
---- linux-2.4.32/drivers/scsi/advansys.c	2005-01-19 18:00:53.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/scsi/advansys.c	2005-11-17 13:31:16.000000000 +0100
-@@ -3456,9 +3456,9 @@ do { \
- /*
-  * Default EEPROM Configuration structure defined in a_init.c.
-  */
--extern ADVEEP_3550_CONFIG Default_3550_EEPROM_Config;
--extern ADVEEP_38C0800_CONFIG Default_38C0800_EEPROM_Config;
--extern ADVEEP_38C1600_CONFIG Default_38C1600_EEPROM_Config;
-+static ADVEEP_3550_CONFIG Default_3550_EEPROM_Config;
-+static ADVEEP_38C0800_CONFIG Default_38C0800_EEPROM_Config;
-+static ADVEEP_38C1600_CONFIG Default_38C1600_EEPROM_Config;
- 
- /*
-  * DvcGetPhyAddr() flag arguments
-@@ -7171,7 +7171,7 @@ asc_isr_callback(ASC_DVC_VAR *asc_dvc_va
-          * then return the number of underrun bytes.
-          */
-         if (scp->request_bufflen != 0 && qdonep->remain_bytes != 0 &&
--            qdonep->remain_bytes <= scp->request_bufflen != 0) {
-+            qdonep->remain_bytes <= scp->request_bufflen) {
-             ASC_DBG1(1, "asc_isr_callback: underrun condition %u bytes\n",
-             (unsigned) qdonep->remain_bytes);
-             scp->resid = qdonep->remain_bytes;
-diff -rupN linux-2.4.32/drivers/scsi/atp870u.c linux-2.4.32.more-gcc4-fixes-v1/drivers/scsi/atp870u.c
---- linux-2.4.32/drivers/scsi/atp870u.c	2002-08-07 00:52:21.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/scsi/atp870u.c	2005-11-17 13:31:16.000000000 +0100
-@@ -807,19 +807,19 @@ oktosend:
- 			bttl = virt_to_bus(sgpnt[j].address);
- 			l = sgpnt[j].length;
- 			while (l > 0x10000) {
--				(unsigned short int) (((unsigned short int *) (prd))[i + 3]) = 0x0000;
--				(unsigned short int) (((unsigned short int *) (prd))[i + 2]) = 0x0000;
--				(unsigned long) (((unsigned long *) (prd))[i >> 1]) = bttl;
-+				(((unsigned short int *) (prd))[i + 3]) = 0x0000;
-+				(((unsigned short int *) (prd))[i + 2]) = 0x0000;
-+				(((unsigned long *) (prd))[i >> 1]) = bttl;
- 				l -= 0x10000;
- 				bttl += 0x10000;
- 				i += 0x04;
- 			}
--			(unsigned long) (((unsigned long *) (prd))[i >> 1]) = bttl;
--			(unsigned short int) (((unsigned short int *) (prd))[i + 2]) = l;
--			(unsigned short int) (((unsigned short int *) (prd))[i + 3]) = 0;
-+			(((unsigned long *) (prd))[i >> 1]) = bttl;
-+			(((unsigned short int *) (prd))[i + 2]) = l;
-+			(((unsigned short int *) (prd))[i + 3]) = 0;
- 			i += 0x04;
- 		}
--		(unsigned short int) (((unsigned short int *) (prd))[i - 1]) = 0x8000;
-+		(((unsigned short int *) (prd))[i - 1]) = 0x8000;
- 	} else {
- 		/*
- 		 *	For a linear request write a chain of blocks
-@@ -828,16 +828,16 @@ oktosend:
- 		l = workrequ->request_bufflen;
- 		i = 0;
- 		while (l > 0x10000) {
--			(unsigned short int) (((unsigned short int *) (prd))[i + 3]) = 0x0000;
--			(unsigned short int) (((unsigned short int *) (prd))[i + 2]) = 0x0000;
--			(unsigned long) (((unsigned long *) (prd))[i >> 1]) = bttl;
-+			(((unsigned short int *) (prd))[i + 3]) = 0x0000;
-+			(((unsigned short int *) (prd))[i + 2]) = 0x0000;
-+			(((unsigned long *) (prd))[i >> 1]) = bttl;
- 			l -= 0x10000;
- 			bttl += 0x10000;
- 			i += 0x04;
- 		}
--		(unsigned short int) (((unsigned short int *) (prd))[i + 3]) = 0x8000;
--		(unsigned short int) (((unsigned short int *) (prd))[i + 2]) = l;
--		(unsigned long) (((unsigned long *) (prd))[i >> 1]) = bttl;
-+		(((unsigned short int *) (prd))[i + 3]) = 0x8000;
-+		(((unsigned short int *) (prd))[i + 2]) = l;
-+		(((unsigned long *) (prd))[i >> 1]) = bttl;
- 	}
- 	tmpcip = tmpcip + 4;
- 	dev->id[target_id].prdaddru = virt_to_bus(dev->id[target_id].prd_tableu);
-diff -rupN linux-2.4.32/drivers/scsi/cpqfcTSstructs.h linux-2.4.32.more-gcc4-fixes-v1/drivers/scsi/cpqfcTSstructs.h
---- linux-2.4.32/drivers/scsi/cpqfcTSstructs.h	2004-02-18 15:16:23.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/scsi/cpqfcTSstructs.h	2005-11-17 13:31:16.000000000 +0100
-@@ -965,7 +965,6 @@ void fcSestReset(CPQFCHBA *);
- 
- void cpqfc_pci_unmap(struct pci_dev *pcidev, Scsi_Cmnd * cmd, PTACHYON fcChip, __u32 x_ID);
- 
--extern const __u8 valid_al_pa[];
- extern const int number_of_al_pa;
- 
- #define FCP_RESID_UNDER   0x80000
-diff -rupN linux-2.4.32/drivers/scsi/cpqfcTSworker.c linux-2.4.32.more-gcc4-fixes-v1/drivers/scsi/cpqfcTSworker.c
---- linux-2.4.32/drivers/scsi/cpqfcTSworker.c	2003-06-14 13:30:24.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/scsi/cpqfcTSworker.c	2005-11-17 13:31:16.000000000 +0100
-@@ -48,6 +48,7 @@
- #include "cpqfcTSchip.h"
- #include "cpqfcTSstructs.h"
- #include "cpqfcTStrigger.h"
-+static const __u8 valid_al_pa[];
- 
- //#define LOGIN_DBG 1
- 
-diff -rupN linux-2.4.32/drivers/sound/wavfront.c linux-2.4.32.more-gcc4-fixes-v1/drivers/sound/wavfront.c
---- linux-2.4.32/drivers/sound/wavfront.c	2001-10-11 13:34:42.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/sound/wavfront.c	2005-11-17 13:31:16.000000000 +0100
-@@ -2484,11 +2484,11 @@ static int __init detect_wavefront (int 
- #include <linux/fs.h>
- #include <linux/mm.h>
- #include <linux/slab.h>
--#include <linux/unistd.h>
-+static int my_errno;
-+#define errno my_errno
-+#include <asm/unistd.h>
- #include <asm/uaccess.h>
- 
--static int errno; 
--
- static int
- wavefront_download_firmware (char *path)
- 
-diff -rupN linux-2.4.32/drivers/usb/audio.c linux-2.4.32.more-gcc4-fixes-v1/drivers/usb/audio.c
---- linux-2.4.32/drivers/usb/audio.c	2004-11-17 18:36:42.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/drivers/usb/audio.c	2005-11-17 13:31:16.000000000 +0100
-@@ -462,6 +462,7 @@ struct usb_audio_state {
- 
- /* prevent picking up a bogus abs macro */
- #undef abs
-+#define abs my_abs
- static inline int abs(int x)
- {
-         if (x < 0)
-diff -rupN linux-2.4.32/fs/intermezzo/presto.c linux-2.4.32.more-gcc4-fixes-v1/fs/intermezzo/presto.c
---- linux-2.4.32/fs/intermezzo/presto.c	2002-11-30 17:12:28.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/fs/intermezzo/presto.c	2005-11-17 13:31:16.000000000 +0100
-@@ -344,8 +344,8 @@ int izo_mark_cache(struct dentry *dentry
-                 return -EBADF;
-         }
- 
--        ((int)cache->cache_flags) &= and_flag;
--        ((int)cache->cache_flags) |= or_flag;
-+        cache->cache_flags &= and_flag;
-+        cache->cache_flags |= or_flag;
-         if (res)
-                 *res = (int)cache->cache_flags;
- 
-@@ -383,8 +383,8 @@ int izo_mark_fset(struct dentry *dentry,
-                 make_bad_inode(dentry->d_inode);
-                 return -EBADF;
-         }
--        ((int)fset->fset_flags) &= and_flag;
--        ((int)fset->fset_flags) |= or_flag;
-+        fset->fset_flags &= and_flag;
-+        fset->fset_flags |= or_flag;
-         if (res)
-                 *res = (int)fset->fset_flags;
- 
-diff -rupN linux-2.4.32/include/asm-ppc/spinlock.h linux-2.4.32.more-gcc4-fixes-v1/include/asm-ppc/spinlock.h
---- linux-2.4.32/include/asm-ppc/spinlock.h	2003-06-14 13:30:28.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/include/asm-ppc/spinlock.h	2005-11-17 13:31:16.000000000 +0100
-@@ -40,7 +40,6 @@ typedef struct {
- extern void _spin_lock(spinlock_t *lock);
- extern void _spin_unlock(spinlock_t *lock);
- extern int spin_trylock(spinlock_t *lock);
--extern unsigned long __spin_trylock(volatile unsigned long *lock);
- 
- #define spin_lock(lp)			_spin_lock(lp)
- #define spin_unlock(lp)			_spin_unlock(lp)
-diff -rupN linux-2.4.32/include/linux/fsfilter.h linux-2.4.32.more-gcc4-fixes-v1/include/linux/fsfilter.h
---- linux-2.4.32/include/linux/fsfilter.h	2004-11-17 18:36:42.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/include/linux/fsfilter.h	2005-11-17 13:31:16.000000000 +0100
-@@ -70,7 +70,6 @@ struct filter_fs {
- #define FILTER_FS_XFS 3
- #define FILTER_FS_OBDFS 4
- #define FILTER_FS_TMPFS 5
--extern struct filter_fs filter_oppar[FILTER_FS_TYPES];
- 
- struct filter_fs *filter_get_filter_fs(const char *cache_type);
- void filter_setup_journal_ops(struct filter_fs *ops, char *cache_type);
-diff -rupN linux-2.4.32/include/linux/generic_serial.h linux-2.4.32.more-gcc4-fixes-v1/include/linux/generic_serial.h
---- linux-2.4.32/include/linux/generic_serial.h	2002-02-26 13:26:58.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/include/linux/generic_serial.h	2005-11-17 13:31:16.000000000 +0100
-@@ -98,6 +98,4 @@ int  gs_setserial(struct gs_port *port, 
- int  gs_getserial(struct gs_port *port, struct serial_struct *sp);
- void gs_got_break(struct gs_port *port);
- 
--extern int gs_debug;
--
- #endif
-diff -rupN linux-2.4.32/include/linux/i2c.h linux-2.4.32.more-gcc4-fixes-v1/include/linux/i2c.h
---- linux-2.4.32/include/linux/i2c.h	2005-06-01 18:02:21.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/include/linux/i2c.h	2005-11-17 13:31:16.000000000 +0100
-@@ -70,7 +70,7 @@ extern int i2c_master_recv(struct i2c_cl
- 
- /* Transfer num messages.
-  */
--extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],int num);
-+extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msg,int num);
- 
- /*
-  * Some adapter types (i.e. PCF 8584 based ones) may support slave behaviuor. 
-@@ -197,7 +197,7 @@ struct i2c_algorithm {
- 	   to NULL. If an adapter algorithm can do SMBus access, set 
- 	   smbus_xfer. If set to NULL, the SMBus protocol is simulated
- 	   using common I2C messages */
--	int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg msgs[], 
-+	int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
- 	                   int num);
- 	int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, 
- 	                   unsigned short flags, char read_write,
-diff -rupN linux-2.4.32/include/linux/intermezzo_fs.h linux-2.4.32.more-gcc4-fixes-v1/include/linux/intermezzo_fs.h
---- linux-2.4.32/include/linux/intermezzo_fs.h	2005-01-19 18:00:53.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/include/linux/intermezzo_fs.h	2005-11-17 13:31:16.000000000 +0100
-@@ -321,7 +321,6 @@ int presto_fwrite(struct file *file, con
- int presto_ispresto(struct inode *);
- 
- /* super.c */
--extern struct file_system_type presto_fs_type;
- extern int init_intermezzo_fs(void);
- 
- /* fileset.c */
-diff -rupN linux-2.4.32/include/linux/nbd.h linux-2.4.32.more-gcc4-fixes-v1/include/linux/nbd.h
---- linux-2.4.32/include/linux/nbd.h	2002-08-07 00:52:26.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/include/linux/nbd.h	2005-11-17 13:31:16.000000000 +0100
-@@ -29,34 +29,6 @@
- 
- #include <linux/blk.h>
- 
--#ifdef PARANOIA
--extern int requests_in;
--extern int requests_out;
--#endif
--
--static void
--nbd_end_request(struct request *req)
--{
--	struct buffer_head *bh;
--	unsigned nsect;
--	unsigned long flags;
--	int uptodate = (req->errors == 0) ? 1 : 0;
--
--#ifdef PARANOIA
--	requests_out++;
--#endif
--	spin_lock_irqsave(&io_request_lock, flags);
--	while((bh = req->bh) != NULL) {
--		nsect = bh->b_size >> 9;
--		blk_finished_io(nsect);
--		req->bh = bh->b_reqnext;
--		bh->b_reqnext = NULL;
--		bh->b_end_io(bh, uptodate);
--	}
--	blkdev_release_request(req);
--	spin_unlock_irqrestore(&io_request_lock, flags);
--}
--
- #define MAX_NBD 128
- 
- struct nbd_device {
-diff -rupN linux-2.4.32/include/net/irda/irlan_event.h linux-2.4.32.more-gcc4-fixes-v1/include/net/irda/irlan_event.h
---- linux-2.4.32/include/net/irda/irlan_event.h	1999-03-09 11:36:02.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/include/net/irda/irlan_event.h	2005-11-17 13:31:16.000000000 +0100
-@@ -67,8 +67,6 @@ typedef enum {
- 	IRLAN_WATCHDOG_TIMEOUT,
- } IRLAN_EVENT;
- 
--extern char *irlan_state[];
--
- void irlan_do_client_event(struct irlan_cb *self, IRLAN_EVENT event, 
- 			   struct sk_buff *skb);
- 
-diff -rupN linux-2.4.32/include/net/irda/irttp.h linux-2.4.32.more-gcc4-fixes-v1/include/net/irda/irttp.h
---- linux-2.4.32/include/net/irda/irttp.h	2003-06-14 13:30:29.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/include/net/irda/irttp.h	2005-11-17 13:31:16.000000000 +0100
-@@ -209,6 +209,4 @@ static inline int irttp_is_primary(struc
- 	return(irlap_is_primary(self->lsap->lap->irlap));
- }
- 
--extern struct irttp_cb *irttp;
--
- #endif /* IRTTP_H */
-diff -rupN linux-2.4.32/include/net/irda/qos.h linux-2.4.32.more-gcc4-fixes-v1/include/net/irda/qos.h
---- linux-2.4.32/include/net/irda/qos.h	2001-07-21 11:47:34.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/include/net/irda/qos.h	2005-11-17 13:31:16.000000000 +0100
-@@ -83,7 +83,6 @@ struct qos_info {
- extern int sysctl_max_baud_rate;
- extern int sysctl_max_inactive_time;
- 
--extern __u32 baud_rates[];
- extern __u32 data_sizes[];
- extern __u32 min_turn_times[];
- extern __u32 add_bofs[];
-diff -rupN linux-2.4.32/include/net/udp.h linux-2.4.32.more-gcc4-fixes-v1/include/net/udp.h
---- linux-2.4.32/include/net/udp.h	2005-01-19 18:00:53.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/include/net/udp.h	2005-11-17 13:31:16.000000000 +0100
-@@ -25,6 +25,7 @@
- #include <linux/udp.h>
- #include <linux/poll.h>
- #include <net/sock.h>
-+#include <net/snmp.h>
- 
- #define UDP_HTABLE_SIZE		128
- 
-diff -rupN linux-2.4.32/net/ipv6/ip6_fib.c linux-2.4.32.more-gcc4-fixes-v1/net/ipv6/ip6_fib.c
---- linux-2.4.32/net/ipv6/ip6_fib.c	2005-11-17 13:27:30.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/net/ipv6/ip6_fib.c	2005-11-17 13:31:16.000000000 +0100
-@@ -95,7 +95,7 @@ static __u32	rt_sernum	= 0;
- 
- static struct timer_list ip6_fib_timer = { function: fib6_run_gc };
- 
--static struct fib6_walker_t fib6_walker_list = {
-+struct fib6_walker_t fib6_walker_list = {
- 	&fib6_walker_list, &fib6_walker_list, 
- };
- 
-diff -rupN linux-2.4.32/net/ipv6/sysctl_net_ipv6.c linux-2.4.32.more-gcc4-fixes-v1/net/ipv6/sysctl_net_ipv6.c
---- linux-2.4.32/net/ipv6/sysctl_net_ipv6.c	2004-04-14 20:22:21.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/net/ipv6/sysctl_net_ipv6.c	2005-11-17 13:31:16.000000000 +0100
-@@ -31,17 +31,14 @@ ctl_table ipv6_table[] = {
- 
- #ifdef MODULE
- static struct ctl_table_header *ipv6_sysctl_header;
--static struct ctl_table ipv6_root_table[];
--static struct ctl_table ipv6_net_table[];
- 
--
--ctl_table ipv6_root_table[] = {
--	{CTL_NET, "net", NULL, 0, 0555, ipv6_net_table},
-+static ctl_table ipv6_net_table[] = {
-+	{NET_IPV6, "ipv6", NULL, 0, 0555, ipv6_table},
-         {0}
- };
- 
--ctl_table ipv6_net_table[] = {
--	{NET_IPV6, "ipv6", NULL, 0, 0555, ipv6_table},
-+static ctl_table ipv6_root_table[] = {
-+	{CTL_NET, "net", NULL, 0, 0555, ipv6_net_table},
-         {0}
- };
- 
-diff -rupN linux-2.4.32/net/irda/qos.c linux-2.4.32.more-gcc4-fixes-v1/net/irda/qos.c
---- linux-2.4.32/net/irda/qos.c	2003-11-29 00:28:15.000000000 +0100
-+++ linux-2.4.32.more-gcc4-fixes-v1/net/irda/qos.c	2005-11-17 13:31:16.000000000 +0100
-@@ -97,7 +97,7 @@ static int irlap_param_min_turn_time(voi
- 				     int get);
- 
- __u32 min_turn_times[]  = { 10000, 5000, 1000, 500, 100, 50, 10, 0 }; /* us */
--__u32 baud_rates[]      = { 2400, 9600, 19200, 38400, 57600, 115200, 576000, 
-+static __u32 baud_rates[] = { 2400, 9600, 19200, 38400, 57600, 115200, 576000, 
- 			    1152000, 4000000, 16000000 };           /* bps */
- __u32 data_sizes[]      = { 64, 128, 256, 512, 1024, 2048 };        /* bytes */
- __u32 add_bofs[]        = { 48, 24, 12, 5, 3, 2, 1, 0 };            /* bytes */
-diff -rupN linux-2.4.32/net/khttpd/prototypes.h linux-2.4.32.more-gcc4-fixes-v1/net/khttpd/prototypes.h
---- linux-2.4.32/net/khttpd/prototypes.h	2001-08-16 23:47:03.000000000 +0200
-+++ linux-2.4.32.more-gcc4-fixes-v1/net/khttpd/prototypes.h	2005-11-17 13:31:16.000000000 +0100
-@@ -49,7 +49,6 @@ extern int sysctl_khttpd_stop;
- extern struct khttpd_threadinfo threadinfo[CONFIG_KHTTPD_NUMCPU];
- extern char CurrentTime[];
- extern atomic_t ConnectCount;
--extern struct wait_queue main_wait[CONFIG_KHTTPD_NUMCPU];
- 
- /* misc.c */
- 
diff --git a/openwrt/target/linux/generic-2.4/patches/008-intel_flashchip_fix.patch b/openwrt/target/linux/generic-2.4/patches/008-intel_flashchip_fix.patch
deleted file mode 100644
index b2397f6249..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/008-intel_flashchip_fix.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-diff -urN linux.old/drivers/mtd/chips/cfi_cmdset_0001.c linux.dev/drivers/mtd/chips/cfi_cmdset_0001.c
---- linux.old/drivers/mtd/chips/cfi_cmdset_0001.c	2004-11-17 12:54:21.000000000 +0100
-+++ linux.dev/drivers/mtd/chips/cfi_cmdset_0001.c	2006-03-16 17:25:04.000000000 +0100
-@@ -28,10 +28,18 @@
- #include <linux/slab.h>
- #include <linux/delay.h>
- #include <linux/interrupt.h>
-+#include <linux/notifier.h>
-+#include <linux/reboot.h>
- #include <linux/mtd/map.h>
- #include <linux/mtd/cfi.h>
- #include <linux/mtd/compatmac.h>
- 
-+#ifndef container_of
-+#define container_of(ptr, type, member) ({                      \
-+		        const typeof( ((type *)0)->member ) *__mptr = (ptr);    \
-+			        (type *)( (char *)__mptr - offsetof(type,member) );})
-+#endif
-+
- // debugging, turns off buffer write mode #define FORCE_WORD_WRITE
- 
- static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
-@@ -45,6 +53,7 @@
- static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len);
- static int cfi_intelext_suspend (struct mtd_info *);
- static void cfi_intelext_resume (struct mtd_info *);
-+static int cfi_intelext_reboot(struct notifier_block *nb, unsigned long val, void *v);
- 
- static void cfi_intelext_destroy(struct mtd_info *);
- 
-@@ -288,6 +297,9 @@
- 	map->fldrv = &cfi_intelext_chipdrv;
- 	MOD_INC_USE_COUNT;
- 	mtd->name = map->name;
-+	mtd->reboot_notifier.notifier_call = cfi_intelext_reboot;
-+	register_reboot_notifier(&mtd->reboot_notifier);
-+
- 	return mtd;
- 
-  setup_err:
-@@ -1960,10 +1972,40 @@
- 	}
- }
- 
-+
-+static void cfi_intelext_reset(struct mtd_info *mtd)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	int i;
-+	struct flchip *chip;
-+
-+	cfi_intelext_sync(mtd);
-+	for (i=0; i<cfi->numchips; i++) {
-+		chip = &cfi->chips[i];
-+		
-+		spin_lock(chip->mutex);
-+		cfi_write(map, CMD(0xFF), 0);
-+		chip->state = FL_READY;
-+		spin_unlock(chip->mutex);
-+	}
-+}
-+
-+static int cfi_intelext_reboot(struct notifier_block *nb, unsigned long val, void *v)
-+{
-+	struct mtd_info *mtd;
-+
-+	mtd = container_of(nb, struct mtd_info, reboot_notifier);
-+	cfi_intelext_reset(mtd);
-+	return NOTIFY_DONE;
-+}
-+
- static void cfi_intelext_destroy(struct mtd_info *mtd)
- {
- 	struct map_info *map = mtd->priv;
- 	struct cfi_private *cfi = map->fldrv_priv;
-+	cfi_intelext_reset(mtd);
-+	unregister_reboot_notifier(&mtd->reboot_notifier);
- 	kfree(cfi->cmdset_priv);
- 	kfree(cfi->cfiq);
- 	kfree(cfi);
-diff -urN linux.old/include/linux/mtd/mtd.h linux.dev/include/linux/mtd/mtd.h
---- linux.old/include/linux/mtd/mtd.h	2003-08-25 13:44:44.000000000 +0200
-+++ linux.dev/include/linux/mtd/mtd.h	2006-03-16 17:00:10.000000000 +0100
-@@ -10,6 +10,7 @@
- #include <linux/version.h>
- #include <linux/types.h>
- #include <linux/mtd/compatmac.h>
-+#include <linux/notifier.h>
- #include <linux/module.h>
- #include <linux/uio.h>
- 
-@@ -217,6 +218,8 @@
- 	int (*suspend) (struct mtd_info *mtd);
- 	void (*resume) (struct mtd_info *mtd);
- 
-+	struct notifier_block reboot_notifier;
-+
- 	void *priv;
- };
- 
diff --git a/openwrt/target/linux/generic-2.4/patches/010-disable_old_squashfs_compatibility.patch b/openwrt/target/linux/generic-2.4/patches/010-disable_old_squashfs_compatibility.patch
deleted file mode 100644
index 8647652018..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/010-disable_old_squashfs_compatibility.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-diff -Nur linux-2.4.32/fs/squashfs/Makefile linux-2.4.32-owrt/fs/squashfs/Makefile
---- linux-2.4.32/fs/squashfs/Makefile	2006-03-21 13:47:50.000000000 +0100
-+++ linux-2.4.32-owrt/fs/squashfs/Makefile	2006-03-21 13:48:49.000000000 +0100
-@@ -4,7 +4,7 @@
- 
- O_TARGET := squashfs.o
- 
--obj-y  := inode.o squashfs2_0.o LzmaDecode.o
-+obj-y  := inode.o LzmaDecode.o
- 
- obj-m := $(O_TARGET)
- 
-diff -Nur linux-2.4.32/fs/squashfs/squashfs.h linux-2.4.32-owrt/fs/squashfs/squashfs.h
---- linux-2.4.32/fs/squashfs/squashfs.h	2006-03-21 13:06:10.000000000 +0100
-+++ linux-2.4.32-owrt/fs/squashfs/squashfs.h	2006-03-21 13:48:36.000000000 +0100
-@@ -24,6 +24,9 @@
- #ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
- #undef CONFIG_SQUASHFS_1_0_COMPATIBILITY
- #endif
-+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+#undef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+#endif
- #ifdef SQUASHFS_TRACE
- #define TRACE(s, args...)	printk(KERN_NOTICE "SQUASHFS: "s, ## args)
- #else
diff --git a/openwrt/target/linux/generic-2.4/patches/050-build_flags.patch b/openwrt/target/linux/generic-2.4/patches/050-build_flags.patch
deleted file mode 100644
index 14a207df23..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/050-build_flags.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-diff -ur linux-2.4.32/arch/mips/Makefile linux-2.4.32-openwrt/arch/mips/Makefile
---- linux-2.4.32/arch/mips/Makefile	2005-12-15 13:53:59.000000000 +0100
-+++ linux-2.4.32-openwrt/arch/mips/Makefile	2005-12-15 14:02:33.000000000 +0100
-@@ -44,10 +44,10 @@
- GCCFLAGS	:= -I $(TOPDIR)/include/asm/gcc
- GCCFLAGS	+= -G 0 -mno-abicalls -fno-pic -pipe
- GCCFLAGS	+= $(call check_gcc, -finline-limit=100000,)
--LINKFLAGS	+= -G 0 -static -n
--MODFLAGS	+= -mlong-calls
-+LINKFLAGS	+= -G 0 -static -n -nostdlib
-+MODFLAGS	+= -mlong-calls -fno-common
- 
--ifdef CONFIG_DEBUG_INFO
-+ifdef CONFIG_REMOTE_DEBUG
- GCCFLAGS	+= -g
- ifdef CONFIG_SB1XXX_CORELIS
- GCCFLAGS	+= -mno-sched-prolog -fno-omit-frame-pointer
-@@ -69,13 +69,13 @@
- set_gccflags = $(shell \
- while :; do \
- 	cpu=$(1); isa=-$(2); \
--	for gcc_opt in -march= -mcpu=; do \
-+	for gcc_opt in -march= -mtune=; do \
- 		$(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- 			-xc /dev/null > /dev/null 2>&1 && \
- 			break 2; \
- 	done; \
- 	cpu=$(3); isa=-$(4); \
--	for gcc_opt in -march= -mcpu=; do \
-+	for gcc_opt in -march= -mtune=; do \
- 		$(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- 			-xc /dev/null > /dev/null 2>&1 && \
- 			break 2; \
-@@ -90,7 +90,7 @@
- fi; \
- gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
- while :; do \
--	for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
-+	for gas_opt in -Wa,-march= -Wa,-mtune=; do \
- 		$(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
- 			-o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
- 			break 2; \
-@@ -172,6 +172,7 @@
- endif
- 
- AFLAGS		+= $(GCCFLAGS)
-+ASFLAGS		+= $(GCCFLAGS)
- CFLAGS		+= $(GCCFLAGS)
- 
- LD		+= -m $(ld-emul)
-diff -ur linux-2.4.32/Makefile linux-2.4.32-openwrt/Makefile
---- linux-2.4.32/Makefile	2005-12-15 13:53:59.000000000 +0100
-+++ linux-2.4.32-openwrt/Makefile	2005-12-15 13:59:30.000000000 +0100
-@@ -17,7 +17,7 @@
- FINDHPATH	= $(HPATH)/asm $(HPATH)/linux $(HPATH)/scsi $(HPATH)/net $(HPATH)/math-emu
- 
- HOSTCC  	= gcc
--HOSTCFLAGS	= -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
-+HOSTCFLAGS	= -Wall -Wstrict-prototypes -Os -fomit-frame-pointer
- 
- CROSS_COMPILE 	=
- 
-@@ -88,10 +88,9 @@
- #
- # standard CFLAGS
- #
--
- CPPFLAGS := -D__KERNEL__ -I$(HPATH)
- 
--CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
-+CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
- 	  -fno-strict-aliasing -fno-common
- CFLAGS += -fno-builtin-sprintf
- ifndef CONFIG_FRAME_POINTER
-@@ -104,6 +103,8 @@
- # disable pointer signedness warnings in gcc 4.0
- CFLAGS += $(call check_gcc,-Wno-pointer-sign,)
- 
-+CFLAGS += $(call check_gcc, -funit-at-a-time,)
-+
- #
- # ROOT_DEV specifies the default root-device when making the image.
- # This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
diff --git a/openwrt/target/linux/generic-2.4/patches/100-wireless-extension.patch b/openwrt/target/linux/generic-2.4/patches/100-wireless-extension.patch
deleted file mode 100644
index 88e91831ff..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/100-wireless-extension.patch
+++ /dev/null
@@ -1,1121 +0,0 @@
-diff -Nur linux-2.4.32/include/linux/netdevice.h linux-2.4.32-we/include/linux/netdevice.h
---- linux-2.4.32/include/linux/netdevice.h	2004-11-17 12:54:22.000000000 +0100
-+++ linux-2.4.32-we/include/linux/netdevice.h	2006-03-13 12:10:57.000000000 +0100
-@@ -295,7 +295,9 @@
- 
- 	/* List of functions to handle Wireless Extensions (instead of ioctl).
- 	 * See <net/iw_handler.h> for details. Jean II */
--	struct iw_handler_def *	wireless_handlers;
-+	const struct iw_handler_def *	wireless_handlers;
-+	/* Instance data managed by the core of Wireless Extensions. */
-+	struct iw_public_data *	wireless_data;
- 
- 	struct ethtool_ops *ethtool_ops;
- 
-diff -Nur linux-2.4.32/include/linux/wireless.h linux-2.4.32-we/include/linux/wireless.h
---- linux-2.4.32/include/linux/wireless.h	2003-11-28 19:26:21.000000000 +0100
-+++ linux-2.4.32-we/include/linux/wireless.h	2006-03-13 12:11:02.000000000 +0100
-@@ -1,10 +1,10 @@
- /*
-  * This file define a set of standard wireless extensions
-  *
-- * Version :	16	2.4.03
-+ * Version :	18	12.3.05
-  *
-  * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
-- * Copyright (c) 1997-2002 Jean Tourrilhes, All Rights Reserved.
-+ * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved.
-  */
- 
- #ifndef _LINUX_WIRELESS_H
-@@ -47,12 +47,12 @@
-  *	# include/net/iw_handler.h
-  *
-  * Note as well that /proc/net/wireless implementation has now moved in :
-- *	# include/linux/wireless.c
-+ *	# net/core/wireless.c
-  *
-  * Wireless Events (2002 -> onward) :
-  * --------------------------------
-  * Events are defined at the end of this file, and implemented in :
-- *	# include/linux/wireless.c
-+ *	# net/core/wireless.c
-  *
-  * Other comments :
-  * --------------
-@@ -82,7 +82,7 @@
-  * (there is some stuff that will be added in the future...)
-  * I just plan to increment with each new version.
-  */
--#define WIRELESS_EXT	16
-+#define WIRELESS_EXT	18
- 
- /*
-  * Changes :
-@@ -175,6 +175,28 @@
-  *	- Remove IW_MAX_GET_SPY because conflict with enhanced spy support
-  *	- Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
-  *	- Add IW_ENCODE_TEMP and iw_range->encoding_login_index
-+ *
-+ * V16 to V17
-+ * ----------
-+ *	- Add flags to frequency -> auto/fixed
-+ *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
-+ *	- Wireless Event capability in struct iw_range
-+ *	- Add support for relative TxPower (yick !)
-+ *
-+ * V17 to V18 (From Jouni Malinen <jkmaline@cc.hut.fi>)
-+ * ----------
-+ *	- Add support for WPA/WPA2
-+ *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
-+ *	  SIOCGIWENCODEEXT)
-+ *	- Add SIOCSIWGENIE/SIOCGIWGENIE
-+ *	- Add SIOCSIWMLME
-+ *	- Add SIOCSIWPMKSA
-+ *	- Add struct iw_range bit field for supported encoding capabilities
-+ *	- Add optional scan request parameters for SIOCSIWSCAN
-+ *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
-+ *	  related parameters (extensible up to 4096 parameter values)
-+ *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
-+ *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
-  */
- 
- /**************************** CONSTANTS ****************************/
-@@ -249,9 +271,33 @@
- #define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
- #define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
- 
-+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
-+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
-+ * fields. More than one IE may be included in the request. Setting the generic
-+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
-+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
-+ * are required to report the used IE as a wireless event, e.g., when
-+ * associating with an AP. */
-+#define SIOCSIWGENIE	0x8B30		/* set generic IE */
-+#define SIOCGIWGENIE	0x8B31		/* get generic IE */
-+
-+/* WPA : IEEE 802.11 MLME requests */
-+#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
-+					 * struct iw_mlme */
-+/* WPA : Authentication mode parameters */
-+#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
-+#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
-+
-+/* WPA : Extended version of encoding configuration */
-+#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
-+#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
-+
-+/* WPA2 : PMKSA cache management */
-+#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
-+
- /* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
- 
--/* These 16 ioctl are wireless device private.
-+/* These 32 ioctl are wireless device private, for 16 commands.
-  * Each driver is free to use them for whatever purpose it chooses,
-  * however the driver *must* export the description of those ioctls
-  * with SIOCGIWPRIV and *must* use arguments as defined below.
-@@ -266,8 +312,8 @@
-  * We now have 32 commands, so a bit more space ;-).
-  * Also, all 'odd' commands are only usable by root and don't return the
-  * content of ifr/iwr to user (but you are not obliged to use the set/get
-- * convention, just use every other two command).
-- * And I repeat : you are not obliged to use them with iwspy, but you
-+ * convention, just use every other two command). More details in iwpriv.c.
-+ * And I repeat : you are not forced to use them with iwpriv, but you
-  * must be compliant with it.
-  */
- 
-@@ -290,6 +336,34 @@
- #define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
- #define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
- #define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
-+#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
-+					 * (scan results); This includes id and
-+					 * length fields. One IWEVGENIE may
-+					 * contain more than one IE. Scan
-+					 * results may contain one or more
-+					 * IWEVGENIE events. */
-+#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
-+					 * (struct iw_michaelmicfailure)
-+					 */
-+#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
-+					 * The data includes id and length
-+					 * fields and may contain more than one
-+					 * IE. This event is required in
-+					 * Managed mode if the driver
-+					 * generates its own WPA/RSN IE. This
-+					 * should be sent just before
-+					 * IWEVREGISTERED event for the
-+					 * association. */
-+#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
-+					 * Response. The data includes id and
-+					 * length fields and may contain more
-+					 * than one IE. This may be sent
-+					 * between IWEVASSOCREQIE and
-+					 * IWEVREGISTERED events for the
-+					 * association. */
-+#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
-+					 * pre-authentication
-+					 * (struct iw_pmkid_cand) */
- 
- #define IWEVFIRST	0x8C00
- 
-@@ -352,6 +426,18 @@
- #define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
- #define IW_MODE_MONITOR	6	/* Passive monitor (listen only) */
- 
-+/* Statistics flags (bitmask in updated) */
-+#define IW_QUAL_QUAL_UPDATED	0x1	/* Value was updated since last read */
-+#define IW_QUAL_LEVEL_UPDATED	0x2
-+#define IW_QUAL_NOISE_UPDATED	0x4
-+#define IW_QUAL_QUAL_INVALID	0x10	/* Driver doesn't provide value */
-+#define IW_QUAL_LEVEL_INVALID	0x20
-+#define IW_QUAL_NOISE_INVALID	0x40
-+
-+/* Frequency flags */
-+#define IW_FREQ_AUTO		0x00	/* Let the driver decides */
-+#define IW_FREQ_FIXED		0x01	/* Force a specific value */
-+
- /* Maximum number of size of encoding token available
-  * they are listed in the range structure */
- #define IW_MAX_ENCODING_SIZES	8
-@@ -390,6 +476,7 @@
- #define IW_TXPOW_TYPE		0x00FF	/* Type of value */
- #define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
- #define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
-+#define IW_TXPOW_RELATIVE	0x0002	/* Value is in arbitrary units */
- #define IW_TXPOW_RANGE		0x1000	/* Range of value between min/max */
- 
- /* Retry limits and lifetime flags available */
-@@ -412,12 +499,113 @@
- #define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
- #define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
- #define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
-+/* struct iw_scan_req scan_type */
-+#define IW_SCAN_TYPE_ACTIVE 0
-+#define IW_SCAN_TYPE_PASSIVE 1
- /* Maximum size of returned data */
- #define IW_SCAN_MAX_DATA	4096	/* In bytes */
- 
- /* Max number of char in custom event - use multiple of them if needed */
- #define IW_CUSTOM_MAX		256	/* In bytes */
- 
-+/* Generic information element */
-+#define IW_GENERIC_IE_MAX	1024
-+
-+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
-+#define IW_MLME_DEAUTH		0
-+#define IW_MLME_DISASSOC	1
-+
-+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
-+#define IW_AUTH_INDEX		0x0FFF
-+#define IW_AUTH_FLAGS		0xF000
-+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
-+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
-+ * parameter that is being set/get to; value will be read/written to
-+ * struct iw_param value field) */
-+#define IW_AUTH_WPA_VERSION		0
-+#define IW_AUTH_CIPHER_PAIRWISE		1
-+#define IW_AUTH_CIPHER_GROUP		2
-+#define IW_AUTH_KEY_MGMT		3
-+#define IW_AUTH_TKIP_COUNTERMEASURES	4
-+#define IW_AUTH_DROP_UNENCRYPTED	5
-+#define IW_AUTH_80211_AUTH_ALG		6
-+#define IW_AUTH_WPA_ENABLED		7
-+#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
-+#define IW_AUTH_ROAMING_CONTROL		9
-+#define IW_AUTH_PRIVACY_INVOKED		10
-+
-+/* IW_AUTH_WPA_VERSION values (bit field) */
-+#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
-+#define IW_AUTH_WPA_VERSION_WPA		0x00000002
-+#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
-+
-+/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */
-+#define IW_AUTH_CIPHER_NONE	0x00000001
-+#define IW_AUTH_CIPHER_WEP40	0x00000002
-+#define IW_AUTH_CIPHER_TKIP	0x00000004
-+#define IW_AUTH_CIPHER_CCMP	0x00000008
-+#define IW_AUTH_CIPHER_WEP104	0x00000010
-+
-+/* IW_AUTH_KEY_MGMT values (bit field) */
-+#define IW_AUTH_KEY_MGMT_802_1X	1
-+#define IW_AUTH_KEY_MGMT_PSK	2
-+
-+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
-+#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
-+#define IW_AUTH_ALG_SHARED_KEY	0x00000002
-+#define IW_AUTH_ALG_LEAP	0x00000004
-+
-+/* IW_AUTH_ROAMING_CONTROL values */
-+#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
-+#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
-+					 * control */
-+
-+/* SIOCSIWENCODEEXT definitions */
-+#define IW_ENCODE_SEQ_MAX_SIZE	8
-+/* struct iw_encode_ext ->alg */
-+#define IW_ENCODE_ALG_NONE	0
-+#define IW_ENCODE_ALG_WEP	1
-+#define IW_ENCODE_ALG_TKIP	2
-+#define IW_ENCODE_ALG_CCMP	3
-+/* struct iw_encode_ext ->ext_flags */
-+#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
-+#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
-+#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
-+#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
-+
-+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
-+#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
-+#define IW_MICFAILURE_GROUP	0x00000004
-+#define IW_MICFAILURE_PAIRWISE	0x00000008
-+#define IW_MICFAILURE_STAKEY	0x00000010
-+#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
-+					    */
-+
-+/* Bit field values for enc_capa in struct iw_range */
-+#define IW_ENC_CAPA_WPA		0x00000001
-+#define IW_ENC_CAPA_WPA2	0x00000002
-+#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
-+#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
-+
-+/* Event capability macros - in (struct iw_range *)->event_capa
-+ * Because we have more than 32 possible events, we use an array of
-+ * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
-+#define IW_EVENT_CAPA_BASE(cmd)		((cmd >= SIOCIWFIRSTPRIV) ? \
-+					 (cmd - SIOCIWFIRSTPRIV + 0x60) : \
-+					 (cmd - SIOCSIWCOMMIT))
-+#define IW_EVENT_CAPA_INDEX(cmd)	(IW_EVENT_CAPA_BASE(cmd) >> 5)
-+#define IW_EVENT_CAPA_MASK(cmd)		(1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
-+/* Event capability constants - event autogenerated by the kernel
-+ * This list is valid for most 802.11 devices, customise as needed... */
-+#define IW_EVENT_CAPA_K_0	(IW_EVENT_CAPA_MASK(0x8B04) | \
-+				 IW_EVENT_CAPA_MASK(0x8B06) | \
-+				 IW_EVENT_CAPA_MASK(0x8B1A))
-+#define IW_EVENT_CAPA_K_1	(IW_EVENT_CAPA_MASK(0x8B2A))
-+/* "Easy" macro to set events in iw_range (less efficient) */
-+#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
-+#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
-+
-+
- /****************************** TYPES ******************************/
- 
- /* --------------------------- SUBTYPES --------------------------- */
-@@ -456,7 +644,7 @@
- 	__s32		m;		/* Mantissa */
- 	__s16		e;		/* Exponent */
- 	__u8		i;		/* List index (when in range struct) */
--	__u8		pad;		/* Unused - just for alignement */
-+	__u8		flags;		/* Flags (fixed/auto) */
- };
- 
- /*
-@@ -507,6 +695,132 @@
- 	struct iw_quality	high;		/* High threshold */
- };
- 
-+/*
-+ *	Optional data for scan request
-+ *
-+ *	Note: these optional parameters are controlling parameters for the
-+ *	scanning behavior, these do not apply to getting scan results
-+ *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
-+ *	provide a merged results with all BSSes even if the previous scan
-+ *	request limited scanning to a subset, e.g., by specifying an SSID.
-+ *	Especially, scan results are required to include an entry for the
-+ *	current BSS if the driver is in Managed mode and associated with an AP.
-+ */
-+struct	iw_scan_req
-+{
-+	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
-+	__u8		essid_len;
-+	__u8		num_channels; /* num entries in channel_list;
-+				       * 0 = scan all allowed channels */
-+	__u8		flags; /* reserved as padding; use zero, this may
-+				* be used in the future for adding flags
-+				* to request different scan behavior */
-+	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
-+				* individual address of a specific BSS */
-+
-+	/*
-+	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
-+	 * the current ESSID. This allows scan requests for specific ESSID
-+	 * without having to change the current ESSID and potentially breaking
-+	 * the current association.
-+	 */
-+	__u8		essid[IW_ESSID_MAX_SIZE];
-+
-+	/*
-+	 * Optional parameters for changing the default scanning behavior.
-+	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
-+	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
-+	 * reasonable default values. min_channel_time defines the time that
-+	 * will be used to wait for the first reply on each channel. If no
-+	 * replies are received, next channel will be scanned after this. If
-+	 * replies are received, total time waited on the channel is defined by
-+	 * max_channel_time.
-+	 */
-+	__u32		min_channel_time; /* in TU */
-+	__u32		max_channel_time; /* in TU */
-+
-+	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
-+};
-+
-+/* ------------------------- WPA SUPPORT ------------------------- */
-+
-+/*
-+ *	Extended data structure for get/set encoding (this is used with
-+ *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
-+ *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
-+ *	only the data contents changes (key data -> this structure, including
-+ *	key data).
-+ *
-+ *	If the new key is the first group key, it will be set as the default
-+ *	TX key. Otherwise, default TX key index is only changed if
-+ *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
-+ *
-+ *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
-+ *	special "change TX key index" operation which is indicated by setting
-+ *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
-+ *
-+ *	tx_seq/rx_seq are only used when respective
-+ *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
-+ *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
-+ *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
-+ *	used only by an Authenticator (AP or an IBSS station) to get the
-+ *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
-+ *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
-+ *	debugging/testing.
-+ */
-+struct	iw_encode_ext
-+{
-+	__u32		ext_flags; /* IW_ENCODE_EXT_* */
-+	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-+	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-+	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
-+			       * (group) keys or unicast address for
-+			       * individual keys */
-+	__u16		alg; /* IW_ENCODE_ALG_* */
-+	__u16		key_len;
-+	__u8		key[0];
-+};
-+
-+/* SIOCSIWMLME data */
-+struct	iw_mlme
-+{
-+	__u16		cmd; /* IW_MLME_* */
-+	__u16		reason_code;
-+	struct sockaddr	addr;
-+};
-+
-+/* SIOCSIWPMKSA data */
-+#define IW_PMKSA_ADD		1
-+#define IW_PMKSA_REMOVE		2
-+#define IW_PMKSA_FLUSH		3
-+
-+#define IW_PMKID_LEN	16
-+
-+struct	iw_pmksa
-+{
-+	__u32		cmd; /* IW_PMKSA_* */
-+	struct sockaddr	bssid;
-+	__u8		pmkid[IW_PMKID_LEN];
-+};
-+
-+/* IWEVMICHAELMICFAILURE data */
-+struct	iw_michaelmicfailure
-+{
-+	__u32		flags;
-+	struct sockaddr	src_addr;
-+	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-+};
-+
-+/* IWEVPMKIDCAND data */
-+#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
-+struct	iw_pmkid_cand
-+{
-+	__u32		flags; /* IW_PMKID_CAND_* */
-+	__u32		index; /* the smaller the index, the higher the
-+				* priority */
-+	struct sockaddr	bssid;
-+};
-+
- /* ------------------------ WIRELESS STATS ------------------------ */
- /*
-  * Wireless statistics (used for /proc/net/wireless)
-@@ -610,11 +924,12 @@
- 	/* Old Frequency (backward compat - moved lower ) */
- 	__u16		old_num_channels;
- 	__u8		old_num_frequency;
--	/* Filler to keep "version" at the same offset */
--	__s32		old_freq[6];
-+
-+	/* Wireless event capability bitmasks */
-+	__u32		event_capa[6];
- 
- 	/* signal level threshold range */
--	__s32	sensitivity;
-+	__s32		sensitivity;
- 
- 	/* Quality of link & SNR stuff */
- 	/* Quality range (link, level, noise)
-@@ -685,6 +1000,8 @@
- 	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
- 	/* Note : this frequency list doesn't need to fit channel numbers,
- 	 * because each entry contain its channel index */
-+
-+	__u32		enc_capa; /* IW_ENC_CAPA_* bit field */
- };
- 
- /*
-diff -Nur linux-2.4.32/include/net/iw_handler.h linux-2.4.32-we/include/net/iw_handler.h
---- linux-2.4.32/include/net/iw_handler.h	2003-11-28 19:26:21.000000000 +0100
-+++ linux-2.4.32-we/include/net/iw_handler.h	2006-03-13 12:10:57.000000000 +0100
-@@ -1,10 +1,10 @@
- /*
-  * This file define the new driver API for Wireless Extensions
-  *
-- * Version :	5	4.12.02
-+ * Version :	6	21.6.04
-  *
-  * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
-- * Copyright (c) 2001-2002 Jean Tourrilhes, All Rights Reserved.
-+ * Copyright (c) 2001-2004 Jean Tourrilhes, All Rights Reserved.
-  */
- 
- #ifndef _IW_HANDLER_H
-@@ -206,7 +206,7 @@
-  * will be needed...
-  * I just plan to increment with each new version.
-  */
--#define IW_HANDLER_VERSION	5
-+#define IW_HANDLER_VERSION	6
- 
- /*
-  * Changes :
-@@ -224,11 +224,18 @@
-  * V4 to V5
-  * --------
-  *	- Add new spy support : struct iw_spy_data & prototypes
-+ *
-+ * V5 to V6
-+ * --------
-+ *	- Change the way we get to spy_data method for added safety
-+ *	- Remove spy #ifdef, they are always on -> cleaner code
-+ *	- Add IW_DESCR_FLAG_NOMAX flag for very large requests
-+ *	- Start migrating get_wireless_stats to struct iw_handler_def
-  */
- 
- /**************************** CONSTANTS ****************************/
- 
--/* Enable enhanced spy support. Disable to reduce footprint */
-+/* Enhanced spy support available */
- #define IW_WIRELESS_SPY
- #define IW_WIRELESS_THRSPY
- 
-@@ -258,6 +265,7 @@
- #define IW_DESCR_FLAG_EVENT	0x0002	/* Generate an event on SET */
- #define IW_DESCR_FLAG_RESTRICT	0x0004	/* GET : request is ROOT only */
- 				/* SET : Omit payload from generated iwevent */
-+#define IW_DESCR_FLAG_NOMAX	0x0008	/* GET : no limit on request size */
- /* Driver level flags */
- #define IW_DESCR_FLAG_WAIT	0x0100	/* Wait for driver event */
- 
-@@ -311,23 +319,25 @@
- 	/* Array of handlers for standard ioctls
- 	 * We will call dev->wireless_handlers->standard[ioctl - SIOCSIWNAME]
- 	 */
--	iw_handler *		standard;
-+	const iw_handler *	standard;
- 
- 	/* Array of handlers for private ioctls
- 	 * Will call dev->wireless_handlers->private[ioctl - SIOCIWFIRSTPRIV]
- 	 */
--	iw_handler *		private;
-+	const iw_handler *	private;
- 
- 	/* Arguments of private handler. This one is just a list, so you
- 	 * can put it in any order you want and should not leave holes...
- 	 * We will automatically export that to user space... */
--	struct iw_priv_args *	private_args;
-+	const struct iw_priv_args *	private_args;
- 
--	/* Driver enhanced spy support */
--	long			spy_offset;	/* Spy data offset */
-+	/* This field will be *removed* in the next version of WE */
-+	long			spy_offset;	/* DO NOT USE */
- 
--	/* In the long term, get_wireless_stats will move from
--	 * 'struct net_device' to here, to minimise bloat. */
-+	/* New location of get_wireless_stats, to de-bloat struct net_device.
-+	 * The old pointer in struct net_device will be gradually phased
-+	 * out, and drivers are encouraged to use this one... */
-+	struct iw_statistics*	(*get_wireless_stats)(struct net_device *dev);
- };
- 
- /* ---------------------- IOCTL DESCRIPTION ---------------------- */
-@@ -374,18 +384,29 @@
-  */
- struct iw_spy_data
- {
--#ifdef IW_WIRELESS_SPY
- 	/* --- Standard spy support --- */
- 	int			spy_number;
- 	u_char			spy_address[IW_MAX_SPY][ETH_ALEN];
- 	struct iw_quality	spy_stat[IW_MAX_SPY];
--#ifdef IW_WIRELESS_THRSPY
- 	/* --- Enhanced spy support (event) */
- 	struct iw_quality	spy_thr_low;	/* Low threshold */
- 	struct iw_quality	spy_thr_high;	/* High threshold */
- 	u_char			spy_thr_under[IW_MAX_SPY];
--#endif /* IW_WIRELESS_THRSPY */
--#endif /* IW_WIRELESS_SPY */
-+};
-+
-+/* --------------------- DEVICE WIRELESS DATA --------------------- */
-+/*
-+ * This is all the wireless data specific to a device instance that
-+ * is managed by the core of Wireless Extensions.
-+ * We only keep pointer to those structures, so that a driver is free
-+ * to share them between instances.
-+ * This structure should be initialised before registering the device.
-+ * Access to this data follow the same rules as any other struct net_device
-+ * data (i.e. valid as long as struct net_device exist, same locking rules).
-+ */
-+struct iw_public_data {
-+	/* Driver enhanced spy support */
-+	struct iw_spy_data *	spy_data;
- };
- 
- /**************************** PROTOTYPES ****************************/
-diff -Nur linux-2.4.32/net/core/dev.c linux-2.4.32-we/net/core/dev.c
---- linux-2.4.32/net/core/dev.c	2005-04-04 03:42:20.000000000 +0200
-+++ linux-2.4.32-we/net/core/dev.c	2006-03-13 12:10:57.000000000 +0100
-@@ -2426,7 +2426,7 @@
- 				/* Follow me in net/core/wireless.c */
- 				ret = wireless_process_ioctl(&ifr, cmd);
- 				rtnl_unlock();
--				if (!ret && IW_IS_GET(cmd) &&
-+				if (IW_IS_GET(cmd) &&
- 				    copy_to_user(arg, &ifr, sizeof(struct ifreq)))
- 					return -EFAULT;
- 				return ret;
-diff -Nur linux-2.4.32/net/core/wireless.c linux-2.4.32-we/net/core/wireless.c
---- linux-2.4.32/net/core/wireless.c	2003-11-28 19:26:21.000000000 +0100
-+++ linux-2.4.32-we/net/core/wireless.c	2006-03-13 12:11:02.000000000 +0100
-@@ -2,7 +2,7 @@
-  * This file implement the Wireless Extensions APIs.
-  *
-  * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
-- * Copyright (c) 1997-2003 Jean Tourrilhes, All Rights Reserved.
-+ * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved.
-  *
-  * (As all part of the Linux kernel, this file is GPL)
-  */
-@@ -48,6 +48,16 @@
-  *	o Add common spy support : iw_handler_set_spy(), wireless_spy_update()
-  *	o Add enhanced spy support : iw_handler_set_thrspy() and event.
-  *	o Add WIRELESS_EXT version display in /proc/net/wireless
-+ *
-+ * v6 - 18.06.04 - Jean II
-+ *	o Change get_spydata() method for added safety
-+ *	o Remove spy #ifdef, they are always on -> cleaner code
-+ *	o Allow any size GET request if user specifies length > max
-+ *		and if request has IW_DESCR_FLAG_NOMAX flag or is SIOCGIWPRIV
-+ *	o Start migrating get_wireless_stats to struct iw_handler_def
-+ *	o Add wmb() in iw_handler_set_spy() for non-coherent archs/cpus
-+ * Based on patch from Pavel Roskin <proski@gnu.org> :
-+ *	o Fix kernel data leak to user space in private handler handling
-  */
- 
- /***************************** INCLUDES *****************************/
-@@ -64,11 +74,7 @@
- 
- /**************************** CONSTANTS ****************************/
- 
--/* Enough lenience, let's make sure things are proper... */
--#define WE_STRICT_WRITE		/* Check write buffer size */
--/* I'll probably drop both the define and kernel message in the next version */
--
--/* Debuging stuff */
-+/* Debugging stuff */
- #undef WE_IOCTL_DEBUG		/* Debug IOCTL API */
- #undef WE_EVENT_DEBUG		/* Debug Event dispatcher */
- #undef WE_SPY_DEBUG		/* Debug enhanced spy support */
-@@ -131,14 +137,14 @@
- 	{ IW_HEADER_TYPE_ADDR, 0, 0, 0, 0, 0},
- 	/* SIOCGIWAP */
- 	{ IW_HEADER_TYPE_ADDR, 0, 0, 0, 0, IW_DESCR_FLAG_DUMP},
--	/* -- hole -- */
--	{ IW_HEADER_TYPE_NULL, 0, 0, 0, 0, 0},
-+	/* SIOCSIWMLME */
-+	{ IW_HEADER_TYPE_POINT, 0, 1, sizeof(struct iw_mlme), sizeof(struct iw_mlme), 0},
- 	/* SIOCGIWAPLIST */
--	{ IW_HEADER_TYPE_POINT, 0, (sizeof(struct sockaddr) + sizeof(struct iw_quality)), 0, IW_MAX_AP, 0},
-+	{ IW_HEADER_TYPE_POINT, 0, (sizeof(struct sockaddr) + sizeof(struct iw_quality)), 0, IW_MAX_AP, IW_DESCR_FLAG_NOMAX},
- 	/* SIOCSIWSCAN */
--	{ IW_HEADER_TYPE_PARAM, 0, 0, 0, 0, 0},
-+	{ IW_HEADER_TYPE_POINT, 0, 1, 0, sizeof(struct iw_scan_req), 0},
- 	/* SIOCGIWSCAN */
--	{ IW_HEADER_TYPE_POINT, 0, 1, 0, IW_SCAN_MAX_DATA, 0},
-+	{ IW_HEADER_TYPE_POINT, 0, 1, 0, IW_SCAN_MAX_DATA, IW_DESCR_FLAG_NOMAX},
- 	/* SIOCSIWESSID */
- 	{ IW_HEADER_TYPE_POINT, 0, 1, 0, IW_ESSID_MAX_SIZE + 1, IW_DESCR_FLAG_EVENT},
- 	/* SIOCGIWESSID */
-@@ -179,6 +185,25 @@
- 	{ IW_HEADER_TYPE_PARAM, 0, 0, 0, 0, 0},
- 	/* SIOCGIWPOWER */
- 	{ IW_HEADER_TYPE_PARAM, 0, 0, 0, 0, 0},
-+	/* -- hole -- */
-+	{ IW_HEADER_TYPE_NULL, 0, 0, 0, 0, 0},
-+	/* -- hole -- */
-+	{ IW_HEADER_TYPE_NULL, 0, 0, 0, 0, 0},
-+	/* SIOCSIWGENIE */
-+	{ IW_HEADER_TYPE_POINT, 0, 1, 0, IW_GENERIC_IE_MAX, 0},
-+	/* SIOCGIWGENIE */
-+	{ IW_HEADER_TYPE_POINT, 0, 1, 0, IW_GENERIC_IE_MAX, 0},
-+	/* SIOCSIWAUTH */
-+	{ IW_HEADER_TYPE_PARAM, 0, 0, 0, 0, 0},
-+	/* SIOCGIWAUTH */
-+	{ IW_HEADER_TYPE_PARAM, 0, 0, 0, 0, 0},
-+	/* SIOCSIWENCODEEXT */
-+	{ IW_HEADER_TYPE_POINT, 0, 1, sizeof(struct iw_encode_ext), sizeof(struct iw_encode_ext) + IW_ENCODING_TOKEN_MAX, 0},
-+	/* SIOCGIWENCODEEXT */
-+	{ IW_HEADER_TYPE_POINT, 0, 1, sizeof(struct iw_encode_ext), sizeof(struct iw_encode_ext) + IW_ENCODING_TOKEN_MAX, 0},
-+	/* SIOCSIWPMKSA */
-+	{ IW_HEADER_TYPE_POINT, 0, 1, sizeof(struct iw_pmksa), sizeof(struct iw_pmksa), 0},
-+	/* -- hole -- */
- };
- static const int standard_ioctl_num = (sizeof(standard_ioctl) /
- 				       sizeof(struct iw_ioctl_description));
-@@ -198,12 +223,22 @@
- 	{ IW_HEADER_TYPE_ADDR, 0, 0, 0, 0, 0},
- 	/* IWEVEXPIRED */
- 	{ IW_HEADER_TYPE_ADDR, 0, 0, 0, 0, 0},
-+	/* IWEVGENIE */
-+	{ IW_HEADER_TYPE_POINT, 0, 1, 0, IW_GENERIC_IE_MAX, 0},
-+	/* IWEVMICHAELMICFAILURE */
-+	{ IW_HEADER_TYPE_POINT, 0, 1, 0, sizeof(struct iw_michaelmicfailure), 0},
-+	/* IWEVASSOCREQIE */
-+	{ IW_HEADER_TYPE_POINT, 0, 1, 0, IW_GENERIC_IE_MAX, 0},
-+	/* IWEVASSOCRESPIE */
-+	{ IW_HEADER_TYPE_POINT, 0, 1, 0, IW_GENERIC_IE_MAX, 0},
-+	/* IWEVPMKIDCAND */
-+	{ IW_HEADER_TYPE_POINT, 0, 1, 0, sizeof(struct iw_pmkid_cand), 0},
- };
- static const int standard_event_num = (sizeof(standard_event) /
- 				       sizeof(struct iw_ioctl_description));
- 
- /* Size (in bytes) of the various private data types */
--static const char priv_type_size[] = {
-+static const char iw_priv_type_size[] = {
- 	0,				/* IW_PRIV_TYPE_NONE */
- 	1,				/* IW_PRIV_TYPE_BYTE */
- 	1,				/* IW_PRIV_TYPE_CHAR */
-@@ -270,12 +305,15 @@
-  */
- static inline struct iw_statistics *get_wireless_stats(struct net_device *dev)
- {
-+	/* New location */
-+	if((dev->wireless_handlers != NULL) &&
-+	   (dev->wireless_handlers->get_wireless_stats != NULL))
-+		return dev->wireless_handlers->get_wireless_stats(dev);
-+
-+	/* Old location, will be phased out in next WE */
- 	return (dev->get_wireless_stats ?
- 		dev->get_wireless_stats(dev) :
- 		(struct iw_statistics *) NULL);
--	/* In the future, get_wireless_stats may move from 'struct net_device'
--	 * to 'struct iw_handler_def', to de-bloat struct net_device.
--	 * Definitely worse a thought... */
- }
- 
- /* ---------------------------------------------------------------- */
-@@ -310,14 +348,32 @@
- 
- /* ---------------------------------------------------------------- */
- /*
-- * Number of private arguments
-+ * Calculate size of private arguments
-  */
- static inline int get_priv_size(__u16	args)
- {
- 	int	num = args & IW_PRIV_SIZE_MASK;
- 	int	type = (args & IW_PRIV_TYPE_MASK) >> 12;
- 
--	return num * priv_type_size[type];
-+	return num * iw_priv_type_size[type];
-+}
-+
-+/* ---------------------------------------------------------------- */
-+/*
-+ * Re-calculate the size of private arguments
-+ */
-+static inline int adjust_priv_size(__u16		args,
-+				   union iwreq_data *	wrqu)
-+{
-+	int	num = wrqu->data.length;
-+	int	max = args & IW_PRIV_SIZE_MASK;
-+	int	type = (args & IW_PRIV_TYPE_MASK) >> 12;
-+
-+	/* Make sure the driver doesn't goof up */
-+	if (max < num)
-+		num = max;
-+
-+	return num * iw_priv_type_size[type];
- }
- 
- 
-@@ -350,11 +406,14 @@
- 			       dev->name,
- 			       stats->status,
- 			       stats->qual.qual,
--			       stats->qual.updated & 1 ? '.' : ' ',
-+			       stats->qual.updated & IW_QUAL_QUAL_UPDATED
-+			       ? '.' : ' ',
- 			       ((__u8) stats->qual.level),
--			       stats->qual.updated & 2 ? '.' : ' ',
-+			       stats->qual.updated & IW_QUAL_LEVEL_UPDATED
-+			       ? '.' : ' ',
- 			       ((__u8) stats->qual.noise),
--			       stats->qual.updated & 4 ? '.' : ' ',
-+			       stats->qual.updated & IW_QUAL_NOISE_UPDATED
-+			       ? '.' : ' ',
- 			       stats->discard.nwid,
- 			       stats->discard.code,
- 			       stats->discard.fragment,
-@@ -470,13 +529,15 @@
- 	/* Check NULL pointer */
- 	if(iwr->u.data.pointer == NULL)
- 		return -EFAULT;
--#ifdef WE_STRICT_WRITE
-+
- 	/* Check if there is enough buffer up there */
- 	if(iwr->u.data.length < dev->wireless_handlers->num_private_args) {
--		printk(KERN_ERR "%s (WE) : Buffer for request SIOCGIWPRIV too small (%d<%d)\n", dev->name, iwr->u.data.length, dev->wireless_handlers->num_private_args);
-+		/* User space can't know in advance how large the buffer
-+		 * needs to be. Give it a hint, so that we can support
-+		 * any size buffer we want somewhat efficiently... */
-+		iwr->u.data.length = dev->wireless_handlers->num_private_args;
- 		return -E2BIG;
- 	}
--#endif	/* WE_STRICT_WRITE */
- 
- 	/* Set the number of available ioctls. */
- 	iwr->u.data.length = dev->wireless_handlers->num_private_args;
-@@ -505,7 +566,6 @@
- 	const struct iw_ioctl_description *	descr;
- 	struct iw_request_info			info;
- 	int					ret = -EINVAL;
--	int					user_size = 0;
- 
- 	/* Get the description of the IOCTL */
- 	if((cmd - SIOCIWFIRST) >= standard_ioctl_num)
-@@ -536,8 +596,14 @@
- #endif	/* WE_SET_EVENT */
- 	} else {
- 		char *	extra;
-+		int	extra_size;
-+		int	user_length = 0;
- 		int	err;
- 
-+		/* Calculate space needed by arguments. Always allocate
-+		 * for max space. Easier, and won't last long... */
-+		extra_size = descr->max_tokens * descr->token_size;
-+
- 		/* Check what user space is giving us */
- 		if(IW_IS_SET(cmd)) {
- 			/* Check NULL pointer */
-@@ -554,18 +620,33 @@
- 			if(iwr->u.data.pointer == NULL)
- 				return -EFAULT;
- 			/* Save user space buffer size for checking */
--			user_size = iwr->u.data.length;
-+			user_length = iwr->u.data.length;
-+
-+			/* Don't check if user_length > max to allow forward
-+			 * compatibility. The test user_length < min is
-+			 * implied by the test at the end. */
-+
-+			/* Support for very large requests */
-+			if((descr->flags & IW_DESCR_FLAG_NOMAX) &&
-+			   (user_length > descr->max_tokens)) {
-+				/* Allow userspace to GET more than max so
-+				 * we can support any size GET requests.
-+				 * There is still a limit : -ENOMEM. */
-+				extra_size = user_length * descr->token_size;
-+				/* Note : user_length is originally a __u16,
-+				 * and token_size is controlled by us,
-+				 * so extra_size won't get negative and
-+				 * won't overflow... */
-+			}
- 		}
- 
- #ifdef WE_IOCTL_DEBUG
- 		printk(KERN_DEBUG "%s (WE) : Malloc %d bytes\n",
--		       dev->name, descr->max_tokens * descr->token_size);
-+		       dev->name, extra_size);
- #endif	/* WE_IOCTL_DEBUG */
- 
--		/* Always allocate for max space. Easier, and won't last
--		 * long... */
--		extra = kmalloc(descr->max_tokens * descr->token_size,
--				GFP_KERNEL);
-+		/* Create the kernel buffer */
-+		extra = kmalloc(extra_size, GFP_KERNEL);
- 		if (extra == NULL) {
- 			return -ENOMEM;
- 		}
-@@ -591,14 +672,11 @@
- 
- 		/* If we have something to return to the user */
- 		if (!ret && IW_IS_GET(cmd)) {
--#ifdef WE_STRICT_WRITE
- 			/* Check if there is enough buffer up there */
--			if(user_size < iwr->u.data.length) {
--				printk(KERN_ERR "%s (WE) : Buffer for request %04X too small (%d<%d)\n", dev->name, cmd, user_size, iwr->u.data.length);
-+			if(user_length < iwr->u.data.length) {
- 				kfree(extra);
- 				return -E2BIG;
- 			}
--#endif	/* WE_STRICT_WRITE */
- 
- 			err = copy_to_user(iwr->u.data.pointer, extra,
- 					   iwr->u.data.length *
-@@ -661,7 +739,7 @@
- 				     iw_handler		handler)
- {
- 	struct iwreq *			iwr = (struct iwreq *) ifr;
--	struct iw_priv_args *		descr = NULL;
-+	const struct iw_priv_args *	descr = NULL;
- 	struct iw_request_info		info;
- 	int				extra_size = 0;
- 	int				i;
-@@ -701,7 +779,7 @@
- 			   ((extra_size + offset) <= IFNAMSIZ))
- 				extra_size = 0;
- 		} else {
--			/* Size of set arguments */
-+			/* Size of get arguments */
- 			extra_size = get_priv_size(descr->get_args);
- 
- 			/* Does it fits in iwr ? */
-@@ -771,6 +849,14 @@
- 
- 		/* If we have something to return to the user */
- 		if (!ret && IW_IS_GET(cmd)) {
-+
-+			/* Adjust for the actual length if it's variable,
-+			 * avoid leaking kernel bits outside. */
-+			if (!(descr->get_args & IW_PRIV_SIZE_FIXED)) {
-+				extra_size = adjust_priv_size(descr->get_args,
-+							      &(iwr->u));
-+			}
-+
- 			err = copy_to_user(iwr->u.data.pointer, extra,
- 					   extra_size);
- 			if (err)
-@@ -1042,9 +1128,25 @@
-  * One of the main advantage of centralising spy support here is that
-  * it becomes much easier to improve and extend it without having to touch
-  * the drivers. One example is the addition of the Spy-Threshold events.
-- * Note : IW_WIRELESS_SPY is defined in iw_handler.h
-  */
- 
-+/* ---------------------------------------------------------------- */
-+/*
-+ * Return the pointer to the spy data in the driver.
-+ * Because this is called on the Rx path via wireless_spy_update(),
-+ * we want it to be efficient...
-+ */
-+static inline struct iw_spy_data * get_spydata(struct net_device *dev)
-+{
-+	/* This is the new way */
-+	if(dev->wireless_data)
-+		return(dev->wireless_data->spy_data);
-+
-+	/* This is the old way. Doesn't work for multi-headed drivers.
-+	 * It will be removed in the next version of WE. */
-+	return (dev->priv + dev->wireless_handlers->spy_offset);
-+}
-+
- /*------------------------------------------------------------------*/
- /*
-  * Standard Wireless Handler : set Spy List
-@@ -1054,16 +1156,26 @@
- 		       union iwreq_data *	wrqu,
- 		       char *			extra)
- {
--#ifdef IW_WIRELESS_SPY
--	struct iw_spy_data *	spydata = (dev->priv +
--					   dev->wireless_handlers->spy_offset);
-+	struct iw_spy_data *	spydata = get_spydata(dev);
- 	struct sockaddr *	address = (struct sockaddr *) extra;
- 
-+	/* Make sure driver is not buggy or using the old API */
-+	if(!spydata)
-+		return -EOPNOTSUPP;
-+
- 	/* Disable spy collection while we copy the addresses.
--	 * As we don't disable interrupts, we need to do this to avoid races.
--	 * As we are the only writer, this is good enough. */
-+	 * While we copy addresses, any call to wireless_spy_update()
-+	 * will NOP. This is OK, as anyway the addresses are changing. */
- 	spydata->spy_number = 0;
- 
-+	/* We want to operate without locking, because wireless_spy_update()
-+	 * most likely will happen in the interrupt handler, and therefore
-+	 * have its own locking constraints and needs performance.
-+	 * The rtnl_lock() make sure we don't race with the other iw_handlers.
-+	 * This make sure wireless_spy_update() "see" that the spy list
-+	 * is temporarily disabled. */
-+	wmb();
-+
- 	/* Are there are addresses to copy? */
- 	if(wrqu->data.length > 0) {
- 		int i;
-@@ -1089,13 +1201,14 @@
- 			       spydata->spy_address[i][5]);
- #endif	/* WE_SPY_DEBUG */
- 	}
-+
-+	/* Make sure above is updated before re-enabling */
-+	wmb();
-+
- 	/* Enable addresses */
- 	spydata->spy_number = wrqu->data.length;
- 
- 	return 0;
--#else /* IW_WIRELESS_SPY */
--	return -EOPNOTSUPP;
--#endif /* IW_WIRELESS_SPY */
- }
- 
- /*------------------------------------------------------------------*/
-@@ -1107,12 +1220,14 @@
- 		       union iwreq_data *	wrqu,
- 		       char *			extra)
- {
--#ifdef IW_WIRELESS_SPY
--	struct iw_spy_data *	spydata = (dev->priv +
--					   dev->wireless_handlers->spy_offset);
-+	struct iw_spy_data *	spydata = get_spydata(dev);
- 	struct sockaddr *	address = (struct sockaddr *) extra;
- 	int			i;
- 
-+	/* Make sure driver is not buggy or using the old API */
-+	if(!spydata)
-+		return -EOPNOTSUPP;
-+
- 	wrqu->data.length = spydata->spy_number;
- 
- 	/* Copy addresses. */
-@@ -1129,9 +1244,6 @@
- 	for(i = 0; i < spydata->spy_number; i++)
- 		spydata->spy_stat[i].updated = 0;
- 	return 0;
--#else /* IW_WIRELESS_SPY */
--	return -EOPNOTSUPP;
--#endif /* IW_WIRELESS_SPY */
- }
- 
- /*------------------------------------------------------------------*/
-@@ -1143,11 +1255,13 @@
- 			  union iwreq_data *	wrqu,
- 			  char *		extra)
- {
--#ifdef IW_WIRELESS_THRSPY
--	struct iw_spy_data *	spydata = (dev->priv +
--					   dev->wireless_handlers->spy_offset);
-+	struct iw_spy_data *	spydata = get_spydata(dev);
- 	struct iw_thrspy *	threshold = (struct iw_thrspy *) extra;
- 
-+	/* Make sure driver is not buggy or using the old API */
-+	if(!spydata)
-+		return -EOPNOTSUPP;
-+
- 	/* Just do it */
- 	memcpy(&(spydata->spy_thr_low), &(threshold->low),
- 	       2 * sizeof(struct iw_quality));
-@@ -1160,9 +1274,6 @@
- #endif	/* WE_SPY_DEBUG */
- 
- 	return 0;
--#else /* IW_WIRELESS_THRSPY */
--	return -EOPNOTSUPP;
--#endif /* IW_WIRELESS_THRSPY */
- }
- 
- /*------------------------------------------------------------------*/
-@@ -1174,22 +1285,20 @@
- 			  union iwreq_data *	wrqu,
- 			  char *		extra)
- {
--#ifdef IW_WIRELESS_THRSPY
--	struct iw_spy_data *	spydata = (dev->priv +
--					   dev->wireless_handlers->spy_offset);
-+	struct iw_spy_data *	spydata = get_spydata(dev);
- 	struct iw_thrspy *	threshold = (struct iw_thrspy *) extra;
- 
-+	/* Make sure driver is not buggy or using the old API */
-+	if(!spydata)
-+		return -EOPNOTSUPP;
-+
- 	/* Just do it */
- 	memcpy(&(threshold->low), &(spydata->spy_thr_low),
- 	       2 * sizeof(struct iw_quality));
- 
- 	return 0;
--#else /* IW_WIRELESS_THRSPY */
--	return -EOPNOTSUPP;
--#endif /* IW_WIRELESS_THRSPY */
- }
- 
--#ifdef IW_WIRELESS_THRSPY
- /*------------------------------------------------------------------*/
- /*
-  * Prepare and send a Spy Threshold event
-@@ -1227,7 +1336,6 @@
- 	/* Send event to user space */
- 	wireless_send_event(dev, SIOCGIWTHRSPY, &wrqu, (char *) &threshold);
- }
--#endif /* IW_WIRELESS_THRSPY */
- 
- /* ---------------------------------------------------------------- */
- /*
-@@ -1240,12 +1348,14 @@
- 			 unsigned char *	address,
- 			 struct iw_quality *	wstats)
- {
--#ifdef IW_WIRELESS_SPY
--	struct iw_spy_data *	spydata = (dev->priv +
--					   dev->wireless_handlers->spy_offset);
-+	struct iw_spy_data *	spydata = get_spydata(dev);
- 	int			i;
- 	int			match = -1;
- 
-+	/* Make sure driver is not buggy or using the old API */
-+	if(!spydata)
-+		return;
-+
- #ifdef WE_SPY_DEBUG
- 	printk(KERN_DEBUG "wireless_spy_update() :  offset %ld, spydata %p, address %02X:%02X:%02X:%02X:%02X:%02X\n", dev->wireless_handlers->spy_offset, spydata, address[0], address[1], address[2], address[3], address[4], address[5]);
- #endif	/* WE_SPY_DEBUG */
-@@ -1257,7 +1367,7 @@
- 			       sizeof(struct iw_quality));
- 			match = i;
- 		}
--#ifdef IW_WIRELESS_THRSPY
-+
- 	/* Generate an event if we cross the spy threshold.
- 	 * To avoid event storms, we have a simple hysteresis : we generate
- 	 * event only when we go under the low threshold or above the
-@@ -1277,6 +1387,4 @@
- 			}
- 		}
- 	}
--#endif /* IW_WIRELESS_THRSPY */
--#endif /* IW_WIRELESS_SPY */
- }
diff --git a/openwrt/target/linux/generic-2.4/patches/106-mppe_mppc.patch b/openwrt/target/linux/generic-2.4/patches/106-mppe_mppc.patch
deleted file mode 100644
index 382b4623f2..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/106-mppe_mppc.patch
+++ /dev/null
@@ -1,1649 +0,0 @@
-MPPE/MPPC kernel module for Linux
-
-Microsoft Point-to-Point Encryption / Compression support
-
-  http://www.polbox.com/h/hs001/linux-2.4.29-mppe-mppc-1.3.patch.gz
-
-diff -ruN linux-2.4.29.orig/Documentation/Configure.help linux-2.4.29/Documentation/Configure.help
---- linux-2.4.29.orig/Documentation/Configure.help	2005-02-02 22:18:18.000000000 +0100
-+++ linux-2.4.29/Documentation/Configure.help	2005-02-02 22:26:37.000000000 +0100
-@@ -9969,6 +9969,28 @@
-   module; it is called bsd_comp.o and will show up in the directory
-   modules once you have said "make modules". If unsure, say N.
- 
-+Microsoft PPP compression/encryption (MPPC/MPPE)
-+CONFIG_PPP_MPPE_MPPC
-+  Support for the Microsoft Point-To-Point Compression (RFC2118) and 
-+  Microsoft Point-To-Point Encryption (RFC3078). These protocols are
-+  supported by Microsoft Windows and wide range of "hardware" access
-+  servers. MPPE is common protocol in Virtual Private Networks. According
-+  to RFC3078, MPPE supports 40, 56 and 128-bit key lengths. Depending on
-+  PPP daemon configuration on both ends of the link, following scenarios
-+  are possible:
-+	- only compression (MPPC) is used,
-+	- only encryption (MPPE) is used,
-+	- compression and encryption (MPPC+MPPE) are used.
-+
-+  Please note that Hi/Fn (http://www.hifn.com) holds patent on MPPC so
-+  you should check if this patent is valid in your country in order to
-+  avoid legal problems.
-+
-+  For more information please visit http://free.polbox.pl/h/hs001
-+
-+  To compile this driver as a module, choose M here. The module will
-+  be called ppp_mppe_mppc.o.
-+
- PPP over Ethernet
- CONFIG_PPPOE
-   Support for PPP over Ethernet.
-diff -ruN linux-2.4.29.orig/crypto/Config.in linux-2.4.29/crypto/Config.in
---- linux-2.4.29.orig/crypto/Config.in	2005-02-02 22:18:14.000000000 +0100
-+++ linux-2.4.29/crypto/Config.in	2005-02-02 22:26:37.000000000 +0100
-@@ -11,7 +11,9 @@
-      "$CONFIG_INET6_AH" = "y" -o \
-      "$CONFIG_INET6_AH" = "m" -o \
-      "$CONFIG_INET6_ESP" = "y" -o \
--     "$CONFIG_INET6_ESP" = "m" ]; then
-+     "$CONFIG_INET6_ESP" = "m" -o \
-+     "$CONFIG_PPP_MPPE_MPPC" = "y" -o \
-+     "$CONFIG_PPP_MPPE_MPPC" = "m" ]; then
-   define_bool CONFIG_CRYPTO y
- else
-   bool 'Cryptographic API' CONFIG_CRYPTO
-@@ -51,11 +53,24 @@
-        "$CONFIG_INET6_AH" = "y" -o \
-        "$CONFIG_INET6_AH" = "m" -o \
-        "$CONFIG_INET6_ESP" = "y" -o \
--       "$CONFIG_INET6_ESP" = "m" ]; then
--    define_bool CONFIG_CRYPTO_SHA1 y
--  else
--    tristate       '  SHA1 digest algorithm' CONFIG_CRYPTO_SHA1
-+       "$CONFIG_INET6_ESP" = "m" -o \
-+       "$CONFIG_PPP_MPPE_MPPC" = "y" -o \
-+       "$CONFIG_PPP_MPPE_MPPC" = "m" ]; then
-+    if [ "$CONFIG_INET_AH" = "y" -o \
-+	 "$CONFIG_INET_ESP" = "y" -o \
-+	 "$CONFIG_INET6_AH" = "y" -o \
-+	 "$CONFIG_INET6_ESP" = "y" -o \
-+	 "$CONFIG_PPP_MPPE_MPPC" = "y" ]; then
-+      define_tristate CONFIG_CRYPTO_SHA1 y
-+    else
-+      if [ "$CONFIG_CRYPTO_SHA1" != "y" -a \
-+	   "$CONFIG_CRYPTO_SHA1" != "m" ]; then
-+	define_tristate CONFIG_CRYPTO_SHA1 m
-+      fi
-+    fi
-   fi
-+  tristate       '  SHA1 digest algorithm' CONFIG_CRYPTO_SHA1
-+
-   tristate       '  SHA256 digest algorithm' CONFIG_CRYPTO_SHA256
-   tristate       '  SHA384 and SHA512 digest algorithms' CONFIG_CRYPTO_SHA512
-   tristate       '  Whirlpool digest algorithms' CONFIG_CRYPTO_WP512
-@@ -76,7 +91,20 @@
-   tristate       '  TEA and XTEA cipher algorithms' CONFIG_CRYPTO_TEA
-   tristate       '  Khazad cipher algorithm' CONFIG_CRYPTO_KHAZAD
-   tristate       '  Anubis cipher algorithm' CONFIG_CRYPTO_ANUBIS
-+
-+  if [ "$CONFIG_PPP_MPPE_MPPC" = "y" -o \
-+       "$CONFIG_PPP_MPPE_MPPC" = "m" ]; then
-+    if [ "$CONFIG_PPP_MPPE_MPPC" = "y" ]; then
-+      define_tristate CONFIG_CRYPTO_ARC4 y
-+    else
-+      if [ "$CONFIG_CRYPTO_ARC4" != "y" -a \
-+	   "$CONFIG_CRYPTO_ARC4" != "m" ]; then
-+	define_tristate CONFIG_CRYPTO_ARC4 m
-+      fi
-+    fi
-+  fi
-   tristate       '  ARC4 cipher algorithm' CONFIG_CRYPTO_ARC4
-+
-   if [ "$CONFIG_INET_IPCOMP" = "y" -o \
-        "$CONFIG_INET_IPCOMP" = "m" -o \
-        "$CONFIG_INET6_IPCOMP" = "y" -o \
-diff -ruN linux-2.4.29.orig/drivers/net/Config.in linux-2.4.29/drivers/net/Config.in
---- linux-2.4.29.orig/drivers/net/Config.in	2005-02-02 22:17:31.000000000 +0100
-+++ linux-2.4.29/drivers/net/Config.in	2005-02-02 22:26:37.000000000 +0100
-@@ -332,6 +332,7 @@
-    dep_tristate '  PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP
-    dep_tristate '  PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP
-    dep_tristate '  PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP $CONFIG_PPP
-+   dep_tristate '  Microsoft PPP compression/encryption (MPPC/MPPE)' CONFIG_PPP_MPPE_MPPC $CONFIG_PPP
-    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-       dep_tristate '  PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
-    fi
-diff -ruN linux-2.4.29.orig/drivers/net/Makefile linux-2.4.29/drivers/net/Makefile
---- linux-2.4.29.orig/drivers/net/Makefile	2005-02-02 22:17:23.000000000 +0100
-+++ linux-2.4.29/drivers/net/Makefile	2005-02-02 22:26:37.000000000 +0100
-@@ -163,6 +163,7 @@
- obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
- obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
- obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
-+obj-$(CONFIG_PPP_MPPE_MPPC) += ppp_mppe_mppc.o
- obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
- 
- obj-$(CONFIG_SLIP) += slip.o
-diff -ruN linux-2.4.29.orig/drivers/net/ppp_generic.c linux-2.4.29/drivers/net/ppp_generic.c
---- linux-2.4.29.orig/drivers/net/ppp_generic.c	2005-02-02 22:17:24.000000000 +0100
-+++ linux-2.4.29/drivers/net/ppp_generic.c	2005-02-02 22:26:37.000000000 +0100
-@@ -19,7 +19,7 @@
-  * PPP driver, written by Michael Callahan and Al Longyear, and
-  * subsequently hacked by Paul Mackerras.
-  *
-- * ==FILEVERSION 20020217==
-+ * ==FILEVERSION 20040509==
-  */
- 
- #include <linux/config.h>
-@@ -102,6 +102,7 @@
- 	spinlock_t	rlock;		/* lock for receive side 58 */
- 	spinlock_t	wlock;		/* lock for transmit side 5c */
- 	int		mru;		/* max receive unit 60 */
-+	int		mru_alloc;	/* MAX(1500,MRU) for dev_alloc_skb() */
- 	unsigned int	flags;		/* control bits 64 */
- 	unsigned int	xstate;		/* transmit state bits 68 */
- 	unsigned int	rstate;		/* receive state bits 6c */
-@@ -552,7 +553,9 @@
- 	case PPPIOCSMRU:
- 		if (get_user(val, (int *) arg))
- 			break;
--		ppp->mru = val;
-+		ppp->mru_alloc = ppp->mru = val;
-+		if (ppp->mru_alloc < PPP_MRU)
-+		    ppp->mru_alloc = PPP_MRU;	/* increase for broken peers */
- 		err = 0;
- 		break;
- 
-@@ -1025,14 +1028,37 @@
- 	case PPP_CCP:
- 		/* peek at outbound CCP frames */
- 		ppp_ccp_peek(ppp, skb, 0);
-+		/*
-+		 * When LZS or MPPE/MPPC has been negotiated we don't send
-+		 * CCP_RESETACK after receiving CCP_RESETREQ; in fact pppd
-+		 * sends such a packet but we silently discard it here
-+		 */
-+		if (CCP_CODE(skb->data+2) == CCP_RESETACK
-+		    && (ppp->xcomp->compress_proto == CI_MPPE
-+			|| ppp->xcomp->compress_proto == CI_LZS)) {
-+		    --ppp->stats.tx_packets;
-+		    ppp->stats.tx_bytes -= skb->len - 2;
-+		    kfree_skb(skb);
-+		    return;
-+		}
- 		break;
- 	}
- 
- 	/* try to do packet compression */
- 	if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state != 0
- 	    && proto != PPP_LCP && proto != PPP_CCP) {
--		new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len,
--				    GFP_ATOMIC);
-+		int comp_ovhd = 0;
-+		/* 
-+		 * because of possible data expansion when MPPC or LZS
-+		 * is used, allocate compressor's buffer 12.5% bigger
-+		 * than MTU
-+		 */
-+		if (ppp->xcomp->compress_proto == CI_MPPE)
-+		    comp_ovhd = ((ppp->dev->mtu * 9) / 8) + 1 + MPPE_OVHD;
-+		else if (ppp->xcomp->compress_proto == CI_LZS)
-+		    comp_ovhd = ((ppp->dev->mtu * 9) / 8) + 1 + LZS_OVHD;
-+		new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len
-+				    + comp_ovhd, GFP_ATOMIC);
- 		if (new_skb == 0) {
- 			printk(KERN_ERR "PPP: no memory (comp pkt)\n");
- 			goto drop;
-@@ -1050,9 +1076,21 @@
- 			skb = new_skb;
- 			skb_put(skb, len);
- 			skb_pull(skb, 2);	/* pull off A/C bytes */
--		} else {
-+		} else if (len == 0) {
- 			/* didn't compress, or CCP not up yet */
- 			kfree_skb(new_skb);
-+		} else {
-+			/*
-+			 * (len < 0)
-+			 * MPPE requires that we do not send unencrypted
-+			 * frames.  The compressor will return -1 if we
-+			 * should drop the frame.  We cannot simply test
-+			 * the compress_proto because MPPE and MPPC share
-+			 * the same number.
-+			 */
-+			printk(KERN_ERR "ppp: compressor dropped pkt\n");
-+			kfree_skb(new_skb);
-+			goto drop;
- 		}
- 	}
- 
-@@ -1540,14 +1578,15 @@
- 	int len;
- 
- 	if (proto == PPP_COMP) {
--		ns = dev_alloc_skb(ppp->mru + PPP_HDRLEN);
-+		ns = dev_alloc_skb(ppp->mru_alloc + PPP_HDRLEN);
- 		if (ns == 0) {
- 			printk(KERN_ERR "ppp_decompress_frame: no memory\n");
- 			goto err;
- 		}
- 		/* the decompressor still expects the A/C bytes in the hdr */
- 		len = ppp->rcomp->decompress(ppp->rc_state, skb->data - 2,
--				skb->len + 2, ns->data, ppp->mru + PPP_HDRLEN);
-+				skb->len + 2, ns->data,
-+				ppp->mru_alloc + PPP_HDRLEN);
- 		if (len < 0) {
- 			/* Pass the compressed frame to pppd as an
- 			   error indication. */
-@@ -1573,7 +1612,14 @@
- 	return skb;
- 
-  err:
--	ppp->rstate |= SC_DC_ERROR;
-+	if (ppp->rcomp->compress_proto != CI_MPPE
-+	    && ppp->rcomp->compress_proto != CI_LZS) {
-+	    /*
-+	     * If decompression protocol isn't MPPE/MPPC or LZS, we set
-+	     * SC_DC_ERROR flag and wait for CCP_RESETACK
-+	     */
-+	    ppp->rstate |= SC_DC_ERROR;
-+	}
- 	ppp_receive_error(ppp);
- 	return skb;
- }
-@@ -2253,6 +2299,7 @@
- 	/* Initialize the new ppp unit */
- 	ppp->file.index = unit;
- 	ppp->mru = PPP_MRU;
-+	ppp->mru_alloc = PPP_MRU;
- 	init_ppp_file(&ppp->file, INTERFACE);
- 	ppp->file.hdrlen = PPP_HDRLEN - 2;	/* don't count proto bytes */
- 	for (i = 0; i < NUM_NP; ++i)
-diff -ruN linux-2.4.29.orig/drivers/net/ppp_mppe_mppc.c linux-2.4.29/drivers/net/ppp_mppe_mppc.c
---- linux-2.4.29.orig/drivers/net/ppp_mppe_mppc.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/drivers/net/ppp_mppe_mppc.c	2005-02-02 23:07:40.000000000 +0100
-@@ -0,0 +1,1312 @@
-+/*
-+ * ppp_mppe_mppc.c - MPPC/MPPE "compressor/decompressor" module.
-+ *
-+ * Copyright (c) 1994 Árpád Magosányi <mag@bunuel.tii.matav.hu>
-+ * Copyright (c) 1999 Tim Hockin, Cobalt Networks Inc. <thockin@cobaltnet.com>
-+ * Copyright (c) 2002-2005 Jan Dubiec <jdx@slackware.pl>
-+ * 
-+ * Permission to use, copy, modify, and distribute this software and its
-+ * documentation is hereby granted, provided that the above copyright
-+ * notice appears in all copies. This software is provided without any
-+ * warranty, express or implied.
-+ *
-+ * The code is based on MPPE kernel module written by Árpád Magosányi and
-+ * Tim Hockin which can be found on http://planetmirror.com/pub/mppe/.
-+ * I have added MPPC and 56 bit session keys support in MPPE.
-+ *
-+ * WARNING! Although this is open source code, its usage in some countries
-+ * (in particular in the USA) may violate Stac Inc. patent for MPPC.
-+ *
-+ *  ==FILEVERSION 20050202==
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <asm/scatterlist.h>
-+#include <linux/vmalloc.h>
-+#include <linux/crypto.h>
-+
-+#include <linux/ppp_defs.h>
-+#include <linux/ppp-comp.h>
-+
-+/*
-+ * In 2.4.x kernels macro offset_in_page() is not defined in linux/mm.h so
-+ * we define it here; PAGE_MASK is defined in asm/page.h which is included
-+ * by linux/mm.h.
-+ */
-+#define offset_in_page(p)	((unsigned long)(p) & ~PAGE_MASK)
-+
-+/*
-+ * State for a mppc/mppe "(de)compressor".
-+ */
-+struct ppp_mppe_state {
-+    struct crypto_tfm *arc4_tfm;
-+    struct crypto_tfm *sha1_tfm;
-+    u8		*sha1_digest;
-+    u8		master_key[MPPE_MAX_KEY_LEN];
-+    u8		session_key[MPPE_MAX_KEY_LEN];
-+    u8		mppc;		/* do we use compression (MPPC)? */
-+    u8		mppe;		/* do we use encryption (MPPE)? */
-+    u8		keylen;		/* key length in bytes */
-+    u8		bitkeylen;	/* key length in bits */
-+    u16		ccount;		/* coherency counter */
-+    u16		bits;		/* MPPC/MPPE control bits */
-+    u8		stateless;	/* do we use stateless mode? */
-+    u8		nextflushed;	/* set A bit in the next outgoing packet;
-+				   used only by compressor*/
-+    u8		flushexpected;	/* drop packets until A bit is received;
-+				   used only by decompressor*/
-+    u8		*hist;		/* MPPC history */
-+    u16		*hash;		/* Hash table; used only by compressor */
-+    u16		histptr;	/* history "cursor" */
-+    int		unit;
-+    int		debug;
-+    int		mru;
-+    struct compstat stats;
-+};
-+
-+#define MPPE_HIST_LEN		8192	/* MPPC history size */
-+#define MPPE_MAX_CCOUNT		0x0FFF	/* max. coherency counter value */
-+
-+#define MPPE_BIT_FLUSHED	0x80	/* bit A */
-+#define MPPE_BIT_RESET		0x40	/* bit B */
-+#define MPPE_BIT_COMP		0x20	/* bit C */
-+#define MPPE_BIT_ENCRYPTED	0x10	/* bit D */
-+
-+#define MPPE_SALT0		0xD1	/* values used in MPPE key derivation */
-+#define MPPE_SALT1		0x26	/* according to RFC3079 */
-+#define MPPE_SALT2		0x9E
-+
-+#define MPPE_CCOUNT(x)		((((x)[4] & 0x0f) << 8) + (x)[5])
-+#define MPPE_BITS(x)		((x)[4] & 0xf0)
-+#define MPPE_CTRLHI(x)		((((x)->ccount & 0xf00)>>8)|((x)->bits))
-+#define MPPE_CTRLLO(x)		((x)->ccount & 0xff)
-+
-+/*
-+ * Kernel Crypto API needs its arguments to be in kmalloc'd memory, not in the
-+ * module static data area. That means sha_pad needs to be kmalloc'd. It is done
-+ * in mppe_module_init(). This has been pointed out on 30th July 2004 by Oleg
-+ * Makarenko on pptpclient-devel mailing list.
-+ */
-+#define SHA1_PAD_SIZE		40
-+struct sha_pad {
-+    unsigned char sha_pad1[SHA1_PAD_SIZE];
-+    unsigned char sha_pad2[SHA1_PAD_SIZE];
-+};
-+static struct sha_pad *sha_pad;
-+
-+static inline void
-+setup_sg(struct scatterlist *sg, const void  *address, unsigned int length)
-+{
-+    sg[0].page = virt_to_page(address);
-+    sg[0].offset = offset_in_page(address);
-+    sg[0].length = length;
-+}
-+
-+static inline void
-+arc4_setkey(struct ppp_mppe_state *state, const unsigned char *key,
-+	    const unsigned int keylen)
-+{
-+    crypto_cipher_setkey(state->arc4_tfm, key, keylen);
-+}
-+
-+static inline void
-+arc4_encrypt(struct ppp_mppe_state *state, const unsigned char *in,
-+	     const unsigned int len, unsigned char *out)
-+{
-+    struct scatterlist sgin[4], sgout[4];
-+
-+    setup_sg(sgin, in, len);
-+    setup_sg(sgout, out, len);
-+    crypto_cipher_encrypt(state->arc4_tfm, sgout, sgin, len);
-+}
-+
-+#define arc4_decrypt arc4_encrypt
-+
-+/*
-+ * Key Derivation, from RFC 3078, RFC 3079.
-+ * Equivalent to Get_Key() for MS-CHAP as described in RFC 3079.
-+ */
-+static void
-+get_new_key_from_sha(struct ppp_mppe_state *state, unsigned char *interim_key)
-+{
-+    struct scatterlist sg[4];
-+
-+    setup_sg(&sg[0], state->master_key, state->keylen);
-+    setup_sg(&sg[1], sha_pad->sha_pad1, sizeof(sha_pad->sha_pad1));
-+    setup_sg(&sg[2], state->session_key, state->keylen);
-+    setup_sg(&sg[3], sha_pad->sha_pad2, sizeof(sha_pad->sha_pad2));
-+
-+    crypto_digest_digest (state->sha1_tfm, sg, 4, state->sha1_digest);
-+
-+    memcpy(interim_key, state->sha1_digest, state->keylen);
-+}
-+
-+static void
-+mppe_change_key(struct ppp_mppe_state *state, int initialize)
-+{
-+    unsigned char interim_key[MPPE_MAX_KEY_LEN];
-+
-+    get_new_key_from_sha(state, interim_key);
-+    if (initialize) {
-+	memcpy(state->session_key, interim_key, state->keylen);
-+    } else {
-+	arc4_setkey(state, interim_key, state->keylen);
-+	arc4_encrypt(state, interim_key, state->keylen, state->session_key);
-+    }
-+    if (state->keylen == 8) {
-+	if (state->bitkeylen == 40) {
-+	    state->session_key[0] = MPPE_SALT0;
-+	    state->session_key[1] = MPPE_SALT1;
-+	    state->session_key[2] = MPPE_SALT2;
-+	} else {
-+	    state->session_key[0] = MPPE_SALT0;
-+	}
-+    }
-+    arc4_setkey(state, state->session_key, state->keylen);
-+}
-+
-+/* increase 12-bit coherency counter */
-+static inline void
-+mppe_increase_ccount(struct ppp_mppe_state *state)
-+{
-+    state->ccount = (state->ccount + 1) & MPPE_MAX_CCOUNT;
-+    if (state->mppe) {
-+	if (state->stateless) {
-+	    mppe_change_key(state, 0);
-+	    state->nextflushed = 1;
-+	} else {
-+	    if ((state->ccount & 0xff) == 0xff) {
-+		mppe_change_key(state, 0);
-+	    }
-+	}
-+    }
-+}
-+
-+/* allocate space for a MPPE/MPPC (de)compressor.  */
-+/*   comp != 0 -> init compressor */
-+/*   comp = 0 -> init decompressor */
-+static void *
-+mppe_alloc(unsigned char *options, int opt_len, int comp)
-+{
-+    struct ppp_mppe_state *state;
-+    unsigned int digestsize;
-+    u8* fname;
-+
-+    fname = comp ? "mppe_comp_alloc" : "mppe_decomp_alloc";
-+
-+    /*  
-+     * Hack warning - additionally to the standard MPPC/MPPE configuration
-+     * options, pppd passes to the (de)copressor 8 or 16 byte session key.
-+     * Therefore options[1] contains MPPC/MPPE configuration option length
-+     * (CILEN_MPPE = 6), but the real options length, depending on the key
-+     * length, is 6+8 or 6+16.
-+     */
-+    if (opt_len < CILEN_MPPE) {
-+	printk(KERN_WARNING "%s: wrong options length: %u\n", fname, opt_len);
-+	return NULL;
-+    }
-+
-+    if (options[0] != CI_MPPE || options[1] != CILEN_MPPE ||
-+	(options[2] & ~MPPE_STATELESS) != 0 ||
-+	options[3] != 0 || options[4] != 0 ||
-+	(options[5] & ~(MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) != 0 ||
-+	(options[5] & (MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) == 0) {
-+	printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, "
-+	       "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname, options[0],
-+	       options[1], options[2], options[3], options[4], options[5]);
-+	return NULL;
-+    }
-+
-+    state = (struct ppp_mppe_state *)kmalloc(sizeof(*state), GFP_KERNEL);
-+    if (state == NULL) {
-+	printk(KERN_ERR "%s: cannot allocate space for %scompressor\n", fname,
-+	       comp ? "" : "de");
-+	return NULL;
-+    }
-+    memset(state, 0, sizeof(struct ppp_mppe_state));
-+
-+    state->mppc = options[5] & MPPE_MPPC;	/* Do we use MPPC? */
-+    state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT |
-+	MPPE_40BIT);				/* Do we use MPPE? */
-+
-+    if (state->mppc) {
-+	/* allocate MPPC history */
-+	state->hist = (u8*)vmalloc(2*MPPE_HIST_LEN*sizeof(u8));
-+	if (state->hist == NULL) {
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: cannot allocate space for MPPC history\n",
-+		   fname);
-+	    return NULL;
-+	}
-+
-+	/* allocate hashtable for MPPC compressor */
-+	if (comp) {
-+	    state->hash = (u16*)vmalloc(MPPE_HIST_LEN*sizeof(u16));
-+	    if (state->hash == NULL) {
-+		vfree(state->hist);
-+		kfree(state);
-+		printk(KERN_ERR "%s: cannot allocate space for MPPC history\n",
-+		       fname);
-+		return NULL;
-+	    }
-+	}
-+    }
-+
-+    if (state->mppe) { /* specific for MPPE */
-+	/* Load ARC4 algorithm */
-+	state->arc4_tfm = crypto_alloc_tfm("arc4", 0);
-+	if (state->arc4_tfm == NULL) {
-+	    if (state->mppc) {
-+		vfree(state->hash);
-+		if (comp)
-+		    vfree(state->hist);
-+	    }
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: cannot load ARC4 module\n", fname);
-+	    return NULL;
-+	}
-+
-+	/* Load SHA1 algorithm */
-+	state->sha1_tfm = crypto_alloc_tfm("sha1", 0);
-+	if (state->sha1_tfm == NULL) {
-+	    crypto_free_tfm(state->arc4_tfm);
-+	    if (state->mppc) {
-+		vfree(state->hash);
-+		if (comp)
-+		    vfree(state->hist);
-+	    }
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: cannot load SHA1 module\n", fname);
-+	    return NULL;
-+	}
-+
-+	digestsize = crypto_tfm_alg_digestsize(state->sha1_tfm);
-+	if (digestsize < MPPE_MAX_KEY_LEN) {
-+	    crypto_free_tfm(state->sha1_tfm);
-+	    crypto_free_tfm(state->arc4_tfm);
-+	    if (state->mppc) {
-+		vfree(state->hash);
-+		if (comp)
-+		    vfree(state->hist);
-+	    }
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: CryptoAPI SHA1 digest size too small\n", fname);
-+	}
-+
-+	state->sha1_digest = kmalloc(digestsize, GFP_KERNEL);
-+	if (!state->sha1_digest) {
-+	    crypto_free_tfm(state->sha1_tfm);
-+	    crypto_free_tfm(state->arc4_tfm);
-+	    if (state->mppc) {
-+		vfree(state->hash);
-+		if (comp)
-+		    vfree(state->hist);
-+	    }
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: cannot allocate space for SHA1 digest\n", fname);
-+	}
-+
-+	memcpy(state->master_key, options+CILEN_MPPE, MPPE_MAX_KEY_LEN);
-+	memcpy(state->session_key, state->master_key, MPPE_MAX_KEY_LEN);
-+	/* initial key generation is done in mppe_init() */
-+    }
-+
-+    MOD_INC_USE_COUNT;
-+
-+    return (void *) state;
-+}
-+
-+static void *
-+mppe_comp_alloc(unsigned char *options, int opt_len)
-+{
-+    return mppe_alloc(options, opt_len, 1);
-+}
-+
-+static void *
-+mppe_decomp_alloc(unsigned char *options, int opt_len)
-+{
-+    return mppe_alloc(options, opt_len, 0);
-+}
-+
-+/* cleanup the (de)compressor */
-+static void
-+mppe_comp_free(void *arg)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
-+
-+    if (state != NULL) {
-+	if (state->mppe) {
-+	    if (state->sha1_tfm != NULL)
-+		crypto_free_tfm(state->sha1_tfm);
-+	    if (state->arc4_tfm != NULL)
-+		crypto_free_tfm(state->arc4_tfm);
-+	}
-+	if (state->hist != NULL)
-+	    vfree(state->hist);
-+	if (state->hash != NULL)
-+	    vfree(state->hash);
-+	kfree(state);
-+    }
-+
-+    MOD_DEC_USE_COUNT;
-+}
-+
-+/* init MPPC/MPPE (de)compresor */
-+/*   comp != 0 -> init compressor */
-+/*   comp = 0 -> init decompressor */
-+static int
-+mppe_init(void *arg, unsigned char *options, int opt_len, int unit,
-+	  int hdrlen, int mru, int debug, int comp)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
-+    u8* fname;
-+
-+    fname = comp ? "mppe_comp_init" : "mppe_decomp_init";
-+
-+    if (opt_len < CILEN_MPPE) {
-+	if (debug)
-+	    printk(KERN_WARNING "%s: wrong options length: %u\n",
-+		   fname, opt_len);
-+	return 0;
-+    }
-+
-+    if (options[0] != CI_MPPE || options[1] != CILEN_MPPE ||
-+	(options[2] & ~MPPE_STATELESS) != 0 ||
-+	options[3] != 0 || options[4] != 0 ||
-+	(options[5] & ~(MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) != 0 ||
-+	(options[5] & (MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) == 0) {
-+	if (debug)
-+	    printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, "
-+		   "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname,
-+		   options[0], options[1], options[2], options[3], options[4],
-+		   options[5]);
-+	return 0;
-+    }
-+
-+    if ((options[5] & ~MPPE_MPPC) != MPPE_128BIT &&
-+	(options[5] & ~MPPE_MPPC) != MPPE_56BIT &&
-+	(options[5] & ~MPPE_MPPC) != MPPE_40BIT &&
-+	(options[5] & MPPE_MPPC) != MPPE_MPPC) {
-+	if (debug)
-+	    printk(KERN_WARNING "%s: don't know what to do: o[5]=%02x\n",
-+		   fname, options[5]);
-+	return 0;
-+    }
-+
-+    state->mppc = options[5] & MPPE_MPPC;	/* Do we use MPPC? */
-+    state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT |
-+	MPPE_40BIT);				/* Do we use MPPE? */
-+    state->stateless = options[2] & MPPE_STATELESS; /* Do we use stateless mode? */
-+
-+    switch (state->mppe) {
-+    case MPPE_40BIT:     /* 40 bit key */
-+	state->keylen = 8;
-+	state->bitkeylen = 40;
-+	break;
-+    case MPPE_56BIT:     /* 56 bit key */
-+	state->keylen = 8;
-+	state->bitkeylen = 56;
-+	break;
-+    case MPPE_128BIT:    /* 128 bit key */
-+	state->keylen = 16;
-+	state->bitkeylen = 128;
-+	break;
-+    default:
-+	state->keylen = 0;
-+	state->bitkeylen = 0;
-+    }
-+
-+    state->ccount = MPPE_MAX_CCOUNT;
-+    state->bits = 0;
-+    state->unit  = unit;
-+    state->debug = debug;
-+    state->histptr = MPPE_HIST_LEN;
-+    if (state->mppc) {	/* reset history if MPPC was negotiated */
-+	memset(state->hist, 0, 2*MPPE_HIST_LEN*sizeof(u8));
-+    }
-+
-+    if (state->mppe) { /* generate initial session keys */
-+	mppe_change_key(state, 1);
-+    }
-+
-+    if (comp) { /* specific for compressor */
-+	state->nextflushed = 1;
-+    } else { /* specific for decompressor */
-+	state->mru = mru;
-+	state->flushexpected = 1;
-+    }
-+
-+    return 1;
-+}
-+
-+static int
-+mppe_comp_init(void *arg, unsigned char *options, int opt_len, int unit,
-+	       int hdrlen, int debug)
-+{
-+    return mppe_init(arg, options, opt_len, unit, hdrlen, 0, debug, 1);
-+}
-+
-+
-+static int
-+mppe_decomp_init(void *arg, unsigned char *options, int opt_len, int unit,
-+		 int hdrlen, int mru, int debug)
-+{
-+    return mppe_init(arg, options, opt_len, unit, hdrlen, mru, debug, 0);
-+}
-+
-+static void
-+mppe_comp_reset(void *arg)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
-+
-+    if (state->debug)
-+	printk(KERN_DEBUG "%s%d: resetting MPPC/MPPE compressor\n",
-+	       __FUNCTION__, state->unit);
-+
-+    state->nextflushed = 1;
-+    if (state->mppe)
-+	arc4_setkey(state, state->session_key, state->keylen);
-+}
-+
-+static void
-+mppe_decomp_reset(void *arg)
-+{
-+    /* When MPPC/MPPE is in use, we shouldn't receive any CCP Reset-Ack.
-+       But when we receive such a packet, we just ignore it. */
-+    return;
-+}
-+
-+static void
-+mppe_stats(void *arg, struct compstat *stats)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
-+
-+    *stats = state->stats;
-+}
-+
-+/***************************/
-+/**** Compression stuff ****/
-+/***************************/
-+/* inserts 1 to 8 bits into the output buffer */
-+static inline void putbits8(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
-+{
-+    buf += *i;
-+    if (*l >= n) {
-+	*l = (*l) - n;
-+	val <<= *l;
-+	*buf = *buf | (val & 0xff);
-+	if (*l == 0) {
-+	    *l = 8;
-+	    (*i)++;
-+	    *(++buf) = 0;
-+	}
-+    } else {
-+	(*i)++;
-+	*l = 8 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 8) & 0xff);
-+	*(++buf) = val & 0xff;
-+    }
-+}
-+
-+/* inserts 9 to 16 bits into the output buffer */
-+static inline void putbits16(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
-+{
-+    buf += *i;
-+    if (*l >= n - 8) {
-+	(*i)++;
-+	*l = 8 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 8) & 0xff);
-+	*(++buf) = val & 0xff;
-+	if (*l == 0) {
-+	    *l = 8;
-+	    (*i)++;
-+	    *(++buf) = 0;
-+	}
-+    } else {
-+	(*i)++; (*i)++;
-+	*l = 16 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 16) & 0xff);
-+	*(++buf) = (val >> 8) & 0xff;
-+	*(++buf) = val & 0xff;
-+    }
-+}
-+
-+/* inserts 17 to 24 bits into the output buffer */
-+static inline void putbits24(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
-+{
-+    buf += *i;
-+    if (*l >= n - 16) {
-+	(*i)++; (*i)++;
-+	*l = 16 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 16) & 0xff);
-+	*(++buf) = (val >> 8) & 0xff;
-+	*(++buf) = val & 0xff;
-+	if (*l == 0) {
-+	    *l = 8;
-+	    (*i)++;
-+	    *(++buf) = 0;
-+	}
-+    } else {
-+	(*i)++; (*i)++; (*i)++;
-+	*l = 24 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 24) & 0xff);
-+	*(++buf) = (val >> 16) & 0xff;
-+	*(++buf) = (val >> 8) & 0xff;
-+	*(++buf) = val & 0xff;
-+    }
-+}
-+
-+static int
-+mppc_compress(struct ppp_mppe_state *state, unsigned char *ibuf,
-+	      unsigned char *obuf, int isize, int osize)
-+{
-+    u32 olen, off, len, idx, i, l;
-+    u8 *hist, *sbuf, *p, *q, *r, *s;
-+
-+    /*  
-+	At this point, to avoid possible buffer overflow caused by packet
-+	expansion during/after compression,  we should make sure that
-+	osize >= (((isize*9)/8)+1)+2, but we don't do that because in
-+	ppp_generic.c we simply allocate bigger obuf.
-+
-+	Maximum MPPC packet expansion is 12.5%. This is the worst case when
-+	all octets in the input buffer are >= 0x80 and we cannot find any
-+	repeated tokens. Additionally we have to reserve 2 bytes for MPPE/MPPC
-+	status bits and coherency counter.
-+    */
-+
-+    hist = state->hist + MPPE_HIST_LEN;
-+    /* check if there is enough room at the end of the history */
-+    if (state->histptr + isize >= 2*MPPE_HIST_LEN) {
-+	state->bits |= MPPE_BIT_RESET;
-+	state->histptr = MPPE_HIST_LEN;
-+	memcpy(state->hist, hist, MPPE_HIST_LEN);
-+    }
-+    /* add packet to the history; isize must be <= MPPE_HIST_LEN */
-+    sbuf = state->hist + state->histptr;
-+    memcpy(sbuf, ibuf, isize);
-+    state->histptr += isize;
-+
-+    /* compress data */
-+    r = sbuf + isize;
-+    *obuf = olen = i = 0;
-+    l = 8;
-+    while (i < isize - 2) {
-+	s = q = sbuf + i;
-+	idx = ((40543*((((s[0]<<4)^s[1])<<4)^s[2]))>>4) & 0x1fff;
-+	p = hist + state->hash[idx];
-+	state->hash[idx] = (u16) (s - hist);
-+	off = s - p;
-+	if (off > MPPE_HIST_LEN - 1 || off < 1 || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++) {
-+	    /* no match found; encode literal byte */
-+	    if (ibuf[i] < 0x80) {		/* literal byte < 0x80 */
-+		putbits8(obuf, (u32) ibuf[i], 8, &olen, &l);
-+	    } else {				/* literal byte >= 0x80 */
-+		putbits16(obuf, (u32) (0x100|(ibuf[i]&0x7f)), 9, &olen, &l);
-+	    }
-+	    ++i;
-+	    continue;
-+	}
-+	if (r - q >= 64) {
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++;
-+	    if (s - q == 64) {
-+		p--; s--;
-+		while((*p++ == *s++) && (s < r) && (p < q));
-+	    }
-+	} else {
-+	    while((*p++ == *s++) && (s < r) && (p < q));
-+	}
-+	len = s - q - 1;
-+	i += len;
-+
-+	/* at least 3 character match found; code data */
-+	/* encode offset */
-+	if (off < 64) {			/* 10-bit offset; 0 <= offset < 64 */
-+	    putbits16(obuf, 0x3c0|off, 10, &olen, &l);
-+	} else if (off < 320) {		/* 12-bit offset; 64 <= offset < 320 */
-+	    putbits16(obuf, 0xe00|(off-64), 12, &olen, &l);
-+	} else if (off < 8192) {	/* 16-bit offset; 320 <= offset < 8192 */
-+	    putbits16(obuf, 0xc000|(off-320), 16, &olen, &l);
-+	} else {
-+	    /* This shouldn't happen; we return 0 what means "packet expands",
-+	    and we send packet uncompressed. */
-+	    if (state->debug)
-+		printk(KERN_DEBUG "%s%d: wrong offset value: %d\n",
-+		       __FUNCTION__, state->unit, off);
-+	    return 0;
-+	}
-+	/* encode length of match */
-+	if (len < 4) {			/* length = 3 */
-+	    putbits8(obuf, 0, 1, &olen, &l);
-+	} else if (len < 8) {		/* 4 <= length < 8 */
-+	    putbits8(obuf, 0x08|(len&0x03), 4, &olen, &l);
-+	} else if (len < 16) {		/* 8 <= length < 16 */
-+	    putbits8(obuf, 0x30|(len&0x07), 6, &olen, &l);
-+	} else if (len < 32) {		/* 16 <= length < 32 */
-+	    putbits8(obuf, 0xe0|(len&0x0f), 8, &olen, &l);
-+	} else if (len < 64) {		/* 32 <= length < 64 */
-+	    putbits16(obuf, 0x3c0|(len&0x1f), 10, &olen, &l);
-+	} else if (len < 128) {		/* 64 <= length < 128 */
-+	    putbits16(obuf, 0xf80|(len&0x3f), 12, &olen, &l);
-+	} else if (len < 256) {		/* 128 <= length < 256 */
-+	    putbits16(obuf, 0x3f00|(len&0x7f), 14, &olen, &l);
-+	} else if (len < 512) {		/* 256 <= length < 512 */
-+	    putbits16(obuf, 0xfe00|(len&0xff), 16, &olen, &l);
-+	} else if (len < 1024) {	/* 512 <= length < 1024 */
-+	    putbits24(obuf, 0x3fc00|(len&0x1ff), 18, &olen, &l);
-+	} else if (len < 2048) {	/* 1024 <= length < 2048 */
-+	    putbits24(obuf, 0xff800|(len&0x3ff), 20, &olen, &l);
-+	} else if (len < 4096) {	/* 2048 <= length < 4096 */
-+	    putbits24(obuf, 0x3ff000|(len&0x7ff), 22, &olen, &l);
-+	} else if (len < 8192) {	/* 4096 <= length < 8192 */
-+	    putbits24(obuf, 0xffe000|(len&0xfff), 24, &olen, &l);
-+	} else {
-+	    /* This shouldn't happen; we return 0 what means "packet expands",
-+	    and send packet uncompressed. */
-+	    if (state->debug)
-+		printk(KERN_DEBUG "%s%d: wrong length of match value: %d\n",
-+		       __FUNCTION__, state->unit, len);
-+	    return 0;
-+	}
-+    }
-+
-+    /* Add remaining octets to the output */
-+    while(isize - i > 0) {
-+	if (ibuf[i] < 0x80) {	/* literal byte < 0x80 */
-+	    putbits8(obuf, (u32) ibuf[i++], 8, &olen, &l);
-+	} else {		/* literal byte >= 0x80 */
-+	    putbits16(obuf, (u32) (0x100|(ibuf[i++]&0x7f)), 9, &olen, &l);
-+	}
-+    }
-+    /* Reset unused bits of the last output octet */
-+    if ((l != 0) && (l != 8)) {
-+	putbits8(obuf, 0, l, &olen, &l);
-+    }
-+
-+    return (int) olen;
-+}
-+
-+int
-+mppe_compress(void *arg, unsigned char *ibuf, unsigned char *obuf,
-+	      int isize, int osize)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
-+    int proto, olen, complen, off;
-+    unsigned char *wptr;
-+
-+    /* Check that the protocol is in the range we handle. */
-+    proto = PPP_PROTOCOL(ibuf);
-+    if (proto < 0x0021 || proto > 0x00fa)
-+	return 0;
-+
-+    wptr = obuf;
-+    /* Copy over the PPP header */
-+    wptr[0] = PPP_ADDRESS(ibuf);
-+    wptr[1] = PPP_CONTROL(ibuf);
-+    wptr[2] = PPP_COMP >> 8;
-+    wptr[3] = PPP_COMP;
-+    wptr += PPP_HDRLEN + (MPPE_OVHD / 2); /* Leave two octets for MPPE/MPPC bits */
-+
-+    /* 
-+     * In ver. 0.99 protocol field was compressed. Deflate and BSD compress
-+     * do PFC before actual compression, RCF2118 and RFC3078 are not precise
-+     * on this topic so I decided to do PFC. Unfortunately this change caused
-+     * incompatibility with older/other MPPE/MPPC modules. I have received
-+     * a lot of complaints from unexperienced users so I have decided to revert
-+     * to previous state, i.e. the protocol field is sent uncompressed now.
-+     * Although this may be changed in the future.
-+     *
-+     * Receiving side (mppe_decompress()) still accepts packets with compressed
-+     * and uncompressed protocol field so you shouldn't get "Unsupported protocol
-+     * 0x2145 received" messages anymore.
-+     */
-+    //off = (proto > 0xff) ? 2 : 3; /* PFC - skip first protocol byte if 0 */
-+    off = 2;
-+
-+    ibuf += off;
-+
-+    mppe_increase_ccount(state);
-+
-+    if (state->nextflushed) {
-+	state->bits |= MPPE_BIT_FLUSHED;
-+	state->nextflushed = 0;
-+	if (state->mppe && !state->stateless) {
-+	    /*
-+	     * If this is the flag packet, the key has been already changed in
-+	     * mppe_increase_ccount() so we dont't do it once again.
-+	     */
-+	    if ((state->ccount & 0xff) != 0xff) {
-+		arc4_setkey(state, state->session_key, state->keylen);
-+	    }
-+	}
-+	if (state->mppc) { /* reset history */
-+	    state->bits |= MPPE_BIT_RESET;
-+	    state->histptr = MPPE_HIST_LEN;
-+	    memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8));
-+	}
-+    }
-+
-+    if (state->mppc && !state->mppe) { /* Do only compression */
-+	complen = mppc_compress(state, ibuf, wptr, isize - off,
-+				osize - PPP_HDRLEN - (MPPE_OVHD / 2));
-+	/*
-+	 * TODO: Implement an heuristics to handle packet expansion in a smart
-+	 * way. Now, when a packet expands, we send it as uncompressed and
-+	 * when next packet is sent we have to reset compressor's history.
-+	 * Maybe it would be better to send such packet as compressed in order
-+	 * to keep history's continuity.
-+	 */
-+	if ((complen > isize) || (complen > osize - PPP_HDRLEN) ||
-+	    (complen == 0)) {
-+	    /* packet expands */
-+	    state->nextflushed = 1;
-+	    memcpy(wptr, ibuf, isize - off);
-+	    olen = isize - (off - 2) + MPPE_OVHD;
-+	    (state->stats).inc_bytes += olen;
-+	    (state->stats).inc_packets++;
-+	} else {
-+	    state->bits |= MPPE_BIT_COMP;
-+	    olen = complen + PPP_HDRLEN + (MPPE_OVHD / 2);
-+	    (state->stats).comp_bytes += olen;
-+	    (state->stats).comp_packets++;
-+	}
-+    } else { /* Do encryption with or without compression */
-+	state->bits |= MPPE_BIT_ENCRYPTED;
-+	if (!state->mppc && state->mppe) { /* Do only encryption */
-+	    /* read from ibuf, write to wptr, adjust for PPP_HDRLEN */
-+	    arc4_encrypt(state, ibuf, isize - off, wptr);
-+	    olen = isize - (off - 2) + MPPE_OVHD;
-+	    (state->stats).inc_bytes += olen;
-+	    (state->stats).inc_packets++;
-+	} else { /* Do compression and then encryption - RFC3078 */
-+	    complen = mppc_compress(state, ibuf, wptr, isize - off,
-+				    osize - PPP_HDRLEN - (MPPE_OVHD / 2));
-+	    /*
-+	     * TODO: Implement an heuristics to handle packet expansion in a smart
-+	     * way. Now, when a packet expands, we send it as uncompressed and
-+	     * when next packet is sent we have to reset compressor's history.
-+	     * Maybe it would be good to send such packet as compressed in order
-+	     * to keep history's continuity.
-+	     */
-+	    if ((complen > isize) || (complen > osize - PPP_HDRLEN) ||
-+		(complen == 0)) {
-+		/* packet expands */
-+		state->nextflushed = 1;
-+		arc4_encrypt(state, ibuf, isize - off, wptr);
-+		olen = isize - (off - 2) + MPPE_OVHD;
-+		(state->stats).inc_bytes += olen;
-+		(state->stats).inc_packets++;
-+	    } else {
-+		state->bits |= MPPE_BIT_COMP;
-+		/* Hack warning !!! RC4 implementation which we use does
-+		   encryption "in place" - it means that input and output
-+		   buffers can be *the same* memory area. Therefore we don't
-+		   need to use a temporary buffer. But be careful - other
-+		   implementations don't have to be so nice.
-+		   I used to use ibuf as temporary buffer here, but it led
-+		   packet sniffers into error. Thanks to Wilfried Weissmann
-+		   for pointing that. */
-+		arc4_encrypt(state, wptr, complen, wptr);
-+		olen = complen + PPP_HDRLEN + (MPPE_OVHD / 2);
-+		(state->stats).comp_bytes += olen;
-+		(state->stats).comp_packets++;
-+	    }
-+	}
-+    }
-+
-+    /* write status bits and coherency counter into the output buffer */
-+    wptr = obuf + PPP_HDRLEN;
-+    wptr[0] = MPPE_CTRLHI(state);
-+    wptr[1] = MPPE_CTRLLO(state);
-+
-+    state->bits = 0;
-+
-+    (state->stats).unc_bytes += isize;
-+    (state->stats).unc_packets++;
-+
-+    return olen;
-+}
-+
-+/***************************/
-+/*** Decompression stuff ***/
-+/***************************/
-+static inline u32 getbits(const u8 *buf, const u32 n, u32 *i, u32 *l)
-+{
-+    static const u32 m[] = {0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff};
-+    u32 res, ol;
-+
-+    ol = *l;
-+    if (*l >= n) {
-+	*l = (*l) - n;
-+	res = (buf[*i] & m[ol]) >> (*l);
-+	if (*l == 0) {
-+	    *l = 8;
-+	    (*i)++;
-+	}
-+    } else {
-+	*l = 8 - n + (*l);
-+	res = (buf[(*i)++] & m[ol]) << 8;
-+	res = (res | buf[*i]) >> (*l);
-+    }
-+
-+    return res;
-+}
-+
-+static inline u32 getbyte(const u8 *buf, const u32 i, const u32 l)
-+{
-+    if (l == 8) {
-+	return buf[i];
-+    } else {
-+	return (((buf[i] << 8) | buf[i+1]) >> l) & 0xff;
-+    }
-+}
-+
-+static inline void lamecopy(u8 *dst, u8 *src, u32 len)
-+{
-+    while (len--)
-+	*dst++ = *src++;
-+}
-+
-+static int
-+mppc_decompress(struct ppp_mppe_state *state, unsigned char *ibuf,
-+		unsigned char *obuf, int isize, int osize)
-+{
-+    u32 olen, off, len, bits, val, sig, i, l;
-+    u8 *history, *s;
-+
-+    history = state->hist + state->histptr;
-+    olen = len = i = 0;
-+    l = 8;
-+    bits = isize * 8;
-+    while (bits >= 8) {
-+	val = getbyte(ibuf, i++, l);
-+	if (val < 0x80) {		/* literal byte < 0x80 */
-+	    if (state->histptr < 2*MPPE_HIST_LEN) {
-+		/* copy uncompressed byte to the history */
-+		(state->hist)[(state->histptr)++] = (u8) val;
-+	    } else {
-+		/* buffer overflow; drop packet */
-+		if (state->debug)
-+		    printk(KERN_ERR "%s%d: trying to write outside history "
-+			   "buffer\n", __FUNCTION__, state->unit);
-+		return DECOMP_ERROR;
-+	    }
-+	    olen++;
-+	    bits -= 8;
-+	    continue;
-+	}
-+
-+	sig = val & 0xc0;
-+	if (sig == 0x80) {		/* literal byte >= 0x80 */
-+	    if (state->histptr < 2*MPPE_HIST_LEN) {
-+		/* copy uncompressed byte to the history */
-+		(state->hist)[(state->histptr)++] = 
-+		    (u8) (0x80|((val&0x3f)<<1)|getbits(ibuf, 1 , &i ,&l));
-+	    } else {
-+		/* buffer overflow; drop packet */
-+		if (state->debug)
-+		    printk(KERN_ERR "%s%d: trying to write outside history "
-+			   "buffer\n", __FUNCTION__, state->unit);
-+		return DECOMP_ERROR;
-+	    }
-+	    olen++;
-+	    bits -= 9;
-+	    continue;
-+	}
-+
-+	/* Not a literal byte so it must be an (offset,length) pair */
-+	/* decode offset */
-+	sig = val & 0xf0;
-+	if (sig == 0xf0) {		/* 10-bit offset; 0 <= offset < 64 */
-+	    off = (((val&0x0f)<<2)|getbits(ibuf, 2 , &i ,&l));
-+	    bits -= 10;
-+	} else {
-+	    if (sig == 0xe0) {		/* 12-bit offset; 64 <= offset < 320 */
-+		off = ((((val&0x0f)<<4)|getbits(ibuf, 4 , &i ,&l))+64);
-+		bits -= 12;
-+	    } else {
-+		if ((sig&0xe0) == 0xc0) {/* 16-bit offset; 320 <= offset < 8192 */
-+		    off = ((((val&0x1f)<<8)|getbyte(ibuf, i++, l))+320);
-+		    bits -= 16;
-+		    if (off > MPPE_HIST_LEN - 1) {
-+			if (state->debug)
-+			    printk(KERN_DEBUG "%s%d: too big offset value: %d\n",
-+				   __FUNCTION__, state->unit, off);
-+			return DECOMP_ERROR;
-+		    }
-+		} else {		/* this shouldn't happen */
-+		    if (state->debug)
-+			printk(KERN_DEBUG "%s%d: cannot decode offset value\n",
-+			       __FUNCTION__, state->unit);
-+		    return DECOMP_ERROR;
-+		}
-+	    }
-+	}
-+	/* decode length of match */
-+	val = getbyte(ibuf, i, l);
-+	if ((val & 0x80) == 0x00) {			/* len = 3 */
-+	    len = 3;
-+	    bits--;
-+	    getbits(ibuf, 1 , &i ,&l);
-+	} else if ((val & 0xc0) == 0x80) {		/* 4 <= len < 8 */
-+	    len = 0x04 | ((val>>4) & 0x03);
-+	    bits -= 4;
-+	    getbits(ibuf, 4 , &i ,&l);
-+	} else if ((val & 0xe0) == 0xc0) {		/* 8 <= len < 16 */
-+	    len = 0x08 | ((val>>2) & 0x07);
-+	    bits -= 6;
-+	    getbits(ibuf, 6 , &i ,&l);
-+	} else if ((val & 0xf0) == 0xe0) {		/* 16 <= len < 32 */
-+	    len = 0x10 | (val & 0x0f);
-+	    bits -= 8;
-+	    i++;
-+	} else {
-+	    bits -= 8;
-+	    val = (val << 8) | getbyte(ibuf, ++i, l);
-+	    if ((val & 0xf800) == 0xf000) {		/* 32 <= len < 64 */
-+		len = 0x0020 | ((val >> 6) & 0x001f);
-+		bits -= 2;
-+		getbits(ibuf, 2 , &i ,&l);
-+	    } else if ((val & 0xfc00) == 0xf800) {	/* 64 <= len < 128 */
-+		len = 0x0040 | ((val >> 4) & 0x003f);
-+		bits -= 4;
-+		getbits(ibuf, 4 , &i ,&l);
-+	    } else if ((val & 0xfe00) == 0xfc00) {	/* 128 <= len < 256 */
-+		len = 0x0080 | ((val >> 2) & 0x007f);
-+		bits -= 6;
-+		getbits(ibuf, 6 , &i ,&l);
-+	    } else if ((val & 0xff00) == 0xfe00) {	/* 256 <= len < 512 */
-+		len = 0x0100 | (val & 0x00ff);
-+		bits -= 8;
-+		i++;
-+	    } else {
-+		bits -= 8;
-+		val = (val << 8) | getbyte(ibuf, ++i, l);
-+		if ((val & 0xff8000) == 0xff0000) {	/* 512 <= len < 1024 */
-+		    len = 0x000200 | ((val >> 6) & 0x0001ff);
-+		    bits -= 2;
-+		    getbits(ibuf, 2 , &i ,&l);
-+		} else if ((val & 0xffc000) == 0xff8000) {/* 1024 <= len < 2048 */
-+		    len = 0x000400 | ((val >> 4) & 0x0003ff);
-+		    bits -= 4;
-+		    getbits(ibuf, 4 , &i ,&l);
-+		} else if ((val & 0xffe000) == 0xffc000) {/* 2048 <= len < 4096 */
-+		    len = 0x000800 | ((val >> 2) & 0x0007ff);
-+		    bits -= 6;
-+		    getbits(ibuf, 6 , &i ,&l);
-+		} else if ((val & 0xfff000) == 0xffe000) {/* 4096 <= len < 8192 */
-+		    len = 0x001000 | (val & 0x000fff);
-+		    bits -= 8;
-+		    i++;
-+		} else {				/* this shouldn't happen */
-+		    if (state->debug)
-+			printk(KERN_DEBUG "%s%d: wrong length code: 0x%X\n",
-+			       __FUNCTION__, state->unit, val);
-+		    return DECOMP_ERROR;
-+		}
-+	    }
-+	}
-+	s = state->hist + state->histptr;
-+	state->histptr += len;
-+	olen += len;
-+	if (state->histptr < 2*MPPE_HIST_LEN) {
-+	    /* copy uncompressed bytes to the history */
-+
-+	    /* In some cases len may be greater than off. It means that memory
-+	     * areas pointed by s and s-off overlap. I had used memmove() here
-+	     * because I thought that it acts as libc's version. Unfortunately,
-+	     * I was wrong. :-) I got strange errors sometimes. Wilfried suggested
-+	     * using of byte by byte copying here and strange errors disappeared.
-+	     */
-+	    lamecopy(s, s - off, len);
-+	} else {
-+	    /* buffer overflow; drop packet */
-+	    if (state->debug)
-+		printk(KERN_ERR "%s%d: trying to write outside history "
-+		       "buffer\n", __FUNCTION__, state->unit);
-+	    return DECOMP_ERROR;
-+	}
-+    }
-+
-+    /* Do PFC decompression */
-+    len = olen;
-+    if ((history[0] & 0x01) != 0) {
-+	obuf[0] = 0;
-+	obuf++;
-+	len++;
-+    }
-+
-+    if (len <= osize) {
-+	/* copy uncompressed packet to the output buffer */
-+	memcpy(obuf, history, olen);
-+    } else {
-+	/* buffer overflow; drop packet */
-+	if (state->debug)
-+	    printk(KERN_ERR "%s%d: too big uncompressed packet: %d\n",
-+		   __FUNCTION__, state->unit, len + (PPP_HDRLEN / 2));
-+	return DECOMP_ERROR;
-+    }
-+
-+    return (int) len;
-+}
-+
-+int
-+mppe_decompress(void *arg, unsigned char *ibuf, int isize,
-+		unsigned char *obuf, int osize)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
-+    int seq, bits, uncomplen;
-+
-+    if (isize <= PPP_HDRLEN + MPPE_OVHD) {
-+	if (state->debug) {
-+	    printk(KERN_DEBUG "%s%d: short packet (len=%d)\n",  __FUNCTION__,
-+		   state->unit, isize);
-+	}
-+	return DECOMP_ERROR;
-+    }
-+
-+    /* Get coherency counter and control bits from input buffer */
-+    seq = MPPE_CCOUNT(ibuf);
-+    bits = MPPE_BITS(ibuf);
-+
-+    if (state->stateless) {
-+	/* RFC 3078, sec 8.1. */
-+	mppe_increase_ccount(state);
-+	if ((seq != state->ccount) && state->debug)
-+	    printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n",
-+		   __FUNCTION__, state->unit, seq, state->ccount);
-+	while (seq != state->ccount)
-+	    mppe_increase_ccount(state);
-+    } else {
-+	/* RFC 3078, sec 8.2. */
-+	if (state->flushexpected) { /* discard state */
-+	    if ((bits & MPPE_BIT_FLUSHED)) { /* we received expected FLUSH bit */
-+		while (seq != state->ccount)
-+		    mppe_increase_ccount(state);
-+		state->flushexpected = 0;
-+	    } else /* drop packet*/
-+		return DECOMP_ERROR;
-+	} else { /* normal state */
-+	    mppe_increase_ccount(state);
-+	    if (seq != state->ccount) {
-+		/* Packet loss detected, enter the discard state. */
-+		if (state->debug)
-+		    printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n",
-+			   __FUNCTION__, state->unit, seq, state->ccount);
-+		state->flushexpected = 1;
-+		return DECOMP_ERROR;
-+	    }
-+	}
-+	if (state->mppe && (bits & MPPE_BIT_FLUSHED)) {
-+	    arc4_setkey(state, state->session_key, state->keylen);
-+	}
-+    }
-+
-+    if (state->mppc && (bits & (MPPE_BIT_FLUSHED | MPPE_BIT_RESET))) {
-+	state->histptr = MPPE_HIST_LEN;
-+	if ((bits & MPPE_BIT_FLUSHED)) {
-+	    memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8));
-+	} else
-+	    if ((bits & MPPE_BIT_RESET)) {
-+		memcpy(state->hist, state->hist + MPPE_HIST_LEN, MPPE_HIST_LEN);
-+	    }
-+    }
-+
-+    /* Fill in the first part of the PPP header. The protocol field
-+       comes from the decompressed data. */
-+    obuf[0] = PPP_ADDRESS(ibuf);
-+    obuf[1] = PPP_CONTROL(ibuf);
-+    obuf += PPP_HDRLEN / 2;
-+
-+    if (state->mppe) { /* process encrypted packet */
-+	if ((bits & MPPE_BIT_ENCRYPTED)) {
-+	    /* OK, packet encrypted, so decrypt it */
-+	    if (state->mppc && (bits & MPPE_BIT_COMP)) {
-+		/* Hack warning !!! RC4 implementation which we use does
-+		   decryption "in place" - it means that input and output
-+		   buffers can be *the same* memory area. Therefore we don't
-+		   need to use a temporary buffer. But be careful - other
-+		   implementations don't have to be so nice. */
-+		arc4_decrypt(state, ibuf + PPP_HDRLEN +	(MPPE_OVHD / 2), isize -
-+			     PPP_HDRLEN - (MPPE_OVHD / 2), ibuf + PPP_HDRLEN +
-+			     (MPPE_OVHD / 2));
-+		uncomplen = mppc_decompress(state, ibuf + PPP_HDRLEN +
-+					    (MPPE_OVHD / 2), obuf, isize -
-+					    PPP_HDRLEN - (MPPE_OVHD / 2),
-+					    osize - (PPP_HDRLEN / 2));
-+		if (uncomplen == DECOMP_ERROR) {
-+		    state->flushexpected = 1;
-+		    return DECOMP_ERROR;
-+		}
-+		uncomplen += PPP_HDRLEN / 2;
-+		(state->stats).comp_bytes += isize;
-+		(state->stats).comp_packets++;
-+	    } else {
-+		uncomplen = isize - MPPE_OVHD;
-+		/* Decrypt the first byte in order to check if it is
-+		   compressed or uncompressed protocol field */
-+		arc4_decrypt(state, ibuf + PPP_HDRLEN +	(MPPE_OVHD / 2), 1, obuf);
-+		/* Do PFC decompression */
-+		if ((obuf[0] & 0x01) != 0) {
-+		    obuf[1] = obuf[0];
-+		    obuf[0] = 0;
-+		    obuf++;
-+		    uncomplen++;
-+		}
-+		/* And finally, decrypt the rest of the frame. */
-+		arc4_decrypt(state, ibuf + PPP_HDRLEN +	(MPPE_OVHD / 2) + 1,
-+			     isize - PPP_HDRLEN - (MPPE_OVHD / 2) - 1, obuf + 1);
-+		(state->stats).inc_bytes += isize;
-+		(state->stats).inc_packets++;
-+	    }
-+	} else { /* this shouldn't happen */
-+	    if (state->debug)
-+		printk(KERN_ERR "%s%d: encryption negotiated but not an "
-+		       "encrypted packet received\n", __FUNCTION__, state->unit);
-+	    mppe_change_key(state, 0);
-+	    state->flushexpected = 1;
-+	    return DECOMP_ERROR;
-+	}
-+    } else {
-+	if (state->mppc) { /* no MPPE, only MPPC */
-+	    if ((bits & MPPE_BIT_COMP)) {
-+		uncomplen = mppc_decompress(state, ibuf + PPP_HDRLEN +
-+					    (MPPE_OVHD / 2), obuf, isize -
-+					    PPP_HDRLEN - (MPPE_OVHD / 2),
-+					    osize - (PPP_HDRLEN / 2));
-+		if (uncomplen == DECOMP_ERROR) {
-+		    state->flushexpected = 1;
-+		    return DECOMP_ERROR;
-+		}
-+		uncomplen += PPP_HDRLEN / 2;
-+		(state->stats).comp_bytes += isize;
-+		(state->stats).comp_packets++;
-+	    } else {
-+		memcpy(obuf, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2), isize -
-+		       PPP_HDRLEN - (MPPE_OVHD / 2));
-+		uncomplen = isize - MPPE_OVHD;
-+		(state->stats).inc_bytes += isize;
-+		(state->stats).inc_packets++;
-+	    }
-+	} else { /* this shouldn't happen */
-+	    if (state->debug)
-+		printk(KERN_ERR "%s%d: error - not an  MPPC or MPPE frame "
-+		       "received\n", __FUNCTION__, state->unit);
-+	    state->flushexpected = 1;
-+	    return DECOMP_ERROR;
-+	}
-+    }
-+
-+    (state->stats).unc_bytes += uncomplen;
-+    (state->stats).unc_packets++;
-+
-+    return uncomplen;
-+}
-+
-+
-+/************************************************************
-+ * Module interface table
-+ ************************************************************/
-+
-+/* These are in ppp_generic.c */
-+extern int  ppp_register_compressor   (struct compressor *cp);
-+extern void ppp_unregister_compressor (struct compressor *cp);
-+
-+/*
-+ * Functions exported to ppp_generic.c.
-+ *
-+ * In case of MPPC/MPPE there is no need to process incompressible data
-+ * because such a data is sent in MPPC/MPPE frame. Therefore the (*incomp)
-+ * callback function isn't needed.
-+ */
-+struct compressor ppp_mppe = {
-+    CI_MPPE,		/* compress_proto */
-+    mppe_comp_alloc,	/* comp_alloc */
-+    mppe_comp_free,	/* comp_free */
-+    mppe_comp_init,	/* comp_init */
-+    mppe_comp_reset,	/* comp_reset */
-+    mppe_compress,	/* compress */
-+    mppe_stats,		/* comp_stat */
-+    mppe_decomp_alloc,	/* decomp_alloc */
-+    mppe_comp_free,	/* decomp_free */
-+    mppe_decomp_init,	/* decomp_init */
-+    mppe_decomp_reset,	/* decomp_reset */
-+    mppe_decompress,	/* decompress */
-+    NULL,		/* incomp */
-+    mppe_stats,		/* decomp_stat */
-+};
-+
-+/************************************************************
-+ * Module support routines
-+ ************************************************************/
-+
-+int __init mppe_module_init(void)
-+{
-+    int answer;
-+
-+    /* When the module is compiled into kernel, it is initialized before
-+     * CryptoAPI. Therefore the code below reports that there is no crypto
-+     * stuff in the kernel. Marlon de Boer who has pointed out the problem,
-+     * has sent also a message to CryptoAPI developers, so maybe in the future
-+     * the code will be uncommented.
-+     *
-+    if (!(crypto_alg_available("arc4", 0) && crypto_alg_available("sha1", 0))) {
-+	printk(KERN_ERR "Kernel doesn't provide ARC4 and/or SHA1 algorithms "
-+	       "required by MPPE/MPPC. Check CryptoAPI configuration.\n");
-+	return -ENODEV;
-+    }
-+    */
-+
-+    /* Allocate space for SHAPad1, SHAPad2 and ... */
-+    sha_pad = kmalloc(sizeof(struct sha_pad), GFP_KERNEL);
-+    if (sha_pad == NULL)
-+	return -ENOMEM;
-+    /* ... initialize them */
-+    memset(sha_pad->sha_pad1, 0x00, sizeof(sha_pad->sha_pad1));
-+    memset(sha_pad->sha_pad2, 0xf2, sizeof(sha_pad->sha_pad2));
-+
-+    answer = ppp_register_compressor(&ppp_mppe);
-+    if (answer == 0) {
-+	printk(KERN_INFO "MPPE/MPPC encryption/compression module registered\n");
-+    }
-+    return answer;
-+}
-+
-+void __exit mppe_module_cleanup(void)
-+{
-+    kfree(sha_pad);
-+    ppp_unregister_compressor(&ppp_mppe);
-+    printk(KERN_INFO "MPPE/MPPC encryption/compression module unregistered\n");
-+}
-+
-+module_init(mppe_module_init);
-+module_exit(mppe_module_cleanup);
-+
-+MODULE_AUTHOR("Jan Dubiec <jdx@slackware.pl>");
-+MODULE_DESCRIPTION("MPPE/MPPC encryption/compression module for Linux");
-+MODULE_LICENSE("Dual BSD/GPL");
-diff -ruN linux-2.4.29.orig/include/linux/ppp-comp.h linux-2.4.29/include/linux/ppp-comp.h
---- linux-2.4.29.orig/include/linux/ppp-comp.h	2005-02-02 22:18:25.000000000 +0100
-+++ linux-2.4.29/include/linux/ppp-comp.h	2005-02-02 22:41:01.000000000 +0100
-@@ -28,7 +28,7 @@
-  */
- 
- /*
-- *  ==FILEVERSION 980319==
-+ *  ==FILEVERSION 20040509==
-  *
-  *  NOTE TO MAINTAINERS:
-  *     If you modify this file at all, please set the above date.
-@@ -78,7 +78,7 @@
- 
- 	/* Compress a packet */
- 	int     (*compress) (void *state, unsigned char *rptr,
--			      unsigned char *obuf, int isize, int osize);
-+			     unsigned char *obuf, int isize, int osize);
- 
- 	/* Return compression statistics */
- 	void	(*comp_stat) (void *state, struct compstat *stats);
-@@ -99,7 +99,7 @@
- 
- 	/* Decompress a packet. */
- 	int	(*decompress) (void *state, unsigned char *ibuf, int isize,
--				unsigned char *obuf, int osize);
-+			       unsigned char *obuf, int osize);
- 
- 	/* Update state for an incompressible packet received */
- 	void	(*incomp) (void *state, unsigned char *ibuf, int icnt);
-@@ -187,6 +187,42 @@
- #define DEFLATE_CHK_SEQUENCE	0
- 
- /*
-+ * Definitions for MPPE/MPPC.
-+ */
-+
-+#define CI_MPPE			18	/* config option for MPPE */
-+#define CILEN_MPPE		6	/* length of config option */
-+
-+#define MPPE_OVHD		4	/* MPPE overhead */
-+#define MPPE_MAX_KEY_LEN	16	/* largest key length (128-bit) */
-+
-+#define MPPE_STATELESS          0x01	/* configuration bit H */
-+#define MPPE_40BIT              0x20	/* configuration bit L */
-+#define MPPE_56BIT              0x80	/* configuration bit M */
-+#define MPPE_128BIT             0x40	/* configuration bit S */
-+#define MPPE_MPPC               0x01	/* configuration bit C */
-+
-+/*
-+ * Definitions for Stac LZS.
-+ */
-+
-+#define CI_LZS			17	/* config option for Stac LZS */
-+#define CILEN_LZS		5	/* length of config option */
-+
-+#define LZS_OVHD		4	/* max. LZS overhead */
-+#define LZS_HIST_LEN		2048	/* LZS history size */
-+#define LZS_MAX_CCOUNT		0x0FFF	/* max. coherency counter value */
-+
-+#define LZS_MODE_NONE		0
-+#define LZS_MODE_LCB		1
-+#define LZS_MODE_CRC		2
-+#define LZS_MODE_SEQ		3
-+#define LZS_MODE_EXT		4
-+
-+#define LZS_EXT_BIT_FLUSHED	0x80	/* bit A */
-+#define LZS_EXT_BIT_COMP	0x20	/* bit C */
-+
-+/*
-  * Definitions for other, as yet unsupported, compression methods.
-  */
- 
diff --git a/openwrt/target/linux/generic-2.4/patches/107-cifs.patch b/openwrt/target/linux/generic-2.4/patches/107-cifs.patch
deleted file mode 100644
index bdccf4de9f..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/107-cifs.patch
+++ /dev/null
@@ -1,22022 +0,0 @@
-diff -urN linux-2.4.29.old/Documentation/Configure.help linux-2.4.29/Documentation/Configure.help
---- linux-2.4.29.old/Documentation/Configure.help	2005-03-21 19:30:22.000000000 +0100
-+++ linux-2.4.29/Documentation/Configure.help	2005-03-21 19:36:51.000000000 +0100
-@@ -17943,6 +17943,34 @@
- 
-   If you don't know what all this is about, say N.
- 
-+CIFS (Common Internet File System) support
-+CONFIG_CIFS
-+  This is the client VFS module for the Common Internet File System
-+  (CIFS) protocol which is the successor to the Server Message Block 
-+  (SMB) protocol, the native file sharing mechanism for most early
-+  PC operating systems.  CIFS is fully supported by current network
-+  file servers such as Windows 2000, Windows 2003 (including  
-+  Windows XP) as well by Samba (which provides excellent CIFS
-+  server support for Linux and many other operating systems).  
-+  The smbfs module should be used instead of this cifs module for
-+  mounting to older SMB servers such as OS/2.  The smbfs and cifs
-+  modules can coexist and do not conflict.
-+
-+  The intent of this module is to provide the most advanced network
-+  file system function for CIFS compliant servers, including better
-+  POSIX compliance, secure per-user session establishment, high
-+  performance safe distributed caching (oplock), optional packet
-+  signing, Unicode support and other internationalization improvements
-+  For more information see the project page at
-+  http://us1.samba.org/samba/Linux_CIFS_client.html 
-+
-+CIFS Debugging
-+CONFIG_CIFS_DEBUG
-+  If you are experiencing any problems with the CIFS filesystem, say
-+  Y here.  This will result in additional debugging messages to be
-+  written to the system log.  Under normal circumstances, this
-+  results in very little overhead.  
-+
- SMB file system support (to mount Windows shares etc.)
- CONFIG_SMB_FS
-   SMB (Server Message Block) is the protocol Windows for Workgroups
-diff -urN linux-2.4.29.old/Documentation/filesystems/00-INDEX linux-2.4.29/Documentation/filesystems/00-INDEX
---- linux-2.4.29.old/Documentation/filesystems/00-INDEX	2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.29/Documentation/filesystems/00-INDEX	2005-03-21 19:36:51.000000000 +0100
-@@ -10,6 +10,8 @@
- 	- info for the BeOS file system (BFS)
- bfs.txt
- 	- info for the SCO UnixWare Boot Filesystem (BFS).
-+cifs.txt
-+	- info on the Common Internet File System (CIFS)
- coda.txt
- 	- description of the CODA filesystem.
- cramfs.txt
-diff -urN linux-2.4.29.old/Documentation/filesystems/cifs.txt linux-2.4.29/Documentation/filesystems/cifs.txt
---- linux-2.4.29.old/Documentation/filesystems/cifs.txt	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/Documentation/filesystems/cifs.txt	2005-03-21 19:36:51.000000000 +0100
-@@ -0,0 +1,51 @@
-+  This is the client VFS module for the Common Internet File System
-+  (CIFS) protocol which is the successor to the Server Message Block 
-+  (SMB) protocol, the native file sharing mechanism for most early
-+  PC operating systems.  CIFS is fully supported by current network
-+  file servers such as Windows 2000, Windows 2003 (including  
-+  Windows XP) as well by Samba (which provides excellent CIFS
-+  server support for Linux and many other operating systems), so
-+  this network filesystem client can mount to a wide variety of
-+  servers.  The smbfs module should be used instead of this cifs module
-+  for mounting to older SMB servers such as OS/2.  The smbfs and cifs
-+  modules can coexist and do not conflict.  The CIFS VFS filesystem
-+  module is designed to work well with servers that implement the
-+  newer versions (dialects) of the SMB/CIFS protocol such as Samba, 
-+  the program written by Andrew Tridgell that turns any Unix host 
-+  into a SMB/CIFS file server.
-+
-+  The intent of this module is to provide the most advanced network
-+  file system function for CIFS compliant servers, including better
-+  POSIX compliance, secure per-user session establishment, high
-+  performance safe distributed caching (oplock), optional packet
-+  signing, large files, Unicode support and other internationalization
-+  improvements. Since both Samba server and this filesystem client support
-+  the CIFS Unix extensions, the combination can provide a reasonable 
-+  alternative to NFSv4 for fileserving in some Linux to Linux environments,
-+  not just in Linux to Windows environments.
-+
-+  This filesystem has an optional mount utility (mount.cifs) that can
-+  be obtained from the project page and installed in the path in the same
-+  directory with the other mount helpers (such as mount.smbfs). 
-+  Mounting using the cifs filesystem without installing the mount helper
-+  requires specifying the server's ip address.
-+
-+  For Linux 2.4:
-+    mount //anything/here /mnt_target -o
-+            user=username,pass=password,unc=//ip_address_of_server/sharename
-+
-+  For Linux 2.5: 
-+    mount //ip_address_of_server/sharename /mnt_target -o user=username, pass=password
-+
-+
-+  For more information on the module see the project page at
-+
-+      http://us1.samba.org/samba/Linux_CIFS_client.html 
-+
-+  For more information on CIFS see:
-+
-+      http://www.snia.org/tech_activities/CIFS
-+
-+  or the Samba site:
-+     
-+      http://www.samba.org
-diff -urN linux-2.4.29.old/fs/cifs/asn1.c linux-2.4.29/fs/cifs/asn1.c
---- linux-2.4.29.old/fs/cifs/asn1.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/asn1.c	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,614 @@
-+/* 
-+ * The ASB.1/BER parsing code is derived from ip_nat_snmp_basic.c which was in
-+ * turn derived from the gxsnmp package by Gregory McLean & Jochen Friedrich
-+ *      
-+ * Copyright (c) 2000 RP Internet (www.rpi.net.au).
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include "cifspdu.h"
-+#include "cifsglob.h"
-+#include "cifs_debug.h"
-+
-+/*****************************************************************************
-+ *
-+ * Basic ASN.1 decoding routines (gxsnmp author Dirk Wisse)
-+ *
-+ *****************************************************************************/
-+
-+/* Class */
-+#define ASN1_UNI	0	/* Universal */
-+#define ASN1_APL	1	/* Application */
-+#define ASN1_CTX	2	/* Context */
-+#define ASN1_PRV	3	/* Private */
-+
-+/* Tag */
-+#define ASN1_EOC	0	/* End Of Contents or N/A */
-+#define ASN1_BOL	1	/* Boolean */
-+#define ASN1_INT	2	/* Integer */
-+#define ASN1_BTS	3	/* Bit String */
-+#define ASN1_OTS	4	/* Octet String */
-+#define ASN1_NUL	5	/* Null */
-+#define ASN1_OJI	6	/* Object Identifier  */
-+#define ASN1_OJD	7	/* Object Description */
-+#define ASN1_EXT	8	/* External */
-+#define ASN1_SEQ	16	/* Sequence */
-+#define ASN1_SET	17	/* Set */
-+#define ASN1_NUMSTR	18	/* Numerical String */
-+#define ASN1_PRNSTR	19	/* Printable String */
-+#define ASN1_TEXSTR	20	/* Teletext String */
-+#define ASN1_VIDSTR	21	/* Video String */
-+#define ASN1_IA5STR	22	/* IA5 String */
-+#define ASN1_UNITIM	23	/* Universal Time */
-+#define ASN1_GENTIM	24	/* General Time */
-+#define ASN1_GRASTR	25	/* Graphical String */
-+#define ASN1_VISSTR	26	/* Visible String */
-+#define ASN1_GENSTR	27	/* General String */
-+
-+/* Primitive / Constructed methods*/
-+#define ASN1_PRI	0	/* Primitive */
-+#define ASN1_CON	1	/* Constructed */
-+
-+/*
-+ * Error codes.
-+ */
-+#define ASN1_ERR_NOERROR		0
-+#define ASN1_ERR_DEC_EMPTY		2
-+#define ASN1_ERR_DEC_EOC_MISMATCH	3
-+#define ASN1_ERR_DEC_LENGTH_MISMATCH	4
-+#define ASN1_ERR_DEC_BADVALUE		5
-+
-+#define SPNEGO_OID_LEN 7
-+#define NTLMSSP_OID_LEN  10
-+unsigned long SPNEGO_OID[7] = { 1, 3, 6, 1, 5, 5, 2 };
-+unsigned long NTLMSSP_OID[10] = { 1, 3, 6, 1, 4, 1, 311, 2, 2, 10 };
-+
-+/* 
-+ * ASN.1 context.
-+ */
-+struct asn1_ctx {
-+	int error;		/* Error condition */
-+	unsigned char *pointer;	/* Octet just to be decoded */
-+	unsigned char *begin;	/* First octet */
-+	unsigned char *end;	/* Octet after last octet */
-+};
-+
-+/*
-+ * Octet string (not null terminated)
-+ */
-+struct asn1_octstr {
-+	unsigned char *data;
-+	unsigned int len;
-+};
-+
-+static void
-+asn1_open(struct asn1_ctx *ctx, unsigned char *buf, unsigned int len)
-+{
-+	ctx->begin = buf;
-+	ctx->end = buf + len;
-+	ctx->pointer = buf;
-+	ctx->error = ASN1_ERR_NOERROR;
-+}
-+
-+static unsigned char
-+asn1_octet_decode(struct asn1_ctx *ctx, unsigned char *ch)
-+{
-+	if (ctx->pointer >= ctx->end) {
-+		ctx->error = ASN1_ERR_DEC_EMPTY;
-+		return 0;
-+	}
-+	*ch = *(ctx->pointer)++;
-+	return 1;
-+}
-+
-+static unsigned char
-+asn1_tag_decode(struct asn1_ctx *ctx, unsigned int *tag)
-+{
-+	unsigned char ch;
-+
-+	*tag = 0;
-+
-+	do {
-+		if (!asn1_octet_decode(ctx, &ch))
-+			return 0;
-+		*tag <<= 7;
-+		*tag |= ch & 0x7F;
-+	} while ((ch & 0x80) == 0x80);
-+	return 1;
-+}
-+
-+static unsigned char
-+asn1_id_decode(struct asn1_ctx *ctx,
-+	       unsigned int *cls, unsigned int *con, unsigned int *tag)
-+{
-+	unsigned char ch;
-+
-+	if (!asn1_octet_decode(ctx, &ch))
-+		return 0;
-+
-+	*cls = (ch & 0xC0) >> 6;
-+	*con = (ch & 0x20) >> 5;
-+	*tag = (ch & 0x1F);
-+
-+	if (*tag == 0x1F) {
-+		if (!asn1_tag_decode(ctx, tag))
-+			return 0;
-+	}
-+	return 1;
-+}
-+
-+static unsigned char
-+asn1_length_decode(struct asn1_ctx *ctx, unsigned int *def, unsigned int *len)
-+{
-+	unsigned char ch, cnt;
-+
-+	if (!asn1_octet_decode(ctx, &ch))
-+		return 0;
-+
-+	if (ch == 0x80)
-+		*def = 0;
-+	else {
-+		*def = 1;
-+
-+		if (ch < 0x80)
-+			*len = ch;
-+		else {
-+			cnt = (unsigned char) (ch & 0x7F);
-+			*len = 0;
-+
-+			while (cnt > 0) {
-+				if (!asn1_octet_decode(ctx, &ch))
-+					return 0;
-+				*len <<= 8;
-+				*len |= ch;
-+				cnt--;
-+			}
-+		}
-+	}
-+	return 1;
-+}
-+
-+static unsigned char
-+asn1_header_decode(struct asn1_ctx *ctx,
-+		   unsigned char **eoc,
-+		   unsigned int *cls, unsigned int *con, unsigned int *tag)
-+{
-+	unsigned int def, len;
-+
-+	if (!asn1_id_decode(ctx, cls, con, tag))
-+		return 0;
-+
-+	if (!asn1_length_decode(ctx, &def, &len))
-+		return 0;
-+
-+	if (def)
-+		*eoc = ctx->pointer + len;
-+	else
-+		*eoc = NULL;
-+	return 1;
-+}
-+
-+static unsigned char
-+asn1_eoc_decode(struct asn1_ctx *ctx, unsigned char *eoc)
-+{
-+	unsigned char ch;
-+
-+	if (eoc == 0) {
-+		if (!asn1_octet_decode(ctx, &ch))
-+			return 0;
-+
-+		if (ch != 0x00) {
-+			ctx->error = ASN1_ERR_DEC_EOC_MISMATCH;
-+			return 0;
-+		}
-+
-+		if (!asn1_octet_decode(ctx, &ch))
-+			return 0;
-+
-+		if (ch != 0x00) {
-+			ctx->error = ASN1_ERR_DEC_EOC_MISMATCH;
-+			return 0;
-+		}
-+		return 1;
-+	} else {
-+		if (ctx->pointer != eoc) {
-+			ctx->error = ASN1_ERR_DEC_LENGTH_MISMATCH;
-+			return 0;
-+		}
-+		return 1;
-+	}
-+}
-+
-+/* static unsigned char asn1_null_decode(struct asn1_ctx *ctx,
-+				      unsigned char *eoc)
-+{
-+	ctx->pointer = eoc;
-+	return 1;
-+}
-+
-+static unsigned char asn1_long_decode(struct asn1_ctx *ctx,
-+				      unsigned char *eoc, long *integer)
-+{
-+	unsigned char ch;
-+	unsigned int len;
-+
-+	if (!asn1_octet_decode(ctx, &ch))
-+		return 0;
-+
-+	*integer = (signed char) ch;
-+	len = 1;
-+
-+	while (ctx->pointer < eoc) {
-+		if (++len > sizeof(long)) {
-+			ctx->error = ASN1_ERR_DEC_BADVALUE;
-+			return 0;
-+		}
-+
-+		if (!asn1_octet_decode(ctx, &ch))
-+			return 0;
-+
-+		*integer <<= 8;
-+		*integer |= ch;
-+	}
-+	return 1;
-+}
-+
-+static unsigned char asn1_uint_decode(struct asn1_ctx *ctx,
-+				      unsigned char *eoc,
-+				      unsigned int *integer)
-+{
-+	unsigned char ch;
-+	unsigned int len;
-+
-+	if (!asn1_octet_decode(ctx, &ch))
-+		return 0;
-+
-+	*integer = ch;
-+	if (ch == 0)
-+		len = 0;
-+	else
-+		len = 1;
-+
-+	while (ctx->pointer < eoc) {
-+		if (++len > sizeof(unsigned int)) {
-+			ctx->error = ASN1_ERR_DEC_BADVALUE;
-+			return 0;
-+		}
-+
-+		if (!asn1_octet_decode(ctx, &ch))
-+			return 0;
-+
-+		*integer <<= 8;
-+		*integer |= ch;
-+	}
-+	return 1;
-+}
-+
-+static unsigned char asn1_ulong_decode(struct asn1_ctx *ctx,
-+				       unsigned char *eoc,
-+				       unsigned long *integer)
-+{
-+	unsigned char ch;
-+	unsigned int len;
-+
-+	if (!asn1_octet_decode(ctx, &ch))
-+		return 0;
-+
-+	*integer = ch;
-+	if (ch == 0)
-+		len = 0;
-+	else
-+		len = 1;
-+
-+	while (ctx->pointer < eoc) {
-+		if (++len > sizeof(unsigned long)) {
-+			ctx->error = ASN1_ERR_DEC_BADVALUE;
-+			return 0;
-+		}
-+
-+		if (!asn1_octet_decode(ctx, &ch))
-+			return 0;
-+
-+		*integer <<= 8;
-+		*integer |= ch;
-+	}
-+	return 1;
-+} 
-+
-+static unsigned char
-+asn1_octets_decode(struct asn1_ctx *ctx,
-+		   unsigned char *eoc,
-+		   unsigned char **octets, unsigned int *len)
-+{
-+	unsigned char *ptr;
-+
-+	*len = 0;
-+
-+	*octets = kmalloc(eoc - ctx->pointer, GFP_ATOMIC);
-+	if (*octets == NULL) {
-+		return 0;
-+	}
-+
-+	ptr = *octets;
-+	while (ctx->pointer < eoc) {
-+		if (!asn1_octet_decode(ctx, (unsigned char *) ptr++)) {
-+			kfree(*octets);
-+			*octets = NULL;
-+			return 0;
-+		}
-+		(*len)++;
-+	}
-+	return 1;
-+} */
-+
-+static unsigned char
-+asn1_subid_decode(struct asn1_ctx *ctx, unsigned long *subid)
-+{
-+	unsigned char ch;
-+
-+	*subid = 0;
-+
-+	do {
-+		if (!asn1_octet_decode(ctx, &ch))
-+			return 0;
-+
-+		*subid <<= 7;
-+		*subid |= ch & 0x7F;
-+	} while ((ch & 0x80) == 0x80);
-+	return 1;
-+}
-+
-+static unsigned char
-+asn1_oid_decode(struct asn1_ctx *ctx,
-+		unsigned char *eoc, unsigned long **oid, unsigned int *len)
-+{
-+	unsigned long subid;
-+	unsigned int size;
-+	unsigned long *optr;
-+
-+	size = eoc - ctx->pointer + 1;
-+	*oid = kmalloc(size * sizeof (unsigned long), GFP_ATOMIC);
-+	if (*oid == NULL) {
-+		return 0;
-+	}
-+
-+	optr = *oid;
-+
-+	if (!asn1_subid_decode(ctx, &subid)) {
-+		kfree(*oid);
-+		*oid = NULL;
-+		return 0;
-+	}
-+
-+	if (subid < 40) {
-+		optr[0] = 0;
-+		optr[1] = subid;
-+	} else if (subid < 80) {
-+		optr[0] = 1;
-+		optr[1] = subid - 40;
-+	} else {
-+		optr[0] = 2;
-+		optr[1] = subid - 80;
-+	}
-+
-+	*len = 2;
-+	optr += 2;
-+
-+	while (ctx->pointer < eoc) {
-+		if (++(*len) > size) {
-+			ctx->error = ASN1_ERR_DEC_BADVALUE;
-+			kfree(*oid);
-+			*oid = NULL;
-+			return 0;
-+		}
-+
-+		if (!asn1_subid_decode(ctx, optr++)) {
-+			kfree(*oid);
-+			*oid = NULL;
-+			return 0;
-+		}
-+	}
-+	return 1;
-+}
-+
-+static int
-+compare_oid(unsigned long *oid1, unsigned int oid1len,
-+	    unsigned long *oid2, unsigned int oid2len)
-+{
-+	unsigned int i;
-+
-+	if (oid1len != oid2len)
-+		return 0;
-+	else {
-+		for (i = 0; i < oid1len; i++) {
-+			if (oid1[i] != oid2[i])
-+				return 0;
-+		}
-+		return 1;
-+	}
-+}
-+
-+	/* BB check for endian conversion issues here */
-+
-+int
-+decode_negTokenInit(unsigned char *security_blob, int length,
-+		    enum securityEnum *secType)
-+{
-+	struct asn1_ctx ctx;
-+	unsigned char *end;
-+	unsigned char *sequence_end;
-+	unsigned long *oid;
-+	unsigned int cls, con, tag, oidlen, rc;
-+	int use_ntlmssp = FALSE;
-+
-+    *secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default */
-+
-+	/* cifs_dump_mem(" Received SecBlob ", security_blob, length); */
-+
-+	asn1_open(&ctx, security_blob, length);
-+
-+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-+		cFYI(1, ("Error decoding negTokenInit header "));
-+		return 0;
-+	} else if ((cls != ASN1_APL) || (con != ASN1_CON)
-+		   || (tag != ASN1_EOC)) {
-+		cFYI(1, ("cls = %d con = %d tag = %d", cls, con, tag));
-+		return 0;
-+	} else {
-+		/*      remember to free obj->oid */
-+		rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
-+		if (rc) {
-+			if ((tag == ASN1_OJI) && (cls == ASN1_PRI)) {
-+				rc = asn1_oid_decode(&ctx, end, &oid, &oidlen);
-+				if (rc) {
-+					rc = compare_oid(oid, oidlen,
-+							 SPNEGO_OID,
-+							 SPNEGO_OID_LEN);
-+					kfree(oid);
-+				}
-+			} else
-+				rc = 0;
-+		}
-+
-+		if (!rc) {
-+			cFYI(1, ("Error decoding negTokenInit header"));
-+			return 0;
-+		}
-+
-+		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-+			cFYI(1, ("Error decoding negTokenInit "));
-+			return 0;
-+		} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
-+			   || (tag != ASN1_EOC)) {
-+			cFYI(1,("cls = %d con = %d tag = %d end = %p (%d) exit 0",
-+			      cls, con, tag, end, *end));
-+			return 0;
-+		}
-+
-+		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-+			cFYI(1, ("Error decoding negTokenInit "));
-+			return 0;
-+		} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
-+			   || (tag != ASN1_SEQ)) {
-+			cFYI(1,("cls = %d con = %d tag = %d end = %p (%d) exit 1",
-+			      cls, con, tag, end, *end));
-+			return 0;
-+		}
-+
-+		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-+			cFYI(1, ("Error decoding 2nd part of negTokenInit "));
-+			return 0;
-+		} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
-+			   || (tag != ASN1_EOC)) {
-+			cFYI(1,
-+			     ("cls = %d con = %d tag = %d end = %p (%d) exit 0",
-+			      cls, con, tag, end, *end));
-+			return 0;
-+		}
-+
-+		if (asn1_header_decode
-+		    (&ctx, &sequence_end, &cls, &con, &tag) == 0) {
-+			cFYI(1, ("Error decoding 2nd part of negTokenInit "));
-+			return 0;
-+		} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
-+			   || (tag != ASN1_SEQ)) {
-+			cFYI(1,
-+			     ("cls = %d con = %d tag = %d end = %p (%d) exit 1",
-+			      cls, con, tag, end, *end));
-+			return 0;
-+		}
-+
-+		while (!asn1_eoc_decode(&ctx, sequence_end)) {
-+			rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
-+			if (!rc) {
-+				cFYI(1,
-+				     ("Error 1 decoding negTokenInit header exit 2"));
-+				return 0;
-+			}
-+			if ((tag == ASN1_OJI) && (con == ASN1_PRI)) {
-+				asn1_oid_decode(&ctx, end, &oid, &oidlen);
-+				cFYI(1,
-+				     ("OID len = %d oid = 0x%lx 0x%lx 0x%lx 0x%lx",
-+				      oidlen, *oid, *(oid + 1), *(oid + 2),
-+				      *(oid + 3)));
-+				rc = compare_oid(oid, oidlen, NTLMSSP_OID,
-+						 NTLMSSP_OID_LEN);
-+				kfree(oid);
-+				if (rc)
-+					use_ntlmssp = TRUE;
-+			} else {
-+				cFYI(1,("This should be an oid what is going on? "));
-+			}
-+		}
-+
-+		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-+			cFYI(1,
-+			     ("Error decoding last part of negTokenInit exit 3"));
-+			return 0;
-+		} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {	/* tag = 3 indicating mechListMIC */
-+			cFYI(1,
-+			     ("Exit 4 cls = %d con = %d tag = %d end = %p (%d)",
-+			      cls, con, tag, end, *end));
-+			return 0;
-+		}
-+		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-+			cFYI(1,
-+			     ("Error decoding last part of negTokenInit exit 5"));
-+			return 0;
-+		} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
-+			   || (tag != ASN1_SEQ)) {
-+			cFYI(1,
-+			     ("Exit 6 cls = %d con = %d tag = %d end = %p (%d)",
-+			      cls, con, tag, end, *end));
-+		}
-+
-+		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-+			cFYI(1,
-+			     ("Error decoding last part of negTokenInit exit 7"));
-+			return 0;
-+		} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
-+			cFYI(1,
-+			     ("Exit 8 cls = %d con = %d tag = %d end = %p (%d)",
-+			      cls, con, tag, end, *end));
-+			return 0;
-+		}
-+		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-+			cFYI(1,
-+			     ("Error decoding last part of negTokenInit exit 9"));
-+			return 0;
-+		} else if ((cls != ASN1_UNI) || (con != ASN1_PRI)
-+			   || (tag != ASN1_GENSTR)) {
-+			cFYI(1,
-+			     ("Exit 10 cls = %d con = %d tag = %d end = %p (%d)",
-+			      cls, con, tag, end, *end));
-+			return 0;
-+		}
-+		cFYI(1, ("Need to call asn1_octets_decode() function for this %s", ctx.pointer));	/* is this UTF-8 or ASCII? */
-+	}
-+
-+	/* if (use_kerberos) 
-+	   *secType = Kerberos 
-+	   else */
-+	if (use_ntlmssp) {
-+		*secType = NTLMSSP;
-+	}
-+
-+	return 1;
-+}
-diff -urN linux-2.4.29.old/fs/cifs/AUTHORS linux-2.4.29/fs/cifs/AUTHORS
---- linux-2.4.29.old/fs/cifs/AUTHORS	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/AUTHORS	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,37 @@
-+Original Author
-+===============
-+Steve French (sfrench@samba.org)
-+
-+The author wishes to express his appreciation and thanks to:
-+Andrew Tridgell (Samba team) for his early suggestions about smb/cifs VFS
-+improvements. Thanks to IBM for allowing me the time and test resources to pursue
-+this project. Jim McDonough from IBM (and the Samba Team) for his help.
-+The IBM Linux JFS team for explaining many esoteric Linux filesystem features.
-+Dave Boutcher of IBM Rochester (author of the OS/400 smb/cifs filesystem client)
-+for proving years ago that a very good smb/cifs client could be done on a Unix like 
-+operating system.  Volker Lendecke, Andrew Tridgell, Urban Widmark, John Newbigin 
-+and others for their work on the Linux smbfs module over the years. Thanks to
-+the other members of the Storage Network Industry Association CIFS Technical
-+Workgroup for their work specifying this highly complex protocol and finally
-+thanks to the Samba team for their technical advice and encouragement.
-+
-+Patch Contributors
-+------------------
-+Zwane Mwaikambo
-+Andi Kleen
-+Amrut Joshi
-+Shobhit Dayal
-+Sergey Vlasov
-+Richard Hughes
-+Yury Umanets
-+
-+Test case and Bug Report contributors
-+-------------------------------------
-+Thanks to those in the community who have submitted detailed bug reports
-+and debug of problems they have found:  Jochen Dolze, David Blaine,
-+Rene Scharfe, Martin Josefsson, Alexander Wild, Anthony Liguori,
-+Lars Muller, Urban Widmark, Massimiliano Ferrero, Howard Owen,
-+Olaf Kirch, Kieron Briggs, Nick Millington and others. 
-+
-+And thanks to the IBM LTC and Power test teams and SuSE testers for
-+finding multiple bugs during excellent stress test runs.
-diff -urN linux-2.4.29.old/fs/cifs/CHANGES linux-2.4.29/fs/cifs/CHANGES
---- linux-2.4.29.old/fs/cifs/CHANGES	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/CHANGES	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,572 @@
-+Version 1.20
-+------------
-+Make transaction counts more consistent. Merge /proc/fs/cifs/SimultaneousOps
-+info into /proc/fs/cifs/DebugData.  Fix oops in rare oops in readdir 
-+(in build_wildcard_path_from_dentry).  Fix mknod to pass type field
-+(block/char/fifo) properly.  Remove spurious mount warning log entry when
-+credentials passed as mount argument. Set major/minor device number in
-+inode for block and char devices when unix extensions enabled.
-+
-+Version 1.19
-+------------
-+Fix /proc/fs/cifs/Stats and DebugData display to handle larger
-+amounts of return data. Properly limit requests to MAX_REQ (50
-+is the usual maximum active multiplex SMB/CIFS requests per server).
-+Do not kill cifsd (and thus hurt the other SMB session) when more than one
-+session to the same server (but with different userids) exists and one
-+of the two user's smb sessions is being removed while leaving the other.
-+Do not loop reconnecting in cifsd demultiplex thread when admin
-+kills the thread without going through unmount.
-+
-+Version 1.18
-+------------
-+Do not rename hardlinked files (since that should be a noop). Flush
-+cached write behind data when reopening a file after session abend,
-+except when already in write. Grab per socket sem during reconnect 
-+to avoid oops in sendmsg if overlapping with reconnect. Do not
-+reset cached inode file size on readdir for files open for write on 
-+client.
-+
-+
-+Version 1.17
-+------------
-+Update number of blocks in file so du command is happier (in Linux a fake
-+blocksize of 512 is required for calculating number of blocks in inode).
-+Fix prepare write of partial pages to read in data from server if possible.
-+Fix race on tcpStatus field between unmount and reconnection code, causing
-+cifsd process sometimes to hang around forever. Improve out of memory
-+checks in cifs_filldir
-+
-+Version 1.16
-+------------
-+Fix incorrect file size in file handle based setattr on big endian hardware.
-+Fix oops in build_path_from_dentry when out of memory.  Add checks for invalid
-+and closing file structs in writepage/partialpagewrite.  Add statistics
-+for each mounted share (new menuconfig option). Fix endianness problem in
-+volume information displayed in /proc/fs/cifs/DebugData (only affects
-+affects big endian architectures). Prevent renames while constructing
-+path names for open, mkdir and rmdir.
-+
-+Version 1.15
-+------------
-+Change to mempools for alloc smb request buffers and multiplex structs
-+to better handle low memory problems (and potential deadlocks).
-+
-+Version 1.14
-+------------
-+Fix incomplete listings of large directories on Samba servers when Unix
-+extensions enabled.  Fix oops when smb_buffer can not be allocated. Fix
-+rename deadlock when writing out dirty pages at same time.
-+
-+Version 1.13
-+------------
-+Fix open of files in which O_CREATE can cause the mode to change in
-+some cases. Fix case in which retry of write overlaps file close.
-+Fix PPC64 build error.  Reduce excessive stack usage in smb password
-+hashing. Fix overwrite of Linux user's view of file mode to Windows servers.
-+
-+Version 1.12
-+------------
-+Fixes for large file copy, signal handling, socket retry, buffer
-+allocation and low memory situations.
-+
-+Version 1.11
-+------------
-+Better port 139 support to Windows servers (RFC1001/RFC1002 Session_Initialize)
-+also now allowing support for specifying client netbiosname.  NT4 support added.
-+
-+Version 1.10
-+------------
-+Fix reconnection (and certain failed mounts) to properly wake up the
-+blocked users thread so it does not seem hung (in some cases was blocked
-+until the cifs receive timeout expired). Fix spurious error logging
-+to kernel log when application with open network files killed. 
-+
-+Version 1.09
-+------------
-+Fix /proc/fs module unload warning message (that could be logged
-+to the kernel log). Fix intermittent failure in connectathon
-+test7 (hardlink count not immediately refreshed in case in which
-+inode metadata can be incorrectly kept cached when time near zero)
-+
-+Version 1.08
-+------------
-+Allow file_mode and dir_mode (specified at mount time) to be enforced
-+locally (the server already enforced its own ACLs too) for servers
-+that do not report the correct mode (do not support the 
-+CIFS Unix Extensions).
-+
-+Version 1.07
-+------------
-+Fix some small memory leaks in some unmount error paths. Fix major leak
-+of cache pages in readpages causing multiple read oriented stress
-+testcases (including fsx, and even large file copy) to fail over time. 
-+
-+Version 1.06
-+------------
-+Send NTCreateX with ATTR_POSIX if Linux/Unix extensions negotiated with server.
-+This allows files that differ only in case and improves performance of file
-+creation and file open to such servers.  Fix semaphore conflict which causes 
-+slow delete of open file to Samba (which unfortunately can cause an oplock
-+break to self while vfs_unlink held i_sem) which can hang for 20 seconds.
-+
-+Version 1.05
-+------------
-+fixes to cifs_readpages for fsx test case
-+
-+Version 1.04
-+------------
-+Fix caching data integrity bug when extending file size especially when no
-+oplock on file.  Fix spurious logging of valid already parsed mount options
-+that are parsed outside of the cifs vfs such as nosuid.
-+
-+
-+Version 1.03
-+------------
-+Connect to server when port number override not specified, and tcp port
-+unitialized.  Reset search to restart at correct file when kernel routine
-+filldir returns error during large directory searches (readdir). 
-+
-+Version 1.02
-+------------
-+Fix caching problem when files opened by multiple clients in which 
-+page cache could contain stale data, and write through did
-+not occur often enough while file was still open when read ahead
-+(read oplock) not allowed.  Treat "sep=" when first mount option
-+as an overrride of comma as the default separator between mount
-+options. 
-+
-+Version 1.01
-+------------
-+Allow passwords longer than 16 bytes. Allow null password string.
-+
-+Version 1.00
-+------------
-+Gracefully clean up failed mounts when attempting to mount to servers such as
-+Windows 98 that terminate tcp sessions during prototocol negotiation.  Handle
-+embedded commas in mount parsing of passwords.
-+
-+Version 0.99
-+------------
-+Invalidate local inode cached pages on oplock break and when last file
-+instance is closed so that the client does not continue using stale local
-+copy rather than later modified server copy of file.  Do not reconnect
-+when server drops the tcp session prematurely before negotiate
-+protocol response.  Fix oops in roepen_file when dentry freed.  Allow
-+the support for CIFS Unix Extensions to be disabled via proc interface.
-+
-+Version 0.98
-+------------
-+Fix hang in commit_write during reconnection of open files under heavy load.
-+Fix unload_nls oops in a mount failure path. Serialize writes to same socket
-+which also fixes any possible races when cifs signatures are enabled in SMBs
-+being sent out of signature sequence number order.    
-+
-+Version 0.97
-+------------
-+Fix byte range locking bug (endian problem) causing bad offset and
-+length.
-+
-+Version 0.96
-+------------
-+Fix oops (in send_sig) caused by CIFS unmount code trying to
-+wake up the demultiplex thread after it had exited. Do not log
-+error on harmless oplock release of closed handle.
-+
-+Version 0.95
-+------------
-+Fix unsafe global variable usage and password hash failure on gcc 3.3.1
-+Fix problem reconnecting secondary mounts to same server after session 
-+failure.  Fix invalid dentry - race in mkdir when directory gets created
-+by another client between the lookup and mkdir.
-+ 
-+Version 0.94
-+------------
-+Fix to list processing in reopen_files. Fix reconnection when server hung
-+but tcpip session still alive.  Set proper timeout on socket read.
-+
-+Version 0.93
-+------------
-+Add missing mount options including iocharset.  SMP fixes in write and open. 
-+Fix errors in reconnecting after TCP session failure.  Fix module unloading
-+of default nls codepage
-+
-+Version 0.92
-+------------
-+Active smb transactions should never go negative (fix double FreeXid). Fix
-+list processing in file routines. Check return code on kmalloc in open.
-+Fix spinlock usage for SMP.
-+
-+Version 0.91
-+------------
-+Fix oops in reopen_files when invalid dentry. drop dentry on server rename 
-+and on revalidate errors. Fix cases where pid is now tgid.  Fix return code
-+on create hard link when server does not support them. 
-+
-+Version 0.90
-+------------
-+Fix scheduling while atomic error in getting inode info on newly created file. 
-+Fix truncate of existing files opened with O_CREAT but not O_TRUNC set.
-+
-+Version 0.89
-+------------
-+Fix oops on write to dead tcp session. Remove error log write for case when file open
-+O_CREAT but not O_EXCL
-+
-+Version 0.88
-+------------
-+Fix non-POSIX behavior on rename of open file and delete of open file by taking 
-+advantage of trans2 SetFileInfo rename facility if available on target server.
-+Retry on ENOSPC and EAGAIN socket errors.
-+
-+Version 0.87
-+------------
-+Fix oops on big endian readdir.  Set blksize to be even power of two (2**blkbits) to fix
-+allocation size miscalculation. After oplock token lost do not read through
-+cache. 
-+
-+Version 0.86
-+------------
-+Fix oops on empty file readahead.  Fix for file size handling for locally cached files.
-+
-+Version 0.85
-+------------
-+Fix oops in mkdir when server fails to return inode info. Fix oops in reopen_files
-+during auto reconnection to server after server recovered from failure.
-+
-+Version 0.84
-+------------
-+Finish support for Linux 2.5 open/create changes, which removes the
-+redundant NTCreate/QPathInfo/close that was sent during file create.
-+Enable oplock by default. Enable packet signing by default (needed to 
-+access many recent Windows servers)
-+
-+Version 0.83
-+------------
-+Fix oops when mounting to long server names caused by inverted parms to kmalloc.
-+Fix MultiuserMount (/proc/fs/cifs configuration setting) so that when enabled
-+we will choose a cifs user session (smb uid) that better matches the local
-+uid if a) the mount uid does not match the current uid and b) we have another
-+session to the same server (ip address) for a different mount which
-+matches the current local uid.
-+
-+Version 0.82
-+------------
-+Add support for mknod of block or character devices.  Fix oplock
-+code (distributed caching) to properly send response to oplock
-+break from server.
-+
-+Version 0.81
-+------------
-+Finish up CIFS packet digital signing for the default
-+NTLM security case. This should help Windows 2003
-+network interoperability since it is common for
-+packet signing to be required now. Fix statfs (stat -f)
-+which recently started returning errors due to 
-+invalid value (-1 instead of 0) being set in the
-+struct kstatfs f_ffiles field.
-+
-+Version 0.80
-+-----------
-+Fix oops on stopping oplock thread when removing cifs when
-+built as module.
-+
-+Version 0.79
-+------------
-+Fix mount options for ro (readonly), uid, gid and file and directory mode. 
-+
-+Version 0.78
-+------------
-+Fix errors displayed on failed mounts to be more understandable.
-+Fixed various incorrect or misleading smb to posix error code mappings.
-+
-+Version 0.77
-+------------
-+Fix display of NTFS DFS junctions to display as symlinks.
-+They are the network equivalent.  Fix oops in 
-+cifs_partialpagewrite caused by missing spinlock protection
-+of openfile linked list.  Allow writebehind caching errors to 
-+be returned to the application at file close.
-+
-+Version 0.76
-+------------
-+Clean up options displayed in /proc/mounts by show_options to
-+be more consistent with other filesystems.
-+
-+Version 0.75
-+------------
-+Fix delete of readonly file to Windows servers.  Reflect
-+presence or absence of read only dos attribute in mode
-+bits for servers that do not support CIFS Unix extensions.
-+Fix shortened results on readdir of large directories to
-+servers supporting CIFS Unix extensions (caused by
-+incorrect resume key).
-+
-+Version 0.74
-+------------
-+Fix truncate bug (set file size) that could cause hangs e.g. running fsx
-+
-+Version 0.73
-+------------
-+unload nls if mount fails.
-+
-+Version 0.72
-+------------
-+Add resume key support to search (readdir) code to workaround
-+Windows bug.  Add /proc/fs/cifs/LookupCacheEnable which
-+allows disabling caching of attribute information for
-+lookups.
-+
-+Version 0.71
-+------------
-+Add more oplock handling (distributed caching code).  Remove
-+dead code.  Remove excessive stack space utilization from
-+symlink routines.
-+
-+Version 0.70
-+------------
-+Fix oops in get dfs referral (triggered when null path sent in to
-+mount).  Add support for overriding rsize at mount time.
-+
-+Version 0.69
-+------------
-+Fix buffer overrun in readdir which caused intermittent kernel oopses.
-+Fix writepage code to release kmap on write data.  Allow "-ip=" new 
-+mount option to be passed in on parameter distinct from the first part
-+(server name portion of) the UNC name.  Allow override of the
-+tcp port of the target server via new mount option "-port="  
-+
-+Version 0.68
-+------------
-+Fix search handle leak on rewind.  Fix setuid and gid so that they are 
-+reflected in the local inode immediately.  Cleanup of whitespace
-+to make 2.4 and 2.5 versions more consistent.
-+
-+
-+Version 0.67
-+------------
-+Fix signal sending so that captive thread (cifsd) exits on umount 
-+(which was causing the warning in kmem_cache_free of the request buffers
-+at rmmod time).  This had broken as a sideeffect of the recent global
-+kernel change to daemonize.  Fix memory leak in readdir code which
-+showed up in "ls -R" (and applications that did search rewinding).
-+
-+Version 0.66
-+------------
-+Reconnect tids and fids after session reconnection (still do not
-+reconnect byte range locks though).  Fix problem caching
-+lookup information for directory inodes, improving performance,
-+especially in deep directory trees.  Fix various build warnings.
-+
-+Version 0.65
-+------------
-+Finish fixes to commit write for caching/readahead consistency.  fsx 
-+now works to Samba servers.  Fix oops caused when readahead
-+was interrupted by a signal.
-+
-+Version 0.64
-+------------
-+Fix data corruption (in partial page after truncate) that caused fsx to
-+fail to Windows servers.  Cleaned up some extraneous error logging in
-+common error paths.  Add generic sendfile support.
-+
-+Version 0.63
-+------------
-+Fix memory leak in AllocMidQEntry.
-+Finish reconnection logic, so connection with server can be dropped
-+(or server rebooted) and the cifs client will reconnect.  
-+
-+Version 0.62
-+------------
-+Fix temporary socket leak when bad userid or password specified 
-+(or other SMBSessSetup failure).  Increase maximum buffer size to slightly
-+over 16K to allow negotiation of up to Samba and Windows server default read 
-+sizes.  Add support for readpages
-+
-+Version 0.61
-+------------
-+Fix oops when username not passed in on mount.  Extensive fixes and improvements
-+to error logging (strip redundant newlines, change debug macros to ensure newline
-+passed in and to be more consistent).  Fix writepage wrong file handle problem,
-+a readonly file handle could be incorrectly used to attempt to write out
-+file updates through the page cache to multiply open files.  This could cause
-+the iozone benchmark to fail on the fwrite test. Fix bug mounting two different
-+shares to the same Windows server when using different usernames
-+(doing this to Samba servers worked but Windows was rejecting it) - now it is
-+possible to use different userids when connecting to the same server from a
-+Linux client. Fix oops when treeDisconnect called during unmount on
-+previously freed socket.
-+
-+Version 0.60
-+------------
-+Fix oops in readpages caused by not setting address space operations in inode in 
-+rare code path. 
-+
-+Version 0.59
-+------------
-+Includes support for deleting of open files and renaming over existing files (per POSIX
-+requirement).  Add readlink support for Windows junction points (directory symlinks).
-+
-+Version 0.58
-+------------
-+Changed read and write to go through pagecache. Added additional address space operations.
-+Memory mapped operations now working.
-+
-+Version 0.57
-+------------
-+Added writepage code for additional memory mapping support.  Fixed leak in xids causing
-+the simultaneous operations counter (/proc/fs/cifs/SimultaneousOps) to increase on 
-+every stat call.  Additional formatting cleanup. 
-+
-+Version 0.56
-+------------
-+Fix bigendian bug in order of time conversion. Merge 2.5 to 2.4 version.  Formatting cleanup.   
-+
-+Version 0.55
-+------------
-+Fixes from Zwane Mwaikambo for adding missing return code checking in a few places.
-+Also included a modified version of his fix to protect global list manipulation of
-+the smb session and tree connection and mid related global variables.
-+
-+Version 0.54
-+------------
-+Fix problem with captive thread hanging around at unmount time.  Adjust to 2.5.42-pre
-+changes to superblock layout.   Remove wasteful allocation of smb buffers (now the send 
-+buffer is reused for responses).  Add more oplock handling. Additional minor cleanup.
-+
-+Version 0.53
-+------------
-+More stylistic updates to better match kernel style.  Add additional statistics
-+for filesystem which can be viewed via /proc/fs/cifs.  Add more pieces of NTLMv2
-+and CIFS Packet Signing enablement.
-+
-+Version 0.52
-+------------
-+Replace call to sleep_on with safer wait_on_event.
-+Make stylistic changes to better match kernel style recommendations.
-+Remove most typedef usage (except for the PDUs themselves).
-+
-+Version 0.51
-+------------
-+Update mount so the -unc mount option is no longer required (the ip address can be specified
-+in a UNC style device name.   Implementation of readpage/writepage started.
-+
-+Version 0.50
-+------------
-+Fix intermittent problem with incorrect smb header checking on badly 
-+fragmented tcp responses
-+
-+Version 0.49
-+------------
-+Fixes to setting of allocation size and file size.
-+
-+Version 0.48
-+------------
-+Various 2.5.38 fixes.  Now works on 2.5.38
-+
-+Version 0.47
-+------------
-+Prepare for 2.5 kernel merge.  Remove ifdefs.
-+
-+Version 0.46
-+------------
-+Socket buffer management fixes.  Fix dual free.
-+
-+Version 0.45
-+------------
-+Various big endian fixes for hardlinks and symlinks and also for dfs.
-+
-+Version 0.44
-+------------
-+Various big endian fixes for servers with Unix extensions such as Samba
-+
-+Version 0.43
-+------------
-+Various FindNext fixes for incorrect filenames on large directory searches on big endian
-+clients.  basic posix file i/o tests now work on big endian machines, not just le
-+
-+Version 0.42
-+------------
-+SessionSetup and NegotiateProtocol now work from Big Endian machines.
-+Various Big Endian fixes found during testing on the Linux on 390.  Various fixes for compatibility with older
-+versions of 2.4 kernel (now builds and works again on kernels at least as early as 2.4.7).
-+
-+Version 0.41
-+------------
-+Various minor fixes for Connectathon Posix "basic" file i/o test suite.  Directory caching fixed so hardlinked
-+files now return the correct rumber of links on fstat as they are repeatedly linked and unlinked.
-+
-+Version 0.40
-+------------
-+Implemented "Raw" (i.e. not encapsulated in SPNEGO) NTLMSSP (i.e. the Security Provider Interface used to negotiate
-+session advanced session authentication).  Raw NTLMSSP is preferred by Windows 2000 Professional and Windows XP.
-+Began implementing support for SPNEGO encapsulation of NTLMSSP based session authentication blobs
-+(which is the mechanism preferred by Windows 2000 server in the absence of Kerberos).
-+
-+Version 0.38
-+------------
-+Introduced optional mount helper utility mount.cifs and made coreq changes to cifs vfs to enable
-+it. Fixed a few bugs in the DFS code (e.g. bcc two bytes too short and incorrect uid in PDU).
-+
-+Version 0.37
-+------------
-+Rewrote much of connection and mount/unmount logic to handle bugs with
-+multiple uses to same share, multiple users to same server etc.
-+
-+Version 0.36
-+------------
-+Fixed major problem with dentry corruption (missing call to dput)
-+
-+Version 0.35
-+------------
-+Rewrite of readdir code to fix bug. Various fixes for bigendian machines.
-+Begin adding oplock support.  Multiusermount and oplockEnabled flags added to /proc/fs/cifs
-+although corresponding function not fully implemented in the vfs yet
-+
-+Version 0.34
-+------------
-+Fixed dentry caching bug, misc. cleanup 
-+
-+Version 0.33
-+------------
-+Fixed 2.5 support to handle build and configure changes as well as misc. 2.5 changes.  Now can build
-+on current 2.5 beta version (2.5.24) of the Linux kernel as well as on 2.4 Linux kernels.
-+Support for STATUS codes (newer 32 bit NT error codes) added.  DFS support begun to be added.
-+
-+Version 0.32
-+------------
-+Unix extensions (symlink, readlink, hardlink, chmod and some chgrp and chown) implemented
-+and tested against Samba 2.2.5
-+
-+
-+Version 0.31
-+------------
-+1) Fixed lockrange to be correct (it was one byte too short)
-+
-+2) Fixed GETLK (i.e. the fcntl call to test a range of bytes in a file to see if locked) to correctly 
-+show range as locked when there is a conflict with an existing lock.
-+
-+3) default file perms are now 2767 (indicating support for mandatory locks) instead of 777 for directories
-+in most cases.  Eventually will offer optional ability to query server for the correct perms.
-+
-+3) Fixed eventual trap when mounting twice to different shares on the same server when the first succeeded 
-+but the second one was invalid and failed (the second one was incorrectly disconnecting the tcp and smb
-+session) 
-+
-+4) Fixed error logging of valid mount options
-+
-+5) Removed logging of password field.
-+
-+6) Moved negotiate, treeDisconnect and uloggoffX (only tConx and SessSetup remain in connect.c) to cifssmb.c
-+and cleaned them up and made them more consistent with other cifs functions. 
-+
-+7) Server support for Unix extensions is now fully detected and FindFirst is implemented both ways 
-+(with or without Unix exentions) but FindNext and QueryPathInfo with the Unix extensions are not completed,
-+nor is the symlink support using the Unix extensions
-+
-+8) Started adding the readlink and follow_link code 
-+
-+Version 0.3 
-+-----------
-+Initial drop
-+
-diff -urN linux-2.4.29.old/fs/cifs/cifs_debug.c linux-2.4.29/fs/cifs/cifs_debug.c
---- linux-2.4.29.old/fs/cifs/cifs_debug.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifs_debug.c	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,797 @@
-+/*
-+ *   fs/cifs_debug.c
-+ *
-+ *   Copyright (C) International Business Machines  Corp., 2000,2003
-+ *
-+ *   Modified by Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This program is free software;  you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; either version 2 of the License, or 
-+ *   (at your option) any later version.
-+ * 
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program;  if not, write to the Free Software 
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/fs.h>
-+#include <linux/string.h>
-+#include <linux/ctype.h>
-+#include <linux/module.h>
-+#include <linux/proc_fs.h>
-+#include <asm/uaccess.h>
-+#include "cifspdu.h"
-+#include "cifsglob.h"
-+#include "cifsproto.h"
-+#include "cifs_debug.h"
-+
-+void
-+cifs_dump_mem(char *label, void *data, int length)
-+{
-+	int i, j;
-+	int *intptr = data;
-+	char *charptr = data;
-+	char buf[10], line[80];
-+
-+	printk(KERN_DEBUG "%s: dump of %d bytes of data at 0x%p\n\n", 
-+		label, length, data);
-+	for (i = 0; i < length; i += 16) {
-+		line[0] = 0;
-+		for (j = 0; (j < 4) && (i + j * 4 < length); j++) {
-+			sprintf(buf, " %08x", intptr[i / 4 + j]);
-+			strcat(line, buf);
-+		}
-+		buf[0] = ' ';
-+		buf[2] = 0;
-+		for (j = 0; (j < 16) && (i + j < length); j++) {
-+			buf[1] = isprint(charptr[i + j]) ? charptr[i + j] : '.';
-+			strcat(line, buf);
-+		}
-+		printk(KERN_DEBUG "%s\n", line);
-+	}
-+}
-+
-+#ifdef CONFIG_PROC_FS
-+int
-+cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
-+		     int count, int *eof, void *data)
-+{
-+	struct list_head *tmp;
-+	struct list_head *tmp1;
-+	struct mid_q_entry * mid_entry;
-+	struct cifsSesInfo *ses;
-+	struct cifsTconInfo *tcon;
-+	int i;
-+	int length = 0;
-+	char * original_buf = buf;
-+
-+	*beginBuffer = buf + offset;
-+
-+	
-+	length =
-+	    sprintf(buf,
-+		    "Display Internal CIFS Data Structures for Debugging\n"
-+		    "---------------------------------------------------\n");
-+	buf += length;
-+
-+	length = sprintf(buf, "Servers:\n");
-+	buf += length;
-+
-+	i = 0;
-+	read_lock(&GlobalSMBSeslock);
-+	list_for_each(tmp, &GlobalSMBSessionList) {
-+		i++;
-+		ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList);
-+		length =
-+		    sprintf(buf,
-+			    "\n%d) Name: %s  Domain: %s Mounts: %d ServerOS: %s  \n\tServerNOS: %s\tCapabilities: 0x%x\n\tSMB session status: %d\tTCP status: %d",
-+				i, ses->serverName, ses->serverDomain, atomic_read(&ses->inUse),
-+				ses->serverOS, ses->serverNOS, ses->capabilities,ses->status,ses->server->tcpStatus);
-+		buf += length;
-+		if(ses->server) {
-+			buf += sprintf(buf, "\n\tLocal Users To Server: %d SecMode: 0x%x Req Active: %d",
-+				atomic_read(&ses->server->socketUseCount),
-+				ses->server->secMode,
-+				atomic_read(&ses->server->inFlight));
-+			
-+			length = sprintf(buf, "\nMIDs: \n");
-+			buf += length;
-+
-+			spin_lock(&GlobalMid_Lock);
-+			list_for_each(tmp1, &ses->server->pending_mid_q) {
-+				mid_entry = list_entry(tmp1, struct
-+					mid_q_entry,
-+					qhead);
-+				if(mid_entry) {
-+					length = sprintf(buf,"State: %d com: %d pid: %d tsk: %p mid %d\n",mid_entry->midState,mid_entry->command,mid_entry->pid,mid_entry->tsk,mid_entry->mid);
-+					buf += length;
-+				}
-+			}
-+			spin_unlock(&GlobalMid_Lock); 
-+		}
-+
-+	}
-+	read_unlock(&GlobalSMBSeslock);
-+	sprintf(buf, "\n");
-+	buf++;
-+
-+	length = sprintf(buf, "\nShares:\n");
-+	buf += length;
-+
-+	i = 0;
-+	read_lock(&GlobalSMBSeslock);
-+	list_for_each(tmp, &GlobalTreeConnectionList) {
-+		i++;
-+		tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
-+		length =
-+		    sprintf(buf,
-+			    "\n%d) %s Uses: %d Type: %s Characteristics: 0x%x Attributes: 0x%x\nPathComponentMax: %d Status: %d",
-+			    i, tcon->treeName,
-+			    atomic_read(&tcon->useCount),
-+			    tcon->nativeFileSystem,
-+			    tcon->fsDevInfo.DeviceCharacteristics,
-+			    tcon->fsAttrInfo.Attributes,
-+			    tcon->fsAttrInfo.MaxPathNameComponentLength,tcon->tidStatus);
-+		buf += length;        
-+		if (tcon->fsDevInfo.DeviceType == FILE_DEVICE_DISK)
-+			length = sprintf(buf, " type: DISK ");
-+		else if (tcon->fsDevInfo.DeviceType == FILE_DEVICE_CD_ROM)
-+			length = sprintf(buf, " type: CDROM ");
-+		else
-+			length =
-+			    sprintf(buf, " type: %d ",
-+				    tcon->fsDevInfo.DeviceType);
-+		buf += length;
-+		if(tcon->tidStatus == CifsNeedReconnect) {
-+			buf += sprintf(buf, "\tDISCONNECTED ");
-+			length += 14;
-+		}
-+	}
-+	read_unlock(&GlobalSMBSeslock);
-+
-+	length = sprintf(buf, "\n");
-+	buf += length;
-+
-+	/* BB add code to dump additional info such as TCP session info now */
-+	/* Now calculate total size of returned data */
-+	length = buf - original_buf;
-+
-+	if(offset + count >= length)
-+		*eof = 1;
-+	if(length < offset) {
-+		*eof = 1;
-+		return 0;
-+	} else {
-+		length = length - offset;
-+	}
-+	if (length > count)
-+		length = count;
-+
-+	return length;
-+}
-+
-+#ifdef CONFIG_CIFS_STATS
-+int
-+cifs_stats_read(char *buf, char **beginBuffer, off_t offset,
-+		  int count, int *eof, void *data)
-+{
-+	int item_length,i,length;
-+	struct list_head *tmp;
-+	struct cifsTconInfo *tcon;
-+
-+	*beginBuffer = buf + offset;
-+
-+	length = sprintf(buf,
-+			"Resources in use\nCIFS Session: %d\n",
-+			sesInfoAllocCount.counter);
-+	buf += length;
-+	item_length = 
-+		sprintf(buf,"Share (unique mount targets): %d\n",
-+			tconInfoAllocCount.counter);
-+	length += item_length;
-+	buf += item_length;      
-+	item_length = 
-+		sprintf(buf,"SMB Request/Response Buffer: %d\n",
-+			bufAllocCount.counter);
-+	length += item_length;
-+	buf += item_length;      
-+	item_length = 
-+		sprintf(buf,"Operations (MIDs): %d\n",
-+			midCount.counter);
-+	length += item_length;
-+	buf += item_length;
-+	item_length = sprintf(buf,
-+		"\n%d session %d share reconnects\n",
-+		tcpSesReconnectCount.counter,tconInfoReconnectCount.counter);
-+	length += item_length;
-+	buf += item_length;
-+
-+	item_length = sprintf(buf,
-+		"Total vfs operations: %d maximum at one time: %d\n",
-+		GlobalCurrentXid,GlobalMaxActiveXid);
-+	length += item_length;
-+	buf += item_length;
-+
-+	i = 0;
-+	read_lock(&GlobalSMBSeslock);
-+	list_for_each(tmp, &GlobalTreeConnectionList) {
-+		i++;
-+		tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
-+		item_length = sprintf(buf,"\n%d) %s",i, tcon->treeName);
-+		buf += item_length;
-+		length += item_length;
-+		if(tcon->tidStatus == CifsNeedReconnect) {
-+			buf += sprintf(buf, "\tDISCONNECTED ");
-+			length += 14;
-+		}
-+		item_length = sprintf(buf,"\nSMBs: %d Oplock Breaks: %d",
-+			atomic_read(&tcon->num_smbs_sent),
-+			atomic_read(&tcon->num_oplock_brks));
-+		buf += item_length;
-+		length += item_length;
-+		item_length = sprintf(buf,"\nReads: %d Bytes %lld",
-+			atomic_read(&tcon->num_reads),
-+			(long long)(tcon->bytes_read));
-+		buf += item_length;
-+		length += item_length;
-+		item_length = sprintf(buf,"\nWrites: %d Bytes: %lld",
-+			atomic_read(&tcon->num_writes),
-+			(long long)(tcon->bytes_written));
-+		buf += item_length;
-+		length += item_length;
-+		item_length = sprintf(buf,
-+			"\nOpens: %d Deletes: %d\nMkdirs: %d Rmdirs: %d",
-+			atomic_read(&tcon->num_opens),
-+			atomic_read(&tcon->num_deletes),
-+			atomic_read(&tcon->num_mkdirs),
-+			atomic_read(&tcon->num_rmdirs));
-+		buf += item_length;
-+		length += item_length;
-+		item_length = sprintf(buf,
-+			"\nRenames: %d T2 Renames %d",
-+			atomic_read(&tcon->num_renames),
-+			atomic_read(&tcon->num_t2renames));
-+		buf += item_length;
-+		length += item_length;
-+	}
-+	read_unlock(&GlobalSMBSeslock);
-+
-+	buf += sprintf(buf,"\n");
-+	length++;
-+
-+	if(offset + count >= length)
-+		*eof = 1;
-+	if(length < offset) {
-+		*eof = 1;
-+		return 0;
-+	} else {
-+		length = length - offset;
-+	}
-+	if (length > count)
-+		length = count;
-+		
-+	return length;
-+}
-+#endif
-+
-+struct proc_dir_entry *proc_fs_cifs;
-+read_proc_t cifs_txanchor_read;
-+static read_proc_t cifsFYI_read;
-+static write_proc_t cifsFYI_write;
-+static read_proc_t oplockEnabled_read;
-+static write_proc_t oplockEnabled_write;
-+static read_proc_t lookupFlag_read;
-+static write_proc_t lookupFlag_write;
-+static read_proc_t traceSMB_read;
-+static write_proc_t traceSMB_write;
-+static read_proc_t multiuser_mount_read;
-+static write_proc_t multiuser_mount_write;
-+static read_proc_t extended_security_read;
-+static write_proc_t extended_security_write;
-+static read_proc_t ntlmv2_enabled_read;
-+static write_proc_t ntlmv2_enabled_write;
-+static read_proc_t packet_signing_enabled_read;
-+static write_proc_t packet_signing_enabled_write;
-+static read_proc_t quotaEnabled_read;
-+static write_proc_t quotaEnabled_write;
-+static read_proc_t linuxExtensionsEnabled_read;
-+static write_proc_t linuxExtensionsEnabled_write;
-+
-+void
-+cifs_proc_init(void)
-+{
-+	struct proc_dir_entry *pde;
-+
-+	proc_fs_cifs = proc_mkdir("cifs", proc_root_fs);
-+	if (proc_fs_cifs == NULL)
-+		return;
-+
-+	proc_fs_cifs->owner = THIS_MODULE;
-+	create_proc_read_entry("DebugData", 0, proc_fs_cifs,
-+				cifs_debug_data_read, NULL);
-+
-+#ifdef CONFIG_CIFS_STATS
-+	create_proc_read_entry("Stats", 0, proc_fs_cifs,
-+				cifs_stats_read, NULL);
-+#endif
-+	pde = create_proc_read_entry("cifsFYI", 0, proc_fs_cifs,
-+				cifsFYI_read, NULL);
-+	if (pde)
-+		pde->write_proc = cifsFYI_write;
-+
-+	pde =
-+	    create_proc_read_entry("traceSMB", 0, proc_fs_cifs,
-+				traceSMB_read, NULL);
-+	if (pde)
-+		pde->write_proc = traceSMB_write;
-+
-+	pde = create_proc_read_entry("OplockEnabled", 0, proc_fs_cifs,
-+				oplockEnabled_read, NULL);
-+	if (pde)
-+		pde->write_proc = oplockEnabled_write;
-+
-+	pde = create_proc_read_entry("QuotaEnabled", 0, proc_fs_cifs,
-+				quotaEnabled_read, NULL);
-+	if (pde)
-+		pde->write_proc = quotaEnabled_write;
-+
-+	pde = create_proc_read_entry("LinuxExtensionsEnabled", 0, proc_fs_cifs,
-+				linuxExtensionsEnabled_read, NULL);
-+	if (pde)
-+		pde->write_proc = linuxExtensionsEnabled_write;
-+
-+	pde =
-+	    create_proc_read_entry("MultiuserMount", 0, proc_fs_cifs,
-+				multiuser_mount_read, NULL);
-+	if (pde)
-+		pde->write_proc = multiuser_mount_write;
-+
-+	pde =
-+	    create_proc_read_entry("ExtendedSecurity", 0, proc_fs_cifs,
-+				extended_security_read, NULL);
-+	if (pde)
-+		pde->write_proc = extended_security_write;
-+
-+	pde =
-+	create_proc_read_entry("LookupCacheEnabled", 0, proc_fs_cifs,
-+				lookupFlag_read, NULL);
-+	if (pde)
-+		pde->write_proc = lookupFlag_write;
-+
-+	pde =
-+	    create_proc_read_entry("NTLMV2Enabled", 0, proc_fs_cifs,
-+				ntlmv2_enabled_read, NULL);
-+	if (pde)
-+		pde->write_proc = ntlmv2_enabled_write;
-+
-+	pde =
-+	    create_proc_read_entry("PacketSigningEnabled", 0, proc_fs_cifs,
-+				packet_signing_enabled_read, NULL);
-+	if (pde)
-+		pde->write_proc = packet_signing_enabled_write;
-+}
-+
-+void
-+cifs_proc_clean(void)
-+{
-+	if (proc_fs_cifs == NULL)
-+		return;
-+
-+	remove_proc_entry("DebugData", proc_fs_cifs);
-+	remove_proc_entry("cifsFYI", proc_fs_cifs);
-+	remove_proc_entry("traceSMB", proc_fs_cifs);
-+#ifdef CONFIG_CIFS_STATS
-+	remove_proc_entry("Stats", proc_fs_cifs);
-+#endif
-+	remove_proc_entry("MultiuserMount", proc_fs_cifs);
-+	remove_proc_entry("OplockEnabled", proc_fs_cifs);
-+	remove_proc_entry("NTLMV2Enabled",proc_fs_cifs);
-+	remove_proc_entry("ExtendedSecurity",proc_fs_cifs);
-+	remove_proc_entry("PacketSigningEnabled",proc_fs_cifs);
-+	remove_proc_entry("LinuxExtensionsEnabled",proc_fs_cifs);
-+	remove_proc_entry("QuotaEnabled",proc_fs_cifs);
-+	remove_proc_entry("LookupCacheEnabled",proc_fs_cifs);
-+	remove_proc_entry("cifs", proc_root_fs);
-+}
-+
-+static int
-+cifsFYI_read(char *page, char **start, off_t off, int count,
-+	     int *eof, void *data)
-+{
-+	int len;
-+
-+	len = sprintf(page, "%d\n", cifsFYI);
-+
-+	len -= off;
-+	*start = page + off;
-+
-+	if (len > count)
-+		len = count;
-+	else
-+		*eof = 1;
-+
-+	if (len < 0)
-+		len = 0;
-+
-+	return len;
-+}
-+static int
-+cifsFYI_write(struct file *file, const char *buffer,
-+	      unsigned long count, void *data)
-+{
-+	char c;
-+	int rc;
-+
-+	rc = get_user(c, buffer);
-+	if (rc)
-+		return rc;
-+	if (c == '0' || c == 'n' || c == 'N')
-+		cifsFYI = 0;
-+	else if (c == '1' || c == 'y' || c == 'Y')
-+		cifsFYI = 1;
-+
-+	return count;
-+}
-+
-+static int
-+oplockEnabled_read(char *page, char **start, off_t off,
-+		   int count, int *eof, void *data)
-+{
-+	int len;
-+
-+	len = sprintf(page, "%d\n", oplockEnabled);
-+
-+	len -= off;
-+	*start = page + off;
-+
-+	if (len > count)
-+		len = count;
-+	else
-+		*eof = 1;
-+
-+	if (len < 0)
-+		len = 0;
-+
-+	return len;
-+}
-+static int
-+oplockEnabled_write(struct file *file, const char *buffer,
-+		    unsigned long count, void *data)
-+{
-+	char c;
-+	int rc;
-+
-+	rc = get_user(c, buffer);
-+	if (rc)
-+		return rc;
-+	if (c == '0' || c == 'n' || c == 'N')
-+		oplockEnabled = 0;
-+	else if (c == '1' || c == 'y' || c == 'Y')
-+		oplockEnabled = 1;
-+
-+	return count;
-+}
-+
-+static int
-+quotaEnabled_read(char *page, char **start, off_t off,
-+                   int count, int *eof, void *data)
-+{
-+        int len;
-+
-+        len = sprintf(page, "%d\n", quotaEnabled);
-+/* could also check if quotas are enabled in kernel
-+	as a whole first */
-+        len -= off;
-+        *start = page + off;
-+
-+        if (len > count)
-+                len = count;
-+        else
-+                *eof = 1;
-+
-+        if (len < 0)
-+                len = 0;
-+
-+        return len;
-+}
-+static int
-+quotaEnabled_write(struct file *file, const char *buffer,
-+                    unsigned long count, void *data)
-+{
-+        char c;
-+        int rc;
-+
-+        rc = get_user(c, buffer);
-+        if (rc)
-+                return rc;
-+        if (c == '0' || c == 'n' || c == 'N')
-+                quotaEnabled = 0;
-+        else if (c == '1' || c == 'y' || c == 'Y')
-+                quotaEnabled = 1;
-+
-+        return count;
-+}
-+
-+static int
-+linuxExtensionsEnabled_read(char *page, char **start, off_t off,
-+                   int count, int *eof, void *data)
-+{
-+        int len;
-+
-+        len = sprintf(page, "%d\n", linuxExtEnabled);
-+/* could also check if quotas are enabled in kernel
-+	as a whole first */
-+        len -= off;
-+        *start = page + off;
-+
-+        if (len > count)
-+                len = count;
-+        else
-+                *eof = 1;
-+
-+        if (len < 0)
-+                len = 0;
-+
-+        return len;
-+}
-+static int
-+linuxExtensionsEnabled_write(struct file *file, const char *buffer,
-+                    unsigned long count, void *data)
-+{
-+        char c;
-+        int rc;
-+
-+        rc = get_user(c, buffer);
-+        if (rc)
-+                return rc;
-+        if (c == '0' || c == 'n' || c == 'N')
-+                linuxExtEnabled = 0;
-+        else if (c == '1' || c == 'y' || c == 'Y')
-+                linuxExtEnabled = 1;
-+
-+        return count;
-+}
-+
-+
-+static int
-+lookupFlag_read(char *page, char **start, off_t off,
-+		   int count, int *eof, void *data)
-+{
-+	int len;
-+
-+	len = sprintf(page, "%d\n", lookupCacheEnabled);
-+
-+	len -= off;
-+	*start = page + off;
-+
-+	if (len > count)
-+		len = count;
-+	else
-+		*eof = 1;
-+
-+	if (len < 0)
-+		len = 0;
-+
-+	return len;
-+}
-+static int
-+lookupFlag_write(struct file *file, const char *buffer,
-+		    unsigned long count, void *data)
-+{
-+	char c;
-+	int rc;
-+
-+	rc = get_user(c, buffer);
-+	if (rc)
-+		return rc;
-+	if (c == '0' || c == 'n' || c == 'N')
-+		lookupCacheEnabled = 0;
-+	else if (c == '1' || c == 'y' || c == 'Y')
-+		lookupCacheEnabled = 1;
-+
-+	return count;
-+}
-+static int
-+traceSMB_read(char *page, char **start, off_t off, int count,
-+	      int *eof, void *data)
-+{
-+	int len;
-+
-+	len = sprintf(page, "%d\n", traceSMB);
-+
-+	len -= off;
-+	*start = page + off;
-+
-+	if (len > count)
-+		len = count;
-+	else
-+		*eof = 1;
-+
-+	if (len < 0)
-+		len = 0;
-+
-+	return len;
-+}
-+static int
-+traceSMB_write(struct file *file, const char *buffer,
-+	       unsigned long count, void *data)
-+{
-+	char c;
-+	int rc;
-+
-+	rc = get_user(c, buffer);
-+	if (rc)
-+		return rc;
-+	if (c == '0' || c == 'n' || c == 'N')
-+		traceSMB = 0;
-+	else if (c == '1' || c == 'y' || c == 'Y')
-+		traceSMB = 1;
-+
-+	return count;
-+}
-+
-+static int
-+multiuser_mount_read(char *page, char **start, off_t off,
-+		     int count, int *eof, void *data)
-+{
-+	int len;
-+
-+	len = sprintf(page, "%d\n", multiuser_mount);
-+
-+	len -= off;
-+	*start = page + off;
-+
-+	if (len > count)
-+		len = count;
-+	else
-+		*eof = 1;
-+
-+	if (len < 0)
-+		len = 0;
-+
-+	return len;
-+}
-+static int
-+multiuser_mount_write(struct file *file, const char *buffer,
-+		      unsigned long count, void *data)
-+{
-+	char c;
-+	int rc;
-+
-+	rc = get_user(c, buffer);
-+	if (rc)
-+		return rc;
-+	if (c == '0' || c == 'n' || c == 'N')
-+		multiuser_mount = 0;
-+	else if (c == '1' || c == 'y' || c == 'Y')
-+		multiuser_mount = 1;
-+
-+	return count;
-+}
-+
-+static int
-+extended_security_read(char *page, char **start, off_t off,
-+		       int count, int *eof, void *data)
-+{
-+	int len;
-+
-+	len = sprintf(page, "%d\n", extended_security);
-+
-+	len -= off;
-+	*start = page + off;
-+
-+	if (len > count)
-+		len = count;
-+	else
-+		*eof = 1;
-+
-+	if (len < 0)
-+		len = 0;
-+
-+	return len;
-+}
-+static int
-+extended_security_write(struct file *file, const char *buffer,
-+			unsigned long count, void *data)
-+{
-+	char c;
-+	int rc;
-+
-+	rc = get_user(c, buffer);
-+	if (rc)
-+		return rc;
-+	if (c == '0' || c == 'n' || c == 'N')
-+		extended_security = 0;
-+	else if (c == '1' || c == 'y' || c == 'Y')
-+		extended_security = 1;
-+
-+	return count;
-+}
-+
-+static int
-+ntlmv2_enabled_read(char *page, char **start, off_t off,
-+		       int count, int *eof, void *data)
-+{
-+	int len;
-+
-+	len = sprintf(page, "%d\n", ntlmv2_support);
-+
-+	len -= off;
-+	*start = page + off;
-+
-+	if (len > count)
-+		len = count;
-+	else
-+		*eof = 1;
-+
-+	if (len < 0)
-+		len = 0;
-+
-+	return len;
-+}
-+static int
-+ntlmv2_enabled_write(struct file *file, const char *buffer,
-+			unsigned long count, void *data)
-+{
-+	char c;
-+	int rc;
-+
-+	rc = get_user(c, buffer);
-+	if (rc)
-+		return rc;
-+	if (c == '0' || c == 'n' || c == 'N')
-+		ntlmv2_support = 0;
-+	else if (c == '1' || c == 'y' || c == 'Y')
-+		ntlmv2_support = 1;
-+
-+	return count;
-+}
-+
-+static int
-+packet_signing_enabled_read(char *page, char **start, off_t off,
-+		       int count, int *eof, void *data)
-+{
-+	int len;
-+
-+	len = sprintf(page, "%d\n", sign_CIFS_PDUs);
-+
-+	len -= off;
-+	*start = page + off;
-+
-+	if (len > count)
-+		len = count;
-+	else
-+		*eof = 1;
-+
-+	if (len < 0)
-+		len = 0;
-+
-+	return len;
-+}
-+static int
-+packet_signing_enabled_write(struct file *file, const char *buffer,
-+			unsigned long count, void *data)
-+{
-+	char c;
-+	int rc;
-+
-+	rc = get_user(c, buffer);
-+	if (rc)
-+		return rc;
-+	if (c == '0' || c == 'n' || c == 'N')
-+		sign_CIFS_PDUs = 0;
-+	else if (c == '1' || c == 'y' || c == 'Y')
-+		sign_CIFS_PDUs = 1;
-+	else if (c == '2')
-+		sign_CIFS_PDUs = 2;
-+
-+	return count;
-+}
-+
-+
-+#endif
-diff -urN linux-2.4.29.old/fs/cifs/cifs_debug.h linux-2.4.29/fs/cifs/cifs_debug.h
---- linux-2.4.29.old/fs/cifs/cifs_debug.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifs_debug.h	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,66 @@
-+/*
-+ *
-+ *   Copyright (c) International Business Machines  Corp., 2000,2002
-+ *   Modified by Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This program is free software;  you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; either version 2 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program;  if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+*/
-+#define CIFS_DEBUG		/* BB temporary */
-+
-+#ifndef _H_CIFS_DEBUG
-+#define _H_CIFS_DEBUG
-+
-+void cifs_dump_mem(char *label, void *data, int length);
-+extern int traceSMB;		/* flag which enables the function below */
-+void dump_smb(struct smb_hdr *, int);
-+
-+/*
-+ *	debug ON
-+ *	--------
-+ */
-+#ifdef CIFS_DEBUG
-+
-+
-+/* information message: e.g., configuration, major event */
-+extern int cifsFYI;
-+#define cifsfyi(format,arg...) if (cifsFYI) printk(KERN_DEBUG " " __FILE__ ": " format "\n" "" , ## arg)
-+
-+#define cFYI(button,prspec) if (button) cifsfyi prspec
-+
-+#define cifswarn(format, arg...) printk(KERN_WARNING ": " format "\n" , ## arg)
-+
-+/* debug event message: */
-+extern int cifsERROR;
-+
-+#define cEVENT(format,arg...) if (cifsERROR) printk(KERN_EVENT __FILE__ ": " format "\n" , ## arg)
-+
-+/* error event message: e.g., i/o error */
-+#define cifserror(format,arg...) if (cifsERROR) printk(KERN_ERR " CIFS VFS: " format "\n" "" , ## arg)
-+
-+#define cERROR(button, prspec) if (button) cifserror prspec
-+
-+/*
-+ *	debug OFF
-+ *	---------
-+ */
-+#else		/* _CIFS_DEBUG */
-+#define cERROR(button,prspec)
-+#define cEVENT(format,arg...)
-+#define cFYI(button, prspec)
-+#define cifserror(format,arg...)
-+#endif		/* _CIFS_DEBUG */
-+
-+#endif				/* _H_CIFS_DEBUG */
-diff -urN linux-2.4.29.old/fs/cifs/cifsencrypt.c linux-2.4.29/fs/cifs/cifsencrypt.c
---- linux-2.4.29.old/fs/cifs/cifsencrypt.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifsencrypt.c	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,204 @@
-+/*
-+ *   fs/cifs/cifsencrypt.c
-+ *
-+ *   Copyright (C) International Business Machines  Corp., 2003
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/fs.h>
-+#include "cifspdu.h"
-+#include "cifsglob.h" 
-+#include "cifs_debug.h"
-+#include "md5.h"
-+#include "cifs_unicode.h"
-+
-+/* Calculate and return the CIFS signature based on the mac key and the smb pdu */
-+/* the 16 byte signature must be allocated by the caller  */
-+/* Note we only use the 1st eight bytes */
-+/* Note that the smb header signature field on input contains the  
-+	sequence number before this function is called */
-+
-+extern void mdfour(unsigned char *out, unsigned char *in, int n);
-+extern void E_md4hash(const unsigned char *passwd, unsigned char *p16);
-+	
-+static int cifs_calculate_signature(const struct smb_hdr * cifs_pdu, const char * key, char * signature)
-+{
-+	struct	MD5Context context;
-+
-+	if((cifs_pdu == NULL) || (signature == NULL))
-+		return -EINVAL;
-+
-+	MD5Init(&context);
-+	MD5Update(&context,key,CIFS_SESSION_KEY_SIZE+16);
-+	MD5Update(&context,cifs_pdu->Protocol,cifs_pdu->smb_buf_length);
-+	MD5Final(signature,&context);
-+	return 0;
-+}
-+
-+int cifs_sign_smb(struct smb_hdr * cifs_pdu, struct cifsSesInfo * ses,
-+	__u32 * pexpected_response_sequence_number)
-+{
-+	int rc = 0;
-+	char smb_signature[20];
-+
-+	/* BB remember to initialize sequence number elsewhere and initialize mac_signing key elsewhere BB */
-+	/* BB remember to add code to save expected sequence number in midQ entry BB */
-+
-+	if((cifs_pdu == NULL) || (ses == NULL))
-+		return -EINVAL;
-+
-+	if((le32_to_cpu(cifs_pdu->Flags2) & SMBFLG2_SECURITY_SIGNATURE) == 0) 
-+		return rc;
-+
-+	spin_lock(&GlobalMid_Lock);
-+	cifs_pdu->Signature.Sequence.SequenceNumber = cpu_to_le32(ses->sequence_number);
-+	cifs_pdu->Signature.Sequence.Reserved = 0;
-+	
-+	*pexpected_response_sequence_number = ses->sequence_number++;
-+	ses->sequence_number++;
-+	spin_unlock(&GlobalMid_Lock);
-+
-+	rc = cifs_calculate_signature(cifs_pdu, ses->mac_signing_key,smb_signature);
-+	if(rc)
-+		memset(cifs_pdu->Signature.SecuritySignature, 0, 8);
-+	else
-+		memcpy(cifs_pdu->Signature.SecuritySignature, smb_signature, 8);
-+
-+	return rc;
-+}
-+
-+int cifs_verify_signature(struct smb_hdr * cifs_pdu, const char * mac_key,
-+	__u32 expected_sequence_number)
-+{
-+	unsigned int rc;
-+	char server_response_sig[8];
-+	char what_we_think_sig_should_be[20];
-+
-+	if((cifs_pdu == NULL) || (mac_key == NULL))
-+		return -EINVAL;
-+
-+	if (cifs_pdu->Command == SMB_COM_NEGOTIATE)
-+		return 0;
-+
-+	if (cifs_pdu->Command == SMB_COM_LOCKING_ANDX) {
-+		struct smb_com_lock_req * pSMB = (struct smb_com_lock_req *)cifs_pdu;
-+	    if(pSMB->LockType & LOCKING_ANDX_OPLOCK_RELEASE)
-+			return 0;
-+	}
-+
-+	/* BB what if signatures are supposed to be on for session but server does not
-+		send one? BB */
-+	
-+	/* Do not need to verify session setups with signature "BSRSPYL "  */
-+	if(memcmp(cifs_pdu->Signature.SecuritySignature,"BSRSPYL ",8)==0)
-+		cFYI(1,("dummy signature received for smb command 0x%x",cifs_pdu->Command));
-+
-+	expected_sequence_number = cpu_to_le32(expected_sequence_number);
-+
-+	/* save off the origiginal signature so we can modify the smb and check
-+		its signature against what the server sent */
-+	memcpy(server_response_sig,cifs_pdu->Signature.SecuritySignature,8);
-+
-+	cifs_pdu->Signature.Sequence.SequenceNumber = expected_sequence_number;
-+	cifs_pdu->Signature.Sequence.Reserved = 0;
-+
-+	rc = cifs_calculate_signature(cifs_pdu, mac_key,
-+		what_we_think_sig_should_be);
-+
-+	if(rc)
-+		return rc;
-+
-+	
-+/*	cifs_dump_mem("what we think it should be: ",what_we_think_sig_should_be,16); */
-+
-+	if(memcmp(server_response_sig, what_we_think_sig_should_be, 8))
-+		return -EACCES;
-+	else
-+		return 0;
-+
-+}
-+
-+/* We fill in key by putting in 40 byte array which was allocated by caller */
-+int cifs_calculate_mac_key(char * key, const char * rn, const char * password)
-+{
-+	char temp_key[16];
-+	if ((key == NULL) || (rn == NULL))
-+		return -EINVAL;
-+
-+	E_md4hash(password, temp_key);
-+	mdfour(key,temp_key,16);
-+	memcpy(key+16,rn, CIFS_SESSION_KEY_SIZE);
-+	return 0;
-+}
-+
-+int CalcNTLMv2_partial_mac_key(struct cifsSesInfo * ses, struct nls_table * nls_info)
-+{
-+	char temp_hash[16];
-+	struct HMACMD5Context ctx;
-+	char * ucase_buf;
-+	wchar_t * unicode_buf;
-+	unsigned int i,user_name_len,dom_name_len;
-+
-+	if(ses)
-+		return -EINVAL;
-+
-+	E_md4hash(ses->password, temp_hash);
-+
-+	hmac_md5_init_limK_to_64(temp_hash, 16, &ctx);
-+	user_name_len = strlen(ses->userName);
-+	if(user_name_len > MAX_USERNAME_SIZE)
-+		return -EINVAL;
-+	dom_name_len = strlen(ses->domainName);
-+	if(dom_name_len > MAX_USERNAME_SIZE)
-+		return -EINVAL;
-+  
-+	ucase_buf = kmalloc((MAX_USERNAME_SIZE+1), GFP_KERNEL);
-+	unicode_buf = kmalloc((MAX_USERNAME_SIZE+1)*4, GFP_KERNEL);
-+   
-+	for(i=0;i<user_name_len;i++)
-+		ucase_buf[i] = nls_info->charset2upper[(int)ses->userName[i]];
-+	ucase_buf[i] = 0;
-+	user_name_len = cifs_strtoUCS(unicode_buf, ucase_buf, MAX_USERNAME_SIZE*2, nls_info);
-+	unicode_buf[user_name_len] = 0;
-+	user_name_len++;
-+
-+	for(i=0;i<dom_name_len;i++)
-+		ucase_buf[i] = nls_info->charset2upper[(int)ses->domainName[i]];
-+	ucase_buf[i] = 0;
-+	dom_name_len = cifs_strtoUCS(unicode_buf+user_name_len, ucase_buf, MAX_USERNAME_SIZE*2, nls_info);
-+
-+	unicode_buf[user_name_len + dom_name_len] = 0;
-+	hmac_md5_update((const unsigned char *) unicode_buf,
-+		(user_name_len+dom_name_len)*2,&ctx);
-+
-+	hmac_md5_final(ses->mac_signing_key,&ctx);
-+	kfree(ucase_buf);
-+	kfree(unicode_buf);
-+	return 0;
-+}
-+void CalcNTLMv2_response(const struct cifsSesInfo * ses,char * v2_session_response)
-+{
-+	struct HMACMD5Context context;
-+	memcpy(v2_session_response + 8, ses->server->cryptKey,8);
-+	/* gen_blob(v2_session_response + 16); */
-+	hmac_md5_init_limK_to_64(ses->mac_signing_key, 16, &context);
-+
-+	hmac_md5_update(ses->server->cryptKey,8,&context);
-+/*	hmac_md5_update(v2_session_response+16)client thing,8,&context); */ /* BB fix */
-+
-+	hmac_md5_final(v2_session_response,&context);
-+}
-diff -urN linux-2.4.29.old/fs/cifs/cifserr.c linux-2.4.29/fs/cifs/cifserr.c
---- linux-2.4.29.old/fs/cifs/cifserr.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifserr.c	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,70 @@
-+/*
-+ *   fs/cifserr.c
-+ *
-+ *   Copyright (c) International Business Machines  Corp., 2002
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/errno.h>
-+#include <linux/fs.h>
-+#include <linux/smbno.h>
-+#include "cifsfs.h"
-+
-+int map_cifs_error(int error_class, int error_code,
-+		   int status_codes_negotiated)
-+{
-+
-+
-+	if (status_codes_negotiated) {
-+		switch (error_code) {
-+		default:
-+			return EIO;
-+		}
-+	} else
-+		switch (error_class) {
-+		case SUCCESS:
-+			return 0;
-+
-+		case ERRDOS:
-+			switch (error_code) {
-+			case ERRbadfunc:
-+				return EINVAL;
-+			default:
-+				return EIO;
-+			}
-+
-+		case ERRSRV:
-+			switch (error_code) {
-+			default:
-+				return EIO;
-+			}
-+
-+		case ERRHRD:
-+			switch (error_code) {
-+			default:
-+				return EIO;
-+			}
-+		default:
-+			return EIO;
-+		}
-+	return 0;
-+}
-+
-+int map_smb_error(int error_class, int error_code)
-+{
-+	return map_cifs_error(error_class, error_code, FALSE);
-+}
-diff -urN linux-2.4.29.old/fs/cifs/cifsfs.c linux-2.4.29/fs/cifs/cifsfs.c
---- linux-2.4.29.old/fs/cifs/cifsfs.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifsfs.c	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,769 @@
-+/*
-+ *   fs/cifs/cifsfs.c
-+ *
-+ *   Copyright (C) International Business Machines  Corp., 2002,2004
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   Common Internet FileSystem (CIFS) client
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+/* Note that BB means BUGBUG (ie something to fix eventually) */
-+
-+#include <linux/module.h>
-+#include <linux/fs.h>
-+#include <linux/mount.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/version.h>
-+#include <linux/list.h>
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,15))
-+#include <linux/seq_file.h>
-+#endif
-+#include <linux/vfs.h>
-+#include "cifsfs.h"
-+#include "cifspdu.h"
-+#define DECLARE_GLOBALS_HERE
-+#include "cifsglob.h"
-+#include "cifsproto.h"
-+#include "cifs_debug.h"
-+#include "cifs_fs_sb.h"
-+#include <linux/mm.h>
-+#define CIFS_MAGIC_NUMBER 0xFF534D42	/* the first four bytes of SMB PDUs */
-+/* BB when mempool_resize is added back in, we will resize pool on new mount */
-+#define CIFS_MIN_RCV_POOL 11 /* enough for progress to five servers */
-+
-+#ifdef CONFIG_CIFS_QUOTA
-+static struct quotactl_ops cifs_quotactl_ops;
-+#endif
-+
-+extern struct file_system_type cifs_fs_type;
-+
-+int cifsFYI = 0;
-+int cifsERROR = 1;
-+int traceSMB = 0;
-+unsigned int oplockEnabled = 1;
-+unsigned int quotaEnabled = 0;
-+unsigned int linuxExtEnabled = 1;
-+unsigned int lookupCacheEnabled = 1;
-+unsigned int multiuser_mount = 0;
-+unsigned int extended_security = 0;
-+unsigned int ntlmv2_support = 0;
-+unsigned int sign_CIFS_PDUs = 1;
-+unsigned int CIFSMaximumBufferSize = CIFS_MAX_MSGSIZE;
-+struct task_struct * oplockThread = NULL;
-+
-+extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
-+			const char *);
-+extern int cifs_umount(struct super_block *, struct cifs_sb_info *);
-+void cifs_proc_init(void);
-+void cifs_proc_clean(void);
-+
-+static DECLARE_COMPLETION(cifs_oplock_exited);
-+
-+
-+struct super_block *
-+cifs_read_super(struct super_block *sb, void *data, int silent)
-+{
-+	struct inode *inode;
-+	struct cifs_sb_info *cifs_sb;
-+	int rc = 0;
-+
-+	sb->s_flags |= MS_NODIRATIME; /* and probably even noatime */
-+	cifs_sb = CIFS_SB(sb);
-+	if(cifs_sb == NULL)
-+		return 0;
-+	else
-+		memset(cifs_sb,0,sizeof(struct cifs_sb_info));
-+	
-+
-+	rc = cifs_mount(sb, cifs_sb, data, NULL);
-+
-+	if (rc) {
-+		if (!silent)
-+			cERROR(1,
-+			       ("cifs_mount failed w/return code = %d", rc));
-+		goto out_mount_failed;
-+	}
-+
-+	sb->s_magic = CIFS_MAGIC_NUMBER;
-+	sb->s_op = &cifs_super_ops;
-+/*	if(cifs_sb->tcon->ses->server->maxBuf > MAX_CIFS_HDR_SIZE + 512)
-+	    sb->s_blocksize = cifs_sb->tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE; */
-+#ifdef CONFIG_CIFS_QUOTA
-+	sb->s_qcop = &cifs_quotactl_ops;
-+#endif
-+	sb->s_blocksize = CIFS_MAX_MSGSIZE;
-+	sb->s_blocksize_bits = 14;	/* default 2**14 = CIFS_MAX_MSGSIZE */
-+	inode = iget(sb, ROOT_I);
-+
-+	if (!inode) {
-+		goto out_no_root;
-+	}
-+
-+	sb->s_root = d_alloc_root(inode);
-+
-+	if (!sb->s_root) {
-+		goto out_no_root;
-+	}
-+
-+	return sb;
-+
-+out_no_root:
-+	cERROR(1, ("cifs_read_super: get root inode failed"));
-+	if (inode)
-+		iput(inode);
-+
-+out_mount_failed:
-+	if(cifs_sb->local_nls)
-+		unload_nls(cifs_sb->local_nls);
-+	sb->s_dev = 0;
-+	return 0;
-+}
-+
-+static void
-+cifs_put_super(struct super_block *sb)
-+{
-+	int rc = 0;
-+	struct cifs_sb_info *cifs_sb;
-+
-+	cFYI(1, ("In cifs_put_super"));
-+	cifs_sb = CIFS_SB(sb);
-+	if(cifs_sb == NULL) {
-+		cFYI(1,("Empty cifs superblock info passed to unmount"));
-+		return;
-+	}
-+	rc = cifs_umount(sb, cifs_sb); 
-+	if (rc) {
-+		cERROR(1, ("cifs_umount failed with return code %d", rc));
-+	}
-+	unload_nls(cifs_sb->local_nls);
-+	return;
-+}
-+
-+static int
-+cifs_statfs(struct super_block *sb, struct statfs *buf)
-+{
-+	int xid, rc;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	buf->f_type = CIFS_MAGIC_NUMBER;
-+
-+	/* instead could get the real value via SMB_QUERY_FS_ATTRIBUTE_INFO */
-+	buf->f_namelen = PATH_MAX;	/* PATH_MAX may be too long - it would presumably
-+					   be length of total path, note that some servers may be 
-+					   able to support more than this, but best to be safe
-+					   since Win2k and others can not handle very long filenames */
-+	buf->f_files = 0;	/* undefined */
-+	buf->f_ffree = 0;	/* unlimited */
-+
-+	rc = CIFSSMBQFSInfo(xid, pTcon, buf, cifs_sb->local_nls);
-+
-+	/*     
-+	   int f_type;
-+	   __fsid_t f_fsid;
-+	   int f_namelen;  */
-+	/* BB get from info put in tcon struct at mount time with call to QFSAttrInfo */
-+	FreeXid(xid);
-+	return 0;		/* always return success? what if volume is no longer available? */
-+}
-+
-+static int cifs_permission(struct inode * inode, int mask)
-+{
-+	/* the server does permission checks, we do not need to do it here */
-+	return 0;
-+}
-+
-+kmem_cache_t *cifs_req_cachep;
-+kmem_cache_t *cifs_mid_cachep;
-+kmem_cache_t *cifs_oplock_cachep;
-+
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-+static struct inode *
-+cifs_alloc_inode(struct super_block *sb)
-+{
-+        struct cifsInodeInfo *cifs_inode;
-+        cifs_inode =
-+            (struct cifsInodeInfo *) kmem_cache_alloc(cifs_inode_cachep,
-+                                                      SLAB_KERNEL);
-+        if (!cifs_inode)
-+                return NULL;
-+        cifs_inode->cifsAttrs = 0x20;   /* default */
-+        atomic_set(&cifs_inode->inUse, 0);
-+        cifs_inode->time = 0;
-+        /* Until the file is open and we have gotten oplock
-+        info back from the server, can not assume caching of
-+        file data or metadata */
-+        cifs_inode->clientCanCacheRead = FALSE;
-+        cifs_inode->clientCanCacheAll = FALSE;
-+        INIT_LIST_HEAD(&cifs_inode->openFileList);
-+        return &cifs_inode->vfs_inode;
-+}
-+
-+static void
-+cifs_destroy_inode(struct inode *inode)
-+{
-+	kmem_cache_free(cifs_inode_cachep, CIFS_I(inode));
-+}
-+#endif
-+
-+/*
-+ * cifs_show_options() is for displaying mount options in /proc/mounts.
-+ * Not all settable options are displayed but most of the important
-+ * ones are.
-+ */
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,15))
-+static int
-+cifs_show_options(struct seq_file *s, struct vfsmount *m)
-+{
-+	struct cifs_sb_info *cifs_sb;
-+
-+	cifs_sb = CIFS_SB(m->mnt_sb);
-+
-+	if (cifs_sb) {
-+		if (cifs_sb->tcon) {
-+			seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName);
-+			if ((cifs_sb->tcon->ses) && (cifs_sb->tcon->ses->userName))
-+				seq_printf(s, ",username=%s",
-+					   cifs_sb->tcon->ses->userName);
-+			if(cifs_sb->tcon->ses->domainName)
-+				seq_printf(s, ",domain=%s",
-+					cifs_sb->tcon->ses->domainName);
-+		}
-+		seq_printf(s, ",rsize=%d",cifs_sb->rsize);
-+		seq_printf(s, ",wsize=%d",cifs_sb->wsize);
-+	}
-+	return 0;
-+}
-+#endif
-+
-+#ifdef CONFIG_CIFS_QUOTA
-+int cifs_xquota_set(struct super_block * sb, int quota_type, qid_t qid,
-+		struct fs_disk_quota * pdquota)
-+{
-+	int xid;
-+	int rc = 0;
-+	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
-+	struct cifsTconInfo *pTcon;
-+	
-+	if(cifs_sb)
-+		pTcon = cifs_sb->tcon;
-+	else
-+		return -EIO;
-+
-+
-+	xid = GetXid();
-+	if(pTcon) {
-+		cFYI(1,("set type: 0x%x id: %d",quota_type,qid));		
-+	} else {
-+		return -EIO;
-+	}
-+
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int cifs_xquota_get(struct super_block * sb, int quota_type, qid_t qid,
-+                struct fs_disk_quota * pdquota)
-+{
-+	int xid;
-+	int rc = 0;
-+	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
-+	struct cifsTconInfo *pTcon;
-+
-+	if(cifs_sb)
-+		pTcon = cifs_sb->tcon;
-+	else
-+		return -EIO;
-+
-+	xid = GetXid();
-+	if(pTcon) {
-+                cFYI(1,("set type: 0x%x id: %d",quota_type,qid));
-+	} else {
-+		rc = -EIO;
-+	}
-+
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int cifs_xstate_set(struct super_block * sb, unsigned int flags, int operation)
-+{
-+	int xid; 
-+	int rc = 0;
-+	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
-+	struct cifsTconInfo *pTcon;
-+
-+	if(cifs_sb)
-+		pTcon = cifs_sb->tcon;
-+	else
-+		return -EIO;
-+
-+	xid = GetXid();
-+	if(pTcon) {
-+                cFYI(1,("flags: 0x%x operation: 0x%x",flags,operation));
-+	} else {
-+		rc = -EIO;
-+	}
-+
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int cifs_xstate_get(struct super_block * sb, struct fs_quota_stat *qstats)
-+{
-+	int xid;
-+	int rc = 0;
-+	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
-+	struct cifsTconInfo *pTcon;
-+
-+	if(cifs_sb) {
-+		pTcon = cifs_sb->tcon;
-+	} else {
-+		return -EIO;
-+	}
-+	xid = GetXid();
-+	if(pTcon) {
-+		cFYI(1,("pqstats %p",qstats));		
-+	} else {
-+		rc = -EIO;
-+	}
-+
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+static struct quotactl_ops cifs_quotactl_ops = {
-+	.set_xquota	= cifs_xquota_set,
-+	.get_xquota	= cifs_xquota_set,
-+	.set_xstate	= cifs_xstate_set,
-+	.get_xstate	= cifs_xstate_get,
-+};
-+#endif
-+
-+static int cifs_remount(struct super_block *sb, int *flags, char *data)
-+{
-+	*flags |= MS_NODIRATIME;
-+	return 0;
-+}
-+
-+struct super_operations cifs_super_ops = {
-+	.read_inode = cifs_read_inode,
-+	.put_super = cifs_put_super,
-+	.statfs = cifs_statfs,
-+/*	.alloc_inode = cifs_alloc_inode,
-+	.destroy_inode = cifs_destroy_inode, */
-+/*	.drop_inode	    = generic_delete_inode, 
-+	.delete_inode	= cifs_delete_inode,  *//* Do not need the above two functions     
-+   unless later we add lazy close of inodes or unless the kernel forgets to call
-+   us with the same number of releases (closes) as opens */
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,15))
-+	.show_options = cifs_show_options,
-+#endif
-+/*    .umount_begin   = cifs_umount_begin, *//* consider adding in the future */
-+};
-+
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-+static struct super_block *
-+cifs_get_sb(struct file_system_type *fs_type,
-+	    int flags, const char *dev_name, void *data)
-+{
-+	int rc;
-+	struct super_block *sb = sget(fs_type, NULL, set_anon_super, NULL);
-+
-+	cFYI(1, ("Devname: %s flags: %d ", dev_name, flags));
-+
-+	if (IS_ERR(sb))
-+		return sb;
-+
-+	sb->s_flags = flags;
-+
-+	rc = cifs_read_super(sb, data, dev_name, flags & MS_VERBOSE ? 1 : 0);
-+	if (rc) {
-+		up_write(&sb->s_umount);
-+		deactivate_super(sb);
-+		return ERR_PTR(rc);
-+	}
-+	sb->s_flags |= MS_ACTIVE;
-+	return sb;
-+}
-+#endif
-+
-+static ssize_t
-+cifs_read_wrapper(struct file * file, char *read_data, size_t read_size,
-+          loff_t * poffset)
-+{
-+	if(file == NULL)
-+		return -EIO;
-+	else if(file->f_dentry == NULL)
-+		return -EIO;
-+	else if(file->f_dentry->d_inode == NULL)
-+		return -EIO;
-+
-+	if(CIFS_I(file->f_dentry->d_inode)->clientCanCacheRead) {
-+		return generic_file_read(file,read_data,read_size,poffset);
-+	} else {
-+		/* BB do we need to lock inode from here until after invalidate? */
-+/*		if(file->f_dentry->d_inode->i_mapping) {
-+			filemap_fdatawrite(file->f_dentry->d_inode->i_mapping);
-+			filemap_fdatawait(file->f_dentry->d_inode->i_mapping);
-+		}*/
-+/*		cifs_revalidate(file->f_dentry);*/ /* BB fixme */
-+
-+		/* BB we should make timer configurable - perhaps 
-+		   by simply calling cifs_revalidate here */
-+		/* invalidate_remote_inode(file->f_dentry->d_inode);*/
-+		return generic_file_read(file,read_data,read_size,poffset);
-+	}
-+}
-+
-+static ssize_t
-+cifs_write_wrapper(struct file * file, const char *write_data,
-+           size_t write_size, loff_t * poffset) 
-+{
-+	ssize_t written;
-+
-+	if(file == NULL)
-+		return -EIO;
-+	else if(file->f_dentry == NULL)
-+		return -EIO;
-+	else if(file->f_dentry->d_inode == NULL)
-+		return -EIO;
-+
-+	/* check whether we can cache writes locally */
-+	written = generic_file_write(file,write_data,write_size,poffset);
-+	if(!CIFS_I(file->f_dentry->d_inode)->clientCanCacheAll)  {
-+		if(file->f_dentry->d_inode->i_mapping) {
-+			filemap_fdatasync(file->f_dentry->d_inode->i_mapping);
-+		}
-+	}
-+	return written;
-+}
-+
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-+static struct file_system_type cifs_fs_type = {
-+	.owner = THIS_MODULE,
-+	.name = "cifs",
-+	.get_sb = cifs_get_sb,
-+	.kill_sb = kill_anon_super,
-+	/*  .fs_flags */
-+};
-+#endif
-+
-+static DECLARE_FSTYPE(cifs_fs_type, "cifs", cifs_read_super,0);
-+
-+
-+struct inode_operations cifs_dir_inode_ops = {
-+	.create = cifs_create,
-+	.lookup = cifs_lookup,
-+	.unlink = cifs_unlink,
-+	.link = cifs_hardlink,
-+	.mkdir = cifs_mkdir,
-+	.rmdir = cifs_rmdir,
-+	.rename = cifs_rename,
-+	.permission = cifs_permission,
-+	.revalidate = cifs_revalidate,  
-+	.setattr = cifs_setattr,
-+	.symlink = cifs_symlink,
-+	.mknod   = cifs_mknod,
-+};
-+
-+struct inode_operations cifs_file_inode_ops = {
-+	.revalidate = cifs_revalidate,
-+	.setattr = cifs_setattr,
-+/*	.getattr = cifs_getattr,*/
-+	.rename = cifs_rename,
-+	.permission = cifs_permission,
-+#ifdef CONFIG_CIFS_XATTR
-+	.setxattr = cifs_setxattr,
-+	.getxattr = cifs_getxattr,
-+	.listxattr = cifs_listxattr,
-+	.removexattr = cifs_removexattr,
-+#endif 
-+};
-+
-+struct inode_operations cifs_symlink_inode_ops = {
-+	.readlink = cifs_readlink,
-+	.follow_link = cifs_follow_link,
-+	.permission = cifs_permission,
-+	/* BB add the following two eventually */
-+	/* revalidate: cifs_revalidate,
-+	   setattr:    cifs_notify_change, *//* BB do we need notify change */
-+#ifdef CONFIG_CIFS_XATTR
-+	.setxattr = cifs_setxattr,
-+	.getxattr = cifs_getxattr,
-+	.listxattr = cifs_listxattr,
-+	.removexattr = cifs_removexattr,
-+#endif 
-+};
-+
-+struct file_operations cifs_file_ops = {
-+	.read = cifs_read_wrapper,
-+	.write = cifs_write_wrapper, 
-+	.open = cifs_open,
-+	.release = cifs_close,
-+	.lock = cifs_lock,
-+	.fsync = cifs_fsync,
-+	.flush = cifs_flush,
-+	.mmap  = cifs_file_mmap,
-+/*	.sendfile = generic_file_sendfile,*/
-+#ifdef CONFIG_CIFS_FCNTL
-+	.fcntl = cifs_fcntl,
-+#endif
-+};
-+
-+struct file_operations cifs_dir_ops = {
-+	.readdir = cifs_readdir,
-+	.release = cifs_closedir,
-+	.read    = generic_read_dir,
-+#ifdef CONFIG_CIFS_FCNTL
-+	.fcntl   = cifs_fcntl,
-+#endif
-+};
-+/*
-+static void
-+cifs_init_once(void *inode, kmem_cache_t * cachep, unsigned long flags)
-+{
-+	struct cifsInodeInfo *cifsi = (struct cifsInodeInfo *) inode;
-+
-+	if ((flags & (SLAB_CTOR_VERIFY | SLAB_CTOR_CONSTRUCTOR)) ==
-+	    SLAB_CTOR_CONSTRUCTOR) {
-+		inode_init_once(&cifsi->vfs_inode);
-+		INIT_LIST_HEAD(&cifsi->lockList);
-+	}
-+}
-+
-+static int
-+cifs_init_inodecache(void)
-+{
-+	cifs_inode_cachep = kmem_cache_create("cifs_inode_cache",
-+					      sizeof (struct cifsInodeInfo),
-+					      0, SLAB_HWCACHE_ALIGN,
-+					      cifs_init_once, NULL);
-+	if (cifs_inode_cachep == NULL)
-+		return -ENOMEM;
-+	
-+
-+	return 0;
-+}
-+
-+static void
-+cifs_destroy_inodecache(void)
-+{
-+	if (kmem_cache_destroy(cifs_inode_cachep))
-+		printk(KERN_WARNING "cifs_inode_cache: error freeing\n");
-+} */
-+
-+static int
-+cifs_init_request_bufs(void)
-+{
-+	cifs_req_cachep = kmem_cache_create("cifs_request",
-+					    CIFS_MAX_MSGSIZE +
-+					    MAX_CIFS_HDR_SIZE, 0,
-+					    SLAB_HWCACHE_ALIGN, NULL, NULL);
-+	if (cifs_req_cachep == NULL)
-+		return -ENOMEM;
-+
-+	return 0;
-+}
-+
-+static void
-+cifs_destroy_request_bufs(void)
-+{
-+	if (kmem_cache_destroy(cifs_req_cachep))
-+		printk(KERN_WARNING
-+		       "cifs_destroy_request_cache: error not all structures were freed\n");
-+}
-+
-+static int
-+cifs_init_mids(void)
-+{
-+	cifs_mid_cachep = kmem_cache_create("cifs_mpx_ids",
-+				sizeof (struct mid_q_entry), 0,
-+				SLAB_HWCACHE_ALIGN, NULL, NULL);
-+	if (cifs_mid_cachep == NULL)
-+		return -ENOMEM;
-+	cifs_oplock_cachep = kmem_cache_create("cifs_oplock_struct",
-+				sizeof (struct oplock_q_entry), 0,
-+				SLAB_HWCACHE_ALIGN, NULL, NULL);
-+	if (cifs_oplock_cachep == NULL) {
-+		kmem_cache_destroy(cifs_mid_cachep);
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
-+
-+static void
-+cifs_destroy_mids(void)
-+{
-+	if (kmem_cache_destroy(cifs_mid_cachep))
-+		printk(KERN_WARNING
-+		       "cifs_destroy_mids: error not all structures were freed\n");
-+	if (kmem_cache_destroy(cifs_oplock_cachep))
-+		printk(KERN_WARNING
-+		       "error not all oplock structures were freed\n");
-+}
-+
-+static int cifs_oplock_thread(void * dummyarg)
-+{
-+	struct oplock_q_entry * oplock_item;
-+	struct cifsTconInfo *pTcon;
-+	struct inode * inode;
-+	__u16  netfid;
-+	int rc = 0;
-+
-+	daemonize();
-+	sprintf(current->comm,"cifsoplockd");
-+
-+	oplockThread = current;
-+	do {
-+		set_current_state(TASK_INTERRUPTIBLE);
-+		
-+		schedule_timeout(1*HZ);  
-+		spin_lock(&GlobalMid_Lock);
-+		if(list_empty(&GlobalOplock_Q)) {
-+			spin_unlock(&GlobalMid_Lock);
-+			set_current_state(TASK_INTERRUPTIBLE);
-+			schedule_timeout(39*HZ);
-+		} else {
-+			oplock_item = list_entry(GlobalOplock_Q.next, 
-+				struct oplock_q_entry, qhead);
-+			if(oplock_item) {
-+				cFYI(1,("found oplock item to write out")); 
-+				pTcon = oplock_item->tcon;
-+				inode = oplock_item->pinode;
-+				netfid = oplock_item->netfid;
-+				spin_unlock(&GlobalMid_Lock);
-+				DeleteOplockQEntry(oplock_item);
-+				/* can not grab inode sem here since it would
-+				deadlock when oplock received on delete 
-+				since vfs_unlink holds the i_sem across
-+				the call */
-+				/* down(&inode->i_sem);*/
-+				if (S_ISREG(inode->i_mode)) {
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,17))
-+					rc = filemap_fdatasync(inode->i_mapping);
-+					if(rc)
-+						CIFS_I(inode)->write_behind_rc = rc;
-+#else 
-+					filemap_fdatasync(inode->i_mapping);
-+#endif
-+					if(CIFS_I(inode)->clientCanCacheRead == 0) 
-+						invalidate_inode_pages(inode);
-+				} else
-+					rc = 0;
-+				/* releasing a stale oplock after recent reconnection 
-+				of smb session using a now incorrect file 
-+				handle is not a data integrity issue but do  
-+				not bother sending an oplock release if session 
-+				to server still is disconnected since oplock 
-+				already released by the server in that case */
-+				if(pTcon->tidStatus != CifsNeedReconnect) {
-+					rc = CIFSSMBLock(0, pTcon, 
-+						netfid,
-+						0 /* len */ , 0 /* offset */, 0, 
-+						0, LOCKING_ANDX_OPLOCK_RELEASE,
-+						0 /* wait flag */);
-+					cFYI(1,("Oplock release rc = %d ",rc));
-+				}
-+			} else
-+				spin_unlock(&GlobalMid_Lock);
-+		}
-+	} while(!signal_pending(current));
-+	complete_and_exit (&cifs_oplock_exited, 0);
-+}
-+
-+static int __init
-+init_cifs(void)
-+{
-+	int rc = 0;
-+#if CONFIG_PROC_FS
-+	cifs_proc_init();
-+#endif
-+	INIT_LIST_HEAD(&GlobalServerList);	/* BB not implemented yet */
-+	INIT_LIST_HEAD(&GlobalSMBSessionList);
-+	INIT_LIST_HEAD(&GlobalTreeConnectionList);
-+	INIT_LIST_HEAD(&GlobalOplock_Q);
-+/*
-+ *  Initialize Global counters
-+ */
-+	atomic_set(&sesInfoAllocCount, 0);
-+	atomic_set(&tconInfoAllocCount, 0);
-+	atomic_set(&tcpSesReconnectCount, 0);
-+	atomic_set(&tconInfoReconnectCount, 0);
-+
-+	atomic_set(&bufAllocCount, 0);
-+	atomic_set(&midCount, 0);
-+	GlobalCurrentXid = 0;
-+	GlobalTotalActiveXid = 0;
-+	GlobalMaxActiveXid = 0;
-+	GlobalSMBSeslock = RW_LOCK_UNLOCKED;
-+	GlobalMid_Lock = SPIN_LOCK_UNLOCKED;
-+
-+/*	rc = cifs_init_inodecache();*/
-+	if (!rc) {
-+		rc = cifs_init_mids();
-+		if (!rc) {
-+			rc = cifs_init_request_bufs();
-+			if (!rc) {
-+				rc = register_filesystem(&cifs_fs_type);
-+				if (!rc) {                
-+					kernel_thread(cifs_oplock_thread, NULL, 
-+						CLONE_FS | CLONE_FILES | CLONE_VM);
-+					return rc; /* Success */
-+				} else
-+					cifs_destroy_request_bufs();
-+			}
-+			cifs_destroy_mids();
-+		}
-+/*		cifs_destroy_inodecache(); */
-+	}
-+#if CONFIG_PROC_FS
-+	cifs_proc_clean();
-+#endif
-+	return rc;
-+}
-+
-+static void __exit
-+exit_cifs(void)
-+{
-+	cFYI(0, ("In unregister ie exit_cifs"));
-+#if CONFIG_PROC_FS
-+	cifs_proc_clean();
-+#endif
-+    	unregister_filesystem(&cifs_fs_type);
-+/*	cifs_destroy_inodecache();*/
-+	cifs_destroy_mids();
-+	cifs_destroy_request_bufs();
-+	if(oplockThread) {
-+		send_sig(SIGTERM, oplockThread, 1);
-+		wait_for_completion(&cifs_oplock_exited);
-+	}
-+}
-+
-+MODULE_AUTHOR("Steve French <sfrench@us.ibm.com>");
-+MODULE_LICENSE("GPL");		/* combination of LGPL + GPL source behaves as GPL */
-+MODULE_DESCRIPTION
-+    ("VFS to access servers complying with the SNIA CIFS Specification e.g. Samba and Windows");
-+module_init(init_cifs)
-+module_exit(exit_cifs)
-diff -urN linux-2.4.29.old/fs/cifs/cifsfs.h linux-2.4.29/fs/cifs/cifsfs.h
---- linux-2.4.29.old/fs/cifs/cifsfs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifsfs.h	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,97 @@
-+/*
-+ *   fs/cifs/cifsfs.h
-+ *
-+ *   Copyright (c) International Business Machines  Corp., 2002
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 
-+ */
-+
-+#ifndef _CIFSFS_H
-+#define _CIFSFS_H
-+
-+#define ROOT_I 2
-+
-+#ifndef FALSE
-+#define FALSE 0
-+#endif
-+
-+#ifndef TRUE
-+#define TRUE 1
-+#endif
-+
-+extern int map_cifs_error(int error_class, int error_code,
-+			  int status_codes_negotiated);
-+
-+extern struct address_space_operations cifs_addr_ops;
-+
-+/* Functions related to super block operations */
-+extern struct super_operations cifs_super_ops;
-+extern void cifs_put_inode(struct inode *);
-+extern void cifs_read_inode(struct inode *);
-+extern void cifs_delete_inode(struct inode *);
-+/* extern void cifs_write_inode(struct inode *); *//* BB not needed yet */
-+
-+/* Functions related to inodes */
-+extern struct inode_operations cifs_dir_inode_ops;
-+extern int cifs_create(struct inode *, struct dentry *, int);
-+extern struct dentry *cifs_lookup(struct inode *, struct dentry *);
-+extern int cifs_unlink(struct inode *, struct dentry *);
-+extern int cifs_hardlink(struct dentry *, struct inode *, struct dentry *);
-+extern int cifs_mknod(struct inode *, struct dentry *, int, int);
-+extern int cifs_mkdir(struct inode *, struct dentry *, int);
-+extern int cifs_rmdir(struct inode *, struct dentry *);
-+extern int cifs_rename(struct inode *, struct dentry *, struct inode *,
-+		       struct dentry *);
-+extern int cifs_revalidate(struct dentry *);
-+extern int cifs_setattr(struct dentry *, struct iattr *);
-+
-+extern struct inode_operations cifs_file_inode_ops;
-+extern void cifs_truncate_file(struct inode *);
-+extern struct inode_operations cifs_symlink_inode_ops;
-+
-+/* Functions related to files and directories */
-+extern struct file_operations cifs_file_ops;
-+extern int cifs_open(struct inode *inode, struct file *file);
-+extern int cifs_close(struct inode *inode, struct file *file);
-+extern int cifs_closedir(struct inode *inode, struct file *file);
-+extern ssize_t cifs_read(struct file *file, char *read_data,
-+			 size_t read_size, loff_t * poffset);
-+extern ssize_t cifs_write(struct file *file, const char *write_data,
-+			  size_t write_size, loff_t * poffset);
-+extern int cifs_lock(struct file *, int, struct file_lock *);
-+extern int cifs_fsync(struct file *, struct dentry *, int);
-+extern int cifs_flush(struct file *);
-+extern int cifs_file_mmap(struct file * , struct vm_area_struct *);
-+extern struct file_operations cifs_dir_ops;
-+extern int cifs_dir_open(struct inode *inode, struct file *file);
-+extern int cifs_readdir(struct file *file, void *direntry, filldir_t filldir);
-+extern long cifs_fcntl(int, unsigned int, unsigned long, struct file *);
-+
-+/* Functions related to dir entries */
-+extern struct dentry_operations cifs_dentry_ops;
-+
-+/* Functions related to symlinks */
-+extern int cifs_follow_link(struct dentry *direntry, struct nameidata *nd);
-+extern int cifs_readlink(struct dentry *direntry, char *buffer, int buflen);
-+extern int cifs_symlink(struct inode *inode, struct dentry *direntry,
-+			const char *symname);
-+extern int	cifs_removexattr(struct dentry *, const char *);
-+extern int 	cifs_setxattr(struct dentry *, const char *, const void *,
-+			 size_t, int);
-+extern ssize_t	cifs_getxattr(struct dentry *, const char *, void *, size_t);
-+extern ssize_t	cifs_listxattr(struct dentry *, char *, size_t);
-+#define CIFS_VERSION   "1.20"
-+#endif				/* _CIFSFS_H */
-diff -urN linux-2.4.29.old/fs/cifs/cifs_fs_sb.h linux-2.4.29/fs/cifs/cifs_fs_sb.h
---- linux-2.4.29.old/fs/cifs/cifs_fs_sb.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifs_fs_sb.h	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,32 @@
-+/*
-+ *   fs/cifs/cifs_fs_sb.h
-+ *
-+ *   Copyright (c) International Business Machines  Corp., 2002
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ */
-+#ifndef _CIFS_FS_SB_H
-+#define _CIFS_FS_SB_H
-+
-+struct cifs_sb_info {
-+	struct cifsTconInfo *tcon;	/* primary mount */
-+	struct list_head nested_tcon_q;
-+	struct nls_table *local_nls;
-+	unsigned int rsize;
-+	unsigned int wsize;
-+	uid_t	mnt_uid;
-+	gid_t	mnt_gid;
-+	mode_t	mnt_file_mode;
-+	mode_t	mnt_dir_mode;
-+};
-+#endif				/* _CIFS_FS_SB_H */
-diff -urN linux-2.4.29.old/fs/cifs/cifsglob.h linux-2.4.29/fs/cifs/cifsglob.h
---- linux-2.4.29.old/fs/cifs/cifsglob.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifsglob.h	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,413 @@
-+/*
-+ *   fs/cifs/cifsglob.h
-+ *
-+ *   Copyright (C) International Business Machines  Corp., 2002,2003
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ * 
-+ */
-+#include <linux/in.h>
-+#include <linux/in6.h>
-+#include "cifs_fs_sb.h"
-+/*
-+ * The sizes of various internal tables and strings
-+ */
-+#define MAX_UID_INFO 16
-+#define MAX_SES_INFO 2
-+#define MAX_TCON_INFO 4
-+
-+#define MAX_TREE_SIZE 2 + MAX_SERVER_SIZE + 1 + MAX_SHARE_SIZE + 1
-+#define MAX_SERVER_SIZE 15
-+#define MAX_SHARE_SIZE  64	/* used to be 20 - this should still be enough */
-+#define MAX_USERNAME_SIZE 32	/* 32 is to allow for 15 char names + null
-+				   termination then *2 for unicode versions */
-+#define MAX_PASSWORD_SIZE 16
-+
-+/*
-+ * MAX_REQ is the maximum number of requests that WE will send
-+ * on one socket concurently. It also matches the most common
-+ * value of max multiplex returned by servers.  We may 
-+ * eventually want to use the negotiated value (in case
-+ * future servers can handle more) when we are more confident that
-+ * we will not have problems oveloading the socket with pending
-+ * write data.
-+ */
-+#define CIFS_MAX_REQ 50 
-+
-+#define SERVER_NAME_LENGTH 15
-+#define SERVER_NAME_LEN_WITH_NULL     (SERVER_NAME_LENGTH + 1)
-+
-+/* used to define string lengths for reversing unicode strings */
-+/*         (256+1)*2 = 514                                     */
-+/*           (max path length + 1 for null) * 2 for unicode    */
-+#define MAX_NAME 514
-+
-+#include "cifspdu.h"
-+
-+#ifndef FALSE
-+#define FALSE 0
-+#endif
-+
-+#ifndef TRUE
-+#define TRUE 1
-+#endif
-+
-+#ifndef XATTR_DOS_ATTRIB
-+#define XATTR_DOS_ATTRIB "user.DOSATTRIB"
-+#endif
-+
-+/*
-+ * This information is kept on every Server we know about.
-+ *
-+ * Some things to note:
-+ *
-+ */
-+#define SERVER_NAME_LEN_WITH_NULL	(SERVER_NAME_LENGTH + 1)
-+
-+/*
-+ * CIFS vfs client Status information (based on what we know.)
-+ */
-+
-+ /* associated with each tcp and smb session */
-+enum statusEnum {
-+	CifsNew = 0,
-+	CifsGood,
-+	CifsExiting,
-+	CifsNeedReconnect
-+};
-+
-+enum securityEnum {
-+	NTLM = 0,		/* Legacy NTLM012 auth with NTLM hash */
-+	NTLMv2,			/* Legacy NTLM auth with NTLMv2 hash */
-+	RawNTLMSSP,		/* NTLMSSP without SPNEGO */
-+	NTLMSSP,		/* NTLMSSP via SPNEGO */
-+	Kerberos		/* Kerberos via SPNEGO */
-+};
-+
-+enum protocolEnum {
-+	IPV4 = 0,
-+	IPV6,
-+	SCTP
-+	/* Netbios frames protocol not supported at this time */
-+};
-+
-+/*
-+ *****************************************************************
-+ * Except the CIFS PDUs themselves all the
-+ * globally interesting structs should go here
-+ *****************************************************************
-+ */
-+
-+struct TCP_Server_Info {
-+	char server_Name[SERVER_NAME_LEN_WITH_NULL];	/* 15 chars + X'20'in 16th */
-+	char unicode_server_Name[SERVER_NAME_LEN_WITH_NULL * 2];	/* Unicode version of server_Name */
-+	struct socket *ssocket;
-+	union {
-+		struct sockaddr_in sockAddr;
-+		struct sockaddr_in6 sockAddr6;
-+	} addr;
-+	wait_queue_head_t response_q; 
-+	wait_queue_head_t request_q; /* if more than maxmpx to srvr must block*/
-+	struct list_head pending_mid_q;
-+	void *Server_NlsInfo;	/* BB - placeholder for future NLS info  */
-+	unsigned short server_codepage;	/* codepage for the server    */
-+	unsigned long ip_address;	/* IP addr for the server if known     */
-+	enum protocolEnum protocolType;	
-+	char versionMajor;
-+	char versionMinor;
-+	int svlocal:1;		/* local server or remote */
-+	atomic_t socketUseCount; /* number of open cifs sessions on socket */
-+	atomic_t inFlight;  /* number of requests on the wire to server */
-+	enum statusEnum tcpStatus; /* what we think the status is */
-+	struct semaphore tcpSem;
-+	struct task_struct *tsk;
-+	char server_GUID[16];
-+	char secMode;
-+	enum securityEnum secType;
-+	unsigned int maxReq;	/* Clients should submit no more */
-+	/* than maxReq distinct unanswered SMBs to the server when using  */
-+	/* multiplexed reads or writes */
-+	unsigned int maxBuf;	/* maxBuf specifies the maximum */
-+	/* message size the server can send or receive for non-raw SMBs */
-+	unsigned int maxRw;	/* maxRw specifies the maximum */
-+	/* message size the server can send or receive for */
-+	/* SMB_COM_WRITE_RAW or SMB_COM_READ_RAW. */
-+	char sessid[4];		/* unique token id for this session */
-+	/* (returned on Negotiate */
-+	int capabilities; /* allow selective disabling of caps by smb sess */
-+	__u16 timeZone;
-+	char cryptKey[CIFS_CRYPTO_KEY_SIZE];
-+	char workstation_RFC1001_name[16]; /* 16th byte is always zero */
-+};
-+
-+/*
-+ * The following is our shortcut to user information.  We surface the uid,
-+ * and name. We always get the password on the fly in case it
-+ * has changed. We also hang a list of sessions owned by this user off here. 
-+ */
-+struct cifsUidInfo {
-+	struct list_head userList;
-+	struct list_head sessionList; /* SMB sessions for this user */
-+	uid_t linux_uid;
-+	char user[MAX_USERNAME_SIZE + 1];	/* ascii name of user */
-+	/* BB may need ptr or callback for PAM or WinBind info */
-+};
-+
-+/*
-+ * Session structure.  One of these for each uid session with a particular host
-+ */
-+struct cifsSesInfo {
-+	struct list_head cifsSessionList;
-+	struct semaphore sesSem;
-+	struct cifsUidInfo *uidInfo;	/* pointer to user info */
-+	struct TCP_Server_Info *server;	/* pointer to server info */
-+	atomic_t inUse; /* # of mounts (tree connections) on this ses */
-+	enum statusEnum status;
-+	__u32 sequence_number;  /* needed for CIFS PDU signature */
-+	__u16 ipc_tid;		/* special tid for connection to IPC share */
-+	char mac_signing_key[CIFS_SESSION_KEY_SIZE + 16];	
-+	char *serverOS;		/* name of operating system underlying the server */
-+	char *serverNOS;	/* name of network operating system that the server is running */
-+	char *serverDomain;	/* security realm of server */
-+	int Suid;		/* remote smb uid  */
-+	uid_t linux_uid;        /* local Linux uid */
-+	int capabilities;
-+	char serverName[SERVER_NAME_LEN_WITH_NULL * 2];	/* BB make bigger for tcp names - will ipv6 and sctp addresses fit here?? */
-+	char userName[MAX_USERNAME_SIZE + 1];
-+	char domainName[MAX_USERNAME_SIZE + 1];
-+	char * password;
-+};
-+
-+/*
-+ * there is one of these for each connection to a resource on a particular
-+ * session 
-+ */
-+struct cifsTconInfo {
-+	struct list_head cifsConnectionList;
-+	struct list_head openFileList;
-+	struct semaphore tconSem;
-+	struct cifsSesInfo *ses;	/* pointer to session associated with */
-+	char treeName[MAX_TREE_SIZE + 1]; /* UNC name of resource (in ASCII not UTF) */
-+	char *nativeFileSystem;
-+	__u16 tid;		/* The 2 byte tree id */
-+	__u16 Flags;		/* optional support bits */
-+	enum statusEnum tidStatus;
-+	atomic_t useCount;	/* how many mounts (explicit or implicit) to this share */
-+#ifdef CONFIG_CIFS_STATS
-+	atomic_t num_smbs_sent;
-+	atomic_t num_writes;
-+	atomic_t num_reads;
-+	atomic_t num_oplock_brks;
-+	atomic_t num_opens;
-+	atomic_t num_deletes;
-+	atomic_t num_mkdirs;
-+	atomic_t num_rmdirs;
-+	atomic_t num_renames;
-+	atomic_t num_t2renames;
-+	__u64    bytes_read;
-+	__u64    bytes_written;
-+	spinlock_t stat_lock;
-+#endif
-+	FILE_SYSTEM_DEVICE_INFO fsDevInfo;
-+	FILE_SYSTEM_ATTRIBUTE_INFO fsAttrInfo;	/* ok if file system name truncated */
-+	FILE_SYSTEM_UNIX_INFO fsUnixInfo;
-+	int retry:1;
-+	/* BB add field for back pointer to sb struct? */
-+};
-+
-+/*
-+ * This info hangs off the cifsFileInfo structure.  This is used to track
-+ * byte stream locks on the file
-+ */
-+struct cifsLockInfo {
-+	struct cifsLockInfo *next;
-+	int start;
-+	int length;
-+	int type;
-+};
-+
-+/*
-+ * One of these for each open instance of a file
-+ */
-+struct cifsFileInfo {
-+	struct list_head tlist;	/* pointer to next fid owned by tcon */
-+	struct list_head flist;	/* next fid (file instance) for this inode */
-+	unsigned int uid;	/* allows finding which FileInfo structure */
-+	__u32 pid;		/* process id who opened file */
-+	__u16 netfid;		/* file id from remote */
-+	/* BB add lock scope info here if needed */ ;
-+	/* lock scope id (0 if none) */
-+	struct file * pfile; /* needed for writepage */
-+	struct inode * pInode; /* needed for oplock break */
-+	int endOfSearch:1;	/* we have reached end of search */
-+	int closePend:1;	/* file is marked to close */
-+	int emptyDir:1;
-+	int invalidHandle:1;  /* file closed via session abend */
-+	struct semaphore fh_sem; /* prevents reopen race after dead ses*/
-+	char * search_resume_name;
-+	unsigned int resume_name_length;
-+	__u32 resume_key;
-+};
-+
-+/*
-+ * One of these for each file inode
-+ */
-+
-+struct cifsInodeInfo {
-+	struct list_head lockList;
-+	/* BB add in lists for dirty pages - i.e. write caching info for oplock */
-+	struct list_head openFileList;
-+	int write_behind_rc;
-+	__u32 cifsAttrs; /* e.g. DOS archive bit, sparse, compressed, system */
-+	atomic_t inUse;	 /* num concurrent users (local openers cifs) of file*/
-+	unsigned long time;	/* jiffies of last update/check of inode */
-+	int clientCanCacheRead:1; /* read oplock */
-+	int clientCanCacheAll:1;  /* read and writebehind oplock */
-+	int oplockPending:1;
-+	struct inode vfs_inode;
-+};
-+
-+static inline struct cifsInodeInfo * CIFS_I(struct inode *inode)
-+{
-+        return (struct cifsInodeInfo *)&(inode->u);
-+}
-+
-+static inline struct cifs_sb_info * CIFS_SB(struct super_block *sb)
-+{
-+        return (struct cifs_sb_info *) &(sb->u);
-+}
-+
-+
-+/* one of these for every pending CIFS request to the server */
-+struct mid_q_entry {
-+	struct list_head qhead;	/* mids waiting on reply from this server */
-+	__u16 mid;		/* multiplex id */
-+	__u16 pid;		/* process id */
-+	__u32 sequence_number;  /* for CIFS signing */
-+	__u16 command;		/* smb command code */
-+	struct timeval when_sent;	/* time when smb sent */
-+	struct cifsSesInfo *ses;	/* smb was sent to this server */
-+	struct task_struct *tsk;	/* task waiting for response */
-+	struct smb_hdr *resp_buf;	/* response buffer */
-+	int midState;	/* wish this were enum but can not pass to wait_event */
-+};
-+
-+struct oplock_q_entry {
-+	struct list_head qhead;
-+	struct inode * pinode;
-+	struct cifsTconInfo * tcon; 
-+	__u16 netfid;
-+};
-+
-+#define   MID_FREE 0
-+#define   MID_REQUEST_ALLOCATED 1
-+#define   MID_REQUEST_SUBMITTED 2
-+#define   MID_RESPONSE_RECEIVED 4
-+#define   MID_RETRY_NEEDED      8 /* session closed while this request out */
-+
-+/*
-+ *****************************************************************
-+ * All constants go here
-+ *****************************************************************
-+ */
-+
-+#define UID_HASH (16)
-+
-+/*
-+ * Note that ONE module should define _DECLARE_GLOBALS_HERE to cause the
-+ * following to be declared.
-+ */
-+
-+/****************************************************************************
-+ *  Locking notes.  All updates to global variables and lists should be
-+ *                  protected by spinlocks or semaphores.
-+ *
-+ *  Spinlocks
-+ *  ---------
-+ *  GlobalMid_Lock protects:
-+ *	list operations on pending_mid_q and oplockQ
-+ *      updates to XID counters, multiplex id  and SMB sequence numbers
-+ *  GlobalSMBSesLock protects:
-+ *	list operations on tcp and SMB session lists and tCon lists
-+ *  f_owner.lock protects certain per file struct operations
-+ *  mapping->page_lock protects certain per page operations
-+ *
-+ *  Semaphores
-+ *  ----------
-+ *  sesSem     operations on smb session
-+ *  tconSem    operations on tree connection
-+ *  fh_sem      file handle reconnection operations 
-+ *
-+ ****************************************************************************/
-+
-+#ifdef DECLARE_GLOBALS_HERE
-+#define GLOBAL_EXTERN
-+#else
-+#define GLOBAL_EXTERN extern
-+#endif
-+
-+/*
-+ * The list of servers that did not respond with NT LM 0.12.
-+ * This list helps improve performance and eliminate the messages indicating
-+ * that we had a communications error talking to the server in this list. 
-+ */
-+GLOBAL_EXTERN struct servers_not_supported *NotSuppList;	/*@z4a */
-+
-+/*
-+ * The following is a hash table of all the users we know about.
-+ */
-+GLOBAL_EXTERN struct smbUidInfo *GlobalUidList[UID_HASH];
-+
-+GLOBAL_EXTERN struct list_head GlobalServerList; /* BB not implemented yet */
-+GLOBAL_EXTERN struct list_head GlobalSMBSessionList;
-+GLOBAL_EXTERN struct list_head GlobalTreeConnectionList;
-+GLOBAL_EXTERN rwlock_t GlobalSMBSeslock;  /* protects list inserts on 3 above */
-+
-+GLOBAL_EXTERN struct list_head GlobalOplock_Q;
-+
-+/*
-+ * Global transaction id (XID) information
-+ */
-+GLOBAL_EXTERN unsigned int GlobalCurrentXid;	/* protected by GlobalMid_Sem */
-+GLOBAL_EXTERN unsigned int GlobalTotalActiveXid;	/* prot by GlobalMid_Sem */
-+GLOBAL_EXTERN unsigned int GlobalMaxActiveXid;	/* prot by GlobalMid_Sem */
-+GLOBAL_EXTERN spinlock_t GlobalMid_Lock;  /* protects above and list operations */
-+					/* on midQ entries */
-+GLOBAL_EXTERN char Local_System_Name[15];
-+
-+/*
-+ *  Global counters, updated atomically
-+ */
-+GLOBAL_EXTERN atomic_t sesInfoAllocCount;
-+GLOBAL_EXTERN atomic_t tconInfoAllocCount;
-+
-+GLOBAL_EXTERN atomic_t tcpSesReconnectCount;
-+GLOBAL_EXTERN atomic_t tconInfoReconnectCount;
-+
-+/* Various Debug counters to remove someday (BB) */
-+GLOBAL_EXTERN atomic_t bufAllocCount;
-+GLOBAL_EXTERN atomic_t midCount;
-+
-+/* Misc globals */
-+GLOBAL_EXTERN unsigned int multiuser_mount;	/* if enabled allows new sessions
-+				to be established on existing mount if we
-+				have the uid/password or Kerberos credential 
-+				or equivalent for current user */
-+GLOBAL_EXTERN unsigned int oplockEnabled;
-+GLOBAL_EXTERN unsigned int quotaEnabled;
-+GLOBAL_EXTERN unsigned int lookupCacheEnabled;
-+GLOBAL_EXTERN unsigned int extended_security;	/* if on, session setup sent 
-+				with more secure ntlmssp2 challenge/resp */
-+GLOBAL_EXTERN unsigned int ntlmv2_support;  /* better optional password hash */
-+GLOBAL_EXTERN unsigned int sign_CIFS_PDUs;  /* enable smb packet signing */
-+GLOBAL_EXTERN unsigned int linuxExtEnabled;  /* enable Linux/Unix CIFS extensions */
-+
-diff -urN linux-2.4.29.old/fs/cifs/cifspdu.h linux-2.4.29/fs/cifs/cifspdu.h
---- linux-2.4.29.old/fs/cifs/cifspdu.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifspdu.h	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,1793 @@
-+/*
-+ *   fs/cifs/cifspdu.h
-+ *
-+ *   Copyright (c) International Business Machines  Corp., 2002
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 
-+ */
-+
-+#ifndef _CIFSPDU_H
-+#define _CIFSPDU_H
-+
-+#include <net/sock.h>
-+
-+#define CIFS_PROT   0
-+#define BAD_PROT    CIFS_PROT+1
-+
-+/* SMB command codes */
-+#define SMB_COM_CREATE_DIRECTORY      0x00
-+#define SMB_COM_DELETE_DIRECTORY      0x01
-+#define SMB_COM_CLOSE                 0x04
-+#define SMB_COM_DELETE                0x06
-+#define SMB_COM_RENAME                0x07
-+#define SMB_COM_LOCKING_ANDX          0x24
-+#define SMB_COM_COPY                  0x29
-+#define SMB_COM_READ_ANDX             0x2E
-+#define SMB_COM_WRITE_ANDX            0x2F
-+#define SMB_COM_TRANSACTION2          0x32
-+#define SMB_COM_TRANSACTION2_SECONDARY 0x33
-+#define SMB_COM_FIND_CLOSE2           0x34
-+#define SMB_COM_TREE_DISCONNECT       0x71
-+#define SMB_COM_NEGOTIATE             0x72
-+#define SMB_COM_SESSION_SETUP_ANDX    0x73
-+#define SMB_COM_LOGOFF_ANDX           0x74
-+#define SMB_COM_TREE_CONNECT_ANDX     0x75
-+#define SMB_COM_NT_TRANSACT           0xA0
-+#define SMB_COM_NT_TRANSACT_SECONDARY 0xA1
-+#define SMB_COM_NT_CREATE_ANDX        0xA2
-+#define SMB_COM_NT_RENAME             0xA5
-+
-+/* Transact2 subcommand codes */
-+#define TRANS2_OPEN                   0x00
-+#define TRANS2_FIND_FIRST             0x01
-+#define TRANS2_FIND_NEXT              0x02
-+#define TRANS2_QUERY_FS_INFORMATION   0x03
-+#define TRANS2_QUERY_PATH_INFORMATION 0x05
-+#define TRANS2_SET_PATH_INFORMATION   0x06
-+#define TRANS2_QUERY_FILE_INFORMATION 0x07
-+#define TRANS2_SET_FILE_INFORMATION   0x08
-+#define TRANS2_GET_DFS_REFERRAL       0x10
-+#define TRANS2_REPORT_DFS_INCOSISTENCY 0x11
-+
-+/* NT Transact subcommand codes */
-+#define NT_TRANSACT_CREATE            0x01
-+#define NT_TRANSACT_IOCTL             0x02
-+#define NT_TRANSACT_SET_SECURITY_DESC 0x03
-+#define NT_TRANSACT_NOTIFY_CHANGE     0x04
-+#define NT_TRANSACT_RENAME            0x05
-+#define NT_TRANSACT_QUERY_SECURITY_DESC 0x06
-+#define NT_TRANSACT_GET_USER_QUOTA    0x07
-+#define NT_TRANSACT_SET_USER_QUOTA    0x08
-+
-+#define MAX_CIFS_HDR_SIZE 256	/* chained NTCreateXReadX will probably be biggest */
-+
-+/* internal cifs vfs structures */
-+/*****************************************************************
-+ * All constants go here
-+ *****************************************************************
-+ */
-+
-+/*
-+ * Starting value for maximum SMB size negotiation
-+ */
-+#define CIFS_MAX_MSGSIZE (4*4096)
-+
-+/*
-+ * Size of encrypted user password in bytes
-+ */
-+#define CIFS_ENCPWD_SIZE (16)
-+
-+/*
-+ * Size of the crypto key returned on the negotiate SMB in bytes
-+ */
-+#define CIFS_CRYPTO_KEY_SIZE (8)
-+
-+/*
-+ * Size of the session key (crypto key encrypted with the password
-+ */
-+#define CIFS_SESSION_KEY_SIZE (24)
-+
-+/*
-+ * Maximum user name length
-+ */
-+#define CIFS_UNLEN (20)
-+
-+/*
-+ * Flags on SMB open
-+ */
-+#define SMBOPEN_WRITE_THROUGH 0x4000
-+#define SMBOPEN_DENY_ALL      0x0010
-+#define SMBOPEN_DENY_WRITE    0x0020
-+#define SMBOPEN_DENY_READ     0x0030
-+#define SMBOPEN_DENY_NONE     0x0040
-+#define SMBOPEN_READ          0x0000
-+#define SMBOPEN_WRITE         0x0001
-+#define SMBOPEN_READWRITE     0x0002
-+#define SMBOPEN_EXECUTE       0x0003
-+
-+#define SMBOPEN_OCREATE       0x0010
-+#define SMBOPEN_OTRUNC        0x0002
-+#define SMBOPEN_OAPPEND       0x0001
-+
-+/*
-+ * SMB flag definitions 
-+ */
-+#define SMBFLG_EXTD_LOCK 0x01	/* server supports lock-read write-unlock primitives */
-+#define SMBFLG_RCV_POSTED 0x02	/* obsolete */
-+#define SMBFLG_RSVD 0x04
-+#define SMBFLG_CASELESS 0x08	/* all pathnames treated as caseless (off implies case sensitive file handling requested) */
-+#define SMBFLG_CANONICAL_PATH_FORMAT 0x10	/* obsolete */
-+#define SMBFLG_OLD_OPLOCK 0x20	/* obsolete */
-+#define SMBFLG_OLD_OPLOCK_NOTIFY 0x40	/* obsolete */
-+#define SMBFLG_RESPONSE 0x80	/* this PDU is a response from server */
-+
-+/*
-+ * SMB flag2 definitions 
-+ */
-+#define SMBFLG2_KNOWS_LONG_NAMES 0x0001	/* can send long (non-8.3) path names in response */
-+#define SMBFLG2_KNOWS_EAS 0x0002
-+#define SMBFLG2_SECURITY_SIGNATURE 0x0004
-+#define SMBFLG2_IS_LONG_NAME 0x0040
-+#define SMBFLG2_EXT_SEC 0x0800
-+#define SMBFLG2_DFS 0x1000
-+#define SMBFLG2_PAGING_IO 0x2000
-+#define SMBFLG2_ERR_STATUS 0x4000
-+#define SMBFLG2_UNICODE 0x8000
-+
-+/*
-+ * These are the file access permission bits defined in CIFS for the
-+ * NTCreateAndX as well as the level 0x107
-+ * TRANS2_QUERY_PATH_INFORMATION API.  The level 0x107, SMB_QUERY_FILE_ALL_INFO
-+ * responds with the AccessFlags.
-+ * The AccessFlags specifies the access permissions a caller has to the
-+ * file and can have any suitable combination of the following values:
-+ */
-+
-+#define FILE_READ_DATA        0x00000001	/* Data can be read from the file   */
-+#define FILE_WRITE_DATA       0x00000002	/* Data can be written to the file  */
-+#define FILE_APPEND_DATA      0x00000004	/* Data can be appended to the file */
-+#define FILE_READ_EA          0x00000008	/* Extended attributes associated   */
-+					 /* with the file can be read        */
-+#define FILE_WRITE_EA         0x00000010	/* Extended attributes associated   */
-+					 /* with the file can be written     */
-+#define FILE_EXECUTE          0x00000020	/*Data can be read into memory from */
-+					 /* the file using system paging I/O */
-+#define FILE_DELETE_CHILD     0x00000040
-+#define FILE_READ_ATTRIBUTES  0x00000080	/* Attributes associated with the   */
-+					 /* file can be read                 */
-+#define FILE_WRITE_ATTRIBUTES 0x00000100	/* Attributes associated with the   */
-+					 /* file can be written              */
-+#define DELETE                0x00010000	/* The file can be deleted          */
-+#define READ_CONTROL          0x00020000	/* The access control list and      */
-+					 /* ownership associated with the    */
-+					 /* file can be read                 */
-+#define WRITE_DAC             0x00040000	/* The access control list and      */
-+					 /* ownership associated with the    */
-+					 /* file can be written.             */
-+#define WRITE_OWNER           0x00080000	/* Ownership information associated */
-+					 /* with the file can be written     */
-+#define SYNCHRONIZE           0x00100000	/* The file handle can waited on to */
-+					 /* synchronize with the completion  */
-+					 /* of an input/output request       */
-+#define GENERIC_ALL           0x10000000
-+#define GENERIC_EXECUTE       0x20000000
-+#define GENERIC_WRITE         0x40000000
-+#define GENERIC_READ          0x80000000
-+					 /* In summary - Relevant file       */
-+					 /* access flags from CIFS are       */
-+					 /* file_read_data, file_write_data  */
-+					 /* file_execute, file_read_attributes */
-+					 /* write_dac, and delete.           */
-+
-+/*
-+ * Invalid readdir handle
-+ */
-+#define CIFS_NO_HANDLE        0xFFFF
-+
-+/* IPC$ in ASCII */
-+#define CIFS_IPC_RESOURCE "\x49\x50\x43\x24"
-+
-+/* IPC$ in Unicode */
-+#define CIFS_IPC_UNICODE_RESOURCE "\x00\x49\x00\x50\x00\x43\x00\x24\x00\x00"
-+
-+/* Unicode Null terminate 2 bytes of 0 */
-+#define UNICODE_NULL "\x00\x00"
-+#define ASCII_NULL 0x00
-+
-+/*
-+ * Server type values (returned on EnumServer API
-+ */
-+#define CIFS_SV_TYPE_DC     0x00000008
-+#define CIFS_SV_TYPE_BACKDC 0x00000010
-+
-+/*
-+ * Alias type flags (From EnumAlias API call
-+ */
-+#define CIFS_ALIAS_TYPE_FILE 0x0001
-+#define CIFS_SHARE_TYPE_FILE 0x0000
-+
-+/*
-+ * File Attribute flags
-+ */
-+#define ATTR_READONLY  0x0001
-+#define ATTR_HIDDEN    0x0002
-+#define ATTR_SYSTEM    0x0004
-+#define ATTR_VOLUME    0x0008
-+#define ATTR_DIRECTORY 0x0010
-+#define ATTR_ARCHIVE   0x0020
-+#define ATTR_DEVICE    0x0040
-+#define ATTR_NORMAL    0x0080
-+#define ATTR_TEMPORARY 0x0100
-+#define ATTR_SPARSE    0x0200
-+#define ATTR_REPARSE   0x0400
-+#define ATTR_COMPRESSED 0x0800
-+#define ATTR_OFFLINE    0x1000	/* ie file not immediately available - offline storage */
-+#define ATTR_NOT_CONTENT_INDEXED 0x2000
-+#define ATTR_ENCRYPTED  0x4000
-+#define ATTR_POSIX_SEMANTICS 0x01000000
-+#define ATTR_BACKUP_SEMANTICS 0x02000000
-+#define ATTR_DELETE_ON_CLOSE 0x04000000
-+#define ATTR_SEQUENTIAL_SCAN 0x08000000
-+#define ATTR_RANDOM_ACCESS   0x10000000
-+#define ATTR_NO_BUFFERING    0x20000000
-+#define ATTR_WRITE_THROUGH   0x80000000
-+
-+/* ShareAccess flags */
-+#define FILE_NO_SHARE     0x00000000
-+#define FILE_SHARE_READ   0x00000001
-+#define FILE_SHARE_WRITE  0x00000002
-+#define FILE_SHARE_DELETE 0x00000004
-+#define FILE_SHARE_ALL    0x00000007
-+
-+/* CreateDisposition flags */
-+#define FILE_SUPERSEDE    0x00000000
-+#define FILE_OPEN         0x00000001
-+#define FILE_CREATE       0x00000002
-+#define FILE_OPEN_IF      0x00000003
-+#define FILE_OVERWRITE    0x00000004
-+#define FILE_OVERWRITE_IF 0x00000005
-+
-+/* CreateOptions */
-+#define CREATE_NOT_FILE		0x00000001	/* if set must not be file */
-+#define CREATE_WRITE_THROUGH	0x00000002
-+#define CREATE_NOT_DIR		0x00000040	/* if set must not be directory */
-+#define CREATE_RANDOM_ACCESS	0x00000800
-+#define CREATE_DELETE_ON_CLOSE	0x00001000
-+#define OPEN_REPARSE_POINT	0x00200000
-+
-+/* ImpersonationLevel flags */
-+#define SECURITY_ANONYMOUS      0
-+#define SECURITY_IDENTIFICATION 1
-+#define SECURITY_IMPERSONATION  2
-+#define SECURITY_DELEGATION     3
-+
-+/* SecurityFlags */
-+#define SECURITY_CONTEXT_TRACKING 0x01
-+#define SECURITY_EFFECTIVE_ONLY   0x02
-+
-+/*
-+ * Default PID value, used in all SMBs where the PID is not important
-+ */
-+#define CIFS_DFT_PID  0x1234
-+
-+/*
-+ * We use the same routine for Copy and Move SMBs.  This flag is used to
-+ * distinguish
-+ */
-+#define CIFS_COPY_OP 1
-+#define CIFS_RENAME_OP 2
-+
-+#define GETU16(var)  (*((__u16 *)var))	/* BB check for endian issues */
-+#define GETU32(var)  (*((__u32 *)var))	/* BB check for endian issues */
-+
-+#pragma pack(1)
-+
-+struct smb_hdr {
-+	__u32 smb_buf_length;	/* big endian on wire *//* BB length is only two or three bytes - with one or two byte type preceding it but that is always zero - we could mask the type byte off just in case BB */
-+	__u8 Protocol[4];
-+	__u8 Command;
-+	union {
-+		struct {
-+			__u8 ErrorClass;
-+			__u8 Reserved;
-+			__u16 Error;	/* note: treated as little endian (le) on wire */
-+		} DosError;
-+		__u32 CifsError;	/* note: le */
-+	} Status;
-+	__u8 Flags;
-+	__u16 Flags2;		/* note: le */
-+	__u16 PidHigh;		/* note: le */
-+	union {
-+		struct {
-+			__u32 SequenceNumber;  /* le */
-+			__u32 Reserved; /* zero */
-+		} Sequence;
-+		__u8 SecuritySignature[8];	/* le */
-+	} Signature;
-+	__u8 pad[2];
-+	__u16 Tid;
-+	__u16 Pid;		/* note: le */
-+	__u16 Uid;
-+	__u16 Mid;
-+	__u8 WordCount;
-+};
-+/* given a pointer to an smb_hdr retrieve the value of byte count */
-+#define BCC(smb_var) ( *(__u16 *)((char *)smb_var + sizeof(struct smb_hdr) + (2* smb_var->WordCount) ) )
-+
-+/* given a pointer to an smb_hdr retrieve the pointer to the byte area */
-+#define pByteArea(smb_var) ((char *)smb_var + sizeof(struct smb_hdr) + (2* smb_var->WordCount) + 2 )
-+
-+/*
-+ * Computer Name Length
-+ */
-+#define CNLEN 15
-+
-+/*
-+ * Share Name Length					  @S8A
-+ * Note:  This length is limited by the SMB used to get   @S8A
-+ *        the Share info.   NetShareEnum only returns 13  @S8A
-+ *        chars, including the null termination.          @S8A 
-+ */
-+#define SNLEN 12		/*@S8A */
-+
-+/*
-+ * Comment Length
-+ */
-+#define MAXCOMMENTLEN 40
-+
-+/*
-+ * The OS/2 maximum path name
-+ */
-+#define MAX_PATHCONF 256
-+
-+/*
-+ *  SMB frame definitions  (following must be packed structs)
-+ *  See the SNIA CIFS Specification for details.
-+ *
-+ *  The Naming convention is the lower case version of the
-+ *  smb command code name for the struct and this is typedef to the
-+ *  uppercase version of the same name with the prefix SMB_ removed 
-+ *  for brevity.  Although typedefs are not commonly used for 
-+ *  structure definitions in the Linux kernel, their use in the
-+ *  CIFS standards document, which this code is based on, may
-+ *  make this one of the cases where typedefs for structures make
-+ *  sense to improve readability for readers of the standards doc.
-+ *  Typedefs can always be removed later if they are too distracting
-+ *  and they are only used for the CIFSs PDUs themselves, not
-+ *  internal cifs vfs structures
-+ *  
-+ */
-+
-+typedef struct negotiate_req {
-+	struct smb_hdr hdr;	/* wct = 0 */
-+	__u16 ByteCount;
-+	unsigned char DialectsArray[1];
-+} NEGOTIATE_REQ;
-+
-+typedef struct negotiate_rsp {
-+	struct smb_hdr hdr;	/* wct = 17 */
-+	__u16 DialectIndex;
-+	__u8 SecurityMode;
-+	__u16 MaxMpxCount;
-+	__u16 MaxNumberVcs;
-+	__u32 MaxBufferSize;
-+	__u32 MaxRawSize;
-+	__u32 SessionKey;
-+	__u32 Capabilities;	/* see below */
-+	__u32 SystemTimeLow;
-+	__u32 SystemTimeHigh;
-+	__u16 ServerTimeZone;
-+	__u8 EncryptionKeyLength;
-+	__u16 ByteCount;
-+	union {
-+		unsigned char EncryptionKey[1];	/* if cap extended security is off */
-+		/* followed by Domain name - if extended security is off */
-+		/* followed by 16 bytes of server GUID */
-+		/* followed by security blob if cap_extended_security negotiated */
-+		struct {
-+			unsigned char GUID[16];
-+			unsigned char SecurityBlob[1];
-+		} extended_response;
-+	} u;
-+} NEGOTIATE_RSP;
-+
-+/* SecurityMode bits */
-+#define SECMODE_USER          0x01	/* off indicates share level security */
-+#define SECMODE_PW_ENCRYPT    0x02
-+#define SECMODE_SIGN_ENABLED  0x04	/* SMB security signatures enabled */
-+#define SECMODE_SIGN_REQUIRED 0x08	/* SMB security signatures required */
-+
-+/* Negotiate response Capabilities */
-+#define CAP_RAW_MODE           0x00000001
-+#define CAP_MPX_MODE           0x00000002
-+#define CAP_UNICODE            0x00000004
-+#define CAP_LARGE_FILES        0x00000008
-+#define CAP_NT_SMBS            0x00000010	/* implies CAP_NT_FIND */
-+#define CAP_RPC_REMOTE_APIS    0x00000020
-+#define CAP_STATUS32           0x00000040
-+#define CAP_LEVEL_II_OPLOCKS   0x00000080
-+#define CAP_LOCK_AND_READ      0x00000100
-+#define CAP_NT_FIND            0x00000200
-+#define CAP_DFS                0x00001000
-+#define CAP_INFOLEVEL_PASSTHRU 0x00002000
-+#define CAP_LARGE_READ_X       0x00004000
-+#define CAP_LARGE_WRITE_X      0x00008000
-+#define CAP_UNIX               0x00800000
-+#define CAP_RESERVED           0x02000000
-+#define CAP_BULK_TRANSFER      0x20000000
-+#define CAP_COMPRESSED_DATA    0x40000000
-+#define CAP_EXTENDED_SECURITY  0x80000000
-+
-+typedef union smb_com_session_setup_andx {
-+	struct {		/* request format */
-+		struct smb_hdr hdr;	/* wct = 12 */
-+		__u8 AndXCommand;
-+		__u8 AndXReserved;
-+		__u16 AndXOffset;
-+		__u16 MaxBufferSize;
-+		__u16 MaxMpxCount;
-+		__u16 VcNumber;
-+		__u32 SessionKey;
-+		__u16 SecurityBlobLength;
-+		__u32 Reserved;
-+		__u32 Capabilities;	/* see below */
-+		__u16 ByteCount;
-+		unsigned char SecurityBlob[1];	/* followed by */
-+		/* STRING NativeOS */
-+		/* STRING NativeLanMan */
-+	} req;			/* NTLM request format (with extended security */
-+
-+	struct {		/* request format */
-+		struct smb_hdr hdr;	/* wct = 13 */
-+		__u8 AndXCommand;
-+		__u8 AndXReserved;
-+		__u16 AndXOffset;
-+		__u16 MaxBufferSize;
-+		__u16 MaxMpxCount;
-+		__u16 VcNumber;
-+		__u32 SessionKey;
-+		__u16 CaseInsensitivePasswordLength;	/* ASCII password length */
-+		__u16 CaseSensitivePasswordLength;	/* Unicode password length */
-+		__u32 Reserved;	/* see below */
-+		__u32 Capabilities;
-+		__u16 ByteCount;
-+		unsigned char CaseInsensitivePassword[1];	/* followed by: */
-+		/* unsigned char * CaseSensitivePassword; */
-+		/* STRING AccountName */
-+		/* STRING PrimaryDomain */
-+		/* STRING NativeOS */
-+		/* STRING NativeLanMan */
-+	} req_no_secext;	/* NTLM request format (without extended security */
-+
-+	struct {		/* default (NTLM) response format */
-+		struct smb_hdr hdr;	/* wct = 4 */
-+		__u8 AndXCommand;
-+		__u8 AndXReserved;
-+		__u16 AndXOffset;
-+		__u16 Action;	/* see below */
-+		__u16 SecurityBlobLength;
-+		__u16 ByteCount;
-+		unsigned char SecurityBlob[1];	/* followed by */
-+/*      unsigned char  * NativeOS;      */
-+/*	unsigned char  * NativeLanMan;  */
-+/*      unsigned char  * PrimaryDomain; */
-+	} resp;			/* NTLM response format (with or without extended security */
-+
-+	struct {		/* request format */
-+		struct smb_hdr hdr;	/* wct = 10 */
-+		__u8 AndXCommand;
-+		__u8 AndXReserved;
-+		__u16 AndXOffset;
-+		__u16 MaxBufferSize;
-+		__u16 MaxMpxCount;
-+		__u16 VcNumber;
-+		__u32 SessionKey;
-+		__u16 PassswordLength;
-+		__u32 Reserved;
-+		__u16 ByteCount;
-+		unsigned char AccountPassword[1];	/* followed by */
-+		/* STRING AccountName */
-+		/* STRING PrimaryDomain */
-+		/* STRING NativeOS */
-+		/* STRING NativeLanMan */
-+	} old_req;		/* pre-NTLM (LANMAN2.1) request format */
-+
-+	struct {		/* default (NTLM) response format */
-+		struct smb_hdr hdr;	/* wct = 3 */
-+		__u8 AndXCommand;
-+		__u8 AndXReserved;
-+		__u16 AndXOffset;
-+		__u16 Action;	/* see below */
-+		__u16 ByteCount;
-+		unsigned char NativeOS[1];	/* followed by */
-+/*	unsigned char * NativeLanMan; */
-+/*      unsigned char * PrimaryDomain; */
-+	} old_resp;		/* pre-NTLM (LANMAN2.1) response format */
-+} SESSION_SETUP_ANDX;
-+
-+#define CIFS_NETWORK_OPSYS "CIFS VFS Client for Linux"
-+
-+/* Capabilities bits (for NTLM SessSetup request) */
-+#define CAP_UNICODE            0x00000004
-+#define CAP_LARGE_FILES        0x00000008
-+#define CAP_NT_SMBS            0x00000010
-+#define CAP_STATUS32           0x00000040
-+#define CAP_LEVEL_II_OPLOCKS   0x00000080
-+#define CAP_NT_FIND            0x00000200	/* reserved should be zero (presumably because NT_SMBs implies the same thing) */
-+#define CAP_BULK_TRANSFER      0x20000000
-+#define CAP_EXTENDED_SECURITY  0x80000000
-+
-+/* Action bits */
-+#define GUEST_LOGIN 1
-+
-+typedef struct smb_com_tconx_req {
-+	struct smb_hdr hdr;	/* wct = 4 */
-+	__u8 AndXCommand;
-+	__u8 AndXReserved;
-+	__u16 AndXOffset;
-+	__u16 Flags;		/* see below */
-+	__u16 PasswordLength;
-+	__u16 ByteCount;
-+	unsigned char Password[1];	/* followed by */
-+/* STRING Path    *//* \\server\share name */
-+	/* STRING Service */
-+} TCONX_REQ;
-+
-+typedef struct smb_com_tconx_rsp {
-+	struct smb_hdr hdr;	/* wct = 3 *//* note that Win2000 has sent wct=7 in some cases on responses. Four unspecified words followed OptionalSupport */
-+	__u8 AndXCommand;
-+	__u8 AndXReserved;
-+	__u16 AndXOffset;
-+	__u16 OptionalSupport;	/* see below */
-+	__u16 ByteCount;
-+	unsigned char Service[1];	/* always ASCII, not Unicode */
-+	/* STRING NativeFileSystem */
-+} TCONX_RSP;
-+
-+/* tree connect Flags */
-+#define DISCONNECT_TID          0x0001
-+#define TCON_EXTENDED_SECINFO   0x0008
-+/* OptionalSupport bits */
-+#define SMB_SUPPORT_SEARCH_BITS 0x0001	/* must have bits (exclusive searches suppt. */
-+#define SMB_SHARE_IS_IN_DFS     0x0002
-+
-+typedef struct smb_com_logoff_andx_req {
-+
-+	struct smb_hdr hdr;	/* wct = 2 */
-+	__u8 AndXCommand;
-+	__u8 AndXReserved;
-+	__u16 AndXOffset;
-+	__u16 ByteCount;
-+} LOGOFF_ANDX_REQ;
-+
-+typedef struct smb_com_logoff_andx_rsp {
-+	struct smb_hdr hdr;	/* wct = 2 */
-+	__u8 AndXCommand;
-+	__u8 AndXReserved;
-+	__u16 AndXOffset;
-+	__u16 ByteCount;
-+} LOGOFF_ANDX_RSP;
-+
-+typedef union smb_com_tree_disconnect {	/* as an altetnative can use flag on tree_connect PDU to effect disconnect *//* probably the simplest SMB PDU */
-+	struct {
-+		struct smb_hdr hdr;	/* wct = 0 */
-+		__u16 ByteCount;	/* bcc = 0 */
-+	} req;
-+	struct {
-+		struct smb_hdr hdr;	/* wct = 0 */
-+		__u16 ByteCount;	/* bcc = 0 */
-+	} resp;
-+} TREE_DISCONNECT;
-+
-+typedef struct smb_com_close_req {
-+	struct smb_hdr hdr;	/* wct = 3 */
-+	__u16 FileID;
-+	__u32 LastWriteTime;	/* should be zero */
-+	__u16 ByteCount;	/* 0 */
-+} CLOSE_REQ;
-+
-+typedef struct smb_com_close_rsp {
-+	struct smb_hdr hdr;	/* wct = 0 */
-+	__u16 ByteCount;	/* bct = 0 */
-+} CLOSE_RSP;
-+
-+typedef struct smb_com_findclose_req {
-+	struct smb_hdr hdr; /* wct = 1 */
-+	__u16 FileID;
-+	__u16 ByteCount;    /* 0 */
-+} FINDCLOSE_REQ;
-+
-+/* OpenFlags */
-+#define REQ_OPLOCK         0x00000002
-+#define REQ_BATCHOPLOCK    0x00000004
-+#define REQ_OPENDIRONLY    0x00000008
-+
-+typedef struct smb_com_open_req {	/* also handles create */
-+	struct smb_hdr hdr;	/* wct = 24 */
-+	__u8 AndXCommand;
-+	__u8 AndXReserved;
-+	__u16 AndXOffset;
-+	__u8 Reserved;		/* Must Be Zero */
-+	__u16 NameLength;
-+	__u32 OpenFlags;
-+	__u32 RootDirectoryFid;
-+	__u32 DesiredAccess;
-+	__u64 AllocationSize;
-+	__u32 FileAttributes;
-+	__u32 ShareAccess;
-+	__u32 CreateDisposition;
-+	__u32 CreateOptions;
-+	__u32 ImpersonationLevel;
-+	__u8 SecurityFlags;
-+	__u16 ByteCount;
-+	char fileName[1];
-+} OPEN_REQ;
-+
-+/* open response: oplock levels */
-+#define OPLOCK_NONE  	 0
-+#define OPLOCK_EXCLUSIVE 1
-+#define OPLOCK_BATCH	 2
-+#define OPLOCK_READ	 3  /* level 2 oplock */
-+
-+/* open response for CreateAction shifted left */
-+#define CIFS_CREATE_ACTION 0x20000 /* file created */
-+
-+typedef struct smb_com_open_rsp {
-+	struct smb_hdr hdr;	/* wct = 34 BB */
-+	__u8 AndXCommand;
-+	__u8 AndXReserved;
-+	__u16 AndXOffset;
-+	__u8 OplockLevel;
-+	__u16 Fid;
-+	__u32 CreateAction;
-+	__u64 CreationTime;
-+	__u64 LastAccessTime;
-+	__u64 LastWriteTime;
-+	__u64 ChangeTime;
-+	__u32 FileAttributes;
-+	__u64 AllocationSize;
-+	__u64 EndOfFile;
-+	__u16 FileType;
-+	__u16 DeviceState;
-+	__u8 DirectoryFlag;
-+	__u16 ByteCount;	/* bct = 0 */
-+} OPEN_RSP;
-+
-+typedef struct smb_com_write_req {
-+	struct smb_hdr hdr;	/* wct = 14 */
-+	__u8 AndXCommand;
-+	__u8 AndXReserved;
-+	__u16 AndXOffset;
-+	__u16 Fid;
-+	__u32 OffsetLow;
-+	__u32 Reserved;
-+	__u16 WriteMode;
-+	__u16 Remaining;
-+	__u16 DataLengthHigh;
-+	__u16 DataLengthLow;
-+	__u16 DataOffset;
-+	__u32 OffsetHigh;
-+	__u16 ByteCount;
-+	__u8 Pad;		/* BB check for whether padded to DWORD boundary and optimum performance here */
-+	char Data[1];
-+} WRITE_REQ;
-+
-+typedef struct smb_com_write_rsp {
-+	struct smb_hdr hdr;	/* wct = 6 */
-+	__u8 AndXCommand;
-+	__u8 AndXReserved;
-+	__u16 AndXOffset;
-+	__u16 Count;
-+	__u16 Remaining;
-+	__u32 Reserved;
-+	__u16 ByteCount;
-+} WRITE_RSP;
-+
-+typedef struct smb_com_read_req {
-+	struct smb_hdr hdr;	/* wct = 12 */
-+	__u8 AndXCommand;
-+	__u8 AndXReserved;
-+	__u16 AndXOffset;
-+	__u16 Fid;
-+	__u32 OffsetLow;
-+	__u16 MaxCount;
-+	__u16 MinCount;		/* obsolete */
-+	__u32 MaxCountHigh;
-+	__u16 Remaining;
-+	__u32 OffsetHigh;
-+	__u16 ByteCount;
-+} READ_REQ;
-+
-+typedef struct smb_com_read_rsp {
-+	struct smb_hdr hdr;	/* wct = 12 */
-+	__u8 AndXCommand;
-+	__u8 AndXReserved;
-+	__u16 AndXOffset;
-+	__u16 Remaining;
-+	__u16 DataCompactionMode;
-+	__u16 Reserved;
-+	__u16 DataLength;
-+	__u16 DataOffset;
-+	__u16 DataLengthHigh;
-+	__u64 Reserved2;
-+	__u16 ByteCount;
-+	__u8 Pad;		/* BB check for whether padded to DWORD boundary and optimum performance here */
-+	char Data[1];
-+} READ_RSP;
-+
-+typedef struct locking_andx_range {
-+	__u16 Pid;
-+	__u16 Pad;
-+	__u32 OffsetHigh;
-+	__u32 OffsetLow;
-+	__u32 LengthHigh;
-+	__u32 LengthLow;
-+} LOCKING_ANDX_RANGE;
-+
-+#define LOCKING_ANDX_SHARED_LOCK     0x01
-+#define LOCKING_ANDX_OPLOCK_RELEASE  0x02
-+#define LOCKING_ANDX_CHANGE_LOCKTYPE 0x04
-+#define LOCKING_ANDX_CANCEL_LOCK     0x08
-+#define LOCKING_ANDX_LARGE_FILES     0x10	/* always on for us */
-+
-+typedef struct smb_com_lock_req {
-+	struct smb_hdr hdr;	/* wct = 8 */
-+	__u8 AndXCommand;
-+	__u8 AndXReserved;
-+	__u16 AndXOffset;
-+	__u16 Fid;
-+	__u8 LockType;
-+	__u8 OplockLevel;
-+	__u32 Timeout;
-+	__u16 NumberOfUnlocks;
-+	__u16 NumberOfLocks;
-+	__u16 ByteCount;
-+	LOCKING_ANDX_RANGE Locks[1];
-+} LOCK_REQ;
-+
-+typedef struct smb_com_lock_rsp {
-+	struct smb_hdr hdr;	/* wct = 2 */
-+	__u8 AndXCommand;
-+	__u8 AndXReserved;
-+	__u16 AndXOffset;
-+	__u16 ByteCount;
-+} LOCK_RSP;
-+
-+typedef struct smb_com_rename_req {
-+	struct smb_hdr hdr;	/* wct = 1 */
-+	__u16 SearchAttributes;	/* target file attributes */
-+	__u16 ByteCount;
-+	__u8 BufferFormat;	/* 4 = ASCII or Unicode */
-+	unsigned char OldFileName[1];
-+	/* followed by __u8 BufferFormat2 */
-+	/* followed by NewFileName */
-+} RENAME_REQ;
-+
-+	/* copy request flags */
-+#define COPY_MUST_BE_FILE      0x0001
-+#define COPY_MUST_BE_DIR       0x0002
-+#define COPY_TARGET_MODE_ASCII 0x0004 /* if not set, binary */
-+#define COPY_SOURCE_MODE_ASCII 0x0008 /* if not set, binary */
-+#define COPY_VERIFY_WRITES     0x0010
-+#define COPY_TREE              0x0020 
-+
-+typedef struct smb_com_copy_req {
-+	struct smb_hdr hdr;	/* wct = 3 */
-+	__u16 Tid2;
-+	__u16 OpenFunction;
-+	__u16 Flags;
-+	__u16 ByteCount;
-+	__u8 BufferFormat;	/* 4 = ASCII or Unicode */ 
-+	unsigned char OldFileName[1];
-+	/* followed by __u8 BufferFormat2 */
-+	/* followed by NewFileName string */
-+} COPY_REQ;
-+
-+typedef struct smb_com_copy_rsp {
-+	struct smb_hdr hdr;     /* wct = 1 */
-+	__u16 CopyCount;    /* number of files copied */
-+	__u16 ByteCount;    /* may be zero */
-+	__u8 BufferFormat;  /* 0x04 - only present if errored file follows */
-+	unsigned char ErrorFileName[1]; /* only present if error in copy */
-+} COPY_RSP;
-+
-+#define CREATE_HARD_LINK		0x103
-+#define MOVEFILE_COPY_ALLOWED		0x0002
-+#define MOVEFILE_REPLACE_EXISTING	0x0001
-+
-+typedef struct smb_com_nt_rename_req {	/* A5 - also used for create hardlink */
-+	struct smb_hdr hdr;	/* wct = 4 */
-+	__u16 SearchAttributes;	/* target file attributes */
-+	__u16 Flags;		/* spec says Information Level */
-+	__u32 ClusterCount;
-+	__u16 ByteCount;
-+	__u8 BufferFormat;	/* 4 = ASCII or Unicode */
-+	unsigned char OldFileName[1];
-+	/* followed by __u8 BufferFormat2 */
-+	/* followed by NewFileName */
-+} NT_RENAME_REQ;
-+
-+typedef struct smb_com_rename_rsp {
-+	struct smb_hdr hdr;	/* wct = 0 */
-+	__u16 ByteCount;	/* bct = 0 */
-+} RENAME_RSP;
-+
-+typedef struct smb_com_delete_file_req {
-+	struct smb_hdr hdr;	/* wct = 1 */
-+	__u16 SearchAttributes;
-+	__u16 ByteCount;
-+	__u8 BufferFormat;	/* 4 = ASCII */
-+	unsigned char fileName[1];
-+} DELETE_FILE_REQ;
-+
-+typedef struct smb_com_delete_file_rsp {
-+	struct smb_hdr hdr;	/* wct = 0 */
-+	__u16 ByteCount;	/* bct = 0 */
-+} DELETE_FILE_RSP;
-+
-+typedef struct smb_com_delete_directory_req {
-+	struct smb_hdr hdr;	/* wct = 0 */
-+	__u16 ByteCount;
-+	__u8 BufferFormat;	/* 4 = ASCII */
-+	unsigned char DirName[1];
-+} DELETE_DIRECTORY_REQ;
-+
-+typedef struct smb_com_delete_directory_rsp {
-+	struct smb_hdr hdr;	/* wct = 0 */
-+	__u16 ByteCount;	/* bct = 0 */
-+} DELETE_DIRECTORY_RSP;
-+
-+typedef struct smb_com_create_directory_req {
-+	struct smb_hdr hdr;	/* wct = 0 */
-+	__u16 ByteCount;
-+	__u8 BufferFormat;	/* 4 = ASCII */
-+	unsigned char DirName[1];
-+} CREATE_DIRECTORY_REQ;
-+
-+typedef struct smb_com_create_directory_rsp {
-+	struct smb_hdr hdr;	/* wct = 0 */
-+	__u16 ByteCount;	/* bct = 0 */
-+} CREATE_DIRECTORY_RSP;
-+
-+/***************************************************/
-+/* NT Transact structure defintions follow         */
-+/* Currently only ioctl and notify are implemented */
-+/***************************************************/
-+typedef struct smb_com_transaction_ioctl_req {
-+	struct smb_hdr hdr;	/* wct = 23 */
-+	__u8 MaxSetupCount;
-+	__u16 Reserved;
-+	__u32 TotalParameterCount;
-+	__u32 TotalDataCount;
-+	__u32 MaxParameterCount;
-+	__u32 MaxDataCount;
-+	__u32 ParameterCount;
-+	__u32 ParameterOffset;
-+	__u32 DataCount;
-+	__u32 DataOffset;
-+	__u8 SetupCount; /* four setup words follow subcommand */
-+	/* SNIA spec incorrectly included spurious pad here */
-+	__u16 SubCommand;/* 2 = IOCTL/FSCTL */
-+	__u32 FunctionCode;
-+	__u16 Fid;
-+	__u8 IsFsctl;    /* 1 = File System Control, 0 = device control (IOCTL)*/
-+	__u8 IsRootFlag; /* 1 = apply command to root of share (must be DFS share)*/
-+	__u16 ByteCount;
-+	__u8 Pad[3];
-+	__u8 Data[1];
-+} TRANSACT_IOCTL_REQ;
-+
-+typedef struct smb_com_transaction_ioctl_rsp {
-+	struct smb_hdr hdr;	/* wct = 19 */
-+	__u8 Reserved[3];
-+	__u32 TotalParameterCount;
-+	__u32 TotalDataCount;
-+	__u32 ParameterCount;
-+	__u32 ParameterOffset;
-+	__u32 ParameterDisplacement;
-+	__u32 DataCount;
-+	__u32 DataOffset;
-+	__u32 DataDisplacement;
-+	__u8 SetupCount;	/* 1 */
-+	__u16 ReturnedDataLen;
-+	__u16 ByteCount;
-+	__u8 Pad[3];
-+} TRANSACT_IOCTL_RSP;
-+
-+typedef struct smb_com_transaction_change_notify_req {
-+	struct smb_hdr hdr;     /* wct = 23 */
-+	__u8 MaxSetupCount;
-+	__u16 Reserved;
-+	__u32 TotalParameterCount;
-+	__u32 TotalDataCount;
-+	__u32 MaxParameterCount;
-+	__u32 MaxDataCount;
-+	__u32 ParameterCount;
-+	__u32 ParameterOffset;
-+	__u32 DataCount;
-+	__u32 DataOffset;
-+	__u8 SetupCount; /* four setup words follow subcommand */
-+	/* SNIA spec incorrectly included spurious pad here */
-+	__u16 SubCommand;/* 4 = Change Notify */
-+	__u32 CompletionFilter;  /* operation to monitor */
-+	__u16 Fid;
-+	__u8 WatchTree;  /* 1 = Monitor subdirectories */
-+	__u8 Reserved2;
-+	__u16 ByteCount;
-+/* __u8 Pad[3];*/
-+/*	__u8 Data[1];*/
-+} TRANSACT_CHANGE_NOTIFY_REQ;
-+
-+typedef struct smb_com_transaction_change_notify_rsp {
-+	struct smb_hdr hdr;	/* wct = 18 */
-+	__u8 Reserved[3];
-+	__u32 TotalParameterCount;
-+	__u32 TotalDataCount;
-+	__u32 ParameterCount;
-+	__u32 ParameterOffset;
-+	__u32 ParameterDisplacement;
-+	__u32 DataCount;
-+	__u32 DataOffset;
-+	__u32 DataDisplacement;
-+	__u8 SetupCount;   /* 0 */
-+	__u16 ByteCount;
-+	/* __u8 Pad[3]; */
-+} TRANSACT_CHANGE_NOTIFY_RSP;
-+/* Completion Filter flags for Notify */
-+#define FILE_NOTIFY_CHANGE_FILE_NAME    0x00000001
-+#define FILE_NOTIFY_CHANGE_DIR_NAME     0x00000002
-+#define FILE_NOTIFY_CHANGE_NAME         0x00000003
-+#define FILE_NOTIFY_CHANGE_ATTRIBUTES   0x00000004
-+#define FILE_NOTIFY_CHANGE_SIZE         0x00000008
-+#define FILE_NOTIFY_CHANGE_LAST_WRITE   0x00000010
-+#define FILE_NOTIFY_CHANGE_LAST_ACCESS  0x00000020
-+#define FILE_NOTIFY_CHANGE_CREATION     0x00000040
-+#define FILE_NOTIFY_CHANGE_EA           0x00000080
-+#define FILE_NOTIFY_CHANGE_SECURITY     0x00000100
-+#define FILE_NOTIFY_CHANGE_STREAM_NAME  0x00000200
-+#define FILE_NOTIFY_CHANGE_STREAM_SIZE  0x00000400
-+#define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800
-+
-+#define FILE_ACTION_ADDED		0x00000001
-+#define FILE_ACTION_REMOVED		0x00000002
-+#define FILE_ACTION_MODIFIED		0x00000003
-+#define FILE_ACTION_RENAMED_OLD_NAME	0x00000004
-+#define FILE_ACTION_RENAMED_NEW_NAME	0x00000005
-+#define FILE_ACTION_ADDED_STREAM	0x00000006
-+#define FILE_ACTION_REMOVED_STREAM	0x00000007
-+#define FILE_ACTION_MODIFIED_STREAM	0x00000008
-+
-+/* response contains array of the following structures */
-+struct file_notify_information {
-+	__u32 NextEntryOffset;
-+	__u32 Action;
-+	__u32 FileNameLength;
-+	__u8  FileName[1];
-+}; 
-+
-+struct reparse_data {
-+	__u32	ReparseTag;
-+	__u16	ReparseDataLength;
-+	__u16	Reserved;
-+	__u16	AltNameOffset;
-+	__u16	AltNameLen;
-+	__u16	TargetNameOffset;
-+	__u16	TargetNameLen;
-+	char	LinkNamesBuf[1];
-+};
-+
-+struct cifs_quota_data {
-+	__u32	rsrvd1;  /* 0 */
-+	__u32	sid_size;
-+	__u64	rsrvd2;  /* 0 */
-+	__u64	space_used;
-+	__u64	soft_limit;
-+	__u64	hard_limit;
-+	char	sid[1];  /* variable size? */
-+};
-+
-+/* quota sub commands */
-+#define QUOTA_LIST_CONTINUE	    0
-+#define QUOTA_LIST_START	0x100
-+#define QUOTA_FOR_SID		0x101
-+
-+typedef union smb_com_transaction2 {
-+	struct {
-+		struct smb_hdr hdr;	/* wct = 14+ */
-+		__u16 TotalParameterCount;
-+		__u16 TotalDataCount;
-+		__u16 MaxParameterCount;
-+		__u16 MaxDataCount;
-+		__u8 MaxSetupCount;
-+		__u8 Reserved;
-+		__u16 Flags;
-+		__u32 Timeout;
-+		__u16 Reserved2;
-+		__u16 ParameterCount;
-+		__u16 ParameterOffset;
-+		__u16 DataCount;
-+		__u16 DataOffset;
-+		__u8 SetupCount;
-+		__u8 Reserved3;
-+		__u16 SubCommand;	/* 1st setup word - can be followed by SetupCount words */
-+		__u16 ByteCount;	/* careful - setupcount is not always one */
-+	} req;
-+	struct {
-+		struct smb_hdr hdr;	/* wct = 0 */
-+		__u16 TotalParameterCount;
-+		__u16 TotalDataCount;
-+		__u16 Reserved;
-+		__u16 ParameterCount;
-+		__u16 ParamterOffset;
-+		__u16 ParameterDisplacement;
-+		__u16 DataCount;
-+		__u16 DataOffset;
-+		__u16 DataDisplacement;
-+		__u8 SetupCount;
-+		__u8 Reserved1;	/* should be zero setup words following */
-+		__u16 ByteCount;
-+		__u16 Reserved2;	/* parameter word reserved - present for infolevels > 100 */
-+		/* data area follows */
-+	} resp;
-+} TRANSACTION2;
-+
-+/* PathInfo/FileInfo infolevels */
-+#define SMB_INFO_STANDARD                   1
-+#define SMB_INFO_QUERY_EAS_FROM_LIST        3
-+#define SMB_INFO_QUERY_ALL_EAS              4
-+#define SMB_INFO_IS_NAME_VALID              6
-+#define SMB_QUERY_FILE_BASIC_INFO       0x101
-+#define SMB_QUERY_FILE_STANDARD_INFO    0x102
-+#define SMB_QUERY_FILE_EA_INFO          0x103
-+#define SMB_QUERY_FILE_NAME_INFO        0x104
-+#define SMB_QUERY_FILE_ALLOCATION_INFO  0x105
-+#define SMB_QUERY_FILE_END_OF_FILEINFO  0x106
-+#define SMB_QUERY_FILE_ALL_INFO         0x107
-+#define SMB_QUERY_ALT_NAME_INFO         0x108
-+#define SMB_QUERY_FILE_STREAM_INFO      0x109
-+#define SMB_QUERY_FILE_COMPRESSION_INFO 0x10B
-+#define SMB_QUERY_FILE_UNIX_BASIC       0x200
-+#define SMB_QUERY_FILE_UNIX_LINK        0x201
-+
-+#define SMB_SET_FILE_BASIC_INFO	        0x101
-+#define SMB_SET_FILE_DISPOSITION_INFO   0x102
-+#define SMB_SET_FILE_ALLOCATION_INFO    0x103
-+#define SMB_SET_FILE_END_OF_FILE_INFO   0x104
-+#define SMB_SET_FILE_UNIX_BASIC         0x200
-+#define SMB_SET_FILE_UNIX_LINK          0x201
-+#define SMB_SET_FILE_UNIX_HLINK         0x203
-+#define SMB_SET_FILE_BASIC_INFO2        0x3ec
-+#define SMB_SET_FILE_RENAME_INFORMATION 0x3f2
-+#define SMB_FILE_ALL_INFO2              0x3fa
-+#define SMB_SET_FILE_ALLOCATION_INFO2   0x3fb
-+#define SMB_SET_FILE_END_OF_FILE_INFO2  0x3fc
-+#define SMB_FILE_MOVE_CLUSTER_INFO      0x407
-+#define SMB_FILE_QUOTA_INFO             0x408
-+#define SMB_FILE_REPARSEPOINT_INFO      0x409
-+#define SMB_FILE_MAXIMUM_INFO           0x40d
-+
-+/* Find File infolevels */
-+#define SMB_FIND_FILE_DIRECTORY_INFO      0x101
-+#define SMB_FIND_FILE_FULL_DIRECTORY_INFO 0x102
-+#define SMB_FIND_FILE_NAMES_INFO          0x103
-+#define SMB_FIND_FILE_BOTH_DIRECTORY_INFO 0x104
-+#define SMB_FIND_FILE_UNIX                0x202
-+
-+typedef struct smb_com_transaction2_qpi_req {
-+	struct smb_hdr hdr;	/* wct = 14+ */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 MaxParameterCount;
-+	__u16 MaxDataCount;
-+	__u8 MaxSetupCount;
-+	__u8 Reserved;
-+	__u16 Flags;
-+	__u32 Timeout;
-+	__u16 Reserved2;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u8 SetupCount;
-+	__u8 Reserved3;
-+	__u16 SubCommand;	/* one setup word */
-+	__u16 ByteCount;
-+	__u8 Pad;
-+	__u16 InformationLevel;
-+	__u32 Reserved4;
-+	char FileName[1];
-+} TRANSACTION2_QPI_REQ;
-+
-+typedef struct smb_com_transaction2_qpi_rsp {
-+	struct smb_hdr hdr;	/* wct = 10 + SetupCount */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 Reserved;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 ParameterDisplacement;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u16 DataDisplacement;
-+	__u8 SetupCount;
-+	__u8 Reserved1;		/* should be zero setup words following */
-+	__u16 ByteCount;
-+	__u16 Reserved2;	/* parameter word reserved - present for infolevels > 100 */
-+} TRANSACTION2_QPI_RSP;
-+
-+typedef struct smb_com_transaction2_spi_req {
-+	struct smb_hdr hdr;	/* wct = 15 */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 MaxParameterCount;
-+	__u16 MaxDataCount;
-+	__u8 MaxSetupCount;
-+	__u8 Reserved;
-+	__u16 Flags;
-+	__u32 Timeout;
-+	__u16 Reserved2;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u8 SetupCount;
-+	__u8 Reserved3;
-+	__u16 SubCommand;	/* one setup word */
-+	__u16 ByteCount;
-+	__u8 Pad;
-+	__u16 Pad1;
-+	__u16 InformationLevel;
-+	__u32 Reserved4;
-+	char FileName[1];
-+} TRANSACTION2_SPI_REQ;
-+
-+typedef struct smb_com_transaction2_spi_rsp {
-+	struct smb_hdr hdr;	/* wct = 10 + SetupCount */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 Reserved;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 ParameterDisplacement;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u16 DataDisplacement;
-+	__u8 SetupCount;
-+	__u8 Reserved1;		/* should be zero setup words following */
-+	__u16 ByteCount;
-+	__u16 Reserved2;	/* parameter word reserved - present for infolevels > 100 */
-+} TRANSACTION2_SPI_RSP;
-+
-+struct set_file_rename {
-+	__u32 overwrite;   /* 1 = overwrite dest */
-+	__u32 root_fid;   /* zero */
-+	__u32 target_name_len;
-+	char  target_name[0];  /* Must be unicode */
-+};
-+
-+struct smb_com_transaction2_sfi_req {
-+	struct smb_hdr hdr;	/* wct = 15 */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 MaxParameterCount;
-+	__u16 MaxDataCount;
-+	__u8 MaxSetupCount;
-+	__u8 Reserved;
-+	__u16 Flags;
-+	__u32 Timeout;
-+	__u16 Reserved2;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u8 SetupCount;
-+	__u8 Reserved3;
-+	__u16 SubCommand;	/* one setup word */
-+	__u16 ByteCount;
-+	__u8 Pad;
-+	__u16 Pad1;
-+	__u16 Fid;
-+	__u16 InformationLevel;
-+	__u16 Reserved4;	
-+};
-+
-+struct smb_com_transaction2_sfi_rsp {
-+	struct smb_hdr hdr;	/* wct = 10 + SetupCount */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 Reserved;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 ParameterDisplacement;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u16 DataDisplacement;
-+	__u8 SetupCount;
-+	__u8 Reserved1;		/* should be zero setup words following */
-+	__u16 ByteCount;
-+	__u16 Reserved2;	/* parameter word reserved - present for infolevels > 100 */
-+};
-+
-+
-+/*
-+ * Flags on T2 FINDFIRST and FINDNEXT 
-+ */
-+#define CIFS_SEARCH_CLOSE_ALWAYS  0x0001
-+#define CIFS_SEARCH_CLOSE_AT_END  0x0002
-+#define CIFS_SEARCH_RETURN_RESUME 0x0004
-+#define CIFS_SEARCH_CONTINUE_FROM_LAST 0x0008
-+#define CIFS_SEARCH_BACKUP_SEARCH 0x0010
-+
-+/*
-+ * Size of the resume key on FINDFIRST and FINDNEXT calls
-+ */
-+#define CIFS_SMB_RESUME_KEY_SIZE 4
-+
-+typedef struct smb_com_transaction2_ffirst_req {
-+	struct smb_hdr hdr;	/* wct = 15 */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 MaxParameterCount;
-+	__u16 MaxDataCount;
-+	__u8 MaxSetupCount;
-+	__u8 Reserved;
-+	__u16 Flags;
-+	__u32 Timeout;
-+	__u16 Reserved2;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u8 SetupCount;	/* one */
-+	__u8 Reserved3;
-+	__u16 SubCommand;	/* TRANS2_FIND_FIRST */
-+	__u16 ByteCount;
-+	__u8 Pad;
-+	__u16 SearchAttributes;
-+	__u16 SearchCount;
-+	__u16 SearchFlags;
-+	__u16 InformationLevel;
-+	__u32 SearchStorageType;
-+	char FileName[1];
-+} TRANSACTION2_FFIRST_REQ;
-+
-+typedef struct smb_com_transaction2_ffirst_rsp {
-+	struct smb_hdr hdr;	/* wct = 10 */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 Reserved;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 ParameterDisplacement;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u16 DataDisplacement;
-+	__u8 SetupCount;
-+	__u8 Reserved1;		/* should be zero setup words following */
-+	__u16 ByteCount;
-+} TRANSACTION2_FFIRST_RSP;
-+
-+typedef struct smb_com_transaction2_ffirst_rsp_parms {
-+	__u16 SearchHandle;
-+	__u16 SearchCount;
-+	__u16 EndofSearch;
-+	__u16 EAErrorOffset;
-+	__u16 LastNameOffset;
-+} T2_FFIRST_RSP_PARMS;
-+
-+typedef struct smb_com_transaction2_fnext_req {
-+	struct smb_hdr hdr;	/* wct = 15 */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 MaxParameterCount;
-+	__u16 MaxDataCount;
-+	__u8 MaxSetupCount;
-+	__u8 Reserved;
-+	__u16 Flags;
-+	__u32 Timeout;
-+	__u16 Reserved2;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u8 SetupCount;	/* one */
-+	__u8 Reserved3;
-+	__u16 SubCommand;	/* TRANS2_FIND_NEXT */
-+	__u16 ByteCount;
-+	__u8 Pad;
-+	__u16 SearchHandle;
-+	__u16 SearchCount;
-+	__u16 InformationLevel;
-+	__u32 ResumeKey;
-+	__u16 SearchFlags;
-+	char ResumeFileName[1];
-+} TRANSACTION2_FNEXT_REQ;
-+
-+typedef struct smb_com_transaction2_fnext_rsp {
-+	struct smb_hdr hdr;	/* wct = 10 */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 Reserved;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 ParameterDisplacement;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u16 DataDisplacement;
-+	__u8 SetupCount;
-+	__u8 Reserved1;		/* should be zero setup words following */
-+	__u16 ByteCount;
-+} TRANSACTION2_FNEXT_RSP;
-+
-+typedef struct smb_com_transaction2_fnext_rsp_parms {
-+	__u16 SearchCount;
-+	__u16 EndofSearch;
-+	__u16 EAErrorOffset;
-+	__u16 LastNameOffset;
-+} T2_FNEXT_RSP_PARMS;
-+
-+/* QFSInfo Levels */
-+#define SMB_INFO_ALLOCATION         1
-+#define SMB_INFO_VOLUME             2
-+#define SMB_QUERY_FS_VOLUME_INFO    0x102
-+#define SMB_QUERY_FS_SIZE_INFO      0x103
-+#define SMB_QUERY_FS_DEVICE_INFO    0x104
-+#define SMB_QUERY_FS_ATTRIBUTE_INFO 0x105
-+#define SMB_QUERY_CIFS_UNIX_INFO    0x200
-+#define SMB_QUERY_LABEL_INFO        0x3ea
-+#define SMB_QUERY_FS_QUOTA_INFO     0x3ee
-+
-+typedef struct smb_com_transaction2_qfsi_req {
-+	struct smb_hdr hdr;	/* wct = 14+ */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 MaxParameterCount;
-+	__u16 MaxDataCount;
-+	__u8 MaxSetupCount;
-+	__u8 Reserved;
-+	__u16 Flags;
-+	__u32 Timeout;
-+	__u16 Reserved2;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u8 SetupCount;
-+	__u8 Reserved3;
-+	__u16 SubCommand;	/* one setup word */
-+	__u16 ByteCount;
-+	__u8 Pad;
-+	__u16 InformationLevel;
-+} TRANSACTION2_QFSI_REQ;
-+
-+typedef struct smb_com_transaction_qfsi_rsp {
-+	struct smb_hdr hdr;	/* wct = 10 + SetupCount */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 Reserved;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 ParameterDisplacement;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u16 DataDisplacement;
-+	__u8 SetupCount;
-+	__u8 Reserved1;		/* should be zero setup words following */
-+	__u16 ByteCount;
-+	__u8 Pad;		/* may be three bytes *//* followed by data area */
-+} TRANSACTION2_QFSI_RSP;
-+
-+typedef struct smb_com_transaction2_get_dfs_refer_req {
-+	struct smb_hdr hdr;	/* wct = 15 */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 MaxParameterCount;
-+	__u16 MaxDataCount;
-+	__u8 MaxSetupCount;
-+	__u8 Reserved;
-+	__u16 Flags;
-+	__u32 Timeout;
-+	__u16 Reserved2;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u8 SetupCount;
-+	__u8 Reserved3;
-+	__u16 SubCommand;	/* one setup word */
-+	__u16 ByteCount;
-+	__u8 Pad[3];		/* Win2K has sent 0x0F01 (max resp length perhaps?) followed by one byte pad - doesn't seem to matter though */
-+	__u16 MaxReferralLevel;
-+	char RequestFileName[1];
-+} TRANSACTION2_GET_DFS_REFER_REQ;
-+
-+typedef struct dfs_referral_level_3 {
-+	__u16 VersionNumber;
-+	__u16 ReferralSize;
-+	__u16 ServerType;	/* 0x0001 = CIFS server */
-+	__u16 ReferralFlags;	/* or proximity - not clear which since always set to zero - SNIA spec says 0x01 means strip off PathConsumed chars before submitting RequestFileName to remote node */
-+	__u16 TimeToLive;
-+	__u16 Proximity;
-+	__u16 DfsPathOffset;
-+	__u16 DfsAlternatePathOffset;
-+	__u16 NetworkAddressOffset;
-+} REFERRAL3;
-+
-+typedef struct smb_com_transaction_get_dfs_refer_rsp {
-+	struct smb_hdr hdr;	/* wct = 10 */
-+	__u16 TotalParameterCount;
-+	__u16 TotalDataCount;
-+	__u16 Reserved;
-+	__u16 ParameterCount;
-+	__u16 ParameterOffset;
-+	__u16 ParameterDisplacement;
-+	__u16 DataCount;
-+	__u16 DataOffset;
-+	__u16 DataDisplacement;
-+	__u8 SetupCount;
-+	__u8 Reserved1;		/* zero setup words following */
-+	__u16 ByteCount;
-+	__u8 Pad;
-+	__u16 PathConsumed;
-+	__u16 NumberOfReferrals;
-+	__u16 DFSFlags;
-+	__u16 Pad2;
-+	REFERRAL3 referrals[1];	/* array of level 3 dfs_referral structures */
-+	/* followed by the strings pointed to by the referral structures */
-+} TRANSACTION2_GET_DFS_REFER_RSP;
-+
-+/* DFS Flags */
-+#define DFSREF_REFERRAL_SERVER  0x0001
-+#define DFSREF_STORAGE_SERVER   0x0002
-+
-+/* IOCTL information */
-+/* List of ioctl function codes that look to be of interest to remote clients like this. */
-+/* Need to do some experimentation to make sure they all work remotely.                  */
-+/* Some of the following such as the encryption/compression ones would be                */
-+/* invoked from tools via a specialized hook into the VFS rather than via the            */
-+/* standard vfs entry points */
-+#define FSCTL_REQUEST_OPLOCK_LEVEL_1 0x00090000
-+#define FSCTL_REQUEST_OPLOCK_LEVEL_2 0x00090004
-+#define FSCTL_REQUEST_BATCH_OPLOCK   0x00090008
-+#define FSCTL_LOCK_VOLUME            0x00090018
-+#define FSCTL_UNLOCK_VOLUME          0x0009001C
-+#define FSCTL_GET_COMPRESSION        0x0009003C
-+#define FSCTL_SET_COMPRESSION        0x0009C040
-+#define FSCTL_REQUEST_FILTER_OPLOCK  0x0009008C
-+#define FSCTL_FILESYS_GET_STATISTICS 0x00090090
-+#define FSCTL_SET_REPARSE_POINT      0x000900A4
-+#define FSCTL_GET_REPARSE_POINT      0x000900A8
-+#define FSCTL_DELETE_REPARSE_POINT   0x000900AC
-+#define FSCTL_SET_SPARSE             0x000900C4
-+#define FSCTL_SET_ZERO_DATA          0x000900C8
-+#define FSCTL_SET_ENCRYPTION         0x000900D7
-+#define FSCTL_ENCRYPTION_FSCTL_IO    0x000900DB
-+#define FSCTL_WRITE_RAW_ENCRYPTED    0x000900DF
-+#define FSCTL_READ_RAW_ENCRYPTED     0x000900E3
-+#define FSCTL_SIS_COPYFILE           0x00090100
-+#define FSCTL_SIS_LINK_FILES         0x0009C104
-+
-+#define IO_REPARSE_TAG_MOUNT_POINT   0xA0000003
-+#define IO_REPARSE_TAG_HSM           0xC0000004
-+#define IO_REPARSE_TAG_SIS           0x80000007
-+
-+/*
-+ ************************************************************************
-+ * All structs for everything above the SMB PDUs themselves
-+ * (such as the T2 level specific data) go here                  
-+ ************************************************************************
-+ */
-+
-+/*
-+ * Information on a server
-+ */
-+
-+struct serverInfo {
-+	char name[16];
-+	unsigned char versionMajor;
-+	unsigned char versionMinor;
-+	unsigned long type;
-+	unsigned int commentOffset;
-+};
-+
-+/*
-+ * The following structure is the format of the data returned on a NetShareEnum
-+ * with level "90" (x5A)
-+ */
-+
-+struct shareInfo {
-+	char shareName[13];
-+	char pad;
-+	unsigned short type;
-+	unsigned int commentOffset;
-+};
-+
-+struct aliasInfo {
-+	char aliasName[9];
-+	char pad;
-+	unsigned int commentOffset;
-+	unsigned char type[2];
-+};
-+
-+struct aliasInfo92 {
-+	int aliasNameOffset;
-+	int serverNameOffset;
-+	int shareNameOffset;
-+};
-+
-+typedef struct {
-+	__u64 TotalAllocationUnits;
-+	__u64 FreeAllocationUnits;
-+	__u32 SectorsPerAllocationUnit;
-+	__u32 BytesPerSector;
-+} FILE_SYSTEM_INFO;		/* size info, level 0x103 */
-+
-+typedef struct {
-+	__u16 MajorVersionNumber;
-+	__u16 MinorVersionNumber;
-+	__u64 Capability;
-+} FILE_SYSTEM_UNIX_INFO;	/* Unix extensions info, level 0x200 */
-+/* Linux/Unix extensions capability flags */
-+#define CIFS_UNIX_FCNTL_CAP             0x00000001 /* support for fcntl locks */
-+#define CIFS_UNIX_POSIX_ACL_CAP         0x00000002
-+
-+/* DeviceType Flags */
-+#define FILE_DEVICE_CD_ROM              0x00000002
-+#define FILE_DEVICE_CD_ROM_FILE_SYSTEM  0x00000003
-+#define FILE_DEVICE_DFS                 0x00000006
-+#define FILE_DEVICE_DISK                0x00000007
-+#define FILE_DEVICE_DISK_FILE_SYSTEM    0x00000008
-+#define FILE_DEVICE_FILE_SYSTEM         0x00000009
-+#define FILE_DEVICE_NAMED_PIPE          0x00000011
-+#define FILE_DEVICE_NETWORK             0x00000012
-+#define FILE_DEVICE_NETWORK_FILE_SYSTEM 0x00000014
-+#define FILE_DEVICE_NULL                0x00000015
-+#define FILE_DEVICE_PARALLEL_PORT       0x00000016
-+#define FILE_DEVICE_PRINTER             0x00000018
-+#define FILE_DEVICE_SERIAL_PORT         0x0000001b
-+#define FILE_DEVICE_STREAMS             0x0000001e
-+#define FILE_DEVICE_TAPE                0x0000001f
-+#define FILE_DEVICE_TAPE_FILE_SYSTEM    0x00000020
-+#define FILE_DEVICE_VIRTUAL_DISK        0x00000024
-+#define FILE_DEVICE_NETWORK_REDIRECTOR  0x00000028
-+
-+typedef struct {
-+	__u32 DeviceType;
-+	__u32 DeviceCharacteristics;
-+} FILE_SYSTEM_DEVICE_INFO;	/* device info, level 0x104 */
-+
-+typedef struct {
-+	__u32 Attributes;
-+	__u32 MaxPathNameComponentLength;
-+	__u32 FileSystemNameLen;
-+	char FileSystemName[52];	/* do not really need to save this - so potentially get only subset of name */
-+} FILE_SYSTEM_ATTRIBUTE_INFO;
-+
-+typedef struct {		/* data block encoding of response to level 263 QPathInfo */
-+	__u64 CreationTime;
-+	__u64 LastAccessTime;
-+	__u64 LastWriteTime;
-+	__u64 ChangeTime;
-+	__u32 Attributes;
-+	__u32 Pad1;
-+	__u64 AllocationSize;
-+	__u64 EndOfFile;	/* size ie offset to first free byte in file */
-+	__u32 NumberOfLinks;	/* hard links */
-+	__u8 DeletePending;
-+	__u8 Directory;
-+	__u16 Pad2;
-+	__u64 IndexNumber;
-+	__u32 EASize;
-+	__u32 AccessFlags;
-+	__u64 IndexNumber1;
-+	__u64 CurrentByteOffset;
-+	__u32 Mode;
-+	__u32 AlignmentRequirement;
-+	__u32 FileNameLength;
-+	char FileName[1];
-+} FILE_ALL_INFO;		/* level 263 QPathInfo */
-+
-+typedef struct {
-+	__u64 EndOfFile;
-+	__u64 NumOfBytes;
-+	__u64 LastStatusChange;	/*SNIA spec says DCE time for the three time fields */
-+	__u64 LastAccessTime;
-+	__u64 LastModificationTime;
-+	__u64 Uid;
-+	__u64 Gid;
-+	__u32 Type;
-+	__u64 DevMajor;
-+	__u64 DevMinor;
-+	__u64 UniqueId;
-+	__u64 Permissions;
-+	__u64 Nlinks;
-+} FILE_UNIX_BASIC_INFO;		/* level 512 QPathInfo */
-+
-+typedef struct {
-+	char LinkDest[1];
-+} FILE_UNIX_LINK_INFO;		/* level 513 QPathInfo */
-+
-+/* defines for enumerating possible values of the Unix type field below */
-+#define UNIX_FILE      0
-+#define UNIX_DIR       1
-+#define UNIX_SYMLINK   2
-+#define UNIX_CHARDEV   3
-+#define UNIX_BLOCKDEV  4
-+#define UNIX_FIFO      5
-+#define UNIX_SOCKET    6
-+
-+typedef struct {
-+	__u32 NextEntryOffset;
-+	__u32 ResumeKey;
-+	__u64 EndOfFile;
-+	__u64 NumOfBytes;
-+	__u64 LastStatusChange;	/*SNIA spec says DCE time for the three time fields */
-+	__u64 LastAccessTime;
-+	__u64 LastModificationTime;
-+	__u64 Uid;
-+	__u64 Gid;
-+	__u32 Type;
-+	__u64 DevMajor;
-+	__u64 DevMinor;
-+	__u64 UniqueId;
-+	__u64 Permissions;
-+	__u64 Nlinks;
-+	char FileName[1];
-+} FILE_UNIX_INFO;
-+
-+typedef struct {
-+	__u64 CreationTime;
-+	__u64 LastAccessTime;
-+	__u64 LastWriteTime;
-+	__u64 ChangeTime;
-+	__u32 Attributes;
-+	__u32 Pad;
-+} FILE_BASIC_INFO;		/* size info, level 0x101 */
-+
-+struct file_allocation_info {
-+	__u64 AllocationSize;
-+};		/* size info, level 0x103 */
-+
-+struct file_end_of_file_info {
-+	__u64 FileSize;		/* offset to end of file */
-+};	/* size info, level 0x104 */
-+
-+typedef struct {
-+	__u32 NextEntryOffset;
-+	__u32 FileIndex;
-+	__u64 CreationTime;
-+	__u64 LastAccessTime;
-+	__u64 LastWriteTime;
-+	__u64 ChangeTime;
-+	__u64 EndOfFile;
-+	__u64 AllocationSize;
-+	__u32 ExtFileAttributes;
-+	__u32 FileNameLength;
-+	char FileName[1];
-+} FILE_DIRECTORY_INFO;   /* level 257 FF response data area */
-+
-+struct gea {
-+	unsigned char cbName;
-+	char szName[1];
-+};
-+
-+struct gealist {
-+	unsigned long cbList;
-+	struct gea list[1];
-+};
-+
-+struct fea {
-+	unsigned char EA_flags;
-+	__u8 name_len;
-+	__u16 value_len;
-+	char szName[1];
-+	/* optionally followed by value */
-+};
-+/* flags for _FEA.fEA */
-+#define FEA_NEEDEA         0x80	/* need EA bit */
-+
-+struct fealist {
-+	__u32 list_len;
-+	struct fea list[1];
-+};
-+
-+/* used to hold an arbitrary blob of data */
-+struct data_blob {
-+	__u8 *data;
-+	size_t length;
-+	void (*free) (struct data_blob * data_blob);
-+};
-+
-+#ifdef CONFIG_CIFS_POSIX
-+/* 
-+	For better POSIX semantics from Linux client, (even better
-+	than the existing CIFS Unix Extensions) we need updated PDUs for:
-+	
-+	1) PosixCreateX - to set and return the mode, inode#, device info and
-+	perhaps add a CreateDevice - to create Pipes and other special .inodes
-+	Also note POSIX open flags
-+	2) Close - to return the last write time to do cache across close more safely
-+	3) PosixQFSInfo - to return statfs info
-+	4) FindFirst return unique inode number - what about resume key, two forms short (matches readdir) and full (enough info to cache inodes)
-+	5) Mkdir - set mode
-+	
-+	And under consideration: 
-+	6) FindClose2 (return nanosecond timestamp ??)
-+	7) Use nanosecond timestamps throughout all time fields if 
-+	   corresponding attribute flag is set
-+	8) sendfile - handle based copy
-+	9) Direct i/o
-+	10) "POSIX ACL" support
-+	11) Misc fcntls?
-+	
-+	what about fixing 64 bit alignment
-+	
-+	There are also various legacy SMB/CIFS requests used as is
-+	
-+	From existing Lanman and NTLM dialects:
-+	--------------------------------------
-+	NEGOTIATE
-+	SESSION_SETUP_ANDX (BB which?)
-+	TREE_CONNECT_ANDX (BB which wct?)
-+	TREE_DISCONNECT (BB add volume timestamp on response)
-+	LOGOFF_ANDX
-+	DELETE (note delete open file behavior)
-+	DELETE_DIRECTORY
-+	READ_AND_X
-+	WRITE_AND_X
-+	LOCKING_AND_X (note posix lock semantics)
-+	RENAME (note rename across dirs and open file rename posix behaviors)
-+	NT_RENAME (for hardlinks) Is this good enough for all features?
-+	FIND_CLOSE2
-+	TRANSACTION2 (18 cases)
-+		SMB_SET_FILE_END_OF_FILE_INFO2 SMB_SET_PATH_END_OF_FILE_INFO2
-+		(BB verify that never need to set allocation size)
-+		SMB_SET_FILE_BASIC_INFO2 (setting times - BB can it be done via Unix ext?)
-+	
-+	COPY (note support for copy across directories) - FUTURE, OPTIONAL
-+	setting/getting OS/2 EAs - FUTURE (BB can this handle
-+	        setting Linux xattrs perfectly)         - OPTIONAL
-+    dnotify                                         - FUTURE, OPTIONAL
-+    quota                                           - FUTURE, OPTIONAL
-+			
-+	Note that various requests implemented for NT interop such as 
-+		NT_TRANSACT (IOCTL) QueryReparseInfo
-+	are unneeded to servers compliant with the CIFS POSIX extensions
-+	
-+	From CIFS Unix Extensions:
-+	-------------------------
-+	T2 SET_PATH_INFO (SMB_SET_FILE_UNIX_LINK) for symlinks
-+	T2 SET_PATH_INFO (SMB_SET_FILE_BASIC_INFO2)
-+	T2 QUERY_PATH_INFO (SMB_QUERY_FILE_UNIX_LINK)
-+	T2 QUERY_PATH_INFO (SMB_QUERY_FILE_UNIX_BASIC) - BB check for missing inode fields
-+					Actually need QUERY_FILE_UNIX_INFO since has inode num
-+					BB what about a) blksize/blkbits/blocks
-+								  b) i_version
-+								  c) i_rdev
-+								  d) notify mask?
-+								  e) generation
-+								  f) size_seqcount
-+	T2 FIND_FIRST/FIND_NEXT FIND_FILE_UNIX
-+	TRANS2_GET_DFS_REFERRAL				  - OPTIONAL but recommended
-+	T2_QFS_INFO QueryDevice/AttributeInfo - OPTIONAL
-+	
-+	
-+ */
-+#endif 
-+
-+#pragma pack()			/* resume default structure packing */
-+
-+#endif				/* _CIFSPDU_H */
-diff -urN linux-2.4.29.old/fs/cifs/cifsproto.h linux-2.4.29/fs/cifs/cifsproto.h
---- linux-2.4.29.old/fs/cifs/cifsproto.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifsproto.h	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,254 @@
-+/*
-+ *   fs/cifs/cifsproto.h
-+ *
-+ *   Copyright (c) International Business Machines  Corp., 2002
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 
-+ */
-+#ifndef _CIFSPROTO_H
-+#define _CIFSPROTO_H
-+#include <linux/nls.h>
-+
-+struct statfs;
-+
-+/*
-+ *****************************************************************
-+ * All Prototypes
-+ *****************************************************************
-+ */
-+
-+extern struct smb_hdr *cifs_buf_get(void);
-+extern void cifs_buf_release(void *);
-+extern int smb_send(struct socket *, struct smb_hdr *,
-+			unsigned int /* length */ , struct sockaddr *);
-+extern unsigned int _GetXid(void);
-+extern void _FreeXid(unsigned int);
-+#define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__FUNCTION__, xid,current->fsuid));
-+#define FreeXid(curr_xid) {_FreeXid(curr_xid); cFYI(1,("CIFS VFS: leaving %s (xid = %d) rc = %d",__FUNCTION__,curr_xid,rc));}
-+extern char *build_path_from_dentry(struct dentry *);
-+extern char *build_wildcard_path_from_dentry(struct dentry *direntry);
-+extern void renew_parental_timestamps(struct dentry *direntry);
-+extern int SendReceive(const unsigned int /* xid */ , struct cifsSesInfo *,
-+			struct smb_hdr * /* input */ ,
-+			struct smb_hdr * /* out */ ,
-+			int * /* bytes returned */ , const int long_op);
-+extern int checkSMBhdr(struct smb_hdr *smb, __u16 mid);
-+extern int checkSMB(struct smb_hdr *smb, __u16 mid, int length);
-+extern int is_valid_oplock_break(struct smb_hdr *smb);
-+extern unsigned int smbCalcSize(struct smb_hdr *ptr);
-+extern int decode_negTokenInit(unsigned char *security_blob, int length,
-+			enum securityEnum *secType);
-+extern int map_smb_to_linux_error(struct smb_hdr *smb);
-+extern void header_assemble(struct smb_hdr *, char /* command */ ,
-+			const struct cifsTconInfo *, int
-+			/* length of fixed section (word count) in two byte units  */
-+			);
-+struct oplock_q_entry * AllocOplockQEntry(struct inode *, u16, struct cifsTconInfo *);
-+void DeleteOplockQEntry(struct oplock_q_entry *);
-+extern time_t cifs_NTtimeToUnix(u64 /* utc nanoseconds since 1601 */ );
-+extern u64 cifs_UnixTimeToNT(time_t);
-+extern int cifs_get_inode_info(struct inode **pinode,
-+			const unsigned char *search_path, 
-+			FILE_ALL_INFO * pfile_info,
-+			struct super_block *sb, int xid);
-+extern int cifs_get_inode_info_unix(struct inode **pinode,
-+			const unsigned char *search_path,
-+			struct super_block *sb,int xid);
-+
-+extern int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, 
-+			struct nls_table * nls_info);
-+extern int CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses);
-+
-+extern int CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
-+			const char *tree, struct cifsTconInfo *tcon,
-+			const struct nls_table *);
-+
-+extern int CIFSFindFirst(const int xid, struct cifsTconInfo *tcon,
-+			const char *searchName,
-+			FILE_DIRECTORY_INFO * findData,
-+			T2_FFIRST_RSP_PARMS * findParms,
-+			const struct nls_table *nls_codepage,
-+			int *pUnicodeFlag,
-+			int *pUnixFlag /* if Unix extensions used */ );
-+extern int CIFSFindNext(const int xid, struct cifsTconInfo *tcon,
-+			FILE_DIRECTORY_INFO * findData,
-+			T2_FNEXT_RSP_PARMS * findParms,
-+			const __u16 searchHandle, char * resume_name,
-+			int name_length, __u32 resume_key,
-+			int *UnicodeFlag, int *pUnixFlag);
-+
-+extern int CIFSFindClose(const int, struct cifsTconInfo *tcon,
-+			const __u16 search_handle);
-+
-+extern int CIFSSMBQPathInfo(const int xid, struct cifsTconInfo *tcon,
-+			const unsigned char *searchName,
-+			FILE_ALL_INFO * findData,
-+			const struct nls_table *nls_codepage);
-+
-+extern int CIFSSMBUnixQPathInfo(const int xid,
-+			struct cifsTconInfo *tcon,
-+			const unsigned char *searchName,
-+			FILE_UNIX_BASIC_INFO * pFindData,
-+			const struct nls_table *nls_codepage);
-+
-+extern int CIFSGetDFSRefer(const int xid, struct cifsSesInfo *ses,
-+			const unsigned char *searchName,
-+			unsigned char **targetUNCs,
-+			unsigned int *number_of_UNC_in_array,
-+			const struct nls_table *nls_codepage);
-+
-+extern int connect_to_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
-+			const char *old_path,
-+			const struct nls_table *nls_codepage);
-+extern int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
-+			const char *old_path, const struct nls_table *nls_codepage, 
-+			unsigned int *pnum_referrals, unsigned char ** preferrals);
-+extern int CIFSSMBQFSInfo(const int xid, struct cifsTconInfo *tcon,
-+			struct statfs *FSData,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBQFSAttributeInfo(const int xid,
-+			struct cifsTconInfo *tcon,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBQFSDeviceInfo(const int xid, struct cifsTconInfo *tcon,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBQFSUnixInfo(const int xid, struct cifsTconInfo *tcon,
-+			const struct nls_table *nls_codepage);
-+
-+extern int CIFSSMBSetTimes(const int xid, struct cifsTconInfo *tcon,
-+			char *fileName, FILE_BASIC_INFO * data,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBSetEOF(const int xid, struct cifsTconInfo *tcon,
-+			char *fileName, __u64 size,int setAllocationSizeFlag,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon,
-+			 __u64 size, __u16 fileHandle,__u32 opener_pid, int AllocSizeFlag);
-+extern int CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *pTcon,
-+			char *full_path, __u64 mode, __u64 uid,
-+			__u64 gid, dev_t dev, const struct nls_table *nls_codepage);
-+
-+extern int CIFSSMBMkDir(const int xid, struct cifsTconInfo *tcon,
-+			const char *newName,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBRmDir(const int xid, struct cifsTconInfo *tcon,
-+			const char *name, const struct nls_table *nls_codepage);
-+
-+extern int CIFSSMBDelFile(const int xid, struct cifsTconInfo *tcon,
-+			const char *name,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBRename(const int xid, struct cifsTconInfo *tcon,
-+			const char *fromName, const char *toName,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBRenameOpenFile(const int xid,struct cifsTconInfo *pTcon,
-+			int netfid, char * target_name, const struct nls_table *nls_codepage);
-+extern int CIFSCreateHardLink(const int xid,
-+			struct cifsTconInfo *tcon,
-+			const char *fromName, const char *toName,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSUnixCreateHardLink(const int xid,
-+			struct cifsTconInfo *tcon,
-+			const char *fromName, const char *toName,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSUnixCreateSymLink(const int xid,
-+			struct cifsTconInfo *tcon,
-+			const char *fromName, const char *toName,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBUnixQuerySymLink(const int xid,
-+			struct cifsTconInfo *tcon,
-+			const unsigned char *searchName,
-+			char *syminfo, const int buflen,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBQueryReparseLinkInfo(const int xid, 
-+			struct cifsTconInfo *tcon,
-+			const unsigned char *searchName,
-+			char *symlinkinfo, const int buflen, __u16 fid,
-+			const struct nls_table *nls_codepage);
-+
-+extern int CIFSSMBOpen(const int xid, struct cifsTconInfo *tcon,
-+			const char *fileName, const int disposition,
-+			const int access_flags, const int omode,
-+			__u16 * netfid, int *pOplock, FILE_ALL_INFO *,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBClose(const int xid, struct cifsTconInfo *tcon,
-+			const int smb_file_id);
-+
-+extern int CIFSSMBRead(const int xid, struct cifsTconInfo *tcon,
-+			const int netfid, unsigned int count,
-+			const __u64 lseek, unsigned int *nbytes, char **buf);
-+extern int CIFSSMBWrite(const int xid, struct cifsTconInfo *tcon,
-+			const int netfid, const unsigned int count,
-+			const __u64 lseek, unsigned int *nbytes,
-+			const char *buf, const int long_op);
-+extern int CIFSSMBLock(const int xid, struct cifsTconInfo *tcon,
-+			const __u16 netfid, const __u64 len,
-+			const __u64 offset, const __u32 numUnlock,
-+			const __u32 numLock, const __u8 lockType,
-+			const int waitFlag);
-+
-+extern int CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon);
-+extern int CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses);
-+
-+extern struct cifsSesInfo *sesInfoAlloc(void);
-+extern void sesInfoFree(struct cifsSesInfo *);
-+extern struct cifsTconInfo *tconInfoAlloc(void);
-+extern void tconInfoFree(struct cifsTconInfo *);
-+
-+extern int cifs_reconnect(struct TCP_Server_Info *server);
-+
-+extern int cifs_sign_smb(struct smb_hdr *, struct cifsSesInfo *,__u32 *);
-+extern int cifs_verify_signature(const struct smb_hdr *, const char * mac_key,
-+	__u32 expected_sequence_number);
-+extern int cifs_calculate_mac_key(char * key,const char * rn,const char * pass);
-+extern void CalcNTLMv2_partial_mac_key(struct cifsSesInfo *, struct nls_table *);
-+extern void CalcNTLMv2_response(const struct cifsSesInfo *,char * );
-+
-+extern int CIFSBuildServerList(int xid, char *serverBufferList,
-+			int recordlength, int *entries,
-+			int *totalEntries, int *topoChangedFlag);
-+extern int CIFSSMBQueryShares(int xid, struct cifsTconInfo *tcon,
-+			struct shareInfo *shareList, int bufferLen,
-+			int *entries, int *totalEntries);
-+extern int CIFSSMBQueryAlias(int xid, struct cifsTconInfo *tcon,
-+			struct aliasInfo *aliasList, int bufferLen,
-+			int *entries, int *totalEntries);
-+extern int CIFSSMBAliasInfo(int xid, struct cifsTconInfo *tcon,
-+			char *aliasName, char *serverName,
-+			char *shareName, char *comment);
-+extern int CIFSSMBGetShareInfo(int xid, struct cifsTconInfo *tcon,
-+			char *share, char *comment);
-+extern int CIFSSMBGetUserPerms(int xid, struct cifsTconInfo *tcon,
-+			char *userName, char *searchName, int *perms);
-+extern int CIFSSMBSync(int xid, struct cifsTconInfo *tcon, int netfid, int pid);
-+
-+extern int CIFSSMBSeek(int xid,
-+			struct cifsTconInfo *tcon,
-+			int netfid,
-+			int pid,
-+			int whence, unsigned long offset, long long *newoffset);
-+
-+extern int CIFSSMBCopy(int xid,
-+			struct cifsTconInfo *source_tcon,
-+			const char *fromName,
-+			const __u16 target_tid,
-+			const char *toName, const int flags,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBNotify(const int xid, struct cifsTconInfo *tcon, 
-+			const int notify_subdirs,const __u16 netfid,__u32 filter,
-+			const struct nls_table *nls_codepage);
-+extern int CIFSSMBQAllEAs(const int xid, struct cifsTconInfo *tcon,
-+		 const unsigned char *searchName,
-+		 char * EAData, size_t size,
-+		 const struct nls_table *nls_codepage);
-+#endif			/* _CIFSPROTO_H */
-diff -urN linux-2.4.29.old/fs/cifs/cifssmb.c linux-2.4.29/fs/cifs/cifssmb.c
---- linux-2.4.29.old/fs/cifs/cifssmb.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifssmb.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,3016 @@
-+/*
-+ *   fs/cifs/cifssmb.c
-+ *
-+ *   Copyright (C) International Business Machines  Corp., 2002,2003
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   Contains the routines for constructing the SMB PDUs themselves
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+ /* SMB/CIFS PDU handling routines here - except for leftovers in connect.c   */
-+ /* These are mostly routines that operate on a pathname, or on a tree id     */
-+ /* (mounted volume), but there are eight handle based routines which must be */
-+ /* treated slightly different for reconnection purposes since we never want  */
-+ /* to reuse a stale file handle and the caller knows the file handle */
-+
-+#include <linux/fs.h>
-+#include <linux/kernel.h>
-+#include <linux/vfs.h>
-+#include <asm/uaccess.h>
-+#include "cifspdu.h"
-+#include "cifsglob.h"
-+#include "cifsproto.h"
-+#include "cifs_unicode.h"
-+#include "cifs_debug.h"
-+
-+#ifdef CONFIG_CIFS_POSIX
-+static struct {
-+	int index;
-+	char *name;
-+} protocols[] = {
-+	{CIFS_PROT, "\2NT LM 0.12"}, 
-+	{CIFS_PROT, "\2POSIX 2"},
-+	{BAD_PROT, "\2"}
-+};
-+#else
-+static struct {
-+	int index;
-+	char *name;
-+} protocols[] = {
-+	{CIFS_PROT, "\2NT LM 0.12"}, 
-+	{BAD_PROT, "\2"}
-+};
-+#endif
-+
-+
-+/* Mark as invalid, all open files on tree connections since they
-+   were closed when session to server was lost */
-+static void mark_open_files_invalid(struct cifsTconInfo * pTcon)
-+{
-+	struct cifsFileInfo *open_file = NULL;
-+	struct list_head * tmp;
-+	struct list_head * tmp1;
-+
-+/* list all files open on tree connection and mark them invalid */
-+	write_lock(&GlobalSMBSeslock);
-+	list_for_each_safe(tmp, tmp1, &pTcon->openFileList) {
-+		open_file = list_entry(tmp,struct cifsFileInfo, tlist);
-+		if(open_file) {
-+			open_file->invalidHandle = TRUE;
-+		}
-+	}
-+	write_unlock(&GlobalSMBSeslock);
-+	/* BB Add call to invalidate_inodes(sb) for all superblocks mounted to this tcon */
-+}
-+
-+static int
-+smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
-+	 void **request_buf /* returned */ ,
-+	 void **response_buf /* returned */ )
-+{
-+	int rc = 0;
-+	int timeout = 10 * HZ;
-+
-+	/* SMBs NegProt, SessSetup, uLogoff do not have tcon yet so
-+	   check for tcp and smb session status done differently
-+	   for those three - in the calling routine */
-+	if(tcon) {
-+		if((tcon->ses) && (tcon->ses->server)){
-+			struct nls_table *nls_codepage;
-+				/* Give Demultiplex thread up to 10 seconds to 
-+					reconnect, should be greater than cifs socket
-+					timeout which is 7 seconds */
-+			while(tcon->ses->server->tcpStatus == CifsNeedReconnect) {
-+				while ((tcon->ses->server->tcpStatus != CifsGood) && (timeout > 0)){
-+					timeout = interruptible_sleep_on_timeout(&tcon->ses->server->response_q,timeout);
-+				}
-+				if(tcon->ses->server->tcpStatus == CifsNeedReconnect) {
-+					/* on "soft" mounts we wait once */
-+					if((tcon->retry == FALSE) || 
-+					   (tcon->ses->status == CifsExiting)) {
-+						cFYI(1,("gave up waiting on reconnect in smb_init"));
-+						return -EHOSTDOWN;
-+					} /* else "hard" mount - keep retrying until 
-+					process is killed or server comes back up */
-+				} else /* TCP session is reestablished now */
-+					break;
-+				 
-+			}
-+			
-+			nls_codepage = load_nls_default();
-+		/* need to prevent multiple threads trying to
-+		simultaneously reconnect the same SMB session */
-+			down(&tcon->ses->sesSem);
-+			if(tcon->ses->status == CifsNeedReconnect)
-+				rc = cifs_setup_session(0, tcon->ses, nls_codepage);
-+			if(!rc && (tcon->tidStatus == CifsNeedReconnect)) {
-+				mark_open_files_invalid(tcon);
-+				rc = CIFSTCon(0, tcon->ses, tcon->treeName, tcon,
-+					nls_codepage);
-+				up(&tcon->ses->sesSem);
-+				if(rc == 0)
-+					atomic_inc(&tconInfoReconnectCount);
-+
-+				cFYI(1, ("reconnect tcon rc = %d", rc));
-+				/* Removed call to reopen open files here - 
-+					it is safer (and faster) to reopen files
-+					one at a time as needed in read and write */
-+
-+				/* Check if handle based operation so we 
-+					know whether we can continue or not without
-+					returning to caller to reset file handle */
-+				switch(smb_command) {
-+					case SMB_COM_READ_ANDX:
-+					case SMB_COM_WRITE_ANDX:
-+					case SMB_COM_CLOSE:
-+					case SMB_COM_FIND_CLOSE2:
-+					case SMB_COM_LOCKING_ANDX: {
-+						unload_nls(nls_codepage);
-+						return -EAGAIN;
-+					}
-+				}
-+			} else {
-+				up(&tcon->ses->sesSem);
-+			}
-+			unload_nls(nls_codepage);
-+
-+		} else {
-+			return -EIO;
-+		}
-+	}
-+	if(rc)
-+		return rc;
-+
-+	*request_buf = cifs_buf_get();
-+	if (*request_buf == 0) {
-+		/* BB should we add a retry in here if not a writepage? */
-+		return -ENOMEM;
-+	}
-+    /* Although the original thought was we needed the response buf for  */
-+    /* potential retries of smb operations it turns out we can determine */
-+    /* from the mid flags when the request buffer can be resent without  */
-+    /* having to use a second distinct buffer for the response */
-+	*response_buf = *request_buf; 
-+
-+	header_assemble((struct smb_hdr *) *request_buf, smb_command, tcon,
-+			wct /*wct */ );
-+
-+#ifdef CONFIG_CIFS_STATS
-+        if(tcon != NULL) {
-+                atomic_inc(&tcon->num_smbs_sent);
-+        }
-+#endif
-+	return rc;
-+}
-+
-+int
-+CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
-+{
-+	NEGOTIATE_REQ *pSMB;
-+	NEGOTIATE_RSP *pSMBr;
-+	int rc = 0;
-+	int bytes_returned;
-+	struct TCP_Server_Info * server;
-+
-+	if(ses->server)
-+		server = ses->server;
-+	else {
-+		rc = -EIO;
-+		return rc;
-+	}
-+	rc = smb_init(SMB_COM_NEGOTIATE, 0, NULL /* no tcon yet */ ,
-+		      (void **) &pSMB, (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->hdr.Flags2 |= SMBFLG2_UNICODE;
-+	if (extended_security)
-+		pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
-+
-+	pSMB->ByteCount = strlen(protocols[0].name) + 1;
-+	strncpy(pSMB->DialectsArray, protocols[0].name, 30);	
-+    /* null guaranteed to be at end of source and target buffers anyway */
-+
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc == 0) {
-+		server->secMode = pSMBr->SecurityMode;	
-+		server->secType = NTLM; /* BB override default for NTLMv2 or krb*/
-+		/* one byte - no need to convert this or EncryptionKeyLen from le,*/
-+		server->maxReq = le16_to_cpu(pSMBr->MaxMpxCount);
-+		/* probably no need to store and check maxvcs */
-+		server->maxBuf =
-+			min(le32_to_cpu(pSMBr->MaxBufferSize),
-+			(__u32) CIFS_MAX_MSGSIZE + MAX_CIFS_HDR_SIZE);
-+		server->maxRw = le32_to_cpu(pSMBr->MaxRawSize);
-+		cFYI(0, ("Max buf = %d ", ses->server->maxBuf));
-+		GETU32(ses->server->sessid) = le32_to_cpu(pSMBr->SessionKey);
-+		server->capabilities = le32_to_cpu(pSMBr->Capabilities);
-+		server->timeZone = le16_to_cpu(pSMBr->ServerTimeZone);	
-+        /* BB with UTC do we ever need to be using srvr timezone? */
-+		if (pSMBr->EncryptionKeyLength == CIFS_CRYPTO_KEY_SIZE) {
-+			memcpy(server->cryptKey, pSMBr->u.EncryptionKey,
-+			       CIFS_CRYPTO_KEY_SIZE);
-+		} else if ((pSMBr->hdr.Flags2 & SMBFLG2_EXT_SEC)
-+			   && (pSMBr->EncryptionKeyLength == 0)) {
-+			/* decode security blob */
-+		} else
-+			rc = -EIO;
-+
-+		/* BB might be helpful to save off the domain of server here */
-+
-+		if (pSMBr->hdr.Flags2 & SMBFLG2_EXT_SEC) {
-+			if (pSMBr->ByteCount < 16)
-+				rc = -EIO;
-+			else if (pSMBr->ByteCount == 16) {
-+				server->secType = RawNTLMSSP;
-+				if (server->socketUseCount.counter > 1) {
-+					if (memcmp
-+						(server->server_GUID,
-+						pSMBr->u.extended_response.
-+						GUID, 16) != 0) {
-+						cFYI(1,
-+							("UID of server does not match previous connection to same ip address"));
-+						memcpy(server->
-+							server_GUID,
-+							pSMBr->u.
-+							extended_response.
-+							GUID, 16);
-+					}
-+				} else
-+					memcpy(server->server_GUID,
-+					       pSMBr->u.extended_response.
-+					       GUID, 16);
-+			} else {
-+				rc = decode_negTokenInit(pSMBr->u.
-+							 extended_response.
-+							 SecurityBlob,
-+							 pSMBr->ByteCount -
-+							 16, &server->secType);
-+			}
-+		} else
-+			server->capabilities &= ~CAP_EXTENDED_SECURITY;
-+		if(sign_CIFS_PDUs == FALSE) {        
-+			if(server->secMode & SECMODE_SIGN_REQUIRED)
-+				cERROR(1,
-+				 ("Server requires /proc/fs/cifs/PacketSigningEnabled"));
-+			server->secMode &= ~(SECMODE_SIGN_ENABLED | SECMODE_SIGN_REQUIRED);
-+		} else if(sign_CIFS_PDUs == 1) {
-+			if((server->secMode & SECMODE_SIGN_REQUIRED) == 0)
-+				server->secMode &= ~(SECMODE_SIGN_ENABLED | SECMODE_SIGN_REQUIRED);
-+		}
-+				
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	return rc;
-+}
-+
-+int
-+CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon)
-+{
-+	struct smb_hdr *smb_buffer;
-+	struct smb_hdr *smb_buffer_response;
-+	int rc = 0;
-+	int length;
-+
-+	cFYI(1, ("In tree disconnect"));
-+	/*
-+	 *  If last user of the connection and
-+	 *  connection alive - disconnect it
-+	 *  If this is the last connection on the server session disconnect it
-+	 *  (and inside session disconnect we should check if tcp socket needs 
-+	 *  to be freed and kernel thread woken up).
-+	 */
-+	if (tcon)
-+		down(&tcon->tconSem);
-+	else
-+		return -EIO;
-+
-+	atomic_dec(&tcon->useCount);
-+	if (atomic_read(&tcon->useCount) > 0) {
-+		up(&tcon->tconSem);
-+		return -EBUSY;
-+	}
-+
-+	/* No need to return error on this operation if tid invalidated and 
-+	closed on server already e.g. due to tcp session crashing */
-+	if(tcon->tidStatus == CifsNeedReconnect) {
-+		up(&tcon->tconSem);
-+		return 0;  
-+	}
-+
-+	if((tcon->ses == 0) || (tcon->ses->server == 0)) {    
-+		up(&tcon->tconSem);
-+		return -EIO;
-+	}
-+
-+	rc = smb_init(SMB_COM_TREE_DISCONNECT, 0, tcon,
-+		      (void **) &smb_buffer, (void **) &smb_buffer_response);
-+	if (rc) {
-+		up(&tcon->tconSem);
-+		return rc;
-+	}
-+	rc = SendReceive(xid, tcon->ses, smb_buffer, smb_buffer_response,
-+			 &length, 0);
-+	if (rc)
-+		cFYI(1, (" Tree disconnect failed %d", rc));
-+
-+	if (smb_buffer)
-+		cifs_buf_release(smb_buffer);
-+	up(&tcon->tconSem);
-+
-+	/* No need to return error on this operation if tid invalidated and 
-+	closed on server already e.g. due to tcp session crashing */
-+	if (rc == -EAGAIN)
-+		rc = 0;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses)
-+{
-+	struct smb_hdr *smb_buffer_response;
-+	LOGOFF_ANDX_REQ *pSMB;
-+	int rc = 0;
-+	int length;
-+
-+	cFYI(1, ("In SMBLogoff for session disconnect"));
-+	if (ses)
-+		down(&ses->sesSem);
-+	else
-+		return -EIO;
-+
-+	atomic_dec(&ses->inUse);
-+	if (atomic_read(&ses->inUse) > 0) {
-+		up(&ses->sesSem);
-+		return -EBUSY;
-+	}
-+
-+	rc = smb_init(SMB_COM_LOGOFF_ANDX, 2, NULL /* no tcon anymore */,
-+		 (void **) &pSMB, (void **) &smb_buffer_response);
-+
-+	if(ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-+		pSMB->hdr.Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-+
-+	if (rc) {
-+		up(&ses->sesSem);
-+		return rc;
-+	}
-+
-+	pSMB->hdr.Uid = ses->Suid;
-+
-+	pSMB->AndXCommand = 0xFF;
-+	rc = SendReceive(xid, ses, (struct smb_hdr *) pSMB,
-+			 smb_buffer_response, &length, 0);
-+	if (ses->server) {
-+		atomic_dec(&ses->server->socketUseCount);
-+		if (atomic_read(&ses->server->socketUseCount) == 0) {
-+			spin_lock(&GlobalMid_Lock);
-+			ses->server->tcpStatus = CifsExiting;
-+			spin_unlock(&GlobalMid_Lock);
-+			rc = -ESHUTDOWN;
-+		}
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	up(&ses->sesSem);
-+
-+	/* if session dead then we do not need to do ulogoff,
-+		since server closed smb session, no sense reporting 
-+		error */
-+	if (rc == -EAGAIN)
-+		rc = 0;
-+	return rc;
-+}
-+
-+int
-+CIFSSMBDelFile(const int xid, struct cifsTconInfo *tcon,
-+	       const char *fileName, const struct nls_table *nls_codepage)
-+{
-+	DELETE_FILE_REQ *pSMB = NULL;
-+	DELETE_FILE_RSP *pSMBr = NULL;
-+	int rc = 0;
-+	int bytes_returned;
-+	int name_len;
-+
-+DelFileRetry:
-+	rc = smb_init(SMB_COM_DELETE, 1, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->fileName, fileName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(fileName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->fileName, fileName, name_len);
-+	}
-+	pSMB->SearchAttributes =
-+	    cpu_to_le16(ATTR_READONLY | ATTR_HIDDEN | ATTR_SYSTEM);
-+	pSMB->ByteCount = name_len + 1;
-+	pSMB->BufferFormat = 0x04;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Error in RMFile = %d", rc));
-+	} 
-+#ifdef CONFIG_CIFS_STATS
-+        else {
-+		atomic_inc(&tcon->num_deletes);
-+        }
-+#endif
-+
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	if (rc == -EAGAIN)
-+		goto DelFileRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBRmDir(const int xid, struct cifsTconInfo *tcon,
-+	     const char *dirName, const struct nls_table *nls_codepage)
-+{
-+	DELETE_DIRECTORY_REQ *pSMB = NULL;
-+	DELETE_DIRECTORY_RSP *pSMBr = NULL;
-+	int rc = 0;
-+	int bytes_returned;
-+	int name_len;
-+
-+	cFYI(1, ("In CIFSSMBRmDir"));
-+RmDirRetry:
-+	rc = smb_init(SMB_COM_DELETE_DIRECTORY, 0, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len = cifs_strtoUCS((wchar_t *) pSMB->DirName, dirName, 530
-+				/* find define for this maxpathcomponent */
-+				, nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(dirName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->DirName, dirName, name_len);
-+	}
-+
-+	pSMB->ByteCount = name_len + 1;
-+	pSMB->BufferFormat = 0x04;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Error in RMDir = %d", rc));
-+	}
-+#ifdef CONFIG_CIFS_STATS
-+        else {
-+		atomic_inc(&tcon->num_rmdirs);
-+        }
-+#endif
-+
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	if (rc == -EAGAIN)
-+		goto RmDirRetry;
-+	return rc;
-+}
-+
-+int
-+CIFSSMBMkDir(const int xid, struct cifsTconInfo *tcon,
-+	     const char *name, const struct nls_table *nls_codepage)
-+{
-+	int rc = 0;
-+	CREATE_DIRECTORY_REQ *pSMB = NULL;
-+	CREATE_DIRECTORY_RSP *pSMBr = NULL;
-+	int bytes_returned;
-+	int name_len;
-+
-+	cFYI(1, ("In CIFSSMBMkDir"));
-+MkDirRetry:
-+	rc = smb_init(SMB_COM_CREATE_DIRECTORY, 0, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len = cifs_strtoUCS((wchar_t *) pSMB->DirName, name, 530
-+					 /* find define for this maxpathcomponent */
-+					 , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(name, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->DirName, name, name_len);
-+	}
-+
-+	pSMB->ByteCount = name_len + 1 /* for buf format */ ;
-+	pSMB->BufferFormat = 0x04;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Error in Mkdir = %d", rc));
-+	}
-+#ifdef CONFIG_CIFS_STATS
-+        else {
-+		atomic_inc(&tcon->num_mkdirs);
-+        }
-+#endif
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	if (rc == -EAGAIN)
-+		goto MkDirRetry;
-+	return rc;
-+}
-+
-+int
-+CIFSSMBOpen(const int xid, struct cifsTconInfo *tcon,
-+	    const char *fileName, const int openDisposition,
-+	    const int access_flags, const int create_options, __u16 * netfid,
-+	    int *pOplock, FILE_ALL_INFO * pfile_info, 
-+	    const struct nls_table *nls_codepage)
-+{
-+	int rc = -EACCES;
-+	OPEN_REQ *pSMB = NULL;
-+	OPEN_RSP *pSMBr = NULL;
-+	int bytes_returned;
-+	int name_len;
-+
-+openRetry:
-+	rc = smb_init(SMB_COM_NT_CREATE_ANDX, 24, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->AndXCommand = 0xFF;	/* none */
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		pSMB->ByteCount = 1;	/* account for one byte pad to word boundary */
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) (pSMB->fileName + 1),
-+				  fileName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+		pSMB->NameLength = cpu_to_le16(name_len);
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		pSMB->ByteCount = 0;	/* no pad */
-+		name_len = strnlen(fileName, 530);
-+		name_len++;	/* trailing null */
-+		pSMB->NameLength = cpu_to_le16(name_len);
-+		strncpy(pSMB->fileName, fileName, name_len);
-+	}
-+	if (*pOplock & REQ_OPLOCK)
-+		pSMB->OpenFlags = cpu_to_le32(REQ_OPLOCK);
-+	else if (*pOplock & REQ_BATCHOPLOCK) {
-+		pSMB->OpenFlags = cpu_to_le32(REQ_BATCHOPLOCK);
-+	}
-+	pSMB->DesiredAccess = cpu_to_le32(access_flags);
-+	pSMB->AllocationSize = 0;
-+	pSMB->FileAttributes = ATTR_NORMAL;
-+	/* XP does not handle ATTR_POSIX_SEMANTICS */
-+	/* but it helps speed up case sensitive checks for other
-+	servers such as Samba */
-+	if (tcon->ses->capabilities & CAP_UNIX)
-+		pSMB->FileAttributes |= ATTR_POSIX_SEMANTICS;
-+
-+	/* if ((omode & S_IWUGO) == 0)
-+		pSMB->FileAttributes |= ATTR_READONLY;*/
-+	/*  Above line causes problems due to vfs splitting create into two
-+		pieces - need to set mode after file created not while it is
-+		being created */
-+	pSMB->FileAttributes = cpu_to_le32(pSMB->FileAttributes);
-+	pSMB->ShareAccess = cpu_to_le32(FILE_SHARE_ALL);
-+	pSMB->CreateDisposition = cpu_to_le32(openDisposition);
-+	pSMB->CreateOptions = cpu_to_le32(create_options);
-+	pSMB->ImpersonationLevel = cpu_to_le32(SECURITY_IMPERSONATION);	/* BB ??*/
-+	pSMB->SecurityFlags =
-+	    cpu_to_le32(SECURITY_CONTEXT_TRACKING | SECURITY_EFFECTIVE_ONLY);
-+
-+	pSMB->ByteCount += name_len;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+	/* long_op set to 1 to allow for oplock break timeouts */
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 1);
-+	if (rc) {
-+		cFYI(1, ("Error in Open = %d", rc));
-+	} else {
-+		*pOplock = pSMBr->OplockLevel;	/* one byte no need to le_to_cpu */
-+		*netfid = pSMBr->Fid;	/* cifs fid stays in le */
-+		/* Let caller know file was created so we can set the mode. */
-+		/* Do we care about the CreateAction in any other cases? */
-+		if(cpu_to_le32(FILE_CREATE) == pSMBr->CreateAction)
-+			*pOplock |= CIFS_CREATE_ACTION; 
-+		if(pfile_info) {
-+		    memcpy((char *)pfile_info,(char *)&pSMBr->CreationTime,
-+			36 /* CreationTime to Attributes */);
-+		    /* the file_info buf is endian converted by caller */
-+		    pfile_info->AllocationSize = pSMBr->AllocationSize;
-+		    pfile_info->EndOfFile = pSMBr->EndOfFile;
-+		    pfile_info->NumberOfLinks = cpu_to_le32(1);
-+		}
-+
-+#ifdef CONFIG_CIFS_STATS
-+		atomic_inc(&tcon->num_opens);
-+#endif
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	if (rc == -EAGAIN)
-+		goto openRetry;
-+	return rc;
-+}
-+
-+/* If no buffer passed in, then caller wants to do the copy
-+	as in the case of readpages so the SMB buffer must be
-+	freed by the caller */
-+
-+int
-+CIFSSMBRead(const int xid, struct cifsTconInfo *tcon,
-+	    const int netfid, const unsigned int count,
-+	    const __u64 lseek, unsigned int *nbytes, char **buf)
-+{
-+	int rc = -EACCES;
-+	READ_REQ *pSMB = NULL;
-+	READ_RSP *pSMBr = NULL;
-+	char *pReadData = NULL;
-+	int bytes_returned;
-+
-+	*nbytes = 0;
-+	rc = smb_init(SMB_COM_READ_ANDX, 12, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	/* tcon and ses pointer are checked in smb_init */
-+	if (tcon->ses->server == NULL)
-+		return -ECONNABORTED;
-+
-+	pSMB->AndXCommand = 0xFF;	/* none */
-+	pSMB->Fid = netfid;
-+	pSMB->OffsetLow = cpu_to_le32(lseek & 0xFFFFFFFF);
-+	pSMB->OffsetHigh = cpu_to_le32(lseek >> 32);
-+	pSMB->Remaining = 0;
-+	pSMB->MaxCount = cpu_to_le16(count);
-+	pSMB->MaxCountHigh = 0;
-+	pSMB->ByteCount = 0;  /* no need to do le conversion since it is 0 */
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cERROR(1, ("Send error in read = %d", rc));
-+	} else {
-+		pSMBr->DataLength = le16_to_cpu(pSMBr->DataLength);
-+		*nbytes = pSMBr->DataLength;
-+		/*check that DataLength would not go beyond end of SMB */
-+		if ((pSMBr->DataLength > CIFS_MAX_MSGSIZE) 
-+				|| (pSMBr->DataLength > count)) {
-+			cFYI(1,("bad length %d for count %d",pSMBr->DataLength,count));
-+			rc = -EIO;
-+			*nbytes = 0;
-+		} else {
-+			pReadData =
-+			    (char *) (&pSMBr->hdr.Protocol) +
-+			    le16_to_cpu(pSMBr->DataOffset);
-+/*			if(rc = copy_to_user(buf, pReadData, pSMBr->DataLength)) {
-+				cERROR(1,("Faulting on read rc = %d",rc));
-+				rc = -EFAULT;
-+			}*/ /* can not use copy_to_user when using page cache*/
-+			if(*buf)
-+			    memcpy(*buf,pReadData,pSMBr->DataLength);
-+		}
-+	}
-+	if (pSMB) {
-+		if(*buf)
-+			cifs_buf_release(pSMB);
-+		else
-+			*buf = (char *)pSMB;
-+	}
-+
-+	/* Note: On -EAGAIN error only caller can retry on handle based calls 
-+		since file handle passed in no longer valid */
-+	return rc;
-+}
-+
-+int
-+CIFSSMBWrite(const int xid, struct cifsTconInfo *tcon,
-+	     const int netfid, const unsigned int count,
-+	     const __u64 offset, unsigned int *nbytes, const char *buf,
-+	     const int long_op)
-+{
-+	int rc = -EACCES;
-+	WRITE_REQ *pSMB = NULL;
-+	WRITE_RSP *pSMBr = NULL;
-+	int bytes_returned;
-+
-+	rc = smb_init(SMB_COM_WRITE_ANDX, 14, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+	/* tcon and ses pointer are checked in smb_init */
-+	if (tcon->ses->server == NULL)
-+		return -ECONNABORTED;
-+
-+	pSMB->AndXCommand = 0xFF;	/* none */
-+	pSMB->Fid = netfid;
-+	pSMB->OffsetLow = cpu_to_le32(offset & 0xFFFFFFFF);
-+	pSMB->OffsetHigh = cpu_to_le32(offset >> 32);
-+	pSMB->Remaining = 0;
-+	if (count > ((tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFF00))
-+		pSMB->DataLengthLow =
-+		    (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFF00;
-+	else
-+		pSMB->DataLengthLow = count;
-+	pSMB->DataLengthHigh = 0;
-+	pSMB->DataOffset =
-+	    cpu_to_le16(offsetof(struct smb_com_write_req,Data) - 4);
-+
-+	memcpy(pSMB->Data,buf,pSMB->DataLengthLow);
-+
-+	pSMB->ByteCount += pSMB->DataLengthLow + 1 /* pad */ ;
-+	pSMB->DataLengthLow = cpu_to_le16(pSMB->DataLengthLow);
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, long_op);
-+	if (rc) {
-+		cFYI(1, ("Send error in write = %d", rc));
-+		*nbytes = 0;
-+	} else
-+		*nbytes = le16_to_cpu(pSMBr->Count);
-+
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	/* Note: On -EAGAIN error only caller can retry on handle based calls 
-+		since file handle passed in no longer valid */
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBLock(const int xid, struct cifsTconInfo *tcon,
-+	    const __u16 smb_file_id, const __u64 len,
-+	    const __u64 offset, const __u32 numUnlock,
-+	    const __u32 numLock, const __u8 lockType, const int waitFlag)
-+{
-+	int rc = 0;
-+	LOCK_REQ *pSMB = NULL;
-+	LOCK_RSP *pSMBr = NULL;
-+	int bytes_returned;
-+	int timeout = 0;
-+	__u64 temp;
-+
-+	cFYI(1, ("In CIFSSMBLock - timeout %d numLock %d",waitFlag,numLock));
-+	rc = smb_init(SMB_COM_LOCKING_ANDX, 8, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if(lockType == LOCKING_ANDX_OPLOCK_RELEASE) {
-+		timeout = -1; /* no response expected */
-+		pSMB->Timeout = 0;
-+	} else if (waitFlag == TRUE) {
-+		timeout = 3;  /* blocking operation, no timeout */
-+		pSMB->Timeout = -1; /* blocking - do not time out */
-+	} else {
-+		pSMB->Timeout = 0;
-+	}
-+
-+	pSMB->NumberOfLocks = cpu_to_le32(numLock);
-+	pSMB->NumberOfUnlocks = cpu_to_le32(numUnlock);
-+	pSMB->LockType = lockType;
-+	pSMB->AndXCommand = 0xFF;	/* none */
-+	pSMB->Fid = smb_file_id; /* netfid stays le */
-+
-+	if(numLock != 0) {
-+		pSMB->Locks[0].Pid = cpu_to_le16(current->tgid);
-+		/* BB where to store pid high? */
-+		temp = cpu_to_le64(len);
-+		pSMB->Locks[0].LengthLow = (__u32)(temp & 0xFFFFFFFF);
-+		pSMB->Locks[0].LengthHigh =  (__u32)(temp>>32);
-+		temp = cpu_to_le64(offset);
-+		pSMB->Locks[0].OffsetLow = (__u32)(temp & 0xFFFFFFFF);
-+		pSMB->Locks[0].OffsetHigh = (__u32)(temp>>32);
-+		pSMB->ByteCount = sizeof (LOCKING_ANDX_RANGE);
-+	} else {
-+		/* oplock break */
-+		pSMB->ByteCount = 0;
-+	}
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, timeout);
-+
-+	if (rc) {
-+		cFYI(1, ("Send error in Lock = %d", rc));
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	/* Note: On -EAGAIN error only caller can retry on handle based calls 
-+	since file handle passed in no longer valid */
-+	return rc;
-+}
-+
-+int
-+CIFSSMBClose(const int xid, struct cifsTconInfo *tcon, int smb_file_id)
-+{
-+	int rc = 0;
-+	CLOSE_REQ *pSMB = NULL;
-+	CLOSE_RSP *pSMBr = NULL;
-+	int bytes_returned;
-+	cFYI(1, ("In CIFSSMBClose"));
-+
-+/* do not retry on dead session on close */
-+	rc = smb_init(SMB_COM_CLOSE, 3, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if(rc == -EAGAIN)
-+		return 0;
-+	if (rc)
-+		return rc;
-+
-+	pSMB->FileID = (__u16) smb_file_id;
-+	pSMB->LastWriteTime = 0;
-+	pSMB->ByteCount = 0;
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		if(rc!=-EINTR) {
-+			/* EINTR is expected when user ctl-c to kill app */
-+			cERROR(1, ("Send error in Close = %d", rc));
-+		}
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	/* Since session is dead, file will be closed on server already */
-+	if(rc == -EAGAIN)
-+		rc = 0;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBRename(const int xid, struct cifsTconInfo *tcon,
-+	      const char *fromName, const char *toName,
-+	      const struct nls_table *nls_codepage)
-+{
-+	int rc = 0;
-+	RENAME_REQ *pSMB = NULL;
-+	RENAME_RSP *pSMBr = NULL;
-+	int bytes_returned;
-+	int name_len, name_len2;
-+
-+	cFYI(1, ("In CIFSSMBRename"));
-+renameRetry:
-+	rc = smb_init(SMB_COM_RENAME, 1, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->BufferFormat = 0x04;
-+	pSMB->SearchAttributes =
-+	    cpu_to_le16(ATTR_READONLY | ATTR_HIDDEN | ATTR_SYSTEM |
-+			ATTR_DIRECTORY);
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->OldFileName, fromName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+		pSMB->OldFileName[name_len] = 0x04;	/* pad */
-+	/* protocol requires ASCII signature byte on Unicode string */
-+		pSMB->OldFileName[name_len + 1] = 0x00;
-+		name_len2 =
-+		    cifs_strtoUCS((wchar_t *) & pSMB->
-+				  OldFileName[name_len + 2], toName, 530,
-+				  nls_codepage);
-+		name_len2 += 1 /* trailing null */  + 1 /* Signature word */ ;
-+		name_len2 *= 2;	/* convert to bytes */
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(fromName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->OldFileName, fromName, name_len);
-+		name_len2 = strnlen(toName, 530);
-+		name_len2++;	/* trailing null */
-+		pSMB->OldFileName[name_len] = 0x04;  /* 2nd buffer format */
-+		strncpy(&pSMB->OldFileName[name_len + 1], toName, name_len2);
-+		name_len2++;	/* trailing null */
-+		name_len2++;	/* signature byte */
-+	}
-+
-+	pSMB->ByteCount = 1 /* 1st signature byte */  + name_len + name_len2;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Send error in rename = %d", rc));
-+	} 
-+
-+#ifdef CONFIG_CIFS_STATS
-+	  else {
-+		atomic_inc(&tcon->num_renames);
-+	}
-+#endif
-+
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	if (rc == -EAGAIN)
-+		goto renameRetry;
-+
-+	return rc;
-+}
-+
-+int CIFSSMBRenameOpenFile(const int xid,struct cifsTconInfo *pTcon, 
-+		int netfid, char * target_name, const struct nls_table * nls_codepage) 
-+{
-+	struct smb_com_transaction2_sfi_req *pSMB  = NULL;
-+	struct smb_com_transaction2_sfi_rsp *pSMBr = NULL;
-+	struct set_file_rename * rename_info;
-+	char *data_offset;
-+	char dummy_string[30];
-+	int rc = 0;
-+	int bytes_returned = 0;
-+	int len_of_str;
-+
-+	cFYI(1, ("Rename to File by handle"));
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, pTcon, (void **) &pSMB,
-+			(void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->ParameterCount = 6;
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = offsetof(struct smb_com_transaction2_sfi_req,
-+				Fid) - 4;
-+	pSMB->DataOffset = pSMB->ParameterOffset + pSMB->ParameterCount;
-+
-+	data_offset = (char *) (&pSMB->hdr.Protocol) + pSMB->DataOffset;
-+	rename_info = (struct set_file_rename *) data_offset;
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB PDU from sess */
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
-+	pSMB->ByteCount = 3 /* pad */  + pSMB->ParameterCount;
-+	pSMB->ParameterCount = cpu_to_le16(pSMB->ParameterCount);
-+	pSMB->TotalParameterCount = pSMB->ParameterCount;
-+	pSMB->ParameterOffset = cpu_to_le16(pSMB->ParameterOffset);
-+	pSMB->DataOffset = cpu_to_le16(pSMB->DataOffset);
-+	/* construct random name ".cifs_tmp<inodenum><mid>" */
-+	rename_info->overwrite = cpu_to_le32(1);
-+	rename_info->root_fid  = 0;
-+	/* unicode only call */
-+	if(target_name == NULL) {
-+		sprintf(dummy_string,"cifs%x",pSMB->hdr.Mid);
-+	        len_of_str = cifs_strtoUCS((wchar_t *) rename_info->target_name, dummy_string, 24, nls_codepage);
-+	} else {
-+		len_of_str = cifs_strtoUCS((wchar_t *) rename_info->target_name, target_name, 530, nls_codepage);
-+	}
-+	rename_info->target_name_len = cpu_to_le32(2 * len_of_str);
-+	pSMB->DataCount = 12 /* sizeof(struct set_file_rename) */ + (2 * len_of_str) + 2;
-+	pSMB->ByteCount += pSMB->DataCount;
-+	pSMB->DataCount = cpu_to_le16(pSMB->DataCount);
-+	pSMB->TotalDataCount = pSMB->DataCount;
-+	pSMB->Fid = netfid;
-+	pSMB->InformationLevel =
-+		cpu_to_le16(SMB_SET_FILE_RENAME_INFORMATION);
-+	pSMB->Reserved4 = 0;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+	rc = SendReceive(xid, pTcon->ses, (struct smb_hdr *) pSMB,
-+                         (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1,("Send error in Rename (by file handle) = %d", rc));
-+	}
-+#ifdef CONFIG_CIFS_STATS
-+	  else {
-+		atomic_inc(&pTcon->num_t2renames);
-+	}
-+#endif
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	/* Note: On -EAGAIN error only caller can retry on handle based calls
-+		since file handle passed in no longer valid */
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBCopy(const int xid, struct cifsTconInfo *tcon, const char * fromName, 
-+            const __u16 target_tid, const char *toName, const int flags,
-+            const struct nls_table *nls_codepage)
-+{
-+	int rc = 0;
-+	COPY_REQ *pSMB = NULL;
-+	COPY_RSP *pSMBr = NULL;
-+	int bytes_returned;
-+	int name_len, name_len2;
-+
-+	cFYI(1, ("In CIFSSMBCopy"));
-+copyRetry:
-+	rc = smb_init(SMB_COM_COPY, 1, tcon, (void **) &pSMB,
-+			(void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->BufferFormat = 0x04;
-+	pSMB->Tid2 = target_tid;
-+
-+	if(flags & COPY_TREE)
-+		pSMB->Flags |= COPY_TREE;
-+	pSMB->Flags = cpu_to_le16(pSMB->Flags);
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len = cifs_strtoUCS((wchar_t *) pSMB->OldFileName, 
-+				fromName, 
-+				530 /* find define for this maxpathcomponent */,
-+				nls_codepage);
-+		name_len++;     /* trailing null */
-+		name_len *= 2;
-+		pSMB->OldFileName[name_len] = 0x04;     /* pad */
-+		/* protocol requires ASCII signature byte on Unicode string */
-+		pSMB->OldFileName[name_len + 1] = 0x00;
-+		name_len2 = cifs_strtoUCS((wchar_t *) & pSMB->
-+				OldFileName[name_len + 2], toName, 530,
-+				nls_codepage);
-+		name_len2 += 1 /* trailing null */  + 1 /* Signature word */ ;
-+		name_len2 *= 2; /* convert to bytes */
-+	} else {                /* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(fromName, 530);
-+		name_len++;     /* trailing null */
-+		strncpy(pSMB->OldFileName, fromName, name_len);
-+		name_len2 = strnlen(toName, 530);
-+		name_len2++;    /* trailing null */
-+		pSMB->OldFileName[name_len] = 0x04;  /* 2nd buffer format */
-+		strncpy(&pSMB->OldFileName[name_len + 1], toName, name_len2);
-+		name_len2++;    /* trailing null */
-+		name_len2++;    /* signature byte */
-+	}
-+
-+	pSMB->ByteCount = 1 /* 1st signature byte */  + name_len + name_len2;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+		(struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Send error in copy = %d with %d files copied",
-+			rc, pSMBr->CopyCount));
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	if (rc == -EAGAIN)
-+		goto copyRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSUnixCreateSymLink(const int xid, struct cifsTconInfo *tcon,
-+		      const char *fromName, const char *toName,
-+		      const struct nls_table *nls_codepage)
-+{
-+	TRANSACTION2_SPI_REQ *pSMB = NULL;
-+	TRANSACTION2_SPI_RSP *pSMBr = NULL;
-+	char *data_offset;
-+	int name_len;
-+	int name_len_target;
-+	int rc = 0;
-+	int bytes_returned = 0;
-+
-+	cFYI(1, ("In Symlink Unix style"));
-+createSymLinkRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->FileName, fromName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(fromName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->FileName, fromName, name_len);
-+	}
-+	pSMB->ParameterCount = 6 + name_len;
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = offsetof(struct smb_com_transaction2_spi_req,
-+                                     InformationLevel) - 4;
-+	pSMB->DataOffset = pSMB->ParameterOffset + pSMB->ParameterCount;
-+
-+	data_offset = (char *) (&pSMB->hdr.Protocol) + pSMB->DataOffset;
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len_target =
-+		    cifs_strtoUCS((wchar_t *) data_offset, toName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len_target++;	/* trailing null */
-+		name_len_target *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len_target = strnlen(toName, 530);
-+		name_len_target++;	/* trailing null */
-+		strncpy(data_offset, toName, name_len_target);
-+	}
-+
-+	pSMB->DataCount = name_len_target;
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	/* BB find exact max on data count below from sess */
-+	pSMB->MaxDataCount = cpu_to_le16(1000);
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_SET_PATH_INFORMATION);
-+	pSMB->ByteCount = 3 /* pad */  + pSMB->ParameterCount + pSMB->DataCount;
-+	pSMB->DataCount = cpu_to_le16(pSMB->DataCount);
-+	pSMB->ParameterCount = cpu_to_le16(pSMB->ParameterCount);
-+	pSMB->TotalDataCount = pSMB->DataCount;
-+	pSMB->TotalParameterCount = pSMB->ParameterCount;
-+	pSMB->ParameterOffset = cpu_to_le16(pSMB->ParameterOffset);
-+	pSMB->DataOffset = cpu_to_le16(pSMB->DataOffset);
-+	pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_LINK);
-+	pSMB->Reserved4 = 0;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1,
-+		     ("Send error in SetPathInfo (create symlink) = %d",
-+		      rc));
-+	}
-+
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	if (rc == -EAGAIN)
-+		goto createSymLinkRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSUnixCreateHardLink(const int xid, struct cifsTconInfo *tcon,
-+		       const char *fromName, const char *toName,
-+		       const struct nls_table *nls_codepage)
-+{
-+	TRANSACTION2_SPI_REQ *pSMB = NULL;
-+	TRANSACTION2_SPI_RSP *pSMBr = NULL;
-+	char *data_offset;
-+	int name_len;
-+	int name_len_target;
-+	int rc = 0;
-+	int bytes_returned = 0;
-+
-+	cFYI(1, ("In Create Hard link Unix style"));
-+createHardLinkRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len = cifs_strtoUCS((wchar_t *) pSMB->FileName, toName, 530
-+					 /* find define for this maxpathcomponent */
-+					 , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(toName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->FileName, toName, name_len);
-+	}
-+	pSMB->ParameterCount = 6 + name_len;
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = offsetof(struct smb_com_transaction2_spi_req,
-+                                     InformationLevel) - 4;
-+	pSMB->DataOffset = pSMB->ParameterOffset + pSMB->ParameterCount;
-+
-+	data_offset = (char *) (&pSMB->hdr.Protocol) + pSMB->DataOffset;
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len_target =
-+		    cifs_strtoUCS((wchar_t *) data_offset, fromName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len_target++;	/* trailing null */
-+		name_len_target *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len_target = strnlen(fromName, 530);
-+		name_len_target++;	/* trailing null */
-+		strncpy(data_offset, fromName, name_len_target);
-+	}
-+
-+	pSMB->DataCount = name_len_target;
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	/* BB find exact max on data count below from sess*/
-+	pSMB->MaxDataCount = cpu_to_le16(1000);
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_SET_PATH_INFORMATION);
-+	pSMB->ByteCount = 3 /* pad */  + pSMB->ParameterCount + pSMB->DataCount;
-+	pSMB->ParameterCount = cpu_to_le16(pSMB->ParameterCount);
-+	pSMB->TotalParameterCount = pSMB->ParameterCount;
-+	pSMB->DataCount = cpu_to_le16(pSMB->DataCount);
-+	pSMB->TotalDataCount = pSMB->DataCount;
-+	pSMB->ParameterOffset = cpu_to_le16(pSMB->ParameterOffset);
-+	pSMB->DataOffset = cpu_to_le16(pSMB->DataOffset);
-+	pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_HLINK);
-+	pSMB->Reserved4 = 0;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Send error in SetPathInfo (hard link) = %d", rc));
-+	}
-+
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	if (rc == -EAGAIN)
-+		goto createHardLinkRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSCreateHardLink(const int xid, struct cifsTconInfo *tcon,
-+		   const char *fromName, const char *toName,
-+		   const struct nls_table *nls_codepage)
-+{
-+	int rc = 0;
-+	NT_RENAME_REQ *pSMB = NULL;
-+	RENAME_RSP *pSMBr = NULL;
-+	int bytes_returned;
-+	int name_len, name_len2;
-+
-+	cFYI(1, ("In CIFSCreateHardLink"));
-+winCreateHardLinkRetry:
-+
-+	rc = smb_init(SMB_COM_NT_RENAME, 4, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->SearchAttributes =
-+	    cpu_to_le16(ATTR_READONLY | ATTR_HIDDEN | ATTR_SYSTEM |
-+			ATTR_DIRECTORY);
-+	pSMB->Flags = cpu_to_le16(CREATE_HARD_LINK);
-+	pSMB->ClusterCount = 0;
-+
-+	pSMB->BufferFormat = 0x04;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->OldFileName, fromName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+		pSMB->OldFileName[name_len] = 0;	/* pad */
-+		pSMB->OldFileName[name_len + 1] = 0x04; 
-+		name_len2 =
-+		    cifs_strtoUCS((wchar_t *) & pSMB->
-+				  OldFileName[name_len + 2], toName, 530,
-+				  nls_codepage);
-+		name_len2 += 1 /* trailing null */  + 1 /* Signature word */ ;
-+		name_len2 *= 2;	/* convert to bytes */
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(fromName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->OldFileName, fromName, name_len);
-+		name_len2 = strnlen(toName, 530);
-+		name_len2++;	/* trailing null */
-+		pSMB->OldFileName[name_len] = 0x04;	/* 2nd buffer format */
-+		strncpy(&pSMB->OldFileName[name_len + 1], toName, name_len2);
-+		name_len2++;	/* trailing null */
-+		name_len2++;	/* signature byte */
-+	}
-+
-+	pSMB->ByteCount = 1 /* string type byte */  + name_len + name_len2;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Send error in hard link (NT rename) = %d", rc));
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	if (rc == -EAGAIN)
-+		goto winCreateHardLinkRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBUnixQuerySymLink(const int xid, struct cifsTconInfo *tcon,
-+			const unsigned char *searchName,
-+			char *symlinkinfo, const int buflen,
-+			const struct nls_table *nls_codepage)
-+{
-+/* SMB_QUERY_FILE_UNIX_LINK */
-+	TRANSACTION2_QPI_REQ *pSMB = NULL;
-+	TRANSACTION2_QPI_RSP *pSMBr = NULL;
-+	int rc = 0;
-+	int bytes_returned;
-+	int name_len;
-+
-+	cFYI(1, ("In QPathSymLinkInfo (Unix) for path %s", searchName));
-+
-+querySymLinkRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->FileName, searchName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(searchName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->FileName, searchName, name_len);
-+	}
-+
-+	pSMB->TotalParameterCount =
-+	    2 /* level */  + 4 /* rsrvd */  + name_len /* incl null */ ;
-+	pSMB->TotalDataCount = 0;
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	/* BB find exact max data count below from sess structure BB */
-+	pSMB->MaxDataCount = cpu_to_le16(4000);
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = cpu_to_le16(offsetof(
-+        struct smb_com_transaction2_qpi_req ,InformationLevel) - 4);
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_PATH_INFORMATION);
-+	pSMB->ByteCount = pSMB->TotalParameterCount + 1 /* pad */ ;
-+	pSMB->TotalParameterCount = cpu_to_le16(pSMB->TotalParameterCount);
-+	pSMB->ParameterCount = pSMB->TotalParameterCount;
-+	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_UNIX_LINK);
-+	pSMB->Reserved4 = 0;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Send error in QuerySymLinkInfo = %d", rc));
-+	} else {		/* decode response */
-+		pSMBr->DataOffset = le16_to_cpu(pSMBr->DataOffset);
-+		pSMBr->DataCount = le16_to_cpu(pSMBr->DataCount);
-+		if ((pSMBr->ByteCount < 2) || (pSMBr->DataOffset > 512))
-+		/* BB also check enough total bytes returned */
-+			rc = -EIO;	/* bad smb */
-+		else {
-+			if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
-+				name_len = UniStrnlen((wchar_t *) ((char *)
-+					&pSMBr->hdr.Protocol +pSMBr->DataOffset),
-+					min_t(const int, buflen,pSMBr->DataCount) / 2);
-+				cifs_strfromUCS_le(symlinkinfo,
-+					(wchar_t *) ((char *)&pSMBr->hdr.Protocol +
-+						pSMBr->DataOffset),
-+					name_len, nls_codepage);
-+			} else {
-+				strncpy(symlinkinfo,
-+					(char *) &pSMBr->hdr.Protocol + 
-+						pSMBr->DataOffset,
-+					min_t(const int, buflen, pSMBr->DataCount));
-+			}
-+			symlinkinfo[buflen] = 0;
-+	/* just in case so calling code does not go off the end of buffer */
-+		}
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	if (rc == -EAGAIN)
-+		goto querySymLinkRetry;
-+	return rc;
-+}
-+
-+
-+
-+int
-+CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
-+			const unsigned char *searchName,
-+			char *symlinkinfo, const int buflen,__u16 fid,
-+			const struct nls_table *nls_codepage)
-+{
-+	int rc = 0;
-+	int bytes_returned;
-+	int name_len;
-+	struct smb_com_transaction_ioctl_req * pSMB;
-+	struct smb_com_transaction_ioctl_rsp * pSMBr;
-+
-+	cFYI(1, ("In Windows reparse style QueryLink for path %s", searchName));
-+	rc = smb_init(SMB_COM_NT_TRANSACT, 23, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->TotalParameterCount = 0 ;
-+	pSMB->TotalDataCount = 0;
-+	pSMB->MaxParameterCount = cpu_to_le32(2);
-+	/* BB find exact data count max from sess structure BB */
-+	pSMB->MaxDataCount = cpu_to_le32(4000);
-+	pSMB->MaxSetupCount = 4;
-+	pSMB->Reserved = 0;
-+	pSMB->ParameterOffset = 0;
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->SetupCount = 4;
-+	pSMB->SubCommand = cpu_to_le16(NT_TRANSACT_IOCTL);
-+	pSMB->ParameterCount = pSMB->TotalParameterCount;
-+	pSMB->FunctionCode = cpu_to_le32(FSCTL_GET_REPARSE_POINT);
-+	pSMB->IsFsctl = 1; /* FSCTL */
-+	pSMB->IsRootFlag = 0;
-+	pSMB->Fid = fid; /* file handle always le */
-+	pSMB->ByteCount = 0;
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Send error in QueryReparseLinkInfo = %d", rc));
-+	} else {		/* decode response */
-+		pSMBr->DataOffset = le16_to_cpu(pSMBr->DataOffset);
-+		pSMBr->DataCount = le16_to_cpu(pSMBr->DataCount);
-+		if ((pSMBr->ByteCount < 2) || (pSMBr->DataOffset > 512))
-+		/* BB also check enough total bytes returned */
-+			rc = -EIO;	/* bad smb */
-+		else {
-+			if(pSMBr->DataCount && (pSMBr->DataCount < 2048)) {
-+		/* could also validate reparse tag && better check name length */
-+				struct reparse_data * reparse_buf = (struct reparse_data *)
-+					((char *)&pSMBr->hdr.Protocol + pSMBr->DataOffset);
-+				if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
-+					name_len = UniStrnlen((wchar_t *)
-+							(reparse_buf->LinkNamesBuf + 
-+							reparse_buf->TargetNameOffset),
-+							min(buflen/2, reparse_buf->TargetNameLen / 2)); 
-+					cifs_strfromUCS_le(symlinkinfo,
-+						(wchar_t *) (reparse_buf->LinkNamesBuf + 
-+						reparse_buf->TargetNameOffset),
-+						name_len, nls_codepage);
-+				} else { /* ASCII names */
-+					strncpy(symlinkinfo,reparse_buf->LinkNamesBuf + 
-+						reparse_buf->TargetNameOffset, 
-+						min_t(const int, buflen, reparse_buf->TargetNameLen));
-+				}
-+			} else {
-+				rc = -EIO;
-+				cFYI(1,("Invalid return data count on get reparse info ioctl"));
-+			}
-+			symlinkinfo[buflen] = 0; /* just in case so the caller
-+					does not go off the end of the buffer */
-+			cFYI(1,("readlink result - %s ",symlinkinfo));
-+		}
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	/* Note: On -EAGAIN error only caller can retry on handle based calls
-+		since file handle passed in no longer valid */
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBQPathInfo(const int xid, struct cifsTconInfo *tcon,
-+		 const unsigned char *searchName,
-+		 FILE_ALL_INFO * pFindData,
-+		 const struct nls_table *nls_codepage)
-+{
-+/* level 263 SMB_QUERY_FILE_ALL_INFO */
-+	TRANSACTION2_QPI_REQ *pSMB = NULL;
-+	TRANSACTION2_QPI_RSP *pSMBr = NULL;
-+	int rc = 0;
-+	int bytes_returned;
-+	int name_len;
-+
-+	cFYI(1, ("In QPathInfo path %s", searchName));
-+QPathInfoRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->FileName, searchName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(searchName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->FileName, searchName, name_len);
-+	}
-+
-+	pSMB->TotalParameterCount = 2 /* level */  + 4 /* reserved */  +
-+	    name_len /* includes null */ ;
-+	pSMB->TotalDataCount = 0;
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	pSMB->MaxDataCount = cpu_to_le16(4000);	/* BB find exact max SMB PDU from sess structure BB */
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = cpu_to_le16(offsetof(
-+        struct smb_com_transaction2_qpi_req ,InformationLevel) - 4);
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_PATH_INFORMATION);
-+	pSMB->ByteCount = pSMB->TotalParameterCount + 1 /* pad */ ;
-+	pSMB->TotalParameterCount = cpu_to_le16(pSMB->TotalParameterCount);
-+	pSMB->ParameterCount = pSMB->TotalParameterCount;
-+	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_ALL_INFO);
-+	pSMB->Reserved4 = 0;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Send error in QPathInfo = %d", rc));
-+	} else {		/* decode response */
-+		pSMBr->DataOffset = le16_to_cpu(pSMBr->DataOffset);
-+		/* BB also check enough total bytes returned */
-+		/* BB we need to improve the validity checking
-+		of these trans2 responses */
-+		if ((pSMBr->ByteCount < 40) || (pSMBr->DataOffset > 512)) 
-+			rc = -EIO;	/* bad smb */
-+		else if (pFindData){
-+			memcpy((char *) pFindData,
-+			       (char *) &pSMBr->hdr.Protocol +
-+			       pSMBr->DataOffset, sizeof (FILE_ALL_INFO));
-+		} else
-+		    rc = -ENOMEM;
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	if (rc == -EAGAIN)
-+		goto QPathInfoRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBUnixQPathInfo(const int xid, struct cifsTconInfo *tcon,
-+		     const unsigned char *searchName,
-+		     FILE_UNIX_BASIC_INFO * pFindData,
-+		     const struct nls_table *nls_codepage)
-+{
-+/* SMB_QUERY_FILE_UNIX_BASIC */
-+	TRANSACTION2_QPI_REQ *pSMB = NULL;
-+	TRANSACTION2_QPI_RSP *pSMBr = NULL;
-+	int rc = 0;
-+	int bytes_returned = 0;
-+	int name_len;
-+
-+	cFYI(1, ("In QPathInfo (Unix) the path %s", searchName));
-+UnixQPathInfoRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->FileName, searchName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(searchName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->FileName, searchName, name_len);
-+	}
-+
-+	pSMB->TotalParameterCount = 2 /* level */  + 4 /* reserved */  +
-+	    name_len /* includes null */ ;
-+	pSMB->TotalDataCount = 0;
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	/* BB find exact max SMB PDU from sess structure BB */
-+	pSMB->MaxDataCount = cpu_to_le16(4000); 
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = cpu_to_le16(offsetof(
-+        struct smb_com_transaction2_qpi_req ,InformationLevel) - 4);
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_PATH_INFORMATION);
-+	pSMB->ByteCount = pSMB->TotalParameterCount + 1 /* pad */ ;
-+	pSMB->TotalParameterCount = cpu_to_le16(pSMB->TotalParameterCount);
-+	pSMB->ParameterCount = pSMB->TotalParameterCount;
-+	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_UNIX_BASIC);
-+	pSMB->Reserved4 = 0;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Send error in QPathInfo = %d", rc));
-+	} else {		/* decode response */
-+		pSMBr->DataOffset = le16_to_cpu(pSMBr->DataOffset);
-+		/* BB also check if enough total bytes returned */
-+		if ((pSMBr->ByteCount < sizeof(FILE_UNIX_BASIC_INFO)) || 
-+			(pSMBr->DataOffset > 512) || 
-+			(pSMBr->DataOffset < sizeof(struct smb_hdr))) {
-+			cFYI(1,("UnixQPathinfo invalid data offset %d bytes returned %d",
-+					(int)pSMBr->DataOffset,bytes_returned));
-+			rc = -EIO;	/* bad smb */
-+		} else {
-+			memcpy((char *) pFindData,
-+			       (char *) &pSMBr->hdr.Protocol +
-+			       pSMBr->DataOffset,
-+			       sizeof (FILE_UNIX_BASIC_INFO));
-+		}
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	if (rc == -EAGAIN)
-+		goto UnixQPathInfoRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSFindSingle(const int xid, struct cifsTconInfo *tcon,
-+	       const char *searchName, FILE_ALL_INFO * findData,
-+	       const struct nls_table *nls_codepage)
-+{
-+/* level 257 SMB_ */
-+	TRANSACTION2_FFIRST_REQ *pSMB = NULL;
-+	TRANSACTION2_FFIRST_RSP *pSMBr = NULL;
-+	int rc = 0;
-+	int bytes_returned;
-+	int name_len;
-+
-+	cFYI(1, ("In FindUnique"));
-+findUniqueRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->FileName, searchName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(searchName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->FileName, searchName, name_len);
-+	}
-+
-+	pSMB->TotalParameterCount = 12 + name_len /* includes null */ ;
-+	pSMB->TotalDataCount = 0;	/* no EAs */
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	pSMB->MaxDataCount = cpu_to_le16(4000);	/* BB find exact max SMB PDU from sess structure BB */
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = cpu_to_le16(
-+        offsetof(struct smb_com_transaction2_ffirst_req,InformationLevel) - 4);
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->SetupCount = 1;	/* one byte, no need to le convert */
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_FIND_FIRST);
-+	pSMB->ByteCount = pSMB->TotalParameterCount + 1 /* pad */ ;
-+	pSMB->TotalParameterCount = cpu_to_le16(pSMB->TotalDataCount);
-+	pSMB->ParameterCount = pSMB->TotalParameterCount;
-+	pSMB->SearchAttributes =
-+	    cpu_to_le16(ATTR_READONLY | ATTR_HIDDEN | ATTR_SYSTEM |
-+			ATTR_DIRECTORY);
-+	pSMB->SearchCount = cpu_to_le16(16);	/* BB increase */
-+	pSMB->SearchFlags = cpu_to_le16(1);
-+	pSMB->InformationLevel = cpu_to_le16(SMB_FIND_FILE_DIRECTORY_INFO);
-+	pSMB->SearchStorageType = 0;	/* BB what should we set this to? BB */
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+
-+	if (rc) {
-+		cFYI(1, ("Send error in FindFileDirInfo = %d", rc));
-+	} else {		/* decode response */
-+
-+		/* BB fill in */
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	if (rc == -EAGAIN)
-+		goto findUniqueRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSFindFirst(const int xid, struct cifsTconInfo *tcon,
-+	      const char *searchName, FILE_DIRECTORY_INFO * findData,
-+	      T2_FFIRST_RSP_PARMS * findParms,
-+	      const struct nls_table *nls_codepage, int *pUnicodeFlag,
-+	      int *pUnixFlag)
-+{
-+/* level 257 SMB_ */
-+	TRANSACTION2_FFIRST_REQ *pSMB = NULL;
-+	TRANSACTION2_FFIRST_RSP *pSMBr = NULL;
-+	char *response_data;
-+	int rc = 0;
-+	int bytes_returned;
-+	int name_len;
-+
-+	cFYI(1, ("In FindFirst"));
-+findFirstRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->FileName, searchName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(searchName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->FileName, searchName, name_len);
-+	}
-+
-+	pSMB->TotalParameterCount = 12 + name_len /* includes null */ ;
-+	pSMB->TotalDataCount = 0;	/* no EAs */
-+	pSMB->MaxParameterCount = cpu_to_le16(10);
-+	pSMB->MaxDataCount = cpu_to_le16((tcon->ses->server->maxBuf -
-+					  MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ByteCount = pSMB->TotalParameterCount + 1 /* pad */ ;
-+	pSMB->TotalParameterCount = cpu_to_le16(pSMB->TotalParameterCount);
-+	pSMB->ParameterCount = pSMB->TotalParameterCount;
-+	pSMB->ParameterOffset = cpu_to_le16(offsetof(struct 
-+        smb_com_transaction2_ffirst_req, SearchAttributes) - 4);
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->SetupCount = 1;	/* one byte no need to make endian neutral */
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_FIND_FIRST);
-+	pSMB->SearchAttributes =
-+	    cpu_to_le16(ATTR_READONLY | ATTR_HIDDEN | ATTR_SYSTEM |
-+			ATTR_DIRECTORY);
-+	pSMB->SearchCount = cpu_to_le16(CIFS_MAX_MSGSIZE / sizeof (FILE_DIRECTORY_INFO));	/* should this be shrunk even more ? */
-+	pSMB->SearchFlags = cpu_to_le16(CIFS_SEARCH_CLOSE_AT_END | CIFS_SEARCH_RETURN_RESUME);
-+
-+	/* test for Unix extensions */
-+	if (tcon->ses->capabilities & CAP_UNIX) {
-+		pSMB->InformationLevel = cpu_to_le16(SMB_FIND_FILE_UNIX);
-+		*pUnixFlag = TRUE;
-+	} else {
-+		pSMB->InformationLevel =
-+		    cpu_to_le16(SMB_FIND_FILE_DIRECTORY_INFO);
-+		*pUnixFlag = FALSE;
-+	}
-+	pSMB->SearchStorageType = 0;	/* BB what should we set this to? It is not clear if it matters BB */
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+
-+	if (rc) {		/* BB add logic to retry regular search if Unix search rejected unexpectedly by server */
-+		cFYI(1, ("Error in FindFirst = %d", rc));
-+	} else {		/* decode response */
-+		/* BB add safety checks for these memcpys */
-+		if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
-+			*pUnicodeFlag = TRUE;
-+		else
-+			*pUnicodeFlag = FALSE;
-+		memcpy(findParms,
-+		       (char *) &pSMBr->hdr.Protocol +
-+		       le16_to_cpu(pSMBr->ParameterOffset),
-+		       sizeof (T2_FFIRST_RSP_PARMS));
-+		/* search handle can stay LE and EAoffset not needed so not converted */
-+		findParms->EndofSearch = le16_to_cpu(findParms->EndofSearch);
-+		findParms->LastNameOffset =
-+		    le16_to_cpu(findParms->LastNameOffset);
-+		findParms->SearchCount = le16_to_cpu(findParms->SearchCount);
-+		response_data =
-+		    (char *) &pSMBr->hdr.Protocol +
-+		    le16_to_cpu(pSMBr->DataOffset);
-+		memcpy(findData, response_data, le16_to_cpu(pSMBr->DataCount));
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	if (rc == -EAGAIN)
-+		goto findFirstRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSFindNext(const int xid, struct cifsTconInfo *tcon,
-+		FILE_DIRECTORY_INFO * findData, T2_FNEXT_RSP_PARMS * findParms,
-+		const __u16 searchHandle, char * resume_file_name, int name_len,
-+		__u32 resume_key, int *pUnicodeFlag, int *pUnixFlag)
-+{
-+/* level 257 SMB_ */
-+	TRANSACTION2_FNEXT_REQ *pSMB = NULL;
-+	TRANSACTION2_FNEXT_RSP *pSMBr = NULL;
-+	char *response_data;
-+	int rc = 0;
-+	int bytes_returned;
-+
-+	cFYI(1, ("In FindNext"));
-+
-+	if(resume_file_name == NULL) {
-+		return -EIO;
-+	}
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->TotalParameterCount = 14;	/* includes 2 bytes of null string, converted to LE below */
-+	pSMB->TotalDataCount = 0;	/* no EAs */
-+	pSMB->MaxParameterCount = cpu_to_le16(8);
-+	pSMB->MaxDataCount =
-+	    cpu_to_le16((tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset =  cpu_to_le16(offsetof(
-+        struct smb_com_transaction2_fnext_req,SearchHandle) - 4);
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_FIND_NEXT);
-+	pSMB->SearchHandle = searchHandle;	/* always kept as le */
-+	findParms->SearchCount = 0;	/* set to zero in case of error */
-+	pSMB->SearchCount =
-+	    cpu_to_le16(CIFS_MAX_MSGSIZE / sizeof (FILE_DIRECTORY_INFO));
-+	/* test for Unix extensions */
-+	if (tcon->ses->capabilities & CAP_UNIX) {
-+		pSMB->InformationLevel = cpu_to_le16(SMB_FIND_FILE_UNIX);
-+		*pUnixFlag = TRUE;
-+	} else {
-+		pSMB->InformationLevel =
-+		    cpu_to_le16(SMB_FIND_FILE_DIRECTORY_INFO);
-+		*pUnixFlag = FALSE;
-+	}
-+	pSMB->ResumeKey = resume_key;
-+	pSMB->SearchFlags =
-+	    cpu_to_le16(CIFS_SEARCH_CLOSE_AT_END | CIFS_SEARCH_RETURN_RESUME);
-+	/* BB add check to make sure we do not cross end of smb */
-+	if(name_len < CIFS_MAX_MSGSIZE) {
-+		memcpy(pSMB->ResumeFileName, resume_file_name, name_len);
-+		pSMB->ByteCount += name_len;
-+	}
-+	pSMB->TotalParameterCount += name_len;
-+	pSMB->ByteCount = pSMB->TotalParameterCount + 1 /* pad */ ;
-+	pSMB->TotalParameterCount = cpu_to_le16(pSMB->TotalParameterCount);
-+	pSMB->ParameterCount = pSMB->TotalParameterCount;
-+	/* BB improve error handling here */
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+
-+	if (rc) {
-+		if (rc == -EBADF)
-+			rc = 0;	/* search probably was closed at end of search above */
-+		else
-+			cFYI(1, ("FindNext returned = %d", rc));
-+	} else {		/* decode response */
-+		/* BB add safety checks for these memcpys */
-+		if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
-+			*pUnicodeFlag = TRUE;
-+		else
-+			*pUnicodeFlag = FALSE;
-+		memcpy(findParms,
-+		       (char *) &pSMBr->hdr.Protocol +
-+		       le16_to_cpu(pSMBr->ParameterOffset),
-+		       sizeof (T2_FNEXT_RSP_PARMS));
-+		findParms->EndofSearch = le16_to_cpu(findParms->EndofSearch);
-+		findParms->LastNameOffset =
-+		    le16_to_cpu(findParms->LastNameOffset);
-+		findParms->SearchCount = le16_to_cpu(findParms->SearchCount);
-+		response_data =
-+		    (char *) &pSMBr->hdr.Protocol +
-+		    le16_to_cpu(pSMBr->DataOffset);
-+		memcpy(findData, response_data, le16_to_cpu(pSMBr->DataCount));
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	/* Note: On -EAGAIN error only caller can retry on handle based calls
-+		since file handle passed in no longer valid */
-+
-+	return rc;
-+}
-+
-+int
-+CIFSFindClose(const int xid, struct cifsTconInfo *tcon, const __u16 searchHandle)
-+{
-+	int rc = 0;
-+	FINDCLOSE_REQ *pSMB = NULL;
-+	CLOSE_RSP *pSMBr = NULL;
-+	int bytes_returned;
-+
-+	cFYI(1, ("In CIFSSMBFindClose"));
-+	rc = smb_init(SMB_COM_FIND_CLOSE2, 1, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	/* no sense returning error if session restarted
-+		file handle has been closed */
-+	if(rc == -EAGAIN)
-+		return 0;
-+	if (rc)
-+		return rc;
-+
-+	pSMB->FileID = searchHandle;
-+	pSMB->ByteCount = 0;
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cERROR(1, ("Send error in FindClose = %d", rc));
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	/* Since session is dead, search handle closed on server already */
-+	if (rc == -EAGAIN)
-+		rc = 0;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSGetDFSRefer(const int xid, struct cifsSesInfo *ses,
-+		const unsigned char *searchName,
-+		unsigned char **targetUNCs,
-+		unsigned int *number_of_UNC_in_array,
-+		const struct nls_table *nls_codepage)
-+{
-+/* TRANS2_GET_DFS_REFERRAL */
-+	TRANSACTION2_GET_DFS_REFER_REQ *pSMB = NULL;
-+	TRANSACTION2_GET_DFS_REFER_RSP *pSMBr = NULL;
-+	struct dfs_referral_level_3 * referrals = NULL;
-+	int rc = 0;
-+	int bytes_returned;
-+	int name_len;
-+	unsigned int i;
-+	char * temp;
-+	*number_of_UNC_in_array = 0;
-+	*targetUNCs = NULL;
-+
-+	cFYI(1, ("In GetDFSRefer the path %s", searchName));
-+	if (ses == NULL)
-+		return -ENODEV;
-+getDFSRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, NULL, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->hdr.Tid = ses->ipc_tid;
-+	pSMB->hdr.Uid = ses->Suid;
-+	if (ses->capabilities & CAP_STATUS32) {
-+		pSMB->hdr.Flags2 |= SMBFLG2_ERR_STATUS;
-+	}
-+	if (ses->capabilities & CAP_DFS) {
-+		pSMB->hdr.Flags2 |= SMBFLG2_DFS;
-+	}
-+
-+	if (ses->capabilities & CAP_UNICODE) {
-+		pSMB->hdr.Flags2 |= SMBFLG2_UNICODE;
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->RequestFileName,
-+				  searchName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(searchName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->RequestFileName, searchName, name_len);
-+	}
-+
-+	pSMB->ParameterCount = 2 /* level */  + name_len /*includes null */ ;
-+	pSMB->TotalDataCount = 0;
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->MaxParameterCount = 0;
-+	pSMB->MaxDataCount = cpu_to_le16(4000);	/* BB find exact max SMB PDU from sess structure BB */
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = cpu_to_le16(offsetof(
-+        struct smb_com_transaction2_get_dfs_refer_req, MaxReferralLevel) - 4);
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_GET_DFS_REFERRAL);
-+	pSMB->ByteCount = pSMB->ParameterCount + 3 /* pad */ ;
-+	pSMB->ParameterCount = cpu_to_le16(pSMB->ParameterCount);
-+	pSMB->TotalParameterCount = pSMB->ParameterCount;
-+	pSMB->MaxReferralLevel = cpu_to_le16(3);
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Send error in GetDFSRefer = %d", rc));
-+	} else {		/* decode response */
-+/* BB Add logic to parse referrals here */
-+		pSMBr->DataOffset = le16_to_cpu(pSMBr->DataOffset);
-+		pSMBr->DataCount = le16_to_cpu(pSMBr->DataCount);
-+		cFYI(1,
-+		     ("Decoding GetDFSRefer response.  BCC: %d  Offset %d",
-+		      pSMBr->ByteCount, pSMBr->DataOffset));
-+		if ((pSMBr->ByteCount < 17) || (pSMBr->DataOffset > 512))	/* BB also check enough total bytes returned */
-+			rc = -EIO;	/* bad smb */
-+		else {
-+			referrals = 
-+			    (struct dfs_referral_level_3 *) 
-+					(8 /* sizeof start of data block */ +
-+					pSMBr->DataOffset +
-+					(char *) &pSMBr->hdr.Protocol); 
-+			cFYI(1,("num_referrals: %d dfs flags: 0x%x ... \nfor referral one refer size: 0x%x srv type: 0x%x refer flags: 0x%x ttl: 0x%x",pSMBr->NumberOfReferrals,pSMBr->DFSFlags, referrals->ReferralSize,referrals->ServerType,referrals->ReferralFlags,referrals->TimeToLive));
-+			/* BB This field is actually two bytes in from start of
-+			   data block so we could do safety check that DataBlock
-+			   begins at address of pSMBr->NumberOfReferrals */
-+			*number_of_UNC_in_array = le16_to_cpu(pSMBr->NumberOfReferrals);
-+
-+			/* BB Fix below so can return more than one referral */
-+			if(*number_of_UNC_in_array > 1)
-+				*number_of_UNC_in_array = 1;
-+
-+			/* get the length of the strings describing refs */
-+			name_len = 0;
-+			for(i=0;i<*number_of_UNC_in_array;i++) {
-+				/* make sure that DfsPathOffset not past end */
-+				referrals->DfsPathOffset = le16_to_cpu(referrals->DfsPathOffset);
-+				if(referrals->DfsPathOffset > pSMBr->DataCount) {
-+					/* if invalid referral, stop here and do 
-+					not try to copy any more */
-+					*number_of_UNC_in_array = i;
-+					break;
-+				} 
-+				temp = ((char *)referrals) + referrals->DfsPathOffset;
-+
-+				if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
-+					name_len += UniStrnlen((wchar_t *)temp,pSMBr->DataCount);
-+				} else {
-+					name_len += strnlen(temp,pSMBr->DataCount);
-+				}
-+				referrals++;
-+				/* BB add check that referral pointer does not fall off end PDU */
-+				
-+			}
-+			/* BB add check for name_len bigger than bcc */
-+			*targetUNCs = 
-+				kmalloc(name_len+1+ (*number_of_UNC_in_array),GFP_KERNEL);
-+			/* copy the ref strings */
-+			referrals =  
-+			    (struct dfs_referral_level_3 *) 
-+					(8 /* sizeof data hdr */ +
-+					pSMBr->DataOffset + 
-+					(char *) &pSMBr->hdr.Protocol);
-+
-+			for(i=0;i<*number_of_UNC_in_array;i++) {
-+				temp = ((char *)referrals) + referrals->DfsPathOffset;
-+				if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
-+					cifs_strfromUCS_le(*targetUNCs,
-+						(wchar_t *) temp, name_len, nls_codepage);
-+				} else {
-+					strncpy(*targetUNCs,temp,name_len);
-+				}
-+				/*  BB update target_uncs pointers */
-+				referrals++;
-+			}
-+			temp = *targetUNCs;
-+			temp[name_len] = 0;
-+		}
-+
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	if (rc == -EAGAIN)
-+		goto getDFSRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBQFSInfo(const int xid, struct cifsTconInfo *tcon,
-+	       struct statfs *FSData, const struct nls_table *nls_codepage)
-+{
-+/* level 0x103 SMB_QUERY_FILE_SYSTEM_INFO */
-+	TRANSACTION2_QFSI_REQ *pSMB = NULL;
-+	TRANSACTION2_QFSI_RSP *pSMBr = NULL;
-+	FILE_SYSTEM_INFO *response_data;
-+	int rc = 0;
-+	int bytes_returned = 0;
-+
-+	cFYI(1, ("In QFSInfo"));
-+QFSInfoRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->TotalParameterCount = 2;	/* level */
-+	pSMB->TotalDataCount = 0;
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	pSMB->MaxDataCount = cpu_to_le16(1000);	/* BB find exact max SMB PDU from sess structure BB */
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ByteCount = pSMB->TotalParameterCount + 1 /* pad */ ;
-+	pSMB->TotalParameterCount = cpu_to_le16(pSMB->TotalParameterCount);
-+	pSMB->ParameterCount = pSMB->TotalParameterCount;
-+	pSMB->ParameterOffset = cpu_to_le16(offsetof(
-+        struct smb_com_transaction2_qfsi_req, InformationLevel) - 4);
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
-+	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FS_SIZE_INFO);
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cERROR(1, ("Send error in QFSInfo = %d", rc));
-+	} else {		/* decode response */
-+		pSMBr->DataOffset = le16_to_cpu(pSMBr->DataOffset);
-+		cFYI(1,
-+		     ("Decoding qfsinfo response.  BCC: %d  Offset %d",
-+		      pSMBr->ByteCount, pSMBr->DataOffset));
-+		if ((pSMBr->ByteCount < 24) || (pSMBr->DataOffset > 512))	/* BB also check enough total bytes returned */
-+			rc = -EIO;	/* bad smb */
-+		else {
-+			response_data =
-+			    (FILE_SYSTEM_INFO
-+			     *) (((char *) &pSMBr->hdr.Protocol) +
-+				 pSMBr->DataOffset);
-+			FSData->f_bsize =
-+			    le32_to_cpu(response_data->BytesPerSector) *
-+			    le32_to_cpu(response_data->
-+					SectorsPerAllocationUnit);
-+			FSData->f_blocks =
-+			    le64_to_cpu(response_data->TotalAllocationUnits);
-+			FSData->f_bfree = FSData->f_bavail =
-+			    le64_to_cpu(response_data->FreeAllocationUnits);
-+			cFYI(1,
-+			     ("Blocks: %lld  Free: %lld Block size %ld",
-+			      (unsigned long long)FSData->f_blocks,
-+			      (unsigned long long)FSData->f_bfree,
-+			      FSData->f_bsize));
-+		}
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	if (rc == -EAGAIN)
-+		goto QFSInfoRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBQFSAttributeInfo(int xid, struct cifsTconInfo *tcon,
-+			const struct nls_table *nls_codepage)
-+{
-+/* level 0x105  SMB_QUERY_FILE_SYSTEM_INFO */
-+	TRANSACTION2_QFSI_REQ *pSMB = NULL;
-+	TRANSACTION2_QFSI_RSP *pSMBr = NULL;
-+	FILE_SYSTEM_ATTRIBUTE_INFO *response_data;
-+	int rc = 0;
-+	int bytes_returned = 0;
-+
-+	cFYI(1, ("In QFSAttributeInfo"));
-+QFSAttributeRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->TotalParameterCount = 2;	/* level */
-+	pSMB->TotalDataCount = 0;
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	pSMB->MaxDataCount = cpu_to_le16(1000);	/* BB find exact max SMB PDU from sess structure BB */
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ByteCount = pSMB->TotalParameterCount + 1 /* pad */ ;
-+	pSMB->TotalParameterCount = cpu_to_le16(pSMB->TotalParameterCount);
-+	pSMB->ParameterCount = pSMB->TotalParameterCount;
-+	pSMB->ParameterOffset = cpu_to_le16(offsetof(
-+        struct smb_com_transaction2_qfsi_req, InformationLevel) - 4);
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
-+	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FS_ATTRIBUTE_INFO);
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cERROR(1, ("Send error in QFSAttributeInfo = %d", rc));
-+	} else {		/* decode response */
-+		pSMBr->DataOffset = le16_to_cpu(pSMBr->DataOffset);
-+		if ((pSMBr->ByteCount < 13) || (pSMBr->DataOffset > 512)) {	/* BB also check enough bytes returned */
-+			rc = -EIO;	/* bad smb */
-+		} else {
-+			response_data =
-+			    (FILE_SYSTEM_ATTRIBUTE_INFO
-+			     *) (((char *) &pSMBr->hdr.Protocol) +
-+				 pSMBr->DataOffset);
-+			response_data->Attributes = le32_to_cpu(response_data->Attributes);
-+			response_data->MaxPathNameComponentLength = 
-+				le32_to_cpu(response_data->MaxPathNameComponentLength);
-+			response_data->FileSystemNameLen = 
-+				le32_to_cpu(response_data->FileSystemNameLen);
-+			memcpy(&tcon->fsAttrInfo, response_data,
-+			       sizeof (FILE_SYSTEM_ATTRIBUTE_INFO));
-+		}
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	if (rc == -EAGAIN)
-+		goto QFSAttributeRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBQFSDeviceInfo(int xid, struct cifsTconInfo *tcon,
-+		     const struct nls_table *nls_codepage)
-+{
-+/* level 0x104 SMB_QUERY_FILE_SYSTEM_INFO */
-+	TRANSACTION2_QFSI_REQ *pSMB = NULL;
-+	TRANSACTION2_QFSI_RSP *pSMBr = NULL;
-+	FILE_SYSTEM_DEVICE_INFO *response_data;
-+	int rc = 0;
-+	int bytes_returned = 0;
-+
-+	cFYI(1, ("In QFSDeviceInfo"));
-+QFSDeviceRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->TotalParameterCount = 2;	/* level */
-+	pSMB->TotalDataCount = 0;
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	pSMB->MaxDataCount = cpu_to_le16(1000);	/* BB find exact max SMB PDU from sess structure BB */
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ByteCount = pSMB->TotalParameterCount + 1 /* pad */ ;
-+	pSMB->TotalParameterCount = cpu_to_le16(pSMB->TotalParameterCount);
-+	pSMB->ParameterCount = pSMB->TotalParameterCount;
-+	pSMB->ParameterOffset = cpu_to_le16(offsetof(
-+        struct smb_com_transaction2_qfsi_req, InformationLevel) - 4);
-+
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
-+	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FS_DEVICE_INFO);
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Send error in QFSDeviceInfo = %d", rc));
-+	} else {		/* decode response */
-+		pSMBr->DataOffset = le16_to_cpu(pSMBr->DataOffset);
-+		if ((pSMBr->ByteCount < sizeof (FILE_SYSTEM_DEVICE_INFO))
-+                 || (pSMBr->DataOffset > 512))
-+			rc = -EIO;	/* bad smb */
-+		else {
-+			response_data =
-+			    (FILE_SYSTEM_DEVICE_INFO
-+			     *) (((char *) &pSMBr->hdr.Protocol) +
-+				 pSMBr->DataOffset);
-+			response_data->DeviceType = 
-+				le32_to_cpu(response_data->DeviceType);
-+			response_data->DeviceCharacteristics = 
-+				le32_to_cpu(response_data->DeviceCharacteristics);
-+			memcpy(&tcon->fsDevInfo, response_data,
-+			       sizeof (FILE_SYSTEM_DEVICE_INFO));
-+		}
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	if (rc == -EAGAIN)
-+		goto QFSDeviceRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBQFSUnixInfo(int xid, struct cifsTconInfo *tcon,
-+		   const struct nls_table *nls_codepage)
-+{
-+/* level 0x200  SMB_QUERY_CIFS_UNIX_INFO */
-+	TRANSACTION2_QFSI_REQ *pSMB = NULL;
-+	TRANSACTION2_QFSI_RSP *pSMBr = NULL;
-+	FILE_SYSTEM_UNIX_INFO *response_data;
-+	int rc = 0;
-+	int bytes_returned = 0;
-+
-+	cFYI(1, ("In QFSUnixInfo"));
-+QFSUnixRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->ParameterCount = 2;	/* level */
-+	pSMB->TotalDataCount = 0;
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	pSMB->MaxDataCount = cpu_to_le16(100);	/* BB find exact max SMB PDU from sess structure BB */
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ByteCount = pSMB->ParameterCount + 1 /* pad */ ;
-+	pSMB->ParameterCount = cpu_to_le16(pSMB->ParameterCount);
-+	pSMB->TotalParameterCount = pSMB->ParameterCount;
-+	pSMB->ParameterOffset = cpu_to_le16(offsetof(struct 
-+        smb_com_transaction2_qfsi_req, InformationLevel) - 4);
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
-+	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_CIFS_UNIX_INFO);
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cERROR(1, ("Send error in QFSUnixInfo = %d", rc));
-+	} else {		/* decode response */
-+		pSMBr->DataOffset = cpu_to_le16(pSMBr->DataOffset);
-+		if ((pSMBr->ByteCount < 13) || (pSMBr->DataOffset > 512)) {
-+			rc = -EIO;	/* bad smb */
-+		} else {
-+			response_data =
-+			    (FILE_SYSTEM_UNIX_INFO
-+			     *) (((char *) &pSMBr->hdr.Protocol) +
-+				 pSMBr->DataOffset);
-+			response_data->MajorVersionNumber =
-+				le16_to_cpu(response_data->MajorVersionNumber);
-+			response_data->MinorVersionNumber =
-+				le16_to_cpu(response_data->MinorVersionNumber);
-+			response_data->Capability =
-+				le64_to_cpu(response_data->Capability);
-+			memcpy(&tcon->fsUnixInfo, response_data,
-+			       sizeof (FILE_SYSTEM_UNIX_INFO));
-+		}
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	if (rc == -EAGAIN)
-+		goto QFSUnixRetry;
-+
-+
-+	return rc;
-+}
-+
-+/* We can not use write of zero bytes trick to 
-+   set file size due to need for large file support.  Also note that 
-+   this SetPathInfo is preferred to SetFileInfo based method in next 
-+   routine which is only needed to work around a sharing violation bug
-+   in Samba which this routine can run into */
-+
-+int
-+CIFSSMBSetEOF(int xid, struct cifsTconInfo *tcon, char *fileName,
-+	      __u64 size, int SetAllocation, const struct nls_table *nls_codepage)
-+{
-+	struct smb_com_transaction2_spi_req *pSMB = NULL;
-+	struct smb_com_transaction2_spi_rsp *pSMBr = NULL;
-+	struct file_end_of_file_info *parm_data;
-+	int name_len;
-+	int rc = 0;
-+	int bytes_returned = 0;
-+
-+	cFYI(1, ("In SetEOF"));
-+SetEOFRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->FileName, fileName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(fileName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->FileName, fileName, name_len);
-+	}
-+	pSMB->ParameterCount = 6 + name_len;
-+	pSMB->DataCount = sizeof (struct file_end_of_file_info);
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	pSMB->MaxDataCount = cpu_to_le16(1000);	/* BB find max SMB size from sess */
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = offsetof(struct smb_com_transaction2_spi_req,
-+                                     InformationLevel) - 4;
-+	pSMB->DataOffset = pSMB->ParameterOffset + pSMB->ParameterCount;
-+	if(SetAllocation) {
-+        	if (tcon->ses->capabilities & CAP_INFOLEVEL_PASSTHRU)
-+	            pSMB->InformationLevel =
-+                	cpu_to_le16(SMB_SET_FILE_ALLOCATION_INFO2);
-+        	else
-+	            pSMB->InformationLevel =
-+        	        cpu_to_le16(SMB_SET_FILE_ALLOCATION_INFO);
-+	} else /* Set File Size */  {    
-+	    if (tcon->ses->capabilities & CAP_INFOLEVEL_PASSTHRU)
-+		    pSMB->InformationLevel =
-+		        cpu_to_le16(SMB_SET_FILE_END_OF_FILE_INFO2);
-+	    else
-+		    pSMB->InformationLevel =
-+		        cpu_to_le16(SMB_SET_FILE_END_OF_FILE_INFO);
-+	}
-+
-+	parm_data =
-+	    (struct file_end_of_file_info *) (((char *) &pSMB->hdr.Protocol) +
-+				       pSMB->DataOffset);
-+	pSMB->ParameterOffset = cpu_to_le16(pSMB->ParameterOffset);
-+	pSMB->DataOffset = cpu_to_le16(pSMB->DataOffset);
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_SET_PATH_INFORMATION);
-+	pSMB->ByteCount = 3 /* pad */  + pSMB->ParameterCount + pSMB->DataCount;
-+	pSMB->DataCount = cpu_to_le16(pSMB->DataCount);
-+	pSMB->TotalDataCount = pSMB->DataCount;
-+	pSMB->ParameterCount = cpu_to_le16(pSMB->ParameterCount);
-+	pSMB->TotalParameterCount = pSMB->ParameterCount;
-+	pSMB->Reserved4 = 0;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	parm_data->FileSize = cpu_to_le64(size);
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("SetPathInfo (file size) returned %d", rc));
-+	}
-+
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	if (rc == -EAGAIN)
-+		goto SetEOFRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size, 
-+                   __u16 fid, __u32 pid_of_opener, int SetAllocation)
-+{
-+	struct smb_com_transaction2_sfi_req *pSMB  = NULL;
-+	struct smb_com_transaction2_sfi_rsp *pSMBr = NULL;
-+	char *data_offset;
-+	struct file_end_of_file_info *parm_data;
-+	int rc = 0;
-+	int bytes_returned = 0;
-+	__u32 tmp;
-+
-+	cFYI(1, ("SetFileSize (via SetFileInfo) %lld",
-+			(long long)size));
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	tmp = cpu_to_le32(pid_of_opener);  /* override pid of current process
-+                                         so network fid will be valid */
-+	pSMB->hdr.Pid = tmp & 0xFFFF;
-+	tmp >>= 16;
-+	pSMB->hdr.PidHigh = tmp & 0xFFFF;
-+    
-+	pSMB->ParameterCount = 6;
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = offsetof(struct smb_com_transaction2_sfi_req,
-+                                     Fid) - 4;
-+	pSMB->DataOffset = pSMB->ParameterOffset + pSMB->ParameterCount;
-+
-+	data_offset = (char *) (&pSMB->hdr.Protocol) + pSMB->DataOffset;	
-+
-+	pSMB->DataCount = sizeof(struct file_end_of_file_info);
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	pSMB->MaxDataCount = cpu_to_le16(1000);	/* BB find max SMB PDU from sess */
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
-+	pSMB->ByteCount = 3 /* pad */  + pSMB->ParameterCount + pSMB->DataCount;
-+	pSMB->DataCount = cpu_to_le16(pSMB->DataCount);
-+	pSMB->ParameterCount = cpu_to_le16(pSMB->ParameterCount);
-+	pSMB->TotalDataCount = pSMB->DataCount;
-+	pSMB->TotalParameterCount = pSMB->ParameterCount;
-+	pSMB->ParameterOffset = cpu_to_le16(pSMB->ParameterOffset);
-+	parm_data =
-+		(struct file_end_of_file_info *) (((char *) &pSMB->hdr.Protocol) +
-+			pSMB->DataOffset);
-+	pSMB->DataOffset = cpu_to_le16(pSMB->DataOffset); /* now safe to change to le */
-+	parm_data->FileSize = cpu_to_le64(size);
-+	pSMB->Fid = fid;
-+	if(SetAllocation) {
-+		if (tcon->ses->capabilities & CAP_INFOLEVEL_PASSTHRU)
-+			pSMB->InformationLevel =
-+				cpu_to_le16(SMB_SET_FILE_ALLOCATION_INFO2);
-+		else
-+			pSMB->InformationLevel =
-+				cpu_to_le16(SMB_SET_FILE_ALLOCATION_INFO);
-+	} else /* Set File Size */  {    
-+	    if (tcon->ses->capabilities & CAP_INFOLEVEL_PASSTHRU)
-+		    pSMB->InformationLevel =
-+		        cpu_to_le16(SMB_SET_FILE_END_OF_FILE_INFO2);
-+	    else
-+		    pSMB->InformationLevel =
-+		        cpu_to_le16(SMB_SET_FILE_END_OF_FILE_INFO);
-+	}
-+	pSMB->Reserved4 = 0;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1,
-+		     ("Send error in SetFileInfo (SetFileSize) = %d",
-+		      rc));
-+	}
-+
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	/* Note: On -EAGAIN error only caller can retry on handle based calls 
-+		since file handle passed in no longer valid */
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBSetTimes(int xid, struct cifsTconInfo *tcon, char *fileName,
-+		FILE_BASIC_INFO * data, const struct nls_table *nls_codepage)
-+{
-+	TRANSACTION2_SPI_REQ *pSMB = NULL;
-+	TRANSACTION2_SPI_RSP *pSMBr = NULL;
-+	int name_len;
-+	int rc = 0;
-+	int bytes_returned = 0;
-+	char *data_offset;
-+
-+	cFYI(1, ("In SetTimes"));
-+
-+SetTimesRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->FileName, fileName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(fileName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->FileName, fileName, name_len);
-+	}
-+
-+	pSMB->ParameterCount = 6 + name_len;
-+	pSMB->DataCount = sizeof (FILE_BASIC_INFO);
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	pSMB->MaxDataCount = cpu_to_le16(1000);	/* BB find exact max SMB PDU from sess structure BB */
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = offsetof(struct smb_com_transaction2_spi_req,
-+                                     InformationLevel) - 4;
-+	pSMB->DataOffset = pSMB->ParameterOffset + pSMB->ParameterCount;
-+	data_offset = (char *) (&pSMB->hdr.Protocol) + pSMB->DataOffset;
-+	pSMB->ParameterOffset = cpu_to_le16(pSMB->ParameterOffset);
-+	pSMB->DataOffset = cpu_to_le16(pSMB->DataOffset);
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_SET_PATH_INFORMATION);
-+	pSMB->ByteCount = 3 /* pad */  + pSMB->ParameterCount + pSMB->DataCount;
-+
-+	pSMB->DataCount = cpu_to_le16(pSMB->DataCount);
-+	pSMB->ParameterCount = cpu_to_le16(pSMB->ParameterCount);
-+	pSMB->TotalDataCount = pSMB->DataCount;
-+	pSMB->TotalParameterCount = pSMB->ParameterCount;
-+	if (tcon->ses->capabilities & CAP_INFOLEVEL_PASSTHRU)
-+		pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_BASIC_INFO2);
-+	else
-+		pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_BASIC_INFO);
-+	pSMB->Reserved4 = 0;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	memcpy(data_offset, data, sizeof (FILE_BASIC_INFO));
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("SetPathInfo (times) returned %d", rc));
-+	}
-+
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+
-+	if (rc == -EAGAIN)
-+		goto SetTimesRetry;
-+
-+	return rc;
-+}
-+
-+int
-+CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *tcon,
-+		    char *fileName, __u64 mode, __u64 uid, __u64 gid,
-+		    dev_t device, const struct nls_table *nls_codepage)
-+{
-+	TRANSACTION2_SPI_REQ *pSMB = NULL;
-+	TRANSACTION2_SPI_RSP *pSMBr = NULL;
-+	int name_len;
-+	int rc = 0;
-+	int bytes_returned = 0;
-+	FILE_UNIX_BASIC_INFO *data_offset;
-+
-+	cFYI(1, ("In SetUID/GID/Mode"));
-+setPermsRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->FileName, fileName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(fileName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->FileName, fileName, name_len);
-+	}
-+
-+	pSMB->ParameterCount = 6 + name_len;
-+	pSMB->DataCount = sizeof (FILE_UNIX_BASIC_INFO);
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	pSMB->MaxDataCount = cpu_to_le16(1000);	/* BB find exact max SMB PDU from sess structure BB */
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = offsetof(struct smb_com_transaction2_spi_req,
-+                                     InformationLevel) - 4;
-+	pSMB->DataOffset = pSMB->ParameterOffset + pSMB->ParameterCount;
-+	data_offset =
-+	    (FILE_UNIX_BASIC_INFO *) ((char *) &pSMB->hdr.Protocol +
-+				      pSMB->DataOffset);
-+	pSMB->DataOffset = cpu_to_le16(pSMB->DataOffset);
-+	pSMB->ParameterOffset = cpu_to_le16(pSMB->ParameterOffset);
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_SET_PATH_INFORMATION);
-+	pSMB->ByteCount = 3 /* pad */  + pSMB->ParameterCount + pSMB->DataCount;
-+	pSMB->ParameterCount = cpu_to_le16(pSMB->ParameterCount);
-+	pSMB->DataCount = cpu_to_le16(pSMB->DataCount);
-+	pSMB->TotalParameterCount = pSMB->ParameterCount;
-+	pSMB->TotalDataCount = pSMB->DataCount;
-+	pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_BASIC);
-+	pSMB->Reserved4 = 0;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	data_offset->Uid = cpu_to_le64(uid);
-+	data_offset->Gid = cpu_to_le64(gid);
-+	/* better to leave device as zero when it is  */
-+	data_offset->DevMajor = cpu_to_le64(MAJOR(device));
-+	data_offset->DevMinor = cpu_to_le64(MINOR(device));
-+	data_offset->Permissions = cpu_to_le64(mode);
-+    
-+	if(S_ISREG(mode))
-+		data_offset->Type = cpu_to_le32(UNIX_FILE);
-+	else if(S_ISDIR(mode))
-+		data_offset->Type = cpu_to_le32(UNIX_DIR);
-+	else if(S_ISLNK(mode))
-+		data_offset->Type = cpu_to_le32(UNIX_SYMLINK);
-+	else if(S_ISCHR(mode))
-+		data_offset->Type = cpu_to_le32(UNIX_CHARDEV);
-+	else if(S_ISBLK(mode))
-+		data_offset->Type = cpu_to_le32(UNIX_BLOCKDEV);
-+	else if(S_ISFIFO(mode))
-+		data_offset->Type = cpu_to_le32(UNIX_FIFO);
-+	else if(S_ISSOCK(mode))
-+		data_offset->Type = cpu_to_le32(UNIX_SOCKET);
-+
-+
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("SetPathInfo (perms) returned %d", rc));
-+	}
-+
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	if (rc == -EAGAIN)
-+		goto setPermsRetry;
-+	return rc;
-+}
-+
-+int CIFSSMBNotify(const int xid, struct cifsTconInfo *tcon, 
-+			const int notify_subdirs, const __u16 netfid,
-+			__u32 filter, const struct nls_table *nls_codepage)
-+{
-+	int rc = 0;
-+	struct smb_com_transaction_change_notify_req * pSMB = NULL;
-+	struct smb_com_transaction_change_notify_rsp * pSMBr = NULL;
-+	int bytes_returned;
-+
-+	cFYI(1, ("In CIFSSMBNotify for file handle %d",(int)netfid));
-+	rc = smb_init(SMB_COM_NT_TRANSACT, 23, tcon, (void **) &pSMB,
-+                      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	pSMB->TotalParameterCount = 0 ;
-+	pSMB->TotalDataCount = 0;
-+	pSMB->MaxParameterCount = cpu_to_le32(2);
-+	/* BB find exact data count max from sess structure BB */
-+	pSMB->MaxDataCount = 0; /* same in little endian or be */
-+	pSMB->MaxSetupCount = 4;
-+	pSMB->Reserved = 0;
-+	pSMB->ParameterOffset = 0;
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->SetupCount = 4; /* single byte does not need le conversion */
-+	pSMB->SubCommand = cpu_to_le16(NT_TRANSACT_NOTIFY_CHANGE);
-+	pSMB->ParameterCount = pSMB->TotalParameterCount;
-+	if(notify_subdirs)
-+		pSMB->WatchTree = 1; /* one byte - no le conversion needed */
-+	pSMB->Reserved2 = 0;
-+	pSMB->CompletionFilter = cpu_to_le32(filter);
-+	pSMB->Fid = netfid; /* file handle always le */
-+	pSMB->ByteCount = 0;
-+
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			(struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Error in Notify = %d", rc));
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+/*		if (rc == -EAGAIN)
-+			goto NotifyRetry; */
-+	return rc;	
-+}
-+#ifdef CONFIG_CIFS_XATTR
-+int
-+CIFSSMBQAllEAs(const int xid, struct cifsTconInfo *tcon,
-+		 const unsigned char *searchName,
-+		 char * EAData, size_t size,
-+		 const struct nls_table *nls_codepage)
-+{
-+		/* BB assumes one setup word */
-+	TRANSACTION2_QPI_REQ *pSMB = NULL;
-+	TRANSACTION2_QPI_RSP *pSMBr = NULL;
-+	int rc = 0;
-+	int bytes_returned;
-+	int name_len;
-+
-+	cFYI(1, ("In Query All EAs path %s", searchName));
-+QAllEAsRetry:
-+	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-+		      (void **) &pSMBr);
-+	if (rc)
-+		return rc;
-+
-+	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-+		name_len =
-+		    cifs_strtoUCS((wchar_t *) pSMB->FileName, searchName, 530
-+				  /* find define for this maxpathcomponent */
-+				  , nls_codepage);
-+		name_len++;	/* trailing null */
-+		name_len *= 2;
-+	} else {		/* BB improve the check for buffer overruns BB */
-+		name_len = strnlen(searchName, 530);
-+		name_len++;	/* trailing null */
-+		strncpy(pSMB->FileName, searchName, name_len);
-+	}
-+
-+	pSMB->TotalParameterCount = 2 /* level */  + 4 /* reserved */  +
-+	    name_len /* includes null */ ;
-+	pSMB->TotalDataCount = 0;
-+	pSMB->MaxParameterCount = cpu_to_le16(2);
-+	pSMB->MaxDataCount = cpu_to_le16(4000);	/* BB find exact max SMB PDU from sess structure BB */
-+	pSMB->MaxSetupCount = 0;
-+	pSMB->Reserved = 0;
-+	pSMB->Flags = 0;
-+	pSMB->Timeout = 0;
-+	pSMB->Reserved2 = 0;
-+	pSMB->ParameterOffset = cpu_to_le16(offsetof(
-+        struct smb_com_transaction2_qpi_req ,InformationLevel) - 4);
-+	pSMB->DataCount = 0;
-+	pSMB->DataOffset = 0;
-+	pSMB->SetupCount = 1;
-+	pSMB->Reserved3 = 0;
-+	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_PATH_INFORMATION);
-+	pSMB->ByteCount = pSMB->TotalParameterCount + 1 /* pad */ ;
-+	pSMB->TotalParameterCount = cpu_to_le16(pSMB->TotalParameterCount);
-+	pSMB->ParameterCount = pSMB->TotalParameterCount;
-+	pSMB->InformationLevel = cpu_to_le16(SMB_INFO_QUERY_ALL_EAS);
-+	pSMB->Reserved4 = 0;
-+	pSMB->hdr.smb_buf_length += pSMB->ByteCount;
-+	pSMB->ByteCount = cpu_to_le16(pSMB->ByteCount);
-+
-+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-+			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-+	if (rc) {
-+		cFYI(1, ("Send error in QueryAllEAs = %d", rc));
-+	} else {		/* decode response */
-+		pSMBr->DataOffset = le16_to_cpu(pSMBr->DataOffset);
-+		/* BB also check enough total bytes returned */
-+		/* BB we need to improve the validity checking
-+		of these trans2 responses */
-+		if ((pSMBr->ByteCount < 4) || (pSMBr->DataOffset > 512)) 
-+			rc = -EIO;	/* bad smb */
-+	   /* else if (pFindData){
-+			memcpy((char *) pFindData,
-+			       (char *) &pSMBr->hdr.Protocol +
-+			       pSMBr->DataOffset, kl);
-+		}*/ else {
-+			/* check that length of list is not more than bcc */
-+			/* check that each entry does not go beyond length
-+			   of list */
-+			/* check that each element of each entry does not
-+			   go beyond end of list */
-+			struct fealist * ea_response_data;
-+			rc = 0;
-+			/* validate_trans2_offsets() */
-+			/* BB to check if(start of smb + pSMBr->DataOffset > &bcc+ bcc)*/
-+			ea_response_data = (struct fealist *)
-+				(((char *) &pSMBr->hdr.Protocol) +
-+				pSMBr->DataOffset);
-+			cFYI(1,("ea length %d",ea_response_data->list_len));
-+		}
-+	}
-+	if (pSMB)
-+		cifs_buf_release(pSMB);
-+	if (rc == -EAGAIN)
-+		goto QAllEAsRetry;
-+
-+	return rc;
-+}
-+#endif
-diff -urN linux-2.4.29.old/fs/cifs/cifs_unicode.c linux-2.4.29/fs/cifs/cifs_unicode.c
---- linux-2.4.29.old/fs/cifs/cifs_unicode.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifs_unicode.c	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,87 @@
-+/*
-+ *   fs/cifs/cifs_unicode.c
-+ *
-+ *   Copyright (c) International Business Machines  Corp., 2000,2002
-+ *   Modified by Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This program is free software;  you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; either version 2 of the License, or 
-+ *   (at your option) any later version.
-+ * 
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program;  if not, write to the Free Software 
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/fs.h>
-+#include "cifs_unicode.h"
-+#include "cifs_uniupr.h"
-+#include "cifspdu.h"
-+#include "cifs_debug.h"
-+
-+/*
-+ * NAME:	cifs_strfromUCS()
-+ *
-+ * FUNCTION:	Convert little-endian unicode string to character string
-+ *
-+ */
-+int
-+cifs_strfromUCS_le(char *to, const wchar_t * from,	/* LITTLE ENDIAN */
-+		   int len, const struct nls_table *codepage)
-+{
-+	int i;
-+	int outlen = 0;
-+
-+	for (i = 0; (i < len) && from[i]; i++) {
-+		int charlen;
-+		/* 2.4.0 kernel or greater */
-+		charlen =
-+		    codepage->uni2char(le16_to_cpu(from[i]), &to[outlen],
-+				       NLS_MAX_CHARSET_SIZE);
-+		if (charlen > 0) {
-+			outlen += charlen;
-+		} else {
-+			to[outlen++] = '?';
-+		}
-+	}
-+	to[outlen] = 0;
-+	return outlen;
-+}
-+
-+/*
-+ * NAME:	cifs_strtoUCS()
-+ *
-+ * FUNCTION:	Convert character string to unicode string
-+ *
-+ */
-+int
-+cifs_strtoUCS(wchar_t * to, const char *from, int len,
-+	      const struct nls_table *codepage)
-+{
-+	int charlen;
-+	int i;
-+
-+	for (i = 0; len && *from; i++, from += charlen, len -= charlen) {
-+
-+		/* works for 2.4.0 kernel or later */
-+		charlen = codepage->char2uni(from, len, &to[i]);
-+		if (charlen < 1) {
-+			cERROR(1,
-+			       ("cifs_strtoUCS: char2uni returned %d",
-+				charlen));
-+			to[i] = cpu_to_le16(0x003f);	/* a question mark */
-+			charlen = 1;
-+		}
-+		to[i] = cpu_to_le16(to[i]);
-+
-+	}
-+
-+	to[i] = 0;
-+	return i;
-+}
-+
-diff -urN linux-2.4.29.old/fs/cifs/cifs_unicode.h linux-2.4.29/fs/cifs/cifs_unicode.h
---- linux-2.4.29.old/fs/cifs/cifs_unicode.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifs_unicode.h	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,353 @@
-+/*
-+ * cifs_unicode:  Unicode kernel case support
-+ *
-+ * Function:
-+ *     Convert a unicode character to upper or lower case using
-+ *     compressed tables.
-+ *
-+ *   Copyright (c) International Business Machines  Corp., 2000,2002
-+ *
-+ *   This program is free software;  you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; either version 2 of the License, or 
-+ *   (at your option) any later version.
-+ * 
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program;  if not, write to the Free Software 
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ *
-+ * Notes:
-+ *     These APIs are based on the C library functions.  The semantics
-+ *     should match the C functions but with expanded size operands.
-+ *
-+ *     The upper/lower functions are based on a table created by mkupr.
-+ *     This is a compressed table of upper and lower case conversion.
-+ *
-+ */
-+
-+#include <asm/byteorder.h>
-+#include <linux/types.h>
-+#include <linux/nls.h>
-+
-+#define  UNIUPR_NOLOWER		/* Example to not expand lower case tables */
-+
-+/* Just define what we want from uniupr.h.  We don't want to define the tables
-+ * in each source file.
-+ */
-+#ifndef	UNICASERANGE_DEFINED
-+struct UniCaseRange {
-+	wchar_t start;
-+	wchar_t end;
-+	signed char *table;
-+};
-+#endif				/* UNICASERANGE_DEFINED */
-+
-+#ifndef UNIUPR_NOUPPER
-+extern signed char CifsUniUpperTable[512];
-+extern const struct UniCaseRange CifsUniUpperRange[];
-+#endif				/* UNIUPR_NOUPPER */
-+
-+#ifndef UNIUPR_NOLOWER
-+extern signed char UniLowerTable[512];
-+extern struct UniCaseRange UniLowerRange[];
-+#endif				/* UNIUPR_NOLOWER */
-+
-+#ifdef __KERNEL__
-+int cifs_strfromUCS_le(char *, const wchar_t *, int, const struct nls_table *);
-+int cifs_strtoUCS(wchar_t *, const char *, int, const struct nls_table *);
-+#endif
-+
-+/*
-+ * UniStrcat:  Concatenate the second string to the first
-+ *
-+ * Returns:
-+ *     Address of the first string
-+ */
-+static inline wchar_t *
-+UniStrcat(wchar_t * ucs1, const wchar_t * ucs2)
-+{
-+	wchar_t *anchor = ucs1;	/* save a pointer to start of ucs1 */
-+
-+	while (*ucs1++) ;	/* To end of first string */
-+	ucs1--;			/* Return to the null */
-+	while ((*ucs1++ = *ucs2++)) ;	/* copy string 2 over */
-+	return anchor;
-+}
-+
-+/*
-+ * UniStrchr:  Find a character in a string
-+ *
-+ * Returns:
-+ *     Address of first occurrence of character in string
-+ *     or NULL if the character is not in the string
-+ */
-+static inline wchar_t *
-+UniStrchr(const wchar_t * ucs, wchar_t uc)
-+{
-+	while ((*ucs != uc) && *ucs)
-+		ucs++;
-+
-+	if (*ucs == uc)
-+		return (wchar_t *) ucs;
-+	return NULL;
-+}
-+
-+/*
-+ * UniStrcmp:  Compare two strings
-+ *
-+ * Returns:
-+ *     < 0:  First string is less than second
-+ *     = 0:  Strings are equal
-+ *     > 0:  First string is greater than second
-+ */
-+static inline int
-+UniStrcmp(const wchar_t * ucs1, const wchar_t * ucs2)
-+{
-+	while ((*ucs1 == *ucs2) && *ucs1) {
-+		ucs1++;
-+		ucs2++;
-+	}
-+	return (int) *ucs1 - (int) *ucs2;
-+}
-+
-+/*
-+ * UniStrcpy:  Copy a string
-+ */
-+static inline wchar_t *
-+UniStrcpy(wchar_t * ucs1, const wchar_t * ucs2)
-+{
-+	wchar_t *anchor = ucs1;	/* save the start of result string */
-+
-+	while ((*ucs1++ = *ucs2++)) ;
-+	return anchor;
-+}
-+
-+/*
-+ * UniStrlen:  Return the length of a string (in 16 bit Unicode chars not bytes)
-+ */
-+static inline size_t
-+UniStrlen(const wchar_t * ucs1)
-+{
-+	int i = 0;
-+
-+	while (*ucs1++)
-+		i++;
-+	return i;
-+}
-+
-+/*
-+ * UniStrnlen:  Return the length (in 16 bit Unicode chars not bytes) of a string (length limited)
-+ */
-+static inline size_t
-+UniStrnlen(const wchar_t * ucs1, int maxlen)
-+{
-+	int i = 0;
-+
-+	while (*ucs1++) {
-+		i++;
-+		if (i >= maxlen)
-+			break;
-+	}
-+	return i;
-+}
-+
-+/*
-+ * UniStrncat:  Concatenate length limited string
-+ */
-+static inline wchar_t *
-+UniStrncat(wchar_t * ucs1, const wchar_t * ucs2, size_t n)
-+{
-+	wchar_t *anchor = ucs1;	/* save pointer to string 1 */
-+
-+	while (*ucs1++) ;
-+	ucs1--;			/* point to null terminator of s1 */
-+	while (n-- && (*ucs1 = *ucs2)) {	/* copy s2 after s1 */
-+		ucs1++;
-+		ucs2++;
-+	}
-+	*ucs1 = 0;		/* Null terminate the result */
-+	return (anchor);
-+}
-+
-+/*
-+ * UniStrncmp:  Compare length limited string
-+ */
-+static inline int
-+UniStrncmp(const wchar_t * ucs1, const wchar_t * ucs2, size_t n)
-+{
-+	if (!n)
-+		return 0;	/* Null strings are equal */
-+	while ((*ucs1 == *ucs2) && *ucs1 && --n) {
-+		ucs1++;
-+		ucs2++;
-+	}
-+	return (int) *ucs1 - (int) *ucs2;
-+}
-+
-+/*
-+ * UniStrncmp_le:  Compare length limited string - native to little-endian
-+ */
-+static inline int
-+UniStrncmp_le(const wchar_t * ucs1, const wchar_t * ucs2, size_t n)
-+{
-+	if (!n)
-+		return 0;	/* Null strings are equal */
-+	while ((*ucs1 == __le16_to_cpu(*ucs2)) && *ucs1 && --n) {
-+		ucs1++;
-+		ucs2++;
-+	}
-+	return (int) *ucs1 - (int) __le16_to_cpu(*ucs2);
-+}
-+
-+/*
-+ * UniStrncpy:  Copy length limited string with pad
-+ */
-+static inline wchar_t *
-+UniStrncpy(wchar_t * ucs1, const wchar_t * ucs2, size_t n)
-+{
-+	wchar_t *anchor = ucs1;
-+
-+	while (n-- && *ucs2)	/* Copy the strings */
-+		*ucs1++ = *ucs2++;
-+
-+	n++;
-+	while (n--)		/* Pad with nulls */
-+		*ucs1++ = 0;
-+	return anchor;
-+}
-+
-+/*
-+ * UniStrncpy_le:  Copy length limited string with pad to little-endian
-+ */
-+static inline wchar_t *
-+UniStrncpy_le(wchar_t * ucs1, const wchar_t * ucs2, size_t n)
-+{
-+	wchar_t *anchor = ucs1;
-+
-+	while (n-- && *ucs2)	/* Copy the strings */
-+		*ucs1++ = __le16_to_cpu(*ucs2++);
-+
-+	n++;
-+	while (n--)		/* Pad with nulls */
-+		*ucs1++ = 0;
-+	return anchor;
-+}
-+
-+/*
-+ * UniStrstr:  Find a string in a string
-+ *
-+ * Returns:
-+ *     Address of first match found
-+ *     NULL if no matching string is found
-+ */
-+static inline wchar_t *
-+UniStrstr(const wchar_t * ucs1, const wchar_t * ucs2)
-+{
-+	const wchar_t *anchor1 = ucs1;
-+	const wchar_t *anchor2 = ucs2;
-+
-+	while (*ucs1) {
-+		if (*ucs1 == *ucs2) {	/* Partial match found */
-+			ucs1++;
-+			ucs2++;
-+		} else {
-+			if (!*ucs2)	/* Match found */
-+				return (wchar_t *) anchor1;
-+			ucs1 = ++anchor1;	/* No match */
-+			ucs2 = anchor2;
-+		}
-+	}
-+
-+	if (!*ucs2)		/* Both end together */
-+		return (wchar_t *) anchor1;	/* Match found */
-+	return NULL;		/* No match */
-+}
-+
-+#ifndef UNIUPR_NOUPPER
-+/*
-+ * UniToupper:  Convert a unicode character to upper case
-+ */
-+static inline wchar_t
-+UniToupper(register wchar_t uc)
-+{
-+	register const struct UniCaseRange *rp;
-+
-+	if (uc < sizeof (CifsUniUpperTable)) {	/* Latin characters */
-+		return uc + CifsUniUpperTable[uc];	/* Use base tables */
-+	} else {
-+		rp = CifsUniUpperRange;	/* Use range tables */
-+		while (rp->start) {
-+			if (uc < rp->start)	/* Before start of range */
-+				return uc;	/* Uppercase = input */
-+			if (uc <= rp->end)	/* In range */
-+				return uc + rp->table[uc - rp->start];
-+			rp++;	/* Try next range */
-+		}
-+	}
-+	return uc;		/* Past last range */
-+}
-+
-+/*
-+ * UniStrupr:  Upper case a unicode string
-+ */
-+static inline wchar_t *
-+UniStrupr(register wchar_t * upin)
-+{
-+	register wchar_t *up;
-+
-+	up = upin;
-+	while (*up) {		/* For all characters */
-+		*up = UniToupper(*up);
-+		up++;
-+	}
-+	return upin;		/* Return input pointer */
-+}
-+#endif				/* UNIUPR_NOUPPER */
-+
-+#ifndef UNIUPR_NOLOWER
-+/*
-+ * UniTolower:  Convert a unicode character to lower case
-+ */
-+static inline wchar_t
-+UniTolower(wchar_t uc)
-+{
-+	register struct UniCaseRange *rp;
-+
-+	if (uc < sizeof (UniLowerTable)) {	/* Latin characters */
-+		return uc + UniLowerTable[uc];	/* Use base tables */
-+	} else {
-+		rp = UniLowerRange;	/* Use range tables */
-+		while (rp->start) {
-+			if (uc < rp->start)	/* Before start of range */
-+				return uc;	/* Uppercase = input */
-+			if (uc <= rp->end)	/* In range */
-+				return uc + rp->table[uc - rp->start];
-+			rp++;	/* Try next range */
-+		}
-+	}
-+	return uc;		/* Past last range */
-+}
-+
-+/*
-+ * UniStrlwr:  Lower case a unicode string
-+ */
-+static inline wchar_t *
-+UniStrlwr(register wchar_t * upin)
-+{
-+	register wchar_t *up;
-+
-+	up = upin;
-+	while (*up) {		/* For all characters */
-+		*up = UniTolower(*up);
-+		up++;
-+	}
-+	return upin;		/* Return input pointer */
-+}
-+
-+#endif
-diff -urN linux-2.4.29.old/fs/cifs/cifs_uniupr.h linux-2.4.29/fs/cifs/cifs_uniupr.h
---- linux-2.4.29.old/fs/cifs/cifs_uniupr.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/cifs_uniupr.h	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,253 @@
-+/*
-+ *   Copyright (c) International Business Machines  Corp., 2000,2002
-+ *
-+ *   This program is free software;  you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; either version 2 of the License, or 
-+ *   (at your option) any later version.
-+ * 
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program;  if not, write to the Free Software 
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * uniupr.h - Unicode compressed case ranges
-+ *
-+*/
-+
-+#ifndef UNIUPR_NOUPPER
-+/*
-+ * Latin upper case
-+ */
-+signed char CifsUniUpperTable[512] = {
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 000-00f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 010-01f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 020-02f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 030-03f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 040-04f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 050-05f */
-+	0, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32,	/* 060-06f */
-+	-32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, 0, 0, 0, 0, 0,	/* 070-07f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 080-08f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 090-09f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0a0-0af */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0b0-0bf */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0c0-0cf */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0d0-0df */
-+	-32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32,	/* 0e0-0ef */
-+	-32, -32, -32, -32, -32, -32, -32, 0, -32, -32, -32, -32, -32, -32, -32, 121,	/* 0f0-0ff */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 100-10f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 110-11f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 120-12f */
-+	0, 0, 0, -1, 0, -1, 0, -1, 0, 0, -1, 0, -1, 0, -1, 0,	/* 130-13f */
-+	-1, 0, -1, 0, -1, 0, -1, 0, -1, 0, 0, -1, 0, -1, 0, -1,	/* 140-14f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 150-15f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 160-16f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, 0, -1, 0, -1, 0, -1, 0,	/* 170-17f */
-+	0, 0, 0, -1, 0, -1, 0, 0, -1, 0, 0, 0, -1, 0, 0, 0,	/* 180-18f */
-+	0, 0, -1, 0, 0, 0, 0, 0, 0, -1, 0, 0, 0, 0, 0, 0,	/* 190-19f */
-+	0, -1, 0, -1, 0, -1, 0, 0, -1, 0, 0, 0, 0, -1, 0, 0,	/* 1a0-1af */
-+	-1, 0, 0, 0, -1, 0, -1, 0, 0, -1, 0, 0, 0, -1, 0, 0,	/* 1b0-1bf */
-+	0, 0, 0, 0, 0, -1, -2, 0, -1, -2, 0, -1, -2, 0, -1, 0,	/* 1c0-1cf */
-+	-1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, -79, 0, -1,	/* 1d0-1df */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1e0-1ef */
-+	0, 0, -1, -2, 0, -1, 0, 0, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1f0-1ff */
-+};
-+
-+/* Upper case range - Greek */
-+static signed char UniCaseRangeU03a0[47] = {
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -38, -37, -37, -37,	/* 3a0-3af */
-+	0, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32,	/* 3b0-3bf */
-+	-32, -32, -31, -32, -32, -32, -32, -32, -32, -32, -32, -32, -64,
-+	-63, -63,
-+};
-+
-+/* Upper case range - Cyrillic */
-+static signed char UniCaseRangeU0430[48] = {
-+	-32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32,	/* 430-43f */
-+	-32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32,	/* 440-44f */
-+	0, -80, -80, -80, -80, -80, -80, -80, -80, -80, -80, -80, -80, 0, -80, -80,	/* 450-45f */
-+};
-+
-+/* Upper case range - Extended cyrillic */
-+static signed char UniCaseRangeU0490[61] = {
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 490-49f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 4a0-4af */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 4b0-4bf */
-+	0, 0, -1, 0, -1, 0, 0, 0, -1, 0, 0, 0, -1,
-+};
-+
-+/* Upper case range - Extended latin and greek */
-+static signed char UniCaseRangeU1e00[509] = {
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1e00-1e0f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1e10-1e1f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1e20-1e2f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1e30-1e3f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1e40-1e4f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1e50-1e5f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1e60-1e6f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1e70-1e7f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1e80-1e8f */
-+	0, -1, 0, -1, 0, -1, 0, 0, 0, 0, 0, -59, 0, -1, 0, -1,	/* 1e90-1e9f */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1ea0-1eaf */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1eb0-1ebf */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1ec0-1ecf */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1ed0-1edf */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, -1,	/* 1ee0-1eef */
-+	0, -1, 0, -1, 0, -1, 0, -1, 0, -1, 0, 0, 0, 0, 0, 0,	/* 1ef0-1eff */
-+	8, 8, 8, 8, 8, 8, 8, 8, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1f00-1f0f */
-+	8, 8, 8, 8, 8, 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1f10-1f1f */
-+	8, 8, 8, 8, 8, 8, 8, 8, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1f20-1f2f */
-+	8, 8, 8, 8, 8, 8, 8, 8, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1f30-1f3f */
-+	8, 8, 8, 8, 8, 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1f40-1f4f */
-+	0, 8, 0, 8, 0, 8, 0, 8, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1f50-1f5f */
-+	8, 8, 8, 8, 8, 8, 8, 8, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1f60-1f6f */
-+	74, 74, 86, 86, 86, 86, 100, 100, 0, 0, 112, 112, 126, 126, 0, 0,	/* 1f70-1f7f */
-+	8, 8, 8, 8, 8, 8, 8, 8, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1f80-1f8f */
-+	8, 8, 8, 8, 8, 8, 8, 8, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1f90-1f9f */
-+	8, 8, 8, 8, 8, 8, 8, 8, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1fa0-1faf */
-+	8, 8, 0, 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1fb0-1fbf */
-+	0, 0, 0, 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1fc0-1fcf */
-+	8, 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1fd0-1fdf */
-+	8, 8, 0, 0, 0, 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1fe0-1fef */
-+	0, 0, 0, 9, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-+};
-+
-+/* Upper case range - Wide latin */
-+static signed char UniCaseRangeUff40[27] = {
-+	0, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32,	/* ff40-ff4f */
-+	-32, -32, -32, -32, -32, -32, -32, -32, -32, -32, -32,
-+};
-+
-+/*
-+ * Upper Case Range
-+ */
-+const struct UniCaseRange CifsUniUpperRange[] = {
-+	{0x03a0, 0x03ce, UniCaseRangeU03a0},
-+	{0x0430, 0x045f, UniCaseRangeU0430},
-+	{0x0490, 0x04cc, UniCaseRangeU0490},
-+	{0x1e00, 0x1ffc, UniCaseRangeU1e00},
-+	{0xff40, 0xff5a, UniCaseRangeUff40},
-+	{0, 0, NULL}
-+};
-+#endif
-+
-+#ifndef UNIUPR_NOLOWER
-+/*
-+ * Latin lower case
-+ */
-+static signed char CifsUniLowerTable[512] = {
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 000-00f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 010-01f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 020-02f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 030-03f */
-+	0, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32,	/* 040-04f */
-+	32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 0, 0, 0, 0, 0,	/* 050-05f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 060-06f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 070-07f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 080-08f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 090-09f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0a0-0af */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0b0-0bf */
-+	32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32,	/* 0c0-0cf */
-+	32, 32, 32, 32, 32, 32, 32, 0, 32, 32, 32, 32, 32, 32, 32, 0,	/* 0d0-0df */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0e0-0ef */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0f0-0ff */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 100-10f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 110-11f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 120-12f */
-+	0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 1, 0, 1, 0, 1,	/* 130-13f */
-+	0, 1, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 1, 0, 1, 0,	/* 140-14f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 150-15f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 160-16f */
-+	1, 0, 1, 0, 1, 0, 1, 0, -121, 1, 0, 1, 0, 1, 0, 0,	/* 170-17f */
-+	0, 0, 1, 0, 1, 0, 0, 1, 0, 0, 0, 1, 0, 0, 79, 0,	/* 180-18f */
-+	0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,	/* 190-19f */
-+	1, 0, 1, 0, 1, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0, 1,	/* 1a0-1af */
-+	0, 0, 0, 1, 0, 1, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0,	/* 1b0-1bf */
-+	0, 0, 0, 0, 2, 1, 0, 2, 1, 0, 2, 1, 0, 1, 0, 1,	/* 1c0-1cf */
-+	0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0,	/* 1d0-1df */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1e0-1ef */
-+	0, 2, 1, 0, 1, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1f0-1ff */
-+};
-+
-+/* Lower case range - Greek */
-+static signed char UniCaseRangeL0380[44] = {
-+	0, 0, 0, 0, 0, 0, 38, 0, 37, 37, 37, 0, 64, 0, 63, 63,	/* 380-38f */
-+	0, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32,	/* 390-39f */
-+	32, 32, 0, 32, 32, 32, 32, 32, 32, 32, 32, 32,
-+};
-+
-+/* Lower case range - Cyrillic */
-+static signed char UniCaseRangeL0400[48] = {
-+	0, 80, 80, 80, 80, 80, 80, 80, 80, 80, 80, 80, 80, 0, 80, 80,	/* 400-40f */
-+	32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32,	/* 410-41f */
-+	32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32,	/* 420-42f */
-+};
-+
-+/* Lower case range - Extended cyrillic */
-+static signed char UniCaseRangeL0490[60] = {
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 490-49f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 4a0-4af */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 4b0-4bf */
-+	0, 1, 0, 1, 0, 0, 0, 1, 0, 0, 0, 1,
-+};
-+
-+/* Lower case range - Extended latin and greek */
-+static signed char UniCaseRangeL1e00[504] = {
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1e00-1e0f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1e10-1e1f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1e20-1e2f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1e30-1e3f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1e40-1e4f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1e50-1e5f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1e60-1e6f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1e70-1e7f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1e80-1e8f */
-+	1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,	/* 1e90-1e9f */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1ea0-1eaf */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1eb0-1ebf */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1ec0-1ecf */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1ed0-1edf */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0,	/* 1ee0-1eef */
-+	1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0,	/* 1ef0-1eff */
-+	0, 0, 0, 0, 0, 0, 0, 0, -8, -8, -8, -8, -8, -8, -8, -8,	/* 1f00-1f0f */
-+	0, 0, 0, 0, 0, 0, 0, 0, -8, -8, -8, -8, -8, -8, 0, 0,	/* 1f10-1f1f */
-+	0, 0, 0, 0, 0, 0, 0, 0, -8, -8, -8, -8, -8, -8, -8, -8,	/* 1f20-1f2f */
-+	0, 0, 0, 0, 0, 0, 0, 0, -8, -8, -8, -8, -8, -8, -8, -8,	/* 1f30-1f3f */
-+	0, 0, 0, 0, 0, 0, 0, 0, -8, -8, -8, -8, -8, -8, 0, 0,	/* 1f40-1f4f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, -8, 0, -8, 0, -8, 0, -8,	/* 1f50-1f5f */
-+	0, 0, 0, 0, 0, 0, 0, 0, -8, -8, -8, -8, -8, -8, -8, -8,	/* 1f60-1f6f */
-+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 1f70-1f7f */
-+	0, 0, 0, 0, 0, 0, 0, 0, -8, -8, -8, -8, -8, -8, -8, -8,	/* 1f80-1f8f */
-+	0, 0, 0, 0, 0, 0, 0, 0, -8, -8, -8, -8, -8, -8, -8, -8,	/* 1f90-1f9f */
-+	0, 0, 0, 0, 0, 0, 0, 0, -8, -8, -8, -8, -8, -8, -8, -8,	/* 1fa0-1faf */
-+	0, 0, 0, 0, 0, 0, 0, 0, -8, -8, -74, -74, -9, 0, 0, 0,	/* 1fb0-1fbf */
-+	0, 0, 0, 0, 0, 0, 0, 0, -86, -86, -86, -86, -9, 0, 0, 0,	/* 1fc0-1fcf */
-+	0, 0, 0, 0, 0, 0, 0, 0, -8, -8, -100, -100, 0, 0, 0, 0,	/* 1fd0-1fdf */
-+	0, 0, 0, 0, 0, 0, 0, 0, -8, -8, -112, -112, -7, 0, 0, 0,	/* 1fe0-1fef */
-+	0, 0, 0, 0, 0, 0, 0, 0,
-+};
-+
-+/* Lower case range - Wide latin */
-+static signed char UniCaseRangeLff20[27] = {
-+	0, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32,	/* ff20-ff2f */
-+	32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32,
-+};
-+
-+/*
-+ * Lower Case Range
-+ */
-+const static struct UniCaseRange CifsUniLowerRange[] = {
-+	0x0380, 0x03ab, UniCaseRangeL0380,
-+	0x0400, 0x042f, UniCaseRangeL0400,
-+	0x0490, 0x04cb, UniCaseRangeL0490,
-+	0x1e00, 0x1ff7, UniCaseRangeL1e00,
-+	0xff20, 0xff3a, UniCaseRangeLff20,
-+	0, 0, 0
-+};
-+#endif
-diff -urN linux-2.4.29.old/fs/cifs/connect.c linux-2.4.29/fs/cifs/connect.c
---- linux-2.4.29.old/fs/cifs/connect.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/connect.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,2924 @@
-+/*
-+ *   fs/cifs/connect.c
-+ *
-+ *   Copyright (C) International Business Machines  Corp., 2002,2004
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 
-+ */
-+#include <linux/fs.h>
-+#include <linux/net.h>
-+#include <linux/string.h>
-+#include <linux/list.h>
-+#include <linux/wait.h>
-+#include <linux/version.h>
-+#include <linux/ipv6.h>
-+#include <linux/pagemap.h>
-+#include <linux/ctype.h>
-+#include <linux/utsname.h>
-+#include <asm/uaccess.h>
-+#include <asm/processor.h>
-+#include "cifspdu.h"
-+#include "cifsglob.h"
-+#include "cifsproto.h"
-+#include "cifs_unicode.h"
-+#include "cifs_debug.h"
-+#include "cifs_fs_sb.h"
-+#include "ntlmssp.h"
-+#include "nterr.h"
-+#include "rfc1002pdu.h"
-+
-+#define CIFS_PORT 445
-+#define RFC1001_PORT 139
-+
-+extern void SMBencrypt(unsigned char *passwd, unsigned char *c8,
-+		       unsigned char *p24);
-+extern void SMBNTencrypt(unsigned char *passwd, unsigned char *c8,
-+			 unsigned char *p24);
-+extern int cifs_inet_pton(int, const char *, void *dst);
-+
-+struct smb_vol {
-+	char *username;
-+	char *password;
-+	char *domainname;
-+	char *UNC;
-+	char *UNCip;
-+	char *iocharset;  /* local code page for mapping to and from Unicode */
-+	char source_rfc1001_name[16]; /* netbios name of client */
-+	uid_t linux_uid;
-+	gid_t linux_gid;
-+	mode_t file_mode;
-+	mode_t dir_mode;
-+	int rw:1;
-+	int retry:1;
-+	int intr:1;
-+	unsigned int rsize;
-+	unsigned int wsize;
-+	unsigned int sockopt;
-+	unsigned short int port;
-+};
-+
-+static int ipv4_connect(struct sockaddr_in *psin_server, 
-+			struct socket **csocket,
-+			char * netb_name);
-+static int ipv6_connect(struct sockaddr_in6 *psin_server, 
-+			struct socket **csocket);
-+
-+
-+	/* 
-+	 * cifs tcp session reconnection
-+	 * 
-+	 * mark tcp session as reconnecting so temporarily locked
-+	 * mark all smb sessions as reconnecting for tcp session
-+	 * reconnect tcp session
-+	 * wake up waiters on reconnection? - (not needed currently)
-+	 */
-+
-+int
-+cifs_reconnect(struct TCP_Server_Info *server)
-+{
-+	int rc = 0;
-+	struct list_head *tmp;
-+	struct cifsSesInfo *ses;
-+	struct cifsTconInfo *tcon;
-+	struct mid_q_entry * mid_entry;
-+	
-+	spin_lock(&GlobalMid_Lock);
-+	if(server->tcpStatus == CifsExiting) {
-+		/* the demux thread will exit normally 
-+		next time through the loop */
-+		spin_unlock(&GlobalMid_Lock);
-+		return rc;
-+	} else
-+		server->tcpStatus = CifsNeedReconnect;
-+	spin_unlock(&GlobalMid_Lock);
-+	server->maxBuf = 0;
-+
-+	cFYI(1, ("Reconnecting tcp session "));
-+
-+	/* before reconnecting the tcp session, mark the smb session (uid)
-+		and the tid bad so they are not used until reconnected */
-+	read_lock(&GlobalSMBSeslock);
-+	list_for_each(tmp, &GlobalSMBSessionList) {
-+		ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList);
-+		if (ses->server) {
-+			if (ses->server == server) {
-+				ses->status = CifsNeedReconnect;
-+				ses->ipc_tid = 0;
-+			}
-+		}
-+		/* else tcp and smb sessions need reconnection */
-+	}
-+	list_for_each(tmp, &GlobalTreeConnectionList) {
-+		tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
-+		if((tcon) && (tcon->ses) && (tcon->ses->server == server)) {
-+			tcon->tidStatus = CifsNeedReconnect;
-+		}
-+	}
-+	read_unlock(&GlobalSMBSeslock);
-+	/* do not want to be sending data on a socket we are freeing */
-+	down(&server->tcpSem); 
-+	if(server->ssocket) {
-+		cFYI(1,("State: 0x%x Flags: 0x%lx", server->ssocket->state,
-+			server->ssocket->flags));
-+		server->ssocket->ops->shutdown(server->ssocket,SEND_SHUTDOWN);
-+		cFYI(1,("Post shutdown state: 0x%x Flags: 0x%lx", server->ssocket->state,
-+			server->ssocket->flags));
-+		sock_release(server->ssocket);
-+		server->ssocket = NULL;
-+	}
-+
-+	spin_lock(&GlobalMid_Lock);
-+	list_for_each(tmp, &server->pending_mid_q) {
-+		mid_entry = list_entry(tmp, struct
-+					mid_q_entry,
-+					qhead);
-+		if(mid_entry) {
-+			if(mid_entry->midState == MID_REQUEST_SUBMITTED) {
-+				/* Mark other intransit requests as needing retry so 
-+				  we do not immediately mark the session bad again 
-+				  (ie after we reconnect below) as they timeout too */
-+				mid_entry->midState = MID_RETRY_NEEDED;
-+			}
-+		}
-+	}
-+	spin_unlock(&GlobalMid_Lock);
-+	up(&server->tcpSem); 
-+
-+	while ((server->tcpStatus != CifsExiting) && (server->tcpStatus != CifsGood))
-+	{
-+		if(server->protocolType == IPV6) {
-+			rc = ipv6_connect(&server->addr.sockAddr6,&server->ssocket);
-+		} else {
-+			rc = ipv4_connect(&server->addr.sockAddr, 
-+					&server->ssocket,
-+					server->workstation_RFC1001_name);
-+		}
-+		if(rc) {
-+			set_current_state(TASK_INTERRUPTIBLE);
-+			schedule_timeout(3 * HZ);
-+		} else {
-+			atomic_inc(&tcpSesReconnectCount);
-+			spin_lock(&GlobalMid_Lock);
-+			if(server->tcpStatus != CifsExiting)
-+				server->tcpStatus = CifsGood;
-+			spin_unlock(&GlobalMid_Lock);
-+	/*		atomic_set(&server->inFlight,0);*/
-+			wake_up(&server->response_q);
-+		}
-+	}
-+	return rc;
-+}
-+
-+static int
-+cifs_demultiplex_thread(struct TCP_Server_Info *server)
-+{
-+	int length;
-+	unsigned int pdu_length, total_read;
-+	struct smb_hdr *smb_buffer = NULL;
-+	struct msghdr smb_msg;
-+	mm_segment_t temp_fs;
-+	struct iovec iov;
-+	struct socket *csocket = server->ssocket;
-+	struct list_head *tmp;
-+	struct cifsSesInfo *ses;
-+	struct task_struct *task_to_wake = NULL;
-+	struct mid_q_entry *mid_entry;
-+	char *temp;
-+
-+	daemonize();
-+	sprintf(current->comm,"cifsd");
-+	/* allow_signal(SIGKILL);*/
-+	current->flags |= PF_MEMALLOC;
-+	server->tsk = current;	/* save process info to wake at shutdown */
-+	cFYI(1, ("Demultiplex PID: %d", current->pid));
-+
-+	temp_fs = get_fs();	/* we must turn off socket api parm checking */
-+	set_fs(get_ds());
-+
-+	while (server->tcpStatus != CifsExiting) {
-+		if (smb_buffer == NULL)
-+			smb_buffer = cifs_buf_get();
-+		else
-+			memset(smb_buffer, 0, sizeof (struct smb_hdr));
-+
-+		if (smb_buffer == NULL) {
-+			cERROR(1,("Can not get memory for SMB response"));
-+			set_current_state(TASK_INTERRUPTIBLE);
-+			schedule_timeout(HZ * 3); /* give system time to free memory */
-+			continue;
-+		}
-+		iov.iov_base = smb_buffer;
-+		iov.iov_len = sizeof (struct smb_hdr) - 1;	
-+        /* 1 byte less above since wct is not always returned in error cases */
-+		smb_msg.msg_iov = &iov;
-+		smb_msg.msg_iovlen = 1;
-+		smb_msg.msg_control = NULL;
-+		smb_msg.msg_controllen = 0;
-+
-+		length =
-+		    sock_recvmsg(csocket, &smb_msg,
-+				 sizeof (struct smb_hdr) -
-+				 1 /* RFC1001 header and SMB header */ ,
-+				 MSG_PEEK /* flags see socket.h */ );
-+
-+		if(server->tcpStatus == CifsExiting) {
-+			break;
-+		} else if (server->tcpStatus == CifsNeedReconnect) {
-+			cFYI(1,("Reconnecting after server stopped responding"));
-+			cifs_reconnect(server);
-+			cFYI(1,("call to reconnect done"));
-+			csocket = server->ssocket;
-+			continue;
-+		} else if ((length == -ERESTARTSYS) || (length == -EAGAIN)) {
-+			set_current_state(TASK_INTERRUPTIBLE);
-+			schedule_timeout(1); /* minimum sleep to prevent looping
-+				allowing socket to clear and app threads to set
-+				tcpStatus CifsNeedReconnect if server hung */
-+			continue;
-+		} else if (length <= 0) {
-+			if(server->tcpStatus == CifsNew) {
-+				cFYI(1,("tcp session abended prematurely (after SMBnegprot)"));
-+				/* some servers kill tcp session rather than returning
-+					smb negprot error in which case reconnecting here is
-+					not going to help - return error to mount */
-+				break;
-+			}
-+			if(length == -EINTR) { 
-+				cFYI(1,("cifsd thread killed"));
-+				break;
-+			}
-+			cFYI(1,("Reconnecting after unexpected peek error %d",length));
-+			cifs_reconnect(server);
-+			csocket = server->ssocket;
-+			wake_up(&server->response_q);
-+			continue;
-+		}
-+
-+		pdu_length = 4 + ntohl(smb_buffer->smb_buf_length);
-+		/* Ony read pdu_length after below checks for too short (due
-+		   to e.g. int overflow) and too long ie beyond end of buf */
-+		cFYI(1, ("Peek length rcvd: 0x%x beginning 0x%x)", length, pdu_length));
-+
-+		temp = (char *) smb_buffer;
-+		if (length > 3) {
-+			if (temp[0] == (char) RFC1002_SESSION_KEEP_ALIVE) {
-+				iov.iov_base = smb_buffer;
-+				iov.iov_len = 4;
-+				length = sock_recvmsg(csocket, &smb_msg, 4, 0);
-+				cFYI(0,("Received 4 byte keep alive packet"));
-+			} else if (temp[0] == (char) RFC1002_POSITIVE_SESSION_RESPONSE) {
-+				iov.iov_base = smb_buffer;
-+					iov.iov_len = 4;
-+					length = sock_recvmsg(csocket, &smb_msg, 4, 0);
-+					cFYI(1,("Good RFC 1002 session rsp"));
-+			} else if ((temp[0] == (char)RFC1002_NEGATIVE_SESSION_RESPONSE)
-+				   && (length == 5)) {
-+				/* we get this from Windows 98 instead of error on SMB negprot response */
-+				cFYI(1,("Negative RFC 1002 Session Response Error 0x%x)",temp[4]));
-+				if(server->tcpStatus == CifsNew) {
-+					/* if nack on negprot (rather than 
-+					ret of smb negprot error) reconnecting
-+					not going to help, ret error to mount */
-+					break;
-+				} else {
-+					/* give server a second to
-+					clean up before reconnect attempt */
-+					set_current_state(TASK_INTERRUPTIBLE);
-+					schedule_timeout(HZ);
-+					/* always try 445 first on reconnect
-+					since we get NACK on some if we ever
-+					connected to port 139 (the NACK is 
-+					since we do not begin with RFC1001
-+					session initialize frame) */
-+					server->addr.sockAddr.sin_port = CIFS_PORT;
-+					cifs_reconnect(server);
-+					csocket = server->ssocket;
-+					wake_up(&server->response_q);
-+					continue;
-+				}
-+			} else if (temp[0] != (char) 0) {
-+				cERROR(1,("Unknown RFC 1002 frame"));
-+				cifs_dump_mem(" Received Data: ", temp, length);
-+				cifs_reconnect(server);
-+				csocket = server->ssocket;
-+				continue;
-+			} else {
-+				if ((length != sizeof (struct smb_hdr) - 1)
-+				    || (pdu_length >
-+					CIFS_MAX_MSGSIZE + MAX_CIFS_HDR_SIZE)
-+				    || (pdu_length <
-+					sizeof (struct smb_hdr) - 1)
-+				    ||
-+				    (checkSMBhdr
-+				     (smb_buffer, smb_buffer->Mid))) {
-+					cERROR(1,
-+					    ("Invalid size or format for SMB found with length %d and pdu_lenght %d",
-+						length, pdu_length));
-+					cifs_dump_mem("Received Data is: ",temp,sizeof(struct smb_hdr));
-+					/* could we fix this network corruption by finding next 
-+						smb header (instead of killing the session) and
-+						restart reading from next valid SMB found? */
-+					cifs_reconnect(server);
-+					csocket = server->ssocket;
-+					continue;
-+				} else {	/* length ok */
-+
-+					length = 0;
-+					iov.iov_base = smb_buffer;
-+					iov.iov_len = pdu_length;
-+					for (total_read = 0; 
-+					     total_read < pdu_length;
-+					     total_read += length) {	
-+						length = sock_recvmsg(csocket, &smb_msg, 
-+							pdu_length - total_read, 0);
-+						if (length == 0) {
-+							cERROR(1,
-+							       ("Zero length receive when expecting %d ",
-+								pdu_length - total_read));
-+							cifs_reconnect(server);
-+							csocket = server->ssocket;
-+							continue;
-+						}
-+					}
-+				}
-+
-+				dump_smb(smb_buffer, length);
-+				if (checkSMB
-+				    (smb_buffer, smb_buffer->Mid, total_read)) {
-+					cERROR(1, ("Bad SMB Received "));
-+					continue;
-+				}
-+
-+				task_to_wake = NULL;
-+				spin_lock(&GlobalMid_Lock);
-+				list_for_each(tmp, &server->pending_mid_q) {
-+					mid_entry = list_entry(tmp, struct
-+							       mid_q_entry,
-+							       qhead);
-+
-+					if ((mid_entry->mid == smb_buffer->Mid) && (mid_entry->midState == MID_REQUEST_SUBMITTED)) {
-+						cFYI(1,
-+						     (" Mid 0x%x matched - waking up ",mid_entry->mid));
-+						task_to_wake = mid_entry->tsk;
-+						mid_entry->resp_buf =
-+						    smb_buffer;
-+						mid_entry->midState =
-+						    MID_RESPONSE_RECEIVED;
-+					}
-+				}
-+				spin_unlock(&GlobalMid_Lock);
-+				if (task_to_wake) {
-+					smb_buffer = NULL;	/* will be freed by users thread after he is done */
-+					wake_up_process(task_to_wake);
-+				} else if (is_valid_oplock_break(smb_buffer) == FALSE) {                          
-+					cERROR(1, ("No task to wake, unknown frame rcvd!"));
-+					cifs_dump_mem("Received Data is: ",temp,sizeof(struct smb_hdr));
-+				}
-+			}
-+		} else {
-+			cFYI(0,
-+			     ("Frame less than four bytes received  %d bytes long.",
-+			      length));
-+			if (length > 0) {
-+				length = sock_recvmsg(csocket, &smb_msg, length, 0);	/* throw away junk frame */
-+				cFYI(1,
-+				     (" with junk  0x%x in it ",
-+				      *(__u32 *) smb_buffer));
-+			}
-+		}
-+	}
-+	spin_lock(&GlobalMid_Lock);
-+	server->tcpStatus = CifsExiting;
-+	server->tsk = NULL;
-+	atomic_set(&server->inFlight, 0);
-+	spin_unlock(&GlobalMid_Lock);
-+	/* Although there should not be any requests blocked on 
-+	this queue it can not hurt to be paranoid and try to wake up requests
-+	that may haven been blocked when more than 50 at time were on the wire 
-+	to the same server - they now will see the session is in exit state
-+	and get out of SendReceive.  */
-+	wake_up_all(&server->request_q);
-+	/* give those requests time to exit */
-+	set_current_state(TASK_INTERRUPTIBLE);
-+	schedule_timeout(HZ/8);
-+
-+	if(server->ssocket) {
-+		sock_release(csocket);
-+		server->ssocket = NULL;
-+	}
-+	set_fs(temp_fs);
-+	if (smb_buffer) /* buffer usually freed in free_mid - need to free it on error or exit */
-+		cifs_buf_release(smb_buffer);
-+
-+	read_lock(&GlobalSMBSeslock);
-+	if (list_empty(&server->pending_mid_q)) {
-+		/* loop through server session structures attached to this and mark them dead */
-+		list_for_each(tmp, &GlobalSMBSessionList) {
-+			ses =
-+			    list_entry(tmp, struct cifsSesInfo,
-+				       cifsSessionList);
-+			if (ses->server == server) {
-+				ses->status = CifsExiting;
-+				ses->server = NULL;
-+			}
-+		}
-+		read_unlock(&GlobalSMBSeslock);
-+	} else {
-+		spin_lock(&GlobalMid_Lock);
-+		list_for_each(tmp, &server->pending_mid_q) {
-+		mid_entry = list_entry(tmp, struct mid_q_entry, qhead);
-+			if (mid_entry->midState == MID_REQUEST_SUBMITTED) {
-+				cFYI(1,
-+					 (" Clearing Mid 0x%x - waking up ",mid_entry->mid));
-+				task_to_wake = mid_entry->tsk;
-+				if(task_to_wake) {
-+					wake_up_process(task_to_wake);
-+				}
-+			}
-+		}
-+		spin_unlock(&GlobalMid_Lock);
-+		read_unlock(&GlobalSMBSeslock);
-+		set_current_state(TASK_INTERRUPTIBLE);
-+		/* 1/8th of sec is more than enough time for them to exit */
-+		schedule_timeout(HZ/8); 
-+	}
-+
-+	if (list_empty(&server->pending_mid_q)) {
-+		/* mpx threads have not exited yet give them 
-+		at least the smb send timeout time for long ops */
-+		cFYI(1, ("Wait for exit from demultiplex thread"));
-+		set_current_state(TASK_INTERRUPTIBLE);
-+		schedule_timeout(46 * HZ);	
-+		/* if threads still have not exited they are probably never
-+		coming home not much else we can do but free the memory */
-+	}
-+	kfree(server);
-+
-+	set_current_state(TASK_INTERRUPTIBLE);
-+	schedule_timeout(HZ/4);
-+	return 0;
-+}
-+
-+static void * 
-+cifs_kcalloc(size_t size, int type)
-+{
-+	void *addr;
-+	addr = kmalloc(size, type);
-+	if (addr)
-+		memset(addr, 0, size);
-+	return addr;
-+}
-+
-+static int
-+cifs_parse_mount_options(char *options, const char *devname, struct smb_vol *vol)
-+{
-+	char *value;
-+	char *data;
-+	unsigned int  temp_len, i, j;
-+	char separator[2];
-+
-+	separator[0] = ',';
-+	separator[1] = 0; 
-+
-+	memset(vol->source_rfc1001_name,0x20,15);
-+	for(i=0;i < strnlen(system_utsname.nodename,15);i++) {
-+		/* does not have to be a perfect mapping since the field is
-+		informational, only used for servers that do not support
-+		port 445 and it can be overridden at mount time */
-+		vol->source_rfc1001_name[i] = toupper(system_utsname.nodename[i]);
-+	}
-+	vol->source_rfc1001_name[15] = 0;
-+
-+	vol->linux_uid = current->uid;	/* current->euid instead? */
-+	vol->linux_gid = current->gid;
-+	vol->dir_mode = S_IRWXUGO;
-+	/* 2767 perms indicate mandatory locking support */
-+	vol->file_mode = S_IALLUGO & ~(S_ISUID | S_IXGRP);
-+
-+	/* vol->retry default is 0 (i.e. "soft" limited retry not hard retry) */
-+	vol->rw = TRUE;
-+
-+	if (!options)
-+		return 1;
-+
-+	if(strncmp(options,"sep=",4) == 0) {
-+		if(options[4] != 0) {
-+			separator[0] = options[4];
-+			options += 5;
-+		} else {
-+			cFYI(1,("Null separator not allowed"));
-+		}
-+	}
-+		
-+	while ((data = strsep(&options, separator)) != NULL) {
-+		if (!*data)
-+			continue;
-+		if ((value = strchr(data, '=')) != NULL)
-+			*value++ = '\0';
-+		if (strnicmp(data, "user", 4) == 0) {
-+			if (!value || !*value) {
-+				printk(KERN_WARNING
-+				       "CIFS: invalid or missing username\n");
-+				return 1;	/* needs_arg; */
-+			}
-+			if (strnlen(value, 200) < 200) {
-+				vol->username = value;
-+			} else {
-+				printk(KERN_WARNING "CIFS: username too long\n");
-+				return 1;
-+			}
-+		} else if (strnicmp(data, "pass", 4) == 0) {
-+			if (!value || !*value) {
-+				vol->password = NULL;
-+				continue;
-+			}
-+			temp_len = strlen(value);
-+			/* removed password length check, NTLM passwords
-+				can be arbitrarily long */
-+
-+			/* if comma in password, the string will be 
-+			prematurely null terminated.  Commas in password are
-+			specified across the cifs mount interface by a double
-+			comma ie ,, and a comma used as in other cases ie ','
-+			as a parameter delimiter/separator is single and due
-+			to the strsep above is temporarily zeroed. */
-+
-+			/* NB: password legally can have multiple commas and
-+			the only illegal character in a password is null */
-+				
-+			if ((value[temp_len] == 0) && (value[temp_len+1] == separator[0])) {
-+				/* reinsert comma */
-+				value[temp_len] = separator[0];
-+				temp_len+=2;  /* move after the second comma */
-+				while(value[temp_len] != 0)  {
-+					if((value[temp_len] == separator[0]) && (value[temp_len+1] != separator[0])) {
-+						/* single comma indicating start of next parm */
-+						break;
-+					}
-+					temp_len++;
-+				}
-+				if(value[temp_len] == 0) {
-+					options = NULL;
-+				} else {
-+					value[temp_len] = 0;
-+					/* move options to point to start of next parm */
-+					options = value + temp_len + 1;
-+				}
-+				/* go from value to (value + temp_len) condensing double commas to singles */
-+				vol->password = cifs_kcalloc(temp_len, GFP_KERNEL);
-+				for(i=0,j=0;i<temp_len;i++,j++) {
-+					vol->password[j] = value[i];
-+					if(value[i] == separator[0] && value[i+1] == separator[0]) {
-+						/* skip second comma */
-+						i++;
-+					}
-+				}
-+				/* value[temp_len] is zeroed above so
-+					 vol->password[temp_len] guaranteed to be null */
-+			} else {
-+				vol->password = cifs_kcalloc(temp_len + 1, GFP_KERNEL);
-+				strcpy(vol->password, value);
-+			}
-+		} else if (strnicmp(data, "ip", 2) == 0) {
-+			if (!value || !*value) {
-+				vol->UNCip = NULL;
-+			} else if (strnlen(value, 35) < 35) {
-+				vol->UNCip = value;
-+			} else {
-+				printk(KERN_WARNING "CIFS: ip address too long\n");
-+				return 1;
-+			}
-+		} else if ((strnicmp(data, "unc", 3) == 0)
-+			   || (strnicmp(data, "target", 6) == 0)
-+			   || (strnicmp(data, "path", 4) == 0)) {
-+			if (!value || !*value) {
-+				printk(KERN_WARNING
-+				       "CIFS: invalid path to network resource\n");
-+				return 1;	/* needs_arg; */
-+			}
-+			if ((temp_len = strnlen(value, 300)) < 300) {
-+				vol->UNC = kmalloc(temp_len+1,GFP_KERNEL);
-+				if(vol->UNC == NULL)
-+					return 1;
-+				strcpy(vol->UNC,value);
-+				if (strncmp(vol->UNC, "//", 2) == 0) {
-+					vol->UNC[0] = '\\';
-+					vol->UNC[1] = '\\';
-+				} else if (strncmp(vol->UNC, "\\\\", 2) != 0) {	                   
-+					printk(KERN_WARNING
-+					       "CIFS: UNC Path does not begin with // or \\\\ \n");
-+					return 1;
-+				}
-+			} else {
-+				printk(KERN_WARNING "CIFS: UNC name too long\n");
-+				return 1;
-+			}
-+		} else if ((strnicmp(data, "domain", 3) == 0)
-+			   || (strnicmp(data, "workgroup", 5) == 0)) {
-+			if (!value || !*value) {
-+				printk(KERN_WARNING "CIFS: invalid domain name\n");
-+				return 1;	/* needs_arg; */
-+			}
-+			/* BB are there cases in which a comma can be valid in
-+			a domain name and need special handling? */
-+			if (strnlen(value, 65) < 65) {
-+				vol->domainname = value;
-+				cFYI(1, ("Domain name set"));
-+			} else {
-+				printk(KERN_WARNING "CIFS: domain name too long\n");
-+				return 1;
-+			}
-+		} else if (strnicmp(data, "iocharset", 9) == 0) {
-+			if (!value || !*value) {
-+				printk(KERN_WARNING "CIFS: invalid iocharset specified\n");
-+				return 1;	/* needs_arg; */
-+			}
-+			if (strnlen(value, 65) < 65) {
-+				if(strnicmp(value,"default",7))
-+					vol->iocharset = value;
-+				/* if iocharset not set load_nls_default used by caller */
-+				cFYI(1, ("iocharset set to %s",value));
-+			} else {
-+				printk(KERN_WARNING "CIFS: iocharset name too long.\n");
-+				return 1;
-+			}
-+		} else if (strnicmp(data, "uid", 3) == 0) {
-+			if (value && *value) {
-+				vol->linux_uid =
-+					simple_strtoul(value, &value, 0);
-+			}
-+		} else if (strnicmp(data, "gid", 3) == 0) {
-+			if (value && *value) {
-+				vol->linux_gid =
-+					simple_strtoul(value, &value, 0);
-+			}
-+		} else if (strnicmp(data, "file_mode", 4) == 0) {
-+			if (value && *value) {
-+				vol->file_mode =
-+					simple_strtoul(value, &value, 0);
-+			}
-+		} else if (strnicmp(data, "dir_mode", 3) == 0) {
-+			if (value && *value) {
-+				vol->dir_mode =
-+					simple_strtoul(value, &value, 0);
-+			}
-+		} else if (strnicmp(data, "port", 4) == 0) {
-+			if (value && *value) {
-+				vol->port =
-+					simple_strtoul(value, &value, 0);
-+			}
-+		} else if (strnicmp(data, "rsize", 5) == 0) {
-+			if (value && *value) {
-+				vol->rsize =
-+					simple_strtoul(value, &value, 0);
-+			}
-+		} else if (strnicmp(data, "wsize", 5) == 0) {
-+			if (value && *value) {
-+				vol->wsize =
-+					simple_strtoul(value, &value, 0);
-+			}
-+		} else if (strnicmp(data, "sockopt", 5) == 0) {
-+			if (value && *value) {
-+				vol->sockopt =
-+					simple_strtoul(value, &value, 0);
-+			}
-+		} else if (strnicmp(data, "netbiosname", 4) == 0) {
-+			if (!value || !*value || (*value == ' ')) {
-+				cFYI(1,("invalid (empty) netbiosname specified"));
-+			} else {
-+				memset(vol->source_rfc1001_name,0x20,15);
-+				for(i=0;i<15;i++) {
-+				/* BB are there cases in which a comma can be 
-+				valid in this workstation netbios name (and need
-+				special handling)? */
-+
-+				/* We do not uppercase netbiosname for user */
-+					if (value[i]==0)
-+						break;
-+					else 
-+						vol->source_rfc1001_name[i] = value[i];
-+				}
-+				/* The string has 16th byte zero still from
-+				set at top of the function  */
-+				if((i==15) && (value[i] != 0))
-+					printk(KERN_WARNING "CIFS: netbiosname longer than 15 and was truncated.\n");
-+			}
-+		} else if (strnicmp(data, "credentials", 4) == 0) {
-+			/* ignore */
-+		} else if (strnicmp(data, "version", 3) == 0) {
-+			/* ignore */
-+		} else if (strnicmp(data, "rw", 2) == 0) {
-+			vol->rw = TRUE;
-+		} else if ((strnicmp(data, "suid", 4) == 0) ||
-+				   (strnicmp(data, "nosuid", 6) == 0) ||
-+				   (strnicmp(data, "exec", 4) == 0) ||
-+				   (strnicmp(data, "noexec", 6) == 0) ||
-+				   (strnicmp(data, "nodev", 5) == 0) ||
-+				   (strnicmp(data, "noauto", 6) == 0) ||
-+				   (strnicmp(data, "dev", 3) == 0)) {
-+			/*  The mount tool or mount.cifs helper (if present)
-+				uses these opts to set flags, and the flags are read
-+				by the kernel vfs layer before we get here (ie
-+				before read super) so there is no point trying to
-+				parse these options again and set anything and it
-+				is ok to just ignore them */
-+			continue;
-+		} else if (strnicmp(data, "ro", 2) == 0) {
-+			vol->rw = FALSE;
-+		} else if (strnicmp(data, "hard", 4) == 0) {
-+			vol->retry = 1;
-+		} else if (strnicmp(data, "soft", 4) == 0) {
-+			vol->retry = 0;
-+		} else if (strnicmp(data, "nohard", 6) == 0) {
-+			vol->retry = 0;
-+		} else if (strnicmp(data, "nosoft", 6) == 0) {
-+			vol->retry = 1;
-+		} else if (strnicmp(data, "nointr", 6) == 0) {
-+			vol->intr = 0;
-+		} else if (strnicmp(data, "intr", 4) == 0) {
-+			vol->intr = 1;
-+		} else if (strnicmp(data, "noac", 4) == 0) {
-+			printk(KERN_WARNING "CIFS: Mount option noac not supported. Instead set /proc/fs/cifs/LookupCacheEnabled to 0\n");
-+		} else
-+			printk(KERN_WARNING "CIFS: Unknown mount option %s\n",data);
-+	}
-+	if (vol->UNC == NULL) {
-+		if(devname == NULL) {
-+			printk(KERN_WARNING "CIFS: Missing UNC name for mount target\n");
-+			return 1;
-+		}
-+		if ((temp_len = strnlen(devname, 300)) < 300) {
-+			vol->UNC = kmalloc(temp_len+1,GFP_KERNEL);
-+			if(vol->UNC == NULL)
-+				return 1;
-+			strcpy(vol->UNC,devname);
-+			if (strncmp(vol->UNC, "//", 2) == 0) {
-+				vol->UNC[0] = '\\';
-+				vol->UNC[1] = '\\';
-+			} else if (strncmp(vol->UNC, "\\\\", 2) != 0) {
-+				printk(KERN_WARNING "CIFS: UNC Path does not begin with // or \\\\ \n");
-+				return 1;
-+			}
-+		} else {
-+			printk(KERN_WARNING "CIFS: UNC name too long\n");
-+			return 1;
-+		}
-+	}
-+	if(vol->UNCip == 0)
-+		vol->UNCip = &vol->UNC[2];
-+
-+	return 0;
-+}
-+
-+static struct cifsSesInfo *
-+cifs_find_tcp_session(__u32 new_target_ip_addr,
-+		 char *userName, struct TCP_Server_Info **psrvTcp)
-+{
-+	struct list_head *tmp;
-+	struct cifsSesInfo *ses;
-+
-+	*psrvTcp = NULL;
-+	read_lock(&GlobalSMBSeslock);
-+	list_for_each(tmp, &GlobalSMBSessionList) {
-+		ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList);
-+		if (ses->server) {
-+			if (ses->server->addr.sockAddr.sin_addr.s_addr ==
-+			    new_target_ip_addr) {
-+				/* BB lock server and tcp session and increment use count here?? */
-+				*psrvTcp = ses->server;	/* found a match on the TCP session */
-+				/* BB check if reconnection needed */
-+				if (strncmp
-+				    (ses->userName, userName,
-+				     MAX_USERNAME_SIZE) == 0){
-+					read_unlock(&GlobalSMBSeslock);
-+					return ses;	/* found exact match on both tcp and SMB sessions */
-+				}
-+			}
-+		}
-+		/* else tcp and smb sessions need reconnection */
-+	}
-+	read_unlock(&GlobalSMBSeslock);
-+	return NULL;
-+}
-+
-+static struct cifsTconInfo *
-+find_unc(__u32 new_target_ip_addr, char *uncName, char *userName)
-+{
-+	struct list_head *tmp;
-+	struct cifsTconInfo *tcon;
-+
-+	read_lock(&GlobalSMBSeslock);
-+	list_for_each(tmp, &GlobalTreeConnectionList) {
-+		cFYI(1, ("Next tcon - "));
-+		tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
-+		if (tcon->ses) {
-+			if (tcon->ses->server) {
-+				cFYI(1,
-+				     (" old ip addr: %x == new ip %x ?",
-+				      tcon->ses->server->addr.sockAddr.sin_addr.
-+				      s_addr, new_target_ip_addr));
-+				if (tcon->ses->server->addr.sockAddr.sin_addr.
-+				    s_addr == new_target_ip_addr) {
-+	/* BB lock tcon and server and tcp session and increment use count here? */
-+					/* found a match on the TCP session */
-+					/* BB check if reconnection needed */
-+					cFYI(1,("Matched ip, old UNC: %s == new: %s ?",
-+					      tcon->treeName, uncName));
-+					if (strncmp
-+					    (tcon->treeName, uncName,
-+					     MAX_TREE_SIZE) == 0) {
-+						cFYI(1,
-+						     ("Matched UNC, old user: %s == new: %s ?",
-+						      tcon->treeName, uncName));
-+						if (strncmp
-+						    (tcon->ses->userName,
-+						     userName,
-+						     MAX_USERNAME_SIZE) == 0) {
-+							read_unlock(&GlobalSMBSeslock);
-+							return tcon;/* also matched user (smb session)*/
-+						}
-+					}
-+				}
-+			}
-+		}
-+	}
-+	read_unlock(&GlobalSMBSeslock);
-+	return NULL;
-+}
-+
-+int
-+connect_to_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
-+		    const char *old_path, const struct nls_table *nls_codepage)
-+{
-+	unsigned char *referrals = NULL;
-+	unsigned int num_referrals;
-+	int rc = 0;
-+
-+	rc = get_dfs_path(xid, pSesInfo,old_path, nls_codepage, 
-+			&num_referrals, &referrals);
-+
-+	/* BB Add in code to: if valid refrl, if not ip address contact
-+		the helper that resolves tcp names, mount to it, try to 
-+		tcon to it unmount it if fail */
-+
-+	if(referrals)
-+		kfree(referrals);
-+
-+	return rc;
-+}
-+
-+int
-+get_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
-+			const char *old_path, const struct nls_table *nls_codepage, 
-+			unsigned int *pnum_referrals, unsigned char ** preferrals)
-+{
-+	char *temp_unc;
-+	int rc = 0;
-+
-+	*pnum_referrals = 0;
-+
-+	if (pSesInfo->ipc_tid == 0) {
-+		temp_unc = kmalloc(2 /* for slashes */ +
-+			strnlen(pSesInfo->serverName,SERVER_NAME_LEN_WITH_NULL * 2)
-+				 + 1 + 4 /* slash IPC$ */  + 2,
-+				GFP_KERNEL);
-+		if (temp_unc == NULL)
-+			return -ENOMEM;
-+		temp_unc[0] = '\\';
-+		temp_unc[1] = '\\';
-+		strcpy(temp_unc + 2, pSesInfo->serverName);
-+		strcpy(temp_unc + 2 + strlen(pSesInfo->serverName), "\\IPC$");
-+		rc = CIFSTCon(xid, pSesInfo, temp_unc, NULL, nls_codepage);
-+		cFYI(1,
-+		     ("CIFS Tcon rc = %d ipc_tid = %d", rc,pSesInfo->ipc_tid));
-+		kfree(temp_unc);
-+	}
-+	if (rc == 0)
-+		rc = CIFSGetDFSRefer(xid, pSesInfo, old_path, preferrals,
-+				     pnum_referrals, nls_codepage);
-+
-+	return rc;
-+}
-+
-+/* See RFC1001 section 14 on representation of Netbios names */
-+static void rfc1002mangle(char * target,char * source, unsigned int length)
-+{
-+	unsigned int i,j;
-+
-+	for(i=0,j=0;i<(length);i++) {
-+		/* mask a nibble at a time and encode */
-+		target[j] = 'A' + (0x0F & (source[i] >> 4));
-+		target[j+1] = 'A' + (0x0F & source[i]);
-+		j+=2;
-+	}
-+
-+}
-+
-+
-+static int
-+ipv4_connect(struct sockaddr_in *psin_server, struct socket **csocket, 
-+			 char * netbios_name)
-+{
-+	int rc = 0;
-+	int connected = 0;
-+	unsigned short int orig_port = 0;
-+
-+	if(*csocket == NULL) {
-+		rc = sock_create(PF_INET, SOCK_STREAM, IPPROTO_TCP, csocket);
-+		if (rc < 0) {
-+			cERROR(1, ("Error %d creating socket",rc));
-+			*csocket = NULL;
-+			return rc;
-+		} else {
-+		/* BB other socket options to set KEEPALIVE, NODELAY? */
-+			cFYI(1,("Socket created"));
-+			(*csocket)->sk->allocation = GFP_NOFS; 
-+		}
-+	}
-+
-+	psin_server->sin_family = AF_INET;
-+	if(psin_server->sin_port) { /* user overrode default port */
-+		rc = (*csocket)->ops->connect(*csocket,
-+				(struct sockaddr *) psin_server,
-+				sizeof (struct sockaddr_in),0);
-+		if (rc >= 0)
-+			connected = 1;
-+	} 
-+
-+	if(!connected) {
-+		/* save original port so we can retry user specified port  
-+			later if fall back ports fail this time  */
-+		orig_port = psin_server->sin_port;
-+
-+		/* do not retry on the same port we just failed on */
-+		if(psin_server->sin_port != htons(CIFS_PORT)) {
-+			psin_server->sin_port = htons(CIFS_PORT);
-+
-+			rc = (*csocket)->ops->connect(*csocket,
-+					(struct sockaddr *) psin_server,
-+					sizeof (struct sockaddr_in),0);
-+			if (rc >= 0)
-+				connected = 1;
-+		}
-+	}
-+	if (!connected) {
-+		psin_server->sin_port = htons(RFC1001_PORT);
-+		rc = (*csocket)->ops->connect(*csocket, (struct sockaddr *)
-+					      psin_server, sizeof (struct sockaddr_in),0);
-+		if (rc >= 0) 
-+			connected = 1;
-+	}
-+
-+	/* give up here - unless we want to retry on different
-+		protocol families some day */
-+	if (!connected) {
-+		if(orig_port)
-+			psin_server->sin_port = orig_port;
-+		cFYI(1,("Error %d connecting to server via ipv4",rc));
-+		sock_release(*csocket);
-+		*csocket = NULL;
-+		return rc;
-+	}
-+	/* Eventually check for other socket options to change from 
-+		the default. sock_setsockopt not used because it expects 
-+		user space buffer */
-+	(*csocket)->sk->rcvtimeo = 7 * HZ;
-+			
-+	/* send RFC1001 sessinit */
-+
-+	if(psin_server->sin_port == htons(139)) {
-+		/* some servers require RFC1001 sessinit before sending
-+		negprot - BB check reconnection in case where second 
-+		sessinit is sent but no second negprot */
-+		struct rfc1002_session_packet * ses_init_buf;
-+		struct smb_hdr * smb_buf;
-+		ses_init_buf = cifs_kcalloc(sizeof(struct rfc1002_session_packet), GFP_KERNEL);
-+		if(ses_init_buf) {
-+			ses_init_buf->trailer.session_req.called_len = 32;
-+			rfc1002mangle(ses_init_buf->trailer.session_req.called_name,
-+				DEFAULT_CIFS_CALLED_NAME,16);
-+			ses_init_buf->trailer.session_req.calling_len = 32;
-+			/* calling name ends in null (byte 16) from old smb
-+			convention. */
-+			if(netbios_name && (netbios_name[0] !=0)) {
-+				rfc1002mangle(ses_init_buf->trailer.session_req.calling_name,
-+					netbios_name,16);
-+			} else {
-+				rfc1002mangle(ses_init_buf->trailer.session_req.calling_name,
-+					"LINUX_CIFS_CLNT",16);
-+			}
-+			ses_init_buf->trailer.session_req.scope1 = 0;
-+			ses_init_buf->trailer.session_req.scope2 = 0;
-+			smb_buf = (struct smb_hdr *)ses_init_buf;
-+			/* sizeof RFC1002_SESSION_REQUEST with no scope */
-+			smb_buf->smb_buf_length = 0x81000044;
-+			rc = smb_send(*csocket, smb_buf, 0x44,
-+				(struct sockaddr *)psin_server);
-+			kfree(ses_init_buf);
-+		}
-+		/* else the negprot may still work without this 
-+		even though malloc failed */
-+		
-+	}
-+		
-+	return rc;
-+}
-+
-+static int
-+ipv6_connect(struct sockaddr_in6 *psin_server, struct socket **csocket)
-+{
-+	int rc = 0;
-+	int connected = 0;
-+
-+	if(*csocket == NULL) {
-+		rc = sock_create(PF_INET6, SOCK_STREAM, IPPROTO_TCP, csocket);
-+		if (rc < 0) {
-+			cERROR(1, ("Error %d creating ipv6 socket",rc));
-+			*csocket = NULL;
-+			return rc;
-+		} else {
-+		/* BB other socket options to set KEEPALIVE, NODELAY? */
-+			 cFYI(1,("ipv6 Socket created"));
-+			(*csocket)->sk->allocation = GFP_NOFS;
-+		}
-+	}
-+
-+	psin_server->sin6_family = AF_INET6;
-+
-+	if(psin_server->sin6_port) { /* user overrode default port */
-+		rc = (*csocket)->ops->connect(*csocket,
-+				(struct sockaddr *) psin_server,
-+				sizeof (struct sockaddr_in6),0);
-+		if (rc >= 0)
-+			connected = 1;
-+	} 
-+
-+	if(!connected) {
-+		/* do not retry on the same port we just failed on */
-+		if(psin_server->sin6_port != htons(CIFS_PORT)) {
-+			psin_server->sin6_port = htons(CIFS_PORT);
-+
-+			rc = (*csocket)->ops->connect(*csocket,
-+					(struct sockaddr *) psin_server,
-+					sizeof (struct sockaddr_in6),0);
-+			if (rc >= 0)
-+				connected = 1;
-+		}
-+	}
-+	if (!connected) {
-+		psin_server->sin6_port = htons(RFC1001_PORT);
-+		rc = (*csocket)->ops->connect(*csocket, (struct sockaddr *)
-+					 psin_server, sizeof (struct sockaddr_in6),0);
-+		if (rc >= 0) 
-+			connected = 1;
-+	}
-+
-+	/* give up here - unless we want to retry on different
-+		protocol families some day */
-+	if (!connected) {
-+		cFYI(1,("Error %d connecting to server via ipv6",rc));
-+		sock_release(*csocket);
-+		*csocket = NULL;
-+		return rc;
-+	}
-+	/* Eventually check for other socket options to change from 
-+		the default. sock_setsockopt not used because it expects 
-+		user space buffer */
-+	(*csocket)->sk->rcvtimeo = 7 * HZ;
-+		
-+	return rc;
-+}
-+
-+int
-+cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
-+	   char *mount_data, const char *devname)
-+{
-+	int rc = 0;
-+	int xid;
-+	struct socket *csocket = NULL;
-+	struct sockaddr_in sin_server;
-+	struct sockaddr_in6 sin_server6;
-+	struct smb_vol volume_info;
-+	struct cifsSesInfo *pSesInfo = NULL;
-+	struct cifsSesInfo *existingCifsSes = NULL;
-+	struct cifsTconInfo *tcon = NULL;
-+	struct TCP_Server_Info *srvTcp = NULL;
-+
-+	xid = GetXid();
-+
-+	cFYI(1, ("Entering cifs_mount. Xid: %d with: %s", xid, mount_data)); /* BB removeme BB fixme */
-+	
-+	memset(&volume_info,0,sizeof(struct smb_vol));
-+	if (cifs_parse_mount_options(mount_data, devname, &volume_info)) {
-+		if(volume_info.UNC)
-+			kfree(volume_info.UNC);
-+		if(volume_info.password)
-+			kfree(volume_info.password);
-+		FreeXid(xid);
-+		return -EINVAL;
-+	}
-+
-+	if (volume_info.username) {
-+		cFYI(1, ("Username: %s ", volume_info.username));
-+
-+	} else {
-+		cifserror("No username specified ");
-+        /* In userspace mount helper we can get user name from alternate
-+           locations such as env variables and files on disk */
-+		if(volume_info.UNC)
-+			kfree(volume_info.UNC);
-+		if(volume_info.password)
-+			kfree(volume_info.password);
-+		FreeXid(xid);
-+		return -EINVAL;
-+	}
-+
-+	if (volume_info.UNCip && volume_info.UNC) {
-+		rc = cifs_inet_pton(AF_INET, volume_info.UNCip,&sin_server.sin_addr.s_addr);
-+
-+		if(rc == 0) {
-+			/* not ipv4 address, try ipv6 */
-+			rc = cifs_inet_pton(AF_INET6,volume_info.UNCip,&sin_server6.sin6_addr.in6_u); 
-+		} 
-+       
-+		if(rc != 1) {
-+			/* we failed translating address */
-+			if(volume_info.UNC)
-+				kfree(volume_info.UNC);
-+			if(volume_info.password)
-+				kfree(volume_info.password);
-+			FreeXid(xid);
-+			return -EINVAL;
-+		}
-+
-+		cFYI(1, ("UNC: %s ip: %s", volume_info.UNC, volume_info.UNCip));
-+		/* success */
-+		rc = 0;
-+	} else if (volume_info.UNCip){
-+		/* BB using ip addr as server name connect to the DFS root below */
-+		cERROR(1,("Connecting to DFS root not implemented yet"));
-+		if(volume_info.UNC)
-+			kfree(volume_info.UNC);
-+		if(volume_info.password)
-+			kfree(volume_info.password);
-+		FreeXid(xid);
-+		return -EINVAL;
-+	} else /* which servers DFS root would we conect to */ {
-+		cERROR(1,
-+		       ("CIFS mount error: No UNC path (e.g. -o unc=//192.168.1.100/public) specified  "));
-+		if(volume_info.UNC)
-+			kfree(volume_info.UNC);
-+		if(volume_info.password)
-+			kfree(volume_info.password);
-+		FreeXid(xid);
-+		return -EINVAL;
-+	}
-+
-+	/* this is needed for ASCII cp to Unicode converts */
-+	if(volume_info.iocharset == NULL) {
-+		cifs_sb->local_nls = load_nls_default();
-+	/* load_nls_default can not return null */
-+	} else {
-+		cifs_sb->local_nls = load_nls(volume_info.iocharset);
-+		if(cifs_sb->local_nls == NULL) {
-+			cERROR(1,("CIFS mount error: iocharset %s not found",volume_info.iocharset));
-+			if(volume_info.UNC)
-+				kfree(volume_info.UNC);
-+			if(volume_info.password)
-+				kfree(volume_info.password);
-+			FreeXid(xid);
-+			return -ELIBACC;
-+		}
-+	}
-+
-+	existingCifsSes =
-+	    cifs_find_tcp_session(sin_server.sin_addr.s_addr,
-+			     volume_info.username, &srvTcp);
-+	if (srvTcp) {
-+		cFYI(1, ("Existing tcp session with server found "));                
-+	} else {	/* create socket */
-+		if(volume_info.port)
-+			sin_server.sin_port = htons(volume_info.port);
-+		else
-+			sin_server.sin_port = 0;
-+		rc = ipv4_connect(&sin_server,&csocket,volume_info.source_rfc1001_name);
-+		if (rc < 0) {
-+			cERROR(1,
-+			       ("Error connecting to IPv4 socket. Aborting operation"));
-+			if(csocket != NULL)
-+				sock_release(csocket);
-+			if(volume_info.UNC)
-+				kfree(volume_info.UNC);
-+			if(volume_info.password)
-+				kfree(volume_info.password);
-+			FreeXid(xid);
-+			return rc;
-+		}
-+
-+		srvTcp = kmalloc(sizeof (struct TCP_Server_Info), GFP_KERNEL);
-+		if (srvTcp == NULL) {
-+			rc = -ENOMEM;
-+			sock_release(csocket);
-+			if(volume_info.UNC)
-+				kfree(volume_info.UNC);
-+			if(volume_info.password)
-+				kfree(volume_info.password);
-+			FreeXid(xid);
-+			return rc;
-+		} else {
-+			memset(srvTcp, 0, sizeof (struct TCP_Server_Info));
-+			memcpy(&srvTcp->addr.sockAddr, &sin_server, sizeof (struct sockaddr_in));
-+			atomic_set(&srvTcp->inFlight,0);
-+			/* BB Add code for ipv6 case too */
-+			srvTcp->ssocket = csocket;
-+			srvTcp->protocolType = IPV4;
-+			init_waitqueue_head(&srvTcp->response_q);
-+			init_waitqueue_head(&srvTcp->request_q);
-+			INIT_LIST_HEAD(&srvTcp->pending_mid_q);
-+			/* at this point we are the only ones with the pointer
-+			to the struct since the kernel thread not created yet
-+			so no need to spinlock this init of tcpStatus */
-+			srvTcp->tcpStatus = CifsNew;
-+			init_MUTEX(&srvTcp->tcpSem);
-+			kernel_thread((void *)(void *)cifs_demultiplex_thread, srvTcp,
-+				      CLONE_FS | CLONE_FILES | CLONE_VM);
-+			memcpy(srvTcp->workstation_RFC1001_name, volume_info.source_rfc1001_name,16);
-+		}
-+	}
-+
-+	if (existingCifsSes) {
-+		pSesInfo = existingCifsSes;
-+		cFYI(1, ("Existing smb sess found "));
-+		if(volume_info.password)
-+			kfree(volume_info.password);
-+		/* volume_info.UNC freed at end of function */
-+	} else if (!rc) {
-+		cFYI(1, ("Existing smb sess not found "));
-+		pSesInfo = sesInfoAlloc();
-+		if (pSesInfo == NULL)
-+			rc = -ENOMEM;
-+		else {
-+			pSesInfo->server = srvTcp;
-+			sprintf(pSesInfo->serverName, "%u.%u.%u.%u",
-+				NIPQUAD(sin_server.sin_addr.s_addr));
-+		}
-+
-+		if (!rc){
-+			/* volume_info.password freed at unmount */   
-+			if (volume_info.password)
-+				pSesInfo->password = volume_info.password;
-+			if (volume_info.username)
-+				strncpy(pSesInfo->userName,
-+					volume_info.username,MAX_USERNAME_SIZE);
-+			if (volume_info.domainname)
-+				strncpy(pSesInfo->domainName,
-+					volume_info.domainname,MAX_USERNAME_SIZE);
-+			pSesInfo->linux_uid = volume_info.linux_uid;
-+			down(&pSesInfo->sesSem);
-+			rc = cifs_setup_session(xid,pSesInfo, cifs_sb->local_nls);
-+			up(&pSesInfo->sesSem);
-+			if(!rc)
-+				atomic_inc(&srvTcp->socketUseCount);
-+		} else
-+			if(volume_info.password)
-+				kfree(volume_info.password);
-+	}
-+    
-+	/* search for existing tcon to this server share */
-+	if (!rc) {
-+		if((volume_info.rsize) && (volume_info.rsize + MAX_CIFS_HDR_SIZE < srvTcp->maxBuf))
-+			cifs_sb->rsize = volume_info.rsize;
-+		else
-+			cifs_sb->rsize = srvTcp->maxBuf - MAX_CIFS_HDR_SIZE; /* default */
-+		if((volume_info.wsize) && (volume_info.wsize + MAX_CIFS_HDR_SIZE < srvTcp->maxBuf))
-+			cifs_sb->wsize = volume_info.wsize;
-+		else
-+			cifs_sb->wsize = srvTcp->maxBuf - MAX_CIFS_HDR_SIZE; /* default */
-+		if(cifs_sb->rsize < PAGE_CACHE_SIZE) {
-+			cifs_sb->rsize = PAGE_CACHE_SIZE;
-+			cERROR(1,("Attempt to set readsize for mount to less than one page (4096)"));
-+		}
-+		cifs_sb->mnt_uid = volume_info.linux_uid;
-+		cifs_sb->mnt_gid = volume_info.linux_gid;
-+		cifs_sb->mnt_file_mode = volume_info.file_mode;
-+		cifs_sb->mnt_dir_mode = volume_info.dir_mode;
-+		cFYI(1,("file mode: 0x%x  dir mode: 0x%x",cifs_sb->mnt_file_mode,cifs_sb->mnt_dir_mode));
-+		tcon =
-+		    find_unc(sin_server.sin_addr.s_addr, volume_info.UNC,
-+			     volume_info.username);
-+		if (tcon) {
-+			cFYI(1, ("Found match on UNC path "));
-+			/* we can have only one retry value for a connection
-+			   to a share so for resources mounted more than once
-+			   to the same server share the last value passed in 
-+			   for the retry flag is used */
-+			tcon->retry = volume_info.retry;
-+		} else {
-+			tcon = tconInfoAlloc();
-+			if (tcon == NULL)
-+				rc = -ENOMEM;
-+			else {
-+				/* check for null share name ie connect to dfs root */
-+
-+				/* BB check if this works for exactly length three strings */
-+				if ((strchr(volume_info.UNC + 3, '\\') == NULL)
-+				    && (strchr(volume_info.UNC + 3, '/') ==
-+					NULL)) {
-+					rc = connect_to_dfs_path(xid,
-+								 pSesInfo,
-+								 "",
-+								 cifs_sb->
-+								 local_nls);
-+					if(volume_info.UNC)
-+						kfree(volume_info.UNC);
-+					FreeXid(xid);
-+					return -ENODEV;
-+				} else {
-+					rc = CIFSTCon(xid, pSesInfo, 
-+						volume_info.UNC,
-+						tcon, cifs_sb->local_nls);
-+					cFYI(1, ("CIFS Tcon rc = %d", rc));
-+				}
-+				if (!rc) {
-+					atomic_inc(&pSesInfo->inUse);
-+					tcon->retry = volume_info.retry;
-+				}
-+			}
-+		}
-+	}
-+	if(pSesInfo) {
-+		if (pSesInfo->capabilities & CAP_LARGE_FILES) {
-+			sb->s_maxbytes = (u64) 1 << 63;
-+		} else
-+			sb->s_maxbytes = (u64) 1 << 31;	/* 2 GB */
-+	}
-+
-+/* on error free sesinfo and tcon struct if needed */
-+	if (rc) {
-+		/* if session setup failed, use count is zero but
-+		we still need to free cifsd thread */
-+		if(atomic_read(&srvTcp->socketUseCount) == 0) {
-+			spin_lock(&GlobalMid_Lock);
-+			srvTcp->tcpStatus = CifsExiting;
-+			spin_unlock(&GlobalMid_Lock);
-+			if(srvTcp->tsk)
-+				send_sig(SIGKILL,srvTcp->tsk,1);
-+		}
-+		 /* If find_unc succeeded then rc == 0 so we can not end */
-+		if (tcon)  /* up accidently freeing someone elses tcon struct */
-+			tconInfoFree(tcon);
-+		if (existingCifsSes == 0) {
-+			if (pSesInfo) {
-+				if ((pSesInfo->server) && 
-+				    (pSesInfo->status == CifsGood)) {
-+					int temp_rc;
-+					temp_rc = CIFSSMBLogoff(xid, pSesInfo);
-+					/* if the socketUseCount is now zero */
-+					if((temp_rc == -ESHUTDOWN) &&
-+					   (pSesInfo->server->tsk))
-+						send_sig(SIGKILL,pSesInfo->server->tsk,1);
-+				} else
-+					cFYI(1, ("No session or bad tcon"));
-+				sesInfoFree(pSesInfo);
-+				/* pSesInfo = NULL; */
-+			}
-+		}
-+	} else {
-+		atomic_inc(&tcon->useCount);
-+		cifs_sb->tcon = tcon;
-+		tcon->ses = pSesInfo;
-+
-+		/* do not care if following two calls succeed - informational only */
-+		CIFSSMBQFSDeviceInfo(xid, tcon, cifs_sb->local_nls);
-+		CIFSSMBQFSAttributeInfo(xid, tcon, cifs_sb->local_nls);
-+		if (tcon->ses->capabilities & CAP_UNIX)
-+			CIFSSMBQFSUnixInfo(xid, tcon, cifs_sb->local_nls);
-+	}
-+
-+	/* volume_info.password is freed above when existing session found
-+	(in which case it is not needed anymore) but when new sesion is created
-+	the password ptr is put in the new session structure (in which case the
-+	password will be freed at unmount time) */
-+	if(volume_info.UNC)
-+		kfree(volume_info.UNC);
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+static int
-+CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
-+	      char session_key[CIFS_SESSION_KEY_SIZE],
-+	      const struct nls_table *nls_codepage)
-+{
-+	struct smb_hdr *smb_buffer;
-+	struct smb_hdr *smb_buffer_response;
-+	SESSION_SETUP_ANDX *pSMB;
-+	SESSION_SETUP_ANDX *pSMBr;
-+	char *bcc_ptr;
-+	char *user = ses->userName;
-+	char *domain = ses->domainName;
-+	int rc = 0;
-+	int remaining_words = 0;
-+	int bytes_returned = 0;
-+	int len;
-+
-+	cFYI(1, ("In sesssetup "));
-+
-+	smb_buffer = cifs_buf_get();
-+	if (smb_buffer == 0) {
-+		return -ENOMEM;
-+	}
-+	smb_buffer_response = smb_buffer;
-+	pSMBr = pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
-+
-+	/* send SMBsessionSetup here */
-+	header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
-+			NULL /* no tCon exists yet */ , 13 /* wct */ );
-+
-+	pSMB->req_no_secext.AndXCommand = 0xFF;
-+	pSMB->req_no_secext.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
-+	pSMB->req_no_secext.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-+
-+	if(ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-+		smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-+
-+	pSMB->req_no_secext.Capabilities =
-+	    CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS;
-+	if (ses->capabilities & CAP_UNICODE) {
-+		smb_buffer->Flags2 |= SMBFLG2_UNICODE;
-+		pSMB->req_no_secext.Capabilities |= CAP_UNICODE;
-+	}
-+	if (ses->capabilities & CAP_STATUS32) {
-+		smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
-+		pSMB->req_no_secext.Capabilities |= CAP_STATUS32;
-+	}
-+	if (ses->capabilities & CAP_DFS) {
-+		smb_buffer->Flags2 |= SMBFLG2_DFS;
-+		pSMB->req_no_secext.Capabilities |= CAP_DFS;
-+	}
-+	pSMB->req_no_secext.Capabilities =
-+	    cpu_to_le32(pSMB->req_no_secext.Capabilities);
-+	/* pSMB->req_no_secext.CaseInsensitivePasswordLength =
-+	   CIFS_SESSION_KEY_SIZE; */
-+	pSMB->req_no_secext.CaseInsensitivePasswordLength = 0;
-+	pSMB->req_no_secext.CaseSensitivePasswordLength =
-+	    cpu_to_le16(CIFS_SESSION_KEY_SIZE);
-+	bcc_ptr = pByteArea(smb_buffer);
-+	/* memcpy(bcc_ptr, (char *) lm_session_key, CIFS_SESSION_KEY_SIZE);
-+	   bcc_ptr += CIFS_SESSION_KEY_SIZE; */
-+	memcpy(bcc_ptr, (char *) session_key, CIFS_SESSION_KEY_SIZE);
-+	bcc_ptr += CIFS_SESSION_KEY_SIZE;
-+
-+	if (ses->capabilities & CAP_UNICODE) {
-+		if ((long) bcc_ptr % 2) {	/* must be word aligned for Unicode */
-+			*bcc_ptr = 0;
-+			bcc_ptr++;
-+		}
-+		if(user == NULL)
-+			bytes_returned = 0; /* skill null user */
-+	        else
-+			bytes_returned =
-+			        cifs_strtoUCS((wchar_t *) bcc_ptr, user, 100,
-+					nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;	/* convert num 16 bit words to bytes */
-+		bcc_ptr += 2;	/* trailing null */
-+		if (domain == NULL)
-+			bytes_returned =
-+			    cifs_strtoUCS((wchar_t *) bcc_ptr,
-+					  "CIFS_LINUX_DOM", 32, nls_codepage);
-+		else
-+			bytes_returned =
-+			    cifs_strtoUCS((wchar_t *) bcc_ptr, domain, 64,
-+					  nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		bcc_ptr += 2;
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, "Linux version ",
-+				  32, nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, UTS_RELEASE, 32,
-+				  nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		bcc_ptr += 2;
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, CIFS_NETWORK_OPSYS,
-+				  64, nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		bcc_ptr += 2;
-+	} else {
-+		if(user != NULL) {                
-+		    strncpy(bcc_ptr, user, 200);
-+		    bcc_ptr += strnlen(user, 200);
-+		}
-+		*bcc_ptr = 0;
-+		bcc_ptr++;
-+		if (domain == NULL) {
-+			strcpy(bcc_ptr, "CIFS_LINUX_DOM");
-+			bcc_ptr += strlen("CIFS_LINUX_DOM") + 1;
-+		} else {
-+			strncpy(bcc_ptr, domain, 64);
-+			bcc_ptr += strnlen(domain, 64);
-+			*bcc_ptr = 0;
-+			bcc_ptr++;
-+		}
-+		strcpy(bcc_ptr, "Linux version ");
-+		bcc_ptr += strlen("Linux version ");
-+		strcpy(bcc_ptr, UTS_RELEASE);
-+		bcc_ptr += strlen(UTS_RELEASE) + 1;
-+		strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
-+		bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
-+	}
-+	BCC(smb_buffer) = (long) bcc_ptr - (long) pByteArea(smb_buffer);
-+	smb_buffer->smb_buf_length += BCC(smb_buffer);
-+	BCC(smb_buffer) = cpu_to_le16(BCC(smb_buffer));
-+
-+	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
-+			 &bytes_returned, 1);
-+	if (rc) {
-+/* rc = map_smb_to_linux_error(smb_buffer_response); now done in SendReceive */
-+	} else if ((smb_buffer_response->WordCount == 3)
-+		   || (smb_buffer_response->WordCount == 4)) {
-+		pSMBr->resp.Action = le16_to_cpu(pSMBr->resp.Action);
-+		if (pSMBr->resp.Action & GUEST_LOGIN)
-+			cFYI(1, (" Guest login"));	/* do we want to mark SesInfo struct ? */
-+		if (ses) {
-+			ses->Suid = smb_buffer_response->Uid;	/* UID left in wire format (le) */
-+			cFYI(1, ("UID = %d ", ses->Suid));
-+         /* response can have either 3 or 4 word count - Samba sends 3 */
-+			bcc_ptr = pByteArea(smb_buffer_response);	
-+			if ((pSMBr->resp.hdr.WordCount == 3)
-+			    || ((pSMBr->resp.hdr.WordCount == 4)
-+				&& (pSMBr->resp.SecurityBlobLength <
-+				    pSMBr->resp.ByteCount))) {
-+				if (pSMBr->resp.hdr.WordCount == 4)
-+					bcc_ptr +=
-+					    pSMBr->resp.SecurityBlobLength;
-+
-+				if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-+					if ((long) (bcc_ptr) % 2) {
-+						remaining_words =
-+						    (BCC(smb_buffer_response)
-+						     - 1) / 2;
-+						bcc_ptr++;	/* Unicode strings must be word aligned */
-+					} else {
-+						remaining_words =
-+						    BCC
-+						    (smb_buffer_response) / 2;
-+					}
-+					len =
-+					    UniStrnlen((wchar_t *) bcc_ptr,
-+						       remaining_words - 1);
-+/* We look for obvious messed up bcc or strings in response so we do not go off
-+   the end since (at least) WIN2K and Windows XP have a major bug in not null
-+   terminating last Unicode string in response  */
-+					ses->serverOS = cifs_kcalloc(2 * (len + 1), GFP_KERNEL);
-+					cifs_strfromUCS_le(ses->serverOS,
-+							   (wchar_t *)bcc_ptr, len,nls_codepage);
-+					bcc_ptr += 2 * (len + 1);
-+					remaining_words -= len + 1;
-+					ses->serverOS[2 * len] = 0;
-+					ses->serverOS[1 + (2 * len)] = 0;
-+					if (remaining_words > 0) {
-+						len = UniStrnlen((wchar_t *)bcc_ptr,
-+								 remaining_words
-+								 - 1);
-+						ses->serverNOS =cifs_kcalloc(2 * (len + 1),GFP_KERNEL);
-+						cifs_strfromUCS_le(ses->serverNOS,
-+								   (wchar_t *)bcc_ptr,len,nls_codepage);
-+						bcc_ptr += 2 * (len + 1);
-+						ses->serverNOS[2 * len] = 0;
-+						ses->serverNOS[1 + (2 * len)] = 0;
-+						remaining_words -= len + 1;
-+						if (remaining_words > 0) {
-+							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);	
-+          /* last string is not always null terminated (for e.g. for Windows XP & 2000) */
-+							ses->serverDomain =
-+							    cifs_kcalloc(2*(len+1),GFP_KERNEL);
-+							cifs_strfromUCS_le(ses->serverDomain,
-+							     (wchar_t *)bcc_ptr,len,nls_codepage);
-+							bcc_ptr += 2 * (len + 1);
-+							ses->serverDomain[2*len] = 0;
-+							ses->serverDomain[1+(2*len)] = 0;
-+						} /* else no more room so create dummy domain string */
-+						else
-+							ses->serverDomain =
-+							    cifs_kcalloc(2,
-+								    GFP_KERNEL);
-+					} else {	/* no room so create dummy domain and NOS string */
-+						ses->serverDomain =
-+						    cifs_kcalloc(2, GFP_KERNEL);
-+						ses->serverNOS =
-+						    cifs_kcalloc(2, GFP_KERNEL);
-+					}
-+				} else {	/* ASCII */
-+					len = strnlen(bcc_ptr, 1024);
-+					if (((long) bcc_ptr + len) - (long)
-+					    pByteArea(smb_buffer_response)
-+					    <= BCC(smb_buffer_response)) {
-+						ses->serverOS = cifs_kcalloc(len + 1,GFP_KERNEL);
-+						strncpy(ses->serverOS,bcc_ptr, len);
-+
-+						bcc_ptr += len;
-+						bcc_ptr[0] = 0;	/* null terminate the string */
-+						bcc_ptr++;
-+
-+						len = strnlen(bcc_ptr, 1024);
-+						ses->serverNOS = cifs_kcalloc(len + 1,GFP_KERNEL);
-+						strncpy(ses->serverNOS, bcc_ptr, len);
-+						bcc_ptr += len;
-+						bcc_ptr[0] = 0;
-+						bcc_ptr++;
-+
-+						len = strnlen(bcc_ptr, 1024);
-+						ses->serverDomain = cifs_kcalloc(len + 1,GFP_KERNEL);
-+						strncpy(ses->serverDomain, bcc_ptr, len);
-+						bcc_ptr += len;
-+						bcc_ptr[0] = 0;
-+						bcc_ptr++;
-+					} else
-+						cFYI(1,
-+						     ("Variable field of length %d extends beyond end of smb ",
-+						      len));
-+				}
-+			} else {
-+				cERROR(1,
-+				       (" Security Blob Length extends beyond end of SMB"));
-+			}
-+		} else {
-+			cERROR(1, ("No session structure passed in."));
-+		}
-+	} else {
-+		cERROR(1,
-+		       (" Invalid Word count %d: ",
-+			smb_buffer_response->WordCount));
-+		rc = -EIO;
-+	}
-+	
-+	if (smb_buffer)
-+		cifs_buf_release(smb_buffer);
-+
-+	return rc;
-+}
-+
-+static int
-+CIFSSpnegoSessSetup(unsigned int xid, struct cifsSesInfo *ses,
-+		char *SecurityBlob,int SecurityBlobLength,
-+		const struct nls_table *nls_codepage)
-+{
-+	struct smb_hdr *smb_buffer;
-+	struct smb_hdr *smb_buffer_response;
-+	SESSION_SETUP_ANDX *pSMB;
-+	SESSION_SETUP_ANDX *pSMBr;
-+	char *bcc_ptr;
-+	char *user = ses->userName;
-+	char *domain = ses->domainName;
-+	int rc = 0;
-+	int remaining_words = 0;
-+	int bytes_returned = 0;
-+	int len;
-+
-+	cFYI(1, ("In spnego sesssetup "));
-+
-+	smb_buffer = cifs_buf_get();
-+	if (smb_buffer == 0) {
-+		return -ENOMEM;
-+	}
-+	smb_buffer_response = smb_buffer;
-+	pSMBr = pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
-+
-+	/* send SMBsessionSetup here */
-+	header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
-+			NULL /* no tCon exists yet */ , 12 /* wct */ );
-+	pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
-+	pSMB->req.AndXCommand = 0xFF;
-+	pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
-+	pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-+
-+	if(ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-+		smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-+
-+	pSMB->req.Capabilities =
-+	    CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
-+	    CAP_EXTENDED_SECURITY;
-+	if (ses->capabilities & CAP_UNICODE) {
-+		smb_buffer->Flags2 |= SMBFLG2_UNICODE;
-+		pSMB->req.Capabilities |= CAP_UNICODE;
-+	}
-+	if (ses->capabilities & CAP_STATUS32) {
-+		smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
-+		pSMB->req.Capabilities |= CAP_STATUS32;
-+	}
-+	if (ses->capabilities & CAP_DFS) {
-+		smb_buffer->Flags2 |= SMBFLG2_DFS;
-+		pSMB->req.Capabilities |= CAP_DFS;
-+	}
-+	pSMB->req.Capabilities = cpu_to_le32(pSMB->req.Capabilities);
-+
-+	pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
-+	bcc_ptr = pByteArea(smb_buffer);
-+	memcpy(bcc_ptr, SecurityBlob, SecurityBlobLength);
-+	bcc_ptr += SecurityBlobLength;
-+
-+	if (ses->capabilities & CAP_UNICODE) {
-+		if ((long) bcc_ptr % 2) {	/* must be word aligned for Unicode strings */
-+			*bcc_ptr = 0;
-+			bcc_ptr++;
-+		}
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, user, 100, nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;	/* convert num of 16 bit words to bytes */
-+		bcc_ptr += 2;	/* trailing null */
-+		if (domain == NULL)
-+			bytes_returned =
-+			    cifs_strtoUCS((wchar_t *) bcc_ptr,
-+					  "CIFS_LINUX_DOM", 32, nls_codepage);
-+		else
-+			bytes_returned =
-+			    cifs_strtoUCS((wchar_t *) bcc_ptr, domain, 64,
-+					  nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		bcc_ptr += 2;
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, "Linux version ",
-+				  32, nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, UTS_RELEASE, 32,
-+				  nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		bcc_ptr += 2;
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, CIFS_NETWORK_OPSYS,
-+				  64, nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		bcc_ptr += 2;
-+	} else {
-+		strncpy(bcc_ptr, user, 200);
-+		bcc_ptr += strnlen(user, 200);
-+		*bcc_ptr = 0;
-+		bcc_ptr++;
-+		if (domain == NULL) {
-+			strcpy(bcc_ptr, "CIFS_LINUX_DOM");
-+			bcc_ptr += strlen("CIFS_LINUX_DOM") + 1;
-+		} else {
-+			strncpy(bcc_ptr, domain, 64);
-+			bcc_ptr += strnlen(domain, 64);
-+			*bcc_ptr = 0;
-+			bcc_ptr++;
-+		}
-+		strcpy(bcc_ptr, "Linux version ");
-+		bcc_ptr += strlen("Linux version ");
-+		strcpy(bcc_ptr, UTS_RELEASE);
-+		bcc_ptr += strlen(UTS_RELEASE) + 1;
-+		strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
-+		bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
-+	}
-+	BCC(smb_buffer) = (long) bcc_ptr - (long) pByteArea(smb_buffer);
-+	smb_buffer->smb_buf_length += BCC(smb_buffer);
-+	BCC(smb_buffer) = cpu_to_le16(BCC(smb_buffer));
-+
-+	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
-+			 &bytes_returned, 1);
-+	if (rc) {
-+/*    rc = map_smb_to_linux_error(smb_buffer_response);  *//* done in SendReceive now */
-+	} else if ((smb_buffer_response->WordCount == 3)
-+		   || (smb_buffer_response->WordCount == 4)) {
-+		pSMBr->resp.Action = le16_to_cpu(pSMBr->resp.Action);
-+		pSMBr->resp.SecurityBlobLength =
-+		    le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-+		if (pSMBr->resp.Action & GUEST_LOGIN)
-+			cFYI(1, (" Guest login"));	/* BB do we want to set anything in SesInfo struct ? */
-+		if (ses) {
-+			ses->Suid = smb_buffer_response->Uid;	/* UID left in wire format (le) */
-+			cFYI(1, ("UID = %d ", ses->Suid));
-+			bcc_ptr = pByteArea(smb_buffer_response);	/* response can have either 3 or 4 word count - Samba sends 3 */
-+
-+			/* BB Fix below to make endian neutral !! */
-+
-+			if ((pSMBr->resp.hdr.WordCount == 3)
-+			    || ((pSMBr->resp.hdr.WordCount == 4)
-+				&& (pSMBr->resp.SecurityBlobLength <
-+				    pSMBr->resp.ByteCount))) {
-+				if (pSMBr->resp.hdr.WordCount == 4) {
-+					bcc_ptr +=
-+					    pSMBr->resp.SecurityBlobLength;
-+					cFYI(1,
-+					     ("Security Blob Length %d ",
-+					      pSMBr->resp.SecurityBlobLength));
-+				}
-+
-+				if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-+					if ((long) (bcc_ptr) % 2) {
-+						remaining_words =
-+						    (BCC(smb_buffer_response)
-+						     - 1) / 2;
-+						bcc_ptr++;	/* Unicode strings must be word aligned */
-+					} else {
-+						remaining_words =
-+						    BCC
-+						    (smb_buffer_response) / 2;
-+					}
-+					len =
-+					    UniStrnlen((wchar_t *) bcc_ptr,
-+						       remaining_words - 1);
-+/* We look for obvious messed up bcc or strings in response so we do not go off
-+   the end since (at least) WIN2K and Windows XP have a major bug in not null
-+   terminating last Unicode string in response  */
-+					ses->serverOS =
-+					    cifs_kcalloc(2 * (len + 1), GFP_KERNEL);
-+					cifs_strfromUCS_le(ses->serverOS,
-+							   (wchar_t *)
-+							   bcc_ptr, len,
-+							   nls_codepage);
-+					bcc_ptr += 2 * (len + 1);
-+					remaining_words -= len + 1;
-+					ses->serverOS[2 * len] = 0;
-+					ses->serverOS[1 + (2 * len)] = 0;
-+					if (remaining_words > 0) {
-+						len = UniStrnlen((wchar_t *)bcc_ptr,
-+								 remaining_words
-+								 - 1);
-+						ses->serverNOS =
-+						    cifs_kcalloc(2 * (len + 1),
-+							    GFP_KERNEL);
-+						cifs_strfromUCS_le(ses->serverNOS,
-+								   (wchar_t *)bcc_ptr,
-+								   len,
-+								   nls_codepage);
-+						bcc_ptr += 2 * (len + 1);
-+						ses->serverNOS[2 * len] = 0;
-+						ses->serverNOS[1 + (2 * len)] = 0;
-+						remaining_words -= len + 1;
-+						if (remaining_words > 0) {
-+							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);	
-+                            /* last string is not always null terminated (for e.g. for Windows XP & 2000) */
-+							ses->serverDomain = cifs_kcalloc(2*(len+1),GFP_KERNEL);
-+							cifs_strfromUCS_le(ses->serverDomain,
-+							     (wchar_t *)bcc_ptr, 
-+                                 len,
-+							     nls_codepage);
-+							bcc_ptr += 2*(len+1);
-+							ses->serverDomain[2*len] = 0;
-+							ses->serverDomain[1+(2*len)] = 0;
-+						} /* else no more room so create dummy domain string */
-+						else
-+							ses->serverDomain =
-+							    cifs_kcalloc(2,GFP_KERNEL);
-+					} else {	/* no room so create dummy domain and NOS string */
-+						ses->serverDomain = cifs_kcalloc(2, GFP_KERNEL);
-+						ses->serverNOS = cifs_kcalloc(2, GFP_KERNEL);
-+					}
-+				} else {	/* ASCII */
-+
-+					len = strnlen(bcc_ptr, 1024);
-+					if (((long) bcc_ptr + len) - (long)
-+					    pByteArea(smb_buffer_response)
-+					    <= BCC(smb_buffer_response)) {
-+						ses->serverOS = cifs_kcalloc(len + 1, GFP_KERNEL);
-+						strncpy(ses->serverOS, bcc_ptr, len);
-+
-+						bcc_ptr += len;
-+						bcc_ptr[0] = 0;	/* null terminate the string */
-+						bcc_ptr++;
-+
-+						len = strnlen(bcc_ptr, 1024);
-+						ses->serverNOS = cifs_kcalloc(len + 1,GFP_KERNEL);
-+						strncpy(ses->serverNOS, bcc_ptr, len);
-+						bcc_ptr += len;
-+						bcc_ptr[0] = 0;
-+						bcc_ptr++;
-+
-+						len = strnlen(bcc_ptr, 1024);
-+						ses->serverDomain = cifs_kcalloc(len + 1, GFP_KERNEL);
-+						strncpy(ses->serverDomain, bcc_ptr, len);
-+						bcc_ptr += len;
-+						bcc_ptr[0] = 0;
-+						bcc_ptr++;
-+					} else
-+						cFYI(1,
-+						     ("Variable field of length %d extends beyond end of smb ",
-+						      len));
-+				}
-+			} else {
-+				cERROR(1,
-+				       (" Security Blob Length extends beyond end of SMB"));
-+			}
-+		} else {
-+			cERROR(1, ("No session structure passed in."));
-+		}
-+	} else {
-+		cERROR(1,
-+		       (" Invalid Word count %d: ",
-+			smb_buffer_response->WordCount));
-+		rc = -EIO;
-+	}
-+
-+	if (smb_buffer)
-+		cifs_buf_release(smb_buffer);
-+
-+	return rc;
-+}
-+
-+static int
-+CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
-+			      struct cifsSesInfo *ses, int * pNTLMv2_flag,
-+			      const struct nls_table *nls_codepage)
-+{
-+	struct smb_hdr *smb_buffer;
-+	struct smb_hdr *smb_buffer_response;
-+	SESSION_SETUP_ANDX *pSMB;
-+	SESSION_SETUP_ANDX *pSMBr;
-+	char *bcc_ptr;
-+	char *domain = ses->domainName;
-+	int rc = 0;
-+	int remaining_words = 0;
-+	int bytes_returned = 0;
-+	int len;
-+	int SecurityBlobLength = sizeof (NEGOTIATE_MESSAGE);
-+	PNEGOTIATE_MESSAGE SecurityBlob;
-+	PCHALLENGE_MESSAGE SecurityBlob2;
-+
-+	cFYI(1, ("In NTLMSSP sesssetup (negotiate) "));
-+	*pNTLMv2_flag = FALSE;
-+	smb_buffer = cifs_buf_get();
-+	if (smb_buffer == 0) {
-+		return -ENOMEM;
-+	}
-+	smb_buffer_response = smb_buffer;
-+	pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
-+	pSMBr = (SESSION_SETUP_ANDX *) smb_buffer_response;
-+
-+	/* send SMBsessionSetup here */
-+	header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
-+			NULL /* no tCon exists yet */ , 12 /* wct */ );
-+	pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
-+	pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
-+
-+	pSMB->req.AndXCommand = 0xFF;
-+	pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
-+	pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-+
-+	if(ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-+		smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-+
-+	pSMB->req.Capabilities =
-+	    CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
-+	    CAP_EXTENDED_SECURITY;
-+	if (ses->capabilities & CAP_UNICODE) {
-+		smb_buffer->Flags2 |= SMBFLG2_UNICODE;
-+		pSMB->req.Capabilities |= CAP_UNICODE;
-+	}
-+	if (ses->capabilities & CAP_STATUS32) {
-+		smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
-+		pSMB->req.Capabilities |= CAP_STATUS32;
-+	}
-+	if (ses->capabilities & CAP_DFS) {
-+		smb_buffer->Flags2 |= SMBFLG2_DFS;
-+		pSMB->req.Capabilities |= CAP_DFS;
-+	}
-+	pSMB->req.Capabilities = cpu_to_le32(pSMB->req.Capabilities);
-+
-+	bcc_ptr = (char *) &pSMB->req.SecurityBlob;
-+	SecurityBlob = (PNEGOTIATE_MESSAGE) bcc_ptr;
-+	strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
-+	SecurityBlob->MessageType = NtLmNegotiate;
-+	SecurityBlob->NegotiateFlags =
-+	    NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_NEGOTIATE_OEM |
-+	    NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_NTLM | 0x80000000 |
-+	    /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN | */ NTLMSSP_NEGOTIATE_128;
-+	if(sign_CIFS_PDUs)
-+		SecurityBlob->NegotiateFlags |= NTLMSSP_NEGOTIATE_SIGN;
-+	if(ntlmv2_support)
-+		SecurityBlob->NegotiateFlags |= NTLMSSP_NEGOTIATE_NTLMV2;
-+	/* setup pointers to domain name and workstation name */
-+	bcc_ptr += SecurityBlobLength;
-+
-+	SecurityBlob->WorkstationName.Buffer = 0;
-+	SecurityBlob->WorkstationName.Length = 0;
-+	SecurityBlob->WorkstationName.MaximumLength = 0;
-+
-+	if (domain == NULL) {
-+		SecurityBlob->DomainName.Buffer = 0;
-+		SecurityBlob->DomainName.Length = 0;
-+		SecurityBlob->DomainName.MaximumLength = 0;
-+	} else {
-+		SecurityBlob->NegotiateFlags |=
-+		    NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED;
-+		strncpy(bcc_ptr, domain, 63);
-+		SecurityBlob->DomainName.Length = strnlen(domain, 64);
-+		SecurityBlob->DomainName.MaximumLength =
-+		    cpu_to_le16(SecurityBlob->DomainName.Length);
-+		SecurityBlob->DomainName.Buffer =
-+		    cpu_to_le32((long) &SecurityBlob->
-+				DomainString -
-+				(long) &SecurityBlob->Signature);
-+		bcc_ptr += SecurityBlob->DomainName.Length;
-+		SecurityBlobLength += SecurityBlob->DomainName.Length;
-+		SecurityBlob->DomainName.Length =
-+		    cpu_to_le16(SecurityBlob->DomainName.Length);
-+	}
-+	if (ses->capabilities & CAP_UNICODE) {
-+		if ((long) bcc_ptr % 2) {
-+			*bcc_ptr = 0;
-+			bcc_ptr++;
-+		}
-+
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, "Linux version ",
-+				  32, nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, UTS_RELEASE, 32,
-+				  nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		bcc_ptr += 2;	/* null terminate Linux version */
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, CIFS_NETWORK_OPSYS,
-+				  64, nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		*(bcc_ptr + 1) = 0;
-+		*(bcc_ptr + 2) = 0;
-+		bcc_ptr += 2;	/* null terminate network opsys string */
-+		*(bcc_ptr + 1) = 0;
-+		*(bcc_ptr + 2) = 0;
-+		bcc_ptr += 2;	/* null domain */
-+	} else {		/* ASCII */
-+		strcpy(bcc_ptr, "Linux version ");
-+		bcc_ptr += strlen("Linux version ");
-+		strcpy(bcc_ptr, UTS_RELEASE);
-+		bcc_ptr += strlen(UTS_RELEASE) + 1;
-+		strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
-+		bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
-+		bcc_ptr++;	/* empty domain field */
-+		*bcc_ptr = 0;
-+	}
-+	SecurityBlob->NegotiateFlags =
-+	    cpu_to_le32(SecurityBlob->NegotiateFlags);
-+	pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
-+	BCC(smb_buffer) = (long) bcc_ptr - (long) pByteArea(smb_buffer);
-+	smb_buffer->smb_buf_length += BCC(smb_buffer);
-+	BCC(smb_buffer) = cpu_to_le16(BCC(smb_buffer));
-+
-+	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
-+			 &bytes_returned, 1);
-+
-+	if (smb_buffer_response->Status.CifsError ==
-+	    (NT_STATUS_MORE_PROCESSING_REQUIRED))
-+		rc = 0;
-+
-+	if (rc) {
-+/*    rc = map_smb_to_linux_error(smb_buffer_response);  *//* done in SendReceive now */
-+	} else if ((smb_buffer_response->WordCount == 3)
-+		   || (smb_buffer_response->WordCount == 4)) {
-+		pSMBr->resp.Action = le16_to_cpu(pSMBr->resp.Action);
-+		pSMBr->resp.SecurityBlobLength =
-+		    le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-+		if (pSMBr->resp.Action & GUEST_LOGIN)
-+			cFYI(1, (" Guest login"));	
-+        /* Do we want to set anything in SesInfo struct when guest login? */
-+
-+		bcc_ptr = pByteArea(smb_buffer_response);	
-+        /* response can have either 3 or 4 word count - Samba sends 3 */
-+
-+		SecurityBlob2 = (PCHALLENGE_MESSAGE) bcc_ptr;
-+		if (SecurityBlob2->MessageType != NtLmChallenge) {
-+			cFYI(1,
-+			     ("Unexpected NTLMSSP message type received %d",
-+			      SecurityBlob2->MessageType));
-+		} else if (ses) {
-+			ses->Suid = smb_buffer_response->Uid; /* UID left in le format */ 
-+			cFYI(1, ("UID = %d ", ses->Suid));
-+			if ((pSMBr->resp.hdr.WordCount == 3)
-+			    || ((pSMBr->resp.hdr.WordCount == 4)
-+				&& (pSMBr->resp.SecurityBlobLength <
-+				    pSMBr->resp.ByteCount))) {
-+				if (pSMBr->resp.hdr.WordCount == 4) {
-+					bcc_ptr +=
-+					    pSMBr->resp.SecurityBlobLength;
-+					cFYI(1,
-+					     ("Security Blob Length %d ",
-+					      pSMBr->resp.SecurityBlobLength));
-+				}
-+
-+				cFYI(1, ("NTLMSSP Challenge rcvd "));
-+
-+				memcpy(ses->server->cryptKey,
-+				       SecurityBlob2->Challenge,
-+				       CIFS_CRYPTO_KEY_SIZE);
-+				if(SecurityBlob2->NegotiateFlags & NTLMSSP_NEGOTIATE_NTLMV2)
-+					*pNTLMv2_flag = TRUE;
-+
-+				if((SecurityBlob2->NegotiateFlags & 
-+					NTLMSSP_NEGOTIATE_ALWAYS_SIGN) 
-+					|| (sign_CIFS_PDUs > 1))
-+						ses->server->secMode |= 
-+							SECMODE_SIGN_REQUIRED;	
-+				if ((SecurityBlob2->NegotiateFlags & 
-+					NTLMSSP_NEGOTIATE_SIGN) && (sign_CIFS_PDUs))
-+						ses->server->secMode |= 
-+							SECMODE_SIGN_ENABLED;
-+
-+				if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-+					if ((long) (bcc_ptr) % 2) {
-+						remaining_words =
-+						    (BCC(smb_buffer_response)
-+						     - 1) / 2;
-+						bcc_ptr++;	/* Unicode strings must be word aligned */
-+					} else {
-+						remaining_words =
-+						    BCC
-+						    (smb_buffer_response) / 2;
-+					}
-+					len =
-+					    UniStrnlen((wchar_t *) bcc_ptr,
-+						       remaining_words - 1);
-+/* We look for obvious messed up bcc or strings in response so we do not go off
-+   the end since (at least) WIN2K and Windows XP have a major bug in not null
-+   terminating last Unicode string in response  */
-+					ses->serverOS =
-+					    cifs_kcalloc(2 * (len + 1), GFP_KERNEL);
-+					cifs_strfromUCS_le(ses->serverOS,
-+							   (wchar_t *)
-+							   bcc_ptr, len,
-+							   nls_codepage);
-+					bcc_ptr += 2 * (len + 1);
-+					remaining_words -= len + 1;
-+					ses->serverOS[2 * len] = 0;
-+					ses->serverOS[1 + (2 * len)] = 0;
-+					if (remaining_words > 0) {
-+						len = UniStrnlen((wchar_t *)
-+								 bcc_ptr,
-+								 remaining_words
-+								 - 1);
-+						ses->serverNOS =
-+						    cifs_kcalloc(2 * (len + 1),
-+							    GFP_KERNEL);
-+						cifs_strfromUCS_le(ses->
-+								   serverNOS,
-+								   (wchar_t *)
-+								   bcc_ptr,
-+								   len,
-+								   nls_codepage);
-+						bcc_ptr += 2 * (len + 1);
-+						ses->serverNOS[2 * len] = 0;
-+						ses->serverNOS[1 +
-+							       (2 * len)] = 0;
-+						remaining_words -= len + 1;
-+						if (remaining_words > 0) {
-+							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);	
-+           /* last string is not always null terminated (for e.g. for Windows XP & 2000) */
-+							ses->serverDomain =
-+							    cifs_kcalloc(2 *
-+								    (len +
-+								     1),
-+								    GFP_KERNEL);
-+							cifs_strfromUCS_le
-+							    (ses->
-+							     serverDomain,
-+							     (wchar_t *)
-+							     bcc_ptr, len,
-+							     nls_codepage);
-+							bcc_ptr +=
-+							    2 * (len + 1);
-+							ses->
-+							    serverDomain[2
-+									 * len]
-+							    = 0;
-+							ses->
-+							    serverDomain[1
-+									 +
-+									 (2
-+									  *
-+									  len)]
-+							    = 0;
-+						} /* else no more room so create dummy domain string */
-+						else
-+							ses->serverDomain =
-+							    cifs_kcalloc(2,
-+								    GFP_KERNEL);
-+					} else {	/* no room so create dummy domain and NOS string */
-+						ses->serverDomain =
-+						    cifs_kcalloc(2, GFP_KERNEL);
-+						ses->serverNOS =
-+						    cifs_kcalloc(2, GFP_KERNEL);
-+					}
-+				} else {	/* ASCII */
-+					len = strnlen(bcc_ptr, 1024);
-+					if (((long) bcc_ptr + len) - (long)
-+					    pByteArea(smb_buffer_response)
-+					    <= BCC(smb_buffer_response)) {
-+						ses->serverOS =
-+						    cifs_kcalloc(len + 1,
-+							    GFP_KERNEL);
-+						strncpy(ses->serverOS,
-+							bcc_ptr, len);
-+
-+						bcc_ptr += len;
-+						bcc_ptr[0] = 0;	/* null terminate string */
-+						bcc_ptr++;
-+
-+						len = strnlen(bcc_ptr, 1024);
-+						ses->serverNOS =
-+						    cifs_kcalloc(len + 1,
-+							    GFP_KERNEL);
-+						strncpy(ses->serverNOS, bcc_ptr, len);
-+						bcc_ptr += len;
-+						bcc_ptr[0] = 0;
-+						bcc_ptr++;
-+
-+						len = strnlen(bcc_ptr, 1024);
-+						ses->serverDomain =
-+						    cifs_kcalloc(len + 1,
-+							    GFP_KERNEL);
-+						strncpy(ses->serverDomain, bcc_ptr, len);	
-+						bcc_ptr += len;
-+						bcc_ptr[0] = 0;
-+						bcc_ptr++;
-+					} else
-+						cFYI(1,
-+						     ("Variable field of length %d extends beyond end of smb ",
-+						      len));
-+				}
-+			} else {
-+				cERROR(1,
-+				       (" Security Blob Length extends beyond end of SMB"));
-+			}
-+		} else {
-+			cERROR(1, ("No session structure passed in."));
-+		}
-+	} else {
-+		cERROR(1,
-+		       (" Invalid Word count %d: ",
-+			smb_buffer_response->WordCount));
-+		rc = -EIO;
-+	}
-+
-+	if (smb_buffer)
-+		cifs_buf_release(smb_buffer);
-+
-+	return rc;
-+}
-+
-+static int
-+CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
-+		char *ntlm_session_key, int ntlmv2_flag,
-+		const struct nls_table *nls_codepage)
-+{
-+	struct smb_hdr *smb_buffer;
-+	struct smb_hdr *smb_buffer_response;
-+	SESSION_SETUP_ANDX *pSMB;
-+	SESSION_SETUP_ANDX *pSMBr;
-+	char *bcc_ptr;
-+	char *user = ses->userName;
-+	char *domain = ses->domainName;
-+	int rc = 0;
-+	int remaining_words = 0;
-+	int bytes_returned = 0;
-+	int len;
-+	int SecurityBlobLength = sizeof (AUTHENTICATE_MESSAGE);
-+	PAUTHENTICATE_MESSAGE SecurityBlob;
-+
-+	cFYI(1, ("In NTLMSSPSessSetup (Authenticate)"));
-+
-+	smb_buffer = cifs_buf_get();
-+	if (smb_buffer == 0) {
-+		return -ENOMEM;
-+	}
-+	smb_buffer_response = smb_buffer;
-+	pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
-+	pSMBr = (SESSION_SETUP_ANDX *) smb_buffer_response;
-+
-+	/* send SMBsessionSetup here */
-+	header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
-+			NULL /* no tCon exists yet */ , 12 /* wct */ );
-+	pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
-+	pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
-+	pSMB->req.AndXCommand = 0xFF;
-+	pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
-+	pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-+
-+	pSMB->req.hdr.Uid = ses->Suid;
-+
-+	if(ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-+		smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-+
-+	pSMB->req.Capabilities =
-+	    CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
-+	    CAP_EXTENDED_SECURITY;
-+	if (ses->capabilities & CAP_UNICODE) {
-+		smb_buffer->Flags2 |= SMBFLG2_UNICODE;
-+		pSMB->req.Capabilities |= CAP_UNICODE;
-+	}
-+	if (ses->capabilities & CAP_STATUS32) {
-+		smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
-+		pSMB->req.Capabilities |= CAP_STATUS32;
-+	}
-+	if (ses->capabilities & CAP_DFS) {
-+		smb_buffer->Flags2 |= SMBFLG2_DFS;
-+		pSMB->req.Capabilities |= CAP_DFS;
-+	}
-+	pSMB->req.Capabilities = cpu_to_le32(pSMB->req.Capabilities);
-+
-+	bcc_ptr = (char *) &pSMB->req.SecurityBlob;
-+	SecurityBlob = (PAUTHENTICATE_MESSAGE) bcc_ptr;
-+	strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
-+	SecurityBlob->MessageType = NtLmAuthenticate;
-+	bcc_ptr += SecurityBlobLength;
-+	SecurityBlob->NegotiateFlags =
-+	    NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_REQUEST_TARGET |
-+	    NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_TARGET_INFO |
-+	    0x80000000 | NTLMSSP_NEGOTIATE_128;
-+	if(sign_CIFS_PDUs)
-+		SecurityBlob->NegotiateFlags |= /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN |*/ NTLMSSP_NEGOTIATE_SIGN;
-+	if(ntlmv2_flag)
-+		SecurityBlob->NegotiateFlags |= NTLMSSP_NEGOTIATE_NTLMV2;
-+
-+/* setup pointers to domain name and workstation name */
-+
-+	SecurityBlob->WorkstationName.Buffer = 0;
-+	SecurityBlob->WorkstationName.Length = 0;
-+	SecurityBlob->WorkstationName.MaximumLength = 0;
-+	SecurityBlob->SessionKey.Length = 0;
-+	SecurityBlob->SessionKey.MaximumLength = 0;
-+	SecurityBlob->SessionKey.Buffer = 0;
-+
-+	SecurityBlob->LmChallengeResponse.Length = 0;
-+	SecurityBlob->LmChallengeResponse.MaximumLength = 0;
-+	SecurityBlob->LmChallengeResponse.Buffer = 0;
-+
-+	SecurityBlob->NtChallengeResponse.Length =
-+	    cpu_to_le16(CIFS_SESSION_KEY_SIZE);
-+	SecurityBlob->NtChallengeResponse.MaximumLength =
-+	    cpu_to_le16(CIFS_SESSION_KEY_SIZE);
-+	memcpy(bcc_ptr, ntlm_session_key, CIFS_SESSION_KEY_SIZE);
-+	SecurityBlob->NtChallengeResponse.Buffer =
-+	    cpu_to_le32(SecurityBlobLength);
-+	SecurityBlobLength += CIFS_SESSION_KEY_SIZE;
-+	bcc_ptr += CIFS_SESSION_KEY_SIZE;
-+
-+	if (ses->capabilities & CAP_UNICODE) {
-+		if (domain == NULL) {
-+			SecurityBlob->DomainName.Buffer = 0;
-+			SecurityBlob->DomainName.Length = 0;
-+			SecurityBlob->DomainName.MaximumLength = 0;
-+		} else {
-+			SecurityBlob->DomainName.Length =
-+			    cifs_strtoUCS((wchar_t *) bcc_ptr, domain, 64,
-+					  nls_codepage);
-+			SecurityBlob->DomainName.Length *= 2;
-+			SecurityBlob->DomainName.MaximumLength =
-+			    cpu_to_le16(SecurityBlob->DomainName.Length);
-+			SecurityBlob->DomainName.Buffer =
-+			    cpu_to_le32(SecurityBlobLength);
-+			bcc_ptr += SecurityBlob->DomainName.Length;
-+			SecurityBlobLength += SecurityBlob->DomainName.Length;
-+			SecurityBlob->DomainName.Length =
-+			    cpu_to_le16(SecurityBlob->DomainName.Length);
-+		}
-+		if (user == NULL) {
-+			SecurityBlob->UserName.Buffer = 0;
-+			SecurityBlob->UserName.Length = 0;
-+			SecurityBlob->UserName.MaximumLength = 0;
-+		} else {
-+			SecurityBlob->UserName.Length =
-+			    cifs_strtoUCS((wchar_t *) bcc_ptr, user, 64,
-+					  nls_codepage);
-+			SecurityBlob->UserName.Length *= 2;
-+			SecurityBlob->UserName.MaximumLength =
-+			    cpu_to_le16(SecurityBlob->UserName.Length);
-+			SecurityBlob->UserName.Buffer =
-+			    cpu_to_le32(SecurityBlobLength);
-+			bcc_ptr += SecurityBlob->UserName.Length;
-+			SecurityBlobLength += SecurityBlob->UserName.Length;
-+			SecurityBlob->UserName.Length =
-+			    cpu_to_le16(SecurityBlob->UserName.Length);
-+		}
-+
-+		/* SecurityBlob->WorkstationName.Length = cifs_strtoUCS((wchar_t *) bcc_ptr, "AMACHINE",64, nls_codepage);
-+		   SecurityBlob->WorkstationName.Length *= 2;
-+		   SecurityBlob->WorkstationName.MaximumLength = cpu_to_le16(SecurityBlob->WorkstationName.Length);
-+		   SecurityBlob->WorkstationName.Buffer = cpu_to_le32(SecurityBlobLength);
-+		   bcc_ptr += SecurityBlob->WorkstationName.Length;
-+		   SecurityBlobLength += SecurityBlob->WorkstationName.Length;
-+		   SecurityBlob->WorkstationName.Length = cpu_to_le16(SecurityBlob->WorkstationName.Length);  */
-+
-+		if ((long) bcc_ptr % 2) {
-+			*bcc_ptr = 0;
-+			bcc_ptr++;
-+		}
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, "Linux version ",
-+				  32, nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, UTS_RELEASE, 32,
-+				  nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		bcc_ptr += 2;	/* null term version string */
-+		bytes_returned =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, CIFS_NETWORK_OPSYS,
-+				  64, nls_codepage);
-+		bcc_ptr += 2 * bytes_returned;
-+		*(bcc_ptr + 1) = 0;
-+		*(bcc_ptr + 2) = 0;
-+		bcc_ptr += 2;	/* null terminate network opsys string */
-+		*(bcc_ptr + 1) = 0;
-+		*(bcc_ptr + 2) = 0;
-+		bcc_ptr += 2;	/* null domain */
-+	} else {		/* ASCII */
-+		if (domain == NULL) {
-+			SecurityBlob->DomainName.Buffer = 0;
-+			SecurityBlob->DomainName.Length = 0;
-+			SecurityBlob->DomainName.MaximumLength = 0;
-+		} else {
-+			SecurityBlob->NegotiateFlags |=
-+			    NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED;
-+			strncpy(bcc_ptr, domain, 63);
-+			SecurityBlob->DomainName.Length = strnlen(domain, 64);
-+			SecurityBlob->DomainName.MaximumLength =
-+			    cpu_to_le16(SecurityBlob->DomainName.Length);
-+			SecurityBlob->DomainName.Buffer =
-+			    cpu_to_le32(SecurityBlobLength);
-+			bcc_ptr += SecurityBlob->DomainName.Length;
-+			SecurityBlobLength += SecurityBlob->DomainName.Length;
-+			SecurityBlob->DomainName.Length =
-+			    cpu_to_le16(SecurityBlob->DomainName.Length);
-+		}
-+		if (user == NULL) {
-+			SecurityBlob->UserName.Buffer = 0;
-+			SecurityBlob->UserName.Length = 0;
-+			SecurityBlob->UserName.MaximumLength = 0;
-+		} else {
-+			strncpy(bcc_ptr, user, 63);
-+			SecurityBlob->UserName.Length = strnlen(user, 64);
-+			SecurityBlob->UserName.MaximumLength =
-+			    cpu_to_le16(SecurityBlob->UserName.Length);
-+			SecurityBlob->UserName.Buffer =
-+			    cpu_to_le32(SecurityBlobLength);
-+			bcc_ptr += SecurityBlob->UserName.Length;
-+			SecurityBlobLength += SecurityBlob->UserName.Length;
-+			SecurityBlob->UserName.Length =
-+			    cpu_to_le16(SecurityBlob->UserName.Length);
-+		}
-+		/* BB fill in our workstation name if known BB */
-+
-+		strcpy(bcc_ptr, "Linux version ");
-+		bcc_ptr += strlen("Linux version ");
-+		strcpy(bcc_ptr, UTS_RELEASE);
-+		bcc_ptr += strlen(UTS_RELEASE) + 1;
-+		strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
-+		bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
-+		bcc_ptr++;	/* null domain */
-+		*bcc_ptr = 0;
-+	}
-+	SecurityBlob->NegotiateFlags =
-+	    cpu_to_le32(SecurityBlob->NegotiateFlags);
-+	pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
-+	BCC(smb_buffer) = (long) bcc_ptr - (long) pByteArea(smb_buffer);
-+	smb_buffer->smb_buf_length += BCC(smb_buffer);
-+	BCC(smb_buffer) = cpu_to_le16(BCC(smb_buffer));
-+
-+	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
-+			 &bytes_returned, 1);
-+	if (rc) {
-+/*    rc = map_smb_to_linux_error(smb_buffer_response);  *//* done in SendReceive now */
-+	} else if ((smb_buffer_response->WordCount == 3)
-+		   || (smb_buffer_response->WordCount == 4)) {
-+		pSMBr->resp.Action = le16_to_cpu(pSMBr->resp.Action);
-+		pSMBr->resp.SecurityBlobLength =
-+		    le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-+		if (pSMBr->resp.Action & GUEST_LOGIN)
-+			cFYI(1, (" Guest login"));	/* BB do we want to set anything in SesInfo struct ? */
-+/*        if(SecurityBlob2->MessageType != NtLm??){                               
-+                 cFYI("Unexpected message type on auth response is %d ")); 
-+        } */
-+		if (ses) {
-+			cFYI(1,
-+			     ("Does UID on challenge %d match auth response UID %d ",
-+			      ses->Suid, smb_buffer_response->Uid));
-+			ses->Suid = smb_buffer_response->Uid; /* UID left in wire format */
-+			bcc_ptr = pByteArea(smb_buffer_response);	
-+            /* response can have either 3 or 4 word count - Samba sends 3 */
-+			if ((pSMBr->resp.hdr.WordCount == 3)
-+			    || ((pSMBr->resp.hdr.WordCount == 4)
-+				&& (pSMBr->resp.SecurityBlobLength <
-+				    pSMBr->resp.ByteCount))) {
-+				if (pSMBr->resp.hdr.WordCount == 4) {
-+					bcc_ptr +=
-+					    pSMBr->resp.SecurityBlobLength;
-+					cFYI(1,
-+					     ("Security Blob Length %d ",
-+					      pSMBr->resp.SecurityBlobLength));
-+				}
-+
-+				cFYI(1,
-+				     ("NTLMSSP response to Authenticate "));
-+
-+				if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-+					if ((long) (bcc_ptr) % 2) {
-+						remaining_words =
-+						    (BCC(smb_buffer_response)
-+						     - 1) / 2;
-+						bcc_ptr++;	/* Unicode strings must be word aligned */
-+					} else {
-+						remaining_words = BCC(smb_buffer_response) / 2;
-+					}
-+					len =
-+					    UniStrnlen((wchar_t *) bcc_ptr,remaining_words - 1);
-+/* We look for obvious messed up bcc or strings in response so we do not go off
-+  the end since (at least) WIN2K and Windows XP have a major bug in not null
-+  terminating last Unicode string in response  */
-+					ses->serverOS =
-+					    cifs_kcalloc(2 * (len + 1), GFP_KERNEL);
-+					cifs_strfromUCS_le(ses->serverOS,
-+							   (wchar_t *)
-+							   bcc_ptr, len,
-+							   nls_codepage);
-+					bcc_ptr += 2 * (len + 1);
-+					remaining_words -= len + 1;
-+					ses->serverOS[2 * len] = 0;
-+					ses->serverOS[1 + (2 * len)] = 0;
-+					if (remaining_words > 0) {
-+						len = UniStrnlen((wchar_t *)
-+								 bcc_ptr,
-+								 remaining_words
-+								 - 1);
-+						ses->serverNOS =
-+						    cifs_kcalloc(2 * (len + 1),
-+							    GFP_KERNEL);
-+						cifs_strfromUCS_le(ses->
-+								   serverNOS,
-+								   (wchar_t *)
-+								   bcc_ptr,
-+								   len,
-+								   nls_codepage);
-+						bcc_ptr += 2 * (len + 1);
-+						ses->serverNOS[2 * len] = 0;
-+						ses->serverNOS[1+(2*len)] = 0;
-+						remaining_words -= len + 1;
-+						if (remaining_words > 0) {
-+							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);	
-+     /* last string not always null terminated (e.g. for Windows XP & 2000) */
-+							ses->serverDomain =
-+							    cifs_kcalloc(2 *
-+								    (len +
-+								     1),
-+								    GFP_KERNEL);
-+							cifs_strfromUCS_le
-+							    (ses->
-+							     serverDomain,
-+							     (wchar_t *)
-+							     bcc_ptr, len,
-+							     nls_codepage);
-+							bcc_ptr +=
-+							    2 * (len + 1);
-+							ses->
-+							    serverDomain[2
-+									 * len]
-+							    = 0;
-+							ses->
-+							    serverDomain[1
-+									 +
-+									 (2
-+									  *
-+									  len)]
-+							    = 0;
-+						} /* else no more room so create dummy domain string */
-+						else
-+							ses->serverDomain = cifs_kcalloc(2,GFP_KERNEL);
-+					} else {  /* no room so create dummy domain and NOS string */
-+						ses->serverDomain = cifs_kcalloc(2, GFP_KERNEL);
-+						ses->serverNOS = cifs_kcalloc(2, GFP_KERNEL);
-+					}
-+				} else {	/* ASCII */
-+					len = strnlen(bcc_ptr, 1024);
-+					if (((long) bcc_ptr + len) - 
-+                        (long) pByteArea(smb_buffer_response) 
-+                            <= BCC(smb_buffer_response)) {
-+						ses->serverOS = cifs_kcalloc(len + 1,GFP_KERNEL);
-+						strncpy(ses->serverOS,bcc_ptr, len);
-+
-+						bcc_ptr += len;
-+						bcc_ptr[0] = 0;	/* null terminate the string */
-+						bcc_ptr++;
-+
-+						len = strnlen(bcc_ptr, 1024);
-+						ses->serverNOS = cifs_kcalloc(len+1,GFP_KERNEL);
-+						strncpy(ses->serverNOS, bcc_ptr, len);	
-+						bcc_ptr += len;
-+						bcc_ptr[0] = 0;
-+						bcc_ptr++;
-+
-+						len = strnlen(bcc_ptr, 1024);
-+						ses->serverDomain = cifs_kcalloc(len+1,GFP_KERNEL);
-+						strncpy(ses->serverDomain, bcc_ptr, len);
-+						bcc_ptr += len;
-+						bcc_ptr[0] = 0;
-+						bcc_ptr++;
-+					} else
-+						cFYI(1,
-+						     ("Variable field of length %d extends beyond end of smb ",
-+						      len));
-+				}
-+			} else {
-+				cERROR(1,
-+				       (" Security Blob Length extends beyond end of SMB"));
-+			}
-+		} else {
-+			cERROR(1, ("No session structure passed in."));
-+		}
-+	} else {
-+		cERROR(1,
-+		       (" Invalid Word count %d: ",
-+			smb_buffer_response->WordCount));
-+		rc = -EIO;
-+	}
-+
-+	if (smb_buffer)
-+		cifs_buf_release(smb_buffer);
-+
-+	return rc;
-+}
-+
-+int
-+CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
-+	 const char *tree, struct cifsTconInfo *tcon,
-+	 const struct nls_table *nls_codepage)
-+{
-+	struct smb_hdr *smb_buffer;
-+	struct smb_hdr *smb_buffer_response;
-+	TCONX_REQ *pSMB;
-+	TCONX_RSP *pSMBr;
-+	char *bcc_ptr;
-+	int rc = 0;
-+	int length;
-+
-+	if (ses == NULL)
-+		return -EIO;
-+
-+	smb_buffer = cifs_buf_get();
-+	if (smb_buffer == 0) {
-+		return -ENOMEM;
-+	}
-+	smb_buffer_response = smb_buffer;
-+
-+	header_assemble(smb_buffer, SMB_COM_TREE_CONNECT_ANDX,
-+			NULL /*no tid */ , 4 /*wct */ );
-+	smb_buffer->Uid = ses->Suid;
-+	pSMB = (TCONX_REQ *) smb_buffer;
-+	pSMBr = (TCONX_RSP *) smb_buffer_response;
-+
-+	pSMB->AndXCommand = 0xFF;
-+	pSMB->Flags = cpu_to_le16(TCON_EXTENDED_SECINFO);
-+	pSMB->PasswordLength = cpu_to_le16(1);	/* minimum */
-+	bcc_ptr = &(pSMB->Password[0]);
-+	bcc_ptr++;		/* skip password */
-+
-+	if(ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-+		smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-+
-+	if (ses->capabilities & CAP_STATUS32) {
-+		smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
-+	}
-+	if (ses->capabilities & CAP_DFS) {
-+		smb_buffer->Flags2 |= SMBFLG2_DFS;
-+	}
-+	if (ses->capabilities & CAP_UNICODE) {
-+		smb_buffer->Flags2 |= SMBFLG2_UNICODE;
-+		length =
-+		    cifs_strtoUCS((wchar_t *) bcc_ptr, tree, 100, nls_codepage);
-+		bcc_ptr += 2 * length;	/* convert num of 16 bit words to bytes */
-+		bcc_ptr += 2;	/* skip trailing null */
-+	} else {		/* ASCII */
-+
-+		strcpy(bcc_ptr, tree);
-+		bcc_ptr += strlen(tree) + 1;
-+	}
-+	strcpy(bcc_ptr, "?????");
-+	bcc_ptr += strlen("?????");
-+	bcc_ptr += 1;
-+	BCC(smb_buffer) = (long) bcc_ptr - (long) pByteArea(smb_buffer);
-+	smb_buffer->smb_buf_length += BCC(smb_buffer);
-+	BCC(smb_buffer) = cpu_to_le16(BCC(smb_buffer));
-+
-+	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response, &length, 0);
-+
-+	/* if (rc) rc = map_smb_to_linux_error(smb_buffer_response); */
-+	/* above now done in SendReceive */
-+	if ((rc == 0) && (tcon != NULL)) {
-+        tcon->tidStatus = CifsGood;
-+		tcon->tid = smb_buffer_response->Tid;
-+		bcc_ptr = pByteArea(smb_buffer_response);
-+		length = strnlen(bcc_ptr, BCC(smb_buffer_response) - 2);
-+        /* skip service field (NB: this field is always ASCII) */
-+		bcc_ptr += length + 1;	
-+		strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
-+		if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-+			length = UniStrnlen((wchar_t *) bcc_ptr, 512);
-+			if (((long) bcc_ptr + (2 * length)) -
-+			    (long) pByteArea(smb_buffer_response) <=
-+			    BCC(smb_buffer_response)) {
-+				if(tcon->nativeFileSystem)
-+					kfree(tcon->nativeFileSystem);
-+				tcon->nativeFileSystem =
-+				    cifs_kcalloc(length + 2, GFP_KERNEL);
-+				cifs_strfromUCS_le(tcon->nativeFileSystem,
-+						   (wchar_t *) bcc_ptr,
-+						   length, nls_codepage);
-+				bcc_ptr += 2 * length;
-+				bcc_ptr[0] = 0;	/* null terminate the string */
-+				bcc_ptr[1] = 0;
-+				bcc_ptr += 2;
-+			}
-+			/* else do not bother copying these informational fields */
-+		} else {
-+			length = strnlen(bcc_ptr, 1024);
-+			if (((long) bcc_ptr + length) -
-+			    (long) pByteArea(smb_buffer_response) <=
-+			    BCC(smb_buffer_response)) {
-+				if(tcon->nativeFileSystem)
-+					kfree(tcon->nativeFileSystem);
-+				tcon->nativeFileSystem =
-+				    cifs_kcalloc(length + 1, GFP_KERNEL);
-+				strncpy(tcon->nativeFileSystem, bcc_ptr,
-+					length);
-+			}
-+			/* else do not bother copying these informational fields */
-+		}
-+		tcon->Flags = le16_to_cpu(pSMBr->OptionalSupport);
-+		cFYI(1, ("Tcon flags: 0x%x ", tcon->Flags));
-+	} else if ((rc == 0) && tcon == NULL) {
-+        /* all we need to save for IPC$ connection */
-+		ses->ipc_tid = smb_buffer_response->Tid;
-+	}
-+
-+	if (smb_buffer)
-+		cifs_buf_release(smb_buffer);
-+	return rc;
-+}
-+
-+int
-+cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb)
-+{
-+	int rc = 0;
-+	int xid;
-+	struct cifsSesInfo *ses = NULL;
-+	struct task_struct *cifsd_task;
-+
-+	xid = GetXid();
-+
-+	if (cifs_sb->tcon) {
-+		ses = cifs_sb->tcon->ses; /* save ptr to ses before delete tcon!*/
-+		rc = CIFSSMBTDis(xid, cifs_sb->tcon);
-+		if (rc == -EBUSY) {
-+			FreeXid(xid);
-+			return 0;
-+		}
-+		tconInfoFree(cifs_sb->tcon);
-+		if ((ses) && (ses->server)) {
-+			/* save off task so we do not refer to ses later */
-+			cifsd_task = ses->server->tsk;
-+			cFYI(1, ("About to do SMBLogoff "));
-+			rc = CIFSSMBLogoff(xid, ses);
-+			if (rc == -EBUSY) {
-+				FreeXid(xid);
-+				return 0;
-+			} else if (rc == -ESHUTDOWN) {
-+				cFYI(1,("Waking up socket by sending it signal"));
-+				send_sig(SIGKILL,cifsd_task,1);
-+				rc = 0;
-+			} /* else - we have an smb session
-+				left on this socket do not kill cifsd */
-+		} else
-+			cFYI(1, ("No session or bad tcon"));
-+	}
-+	
-+	cifs_sb->tcon = NULL;
-+	if (ses) {
-+		set_current_state(TASK_INTERRUPTIBLE);
-+		schedule_timeout(HZ / 2);
-+	}
-+	if (ses)
-+		sesInfoFree(ses);
-+
-+	FreeXid(xid);
-+	return rc;		/* BB check if we should always return zero here */
-+} 
-+
-+int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
-+					   struct nls_table * nls_info)
-+{
-+	int rc = 0;
-+	char ntlm_session_key[CIFS_SESSION_KEY_SIZE];
-+	int ntlmv2_flag = FALSE;
-+
-+	/* what if server changes its buffer size after dropping the session? */
-+	if(pSesInfo->server->maxBuf == 0) /* no need to send on reconnect */ {
-+		rc = CIFSSMBNegotiate(xid, pSesInfo);
-+		if(rc == -EAGAIN) /* retry only once on 1st time connection */ {
-+			rc = CIFSSMBNegotiate(xid, pSesInfo);
-+			if(rc == -EAGAIN) 
-+				rc = -EHOSTDOWN;
-+		}
-+		if(rc == 0) {
-+			spin_lock(&GlobalMid_Lock);
-+			if(pSesInfo->server->tcpStatus != CifsExiting)
-+				pSesInfo->server->tcpStatus = CifsGood;
-+			else
-+				rc = -EHOSTDOWN;
-+			spin_unlock(&GlobalMid_Lock);
-+
-+		}
-+	}
-+	if (!rc) {
-+		pSesInfo->capabilities = pSesInfo->server->capabilities;
-+		if(linuxExtEnabled == 0)
-+			pSesInfo->capabilities &= (~CAP_UNIX);
-+		pSesInfo->sequence_number = 0;
-+		cFYI(1,("Security Mode: 0x%x Capabilities: 0x%x Time Zone: %d",
-+			pSesInfo->server->secMode,
-+			pSesInfo->server->capabilities,
-+			pSesInfo->server->timeZone));
-+		if (extended_security
-+				&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
-+				&& (pSesInfo->server->secType == NTLMSSP)) {
-+			cFYI(1, ("New style sesssetup "));
-+			rc = CIFSSpnegoSessSetup(xid, pSesInfo,
-+				NULL /* security blob */, 
-+				0 /* blob length */,
-+				nls_info);
-+		} else if (extended_security
-+			   && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
-+			   && (pSesInfo->server->secType == RawNTLMSSP)) {
-+			cFYI(1, ("NTLMSSP sesssetup "));
-+			rc = CIFSNTLMSSPNegotiateSessSetup(xid,
-+						pSesInfo,
-+						&ntlmv2_flag,
-+						nls_info);
-+			if (!rc) {
-+				if(ntlmv2_flag) {
-+					char * v2_response;
-+					cFYI(1,("Can use more secure NTLM version 2 password hash"));
-+					CalcNTLMv2_partial_mac_key(pSesInfo, 
-+						nls_info);
-+					v2_response = kmalloc(16 + 64 /* blob */, GFP_KERNEL);
-+					if(v2_response) {
-+						CalcNTLMv2_response(pSesInfo,v2_response);
-+/*						cifs_calculate_ntlmv2_mac_key(pSesInfo->mac_signing_key, response, ntlm_session_key, */
-+						kfree(v2_response);
-+					/* BB Put dummy sig in SessSetup PDU? */
-+					} else
-+						rc = -ENOMEM;
-+
-+				} else {
-+					SMBNTencrypt(pSesInfo->password,
-+						pSesInfo->server->cryptKey,
-+						ntlm_session_key);
-+
-+					cifs_calculate_mac_key(pSesInfo->mac_signing_key,
-+						ntlm_session_key,
-+						pSesInfo->password);
-+				}
-+			/* for better security the weaker lanman hash not sent
-+			   in AuthSessSetup so we no longer calculate it */
-+
-+				rc = CIFSNTLMSSPAuthSessSetup(xid,
-+					pSesInfo,
-+					ntlm_session_key,
-+					ntlmv2_flag,
-+					nls_info);
-+			}
-+		} else { /* old style NTLM 0.12 session setup */
-+			SMBNTencrypt(pSesInfo->password,
-+				pSesInfo->server->cryptKey,
-+				ntlm_session_key);
-+
-+			cifs_calculate_mac_key(pSesInfo->mac_signing_key, 
-+				ntlm_session_key, pSesInfo->password);
-+			rc = CIFSSessSetup(xid, pSesInfo,
-+				ntlm_session_key, nls_info);
-+		}
-+		if (rc) {
-+			cERROR(1,("Send error in SessSetup = %d",rc));
-+		} else {
-+			cFYI(1,("CIFS Session Established successfully"));
-+			pSesInfo->status = CifsGood;
-+		}
-+	}
-+	return rc;
-+}
-+
-diff -urN linux-2.4.29.old/fs/cifs/dir.c linux-2.4.29/fs/cifs/dir.c
---- linux-2.4.29.old/fs/cifs/dir.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/dir.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,425 @@
-+/*
-+ *   fs/cifs/dir.c
-+ *
-+ *   vfs operations that deal with dentries
-+ * 
-+ *   Copyright (C) International Business Machines  Corp., 2002,2003
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/fs.h>
-+#include <linux/stat.h>
-+#include <linux/slab.h>
-+#include "cifsfs.h"
-+#include "cifspdu.h"
-+#include "cifsglob.h"
-+#include "cifsproto.h"
-+#include "cifs_debug.h"
-+#include "cifs_fs_sb.h"
-+
-+void
-+renew_parental_timestamps(struct dentry *direntry)
-+{
-+	/* BB check if there is a way to get the kernel to do this or if we really need this */
-+	do {
-+		direntry->d_time = jiffies;
-+		direntry = direntry->d_parent;
-+	} while (!IS_ROOT(direntry));	
-+}
-+
-+/* Note: caller must free return buffer */
-+char *
-+build_path_from_dentry(struct dentry *direntry)
-+{
-+	struct dentry *temp;
-+	int namelen = 0;
-+	char *full_path;
-+
-+	if(direntry == NULL)
-+		return NULL;  /* not much we can do if dentry is freed and
-+		we need to reopen the file after it was closed implicitly
-+		when the server crashed */
-+
-+cifs_bp_rename_retry:
-+	for (temp = direntry; !IS_ROOT(temp);) {
-+		namelen += (1 + temp->d_name.len);
-+		temp = temp->d_parent;
-+		if(temp == NULL) {
-+			cERROR(1,("corrupt dentry"));
-+			return NULL;
-+		}
-+	}
-+
-+	full_path = kmalloc(namelen+1, GFP_KERNEL);
-+	if(full_path == NULL)
-+		return full_path;
-+	full_path[namelen] = 0;	/* trailing null */
-+
-+	for (temp = direntry; !IS_ROOT(temp);) {
-+		namelen -= 1 + temp->d_name.len;
-+		if (namelen < 0) {
-+			break;
-+		} else {
-+			full_path[namelen] = '\\';
-+			strncpy(full_path + namelen + 1, temp->d_name.name,
-+				temp->d_name.len);
-+			cFYI(0, (" name: %s ", full_path + namelen));
-+		}
-+		temp = temp->d_parent;
-+		if(temp == NULL) {
-+			cERROR(1,("corrupt dentry"));
-+			kfree(full_path);
-+			return NULL;
-+		}
-+	}
-+	if (namelen != 0) {
-+		cERROR(1,
-+		       ("We did not end path lookup where we expected namelen is %d",
-+			namelen));
-+		/* presumably this is only possible if we were racing with a rename 
-+		of one of the parent directories  (we can not lock the dentries
-+		above us to prevent this, but retrying should be harmless) */
-+		kfree(full_path);
-+		namelen = 0;
-+		goto cifs_bp_rename_retry;
-+	}
-+
-+	return full_path;
-+}
-+
-+/* Note: caller must free return buffer */
-+char *
-+build_wildcard_path_from_dentry(struct dentry *direntry)
-+{
-+	struct dentry *temp;
-+	int namelen = 0;
-+	char *full_path;
-+
-+	if(direntry == NULL)
-+		return NULL;  /* not much we can do if dentry is freed and
-+		we need to reopen the file after it was closed implicitly
-+		when the server crashed */
-+
-+cifs_bwp_rename_retry:
-+	for (temp = direntry; !IS_ROOT(temp);) {
-+		namelen += (1 + temp->d_name.len);
-+		temp = temp->d_parent;
-+		if(temp == NULL) {
-+			cERROR(1,("corrupt dentry"));
-+			return NULL;
-+		}
-+	}
-+
-+	full_path = kmalloc(namelen+3, GFP_KERNEL);
-+	if(full_path == NULL)
-+		return full_path;
-+
-+	full_path[namelen] = '\\';
-+	full_path[namelen+1] = '*';
-+	full_path[namelen+2] = 0;  /* trailing null */
-+
-+	for (temp = direntry; !IS_ROOT(temp);) {
-+		namelen -= 1 + temp->d_name.len;
-+		if (namelen < 0) {
-+			break;
-+		} else {
-+			full_path[namelen] = '\\';
-+			strncpy(full_path + namelen + 1, temp->d_name.name,
-+				temp->d_name.len);
-+			cFYI(0, (" name: %s ", full_path + namelen));
-+		}
-+		temp = temp->d_parent;
-+		if(temp == NULL) {
-+			cERROR(1,("corrupt dentry"));
-+			kfree(full_path);
-+			return NULL;
-+		}
-+	}
-+	if (namelen != 0) {
-+		cERROR(1,
-+		       ("We did not end path lookup where we expected namelen is %d",
-+			namelen));
-+		/* presumably this is only possible if we were racing with a rename 
-+		of one of the parent directories  (we can not lock the dentries
-+		above us to prevent this, but retrying should be harmless) */
-+		kfree(full_path);
-+		namelen = 0;
-+		goto cifs_bwp_rename_retry;
-+	}
-+
-+	return full_path;
-+}
-+
-+/* Inode operations in similar order to how they appear in the Linux file fs.h */
-+
-+int
-+cifs_create(struct inode *inode, struct dentry *direntry, int mode)
-+{
-+	int rc = -ENOENT;
-+	int xid;
-+	int oplock = 0; /* no sense requested oplock if we are just going to
-+			 immediately  close the file */
-+	__u16 fileHandle;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	char *full_path = NULL;
-+	FILE_ALL_INFO * buf = NULL;
-+	struct inode *newinode = NULL;
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	down(&direntry->d_sb->s_vfs_rename_sem);
-+	full_path = build_path_from_dentry(direntry);
-+	up(&direntry->d_sb->s_vfs_rename_sem);
-+	if(full_path == NULL) {
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+
-+	/* BB add processing to set equivalent of mode - e.g. via CreateX with ACLs */
-+
-+        buf = kmalloc(sizeof(FILE_ALL_INFO),GFP_KERNEL);
-+	rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OVERWRITE_IF,
-+			GENERIC_WRITE, CREATE_NOT_DIR,
-+			&fileHandle, &oplock, buf, cifs_sb->local_nls);
-+	if (rc) {
-+		cFYI(1, ("cifs_create returned 0x%x ", rc));
-+	} else {
-+	/* BB for case of overwriting existing file can we use the inode that was
-+		 passed in rather than creating new one?? */
-+		if (pTcon->ses->capabilities & CAP_UNIX)
-+			rc = cifs_get_inode_info_unix(&newinode, full_path,
-+						      inode->i_sb,xid);
-+		else
-+			rc = cifs_get_inode_info(&newinode, full_path,
-+						 buf, inode->i_sb,xid);
-+
-+		if (rc != 0) {
-+			cFYI(1,("Create worked but get_inode_info failed with rc = %d",
-+			      rc));
-+		} else {
-+			direntry->d_op = &cifs_dentry_ops;
-+			d_instantiate(direntry, newinode);
-+		}
-+		CIFSSMBClose(xid, pTcon, fileHandle);
-+
-+		if(newinode) {
-+			newinode->i_mode = mode;
-+			if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)                
-+				CIFSSMBUnixSetPerms(xid, pTcon, full_path, inode->i_mode,
-+					(__u64)-1, 
-+					(__u64)-1,
-+					0 /* dev */,
-+					cifs_sb->local_nls);
-+			else { /* BB implement via Windows security descriptors */
-+			/* eg CIFSSMBWinSetPerms(xid,pTcon,full_path,mode,-1,-1,local_nls);*/
-+			/* in the meantime could set r/o dos attribute when perms are eg:
-+				mode & 0222 == 0 */
-+			}
-+		}
-+	} 
-+
-+	if (buf)
-+	    kfree(buf);
-+	if (full_path)
-+	    kfree(full_path);
-+	FreeXid(xid);
-+
-+	return rc;
-+}
-+
-+int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode, int device_number) 
-+{
-+	int rc = -EPERM;
-+	int xid;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	char *full_path = NULL;
-+	struct inode * newinode = NULL;
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	down(&direntry->d_sb->s_vfs_rename_sem);
-+	full_path = build_path_from_dentry(direntry);
-+	up(&direntry->d_sb->s_vfs_rename_sem);
-+	if(full_path == NULL)
-+		rc = -ENOMEM;
-+	
-+	if (full_path && (pTcon->ses->capabilities & CAP_UNIX)) {
-+		rc = CIFSSMBUnixSetPerms(xid, pTcon,
-+			full_path, mode, current->euid, current->egid,
-+			device_number, cifs_sb->local_nls);
-+		if(!rc) {
-+			rc = cifs_get_inode_info_unix(&newinode, full_path,
-+						inode->i_sb,xid);
-+			direntry->d_op = &cifs_dentry_ops;
-+			if(rc == 0)
-+				d_instantiate(direntry, newinode);
-+		}
-+	}
-+
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+
-+	return rc;
-+}
-+
-+
-+struct dentry *
-+cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry)
-+{
-+	int xid;
-+	int rc = 0; /* to get around spurious gcc warning, set to zero here */
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	struct inode *newInode = NULL;
-+	char *full_path = NULL;
-+
-+	xid = GetXid();
-+
-+	cFYI(1,
-+	     (" parent inode = 0x%p name is: %s and dentry = 0x%p",
-+	      parent_dir_inode, direntry->d_name.name, direntry));
-+
-+	/* BB Add check of incoming data - e.g. frame not longer than maximum SMB - let server check the namelen BB */
-+
-+	/* check whether path exists */
-+
-+	cifs_sb = CIFS_SB(parent_dir_inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	/* can not grab the rename sem here since it would
-+	deadlock in the cases (beginning of sys_rename itself)
-+	in which we already have the sb rename sem */
-+	full_path = build_path_from_dentry(direntry);
-+	if(full_path == NULL) {
-+		FreeXid(xid);
-+		return ERR_PTR(-ENOMEM);
-+	}
-+
-+	if (direntry->d_inode != NULL) {
-+		cFYI(1, (" non-NULL inode in lookup"));
-+	} else {
-+		cFYI(1, (" NULL inode in lookup"));
-+	}
-+	cFYI(1,
-+	     (" Full path: %s inode = 0x%p", full_path, direntry->d_inode));
-+
-+	if (pTcon->ses->capabilities & CAP_UNIX)
-+		rc = cifs_get_inode_info_unix(&newInode, full_path,
-+					      parent_dir_inode->i_sb,xid);
-+	else
-+		rc = cifs_get_inode_info(&newInode, full_path, NULL,
-+					 parent_dir_inode->i_sb,xid);
-+
-+	if ((rc == 0) && (newInode != NULL)) {
-+		direntry->d_op = &cifs_dentry_ops;
-+		d_add(direntry, newInode);
-+
-+		/* since paths are not looked up by component - the parent directories are presumed to be good here */
-+		renew_parental_timestamps(direntry);
-+
-+	} else if (rc == -ENOENT) {
-+		rc = 0;
-+		d_add(direntry, NULL);
-+	} else {
-+		cERROR(1,("Error 0x%x or on cifs_get_inode_info in lookup",rc));
-+		/* BB special case check for Access Denied - watch security 
-+		exposure of returning dir info implicitly via different rc 
-+		if file exists or not but no access BB */
-+	}
-+
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+	return ERR_PTR(rc);
-+}
-+
-+int
-+cifs_dir_open(struct inode *inode, struct file *file)
-+{				/* NB: currently unused since searches are opened in readdir */
-+	int rc = 0;
-+	int xid;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	char *full_path = NULL;
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	if(file->f_dentry) {
-+		down(&file->f_dentry->d_sb->s_vfs_rename_sem);
-+		full_path = build_wildcard_path_from_dentry(file->f_dentry);
-+		up(&file->f_dentry->d_sb->s_vfs_rename_sem);
-+	} else {
-+		FreeXid(xid);
-+		return -EIO;
-+	}
-+
-+	cFYI(1, ("inode = 0x%p and full path is %s", inode, full_path));
-+
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+static int
-+cifs_d_revalidate(struct dentry *direntry, int flags)
-+{
-+	int isValid = 1;
-+
-+/*	lock_kernel(); *//* surely we do not want to lock the kernel for a whole network round trip which could take seconds */
-+
-+	if (direntry->d_inode) {
-+		if (cifs_revalidate(direntry)) {
-+			/* unlock_kernel(); */
-+			return 0;
-+		}
-+	} else {
-+		cFYI(1,
-+		     ("In cifs_d_revalidate with no inode but name = %s and dentry 0x%p",
-+		      direntry->d_name.name, direntry));
-+	}
-+
-+/*    unlock_kernel(); */
-+
-+	return isValid;
-+}
-+
-+/* static int cifs_d_delete(struct dentry *direntry)
-+{
-+	int rc = 0;
-+
-+	cFYI(1, ("In cifs d_delete, name = %s", direntry->d_name.name));
-+
-+	return rc;
-+}     */
-+
-+struct dentry_operations cifs_dentry_ops = {
-+	.d_revalidate = cifs_d_revalidate,
-+/* d_delete:       cifs_d_delete,       *//* not needed except for debugging */
-+	/* no need for d_hash, d_compare, d_release, d_iput ... yet. BB confirm this BB */
-+};
-diff -urN linux-2.4.29.old/fs/cifs/file.c linux-2.4.29/fs/cifs/file.c
---- linux-2.4.29.old/fs/cifs/file.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/file.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,2185 @@
-+/*
-+ *   fs/cifs/file.c
-+ *
-+ *   vfs operations that deal with files
-+ * 
-+ *   Copyright (C) International Business Machines  Corp., 2002,2003
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/fs.h>
-+#include <linux/stat.h>
-+#include <linux/fcntl.h>
-+#include <linux/version.h>
-+#include <linux/pagemap.h>
-+#include <linux/smp_lock.h>
-+#include <linux/list.h>
-+#include <asm/div64.h>
-+#include <linux/mm.h>
-+#include <linux/types.h>
-+#include "cifsfs.h"
-+#include "cifspdu.h"
-+#include "cifsglob.h"
-+#include "cifsproto.h"
-+#include "cifs_unicode.h"
-+#include "cifs_debug.h"
-+#include "cifs_fs_sb.h"
-+
-+int
-+cifs_open(struct inode *inode, struct file *file)
-+{
-+	int rc = -EACCES;
-+	int xid, oplock;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	struct cifsFileInfo *pCifsFile;
-+	struct cifsInodeInfo *pCifsInode;
-+	char *full_path = NULL;
-+	int desiredAccess = 0x20197;
-+	int disposition;
-+	__u16 netfid;
-+	FILE_ALL_INFO * buf = NULL;
-+	time_t temp;
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	down(&inode->i_sb->s_vfs_rename_sem);
-+	full_path = build_path_from_dentry(file->f_dentry);
-+	up(&inode->i_sb->s_vfs_rename_sem);
-+	if(full_path == NULL) {
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+
-+	cFYI(1, (" inode = 0x%p file flags are 0x%x for %s", inode, file->f_flags,full_path));
-+	if ((file->f_flags & O_ACCMODE) == O_RDONLY)
-+		desiredAccess = GENERIC_READ;
-+	else if ((file->f_flags & O_ACCMODE) == O_WRONLY)
-+		desiredAccess = GENERIC_WRITE;
-+	else if ((file->f_flags & O_ACCMODE) == O_RDWR) {
-+		/* GENERIC_ALL is too much permission to request */
-+		/* can cause unnecessary access denied on create */
-+		/* desiredAccess = GENERIC_ALL; */
-+		desiredAccess = GENERIC_READ | GENERIC_WRITE;
-+	}
-+
-+/*********************************************************************
-+ *  open flag mapping table:
-+ *  
-+ *	POSIX Flag            CIFS Disposition
-+ *	----------            ---------------- 
-+ *	O_CREAT               FILE_OPEN_IF
-+ *	O_CREAT | O_EXCL      FILE_CREATE
-+ *	O_CREAT | O_TRUNC     FILE_OVERWRITE_IF
-+ *	O_TRUNC               FILE_OVERWRITE
-+ *	none of the above     FILE_OPEN
-+ *
-+ *	Note that there is not a direct match between disposition
-+ *	FILE_SUPERSEDE (ie create whether or not file exists although 
-+ *	O_CREAT | O_TRUNC is similar but truncates the existing
-+ *	file rather than creating a new file as FILE_SUPERSEDE does
-+ *	(which uses the attributes / metadata passed in on open call)
-+ *?
-+ *?  O_SYNC is a reasonable match to CIFS writethrough flag  
-+ *?  and the read write flags match reasonably.  O_LARGEFILE
-+ *?  is irrelevant because largefile support is always used
-+ *?  by this client. Flags O_APPEND, O_DIRECT, O_DIRECTORY,
-+ *	 O_FASYNC, O_NOFOLLOW, O_NONBLOCK need further investigation
-+ *********************************************************************/
-+
-+	/* For 2.4 case, file was already checked for existence
-+		before create by vfs lookup and created in create
-+		entry point, we are now just opening the newly 
-+		created file with the right desiredAccess flags */
-+
-+	if((file->f_flags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))
-+		disposition = FILE_OPEN_IF; 
-+	else if((file->f_flags & (O_CREAT | O_TRUNC)) == (O_CREAT | O_TRUNC))
-+		disposition = FILE_OVERWRITE_IF;
-+	else if((file->f_flags & O_CREAT) == O_CREAT)
-+		disposition = FILE_OPEN_IF;
-+	else
-+		disposition = FILE_OPEN;
-+
-+	if (oplockEnabled)
-+		oplock = REQ_OPLOCK;
-+	else
-+		oplock = FALSE;
-+
-+	/* BB pass O_SYNC flag through on file attributes .. BB */
-+
-+	/* Also refresh inode by passing in file_info buf returned by SMBOpen 
-+	   and calling get_inode_info with returned buf (at least 
-+	   helps non-Unix server case */
-+
-+	/* BB we can not do this if this is the second open of a file 
-+	and the first handle has writebehind data, we might be 
-+	able to simply do a filemap_fdatawrite/filemap_fdatawait first */
-+	buf = kmalloc(sizeof(FILE_ALL_INFO),GFP_KERNEL);
-+	if(buf==0) {
-+		if (full_path)
-+			kfree(full_path);
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+	rc = CIFSSMBOpen(xid, pTcon, full_path, disposition, desiredAccess,
-+			CREATE_NOT_DIR, &netfid, &oplock, buf, cifs_sb->local_nls);
-+	if (rc) {
-+		cFYI(1, ("cifs_open returned 0x%x ", rc));
-+		cFYI(1, ("oplock: %d ", oplock));	
-+	} else {
-+		file->private_data =
-+			kmalloc(sizeof (struct cifsFileInfo), GFP_KERNEL);
-+		if (file->private_data) {
-+			memset(file->private_data, 0, sizeof(struct cifsFileInfo));
-+			pCifsFile = (struct cifsFileInfo *) file->private_data;
-+			pCifsFile->netfid = netfid;
-+			pCifsFile->pid = current->pid;
-+			init_MUTEX(&pCifsFile->fh_sem);
-+			pCifsFile->pfile = file; /* needed for writepage */
-+			pCifsFile->pInode = inode;
-+			pCifsFile->invalidHandle = FALSE;
-+			pCifsFile->closePend     = FALSE;
-+			write_lock(&GlobalSMBSeslock);
-+			spin_lock(&files_lock);
-+			list_add(&pCifsFile->tlist,&pTcon->openFileList);
-+			pCifsInode = CIFS_I(file->f_dentry->d_inode);
-+			if(pCifsInode) {
-+				/* want handles we can use to read with first */
-+				/* in the list so we do not have to walk the */
-+				/* list to search for one in prepare_write */
-+				if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
-+					list_add_tail(&pCifsFile->flist,&pCifsInode->openFileList);
-+				} else {
-+					list_add(&pCifsFile->flist,&pCifsInode->openFileList);
-+				}
-+				spin_unlock(&files_lock);
-+				write_unlock(&GlobalSMBSeslock);
-+				if(pCifsInode->clientCanCacheRead) {
-+					/* we have the inode open somewhere else
-+					   no need to discard cache data */
-+				} else {
-+					if(buf) {
-+					/* BB need same check in cifs_create too? */
-+
-+					/* if not oplocked, invalidate inode pages if mtime 
-+					   or file size changed */
-+						temp = cifs_NTtimeToUnix(le64_to_cpu(buf->LastWriteTime));
-+						if((file->f_dentry->d_inode->i_mtime == temp) && 
-+							(file->f_dentry->d_inode->i_size == (loff_t)le64_to_cpu(buf->EndOfFile))) {
-+							cFYI(1,("inode unchanged on server"));
-+						} else {
-+							if(file->f_dentry->d_inode->i_mapping) {
-+							/* BB no need to lock inode until after invalidate*/
-+							/* since namei code should already have it locked?*/
-+								filemap_fdatasync(file->f_dentry->d_inode->i_mapping);
-+							}
-+							cFYI(1,("invalidating remote inode since open detected it changed"));
-+							invalidate_inode_pages(file->f_dentry->d_inode);
-+						}
-+					}
-+				}
-+				if (pTcon->ses->capabilities & CAP_UNIX)
-+					rc = cifs_get_inode_info_unix(&file->f_dentry->d_inode,
-+						full_path, inode->i_sb,xid);
-+				else
-+					rc = cifs_get_inode_info(&file->f_dentry->d_inode,
-+						full_path, buf, inode->i_sb,xid);
-+
-+				if((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
-+					pCifsInode->clientCanCacheAll = TRUE;
-+					pCifsInode->clientCanCacheRead = TRUE;
-+					cFYI(1,("Exclusive Oplock granted on inode %p",file->f_dentry->d_inode));
-+				} else if((oplock & 0xF) == OPLOCK_READ)
-+					pCifsInode->clientCanCacheRead = TRUE;
-+			} else {
-+				spin_unlock(&files_lock);
-+				write_unlock(&GlobalSMBSeslock);
-+			}
-+			if(oplock & CIFS_CREATE_ACTION) {           
-+				/* time to set mode which we can not set earlier due
-+				 to problems creating new read-only files */
-+				if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)                
-+					CIFSSMBUnixSetPerms(xid, pTcon, full_path, inode->i_mode,
-+						(__u64)-1, 
-+						(__u64)-1,
-+						0 /* dev */,
-+						cifs_sb->local_nls);
-+				else {/* BB implement via Windows security descriptors */
-+			/* eg CIFSSMBWinSetPerms(xid,pTcon,full_path,mode,-1,-1,local_nls);*/
-+			/* in the meantime could set r/o dos attribute when perms are eg:
-+					mode & 0222 == 0 */
-+				}
-+			}
-+		}
-+	}
-+
-+	if (buf)
-+		kfree(buf);
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+/* Try to reaquire byte range locks that were released when session */
-+/* to server was lost */
-+static int cifs_relock_file(struct cifsFileInfo * cifsFile)
-+{
-+	int rc = 0;
-+
-+/* BB list all locks open on this file and relock */
-+
-+	return rc;
-+}
-+
-+static int cifs_reopen_file(struct inode *inode, struct file *file, int can_flush)
-+{
-+	int rc = -EACCES;
-+	int xid, oplock;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	struct cifsFileInfo *pCifsFile;
-+	struct cifsInodeInfo *pCifsInode;
-+	char *full_path = NULL;
-+	int desiredAccess = 0x20197;
-+	int disposition = FILE_OPEN;
-+	__u16 netfid;
-+
-+	if(inode == NULL)
-+		return -EBADF;
-+	if (file->private_data) {
-+		pCifsFile = (struct cifsFileInfo *) file->private_data;
-+	} else
-+		return -EBADF;
-+
-+	xid = GetXid();
-+	down(&pCifsFile->fh_sem);
-+	if(pCifsFile->invalidHandle == FALSE) {
-+		up(&pCifsFile->fh_sem);
-+		FreeXid(xid);
-+		return 0;
-+	}
-+
-+	if(file->f_dentry == NULL) {
-+		up(&pCifsFile->fh_sem);
-+		cFYI(1,("failed file reopen, no valid name if dentry freed"));
-+		FreeXid(xid);
-+		return -EBADF;
-+	}
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+/* can not grab rename sem here because various ops, including
-+those that already have the rename sem can end up causing writepage
-+to get called and if the server was down that means we end up here,
-+and we can never tell if the caller already has the rename_sem */
-+	full_path = build_path_from_dentry(file->f_dentry);
-+	if(full_path == NULL) {
-+		up(&pCifsFile->fh_sem);
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+
-+	cFYI(1, (" inode = 0x%p file flags are 0x%x for %s", inode, file->f_flags,full_path));
-+	if ((file->f_flags & O_ACCMODE) == O_RDONLY)
-+		desiredAccess = GENERIC_READ;
-+	else if ((file->f_flags & O_ACCMODE) == O_WRONLY)
-+		desiredAccess = GENERIC_WRITE;
-+	else if ((file->f_flags & O_ACCMODE) == O_RDWR) {
-+		/* GENERIC_ALL is too much permission to request */
-+		/* can cause unnecessary access denied on create */
-+		/* desiredAccess = GENERIC_ALL; */
-+		desiredAccess = GENERIC_READ | GENERIC_WRITE;
-+	}
-+
-+	if (oplockEnabled)
-+		oplock = REQ_OPLOCK;
-+	else
-+		oplock = FALSE;
-+
-+	
-+	/* Can not refresh inode by passing in file_info buf to be returned
-+	 by SMBOpen and then calling get_inode_info with returned buf 
-+	 since file might have write behind data that needs to be flushed 
-+	 and server version of file size can be stale. If we 
-+	 knew for sure that inode was not dirty locally we could do this */
-+
-+/*	buf = kmalloc(sizeof(FILE_ALL_INFO),GFP_KERNEL);
-+	if(buf==0) {
-+		up(&pCifsFile->fh_sem);
-+		if (full_path)
-+			kfree(full_path);
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}*/
-+	rc = CIFSSMBOpen(xid, pTcon, full_path, disposition, desiredAccess,
-+				CREATE_NOT_DIR, &netfid, &oplock, NULL, cifs_sb->local_nls);
-+	if (rc) {
-+		up(&pCifsFile->fh_sem);
-+		cFYI(1, ("cifs_open returned 0x%x ", rc));
-+		cFYI(1, ("oplock: %d ", oplock));
-+	} else {
-+		pCifsFile->netfid = netfid;
-+		pCifsFile->invalidHandle = FALSE;
-+		up(&pCifsFile->fh_sem);
-+		pCifsInode = CIFS_I(inode);
-+		if(pCifsInode) {
-+			if(can_flush) {
-+				filemap_fdatasync(inode->i_mapping);
-+				filemap_fdatawait(inode->i_mapping);
-+			/* temporarily disable caching while we
-+			go to server to get inode info */
-+				pCifsInode->clientCanCacheAll = FALSE;
-+				pCifsInode->clientCanCacheRead = FALSE;
-+				if (pTcon->ses->capabilities & CAP_UNIX)
-+					rc = cifs_get_inode_info_unix(&inode,
-+						full_path, inode->i_sb,xid);
-+				else
-+					rc = cifs_get_inode_info(&inode,
-+						full_path, NULL, inode->i_sb,xid);
-+			} /* else we are writing out data to server already
-+			and could deadlock if we tried to flush data, and 
-+			since we do not know if we have data that would
-+			invalidate the current end of file on the server
-+			we can not go to the server to get the new
-+			inod info */
-+			if((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
-+				pCifsInode->clientCanCacheAll =  TRUE;
-+				pCifsInode->clientCanCacheRead = TRUE;
-+				cFYI(1,("Exclusive Oplock granted on inode %p",file->f_dentry->d_inode));
-+			} else if((oplock & 0xF) == OPLOCK_READ) {
-+				pCifsInode->clientCanCacheRead = TRUE;
-+				pCifsInode->clientCanCacheAll =  FALSE;
-+			} else {
-+				pCifsInode->clientCanCacheRead = FALSE;
-+				pCifsInode->clientCanCacheAll =  FALSE;
-+			}
-+			cifs_relock_file(pCifsFile);
-+		}
-+	}
-+
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int
-+cifs_close(struct inode *inode, struct file *file)
-+{
-+	int rc = 0;
-+	int xid;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	struct cifsFileInfo *pSMBFile =
-+		(struct cifsFileInfo *) file->private_data;
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+	if (pSMBFile) {
-+		pSMBFile->closePend    = TRUE;
-+		spin_lock(&files_lock);
-+		if(pTcon) {
-+			/* no sense reconnecting to close a file that is
-+				already closed */
-+			if (pTcon->tidStatus != CifsNeedReconnect) {
-+				spin_unlock(&files_lock);
-+				rc = CIFSSMBClose(xid,pTcon,pSMBFile->netfid);
-+				spin_lock(&files_lock);
-+			}
-+		}
-+		list_del(&pSMBFile->flist);
-+		list_del(&pSMBFile->tlist);
-+		spin_unlock(&files_lock);
-+		if(pSMBFile->search_resume_name)
-+			kfree(pSMBFile->search_resume_name);
-+		kfree(file->private_data);
-+		file->private_data = NULL;
-+	} else
-+		rc = -EBADF;
-+
-+	if(list_empty(&(CIFS_I(inode)->openFileList))) {
-+		cFYI(1,("closing last open instance for inode %p",inode));
-+		/* if the file is not open we do not know if we can cache
-+		info on this inode, much less write behind and read ahead */
-+		CIFS_I(inode)->clientCanCacheRead = FALSE;
-+		CIFS_I(inode)->clientCanCacheAll  = FALSE;
-+	}
-+	if((rc ==0) && CIFS_I(inode)->write_behind_rc)
-+		rc = CIFS_I(inode)->write_behind_rc;
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int
-+cifs_closedir(struct inode *inode, struct file *file)
-+{
-+	int rc = 0;
-+	int xid;
-+	struct cifsFileInfo *pSMBFileStruct =
-+	    (struct cifsFileInfo *) file->private_data;
-+
-+	cFYI(1, ("Closedir inode = 0x%p with ", inode));
-+
-+	xid = GetXid();
-+
-+	if (pSMBFileStruct) {
-+		cFYI(1, ("Freeing private data in close dir"));
-+		kfree(file->private_data);
-+		file->private_data = NULL;
-+	}
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int
-+cifs_lock(struct file *file, int cmd, struct file_lock *pfLock)
-+{
-+	int rc, xid;
-+	__u32 lockType = LOCKING_ANDX_LARGE_FILES;
-+	__u32 numLock = 0;
-+	__u32 numUnlock = 0;
-+	__u64 length;
-+	int wait_flag = FALSE;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	length = 1 + pfLock->fl_end - pfLock->fl_start;
-+
-+	rc = -EACCES;
-+
-+	xid = GetXid();
-+
-+	cFYI(1,
-+	     ("Lock parm: 0x%x flockflags: 0x%x flocktype: 0x%x start: %lld end: %lld",
-+	      cmd, pfLock->fl_flags, pfLock->fl_type, pfLock->fl_start,
-+	      pfLock->fl_end));
-+
-+	if (pfLock->fl_flags & FL_POSIX)
-+		cFYI(1, ("Posix "));
-+	if (pfLock->fl_flags & FL_FLOCK)
-+		cFYI(1, ("Flock "));
-+/*	if (pfLock->fl_flags & FL_SLEEP) {
-+		cFYI(1, ("Blocking lock "));
-+		wait_flag = TRUE;
-+	} */                          
-+	if (pfLock->fl_flags & FL_ACCESS)
-+		cFYI(1, ("Process suspended by mandatory locking - not implemented yet "));
-+	if (pfLock->fl_flags & FL_LEASE)
-+		cFYI(1, ("Lease on file - not implemented yet"));
-+	if (pfLock->fl_flags & (~(FL_POSIX | FL_FLOCK | FL_ACCESS | FL_LEASE)))
-+		cFYI(1, ("Unknown lock flags 0x%x",pfLock->fl_flags));
-+
-+	if (pfLock->fl_type == F_WRLCK) {
-+		cFYI(1, ("F_WRLCK "));
-+		numLock = 1;
-+	} else if (pfLock->fl_type == F_UNLCK) {
-+		cFYI(1, ("F_UNLCK "));
-+		numUnlock = 1;
-+	} else if (pfLock->fl_type == F_RDLCK) {
-+		cFYI(1, ("F_RDLCK "));
-+		lockType |= LOCKING_ANDX_SHARED_LOCK;
-+		numLock = 1;
-+	} else if (pfLock->fl_type == F_EXLCK) {
-+		cFYI(1, ("F_EXLCK "));
-+		numLock = 1;
-+	} else if (pfLock->fl_type == F_SHLCK) {
-+		cFYI(1, ("F_SHLCK "));
-+		lockType |= LOCKING_ANDX_SHARED_LOCK;
-+		numLock = 1;
-+	} else
-+		cFYI(1, ("Unknown type of lock "));
-+
-+	cifs_sb = CIFS_SB(file->f_dentry->d_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	if (file->private_data == NULL) {
-+		FreeXid(xid);
-+		return -EBADF;
-+	}
-+
-+	if (IS_GETLK(cmd)) {
-+		rc = CIFSSMBLock(xid, pTcon,
-+				 ((struct cifsFileInfo *) file->
-+				  private_data)->netfid,
-+				 length,
-+				 pfLock->fl_start, 0, 1, lockType,
-+				 0 /* wait flag */ );
-+		if (rc == 0) {
-+			rc = CIFSSMBLock(xid, pTcon,
-+					 ((struct cifsFileInfo *) file->
-+					  private_data)->netfid,
-+					 length,
-+					 pfLock->fl_start, 1 /* numUnlock */ ,
-+					 0 /* numLock */ , lockType,
-+					 0 /* wait flag */ );
-+			pfLock->fl_type = F_UNLCK;
-+			if (rc != 0)
-+				cERROR(1,
-+					("Error unlocking previously locked range %d during test of lock ",
-+					rc));
-+			rc = 0;
-+
-+		} else {
-+			/* if rc == ERR_SHARING_VIOLATION ? */
-+			rc = 0;	/* do not change lock type to unlock since range in use */
-+		}
-+
-+		FreeXid(xid);
-+		return rc;
-+	}
-+
-+	rc = CIFSSMBLock(xid, pTcon,
-+			 ((struct cifsFileInfo *) file->private_data)->
-+			 netfid, length,
-+			 pfLock->fl_start, numUnlock, numLock, lockType,
-+			 wait_flag);
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+ssize_t
-+cifs_write(struct file * file, const char *write_data,
-+	   size_t write_size, loff_t * poffset)
-+{
-+	int rc = 0;
-+	unsigned int bytes_written = 0;
-+	unsigned int total_written;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	int xid, long_op;
-+	struct cifsFileInfo * open_file;
-+
-+	if(file->f_dentry == NULL)
-+		return -EBADF;
-+
-+	cifs_sb = CIFS_SB(file->f_dentry->d_sb);
-+	if(cifs_sb == NULL) {
-+		return -EBADF;
-+	}
-+	pTcon = cifs_sb->tcon;
-+
-+	/*cFYI(1,
-+	   (" write %d bytes to offset %lld of %s", write_size,
-+	   *poffset, file->f_dentry->d_name.name)); */
-+
-+	if (file->private_data == NULL) {
-+		return -EBADF;
-+	} else {
-+		open_file = (struct cifsFileInfo *) file->private_data;
-+	}
-+	
-+	xid = GetXid();
-+	if(file->f_dentry->d_inode == NULL) {
-+		FreeXid(xid);
-+		return -EBADF;
-+	}
-+
-+	if (*poffset > file->f_dentry->d_inode->i_size)
-+		long_op = 2;  /* writes past end of file can take a long time */
-+	else
-+		long_op = 1;
-+
-+	for (total_written = 0; write_size > total_written;
-+	     total_written += bytes_written) {
-+		rc = -EAGAIN;
-+		while(rc == -EAGAIN) {
-+			if(file->private_data == NULL) {
-+				/* file has been closed on us */
-+				FreeXid(xid);
-+			/* if we have gotten here we have written some data
-+			and blocked, and the file has been freed on us
-+			while we blocked so return what we managed to write */
-+				return total_written;
-+			} 
-+			if(open_file->closePend) {
-+				FreeXid(xid);
-+				if(total_written)
-+					return total_written;
-+				else
-+					return -EBADF;
-+			}
-+			if (open_file->invalidHandle) {
-+				if((file->f_dentry == NULL) ||
-+				   (file->f_dentry->d_inode == NULL)) {
-+					FreeXid(xid);
-+					return total_written;
-+				}
-+				/* we could deadlock if we called
-+				 filemap_fdatawait from here so tell
-+				reopen_file not to flush data to server now */
-+				rc = cifs_reopen_file(file->f_dentry->d_inode,
-+					file,FALSE);
-+				if(rc != 0)
-+					break;
-+			}
-+
-+			rc = CIFSSMBWrite(xid, pTcon,
-+				   open_file->netfid,
-+				  write_size - total_written, *poffset,
-+				  &bytes_written,
-+				  write_data + total_written, long_op);
-+		}
-+		if (rc || (bytes_written == 0)) {
-+			if (total_written)
-+				break;
-+			else {
-+				FreeXid(xid);
-+				return rc;
-+			}
-+		} else
-+			*poffset += bytes_written;
-+		long_op = FALSE; /* subsequent writes fast - 15 seconds is plenty */
-+	}
-+
-+#ifdef CONFIG_CIFS_STATS
-+	if(total_written > 0) {
-+		atomic_inc(&pTcon->num_writes);
-+		spin_lock(&pTcon->stat_lock);
-+		pTcon->bytes_written += total_written;
-+		spin_unlock(&pTcon->stat_lock);
-+	}
-+#endif		
-+
-+	/* since the write may have blocked check these pointers again */
-+	if(file->f_dentry) {
-+		if(file->f_dentry->d_inode) {
-+			file->f_dentry->d_inode->i_ctime = file->f_dentry->d_inode->i_mtime =
-+				CURRENT_TIME;
-+			if (total_written > 0) {
-+				if (*poffset > file->f_dentry->d_inode->i_size)
-+					file->f_dentry->d_inode->i_size = *poffset;
-+			}
-+			mark_inode_dirty_sync(file->f_dentry->d_inode);
-+		}
-+	}
-+	FreeXid(xid);
-+	return total_written;
-+}
-+
-+static int
-+cifs_partialpagewrite(struct page *page,unsigned from, unsigned to)
-+{
-+	struct address_space *mapping = page->mapping;
-+	loff_t offset = (loff_t)page->index << PAGE_CACHE_SHIFT;
-+	char * write_data;
-+	int rc = -EFAULT;
-+	int bytes_written = 0;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	struct inode *inode;
-+	struct cifsInodeInfo *cifsInode;
-+	struct cifsFileInfo *open_file = NULL;
-+	struct list_head *tmp;
-+	struct list_head *tmp1;
-+
-+	if (!mapping) {
-+		return -EFAULT;
-+	} else if(!mapping->host) {
-+		return -EFAULT;
-+	}
-+
-+	inode = page->mapping->host;
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	offset += (loff_t)from;
-+	write_data = kmap(page);
-+	write_data += from;
-+
-+	if((to > PAGE_CACHE_SIZE) || (from > to)) {
-+		kunmap(page);
-+		return -EIO;
-+	}
-+
-+	/* racing with truncate? */
-+	if(offset > mapping->host->i_size) {
-+		kunmap(page);
-+		return 0; /* don't care */
-+	}
-+
-+	/* check to make sure that we are not extending the file */
-+	if(mapping->host->i_size - offset < (loff_t)to)
-+		to = (unsigned)(mapping->host->i_size - offset); 
-+		
-+
-+	cifsInode = CIFS_I(mapping->host);
-+	read_lock(&GlobalSMBSeslock); 
-+	/* BB we should start at the end */
-+	list_for_each_safe(tmp, tmp1, &cifsInode->openFileList) {            
-+		open_file = list_entry(tmp,struct cifsFileInfo, flist);
-+		if(open_file->closePend)
-+			continue;
-+		/* We check if file is open for writing first */
-+		if((open_file->pfile) && 
-+		   ((open_file->pfile->f_flags & O_RDWR) || 
-+			(open_file->pfile->f_flags & O_WRONLY))) {
-+			read_unlock(&GlobalSMBSeslock);
-+			bytes_written = cifs_write(open_file->pfile, write_data,
-+					to-from, &offset);
-+			read_lock(&GlobalSMBSeslock);
-+		/* Does mm or vfs already set times? */
-+			inode->i_atime = inode->i_mtime = CURRENT_TIME;
-+			if ((bytes_written > 0) && (offset)) {
-+				rc = 0;
-+			} else if(bytes_written < 0) {
-+				if(rc == -EBADF) {
-+				/* have seen a case in which
-+				kernel seemed to have closed/freed a file
-+				even with writes active so we might as well
-+				see if there are other file structs to try
-+				for the same inode before giving up */
-+					continue;
-+				} else
-+					rc = bytes_written;
-+			}
-+			break;  /* now that we found a valid file handle
-+				and tried to write to it we are done, no
-+				sense continuing to loop looking for another */
-+		}
-+		if(tmp->next == NULL) {
-+			cFYI(1,("File instance %p removed",tmp));
-+			break;
-+		}
-+	}
-+	read_unlock(&GlobalSMBSeslock);
-+	if(open_file == NULL) {
-+		cFYI(1,("No writeable filehandles for inode"));
-+		rc = -EIO;
-+	}
-+
-+	kunmap(page);
-+	return rc;
-+}
-+
-+#if 0
-+static int
-+cifs_writepages(struct address_space *mapping, struct writeback_control *wbc)
-+{
-+	int rc = -EFAULT;
-+	int xid;
-+
-+	xid = GetXid();
-+/* call 16K write then Setpageuptodate */
-+	FreeXid(xid);
-+	return rc;
-+}
-+#endif
-+
-+static int
-+cifs_writepage(struct page* page)
-+{
-+	int rc = -EFAULT;
-+	int xid;
-+
-+	xid = GetXid();
-+/* BB add check for wbc flags */
-+	page_cache_get(page);
-+        if (!Page_Uptodate(page)) {
-+		cFYI(1,("ppw - page not up to date"));
-+	}
-+	
-+	rc = cifs_partialpagewrite(page,0,PAGE_CACHE_SIZE);
-+	SetPageUptodate(page); /* BB add check for error and Clearuptodate? */
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20))
-+	unlock_page(page);
-+#else
-+	UnlockPage(page);
-+#endif
-+	page_cache_release(page);	
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+static int
-+cifs_commit_write(struct file *file, struct page *page, unsigned offset,
-+		  unsigned to)
-+{
-+	int xid;
-+	int rc = 0;
-+	struct inode *inode = page->mapping->host;
-+	loff_t position = ((loff_t)page->index << PAGE_CACHE_SHIFT) + to;
-+	char * page_data;
-+
-+	xid = GetXid();
-+	cFYI(1,("commit write for page %p up to position %lld for %d",page,position,to));
-+	if (position > inode->i_size){
-+		inode->i_size = position;
-+		/*if (file->private_data == NULL) {
-+			rc = -EBADF;
-+		} else {
-+			open_file = (struct cifsFileInfo *)file->private_data;
-+			cifs_sb = CIFS_SB(inode->i_sb);
-+			rc = -EAGAIN;
-+			while(rc == -EAGAIN) {
-+				if((open_file->invalidHandle) && 
-+				  (!open_file->closePend)) {
-+					rc = cifs_reopen_file(file->f_dentry->d_inode,file);
-+					if(rc != 0)
-+						break;
-+				}
-+				if(!open_file->closePend) {
-+					rc = CIFSSMBSetFileSize(xid, cifs_sb->tcon, 
-+						position, open_file->netfid,
-+						open_file->pid,FALSE);
-+				} else {
-+					rc = -EBADF;
-+					break;
-+				}
-+			}
-+			cFYI(1,(" SetEOF (commit write) rc = %d",rc));
-+		}*/
-+	}
-+	if (!Page_Uptodate(page)) {
-+		position =  ((loff_t)page->index << PAGE_CACHE_SHIFT) + offset;
-+		/* can not rely on (or let) writepage write this data */
-+		if(to < offset) {
-+			cFYI(1,("Illegal offsets, can not copy from %d to %d",
-+				offset,to));
-+			FreeXid(xid);
-+			return rc;
-+		}
-+		/* this is probably better than directly calling 
-+		partialpage_write since in this function
-+		the file handle is known which we might as well
-+		leverage */
-+		/* BB check if anything else missing out of ppw */
-+		/* such as updating last write time */
-+		page_data = kmap(page);
-+		rc = cifs_write(file, page_data+offset,to-offset,
-+                                        &position);
-+		if(rc > 0)
-+			rc = 0;
-+		/* else if rc < 0 should we set writebehind rc? */
-+		kunmap(page);
-+	} else {	
-+		set_page_dirty(page);
-+	}
-+
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int
-+cifs_fsync(struct file *file, struct dentry *dentry, int datasync)
-+{
-+	int xid;
-+	int rc = 0;
-+	struct inode * inode = file->f_dentry->d_inode;
-+
-+	xid = GetXid();
-+
-+	cFYI(1, ("Sync file - name: %s datasync: 0x%x ", 
-+		dentry->d_name.name, datasync));
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,17))	
-+	rc = filemap_fdatasync(inode->i_mapping);
-+#else
-+	filemap_fdatasync(inode->i_mapping);
-+#endif
-+	if(rc == 0)
-+		CIFS_I(inode)->write_behind_rc = 0;
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+static int
-+cifs_sync_page(struct page *page)
-+{
-+	struct address_space *mapping;
-+	struct inode *inode;
-+	unsigned long index = page->index;
-+	unsigned int rpages = 0;
-+	int rc = 0;
-+
-+	cFYI(1,("sync page %p",page));
-+	mapping = page->mapping;
-+	if (!mapping)
-+		return 0;
-+	inode = mapping->host;
-+	if (!inode)
-+		return 0;
-+
-+/*	fill in rpages then 
-+    result = cifs_pagein_inode(inode, index, rpages); *//* BB finish */
-+
-+	cFYI(1, ("rpages is %d for sync page of Index %ld ", rpages, index));
-+
-+	if (rc < 0)
-+		return rc;
-+	return 0;
-+}
-+
-+/*
-+ * As file closes, flush all cached write data for this inode checking
-+ * for write behind errors.
-+ *
-+ */
-+int cifs_flush(struct file *file)
-+{
-+	struct inode * inode = file->f_dentry->d_inode;
-+	int rc = 0;
-+
-+	/* Rather than do the steps manually: */
-+	/* lock the inode for writing */
-+	/* loop through pages looking for write behind data (dirty pages) */
-+	/* coalesce into contiguous 16K (or smaller) chunks to write to server */
-+	/* send to server (prefer in parallel) */
-+	/* deal with writebehind errors */
-+	/* unlock inode for writing */
-+	/* filemapfdatawrite appears easier for the time being */
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,17))
-+	rc = filemap_fdatasync(inode->i_mapping);
-+#else
-+	filemap_fdatasync(inode->i_mapping);
-+#endif
-+	if(rc == 0) /* reset wb rc if we were able to write out dirty pages */
-+		CIFS_I(inode)->write_behind_rc = 0;
-+		
-+	cFYI(1,("Flush inode %p file %p rc %d",inode,file,rc));
-+
-+	return rc;
-+}
-+
-+
-+ssize_t
-+cifs_read(struct file * file, char *read_data, size_t read_size,
-+	  loff_t * poffset)
-+{
-+	int rc = -EACCES;
-+	unsigned int bytes_read = 0;
-+	unsigned int total_read;
-+	unsigned int current_read_size;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	int xid;
-+	char * current_offset;
-+	struct cifsFileInfo * open_file;
-+
-+	xid = GetXid();
-+	cifs_sb = CIFS_SB(file->f_dentry->d_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	if (file->private_data == NULL) {
-+		FreeXid(xid);
-+		return -EBADF;
-+	}
-+	open_file = (struct cifsFileInfo *)file->private_data;
-+
-+	if((file->f_flags & O_ACCMODE) == O_WRONLY) {
-+		cFYI(1,("attempting read on write only file instance"));
-+	}
-+
-+	for (total_read = 0,current_offset=read_data; read_size > total_read;
-+				total_read += bytes_read,current_offset+=bytes_read) {
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,15))
-+		current_read_size = min_t(const int,read_size - total_read,cifs_sb->rsize);
-+#else
-+                current_read_size = min(read_size - total_read,cifs_sb->rsize);
-+#endif
-+		rc = -EAGAIN;
-+		while(rc == -EAGAIN) {
-+			if ((open_file->invalidHandle) && (!open_file->closePend)) {
-+				rc = cifs_reopen_file(file->f_dentry->d_inode,
-+					file,TRUE);
-+				if(rc != 0)
-+					break;
-+			}
-+
-+			rc = CIFSSMBRead(xid, pTcon,
-+				 open_file->netfid,
-+				 current_read_size, *poffset,
-+				 &bytes_read, &current_offset);
-+		}
-+		if (rc || (bytes_read == 0)) {
-+			if (total_read) {
-+				break;
-+			} else {
-+				FreeXid(xid);
-+				return rc;
-+			}
-+		} else {
-+#ifdef CONFIG_CIFS_STATS
-+			atomic_inc(&pTcon->num_reads);
-+			spin_lock(&pTcon->stat_lock);
-+			pTcon->bytes_read += total_read;
-+			spin_unlock(&pTcon->stat_lock);
-+#endif
-+			*poffset += bytes_read;
-+		}
-+	}
-+	FreeXid(xid);
-+	return total_read;
-+}
-+
-+int cifs_file_mmap(struct file * file, struct vm_area_struct * vma)
-+{
-+	struct dentry * dentry = file->f_dentry;
-+	int	rc, xid;
-+
-+	xid = GetXid();
-+	rc = cifs_revalidate(dentry);
-+	if (rc) {
-+		cFYI(1,("Validation prior to mmap failed, error=%d", rc));
-+		FreeXid(xid);
-+		return rc;
-+	}
-+	rc = generic_file_mmap(file, vma);
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-+static void cifs_copy_cache_pages(struct address_space *mapping, 
-+		struct list_head *pages, int bytes_read, 
-+		char *data,struct pagevec * plru_pvec)
-+{
-+	struct page *page;
-+	char * target;
-+
-+	while (bytes_read > 0) {
-+		if(list_empty(pages))
-+			break;
-+
-+		page = list_entry(pages->prev, struct page, lru);
-+		list_del(&page->lru);
-+
-+		if (add_to_page_cache(page, mapping, page->index, GFP_KERNEL)) {
-+			page_cache_release(page);
-+			cFYI(1,("Add page cache failed"));
-+			continue;
-+		}
-+
-+		target = kmap_atomic(page,KM_USER0);
-+
-+		if(PAGE_CACHE_SIZE > bytes_read) {
-+			memcpy(target,data,bytes_read);
-+			/* zero the tail end of this partial page */
-+			memset(target+bytes_read,0,PAGE_CACHE_SIZE-bytes_read);
-+			bytes_read = 0;
-+		} else {
-+			memcpy(target,data,PAGE_CACHE_SIZE);
-+			bytes_read -= PAGE_CACHE_SIZE;
-+		}
-+		kunmap_atomic(target,KM_USER0);
-+
-+		flush_dcache_page(page);
-+		SetPageUptodate(page);
-+		unlock_page(page);
-+		if (!pagevec_add(plru_pvec, page))
-+			__pagevec_lru_add(plru_pvec);
-+		data += PAGE_CACHE_SIZE;
-+	}
-+	return;
-+}
-+
-+
-+static int
-+cifs_readpages(struct file *file, struct address_space *mapping,
-+		struct list_head *page_list, unsigned num_pages)
-+{
-+	int rc = -EACCES;
-+	int xid;
-+	loff_t offset;
-+	struct page * page;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	int bytes_read = 0;
-+	unsigned int read_size,i;
-+	char * smb_read_data = NULL;
-+	struct smb_com_read_rsp * pSMBr;
-+	struct pagevec lru_pvec;
-+	struct cifsFileInfo * open_file;
-+
-+	xid = GetXid();
-+	if (file->private_data == NULL) {
-+		FreeXid(xid);
-+		return -EBADF;
-+	}
-+	open_file = (struct cifsFileInfo *)file->private_data;
-+	cifs_sb = CIFS_SB(file->f_dentry->d_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	pagevec_init(&lru_pvec, 0);
-+
-+	for(i = 0;i<num_pages;) {
-+		unsigned contig_pages;
-+		struct page * tmp_page;
-+		unsigned long expected_index;
-+
-+		if(list_empty(page_list)) {
-+			break;
-+		}
-+		page = list_entry(page_list->prev, struct page, lru);
-+		offset = (loff_t)page->index << PAGE_CACHE_SHIFT;
-+
-+		/* count adjacent pages that we will read into */
-+		contig_pages = 0;
-+		expected_index = list_entry(page_list->prev,struct page,lru)->index;
-+		list_for_each_entry_reverse(tmp_page,page_list,lru) {
-+			if(tmp_page->index == expected_index) {
-+				contig_pages++;
-+				expected_index++;
-+			} else {
-+				break; 
-+			}
-+		}
-+		if(contig_pages + i >  num_pages) {
-+			contig_pages = num_pages - i;
-+		}
-+
-+		/* for reads over a certain size could initiate async read ahead */
-+
-+		read_size = contig_pages * PAGE_CACHE_SIZE;
-+		/* Read size needs to be in multiples of one page */
-+		read_size = min_t(const unsigned int,read_size,cifs_sb->rsize & PAGE_CACHE_MASK);
-+
-+		rc = -EAGAIN;
-+		while(rc == -EAGAIN) {
-+			if ((open_file->invalidHandle) && (!open_file->closePend)) {
-+				rc = cifs_reopen_file(file->f_dentry->d_inode,
-+					file, TRUE);
-+				if(rc != 0)
-+					break;
-+			}
-+
-+			rc = CIFSSMBRead(xid, pTcon,
-+				open_file->netfid,
-+				read_size, offset,
-+				&bytes_read, &smb_read_data);
-+			/* BB need to check return code here */
-+			if(rc== -EAGAIN) {
-+				if(smb_read_data) {
-+					cifs_buf_release(smb_read_data);
-+					smb_read_data = NULL;
-+				}
-+			}
-+		}
-+		if ((rc < 0) || (smb_read_data == NULL)) {
-+			cFYI(1,("Read error in readpages: %d",rc));
-+			/* clean up remaing pages off list */
-+			while (!list_empty(page_list) && (i < num_pages)) {
-+				page = list_entry(page_list->prev, struct page, lru);
-+				list_del(&page->lru);
-+				page_cache_release(page);
-+			}
-+			break;
-+		} else if (bytes_read > 0) {
-+			pSMBr = (struct smb_com_read_rsp *)smb_read_data;
-+			cifs_copy_cache_pages(mapping, page_list, bytes_read,
-+				smb_read_data + 4 /* RFC1001 hdr */ +
-+				le16_to_cpu(pSMBr->DataOffset), &lru_pvec);
-+
-+			i +=  bytes_read >> PAGE_CACHE_SHIFT;
-+#ifdef CONFIG_CIFS_STATS
-+			atomic_inc(&pTcon->num_reads);
-+			spin_lock(&pTcon->stat_lock);
-+			pTcon->bytes_read += bytes_read;
-+			spin_unlock(&pTcon->stat_lock);
-+#endif
-+			if((int)(bytes_read & PAGE_CACHE_MASK) != bytes_read) {
-+				cFYI(1,("Partial page %d of %d read to cache",i++,num_pages));
-+
-+				i++; /* account for partial page */
-+
-+				/* server copy of file can have smaller size than client */
-+				/* BB do we need to verify this common case ? this case is ok - 
-+				if we are at server EOF we will hit it on next read */
-+
-+			/* while(!list_empty(page_list) && (i < num_pages)) {
-+					page = list_entry(page_list->prev,struct page, list);
-+					list_del(&page->list);
-+					page_cache_release(page);
-+				}
-+				break; */
-+			}
-+		} else {
-+			cFYI(1,("No bytes read (%d) at offset %lld . Cleaning remaining pages from readahead list",bytes_read,offset)); 
-+			/* BB turn off caching and do new lookup on file size at server? */
-+			while (!list_empty(page_list) && (i < num_pages)) {
-+				page = list_entry(page_list->prev, struct page, lru);
-+				list_del(&page->lru);
-+				page_cache_release(page); /* BB removeme - replace with zero of page? */
-+			}
-+			break;
-+		}
-+		if(smb_read_data) {
-+			cifs_buf_release(smb_read_data);
-+			smb_read_data = NULL;
-+		}
-+		bytes_read = 0;
-+	}
-+
-+	pagevec_lru_add(&lru_pvec);
-+
-+/* need to free smb_read_data buf before exit */
-+	if(smb_read_data) {
-+		cifs_buf_release(smb_read_data);
-+		smb_read_data = NULL;
-+	} 
-+
-+	FreeXid(xid);
-+	return rc;
-+}
-+#endif
-+
-+static int cifs_readpage_worker(struct file *file, struct page *page, loff_t * poffset)
-+{
-+	char * read_data;
-+	int rc;
-+
-+	page_cache_get(page);
-+	read_data = kmap(page);
-+	/* for reads over a certain size could initiate async read ahead */
-+                                                                                                                           
-+	rc = cifs_read(file, read_data, PAGE_CACHE_SIZE, poffset);
-+                                                                                                                           
-+	if (rc < 0)
-+		goto io_error;
-+	else {
-+		cFYI(1,("Bytes read %d ",rc));
-+	}
-+                                                                                                                           
-+	file->f_dentry->d_inode->i_atime = CURRENT_TIME;
-+                                                                                                                           
-+	if(PAGE_CACHE_SIZE > rc) {
-+		memset(read_data+rc, 0, PAGE_CACHE_SIZE - rc);
-+	}
-+	flush_dcache_page(page);
-+	SetPageUptodate(page);
-+	rc = 0;
-+                                                                                                                           
-+io_error:
-+        kunmap(page);
-+	page_cache_release(page);
-+	return rc;
-+}
-+
-+static int
-+cifs_readpage(struct file *file, struct page *page)
-+{
-+	loff_t offset = (loff_t)page->index << PAGE_CACHE_SHIFT;
-+	int rc = -EACCES;
-+	int xid;
-+
-+	xid = GetXid();
-+
-+	if (file->private_data == NULL) {
-+		FreeXid(xid);
-+		return -EBADF;
-+	}
-+
-+	cFYI(1,("readpage %p at offset %d 0x%x\n",page,(int)offset,(int)offset));
-+
-+	rc = cifs_readpage_worker(file,page,&offset);
-+
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20))
-+	unlock_page(page);
-+#else
-+	UnlockPage(page);
-+#endif
-+
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+/* We do not want to update the file size from server for inodes
-+   open for write - to avoid races with writepage extending
-+   the file - in the future we could consider allowing
-+   refreshing the inode only on increases in the file size
-+   but this is tricky to do without racing with writebehind
-+   page caching in the current Linux kernel design */
-+
-+int is_size_safe_to_change(struct cifsInodeInfo * cifsInode)
-+{
-+	struct list_head *tmp;
-+	struct list_head *tmp1;
-+	struct cifsFileInfo *open_file = NULL;
-+	int rc = TRUE;
-+
-+	if(cifsInode == NULL)
-+		return rc;
-+
-+	read_lock(&GlobalSMBSeslock);
-+	list_for_each_safe(tmp, tmp1, &cifsInode->openFileList) {
-+		open_file = list_entry(tmp,struct cifsFileInfo, flist);
-+		if(open_file == NULL)
-+			break;
-+		if(open_file->closePend)
-+			continue;
-+	/* We check if file is open for writing,
-+	BB we could supplement this with a check to see if file size
-+	changes have been flushed to server - ie inode metadata dirty */
-+		if((open_file->pfile) &&
-+		   ((open_file->pfile->f_flags & O_RDWR) ||
-+		    (open_file->pfile->f_flags & O_WRONLY))) {
-+			rc = FALSE;
-+			break;
-+		}
-+		if(tmp->next == NULL) {
-+			cFYI(1,("File instance %p removed",tmp));
-+			break;
-+		}
-+	}
-+	read_unlock(&GlobalSMBSeslock);
-+	return rc;
-+}
-+
-+
-+void
-+fill_in_inode(struct inode *tmp_inode,
-+	      FILE_DIRECTORY_INFO * pfindData, int *pobject_type)
-+{
-+	struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
-+	struct cifs_sb_info *cifs_sb = CIFS_SB(tmp_inode->i_sb);
-+
-+	pfindData->ExtFileAttributes =
-+	    le32_to_cpu(pfindData->ExtFileAttributes);
-+	pfindData->AllocationSize = le64_to_cpu(pfindData->AllocationSize);
-+	pfindData->EndOfFile = le64_to_cpu(pfindData->EndOfFile);
-+	cifsInfo->cifsAttrs = pfindData->ExtFileAttributes;
-+	cifsInfo->time = jiffies;
-+
-+	/* Linux can not store file creation time unfortunately so ignore it */
-+	tmp_inode->i_atime =
-+	    cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastAccessTime));
-+	tmp_inode->i_mtime =
-+	    cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastWriteTime));
-+	tmp_inode->i_ctime =
-+	    cifs_NTtimeToUnix(le64_to_cpu(pfindData->ChangeTime));
-+	/* treat dos attribute of read-only as read-only mode bit e.g. 555? */
-+	/* 2767 perms - indicate mandatory locking */
-+		/* BB fill in uid and gid here? with help from winbind? 
-+			or retrieve from NTFS stream extended attribute */
-+	if(atomic_read(&cifsInfo->inUse) == 0) {
-+		tmp_inode->i_uid = cifs_sb->mnt_uid;
-+		tmp_inode->i_gid = cifs_sb->mnt_gid;
-+		/* set default mode. will override for dirs below */
-+		tmp_inode->i_mode = cifs_sb->mnt_file_mode;
-+	}
-+
-+	cFYI(0,
-+	     ("CIFS FFIRST: Attributes came in as 0x%x",
-+	      pfindData->ExtFileAttributes));
-+	if (pfindData->ExtFileAttributes & ATTR_REPARSE) {
-+		*pobject_type = DT_LNK;
-+		/* BB can this and S_IFREG or S_IFDIR be set as in Windows? */
-+		tmp_inode->i_mode |= S_IFLNK;
-+	} else if (pfindData->ExtFileAttributes & ATTR_DIRECTORY) {
-+		*pobject_type = DT_DIR;
-+		/* override default perms since we do not lock dirs */
-+		if(atomic_read(&cifsInfo->inUse) == 0) {
-+			tmp_inode->i_mode = cifs_sb->mnt_dir_mode;
-+		}
-+		tmp_inode->i_mode |= S_IFDIR;
-+	} else {
-+		*pobject_type = DT_REG;
-+		tmp_inode->i_mode |= S_IFREG;
-+		if(pfindData->ExtFileAttributes & ATTR_READONLY)
-+			tmp_inode->i_mode &= ~(S_IWUGO);
-+
-+	}/* could add code here - to validate if device or weird share type? */
-+
-+	/* can not fill in nlink here as in qpathinfo version and Unx search */
-+	if(atomic_read(&cifsInfo->inUse) == 0) {
-+		atomic_set(&cifsInfo->inUse,1);
-+	}
-+	if(is_size_safe_to_change(cifsInfo)) {
-+		/* can not safely change the file size here if the
-+		client is writing to it due to potential races */
-+		tmp_inode->i_size = pfindData->EndOfFile;
-+
-+	/* 512 bytes (2**9) is the fake blocksize that must be used */
-+	/* for this calculation, even though the reported blocksize is larger */
-+		tmp_inode->i_blocks = (512 - 1 + pfindData->AllocationSize) >> 9;
-+	}
-+
-+	if (pfindData->AllocationSize < pfindData->EndOfFile)
-+		cFYI(1, ("Possible sparse file: allocation size less than end of file "));
-+	cFYI(1,
-+	     ("File Size %ld and blocks %ld and blocksize %ld",
-+	      (unsigned long) tmp_inode->i_size, tmp_inode->i_blocks,
-+	      tmp_inode->i_blksize));
-+	if (S_ISREG(tmp_inode->i_mode)) {
-+		cFYI(1, (" File inode "));
-+		tmp_inode->i_op = &cifs_file_inode_ops;
-+		tmp_inode->i_fop = &cifs_file_ops;
-+		tmp_inode->i_data.a_ops = &cifs_addr_ops;
-+	} else if (S_ISDIR(tmp_inode->i_mode)) {
-+		cFYI(1, (" Directory inode"));
-+		tmp_inode->i_op = &cifs_dir_inode_ops;
-+		tmp_inode->i_fop = &cifs_dir_ops;
-+	} else if (S_ISLNK(tmp_inode->i_mode)) {
-+		cFYI(1, (" Symbolic Link inode "));
-+		tmp_inode->i_op = &cifs_symlink_inode_ops;
-+	} else {
-+		cFYI(1, (" Init special inode "));
-+		init_special_inode(tmp_inode, tmp_inode->i_mode,
-+				   kdev_t_to_nr(tmp_inode->i_rdev));
-+	}
-+}
-+
-+void
-+unix_fill_in_inode(struct inode *tmp_inode,
-+		   FILE_UNIX_INFO * pfindData, int *pobject_type)
-+{
-+	struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
-+	cifsInfo->time = jiffies;
-+	atomic_inc(&cifsInfo->inUse);
-+
-+	tmp_inode->i_atime =
-+	    cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastAccessTime));
-+	tmp_inode->i_mtime =
-+	    cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastModificationTime));
-+	tmp_inode->i_ctime =
-+	    cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastStatusChange));
-+
-+	tmp_inode->i_mode = le64_to_cpu(pfindData->Permissions);
-+	pfindData->Type = le32_to_cpu(pfindData->Type);
-+	if (pfindData->Type == UNIX_FILE) {
-+		*pobject_type = DT_REG;
-+		tmp_inode->i_mode |= S_IFREG;
-+	} else if (pfindData->Type == UNIX_SYMLINK) {
-+		*pobject_type = DT_LNK;
-+		tmp_inode->i_mode |= S_IFLNK;
-+	} else if (pfindData->Type == UNIX_DIR) {
-+		*pobject_type = DT_DIR;
-+		tmp_inode->i_mode |= S_IFDIR;
-+	} else if (pfindData->Type == UNIX_CHARDEV) {
-+		*pobject_type = DT_CHR;
-+		tmp_inode->i_mode |= S_IFCHR;
-+		tmp_inode->i_rdev = MKDEV(le64_to_cpu(pfindData->DevMajor),
-+				le64_to_cpu(pfindData->DevMinor) & MINORMASK);
-+	} else if (pfindData->Type == UNIX_BLOCKDEV) {
-+		*pobject_type = DT_BLK;
-+		tmp_inode->i_mode |= S_IFBLK;
-+		tmp_inode->i_rdev = MKDEV(le64_to_cpu(pfindData->DevMajor),
-+				le64_to_cpu(pfindData->DevMinor) & MINORMASK);
-+	} else if (pfindData->Type == UNIX_FIFO) {
-+		*pobject_type = DT_FIFO;
-+		tmp_inode->i_mode |= S_IFIFO;
-+	} else if (pfindData->Type == UNIX_SOCKET) {
-+		*pobject_type = DT_SOCK;
-+		tmp_inode->i_mode |= S_IFSOCK;
-+	}
-+
-+	tmp_inode->i_uid = le64_to_cpu(pfindData->Uid);
-+	tmp_inode->i_gid = le64_to_cpu(pfindData->Gid);
-+	tmp_inode->i_nlink = le64_to_cpu(pfindData->Nlinks);
-+
-+	pfindData->NumOfBytes = le64_to_cpu(pfindData->NumOfBytes);
-+	if(is_size_safe_to_change(cifsInfo)) {
-+		/* can not safely change the file size here if the
-+		client is writing to it due to potential races */
-+		pfindData->EndOfFile = le64_to_cpu(pfindData->EndOfFile);
-+		tmp_inode->i_size = pfindData->EndOfFile;
-+
-+	/* 512 bytes (2**9) is the fake blocksize that must be used */
-+	/* for this calculation, not the real blocksize */
-+		tmp_inode->i_blocks = (512 - 1 + pfindData->NumOfBytes) >> 9;
-+	}
-+
-+	if (S_ISREG(tmp_inode->i_mode)) {
-+		cFYI(1, ("File inode"));
-+		tmp_inode->i_op = &cifs_file_inode_ops;
-+		tmp_inode->i_fop = &cifs_file_ops;
-+		tmp_inode->i_data.a_ops = &cifs_addr_ops;
-+	} else if (S_ISDIR(tmp_inode->i_mode)) {
-+		cFYI(1, ("Directory inode"));
-+		tmp_inode->i_op = &cifs_dir_inode_ops;
-+		tmp_inode->i_fop = &cifs_dir_ops;
-+	} else if (S_ISLNK(tmp_inode->i_mode)) {
-+		cFYI(1, ("Symbolic Link inode"));
-+		tmp_inode->i_op = &cifs_symlink_inode_ops;
-+/* tmp_inode->i_fop = *//* do not need to set to anything */
-+	} else {
-+		cFYI(1, ("Special inode")); 
-+		init_special_inode(tmp_inode, tmp_inode->i_mode,
-+				   kdev_t_to_nr(tmp_inode->i_rdev));
-+	}
-+}
-+
-+static void
-+construct_dentry(struct qstr *qstring, struct file *file,
-+		 struct inode **ptmp_inode, struct dentry **pnew_dentry)
-+{
-+	struct dentry *tmp_dentry;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	struct cifsInodeInfo *pCifsI;
-+
-+	cFYI(1, ("For %s ", qstring->name));
-+	cifs_sb = CIFS_SB(file->f_dentry->d_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	qstring->hash = full_name_hash(qstring->name, qstring->len);
-+	tmp_dentry = d_lookup(file->f_dentry, qstring);
-+	if (tmp_dentry) {
-+		cFYI(0, (" existing dentry with inode 0x%p", tmp_dentry->d_inode));
-+		*ptmp_inode = tmp_dentry->d_inode;
-+		/* BB overwrite the old name? i.e. tmp_dentry->d_name and tmp_dentry->d_name.len ?? */
-+		if(*ptmp_inode == NULL) {
-+			*ptmp_inode = new_inode(file->f_dentry->d_sb);
-+			if(*ptmp_inode == NULL)
-+				return;
-+			d_instantiate(tmp_dentry, *ptmp_inode);
-+			insert_inode_hash(*ptmp_inode);
-+			pCifsI = CIFS_I(*ptmp_inode);
-+			INIT_LIST_HEAD(&pCifsI->openFileList);
-+			/* can not enable caching for this inode
-+			until a file instance is open and we
-+			can check the oplock flag on the open
-+			response */
-+			(*ptmp_inode)->i_blksize = CIFS_MAX_MSGSIZE;
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,15))
-+			(*ptmp_inode)->i_blkbits = 14;  /* 2**14 = CIFS_MAX_MSGSIZE */
-+#endif
-+			pCifsI->clientCanCacheRead = FALSE;
-+			pCifsI->clientCanCacheAll = FALSE;
-+			pCifsI->time = 0;
-+			/* do not need to set cifs Attrs since
-+			they are about to be overwritten
-+			in fill_in_inode */
-+			atomic_set(&pCifsI->inUse, 0);
-+		}
-+	} else {
-+		tmp_dentry = d_alloc(file->f_dentry, qstring);
-+		if(tmp_dentry == NULL) {
-+			cERROR(1,("Failed allocating dentry"));
-+			return;
-+		}
-+
-+		if(ptmp_inode) {			
-+			*ptmp_inode = new_inode(file->f_dentry->d_sb);
-+			if(*ptmp_inode == NULL)
-+				return;
-+			pCifsI = CIFS_I(*ptmp_inode);
-+			insert_inode_hash(*ptmp_inode);
-+			INIT_LIST_HEAD(&pCifsI->openFileList);
-+			/* can not enable caching for this inode 
-+			until a file instance is open and we
-+			can check the oplock flag on the open
-+			response */
-+	                (*ptmp_inode)->i_blksize = CIFS_MAX_MSGSIZE;
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,15))
-+			(*ptmp_inode)->i_blkbits = 14;  /* 2**14 = CIFS_MAX_MSGSIZE */
-+#endif
-+			pCifsI->clientCanCacheRead = FALSE;
-+			pCifsI->clientCanCacheAll = FALSE;
-+			pCifsI->time = 0;
-+			/* do not need to set cifs Attrs since
-+				they are about to be overwritten 
-+				in fill_in_inode */
-+			atomic_set(&pCifsI->inUse, 0);
-+		}
-+		tmp_dentry->d_op = &cifs_dentry_ops;
-+		d_instantiate(tmp_dentry, *ptmp_inode);
-+		d_rehash(tmp_dentry);
-+	}
-+
-+	tmp_dentry->d_time = jiffies;
-+	*pnew_dentry = tmp_dentry;
-+}
-+
-+static void reset_resume_key(struct file * dir_file, 
-+				unsigned char * filename, 
-+				unsigned int len,int Unicode,struct nls_table * nls_tab) {
-+	struct cifsFileInfo *cifsFile;
-+
-+	cifsFile = (struct cifsFileInfo *)dir_file->private_data;
-+	if(cifsFile == NULL)
-+		return;
-+	if(cifsFile->search_resume_name) {
-+		kfree(cifsFile->search_resume_name);
-+	}
-+
-+	if(Unicode) 
-+		len *= 2;
-+	cifsFile->resume_name_length = len;
-+
-+	cifsFile->search_resume_name = 
-+		kmalloc(cifsFile->resume_name_length, GFP_KERNEL);
-+
-+	if(cifsFile->search_resume_name == NULL) {
-+		cERROR(1,("failed new resume key allocate, length %d",
-+				  cifsFile->resume_name_length));
-+		return;
-+	}
-+	if(Unicode)
-+		cifs_strtoUCS((wchar_t *) cifsFile->search_resume_name,
-+			filename, len, nls_tab);
-+	else
-+		memcpy(cifsFile->search_resume_name, filename, 
-+		   cifsFile->resume_name_length);
-+	cFYI(1,("Reset resume key to: %s with len %d",filename,len));
-+	return;
-+}
-+
-+
-+
-+static int
-+cifs_filldir(struct qstr *pqstring, FILE_DIRECTORY_INFO * pfindData,
-+	     struct file *file, filldir_t filldir, void *direntry)
-+{
-+	struct inode *tmp_inode;
-+	struct dentry *tmp_dentry;
-+	int object_type,rc;
-+
-+	pqstring->name = pfindData->FileName;
-+	pqstring->len = pfindData->FileNameLength;
-+
-+	construct_dentry(pqstring, file, &tmp_inode, &tmp_dentry);
-+	if((tmp_inode == NULL) || (tmp_dentry == NULL)) {
-+		return -ENOMEM;
-+	}
-+	fill_in_inode(tmp_inode, pfindData, &object_type);
-+	rc = filldir(direntry, pfindData->FileName, pqstring->len, file->f_pos,
-+		tmp_inode->i_ino, object_type);
-+	if(rc) {
-+		/* due to readdir error we need to recalculate resume 
-+		key so next readdir will restart on right entry */
-+		cFYI(1,("Error %d on filldir of %s",rc ,pfindData->FileName));
-+	}
-+	dput(tmp_dentry);
-+	return rc;
-+}
-+
-+static int
-+cifs_filldir_unix(struct qstr *pqstring,
-+		  FILE_UNIX_INFO * pUnixFindData, struct file *file,
-+		  filldir_t filldir, void *direntry)
-+{
-+	struct inode *tmp_inode;
-+	struct dentry *tmp_dentry;
-+	int object_type, rc;
-+
-+	pqstring->name = pUnixFindData->FileName;
-+	pqstring->len = strnlen(pUnixFindData->FileName, MAX_PATHCONF);
-+
-+	construct_dentry(pqstring, file, &tmp_inode, &tmp_dentry);
-+        if((tmp_inode == NULL) || (tmp_dentry == NULL)) {
-+                return -ENOMEM;
-+        }
-+
-+	unix_fill_in_inode(tmp_inode, pUnixFindData, &object_type);
-+	rc = filldir(direntry, pUnixFindData->FileName, pqstring->len,
-+		file->f_pos, tmp_inode->i_ino, object_type);
-+	if(rc) {
-+		/* due to readdir error we need to recalculate resume 
-+			key so next readdir will restart on right entry */
-+		cFYI(1,("Error %d on filldir of %s",rc ,pUnixFindData->FileName));
-+	}
-+	dput(tmp_dentry);
-+	return rc;
-+}
-+
-+int
-+cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
-+{
-+	int rc = 0;
-+	int xid;
-+	int Unicode = FALSE;
-+	int UnixSearch = FALSE;
-+	unsigned int bufsize, i;
-+	__u16 searchHandle;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	struct cifsFileInfo *cifsFile = NULL;
-+	char *full_path = NULL;
-+	char *data;
-+	struct qstr qstring;
-+	T2_FFIRST_RSP_PARMS findParms;
-+	T2_FNEXT_RSP_PARMS findNextParms;
-+	FILE_DIRECTORY_INFO *pfindData;
-+	FILE_DIRECTORY_INFO *lastFindData;
-+	FILE_UNIX_INFO *pfindDataUnix;
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(file->f_dentry->d_sb);
-+	pTcon = cifs_sb->tcon;
-+	bufsize = pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE;
-+	if(bufsize > CIFS_MAX_MSGSIZE) {
-+		FreeXid(xid);
-+		return -EIO;
-+	}
-+	data = kmalloc(bufsize, GFP_KERNEL);
-+	pfindData = (FILE_DIRECTORY_INFO *) data;
-+
-+	if(file->f_dentry == NULL) {
-+		FreeXid(xid);
-+		return -EIO;
-+	}
-+	down(&file->f_dentry->d_sb->s_vfs_rename_sem);
-+	full_path = build_wildcard_path_from_dentry(file->f_dentry);
-+	up(&file->f_dentry->d_sb->s_vfs_rename_sem);
-+
-+
-+	cFYI(1, ("Full path: %s start at: %lld ", full_path, file->f_pos));
-+
-+	switch ((int) file->f_pos) {
-+	case 0:
-+		if (filldir(direntry, ".", 1, file->f_pos,
-+		     file->f_dentry->d_inode->i_ino, DT_DIR) < 0) {
-+			cERROR(1, ("Filldir for current dir failed "));
-+			break;
-+		}
-+		file->f_pos++;
-+		/* fallthrough */
-+	case 1:
-+		if (filldir(direntry, "..", 2, file->f_pos,
-+		     file->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) {
-+			cERROR(1, ("Filldir for parent dir failed "));
-+			break;
-+		}
-+		file->f_pos++;
-+		/* fallthrough */
-+	case 2:
-+		if (file->private_data != NULL) {
-+			cifsFile =
-+				(struct cifsFileInfo *) file->private_data;
-+			if (cifsFile->endOfSearch) {
-+				if(cifsFile->emptyDir) {
-+					cFYI(1, ("End of search, empty dir"));
-+					rc = 0;
-+					break;
-+				}
-+			} else {
-+				cifsFile->invalidHandle = TRUE;
-+				CIFSFindClose(xid, pTcon, cifsFile->netfid);
-+			}
-+			if(cifsFile->search_resume_name) {
-+				kfree(cifsFile->search_resume_name);
-+				cifsFile->search_resume_name = NULL;
-+			}
-+		}
-+		rc = CIFSFindFirst(xid, pTcon, full_path, pfindData,
-+				&findParms, cifs_sb->local_nls,
-+				&Unicode, &UnixSearch);
-+		cFYI(1, ("Count: %d  End: %d ", findParms.SearchCount,
-+			findParms.EndofSearch));
-+ 
-+		if (rc == 0) {
-+			searchHandle = findParms.SearchHandle;
-+			if(file->private_data == NULL)
-+				file->private_data =
-+					kmalloc(sizeof(struct cifsFileInfo),GFP_KERNEL);
-+			if (file->private_data) {
-+				memset(file->private_data, 0,
-+				       sizeof (struct cifsFileInfo));
-+				cifsFile =
-+				    (struct cifsFileInfo *) file->private_data;
-+				cifsFile->netfid = searchHandle;
-+				cifsFile->invalidHandle = FALSE;
-+				init_MUTEX(&cifsFile->fh_sem);
-+			} else {
-+				rc = -ENOMEM;
-+				break;
-+			}
-+
-+			renew_parental_timestamps(file->f_dentry);
-+			lastFindData = 
-+				(FILE_DIRECTORY_INFO *) ((char *) pfindData + 
-+					findParms.LastNameOffset);
-+			if((char *)lastFindData > (char *)pfindData + bufsize) {
-+				cFYI(1,("last search entry past end of packet"));
-+				rc = -EIO;
-+				break;
-+			}
-+			/* Offset of resume key same for levels 257 and 514 */
-+			cifsFile->resume_key = lastFindData->FileIndex;
-+			if(UnixSearch == FALSE) {
-+				cifsFile->resume_name_length = 
-+					le32_to_cpu(lastFindData->FileNameLength);
-+				if(cifsFile->resume_name_length > bufsize - 64) {
-+					cFYI(1,("Illegal resume file name length %d",
-+						cifsFile->resume_name_length));
-+					rc = -ENOMEM;
-+					break;
-+				}
-+				cifsFile->search_resume_name = 
-+					kmalloc(cifsFile->resume_name_length, GFP_KERNEL);
-+				cFYI(1,("Last file: %s with name %d bytes long",
-+					lastFindData->FileName,
-+					cifsFile->resume_name_length));
-+				memcpy(cifsFile->search_resume_name,
-+					lastFindData->FileName, 
-+					cifsFile->resume_name_length);
-+			} else {
-+				pfindDataUnix = (FILE_UNIX_INFO *)lastFindData;
-+				if (Unicode == TRUE) {
-+					for(i=0;(pfindDataUnix->FileName[i] 
-+						    | pfindDataUnix->FileName[i+1]);
-+						i+=2) {
-+						if(i > bufsize-64)
-+							break;
-+					}
-+					cifsFile->resume_name_length = i + 2;
-+				} else {
-+					cifsFile->resume_name_length = 
-+						strnlen(pfindDataUnix->FileName,
-+							bufsize-63);
-+				}
-+				if(cifsFile->resume_name_length > bufsize - 64) {
-+					cFYI(1,("Illegal resume file name length %d",
-+						cifsFile->resume_name_length));
-+					rc = -ENOMEM;
-+					break;
-+				}
-+				cifsFile->search_resume_name = 
-+					kmalloc(cifsFile->resume_name_length, GFP_KERNEL);
-+				cFYI(1,("Last file: %s with name %d bytes long",
-+					pfindDataUnix->FileName,
-+					cifsFile->resume_name_length));
-+				memcpy(cifsFile->search_resume_name,
-+					pfindDataUnix->FileName, 
-+					cifsFile->resume_name_length);
-+			}
-+			for (i = 2; i < (unsigned int)findParms.SearchCount + 2; i++) {
-+				if (UnixSearch == FALSE) {
-+					pfindData->FileNameLength =
-+					  le32_to_cpu(pfindData->FileNameLength);
-+					if (Unicode == TRUE)
-+						pfindData->FileNameLength =
-+						    cifs_strfromUCS_le
-+						    (pfindData->FileName,
-+						     (wchar_t *)
-+						     pfindData->FileName,
-+						     (pfindData->
-+						      FileNameLength) / 2,
-+						     cifs_sb->local_nls);
-+					qstring.len = pfindData->FileNameLength;
-+					if (((qstring.len != 1)
-+					     || (pfindData->FileName[0] != '.'))
-+					    && ((qstring.len != 2)
-+						|| (pfindData->
-+						    FileName[0] != '.')
-+						|| (pfindData->
-+						    FileName[1] != '.'))) {
-+						if(cifs_filldir(&qstring,
-+							     pfindData,
-+							     file, filldir,
-+							     direntry)) {
-+							/* do not end search if
-+								kernel not ready to take
-+								remaining entries yet */
-+							reset_resume_key(file, pfindData->FileName,qstring.len,
-+								Unicode, cifs_sb->local_nls);
-+							findParms.EndofSearch = 0;
-+							break;
-+						}
-+						file->f_pos++;
-+					}
-+				} else {	/* UnixSearch */
-+					pfindDataUnix =
-+					    (FILE_UNIX_INFO *) pfindData;
-+					if (Unicode == TRUE)
-+						qstring.len =
-+							cifs_strfromUCS_le
-+							(pfindDataUnix->FileName,
-+							(wchar_t *)
-+							pfindDataUnix->FileName,
-+							MAX_PATHCONF,
-+							cifs_sb->local_nls);
-+					else
-+						qstring.len =
-+							strnlen(pfindDataUnix->
-+							  FileName,
-+							  MAX_PATHCONF);
-+					if (((qstring.len != 1)
-+					     || (pfindDataUnix->
-+						 FileName[0] != '.'))
-+					    && ((qstring.len != 2)
-+						|| (pfindDataUnix->
-+						    FileName[0] != '.')
-+						|| (pfindDataUnix->
-+						    FileName[1] != '.'))) {
-+						if(cifs_filldir_unix(&qstring,
-+								  pfindDataUnix,
-+								  file,
-+								  filldir,
-+								  direntry)) {
-+							/* do not end search if
-+								kernel not ready to take
-+								remaining entries yet */
-+							findParms.EndofSearch = 0;
-+							reset_resume_key(file, pfindDataUnix->FileName,
-+								qstring.len,Unicode,cifs_sb->local_nls);
-+							break;
-+						}
-+						file->f_pos++;
-+					}
-+				}
-+				/* works also for Unix ff struct since first field of both */
-+				pfindData = 
-+					(FILE_DIRECTORY_INFO *) ((char *) pfindData
-+						 + le32_to_cpu(pfindData->NextEntryOffset));
-+				/* BB also should check to make sure that pointer is not beyond the end of the SMB */
-+				/* if(pfindData > lastFindData) rc = -EIO; break; */
-+			}	/* end for loop */
-+			if ((findParms.EndofSearch != 0) && cifsFile) {
-+				cifsFile->endOfSearch = TRUE;
-+				if(findParms.SearchCount == 2)
-+					cifsFile->emptyDir = TRUE;
-+			}
-+		} else {
-+			if (cifsFile)
-+				cifsFile->endOfSearch = TRUE;
-+			/* unless parent directory gone do not return error */
-+			rc = 0;
-+		}
-+		break;
-+	default:
-+		if (file->private_data == NULL) {
-+			rc = -EBADF;
-+			cFYI(1,
-+			     ("Readdir on closed srch, pos = %lld",
-+			      file->f_pos));
-+		} else {
-+			cifsFile = (struct cifsFileInfo *) file->private_data;
-+			if (cifsFile->endOfSearch) {
-+				rc = 0;
-+				cFYI(1, ("End of search "));
-+				break;
-+			}
-+			searchHandle = cifsFile->netfid;
-+			rc = CIFSFindNext(xid, pTcon, pfindData,
-+				&findNextParms, searchHandle, 
-+				cifsFile->search_resume_name,
-+				cifsFile->resume_name_length,
-+				cifsFile->resume_key,
-+				&Unicode, &UnixSearch);
-+			cFYI(1,("Count: %d  End: %d ",
-+			      findNextParms.SearchCount,
-+			      findNextParms.EndofSearch));
-+			if ((rc == 0) && (findNextParms.SearchCount != 0)) {
-+			/* BB save off resume key, key name and name length  */
-+				lastFindData = 
-+					(FILE_DIRECTORY_INFO *) ((char *) pfindData 
-+						+ findNextParms.LastNameOffset);
-+				if((char *)lastFindData > (char *)pfindData + bufsize) {
-+					cFYI(1,("last search entry past end of packet"));
-+					rc = -EIO;
-+					break;
-+				}
-+				/* Offset of resume key same for levels 257 and 514 */
-+				cifsFile->resume_key = lastFindData->FileIndex;
-+
-+				if(UnixSearch == FALSE) {
-+					cifsFile->resume_name_length = 
-+						le32_to_cpu(lastFindData->FileNameLength);
-+					if(cifsFile->resume_name_length > bufsize - 64) {
-+						cFYI(1,("Illegal resume file name length %d",
-+							cifsFile->resume_name_length));
-+						rc = -ENOMEM;
-+						break;
-+					}
-+					/* Free the memory allocated by previous findfirst 
-+					or findnext call - we can not reuse the memory since
-+					the resume name may not be same string length */
-+					if(cifsFile->search_resume_name)
-+						kfree(cifsFile->search_resume_name);
-+					cifsFile->search_resume_name = 
-+						kmalloc(cifsFile->resume_name_length, GFP_KERNEL);
-+					cFYI(1,("Last file: %s with name %d bytes long",
-+						lastFindData->FileName,
-+						cifsFile->resume_name_length));
-+					memcpy(cifsFile->search_resume_name,
-+						lastFindData->FileName, 
-+						cifsFile->resume_name_length);
-+				} else {
-+					pfindDataUnix = (FILE_UNIX_INFO *)lastFindData;
-+					if (Unicode == TRUE) {
-+						for(i=0;(pfindDataUnix->FileName[i] 
-+								| pfindDataUnix->FileName[i+1]);
-+							i+=2) {
-+							if(i > bufsize-64)
-+								break;
-+						}
-+						cifsFile->resume_name_length = i + 2;
-+					} else {
-+						cifsFile->resume_name_length = 
-+							strnlen(pfindDataUnix->
-+							 FileName,
-+							 MAX_PATHCONF);
-+					}
-+					if(cifsFile->resume_name_length > bufsize - 64) {
-+						cFYI(1,("Illegal resume file name length %d",
-+								cifsFile->resume_name_length));
-+						rc = -ENOMEM;
-+						break;
-+					}
-+					/* Free the memory allocated by previous findfirst 
-+					or findnext call - we can not reuse the memory since
-+					the resume name may not be same string length */
-+					if(cifsFile->search_resume_name)
-+						kfree(cifsFile->search_resume_name);
-+					cifsFile->search_resume_name = 
-+						kmalloc(cifsFile->resume_name_length, GFP_KERNEL);
-+					cFYI(1,("fnext last file: %s with name %d bytes long",
-+						pfindDataUnix->FileName,
-+						cifsFile->resume_name_length));
-+					memcpy(cifsFile->search_resume_name,
-+						pfindDataUnix->FileName, 
-+						cifsFile->resume_name_length);
-+				}
-+
-+				for (i = 0; i < findNextParms.SearchCount; i++) {
-+					pfindData->FileNameLength =
-+					    le32_to_cpu(pfindData->
-+							FileNameLength);
-+					if (UnixSearch == FALSE) {
-+						if (Unicode == TRUE)
-+							pfindData->FileNameLength =
-+							  cifs_strfromUCS_le
-+							  (pfindData->FileName,
-+							  (wchar_t *)
-+							  pfindData->FileName,
-+							  (pfindData->FileNameLength)/ 2,
-+							  cifs_sb->local_nls);
-+						qstring.len = 
-+							pfindData->FileNameLength;
-+						if (((qstring.len != 1)
-+						    || (pfindData->FileName[0] != '.'))
-+						    && ((qstring.len != 2)
-+							|| (pfindData->FileName[0] != '.')
-+							|| (pfindData->FileName[1] !=
-+							    '.'))) {
-+							if(cifs_filldir
-+							    (&qstring,
-+							     pfindData,
-+							     file, filldir,
-+							     direntry)) {
-+							/* do not end search if
-+								kernel not ready to take
-+								remaining entries yet */
-+								findNextParms.EndofSearch = 0;
-+								reset_resume_key(file, pfindData->FileName,qstring.len,
-+									Unicode,cifs_sb->local_nls);
-+								break;
-+							}
-+							file->f_pos++;
-+						}
-+					} else {	/* UnixSearch */
-+						pfindDataUnix =
-+						    (FILE_UNIX_INFO *)
-+						    pfindData;
-+						if (Unicode == TRUE)
-+							qstring.len =
-+							  cifs_strfromUCS_le
-+							  (pfindDataUnix->FileName,
-+							  (wchar_t *)
-+							  pfindDataUnix->FileName,
-+							  MAX_PATHCONF,
-+							  cifs_sb->local_nls);
-+						else
-+							qstring.len =
-+							  strnlen
-+							  (pfindDataUnix->
-+							  FileName,
-+							  MAX_PATHCONF);
-+						if (((qstring.len != 1)
-+						     || (pfindDataUnix->
-+							 FileName[0] != '.'))
-+						    && ((qstring.len != 2)
-+							|| (pfindDataUnix->
-+							    FileName[0] != '.')
-+							|| (pfindDataUnix->
-+							    FileName[1] !=
-+							    '.'))) {
-+							if(cifs_filldir_unix
-+							    (&qstring,
-+							     pfindDataUnix,
-+							     file, filldir,
-+							     direntry)) {
-+								/* do not end search if
-+								kernel not ready to take
-+								remaining entries yet */
-+								findNextParms.EndofSearch = 0;
-+								reset_resume_key(file, pfindDataUnix->FileName,qstring.len,
-+									Unicode,cifs_sb->local_nls);
-+								break;
-+							}
-+							file->f_pos++;
-+						}
-+					}
-+					pfindData = (FILE_DIRECTORY_INFO *) ((char *) pfindData + le32_to_cpu(pfindData->NextEntryOffset));	/* works also for Unix find struct since this is the first field of both */
-+					/* BB also should check to make sure that pointer is not beyond the end of the SMB */
-+				} /* end for loop */
-+				if (findNextParms.EndofSearch != 0) {
-+					cifsFile->endOfSearch = TRUE;
-+				}
-+			} else {
-+				cifsFile->endOfSearch = TRUE;
-+				rc = 0;	/* unless parent directory disappeared - do not return error here (eg Access Denied or no more files) */
-+			}
-+		}
-+	} /* end switch */
-+	if (data)
-+		kfree(data);
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+
-+	return rc;
-+}
-+int cifs_prepare_write(struct file *file, struct page *page,
-+			unsigned from, unsigned to)
-+{
-+	int rc = 0;
-+        loff_t offset = (loff_t)page->index << PAGE_CACHE_SHIFT;
-+	cFYI(1,("prepare write for page %p from %d to %d",page,from,to));
-+	if (!Page_Uptodate(page)) {
-+	/*	if (to - from != PAGE_CACHE_SIZE) {
-+			void *kaddr = kmap_atomic(page, KM_USER0);
-+			memset(kaddr, 0, from);
-+			memset(kaddr + to, 0, PAGE_CACHE_SIZE - to);
-+			flush_dcache_page(page);
-+			kunmap_atomic(kaddr, KM_USER0);
-+		} */
-+		/* If we are writing a full page it will be up to date,
-+		no need to read from the server */
-+		if((to==PAGE_CACHE_SIZE) && (from == 0))
-+			SetPageUptodate(page);
-+
-+		/* might as well read a page, it is fast enough */
-+		if((file->f_flags & O_ACCMODE) != O_WRONLY) {
-+			rc = cifs_readpage_worker(file,page,&offset);
-+		} else {
-+		/* should we try using another
-+		file handle if there is one - how would we lock it
-+		to prevent close of that handle racing with this read? */
-+		/* In any case this will be written out by commit_write */
-+		}
-+	}
-+
-+	/* BB should we pass any errors back? e.g. if we do not have read access to the file */
-+	return 0;
-+}
-+
-+
-+struct address_space_operations cifs_addr_ops = {
-+	.readpage = cifs_readpage,
-+/*	.readpages = cifs_readpages, */
-+	.writepage = cifs_writepage,
-+	.prepare_write = cifs_prepare_write, 
-+	.commit_write = cifs_commit_write,
-+	.sync_page = cifs_sync_page,
-+	/*.direct_IO = */
-+};
-diff -urN linux-2.4.29.old/fs/cifs/inode.c linux-2.4.29/fs/cifs/inode.c
---- linux-2.4.29.old/fs/cifs/inode.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/inode.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,1079 @@
-+/*
-+ *   fs/cifs/inode.c
-+ *
-+ *   Copyright (C) International Business Machines  Corp., 2002,2003
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/fs.h>
-+#include <linux/stat.h>
-+#include <linux/pagemap.h>
-+#include <linux/version.h>
-+#include <asm/div64.h>
-+#include "cifsfs.h"
-+#include "cifspdu.h"
-+#include "cifsglob.h"
-+#include "cifsproto.h"
-+#include "cifs_debug.h"
-+#include "cifs_fs_sb.h"
-+
-+extern int is_size_safe_to_change(struct cifsInodeInfo *);
-+
-+struct inode * get_cifs_inode(struct super_block * sb)
-+{
-+	struct inode * newinode;
-+	newinode = new_inode(sb);
-+	cFYI(1,("got new inode %p",newinode));
-+	if(newinode) {    
-+		struct cifsInodeInfo * cifsInfo = CIFS_I(newinode);
-+		cifsInfo->clientCanCacheRead = FALSE;
-+		cifsInfo->clientCanCacheAll = FALSE;
-+		INIT_LIST_HEAD(&cifsInfo->openFileList);
-+		cifsInfo->cifsAttrs = 0x20;   /* default */
-+		newinode->i_blksize = CIFS_MAX_MSGSIZE;
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,15))
-+		newinode->i_blkbits = 14;  /* 2**14 = CIFS_MAX_MSGSIZE */
-+#endif
-+		atomic_set(&cifsInfo->inUse, 0);
-+		cifsInfo->time = 0;
-+		insert_inode_hash(newinode);
-+	}
-+	return newinode;
-+
-+}
-+
-+int
-+cifs_get_inode_info_unix(struct inode **pinode,
-+			 const unsigned char *search_path,
-+			 struct super_block *sb,int xid)
-+{
-+	int rc = 0;
-+	FILE_UNIX_BASIC_INFO findData;
-+	struct cifsTconInfo *pTcon;
-+	struct inode *inode;
-+	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
-+	char *tmp_path;
-+
-+	pTcon = cifs_sb->tcon;
-+	cFYI(1, (" Getting info on %s ", search_path));
-+	/* we could have done a find first instead but this returns more info */
-+	rc = CIFSSMBUnixQPathInfo(xid, pTcon, search_path, &findData,
-+				  cifs_sb->local_nls);
-+	/* dump_mem("\nUnixQPathInfo return data", &findData, sizeof(findData)); */
-+	if (rc) {
-+		if (rc == -EREMOTE) {
-+			tmp_path =
-+			    kmalloc(strnlen
-+				    (pTcon->treeName,
-+				     MAX_TREE_SIZE + 1) +
-+				    strnlen(search_path, MAX_PATHCONF) + 1,
-+				    GFP_KERNEL);
-+			if (tmp_path == NULL) {
-+				return -ENOMEM;
-+			}
-+        /* have to skip first of the double backslash of UNC name */
-+			strncpy(tmp_path, pTcon->treeName, MAX_TREE_SIZE);	
-+			strncat(tmp_path, search_path, MAX_PATHCONF);
-+			rc = connect_to_dfs_path(xid, pTcon->ses,
-+						 /* treename + */ tmp_path,
-+						 cifs_sb->local_nls);
-+			kfree(tmp_path);
-+
-+			/* BB fix up inode etc. */
-+		} else if (rc) {
-+			return rc;
-+		}
-+
-+	} else {
-+		struct cifsInodeInfo *cifsInfo;
-+
-+		/* get new inode */
-+		if (*pinode == NULL) {
-+			*pinode = get_cifs_inode(sb);
-+		}
-+		if(*pinode == NULL) {
-+			return -ENOMEM;
-+		}
-+			
-+		inode = *pinode;
-+		cifsInfo = CIFS_I(inode);
-+
-+		cFYI(1, (" Old time %ld ", cifsInfo->time));
-+		cifsInfo->time = jiffies;
-+		cFYI(1, (" New time %ld ", cifsInfo->time));
-+		atomic_set(&cifsInfo->inUse,1);	/* ok to set on every refresh of inode */
-+
-+		inode->i_atime =
-+		    cifs_NTtimeToUnix(le64_to_cpu(findData.LastAccessTime));
-+		inode->i_mtime =
-+		    cifs_NTtimeToUnix(le64_to_cpu
-+				(findData.LastModificationTime));
-+		inode->i_ctime =
-+		    cifs_NTtimeToUnix(le64_to_cpu(findData.LastStatusChange));
-+		inode->i_mode = le64_to_cpu(findData.Permissions);
-+		findData.Type = le32_to_cpu(findData.Type);
-+		if (findData.Type == UNIX_FILE) {
-+			inode->i_mode |= S_IFREG;
-+		} else if (findData.Type == UNIX_SYMLINK) {
-+			inode->i_mode |= S_IFLNK;
-+		} else if (findData.Type == UNIX_DIR) {
-+			inode->i_mode |= S_IFDIR;
-+		} else if (findData.Type == UNIX_CHARDEV) {
-+			inode->i_mode |= S_IFCHR;
-+			inode->i_rdev = MKDEV(le64_to_cpu(findData.DevMajor),
-+				le64_to_cpu(findData.DevMinor) & MINORMASK);
-+		} else if (findData.Type == UNIX_BLOCKDEV) {
-+			inode->i_mode |= S_IFBLK;
-+			inode->i_rdev = MKDEV(le64_to_cpu(findData.DevMajor),
-+				le64_to_cpu(findData.DevMinor) & MINORMASK);
-+		} else if (findData.Type == UNIX_FIFO) {
-+			inode->i_mode |= S_IFIFO;
-+		} else if (findData.Type == UNIX_SOCKET) {
-+			inode->i_mode |= S_IFSOCK;
-+		}
-+		inode->i_uid = le64_to_cpu(findData.Uid);
-+		inode->i_gid = le64_to_cpu(findData.Gid);
-+		inode->i_nlink = le64_to_cpu(findData.Nlinks);
-+		findData.NumOfBytes = le64_to_cpu(findData.NumOfBytes);
-+		findData.EndOfFile = le64_to_cpu(findData.EndOfFile);
-+
-+		if(is_size_safe_to_change(cifsInfo)) {
-+		/* can not safely change the file size here if the
-+		   client is writing to it due to potential races */
-+			inode->i_size = findData.EndOfFile;
-+/* blksize needs to be multiple of two. So safer to default to blksize
-+	and blkbits set in superblock so 2**blkbits and blksize will match */
-+/*		inode->i_blksize =
-+		    (pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
-+
-+		/* This seems incredibly stupid but it turns out that
-+		i_blocks is not related to (i_size / i_blksize), instead a
-+		size of 512 is required to be used for calculating num blocks */
-+		 
-+
-+/*		inode->i_blocks = 
-+	                (inode->i_blksize - 1 + findData.NumOfBytes) >> inode->i_blkbits;*/
-+
-+		/* 512 bytes (2**9) is the fake blocksize that must be used */
-+		/* for this calculation */
-+			inode->i_blocks = (512 - 1 + findData.NumOfBytes) >> 9;
-+		}
-+
-+		if (findData.NumOfBytes < findData.EndOfFile)
-+			cFYI(1, ("Server inconsistency Error: it says allocation size less than end of file "));
-+		cFYI(1,
-+		     ("Size %ld and blocks %ld ",
-+		      (unsigned long) inode->i_size, inode->i_blocks));
-+		if (S_ISREG(inode->i_mode)) {
-+			cFYI(1, (" File inode "));
-+			inode->i_op = &cifs_file_inode_ops;
-+			inode->i_fop = &cifs_file_ops;
-+			inode->i_data.a_ops = &cifs_addr_ops;
-+		} else if (S_ISDIR(inode->i_mode)) {
-+			cFYI(1, (" Directory inode"));
-+			inode->i_op = &cifs_dir_inode_ops;
-+			inode->i_fop = &cifs_dir_ops;
-+		} else if (S_ISLNK(inode->i_mode)) {
-+			cFYI(1, (" Symbolic Link inode "));
-+			inode->i_op = &cifs_symlink_inode_ops;
-+/* tmp_inode->i_fop = *//* do not need to set to anything */
-+		} else {
-+			cFYI(1, (" Init special inode "));
-+			init_special_inode(inode, inode->i_mode,
-+					   kdev_t_to_nr(inode->i_rdev));
-+		}
-+	}
-+	return rc;
-+}
-+
-+int
-+cifs_get_inode_info(struct inode **pinode, const unsigned char *search_path, 
-+		FILE_ALL_INFO * pfindData, struct super_block *sb, int xid)
-+{
-+	int rc = 0;
-+	struct cifsTconInfo *pTcon;
-+	struct inode *inode;
-+	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
-+	char *tmp_path;
-+	char *buf = NULL;
-+
-+	pTcon = cifs_sb->tcon;
-+	cFYI(1,("Getting info on %s ", search_path));
-+
-+	if((pfindData == NULL) && (*pinode != NULL)) {
-+		if(CIFS_I(*pinode)->clientCanCacheRead) {
-+			cFYI(1,("No need to revalidate inode sizes on cached file "));
-+			return rc;
-+		}
-+	}
-+
-+	/* if file info not passed in then get it from server */
-+	if(pfindData == NULL) {
-+		buf = kmalloc(sizeof(FILE_ALL_INFO),GFP_KERNEL);
-+		pfindData = (FILE_ALL_INFO *)buf;
-+	/* could do find first instead but this returns more info */
-+		rc = CIFSSMBQPathInfo(xid, pTcon, search_path, pfindData,
-+			      cifs_sb->local_nls);
-+	}
-+	/* dump_mem("\nQPathInfo return data",&findData, sizeof(findData)); */
-+	if (rc) {
-+		if (rc == -EREMOTE) {
-+			tmp_path =
-+			    kmalloc(strnlen
-+				    (pTcon->treeName,
-+				     MAX_TREE_SIZE + 1) +
-+				    strnlen(search_path, MAX_PATHCONF) + 1,
-+				    GFP_KERNEL);
-+			if (tmp_path == NULL) {
-+				if(buf)
-+					kfree(buf);
-+				return -ENOMEM;
-+			}
-+
-+			strncpy(tmp_path, pTcon->treeName, MAX_TREE_SIZE);
-+			strncat(tmp_path, search_path, MAX_PATHCONF);
-+			rc = connect_to_dfs_path(xid, pTcon->ses,
-+						 /* treename + */ tmp_path,
-+						 cifs_sb->local_nls);
-+			kfree(tmp_path);
-+			/* BB fix up inode etc. */
-+		} else if (rc) {
-+			if(buf)
-+				kfree(buf);
-+			return rc;
-+		}
-+	} else {
-+		struct cifsInodeInfo *cifsInfo;
-+
-+		/* get new inode */
-+		if (*pinode == NULL) {
-+			*pinode = get_cifs_inode(sb);
-+		}
-+		if(*pinode == NULL)
-+			return -ENOMEM;
-+		inode = *pinode;
-+		cifsInfo = CIFS_I(inode);
-+		pfindData->Attributes = le32_to_cpu(pfindData->Attributes);
-+		cifsInfo->cifsAttrs = pfindData->Attributes;
-+		cFYI(1, (" Old time %ld ", cifsInfo->time));
-+		cifsInfo->time = jiffies;
-+		cFYI(1, (" New time %ld ", cifsInfo->time));
-+
-+/* blksize needs to be multiple of two. So safer to default to blksize
-+        and blkbits set in superblock so 2**blkbits and blksize will match */
-+/*		inode->i_blksize =
-+		    (pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
-+
-+		/* Linux can not store file creation time unfortunately so we ignore it */
-+		inode->i_atime =
-+		    cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastAccessTime));
-+		inode->i_mtime =
-+		    cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastWriteTime));
-+		inode->i_ctime =
-+		    cifs_NTtimeToUnix(le64_to_cpu(pfindData->ChangeTime));
-+		cFYI(0,
-+		     (" Attributes came in as 0x%x ", pfindData->Attributes));
-+
-+		/* set default mode. will override for dirs below */
-+		if(atomic_read(&cifsInfo->inUse) == 0)
-+			/* new inode, can safely set these fields */
-+			inode->i_mode = cifs_sb->mnt_file_mode;
-+
-+		if (pfindData->Attributes & ATTR_REPARSE) {
-+	/* Can IFLNK be set as it basically is on windows with IFREG or IFDIR? */
-+			inode->i_mode |= S_IFLNK;
-+		} else if (pfindData->Attributes & ATTR_DIRECTORY) {
-+	/* override default perms since we do not do byte range locking on dirs */
-+			inode->i_mode = cifs_sb->mnt_dir_mode;
-+			inode->i_mode |= S_IFDIR;
-+		} else {
-+			inode->i_mode |= S_IFREG;
-+			/* treat the dos attribute of read-only as read-only mode e.g. 555 */
-+			if(cifsInfo->cifsAttrs & ATTR_READONLY)
-+				inode->i_mode &= ~(S_IWUGO);
-+   /* BB add code here - validate if device or weird share or device type? */
-+		}
-+		if(is_size_safe_to_change(cifsInfo)) {
-+		/* can not safely change the file size here if the
-+		client is writing to it due to potential races */
-+			inode->i_size = le64_to_cpu(pfindData->EndOfFile);
-+
-+		/* 512 bytes (2**9) is the fake blocksize that must be used */
-+		/* for this calculation */
-+			inode->i_blocks = (512 - 1 + pfindData->AllocationSize)
-+				 >> 9;
-+		}
-+                pfindData->AllocationSize = le64_to_cpu(pfindData->AllocationSize);
-+
-+		cFYI(1,
-+		     (" Size %ld and blocks %ld ",
-+		      (unsigned long) inode->i_size, inode->i_blocks));
-+		inode->i_nlink = le32_to_cpu(pfindData->NumberOfLinks);
-+
-+		/* BB fill in uid and gid here? with help from winbind? 
-+			or retrieve from NTFS stream extended attribute */
-+		if(atomic_read(&cifsInfo->inUse) == 0) {
-+			inode->i_uid = cifs_sb->mnt_uid;
-+			inode->i_gid = cifs_sb->mnt_gid;
-+			/* set so we do not keep refreshing these fields with
-+			bad data after user has changed them in memory */
-+			atomic_set(&cifsInfo->inUse,1);
-+		}
-+		
-+		if (S_ISREG(inode->i_mode)) {
-+			cFYI(1, (" File inode "));
-+			inode->i_op = &cifs_file_inode_ops;
-+			inode->i_fop = &cifs_file_ops;
-+			inode->i_data.a_ops = &cifs_addr_ops;
-+		} else if (S_ISDIR(inode->i_mode)) {
-+			cFYI(1, (" Directory inode "));
-+			inode->i_op = &cifs_dir_inode_ops;
-+			inode->i_fop = &cifs_dir_ops;
-+		} else if (S_ISLNK(inode->i_mode)) {
-+			cFYI(1, (" Symbolic Link inode "));
-+			inode->i_op = &cifs_symlink_inode_ops;
-+		} else {
-+			init_special_inode(inode, inode->i_mode,
-+					   kdev_t_to_nr(inode->i_rdev));
-+		}
-+	}
-+	if(buf)
-+	    kfree(buf);
-+	return rc;
-+}
-+
-+void
-+cifs_read_inode(struct inode *inode)
-+{				/* gets root inode */
-+	int xid;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsInodeInfo *cifs_inode;
-+	
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	xid = GetXid();
-+	
-+	cifs_inode = CIFS_I(inode);
-+	cifs_inode->cifsAttrs = ATTR_DIRECTORY; 
-+	atomic_set(&cifs_inode->inUse, 0);
-+	cifs_inode->time = 0;
-+	inode->i_blksize = CIFS_MAX_MSGSIZE;
-+	inode->i_blkbits = 14;  /* 2**14 = CIFS_MAX_MSGSIZE */
-+
-+	INIT_LIST_HEAD(&cifs_inode->openFileList);
-+
-+	if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)
-+		cifs_get_inode_info_unix(&inode, "", inode->i_sb,xid);
-+	else
-+		cifs_get_inode_info(&inode, "", NULL, inode->i_sb,xid);
-+	/* can not call macro FreeXid here since in a void func */
-+	_FreeXid(xid);
-+}
-+
-+int
-+cifs_unlink(struct inode *inode, struct dentry *direntry)
-+{
-+	int rc = 0;
-+	int xid;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	char *full_path = NULL;
-+	struct cifsInodeInfo *cifsInode;
-+	FILE_BASIC_INFO * pinfo_buf;
-+
-+	cFYI(1, (" cifs_unlink, inode = 0x%p with ", inode));
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+/* Unlink can be called from rename so we can not grab
-+	the sem here since we deadlock otherwise */
-+/*	down(&direntry->d_sb->s_vfs_rename_sem);*/
-+	full_path = build_path_from_dentry(direntry);
-+/*	up(&direntry->d_sb->s_vfs_rename_sem);*/
-+	if(full_path == NULL) {
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+	rc = CIFSSMBDelFile(xid, pTcon, full_path, cifs_sb->local_nls);
-+
-+	if (!rc) {
-+		direntry->d_inode->i_nlink--;
-+	} else if (rc == -ENOENT) {
-+		d_drop(direntry);
-+	} else if (rc == -ETXTBSY) {
-+		int oplock = FALSE;
-+		__u16 netfid;
-+
-+		rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, DELETE, 
-+				CREATE_NOT_DIR | CREATE_DELETE_ON_CLOSE,
-+				&netfid, &oplock, NULL, cifs_sb->local_nls);
-+		if(rc==0) {
-+			CIFSSMBRenameOpenFile(xid,pTcon,netfid,
-+				NULL, cifs_sb->local_nls);
-+			CIFSSMBClose(xid, pTcon, netfid);
-+			direntry->d_inode->i_nlink--;
-+		}
-+	} else if (rc == -EACCES) {
-+		/* try only if r/o attribute set in local lookup data? */
-+		pinfo_buf = (FILE_BASIC_INFO *)kmalloc(sizeof(FILE_BASIC_INFO),GFP_KERNEL);
-+		if(pinfo_buf) {
-+			memset(pinfo_buf,0,sizeof(FILE_BASIC_INFO));        
-+		/* ATTRS set to normal clears r/o bit */
-+			pinfo_buf->Attributes = cpu_to_le32(ATTR_NORMAL);
-+			rc = CIFSSMBSetTimes(xid, pTcon, full_path, pinfo_buf,
-+				cifs_sb->local_nls);
-+			kfree(pinfo_buf);
-+		}
-+		if(rc==0) {
-+			rc = CIFSSMBDelFile(xid, pTcon, full_path, cifs_sb->local_nls);
-+			if (!rc) {
-+				direntry->d_inode->i_nlink--;
-+			} else if (rc == -ETXTBSY) {
-+				int oplock = FALSE;
-+				__u16 netfid;
-+
-+				rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, DELETE,
-+						CREATE_NOT_DIR | CREATE_DELETE_ON_CLOSE,
-+						&netfid, &oplock, NULL, cifs_sb->local_nls);
-+				if(rc==0) {
-+					CIFSSMBRenameOpenFile(xid,pTcon,netfid,NULL,cifs_sb->local_nls);
-+					CIFSSMBClose(xid, pTcon, netfid);
-+		                        direntry->d_inode->i_nlink--;
-+				}
-+			/* BB if rc = -ETXTBUSY goto the rename logic BB */
-+			}
-+		}
-+	}
-+	cifsInode = CIFS_I(direntry->d_inode);
-+	cifsInode->time = 0;	/* will force revalidate to get info when needed */
-+	direntry->d_inode->i_ctime = inode->i_ctime = inode->i_mtime =
-+	    CURRENT_TIME;
-+	cifsInode = CIFS_I(inode);
-+	cifsInode->time = 0;	/* force revalidate of dir as well */
-+
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int
-+cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode)
-+{
-+	int rc = 0;
-+	int xid;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	char *full_path = NULL;
-+	struct inode *newinode = NULL;
-+
-+	cFYI(1, ("In cifs_mkdir, mode = 0x%x inode = 0x%p ", mode, inode));
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	down(&inode->i_sb->s_vfs_rename_sem);
-+	full_path = build_path_from_dentry(direntry);
-+	up(&inode->i_sb->s_vfs_rename_sem);
-+	if(full_path == NULL) {
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+	/* BB add setting the equivalent of mode via CreateX w/ACLs */
-+	rc = CIFSSMBMkDir(xid, pTcon, full_path, cifs_sb->local_nls);
-+	if (rc) {
-+		cFYI(1, ("cifs_mkdir returned 0x%x ", rc));
-+		d_drop(direntry);
-+	} else {
-+		inode->i_nlink++;
-+		if (pTcon->ses->capabilities & CAP_UNIX)
-+			rc = cifs_get_inode_info_unix(&newinode, full_path,
-+						      inode->i_sb,xid);
-+		else
-+			rc = cifs_get_inode_info(&newinode, full_path,NULL,
-+						 inode->i_sb,xid);
-+
-+		direntry->d_op = &cifs_dentry_ops;
-+		d_instantiate(direntry, newinode);
-+		if(direntry->d_inode)
-+			direntry->d_inode->i_nlink = 2;
-+		if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)                
-+			CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode,
-+				(__u64)-1,  
-+				(__u64)-1,
-+				0 /* dev_t */,
-+				cifs_sb->local_nls);
-+		else { /* BB to be implemented via Windows secrty descriptors*/
-+		/* eg CIFSSMBWinSetPerms(xid,pTcon,full_path,mode,-1,-1,local_nls);*/
-+		}
-+	}
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+
-+	return rc;
-+}
-+
-+int
-+cifs_rmdir(struct inode *inode, struct dentry *direntry)
-+{
-+	int rc = 0;
-+	int xid;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	char *full_path = NULL;
-+	struct cifsInodeInfo *cifsInode;
-+
-+	cFYI(1, (" cifs_rmdir, inode = 0x%p with ", inode));
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	down(&inode->i_sb->s_vfs_rename_sem);
-+	full_path = build_path_from_dentry(direntry);
-+	up(&inode->i_sb->s_vfs_rename_sem);
-+	if(full_path == NULL) {
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+
-+	rc = CIFSSMBRmDir(xid, pTcon, full_path, cifs_sb->local_nls);
-+
-+	if (!rc) {
-+		inode->i_nlink--;
-+		direntry->d_inode->i_size = 0;
-+		direntry->d_inode->i_nlink = 0;
-+	}
-+
-+	cifsInode = CIFS_I(direntry->d_inode);
-+	cifsInode->time = 0;	/* force revalidate to go get info when needed */
-+	direntry->d_inode->i_ctime = inode->i_ctime = inode->i_mtime =
-+	    CURRENT_TIME;
-+
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int
-+cifs_rename(struct inode *source_inode, struct dentry *source_direntry,
-+	    struct inode *target_inode, struct dentry *target_direntry)
-+{
-+	char *fromName;
-+	char *toName;
-+	struct cifs_sb_info *cifs_sb_source;
-+	struct cifs_sb_info *cifs_sb_target;
-+	struct cifsTconInfo *pTcon;
-+	int xid;
-+	int rc = 0;
-+
-+	xid = GetXid();
-+
-+	cifs_sb_target = CIFS_SB(target_inode->i_sb);
-+	cifs_sb_source = CIFS_SB(source_inode->i_sb);
-+	pTcon = cifs_sb_source->tcon;
-+
-+	if (pTcon != cifs_sb_target->tcon) {
-+		FreeXid(xid);    
-+		return -EXDEV;	/* BB actually could be allowed if same server, but
-+                     different share. Might eventually add support for this */
-+	}
-+
-+	/* we already  have the rename sem so we do not need
-+	to grab it again here to protect the path integrity */
-+	fromName = build_path_from_dentry(source_direntry);
-+	toName = build_path_from_dentry(target_direntry);
-+	if((fromName == NULL) || (toName == NULL)) {
-+		rc = -ENOMEM;
-+		goto cifs_rename_exit;
-+	}
-+
-+	rc = CIFSSMBRename(xid, pTcon, fromName, toName,
-+			   cifs_sb_source->local_nls);
-+	if(rc == -EEXIST) {
-+		/* check if they are the same file 
-+		because rename of hardlinked files is a noop */
-+		FILE_UNIX_BASIC_INFO * info_buf_source;
-+		FILE_UNIX_BASIC_INFO * info_buf_target;
-+
-+		info_buf_source = 
-+			kmalloc(2 * sizeof(FILE_UNIX_BASIC_INFO),GFP_KERNEL);
-+		if(info_buf_source != NULL) {
-+			info_buf_target = info_buf_source+1;
-+			rc = CIFSSMBUnixQPathInfo(xid, pTcon, fromName, 
-+				info_buf_source, cifs_sb_source->local_nls);
-+			if(rc == 0) {
-+				rc = CIFSSMBUnixQPathInfo(xid,pTcon,toName,
-+						info_buf_target,
-+						cifs_sb_target->local_nls);
-+			}
-+			if((rc == 0) && 
-+				(info_buf_source->UniqueId == 
-+				 info_buf_target->UniqueId)) {
-+			/* do not rename since the files are hardlinked 
-+			   which is a noop */
-+			} else {
-+			/* we either can not tell the files are hardlinked
-+			(as with Windows servers) or files are not hardlinked 
-+			so delete the target manually before renaming to
-+			follow POSIX rather than Windows semantics */
-+				cifs_unlink(target_inode, target_direntry);
-+				rc = CIFSSMBRename(xid, pTcon, fromName, toName,
-+					cifs_sb_source->local_nls);
-+			}
-+			kfree(info_buf_source);
-+		} /* if we can not get memory just leave rc as EEXIST */
-+	}
-+
-+	if((rc == -EIO)||(rc == -EEXIST)) {
-+		int oplock = FALSE;
-+		__u16 netfid;
-+
-+		rc = CIFSSMBOpen(xid, pTcon, fromName, FILE_OPEN, GENERIC_READ,
-+					CREATE_NOT_DIR,
-+					&netfid, &oplock, NULL, cifs_sb_source->local_nls);
-+		if(rc==0) {
-+			CIFSSMBRenameOpenFile(xid,pTcon,netfid,
-+					toName, cifs_sb_source->local_nls);
-+			CIFSSMBClose(xid, pTcon, netfid);
-+		}
-+	}
-+
-+cifs_rename_exit:
-+	if (fromName)
-+		kfree(fromName);
-+	if (toName)
-+		kfree(toName);
-+
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int
-+cifs_revalidate(struct dentry *direntry)
-+{
-+	int xid;
-+	int rc = 0;
-+	char *full_path;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsInodeInfo *cifsInode;
-+	loff_t local_size;
-+	time_t local_mtime;
-+	int invalidate_inode = FALSE;
-+
-+	if(direntry->d_inode == NULL)
-+		return -ENOENT;
-+
-+	cifsInode = CIFS_I(direntry->d_inode);
-+
-+	if(cifsInode == NULL)
-+		return -ENOENT;
-+
-+	/* no sense revalidating inode info on file that no one can write */
-+	if(CIFS_I(direntry->d_inode)->clientCanCacheRead)
-+		return rc;
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(direntry->d_sb);
-+
-+	/* can not safely grab the rename sem here if
-+	rename calls revalidate since that would deadlock */
-+	full_path = build_path_from_dentry(direntry);
-+	if(full_path == NULL) {
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+	cFYI(1,
-+	     ("Revalidate: %s inode 0x%p count %d dentry: 0x%p d_time %ld jiffies %ld",
-+	      full_path, direntry->d_inode,
-+	      direntry->d_inode->i_count.counter, direntry,
-+	      direntry->d_time, jiffies));
-+
-+	if (cifsInode->time == 0){
-+		/* was set to zero previously to force revalidate */
-+	} else if (time_before(jiffies, cifsInode->time + HZ) && lookupCacheEnabled) {
-+	    if((S_ISREG(direntry->d_inode->i_mode) == 0) || 
-+			(direntry->d_inode->i_nlink == 1)) {  
-+			if (full_path)
-+				kfree(full_path);
-+			FreeXid(xid);
-+			return rc;
-+		} else {
-+			cFYI(1,("Have to revalidate file due to hardlinks"));
-+		}            
-+	}
-+	
-+	/* save mtime and size */
-+	local_mtime = direntry->d_inode->i_mtime;
-+	local_size  = direntry->d_inode->i_size;
-+
-+	if (cifs_sb->tcon->ses->capabilities & CAP_UNIX) {
-+		rc = cifs_get_inode_info_unix(&direntry->d_inode, full_path,
-+					 direntry->d_sb,xid);
-+		if(rc) {
-+			cFYI(1,("error on getting revalidate info %d",rc));
-+/*			if(rc != -ENOENT)
-+				rc = 0; */ /* BB should we cache info on certain errors? */
-+		}
-+	} else {
-+		rc = cifs_get_inode_info(&direntry->d_inode, full_path, NULL,
-+				    direntry->d_sb,xid);
-+		if(rc) {
-+			cFYI(1,("error on getting revalidate info %d",rc));
-+/*			if(rc != -ENOENT)
-+				rc = 0; */  /* BB should we cache info on certain errors? */
-+		}
-+	}
-+	/* should we remap certain errors, access denied?, to zero */
-+
-+	/* if not oplocked, we invalidate inode pages if mtime 
-+	   or file size had changed on server */
-+
-+	if((local_mtime == direntry->d_inode->i_mtime) && 
-+		(local_size == direntry->d_inode->i_size)) {
-+		cFYI(1,("cifs_revalidate - inode unchanged"));
-+	} else {
-+		/* file may have changed on server */
-+		if(cifsInode->clientCanCacheRead) {
-+			/* no need to invalidate inode pages since we were
-+			   the only ones who could have modified the file and
-+			   the server copy is staler than ours */
-+		} else {
-+			invalidate_inode = TRUE;
-+		}
-+	}
-+
-+	/* can not grab this sem since kernel filesys locking
-+		documentation indicates i_sem may be taken by the kernel 
-+		on lookup and rename which could deadlock if we grab
-+		the i_sem here as well */
-+/*	down(&direntry->d_inode->i_sem);*/
-+	/* need to write out dirty pages here  */
-+	if(direntry->d_inode->i_mapping) {
-+		/* do we need to lock inode until after invalidate completes below? */
-+		filemap_fdatasync(direntry->d_inode->i_mapping);
-+	}
-+	if(invalidate_inode) {
-+		filemap_fdatawait(direntry->d_inode->i_mapping);
-+		/* may eventually have to do this for open files too */
-+		if(list_empty(&(cifsInode->openFileList))) {
-+			/* Has changed on server - flush read ahead pages */
-+			cFYI(1,("Invalidating read ahead data on closed file"));
-+			invalidate_inode_pages(direntry->d_inode);
-+		}
-+	}
-+/*	up(&direntry->d_inode->i_sem);*/
-+	
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+
-+	return rc;
-+}
-+
-+/* int cifs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
-+{
-+	int err = cifs_revalidate(dentry);
-+	if (!err)
-+		generic_fillattr(dentry->d_inode, stat);
-+	return err;
-+} */
-+
-+void
-+cifs_truncate_file(struct inode *inode)
-+{				/* BB remove - may not need this function after all BB */
-+	int xid;
-+	int rc = -EIO;
-+	int found = FALSE;
-+	struct cifsFileInfo *open_file = NULL;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	struct cifsInodeInfo *cifsInode;
-+	struct dentry *dirent;
-+	struct list_head * tmp;
-+	char *full_path = NULL;   
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	/* To avoid spurious oplock breaks from server, in the case
-+		of inodes that we already have open, avoid doing path
-+		based setting of file size if we can do it by handle.
-+		This keeps our caching token (oplock) and avoids
-+		timeouts when the local oplock break takes longer to flush
-+		writebehind data than the SMB timeout for the SetPathInfo 
-+		request would allow */
-+	read_lock(&GlobalSMBSeslock); 
-+	cifsInode = CIFS_I(inode);
-+	list_for_each(tmp, &cifsInode->openFileList) {            
-+		open_file = list_entry(tmp,struct cifsFileInfo, flist);
-+		/* We check if file is open for writing first */
-+		if((open_file->pfile) && (!open_file->invalidHandle) &&
-+		   ((open_file->pfile->f_flags & O_RDWR) || 
-+			(open_file->pfile->f_flags & O_WRONLY))) {
-+			read_unlock(&GlobalSMBSeslock);
-+			found = TRUE;
-+			rc = CIFSSMBSetFileSize(xid, pTcon, inode->i_size,
-+			   open_file->netfid,open_file->pid,FALSE);
-+			if(rc == 0) {
-+				FreeXid(xid);
-+				return;
-+			} 
-+			/* Do not need reopen and retry on EAGAIN since we will
-+				retry by pathname below */
-+			if(rc == -EAGAIN)
-+				rc = -EHOSTDOWN;
-+
-+			break;  /* now that we found one valid file handle no
-+				sense continuing to loop trying others */
-+		}
-+	}
-+	if(found == FALSE)
-+		read_unlock(&GlobalSMBSeslock);
-+
-+	if (list_empty(&inode->i_dentry)) {
-+		cERROR(1,
-+		       ("Can not get pathname from empty dentry in inode 0x%p ",
-+			inode));
-+		FreeXid(xid);
-+		return;
-+	}
-+
-+	dirent = list_entry(inode->i_dentry.next, struct dentry, d_alias);
-+	if (dirent) {
-+		full_path = build_path_from_dentry(dirent);
-+		rc = CIFSSMBSetEOF(xid, pTcon, full_path, inode->i_size,FALSE,
-+				   cifs_sb->local_nls);
-+		cFYI(1,(" SetEOF (truncate) rc = %d",rc));
-+		if (!rc)
-+			CIFSSMBSetEOF(xid,pTcon,full_path,inode->i_size,TRUE,cifs_sb->local_nls);
-+           /* allocation size setting seems optional so ignore return code */
-+	}
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+	return;
-+}
-+
-+static int cifs_truncate_page(struct address_space *mapping, loff_t from)
-+{
-+	unsigned long index = from >> PAGE_CACHE_SHIFT;
-+	unsigned offset = from & (PAGE_CACHE_SIZE-1);
-+	struct page *page;
-+	char *kaddr;
-+	int rc = 0;
-+
-+	page = grab_cache_page(mapping, index);
-+	if (!page)
-+		return -ENOMEM;
-+
-+	kaddr = kmap_atomic(page, KM_USER0);
-+	memset(kaddr + offset, 0, PAGE_CACHE_SIZE - offset);
-+	flush_dcache_page(page);
-+	kunmap_atomic(kaddr, KM_USER0);
-+	unlock_page(page);
-+	page_cache_release(page);
-+	return rc;
-+}
-+
-+int
-+cifs_setattr(struct dentry *direntry, struct iattr *attrs)
-+{
-+	int xid;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	char *full_path = NULL;
-+	int rc = -EACCES;
-+	int found = FALSE;
-+	struct cifsFileInfo *open_file = NULL;
-+	FILE_BASIC_INFO time_buf;
-+	int set_time = FALSE;
-+	__u64 mode = 0xFFFFFFFFFFFFFFFFULL;
-+	__u64 uid = 0xFFFFFFFFFFFFFFFFULL;
-+	__u64 gid = 0xFFFFFFFFFFFFFFFFULL;
-+	struct cifsInodeInfo *cifsInode;
-+	struct list_head * tmp;
-+
-+	xid = GetXid();
-+
-+	cFYI(1,
-+	     (" In cifs_setattr, name = %s attrs->iavalid 0x%x ",
-+	      direntry->d_name.name, attrs->ia_valid));
-+	cifs_sb = CIFS_SB(direntry->d_inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	down(&direntry->d_sb->s_vfs_rename_sem);
-+	full_path = build_path_from_dentry(direntry);
-+	up(&direntry->d_sb->s_vfs_rename_sem);
-+	if(full_path == NULL) {
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+	cifsInode = CIFS_I(direntry->d_inode);
-+
-+	/* BB check if we need to refresh inode from server now ? BB */
-+
-+	/* need to flush data before changing file size on server */
-+	filemap_fdatasync(direntry->d_inode->i_mapping);
-+
-+	if (attrs->ia_valid & ATTR_SIZE) {
-+		read_lock(&GlobalSMBSeslock); 
-+		/* To avoid spurious oplock breaks from server, in the case
-+			of inodes that we already have open, avoid doing path
-+			based setting of file size if we can do it by handle.
-+			This keeps our caching token (oplock) and avoids
-+			timeouts when the local oplock break takes longer to flush
-+			writebehind data than the SMB timeout for the SetPathInfo 
-+			request would allow */
-+		list_for_each(tmp, &cifsInode->openFileList) {            
-+			open_file = list_entry(tmp,struct cifsFileInfo, flist);
-+			/* We check if file is open for writing first */
-+			if((open_file->pfile) &&
-+				((open_file->pfile->f_flags & O_RDWR) || 
-+				 (open_file->pfile->f_flags & O_WRONLY))) {
-+				if(open_file->invalidHandle == FALSE) {
-+					/* we found a valid, writeable network file 
-+					handle to use to try to set the file size */
-+					__u16 nfid = open_file->netfid;
-+					__u32 npid = open_file->pid;
-+					read_unlock(&GlobalSMBSeslock);
-+					found = TRUE;
-+					rc = CIFSSMBSetFileSize(xid, pTcon, attrs->ia_size,
-+					   nfid,npid,FALSE);
-+					cFYI(1,("SetFileSize by handle (setattrs) rc = %d",rc));
-+				/* Do not need reopen and retry on EAGAIN since we will
-+					retry by pathname below */
-+
-+					break;  /* now that we found one valid file handle no
-+						sense continuing to loop trying others */
-+				}
-+			}
-+		}
-+		if(found == FALSE) {
-+			read_unlock(&GlobalSMBSeslock);
-+		}
-+
-+
-+		if(rc != 0) {
-+			/* Set file size by pathname rather than by handle either
-+			because no valid, writeable file handle for it was found or
-+			because there was an error setting it by handle */
-+			rc = CIFSSMBSetEOF(xid, pTcon, full_path, attrs->ia_size,FALSE,
-+				   cifs_sb->local_nls);
-+			cFYI(1,(" SetEOF by path (setattrs) rc = %d",rc));
-+		}
-+        
-+	/*  Server is ok setting allocation size implicitly - no need to call: */
-+	/*CIFSSMBSetEOF(xid, pTcon, full_path, attrs->ia_size, TRUE, cifs_sb->local_nls);*/
-+
-+		if (rc == 0) {
-+			rc = vmtruncate(direntry->d_inode, attrs->ia_size);
-+			cifs_truncate_page(direntry->d_inode->i_mapping, direntry->d_inode->i_size);
-+		}
-+	}
-+	if (attrs->ia_valid & ATTR_UID) {
-+		cFYI(1, (" CIFS - UID changed to %d", attrs->ia_uid));
-+		uid = attrs->ia_uid;
-+		/*        entry->uid = cpu_to_le16(attr->ia_uid); */
-+	}
-+	if (attrs->ia_valid & ATTR_GID) {
-+		cFYI(1, (" CIFS - GID changed to %d", attrs->ia_gid));
-+		gid = attrs->ia_gid;
-+		/*      entry->gid = cpu_to_le16(attr->ia_gid); */
-+	}
-+
-+	time_buf.Attributes = 0;
-+	if (attrs->ia_valid & ATTR_MODE) {
-+		cFYI(1, (" CIFS - Mode changed to 0x%x", attrs->ia_mode));
-+		mode = attrs->ia_mode;
-+		/* entry->mode = cpu_to_le16(attr->ia_mode); */
-+	}
-+
-+	if ((cifs_sb->tcon->ses->capabilities & CAP_UNIX)
-+	    && (attrs->ia_valid & (ATTR_MODE | ATTR_GID | ATTR_UID)))
-+		rc = CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode, uid, gid,
-+				0 /* dev_t */, cifs_sb->local_nls);
-+	else if (attrs->ia_valid & ATTR_MODE) {
-+		if((mode & S_IWUGO) == 0) /* not writeable */ {
-+			if((cifsInode->cifsAttrs & ATTR_READONLY) == 0)
-+				time_buf.Attributes = 
-+					cpu_to_le32(cifsInode->cifsAttrs | ATTR_READONLY);
-+		} else if((mode & S_IWUGO) == S_IWUGO) {
-+			if(cifsInode->cifsAttrs & ATTR_READONLY)
-+				time_buf.Attributes = 
-+					cpu_to_le32(cifsInode->cifsAttrs & (~ATTR_READONLY));
-+		}
-+		/* BB to be implemented - via Windows security descriptors or streams */
-+		/* CIFSSMBWinSetPerms(xid,pTcon,full_path,mode,uid,gid,cifs_sb->local_nls);*/
-+	}
-+
-+	if (attrs->ia_valid & ATTR_ATIME) {
-+		set_time = TRUE;
-+		time_buf.LastAccessTime =
-+		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_atime));
-+	} else
-+		time_buf.LastAccessTime = 0;
-+
-+	if (attrs->ia_valid & ATTR_MTIME) {
-+		set_time = TRUE;
-+		time_buf.LastWriteTime =
-+		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_mtime));
-+	} else
-+		time_buf.LastWriteTime = 0;
-+
-+	if (attrs->ia_valid & ATTR_CTIME) {
-+		set_time = TRUE;
-+		time_buf.ChangeTime =
-+		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_ctime));
-+	} else
-+		time_buf.ChangeTime = 0;
-+
-+	if (set_time | time_buf.Attributes) {
-+		/* BB what if setting one attribute fails  
-+			(such as size) but time setting works */
-+		time_buf.CreationTime = 0;	/* do not change */
-+		/* In the future we should experiment - try setting timestamps
-+			 via Handle (SetFileInfo) instead of by path */
-+		rc = CIFSSMBSetTimes(xid, pTcon, full_path, &time_buf,
-+				cifs_sb->local_nls);
-+	}
-+
-+	/* do not  need local check to inode_check_ok since the server does that */
-+	if (!rc)
-+		rc = inode_setattr(direntry->d_inode, attrs);
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+void
-+cifs_delete_inode(struct inode *inode)
-+{
-+	cFYI(1, ("In cifs_delete_inode, inode = 0x%p ", inode));
-+	/* may have to add back in if and when safe distributed caching of
-+		directories added e.g. via FindNotify */
-+}
-diff -urN linux-2.4.29.old/fs/cifs/link.c linux-2.4.29/fs/cifs/link.c
---- linux-2.4.29.old/fs/cifs/link.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/link.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,328 @@
-+/*
-+ *   fs/cifs/link.c
-+ *
-+ *   Copyright (C) International Business Machines  Corp., 2002,2003
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/fs.h>
-+#include <linux/stat.h>
-+#include "cifsfs.h"
-+#include "cifspdu.h"
-+#include "cifsglob.h"
-+#include "cifsproto.h"
-+#include "cifs_debug.h"
-+#include "cifs_fs_sb.h"
-+
-+int
-+cifs_hardlink(struct dentry *old_file, struct inode *inode,
-+	      struct dentry *direntry)
-+{
-+	int rc = -EACCES;
-+	int xid;
-+	char *fromName = NULL;
-+	char *toName = NULL;
-+	struct cifs_sb_info *cifs_sb_target;
-+	struct cifsTconInfo *pTcon;
-+	struct cifsInodeInfo *cifsInode;
-+
-+	xid = GetXid();
-+
-+	cifs_sb_target = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb_target->tcon;
-+
-+/* No need to check for cross device links since server will do that
-+   BB note DFS case in future though (when we may have to check) */
-+
-+	down(&inode->i_sb->s_vfs_rename_sem);
-+	fromName = build_path_from_dentry(old_file);
-+	toName = build_path_from_dentry(direntry);
-+	up(&inode->i_sb->s_vfs_rename_sem);
-+	if((fromName == NULL) || (toName == NULL)) {
-+		rc = -ENOMEM;
-+		goto cifs_hl_exit;
-+	}
-+
-+	if (cifs_sb_target->tcon->ses->capabilities & CAP_UNIX)
-+		rc = CIFSUnixCreateHardLink(xid, pTcon, fromName, toName,
-+					    cifs_sb_target->local_nls);
-+	else {
-+		rc = CIFSCreateHardLink(xid, pTcon, fromName, toName,
-+					cifs_sb_target->local_nls);
-+		if(rc == -EIO)
-+			rc = -EOPNOTSUPP;  
-+	}
-+
-+/* if (!rc)     */
-+	{
-+		/*   renew_parental_timestamps(old_file);
-+		   inode->i_nlink++;
-+		   mark_inode_dirty(inode);
-+		   d_instantiate(direntry, inode); */
-+		/* BB add call to either mark inode dirty or refresh its data and timestamp to current time */
-+	}
-+	d_drop(direntry);	/* force new lookup from server */
-+	cifsInode = CIFS_I(old_file->d_inode);
-+	cifsInode->time = 0;	/* will force revalidate to go get info when needed */
-+
-+cifs_hl_exit:
-+	if (fromName)
-+		kfree(fromName);
-+	if (toName)
-+		kfree(toName);
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int
-+cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
-+{
-+	struct inode *inode = direntry->d_inode;
-+	int rc = -EACCES;
-+	int xid;
-+	char *full_path = NULL;
-+	char * target_path;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+
-+	xid = GetXid();
-+
-+	down(&direntry->d_sb->s_vfs_rename_sem);
-+	full_path = build_path_from_dentry(direntry);
-+	up(&direntry->d_sb->s_vfs_rename_sem);
-+
-+	if(full_path == NULL) {
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+	cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode));
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+	target_path = kmalloc(PATH_MAX, GFP_KERNEL);
-+	if(target_path == NULL) {
-+		if (full_path)
-+			kfree(full_path);
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+	/* can not call the following line due to EFAULT in vfs_readlink which is presumably expecting a user space buffer */
-+	/* length = cifs_readlink(direntry,target_path, sizeof(target_path) - 1);    */
-+
-+/* BB add read reparse point symlink code and Unix extensions symlink code here BB */
-+	if (pTcon->ses->capabilities & CAP_UNIX)
-+		rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
-+					     target_path,
-+					     PATH_MAX-1,
-+					     cifs_sb->local_nls);
-+	else {
-+		/* rc = CIFSSMBQueryReparseLinkInfo */
-+		/* BB Add code to Query ReparsePoint info */
-+	}
-+	/* BB Anything else to do to handle recursive links? */
-+	/* BB Should we be using page symlink ops here? */
-+
-+	if (rc == 0) {
-+
-+/* BB Add special case check for Samba DFS symlinks */
-+
-+		target_path[PATH_MAX-1] = 0;
-+		rc = vfs_follow_link(nd, target_path);
-+	}
-+	/* else EACCESS */
-+
-+	if (target_path)
-+		kfree(target_path);
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int
-+cifs_symlink(struct inode *inode, struct dentry *direntry, const char *symname)
-+{
-+	int rc = -EOPNOTSUPP;
-+	int xid;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	char *full_path = NULL;
-+	struct inode *newinode = NULL;
-+
-+	xid = GetXid();
-+
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+	down(&inode->i_sb->s_vfs_rename_sem);
-+	full_path = build_path_from_dentry(direntry);
-+	up(&inode->i_sb->s_vfs_rename_sem);
-+
-+	if(full_path == NULL) {
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+
-+	cFYI(1, ("Full path: %s ", full_path));
-+	cFYI(1, ("symname is %s", symname));
-+
-+	/* BB what if DFS and this volume is on different share? BB */
-+	if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)
-+		rc = CIFSUnixCreateSymLink(xid, pTcon, full_path, symname,
-+					   cifs_sb->local_nls);
-+	/* else
-+	   rc = CIFSCreateReparseSymLink(xid, pTcon, fromName, toName,cifs_sb_target->local_nls); */
-+
-+	if (rc == 0) {
-+		if (pTcon->ses->capabilities & CAP_UNIX)
-+			rc = cifs_get_inode_info_unix(&newinode, full_path,
-+						      inode->i_sb,xid);
-+		else
-+			rc = cifs_get_inode_info(&newinode, full_path, NULL,
-+						 inode->i_sb,xid);
-+
-+		if (rc != 0) {
-+			cFYI(1,
-+			     ("Create symlink worked but get_inode_info failed with rc = %d ",
-+			      rc));
-+		} else {
-+			direntry->d_op = &cifs_dentry_ops;
-+			d_instantiate(direntry, newinode);
-+		}
-+	}
-+
-+	if (full_path)
-+		kfree(full_path);
-+	FreeXid(xid);
-+	return rc;
-+}
-+
-+int
-+cifs_readlink(struct dentry *direntry, char *pBuffer, int buflen)
-+{
-+	struct inode *inode = direntry->d_inode;
-+	int rc = -EACCES;
-+	int xid;
-+	int oplock = FALSE;
-+	struct cifs_sb_info *cifs_sb;
-+	struct cifsTconInfo *pTcon;
-+	char *full_path = NULL;
-+	char *tmp_path =  NULL;
-+	char * tmpbuffer;
-+	unsigned char * referrals = NULL;
-+	int num_referrals = 0;
-+	int len;
-+	__u16 fid;
-+
-+	xid = GetXid();
-+	cifs_sb = CIFS_SB(inode->i_sb);
-+	pTcon = cifs_sb->tcon;
-+
-+/* BB would it be safe against deadlock to grab this sem 
-+      even though rename itself grabs the sem and calls lookup? */
-+/*       down(&inode->i_sb->s_vfs_rename_sem);*/
-+	full_path = build_path_from_dentry(direntry);
-+/*       up(&inode->i_sb->s_vfs_rename_sem);*/
-+
-+	if(full_path == NULL) {
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+
-+	cFYI(1,
-+	     ("Full path: %s inode = 0x%p pBuffer = 0x%p buflen = %d",
-+	      full_path, inode, pBuffer, buflen));
-+	if(buflen > PATH_MAX)
-+		len = PATH_MAX;
-+	else
-+		len = buflen;
-+	tmpbuffer = kmalloc(len,GFP_KERNEL);   
-+	if(tmpbuffer == NULL) {
-+		if (full_path)
-+			kfree(full_path);
-+		FreeXid(xid);
-+		return -ENOMEM;
-+	}
-+
-+/* BB add read reparse point symlink code and Unix extensions symlink code here BB */
-+	if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)
-+		rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
-+				tmpbuffer,
-+				len - 1,
-+				cifs_sb->local_nls);
-+	else {
-+		rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, GENERIC_READ,
-+				OPEN_REPARSE_POINT,&fid, &oplock, NULL, cifs_sb->local_nls);
-+		if(!rc) {
-+			rc = CIFSSMBQueryReparseLinkInfo(xid, pTcon, full_path,
-+				tmpbuffer,
-+				len - 1, 
-+				fid,
-+				cifs_sb->local_nls);
-+			if(CIFSSMBClose(xid, pTcon, fid)) {
-+				cFYI(1,("Error closing junction point (open for ioctl)"));
-+			}
-+			if(rc == -EIO) {
-+				/* Query if DFS Junction */
-+				tmp_path =
-+					kmalloc(MAX_TREE_SIZE + MAX_PATHCONF + 1,
-+						GFP_KERNEL);
-+				if (tmp_path) {
-+					strncpy(tmp_path, pTcon->treeName, MAX_TREE_SIZE);
-+					strncat(tmp_path, full_path, MAX_PATHCONF);
-+					rc = get_dfs_path(xid, pTcon->ses, tmp_path,
-+						cifs_sb->local_nls, &num_referrals, &referrals);
-+					cFYI(1,("Get DFS for %s rc = %d ",tmp_path, rc));
-+					if((num_referrals == 0) && (rc == 0))
-+						rc = -EACCES;
-+					else {
-+						cFYI(1,("num referral: %d",num_referrals));
-+						if(referrals) {
-+							cFYI(1,("referral string: %s ",referrals));
-+							strncpy(tmpbuffer, referrals, len-1);                            
-+						}
-+					}
-+					if(referrals)
-+						kfree(referrals);
-+					kfree(tmp_path);
-+					if(referrals) {
-+						kfree(referrals);
-+					}
-+				}
-+				/* BB add code like else decode referrals then memcpy to
-+				  tmpbuffer and free referrals string array BB */
-+			}
-+		}
-+	}
-+	/* BB Anything else to do to handle recursive links? */
-+	/* BB Should we be using page ops here? */
-+
-+	/* BB null terminate returned string in pBuffer? BB */
-+	if (rc == 0) {
-+		rc = vfs_readlink(direntry, pBuffer, len, tmpbuffer);
-+		cFYI(1,
-+		     ("vfs_readlink called from cifs_readlink returned %d",
-+		      rc));
-+	}
-+
-+	if (tmpbuffer) {
-+		kfree(tmpbuffer);
-+	}
-+	if (full_path) {
-+		kfree(full_path);
-+	}
-+	FreeXid(xid);
-+	return rc;
-+}
-diff -urN linux-2.4.29.old/fs/cifs/Makefile linux-2.4.29/fs/cifs/Makefile
---- linux-2.4.29.old/fs/cifs/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/Makefile	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,10 @@
-+#
-+# Makefile for Linux CIFS VFS client 
-+#
-+O_TARGET := cifs.o
-+
-+obj-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o md4.o md5.o cifs_unicode.o nterr.o cifsencrypt.o
-+
-+obj-m := $(O_TARGET)
-+
-+include $(TOPDIR)/Rules.make
-diff -urN linux-2.4.29.old/fs/cifs/md4.c linux-2.4.29/fs/cifs/md4.c
---- linux-2.4.29.old/fs/cifs/md4.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/md4.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,203 @@
-+/* 
-+   Unix SMB/Netbios implementation.
-+   Version 1.9.
-+   a implementation of MD4 designed for use in the SMB authentication protocol
-+   Copyright (C) Andrew Tridgell 1997-1998.
-+   Modified by Steve French (sfrench@us.ibm.com) 2002-2003
-+   
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+   
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+   
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+*/
-+#include <linux/module.h>
-+#include <linux/fs.h>
-+/* NOTE: This code makes no attempt to be fast! */
-+
-+static __u32
-+F(__u32 X, __u32 Y, __u32 Z)
-+{
-+	return (X & Y) | ((~X) & Z);
-+}
-+
-+static __u32
-+G(__u32 X, __u32 Y, __u32 Z)
-+{
-+	return (X & Y) | (X & Z) | (Y & Z);
-+}
-+
-+static __u32
-+H(__u32 X, __u32 Y, __u32 Z)
-+{
-+	return X ^ Y ^ Z;
-+}
-+
-+static __u32
-+lshift(__u32 x, int s)
-+{
-+	x &= 0xFFFFFFFF;
-+	return ((x << s) & 0xFFFFFFFF) | (x >> (32 - s));
-+}
-+
-+#define ROUND1(a,b,c,d,k,s) (*a) = lshift((*a) + F(*b,*c,*d) + X[k], s)
-+#define ROUND2(a,b,c,d,k,s) (*a) = lshift((*a) + G(*b,*c,*d) + X[k] + (__u32)0x5A827999,s)
-+#define ROUND3(a,b,c,d,k,s) (*a) = lshift((*a) + H(*b,*c,*d) + X[k] + (__u32)0x6ED9EBA1,s)
-+
-+/* this applies md4 to 64 byte chunks */
-+static void
-+mdfour64(__u32 * M, __u32 * A, __u32 *B, __u32 * C, __u32 *D)
-+{
-+	int j;
-+	__u32 AA, BB, CC, DD;
-+	__u32 X[16];
-+
-+
-+	for (j = 0; j < 16; j++)
-+		X[j] = M[j];
-+
-+	AA = *A;
-+	BB = *B;
-+	CC = *C;
-+	DD = *D;
-+
-+	ROUND1(A, B, C, D, 0, 3);
-+	ROUND1(D, A, B, C, 1, 7);
-+	ROUND1(C, D, A, B, 2, 11);
-+	ROUND1(B, C, D, A, 3, 19);
-+	ROUND1(A, B, C, D, 4, 3);
-+	ROUND1(D, A, B, C, 5, 7);
-+	ROUND1(C, D, A, B, 6, 11);
-+	ROUND1(B, C, D, A, 7, 19);
-+	ROUND1(A, B, C, D, 8, 3);
-+	ROUND1(D, A, B, C, 9, 7);
-+	ROUND1(C, D, A, B, 10, 11);
-+	ROUND1(B, C, D, A, 11, 19);
-+	ROUND1(A, B, C, D, 12, 3);
-+	ROUND1(D, A, B, C, 13, 7);
-+	ROUND1(C, D, A, B, 14, 11);
-+	ROUND1(B, C, D, A, 15, 19);
-+
-+	ROUND2(A, B, C, D, 0, 3);
-+	ROUND2(D, A, B, C, 4, 5);
-+	ROUND2(C, D, A, B, 8, 9);
-+	ROUND2(B, C, D, A, 12, 13);
-+	ROUND2(A, B, C, D, 1, 3);
-+	ROUND2(D, A, B, C, 5, 5);
-+	ROUND2(C, D, A, B, 9, 9);
-+	ROUND2(B, C, D, A, 13, 13);
-+	ROUND2(A, B, C, D, 2, 3);
-+	ROUND2(D, A, B, C, 6, 5);
-+	ROUND2(C, D, A, B, 10, 9);
-+	ROUND2(B, C, D, A, 14, 13);
-+	ROUND2(A, B, C, D, 3, 3);
-+	ROUND2(D, A, B, C, 7, 5);
-+	ROUND2(C, D, A, B, 11, 9);
-+	ROUND2(B, C, D, A, 15, 13);
-+
-+	ROUND3(A, B, C, D, 0, 3);
-+	ROUND3(D, A, B, C, 8, 9);
-+	ROUND3(C, D, A, B, 4, 11);
-+	ROUND3(B, C, D, A, 12, 15);
-+	ROUND3(A, B, C, D, 2, 3);
-+	ROUND3(D, A, B, C, 10, 9);
-+	ROUND3(C, D, A, B, 6, 11);
-+	ROUND3(B, C, D, A, 14, 15);
-+	ROUND3(A, B, C, D, 1, 3);
-+	ROUND3(D, A, B, C, 9, 9);
-+	ROUND3(C, D, A, B, 5, 11);
-+	ROUND3(B, C, D, A, 13, 15);
-+	ROUND3(A, B, C, D, 3, 3);
-+	ROUND3(D, A, B, C, 11, 9);
-+	ROUND3(C, D, A, B, 7, 11);
-+	ROUND3(B, C, D, A, 15, 15);
-+
-+	*A += AA;
-+	*B += BB;
-+	*C += CC;
-+	*D += DD;
-+
-+	*A &= 0xFFFFFFFF;
-+	*B &= 0xFFFFFFFF;
-+	*C &= 0xFFFFFFFF;
-+	*D &= 0xFFFFFFFF;
-+
-+	for (j = 0; j < 16; j++)
-+		X[j] = 0;
-+}
-+
-+static void
-+copy64(__u32 * M, unsigned char *in)
-+{
-+	int i;
-+
-+	for (i = 0; i < 16; i++)
-+		M[i] = (in[i * 4 + 3] << 24) | (in[i * 4 + 2] << 16) |
-+		    (in[i * 4 + 1] << 8) | (in[i * 4 + 0] << 0);
-+}
-+
-+static void
-+copy4(unsigned char *out, __u32 x)
-+{
-+	out[0] = x & 0xFF;
-+	out[1] = (x >> 8) & 0xFF;
-+	out[2] = (x >> 16) & 0xFF;
-+	out[3] = (x >> 24) & 0xFF;
-+}
-+
-+/* produce a md4 message digest from data of length n bytes */
-+void
-+mdfour(unsigned char *out, unsigned char *in, int n)
-+{
-+	unsigned char buf[128];
-+	__u32 M[16];
-+	__u32 b = n * 8;
-+	int i;
-+	__u32 A = 0x67452301;
-+	__u32 B = 0xefcdab89;
-+	__u32 C = 0x98badcfe;
-+	__u32 D = 0x10325476;
-+
-+	while (n > 64) {
-+		copy64(M, in);
-+		mdfour64(M,&A,&B, &C, &D);
-+		in += 64;
-+		n -= 64;
-+	}
-+
-+	for (i = 0; i < 128; i++)
-+		buf[i] = 0;
-+	memcpy(buf, in, n);
-+	buf[n] = 0x80;
-+
-+	if (n <= 55) {
-+		copy4(buf + 56, b);
-+		copy64(M, buf);
-+		mdfour64(M, &A, &B, &C, &D);
-+	} else {
-+		copy4(buf + 120, b);
-+		copy64(M, buf);
-+		mdfour64(M, &A, &B, &C, &D);
-+		copy64(M, buf + 64);
-+		mdfour64(M, &A, &B, &C, &D);
-+	}
-+
-+	for (i = 0; i < 128; i++)
-+		buf[i] = 0;
-+	copy64(M, buf);
-+
-+	copy4(out, A);
-+	copy4(out + 4, B);
-+	copy4(out + 8, C);
-+	copy4(out + 12, D);
-+
-+	A = B = C = D = 0;
-+}
-diff -urN linux-2.4.29.old/fs/cifs/md5.c linux-2.4.29/fs/cifs/md5.c
---- linux-2.4.29.old/fs/cifs/md5.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/md5.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,363 @@
-+/*
-+ * This code implements the MD5 message-digest algorithm.
-+ * The algorithm is due to Ron Rivest.  This code was
-+ * written by Colin Plumb in 1993, no copyright is claimed.
-+ * This code is in the public domain; do with it what you wish.
-+ *
-+ * Equivalent code is available from RSA Data Security, Inc.
-+ * This code has been tested against that, and is equivalent,
-+ * except that you don't need to include two pages of legalese
-+ * with every copy.
-+ *
-+ * To compute the message digest of a chunk of bytes, declare an
-+ * MD5Context structure, pass it to MD5Init, call MD5Update as
-+ * needed on buffers full of bytes, and then call MD5Final, which
-+ * will fill a supplied 16-byte array with the digest.
-+ */
-+
-+/* This code slightly modified to fit into Samba by 
-+   abartlet@samba.org Jun 2001 
-+   and to fit the cifs vfs by 
-+   Steve French sfrench@us.ibm.com */
-+
-+#include <linux/string.h>
-+#include "md5.h"
-+
-+static void MD5Transform(__u32 buf[4], __u32 const in[16]);
-+
-+/*
-+ * Note: this code is harmless on little-endian machines.
-+ */
-+static void
-+byteReverse(unsigned char *buf, unsigned longs)
-+{
-+	__u32 t;
-+	do {
-+		t = (__u32) ((unsigned) buf[3] << 8 | buf[2]) << 16 |
-+		    ((unsigned) buf[1] << 8 | buf[0]);
-+		*(__u32 *) buf = t;
-+		buf += 4;
-+	} while (--longs);
-+}
-+
-+/*
-+ * Start MD5 accumulation.  Set bit count to 0 and buffer to mysterious
-+ * initialization constants.
-+ */
-+void
-+MD5Init(struct MD5Context *ctx)
-+{
-+	ctx->buf[0] = 0x67452301;
-+	ctx->buf[1] = 0xefcdab89;
-+	ctx->buf[2] = 0x98badcfe;
-+	ctx->buf[3] = 0x10325476;
-+
-+	ctx->bits[0] = 0;
-+	ctx->bits[1] = 0;
-+}
-+
-+/*
-+ * Update context to reflect the concatenation of another buffer full
-+ * of bytes.
-+ */
-+void
-+MD5Update(struct MD5Context *ctx, unsigned char const *buf, unsigned len)
-+{
-+	register __u32 t;
-+
-+	/* Update bitcount */
-+
-+	t = ctx->bits[0];
-+	if ((ctx->bits[0] = t + ((__u32) len << 3)) < t)
-+		ctx->bits[1]++;	/* Carry from low to high */
-+	ctx->bits[1] += len >> 29;
-+
-+	t = (t >> 3) & 0x3f;	/* Bytes already in shsInfo->data */
-+
-+	/* Handle any leading odd-sized chunks */
-+
-+	if (t) {
-+		unsigned char *p = (unsigned char *) ctx->in + t;
-+
-+		t = 64 - t;
-+		if (len < t) {
-+			memmove(p, buf, len);
-+			return;
-+		}
-+		memmove(p, buf, t);
-+		byteReverse(ctx->in, 16);
-+		MD5Transform(ctx->buf, (__u32 *) ctx->in);
-+		buf += t;
-+		len -= t;
-+	}
-+	/* Process data in 64-byte chunks */
-+
-+	while (len >= 64) {
-+		memmove(ctx->in, buf, 64);
-+		byteReverse(ctx->in, 16);
-+		MD5Transform(ctx->buf, (__u32 *) ctx->in);
-+		buf += 64;
-+		len -= 64;
-+	}
-+
-+	/* Handle any remaining bytes of data. */
-+
-+	memmove(ctx->in, buf, len);
-+}
-+
-+/*
-+ * Final wrapup - pad to 64-byte boundary with the bit pattern 
-+ * 1 0* (64-bit count of bits processed, MSB-first)
-+ */
-+void
-+MD5Final(unsigned char digest[16], struct MD5Context *ctx)
-+{
-+	unsigned int count;
-+	unsigned char *p;
-+
-+	/* Compute number of bytes mod 64 */
-+	count = (ctx->bits[0] >> 3) & 0x3F;
-+
-+	/* Set the first char of padding to 0x80.  This is safe since there is
-+	   always at least one byte free */
-+	p = ctx->in + count;
-+	*p++ = 0x80;
-+
-+	/* Bytes of padding needed to make 64 bytes */
-+	count = 64 - 1 - count;
-+
-+	/* Pad out to 56 mod 64 */
-+	if (count < 8) {
-+		/* Two lots of padding:  Pad the first block to 64 bytes */
-+		memset(p, 0, count);
-+		byteReverse(ctx->in, 16);
-+		MD5Transform(ctx->buf, (__u32 *) ctx->in);
-+
-+		/* Now fill the next block with 56 bytes */
-+		memset(ctx->in, 0, 56);
-+	} else {
-+		/* Pad block to 56 bytes */
-+		memset(p, 0, count - 8);
-+	}
-+	byteReverse(ctx->in, 14);
-+
-+	/* Append length in bits and transform */
-+	((__u32 *) ctx->in)[14] = ctx->bits[0];
-+	((__u32 *) ctx->in)[15] = ctx->bits[1];
-+
-+	MD5Transform(ctx->buf, (__u32 *) ctx->in);
-+	byteReverse((unsigned char *) ctx->buf, 4);
-+	memmove(digest, ctx->buf, 16);
-+	memset(ctx, 0, sizeof(*ctx));	/* In case it's sensitive */
-+}
-+
-+/* The four core functions - F1 is optimized somewhat */
-+
-+/* #define F1(x, y, z) (x & y | ~x & z) */
-+#define F1(x, y, z) (z ^ (x & (y ^ z)))
-+#define F2(x, y, z) F1(z, x, y)
-+#define F3(x, y, z) (x ^ y ^ z)
-+#define F4(x, y, z) (y ^ (x | ~z))
-+
-+/* This is the central step in the MD5 algorithm. */
-+#define MD5STEP(f, w, x, y, z, data, s) \
-+	( w += f(x, y, z) + data,  w = w<<s | w>>(32-s),  w += x )
-+
-+/*
-+ * The core of the MD5 algorithm, this alters an existing MD5 hash to
-+ * reflect the addition of 16 longwords of new data.  MD5Update blocks
-+ * the data and converts bytes into longwords for this routine.
-+ */
-+static void
-+MD5Transform(__u32 buf[4], __u32 const in[16])
-+{
-+	register __u32 a, b, c, d;
-+
-+	a = buf[0];
-+	b = buf[1];
-+	c = buf[2];
-+	d = buf[3];
-+
-+	MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7);
-+	MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12);
-+	MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17);
-+	MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22);
-+	MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7);
-+	MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12);
-+	MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17);
-+	MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22);
-+	MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7);
-+	MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12);
-+	MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17);
-+	MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22);
-+	MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7);
-+	MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12);
-+	MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17);
-+	MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22);
-+
-+	MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5);
-+	MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9);
-+	MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14);
-+	MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20);
-+	MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5);
-+	MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9);
-+	MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14);
-+	MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20);
-+	MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5);
-+	MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9);
-+	MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14);
-+	MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20);
-+	MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5);
-+	MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9);
-+	MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14);
-+	MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20);
-+
-+	MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4);
-+	MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11);
-+	MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16);
-+	MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23);
-+	MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4);
-+	MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11);
-+	MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16);
-+	MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23);
-+	MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4);
-+	MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11);
-+	MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16);
-+	MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23);
-+	MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4);
-+	MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11);
-+	MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16);
-+	MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23);
-+
-+	MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6);
-+	MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10);
-+	MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15);
-+	MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21);
-+	MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6);
-+	MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10);
-+	MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15);
-+	MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21);
-+	MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6);
-+	MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10);
-+	MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15);
-+	MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21);
-+	MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6);
-+	MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10);
-+	MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15);
-+	MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21);
-+
-+	buf[0] += a;
-+	buf[1] += b;
-+	buf[2] += c;
-+	buf[3] += d;
-+}
-+
-+/***********************************************************************
-+ the rfc 2104 version of hmac_md5 initialisation.
-+***********************************************************************/
-+void
-+hmac_md5_init_rfc2104(unsigned char *key, int key_len,
-+		      struct HMACMD5Context *ctx)
-+{
-+	int i;
-+
-+	/* if key is longer than 64 bytes reset it to key=MD5(key) */
-+	if (key_len > 64) {
-+		unsigned char tk[16];
-+		struct MD5Context tctx;
-+
-+		MD5Init(&tctx);
-+		MD5Update(&tctx, key, key_len);
-+		MD5Final(tk, &tctx);
-+
-+		key = tk;
-+		key_len = 16;
-+	}
-+
-+	/* start out by storing key in pads */
-+	memset(ctx->k_ipad, 0, sizeof (ctx->k_ipad));
-+	memset(ctx->k_opad, 0, sizeof (ctx->k_opad));
-+	memcpy(ctx->k_ipad, key, key_len);
-+	memcpy(ctx->k_opad, key, key_len);
-+
-+	/* XOR key with ipad and opad values */
-+	for (i = 0; i < 64; i++) {
-+		ctx->k_ipad[i] ^= 0x36;
-+		ctx->k_opad[i] ^= 0x5c;
-+	}
-+
-+	MD5Init(&ctx->ctx);
-+	MD5Update(&ctx->ctx, ctx->k_ipad, 64);
-+}
-+
-+/***********************************************************************
-+ the microsoft version of hmac_md5 initialisation.
-+***********************************************************************/
-+void
-+hmac_md5_init_limK_to_64(const unsigned char *key, int key_len,
-+			 struct HMACMD5Context *ctx)
-+{
-+	int i;
-+
-+	/* if key is longer than 64 bytes truncate it */
-+	if (key_len > 64) {
-+		key_len = 64;
-+	}
-+
-+	/* start out by storing key in pads */
-+	memset(ctx->k_ipad, 0, sizeof (ctx->k_ipad));
-+	memset(ctx->k_opad, 0, sizeof (ctx->k_opad));
-+	memcpy(ctx->k_ipad, key, key_len);
-+	memcpy(ctx->k_opad, key, key_len);
-+
-+	/* XOR key with ipad and opad values */
-+	for (i = 0; i < 64; i++) {
-+		ctx->k_ipad[i] ^= 0x36;
-+		ctx->k_opad[i] ^= 0x5c;
-+	}
-+
-+	MD5Init(&ctx->ctx);
-+	MD5Update(&ctx->ctx, ctx->k_ipad, 64);
-+}
-+
-+/***********************************************************************
-+ update hmac_md5 "inner" buffer
-+***********************************************************************/
-+void
-+hmac_md5_update(const unsigned char *text, int text_len,
-+		struct HMACMD5Context *ctx)
-+{
-+	MD5Update(&ctx->ctx, text, text_len);	/* then text of datagram */
-+}
-+
-+/***********************************************************************
-+ finish off hmac_md5 "inner" buffer and generate outer one.
-+***********************************************************************/
-+void
-+hmac_md5_final(unsigned char *digest, struct HMACMD5Context *ctx)
-+{
-+	struct MD5Context ctx_o;
-+
-+	MD5Final(digest, &ctx->ctx);
-+
-+	MD5Init(&ctx_o);
-+	MD5Update(&ctx_o, ctx->k_opad, 64);
-+	MD5Update(&ctx_o, digest, 16);
-+	MD5Final(digest, &ctx_o);
-+}
-+
-+/***********************************************************
-+ single function to calculate an HMAC MD5 digest from data.
-+ use the microsoft hmacmd5 init method because the key is 16 bytes.
-+************************************************************/
-+void
-+hmac_md5(unsigned char key[16], unsigned char *data, int data_len,
-+	 unsigned char *digest)
-+{
-+	struct HMACMD5Context ctx;
-+	hmac_md5_init_limK_to_64(key, 16, &ctx);
-+	if (data_len != 0) {
-+		hmac_md5_update(data, data_len, &ctx);
-+	}
-+	hmac_md5_final(digest, &ctx);
-+}
-diff -urN linux-2.4.29.old/fs/cifs/md5.h linux-2.4.29/fs/cifs/md5.h
---- linux-2.4.29.old/fs/cifs/md5.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/md5.h	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,38 @@
-+#ifndef MD5_H
-+#define MD5_H
-+#ifndef HEADER_MD5_H
-+/* Try to avoid clashes with OpenSSL */
-+#define HEADER_MD5_H
-+#endif
-+
-+struct MD5Context {
-+	__u32 buf[4];
-+	__u32 bits[2];
-+	unsigned char in[64];
-+};
-+#endif				/* !MD5_H */
-+
-+#ifndef _HMAC_MD5_H
-+struct HMACMD5Context {
-+	struct MD5Context ctx;
-+	unsigned char k_ipad[65];
-+	unsigned char k_opad[65];
-+};
-+#endif				/* _HMAC_MD5_H */
-+
-+void MD5Init(struct MD5Context *context);
-+void MD5Update(struct MD5Context *context, unsigned char const *buf,
-+			unsigned len);
-+void MD5Final(unsigned char digest[16], struct MD5Context *context);
-+
-+/* The following definitions come from lib/hmacmd5.c  */
-+
-+void hmac_md5_init_rfc2104(unsigned char *key, int key_len,
-+			struct HMACMD5Context *ctx);
-+void hmac_md5_init_limK_to_64(const unsigned char *key, int key_len,
-+			struct HMACMD5Context *ctx);
-+void hmac_md5_update(const unsigned char *text, int text_len,
-+			struct HMACMD5Context *ctx);
-+void hmac_md5_final(unsigned char *digest, struct HMACMD5Context *ctx);
-+void hmac_md5(unsigned char key[16], unsigned char *data, int data_len,
-+			unsigned char *digest);
-diff -urN linux-2.4.29.old/fs/cifs/misc.c linux-2.4.29/fs/cifs/misc.c
---- linux-2.4.29.old/fs/cifs/misc.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/misc.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,463 @@
-+/*
-+ *   fs/cifs/misc.c
-+ *
-+ *   Copyright (C) International Business Machines  Corp., 2002,2003
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 
-+ */
-+
-+#include <linux/slab.h>
-+#include <linux/ctype.h>
-+#include "cifspdu.h"
-+#include "cifsglob.h"
-+#include "cifsproto.h"
-+#include "cifs_debug.h"
-+#include "smberr.h"
-+#include "nterr.h"
-+
-+extern kmem_cache_t *cifs_req_cachep;
-+extern struct task_struct * oplockThread;
-+
-+__u16 GlobalMid;		/* multiplex id - rotating counter */
-+
-+/* The xid serves as a useful identifier for each incoming vfs request, 
-+   in a similar way to the mid which is useful to track each sent smb, 
-+   and CurrentXid can also provide a running counter (although it 
-+   will eventually wrap past zero) of the total vfs operations handled 
-+   since the cifs fs was mounted */
-+
-+unsigned int
-+_GetXid(void)
-+{
-+	unsigned int xid;
-+
-+	spin_lock(&GlobalMid_Lock);
-+	GlobalTotalActiveXid++;
-+	if (GlobalTotalActiveXid > GlobalMaxActiveXid)
-+		GlobalMaxActiveXid = GlobalTotalActiveXid;	/* keep high water mark for number of simultaneous vfs ops in our filesystem */
-+	xid = GlobalCurrentXid++;
-+	spin_unlock(&GlobalMid_Lock);
-+	return xid;
-+}
-+
-+void
-+_FreeXid(unsigned int xid)
-+{
-+	spin_lock(&GlobalMid_Lock);
-+	/* if(GlobalTotalActiveXid == 0)
-+		BUG(); */
-+	GlobalTotalActiveXid--;
-+	spin_unlock(&GlobalMid_Lock);
-+}
-+
-+struct cifsSesInfo *
-+sesInfoAlloc(void)
-+{
-+	struct cifsSesInfo *ret_buf;
-+
-+	ret_buf =
-+	    (struct cifsSesInfo *) kmalloc(sizeof (struct cifsSesInfo),
-+					   GFP_KERNEL);
-+	if (ret_buf) {
-+		memset(ret_buf, 0, sizeof (struct cifsSesInfo));
-+		write_lock(&GlobalSMBSeslock);
-+		atomic_inc(&sesInfoAllocCount);
-+		ret_buf->status = CifsNew;
-+		list_add(&ret_buf->cifsSessionList, &GlobalSMBSessionList);
-+		init_MUTEX(&ret_buf->sesSem);
-+		write_unlock(&GlobalSMBSeslock);
-+	}
-+	return ret_buf;
-+}
-+
-+void
-+sesInfoFree(struct cifsSesInfo *buf_to_free)
-+{
-+	if (buf_to_free == NULL) {
-+		cFYI(1, ("Null buffer passed to sesInfoFree"));
-+		return;
-+	}
-+
-+	write_lock(&GlobalSMBSeslock);
-+	atomic_dec(&sesInfoAllocCount);
-+	list_del(&buf_to_free->cifsSessionList);
-+	write_unlock(&GlobalSMBSeslock);
-+	if (buf_to_free->serverOS)
-+		kfree(buf_to_free->serverOS);
-+	if (buf_to_free->serverDomain)
-+		kfree(buf_to_free->serverDomain);
-+	if (buf_to_free->serverNOS)
-+		kfree(buf_to_free->serverNOS);
-+	if (buf_to_free->password)
-+		kfree(buf_to_free->password);
-+	kfree(buf_to_free);
-+}
-+
-+struct cifsTconInfo *
-+tconInfoAlloc(void)
-+{
-+	struct cifsTconInfo *ret_buf;
-+	ret_buf =
-+	    (struct cifsTconInfo *) kmalloc(sizeof (struct cifsTconInfo),
-+					    GFP_KERNEL);
-+	if (ret_buf) {
-+		memset(ret_buf, 0, sizeof (struct cifsTconInfo));
-+		write_lock(&GlobalSMBSeslock);
-+		atomic_inc(&tconInfoAllocCount);
-+		list_add(&ret_buf->cifsConnectionList,
-+			 &GlobalTreeConnectionList);
-+		ret_buf->tidStatus = CifsNew;
-+		INIT_LIST_HEAD(&ret_buf->openFileList);
-+		init_MUTEX(&ret_buf->tconSem);
-+#ifdef CONFIG_CIFS_STATS
-+		ret_buf->stat_lock = SPIN_LOCK_UNLOCKED;
-+#endif
-+		write_unlock(&GlobalSMBSeslock);
-+	}
-+	return ret_buf;
-+}
-+
-+void
-+tconInfoFree(struct cifsTconInfo *buf_to_free)
-+{
-+	if (buf_to_free == NULL) {
-+		cFYI(1, ("Null buffer passed to tconInfoFree"));
-+		return;
-+	}
-+	write_lock(&GlobalSMBSeslock);
-+	atomic_dec(&tconInfoAllocCount);
-+	list_del(&buf_to_free->cifsConnectionList);
-+	write_unlock(&GlobalSMBSeslock);
-+	if (buf_to_free->nativeFileSystem)
-+		kfree(buf_to_free->nativeFileSystem);
-+	kfree(buf_to_free);
-+}
-+
-+struct smb_hdr *
-+cifs_buf_get(void)
-+{
-+	struct smb_hdr *ret_buf = NULL;
-+
-+/* We could use negotiated size instead of max_msgsize - 
-+   but it may be more efficient to always alloc same size 
-+   albeit slightly larger than necessary and maxbuffersize 
-+   defaults to this and can not be bigger */
-+	ret_buf =
-+	    (struct smb_hdr *) kmem_cache_alloc(cifs_req_cachep, SLAB_KERNEL);
-+
-+	/* clear the first few header bytes */
-+	if (ret_buf) {
-+		memset(ret_buf, 0, sizeof (struct smb_hdr));
-+		atomic_inc(&bufAllocCount);
-+	}
-+
-+	return ret_buf;
-+}
-+
-+void
-+cifs_buf_release(void *buf_to_free)
-+{
-+
-+	if (buf_to_free == NULL) {
-+		cFYI(1, ("Null buffer passed to cifs_buf_release"));
-+		return;
-+	}
-+	kmem_cache_free(cifs_req_cachep, buf_to_free);
-+
-+	atomic_dec(&bufAllocCount);
-+	return;
-+}
-+
-+void
-+header_assemble(struct smb_hdr *buffer, char smb_command /* command */ ,
-+		const struct cifsTconInfo *treeCon, int word_count
-+		/* length of fixed section (word count) in two byte units  */
-+    )
-+{
-+	int i;
-+	__u32 tmp;
-+	struct list_head* temp_item;
-+	struct cifsSesInfo * ses;
-+	char *temp = (char *) buffer;
-+
-+	for (i = 0; i < MAX_CIFS_HDR_SIZE; i++) {
-+		temp[i] = 0;	/* BB is this needed ?? */
-+	}
-+
-+	buffer->smb_buf_length =
-+	    (2 * word_count) + sizeof (struct smb_hdr) -
-+	    4 /*  RFC 1001 length field does not count */  +
-+	    2 /* for bcc field itself */ ;
-+	/* Note that this is the only network field that has to be converted to big endian and it is done just before we send it */
-+
-+	buffer->Protocol[0] = 0xFF;
-+	buffer->Protocol[1] = 'S';
-+	buffer->Protocol[2] = 'M';
-+	buffer->Protocol[3] = 'B';
-+	buffer->Command = smb_command;
-+	buffer->Flags = 0x00;	/* case sensitive */
-+	buffer->Flags2 = SMBFLG2_KNOWS_LONG_NAMES;
-+	tmp = cpu_to_le32(current->pid);
-+	buffer->Pid = tmp & 0xFFFF;
-+	tmp >>= 16;
-+	buffer->PidHigh = tmp & 0xFFFF;
-+	spin_lock(&GlobalMid_Lock);
-+	GlobalMid++;
-+	buffer->Mid = GlobalMid;
-+	spin_unlock(&GlobalMid_Lock);
-+	if (treeCon) {
-+		buffer->Tid = treeCon->tid;
-+		if (treeCon->ses) {
-+			if (treeCon->ses->capabilities & CAP_UNICODE)
-+				buffer->Flags2 |= SMBFLG2_UNICODE;
-+			if (treeCon->ses->capabilities & CAP_STATUS32) {
-+				buffer->Flags2 |= SMBFLG2_ERR_STATUS;
-+			}
-+
-+			buffer->Uid = treeCon->ses->Suid;	/* always in LE format */
-+			if(multiuser_mount != 0) {
-+		/* For the multiuser case, there are few obvious technically  */
-+		/* possible mechanisms to match the local linux user (uid)    */
-+		/* to a valid remote smb user (smb_uid):		      */
-+		/* 	1) Query Winbind (or other local pam/nss daemon       */
-+		/* 	  for userid/password/logon_domain or credential      */
-+		/*      2) Query Winbind for uid to sid to username mapping   */
-+		/* 	   and see if we have a matching password for existing*/
-+		/*         session for that user perhas getting password by   */
-+		/*         adding a new pam_cifs module that stores passwords */
-+		/*         so that the cifs vfs can get at that for all logged*/
-+		/*	   on users					      */
-+		/*	3) (Which is the mechanism we have chosen)	      */
-+		/*	   Search through sessions to the same server for a   */
-+		/*	   a match on the uid that was passed in on mount     */
-+		/*         with the current processes uid (or euid?) and use  */
-+		/* 	   that smb uid.   If no existing smb session for     */
-+		/* 	   that uid found, use the default smb session ie     */
-+		/*         the smb session for the volume mounted which is    */
-+		/* 	   the same as would be used if the multiuser mount   */
-+		/* 	   flag were disabled.  */
-+
-+		/*  BB Add support for establishing new tCon and SMB Session  */
-+		/*      with userid/password pairs found on the smb session   */ 
-+		/*	for other target tcp/ip addresses 		BB    */
-+				if(current->uid != treeCon->ses->linux_uid) {
-+					cFYI(1,("Multiuser mode and UID did not match tcon uid "));
-+					read_lock(&GlobalSMBSeslock);
-+					list_for_each(temp_item, &GlobalSMBSessionList) {
-+						ses = list_entry(temp_item, struct cifsSesInfo, cifsSessionList);
-+						if(ses->linux_uid == current->uid) {
-+							if(ses->server == treeCon->ses->server) {
-+								cFYI(1,("found matching uid substitute right smb_uid"));  
-+								buffer->Uid = ses->Suid;
-+								break;
-+							} else {
-+								/* BB eventually call cifs_setup_session here */
-+								cFYI(1,("local UID found but smb sess with this server does not exist"));  
-+							}
-+						}
-+					}
-+					read_unlock(&GlobalSMBSeslock);
-+				}
-+			}
-+		}
-+		if (treeCon->Flags & SMB_SHARE_IS_IN_DFS)
-+			buffer->Flags2 |= SMBFLG2_DFS;
-+		if(treeCon->ses->server)
-+			if(treeCon->ses->server->secMode & 
-+			  (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-+				buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-+	}
-+
-+/*  endian conversion of flags is now done just before sending */
-+	buffer->WordCount = (char) word_count;
-+	return;
-+}
-+
-+int
-+checkSMBhdr(struct smb_hdr *smb, __u16 mid)
-+{
-+	/* Make sure that this really is an SMB, that it is a response, 
-+	   and that the message ids match */
-+	if ((*(unsigned int *) smb->Protocol == cpu_to_le32(0x424d53ff)) && 
-+		(mid == smb->Mid)) {    
-+		if(smb->Flags & SMBFLG_RESPONSE)
-+			return 0;                    
-+		else {        
-+		/* only one valid case where server sends us request */
-+			if(smb->Command == SMB_COM_LOCKING_ANDX)
-+				return 0;
-+			else
-+				cERROR(1, ("Rcvd Request not response "));         
-+		}
-+	} else { /* bad signature or mid */
-+		if (*(unsigned int *) smb->Protocol != cpu_to_le32(0x424d53ff))
-+			cERROR(1,
-+			       ("Bad protocol string signature header %x ",
-+				*(unsigned int *) smb->Protocol));
-+		if (mid != smb->Mid)
-+			cERROR(1, ("Mids do not match"));
-+	}
-+	cERROR(1, ("bad smb detected. The Mid=%d", smb->Mid));
-+	return 1;
-+}
-+
-+int
-+checkSMB(struct smb_hdr *smb, __u16 mid, int length)
-+{
-+	cFYI(0,
-+	     ("Entering checkSMB with Length: %x, smb_buf_length: %x ",
-+	      length, ntohl(smb->smb_buf_length)));
-+	if (((unsigned int)length < 2 + sizeof (struct smb_hdr))
-+	    || (ntohl(smb->smb_buf_length) >
-+		CIFS_MAX_MSGSIZE + MAX_CIFS_HDR_SIZE - 4)) {
-+		if ((unsigned int)length < 2 + sizeof (struct smb_hdr)) {
-+			cERROR(1, ("Length less than 2 + sizeof smb_hdr "));
-+			if (((unsigned int)length >= sizeof (struct smb_hdr) - 1)
-+			    && (smb->Status.CifsError != 0))
-+				return 0;	/* some error cases do not return wct and bcc */
-+
-+		}
-+		if (ntohl(smb->smb_buf_length) >
-+		    CIFS_MAX_MSGSIZE + MAX_CIFS_HDR_SIZE - 4)
-+			cERROR(1,
-+			       ("smb_buf_length greater than CIFS_MAX_MSGSIZE ... "));
-+		cERROR(1,
-+		       ("bad smb detected. Illegal length. The mid=%d",
-+			smb->Mid));
-+		return 1;
-+	}
-+
-+	if (checkSMBhdr(smb, mid))
-+		return 1;
-+
-+	if ((4 + ntohl(smb->smb_buf_length) != smbCalcSize(smb))
-+	    || (4 + ntohl(smb->smb_buf_length) != (unsigned int)length)) {
-+		return 0;
-+	} else {
-+		cERROR(1, ("smbCalcSize %x ", smbCalcSize(smb)));
-+		cERROR(1,
-+		       ("bad smb size detected. The Mid=%d", smb->Mid));
-+		return 1;
-+	}
-+}
-+int
-+is_valid_oplock_break(struct smb_hdr *buf)
-+{    
-+	struct smb_com_lock_req * pSMB = (struct smb_com_lock_req *)buf;
-+	struct list_head *tmp;
-+	struct list_head *tmp1;
-+	struct cifsTconInfo *tcon;
-+	struct cifsFileInfo *netfile;
-+
-+	/* could add check for smb response flag 0x80 */
-+	cFYI(1,("Checking for oplock break"));    
-+	if(pSMB->hdr.Command != SMB_COM_LOCKING_ANDX)
-+		return FALSE;
-+	if(pSMB->hdr.Flags & SMBFLG_RESPONSE) {
-+		/* no sense logging error on invalid handle on oplock
-+		   break - harmless race between close request and oplock
-+		   break response is expected from time to time writing out
-+		   large dirty files cached on the client */
-+		if ((NT_STATUS_INVALID_HANDLE) == 
-+		   le32_to_cpu(pSMB->hdr.Status.CifsError)) { 
-+			cFYI(1,("invalid handle on oplock break"));
-+			return TRUE;
-+		} else if (ERRbadfid == 
-+		   le16_to_cpu(pSMB->hdr.Status.DosError.Error)) {
-+			return TRUE;	  
-+		} else {
-+			return FALSE; /* on valid oplock brk we get "request" */
-+		}
-+	}
-+	if(pSMB->hdr.WordCount != 8)
-+		return FALSE;
-+
-+	cFYI(1,(" oplock type 0x%d level 0x%d",pSMB->LockType,pSMB->OplockLevel));
-+	if(!(pSMB->LockType & LOCKING_ANDX_OPLOCK_RELEASE))
-+		return FALSE;    
-+
-+	/* look up tcon based on tid & uid */
-+	read_lock(&GlobalSMBSeslock);
-+	list_for_each(tmp, &GlobalTreeConnectionList) {
-+		tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
-+		if (tcon->tid == buf->Tid) {
-+#ifdef CONFIG_CIFS_STATS
-+			atomic_inc(&tcon->num_oplock_brks);
-+#endif
-+			list_for_each(tmp1,&tcon->openFileList){
-+				netfile = list_entry(tmp1,struct cifsFileInfo,tlist);
-+				if(pSMB->Fid == netfile->netfid) {
-+					struct cifsInodeInfo *pCifsInode;
-+					read_unlock(&GlobalSMBSeslock);
-+					cFYI(1,("Matching file id, processing oplock break"));
-+					pCifsInode = 
-+						CIFS_I(netfile->pInode);
-+					pCifsInode->clientCanCacheAll = FALSE;
-+					if(pSMB->OplockLevel == 0)
-+						pCifsInode->clientCanCacheRead = FALSE;
-+					pCifsInode->oplockPending = TRUE;
-+					AllocOplockQEntry(netfile->pInode, netfile->netfid, tcon);
-+					cFYI(1,("about to wake up oplock thd"));
-+					wake_up_process(oplockThread);               
-+					return TRUE;
-+				}
-+			}
-+			read_unlock(&GlobalSMBSeslock);
-+			cFYI(1,("No matching file for oplock break on connection"));
-+			return TRUE;
-+		}
-+	}
-+	read_unlock(&GlobalSMBSeslock);
-+	cFYI(1,("Can not process oplock break for non-existent connection"));
-+	return TRUE;
-+}
-+
-+void
-+dump_smb(struct smb_hdr *smb_buf, int smb_buf_length)
-+{
-+	int i, j;
-+	char debug_line[17];
-+	unsigned char *buffer;
-+
-+	if (traceSMB == 0)
-+		return;
-+
-+	buffer = (unsigned char *) smb_buf;
-+	for (i = 0, j = 0; i < smb_buf_length; i++, j++) {
-+		if (i % 8 == 0) {	/* we have reached the beginning of line  */
-+			printk(KERN_DEBUG "| ");
-+			j = 0;
-+		}
-+		printk("%0#4x ", buffer[i]);
-+		debug_line[2 * j] = ' ';
-+		if (isprint(buffer[i]))
-+			debug_line[1 + (2 * j)] = buffer[i];
-+		else
-+			debug_line[1 + (2 * j)] = '_';
-+
-+		if (i % 8 == 7) {	/* we have reached end of line, time to print ascii */
-+			debug_line[16] = 0;
-+			printk(" | %s\n", debug_line);
-+		}
-+	}
-+	for (; j < 8; j++) {
-+		printk("     ");
-+		debug_line[2 * j] = ' ';
-+		debug_line[1 + (2 * j)] = ' ';
-+	}
-+	printk( " | %s\n", debug_line);
-+	return;
-+}
-diff -urN linux-2.4.29.old/fs/cifs/netmisc.c linux-2.4.29/fs/cifs/netmisc.c
---- linux-2.4.29.old/fs/cifs/netmisc.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/netmisc.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,905 @@
-+/*
-+ *   fs/cifs/netmisc.c
-+ *
-+ *   Copyright (c) International Business Machines  Corp., 2002
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ * 
-+ *   Error mapping routines from Samba libsmb/errormap.c
-+ *   Copyright (C) Andrew Tridgell 2001
-+ *
-+ *
-+ *   This program is free software;  you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; either version 2 of the License, or 
-+ *   (at your option) any later version.
-+ * 
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program;  if not, write to the Free Software 
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/net.h>
-+#include <linux/string.h>
-+#include <linux/in.h>
-+#include <linux/ctype.h>
-+#include <linux/fs.h>
-+#include <asm/div64.h>
-+#include <asm/byteorder.h>
-+#include "cifsfs.h"
-+#include "cifspdu.h"
-+#include "cifsglob.h"
-+#include "cifsproto.h"
-+#include "smberr.h"
-+#include "cifs_debug.h"
-+#include "nterr.h"
-+
-+struct smb_to_posix_error {
-+	__u16 smb_err;
-+	int posix_code;
-+};
-+
-+const struct smb_to_posix_error mapping_table_ERRDOS[] = {
-+	{ERRbadfunc, -EINVAL},
-+	{ERRbadfile, -ENOENT},
-+	{ERRbadpath, -ENOTDIR},
-+	{ERRnofids, -EMFILE},
-+	{ERRnoaccess, -EACCES},
-+	{ERRbadfid, -EBADF},
-+	{ERRbadmcb, -EIO},
-+	{ERRnomem, -ENOMEM},
-+	{ERRbadmem, -EFAULT},
-+	{ERRbadenv, -EFAULT},
-+	{ERRbadformat, -EINVAL},
-+	{ERRbadaccess, -EACCES},
-+	{ERRbaddata, -EIO},
-+	{ERRbaddrive, -ENXIO},
-+	{ERRremcd, -EACCES},
-+	{ERRdiffdevice, -EXDEV},
-+	{ERRnofiles, -ENOENT},
-+	{ERRbadshare, -ETXTBSY},
-+	{ERRlock, -EACCES},
-+	{ERRunsup, -EINVAL},
-+	{ERRnosuchshare,-ENXIO},
-+	{ERRfilexists, -EEXIST},
-+	{ERRinvparm, -EINVAL},
-+	{ERRdiskfull, -ENOSPC},
-+	{ERRinvname, -ENOENT},
-+	{ERRdirnotempty, -ENOTEMPTY},
-+	{ERRnotlocked, -ENOLCK},
-+	{ERRalreadyexists, -EEXIST},
-+	{ERRmoredata, -EOVERFLOW},
-+	{ErrQuota, -EDQUOT},
-+	{ErrNotALink, -ENOLINK},
-+	{ERRnetlogonNotStarted,-ENOPROTOOPT},
-+	{0, 0}
-+};
-+
-+const struct smb_to_posix_error mapping_table_ERRSRV[] = {
-+	{ERRerror, -EIO},
-+	{ERRbadpw, -EPERM},
-+	{ERRbadtype, -EREMOTE},
-+	{ERRaccess, -EACCES},
-+	{ERRinvtid, -ENXIO},
-+	{ERRinvnetname, -ENODEV},
-+	{ERRinvdevice, -ENXIO},
-+	{ERRqfull, -ENOSPC},
-+	{ERRqtoobig, -ENOSPC},
-+	{ERRqeof, -EIO},
-+	{ERRinvpfid, -EBADF},
-+	{ERRsmbcmd, -EBADRQC},
-+	{ERRsrverror, -EIO},
-+	{ERRbadBID, -EIO},
-+	{ERRfilespecs, -EINVAL},
-+	{ERRbadLink, -EIO},
-+	{ERRbadpermits, -EINVAL},
-+	{ERRbadPID, -ESRCH},
-+	{ERRsetattrmode, -EINVAL},
-+	{ERRpaused, -EHOSTDOWN},
-+	{ERRmsgoff, -EHOSTDOWN},
-+	{ERRnoroom, -ENOSPC},
-+	{ERRrmuns, -EUSERS},
-+	{ERRtimeout, -ETIME},
-+	{ERRnoresource, -ENOBUFS},
-+	{ERRtoomanyuids, -EUSERS},
-+	{ERRbaduid, -EACCES},
-+	{ERRusempx, -EIO},
-+	{ERRusestd, -EIO},
-+	{ERR_NOTIFY_ENUM_DIR, -ENOBUFS},
-+	{ERRaccountexpired, -EACCES},
-+	{ERRbadclient, -EACCES},
-+	{ERRbadLogonTime, -EACCES},
-+	{ERRpasswordExpired, -EACCES},
-+	{ERRnosupport, -EINVAL},
-+	{0, 0}
-+};
-+
-+const struct smb_to_posix_error mapping_table_ERRHRD[] = {
-+	{0, 0}
-+};
-+
-+/* Convert string containing dotted ip address to binary form */
-+/* returns 0 if invalid address */
-+
-+/* BB add address family, change rc to status flag and return union or for ipv6 */
-+/*  will need parent to call something like inet_pton to convert ipv6 address  BB */
-+int
-+cifs_inet_pton(int address_family, char *cp,void *dst)
-+{
-+	struct in_addr address;
-+	int value;
-+	int digit;
-+	int i;
-+	char temp;
-+	char bytes[4];
-+	char *end = bytes;
-+	static const int addr_class_max[4] =
-+	    { 0xffffffff, 0xffffff, 0xffff, 0xff };
-+
-+	if(address_family != AF_INET)
-+		return -EAFNOSUPPORT;
-+
-+	for (i = 0; i < 4; i++) {
-+		bytes[i] = 0;
-+	}
-+
-+	temp = *cp;
-+
-+	while (TRUE) {
-+		if (!isdigit(temp))
-+			return 0;
-+
-+		value = 0;
-+		digit = 0;
-+		for (;;) {
-+			if (isascii(temp) && isdigit(temp)) {
-+				value = (value * 10) + temp - '0';
-+				temp = *++cp;
-+				digit = 1;
-+			} else
-+				break;
-+		}
-+
-+		if (temp == '.') {
-+			if ((end > bytes + 2) || (value > 255))
-+				return 0;
-+			*end++ = value;
-+			temp = *++cp;
-+		} else if (temp == ':') {
-+			cFYI(1,("IPv6 addresses not supported for CIFS mounts yet"));
-+			return -1;
-+		} else
-+			break;
-+	}
-+
-+	/* check for last characters */
-+	if (temp != '\0' && (!isascii(temp) || !isspace(temp)))
-+		if (temp != '\\') {
-+			if (temp != '/')
-+				return 0;
-+			else
-+				(*cp = '\\');	/* switch the slash the expected way */
-+		}
-+	if (value > addr_class_max[end - bytes])
-+		return 0;
-+
-+	address.s_addr = *((int *) bytes) | htonl(value);
-+	*((int *)dst) = address.s_addr;
-+	return 1; /* success */
-+}
-+
-+/*****************************************************************************
-+convert a NT status code to a dos class/code
-+ *****************************************************************************/
-+/* NT status -> dos error map */
-+static const struct {
-+	__u8 dos_class;
-+	__u16 dos_code;
-+	__u32 ntstatus;
-+} ntstatus_to_dos_map[] = {
-+	{
-+	ERRDOS, ERRgeneral, NT_STATUS_UNSUCCESSFUL}, {
-+	ERRDOS, ERRbadfunc, NT_STATUS_NOT_IMPLEMENTED}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_INFO_CLASS}, {
-+	ERRDOS, 24, NT_STATUS_INFO_LENGTH_MISMATCH}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ACCESS_VIOLATION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_IN_PAGE_ERROR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PAGEFILE_QUOTA}, {
-+	ERRDOS, ERRbadfid, NT_STATUS_INVALID_HANDLE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BAD_INITIAL_STACK}, {
-+	ERRDOS, 193, NT_STATUS_BAD_INITIAL_PC}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_CID}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_TIMER_NOT_CANCELED}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER}, {
-+	ERRDOS, ERRbadfile, NT_STATUS_NO_SUCH_DEVICE}, {
-+	ERRDOS, ERRbadfile, NT_STATUS_NO_SUCH_FILE}, {
-+	ERRDOS, ERRbadfunc, NT_STATUS_INVALID_DEVICE_REQUEST}, {
-+	ERRDOS, 38, NT_STATUS_END_OF_FILE}, {
-+	ERRDOS, 34, NT_STATUS_WRONG_VOLUME}, {
-+	ERRDOS, 21, NT_STATUS_NO_MEDIA_IN_DEVICE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNRECOGNIZED_MEDIA}, {
-+	ERRDOS, 27, NT_STATUS_NONEXISTENT_SECTOR},
-+/*	{ This NT error code was 'sqashed'
-+	 from NT_STATUS_MORE_PROCESSING_REQUIRED to NT_STATUS_OK 
-+	 during the session setup } */
-+	{
-+	ERRDOS, ERRnomem, NT_STATUS_NO_MEMORY}, {
-+	ERRDOS, 487, NT_STATUS_CONFLICTING_ADDRESSES}, {
-+	ERRDOS, 487, NT_STATUS_NOT_MAPPED_VIEW}, {
-+	ERRDOS, 87, NT_STATUS_UNABLE_TO_FREE_VM}, {
-+	ERRDOS, 87, NT_STATUS_UNABLE_TO_DELETE_SECTION}, {
-+	ERRDOS, 2142, NT_STATUS_INVALID_SYSTEM_SERVICE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ILLEGAL_INSTRUCTION}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_INVALID_LOCK_SEQUENCE}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_INVALID_VIEW_SIZE}, {
-+	ERRDOS, 193, NT_STATUS_INVALID_FILE_FOR_SECTION}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_ALREADY_COMMITTED},
-+/*	{ This NT error code was 'sqashed'
-+	 from NT_STATUS_ACCESS_DENIED to NT_STATUS_TRUSTED_RELATIONSHIP_FAILURE 
-+	 during the session setup }   */
-+	{
-+	ERRDOS, ERRnoaccess, NT_STATUS_ACCESS_DENIED}, {
-+	ERRDOS, 111, NT_STATUS_BUFFER_TOO_SMALL}, {
-+	ERRDOS, ERRbadfid, NT_STATUS_OBJECT_TYPE_MISMATCH}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NONCONTINUABLE_EXCEPTION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_DISPOSITION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNWIND}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BAD_STACK}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_UNWIND_TARGET}, {
-+	ERRDOS, 158, NT_STATUS_NOT_LOCKED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PARITY_ERROR}, {
-+	ERRDOS, 487, NT_STATUS_UNABLE_TO_DECOMMIT_VM}, {
-+	ERRDOS, 487, NT_STATUS_NOT_COMMITTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_PORT_ATTRIBUTES}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PORT_MESSAGE_TOO_LONG}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_MIX}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_QUOTA_LOWER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DISK_CORRUPT_ERROR}, {
-+	ERRDOS, ERRbadfile, NT_STATUS_OBJECT_NAME_INVALID}, {	/* mapping changed since shell does lookup on * and expects file not found */
-+	ERRDOS, ERRbadfile, NT_STATUS_OBJECT_NAME_NOT_FOUND}, {
-+	ERRDOS, ERRalreadyexists, NT_STATUS_OBJECT_NAME_COLLISION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_HANDLE_NOT_WAITABLE}, {
-+	ERRDOS, ERRbadfid, NT_STATUS_PORT_DISCONNECTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DEVICE_ALREADY_ATTACHED}, {
-+	ERRDOS, 161, NT_STATUS_OBJECT_PATH_INVALID}, {
-+	ERRDOS, ERRbadpath, NT_STATUS_OBJECT_PATH_NOT_FOUND}, {
-+	ERRDOS, 161, NT_STATUS_OBJECT_PATH_SYNTAX_BAD}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DATA_OVERRUN}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DATA_LATE_ERROR}, {
-+	ERRDOS, 23, NT_STATUS_DATA_ERROR}, {
-+	ERRDOS, 23, NT_STATUS_CRC_ERROR}, {
-+	ERRDOS, ERRnomem, NT_STATUS_SECTION_TOO_BIG}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_PORT_CONNECTION_REFUSED}, {
-+	ERRDOS, ERRbadfid, NT_STATUS_INVALID_PORT_HANDLE}, {
-+	ERRDOS, ERRbadshare, NT_STATUS_SHARING_VIOLATION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_QUOTA_EXCEEDED}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PAGE_PROTECTION}, {
-+	ERRDOS, 288, NT_STATUS_MUTANT_NOT_OWNED}, {
-+	ERRDOS, 298, NT_STATUS_SEMAPHORE_LIMIT_EXCEEDED}, {
-+	ERRDOS, 87, NT_STATUS_PORT_ALREADY_SET}, {
-+	ERRDOS, 87, NT_STATUS_SECTION_NOT_IMAGE}, {
-+	ERRDOS, 156, NT_STATUS_SUSPEND_COUNT_EXCEEDED}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_THREAD_IS_TERMINATING}, {
-+	ERRDOS, 87, NT_STATUS_BAD_WORKING_SET_LIMIT}, {
-+	ERRDOS, 87, NT_STATUS_INCOMPATIBLE_FILE_MAP}, {
-+	ERRDOS, 87, NT_STATUS_SECTION_PROTECTION}, {
-+	ERRDOS, 282, NT_STATUS_EAS_NOT_SUPPORTED}, {
-+	ERRDOS, 255, NT_STATUS_EA_TOO_LARGE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NONEXISTENT_EA_ENTRY}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_EAS_ON_FILE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_EA_CORRUPT_ERROR}, {
-+	ERRDOS, ERRlock, NT_STATUS_FILE_LOCK_CONFLICT}, {
-+	ERRDOS, ERRlock, NT_STATUS_LOCK_NOT_GRANTED}, {
-+	ERRDOS, ERRbadfile, NT_STATUS_DELETE_PENDING}, {
-+	ERRDOS, ERRunsup, NT_STATUS_CTL_FILE_NOT_SUPPORTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNKNOWN_REVISION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_REVISION_MISMATCH}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_OWNER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_PRIMARY_GROUP}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_IMPERSONATION_TOKEN}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CANT_DISABLE_MANDATORY}, {
-+	ERRDOS, 2215, NT_STATUS_NO_LOGON_SERVERS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_SUCH_LOGON_SESSION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_SUCH_PRIVILEGE}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_PRIVILEGE_NOT_HELD}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_ACCOUNT_NAME}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_USER_EXISTS},
-+/*	{ This NT error code was 'sqashed'
-+	 from NT_STATUS_NO_SUCH_USER to NT_STATUS_LOGON_FAILURE 
-+	 during the session setup } */
-+	{
-+	ERRDOS, ERRnoaccess, NT_STATUS_NO_SUCH_USER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_GROUP_EXISTS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_SUCH_GROUP}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_MEMBER_IN_GROUP}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_MEMBER_NOT_IN_GROUP}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LAST_ADMIN},
-+/*	{ This NT error code was 'sqashed'
-+	 from NT_STATUS_WRONG_PASSWORD to NT_STATUS_LOGON_FAILURE 
-+	 during the session setup } */
-+	{
-+	ERRSRV, ERRbadpw, NT_STATUS_WRONG_PASSWORD}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ILL_FORMED_PASSWORD}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PASSWORD_RESTRICTION}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_LOGON_FAILURE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ACCOUNT_RESTRICTION}, {
-+	ERRSRV, 2241, NT_STATUS_INVALID_LOGON_HOURS}, {
-+	ERRSRV, 2240, NT_STATUS_INVALID_WORKSTATION}, {
-+	ERRSRV, 2242, NT_STATUS_PASSWORD_EXPIRED}, {
-+	ERRSRV, 2239, NT_STATUS_ACCOUNT_DISABLED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NONE_MAPPED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_TOO_MANY_LUIDS_REQUESTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LUIDS_EXHAUSTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_SUB_AUTHORITY}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_ACL}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_SID}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_SECURITY_DESCR}, {
-+	ERRDOS, 127, NT_STATUS_PROCEDURE_NOT_FOUND}, {
-+	ERRDOS, 193, NT_STATUS_INVALID_IMAGE_FORMAT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_TOKEN}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BAD_INHERITANCE_ACL}, {
-+	ERRDOS, 158, NT_STATUS_RANGE_NOT_LOCKED}, {
-+	ERRDOS, 112, NT_STATUS_DISK_FULL}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_SERVER_DISABLED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_SERVER_NOT_DISABLED}, {
-+	ERRDOS, 68, NT_STATUS_TOO_MANY_GUIDS_REQUESTED}, {
-+	ERRDOS, 259, NT_STATUS_GUIDS_EXHAUSTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_ID_AUTHORITY}, {
-+	ERRDOS, 259, NT_STATUS_AGENTS_EXHAUSTED}, {
-+	ERRDOS, 154, NT_STATUS_INVALID_VOLUME_LABEL}, {
-+	ERRDOS, 14, NT_STATUS_SECTION_NOT_EXTENDED}, {
-+	ERRDOS, 487, NT_STATUS_NOT_MAPPED_DATA}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_RESOURCE_DATA_NOT_FOUND}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_RESOURCE_TYPE_NOT_FOUND}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_RESOURCE_NAME_NOT_FOUND}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ARRAY_BOUNDS_EXCEEDED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FLOAT_DENORMAL_OPERAND}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FLOAT_DIVIDE_BY_ZERO}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FLOAT_INEXACT_RESULT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FLOAT_INVALID_OPERATION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FLOAT_OVERFLOW}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FLOAT_STACK_CHECK}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FLOAT_UNDERFLOW}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INTEGER_DIVIDE_BY_ZERO}, {
-+	ERRDOS, 534, NT_STATUS_INTEGER_OVERFLOW}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PRIVILEGED_INSTRUCTION}, {
-+	ERRDOS, ERRnomem, NT_STATUS_TOO_MANY_PAGING_FILES}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FILE_INVALID}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ALLOTTED_SPACE_EXCEEDED},
-+/*	{ This NT error code was 'sqashed'
-+	 from NT_STATUS_INSUFFICIENT_RESOURCES to NT_STATUS_INSUFF_SERVER_RESOURCES 
-+	 during the session setup } */
-+	{
-+	ERRDOS, ERRnomem, NT_STATUS_INSUFFICIENT_RESOURCES}, {
-+	ERRDOS, ERRbadpath, NT_STATUS_DFS_EXIT_PATH_FOUND}, {
-+	ERRDOS, 23, NT_STATUS_DEVICE_DATA_ERROR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DEVICE_NOT_CONNECTED}, {
-+	ERRDOS, 21, NT_STATUS_DEVICE_POWER_FAILURE}, {
-+	ERRDOS, 487, NT_STATUS_FREE_VM_NOT_AT_BASE}, {
-+	ERRDOS, 487, NT_STATUS_MEMORY_NOT_ALLOCATED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_WORKING_SET_QUOTA}, {
-+	ERRDOS, 19, NT_STATUS_MEDIA_WRITE_PROTECTED}, {
-+	ERRDOS, 21, NT_STATUS_DEVICE_NOT_READY}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_GROUP_ATTRIBUTES}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BAD_IMPERSONATION_LEVEL}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CANT_OPEN_ANONYMOUS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BAD_VALIDATION_CLASS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BAD_TOKEN_TYPE}, {
-+	ERRDOS, 87, NT_STATUS_BAD_MASTER_BOOT_RECORD}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INSTRUCTION_MISALIGNMENT}, {
-+	ERRDOS, ERRpipebusy, NT_STATUS_INSTANCE_NOT_AVAILABLE}, {
-+	ERRDOS, ERRpipebusy, NT_STATUS_PIPE_NOT_AVAILABLE}, {
-+	ERRDOS, ERRbadpipe, NT_STATUS_INVALID_PIPE_STATE}, {
-+	ERRDOS, ERRpipebusy, NT_STATUS_PIPE_BUSY}, {
-+	ERRDOS, ERRbadfunc, NT_STATUS_ILLEGAL_FUNCTION}, {
-+	ERRDOS, ERRnotconnected, NT_STATUS_PIPE_DISCONNECTED}, {
-+	ERRDOS, ERRpipeclosing, NT_STATUS_PIPE_CLOSING}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PIPE_CONNECTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PIPE_LISTENING}, {
-+	ERRDOS, ERRbadpipe, NT_STATUS_INVALID_READ_MODE}, {
-+	ERRDOS, 121, NT_STATUS_IO_TIMEOUT}, {
-+	ERRDOS, 38, NT_STATUS_FILE_FORCED_CLOSED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PROFILING_NOT_STARTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PROFILING_NOT_STOPPED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_COULD_NOT_INTERPRET}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_FILE_IS_A_DIRECTORY}, {
-+	ERRDOS, ERRunsup, NT_STATUS_NOT_SUPPORTED}, {
-+	ERRDOS, 51, NT_STATUS_REMOTE_NOT_LISTENING}, {
-+	ERRDOS, 52, NT_STATUS_DUPLICATE_NAME}, {
-+	ERRDOS, 53, NT_STATUS_BAD_NETWORK_PATH}, {
-+	ERRDOS, 54, NT_STATUS_NETWORK_BUSY}, {
-+	ERRDOS, 55, NT_STATUS_DEVICE_DOES_NOT_EXIST}, {
-+	ERRDOS, 56, NT_STATUS_TOO_MANY_COMMANDS}, {
-+	ERRDOS, 57, NT_STATUS_ADAPTER_HARDWARE_ERROR}, {
-+	ERRDOS, 58, NT_STATUS_INVALID_NETWORK_RESPONSE}, {
-+	ERRDOS, 59, NT_STATUS_UNEXPECTED_NETWORK_ERROR}, {
-+	ERRDOS, 60, NT_STATUS_BAD_REMOTE_ADAPTER}, {
-+	ERRDOS, 61, NT_STATUS_PRINT_QUEUE_FULL}, {
-+	ERRDOS, 62, NT_STATUS_NO_SPOOL_SPACE}, {
-+	ERRDOS, 63, NT_STATUS_PRINT_CANCELLED}, {
-+	ERRDOS, 64, NT_STATUS_NETWORK_NAME_DELETED}, {
-+	ERRDOS, 65, NT_STATUS_NETWORK_ACCESS_DENIED}, {
-+	ERRDOS, 66, NT_STATUS_BAD_DEVICE_TYPE}, {
-+	ERRDOS, ERRnosuchshare, NT_STATUS_BAD_NETWORK_NAME}, {
-+	ERRDOS, 68, NT_STATUS_TOO_MANY_NAMES}, {
-+	ERRDOS, 69, NT_STATUS_TOO_MANY_SESSIONS}, {
-+	ERRDOS, 70, NT_STATUS_SHARING_PAUSED}, {
-+	ERRDOS, 71, NT_STATUS_REQUEST_NOT_ACCEPTED}, {
-+	ERRDOS, 72, NT_STATUS_REDIRECTOR_PAUSED}, {
-+	ERRDOS, 88, NT_STATUS_NET_WRITE_FAULT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PROFILING_AT_LIMIT}, {
-+	ERRDOS, ERRdiffdevice, NT_STATUS_NOT_SAME_DEVICE}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_FILE_RENAMED}, {
-+	ERRDOS, 240, NT_STATUS_VIRTUAL_CIRCUIT_CLOSED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_SECURITY_ON_OBJECT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CANT_WAIT}, {
-+	ERRDOS, ERRpipeclosing, NT_STATUS_PIPE_EMPTY}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CANT_ACCESS_DOMAIN_INFO}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CANT_TERMINATE_SELF}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_SERVER_STATE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_DOMAIN_STATE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_DOMAIN_ROLE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_SUCH_DOMAIN}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DOMAIN_EXISTS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DOMAIN_LIMIT_EXCEEDED}, {
-+	ERRDOS, 300, NT_STATUS_OPLOCK_NOT_GRANTED}, {
-+	ERRDOS, 301, NT_STATUS_INVALID_OPLOCK_PROTOCOL}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INTERNAL_DB_CORRUPTION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INTERNAL_ERROR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_GENERIC_NOT_MAPPED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BAD_DESCRIPTOR_FORMAT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_USER_BUFFER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNEXPECTED_IO_ERROR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNEXPECTED_MM_CREATE_ERR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNEXPECTED_MM_MAP_ERROR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNEXPECTED_MM_EXTEND_ERR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NOT_LOGON_PROCESS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LOGON_SESSION_EXISTS}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_1}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_2}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_3}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_4}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_5}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_6}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_7}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_8}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_9}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_10}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_11}, {
-+	ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_12}, {
-+	ERRDOS, ERRbadpath, NT_STATUS_REDIRECTOR_NOT_STARTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_REDIRECTOR_STARTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_STACK_OVERFLOW}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_SUCH_PACKAGE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BAD_FUNCTION_TABLE}, {
-+	ERRDOS, 203, 0xc0000100}, {
-+	ERRDOS, 145, NT_STATUS_DIRECTORY_NOT_EMPTY}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FILE_CORRUPT_ERROR}, {
-+	ERRDOS, 267, NT_STATUS_NOT_A_DIRECTORY}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BAD_LOGON_SESSION_STATE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LOGON_SESSION_COLLISION}, {
-+	ERRDOS, 206, NT_STATUS_NAME_TOO_LONG}, {
-+	ERRDOS, 2401, NT_STATUS_FILES_OPEN}, {
-+	ERRDOS, 2404, NT_STATUS_CONNECTION_IN_USE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_MESSAGE_NOT_FOUND}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_PROCESS_IS_TERMINATING}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_LOGON_TYPE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_GUID_TRANSLATION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CANNOT_IMPERSONATE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_IMAGE_ALREADY_LOADED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ABIOS_NOT_PRESENT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ABIOS_LID_NOT_EXIST}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ABIOS_LID_ALREADY_OWNED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ABIOS_NOT_LID_OWNER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ABIOS_INVALID_COMMAND}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ABIOS_INVALID_LID}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ABIOS_SELECTOR_NOT_AVAILABLE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ABIOS_INVALID_SELECTOR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_LDT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_LDT_SIZE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_LDT_OFFSET}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_LDT_DESCRIPTOR}, {
-+	ERRDOS, 193, NT_STATUS_INVALID_IMAGE_NE_FORMAT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_RXACT_INVALID_STATE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_RXACT_COMMIT_FAILURE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_MAPPED_FILE_SIZE_ZERO}, {
-+	ERRDOS, ERRnofids, NT_STATUS_TOO_MANY_OPENED_FILES}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CANCELLED}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_CANNOT_DELETE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_COMPUTER_NAME}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_FILE_DELETED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_SPECIAL_ACCOUNT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_SPECIAL_GROUP}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_SPECIAL_USER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_MEMBERS_PRIMARY_GROUP}, {
-+	ERRDOS, ERRbadfid, NT_STATUS_FILE_CLOSED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_TOO_MANY_THREADS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_THREAD_NOT_IN_PROCESS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_TOKEN_ALREADY_IN_USE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PAGEFILE_QUOTA_EXCEEDED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_COMMITMENT_LIMIT}, {
-+	ERRDOS, 193, NT_STATUS_INVALID_IMAGE_LE_FORMAT}, {
-+	ERRDOS, 193, NT_STATUS_INVALID_IMAGE_NOT_MZ}, {
-+	ERRDOS, 193, NT_STATUS_INVALID_IMAGE_PROTECT}, {
-+	ERRDOS, 193, NT_STATUS_INVALID_IMAGE_WIN_16}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LOGON_SERVER_CONFLICT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_TIME_DIFFERENCE_AT_DC}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_SYNCHRONIZATION_REQUIRED}, {
-+	ERRDOS, 126, NT_STATUS_DLL_NOT_FOUND}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_OPEN_FAILED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_IO_PRIVILEGE_FAILED}, {
-+	ERRDOS, 182, NT_STATUS_ORDINAL_NOT_FOUND}, {
-+	ERRDOS, 127, NT_STATUS_ENTRYPOINT_NOT_FOUND}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CONTROL_C_EXIT}, {
-+	ERRDOS, 64, NT_STATUS_LOCAL_DISCONNECT}, {
-+	ERRDOS, 64, NT_STATUS_REMOTE_DISCONNECT}, {
-+	ERRDOS, 51, NT_STATUS_REMOTE_RESOURCES}, {
-+	ERRDOS, 59, NT_STATUS_LINK_FAILED}, {
-+	ERRDOS, 59, NT_STATUS_LINK_TIMEOUT}, {
-+	ERRDOS, 59, NT_STATUS_INVALID_CONNECTION}, {
-+	ERRDOS, 59, NT_STATUS_INVALID_ADDRESS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DLL_INIT_FAILED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_MISSING_SYSTEMFILE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNHANDLED_EXCEPTION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_APP_INIT_FAILURE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PAGEFILE_CREATE_FAILED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_PAGEFILE}, {
-+	ERRDOS, 124, NT_STATUS_INVALID_LEVEL}, {
-+	ERRDOS, 86, NT_STATUS_WRONG_PASSWORD_CORE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ILLEGAL_FLOAT_CONTEXT}, {
-+	ERRDOS, 109, NT_STATUS_PIPE_BROKEN}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_REGISTRY_CORRUPT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_REGISTRY_IO_FAILED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_EVENT_PAIR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNRECOGNIZED_VOLUME}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_SERIAL_NO_DEVICE_INITED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_SUCH_ALIAS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_MEMBER_NOT_IN_ALIAS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_MEMBER_IN_ALIAS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ALIAS_EXISTS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LOGON_NOT_GRANTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_TOO_MANY_SECRETS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_SECRET_TOO_LONG}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INTERNAL_DB_ERROR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FULLSCREEN_MODE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_TOO_MANY_CONTEXT_IDS}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_LOGON_TYPE_NOT_GRANTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NOT_REGISTRY_FILE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NT_CROSS_ENCRYPTION_REQUIRED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DOMAIN_CTRLR_CONFIG_ERROR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FT_MISSING_MEMBER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ILL_FORMED_SERVICE_ENTRY}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ILLEGAL_CHARACTER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNMAPPABLE_CHARACTER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNDEFINED_CHARACTER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FLOPPY_VOLUME}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FLOPPY_ID_MARK_NOT_FOUND}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FLOPPY_WRONG_CYLINDER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FLOPPY_UNKNOWN_ERROR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FLOPPY_BAD_REGISTERS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DISK_RECALIBRATE_FAILED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DISK_OPERATION_FAILED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DISK_RESET_FAILED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_SHARED_IRQ_BUSY}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FT_ORPHANING}, {
-+	ERRHRD, ERRgeneral, 0xc000016e}, {
-+	ERRHRD, ERRgeneral, 0xc000016f}, {
-+	ERRHRD, ERRgeneral, 0xc0000170}, {
-+	ERRHRD, ERRgeneral, 0xc0000171}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PARTITION_FAILURE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_BLOCK_LENGTH}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DEVICE_NOT_PARTITIONED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNABLE_TO_LOCK_MEDIA}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNABLE_TO_UNLOAD_MEDIA}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_EOM_OVERFLOW}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_MEDIA}, {
-+	ERRHRD, ERRgeneral, 0xc0000179}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_SUCH_MEMBER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_MEMBER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_KEY_DELETED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_LOG_SPACE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_TOO_MANY_SIDS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LM_CROSS_ENCRYPTION_REQUIRED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_KEY_HAS_CHILDREN}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CHILD_MUST_BE_VOLATILE}, {
-+	ERRDOS, 87, NT_STATUS_DEVICE_CONFIGURATION_ERROR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DRIVER_INTERNAL_ERROR}, {
-+	ERRDOS, 22, NT_STATUS_INVALID_DEVICE_STATE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_IO_DEVICE_ERROR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DEVICE_PROTOCOL_ERROR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BACKUP_CONTROLLER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LOG_FILE_FULL}, {
-+	ERRDOS, 19, NT_STATUS_TOO_LATE}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_NO_TRUST_LSA_SECRET},
-+/*	{ This NT error code was 'sqashed'
-+	 from NT_STATUS_NO_TRUST_SAM_ACCOUNT to NT_STATUS_TRUSTED_RELATIONSHIP_FAILURE 
-+	 during the session setup } */
-+	{
-+	ERRDOS, ERRnoaccess, NT_STATUS_NO_TRUST_SAM_ACCOUNT}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_TRUSTED_DOMAIN_FAILURE}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_TRUSTED_RELATIONSHIP_FAILURE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_EVENTLOG_FILE_CORRUPT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_EVENTLOG_CANT_START}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_TRUST_FAILURE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_MUTANT_LIMIT_EXCEEDED}, {
-+	ERRDOS, ERRnetlogonNotStarted, NT_STATUS_NETLOGON_NOT_STARTED}, {
-+	ERRSRV, 2239, NT_STATUS_ACCOUNT_EXPIRED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_POSSIBLE_DEADLOCK}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NETWORK_CREDENTIAL_CONFLICT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_REMOTE_SESSION_LIMIT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_EVENTLOG_FILE_CHANGED}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_NOLOGON_SERVER_TRUST_ACCOUNT},
-+/*	{ This NT error code was 'sqashed'
-+	 from NT_STATUS_DOMAIN_TRUST_INCONSISTENT to NT_STATUS_LOGON_FAILURE 
-+	 during the session setup }  */
-+	{
-+	ERRDOS, ERRnoaccess, NT_STATUS_DOMAIN_TRUST_INCONSISTENT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FS_DRIVER_REQUIRED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_USER_SESSION_KEY}, {
-+	ERRDOS, 59, NT_STATUS_USER_SESSION_DELETED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_RESOURCE_LANG_NOT_FOUND}, {
-+	ERRDOS, ERRnomem, NT_STATUS_INSUFF_SERVER_RESOURCES}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_BUFFER_SIZE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_ADDRESS_COMPONENT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_ADDRESS_WILDCARD}, {
-+	ERRDOS, 68, NT_STATUS_TOO_MANY_ADDRESSES}, {
-+	ERRDOS, 52, NT_STATUS_ADDRESS_ALREADY_EXISTS}, {
-+	ERRDOS, 64, NT_STATUS_ADDRESS_CLOSED}, {
-+	ERRDOS, 64, NT_STATUS_CONNECTION_DISCONNECTED}, {
-+	ERRDOS, 64, NT_STATUS_CONNECTION_RESET}, {
-+	ERRDOS, 68, NT_STATUS_TOO_MANY_NODES}, {
-+	ERRDOS, 59, NT_STATUS_TRANSACTION_ABORTED}, {
-+	ERRDOS, 59, NT_STATUS_TRANSACTION_TIMED_OUT}, {
-+	ERRDOS, 59, NT_STATUS_TRANSACTION_NO_RELEASE}, {
-+	ERRDOS, 59, NT_STATUS_TRANSACTION_NO_MATCH}, {
-+	ERRDOS, 59, NT_STATUS_TRANSACTION_RESPONDED}, {
-+	ERRDOS, 59, NT_STATUS_TRANSACTION_INVALID_ID}, {
-+	ERRDOS, 59, NT_STATUS_TRANSACTION_INVALID_TYPE}, {
-+	ERRDOS, ERRunsup, NT_STATUS_NOT_SERVER_SESSION}, {
-+	ERRDOS, ERRunsup, NT_STATUS_NOT_CLIENT_SESSION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CANNOT_LOAD_REGISTRY_FILE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DEBUG_ATTACH_FAILED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_SYSTEM_PROCESS_TERMINATED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DATA_NOT_ACCEPTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_BROWSER_SERVERS_FOUND}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_VDM_HARD_ERROR}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DRIVER_CANCEL_TIMEOUT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_REPLY_MESSAGE_MISMATCH}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_MAPPED_ALIGNMENT}, {
-+	ERRDOS, 193, NT_STATUS_IMAGE_CHECKSUM_MISMATCH}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LOST_WRITEBEHIND_DATA}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CLIENT_SERVER_PARAMETERS_INVALID}, {
-+	ERRSRV, 2242, NT_STATUS_PASSWORD_MUST_CHANGE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NOT_FOUND}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NOT_TINY_STREAM}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_RECOVERY_FAILURE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_STACK_OVERFLOW_READ}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FAIL_CHECK}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DUPLICATE_OBJECTID}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_OBJECTID_EXISTS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CONVERT_TO_LARGE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_RETRY}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FOUND_OUT_OF_SCOPE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ALLOCATE_BUCKET}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PROPSET_NOT_FOUND}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_MARSHALL_OVERFLOW}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_VARIANT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_DOMAIN_CONTROLLER_NOT_FOUND}, {
-+	ERRDOS, ERRnoaccess, NT_STATUS_ACCOUNT_LOCKED_OUT}, {
-+	ERRDOS, ERRbadfid, NT_STATUS_HANDLE_NOT_CLOSABLE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CONNECTION_REFUSED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_GRACEFUL_DISCONNECT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ADDRESS_ALREADY_ASSOCIATED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_ADDRESS_NOT_ASSOCIATED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CONNECTION_INVALID}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CONNECTION_ACTIVE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NETWORK_UNREACHABLE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_HOST_UNREACHABLE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PROTOCOL_UNREACHABLE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PORT_UNREACHABLE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_REQUEST_ABORTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CONNECTION_ABORTED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BAD_COMPRESSION_BUFFER}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_USER_MAPPED_FILE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_AUDIT_FAILED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_TIMER_RESOLUTION_NOT_SET}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_CONNECTION_COUNT_LIMIT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LOGIN_TIME_RESTRICTION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LOGIN_WKSTA_RESTRICTION}, {
-+	ERRDOS, 193, NT_STATUS_IMAGE_MP_UP_MISMATCH}, {
-+	ERRHRD, ERRgeneral, 0xc000024a}, {
-+	ERRHRD, ERRgeneral, 0xc000024b}, {
-+	ERRHRD, ERRgeneral, 0xc000024c}, {
-+	ERRHRD, ERRgeneral, 0xc000024d}, {
-+	ERRHRD, ERRgeneral, 0xc000024e}, {
-+	ERRHRD, ERRgeneral, 0xc000024f}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INSUFFICIENT_LOGON_INFO}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BAD_DLL_ENTRYPOINT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_BAD_SERVICE_ENTRYPOINT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LPC_REPLY_LOST}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_IP_ADDRESS_CONFLICT1}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_IP_ADDRESS_CONFLICT2}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_REGISTRY_QUOTA_LIMIT}, {
-+	ERRSRV, 3, NT_STATUS_PATH_NOT_COVERED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_NO_CALLBACK_ACTIVE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_LICENSE_QUOTA_EXCEEDED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PWD_TOO_SHORT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PWD_TOO_RECENT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PWD_HISTORY_CONFLICT}, {
-+	ERRHRD, ERRgeneral, 0xc000025d}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_PLUGPLAY_NO_DEVICE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_UNSUPPORTED_COMPRESSION}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_HW_PROFILE}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_INVALID_PLUGPLAY_DEVICE_PATH}, {
-+	ERRDOS, 182, NT_STATUS_DRIVER_ORDINAL_NOT_FOUND}, {
-+	ERRDOS, 127, NT_STATUS_DRIVER_ENTRYPOINT_NOT_FOUND}, {
-+	ERRDOS, 288, NT_STATUS_RESOURCE_NOT_OWNED}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_TOO_MANY_LINKS}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_QUOTA_LIST_INCONSISTENT}, {
-+	ERRHRD, ERRgeneral, NT_STATUS_FILE_IS_OFFLINE}, {
-+	ERRDOS, 21, 0xc000026e}, {
-+	ERRDOS, 161, 0xc0000281}, {
-+	ERRDOS, ERRnoaccess, 0xc000028a}, {
-+	ERRDOS, ERRnoaccess, 0xc000028b}, {
-+	ERRHRD, ERRgeneral, 0xc000028c}, {
-+	ERRDOS, ERRnoaccess, 0xc000028d}, {
-+	ERRDOS, ERRnoaccess, 0xc000028e}, {
-+	ERRDOS, ERRnoaccess, 0xc000028f}, {
-+	ERRDOS, ERRnoaccess, 0xc0000290}, {
-+ERRDOS, ERRbadfunc, 0xc000029c},};
-+
-+/*****************************************************************************
-+ Print an error message from the status code
-+ *****************************************************************************/
-+static void
-+cifs_print_status(__u32 status_code)
-+{
-+	int idx = 0;
-+
-+	while (nt_errs[idx].nt_errstr != NULL) {
-+		if (((nt_errs[idx].nt_errcode) & 0xFFFFFF) ==
-+		    (status_code & 0xFFFFFF)) {
-+			printk(KERN_NOTICE "Status code returned 0x%08x %s\n",
-+				   status_code,nt_errs[idx].nt_errstr);
-+		}
-+		idx++;
-+	}
-+	return;
-+}
-+
-+
-+static void
-+ntstatus_to_dos(__u32 ntstatus, __u8 * eclass, __u16 * ecode)
-+{
-+	int i;
-+	if (ntstatus == 0) {
-+		*eclass = 0;
-+		*ecode = 0;
-+		return;
-+	}
-+	for (i = 0; ntstatus_to_dos_map[i].ntstatus; i++) {
-+		if (ntstatus == ntstatus_to_dos_map[i].ntstatus) {
-+			*eclass = ntstatus_to_dos_map[i].dos_class;
-+			*ecode = ntstatus_to_dos_map[i].dos_code;
-+			return;
-+		}
-+	}
-+	*eclass = ERRHRD;
-+	*ecode = ERRgeneral;
-+}
-+
-+int
-+map_smb_to_linux_error(struct smb_hdr *smb)
-+{
-+	unsigned int i;
-+	int rc = -EIO;		/* if transport error smb error may not be set */
-+	__u8 smberrclass;
-+	__u16 smberrcode;
-+
-+	/* BB if NT Status codes - map NT BB */
-+
-+	/* old style smb error codes */
-+	if (smb->Status.CifsError == 0)
-+		return 0;
-+
-+	if (smb->Flags2 & SMBFLG2_ERR_STATUS) {
-+		/* translate the newer STATUS codes to old style errors and then to POSIX errors */
-+		smb->Status.CifsError = le32_to_cpu(smb->Status.CifsError);
-+		if(cifsFYI)
-+			cifs_print_status(smb->Status.CifsError);
-+		ntstatus_to_dos(smb->Status.CifsError, &smberrclass,
-+				&smberrcode);
-+	} else {
-+		smberrclass = smb->Status.DosError.ErrorClass;
-+		smb->Status.DosError.Error =
-+		    le16_to_cpu(smb->Status.DosError.Error);
-+		smberrcode = smb->Status.DosError.Error;
-+	}
-+
-+	/* old style errors */
-+
-+	/* DOS class smb error codes - map DOS */
-+	if (smberrclass == ERRDOS) {	/* one byte field no need to byte reverse */
-+		for (i = 0;
-+		     i <
-+		     sizeof (mapping_table_ERRDOS) /
-+		     sizeof (struct smb_to_posix_error); i++) {
-+			if (mapping_table_ERRDOS[i].smb_err == 0)
-+				break;
-+			else if (mapping_table_ERRDOS[i].smb_err == smberrcode) {
-+				rc = mapping_table_ERRDOS[i].posix_code;
-+				break;
-+			}
-+			/* else try the next error mapping one to see if it will match */
-+		}
-+	} else if (smberrclass == ERRSRV) {	/* server class of error codes */
-+		for (i = 0;
-+		     i <
-+		     sizeof (mapping_table_ERRSRV) /
-+		     sizeof (struct smb_to_posix_error); i++) {
-+			if (mapping_table_ERRSRV[i].smb_err == 0)
-+				break;
-+			else if (mapping_table_ERRSRV[i].smb_err == smberrcode) {
-+				rc = mapping_table_ERRSRV[i].posix_code;
-+				break;
-+			}
-+			/* else try the next error mapping one to see if it will match */
-+		}
-+	}
-+	/* else ERRHRD class errors or junk  - return EIO */
-+
-+	cFYI(1, (" !!Mapping smb error code %d to POSIX err %d !!", smberrcode,rc));
-+
-+	/* generic corrective action e.g. reconnect SMB session on ERRbaduid could be added */
-+
-+	return rc;
-+}
-+
-+/*
-+ * calculate the size of the SMB message based on the fixed header
-+ * portion, the number of word parameters and the data portion of the message
-+ */
-+unsigned int
-+smbCalcSize(struct smb_hdr *ptr)
-+{
-+	return (sizeof (struct smb_hdr) + (2 * ptr->WordCount) +
-+		BCC(ptr));
-+}
-+
-+/* The following are taken from fs/ntfs/util.c */
-+
-+#define NTFS_TIME_OFFSET ((u64)(369*365 + 89) * 24 * 3600 * 10000000)
-+
-+    /*
-+     * Convert the NT UTC (based 1601-01-01, in hundred nanosecond units)
-+     * into Unix UTC (based 1970-01-01, in seconds).
-+     */
-+time_t
-+cifs_NTtimeToUnix(__u64 ntutc)
-+{
-+	/* BB what about the timezone? BB */
-+
-+	/* Subtract the NTFS time offset, then convert to 1s intervals. */
-+	u64 t;
-+
-+	t = ntutc - NTFS_TIME_OFFSET;
-+	do_div(t, 10000000);
-+	return (time_t)t;
-+}
-+
-+/* Convert the Unix UTC into NT UTC. */
-+__u64
-+cifs_UnixTimeToNT(time_t t)
-+{
-+	__u64 dce_time;
-+   /* Convert to 100ns intervals and then add the NTFS time offset. */
-+	dce_time = (__u64) t * 10000000;
-+	dce_time += NTFS_TIME_OFFSET;
-+	return dce_time;
-+}
-diff -urN linux-2.4.29.old/fs/cifs/nterr.c linux-2.4.29/fs/cifs/nterr.c
---- linux-2.4.29.old/fs/cifs/nterr.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/nterr.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,687 @@
-+/* 
-+ *  Unix SMB/Netbios implementation.
-+ *  Version 1.9.
-+ *  RPC Pipe client / server routines
-+ *  Copyright (C) Luke Kenneth Casson Leighton 1997-2001.
-+ *  
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *  
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *  
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+/* NT error codes - see nterr.h */
-+#include <linux/types.h>
-+#include <linux/fs.h>
-+#include "nterr.h"
-+
-+const struct nt_err_code_struct nt_errs[] = {
-+	{"NT_STATUS_OK", NT_STATUS_OK},
-+	{"NT_STATUS_UNSUCCESSFUL", NT_STATUS_UNSUCCESSFUL},
-+	{"NT_STATUS_NOT_IMPLEMENTED", NT_STATUS_NOT_IMPLEMENTED},
-+	{"NT_STATUS_INVALID_INFO_CLASS", NT_STATUS_INVALID_INFO_CLASS},
-+	{"NT_STATUS_INFO_LENGTH_MISMATCH", NT_STATUS_INFO_LENGTH_MISMATCH},
-+	{"NT_STATUS_ACCESS_VIOLATION", NT_STATUS_ACCESS_VIOLATION},
-+	{"STATUS_BUFFER_OVERFLOW", STATUS_BUFFER_OVERFLOW},
-+	{"NT_STATUS_IN_PAGE_ERROR", NT_STATUS_IN_PAGE_ERROR},
-+	{"NT_STATUS_PAGEFILE_QUOTA", NT_STATUS_PAGEFILE_QUOTA},
-+	{"NT_STATUS_INVALID_HANDLE", NT_STATUS_INVALID_HANDLE},
-+	{"NT_STATUS_BAD_INITIAL_STACK", NT_STATUS_BAD_INITIAL_STACK},
-+	{"NT_STATUS_BAD_INITIAL_PC", NT_STATUS_BAD_INITIAL_PC},
-+	{"NT_STATUS_INVALID_CID", NT_STATUS_INVALID_CID},
-+	{"NT_STATUS_TIMER_NOT_CANCELED", NT_STATUS_TIMER_NOT_CANCELED},
-+	{"NT_STATUS_INVALID_PARAMETER", NT_STATUS_INVALID_PARAMETER},
-+	{"NT_STATUS_NO_SUCH_DEVICE", NT_STATUS_NO_SUCH_DEVICE},
-+	{"NT_STATUS_NO_SUCH_FILE", NT_STATUS_NO_SUCH_FILE},
-+	{"NT_STATUS_INVALID_DEVICE_REQUEST",
-+	 NT_STATUS_INVALID_DEVICE_REQUEST},
-+	{"NT_STATUS_END_OF_FILE", NT_STATUS_END_OF_FILE},
-+	{"NT_STATUS_WRONG_VOLUME", NT_STATUS_WRONG_VOLUME},
-+	{"NT_STATUS_NO_MEDIA_IN_DEVICE", NT_STATUS_NO_MEDIA_IN_DEVICE},
-+	{"NT_STATUS_UNRECOGNIZED_MEDIA", NT_STATUS_UNRECOGNIZED_MEDIA},
-+	{"NT_STATUS_NONEXISTENT_SECTOR", NT_STATUS_NONEXISTENT_SECTOR},
-+	{"NT_STATUS_MORE_PROCESSING_REQUIRED",
-+	 NT_STATUS_MORE_PROCESSING_REQUIRED},
-+	{"NT_STATUS_NO_MEMORY", NT_STATUS_NO_MEMORY},
-+	{"NT_STATUS_CONFLICTING_ADDRESSES",
-+	 NT_STATUS_CONFLICTING_ADDRESSES},
-+	{"NT_STATUS_NOT_MAPPED_VIEW", NT_STATUS_NOT_MAPPED_VIEW},
-+	{"NT_STATUS_UNABLE_TO_FREE_VM", NT_STATUS_UNABLE_TO_FREE_VM},
-+	{"NT_STATUS_UNABLE_TO_DELETE_SECTION",
-+	 NT_STATUS_UNABLE_TO_DELETE_SECTION},
-+	{"NT_STATUS_INVALID_SYSTEM_SERVICE",
-+	 NT_STATUS_INVALID_SYSTEM_SERVICE},
-+	{"NT_STATUS_ILLEGAL_INSTRUCTION", NT_STATUS_ILLEGAL_INSTRUCTION},
-+	{"NT_STATUS_INVALID_LOCK_SEQUENCE",
-+	 NT_STATUS_INVALID_LOCK_SEQUENCE},
-+	{"NT_STATUS_INVALID_VIEW_SIZE", NT_STATUS_INVALID_VIEW_SIZE},
-+	{"NT_STATUS_INVALID_FILE_FOR_SECTION",
-+	 NT_STATUS_INVALID_FILE_FOR_SECTION},
-+	{"NT_STATUS_ALREADY_COMMITTED", NT_STATUS_ALREADY_COMMITTED},
-+	{"NT_STATUS_ACCESS_DENIED", NT_STATUS_ACCESS_DENIED},
-+	{"NT_STATUS_BUFFER_TOO_SMALL", NT_STATUS_BUFFER_TOO_SMALL},
-+	{"NT_STATUS_OBJECT_TYPE_MISMATCH", NT_STATUS_OBJECT_TYPE_MISMATCH},
-+	{"NT_STATUS_NONCONTINUABLE_EXCEPTION",
-+	 NT_STATUS_NONCONTINUABLE_EXCEPTION},
-+	{"NT_STATUS_INVALID_DISPOSITION", NT_STATUS_INVALID_DISPOSITION},
-+	{"NT_STATUS_UNWIND", NT_STATUS_UNWIND},
-+	{"NT_STATUS_BAD_STACK", NT_STATUS_BAD_STACK},
-+	{"NT_STATUS_INVALID_UNWIND_TARGET",
-+	 NT_STATUS_INVALID_UNWIND_TARGET},
-+	{"NT_STATUS_NOT_LOCKED", NT_STATUS_NOT_LOCKED},
-+	{"NT_STATUS_PARITY_ERROR", NT_STATUS_PARITY_ERROR},
-+	{"NT_STATUS_UNABLE_TO_DECOMMIT_VM",
-+	 NT_STATUS_UNABLE_TO_DECOMMIT_VM},
-+	{"NT_STATUS_NOT_COMMITTED", NT_STATUS_NOT_COMMITTED},
-+	{"NT_STATUS_INVALID_PORT_ATTRIBUTES",
-+	 NT_STATUS_INVALID_PORT_ATTRIBUTES},
-+	{"NT_STATUS_PORT_MESSAGE_TOO_LONG",
-+	 NT_STATUS_PORT_MESSAGE_TOO_LONG},
-+	{"NT_STATUS_INVALID_PARAMETER_MIX",
-+	 NT_STATUS_INVALID_PARAMETER_MIX},
-+	{"NT_STATUS_INVALID_QUOTA_LOWER", NT_STATUS_INVALID_QUOTA_LOWER},
-+	{"NT_STATUS_DISK_CORRUPT_ERROR", NT_STATUS_DISK_CORRUPT_ERROR},
-+	{"NT_STATUS_OBJECT_NAME_INVALID", NT_STATUS_OBJECT_NAME_INVALID},
-+	{"NT_STATUS_OBJECT_NAME_NOT_FOUND",
-+	 NT_STATUS_OBJECT_NAME_NOT_FOUND},
-+	{"NT_STATUS_OBJECT_NAME_COLLISION",
-+	 NT_STATUS_OBJECT_NAME_COLLISION},
-+	{"NT_STATUS_HANDLE_NOT_WAITABLE", NT_STATUS_HANDLE_NOT_WAITABLE},
-+	{"NT_STATUS_PORT_DISCONNECTED", NT_STATUS_PORT_DISCONNECTED},
-+	{"NT_STATUS_DEVICE_ALREADY_ATTACHED",
-+	 NT_STATUS_DEVICE_ALREADY_ATTACHED},
-+	{"NT_STATUS_OBJECT_PATH_INVALID", NT_STATUS_OBJECT_PATH_INVALID},
-+	{"NT_STATUS_OBJECT_PATH_NOT_FOUND",
-+	 NT_STATUS_OBJECT_PATH_NOT_FOUND},
-+	{"NT_STATUS_OBJECT_PATH_SYNTAX_BAD",
-+	 NT_STATUS_OBJECT_PATH_SYNTAX_BAD},
-+	{"NT_STATUS_DATA_OVERRUN", NT_STATUS_DATA_OVERRUN},
-+	{"NT_STATUS_DATA_LATE_ERROR", NT_STATUS_DATA_LATE_ERROR},
-+	{"NT_STATUS_DATA_ERROR", NT_STATUS_DATA_ERROR},
-+	{"NT_STATUS_CRC_ERROR", NT_STATUS_CRC_ERROR},
-+	{"NT_STATUS_SECTION_TOO_BIG", NT_STATUS_SECTION_TOO_BIG},
-+	{"NT_STATUS_PORT_CONNECTION_REFUSED",
-+	 NT_STATUS_PORT_CONNECTION_REFUSED},
-+	{"NT_STATUS_INVALID_PORT_HANDLE", NT_STATUS_INVALID_PORT_HANDLE},
-+	{"NT_STATUS_SHARING_VIOLATION", NT_STATUS_SHARING_VIOLATION},
-+	{"NT_STATUS_QUOTA_EXCEEDED", NT_STATUS_QUOTA_EXCEEDED},
-+	{"NT_STATUS_INVALID_PAGE_PROTECTION",
-+	 NT_STATUS_INVALID_PAGE_PROTECTION},
-+	{"NT_STATUS_MUTANT_NOT_OWNED", NT_STATUS_MUTANT_NOT_OWNED},
-+	{"NT_STATUS_SEMAPHORE_LIMIT_EXCEEDED",
-+	 NT_STATUS_SEMAPHORE_LIMIT_EXCEEDED},
-+	{"NT_STATUS_PORT_ALREADY_SET", NT_STATUS_PORT_ALREADY_SET},
-+	{"NT_STATUS_SECTION_NOT_IMAGE", NT_STATUS_SECTION_NOT_IMAGE},
-+	{"NT_STATUS_SUSPEND_COUNT_EXCEEDED",
-+	 NT_STATUS_SUSPEND_COUNT_EXCEEDED},
-+	{"NT_STATUS_THREAD_IS_TERMINATING",
-+	 NT_STATUS_THREAD_IS_TERMINATING},
-+	{"NT_STATUS_BAD_WORKING_SET_LIMIT",
-+	 NT_STATUS_BAD_WORKING_SET_LIMIT},
-+	{"NT_STATUS_INCOMPATIBLE_FILE_MAP",
-+	 NT_STATUS_INCOMPATIBLE_FILE_MAP},
-+	{"NT_STATUS_SECTION_PROTECTION", NT_STATUS_SECTION_PROTECTION},
-+	{"NT_STATUS_EAS_NOT_SUPPORTED", NT_STATUS_EAS_NOT_SUPPORTED},
-+	{"NT_STATUS_EA_TOO_LARGE", NT_STATUS_EA_TOO_LARGE},
-+	{"NT_STATUS_NONEXISTENT_EA_ENTRY", NT_STATUS_NONEXISTENT_EA_ENTRY},
-+	{"NT_STATUS_NO_EAS_ON_FILE", NT_STATUS_NO_EAS_ON_FILE},
-+	{"NT_STATUS_EA_CORRUPT_ERROR", NT_STATUS_EA_CORRUPT_ERROR},
-+	{"NT_STATUS_FILE_LOCK_CONFLICT", NT_STATUS_FILE_LOCK_CONFLICT},
-+	{"NT_STATUS_LOCK_NOT_GRANTED", NT_STATUS_LOCK_NOT_GRANTED},
-+	{"NT_STATUS_DELETE_PENDING", NT_STATUS_DELETE_PENDING},
-+	{"NT_STATUS_CTL_FILE_NOT_SUPPORTED",
-+	 NT_STATUS_CTL_FILE_NOT_SUPPORTED},
-+	{"NT_STATUS_UNKNOWN_REVISION", NT_STATUS_UNKNOWN_REVISION},
-+	{"NT_STATUS_REVISION_MISMATCH", NT_STATUS_REVISION_MISMATCH},
-+	{"NT_STATUS_INVALID_OWNER", NT_STATUS_INVALID_OWNER},
-+	{"NT_STATUS_INVALID_PRIMARY_GROUP",
-+	 NT_STATUS_INVALID_PRIMARY_GROUP},
-+	{"NT_STATUS_NO_IMPERSONATION_TOKEN",
-+	 NT_STATUS_NO_IMPERSONATION_TOKEN},
-+	{"NT_STATUS_CANT_DISABLE_MANDATORY",
-+	 NT_STATUS_CANT_DISABLE_MANDATORY},
-+	{"NT_STATUS_NO_LOGON_SERVERS", NT_STATUS_NO_LOGON_SERVERS},
-+	{"NT_STATUS_NO_SUCH_LOGON_SESSION",
-+	 NT_STATUS_NO_SUCH_LOGON_SESSION},
-+	{"NT_STATUS_NO_SUCH_PRIVILEGE", NT_STATUS_NO_SUCH_PRIVILEGE},
-+	{"NT_STATUS_PRIVILEGE_NOT_HELD", NT_STATUS_PRIVILEGE_NOT_HELD},
-+	{"NT_STATUS_INVALID_ACCOUNT_NAME", NT_STATUS_INVALID_ACCOUNT_NAME},
-+	{"NT_STATUS_USER_EXISTS", NT_STATUS_USER_EXISTS},
-+	{"NT_STATUS_NO_SUCH_USER", NT_STATUS_NO_SUCH_USER},
-+	{"NT_STATUS_GROUP_EXISTS", NT_STATUS_GROUP_EXISTS},
-+	{"NT_STATUS_NO_SUCH_GROUP", NT_STATUS_NO_SUCH_GROUP},
-+	{"NT_STATUS_MEMBER_IN_GROUP", NT_STATUS_MEMBER_IN_GROUP},
-+	{"NT_STATUS_MEMBER_NOT_IN_GROUP", NT_STATUS_MEMBER_NOT_IN_GROUP},
-+	{"NT_STATUS_LAST_ADMIN", NT_STATUS_LAST_ADMIN},
-+	{"NT_STATUS_WRONG_PASSWORD", NT_STATUS_WRONG_PASSWORD},
-+	{"NT_STATUS_ILL_FORMED_PASSWORD", NT_STATUS_ILL_FORMED_PASSWORD},
-+	{"NT_STATUS_PASSWORD_RESTRICTION", NT_STATUS_PASSWORD_RESTRICTION},
-+	{"NT_STATUS_LOGON_FAILURE", NT_STATUS_LOGON_FAILURE},
-+	{"NT_STATUS_ACCOUNT_RESTRICTION", NT_STATUS_ACCOUNT_RESTRICTION},
-+	{"NT_STATUS_INVALID_LOGON_HOURS", NT_STATUS_INVALID_LOGON_HOURS},
-+	{"NT_STATUS_INVALID_WORKSTATION", NT_STATUS_INVALID_WORKSTATION},
-+	{"NT_STATUS_PASSWORD_EXPIRED", NT_STATUS_PASSWORD_EXPIRED},
-+	{"NT_STATUS_ACCOUNT_DISABLED", NT_STATUS_ACCOUNT_DISABLED},
-+	{"NT_STATUS_NONE_MAPPED", NT_STATUS_NONE_MAPPED},
-+	{"NT_STATUS_TOO_MANY_LUIDS_REQUESTED",
-+	 NT_STATUS_TOO_MANY_LUIDS_REQUESTED},
-+	{"NT_STATUS_LUIDS_EXHAUSTED", NT_STATUS_LUIDS_EXHAUSTED},
-+	{"NT_STATUS_INVALID_SUB_AUTHORITY",
-+	 NT_STATUS_INVALID_SUB_AUTHORITY},
-+	{"NT_STATUS_INVALID_ACL", NT_STATUS_INVALID_ACL},
-+	{"NT_STATUS_INVALID_SID", NT_STATUS_INVALID_SID},
-+	{"NT_STATUS_INVALID_SECURITY_DESCR",
-+	 NT_STATUS_INVALID_SECURITY_DESCR},
-+	{"NT_STATUS_PROCEDURE_NOT_FOUND", NT_STATUS_PROCEDURE_NOT_FOUND},
-+	{"NT_STATUS_INVALID_IMAGE_FORMAT", NT_STATUS_INVALID_IMAGE_FORMAT},
-+	{"NT_STATUS_NO_TOKEN", NT_STATUS_NO_TOKEN},
-+	{"NT_STATUS_BAD_INHERITANCE_ACL", NT_STATUS_BAD_INHERITANCE_ACL},
-+	{"NT_STATUS_RANGE_NOT_LOCKED", NT_STATUS_RANGE_NOT_LOCKED},
-+	{"NT_STATUS_DISK_FULL", NT_STATUS_DISK_FULL},
-+	{"NT_STATUS_SERVER_DISABLED", NT_STATUS_SERVER_DISABLED},
-+	{"NT_STATUS_SERVER_NOT_DISABLED", NT_STATUS_SERVER_NOT_DISABLED},
-+	{"NT_STATUS_TOO_MANY_GUIDS_REQUESTED",
-+	 NT_STATUS_TOO_MANY_GUIDS_REQUESTED},
-+	{"NT_STATUS_GUIDS_EXHAUSTED", NT_STATUS_GUIDS_EXHAUSTED},
-+	{"NT_STATUS_INVALID_ID_AUTHORITY", NT_STATUS_INVALID_ID_AUTHORITY},
-+	{"NT_STATUS_AGENTS_EXHAUSTED", NT_STATUS_AGENTS_EXHAUSTED},
-+	{"NT_STATUS_INVALID_VOLUME_LABEL", NT_STATUS_INVALID_VOLUME_LABEL},
-+	{"NT_STATUS_SECTION_NOT_EXTENDED", NT_STATUS_SECTION_NOT_EXTENDED},
-+	{"NT_STATUS_NOT_MAPPED_DATA", NT_STATUS_NOT_MAPPED_DATA},
-+	{"NT_STATUS_RESOURCE_DATA_NOT_FOUND",
-+	 NT_STATUS_RESOURCE_DATA_NOT_FOUND},
-+	{"NT_STATUS_RESOURCE_TYPE_NOT_FOUND",
-+	 NT_STATUS_RESOURCE_TYPE_NOT_FOUND},
-+	{"NT_STATUS_RESOURCE_NAME_NOT_FOUND",
-+	 NT_STATUS_RESOURCE_NAME_NOT_FOUND},
-+	{"NT_STATUS_ARRAY_BOUNDS_EXCEEDED",
-+	 NT_STATUS_ARRAY_BOUNDS_EXCEEDED},
-+	{"NT_STATUS_FLOAT_DENORMAL_OPERAND",
-+	 NT_STATUS_FLOAT_DENORMAL_OPERAND},
-+	{"NT_STATUS_FLOAT_DIVIDE_BY_ZERO", NT_STATUS_FLOAT_DIVIDE_BY_ZERO},
-+	{"NT_STATUS_FLOAT_INEXACT_RESULT", NT_STATUS_FLOAT_INEXACT_RESULT},
-+	{"NT_STATUS_FLOAT_INVALID_OPERATION",
-+	 NT_STATUS_FLOAT_INVALID_OPERATION},
-+	{"NT_STATUS_FLOAT_OVERFLOW", NT_STATUS_FLOAT_OVERFLOW},
-+	{"NT_STATUS_FLOAT_STACK_CHECK", NT_STATUS_FLOAT_STACK_CHECK},
-+	{"NT_STATUS_FLOAT_UNDERFLOW", NT_STATUS_FLOAT_UNDERFLOW},
-+	{"NT_STATUS_INTEGER_DIVIDE_BY_ZERO",
-+	 NT_STATUS_INTEGER_DIVIDE_BY_ZERO},
-+	{"NT_STATUS_INTEGER_OVERFLOW", NT_STATUS_INTEGER_OVERFLOW},
-+	{"NT_STATUS_PRIVILEGED_INSTRUCTION",
-+	 NT_STATUS_PRIVILEGED_INSTRUCTION},
-+	{"NT_STATUS_TOO_MANY_PAGING_FILES",
-+	 NT_STATUS_TOO_MANY_PAGING_FILES},
-+	{"NT_STATUS_FILE_INVALID", NT_STATUS_FILE_INVALID},
-+	{"NT_STATUS_ALLOTTED_SPACE_EXCEEDED",
-+	 NT_STATUS_ALLOTTED_SPACE_EXCEEDED},
-+	{"NT_STATUS_INSUFFICIENT_RESOURCES",
-+	 NT_STATUS_INSUFFICIENT_RESOURCES},
-+	{"NT_STATUS_DFS_EXIT_PATH_FOUND", NT_STATUS_DFS_EXIT_PATH_FOUND},
-+	{"NT_STATUS_DEVICE_DATA_ERROR", NT_STATUS_DEVICE_DATA_ERROR},
-+	{"NT_STATUS_DEVICE_NOT_CONNECTED", NT_STATUS_DEVICE_NOT_CONNECTED},
-+	{"NT_STATUS_DEVICE_POWER_FAILURE", NT_STATUS_DEVICE_POWER_FAILURE},
-+	{"NT_STATUS_FREE_VM_NOT_AT_BASE", NT_STATUS_FREE_VM_NOT_AT_BASE},
-+	{"NT_STATUS_MEMORY_NOT_ALLOCATED", NT_STATUS_MEMORY_NOT_ALLOCATED},
-+	{"NT_STATUS_WORKING_SET_QUOTA", NT_STATUS_WORKING_SET_QUOTA},
-+	{"NT_STATUS_MEDIA_WRITE_PROTECTED",
-+	 NT_STATUS_MEDIA_WRITE_PROTECTED},
-+	{"NT_STATUS_DEVICE_NOT_READY", NT_STATUS_DEVICE_NOT_READY},
-+	{"NT_STATUS_INVALID_GROUP_ATTRIBUTES",
-+	 NT_STATUS_INVALID_GROUP_ATTRIBUTES},
-+	{"NT_STATUS_BAD_IMPERSONATION_LEVEL",
-+	 NT_STATUS_BAD_IMPERSONATION_LEVEL},
-+	{"NT_STATUS_CANT_OPEN_ANONYMOUS", NT_STATUS_CANT_OPEN_ANONYMOUS},
-+	{"NT_STATUS_BAD_VALIDATION_CLASS", NT_STATUS_BAD_VALIDATION_CLASS},
-+	{"NT_STATUS_BAD_TOKEN_TYPE", NT_STATUS_BAD_TOKEN_TYPE},
-+	{"NT_STATUS_BAD_MASTER_BOOT_RECORD",
-+	 NT_STATUS_BAD_MASTER_BOOT_RECORD},
-+	{"NT_STATUS_INSTRUCTION_MISALIGNMENT",
-+	 NT_STATUS_INSTRUCTION_MISALIGNMENT},
-+	{"NT_STATUS_INSTANCE_NOT_AVAILABLE",
-+	 NT_STATUS_INSTANCE_NOT_AVAILABLE},
-+	{"NT_STATUS_PIPE_NOT_AVAILABLE", NT_STATUS_PIPE_NOT_AVAILABLE},
-+	{"NT_STATUS_INVALID_PIPE_STATE", NT_STATUS_INVALID_PIPE_STATE},
-+	{"NT_STATUS_PIPE_BUSY", NT_STATUS_PIPE_BUSY},
-+	{"NT_STATUS_ILLEGAL_FUNCTION", NT_STATUS_ILLEGAL_FUNCTION},
-+	{"NT_STATUS_PIPE_DISCONNECTED", NT_STATUS_PIPE_DISCONNECTED},
-+	{"NT_STATUS_PIPE_CLOSING", NT_STATUS_PIPE_CLOSING},
-+	{"NT_STATUS_PIPE_CONNECTED", NT_STATUS_PIPE_CONNECTED},
-+	{"NT_STATUS_PIPE_LISTENING", NT_STATUS_PIPE_LISTENING},
-+	{"NT_STATUS_INVALID_READ_MODE", NT_STATUS_INVALID_READ_MODE},
-+	{"NT_STATUS_IO_TIMEOUT", NT_STATUS_IO_TIMEOUT},
-+	{"NT_STATUS_FILE_FORCED_CLOSED", NT_STATUS_FILE_FORCED_CLOSED},
-+	{"NT_STATUS_PROFILING_NOT_STARTED",
-+	 NT_STATUS_PROFILING_NOT_STARTED},
-+	{"NT_STATUS_PROFILING_NOT_STOPPED",
-+	 NT_STATUS_PROFILING_NOT_STOPPED},
-+	{"NT_STATUS_COULD_NOT_INTERPRET", NT_STATUS_COULD_NOT_INTERPRET},
-+	{"NT_STATUS_FILE_IS_A_DIRECTORY", NT_STATUS_FILE_IS_A_DIRECTORY},
-+	{"NT_STATUS_NOT_SUPPORTED", NT_STATUS_NOT_SUPPORTED},
-+	{"NT_STATUS_REMOTE_NOT_LISTENING", NT_STATUS_REMOTE_NOT_LISTENING},
-+	{"NT_STATUS_DUPLICATE_NAME", NT_STATUS_DUPLICATE_NAME},
-+	{"NT_STATUS_BAD_NETWORK_PATH", NT_STATUS_BAD_NETWORK_PATH},
-+	{"NT_STATUS_NETWORK_BUSY", NT_STATUS_NETWORK_BUSY},
-+	{"NT_STATUS_DEVICE_DOES_NOT_EXIST",
-+	 NT_STATUS_DEVICE_DOES_NOT_EXIST},
-+	{"NT_STATUS_TOO_MANY_COMMANDS", NT_STATUS_TOO_MANY_COMMANDS},
-+	{"NT_STATUS_ADAPTER_HARDWARE_ERROR",
-+	 NT_STATUS_ADAPTER_HARDWARE_ERROR},
-+	{"NT_STATUS_INVALID_NETWORK_RESPONSE",
-+	 NT_STATUS_INVALID_NETWORK_RESPONSE},
-+	{"NT_STATUS_UNEXPECTED_NETWORK_ERROR",
-+	 NT_STATUS_UNEXPECTED_NETWORK_ERROR},
-+	{"NT_STATUS_BAD_REMOTE_ADAPTER", NT_STATUS_BAD_REMOTE_ADAPTER},
-+	{"NT_STATUS_PRINT_QUEUE_FULL", NT_STATUS_PRINT_QUEUE_FULL},
-+	{"NT_STATUS_NO_SPOOL_SPACE", NT_STATUS_NO_SPOOL_SPACE},
-+	{"NT_STATUS_PRINT_CANCELLED", NT_STATUS_PRINT_CANCELLED},
-+	{"NT_STATUS_NETWORK_NAME_DELETED", NT_STATUS_NETWORK_NAME_DELETED},
-+	{"NT_STATUS_NETWORK_ACCESS_DENIED",
-+	 NT_STATUS_NETWORK_ACCESS_DENIED},
-+	{"NT_STATUS_BAD_DEVICE_TYPE", NT_STATUS_BAD_DEVICE_TYPE},
-+	{"NT_STATUS_BAD_NETWORK_NAME", NT_STATUS_BAD_NETWORK_NAME},
-+	{"NT_STATUS_TOO_MANY_NAMES", NT_STATUS_TOO_MANY_NAMES},
-+	{"NT_STATUS_TOO_MANY_SESSIONS", NT_STATUS_TOO_MANY_SESSIONS},
-+	{"NT_STATUS_SHARING_PAUSED", NT_STATUS_SHARING_PAUSED},
-+	{"NT_STATUS_REQUEST_NOT_ACCEPTED", NT_STATUS_REQUEST_NOT_ACCEPTED},
-+	{"NT_STATUS_REDIRECTOR_PAUSED", NT_STATUS_REDIRECTOR_PAUSED},
-+	{"NT_STATUS_NET_WRITE_FAULT", NT_STATUS_NET_WRITE_FAULT},
-+	{"NT_STATUS_PROFILING_AT_LIMIT", NT_STATUS_PROFILING_AT_LIMIT},
-+	{"NT_STATUS_NOT_SAME_DEVICE", NT_STATUS_NOT_SAME_DEVICE},
-+	{"NT_STATUS_FILE_RENAMED", NT_STATUS_FILE_RENAMED},
-+	{"NT_STATUS_VIRTUAL_CIRCUIT_CLOSED",
-+	 NT_STATUS_VIRTUAL_CIRCUIT_CLOSED},
-+	{"NT_STATUS_NO_SECURITY_ON_OBJECT",
-+	 NT_STATUS_NO_SECURITY_ON_OBJECT},
-+	{"NT_STATUS_CANT_WAIT", NT_STATUS_CANT_WAIT},
-+	{"NT_STATUS_PIPE_EMPTY", NT_STATUS_PIPE_EMPTY},
-+	{"NT_STATUS_CANT_ACCESS_DOMAIN_INFO",
-+	 NT_STATUS_CANT_ACCESS_DOMAIN_INFO},
-+	{"NT_STATUS_CANT_TERMINATE_SELF", NT_STATUS_CANT_TERMINATE_SELF},
-+	{"NT_STATUS_INVALID_SERVER_STATE", NT_STATUS_INVALID_SERVER_STATE},
-+	{"NT_STATUS_INVALID_DOMAIN_STATE", NT_STATUS_INVALID_DOMAIN_STATE},
-+	{"NT_STATUS_INVALID_DOMAIN_ROLE", NT_STATUS_INVALID_DOMAIN_ROLE},
-+	{"NT_STATUS_NO_SUCH_DOMAIN", NT_STATUS_NO_SUCH_DOMAIN},
-+	{"NT_STATUS_DOMAIN_EXISTS", NT_STATUS_DOMAIN_EXISTS},
-+	{"NT_STATUS_DOMAIN_LIMIT_EXCEEDED",
-+	 NT_STATUS_DOMAIN_LIMIT_EXCEEDED},
-+	{"NT_STATUS_OPLOCK_NOT_GRANTED", NT_STATUS_OPLOCK_NOT_GRANTED},
-+	{"NT_STATUS_INVALID_OPLOCK_PROTOCOL",
-+	 NT_STATUS_INVALID_OPLOCK_PROTOCOL},
-+	{"NT_STATUS_INTERNAL_DB_CORRUPTION",
-+	 NT_STATUS_INTERNAL_DB_CORRUPTION},
-+	{"NT_STATUS_INTERNAL_ERROR", NT_STATUS_INTERNAL_ERROR},
-+	{"NT_STATUS_GENERIC_NOT_MAPPED", NT_STATUS_GENERIC_NOT_MAPPED},
-+	{"NT_STATUS_BAD_DESCRIPTOR_FORMAT",
-+	 NT_STATUS_BAD_DESCRIPTOR_FORMAT},
-+	{"NT_STATUS_INVALID_USER_BUFFER", NT_STATUS_INVALID_USER_BUFFER},
-+	{"NT_STATUS_UNEXPECTED_IO_ERROR", NT_STATUS_UNEXPECTED_IO_ERROR},
-+	{"NT_STATUS_UNEXPECTED_MM_CREATE_ERR",
-+	 NT_STATUS_UNEXPECTED_MM_CREATE_ERR},
-+	{"NT_STATUS_UNEXPECTED_MM_MAP_ERROR",
-+	 NT_STATUS_UNEXPECTED_MM_MAP_ERROR},
-+	{"NT_STATUS_UNEXPECTED_MM_EXTEND_ERR",
-+	 NT_STATUS_UNEXPECTED_MM_EXTEND_ERR},
-+	{"NT_STATUS_NOT_LOGON_PROCESS", NT_STATUS_NOT_LOGON_PROCESS},
-+	{"NT_STATUS_LOGON_SESSION_EXISTS", NT_STATUS_LOGON_SESSION_EXISTS},
-+	{"NT_STATUS_INVALID_PARAMETER_1", NT_STATUS_INVALID_PARAMETER_1},
-+	{"NT_STATUS_INVALID_PARAMETER_2", NT_STATUS_INVALID_PARAMETER_2},
-+	{"NT_STATUS_INVALID_PARAMETER_3", NT_STATUS_INVALID_PARAMETER_3},
-+	{"NT_STATUS_INVALID_PARAMETER_4", NT_STATUS_INVALID_PARAMETER_4},
-+	{"NT_STATUS_INVALID_PARAMETER_5", NT_STATUS_INVALID_PARAMETER_5},
-+	{"NT_STATUS_INVALID_PARAMETER_6", NT_STATUS_INVALID_PARAMETER_6},
-+	{"NT_STATUS_INVALID_PARAMETER_7", NT_STATUS_INVALID_PARAMETER_7},
-+	{"NT_STATUS_INVALID_PARAMETER_8", NT_STATUS_INVALID_PARAMETER_8},
-+	{"NT_STATUS_INVALID_PARAMETER_9", NT_STATUS_INVALID_PARAMETER_9},
-+	{"NT_STATUS_INVALID_PARAMETER_10", NT_STATUS_INVALID_PARAMETER_10},
-+	{"NT_STATUS_INVALID_PARAMETER_11", NT_STATUS_INVALID_PARAMETER_11},
-+	{"NT_STATUS_INVALID_PARAMETER_12", NT_STATUS_INVALID_PARAMETER_12},
-+	{"NT_STATUS_REDIRECTOR_NOT_STARTED",
-+	 NT_STATUS_REDIRECTOR_NOT_STARTED},
-+	{"NT_STATUS_REDIRECTOR_STARTED", NT_STATUS_REDIRECTOR_STARTED},
-+	{"NT_STATUS_STACK_OVERFLOW", NT_STATUS_STACK_OVERFLOW},
-+	{"NT_STATUS_NO_SUCH_PACKAGE", NT_STATUS_NO_SUCH_PACKAGE},
-+	{"NT_STATUS_BAD_FUNCTION_TABLE", NT_STATUS_BAD_FUNCTION_TABLE},
-+	{"NT_STATUS_DIRECTORY_NOT_EMPTY", NT_STATUS_DIRECTORY_NOT_EMPTY},
-+	{"NT_STATUS_FILE_CORRUPT_ERROR", NT_STATUS_FILE_CORRUPT_ERROR},
-+	{"NT_STATUS_NOT_A_DIRECTORY", NT_STATUS_NOT_A_DIRECTORY},
-+	{"NT_STATUS_BAD_LOGON_SESSION_STATE",
-+	 NT_STATUS_BAD_LOGON_SESSION_STATE},
-+	{"NT_STATUS_LOGON_SESSION_COLLISION",
-+	 NT_STATUS_LOGON_SESSION_COLLISION},
-+	{"NT_STATUS_NAME_TOO_LONG", NT_STATUS_NAME_TOO_LONG},
-+	{"NT_STATUS_FILES_OPEN", NT_STATUS_FILES_OPEN},
-+	{"NT_STATUS_CONNECTION_IN_USE", NT_STATUS_CONNECTION_IN_USE},
-+	{"NT_STATUS_MESSAGE_NOT_FOUND", NT_STATUS_MESSAGE_NOT_FOUND},
-+	{"NT_STATUS_PROCESS_IS_TERMINATING",
-+	 NT_STATUS_PROCESS_IS_TERMINATING},
-+	{"NT_STATUS_INVALID_LOGON_TYPE", NT_STATUS_INVALID_LOGON_TYPE},
-+	{"NT_STATUS_NO_GUID_TRANSLATION", NT_STATUS_NO_GUID_TRANSLATION},
-+	{"NT_STATUS_CANNOT_IMPERSONATE", NT_STATUS_CANNOT_IMPERSONATE},
-+	{"NT_STATUS_IMAGE_ALREADY_LOADED", NT_STATUS_IMAGE_ALREADY_LOADED},
-+	{"NT_STATUS_ABIOS_NOT_PRESENT", NT_STATUS_ABIOS_NOT_PRESENT},
-+	{"NT_STATUS_ABIOS_LID_NOT_EXIST", NT_STATUS_ABIOS_LID_NOT_EXIST},
-+	{"NT_STATUS_ABIOS_LID_ALREADY_OWNED",
-+	 NT_STATUS_ABIOS_LID_ALREADY_OWNED},
-+	{"NT_STATUS_ABIOS_NOT_LID_OWNER", NT_STATUS_ABIOS_NOT_LID_OWNER},
-+	{"NT_STATUS_ABIOS_INVALID_COMMAND",
-+	 NT_STATUS_ABIOS_INVALID_COMMAND},
-+	{"NT_STATUS_ABIOS_INVALID_LID", NT_STATUS_ABIOS_INVALID_LID},
-+	{"NT_STATUS_ABIOS_SELECTOR_NOT_AVAILABLE",
-+	 NT_STATUS_ABIOS_SELECTOR_NOT_AVAILABLE},
-+	{"NT_STATUS_ABIOS_INVALID_SELECTOR",
-+	 NT_STATUS_ABIOS_INVALID_SELECTOR},
-+	{"NT_STATUS_NO_LDT", NT_STATUS_NO_LDT},
-+	{"NT_STATUS_INVALID_LDT_SIZE", NT_STATUS_INVALID_LDT_SIZE},
-+	{"NT_STATUS_INVALID_LDT_OFFSET", NT_STATUS_INVALID_LDT_OFFSET},
-+	{"NT_STATUS_INVALID_LDT_DESCRIPTOR",
-+	 NT_STATUS_INVALID_LDT_DESCRIPTOR},
-+	{"NT_STATUS_INVALID_IMAGE_NE_FORMAT",
-+	 NT_STATUS_INVALID_IMAGE_NE_FORMAT},
-+	{"NT_STATUS_RXACT_INVALID_STATE", NT_STATUS_RXACT_INVALID_STATE},
-+	{"NT_STATUS_RXACT_COMMIT_FAILURE", NT_STATUS_RXACT_COMMIT_FAILURE},
-+	{"NT_STATUS_MAPPED_FILE_SIZE_ZERO",
-+	 NT_STATUS_MAPPED_FILE_SIZE_ZERO},
-+	{"NT_STATUS_TOO_MANY_OPENED_FILES",
-+	 NT_STATUS_TOO_MANY_OPENED_FILES},
-+	{"NT_STATUS_CANCELLED", NT_STATUS_CANCELLED},
-+	{"NT_STATUS_CANNOT_DELETE", NT_STATUS_CANNOT_DELETE},
-+	{"NT_STATUS_INVALID_COMPUTER_NAME",
-+	 NT_STATUS_INVALID_COMPUTER_NAME},
-+	{"NT_STATUS_FILE_DELETED", NT_STATUS_FILE_DELETED},
-+	{"NT_STATUS_SPECIAL_ACCOUNT", NT_STATUS_SPECIAL_ACCOUNT},
-+	{"NT_STATUS_SPECIAL_GROUP", NT_STATUS_SPECIAL_GROUP},
-+	{"NT_STATUS_SPECIAL_USER", NT_STATUS_SPECIAL_USER},
-+	{"NT_STATUS_MEMBERS_PRIMARY_GROUP",
-+	 NT_STATUS_MEMBERS_PRIMARY_GROUP},
-+	{"NT_STATUS_FILE_CLOSED", NT_STATUS_FILE_CLOSED},
-+	{"NT_STATUS_TOO_MANY_THREADS", NT_STATUS_TOO_MANY_THREADS},
-+	{"NT_STATUS_THREAD_NOT_IN_PROCESS",
-+	 NT_STATUS_THREAD_NOT_IN_PROCESS},
-+	{"NT_STATUS_TOKEN_ALREADY_IN_USE", NT_STATUS_TOKEN_ALREADY_IN_USE},
-+	{"NT_STATUS_PAGEFILE_QUOTA_EXCEEDED",
-+	 NT_STATUS_PAGEFILE_QUOTA_EXCEEDED},
-+	{"NT_STATUS_COMMITMENT_LIMIT", NT_STATUS_COMMITMENT_LIMIT},
-+	{"NT_STATUS_INVALID_IMAGE_LE_FORMAT",
-+	 NT_STATUS_INVALID_IMAGE_LE_FORMAT},
-+	{"NT_STATUS_INVALID_IMAGE_NOT_MZ", NT_STATUS_INVALID_IMAGE_NOT_MZ},
-+	{"NT_STATUS_INVALID_IMAGE_PROTECT",
-+	 NT_STATUS_INVALID_IMAGE_PROTECT},
-+	{"NT_STATUS_INVALID_IMAGE_WIN_16", NT_STATUS_INVALID_IMAGE_WIN_16},
-+	{"NT_STATUS_LOGON_SERVER_CONFLICT",
-+	 NT_STATUS_LOGON_SERVER_CONFLICT},
-+	{"NT_STATUS_TIME_DIFFERENCE_AT_DC",
-+	 NT_STATUS_TIME_DIFFERENCE_AT_DC},
-+	{"NT_STATUS_SYNCHRONIZATION_REQUIRED",
-+	 NT_STATUS_SYNCHRONIZATION_REQUIRED},
-+	{"NT_STATUS_DLL_NOT_FOUND", NT_STATUS_DLL_NOT_FOUND},
-+	{"NT_STATUS_OPEN_FAILED", NT_STATUS_OPEN_FAILED},
-+	{"NT_STATUS_IO_PRIVILEGE_FAILED", NT_STATUS_IO_PRIVILEGE_FAILED},
-+	{"NT_STATUS_ORDINAL_NOT_FOUND", NT_STATUS_ORDINAL_NOT_FOUND},
-+	{"NT_STATUS_ENTRYPOINT_NOT_FOUND", NT_STATUS_ENTRYPOINT_NOT_FOUND},
-+	{"NT_STATUS_CONTROL_C_EXIT", NT_STATUS_CONTROL_C_EXIT},
-+	{"NT_STATUS_LOCAL_DISCONNECT", NT_STATUS_LOCAL_DISCONNECT},
-+	{"NT_STATUS_REMOTE_DISCONNECT", NT_STATUS_REMOTE_DISCONNECT},
-+	{"NT_STATUS_REMOTE_RESOURCES", NT_STATUS_REMOTE_RESOURCES},
-+	{"NT_STATUS_LINK_FAILED", NT_STATUS_LINK_FAILED},
-+	{"NT_STATUS_LINK_TIMEOUT", NT_STATUS_LINK_TIMEOUT},
-+	{"NT_STATUS_INVALID_CONNECTION", NT_STATUS_INVALID_CONNECTION},
-+	{"NT_STATUS_INVALID_ADDRESS", NT_STATUS_INVALID_ADDRESS},
-+	{"NT_STATUS_DLL_INIT_FAILED", NT_STATUS_DLL_INIT_FAILED},
-+	{"NT_STATUS_MISSING_SYSTEMFILE", NT_STATUS_MISSING_SYSTEMFILE},
-+	{"NT_STATUS_UNHANDLED_EXCEPTION", NT_STATUS_UNHANDLED_EXCEPTION},
-+	{"NT_STATUS_APP_INIT_FAILURE", NT_STATUS_APP_INIT_FAILURE},
-+	{"NT_STATUS_PAGEFILE_CREATE_FAILED",
-+	 NT_STATUS_PAGEFILE_CREATE_FAILED},
-+	{"NT_STATUS_NO_PAGEFILE", NT_STATUS_NO_PAGEFILE},
-+	{"NT_STATUS_INVALID_LEVEL", NT_STATUS_INVALID_LEVEL},
-+	{"NT_STATUS_WRONG_PASSWORD_CORE", NT_STATUS_WRONG_PASSWORD_CORE},
-+	{"NT_STATUS_ILLEGAL_FLOAT_CONTEXT",
-+	 NT_STATUS_ILLEGAL_FLOAT_CONTEXT},
-+	{"NT_STATUS_PIPE_BROKEN", NT_STATUS_PIPE_BROKEN},
-+	{"NT_STATUS_REGISTRY_CORRUPT", NT_STATUS_REGISTRY_CORRUPT},
-+	{"NT_STATUS_REGISTRY_IO_FAILED", NT_STATUS_REGISTRY_IO_FAILED},
-+	{"NT_STATUS_NO_EVENT_PAIR", NT_STATUS_NO_EVENT_PAIR},
-+	{"NT_STATUS_UNRECOGNIZED_VOLUME", NT_STATUS_UNRECOGNIZED_VOLUME},
-+	{"NT_STATUS_SERIAL_NO_DEVICE_INITED",
-+	 NT_STATUS_SERIAL_NO_DEVICE_INITED},
-+	{"NT_STATUS_NO_SUCH_ALIAS", NT_STATUS_NO_SUCH_ALIAS},
-+	{"NT_STATUS_MEMBER_NOT_IN_ALIAS", NT_STATUS_MEMBER_NOT_IN_ALIAS},
-+	{"NT_STATUS_MEMBER_IN_ALIAS", NT_STATUS_MEMBER_IN_ALIAS},
-+	{"NT_STATUS_ALIAS_EXISTS", NT_STATUS_ALIAS_EXISTS},
-+	{"NT_STATUS_LOGON_NOT_GRANTED", NT_STATUS_LOGON_NOT_GRANTED},
-+	{"NT_STATUS_TOO_MANY_SECRETS", NT_STATUS_TOO_MANY_SECRETS},
-+	{"NT_STATUS_SECRET_TOO_LONG", NT_STATUS_SECRET_TOO_LONG},
-+	{"NT_STATUS_INTERNAL_DB_ERROR", NT_STATUS_INTERNAL_DB_ERROR},
-+	{"NT_STATUS_FULLSCREEN_MODE", NT_STATUS_FULLSCREEN_MODE},
-+	{"NT_STATUS_TOO_MANY_CONTEXT_IDS", NT_STATUS_TOO_MANY_CONTEXT_IDS},
-+	{"NT_STATUS_LOGON_TYPE_NOT_GRANTED",
-+	 NT_STATUS_LOGON_TYPE_NOT_GRANTED},
-+	{"NT_STATUS_NOT_REGISTRY_FILE", NT_STATUS_NOT_REGISTRY_FILE},
-+	{"NT_STATUS_NT_CROSS_ENCRYPTION_REQUIRED",
-+	 NT_STATUS_NT_CROSS_ENCRYPTION_REQUIRED},
-+	{"NT_STATUS_DOMAIN_CTRLR_CONFIG_ERROR",
-+	 NT_STATUS_DOMAIN_CTRLR_CONFIG_ERROR},
-+	{"NT_STATUS_FT_MISSING_MEMBER", NT_STATUS_FT_MISSING_MEMBER},
-+	{"NT_STATUS_ILL_FORMED_SERVICE_ENTRY",
-+	 NT_STATUS_ILL_FORMED_SERVICE_ENTRY},
-+	{"NT_STATUS_ILLEGAL_CHARACTER", NT_STATUS_ILLEGAL_CHARACTER},
-+	{"NT_STATUS_UNMAPPABLE_CHARACTER", NT_STATUS_UNMAPPABLE_CHARACTER},
-+	{"NT_STATUS_UNDEFINED_CHARACTER", NT_STATUS_UNDEFINED_CHARACTER},
-+	{"NT_STATUS_FLOPPY_VOLUME", NT_STATUS_FLOPPY_VOLUME},
-+	{"NT_STATUS_FLOPPY_ID_MARK_NOT_FOUND",
-+	 NT_STATUS_FLOPPY_ID_MARK_NOT_FOUND},
-+	{"NT_STATUS_FLOPPY_WRONG_CYLINDER",
-+	 NT_STATUS_FLOPPY_WRONG_CYLINDER},
-+	{"NT_STATUS_FLOPPY_UNKNOWN_ERROR", NT_STATUS_FLOPPY_UNKNOWN_ERROR},
-+	{"NT_STATUS_FLOPPY_BAD_REGISTERS", NT_STATUS_FLOPPY_BAD_REGISTERS},
-+	{"NT_STATUS_DISK_RECALIBRATE_FAILED",
-+	 NT_STATUS_DISK_RECALIBRATE_FAILED},
-+	{"NT_STATUS_DISK_OPERATION_FAILED",
-+	 NT_STATUS_DISK_OPERATION_FAILED},
-+	{"NT_STATUS_DISK_RESET_FAILED", NT_STATUS_DISK_RESET_FAILED},
-+	{"NT_STATUS_SHARED_IRQ_BUSY", NT_STATUS_SHARED_IRQ_BUSY},
-+	{"NT_STATUS_FT_ORPHANING", NT_STATUS_FT_ORPHANING},
-+	{"NT_STATUS_PARTITION_FAILURE", NT_STATUS_PARTITION_FAILURE},
-+	{"NT_STATUS_INVALID_BLOCK_LENGTH", NT_STATUS_INVALID_BLOCK_LENGTH},
-+	{"NT_STATUS_DEVICE_NOT_PARTITIONED",
-+	 NT_STATUS_DEVICE_NOT_PARTITIONED},
-+	{"NT_STATUS_UNABLE_TO_LOCK_MEDIA", NT_STATUS_UNABLE_TO_LOCK_MEDIA},
-+	{"NT_STATUS_UNABLE_TO_UNLOAD_MEDIA",
-+	 NT_STATUS_UNABLE_TO_UNLOAD_MEDIA},
-+	{"NT_STATUS_EOM_OVERFLOW", NT_STATUS_EOM_OVERFLOW},
-+	{"NT_STATUS_NO_MEDIA", NT_STATUS_NO_MEDIA},
-+	{"NT_STATUS_NO_SUCH_MEMBER", NT_STATUS_NO_SUCH_MEMBER},
-+	{"NT_STATUS_INVALID_MEMBER", NT_STATUS_INVALID_MEMBER},
-+	{"NT_STATUS_KEY_DELETED", NT_STATUS_KEY_DELETED},
-+	{"NT_STATUS_NO_LOG_SPACE", NT_STATUS_NO_LOG_SPACE},
-+	{"NT_STATUS_TOO_MANY_SIDS", NT_STATUS_TOO_MANY_SIDS},
-+	{"NT_STATUS_LM_CROSS_ENCRYPTION_REQUIRED",
-+	 NT_STATUS_LM_CROSS_ENCRYPTION_REQUIRED},
-+	{"NT_STATUS_KEY_HAS_CHILDREN", NT_STATUS_KEY_HAS_CHILDREN},
-+	{"NT_STATUS_CHILD_MUST_BE_VOLATILE",
-+	 NT_STATUS_CHILD_MUST_BE_VOLATILE},
-+	{"NT_STATUS_DEVICE_CONFIGURATION_ERROR",
-+	 NT_STATUS_DEVICE_CONFIGURATION_ERROR},
-+	{"NT_STATUS_DRIVER_INTERNAL_ERROR",
-+	 NT_STATUS_DRIVER_INTERNAL_ERROR},
-+	{"NT_STATUS_INVALID_DEVICE_STATE", NT_STATUS_INVALID_DEVICE_STATE},
-+	{"NT_STATUS_IO_DEVICE_ERROR", NT_STATUS_IO_DEVICE_ERROR},
-+	{"NT_STATUS_DEVICE_PROTOCOL_ERROR",
-+	 NT_STATUS_DEVICE_PROTOCOL_ERROR},
-+	{"NT_STATUS_BACKUP_CONTROLLER", NT_STATUS_BACKUP_CONTROLLER},
-+	{"NT_STATUS_LOG_FILE_FULL", NT_STATUS_LOG_FILE_FULL},
-+	{"NT_STATUS_TOO_LATE", NT_STATUS_TOO_LATE},
-+	{"NT_STATUS_NO_TRUST_LSA_SECRET", NT_STATUS_NO_TRUST_LSA_SECRET},
-+	{"NT_STATUS_NO_TRUST_SAM_ACCOUNT", NT_STATUS_NO_TRUST_SAM_ACCOUNT},
-+	{"NT_STATUS_TRUSTED_DOMAIN_FAILURE",
-+	 NT_STATUS_TRUSTED_DOMAIN_FAILURE},
-+	{"NT_STATUS_TRUSTED_RELATIONSHIP_FAILURE",
-+	 NT_STATUS_TRUSTED_RELATIONSHIP_FAILURE},
-+	{"NT_STATUS_EVENTLOG_FILE_CORRUPT",
-+	 NT_STATUS_EVENTLOG_FILE_CORRUPT},
-+	{"NT_STATUS_EVENTLOG_CANT_START", NT_STATUS_EVENTLOG_CANT_START},
-+	{"NT_STATUS_TRUST_FAILURE", NT_STATUS_TRUST_FAILURE},
-+	{"NT_STATUS_MUTANT_LIMIT_EXCEEDED",
-+	 NT_STATUS_MUTANT_LIMIT_EXCEEDED},
-+	{"NT_STATUS_NETLOGON_NOT_STARTED", NT_STATUS_NETLOGON_NOT_STARTED},
-+	{"NT_STATUS_ACCOUNT_EXPIRED", NT_STATUS_ACCOUNT_EXPIRED},
-+	{"NT_STATUS_POSSIBLE_DEADLOCK", NT_STATUS_POSSIBLE_DEADLOCK},
-+	{"NT_STATUS_NETWORK_CREDENTIAL_CONFLICT",
-+	 NT_STATUS_NETWORK_CREDENTIAL_CONFLICT},
-+	{"NT_STATUS_REMOTE_SESSION_LIMIT", NT_STATUS_REMOTE_SESSION_LIMIT},
-+	{"NT_STATUS_EVENTLOG_FILE_CHANGED",
-+	 NT_STATUS_EVENTLOG_FILE_CHANGED},
-+	{"NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT",
-+	 NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT},
-+	{"NT_STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT",
-+	 NT_STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT},
-+	{"NT_STATUS_NOLOGON_SERVER_TRUST_ACCOUNT",
-+	 NT_STATUS_NOLOGON_SERVER_TRUST_ACCOUNT},
-+	{"NT_STATUS_DOMAIN_TRUST_INCONSISTENT",
-+	 NT_STATUS_DOMAIN_TRUST_INCONSISTENT},
-+	{"NT_STATUS_FS_DRIVER_REQUIRED", NT_STATUS_FS_DRIVER_REQUIRED},
-+	{"NT_STATUS_NO_USER_SESSION_KEY", NT_STATUS_NO_USER_SESSION_KEY},
-+	{"NT_STATUS_USER_SESSION_DELETED", NT_STATUS_USER_SESSION_DELETED},
-+	{"NT_STATUS_RESOURCE_LANG_NOT_FOUND",
-+	 NT_STATUS_RESOURCE_LANG_NOT_FOUND},
-+	{"NT_STATUS_INSUFF_SERVER_RESOURCES",
-+	 NT_STATUS_INSUFF_SERVER_RESOURCES},
-+	{"NT_STATUS_INVALID_BUFFER_SIZE", NT_STATUS_INVALID_BUFFER_SIZE},
-+	{"NT_STATUS_INVALID_ADDRESS_COMPONENT",
-+	 NT_STATUS_INVALID_ADDRESS_COMPONENT},
-+	{"NT_STATUS_INVALID_ADDRESS_WILDCARD",
-+	 NT_STATUS_INVALID_ADDRESS_WILDCARD},
-+	{"NT_STATUS_TOO_MANY_ADDRESSES", NT_STATUS_TOO_MANY_ADDRESSES},
-+	{"NT_STATUS_ADDRESS_ALREADY_EXISTS",
-+	 NT_STATUS_ADDRESS_ALREADY_EXISTS},
-+	{"NT_STATUS_ADDRESS_CLOSED", NT_STATUS_ADDRESS_CLOSED},
-+	{"NT_STATUS_CONNECTION_DISCONNECTED",
-+	 NT_STATUS_CONNECTION_DISCONNECTED},
-+	{"NT_STATUS_CONNECTION_RESET", NT_STATUS_CONNECTION_RESET},
-+	{"NT_STATUS_TOO_MANY_NODES", NT_STATUS_TOO_MANY_NODES},
-+	{"NT_STATUS_TRANSACTION_ABORTED", NT_STATUS_TRANSACTION_ABORTED},
-+	{"NT_STATUS_TRANSACTION_TIMED_OUT",
-+	 NT_STATUS_TRANSACTION_TIMED_OUT},
-+	{"NT_STATUS_TRANSACTION_NO_RELEASE",
-+	 NT_STATUS_TRANSACTION_NO_RELEASE},
-+	{"NT_STATUS_TRANSACTION_NO_MATCH", NT_STATUS_TRANSACTION_NO_MATCH},
-+	{"NT_STATUS_TRANSACTION_RESPONDED",
-+	 NT_STATUS_TRANSACTION_RESPONDED},
-+	{"NT_STATUS_TRANSACTION_INVALID_ID",
-+	 NT_STATUS_TRANSACTION_INVALID_ID},
-+	{"NT_STATUS_TRANSACTION_INVALID_TYPE",
-+	 NT_STATUS_TRANSACTION_INVALID_TYPE},
-+	{"NT_STATUS_NOT_SERVER_SESSION", NT_STATUS_NOT_SERVER_SESSION},
-+	{"NT_STATUS_NOT_CLIENT_SESSION", NT_STATUS_NOT_CLIENT_SESSION},
-+	{"NT_STATUS_CANNOT_LOAD_REGISTRY_FILE",
-+	 NT_STATUS_CANNOT_LOAD_REGISTRY_FILE},
-+	{"NT_STATUS_DEBUG_ATTACH_FAILED", NT_STATUS_DEBUG_ATTACH_FAILED},
-+	{"NT_STATUS_SYSTEM_PROCESS_TERMINATED",
-+	 NT_STATUS_SYSTEM_PROCESS_TERMINATED},
-+	{"NT_STATUS_DATA_NOT_ACCEPTED", NT_STATUS_DATA_NOT_ACCEPTED},
-+	{"NT_STATUS_NO_BROWSER_SERVERS_FOUND",
-+	 NT_STATUS_NO_BROWSER_SERVERS_FOUND},
-+	{"NT_STATUS_VDM_HARD_ERROR", NT_STATUS_VDM_HARD_ERROR},
-+	{"NT_STATUS_DRIVER_CANCEL_TIMEOUT",
-+	 NT_STATUS_DRIVER_CANCEL_TIMEOUT},
-+	{"NT_STATUS_REPLY_MESSAGE_MISMATCH",
-+	 NT_STATUS_REPLY_MESSAGE_MISMATCH},
-+	{"NT_STATUS_MAPPED_ALIGNMENT", NT_STATUS_MAPPED_ALIGNMENT},
-+	{"NT_STATUS_IMAGE_CHECKSUM_MISMATCH",
-+	 NT_STATUS_IMAGE_CHECKSUM_MISMATCH},
-+	{"NT_STATUS_LOST_WRITEBEHIND_DATA",
-+	 NT_STATUS_LOST_WRITEBEHIND_DATA},
-+	{"NT_STATUS_CLIENT_SERVER_PARAMETERS_INVALID",
-+	 NT_STATUS_CLIENT_SERVER_PARAMETERS_INVALID},
-+	{"NT_STATUS_PASSWORD_MUST_CHANGE", NT_STATUS_PASSWORD_MUST_CHANGE},
-+	{"NT_STATUS_NOT_FOUND", NT_STATUS_NOT_FOUND},
-+	{"NT_STATUS_NOT_TINY_STREAM", NT_STATUS_NOT_TINY_STREAM},
-+	{"NT_STATUS_RECOVERY_FAILURE", NT_STATUS_RECOVERY_FAILURE},
-+	{"NT_STATUS_STACK_OVERFLOW_READ", NT_STATUS_STACK_OVERFLOW_READ},
-+	{"NT_STATUS_FAIL_CHECK", NT_STATUS_FAIL_CHECK},
-+	{"NT_STATUS_DUPLICATE_OBJECTID", NT_STATUS_DUPLICATE_OBJECTID},
-+	{"NT_STATUS_OBJECTID_EXISTS", NT_STATUS_OBJECTID_EXISTS},
-+	{"NT_STATUS_CONVERT_TO_LARGE", NT_STATUS_CONVERT_TO_LARGE},
-+	{"NT_STATUS_RETRY", NT_STATUS_RETRY},
-+	{"NT_STATUS_FOUND_OUT_OF_SCOPE", NT_STATUS_FOUND_OUT_OF_SCOPE},
-+	{"NT_STATUS_ALLOCATE_BUCKET", NT_STATUS_ALLOCATE_BUCKET},
-+	{"NT_STATUS_PROPSET_NOT_FOUND", NT_STATUS_PROPSET_NOT_FOUND},
-+	{"NT_STATUS_MARSHALL_OVERFLOW", NT_STATUS_MARSHALL_OVERFLOW},
-+	{"NT_STATUS_INVALID_VARIANT", NT_STATUS_INVALID_VARIANT},
-+	{"NT_STATUS_DOMAIN_CONTROLLER_NOT_FOUND",
-+	 NT_STATUS_DOMAIN_CONTROLLER_NOT_FOUND},
-+	{"NT_STATUS_ACCOUNT_LOCKED_OUT", NT_STATUS_ACCOUNT_LOCKED_OUT},
-+	{"NT_STATUS_HANDLE_NOT_CLOSABLE", NT_STATUS_HANDLE_NOT_CLOSABLE},
-+	{"NT_STATUS_CONNECTION_REFUSED", NT_STATUS_CONNECTION_REFUSED},
-+	{"NT_STATUS_GRACEFUL_DISCONNECT", NT_STATUS_GRACEFUL_DISCONNECT},
-+	{"NT_STATUS_ADDRESS_ALREADY_ASSOCIATED",
-+	 NT_STATUS_ADDRESS_ALREADY_ASSOCIATED},
-+	{"NT_STATUS_ADDRESS_NOT_ASSOCIATED",
-+	 NT_STATUS_ADDRESS_NOT_ASSOCIATED},
-+	{"NT_STATUS_CONNECTION_INVALID", NT_STATUS_CONNECTION_INVALID},
-+	{"NT_STATUS_CONNECTION_ACTIVE", NT_STATUS_CONNECTION_ACTIVE},
-+	{"NT_STATUS_NETWORK_UNREACHABLE", NT_STATUS_NETWORK_UNREACHABLE},
-+	{"NT_STATUS_HOST_UNREACHABLE", NT_STATUS_HOST_UNREACHABLE},
-+	{"NT_STATUS_PROTOCOL_UNREACHABLE", NT_STATUS_PROTOCOL_UNREACHABLE},
-+	{"NT_STATUS_PORT_UNREACHABLE", NT_STATUS_PORT_UNREACHABLE},
-+	{"NT_STATUS_REQUEST_ABORTED", NT_STATUS_REQUEST_ABORTED},
-+	{"NT_STATUS_CONNECTION_ABORTED", NT_STATUS_CONNECTION_ABORTED},
-+	{"NT_STATUS_BAD_COMPRESSION_BUFFER",
-+	 NT_STATUS_BAD_COMPRESSION_BUFFER},
-+	{"NT_STATUS_USER_MAPPED_FILE", NT_STATUS_USER_MAPPED_FILE},
-+	{"NT_STATUS_AUDIT_FAILED", NT_STATUS_AUDIT_FAILED},
-+	{"NT_STATUS_TIMER_RESOLUTION_NOT_SET",
-+	 NT_STATUS_TIMER_RESOLUTION_NOT_SET},
-+	{"NT_STATUS_CONNECTION_COUNT_LIMIT",
-+	 NT_STATUS_CONNECTION_COUNT_LIMIT},
-+	{"NT_STATUS_LOGIN_TIME_RESTRICTION",
-+	 NT_STATUS_LOGIN_TIME_RESTRICTION},
-+	{"NT_STATUS_LOGIN_WKSTA_RESTRICTION",
-+	 NT_STATUS_LOGIN_WKSTA_RESTRICTION},
-+	{"NT_STATUS_IMAGE_MP_UP_MISMATCH", NT_STATUS_IMAGE_MP_UP_MISMATCH},
-+	{"NT_STATUS_INSUFFICIENT_LOGON_INFO",
-+	 NT_STATUS_INSUFFICIENT_LOGON_INFO},
-+	{"NT_STATUS_BAD_DLL_ENTRYPOINT", NT_STATUS_BAD_DLL_ENTRYPOINT},
-+	{"NT_STATUS_BAD_SERVICE_ENTRYPOINT",
-+	 NT_STATUS_BAD_SERVICE_ENTRYPOINT},
-+	{"NT_STATUS_LPC_REPLY_LOST", NT_STATUS_LPC_REPLY_LOST},
-+	{"NT_STATUS_IP_ADDRESS_CONFLICT1", NT_STATUS_IP_ADDRESS_CONFLICT1},
-+	{"NT_STATUS_IP_ADDRESS_CONFLICT2", NT_STATUS_IP_ADDRESS_CONFLICT2},
-+	{"NT_STATUS_REGISTRY_QUOTA_LIMIT", NT_STATUS_REGISTRY_QUOTA_LIMIT},
-+	{"NT_STATUS_PATH_NOT_COVERED", NT_STATUS_PATH_NOT_COVERED},
-+	{"NT_STATUS_NO_CALLBACK_ACTIVE", NT_STATUS_NO_CALLBACK_ACTIVE},
-+	{"NT_STATUS_LICENSE_QUOTA_EXCEEDED",
-+	 NT_STATUS_LICENSE_QUOTA_EXCEEDED},
-+	{"NT_STATUS_PWD_TOO_SHORT", NT_STATUS_PWD_TOO_SHORT},
-+	{"NT_STATUS_PWD_TOO_RECENT", NT_STATUS_PWD_TOO_RECENT},
-+	{"NT_STATUS_PWD_HISTORY_CONFLICT", NT_STATUS_PWD_HISTORY_CONFLICT},
-+	{"NT_STATUS_PLUGPLAY_NO_DEVICE", NT_STATUS_PLUGPLAY_NO_DEVICE},
-+	{"NT_STATUS_UNSUPPORTED_COMPRESSION",
-+	 NT_STATUS_UNSUPPORTED_COMPRESSION},
-+	{"NT_STATUS_INVALID_HW_PROFILE", NT_STATUS_INVALID_HW_PROFILE},
-+	{"NT_STATUS_INVALID_PLUGPLAY_DEVICE_PATH",
-+	 NT_STATUS_INVALID_PLUGPLAY_DEVICE_PATH},
-+	{"NT_STATUS_DRIVER_ORDINAL_NOT_FOUND",
-+	 NT_STATUS_DRIVER_ORDINAL_NOT_FOUND},
-+	{"NT_STATUS_DRIVER_ENTRYPOINT_NOT_FOUND",
-+	 NT_STATUS_DRIVER_ENTRYPOINT_NOT_FOUND},
-+	{"NT_STATUS_RESOURCE_NOT_OWNED", NT_STATUS_RESOURCE_NOT_OWNED},
-+	{"NT_STATUS_TOO_MANY_LINKS", NT_STATUS_TOO_MANY_LINKS},
-+	{"NT_STATUS_QUOTA_LIST_INCONSISTENT",
-+	 NT_STATUS_QUOTA_LIST_INCONSISTENT},
-+	{"NT_STATUS_FILE_IS_OFFLINE", NT_STATUS_FILE_IS_OFFLINE},
-+	{"NT_STATUS_NO_MORE_ENTRIES", NT_STATUS_NO_MORE_ENTRIES},
-+	{"STATUS_MORE_ENTRIES", STATUS_MORE_ENTRIES},
-+	{"STATUS_SOME_UNMAPPED", STATUS_SOME_UNMAPPED},
-+	{NULL, 0}
-+};
-diff -urN linux-2.4.29.old/fs/cifs/nterr.h linux-2.4.29/fs/cifs/nterr.h
---- linux-2.4.29.old/fs/cifs/nterr.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/nterr.h	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,556 @@
-+/* 
-+   Unix SMB/Netbios implementation.
-+   Version 1.9.
-+   NT error code constants
-+   Copyright (C) Andrew Tridgell              1992-2000
-+   Copyright (C) John H Terpstra              1996-2000
-+   Copyright (C) Luke Kenneth Casson Leighton 1996-2000
-+   Copyright (C) Paul Ashton                  1998-2000
-+   
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+   
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+   
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+*/
-+
-+
-+
-+#ifndef _NTERR_H
-+#define _NTERR_H
-+
-+struct nt_err_code_struct {
-+	char *nt_errstr;
-+	__u32 nt_errcode;
-+};
-+
-+extern const struct nt_err_code_struct nt_errs[];
-+
-+/* Win32 Status codes. */
-+
-+#define STATUS_BUFFER_OVERFLOW            0x80000005
-+#define STATUS_MORE_ENTRIES               0x0105
-+#define ERROR_INVALID_PARAMETER		  0x0057
-+#define ERROR_INSUFFICIENT_BUFFER	  0x007a
-+#define STATUS_1804	                  0x070c
-+#define STATUS_NOTIFY_ENUM_DIR            0x010c
-+
-+/* Win32 Error codes extracted using a loop in smbclient then printing a
-+   netmon sniff to a file. */
-+
-+#define NT_STATUS_OK 0x0000
-+#define STATUS_SOME_UNMAPPED       0x0107
-+#define STATUS_BUFFER_OVERFLOW     0x80000005
-+#define NT_STATUS_NO_MORE_ENTRIES  0x8000001a
-+#define NT_STATUS_UNSUCCESSFUL 0xC0000000 | 0x0001
-+#define NT_STATUS_NOT_IMPLEMENTED 0xC0000000 | 0x0002
-+#define NT_STATUS_INVALID_INFO_CLASS 0xC0000000 | 0x0003
-+#define NT_STATUS_INFO_LENGTH_MISMATCH 0xC0000000 | 0x0004
-+#define NT_STATUS_ACCESS_VIOLATION 0xC0000000 | 0x0005
-+#define NT_STATUS_IN_PAGE_ERROR 0xC0000000 | 0x0006
-+#define NT_STATUS_PAGEFILE_QUOTA 0xC0000000 | 0x0007
-+#define NT_STATUS_INVALID_HANDLE 0xC0000000 | 0x0008
-+#define NT_STATUS_BAD_INITIAL_STACK 0xC0000000 | 0x0009
-+#define NT_STATUS_BAD_INITIAL_PC 0xC0000000 | 0x000a
-+#define NT_STATUS_INVALID_CID 0xC0000000 | 0x000b
-+#define NT_STATUS_TIMER_NOT_CANCELED 0xC0000000 | 0x000c
-+#define NT_STATUS_INVALID_PARAMETER 0xC0000000 | 0x000d
-+#define NT_STATUS_NO_SUCH_DEVICE 0xC0000000 | 0x000e
-+#define NT_STATUS_NO_SUCH_FILE 0xC0000000 | 0x000f
-+#define NT_STATUS_INVALID_DEVICE_REQUEST 0xC0000000 | 0x0010
-+#define NT_STATUS_END_OF_FILE 0xC0000000 | 0x0011
-+#define NT_STATUS_WRONG_VOLUME 0xC0000000 | 0x0012
-+#define NT_STATUS_NO_MEDIA_IN_DEVICE 0xC0000000 | 0x0013
-+#define NT_STATUS_UNRECOGNIZED_MEDIA 0xC0000000 | 0x0014
-+#define NT_STATUS_NONEXISTENT_SECTOR 0xC0000000 | 0x0015
-+#define NT_STATUS_MORE_PROCESSING_REQUIRED 0xC0000000 | 0x0016
-+#define NT_STATUS_NO_MEMORY 0xC0000000 | 0x0017
-+#define NT_STATUS_CONFLICTING_ADDRESSES 0xC0000000 | 0x0018
-+#define NT_STATUS_NOT_MAPPED_VIEW 0xC0000000 | 0x0019
-+#define NT_STATUS_UNABLE_TO_FREE_VM 0x80000000 | 0x001a
-+#define NT_STATUS_UNABLE_TO_DELETE_SECTION 0xC0000000 | 0x001b
-+#define NT_STATUS_INVALID_SYSTEM_SERVICE 0xC0000000 | 0x001c
-+#define NT_STATUS_ILLEGAL_INSTRUCTION 0xC0000000 | 0x001d
-+#define NT_STATUS_INVALID_LOCK_SEQUENCE 0xC0000000 | 0x001e
-+#define NT_STATUS_INVALID_VIEW_SIZE 0xC0000000 | 0x001f
-+#define NT_STATUS_INVALID_FILE_FOR_SECTION 0xC0000000 | 0x0020
-+#define NT_STATUS_ALREADY_COMMITTED 0xC0000000 | 0x0021
-+#define NT_STATUS_ACCESS_DENIED 0xC0000000 | 0x0022
-+#define NT_STATUS_BUFFER_TOO_SMALL 0xC0000000 | 0x0023
-+#define NT_STATUS_OBJECT_TYPE_MISMATCH 0xC0000000 | 0x0024
-+#define NT_STATUS_NONCONTINUABLE_EXCEPTION 0xC0000000 | 0x0025
-+#define NT_STATUS_INVALID_DISPOSITION 0xC0000000 | 0x0026
-+#define NT_STATUS_UNWIND 0xC0000000 | 0x0027
-+#define NT_STATUS_BAD_STACK 0xC0000000 | 0x0028
-+#define NT_STATUS_INVALID_UNWIND_TARGET 0xC0000000 | 0x0029
-+#define NT_STATUS_NOT_LOCKED 0xC0000000 | 0x002a
-+#define NT_STATUS_PARITY_ERROR 0xC0000000 | 0x002b
-+#define NT_STATUS_UNABLE_TO_DECOMMIT_VM 0xC0000000 | 0x002c
-+#define NT_STATUS_NOT_COMMITTED 0xC0000000 | 0x002d
-+#define NT_STATUS_INVALID_PORT_ATTRIBUTES 0xC0000000 | 0x002e
-+#define NT_STATUS_PORT_MESSAGE_TOO_LONG 0xC0000000 | 0x002f
-+#define NT_STATUS_INVALID_PARAMETER_MIX 0xC0000000 | 0x0030
-+#define NT_STATUS_INVALID_QUOTA_LOWER 0xC0000000 | 0x0031
-+#define NT_STATUS_DISK_CORRUPT_ERROR 0xC0000000 | 0x0032
-+#define NT_STATUS_OBJECT_NAME_INVALID 0xC0000000 | 0x0033
-+#define NT_STATUS_OBJECT_NAME_NOT_FOUND 0xC0000000 | 0x0034
-+#define NT_STATUS_OBJECT_NAME_COLLISION 0xC0000000 | 0x0035
-+#define NT_STATUS_HANDLE_NOT_WAITABLE 0xC0000000 | 0x0036
-+#define NT_STATUS_PORT_DISCONNECTED 0xC0000000 | 0x0037
-+#define NT_STATUS_DEVICE_ALREADY_ATTACHED 0xC0000000 | 0x0038
-+#define NT_STATUS_OBJECT_PATH_INVALID 0xC0000000 | 0x0039
-+#define NT_STATUS_OBJECT_PATH_NOT_FOUND 0xC0000000 | 0x003a
-+#define NT_STATUS_OBJECT_PATH_SYNTAX_BAD 0xC0000000 | 0x003b
-+#define NT_STATUS_DATA_OVERRUN 0xC0000000 | 0x003c
-+#define NT_STATUS_DATA_LATE_ERROR 0xC0000000 | 0x003d
-+#define NT_STATUS_DATA_ERROR 0xC0000000 | 0x003e
-+#define NT_STATUS_CRC_ERROR 0xC0000000 | 0x003f
-+#define NT_STATUS_SECTION_TOO_BIG 0xC0000000 | 0x0040
-+#define NT_STATUS_PORT_CONNECTION_REFUSED 0xC0000000 | 0x0041
-+#define NT_STATUS_INVALID_PORT_HANDLE 0xC0000000 | 0x0042
-+#define NT_STATUS_SHARING_VIOLATION 0xC0000000 | 0x0043
-+#define NT_STATUS_QUOTA_EXCEEDED 0xC0000000 | 0x0044
-+#define NT_STATUS_INVALID_PAGE_PROTECTION 0xC0000000 | 0x0045
-+#define NT_STATUS_MUTANT_NOT_OWNED 0xC0000000 | 0x0046
-+#define NT_STATUS_SEMAPHORE_LIMIT_EXCEEDED 0xC0000000 | 0x0047
-+#define NT_STATUS_PORT_ALREADY_SET 0xC0000000 | 0x0048
-+#define NT_STATUS_SECTION_NOT_IMAGE 0xC0000000 | 0x0049
-+#define NT_STATUS_SUSPEND_COUNT_EXCEEDED 0xC0000000 | 0x004a
-+#define NT_STATUS_THREAD_IS_TERMINATING 0xC0000000 | 0x004b
-+#define NT_STATUS_BAD_WORKING_SET_LIMIT 0xC0000000 | 0x004c
-+#define NT_STATUS_INCOMPATIBLE_FILE_MAP 0xC0000000 | 0x004d
-+#define NT_STATUS_SECTION_PROTECTION 0xC0000000 | 0x004e
-+#define NT_STATUS_EAS_NOT_SUPPORTED 0xC0000000 | 0x004f
-+#define NT_STATUS_EA_TOO_LARGE 0xC0000000 | 0x0050
-+#define NT_STATUS_NONEXISTENT_EA_ENTRY 0xC0000000 | 0x0051
-+#define NT_STATUS_NO_EAS_ON_FILE 0xC0000000 | 0x0052
-+#define NT_STATUS_EA_CORRUPT_ERROR 0xC0000000 | 0x0053
-+#define NT_STATUS_FILE_LOCK_CONFLICT 0xC0000000 | 0x0054
-+#define NT_STATUS_LOCK_NOT_GRANTED 0xC0000000 | 0x0055
-+#define NT_STATUS_DELETE_PENDING 0xC0000000 | 0x0056
-+#define NT_STATUS_CTL_FILE_NOT_SUPPORTED 0xC0000000 | 0x0057
-+#define NT_STATUS_UNKNOWN_REVISION 0xC0000000 | 0x0058
-+#define NT_STATUS_REVISION_MISMATCH 0xC0000000 | 0x0059
-+#define NT_STATUS_INVALID_OWNER 0xC0000000 | 0x005a
-+#define NT_STATUS_INVALID_PRIMARY_GROUP 0xC0000000 | 0x005b
-+#define NT_STATUS_NO_IMPERSONATION_TOKEN 0xC0000000 | 0x005c
-+#define NT_STATUS_CANT_DISABLE_MANDATORY 0xC0000000 | 0x005d
-+#define NT_STATUS_NO_LOGON_SERVERS 0xC0000000 | 0x005e
-+#define NT_STATUS_NO_SUCH_LOGON_SESSION 0xC0000000 | 0x005f
-+#define NT_STATUS_NO_SUCH_PRIVILEGE 0xC0000000 | 0x0060
-+#define NT_STATUS_PRIVILEGE_NOT_HELD 0xC0000000 | 0x0061
-+#define NT_STATUS_INVALID_ACCOUNT_NAME 0xC0000000 | 0x0062
-+#define NT_STATUS_USER_EXISTS 0xC0000000 | 0x0063
-+#define NT_STATUS_NO_SUCH_USER 0xC0000000 | 0x0064
-+#define NT_STATUS_GROUP_EXISTS 0xC0000000 | 0x0065
-+#define NT_STATUS_NO_SUCH_GROUP 0xC0000000 | 0x0066
-+#define NT_STATUS_MEMBER_IN_GROUP 0xC0000000 | 0x0067
-+#define NT_STATUS_MEMBER_NOT_IN_GROUP 0xC0000000 | 0x0068
-+#define NT_STATUS_LAST_ADMIN 0xC0000000 | 0x0069
-+#define NT_STATUS_WRONG_PASSWORD 0xC0000000 | 0x006a
-+#define NT_STATUS_ILL_FORMED_PASSWORD 0xC0000000 | 0x006b
-+#define NT_STATUS_PASSWORD_RESTRICTION 0xC0000000 | 0x006c
-+#define NT_STATUS_LOGON_FAILURE 0xC0000000 | 0x006d
-+#define NT_STATUS_ACCOUNT_RESTRICTION 0xC0000000 | 0x006e
-+#define NT_STATUS_INVALID_LOGON_HOURS 0xC0000000 | 0x006f
-+#define NT_STATUS_INVALID_WORKSTATION 0xC0000000 | 0x0070
-+#define NT_STATUS_PASSWORD_EXPIRED 0xC0000000 | 0x0071
-+#define NT_STATUS_ACCOUNT_DISABLED 0xC0000000 | 0x0072
-+#define NT_STATUS_NONE_MAPPED 0xC0000000 | 0x0073
-+#define NT_STATUS_TOO_MANY_LUIDS_REQUESTED 0xC0000000 | 0x0074
-+#define NT_STATUS_LUIDS_EXHAUSTED 0xC0000000 | 0x0075
-+#define NT_STATUS_INVALID_SUB_AUTHORITY 0xC0000000 | 0x0076
-+#define NT_STATUS_INVALID_ACL 0xC0000000 | 0x0077
-+#define NT_STATUS_INVALID_SID 0xC0000000 | 0x0078
-+#define NT_STATUS_INVALID_SECURITY_DESCR 0xC0000000 | 0x0079
-+#define NT_STATUS_PROCEDURE_NOT_FOUND 0xC0000000 | 0x007a
-+#define NT_STATUS_INVALID_IMAGE_FORMAT 0xC0000000 | 0x007b
-+#define NT_STATUS_NO_TOKEN 0xC0000000 | 0x007c
-+#define NT_STATUS_BAD_INHERITANCE_ACL 0xC0000000 | 0x007d
-+#define NT_STATUS_RANGE_NOT_LOCKED 0xC0000000 | 0x007e
-+#define NT_STATUS_DISK_FULL 0xC0000000 | 0x007f
-+#define NT_STATUS_SERVER_DISABLED 0xC0000000 | 0x0080
-+#define NT_STATUS_SERVER_NOT_DISABLED 0xC0000000 | 0x0081
-+#define NT_STATUS_TOO_MANY_GUIDS_REQUESTED 0xC0000000 | 0x0082
-+#define NT_STATUS_GUIDS_EXHAUSTED 0xC0000000 | 0x0083
-+#define NT_STATUS_INVALID_ID_AUTHORITY 0xC0000000 | 0x0084
-+#define NT_STATUS_AGENTS_EXHAUSTED 0xC0000000 | 0x0085
-+#define NT_STATUS_INVALID_VOLUME_LABEL 0xC0000000 | 0x0086
-+#define NT_STATUS_SECTION_NOT_EXTENDED 0xC0000000 | 0x0087
-+#define NT_STATUS_NOT_MAPPED_DATA 0xC0000000 | 0x0088
-+#define NT_STATUS_RESOURCE_DATA_NOT_FOUND 0xC0000000 | 0x0089
-+#define NT_STATUS_RESOURCE_TYPE_NOT_FOUND 0xC0000000 | 0x008a
-+#define NT_STATUS_RESOURCE_NAME_NOT_FOUND 0xC0000000 | 0x008b
-+#define NT_STATUS_ARRAY_BOUNDS_EXCEEDED 0xC0000000 | 0x008c
-+#define NT_STATUS_FLOAT_DENORMAL_OPERAND 0xC0000000 | 0x008d
-+#define NT_STATUS_FLOAT_DIVIDE_BY_ZERO 0xC0000000 | 0x008e
-+#define NT_STATUS_FLOAT_INEXACT_RESULT 0xC0000000 | 0x008f
-+#define NT_STATUS_FLOAT_INVALID_OPERATION 0xC0000000 | 0x0090
-+#define NT_STATUS_FLOAT_OVERFLOW 0xC0000000 | 0x0091
-+#define NT_STATUS_FLOAT_STACK_CHECK 0xC0000000 | 0x0092
-+#define NT_STATUS_FLOAT_UNDERFLOW 0xC0000000 | 0x0093
-+#define NT_STATUS_INTEGER_DIVIDE_BY_ZERO 0xC0000000 | 0x0094
-+#define NT_STATUS_INTEGER_OVERFLOW 0xC0000000 | 0x0095
-+#define NT_STATUS_PRIVILEGED_INSTRUCTION 0xC0000000 | 0x0096
-+#define NT_STATUS_TOO_MANY_PAGING_FILES 0xC0000000 | 0x0097
-+#define NT_STATUS_FILE_INVALID 0xC0000000 | 0x0098
-+#define NT_STATUS_ALLOTTED_SPACE_EXCEEDED 0xC0000000 | 0x0099
-+#define NT_STATUS_INSUFFICIENT_RESOURCES 0xC0000000 | 0x009a
-+#define NT_STATUS_DFS_EXIT_PATH_FOUND 0xC0000000 | 0x009b
-+#define NT_STATUS_DEVICE_DATA_ERROR 0xC0000000 | 0x009c
-+#define NT_STATUS_DEVICE_NOT_CONNECTED 0xC0000000 | 0x009d
-+#define NT_STATUS_DEVICE_POWER_FAILURE 0xC0000000 | 0x009e
-+#define NT_STATUS_FREE_VM_NOT_AT_BASE 0xC0000000 | 0x009f
-+#define NT_STATUS_MEMORY_NOT_ALLOCATED 0xC0000000 | 0x00a0
-+#define NT_STATUS_WORKING_SET_QUOTA 0xC0000000 | 0x00a1
-+#define NT_STATUS_MEDIA_WRITE_PROTECTED 0xC0000000 | 0x00a2
-+#define NT_STATUS_DEVICE_NOT_READY 0xC0000000 | 0x00a3
-+#define NT_STATUS_INVALID_GROUP_ATTRIBUTES 0xC0000000 | 0x00a4
-+#define NT_STATUS_BAD_IMPERSONATION_LEVEL 0xC0000000 | 0x00a5
-+#define NT_STATUS_CANT_OPEN_ANONYMOUS 0xC0000000 | 0x00a6
-+#define NT_STATUS_BAD_VALIDATION_CLASS 0xC0000000 | 0x00a7
-+#define NT_STATUS_BAD_TOKEN_TYPE 0xC0000000 | 0x00a8
-+#define NT_STATUS_BAD_MASTER_BOOT_RECORD 0xC0000000 | 0x00a9
-+#define NT_STATUS_INSTRUCTION_MISALIGNMENT 0xC0000000 | 0x00aa
-+#define NT_STATUS_INSTANCE_NOT_AVAILABLE 0xC0000000 | 0x00ab
-+#define NT_STATUS_PIPE_NOT_AVAILABLE 0xC0000000 | 0x00ac
-+#define NT_STATUS_INVALID_PIPE_STATE 0xC0000000 | 0x00ad
-+#define NT_STATUS_PIPE_BUSY 0xC0000000 | 0x00ae
-+#define NT_STATUS_ILLEGAL_FUNCTION 0xC0000000 | 0x00af
-+#define NT_STATUS_PIPE_DISCONNECTED 0xC0000000 | 0x00b0
-+#define NT_STATUS_PIPE_CLOSING 0xC0000000 | 0x00b1
-+#define NT_STATUS_PIPE_CONNECTED 0xC0000000 | 0x00b2
-+#define NT_STATUS_PIPE_LISTENING 0xC0000000 | 0x00b3
-+#define NT_STATUS_INVALID_READ_MODE 0xC0000000 | 0x00b4
-+#define NT_STATUS_IO_TIMEOUT 0xC0000000 | 0x00b5
-+#define NT_STATUS_FILE_FORCED_CLOSED 0xC0000000 | 0x00b6
-+#define NT_STATUS_PROFILING_NOT_STARTED 0xC0000000 | 0x00b7
-+#define NT_STATUS_PROFILING_NOT_STOPPED 0xC0000000 | 0x00b8
-+#define NT_STATUS_COULD_NOT_INTERPRET 0xC0000000 | 0x00b9
-+#define NT_STATUS_FILE_IS_A_DIRECTORY 0xC0000000 | 0x00ba
-+#define NT_STATUS_NOT_SUPPORTED 0xC0000000 | 0x00bb
-+#define NT_STATUS_REMOTE_NOT_LISTENING 0xC0000000 | 0x00bc
-+#define NT_STATUS_DUPLICATE_NAME 0xC0000000 | 0x00bd
-+#define NT_STATUS_BAD_NETWORK_PATH 0xC0000000 | 0x00be
-+#define NT_STATUS_NETWORK_BUSY 0xC0000000 | 0x00bf
-+#define NT_STATUS_DEVICE_DOES_NOT_EXIST 0xC0000000 | 0x00c0
-+#define NT_STATUS_TOO_MANY_COMMANDS 0xC0000000 | 0x00c1
-+#define NT_STATUS_ADAPTER_HARDWARE_ERROR 0xC0000000 | 0x00c2
-+#define NT_STATUS_INVALID_NETWORK_RESPONSE 0xC0000000 | 0x00c3
-+#define NT_STATUS_UNEXPECTED_NETWORK_ERROR 0xC0000000 | 0x00c4
-+#define NT_STATUS_BAD_REMOTE_ADAPTER 0xC0000000 | 0x00c5
-+#define NT_STATUS_PRINT_QUEUE_FULL 0xC0000000 | 0x00c6
-+#define NT_STATUS_NO_SPOOL_SPACE 0xC0000000 | 0x00c7
-+#define NT_STATUS_PRINT_CANCELLED 0xC0000000 | 0x00c8
-+#define NT_STATUS_NETWORK_NAME_DELETED 0xC0000000 | 0x00c9
-+#define NT_STATUS_NETWORK_ACCESS_DENIED 0xC0000000 | 0x00ca
-+#define NT_STATUS_BAD_DEVICE_TYPE 0xC0000000 | 0x00cb
-+#define NT_STATUS_BAD_NETWORK_NAME 0xC0000000 | 0x00cc
-+#define NT_STATUS_TOO_MANY_NAMES 0xC0000000 | 0x00cd
-+#define NT_STATUS_TOO_MANY_SESSIONS 0xC0000000 | 0x00ce
-+#define NT_STATUS_SHARING_PAUSED 0xC0000000 | 0x00cf
-+#define NT_STATUS_REQUEST_NOT_ACCEPTED 0xC0000000 | 0x00d0
-+#define NT_STATUS_REDIRECTOR_PAUSED 0xC0000000 | 0x00d1
-+#define NT_STATUS_NET_WRITE_FAULT 0xC0000000 | 0x00d2
-+#define NT_STATUS_PROFILING_AT_LIMIT 0xC0000000 | 0x00d3
-+#define NT_STATUS_NOT_SAME_DEVICE 0xC0000000 | 0x00d4
-+#define NT_STATUS_FILE_RENAMED 0xC0000000 | 0x00d5
-+#define NT_STATUS_VIRTUAL_CIRCUIT_CLOSED 0xC0000000 | 0x00d6
-+#define NT_STATUS_NO_SECURITY_ON_OBJECT 0xC0000000 | 0x00d7
-+#define NT_STATUS_CANT_WAIT 0xC0000000 | 0x00d8
-+#define NT_STATUS_PIPE_EMPTY 0xC0000000 | 0x00d9
-+#define NT_STATUS_CANT_ACCESS_DOMAIN_INFO 0xC0000000 | 0x00da
-+#define NT_STATUS_CANT_TERMINATE_SELF 0xC0000000 | 0x00db
-+#define NT_STATUS_INVALID_SERVER_STATE 0xC0000000 | 0x00dc
-+#define NT_STATUS_INVALID_DOMAIN_STATE 0xC0000000 | 0x00dd
-+#define NT_STATUS_INVALID_DOMAIN_ROLE 0xC0000000 | 0x00de
-+#define NT_STATUS_NO_SUCH_DOMAIN 0xC0000000 | 0x00df
-+#define NT_STATUS_DOMAIN_EXISTS 0xC0000000 | 0x00e0
-+#define NT_STATUS_DOMAIN_LIMIT_EXCEEDED 0xC0000000 | 0x00e1
-+#define NT_STATUS_OPLOCK_NOT_GRANTED 0xC0000000 | 0x00e2
-+#define NT_STATUS_INVALID_OPLOCK_PROTOCOL 0xC0000000 | 0x00e3
-+#define NT_STATUS_INTERNAL_DB_CORRUPTION 0xC0000000 | 0x00e4
-+#define NT_STATUS_INTERNAL_ERROR 0xC0000000 | 0x00e5
-+#define NT_STATUS_GENERIC_NOT_MAPPED 0xC0000000 | 0x00e6
-+#define NT_STATUS_BAD_DESCRIPTOR_FORMAT 0xC0000000 | 0x00e7
-+#define NT_STATUS_INVALID_USER_BUFFER 0xC0000000 | 0x00e8
-+#define NT_STATUS_UNEXPECTED_IO_ERROR 0xC0000000 | 0x00e9
-+#define NT_STATUS_UNEXPECTED_MM_CREATE_ERR 0xC0000000 | 0x00ea
-+#define NT_STATUS_UNEXPECTED_MM_MAP_ERROR 0xC0000000 | 0x00eb
-+#define NT_STATUS_UNEXPECTED_MM_EXTEND_ERR 0xC0000000 | 0x00ec
-+#define NT_STATUS_NOT_LOGON_PROCESS 0xC0000000 | 0x00ed
-+#define NT_STATUS_LOGON_SESSION_EXISTS 0xC0000000 | 0x00ee
-+#define NT_STATUS_INVALID_PARAMETER_1 0xC0000000 | 0x00ef
-+#define NT_STATUS_INVALID_PARAMETER_2 0xC0000000 | 0x00f0
-+#define NT_STATUS_INVALID_PARAMETER_3 0xC0000000 | 0x00f1
-+#define NT_STATUS_INVALID_PARAMETER_4 0xC0000000 | 0x00f2
-+#define NT_STATUS_INVALID_PARAMETER_5 0xC0000000 | 0x00f3
-+#define NT_STATUS_INVALID_PARAMETER_6 0xC0000000 | 0x00f4
-+#define NT_STATUS_INVALID_PARAMETER_7 0xC0000000 | 0x00f5
-+#define NT_STATUS_INVALID_PARAMETER_8 0xC0000000 | 0x00f6
-+#define NT_STATUS_INVALID_PARAMETER_9 0xC0000000 | 0x00f7
-+#define NT_STATUS_INVALID_PARAMETER_10 0xC0000000 | 0x00f8
-+#define NT_STATUS_INVALID_PARAMETER_11 0xC0000000 | 0x00f9
-+#define NT_STATUS_INVALID_PARAMETER_12 0xC0000000 | 0x00fa
-+#define NT_STATUS_REDIRECTOR_NOT_STARTED 0xC0000000 | 0x00fb
-+#define NT_STATUS_REDIRECTOR_STARTED 0xC0000000 | 0x00fc
-+#define NT_STATUS_STACK_OVERFLOW 0xC0000000 | 0x00fd
-+#define NT_STATUS_NO_SUCH_PACKAGE 0xC0000000 | 0x00fe
-+#define NT_STATUS_BAD_FUNCTION_TABLE 0xC0000000 | 0x00ff
-+#define NT_STATUS_DIRECTORY_NOT_EMPTY 0xC0000000 | 0x0101
-+#define NT_STATUS_FILE_CORRUPT_ERROR 0xC0000000 | 0x0102
-+#define NT_STATUS_NOT_A_DIRECTORY 0xC0000000 | 0x0103
-+#define NT_STATUS_BAD_LOGON_SESSION_STATE 0xC0000000 | 0x0104
-+#define NT_STATUS_LOGON_SESSION_COLLISION 0xC0000000 | 0x0105
-+#define NT_STATUS_NAME_TOO_LONG 0xC0000000 | 0x0106
-+#define NT_STATUS_FILES_OPEN 0xC0000000 | 0x0107
-+#define NT_STATUS_CONNECTION_IN_USE 0xC0000000 | 0x0108
-+#define NT_STATUS_MESSAGE_NOT_FOUND 0xC0000000 | 0x0109
-+#define NT_STATUS_PROCESS_IS_TERMINATING 0xC0000000 | 0x010a
-+#define NT_STATUS_INVALID_LOGON_TYPE 0xC0000000 | 0x010b
-+#define NT_STATUS_NO_GUID_TRANSLATION 0xC0000000 | 0x010c
-+#define NT_STATUS_CANNOT_IMPERSONATE 0xC0000000 | 0x010d
-+#define NT_STATUS_IMAGE_ALREADY_LOADED 0xC0000000 | 0x010e
-+#define NT_STATUS_ABIOS_NOT_PRESENT 0xC0000000 | 0x010f
-+#define NT_STATUS_ABIOS_LID_NOT_EXIST 0xC0000000 | 0x0110
-+#define NT_STATUS_ABIOS_LID_ALREADY_OWNED 0xC0000000 | 0x0111
-+#define NT_STATUS_ABIOS_NOT_LID_OWNER 0xC0000000 | 0x0112
-+#define NT_STATUS_ABIOS_INVALID_COMMAND 0xC0000000 | 0x0113
-+#define NT_STATUS_ABIOS_INVALID_LID 0xC0000000 | 0x0114
-+#define NT_STATUS_ABIOS_SELECTOR_NOT_AVAILABLE 0xC0000000 | 0x0115
-+#define NT_STATUS_ABIOS_INVALID_SELECTOR 0xC0000000 | 0x0116
-+#define NT_STATUS_NO_LDT 0xC0000000 | 0x0117
-+#define NT_STATUS_INVALID_LDT_SIZE 0xC0000000 | 0x0118
-+#define NT_STATUS_INVALID_LDT_OFFSET 0xC0000000 | 0x0119
-+#define NT_STATUS_INVALID_LDT_DESCRIPTOR 0xC0000000 | 0x011a
-+#define NT_STATUS_INVALID_IMAGE_NE_FORMAT 0xC0000000 | 0x011b
-+#define NT_STATUS_RXACT_INVALID_STATE 0xC0000000 | 0x011c
-+#define NT_STATUS_RXACT_COMMIT_FAILURE 0xC0000000 | 0x011d
-+#define NT_STATUS_MAPPED_FILE_SIZE_ZERO 0xC0000000 | 0x011e
-+#define NT_STATUS_TOO_MANY_OPENED_FILES 0xC0000000 | 0x011f
-+#define NT_STATUS_CANCELLED 0xC0000000 | 0x0120
-+#define NT_STATUS_CANNOT_DELETE 0xC0000000 | 0x0121
-+#define NT_STATUS_INVALID_COMPUTER_NAME 0xC0000000 | 0x0122
-+#define NT_STATUS_FILE_DELETED 0xC0000000 | 0x0123
-+#define NT_STATUS_SPECIAL_ACCOUNT 0xC0000000 | 0x0124
-+#define NT_STATUS_SPECIAL_GROUP 0xC0000000 | 0x0125
-+#define NT_STATUS_SPECIAL_USER 0xC0000000 | 0x0126
-+#define NT_STATUS_MEMBERS_PRIMARY_GROUP 0xC0000000 | 0x0127
-+#define NT_STATUS_FILE_CLOSED 0xC0000000 | 0x0128
-+#define NT_STATUS_TOO_MANY_THREADS 0xC0000000 | 0x0129
-+#define NT_STATUS_THREAD_NOT_IN_PROCESS 0xC0000000 | 0x012a
-+#define NT_STATUS_TOKEN_ALREADY_IN_USE 0xC0000000 | 0x012b
-+#define NT_STATUS_PAGEFILE_QUOTA_EXCEEDED 0xC0000000 | 0x012c
-+#define NT_STATUS_COMMITMENT_LIMIT 0xC0000000 | 0x012d
-+#define NT_STATUS_INVALID_IMAGE_LE_FORMAT 0xC0000000 | 0x012e
-+#define NT_STATUS_INVALID_IMAGE_NOT_MZ 0xC0000000 | 0x012f
-+#define NT_STATUS_INVALID_IMAGE_PROTECT 0xC0000000 | 0x0130
-+#define NT_STATUS_INVALID_IMAGE_WIN_16 0xC0000000 | 0x0131
-+#define NT_STATUS_LOGON_SERVER_CONFLICT 0xC0000000 | 0x0132
-+#define NT_STATUS_TIME_DIFFERENCE_AT_DC 0xC0000000 | 0x0133
-+#define NT_STATUS_SYNCHRONIZATION_REQUIRED 0xC0000000 | 0x0134
-+#define NT_STATUS_DLL_NOT_FOUND 0xC0000000 | 0x0135
-+#define NT_STATUS_OPEN_FAILED 0xC0000000 | 0x0136
-+#define NT_STATUS_IO_PRIVILEGE_FAILED 0xC0000000 | 0x0137
-+#define NT_STATUS_ORDINAL_NOT_FOUND 0xC0000000 | 0x0138
-+#define NT_STATUS_ENTRYPOINT_NOT_FOUND 0xC0000000 | 0x0139
-+#define NT_STATUS_CONTROL_C_EXIT 0xC0000000 | 0x013a
-+#define NT_STATUS_LOCAL_DISCONNECT 0xC0000000 | 0x013b
-+#define NT_STATUS_REMOTE_DISCONNECT 0xC0000000 | 0x013c
-+#define NT_STATUS_REMOTE_RESOURCES 0xC0000000 | 0x013d
-+#define NT_STATUS_LINK_FAILED 0xC0000000 | 0x013e
-+#define NT_STATUS_LINK_TIMEOUT 0xC0000000 | 0x013f
-+#define NT_STATUS_INVALID_CONNECTION 0xC0000000 | 0x0140
-+#define NT_STATUS_INVALID_ADDRESS 0xC0000000 | 0x0141
-+#define NT_STATUS_DLL_INIT_FAILED 0xC0000000 | 0x0142
-+#define NT_STATUS_MISSING_SYSTEMFILE 0xC0000000 | 0x0143
-+#define NT_STATUS_UNHANDLED_EXCEPTION 0xC0000000 | 0x0144
-+#define NT_STATUS_APP_INIT_FAILURE 0xC0000000 | 0x0145
-+#define NT_STATUS_PAGEFILE_CREATE_FAILED 0xC0000000 | 0x0146
-+#define NT_STATUS_NO_PAGEFILE 0xC0000000 | 0x0147
-+#define NT_STATUS_INVALID_LEVEL 0xC0000000 | 0x0148
-+#define NT_STATUS_WRONG_PASSWORD_CORE 0xC0000000 | 0x0149
-+#define NT_STATUS_ILLEGAL_FLOAT_CONTEXT 0xC0000000 | 0x014a
-+#define NT_STATUS_PIPE_BROKEN 0xC0000000 | 0x014b
-+#define NT_STATUS_REGISTRY_CORRUPT 0xC0000000 | 0x014c
-+#define NT_STATUS_REGISTRY_IO_FAILED 0xC0000000 | 0x014d
-+#define NT_STATUS_NO_EVENT_PAIR 0xC0000000 | 0x014e
-+#define NT_STATUS_UNRECOGNIZED_VOLUME 0xC0000000 | 0x014f
-+#define NT_STATUS_SERIAL_NO_DEVICE_INITED 0xC0000000 | 0x0150
-+#define NT_STATUS_NO_SUCH_ALIAS 0xC0000000 | 0x0151
-+#define NT_STATUS_MEMBER_NOT_IN_ALIAS 0xC0000000 | 0x0152
-+#define NT_STATUS_MEMBER_IN_ALIAS 0xC0000000 | 0x0153
-+#define NT_STATUS_ALIAS_EXISTS 0xC0000000 | 0x0154
-+#define NT_STATUS_LOGON_NOT_GRANTED 0xC0000000 | 0x0155
-+#define NT_STATUS_TOO_MANY_SECRETS 0xC0000000 | 0x0156
-+#define NT_STATUS_SECRET_TOO_LONG 0xC0000000 | 0x0157
-+#define NT_STATUS_INTERNAL_DB_ERROR 0xC0000000 | 0x0158
-+#define NT_STATUS_FULLSCREEN_MODE 0xC0000000 | 0x0159
-+#define NT_STATUS_TOO_MANY_CONTEXT_IDS 0xC0000000 | 0x015a
-+#define NT_STATUS_LOGON_TYPE_NOT_GRANTED 0xC0000000 | 0x015b
-+#define NT_STATUS_NOT_REGISTRY_FILE 0xC0000000 | 0x015c
-+#define NT_STATUS_NT_CROSS_ENCRYPTION_REQUIRED 0xC0000000 | 0x015d
-+#define NT_STATUS_DOMAIN_CTRLR_CONFIG_ERROR 0xC0000000 | 0x015e
-+#define NT_STATUS_FT_MISSING_MEMBER 0xC0000000 | 0x015f
-+#define NT_STATUS_ILL_FORMED_SERVICE_ENTRY 0xC0000000 | 0x0160
-+#define NT_STATUS_ILLEGAL_CHARACTER 0xC0000000 | 0x0161
-+#define NT_STATUS_UNMAPPABLE_CHARACTER 0xC0000000 | 0x0162
-+#define NT_STATUS_UNDEFINED_CHARACTER 0xC0000000 | 0x0163
-+#define NT_STATUS_FLOPPY_VOLUME 0xC0000000 | 0x0164
-+#define NT_STATUS_FLOPPY_ID_MARK_NOT_FOUND 0xC0000000 | 0x0165
-+#define NT_STATUS_FLOPPY_WRONG_CYLINDER 0xC0000000 | 0x0166
-+#define NT_STATUS_FLOPPY_UNKNOWN_ERROR 0xC0000000 | 0x0167
-+#define NT_STATUS_FLOPPY_BAD_REGISTERS 0xC0000000 | 0x0168
-+#define NT_STATUS_DISK_RECALIBRATE_FAILED 0xC0000000 | 0x0169
-+#define NT_STATUS_DISK_OPERATION_FAILED 0xC0000000 | 0x016a
-+#define NT_STATUS_DISK_RESET_FAILED 0xC0000000 | 0x016b
-+#define NT_STATUS_SHARED_IRQ_BUSY 0xC0000000 | 0x016c
-+#define NT_STATUS_FT_ORPHANING 0xC0000000 | 0x016d
-+#define NT_STATUS_PARTITION_FAILURE 0xC0000000 | 0x0172
-+#define NT_STATUS_INVALID_BLOCK_LENGTH 0xC0000000 | 0x0173
-+#define NT_STATUS_DEVICE_NOT_PARTITIONED 0xC0000000 | 0x0174
-+#define NT_STATUS_UNABLE_TO_LOCK_MEDIA 0xC0000000 | 0x0175
-+#define NT_STATUS_UNABLE_TO_UNLOAD_MEDIA 0xC0000000 | 0x0176
-+#define NT_STATUS_EOM_OVERFLOW 0xC0000000 | 0x0177
-+#define NT_STATUS_NO_MEDIA 0xC0000000 | 0x0178
-+#define NT_STATUS_NO_SUCH_MEMBER 0xC0000000 | 0x017a
-+#define NT_STATUS_INVALID_MEMBER 0xC0000000 | 0x017b
-+#define NT_STATUS_KEY_DELETED 0xC0000000 | 0x017c
-+#define NT_STATUS_NO_LOG_SPACE 0xC0000000 | 0x017d
-+#define NT_STATUS_TOO_MANY_SIDS 0xC0000000 | 0x017e
-+#define NT_STATUS_LM_CROSS_ENCRYPTION_REQUIRED 0xC0000000 | 0x017f
-+#define NT_STATUS_KEY_HAS_CHILDREN 0xC0000000 | 0x0180
-+#define NT_STATUS_CHILD_MUST_BE_VOLATILE 0xC0000000 | 0x0181
-+#define NT_STATUS_DEVICE_CONFIGURATION_ERROR 0xC0000000 | 0x0182
-+#define NT_STATUS_DRIVER_INTERNAL_ERROR 0xC0000000 | 0x0183
-+#define NT_STATUS_INVALID_DEVICE_STATE 0xC0000000 | 0x0184
-+#define NT_STATUS_IO_DEVICE_ERROR 0xC0000000 | 0x0185
-+#define NT_STATUS_DEVICE_PROTOCOL_ERROR 0xC0000000 | 0x0186
-+#define NT_STATUS_BACKUP_CONTROLLER 0xC0000000 | 0x0187
-+#define NT_STATUS_LOG_FILE_FULL 0xC0000000 | 0x0188
-+#define NT_STATUS_TOO_LATE 0xC0000000 | 0x0189
-+#define NT_STATUS_NO_TRUST_LSA_SECRET 0xC0000000 | 0x018a
-+#define NT_STATUS_NO_TRUST_SAM_ACCOUNT 0xC0000000 | 0x018b
-+#define NT_STATUS_TRUSTED_DOMAIN_FAILURE 0xC0000000 | 0x018c
-+#define NT_STATUS_TRUSTED_RELATIONSHIP_FAILURE 0xC0000000 | 0x018d
-+#define NT_STATUS_EVENTLOG_FILE_CORRUPT 0xC0000000 | 0x018e
-+#define NT_STATUS_EVENTLOG_CANT_START 0xC0000000 | 0x018f
-+#define NT_STATUS_TRUST_FAILURE 0xC0000000 | 0x0190
-+#define NT_STATUS_MUTANT_LIMIT_EXCEEDED 0xC0000000 | 0x0191
-+#define NT_STATUS_NETLOGON_NOT_STARTED 0xC0000000 | 0x0192
-+#define NT_STATUS_ACCOUNT_EXPIRED 0xC0000000 | 0x0193
-+#define NT_STATUS_POSSIBLE_DEADLOCK 0xC0000000 | 0x0194
-+#define NT_STATUS_NETWORK_CREDENTIAL_CONFLICT 0xC0000000 | 0x0195
-+#define NT_STATUS_REMOTE_SESSION_LIMIT 0xC0000000 | 0x0196
-+#define NT_STATUS_EVENTLOG_FILE_CHANGED 0xC0000000 | 0x0197
-+#define NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT 0xC0000000 | 0x0198
-+#define NT_STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT 0xC0000000 | 0x0199
-+#define NT_STATUS_NOLOGON_SERVER_TRUST_ACCOUNT 0xC0000000 | 0x019a
-+#define NT_STATUS_DOMAIN_TRUST_INCONSISTENT 0xC0000000 | 0x019b
-+#define NT_STATUS_FS_DRIVER_REQUIRED 0xC0000000 | 0x019c
-+#define NT_STATUS_NO_USER_SESSION_KEY 0xC0000000 | 0x0202
-+#define NT_STATUS_USER_SESSION_DELETED 0xC0000000 | 0x0203
-+#define NT_STATUS_RESOURCE_LANG_NOT_FOUND 0xC0000000 | 0x0204
-+#define NT_STATUS_INSUFF_SERVER_RESOURCES 0xC0000000 | 0x0205
-+#define NT_STATUS_INVALID_BUFFER_SIZE 0xC0000000 | 0x0206
-+#define NT_STATUS_INVALID_ADDRESS_COMPONENT 0xC0000000 | 0x0207
-+#define NT_STATUS_INVALID_ADDRESS_WILDCARD 0xC0000000 | 0x0208
-+#define NT_STATUS_TOO_MANY_ADDRESSES 0xC0000000 | 0x0209
-+#define NT_STATUS_ADDRESS_ALREADY_EXISTS 0xC0000000 | 0x020a
-+#define NT_STATUS_ADDRESS_CLOSED 0xC0000000 | 0x020b
-+#define NT_STATUS_CONNECTION_DISCONNECTED 0xC0000000 | 0x020c
-+#define NT_STATUS_CONNECTION_RESET 0xC0000000 | 0x020d
-+#define NT_STATUS_TOO_MANY_NODES 0xC0000000 | 0x020e
-+#define NT_STATUS_TRANSACTION_ABORTED 0xC0000000 | 0x020f
-+#define NT_STATUS_TRANSACTION_TIMED_OUT 0xC0000000 | 0x0210
-+#define NT_STATUS_TRANSACTION_NO_RELEASE 0xC0000000 | 0x0211
-+#define NT_STATUS_TRANSACTION_NO_MATCH 0xC0000000 | 0x0212
-+#define NT_STATUS_TRANSACTION_RESPONDED 0xC0000000 | 0x0213
-+#define NT_STATUS_TRANSACTION_INVALID_ID 0xC0000000 | 0x0214
-+#define NT_STATUS_TRANSACTION_INVALID_TYPE 0xC0000000 | 0x0215
-+#define NT_STATUS_NOT_SERVER_SESSION 0xC0000000 | 0x0216
-+#define NT_STATUS_NOT_CLIENT_SESSION 0xC0000000 | 0x0217
-+#define NT_STATUS_CANNOT_LOAD_REGISTRY_FILE 0xC0000000 | 0x0218
-+#define NT_STATUS_DEBUG_ATTACH_FAILED 0xC0000000 | 0x0219
-+#define NT_STATUS_SYSTEM_PROCESS_TERMINATED 0xC0000000 | 0x021a
-+#define NT_STATUS_DATA_NOT_ACCEPTED 0xC0000000 | 0x021b
-+#define NT_STATUS_NO_BROWSER_SERVERS_FOUND 0xC0000000 | 0x021c
-+#define NT_STATUS_VDM_HARD_ERROR 0xC0000000 | 0x021d
-+#define NT_STATUS_DRIVER_CANCEL_TIMEOUT 0xC0000000 | 0x021e
-+#define NT_STATUS_REPLY_MESSAGE_MISMATCH 0xC0000000 | 0x021f
-+#define NT_STATUS_MAPPED_ALIGNMENT 0xC0000000 | 0x0220
-+#define NT_STATUS_IMAGE_CHECKSUM_MISMATCH 0xC0000000 | 0x0221
-+#define NT_STATUS_LOST_WRITEBEHIND_DATA 0xC0000000 | 0x0222
-+#define NT_STATUS_CLIENT_SERVER_PARAMETERS_INVALID 0xC0000000 | 0x0223
-+#define NT_STATUS_PASSWORD_MUST_CHANGE 0xC0000000 | 0x0224
-+#define NT_STATUS_NOT_FOUND 0xC0000000 | 0x0225
-+#define NT_STATUS_NOT_TINY_STREAM 0xC0000000 | 0x0226
-+#define NT_STATUS_RECOVERY_FAILURE 0xC0000000 | 0x0227
-+#define NT_STATUS_STACK_OVERFLOW_READ 0xC0000000 | 0x0228
-+#define NT_STATUS_FAIL_CHECK 0xC0000000 | 0x0229
-+#define NT_STATUS_DUPLICATE_OBJECTID 0xC0000000 | 0x022a
-+#define NT_STATUS_OBJECTID_EXISTS 0xC0000000 | 0x022b
-+#define NT_STATUS_CONVERT_TO_LARGE 0xC0000000 | 0x022c
-+#define NT_STATUS_RETRY 0xC0000000 | 0x022d
-+#define NT_STATUS_FOUND_OUT_OF_SCOPE 0xC0000000 | 0x022e
-+#define NT_STATUS_ALLOCATE_BUCKET 0xC0000000 | 0x022f
-+#define NT_STATUS_PROPSET_NOT_FOUND 0xC0000000 | 0x0230
-+#define NT_STATUS_MARSHALL_OVERFLOW 0xC0000000 | 0x0231
-+#define NT_STATUS_INVALID_VARIANT 0xC0000000 | 0x0232
-+#define NT_STATUS_DOMAIN_CONTROLLER_NOT_FOUND 0xC0000000 | 0x0233
-+#define NT_STATUS_ACCOUNT_LOCKED_OUT 0xC0000000 | 0x0234
-+#define NT_STATUS_HANDLE_NOT_CLOSABLE 0xC0000000 | 0x0235
-+#define NT_STATUS_CONNECTION_REFUSED 0xC0000000 | 0x0236
-+#define NT_STATUS_GRACEFUL_DISCONNECT 0xC0000000 | 0x0237
-+#define NT_STATUS_ADDRESS_ALREADY_ASSOCIATED 0xC0000000 | 0x0238
-+#define NT_STATUS_ADDRESS_NOT_ASSOCIATED 0xC0000000 | 0x0239
-+#define NT_STATUS_CONNECTION_INVALID 0xC0000000 | 0x023a
-+#define NT_STATUS_CONNECTION_ACTIVE 0xC0000000 | 0x023b
-+#define NT_STATUS_NETWORK_UNREACHABLE 0xC0000000 | 0x023c
-+#define NT_STATUS_HOST_UNREACHABLE 0xC0000000 | 0x023d
-+#define NT_STATUS_PROTOCOL_UNREACHABLE 0xC0000000 | 0x023e
-+#define NT_STATUS_PORT_UNREACHABLE 0xC0000000 | 0x023f
-+#define NT_STATUS_REQUEST_ABORTED 0xC0000000 | 0x0240
-+#define NT_STATUS_CONNECTION_ABORTED 0xC0000000 | 0x0241
-+#define NT_STATUS_BAD_COMPRESSION_BUFFER 0xC0000000 | 0x0242
-+#define NT_STATUS_USER_MAPPED_FILE 0xC0000000 | 0x0243
-+#define NT_STATUS_AUDIT_FAILED 0xC0000000 | 0x0244
-+#define NT_STATUS_TIMER_RESOLUTION_NOT_SET 0xC0000000 | 0x0245
-+#define NT_STATUS_CONNECTION_COUNT_LIMIT 0xC0000000 | 0x0246
-+#define NT_STATUS_LOGIN_TIME_RESTRICTION 0xC0000000 | 0x0247
-+#define NT_STATUS_LOGIN_WKSTA_RESTRICTION 0xC0000000 | 0x0248
-+#define NT_STATUS_IMAGE_MP_UP_MISMATCH 0xC0000000 | 0x0249
-+#define NT_STATUS_INSUFFICIENT_LOGON_INFO 0xC0000000 | 0x0250
-+#define NT_STATUS_BAD_DLL_ENTRYPOINT 0xC0000000 | 0x0251
-+#define NT_STATUS_BAD_SERVICE_ENTRYPOINT 0xC0000000 | 0x0252
-+#define NT_STATUS_LPC_REPLY_LOST 0xC0000000 | 0x0253
-+#define NT_STATUS_IP_ADDRESS_CONFLICT1 0xC0000000 | 0x0254
-+#define NT_STATUS_IP_ADDRESS_CONFLICT2 0xC0000000 | 0x0255
-+#define NT_STATUS_REGISTRY_QUOTA_LIMIT 0xC0000000 | 0x0256
-+#define NT_STATUS_PATH_NOT_COVERED 0xC0000000 | 0x0257
-+#define NT_STATUS_NO_CALLBACK_ACTIVE 0xC0000000 | 0x0258
-+#define NT_STATUS_LICENSE_QUOTA_EXCEEDED 0xC0000000 | 0x0259
-+#define NT_STATUS_PWD_TOO_SHORT 0xC0000000 | 0x025a
-+#define NT_STATUS_PWD_TOO_RECENT 0xC0000000 | 0x025b
-+#define NT_STATUS_PWD_HISTORY_CONFLICT 0xC0000000 | 0x025c
-+#define NT_STATUS_PLUGPLAY_NO_DEVICE 0xC0000000 | 0x025e
-+#define NT_STATUS_UNSUPPORTED_COMPRESSION 0xC0000000 | 0x025f
-+#define NT_STATUS_INVALID_HW_PROFILE 0xC0000000 | 0x0260
-+#define NT_STATUS_INVALID_PLUGPLAY_DEVICE_PATH 0xC0000000 | 0x0261
-+#define NT_STATUS_DRIVER_ORDINAL_NOT_FOUND 0xC0000000 | 0x0262
-+#define NT_STATUS_DRIVER_ENTRYPOINT_NOT_FOUND 0xC0000000 | 0x0263
-+#define NT_STATUS_RESOURCE_NOT_OWNED 0xC0000000 | 0x0264
-+#define NT_STATUS_TOO_MANY_LINKS 0xC0000000 | 0x0265
-+#define NT_STATUS_QUOTA_LIST_INCONSISTENT 0xC0000000 | 0x0266
-+#define NT_STATUS_FILE_IS_OFFLINE 0xC0000000 | 0x0267
-+#define NT_STATUS_NO_SUCH_JOB 0xC0000000 | 0xEDE	/* scheduler */
-+
-+#endif				/* _NTERR_H */
-diff -urN linux-2.4.29.old/fs/cifs/ntlmssp.h linux-2.4.29/fs/cifs/ntlmssp.h
---- linux-2.4.29.old/fs/cifs/ntlmssp.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/ntlmssp.h	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,101 @@
-+/*
-+ *   fs/cifs/ntlmssp.h
-+ *
-+ *   Copyright (c) International Business Machines  Corp., 2002
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 
-+ */
-+
-+#pragma pack(1)
-+
-+#define NTLMSSP_SIGNATURE "NTLMSSP"
-+/* Message Types */
-+#define NtLmNegotiate     1
-+#define NtLmChallenge     2
-+#define NtLmAuthenticate  3
-+#define UnknownMessage    8
-+
-+/* Negotiate Flags */
-+#define NTLMSSP_NEGOTIATE_UNICODE       0x01	// Text strings are in unicode
-+#define NTLMSSP_NEGOTIATE_OEM           0x02	// Text strings are in OEM
-+#define NTLMSSP_REQUEST_TARGET          0x04	// Server return its auth realm
-+#define NTLMSSP_NEGOTIATE_SIGN        0x0010	// Request signature capability
-+#define NTLMSSP_NEGOTIATE_SEAL        0x0020	// Request confidentiality
-+#define NTLMSSP_NEGOTIATE_DGRAM       0x0040
-+#define NTLMSSP_NEGOTIATE_LM_KEY      0x0080	// Use LM session key for sign/seal
-+#define NTLMSSP_NEGOTIATE_NTLM        0x0200	// NTLM authentication
-+#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000
-+#define NTLMSSP_NEGOTIATE_WORKSTATION_SUPPLIED 0x2000
-+#define NTLMSSP_NEGOTIATE_LOCAL_CALL  0x4000	// client/server on same machine
-+#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN 0x8000	// Sign for all security levels
-+#define NTLMSSP_TARGET_TYPE_DOMAIN   0x10000
-+#define NTLMSSP_TARGET_TYPE_SERVER   0x20000
-+#define NTLMSSP_TARGET_TYPE_SHARE    0x40000
-+#define NTLMSSP_NEGOTIATE_NTLMV2     0x80000
-+#define NTLMSSP_REQUEST_INIT_RESP   0x100000
-+#define NTLMSSP_REQUEST_ACCEPT_RESP 0x200000
-+#define NTLMSSP_REQUEST_NOT_NT_KEY  0x400000
-+#define NTLMSSP_NEGOTIATE_TARGET_INFO 0x800000
-+#define NTLMSSP_NEGOTIATE_128     0x20000000
-+#define NTLMSSP_NEGOTIATE_KEY_XCH 0x40000000
-+#define NTLMSSP_NEGOTIATE_56      0x80000000
-+
-+/* Although typedefs are not commonly used for structure definitions */
-+/* in the Linux kernel, in this particular case they are useful      */
-+/* to more closely match the standards document for NTLMSSP from     */
-+/* OpenGroup and to make the code more closely match the standard in */
-+/* appearance */
-+
-+typedef struct _SECURITY_BUFFER {
-+	__u16 Length;
-+	__u16 MaximumLength;
-+	__u32 Buffer;		/* offset to buffer */
-+} SECURITY_BUFFER;
-+
-+typedef struct _NEGOTIATE_MESSAGE {
-+	__u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
-+	__u32 MessageType;     /* 1 */
-+	__u32 NegotiateFlags;
-+	SECURITY_BUFFER DomainName;	/* RFC 1001 style and ASCII */
-+	SECURITY_BUFFER WorkstationName;	/* RFC 1001 and ASCII */
-+	char DomainString[0];
-+	/* followed by WorkstationString */
-+} NEGOTIATE_MESSAGE, *PNEGOTIATE_MESSAGE;
-+
-+typedef struct _CHALLENGE_MESSAGE {
-+	__u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
-+	__u32 MessageType;   /* 2 */
-+	SECURITY_BUFFER TargetName;
-+	__u32 NegotiateFlags;
-+	__u8 Challenge[CIFS_CRYPTO_KEY_SIZE];
-+	__u8 Reserved[8];
-+	SECURITY_BUFFER TargetInfoArray;
-+} CHALLENGE_MESSAGE, *PCHALLENGE_MESSAGE;
-+
-+typedef struct _AUTHENTICATE_MESSAGE {
-+	__u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
-+	__u32 MessageType;  /* 3 */
-+	SECURITY_BUFFER LmChallengeResponse;
-+	SECURITY_BUFFER NtChallengeResponse;
-+	SECURITY_BUFFER DomainName;
-+	SECURITY_BUFFER UserName;
-+	SECURITY_BUFFER WorkstationName;
-+	SECURITY_BUFFER SessionKey;
-+	__u32 NegotiateFlags;
-+	char UserString[0];
-+} AUTHENTICATE_MESSAGE, *PAUTHENTICATE_MESSAGE;
-+
-+#pragma pack()			/* resume default structure packing */
-diff -urN linux-2.4.29.old/fs/cifs/README linux-2.4.29/fs/cifs/README
---- linux-2.4.29.old/fs/cifs/README	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/README	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,356 @@
-+The CIFS VFS support for Linux supports many advanced network filesystem 
-+features such as heirarchical dfs like namespace, hardlinks, locking and more.  
-+It was designed to comply with the SNIA CIFS Technical Reference (which 
-+supersedes the 1992 X/Open SMB Standard) as well as to perform best practice 
-+practical interoperability with Windows 2000, Windows XP, Samba and equivalent 
-+servers.  
-+
-+For questions or bug reports please contact:
-+    sfrench@samba.org (sfrench@us.ibm.com) 
-+
-+Build instructions:
-+==================
-+For Linux 2.4:
-+1) Get the kernel source (e.g.from http://www.kernel.org)
-+and download the cifs vfs source (see the project page
-+at http://us1.samba.org/samba/Linux_CIFS_client.html)
-+and change directory into the top of the kernel directory
-+then patch the kernel (e.g. "patch -p1 < cifs_24.patch") 
-+to add the cifs vfs to your kernel configure options if
-+it has not already been added (e.g. current SuSE and UL
-+users do not need to apply the cifs_24.patch since the cifs vfs is
-+already in the kernel configure menu) and then
-+mkdir linux/fs/cifs and then copy the current cifs vfs files from
-+the cifs download to your kernel build directory e.g.
-+
-+	cp <cifs_download_dir>/fs/cifs/* to <kernel_download_dir>/fs/cifs
-+	
-+2) make menuconfig (or make xconfig)
-+3) select cifs from within the network filesystem choices
-+4) save and exit
-+5) make dep
-+6) make modules (or "make" if CIFS VFS not to be built as a module)
-+
-+For Linux 2.5:
-+1) Download the kernel (e.g. from http://www.kernel.org or from bitkeeper
-+at bk://linux.bkbits.net/linux-2.5) and change directory into the top
-+of the kernel directory tree (e.g. /usr/src/linux-2.5.73)
-+2) make menuconfig (or make xconfig)
-+3) select cifs from within the network filesystem choices
-+4) save and exit
-+5) make
-+
-+
-+Installation instructions:
-+=========================
-+If you have built the CIFS vfs as module (successfully) simply
-+type "make modules_install" (or if you prefer, manually copy the file to
-+the modules directory e.g. /lib/modules/2.4.10-4GB/kernel/fs/cifs/cifs.o).
-+
-+If you have built the CIFS vfs into the kernel itself, follow the instructions
-+for your distribution on how to install a new kernel (usually you
-+would simply type "make install").
-+
-+If you do not have the utility mount.cifs (in the Samba 3.0 source tree and on 
-+the CIFS VFS web site) copy it to the same directory in which mount.smbfs and 
-+similar files reside (usually /sbin).  Although the helper software is not  
-+required, mount.cifs is recommended.  Eventually the Samba 3.0 utility program 
-+"net" may also be helpful since it may someday provide easier mount syntax for
-+users who are used to Windows e.g.  net use <mount point> <UNC name or cifs URL>  
-+Note that running the Winbind pam/nss module (logon service) on all of your
-+Linux clients is useful in mapping Uids and Gids consistently across the
-+domain to the proper network user.  The mount.cifs mount helper can be
-+trivially built from Samba 3.0 or later source e.g. by executing:
-+
-+	gcc samba/source/client/mount.cifs.c -o mount.cifs
-+
-+Note that when the mount.cifs utility is run suid (allowing user mounts), 
-+in order to reduce risks, the "nosuid" mount flag is passed in on mount to
-+disallow execution of an suid program mounted on the remote target.
-+When mount is executed as root, nosuid is not passed in by default,
-+and execution of suid programs on the remote target would be enabled
-+by default. This can be changed, as with nfs and other filesystems, 
-+by simply specifying "nosuid" among the mount options. For user mounts 
-+though to be able to pass the suid flag to mount requires rebuilding 
-+mount.cifs with the following flag: 
-+ 
-+        gcc samba/source/client/mount.cifs.c -DCIFS_ALLOW_USR_SUID -o mount.cifs
-+
-+There is a corresponding manual page for cifs mounting in the Samba 3.0 and
-+later source tree in docs/manpages/mount.cifs.8 
-+
-+Samba Considerations 
-+==================== 
-+To get the maximum benefit from the CIFS VFS, we recommend using a server that 
-+supports the SNIA CIFS Unix Extensions standard (e.g.  Samba 2.2.5 or later or 
-+Samba 3.0) but the CIFS vfs works fine with a wide variety of CIFS servers.  
-+Note that uid, gid and file permissions will display default values if you do 
-+not have a server that supports the Unix extensions for CIFS (such as Samba 
-+2.2.5 or later).  To enable the Unix CIFS Extensions in the Samba server, add 
-+the line: 
-+
-+	unix extensions = yes
-+	
-+to your smb.conf file on the server.  Note that the following smb.conf settings 
-+are also useful (on the Samba server) when the majority of clients are Unix or 
-+Linux: 
-+
-+	case sensitive = yes
-+	delete readonly = yes 
-+	ea support = yes
-+
-+Note that ea support is required for supporting Linux xattrs. 
-+Some administrators also change the "map archive" and the "create mask" 
-+parameters from their default values.  Creating special devices (mknod) 
-+remotely may require specifying a mkdev function to Samba if you are not using 
-+Samba 3.0.5 or later.  For more information on these see the manual pages
-+("man smb.conf") on the Samba server system.  Note that the cifs vfs,
-+unlike the smbfs vfs, does not read the smb.conf on the client system 
-+(the few optional settings are passed in on mount via -o parameters instead).  
-+Note that Samba 2.2.7 or later includes a fix that allows the CIFS VFS to delete
-+open files (required for strict POSIX compliance).  Windows Servers already 
-+supported this feature. Samba server does not allow symlinks that refer to files
-+outside of the share, so in Samba versions prior to 3.0.5, most symlinks to
-+files with absolute paths (ie beginning with slash) such as:
-+	 ln -s /mnt/foo bar
-+would be forbidden. Samba 3.0.5 server or later includes the ability to create 
-+such symlinks safely by converting unsafe symlinks (ie symlinks to server 
-+files that are outside of the share) to a samba specific format on the server
-+that is ignored by local server applications and non-cifs clients and that will
-+not be traversed by the Samba server).  This is opaque to the Linux client
-+application using the cifs vfs. Absolute symlinks will work to Samba 3.0.5 or
-+later, but only for remote clients using the CIFS Unix extensions, and will
-+be invisbile to Windows clients and typically will not affect local
-+applications running on the same server as Samba.  
-+
-+Use instructions:
-+================
-+Once the CIFS VFS support is built into the kernel or installed as a module 
-+(cifs.o), you can use mount syntax like the following to access Samba or Windows 
-+servers: 
-+
-+  mount -t cifs //9.53.216.11/e$ /mnt -o user=myname,pass=mypassword
-+
-+Before -o the option -v may be specified to make the mount.cifs
-+mount helper display the mount steps more verbosely.  
-+After -o the following commonly used cifs vfs specific options
-+are supported:
-+
-+  user=<username>
-+  pass=<password>
-+  domain=<domain name>
-+  
-+Other cifs mount options are described below.  Use of TCP names (in addition to
-+ip addresses) is available if the mount helper (mount.cifs) is installed. If
-+you do not trust the server to which are mounted, or if you do not have
-+cifs signing enabled (and the physical network is insecure), consider use
-+of the standard mount options "noexec" and "nosuid" to reduce the risk of 
-+running an altered binary on your local system (downloaded from a hostile server
-+or altered by a hostile router).
-+
-+When using the mount helper mount.cifs, passwords may be specified via alternate
-+mechanisms, instead of specifying it after -o using the normal "pass=" syntax
-+on the command line:
-+1) By including it in a credential file. Specify credentials=filename as one
-+of the mount options. Credential files contain two lines
-+        username=someuser
-+        password=your_password
-+2) By specifying the password in the PASSWD environment variable (similarly
-+the user name can be taken from the USER environment variable).
-+3) By specifying the password in a file by name via PASSWD_FILE
-+4) By specifying the password in a file by file descriptor via PASSWD_FD
-+
-+If no password is provided, mount.cifs will prompt for password entry
-+
-+Restrictions
-+============
-+Servers must support the NTLM SMB dialect (which is the most recent, supported 
-+by Samba and Windows NT version 4, 2000 and XP and many other SMB/CIFS servers) 
-+Servers must support either "pure-TCP" (port 445 TCP/IP CIFS connections) or RFC 
-+1001/1002 support for "Netbios-Over-TCP/IP." Neither of these is likely to be a 
-+problem as most servers support this.  IPv6 support is planned for the future.  
-+
-+CIFS VFS Mount Options
-+======================
-+A partial list of the supported mount options follows:
-+  user		The user name to use when trying to establish
-+		the CIFS session.
-+  password	The user password.  If the mount helper is
-+		installed, the user will be prompted for password
-+		if it is not supplied.
-+  ip		The ip address of the target server
-+  unc		The target server Universal Network Name (export) to 
-+		mount.	
-+  domain	Set the SMB/CIFS workgroup name prepended to the
-+		username during CIFS session establishment
-+  uid		If CIFS Unix extensions are not supported by the server
-+		this overrides the default uid for inodes. For mounts to
-+		servers which do support the CIFS Unix extensions, such
-+		as a properly configured Samba server, the server provides
-+		the uid, gid and mode.  For servers which do not support
-+		the Unix extensions, the default uid (and gid) returned on
-+		lookup of existing files is the uid (gid) of the person
-+		who executed the mount (root, except when mount.cifs
-+		is configured setuid for user mounts) unless the "uid=" 
-+		(gid) mount option is specified.  For the uid (gid) of newly
-+		created files and directories, ie files created since 
-+		the last mount of the server share, the expected uid 
-+		(gid) is cached as as long as the inode remains in 
-+		memory on the client.   Also note that permission
-+		checks (authorization checks) on accesses to a file occur
-+		at the server, but there are cases in which an administrator
-+		may want to restrict at the client as well.  For those
-+		servers which do not report a uid/gid owner
-+		(such as Windows), permissions can also be checked at the
-+		client, and a crude form of client side permission checking 
-+		can be enabled by specifying file_mode and dir_mode on 
-+		the client
-+  gid		If CIFS Unix extensions are not supported by the server
-+		this overrides the default gid for inodes.
-+  file_mode     If CIFS Unix extensions are not supported by the server
-+		this overrides the default mode for file inodes.
-+  dir_mode      If CIFS Unix extensions are not supported by the server 
-+		this overrides the default mode for directory inodes.
-+  port		attempt to contact the server on this tcp port, before
-+		trying the usual ports (port 445, then 139).
-+  iocharset     Codepage used to convert local path names to and from
-+		Unicode. Unicode is used by default for network path
-+		names if the server supports it.  If iocharset is
-+		not specified then the nls_default specified
-+		during the local client kernel build will be used.
-+		If server does not support Unicode, this parameter is
-+		unused.
-+  rsize		default read size
-+  wsize		default write size
-+  rw		mount the network share read-write (note that the
-+		server may still consider the share read-only)
-+  ro		mount network share read-only
-+  version	used to distinguish different versions of the
-+		mount helper utility (not typically needed)
-+  sep		if first mount option (after the -o), overrides
-+		the comma as the separator between the mount
-+		parms. e.g.
-+			-o user=myname,password=mypassword,domain=mydom
-+		could be passed instead with period as the separator by
-+			-o sep=.user=myname.password=mypassword.domain=mydom
-+		this might be useful when comma is contained within username
-+		or password or domain. This option is less important
-+		when the cifs mount helper cifs.mount (version 1.1 or later)
-+		is used.
-+  nosuid        Do not allow remote executables with the suid bit 
-+		program to be executed.  This is only meaningful for mounts
-+		to servers such as Samba which support the CIFS Unix Extensions.
-+		If you do not trust the servers in your network (your mount
-+		targets) it is recommended that you specify this option for
-+		greater security.
-+  suid          Allow remote files on this mountpoint with suid enabled to 
-+		be executed (default for mounts when executed as root,
-+		nosuid is default for user mounts).
-+  credentials   Although ignored by the cifs kernel component, it is used by 
-+		the mount helper, mount.cifs. When mount.cifs is installed it
-+		opens and reads the credential file specified in order  
-+		to obtain the userid and password arguments which are passed to
-+		the cifs vfs.
-+  guest         Although ignored by the kernel component, the mount.cifs
-+		mount helper will not prompt the user for a password
-+		if guest is specified on the mount options.  If no
-+		password is specified a null password will be used.
-+
-+The mount.cifs mount helper also accepts a few mount options before -o
-+including:
-+
-+	-S      take password from stdin (equivalent to setting the environment
-+		variable "PASSWD_FD=0"
-+	-V      print mount.cifs version
-+	-?      display simple usage information
-+
-+With recent 2.6 kernel versions of modutils, the version of the cifs kernel
-+module can be displayed via modinfo.
-+
-+Misc /proc/fs/cifs Flags and Debug Info
-+=======================================
-+Informational pseudo-files:
-+DebugData		Displays information about active CIFS sessions
-+			and shares.
-+Stats			Lists summary resource usage information as well as per
-+			share statistics, if CONFIG_CIFS_STATS in enabled
-+			in the kernel configuration.
-+
-+Configuration pseudo-files:
-+MultiuserMount		If set to one, more than one CIFS session to 
-+			the same server ip address can be established
-+			if more than one uid accesses the same mount
-+			point and if the uids user/password mapping
-+			information is available. (default is 0)
-+PacketSigningEnabled	If set to one, cifs packet signing is enabled
-+			and will be used if the server requires 
-+			it.  If set to two, cifs packet signing is
-+			required even if the server considers packet
-+			signing optional. (default 1)
-+cifsFYI			If set to one, additional debug information is
-+			logged to the system error log. (default 0)
-+ExtendedSecurity	If set to one, SPNEGO session establishment
-+			is allowed which enables more advanced 
-+			secure CIFS session establishment (default 0)
-+NTLMV2Enabled		If set to one, more secure password hashes
-+			are used when the server supports them and
-+			when kerberos is not negotiated (default 0)
-+traceSMB		If set to one, debug information is logged to the
-+			system error log with the start of smb requests
-+			and responses (default 0)
-+LookupCacheEnable	If set to one, inode information is kept cached
-+			for one second improving performance of lookups
-+			(default 1)
-+OplockEnabled		If set to one, safe distributed caching enabled.
-+			(default 1)
-+LinuxExtensionsEnabled	If set to one then the client will attempt to
-+			use the CIFS "UNIX" extensions which are optional
-+			protocol enhancements that allow CIFS servers
-+			to return accurate UID/GID information as well
-+			as support symbolic links. If you use servers
-+			such as Samba that support the CIFS Unix
-+			extensions but do not want to use symbolic link
-+			support and want to map the uid and gid fields 
-+			to values supplied at mount (rather than the 
-+			actual values, then set this to zero. (default 1)
-+
-+These experimental features and tracing can be enabled by changing flags in 
-+/proc/fs/cifs (after the cifs module has been installed or built into the 
-+kernel, e.g.  insmod cifs).  To enable a feature set it to 1 e.g.  to enable 
-+tracing to the kernel message log type: 
-+
-+	echo 1 > /proc/fs/cifs/cifsFYI
-+	
-+and for more extensive tracing including the start of smb requests and responses
-+
-+	echo 1 > /proc/fs/cifs/traceSMB
-+
-+Three other experimental features are under development and to test 
-+require enabling an ifdef (e.g. by  adding "#define CIFS_FCNTL" in cifsglob.h)
-+
-+	CONFIG_CIFS_QUOTA
-+
-+	CONFIG_CIFS_XATTR
-+
-+	CONFIG_CIFS_FCNTL  (fcntl needed for support of directory change 
-+			    notification and perhaps later for file leases)
-+
-+Per share (per client mount) statistics are available in /proc/fs/cifs/DebugData
-+if the kernel was configured with cifs statistics enabled.  The statistics
-+represent the number of successful (ie non-zero return code from the server) 
-+SMB responses to some of the more common commands (open, delete, mkdir etc.).
-+Also recorded is the total bytes read and bytes written to the server for
-+that share.  Note that due to client caching effects this can be less than the
-+number of bytes read and written by the application running on the client.
-+The statistics for the number of total SMBs and oplock breaks are different in
-+that they represent all for that share, not just those for which the server
-+returned success.
-+	
-+Also note that "cat /proc/fs/cifs/DebugData" will display information about 
-+the active sessions and the shares that are mounted.  Note: NTLMv2 enablement 
-+will not work since they its implementation is not quite complete yet.
-+Do not alter these configuration values unless you are doing specific testing.  
-+Enabling extended security works to Windows 2000 Workstations and XP but not to 
-+Windows 2000 server or Samba since it does not usually send "raw NTLMSSP" 
-+(instead it sends NTLMSSP encapsulated in SPNEGO/GSSAPI, which support is not 
-+complete in the CIFS VFS yet).  
-diff -urN linux-2.4.29.old/fs/cifs/rfc1002pdu.h linux-2.4.29/fs/cifs/rfc1002pdu.h
---- linux-2.4.29.old/fs/cifs/rfc1002pdu.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/rfc1002pdu.h	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,79 @@
-+/*
-+ *   fs/cifs/rfc1002pdu.h
-+ *
-+ *   Protocol Data Unit definitions for RFC 1001/1002 support
-+ *
-+ *   Copyright (c) International Business Machines  Corp., 2004
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 
-+ */
-+
-+#pragma pack(1)
-+
-+/* NB: unlike smb/cifs packets, the RFC1002 structures are big endian */
-+
-+	/* RFC 1002 session packet types */
-+#define RFC1002_SESSION_MESASAGE 0x00
-+#define RFC1002_SESSION_REQUEST  0x81
-+#define RFC1002_POSITIVE_SESSION_RESPONSE 0x82
-+#define RFC1002_NEGATIVE_SESSION_RESPONSE 0x83
-+#define RFC1002_RETARGET_SESSION_RESPONSE 0x83
-+#define RFC1002_SESSION_KEEP_ALIVE 0x85
-+
-+	/* RFC 1002 flags (only one defined */
-+#define RFC1002_LENGTH_EXTEND 0x80 /* high order bit of length (ie +64K) */
-+
-+struct rfc1002_session_packet {
-+	__u8	type;
-+	__u8	flags;
-+	__u16	length;
-+	union {
-+		struct {
-+			__u8 called_len;
-+			__u8 called_name[32];
-+			__u8 scope1; /* null */
-+			__u8 calling_len;
-+			__u8 calling_name[32];
-+			__u8 scope2; /* null */
-+		} session_req;
-+		struct {
-+			__u32 retarget_ip_addr;
-+			__u16 port;
-+		} retarget_resp;
-+		__u8 neg_ses_resp_error_code;
-+		/* POSITIVE_SESSION_RESPONSE packet does not include trailer.
-+		SESSION_KEEP_ALIVE packet also does not include a trailer.
-+		Trailer for the SESSION_MESSAGE packet is SMB/CIFS header */
-+	} trailer;
-+};
-+
-+/* Negative Session Response error codes */
-+#define RFC1002_NOT_LISTENING_CALLED  0x80 /* not listening on called name */
-+#define RFC1002_NOT_LISTENING_CALLING 0x81 /* not listening on calling name */
-+#define RFC1002_NOT_PRESENT           0x82 /* called name not present */
-+#define RFC1002_INSUFFICIENT_RESOURCE 0x83
-+#define RFC1002_UNSPECIFIED_ERROR     0x8F
-+
-+/* RFC 1002 Datagram service packets are not defined here as they
-+are not needed for the network filesystem client unless we plan on
-+implementing broadcast resolution of the server ip address (from
-+server netbios name). Currently server names are resolved only via DNS
-+(tcp name) or ip address or an /etc/hosts equivalent mapping to ip address.*/
-+
-+#define DEFAULT_CIFS_CALLED_NAME  "*SMBSERVER      "
-+
-+#pragma pack()		/* resume default structure packing */
-+                                                             
-diff -urN linux-2.4.29.old/fs/cifs/smbdes.c linux-2.4.29/fs/cifs/smbdes.c
---- linux-2.4.29.old/fs/cifs/smbdes.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/smbdes.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,408 @@
-+/* 
-+   Unix SMB/Netbios implementation.
-+   Version 1.9.
-+
-+   a partial implementation of DES designed for use in the 
-+   SMB authentication protocol
-+
-+   Copyright (C) Andrew Tridgell 1998
-+   Modified by Steve French (sfrench@us.ibm.com) 2002,2004
-+   
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+   
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+   
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+*/
-+
-+/* NOTES: 
-+
-+   This code makes no attempt to be fast! In fact, it is a very
-+   slow implementation 
-+
-+   This code is NOT a complete DES implementation. It implements only
-+   the minimum necessary for SMB authentication, as used by all SMB
-+   products (including every copy of Microsoft Windows95 ever sold)
-+
-+   In particular, it can only do a unchained forward DES pass. This
-+   means it is not possible to use this code for encryption/decryption
-+   of data, instead it is only useful as a "hash" algorithm.
-+
-+   There is no entry point into this code that allows normal DES operation.
-+
-+   I believe this means that this code does not come under ITAR
-+   regulations but this is NOT a legal opinion. If you are concerned
-+   about the applicability of ITAR regulations to this code then you
-+   should confirm it for yourself (and maybe let me know if you come
-+   up with a different answer to the one above)
-+*/
-+#include <linux/slab.h>
-+#define uchar unsigned char
-+
-+static uchar perm1[56] = { 57, 49, 41, 33, 25, 17, 9,
-+	1, 58, 50, 42, 34, 26, 18,
-+	10, 2, 59, 51, 43, 35, 27,
-+	19, 11, 3, 60, 52, 44, 36,
-+	63, 55, 47, 39, 31, 23, 15,
-+	7, 62, 54, 46, 38, 30, 22,
-+	14, 6, 61, 53, 45, 37, 29,
-+	21, 13, 5, 28, 20, 12, 4
-+};
-+
-+static uchar perm2[48] = { 14, 17, 11, 24, 1, 5,
-+	3, 28, 15, 6, 21, 10,
-+	23, 19, 12, 4, 26, 8,
-+	16, 7, 27, 20, 13, 2,
-+	41, 52, 31, 37, 47, 55,
-+	30, 40, 51, 45, 33, 48,
-+	44, 49, 39, 56, 34, 53,
-+	46, 42, 50, 36, 29, 32
-+};
-+
-+static uchar perm3[64] = { 58, 50, 42, 34, 26, 18, 10, 2,
-+	60, 52, 44, 36, 28, 20, 12, 4,
-+	62, 54, 46, 38, 30, 22, 14, 6,
-+	64, 56, 48, 40, 32, 24, 16, 8,
-+	57, 49, 41, 33, 25, 17, 9, 1,
-+	59, 51, 43, 35, 27, 19, 11, 3,
-+	61, 53, 45, 37, 29, 21, 13, 5,
-+	63, 55, 47, 39, 31, 23, 15, 7
-+};
-+
-+static uchar perm4[48] = { 32, 1, 2, 3, 4, 5,
-+	4, 5, 6, 7, 8, 9,
-+	8, 9, 10, 11, 12, 13,
-+	12, 13, 14, 15, 16, 17,
-+	16, 17, 18, 19, 20, 21,
-+	20, 21, 22, 23, 24, 25,
-+	24, 25, 26, 27, 28, 29,
-+	28, 29, 30, 31, 32, 1
-+};
-+
-+static uchar perm5[32] = { 16, 7, 20, 21,
-+	29, 12, 28, 17,
-+	1, 15, 23, 26,
-+	5, 18, 31, 10,
-+	2, 8, 24, 14,
-+	32, 27, 3, 9,
-+	19, 13, 30, 6,
-+	22, 11, 4, 25
-+};
-+
-+static uchar perm6[64] = { 40, 8, 48, 16, 56, 24, 64, 32,
-+	39, 7, 47, 15, 55, 23, 63, 31,
-+	38, 6, 46, 14, 54, 22, 62, 30,
-+	37, 5, 45, 13, 53, 21, 61, 29,
-+	36, 4, 44, 12, 52, 20, 60, 28,
-+	35, 3, 43, 11, 51, 19, 59, 27,
-+	34, 2, 42, 10, 50, 18, 58, 26,
-+	33, 1, 41, 9, 49, 17, 57, 25
-+};
-+
-+static uchar sc[16] = { 1, 1, 2, 2, 2, 2, 2, 2, 1, 2, 2, 2, 2, 2, 2, 1 };
-+
-+static uchar sbox[8][4][16] = {
-+	{{14, 4, 13, 1, 2, 15, 11, 8, 3, 10, 6, 12, 5, 9, 0, 7},
-+	 {0, 15, 7, 4, 14, 2, 13, 1, 10, 6, 12, 11, 9, 5, 3, 8},
-+	 {4, 1, 14, 8, 13, 6, 2, 11, 15, 12, 9, 7, 3, 10, 5, 0},
-+	 {15, 12, 8, 2, 4, 9, 1, 7, 5, 11, 3, 14, 10, 0, 6, 13}},
-+
-+	{{15, 1, 8, 14, 6, 11, 3, 4, 9, 7, 2, 13, 12, 0, 5, 10},
-+	 {3, 13, 4, 7, 15, 2, 8, 14, 12, 0, 1, 10, 6, 9, 11, 5},
-+	 {0, 14, 7, 11, 10, 4, 13, 1, 5, 8, 12, 6, 9, 3, 2, 15},
-+	 {13, 8, 10, 1, 3, 15, 4, 2, 11, 6, 7, 12, 0, 5, 14, 9}},
-+
-+	{{10, 0, 9, 14, 6, 3, 15, 5, 1, 13, 12, 7, 11, 4, 2, 8},
-+	 {13, 7, 0, 9, 3, 4, 6, 10, 2, 8, 5, 14, 12, 11, 15, 1},
-+	 {13, 6, 4, 9, 8, 15, 3, 0, 11, 1, 2, 12, 5, 10, 14, 7},
-+	 {1, 10, 13, 0, 6, 9, 8, 7, 4, 15, 14, 3, 11, 5, 2, 12}},
-+
-+	{{7, 13, 14, 3, 0, 6, 9, 10, 1, 2, 8, 5, 11, 12, 4, 15},
-+	 {13, 8, 11, 5, 6, 15, 0, 3, 4, 7, 2, 12, 1, 10, 14, 9},
-+	 {10, 6, 9, 0, 12, 11, 7, 13, 15, 1, 3, 14, 5, 2, 8, 4},
-+	 {3, 15, 0, 6, 10, 1, 13, 8, 9, 4, 5, 11, 12, 7, 2, 14}},
-+
-+	{{2, 12, 4, 1, 7, 10, 11, 6, 8, 5, 3, 15, 13, 0, 14, 9},
-+	 {14, 11, 2, 12, 4, 7, 13, 1, 5, 0, 15, 10, 3, 9, 8, 6},
-+	 {4, 2, 1, 11, 10, 13, 7, 8, 15, 9, 12, 5, 6, 3, 0, 14},
-+	 {11, 8, 12, 7, 1, 14, 2, 13, 6, 15, 0, 9, 10, 4, 5, 3}},
-+
-+	{{12, 1, 10, 15, 9, 2, 6, 8, 0, 13, 3, 4, 14, 7, 5, 11},
-+	 {10, 15, 4, 2, 7, 12, 9, 5, 6, 1, 13, 14, 0, 11, 3, 8},
-+	 {9, 14, 15, 5, 2, 8, 12, 3, 7, 0, 4, 10, 1, 13, 11, 6},
-+	 {4, 3, 2, 12, 9, 5, 15, 10, 11, 14, 1, 7, 6, 0, 8, 13}},
-+
-+	{{4, 11, 2, 14, 15, 0, 8, 13, 3, 12, 9, 7, 5, 10, 6, 1},
-+	 {13, 0, 11, 7, 4, 9, 1, 10, 14, 3, 5, 12, 2, 15, 8, 6},
-+	 {1, 4, 11, 13, 12, 3, 7, 14, 10, 15, 6, 8, 0, 5, 9, 2},
-+	 {6, 11, 13, 8, 1, 4, 10, 7, 9, 5, 0, 15, 14, 2, 3, 12}},
-+
-+	{{13, 2, 8, 4, 6, 15, 11, 1, 10, 9, 3, 14, 5, 0, 12, 7},
-+	 {1, 15, 13, 8, 10, 3, 7, 4, 12, 5, 6, 11, 0, 14, 9, 2},
-+	 {7, 11, 4, 1, 9, 12, 14, 2, 0, 6, 10, 13, 15, 3, 5, 8},
-+	 {2, 1, 14, 7, 4, 10, 8, 13, 15, 12, 9, 0, 3, 5, 6, 11}}
-+};
-+
-+static void
-+permute(char *out, char *in, uchar * p, int n)
-+{
-+	int i;
-+	for (i = 0; i < n; i++)
-+		out[i] = in[p[i] - 1];
-+}
-+
-+static void
-+lshift(char *d, int count, int n)
-+{
-+	char out[64];
-+	int i;
-+	for (i = 0; i < n; i++)
-+		out[i] = d[(i + count) % n];
-+	for (i = 0; i < n; i++)
-+		d[i] = out[i];
-+}
-+
-+static void
-+concat(char *out, char *in1, char *in2, int l1, int l2)
-+{
-+	while (l1--)
-+		*out++ = *in1++;
-+	while (l2--)
-+		*out++ = *in2++;
-+}
-+
-+static void
-+xor(char *out, char *in1, char *in2, int n)
-+{
-+	int i;
-+	for (i = 0; i < n; i++)
-+		out[i] = in1[i] ^ in2[i];
-+}
-+
-+static void
-+dohash(char *out, char *in, char *key, int forw)
-+{
-+	int i, j, k;
-+	char *pk1;
-+	char c[28];
-+	char d[28];
-+	char *cd;
-+	char ki[16][48];
-+	char *pd1;
-+	char l[32], r[32];
-+	char *rl;
-+
-+	/* Have to reduce stack usage */
-+	pk1 = kmalloc(56+56+64+64,GFP_KERNEL);
-+	if(pk1 == NULL)
-+		return;
-+
-+	cd = pk1 + 56;
-+	pd1= cd  + 56;
-+	rl = pd1 + 64;
-+
-+	permute(pk1, key, perm1, 56);
-+
-+	for (i = 0; i < 28; i++)
-+		c[i] = pk1[i];
-+	for (i = 0; i < 28; i++)
-+		d[i] = pk1[i + 28];
-+
-+	for (i = 0; i < 16; i++) {
-+		lshift(c, sc[i], 28);
-+		lshift(d, sc[i], 28);
-+
-+		concat(cd, c, d, 28, 28);
-+		permute(ki[i], cd, perm2, 48);
-+	}
-+
-+	permute(pd1, in, perm3, 64);
-+
-+	for (j = 0; j < 32; j++) {
-+		l[j] = pd1[j];
-+		r[j] = pd1[j + 32];
-+	}
-+
-+	for (i = 0; i < 16; i++) {
-+		char *er;  /* er[48]  */
-+		char *erk; /* erk[48] */
-+		char b[8][6];
-+		char *cb;  /* cb[32]  */
-+		char *pcb; /* pcb[32] */
-+		char *r2;  /* r2[32]  */
-+
-+		er = kmalloc(48+48+32+32+32, GFP_KERNEL);
-+		if(er == NULL) {
-+			kfree(pk1);
-+			return;
-+		}
-+		erk = er+48;
-+		cb  = erk+48;
-+		pcb = cb+32;
-+		r2  = pcb+32;
-+
-+		permute(er, r, perm4, 48);
-+
-+		xor(erk, er, ki[forw ? i : 15 - i], 48);
-+
-+		for (j = 0; j < 8; j++)
-+			for (k = 0; k < 6; k++)
-+				b[j][k] = erk[j * 6 + k];
-+
-+		for (j = 0; j < 8; j++) {
-+			int m, n;
-+			m = (b[j][0] << 1) | b[j][5];
-+
-+			n = (b[j][1] << 3) | (b[j][2] << 2) | (b[j][3] <<
-+							       1) | b[j][4];
-+
-+			for (k = 0; k < 4; k++)
-+				b[j][k] =
-+				    (sbox[j][m][n] & (1 << (3 - k))) ? 1 : 0;
-+		}
-+
-+		for (j = 0; j < 8; j++)
-+			for (k = 0; k < 4; k++)
-+				cb[j * 4 + k] = b[j][k];
-+		permute(pcb, cb, perm5, 32);
-+
-+		xor(r2, l, pcb, 32);
-+
-+		for (j = 0; j < 32; j++)
-+			l[j] = r[j];
-+
-+		for (j = 0; j < 32; j++)
-+			r[j] = r2[j];
-+
-+		kfree(er);
-+	}
-+
-+	concat(rl, r, l, 32, 32);
-+
-+	permute(out, rl, perm6, 64);
-+	kfree(pk1);
-+}
-+
-+static void
-+str_to_key(unsigned char *str, unsigned char *key)
-+{
-+	int i;
-+
-+	key[0] = str[0] >> 1;
-+	key[1] = ((str[0] & 0x01) << 6) | (str[1] >> 2);
-+	key[2] = ((str[1] & 0x03) << 5) | (str[2] >> 3);
-+	key[3] = ((str[2] & 0x07) << 4) | (str[3] >> 4);
-+	key[4] = ((str[3] & 0x0F) << 3) | (str[4] >> 5);
-+	key[5] = ((str[4] & 0x1F) << 2) | (str[5] >> 6);
-+	key[6] = ((str[5] & 0x3F) << 1) | (str[6] >> 7);
-+	key[7] = str[6] & 0x7F;
-+	for (i = 0; i < 8; i++) {
-+		key[i] = (key[i] << 1);
-+	}
-+}
-+
-+static void
-+smbhash(unsigned char *out, unsigned char *in, unsigned char *key, int forw)
-+{
-+	int i;
-+	char *outb; /* outb[64] */
-+	char *inb;  /* inb[64]  */
-+	char *keyb; /* keyb[64] */
-+	unsigned char key2[8];
-+
-+	outb = kmalloc(64 * 3,GFP_KERNEL);
-+	if(outb == NULL)
-+		return;
-+
-+	inb  = outb + 64;
-+	keyb = inb +  64;
-+
-+	str_to_key(key, key2);
-+
-+	for (i = 0; i < 64; i++) {
-+		inb[i] = (in[i / 8] & (1 << (7 - (i % 8)))) ? 1 : 0;
-+		keyb[i] = (key2[i / 8] & (1 << (7 - (i % 8)))) ? 1 : 0;
-+		outb[i] = 0;
-+	}
-+
-+	dohash(outb, inb, keyb, forw);
-+
-+	for (i = 0; i < 8; i++) {
-+		out[i] = 0;
-+	}
-+
-+	for (i = 0; i < 64; i++) {
-+		if (outb[i])
-+			out[i / 8] |= (1 << (7 - (i % 8)));
-+	}
-+	kfree(outb);
-+}
-+
-+void
-+E_P16(unsigned char *p14, unsigned char *p16)
-+{
-+	unsigned char sp8[8] =
-+	    { 0x4b, 0x47, 0x53, 0x21, 0x40, 0x23, 0x24, 0x25 };
-+	smbhash(p16, sp8, p14, 1);
-+	smbhash(p16 + 8, sp8, p14 + 7, 1);
-+}
-+
-+void
-+E_P24(unsigned char *p21, unsigned char *c8, unsigned char *p24)
-+{
-+	smbhash(p24, c8, p21, 1);
-+	smbhash(p24 + 8, c8, p21 + 7, 1);
-+	smbhash(p24 + 16, c8, p21 + 14, 1);
-+}
-+
-+void
-+D_P16(unsigned char *p14, unsigned char *in, unsigned char *out)
-+{
-+	smbhash(out, in, p14, 0);
-+	smbhash(out + 8, in + 8, p14 + 7, 0);
-+}
-+
-+void
-+E_old_pw_hash(unsigned char *p14, unsigned char *in, unsigned char *out)
-+{
-+	smbhash(out, in, p14, 1);
-+	smbhash(out + 8, in + 8, p14 + 7, 1);
-+}
-+
-+void
-+cred_hash1(unsigned char *out, unsigned char *in, unsigned char *key)
-+{
-+	unsigned char buf[8];
-+
-+	smbhash(buf, in, key, 1);
-+	smbhash(out, buf, key + 9, 1);
-+}
-+
-+void
-+cred_hash2(unsigned char *out, unsigned char *in, unsigned char *key)
-+{
-+	unsigned char buf[8];
-+	static unsigned char key2[8];
-+
-+	smbhash(buf, in, key, 1);
-+	key2[0] = key[7];
-+	smbhash(out, buf, key2, 1);
-+}
-+
-+void
-+cred_hash3(unsigned char *out, unsigned char *in, unsigned char *key, int forw)
-+{
-+	static unsigned char key2[8];
-+
-+	smbhash(out, in, key, forw);
-+	key2[0] = key[7];
-+	smbhash(out + 8, in + 8, key2, forw);
-+}
-diff -urN linux-2.4.29.old/fs/cifs/smbencrypt.c linux-2.4.29/fs/cifs/smbencrypt.c
---- linux-2.4.29.old/fs/cifs/smbencrypt.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/smbencrypt.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,295 @@
-+/* 
-+   Unix SMB/Netbios implementation.
-+   Version 1.9.
-+   SMB parameters and setup
-+   Copyright (C) Andrew Tridgell 1992-2000
-+   Copyright (C) Luke Kenneth Casson Leighton 1996-2000
-+   Modified by Jeremy Allison 1995.
-+   Copyright (C) Andrew Bartlett <abartlet@samba.org> 2002-2003
-+   Modified by Steve French (sfrench@us.ibm.com) 2002-2003
-+   
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+   
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+   
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/fs.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/random.h>
-+#include "cifs_unicode.h"
-+#include "cifspdu.h"
-+#include "md5.h"
-+#include "cifs_debug.h"
-+
-+#ifndef FALSE
-+#define FALSE 0
-+#endif
-+#ifndef TRUE
-+#define TRUE 1
-+#endif
-+
-+/* following came from the other byteorder.h to avoid include conflicts */
-+#define CVAL(buf,pos) (((unsigned char *)(buf))[pos])
-+#define SSVALX(buf,pos,val) (CVAL(buf,pos)=(val)&0xFF,CVAL(buf,pos+1)=(val)>>8)
-+#define SSVAL(buf,pos,val) SSVALX((buf),(pos),((__u16)(val)))
-+
-+/*The following definitions come from  lib/md4.c  */
-+
-+void mdfour(unsigned char *out, unsigned char *in, int n);
-+
-+/*The following definitions come from  libsmb/smbdes.c  */
-+
-+void E_P16(unsigned char *p14, unsigned char *p16);
-+void E_P24(unsigned char *p21, unsigned char *c8, unsigned char *p24);
-+void D_P16(unsigned char *p14, unsigned char *in, unsigned char *out);
-+void E_old_pw_hash(unsigned char *p14, unsigned char *in, unsigned char *out);
-+void cred_hash1(unsigned char *out, unsigned char *in, unsigned char *key);
-+void cred_hash2(unsigned char *out, unsigned char *in, unsigned char *key);
-+void cred_hash3(unsigned char *out, unsigned char *in, unsigned char *key,
-+		int forw);
-+
-+/*The following definitions come from  libsmb/smbencrypt.c  */
-+
-+void SMBencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24);
-+void E_md4hash(const unsigned char *passwd, unsigned char *p16);
-+void nt_lm_owf_gen(char *pwd, unsigned char nt_p16[16], unsigned char p16[16]);
-+void SMBOWFencrypt(unsigned char passwd[16], unsigned char *c8,
-+		   unsigned char p24[24]);
-+void NTLMSSPOWFencrypt(unsigned char passwd[8],
-+		       unsigned char *ntlmchalresp, unsigned char p24[24]);
-+void SMBNTencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24);
-+int decode_pw_buffer(char in_buffer[516], char *new_pwrd,
-+		     int new_pwrd_size, __u32 * new_pw_len);
-+
-+/*
-+   This implements the X/Open SMB password encryption
-+   It takes a password, a 8 byte "crypt key" and puts 24 bytes of 
-+   encrypted password into p24 */
-+/* Note that password must be uppercased and null terminated */
-+void
-+SMBencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24)
-+{
-+	unsigned char p14[15], p21[21];
-+
-+	memset(p21, '\0', 21);
-+	memset(p14, '\0', 14);
-+	strncpy((char *) p14, (char *) passwd, 14);
-+
-+/*	strupper((char *)p14); *//* BB at least uppercase the easy range */
-+	E_P16(p14, p21);
-+
-+	SMBOWFencrypt(p21, c8, p24);
-+	
-+	memset(p14,0,15);
-+	memset(p21,0,21);
-+}
-+
-+/* Routines for Windows NT MD4 Hash functions. */
-+static int
-+_my_wcslen(__u16 * str)
-+{
-+	int len = 0;
-+	while (*str++ != 0)
-+		len++;
-+	return len;
-+}
-+
-+/*
-+ * Convert a string into an NT UNICODE string.
-+ * Note that regardless of processor type 
-+ * this must be in intel (little-endian)
-+ * format.
-+ */
-+
-+static int
-+_my_mbstowcs(__u16 * dst, const unsigned char *src, int len)
-+{				/* not a very good conversion routine - change/fix */
-+	int i;
-+	__u16 val;
-+
-+	for (i = 0; i < len; i++) {
-+		val = *src;
-+		SSVAL(dst, 0, val);
-+		dst++;
-+		src++;
-+		if (val == 0)
-+			break;
-+	}
-+	return i;
-+}
-+
-+/* 
-+ * Creates the MD4 Hash of the users password in NT UNICODE.
-+ */
-+
-+void
-+E_md4hash(const unsigned char *passwd, unsigned char *p16)
-+{
-+	int len;
-+	__u16 wpwd[129];
-+
-+	/* Password cannot be longer than 128 characters */
-+	if(passwd) {
-+		len = strlen((char *) passwd);
-+		if (len > 128) {
-+			len = 128;
-+		}
-+		/* Password must be converted to NT unicode */
-+		_my_mbstowcs(wpwd, passwd, len);
-+	} else
-+		len = 0;
-+
-+	wpwd[len] = 0;	/* Ensure string is null terminated */
-+	/* Calculate length in bytes */
-+	len = _my_wcslen(wpwd) * sizeof (__u16);
-+
-+	mdfour(p16, (unsigned char *) wpwd, len);
-+	memset(wpwd,0,129 * 2);
-+}
-+
-+/* Does both the NT and LM owfs of a user's password */
-+void
-+nt_lm_owf_gen(char *pwd, unsigned char nt_p16[16], unsigned char p16[16])
-+{
-+	char passwd[514];
-+
-+	memset(passwd, '\0', 514);
-+	if (strlen(pwd) < 513)
-+		strcpy(passwd, pwd);
-+	else
-+		memcpy(passwd, pwd, 512);
-+	/* Calculate the MD4 hash (NT compatible) of the password */
-+	memset(nt_p16, '\0', 16);
-+	E_md4hash(passwd, nt_p16);
-+
-+	/* Mangle the passwords into Lanman format */
-+	passwd[14] = '\0';
-+/*	strupper(passwd); */
-+
-+	/* Calculate the SMB (lanman) hash functions of the password */
-+
-+	memset(p16, '\0', 16);
-+	E_P16((unsigned char *) passwd, (unsigned char *) p16);
-+
-+	/* clear out local copy of user's password (just being paranoid). */
-+	memset(passwd, '\0', sizeof (passwd));
-+}
-+
-+/* Does the NTLMv2 owfs of a user's password */
-+void
-+ntv2_owf_gen(const unsigned char owf[16], const char *user_n,
-+		const char *domain_n, unsigned char kr_buf[16],
-+		const struct nls_table *nls_codepage)
-+{
-+	wchar_t * user_u;
-+	wchar_t * dom_u;
-+	int user_l, domain_l;
-+	struct HMACMD5Context ctx;
-+
-+	/* might as well do one alloc to hold both (user_u and dom_u) */
-+	user_u = kmalloc(2048 * sizeof(wchar_t),GFP_KERNEL); 
-+	if(user_u == NULL)
-+		return;
-+	dom_u = user_u + 1024;
-+    
-+	/* push_ucs2(NULL, user_u, user_n, (user_l+1)*2, STR_UNICODE|STR_NOALIGN|STR_TERMINATE|STR_UPPER);
-+	   push_ucs2(NULL, dom_u, domain_n, (domain_l+1)*2, STR_UNICODE|STR_NOALIGN|STR_TERMINATE|STR_UPPER); */
-+
-+	/* BB user and domain may need to be uppercased */
-+	user_l = cifs_strtoUCS(user_u, user_n, 511, nls_codepage);
-+	domain_l = cifs_strtoUCS(dom_u, domain_n, 511, nls_codepage);
-+
-+	user_l++;		/* trailing null */
-+	domain_l++;
-+
-+	hmac_md5_init_limK_to_64(owf, 16, &ctx);
-+	hmac_md5_update((const unsigned char *) user_u, user_l * 2, &ctx);
-+	hmac_md5_update((const unsigned char *) dom_u, domain_l * 2, &ctx);
-+	hmac_md5_final(kr_buf, &ctx);
-+
-+	kfree(user_u);
-+}
-+
-+/* Does the des encryption from the NT or LM MD4 hash. */
-+void
-+SMBOWFencrypt(unsigned char passwd[16], unsigned char *c8,
-+	      unsigned char p24[24])
-+{
-+	unsigned char p21[21];
-+
-+	memset(p21, '\0', 21);
-+
-+	memcpy(p21, passwd, 16);
-+	E_P24(p21, c8, p24);
-+}
-+
-+/* Does the des encryption from the FIRST 8 BYTES of the NT or LM MD4 hash. */
-+void
-+NTLMSSPOWFencrypt(unsigned char passwd[8],
-+		  unsigned char *ntlmchalresp, unsigned char p24[24])
-+{
-+	unsigned char p21[21];
-+
-+	memset(p21, '\0', 21);
-+	memcpy(p21, passwd, 8);
-+	memset(p21 + 8, 0xbd, 8);
-+
-+	E_P24(p21, ntlmchalresp, p24);
-+}
-+
-+/* Does the NT MD4 hash then des encryption. */
-+
-+void
-+SMBNTencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24)
-+{
-+	unsigned char p21[21];
-+
-+	memset(p21, '\0', 21);
-+
-+	E_md4hash(passwd, p21);
-+	SMBOWFencrypt(p21, c8, p24);
-+}
-+
-+/* Does the md5 encryption from the NT hash for NTLMv2. */
-+void
-+SMBOWFencrypt_ntv2(const unsigned char kr[16],
-+                   const struct data_blob * srv_chal,
-+                   const struct data_blob * cli_chal, unsigned char resp_buf[16])
-+{
-+        struct HMACMD5Context ctx;
-+
-+        hmac_md5_init_limK_to_64(kr, 16, &ctx);
-+        hmac_md5_update(srv_chal->data, srv_chal->length, &ctx);
-+        hmac_md5_update(cli_chal->data, cli_chal->length, &ctx);
-+        hmac_md5_final(resp_buf, &ctx);
-+}
-+
-+void
-+SMBsesskeygen_ntv2(const unsigned char kr[16],
-+		   const unsigned char *nt_resp, __u8 sess_key[16])
-+{
-+	struct HMACMD5Context ctx;
-+
-+	hmac_md5_init_limK_to_64(kr, 16, &ctx);
-+	hmac_md5_update(nt_resp, 16, &ctx);
-+	hmac_md5_final((unsigned char *) sess_key, &ctx);
-+}
-+
-+void
-+SMBsesskeygen_ntv1(const unsigned char kr[16],
-+		   const unsigned char *nt_resp, __u8 sess_key[16])
-+{
-+	mdfour((unsigned char *) sess_key, (unsigned char *) kr, 16);
-+}
-diff -urN linux-2.4.29.old/fs/cifs/smberr.c linux-2.4.29/fs/cifs/smberr.c
---- linux-2.4.29.old/fs/cifs/smberr.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/smberr.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,240 @@
-+/* 
-+   Unix SMB/Netbios implementation.
-+   Version 1.9.
-+   Copyright (C) Andrew Tridgell 1998
-+   Copyright (C) Steve French (sfrench@us.ibm.com) 2002
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+   
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+   
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+*/
-+include "smberr.h"
-+#define NO_SYSLOG
-+/* error code stuff - put together by Merik Karman
-+   merik@blackadder.dsh.oz.au */
-+    typedef const struct {
-+	char *name;
-+	int code;
-+	char *message;
-+	int posix_code;
-+} err_code_struct;
-+
-+/* Dos Error Messages */
-+err_code_struct dos_msgs[] = {
-+	{"ERRbadfunc", ERRbadfunc, "Invalid function.", -EINVAL},
-+	{"ERRbadfile", ERRbadfile, "File not found.", -ENOENT},
-+	{"ERRbadpath", ERRbadpath, "Directory invalid.", -ENOENT},
-+	{"ERRnofids", ERRnofids, "No file descriptors available", -EMFILE},
-+	{"ERRnoaccess", ERRnoaccess, "Access denied.", -EACCES},
-+	{"ERRbadfid", ERRbadfid, "Invalid file handle.", -EBADF},
-+	{"ERRbadmcb", 7, "Memory control blocks destroyed.", -EIO},
-+	{"ERRnomem", ERRnomem,
-+	 "Insufficient server memory to perform the requested function.",
-+	 -ENOMEM},
-+	{"ERRbadmem", ERRbadmem, "Invalid memory block address.", -EFAULT},
-+	{"ERRbadenv", ERRbadenv, "Invalid environment.", -EFAULT},
-+	{"ERRbadformat", 11, "Invalid format.", -EINVAL},
-+	{"ERRbadaccess", ERRbadaccess, "Invalid open mode." - EACCES},
-+	{"ERRbaddata", ERRbaddata, "Invalid data.", -EIO},
-+	{"ERR", ERRres, "reserved.", -EIO},
-+	{"ERRbaddrive", ERRbaddrive, "Invalid drive specified.", -ENXIO},
-+	{"ERRremcd", ERRremcd,
-+	 "A Delete Directory request attempted  to  remove  the  server's  current directory.",
-+	 -EIO},
-+	{"ERRdiffdevice", ERRdiffdevice, "Not same device.", -EXDEV},
-+	{"ERRnofiles", ERRnofiles, "A File Search command can find no more files matching the specified criteria.", -ENOENT},	/* Note: must map to zero manually in some places such as readdir */
-+	{"ERRbadshare", ERRbadshare,
-+	 "The sharing mode specified for an Open conflicts with existing  FIDs  on the file.",
-+	 -EXTBSY},
-+	{"ERRlock", ERRlock,
-+	 "A Lock request conflicted with an existing lock or specified an  invalid mode,  or an Unlock requested attempted to remove a lock held by another process.",
-+	 -EACCES},
-+	{"ERRunsup", ERRunsup, "The operation is unsupported", -EINVAL},
-+	{"ERRnosuchshare", ERRnosuchshare,
-+	 "You specified an invalid share name", -ENXIO},
-+	{"ERRfilexists", ERRfilexists,
-+	 "The file named in a Create Directory, Make  New  File  or  Link  request already exists.",
-+	 -EEXIST},
-+	{"ERRinvalidname", ERRinvalidname, "Invalid name", -ENOENT},
-+	{"ERRdiskfull", ERRdiskfull, "Disk full", -ENOSPC}
-+
-+	{"ERRmoredata", ERRmoredata,
-+	 "There is more data to be returned.",},
-+	{"ERRinvgroup", 2455, "Invalid workgroup (try the -W option)"},
-+	{NULL, -1, NULL, -EIO}
-+};
-+
-+/* Server Error Messages */
-+err_code_struct server_msgs[] = {
-+	{"ERRerror", 1, "Non-specific error code."},
-+	{"ERRbadpw", 2,
-+	 "Bad password - name/password pair in a Tree Connect or Session Setup are invalid."},
-+	{"ERRbadtype", 3, "reserved."},
-+	{"ERRaccess", 4,
-+	 "The requester does not have  the  necessary  access  rights  within  the specified  context for the requested function. The context is defined by the TID or the UID."},
-+	{"ERRinvnid", 5,
-+	 "The tree ID (TID) specified in a command was invalid."},
-+	{"ERRinvnetname", 6, "Invalid network name in tree connect."},
-+	{"ERRinvdevice", 7,
-+	 "Invalid device - printer request made to non-printer connection or  non-printer request made to printer connection."},
-+	{"ERRqfull", 49,
-+	 "Print queue full (files) -- returned by open print file."},
-+	{"ERRqtoobig", 50, "Print queue full -- no space."},
-+	{"ERRqeof", 51, "EOF on print queue dump."},
-+	{"ERRinvpfid", 52, "Invalid print file FID."},
-+	{"ERRsmbcmd", 64,
-+	 "The server did not recognize the command received."},
-+	{"ERRsrverror", 65,
-+	 "The server encountered an internal error, e.g., system file unavailable."},
-+	{"ERRfilespecs", 67,
-+	 "The file handle (FID) and pathname parameters contained an invalid  combination of values."},
-+	{"ERRreserved", 68, "reserved."},
-+	{"ERRbadpermits", 69,
-+	 "The access permissions specified for a file or directory are not a valid combination.  The server cannot set the requested attribute."},
-+	{"ERRreserved", 70, "reserved."},
-+	{"ERRsetattrmode", 71,
-+	 "The attribute mode in the Set File Attribute request is invalid."},
-+	{"ERRpaused", 81, "Server is paused."},
-+	{"ERRmsgoff", 82, "Not receiving messages."},
-+	{"ERRnoroom", 83, "No room to buffer message."},
-+	{"ERRrmuns", 87, "Too many remote user names."},
-+	{"ERRtimeout", 88, "Operation timed out."},
-+	{"ERRnoresource", 89,
-+	 "No resources currently available for request."},
-+	{"ERRtoomanyuids", 90, "Too many UIDs active on this session."},
-+	{"ERRbaduid", 91,
-+	 "The UID is not known as a valid ID on this session."},
-+	{"ERRusempx", 250, "Temp unable to support Raw, use MPX mode."},
-+	{"ERRusestd", 251,
-+	 "Temp unable to support Raw, use standard read/write."},
-+	{"ERRcontmpx", 252, "Continue in MPX mode."},
-+	{"ERRreserved", 253, "reserved."},
-+	{"ERRreserved", 254, "reserved."},
-+	{"ERRnosupport", 0xFFFF, "Function not supported."},
-+	{NULL, -1, NULL}
-+};
-+
-+/* Hard Error Messages */
-+err_code_struct hard_msgs[] = {
-+	{"ERRnowrite", 19,
-+	 "Attempt to write on write-protected diskette."},
-+	{"ERRbadunit", 20, "Unknown unit."},
-+	{"ERRnotready", 21, "Drive not ready."},
-+	{"ERRbadcmd", 22, "Unknown command."},
-+	{"ERRdata", 23, "Data error (CRC)."},
-+	{"ERRbadreq", 24, "Bad request structure length."},
-+	{"ERRseek", 25, "Seek error."},
-+	{"ERRbadmedia", 26, "Unknown media type."},
-+	{"ERRbadsector", 27, "Sector not found."},
-+	{"ERRnopaper", 28, "Printer out of paper."},
-+	{"ERRwrite", 29, "Write fault."},
-+	{"ERRread", 30, "Read fault."},
-+	{"ERRgeneral", 31, "General failure."},
-+	{"ERRbadshare", 32, "An open conflicts with an existing open."},
-+	{"ERRlock", 33,
-+	 "A Lock request conflicted with an existing lock or specified an invalid mode, or an Unlock requested attempted to remove a lock held by another process."},
-+	{"ERRwrongdisk", 34, "The wrong disk was found in a drive."},
-+	{"ERRFCBUnavail", 35, "No FCBs are available to process request."},
-+	{"ERRsharebufexc", 36, "A sharing buffer has been exceeded."},
-+	{NULL, -1, NULL}
-+};
-+
-+
-+const struct {
-+	int code;
-+	char *class;
-+	err_code_struct *err_msgs;
-+} err_classes[] = {
-+	{
-+	0, "SUCCESS", NULL}, {
-+	0x01, "ERRDOS", dos_msgs}, {
-+	0x02, "ERRSRV", server_msgs}, {
-+	0x03, "ERRHRD", hard_msgs}, {
-+	0x04, "ERRXOS", NULL}, {
-+	0xE1, "ERRRMX1", NULL}, {
-+	0xE2, "ERRRMX2", NULL}, {
-+	0xE3, "ERRRMX3", NULL}, {
-+	0xFF, "ERRCMD", NULL}, {
-+-1, NULL, NULL}};
-+
-+
-+/****************************************************************************
-+return a SMB error string from a SMB buffer
-+****************************************************************************/
-+char *smb_dos_errstr(char *inbuf)
-+{
-+	static pstring ret;
-+	int class = CVAL(inbuf, smb_rcls);
-+	int num = SVAL(inbuf, smb_err);
-+	int i, j;
-+
-+	for (i = 0; err_classes[i].class; i++)
-+		if (err_classes[i].code == class) {
-+			if (err_classes[i].err_msgs) {
-+				err_code_struct *err =
-+				    err_classes[i].err_msgs;
-+				for (j = 0; err[j].name; j++)
-+					if (num == err[j].code) {
-+						if (DEBUGLEVEL > 0)
-+							slprintf(ret,
-+								 sizeof
-+								 (ret) - 1,
-+								 "%s - %s (%s)",
-+								 err_classes
-+								 [i].class,
-+								 err[j].
-+								 name,
-+								 err[j].
-+								 message);
-+						else
-+							slprintf(ret,
-+								 sizeof
-+								 (ret) - 1,
-+								 "%s - %s",
-+								 err_classes
-+								 [i].class,
-+								 err[j].
-+								 name);
-+						return ret;
-+					}
-+			}
-+
-+			slprintf(ret, sizeof(ret) - 1, "%s - %d",
-+				 err_classes[i].class, num);
-+			return ret;
-+		}
-+
-+	slprintf(ret, sizeof(ret) - 1, "Error: Unknown error (%d,%d)",
-+		 class, num);
-+	return (ret);
-+}
-+
-+
-+/*****************************************************************************
-+ returns an WERROR error message.
-+ *****************************************************************************/
-+char *werror_str(WERROR status)
-+{
-+	static fstring msg;
-+	slprintf(msg, sizeof(msg), "WIN32 code 0x%08x", W_ERROR_V(status));
-+	return msg;
-+}
-+
-+
-+/*****************************************************************************
-+map a unix errno to a win32 error
-+ *****************************************************************************/
-+WERROR map_werror_from_unix(int error)
-+{
-+	NTSTATUS status = map_nt_error_from_unix(error);
-+	return ntstatus_to_werror(status);
-+}
-diff -urN linux-2.4.29.old/fs/cifs/smberr.h linux-2.4.29/fs/cifs/smberr.h
---- linux-2.4.29.old/fs/cifs/smberr.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/smberr.h	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,113 @@
-+/*
-+ *   fs/cifs/smberr.h
-+ *
-+ *   Copyright (c) International Business Machines  Corp., 2002
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   See Error Codes section of the SNIA CIFS Specification 
-+ *   for more information 
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 
-+ */
-+
-+#define SUCCESS 0		/* The request was successful. */
-+#define ERRDOS 0x01		/* Error is from the core DOS operating system set */
-+#define ERRSRV 0x02		/* Error is generated by the file server daemon */
-+#define ERRHRD 0x03		/* Error is a hardware error. */
-+#define ERRCMD 0xFF		/*  Command was not in the "SMB" format. */
-+
-+/* The following error codes may be generated with the SUCCESS error class.*/
-+
-+#define SUCCESS 0		/* The request was successful. */
-+
-+/* The following error codes may be generated with the ERRDOS error class.*/
-+
-+#define ERRbadfunc 1		/* Invalid function. The server did not recognize or could not perform a system call generated by the server, e.g., set the DIRECTORY attribute on a data file, invalid seek mode. */
-+#define ERRbadfile 2		/*File not found. The last component of a file's pathname could not be found. */
-+#define ERRbadpath 3		/* Directory invalid. A directory component in a pathname could not be found. */
-+#define ERRnofids 4		/* Too many open files. The server has no file handles available. */
-+#define ERRnoaccess 5		/* Access denied, the client's context does not permit the requested function. This includes the following conditions: invalid rename command, write to Fid open for read only, read on Fid open for write only, attempt to delete a non-empty directory */
-+#define ERRbadfid 6		/* Invalid file handle. The file handle specified was not recognized by the server. */
-+#define ERRbadmcb 7		/* Memory control blocks destroyed. */
-+#define ERRnomem 8		/* Insufficient server memory to perform the requested function. */
-+#define ERRbadmem 9		/* Invalid memory block address. */
-+#define ERRbadenv 10		/* Invalid environment. */
-+#define ERRbadformat 11		/* Invalid format. */
-+#define ERRbadaccess 12		/* Invalid open mode. */
-+#define ERRbaddata 13		/* Invalid data (generated only by IOCTL calls within the server). */
-+#define ERRbaddrive 15		/* Invalid drive specified. */
-+#define ERRremcd 16		/* A Delete Directory request attempted to remove the server's current directory. */
-+#define ERRdiffdevice 17	/* Not same device (e.g., a cross volume rename was attempted */
-+#define ERRnofiles 18		/* A File Search command can find no more files matching the specified criteria. */
-+#define ERRgeneral 31
-+#define ERRbadshare 32		/* The sharing mode specified for an Open conflicts with existing FIDs on the file. */
-+#define ERRlock 33		/* A Lock request conflicted with an existing lock or specified an invalid mode, or an Unlock requested attempted to remove a lock held by another process. */
-+#define ERRunsup     50
-+#define ERRnosuchshare 67
-+#define ERRfilexists 80		/* The file named in the request already exists. */
-+#define ERRinvparm   87
-+#define ERRdiskfull  112
-+#define ERRinvname   123
-+#define ERRdirnotempty 145
-+#define ERRnotlocked   158
-+#define ERRalreadyexists 183
-+#define ERRbadpipe 230
-+#define ERRpipebusy 231
-+#define ERRpipeclosing 232
-+#define ERRnotconnected 233
-+#define ERRmoredata    234
-+#define ErrQuota 0x200		/* The operation would cause a quota limit to be exceeded. */
-+#define ErrNotALink 0x201	/* A link operation was performed on a pathname that
-+				   was not a link. */
-+
-+/* Following error codes may be generated with the ERRSRV error
-+class.*/
-+
-+#define ERRerror 1		/* Non-specific error code. It is returned under the following conditions: resource other than disk space exhausted (e.g. TIDs), first SMB command was not negotiate, multiple negotiates attempted, and internal server error. */
-+#define ERRbadpw 2		/* Bad password - name/password pair in a TreeConnect or Session Setup are invalid. */
-+#define ERRbadtype 3		/* used for indicating DFS referral needed */
-+#define ERRaccess 4		/* The client does not have the necessary access rights within the specified context for requested function. */
-+#define ERRinvtid 5		/* The Tid specified in a command was invalid. */
-+#define ERRinvnetname 6		/* Invalid network name in tree connect. */
-+#define ERRinvdevice 7		/* Invalid device - printer request made to non-printer connection or non-printer request made to printer connection. */
-+#define ERRqfull 49		/* Print queue full (files) -- returned by open print file. */
-+#define ERRqtoobig 50		/* Print queue full -- no space. */
-+#define ERRqeof         51	/* EOF on print queue dump */
-+#define ERRinvpfid      52	/* Invalid print file FID. */
-+#define ERRsmbcmd       64	/* The server did not recognize the command received. */
-+#define ERRsrverror     65	/* The server encountered an internal error, e.g., system file unavailable. */
-+#define ERRbadBID       66	/* (obsolete) */
-+#define ERRfilespecs    67	/* The Fid and pathname parameters contained an invalid combination of values. */
-+#define ERRbadLink      68	/* (obsolete) */
-+#define ERRbadpermits   69	/* The access permissions specified for a file or directory are not a valid combination. */
-+#define ERRbadPID       70
-+#define ERRsetattrmode  71	/* attribute (mode) is invalid */
-+#define ERRpaused       81	/* Server is paused */
-+#define ERRmsgoff	82	/* reserved - messaging off */
-+#define ERRnoroom       83	/* reserved - no room for message */
-+#define ERRrmuns        87	/* reserved - too many remote names */
-+#define ERRtimeout      88	/* operation timed out */
-+#define ERRnoresource   89	/* No resources available for request */
-+#define ERRtoomanyuids  90	/* Too many UIDs active on this session */
-+#define ERRbaduid       91	/* The UID is not known as a valid user */
-+#define ERRusempx      250	/* temporarily unable to use raw */
-+#define ERRusestd      251	/* temporarily unable to use either raw or mpx */
-+#define ERR_NOTIFY_ENUM_DIR 1024
-+#define ERRaccountexpired 2239
-+#define ERRbadclient      2240
-+#define ERRbadLogonTime   2241
-+#define ERRpasswordExpired 2242
-+#define ERRnetlogonNotStarted 2455
-+#define ERRnosupport       0xFFFF
-diff -urN linux-2.4.29.old/fs/cifs/TODO linux-2.4.29/fs/cifs/TODO
---- linux-2.4.29.old/fs/cifs/TODO	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/TODO	2004-07-14 00:25:04.000000000 +0200
-@@ -0,0 +1,106 @@
-+version 1.16 May 27, 2004
-+
-+A Partial List of Missing Features
-+==================================
-+
-+Contributions are welcome.  There are plenty of opportunities
-+for visible, important contributions to this module.  Here
-+is a partial list of the known problems and missing features:
-+
-+a) Support for SecurityDescriptors for chmod/chgrp/chown so
-+these can be supported for Windows servers
-+
-+b) Better pam/winbind integration
-+
-+c) multi-user mounts - multiplexed sessionsetups over single vc
-+(ie tcp session) - prettying up needed
-+
-+d) Kerberos/SPNEGO session setup support - (started)
-+
-+e) NTLMv2 authentication (mostly implemented)
-+
-+f) MD5-HMAC signing SMB PDUs when SPNEGO style SessionSetup 
-+used (Kerberos or NTLMSSP). Signing alreadyimplemented for NTLM
-+and raw NTLMSSP already. This is important when enabling
-+extended security and mounting to Windows 2003 Servers
-+
-+f) Directory entry caching relies on a 1 second timer, rather than 
-+using FindNotify or equivalent.  - (started)
-+
-+g) A few byte range testcases fail due to POSIX vs. Windows/CIFS
-+style byte range lock differences
-+
-+h) quota support
-+
-+i) support for the Linux 2.5 kernel new feature get_xattr and set_xattr
-+which will allow us to expose dos attributes as well as real
-+ACLs. This support has been started in the current code, but is
-+ifdeffed out.
-+
-+k) finish writepages support (multi-page write behind for improved
-+performance) and syncpage
-+
-+l) hook lower into the sockets api (as NFS/SunRPC does) to avoid the
-+extra copy in/out of the socket buffers in some cases.
-+
-+m) finish support for IPv6.  This is mostly complete but
-+needs a simple inet_pton like function to convert ipv6
-+addresses in string representation.
-+
-+o) Better optimize open (and pathbased setfilesize) to reduce the
-+oplock breaks coming from windows srv.  Piggyback identical file
-+opens on top of each other by incrementing reference count rather
-+than resending (helps reduce server resource utilization and avoid
-+spurious oplock breaks).
-+
-+p) Improve performance of readpages by sending more than one read
-+at a time when 8 pages or more are requested.  Evaluate whether
-+reads larger than 16K would be helpful.
-+
-+q) For support of Windows9x/98 we need to retry failed mounts
-+to *SMBSERVER (default server name) with the uppercase hostname
-+in the RFC1001 session_init request.
-+
-+r) Add Extended Attributed support (for storing UID/GID info
-+to Windows servers)
-+
-+s) Finish fcntl D_NOTIFY support so kde and gnome file list windows
-+will autorefresh
-+
-+t) Add GUI tool to configure /proc/fs/cifs settings and for display of
-+the CIFS statistics
-+
-+KNOWN BUGS (updated May 27, 2004)
-+====================================
-+1) existing symbolic links (Windows reparse points) are recognized but
-+can not be created remotely. They are implemented for Samba and those that
-+support the CIFS Unix extensions but Samba has a bug currently handling
-+symlink text beginning with slash
-+2) follow_link and readdir code does not follow dfs junctions
-+but recognizes them
-+3) create of new files to FAT partitions on Windows servers can
-+succeed but still return access denied (appears to be Windows 
-+server not cifs client problem) and has not been reproduced recently.
-+NTFS partitions do not have this problem.
-+4) debug connectathon lock test case 10 which fails against
-+Samba (may be unmappable due to POSIX to Windows lock model
-+differences but worth investigating).  Also debug Samba to 
-+see why lock test case 7 takes longer to complete to Samba
-+than to Windows.
-+
-+Misc testing to do
-+==================
-+1) check out max path names and max path name components against various server
-+types. Try nested symlinks. Return max path name in stat -f information
-+
-+2) Modify file portion of ltp so it can run against a mounted network
-+share and run it against cifs vfs.
-+
-+3) Additional performance testing and optimization using iozone and similar - 
-+there are some easy changes that can be done to parallelize sequential writes,
-+and when signing is disabled to request larger read sizes (larger than 
-+negotiated size) and send larger write sizes to modern servers.
-+
-+4) More exhaustively test the recently added NT4 support against various
-+NT4 service pack levels.
-+
-diff -urN linux-2.4.29.old/fs/cifs/transport.c linux-2.4.29/fs/cifs/transport.c
---- linux-2.4.29.old/fs/cifs/transport.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/fs/cifs/transport.c	2004-07-14 00:25:05.000000000 +0200
-@@ -0,0 +1,434 @@
-+/*
-+ *   fs/cifs/transport.c
-+ *
-+ *   Copyright (C) International Business Machines  Corp., 2002,2004
-+ *   Author(s): Steve French (sfrench@us.ibm.com)
-+ *
-+ *   This library is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU Lesser General Public License as published
-+ *   by the Free Software Foundation; either version 2.1 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This library is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-+ *   the GNU Lesser General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU Lesser General Public License
-+ *   along with this library; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 
-+ */
-+
-+#include <linux/fs.h>
-+#include <linux/list.h>
-+#include <linux/wait.h>
-+#include <linux/net.h>
-+#include <linux/version.h>
-+#include <asm/uaccess.h>
-+#include <asm/processor.h>
-+#include "cifspdu.h"
-+#include "cifsglob.h"
-+#include "cifsproto.h"
-+#include "cifs_debug.h"
-+
-+extern kmem_cache_t *cifs_mid_cachep;
-+extern kmem_cache_t *cifs_oplock_cachep;
-+
-+struct mid_q_entry *
-+AllocMidQEntry(struct smb_hdr *smb_buffer, struct cifsSesInfo *ses)
-+{
-+	struct mid_q_entry *temp;
-+
-+	if (ses == NULL) {
-+		cERROR(1, ("Null session passed in to AllocMidQEntry "));
-+		return NULL;
-+	}
-+	if (ses->server == NULL) {
-+		cERROR(1, ("Null TCP session in AllocMidQEntry"));
-+		return NULL;
-+	}
-+	
-+	temp = (struct mid_q_entry *) kmem_cache_alloc(cifs_mid_cachep,
-+						       SLAB_KERNEL);
-+	if (temp == NULL)
-+		return temp;
-+	else {
-+		memset(temp, 0, sizeof (struct mid_q_entry));
-+		temp->mid = smb_buffer->Mid;	/* always LE */
-+		temp->pid = current->pid;
-+		temp->command = smb_buffer->Command;
-+		cFYI(1, ("For smb_command %d", temp->command));
-+		do_gettimeofday(&temp->when_sent);
-+		temp->ses = ses;
-+		temp->tsk = current;
-+	}
-+
-+	spin_lock(&GlobalMid_Lock);
-+	list_add_tail(&temp->qhead, &ses->server->pending_mid_q);
-+	atomic_inc(&midCount);
-+	temp->midState = MID_REQUEST_ALLOCATED;
-+	spin_unlock(&GlobalMid_Lock);
-+	return temp;
-+}
-+
-+void
-+DeleteMidQEntry(struct mid_q_entry *midEntry)
-+{
-+	spin_lock(&GlobalMid_Lock);
-+	midEntry->midState = MID_FREE;
-+	list_del(&midEntry->qhead);
-+	atomic_dec(&midCount);
-+	spin_unlock(&GlobalMid_Lock);
-+	cifs_buf_release(midEntry->resp_buf);
-+	kmem_cache_free(cifs_mid_cachep, midEntry);
-+}
-+
-+struct oplock_q_entry *
-+AllocOplockQEntry(struct inode * pinode, __u16 fid, struct cifsTconInfo * tcon)
-+{
-+	struct oplock_q_entry *temp;
-+	if ((pinode== NULL) || (tcon == NULL)) {
-+		cERROR(1, ("Null parms passed to AllocOplockQEntry"));
-+		return NULL;
-+	}
-+	temp = (struct oplock_q_entry *) kmem_cache_alloc(cifs_oplock_cachep,
-+						       SLAB_KERNEL);
-+	if (temp == NULL)
-+		return temp;
-+	else {
-+		temp->pinode = pinode;
-+		temp->tcon = tcon;
-+		temp->netfid = fid;
-+		spin_lock(&GlobalMid_Lock);
-+		list_add_tail(&temp->qhead, &GlobalOplock_Q);
-+		spin_unlock(&GlobalMid_Lock);
-+	}
-+	return temp;
-+
-+}
-+
-+void DeleteOplockQEntry(struct oplock_q_entry * oplockEntry)
-+{
-+	spin_lock(&GlobalMid_Lock); 
-+    /* should we check if list empty first? */
-+	list_del(&oplockEntry->qhead);
-+	spin_unlock(&GlobalMid_Lock);
-+	kmem_cache_free(cifs_oplock_cachep, oplockEntry);
-+}
-+
-+int
-+smb_send(struct socket *ssocket, struct smb_hdr *smb_buffer,
-+	 unsigned int smb_buf_length, struct sockaddr *sin)
-+{
-+	int rc = 0;
-+	int i = 0;
-+	struct msghdr smb_msg;
-+	struct iovec iov;
-+	mm_segment_t temp_fs;
-+
-+	if(ssocket == NULL)
-+		return -ENOTSOCK; /* BB eventually add reconnect code here */
-+	iov.iov_base = smb_buffer;
-+	iov.iov_len = smb_buf_length + 4;
-+
-+	smb_msg.msg_name = sin;
-+	smb_msg.msg_namelen = sizeof (struct sockaddr);
-+	smb_msg.msg_iov = &iov;
-+	smb_msg.msg_iovlen = 1;
-+	smb_msg.msg_control = NULL;
-+	smb_msg.msg_controllen = 0;
-+	smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; /* BB add more flags?*/
-+
-+	/* smb header is converted in header_assemble. bcc and rest of SMB word
-+	   area, and byte area if necessary, is converted to littleendian in 
-+	   cifssmb.c and RFC1001 len is converted to bigendian in smb_send 
-+	   Flags2 is converted in SendReceive */
-+
-+	smb_buffer->smb_buf_length = cpu_to_be32(smb_buffer->smb_buf_length);
-+	cFYI(1, ("Sending smb of length %d ", smb_buf_length));
-+	dump_smb(smb_buffer, smb_buf_length + 4);
-+
-+	temp_fs = get_fs();	/* we must turn off socket api parm checking */
-+	set_fs(get_ds());
-+	while(iov.iov_len > 0) {
-+		rc = sock_sendmsg(ssocket, &smb_msg, smb_buf_length + 4);
-+		if ((rc == -ENOSPC) || (rc == -EAGAIN)) {
-+			i++;
-+			if(i > 60) {
-+				cERROR(1,
-+				   ("sends on sock %p stuck for 30 seconds",
-+				    ssocket));
-+				rc = -EAGAIN;
-+				break;
-+			}
-+			set_current_state(TASK_INTERRUPTIBLE);
-+			schedule_timeout(HZ/2);
-+			continue;
-+		}
-+		if (rc < 0) 
-+			break;
-+		iov.iov_base += rc;
-+		iov.iov_len -= rc;
-+	}
-+	set_fs(temp_fs);
-+
-+	if (rc < 0) {
-+		cERROR(1,("Error %d sending data on socket to server.", rc));
-+	} else {
-+		rc = 0;
-+	}
-+
-+	return rc;
-+}
-+
-+int
-+SendReceive(const unsigned int xid, struct cifsSesInfo *ses,
-+	    struct smb_hdr *in_buf, struct smb_hdr *out_buf,
-+	    int *pbytes_returned, const int long_op)
-+{
-+	int rc = 0;
-+	unsigned int receive_len;
-+	long timeout;
-+	struct mid_q_entry *midQ;
-+
-+	if (ses == NULL) {
-+		cERROR(1,("Null smb session"));
-+		return -EIO;
-+	}
-+	if(ses->server == NULL) {
-+		cERROR(1,("Null tcp session"));
-+		return -EIO;
-+	}
-+
-+	/* Ensure that we do not send more than 50 overlapping requests 
-+	   to the same server. We may make this configurable later or
-+	   use ses->maxReq */
-+	if(long_op == -1) {
-+		/* oplock breaks must not be held up */
-+		atomic_inc(&ses->server->inFlight);
-+	} else {
-+		spin_lock(&GlobalMid_Lock); 
-+		while(1) {        
-+			if(atomic_read(&ses->server->inFlight) >= CIFS_MAX_REQ){
-+				spin_unlock(&GlobalMid_Lock);
-+				wait_event(ses->server->request_q,
-+					atomic_read(&ses->server->inFlight)
-+					 < CIFS_MAX_REQ);
-+				spin_lock(&GlobalMid_Lock);
-+			} else {
-+				if(ses->server->tcpStatus == CifsExiting) {
-+					spin_unlock(&GlobalMid_Lock);
-+					return -ENOENT;
-+				}
-+
-+			/* can not count locking commands against total since
-+			   they are allowed to block on server */
-+					
-+				if(long_op < 3) {
-+				/* update # of requests on the wire to server */
-+					atomic_inc(&ses->server->inFlight);
-+				}
-+				spin_unlock(&GlobalMid_Lock);
-+				break;
-+			}
-+		}
-+	}
-+	/* make sure that we sign in the same order that we send on this socket 
-+	   and avoid races inside tcp sendmsg code that could cause corruption
-+	   of smb data */
-+
-+	down(&ses->server->tcpSem); 
-+
-+	if (ses->server->tcpStatus == CifsExiting) {
-+		rc = -ENOENT;
-+		goto out_unlock;
-+	} else if (ses->server->tcpStatus == CifsNeedReconnect) {
-+		cFYI(1,("tcp session dead - return to caller to retry"));
-+		rc = -EAGAIN;
-+		goto out_unlock;
-+	} else if (ses->status != CifsGood) {
-+		/* check if SMB session is bad because we are setting it up */
-+		if((in_buf->Command != SMB_COM_SESSION_SETUP_ANDX) && 
-+			(in_buf->Command != SMB_COM_NEGOTIATE)) {
-+			rc = -EAGAIN;
-+			goto out_unlock;
-+		} /* else ok - we are setting up session */
-+	}
-+	midQ = AllocMidQEntry(in_buf, ses);
-+	if (midQ == NULL) {
-+		up(&ses->server->tcpSem);
-+		/* If not lock req, update # of requests on wire to server */
-+		if(long_op < 3) {
-+			atomic_dec(&ses->server->inFlight); 
-+			wake_up(&ses->server->request_q);
-+		}
-+		return -ENOMEM;
-+	}
-+
-+	if (in_buf->smb_buf_length > CIFS_MAX_MSGSIZE + MAX_CIFS_HDR_SIZE - 4) {
-+		up(&ses->server->tcpSem);
-+		cERROR(1,
-+		       ("Illegal length, greater than maximum frame, %d ",
-+			in_buf->smb_buf_length));
-+		DeleteMidQEntry(midQ);
-+		/* If not lock req, update # of requests on wire to server */
-+		if(long_op < 3) {
-+			atomic_dec(&ses->server->inFlight); 
-+			wake_up(&ses->server->request_q);
-+		}
-+		return -EIO;
-+	}
-+
-+	if (in_buf->smb_buf_length > 12)
-+		in_buf->Flags2 = cpu_to_le16(in_buf->Flags2);
-+	
-+	rc = cifs_sign_smb(in_buf, ses, &midQ->sequence_number);
-+
-+	midQ->midState = MID_REQUEST_SUBMITTED;
-+	rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length,
-+		      (struct sockaddr *) &(ses->server->addr.sockAddr));
-+	if(rc < 0) {
-+		DeleteMidQEntry(midQ);
-+		up(&ses->server->tcpSem);
-+		/* If not lock req, update # of requests on wire to server */
-+		if(long_op < 3) {
-+			atomic_dec(&ses->server->inFlight); 
-+			wake_up(&ses->server->request_q);
-+		}
-+		return rc;
-+	} else
-+		up(&ses->server->tcpSem);
-+	if (long_op == -1)
-+		goto cifs_no_response_exit;
-+	else if (long_op == 2) /* writes past end of file can take looooong time */
-+		timeout = 300 * HZ;
-+	else if (long_op == 1)
-+		timeout = 45 * HZ; /* should be greater than 
-+			servers oplock break timeout (about 43 seconds) */
-+	else if (long_op > 2) {
-+		timeout = MAX_SCHEDULE_TIMEOUT;
-+	} else
-+		timeout = 15 * HZ;
-+	/* wait for 15 seconds or until woken up due to response arriving or 
-+	   due to last connection to this server being unmounted */
-+	if (signal_pending(current)) {
-+		/* if signal pending do not hold up user for full smb timeout
-+		but we still give response a change to complete */
-+		if(midQ->midState & MID_REQUEST_SUBMITTED) {
-+			set_current_state(TASK_UNINTERRUPTIBLE);
-+			timeout = sleep_on_timeout(&ses->server->response_q,2 * HZ);
-+		}
-+	} else { /* using normal timeout */
-+		/* timeout = wait_event_interruptible_timeout(ses->server->response_q,
-+			(midQ->midState & MID_RESPONSE_RECEIVED) || 
-+			((ses->server->tcpStatus != CifsGood) &&
-+			 (ses->server->tcpStatus != CifsNew)),
-+			timeout); */ 
-+		/* Can not allow user interrupts- wreaks havoc with performance */
-+		if(midQ->midState & MID_REQUEST_SUBMITTED) {
-+			set_current_state(TASK_UNINTERRUPTIBLE);
-+			timeout = sleep_on_timeout(&ses->server->response_q,timeout);
-+		}
-+	}
-+    
-+	spin_lock(&GlobalMid_Lock);
-+	if (midQ->resp_buf) {
-+		spin_unlock(&GlobalMid_Lock);
-+		receive_len = be32_to_cpu(midQ->resp_buf->smb_buf_length);
-+	} else {
-+		cERROR(1,("No response buffer"));
-+		if(midQ->midState == MID_REQUEST_SUBMITTED) {
-+			if(ses->server->tcpStatus == CifsExiting)
-+				rc = -EHOSTDOWN;
-+			else {
-+				ses->server->tcpStatus = CifsNeedReconnect;
-+				midQ->midState = MID_RETRY_NEEDED;
-+			}
-+		}
-+
-+		if (rc != -EHOSTDOWN) {
-+			if(midQ->midState == MID_RETRY_NEEDED) {
-+				rc = -EAGAIN;
-+				cFYI(1,("marking request for retry"));
-+			} else {
-+				rc = -EIO;
-+			}
-+		}
-+		spin_unlock(&GlobalMid_Lock);
-+		DeleteMidQEntry(midQ);
-+		/* If not lock req, update # of requests on wire to server */
-+		if(long_op < 3) {
-+			atomic_dec(&ses->server->inFlight); 
-+			wake_up(&ses->server->request_q);
-+		}
-+		return rc;
-+	}
-+  
-+	if (receive_len > CIFS_MAX_MSGSIZE + MAX_CIFS_HDR_SIZE) {
-+		cERROR(1,
-+		       ("Frame too large received.  Length: %d  Xid: %d",
-+			receive_len, xid));
-+		rc = -EIO;
-+	} else {		/* rcvd frame is ok */
-+
-+		if (midQ->resp_buf && out_buf
-+		    && (midQ->midState == MID_RESPONSE_RECEIVED)) {
-+			memcpy(out_buf, midQ->resp_buf,
-+			       receive_len +
-+			       4 /* include 4 byte RFC1001 header */ );
-+
-+			dump_smb(out_buf, 92);
-+			/* convert the length into a more usable form */
-+			out_buf->smb_buf_length =
-+			    be32_to_cpu(out_buf->smb_buf_length);
-+			if((out_buf->smb_buf_length > 24) &&
-+			   (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))) {
-+				rc = cifs_verify_signature(out_buf, ses->mac_signing_key,midQ->sequence_number); /* BB fix BB */
-+				if(rc)
-+					cFYI(1,("Unexpected signature received from server"));
-+			}
-+
-+			if (out_buf->smb_buf_length > 12)
-+				out_buf->Flags2 = le16_to_cpu(out_buf->Flags2);
-+			if (out_buf->smb_buf_length > 28)
-+				out_buf->Pid = le16_to_cpu(out_buf->Pid);
-+			if (out_buf->smb_buf_length > 28)
-+				out_buf->PidHigh =
-+				    le16_to_cpu(out_buf->PidHigh);
-+
-+			*pbytes_returned = out_buf->smb_buf_length;
-+
-+			/* BB special case reconnect tid and reconnect uid here? */
-+			rc = map_smb_to_linux_error(out_buf);
-+
-+			/* convert ByteCount if necessary */
-+			if (receive_len >=
-+			    sizeof (struct smb_hdr) -
-+			    4 /* do not count RFC1001 header */  +
-+			    (2 * out_buf->WordCount) + 2 /* bcc */ )
-+				BCC(out_buf) = le16_to_cpu(BCC(out_buf));
-+		} else {
-+			rc = -EIO;
-+			cFYI(1,("Bad MID state? "));
-+		}
-+	}
-+cifs_no_response_exit:
-+	DeleteMidQEntry(midQ);
-+
-+	if(long_op < 3) {
-+		atomic_dec(&ses->server->inFlight); 
-+		wake_up(&ses->server->request_q);
-+	}
-+
-+	return rc;
-+
-+out_unlock:
-+	up(&ses->server->tcpSem);
-+	/* If not lock req, update # of requests on wire to server */
-+	if(long_op < 3) {
-+		atomic_dec(&ses->server->inFlight); 
-+		wake_up(&ses->server->request_q);
-+	}
-+
-+	return rc;
-+}
-diff -urN linux-2.4.29.old/fs/Config.in linux-2.4.29/fs/Config.in
---- linux-2.4.29.old/fs/Config.in	2005-03-21 19:30:22.000000000 +0100
-+++ linux-2.4.29/fs/Config.in	2005-03-21 19:36:51.000000000 +0100
-@@ -146,6 +146,10 @@
-      define_bool CONFIG_LOCKD_V4 y
-    fi
- 
-+   dep_tristate 'CIFS support (advanced network filesystem for Samba, Window and other CIFS compliant servers)' CONFIG_CIFS $CONFIG_INET
-+   dep_mbool '  CIFS statistics' CONFIG_CIFS_STATS $CONFIG_CIFS
-+   dep_mbool '  CIFS POSIX Protocol Extensions' CONFIG_CIFS_POSIX $CONFIG_CIFS
-+
-    dep_tristate 'SMB file system support (to mount Windows shares etc.)' CONFIG_SMB_FS $CONFIG_INET
-    if [ "$CONFIG_SMB_FS" != "n" ]; then
-       bool '  Use a default NLS' CONFIG_SMB_NLS_DEFAULT
-diff -urN linux-2.4.29.old/fs/Makefile linux-2.4.29/fs/Makefile
---- linux-2.4.29.old/fs/Makefile	2005-03-21 19:30:22.000000000 +0100
-+++ linux-2.4.29/fs/Makefile	2005-03-21 19:36:51.000000000 +0100
-@@ -37,6 +37,7 @@
- subdir-$(CONFIG_VFAT_FS)	+= vfat
- subdir-$(CONFIG_BFS_FS)		+= bfs
- subdir-$(CONFIG_ISO9660_FS)	+= isofs
-+subdir-$(CONFIG_CIFS)		+= cifs
- subdir-$(CONFIG_DEVFS_FS)	+= devfs
- subdir-$(CONFIG_HFSPLUS_FS)	+= hfsplus # Before hfs to find wrapped HFS+
- subdir-$(CONFIG_HFS_FS)		+= hfs
-diff -urN linux-2.4.29.old/fs/nls/Config.in linux-2.4.29/fs/nls/Config.in
---- linux-2.4.29.old/fs/nls/Config.in	2003-08-25 13:44:43.000000000 +0200
-+++ linux-2.4.29/fs/nls/Config.in	2005-03-21 19:36:51.000000000 +0100
-@@ -11,6 +11,7 @@
- 
- # msdos and Joliet want NLS
- if [ "$CONFIG_JOLIET" = "y" -o "$CONFIG_FAT_FS" != "n" \
-+	-o "$CONFIG_CIFS" != "n" \
- 	-o "$CONFIG_NTFS_FS" != "n" -o "$CONFIG_NCPFS_NLS" = "y" \
- 	-o "$CONFIG_SMB_NLS" = "y" -o "$CONFIG_JFS_FS" != "n" \
- 	-o "$CONFIG_BEFS_FS" != "n" -o "$CONFIG_HFSPLUS_FS" != "n" ]; then
diff --git a/openwrt/target/linux/generic-2.4/patches/108-optional_aout_support.patch b/openwrt/target/linux/generic-2.4/patches/108-optional_aout_support.patch
deleted file mode 100644
index 56dc1991cf..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/108-optional_aout_support.patch
+++ /dev/null
@@ -1,688 +0,0 @@
-diff -urPX nopatch linux-2.4.26/Documentation/Configure.help linux/Documentation/Configure.help
---- linux-2.4.26/Documentation/Configure.help	Sat Apr 17 02:10:25 2004
-+++ linux/Documentation/Configure.help	Sat Apr 17 02:13:54 2004
-@@ -4622,6 +4622,12 @@
-   will be called binfmt_elf.o. Saying M or N here is dangerous because
-   some crucial programs on your system might be in ELF format.
- 
-+ELF binaries with a.out format interpreters or a.out libraries
-+CONFIG_BINFMT_ELF_AOUT
-+  The kernel may support ELF executables which use an a.out format
-+  interpreter (dynamic linker) and/or a.out shared libraries, in
-+  addition to the usual ELF-ELF setups. You shouldn't need this.
-+
- Kernel support for a.out binaries
- CONFIG_BINFMT_AOUT
-   A.out (Assembler.OUTput) is a set of formats for libraries and
-@@ -4635,13 +4641,11 @@
-   warrant removing support. However its removal is a good idea if you
-   wish to ensure that absolutely none of your programs will use this
-   older executable format. If you don't know what to answer at this
--  point then answer Y. If someone told you "You need a kernel with
-+  point then answer N. If someone told you "You need a kernel with
-   QMAGIC support" then you'll have to say Y here. You may answer M to
-   compile a.out support as a module and later load the module when you
-   want to use a program or library in a.out format. The module will be
--  called binfmt_aout.o. Saying M or N here is dangerous though,
--  because some crucial programs on your system might still be in A.OUT
--  format.
-+  called binfmt_aout.o.
- 
- OSF/1 v4 readv/writev compatibility
- CONFIG_OSF4_COMPAT
-diff -urPX nopatch linux-2.4.26/arch/alpha/config.in linux/arch/alpha/config.in
---- linux-2.4.26/arch/alpha/config.in	Fri Feb 20 10:07:20 2004
-+++ linux/arch/alpha/config.in	Sat Apr 17 02:13:54 2004
-@@ -315,6 +315,9 @@
- fi
- 
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- tristate 'Kernel support for Linux/Intel ELF binaries' CONFIG_BINFMT_EM86
- source drivers/parport/Config.in
-diff -urPX nopatch linux-2.4.26/arch/alpha/defconfig linux/arch/alpha/defconfig
---- linux-2.4.26/arch/alpha/defconfig	Fri Feb 20 10:07:20 2004
-+++ linux/arch/alpha/defconfig	Sat Apr 17 02:13:54 2004
-@@ -72,6 +72,7 @@
- # CONFIG_KCORE_AOUT is not set
- # CONFIG_BINFMT_AOUT is not set
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- # CONFIG_BINFMT_MISC is not set
- # CONFIG_BINFMT_EM86 is not set
- 
-diff -urPX nopatch linux-2.4.26/arch/arm/config.in linux/arch/arm/config.in
---- linux-2.4.26/arch/arm/config.in	Fri Feb 20 10:07:20 2004
-+++ linux/arch/arm/config.in	Sat Apr 17 02:13:54 2004
-@@ -499,6 +499,9 @@
- 	 A.OUT		CONFIG_KCORE_AOUT" ELF
- tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- dep_bool 'Power Management support (experimental)' CONFIG_PM $CONFIG_EXPERIMENTAL
- dep_tristate 'RISC OS personality' CONFIG_ARTHUR $CONFIG_CPU_32
-diff -urPX nopatch linux-2.4.26/arch/arm/defconfig linux/arch/arm/defconfig
---- linux-2.4.26/arch/arm/defconfig	Fri Feb 20 10:07:21 2004
-+++ linux/arch/arm/defconfig	Sat Apr 17 02:13:54 2004
-@@ -83,8 +83,9 @@
- CONFIG_NWFPE=y
- CONFIG_KCORE_ELF=y
- # CONFIG_KCORE_AOUT is not set
--CONFIG_BINFMT_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- # CONFIG_BINFMT_MISC is not set
- # CONFIG_PM is not set
- # CONFIG_ARTHUR is not set
-diff -urPX nopatch linux-2.4.26/arch/cris/config.in linux/arch/cris/config.in
---- linux-2.4.26/arch/cris/config.in	Fri Feb 20 10:07:21 2004
-+++ linux/arch/cris/config.in	Sat Apr 17 02:13:54 2004
-@@ -31,6 +31,9 @@
- bool 'Sysctl support' CONFIG_SYSCTL
- 
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- 
- string 'Kernel command line' CONFIG_ETRAX_CMDLINE "root=/dev/mtdblock3"
- 
-diff -urPX nopatch linux-2.4.26/arch/cris/defconfig linux/arch/cris/defconfig
---- linux-2.4.26/arch/cris/defconfig	Fri Feb 20 10:07:21 2004
-+++ linux/arch/cris/defconfig	Sat Apr 17 02:13:54 2004
-@@ -18,6 +18,7 @@
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_SYSCTL is not set
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- # CONFIG_ETRAX_KGDB is not set
- # CONFIG_ETRAX_WATCHDOG is not set
- 
-diff -urPX nopatch linux-2.4.26/arch/i386/config.in linux/arch/i386/config.in
---- linux-2.4.26/arch/i386/config.in	Fri Feb 20 10:07:21 2004
-+++ linux/arch/i386/config.in	Sat Apr 17 02:13:54 2004
-@@ -327,6 +327,9 @@
- fi
- tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- bool 'Select task to kill on out of memory condition' CONFIG_OOM_KILLER
- 
-diff -urPX nopatch linux-2.4.26/arch/i386/defconfig linux/arch/i386/defconfig
---- linux-2.4.26/arch/i386/defconfig	Sat Apr 17 02:10:25 2004
-+++ linux/arch/i386/defconfig	Sat Apr 17 02:23:27 2004
-@@ -110,9 +110,10 @@
- CONFIG_SYSCTL=y
- CONFIG_KCORE_ELF=y
- # CONFIG_KCORE_AOUT is not set
--CONFIG_BINFMT_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
- CONFIG_BINFMT_ELF=y
--CONFIG_BINFMT_MISC=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
- # CONFIG_OOM_KILLER is not set
- CONFIG_PM=y
- # CONFIG_APM is not set
-diff -urPX nopatch linux-2.4.26/arch/ia64/config.in linux/arch/ia64/config.in
---- linux-2.4.26/arch/ia64/config.in	Fri Feb 20 10:07:21 2004
-+++ linux/arch/ia64/config.in	Sat Apr 17 02:13:54 2004
-@@ -124,6 +124,9 @@
- bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
- bool 'Sysctl support' CONFIG_SYSCTL
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- 
- if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then
-diff -urPX nopatch linux-2.4.26/arch/ia64/defconfig linux/arch/ia64/defconfig
---- linux-2.4.26/arch/ia64/defconfig	Fri Feb 20 10:07:21 2004
-+++ linux/arch/ia64/defconfig	Sat Apr 17 02:13:54 2004
-@@ -60,6 +60,7 @@
- # CONFIG_BSD_PROCESS_ACCT is not set
- CONFIG_SYSCTL=y
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- # CONFIG_BINFMT_MISC is not set
- CONFIG_ACPI=y
- CONFIG_ACPI_EFI=y
-diff -urPX nopatch linux-2.4.26/arch/m68k/config.in linux/arch/m68k/config.in
---- linux-2.4.26/arch/m68k/config.in	Fri Feb 20 10:07:22 2004
-+++ linux/arch/m68k/config.in	Sat Apr 17 02:13:55 2004
-@@ -99,6 +99,9 @@
- fi
- tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- 
- if [ "$CONFIG_AMIGA" = "y" ]; then
-diff -urPX nopatch linux-2.4.26/arch/m68k/defconfig linux/arch/m68k/defconfig
---- linux-2.4.26/arch/m68k/defconfig	Fri Feb 20 10:07:22 2004
-+++ linux/arch/m68k/defconfig	Sat Apr 17 02:13:55 2004
-@@ -44,8 +44,9 @@
- CONFIG_SYSCTL=y
- CONFIG_KCORE_ELF=y
- # CONFIG_KCORE_AOUT is not set
--CONFIG_BINFMT_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- # CONFIG_BINFMT_MISC is not set
- CONFIG_ZORRO=y
- # CONFIG_AMIGA_PCMCIA is not set
-diff -urPX nopatch linux-2.4.26/arch/mips/config-shared.in linux/arch/mips/config-shared.in
---- linux-2.4.26/arch/mips/config-shared.in	Fri Feb 20 10:07:22 2004
-+++ linux/arch/mips/config-shared.in	Sat Apr 17 02:13:55 2004
-@@ -944,6 +944,9 @@
- define_bool CONFIG_KCORE_AOUT n
- define_bool CONFIG_BINFMT_AOUT n
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- dep_bool 'Kernel support for Linux/MIPS 32-bit binary compatibility' CONFIG_MIPS32_COMPAT $CONFIG_MIPS64
- dep_bool 'Kernel support for o32 binaries' CONFIG_MIPS32_O32 $CONFIG_MIPS32_COMPAT
- dep_bool 'Kernel support for n32 binaries' CONFIG_MIPS32_N32 $CONFIG_MIPS32_COMPAT
-diff -urPX nopatch linux-2.4.26/arch/mips/defconfig linux/arch/mips/defconfig
---- linux-2.4.26/arch/mips/defconfig	Fri Feb 20 10:07:22 2004
-+++ linux/arch/mips/defconfig	Sat Apr 17 02:13:55 2004
-@@ -139,6 +139,7 @@
- # CONFIG_KCORE_AOUT is not set
- # CONFIG_BINFMT_AOUT is not set
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- # CONFIG_MIPS32_COMPAT is not set
- # CONFIG_MIPS32_O32 is not set
- # CONFIG_MIPS32_N32 is not set
-diff -urPX nopatch linux-2.4.26/arch/mips/kernel/irixelf.c linux/arch/mips/kernel/irixelf.c
---- linux-2.4.26/arch/mips/kernel/irixelf.c	Mon Aug 25 11:44:40 2003
-+++ linux/arch/mips/kernel/irixelf.c	Sat Apr 17 02:13:55 2004
-@@ -8,6 +8,7 @@
-  * Copyright 1993, 1994: Eric Youngdale (ericy@cais.com).
-  */
- 
-+#include <linux/config.h>
- #include <linux/module.h>
- 
- #include <linux/fs.h>
-@@ -48,7 +49,12 @@
- extern int dump_fpu (elf_fpregset_t *);
- 
- static struct linux_binfmt irix_format = {
--	NULL, THIS_MODULE, load_irix_binary, load_irix_library,
-+	NULL, THIS_MODULE, load_irix_binary,
-+#ifdef CONFIG_BINFMT_ELF_AOUT
-+	load_irix_library,
-+#else
-+	NULL,
-+#endif
- 	irix_core_dump, PAGE_SIZE
- };
- 
-@@ -787,6 +793,7 @@
- 	goto out;
- }
- 
-+#ifdef CONFIG_BINFMT_ELF_AOUT
- /* This is really simpleminded and specialized - we are loading an
-  * a.out library that is given an ELF header.
-  */
-@@ -863,6 +870,7 @@
- 	kfree(elf_phdata);
- 	return 0;
- }
-+#endif
- 
- /* Called through irix_syssgi() to map an elf image given an FD,
-  * a phdr ptr USER_PHDRP in userspace, and a count CNT telling how many
-diff -urPX nopatch linux-2.4.26/arch/mips64/defconfig linux/arch/mips64/defconfig
---- linux-2.4.26/arch/mips64/defconfig	Fri Feb 20 10:07:24 2004
-+++ linux/arch/mips64/defconfig	Sat Apr 17 02:13:55 2004
-@@ -137,6 +137,7 @@
- # CONFIG_KCORE_AOUT is not set
- # CONFIG_BINFMT_AOUT is not set
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- CONFIG_MIPS32_COMPAT=y
- CONFIG_MIPS32_O32=y
- # CONFIG_MIPS32_N32 is not set
-diff -urPX nopatch linux-2.4.26/arch/parisc/config.in linux/arch/parisc/config.in
---- linux-2.4.26/arch/parisc/config.in	Fri Feb 20 10:07:25 2004
-+++ linux/arch/parisc/config.in	Sat Apr 17 02:13:55 2004
-@@ -89,6 +89,9 @@
- bool 'Sysctl support' CONFIG_SYSCTL
- define_bool CONFIG_KCORE_ELF y
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- tristate 'Kernel support for SOM binaries' CONFIG_BINFMT_SOM
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- 
-diff -urPX nopatch linux-2.4.26/arch/parisc/defconfig linux/arch/parisc/defconfig
---- linux-2.4.26/arch/parisc/defconfig	Fri Feb 20 10:07:25 2004
-+++ linux/arch/parisc/defconfig	Sat Apr 17 02:13:55 2004
-@@ -56,6 +56,7 @@
- CONFIG_SYSCTL=y
- CONFIG_KCORE_ELF=y
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- CONFIG_BINFMT_SOM=y
- # CONFIG_BINFMT_MISC is not set
- # CONFIG_PM is not set
-diff -urPX nopatch linux-2.4.26/arch/ppc/config.in linux/arch/ppc/config.in
---- linux-2.4.26/arch/ppc/config.in	Sat Apr 17 02:10:25 2004
-+++ linux/arch/ppc/config.in	Sat Apr 17 02:13:55 2004
-@@ -384,6 +384,7 @@
- fi
- define_bool CONFIG_BINFMT_ELF y
- define_bool CONFIG_KERNEL_ELF y
-+bool 'ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- bool 'Select task to kill on out of memory condition' CONFIG_OOM_KILLER
- 
-diff -urPX nopatch linux-2.4.26/arch/ppc/defconfig linux/arch/ppc/defconfig
---- linux-2.4.26/arch/ppc/defconfig	Fri Feb 20 10:07:25 2004
-+++ linux/arch/ppc/defconfig	Sat Apr 17 02:13:55 2004
-@@ -59,7 +59,8 @@
- CONFIG_KCORE_ELF=y
- CONFIG_BINFMT_ELF=y
- CONFIG_KERNEL_ELF=y
--CONFIG_BINFMT_MISC=m
-+# CONFIG_BINFMT_ELF_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
- # CONFIG_OOM_KILLER is not set
- CONFIG_PCI_NAMES=y
- CONFIG_HOTPLUG=y
-diff -urPX nopatch linux-2.4.26/arch/ppc64/config.in linux/arch/ppc64/config.in
---- linux-2.4.26/arch/ppc64/config.in	Fri Feb 20 10:07:25 2004
-+++ linux/arch/ppc64/config.in	Sat Apr 17 02:13:55 2004
-@@ -82,6 +82,9 @@
- fi
- 
- bool 'Kernel support for 64 bit ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- 
- tristate 'Kernel support for 32 bit ELF binaries' CONFIG_BINFMT_ELF32
- 
-diff -urPX nopatch linux-2.4.26/arch/ppc64/defconfig linux/arch/ppc64/defconfig
---- linux-2.4.26/arch/ppc64/defconfig	Fri Feb 20 10:07:25 2004
-+++ linux/arch/ppc64/defconfig	Sat Apr 17 02:13:55 2004
-@@ -56,6 +56,7 @@
- # CONFIG_BSD_PROCESS_ACCT is not set
- CONFIG_KCORE_ELF=y
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- CONFIG_BINFMT_ELF32=y
- # CONFIG_BINFMT_MISC is not set
- CONFIG_PCI_NAMES=y
-diff -urPX nopatch linux-2.4.26/arch/s390/config.in linux/arch/s390/config.in
---- linux-2.4.26/arch/s390/config.in	Fri Nov 28 18:26:19 2003
-+++ linux/arch/s390/config.in	Sat Apr 17 02:13:55 2004
-@@ -58,6 +58,9 @@
- bool 'Sysctl support' CONFIG_SYSCTL
- define_bool CONFIG_KCORE_ELF y
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- bool 'Show crashed user process info' CONFIG_PROCESS_DEBUG
- bool 'Pseudo page fault support' CONFIG_PFAULT
-diff -urPX nopatch linux-2.4.26/arch/s390/defconfig linux/arch/s390/defconfig
---- linux-2.4.26/arch/s390/defconfig	Fri Feb 20 10:07:26 2004
-+++ linux/arch/s390/defconfig	Sat Apr 17 02:13:55 2004
-@@ -46,6 +46,7 @@
- CONFIG_SYSCTL=y
- CONFIG_KCORE_ELF=y
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- # CONFIG_BINFMT_MISC is not set
- # CONFIG_PROCESS_DEBUG is not set
- CONFIG_PFAULT=y
-diff -urPX nopatch linux-2.4.26/arch/s390x/config.in linux/arch/s390x/config.in
---- linux-2.4.26/arch/s390x/config.in	Fri Nov 28 18:26:19 2003
-+++ linux/arch/s390x/config.in	Sat Apr 17 02:13:55 2004
-@@ -61,6 +61,9 @@
- bool 'Sysctl support' CONFIG_SYSCTL
- define_bool CONFIG_KCORE_ELF y
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- bool 'Show crashed user process info' CONFIG_PROCESS_DEBUG
- bool 'Pseudo page fault support' CONFIG_PFAULT
-diff -urPX nopatch linux-2.4.26/arch/s390x/defconfig linux/arch/s390x/defconfig
---- linux-2.4.26/arch/s390x/defconfig	Fri Feb 20 10:07:26 2004
-+++ linux/arch/s390x/defconfig	Sat Apr 17 02:13:55 2004
-@@ -47,6 +47,7 @@
- CONFIG_SYSCTL=y
- CONFIG_KCORE_ELF=y
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- # CONFIG_BINFMT_MISC is not set
- # CONFIG_PROCESS_DEBUG is not set
- CONFIG_PFAULT=y
-diff -urPX nopatch linux-2.4.26/arch/sh/config.in linux/arch/sh/config.in
---- linux-2.4.26/arch/sh/config.in	Fri Feb 20 10:07:26 2004
-+++ linux/arch/sh/config.in	Sat Apr 17 02:13:55 2004
-@@ -283,6 +283,9 @@
- 	 A.OUT		CONFIG_KCORE_AOUT" ELF
- fi
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- 
- bool 'Select task to kill on out of memory condition' CONFIG_OOM_KILLER
-diff -urPX nopatch linux-2.4.26/arch/sh/defconfig linux/arch/sh/defconfig
---- linux-2.4.26/arch/sh/defconfig	Fri Feb 20 10:07:26 2004
-+++ linux/arch/sh/defconfig	Sat Apr 17 02:13:55 2004
-@@ -48,6 +48,7 @@
- CONFIG_KCORE_ELF=y
- # CONFIG_KCORE_AOUT is not set
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- # CONFIG_BINFMT_MISC is not set
- 
- #
-diff -urPX nopatch linux-2.4.26/arch/sparc/config.in linux/arch/sparc/config.in
---- linux-2.4.26/arch/sparc/config.in	Fri Feb 20 10:07:26 2004
-+++ linux/arch/sparc/config.in	Sat Apr 17 02:13:55 2004
-@@ -74,6 +74,9 @@
- fi
- tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- bool 'SunOS binary emulation' CONFIG_SUNOS_EMUL
- bool 'Select task to kill on out of memory condition' CONFIG_OOM_KILLER
-diff -urPX nopatch linux-2.4.26/arch/sparc/defconfig linux/arch/sparc/defconfig
---- linux-2.4.26/arch/sparc/defconfig	Sat Apr 17 02:10:25 2004
-+++ linux/arch/sparc/defconfig	Sat Apr 17 02:13:55 2004
-@@ -49,9 +49,10 @@
- # CONFIG_BSD_PROCESS_ACCT is not set
- CONFIG_SYSCTL=y
- CONFIG_KCORE_ELF=y
--CONFIG_BINFMT_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
- CONFIG_BINFMT_ELF=y
--CONFIG_BINFMT_MISC=m
-+# CONFIG_BINFMT_ELF_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
- CONFIG_SUNOS_EMUL=y
- # CONFIG_OOM_KILLER is not set
- 
-diff -urPX nopatch linux-2.4.26/arch/sparc64/config.in linux/arch/sparc64/config.in
---- linux-2.4.26/arch/sparc64/config.in	Fri Feb 20 10:07:26 2004
-+++ linux/arch/sparc64/config.in	Sat Apr 17 02:13:55 2004
-@@ -77,6 +77,9 @@
-    bool '  Kernel support for 32-bit (ie. SunOS) a.out binaries' CONFIG_BINFMT_AOUT32
- fi
- bool 'Kernel support for 64-bit ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- bool 'SunOS binary emulation' CONFIG_SUNOS_EMUL
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-diff -urPX nopatch linux-2.4.26/arch/sparc64/defconfig linux/arch/sparc64/defconfig
---- linux-2.4.26/arch/sparc64/defconfig	Sat Apr 17 02:10:26 2004
-+++ linux/arch/sparc64/defconfig	Sat Apr 17 02:13:55 2004
-@@ -56,7 +56,8 @@
- CONFIG_BINFMT_ELF32=y
- # CONFIG_BINFMT_AOUT32 is not set
- CONFIG_BINFMT_ELF=y
--CONFIG_BINFMT_MISC=m
-+# CONFIG_BINFMT_ELF_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
- # CONFIG_SUNOS_EMUL is not set
- CONFIG_SOLARIS_EMUL=m
- # CONFIG_OOM_KILLER is not set
-diff -urPX nopatch linux-2.4.26/arch/x86_64/config.in linux/arch/x86_64/config.in
---- linux-2.4.26/arch/x86_64/config.in	Sat Apr 17 02:10:26 2004
-+++ linux/arch/x86_64/config.in	Sat Apr 17 02:13:55 2004
-@@ -118,6 +118,9 @@
- fi
- #tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
- bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-+if [ "$CONFIG_BINFMT_ELF" != "n" ]; then
-+   bool '  ELF binaries with a.out format interpreters or a.out libraries' CONFIG_BINFMT_ELF_AOUT
-+fi
- tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
- 
- bool 'Power Management support' CONFIG_PM
-diff -urPX nopatch linux-2.4.26/arch/x86_64/defconfig linux/arch/x86_64/defconfig
---- linux-2.4.26/arch/x86_64/defconfig	Sat Apr 17 02:10:26 2004
-+++ linux/arch/x86_64/defconfig	Sat Apr 17 02:13:55 2004
-@@ -67,6 +67,7 @@
- CONFIG_SYSCTL=y
- CONFIG_KCORE_ELF=y
- CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_ELF_AOUT is not set
- # CONFIG_BINFMT_MISC is not set
- CONFIG_PM=y
- CONFIG_IA32_EMULATION=y
-diff -urPX nopatch linux-2.4.26/fs/binfmt_elf.c linux/fs/binfmt_elf.c
---- linux-2.4.26/fs/binfmt_elf.c	Sat Apr 17 02:10:31 2004
-+++ linux/fs/binfmt_elf.c	Sat Apr 17 02:13:55 2004
-@@ -9,6 +9,7 @@
-  * Copyright 1993, 1994: Eric Youngdale (ericy@cais.com).
-  */
- 
-+#include <linux/config.h>
- #include <linux/module.h>
- 
- #include <linux/fs.h>
-@@ -43,7 +44,9 @@
- #include <linux/elf.h>
- 
- static int load_elf_binary(struct linux_binprm * bprm, struct pt_regs * regs);
-+#ifdef CONFIG_BINFMT_ELF_AOUT
- static int load_elf_library(struct file*);
-+#endif
- static unsigned long elf_map (struct file *, unsigned long, struct elf_phdr *, int, int);
- extern int dump_fpu (struct pt_regs *, elf_fpregset_t *);
- extern void dump_thread(struct pt_regs *, struct user *);
-@@ -73,8 +76,14 @@
- #define ELF_PAGEOFFSET(_v) ((_v) & (ELF_MIN_ALIGN-1))
- #define ELF_PAGEALIGN(_v) (((_v) + ELF_MIN_ALIGN - 1) & ~(ELF_MIN_ALIGN - 1))
- 
--static struct linux_binfmt elf_format = {
--	NULL, THIS_MODULE, load_elf_binary, load_elf_library, elf_core_dump, ELF_EXEC_PAGESIZE
-+static struct linux_binfmt elf_format = {
-+	NULL, THIS_MODULE, load_elf_binary,
-+#ifdef CONFIG_BINFMT_ELF_AOUT
-+	load_elf_library,
-+#else
-+	NULL,
-+#endif
-+	elf_core_dump, ELF_EXEC_PAGESIZE
- };
- 
- #define BAD_ADDR(x)	((unsigned long)(x) > TASK_SIZE)
-@@ -369,6 +378,7 @@
- 	return error;
- }
- 
-+#ifdef CONFIG_BINFMT_ELF_AOUT
- static unsigned long load_aout_interp(struct exec * interp_ex,
- 			     struct file * interpreter)
- {
-@@ -413,6 +423,7 @@
- out:
- 	return elf_entry;
- }
-+#endif
- 
- /*
-  * These are the functions used to load ELF style executables and shared
-@@ -420,7 +431,9 @@
-  */
- 
- #define INTERPRETER_NONE 0
-+#ifdef CONFIG_BINFMT_ELF_AOUT
- #define INTERPRETER_AOUT 1
-+#endif
- #define INTERPRETER_ELF 2
- 
- 
-@@ -444,7 +457,9 @@
- 	struct elfhdr elf_ex;
- 	struct elfhdr interp_elf_ex;
-   	struct exec interp_ex;
-+#ifdef CONFIG_BINFMT_ELF_AOUT
- 	char passed_fileno[6];
-+#endif
- 	struct files_struct *files;
- 	
- 	/* Get the exec-header */
-@@ -556,6 +571,7 @@
- 
- 	/* Some simple consistency checks for the interpreter */
- 	if (elf_interpreter) {
-+#ifdef CONFIG_BINFMT_ELF_AOUT
- 		interpreter_type = INTERPRETER_ELF | INTERPRETER_AOUT;
- 
- 		/* Now figure out which format our binary is */
-@@ -563,6 +579,9 @@
- 		    (N_MAGIC(interp_ex) != ZMAGIC) &&
- 		    (N_MAGIC(interp_ex) != QMAGIC))
- 			interpreter_type = INTERPRETER_ELF;
-+#else
-+		interpreter_type = INTERPRETER_ELF;
-+#endif
- 
- 		if (memcmp(interp_elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
- 			interpreter_type &= ~INTERPRETER_ELF;
-@@ -571,6 +590,7 @@
- 		if (!interpreter_type)
- 			goto out_free_dentry;
- 
-+#ifdef CONFIG_BINFMT_ELF_AOUT
- 		/* Make sure only one type was selected */
- 		if ((interpreter_type & INTERPRETER_ELF) &&
- 		     interpreter_type != INTERPRETER_ELF) {
-@@ -578,6 +598,7 @@
- 			// printk(KERN_WARNING "ELF: Ambiguous type, using ELF\n");
- 			interpreter_type = INTERPRETER_ELF;
- 		}
-+#endif
- 		/* Verify the interpreter has a valid arch */
- 		if ((interpreter_type == INTERPRETER_ELF) &&
- 		    !elf_check_arch(&interp_elf_ex))
-@@ -590,6 +611,7 @@
- 	/* OK, we are done with that, now set up the arg stuff,
- 	   and then start this sucker up */
- 
-+#ifdef CONFIG_BINFMT_ELF_AOUT
- 	if (!bprm->sh_bang) {
- 		char * passed_p;
- 
-@@ -605,6 +627,7 @@
- 		  }
- 		}
- 	}
-+#endif
- 
- 	/* Flush all traces of the currently running executable */
- 	retval = flush_old_exec(bprm);
-@@ -721,10 +744,12 @@
- 	end_data += load_bias;
- 
- 	if (elf_interpreter) {
-+#ifdef CONFIG_BINFMT_ELF_AOUT
- 		if (interpreter_type == INTERPRETER_AOUT)
- 			elf_entry = load_aout_interp(&interp_ex,
- 						     interpreter);
- 		else
-+#endif
- 			elf_entry = load_elf_interp(&interp_elf_ex,
- 						    interpreter,
- 						    &interp_load_addr);
-@@ -743,7 +768,9 @@
- 
- 	kfree(elf_phdata);
- 
-+#ifdef CONFIG_BINFMT_ELF_AOUT
- 	if (interpreter_type != INTERPRETER_AOUT)
-+#endif
- 		sys_close(elf_exec_fileno);
- 
- 	set_binfmt(&elf_format);
-@@ -757,10 +784,14 @@
- 			&elf_ex,
- 			load_addr, load_bias,
- 			interp_load_addr,
-+#ifdef CONFIG_BINFMT_ELF_AOUT
- 			(interpreter_type == INTERPRETER_AOUT ? 0 : 1));
- 	/* N.B. passed_fileno might not be initialized? */
- 	if (interpreter_type == INTERPRETER_AOUT)
- 		current->mm->arg_start += strlen(passed_fileno) + 1;
-+#else
-+			1);
-+#endif
- 	current->mm->start_brk = current->mm->brk = elf_brk;
- 	current->mm->end_code = end_code;
- 	current->mm->start_code = start_code;
-@@ -838,9 +869,9 @@
- 	goto out;
- }
- 
-+#ifdef CONFIG_BINFMT_ELF_AOUT
- /* This is really simpleminded and specialized - we are loading an
-    a.out library that is given an ELF header. */
--
- static int load_elf_library(struct file *file)
- {
- 	struct elf_phdr *elf_phdata;
-@@ -911,6 +942,7 @@
- out:
- 	return error;
- }
-+#endif
- 
- /*
-  * Note that some platforms still use traditional core dumps and not
-diff -urPX nopatch linux-2.4.26/fs/exec.c linux/fs/exec.c
---- linux-2.4.26/fs/exec.c	Fri Feb 20 10:07:36 2004
-+++ linux/fs/exec.c	Sat Apr 17 02:13:55 2004
-@@ -109,6 +109,7 @@
-  */
- asmlinkage long sys_uselib(const char * library)
- {
-+#if defined(CONFIG_BINFMT_AOUT) || defined(CONFIG_BINFMT_ELF_AOUT)
- 	struct file * file;
- 	struct nameidata nd;
- 	int error;
-@@ -155,6 +156,9 @@
- exit:
- 	path_release(&nd);
- 	goto out;
-+#else
-+	return -ENOSYS;
-+#endif
- }
- 
- /*
diff --git a/openwrt/target/linux/generic-2.4/patches/109-ipsec_nat_traversal.patch b/openwrt/target/linux/generic-2.4/patches/109-ipsec_nat_traversal.patch
deleted file mode 100644
index fc4c29d27e..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/109-ipsec_nat_traversal.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-packaging/utils/nattpatch 2.4
---- linux/include/net/sock.h	2002/02/06 15:25:10	1.1
-+++ linux/include/net/sock.h	2002/05/22 12:14:56
-@@ -488,7 +488,13 @@
- 	} bictcp;
- };
- 
-- 	
-+#if 1
-+#define UDP_OPT_IN_SOCK 1
-+struct udp_opt {
-+	__u32 esp_in_udp;
-+};
-+#endif
-+
- /*
-  * This structure really needs to be cleaned up.
-  * Most of it is for TCP, and not used by any of
-@@ -655,6 +661,9 @@
- #if defined(CONFIG_SPX) || defined (CONFIG_SPX_MODULE)
- 		struct spx_opt		af_spx;
- #endif /* CONFIG_SPX */
-+#if 1
-+		struct udp_opt          af_udp;
-+#endif
- 
- 	} tp_pinfo;
- 
---- linux/net/Config.in.orig	Fri Feb  9 14:34:13 2001
-+++ linux/net/Config.in	Thu Feb 22 19:40:08 2001
-@@ -88,3 +88,5 @@
- endmenu
- 
-+bool 'IPSEC NAT-Traversal' CONFIG_IPSEC_NAT_TRAVERSAL
-+
- endmenu
---- linux/net/ipv4/udp.c.1	Wed Jan 28 15:57:05 2004
-+++ linux/net/ipv4/udp.c	Wed Jan 28 15:58:56 2004
-@@ -787,6 +787,9 @@
- 
- static int udp_queue_rcv_skb(struct sock * sk, struct sk_buff *skb)
- {
-+#ifdef CONFIG_IPSEC_NAT_TRAVERSAL
-+	struct udp_opt *tp =  &(sk->tp_pinfo.af_udp);
-+#endif
- 	/*
- 	 *	Charge it to the socket, dropping if the queue is full.
- 	 */
-@@ -804,6 +807,40 @@
- 	}
- #endif
- 
-+#ifdef CONFIG_IPSEC_NAT_TRAVERSAL
-+	if (tp->esp_in_udp) {
-+		/*
-+		 * Set skb->sk and xmit packet to ipsec_rcv.
-+		 *
-+		 * If ret != 0, ipsec_rcv refused the packet (not ESPinUDP),
-+		 * restore skb->sk and fall back to sock_queue_rcv_skb
-+		 */
-+		struct inet_protocol *esp = NULL;
-+
-+#if defined(CONFIG_KLIPS) && !defined(CONFIG_KLIPS_MODULE)
-+               /* optomize only when we know it is statically linked */
-+		extern struct inet_protocol esp_protocol;
-+		esp = &esp_protocol;
-+#else
-+		for (esp = (struct inet_protocol *)inet_protos[IPPROTO_ESP & (MAX_INET_PROTOS - 1)];
-+			(esp) && (esp->protocol != IPPROTO_ESP);
-+			esp = esp->next);
-+#endif
-+
-+		if (esp && esp->handler) {
-+			struct sock *sav_sk = skb->sk;
-+			skb->sk = sk;
-+			if (esp->handler(skb) == 0) {
-+				skb->sk = sav_sk;
-+				/*not sure we might count ESPinUDP as UDP...*/
-+				UDP_INC_STATS_BH(UdpInDatagrams);
-+				return 0;
-+			}
-+			skb->sk = sav_sk;
-+		}
-+	}
-+#endif
-+
- 	if (sock_queue_rcv_skb(sk,skb)<0) {
- 		UDP_INC_STATS_BH(UdpInErrors);
- 		IP_INC_STATS_BH(IpInDiscards);
-@@ -1027,13 +1064,49 @@
- 	return len;
- }
- 
-+static int udp_setsockopt(struct sock *sk, int level, int optname,
-+	char *optval, int optlen)
-+{
-+	struct udp_opt *tp = &(sk->tp_pinfo.af_udp);
-+	int val;
-+	int err = 0;
-+
-+	if (level != SOL_UDP)
-+		return ip_setsockopt(sk, level, optname, optval, optlen);
-+
-+	if(optlen<sizeof(int))
-+		return -EINVAL;
-+
-+	if (get_user(val, (int *)optval))
-+		return -EFAULT;
-+	
-+	lock_sock(sk);
-+
-+	switch(optname) {
-+#ifdef CONFIG_IPSEC_NAT_TRAVERSAL
-+#ifndef UDP_ESPINUDP
-+#define UDP_ESPINUDP 100
-+#endif
-+		case UDP_ESPINUDP:
-+			tp->esp_in_udp = val;
-+			break;
-+#endif
-+		default:
-+			err = -ENOPROTOOPT;
-+			break;
-+	}
-+
-+	release_sock(sk);
-+	return err;
-+}
-+
- struct proto udp_prot = {
-  	name:		"UDP",
- 	close:		udp_close,
- 	connect:	udp_connect,
- 	disconnect:	udp_disconnect,
- 	ioctl:		udp_ioctl,
--	setsockopt:	ip_setsockopt,
-+	setsockopt:	udp_setsockopt,
- 	getsockopt:	ip_getsockopt,
- 	sendmsg:	udp_sendmsg,
- 	recvmsg:	udp_recvmsg,
diff --git a/openwrt/target/linux/generic-2.4/patches/110-netdev_random_core.patch b/openwrt/target/linux/generic-2.4/patches/110-netdev_random_core.patch
deleted file mode 100644
index 784b65e41c..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/110-netdev_random_core.patch
+++ /dev/null
@@ -1,296 +0,0 @@
-diff -urN linux-2.4.26-pre5/Documentation/Configure.help linux-2.4.26-pre5-netdev-core/Documentation/Configure.help
---- linux-2.4.26-pre5/Documentation/Configure.help	Sat Mar 20 10:08:18 2004
-+++ linux-2.4.26-pre5-netdev-core/Documentation/Configure.help	Sun Mar 21 10:16:14 2004
-@@ -10419,6 +10419,20 @@
- 
-   If you don't know what to use this for, you don't need it.
- 
-+Allow Net Devices to contribute to /dev/random
-+CONFIG_NET_RANDOM
-+  If you say Y here, network device interrupts will contribute to the
-+  kernel entropy pool. Normally, block devices and some other devices
-+  feed the pool. Some systems, such as those that are headless or diskless,
-+  need additional entropy sources.  Some people, however, feel that network
-+  devices should not contribute to /dev/random because an external attacker
-+  could observe incoming packets in an attempt to learn the entropy pool's
-+  state.  If you say N, no network device will contribute entropy.
-+
-+  If you believe there is a chance of your network packets being observed
-+  and you doubt the security of the entropy pool's one-way hash, do not
-+  enable this.  If unsure, say N.
-+
- Ethertap network tap (OBSOLETE)
- CONFIG_ETHERTAP
-   If you say Y here (and have said Y to "Kernel/User network link
-diff -urN linux-2.4.26-pre5/drivers/net/Config.in linux-2.4.26-pre5-netdev-core/drivers/net/Config.in
---- linux-2.4.26-pre5/drivers/net/Config.in	Sat Mar 20 10:08:18 2004
-+++ linux-2.4.26-pre5-netdev-core/drivers/net/Config.in	Sun Mar 21 10:16:14 2004
-@@ -8,6 +8,7 @@
- tristate 'Bonding driver support' CONFIG_BONDING
- tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
- tristate 'Universal TUN/TAP device driver support' CONFIG_TUN
-+bool 'Allow Net Devices to contribute to /dev/random' CONFIG_NET_RANDOM
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-    tristate 'Ethertap network tap (OBSOLETE)' CONFIG_ETHERTAP
- fi
-diff -urN linux-2.4.26-pre5/include/asm-alpha/signal.h linux-2.4.26-pre5-netdev-core/include/asm-alpha/signal.h
---- linux-2.4.26-pre5/include/asm-alpha/signal.h	Sat Dec  1 18:27:14 2001
-+++ linux-2.4.26-pre5-netdev-core/include/asm-alpha/signal.h	Sun Mar 21 10:16:14 2004
-@@ -121,7 +121,14 @@
- #define SA_PROBE		SA_ONESHOT
- #define SA_SAMPLE_RANDOM	SA_RESTART
- #define SA_SHIRQ		0x40000000
-+
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM	SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM	0
- #endif
-+
-+#endif /* __KERNEL__ */
- 
- #define SIG_BLOCK          1	/* for blocking signals */
- #define SIG_UNBLOCK        2	/* for unblocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-arm/signal.h linux-2.4.26-pre5-netdev-core/include/asm-arm/signal.h
---- linux-2.4.26-pre5/include/asm-arm/signal.h	Sat Sep 13 07:57:29 2003
-+++ linux-2.4.26-pre5-netdev-core/include/asm-arm/signal.h	Sun Mar 21 10:16:14 2004
-@@ -125,7 +125,14 @@
- #define SA_PROBE		0x80000000
- #define SA_SAMPLE_RANDOM	0x10000000
- #define SA_SHIRQ		0x04000000
-+
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM	SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM	0
- #endif
-+
-+#endif /* __KERNEL__ */
- 
- #define SIG_BLOCK          0	/* for blocking signals */
- #define SIG_UNBLOCK        1	/* for unblocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-cris/signal.h linux-2.4.26-pre5-netdev-core/include/asm-cris/signal.h
---- linux-2.4.26-pre5/include/asm-cris/signal.h	Sat Dec  1 18:27:14 2001
-+++ linux-2.4.26-pre5-netdev-core/include/asm-cris/signal.h	Sun Mar 21 10:16:14 2004
-@@ -120,7 +120,14 @@
- #define SA_PROBE		SA_ONESHOT
- #define SA_SAMPLE_RANDOM	SA_RESTART
- #define SA_SHIRQ		0x04000000
-+
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM	SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM	0
- #endif
-+
-+#endif /* __KERNEL__ */
- 
- #define SIG_BLOCK          0	/* for blocking signals */
- #define SIG_UNBLOCK        1	/* for unblocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-i386/signal.h linux-2.4.26-pre5-netdev-core/include/asm-i386/signal.h
---- linux-2.4.26-pre5/include/asm-i386/signal.h	Sun Mar 21 00:00:43 2004
-+++ linux-2.4.26-pre5-netdev-core/include/asm-i386/signal.h	Sun Mar 21 10:16:14 2004
-@@ -119,7 +119,14 @@
- #define SA_PROBE		SA_ONESHOT
- #define SA_SAMPLE_RANDOM	SA_RESTART
- #define SA_SHIRQ		0x04000000
-+
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM	SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM	0
- #endif
-+
-+#endif /* __KERNEL__ */
- 
- #define SIG_BLOCK          0	/* for blocking signals */
- #define SIG_UNBLOCK        1	/* for unblocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-ia64/signal.h linux-2.4.26-pre5-netdev-core/include/asm-ia64/signal.h
---- linux-2.4.26-pre5/include/asm-ia64/signal.h	Sat Mar 20 10:08:20 2004
-+++ linux-2.4.26-pre5-netdev-core/include/asm-ia64/signal.h	Sun Mar 21 10:16:14 2004
-@@ -117,6 +117,12 @@
- #define SA_SHIRQ		0x04000000
- #define SA_PERCPU_IRQ		0x02000000
- 
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM	SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM	0
-+#endif
-+
- #endif /* __KERNEL__ */
- 
- #define SIG_BLOCK          0	/* for blocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-m68k/signal.h linux-2.4.26-pre5-netdev-core/include/asm-m68k/signal.h
---- linux-2.4.26-pre5/include/asm-m68k/signal.h	Fri Feb 20 07:38:33 2004
-+++ linux-2.4.26-pre5-netdev-core/include/asm-m68k/signal.h	Sun Mar 21 10:16:14 2004
-@@ -116,7 +116,14 @@
- #define SA_PROBE		SA_ONESHOT
- #define SA_SAMPLE_RANDOM	SA_RESTART
- #define SA_SHIRQ		0x04000000
-+
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM	SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM	0
- #endif
-+
-+#endif /* __KERNEL__ */
- 
- #define SIG_BLOCK          0	/* for blocking signals */
- #define SIG_UNBLOCK        1	/* for unblocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-mips/signal.h linux-2.4.26-pre5-netdev-core/include/asm-mips/signal.h
---- linux-2.4.26-pre5/include/asm-mips/signal.h	Sat Sep 13 07:57:31 2003
-+++ linux-2.4.26-pre5-netdev-core/include/asm-mips/signal.h	Sun Mar 21 10:16:14 2004
-@@ -111,6 +111,12 @@
- #define SA_SAMPLE_RANDOM	SA_RESTART
- #define SA_SHIRQ		0x02000000
- 
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM	SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM	0
-+#endif
-+
- #endif /* __KERNEL__ */
- 
- #define SIG_BLOCK	1	/* for blocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-mips64/signal.h linux-2.4.26-pre5-netdev-core/include/asm-mips64/signal.h
---- linux-2.4.26-pre5/include/asm-mips64/signal.h	Sat Sep 13 07:57:32 2003
-+++ linux-2.4.26-pre5-netdev-core/include/asm-mips64/signal.h	Sun Mar 21 10:16:14 2004
-@@ -119,6 +119,12 @@
- #define SA_SAMPLE_RANDOM	SA_RESTART
- #define SA_SHIRQ		0x02000000
- 
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM	SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM	0
-+#endif
-+
- #endif /* __KERNEL__ */
- 
- #define SIG_BLOCK	1	/* for blocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-parisc/signal.h linux-2.4.26-pre5-netdev-core/include/asm-parisc/signal.h
---- linux-2.4.26-pre5/include/asm-parisc/signal.h	Sun Jan 11 18:48:21 2004
-+++ linux-2.4.26-pre5-netdev-core/include/asm-parisc/signal.h	Sun Mar 21 10:16:14 2004
-@@ -100,6 +100,12 @@
- #define SA_SAMPLE_RANDOM	SA_RESTART
- #define SA_SHIRQ		0x04000000
- 
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM	SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM	0
-+#endif
-+
- #endif /* __KERNEL__ */
- 
- #define SIG_BLOCK          0	/* for blocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-ppc/signal.h linux-2.4.26-pre5-netdev-core/include/asm-ppc/signal.h
---- linux-2.4.26-pre5/include/asm-ppc/signal.h	Sat Sep 13 07:57:32 2003
-+++ linux-2.4.26-pre5-netdev-core/include/asm-ppc/signal.h	Sun Mar 21 10:16:14 2004
-@@ -111,6 +111,13 @@
- #define SA_PROBE		SA_ONESHOT
- #define SA_SAMPLE_RANDOM	SA_RESTART
- #define SA_SHIRQ		0x04000000
-+ 
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM 0
-+#endif
-+  
- #endif /* __KERNEL__ */
- 
- #define SIG_BLOCK          0	/* for blocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-s390/signal.h linux-2.4.26-pre5-netdev-core/include/asm-s390/signal.h
---- linux-2.4.26-pre5/include/asm-s390/signal.h	Fri Feb 20 07:38:34 2004
-+++ linux-2.4.26-pre5-netdev-core/include/asm-s390/signal.h	Sun Mar 21 10:16:14 2004
-@@ -129,7 +129,14 @@
- #define SA_SHIRQ                0x04000000
- #define SA_DOPATHGROUP          0x00100000
- #define SA_FORCE                0x00200000
-+
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM		SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM		0
- #endif
-+
-+#endif /* __KERNEL__ */
- 
- #define SIG_BLOCK          0    /* for blocking signals */
- #define SIG_UNBLOCK        1    /* for unblocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-s390x/signal.h linux-2.4.26-pre5-netdev-core/include/asm-s390x/signal.h
---- linux-2.4.26-pre5/include/asm-s390x/signal.h	Fri Feb 20 07:38:34 2004
-+++ linux-2.4.26-pre5-netdev-core/include/asm-s390x/signal.h	Sun Mar 21 10:16:14 2004
-@@ -129,7 +129,14 @@
- #define SA_SHIRQ                0x04000000
- #define SA_DOPATHGROUP          0x00100000
- #define SA_FORCE                0x00200000
-+
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM		SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM		0
- #endif
-+
-+#endif /* __KERNEL__ */
- 
- #define SIG_BLOCK          0    /* for blocking signals */
- #define SIG_UNBLOCK        1    /* for unblocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-sh/signal.h linux-2.4.26-pre5-netdev-core/include/asm-sh/signal.h
---- linux-2.4.26-pre5/include/asm-sh/signal.h	Sat Dec  1 18:27:13 2001
-+++ linux-2.4.26-pre5-netdev-core/include/asm-sh/signal.h	Sun Mar 21 10:16:14 2004
-@@ -107,7 +107,14 @@
- #define SA_PROBE		SA_ONESHOT
- #define SA_SAMPLE_RANDOM	SA_RESTART
- #define SA_SHIRQ		0x04000000
-+
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM	SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM	0
- #endif
-+
-+#endif /* __KERNEL__ */
- 
- #define SIG_BLOCK          0	/* for blocking signals */
- #define SIG_UNBLOCK        1	/* for unblocking signals */
-diff -urN linux-2.4.26-pre5/include/asm-sparc/signal.h linux-2.4.26-pre5-netdev-core/include/asm-sparc/signal.h
---- linux-2.4.26-pre5/include/asm-sparc/signal.h	Sat Dec  1 18:27:14 2001
-+++ linux-2.4.26-pre5-netdev-core/include/asm-sparc/signal.h	Sun Mar 21 10:16:14 2004
-@@ -176,7 +176,14 @@
- #define SA_PROBE SA_ONESHOT
- #define SA_SAMPLE_RANDOM SA_RESTART
- #define SA_STATIC_ALLOC		0x80
-+
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM	SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM	0
- #endif
-+
-+#endif /* __KERNEL__ */
- 
- /* Type of a signal handler.  */
- #ifdef __KERNEL__
-diff -urN linux-2.4.26-pre5/include/asm-sparc64/signal.h linux-2.4.26-pre5-netdev-core/include/asm-sparc64/signal.h
---- linux-2.4.26-pre5/include/asm-sparc64/signal.h	Sat Dec  1 18:27:14 2001
-+++ linux-2.4.26-pre5-netdev-core/include/asm-sparc64/signal.h	Sun Mar 21 10:16:14 2004
-@@ -192,7 +192,14 @@
- #define SA_PROBE SA_ONESHOT
- #define SA_SAMPLE_RANDOM SA_RESTART
- #define SA_STATIC_ALLOC		0x80
-+
-+#ifdef CONFIG_NET_RANDOM
-+#define SA_NET_RANDOM	SA_SAMPLE_RANDOM
-+#else
-+#define SA_NET_RANDOM	0
- #endif
-+
-+#endif /* __KERNEL__ */
- 
- /* Type of a signal handler.  */
- #ifdef __KERNEL__
diff --git a/openwrt/target/linux/generic-2.4/patches/112-bridging_performance.patch b/openwrt/target/linux/generic-2.4/patches/112-bridging_performance.patch
deleted file mode 100644
index c5d86349d4..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/112-bridging_performance.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- linux.old/net/core/dev.c	2005-07-05 16:42:36.000000000 +0200
-+++ linux.dev/net/core/dev.c	2005-07-08 19:32:46.000000000 +0200
-@@ -1289,6 +1289,19 @@
- 	local_irq_save(flags);
- 
- 	netdev_rx_stat[this_cpu].total++;
-+
-+#ifdef CONFIG_BRIDGE
-+	/* Optimisation for framebursting (allow interleaving of pkts by
-+	 * immediately processing the rx pkt instead of Qing the pkt and deferring
-+	 * the processing). Only optimise for bridging and guard against non
-+	 * TASKLET based netif_rx calls.
-+	 */
-+	if (!in_irq() && (skb->dev->br_port != NULL) && br_handle_frame_hook != NULL) {
-+		local_irq_restore(flags);
-+		return netif_receive_skb(skb);
-+	}
-+#endif		
-+	
- 	if (queue->input_pkt_queue.qlen <= netdev_max_backlog) {
- 		if (queue->input_pkt_queue.qlen) {
- 			if (queue->throttle)
diff --git a/openwrt/target/linux/generic-2.4/patches/113-even_more_gcc4_stuff.patch b/openwrt/target/linux/generic-2.4/patches/113-even_more_gcc4_stuff.patch
deleted file mode 100644
index 1b98717882..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/113-even_more_gcc4_stuff.patch
+++ /dev/null
@@ -1,367 +0,0 @@
-diff -Nur linux.old/arch/mips/kernel/mips_ksyms.c linux.dev/arch/mips/kernel/mips_ksyms.c
---- linux.old/arch/mips/kernel/mips_ksyms.c	2004-02-18 14:36:30.000000000 +0100
-+++ linux.dev/arch/mips/kernel/mips_ksyms.c	2005-10-24 14:21:53.702396250 +0200
-@@ -30,6 +30,10 @@
- #include <asm/floppy.h>
- #endif
- 
-+asmlinkage long long __ashldi3 (long long, int);
-+asmlinkage long long __ashrdi3 (long long, int);
-+asmlinkage long long __lshrdi3 (long long, int);
-+asmlinkage long long __muldi3 (long long, long long);
- extern void *__bzero(void *__s, size_t __count);
- extern long __strncpy_from_user_nocheck_asm(char *__to,
-                                             const char *__from, long __len);
-@@ -78,6 +82,13 @@
- EXPORT_SYMBOL_NOVERS(__strnlen_user_asm);
- 
- 
-+/* Compiler stuff */
-+EXPORT_SYMBOL_NOVERS(__ashldi3);
-+EXPORT_SYMBOL_NOVERS(__ashrdi3);
-+EXPORT_SYMBOL_NOVERS(__lshrdi3);
-+EXPORT_SYMBOL_NOVERS(__muldi3);
-+
-+
- /* Networking helper routines. */
- EXPORT_SYMBOL(csum_partial_copy);
- 
-diff -Nur linux.old/arch/mips/lib/Makefile linux.dev/arch/mips/lib/Makefile
---- linux.old/arch/mips/lib/Makefile	2004-02-18 14:36:30.000000000 +0100
-+++ linux.dev/arch/mips/lib/Makefile	2005-10-24 14:21:53.774400750 +0200
-@@ -9,7 +9,8 @@
- obj-y				+= csum_partial.o csum_partial_copy.o \
- 				   promlib.o rtc-std.o rtc-no.o memcpy.o \
- 				   memset.o watch.o strlen_user.o \
--				   strncpy_user.o strnlen_user.o
-+				   strncpy_user.o strnlen_user.o \
-+				   ashldi3.o ashrdi3.o lshrdi3.o muldi3.o
- 
- export-objs			:= rtc-std.o rtc-no.o
- 
-diff -Nur linux.old/arch/mips/lib/ashldi3.c linux.dev/arch/mips/lib/ashldi3.c
---- linux.old/arch/mips/lib/ashldi3.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/lib/ashldi3.c	2005-10-24 14:21:53.774400750 +0200
-@@ -0,0 +1,62 @@
-+/* ashrdi3.c extracted from gcc-2.95.2/libgcc2.c which is: */
-+/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-+
-+This file is part of GNU CC.
-+
-+GNU CC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GNU CC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GNU CC; see the file COPYING.  If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA.  */
-+
-+#define BITS_PER_UNIT 8
-+
-+typedef 	 int SItype	__attribute__ ((mode (SI)));
-+typedef unsigned int USItype	__attribute__ ((mode (SI)));
-+typedef		 int DItype	__attribute__ ((mode (DI)));
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+struct DIstruct {SItype high, low;};
-+
-+typedef union
-+{
-+  struct DIstruct s;
-+  DItype ll;
-+} DIunion;
-+
-+DItype
-+__ashldi3 (DItype u, word_type b)
-+{
-+  DIunion w;
-+  word_type bm;
-+  DIunion uu;
-+
-+  if (b == 0)
-+    return u;
-+
-+  uu.ll = u;
-+
-+  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-+  if (bm <= 0)
-+    {
-+      w.s.low = 0;
-+      w.s.high = (USItype)uu.s.low << -bm;
-+    }
-+  else
-+    {
-+      USItype carries = (USItype)uu.s.low >> bm;
-+      w.s.low = (USItype)uu.s.low << b;
-+      w.s.high = ((USItype)uu.s.high << b) | carries;
-+    }
-+
-+  return w.ll;
-+}
-diff -Nur linux.old/arch/mips/lib/ashrdi3.c linux.dev/arch/mips/lib/ashrdi3.c
---- linux.old/arch/mips/lib/ashrdi3.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/lib/ashrdi3.c	2005-10-24 14:21:53.774400750 +0200
-@@ -0,0 +1,63 @@
-+/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-+
-+This file is part of GNU CC.
-+
-+GNU CC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GNU CC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GNU CC; see the file COPYING.  If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA.  */
-+
-+#define BITS_PER_UNIT 8
-+
-+typedef 	 int SItype	__attribute__ ((mode (SI)));
-+typedef unsigned int USItype	__attribute__ ((mode (SI)));
-+typedef		 int DItype	__attribute__ ((mode (DI)));
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+struct DIstruct {SItype high, low;};
-+
-+typedef union
-+{
-+  struct DIstruct s;
-+  DItype ll;
-+} DIunion;
-+
-+DItype
-+__ashrdi3 (DItype u, word_type b)
-+{
-+  DIunion w;
-+  word_type bm;
-+  DIunion uu;
-+
-+  if (b == 0)
-+    return u;
-+
-+  uu.ll = u;
-+
-+  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-+  if (bm <= 0)
-+    {
-+      /* w.s.high = 1..1 or 0..0 */
-+      w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
-+      w.s.low = uu.s.high >> -bm;
-+    }
-+  else
-+    {
-+      USItype carries = (USItype)uu.s.high << bm;
-+      w.s.high = uu.s.high >> b;
-+      w.s.low = ((USItype)uu.s.low >> b) | carries;
-+    }
-+
-+  return w.ll;
-+}
-diff -Nur linux.old/arch/mips/lib/lshrdi3.c linux.dev/arch/mips/lib/lshrdi3.c
---- linux.old/arch/mips/lib/lshrdi3.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/lib/lshrdi3.c	2005-10-24 14:21:53.774400750 +0200
-@@ -0,0 +1,62 @@
-+/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-+
-+This file is part of GNU CC.
-+
-+GNU CC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GNU CC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GNU CC; see the file COPYING.  If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA.  */
-+
-+#define BITS_PER_UNIT 8
-+
-+typedef 	 int SItype	__attribute__ ((mode (SI)));
-+typedef unsigned int USItype	__attribute__ ((mode (SI)));
-+typedef		 int DItype	__attribute__ ((mode (DI)));
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+struct DIstruct {SItype high, low;};
-+
-+typedef union
-+{
-+  struct DIstruct s;
-+  DItype ll;
-+} DIunion;
-+
-+DItype
-+__lshrdi3 (DItype u, word_type b)
-+{
-+  DIunion w;
-+  word_type bm;
-+  DIunion uu;
-+
-+  if (b == 0)
-+    return u;
-+
-+  uu.ll = u;
-+
-+  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-+  if (bm <= 0)
-+    {
-+      w.s.high = 0;
-+      w.s.low = (USItype)uu.s.high >> -bm;
-+    }
-+  else
-+    {
-+      USItype carries = (USItype)uu.s.high << bm;
-+      w.s.high = (USItype)uu.s.high >> b;
-+      w.s.low = ((USItype)uu.s.low >> b) | carries;
-+    }
-+
-+  return w.ll;
-+}
-diff -Nur linux.old/arch/mips/lib/muldi3.c linux.dev/arch/mips/lib/muldi3.c
---- linux.old/arch/mips/lib/muldi3.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/lib/muldi3.c	2005-10-24 14:21:53.774400750 +0200
-@@ -0,0 +1,63 @@
-+/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and 
-+			   gcc-2.7.2.3/longlong.h which is: */
-+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-+
-+This file is part of GNU CC.
-+
-+GNU CC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GNU CC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GNU CC; see the file COPYING.  If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA.  */
-+
-+#define BITS_PER_UNIT 8
-+
-+#define umul_ppmm(w1, w0, u, v) \
-+  __asm__ ("multu %2,%3"						\
-+           : "=l" ((USItype)(w0)),					\
-+             "=h" ((USItype)(w1))					\
-+           : "d" ((USItype)(u)),					\
-+             "d" ((USItype)(v)))
-+
-+#define __umulsidi3(u, v) \
-+  ({DIunion __w;							\
-+    umul_ppmm (__w.s.high, __w.s.low, u, v);				\
-+    __w.ll; })
-+
-+typedef 	 int SItype	__attribute__ ((mode (SI)));
-+typedef unsigned int USItype	__attribute__ ((mode (SI)));
-+typedef		 int DItype	__attribute__ ((mode (DI)));
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+struct DIstruct {SItype high, low;};
-+
-+typedef union
-+{
-+  struct DIstruct s;
-+  DItype ll;
-+} DIunion;
-+
-+DItype
-+__muldi3 (DItype u, DItype v)
-+{
-+  DIunion w;
-+  DIunion uu, vv;
-+
-+  uu.ll = u,
-+  vv.ll = v;
-+
-+  w.ll = __umulsidi3 (uu.s.low, vv.s.low);
-+  w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
-+	       + (USItype) uu.s.high * (USItype) vv.s.low);
-+
-+  return w.ll;
-+}
-diff -Nur linux.old/fs/cifs/cifsfs.c linux.dev/fs/cifs/cifsfs.c
---- linux.old/fs/cifs/cifsfs.c	2005-10-24 13:48:27.599659000 +0200
-+++ linux.dev/fs/cifs/cifsfs.c	2005-10-24 14:25:06.526447000 +0200
-@@ -50,8 +50,6 @@
- static struct quotactl_ops cifs_quotactl_ops;
- #endif
- 
--extern struct file_system_type cifs_fs_type;
--
- int cifsFYI = 0;
- int cifsERROR = 1;
- int traceSMB = 0;
-diff -Nur linux.old/include/asm-mips/uaccess.h linux.dev/include/asm-mips/uaccess.h
---- linux.old/include/asm-mips/uaccess.h	2005-01-19 15:10:12.000000000 +0100
-+++ linux.dev/include/asm-mips/uaccess.h	2005-10-24 14:11:48.563214250 +0200
-@@ -149,7 +149,7 @@
-  * Returns zero on success, or -EFAULT on error.
-  */
- #define put_user(x,ptr)	\
--	__put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-+	__put_user_check((x),(ptr),sizeof(*(ptr)))
- 
- /*
-  * get_user: - Get a simple variable from user space.
-@@ -169,7 +169,7 @@
-  * On error, the variable @x is set to zero.
-  */
- #define get_user(x,ptr) \
--	__get_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-+	__get_user_check((x),(ptr),sizeof(*(ptr)))
- 
- /*
-  * __put_user: - Write a simple value into user space, with less checking.
-@@ -191,7 +191,7 @@
-  * Returns zero on success, or -EFAULT on error.
-  */
- #define __put_user(x,ptr) \
--	__put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-+	__put_user_nocheck((x),(ptr),sizeof(*(ptr)))
- 
- /*
-  * __get_user: - Get a simple variable from user space, with less checking.
-@@ -214,7 +214,7 @@
-  * On error, the variable @x is set to zero.
-  */
- #define __get_user(x,ptr) \
--	__get_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-+	__get_user_nocheck((x),(ptr),sizeof(*(ptr)))
- 
- struct __large_struct { unsigned long buf[100]; };
- #define __m(x) (*(struct __large_struct *)(x))
-@@ -232,7 +232,7 @@
- #define __get_user_nocheck(x,ptr,size)					\
- ({									\
- 	long __gu_err = 0;						\
--	__typeof(*(ptr)) __gu_val = 0;					\
-+	__typeof(*(ptr)) __gu_val = (__typeof(*(ptr))) 0;					\
- 	long __gu_addr;							\
- 	__gu_addr = (long) (ptr);					\
- 	switch (size) {							\
diff --git a/openwrt/target/linux/generic-2.4/patches/200-i4l.patch b/openwrt/target/linux/generic-2.4/patches/200-i4l.patch
deleted file mode 100644
index c9833e2a30..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/200-i4l.patch
+++ /dev/null
@@ -1,20247 +0,0 @@
-diff -rNu linux-2.4.29.old/Documentation/isdn/CREDITS linux-2.4.29/Documentation/isdn/CREDITS
---- linux-2.4.29.old/Documentation/isdn/CREDITS	2005-03-22 14:48:26.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/CREDITS	2005-03-22 15:06:50.246454160 +0100
-@@ -37,7 +37,7 @@
- Andreas Kool (akool@Kool.f.EUnet.de)
-   For contribution of the isdnlog/isdnrep-tool
- 
--Pedro Roque Marques (pedro_m@yahoo.com)
-+Pedro Roque Marques (roque@di.fc.ul.pt)
-   For lot of new ideas and the pcbit driver.
- 
- Eberhard Moenkeberg (emoenke@gwdg.de)
-diff -rNu linux-2.4.29.old/Documentation/isdn/HiSax.cert linux-2.4.29/Documentation/isdn/HiSax.cert
---- linux-2.4.29.old/Documentation/isdn/HiSax.cert	2005-03-22 14:48:26.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/HiSax.cert	2005-03-22 15:06:50.264451424 +0100
-@@ -68,6 +68,8 @@
- drivers/isdn/hisax/elsa.c
- drivers/isdn/hisax/diva.c
- drivers/isdn/hisax/hfc_pci.c
-+drivers/isdn/hisax/hfc_usbr.c
-+drivers/isdn/hisax/hfc_usb.c
- 
- Please send any changes, bugfixes and patches to me rather than implementing
- them directly into the HiSax sources.
-diff -rNu linux-2.4.29.old/Documentation/isdn/INTERFACE linux-2.4.29/Documentation/isdn/INTERFACE
---- linux-2.4.29.old/Documentation/isdn/INTERFACE	2005-03-22 14:48:26.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/INTERFACE	2005-03-22 15:06:50.288447776 +0100
-@@ -1,4 +1,4 @@
--$Id: INTERFACE,v 1.1.4.1 2001/11/20 14:19:33 kai Exp $
-+$Id: INTERFACE,v 1.17 2002/01/31 13:26:35 keil Exp $
- 
- Description of the Interface between Linklevel and Hardwarelevel
-   of isdn4linux:
-@@ -399,7 +399,7 @@
-                     protocol-Id is one of the constants ISDN_PROTO_L3...
-       parm.fax    = Pointer to T30_s fax struct. (fax usage only)
- 
--  ISDN_CMD_GETL2: (currently unused)
-+  ISDN_CMD_GETL3: (currently unused)
- 
-     With this command, the HL-driver is told to return the current
-     setting of the Layer-3-protocol.
-@@ -781,3 +781,22 @@
-       arg         = channel-number, locally to the driver. (starting with 0)
-       parm        = unused.
- 
-+  ISDN_STAT_ALERT:
-+
-+    With this call, the HL-driver signals the receive of an ALERTING message to the LL.
-+
-+    Parameter:
-+      driver      = driver-Id
-+      command     = ISDN_STAT_ALERT
-+      arg         = channel-number, locally to the driver. (starting with 0)
-+
-+  ISDN_STAT_PROCEED:
-+
-+    With this call, the HL-driver signals the receive of an CALL PROCEEDING message
-+    to the LL.
-+
-+    Parameter:
-+      driver      = driver-Id
-+      command     = ISDN_STAT_PROCEED
-+      arg         = channel-number, locally to the driver. (starting with 0)
-+
-diff -rNu linux-2.4.29.old/Documentation/isdn/INTERFACE.fax linux-2.4.29/Documentation/isdn/INTERFACE.fax
---- linux-2.4.29.old/Documentation/isdn/INTERFACE.fax	2005-03-22 14:48:26.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/INTERFACE.fax	2005-03-22 15:06:50.312444128 +0100
-@@ -1,4 +1,4 @@
--$Id: INTERFACE.fax,v 1.1.4.1 2001/11/20 14:19:33 kai Exp $
-+$Id: INTERFACE.fax,v 1.2 2000/08/06 09:22:50 armin Exp $
- 
- 
- Description of the fax-subinterface between linklevel and hardwarelevel of 
-diff -rNu linux-2.4.29.old/Documentation/isdn/README linux-2.4.29/Documentation/isdn/README
---- linux-2.4.29.old/Documentation/isdn/README	2005-03-22 14:48:26.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/README	2005-03-22 15:06:50.340439872 +0100
-@@ -278,6 +278,12 @@
-                                       1 = Add CPN to FCON message on
-                             Bit 2:    0 = Add CDN to RING/FCON message off
-                                       1 = Add CDN to RING/FCON message on
-+                            Bit 3:    0 = Do not signal RINGING
-+                                      1 = Signal RINGING if ALERT was received
-+                            Bit 4:    0 = Do not signal PROCEEDING
-+                                      1 = Signal PROCEEDING if CALL PROCEEDING
-+                                          was received
-+
- 
-   Last but not least a (at the moment fairly primitive) device to request
-   the line-status (/dev/isdninfo) is made available.
-diff -rNu linux-2.4.29.old/Documentation/isdn/README.HiSax linux-2.4.29/Documentation/isdn/README.HiSax
---- linux-2.4.29.old/Documentation/isdn/README.HiSax	2005-03-22 14:48:26.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/README.HiSax	2005-03-22 15:06:50.372435008 +0100
-@@ -41,10 +41,9 @@
- ELSA Quickstep 3000PCI
- ELSA PCMCIA
- ITK ix1-micro Rev.2
--Eicon Diva 2.0 ISA and PCI (S0 and U interface, no PRO version)
--Eicon Diva 2.01 ISA and PCI
--Eicon Diva 2.02 PCI
--Eicon Diva Piccola
-+Eicon.Diehl Diva 2.0 ISA and PCI (S0 and U interface, no PRO version)
-+Eicon.Diehl Diva 2.01 ISA and PCI
-+Eicon.Diehl Diva Piccola
- ASUSCOM NETWORK INC. ISDNLink 128K PC adapter (order code I-IN100-ST-D)
- Dynalink IS64PH (OEM version of ASUSCOM NETWORK INC. ISDNLink 128K adapter)
- PCBIT-DP (OEM version of ASUSCOM NETWORK INC. ISDNLink)
-@@ -53,7 +52,6 @@
- Sedlbauer Speed Star/Speed Star2 (PCMCIA)
- Sedlbauer ISDN-Controller PC/104
- USR Sportster internal TA (compatible Stollmann tina-pp V3)
--USR internal TA PCI
- ith Kommunikationstechnik GmbH MIC 16 ISA card
- Traverse Technologie NETjet PCI S0 card and NETspider U card
- Ovislink ISDN sc100-p card (NETjet driver)
-@@ -68,14 +66,14 @@
- HFC-PCI based cards
- Winbond W6692 based cards
- HFC-S+, HFC-SP/PCMCIA cards
--formula-n enternow
--Gerdes Power ISDN
-+HFC-USB ISDN TAs
- 
- Note: PCF, PCF-Pro: up to now, only the ISDN part is supported
-       PCC-8: not tested yet
-       Eicon.Diehl Diva U interface not tested
- 
- If you know other passive cards with the Siemens chipset, please let me know.
-+To use the PNP cards you need the isapnptools.
- You can combine any card, if there is no conflict between the resources
- (io, mem, irq).
- 
-@@ -91,15 +89,8 @@
- modules. It is included in the normal "make [menu]config" target at the
- kernel. Don't forget it, especially to select the right D-channel protocol.
- 
--Please note: In older versions of the HiSax driver, all PnP cards
--needed to be configured with isapnp and worked only with the HiSax
--driver used as a module.
--
--In the current version, HiSax will automatically use the in-kernel
--ISAPnP support, provided you selected it during kernel configuration
--(CONFIG_ISAPNP), if you don't give the io=, irq= command line parameters.
--
--The affected card types are: 4,7,12,14,19,27-30
-+Please note: All PnP cards need to be configured with isapnp and will work
-+only with the HiSax driver used as a module.
- 
- a) when built as a module
- -------------------------
-@@ -200,8 +191,6 @@
-    37	HFC 2BDS0 S+, SP         irq,io 
-    38	NETspider U PCI card     none
-    39	HFC 2BDS0 SP/PCMCIA      irq,io (set with cardmgr)
--   40   hotplug interface
--   41   Formula-n enter:now PCI  none
- 
- At the moment IRQ sharing is only possible with PCI cards. Please make sure
- that your IRQ is free and enabled for ISA use.
-@@ -227,13 +216,6 @@
-                    (IO 1 (BASE 0x0180))
-    modprobe hisax type=4 protocol=2 irq=10 io0=0x580 io1=0x180
- 
--   In the current version of HiSax, you can instead simply use
--
--   modprobe hisax type=4 protocol=2
--
--   if you configured your kernel for ISAPnP. Don't run isapnp in
--   this case!
--
- 6. Teles 16.3, Euro ISDN, I/O base 280 hex, IRQ 12 and
-    Teles 16.0, 1TR6, IRQ 5, Memory d0000 hex
-    modprobe hisax type=3,1 protocol=2,1 io=0x280 mem=0,0xd0000
-@@ -314,9 +296,7 @@
-    36	W6692 based PCI cards   none
-    37	HFC 2BDS0 S+,SP/PCMCIA  ONLY WORKS AS A MODULE !
-    38	NETspider U PCI card    none
--   39	HFC 2BDS0 SP/PCMCIA     ONLY WORKS AS A MODULE !
--   40   hotplug interface	ONLY WORKS AS A MODULE !
--   41   Formula-n enter:now PCI none
-+
- 
- Running the driver
- ------------------
-diff -rNu linux-2.4.29.old/Documentation/isdn/README.act2000 linux-2.4.29/Documentation/isdn/README.act2000
---- linux-2.4.29.old/Documentation/isdn/README.act2000	2005-03-22 14:48:26.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/README.act2000	2005-03-22 15:06:50.388432576 +0100
-@@ -1,4 +1,4 @@
--$Id: README.act2000,v 1.1.4.1 2001/11/20 14:19:33 kai Exp $
-+$Id: README.act2000,v 1.3 2000/08/06 09:22:51 armin Exp $
- 
- This document describes the ACT2000 driver for the
- IBM Active 2000 ISDN card.
-diff -rNu linux-2.4.29.old/Documentation/isdn/README.audio linux-2.4.29/Documentation/isdn/README.audio
---- linux-2.4.29.old/Documentation/isdn/README.audio	2005-03-22 14:48:26.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/README.audio	2005-03-22 15:06:50.404430144 +0100
-@@ -1,4 +1,4 @@
--$Id: README.audio,v 1.1.4.1 2001/11/20 14:19:33 kai Exp $
-+$Id: README.audio,v 1.8 1999/07/11 17:17:29 armin Exp $
- 
- ISDN subsystem for Linux.
-   Description of audio mode.
-diff -rNu linux-2.4.29.old/Documentation/isdn/README.eicon linux-2.4.29/Documentation/isdn/README.eicon
---- linux-2.4.29.old/Documentation/isdn/README.eicon	2005-03-22 14:48:26.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/README.eicon	2005-03-22 15:06:50.479418744 +0100
-@@ -1,4 +1,4 @@
--$Id: README.eicon,v 1.1.4.1 2001/11/20 14:19:33 kai Exp $
-+$Id: README.eicon,v 1.10 2000/08/13 12:19:15 armin Exp $
- 
- (c) 1999,2000 Armin Schindler (mac@melware.de)
- (c) 1999,2000 Cytronics & Melware (info@melware.de)
-diff -rNu linux-2.4.29.old/Documentation/isdn/README.hysdn linux-2.4.29/Documentation/isdn/README.hysdn
---- linux-2.4.29.old/Documentation/isdn/README.hysdn	2005-03-22 14:48:26.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/README.hysdn	2005-03-22 15:06:50.522412208 +0100
-@@ -1,4 +1,4 @@
--$Id: README.hysdn,v 1.1.4.1 2001/11/20 14:19:33 kai Exp $
-+$Id: README.hysdn,v 1.3.6.1 2001/02/10 14:41:19 kai Exp $
- The hysdn driver has been written by
- by Werner Cornelius (werner@isdn4linux.de or werner@titro.de) 
- for Hypercope GmbH Aachen Germany. Hypercope agreed to publish this driver
-diff -rNu linux-2.4.29.old/Documentation/isdn/README.icn linux-2.4.29/Documentation/isdn/README.icn
---- linux-2.4.29.old/Documentation/isdn/README.icn	2005-03-22 14:48:26.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/README.icn	2005-03-22 15:06:50.550407952 +0100
-@@ -1,4 +1,4 @@
--$Id: README.icn,v 1.1.4.1 2001/11/20 14:19:33 kai Exp $
-+$Id: README.icn,v 1.7 2000/08/06 09:22:51 armin Exp $
- 
- You can get the ICN-ISDN-card from:
- 
-diff -rNu linux-2.4.29.old/Documentation/isdn/README.pcbit linux-2.4.29/Documentation/isdn/README.pcbit
---- linux-2.4.29.old/Documentation/isdn/README.pcbit	2005-03-22 14:48:26.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/README.pcbit	2005-03-22 15:06:50.567405368 +0100
-@@ -37,4 +37,4 @@
- regards,
-   Pedro.
- 		
--<pedro_m@yahoo.com>
-+<roque@di.fc.ul.pt>
-diff -rNu linux-2.4.29.old/Documentation/isdn/abcext_kernel.help linux-2.4.29/Documentation/isdn/abcext_kernel.help
---- linux-2.4.29.old/Documentation/isdn/abcext_kernel.help	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/Documentation/isdn/abcext_kernel.help	2005-03-22 15:06:50.600400352 +0100
-@@ -0,0 +1,166 @@
-+ 
-+ISDN-ABC-DW Extension
-+CONFIG_ISDN_WITH_ABC
-+   These are many brand new Options and Features for the
-+   ISDN SUBSYSTEM. Including Logical Device bindings,
-+   Compression and other good stuff for Optimizing your
-+   ISDN System.
-+
-+   To Use this Extensions you MUST HAVE THE NEWEST
-+   ISDN4K-UTILS. You must have Version 3.1-Beta6 or
-+   higher. Elsewhere you can not configure this Extensions.
-+
-+   WARNING ! THIS STUF IS NOT PRODUCTION RELEASE THE
-+   FUNCTION ARE UNDER DEVELOPMENT. This ist BETA-CODE.
-+   You can use it at you Own Risk.
-+
-+   For more Information on these Extensions take a look at
-+   "linux/Documentation/isdn/dw-abc-extension-howto.txt or
-+   Online at the Web "http://www.mediatronix.de/i4l/index.html"
-+
-+   Please Report Bugs to "mario@mediatronix.de" or
-+   "delefw@isdn4linux.de"
-+
-+D-Channel-Callback with Channel in use check
-+CONFIG_ISDN_WITH_ABC_CALLB
-+   When a Interface is declared as an Callback Interface,
-+   the Interface is checking that the other Side is not
-+   Calling on the same time before the Interface is Dialing.
-+
-+   See "linux/Documentation/isdn/dw-abc-extension-howto.txt" 
-+   for more Information
-+
-+   In most case answer with "Yes" when you have Callback devices,
-+   otherwise leave it "No"
-+
-+Outgoing-EAZ-Support
-+CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+   Enables the Feature to Define an other EAZ or MSN for
-+   Outgoing calls on an Interface.
-+
-+   See "linux/Documentation/isdn/dw-abc-extension-howto.txt" 
-+   for more Information
-+
-+Least Cost Router Support
-+CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+   This is the final Kernel Code for configuring an Least
-+   Cost Router Softwarebased. The other Job is to do the
-+   action in ISDNLOG. You need the ISDNLOG to use this 
-+   function. Currently the ISDNLOG have not the Support for
-+   this Option.
-+   So in most situations let the Option off.
-+
-+TCP keepalive detect and response
-+CONFIG_ISDN_WITH_ABC_IPV4_TCP_KEEPALIVE
-+   This Option works only with the TCP/IP V4. It enables
-+   the Function that ISDN Devices are Answering TCP_KEEPALIVE Pakets
-+   localy. So that TCP KEEPALIVE Pakets not longer takes the Line
-+   open.
-+
-+Drop frames Sourceadresse is not Interfaceadress
-+CONFIG_ISDN_WITH_ABC_IPV4_DYNADDR
-+   This Option works only with the TCP/IP V4. It will allow only
-+   the Transmitt of Pakets where the Sourceadresse is the Interface
-+   adress. It is usefull when you have Lines with Dynamic IP.
-+
-+   See "linux/Documentation/isdn/dw-abc-extension-howto.txt" 
-+   for more Information
-+
-+Receive do not reset the Hanguptimer
-+CONFIG_ISDN_WITH_ABC_RCV_NO_HUPTIMER
-+   When you activate this option than the reiceive of pakets do
-+   not reset the Hanguptimer. It is very usefull because if the
-+   Paket vor your Network your Network generate an Response and
-+   the Transmit is reseting the HUPTIMER. But when the Paket is
-+   Rejected at your firewall your network generate no Response
-+   and no Sendtraffic is generated. So in this case there is no 
-+   need to Reset the Huptimer because you have only received Data.
-+   With that option only Transmitted Data/Pakets will reset the
-+   HUPTIMER.
-+
-+Support of (device-channel) and Binding Groups
-+CONFIG_ISDN_WITH_ABC_ICALL_BIND
-+   This Option enables the Feature to Bind logical ISDN Interfaces
-+   to an prefered ISDN Card or ISDN Card plus Channel. So you have
-+   the Chance to keep Channels exclusively for one (or more) 
-+   Connection. Very usefull when you have more channels and Use 
-+   Calling Line Identification, because you can organize that your
-+   call is going out over the Line with the right EAZ for the CLI.
-+
-+Skip channel if used external (Dial Only)
-+CONFIG_ISDN_WITH_ABC_CH_EXTINUSE
-+   When you have more than One ISDN Card in your System and you
-+   will Dialout with an Interface you can become the Situation
-+   that an External Device such a Telephone or Fax is Using the
-+   B-Channels. Normaly ISDN4Linux does not detect this Situation
-+   and dial everytime of the "External Busy" line out. With this
-+   Option Enabled the I4L will detect that he can not dialout on
-+   This Card and dial over the next Card out.
-+
-+   See "linux/Documentation/isdn/dw-abc-extension-howto.txt" 
-+   for more Information
-+
-+Interface autodisable if Config error
-+CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+   This Option will detect an Device which generate Telephone
-+   Cost but does not Function correctly because there are
-+   Configerrors on one of the Site. In this Situation the
-+   Interface will be marked as Unsuably for some time to do
-+   not call every time this Site.
-+
-+   See "linux/Documentation/isdn/dw-abc-extension-howto.txt" 
-+   for more Information
-+
-+UDP-Info-Support
-+CONFIG_ISDN_WITH_ABC_UDP_CHECK
-+   This is the Mainoption to Enable or Disable the UDP
-+   Info Support. An Option to Controll ISDN-Interfaces
-+   Remotely. For this very Complex thing take a look at
-+
-+   "linux/Documentation/isdn/dw-abc-extension-howto.txt" 
-+   for more Information.
-+
-+UDP Hangup Support
-+CONFIG_ISDN_WITH_ABC_UDP_CHECK_HANGUP
-+
-+   Sorry no more Information!
-+
-+   See "linux/Documentation/isdn/dw-abc-extension-howto.txt" 
-+   for more Information
-+   
-+UDP Dial Support
-+CONFIG_ISDN_WITH_ABC_UDP_CHECK_DIAL
-+
-+   Sorry no more Information!
-+
-+   See "linux/Documentation/isdn/dw-abc-extension-howto.txt" 
-+   for more Information
-+   
-+Limit on the line frames to two
-+CONFIG_ISDN_WITH_ABC_FRAME_LIMIT
-+
-+   This Option enables support for sending only 2 Pakets on
-+   the Fly to the ISDN Driver. It is very usefull when you
-+   will use the new RAW-IP Compression. Because of sending
-+   Only 2 Pakets on the Fly makes the risk of overflowing
-+   the ISDN Driver very smaller.
-+
-+   See "linux/Documentation/isdn/dw-abc-extension-howto.txt" 
-+   for more Information
-+
-+Compression with RAWIP and X75I
-+CONFIG_ISDN_WITH_ABC_RAWIPCOMPRESS
-+
-+   With this Option you have the ability to make Datacompression
-+   on RAW-IP Lines. It is function on HDLC and X75I Connection,
-+   but the Prefered L2-Protocol for Compression is X75I because
-+   the HDLC Protocol have no Errorcorrection.
-+
-+   To Use this Option YOU MUST HAVE ENABLED THE OPTION:
-+   Support synchronous PPP
-+   and must load after loading the main isdndrivers the
-+   Modul "isdn_bsdcomp".
-+
-+   See "linux/Documentation/isdn/dw-abc-extension-howto.txt" 
-+   for more Information
-+
-diff -rNu linux-2.4.29.old/drivers/isdn/Config.in linux-2.4.29/drivers/isdn/Config.in
---- linux-2.4.29.old/drivers/isdn/Config.in	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/Config.in	2005-03-22 15:06:44.259364336 +0100
-@@ -4,11 +4,9 @@
- 
- # only included if CONFIG_ISDN != n
- 
--define_bool CONFIG_ISDN_BOOL y
- if [ "$CONFIG_INET" != "n" ]; then
-    bool '  Support synchronous PPP' CONFIG_ISDN_PPP
-    if [ "$CONFIG_ISDN_PPP" != "n" ]; then
--      dep_bool     '    PPP filtering for ISDN' CONFIG_IPPP_FILTER $CONFIG_FILTER
-       bool         '    Use VJ-compression with synchronous PPP' CONFIG_ISDN_PPP_VJ
-       bool         '    Support generic MP (RFC 1717)' CONFIG_ISDN_MPP
-       dep_tristate '    Support BSD compression' CONFIG_ISDN_PPP_BSDCOMP $CONFIG_ISDN
-@@ -23,6 +21,30 @@
- fi
- 
- mainmenu_option next_comment
-+comment 'ISDN abc-dw-extension'
-+bool 'Enable isdn-abc-dw-extension' CONFIG_ISDN_WITH_ABC
-+if [ "$CONFIG_ISDN_WITH_ABC" != "n" ]; then
-+	bool '  Use D-Channel-Callback with Channel in use check' CONFIG_ISDN_WITH_ABC_CALLB
-+	bool '  Enable Outgoing-EAZ-Support' CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+	bool '  Enable LCR-Support (need isdnlog)' CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+	bool '  RX dont reset hanguptimeout' CONFIG_ISDN_WITH_ABC_RCV_NO_HUPTIMER
-+	if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
-+		bool '  Enable UDP-Info-Support' CONFIG_ISDN_WITH_ABC_UDP_CHECK
-+		if [ "$CONFIG_ISDN_WITH_ABC_UDP_CHECK" != "n" ]; then
-+			bool '    Enable Hangup-Support with UDP-INFO' CONFIG_ISDN_WITH_ABC_UDP_CHECK_HANGUP
-+			bool '    Enable Dial-Support with UDP-INFO' CONFIG_ISDN_WITH_ABC_UDP_CHECK_DIAL
-+		fi
-+	fi
-+
-+	bool '  Skip channel if used external (dial only)' CONFIG_ISDN_WITH_ABC_CH_EXTINUSE
-+	bool '  Support interface-auto-disable if config-error' CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+	if [ "$CONFIG_ISDN_PPP" != "n" ]; then
-+		bool '  Enable Compression with rawip and x75i' CONFIG_ISDN_WITH_ABC_RAWIPCOMPRESS
-+	fi
-+fi
-+endmenu
-+
-+mainmenu_option next_comment
- comment 'ISDN feature submodules'
-    dep_tristate 'isdnloop support' CONFIG_ISDN_DRV_LOOP $CONFIG_ISDN
-    dep_tristate 'Support isdn diversion services' CONFIG_ISDN_DIVERSION $CONFIG_ISDN
-@@ -34,7 +56,6 @@
- comment 'Passive ISDN cards'
- dep_tristate 'HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN
- if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
--   define_bool CONFIG_ISDN_HISAX y
-    comment '  D-channel protocol features'
-    bool '  HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO
-    if [ "$CONFIG_HISAX_EURO" != "n" ]; then
-@@ -45,31 +66,28 @@
-    fi
-    bool '  HiSax Support for german 1TR6' CONFIG_HISAX_1TR6
-    bool '  HiSax Support for US NI1' CONFIG_HISAX_NI1
--   int  '  Maximum number of cards supported by HiSax' CONFIG_HISAX_MAX_CARDS 8
-    comment '  HiSax supported cards'
--   if [ "$CONFIG_ISA" != "n" ]; then
--      bool '  Teles 16.0/8.0' CONFIG_HISAX_16_0
--      bool '  Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
--      bool '  AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
--      bool '  ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
--      bool '  ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM
--      bool '  TELEINT cards' CONFIG_HISAX_TELEINT
--      bool '  HFC-S based cards' CONFIG_HISAX_HFCS
--      bool '  USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
--      bool '  MIC card' CONFIG_HISAX_MIC
--      bool '  Siemens I-Surf card' CONFIG_HISAX_ISURF
--      bool '  HST Saphir card' CONFIG_HISAX_HSTSAPHIR
--   fi
-+   bool '  Teles 16.0/8.0' CONFIG_HISAX_16_0
-+   bool '  Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
-    bool '  Teles PCI' CONFIG_HISAX_TELESPCI 
-    bool '  Teles S0Box' CONFIG_HISAX_S0BOX 
-+   bool '  AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
-    bool '  AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
-    bool '  AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
-    bool '  Elsa cards' CONFIG_HISAX_ELSA
-+   bool '  ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
-    bool '  Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
-+   bool '  ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM
-+   bool '  TELEINT cards' CONFIG_HISAX_TELEINT
-+   bool '  HFC-S based cards' CONFIG_HISAX_HFCS
-    bool '  Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
-+   bool '  USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
-+   bool '  MIC card' CONFIG_HISAX_MIC
-    bool '  NETjet card' CONFIG_HISAX_NETJET
-    bool '  NETspider U card' CONFIG_HISAX_NETJET_U
-    bool '  Niccy PnP/PCI card' CONFIG_HISAX_NICCY
-+   bool '  Siemens I-Surf card' CONFIG_HISAX_ISURF
-+   bool '  HST Saphir card' CONFIG_HISAX_HSTSAPHIR
-    bool '  Telekom A4T card' CONFIG_HISAX_BKM_A4T
-    bool '  Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
-    bool '  Gazel cards' CONFIG_HISAX_GAZEL
-@@ -78,20 +96,27 @@
-    bool '  HFC-S+, HFC-SP, HFC-PCMCIA cards' CONFIG_HISAX_HFC_SX
-    if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
- #      bool '  TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
--      bool '  Formula-n enter:now PCI card' CONFIG_HISAX_ENTERNOW_PCI
-       if [ "$ARCH" = "sparc" -o "$ARCH" = "sparc64" ]; then
- 	 bool '  Am7930' CONFIG_HISAX_AMD7930
-       fi
-    fi
-    bool '  HiSax debugging' CONFIG_HISAX_DEBUG
- 
--   dep_tristate 'Sedlbauer PCMCIA cards'                              CONFIG_HISAX_SEDLBAUER_CS  $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
--   dep_tristate 'ELSA PCMCIA MicroLink cards'                         CONFIG_HISAX_ELSA_CS       $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
--   dep_tristate 'AVM A1 PCMCIA cards'                                 CONFIG_HISAX_AVM_A1_CS     $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA $CONFIG_HISAX_AVM_A1_PCMCIA
--   dep_tristate 'ST5481 USB ISDN modem (EXPERIMENTAL)'                CONFIG_HISAX_ST5481        $CONFIG_ISDN_DRV_HISAX    $CONFIG_EXPERIMENTAL
--   dep_tristate 'AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)' CONFIG_HISAX_FRITZ_PCIPNP  $CONFIG_ISDN_DRV_HISAX                $CONFIG_EXPERIMENTAL
--   dep_tristate 'Auerswald devices ISDN support'                      CONFIG_USB_AUERISDN        $CONFIG_ISDN_DRV_HISAX
-+   dep_tristate 'Sedlbauer PCMCIA cards' CONFIG_HISAX_SEDLBAUER_CS $CONFIG_PCMCIA
-+   dep_tristate 'ELSA PCMCIA MicroLink cards' CONFIG_HISAX_ELSA_CS $CONFIG_PCMCIA
-+   dep_tristate 'Colognechip HFC-USB support' CONFIG_HISAX_HFC_USB_CS $CONFIG_HISAX $CONFIG_USB
-+   dep_tristate 'ST5481 USB ISDN modem (EXPERIMENTAL)' CONFIG_HISAX_ST5481 $CONFIG_HISAX $CONFIG_USB $CONFIG_EXPERIMENTAL
-+   dep_tristate 'Fritz!PCIv2 support (EXPERIMENTAL)' CONFIG_HISAX_FRITZ_PCIPNP $CONFIG_HISAX $CONFIG_EXPERIMENTAL
- 
-+   if [ "$CONFIG_HISAX_SEDLBAUER_CS" != "n" ]; then
-+      define_bool CONFIG_HISAX_SEDLBAUER y
-+   fi
-+   if [ "$CONFIG_HISAX_ELSA_CS" != "n" ]; then
-+      define_bool CONFIG_HISAX_ELSA y
-+   fi
-+   if [ "$CONFIG_HISAX_HFC_USB_CS" != "n" ]; then
-+      define_bool CONFIG_HISAX_HFC_USB y
-+   fi
- fi
- endmenu
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/Makefile linux-2.4.29/drivers/isdn/Makefile
---- linux-2.4.29.old/drivers/isdn/Makefile	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/Makefile	2005-03-22 15:06:44.277361600 +0100
-@@ -2,7 +2,7 @@
- 
- # The target object and module list name.
- 
--O_TARGET	:= vmlinux-obj.o
-+O_TARGET	:= isdn.a
- 
- # Objects that export symbols.
- 
-@@ -32,9 +32,9 @@
- 
- # Object files in subdirectories
- 
--mod-subdirs				:= avmb1 eicon hisax
-+mod-subdirs				:= avmb1 eicon
- subdir-$(CONFIG_ISDN_DIVERSION)		+= divert
--subdir-$(CONFIG_ISDN_HISAX)		+= hisax
-+subdir-$(CONFIG_ISDN_DRV_HISAX)		+= hisax
- subdir-$(CONFIG_ISDN_DRV_ICN)		+= icn
- subdir-$(CONFIG_ISDN_DRV_PCBIT)		+= pcbit
- subdir-$(CONFIG_ISDN_DRV_SC)		+= sc
-diff -rNu linux-2.4.29.old/drivers/isdn/act2000/act2000.h linux-2.4.29/drivers/isdn/act2000/act2000.h
---- linux-2.4.29.old/drivers/isdn/act2000/act2000.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/act2000/act2000.h	2005-03-22 15:06:44.103388048 +0100
-@@ -1,4 +1,4 @@
--/* $Id: act2000.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id$
-  *
-  * ISDN lowlevel-module for the IBM ISDN-S0 Active 2000.
-  *
-@@ -178,19 +178,19 @@
-         char regname[35];                /* Name used for request_region     */
- } act2000_card;
- 
--static inline void act2000_schedule_tx(act2000_card *card)
-+extern __inline__ void act2000_schedule_tx(act2000_card *card)
- {
-         queue_task(&card->snd_tq, &tq_immediate);
-         mark_bh(IMMEDIATE_BH);
- }
- 
--static inline void act2000_schedule_rx(act2000_card *card)
-+extern __inline__ void act2000_schedule_rx(act2000_card *card)
- {
-         queue_task(&card->rcv_tq, &tq_immediate);
-         mark_bh(IMMEDIATE_BH);
- }
- 
--static inline void act2000_schedule_poll(act2000_card *card)
-+extern __inline__ void act2000_schedule_poll(act2000_card *card)
- {
-         queue_task(&card->poll_tq, &tq_immediate);
-         mark_bh(IMMEDIATE_BH);
-diff -rNu linux-2.4.29.old/drivers/isdn/act2000/act2000_isa.c linux-2.4.29/drivers/isdn/act2000/act2000_isa.c
---- linux-2.4.29.old/drivers/isdn/act2000/act2000_isa.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/act2000/act2000_isa.c	2005-03-22 15:06:44.135383184 +0100
-@@ -1,4 +1,4 @@
--/* $Id: act2000_isa.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id$
-  *
-  * ISDN lowlevel-module for the IBM ISDN-S0 Active 2000 (ISA-Version).
-  *
-@@ -178,8 +178,7 @@
-                 card->flags &= ~ACT2000_FLAGS_PVALID;
-         }
-         if (!check_region(portbase, ISA_REGION)) {
--                if (request_region(portbase, ACT2000_PORTLEN, card->regname) == NULL)
--			return -EIO;
-+                request_region(portbase, ACT2000_PORTLEN, card->regname);
-                 card->port = portbase;
-                 card->flags |= ACT2000_FLAGS_PVALID;
-                 return 0;
-@@ -341,6 +340,9 @@
- 		while (skb->len) {
- 			if (act2000_isa_writeb(card, *(skb->data))) {
- 				/* Fifo is full, but more data to send */
-+#if 0
-+				printk(KERN_DEBUG "act2000_isa_send: %d bytes\n", l);
-+#endif
- 				test_and_clear_bit(ACT2000_LOCK_TX, (void *) &card->ilock);
- 				/* Schedule myself */
- 				act2000_schedule_tx(card);
-@@ -363,6 +365,9 @@
- 		} else
- 			dev_kfree_skb(skb);
- 		card->sbuf = NULL;
-+#if 0
-+		printk(KERN_DEBUG "act2000_isa_send: %d bytes\n", l);
-+#endif
- 	}
- }
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/act2000/act2000_isa.h linux-2.4.29/drivers/isdn/act2000/act2000_isa.h
---- linux-2.4.29.old/drivers/isdn/act2000/act2000_isa.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/act2000/act2000_isa.h	2005-03-22 15:06:44.152380600 +0100
-@@ -1,4 +1,4 @@
--/* $Id: act2000_isa.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id$
-  *
-  * ISDN lowlevel-module for the IBM ISDN-S0 Active 2000 (ISA-Version).
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/act2000/capi.c linux-2.4.29/drivers/isdn/act2000/capi.c
---- linux-2.4.29.old/drivers/isdn/act2000/capi.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/act2000/capi.c	2005-03-22 15:06:44.172377560 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capi.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id$
-  *
-  * ISDN lowlevel-module for the IBM ISDN-S0 Active 2000.
-  * CAPI encoder/decoder
-@@ -76,6 +76,10 @@
- 	{{ 0x84, 0x03}, "DISCONNECT_B3_RESP"},
- 	{{ 0x86, 0x03}, "DATA_B3_RESP"},
- 	{{ 0xff, 0x03}, "MANUFACTURER_RESP"},
-+#if 0
-+/* CAPI 2.0 */
-+	{{ 0x05, 0x80}, "LISTEN_REQ (CAPI 2.0)"},
-+#endif
- #endif
- 	{{ 0x00, 0x00}, NULL},
- };
-diff -rNu linux-2.4.29.old/drivers/isdn/act2000/capi.h linux-2.4.29/drivers/isdn/act2000/capi.h
---- linux-2.4.29.old/drivers/isdn/act2000/capi.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/act2000/capi.h	2005-03-22 15:06:44.187375280 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capi.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id$
-  *
-  * ISDN lowlevel-module for the IBM ISDN-S0 Active 2000.
-  *
-@@ -294,6 +294,19 @@
- 			__u16 plci;
- 			__u16 info;
- 		} select_b3_protocol_conf;
-+#if 0
-+		struct listen_req {
-+			__u32 controller;
-+			__u32 infomask;  
-+			__u32 cipmask;
-+			__u32 cipmask2;
-+			__u16 dummy; /* 2 Length-bytes of 2 Structs MUST always be 0!!! */
-+		} listen_req;
-+		struct listen_conf {
-+			__u32  controller;
-+			__u16 info;
-+		} listen_conf;
-+#else
- 		struct listen_req {
- 			__u8  controller;
- 			__u32 infomask __attribute__ ((packed));  
-@@ -304,6 +317,7 @@
- 			__u8  controller;
- 			__u16 info __attribute__ ((packed));
- 		} listen_conf;
-+#endif
- 		struct data_b3_req {
- 			__u16 fakencci;
- 			__u16 datalen;
-@@ -330,7 +344,7 @@
- 	} msg;
- } actcapi_msg;
- 
--static inline unsigned short
-+extern __inline__ unsigned short
- actcapi_nextsmsg(act2000_card *card)
- {
- 	unsigned long flags;
-diff -rNu linux-2.4.29.old/drivers/isdn/act2000/module.c linux-2.4.29/drivers/isdn/act2000/module.c
---- linux-2.4.29.old/drivers/isdn/act2000/module.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/act2000/module.c	2005-03-22 15:06:44.202373000 +0100
-@@ -1,4 +1,4 @@
--/* $Id: module.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id$
-  *
-  * ISDN lowlevel-module for the IBM ISDN-S0 Active 2000.
-  *
-@@ -630,6 +630,10 @@
-         card->interface.features =
- 		ISDN_FEATURE_L2_X75I |
- 		ISDN_FEATURE_L2_HDLC |
-+#if 0
-+/* Not yet! New Firmware is on the way ... */
-+		ISDN_FEATURE_L2_TRANS |
-+#endif
- 		ISDN_FEATURE_L3_TRANS |
- 		ISDN_FEATURE_P_UNKNOWN;
-         card->interface.hl_hdrlen = 20;
-@@ -843,6 +847,39 @@
-         }
-         printk(KERN_INFO "%s unloaded\n", DRIVERNAME);
- }
-+#if 0
-+#ifndef MODULE
-+void
-+act2000_setup(char *str, int *ints)
-+{
-+        int i, j, argc, port, irq, bus;
-+	
-+        argc = ints[0];
-+        i = 1;
-+        if (argc)
-+                while (argc) {
-+                        port = irq = -1;
-+			bus = 0;
-+                        if (argc) {
-+                                bus = ints[i];
-+                                i++;
-+                                argc--;
-+                        }
-+                        if (argc) {
-+                                port = ints[i];
-+                                i++;
-+                                argc--;
-+                        }
-+                        if (argc) {
-+                                irq = ints[i];
-+                                i++;
-+                                argc--;
-+                        }
-+			act2000_addcard(bus, port, irq, act_id);
-+		}
-+}
-+#endif
-+#endif
- 
- module_init(act2000_init);
- module_exit(act2000_exit);
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/avm_cs.c linux-2.4.29/drivers/isdn/avmb1/avm_cs.c
---- linux-2.4.29.old/drivers/isdn/avmb1/avm_cs.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/avm_cs.c	2005-03-22 15:06:44.696297912 +0100
-@@ -1,4 +1,4 @@
--/* $Id: avm_cs.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: avm_cs.c,v 1.6 2001/09/24 13:22:44 kai Exp $
-  *
-  * A PCMCIA client driver for AVM B1/M1/M2
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/avmcard.h linux-2.4.29/drivers/isdn/avmb1/avmcard.h
---- linux-2.4.29.old/drivers/isdn/avmb1/avmcard.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/avmcard.h	2005-03-22 15:06:44.711295632 +0100
-@@ -1,4 +1,4 @@
--/* $Id: avmcard.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: avmcard.h,v 1.12 2001/09/24 13:22:44 kai Exp $
-  *
-  * Copyright 1999 by Carsten Paeth <calle@calle.de>
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/b1.c linux-2.4.29/drivers/isdn/avmb1/b1.c
---- linux-2.4.29.old/drivers/isdn/avmb1/b1.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/b1.c	2005-03-22 15:06:44.733292288 +0100
-@@ -1,4 +1,4 @@
--/* $Id: b1.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: b1.c,v 1.26 2001/09/24 13:22:44 kai Exp $
-  * 
-  * Common module for AVM B1 cards.
-  * 
-@@ -20,6 +20,7 @@
- #include <linux/kernelcapi.h>
- #include <asm/io.h>
- #include <linux/init.h>
-+#include <linux/isdn_compat.h>
- #include <asm/uaccess.h>
- #include <linux/netdevice.h>
- #include "capilli.h"
-@@ -27,7 +28,7 @@
- #include "capicmd.h"
- #include "capiutil.h"
- 
--static char *revision = "$Revision: 1.1.4.1 $";
-+static char *revision = "$Revision: 1.26 $";
- 
- /* ------------------------------------------------------------- */
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/b1dma.c linux-2.4.29/drivers/isdn/avmb1/b1dma.c
---- linux-2.4.29.old/drivers/isdn/avmb1/b1dma.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/b1dma.c	2005-03-22 15:06:44.750289704 +0100
-@@ -1,4 +1,4 @@
--/* $Id: b1dma.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: b1dma.c,v 1.18 2001/09/24 13:22:44 kai Exp $
-  * 
-  * Common module for AVM B1 cards that support dma with AMCC
-  * 
-@@ -21,6 +21,7 @@
- #include <linux/kernelcapi.h>
- #include <asm/io.h>
- #include <linux/init.h>
-+#include <linux/isdn_compat.h>
- #include <asm/uaccess.h>
- #include <linux/netdevice.h>
- #include "capilli.h"
-@@ -28,7 +29,11 @@
- #include "capicmd.h"
- #include "capiutil.h"
- 
--static char *revision = "$Revision: 1.1.4.1 $";
-+#if BITS_PER_LONG != 32
-+#error FIXME: driver requires 32-bit platform
-+#endif
-+
-+static char *revision = "$Revision: 1.18 $";
- 
- /* ------------------------------------------------------------- */
- 
-@@ -851,7 +856,7 @@
- 	__u8 flag;
- 	int len = 0;
- 	char *s;
--	u_long txaddr, txlen, rxaddr, rxlen, csr;
-+	__u32 txaddr, txlen, rxaddr, rxlen, csr;
- 
- 	len += sprintf(page+len, "%-16s %s\n", "name", card->name);
- 	len += sprintf(page+len, "%-16s 0x%x\n", "io", card->port);
-@@ -907,12 +912,12 @@
- 	save_flags(flags);
- 	cli();
- 
--	txaddr = (u_long)phys_to_virt(b1dmainmeml(card->mbase+0x2c));
--	txaddr -= (u_long)card->dma->sendbuf;
-+	txaddr = (__u32)phys_to_virt(b1dmainmeml(card->mbase+0x2c));
-+	txaddr -= (__u32)card->dma->sendbuf;
- 	txlen  = b1dmainmeml(card->mbase+0x30);
- 
--	rxaddr = (u_long)phys_to_virt(b1dmainmeml(card->mbase+0x24));
--	rxaddr -= (u_long)card->dma->recvbuf;
-+	rxaddr = (__u32)phys_to_virt(b1dmainmeml(card->mbase+0x24));
-+	rxaddr -= (__u32)card->dma->recvbuf;
- 	rxlen  = b1dmainmeml(card->mbase+0x28);
- 
- 	csr  = b1dmainmeml(card->mbase+AMCC_INTCSR);
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/b1isa.c linux-2.4.29/drivers/isdn/avmb1/b1isa.c
---- linux-2.4.29.old/drivers/isdn/avmb1/b1isa.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/b1isa.c	2005-03-22 15:06:44.766287272 +0100
-@@ -1,4 +1,4 @@
--/* $Id: b1isa.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: b1isa.c,v 1.14 2001/09/24 13:22:44 kai Exp $
-  * 
-  * Module for AVM B1 ISA-card.
-  * 
-@@ -19,12 +19,13 @@
- #include <linux/capi.h>
- #include <linux/init.h>
- #include <asm/io.h>
-+#include <linux/isdn_compat.h>
- #include "capicmd.h"
- #include "capiutil.h"
- #include "capilli.h"
- #include "avmcard.h"
- 
--static char *revision = "$Revision: 1.1.4.1 $";
-+static char *revision = "$Revision: 1.14 $";
- 
- /* ------------------------------------------------------------- */
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/b1pci.c linux-2.4.29/drivers/isdn/avmb1/b1pci.c
---- linux-2.4.29.old/drivers/isdn/avmb1/b1pci.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/b1pci.c	2005-03-22 15:06:44.781284992 +0100
-@@ -1,4 +1,4 @@
--/* $Id: b1pci.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: b1pci.c,v 1.40 2001/09/24 13:22:44 kai Exp $
-  * 
-  * Module for AVM B1 PCI-card.
-  * 
-@@ -21,21 +21,24 @@
- #include <linux/capi.h>
- #include <asm/io.h>
- #include <linux/init.h>
-+#include <linux/isdn_compat.h>
- #include "capicmd.h"
- #include "capiutil.h"
- #include "capilli.h"
- #include "avmcard.h"
- 
--static char *revision = "$Revision: 1.1.4.1 $";
-+static char *revision = "$Revision: 1.40 $";
- 
- /* ------------------------------------------------------------- */
- 
-+#ifndef COMPAT_HAS_2_2_PCI
- static struct pci_device_id b1pci_pci_tbl[] __initdata = {
- 	{ PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_B1, PCI_ANY_ID, PCI_ANY_ID },
- 	{ }				/* Terminating entry */
- };
- 
- MODULE_DEVICE_TABLE(pci, b1pci_pci_tbl);
-+#endif
- MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM B1 PCI card");
- MODULE_AUTHOR("Carsten Paeth");
- MODULE_LICENSE("GPL");
-@@ -416,14 +419,14 @@
- 	}
- 	param.irq = dev->irq;
- 
--	if (pci_resource_start(dev, 2)) { /* B1 PCI V4 */
-+	if (pci_resource_start_io(dev, 2)) { /* B1 PCI V4 */
- #ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
- 		driver = &b1pciv4_driver;
- 
- 		pci_set_master(dev);
- #endif
--		param.membase = pci_resource_start(dev, 0);
--		param.port = pci_resource_start(dev, 2);
-+		param.membase = pci_resource_start_mem(dev, 0);
-+		param.port = pci_resource_start_io(dev, 2);
- 
- 		printk(KERN_INFO
- 		"%s: PCI BIOS reports AVM-B1 V4 at i/o %#x, irq %d, mem %#x\n",
-@@ -440,7 +443,7 @@
- 		}
- 	} else {
- 		param.membase = 0;
--		param.port = pci_resource_start(dev, 1);
-+		param.port = pci_resource_start_io(dev, 1);
- 
- 		printk(KERN_INFO
- 		"%s: PCI BIOS reports AVM-B1 at i/o %#x, irq %d\n",
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/b1pcmcia.c linux-2.4.29/drivers/isdn/avmb1/b1pcmcia.c
---- linux-2.4.29.old/drivers/isdn/avmb1/b1pcmcia.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/b1pcmcia.c	2005-03-22 15:06:44.796282712 +0100
-@@ -1,4 +1,4 @@
--/* $Id: b1pcmcia.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: b1pcmcia.c,v 1.17 2001/09/24 13:22:44 kai Exp $
-  * 
-  * Module for AVM B1/M1/M2 PCMCIA-card.
-  * 
-@@ -25,7 +25,7 @@
- #include "capilli.h"
- #include "avmcard.h"
- 
--static char *revision = "$Revision: 1.1.4.1 $";
-+static char *revision = "$Revision: 1.17 $";
- 
- /* ------------------------------------------------------------- */
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/c4.c linux-2.4.29/drivers/isdn/avmb1/c4.c
---- linux-2.4.29.old/drivers/isdn/avmb1/c4.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/c4.c	2005-03-22 15:06:44.812280280 +0100
-@@ -1,4 +1,4 @@
--/* $Id: c4.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: c4.c,v 1.38 2001/09/24 13:22:44 kai Exp $
-  * 
-  * Module for AVM C4 & C2 card.
-  * 
-@@ -18,6 +18,7 @@
- #include <linux/interrupt.h>
- #include <linux/ioport.h>
- #include <linux/pci.h>
-+#include <linux/isdn_compat.h>
- #include <linux/capi.h>
- #include <linux/kernelcapi.h>
- #include <linux/init.h>
-@@ -29,7 +30,7 @@
- #include "capilli.h"
- #include "avmcard.h"
- 
--static char *revision = "$Revision: 1.1.4.1 $";
-+static char *revision = "$Revision: 1.38 $";
- 
- #undef CONFIG_C4_DEBUG
- #undef CONFIG_C4_POLLDEBUG
-@@ -38,6 +39,7 @@
- 
- static int suppress_pollack;
- 
-+#ifndef COMPAT_HAS_2_2_PCI
- static struct pci_device_id c4_pci_tbl[] __initdata = {
- 	{ PCI_VENDOR_ID_DEC,PCI_DEVICE_ID_DEC_21285, PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_C4 },
- 	{ PCI_VENDOR_ID_DEC,PCI_DEVICE_ID_DEC_21285, PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_C2 },
-@@ -45,6 +47,7 @@
- };
- 
- MODULE_DEVICE_TABLE(pci, c4_pci_tbl);
-+#endif
- MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM C2/C4 cards");
- MODULE_AUTHOR("Carsten Paeth");
- MODULE_LICENSE("GPL");
-@@ -1328,9 +1331,9 @@
- 		}
- 		pci_set_master(dev);
- 
--		param.port = pci_resource_start(dev, 1);
-+		param.port = pci_resource_start_io(dev, 1);
- 		param.irq = dev->irq;
--		param.membase = pci_resource_start(dev, 0);
-+		param.membase = pci_resource_start_mem(dev, 0);
-   
- 		printk(KERN_INFO
- 			"%s: PCI BIOS reports AVM-C%d at i/o %#x, irq %d, mem %#x\n",
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/capi.c linux-2.4.29/drivers/isdn/avmb1/capi.c
---- linux-2.4.29.old/drivers/isdn/avmb1/capi.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/capi.c	2005-03-22 15:06:44.849274656 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capi.c,v 1.1.4.2 2001/12/09 18:45:13 kai Exp $
-+/* $Id: capi.c,v 1.59 2001/11/07 22:35:48 kai Exp $
-  *
-  * CAPI 2.0 Interface for Linux
-  *
-@@ -23,6 +23,7 @@
- #include <linux/smp_lock.h>
- #include <linux/timer.h>
- #include <linux/wait.h>
-+#include <linux/isdn_compat.h>
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
- #include <linux/tty.h>
- #ifdef CONFIG_PPP
-@@ -30,6 +31,9 @@
- #include <linux/ppp_defs.h>
- #include <linux/if_ppp.h>
- #undef CAPI_PPP_ON_RAW_DEVICE
-+#ifdef CAPI_PPP_ON_RAW_DEVICE
-+#include <linux/ppp_channel.h>
-+#endif /* CAPI_PPP_ON_RAW_DEVICE */
- #endif /* CONFIG_PPP */
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
- #include <linux/skbuff.h>
-@@ -38,14 +42,16 @@
- #include <linux/capi.h>
- #include <linux/kernelcapi.h>
- #include <linux/init.h>
-+#ifdef HAVE_DEVFS_FS
- #include <linux/devfs_fs_kernel.h>
-+#endif /* HAVE_DEVFS_FS */
- #include "capiutil.h"
- #include "capicmd.h"
- #if defined(CONFIG_ISDN_CAPI_CAPIFS) || defined(CONFIG_ISDN_CAPI_CAPIFS_MODULE)
- #include "capifs.h"
- #endif
- 
--static char *revision = "$Revision: 1.1.4.2 $";
-+static char *revision = "$Revision: 1.59 $";
- 
- MODULE_DESCRIPTION("CAPI4Linux: Userspace /dev/capi20 interface");
- MODULE_AUTHOR("Carsten Paeth");
-@@ -87,10 +93,10 @@
- 	struct capincci  *nccip;
- 	unsigned int      minor;
- 
--	u16  		 applid;
--	u32		 ncci;
--	u16		 datahandle;
--	u16		 msgid;
-+	__u16		 applid;
-+	__u32		 ncci;
-+	__u16		 datahandle;
-+	__u16		 msgid;
- 
- 	struct file      *file;
- 	struct tty_struct *tty;
-@@ -112,16 +118,22 @@
- 	/* transmit path */
- 	struct datahandle_queue {
- 		    struct datahandle_queue *next;
--		    u16                      datahandle;
-+		    __u16                    datahandle;
- 	} *ackqueue;
- 	int nack;
- 
-+#ifdef CAPI_PPP_ON_RAW_DEVICE
-+	/* interface to generic ppp layer */
-+	struct ppp_channel	chan;
-+	int			chan_connected;
-+	int			chan_index;
-+#endif
- };
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
- 
- struct capincci {
- 	struct capincci *next;
--	u32		 ncci;
-+	__u32		 ncci;
- 	struct capidev	*cdev;
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
- 	struct capiminor *minorp;
-@@ -131,8 +143,8 @@
- struct capidev {
- 	struct capidev *next;
- 	struct file    *file;
--	u16		applid;
--	u16		errcode;
-+	__u16		applid;
-+	__u16		errcode;
- 	unsigned int    minor;
- 	unsigned        userflags;
- 
-@@ -156,22 +168,28 @@
- static struct capiminor *minors = 0;
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
- 
-+#ifdef COMPAT_HAS_kmem_cache
- static kmem_cache_t *capidev_cachep = 0;
- static kmem_cache_t *capincci_cachep = 0;
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
- static kmem_cache_t *capiminor_cachep = 0;
- static kmem_cache_t *capidh_cachep = 0;
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
-+#endif
- 
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
- /* -------- datahandles --------------------------------------------- */
- 
--static int capincci_add_ack(struct capiminor *mp, u16 datahandle)
-+int capincci_add_ack(struct capiminor *mp, __u16 datahandle)
- {
- 	struct datahandle_queue *n, **pp;
- 
- 	n = (struct datahandle_queue *)
-+#ifdef COMPAT_HAS_kmem_cache
- 	kmem_cache_alloc(capidh_cachep, GFP_ATOMIC);
-+#else
-+	kmalloc(sizeof(struct datahandle_queue), GFP_ATOMIC);
-+#endif
- 	if (!n) {
- 	   printk(KERN_ERR "capi: alloc datahandle failed\n");
- 	   return -1;
-@@ -184,7 +202,7 @@
- 	return 0;
- }
- 
--static int capiminor_del_ack(struct capiminor *mp, u16 datahandle)
-+int capiminor_del_ack(struct capiminor *mp, __u16 datahandle)
- {
- 	struct datahandle_queue **pp, *p;
- 
-@@ -192,7 +210,11 @@
-  		if ((*pp)->datahandle == datahandle) {
- 			p = *pp;
- 			*pp = (*pp)->next;
-+#ifdef COMPAT_HAS_kmem_cache
- 			kmem_cache_free(capidh_cachep, p);
-+#else
-+		        kfree(p);
-+#endif
- 			mp->nack--;
- 			return 0;
- 		}
-@@ -200,7 +222,7 @@
- 	return -1;
- }
- 
--static void capiminor_del_all_ack(struct capiminor *mp)
-+void capiminor_del_all_ack(struct capiminor *mp)
- {
- 	struct datahandle_queue **pp, *p;
- 
-@@ -208,7 +230,11 @@
- 	while (*pp) {
- 		p = *pp;
- 		*pp = (*pp)->next;
-+#ifdef COMPAT_HAS_kmem_cache
- 		kmem_cache_free(capidh_cachep, p);
-+#else
-+		kfree(p);
-+#endif
- 		mp->nack--;
- 	}
- }
-@@ -216,13 +242,17 @@
- 
- /* -------- struct capiminor ---------------------------------------- */
- 
--static struct capiminor *capiminor_alloc(u16 applid, u32 ncci)
-+struct capiminor *capiminor_alloc(__u16 applid, __u32 ncci)
- {
- 	struct capiminor *mp, **pp;
-         unsigned int minor = 0;
- 
- 	MOD_INC_USE_COUNT;
-+#ifdef COMPAT_HAS_kmem_cache
- 	mp = (struct capiminor *)kmem_cache_alloc(capiminor_cachep, GFP_ATOMIC);
-+#else
-+	mp = (struct capiminor *)kmalloc(sizeof(struct capiminor), GFP_ATOMIC);
-+#endif
- 	if (!mp) {
- 		MOD_DEC_USE_COUNT;
- 		printk(KERN_ERR "capi: can't alloc capiminor\n");
-@@ -257,7 +287,7 @@
- 	return mp;
- }
- 
--static void capiminor_free(struct capiminor *mp)
-+void capiminor_free(struct capiminor *mp)
- {
- 	struct capiminor **pp;
- 
-@@ -271,7 +301,11 @@
- 			skb_queue_purge(&mp->inqueue);
- 			skb_queue_purge(&mp->outqueue);
- 			capiminor_del_all_ack(mp);
-+#ifdef COMPAT_HAS_kmem_cache
- 			kmem_cache_free(capiminor_cachep, mp);
-+#else
-+			kfree(mp);
-+#endif
- 			MOD_DEC_USE_COUNT;
- #ifdef _DEBUG_REFCOUNT
- 			printk(KERN_DEBUG "capiminor_free %d\n", GET_USE_COUNT(THIS_MODULE));
-@@ -283,7 +317,7 @@
- 	}
- }
- 
--static struct capiminor *capiminor_find(unsigned int minor)
-+struct capiminor *capiminor_find(unsigned int minor)
- {
- 	struct capiminor *p;
- 	for (p = minors; p && p->minor != minor; p = p->next)
-@@ -294,7 +328,7 @@
- 
- /* -------- struct capincci ----------------------------------------- */
- 
--static struct capincci *capincci_alloc(struct capidev *cdev, u32 ncci)
-+static struct capincci *capincci_alloc(struct capidev *cdev, __u32 ncci)
- {
- 	struct capincci *np, **pp;
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
-@@ -302,7 +336,11 @@
- 	kdev_t kdev;
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
- 
-+#ifdef COMPAT_HAS_kmem_cache
- 	np = (struct capincci *)kmem_cache_alloc(capincci_cachep, GFP_ATOMIC);
-+#else
-+	np = (struct capincci *)kmalloc(sizeof(struct capincci), GFP_ATOMIC);
-+#endif
- 	if (!np)
- 		return 0;
- 	memset(np, 0, sizeof(struct capincci));
-@@ -331,7 +369,7 @@
-         return np;
- }
- 
--static void capincci_free(struct capidev *cdev, u32 ncci)
-+static void capincci_free(struct capidev *cdev, __u32 ncci)
- {
- 	struct capincci *np, **pp;
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
-@@ -367,7 +405,11 @@
- 				}
- 			}
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
-+#ifdef COMPAT_HAS_kmem_cache
- 			kmem_cache_free(capincci_cachep, np);
-+#else
-+			kfree(np);
-+#endif
- 			if (*pp == 0) return;
- 		} else {
- 			pp = &(*pp)->next;
-@@ -375,7 +417,7 @@
- 	}
- }
- 
--static struct capincci *capincci_find(struct capidev *cdev, u32 ncci)
-+struct capincci *capincci_find(struct capidev *cdev, __u32 ncci)
- {
- 	struct capincci *p;
- 
-@@ -393,7 +435,11 @@
- 	struct capidev *cdev;
- 	struct capidev **pp;
- 
-+#ifdef COMPAT_HAS_kmem_cache
- 	cdev = (struct capidev *)kmem_cache_alloc(capidev_cachep, GFP_KERNEL);
-+#else
-+	cdev = (struct capidev *)kmalloc(sizeof(struct capidev), GFP_KERNEL);
-+#endif
- 	if (!cdev)
- 		return 0;
- 	memset(cdev, 0, sizeof(struct capidev));
-@@ -423,10 +469,14 @@
- 	if (*pp)
- 		*pp = cdev->next;
- 
-+#ifdef COMPAT_HAS_kmem_cache
- 	kmem_cache_free(capidev_cachep, cdev);
-+#else
-+	kfree(cdev);
-+#endif
- }
- 
--static struct capidev *capidev_find(u16 applid)
-+static struct capidev *capidev_find(__u16 applid)
- {
- 	struct capidev *p;
- 	for (p=capidev_openlist; p; p = p->next) {
-@@ -439,13 +489,13 @@
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
- /* -------- handle data queue --------------------------------------- */
- 
--static struct sk_buff *
-+struct sk_buff *
- gen_data_b3_resp_for(struct capiminor *mp, struct sk_buff *skb)
- {
- 	struct sk_buff *nskb;
- 	nskb = alloc_skb(CAPI_DATA_B3_RESP_LEN, GFP_ATOMIC);
- 	if (nskb) {
--		u16 datahandle = CAPIMSG_U16(skb->data,CAPIMSG_BASELEN+4+4+2);
-+		__u16 datahandle = CAPIMSG_U16(skb->data,CAPIMSG_BASELEN+4+4+2);
- 		unsigned char *s = skb_put(nskb, CAPI_DATA_B3_RESP_LEN);
- 		capimsg_setu16(s, 0, CAPI_DATA_B3_RESP_LEN);
- 		capimsg_setu16(s, 2, mp->applid);
-@@ -458,11 +508,11 @@
- 	return nskb;
- }
- 
--static int handle_recv_skb(struct capiminor *mp, struct sk_buff *skb)
-+int handle_recv_skb(struct capiminor *mp, struct sk_buff *skb)
- {
- 	struct sk_buff *nskb;
- 	unsigned int datalen;
--	u16 errcode, datahandle;
-+	__u16 errcode, datahandle;
- 
- 	datalen = skb->len - CAPIMSG_LEN(skb->data);
- 	if (mp->tty) {
-@@ -504,6 +554,28 @@
- 		kfree_skb(skb);
- 		return 0;
- 
-+#ifdef CAPI_PPP_ON_RAW_DEVICE
-+	} else if (mp->chan_connected) {
-+		if ((nskb = gen_data_b3_resp_for(mp, skb)) == 0) {
-+			printk(KERN_ERR "capi: gen_data_b3_resp failed\n");
-+			return -1;
-+		}
-+		datahandle = CAPIMSG_U16(skb->data,CAPIMSG_BASELEN+4);
-+		errcode = (*capifuncs->capi_put_message)(mp->applid, nskb);
-+		if (errcode != CAPI_NOERROR) {
-+			printk(KERN_ERR "capi: send DATA_B3_RESP failed=%x\n",
-+					errcode);
-+			kfree_skb(nskb);
-+			return -1;
-+		}
-+		(void)skb_pull(skb, CAPIMSG_LEN(skb->data));
-+#ifdef _DEBUG_DATAFLOW
-+		printk(KERN_DEBUG "capi: DATA_B3_RESP %u len=%d => ppp\n",
-+					datahandle, skb->len);
-+#endif
-+		ppp_input(&mp->chan, skb);
-+		return 0;
-+#endif
- 	} else if (mp->file) {
- 		if (skb_queue_len(&mp->recvqueue) > CAPINC_MAX_RECVQUEUE) {
- #if defined(_DEBUG_DATAFLOW) || defined(_DEBUG_TTYFUNCS)
-@@ -538,7 +610,7 @@
- 	return -1;
- }
- 
--static void handle_minor_recv(struct capiminor *mp)
-+void handle_minor_recv(struct capiminor *mp)
- {
- 	struct sk_buff *skb;
- 	while ((skb = skb_dequeue(&mp->inqueue)) != 0) {
-@@ -552,13 +624,13 @@
- 	}
- }
- 
--static int handle_minor_send(struct capiminor *mp)
-+int handle_minor_send(struct capiminor *mp)
- {
- 	struct sk_buff *skb;
--	u16 len;
-+	__u16 len;
- 	int count = 0;
--	u16 errcode;
--	u16 datahandle;
-+	__u16 errcode;
-+	__u16 datahandle;
- 
- 	if (mp->tty && mp->ttyoutstop) {
- #if defined(_DEBUG_DATAFLOW) || defined(_DEBUG_TTYFUNCS)
-@@ -569,7 +641,7 @@
- 
- 	while ((skb = skb_dequeue(&mp->outqueue)) != 0) {
- 		datahandle = mp->datahandle;
--		len = (u16)skb->len;
-+		len = (__u16)skb->len;
- 		skb_push(skb, CAPI_DATA_B3_REQ_LEN);
- 		memset(skb->data, 0, CAPI_DATA_B3_REQ_LEN);
- 		capimsg_setu16(skb->data, 0, CAPI_DATA_B3_REQ_LEN);
-@@ -578,7 +650,7 @@
- 		capimsg_setu8 (skb->data, 5, CAPI_REQ);
- 		capimsg_setu16(skb->data, 6, mp->msgid++);
- 		capimsg_setu32(skb->data, 8, mp->ncci);	/* NCCI */
--		capimsg_setu32(skb->data, 12, (u32) skb->data); /* Data32 */
-+		capimsg_setu32(skb->data, 12, (__u32) skb->data); /* Data32 */
- 		capimsg_setu16(skb->data, 16, len);	/* Data length */
- 		capimsg_setu16(skb->data, 18, datahandle);
- 		capimsg_setu16(skb->data, 20, 0);	/* Flags */
-@@ -620,16 +692,16 @@
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
- /* -------- function called by lower level -------------------------- */
- 
--static void capi_signal(u16 applid, void *param)
-+static void capi_signal(__u16 applid, void *param)
- {
- 	struct capidev *cdev = (struct capidev *)param;
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
- 	struct capiminor *mp;
--	u16 datahandle;
-+	__u16 datahandle;
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
- 	struct capincci *np;
- 	struct sk_buff *skb = 0;
--	u32 ncci;
-+	__u32 ncci;
- 
- 	(void) (*capifuncs->capi_get_message) (applid, &skb);
- 	if (!skb) {
-@@ -683,6 +755,12 @@
- #endif
- 		kfree_skb(skb);
- 		(void)capiminor_del_ack(mp, datahandle);
-+#ifdef CAPI_PPP_ON_RAW_DEVICE
-+		if (mp->chan_connected) {
-+			ppp_output_wakeup(&mp->chan);
-+			return;
-+		}
-+#endif
- 		if (mp->tty) {
- 			if (mp->tty->ldisc.write_wakeup)
- 				mp->tty->ldisc.write_wakeup(mp->tty);
-@@ -758,7 +836,7 @@
- 	struct capidev *cdev = (struct capidev *)file->private_data;
- 	struct sk_buff *skb;
- 	int retval;
--	u16 mlen;
-+	__u16 mlen;
- 
-         if (ppos != &file->f_pos)
- 		return -ESPIPE;
-@@ -998,7 +1076,7 @@
- 						sizeof(ncci));
- 			if (retval)
- 				return -EFAULT;
--			nccip = capincci_find(cdev, (u32) ncci);
-+			nccip = capincci_find(cdev, (__u32) ncci);
- 			if (!nccip)
- 				return 0;
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
-@@ -1023,7 +1101,7 @@
- 						sizeof(ncci));
- 			if (retval)
- 				return -EFAULT;
--			nccip = capincci_find(cdev, (u32) ncci);
-+			nccip = capincci_find(cdev, (__u32) ncci);
- 			if (!nccip || (mp = nccip->minorp) == 0)
- 				return -ESRCH;
- 			return mp->minor;
-@@ -1070,7 +1148,9 @@
- 
- static struct file_operations capi_fops =
- {
-+#ifdef COMPAT_HAS_FILEOP_OWNER
- 	owner:		THIS_MODULE,
-+#endif
- 	llseek:		no_llseek,
- 	read:		capi_read,
- 	write:		capi_write,
-@@ -1233,6 +1313,45 @@
- 		return -EINVAL;
- 
- 	switch (cmd) {
-+#ifdef CAPI_PPP_ON_RAW_DEVICE
-+	case PPPIOCATTACH:
-+		{
-+			int retval, val;
-+			if (get_user(val, (int *) arg))
-+				break;
-+			if (mp->chan_connected)
-+				return -EALREADY;
-+			mp->chan.private = mp;
-+#if 1
-+			return -EINVAL;
-+#else
-+			mp->chan.ops = &ppp_ops;
-+#endif
-+
-+			retval = ppp_register_channel(&mp->chan, val);
-+			if (retval)
-+				return retval;
-+			mp->chan_connected = 1;
-+			mp->chan_index = val;
-+		}
-+		return 0;
-+	case PPPIOCDETACH:
-+		{
-+			if (!mp->chan_connected)
-+				return -ENXIO;
-+			ppp_unregister_channel(&mp->chan);
-+			mp->chan_connected = 0;
-+		}
-+		return 0;
-+	case PPPIOCGUNIT:
-+		{
-+			if (!mp->chan_connected)
-+				return -ENXIO;
-+			if (put_user(mp->chan_index, (int *) arg))
-+				return -EFAULT;
-+		}
-+		return 0;
-+#endif
- 	}
- 	return -EINVAL;
- }
-@@ -1260,7 +1379,9 @@
- 
- static struct file_operations capinc_raw_fops =
- {
-+#ifdef COMPAT_HAS_FILEOP_OWNER
- 	owner:		THIS_MODULE,
-+#endif
- 	llseek:		no_llseek,
- 	read:		capinc_raw_read,
- 	write:		capinc_raw_write,
-@@ -1272,7 +1393,7 @@
- 
- /* -------- tty_operations for capincci ----------------------------- */
- 
--static int capinc_tty_open(struct tty_struct * tty, struct file * file)
-+int capinc_tty_open(struct tty_struct * tty, struct file * file)
- {
- 	struct capiminor *mp;
- 
-@@ -1300,7 +1421,7 @@
- 	return 0;
- }
- 
--static void capinc_tty_close(struct tty_struct * tty, struct file * file)
-+void capinc_tty_close(struct tty_struct * tty, struct file * file)
- {
- 	struct capiminor *mp;
- 
-@@ -1325,8 +1446,8 @@
- #endif
- }
- 
--static int capinc_tty_write(struct tty_struct * tty, int from_user,
--			    const unsigned char *buf, int count)
-+int capinc_tty_write(struct tty_struct * tty, int from_user,
-+		      const unsigned char *buf, int count)
- {
- 	struct capiminor *mp = (struct capiminor *)tty->driver_data;
- 	struct sk_buff *skb;
-@@ -1377,7 +1498,7 @@
- 	return count;
- }
- 
--static void capinc_tty_put_char(struct tty_struct *tty, unsigned char ch)
-+void capinc_tty_put_char(struct tty_struct *tty, unsigned char ch)
- {
- 	struct capiminor *mp = (struct capiminor *)tty->driver_data;
- 	struct sk_buff *skb;
-@@ -1414,7 +1535,7 @@
- 	}
- }
- 
--static void capinc_tty_flush_chars(struct tty_struct *tty)
-+void capinc_tty_flush_chars(struct tty_struct *tty)
- {
- 	struct capiminor *mp = (struct capiminor *)tty->driver_data;
- 	struct sk_buff *skb;
-@@ -1440,7 +1561,7 @@
- 	(void)handle_minor_recv(mp);
- }
- 
--static int capinc_tty_write_room(struct tty_struct *tty)
-+int capinc_tty_write_room(struct tty_struct *tty)
- {
- 	struct capiminor *mp = (struct capiminor *)tty->driver_data;
- 	int room;
-@@ -1458,7 +1579,7 @@
- 	return room;
- }
- 
--static int capinc_tty_chars_in_buffer(struct tty_struct *tty)
-+int capinc_tty_chars_in_buffer(struct tty_struct *tty)
- {
- 	struct capiminor *mp = (struct capiminor *)tty->driver_data;
- 	if (!mp || !mp->nccip) {
-@@ -1476,7 +1597,7 @@
- 	return mp->outbytes;
- }
- 
--static int capinc_tty_ioctl(struct tty_struct *tty, struct file * file,
-+int capinc_tty_ioctl(struct tty_struct *tty, struct file * file,
- 		    unsigned int cmd, unsigned long arg)
- {
- 	int error = 0;
-@@ -1488,14 +1609,14 @@
- 	return error;
- }
- 
--static void capinc_tty_set_termios(struct tty_struct *tty, struct termios * old)
-+void capinc_tty_set_termios(struct tty_struct *tty, struct termios * old)
- {
- #ifdef _DEBUG_TTYFUNCS
- 	printk(KERN_DEBUG "capinc_tty_set_termios\n");
- #endif
- }
- 
--static void capinc_tty_throttle(struct tty_struct * tty)
-+void capinc_tty_throttle(struct tty_struct * tty)
- {
- 	struct capiminor *mp = (struct capiminor *)tty->driver_data;
- #ifdef _DEBUG_TTYFUNCS
-@@ -1505,7 +1626,7 @@
- 		mp->ttyinstop = 1;
- }
- 
--static void capinc_tty_unthrottle(struct tty_struct * tty)
-+void capinc_tty_unthrottle(struct tty_struct * tty)
- {
- 	struct capiminor *mp = (struct capiminor *)tty->driver_data;
- #ifdef _DEBUG_TTYFUNCS
-@@ -1517,7 +1638,7 @@
- 	}
- }
- 
--static void capinc_tty_stop(struct tty_struct *tty)
-+void capinc_tty_stop(struct tty_struct *tty)
- {
- 	struct capiminor *mp = (struct capiminor *)tty->driver_data;
- #ifdef _DEBUG_TTYFUNCS
-@@ -1528,7 +1649,7 @@
- 	}
- }
- 
--static void capinc_tty_start(struct tty_struct *tty)
-+void capinc_tty_start(struct tty_struct *tty)
- {
- 	struct capiminor *mp = (struct capiminor *)tty->driver_data;
- #ifdef _DEBUG_TTYFUNCS
-@@ -1540,43 +1661,49 @@
- 	}
- }
- 
--static void capinc_tty_hangup(struct tty_struct *tty)
-+void capinc_tty_hangup(struct tty_struct *tty)
- {
- #ifdef _DEBUG_TTYFUNCS
- 	printk(KERN_DEBUG "capinc_tty_hangup\n");
- #endif
- }
- 
--static void capinc_tty_break_ctl(struct tty_struct *tty, int state)
-+void capinc_tty_break_ctl(struct tty_struct *tty, int state)
- {
- #ifdef _DEBUG_TTYFUNCS
- 	printk(KERN_DEBUG "capinc_tty_break_ctl(%d)\n", state);
- #endif
- }
- 
--static void capinc_tty_flush_buffer(struct tty_struct *tty)
-+void capinc_tty_flush_buffer(struct tty_struct *tty)
- {
- #ifdef _DEBUG_TTYFUNCS
- 	printk(KERN_DEBUG "capinc_tty_flush_buffer\n");
- #endif
- }
- 
--static void capinc_tty_set_ldisc(struct tty_struct *tty)
-+void capinc_tty_set_ldisc(struct tty_struct *tty)
- {
- #ifdef _DEBUG_TTYFUNCS
- 	printk(KERN_DEBUG "capinc_tty_set_ldisc\n");
- #endif
- }
- 
--static void capinc_tty_send_xchar(struct tty_struct *tty, char ch)
-+void capinc_tty_send_xchar(struct tty_struct *tty, char ch)
- {
- #ifdef _DEBUG_TTYFUNCS
- 	printk(KERN_DEBUG "capinc_tty_send_xchar(%d)\n", ch);
- #endif
- }
- 
--static int capinc_tty_read_proc(char *page, char **start, off_t off,
--				int count, int *eof, void *data)
-+int capinc_tty_read_proc(char *page, char **start, off_t off,
-+			  int count, int *eof, void *data)
-+{
-+	return 0;
-+}
-+
-+int capinc_write_proc(struct file *file, const char *buffer,
-+			  unsigned long count, void *data)
- {
- 	return 0;
- }
-@@ -1588,7 +1715,7 @@
- static struct termios *capinc_tty_termios[CAPINC_NR_PORTS];
- static struct termios *capinc_tty_termios_locked[CAPINC_NR_PORTS];
- 
--static int capinc_tty_init(void)
-+int capinc_tty_init(void)
- {
- 	struct tty_driver *drv = &capinc_tty_driver;
- 
-@@ -1646,7 +1773,7 @@
- 	return 0;
- }
- 
--static void capinc_tty_exit(void)
-+void capinc_tty_exit(void)
- {
- 	struct tty_driver *drv = &capinc_tty_driver;
- 	int retval;
-@@ -1771,8 +1898,9 @@
- 
- /* -------- init function and module interface ---------------------- */
- 
-+#ifdef COMPAT_HAS_kmem_cache
- 
--static void alloc_exit(void)
-+static void __exit alloc_exit(void)
- {
- 	if (capidev_cachep) {
- 		(void)kmem_cache_destroy(capidev_cachep);
-@@ -1837,8 +1965,9 @@
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
- 	return 0;
- }
-+#endif
- 
--static void lower_callback(unsigned int cmd, u32 contr, void *data)
-+static void lower_callback(unsigned int cmd, __u32 contr, void *data)
- {
- 	struct capi_ncciinfo *np;
- 	struct capidev *cdev;
-@@ -1900,15 +2029,19 @@
- 		MOD_DEC_USE_COUNT;
- 		return -EIO;
- 	}
-+#ifdef HAVE_DEVFS_FS
-         devfs_register_series (NULL, "capi/r%u", CAPINC_NR_PORTS,
- 			      DEVFS_FL_DEFAULT,
-                               capi_rawmajor, 0,
-                               S_IFCHR | S_IRUSR | S_IWUSR,
-                               &capinc_raw_fops, NULL);
-+#endif
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
-+#ifdef HAVE_DEVFS_FS
- 	devfs_register (NULL, "isdn/capi20", DEVFS_FL_DEFAULT,
- 			capi_major, 0, S_IFCHR | S_IRUSR | S_IWUSR,
- 			&capi_fops, NULL);
-+#endif
- 	printk(KERN_NOTICE "capi20: started up with major %d\n", capi_major);
- 
- 	if ((capifuncs = attach_capi_interface(&cuser)) == 0) {
-@@ -1918,9 +2051,11 @@
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
- 		devfs_unregister_chrdev(capi_rawmajor, "capi/r%d");
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
-+#ifdef HAVE_DEVFS_FS
- 		devfs_unregister(devfs_find_handle(NULL, "capi20",
- 						   capi_major, 0,
- 						   DEVFS_SPECIAL_CHR, 0));
-+#endif
- 		return -EIO;
- 	}
- 
-@@ -1934,8 +2069,10 @@
- 	}
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
- 
-+#ifdef COMPAT_HAS_kmem_cache
- 	if (alloc_init() < 0) {
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
-+#ifdef HAVE_DEVFS_FS
- 		unsigned int j;
- 		devfs_unregister_chrdev(capi_rawmajor, "capi/r%d");
- 		for (j = 0; j < CAPINC_NR_PORTS; j++) {
-@@ -1943,16 +2080,20 @@
- 			sprintf(devname, "capi/r%u", j);
- 			devfs_unregister(devfs_find_handle(NULL, devname, capi_rawmajor, j, DEVFS_SPECIAL_CHR, 0));
- 		}
-+#endif
- 		capinc_tty_exit();
- #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
- 		(void) detach_capi_interface(&cuser);
- 		devfs_unregister_chrdev(capi_major, "capi20");
-+#ifdef HAVE_DEVFS_FS
- 		devfs_unregister(devfs_find_handle(NULL, "capi20",
- 						   capi_major, 0,
- 						   DEVFS_SPECIAL_CHR, 0));
-+#endif
- 		MOD_DEC_USE_COUNT;
- 		return -ENOMEM;
- 	}
-+#endif /* COMPAT_HAS_kmem_cache */
- 
- 	(void)proc_init();
- 
-@@ -1975,23 +2116,31 @@
- static void __exit capi_exit(void)
- {
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
-+#ifdef HAVE_DEVFS_FS
- 	unsigned int j;
- #endif
-+#endif
-+#ifdef COMPAT_HAS_kmem_cache
- 	alloc_exit();
-+#endif
- 	(void)proc_exit();
- 
- 	devfs_unregister_chrdev(capi_major, "capi20");
-+#ifdef HAVE_DEVFS_FS
- 	devfs_unregister(devfs_find_handle(NULL, "isdn/capi20", capi_major, 0, DEVFS_SPECIAL_CHR, 0));
-+#endif
- 
- #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
- 	capinc_tty_exit();
- 	devfs_unregister_chrdev(capi_rawmajor, "capi/r%d");
-+#ifdef HAVE_DEVFS_FS
- 	for (j = 0; j < CAPINC_NR_PORTS; j++) {
- 		char devname[32];
- 		sprintf(devname, "capi/r%u", j);
- 		devfs_unregister(devfs_find_handle(NULL, devname, capi_rawmajor, j, DEVFS_SPECIAL_CHR, 0));
- 	}
- #endif
-+#endif
- 	(void) detach_capi_interface(&cuser);
- 	printk(KERN_NOTICE "capi: Rev %s: unloaded\n", rev);
- }
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/capicmd.h linux-2.4.29/drivers/isdn/avmb1/capicmd.h
---- linux-2.4.29.old/drivers/isdn/avmb1/capicmd.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/capicmd.h	2005-03-22 15:06:44.865272224 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capicmd.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: capicmd.h,v 1.4 2001/09/24 13:22:44 kai Exp $
-  * 
-  * CAPI 2.0 Interface for Linux
-  * 
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/capidev.h linux-2.4.29/drivers/isdn/avmb1/capidev.h
---- linux-2.4.29.old/drivers/isdn/avmb1/capidev.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/capidev.h	2005-03-22 15:06:44.880269944 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capidev.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: capidev.h,v 1.8 2001/09/24 13:22:44 kai Exp $
-  *
-  * CAPI 2.0 Interface for Linux
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/capidrv.c linux-2.4.29/drivers/isdn/avmb1/capidrv.c
---- linux-2.4.29.old/drivers/isdn/avmb1/capidrv.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/capidrv.c	2005-03-22 15:06:44.918264168 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capidrv.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: capidrv.c,v 1.45 2001/09/24 13:22:44 kai Exp $
-  *
-  * ISDN4Linux Driver, using capi20 interface (kernelcapi)
-  *
-@@ -35,7 +35,7 @@
- #include "capicmd.h"
- #include "capidrv.h"
- 
--static char *revision = "$Revision: 1.1.4.1 $";
-+static char *revision = "$Revision: 1.45 $";
- static int debugmode = 0;
- 
- MODULE_DESCRIPTION("CAPI4Linux: Interface to ISDN4Linux");
-@@ -105,7 +105,6 @@
- 				int oldstate;
- 				/* */
- 				__u16 datahandle;
--                                spinlock_t lock;
- 				struct ncci_datahandle_queue {
- 				    struct ncci_datahandle_queue *next;
- 				    __u16                         datahandle;
-@@ -423,7 +422,6 @@
- 	nccip->plcip = plcip;
- 	nccip->chan = plcip->chan;
- 	nccip->datahandle = 0;
--        nccip->lock = SPIN_LOCK_UNLOCKED;
- 
- 	nccip->next = plcip->ncci_list;
- 	plcip->ncci_list = nccip;
-@@ -480,7 +478,6 @@
- 		           __u16 datahandle, int len)
- {
- 	struct ncci_datahandle_queue *n, **pp;
--	unsigned long flags;
- 
- 	n = (struct ncci_datahandle_queue *)
- 		kmalloc(sizeof(struct ncci_datahandle_queue), GFP_ATOMIC);
-@@ -491,31 +488,25 @@
- 	n->next = 0;
- 	n->datahandle = datahandle;
- 	n->len = len;
--	spin_lock_irqsave(&nccip->lock, flags);
- 	for (pp = &nccip->ackqueue; *pp; pp = &(*pp)->next) ;
- 	*pp = n;
--	spin_unlock_irqrestore(&nccip->lock, flags);
- 	return 0;
- }
- 
- static int capidrv_del_ack(struct capidrv_ncci *nccip, __u16 datahandle)
- {
- 	struct ncci_datahandle_queue **pp, *p;
--	unsigned long flags;
- 	int len;
- 
--	spin_lock_irqsave(&nccip->lock, flags);
- 	for (pp = &nccip->ackqueue; *pp; pp = &(*pp)->next) {
-  		if ((*pp)->datahandle == datahandle) {
- 			p = *pp;
- 			len = p->len;
- 			*pp = (*pp)->next;
--	                spin_unlock_irqrestore(&nccip->lock, flags);
- 		        kfree(p);
- 			return len;
- 		}
- 	}
--        spin_unlock_irqrestore(&nccip->lock, flags);
- 	return -1;
- }
- 
-@@ -523,25 +514,13 @@
- 
- static void send_message(capidrv_contr * card, _cmsg * cmsg)
- {
--	struct sk_buff	*skb;
--	size_t		len;
--	u16		err;
--
-+	struct sk_buff *skb;
-+	size_t len;
- 	capi_cmsg2message(cmsg, cmsg->buf);
- 	len = CAPIMSG_LEN(cmsg->buf);
- 	skb = alloc_skb(len, GFP_ATOMIC);
--	if(!skb) {
--		printk(KERN_ERR "no skb len(%d) memory\n", len);
--		return;
--	}
- 	memcpy(skb_put(skb, len), cmsg->buf, len);
--	err = (*capifuncs->capi_put_message) (global.appid, skb);
--	if (err) {
--		printk(KERN_WARNING "%s: capi_put_message error: %04x\n",
--			__FUNCTION__, err);
--		kfree_skb(skb);
--		return;
--	}
-+	(*capifuncs->capi_put_message) (global.appid, skb);
- 	global.nsentctlpkt++;
- }
- 
-@@ -1932,8 +1911,10 @@
- 		        (void)capidrv_del_ack(nccip, datahandle);
- 			return 0;
- 		}
-+#if 1
- 		printk(KERN_DEBUG "capidrv-%d: only %d bytes headroom, need %d\n",
- 		       card->contrnr, skb_headroom(skb), msglen);
-+#endif
- 		memcpy(skb_push(nskb, msglen), sendcmsg.buf, msglen);
- 		errcode = (*capifuncs->capi_put_message) (global.appid, nskb);
- 		if (errcode == CAPI_NOERROR) {
-@@ -2035,6 +2016,52 @@
- 	send_message(card, &cmdcmsg);
- }
- 
-+#if 0
-+static void disable_dchannel_trace(capidrv_contr *card)
-+{
-+        __u8 manufacturer[CAPI_MANUFACTURER_LEN];
-+        capi_version version;
-+	__u16 contr = card->contrnr;
-+	__u16 errcode;
-+	__u16 avmversion[3];
-+
-+        errcode = (*capifuncs->capi_get_manufacturer)(contr, manufacturer);
-+        if (errcode != CAPI_NOERROR) {
-+	   printk(KERN_ERR "%s: can't get manufacturer (0x%x)\n",
-+			card->name, errcode);
-+	   return;
-+	}
-+	if (strstr(manufacturer, "AVM") == 0) {
-+	   printk(KERN_ERR "%s: not from AVM, no d-channel trace possible (%s)\n",
-+			card->name, manufacturer);
-+	   return;
-+	}
-+        errcode = (*capifuncs->capi_get_version)(contr, &version);
-+        if (errcode != CAPI_NOERROR) {
-+	   printk(KERN_ERR "%s: can't get version (0x%x)\n",
-+			card->name, errcode);
-+	   return;
-+	}
-+	avmversion[0] = (version.majormanuversion >> 4) & 0x0f;
-+	avmversion[1] = (version.majormanuversion << 4) & 0xf0;
-+	avmversion[1] |= (version.minormanuversion >> 4) & 0x0f;
-+	avmversion[2] |= version.minormanuversion & 0x0f;
-+
-+        if (avmversion[0] > 3 || (avmversion[0] == 3 && avmversion[1] > 5)) {
-+		printk(KERN_INFO "%s: D2 trace disabled\n", card->name);
-+	} else {
-+		printk(KERN_INFO "%s: D3 trace disabled\n", card->name);
-+	}
-+	capi_fill_MANUFACTURER_REQ(&cmdcmsg, global.appid,
-+				   card->msgid++,
-+				   contr,
-+				   0x214D5641,  /* ManuID */
-+				   0,           /* Class */
-+				   1,           /* Function */
-+				   (_cstruct)"\004\000\000\000\000");
-+	send_message(card, &cmdcmsg);
-+}
-+#endif
- 
- static void send_listen(capidrv_contr *card)
- {
-@@ -2200,10 +2227,10 @@
- 			free_ncci(card, card->bchans[card->nbchan-1].nccip);
- 		if (card->bchans[card->nbchan-1].plcip)
- 			free_plci(card, card->bchans[card->nbchan-1].plcip);
-+		if (card->plci_list)
-+			printk(KERN_ERR "capidrv: bug in free_plci()\n");
- 		card->nbchan--;
- 	}
--	if (card->plci_list)
--		printk(KERN_ERR "capidrv: bug in free_plci()\n");
- 	kfree(card->bchans);
- 	card->bchans = 0;
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/capidrv.h linux-2.4.29/drivers/isdn/avmb1/capidrv.h
---- linux-2.4.29.old/drivers/isdn/avmb1/capidrv.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/capidrv.h	2005-03-22 15:06:44.935261584 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capidrv.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: capidrv.h,v 1.4 2001/09/24 13:22:44 kai Exp $
-  *
-  * ISDN4Linux Driver, using capi20 interface (kernelcapi)
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/capifs.c linux-2.4.29/drivers/isdn/avmb1/capifs.c
---- linux-2.4.29.old/drivers/isdn/avmb1/capifs.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/capifs.c	2005-03-22 15:06:44.950259304 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capifs.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: capifs.c,v 1.22 2001/09/24 13:22:44 kai Exp $
-  * 
-  * Copyright 2000 by Carsten Paeth <calle@calle.de>
-  *
-@@ -25,6 +25,7 @@
- #include <linux/major.h>
- #include <linux/slab.h>
- #include <linux/ctype.h>
-+#include <linux/isdn_compat.h>
- #include <asm/bitops.h>
- #include <asm/uaccess.h>
- 
-@@ -32,7 +33,7 @@
- MODULE_AUTHOR("Carsten Paeth");
- MODULE_LICENSE("GPL");
- 
--static char *revision = "$Revision: 1.1.4.1 $";
-+static char *revision = "$Revision: 1.22 $";
- 
- struct capifs_ncci {
- 	struct inode *inode;
-@@ -69,14 +70,21 @@
- static int capifs_root_readdir(struct file *,void *,filldir_t);
- static struct dentry *capifs_root_lookup(struct inode *,struct dentry *);
- static int capifs_revalidate(struct dentry *, int);
-+#ifdef COMPAT_VFS_2_4
- static struct inode *capifs_new_inode(struct super_block *sb);
-+#endif
- 
- static struct file_operations capifs_root_operations = {
-+#ifdef COMPAT_VFS_2_4
- 	read:		generic_read_dir,
-+#endif
- 	readdir:	capifs_root_readdir,
- };
- 
- struct inode_operations capifs_root_inode_operations = {
-+#ifndef COMPAT_VFS_2_4
-+	default_file_ops: &capifs_root_operations, /* file operations */
-+#endif
- 	lookup: capifs_root_lookup,
- };
- 
-@@ -101,12 +109,20 @@
- 	switch(nr)
- 	{
- 	case 0:
-+#ifdef COMPAT_VFS_2_4
- 		if (filldir(dirent, ".", 1, nr, inode->i_ino, DT_DIR) < 0)
-+#else
-+		if (filldir(dirent, ".", 1, nr, inode->i_ino) < 0)
-+#endif
- 			return 0;
- 		filp->f_pos = ++nr;
- 		/* fall through */
- 	case 1:
-+#ifdef COMPAT_VFS_2_4
- 		if (filldir(dirent, "..", 2, nr, inode->i_ino, DT_DIR) < 0)
-+#else
-+		if (filldir(dirent, "..", 2, nr, inode->i_ino) < 0)
-+#endif
- 			return 0;
- 		filp->f_pos = ++nr;
- 		/* fall through */
-@@ -118,7 +134,11 @@
- 				char *p = numbuf;
- 				if (np->type) *p++ = np->type;
- 				sprintf(p, "%u", np->num);
-+#ifdef COMPAT_VFS_2_4
- 				if ( filldir(dirent, numbuf, strlen(numbuf), nr, nr, DT_UNKNOWN) < 0 )
-+#else
-+				if ( filldir(dirent, numbuf, strlen(numbuf), nr, nr) < 0 )
-+#endif
- 					return 0;
- 			}
- 			filp->f_pos = ++nr;
-@@ -180,7 +200,7 @@
- 
- 	dentry->d_inode = np->inode;
- 	if ( dentry->d_inode )
--		atomic_inc(&dentry->d_inode->i_count);
-+		i_count_inc(dentry->d_inode->i_count);
- 	
- 	d_add(dentry, dentry->d_inode);
- 
-@@ -199,9 +219,9 @@
- 
- 	for ( i = 0 ; i < sbi->max_ncci ; i++ ) {
- 		if ( (inode = sbi->nccis[i].inode) ) {
--			if (atomic_read(&inode->i_count) != 1 )
-+			if (i_count_read(inode->i_count) != 1 )
- 				printk("capifs_put_super: badness: entry %d count %d\n",
--				       i, (unsigned)atomic_read(&inode->i_count));
-+				       i, (unsigned)i_count_read(inode->i_count));
- 			inode->i_nlink--;
- 			iput(inode);
- 		}
-@@ -213,11 +233,24 @@
- 
- 	kfree(sbi->nccis);
- 	kfree(sbi);
-+#ifndef COMPAT_VFS_2_4
-+	MOD_DEC_USE_COUNT;
-+#endif
- }
- 
-+#ifdef COMPAT_VFS_2_4
- static int capifs_statfs(struct super_block *sb, struct statfs *buf);
-+#else
-+static int capifs_statfs(struct super_block *sb, struct statfs *buf, int bufsiz);
-+static void capifs_write_inode(struct inode *inode) { };
-+static void capifs_read_inode(struct inode *inode);
-+#endif
- 
- static struct super_operations capifs_sops = {
-+#ifndef COMPAT_VFS_2_4
-+	read_inode:	capifs_read_inode,
-+	write_inode:	capifs_write_inode,
-+#endif
- 	put_super:	capifs_put_super,
- 	statfs:		capifs_statfs,
- };
-@@ -288,6 +321,10 @@
- 	struct dentry * root;
- 	struct capifs_sb_info *sbi;
- 
-+#ifndef COMPAT_VFS_2_4
-+	MOD_INC_USE_COUNT;
-+	lock_super(s);
-+#endif
- 	/* Super block already completed? */
- 	if (s->s_root)
- 		goto out;
-@@ -322,6 +359,7 @@
- 	/*
- 	 * Get the root inode and dentry, but defer checking for errors.
- 	 */
-+#ifdef COMPAT_VFS_2_4
- 	root_inode = capifs_new_inode(s);
- 	if (root_inode) {
- 		root_inode->i_ino = 1;
-@@ -331,6 +369,10 @@
- 		root_inode->i_nlink = 2;
- 	} 
- 	root = d_alloc_root(root_inode);
-+#else
-+	root_inode = iget(s, 1); /* inode 1 == root directory */
-+	root = d_alloc_root(root_inode, NULL);
-+#endif
- 
- 	/*
- 	 * Check whether somebody else completed the super block.
-@@ -370,11 +412,34 @@
- 	mounts = s;
- 
- out:	/* Success ... somebody else completed the super block for us. */ 
-+#ifndef COMPAT_VFS_2_4
-+	unlock_super(s);
-+#endif
- 	return s;
- fail:
-+#ifndef COMPAT_VFS_2_4
-+	unlock_super(s);
-+	MOD_DEC_USE_COUNT;
-+#endif
- 	return NULL;
- }
- 
-+#ifndef COMPAT_VFS_2_4
-+static int capifs_statfs(struct super_block *sb, struct statfs *buf, int bufsiz)
-+{
-+	struct statfs tmp;
-+
-+	tmp.f_type = CAPIFS_SUPER_MAGIC;
-+	tmp.f_bsize = 1024;
-+	tmp.f_blocks = 0;
-+	tmp.f_bfree = 0;
-+	tmp.f_bavail = 0;
-+	tmp.f_files = 0;
-+	tmp.f_ffree = 0;
-+	tmp.f_namelen = NAME_MAX;
-+	return copy_to_user(buf, &tmp, bufsiz) ? -EFAULT : 0;
-+}
-+#else
- static int capifs_statfs(struct super_block *sb, struct statfs *buf)
- {
- 	buf->f_type = CAPIFS_SUPER_MAGIC;
-@@ -387,7 +452,9 @@
- 	buf->f_namelen = NAME_MAX;
- 	return 0;
- }
-+#endif
- 
-+#ifdef COMPAT_VFS_2_4
- static struct inode *capifs_new_inode(struct super_block *sb)
- {
- 	struct inode *inode = new_inode(sb);
-@@ -399,8 +466,51 @@
- 	}
- 	return inode;
- }
-+#else
-+static void capifs_read_inode(struct inode *inode)
-+{
-+	ino_t ino = inode->i_ino;
-+	struct capifs_sb_info *sbi = SBI(inode->i_sb);
-+
-+	inode->i_mode = 0;
-+	inode->i_nlink = 0;
-+	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
-+	inode->i_blocks = 0;
-+	inode->i_blksize = 1024;
-+	inode->i_uid = inode->i_gid = 0;
-+
-+	if ( ino == 1 ) {
-+		inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO | S_IWUSR;
-+		inode->i_op = &capifs_root_inode_operations;
-+		inode->i_nlink = 2;
-+		return;
-+	} 
- 
-+	ino -= 2;
-+	if ( ino >= sbi->max_ncci )
-+		return;		/* Bogus */
-+	
-+#ifdef COMPAT_VFS_2_4
-+	init_special_inode(inode, S_IFCHR, 0);
-+#else
-+	inode->i_mode = S_IFCHR;
-+	inode->i_op = &chrdev_inode_operations;
-+#endif
-+
-+	return;
-+}
-+#endif
-+
-+#ifndef COMPAT_VFS_2_4
-+static struct file_system_type capifs_fs_type = {
-+	"capifs",
-+	0,
-+	capifs_read_super,
-+	NULL
-+};
-+#else
- static DECLARE_FSTYPE(capifs_fs_type, "capifs", capifs_read_super, 0);
-+#endif
- 
- void capifs_new_ncci(char type, unsigned int num, kdev_t device)
- {
-@@ -421,16 +531,26 @@
- 				break;
- 			}
- 		}
-+#ifdef COMPAT_VFS_2_4
- 		if ( ino >= sbi->max_ncci )
- 			continue;
- 
- 		if ((np->inode = capifs_new_inode(sb)) != NULL) {
-+#else
-+		if ((np->inode = iget(sb, ino+2)) != NULL) {
-+#endif
- 			struct inode *inode = np->inode;
- 			inode->i_uid = sbi->setuid ? sbi->uid : current->fsuid;
- 			inode->i_gid = sbi->setgid ? sbi->gid : current->fsgid;
-+#ifdef COMPAT_VFS_2_4
- 			inode->i_nlink = 1;
- 			inode->i_ino = ino + 2;
- 			init_special_inode(inode, sbi->mode|S_IFCHR, np->kdev);
-+#else
-+			inode->i_mode = sbi->mode | S_IFCHR;
-+			inode->i_rdev = np->kdev;
-+			inode->i_nlink++;
-+#endif
- 		}
- 	}
- }
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/capifs.h linux-2.4.29/drivers/isdn/avmb1/capifs.h
---- linux-2.4.29.old/drivers/isdn/avmb1/capifs.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/capifs.h	2005-03-22 15:06:44.965257024 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capifs.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: capifs.h,v 1.4 2001/09/24 13:22:44 kai Exp $
-  * 
-  * Copyright 2000 by Carsten Paeth <calle@calle.de>
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/capilli.h linux-2.4.29/drivers/isdn/avmb1/capilli.h
---- linux-2.4.29.old/drivers/isdn/avmb1/capilli.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/capilli.h	2005-03-22 15:06:44.980254744 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capilli.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: capilli.h,v 1.5 2001/09/24 13:22:44 kai Exp $
-  * 
-  * Kernel CAPI 2.0 Driver Interface for Linux
-  * 
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/capiutil.c linux-2.4.29/drivers/isdn/avmb1/capiutil.c
---- linux-2.4.29.old/drivers/isdn/avmb1/capiutil.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/capiutil.c	2005-03-22 15:06:44.997252160 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capiutil.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: capiutil.c,v 1.16 2001/09/24 13:22:44 kai Exp $
-  *
-  * CAPI 2.0 convert capi message to capi message struct
-  *
-@@ -19,6 +19,7 @@
- #include <linux/init.h>
- #include <asm/segment.h>
- #include <linux/config.h>
-+#include <linux/isdn_compat.h>
- #include "capiutil.h"
- 
- MODULE_DESCRIPTION("CAPI4Linux: CAPI message conversion support");
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/capiutil.h linux-2.4.29/drivers/isdn/avmb1/capiutil.h
---- linux-2.4.29.old/drivers/isdn/avmb1/capiutil.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/capiutil.h	2005-03-22 15:06:45.040245624 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capiutil.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: capiutil.h,v 1.7 2001/09/24 13:22:44 kai Exp $
-  *
-  * CAPI 2.0 defines & types
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/kcapi.c linux-2.4.29/drivers/isdn/avmb1/kcapi.c
---- linux-2.4.29.old/drivers/isdn/avmb1/kcapi.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/kcapi.c	2005-03-22 15:06:45.062242280 +0100
-@@ -1,4 +1,4 @@
--/* $Id: kcapi.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: kcapi.c,v 1.28 2001/09/24 13:22:44 kai Exp $
-  * 
-  * Kernel CAPI 2.0 Module
-  * 
-@@ -21,6 +21,7 @@
- #include <linux/proc_fs.h>
- #include <linux/skbuff.h>
- #include <linux/tqueue.h>
-+#include <linux/isdn_compat.h>
- #include <linux/capi.h>
- #include <linux/kernelcapi.h>
- #include <linux/locks.h>
-@@ -33,7 +34,7 @@
- #include <linux/b1lli.h>
- #endif
- 
--static char *revision = "$Revision: 1.1.4.1 $";
-+static char *revision = "$Revision: 1.28 $";
- 
- /* ------------------------------------------------------------- */
- 
-@@ -64,7 +65,6 @@
- 	__u32 ncci;
- 	__u32 winsize;
- 	int   nmsg;
--        spinlock_t lock;
- 	struct msgidqueue *msgidqueue;
- 	struct msgidqueue *msgidlast;
- 	struct msgidqueue *msgidfree;
-@@ -104,14 +104,14 @@
- #define APPL(a)		   (&applications[(a)-1])
- #define	VALID_APPLID(a)	   ((a) && (a) <= CAPI_MAXAPPL && APPL(a)->applid == a)
- #define APPL_IS_FREE(a)    (APPL(a)->applid == 0)
--#define APPL_MARK_FREE(a)  do{ APPL(a)->applid=0; MOD_DEC_USE_COUNT; }while(0)
--#define APPL_MARK_USED(a)  do{ APPL(a)->applid=(a); MOD_INC_USE_COUNT; }while(0)
-+#define APPL_MARK_FREE(a)  do{ APPL(a)->applid=0; MOD_DEC_USE_COUNT; }while(0);
-+#define APPL_MARK_USED(a)  do{ APPL(a)->applid=(a); MOD_INC_USE_COUNT; }while(0);
- 
- #define NCCI2CTRL(ncci)    (((ncci) >> 24) & 0x7f)
- 
- #define VALID_CARD(c)	   ((c) > 0 && (c) <= CAPI_MAXCONTR)
- #define CARD(c)		   (&cards[(c)-1])
--#define CARDNR(cp)	   ((((cp)-cards)+1) & 0xff)
-+#define CARDNR(cp)	   (((cp)-cards)+1)
- 
- static struct capi_appl applications[CAPI_MAXAPPL];
- static struct capi_ctr cards[CAPI_MAXCONTR];
-@@ -535,9 +535,13 @@
- 	 * of devices. Devices can only removed in
- 	 * user process, not in bh.
- 	 */
-+#ifdef COMPAT_HAS_SCHEDULE_TASK
- 	MOD_INC_USE_COUNT;
- 	if (schedule_task(&tq_state_notify) == 0)
- 		MOD_DEC_USE_COUNT;
-+#else
-+	queue_task(&tq_state_notify, &tq_scheduler);
-+#endif
- 	return 0;
- }
- 
-@@ -546,13 +550,7 @@
- static void notify_up(__u32 contr)
- {
- 	struct capi_interface_user *p;
--	__u16 appl;
- 
--	for (appl = 1; appl <= CAPI_MAXAPPL; appl++) {
--		if (!VALID_APPLID(appl)) continue;
--		if (APPL(appl)->releasing) continue;
--		CARD(contr)->driver->register_appl(CARD(contr), appl, &APPL(appl)->rparam);
--	}
-         printk(KERN_NOTICE "kcapi: notify up contr %d\n", contr);
- 	spin_lock(&capi_users_lock);
- 	for (p = capi_users; p; p = p->next) {
-@@ -639,7 +637,9 @@
- 		kfree(np);
- 		MOD_DEC_USE_COUNT;
- 	}
-+#ifdef COMPAT_HAS_SCHEDULE_TASK
- 	MOD_DEC_USE_COUNT;
-+#endif
- }
- 	
- /* -------- NCCI Handling ------------------------------------- */
-@@ -647,7 +647,6 @@
- static inline void mq_init(struct capi_ncci * np)
- {
- 	int i;
--        np->lock = SPIN_LOCK_UNLOCKED;
- 	np->msgidqueue = 0;
- 	np->msgidlast = 0;
- 	np->nmsg = 0;
-@@ -662,11 +661,8 @@
- static inline int mq_enqueue(struct capi_ncci * np, __u16 msgid)
- {
- 	struct msgidqueue *mq;
--	spin_lock_bh(&np->lock);
--	if ((mq = np->msgidfree) == 0) {
--	        spin_unlock_bh(&np->lock);
-+	if ((mq = np->msgidfree) == 0)
- 		return 0;
--	}
- 	np->msgidfree = mq->next;
- 	mq->msgid = msgid;
- 	mq->next = 0;
-@@ -676,14 +672,12 @@
- 	if (!np->msgidqueue)
- 		np->msgidqueue = mq;
- 	np->nmsg++;
--	spin_unlock_bh(&np->lock);
- 	return 1;
- }
- 
- static inline int mq_dequeue(struct capi_ncci * np, __u16 msgid)
- {
- 	struct msgidqueue **pp;
--	spin_lock_bh(&np->lock);
- 	for (pp = &np->msgidqueue; *pp; pp = &(*pp)->next) {
- 		if ((*pp)->msgid == msgid) {
- 			struct msgidqueue *mq = *pp;
-@@ -693,11 +687,9 @@
- 			mq->next = np->msgidfree;
- 			np->msgidfree = mq;
- 			np->nmsg--;
--	                spin_unlock_bh(&np->lock);
- 			return 1;
- 		}
- 	}
--	spin_unlock_bh(&np->lock);
- 	return 0;
- }
- 
-@@ -720,16 +712,12 @@
- 			nextpp = &(*pp)->next;
- 		}
- 	}
--	if (APPL(appl)->releasing) { /* only release if the application was marked for release */
--		printk(KERN_DEBUG "kcapi: appl %d releasing(%d)\n", appl, APPL(appl)->releasing);
--		APPL(appl)->releasing--;
--		if (APPL(appl)->releasing <= 0) {
--			APPL(appl)->signal = 0;
--			APPL_MARK_FREE(appl);
--			printk(KERN_INFO "kcapi: appl %d down\n", appl);
--		}
--	} else
--		printk(KERN_WARNING "kcapi: appl %d card%d released without request\n", appl, card->cnr);
-+	APPL(appl)->releasing--;
-+	if (APPL(appl)->releasing <= 0) {
-+		APPL(appl)->signal = 0;
-+		APPL_MARK_FREE(appl);
-+		printk(KERN_INFO "kcapi: appl %d down\n", appl);
-+	}
- }
- /*
-  * ncci management
-@@ -882,7 +870,16 @@
- 
- static void controllercb_ready(struct capi_ctr * card)
- {
-+	__u16 appl;
-+
- 	card->cardstate = CARD_RUNNING;
-+
-+	for (appl = 1; appl <= CAPI_MAXAPPL; appl++) {
-+		if (!VALID_APPLID(appl)) continue;
-+		if (APPL(appl)->releasing) continue;
-+		card->driver->register_appl(card, appl, &APPL(appl)->rparam);
-+	}
-+
-         printk(KERN_NOTICE "kcapi: card %d \"%s\" ready.\n",
- 		CARDNR(card), card->name);
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/t1isa.c linux-2.4.29/drivers/isdn/avmb1/t1isa.c
---- linux-2.4.29.old/drivers/isdn/avmb1/t1isa.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/t1isa.c	2005-03-22 15:06:45.078239848 +0100
-@@ -1,4 +1,4 @@
--/* $Id: t1isa.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: t1isa.c,v 1.22 2001/09/24 13:22:44 kai Exp $
-  * 
-  * Module for AVM T1 HEMA-card.
-  * 
-@@ -19,13 +19,14 @@
- #include <linux/capi.h>
- #include <linux/kernelcapi.h>
- #include <linux/init.h>
-+#include <linux/isdn_compat.h>
- #include <asm/io.h>
- #include "capicmd.h"
- #include "capiutil.h"
- #include "capilli.h"
- #include "avmcard.h"
- 
--static char *revision = "$Revision: 1.1.4.1 $";
-+static char *revision = "$Revision: 1.22 $";
- 
- /* ------------------------------------------------------------- */
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/avmb1/t1pci.c linux-2.4.29/drivers/isdn/avmb1/t1pci.c
---- linux-2.4.29.old/drivers/isdn/avmb1/t1pci.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/avmb1/t1pci.c	2005-03-22 15:06:45.094237416 +0100
-@@ -1,4 +1,4 @@
--/* $Id: t1pci.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: t1pci.c,v 1.25 2001/09/24 13:22:44 kai Exp $
-  * 
-  * Module for AVM T1 PCI-card.
-  * 
-@@ -18,6 +18,7 @@
- #include <linux/interrupt.h>
- #include <linux/ioport.h>
- #include <linux/pci.h>
-+#include <linux/isdn_compat.h>
- #include <linux/capi.h>
- #include <linux/init.h>
- #include <asm/io.h>
-@@ -26,19 +27,21 @@
- #include "capilli.h"
- #include "avmcard.h"
- 
--static char *revision = "$Revision: 1.1.4.1 $";
-+static char *revision = "$Revision: 1.25 $";
- 
- #undef CONFIG_T1PCI_DEBUG
- #undef CONFIG_T1PCI_POLLDEBUG
- 
- /* ------------------------------------------------------------- */
- 
-+#ifndef COMPAT_HAS_2_2_PCI
- static struct pci_device_id t1pci_pci_tbl[] __initdata = {
- 	{ PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_T1, PCI_ANY_ID, PCI_ANY_ID },
- 	{ }				/* Terminating entry */
- };
- 
- MODULE_DEVICE_TABLE(pci, t1pci_pci_tbl);
-+#endif
- MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM T1 PCI card");
- MODULE_AUTHOR("Carsten Paeth");
- MODULE_LICENSE("GPL");
-@@ -264,9 +267,9 @@
- 		}
- 		pci_set_master(dev);
- 
--		param.port = pci_resource_start(dev, 1);
-+		param.port = pci_resource_start_io(dev, 1);
-  		param.irq = dev->irq;
--		param.membase = pci_resource_start(dev, 0);
-+		param.membase = pci_resource_start_mem(dev, 0);
- 
- 		printk(KERN_INFO
- 			"%s: PCI BIOS reports AVM-T1-PCI at i/o %#x, irq %d, mem %#x\n",
-diff -rNu linux-2.4.29.old/drivers/isdn/divert/divert_procfs.c linux-2.4.29/drivers/isdn/divert/divert_procfs.c
---- linux-2.4.29.old/drivers/isdn/divert/divert_procfs.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/divert/divert_procfs.c	2005-03-22 15:06:45.158227688 +0100
-@@ -1,4 +1,4 @@
--/* $Id: divert_procfs.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id$
-  *
-  * Filesystem handling for the diversion supplementary services.
-  *
-@@ -14,13 +14,16 @@
- #include <linux/module.h>
- #include <linux/version.h>
- #include <linux/poll.h>
-+#ifndef COMPAT_USE_MODCOUNT_LOCK
- #include <linux/smp_lock.h>
-+#endif
- #ifdef CONFIG_PROC_FS
- #include <linux/proc_fs.h>
- #else
- #include <linux/fs.h>
- #endif
- #include <linux/isdnif.h>
-+#include <linux/isdn_compat.h>
- #include "isdn_divert.h"
- 
- /*********************************/
-@@ -80,7 +83,6 @@
- isdn_divert_read(struct file *file, char *buf, size_t count, loff_t * off)
- {
- 	struct divert_info *inf;
--	loff_t pos = *off;
- 	int len;
- 
- 	if (!*((struct divert_info **) file->private_data)) {
-@@ -92,11 +94,11 @@
- 		return (0);
- 
- 	inf->usage_cnt--;	/* new usage count */
--	file->private_data = &inf->next;	/* next structure */
-+	(struct divert_info **) file->private_data = &inf->next;	/* next structure */
- 	if ((len = strlen(inf->info_start)) <= count) {
- 		if (copy_to_user(buf, inf->info_start, len))
- 			return -EFAULT;
--		*off = pos + len;
-+		file->f_pos += len;
- 		return (len);
- 	}
- 	return (0);
-@@ -136,17 +138,23 @@
- {
- 	unsigned long flags;
- 
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+	MOD_INC_USE_COUNT;
-+#else
- 	lock_kernel();
-+#endif
- 	save_flags(flags);
- 	cli();
- 	if_used++;
- 	if (divert_info_head)
--		filep->private_data = &(divert_info_tail->next);
-+		(struct divert_info **) filep->private_data = &(divert_info_tail->next);
- 	else
--		filep->private_data = &divert_info_head;
-+		(struct divert_info **) filep->private_data = &divert_info_head;
- 	restore_flags(flags);
- 	/*  start_divert(); */
-+#ifndef COMPAT_USE_MODCOUNT_LOCK
- 	unlock_kernel();
-+#endif
- 	return (0);
- }				/* isdn_divert_open */
- 
-@@ -159,7 +167,9 @@
- 	struct divert_info *inf;
- 	unsigned long flags;
- 
-+#ifndef COMPAT_USE_MODCOUNT_LOCK
- 	lock_kernel();
-+#endif
- 	save_flags(flags);
- 	cli();
- 	if_used--;
-@@ -175,7 +185,11 @@
- 			divert_info_head = divert_info_head->next;
- 			kfree(inf);
- 		}
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+	MOD_DEC_USE_COUNT;
-+#else
- 	unlock_kernel();
-+#endif
- 	return (0);
- }				/* isdn_divert_close */
- 
-@@ -276,6 +290,9 @@
- 	open:           isdn_divert_open,
- 	release:        isdn_divert_close,                                      
- };
-+#ifdef COMPAT_NO_SOFTNET
-+struct inode_operations divert_file_inode_operations;
-+#endif
- 
- /****************************/
- /* isdn subdir in /proc/net */
-@@ -302,8 +319,16 @@
- 		remove_proc_entry("isdn", proc_net);
- 		return (-1);
- 	}
-+#ifdef COMPAT_NO_SOFTNET
-+	memset(&divert_file_inode_operations, 0, sizeof(struct inode_operations));
-+	divert_file_inode_operations.default_file_ops = &isdn_fops;
-+	isdn_divert_entry->ops = &divert_file_inode_operations;
-+#else
- 	isdn_divert_entry->proc_fops = &isdn_fops; 
-+#ifdef COMPAT_HAS_FILEOP_OWNER
- 	isdn_divert_entry->owner = THIS_MODULE; 
-+#endif
-+#endif  /* COMPAT_NO_SOFTNET */
- #endif	/* CONFIG_PROC_FS */
- 
- 	return (0);
-diff -rNu linux-2.4.29.old/drivers/isdn/divert/isdn_divert.c linux-2.4.29/drivers/isdn/divert/isdn_divert.c
---- linux-2.4.29.old/drivers/isdn/divert/isdn_divert.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/divert/isdn_divert.c	2005-03-22 15:06:45.173225408 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_divert.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id$
-  *
-  * DSS1 main diversion supplementary handling for i4l.
-  *
-@@ -84,6 +84,9 @@
-        restore_flags(flags); 
-        break;
- 
-+     case NETWORK_DIAL:
-+       divert_if.dial_net_name(cs->deflect_dest);  
-+
-      case DEFLECT_AUTODEL:
-      default:
-        save_flags(flags);
-@@ -452,6 +455,7 @@
-          case DEFLECT_PROCEED:
-          case DEFLECT_REPORT:
-          case DEFLECT_REJECT:
-+         case NETWORK_DIAL:
-            if (dv->rule.action == DEFLECT_PROCEED)
- 	    if ((!if_used) || ((!extern_wait_max) && (!dv->rule.waittime))) 
-               return(0); /* no external deflection needed */  
-@@ -495,6 +499,11 @@
-            else
-              { cs->deflect_dest[0] = '\0';
- 	       retval = 4; /* only proceed */
-+	       if (cs->akt_state == NETWORK_DIAL) {
-+		 strcpy(cs->deflect_dest,dv->rule.to_nr);
-+		 cs->timer.expires = jiffies + 10;
-+		 retval = 0;
-+	       }
-              }  
-            sprintf(cs->info,"%d 0x%lx %s %s %s %s 0x%x 0x%x %d %d %s\n",
-                    cs->akt_state,
-@@ -739,6 +748,18 @@
-                       } 
- 
- 
-+#if 0
-+  sprintf(st, "0x%lx 0x%lx",ic->arg, ic->parm.dss1_io.ll_id);
-+  p = st + strlen(st);
-+  p1 = ic->parm.dss1_io.data;
-+  i = ic->parm.dss1_io.datalen;
-+  while ((i > 0) && (p - st < 530))
-+   { p += sprintf(p," %02x",(*p1++) & 0xFF);
-+     i--;
-+   }
-+  sprintf(p, "\n");
-+  put_info_buffer(st);
-+#endif
-                    break;
-  
- 		   default:
-diff -rNu linux-2.4.29.old/drivers/isdn/divert/isdn_divert.h linux-2.4.29/drivers/isdn/divert/isdn_divert.h
---- linux-2.4.29.old/drivers/isdn/divert/isdn_divert.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/divert/isdn_divert.h	2005-03-22 15:06:45.189222976 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_divert.h,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id$
-  *
-  * Header for the diversion supplementary ioctl interface.
-  *
-@@ -36,9 +36,10 @@
- #define DEFLECT_PROCEED   2  /* deflect when externally triggered */
- #define DEFLECT_ALERT     3  /* alert and deflect after delay */ 
- #define DEFLECT_REJECT    4  /* reject immediately */
--#define DIVERT_ACTIVATE   5  /* diversion activate */
--#define DIVERT_DEACTIVATE 6  /* diversion deactivate */
--#define DIVERT_REPORT     7  /* interrogation result */ 
-+#define NETWORK_DIAL      5  /* dial a network interface */
-+#define DIVERT_ACTIVATE   16 /* diversion activate */
-+#define DIVERT_DEACTIVATE 17 /* diversion deactivate */
-+#define DIVERT_REPORT     18 /* interrogation result */ 
- #define DEFLECT_AUTODEL 255  /* only for internal use */ 
- 
- #define DEFLECT_ALL_IDS   0xFFFFFFFF /* all drivers selected */
-@@ -60,6 +61,7 @@
-                        2 = report call, send proceed, wait max waittime secs
-                        3 = report call, alert and deflect after waittime 
-                        4 = report call, reject immediately  
-+                       5 = dial net interface specified in to_nr  
-                        actions 1-2 only take place if interface is opened 
- 		    */
-    u_char waittime; /* maximum wait time for proceeding */ 
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/Divas_mod.c linux-2.4.29/drivers/isdn/eicon/Divas_mod.c
---- linux-2.4.29.old/drivers/isdn/eicon/Divas_mod.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/Divas_mod.c	2005-03-22 15:06:45.229216896 +0100
-@@ -20,6 +20,7 @@
- #include "adapter.h"
- #include "uxio.h"
- 
-+#include <linux/isdn_compat.h>
- 
- MODULE_DESCRIPTION("ISDN4Linux: Driver for Eicon Diva Server cards");
- MODULE_AUTHOR("Armin Schindler");
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/common.c linux-2.4.29/drivers/isdn/eicon/common.c
---- linux-2.4.29.old/drivers/isdn/eicon/common.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/common.c	2005-03-22 15:06:45.301205952 +0100
-@@ -808,9 +808,7 @@
- 	
- 	while(i--)
- 	{
--            if (card->state == DIA_RUNNING)
--		DivaDoCardDpc(card);
--            card++;
-+		DivaDoCardDpc(card++);
- 	}
- }
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/eicon.h linux-2.4.29/drivers/isdn/eicon/eicon.h
---- linux-2.4.29.old/drivers/isdn/eicon/eicon.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/eicon.h	2005-03-22 15:06:45.371195312 +0100
-@@ -1,4 +1,4 @@
--/* $Id: eicon.h,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: eicon.h,v 1.26 2001/09/24 13:22:47 kai Exp $
-  *
-  * ISDN low-level module for Eicon active ISDN-Cards.
-  *
-@@ -348,19 +348,19 @@
- extern char *eicon_ctype_name[];
- 
- 
--static inline void eicon_schedule_tx(eicon_card *card)
-+extern __inline__ void eicon_schedule_tx(eicon_card *card)
- {
-         queue_task(&card->snd_tq, &tq_immediate);
-         mark_bh(IMMEDIATE_BH);
- }
- 
--static inline void eicon_schedule_rx(eicon_card *card)
-+extern __inline__ void eicon_schedule_rx(eicon_card *card)
- {
-         queue_task(&card->rcv_tq, &tq_immediate);
-         mark_bh(IMMEDIATE_BH);
- }
- 
--static inline void eicon_schedule_ack(eicon_card *card)
-+extern __inline__ void eicon_schedule_ack(eicon_card *card)
- {
-         queue_task(&card->ack_tq, &tq_immediate);
-         mark_bh(IMMEDIATE_BH);
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/eicon_dsp.h linux-2.4.29/drivers/isdn/eicon/eicon_dsp.h
---- linux-2.4.29.old/drivers/isdn/eicon/eicon_dsp.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/eicon_dsp.h	2005-03-22 15:06:45.386193032 +0100
-@@ -1,4 +1,4 @@
--/* $Id: eicon_dsp.h,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: eicon_dsp.h,v 1.8 2001/09/24 13:22:47 kai Exp $
-  *
-  * ISDN lowlevel-module for Eicon active cards.
-  * DSP definitions
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/eicon_idi.c linux-2.4.29/drivers/isdn/eicon/eicon_idi.c
---- linux-2.4.29.old/drivers/isdn/eicon/eicon_idi.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/eicon_idi.c	2005-03-22 15:06:45.421187712 +0100
-@@ -1,4 +1,4 @@
--/* $Id: eicon_idi.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: eicon_idi.c,v 1.45 2001/11/07 22:35:48 kai Exp $
-  *
-  * ISDN lowlevel-module for Eicon active cards.
-  * IDI interface 
-@@ -25,7 +25,7 @@
- 
- #undef EICON_FULL_SERVICE_OKTETT
- 
--char *eicon_idi_revision = "$Revision: 1.1.4.1 $";
-+char *eicon_idi_revision = "$Revision: 1.45 $";
- 
- eicon_manifbuf *manbuf;
- 
-@@ -1583,6 +1583,37 @@
- 		return;
- 	}
- 
-+#if 0 
-+	eicon_sff_dochead *doc = (eicon_sff_dochead *)skb->data;
-+	eicon_sff_pagehead *page = (eicon_sff_pagehead *)skb->data + sizeof(eicon_sff_dochead);
-+
-+	printk(KERN_DEBUG"SFF: doc %d / page %d (skb : %d)\n", 
-+		sizeof(eicon_sff_dochead), 
-+		sizeof(eicon_sff_pagehead), skb->len);
-+
-+	if (skb->len >= sizeof(eicon_sff_dochead)) {
-+		printk(KERN_DEBUG"SFF: id = 0x%x\n", doc->id);
-+		printk(KERN_DEBUG"SFF: version = 0x%x\n", doc->version);
-+		printk(KERN_DEBUG"SFF: reserved1 = 0x%x\n", doc->reserved1);
-+		printk(KERN_DEBUG"SFF: userinfo = 0x%x\n", doc->userinfo);
-+		printk(KERN_DEBUG"SFF: pagecount = 0x%x\n", doc->pagecount);
-+		printk(KERN_DEBUG"SFF: off1pagehead = 0x%x\n", doc->off1pagehead);
-+		printk(KERN_DEBUG"SFF: offnpagehead = 0x%x\n", doc->offnpagehead);
-+		printk(KERN_DEBUG"SFF: offdocend = 0x%x\n", doc->offdocend);
-+	}
-+	if (skb->len >= (sizeof(eicon_sff_dochead) + sizeof(eicon_sff_pagehead))) {
-+		printk(KERN_DEBUG"SFFp: id = 0x%x\n", page->pageheadid);
-+		printk(KERN_DEBUG"SFFp: len = 0x%x\n", page->pageheadlen);
-+		printk(KERN_DEBUG"SFFp: resvert = 0x%x\n", page->resvert);
-+		printk(KERN_DEBUG"SFFp: reshoriz = 0x%x\n", page->reshoriz);
-+		printk(KERN_DEBUG"SFFp: coding = 0x%x\n", page->coding);
-+		printk(KERN_DEBUG"SFFp: reserved2 = 0x%x\n", page->reserved2);
-+		printk(KERN_DEBUG"SFFp: linelength = 0x%x\n", page->linelength);
-+		printk(KERN_DEBUG"SFFp: pagelength = 0x%x\n", page->pagelength);
-+		printk(KERN_DEBUG"SFFp: offprevpage = 0x%x\n", page->offprevpage);
-+		printk(KERN_DEBUG"SFFp: offnextpage = 0x%x\n", page->offnextpage);
-+	}
-+#endif
- 
- 	
- 	if (chan->fax->direction == ISDN_TTY_FAX_CONN_IN) {
-@@ -2054,8 +2085,7 @@
- 				OutBuf.Len++;
- 			} else {
- 				*OutBuf.Next++ = 0;
--				*(__u16 *) OutBuf.Next = (__u16) LineBuf.Len;
--				OutBuf.Next += sizeof(__u16);
-+				*((__u16 *) OutBuf.Next)++ = (__u16) LineBuf.Len;
- 				OutBuf.Len += 3;
- 			}
- 			memcpy(OutBuf.Next, LineBuf.Data, LineBuf.Len);
-@@ -2385,6 +2415,12 @@
- 				} else {
- 					if (chan->e.B2Id)
- 						idi_do_req(ccard, chan, REMOVE, 1);
-+#if 0
-+					if (chan->e.D3Id) {
-+						idi_do_req(ccard, chan, REMOVE, 0);
-+						idi_do_req(ccard, chan, ASSIGN, 0);
-+					}
-+#endif
- 					chan->statectrl &= ~WAITING_FOR_HANGUP;
- 					chan->statectrl &= ~IN_HOLD;
- 					if (chan->statectrl & HAVE_CONN_REQ) {
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/eicon_idi.h linux-2.4.29/drivers/isdn/eicon/eicon_idi.h
---- linux-2.4.29.old/drivers/isdn/eicon/eicon_idi.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/eicon_idi.h	2005-03-22 15:06:45.437185280 +0100
-@@ -1,4 +1,4 @@
--/* $Id: eicon_idi.h,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: eicon_idi.h,v 1.12 2001/09/24 13:22:47 kai Exp $
-  *
-  * ISDN lowlevel-module for the Eicon active cards.
-  * IDI-Interface
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/eicon_io.c linux-2.4.29/drivers/isdn/eicon/eicon_io.c
---- linux-2.4.29.old/drivers/isdn/eicon/eicon_io.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/eicon_io.c	2005-03-22 15:06:45.453182848 +0100
-@@ -1,4 +1,4 @@
--/* $Id: eicon_io.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: eicon_io.c,v 1.15 2001/09/24 13:22:47 kai Exp $
-  *
-  * ISDN low-level module for Eicon active ISDN-Cards.
-  * Code for communicating with hardware.
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/eicon_isa.c linux-2.4.29/drivers/isdn/eicon/eicon_isa.c
---- linux-2.4.29.old/drivers/isdn/eicon/eicon_isa.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/eicon_isa.c	2005-03-22 15:06:45.469180416 +0100
-@@ -1,4 +1,4 @@
--/* $Id: eicon_isa.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: eicon_isa.c,v 1.18 2001/11/07 22:35:48 kai Exp $
-  *
-  * ISDN low-level module for Eicon active ISDN-Cards.
-  * Hardware-specific code for old ISA cards.
-@@ -20,7 +20,7 @@
- #define release_shmem release_region
- #define request_shmem request_region
- 
--char *eicon_isa_revision = "$Revision: 1.1.4.1 $";
-+char *eicon_isa_revision = "$Revision: 1.18 $";
- 
- #undef EICON_MCA_DEBUG
- 
-@@ -38,8 +38,12 @@
- static void
- eicon_isa_release_shmem(eicon_isa_card *card) {
- 	if (card->mvalid) {
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 		iounmap(card->shmem);
- 		release_mem_region(card->physmem, card->ramsize);
-+#else
-+		release_shmem((unsigned long)card->shmem, card->ramsize);
-+#endif
- 	}
- 	card->mvalid = 0;
- }
-@@ -94,12 +98,20 @@
- 			 Mem, Id);
- 		return -1;
- 	}
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 	if (check_mem_region(Mem, RAMSIZE)) {
-+#else
-+	if (check_shmem(Mem, RAMSIZE)) {
-+#endif
- 		printk(KERN_WARNING "eicon_isa_boot: memory at 0x%x already in use.\n", Mem);
- 		return -1;
- 	}
- 
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 	amem = (unsigned long) ioremap(Mem, RAMSIZE);
-+#else
-+	amem = (unsigned long) Mem;
-+#endif
-         writew(0x55aa, amem + 0x402);
-         if (readw(amem + 0x402) != 0x55aa) primary = 0;
- 	writew(0, amem + 0x402);
-@@ -109,12 +121,16 @@
- 	if (primary) {
- 		printk(KERN_INFO "Eicon: assuming pri card at 0x%x\n", Mem);
- 		writeb(0, amem + 0x3ffe);
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 		iounmap((unsigned char *)amem);
-+#endif
- 		return EICON_CTYPE_ISAPRI;
- 	} else {
- 		printk(KERN_INFO "Eicon: assuming bri card at 0x%x\n", Mem);
- 		writeb(0, amem + 0x400);
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 		iounmap((unsigned char *)amem);
-+#endif
- 		return EICON_CTYPE_ISABRI;
- 	}
- 	return -1;
-@@ -151,6 +167,7 @@
- 	else
- 		card->ramsize  = RAMSIZE;
- 
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 	if (check_mem_region(card->physmem, card->ramsize)) {
- 		printk(KERN_WARNING "eicon_isa_boot: memory at 0x%lx already in use.\n",
- 			card->physmem);
-@@ -159,6 +176,16 @@
- 	}
- 	request_mem_region(card->physmem, card->ramsize, "Eicon ISA ISDN");
- 	card->shmem = (eicon_isa_shmem *) ioremap(card->physmem, card->ramsize);
-+#else
-+	/* Register shmem */
-+	if (check_shmem((unsigned long)card->shmem, card->ramsize)) {
-+		printk(KERN_WARNING "eicon_isa_boot: memory at 0x%lx already in use.\n",
-+			(unsigned long)card->shmem);
-+		kfree(code);
-+		return -EBUSY;
-+	}
-+	request_shmem((unsigned long)card->shmem, card->ramsize, "Eicon ISA ISDN");
-+#endif
- #ifdef EICON_MCA_DEBUG
- 	printk(KERN_INFO "eicon_isa_boot: card->ramsize = %d.\n", card->ramsize);
- #endif
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/eicon_isa.h linux-2.4.29/drivers/isdn/eicon/eicon_isa.h
---- linux-2.4.29.old/drivers/isdn/eicon/eicon_isa.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/eicon_isa.h	2005-03-22 15:06:45.485177984 +0100
-@@ -1,4 +1,4 @@
--/* $Id: eicon_isa.h,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: eicon_isa.h,v 1.11 2001/09/24 13:22:47 kai Exp $
-  *
-  * ISDN low-level module for Eicon active ISDN-Cards.
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/eicon_mod.c linux-2.4.29/drivers/isdn/eicon/eicon_mod.c
---- linux-2.4.29.old/drivers/isdn/eicon/eicon_mod.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/eicon_mod.c	2005-03-22 15:06:45.505174944 +0100
-@@ -1,4 +1,4 @@
--/* $Id: eicon_mod.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: eicon_mod.c,v 1.44 2001/11/20 09:48:25 armin Exp $
-  *
-  * ISDN lowlevel-module for Eicon active cards.
-  * 
-@@ -44,7 +44,7 @@
- static eicon_card *cards = (eicon_card *) NULL;   /* glob. var , contains
-                                                      start of card-list   */
- 
--static char *eicon_revision = "$Revision: 1.1.4.1 $";
-+static char *eicon_revision = "$Revision: 1.44 $";
- 
- extern char *eicon_pci_revision;
- extern char *eicon_isa_revision;
-@@ -639,6 +639,18 @@
- static int
- if_writecmd(const u_char * buf, int len, int user, int id, int channel)
- {
-+#if 0
-+	/* Not yet used */
-+        eicon_card *card = eicon_findcard(id);
-+
-+        if (card) {
-+                if (!card->flags & EICON_FLAGS_RUNNING)
-+                        return (len);
-+                return (len);
-+        }
-+        printk(KERN_ERR
-+               "eicon: if_writecmd called with invalid driverId!\n");
-+#endif
-         return (len);
- }
- 
-@@ -665,11 +677,8 @@
- 			else
- 				cnt = skb->len;
- 
--			if (user) {
--				spin_unlock_irqrestore(&eicon_lock, flags);
-+			if (user)
- 				copy_to_user(p, skb->data, cnt);
--				spin_lock_irqsave(&eicon_lock, flags);
--			}
- 			else
- 				memcpy(p, skb->data, cnt);
- 
-@@ -1459,6 +1468,7 @@
- 
- #ifndef MODULE
- 
-+#ifdef COMPAT_HAS_NEW_SETUP
- static int __init
- eicon_setup(char *line)
- {
-@@ -1467,6 +1477,12 @@
- 	char *str;
- 
- 	str = get_options(line, 4, ints);
-+#else
-+void
-+eicon_setup(char *str, int *ints)
-+{
-+        int i, argc;
-+#endif
- 
-         argc = ints[0];
-         i = 1;
-@@ -1494,9 +1510,13 @@
- #else
- 	printk(KERN_INFO "Eicon ISDN active driver setup\n");
- #endif
-+#ifdef COMPAT_HAS_NEW_SETUP
- 	return(1);
- }
- __setup("eicon=", eicon_setup);
-+#else
-+}
-+#endif
- 
- #endif /* MODULE */
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/eicon_pci.c linux-2.4.29/drivers/isdn/eicon/eicon_pci.c
---- linux-2.4.29.old/drivers/isdn/eicon/eicon_pci.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/eicon_pci.c	2005-03-22 15:06:45.522172360 +0100
-@@ -1,4 +1,4 @@
--/* $Id: eicon_pci.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: eicon_pci.c,v 1.18 2001/09/24 13:22:47 kai Exp $
-  *
-  * ISDN low-level module for Eicon active ISDN-Cards.
-  * Hardware-specific code for PCI cards.
-@@ -24,7 +24,7 @@
- #include "adapter.h"
- #include "uxio.h"
- 
--char *eicon_pci_revision = "$Revision: 1.1.4.1 $";
-+char *eicon_pci_revision = "$Revision: 1.18 $";
- 
- #if CONFIG_PCI	         /* intire stuff is only for PCI */
- #ifdef CONFIG_ISDN_DRV_EICON_PCI
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/eicon_pci.h linux-2.4.29/drivers/isdn/eicon/eicon_pci.h
---- linux-2.4.29.old/drivers/isdn/eicon/eicon_pci.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/eicon_pci.h	2005-03-22 15:06:45.538169928 +0100
-@@ -1,4 +1,4 @@
--/* $Id: eicon_pci.h,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: eicon_pci.h,v 1.7 2001/09/24 13:22:47 kai Exp $
-  *
-  * ISDN low-level module for Eicon active ISDN-Cards (PCI part).
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/fourbri.c linux-2.4.29/drivers/isdn/eicon/fourbri.c
---- linux-2.4.29.old/drivers/isdn/eicon/fourbri.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/fourbri.c	2005-03-22 15:06:45.553167648 +0100
-@@ -337,8 +337,7 @@
- static int diva_server_4bri_start(card_t *card, byte *channels)
- {
- 	byte *ctl;
--	byte *shared;
--	int i;
-+	byte *shared, i;
- 	int adapter_num;
- 
- 	DPRINTF(("divas: start Diva Server 4BRI"));
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/kprintf.c linux-2.4.29/drivers/isdn/eicon/kprintf.c
---- linux-2.4.29.old/drivers/isdn/eicon/kprintf.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/kprintf.c	2005-03-22 15:06:45.601160352 +0100
-@@ -18,6 +18,468 @@
- #include "divalog.h"
- #include "uxio.h"
- 
-+/*
-+ * Implementation of printf and sprintf for kernel
-+ */
-+
-+#define MAX_BUFF    (80)        /* limit size of temporary buffers */
-+
-+#define WRITE_CHAR(BUFFER, SIZE, C) \
-+  if (--(SIZE) < 0) { (BUFFER)--; *(BUFFER) = '\0'; return; } *(BUFFER)++ = (C)
-+
-+
-+/*
-+ * convert a number to decimal ASCII
-+ */
-+
-+static
-+void    do_decimal( char            *temp,
-+                    int             temp_len,
-+                    unsigned int    value,
-+                    char            *s)
-+
-+{
-+    int     i;
-+
-+    temp[0] = '\0';
-+
-+    for (i = 1; i < temp_len; i++)
-+    {
-+        temp[i] = (char) ((value % 10) + (int) '0');
-+        value /= 10;
-+    }
-+
-+    for (i = (temp_len - 1); temp[i] == '0'; i--)
-+    {
-+        ;
-+    }
-+
-+    if (i == 0)
-+    {
-+        i++;
-+    }
-+
-+    while (i >= 0)
-+    {
-+        *s++ = temp[i--];
-+    }
-+
-+    return;
-+}
-+
-+/*
-+ * convert a number to octal ASCII
-+ */
-+
-+static
-+void    do_octal(   char            *temp,
-+                    unsigned int    value,
-+                    char            *s)
-+
-+{
-+    int     i;
-+
-+    temp[0] = '\0';
-+
-+    for (i = 1; i <= 11; i++)
-+    {
-+        temp[i] = (char) ((value & 07) + (int) '0');
-+        value >>= 3;
-+    }
-+    temp[11] &= '3';
-+
-+    for (i = 11; temp[i] == '0'; i--)
-+    {
-+        ;
-+    }
-+
-+    if (i == 0)
-+    {
-+        i++;
-+    }
-+
-+    while (i >= 0)
-+    {
-+        *s++ = temp[i--];
-+    }
-+
-+    return;
-+}
-+
-+/*
-+ * convert a number to hex ASCII
-+ */
-+
-+static
-+void    do_hex( char            *temp,
-+                unsigned int    value,
-+                char            *s)
-+
-+{
-+    int     i;
-+    static
-+    char    *dec_to_hex = "0123456789abcdef";
-+
-+    temp[0] = '\0';
-+
-+    for (i = 1; i <= 8; i++)
-+    {
-+        temp[i] = dec_to_hex[value & 0x0f];
-+        value >>= 4;
-+    }
-+
-+    for (i = 8; temp[i] == '0'; i--)
-+    {
-+        ;
-+    }
-+
-+    if (i == 0)
-+    {
-+        i++;
-+    }
-+
-+    while (i >= 0)
-+    {
-+        *s++ = temp[i--];
-+    }
-+
-+    return;
-+}
-+
-+/*
-+ * convert a buffer to ASCII HEX
-+ */
-+
-+static
-+void    do_buffer(  char    *buffer,
-+                    int     length,
-+                    char    *s)
-+
-+{
-+    static
-+    char    hex_char [] = "0123456789abcdef";
-+    char    *b = buffer;
-+    int     hex_byte;
-+    int     nybble;
-+
-+    length = (length >= ((MAX_BUFF / 3) + 1)) ? (MAX_BUFF / 3) : length;
-+
-+    while (length)
-+    {
-+        hex_byte = (int) *b++;
-+        nybble = (hex_byte >> 4) & 0xf;
-+        *s++ = hex_char[nybble];
-+        nybble = hex_byte & 0xf;
-+        *s++ = hex_char[nybble];
-+        *s++ = ' ';
-+        length--;
-+    }
-+    *s = '\0';
-+
-+    return;
-+}
-+
-+/*
-+ * Body of sprintf function: behaves just like standard sprintf, except we
-+ * have an extra argument (buffer size) which we use to ensure we don't
-+ * overflow
-+ */
-+
-+void    Divas_vsprintf(   char    *buffer,
-+                    int     size,
-+                    char    *fmt,
-+                    va_list argptr)
-+
-+{
-+    char        c;          /* single character buffer */
-+    int         i;          /* handy scratch counter */
-+    int         f;          /* format character (after %) */
-+    char        *str;       /* pointer into string */
-+    char        temp[20];   /* temp buffer used in printing numbers */
-+    char        string[MAX_BUFF]; /* output from number conversion */
-+    int         length;     /* length of string "str" */
-+    char        fill;       /* fill character ' ' or '0' */
-+    boolean_t   leftjust;   /* TRUE if left justified, else right justified */
-+    int         fmax, fmin; /* field specifiers % MIN . MAX s */
-+    int         leading;    /* number of leading/trailing fill characters */
-+    char        sign;       /* set to '-' for negative decimals */
-+    int         number;     /* numeric argument */
-+
-+    char        *buff_ptr;  /* pointer to user's buffer of hex data */
-+    int         buff_len;   /* length of hex data */
-+
-+    /* make sure we have somthing to write into */
-+
-+    if ((!buffer) || (size <= 0))
-+    {
-+        return;
-+    }
-+
-+    while (TRUE)
-+    {
-+        /* echo characters until end or '%' encountered */
-+
-+        while ((c = *fmt++) != '%')
-+        {
-+            if (!c)
-+            {
-+                *buffer = '\0';
-+                return;
-+            }
-+            WRITE_CHAR(buffer, size, c);
-+        }
-+
-+        /* echo %% as % */
-+
-+        if (*fmt == '%')
-+        {
-+            WRITE_CHAR(buffer, size, *fmt);
-+            continue;
-+        }
-+
-+        /* %- turns on left-justify */
-+
-+        if ((leftjust = (boolean_t) ((*fmt == '-') ? TRUE : FALSE)))
-+        {
-+            fmt++;
-+        }
-+
-+        /* %0 turns on zero filling */
-+
-+        if (*fmt == '0')
-+        {
-+            fill = '0';
-+        }
-+        else
-+        {
-+            fill = ' ';
-+        }
-+
-+        /* minium field width specifier for %d, u, x, c, s */
-+
-+        fmin = 0;
-+
-+        if (*fmt == '*')
-+        {
-+            fmin = va_arg(argptr, int);
-+            fmt++;
-+        }
-+        else
-+        {
-+            while ('0' <= *fmt && *fmt <= '9')
-+            {
-+                fmin = (fmin * 10) + (*fmt++ - '0');
-+            }
-+        }
-+
-+        /* maximum string width specifier for %s */
-+
-+        fmax = 0;
-+
-+        if (*fmt == '.')
-+        {
-+            if (*(++fmt) == '*')
-+            {
-+                fmax = va_arg(argptr, int);
-+                fmt++;
-+            }
-+            else
-+            {
-+                while ('0' <= *fmt && *fmt <= '9')
-+                {
-+                    fmax = (fmax * 10) + (*fmt++ - '0');
-+                }
-+            }
-+        }
-+
-+        /* skip over 'l' option (ints are assumed same size as longs) */
-+
-+        if (*fmt == 'l')
-+        {
-+            fmt++;
-+        }
-+
-+        /* get the format chacater */
-+
-+        if (!(f = *fmt++))
-+        {
-+            WRITE_CHAR(buffer, size, '%');
-+            *buffer = '\0';
-+            return;
-+        }
-+
-+        sign = '\0';        /* sign == '-' for negative decimal */
-+
-+        str = string;
-+
-+        switch (f)
-+        {
-+        case 'c' :
-+            string[0] = (char) va_arg(argptr, int);
-+            string[1] = '\0';
-+            fmax = 0;
-+            fill = ' ';
-+            break;
-+
-+        case 's' :
-+            str = va_arg(argptr, char *);
-+            fill = ' ';
-+            break;
-+
-+        case 'D' :
-+        case 'd' :
-+            number = va_arg(argptr, int);
-+            if (number < 0)
-+            {
-+                sign = '-';
-+                number = -number;
-+            }
-+            do_decimal(temp, DIM(temp), (unsigned int) number, str);
-+            fmax = 0;
-+            break;
-+
-+        case 'U' :
-+        case 'u' :
-+            number = va_arg(argptr, int);
-+            do_decimal(temp, DIM(temp), (unsigned int) number, str);
-+            fmax = 0;
-+            break;
-+
-+        case 'O' :
-+        case 'o' :
-+            number = va_arg(argptr, int);
-+            do_octal(temp, (unsigned int) number, str);
-+            fmax = 0;
-+            break;
-+
-+        case 'X' :
-+        case 'x' :
-+            number = va_arg(argptr, int);
-+            do_hex(temp, (unsigned int) number, str);
-+            fmax = 0;
-+            break;
-+
-+        case 'H' :
-+        case 'h' :
-+            buff_ptr = va_arg(argptr, char *);
-+            buff_len = va_arg(argptr, int);
-+            do_buffer(buff_ptr, buff_len, str);
-+            fmax = 0;
-+            break;
-+
-+        default :
-+            WRITE_CHAR(buffer, size, ((char) f));
-+            break;
-+        }
-+
-+        /* get the length of the string */
-+
-+        length = 0;
-+        while (str[length])
-+        {
-+            length++;
-+        }
-+
-+        /* make sure we have fmax and fmin values that are O.K. */
-+
-+        if (fmin > DIM(string) || fmin < 0)
-+        {
-+            fmin = 0;
-+        }
-+
-+        if (fmax > DIM(string) || fmax < 0)
-+        {
-+            fmax = 0;
-+        }
-+
-+        /* figure out how many leading characters thare are */
-+
-+        leading = 0;
-+
-+        if (fmax || fmin)
-+        {
-+            if (fmax)
-+            {
-+                if (length > fmax)
-+                {
-+                    length = fmax;
-+                }
-+            }
-+
-+            if (fmin)
-+            {
-+                leading = fmin - length;
-+            }
-+
-+            if (sign == '-')
-+            {
-+                leading--;
-+            }
-+        }
-+
-+        /* output sign now, if fill is numeric */
-+
-+        if (sign == '-' && fill == '0')
-+        {
-+            WRITE_CHAR(buffer, size, '-');
-+        }
-+
-+        /* if right justified, output fill characters */
-+
-+        if (!leftjust)
-+        {
-+            for (i = 0; i < leading; i++)
-+            {
-+                WRITE_CHAR(buffer, size, fill);
-+            }
-+        }
-+
-+        /* output sign now, if fill is spaces */
-+
-+        if (sign == '-' && fill == ' ')
-+        {
-+            WRITE_CHAR(buffer, size, '-');
-+        }
-+
-+        /* now the actual value */
-+
-+        for (i = 0; i < length; i++)
-+        {
-+            WRITE_CHAR(buffer, size, str[i]);
-+        }
-+
-+        /* if left justified, fill out with the fill character */
-+
-+        if (leftjust)
-+        {
-+            for (i = 0; i < leading; i++)
-+            {
-+                WRITE_CHAR(buffer, size, fill);
-+            }
-+        }
-+    }
-+}
-+
-+/*
-+ * sprintf for kernel
-+ *
-+ * call our vsprintf assuming user has a big buffer....
-+ */
-+
-+void    DivasSprintf(char *buffer, char *fmt, ...)
-+
-+{
-+    va_list     argptr;         /* pointer to additional args */
-+
-+    va_start(argptr, fmt);
-+
-+    Divas_vsprintf(buffer, 1024, fmt, argptr);
-+
-+    va_end(argptr);
-+
-+    return;
-+}
-+
- void    DivasPrintf(char  *fmt, ...)
- 
- {
-@@ -40,7 +502,7 @@
- 
-     /* call vsprintf to format the user's information */
- 
--    vsnprintf(log.buffer, DIM(log.buffer), fmt, argptr);
-+    Divas_vsprintf(log.buffer, DIM(log.buffer), fmt, argptr);
- 
-     va_end(argptr);
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/lincfg.c linux-2.4.29/drivers/isdn/eicon/lincfg.c
---- linux-2.4.29.old/drivers/isdn/eicon/lincfg.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/lincfg.c	2005-03-22 15:06:45.620157464 +0100
-@@ -26,6 +26,9 @@
- #include "uxio.h"
- 
- #include <linux/pci.h>
-+#ifndef COMPAT_HAS_2_2_PCI
-+#include <linux/pci_ids.h>
-+#endif
- #include <linux/kernel.h>
- #include <linux/ioport.h>
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/linchr.c linux-2.4.29/drivers/isdn/eicon/linchr.c
---- linux-2.4.29.old/drivers/isdn/eicon/linchr.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/linchr.c	2005-03-22 15:06:45.635155184 +0100
-@@ -154,17 +154,17 @@
- 	klog_t *pHeadItem;
- 
- 	if (BufferSize < sizeof(klog_t))
-+	{
-+		printk(KERN_WARNING "Divas: Divalog buffer specifed a size that is too small (%d - %d required)\n",
-+			BufferSize, sizeof(klog_t));
- 		return -EIO;
-+	}
- 
- 	pHeadItem = (klog_t *) DivasLogFifoRead();
- 
- 	if (pHeadItem)
- 	{
--		if(copy_to_user(pClientLogBuffer, pHeadItem, sizeof(klog_t)))
--		{
--			kfree(pHeadItem);
--			return -EFAULT;
--		}
-+		memcpy(pClientLogBuffer, pHeadItem, sizeof(klog_t));
- 		kfree(pHeadItem);
- 		return sizeof(klog_t);
- 	}
-diff -rNu linux-2.4.29.old/drivers/isdn/eicon/linio.c linux-2.4.29/drivers/isdn/eicon/linio.c
---- linux-2.4.29.old/drivers/isdn/eicon/linio.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/eicon/linio.c	2005-03-22 15:06:45.651152752 +0100
-@@ -15,6 +15,7 @@
- #include <linux/slab.h>
- #include <linux/pci.h>
- #include <linux/delay.h>
-+#include <linux/isdn_compat.h>
- #undef N_DATA
- 
- #include "uxio.h"
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/Makefile linux-2.4.29/drivers/isdn/hisax/Makefile
---- linux-2.4.29.old/drivers/isdn/hisax/Makefile	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/Makefile	2005-03-22 15:06:45.819127216 +0100
-@@ -4,20 +4,17 @@
- 
- O_TARGET	  := vmlinux-obj.o
- 
--# Define maximum number of cards
--
--EXTRA_CFLAGS      += -DHISAX_MAX_CARDS=$(CONFIG_HISAX_MAX_CARDS)
--
- # Objects that export symbols.
- 
--export-objs	  := config.o hisax_isac.o isdnhdlc.o
-+export-objs	  := config.o fsm.o hisax_isac.o
- 
- # Multipart objects.
- 
- list-multi	  := hisax.o hisax_st5481.o
- hisax-objs	  := config.o isdnl1.o tei.o isdnl2.o isdnl3.o \
- 		     lmgr.o q931.o callc.o fsm.o cert.o
--hisax_st5481-objs := st5481_init.o st5481_usb.o st5481_d.o st5481_b.o
-+hisax_st5481-objs := st5481_init.o st5481_usb.o st5481_d.o st5481_b.o \
-+		     st5481_hdlc.o
- 
- # Optional parts of multipart objects.
- hisax-objs-$(CONFIG_HISAX_EURO) += l3dss1.o
-@@ -33,7 +30,7 @@
- hisax-objs-$(CONFIG_HISAX_FRITZPCI) += avm_pci.o isac.o arcofi.o
- hisax-objs-$(CONFIG_HISAX_ELSA) += elsa.o isac.o arcofi.o hscx.o
- hisax-objs-$(CONFIG_HISAX_IX1MICROR2) += ix1_micro.o isac.o arcofi.o hscx.o
--hisax-objs-$(CONFIG_HISAX_DIEHLDIVA) += diva.o isac.o arcofi.o hscx.o ipacx.o
-+hisax-objs-$(CONFIG_HISAX_DIEHLDIVA) += diva.o isac.o arcofi.o hscx.o
- hisax-objs-$(CONFIG_HISAX_ASUSCOM) += asuscom.o isac.o arcofi.o hscx.o
- hisax-objs-$(CONFIG_HISAX_TELEINT) += teleint.o isac.o arcofi.o hfc_2bs0.o
- hisax-objs-$(CONFIG_HISAX_SEDLBAUER) += sedlbauer.o isac.o arcofi.o hscx.o isar.o
-@@ -44,6 +41,7 @@
- hisax-objs-$(CONFIG_HISAX_HFCS) += hfcscard.o hfc_2bds0.o
- hisax-objs-$(CONFIG_HISAX_HFC_PCI) += hfc_pci.o
- hisax-objs-$(CONFIG_HISAX_HFC_SX) += hfc_sx.o
-+hisax-objs-$(CONFIG_HISAX_HFC_USB) += hfc_usbr.o
- hisax-objs-$(CONFIG_HISAX_NICCY) += niccy.o isac.o arcofi.o hscx.o
- hisax-objs-$(CONFIG_HISAX_ISURF) += isurf.o isac.o arcofi.o isar.o
- hisax-objs-$(CONFIG_HISAX_HSTSAPHIR) += saphir.o isac.o arcofi.o hscx.o
-@@ -51,7 +49,6 @@
- hisax-objs-$(CONFIG_HISAX_SCT_QUADRO) += bkm_a8.o isac.o arcofi.o hscx.o
- hisax-objs-$(CONFIG_HISAX_GAZEL) += gazel.o isac.o arcofi.o hscx.o
- hisax-objs-$(CONFIG_HISAX_W6692) += w6692.o
--hisax-objs-$(CONFIG_HISAX_ENTERNOW_PCI) += enternow_pci.o amd7930_fn.o
- #hisax-objs-$(CONFIG_HISAX_TESTEMU) += testemu.o
- 
- hisax-objs += $(sort $(hisax-objs-y))
-@@ -61,10 +58,9 @@
- obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax.o
- obj-$(CONFIG_HISAX_SEDLBAUER_CS)	+= sedlbauer_cs.o
- obj-$(CONFIG_HISAX_ELSA_CS)		+= elsa_cs.o
--obj-$(CONFIG_HISAX_AVM_A1_CS)		+= avma1_cs.o
--obj-$(CONFIG_HISAX_ST5481)		+= hisax_st5481.o isdnhdlc.o
--obj-$(CONFIG_HISAX_FRITZ_PCIPNP)        += hisax_isac.o hisax_fcpcipnp.o
--obj-$(CONFIG_USB_AUERISDN)	        += isdnhdlc.o
-+obj-$(CONFIG_HISAX_HFC_USB_CS)		+= hfc_usb.o
-+obj-$(CONFIG_HISAX_ST5481)		+= hisax_st5481.o
-+obj-$(CONFIG_HISAX_FRITZ_PCIPNP)        += hisax_fcpcipnp.o hisax_isac.o
- 
- CERT := $(shell md5sum -c md5sums.asc >> /dev/null;echo $$?)
- CFLAGS_cert.o := -DCERTIFICATION=$(CERT)
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/amd7930.c linux-2.4.29/drivers/isdn/hisax/amd7930.c
---- linux-2.4.29.old/drivers/isdn/hisax/amd7930.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/amd7930.c	2005-03-22 15:06:45.837124480 +0100
-@@ -0,0 +1,755 @@
-+/* $Id: amd7930.c,v 1.8 2001/09/24 13:22:55 kai Exp $
-+ *
-+ * HiSax ISDN driver - chip specific routines for AMD 7930
-+ *
-+ * Author       Brent Baccala
-+ * Copyright    by Brent Baccala <baccala@FreeSoft.org>
-+ *
-+ * This software may be used and distributed according to the terms
-+ * of the GNU General Public License, incorporated herein by reference.
-+ *
-+ *    - Existing ISDN HiSax driver provides all the smarts
-+ *    - it compiles, runs, talks to an isolated phone switch, connects
-+ *      to a Cisco, pings go through
-+ *    - AMD 7930 support only (no DBRI yet)
-+ *    - no US NI-1 support (may not work on US phone system - untested)
-+ *    - periodic packet loss, apparently due to lost interrupts
-+ *    - ISDN sometimes freezes, requiring reboot before it will work again
-+ *
-+ * The code is unreliable enough to be consider alpha
-+ *
-+ * This file is (c) under GNU General Public License
-+ *
-+ * Advanced Micro Devices' Am79C30A is an ISDN/audio chip used in the
-+ * SparcStation 1+.  The chip provides microphone and speaker interfaces
-+ * which provide mono-channel audio at 8K samples per second via either
-+ * 8-bit A-law or 8-bit mu-law encoding.  Also, the chip features an
-+ * ISDN BRI Line Interface Unit (LIU), I.430 S/T physical interface,
-+ * which performs basic D channel LAPD processing and provides raw
-+ * B channel data.  The digital audio channel, the two ISDN B channels,
-+ * and two 64 Kbps channels to the microprocessor are all interconnected
-+ * via a multiplexer.
-+ *
-+ * This driver interfaces to the Linux HiSax ISDN driver, which performs
-+ * all high-level Q.921 and Q.931 ISDN functions.  The file is not
-+ * itself a hardware driver; rather it uses functions exported by
-+ * the AMD7930 driver in the sparcaudio subsystem (drivers/sbus/audio),
-+ * allowing the chip to be simultaneously used for both audio and ISDN data.
-+ * The hardware driver does _no_ buffering, but provides several callbacks
-+ * which are called during interrupt service and should therefore run quickly.
-+ *
-+ * D channel transmission is performed by passing the hardware driver the
-+ * address and size of an skb's data area, then waiting for a callback
-+ * to signal successful transmission of the packet.  A task is then
-+ * queued to notify the HiSax driver that another packet may be transmitted.
-+ *
-+ * D channel reception is quite simple, mainly because of:
-+ *   1) the slow speed of the D channel - 16 kbps, and
-+ *   2) the presence of an 8- or 32-byte (depending on chip version) FIFO
-+ *      to buffer the D channel data on the chip
-+ * Worst case scenario of back-to-back packets with the 8 byte buffer
-+ * at 16 kbps yields an service time of 4 ms - long enough to preclude
-+ * the need for fancy buffering.  We queue a background task that copies
-+ * data out of the receive buffer into an skb, and the hardware driver
-+ * simply does nothing until we're done with the receive buffer and
-+ * reset it for a new packet.
-+ *
-+ * B channel processing is more complex, because of:
-+ *   1) the faster speed - 64 kbps,
-+ *   2) the lack of any on-chip buffering (it interrupts for every byte), and
-+ *   3) the lack of any chip support for HDLC encapsulation
-+ *
-+ * The HiSax driver can put each B channel into one of three modes -
-+ * L1_MODE_NULL (channel disabled), L1_MODE_TRANS (transparent data relay),
-+ * and L1_MODE_HDLC (HDLC encapsulation by low-level driver).
-+ * L1_MODE_HDLC is the most common, used for almost all "pure" digital
-+ * data sessions.  L1_MODE_TRANS is used for ISDN audio.
-+ *
-+ * HDLC B channel transmission is performed via a large buffer into
-+ * which the skb is copied while performing HDLC bit-stuffing.  A CRC
-+ * is computed and attached to the end of the buffer, which is then
-+ * passed to the low-level routines for raw transmission.  Once
-+ * transmission is complete, the hardware driver is set to enter HDLC
-+ * idle by successive transmission of mark (all 1) bytes, waiting for
-+ * the ISDN driver to prepare another packet for transmission and
-+ * deliver it.
-+ *
-+ * HDLC B channel reception is performed via an X-byte ring buffer
-+ * divided into N sections of X/N bytes each.  Defaults: X=256 bytes, N=4.
-+ * As the hardware driver notifies us that each section is full, we
-+ * hand it the next section and schedule a background task to peruse
-+ * the received section, bit-by-bit, with an HDLC decoder.  As
-+ * packets are detected, they are copied into a large buffer while
-+ * decoding HDLC bit-stuffing.  The ending CRC is verified, and if
-+ * it is correct, we alloc a new skb of the correct length (which we
-+ * now know), copy the packet into it, and hand it to the upper layers.
-+ * Optimization: for large packets, we hand the buffer (which also
-+ * happens to be an skb) directly to the upper layer after an skb_trim,
-+ * and alloc a new large buffer for future packets, thus avoiding a copy.
-+ * Then we return to HDLC processing; state is saved between calls.
-+ * 
-+ */
-+
-+#define __NO_VERSION__
-+#include "hisax.h"
-+#include "../../sbus/audio/amd7930.h"
-+#include "isac.h"
-+#include "isdnl1.h"
-+#include "rawhdlc.h"
-+#include <linux/interrupt.h>
-+
-+static const char *amd7930_revision = "$Revision: 1.8 $";
-+
-+#define RCV_BUFSIZE	1024	/* Size of raw receive buffer in bytes */
-+#define RCV_BUFBLKS	4	/* Number of blocks to divide buffer into
-+				 * (must divide RCV_BUFSIZE) */
-+
-+static void Bchan_fill_fifo(struct BCState *, struct sk_buff *);
-+
-+static void
-+Bchan_xmt_bh(struct BCState *bcs)
-+{
-+	struct sk_buff *skb;
-+
-+	if (bcs->hw.amd7930.tx_skb != NULL) {
-+		dev_kfree_skb(bcs->hw.amd7930.tx_skb);
-+		bcs->hw.amd7930.tx_skb = NULL;
-+	}
-+
-+	if ((skb = skb_dequeue(&bcs->squeue))) {
-+		Bchan_fill_fifo(bcs, skb);
-+	} else {
-+		clear_bit(BC_FLG_BUSY, &bcs->Flag);
-+		bcs->event |= 1 << B_XMTBUFREADY;
-+		queue_task(&bcs->tqueue, &tq_immediate);
-+		mark_bh(IMMEDIATE_BH);
-+	}
-+}
-+
-+static void
-+Bchan_xmit_callback(struct BCState *bcs)
-+{
-+	queue_task(&bcs->hw.amd7930.tq_xmt, &tq_immediate);
-+	mark_bh(IMMEDIATE_BH);
-+}
-+
-+/* B channel transmission: two modes (three, if you count L1_MODE_NULL)
-+ *
-+ * L1_MODE_HDLC - We need to do HDLC encapsulation before transmiting
-+ * the packet (i.e. make_raw_hdlc_data).  Since this can be a
-+ * time-consuming operation, our completion callback just schedules
-+ * a bottom half to do encapsulation for the next packet.  In between,
-+ * the link will just idle
-+ *
-+ * L1_MODE_TRANS - Data goes through, well, transparent.  No HDLC encap,
-+ * and we can't just let the link idle, so the "bottom half" actually
-+ * gets called during the top half (it's our callback routine in this case),
-+ * but it's a lot faster now since we don't call make_raw_hdlc_data
-+ */
-+
-+static void
-+Bchan_fill_fifo(struct BCState *bcs, struct sk_buff *skb)
-+{
-+	struct IsdnCardState *cs = bcs->cs;
-+	int len;
-+
-+	if ((cs->debug & L1_DEB_HSCX) || (cs->debug & L1_DEB_HSCX_FIFO)) {
-+		char tmp[1024];
-+		char *t = tmp;
-+
-+		t += sprintf(t, "amd7930_fill_fifo %c cnt %d",
-+			     bcs->channel ? 'B' : 'A', skb->len);
-+		if (cs->debug & L1_DEB_HSCX_FIFO)
-+			QuickHex(t, skb->data, skb->len);
-+		debugl1(cs, tmp);
-+	}
-+
-+	if (bcs->mode == L1_MODE_HDLC) {
-+		len = make_raw_hdlc_data(skb->data, skb->len,
-+					 bcs->hw.amd7930.tx_buff, RAW_BUFMAX);
-+		if (len > 0)
-+			amd7930_bxmit(0, bcs->channel,
-+				      bcs->hw.amd7930.tx_buff, len,
-+				      (void *) &Bchan_xmit_callback,
-+				      (void *) bcs);
-+		dev_kfree_skb(skb);
-+	} else if (bcs->mode == L1_MODE_TRANS) {
-+		amd7930_bxmit(0, bcs->channel,
-+			      bcs->hw.amd7930.tx_buff, skb->len,
-+			      (void *) &Bchan_xmt_bh,
-+			      (void *) bcs);
-+		bcs->hw.amd7930.tx_skb = skb;
-+	} else {
-+		dev_kfree_skb(skb);
-+	}
-+}
-+
-+static void
-+Bchan_mode(struct BCState *bcs, int mode, int bc)
-+{
-+	struct IsdnCardState *cs = bcs->cs;
-+
-+	if (cs->debug & L1_DEB_HSCX) {
-+		char tmp[40];
-+		sprintf(tmp, "AMD 7930 mode %d bchan %d/%d",
-+			mode, bc, bcs->channel);
-+		debugl1(cs, tmp);
-+	}
-+	bcs->mode = mode;
-+}
-+
-+/* Bchan_l2l1 is the entry point for upper layer routines that want to
-+ * transmit on the B channel.  PH_DATA_REQ is a normal packet that
-+ * we either start transmitting (if idle) or queue (if busy).
-+ * PH_PULL_REQ can be called to request a callback message (PH_PULL_CNF)
-+ * once the link is idle.  After a "pull" callback, the upper layer
-+ * routines can use PH_PULL_IND to send data.
-+ */
-+
-+static void
-+Bchan_l2l1(struct PStack *st, int pr, void *arg)
-+{
-+	struct sk_buff *skb = arg;
-+
-+	switch (pr) {
-+		case (PH_DATA_REQ):
-+			if (test_bit(BC_FLG_BUSY, &st->l1.bcs->Flag)) {
-+				skb_queue_tail(&st->l1.bcs->squeue, skb);
-+			} else {
-+				test_and_set_bit(BC_FLG_BUSY, &st->l1.bcs->Flag);
-+				Bchan_fill_fifo(st->l1.bcs, skb);
-+			}
-+			break;
-+		case (PH_PULL_IND):
-+			if (test_bit(BC_FLG_BUSY, &st->l1.bcs->Flag)) {
-+				printk(KERN_WARNING "amd7930: this shouldn't happen\n");
-+				break;
-+			}
-+			test_and_set_bit(BC_FLG_BUSY, &st->l1.bcs->Flag);
-+			Bchan_fill_fifo(st->l1.bcs, skb);
-+			break;
-+		case (PH_PULL_REQ):
-+			if (!test_bit(BC_FLG_BUSY, &st->l1.bcs->Flag)) {
-+				clear_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
-+				st->l1.l1l2(st, PH_PULL_CNF, NULL);
-+			} else
-+				set_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
-+			break;
-+	}
-+}
-+
-+/* Receiver callback and bottom half - decodes HDLC at leisure (if
-+ * L1_MODE_HDLC) and passes newly received skb on via bcs->rqueue.  If
-+ * a large packet is received, stick rv_skb (the buffer that the
-+ * packet has been decoded into) on the receive queue and alloc a new
-+ * (large) skb to act as buffer for future receives.  If a small
-+ * packet is received, leave rv_skb alone, alloc a new skb of the
-+ * correct size, and copy the packet into it
-+ */
-+
-+static void
-+Bchan_recv_callback(struct BCState *bcs)
-+{
-+	struct amd7930_hw *hw = &bcs->hw.amd7930;
-+
-+	hw->rv_buff_in += RCV_BUFSIZE/RCV_BUFBLKS;
-+	hw->rv_buff_in %= RCV_BUFSIZE;
-+
-+	if (hw->rv_buff_in != hw->rv_buff_out) {
-+		amd7930_brecv(0, bcs->channel,
-+			      hw->rv_buff + hw->rv_buff_in,
-+			      RCV_BUFSIZE/RCV_BUFBLKS,
-+			      (void *) &Bchan_recv_callback, (void *) bcs);
-+	}
-+
-+	queue_task(&hw->tq_rcv, &tq_immediate);
-+	mark_bh(IMMEDIATE_BH);
-+}
-+
-+static void
-+Bchan_rcv_bh(struct BCState *bcs)
-+{
-+	struct IsdnCardState *cs = bcs->cs;
-+	struct amd7930_hw *hw = &bcs->hw.amd7930;
-+	struct sk_buff *skb;
-+	int len;
-+
-+	if (cs->debug & L1_DEB_HSCX) {
-+		char tmp[1024];
-+
-+		sprintf(tmp, "amd7930_Bchan_rcv (%d/%d)",
-+			hw->rv_buff_in, hw->rv_buff_out);
-+		debugl1(cs, tmp);
-+		QuickHex(tmp, hw->rv_buff + hw->rv_buff_out,
-+			 RCV_BUFSIZE/RCV_BUFBLKS);
-+		debugl1(cs, tmp);
-+	}
-+
-+	do {
-+		if (bcs->mode == L1_MODE_HDLC) {
-+			while ((len = read_raw_hdlc_data(hw->hdlc_state,
-+							 hw->rv_buff + hw->rv_buff_out, RCV_BUFSIZE/RCV_BUFBLKS,
-+							 hw->rv_skb->tail, HSCX_BUFMAX))) {
-+				if (len > 0 && (cs->debug & L1_DEB_HSCX_FIFO)) {
-+					char tmp[1024];
-+					char *t = tmp;
-+
-+					t += sprintf(t, "amd7930_Bchan_rcv %c cnt %d", bcs->channel ? 'B' : 'A', len);
-+					QuickHex(t, hw->rv_skb->tail, len);
-+					debugl1(cs, tmp);
-+				}
-+
-+				if (len > HSCX_BUFMAX/2) {
-+					/* Large packet received */
-+
-+					if (!(skb = dev_alloc_skb(HSCX_BUFMAX))) {
-+						printk(KERN_WARNING "amd7930: receive out of memory");
-+					} else {
-+						skb_put(hw->rv_skb, len);
-+						skb_queue_tail(&bcs->rqueue, hw->rv_skb);
-+						hw->rv_skb = skb;
-+						bcs->event |= 1 << B_RCVBUFREADY;
-+						queue_task(&bcs->tqueue, &tq_immediate);
-+					}
-+				} else if (len > 0) {
-+					/* Small packet received */
-+
-+					if (!(skb = dev_alloc_skb(len))) {
-+						printk(KERN_WARNING "amd7930: receive out of memory\n");
-+					} else {
-+						memcpy(skb_put(skb, len), hw->rv_skb->tail, len);
-+						skb_queue_tail(&bcs->rqueue, skb);
-+						bcs->event |= 1 << B_RCVBUFREADY;
-+						queue_task(&bcs->tqueue, &tq_immediate);
-+						mark_bh(IMMEDIATE_BH);
-+					}
-+				} else {
-+					/* Reception Error */
-+					/* printk("amd7930: B channel receive error\n"); */
-+				}
-+			}
-+		} else if (bcs->mode == L1_MODE_TRANS) {
-+			if (!(skb = dev_alloc_skb(RCV_BUFSIZE/RCV_BUFBLKS))) {
-+				printk(KERN_WARNING "amd7930: receive out of memory\n");
-+			} else {
-+				memcpy(skb_put(skb, RCV_BUFSIZE/RCV_BUFBLKS),
-+				       hw->rv_buff + hw->rv_buff_out,
-+				       RCV_BUFSIZE/RCV_BUFBLKS);
-+				skb_queue_tail(&bcs->rqueue, skb);
-+				bcs->event |= 1 << B_RCVBUFREADY;
-+				queue_task(&bcs->tqueue, &tq_immediate);
-+				mark_bh(IMMEDIATE_BH);
-+			}
-+		}
-+
-+		if (hw->rv_buff_in == hw->rv_buff_out) {
-+			/* Buffer was filled up - need to restart receiver */
-+			amd7930_brecv(0, bcs->channel,
-+				      hw->rv_buff + hw->rv_buff_in,
-+				      RCV_BUFSIZE/RCV_BUFBLKS,
-+				      (void *) &Bchan_recv_callback,
-+				      (void *) bcs);
-+		}
-+
-+		hw->rv_buff_out += RCV_BUFSIZE/RCV_BUFBLKS;
-+		hw->rv_buff_out %= RCV_BUFSIZE;
-+
-+	} while (hw->rv_buff_in != hw->rv_buff_out);
-+}
-+
-+static void
-+Bchan_close(struct BCState *bcs)
-+{
-+	struct sk_buff *skb;
-+
-+	Bchan_mode(bcs, 0, 0);
-+	amd7930_bclose(0, bcs->channel);
-+
-+	if (test_bit(BC_FLG_INIT, &bcs->Flag)) {
-+		skb_queue_purge(&bcs->rqueue);
-+		skb_queue_purge(&bcs->squeue);
-+	}
-+	test_and_clear_bit(BC_FLG_INIT, &bcs->Flag);
-+}
-+
-+static int
-+Bchan_open(struct BCState *bcs)
-+{
-+	struct amd7930_hw *hw = &bcs->hw.amd7930;
-+
-+	if (!test_and_set_bit(BC_FLG_INIT, &bcs->Flag)) {
-+		skb_queue_head_init(&bcs->rqueue);
-+		skb_queue_head_init(&bcs->squeue);
-+	}
-+	test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
-+
-+	amd7930_bopen(0, bcs->channel, 0xff);
-+	hw->rv_buff_in = 0;
-+	hw->rv_buff_out = 0;
-+	hw->tx_skb = NULL;
-+	init_hdlc_state(hw->hdlc_state, 0);
-+	amd7930_brecv(0, bcs->channel,
-+		      hw->rv_buff + hw->rv_buff_in, RCV_BUFSIZE/RCV_BUFBLKS,
-+		      (void *) &Bchan_recv_callback, (void *) bcs);
-+
-+	bcs->event = 0;
-+	bcs->tx_cnt = 0;
-+	return (0);
-+}
-+
-+static void
-+Bchan_init(struct BCState *bcs)
-+{
-+	if (!(bcs->hw.amd7930.tx_buff = kmalloc(RAW_BUFMAX, GFP_ATOMIC))) {
-+		printk(KERN_WARNING
-+		       "HiSax: No memory for amd7930.tx_buff\n");
-+		return;
-+	}
-+	if (!(bcs->hw.amd7930.rv_buff = kmalloc(RCV_BUFSIZE, GFP_ATOMIC))) {
-+		printk(KERN_WARNING
-+		       "HiSax: No memory for amd7930.rv_buff\n");
-+		return;
-+	}
-+	if (!(bcs->hw.amd7930.rv_skb = dev_alloc_skb(HSCX_BUFMAX))) {
-+		printk(KERN_WARNING
-+		       "HiSax: No memory for amd7930.rv_skb\n");
-+		return;
-+	}
-+	if (!(bcs->hw.amd7930.hdlc_state = kmalloc(sizeof(struct hdlc_state),
-+						   GFP_ATOMIC))) {
-+		printk(KERN_WARNING
-+		       "HiSax: No memory for amd7930.hdlc_state\n");
-+		return;
-+	}
-+
-+	bcs->hw.amd7930.tq_rcv.sync = 0;
-+	bcs->hw.amd7930.tq_rcv.routine = (void (*)(void *)) &Bchan_rcv_bh;
-+	bcs->hw.amd7930.tq_rcv.data = (void *) bcs;
-+
-+	bcs->hw.amd7930.tq_xmt.sync = 0;
-+	bcs->hw.amd7930.tq_xmt.routine = (void (*)(void *)) &Bchan_xmt_bh;
-+	bcs->hw.amd7930.tq_xmt.data = (void *) bcs;
-+}
-+
-+static void
-+Bchan_manl1(struct PStack *st, int pr,
-+	  void *arg)
-+{
-+	switch (pr) {
-+		case (PH_ACTIVATE_REQ):
-+			test_and_set_bit(BC_FLG_ACTIV, &st->l1.bcs->Flag);
-+			Bchan_mode(st->l1.bcs, st->l1.mode, st->l1.bc);
-+			st->l1.l1man(st, PH_ACTIVATE_CNF, NULL);
-+			break;
-+		case (PH_DEACTIVATE_REQ):
-+			if (!test_bit(BC_FLG_BUSY, &st->l1.bcs->Flag))
-+				Bchan_mode(st->l1.bcs, 0, 0);
-+			test_and_clear_bit(BC_FLG_ACTIV, &st->l1.bcs->Flag);
-+			break;
-+	}
-+}
-+
-+int
-+setstack_amd7930(struct PStack *st, struct BCState *bcs)
-+{
-+	if (Bchan_open(bcs))
-+		return (-1);
-+	st->l1.bcs = bcs;
-+	st->l2.l2l1 = Bchan_l2l1;
-+	st->ma.manl1 = Bchan_manl1;
-+	setstack_manager(st);
-+	bcs->st = st;
-+	return (0);
-+}
-+
-+
-+static void
-+amd7930_drecv_callback(void *arg, int error, unsigned int count)
-+{
-+	struct IsdnCardState *cs = (struct IsdnCardState *) arg;
-+	static struct tq_struct task;
-+	struct sk_buff *skb;
-+
-+        /* NOTE: This function is called directly from an interrupt handler */
-+
-+	if (1) {
-+		if (!(skb = alloc_skb(count, GFP_ATOMIC)))
-+			printk(KERN_WARNING "HiSax: D receive out of memory\n");
-+		else {
-+			memcpy(skb_put(skb, count), cs->rcvbuf, count);
-+			skb_queue_tail(&cs->rq, skb);
-+		}
-+
-+		task.routine = (void *) DChannel_proc_rcv;
-+		task.data = (void *) cs;
-+		queue_task(&task, &tq_immediate);
-+		mark_bh(IMMEDIATE_BH);
-+	}
-+
-+	if (cs->debug & L1_DEB_ISAC_FIFO) {
-+		char tmp[128];
-+		char *t = tmp;
-+
-+		t += sprintf(t, "amd7930 Drecv cnt %d", count);
-+		if (error) t += sprintf(t, " ERR %x", error);
-+		QuickHex(t, cs->rcvbuf, count);
-+		debugl1(cs, tmp);
-+	}
-+
-+	amd7930_drecv(0, cs->rcvbuf, MAX_DFRAME_LEN,
-+		      &amd7930_drecv_callback, cs);
-+}
-+
-+static void
-+amd7930_dxmit_callback(void *arg, int error)
-+{
-+	struct IsdnCardState *cs = (struct IsdnCardState *) arg;
-+	static struct tq_struct task;
-+
-+        /* NOTE: This function is called directly from an interrupt handler */
-+
-+	/* may wish to do retransmission here, if error indicates collision */
-+
-+	if (cs->debug & L1_DEB_ISAC_FIFO) {
-+		char tmp[128];
-+		char *t = tmp;
-+
-+		t += sprintf(t, "amd7930 Dxmit cnt %d", cs->tx_skb->len);
-+		if (error) t += sprintf(t, " ERR %x", error);
-+		QuickHex(t, cs->tx_skb->data, cs->tx_skb->len);
-+		debugl1(cs, tmp);
-+	}
-+
-+	cs->tx_skb = NULL;
-+
-+	task.routine = (void *) DChannel_proc_xmt;
-+	task.data = (void *) cs;
-+	queue_task(&task, &tq_immediate);
-+	mark_bh(IMMEDIATE_BH);
-+}
-+
-+static void
-+amd7930_Dchan_l2l1(struct PStack *st, int pr, void *arg)
-+{
-+	struct IsdnCardState *cs = (struct IsdnCardState *) st->l1.hardware;
-+	struct sk_buff *skb = arg;
-+	char str[64];
-+
-+	switch (pr) {
-+		case (PH_DATA_REQ):
-+			if (cs->tx_skb) {
-+				skb_queue_tail(&cs->sq, skb);
-+#ifdef L2FRAME_DEBUG		/* psa */
-+				if (cs->debug & L1_DEB_LAPD)
-+					Logl2Frame(cs, skb, "PH_DATA Queued", 0);
-+#endif
-+			} else {
-+				if ((cs->dlogflag) && (!(skb->data[2] & 1))) {
-+					/* I-FRAME */
-+					LogFrame(cs, skb->data, skb->len);
-+					sprintf(str, "Q.931 frame user->network tei %d", st->l2.tei);
-+					dlogframe(cs, skb->data+4, skb->len-4,
-+						  str);
-+				}
-+				cs->tx_skb = skb;
-+				cs->tx_cnt = 0;
-+#ifdef L2FRAME_DEBUG		/* psa */
-+				if (cs->debug & L1_DEB_LAPD)
-+					Logl2Frame(cs, skb, "PH_DATA", 0);
-+#endif
-+				amd7930_dxmit(0, skb->data, skb->len,
-+					      &amd7930_dxmit_callback, cs);
-+			}
-+			break;
-+		case (PH_PULL_IND):
-+			if (cs->tx_skb) {
-+				if (cs->debug & L1_DEB_WARN)
-+					debugl1(cs, " l2l1 tx_skb exist this shouldn't happen");
-+				skb_queue_tail(&cs->sq, skb);
-+				break;
-+			}
-+			if ((cs->dlogflag) && (!(skb->data[2] & 1))) {	/* I-FRAME */
-+				LogFrame(cs, skb->data, skb->len);
-+				sprintf(str, "Q.931 frame user->network tei %d", st->l2.tei);
-+				dlogframe(cs, skb->data + 4, skb->len - 4,
-+					  str);
-+			}
-+			cs->tx_skb = skb;
-+			cs->tx_cnt = 0;
-+#ifdef L2FRAME_DEBUG		/* psa */
-+			if (cs->debug & L1_DEB_LAPD)
-+				Logl2Frame(cs, skb, "PH_DATA_PULLED", 0);
-+#endif
-+			amd7930_dxmit(0, cs->tx_skb->data, cs->tx_skb->len,
-+				      &amd7930_dxmit_callback, cs);
-+			break;
-+		case (PH_PULL_REQ):
-+#ifdef L2FRAME_DEBUG		/* psa */
-+			if (cs->debug & L1_DEB_LAPD)
-+				debugl1(cs, "-> PH_REQUEST_PULL");
-+#endif
-+			if (!cs->tx_skb) {
-+				test_and_clear_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
-+				st->l1.l1l2(st, PH_PULL_CNF, NULL);
-+			} else
-+				test_and_set_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
-+			break;
-+	}
-+}
-+
-+int
-+setDstack_amd7930(struct PStack *st, struct IsdnCardState *cs)
-+{
-+	st->l2.l2l1 = amd7930_Dchan_l2l1;
-+	if (! cs->rcvbuf) {
-+		printk("setDstack_amd7930: No cs->rcvbuf!\n");
-+	} else {
-+		amd7930_drecv(0, cs->rcvbuf, MAX_DFRAME_LEN,
-+			      &amd7930_drecv_callback, cs);
-+	}
-+	return (0);
-+}
-+
-+static void
-+manl1_msg(struct IsdnCardState *cs, int msg, void *arg) {
-+	struct PStack *st;
-+
-+	st = cs->stlist;
-+	while (st) {
-+		st->ma.manl1(st, msg, arg);
-+		st = st->next;
-+	}
-+}
-+
-+static void
-+amd7930_new_ph(struct IsdnCardState *cs)
-+{
-+	switch (amd7930_get_liu_state(0)) {
-+	        case 3:
-+			manl1_msg(cs, PH_POWERUP_CNF, NULL);
-+                        break;
-+
-+	        case 7:
-+			manl1_msg(cs, PH_I4_P8_IND, NULL);
-+			break;
-+
-+	        case 8:
-+			manl1_msg(cs, PH_RSYNC_IND, NULL);
-+			break;
-+	}
-+}
-+
-+/* amd7930 LIU state change callback */
-+
-+static void
-+amd7930_liu_callback(struct IsdnCardState *cs)
-+{
-+	static struct tq_struct task;
-+
-+	if (!cs)
-+		return;
-+
-+	if (cs->debug & L1_DEB_ISAC) {
-+		char tmp[32];
-+		sprintf(tmp, "amd7930_liu state %d", amd7930_get_liu_state(0));
-+		debugl1(cs, tmp);
-+	}
-+
-+	task.sync = 0;
-+	task.routine = (void *) &amd7930_new_ph;
-+	task.data = (void *) cs;
-+	queue_task(&task, &tq_immediate);
-+	mark_bh(IMMEDIATE_BH);
-+}
-+
-+void
-+amd7930_l1cmd(struct IsdnCardState *cs, int msg, void *arg)
-+{
-+	u_char val;
-+	char tmp[32];
-+	
-+	if (cs->debug & L1_DEB_ISAC) {
-+		char tmp[32];
-+		sprintf(tmp, "amd7930_l1cmd msg %x", msg);
-+		debugl1(cs, tmp);
-+	}
-+
-+	switch(msg) {
-+		case PH_RESET_REQ:
-+			if (amd7930_get_liu_state(0) <= 3)
-+				amd7930_liu_activate(0,0);
-+			else
-+				amd7930_liu_deactivate(0);
-+			break;
-+		case PH_ENABLE_REQ:
-+			break;
-+		case PH_INFO3_REQ:
-+			amd7930_liu_activate(0,0);
-+			break;
-+		case PH_TESTLOOP_REQ:
-+			break;
-+		default:
-+			if (cs->debug & L1_DEB_WARN) {
-+				sprintf(tmp, "amd7930_l1cmd unknown %4x", msg);
-+				debugl1(cs, tmp);
-+			}
-+			break;
-+	}
-+}
-+
-+static void init_amd7930(struct IsdnCardState *cs)
-+{
-+	Bchan_init(&cs->bcs[0]);
-+	Bchan_init(&cs->bcs[1]);
-+	cs->bcs[0].BC_SetStack = setstack_amd7930;
-+	cs->bcs[1].BC_SetStack = setstack_amd7930;
-+	cs->bcs[0].BC_Close = Bchan_close;
-+	cs->bcs[1].BC_Close = Bchan_close;
-+	Bchan_mode(cs->bcs, 0, 0);
-+	Bchan_mode(cs->bcs + 1, 0, 0);
-+}
-+
-+void
-+release_amd7930(struct IsdnCardState *cs)
-+{
-+}
-+
-+static int
-+amd7930_card_msg(struct IsdnCardState *cs, int mt, void *arg)
-+{
-+	switch (mt) {
-+		case CARD_RESET:
-+			return(0);
-+		case CARD_RELEASE:
-+			release_amd7930(cs);
-+			return(0);
-+		case CARD_INIT:
-+			cs->l1cmd = amd7930_l1cmd;
-+			amd7930_liu_init(0, &amd7930_liu_callback, (void *)cs);
-+			init_amd7930(cs);
-+			return(0);
-+		case CARD_TEST:
-+			return(0);
-+	}
-+	return(0);
-+}
-+
-+int __init
-+setup_amd7930(struct IsdnCard *card)
-+{
-+	struct IsdnCardState *cs = card->cs;
-+	char tmp[64];
-+
-+	strcpy(tmp, amd7930_revision);
-+	printk(KERN_INFO "HiSax: AMD7930 driver Rev. %s\n", HiSax_getrev(tmp));
-+	if (cs->typ != ISDN_CTYPE_AMD7930)
-+		return (0);
-+
-+        cs->irq = amd7930_get_irqnum(0);
-+        if (cs->irq == 0)
-+		return (0);
-+
-+	cs->cardmsg = &amd7930_card_msg;
-+
-+	return (1);
-+}
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/arcofi.c linux-2.4.29/drivers/isdn/hisax/arcofi.c
---- linux-2.4.29.old/drivers/isdn/hisax/arcofi.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/arcofi.c	2005-03-22 15:06:45.852122200 +0100
-@@ -1,4 +1,4 @@
--/* $Id: arcofi.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: arcofi.c,v 1.14 2001/09/24 13:22:55 kai Exp $
-  *
-  * Ansteuerung ARCOFI 2165
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/arcofi.h linux-2.4.29/drivers/isdn/hisax/arcofi.h
---- linux-2.4.29.old/drivers/isdn/hisax/arcofi.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/arcofi.h	2005-03-22 15:06:45.872119160 +0100
-@@ -1,4 +1,4 @@
--/* $Id: arcofi.h,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id$
-  *
-  * Ansteuerung ARCOFI 2165
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/asuscom.c linux-2.4.29/drivers/isdn/hisax/asuscom.c
---- linux-2.4.29.old/drivers/isdn/hisax/asuscom.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/asuscom.c	2005-03-22 15:06:45.889116576 +0100
-@@ -1,4 +1,4 @@
--/* $Id: asuscom.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: asuscom.c,v 1.14 2001/09/24 13:22:55 kai Exp $
-  *
-  * low level stuff for ASUSCOM NETWORK INC. ISDNLink cards
-  *
-@@ -14,7 +14,6 @@
- 
- #define __NO_VERSION__
- #include <linux/init.h>
--#include <linux/isapnp.h>
- #include "hisax.h"
- #include "isac.h"
- #include "ipac.h"
-@@ -23,7 +22,7 @@
- 
- extern const char *CardType[];
- 
--const char *Asuscom_revision = "$Revision: 1.1.4.1 $";
-+const char *Asuscom_revision = "$Revision: 1.14 $";
- 
- #define byteout(addr,val) outb(val,addr)
- #define bytein(addr) inb(addr)
-@@ -310,27 +309,6 @@
- 	return(0);
- }
- 
--#ifdef __ISAPNP__
--static struct isapnp_device_id asus_ids[] __initdata = {
--	{ ISAPNP_VENDOR('A', 'S', 'U'), ISAPNP_FUNCTION(0x1688),
--	  ISAPNP_VENDOR('A', 'S', 'U'), ISAPNP_FUNCTION(0x1688), 
--	  (unsigned long) "Asus1688 PnP" },
--	{ ISAPNP_VENDOR('A', 'S', 'U'), ISAPNP_FUNCTION(0x1690),
--	  ISAPNP_VENDOR('A', 'S', 'U'), ISAPNP_FUNCTION(0x1690), 
--	  (unsigned long) "Asus1690 PnP" },
--	{ ISAPNP_VENDOR('S', 'I', 'E'), ISAPNP_FUNCTION(0x0020),
--	  ISAPNP_VENDOR('S', 'I', 'E'), ISAPNP_FUNCTION(0x0020), 
--	  (unsigned long) "Isurf2 PnP" },
--	{ ISAPNP_VENDOR('E', 'L', 'F'), ISAPNP_FUNCTION(0x0000),
--	  ISAPNP_VENDOR('E', 'L', 'F'), ISAPNP_FUNCTION(0x0000), 
--	  (unsigned long) "Iscas TE320" },
--	{ 0, }
--};
--
--static struct isapnp_device_id *adev = &asus_ids[0];
--static struct pci_bus *pnp_c __devinitdata = NULL;
--#endif
--
- int __init
- setup_asuscom(struct IsdnCard *card)
- {
-@@ -343,45 +321,7 @@
- 	printk(KERN_INFO "HiSax: Asuscom ISDNLink driver Rev. %s\n", HiSax_getrev(tmp));
- 	if (cs->typ != ISDN_CTYPE_ASUSCOM)
- 		return (0);
--#ifdef __ISAPNP__
--	if (!card->para[1] && isapnp_present()) {
--		struct pci_bus *pb;
--		struct pci_dev *pd;
--
--		while(adev->card_vendor) {
--			if ((pb = isapnp_find_card(adev->card_vendor,
--				adev->card_device, pnp_c))) {
--				pnp_c = pb;
--				pd = NULL;
--				if ((pd = isapnp_find_dev(pnp_c,
--					adev->vendor, adev->function, pd))) {
--					printk(KERN_INFO "HiSax: %s detected\n",
--						(char *)adev->driver_data);
--					pd->prepare(pd);
--					pd->deactivate(pd);
--					pd->activate(pd);
--					card->para[1] = pd->resource[0].start;
--					card->para[0] = pd->irq_resource[0].start;
--					if (!card->para[0] || !card->para[1]) {
--						printk(KERN_ERR "AsusPnP:some resources are missing %ld/%lx\n",
--						card->para[0], card->para[1]);
--						pd->deactivate(pd);
--						return(0);
--					}
--					break;
--				} else {
--					printk(KERN_ERR "AsusPnP: PnP error card found, no device\n");
--				}
--			}
--			adev++;
--			pnp_c=NULL;
--		} 
--		if (!adev->card_vendor) {
--			printk(KERN_INFO "AsusPnP: no ISAPnP card found\n");
--			return(0);
--		}
--	}
--#endif
-+
- 	bytecnt = 8;
- 	cs->hw.asus.cfg_reg = card->para[1];
- 	cs->irq = card->para[0];
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/avm_a1.c linux-2.4.29/drivers/isdn/hisax/avm_a1.c
---- linux-2.4.29.old/drivers/isdn/hisax/avm_a1.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/avm_a1.c	2005-03-22 15:06:45.904114296 +0100
-@@ -1,4 +1,4 @@
--/* $Id: avm_a1.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: avm_a1.c,v 2.15 2001/09/24 13:22:55 kai Exp $
-  *
-  * low level stuff for AVM A1 (Fritz) isdn cards
-  *
-@@ -18,7 +18,7 @@
- #include "isdnl1.h"
- 
- extern const char *CardType[];
--static const char *avm_revision = "$Revision: 1.1.4.1 $";
-+static const char *avm_revision = "$Revision: 2.15 $";
- 
- #define	 AVM_A1_STAT_ISAC	0x01
- #define	 AVM_A1_STAT_HSCX	0x02
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/avm_a1p.c linux-2.4.29/drivers/isdn/hisax/avm_a1p.c
---- linux-2.4.29.old/drivers/isdn/hisax/avm_a1p.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/avm_a1p.c	2005-03-22 15:06:45.919112016 +0100
-@@ -1,4 +1,4 @@
--/* $Id: avm_a1p.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: avm_a1p.c,v 2.9 2001/09/24 13:22:55 kai Exp $
-  *
-  * low level stuff for the following AVM cards:
-  * A1 PCMCIA
-@@ -57,7 +57,7 @@
- #define byteout(addr,val) outb(val,addr)
- #define bytein(addr) inb(addr)
- 
--static const char *avm_revision = "$Revision: 1.1.4.1 $";
-+static const char *avm_revision = "$Revision: 2.9 $";
- 
- static inline u_char
- ReadISAC(struct IsdnCardState *cs, u_char offset)
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/avm_pci.c linux-2.4.29/drivers/isdn/hisax/avm_pci.c
---- linux-2.4.29.old/drivers/isdn/hisax/avm_pci.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/avm_pci.c	2005-03-22 15:06:45.945108064 +0100
-@@ -1,4 +1,4 @@
--/* $Id: avm_pci.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: avm_pci.c,v 1.29 2001/09/24 13:22:55 kai Exp $
-  *
-  * low level stuff for AVM Fritz!PCI and ISA PnP isdn cards
-  *
-@@ -19,11 +19,11 @@
- #include "isac.h"
- #include "isdnl1.h"
- #include <linux/pci.h>
--#include <linux/isapnp.h>
-+#include <linux/isdn_compat.h>
- #include <linux/interrupt.h>
- 
- extern const char *CardType[];
--static const char *avm_pci_rev = "$Revision: 1.1.4.1 $";
-+static const char *avm_pci_rev = "$Revision: 1.29 $";
- 
- #define  AVM_FRITZ_PCI		1
- #define  AVM_FRITZ_PNP		2
-@@ -291,8 +291,7 @@
- 			debugl1(cs, "hdlc_empty_fifo: incoming packet too large");
- 		return;
- 	}
--	p = bcs->hw.hdlc.rcvbuf + bcs->hw.hdlc.rcvidx;
--	ptr = (u_int *)p;
-+	ptr = (u_int *) p = bcs->hw.hdlc.rcvbuf + bcs->hw.hdlc.rcvidx;
- 	bcs->hw.hdlc.rcvidx += count;
- 	if (cs->subtyp == AVM_FRITZ_PCI) {
- 		outl(idx, cs->hw.avm.cfg_reg + 4);
-@@ -353,8 +352,7 @@
- 	}
- 	if ((cs->debug & L1_DEB_HSCX) && !(cs->debug & L1_DEB_HSCX_FIFO))
- 		debugl1(cs, "hdlc_fill_fifo %d/%ld", count, bcs->tx_skb->len);
--	p = bcs->tx_skb->data;
--	ptr = (u_int *)p;
-+	ptr = (u_int *) p = bcs->tx_skb->data;
- 	skb_pull(bcs->tx_skb, count);
- 	bcs->tx_cnt -= count;
- 	bcs->hw.hdlc.count += count;
-@@ -766,10 +764,6 @@
- }
- 
- static struct pci_dev *dev_avm __initdata = NULL;
--#ifdef __ISAPNP__
--static struct pci_bus *bus_avm __initdata = NULL;
--static struct pci_dev *pnp_avm __initdata = NULL;
--#endif
- 
- int __init
- setup_avm_pcipnp(struct IsdnCard *card)
-@@ -783,47 +777,10 @@
- 	if (cs->typ != ISDN_CTYPE_FRITZPCI)
- 		return (0);
- 	if (card->para[1]) {
--		/* old manual method */
- 		cs->hw.avm.cfg_reg = card->para[1];
- 		cs->irq = card->para[0];
- 		cs->subtyp = AVM_FRITZ_PNP;
- 	} else {
--#ifdef __ISAPNP__
--		if (isapnp_present()) {
--			struct pci_bus *ba;
--			if ((ba = isapnp_find_card(
--				ISAPNP_VENDOR('A', 'V', 'M'),
--				ISAPNP_FUNCTION(0x0900), bus_avm))) {
--				bus_avm = ba;
--				pnp_avm = NULL;
--				if ((pnp_avm = isapnp_find_dev(bus_avm,
--					ISAPNP_VENDOR('A', 'V', 'M'),
--					ISAPNP_FUNCTION(0x0900), pnp_avm))) {
--					pnp_avm->prepare(pnp_avm);
--					pnp_avm->deactivate(pnp_avm);
--					pnp_avm->activate(pnp_avm);
--					cs->hw.avm.cfg_reg =
--						pnp_avm->resource[0].start;
--					cs->irq = 
--						pnp_avm->irq_resource[0].start;
--					if (!cs->irq) {
--						printk(KERN_ERR "FritzPnP:No IRQ\n");
--						pnp_avm->deactivate(pnp_avm);
--						return(0);
--					}
--					if (!cs->hw.avm.cfg_reg) {
--						printk(KERN_ERR "FritzPnP:No IO address\n");
--						pnp_avm->deactivate(pnp_avm);
--						return(0);
--					}
--					cs->subtyp = AVM_FRITZ_PNP;
--					goto ready;
--				}
--			}
--		} else {
--			printk(KERN_INFO "FritzPnP: no ISA PnP present\n");
--		}
--#endif
- #if CONFIG_PCI
- 		if (!pci_present()) {
- 			printk(KERN_ERR "FritzPCI: no PCI bus present\n");
-@@ -838,7 +795,7 @@
- 			}
- 			if (pci_enable_device(dev_avm))
- 				return(0);
--			cs->hw.avm.cfg_reg = pci_resource_start(dev_avm, 1);
-+			cs->hw.avm.cfg_reg = pci_resource_start_io(dev_avm, 1);
- 			if (!cs->hw.avm.cfg_reg) {
- 				printk(KERN_ERR "FritzPCI: No IO-Adr for PCI card found\n");
- 				return(0);
-@@ -854,7 +811,6 @@
- 		return (0);
- #endif /* CONFIG_PCI */
- 	}
--ready:
- 	cs->hw.avm.isac = cs->hw.avm.cfg_reg + 0x10;
- 	if (check_region((cs->hw.avm.cfg_reg), 32)) {
- 		printk(KERN_WARNING
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/bkm_a4t.c linux-2.4.29/drivers/isdn/hisax/bkm_a4t.c
---- linux-2.4.29.old/drivers/isdn/hisax/bkm_a4t.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/bkm_a4t.c	2005-03-22 15:06:45.962105480 +0100
-@@ -1,4 +1,4 @@
--/* $Id: bkm_a4t.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: bkm_a4t.c,v 1.22 2001/09/24 13:22:55 kai Exp $
-  *
-  * low level stuff for T-Berkom A4T
-  *
-@@ -20,11 +20,12 @@
- #include "jade.h"
- #include "isdnl1.h"
- #include <linux/pci.h>
-+#include <linux/isdn_compat.h>
- #include "bkm_ax.h"
- 
- extern const char *CardType[];
- 
--const char *bkm_a4t_revision = "$Revision: 1.1.4.1 $";
-+const char *bkm_a4t_revision = "$Revision: 1.22 $";
- 
- 
- static inline u_char
-@@ -293,13 +294,13 @@
- 		u16 sub_sys;
- 		u16 sub_vendor;
- 
--		sub_vendor = dev_a4t->subsystem_vendor;
--		sub_sys = dev_a4t->subsystem_device;
-+		pci_get_sub_vendor(dev_a4t,sub_vendor);
-+		pci_get_sub_system(dev_a4t,sub_sys);
- 		if ((sub_sys == PCI_DEVICE_ID_BERKOM_A4T) && (sub_vendor == PCI_VENDOR_ID_BERKOM)) {
- 			if (pci_enable_device(dev_a4t))
- 				return(0);
- 			found = 1;
--			pci_memaddr = pci_resource_start(dev_a4t, 0);
-+			pci_memaddr = pci_resource_start_mem(dev_a4t, 0);
- 			cs->irq = dev_a4t->irq;
- 			break;
- 		}
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/bkm_a8.c linux-2.4.29/drivers/isdn/hisax/bkm_a8.c
---- linux-2.4.29.old/drivers/isdn/hisax/bkm_a8.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/bkm_a8.c	2005-03-22 15:06:45.982102440 +0100
-@@ -1,4 +1,4 @@
--/* $Id: bkm_a8.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: bkm_a8.c,v 1.22 2001/09/24 13:22:55 kai Exp $
-  *
-  * low level stuff for Scitel Quadro (4*S0, passive)
-  *
-@@ -20,6 +20,7 @@
- #include "hscx.h"
- #include "isdnl1.h"
- #include <linux/pci.h>
-+#include <linux/isdn_compat.h>
- #include "bkm_ax.h"
- 
- #if CONFIG_PCI
-@@ -28,7 +29,7 @@
- 
- extern const char *CardType[];
- 
--const char sct_quadro_revision[] = "$Revision: 1.1.4.1 $";
-+const char sct_quadro_revision[] = "$Revision: 1.22 $";
- 
- static const char *sct_quadro_subtypes[] =
- {
-@@ -329,13 +330,13 @@
- 		while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX,
- 			PCI_DEVICE_ID_PLX_9050, dev_a8))) {
- 			
--			sub_vendor_id = dev_a8->subsystem_vendor;
--			sub_sys_id = dev_a8->subsystem_device;
-+			pci_get_sub_vendor(dev_a8,sub_vendor_id);
-+			pci_get_sub_system(dev_a8,sub_sys_id);
- 			if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
- 				(sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
- 				if (pci_enable_device(dev_a8))
- 					return(0);
--				pci_ioaddr1 = pci_resource_start(dev_a8, 1);
-+				pci_ioaddr1 = pci_resource_start_io(dev_a8, 1);
- 				pci_irq = dev_a8->irq;
- 				pci_bus = dev_a8->bus->number;
- 				pci_device_fn = dev_a8->devfn;
-@@ -365,7 +366,7 @@
- 			pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
- 			pcibios_write_config_dword(pci_bus, pci_device_fn,
- 				PCI_BASE_ADDRESS_1, pci_ioaddr1);
--			dev_a8->resource[ 1].start = pci_ioaddr1;
-+			get_pcibase(dev_a8, 1) = pci_ioaddr1;
- 		}
- #endif /* End HACK */
- 	}
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/bkm_ax.h linux-2.4.29/drivers/isdn/hisax/bkm_ax.h
---- linux-2.4.29.old/drivers/isdn/hisax/bkm_ax.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/bkm_ax.h	2005-03-22 15:06:46.010098184 +0100
-@@ -1,4 +1,4 @@
--/* $Id: bkm_ax.h,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id$
-  *
-  * low level decls for T-Berkom cards A4T and Scitel Quadro (4*S0, passive)
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/callc.c linux-2.4.29/drivers/isdn/hisax/callc.c
---- linux-2.4.29.old/drivers/isdn/hisax/callc.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/callc.c	2005-03-22 15:06:46.027095600 +0100
-@@ -1,4 +1,4 @@
--/* $Id: callc.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: callc.c,v 2.59 2002/02/09 21:19:11 keil Exp $
-  *
-  * Author       Karsten Keil
-  * Copyright    by Karsten Keil      <keil@isdn4linux.de>
-@@ -26,7 +26,7 @@
- #define MOD_USE_COUNT ( GET_USE_COUNT (&__this_module))
- #endif	/* MODULE */
- 
--const char *lli_revision = "$Revision: 1.1.4.1 $";
-+const char *lli_revision = "$Revision: 2.59 $";
- 
- extern struct IsdnCard cards[];
- extern int nrcards;
-@@ -145,9 +145,11 @@
- 	EV_PROCEED,		/* 20 */
- 	EV_ALERT,		/* 21 */ 
- 	EV_REDIR,		/* 22 */ 
-+	EV_ALERTING,		/* 23 */
-+	EV_PROCEEDING,		/* 24 */
- };
- 
--#define EVENT_COUNT (EV_REDIR + 1)
-+#define EVENT_COUNT (EV_PROCEEDING + 1)
- 
- static char *strEvent[] =
- {
-@@ -174,6 +176,8 @@
- 	"EV_PROCEED",
- 	"EV_ALERT",
- 	"EV_REDIR",
-+	"EV_ALERTING",
-+	"EV_PROCEEDING",
- };
- 
- 
-@@ -286,6 +290,22 @@
- }
- 
- static void
-+lli_alerting(struct FsmInst *fi, int event, void *arg)
-+{
-+	struct Channel *chanp = fi->userdata;
-+	
-+	HL_LL(chanp, ISDN_STAT_ALERT);
-+}
-+
-+static void
-+lli_proceeding(struct FsmInst *fi, int event, void *arg)
-+{
-+	struct Channel *chanp = fi->userdata;
-+	
-+	HL_LL(chanp, ISDN_STAT_PROCEED);
-+}
-+
-+static void
- lli_resume(struct FsmInst *fi, int event, void *arg)
- {
- 	struct Channel *chanp = fi->userdata;
-@@ -784,6 +804,8 @@
-         {ST_OUT_DIAL,           EV_DISCONNECT_IND,      lli_release_req},
-         {ST_OUT_DIAL,           EV_RELEASE,             lli_dhup_close},
-         {ST_OUT_DIAL,           EV_NOSETUP_RSP,         lli_no_setup_rsp},
-+        {ST_OUT_DIAL,           EV_PROCEEDING,		lli_proceeding},
-+        {ST_OUT_DIAL,           EV_ALERTING,		lli_alerting},
-         {ST_OUT_DIAL,           EV_SETUP_ERR,           lli_error},
-         {ST_IN_WAIT_LL,         EV_LEASED_REL,          lli_failure_l},
-         {ST_IN_WAIT_LL,         EV_ACCEPTD,             lli_setup_rsp},
-@@ -925,7 +947,7 @@
- 	ic.driver = cs->myid;
- 	ic.command = ISDN_STAT_REDIR;
- 	ic.arg = chan; 
--	ic.parm.num[0] = result;
-+	(ulong)(ic.parm.num[0]) = result;
- 	cs->iif.statcallb(&ic);
- } /* stat_redir_result */
- 
-@@ -997,8 +1019,13 @@
- 			FsmEvent(&chanp->fi, EV_RELEASE, NULL);
- 			break;
- 		case (CC_PROCEED_SEND | INDICATION):
-+			break;
- 		case (CC_PROCEEDING | INDICATION):
-+			FsmEvent(&chanp->fi, EV_PROCEEDING, NULL);
-+			break;
- 		case (CC_ALERTING | INDICATION):
-+			FsmEvent(&chanp->fi, EV_ALERTING, NULL);
-+			break;
- 		case (CC_PROGRESS | INDICATION):
- 		case (CC_NOTIFY | INDICATION):
- 			break;
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/cert.c linux-2.4.29/drivers/isdn/hisax/cert.c
---- linux-2.4.29.old/drivers/isdn/hisax/cert.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/cert.c	2005-03-22 15:06:46.042093320 +0100
-@@ -1,4 +1,4 @@
--/* $Id: cert.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: cert.c,v 2.6 2001/09/24 13:22:56 kai Exp $
-  *
-  * Author       Karsten Keil
-  * Copyright    by Karsten Keil      <keil@isdn4linux.de>
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/config.c linux-2.4.29/drivers/isdn/hisax/config.c
---- linux-2.4.29.old/drivers/isdn/hisax/config.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/config.c	2005-03-22 15:06:46.077088000 +0100
-@@ -1,4 +1,4 @@
--/* $Id: config.c,v 1.1.4.5 2001/12/09 19:19:26 kai Exp $
-+/* $Id: config.c,v 2.84 2002/08/13 09:55:29 keil Exp $
-  *
-  * Author       Karsten Keil
-  * Copyright    by Karsten Keil      <keil@isdn4linux.de>
-@@ -24,6 +24,11 @@
- #include <linux/kernel_stat.h>
- #include <linux/tqueue.h>
- #include <linux/interrupt.h>
-+
-+#ifdef CONFIG_HISAX_HFC_USB
-+#include "hisax_loadable.h"
-+#endif
-+
- #define HISAX_STATUS_BUFSIZE 4096
- #define INCLUDE_INLINE_FUNCS
- 
-@@ -75,8 +80,7 @@
-  *   37 HFC 2BDS0 S+/SP         p0=irq p1=iobase
-  *   38 Travers Technologies NETspider-U PCI card
-  *   39 HFC 2BDS0-SP PCMCIA     p0=irq p1=iobase
-- *   40 hotplug interface
-- *   41 Formula-n enter:now ISDN PCI a/b   none
-+ *   40 HFC-S USB               none
-  *
-  * protocol can be either ISDN_PTYPE_EURO or ISDN_PTYPE_1TR6 or ISDN_PTYPE_NI1
-  *
-@@ -95,11 +99,17 @@
- 	"Siemens I-Surf", "Acer P10", "HST Saphir", "Telekom A4T",
- 	"Scitel Quadro", "Gazel", "HFC 2BDS0 PCI", "Winbond 6692",
- 	"HFC 2BDS0 SX", "NETspider-U", "HFC-2BDS0-SP PCMCIA",
--	"Hotplug", "Formula-n enter:now PCI a/b", 
-+	"HFC-S USB",
- };
- 
- void HiSax_closecard(int cardnr);
- 
-+#ifdef CONFIG_HISAX_HFC_USB
-+#define DEFAULT_CARD ISDN_CTYPE_HFC_USB
-+#define DEFAULT_CFG {0,0,0,0}
-+EXPORT_SYMBOL(hisax_register_hfcusb);
-+#endif
-+
- #ifdef CONFIG_HISAX_ELSA
- #define DEFAULT_CARD ISDN_CTYPE_ELSA
- #define DEFAULT_CFG {0,0,0,0}
-@@ -339,19 +349,27 @@
- 	NULL, \
- }
- 
--struct IsdnCard cards[HISAX_MAX_CARDS] = {
-+#define EMPTY_CARD	{0, DEFAULT_PROTO, {0, 0, 0, 0}, NULL}
-+
-+struct IsdnCard cards[] = {
- 	FIRST_CARD,
-+	EMPTY_CARD,
-+	EMPTY_CARD,
-+	EMPTY_CARD,
-+	EMPTY_CARD,
-+	EMPTY_CARD,
-+	EMPTY_CARD,
-+	EMPTY_CARD,
- };
- 
--#define HISAX_IDSIZE (HISAX_MAX_CARDS*8)
--static char HiSaxID[HISAX_IDSIZE] __devinitdata = { 0, };
-+static char HiSaxID[64] __devinitdata = { 0, };
- 
- char *HiSax_id __devinitdata = HiSaxID;
- #ifdef MODULE
- /* Variables for insmod */
--static int type[HISAX_MAX_CARDS] __devinitdata = { 0, };
--static int protocol[HISAX_MAX_CARDS] __devinitdata = { 0, };
--static int io[HISAX_MAX_CARDS] __devinitdata = { 0, };
-+static int type[8] __devinitdata = { 0, };
-+static int protocol[8] __devinitdata = { 0, };
-+static int io[8] __devinitdata = { 0, };
- #undef IO0_IO1
- #ifdef CONFIG_HISAX_16_3
- #define IO0_IO1
-@@ -361,27 +379,23 @@
- #define IO0_IO1
- #endif
- #ifdef IO0_IO1
--static int io0[HISAX_MAX_CARDS] __devinitdata = { 0, };
--static int io1[HISAX_MAX_CARDS] __devinitdata = { 0, };
-+static int io0[8] __devinitdata = { 0, };
-+static int io1[8] __devinitdata = { 0, };
- #endif
--static int irq[HISAX_MAX_CARDS] __devinitdata = { 0, };
--static int mem[HISAX_MAX_CARDS] __devinitdata = { 0, };
-+static int irq[8] __devinitdata = { 0, };
-+static int mem[8] __devinitdata = { 0, };
- static char *id __devinitdata = HiSaxID;
- 
--#define PARM_PARA "1-" __MODULE_STRING(HISAX_MAX_CARDS) "i"
--
--MODULE_DESCRIPTION("ISDN4Linux: Driver for passive ISDN cards");
- MODULE_AUTHOR("Karsten Keil");
--MODULE_LICENSE("GPL");
--MODULE_PARM(type, PARM_PARA);
--MODULE_PARM(protocol, PARM_PARA);
--MODULE_PARM(io, PARM_PARA);
--MODULE_PARM(irq, PARM_PARA);
--MODULE_PARM(mem, PARM_PARA);
-+MODULE_PARM(type, "1-8i");
-+MODULE_PARM(protocol, "1-8i");
-+MODULE_PARM(io, "1-8i");
-+MODULE_PARM(irq, "1-8i");
-+MODULE_PARM(mem, "1-8i");
- MODULE_PARM(id, "s");
- #ifdef IO0_IO1
--MODULE_PARM(io0, PARM_PARA);
--MODULE_PARM(io1, PARM_PARA);
-+MODULE_PARM(io0, "1-8i");
-+MODULE_PARM(io1, "1-8i");
- #endif
- #endif /* MODULE */
- 
-@@ -432,6 +446,7 @@
- }
- 
- #ifndef MODULE
-+#ifdef COMPAT_HAS_NEW_SETUP
- #define MAX_ARG	(HISAX_MAX_CARDS*5)
- static int __init HiSax_setup(char *line)
- {
-@@ -440,12 +455,16 @@
- 	char *str;
- 
- 	str = get_options(line, MAX_ARG, ints);
-+#else
-+void __init HiSax_setup(char *str, int *ints)
-+{
-+	int i, j, argc;
-+#endif
- 	argc = ints[0];
- 	printk(KERN_DEBUG "HiSax_setup: argc(%d) str(%s)\n", argc, str);
- 	i = 0;
- 	j = 1;
- 	while (argc && (i < HISAX_MAX_CARDS)) {
--		cards[i].protocol = DEFAULT_PROTO;
- 		if (argc) {
- 			cards[i].typ = ints[j];
- 			j++;
-@@ -473,19 +492,21 @@
- 		}
- 		i++;
- 	}
--  	if (str && *str) {
--		if (strlen(str) < HISAX_IDSIZE)
--			strcpy(HiSaxID, str);
--		else
--			printk(KERN_WARNING "HiSax: ID too long!");
--	} else
-+	if (str && *str) {
-+		strcpy(HiSaxID, str);
-+		HiSax_id = HiSaxID;
-+	} else {
- 		strcpy(HiSaxID, "HiSax");
--
--	HiSax_id = HiSaxID;
-+		HiSax_id = HiSaxID;
-+	}
-+#ifdef COMPAT_HAS_NEW_SETUP
- 	return 1;
- }
- 
- __setup("hisax=", HiSax_setup);
-+#else
-+}
-+#endif /* COMPAT_HAS_NEW_SETUP */
- #endif /* MODULES */
- 
- #if CARD_TELES0
-@@ -560,6 +581,10 @@
- extern int setup_hfcpci(struct IsdnCard *card);
- #endif
- 
-+#if CONFIG_HISAX_HFC_USB
-+extern int setup_hfc_usb(struct IsdnCard *card);
-+#endif
-+
- #if CARD_HFC_SX
- extern int setup_hfcsx(struct IsdnCard *card);
- #endif
-@@ -604,10 +629,6 @@
- extern int setup_netjet_u(struct IsdnCard *card);
- #endif
- 
--#if CARD_FN_ENTERNOW_PCI
--extern int setup_enternow_pci(struct IsdnCard *card);
--#endif
--
- /*
-  * Find card with given driverId
-  */
-@@ -899,7 +920,8 @@
- 	return 3;
- }
- 
--static int __devinit checkcard(int cardnr, char *id, int *busy_flag)
-+static int __devinit checkcard(int cardnr, char *id, int *busy_flag,
-+			       void *load_drv)
- {
- 	long flags;
- 	int ret = 0;
-@@ -1093,6 +1115,12 @@
- 		ret = setup_hfcsx(card);
- 		break;
- #endif
-+#if CONFIG_HISAX_HFC_USB
-+	case ISDN_CTYPE_HFC_USB:
-+		cs->hw.hfcusb.drv = load_drv;
-+		ret = setup_hfc_usb(card);
-+		break;
-+#endif
- #if CARD_NICCY
- 	case ISDN_CTYPE_NICCY:
- 		ret = setup_niccy(card);
-@@ -1143,11 +1171,6 @@
- 		ret = setup_netjet_u(card);
- 		break;
- #endif
--#if CARD_FN_ENTERNOW_PCI
--	case ISDN_CTYPE_ENTERNOW:
--		ret = setup_enternow_pci(card);
--		break;
--#endif
- 	case ISDN_CTYPE_DYNAMIC:
- 		ret = 2;
- 		break;
-@@ -1186,6 +1209,9 @@
- 	case ISDN_CTYPE_DYNAMIC:
- 		ret = 0;
- 		break;
-+	case ISDN_CTYPE_HFC_USB:
-+		ret = cs->cardmsg(cs, CARD_INIT, NULL);
-+		break;
- 	default:
- 		ret = init_card(cs);
- 		break;
-@@ -1257,16 +1283,13 @@
- 			else
- 				sprintf(ids, "%s%d", id, i);
- 		}
--		if (checkcard(i, ids, busy_flag)) {
-+		if (checkcard(i, ids, busy_flag, NULL)) {
- 			foundcards++;
- 			i++;
- 		} else {
--			/* make sure we don't oops the module */
--			if (cards[i].typ > 0 && cards[i].typ <= ISDN_CTYPE_COUNT) {
--				printk(KERN_WARNING
--			       		"HiSax: Card %s not installed !\n",
--			       		CardType[cards[i].typ]);
--			}
-+			printk(KERN_WARNING
-+			       "HiSax: Card %s not installed !\n",
-+			       CardType[cards[i].typ]);
- 			HiSax_shiftcards(i);
- 			nrcards--;
- 		}
-@@ -1342,6 +1365,49 @@
- #endif
- }
- 
-+#ifdef CONFIG_HISAX_HFC_USB
-+int
-+hisax_register_hfcusb(struct hisax_drvreg *l1drv)
-+{
-+	int i;
-+	char ids[30];
-+
-+	if (l1drv->version != HISAX_LOAD_VERSION)
-+		return 1;
-+
-+	switch (l1drv->cmd) {
-+	case HISAX_LOAD_CHKVER:
-+		break;	/* success */
-+
-+	case HISAX_LOAD_REGISTER:
-+		for (i = 0; i < HISAX_MAX_CARDS; i++) {
-+			if (!cards[i].typ)
-+				break;
-+		}
-+		if (i >= HISAX_MAX_CARDS)
-+			return 1;	/* no space */
-+		cards[i].typ = ISDN_CTYPE_HFC_USB;	/* setup type */
-+		cards[i].protocol = DEFAULT_PROTO;
-+		sprintf(ids, "%s%d", l1drv->drvname, i);
-+		if (checkcard(i, ids, NULL, (void *) l1drv)) {
-+			nrcards++;
-+			return 0;
-+		}
-+		if (cards[i].cs)
-+			kfree((void *) cards[i].cs);
-+		cards[i].cs = NULL;
-+		cards[i].typ = 0;	/* no card present */
-+		return 1;
-+		break;
-+
-+	default:
-+		return 1;	/* unknown command */
-+	}
-+
-+	return 0;
-+}				/* hisax_register_hfcusb */
-+#endif
-+
- static int __init HiSax_init(void)
- {
- 	int i, retval;
-@@ -1408,8 +1474,6 @@
- 		if (protocol[i]) {
- 			cards[j].protocol = protocol[i];
- 			nzproto++;
--		} else {
--			cards[j].protocol = DEFAULT_PROTO;
- 		}
- 		switch (type[i]) {
- 		case ISDN_CTYPE_16_0:
-@@ -1487,22 +1551,15 @@
- 			} else {
- 				/* QUADRO is a 4 BRI card */
- 				cards[j++].para[0] = 1;
--				/* we need to check if further cards can be added */
--				if (j < HISAX_MAX_CARDS) {
--					cards[j].typ = ISDN_CTYPE_SCT_QUADRO;
--					cards[j].protocol = protocol[i];
--					cards[j++].para[0] = 2;
--				}
--				if (j < HISAX_MAX_CARDS) {
--					cards[j].typ = ISDN_CTYPE_SCT_QUADRO;
--					cards[j].protocol = protocol[i];
--					cards[j++].para[0] = 3;
--				}
--				if (j < HISAX_MAX_CARDS) {
--					cards[j].typ = ISDN_CTYPE_SCT_QUADRO;
--					cards[j].protocol = protocol[i];
--					cards[j].para[0] = 4;
--				}
-+				cards[j].typ = ISDN_CTYPE_SCT_QUADRO;
-+				cards[j].protocol = protocol[i];
-+				cards[j++].para[0] = 2;
-+				cards[j].typ = ISDN_CTYPE_SCT_QUADRO;
-+				cards[j].protocol = protocol[i];
-+				cards[j++].para[0] = 3;
-+				cards[j].typ = ISDN_CTYPE_SCT_QUADRO;
-+				cards[j].protocol = protocol[i];
-+				cards[j].para[0] = 4;
- 			}
- 			break;
- 		}
-@@ -1526,10 +1583,15 @@
- 	       nrcards, (nrcards > 1) ? "s" : "");
- 
- 	/* Install only, if at least one card found */
--	if (!HiSax_inithardware(NULL))
--		return -ENODEV;
-+	if (!HiSax_inithardware(NULL)) {
-+		retval = -EIO;
-+		goto out_isdnl1;
-+	}
-+
- 	return 0;
- 
-+ out_isdnl1:
-+	Isdnl1Free();
-  out_tei:
- 	TeiFree();
-  out_isdnl2:
-@@ -1576,8 +1638,6 @@
- 		cards[i].typ = type[i];
- 		if (protocol[i]) {
- 			cards[i].protocol = protocol[i];
--		} else {
--			cards[i].protocol = DEFAULT_PROTO;
- 		}
- 	}
- 	cards[0].para[0] = pcm_irq;
-@@ -1595,8 +1655,7 @@
- 	printk(KERN_DEBUG "HiSax: Total %d card%s defined\n",
- 	       nrcards, (nrcards > 1) ? "s" : "");
- 
--	if (!HiSax_inithardware(busy_flag))
--		return -ENODEV;
-+	HiSax_inithardware(busy_flag);
- 	printk(KERN_NOTICE "HiSax: module installed\n");
- #endif
- 	return 0;
-@@ -1619,8 +1678,6 @@
- 		cards[i].typ = type[i];
- 		if (protocol[i]) {
- 			cards[i].protocol = protocol[i];
--		} else {
--			cards[i].protocol = DEFAULT_PROTO;
- 		}
- 	}
- 	cards[0].para[0] = pcm_irq;
-@@ -1638,8 +1695,7 @@
- 	printk(KERN_DEBUG "HiSax: Total %d card%s defined\n",
- 	       nrcards, (nrcards > 1) ? "s" : "");
- 
--	if (!HiSax_inithardware(busy_flag))
--		return -ENODEV;
-+	HiSax_inithardware(busy_flag);
- 	printk(KERN_NOTICE "HiSax: module installed\n");
- #endif
- 	return 0;
-@@ -1662,8 +1718,6 @@
- 		cards[i].typ = type[i];
- 		if (protocol[i]) {
- 			cards[i].protocol = protocol[i];
--		} else {
--			cards[i].protocol = DEFAULT_PROTO;
- 		}
- 	}
- 	cards[0].para[0] = pcm_irq;
-@@ -1681,8 +1735,7 @@
- 	printk(KERN_DEBUG "HiSax: Total %d card%s defined\n",
- 	       nrcards, (nrcards > 1) ? "s" : "");
- 
--	if (!HiSax_inithardware(busy_flag))
--		return -ENODEV;
-+	HiSax_inithardware(busy_flag);
- 	printk(KERN_NOTICE "HiSax: module installed\n");
- #endif
- 	return 0;
-@@ -1705,8 +1758,6 @@
- 		cards[i].typ = type[i];
- 		if (protocol[i]) {
- 			cards[i].protocol = protocol[i];
--		} else {
--			cards[i].protocol = DEFAULT_PROTO;
- 		}
- 	}
- 	cards[0].para[0] = pcm_irq;
-@@ -1724,8 +1775,7 @@
- 	printk(KERN_DEBUG "HiSax: Total %d card%s defined\n",
- 	       nrcards, (nrcards > 1) ? "s" : "");
- 
--	if (!HiSax_inithardware(busy_flag))
--		return -ENODEV;
-+	HiSax_inithardware(busy_flag);
- 	printk(KERN_NOTICE "HiSax: module installed\n");
- #endif
- 	return 0;
-@@ -1743,7 +1793,7 @@
- 		sprintf(ids, "HiSax%d", nrcards);
- 	else
- 		sprintf(ids, "HiSax");
--	if (!checkcard(nrcards, ids, busy_flag)) {
-+	if (!checkcard(nrcards, ids, busy_flag, NULL)) {
- 		return -1;
- 	}
- 	ret = nrcards;
-@@ -1785,7 +1835,7 @@
- 	cards[i].protocol = protocol;
- 	sprintf(id, "%s%d", name, i);
- 	nrcards++;
--	retval = checkcard(i, id, 0);
-+	retval = checkcard(i, id, 0, NULL);
- 	if (retval == 0) { // yuck
- 		cards[i].typ = 0;
- 		nrcards--;
-@@ -2117,9 +2167,6 @@
- 	{PCI_VENDOR_ID_EICON,    PCI_DEVICE_ID_EICON_DIVA20,     PCI_ANY_ID, PCI_ANY_ID},
- 	{PCI_VENDOR_ID_EICON,    PCI_DEVICE_ID_EICON_DIVA20_U,   PCI_ANY_ID, PCI_ANY_ID},
- 	{PCI_VENDOR_ID_EICON,    PCI_DEVICE_ID_EICON_DIVA201,    PCI_ANY_ID, PCI_ANY_ID},
--//#########################################################################################	
--	{PCI_VENDOR_ID_EICON,    PCI_DEVICE_ID_EICON_DIVA202,    PCI_ANY_ID, PCI_ANY_ID},
--//#########################################################################################	
- #endif
- #ifdef CONFIG_HISAX_ELSA
- 	{PCI_VENDOR_ID_ELSA,     PCI_DEVICE_ID_ELSA_MICROLINK,   PCI_ANY_ID, PCI_ANY_ID},
-@@ -2178,11 +2225,3 @@
- 
- module_init(HiSax_init);
- module_exit(HiSax_exit);
--
--EXPORT_SYMBOL(FsmNew);
--EXPORT_SYMBOL(FsmFree);
--EXPORT_SYMBOL(FsmEvent);
--EXPORT_SYMBOL(FsmChangeState);
--EXPORT_SYMBOL(FsmInitTimer);
--EXPORT_SYMBOL(FsmDelTimer);
--EXPORT_SYMBOL(FsmRestartTimer);
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/diva.c linux-2.4.29/drivers/isdn/hisax/diva.c
---- linux-2.4.29.old/drivers/isdn/hisax/diva.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/diva.c	2005-03-22 15:06:46.106083592 +0100
-@@ -1,4 +1,4 @@
--/* $Id: diva.c,v 1.1.4.2 2002/08/30 11:21:00 keil Exp $
-+/* $Id: diva.c,v 1.33 2001/09/24 13:22:56 kai Exp $
-  *
-  * low level stuff for Eicon.Diehl Diva Family ISDN cards
-  *
-@@ -22,14 +22,13 @@
- #include "isac.h"
- #include "hscx.h"
- #include "ipac.h"
--#include "ipacx.h"
- #include "isdnl1.h"
- #include <linux/pci.h>
--#include <linux/isapnp.h>
-+#include <linux/isdn_compat.h>
- 
- extern const char *CardType[];
- 
--const char *Diva_revision = "$Revision: 1.1.4.2 $";
-+const char *Diva_revision = "$Revision: 1.33 $";
- 
- #define byteout(addr,val) outb(val,addr)
- #define bytein(addr) inb(addr)
-@@ -51,7 +50,6 @@
- #define DIVA_PCI	2
- #define DIVA_IPAC_ISA	3
- #define DIVA_IPAC_PCI	4
--#define DIVA_IPACX_PCI	5
- 
- /* CTRL (Read) */
- #define DIVA_IRQ_STAT	0x01
-@@ -71,12 +69,10 @@
- #define PITA_MISC_REG		0x1c
- #ifdef __BIG_ENDIAN
- #define PITA_PARA_SOFTRESET	0x00000001
--#define PITA_SER_SOFTRESET	0x00000002
- #define PITA_PARA_MPX_MODE	0x00000004
- #define PITA_INT0_ENABLE	0x00000200
- #else
- #define PITA_PARA_SOFTRESET	0x01000000
--#define PITA_SER_SOFTRESET	0x02000000
- #define PITA_PARA_MPX_MODE	0x04000000
- #define PITA_INT0_ENABLE	0x00020000
- #endif
-@@ -244,47 +240,6 @@
- 	memwritereg(cs->hw.diva.cfg_reg, offset + (hscx ? 0x40 : 0), value);
- }
- 
--/* IO-Functions for IPACX type cards */
--static u_char
--MemReadISAC_IPACX(struct IsdnCardState *cs, u_char offset)
--{
--	return (memreadreg(cs->hw.diva.cfg_reg, offset));
--}
--
--static void
--MemWriteISAC_IPACX(struct IsdnCardState *cs, u_char offset, u_char value)
--{
--	memwritereg(cs->hw.diva.cfg_reg, offset, value);
--}
--
--static void
--MemReadISACfifo_IPACX(struct IsdnCardState *cs, u_char * data, int size)
--{
--	while(size--)
--		*data++ = memreadreg(cs->hw.diva.cfg_reg, 0);
--}
--
--static void
--MemWriteISACfifo_IPACX(struct IsdnCardState *cs, u_char * data, int size)
--{
--	while(size--)
--		memwritereg(cs->hw.diva.cfg_reg, 0, *data++);
--}
--
--static u_char
--MemReadHSCX_IPACX(struct IsdnCardState *cs, int hscx, u_char offset)
--{
--	return(memreadreg(cs->hw.diva.cfg_reg, offset + 
--                    (hscx ? IPACX_OFF_B2 : IPACX_OFF_B1)));
--}
--
--static void
--MemWriteHSCX_IPACX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
--{
--	memwritereg(cs->hw.diva.cfg_reg, offset + 
--              (hscx ? IPACX_OFF_B2 : IPACX_OFF_B1), value);
--}
--
- /*
-  * fast interrupt HSCX stuff goes here
-  */
-@@ -595,7 +550,7 @@
- 	u_char exval;
- 	struct BCState *bcs;
- 
--	if (val & 0x01) { // EXB
-+	if (val & 0x01) {
- 		bcs = cs->bcs + 1;
- 		exval = MemReadHSCX(cs, 1, HSCX_EXIR);
- 		if (exval & 0x40) {
-@@ -622,7 +577,7 @@
- 			debugl1(cs, "HSCX B interrupt %x", val);
- 		Memhscx_interrupt(cs, val, 1);
- 	}
--	if (val & 0x02) {	// EXA
-+	if (val & 0x02) {
- 		bcs = cs->bcs;
- 		exval = MemReadHSCX(cs, 0, HSCX_EXIR);
- 		if (exval & 0x40) {
-@@ -644,7 +599,7 @@
- 		} else if (cs->debug & L1_DEB_HSCX)
- 			debugl1(cs, "HSCX A EXIR %x", exval);
- 	}
--	if (val & 0x04) {	// ICA
-+	if (val & 0x04) {
- 		exval = MemReadHSCX(cs, 0, HSCX_ISTA);
- 		if (cs->debug & L1_DEB_HSCX)
- 			debugl1(cs, "HSCX A interrupt %x", exval);
-@@ -705,31 +660,12 @@
- 	memwritereg(cs->hw.diva.cfg_reg, IPAC_MASK, 0xC0);
- }
- 
--static void
--diva_irq_ipacx_pci(int intno, void *dev_id, struct pt_regs *regs)
--{
--	struct IsdnCardState *cs = dev_id;
--	u_char val;
--	u_char *cfg;
--
--	if (!cs) {
--		printk(KERN_WARNING "Diva: Spurious interrupt!\n");
--		return;
--	}
--	cfg = (u_char *) cs->hw.diva.pci_cfg;
--	val = *cfg;
--	if (!(val &PITA_INT0_STATUS)) return; // other shared IRQ
--  interrupt_ipacx(cs);      // handler for chip
--	*cfg = PITA_INT0_STATUS;  // Reset PLX interrupt
--}
--
- void
- release_io_diva(struct IsdnCardState *cs)
- {
- 	int bytecnt;
- 
--	if ((cs->subtyp == DIVA_IPAC_PCI) || 
--	    (cs->subtyp == DIVA_IPACX_PCI)   ) {
-+	if (cs->subtyp == DIVA_IPAC_PCI) {
- 		u_int *cfg = (unsigned int *)cs->hw.diva.pci_cfg;
- 
- 		*cfg = 0; /* disable INT0/1 */ 
-@@ -776,16 +712,6 @@
- 		set_current_state(TASK_UNINTERRUPTIBLE);
- 		schedule_timeout((10*HZ)/1000);
- 		memwritereg(cs->hw.diva.cfg_reg, IPAC_MASK, 0xc0);
--	} else if (cs->subtyp == DIVA_IPACX_PCI) {
--		unsigned int *ireg = (unsigned int *)(cs->hw.diva.pci_cfg +
--					PITA_MISC_REG);
--		*ireg = PITA_PARA_SOFTRESET | PITA_PARA_MPX_MODE;
--		set_current_state(TASK_UNINTERRUPTIBLE);
--		schedule_timeout((10*HZ)/1000);
--		*ireg = PITA_PARA_MPX_MODE | PITA_SER_SOFTRESET;
--		set_current_state(TASK_UNINTERRUPTIBLE);
--		schedule_timeout((10*HZ)/1000);
--		MemWriteISAC_IPACX(cs, IPACX_MASK, 0xff); // Interrupts off
- 	} else { /* DIVA 2.0 */
- 		cs->hw.diva.ctrl_reg = 0;        /* Reset On */
- 		byteout(cs->hw.diva.ctrl, cs->hw.diva.ctrl_reg);
-@@ -814,9 +740,7 @@
- {
- 	int blink = 0;
- 
--	if ((cs->subtyp == DIVA_IPAC_ISA) ||
--	    (cs->subtyp == DIVA_IPAC_PCI) ||
--	    (cs->subtyp == DIVA_IPACX_PCI)   )
-+	if ((cs->subtyp == DIVA_IPAC_ISA) || (cs->subtyp == DIVA_IPAC_PCI))
- 		return;
- 	del_timer(&cs->hw.diva.tl);
- 	if (cs->hw.diva.status & DIVA_ASSIGN)
-@@ -859,12 +783,6 @@
- 			release_io_diva(cs);
- 			return(0);
- 		case CARD_INIT:
--			if (cs->subtyp == DIVA_IPACX_PCI) {
--				ireg = (unsigned int *)cs->hw.diva.pci_cfg;
--				*ireg = PITA_INT0_ENABLE;
--			  init_ipacx(cs, 3); // init chip and enable interrupts
--        return (0);
--			}
- 			if (cs->subtyp == DIVA_IPAC_PCI) {
- 				ireg = (unsigned int *)cs->hw.diva.pci_cfg;
- 				*ireg = PITA_INT0_ENABLE;
-@@ -901,9 +819,7 @@
- 			}
- 			break;
- 	}
--	if ((cs->subtyp != DIVA_IPAC_ISA) && 
--	    (cs->subtyp != DIVA_IPAC_PCI) &&
--	    (cs->subtyp != DIVA_IPACX_PCI)   )
-+	if ((cs->subtyp != DIVA_IPAC_ISA) && (cs->subtyp != DIVA_IPAC_PCI))
- 		diva_led_handler(cs);
- 	return(0);
- }
-@@ -911,40 +827,11 @@
- static struct pci_dev *dev_diva __initdata = NULL;
- static struct pci_dev *dev_diva_u __initdata = NULL;
- static struct pci_dev *dev_diva201 __initdata = NULL;
--static struct pci_dev *dev_diva202 __initdata = NULL;
--
--#ifdef __ISAPNP__
--static struct isapnp_device_id diva_ids[] __initdata = {
--	{ ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0x51),
--	  ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0x51), 
--	  (unsigned long) "Diva picola" },
--	{ ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0x51),
--	  ISAPNP_VENDOR('E', 'I', 'C'), ISAPNP_FUNCTION(0x51), 
--	  (unsigned long) "Diva picola" },
--	{ ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0x71),
--	  ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0x71), 
--	  (unsigned long) "Diva 2.0" },
--	{ ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0x71),
--	  ISAPNP_VENDOR('E', 'I', 'C'), ISAPNP_FUNCTION(0x71), 
--	  (unsigned long) "Diva 2.0" },
--	{ ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0xA1),
--	  ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0xA1), 
--	  (unsigned long) "Diva 2.01" },
--	{ ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0xA1),
--	  ISAPNP_VENDOR('E', 'I', 'C'), ISAPNP_FUNCTION(0xA1), 
--	  (unsigned long) "Diva 2.01" },
--	{ 0, }
--};
--
--static struct isapnp_device_id *pdev = &diva_ids[0];
--static struct pci_bus *pnp_c __devinitdata = NULL;
--#endif
--
- 
- int __init
- setup_diva(struct IsdnCard *card)
- {
--	int bytecnt = 8;
-+	int bytecnt;
- 	u_char val;
- 	struct IsdnCardState *cs = card->cs;
- 	char tmp[64];
-@@ -977,75 +864,8 @@
- 			cs->hw.diva.hscx_adr = card->para[1] + DIVA_HSCX_ADR;
- 		}
- 		cs->irq = card->para[0];
-+		bytecnt = 8;
- 	} else {
--#ifdef __ISAPNP__
--		if (isapnp_present()) {
--			struct pci_bus *pb;
--			struct pci_dev *pd;
--
--			while(pdev->card_vendor) {
--				if ((pb = isapnp_find_card(pdev->card_vendor,
--					pdev->card_device, pnp_c))) {
--					pnp_c = pb;
--					pd = NULL;
--					if ((pd = isapnp_find_dev(pnp_c,
--						pdev->vendor, pdev->function, pd))) {
--						printk(KERN_INFO "HiSax: %s detected\n",
--							(char *)pdev->driver_data);
--						pd->prepare(pd);
--						pd->deactivate(pd);
--						pd->activate(pd);
--						card->para[1] =
--							pd->resource[0].start;
--						card->para[0] =
--							pd->irq_resource[0].start;
--						if (!card->para[0] || !card->para[1]) {
--							printk(KERN_ERR "Diva PnP:some resources are missing %ld/%lx\n",
--								card->para[0], card->para[1]);
--							pd->deactivate(pd);
--							return(0);
--						}
--						cs->hw.diva.cfg_reg  = card->para[1];
--						cs->irq = card->para[0];
--						if (pdev->function == ISAPNP_FUNCTION(0xA1)) {
--							cs->subtyp = DIVA_IPAC_ISA;
--							cs->hw.diva.ctrl = 0;
--							cs->hw.diva.isac =
--								card->para[1] + DIVA_IPAC_DATA;
--							cs->hw.diva.hscx =
--								card->para[1] + DIVA_IPAC_DATA;
--							cs->hw.diva.isac_adr =
--								card->para[1] + DIVA_IPAC_ADR;
--							cs->hw.diva.hscx_adr =
--								card->para[1] + DIVA_IPAC_ADR;
--							test_and_set_bit(HW_IPAC, &cs->HW_Flags);
--						} else {
--							cs->subtyp = DIVA_ISA;
--							cs->hw.diva.ctrl =
--								card->para[1] + DIVA_ISA_CTRL;
--							cs->hw.diva.isac =
--								card->para[1] + DIVA_ISA_ISAC_DATA;
--							cs->hw.diva.hscx =
--								card->para[1] + DIVA_HSCX_DATA;
--							cs->hw.diva.isac_adr =
--								card->para[1] + DIVA_ISA_ISAC_ADR;
--							cs->hw.diva.hscx_adr =
--								card->para[1] + DIVA_HSCX_ADR;
--						}
--						goto ready;
--					} else {
--						printk(KERN_ERR "Diva PnP: PnP error card found, no device\n");
--						return(0);
--					}
--				}
--				pdev++;
--				pnp_c=NULL;
--			} 
--			if (!pdev->card_vendor) {
--				printk(KERN_INFO "Diva PnP: no ISAPnP card found\n");
--			}
--		}
--#endif
- #if CONFIG_PCI
- 		if (!pci_present()) {
- 			printk(KERN_ERR "Diva: no PCI bus present\n");
-@@ -1059,14 +879,14 @@
- 				return(0);
- 			cs->subtyp = DIVA_PCI;
- 			cs->irq = dev_diva->irq;
--			cs->hw.diva.cfg_reg = pci_resource_start(dev_diva, 2);
-+			cs->hw.diva.cfg_reg = pci_resource_start_io(dev_diva, 2);
- 		} else if ((dev_diva_u = pci_find_device(PCI_VENDOR_ID_EICON,
- 			PCI_DEVICE_ID_EICON_DIVA20_U, dev_diva_u))) {
- 			if (pci_enable_device(dev_diva_u))
- 				return(0);
- 			cs->subtyp = DIVA_PCI;
- 			cs->irq = dev_diva_u->irq;
--			cs->hw.diva.cfg_reg = pci_resource_start(dev_diva_u, 2);
-+			cs->hw.diva.cfg_reg = pci_resource_start_io(dev_diva_u, 2);
- 		} else if ((dev_diva201 = pci_find_device(PCI_VENDOR_ID_EICON,
- 			PCI_DEVICE_ID_EICON_DIVA201, dev_diva201))) {
- 			if (pci_enable_device(dev_diva201))
-@@ -1074,19 +894,9 @@
- 			cs->subtyp = DIVA_IPAC_PCI;
- 			cs->irq = dev_diva201->irq;
- 			cs->hw.diva.pci_cfg =
--				(ulong) ioremap(pci_resource_start(dev_diva201, 0), 4096);
-+				(ulong) ioremap(pci_resource_start_mem(dev_diva201, 0), 4096);
- 			cs->hw.diva.cfg_reg =
--				(ulong) ioremap(pci_resource_start(dev_diva201, 1), 4096);
--		} else if ((dev_diva202 = pci_find_device(PCI_VENDOR_ID_EICON,
--			PCI_DEVICE_ID_EICON_DIVA202, dev_diva202))) {
--			if (pci_enable_device(dev_diva202))
--				return(0);
--			cs->subtyp = DIVA_IPACX_PCI;
--			cs->irq = dev_diva202->irq;
--			cs->hw.diva.pci_cfg =
--				(ulong) ioremap(pci_resource_start(dev_diva202, 0), 4096);
--			cs->hw.diva.cfg_reg =
--				(ulong) ioremap(pci_resource_start(dev_diva202, 1), 4096);
-+				(ulong) ioremap(pci_resource_start_mem(dev_diva201, 1), 4096);
- 		} else {
- 			printk(KERN_WARNING "Diva: No PCI card found\n");
- 			return(0);
-@@ -1107,8 +917,7 @@
- 		printk(KERN_WARNING "Diva: unable to config DIVA PCI\n");
- 		return (0);
- #endif /* CONFIG_PCI */
--		if ((cs->subtyp == DIVA_IPAC_PCI) ||
--		    (cs->subtyp == DIVA_IPACX_PCI)   ) {
-+		if (cs->subtyp == DIVA_IPAC_PCI) {
- 			cs->hw.diva.ctrl = 0;
- 			cs->hw.diva.isac = 0;
- 			cs->hw.diva.hscx = 0;
-@@ -1125,23 +934,18 @@
- 			bytecnt = 32;
- 		}
- 	}
--ready:
-+
- 	printk(KERN_INFO
- 		"Diva: %s card configured at %#lx IRQ %d\n",
- 		(cs->subtyp == DIVA_PCI) ? "PCI" :
- 		(cs->subtyp == DIVA_ISA) ? "ISA" : 
--		(cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" :
--		(cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
-+		(cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" : "IPAC PCI",
- 		cs->hw.diva.cfg_reg, cs->irq);
--	if ((cs->subtyp == DIVA_IPAC_PCI)  || 
--	    (cs->subtyp == DIVA_IPACX_PCI) || 
--	    (cs->subtyp == DIVA_PCI)         )
--		printk(KERN_INFO "Diva: %s space at %#lx\n",
--			(cs->subtyp == DIVA_PCI) ? "PCI" :
--			(cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
-+	if ((cs->subtyp == DIVA_IPAC_PCI) || (cs->subtyp == DIVA_PCI))
-+		printk(KERN_INFO "Diva: %s PCI space at %#lx\n",
-+			(cs->subtyp == DIVA_PCI) ? "PCI" : "IPAC PCI",
- 			cs->hw.diva.pci_cfg);
--	if ((cs->subtyp != DIVA_IPAC_PCI) &&
--	    (cs->subtyp != DIVA_IPACX_PCI)   ) {
-+	if (cs->subtyp != DIVA_IPAC_PCI) {
- 		if (check_region(cs->hw.diva.cfg_reg, bytecnt)) {
- 			printk(KERN_WARNING
- 			       "HiSax: %s config port %lx-%lx already in use\n",
-@@ -1177,17 +981,6 @@
- 		cs->irq_func = &diva_irq_ipac_pci;
- 		val = memreadreg(cs->hw.diva.cfg_reg, IPAC_ID);
- 		printk(KERN_INFO "Diva: IPAC version %x\n", val);
--	} else if (cs->subtyp == DIVA_IPACX_PCI) {
--		cs->readisac  = &MemReadISAC_IPACX;
--		cs->writeisac = &MemWriteISAC_IPACX;
--		cs->readisacfifo  = &MemReadISACfifo_IPACX;
--		cs->writeisacfifo = &MemWriteISACfifo_IPACX;
--		cs->BC_Read_Reg  = &MemReadHSCX_IPACX;
--		cs->BC_Write_Reg = &MemWriteHSCX_IPACX;
--		cs->BC_Send_Data = 0; // function located in ipacx module
--		cs->irq_func = &diva_irq_ipacx_pci;
--		printk(KERN_INFO "Diva: IPACX Design Id: %x\n", 
--            MemReadISAC_IPACX(cs, IPACX_ID) &0x3F);
- 	} else { /* DIVA 2.0 */
- 		cs->hw.diva.tl.function = (void *) diva_led_handler;
- 		cs->hw.diva.tl.data = (long) cs;
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/elsa.c linux-2.4.29/drivers/isdn/hisax/elsa.c
---- linux-2.4.29.old/drivers/isdn/hisax/elsa.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/elsa.c	2005-03-22 15:06:46.123081008 +0100
-@@ -1,4 +1,4 @@
--/* $Id: elsa.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: elsa.c,v 2.32 2001/09/24 13:22:56 kai Exp $
-  *
-  * low level stuff for Elsa isdn cards
-  *
-@@ -28,13 +28,13 @@
- #include "hscx.h"
- #include "isdnl1.h"
- #include <linux/pci.h>
--#include <linux/isapnp.h>
-+#include <linux/isdn_compat.h>
- #include <linux/serial.h>
- #include <linux/serial_reg.h>
- 
- extern const char *CardType[];
- 
--const char *Elsa_revision = "$Revision: 1.1.4.1 $";
-+const char *Elsa_revision = "$Revision: 2.32 $";
- const char *Elsa_Types[] =
- {"None", "PC", "PCC-8", "PCC-16", "PCF", "PCF-Pro",
-  "PCMCIA", "QS 1000", "QS 3000", "Microlink PCI", "QS 3000 PCI", 
-@@ -864,21 +864,6 @@
- static 	struct pci_dev *dev_qs1000 __devinitdata = NULL;
- static 	struct pci_dev *dev_qs3000 __devinitdata = NULL;
- 
--#ifdef __ISAPNP__
--static struct isapnp_device_id elsa_ids[] __initdata = {
--	{ ISAPNP_VENDOR('E', 'L', 'S'), ISAPNP_FUNCTION(0x0133),
--	  ISAPNP_VENDOR('E', 'L', 'S'), ISAPNP_FUNCTION(0x0133), 
--	  (unsigned long) "Elsa QS1000" },
--	{ ISAPNP_VENDOR('E', 'L', 'S'), ISAPNP_FUNCTION(0x0134),
--	  ISAPNP_VENDOR('E', 'L', 'S'), ISAPNP_FUNCTION(0x0134), 
--	  (unsigned long) "Elsa QS3000" },
--	{ 0, }
--};
--
--static struct isapnp_device_id *pdev = &elsa_ids[0];
--static struct pci_bus *pnp_c __devinitdata = NULL;
--#endif
--
- int __devinit
- setup_elsa(struct IsdnCard *card)
- {
-@@ -893,7 +878,6 @@
- 	cs->hw.elsa.ctrl_reg = 0;
- 	cs->hw.elsa.status = 0;
- 	cs->hw.elsa.MFlag = 0;
--	cs->subtyp = 0;
- 	if (cs->typ == ISDN_CTYPE_ELSA) {
- 		cs->hw.elsa.base = card->para[0];
- 		printk(KERN_INFO "Elsa: Microlink IO probing\n");
-@@ -955,60 +939,9 @@
- 			return (0);
- 		}
- 	} else if (cs->typ == ISDN_CTYPE_ELSA_PNP) {
--#ifdef __ISAPNP__
--		if (!card->para[1] && isapnp_present()) {
--			struct pci_bus *pb;
--			struct pci_dev *pd;
--
--			while(pdev->card_vendor) {
--				if ((pb = isapnp_find_card(pdev->card_vendor,
--					pdev->card_device, pnp_c))) {
--					pnp_c = pb;
--					pd = NULL;
--					if ((pd = isapnp_find_dev(pnp_c,
--						pdev->vendor, pdev->function, pd))) {
--						printk(KERN_INFO "HiSax: %s detected\n",
--							(char *)pdev->driver_data);
--						pd->prepare(pd);
--						pd->deactivate(pd);
--						pd->activate(pd);
--						card->para[1] =
--							pd->resource[0].start;
--						card->para[0] =
--							pd->irq_resource[0].start;
--						if (!card->para[0] || !card->para[1]) {
--							printk(KERN_ERR "Elsa PnP:some resources are missing %ld/%lx\n",
--								card->para[0], card->para[1]);
--							pd->deactivate(pd);
--							return(0);
--						}
--						if (pdev->function == ISAPNP_FUNCTION(0x133))
--							cs->subtyp = ELSA_QS1000;
--						else
--							cs->subtyp = ELSA_QS3000;
--						break;
--					} else {
--						printk(KERN_ERR "Elsa PnP: PnP error card found, no device\n");
--						return(0);
--					}
--				}
--				pdev++;
--				pnp_c=NULL;
--			} 
--			if (!pdev->card_vendor) {
--				printk(KERN_INFO "Elsa PnP: no ISAPnP card found\n");
--				return(0);
--			}
--		}
--#endif
--		if (card->para[1] && card->para[0]) { 
--			cs->hw.elsa.base = card->para[1];
--			cs->irq = card->para[0];
--			if (!cs->subtyp)
--				cs->subtyp = ELSA_QS1000;
--		} else {
--			printk(KERN_ERR "Elsa PnP: no parameter\n");
--		}
-+		cs->hw.elsa.base = card->para[1];
-+		cs->irq = card->para[0];
-+		cs->subtyp = ELSA_QS1000;
- 		cs->hw.elsa.cfg = cs->hw.elsa.base + ELSA_CONFIG;
- 		cs->hw.elsa.ale = cs->hw.elsa.base + ELSA_ALE;
- 		cs->hw.elsa.isac = cs->hw.elsa.base + ELSA_ISAC;
-@@ -1058,16 +991,16 @@
- 				return(0);
- 			cs->subtyp = ELSA_QS1000PCI;
- 			cs->irq = dev_qs1000->irq;
--			cs->hw.elsa.cfg = pci_resource_start(dev_qs1000, 1);
--			cs->hw.elsa.base = pci_resource_start(dev_qs1000, 3);
-+			cs->hw.elsa.cfg = pci_resource_start_io(dev_qs1000, 1);
-+			cs->hw.elsa.base = pci_resource_start_io(dev_qs1000, 3);
- 		} else if ((dev_qs3000 = pci_find_device(PCI_VENDOR_ID_ELSA,
- 			PCI_DEVICE_ID_ELSA_QS3000, dev_qs3000))) {
- 			if (pci_enable_device(dev_qs3000))
- 				return(0);
- 			cs->subtyp = ELSA_QS3000PCI;
- 			cs->irq = dev_qs3000->irq;
--			cs->hw.elsa.cfg = pci_resource_start(dev_qs3000, 1);
--			cs->hw.elsa.base = pci_resource_start(dev_qs3000, 3);
-+			cs->hw.elsa.cfg = pci_resource_start_io(dev_qs3000, 1);
-+			cs->hw.elsa.base = pci_resource_start_io(dev_qs3000, 3);
- 		} else {
- 			printk(KERN_WARNING "Elsa: No PCI card found\n");
- 			return(0);
-@@ -1123,7 +1056,6 @@
- 			break;
- 		case ELSA_PCFPRO:
- 		case ELSA_PCF:
--		case ELSA_QS3000:
- 		case ELSA_QS3000PCI:
- 			bytecnt = 16;
- 			break;
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/elsa_cs.c linux-2.4.29/drivers/isdn/hisax/elsa_cs.c
---- linux-2.4.29.old/drivers/isdn/hisax/elsa_cs.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/elsa_cs.c	2005-03-22 15:06:46.138078728 +0100
-@@ -72,7 +72,7 @@
- MODULE_PARM(pc_debug, "i");
- #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
- static char *version =
--"elsa_cs.c $Revision: 1.1.4.1 $ $Date: 2001/11/20 14:19:35 $ (K.Lichtenwalder)";
-+"elsa_cs.c $Revision: 1.2 $ $Date: 2001/09/24 13:22:56 $ (K.Lichtenwalder)";
- #else
- #define DEBUG(n, args...)
- #endif
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/elsa_ser.c linux-2.4.29/drivers/isdn/hisax/elsa_ser.c
---- linux-2.4.29.old/drivers/isdn/hisax/elsa_ser.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/elsa_ser.c	2005-03-22 15:06:46.158075688 +0100
-@@ -1,4 +1,4 @@
--/* $Id: elsa_ser.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: elsa_ser.c,v 2.14 2001/09/24 13:22:56 kai Exp $
-  *
-  * stuff for the serial modem on ELSA cards
-  *
-@@ -396,6 +396,74 @@
- 	}
- }
- 
-+#if 0
-+static inline void check_modem_status(struct IsdnCardState *cs)
-+{
-+	int	status;
-+	struct async_struct *info = cs->hw.elsa.info;
-+	struct	async_icount *icount;
-+	
-+	status = serial_inp(info, UART_MSR);
-+
-+	if (status & UART_MSR_ANY_DELTA) {
-+		icount = &info->state->icount;
-+		/* update input line counters */
-+		if (status & UART_MSR_TERI)
-+			icount->rng++;
-+		if (status & UART_MSR_DDSR)
-+			icount->dsr++;
-+		if (status & UART_MSR_DDCD) {
-+			icount->dcd++;
-+		}
-+		if (status & UART_MSR_DCTS)
-+			icount->cts++;
-+//		wake_up(&info->delta_msr_wait);
-+	}
-+
-+	if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
-+#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
-+		printk("ttys%d CD now %s...", info->line,
-+		       (status & UART_MSR_DCD) ? "on" : "off");
-+#endif		
-+		if (status & UART_MSR_DCD)
-+//			wake_up(&info->open_wait);
-+;
-+		else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-+			   (info->flags & ASYNC_CALLOUT_NOHUP))) {
-+#ifdef SERIAL_DEBUG_OPEN
-+			printk("doing serial hangup...");
-+#endif
-+			if (info->tty)
-+				tty_hangup(info->tty);
-+		}
-+	}
-+#if 0
-+	if (info->flags & ASYNC_CTS_FLOW) {
-+		if (info->tty->hw_stopped) {
-+			if (status & UART_MSR_CTS) {
-+#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
-+				printk("CTS tx start...");
-+#endif
-+				info->tty->hw_stopped = 0;
-+				info->IER |= UART_IER_THRI;
-+				serial_outp(info, UART_IER, info->IER);
-+//				rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
-+				return;
-+			}
-+		} else {
-+			if (!(status & UART_MSR_CTS)) {
-+#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
-+				printk("CTS tx stop...");
-+#endif
-+				info->tty->hw_stopped = 1;
-+				info->IER &= ~UART_IER_THRI;
-+				serial_outp(info, UART_IER, info->IER);
-+			}
-+		}
-+	}
-+#endif 0
-+}
-+#endif
- 
- static void rs_interrupt_elsa(int irq, struct IsdnCardState *cs)
- {
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/fsm.c linux-2.4.29/drivers/isdn/hisax/fsm.c
---- linux-2.4.29.old/drivers/isdn/hisax/fsm.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/fsm.c	2005-03-22 15:06:46.174073256 +0100
-@@ -1,4 +1,4 @@
--/* $Id: fsm.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id$
-  *
-  * Finite state machine
-  *
-@@ -21,6 +21,14 @@
- 
- #define FSM_TIMER_DEBUG 0
- 
-+EXPORT_SYMBOL(FsmNew);
-+EXPORT_SYMBOL(FsmFree);
-+EXPORT_SYMBOL(FsmEvent);
-+EXPORT_SYMBOL(FsmChangeState);
-+EXPORT_SYMBOL(FsmInitTimer);
-+EXPORT_SYMBOL(FsmDelTimer);
-+EXPORT_SYMBOL(FsmRestartTimer);
-+
- int __init
- FsmNew(struct Fsm *fsm, struct FsmNode *fnlist, int fncount)
- {
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/fsm.h linux-2.4.29/drivers/isdn/hisax/fsm.h
---- linux-2.4.29.old/drivers/isdn/hisax/fsm.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/fsm.h	2005-03-22 15:06:46.189070976 +0100
-@@ -1,4 +1,4 @@
--/* $Id: fsm.h,v 1.1.2.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id$
-  *
-  * Finite state machine
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/gazel.c linux-2.4.29/drivers/isdn/hisax/gazel.c
---- linux-2.4.29.old/drivers/isdn/hisax/gazel.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/gazel.c	2005-03-22 15:06:46.205068544 +0100
-@@ -1,4 +1,4 @@
--/* $Id: gazel.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: gazel.c,v 2.19 2001/09/24 13:22:56 kai Exp $
-  *
-  * low level stuff for Gazel isdn cards
-  *
-@@ -20,9 +20,10 @@
- #include "isdnl1.h"
- #include "ipac.h"
- #include <linux/pci.h>
-+#include <linux/isdn_compat.h>
- 
- extern const char *CardType[];
--const char *gazel_revision = "$Revision: 1.1.4.1 $";
-+const char *gazel_revision = "$Revision: 2.19 $";
- 
- #define R647      1
- #define R685      2
-@@ -563,8 +564,8 @@
- 			if (pci_enable_device(dev_tel))
- 				return 1;
- 			pci_irq = dev_tel->irq;
--			pci_ioaddr0 = pci_resource_start(dev_tel, 1);
--			pci_ioaddr1 = pci_resource_start(dev_tel, 2);
-+			pci_ioaddr0 = pci_resource_start_io(dev_tel, 1);
-+			pci_ioaddr1 = pci_resource_start_io(dev_tel, 2);
- 			found = 1;
- 		}
- 		if (found)
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfc_2bds0.c linux-2.4.29/drivers/isdn/hisax/hfc_2bds0.c
---- linux-2.4.29.old/drivers/isdn/hisax/hfc_2bds0.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfc_2bds0.c	2005-03-22 15:06:46.221066112 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hfc_2bds0.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: hfc_2bds0.c,v 1.18 2001/09/24 13:22:56 kai Exp $
-  *
-  * specific routines for CCD's HFC 2BDS0
-  *
-@@ -616,6 +616,17 @@
- */
- 	if (!cs)
- 		return;
-+#if 0	
-+	if (test_and_clear_bit(D_CLEARBUSY, &cs->event)) {
-+		if (cs->debug)
-+			debugl1(cs, "D-Channel Busy cleared");
-+		stptr = cs->stlist;
-+		while (stptr != NULL) {
-+			stptr->l1.l1l2(stptr, PH_PAUSE | CONFIRM, NULL);
-+			stptr = stptr->next;
-+		}
-+	}
-+#endif
- 	if (test_and_clear_bit(D_L1STATECHANGE, &cs->event)) {
- 		switch (cs->dc.hfcd.ph_state) {
- 			case (0):
-@@ -1090,6 +1101,32 @@
- 			cs->hw.hfcD.mst_m |= HFCD_MASTER;
- 			cs->writeisac(cs, HFCD_MST_MODE, cs->hw.hfcD.mst_m);
- 			break;
-+#if 0
-+		case (HW_TESTLOOP | REQUEST):
-+			u_char val = 0;
-+			if (1 & (int) arg)
-+				val |= 0x0c;
-+			if (2 & (int) arg)
-+				val |= 0x3;
-+			if (test_bit(HW_IOM1, &cs->HW_Flags)) {
-+				/* IOM 1 Mode */
-+				if (!val) {
-+					cs->writeisac(cs, ISAC_SPCR, 0xa);
-+					cs->writeisac(cs, ISAC_ADF1, 0x2);
-+				} else {
-+					cs->writeisac(cs, ISAC_SPCR, val);
-+					cs->writeisac(cs, ISAC_ADF1, 0xa);
-+				}
-+			} else {
-+				/* IOM 2 Mode */
-+				cs->writeisac(cs, ISAC_SPCR, val);
-+				if (val)
-+					cs->writeisac(cs, ISAC_ADF1, 0x8);
-+				else
-+					cs->writeisac(cs, ISAC_ADF1, 0x0);
-+			}
-+			break;
-+#endif
- 		default:
- 			if (cs->debug & L1_DEB_WARN)
- 				debugl1(cs, "hfcd_l1hw unknown pr %4x", pr);
-@@ -1106,6 +1143,20 @@
- static void
- hfc_dbusy_timer(struct IsdnCardState *cs)
- {
-+#if 0
-+	struct PStack *stptr;
-+	if (test_bit(FLG_DBUSY_TIMER, &cs->HW_Flags)) {
-+		if (cs->debug)
-+			debugl1(cs, "D-Channel Busy");
-+		test_and_set_bit(FLG_L1_DBUSY, &cs->HW_Flags);
-+		stptr = cs->stlist;
-+		
-+		while (stptr != NULL) {
-+			stptr->l1.l1l2(stptr, PH_PAUSE | INDICATION, NULL);
-+			stptr = stptr->next;
-+		}
-+	}
-+#endif
- }
- 
- unsigned int __init
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfc_2bds0.h linux-2.4.29/drivers/isdn/hisax/hfc_2bds0.h
---- linux-2.4.29.old/drivers/isdn/hisax/hfc_2bds0.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfc_2bds0.h	2005-03-22 15:06:46.236063832 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hfc_2bds0.h,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: hfc_2bds0.h,v 1.6 2001/09/24 13:22:56 kai Exp $
-  *
-  * specific defines for CCD's HFC 2BDS0
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfc_2bs0.c linux-2.4.29/drivers/isdn/hisax/hfc_2bs0.c
---- linux-2.4.29.old/drivers/isdn/hisax/hfc_2bs0.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfc_2bs0.c	2005-03-22 15:06:46.272058360 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hfc_2bs0.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: hfc_2bs0.c,v 1.20 2001/09/24 13:22:56 kai Exp $
-  *
-  * specific routines for CCD's HFC 2BS0
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfc_2bs0.h linux-2.4.29/drivers/isdn/hisax/hfc_2bs0.h
---- linux-2.4.29.old/drivers/isdn/hisax/hfc_2bs0.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfc_2bs0.h	2005-03-22 15:06:46.288055928 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hfc_2bs0.h,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: hfc_2bs0.h,v 1.5 2001/09/24 13:22:56 kai Exp $
-  *
-  * specific defines for CCD's HFC 2BS0
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfc_pci.c linux-2.4.29/drivers/isdn/hisax/hfc_pci.c
---- linux-2.4.29.old/drivers/isdn/hisax/hfc_pci.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfc_pci.c	2005-03-22 15:06:46.305053344 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hfc_pci.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: hfc_pci.c,v 1.48 2001/09/24 13:22:56 kai Exp $
-  *
-  * low level driver for CCD´s hfc-pci based cards
-  *
-@@ -22,11 +22,12 @@
- #include "hfc_pci.h"
- #include "isdnl1.h"
- #include <linux/pci.h>
-+#include <linux/isdn_compat.h>
- #include <linux/interrupt.h>
- 
- extern const char *CardType[];
- 
--static const char *hfcpci_revision = "$Revision: 1.1.4.1 $";
-+static const char *hfcpci_revision = "$Revision: 1.48 $";
- 
- /* table entry in the PCI devices list */
- typedef struct {
-@@ -76,8 +77,6 @@
- {
- 	unsigned long flags;
- 
--	printk(KERN_INFO "HiSax: release hfcpci at %p\n",
--		cs->hw.hfcpci.pci_io);
- 	save_flags(flags);
- 	cli();
- 	cs->hw.hfcpci.int_m2 = 0;	/* interrupt output off ! */
-@@ -88,11 +87,13 @@
- 	set_current_state(TASK_UNINTERRUPTIBLE);
- 	schedule_timeout((30 * HZ) / 1000);	/* Timeout 30ms */
- 	Write_hfc(cs, HFCPCI_CIRM, 0);	/* Reset Off */
-+#if CONFIG_PCI
- 	pcibios_write_config_word(cs->hw.hfcpci.pci_bus, cs->hw.hfcpci.pci_device_fn, PCI_COMMAND, 0);	/* disable memory mapped ports + busmaster */
-+#endif				/* CONFIG_PCI */
- 	del_timer(&cs->hw.hfcpci.timer);
- 	kfree(cs->hw.hfcpci.share_start);
- 	cs->hw.hfcpci.share_start = NULL;
--	iounmap((void *)cs->hw.hfcpci.pci_io);
-+	vfree(cs->hw.hfcpci.pci_io);
- }
- 
- /********************************************************************************/
-@@ -687,10 +688,6 @@
- 				debugl1(cs, "hfcpci_fill_fifo_trans %d frame length %d discarded",
- 					bcs->channel, bcs->tx_skb->len);
- 
--			if (bcs->st->lli.l1writewakeup &&
--                           (PACKET_NOACK != bcs->tx_skb->pkt_type))
--				bcs->st->lli.l1writewakeup(bcs->st, bcs->tx_skb->len);
--
- 			dev_kfree_skb_any(bcs->tx_skb);
- 			cli();
- 			bcs->tx_skb = skb_dequeue(&bcs->squeue);	/* fetch next data */
-@@ -1146,6 +1143,20 @@
- static void
- hfcpci_dbusy_timer(struct IsdnCardState *cs)
- {
-+#if 0
-+	struct PStack *stptr;
-+	if (test_bit(FLG_DBUSY_TIMER, &cs->HW_Flags)) {
-+		if (cs->debug)
-+			debugl1(cs, "D-Channel Busy");
-+		test_and_set_bit(FLG_L1_DBUSY, &cs->HW_Flags);
-+		stptr = cs->stlist;
-+
-+		while (stptr != NULL) {
-+			stptr->l1.l1l2(stptr, PH_PAUSE | INDICATION, NULL);
-+			stptr = stptr->next;
-+		}
-+	}
-+#endif
- }
- 
- /*************************************/
-@@ -1550,6 +1561,17 @@
-  */
- 	if (!cs)
- 		return;
-+#if 0
-+	if (test_and_clear_bit(D_CLEARBUSY, &cs->event)) {
-+		if (cs->debug)
-+			debugl1(cs, "D-Channel Busy cleared");
-+		stptr = cs->stlist;
-+		while (stptr != NULL) {
-+			stptr->l1.l1l2(stptr, PH_PAUSE | CONFIRM, NULL);
-+			stptr = stptr->next;
-+		}
-+	}
-+#endif
- 	if (test_and_clear_bit(D_L1STATECHANGE, &cs->event)) {
- 		if (!cs->hw.hfcpci.nt_mode)
- 			switch (cs->dc.hfcpci.ph_state) {
-@@ -1712,7 +1734,7 @@
- 				if (pci_enable_device(tmp_hfcpci))
- 					continue;
- 				pci_set_master(tmp_hfcpci);
--				if ((card->para[0]) && (card->para[0] != (tmp_hfcpci->resource[ 0].start & PCI_BASE_ADDRESS_IO_MASK)))
-+				if ((card->para[0]) && (card->para[0] != (get_pcibase(tmp_hfcpci, 0) & PCI_BASE_ADDRESS_IO_MASK)))
- 					continue;
- 				else
- 					break;
-@@ -1729,7 +1751,7 @@
- 				printk(KERN_WARNING "HFC-PCI: No IRQ for PCI card found\n");
- 				return (0);
- 			}
--			cs->hw.hfcpci.pci_io = (char *) dev_hfcpci->resource[ 1].start;
-+			cs->hw.hfcpci.pci_io = (char *) get_pcibase(dev_hfcpci, 1);
- 			printk(KERN_INFO "HiSax: HFC-PCI card manufacturer: %s card name: %s\n", id_list[i].vendor_name, id_list[i].card_name);
- 		} else {
- 			printk(KERN_WARNING "HFC-PCI: No PCI card found\n");
-@@ -1746,7 +1768,7 @@
- 			printk(KERN_WARNING "HFC-PCI: Error allocating memory for FIFO!\n");
- 			return 0;
- 		}
--		cs->hw.hfcpci.fifos = (void *)
-+		(ulong) cs->hw.hfcpci.fifos =
- 		    (((ulong) cs->hw.hfcpci.share_start) & ~0x7FFF) + 0x8000;
- 		pcibios_write_config_dword(cs->hw.hfcpci.pci_bus,
- 				       cs->hw.hfcpci.pci_device_fn, 0x80,
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfc_pci.h linux-2.4.29/drivers/isdn/hisax/hfc_pci.h
---- linux-2.4.29.old/drivers/isdn/hisax/hfc_pci.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfc_pci.h	2005-03-22 15:06:46.320051064 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hfc_pci.h,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: hfc_pci.h,v 1.10 2001/09/24 13:22:56 kai Exp $
-  *
-  * specific defines for CCD's HFC 2BDS0 PCI chips
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfc_sx.c linux-2.4.29/drivers/isdn/hisax/hfc_sx.c
---- linux-2.4.29.old/drivers/isdn/hisax/hfc_sx.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfc_sx.c	2005-03-22 15:06:46.350046504 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hfc_sx.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: hfc_sx.c,v 1.12 2001/09/24 13:22:56 kai Exp $
-  *
-  * level driver for CCD´s hfc-s+/sp based cards
-  *
-@@ -17,11 +17,10 @@
- #include "hfc_sx.h"
- #include "isdnl1.h"
- #include <linux/interrupt.h>
--#include <linux/isapnp.h>
- 
- extern const char *CardType[];
- 
--static const char *hfcsx_revision = "$Revision: 1.1.4.1 $";
-+static const char *hfcsx_revision = "$Revision: 1.12 $";
- 
- /***************************************/
- /* IRQ-table for CCDs demo board       */
-@@ -940,6 +939,20 @@
- static void
- hfcsx_dbusy_timer(struct IsdnCardState *cs)
- {
-+#if 0
-+	struct PStack *stptr;
-+	if (test_bit(FLG_DBUSY_TIMER, &cs->HW_Flags)) {
-+		if (cs->debug)
-+			debugl1(cs, "D-Channel Busy");
-+		test_and_set_bit(FLG_L1_DBUSY, &cs->HW_Flags);
-+		stptr = cs->stlist;
-+
-+		while (stptr != NULL) {
-+			stptr->l1.l1l2(stptr, PH_PAUSE | INDICATION, NULL);
-+			stptr = stptr->next;
-+		}
-+	}
-+#endif
- }
- 
- /*************************************/
-@@ -1333,6 +1346,17 @@
-  */
- 	if (!cs)
- 		return;
-+#if 0
-+	if (test_and_clear_bit(D_CLEARBUSY, &cs->event)) {
-+		if (cs->debug)
-+			debugl1(cs, "D-Channel Busy cleared");
-+		stptr = cs->stlist;
-+		while (stptr != NULL) {
-+			stptr->l1.l1l2(stptr, PH_PAUSE | CONFIRM, NULL);
-+			stptr = stptr->next;
-+		}
-+	}
-+#endif
- 	if (test_and_clear_bit(D_L1STATECHANGE, &cs->event)) {
- 		if (!cs->hw.hfcsx.nt_mode)
- 			switch (cs->dc.hfcsx.ph_state) {
-@@ -1461,17 +1485,7 @@
- 	return (0);
- }
- 
--#ifdef __ISAPNP__
--static struct isapnp_device_id hfc_ids[] __initdata = {
--	{ ISAPNP_VENDOR('T', 'A', 'G'), ISAPNP_FUNCTION(0x2620),
--	  ISAPNP_VENDOR('T', 'A', 'G'), ISAPNP_FUNCTION(0x2620), 
--	  (unsigned long) "Teles 16.3c2" },
--	{ 0, }
--};
- 
--static struct isapnp_device_id *hdev = &hfc_ids[0];
--static struct pci_bus *pnp_c __devinitdata = NULL;
--#endif
- 
- int __devinit
- setup_hfcsx(struct IsdnCard *card)
-@@ -1482,45 +1496,6 @@
- 
- 	strcpy(tmp, hfcsx_revision);
- 	printk(KERN_INFO "HiSax: HFC-SX driver Rev. %s\n", HiSax_getrev(tmp));
--#ifdef __ISAPNP__
--	if (!card->para[1] && isapnp_present()) {
--		struct pci_bus *pb;
--		struct pci_dev *pd;
--
--		while(hdev->card_vendor) {
--			if ((pb = isapnp_find_card(hdev->card_vendor,
--				hdev->card_device, pnp_c))) {
--				pnp_c = pb;
--				pd = NULL;
--				if ((pd = isapnp_find_dev(pnp_c,
--					hdev->vendor, hdev->function, pd))) {
--					printk(KERN_INFO "HiSax: %s detected\n",
--						(char *)hdev->driver_data);
--					pd->prepare(pd);
--					pd->deactivate(pd);
--					pd->activate(pd);
--					card->para[1] = pd->resource[0].start;
--					card->para[0] = pd->irq_resource[0].start;
--					if (!card->para[0] || !card->para[1]) {
--						printk(KERN_ERR "HFC PnP:some resources are missing %ld/%lx\n",
--						card->para[0], card->para[1]);
--						pd->deactivate(pd);
--						return(0);
--					}
--					break;
--				} else {
--					printk(KERN_ERR "HFC PnP: PnP error card found, no device\n");
--				}
--			}
--			hdev++;
--			pnp_c=NULL;
--		} 
--		if (!hdev->card_vendor) {
--			printk(KERN_INFO "HFC PnP: no ISAPnP card found\n");
--			return(0);
--		}
--	}
--#endif
- 	cs->hw.hfcsx.base = card->para[1] & 0xfffe;
- 	cs->irq = card->para[0];
- 	cs->hw.hfcsx.int_s1 = 0;
-@@ -1603,3 +1578,7 @@
- 	cs->auxcmd = &hfcsx_auxcmd;
- 	return (1);
- }
-+
-+
-+
-+
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfc_sx.h linux-2.4.29/drivers/isdn/hisax/hfc_sx.h
---- linux-2.4.29.old/drivers/isdn/hisax/hfc_sx.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfc_sx.h	2005-03-22 15:06:46.365044224 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hfc_sx.h,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id$
-  *
-  * specific defines for CCD's HFC 2BDS0 S+,SP chips
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfc_usb.c linux-2.4.29/drivers/isdn/hisax/hfc_usb.c
---- linux-2.4.29.old/drivers/isdn/hisax/hfc_usb.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfc_usb.c	2005-03-22 15:06:46.381041792 +0100
-@@ -0,0 +1,1189 @@
-+/* $Id: hfc_usb.c,v 2.3 2001/07/06 21:30:11 werner Exp $
-+ *
-+ *
-+ *
-+ * Author       (C) 2001 Werner Cornelius (werner@isdn-development.de)
-+ *              modular driver for Colognechip HFC-USB chip
-+ *              as plugin for HiSax isdn driver
-+ *              type approval valid for HFC-S USB based TAs
-+ *
-+ * Copyright 2001  by Werner Cornelius (werner@isdn-development.de)
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/stddef.h>
-+#include <linux/timer.h>
-+#include <linux/config.h>
-+#include <linux/isdn_compat.h>
-+#include <linux/init.h>
-+#include "hisax.h"
-+#include <linux/module.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/tqueue.h>
-+#include <linux/usb.h>
-+#include <linux/kernel.h>
-+#include <linux/smp_lock.h>
-+#include <linux/sched.h>
-+#include "hisax_loadable.h"
-+
-+#define INCLUDE_INLINE_FUNCS
-+
-+/***********/
-+/* defines */
-+/***********/
-+#define HFC_CTRL_TIMEOUT 5	/* 5ms timeout writing/reading regs */
-+#define HFC_TIMER_T3     7000	/* timeout for l1 activation timer */
-+
-+#define HFCUSB_L1_STATECHANGE   0	/* L1 state changed */
-+#define HFCUSB_L1_DRX           1	/* D-frame received */
-+#define HFCUSB_L1_ERX           2	/* E-frame received */
-+#define HFCUSB_L1_DTX           4	/* D-frames completed */
-+
-+#define MAX_BCH_SIZE        2048	/* allowed B-channel packet size */
-+
-+#define HFCUSB_RX_THRESHOLD 64	/* threshold for fifo report bit rx */
-+#define HFCUSB_TX_THRESHOLD 64	/* threshold for fifo report bit tx */
-+
-+#define HFCUSB_CHIP_ID    0x16	/* Chip ID register index */
-+#define HFCUSB_CIRM       0x00	/* cirm register index */
-+#define HFCUSB_USB_SIZE   0x07	/* int length register */
-+#define HFCUSB_USB_SIZE_I 0x06	/* iso length register */
-+#define HFCUSB_F_CROSS    0x0b	/* bit order register */
-+#define HFCUSB_CLKDEL     0x37	/* bit delay register */
-+#define HFCUSB_CON_HDLC   0xfa	/* channel connect register */
-+#define HFCUSB_HDLC_PAR   0xfb
-+#define HFCUSB_SCTRL      0x31	/* S-bus control register (tx) */
-+#define HFCUSB_SCTRL_E    0x32	/* same for E and special funcs */
-+#define HFCUSB_SCTRL_R    0x33	/* S-bus control register (rx) */
-+#define HFCUSB_F_THRES    0x0c	/* threshold register */
-+#define HFCUSB_FIFO       0x0f	/* fifo select register */
-+#define HFCUSB_F_USAGE    0x1a	/* fifo usage register */
-+#define HFCUSB_MST_MODE0  0x14
-+#define HFCUSB_MST_MODE1  0x15
-+#define HFCUSB_P_DATA     0x1f
-+#define HFCUSB_INC_RES_F  0x0e
-+#define HFCUSB_STATES     0x30
-+
-+#define HFCUSB_CHIPID 0x40	/* ID value of HFC-USB */
-+
-+/******************/
-+/* fifo registers */
-+/******************/
-+#define HFCUSB_NUM_FIFOS   8	/* maximum number of fifos */
-+#define HFCUSB_B1_TX       0	/* index for B1 transmit bulk/int */
-+#define HFCUSB_B1_RX       1	/* index for B1 receive bulk/int */
-+#define HFCUSB_B2_TX       2
-+#define HFCUSB_B2_RX       3
-+#define HFCUSB_D_TX        4
-+#define HFCUSB_D_RX        5
-+#define HFCUSB_PCM_TX      6
-+#define HFCUSB_PCM_RX      7
-+
-+/************/
-+/* LED mask */
-+/************/
-+#define LED_DRIVER         0x1
-+#define LED_L1             0x2
-+#define LED_BCH            0x4
-+
-+/**********/
-+/* macros */
-+/**********/
-+#define Write_hfc(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_out_pipe,0,0x40,(c),(b),0,0,HFC_CTRL_TIMEOUT)
-+#define Read_hfc(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_in_pipe,1,0xC0,0,(b),(c),1,HFC_CTRL_TIMEOUT)
-+
-+#ifdef COMPAT_HAS_USB_IDTAB
-+/****************************************/
-+/* data defining the devices to be used */
-+/****************************************/
-+static __devinitdata const struct usb_device_id hfc_usb_idtab[3] = {
-+	{USB_DEVICE(0x959, 0x2bd0)},	/* Colognechip ROM */
-+	{USB_DEVICE(0x7b0, 0x0006)},	/* USB TA 128 */
-+	{}			/* end with an all-zeroes entry */
-+};
-+#endif
-+
-+/*************************************************/
-+/* entry and size of output/input control buffer */
-+/*************************************************/
-+#define HFC_CTRL_BUFSIZE 32
-+typedef struct {
-+	__u8 hfc_reg;		/* register number */
-+	__u8 reg_val;		/* value to be written (or read) */
-+} ctrl_buft;
-+
-+/***************************************************************/
-+/* structure defining input+output fifos (interrupt/bulk mode) */
-+/***************************************************************/
-+struct hfcusb_data;		/* forward definition */
-+typedef struct {
-+	int fifonum;		/* fifo index attached to this structure */
-+	__u8 fifo_mask;		/* mask for this fifo */
-+	int active;		/* fifo is currently active */
-+	struct hfcusb_data *hfc;	/* pointer to main structure */
-+	int pipe;		/* address of endpoint */
-+	__u8 usb_maxlen;	/* maximum length for usb transfer */
-+	int max_size;		/* maximum size of receive/send packet */
-+	int transmode;		/* transparent mode selected */
-+	int framenum;		/* number of frame when last tx completed */
-+	int rx_offset;		/* offset inside rx buffer */
-+	int next_complete;	/* complete marker */
-+	__u8 *act_ptr;		/* pointer to next data */
-+	__u8 intervall;		/* interrupt interval */
-+	struct sk_buff *buff;	/* actual used buffer */
-+	urb_t urb;		/* transfer structure for usb routines */
-+	__u8 buffer[128];	/* buffer incoming/outgoing data */
-+} usb_fifo;
-+
-+/*********************************************/
-+/* structure holding all data for one device */
-+/*********************************************/
-+typedef struct hfcusb_data {
-+	struct hisax_drvreg regd;	/* register data and callbacks */
-+	struct usb_device *dev;	/* our device */
-+	int if_used;		/* used interface number */
-+	int alt_used;		/* used alternate config */
-+	int ctrl_paksize;	/* control pipe packet size */
-+	int ctrl_in_pipe, ctrl_out_pipe;	/* handles for control pipe */
-+
-+	/* control pipe background handling */
-+	ctrl_buft ctrl_buff[HFC_CTRL_BUFSIZE];	/* buffer holding queued data */
-+	volatile int ctrl_in_idx, ctrl_out_idx, ctrl_cnt;	/* input/output pointer + count */
-+	urb_t ctrl_urb;		/* transfer structure for control channel */
-+	devrequest ctrl_write;	/* buffer for control write request */
-+	devrequest ctrl_read;	/* same for read request */
-+
-+	volatile __u8 dfifo_fill;	/* value read from tx d-fifo */
-+	volatile __u8 active_fifos;	/* fifos currently active as bit mask */
-+	volatile __u8 threshold_mask;	/* threshold actually reported */
-+	volatile __u8 service_request;	/* fifo needs service from task */
-+	volatile __u8 ctrl_fifo;	/* last selected fifo */
-+	volatile __u8 bch_enables;	/* or mask for sctrl_r and sctrl register values */
-+        volatile __u8 led_req;          /* request status of adapters leds */ 
-+        volatile __u8 led_act;          /* active status of adapters leds */ 
-+	usb_fifo fifos[HFCUSB_NUM_FIFOS];	/* structure holding all fifo data */
-+
-+	/* layer 1 activation/deactivation handling */
-+	volatile __u8 l1_state;	/* actual l1 state */
-+	volatile ulong l1_event;	/* event mask */
-+	struct tq_struct l1_tq;	/* l1 bh structure */
-+	struct timer_list t3_timer;	/* timer for activation/deactivation */
-+	struct timer_list t4_timer;	/* timer for activation/deactivation */
-+} hfcusb_data;
-+
-+#if 0
-+static void
-+usb_dump_urb(purb_t purb)
-+{
-+	printk("urb                   :%p\n", purb);
-+	printk("next                  :%p\n", purb->next);
-+	printk("dev                   :%p\n", purb->dev);
-+	printk("pipe                  :%08X\n", purb->pipe);
-+	printk("status                :%d\n", purb->status);
-+	printk("transfer_flags        :%08X\n", purb->transfer_flags);
-+	printk("transfer_buffer       :%p\n", purb->transfer_buffer);
-+	printk("transfer_buffer_length:%d\n",
-+	       purb->transfer_buffer_length);
-+	printk("actual_length         :%d\n", purb->actual_length);
-+	printk("setup_packet          :%p\n", purb->setup_packet);
-+	printk("start_frame           :%d\n", purb->start_frame);
-+	printk("number_of_packets     :%d\n", purb->number_of_packets);
-+	printk("interval              :%d\n", purb->interval);
-+	printk("error_count           :%d\n", purb->error_count);
-+	printk("context               :%p\n", purb->context);
-+	printk("complete              :%p\n", purb->complete);
-+}
-+#endif
-+
-+/*************************************************************************/
-+/* bottom half handler for L1 activation/deactiavtaion + D-chan + E-chan */
-+/*************************************************************************/
-+static void
-+usb_l1d_bh(hfcusb_data * hfc)
-+{
-+
-+	while (hfc->l1_event) {
-+		if (test_and_clear_bit
-+		    (HFCUSB_L1_STATECHANGE, &hfc->l1_event)) {
-+			if (hfc->l1_state == 7)
-+			    hfc->led_req |= LED_L1;
-+			else
-+			    hfc->led_req &= ~LED_L1;
-+			if ((hfc->l1_state == 7) ||
-+			    (hfc->l1_state == 3))
-+			    hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
-+					       (hfc->l1_state ==
-+						7) ? (PH_ACTIVATE |
-+						      INDICATION)
-+					       : (PH_DEACTIVATE | INDICATION),
-+					       NULL);
-+		}
-+		if (test_and_clear_bit(HFCUSB_L1_DRX, &hfc->l1_event)) {
-+			hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
-+					   PH_DATA | INDICATION,
-+					   (void *) 0);
-+		}
-+		if (test_and_clear_bit(HFCUSB_L1_ERX, &hfc->l1_event)) {
-+			hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
-+					   PH_DATA | INDICATION,
-+					   (void *) 1);
-+		}
-+		if (test_and_clear_bit(HFCUSB_L1_DTX, &hfc->l1_event)) {
-+			hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
-+					   PH_DATA | CONFIRM, NULL);
-+		}
-+	}			/* while */
-+}				/* usb_l1d_bh */
-+
-+/******************************************************/
-+/* start next background transfer for control channel */
-+/******************************************************/
-+static void
-+ctrl_start_transfer(hfcusb_data * hfc)
-+{
-+
-+	if (hfc->ctrl_cnt) {
-+		switch (hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg) {
-+			case HFCUSB_F_USAGE:
-+				hfc->ctrl_urb.pipe = hfc->ctrl_in_pipe;
-+				hfc->ctrl_urb.setup_packet =
-+				    (u_char *) & hfc->ctrl_read;
-+				hfc->ctrl_urb.transfer_buffer_length = 1;
-+				hfc->ctrl_read.index =
-+				    hfc->ctrl_buff[hfc->ctrl_out_idx].
-+				    hfc_reg;
-+				hfc->ctrl_urb.transfer_buffer =
-+				    (char *) &hfc->dfifo_fill;
-+				break;
-+
-+			default:	/* write register */
-+				hfc->ctrl_urb.pipe = hfc->ctrl_out_pipe;
-+				hfc->ctrl_urb.setup_packet =
-+				    (u_char *) & hfc->ctrl_write;
-+				hfc->ctrl_urb.transfer_buffer = NULL;
-+				hfc->ctrl_urb.transfer_buffer_length = 0;
-+				hfc->ctrl_write.index =
-+				    hfc->ctrl_buff[hfc->ctrl_out_idx].
-+				    hfc_reg;
-+				hfc->ctrl_write.value =
-+				    hfc->ctrl_buff[hfc->ctrl_out_idx].
-+				    reg_val;
-+				break;
-+		}
-+		usb_submit_urb(&hfc->ctrl_urb);	/* start transfer */
-+	}
-+}				/* ctrl_start_transfer */
-+
-+/************************************/
-+/* queue a control transfer request */
-+/* return 0 on success.             */
-+/************************************/
-+static int
-+queue_control_request(hfcusb_data * hfc, __u8 reg, __u8 val)
-+{
-+	ctrl_buft *buf;
-+
-+	if (hfc->ctrl_cnt >= HFC_CTRL_BUFSIZE)
-+		return (1);	/* no space left */
-+	buf = hfc->ctrl_buff + hfc->ctrl_in_idx;	/* pointer to new index */
-+	buf->hfc_reg = reg;
-+	buf->reg_val = val;
-+	if (++hfc->ctrl_in_idx >= HFC_CTRL_BUFSIZE)
-+		hfc->ctrl_in_idx = 0;	/* pointer wrap */
-+	if (++hfc->ctrl_cnt == 1)
-+		ctrl_start_transfer(hfc);
-+	return (0);
-+}				/* queue_control_request */
-+
-+/**************************************/
-+/* called when timer t3 or t4 expires */
-+/**************************************/
-+static void
-+l1_timer_expire(hfcusb_data * hfc)
-+{
-+    if (timer_pending(&hfc->t4_timer))
-+	del_timer(&hfc->t4_timer);
-+    queue_control_request(hfc, HFCUSB_STATES, 0x40);
-+    test_and_set_bit(HFCUSB_L1_STATECHANGE,
-+		     &hfc->l1_event);
-+    queue_task(&hfc->l1_tq, &tq_immediate);
-+    mark_bh(IMMEDIATE_BH);
-+} /* l1_timer_expire */
-+
-+/**************************************************/
-+/* (re)fills a tx-fifo urb. Queuing is done later */
-+/**************************************************/
-+static void
-+fill_tx_urb(usb_fifo * fifo)
-+{
-+	struct sk_buff *skb;
-+	long flags;
-+	int i, ii = 0;
-+
-+	fifo->urb.dev = fifo->hfc->dev;
-+	if ((fifo->buff)
-+	    && (fifo->urb.transfer_buffer_length < fifo->usb_maxlen)) {
-+		switch (fifo->fifonum) {
-+			case HFCUSB_B1_TX:
-+			case HFCUSB_B2_TX:
-+				skb = fifo->buff;
-+				fifo->buff = NULL;
-+				fifo->hfc->regd.bch_l1l2(fifo->hfc->regd.
-+							 arg_hisax,
-+							 (fifo->fifonum ==
-+							  HFCUSB_B1_TX) ? 0
-+							 : 1,
-+							 (PH_DATA |
-+							  CONFIRM),
-+							 (void *) skb);
-+				fifo->hfc->service_request |=
-+				    fifo->fifo_mask;
-+				return;
-+			case HFCUSB_D_TX:
-+				dev_kfree_skb_any(fifo->buff);
-+				fifo->buff = NULL;
-+				save_flags(flags);
-+				cli();
-+				fifo->hfc->dfifo_fill = 0xff;	/* currently invalid data */
-+				queue_control_request(fifo->hfc,
-+						      HFCUSB_FIFO,
-+						      HFCUSB_D_TX);
-+				queue_control_request(fifo->hfc,
-+						      HFCUSB_F_USAGE, 0);
-+				restore_flags(flags);
-+				return;
-+			default:
-+				return;	/* error, invalid fifo */
-+		}
-+	}
-+
-+	/* check if new buffer needed */
-+	if (!fifo->buff) {
-+		switch (fifo->fifonum) {
-+			case HFCUSB_B1_TX:
-+				if (fifo->hfc->regd.bsk[0])
-+					fifo->buff = *fifo->hfc->regd.bsk[0];	/* B1-channel tx buffer */
-+				break;
-+			case HFCUSB_B2_TX:
-+				if (fifo->hfc->regd.bsk[1])
-+					fifo->buff = *fifo->hfc->regd.bsk[1];	/* B2-channel tx buffer */
-+				break;
-+			case HFCUSB_D_TX:
-+				if (fifo->hfc->regd.dsq)
-+					fifo->buff = skb_dequeue(fifo->hfc->regd.dsq);	/* D-channel tx queue */
-+				break;
-+			default:
-+				return;	/* error, invalid fifo */
-+		}
-+		if (!fifo->buff) {
-+			fifo->active = 0;	/* we are inactive now */
-+			fifo->hfc->active_fifos &= ~fifo->fifo_mask;
-+			if (fifo->fifonum == HFCUSB_D_TX) {
-+				test_and_set_bit(HFCUSB_L1_DTX,
-+						 &fifo->hfc->l1_event);
-+				queue_task(&fifo->hfc->l1_tq,
-+					   &tq_immediate);
-+				mark_bh(IMMEDIATE_BH);
-+			}
-+			return;
-+		}
-+		fifo->act_ptr = fifo->buff->data;	/* start of data */
-+		fifo->active = 1;
-+		ii = 1;
-+		fifo->hfc->active_fifos |= fifo->fifo_mask;
-+		fifo->hfc->service_request &= ~fifo->fifo_mask;
-+	}
-+	/* fillup the send buffer */
-+	i = fifo->buff->len - (fifo->act_ptr - fifo->buff->data);	/* remaining length */
-+	fifo->buffer[0] = !fifo->transmode;	/* not eof */
-+	if (i > (fifo->usb_maxlen - ii)) {
-+		i = fifo->usb_maxlen - ii;
-+	}
-+	if (i)
-+		memcpy(fifo->buffer + ii, fifo->act_ptr, i);
-+	fifo->urb.transfer_buffer_length = i + ii;
-+        fifo->rx_offset = ii;
-+}				/* fill_tx_urb */
-+
-+/************************************************/
-+/* transmit completion routine for all tx fifos */
-+/************************************************/
-+static void
-+tx_complete(purb_t urb)
-+{
-+	usb_fifo *fifo = (usb_fifo *) urb->context;	/* pointer to our fifo */
-+
-+	fifo->hfc->service_request &= ~fifo->fifo_mask;	/* no further handling */
-+	fifo->framenum = usb_get_current_frame_number(fifo->hfc->dev);
-+
-+	/* check for deactivation or error */
-+	if ((!fifo->active) || (urb->status)) {
-+		fifo->hfc->active_fifos &= ~fifo->fifo_mask;	/* we are inactive */
-+		fifo->active = 0;
-+		if ((fifo->buff) && (fifo->fifonum == HFCUSB_D_TX)) {
-+			dev_kfree_skb_any(fifo->buff);
-+		}
-+		fifo->buff = NULL;
-+		return;
-+	}
-+	fifo->act_ptr += (urb->transfer_buffer_length - fifo->rx_offset);	/* adjust pointer */
-+	fill_tx_urb(fifo);	/* refill the urb */
-+	fifo->hfc->threshold_mask |= fifo->fifo_mask;	/* assume threshold reached */
-+	if (fifo->buff)
-+		fifo->hfc->service_request |= fifo->fifo_mask;	/* need to restart */
-+}				/* tx_complete */
-+
-+/***********************************************/
-+/* receive completion routine for all rx fifos */
-+/***********************************************/
-+static void
-+rx_complete(purb_t urb)
-+{
-+	usb_fifo *fifo = (usb_fifo *) urb->context;	/* pointer to our fifo */
-+	hfcusb_data *hfc = fifo->hfc;
-+	usb_fifo *txfifo;
-+	__u8 last_state;
-+	int i, ii, currcnt, hdlci;
-+	struct sk_buff *skb;
-+
-+	urb->dev = hfc->dev; /* security init */
-+	if ((!fifo->active) || (urb->status)) {
-+		hfc->service_request &= ~fifo->fifo_mask;	/* no further handling */
-+		hfc->active_fifos &= ~fifo->fifo_mask;	/* we are inactive */
-+		fifo->urb.interval = 0;	/* cancel automatic rescheduling */
-+		if (fifo->buff) {
-+			dev_kfree_skb_any(fifo->buff);
-+			fifo->buff = NULL;
-+		}
-+		return;
-+	}
-+
-+	/* first check for any status changes */
-+	if ((urb->actual_length < fifo->rx_offset)
-+	    || (urb->actual_length > fifo->usb_maxlen))
-+		return;		/* error condition */
-+
-+	if (fifo->rx_offset) {
-+		hfc->threshold_mask = fifo->buffer[1];	/* update threshold status */
-+		fifo->next_complete = fifo->buffer[0] & 1;
-+		if ((fifo->fifonum == HFCUSB_D_RX) &&
-+		    (hfc->led_req != hfc->led_act))
-+		    queue_control_request(hfc, HFCUSB_P_DATA, hfc->led_req);
-+
-+		/* check if rescheduling needed */
-+		if ((i =
-+		     hfc->service_request & hfc->active_fifos & ~hfc->
-+		     threshold_mask)) {
-+			currcnt =
-+			    usb_get_current_frame_number(hfc->dev);
-+			txfifo = hfc->fifos + HFCUSB_B1_TX;
-+			ii = 3;
-+			while (ii--) {
-+				if ((i & txfifo->fifo_mask)
-+				    && (currcnt != txfifo->framenum)) {
-+					hfc->service_request &=
-+					    ~txfifo->fifo_mask;
-+					if (!txfifo->buff)
-+						fill_tx_urb(txfifo);
-+					if (txfifo->buff)
-+						usb_submit_urb(&txfifo->
-+							       urb);
-+				}
-+				txfifo += 2;
-+			}
-+		}
-+
-+		/* handle l1 events */
-+		if ((fifo->buffer[0] >> 4) != hfc->l1_state) {
-+			last_state = hfc->l1_state;
-+			hfc->l1_state = fifo->buffer[0] >> 4;	/* update status */
-+			if (timer_pending(&hfc->t4_timer))
-+			    del_timer(&hfc->t4_timer);
-+			if (((hfc->l1_state == 3) && 
-+			     ((last_state == 7) || 
-+			      (last_state == 8))) || 
-+			    ((timer_pending(&hfc->t3_timer) &&
-+			    (hfc->l1_state == 8)))) {
-+			    hfc->t4_timer.expires = jiffies + 2;
-+			    add_timer(&hfc->t4_timer);
-+			} else { 
-+				if (timer_pending(&hfc->t3_timer)
-+				    && (hfc->l1_state == 7))
-+					del_timer(&hfc->t3_timer);	/* no longer needed */
-+				test_and_set_bit(HFCUSB_L1_STATECHANGE,
-+						 &hfc->l1_event);
-+				queue_task(&hfc->l1_tq, &tq_immediate);
-+				mark_bh(IMMEDIATE_BH);
-+			}
-+		}
-+	}
-+
-+	/* check the length for data and move if present */
-+	if (fifo->next_complete || (urb->actual_length > fifo->rx_offset)) {
-+		i = fifo->buff->len + urb->actual_length - fifo->rx_offset;	/* new total length */
-+		hdlci = (fifo->transmode) ? 0 : 3;
-+		if (i <= (fifo->max_size + hdlci)) {
-+			memcpy(fifo->act_ptr,
-+			       fifo->buffer + fifo->rx_offset,
-+			       urb->actual_length - fifo->rx_offset);
-+			fifo->act_ptr +=
-+			    (urb->actual_length - fifo->rx_offset);
-+			fifo->buff->len +=
-+			    (urb->actual_length - fifo->rx_offset);
-+		} else
-+			fifo->buff->len = fifo->max_size + 4;	/* mark frame as to long */
-+		if (fifo->next_complete && (urb->actual_length < fifo->usb_maxlen)) {
-+		    /* the frame is complete */
-+		    fifo->next_complete = 0;
-+		    if (((!*(fifo->act_ptr - 1)) || fifo->transmode) &&
-+			(fifo->buff->len >= (hdlci + 1))
-+			&& (fifo->buff->len <=
-+			    (fifo->max_size + hdlci)) &&
-+			((skb = dev_alloc_skb(fifo->max_size + hdlci)) != NULL)) {
-+			fifo->buff->len -= hdlci;	/* adjust size */
-+			switch (fifo->fifonum) {
-+			    case HFCUSB_D_RX:
-+				skb_queue_tail(hfc->regd.
-+					       drq,
-+					       fifo->buff);
-+				test_and_set_bit
-+				    (HFCUSB_L1_DRX,
-+				     &hfc->l1_event);
-+				queue_task(&hfc->l1_tq,
-+					   &tq_immediate);
-+				mark_bh(IMMEDIATE_BH);
-+				break;
-+
-+			    case HFCUSB_B1_RX:
-+				if (hfc->regd.brq[0]) {
-+				    skb_queue_tail
-+					(hfc->regd.
-+					 brq[0],
-+					 fifo->buff);
-+				    hfc->regd.
-+					bch_l1l2(hfc->
-+						 regd.
-+						 arg_hisax,
-+						 0,
-+						 PH_DATA
-+						 |
-+						 INDICATION,
-+						 (void *)
-+						 fifo->
-+						 buff);
-+				} else
-+				    dev_kfree_skb_any
-+					(fifo->buff);
-+				break;
-+				
-+			    case HFCUSB_B2_RX:
-+				if (hfc->regd.brq[1]) {
-+				    skb_queue_tail
-+					(hfc->regd.
-+					 brq[1],
-+					 fifo->buff);
-+				    hfc->regd.
-+					bch_l1l2(hfc->
-+						 regd.
-+						 arg_hisax,
-+						 1,
-+						 PH_DATA
-+						 |
-+						 INDICATION,
-+						 (void
-+						  *)
-+						 fifo->
-+						 buff);
-+				} else
-+				    dev_kfree_skb_any
-+					(fifo->buff);
-+				break;
-+
-+			    case HFCUSB_PCM_RX:
-+				skb_queue_tail(&hfc->regd.
-+					       erq,
-+					       fifo->buff);
-+				test_and_set_bit
-+				    (HFCUSB_L1_ERX,
-+				     &hfc->l1_event);
-+				queue_task(&hfc->l1_tq,
-+					   &tq_immediate);
-+				mark_bh(IMMEDIATE_BH);
-+				break;
-+
-+			    default:
-+				dev_kfree_skb_any(fifo->
-+						  buff);
-+				break;
-+			}
-+			fifo->buff = skb;
-+		    } 
-+		    fifo->buff->len = 0;	/* reset counter */
-+		    fifo->act_ptr = fifo->buff->data;	/* and pointer */
-+		}
-+	}
-+	fifo->rx_offset = (urb->actual_length < fifo->usb_maxlen) ? 2 : 0;
-+}				/* rx_complete */
-+
-+/***************************************************/
-+/* start the interrupt transfer for the given fifo */
-+/***************************************************/
-+static void
-+start_rx_fifo(usb_fifo * fifo)
-+{
-+	if (fifo->buff)
-+		return;		/* still active */
-+	if (!
-+	    (fifo->buff =
-+	     dev_alloc_skb(fifo->max_size + (fifo->transmode ? 0 : 3))))
-+		return;
-+	fifo->act_ptr = fifo->buff->data;
-+	FILL_INT_URB(&fifo->urb, fifo->hfc->dev, fifo->pipe, fifo->buffer,
-+		     fifo->usb_maxlen, rx_complete, fifo, fifo->intervall);
-+	fifo->next_complete = 0;
-+	fifo->rx_offset = 2;
-+	fifo->active = 1;	/* must be marked active */
-+	fifo->hfc->active_fifos |= fifo->fifo_mask;
-+	if (usb_submit_urb(&fifo->urb)) {
-+		fifo->active = 0;
-+		fifo->hfc->active_fifos &= ~fifo->fifo_mask;
-+		dev_kfree_skb_any(fifo->buff);
-+		fifo->buff = NULL;
-+	}
-+}				/* start_rx_fifo */
-+
-+/***************************************************************/
-+/* control completion routine handling background control cmds */
-+/***************************************************************/
-+static void
-+ctrl_complete(purb_t urb)
-+{
-+	hfcusb_data *hfc = (hfcusb_data *) urb->context;
-+
-+	urb->dev = hfc->dev;
-+	if (hfc->ctrl_cnt) {
-+		switch (hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg) {
-+			case HFCUSB_FIFO:
-+				hfc->ctrl_fifo =
-+				    hfc->ctrl_buff[hfc->ctrl_out_idx].
-+				    reg_val;
-+				break;
-+			case HFCUSB_F_USAGE:
-+				if (!hfc->dfifo_fill) {
-+					fill_tx_urb(hfc->fifos +
-+						    HFCUSB_D_TX);
-+					if (hfc->fifos[HFCUSB_D_TX].buff)
-+						usb_submit_urb(&hfc->
-+							       fifos
-+							       [HFCUSB_D_TX].
-+							       urb);
-+				} else {
-+					queue_control_request(hfc,
-+							      HFCUSB_FIFO,
-+							      HFCUSB_D_TX);
-+					queue_control_request(hfc,
-+							      HFCUSB_F_USAGE,
-+							      0);
-+				}
-+				break;
-+			case HFCUSB_SCTRL_R:
-+				switch (hfc->ctrl_fifo) {
-+					case HFCUSB_B1_RX:
-+						if (hfc->bch_enables & 1)
-+							start_rx_fifo(hfc->
-+								      fifos
-+								      +
-+								      HFCUSB_B1_RX);
-+						break;
-+					case HFCUSB_B2_RX:
-+						if (hfc->bch_enables & 2)
-+							start_rx_fifo(hfc->
-+								      fifos
-+								      +
-+								      HFCUSB_B2_RX);
-+						break;
-+				}
-+				if (hfc->bch_enables & 3)
-+				    hfc->led_req |= LED_BCH;
-+				else
-+				    hfc->led_req &= ~LED_BCH;
-+				break;
-+			case HFCUSB_P_DATA:
-+				hfc->led_act =
-+				    hfc->ctrl_buff[hfc->ctrl_out_idx].
-+				    reg_val;
-+				break;
-+		}
-+		hfc->ctrl_cnt--;	/* decrement actual count */
-+		if (++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE)
-+			hfc->ctrl_out_idx = 0;	/* pointer wrap */
-+		ctrl_start_transfer(hfc);	/* start next transfer */
-+	}
-+}				/* ctrl_complete */
-+
-+/*****************************************/
-+/* Layer 1 + D channel access from HiSax */
-+/*****************************************/
-+static void
-+hfcusb_l1_access(void *drvarg, int pr, void *arg)
-+{
-+	hfcusb_data *hfc = (hfcusb_data *) drvarg;
-+
-+	switch (pr) {
-+		case (PH_DATA | REQUEST):
-+		case (PH_PULL | INDICATION):
-+			skb_queue_tail(hfc->regd.dsq,
-+				       (struct sk_buff *) arg);
-+			if (!hfc->fifos[HFCUSB_D_TX].active
-+			    && !hfc->dfifo_fill) {
-+				fill_tx_urb(hfc->fifos + HFCUSB_D_TX);
-+				hfc->active_fifos |=
-+				    hfc->fifos[HFCUSB_D_TX].fifo_mask;
-+				usb_submit_urb(&hfc->fifos[HFCUSB_D_TX].
-+					       urb);
-+			}
-+			break;
-+		case (PH_ACTIVATE | REQUEST):
-+		    switch (hfc->l1_state) {
-+			case 6:
-+			case 8:
-+				hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
-+						   (PH_DEACTIVATE |
-+						   INDICATION), NULL);
-+
-+				break;
-+			case 7:
-+				hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
-+						   (PH_ACTIVATE |
-+						   INDICATION), NULL);
-+
-+				break;
-+			default:
-+				queue_control_request(hfc, HFCUSB_STATES, 0x60);	/* start activation */
-+				hfc->t3_timer.expires =
-+				    jiffies + (HFC_TIMER_T3 * HZ) / 1000;
-+				if (!timer_pending(&hfc->t3_timer))
-+					add_timer(&hfc->t3_timer);
-+				break;
-+		    }
-+		    break;
-+
-+		case (PH_DEACTIVATE | REQUEST):
-+			queue_control_request(hfc, HFCUSB_STATES, 0x40);	/* start deactivation */
-+			break;
-+		default:
-+			printk(KERN_INFO "unknown hfcusb l1_access 0x%x\n",
-+			       pr);
-+			break;
-+	}
-+}				/* hfcusb_l1_access */
-+
-+/*******************************/
-+/* B channel access from HiSax */
-+/*******************************/
-+static void
-+hfcusb_bch_access(void *drvarg, int chan, int pr, void *arg)
-+{
-+	hfcusb_data *hfc = (hfcusb_data *) drvarg;
-+	usb_fifo *fifo = hfc->fifos + (chan ? HFCUSB_B2_TX : HFCUSB_B1_TX);
-+	long flags;
-+
-+	switch (pr) {
-+		case (PH_DATA | REQUEST):
-+		case (PH_PULL | INDICATION):
-+			save_flags(flags);
-+			cli();
-+			if (!fifo->active) {
-+				fill_tx_urb(fifo);
-+				hfc->active_fifos |= fifo->fifo_mask;
-+				usb_submit_urb(&fifo->urb);
-+			}
-+			restore_flags(flags);
-+			break;
-+		case (PH_ACTIVATE | REQUEST):
-+			if (!((int) arg)) {
-+				hfc->bch_enables &= ~(1 << chan);
-+				if (fifo->active) {
-+					fifo->active = 0;
-+					usb_unlink_urb(&fifo->urb);
-+				}
-+				save_flags(flags);
-+				cli();
-+				queue_control_request(hfc, HFCUSB_FIFO,
-+						      fifo->fifonum);
-+				queue_control_request(hfc,
-+						      HFCUSB_INC_RES_F, 2);
-+				queue_control_request(hfc, HFCUSB_CON_HDLC,
-+						      9);
-+				queue_control_request(hfc, HFCUSB_SCTRL,
-+						      0x40 +
-+						      hfc->bch_enables);
-+				queue_control_request(hfc, HFCUSB_SCTRL_R,
-+						      hfc->bch_enables);
-+				restore_flags(flags);
-+				fifo++;
-+				if (fifo->active) {
-+					fifo->active = 0;
-+					usb_unlink_urb(&fifo->urb);
-+				}
-+				return;	/* fifo deactivated */
-+			}
-+			fifo->transmode = ((int) arg == L1_MODE_TRANS);
-+			fifo->max_size =
-+			    ((fifo->transmode) ? fifo->
-+			     usb_maxlen : MAX_BCH_SIZE);
-+			(fifo + 1)->transmode = fifo->transmode;
-+			(fifo + 1)->max_size = fifo->max_size;
-+			hfc->bch_enables |= (1 << chan);
-+			save_flags(flags);
-+			cli();
-+			queue_control_request(hfc, HFCUSB_FIFO,
-+					      fifo->fifonum);
-+			queue_control_request(hfc, HFCUSB_CON_HDLC,
-+					      ((!fifo->
-+						transmode) ? 9 : 11));
-+			queue_control_request(hfc, HFCUSB_INC_RES_F, 2);
-+			queue_control_request(hfc, HFCUSB_SCTRL,
-+					      0x40 + hfc->bch_enables);
-+			if ((int) arg == L1_MODE_HDLC)
-+				queue_control_request(hfc, HFCUSB_CON_HDLC,
-+						      8);
-+			queue_control_request(hfc, HFCUSB_FIFO,
-+					      fifo->fifonum + 1);
-+			queue_control_request(hfc, HFCUSB_CON_HDLC,
-+					      ((!fifo->
-+						transmode) ? 8 : 10));
-+			queue_control_request(hfc, HFCUSB_INC_RES_F, 2);
-+			queue_control_request(hfc, HFCUSB_SCTRL_R,
-+					      hfc->bch_enables);
-+			restore_flags(flags);
-+
-+			break;
-+
-+		default:
-+			printk(KERN_INFO
-+			       "unknown hfcusb bch_access chan %d 0x%x\n",
-+			       chan, pr);
-+			break;
-+	}
-+}				/* hfcusb_bch_access */
-+
-+/***************************************************************************/
-+/* usb_init is called once when a new matching device is detected to setup */
-+/* main parmeters. It registers the driver at the main hisax module.       */
-+/* on success 0 is returned.                                               */
-+/***************************************************************************/
-+static int
-+usb_init(hfcusb_data * hfc)
-+{
-+	usb_fifo *fifo;
-+	int i;
-+	u_char b;
-+
-+	/* check the chip id */
-+	if ((Read_hfc(hfc, HFCUSB_CHIP_ID, &b) != 1) ||
-+	    (b != HFCUSB_CHIPID)) {
-+		printk(KERN_INFO "HFC-USB: Invalid chip id 0x%02x\n", b);
-+		return (1);
-+	}
-+
-+	/* first set the needed config, interface and alternate */
-+	usb_set_configuration(hfc->dev, 1);
-+	usb_set_interface(hfc->dev, hfc->if_used, hfc->alt_used);
-+
-+        /* init the led state request */
-+	hfc->led_req = LED_DRIVER;
-+
-+	/* now we initialise the chip */
-+	Write_hfc(hfc, HFCUSB_CIRM, 0x10);	/* aux = output, reset off */
-+	Write_hfc(hfc, HFCUSB_P_DATA, 0);       /* leds = off */
-+	Write_hfc(hfc, HFCUSB_USB_SIZE,
-+		  (hfc->fifos[HFCUSB_B1_TX].usb_maxlen >> 3) |
-+		  ((hfc->fifos[HFCUSB_B1_RX].usb_maxlen >> 3) << 4));
-+
-+	/* enable PCM/GCI master mode */
-+	Write_hfc(hfc, HFCUSB_MST_MODE1, 0);	/* set default values */
-+	Write_hfc(hfc, HFCUSB_MST_MODE0, 1);	/* enable master mode */
-+
-+	/* init the fifos */
-+	Write_hfc(hfc, HFCUSB_F_THRES, (HFCUSB_TX_THRESHOLD >> 3) |
-+		  ((HFCUSB_RX_THRESHOLD >> 3) << 4));
-+
-+	for (i = 0, fifo = hfc->fifos + i; i < HFCUSB_NUM_FIFOS;
-+	     i++, fifo++) {
-+		Write_hfc(hfc, HFCUSB_FIFO, i);	/* select the desired fifo */
-+
-+		fifo->transmode = 0;	/* hdlc mode selected */
-+		fifo->buff = NULL;	/* init buffer pointer */
-+		fifo->max_size =
-+		    (i <= HFCUSB_B2_RX) ? MAX_BCH_SIZE : MAX_DFRAME_LEN;
-+		Write_hfc(hfc, HFCUSB_HDLC_PAR, ((i <= HFCUSB_B2_RX) ? 0 : 2));	/* data length */
-+		Write_hfc(hfc, HFCUSB_CON_HDLC, ((i & 1) ? 0x08 : 0x09));	/* rx hdlc, tx fill 1 */
-+		Write_hfc(hfc, HFCUSB_INC_RES_F, 2);	/* reset the fifo */
-+	}
-+
-+	Write_hfc(hfc, HFCUSB_CLKDEL, 0x0f);	/* clock delay value */
-+	Write_hfc(hfc, HFCUSB_STATES, 3 | 0x10);	/* set deactivated mode */
-+	Write_hfc(hfc, HFCUSB_STATES, 3);	/* enable state machine */
-+
-+	Write_hfc(hfc, HFCUSB_SCTRL_R, 0);	/* disable both B receivers */
-+	Write_hfc(hfc, HFCUSB_SCTRL, 0x40);	/* disable B transmitters + cap mode */
-+
-+	/* init the l1 timer */
-+	init_timer(&hfc->t3_timer);
-+	hfc->t3_timer.data = (long) hfc;
-+	hfc->t3_timer.function = (void *) l1_timer_expire;
-+	hfc->t4_timer.data = (long) hfc;
-+	hfc->t4_timer.function = (void *) l1_timer_expire;
-+	hfc->l1_tq.routine = (void *) (void *) usb_l1d_bh;
-+	hfc->l1_tq.sync = 0;
-+	hfc->l1_tq.data = hfc;
-+
-+	/* init the background control machinery */
-+	hfc->ctrl_read.requesttype = 0xc0;
-+	hfc->ctrl_read.request = 1;
-+	hfc->ctrl_read.length = 1;
-+	hfc->ctrl_write.requesttype = 0x40;
-+	hfc->ctrl_write.request = 0;
-+	hfc->ctrl_write.length = 0;
-+	FILL_CONTROL_URB(&hfc->ctrl_urb, hfc->dev, hfc->ctrl_out_pipe,
-+			 (u_char *) & hfc->ctrl_write, NULL, 0,
-+			 ctrl_complete, hfc);
-+
-+	/* init the TX-urbs */
-+	fifo = hfc->fifos + HFCUSB_D_TX;
-+	FILL_BULK_URB(&fifo->urb, hfc->dev, fifo->pipe,
-+		      (u_char *) fifo->buffer, 0, tx_complete, fifo);
-+	fifo = hfc->fifos + HFCUSB_B1_TX;
-+	FILL_BULK_URB(&fifo->urb, hfc->dev, fifo->pipe,
-+		      (u_char *) fifo->buffer, 0, tx_complete, fifo);
-+	fifo = hfc->fifos + HFCUSB_B2_TX;
-+	FILL_BULK_URB(&fifo->urb, hfc->dev, fifo->pipe,
-+		      (u_char *) fifo->buffer, 0, tx_complete, fifo);
-+
-+	/* init the E-buffer */
-+	skb_queue_head_init(&hfc->regd.erq);
-+
-+	/* now register ourself at hisax */
-+	hfc->regd.version = HISAX_LOAD_VERSION;	/* set our version */
-+	hfc->regd.cmd = HISAX_LOAD_REGISTER;	/* register command */
-+	hfc->regd.argl1 = (void *) hfc;	/* argument for our local routine */
-+	hfc->regd.dch_l2l1 = hfcusb_l1_access;
-+	hfc->regd.bch_l2l1 = hfcusb_bch_access;
-+	hfc->regd.drvname = "hfc_usb";
-+	if (hisax_register_hfcusb(&hfc->regd)) {
-+		printk(KERN_INFO "HFC-USB failed to register at hisax\n");
-+		Write_hfc(hfc, HFCUSB_CIRM, 0x08);	/* aux = input, reset on */
-+		return (1);
-+	}
-+
-+	/* startup the D- and E-channel fifos */
-+	start_rx_fifo(hfc->fifos + HFCUSB_D_RX);	/* D-fifo */
-+	if (hfc->fifos[HFCUSB_PCM_RX].pipe)
-+		start_rx_fifo(hfc->fifos + HFCUSB_PCM_RX);	/* E-fifo */
-+
-+	return (0);
-+}				/* usb_init */
-+
-+/*************************************************/
-+/* function called to probe a new plugged device */
-+/*************************************************/
-+static void *
-+hfc_usb_probe(struct usb_device *dev, unsigned int interface
-+#ifdef COMPAT_HAS_USB_IDTAB
-+	      , const struct usb_device_id *id_table)
-+#else
-+    )
-+#endif
-+{
-+	hfcusb_data *context;
-+	struct usb_interface *ifp = dev->actconfig->interface + interface;
-+	struct usb_interface_descriptor *ifdp =
-+	    ifp->altsetting + ifp->act_altsetting;
-+	struct usb_endpoint_descriptor *epd;
-+	int i, idx, ep_msk;
-+
-+#ifdef COMPAT_HAS_USB_IDTAB
-+	if (id_table && (dev->descriptor.idVendor == id_table->idVendor) &&
-+	    (dev->descriptor.idProduct == id_table->idProduct) &&
-+#else
-+	if ((((dev->descriptor.idVendor == 0x959) &&
-+	    (dev->descriptor.idProduct == 0x2bd0)) ||
-+	    ((dev->descriptor.idVendor == 0x7b0) &&
-+	    (dev->descriptor.idProduct == 0x0006))) &&
-+#endif
-+	    (ifdp->bNumEndpoints >= 6) && (ifdp->bNumEndpoints <= 16)) {
-+		if (!(context = kmalloc(sizeof(hfcusb_data), GFP_KERNEL))) {
-+			return (NULL);	/* got no mem */
-+		};
-+		memset(context, 0, sizeof(hfcusb_data));	/* clear the structure */
-+		i = ifdp->bNumEndpoints;	/* get number of endpoints */
-+		ep_msk = 0;	/* none found */
-+		epd = ifdp->endpoint;	/* first endpoint descriptor */
-+		while (i-- && ((ep_msk & 0xcf) != 0xcf)) {
-+
-+			idx = (((epd->bEndpointAddress & 0x7f) - 1) << 1);	/* get endpoint base */
-+			if (idx < 7) {
-+				switch (epd->bmAttributes) {
-+					case USB_ENDPOINT_XFER_INT:
-+						if (!
-+						    (epd->
-+						     bEndpointAddress &
-+						     0x80))
-+							break;	/* only interrupt in allowed */
-+						idx++;	/* input index is odd */
-+						context->fifos[idx].pipe =
-+						    usb_rcvintpipe(dev,
-+								   epd->
-+								   bEndpointAddress);
-+						break;
-+
-+					case USB_ENDPOINT_XFER_BULK:
-+						if (epd->
-+						    bEndpointAddress &
-+						    0x80)
-+							break;	/* only bulk out allowed */
-+						context->fifos[idx].pipe =
-+						    usb_sndbulkpipe(dev,
-+								    epd->
-+								    bEndpointAddress);
-+						break;
-+					default:
-+						context->fifos[idx].pipe = 0;	/* reset data */
-+				}	/* switch attribute */
-+
-+				if (context->fifos[idx].pipe) {
-+					context->fifos[idx].fifonum = idx;
-+					context->fifos[idx].fifo_mask =
-+					    1 << idx;
-+					context->fifos[idx].hfc = context;
-+					context->fifos[idx].usb_maxlen =
-+					    epd->wMaxPacketSize;
-+					context->fifos[idx].intervall =
-+					    epd->bInterval;
-+					ep_msk |= (1 << idx);
-+				} else
-+					ep_msk &= ~(1 << idx);
-+			}	/* idx < 7 */
-+			epd++;
-+		}
-+
-+		if ((ep_msk & 0x3f) != 0x3f) {
-+			kfree(context);
-+			return (NULL);
-+		}
-+		MOD_INC_USE_COUNT;	/* lock our module */
-+		context->dev = dev;	/* save device */
-+		context->if_used = interface;	/* save used interface */
-+		context->alt_used = ifp->act_altsetting;	/* and alternate config */
-+		context->ctrl_paksize = dev->descriptor.bMaxPacketSize0;	/* control size */
-+
-+		/* create the control pipes needed for register access */
-+		context->ctrl_in_pipe = usb_rcvctrlpipe(context->dev, 0);
-+		context->ctrl_out_pipe = usb_sndctrlpipe(context->dev, 0);
-+
-+		/* init the chip and register the driver */
-+		if (usb_init(context)) {
-+			kfree(context);
-+			MOD_DEC_USE_COUNT;
-+			return (NULL);
-+		}
-+
-+		printk(KERN_INFO
-+		       "HFC-USB: New device if=%d alt=%d registered\n",
-+		       context->if_used, context->alt_used);
-+		return (context);
-+	}
-+
-+	return (NULL);		/* no matching entry */
-+}				/* hfc_usb_probe */
-+
-+/****************************************************/
-+/* function called when an active device is removed */
-+/****************************************************/
-+static void
-+hfc_usb_disconnect(struct usb_device *usbdev, void *drv_context)
-+{
-+	hfcusb_data *context = drv_context;
-+	int i;
-+	struct sk_buff *skb;
-+
-+	/* tell all fifos to terminate */
-+	for (i = 0; i < HFCUSB_NUM_FIFOS; i++)
-+		if (context->fifos[i].active) {
-+			context->fifos[i].active = 0;
-+			usb_unlink_urb(&context->fifos[i].urb);
-+		}
-+	while (context->active_fifos) {
-+		set_current_state(TASK_INTERRUPTIBLE);
-+		/* Timeout 10ms */
-+		schedule_timeout((10 * HZ) / 1000);
-+	}
-+	if (timer_pending(&context->t3_timer))
-+		del_timer(&context->t3_timer);
-+	context->regd.release_driver(context->regd.arg_hisax);
-+	while ((skb = skb_dequeue(&context->regd.erq)) != NULL)
-+		dev_kfree_skb_any(skb);
-+
-+	kfree(context);		/* free our structure again */
-+	MOD_DEC_USE_COUNT;	/* and decrement the usage counter */
-+}				/* hfc_usb_disconnect */
-+
-+/************************************/
-+/* our driver information structure */
-+/************************************/
-+static struct usb_driver hfc_drv = {
-+	name:"hfc_usb",
-+#ifdef COMPAT_HAS_USB_IDTAB
-+	id_table:hfc_usb_idtab,
-+#endif
-+	probe:hfc_usb_probe,
-+	disconnect:hfc_usb_disconnect,
-+};
-+
-+static void __exit
-+hfc_usb_exit(void)
-+{
-+
-+	usb_deregister(&hfc_drv);	/* release our driver */
-+	printk(KERN_INFO "HFC-USB module removed\n");
-+}
-+
-+static int __init
-+hfc_usb_init(void)
-+{
-+	struct hisax_drvreg drv;
-+
-+	drv.version = HISAX_LOAD_VERSION;	/* set our version */
-+	drv.cmd = HISAX_LOAD_CHKVER;	/* check command only */
-+	if (hisax_register_hfcusb(&drv)) {
-+		printk(KERN_INFO "HFC-USB <-> hisax version conflict\n");
-+		return (-1);	/* unable to register */
-+	}
-+	if (usb_register(&hfc_drv)) {
-+		printk(KERN_INFO
-+		       "Unable to register HFC-USB module at usb stack\n");
-+		return (-1);	/* unable to register */
-+	}
-+
-+	printk(KERN_INFO "HFC-USB module loaded\n");
-+	return (0);
-+}
-+
-+module_init(hfc_usb_init);
-+module_exit(hfc_usb_exit);
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfc_usbr.c linux-2.4.29/drivers/isdn/hisax/hfc_usbr.c
---- linux-2.4.29.old/drivers/isdn/hisax/hfc_usbr.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfc_usbr.c	2005-03-22 15:06:46.397039360 +0100
-@@ -0,0 +1,471 @@
-+/* $Id: hfc_usbr.c,v 2.5 2001/07/06 21:30:11 werner Exp $
-+
-+ * hfc_usb.c  low level driver for CCD´s hfc-usb single chip controllers
-+ *            type approval valid for HFC-S USB based TAs
-+ *
-+ * Author     Werner Cornelius (werner@isdn-development.de)
-+ *
-+ * Copyright 2001  by Werner Cornelius (werner@isdn4linux.de)
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#define __NO_VERSION__
-+#include <linux/init.h>
-+#include "hisax.h"
-+#include "isdnl1.h"
-+#include "hisax_loadable.h"
-+
-+extern const char *CardType[];
-+
-+static const char *hfcusb_revision = "$Revision: 2.5 $";
-+
-+/*********************************/
-+/* schedule a new b_channel task */
-+/*********************************/
-+static void
-+hfcusb_sched_event(struct BCState *bcs, int event)
-+{
-+	bcs->event |= 1 << event;
-+	queue_task(&bcs->tqueue, &tq_immediate);
-+	mark_bh(IMMEDIATE_BH);
-+}
-+
-+/************************************************/
-+/* select a b-channel entry matching and active */
-+/************************************************/
-+static
-+struct BCState *
-+Sel_BCS(struct IsdnCardState *cs, int channel)
-+{
-+	if (cs->bcs[0].mode && (cs->bcs[0].channel == channel))
-+		return (&cs->bcs[0]);
-+	else if (cs->bcs[1].mode && (cs->bcs[1].channel == channel))
-+		return (&cs->bcs[1]);
-+	else
-+		return (NULL);
-+}
-+
-+/**********************************************/
-+/* transfer function (D-channel from l2 to l1 */
-+/**********************************************/
-+static void
-+hfcusb_d_l2l1(struct PStack *st, int pr, void *arg)
-+{
-+	struct IsdnCardState *cs = st->l1.hardware;
-+	struct hisax_drvreg *drv = cs->hw.hfcusb.drv;
-+
-+	if (drv) {
-+		switch (pr) {
-+			case (PH_DATA | REQUEST):
-+			case (PH_PULL | INDICATION):
-+				cs->hw.hfcusb.dch_tx_busy = 1;
-+				break;
-+			case (PH_PULL | REQUEST):
-+				if (!cs->hw.hfcusb.dch_tx_busy) {
-+					test_and_clear_bit(FLG_L1_PULL_REQ,
-+							   &st->l1.Flags);
-+					st->l1.l1l2(st, PH_PULL | CONFIRM,
-+						    NULL);
-+				} else
-+					test_and_set_bit(FLG_L1_PULL_REQ,
-+							 &st->l1.Flags);
-+				return;
-+		}
-+		drv->dch_l2l1(drv, pr, arg);
-+	} else
-+		debugl1(cs, "hfcusb l2l1 called without existing driver");
-+}				/* hfcusb_d_l2l1 */
-+
-+/*****************************/
-+/* E-channel receive routine */
-+/*****************************/
-+static void
-+EChannel_proc_rcv(struct IsdnCardState *cs)
-+{
-+	u_char *ptr;
-+	struct sk_buff *skb;
-+	struct hisax_drvreg *usbdrv =
-+	    (struct hisax_drvreg *) cs->hw.hfcusb.drv;
-+
-+
-+	while ((skb = skb_dequeue(&usbdrv->erq)) != NULL) {
-+		if (cs->debug & DEB_DLOG_HEX) {
-+			ptr = cs->dlog;
-+			if ((skb->len) < MAX_DLOG_SPACE / 3 - 10) {
-+				*ptr++ = 'E';
-+				*ptr++ = 'C';
-+				*ptr++ = 'H';
-+				*ptr++ = 'O';
-+				*ptr++ = ':';
-+				ptr += QuickHex(ptr, skb->data, skb->len);
-+				ptr--;
-+				*ptr++ = '\n';
-+				*ptr = 0;
-+				HiSax_putstatus(cs, NULL, cs->dlog);
-+			} else
-+				HiSax_putstatus(cs, "LogEcho: ",
-+						"warning Frame too big (%d)",
-+						skb->len);
-+		}
-+		dev_kfree_skb_any(skb);
-+	}
-+}
-+
-+/******************************************/
-+/* transfer function called from L1 to L2 */
-+/******************************************/
-+static void
-+hfcusb_d_l1l2(void *cs1, int pr, void *arg)
-+{
-+	struct IsdnCardState *cs = (struct IsdnCardState *) cs1;
-+
-+	switch (pr) {
-+		case (PH_DATA | INDICATION):
-+			if (!((int) arg))
-+				DChannel_proc_rcv(cs);
-+			else
-+				EChannel_proc_rcv(cs);
-+			break;
-+
-+		case (PH_DATA | CONFIRM):
-+			cs->hw.hfcusb.dch_tx_busy = 0;
-+			DChannel_proc_xmt(cs);
-+			break;
-+
-+		case (PH_ACTIVATE | INDICATION):
-+		case (PH_ACTIVATE | CONFIRM):
-+			cs->stlist->l1.l1l2(cs->stlist, pr, arg);
-+			if (cs->debug & L1_DEB_ISAC)
-+				debugl1(cs, "layer 1 activated");
-+			break;
-+
-+		case (PH_DEACTIVATE | INDICATION):
-+		case (PH_DEACTIVATE | CONFIRM):
-+			cs->stlist->l1.l1l2(cs->stlist, pr, arg);
-+			if (cs->debug & L1_DEB_ISAC)
-+				debugl1(cs, "layer 1 deactivated");
-+			break;
-+
-+		default:
-+			debugl1(cs, "unknown l1 msg 0x%x ", pr);
-+	}
-+}				/* hfcusb_d_l1l2 */
-+
-+
-+/******************************************/
-+/* transfer function called from L1 to L2 */
-+/******************************************/
-+static void
-+hfcusb_b_l1l2(void *cs1, int chan, int pr, void *arg)
-+{
-+	struct IsdnCardState *cs = (struct IsdnCardState *) cs1;
-+	struct BCState *bcs = Sel_BCS(cs, chan);
-+
-+	switch (pr) {
-+		case (PH_DATA | INDICATION):
-+			if (!bcs)
-+				return;
-+			hfcusb_sched_event(bcs, B_RCVBUFREADY);
-+			break;
-+
-+		case (PH_DATA | CONFIRM):
-+			if (!bcs)
-+				return;
-+			bcs->tx_cnt -= bcs->tx_skb->len;
-+			if (bcs->st->lli.l1writewakeup &&
-+			    (PACKET_NOACK != bcs->tx_skb->pkt_type))
-+				bcs->st->lli.l1writewakeup(bcs->st,
-+							   bcs->tx_skb->
-+							   len);
-+			dev_kfree_skb_any(bcs->tx_skb);
-+			bcs->tx_skb = skb_dequeue(&bcs->squeue);
-+			break;
-+
-+		case (PH_ACTIVATE | INDICATION):
-+		case (PH_ACTIVATE | CONFIRM):
-+			cs->stlist->l1.l1l2(cs->stlist, pr, arg);
-+			if (cs->debug & L1_DEB_ISAC)
-+				debugl1(cs, "layer 1 activated");
-+			break;
-+
-+		case (PH_DEACTIVATE | INDICATION):
-+		case (PH_DEACTIVATE | CONFIRM):
-+			cs->stlist->l1.l1l2(cs->stlist, pr, arg);
-+			if (cs->debug & L1_DEB_ISAC)
-+				debugl1(cs, "layer 1 deactivated");
-+			break;
-+
-+		default:
-+			debugl1(cs, "unknown l1 b msg 0x%x ", pr);
-+	}
-+}				/* hfcusb_b_l1l2 */
-+
-+
-+/***********************************************/
-+/* called during init setting l1 stack pointer */
-+/***********************************************/
-+void
-+setstack_hfcusb(struct PStack *st, struct IsdnCardState *cs)
-+{
-+	st->l2.l2l1 = hfcusb_d_l2l1;
-+}
-+
-+/**************************************/
-+/* send B-channel data if not blocked */
-+/**************************************/
-+static void
-+hfcusb_send_data(struct BCState *bcs)
-+{
-+	struct IsdnCardState *cs = bcs->cs;
-+	struct hisax_drvreg *drv =
-+	    (struct hisax_drvreg *) cs->hw.hfcusb.drv;
-+
-+	if (!drv)
-+		return;
-+	drv->bch_l2l1(drv->argl1, bcs->channel, PH_DATA | REQUEST,
-+		      bcs->tx_skb);
-+}
-+
-+/***************************************************************/
-+/* activate/deactivate hardware for selected channels and mode */
-+/***************************************************************/
-+void
-+mode_hfcusb(struct BCState *bcs, int mode, int bc)
-+{
-+	struct IsdnCardState *cs = bcs->cs;
-+	struct hisax_drvreg *drv = cs->hw.hfcusb.drv;
-+
-+	if (!drv)
-+		return;
-+	if (cs->debug & L1_DEB_HSCX)
-+		debugl1(cs, "HFCUSB bchannel mode %d bchan %d/%d",
-+			mode, bc, bcs->channel);
-+	bcs->mode = mode;
-+	bcs->channel = bc;
-+	if (mode) {
-+		drv->bsk[bc] = &bcs->tx_skb;
-+		drv->brq[bc] = &bcs->rqueue;
-+	}
-+	drv->bch_l2l1(drv->argl1, bc, PH_ACTIVATE | REQUEST,
-+		      (void *) mode);
-+	if (!mode) {
-+		drv->bsk[bc] = NULL;
-+		drv->brq[bc] = NULL;
-+	}
-+}
-+
-+/******************************/
-+/* Layer2 -> Layer 1 Transfer */
-+/******************************/
-+static void
-+hfcusb_b_l2l1(struct PStack *st, int pr, void *arg)
-+{
-+	struct sk_buff *skb = arg;
-+	struct hisax_drvreg *drv = st->l1.bcs->cs->hw.hfcusb.drv;
-+	long flags;
-+
-+	switch (pr) {
-+		case (PH_DATA | REQUEST):
-+			save_flags(flags);
-+			cli();
-+			if (st->l1.bcs->tx_skb) {
-+				skb_queue_tail(&st->l1.bcs->squeue, skb);
-+				restore_flags(flags);
-+			} else {
-+				st->l1.bcs->tx_skb = skb;
-+				st->l1.bcs->cs->BC_Send_Data(st->l1.bcs);
-+				restore_flags(flags);
-+			}
-+			break;
-+		case (PH_PULL | INDICATION):
-+			if (st->l1.bcs->tx_skb) {
-+				printk(KERN_WARNING
-+				       "hfc_l2l1: this shouldn't happen\n");
-+				break;
-+			}
-+			save_flags(flags);
-+			cli();
-+			st->l1.bcs->tx_skb = skb;
-+			st->l1.bcs->cs->BC_Send_Data(st->l1.bcs);
-+			restore_flags(flags);
-+			break;
-+		case (PH_PULL | REQUEST):
-+			if (!st->l1.bcs->tx_skb) {
-+				test_and_clear_bit(FLG_L1_PULL_REQ,
-+						   &st->l1.Flags);
-+				st->l1.l1l2(st, PH_PULL | CONFIRM, NULL);
-+			} else
-+				test_and_set_bit(FLG_L1_PULL_REQ,
-+						 &st->l1.Flags);
-+			break;
-+		case (PH_ACTIVATE | REQUEST):
-+			if (drv) {
-+				test_and_set_bit(BC_FLG_ACTIV,
-+						 &st->l1.bcs->Flag);
-+				mode_hfcusb(st->l1.bcs, st->l1.mode,
-+					    st->l1.bc);
-+				l1_msg_b(st, pr, arg);
-+			}
-+			break;
-+		case (PH_DEACTIVATE | REQUEST):
-+			l1_msg_b(st, pr, arg);
-+			break;
-+		case (PH_DEACTIVATE | CONFIRM):
-+			test_and_clear_bit(BC_FLG_ACTIV,
-+					   &st->l1.bcs->Flag);
-+			test_and_clear_bit(BC_FLG_BUSY, &st->l1.bcs->Flag);
-+			mode_hfcusb(st->l1.bcs, 0, st->l1.bc);
-+			st->l1.l1l2(st, PH_DEACTIVATE | CONFIRM, NULL);
-+			break;
-+	}
-+}
-+
-+/******************************************/
-+/* deactivate B-channel access and queues */
-+/******************************************/
-+static void
-+close_hfcusb(struct BCState *bcs)
-+{
-+	mode_hfcusb(bcs, 0, bcs->channel);
-+	if (test_and_clear_bit(BC_FLG_INIT, &bcs->Flag)) {
-+		skb_queue_purge(&bcs->rqueue);
-+		skb_queue_purge(&bcs->squeue);
-+		if (bcs->tx_skb) {
-+			dev_kfree_skb_any(bcs->tx_skb);
-+			bcs->tx_skb = NULL;
-+			test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
-+		}
-+	}
-+}
-+
-+/*************************************/
-+/* init B-channel queues and control */
-+/*************************************/
-+static int
-+open_hfcusbstate(struct IsdnCardState *cs, struct BCState *bcs)
-+{
-+	if (!test_and_set_bit(BC_FLG_INIT, &bcs->Flag)) {
-+		skb_queue_head_init(&bcs->rqueue);
-+		skb_queue_head_init(&bcs->squeue);
-+	}
-+	bcs->tx_skb = NULL;
-+	test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
-+	bcs->event = 0;
-+	bcs->tx_cnt = 0;
-+	return (0);
-+}
-+
-+/*********************************/
-+/* inits the stack for B-channel */
-+/*********************************/
-+static int
-+setstack_2b(struct PStack *st, struct BCState *bcs)
-+{
-+	bcs->channel = st->l1.bc;
-+	if (open_hfcusbstate(st->l1.hardware, bcs))
-+		return (-1);
-+	st->l1.bcs = bcs;
-+	st->l2.l2l1 = hfcusb_b_l2l1;
-+	setstack_manager(st);
-+	bcs->st = st;
-+	setstack_l1_B(st);
-+	return (0);
-+}
-+
-+/********************************/
-+/* called for card init message */
-+/********************************/
-+void __devinit
-+inithfcusb(struct IsdnCardState *cs)
-+{
-+	cs->setstack_d = setstack_hfcusb;
-+	cs->BC_Send_Data = &hfcusb_send_data;
-+	cs->bcs[0].BC_SetStack = setstack_2b;
-+	cs->bcs[1].BC_SetStack = setstack_2b;
-+	cs->bcs[0].BC_Close = close_hfcusb;
-+	cs->bcs[1].BC_Close = close_hfcusb;
-+	mode_hfcusb(cs->bcs, 0, 0);
-+	mode_hfcusb(cs->bcs + 1, 0, 1);
-+}
-+
-+
-+
-+/*******************************************/
-+/* handle card messages from control layer */
-+/*******************************************/
-+static int
-+hfcusb_card_msg(struct IsdnCardState *cs, int mt, void *arg)
-+{
-+	if (cs->debug & L1_DEB_ISAC)
-+		debugl1(cs, "HFCUSB: card_msg %x", mt);
-+	switch (mt) {
-+		case CARD_INIT:
-+			inithfcusb(cs);
-+			return (0);
-+		case CARD_RELEASE:
-+		case CARD_RESET:
-+		case CARD_TEST:
-+			return (0);
-+	}
-+	return (0);
-+}
-+
-+
-+extern void
-+ HiSax_closecard(int cardnr);
-+/*****************************/
-+/* release a driver instance */
-+/* called when hardware is   */
-+/* no longer present.        */
-+/*****************************/
-+static void
-+release_hfcdrv(void *arg)
-+{
-+	struct IsdnCardState *cs = (struct IsdnCardState *) arg;
-+
-+	cs->hw.hfcusb.drv = NULL;	/* disable any further use of driver */
-+	HiSax_closecard(cs->cardnr);
-+}				/* release_hfcdrv */
-+
-+/*********************************************/
-+/* called once when a new device is detected */
-+/* initialises local data                    */
-+/*********************************************/
-+int
-+setup_hfc_usb(struct IsdnCard *card)
-+{
-+	struct IsdnCardState *cs = card->cs;
-+	char tmp[64];
-+	struct hisax_drvreg *usbdrv =
-+	    (struct hisax_drvreg *) cs->hw.hfcusb.drv;
-+
-+	if (!usbdrv)
-+		return (0);	/* no driver data present */
-+
-+	strcpy(tmp, hfcusb_revision);
-+	printk(KERN_INFO "HiSax: HFC-USB driver Rev. %s\n",
-+	       HiSax_getrev(tmp));
-+
-+	usbdrv->release_driver = &release_hfcdrv;	/* release routine */
-+	usbdrv->arg_hisax = (void *) cs;	/* parameter for calling */
-+	usbdrv->dch_l1l2 = &hfcusb_d_l1l2;	/* access from L1 to HiSax */
-+	usbdrv->bch_l1l2 = &hfcusb_b_l1l2;
-+	usbdrv->drq = &cs->rq;
-+	usbdrv->dsq = &cs->sq;
-+	cs->cardmsg = &hfcusb_card_msg;
-+	return (1);		/* success */
-+}
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfcscard.c linux-2.4.29/drivers/isdn/hisax/hfcscard.c
---- linux-2.4.29.old/drivers/isdn/hisax/hfcscard.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfcscard.c	2005-03-22 15:06:46.412037080 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hfcscard.c,v 1.1.4.1 2001/11/20 14:19:35 kai Exp $
-+/* $Id: hfcscard.c,v 1.10 2001/09/24 13:22:56 kai Exp $
-  *
-  * low level stuff for hfcs based cards (Teles3c, ACER P10)
-  *
-@@ -12,14 +12,13 @@
- 
- #define __NO_VERSION__
- #include <linux/init.h>
--#include <linux/isapnp.h>
- #include "hisax.h"
- #include "hfc_2bds0.h"
- #include "isdnl1.h"
- 
- extern const char *CardType[];
- 
--static const char *hfcs_revision = "$Revision: 1.1.4.1 $";
-+static const char *hfcs_revision = "$Revision: 1.10 $";
- 
- static void
- hfcs_interrupt(int intno, void *dev_id, struct pt_regs *regs)
-@@ -140,36 +139,6 @@
- 	return(0);
- }
- 
--#ifdef __ISAPNP__
--static struct isapnp_device_id hfc_ids[] __initdata = {
--	{ ISAPNP_VENDOR('A', 'N', 'X'), ISAPNP_FUNCTION(0x1114),
--	  ISAPNP_VENDOR('A', 'N', 'X'), ISAPNP_FUNCTION(0x1114), 
--	  (unsigned long) "Acer P10" },
--	{ ISAPNP_VENDOR('B', 'I', 'L'), ISAPNP_FUNCTION(0x0002),
--	  ISAPNP_VENDOR('B', 'I', 'L'), ISAPNP_FUNCTION(0x0002), 
--	  (unsigned long) "Billion 2" },
--	{ ISAPNP_VENDOR('B', 'I', 'L'), ISAPNP_FUNCTION(0x0001),
--	  ISAPNP_VENDOR('B', 'I', 'L'), ISAPNP_FUNCTION(0x0001), 
--	  (unsigned long) "Billion 1" },
--	{ ISAPNP_VENDOR('T', 'A', 'G'), ISAPNP_FUNCTION(0x7410),
--	  ISAPNP_VENDOR('T', 'A', 'G'), ISAPNP_FUNCTION(0x7410), 
--	  (unsigned long) "IStar PnP" },
--	{ ISAPNP_VENDOR('T', 'A', 'G'), ISAPNP_FUNCTION(0x2610),
--	  ISAPNP_VENDOR('T', 'A', 'G'), ISAPNP_FUNCTION(0x2610), 
--	  (unsigned long) "Teles 16.3c" },
--	{ ISAPNP_VENDOR('S', 'F', 'M'), ISAPNP_FUNCTION(0x0001),
--	  ISAPNP_VENDOR('S', 'F', 'M'), ISAPNP_FUNCTION(0x0001), 
--	  (unsigned long) "Tornado Tipa C" },
--	{ ISAPNP_VENDOR('K', 'Y', 'E'), ISAPNP_FUNCTION(0x0001),
--	  ISAPNP_VENDOR('K', 'Y', 'E'), ISAPNP_FUNCTION(0x0001), 
--	  (unsigned long) "Genius Speed Surfer" },
--	{ 0, }
--};
--
--static struct isapnp_device_id *hdev = &hfc_ids[0];
--static struct pci_bus *pnp_c __devinitdata = NULL;
--#endif
--
- int __init
- setup_hfcs(struct IsdnCard *card)
- {
-@@ -178,46 +147,6 @@
- 
- 	strcpy(tmp, hfcs_revision);
- 	printk(KERN_INFO "HiSax: HFC-S driver Rev. %s\n", HiSax_getrev(tmp));
--
--#ifdef __ISAPNP__
--	if (!card->para[1] && isapnp_present()) {
--		struct pci_bus *pb;
--		struct pci_dev *pd;
--
--		while(hdev->card_vendor) {
--			if ((pb = isapnp_find_card(hdev->card_vendor,
--				hdev->card_device, pnp_c))) {
--				pnp_c = pb;
--				pd = NULL;
--				if ((pd = isapnp_find_dev(pnp_c,
--					hdev->vendor, hdev->function, pd))) {
--					printk(KERN_INFO "HiSax: %s detected\n",
--						(char *)hdev->driver_data);
--					pd->prepare(pd);
--					pd->deactivate(pd);
--					pd->activate(pd);
--					card->para[1] = pd->resource[0].start;
--					card->para[0] = pd->irq_resource[0].start;
--					if (!card->para[0] || !card->para[1]) {
--						printk(KERN_ERR "HFC PnP:some resources are missing %ld/%lx\n",
--						card->para[0], card->para[1]);
--						pd->deactivate(pd);
--						return(0);
--					}
--					break;
--				} else {
--					printk(KERN_ERR "HFC PnP: PnP error card found, no device\n");
--				}
--			}
--			hdev++;
--			pnp_c=NULL;
--		} 
--		if (!hdev->card_vendor) {
--			printk(KERN_INFO "HFC PnP: no ISAPnP card found\n");
--			return(0);
--		}
--	}
--#endif
- 	cs->hw.hfcD.addr = card->para[1] & 0xfffe;
- 	cs->irq = card->para[0];
- 	cs->hw.hfcD.cip = 0;
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hisax.h linux-2.4.29/drivers/isdn/hisax/hisax.h
---- linux-2.4.29.old/drivers/isdn/hisax/hisax.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hisax.h	2005-03-22 15:06:46.431034192 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hisax.h,v 1.1.4.2 2001/12/09 19:15:28 kai Exp $
-+/* $Id: hisax.h,v 2.64 2001/09/24 13:22:56 kai Exp $
-  *
-  * Basic declarations, defines and prototypes
-  *
-@@ -24,7 +24,9 @@
- #include <linux/isdnif.h>
- #include <linux/tty.h>
- #include <linux/serial_reg.h>
-+#ifndef COMPAT_NO_SOFTNET
- #include <linux/netdevice.h>
-+#endif
- 
- #define ERROR_STATISTIC
- 
-@@ -68,9 +70,6 @@
- #define DL_DATA		0x0220
- #define DL_FLUSH	0x0224
- #define DL_UNIT_DATA	0x0230
--
--#define MDL_BC_RELEASE  0x0278  // Formula-n enter:now
--#define MDL_BC_ASSIGN   0x027C  // Formula-n enter:now
- #define MDL_ASSIGN	0x0280
- #define MDL_REMOVE	0x0284
- #define MDL_ERROR	0x0288
-@@ -472,8 +471,6 @@
- #define BC_FLG_FTI_RUN	13
- #define BC_FLG_LL_OK	14
- #define BC_FLG_LL_CONN	15
--#define BC_FLG_FTI_FTS	16
--#define BC_FLG_FRH_WAIT	17
- 
- #define L1_MODE_NULL	0
- #define L1_MODE_TRANS	1
-@@ -695,6 +692,13 @@
- 	struct timer_list timer;
- };
- 
-+#ifdef CONFIG_HISAX_HFC_USB
-+struct hfcUSB_hw {  
-+        void *drv; /* pointer to driver structure */
-+        int dch_tx_busy;
-+};
-+#endif
-+
- struct hfcSX_hw {
-         unsigned long base;
- 	unsigned char cirm;
-@@ -838,17 +842,6 @@
- 	int ph_state;
- };
- 
--struct amd7930_chip {
--	u_char lmr1;
--	u_char ph_state;
--	u_char old_state;
--	u_char flg_t3;
--	unsigned int tx_xmtlen;
--	struct timer_list timer3;
--	void (*ph_command) (struct IsdnCardState *, u_char, char *);
--	void (*setIrqMask) (struct IsdnCardState *, u_char);
--};
--
- struct icc_chip {
- 	int ph_state;
- 	u_char *mon_tx;
-@@ -902,6 +895,9 @@
- 		struct njet_hw njet;
- 		struct hfcD_hw hfcD;
- 		struct hfcPCI_hw hfcpci;
-+#ifdef CONFIG_HISAX_HFC_USB
-+	        struct hfcUSB_hw hfcusb;
-+#endif
- 		struct hfcSX_hw hfcsx;
- 		struct ix1_hw niccy;
- 		struct isurf_hw isurf;
-@@ -945,7 +941,6 @@
- 		struct hfcpci_chip hfcpci;
- 		struct hfcsx_chip hfcsx;
- 		struct w6692_chip w6692;
--		struct amd7930_chip amd7930;
- 		struct icc_chip icc;
- 	} dc;
- 	u_char *rcvbuf;
-@@ -967,6 +962,8 @@
- #define  MON0_TX	4
- #define  MON1_TX	8
- 
-+#define	 HISAX_MAX_CARDS	8
-+
- #define  ISDN_CTYPE_16_0	1
- #define  ISDN_CTYPE_8_0		2
- #define  ISDN_CTYPE_16_3	3
-@@ -1006,8 +1003,8 @@
- #define  ISDN_CTYPE_HFC_SX      37
- #define  ISDN_CTYPE_NETJET_U	38
- #define  ISDN_CTYPE_HFC_SP_PCMCIA      39
--#define  ISDN_CTYPE_DYNAMIC     40
--#define  ISDN_CTYPE_ENTERNOW	41
-+#define  ISDN_CTYPE_HFC_USB     40
-+#define  ISDN_CTYPE_DYNAMIC     41
- #define  ISDN_CTYPE_COUNT	41
- 
- 
-@@ -1267,10 +1264,6 @@
- #define CARD_NETJET_U 0
- #endif
- 
--#ifdef CONFIG_HISAX_ENTERNOW_PCI
--#define CARD_FN_ENTERNOW_PCI 1
--#endif
--
- #define TEI_PER_CARD 1
- 
- /* L1 Debug */
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hisax_debug.h linux-2.4.29/drivers/isdn/hisax/hisax_debug.h
---- linux-2.4.29.old/drivers/isdn/hisax/hisax_debug.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hisax_debug.h	2005-03-22 15:06:46.452031000 +0100
-@@ -28,7 +28,7 @@
- 
- #define DBG(level, format, arg...) do { \
- if (level & __debug_variable) \
--printk(KERN_DEBUG "%s: " format "\n" , __FUNCTION__ , ## arg); \
-+printk(KERN_DEBUG __FUNCTION__ ": " format "\n" , ## arg); \
- } while (0)
- 
- #define DBG_PACKET(level,data,count) \
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hisax_fcpcipnp.c linux-2.4.29/drivers/isdn/hisax/hisax_fcpcipnp.c
---- linux-2.4.29.old/drivers/isdn/hisax/hisax_fcpcipnp.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hisax_fcpcipnp.c	2005-03-22 15:06:46.468028568 +0100
-@@ -20,22 +20,19 @@
-  *
-  * o POWER PC
-  * o clean up debugging
-- * o tx_skb at PH_DEACTIVATE time
-  */
- 
- #include <linux/version.h>
- #include <linux/module.h>
- #include <linux/init.h>
- #include <linux/pci.h>
--#include <linux/isapnp.h>
-+#include "hisax_isapnp.h"
- #include <linux/kmod.h>
- #include <linux/slab.h>
- #include <linux/skbuff.h>
- #include <linux/netdevice.h>
--
--#include <asm/io.h>
--
- #include "hisax_fcpcipnp.h"
-+#include "hisax_isac.h"
- 
- // debugging cruft
- #define __debug_variable debug
-@@ -46,10 +43,14 @@
- MODULE_PARM(debug, "i");
- #endif
- 
--MODULE_AUTHOR("Kai Germaschewski <kai.germaschewski@gmx.de>/Karsten Keil <kkeil@suse.de>");
-+MODULE_AUTHOR("Kai Germaschewski <kai.germaschewski@gmx.de>");
- MODULE_DESCRIPTION("AVM Fritz!PCI/PnP ISDN driver");
- 
--static struct pci_device_id fcpci_ids[] __devinitdata = {
-+#ifndef PCI_DEVICE_ID_AVM_A1_V2
-+#define PCI_DEVICE_ID_AVM_A1_V2 0x0e00
-+#endif
-+
-+static struct pci_device_id fcpci_ids[] __initdata = {
- 	{ PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_A1   , PCI_ANY_ID, PCI_ANY_ID,
- 	  0, 0, (unsigned long) "Fritz!Card PCI" },
- 	{ PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_A1_V2, PCI_ANY_ID, PCI_ANY_ID,
-@@ -58,7 +59,7 @@
- };
- MODULE_DEVICE_TABLE(pci, fcpci_ids);
- 
--static struct isapnp_device_id fcpnp_ids[] __devinitdata = {
-+static struct isapnp_device_id fcpnp_ids[] __initdata = {
- 	{ ISAPNP_VENDOR('A', 'V', 'M'), ISAPNP_FUNCTION(0x0900),
- 	  ISAPNP_VENDOR('A', 'V', 'M'), ISAPNP_FUNCTION(0x0900), 
- 	  (unsigned long) "Fritz!Card PnP" },
-@@ -68,7 +69,8 @@
- 
- static int protocol = 2;       /* EURO-ISDN Default */
- MODULE_PARM(protocol, "i");
--MODULE_LICENSE("GPL");
-+
-+static LIST_HEAD(adapter_list);
- 
- // ----------------------------------------------------------------------
- 
-@@ -147,7 +149,7 @@
- 	outb(idx, adapter->io + AVM_INDEX);
- 	val = inb(adapter->io + AVM_DATA + (offset & 0xf));
-  	spin_unlock_irqrestore(&adapter->hw_lock, flags);
--	DBG(0x1000, " port %#x, value %#x",
-+	DBG(0x1000, __FUNCTION__ " port %#x, value %#x",
- 	    offset, val);
- 	return val;
- }
-@@ -160,7 +162,7 @@
- 		AVM_IDX_ISAC_REG_HIGH : AVM_IDX_ISAC_REG_LOW;
- 	unsigned long flags;
- 
--	DBG(0x1000, " port %#x, value %#x",
-+	DBG(0x1000, __FUNCTION__ " port %#x, value %#x",
- 	    offset, value);
- 	spin_lock_irqsave(&adapter->hw_lock, flags);
- 	outb(idx, adapter->io + AVM_INDEX);
-@@ -240,7 +242,7 @@
- 	outl(offset, adapter->io + AVM_ISACSX_INDEX);
- 	val = inl(adapter->io + AVM_ISACSX_DATA);
-  	spin_unlock_irqrestore(&adapter->hw_lock, flags);
--	DBG(0x1000, " port %#x, value %#x",
-+	DBG(0x1000, __FUNCTION__ " port %#x, value %#x",
- 	    offset, val);
- 
- 	return val;
-@@ -252,7 +254,7 @@
- 	struct fritz_adapter *adapter = isac->priv;
- 	unsigned long flags;
- 
--	DBG(0x1000, " port %#x, value %#x",
-+	DBG(0x1000, __FUNCTION__ " port %#x, value %#x",
- 	    offset, value);
- 	spin_lock_irqsave(&adapter->hw_lock, flags);
- 	outl(offset, adapter->io + AVM_ISACSX_INDEX);
-@@ -375,6 +377,9 @@
- 
- 	DBG(0x40, "hdlc_fill_fifo");
- 
-+	if (!skb)
-+		BUG();
-+
- 	if (skb->len == 0)
- 		BUG();
- 
-@@ -515,7 +520,6 @@
- 	}
- 	skb_push(bcs->tx_skb, bcs->tx_cnt);
- 	bcs->tx_cnt = 0;
--	hdlc_fill_fifo(bcs);
- }
- 
- static inline void hdlc_xpr_irq(struct fritz_bcs *bcs)
-@@ -536,7 +540,7 @@
- 	dev_kfree_skb_irq(skb);
- }
- 
--static void hdlc_irq_one(struct fritz_bcs *bcs, u32 stat)
-+static void hdlc_irq(struct fritz_bcs *bcs, u32 stat)
- {
- 	DBG(0x10, "ch%d stat %#x", bcs->channel, stat);
- 	if (stat & HDLC_INT_RPR) {
-@@ -553,7 +557,7 @@
- 	}
- }
- 
--static inline void hdlc_irq(struct fritz_adapter *adapter)
-+static inline void hdlc_interrupt(struct fritz_adapter *adapter)
- {
- 	int nr;
- 	u32 stat;
-@@ -562,7 +566,7 @@
- 		stat = adapter->read_hdlc_status(adapter, nr);
- 		DBG(0x10, "HDLC %c stat %#x", 'A' + nr, stat);
- 		if (stat & HDLC_INT_MASK)
--			hdlc_irq_one(&adapter->bcs[nr], stat);
-+			hdlc_irq(&adapter->bcs[nr], stat);
- 	}
- }
- 
-@@ -584,14 +588,14 @@
- 		adapter->write_ctrl(bcs, 5);
- 		break;
- 	case L1_MODE_TRANS:
-+		bcs->ctrl.sr.mode = HDLC_MODE_TRANS;
-+		adapter->write_ctrl(bcs, 5);
-+		bcs->ctrl.sr.cmd = HDLC_CMD_XRS;
-+		adapter->write_ctrl(bcs, 1);
-+		bcs->ctrl.sr.cmd = 0;
-+		break;
- 	case L1_MODE_HDLC:
--		bcs->rcvidx = 0;
--		bcs->tx_cnt = 0;
--		bcs->tx_skb = NULL;
--		if (mode == L1_MODE_TRANS)
--			bcs->ctrl.sr.mode = HDLC_MODE_TRANS;
--		else
--			bcs->ctrl.sr.mode = HDLC_MODE_ITF_FLG;
-+		bcs->ctrl.sr.mode = HDLC_MODE_ITF_FLG;
- 		adapter->write_ctrl(bcs, 5);
- 		bcs->ctrl.sr.cmd = HDLC_CMD_XRS;
- 		adapter->write_ctrl(bcs, 1);
-@@ -645,10 +649,10 @@
- 		return;
- 	DBG(2, "STATUS0 %#x", val);
- 	if (val & AVM_STATUS0_IRQ_ISAC)
--		isacsx_irq(&adapter->isac);
-+		isacsx_interrupt(&adapter->isac);
- 
- 	if (val & AVM_STATUS0_IRQ_HDLC)
--		hdlc_irq(adapter);
-+		hdlc_interrupt(adapter);
- }
- 
- static void fcpci_irq(int intno, void *dev, struct pt_regs *regs)
-@@ -662,10 +666,10 @@
- 		return;
- 	DBG(2, "sval %#x", sval);
- 	if (!(sval & AVM_STATUS0_IRQ_ISAC))
--		isac_irq(&adapter->isac);
-+		isac_interrupt(&adapter->isac);
- 
- 	if (!(sval & AVM_STATUS0_IRQ_HDLC))
--		hdlc_irq(adapter);
-+		hdlc_interrupt(adapter);
- }
- 
- // ----------------------------------------------------------------------
-@@ -681,11 +685,6 @@
- {
- 	outb(AVM_STATUS0_DIS_TIMER | AVM_STATUS0_RES_TIMER | 
- 	     AVM_STATUS0_ENA_IRQ, adapter->io + AVM_STATUS0);
--
--	outb(AVM_STATUS1_ENA_IOM | adapter->irq, 
--	     adapter->io + AVM_STATUS1);
--	set_current_state(TASK_UNINTERRUPTIBLE);
--	schedule_timeout(50*HZ / 1000); /* Timeout 50ms */
- }
- 
- // ----------------------------------------------------------------------
-@@ -693,6 +692,7 @@
- static int __devinit fcpcipnp_setup(struct fritz_adapter *adapter)
- {
- 	u32 val = 0;
-+	struct pci_dev *pdev = adapter->pci_dev;
- 	int retval;
- 
- 	DBG(1,"");
-@@ -700,21 +700,21 @@
- 	isac_init(&adapter->isac); // FIXME is this okay now
- 
- 	retval = -EBUSY;
--	if (!request_region(adapter->io, 32, "fcpcipnp"))
-+	if (!request_region(adapter->io, 32, "hisax_fcpcipnp"))
- 		goto err;
- 
- 	switch (adapter->type) {
- 	case AVM_FRITZ_PCIV2:
--		retval = request_irq(adapter->irq, fcpci2_irq, SA_SHIRQ, 
--				     "fcpcipnp", adapter);
-+		retval = request_irq(pdev->irq, fcpci2_irq, SA_SHIRQ, 
-+				     "hisax_fcpcipnp", adapter);
- 		break;
- 	case AVM_FRITZ_PCI:
--		retval = request_irq(adapter->irq, fcpci_irq, SA_SHIRQ,
--				     "fcpcipnp", adapter);
-+		retval = request_irq(pdev->irq, fcpci_irq, SA_SHIRQ,
-+				     "hisax_fcpcipnp", adapter);
- 		break;
- 	case AVM_FRITZ_PNP:
--		retval = request_irq(adapter->irq, fcpci_irq, 0,
--				     "fcpcipnp", adapter);
-+		retval = request_irq(pdev->irq, fcpci_irq, 0,
-+				     "hisax_fcpcipnp", adapter);
- 		break;
- 	}
- 	if (retval)
-@@ -808,11 +808,23 @@
- 
- static void __devexit fcpcipnp_release(struct fritz_adapter *adapter)
- {
-+	struct pci_dev *pdev = adapter->pci_dev;
-+
- 	DBG(1,"");
- 
- 	outb(0, adapter->io + AVM_STATUS0);
--	free_irq(adapter->irq, adapter);
-+	free_irq(pdev->irq, adapter);
- 	release_region(adapter->io, 32);
-+
-+	switch (adapter->type) {
-+	case AVM_FRITZ_PCI:
-+	case AVM_FRITZ_PCIV2:
-+		pci_disable_device(pdev);
-+		break;
-+	case AVM_FRITZ_PNP:
-+		pdev->deactivate(pdev);
-+		break;
-+	}
- }
- 
- // ----------------------------------------------------------------------
-@@ -830,6 +842,8 @@
- 
- 	memset(adapter, 0, sizeof(struct fritz_adapter));
- 
-+	adapter->pci_dev = pdev;
-+
- 	SET_MODULE_OWNER(&adapter->isac.hisax_d_if);
- 	adapter->isac.hisax_d_if.ifc.priv = &adapter->isac;
- 	adapter->isac.hisax_d_if.ifc.l2l1 = isac_d_l2l1;
-@@ -840,6 +854,7 @@
- 		adapter->bcs[i].b_if.ifc.priv = &adapter->bcs[i];
- 		adapter->bcs[i].b_if.ifc.l2l1 = fritz_b_l2l1;
- 	}
-+	list_add(&adapter->list, &adapter_list);
- 
- 	pci_set_drvdata(pdev, adapter);
- 
-@@ -854,6 +869,7 @@
- static void delete_adapter(struct fritz_adapter *adapter)
- {
- 	hisax_unregister(&adapter->isac.hisax_d_if);
-+	list_del(&adapter->list);
- 	kfree(adapter);
- }
- 
-@@ -863,12 +879,15 @@
- 	struct fritz_adapter *adapter;
- 	int retval;
- 
-+	printk(KERN_INFO "hisax_fcpcipnp: found adapter %s at %s\n",
-+	       (char *) ent->driver_data, pdev->slot_name);
-+
- 	retval = -ENOMEM;
- 	adapter = new_adapter(pdev);
- 	if (!adapter)
- 		goto err;
- 
--	if (pdev->device == PCI_DEVICE_ID_AVM_A1_V2) 
-+	if (pdev->device == 0x0e00) 
- 		adapter->type = AVM_FRITZ_PCIV2;
- 	else
- 		adapter->type = AVM_FRITZ_PCI;
-@@ -876,12 +895,7 @@
- 	retval = pci_enable_device(pdev);
- 	if (retval)
- 		goto err_free;
--
- 	adapter->io = pci_resource_start(pdev, 1);
--	adapter->irq = pdev->irq;
--
--	printk(KERN_INFO "hisax_fcpcipnp: found adapter %s at %s\n",
--	       (char *) ent->driver_data, pdev->slot_name);
- 
- 	retval = fcpcipnp_setup(adapter);
- 	if (retval)
-@@ -901,6 +915,9 @@
- 	struct fritz_adapter *adapter;
- 	int retval;
- 
-+	printk(KERN_INFO "hisax_fcpcipnp: found adapter %s\n",
-+	       (char *) ent->driver_data);
-+
- 	retval = -ENOMEM;
- 	adapter = new_adapter(pdev);
- 	if (!adapter)
-@@ -912,11 +929,8 @@
- 	pdev->deactivate(pdev); // why?
- 	pdev->activate(pdev);
- 	adapter->io = pdev->resource[0].start;
--	adapter->irq = pdev->irq_resource[0].start;
--
--	printk(KERN_INFO "hisax_fcpcipnp: found adapter %s at IO %#x irq %d\n",
--	       (char *) ent->driver_data, adapter->io, adapter->irq);
--
-+	pdev->irq = pdev->irq_resource[0].start;
-+	
- 	retval = fcpcipnp_setup(adapter);
- 	if (retval)
- 		goto err_free;
-@@ -929,43 +943,35 @@
- 	return retval;
- }
- 
--static void __devexit fcpci_remove(struct pci_dev *pdev)
--{
--	struct fritz_adapter *adapter = pci_get_drvdata(pdev);
--
--	fcpcipnp_release(adapter);
--	pci_disable_device(pdev);
--	delete_adapter(adapter);
--}
--
--static void __devexit fcpnp_remove(struct pci_dev *pdev)
-+static void __devexit fcpcipnp_remove(struct pci_dev *pdev)
- {
- 	struct fritz_adapter *adapter = pci_get_drvdata(pdev);
- 
- 	fcpcipnp_release(adapter);
--	pdev->deactivate(pdev);
- 	delete_adapter(adapter);
- }
- 
- static struct pci_driver fcpci_driver = {
--	name:     "fcpci",
--	probe:    fcpci_probe,
--	remove:   __devexit_p(fcpci_remove),
-+	name: "fcpci",
-+	probe: fcpci_probe,
-+	remove: fcpcipnp_remove,
- 	id_table: fcpci_ids,
- };
- 
- static struct isapnp_driver fcpnp_driver = {
--	name:     "fcpnp",
--	probe:    fcpnp_probe,
--	remove:   __devexit_p(fcpnp_remove),
-+	name: "fcpnp",
-+	probe: fcpnp_probe,
-+	remove: fcpcipnp_remove,
- 	id_table: fcpnp_ids,
- };
- 
--static int __init hisax_fcpcipnp_init(void)
-+static LIST_HEAD(isapnp_drivers);
-+
-+static int __init hisax_fcpci_init(void)
- {
- 	int retval, pci_nr_found;
- 
--	printk(KERN_INFO "hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1\n");
-+	printk(KERN_INFO "hisax_fcpcipnp: Fritz!PCI/PnP ISDN driver v0.0.1\n");
- 
- 	retval = pci_register_driver(&fcpci_driver);
- 	if (retval < 0)
-@@ -976,15 +982,14 @@
- 	if (retval < 0)
- 		goto out_unregister_pci;
- 
--#if !defined(CONFIG_HOTPLUG) || defined(MODULE)
-+#if !defined(CONFIG_HOTPLUG) && defined(MODULE)
- 	if (pci_nr_found + retval == 0) {
- 		retval = -ENODEV;
- 		goto out_unregister_isapnp;
--	}
- #endif
- 	return 0;
- 
--#if !defined(CONFIG_HOTPLUG) || defined(MODULE)
-+#if !defined(CONFIG_HOTPLUG) && defined(MODULE)
-  out_unregister_isapnp:
- 	isapnp_unregister_driver(&fcpnp_driver);
- #endif
-@@ -994,11 +999,15 @@
- 	return retval;
- }
- 
--static void __exit hisax_fcpcipnp_exit(void)
-+static void __exit hisax_fcpci_exit(void)
- {
- 	isapnp_unregister_driver(&fcpnp_driver);
- 	pci_unregister_driver(&fcpci_driver);
- }
- 
--module_init(hisax_fcpcipnp_init);
--module_exit(hisax_fcpcipnp_exit);
-+module_init(hisax_fcpci_init);
-+module_exit(hisax_fcpci_exit);
-+
-+#ifdef __ISAPNP__
-+#include "hisax_isapnp.c"
-+#endif
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hisax_fcpcipnp.h linux-2.4.29/drivers/isdn/hisax/hisax_fcpcipnp.h
---- linux-2.4.29.old/drivers/isdn/hisax/hisax_fcpcipnp.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hisax_fcpcipnp.h	2005-03-22 15:06:46.484026136 +0100
-@@ -43,10 +43,12 @@
- };
- 
- struct fritz_adapter {
-+	struct list_head list;
-+	struct pci_dev *pci_dev;
-+
- 	int type;
- 	spinlock_t hw_lock;
- 	unsigned int io;
--	unsigned int irq;
- 	struct isac isac;
- 
- 	struct fritz_bcs bcs[2];
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hisax_isac.c linux-2.4.29/drivers/isdn/hisax/hisax_isac.c
---- linux-2.4.29.old/drivers/isdn/hisax/hisax_isac.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hisax_isac.c	2005-03-22 15:06:46.543017168 +0100
-@@ -34,7 +34,7 @@
- static int debug = 1;
- MODULE_PARM(debug, "i");
- 
--static char *ISACVer[] = {
-+static char *ISACVer[] __devinitdata = {
-   "2086/2186 V1.1", 
-   "2085 B1", 
-   "2085 B2",
-@@ -42,10 +42,6 @@
- };
- #endif
- 
--MODULE_AUTHOR("Kai Germaschewski <kai.germaschewski@gmx.de>/Karsten Keil <kkeil@suse.de>");
--MODULE_DESCRIPTION("ISAC/ISAC-SX driver");
--MODULE_LICENSE("GPL");
--
- #define DBG_WARN      0x0001
- #define DBG_IRQ       0x0002
- #define DBG_L1M       0x0004
-@@ -438,7 +434,7 @@
- 	va_end(args);
- }
- 
--static void isac_version(struct isac *cs)
-+static void __devinit isac_version(struct isac *cs)
- {
- 	int val;
- 
-@@ -602,7 +598,7 @@
- 	}
- }
- 
--void isac_irq(struct isac *isac)
-+void isac_interrupt(struct isac *isac)
- {
- 	unsigned char val;
- 
-@@ -635,8 +631,6 @@
- 	if (val & ISAC_ISTA_SIN) {
- 		DBG(DBG_WARN, "SIN");
- 	}
--	isac->write_isac(isac, ISAC_MASK, 0xff);
--	isac->write_isac(isac, ISAC_MASK, 0x00);
- }
- 
- // ======================================================================
-@@ -742,7 +736,7 @@
- 	}
- }
- 
--void isacsx_irq(struct isac *isac)
-+void isacsx_interrupt(struct isac *isac)
- {
- 	unsigned char val;
- 
-@@ -755,7 +749,7 @@
- 		isacsx_cic_interrupt(isac);
- }
- 
--void isac_init(struct isac *isac)
-+void __devinit isac_init(struct isac *isac)
- {
- 	isac->tx_skb = NULL;
- 	isac->l1m.fsm = &l1fsm;
-@@ -770,7 +764,7 @@
- 	FsmInitTimer(&isac->l1m, &isac->timer);
- }
- 
--void isac_setup(struct isac *isac)
-+void __devinit isac_setup(struct isac *isac)
- {
- 	int val, eval;
- 
-@@ -781,7 +775,7 @@
- 
-   	isac->write_isac(isac, ISAC_MASK, 0xff);
-   	isac->mocr = 0xaa;
--	if (test_bit(ISAC_IOM1, &isac->flags)) {
-+	if (test_bit(HW_IOM1, &isac->flags)) {
- 		/* IOM 1 Mode */
- 		isac->write_isac(isac, ISAC_ADF2, 0x0);
- 		isac->write_isac(isac, ISAC_SPCR, 0xa);
-@@ -817,7 +811,7 @@
- 	FsmEvent(&isac->l1m, (val >> 2) & 0xf, NULL);
- 
- 	isac->write_isac(isac, ISAC_MASK, 0x0);
--	// RESET Receiver and Transmitter
-+	/* RESET Receiver and Transmitter */
- 	isac->write_isac(isac, ISAC_CMDR, ISAC_CMDR_XRES | ISAC_CMDR_RRES);
- }
- 
-@@ -888,10 +882,10 @@
- EXPORT_SYMBOL(isac_d_l2l1);
- 
- EXPORT_SYMBOL(isacsx_setup);
--EXPORT_SYMBOL(isacsx_irq);
-+EXPORT_SYMBOL(isacsx_interrupt);
- 
- EXPORT_SYMBOL(isac_setup);
--EXPORT_SYMBOL(isac_irq);
-+EXPORT_SYMBOL(isac_interrupt);
- 
- module_init(hisax_isac_init);
- module_exit(hisax_isac_exit);
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hisax_isac.h linux-2.4.29/drivers/isdn/hisax/hisax_isac.h
---- linux-2.4.29.old/drivers/isdn/hisax/hisax_isac.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hisax_isac.h	2005-03-22 15:06:46.559014736 +0100
-@@ -8,7 +8,7 @@
- #define TIMER3_VALUE 7000
- #define MAX_DFRAME_LEN_L1 300
- 
--#define ISAC_IOM1	0
-+#define HW_IOM1	0
- 
- struct isac {
- 	void *priv;
-@@ -37,9 +37,9 @@
- void isac_d_l2l1(struct hisax_if *hisax_d_if, int pr, void *arg);
- 
- void isac_setup(struct isac *isac);
--void isac_irq(struct isac *isac);
-+void isac_interrupt(struct isac *isac);
- 
- void isacsx_setup(struct isac *isac);
--void isacsx_irq(struct isac *isac);
-+void isacsx_interrupt(struct isac *isac);
- 
- #endif
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hisax_isapnp.c linux-2.4.29/drivers/isdn/hisax/hisax_isapnp.c
---- linux-2.4.29.old/drivers/isdn/hisax/hisax_isapnp.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hisax_isapnp.c	2005-03-22 15:06:46.576012152 +0100
-@@ -0,0 +1,105 @@
-+// FIXME copied
-+static const struct isapnp_device_id *
-+isapnp_match_device(const struct isapnp_device_id *ids, struct pci_dev *dev)
-+{
-+	DBG(1,"");
-+
-+	while (ids->card_vendor || ids->card_device) {
-+		if ((ids->card_vendor == ISAPNP_ANY_ID || ids->card_vendor == dev->bus->vendor) &&
-+		    (ids->card_device == ISAPNP_ANY_ID || ids->card_device == dev->bus->device) &&
-+                    (ids->vendor == ISAPNP_ANY_ID || ids->vendor == dev->vendor) &&
-+                    (ids->function == ISAPNP_ANY_ID || ids->function == dev->device))
-+			return ids;
-+		ids++;
-+	}
-+	return NULL;
-+}
-+
-+/**
-+ * pci_dev_driver - get the pci_driver of a device
-+ * @dev: the device to query
-+ *
-+ * Returns the appropriate pci_driver structure or %NULL if there is no 
-+ * registered driver for the device.
-+ */
-+struct pci_driver *isapnp_dev_driver(const struct pci_dev *dev)
-+{
-+	return dev->driver;
-+}
-+
-+static int isapnp_announce_device(struct isapnp_driver *drv, struct pci_dev *dev)
-+{
-+	const struct isapnp_device_id *id;
-+	int ret = 0;
-+
-+	DBG(1,"");
-+
-+	if (drv->id_table) {
-+		id = isapnp_match_device(drv->id_table, dev);
-+		if (!id) {
-+			ret = 0;
-+			goto out;
-+		}
-+	} else
-+		id = NULL;
-+
-+//	dev_probe_lock();
-+	if (drv->probe(dev, id) >= 0) {
-+		dev->driver = (struct pci_driver *) drv;
-+		ret = 1;
-+	}
-+//	dev_probe_unlock();
-+out:
-+	return ret;
-+}
-+
-+/**
-+ * FIXME pci_register_driver - register a new pci driver
-+ * @drv: the driver structure to register
-+ * 
-+ * Adds the driver structure to the list of registered drivers
-+ * Returns the number of pci devices which were claimed by the driver
-+ * during registration.  The driver remains registered even if the
-+ * return value is zero.
-+ */
-+int isapnp_register_driver(struct isapnp_driver *drv)
-+{
-+	struct pci_dev *dev;
-+	int count = 0;
-+
-+	DBG(1,"");
-+
-+	list_add_tail(&drv->node, &isapnp_drivers);
-+	isapnp_for_each_dev(dev) {
-+		if (!isapnp_dev_driver(dev))
-+			count += isapnp_announce_device(drv, dev);
-+	}
-+	return count;
-+}
-+
-+/**
-+ * pci_unregister_driver - unregister a pci driver
-+ * @drv: the driver structure to unregister
-+ * 
-+ * Deletes the driver structure from the list of registered PCI drivers,
-+ * gives it a chance to clean up by calling its remove() function for
-+ * each device it was responsible for, and marks those devices as
-+ * driverless.
-+ */
-+
-+void isapnp_unregister_driver(struct isapnp_driver *drv)
-+{
-+	struct pci_dev *dev;
-+
-+	DBG(1,"");
-+
-+	list_del(&drv->node);
-+	isapnp_for_each_dev(dev) {
-+		if (dev->driver == (struct pci_driver *) drv) {
-+			if (drv->remove)
-+				drv->remove(dev);
-+			dev->driver = NULL;
-+		}
-+	}
-+}
-+
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hisax_isapnp.h linux-2.4.29/drivers/isdn/hisax/hisax_isapnp.h
---- linux-2.4.29.old/drivers/isdn/hisax/hisax_isapnp.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hisax_isapnp.h	2005-03-22 15:06:46.590010024 +0100
-@@ -0,0 +1,33 @@
-+#ifndef __HISAX_ISAPNP_H__
-+#define __HISAX_ISAPNP_H__
-+
-+#include <linux/isapnp.h>
-+
-+#ifdef COMPAT_NEED_ISAPNP_DRIVER
-+struct isapnp_driver {
-+	struct list_head node;
-+	char *name;
-+	const struct isapnp_device_id *id_table;	/* NULL if wants all devices */
-+	int  (*probe)  (struct pci_dev *dev, const struct isapnp_device_id *id);	/* New device inserted */
-+	void (*remove) (struct pci_dev *dev);	/* Device removed (NULL if not a hot-plug capable driver) */
-+};
-+#endif
-+#ifdef __ISAPNP__
-+
-+int isapnp_register_driver(struct isapnp_driver *drv);
-+void isapnp_unregister_driver(struct isapnp_driver *drv);
-+
-+#else
-+
-+static inline int isapnp_register_driver(struct isapnp_driver *drv) 
-+{ 
-+	return 0;
-+}
-+
-+static inline void isapnp_unregister_driver(struct isapnp_driver *drv) 
-+{ 
-+}
-+
-+#endif
-+
-+#endif
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hisax_loadable.h linux-2.4.29/drivers/isdn/hisax/hisax_loadable.h
---- linux-2.4.29.old/drivers/isdn/hisax/hisax_loadable.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hisax_loadable.h	2005-03-22 15:06:46.606007592 +0100
-@@ -0,0 +1,74 @@
-+/* $Id: hisax_loadable.h,v 2.1 2001/06/08 22:19:16 werner Exp $
-+ *
-+ *
-+ * Author       (C) 2001 Werner Cornelius (werner@isdn-development.de)
-+ *              modular driver for Colognechip HFC-USB chip
-+ *              as plugin for HiSax isdn driver
-+ *
-+ * Copyright 2001  by Werner Cornelius (werner@isdn4linux.de)
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/skbuff.h>
-+
-+/***************************************/
-+/* additional defines for l1 constants */
-+/***************************************/
-+#define B1_DATA       0x1f0
-+#define B1_SETMODE    0x1f4
-+#define B2_DATA       0x1f8
-+#define B2_SETMODE    0x1fc
-+
-+
-+/********************************************************/
-+/* structure used for register and release of L1 driver */
-+/********************************************************/
-+struct hisax_drvreg {
-+	int version;		/* actual version for check */
-+	int cmd;		/* command code */
-+
-+	/* function pointers set by hisax during register call */
-+	void (*release_driver) (void *arg_hisax);	/* set by hisax, release function for driver */
-+	void (*dch_l1l2) (void *arg_hisax, int pr, void *arg);	/* set by hisax, notify dch+l1 events */
-+	void (*bch_l1l2) (void *arg_hisax, int chan, int pr, void *arg);	/* set by hisax, notify bch events */
-+	void *arg_hisax;	/* argument when calling hisax main */
-+	struct sk_buff_head *drq;	/* pointer to D-receive queue */
-+	struct sk_buff_head *dsq;	/* pointer to D-send queue */
-+	struct sk_buff_head erq;	/* E-receive queue */
-+	struct sk_buff_head *brq[2];	/* pointer to B-receive queues */
-+	struct sk_buff **bsk[2];	/* pointer to B-transmit buffer */
-+
-+	/* function pointers set by l1 driver before calling the register function */
-+	void (*dch_l2l1) (void *argl1, int pr, void *arg);	/* function dch+l1 from hisax -> l1 */
-+	void (*bch_l2l1) (void *argl1, int chan, int pr, void *arg);	/* function bch from hisax -> l1 */
-+	void *argl1;		/* pointer to l1 data structure when calling l1 */
-+
-+	char *drvname;		/* driver name for hisax usage */
-+};
-+
-+/**************************/
-+/* constants and commands */
-+/**************************/
-+#define HISAX_LOAD_VERSION  4	/* change when interface changes */
-+#define HISAX_LOAD_CHKVER   0	/* check version command (returns 0 on success) */
-+#define HISAX_LOAD_REGISTER 1	/* register the L1 driver and return 0 on success */
-+
-+/***************************************/
-+/* definition of the register function */
-+/***************************************/
-+extern int hisax_register_hfcusb(struct hisax_drvreg *l1drv);
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hscx.c linux-2.4.29/drivers/isdn/hisax/hscx.c
---- linux-2.4.29.old/drivers/isdn/hisax/hscx.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hscx.c	2005-03-22 15:06:46.621005312 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hscx.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: hscx.c,v 1.24 2001/09/24 13:22:56 kai Exp $
-  *
-  * HSCX specific routines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hscx.h linux-2.4.29/drivers/isdn/hisax/hscx.h
---- linux-2.4.29.old/drivers/isdn/hisax/hscx.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hscx.h	2005-03-22 15:06:46.640002424 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hscx.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: hscx.h,v 1.8 2001/09/24 13:22:56 kai Exp $
-  *
-  * HSCX specific defines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hscx_irq.c linux-2.4.29/drivers/isdn/hisax/hscx_irq.c
---- linux-2.4.29.old/drivers/isdn/hisax/hscx_irq.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hscx_irq.c	2005-03-22 15:06:46.655999992 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hscx_irq.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: hscx_irq.c,v 1.18 2001/09/24 13:22:56 kai Exp $
-  *
-  * low level b-channel stuff for Siemens HSCX
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/icc.c linux-2.4.29/drivers/isdn/hisax/icc.c
---- linux-2.4.29.old/drivers/isdn/hisax/icc.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/icc.c	2005-03-22 15:06:46.672997408 +0100
-@@ -1,4 +1,4 @@
--/* $Id: icc.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: icc.c,v 1.8 2001/09/24 13:22:56 kai Exp $
-  *
-  * ICC specific routines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/icc.h linux-2.4.29/drivers/isdn/hisax/icc.h
---- linux-2.4.29.old/drivers/isdn/hisax/icc.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/icc.h	2005-03-22 15:06:46.687995128 +0100
-@@ -1,4 +1,4 @@
--/* $Id: icc.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: icc.h,v 1.4 2001/09/24 13:22:56 kai Exp $
-  *
-  * ICC specific routines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/ipac.h linux-2.4.29/drivers/isdn/hisax/ipac.h
---- linux-2.4.29.old/drivers/isdn/hisax/ipac.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/ipac.h	2005-03-22 15:06:46.702992848 +0100
-@@ -1,4 +1,4 @@
--/* $Id: ipac.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: ipac.h,v 1.7 2001/09/24 13:22:56 kai Exp $
-  *
-  * IPAC specific defines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/isac.c linux-2.4.29/drivers/isdn/hisax/isac.c
---- linux-2.4.29.old/drivers/isdn/hisax/isac.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/isac.c	2005-03-22 15:06:46.844971264 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isac.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: isac.c,v 1.31 2001/09/24 13:22:56 kai Exp $
-  *
-  * ISAC specific routines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/isac.h linux-2.4.29/drivers/isdn/hisax/isac.h
---- linux-2.4.29.old/drivers/isdn/hisax/isac.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/isac.h	2005-03-22 15:06:47.111930680 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isac.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: isac.h,v 1.9 2001/09/24 13:22:56 kai Exp $
-  *
-  * ISAC specific defines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/isar.c linux-2.4.29/drivers/isdn/hisax/isar.c
---- linux-2.4.29.old/drivers/isdn/hisax/isar.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/isar.c	2005-03-22 15:06:47.302901648 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isar.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: isar.c,v 1.22 2001/09/23 12:00:05 keil Exp $
-  *
-  * isar.c   ISAR (Siemens PSB 7110) specific routines
-  *
-@@ -21,12 +21,10 @@
- #define DLE	0x10
- #define ETX	0x03
- 
--#define FAXMODCNT	13
--const	u_char	faxmodulation[] = {3,24,48,72,73,74,96,97,98,121,122,145,146};
--static	u_int	modmask = 0x1fff;
--static	int	frm_extra_delay = 2;
--static	int	para_TOA = 6;
--const   u_char  *FC1_CMD[] = {"FAE", "FTS", "FRS", "FTM", "FRM", "FTH", "FRH", "CTRL" };
-+
-+const u_char faxmodulation_s[] = "3,24,48,72,73,74,96,97,98,121,122,145,146"; 
-+const u_char faxmodulation[] = {3,24,48,72,73,74,96,97,98,121,122,145,146}; 
-+#define FAXMODCNT 13
- 
- void isar_setup(struct IsdnCardState *cs);
- static void isar_pump_cmd(struct BCState *bcs, u_char cmd, u_char para);
-@@ -127,7 +125,7 @@
- 	ireg->clsb = cs->BC_Read_Reg(cs, 1, ISAR_CTRL_L);
- #if DUMP_MBOXFRAME
- 	if (cs->debug & L1_DEB_HSCX)
--		debugl1(cs, "irq_stat(%02x,%02x,%d)", ireg->iis, ireg->cmsb,
-+		debugl1(cs, "rcv_mbox(%02x,%02x,%d)", ireg->iis, ireg->cmsb,
- 			ireg->clsb);
- #endif
- }
-@@ -414,7 +412,6 @@
- 	}
- 	cs->debug = debug;
- 	isar_setup(cs);
--
- 	ret = 0;
- reterrflg:
- 	restore_flags(flags);
-@@ -428,21 +425,6 @@
- 	return(ret);
- }
- 
--static inline void
--ll_deliver_faxstat(struct BCState *bcs, u_char status)
--{
--        isdn_ctrl ic;
--	struct Channel *chanp = (struct Channel *) bcs->st->lli.userdata;
-- 
--	if (bcs->cs->debug & L1_DEB_HSCX)
--		debugl1(bcs->cs, "HL->LL FAXIND %x", status);
--	ic.driver = bcs->cs->myid;
--	ic.command = ISDN_STAT_FAXIND;
--	ic.arg = chanp->chan;
--	ic.parm.aux.cmd = status;
--	bcs->cs->iif.statcallb(&ic);
--}
--
- extern void BChannel_bh(struct BCState *);
- #define B_LL_NOCARRIER	8
- #define B_LL_CONNECT	9
-@@ -599,6 +581,7 @@
- 				if (ireg->cmsb & SART_NMD) { /* ABORT */
- 					if (cs->debug & L1_DEB_WARN)
- 						debugl1(cs, "isar_rcv_frame: no more data");
-+					cs->BC_Write_Reg(cs, 1, ISAR_IIA, 0);
- 					bcs->hw.isar.rcvidx = 0;
- 					send_DLE_ETX(bcs);
- 					sendmsg(cs, SET_DPS(bcs->hw.isar.dpath) |
-@@ -609,6 +592,7 @@
- 				}
- 			} else {
- 				printk(KERN_WARNING "HiSax: skb out of memory\n");
-+				cs->BC_Write_Reg(cs, 1, ISAR_IIA, 0);
- 			}
- 			break;
- 		}
-@@ -633,9 +617,8 @@
- 			bcs->hw.isar.rcvidx = 0;
- 			cs->BC_Write_Reg(cs, 1, ISAR_IIA, 0);
- 		} else {
--			if (ireg->cmsb & HDLC_FSD) {
-+			if (ireg->cmsb & HDLC_FSD)
- 				bcs->hw.isar.rcvidx = 0;
--			}
- 			ptr = bcs->hw.isar.rcvbuf + bcs->hw.isar.rcvidx;
- 			bcs->hw.isar.rcvidx += ireg->clsb;
- 			rcv_mbox(cs, ireg, ptr);
-@@ -646,8 +629,6 @@
- 					if (cs->debug & L1_DEB_WARN)
- 						debugl1(cs, "isar frame to short %d",
- 							bcs->hw.isar.rcvidx);
--					printk(KERN_WARNING "ISAR: frame to short %d\n",
--						bcs->hw.isar.rcvidx);
- 				} else if (!(skb = dev_alloc_skb(bcs->hw.isar.rcvidx))) {
- 					printk(KERN_WARNING "ISAR: receive out of memory\n");
- 				} else {
-@@ -658,7 +639,6 @@
- 					isar_sched_event(bcs, B_RCVBUFREADY);
- 					send_DLE_ETX(bcs);
- 					isar_sched_event(bcs, B_LL_OK);
--					test_and_clear_bit(BC_FLG_FRH_WAIT, &bcs->Flag);
- 				}
- 				bcs->hw.isar.rcvidx = 0;
- 			}
-@@ -666,14 +646,13 @@
- 		if (ireg->cmsb & SART_NMD) { /* ABORT */
- 			if (cs->debug & L1_DEB_WARN)
- 				debugl1(cs, "isar_rcv_frame: no more data");
-+			cs->BC_Write_Reg(cs, 1, ISAR_IIA, 0);
- 			bcs->hw.isar.rcvidx = 0;
-+			send_DLE_ETX(bcs);
- 			sendmsg(cs, SET_DPS(bcs->hw.isar.dpath) |
- 				ISAR_HIS_PUMPCTRL, PCTRL_CMD_ESC, 0, NULL);
- 			bcs->hw.isar.state = STFAX_ESCAPE;
--			if (test_and_clear_bit(BC_FLG_FRH_WAIT, &bcs->Flag)) {
--				send_DLE_ETX(bcs);
--				isar_sched_event(bcs, B_LL_NOCARRIER);
--			}
-+			isar_sched_event(bcs, B_LL_NOCARRIER);
- 		}
- 		break;
- 	default:
-@@ -977,6 +956,21 @@
- 	}
- }
- 
-+static inline void
-+ll_deliver_faxstat(struct BCState *bcs, u_char status)
-+{
-+        isdn_ctrl ic;
-+	struct Channel *chanp = (struct Channel *) bcs->st->lli.userdata;
-+ 
-+	if (bcs->cs->debug & L1_DEB_HSCX)
-+		debugl1(bcs->cs, "HL->LL FAXIND %x", status);
-+	ic.driver = bcs->cs->myid;
-+	ic.command = ISDN_STAT_FAXIND;
-+	ic.arg = chanp->chan;
-+	ic.parm.aux.cmd = status;
-+	bcs->cs->iif.statcallb(&ic);
-+}
-+
- static void
- isar_pump_statev_fax(struct BCState *bcs, u_char devt) {
- 	struct IsdnCardState *cs = bcs->cs;
-@@ -1081,22 +1075,19 @@
- 			if (cs->debug & L1_DEB_HSCX)
- 				debugl1(cs, "pump stev RSP_DISC");
- 			if (bcs->hw.isar.state == STFAX_ESCAPE) {
--				p1 = 5;
- 				switch(bcs->hw.isar.newcmd) {
- 					case 0:
- 						bcs->hw.isar.state = STFAX_READY;
- 						break;
--					case PCTRL_CMD_FTM:
--						p1 = 2;
- 					case PCTRL_CMD_FTH:
-+					case PCTRL_CMD_FTM:
-+						p1 = 10;
- 						sendmsg(cs, dps | ISAR_HIS_PUMPCTRL,
- 							PCTRL_CMD_SILON, 1, &p1);
- 						bcs->hw.isar.state = STFAX_SILDET;
- 						break;
--					case PCTRL_CMD_FRM:
--						if (frm_extra_delay)
--							mdelay(frm_extra_delay);
- 					case PCTRL_CMD_FRH:
-+					case PCTRL_CMD_FRM:
- 						p1 = bcs->hw.isar.mod = bcs->hw.isar.newmod;
- 						bcs->hw.isar.newmod = 0;
- 						bcs->hw.isar.cmd = bcs->hw.isar.newcmd;
-@@ -1215,9 +1206,6 @@
- 					isar_pump_statev_modem(bcs, ireg->cmsb);
- 				} else if (bcs->mode == L1_MODE_FAX) {
- 					isar_pump_statev_fax(bcs, ireg->cmsb);
--				} else if (ireg->cmsb == PSEV_10MS_TIMER) {
--					if (cs->debug & L1_DEB_HSCX)
--						debugl1(cs, "pump stev TIMER");
- 				} else {
- 					if (cs->debug & L1_DEB_WARN)
- 						debugl1(cs, "isar IIS_PSTEV pmode %d stat %x",
-@@ -1278,9 +1266,6 @@
- 	if (test_and_clear_bit(BC_FLG_LL_CONN, &bcs->Flag)) {
- 		isar_sched_event(bcs, B_LL_CONNECT);
- 	}
--	if (test_and_clear_bit(BC_FLG_FTI_FTS, &bcs->Flag)) {
--		isar_sched_event(bcs, B_LL_OK);
--	}
- }
- 
- static void
-@@ -1303,7 +1288,7 @@
- 			} else {
- 				param[5] = PV32P6_ATN;
- 			}
--			param[0] = para_TOA; /* 6 db */
-+			param[0] = 6; /* 6 db */
- 			param[1] = PV32P2_V23R | PV32P2_V22A | PV32P2_V22B |
- 				   PV32P2_V22C | PV32P2_V21 | PV32P2_BEL; 
- 			param[2] = PV32P3_AMOD | PV32P3_V32B | PV32P3_V23B;
-@@ -1319,7 +1304,7 @@
- 			} else {
- 				param[1] = PFAXP2_ATN;
- 			}
--			param[0] = para_TOA; /* 6 db */
-+			param[0] = 6; /* 6 db */
- 			sendmsg(cs, dps | ISAR_HIS_PUMPCFG, ctrl, 2, param);
- 			bcs->hw.isar.state = STFAX_NULL;
- 			bcs->hw.isar.newcmd = 0;
-@@ -1348,6 +1333,7 @@
- 				"\0\0");
- 			break;
- 		case L1_MODE_HDLC:
-+		case L1_MODE_FAX:
- 			param[0] = 0;
- 			sendmsg(cs, dps | ISAR_HIS_SARTCFG, SMODE_HDLC, 1,
- 				param);
-@@ -1359,9 +1345,6 @@
- 			sendmsg(cs, dps | ISAR_HIS_SARTCFG, ctrl, 2,
- 				param);
- 			break;
--		case L1_MODE_FAX:
--			/* SART must not configured with FAX */
--			break;
- 	}
- 	udelay(1000);
- 	sendmsg(cs, dps | ISAR_HIS_BSTREQ, 0, 0, NULL);
-@@ -1465,7 +1448,6 @@
- 
- 	switch(cmd) {
- 		case ISDN_FAX_CLASS1_FTM:
--			test_and_clear_bit(BC_FLG_FRH_WAIT, &bcs->Flag);
- 			if (bcs->hw.isar.state == STFAX_READY) {
- 				p1 = para;
- 				ctrl = PCTRL_CMD_FTM;
-@@ -1489,7 +1471,6 @@
- 			}
- 			break;
- 		case ISDN_FAX_CLASS1_FTH:
--			test_and_clear_bit(BC_FLG_FRH_WAIT, &bcs->Flag);
- 			if (bcs->hw.isar.state == STFAX_READY) {
- 				p1 = para;
- 				ctrl = PCTRL_CMD_FTH;
-@@ -1513,7 +1494,6 @@
- 			}
- 			break;
- 		case ISDN_FAX_CLASS1_FRM:
--			test_and_clear_bit(BC_FLG_FRH_WAIT, &bcs->Flag);
- 			if (bcs->hw.isar.state == STFAX_READY) {
- 				p1 = para;
- 				ctrl = PCTRL_CMD_FRM;
-@@ -1537,7 +1517,6 @@
- 			}
- 			break;
- 		case ISDN_FAX_CLASS1_FRH:
--			test_and_set_bit(BC_FLG_FRH_WAIT, &bcs->Flag);
- 			if (bcs->hw.isar.state == STFAX_READY) {
- 				p1 = para;
- 				ctrl = PCTRL_CMD_FRH;
-@@ -1560,11 +1539,6 @@
- 				bcs->hw.isar.state = STFAX_ESCAPE; 
- 			}
- 			break;
--		case ISDN_FAXPUMP_HALT:
--			bcs->hw.isar.state = STFAX_NULL;
--			nom = 0;
--			ctrl = PCTRL_CMD_HALT;
--			break;
- 	}
- 	if (ctrl)
- 		sendmsg(cs, dps | ISAR_HIS_PUMPCTRL, ctrl, nom, &p1);
-@@ -1658,15 +1632,6 @@
- 			l1_msg_b(st, pr, arg);
- 			break;
- 		case (PH_DEACTIVATE | CONFIRM):
--			switch(st->l1.mode) {
--				case L1_MODE_TRANS:
--				case L1_MODE_HDLC:
--				case L1_MODE_V32:
--					break;
--				case L1_MODE_FAX:
--					isar_pump_cmd(st->l1.bcs, ISDN_FAXPUMP_HALT, 0);
--					break;
--			}
- 			test_and_clear_bit(BC_FLG_ACTIV, &st->l1.bcs->Flag);
- 			test_and_clear_bit(BC_FLG_BUSY, &st->l1.bcs->Flag);
- 			if (st->l1.bcs->cs->debug & L1_DEB_HSCX)
-@@ -1758,51 +1723,6 @@
- 						test_and_set_bit(BC_FLG_DLEETX,
- 							&bcs->Flag);
- 					break;
--				case ISDN_FAX_CLASS1_FTS:
--					if (ic->parm.aux.subcmd == AT_QUERY) {
--						ic->command = ISDN_STAT_FAXIND;
--						ic->parm.aux.cmd = ISDN_FAX_CLASS1_OK;
--						cs->iif.statcallb(ic);
--						return(0);
--					} else if (ic->parm.aux.subcmd == AT_EQ_QUERY) {
--						strcpy(ic->parm.aux.para, "0-255");
--						ic->command = ISDN_STAT_FAXIND;
--						ic->parm.aux.cmd = ISDN_FAX_CLASS1_QUERY;
--						cs->iif.statcallb(ic);
--						return(0);
--					} else if (ic->parm.aux.subcmd == AT_EQ_VALUE) {
--						if (cs->debug & L1_DEB_HSCX)
--							debugl1(cs, "isar_auxcmd %s=%d",
--								FC1_CMD[ic->parm.aux.cmd], ic->parm.aux.para[0]);
--						if (bcs->hw.isar.state == STFAX_READY) {
--							if (! ic->parm.aux.para[0]) {
--								ic->command = ISDN_STAT_FAXIND;
--								ic->parm.aux.cmd = ISDN_FAX_CLASS1_OK;
--								cs->iif.statcallb(ic);
--								return(0);
--							}
--							if (! test_and_set_bit(BC_FLG_FTI_RUN, &bcs->Flag)) {
--								/* n*10 ms */
--								bcs->hw.isar.ftimer.expires =
--									jiffies + ((ic->parm.aux.para[0] * 10 * HZ)/1000);
--								test_and_set_bit(BC_FLG_FTI_FTS, &bcs->Flag);
--								add_timer(&bcs->hw.isar.ftimer);
--								return(0);
--							} else {
--								if (cs->debug)
--									debugl1(cs, "isar FTS=%d and FTI busy",
--										ic->parm.aux.para[0]);
--							}
--						} else {
--							if (cs->debug)
--								debugl1(cs, "isar FTS=%d and isar.state not ready(%x)",
--									ic->parm.aux.para[0],bcs->hw.isar.state);
--						}
--						ic->command = ISDN_STAT_FAXIND;
--						ic->parm.aux.cmd = ISDN_FAX_CLASS1_ERROR;
--						cs->iif.statcallb(ic);
--					}
--					break;
- 				case ISDN_FAX_CLASS1_FRM:
- 				case ISDN_FAX_CLASS1_FRH:
- 				case ISDN_FAX_CLASS1_FTM:
-@@ -1815,24 +1735,16 @@
- 						cs->iif.statcallb(ic);
- 						return(0);
- 					} else if (ic->parm.aux.subcmd == AT_EQ_QUERY) {
--						char *p = ic->parm.aux.para;
--						for(i=0;i<FAXMODCNT;i++)
--							if ((1<<i) & modmask)
--								p += sprintf(p, "%d,", faxmodulation[i]);
--						p--;
--						*p=0;
-+						strcpy(ic->parm.aux.para, faxmodulation_s);
- 						ic->command = ISDN_STAT_FAXIND;
- 						ic->parm.aux.cmd = ISDN_FAX_CLASS1_QUERY;
- 						cs->iif.statcallb(ic);
- 						return(0);
- 					} else if (ic->parm.aux.subcmd == AT_EQ_VALUE) {
--						if (cs->debug & L1_DEB_HSCX)
--							debugl1(cs, "isar_auxcmd %s=%d",
--								FC1_CMD[ic->parm.aux.cmd], ic->parm.aux.para[0]);
- 						for(i=0;i<FAXMODCNT;i++)
- 							if (faxmodulation[i]==ic->parm.aux.para[0])
- 								break;
--						if ((i < FAXMODCNT) && ((1<<i) & modmask) && 
-+						if ((FAXMODCNT > i) && 
- 							test_bit(BC_FLG_INIT, &bcs->Flag)) {
- 							isar_pump_cmd(bcs,
- 								ic->parm.aux.cmd,
-@@ -1850,7 +1762,7 @@
- 			break;
- 		case (ISDN_CMD_IOCTL):
- 			switch (ic->arg) {
--				case 9: /* load firmware */
-+				case (9): /* load firmware */
- 					features = ISDN_FEATURE_L2_MODEM |
- 						ISDN_FEATURE_L2_FAX |
- 						ISDN_FEATURE_L3_FCLASS1;
-@@ -1860,26 +1772,6 @@
- 					else 
- 						ll_run(cs, features);
- 					break;
--				case 20:
--					features = *(unsigned int *) ic->parm.num;
--					printk(KERN_DEBUG "HiSax: max modulation old(%04x) new(%04x)\n",
--						modmask, features);
--					modmask = features;
--					break;
--				case 21:
--					features = *(unsigned int *) ic->parm.num;
--					printk(KERN_DEBUG "HiSax: FRM extra delay old(%d) new(%d) ms\n",
--						frm_extra_delay, features);
--					if (features >= 0)
--						frm_extra_delay = features;
--					break;
--				case 22:
--					features = *(unsigned int *) ic->parm.num;
--					printk(KERN_DEBUG "HiSax: TOA old(%d) new(%d) db\n",
--						para_TOA, features);
--					if (features >= 0 && features < 32)
--						para_TOA = features;
--					break;
- 				default:
- 					printk(KERN_DEBUG "HiSax: invalid ioctl %d\n",
- 					       (int) ic->arg);
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/isar.h linux-2.4.29/drivers/isdn/hisax/isar.h
---- linux-2.4.29.old/drivers/isdn/hisax/isar.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/isar.h	2005-03-22 15:06:47.457878088 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isar.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: isar.h,v 1.11 2001/09/24 13:22:56 kai Exp $
-  *
-  * ISAR (Siemens PSB 7110) specific defines
-  *
-@@ -28,8 +28,6 @@
- #define ISAR_HIS_FIRM		0x1e
- #define ISAR_HIS_STDSP		0x08
- #define ISAR_HIS_DIAG		0x05
--#define ISAR_HIS_WAITSTATE	0x27
--#define ISAR_HIS_TIMERIRQ	0x25
- #define ISAR_HIS_P0CFG		0x3c
- #define ISAR_HIS_P12CFG		0x24
- #define ISAR_HIS_SARTCFG	0x25	
-@@ -45,10 +43,6 @@
- #define ISAR_HIS_DPS2		0x80
- #define SET_DPS(x)		((x<<6) & 0xc0)
- 
--#define ISAR_CMD_TIMERIRQ_OFF	0x20
--#define ISAR_CMD_TIMERIRQ_ON	0x21
--
--
- #define ISAR_IIS_MSCMSD		0x3f
- #define ISAR_IIS_VNR		0x15
- #define ISAR_IIS_DKEY		0x03
-@@ -213,8 +207,6 @@
- #define STFAX_ESCAPE	5
- #define STFAX_SILDET	6
- 
--#define ISDN_FAXPUMP_HALT	100
--
- extern int ISARVersion(struct IsdnCardState *cs, char *s);
- extern void isar_int_main(struct IsdnCardState *cs);
- extern void initisar(struct IsdnCardState *cs);
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/isdnl1.c linux-2.4.29/drivers/isdn/hisax/isdnl1.c
---- linux-2.4.29.old/drivers/isdn/hisax/isdnl1.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/isdnl1.c	2005-03-22 15:06:47.582859088 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdnl1.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: isdnl1.c,v 2.46 2001/09/24 13:22:56 kai Exp $
-  *
-  * common low level stuff for Siemens Chipsetbased isdn cards
-  *
-@@ -18,7 +18,7 @@
-  *
-  */
- 
--const char *l1_revision = "$Revision: 1.1.4.1 $";
-+const char *l1_revision = "$Revision: 2.46 $";
- 
- #define __NO_VERSION__
- #include <linux/init.h>
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/isdnl1.h linux-2.4.29/drivers/isdn/hisax/isdnl1.h
---- linux-2.4.29.old/drivers/isdn/hisax/isdnl1.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/isdnl1.h	2005-03-22 15:06:47.615854072 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdnl1.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: isdnl1.h,v 2.12 2001/09/24 13:22:56 kai Exp $
-  *
-  * Layer 1 defines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/isdnl2.c linux-2.4.29/drivers/isdn/hisax/isdnl2.c
---- linux-2.4.29.old/drivers/isdn/hisax/isdnl2.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/isdnl2.c	2005-03-22 15:06:47.631851640 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdnl2.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: isdnl2.c,v 2.30 2001/09/24 13:22:56 kai Exp $
-  *
-  * Author       Karsten Keil
-  *              based on the teles driver from Jan den Ouden
-@@ -20,7 +20,7 @@
- #include "hisax.h"
- #include "isdnl2.h"
- 
--const char *l2_revision = "$Revision: 1.1.4.1 $";
-+const char *l2_revision = "$Revision: 2.30 $";
- 
- static void l2m_debug(struct FsmInst *fi, char *fmt, ...);
- 
-@@ -1418,8 +1418,8 @@
- 	freewin(st);
- 	st->l2.tei = -1;
- 	stop_t200(st, 17);
--	st5_dl_release_l2l3(st);
- 	FsmChangeState(fi, ST_L2_1);
-+	st5_dl_release_l2l3(st);
- }
- 
- static void
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/isdnl2.h linux-2.4.29/drivers/isdn/hisax/isdnl2.h
---- linux-2.4.29.old/drivers/isdn/hisax/isdnl2.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/isdnl2.h	2005-03-22 15:06:47.647849208 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdnl2.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id$
-  *
-  * Layer 2 defines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/isdnl3.c linux-2.4.29/drivers/isdn/hisax/isdnl3.c
---- linux-2.4.29.old/drivers/isdn/hisax/isdnl3.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/isdnl3.c	2005-03-22 15:06:47.663846776 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdnl3.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: isdnl3.c,v 2.22 2001/09/24 13:22:56 kai Exp $
-  *
-  * Author       Karsten Keil
-  *              based on the teles driver from Jan den Ouden
-@@ -21,7 +21,7 @@
- #include "isdnl3.h"
- #include <linux/config.h>
- 
--const char *l3_revision = "$Revision: 1.1.4.1 $";
-+const char *l3_revision = "$Revision: 2.22 $";
- 
- static struct Fsm l3fsm;
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/isdnl3.h linux-2.4.29/drivers/isdn/hisax/isdnl3.h
---- linux-2.4.29.old/drivers/isdn/hisax/isdnl3.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/isdnl3.h	2005-03-22 15:06:47.679844344 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdnl3.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id$
-  *
-  * This software may be used and distributed according to the terms
-  * of the GNU General Public License, incorporated herein by reference.
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/isurf.c linux-2.4.29/drivers/isdn/hisax/isurf.c
---- linux-2.4.29.old/drivers/isdn/hisax/isurf.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/isurf.c	2005-03-22 15:06:47.699841304 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isurf.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: isurf.c,v 1.12 2001/09/24 13:22:56 kai Exp $
-  *
-  * low level stuff for Siemens I-Surf/I-Talk cards
-  *
-@@ -16,11 +16,10 @@
- #include "isac.h"
- #include "isar.h"
- #include "isdnl1.h"
--#include <linux/isapnp.h>
- 
- extern const char *CardType[];
- 
--static const char *ISurf_revision = "$Revision: 1.1.4.1 $";
-+static const char *ISurf_revision = "$Revision: 1.12 $";
- 
- #define byteout(addr,val) outb(val,addr)
- #define bytein(addr) inb(addr)
-@@ -128,8 +127,10 @@
- release_io_isurf(struct IsdnCardState *cs)
- {
- 	release_region(cs->hw.isurf.reset, 1);
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 	iounmap((unsigned char *)cs->hw.isurf.isar);
- 	release_mem_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE);
-+#endif
- }
- 
- static void
-@@ -194,10 +195,6 @@
- 	return(isar_auxcmd(cs, ic));
- }
- 
--#ifdef __ISAPNP__
--static struct pci_bus *pnp_surf __devinitdata = NULL;
--#endif
--
- int __init
- setup_isurf(struct IsdnCard *card)
- {
-@@ -215,58 +212,9 @@
- 		cs->hw.isurf.phymem = card->para[2];
- 		cs->irq = card->para[0];
- 	} else {
--#ifdef __ISAPNP__
--		struct pci_bus *pb;
--		struct pci_dev *pd;
--
--		if (isapnp_present()) {
--			cs->subtyp = 0;
--			if ((pb = isapnp_find_card(
--				ISAPNP_VENDOR('S', 'I', 'E'),
--				ISAPNP_FUNCTION(0x0010), pnp_surf))) {
--				pnp_surf = pb;
--				pd = NULL;
--				if (!(pd = isapnp_find_dev(pnp_surf,
--					ISAPNP_VENDOR('S', 'I', 'E'),
--					ISAPNP_FUNCTION(0x0010), pd))) {
--					printk(KERN_ERR "ISurfPnP: PnP error card found, no device\n");
--					return (0);
--				}
--				pd->prepare(pd);
--				pd->deactivate(pd);
--				pd->activate(pd);
--				/* The ISA-PnP logic apparently
--				 * expects upper limit address to be
--				 * set. Since the isa-pnp module
--				 * doesn't do this, so we have to make
--				 * up for it.
--				 */
--				isapnp_cfg_begin(pd->bus->number, pd->devfn);
--				isapnp_write_word(ISAPNP_CFG_MEM+3, 
--					pd->resource[8].end >> 8);
--				isapnp_cfg_end();
--				cs->hw.isurf.reset = pd->resource[0].start;
--				cs->hw.isurf.phymem = pd->resource[8].start;
--				cs->irq = pd->irq_resource[0].start;
--				if (!cs->irq || !cs->hw.isurf.reset || !cs->hw.isurf.phymem) {
--					printk(KERN_ERR "ISurfPnP:some resources are missing %d/%x/%lx\n",
--						cs->irq, cs->hw.isurf.reset, cs->hw.isurf.phymem);
--					pd->deactivate(pd);
--					return(0);
--				}
--			} else {
--				printk(KERN_INFO "ISurfPnP: no ISAPnP card found\n");
--				return(0);
--			}
--		} else {
--			printk(KERN_INFO "ISurfPnP: no ISAPnP bus found\n");
--			return(0);
--		}
--#else
- 		printk(KERN_WARNING "HiSax: %s port/mem not set\n",
- 			CardType[card->typ]);
- 		return (0);
--#endif
- 	}
- 	if (check_region(cs->hw.isurf.reset, 1)) {
- 		printk(KERN_WARNING
-@@ -277,6 +225,7 @@
- 	} else {
- 		request_region(cs->hw.isurf.reset, 1, "isurf isdn");
- 	}
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 	if (check_mem_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE)) {
- 		printk(KERN_WARNING
- 			"HiSax: %s memory region %lx-%lx already in use\n",
-@@ -292,6 +241,10 @@
- 	cs->hw.isurf.isar =
- 		(unsigned long) ioremap(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE);
- 	cs->hw.isurf.isac = cs->hw.isurf.isar + ISURF_ISAC_OFFSET;
-+#else
-+	cs->hw.isurf.isar = cs->hw.isurf.phymem + ISURF_ISAR_OFFSET;
-+	cs->hw.isurf.isac = cs->hw.isurf.phymem + ISURF_ISAC_OFFSET;
-+#endif
- 	printk(KERN_INFO
- 	       "ISurf: defined at 0x%x 0x%lx IRQ %d\n",
- 	       cs->hw.isurf.reset,
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/ix1_micro.c linux-2.4.29/drivers/isdn/hisax/ix1_micro.c
---- linux-2.4.29.old/drivers/isdn/hisax/ix1_micro.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/ix1_micro.c	2005-03-22 15:06:47.714839024 +0100
-@@ -1,4 +1,4 @@
--/* $Id: ix1_micro.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: ix1_micro.c,v 2.12 2001/09/24 13:22:56 kai Exp $
-  *
-  * low level stuff for ITK ix1-micro Rev.2 isdn cards
-  * derived from the original file teles3.c from Karsten Keil
-@@ -19,14 +19,13 @@
- 
- #define __NO_VERSION__
- #include <linux/init.h>
--#include <linux/isapnp.h>
- #include "hisax.h"
- #include "isac.h"
- #include "hscx.h"
- #include "isdnl1.h"
- 
- extern const char *CardType[];
--const char *ix1_revision = "$Revision: 1.1.4.1 $";
-+const char *ix1_revision = "$Revision: 2.12 $";
- 
- #define byteout(addr,val) outb(val,addr)
- #define bytein(addr) inb(addr)
-@@ -219,21 +218,6 @@
- 	return(0);
- }
- 
--#ifdef __ISAPNP__
--static struct isapnp_device_id itk_ids[] __initdata = {
--	{ ISAPNP_VENDOR('I', 'T', 'K'), ISAPNP_FUNCTION(0x25),
--	  ISAPNP_VENDOR('I', 'T', 'K'), ISAPNP_FUNCTION(0x25), 
--	  (unsigned long) "ITK micro 2" },
--	{ ISAPNP_VENDOR('I', 'T', 'K'), ISAPNP_FUNCTION(0x29),
--	  ISAPNP_VENDOR('I', 'T', 'K'), ISAPNP_FUNCTION(0x29), 
--	  (unsigned long) "ITK micro 2." },
--	{ 0, }
--};
--
--static struct isapnp_device_id *idev = &itk_ids[0];
--static struct pci_bus *pnp_c __devinitdata = NULL;
--#endif
--
- 
- int __init
- setup_ix1micro(struct IsdnCard *card)
-@@ -246,45 +230,6 @@
- 	if (cs->typ != ISDN_CTYPE_IX1MICROR2)
- 		return (0);
- 
--#ifdef __ISAPNP__
--	if (!card->para[1] && isapnp_present()) {
--		struct pci_bus *pb;
--		struct pci_dev *pd;
--
--		while(idev->card_vendor) {
--			if ((pb = isapnp_find_card(idev->card_vendor,
--				idev->card_device, pnp_c))) {
--				pnp_c = pb;
--				pd = NULL;
--				if ((pd = isapnp_find_dev(pnp_c,
--					idev->vendor, idev->function, pd))) {
--					printk(KERN_INFO "HiSax: %s detected\n",
--						(char *)idev->driver_data);
--					pd->prepare(pd);
--					pd->deactivate(pd);
--					pd->activate(pd);
--					card->para[1] = pd->resource[0].start;
--					card->para[0] = pd->irq_resource[0].start;
--					if (!card->para[0] || !card->para[1]) {
--						printk(KERN_ERR "ITK PnP:some resources are missing %ld/%lx\n",
--						card->para[0], card->para[1]);
--						pd->deactivate(pd);
--						return(0);
--					}
--					break;
--				} else {
--					printk(KERN_ERR "ITK PnP: PnP error card found, no device\n");
--				}
--			}
--			idev++;
--			pnp_c=NULL;
--		} 
--		if (!idev->card_vendor) {
--			printk(KERN_INFO "ITK PnP: no ISAPnP card found\n");
--			return(0);
--		}
--	}
--#endif
- 	/* IO-Ports */
- 	cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
- 	cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/jade.c linux-2.4.29/drivers/isdn/hisax/jade.c
---- linux-2.4.29.old/drivers/isdn/hisax/jade.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/jade.c	2005-03-22 15:06:47.729836744 +0100
-@@ -1,4 +1,4 @@
--/* $Id: jade.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: jade.c,v 1.9 2001/09/24 13:22:56 kai Exp $
-  *
-  * JADE stuff (derived from original hscx.c)
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/jade.h linux-2.4.29/drivers/isdn/hisax/jade.h
---- linux-2.4.29.old/drivers/isdn/hisax/jade.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/jade.h	2005-03-22 15:06:47.745834312 +0100
-@@ -1,4 +1,4 @@
--/* $Id: jade.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: jade.h,v 1.5 2001/09/24 13:22:56 kai Exp $
-  *
-  * JADE specific defines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/jade_irq.c linux-2.4.29/drivers/isdn/hisax/jade_irq.c
---- linux-2.4.29.old/drivers/isdn/hisax/jade_irq.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/jade_irq.c	2005-03-22 15:06:47.760832032 +0100
-@@ -1,4 +1,4 @@
--/* $Id: jade_irq.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: jade_irq.c,v 1.7 2001/09/24 13:22:56 kai Exp $
-  *
-  * Low level JADE IRQ stuff (derived from original hscx_irq.c)
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/l3_1tr6.c linux-2.4.29/drivers/isdn/hisax/l3_1tr6.c
---- linux-2.4.29.old/drivers/isdn/hisax/l3_1tr6.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/l3_1tr6.c	2005-03-22 15:06:47.777829448 +0100
-@@ -1,4 +1,4 @@
--/* $Id: l3_1tr6.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: l3_1tr6.c,v 2.15 2001/09/24 13:22:56 kai Exp $
-  *
-  * German 1TR6 D-channel protocol
-  *
-@@ -20,7 +20,7 @@
- #include <linux/ctype.h>
- 
- extern char *HiSax_getrev(const char *revision);
--const char *l3_1tr6_revision = "$Revision: 1.1.4.1 $";
-+const char *l3_1tr6_revision = "$Revision: 2.15 $";
- 
- #define MsgHead(ptr, cref, mty, dis) \
- 	*ptr++ = dis; \
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/l3_1tr6.h linux-2.4.29/drivers/isdn/hisax/l3_1tr6.h
---- linux-2.4.29.old/drivers/isdn/hisax/l3_1tr6.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/l3_1tr6.h	2005-03-22 15:06:47.796826560 +0100
-@@ -1,4 +1,4 @@
--/* $Id: l3_1tr6.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id$
-  *
-  * German 1TR6 D-channel protocol defines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/l3dss1.c linux-2.4.29/drivers/isdn/hisax/l3dss1.c
---- linux-2.4.29.old/drivers/isdn/hisax/l3dss1.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/l3dss1.c	2005-03-22 15:06:47.822822608 +0100
-@@ -1,4 +1,4 @@
--/* $Id: l3dss1.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: l3dss1.c,v 2.32 2001/09/24 13:22:56 kai Exp $
-  *
-  * EURO/DSS1 D-channel protocol
-  *
-@@ -27,7 +27,7 @@
- #include <linux/config.h>
- 
- extern char *HiSax_getrev(const char *revision);
--const char *dss1_revision = "$Revision: 1.1.4.1 $";
-+const char *dss1_revision = "$Revision: 2.32 $";
- 
- #define EXT_BEARER_CAPS 1
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/l3dss1.h linux-2.4.29/drivers/isdn/hisax/l3dss1.h
---- linux-2.4.29.old/drivers/isdn/hisax/l3dss1.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/l3dss1.h	2005-03-22 15:06:47.842819568 +0100
-@@ -1,4 +1,4 @@
--/* $Id: l3dss1.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id$
-  *
-  * DSS1 (Euro) D-channel protocol defines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/l3ni1.c linux-2.4.29/drivers/isdn/hisax/l3ni1.c
---- linux-2.4.29.old/drivers/isdn/hisax/l3ni1.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/l3ni1.c	2005-03-22 15:06:47.859816984 +0100
-@@ -1,4 +1,4 @@
--/* $Id: l3ni1.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: l3ni1.c,v 2.8 2001/09/24 13:22:56 kai Exp $
-  *
-  * NI1 D-channel protocol
-  *
-@@ -25,7 +25,7 @@
- #include <linux/ctype.h>
- 
- extern char *HiSax_getrev(const char *revision);
--const char *ni1_revision = "$Revision: 1.1.4.1 $";
-+const char *ni1_revision = "$Revision: 2.8 $";
- 
- #define EXT_BEARER_CAPS 1
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/l3ni1.h linux-2.4.29/drivers/isdn/hisax/l3ni1.h
---- linux-2.4.29.old/drivers/isdn/hisax/l3ni1.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/l3ni1.h	2005-03-22 15:06:47.877814248 +0100
-@@ -1,4 +1,4 @@
--/* $Id: l3ni1.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id$
-  *
-  * NI1 D-channel protocol
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/lmgr.c linux-2.4.29/drivers/isdn/hisax/lmgr.c
---- linux-2.4.29.old/drivers/isdn/hisax/lmgr.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/lmgr.c	2005-03-22 15:06:47.895811512 +0100
-@@ -1,4 +1,4 @@
--/* $Id: lmgr.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id$
-  *
-  * Layermanagement module
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/md5sums.asc linux-2.4.29/drivers/isdn/hisax/md5sums.asc
---- linux-2.4.29.old/drivers/isdn/hisax/md5sums.asc	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/md5sums.asc	2005-03-22 15:06:47.910809232 +0100
-@@ -1,33 +1,22 @@
-------BEGIN PGP SIGNED MESSAGE-----
--Hash: SHA1
--
- # This are valid md5sums for certificated HiSax driver.
- # The certification is valid only if the md5sums of all files match.
- # The certification is valid only for ELSA Microlink PCI,
--# Eicon Technology Diva 2.01 PCI, Sedlbauer SpeedFax+,
--# HFC-S PCI A based cards and HFC-S USB based ISDN
--# terminal adapters in the moment.
-+# Eicon Technology Diva 2.01 PCI, Sedlbauer SpeedFax+, 
-+# HFC-S PCI A based cards and HFC-S USB based isdn tas 
-+# in the moment.
- # Read ../../../Documentation/isdn/HiSax.cert for more informations.
- # 
--cd4a9917e1147039d5dfc66440d42054  isac.c
--211840e78b56c9d4753be9c85da21a50  isdnl1.c
--5ce9b1fff42a02f9c2eb4fb81c701b1f  isdnl2.c
--6948de0c43513dd23c6706feb5fc2209  isdnl3.c
--3730780b69368218d756024165efea79  tei.c
--16e72710eb58da01415b877490f5d2ac  callc.c
--6abc55c77e0f3149ae9334f3257a1a1a  cert.c
--27bdb2800d4590e00da20eff241edc47  l3dss1.c
--df8bb877b854c4302d396b554e4e84ef  l3_1tr6.c
--9d8b4bed15370063d1b16e47080f50e1  elsa.c
--210f4a3f1eebca70229d786b15cf3e90  diva.c
--4ddf21079dd77e892380f789bae250a7  sedlbauer.c
--8200d818771e3cbdef2a3c3e818d25ac  hfc_pci.c
-+6f9433a8b696076562562d090e3c420f  isac.c
-+13c3eed869f5139f44c563e3a8fea1f5  isdnl1.c
-+addcff863b0ff1e366c0f2ae9fa6e81e  isdnl2.c
-+7076deb94a363945c21ea27aca4a720a  isdnl3.c
-+51c603829b6cc4f8421f744ad657ceff  tei.c
-+669050ab5079f02887ed0239d86e5474  callc.c
-+ecacd146b8f8881ef9349935dab3df4a  cert.c
-+fadeb3b85bb23bc1ac48470c0848d6fa  l3dss1.c
-+cf7dec9fac6283716904d26b99188476  l3_1tr6.c
-+2f75c8765e1be13d114d5f4433cf364b  elsa.c
-+b4cf8a4dceed9ea6dcba65a85b4eecc7  diva.c
-+dee3f8f40c6fe78a4b57729804b7e6cd  sedlbauer.c
-+0d79fe6dfc5bfaa4826970c41a6d273d  hfc_pci.c
- # end of md5sums
-------BEGIN PGP SIGNATURE-----
--Version: GnuPG v1.0.6 (GNU/Linux)
--Comment: For info see http://www.gnupg.org
--
--iD8DBQE9rE91DiY0VZsg4ukRAkKfAJ4xWUfqjc0hW+V+JPue5yr7mrt+RwCdGdSf
--GIKgAEdRLzERmpt/bCCwAbY=
--=FaHw
-------END PGP SIGNATURE-----
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/mic.c linux-2.4.29/drivers/isdn/hisax/mic.c
---- linux-2.4.29.old/drivers/isdn/hisax/mic.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/mic.c	2005-03-22 15:06:47.926806800 +0100
-@@ -1,4 +1,4 @@
--/* $Id: mic.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: mic.c,v 1.12 2001/09/24 13:22:56 kai Exp $
-  *
-  * low level stuff for mic cards
-  *
-@@ -19,7 +19,7 @@
- 
- extern const char *CardType[];
- 
--const char *mic_revision = "$Revision: 1.1.4.1 $";
-+const char *mic_revision = "$Revision: 1.12 $";
- 
- #define byteout(addr,val) outb(val,addr)
- #define bytein(addr) inb(addr)
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/netjet.c linux-2.4.29/drivers/isdn/hisax/netjet.c
---- linux-2.4.29.old/drivers/isdn/hisax/netjet.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/netjet.c	2005-03-22 15:06:47.941804520 +0100
-@@ -1,4 +1,4 @@
--/* $Id: netjet.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: netjet.c,v 1.29 2001/09/24 13:22:56 kai Exp $
-  *
-  * low level stuff for Traverse Technologie NETJet ISDN cards
-  *
-@@ -8,9 +8,7 @@
-  * This software may be used and distributed according to the terms
-  * of the GNU General Public License, incorporated herein by reference.
-  *
-- * Thanks to Traverse Technologies Australia for documents and information
-- *
-- * 16-Apr-2002 - led code added - Guy Ellis (guy@traverse.com.au)
-+ * Thanks to Traverse Technologie Australia for documents and information
-  *
-  */
- 
-@@ -26,7 +24,7 @@
- #include <asm/io.h>
- #include "netjet.h"
- 
--const char *NETjet_revision = "$Revision: 1.1.4.1 $";
-+const char *NETjet_revision = "$Revision: 1.29 $";
- 
- /* Interface functions */
- 
-@@ -135,7 +133,6 @@
- mode_tiger(struct BCState *bcs, int mode, int bc)
- {
- 	struct IsdnCardState *cs = bcs->cs;
--        u_char led;
- 
- 	if (cs->debug & L1_DEB_HSCX)
- 		debugl1(cs, "Tiger mode %d bchan %d/%d",
-@@ -157,15 +154,6 @@
- 					cs->hw.njet.dmactrl);
- 				byteout(cs->hw.njet.base + NETJET_IRQMASK0, 0);
- 			}
--                        if (cs->typ == ISDN_CTYPE_NETJET_S)
--                        {
--                                // led off
--                                led = bc & 0x01;
--                                led = 0x01 << (6 + led); // convert to mask
--                                led = ~led;
--                                cs->hw.njet.auxd &= led;
--                                byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
--                        }
- 			break;
- 		case (L1_MODE_TRANS):
- 			break;
-@@ -191,14 +179,6 @@
- 			bcs->hw.tiger.sendp = bcs->hw.tiger.send;
- 			bcs->hw.tiger.free = NETJET_DMA_TXSIZE;
- 			test_and_set_bit(BC_FLG_EMPTY, &bcs->Flag);
--                        if (cs->typ == ISDN_CTYPE_NETJET_S)
--                        {
--                                // led on
--                                led = bc & 0x01;
--                                led = 0x01 << (6 + led); // convert to mask
--                                cs->hw.njet.auxd |= led;
--                                byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
--                        }
- 			break;
- 	}
- 	if (cs->debug & L1_DEB_HSCX)
-@@ -874,13 +854,9 @@
- 		case (PH_ACTIVATE | REQUEST):
- 			test_and_set_bit(BC_FLG_ACTIV, &st->l1.bcs->Flag);
- 			mode_tiger(st->l1.bcs, st->l1.mode, st->l1.bc);
--			/* 2001/10/04 Christoph Ersfeld, Formula-n Europe AG */
--			st->l1.bcs->cs->cardmsg(st->l1.bcs->cs, MDL_BC_ASSIGN, (void *)(&st->l1.bc));
- 			l1_msg_b(st, pr, arg);
- 			break;
- 		case (PH_DEACTIVATE | REQUEST):
--			/* 2001/10/04 Christoph Ersfeld, Formula-n Europe AG */
--			st->l1.bcs->cs->cardmsg(st->l1.bcs->cs, MDL_BC_RELEASE, (void *)(&st->l1.bc));
- 			l1_msg_b(st, pr, arg);
- 			break;
- 		case (PH_DEACTIVATE | CONFIRM):
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/netjet.h linux-2.4.29/drivers/isdn/hisax/netjet.h
---- linux-2.4.29.old/drivers/isdn/hisax/netjet.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/netjet.h	2005-03-22 15:06:47.956802240 +0100
-@@ -1,4 +1,4 @@
--/* $Id: netjet.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: netjet.h,v 2.8 2001/09/24 13:22:56 kai Exp $
-  *
-  * NETjet common header file
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/niccy.c linux-2.4.29/drivers/isdn/hisax/niccy.c
---- linux-2.4.29.old/drivers/isdn/hisax/niccy.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/niccy.c	2005-03-22 15:06:47.977799048 +0100
-@@ -1,4 +1,4 @@
--/* $Id: niccy.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: niccy.c,v 1.21 2001/10/20 22:05:00 kai Exp $
-  *
-  * low level stuff for Dr. Neuhaus NICCY PnP and NICCY PCI and
-  * compatible (SAGEM cybermodem)
-@@ -22,10 +22,10 @@
- #include "hscx.h"
- #include "isdnl1.h"
- #include <linux/pci.h>
--#include <linux/isapnp.h>
-+#include <linux/isdn_compat.h>
- 
- extern const char *CardType[];
--const char *niccy_revision = "$Revision: 1.1.4.1 $";
-+const char *niccy_revision = "$Revision: 1.21 $";
- 
- #define byteout(addr,val) outb(val,addr)
- #define bytein(addr) inb(addr)
-@@ -239,9 +239,6 @@
- }
- 
- static struct pci_dev *niccy_dev __initdata = NULL;
--#ifdef __ISAPNP__
--static struct pci_bus *pnp_c __devinitdata = NULL;
--#endif
- 
- int __init
- setup_niccy(struct IsdnCard *card)
-@@ -253,39 +250,7 @@
- 	printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp));
- 	if (cs->typ != ISDN_CTYPE_NICCY)
- 		return (0);
--#ifdef __ISAPNP__
--	if (!card->para[1] && isapnp_present()) {
--		struct pci_bus *pb;
--		struct pci_dev *pd;
--
--		if ((pb = isapnp_find_card(
--			ISAPNP_VENDOR('S', 'D', 'A'),
--			ISAPNP_FUNCTION(0x0150), pnp_c))) {
--			pnp_c = pb;
--			pd = NULL;
--			if (!(pd = isapnp_find_dev(pnp_c,
--				ISAPNP_VENDOR('S', 'D', 'A'),
--				ISAPNP_FUNCTION(0x0150), pd))) {
--				printk(KERN_ERR "NiccyPnP: PnP error card found, no device\n");
--				return (0);
--			}
--			pd->prepare(pd);
--			pd->deactivate(pd);
--			pd->activate(pd);
--			card->para[1] = pd->resource[0].start;
--			card->para[2] = pd->resource[1].start;
--			card->para[0] = pd->irq_resource[0].start;
--			if (!card->para[0] || !card->para[1] || !card->para[2]) {
--				printk(KERN_ERR "NiccyPnP:some resources are missing %ld/%lx/%lx\n",
--					card->para[0], card->para[1], card->para[2]);
--				pd->deactivate(pd);
--				return(0);
--			}
--		} else {
--			printk(KERN_INFO "NiccyPnP: no ISAPnP card found\n");
--		}
--	}
--#endif
-+
- 	if (card->para[1]) {
- 		cs->hw.niccy.isac = card->para[1] + ISAC_PNP;
- 		cs->hw.niccy.hscx = card->para[1] + HSCX_PNP;
-@@ -331,12 +296,12 @@
- 				return(0);
- 			}
- 			cs->irq = niccy_dev->irq;
--			cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0);
-+			cs->hw.niccy.cfg_reg = pci_resource_start_io(niccy_dev, 0);
- 			if (!cs->hw.niccy.cfg_reg) {
- 				printk(KERN_WARNING "Niccy: No IO-Adr for PCI cfg found\n");
- 				return(0);
- 			}
--			pci_ioaddr = pci_resource_start(niccy_dev, 1);
-+			pci_ioaddr = pci_resource_start_io(niccy_dev, 1);
- 			if (!pci_ioaddr) {
- 				printk(KERN_WARNING "Niccy: No IO-Adr for PCI card found\n");
- 				return(0);
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/nj_s.c linux-2.4.29/drivers/isdn/hisax/nj_s.c
---- linux-2.4.29.old/drivers/isdn/hisax/nj_s.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/nj_s.c	2005-03-22 15:06:47.993796616 +0100
-@@ -1,4 +1,4 @@
--/* $Id: nj_s.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: nj_s.c,v 2.13 2001/09/24 13:22:56 kai Exp $
-  *
-  * This software may be used and distributed according to the terms
-  * of the GNU General Public License, incorporated herein by reference.
-@@ -12,11 +12,12 @@
- #include "isac.h"
- #include "isdnl1.h"
- #include <linux/pci.h>
-+#include <linux/isdn_compat.h>
- #include <linux/interrupt.h>
- #include <linux/ppp_defs.h>
- #include "netjet.h"
- 
--const char *NETjet_S_revision = "$Revision: 1.1.4.1 $";
-+const char *NETjet_S_revision = "$Revision: 2.13 $";
- 
- static u_char dummyrr(struct IsdnCardState *cs, int chan, u_char off)
- {
-@@ -130,7 +131,6 @@
- 			release_io_netjet(cs);
- 			return(0);
- 		case CARD_INIT:
--			reset_netjet_s(cs);
- 			inittiger(cs);
- 			clear_pending_isac_ints(cs);
- 			initisac(cs);
-@@ -180,19 +180,11 @@
- 				printk(KERN_WARNING "NETjet-S: No IRQ for PCI card found\n");
- 				return(0);
- 			}
--			cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
-+			cs->hw.njet.base = pci_resource_start_io(dev_netjet, 0);
- 			if (!cs->hw.njet.base) {
- 				printk(KERN_WARNING "NETjet-S: No IO-Adr for PCI card found\n");
- 				return(0);
- 			}
--			/* 2001/10/04 Christoph Ersfeld, Formula-n Europe AG www.formula-n.com */
--			if ((dev_netjet->subsystem_vendor == 0x55) &&
--				(dev_netjet->subsystem_device == 0x02)) {
--				printk(KERN_WARNING "Netjet: You tried to load this driver with an incompatible TigerJet-card\n");
--				printk(KERN_WARNING "Use type=41 for Formula-n enter:now ISDN PCI and compatible\n");
--				return(0);
--			}
--			/* end new code */
- 		} else {
- 			printk(KERN_WARNING "NETjet-S: No PCI card found\n");
- 			return(0);
-@@ -263,6 +255,7 @@
- 	} else {
- 		request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn");
- 	}
-+	reset_netjet_s(cs);
- 	cs->readisac  = &NETjet_ReadIC;
- 	cs->writeisac = &NETjet_WriteIC;
- 	cs->readisacfifo  = &NETjet_ReadICfifo;
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/nj_u.c linux-2.4.29/drivers/isdn/hisax/nj_u.c
---- linux-2.4.29.old/drivers/isdn/hisax/nj_u.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/nj_u.c	2005-03-22 15:06:48.008794336 +0100
-@@ -1,4 +1,4 @@
--/* $Id: nj_u.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $ 
-+/* $Id: nj_u.c,v 2.14 2001/09/24 13:22:56 kai Exp $ 
-  *
-  * This software may be used and distributed according to the terms
-  * of the GNU General Public License, incorporated herein by reference.
-@@ -12,11 +12,12 @@
- #include "icc.h"
- #include "isdnl1.h"
- #include <linux/pci.h>
-+#include <linux/isdn_compat.h>
- #include <linux/interrupt.h>
- #include <linux/ppp_defs.h>
- #include "netjet.h"
- 
--const char *NETjet_U_revision = "$Revision: 1.1.4.1 $";
-+const char *NETjet_U_revision = "$Revision: 2.14 $";
- 
- static u_char dummyrr(struct IsdnCardState *cs, int chan, u_char off)
- {
-@@ -181,7 +182,7 @@
- 				printk(KERN_WARNING "NETspider-U: No IRQ for PCI card found\n");
- 				return(0);
- 			}
--			cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
-+			cs->hw.njet.base = pci_resource_start_io(dev_netjet, 0);
- 			if (!cs->hw.njet.base) {
- 				printk(KERN_WARNING "NETspider-U: No IO-Adr for PCI card found\n");
- 				return(0);
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/q931.c linux-2.4.29/drivers/isdn/hisax/q931.c
---- linux-2.4.29.old/drivers/isdn/hisax/q931.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/q931.c	2005-03-22 15:06:48.032790688 +0100
-@@ -1,4 +1,4 @@
--/* $Id: q931.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: q931.c,v 1.12 2001/09/24 13:22:56 kai Exp $
-  *
-  * code to decode ITU Q.931 call control messages
-  *
-@@ -197,6 +197,31 @@
- 
- #define MT_N1_LEN (sizeof(mt_n1) / sizeof(struct MessageType))
- 
-+#if 0
-+static struct MessageType fac_1tr6[] =
-+{
-+	{FAC_Sperre, "Sperre"},
-+	{FAC_Forward1, "Forward 1"},
-+	{FAC_Forward2, "Forward 2"},
-+	{FAC_Konferenz, "Konferenz"},
-+	{FAC_GrabBchan, "Grab Bchannel"},
-+	{FAC_Reactivate, "Reactivate"},
-+	{FAC_Konferenz3, "Dreier Konferenz"},
-+	{FAC_Dienstwechsel1, "Einseitiger Dienstwechsel"},
-+	{FAC_Dienstwechsel2, "Zweiseitiger Dienstwechsel"},
-+	{FAC_NummernIdent, "Rufnummer-Identifizierung"},
-+	{FAC_GBG, "GBG"},
-+	{FAC_DisplayUebergeben, "Display Uebergeben"},
-+	{FAC_DisplayUmgeleitet, "Display Umgeleitet"},
-+	{FAC_Unterdruecke, "Unterdruecke Rufnummer"},
-+	{FAC_Deactivate, "Deactivate"},
-+	{FAC_Activate, "Activate"},
-+	{FAC_SPV, "SPV"},
-+	{FAC_Rueckwechsel, "Rueckwechsel"},
-+	{FAC_Umleitung, "Umleitung"}
-+};
-+#define FAC_1TR6_LEN (sizeof(fac_1tr6) / sizeof(struct MessageType))
-+#endif
- 
- static int
- prbits(char *dest, u_char b, int start, int len)
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/rawhdlc.c linux-2.4.29/drivers/isdn/hisax/rawhdlc.c
---- linux-2.4.29.old/drivers/isdn/hisax/rawhdlc.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/rawhdlc.c	2005-03-22 15:06:48.047788408 +0100
-@@ -0,0 +1,543 @@
-+/* $Id: rawhdlc.c,v 1.7 2001/09/24 13:22:57 kai Exp $
-+ *
-+ * support routines for cards that don't support HDLC
-+ *
-+ * Author     Brent Baccala
-+ * Copyright  by Karsten Keil <keil@isdn4linux.de>
-+ *            by Brent Baccala <baccala@FreeSoft.org>
-+ *
-+ * This software may be used and distributed according to the terms
-+ * of the GNU General Public License, incorporated herein by reference.
-+ *
-+ *
-+ * Some passive ISDN cards, such as the Traverse NETJet and the AMD 7930,
-+ * don't perform HDLC encapsulation over the B channel.  Drivers for
-+ * such cards use support routines in this file to perform B channel HDLC.
-+ *
-+ * Bit-synchronous HDLC encapsulation is a means of encapsulating packets
-+ * over a continuously transmitting serial communications link.
-+ * It looks like this:
-+ *
-+ *      11111111101111110...........0111111011111111111
-+ *      iiiiiiiiiffffffffdddddddddddffffffffiiiiiiiiiii
-+ *
-+ *      i = idle     f = flag     d = data
-+ *
-+ * When idle, the channel sends a continuous string of ones (mark
-+ * idle; illustrated), or a continuous string of flag characters (flag
-+ * idle).  The beginning of a data frame is marked by a flag character
-+ * (01111110), then comes the actual data, followed by another flag
-+ * character, after which another frame may be sent immediately (a
-+ * single flag may serve as both the end of one frame and the start of
-+ * the next), or the link may return to idle.  Obviously, the flag
-+ * character can not appear anywhere in the data (or a false
-+ * end-of-frame would occur), so the transmitter performs
-+ * "bit-stuffing" - inserting a zero bit after every five one bits,
-+ * irregardless of the original bit after the five ones.  Byte
-+ * ordering is irrelevent at this point - the data is treated as a
-+ * string of bits, not bytes.  Since no more than 5 ones may now occur
-+ * in a row, the flag sequence, with its 6 ones, is unique.
-+ *
-+ * Upon reception, a zero bit that occur after 5 one bits is simply
-+ * discarded.  A series of 6 one bits is end-of-frame, and a series of
-+ * 7 one bits is an abort.  Once bit-stuffing has been corrected for,
-+ * an integer number of bytes should now be present.  The last two
-+ * of these bytes form the Frame Check Sequence, a CRC that is verified
-+ * and then discarded.  Note that bit-stuffing is performed on the FCS
-+ * just as if it were regular data.
-+ *
-+ *
-+ *
-+ * int make_raw_hdlc_data(u_char *src, u_int slen,
-+ *                        u_char *dst, u_int dsize)
-+ *
-+ *   Used for transmission.  Copies slen bytes from src to dst, performing
-+ *   HDLC encapsulation (flag bytes, bit-stuffing, CRC) in the process.
-+ *   dsize is size of destination buffer, and should be at least
-+ *   ((6*slen)/5)+5 bytes to ensure adequate space will be available.
-+ *   Function returns length (in bytes) of valid destination buffer, or
-+ *   0 upon destination overflow.
-+ *
-+ * void init_hdlc_state(struct hdlc_state *stateptr, int mode)
-+ *
-+ *   Initializes hdlc_state structure before first call to read_raw_hdlc_data
-+ *
-+ *   mode = 0: Sane mode
-+ *   mode = 1/2: 
-+ *             Insane mode; NETJet use a shared unsigned int memory block (
-+ * 	       with busmaster DMA), the bit pattern of every word is 
-+ *  	       <8 B1> <8 B2> <8 Mon> <2 D> <4 C/I> <MX> <MR>
-+ *	       according to Siemens IOM-2 interface, so we have to handle
-+ *             the src buffer as unsigned int and have to shift/mask the
-+ *             B-channel bytes.
-+ *             mode 1 -> B1  mode 2  -> B2 data is used
-+ *
-+ * int read_raw_hdlc_data(struct hdlc_state *saved_state,
-+ *                        u_char *src, u_int slen,
-+ *                        u_char *dst, u_int dsize)
-+ *
-+ *   Used for reception.  Scans source buffer bit-by-bit looking for
-+ *   valid HDLC frames, which are copied to destination buffer.  HDLC
-+ *   state information is stored in a structure, which allows this
-+ *   function to process frames spread across several blocks of raw
-+ *   HDLC data.  Part of the state information is bit offsets into
-+ *   the source and destination buffers.
-+ *
-+ *   A return value >0 indicates the length of a valid frame, now
-+ *   stored in the destination buffer.  In this case, the source
-+ *   buffer might not be completely processed, so this function should
-+ *   be called again with the same source buffer, possibly with a
-+ *   different destination buffer.
-+ *
-+ *   A return value of zero indicates that the source buffer was
-+ *   completely processed without finding a valid end-of-packet;
-+ *   however, we might be in the middle of packet reception, so
-+ *   the function should be called again with the next block of
-+ *   raw HDLC data and the same destination buffer.  It is NOT
-+ *   permitted to change the destination buffer in this case,
-+ *   since data may already have begun to be stored there.
-+ *
-+ *   A return value of -1 indicates some kind of error - destination
-+ *   buffer overflow, CRC check failed, frame not a multiple of 8
-+ *   bits.  Destination buffer probably contains invalid data, which
-+ *   should be discarded.  Call function again with same source buffer
-+ *   and a new (or same) destination buffer.
-+ *
-+ *   Suggested calling sequence:
-+ *
-+ *      init_hdlc_state(...);
-+ *      for (EACH_RAW_DATA_BLOCK) {
-+ *         while (len = read_raw_hdlc_data(...)) {
-+ *             if (len == -1) DISCARD_FRAME;
-+ *             else PROCESS_FRAME;
-+ *         }
-+ *      }
-+ *
-+ *
-+ * Test the code in this file as follows:
-+ *    gcc -DDEBUGME -o rawhdlctest rawhdlc.c
-+ *    ./rawhdlctest < rawdata
-+ *
-+ * The file "rawdata" can be easily generated from a HISAX B-channel
-+ * hex dump (CF CF CF 02 ...) using the following perl script:
-+ *
-+ * while(<>) {
-+ *     @hexlist = split ' ';
-+ *     while ($hexstr = shift(@hexlist)) {
-+ *         printf "%c", hex($hexstr);
-+ *     }
-+ * }
-+ *
-+ */
-+
-+#ifdef DEBUGME
-+#include <stdio.h>
-+#endif
-+
-+#include <linux/types.h>
-+#include <linux/ppp_defs.h>
-+#include "rawhdlc.h"
-+
-+/* There's actually an identical copy of this table in the PPP code
-+ * (ppp_crc16_table), but I don't want this code dependent on PPP
-+ */
-+
-+// static 
-+__u16 fcstab[256] =
-+{
-+	0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
-+	0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
-+	0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
-+	0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
-+	0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
-+	0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
-+	0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
-+	0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
-+	0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
-+	0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
-+	0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
-+	0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
-+	0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
-+	0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
-+	0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
-+	0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
-+	0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
-+	0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
-+	0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
-+	0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
-+	0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
-+	0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
-+	0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
-+	0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
-+	0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
-+	0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
-+	0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
-+	0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
-+	0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
-+	0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
-+	0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
-+	0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-+};
-+
-+#define HDLC_ZERO_SEARCH 0
-+#define HDLC_FLAG_SEARCH 1
-+#define HDLC_FLAG_FOUND  2
-+#define HDLC_FRAME_FOUND 3
-+#define HDLC_NULL 4
-+#define HDLC_PART 5
-+#define HDLC_FULL 6
-+
-+#define HDLC_FLAG_VALUE	0x7e
-+
-+
-+#define MAKE_RAW_BYTE for (j=0; j<8; j++) { \
-+			bitcnt++;\
-+			out_val >>= 1;\
-+			if (val & 1) {\
-+				s_one++;\
-+				out_val |= 0x80;\
-+			} else {\
-+				s_one = 0;\
-+				out_val &= 0x7f;\
-+			}\
-+			if (bitcnt==8) {\
-+				if (d_cnt == dsize) return 0;\
-+				dst[d_cnt++] = out_val;\
-+				bitcnt = 0;\
-+			}\
-+			if (s_one == 5) {\
-+				out_val >>= 1;\
-+				out_val &= 0x7f;\
-+				bitcnt++;\
-+				s_one = 0;\
-+			}\
-+			if (bitcnt==8) {\
-+				if (d_cnt == dsize) return 0;\
-+				dst[d_cnt++] = out_val;\
-+				bitcnt = 0;\
-+			}\
-+			val >>= 1;\
-+		}
-+
-+/* Optimization suggestion: If needed, this function could be
-+ * dramatically sped up using a state machine.  Each state would
-+ * correspond to having seen N one bits, and being offset M bits into
-+ * the current output byte.  N ranges from 0 to 4, M from 0 to 7, so
-+ * we need 5*8 = 35 states.  Each state would have a table with 256
-+ * entries, one for each input character.  Each entry would contain
-+ * three output characters, an output state, an a byte increment
-+ * that's either 1 or 2.  All this could fit in four bytes; so we need
-+ * 4 bytes * 256 characters = 1 KB for each state (35 KB total).  Zero
-+ * the output buffer before you start.  For each character in your
-+ * input, you look it up in the current state's table and get three
-+ * bytes to be or'ed into the output at the current byte offset, and
-+ * an byte increment to move your pointer forward.  A simple Perl
-+ * script could generate the tables.  Given HDLC semantics, probably
-+ * would be better to set output to all 1s, then use ands instead of ors.
-+ * A smaller state machine could operate on nibbles instead of bytes.
-+ * A state machine for 32-bit architectures could use word offsets
-+ * instead of byte offsets, requiring 5*32 = 160 states; probably
-+ * best to work on nibbles in such a case.
-+ */
-+
-+
-+int make_raw_hdlc_data(u_char *src, u_int slen, u_char *dst, u_int dsize)
-+{
-+	register u_int i,d_cnt=0;
-+	register u_char j;
-+	register u_char val;
-+	register u_char s_one = 0;
-+	register u_char out_val = 0;
-+	register u_char bitcnt = 0;
-+	u_int fcs;
-+	
-+	
-+	dst[d_cnt++] = HDLC_FLAG_VALUE;
-+	fcs = PPP_INITFCS;
-+	for (i=0; i<slen; i++) {
-+		val = src[i];
-+		fcs = PPP_FCS (fcs, val);
-+		MAKE_RAW_BYTE;
-+	}
-+	fcs ^= 0xffff;
-+	val = fcs & 0xff;
-+	MAKE_RAW_BYTE;
-+	val = (fcs>>8) & 0xff;
-+	MAKE_RAW_BYTE;
-+	val = HDLC_FLAG_VALUE;
-+	for (j=0; j<8; j++) { 
-+		bitcnt++;
-+		out_val >>= 1;
-+		if (val & 1)
-+			out_val |= 0x80;
-+		else
-+			out_val &= 0x7f;
-+		if (bitcnt==8) {
-+			if (d_cnt == dsize) return 0;
-+			dst[d_cnt++] = out_val;
-+			bitcnt = 0;
-+		}
-+		val >>= 1;
-+	}
-+	if (bitcnt) {
-+		while (8>bitcnt++) {
-+			out_val >>= 1;
-+			out_val |= 0x80;
-+		}
-+		if (d_cnt == dsize) return 0;
-+		dst[d_cnt++] = out_val;
-+	}
-+
-+	return d_cnt;
-+}
-+
-+void init_hdlc_state(struct hdlc_state *stateptr, int mode)
-+{
-+	stateptr->state = HDLC_ZERO_SEARCH;
-+	stateptr->r_one = 0;
-+	stateptr->r_val = 0;
-+	stateptr->o_bitcnt = 0;
-+	stateptr->i_bitcnt = 0;
-+	stateptr->insane_mode = mode;
-+}
-+
-+/* Optimization suggestion: A similar state machine could surely
-+ * be developed for this function as well.
-+ */
-+
-+int read_raw_hdlc_data(struct hdlc_state *saved_state,
-+                       u_char *src, u_int slen, u_char *dst, u_int dsize)
-+{
-+	int retval=0;
-+	register u_char val;
-+	register u_char state = saved_state->state;
-+	register u_char r_one = saved_state->r_one;
-+	register u_char r_val = saved_state->r_val;
-+	register u_int o_bitcnt = saved_state->o_bitcnt;
-+	register u_int i_bitcnt = saved_state->i_bitcnt;
-+	register u_int fcs    = saved_state->fcs;
-+	register u_int *isrc = (u_int *) src;
-+        
-+	/* Use i_bitcnt (bit offset into source buffer) to reload "val"
-+	 * in case we're starting up again partway through a source buffer
-+	 */
-+
-+	if ((i_bitcnt >> 3) < slen) {
-+		if (saved_state->insane_mode==1) {
-+			val = isrc[(i_bitcnt >> 3)] & 0xff;
-+		} else if (saved_state->insane_mode==2) {
-+			val = (isrc[i_bitcnt >> 3] >>8) & 0xff;
-+		} else {
-+			val = src[i_bitcnt >> 3];
-+		}
-+		val >>= i_bitcnt & 7;
-+	}
-+
-+	/* One bit per loop.  Keep going until we've got something to
-+	 * report (retval != 0), or we exhaust the source buffer
-+	 */
-+
-+	while ((retval == 0) && ((i_bitcnt >> 3) < slen)) {
-+		if ((i_bitcnt & 7) == 0) {
-+			if (saved_state->insane_mode==1) {
-+				val = isrc[(i_bitcnt >> 3)] & 0xff;
-+			} else if (saved_state->insane_mode==2) {
-+				val = (isrc[i_bitcnt >> 3] >>8) & 0xff;
-+			} else {
-+				val = src[i_bitcnt >> 3];
-+			}
-+#ifdef DEBUGME
-+			printf("Input byte %d: 0x%2x\n", i_bitcnt>>3, val);
-+#endif
-+			if (val == 0xff) {
-+				state = HDLC_ZERO_SEARCH;
-+				o_bitcnt = 0;
-+				r_one = 0;
-+				i_bitcnt += 8;
-+				continue;
-+			}
-+		}
-+
-+#ifdef DEBUGME
-+		/* printf("Data bit=%d (%d/%d)\n", val&1, i_bitcnt>>3, i_bitcnt&7);*/
-+#endif
-+
-+		if (state == HDLC_ZERO_SEARCH) {
-+			if (val & 1) {
-+				r_one++;
-+			} else {
-+				r_one=0;
-+				state= HDLC_FLAG_SEARCH;
-+			}
-+		} else if (state == HDLC_FLAG_SEARCH) { 
-+			if (val & 1) {
-+				r_one++;
-+				if (r_one>6) {
-+					state=HDLC_ZERO_SEARCH;
-+				}
-+			} else {
-+				if (r_one==6) {
-+					o_bitcnt=0;
-+					r_val=0;
-+					state=HDLC_FLAG_FOUND;
-+				}
-+				r_one=0;
-+			}
-+		} else if (state ==  HDLC_FLAG_FOUND) {
-+			if (val & 1) {
-+				r_one++;
-+				if (r_one>6) {
-+					state=HDLC_ZERO_SEARCH;
-+				} else {
-+					r_val >>= 1;
-+					r_val |= 0x80;
-+					o_bitcnt++;
-+				}
-+			} else {
-+				if (r_one==6) {
-+					o_bitcnt=0;
-+					r_val=0;
-+					r_one=0;
-+					i_bitcnt++;
-+					val >>= 1;
-+					continue;
-+				} else if (r_one!=5) {
-+					r_val >>= 1;
-+					r_val &= 0x7f;
-+					o_bitcnt++;
-+				}
-+				r_one=0;	
-+			}
-+			if ((state != HDLC_ZERO_SEARCH) &&
-+				!(o_bitcnt & 7)) {
-+#ifdef DEBUGME
-+				printf("HDLC_FRAME_FOUND at i_bitcnt:%d\n",i_bitcnt);
-+#endif
-+				state=HDLC_FRAME_FOUND;
-+				fcs = PPP_INITFCS;
-+				dst[0] = r_val;
-+				fcs = PPP_FCS (fcs, r_val);
-+			}
-+		} else if (state ==  HDLC_FRAME_FOUND) {
-+			if (val & 1) {
-+				r_one++;
-+				if (r_one>6) {
-+					state=HDLC_ZERO_SEARCH;
-+					o_bitcnt=0;
-+				} else {
-+					r_val >>= 1;
-+					r_val |= 0x80;
-+					o_bitcnt++;
-+				}
-+			} else {
-+				if (r_one==6) {
-+					r_val=0; 
-+					r_one=0;
-+					o_bitcnt++;
-+					if (o_bitcnt & 7) {
-+						/* Alignment error */
-+#ifdef DEBUGME
-+						printf("Alignment error\n");
-+#endif
-+						state=HDLC_FLAG_SEARCH;
-+						retval = -1;
-+					} else if (fcs==PPP_GOODFCS) {
-+						/* Valid frame */
-+						state=HDLC_FLAG_FOUND;
-+						retval = (o_bitcnt>>3)-3;
-+					} else {
-+						/* CRC error */
-+#ifdef DEBUGME
-+						printf("CRC error; fcs was 0x%x, should have been 0x%x\n", fcs, PPP_GOODFCS);
-+#endif
-+						state=HDLC_FLAG_FOUND;
-+						retval = -1;
-+					}
-+				} else if (r_one==5) {
-+					r_one=0;
-+					i_bitcnt++;
-+					val >>= 1;
-+					continue;
-+				} else {
-+					r_val >>= 1;
-+					r_val &= 0x7f;
-+					o_bitcnt++;
-+				}
-+				r_one=0;	
-+			}
-+			if ((state == HDLC_FRAME_FOUND) &&
-+				!(o_bitcnt & 7)) {
-+				if ((o_bitcnt>>3)>=dsize) {
-+					/* Buffer overflow error */
-+#ifdef DEBUGME
-+					printf("Buffer overflow error\n");
-+#endif
-+					r_val=0; 
-+					state=HDLC_FLAG_SEARCH;
-+					retval = -1;
-+				} else {
-+					dst[(o_bitcnt>>3)-1] = r_val;
-+					fcs = PPP_FCS (fcs, r_val);
-+#ifdef DEBUGME
-+					printf("Output byte %d: 0x%02x; FCS 0x%04x\n", (o_bitcnt>>3)-1, r_val, fcs);
-+#endif
-+				}
-+			}
-+		}
-+		i_bitcnt ++;
-+		val >>= 1;
-+	}
-+
-+	/* We exhausted the source buffer before anything else happened
-+	 * (retval==0).  Reset i_bitcnt in expectation of a new source
-+	 * buffer.  Other, we either had an error or a valid frame, so
-+	 * reset o_bitcnt in expectation of a new destination buffer.
-+	 */
-+
-+	if (retval == 0) {
-+		i_bitcnt = 0;
-+	} else {
-+		o_bitcnt = 0;
-+	}
-+
-+	saved_state->state = state;
-+	saved_state->r_one = r_one;
-+	saved_state->r_val = r_val;
-+	saved_state->fcs = fcs;
-+	saved_state->o_bitcnt = o_bitcnt;
-+	saved_state->i_bitcnt = i_bitcnt;
-+
-+	return (retval);
-+}
-+
-+
-+
-+#ifdef DEBUGME
-+
-+char buffer[1024];
-+char obuffer[1024];
-+
-+main()
-+{
-+  int buflen=0;
-+  int len;
-+  struct hdlc_state hdlc_state;
-+
-+  while((buffer[buflen] = getc(stdin)) != EOF && buflen<1024) buflen++;
-+
-+  printf("buflen = %d\n", buflen);
-+
-+  init_hdlc_state(&hdlc_state, 0);
-+
-+  while (len = read_raw_hdlc_data(&hdlc_state,buffer,buflen,obuffer,1024)) {
-+    if (len == -1) printf("Error @ byte %d/bit %d\n",
-+			  hdlc_state.i_bitcnt>>3, hdlc_state.i_bitcnt & 7);
-+    else {
-+      printf("Frame received: len %d\n", len);
-+    }
-+  }
-+
-+  printf("Done\n");
-+}
-+
-+#endif
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/rawhdlc.h linux-2.4.29/drivers/isdn/hisax/rawhdlc.h
---- linux-2.4.29.old/drivers/isdn/hisax/rawhdlc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/rawhdlc.h	2005-03-22 15:06:48.076784000 +0100
-@@ -0,0 +1,28 @@
-+/* $Id: rawhdlc.h,v 1.5 2001/09/24 13:22:57 kai Exp $
-+ *
-+ * Author     Brent Baccala
-+ * Copyright  by Brent Baccala <baccala@FreeSoft.org>
-+ *
-+ * This software may be used and distributed according to the terms
-+ * of the GNU General Public License, incorporated herein by reference.
-+ *
-+ */
-+
-+#ifndef RAWHDLC_H
-+struct hdlc_state {
-+	char insane_mode;
-+	u_char state;
-+	u_char r_one;
-+	u_char r_val;
-+	u_int o_bitcnt;
-+	u_int i_bitcnt;
-+	u_int fcs;
-+};
-+
-+
-+int make_raw_hdlc_data(u_char *src, u_int slen, u_char *dst, u_int dsize);
-+void init_hdlc_state(struct hdlc_state *stateptr, int mode);
-+int read_raw_hdlc_data(struct hdlc_state *saved_state,
-+                       u_char *src, u_int slen, u_char *dst, u_int dsize);
-+#define RAWHDLC_H
-+#endif
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/s0box.c linux-2.4.29/drivers/isdn/hisax/s0box.c
---- linux-2.4.29.old/drivers/isdn/hisax/s0box.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/s0box.c	2005-03-22 15:06:48.092781568 +0100
-@@ -1,4 +1,4 @@
--/* $Id: s0box.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: s0box.c,v 2.6 2001/09/24 13:22:57 kai Exp $
-  *
-  * low level stuff for Creatix S0BOX
-  *
-@@ -18,7 +18,7 @@
- #include "isdnl1.h"
- 
- extern const char *CardType[];
--const char *s0box_revision = "$Revision: 1.1.4.1 $";
-+const char *s0box_revision = "$Revision: 2.6 $";
- 
- static inline void
- writereg(unsigned int padr, signed int addr, u_char off, u_char val) {
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/saphir.c linux-2.4.29/drivers/isdn/hisax/saphir.c
---- linux-2.4.29.old/drivers/isdn/hisax/saphir.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/saphir.c	2005-03-22 15:06:48.107779288 +0100
-@@ -1,4 +1,4 @@
--/* $Id: saphir.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: saphir.c,v 1.10 2001/09/24 13:22:57 kai Exp $
-  *
-  * low level stuff for HST Saphir 1
-  *
-@@ -20,7 +20,7 @@
- #include "isdnl1.h"
- 
- extern const char *CardType[];
--static char *saphir_rev = "$Revision: 1.1.4.1 $";
-+static char *saphir_rev = "$Revision: 1.10 $";
- 
- #define byteout(addr,val) outb(val,addr)
- #define bytein(addr) inb(addr)
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/sedlbauer.c linux-2.4.29/drivers/isdn/hisax/sedlbauer.c
---- linux-2.4.29.old/drivers/isdn/hisax/sedlbauer.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/sedlbauer.c	2005-03-22 15:06:48.123776856 +0100
-@@ -1,4 +1,4 @@
--/* $Id: sedlbauer.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: sedlbauer.c,v 1.34 2002/02/09 21:00:57 keil Exp $
-  *
-  * low level stuff for Sedlbauer cards
-  * includes support for the Sedlbauer speed star (speed star II),
-@@ -48,18 +48,19 @@
- #include "isar.h"
- #include "isdnl1.h"
- #include <linux/pci.h>
--#include <linux/isapnp.h>
-+#include <linux/isdn_compat.h>
- 
- extern const char *CardType[];
- 
--const char *Sedlbauer_revision = "$Revision: 1.1.4.1 $";
-+const char *Sedlbauer_revision = "$Revision: 1.34 $";
- 
- const char *Sedlbauer_Types[] =
- 	{"None", "speed card/win", "speed star", "speed fax+",
- 	"speed win II / ISDN PC/104", "speed star II", "speed pci",
--	"speed fax+ pyramid", "speed fax+ pci"};
-+	"speed fax+ pyramid", "speed fax+ pci", "HST Saphir III"};
- 
- #define PCI_SUBVENDOR_SPEEDFAX_PYRAMID	0x51
-+#define PCI_SUBVENDOR_HST_SAPHIR3	0x52
- #define PCI_SUBVENDOR_SEDLBAUER_PCI	0x53
- #define PCI_SUBVENDOR_SPEEDFAX_PCI	0x54
- #define PCI_SUB_ID_SEDLBAUER		0x01
-@@ -72,6 +73,7 @@
- #define SEDL_SPEED_PCI   	6
- #define SEDL_SPEEDFAX_PYRAMID	7
- #define SEDL_SPEEDFAX_PCI	8
-+#define HST_SAPHIR3		9
- 
- #define SEDL_CHIP_TEST		0
- #define SEDL_CHIP_ISAC_HSCX	1
-@@ -531,21 +533,6 @@
- 
- static struct pci_dev *dev_sedl __devinitdata = NULL;
- 
--#ifdef __ISAPNP__
--static struct isapnp_device_id sedl_ids[] __initdata = {
--	{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
--	  ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01), 
--	  (unsigned long) "Speed win" },
--	{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
--	  ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02), 
--	  (unsigned long) "Speed Fax+" },
--	{ 0, }
--};
--
--static struct isapnp_device_id *pdev = &sedl_ids[0];
--static struct pci_bus *pnp_c __devinitdata = NULL;
--#endif
--
- int __devinit
- setup_sedlbauer(struct IsdnCard *card)
- {
-@@ -581,57 +568,6 @@
- 			bytecnt = 16;
- 		}
- 	} else {
--#ifdef __ISAPNP__
--		if (isapnp_present()) {
--			struct pci_bus *pb;
--			struct pci_dev *pd;
--
--			while(pdev->card_vendor) {
--				if ((pb = isapnp_find_card(pdev->card_vendor,
--					pdev->card_device, pnp_c))) {
--					pnp_c = pb;
--					pd = NULL;
--					if ((pd = isapnp_find_dev(pnp_c,
--						pdev->vendor, pdev->function, pd))) {
--						printk(KERN_INFO "HiSax: %s detected\n",
--							(char *)pdev->driver_data);
--						pd->prepare(pd);
--						pd->deactivate(pd);
--						pd->activate(pd);
--						card->para[1] =
--							pd->resource[0].start;
--						card->para[0] =
--							pd->irq_resource[0].start;
--						if (!card->para[0] || !card->para[1]) {
--							printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
--								card->para[0], card->para[1]);
--							pd->deactivate(pd);
--							return(0);
--						}
--						cs->hw.sedl.cfg_reg = card->para[1];
--						cs->irq = card->para[0];
--						if (pdev->function == ISAPNP_FUNCTION(0x2)) {
--							cs->subtyp = SEDL_SPEED_FAX;
--							cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
--							bytecnt = 16;
--						} else {
--							cs->subtyp = SEDL_SPEED_CARD_WIN;
--							cs->hw.sedl.chip = SEDL_CHIP_TEST;
--						}
--						goto ready;
--					} else {
--						printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
--						return(0);
--					}
--				}
--				pdev++;
--				pnp_c=NULL;
--			} 
--			if (!pdev->card_vendor) {
--				printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
--			}
--		}
--#endif
- /* Probe for Sedlbauer speed pci */
- #if CONFIG_PCI
- 		if (!pci_present()) {
-@@ -647,15 +583,15 @@
- 				printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
- 				return(0);
- 			}
--			cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
-+			cs->hw.sedl.cfg_reg = pci_resource_start_io(dev_sedl, 0);
- 		} else {
- 			printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
- 			return(0);
- 		}
- 		cs->irq_flags |= SA_SHIRQ;
- 		cs->hw.sedl.bus = SEDL_BUS_PCI;
--		sub_vendor_id = dev_sedl->subsystem_vendor;
--		sub_id = dev_sedl->subsystem_device;
-+		pci_get_sub_vendor(dev_sedl,sub_vendor_id);
-+		pci_get_sub_system(dev_sedl,sub_id);
- 		printk(KERN_INFO "Sedlbauer: PCI subvendor:%x subid %x\n",
- 			sub_vendor_id, sub_id);
- 		printk(KERN_INFO "Sedlbauer: PCI base adr %#x\n",
-@@ -670,6 +606,9 @@
- 		} else if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PCI) {
- 			cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
- 			cs->subtyp = SEDL_SPEEDFAX_PCI;
-+		} else if (sub_vendor_id == PCI_SUBVENDOR_HST_SAPHIR3) {
-+			cs->hw.sedl.chip = SEDL_CHIP_IPAC;
-+			cs->subtyp = HST_SAPHIR3;
- 		} else if (sub_vendor_id == PCI_SUBVENDOR_SEDLBAUER_PCI) {
- 			cs->hw.sedl.chip = SEDL_CHIP_IPAC;
- 			cs->subtyp = SEDL_SPEED_PCI;
-@@ -683,8 +622,8 @@
- 		cs->hw.sedl.reset_off = SEDL_ISAR_PCI_ISAR_RESET_OFF;
- 		byteout(cs->hw.sedl.cfg_reg, 0xff);
- 		byteout(cs->hw.sedl.cfg_reg, 0x00);
--		byteout(cs->hw.sedl.cfg_reg+ 2, 0xdd);
--		byteout(cs->hw.sedl.cfg_reg+ 5, 0x02);
-+		byteout(cs->hw.sedl.cfg_reg +2, 0xdd);
-+		byteout(cs->hw.sedl.cfg_reg +5, 0x02);
- 		byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
- 		save_flags(flags);
- 		sti();
-@@ -697,7 +636,7 @@
- 		return (0);
- #endif /* CONFIG_PCI */
- 	}	
--ready:	
-+	
- 	/* In case of the sedlbauer pcmcia card, this region is in use,
- 	 * reserved for us by the card manager. So we do not check it
- 	 * here, it would fail.
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/sportster.c linux-2.4.29/drivers/isdn/hisax/sportster.c
---- linux-2.4.29.old/drivers/isdn/hisax/sportster.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/sportster.c	2005-03-22 15:06:48.169769864 +0100
-@@ -1,4 +1,4 @@
--/* $Id: sportster.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: sportster.c,v 1.16 2001/09/24 13:22:57 kai Exp $
-  *
-  * low level stuff for USR Sportster internal TA
-  *
-@@ -20,7 +20,7 @@
- #include "isdnl1.h"
- 
- extern const char *CardType[];
--const char *sportster_revision = "$Revision: 1.1.4.1 $";
-+const char *sportster_revision = "$Revision: 1.16 $";
- 
- #define byteout(addr,val) outb(val,addr)
- #define bytein(addr) inb(addr)
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/st5481-debug.h linux-2.4.29/drivers/isdn/hisax/st5481-debug.h
---- linux-2.4.29.old/drivers/isdn/hisax/st5481-debug.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/st5481-debug.h	2005-03-22 15:06:48.184767584 +0100
-@@ -0,0 +1,103 @@
-+#define ST5481_DEBUG 0x0
-+
-+#if ST5481_DEBUG
-+
-+
-+/*
-+  DEBUG flags. Set compile option  ST5481_DEBUG with the following bits set to trace
-+  the given subsections:
-+
-+  0x01:  USB
-+  0x02:  D
-+  0x04:  B
-+  0x08:  PH
-+  0x10:  PACKET_DUMP D out
-+  0x20:  ISO_DUMP D out
-+  0x40:  PACKET_DUMP D in
-+  0x80:  ISO_DUMP in
-+  0x100: PACKET_DUMP B out
-+  0x200: ISO_DUMP B out
-+  0x400: PACKET_DUMP B in
-+*/
-+
-+#define DBG(level, format, arg...) \
-+if (level &  ST5481_DEBUG) \
-+printk(KERN_DEBUG __FUNCTION__ ": " format "\n" , ## arg) \
-+
-+static inline void 
-+dump_packet(const char *name,const u_char *data,int pkt_len)
-+{
-+#define DUMP_HDR_SIZE 200
-+#define DUMP_TLR_SIZE 8
-+	if (pkt_len) {
-+		int i,len1,len2;
-+
-+		printk(KERN_DEBUG "%s: length=%d,data=",name,pkt_len);
-+
-+		if (pkt_len >  DUMP_HDR_SIZE+ DUMP_TLR_SIZE) {
-+			len1 = DUMP_HDR_SIZE;
-+			len2 = DUMP_TLR_SIZE;
-+		} else {
-+			len1 = pkt_len > DUMP_HDR_SIZE ? DUMP_HDR_SIZE : pkt_len;
-+			len2 = 0;			
-+		}
-+		for (i = 0; i < len1; ++i) {
-+		 	printk ("%.2x", data[i]);
-+		}
-+		if (len2) {
-+		 	printk ("..");
-+			for (i = pkt_len-DUMP_TLR_SIZE; i < pkt_len; ++i) {
-+				printk ("%.2x", data[i]);
-+			}
-+		}
-+		printk ("\n");
-+	}
-+#undef DUMP_HDR_SIZE
-+#undef DUMP_TLR_SIZE
-+}
-+
-+static inline void 
-+dump_iso_packet(const char *name,urb_t *urb)
-+{
-+	int i,j;
-+	int len,ofs;
-+	u_char *data;
-+
-+	printk(KERN_DEBUG "%s: packets=%d,errors=%d\n",
-+	       name,urb->number_of_packets,urb->error_count);
-+	for (i = 0; i  < urb->number_of_packets; ++i) {
-+		if (urb->pipe & USB_DIR_IN) {
-+			len = urb->iso_frame_desc[i].actual_length;
-+		} else {
-+			len = urb->iso_frame_desc[i].length;
-+		}
-+		ofs = urb->iso_frame_desc[i].offset;
-+		printk(KERN_DEBUG "len=%.2d,ofs=%.3d ",len,ofs);
-+		if (len) {
-+			data = urb->transfer_buffer+ofs;
-+			for (j=0; j < len; j++) {
-+				printk ("%.2x", data[j]);
-+			}
-+		}
-+		printk("\n");
-+	}
-+}
-+
-+#define DUMP_PACKET(level,data,count) \
-+  if (level & ST5481_DEBUG) dump_packet(__FUNCTION__,data,count)
-+#define DUMP_SKB(level,skb) \
-+  if ((level & ST5481_DEBUG) && skb) dump_packet(__FUNCTION__,skb->data,skb->len)
-+#define DUMP_ISO_PACKET(level,urb) \
-+  if (level & ST5481_DEBUG) dump_iso_packet(__FUNCTION__,urb)
-+
-+#else
-+
-+#define DBG(level,format, arg...) do {} while (0)
-+#define DUMP_PACKET(level,data,count) do {} while (0)
-+#define DUMP_SKB(level,skb) do {} while (0)
-+#define DUMP_ISO_PACKET(level,urb) do {} while (0)
-+
-+#endif
-+
-+
-+
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/st5481.h linux-2.4.29/drivers/isdn/hisax/st5481.h
---- linux-2.4.29.old/drivers/isdn/hisax/st5481.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/st5481.h	2005-03-22 15:06:48.201765000 +0100
-@@ -219,15 +219,15 @@
- #define L1_EVENT_COUNT (EV_TIMER3 + 1)
- 
- #define ERR(format, arg...) \
--printk(KERN_ERR "%s:%s: " format "\n" , __FILE__,  __FUNCTION__ , ## arg)
-+printk(KERN_ERR __FILE__ ": " __FUNCTION__ ": " format "\n" , ## arg)
- 
- #define WARN(format, arg...) \
--printk(KERN_WARNING "%s:%s: " format "\n" , __FILE__,  __FUNCTION__ , ## arg)
-+printk(KERN_WARNING __FILE__ ": " __FUNCTION__ ": " format "\n" , ## arg)
- 
- #define INFO(format, arg...) \
--printk(KERN_INFO "%s:%s: " format "\n" , __FILE__,  __FUNCTION__ , ## arg)
-+printk(KERN_INFO __FILE__ ": " __FUNCTION__ ": " format "\n" , ## arg)
- 
--#include "isdnhdlc.h"
-+#include "st5481_hdlc.h"
- #include "fsm.h"
- #include "hisax_if.h"
- #include <linux/skbuff.h>
-@@ -236,7 +236,7 @@
-  * FIFO handling
-  */
- 
--/* Generic FIFO structure */
-+/* Generic FIFO structure */ 
- struct fifo {
- 	u_char r,w,count,size;
- 	spinlock_t lock;
-@@ -270,7 +270,7 @@
- 		index = -1;
- 	} else {
- 		// Return index where to get the next data to add to the FIFO
--		index = fifo->w++ & (fifo->size-1);
-+		index = fifo->w++ & (fifo->size-1); 
- 		fifo->count++;
- 	}
- 	spin_unlock_irqrestore(&fifo->lock, flags);
-@@ -289,13 +289,13 @@
- 		return -1;
- 	}
- 
--	spin_lock_irqsave(&fifo->lock, flags);
-+	spin_lock_irqsave(&fifo->lock, flags);		
- 	if (!fifo->count) {
- 		// FIFO empty
- 		index = -1;
- 	} else {
- 		// Return index where to get the next data from the FIFO
--		index = fifo->r++ & (fifo->size-1);
-+		index = fifo->r++ & (fifo->size-1); 
- 		fifo->count--;
- 	}
- 	spin_unlock_irqrestore(&fifo->lock, flags);
-@@ -309,7 +309,7 @@
- typedef void (*ctrl_complete_t)(void *);
- 
- typedef struct ctrl_msg {
--	struct usb_ctrlrequest dr;
-+	devrequest dr;
- 	ctrl_complete_t complete;
- 	void *context;
- } ctrl_msg; 
-@@ -336,7 +336,7 @@
- };
- 
- struct st5481_d_out {
--	struct isdnhdlc_vars hdlc_state;
-+	struct hdlc_vars hdlc_state;
- 	struct urb *urb[2]; /* double buffering */
- 	unsigned long busy;
- 	struct sk_buff *tx_skb;
-@@ -344,7 +344,7 @@
- };
- 
- struct st5481_b_out {
--	struct isdnhdlc_vars hdlc_state;
-+	struct hdlc_vars hdlc_state;
- 	struct urb *urb[2]; /* double buffering */
- 	u_char flow_event;
- 	u_long busy;
-@@ -352,7 +352,7 @@
- };
- 
- struct st5481_in {
--	struct isdnhdlc_vars hdlc_state;
-+	struct hdlc_vars hdlc_state;
- 	struct urb *urb[2]; /* double buffering */
- 	int mode;
- 	int bufsize;
-@@ -478,7 +478,7 @@
-   if (level & __debug_variable) dump_iso_packet(__FUNCTION__,urb)
- 
- static void __attribute__((unused))
--dump_iso_packet(const char *name,struct urb *urb)
-+dump_iso_packet(const char *name,urb_t *urb)
- {
- 	int i,j;
- 	int len,ofs;
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/st5481_b.c linux-2.4.29/drivers/isdn/hisax/st5481_b.c
---- linux-2.4.29.old/drivers/isdn/hisax/st5481_b.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/st5481_b.c	2005-03-22 15:06:48.216762720 +0100
-@@ -67,28 +67,24 @@
- 				bytes_sent = buf_size - len;
- 				if (skb->len < bytes_sent)
- 					bytes_sent = skb->len;
--				{	/* swap tx bytes to get hearable audio data */
--					register unsigned char *src  = skb->data;
--					register unsigned char *dest = urb->transfer_buffer+len;
--					register unsigned int count;
--					for (count = 0; count < bytes_sent; count++)
--						*dest++ = isdnhdlc_bit_rev_tab[*src++];
--				}
-+
-+				memcpy(urb->transfer_buffer+len, skb->data, bytes_sent);
-+				
- 				len += bytes_sent;
- 			} else {
--				len += isdnhdlc_encode(&b_out->hdlc_state,
--						       skb->data, skb->len, &bytes_sent,
--						       urb->transfer_buffer+len, buf_size-len);
-+				len += hdlc_encode(&b_out->hdlc_state, 
-+						   skb->data, skb->len, &bytes_sent,
-+						   urb->transfer_buffer+len, buf_size-len);
- 			}
- 
- 			skb_pull(skb, bytes_sent);
--
-+			
- 			if (!skb->len) {
- 				// Frame sent
- 				b_out->tx_skb = NULL;
- 				B_L1L2(bcs, PH_DATA | CONFIRM, (void *) skb->truesize);
- 				dev_kfree_skb_any(skb);
--
-+				
- /* 				if (!(bcs->tx_skb = skb_dequeue(&bcs->sq))) { */
- /* 					st5481B_sched_event(bcs, B_XMTBUFREADY); */
- /* 				} */
-@@ -99,9 +95,9 @@
- 				len = buf_size;
- 			} else {
- 				// Send flags
--				len += isdnhdlc_encode(&b_out->hdlc_state,
--						       NULL, 0, &bytes_sent,
--						       urb->transfer_buffer+len, buf_size-len);
-+				len += hdlc_encode(&b_out->hdlc_state, 
-+						   NULL, 0, &bytes_sent,
-+						   urb->transfer_buffer+len, buf_size-len);
- 			}
- 		}	
- 	}
-@@ -213,7 +209,7 @@
- 	if (bcs->mode != L1_MODE_NULL) {
- 		// Open the B channel
- 		if (bcs->mode != L1_MODE_TRANS) {
--			isdnhdlc_out_init(&b_out->hdlc_state, 0, bcs->mode == L1_MODE_HDLC_56K);
-+			hdlc_out_init(&b_out->hdlc_state, 0, bcs->mode == L1_MODE_HDLC_56K);
- 		}
- 		st5481_usb_pipe_reset(adapter, (bcs->channel+1)*2, NULL, NULL);
- 	
-@@ -279,7 +275,7 @@
- 				      usb_b_out_complete, bcs);
- }
- 
--static void st5481_release_b_out(struct st5481_bcs *bcs)
-+static void __devexit st5481_release_b_out(struct st5481_bcs *bcs)
- {
- 	struct st5481_b_out *b_out = &bcs->b_out;
- 
-@@ -320,7 +316,7 @@
- /*
-  * Release buffers and URBs for the B channels
-  */
--void st5481_release_b(struct st5481_bcs *bcs)
-+void __devexit st5481_release_b(struct st5481_bcs *bcs)
- {
- 	DBG(4,"");
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/st5481_d.c linux-2.4.29/drivers/isdn/hisax/st5481_d.c
---- linux-2.4.29.old/drivers/isdn/hisax/st5481_d.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/st5481_d.c	2005-03-22 15:06:48.231760440 +0100
-@@ -162,8 +162,8 @@
- 	{ST_L1_F8, EV_TIMER3,            l1_timer3},
- 	{ST_L1_F8, EV_IND_DP,            l1_go_f3},
- 	{ST_L1_F8, EV_IND_AP,            l1_go_f6},
--	{ST_L1_F8, EV_IND_AI8,           l1_go_f7},
--	{ST_L1_F8, EV_IND_AI10,          l1_go_f7},
-+	{ST_L1_F8, EV_IND_AI8,           l1_go_f8},
-+	{ST_L1_F8, EV_IND_AI10,          l1_go_f8},
- 	{ST_L1_F8, EV_IND_RSY,           l1_ignore},
- };
- 
-@@ -297,7 +297,7 @@
- 	unsigned int num_packets, packet_offset;
- 	int len, buf_size, bytes_sent;
- 	struct sk_buff *skb;
--	struct iso_packet_descriptor *desc;
-+	iso_packet_descriptor_t *desc;
- 
- 	if (d_out->fsm.state != ST_DOUT_NORMAL)
- 		return;
-@@ -313,15 +313,15 @@
- 	buf_size = NUM_ISO_PACKETS_D * SIZE_ISO_PACKETS_D_OUT;
- 	
- 	if (skb) {
--		len = isdnhdlc_encode(&d_out->hdlc_state,
--				      skb->data, skb->len, &bytes_sent,
--				      urb->transfer_buffer, buf_size);
-+		len = hdlc_encode(&d_out->hdlc_state, 
-+				  skb->data, skb->len, &bytes_sent,
-+				  urb->transfer_buffer, buf_size);
- 		skb_pull(skb,bytes_sent);
- 	} else {
- 		// Send flags or idle
--		len = isdnhdlc_encode(&d_out->hdlc_state,
--				      NULL, 0, &bytes_sent,
--				      urb->transfer_buffer, buf_size);
-+		len = hdlc_encode(&d_out->hdlc_state, 
-+				  NULL, 0, &bytes_sent,
-+				  urb->transfer_buffer, buf_size);
- 	}
- 	
- 	if (len < buf_size) {
-@@ -413,7 +413,7 @@
- 
- 	DBG(2,"len=%d",skb->len);
- 
--	isdnhdlc_out_init(&d_out->hdlc_state, 1, 0);
-+	hdlc_out_init(&d_out->hdlc_state, 1, 0);
- 
- 	if (test_and_set_bit(buf_nr, &d_out->busy)) {
- 		WARN("ep %d urb %d busy %#lx", EP_D_OUT, buf_nr, d_out->busy);
-@@ -422,9 +422,9 @@
- 	urb = d_out->urb[buf_nr];
- 
- 	DBG_SKB(0x10, skb);
--	len = isdnhdlc_encode(&d_out->hdlc_state,
--			      skb->data, skb->len, &bytes_sent,
--			      urb->transfer_buffer, 16);
-+	len = hdlc_encode(&d_out->hdlc_state, 
-+			  skb->data, skb->len, &bytes_sent,
-+			  urb->transfer_buffer, 16);
- 	skb_pull(skb, bytes_sent);
- 
- 	if(len < 16)
-@@ -673,7 +673,7 @@
- 				      usb_d_out_complete, adapter);
- }
- 
--static void st5481_release_d_out(struct st5481_adapter *adapter)
-+static void __devexit st5481_release_d_out(struct st5481_adapter *adapter)
- {
- 	struct st5481_d_out *d_out = &adapter->d_out;
- 
-@@ -723,7 +723,7 @@
- 	return retval;
- }
- 
--void st5481_release_d(struct st5481_adapter *adapter)
-+void __devexit st5481_release_d(struct st5481_adapter *adapter)
- {
- 	DBG(2,"");
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/st5481_init.c linux-2.4.29/drivers/isdn/hisax/st5481_init.c
---- linux-2.4.29.old/drivers/isdn/hisax/st5481_init.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/st5481_init.c	2005-03-22 15:06:48.268754816 +0100
-@@ -14,6 +14,7 @@
-  * TODO:
-  *
-  * b layer1 delay?
-+ * hdlc as module
-  * hotplug / unregister issues
-  * mod_inc/dec_use_count
-  * unify parts of d/b channel usb handling
-@@ -177,7 +178,7 @@
- static struct usb_driver st5481_usb_driver = {
- 	name: "st5481_usb",
- 	probe: probe_st5481,
--	disconnect: __devexit_p(disconnect_st5481),
-+	disconnect: disconnect_st5481,
- 	id_table: st5481_ids,
- };
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/st5481_usb.c linux-2.4.29/drivers/isdn/hisax/st5481_usb.c
---- linux-2.4.29.old/drivers/isdn/hisax/st5481_usb.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/st5481_usb.c	2005-03-22 15:06:48.284752384 +0100
-@@ -41,9 +41,9 @@
- 		(unsigned char *)&ctrl->msg_fifo.data[r_index];
- 	
- 	DBG(1,"request=0x%02x,value=0x%04x,index=%x",
--	    ((struct ctrl_msg *)urb->setup_packet)->dr.bRequest,
--	    ((struct ctrl_msg *)urb->setup_packet)->dr.wValue,
--	    ((struct ctrl_msg *)urb->setup_packet)->dr.wIndex);
-+	    ((struct ctrl_msg *)urb->setup_packet)->dr.request,
-+	    ((struct ctrl_msg *)urb->setup_packet)->dr.value,
-+	    ((struct ctrl_msg *)urb->setup_packet)->dr.index);
- 
- 	// Prepare the URB
- 	urb->dev = adapter->usb_dev;
-@@ -69,11 +69,11 @@
- 	}
- 	ctrl_msg = &ctrl->msg_fifo.data[w_index]; 
-    
--	ctrl_msg->dr.bRequestType = requesttype;
--	ctrl_msg->dr.bRequest = request;
--	ctrl_msg->dr.wValue = cpu_to_le16p(&value);
--	ctrl_msg->dr.wIndex = cpu_to_le16p(&index);
--	ctrl_msg->dr.wLength = 0;
-+	ctrl_msg->dr.requesttype = requesttype;
-+	ctrl_msg->dr.request = request;
-+	ctrl_msg->dr.value = cpu_to_le16p(&value);
-+	ctrl_msg->dr.index = cpu_to_le16p(&index);
-+	ctrl_msg->dr.length = 0;
- 	ctrl_msg->complete = complete;
- 	ctrl_msg->context = context;
- 
-@@ -140,17 +140,17 @@
- 
- 	ctrl_msg = (struct ctrl_msg *)urb->setup_packet;
- 	
--	if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) {
-+	if (ctrl_msg->dr.request == USB_REQ_CLEAR_FEATURE) {
- 	        /* Special case handling for pipe reset */
--		le16_to_cpus(&ctrl_msg->dr.wIndex);
-+		le16_to_cpus(&ctrl_msg->dr.index);
- 		usb_endpoint_running(adapter->usb_dev,
--				     ctrl_msg->dr.wIndex & ~USB_DIR_IN, 
--				     (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0);
-+				     ctrl_msg->dr.index & ~USB_DIR_IN, 
-+				     (ctrl_msg->dr.index & USB_DIR_IN) == 0);
- 
- 		/* toggle is reset on clear */
- 		usb_settoggle(adapter->usb_dev, 
--			      ctrl_msg->dr.wIndex & ~USB_DIR_IN, 
--			      (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0,
-+			      ctrl_msg->dr.index & ~USB_DIR_IN, 
-+			      (ctrl_msg->dr.index & USB_DIR_IN) == 0,
- 			      0);
- 
- 
-@@ -235,7 +235,7 @@
- 	struct usb_interface_descriptor *altsetting;
- 	struct usb_endpoint_descriptor *endpoint;
- 	int status;
--	struct urb *urb;
-+	urb_t *urb;
- 	u_char *buf;
- 	
- 	DBG(1,"");
-@@ -307,7 +307,7 @@
-  * Release buffers and URBs for the interrupt and control
-  * endpoint.
-  */
--void st5481_release_usb(struct st5481_adapter *adapter)
-+void __devexit st5481_release_usb(struct st5481_adapter *adapter)
- {
- 	struct st5481_intr *intr = &adapter->intr;
- 	struct st5481_ctrl *ctrl = &adapter->ctrl;
-@@ -443,7 +443,7 @@
- 	return retval;
- }
- 
--void st5481_release_isocpipes(struct urb* urb[2])
-+void __devexit st5481_release_isocpipes(struct urb* urb[2])
- {
- 	int j;
- 
-@@ -484,18 +484,16 @@
- 	ptr = urb->transfer_buffer;
- 	while (len > 0) {
- 		if (in->mode == L1_MODE_TRANS) {
--			/* swap rx bytes to get hearable audio */
--			register unsigned char *dest = in->rcvbuf;
-+			memcpy(in->rcvbuf, ptr, len);
- 			status = len;
--			for (; len; len--)
--				*dest++ = isdnhdlc_bit_rev_tab[*ptr++];
-+			len = 0;
- 		} else {
--			status = isdnhdlc_decode(&in->hdlc_state, ptr, len, &count,
--					         in->rcvbuf, in->bufsize);
-+			status = hdlc_decode(&in->hdlc_state, ptr, len, &count,
-+					     in->rcvbuf, in->bufsize);
- 			ptr += count;
- 			len -= count;
- 		}
--
-+		
- 		if (status > 0) {
- 			// Good frame received
- 			DBG(4,"count=%d",status);
-@@ -549,7 +547,7 @@
- 	return retval;
- }
- 
--void st5481_release_in(struct st5481_in *in)
-+void __devexit st5481_release_in(struct st5481_in *in)
- {
- 	DBG(2,"");
- 
-@@ -562,8 +560,7 @@
-  */
- int st5481_isoc_flatten(struct urb *urb)
- {
--	struct iso_packet_descriptor *pipd;
--	struct iso_packet_descriptor *pend;
-+	piso_packet_descriptor_t pipd,pend;
- 	unsigned char *src,*dst;
- 	unsigned int len;
- 	
-@@ -624,10 +621,15 @@
- 
- 	if (in->mode != L1_MODE_NULL) {
- 		if (in->mode != L1_MODE_TRANS)
--			isdnhdlc_rcv_init(&in->hdlc_state,
--				          in->mode == L1_MODE_HDLC_56K);
-+			hdlc_rcv_init(&in->hdlc_state,
-+				      in->mode == L1_MODE_HDLC_56K);
- 		
- 		st5481_usb_pipe_reset(in->adapter, in->ep, NULL, NULL);
-+#if 0
-+		st5481_usb_device_ctrl_msg(in->adapter, in->counter,
-+					   in->packet_size,
-+					   st5481_start_rcv, in);
-+#endif
- 		st5481_usb_device_ctrl_msg(in->adapter, in->counter,
- 					   in->packet_size,
- 					   NULL, NULL);
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/tei.c linux-2.4.29/drivers/isdn/hisax/tei.c
---- linux-2.4.29.old/drivers/isdn/hisax/tei.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/tei.c	2005-03-22 15:06:48.316747520 +0100
-@@ -1,4 +1,4 @@
--/* $Id: tei.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: tei.c,v 2.20 2001/09/24 13:22:57 kai Exp $
-  *
-  * Author       Karsten Keil
-  *              based on the teles driver from Jan den Ouden
-@@ -21,7 +21,7 @@
- #include <linux/init.h>
- #include <linux/random.h>
- 
--const char *tei_revision = "$Revision: 1.1.4.1 $";
-+const char *tei_revision = "$Revision: 2.20 $";
- 
- #define ID_REQUEST	1
- #define ID_ASSIGNED	2
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/teleint.c linux-2.4.29/drivers/isdn/hisax/teleint.c
---- linux-2.4.29.old/drivers/isdn/hisax/teleint.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/teleint.c	2005-03-22 15:06:48.330745392 +0100
-@@ -1,4 +1,4 @@
--/* $Id: teleint.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: teleint.c,v 1.16 2001/09/24 13:22:57 kai Exp $
-  *
-  * low level stuff for TeleInt isdn cards
-  *
-@@ -19,7 +19,7 @@
- 
- extern const char *CardType[];
- 
--const char *TeleInt_revision = "$Revision: 1.1.4.1 $";
-+const char *TeleInt_revision = "$Revision: 1.16 $";
- 
- #define byteout(addr,val) outb(val,addr)
- #define bytein(addr) inb(addr)
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/teles0.c linux-2.4.29/drivers/isdn/hisax/teles0.c
---- linux-2.4.29.old/drivers/isdn/hisax/teles0.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/teles0.c	2005-03-22 15:06:48.348742656 +0100
-@@ -1,4 +1,4 @@
--/* $Id: teles0.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: teles0.c,v 2.15 2001/09/24 13:22:57 kai Exp $
-  *
-  * low level stuff for Teles Memory IO isdn cards
-  *
-@@ -24,7 +24,7 @@
- 
- extern const char *CardType[];
- 
--const char *teles0_revision = "$Revision: 1.1.4.1 $";
-+const char *teles0_revision = "$Revision: 2.15 $";
- 
- #define TELES_IOMEM_SIZE	0x400
- #define byteout(addr,val) outb(val,addr)
-@@ -189,8 +189,10 @@
- {
- 	if (cs->hw.teles0.cfg_reg)
- 		release_region(cs->hw.teles0.cfg_reg, 8);
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 	iounmap((unsigned char *)cs->hw.teles0.membase);
- 	release_mem_region(cs->hw.teles0.phymem, TELES_IOMEM_SIZE);
-+#endif
- }
- 
- static int
-@@ -327,6 +329,7 @@
- 	/* 16.0 and 8.0 designed for IOM1 */
- 	test_and_set_bit(HW_IOM1, &cs->HW_Flags);
- 	cs->hw.teles0.phymem = card->para[1];
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 	if (check_mem_region(cs->hw.teles0.phymem, TELES_IOMEM_SIZE)) {
- 		printk(KERN_WARNING
- 			"HiSax: %s memory region %lx-%lx already in use\n",
-@@ -342,6 +345,9 @@
- 	}
- 	cs->hw.teles0.membase =
- 		(unsigned long) ioremap(cs->hw.teles0.phymem, TELES_IOMEM_SIZE);
-+#else
-+	cs->hw.teles0.membase = cs->hw.teles0.phymem;
-+#endif
- 	printk(KERN_INFO
- 	       "HiSax: %s config irq:%d mem:0x%lX cfg:0x%X\n",
- 	       CardType[cs->typ], cs->irq,
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/teles3.c linux-2.4.29/drivers/isdn/hisax/teles3.c
---- linux-2.4.29.old/drivers/isdn/hisax/teles3.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/teles3.c	2005-03-22 15:06:48.367739768 +0100
-@@ -1,4 +1,4 @@
--/* $Id: teles3.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: teles3.c,v 2.19 2001/09/24 13:22:57 kai Exp $
-  *
-  * low level stuff for Teles 16.3 & PNP isdn cards
-  *
-@@ -15,14 +15,13 @@
-  */
- #define __NO_VERSION__
- #include <linux/init.h>
--#include <linux/isapnp.h>
- #include "hisax.h"
- #include "isac.h"
- #include "hscx.h"
- #include "isdnl1.h"
- 
- extern const char *CardType[];
--const char *teles3_revision = "$Revision: 1.1.4.1 $";
-+const char *teles3_revision = "$Revision: 2.19 $";
- 
- #define byteout(addr,val) outb(val,addr)
- #define bytein(addr) inb(addr)
-@@ -255,24 +254,6 @@
- 	return(0);
- }
- 
--#ifdef __ISAPNP__
--static struct isapnp_device_id teles_ids[] __initdata = {
--	{ ISAPNP_VENDOR('T', 'A', 'G'), ISAPNP_FUNCTION(0x2110),
--	  ISAPNP_VENDOR('T', 'A', 'G'), ISAPNP_FUNCTION(0x2110), 
--	  (unsigned long) "Teles 16.3 PnP" },
--	{ ISAPNP_VENDOR('C', 'T', 'X'), ISAPNP_FUNCTION(0x0),
--	  ISAPNP_VENDOR('C', 'T', 'X'), ISAPNP_FUNCTION(0x0), 
--	  (unsigned long) "Creatix 16.3 PnP" },
--	{ ISAPNP_VENDOR('C', 'P', 'Q'), ISAPNP_FUNCTION(0x1002),
--	  ISAPNP_VENDOR('C', 'P', 'Q'), ISAPNP_FUNCTION(0x1002), 
--	  (unsigned long) "Compaq ISDN S0" },
--	{ 0, }
--};
--
--static struct isapnp_device_id *tdev = &teles_ids[0];
--static struct pci_bus *pnp_c __devinitdata = NULL;
--#endif
--
- int __devinit
- setup_teles3(struct IsdnCard *card)
- {
-@@ -286,47 +267,6 @@
- 	    && (cs->typ != ISDN_CTYPE_TELESPCMCIA) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA))
- 		return (0);
- 
--#ifdef __ISAPNP__
--	if (!card->para[1] && isapnp_present()) {
--		struct pci_bus *pb;
--		struct pci_dev *pd;
--
--		while(tdev->card_vendor) {
--			if ((pb = isapnp_find_card(tdev->card_vendor,
--				tdev->card_device, pnp_c))) {
--				pnp_c = pb;
--				pd = NULL;
--				if ((pd = isapnp_find_dev(pnp_c,
--					tdev->vendor, tdev->function, pd))) {
--					printk(KERN_INFO "HiSax: %s detected\n",
--						(char *)tdev->driver_data);
--					pd->prepare(pd);
--					pd->deactivate(pd);
--					pd->activate(pd);
--					card->para[3] = pd->resource[2].start;
--					card->para[2] = pd->resource[1].start;
--					card->para[1] = pd->resource[0].start;
--					card->para[0] = pd->irq_resource[0].start;
--					if (!card->para[0] || !card->para[1] || !card->para[2]) {
--						printk(KERN_ERR "Teles PnP:some resources are missing %ld/%lx/%lx\n",
--						card->para[0], card->para[1], card->para[2]);
--						pd->deactivate(pd);
--						return(0);
--					}
--					break;
--				} else {
--					printk(KERN_ERR "Teles PnP: PnP error card found, no device\n");
--				}
--			}
--			tdev++;
--			pnp_c=NULL;
--		} 
--		if (!tdev->card_vendor) {
--			printk(KERN_INFO "Teles PnP: no ISAPnP card found\n");
--			return(0);
--		}
--	}
--#endif
- 	if (cs->typ == ISDN_CTYPE_16_3) {
- 		cs->hw.teles3.cfg_reg = card->para[1];
- 		switch (cs->hw.teles3.cfg_reg) {
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/telespci.c linux-2.4.29/drivers/isdn/hisax/telespci.c
---- linux-2.4.29.old/drivers/isdn/hisax/telespci.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/telespci.c	2005-03-22 15:06:48.382737488 +0100
-@@ -1,4 +1,4 @@
--/* $Id: telespci.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: telespci.c,v 2.23 2001/09/24 13:22:57 kai Exp $
-  *
-  * low level stuff for Teles PCI isdn cards
-  *
-@@ -20,9 +20,10 @@
- #include "hscx.h"
- #include "isdnl1.h"
- #include <linux/pci.h>
-+#include <linux/isdn_compat.h>
- 
- extern const char *CardType[];
--const char *telespci_revision = "$Revision: 1.1.4.1 $";
-+const char *telespci_revision = "$Revision: 2.23 $";
- 
- #define ZORAN_PO_RQ_PEN	0x02000000
- #define ZORAN_PO_WR	0x00800000
-@@ -307,10 +308,10 @@
- 			printk(KERN_WARNING "Teles: No IRQ for PCI card found\n");
- 			return(0);
- 		}
--		cs->hw.teles0.membase = (u_long) ioremap(pci_resource_start(dev_tel, 0),
-+		cs->hw.teles0.membase = (u_long) ioremap(pci_resource_start_mem(dev_tel, 0),
- 			PAGE_SIZE);
- 		printk(KERN_INFO "Found: Zoran, base-address: 0x%lx, irq: 0x%x\n",
--			pci_resource_start(dev_tel, 0), dev_tel->irq);
-+			pci_resource_start_mem(dev_tel, 0), dev_tel->irq);
- 	} else {
- 		printk(KERN_WARNING "TelesPCI: No PCI card found\n");
- 		return(0);
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/w6692.c linux-2.4.29/drivers/isdn/hisax/w6692.c
---- linux-2.4.29.old/drivers/isdn/hisax/w6692.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/w6692.c	2005-03-22 15:06:48.398735056 +0100
-@@ -1,4 +1,4 @@
--/* $Id: w6692.c,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: w6692.c,v 1.18 2001/09/24 13:22:57 kai Exp $
-  *
-  * Winbond W6692 specific routines
-  *
-@@ -18,6 +18,7 @@
- #include "isdnl1.h"
- #include <linux/interrupt.h>
- #include <linux/pci.h>
-+#include <linux/isdn_compat.h>
- 
- /* table entry in the PCI devices list */
- typedef struct {
-@@ -29,20 +30,14 @@
- 
- static const PCI_ENTRY id_list[] =
- {
--	{PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_6692, "Winbond", "W6692"},
- 	{PCI_VENDOR_ID_DYNALINK, PCI_DEVICE_ID_DYNALINK_IS64PH, "Dynalink/AsusCom", "IS64PH"},
--	{0, 0, "U.S.Robotics", "ISDN PCI Card TA"}
-+	{PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_6692, "Winbond", "W6692"},
-+	{0, 0, NULL, NULL}
- };
- 
--#define W6692_SV_USR   0x16ec
--#define W6692_SD_USR   0x3409
--#define W6692_WINBOND  0
--#define W6692_DYNALINK 1
--#define W6692_USR      2
--
- extern const char *CardType[];
- 
--const char *w6692_revision = "$Revision: 1.1.4.1 $";
-+const char *w6692_revision = "$Revision: 1.18 $";
- 
- #define DBUSY_TIMER_VALUE 80
- 
-@@ -675,6 +670,16 @@
- static void
- DC_Close_W6692(struct IsdnCardState *cs)
- {
-+#if 0
-+	if (cs->dc.w6692.mon_rx) {
-+		kfree(cs->dc.w6692.mon_rx);
-+		cs->dc.w6692.mon_rx = NULL;
-+	}
-+	if (cs->dc.w6692.mon_tx) {
-+		kfree(cs->dc.w6692.mon_tx);
-+		cs->dc.w6692.mon_tx = NULL;
-+	}
-+#endif
- }
- 
- static void
-@@ -865,38 +870,31 @@
- 	return (0);
- }
- 
--void resetW6692(struct IsdnCardState *cs)
--{
--	cs->writeW6692(cs, W_D_CTL, W_D_CTL_SRST);
--	schedule_timeout((10*HZ)/1000);
--	cs->writeW6692(cs, W_D_CTL, 0x00);
--	schedule_timeout((10*HZ)/1000);
--	cs->writeW6692(cs, W_IMASK, 0xff);
--	cs->writeW6692(cs, W_D_SAM, 0xff);
--	cs->writeW6692(cs, W_D_TAM, 0xff);
--	cs->writeW6692(cs, W_D_EXIM, 0x00);
--	cs->writeW6692(cs, W_D_MODE, W_D_MODE_RACT);
--	cs->writeW6692(cs, W_IMASK, 0x18);
--	if (cs->subtyp == W6692_USR) {
--		/* seems that USR implemented some power control features
--		 * Pin 79 is connected to the oscilator circuit so we
--		 * have to handle it here
--		 */
--		cs->writeW6692(cs, W_PCTL, 0x80);
--		cs->writeW6692(cs, W_XDATA, 0x00);
--	}
--}
--
- void __init initW6692(struct IsdnCardState *cs, int part)
- {
- 	if (part & 1) {
- 		cs->tqueue.routine = (void *) (void *) W6692_bh;
- 		cs->setstack_d = setstack_W6692;
- 		cs->DC_Close = DC_Close_W6692;
-+#if 0
-+		cs->dc.w6692.mon_tx = NULL;
-+		cs->dc.w6692.mon_rx = NULL;
-+#endif
- 		cs->dbusytimer.function = (void *) dbusy_timer_handler;
- 		cs->dbusytimer.data = (long) cs;
- 		init_timer(&cs->dbusytimer);
--		resetW6692(cs);
-+
-+		cs->writeW6692(cs, W_D_CTL, W_D_CTL_SRST);
-+		cs->writeW6692(cs, W_D_CTL, 0x00);
-+		cs->writeW6692(cs, W_IMASK, 0xff);
-+#if 0
-+		cs->dc.w6692.mocr = 0xaa;
-+#endif
-+		cs->writeW6692(cs, W_D_SAM, 0xff);
-+		cs->writeW6692(cs, W_D_TAM, 0xff);
-+		cs->writeW6692(cs, W_D_EXIM, 0x00);
-+		cs->writeW6692(cs, W_D_MODE, W_D_MODE_RACT);
-+		cs->writeW6692(cs, W_IMASK, 0x18);
- 		ph_command(cs, W_L1CMD_RST);
- 		cs->dc.w6692.ph_state = W_L1CMD_RST;
- 		W6692_new_ph(cs);
-@@ -963,14 +961,9 @@
- {
- 	switch (mt) {
- 		case CARD_RESET:
--			resetW6692(cs);
- 			return (0);
- 		case CARD_RELEASE:
--			cs->writeW6692(cs, W_IMASK, 0xff);
- 			release_region(cs->hw.w6692.iobase, 256);
--			if (cs->subtyp == W6692_USR) {
--				cs->writeW6692(cs, W_XDATA, 0x04);
--			}
- 			return (0);
- 		case CARD_INIT:
- 			initW6692(cs, 3);
-@@ -1013,7 +1006,6 @@
- 		if (dev_w6692) {
- 			if (pci_enable_device(dev_w6692))
- 				continue;
--			cs->subtyp = id_idx;
- 			break;
- 		}
- 		id_idx++;
-@@ -1023,14 +1015,7 @@
- 		pci_irq = dev_w6692->irq;
- 		/* I think address 0 is allways the configuration area */
- 		/* and address 1 is the real IO space KKe 03.09.99 */
--		pci_ioaddr = pci_resource_start(dev_w6692, 1);
--		/* USR ISDN PCI card TA need some special handling */
--		if (cs->subtyp == W6692_WINBOND) {
--			if ((W6692_SV_USR == dev_w6692->subsystem_vendor) &&
--			    (W6692_SD_USR == dev_w6692->subsystem_device)) {
--				cs->subtyp = W6692_USR;
--			}
--		}
-+		pci_ioaddr = pci_resource_start_io(dev_w6692, 1);
- 	}
- 	if (!found) {
- 		printk(KERN_WARNING "W6692: No PCI card found\n");
-@@ -1047,18 +1032,18 @@
- 	}
- 	cs->hw.w6692.iobase = pci_ioaddr;
- 	printk(KERN_INFO "Found: %s %s, I/O base: 0x%x, irq: %d\n",
--	       id_list[cs->subtyp].vendor_name, id_list[cs->subtyp].card_name,
--	       pci_ioaddr, pci_irq);
-+	       id_list[id_idx].vendor_name, id_list[id_idx].card_name,
-+	       pci_ioaddr, dev_w6692->irq);
- 	if (check_region((cs->hw.w6692.iobase), 256)) {
- 		printk(KERN_WARNING
- 		       "HiSax: %s I/O ports %x-%x already in use\n",
--		       id_list[cs->subtyp].card_name,
-+		       id_list[id_idx].card_name,
- 		       cs->hw.w6692.iobase,
- 		       cs->hw.w6692.iobase + 255);
- 		return (0);
- 	} else {
- 		request_region(cs->hw.w6692.iobase, 256,
--			       id_list[cs->subtyp].card_name);
-+			       id_list[id_idx].card_name);
- 	}
- #else
- 	printk(KERN_WARNING "HiSax: W6692 and NO_PCI_BIOS\n");
-@@ -1068,7 +1053,7 @@
- 
- 	printk(KERN_INFO
- 	       "HiSax: %s config irq:%d I/O:%x\n",
--	       id_list[cs->subtyp].card_name, cs->irq,
-+	       id_list[id_idx].card_name, cs->irq,
- 	       cs->hw.w6692.iobase);
- 
- 	cs->readW6692 = &ReadW6692;
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/w6692.h linux-2.4.29/drivers/isdn/hisax/w6692.h
---- linux-2.4.29.old/drivers/isdn/hisax/w6692.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/w6692.h	2005-03-22 15:06:48.414732624 +0100
-@@ -1,4 +1,4 @@
--/* $Id: w6692.h,v 1.1.4.1 2001/11/20 14:19:36 kai Exp $
-+/* $Id: w6692.h,v 1.4 2001/09/24 13:22:57 kai Exp $
-  *
-  * Winbond W6692 specific defines
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hysdn/boardergo.c linux-2.4.29/drivers/isdn/hysdn/boardergo.c
---- linux-2.4.29.old/drivers/isdn/hysdn/boardergo.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hysdn/boardergo.c	2005-03-22 15:06:48.468724416 +0100
-@@ -1,27 +1,41 @@
--/* $Id: boardergo.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-- *
-+/* $Id: boardergo.c,v 1.9 2001/07/19 20:39:51 kai Exp $
-+
-  * Linux driver for HYSDN cards, specific routines for ergo type boards.
-  *
-- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
-- * Copyright 1999 by Werner Cornelius (werner@titro.de)
-- *
-- * This software may be used and distributed according to the terms
-- * of the GNU General Public License, incorporated herein by reference.
-- *
-  * As all Linux supported cards Champ2, Ergo and Metro2/4 use the same
-  * DPRAM interface and layout with only minor differences all related
-  * stuff is done here, not in separate modules.
-  *
-+ * written by Werner Cornelius (werner@titro.de) for Hypercope GmbH
-+ *
-+ * Copyright 1999  by Werner Cornelius (werner@titro.de)
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-  */
- 
-+#define __NO_VERSION__
- #include <linux/config.h>
--#include <linux/sched.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <asm/io.h>
- #include <linux/signal.h>
- #include <linux/kernel.h>
- #include <linux/ioport.h>
- #include <linux/interrupt.h>
- #include <linux/vmalloc.h>
--#include <asm/io.h>
- 
- #include "hysdn_defs.h"
- #include "boardergo.h"
-@@ -45,11 +59,10 @@
- 	if (!card->irq_enabled)
- 		return;		/* other device interrupting or irq switched off */
- 
--	save_flags(flags);
--	cli();			/* no further irqs allowed */
-+	HYSDN_SPIN_LOCK(&card->irq_lock, flags);
- 
- 	if (!(bytein(card->iobase + PCI9050_INTR_REG) & PCI9050_INTR_REG_STAT1)) {
--		restore_flags(flags);	/* restore old state */
-+		HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 		return;		/* no interrupt requested by E1 */
- 	}
- 	/* clear any pending ints on the board */
-@@ -63,7 +76,7 @@
- 		queue_task(&card->irq_queue, &tq_immediate);
- 		mark_bh(IMMEDIATE_BH);
- 	}
--	restore_flags(flags);
-+	HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- }				/* ergo_interrupt */
- 
- /******************************************************************************/
-@@ -83,17 +96,15 @@
- 		return;		/* invalid call */
- 
- 	dpr = card->dpram;	/* point to DPRAM */
-+	HYSDN_SPIN_LOCK(&card->irq_lock, flags);
- 
--	save_flags(flags);
--	cli();
- 	if (card->hw_lock) {
--		restore_flags(flags);	/* hardware currently unavailable */
-+		HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 		return;
- 	}
- 	card->hw_lock = 1;	/* we now lock the hardware */
- 
- 	do {
--		sti();		/* reenable other ints */
- 		again = 0;	/* assume loop not to be repeated */
- 
- 		if (!dpr->ToHyFlag) {
-@@ -113,15 +124,13 @@
- 				again = 1;	/* restart loop */
- 			}
- 		}		/* a message has arrived for us */
--		cli();		/* no further ints */
- 		if (again) {
- 			dpr->ToHyInt = 1;
- 			dpr->ToPcInt = 1;	/* interrupt to E1 for all cards */
- 		} else
- 			card->hw_lock = 0;	/* free hardware again */
- 	} while (again);	/* until nothing more to do */
--
--	restore_flags(flags);
-+	HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- }				/* ergo_irq_bh */
- 
- 
-@@ -138,8 +147,7 @@
- #ifdef CONFIG_HYSDN_CAPI
- 	hycapi_capi_stop(card);
- #endif /* CONFIG_HYSDN_CAPI */
--	save_flags(flags);
--	cli();
-+	HYSDN_SPIN_LOCK(&card->irq_lock, flags);
- 	val = bytein(card->iobase + PCI9050_INTR_REG);	/* get actual value */
- 	val &= ~(PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1);	/* mask irq */
- 	byteout(card->iobase + PCI9050_INTR_REG, val);
-@@ -147,8 +155,7 @@
- 	byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RESET);	/* reset E1 processor */
- 	card->state = CARD_STATE_UNUSED;
- 	card->err_log_state = ERRLOG_STATE_OFF;		/* currently no log active */
--
--	restore_flags(flags);
-+	HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- }				/* ergo_stopcard */
- 
- /**************************************************************************/
-@@ -163,20 +170,17 @@
- 		card->err_log_state = ERRLOG_STATE_OFF;		/* must be off */
- 		return;
- 	}
--	save_flags(flags);
--	cli();
--
-+	HYSDN_SPIN_LOCK(&card->irq_lock, flags);
- 	if (((card->err_log_state == ERRLOG_STATE_OFF) && !on) ||
- 	    ((card->err_log_state == ERRLOG_STATE_ON) && on)) {
--		restore_flags(flags);
-+		HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 		return;		/* nothing to do */
- 	}
- 	if (on)
- 		card->err_log_state = ERRLOG_STATE_START;	/* request start */
- 	else
- 		card->err_log_state = ERRLOG_STATE_STOP;	/* request stop */
--
--	restore_flags(flags);
-+	HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 	queue_task(&card->irq_queue, &tq_immediate);
- 	mark_bh(IMMEDIATE_BH);
- }				/* ergo_set_errlog_state */
-@@ -245,9 +249,6 @@
- 		while (!dpram->ToHyNoDpramErrLog);	/* reread volatile register to flush PCI */
- 
- 		byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN);	/* start E1 processor */
--		/* the interrupts are still masked */
--
--		sti();
- 		set_current_state(TASK_INTERRUPTIBLE);
- 		schedule_timeout((20 * HZ) / 1000);	/* Timeout 20ms */
- 
-@@ -282,7 +283,6 @@
- 	dst = sp->Data;		/* point to data in spool structure */
- 	buflen = sp->Len;	/* maximum len of spooled data */
- 	wr_mirror = sp->WrPtr;	/* only once read */
--	sti();
- 
- 	/* try until all bytes written or error */
- 	i = 0x1000;		/* timeout value */
-@@ -358,9 +358,7 @@
- 
- 			if (card->debug_flags & LOG_POF_RECORD)
- 				hysdn_addlog(card, "ERGO: pof boot success");
--			save_flags(flags);
--			cli();
--
-+			HYSDN_SPIN_LOCK(&card->irq_lock, flags);
- 			card->state = CARD_STATE_RUN;	/* now card is running */
- 			/* enable the cards interrupt */
- 			byteout(card->iobase + PCI9050_INTR_REG,
-@@ -371,8 +369,7 @@
- 			dpr->ToPcFlag = 0;	/* reset data indicator */
- 			dpr->ToHyInt = 1;
- 			dpr->ToPcInt = 1;	/* interrupt to E1 for all cards */
--
--			restore_flags(flags);
-+			HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 			if ((hynet_enable & (1 << card->myid)) 
- 			    && (i = hysdn_net_create(card))) 
- 			{
-@@ -387,7 +384,6 @@
- #endif /* CONFIG_HYSDN_CAPI */
- 			return (0);	/* success */
- 		}		/* data has arrived */
--		sti();
- 		set_current_state(TASK_INTERRUPTIBLE);
- 		schedule_timeout((50 * HZ) / 1000);	/* Timeout 50ms */
- 	}			/* wait until timeout */
-diff -rNu linux-2.4.29.old/drivers/isdn/hysdn/boardergo.h linux-2.4.29/drivers/isdn/hysdn/boardergo.h
---- linux-2.4.29.old/drivers/isdn/hysdn/boardergo.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hysdn/boardergo.h	2005-03-22 15:06:48.485721832 +0100
-@@ -1,4 +1,4 @@
--/* $Id: boardergo.h,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Linux driver for HYSDN cards, definitions for ergo type boards (buffers..).
-  *
-@@ -10,6 +10,7 @@
-  *
-  */
- 
-+#include <linux/isdn_compat.h>
- 
- /************************************************/
- /* defines for the dual port memory of the card */
-diff -rNu linux-2.4.29.old/drivers/isdn/hysdn/hycapi.c linux-2.4.29/drivers/isdn/hysdn/hycapi.c
---- linux-2.4.29.old/drivers/isdn/hysdn/hycapi.c	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hysdn/hycapi.c	2005-03-22 15:06:48.500719552 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hycapi.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Linux driver for HYSDN cards, CAPI2.0-Interface.
-  *
-@@ -29,7 +29,7 @@
- #include "hysdn_defs.h"
- #include <linux/kernelcapi.h>
- 
--static char hycapi_revision[]="$Revision: 1.1.4.1 $";
-+static char hycapi_revision[]="$Revision$";
- 
- unsigned int hycapi_enable = 0xffffffff; 
- MODULE_PARM(hycapi_enable, "i");
-diff -rNu linux-2.4.29.old/drivers/isdn/hysdn/hysdn_boot.c linux-2.4.29/drivers/isdn/hysdn/hysdn_boot.c
---- linux-2.4.29.old/drivers/isdn/hysdn/hysdn_boot.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hysdn/hysdn_boot.c	2005-03-22 15:06:48.516717120 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hysdn_boot.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Linux driver for HYSDN cards
-  * specific routines for booting and pof handling
-@@ -143,7 +143,7 @@
- 					     (boot->pof_recid == TAG_CABSDATA) ? "CABSDATA" : "ABSDATA",
- 					     datlen, boot->pof_recoffset);
- 
--			if ((boot->last_error = card->writebootseq(card, boot->buf.BootBuf, datlen)) < 0)
-+			if ((boot->last_error = card->writebootseq(card, boot->buf.BootBuf, datlen) < 0))
- 				return (boot->last_error);	/* error writing data */
- 
- 			if (boot->pof_recoffset + datlen >= boot->pof_reclen)
-diff -rNu linux-2.4.29.old/drivers/isdn/hysdn/hysdn_defs.h linux-2.4.29/drivers/isdn/hysdn/hysdn_defs.h
---- linux-2.4.29.old/drivers/isdn/hysdn/hysdn_defs.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hysdn/hysdn_defs.h	2005-03-22 15:06:48.533714536 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hysdn_defs.h,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id: hysdn_defs.h,v 1.10 2001/09/24 13:23:03 kai Exp $
-  *
-  * Linux driver for HYSDN cards
-  * global definitions and exported vars and functions.
-@@ -19,6 +19,11 @@
- #include <linux/interrupt.h>
- #include <linux/tqueue.h>
- #include <linux/skbuff.h>
-+#include <linux/isdn_compat.h>
-+#include <linux/spinlock.h>
-+
-+#define HYSDN_SPIN_LOCK(a,b) spin_lock(a)
-+#define HYSDN_SPIN_UNLOCK(a,b) spin_unlock(a)
- 
- /****************************/
- /* storage type definitions */
-@@ -176,6 +181,7 @@
- 	struct tq_struct irq_queue;	/* interrupt task queue */
- 	uchar volatile irq_enabled;	/* interrupt enabled if != 0 */
- 	uchar volatile hw_lock;	/* hardware is currently locked -> no access */
-+	spinlock_t irq_lock;
- 
- 	/* boot process */
- 	void *boot;		/* pointer to boot private data */
-diff -rNu linux-2.4.29.old/drivers/isdn/hysdn/hysdn_init.c linux-2.4.29/drivers/isdn/hysdn/hysdn_init.c
---- linux-2.4.29.old/drivers/isdn/hysdn/hysdn_init.c	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hysdn/hysdn_init.c	2005-03-22 15:06:48.551711800 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hysdn_init.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Linux driver for HYSDN cards, init functions.
-  *
-@@ -21,6 +21,7 @@
- 
- #include "hysdn_defs.h"
- 
-+#ifndef COMPAT_HAS_2_2_PCI
- static struct pci_device_id hysdn_pci_tbl[] __initdata = {
- 	{PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX, PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_METRO},
- 	{PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX, PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2},
-@@ -29,11 +30,12 @@
- 	{ }				/* Terminating entry */
- };
- MODULE_DEVICE_TABLE(pci, hysdn_pci_tbl);
-+#endif
- MODULE_DESCRIPTION("ISDN4Linux: Driver for HYSDN cards");
- MODULE_AUTHOR("Werner Cornelius");
- MODULE_LICENSE("GPL");
- 
--static char *hysdn_init_revision = "$Revision: 1.1.4.1 $";
-+static char *hysdn_init_revision = "$Revision$";
- int cardmax;			/* number of found cards */
- hysdn_card *card_root = NULL;	/* pointer to first card */
- 
-@@ -91,11 +93,11 @@
- 		card->myid = cardmax;	/* set own id */
- 		card->bus = akt_pcidev->bus->number;
- 		card->devfn = akt_pcidev->devfn;	/* slot + function */
--		card->subsysid = akt_pcidev->subsystem_device;
-+		pci_get_sub_system(akt_pcidev,card->subsysid);
- 		card->irq = akt_pcidev->irq;
--		card->iobase = pci_resource_start(akt_pcidev, PCI_REG_PLX_IO_BASE);
--		card->plxbase = pci_resource_start(akt_pcidev, PCI_REG_PLX_MEM_BASE);
--		card->membase = pci_resource_start(akt_pcidev, PCI_REG_MEMORY_BASE);
-+		card->iobase = pci_resource_start_io(akt_pcidev, PCI_REG_PLX_IO_BASE);
-+		card->plxbase = pci_resource_start_mem(akt_pcidev, PCI_REG_PLX_MEM_BASE);
-+		card->membase = pci_resource_start_mem(akt_pcidev, PCI_REG_MEMORY_BASE);
- 		card->brdtype = BD_NONE;	/* unknown */
- 		card->debug_flags = DEF_DEB_FLAGS;	/* set default debug */
- 		card->faxchans = 0;	/* default no fax channels */
-diff -rNu linux-2.4.29.old/drivers/isdn/hysdn/hysdn_net.c linux-2.4.29/drivers/isdn/hysdn/hysdn_net.c
---- linux-2.4.29.old/drivers/isdn/hysdn/hysdn_net.c	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hysdn/hysdn_net.c	2005-03-22 15:06:48.567709368 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hysdn_net.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Linux driver for HYSDN cards, net (ethernet type) handling routines.
-  *
-@@ -29,7 +29,7 @@
- MODULE_PARM(hynet_enable, "i");
- 
- /* store the actual version for log reporting */
--char *hysdn_net_revision = "$Revision: 1.1.4.1 $";
-+char *hysdn_net_revision = "$Revision$";
- 
- #define MAX_SKB_BUFFERS 20	/* number of buffers for keeping TX-data */
- 
-@@ -45,6 +45,10 @@
- 	/* additional vars may be added here */
- 	char dev_name[9];	/* our own device name */
- 
-+#ifdef COMPAT_NO_SOFTNET
-+	struct sk_buff *tx_skb;	/* buffer for tx operation */
-+
-+#else
- 	/* Tx control lock.  This protects the transmit buffer ring
- 	 * state along with the "tx full" state of the driver.  This
- 	 * means all netif_queue flow control actions are protected
-@@ -56,6 +60,7 @@
- 	int sk_count;		/* number of buffers currently in ring */
- 
- 	int is_open;		/* flag controlling module locking */
-+#endif
- };				/* net_local */
- 
- 
-@@ -83,11 +88,19 @@
- 	hysdn_card *card = dev->priv;
- 	int i;
- 
-+#ifdef COMPAT_NO_SOFTNET
-+	dev->tbusy = 0;		/* non busy state */
-+	dev->interrupt = 0;
-+	if (!dev->start)
-+		MOD_INC_USE_COUNT;	/* increment only if device is down */
-+	dev->start = 1;		/* and started */
-+#else
- 	if (!((struct net_local *) dev)->is_open)
- 		MOD_INC_USE_COUNT;	/* increment only if interface is actually down */
- 	((struct net_local *) dev)->is_open = 1;	/* device actually open */
- 
- 	netif_start_queue(dev);	/* start tx-queueing */
-+#endif
- 
- 	/* Fill in the MAC-level header (if not already set) */
- 	if (!card->mac_addr[0]) {
-@@ -104,6 +117,7 @@
- 	return (0);
- }				/* net_open */
- 
-+#ifndef COMPAT_NO_SOFTNET
- /*******************************************/
- /* flush the currently occupied tx-buffers */
- /* must only be called when device closed  */
-@@ -119,6 +133,7 @@
- 		nl->sk_count--;
- 	}
- }				/* flush_tx_buffers */
-+#endif
- 
- 
- /*********************************************************************/
-@@ -129,6 +144,15 @@
- net_close(struct net_device *dev)
- {
- 
-+#ifdef COMPAT_NO_SOFTNET
-+	dev->tbusy = 1;		/* we are busy */
-+
-+	if (dev->start)
-+		MOD_DEC_USE_COUNT;	/* dec only if device has been active */
-+
-+	dev->start = 0;		/* and not started */
-+
-+#else
- 	netif_stop_queue(dev);	/* disable queueing */
- 
- 	if (((struct net_local *) dev)->is_open)
-@@ -136,9 +160,52 @@
- 	((struct net_local *) dev)->is_open = 0;
- 	flush_tx_buffers((struct net_local *) dev);
- 
-+#endif
- 	return (0);		/* success */
- }				/* net_close */
- 
-+#ifdef COMPAT_NO_SOFTNET
-+/************************************/
-+/* send a packet on this interface. */
-+/* only for kernel versions < 2.3.33 */
-+/************************************/
-+static int
-+net_send_packet(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct net_local *lp = (struct net_local *) dev;
-+
-+	if (dev->tbusy) {
-+		/*
-+		 * If we get here, some higher level has decided we are broken.
-+		 * There should really be a "kick me" function call instead.
-+		 * As ISDN may have higher timeouts than real ethernet 10s timeout
-+		 */
-+		int tickssofar = jiffies - dev->trans_start;
-+		if (tickssofar < (10000 * HZ) / 1000)
-+			return 1;
-+		printk(KERN_WARNING "%s: transmit timed out. \n", dev->name);
-+		dev->tbusy = 0;
-+		dev->trans_start = jiffies;
-+	}
-+	/*
-+	 * Block a timer-based transmit from overlapping. This could better be
-+	 * done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
-+	 */
-+	if (test_and_set_bit(0, (void *) &dev->tbusy) != 0)
-+		printk(KERN_WARNING "%s: Transmitter access conflict.\n", dev->name);
-+
-+	else {
-+		lp->stats.tx_bytes += skb->len;
-+		dev->trans_start = jiffies;
-+		lp->tx_skb = skb;	/* remember skb pointer */
-+		queue_task(&((hysdn_card *) dev->priv)->irq_queue, &tq_immediate);
-+		mark_bh(IMMEDIATE_BH);
-+	}
-+
-+	return (0);		/* success */
-+}				/* net_send_packet */
-+
-+#else
- /************************************/
- /* send a packet on this interface. */
- /* new style for kernel >= 2.3.33   */
-@@ -176,6 +243,7 @@
- 	return (0);		/* success */
- }				/* net_send_packet */
- 
-+#endif
- 
- 
- /***********************************************************************/
-@@ -190,6 +258,15 @@
- 	if (!lp)
- 		return;		/* non existing device */
- 
-+#ifdef COMPAT_NO_SOFTNET
-+	if (lp->tx_skb)
-+		dev_kfree_skb(lp->tx_skb);	/* free tx pointer */
-+	lp->tx_skb = NULL;	/* reset pointer */
-+
-+	lp->stats.tx_packets++;
-+	lp->netdev.tbusy = 0;
-+	mark_bh(NET_BH);	/* Inform upper layers. */
-+#else
- 
- 	if (!lp->sk_count)
- 		return;		/* error condition */
-@@ -203,6 +280,7 @@
- 
- 	if (lp->sk_count-- == MAX_SKB_BUFFERS)	/* dec usage count */
- 		netif_start_queue((struct net_device *) lp);
-+#endif
- }				/* hysdn_tx_netack */
- 
- /*****************************************************/
-@@ -250,10 +328,15 @@
- 	if (!lp)
- 		return (NULL);	/* non existing device */
- 
-+#ifdef COMPAT_NO_SOFTNET
-+	return (lp->tx_skb);	/* return packet pointer */
-+
-+#else
- 	if (!lp->sk_count)
- 		return (NULL);	/* nothing available */
- 
- 	return (lp->skbs[lp->out_idx]);		/* next packet to send */
-+#endif
- }				/* hysdn_tx_netget */
- 
- 
-@@ -296,15 +379,21 @@
- 	}
- 	memset(dev, 0, sizeof(struct net_local));	/* clean the structure */
- 
-+#ifndef COMPAT_NO_SOFTNET
- 	spin_lock_init(&((struct net_local *) dev)->lock);
-+#endif
- 
- 	/* initialise necessary or informing fields */
- 	dev->base_addr = card->iobase;	/* IO address */
- 	dev->irq = card->irq;	/* irq */
- 	dev->init = net_init;	/* the init function of the device */
-+#ifdef COMPAT_NO_SOFTNET
-+	dev->name = ((struct net_local *) dev)->dev_name;	/* device name */
-+#else
- 	if(dev->name) {
- 		strcpy(dev->name, ((struct net_local *) dev)->dev_name);
- 	} 
-+#endif
- 	if ((i = register_netdev(dev))) {
- 		printk(KERN_WARNING "HYSDN: unable to create network device\n");
- 		kfree(dev);
-@@ -333,7 +422,9 @@
- 	card->netif = NULL;	/* clear out pointer */
- 	dev->stop(dev);		/* close the device */
- 
-+#ifndef COMPAT_NO_SOFTNET
- 	flush_tx_buffers((struct net_local *) dev);	/* empty buffers */
-+#endif
- 
- 	unregister_netdev(dev);	/* release the device */
- 	kfree(dev);		/* release the memory allocated */
-diff -rNu linux-2.4.29.old/drivers/isdn/hysdn/hysdn_pof.h linux-2.4.29/drivers/isdn/hysdn/hysdn_pof.h
---- linux-2.4.29.old/drivers/isdn/hysdn/hysdn_pof.h	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hysdn/hysdn_pof.h	2005-03-22 15:06:48.583706936 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hysdn_pof.h,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Linux driver for HYSDN cards, definitions used for handling pof-files.
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/hysdn/hysdn_procconf.c linux-2.4.29/drivers/isdn/hysdn/hysdn_procconf.c
---- linux-2.4.29.old/drivers/isdn/hysdn/hysdn_procconf.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hysdn/hysdn_procconf.c	2005-03-22 15:06:48.598704656 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hysdn_procconf.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Linux driver for HYSDN cards, /proc/net filesystem dir and conf functions.
-  *
-@@ -17,11 +17,13 @@
- #include <linux/poll.h>
- #include <linux/proc_fs.h>
- #include <linux/pci.h>
-+#ifndef COMPAT_USE_MODCOUNT_LOCK
- #include <linux/smp_lock.h>
-+#endif
- 
- #include "hysdn_defs.h"
- 
--static char *hysdn_procconf_revision = "$Revision: 1.1.4.1 $";
-+static char *hysdn_procconf_revision = "$Revision$";
- 
- #define INFO_OUT_LEN 80		/* length of info line including lf */
- 
-@@ -212,32 +214,29 @@
- static ssize_t
- hysdn_conf_read(struct file *file, char *buf, size_t count, loff_t * off)
- {
--	loff_t pos = *off;
- 	char *cp;
- 	int i;
- 
- 	if (off != &file->f_pos)	/* fs error check */
- 		return -ESPIPE;
- 
--	if (!(file->f_mode & FMODE_READ))
--		return -EPERM;
--
--	if (!(cp = file->private_data))
--		return (-EFAULT);	/* should never happen */
--
--	i = strlen(cp);	/* get total string length */
--
--	if (pos != (unsigned)pos || pos >= i)
--		return 0;
--
--	/* still bytes to transfer */
--	cp += pos;	/* point to desired data offset */
--	i -= pos;	/* remaining length */
--	if (i > count)
--		i = count;	/* limit length to transfer */
--	if (copy_to_user(buf, cp, i))
--		return (-EFAULT);	/* copy error */
--	*off = pos + i;	/* adjust offset */
-+	if (file->f_mode & FMODE_READ) {
-+		if (!(cp = file->private_data))
-+			return (-EFAULT);	/* should never happen */
-+		i = strlen(cp);	/* get total string length */
-+		if (*off < i) {
-+			/* still bytes to transfer */
-+			cp += *off;	/* point to desired data offset */
-+			i -= *off;	/* remaining length */
-+			if (i > count)
-+				i = count;	/* limit length to transfer */
-+			if (copy_to_user(buf, cp, i))
-+				return (-EFAULT);	/* copy error */
-+			*off += i;	/* adjust offset */
-+		} else
-+			return (0);
-+	} else
-+		return (-EPERM);	/* no permission to read */
- 
- 	return (i);
- }				/* hysdn_conf_read */
-@@ -254,7 +253,11 @@
- 	char *cp, *tmp;
- 
- 	/* now search the addressed card */
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+	MOD_INC_USE_COUNT;
-+#else
- 	lock_kernel();
-+#endif
- 	card = card_root;
- 	while (card) {
- 		pd = card->procconf;
-@@ -263,7 +266,11 @@
- 		card = card->next;	/* search next entry */
- 	}
- 	if (!card) {
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+		MOD_DEC_USE_COUNT;
-+#else
- 		unlock_kernel();
-+#endif
- 		return (-ENODEV);	/* device is unknown/invalid */
- 	}
- 	if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
-@@ -274,7 +281,11 @@
- 		/* write only access -> write boot file or conf line */
- 
- 		if (!(cnf = kmalloc(sizeof(struct conf_writedata), GFP_KERNEL))) {
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+			MOD_DEC_USE_COUNT;
-+#else
- 			unlock_kernel();
-+#endif
- 			return (-EFAULT);
- 		}
- 		cnf->card = card;
-@@ -286,7 +297,11 @@
- 		/* read access -> output card info data */
- 
- 		if (!(tmp = (char *) kmalloc(INFO_OUT_LEN * 2 + 2, GFP_KERNEL))) {
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+			MOD_DEC_USE_COUNT;
-+#else
- 			unlock_kernel();
-+#endif
- 			return (-EFAULT);	/* out of memory */
- 		}
- 		filep->private_data = tmp;	/* start of string */
-@@ -320,10 +335,16 @@
- 		*cp++ = '\n';
- 		*cp = 0;	/* end of string */
- 	} else {		/* simultaneous read/write access forbidden ! */
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+		MOD_DEC_USE_COUNT;
-+#else
- 		unlock_kernel();
-+#endif
- 		return (-EPERM);	/* no permission this time */
- 	}
-+#ifndef COMPAT_USE_MODCOUNT_LOCK
- 	unlock_kernel();
-+#endif
- 	return (0);
- }				/* hysdn_conf_open */
- 
-@@ -338,7 +359,9 @@
- 	int retval = 0;
- 	struct proc_dir_entry *pd;
- 
-+#ifndef COMPAT_USE_MODCOUNT_LOCK
- 	lock_kernel();
-+#endif
- 	/* search the addressed card */
- 	card = card_root;
- 	while (card) {
-@@ -348,7 +371,9 @@
- 		card = card->next;	/* search next entry */
- 	}
- 	if (!card) {
-+#ifndef COMPAT_USE_MODCOUNT_LOCK
- 		unlock_kernel();
-+#endif
- 		return (-ENODEV);	/* device is unknown/invalid */
- 	}
- 	if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
-@@ -371,7 +396,11 @@
- 		if (filep->private_data)
- 			kfree(filep->private_data);	/* release memory */
- 	}
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+	MOD_DEC_USE_COUNT;
-+#else
- 	unlock_kernel();
-+#endif
- 	return (retval);
- }				/* hysdn_conf_close */
- 
-@@ -387,6 +416,9 @@
- 	release:        hysdn_conf_close,                                       
- };
- 
-+#ifdef COMPAT_NO_SOFTNET
-+static struct inode_operations conf_inode_operations;
-+#endif
- /*****************************/
- /* hysdn subdir in /proc/net */
- /*****************************/
-@@ -415,8 +447,17 @@
- 		if ((card->procconf = (void *) create_proc_entry(conf_name,
- 					     S_IFREG | S_IRUGO | S_IWUSR,
- 					    hysdn_proc_entry)) != NULL) {
-+#ifdef COMPAT_NO_SOFTNET
-+			memset(&conf_inode_operations, 0, sizeof(struct inode_operations));
-+			conf_inode_operations.default_file_ops = &conf_fops;
-+
-+			((struct proc_dir_entry *) card->procconf)->ops = &conf_inode_operations;
-+#else
- 			((struct proc_dir_entry *) card->procconf)->proc_fops = &conf_fops;
-+#ifdef COMPAT_HAS_FILEOP_OWNER
- 			((struct proc_dir_entry *) card->procconf)->owner = THIS_MODULE;
-+#endif
-+#endif
- 			hysdn_proclog_init(card);	/* init the log file entry */
- 		}
- 		card = card->next;	/* next entry */
-diff -rNu linux-2.4.29.old/drivers/isdn/hysdn/hysdn_proclog.c linux-2.4.29/drivers/isdn/hysdn/hysdn_proclog.c
---- linux-2.4.29.old/drivers/isdn/hysdn/hysdn_proclog.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hysdn/hysdn_proclog.c	2005-03-22 15:06:48.613702376 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hysdn_proclog.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Linux driver for HYSDN cards, /proc/net filesystem log functions.
-  *
-@@ -16,7 +16,9 @@
- #include <linux/poll.h>
- #include <linux/proc_fs.h>
- #include <linux/pci.h>
-+#ifndef COMPAT_USE_MODCOUNT_LOCK
- #include <linux/smp_lock.h>
-+#endif
- 
- #include "hysdn_defs.h"
- 
-@@ -115,8 +117,7 @@
- 	strcpy(ib->log_start, cp);	/* set output string */
- 	ib->next = NULL;
- 	ib->proc_ctrl = pd;	/* point to own control structure */
--	save_flags(flags);
--	cli();
-+	HYSDN_SPIN_LOCK(&card->irq_lock, flags);
- 	ib->usage_cnt = pd->if_used;
- 	if (!pd->log_head)
- 		pd->log_head = ib;	/* new head */
-@@ -124,7 +125,7 @@
- 		pd->log_tail->next = ib;	/* follows existing messages */
- 	pd->log_tail = ib;	/* new tail */
- 	i = pd->del_lock++;	/* get lock state */
--	restore_flags(flags);
-+	HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 
- 	/* delete old entrys */
- 	if (!i)
-@@ -210,7 +211,6 @@
- 	word ino;
- 	struct procdata *pd = NULL;
- 	hysdn_card *card;
--	loff_t pos = *off;
- 
- 	if (!*((struct log_data **) file->private_data)) {
- 		if (file->f_flags & O_NONBLOCK)
-@@ -235,11 +235,11 @@
- 		return (0);
- 
- 	inf->usage_cnt--;	/* new usage count */
--	file->private_data = &inf->next;	/* next structure */
-+	(struct log_data **) file->private_data = &inf->next;	/* next structure */
- 	if ((len = strlen(inf->log_start)) <= count) {
- 		if (copy_to_user(buf, inf->log_start, len))
- 			return -EFAULT;
--		*off = pos + len;
-+		file->f_pos += len;
- 		return (len);
- 	}
- 	return (0);
-@@ -255,7 +255,11 @@
- 	struct procdata *pd = NULL;
- 	ulong flags;
- 
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+	MOD_INC_USE_COUNT;
-+#else
- 	lock_kernel();
-+#endif
- 	card = card_root;
- 	while (card) {
- 		pd = card->proclog;
-@@ -264,7 +268,11 @@
- 		card = card->next;	/* search next entry */
- 	}
- 	if (!card) {
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+		MOD_DEC_USE_COUNT;
-+#else
- 		unlock_kernel();
-+#endif
- 		return (-ENODEV);	/* device is unknown/invalid */
- 	}
- 	filep->private_data = card;	/* remember our own card */
-@@ -274,19 +282,24 @@
- 	} else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
- 
- 		/* read access -> log/debug read */
--		save_flags(flags);
--		cli();
-+		HYSDN_SPIN_LOCK(&card->irq_lock, flags);
- 		pd->if_used++;
- 		if (pd->log_head)
--			filep->private_data = &(pd->log_tail->next);
-+			(struct log_data **) filep->private_data = &(pd->log_tail->next);
- 		else
--			filep->private_data = &(pd->log_head);
--		restore_flags(flags);
-+			(struct log_data **) filep->private_data = &(pd->log_head);
-+		HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 	} else {		/* simultaneous read/write access forbidden ! */
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+		MOD_DEC_USE_COUNT;
-+#else
- 		unlock_kernel();
-+#endif
- 		return (-EPERM);	/* no permission this time */
- 	}
-+#ifndef COMPAT_USE_MODCOUNT_LOCK
- 	unlock_kernel();
-+#endif
- 	return (0);
- }				/* hysdn_log_open */
- 
-@@ -306,7 +319,9 @@
- 	int flags, retval = 0;
- 
- 
-+#ifndef COMPAT_USE_MODCOUNT_LOCK
- 	lock_kernel();
-+#endif
- 	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
- 		/* write only access -> write debug level written */
- 		retval = 0;	/* success */
-@@ -314,8 +329,7 @@
- 		/* read access -> log/debug read, mark one further file as closed */
- 
- 		pd = NULL;
--		save_flags(flags);
--		cli();
-+		HYSDN_SPIN_LOCK(&card->irq_lock, flags);
- 		inf = *((struct log_data **) filep->private_data);	/* get first log entry */
- 		if (inf)
- 			pd = (struct procdata *) inf->proc_ctrl;	/* still entries there */
-@@ -338,7 +352,7 @@
- 			inf->usage_cnt--;	/* decrement usage count for buffers */
- 			inf = inf->next;
- 		}
--		restore_flags(flags);
-+		HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 
- 		if (pd)
- 			if (pd->if_used <= 0)	/* delete buffers if last file closed */
-@@ -348,7 +362,11 @@
- 					kfree(inf);
- 				}
- 	}			/* read access */
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+	MOD_DEC_USE_COUNT;
-+#else
- 	unlock_kernel();
-+#endif
- 
- 	return (retval);
- }				/* hysdn_log_close */
-@@ -400,6 +418,9 @@
- 	release:        hysdn_log_close,                                        
- };
- 
-+#ifdef COMPAT_NO_SOFTNET
-+struct inode_operations log_inode_operations;
-+#endif
- 
- /***********************************************************************************/
- /* hysdn_proclog_init is called when the module is loaded after creating the cards */
-@@ -414,10 +435,20 @@
- 
- 	if ((pd = (struct procdata *) kmalloc(sizeof(struct procdata), GFP_KERNEL)) != NULL) {
- 		memset(pd, 0, sizeof(struct procdata));
-+#ifdef COMPAT_NO_SOFTNET
-+		memset(&log_inode_operations, 0, sizeof(struct inode_operations));
-+		log_inode_operations.default_file_ops = &log_fops;
-+#endif
- 		sprintf(pd->log_name, "%s%d", PROC_LOG_BASENAME, card->myid);
- 		if ((pd->log = create_proc_entry(pd->log_name, S_IFREG | S_IRUGO | S_IWUSR, hysdn_proc_entry)) != NULL) {
-+#ifdef COMPAT_NO_SOFTNET
-+			pd->log->ops = &log_inode_operations;	/* set new operations table */
-+#else
- 		        pd->log->proc_fops = &log_fops; 
-+#ifdef COMPAT_HAS_FILEOP_OWNER
- 		        pd->log->owner = THIS_MODULE;
-+#endif
-+#endif
- 		}
- 
- 		init_waitqueue_head(&(pd->rd_queue));
-diff -rNu linux-2.4.29.old/drivers/isdn/hysdn/hysdn_sched.c linux-2.4.29/drivers/isdn/hysdn/hysdn_sched.c
---- linux-2.4.29.old/drivers/isdn/hysdn/hysdn_sched.c	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/hysdn/hysdn_sched.c	2005-03-22 15:06:48.630699792 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hysdn_sched.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id: hysdn_sched.c,v 1.9 2001/09/24 13:23:03 kai Exp $
-  *
-  * Linux driver for HYSDN cards
-  * scheduler routines for handling exchange card <-> pc.
-@@ -12,11 +12,9 @@
-  */
- 
- #include <linux/config.h>
--#include <linux/sched.h>
- #include <linux/signal.h>
- #include <linux/kernel.h>
- #include <linux/ioport.h>
--#include <linux/interrupt.h>
- #include <asm/io.h>
- 
- #include "hysdn_defs.h"
-@@ -151,22 +149,19 @@
- 
- 	if (card->debug_flags & LOG_SCHED_ASYN)
- 		hysdn_addlog(card, "async tx-cfg chan=%d len=%d", chan, strlen(line) + 1);
--
--	save_flags(flags);
--	cli();
-+	HYSDN_SPIN_LOCK(&card->irq_lock, flags);
- 	while (card->async_busy) {
--		sti();
--
-+		HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 		if (card->debug_flags & LOG_SCHED_ASYN)
- 			hysdn_addlog(card, "async tx-cfg delayed");
- 
- 		set_current_state(TASK_INTERRUPTIBLE);
- 		schedule_timeout((20 * HZ) / 1000);	/* Timeout 20ms */
- 		if (!--cnt) {
--			restore_flags(flags);
-+			HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 			return (-ERR_ASYNC_TIME);	/* timed out */
- 		}
--		cli();
-+		HYSDN_SPIN_LOCK(&card->irq_lock, flags);
- 	}			/* wait for buffer to become free */
- 
- 	strcpy(card->async_data, line);
-@@ -177,31 +172,26 @@
- 	/* now queue the task */
- 	queue_task(&card->irq_queue, &tq_immediate);
- 	mark_bh(IMMEDIATE_BH);
--	sti();
--
-+	HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 	if (card->debug_flags & LOG_SCHED_ASYN)
- 		hysdn_addlog(card, "async tx-cfg data queued");
- 
- 	cnt++;			/* short delay */
--	cli();
--
-+	HYSDN_SPIN_LOCK(&card->irq_lock, flags);
- 	while (card->async_busy) {
--		sti();
--
-+		HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 		if (card->debug_flags & LOG_SCHED_ASYN)
- 			hysdn_addlog(card, "async tx-cfg waiting for tx-ready");
- 
- 		set_current_state(TASK_INTERRUPTIBLE);
- 		schedule_timeout((20 * HZ) / 1000);	/* Timeout 20ms */
- 		if (!--cnt) {
--			restore_flags(flags);
-+			HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 			return (-ERR_ASYNC_TIME);	/* timed out */
- 		}
--		cli();
-+		HYSDN_SPIN_LOCK(&card->irq_lock, flags);
- 	}			/* wait for buffer to become free again */
--
--	restore_flags(flags);
--
-+	HYSDN_SPIN_UNLOCK(&card->irq_lock, flags);
- 	if (card->debug_flags & LOG_SCHED_ASYN)
- 		hysdn_addlog(card, "async tx-cfg data send");
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/icn/icn.c linux-2.4.29/drivers/isdn/icn/icn.c
---- linux-2.4.29.old/drivers/isdn/icn/icn.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/icn/icn.c	2005-03-22 15:06:48.722685808 +0100
-@@ -1,4 +1,4 @@
--/* $Id: icn.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * ISDN low-level module for the ICN active ISDN-Card.
-  *
-@@ -41,7 +41,7 @@
- #undef MAP_DEBUG
- 
- static char
--*revision = "$Revision: 1.1.4.1 $";
-+*revision = "$Revision$";
- 
- static int icn_addcard(int, char *, char *);
- 
-@@ -1634,6 +1634,7 @@
- }
- 
- #ifndef MODULE
-+#ifdef COMPAT_HAS_NEW_SETUP
- static int __init
- icn_setup(char *line)
- {
-@@ -1643,6 +1644,14 @@
- 	static char sid2[20];
- 
- 	str = get_options(line, 2, ints);
-+#else
-+void
-+icn_setup(char *str, int *ints)
-+{
-+	char *p;
-+	static char sid[20];
-+	static char sid2[20];
-+#endif
- 	if (ints[0])
- 		portbase = ints[1];
- 	if (ints[0] > 1)
-@@ -1656,9 +1665,13 @@
- 			icn_id2 = sid2;
- 		}
- 	}
-+#ifdef COMPAT_HAS_NEW_SETUP
- 	return(1);
- }
- __setup("icn=", icn_setup);
-+#else
-+}
-+#endif
- #endif /* MODULE */
- 
- static int __init icn_init(void)
-diff -rNu linux-2.4.29.old/drivers/isdn/icn/icn.h linux-2.4.29/drivers/isdn/icn/icn.h
---- linux-2.4.29.old/drivers/isdn/icn/icn.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/icn/icn.h	2005-03-22 15:06:48.752681248 +0100
-@@ -1,4 +1,4 @@
--/* $Id: icn.h,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * ISDN lowlevel-module for the ICN active ISDN-Card.
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_audio.c linux-2.4.29/drivers/isdn/isdn_audio.c
---- linux-2.4.29.old/drivers/isdn/isdn_audio.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_audio.c	2005-03-22 15:06:44.306357192 +0100
-@@ -1,9 +1,9 @@
--/* $Id: isdn_audio.c,v 1.1.4.1 2001/11/20 14:19:33 kai Exp $
-+/* $Id: isdn_audio.c,v 1.24 2002/08/13 09:57:26 keil Exp $
-  *
-  * Linux ISDN subsystem, audio conversion and compression (linklevel).
-  *
-  * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de)
-- * DTMF code (c) 1996 by Christian Mock (cm@kukuruz.ping.at)
-+ * DTMF code (c) 1996 by Christian Mock (cm@tahina.priv.at)
-  * Silence detection (c) 1998 by Armin Schindler (mac@gismo.telekom.de)
-  *
-  * This software may be used and distributed according to the terms
-@@ -15,7 +15,7 @@
- #include "isdn_audio.h"
- #include "isdn_common.h"
- 
--char *isdn_audio_revision = "$Revision: 1.1.4.1 $";
-+char *isdn_audio_revision = "$Revision: 1.24 $";
- 
- /*
-  * Misc. lookup-tables.
-@@ -169,19 +169,39 @@
- 	0x8a, 0x8a, 0x6a, 0x6a, 0xea, 0xea, 0x2a, 0x2a
- };
- 
--#define NCOEFF            8     /* number of frequencies to be analyzed       */
--#define DTMF_TRESH     4000     /* above this is dtmf                         */
-+#define NCOEFF           16     /* number of frequencies to be analyzed       */
-+#define DTMF_TRESH    25000     /* above this is dtmf                         */
- #define SILENCE_TRESH   200     /* below this is silence                      */
-+#define H2_TRESH      20000     /* 2nd harmonic                               */
- #define AMP_BITS          9     /* bits per sample, reduced to avoid overflow */
- #define LOGRP             0
- #define HIGRP             1
- 
-+typedef struct {
-+	int grp;                /* low/high group     */
-+	int k;                  /* k                  */
-+	int k2;                 /* k fuer 2. harmonic */
-+} dtmf_t;
-+
- /* For DTMF recognition:
-  * 2 * cos(2 * PI * k / N) precalculated for all k
-  */
- static int cos2pik[NCOEFF] =
- {
--	55813, 53604, 51193, 48591, 38114, 33057, 25889, 18332
-+	55812, 29528, 53603, 24032, 51193, 14443, 48590, 6517,
-+	38113, -21204, 33057, -32186, 25889, -45081, 18332, -55279
-+};
-+
-+static dtmf_t dtmf_tones[8] =
-+{
-+	{LOGRP, 0, 1},          /*  697 Hz */
-+	{LOGRP, 2, 3},          /*  770 Hz */
-+	{LOGRP, 4, 5},          /*  852 Hz */
-+	{LOGRP, 6, 7},          /*  941 Hz */
-+	{HIGRP, 8, 9},          /* 1209 Hz */
-+	{HIGRP, 10, 11},        /* 1336 Hz */
-+	{HIGRP, 12, 13},        /* 1477 Hz */
-+	{HIGRP, 14, 15}         /* 1633 Hz */
- };
- 
- static char dtmf_matrix[4][4] =
-@@ -208,7 +228,7 @@
- 	:	"memory", "ax");
- #else
- 	while (n--)
--		*buff = table[*(unsigned char *)buff], buff++;
-+		*buff++ = table[*(unsigned char *)buff];
- #endif
- }
- 
-@@ -479,18 +499,6 @@
- 			sk2 = sk1;
- 			sk1 = sk;
- 		}
--		/* Avoid overflows */
--		sk >>= 1;
--		sk2 >>= 1;
--		/* compute |X(k)|**2 */
--		/* report overflows. This should not happen. */
--		/* Comment this out if desired */
--		if (sk < -32768 || sk > 32767)
--			printk(KERN_DEBUG
--			       "isdn_audio: dtmf goertzel overflow, sk=%d\n", sk);
--		if (sk2 < -32768 || sk2 > 32767)
--			printk(KERN_DEBUG
--			       "isdn_audio: dtmf goertzel overflow, sk2=%d\n", sk2);
- 		result[k] =
- 		    ((sk * sk) >> AMP_BITS) -
- 		    ((((cos2pik[k] * sk) >> 15) * sk2) >> AMP_BITS) +
-@@ -514,58 +522,28 @@
- 	int grp[2];
- 	char what;
- 	char *p;
--	int thresh;
- 
- 	while ((skb = skb_dequeue(&info->dtmf_queue))) {
- 		result = (int *) skb->data;
- 		s = info->dtmf_state;
--		grp[LOGRP] = grp[HIGRP] = -1;
-+		grp[LOGRP] = grp[HIGRP] = -2;
- 		silence = 0;
--		thresh = 0;
--		for (i = 0; i < NCOEFF; i++) {
--			if (result[i] > DTMF_TRESH) {
--				if (result[i] > thresh)
--					thresh = result[i];
--			}
--			else if (result[i] < SILENCE_TRESH)
-+		for (i = 0; i < 8; i++) {
-+			if ((result[dtmf_tones[i].k] > DTMF_TRESH) &&
-+			    (result[dtmf_tones[i].k2] < H2_TRESH))
-+				grp[dtmf_tones[i].grp] = (grp[dtmf_tones[i].grp] == -2) ? i : -1;
-+			else if ((result[dtmf_tones[i].k] < SILENCE_TRESH) &&
-+			      (result[dtmf_tones[i].k2] < SILENCE_TRESH))
- 				silence++;
- 		}
--		if (silence == NCOEFF)
-+		if (silence == 8)
- 			what = ' ';
- 		else {
--			if (thresh > 0)	{
--				thresh = thresh >> 4;  /* touchtones must match within 12 dB */
--				for (i = 0; i < NCOEFF; i++) {
--					if (result[i] < thresh)
--						continue;  /* ignore */
--					/* good level found. This is allowed only one time per group */
--					if (i < NCOEFF / 2) {
--						/* lowgroup*/
--						if (grp[LOGRP] >= 0) {
--							// Bad. Another tone found. */
--							grp[LOGRP] = -1;
--							break;
--						}
--						else
--							grp[LOGRP] = i;
--					}
--					else { /* higroup */
--						if (grp[HIGRP] >= 0) { // Bad. Another tone found. */
--							grp[HIGRP] = -1;
--							break;
--						}
--						else
--							grp[HIGRP] = i - NCOEFF/2;
--					}
--				}
--				if ((grp[LOGRP] >= 0) && (grp[HIGRP] >= 0)) {
--					what = dtmf_matrix[grp[LOGRP]][grp[HIGRP]];
--					if (s->last != ' ' && s->last != '.')
--						s->last = what;	/* min. 1 non-DTMF between DTMF */
--				} else
--					what = '.';
--			}
--			else
-+			if ((grp[LOGRP] >= 0) && (grp[HIGRP] >= 0)) {
-+				what = dtmf_matrix[grp[LOGRP]][grp[HIGRP] - 4];
-+				if (s->last != ' ' && s->last != '.')
-+					s->last = what;	/* min. 1 non-DTMF between DTMF */
-+			} else
- 				what = '.';
- 		}
- 		if ((what != s->last) && (what != ' ') && (what != '.')) {
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_audio.h linux-2.4.29/drivers/isdn/isdn_audio.h
---- linux-2.4.29.old/drivers/isdn/isdn_audio.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_audio.h	2005-03-22 15:06:44.321354912 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_audio.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_audio.h,v 1.10 2001/09/24 13:22:42 kai Exp $
-  *
-  * Linux ISDN subsystem, audio conversion and compression (linklevel).
-  *
-@@ -20,7 +20,6 @@
- 
- typedef struct dtmf_state {
- 	char last;
--	char llast;
- 	int idx;
- 	int buf[DTMF_NPOINTS];
- } dtmf_state;
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_bsdcomp.c linux-2.4.29/drivers/isdn/isdn_bsdcomp.c
---- linux-2.4.29.old/drivers/isdn/isdn_bsdcomp.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_bsdcomp.c	2005-03-22 15:06:44.339352176 +0100
-@@ -105,6 +105,14 @@
- 
- #define DEBUG 1
- 
-+#ifdef CONFIG_ISDN_WITH_ABC
-+#define BSD_C_MALLOC(x)     kmalloc((x),GFP_ATOMIC)
-+#define BSD_C_FREE(x)       kfree(x)
-+#else
-+#define BSD_C_MALLOC(x)     vmalloc(x)
-+#define BSD_C_FREE(x)       vfree(x)
-+#endif
-+
- /*
-  * A dictionary for doing BSD compress.
-  */
-@@ -285,7 +293,7 @@
- 		 * Release the dictionary
- 		 */
- 		if (db->dict) {
--			vfree (db->dict);
-+			BSD_C_FREE (db->dict);
- 			db->dict = NULL;
- 		}
- 
-@@ -293,7 +301,7 @@
- 		 * Release the string buffer
- 		 */
- 		if (db->lens) {
--			vfree (db->lens);
-+			BSD_C_FREE (db->lens);
- 			db->lens = NULL;
- 		}
- 
-@@ -350,14 +358,19 @@
- 	 * Allocate space for the dictionary. This may be more than one page in
- 	 * length.
- 	 */
--	db->dict = (struct bsd_dict *) vmalloc (hsize * sizeof (struct bsd_dict));
-+	db->dict = (struct bsd_dict *) BSD_C_MALLOC (hsize * sizeof (struct bsd_dict));
-+
-+	MOD_INC_USE_COUNT;
-+	/*
-+	** MOD_INC_USE_COUNT must be before bsd_free
-+	** bsd_free make MOD_DEC_USE_COUNT if db != NULL
-+	*/
-+
- 	if (!db->dict) {
- 		bsd_free (db);
- 		return NULL;
- 	}
- 
--	MOD_INC_USE_COUNT;
--
- 	/*
- 	 * If this is the compression buffer then there is no length data.
- 	 * For decompression, the length information is needed as well.
-@@ -365,7 +378,7 @@
- 	if (!decomp)
- 		db->lens = NULL;
- 	else {
--		db->lens = (unsigned short *) vmalloc ((maxmaxcode + 1) *
-+		db->lens = (unsigned short *) BSD_C_MALLOC ((maxmaxcode + 1) *
- 			sizeof (db->lens[0]));
- 		if (!db->lens) {
- 			bsd_free (db); /* calls MOD_DEC_USE_COUNT; */
-@@ -478,7 +491,11 @@
- 	int hval,disp,ilen,mxcode;
- 	unsigned char *rptr = skb_in->data;
- 	int isize = skb_in->len;
-+#ifdef CONFIG_ISDN_WITH_ABC
-+	long secure = 0;
-+#endif
- 
-+#ifndef CONFIG_ISDN_WITH_ABC
- #define OUTPUT(ent)			\
-   {					\
-     bitno -= n_bits;			\
-@@ -490,17 +507,45 @@
- 	bitno += 8;			\
-     } while (bitno <= 24);		\
-   }
-+#else
-+#define OUTPUT(ent)			\
-+  {					\
-+  	secure = 0;					\
-+    bitno -= n_bits;			\
-+    accm |= ((ent) << bitno);		\
-+    do	{				\
-+        if(skb_out && skb_tailroom(skb_out) > 0) 	\
-+      		*(skb_put(skb_out,1)) = (unsigned char) (accm>>24); \
-+	accm <<= 8;			\
-+	bitno += 8;			\
-+	} while (bitno <= 24 && ++secure < 10000);		\
-+	if(secure >= 10000) {							\
-+		printk(KERN_DEBUG "BSD in OUTPUT secure counter reached\n");	\
-+		return 0;									\
-+	}												\
-+  }
-+#endif
- 
- 	/*
- 	 * If the protocol is not in the range we're interested in,
- 	 * just return without compressing the packet.  If it is,
- 	 * the protocol becomes the first byte to compress.
- 	 */
-+#ifdef CONFIG_ISDN_WITH_ABC
-+	ent = proto;
-+
-+	if (proto < 0x21 || proto > 0xf9 || !(proto & 0x1) ) {
-+
-+		printk(KERN_DEBUG "bsd_compress called with %x\n",proto);
-+		return 0;
-+	}
-+#else
- 	printk(KERN_DEBUG "bsd_compress called with %x\n",proto);
- 	
- 	ent = proto;
- 	if (proto < 0x21 || proto > 0xf9 || !(proto & 0x1) )
- 		return 0;
-+#endif
- 
- 	db      = (struct bsd_db *) state;
- 	hshift  = db->hshift;
-@@ -538,6 +583,9 @@
- 	
- 		/* continue probing until a match or invalid entry */
- 		disp = (hval == 0) ? 1 : hval;
-+#ifdef CONFIG_ISDN_WITH_ABC
-+		secure = 0;
-+#endif
- 
- 		do {
- 			hval += disp;
-@@ -546,7 +594,15 @@
- 			dictp = dict_ptr (db, hval);
- 			if (dictp->codem1 >= max_ent)
- 				goto nomatch;
-+#ifndef CONFIG_ISDN_WITH_ABC
- 		} while (dictp->fcode != fcode);
-+#else
-+		} while (dictp->fcode != fcode && ++secure < 100000);
-+		if(secure >= 100000) {
-+			printk(KERN_DEBUG "BSD: compress while dictp->fcode != fcode secure-counter reached\n");
-+			return 0;
-+		}
-+#endif
- 
- 		ent = dictp->codem1 + 1;	/* finally found (prefix,suffix) */
- 		continue;
-@@ -669,6 +725,9 @@
- 	int ilen;
- 	int codelen;
- 	int extra;
-+#ifdef CONFIG_ISDN_WITH_ABC
-+	unsigned long secure = 0;
-+#endif
- 
- 	db       = (struct bsd_db *) state;
- 	max_ent  = db->max_ent;
-@@ -677,7 +736,9 @@
- 	n_bits   = db->n_bits;
- 	tgtbitno = 32 - n_bits;	/* bitno when we have a code */
- 
-+#ifndef CONFIG_ISDN_WITH_ABC
- 	printk(KERN_DEBUG "bsd_decompress called\n");
-+#endif
- 
- 	if(!skb_in || !skb_out) {
- 		printk(KERN_ERR "bsd_decompress called with NULL parameter\n");
-@@ -795,7 +856,11 @@
- 
- 		p     = skb_put(skb_out,codelen);
- 		p += codelen;
-+#ifdef CONFIG_ISDN_WITH_ABC
-+		for(secure = 0; finchar > LAST && secure < 50000;secure++) {
-+#else
- 		while (finchar > LAST) {
-+#endif
- 			struct bsd_dict *dictp2 = dict_ptr (db, finchar);
- 	    
- 			dictp = dict_ptr (db, dictp2->cptr);
-@@ -822,6 +887,12 @@
- 			}
- 		}
- 		*--p = finchar;
-+#ifdef CONFIG_ISDN_WITH_ABC
-+		if(secure >= 50000) {
-+			printk(KERN_DEBUG "BSD: decompress secure-counter reached\n");
-+			return DECOMP_FATALERROR;
-+		}
-+#endif
- 	
- #ifdef DEBUG
- 		if (--codelen != 0)
-@@ -851,12 +922,23 @@
- 			/* look for a free hash table entry */
- 			if (dictp->codem1 < max_ent) {
- 				disp = (hval == 0) ? 1 : hval;
-+#ifdef CONFIG_ISDN_WITH_ABC
-+				secure = 0;
-+#endif
- 				do {
- 					hval += disp;
- 					if (hval >= db->hsize)
- 						hval -= db->hsize;
- 					dictp = dict_ptr (db, hval);
-+#ifndef CONFIG_ISDN_WITH_ABC
- 				} while (dictp->codem1 < max_ent);
-+#else
-+				} while (dictp->codem1 < max_ent && ++secure < 50000);
-+				if(secure >= 50000) {
-+					printk(KERN_DEBUG "BSD: decomp while (dictp->codem1 < max_ent) secure-counter reached\n");
-+					return DECOMP_FATALERROR;
-+				}
-+#endif
- 			}
- 	    
- 			/*
-@@ -895,11 +977,21 @@
- 	db->comp_bytes   += skb_in->len - BSD_OVHD;
- 	db->uncomp_bytes += skb_out->len;
- 
-+#ifdef CONFIG_ISDN_WITH_ABC
-+	/*
-+	** bsd_check will call bsd_clear 
-+	** and so on the internal tables will be cleared.
-+	**
-+	** I think that's not what we will at this point ?????
-+	** For me at works without bsd_check.
-+	*/
-+#else
- 	if (bsd_check(db)) {
- 		if (db->debug)
- 			printk(KERN_DEBUG "bsd_decomp%d: peer should have cleared dictionary on %d\n",
- 				db->unit, db->seqno - 1);
- 	}
-+#endif
- 	return skb_out->len;
- }
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_common.c linux-2.4.29/drivers/isdn/isdn_common.c
---- linux-2.4.29.old/drivers/isdn/isdn_common.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_common.c	2005-03-22 15:06:44.359349136 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_common.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_common.c,v 1.137 2002/02/09 21:19:11 keil Exp $
-  *
-  * Linux ISDN subsystem, common used functions (linklevel).
-  *
-@@ -19,6 +19,7 @@
- #include <linux/vmalloc.h>
- #include <linux/isdn.h>
- #include <linux/smp_lock.h>
-+#include <linux/list.h>
- #include "isdn_common.h"
- #include "isdn_tty.h"
- #include "isdn_net.h"
-@@ -33,7 +34,9 @@
- #include <linux/isdn_divertif.h>
- #endif /* CONFIG_ISDN_DIVERSION */
- #include "isdn_v110.h"
-+#ifdef HAVE_DEVFS_FS
- #include <linux/devfs_fs_kernel.h>
-+#endif /* HAVE_DEVFS_FS */
- 
- /* Debugflags */
- #undef ISDN_DEBUG_STATCALLB
-@@ -44,7 +47,7 @@
- 
- isdn_dev *dev;
- 
--static char *isdn_revision = "$Revision: 1.1.4.1 $";
-+static char *isdn_revision = "$Revision: 1.137 $";
- 
- extern char *isdn_net_revision;
- extern char *isdn_tty_revision;
-@@ -67,19 +70,19 @@
- 
- static int isdn_writebuf_stub(int, int, const u_char *, int, int);
- static void set_global_features(void);
-+#ifdef HAVE_DEVFS_FS
- static void isdn_register_devfs(int);
- static void isdn_unregister_devfs(int);
-+#endif /* HAVE_DEVFS_FS */
- static int isdn_wildmat(char *s, char *p);
- 
- void
- isdn_lock_drivers(void)
- {
- 	int i;
--	isdn_ctrl cmd;
- 
--	for (i = 0; i < ISDN_MAX_DRIVERS; i++) {
--		if (!dev->drv[i])
--			continue;
-+	for (i = 0; i < dev->drivers; i++) {
-+		isdn_ctrl cmd;
- 
- 		cmd.driver = i;
- 		cmd.arg = 0;
-@@ -101,10 +104,7 @@
- {
- 	int i;
- 
--	for (i = 0; i < ISDN_MAX_DRIVERS; i++) {
--		if (!dev->drv[i])
--			continue;
--
-+	for (i = 0; i < dev->drivers; i++)
- 		if (dev->drv[i]->locks > 0) {
- 			isdn_ctrl cmd;
- 
-@@ -114,7 +114,6 @@
- 			isdn_command(&cmd);
- 			dev->drv[i]->locks--;
- 		}
--	}
- }
- 
- void
-@@ -473,6 +472,7 @@
- 			dev->drv[di]->flags &= ~DRV_FLAG_RUNNING;
- 			break;
- 		case ISDN_STAT_ICALL:
-+		case ISDN_STAT_ICALLW:
- 			if (i < 0)
- 				return -1;
- #ifdef ISDN_DEBUG_STATCALLB
-@@ -718,7 +718,9 @@
- 					dev->drvmap[i] = -1;
- 					dev->chanmap[i] = -1;
- 					dev->usage[i] &= ~ISDN_USAGE_DISABLED;
-+#ifdef HAVE_DEVFS_FS
- 					isdn_unregister_devfs(i);
-+#endif /* HAVE_DEVFS_FS */
- 				}
- 			dev->drivers--;
- 			dev->channels -= dev->drv[di]->channels;
-@@ -755,6 +757,10 @@
-                         if (divert_if)
-                           return(divert_if->stat_callback(c));
- #endif /* CONFIG_ISDN_DIVERSION */
-+		case ISDN_STAT_ALERT:
-+		case ISDN_STAT_PROCEED:
-+			isdn_tty_stat_callback(i, c);
-+			break;
- 		default:
- 			return -1;
- 	}
-@@ -900,72 +906,239 @@
- 	return (dev->chanmap[minor]);
- }
- 
--static char *
--isdn_statstr(void)
-+// ----------------------------------------------------------------------
-+// /dev/isdninfo
-+// 
-+// This device has somewhat insane semantics, but we need to support
-+// them for the sake of compatibility.
-+//
-+// After opening, the first read will succeed and return the current state
-+// Then, unless O_NONBLOCK is set, it will block until a state change happens
-+// and then return the new state.
-+// Also, if the buffer size for the read is too small, we'll just return
-+// EOF
-+
-+struct isdnstatus_dev {
-+	struct list_head list;
-+	int update;
-+};
-+
-+static DECLARE_WAIT_QUEUE_HEAD(isdnstatus_waitq);
-+static LIST_HEAD(isdnstatus_devs);
-+static spinlock_t isdnstatus_devs_lock = SPIN_LOCK_UNLOCKED;
-+
-+void
-+isdn_info_update(void)
-+{
-+	struct list_head *p;
-+	struct isdnstatus_dev *idev;
-+
-+	spin_lock(&isdnstatus_devs_lock);
-+	list_for_each(p, &isdnstatus_devs) {
-+		idev = list_entry(p, struct isdnstatus_dev, list);
-+		idev->update = 1;
-+	}
-+	spin_unlock(&isdnstatus_devs_lock);
-+	wake_up_interruptible(&isdnstatus_waitq);
-+}
-+
-+static int
-+isdnstatus_open(struct inode *ino, struct file *filep)
-+{
-+	struct isdnstatus_dev *p;
-+
-+	p = kmalloc(sizeof(struct isdnstatus_dev), GFP_USER);
-+	if (!p)
-+		return -ENOMEM;
-+
-+	/* At opening time we allow a single update */
-+	p->update = 1;
-+	spin_lock(&isdnstatus_devs_lock);
-+	list_add(&p->list, &isdnstatus_devs);
-+	spin_unlock(&isdnstatus_devs_lock);
-+	filep->private_data = p;
-+
-+	return 0;
-+}
-+
-+static void
-+isdnstatus_close(struct inode *ino, struct file *filep)
-+{
-+	struct isdnstatus_dev *p = filep->private_data;
-+
-+	spin_lock(&isdnstatus_devs_lock);
-+	list_del(&p->list);
-+	spin_unlock(&isdnstatus_devs_lock);
-+	kfree(p);
-+}
-+
-+// FIXME we don't lock against the state changing whilst being
-+// printed
-+
-+void
-+isdn_statstr(char *buf)
- {
--	static char istatbuf[2048];
- 	char *p;
- 	int i;
- 
--	sprintf(istatbuf, "idmap:\t");
--	p = istatbuf + strlen(istatbuf);
-+	p = buf;
-+	p += sprintf(p, "idmap:\t");
- 	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
--		sprintf(p, "%s ", (dev->drvmap[i] < 0) ? "-" : dev->drvid[dev->drvmap[i]]);
--		p = istatbuf + strlen(istatbuf);
-+		p += sprintf(p, "%s ", (dev->drvmap[i] < 0) ? "-" : dev->drvid[dev->drvmap[i]]);
- 	}
--	sprintf(p, "\nchmap:\t");
--	p = istatbuf + strlen(istatbuf);
-+	p += sprintf(p, "\nchmap:\t");
- 	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
--		sprintf(p, "%d ", dev->chanmap[i]);
--		p = istatbuf + strlen(istatbuf);
-+		p += sprintf(p, "%d ", dev->chanmap[i]);
- 	}
--	sprintf(p, "\ndrmap:\t");
--	p = istatbuf + strlen(istatbuf);
-+	p += sprintf(p, "\ndrmap:\t");
- 	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
--		sprintf(p, "%d ", dev->drvmap[i]);
--		p = istatbuf + strlen(istatbuf);
-+		p += sprintf(p, "%d ", dev->drvmap[i]);
- 	}
--	sprintf(p, "\nusage:\t");
--	p = istatbuf + strlen(istatbuf);
-+	p += sprintf(p, "\nusage:\t");
- 	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
--		sprintf(p, "%d ", dev->usage[i]);
--		p = istatbuf + strlen(istatbuf);
-+		p += sprintf(p, "%d ", dev->usage[i]);
- 	}
--	sprintf(p, "\nflags:\t");
--	p = istatbuf + strlen(istatbuf);
-+	p += sprintf(p, "\nflags:\t");
- 	for (i = 0; i < ISDN_MAX_DRIVERS; i++) {
- 		if (dev->drv[i]) {
--			sprintf(p, "%ld ", dev->drv[i]->online);
--			p = istatbuf + strlen(istatbuf);
-+			p += sprintf(p, "%ld ", dev->drv[i]->online);
- 		} else {
--			sprintf(p, "? ");
--			p = istatbuf + strlen(istatbuf);
-+			p += sprintf(p, "? ");
- 		}
- 	}
--	sprintf(p, "\nphone:\t");
--	p = istatbuf + strlen(istatbuf);
-+	p += sprintf(p, "\nphone:\t");
- 	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
--		sprintf(p, "%s ", dev->num[i]);
--		p = istatbuf + strlen(istatbuf);
-+		p += sprintf(p, "%s ", dev->num[i]);
- 	}
--	sprintf(p, "\n");
--	return istatbuf;
-+	p += sprintf(p, "\n");
- }
- 
--/* Module interface-code */
-+static ssize_t
-+isdnstatus_read(struct file *file, char *buf, size_t count, loff_t * off)
-+{
-+	static DECLARE_MUTEX(istatbuf_mutex);
-+	static char istatbuf[2048];
- 
--void
--isdn_info_update(void)
-+        DECLARE_WAITQUEUE(wait, current);
-+	struct isdnstatus_dev *idev;
-+	int retval = 0;
-+	unsigned int len;
-+
-+	idev = file->private_data;
-+
-+	if (off != &file->f_pos)
-+		return -ESPIPE;
-+
-+        add_wait_queue(&isdnstatus_waitq, &wait);
-+        for (;;) {
-+                set_current_state(TASK_INTERRUPTIBLE);
-+                
-+		if (idev->update)
-+                        break;
-+
-+                retval = -EAGAIN;
-+                if (file->f_flags & O_NONBLOCK)
-+                        break;
-+
-+                retval = -ERESTARTSYS;
-+                if (signal_pending(current))
-+                        break;
-+
-+                schedule();
-+        }
-+        __set_current_state(TASK_RUNNING);
-+        remove_wait_queue(&isdnstatus_waitq, &wait);
-+
-+	if (!idev->update)
-+		goto out;
-+
-+	idev->update = 0;
-+	down(&istatbuf_mutex);
-+	isdn_statstr(istatbuf);
-+	len = strlen(istatbuf);
-+	if (len > count) {
-+		retval = 0;
-+		goto out_unlock;
-+	}
-+	if (copy_to_user(buf, istatbuf, len)) {
-+		retval = -EFAULT;
-+		goto out_unlock;
-+	}
-+	*off += len;
-+	retval = len;
-+
-+ out_unlock:
-+	up(&istatbuf_mutex);
-+ out:
-+	return retval;
-+}
-+
-+static ssize_t
-+isdnstatus_write(struct file *file, const char *buf, size_t count, loff_t * off)
- {
--	infostruct *p = dev->infochain;
-+	return -EINVAL;
-+}
-+
-+static unsigned int
-+isdnstatus_poll(struct file *file, poll_table * wait)
-+{
-+	struct isdnstatus_dev *idev;
-+	unsigned int mask = 0;
-+
-+	idev = file->private_data;
- 
--	while (p) {
--		*(p->private) = 1;
--		p = (infostruct *) p->next;
-+	poll_wait(file, &isdnstatus_waitq, wait);
-+	if (idev->update) {
-+		mask |= POLLIN | POLLRDNORM;
- 	}
--	wake_up_interruptible(&(dev->info_waitq));
-+	return mask;
- }
- 
-+static int
-+isdnstatus_ioctl(struct inode *inode, struct file *file, uint cmd, ulong arg)
-+{
-+	int retval;
-+	isdn_net_ioctl_phone phone;
-+
-+	switch (cmd) {
-+	case IIOCGETDVR:
-+		return (TTY_DV +
-+			(NET_DV << 8) +
-+			(INF_DV << 16));
-+	case IIOCGETCPS:
-+		if (arg) {
-+			ulong *p = (ulong *) arg;
-+			int i;
-+			if ((retval = verify_area(VERIFY_WRITE, (void *) arg,
-+					       sizeof(ulong) * ISDN_MAX_CHANNELS * 2)))
-+				return retval;
-+			for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
-+				put_user(dev->ibytes[i], p++);
-+				put_user(dev->obytes[i], p++);
-+			}
-+			return 0;
-+		} else
-+			return -EINVAL;
-+		break;
-+#ifdef CONFIG_NETDEVICES
-+	case IIOCNETGPN:
-+		/* Get peer phone number of a connected 
-+		 * isdn network interface */
-+		if (arg) {
-+			if (copy_from_user((char *) &phone, (char *) arg, sizeof(phone)))
-+				return -EFAULT;
-+			return isdn_net_getpeer(&phone, (isdn_net_ioctl_phone *) arg);
-+		} else
-+			return -EINVAL;
-+#endif
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+// ----------------------------------------------------------------------
-+
-+
- static ssize_t
- isdn_read(struct file *file, char *buf, size_t count, loff_t * off)
- {
-@@ -976,37 +1149,16 @@
- 	int chidx;
- 	int retval;
- 	char *p;
--	loff_t pos = *off;
- 
- 	if (off != &file->f_pos)
- 		return -ESPIPE;
- 
--	if (pos != (unsigned) pos)
--		return -EINVAL;
--
-+#ifndef COMPAT_HAVE_READ_LOCK_KERNEL
- 	lock_kernel();
--	if (minor == ISDN_MINOR_STATUS) {
--		if (!file->private_data) {
--			if (file->f_flags & O_NONBLOCK) {
--				retval = -EAGAIN;
--				goto out;
--			}
--			interruptible_sleep_on(&(dev->info_waitq));
--		}
--		p = isdn_statstr();
--		file->private_data = 0;
--		if ((len = strlen(p)) <= count) {
--			if (copy_to_user(buf, p, len)) {
--				retval = -EFAULT;
--				goto out;
--			}
--			*off = pos + len;
--			retval = len;
--			goto out;
--		}
--		retval = 0;
--		goto out;
--	}
-+#endif
-+	if (minor == ISDN_MINOR_STATUS)
-+		return isdnstatus_read(file, buf, count, off);
-+	  
- 	if (!dev->drivers) {
- 		retval = -ENODEV;
- 		goto out;
-@@ -1031,7 +1183,7 @@
- 		cli();
- 		len = isdn_readbchan(drvidx, chidx, p, 0, count,
- 				     &dev->drv[drvidx]->rcv_waitq[chidx]);
--		*off = pos + len;
-+		*off += len;
- 		restore_flags(flags);
- 		if (copy_to_user(buf,p,len)) 
- 			len = -EFAULT;
-@@ -1052,6 +1204,9 @@
- 			}
- 			interruptible_sleep_on(&(dev->drv[drvidx]->st_waitq));
- 		}
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+		if(drvidx || (len = isdn_dw_abc_lcr_readstat(buf,count)) < 1) {
-+#endif
- 		if (dev->drv[drvidx]->interface->readstat) {
- 			if (count > dev->drv[drvidx]->stavail)
- 				count = dev->drv[drvidx]->stavail;
-@@ -1061,6 +1216,9 @@
- 		} else {
- 			len = 0;
- 		}
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+		}
-+#endif
- 		save_flags(flags);
- 		cli();
- 		if (len)
-@@ -1068,7 +1226,7 @@
- 		else
- 			dev->drv[drvidx]->stavail = 0;
- 		restore_flags(flags);
--		*off = pos + len;
-+		*off += len;
- 		retval = len;
- 		goto out;
- 	}
-@@ -1080,7 +1238,9 @@
- #endif
- 	retval = -ENODEV;
-  out:
-+#ifndef COMPAT_HAVE_READ_LOCK_KERNEL
- 	unlock_kernel();
-+#endif
- 	return retval;
- }
- 
-@@ -1092,15 +1252,18 @@
- 	int chidx;
- 	int retval;
- 
-+	if (minor == ISDN_MINOR_STATUS)
-+		return isdnstatus_write(file, buf, count, off);
-+
- 	if (off != &file->f_pos)
- 		return -ESPIPE;
- 
--	if (minor == ISDN_MINOR_STATUS)
--		return -EPERM;
- 	if (!dev->drivers)
- 		return -ENODEV;
- 
-+#ifndef COMPAT_HAVE_WRITE_LOCK_KERNEL
- 	lock_kernel();
-+#endif
- 	if (minor <= ISDN_MINOR_BMAX) {
- 		printk(KERN_WARNING "isdn_write minor %d obsolete!\n", minor);
- 		drvidx = isdn_minor2drv(minor);
-@@ -1145,7 +1308,9 @@
- #endif
- 	retval = -ENODEV;
-  out:
-+#ifndef COMPAT_HAVE_WRITE_LOCK_KERNEL
- 	unlock_kernel();
-+#endif
- 	return retval;
- }
- 
-@@ -1156,15 +1321,12 @@
- 	unsigned int minor = MINOR(file->f_dentry->d_inode->i_rdev);
- 	int drvidx = isdn_minor2drv(minor - ISDN_MINOR_CTRL);
- 
-+#ifndef COMPAT_HAVE_POLL_LOCK_KERNEL
- 	lock_kernel();
--	if (minor == ISDN_MINOR_STATUS) {
--		poll_wait(file, &(dev->info_waitq), wait);
--		/* mask = POLLOUT | POLLWRNORM; */
--		if (file->private_data) {
--			mask |= POLLIN | POLLRDNORM;
--		}
--		goto out;
--	}
-+#endif
-+	if (minor == ISDN_MINOR_STATUS)
-+ 		return isdnstatus_poll(file, wait);
-+
- 	if (minor >= ISDN_MINOR_CTRL && minor <= ISDN_MINOR_CTRLMAX) {
- 		if (drvidx < 0) {
- 			/* driver deregistered while file open */
-@@ -1186,7 +1348,9 @@
- #endif
- 	mask = POLLERR;
-  out:
-+#ifndef COMPAT_HAVE_POLL_LOCK_KERNEL
- 	unlock_kernel();
-+#endif
- 	return mask;
- }
- 
-@@ -1216,42 +1380,9 @@
- #define phone iocpar.phone
- #define cfg   iocpar.cfg
- 
--	if (minor == ISDN_MINOR_STATUS) {
--		switch (cmd) {
--			case IIOCGETDVR:
--				return (TTY_DV +
--					(NET_DV << 8) +
--					(INF_DV << 16));
--			case IIOCGETCPS:
--				if (arg) {
--					ulong *p = (ulong *) arg;
--					int i;
--					if ((ret = verify_area(VERIFY_WRITE, (void *) arg,
--							       sizeof(ulong) * ISDN_MAX_CHANNELS * 2)))
--						return ret;
--					for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
--						put_user(dev->ibytes[i], p++);
--						put_user(dev->obytes[i], p++);
--					}
--					return 0;
--				} else
--					return -EINVAL;
--				break;
--#ifdef CONFIG_NETDEVICES
--			case IIOCNETGPN:
--				/* Get peer phone number of a connected 
--				 * isdn network interface */
--				if (arg) {
--					if (copy_from_user((char *) &phone, (char *) arg, sizeof(phone)))
--						return -EFAULT;
--					return isdn_net_getpeer(&phone, (isdn_net_ioctl_phone *) arg);
--				} else
--					return -EINVAL;
--#endif
--			default:
--				return -EINVAL;
--		}
--	}
-+	if (minor == ISDN_MINOR_STATUS)
-+		return isdnstatus_ioctl(inode, file, cmd, arg);
-+
- 	if (!dev->drivers)
- 		return -ENODEV;
- 	if (minor <= ISDN_MINOR_BMAX) {
-@@ -1273,11 +1404,34 @@
-  */
- 		switch (cmd) {
- 			case IIOCNETDWRSET:
-+#ifdef CONFIG_ISDN_WITH_ABC
-+				if (arg) {
-+
-+					if (copy_from_user(name, (char *) arg, sizeof(name))) {
-+
-+						return(-EFAULT);
-+
-+					} else {
-+
-+						isdn_net_dev *p = isdn_net_findif(name);
-+
-+						if(p == NULL)
-+							return(-EINVAL);
-+
-+						return(isdn_dw_abc_reset_interface(p->local,1));
-+					}
-+				} 
-+#else
- 				printk(KERN_INFO "INFO: ISDN_DW_ABC_EXTENSION not enabled\n");
-+#endif
- 				return(-EINVAL);
- 			case IIOCNETLCR:
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+				return(isdn_dw_abc_lcr_ioctl(arg));
-+#else
- 				printk(KERN_INFO "INFO: ISDN_ABC_LCR_SUPPORT not enabled\n");
- 				return -ENODEV;
-+#endif
- #ifdef CONFIG_NETDEVICES
- 			case IIOCNETAIF:
- 				/* Add a network-interface */
-@@ -1650,22 +1804,12 @@
- 	int chidx;
- 	int retval = -ENODEV;
- 
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+	MOD_INC_USE_COUNT;
-+#endif
- 
- 	if (minor == ISDN_MINOR_STATUS) {
--		infostruct *p;
--
--		if ((p = kmalloc(sizeof(infostruct), GFP_KERNEL))) {
--			p->next = (char *) dev->infochain;
--			p->private = (char *) &(filep->private_data);
--			dev->infochain = p;
--			/* At opening we allow a single update */
--			filep->private_data = (char *) 1;
--			retval = 0;
--			goto out;
--		} else {
--			retval = -ENOMEM;
--			goto out;
--		}
-+		return isdnstatus_open(ino, filep);
- 	}
- 	if (!dev->channels)
- 		goto out;
-@@ -1688,6 +1832,9 @@
- 		if (drvidx < 0)
- 			goto out;
- 		isdn_lock_drivers();
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+		if(!drvidx) isdn_dw_abc_lcr_open();
-+#endif
- 		retval = 0;
- 		goto out;
- 	}
-@@ -1700,6 +1847,10 @@
- 	}
- #endif
-  out:
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+	if (retval)
-+		MOD_DEC_USE_COUNT;
-+#endif
- 	return retval;
- }
- 
-@@ -1708,25 +1859,11 @@
- {
- 	uint minor = MINOR(ino->i_rdev);
- 
-+#ifndef COMPAT_USE_MODCOUNT_LOCK
- 	lock_kernel();
-+#endif
- 	if (minor == ISDN_MINOR_STATUS) {
--		infostruct *p = dev->infochain;
--		infostruct *q = NULL;
--
--		while (p) {
--			if (p->private == (char *) &(filep->private_data)) {
--				if (q)
--					q->next = p->next;
--				else
--					dev->infochain = (infostruct *) (p->next);
--				kfree(p);
--				goto out;
--			}
--			q = p;
--			p = (infostruct *) (p->next);
--		}
--		printk(KERN_WARNING "isdn: No private data while closing isdnctrl\n");
--		goto out;
-+		isdnstatus_close(ino, filep);
- 	}
- 	isdn_unlock_drivers();
- 	if (minor <= ISDN_MINOR_BMAX)
-@@ -1734,6 +1871,12 @@
- 	if (minor <= ISDN_MINOR_CTRLMAX) {
- 		if (dev->profd == current)
- 			dev->profd = NULL;
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+		{
-+			int drvidx = isdn_minor2drv(minor - ISDN_MINOR_CTRL);
-+			if(!drvidx) isdn_dw_abc_lcr_close();
-+		}
-+#endif
- 		goto out;
- 	}
- #ifdef CONFIG_ISDN_PPP
-@@ -1742,13 +1885,19 @@
- #endif
- 
-  out:
-+#ifdef COMPAT_USE_MODCOUNT_LOCK
-+	MOD_DEC_USE_COUNT;
-+#else
- 	unlock_kernel();
-+#endif
- 	return 0;
- }
- 
- static struct file_operations isdn_fops =
- {
-+#ifdef COMPAT_HAS_FILEOP_OWNER
- 	owner:		THIS_MODULE,
-+#endif
- 	llseek:		no_llseek,
- 	read:		isdn_read,
- 	write:		isdn_write,
-@@ -1801,6 +1950,15 @@
- 		if (USG_NONE(dev->usage[i]) &&
- 		    (dev->drvmap[i] != -1)) {
- 			int d = dev->drvmap[i];
-+#ifdef CONFIG_ISDN_WITH_ABC_CH_EXTINUSE
-+			if(jiffies < dev->dwabc_chan_external_inuse[i]) {
-+
-+				if((dev->dwabc_chan_external_inuse[i] - jiffies) > (HZ * 120))
-+					dev->dwabc_chan_external_inuse[i] = 0;
-+				else 
-+					continue;
-+			}
-+#endif
- 			if ((dev->usage[i] & ISDN_USAGE_EXCLUSIVE) &&
- 			((pre_dev != d) || (pre_chan != dev->chanmap[i])))
- 				continue;
-@@ -1819,7 +1977,11 @@
- 						restore_flags(flags);
- 						return i;
- 					} else {
-+#ifdef CONFIG_ISDN_WITH_ABC
-+						if ((pre_dev == d) && ((pre_chan == dev->chanmap[i]) || pre_chan > 1000)) {
-+#else
- 						if ((pre_dev == d) && (pre_chan == dev->chanmap[i])) {
-+#endif
- 							dev->usage[i] &= ISDN_USAGE_EXCLUSIVE;
- 							dev->usage[i] |= usage;
- 							isdn_info_update();
-@@ -2006,7 +2168,7 @@
- 
- 	if ((adding) && (d->rcverr))
- 		kfree(d->rcverr);
--	if (!(d->rcverr = kmalloc(sizeof(int) * m, GFP_KERNEL))) {
-+	if (!(d->rcverr = (int *) kmalloc(sizeof(int) * m, GFP_KERNEL))) {
- 		printk(KERN_WARNING "register_isdn: Could not alloc rcverr\n");
- 		return -1;
- 	}
-@@ -2014,7 +2176,7 @@
- 
- 	if ((adding) && (d->rcvcount))
- 		kfree(d->rcvcount);
--	if (!(d->rcvcount = kmalloc(sizeof(int) * m, GFP_KERNEL))) {
-+	if (!(d->rcvcount = (int *) kmalloc(sizeof(int) * m, GFP_KERNEL))) {
- 		printk(KERN_WARNING "register_isdn: Could not alloc rcvcount\n");
- 		if (!adding) kfree(d->rcverr);
- 		return -1;
-@@ -2026,7 +2188,8 @@
- 			skb_queue_purge(&d->rpqueue[j]);
- 		kfree(d->rpqueue);
- 	}
--	if (!(d->rpqueue = kmalloc(sizeof(struct sk_buff_head) * m, GFP_KERNEL))) {
-+	if (!(d->rpqueue =
-+	      (struct sk_buff_head *) kmalloc(sizeof(struct sk_buff_head) * m, GFP_KERNEL))) {
- 		printk(KERN_WARNING "register_isdn: Could not alloc rpqueue\n");
- 		if (!adding) {
- 			kfree(d->rcvcount);
-@@ -2040,7 +2203,8 @@
- 
- 	if ((adding) && (d->rcv_waitq))
- 		kfree(d->rcv_waitq);
--	d->rcv_waitq = kmalloc(sizeof(wait_queue_head_t) * 2 * m, GFP_KERNEL);
-+	d->rcv_waitq = (wait_queue_head_t *)
-+		kmalloc(sizeof(wait_queue_head_t) * 2 * m, GFP_KERNEL);
- 	if (!d->rcv_waitq) {
- 		printk(KERN_WARNING "register_isdn: Could not alloc rcv_waitq\n");
- 		if (!adding) {
-@@ -2064,7 +2228,9 @@
- 			if (dev->chanmap[k] < 0) {
- 				dev->chanmap[k] = j;
- 				dev->drvmap[k] = drvidx;
-+#ifdef HAVE_DEVFS_FS
- 				isdn_register_devfs(k);
-+#endif /* HAVE_DEVFS_FS */
- 				break;
- 			}
- 	restore_flags(flags);
-@@ -2128,6 +2294,7 @@
-         i_div->ll_cmd = isdn_command; /* set command function */
-         i_div->drv_to_name = map_drvname; 
-         i_div->name_to_drv = map_namedrv; 
-+        i_div->dial_net_name = isdn_net_force_dial; 
-         MOD_INC_USE_COUNT;
-         divert_if = i_div; /* remember interface */
-         return(DIVERT_NO_ERR);
-@@ -2165,7 +2332,7 @@
- 		printk(KERN_WARNING "register_isdn: No write routine given.\n");
- 		return 0;
- 	}
--	if (!(d = kmalloc(sizeof(driver), GFP_KERNEL))) {
-+	if (!(d = (driver *) kmalloc(sizeof(driver), GFP_KERNEL))) {
- 		printk(KERN_WARNING "register_isdn: Could not alloc driver-struct\n");
- 		return 0;
- 	}
-@@ -2225,6 +2392,7 @@
- 	return rev;
- }
- 
-+#ifdef HAVE_DEVFS_FS
- #ifdef CONFIG_DEVFS_FS
- 
- static devfs_handle_t devfs_handle;
-@@ -2314,6 +2482,7 @@
- }
- 
- #endif  /* CONFIG_DEVFS_FS */
-+#endif /* HAVE_DEVFS_FS */
- 
- /*
-  * Allocate and initialize all data, register modem-devices
-@@ -2331,7 +2500,6 @@
- 	init_timer(&dev->timer);
- 	dev->timer.function = isdn_timer_funct;
- 	init_MUTEX(&dev->sem);
--	init_waitqueue_head(&dev->info_waitq);
- 	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
- 		dev->drvmap[i] = -1;
- 		dev->chanmap[i] = -1;
-@@ -2345,7 +2513,9 @@
- 		vfree(dev);
- 		return -EIO;
- 	}
-+#ifdef HAVE_DEVFS_FS
- 	isdn_init_devfs();
-+#endif /* HAVE_DEVFS_FS */
- 	if ((i = isdn_tty_modem_init()) < 0) {
- 		printk(KERN_WARNING "isdn: Could not register tty devices\n");
- 		if (i == -3)
-@@ -2353,7 +2523,9 @@
- 		if (i <= -2)
- 			tty_unregister_driver(&dev->mdm.tty_modem);
- 		vfree(dev);
-+#ifdef HAVE_DEVFS_FS
- 		isdn_cleanup_devfs();
-+#endif /* HAVE_DEVFS_FS */
- 		devfs_unregister_chrdev(ISDN_MAJOR, "isdn");
- 		return -EIO;
- 	}
-@@ -2364,7 +2536,9 @@
- 		tty_unregister_driver(&dev->mdm.cua_modem);
- 		for (i = 0; i < ISDN_MAX_CHANNELS; i++)
- 			kfree(dev->mdm.info[i].xmit_buf - 4);
-+#ifdef HAVE_DEVFS_FS
- 		isdn_cleanup_devfs();
-+#endif /* HAVE_DEVFS_FS */
- 		devfs_unregister_chrdev(ISDN_MAJOR, "isdn");
- 		vfree(dev);
- 		return -EIO;
-@@ -2390,6 +2564,9 @@
- 	printk("\n");
- #endif
- 	isdn_info_update();
-+#ifdef CONFIG_ISDN_WITH_ABC
-+	isdn_dw_abc_init_func();
-+#endif
- 	return 0;
- }
- 
-@@ -2398,7 +2575,7 @@
-  */
- static void __exit isdn_exit(void)
- {
--	unsigned long flags;
-+	int flags;
- 	int i;
- 
- #ifdef CONFIG_ISDN_PPP
-@@ -2432,13 +2609,18 @@
- 		printk(KERN_WARNING "isdn: controldevice busy, remove cancelled\n");
- 		restore_flags(flags);
- 	} else {
-+#ifdef HAVE_DEVFS_FS
- 		isdn_cleanup_devfs();
-+#endif /* HAVE_DEVFS_FS */
- 		del_timer(&dev->timer);
- 		restore_flags(flags);
- 		/* call vfree with interrupts enabled, else it will hang */
- 		vfree(dev);
- 		printk(KERN_NOTICE "ISDN-subsystem unloaded\n");
- 	}
-+#ifdef CONFIG_ISDN_WITH_ABC
-+	isdn_dw_abc_release_func();
-+#endif
- }
- 
- module_init(isdn_init);
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_common.h linux-2.4.29/drivers/isdn/isdn_common.h
---- linux-2.4.29.old/drivers/isdn/isdn_common.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_common.h	2005-03-22 15:06:44.374346856 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_common.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_common.h,v 1.22 2001/09/24 13:22:42 kai Exp $
-  *
-  * header for Linux ISDN subsystem
-  * common used functions and debugging-switches (linklevel).
-@@ -24,6 +24,9 @@
- #undef  ISDN_DEBUG_NET_DIAL
- #undef  ISDN_DEBUG_NET_ICALL
- 
-+#ifdef CONFIG_ISDN_WITH_ABC
-+int isdn_net_force_dial_lp(isdn_net_local *);
-+#endif
- /* Prototypes */
- extern void isdn_MOD_INC_USE_COUNT(void);
- extern void isdn_MOD_DEC_USE_COUNT(void);
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_concap.c linux-2.4.29/drivers/isdn/isdn_concap.c
---- linux-2.4.29.old/drivers/isdn/isdn_concap.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_concap.c	2005-03-22 15:06:44.389344576 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_concap.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_concap.c,v 1.9 2001/09/24 13:22:42 kai Exp $
-  * 
-  * Linux ISDN subsystem, protocol encapsulation
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_concap.h linux-2.4.29/drivers/isdn/isdn_concap.h
---- linux-2.4.29.old/drivers/isdn/isdn_concap.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_concap.h	2005-03-22 15:06:44.405342144 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_concap.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_concap.h,v 1.4 2001/09/24 13:22:42 kai Exp $
-  *
-  * Linux ISDN subsystem, protocol encapsulation
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_dwabc.c linux-2.4.29/drivers/isdn/isdn_dwabc.c
---- linux-2.4.29.old/drivers/isdn/isdn_dwabc.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_dwabc.c	2005-03-22 15:06:44.421339712 +0100
-@@ -0,0 +1,1053 @@
-+
-+/* $Id: isdn_dwabc.c,v 1.27 2001/12/01 23:18:21 detabc Exp $
-+
-+ * Linux ISDN subsystem, abc-extension releated funktions.
-+ *
-+ * Copyright           by abc GmbH
-+ *                     written by Detlef Wengorz <detlefw@isdn4linux.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2, or (at your option)
-+ * any later version.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#define __NO_VERSION__
-+
-+#ifdef CONFIG_ISDN_WITH_ABC
-+
-+static char *dwabcrevison = "$Revision: 1.27 $";
-+
-+#include <asm/semaphore.h>
-+#define CONFIG_ISDN_WITH_ABC_NEED_DWSJIFFIES 	1
-+#include <linux/list.h>
-+#include <linux/isdn.h>
-+#include "isdn_common.h"
-+#include "isdn_net.h"
-+
-+#include <linux/skbuff.h>
-+
-+#include <net/udp.h>
-+#include <net/checksum.h>
-+#include <linux/isdn_dwabc.h>
-+
-+
-+#if CONFIG_ISDN_WITH_ABC_RAWIPCOMPRESS && CONFIG_ISDN_PPP
-+#include <linux/isdn_ppp.h>
-+extern struct isdn_ppp_compressor *isdn_ippp_comp_head;
-+#define ipc_head isdn_ippp_comp_head
-+#ifndef CI_BSD_COMPRESS
-+#define CI_BSD_COMPRESS 21
-+#endif
-+#endif
-+
-+#define NBYTEORDER_30BYTES      0x1e00 
-+#define DWABC_TMRES (HZ / 10)
-+
-+#define VERBLEVEL (dev->net_verbose > 2)
-+
-+static struct timer_list dw_abc_timer;
-+
-+
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+static ISDN_DWSPINLOCK lcr_spin = ISDN_DWSPIN_UNLOCKED;
-+#define LCR_LOCK() isdn_dwspin_trylock(&lcr_spin)
-+#define LCR_ULOCK() isdn_dwspin_unlock(&lcr_spin)
-+
-+typedef struct ISDN_DW_ABC_LCR {
-+
-+	struct list_head dll;
-+	char lcr_printbuf[64 + ISDN_MSNLEN + ISDN_MSNLEN];
-+	char *lcr_poin;
-+	char *lcr_epoin;
-+
-+} ISDN_DW_ABC_LCR;
-+
-+static LIST_HEAD(lcr_dll);
-+static atomic_t lcr_open_count		=	ATOMIC_INIT(0);
-+static volatile  ulong lcr_call_counter	= 0;
-+
-+
-+static int myjiftime(char *p,u_long nj)
-+{
-+	sprintf(p,"%02ld:%02ld.%02ld",
-+		((nj / 100) / 60) % 100, (nj / 100) % 60,nj % 100);
-+
-+	return(8);
-+}
-+
-+
-+static void dw_lcr_clear_all(void)
-+{
-+	struct list_head *lh;
-+
-+	if(!LCR_LOCK()) {
-+
-+		while((lh = lcr_dll.next) != &lcr_dll) {
-+
-+			ISDN_DW_ABC_LCR *p = list_entry(lh,ISDN_DW_ABC_LCR,dll);
-+			list_del(&p->dll);
-+			kfree(p);
-+		}
-+
-+		LCR_ULOCK();
-+	}
-+}
-+
-+void isdn_dw_abc_lcr_open(void) 
-+{ atomic_inc(&lcr_open_count); }
-+
-+void isdn_dw_abc_lcr_close(void) 
-+{ 
-+	if(atomic_dec_and_test(&lcr_open_count))
-+		dw_lcr_clear_all();
-+}
-+
-+int isdn_dw_abc_lcr_lock(void) 
-+{ return(LCR_LOCK()); }
-+
-+void isdn_dw_abc_lcr_ulock(void) 
-+{ LCR_ULOCK(); }
-+
-+
-+size_t isdn_dw_abc_lcr_readstat(char *buf,size_t count) 
-+{
-+	size_t  retw = 0;
-+
-+	while(buf != NULL && count > 0) {
-+
-+		struct list_head *lh = NULL;
-+		ISDN_DW_ABC_LCR *p = NULL;
-+		char *dp = NULL;
-+		size_t  n;
-+
-+		if((n = LCR_LOCK())) {
-+
-+			if(!retw)
-+				retw = n;
-+
-+			break;
-+		}
-+
-+
-+		while((lh = lcr_dll.next) != &lcr_dll) {
-+
-+			p = list_entry(lh,ISDN_DW_ABC_LCR,dll);
-+
-+			if(p->lcr_poin >= p->lcr_epoin) {
-+
-+				list_del(&p->dll);
-+				kfree(p);
-+				p = NULL;
-+
-+			} else break;
-+		}
-+
-+		if(p == NULL) {
-+				
-+			LCR_ULOCK();
-+			break;
-+		}
-+
-+		n = p->lcr_epoin - p->lcr_poin;
-+
-+		if(n > count)
-+			n = count;
-+
-+		dp = p->lcr_poin;
-+		p->lcr_poin += n;
-+		retw += n;
-+		LCR_ULOCK();
-+		copy_to_user(buf,dp,n);
-+		buf += n;
-+	}
-+
-+	return(retw);
-+}
-+
-+
-+static void isdn_dw_abc_lcr_clear_helper(isdn_net_local *lp)
-+{
-+	if(lp != NULL) {
-+
-+		void *a,*b;
-+
-+		a = lp->dw_abc_lcr_cmd;  
-+		b = lp->dw_abc_lcr_io;
-+		lp->dw_abc_lcr_io = NULL;
-+		lp->dw_abc_lcr_cmd = NULL;
-+		lp->dw_abc_lcr_callid = 
-+		lp->dw_abc_lcr_start_request =
-+		lp->dw_abc_lcr_end_request = 0;
-+		
-+		if(a) kfree(a);
-+		if(b) kfree(b);
-+	}
-+}
-+
-+void isdn_dw_abc_lcr_clear(isdn_net_local *lp)
-+{
-+	if(!LCR_LOCK()) {
-+		isdn_dw_abc_lcr_clear_helper(lp);
-+		LCR_ULOCK();
-+	}
-+}
-+
-+
-+u_long isdn_dw_abc_lcr_call_number( isdn_net_local *lp,isdn_ctrl *call_cmd)
-+{
-+	u_long mid = 0;
-+
-+	if(LCR_LOCK())
-+		return(0);
-+
-+	isdn_dw_abc_lcr_clear_helper(lp);
-+
-+	if( atomic_read(&lcr_open_count) > 0 && 
-+		lp != NULL 						&& 
-+		call_cmd != NULL) {
-+
-+		ISDN_DW_ABC_LCR  *lc = NULL;
-+		int ab = 0;
-+
-+		if((lp->dw_abc_lcr_cmd = 
-+			( isdn_ctrl *)kmalloc(sizeof(isdn_ctrl),GFP_ATOMIC)) == NULL) {
-+
-+no_mem_out:;
-+			isdn_dw_abc_lcr_clear_helper(lp);
-+			LCR_ULOCK();
-+			printk(KERN_DEBUG "%s %d : LCR no memory\n",__FILE__,__LINE__);
-+			return(0);
-+		}
-+
-+		memcpy(lp->dw_abc_lcr_cmd,call_cmd,sizeof(*call_cmd));
-+		while(!(lp->dw_abc_lcr_callid = mid = lcr_call_counter++));
-+		
-+		lp->dw_abc_lcr_end_request = lp->dw_abc_lcr_start_request = jiffies;
-+		lp->dw_abc_lcr_end_request += HZ * 3;
-+
-+		if((lc = (ISDN_DW_ABC_LCR  *)kmalloc(sizeof(*lc),GFP_KERNEL)) == NULL)
-+			goto no_mem_out;
-+
-+		lc->lcr_poin = lc->lcr_epoin = lc->lcr_printbuf;
-+		lc->lcr_epoin += myjiftime(lc->lcr_epoin,jiffies);
-+
-+		sprintf(lc->lcr_epoin," DW_ABC_LCR\t%lu\t%.*s\t%.*s\n",
-+			mid,
-+			(int)ISDN_MSNLEN,
-+			call_cmd->parm.setup.eazmsn,
-+			(int)ISDN_MSNLEN,
-+			call_cmd->parm.setup.phone);
-+
-+		lc->lcr_epoin += strlen(lc->lcr_epoin);
-+		ab = lc->lcr_epoin - lc->lcr_poin;
-+
-+		list_add_tail(&lc->dll,&lcr_dll);
-+		LCR_ULOCK();
-+
-+		if(ab > 0) {
-+
-+			if(dev->drv[0] != NULL ) {
-+
-+				dev->drv[0]->stavail += ab;
-+				wake_up_interruptible(&dev->drv[0]->st_waitq);
-+			}
-+		}
-+
-+	} else LCR_ULOCK();
-+
-+	return(mid);
-+}
-+
-+
-+int isdn_dw_abc_lcr_ioctl(u_long arg)
-+{
-+	struct ISDN_DWABC_LCR_IOCTL	i;
-+	int need = sizeof(struct ISDN_DWABC_LCR_IOCTL); 
-+	isdn_net_dev *p; 
-+
-+	memset(&i,0,sizeof(struct ISDN_DWABC_LCR_IOCTL));
-+	copy_from_user(&i,(char *)arg,sizeof(int));
-+
-+	if(i.lcr_ioctl_sizeof < need)
-+		need = i.lcr_ioctl_sizeof;
-+
-+	if(need > 0) 
-+		copy_from_user(&i,(char *)arg,need);
-+
-+	 if(LCR_LOCK())
-+	 	return(-EAGAIN);
-+
-+	 p = dev->netdev; 
-+
-+	 for(;p ; p = p->next) {
-+
-+	 	isdn_net_local *lp = p->local;
-+
-+	 	if(	lp->dw_abc_lcr_callid != i.lcr_ioctl_callid)
-+			continue;
-+
-+		if(lp->dw_abc_lcr_cmd == NULL) 
-+			continue;
-+
-+		if(lp->dw_abc_lcr_io == NULL)
-+			lp->dw_abc_lcr_io = (struct ISDN_DWABC_LCR_IOCTL *)
-+				kmalloc(sizeof(struct ISDN_DWABC_LCR_IOCTL),GFP_ATOMIC);
-+
-+		if(lp->dw_abc_lcr_io == NULL) {
-+
-+			printk(KERN_DEBUG "%s %d : no memory\n",__FILE__,__LINE__);
-+			continue;
-+		}
-+
-+		memcpy(lp->dw_abc_lcr_io,&i,sizeof(struct ISDN_DWABC_LCR_IOCTL));
-+
-+		if(i.lcr_ioctl_flags & DWABC_LCR_FLG_NEWNUMBER) {
-+
-+			char *xx = i.lcr_ioctl_nr;
-+			char *exx = xx + sizeof(i.lcr_ioctl_nr);
-+			char *d = lp->dw_abc_lcr_cmd->parm.setup.phone;
-+			char *ed = d + sizeof(lp->dw_abc_lcr_cmd->parm.setup.phone) - 1;
-+
-+			while(d < ed && xx < exx && *xx) *(d++) = *(xx++);
-+			while(d < ed) *(d++) = 0;
-+			*d = 0;
-+		}
-+	 }
-+
-+	 LCR_ULOCK();
-+	 return(0);
-+}
-+
-+#endif
-+
-+
-+#ifdef CONFIG_ISDN_WITH_ABC_UDP_CHECK
-+int dw_abc_udp_test(struct sk_buff *skb,struct net_device *ndev)
-+{
-+	if(ndev != NULL && skb != NULL && skb->protocol == htons(ETH_P_IP)) {
-+
-+		struct iphdr *iph = (struct iphdr *)skb->data;
-+		isdn_net_local *lp = (isdn_net_local *) ndev->priv;
-+		int rklen = skb->len;
-+
-+		if (skb->nh.raw > skb->data && skb->nh.raw < skb->tail) {
-+
-+			rklen -= (char *)skb->nh.raw - (char *)skb->data;
-+			iph = (struct iphdr *)skb->nh.raw;
-+		}
-+
-+		if(rklen >= 20 && iph->version == 4 && 
-+			!(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_NO_UDP_CHECK)) {
-+
-+			if(	iph->tot_len == NBYTEORDER_30BYTES	&& 
-+				iph->protocol == IPPROTO_UDP) {
-+
-+				struct udphdr *udp = 
-+					(struct udphdr *)((char *)iph + (iph->ihl << 2));
-+
-+				ushort usrc = ntohs(udp->source);
-+
-+				if(	udp->dest == htons(25001) && 
-+					usrc >= 20000 && usrc < 25000) {
-+
-+					char *p = (char *)(udp + 1);
-+
-+					if(p[0] == p[1]) {
-+
-+						char mc = 0;
-+
-+						switch(*p) {
-+						case 0x30:
-+
-+							mc = *p;
-+
-+							if((lp->flags & ISDN_NET_CONNECTED) && (!lp->dialstate))
-+								mc++;
-+
-+							break;
-+
-+						case 0x32:
-+
-+							mc = *p;
-+#ifdef CONFIG_ISDN_WITH_ABC_UDP_CHECK_DIAL
-+							if((lp->flags & ISDN_NET_CONNECTED) && (!lp->dialstate)) {
-+
-+								mc++;
-+								break;
-+							}
-+
-+							if(!isdn_net_force_dial_lp(lp)) mc++;
-+#endif
-+							break;
-+
-+						case 0x11:
-+							mc = *p + 1;
-+							isdn_dw_abc_reset_interface(lp,1);
-+							break;
-+
-+						case 0x28:	mc = *p + 1;	break;
-+						case 0x2a:
-+						case 0x2c:
-+
-+							mc = *p;
-+#ifdef CONFIG_ISDN_WITH_ABC_UDP_CHECK_HANGUP
-+							if(!(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_NO_UDP_HANGUP)) {
-+
-+								if(lp->isdn_device >= 0) {
-+
-+									isdn_net_hangup(ndev);
-+									mc = *p + 1;
-+								}
-+							}
-+#endif
-+							break;
-+						}
-+
-+						if(mc) {
-+
-+							struct sk_buff *nskb;
-+							int need = 2+sizeof(struct iphdr)+sizeof(struct udphdr);
-+							int hneed = need + ndev->hard_header_len;
-+
-+							if((nskb = (struct sk_buff *)dev_alloc_skb(hneed)) != NULL) {
-+
-+								ushort n = sizeof(struct udphdr) + 2;
-+								struct iphdr *niph;
-+								struct udphdr *nup;
-+								skb_reserve(nskb,ndev->hard_header_len);
-+
-+								if((niph = (struct iphdr *)skb_put(nskb,need))==NULL){
-+
-+									printk(KERN_DEBUG "%s: skb_put failt (%d bytes)\n", lp->name,hneed);
-+									dev_kfree_skb(nskb);
-+									return(0);
-+								}
-+
-+								nup = (struct udphdr *)(niph + 1);
-+								((char *)(nup + 1))[0] = mc;
-+								((char *)(nup + 1))[1] = mc;
-+								nup->source=udp->dest;
-+								nup->dest=udp->source;
-+								nup->len=htons(n);
-+								nup->check=0; /* dont need checksum */
-+								memset((void *)niph,0,sizeof(*niph));
-+								niph->version=4;
-+								niph->ihl=5;
-+								niph->tot_len=NBYTEORDER_30BYTES;
-+								niph->ttl = 32;
-+								niph->protocol = IPPROTO_UDP;
-+								niph->saddr=iph->daddr;
-+								niph->daddr=iph->saddr;
-+								niph->id=iph->id;
-+								niph->check=ip_fast_csum((unsigned char *)niph,niph->ihl);
-+								nskb->dev = ndev;
-+								nskb->pkt_type = PACKET_HOST;
-+								nskb->protocol = htons(ETH_P_IP);
-+								nskb->mac.raw = nskb->data;
-+								netif_rx(nskb);
-+							}
-+
-+							return(1);
-+						}
-+					}
-+				}
-+			}
-+		}
-+	}
-+
-+	return(0);
-+}
-+#endif
-+
-+
-+void isdn_dw_clear_if(ulong pm,isdn_net_local *lp)
-+{
-+	if(lp != NULL) {
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+		isdn_dw_abc_lcr_clear(lp);
-+#endif
-+	}
-+}
-+
-+
-+
-+static void dw_abc_timer_func(u_long dont_need_yet)
-+{
-+	register u_long t;
-+
-+	if(!((t = ++isdn_dwabc_jiffies.msec_100) & 1))
-+		if(isdn_dwabc_jiffies.msec_200++ & 1)
-+			isdn_dwabc_jiffies.msec_400++;
-+	
-+	if(!(t % 5)) 
-+		if(isdn_dwabc_jiffies.msec_500++ & 1)
-+			isdn_dwabc_jiffies.msec_1000++;
-+
-+	dw_abc_timer.expires = jiffies + DWABC_TMRES;
-+	add_timer(&dw_abc_timer);
-+}
-+
-+
-+void isdn_dw_abc_init_func(void)
-+{
-+
-+	init_timer(&dw_abc_timer);
-+	dw_abc_timer.function = dw_abc_timer_func;
-+
-+
-+	printk( KERN_INFO
-+		"abc-extension %s Kernel 0x%06X\n"
-+		"written by\nDetlef Wengorz <detlefw@isdn4linux.de>\n"
-+		"Installed options:\n"
-+#ifdef CONFIG_ISDN_WITH_ABC_CALLB
-+		"CONFIG_ISDN_WITH_ABC_CALLB\n"
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_UDP_CHECK
-+		"CONFIG_ISDN_WITH_ABC_UDP_CHECK\n"
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_UDP_CHECK_HANGUP
-+		"CONFIG_ISDN_WITH_ABC_UDP_CHECK_HANGUP\n"
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_UDP_CHECK_DIAL
-+		"CONFIG_ISDN_WITH_ABC_UDP_CHECK_DIAL\n"
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+		"CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ\n"
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+		"CONFIG_ISDN_WITH_ABC_LCR_SUPPORT\n"
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_RCV_NO_HUPTIMER
-+		"CONFIG_ISDN_WITH_ABC_RCV_NO_HUPTIMER\n"
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_CH_EXTINUSE
-+		"CONFIG_ISDN_WITH_ABC_CH_EXTINUSE\n"
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+		"CONFIG_ISDN_WITH_ABC_CONN_ERROR\n"
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_RAWIPCOMPRESS
-+		"CONFIG_ISDN_WITH_ABC_RAWIPCOMPRESS\n"
-+#endif
-+		"loaded\n",
-+		dwabcrevison,LINUX_VERSION_CODE);
-+		dwsjiffies = 0;
-+		dw_abc_timer.expires = jiffies + DWABC_TMRES;
-+		add_timer(&dw_abc_timer);
-+}
-+
-+void isdn_dw_abc_release_func(void)
-+{
-+	del_timer(&dw_abc_timer);
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+	dw_lcr_clear_all();
-+#endif
-+	printk( KERN_INFO
-+		"abc-extension %s  Kernel 0x%06X\n"
-+		"written by\n"
-+		"Detlef Wengorz <detlefw@isdn4linux.de>\n"
-+		"unloaded\n",
-+		dwabcrevison,LINUX_VERSION_CODE);
-+}
-+
-+
-+void isdn_dwabc_test_phone(isdn_net_local *lp) 
-+{
-+	if(lp != NULL) {
-+
-+		isdn_net_phone *h = lp->phone[0];
-+		ulong oflags = lp->dw_abc_flags;
-+		int secure = 0;
-+
-+		lp->dw_abc_flags = 0;
-+#ifdef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+		*lp->dw_out_msn = 0;
-+#endif
-+
-+		for(;h != NULL && secure < 1000;secure++,h = h->next) {
-+
-+			char *p 	= 	h->num;
-+			char *ep 	= 	p + ISDN_MSNLEN;
-+
-+			for(;p < ep && *p && (*p <= ' ' || *p == '"' || *p == '\'');p++);
-+
-+			if(p >= ep)
-+				continue;
-+
-+#ifdef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+			if(*p == '>') {
-+
-+				if(++p < ep && *p != '<' && *p != '>') {
-+
-+					char *d = lp->dw_out_msn;
-+
-+					for(;*p && (p < ep) && (*p == ' ' || *p == '\t');p++);
-+					for(ep--;*p && (p < ep);) *(d++) = *(p++);
-+					*d = 0;
-+					continue;
-+				}
-+			}
-+#endif
-+
-+			if(*p == '~') {
-+
-+				/* abc switch's */
-+
-+				for(p++;p < ep && *p;p++) switch(*p) {
-+				case 'u':	lp->dw_abc_flags |= ISDN_DW_ABC_FLAG_NO_UDP_CHECK;			break;
-+				case 'h':	lp->dw_abc_flags |= ISDN_DW_ABC_FLAG_NO_UDP_HANGUP;			break;
-+				case 'd':	lp->dw_abc_flags |= ISDN_DW_ABC_FLAG_NO_UDP_DIAL;			break;
-+				case 'c':	lp->dw_abc_flags |= ISDN_DW_ABC_FLAG_NO_CH_EXTINUSE;		break;
-+				case 'e':   lp->dw_abc_flags |= ISDN_DW_ABC_FLAG_NO_CONN_ERROR;			break;
-+				case 'l':   lp->dw_abc_flags |= ISDN_DW_ABC_FLAG_NO_LCR;				break;
-+
-+				case 'x':
-+				case 'X':	lp->dw_abc_flags |= ISDN_DW_ABC_FLAG_RCV_NO_HUPTIMER;		break;
-+
-+				case 'B':	lp->dw_abc_flags |= ISDN_DW_ABC_FLAG_BSD_COMPRESS;			break;
-+				case 'L': 	lp->dw_abc_flags |= ISDN_DW_ABC_FLAG_LEASED_LINE;			break;
-+
-+				case '"':
-+				case ' ':
-+				case '\t':
-+				case '\'':	break;
-+
-+				default:	
-+					printk(KERN_DEBUG"isdn_net: %s abc-switch <~%c> unknown\n",lp->name,*p);
-+					break;
-+				}
-+			}
-+		}
-+
-+		if(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_LEASED_LINE) {
-+
-+			lp->dw_abc_flags |= 
-+					ISDN_DW_ABC_FLAG_NO_UDP_CHECK		|
-+					ISDN_DW_ABC_FLAG_NO_UDP_HANGUP		|
-+					ISDN_DW_ABC_FLAG_NO_UDP_DIAL		|
-+					ISDN_DW_ABC_FLAG_NO_CH_EXTINUSE		|
-+					ISDN_DW_ABC_FLAG_NO_CONN_ERROR		|
-+					ISDN_DW_ABC_FLAG_NO_LCR;
-+		}
-+
-+		if(dev->net_verbose  && (lp->dw_abc_flags != oflags || dev->net_verbose > 4))
-+			printk(KERN_DEBUG "isdn_net %s abc-flags 0x%lx\n",lp->name,lp->dw_abc_flags);
-+
-+	}
-+}
-+
-+
-+int isdn_dw_abc_reset_interface(isdn_net_local *lp,int with_message)
-+{
-+	int r = -EINVAL;
-+
-+	if(lp != NULL) {
-+
-+		r = 0;
-+
-+		lp->dw_abc_bchan_last_connect = 0;
-+		lp->dw_abc_dialstart = 0;
-+		lp->dw_abc_inuse_secure = 0;
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+		lp->dw_abc_bchan_errcnt = 0;
-+#endif
-+
-+		if(with_message && dev->net_verbose > 0)
-+			printk(KERN_INFO
-+				"%s: NOTE: reset (clear) abc-interface-secure-counter\n",
-+				lp->name);
-+	}
-+
-+	return(r);
-+}
-+
-+	
-+#if CONFIG_ISDN_WITH_ABC_RAWIPCOMPRESS && CONFIG_ISDN_PPP
-+
-+#define DWBSD_PKT_FIRST_LEN 16
-+#define DWBSD_PKT_SWITCH	165
-+#define DWBSD_PKT_BSD		189
-+
-+#define DWBSD_VERSION 		0x2
-+
-+void dwabc_bsd_first_gen(isdn_net_local *lp)
-+{
-+	if(lp != NULL && lp->p_encap == ISDN_NET_ENCAP_RAWIP && 
-+		(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_BSD_COMPRESS)) { 
-+		
-+		struct sk_buff *skb = NULL;
-+		char *p = NULL;
-+		char *ep = NULL;
-+
-+		if((skb =(struct sk_buff *)dev_alloc_skb(128)) == NULL) {
-+
-+			printk(KERN_INFO "%s: dwabc: alloc-skb failed for 128 bytes\n",lp->name);
-+			return;
-+		}
-+
-+		skb_reserve(skb,64);
-+		p = skb_put(skb,DWBSD_PKT_FIRST_LEN);
-+		ep = p + DWBSD_PKT_FIRST_LEN;
-+
-+		*(p++) = DWBSD_PKT_SWITCH;
-+		*(p++) = DWBSD_VERSION;
-+		for(;p < ep;p++)	*(p++) = 0;
-+
-+		isdn_net_write_super(lp, skb);
-+
-+		if(dev->net_verbose > 2)
-+			printk(KERN_INFO "%s: dwabc: sending comm-header version 0x%x\n",lp->name,DWBSD_VERSION);
-+	}
-+}
-+
-+
-+void dwabc_bsd_free(isdn_net_local *lp)
-+{
-+	if(lp != NULL) {
-+
-+		if(lp->dw_abc_bsd_stat_rx || lp->dw_abc_bsd_stat_tx) {
-+
-+			struct isdn_ppp_compressor *c = NULL;
-+
-+			if(!(c = (struct isdn_ppp_compressor *)lp->dw_abc_bsd_compressor)) {
-+
-+				printk(KERN_WARNING
-+				"%s: PANIC: freeing bsd compressmemory without compressor\n",
-+					lp->name);
-+
-+			} else {
-+
-+				if(lp->dw_abc_bsd_stat_rx) (*c->free)(lp->dw_abc_bsd_stat_rx);
-+				if(lp->dw_abc_bsd_stat_tx) (*c->free)(lp->dw_abc_bsd_stat_tx);
-+
-+				if(dev->net_verbose > 2)
-+					printk(KERN_INFO
-+						"%s: free bsd compress-memory\n",
-+						lp->name);
-+			}
-+		}
-+
-+		lp->dw_abc_bsd_compressor = NULL;
-+		lp->dw_abc_bsd_stat_rx = NULL;
-+		lp->dw_abc_bsd_stat_tx = NULL;
-+		lp->dw_abc_if_flags &= ~ISDN_DW_ABC_IFFLAG_BSDAKTIV;
-+
-+		if(dev->net_verbose > 0) {
-+
-+			if(lp->dw_abc_bsd_rcv != lp->dw_abc_bsd_bsd_rcv) {
-+
-+				printk(KERN_INFO "%s: Receive %lu<-%lu kb\n",lp->name,
-+					lp->dw_abc_bsd_rcv >> 10 , lp->dw_abc_bsd_bsd_rcv >> 10);
-+			}
-+
-+
-+			if(lp->dw_abc_bsd_snd != lp->dw_abc_bsd_bsd_snd) {
-+
-+				printk(KERN_INFO "%s: Send  %lu->%lu kb\n",lp->name,
-+					lp->dw_abc_bsd_snd >> 10 , lp->dw_abc_bsd_bsd_snd >> 10);
-+			}
-+		}
-+
-+		lp->dw_abc_bsd_rcv 		=
-+		lp->dw_abc_bsd_bsd_rcv	=
-+		lp->dw_abc_bsd_snd 		=
-+		lp->dw_abc_bsd_bsd_snd 	= 0;
-+	}
-+}
-+
-+
-+int dwabc_bsd_init(isdn_net_local *lp)
-+{
-+	int r = 1;
-+
-+	if(lp != NULL) {
-+
-+		dwabc_bsd_free(lp);
-+
-+		if(lp->p_encap == ISDN_NET_ENCAP_RAWIP) {
-+
-+			void *rx = NULL;
-+			void *tx = NULL;
-+			struct isdn_ppp_comp_data *cp = NULL;
-+			struct isdn_ppp_compressor *c = NULL;
-+
-+			if(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_BSD_COMPRESS) do {
-+
-+				for(c = ipc_head ;
-+					c != NULL && c->num != CI_BSD_COMPRESS; c = c->next);
-+
-+				if(c == NULL) {
-+
-+					printk(KERN_INFO
-+						"%s: Module isdn_bsdcompress not loaded\n",
-+						lp->name);
-+
-+					break;
-+				}
-+
-+				cp = (struct isdn_ppp_comp_data *)
-+					kmalloc(sizeof(struct isdn_ppp_comp_data),GFP_ATOMIC);
-+
-+				if(cp == NULL) {
-+
-+					printk(KERN_INFO
-+						"%s: allocation of isdn_ppp_comp_data failed\n",
-+						lp->name);
-+
-+					break;
-+				}
-+
-+				memset(cp,0,sizeof(*cp));
-+				cp->num = CI_BSD_COMPRESS;
-+				cp->optlen = 1;
-+					
-+				/*
-+				** set BSD_VERSION 1 and 12 bits compressmode
-+				*/
-+				*cp->options = (1 << 5) | 12;
-+
-+				if((rx = (*c->alloc)(cp)) == NULL) {
-+
-+					printk(KERN_INFO
-+						"%s: allocation of bsd rx-memory failed\n",
-+						lp->name);
-+
-+					break;
-+				}
-+					
-+				if(!(*c->init)(rx,cp,0,1)) {
-+
-+					printk(KERN_INFO 
-+						"%s: init of bsd rx-stream  failed\n",lp->name);
-+
-+					break;
-+				}
-+
-+				cp->flags = IPPP_COMP_FLAG_XMIT;
-+						
-+				if((tx = (*c->alloc)(cp)) == NULL) {
-+
-+					printk(KERN_INFO
-+						"%s: allocation of bsd tx-memory failed\n",
-+						lp->name);
-+
-+					break;
-+				}
-+
-+				if(!(*c->init)(tx,cp,0,1)) {
-+
-+					printk(KERN_INFO
-+						"%s: init of bsd tx-stream  failed\n",
-+						lp->name);
-+
-+					break;
-+				}
-+
-+				lp->dw_abc_bsd_compressor = (void *)c;
-+				lp->dw_abc_bsd_stat_rx = rx;
-+				lp->dw_abc_bsd_stat_tx = tx;
-+				rx = tx = NULL;
-+				r = 0;
-+
-+				if(dev->net_verbose > 2)
-+					printk(KERN_INFO
-+						"%s: bsd compress-memory and init ok\n",
-+						lp->name);
-+
-+			} while(0);
-+
-+			if(cp != NULL)
-+				kfree(cp);
-+
-+			if(c != NULL) {
-+
-+				if(tx != NULL) (*c->free)(tx);
-+				if(rx != NULL) (*c->free)(rx);
-+			}
-+
-+		} else if(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_BSD_COMPRESS) {
-+		
-+			printk(KERN_INFO
-+				"%s: bsd-compress only with encapsulation rawip allowed\n",
-+				lp->name);
-+		}
-+	}
-+
-+	return(r);
-+}
-+
-+struct sk_buff *dwabc_bsd_compress(	isdn_net_local *lp,
-+									struct sk_buff *skb,
-+									struct net_device *ndev)
-+{
-+	if(lp != NULL && lp->p_encap == ISDN_NET_ENCAP_RAWIP 	&& 
-+		(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_BSD_COMPRESS)	&&
-+		(lp->dw_abc_if_flags & ISDN_DW_ABC_IFFLAG_BSDAKTIV)) {
-+
-+		if(lp->dw_abc_bsd_stat_tx != NULL && lp->dw_abc_bsd_compressor) {
-+
-+			struct isdn_ppp_compressor *cp = 
-+				(struct isdn_ppp_compressor *)lp->dw_abc_bsd_compressor;
-+
-+			struct sk_buff *nskb = (struct sk_buff *)
-+				dev_alloc_skb(skb->len * 2 + ndev->hard_header_len);
-+
-+			int l = 0;
-+
-+			if(nskb == NULL) {
-+
-+				(void)(*cp->reset)(lp->dw_abc_bsd_stat_tx,0,0,NULL,0,NULL);
-+				printk(KERN_INFO "%s: dwabc-compress no memory\n",lp->name);
-+
-+			} else {
-+
-+				skb_reserve(nskb,ndev->hard_header_len);
-+				*(unsigned char *)skb_put(nskb,1) = DWBSD_PKT_BSD;
-+				l = (*cp->compress)(lp->dw_abc_bsd_stat_tx,skb,nskb,0x21);
-+
-+				if(l < 1 || l > skb->len) {
-+
-+					(void)(*cp->reset)(lp->dw_abc_bsd_stat_tx,0,0,NULL,0,NULL);
-+					dev_kfree_skb(nskb);
-+
-+				} else {
-+
-+					u_short sqnr;
-+
-+					dev_kfree_skb(skb);
-+					skb = nskb;
-+					sqnr = ((*(u_char *)skb->data) << 8) + 
-+							((u_char)skb->data[1]);
-+
-+					if(sqnr > 65500)
-+						(void)(*cp->reset)
-+							(lp->dw_abc_bsd_stat_tx,0,0,NULL,0,NULL);
-+				}
-+			}
-+		}
-+	}
-+
-+	return(skb);
-+}
-+
-+struct sk_buff *dwabc_bsd_rx_pkt(	isdn_net_local *lp,
-+									struct sk_buff *skb,
-+									struct net_device *ndev)
-+{
-+	struct sk_buff *r = skb;
-+
-+	if(lp != NULL && lp->p_encap == ISDN_NET_ENCAP_RAWIP && 
-+		(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_BSD_COMPRESS)) { 
-+
-+		unsigned char *p = (unsigned char *)skb->data;
-+		struct isdn_ppp_compressor *cp = 
-+			(struct isdn_ppp_compressor *)lp->dw_abc_bsd_compressor;
-+
-+		if(*p == DWBSD_PKT_SWITCH) {
-+
-+			if(skb->len == DWBSD_PKT_FIRST_LEN) {
-+
-+				if((lp->dw_abc_remote_version = p[1]) < 0x2) {
-+
-+					printk(KERN_INFO 
-+						"%s: I can't really talk with remote version 0x%x\n"
-+						"Please upgrade remote or disable rawip-compression\n",
-+						lp->name,
-+						p[1]);
-+				}
-+
-+				lp->dw_abc_if_flags |= ISDN_DW_ABC_IFFLAG_BSDAKTIV;
-+				dev_kfree_skb(skb);
-+
-+				if(cp && lp->dw_abc_bsd_stat_tx) 
-+					(void)(*cp->reset)(lp->dw_abc_bsd_stat_tx,0,0,NULL,0,NULL);
-+
-+				if(dev->net_verbose > 2)
-+					printk(KERN_INFO 
-+						"%s: receive comm-header rem-version 0x%02x\n",
-+						lp->name,
-+						lp->dw_abc_remote_version);
-+
-+				return(NULL);
-+			}
-+
-+		} else if(*p == DWBSD_PKT_BSD && lp->dw_abc_bsd_stat_rx != NULL && cp) {
-+
-+			struct sk_buff *nskb = NULL;
-+
-+			if(test_and_set_bit(ISDN_DW_ABC_BITLOCK_RECEIVE,
-+				&lp->dw_abc_bitlocks)) {
-+
-+				printk(KERN_INFO "%s: bsd-decomp called recursivly\n",lp->name);
-+				dev_kfree_skb(skb);
-+				dwabc_bsd_first_gen(lp);
-+				return(NULL);
-+			} 
-+			
-+			nskb = (struct sk_buff *)
-+				dev_alloc_skb(2048 + ndev->hard_header_len);
-+
-+			if(nskb != NULL) {
-+
-+				int l = 0;
-+				u_short sqnr;
-+
-+				skb_reserve(nskb,ndev->hard_header_len);
-+				skb_pull(skb, 1);
-+				sqnr = ((*(u_char *)skb->data) << 8) | ((u_char)skb->data[1]);
-+
-+				if(!sqnr && cp && lp->dw_abc_bsd_stat_rx)
-+					(void)(*cp->reset)(lp->dw_abc_bsd_stat_rx,0,0,NULL,0,NULL);
-+
-+				if((l = (*cp->decompress)
-+					(lp->dw_abc_bsd_stat_rx,skb,nskb,NULL)) < 1 || l>8000) {
-+
-+					printk(KERN_INFO "%s: abc-decomp failed\n",lp->name);
-+					dev_kfree_skb(nskb);
-+					dev_kfree_skb(skb);
-+					nskb = NULL;
-+					dwabc_bsd_first_gen(lp);
-+
-+				} else {
-+
-+					if (nskb->data[0] & 0x1)
-+						skb_pull(nskb, 1);   /* protocol ID is only 8 bit */
-+					else
-+						skb_pull(nskb, 2);
-+
-+					nskb->dev = skb->dev;
-+					nskb->pkt_type = skb->pkt_type;
-+					nskb->mac.raw = nskb->data;
-+					dev_kfree_skb(skb);
-+				}
-+
-+			} else {
-+
-+				printk(KERN_INFO "%s: PANIC abc-decomp no memory\n",lp->name);
-+				dev_kfree_skb(skb);
-+				dwabc_bsd_first_gen(lp);
-+			}
-+
-+			clear_bit(ISDN_DW_ABC_BITLOCK_RECEIVE,&lp->dw_abc_bitlocks);
-+			r = nskb;
-+		}
-+	}
-+
-+	return(r);
-+}
-+
-+#else
-+int dwabc_bsd_init(isdn_net_local *lp) { return(1); }
-+void dwabc_bsd_free(isdn_net_local *lp) { return; }
-+void dwabc_bsd_first_gen(isdn_net_local *lp) { return ; }
-+
-+struct sk_buff *dwabc_bsd_compress(isdn_net_local *lp,struct sk_buff *skb,struct net_device *ndev)
-+{ return(skb); }
-+
-+struct sk_buff *dwabc_bsd_rx_pkt(isdn_net_local *lp,struct sk_buff *skb,struct net_device *ndev)
-+{ return(skb); }
-+#endif
-+#endif
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_net.c linux-2.4.29/drivers/isdn/isdn_net.c
---- linux-2.4.29.old/drivers/isdn/isdn_net.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_net.c	2005-03-22 15:06:44.447335760 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_net.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_net.c,v 1.153 2002/08/17 18:35:23 detabc Exp $
-  *
-  * Linux ISDN subsystem, network interfaces and related functions (linklevel).
-  *
-@@ -9,14 +9,6 @@
-  * This software may be used and distributed according to the terms
-  * of the GNU General Public License, incorporated herein by reference.
-  *
-- * Data Over Voice (DOV) support added - Guy Ellis 23-Mar-02 
-- *                                       guy@traverse.com.au
-- * Outgoing calls - looks for a 'V' in first char of dialed number
-- * Incoming calls - checks first character of eaz as follows:
-- *   Numeric - accept DATA only - original functionality
-- *   'V'     - accept VOICE (DOV) only
-- *   'B'     - accept BOTH DATA and DOV types
-- *
-  * Jan 2001: fix CISCO HDLC      Bjoern A. Zeeb <i4l@zabbadoz.net>
-  *           for info on the protocol, see 
-  *           http://i4l.zabbadoz.net/i4l/cisco-hdlc.txt
-@@ -38,6 +30,10 @@
- #include "isdn_concap.h"
- #endif
- 
-+#ifdef CONFIG_ISDN_WITH_ABC
-+#include <linux/isdn_dwabc.h>
-+#define isdn_net_log_skb(skb,lp) isdn_net_log_skb_dwabc(skb,lp,NULL)
-+#endif
- 
- /*
-  * Outline of new tbusy handling: 
-@@ -79,7 +75,11 @@
- 		dev = lp->master;
- 	else
- 		dev = &n->dev;
-+#ifdef COMPAT_NO_SOFTNET
-+	return dev->start;
-+#else
- 	return netif_running(dev);
-+#endif
- }
- 
- /*
-@@ -143,6 +143,10 @@
- 	atomic_inc(&lp->frame_cnt);
- 	if (isdn_net_device_busy(lp))
- 		isdn_net_device_stop_queue(lp);
-+#if 0
-+	printk(KERN_DEBUG "%s: inc_frame_cnt now %d\n", lp->name, 
-+	      atomic_read(&lp->frame_cnt));
-+#endif
- }
- 
- static __inline__ void isdn_net_dec_frame_cnt(isdn_net_local *lp)
-@@ -157,11 +161,19 @@
- 			isdn_net_device_wake_queue(lp);
- 		}
-        }                                                                      
-+#if 0
-+	printk(KERN_DEBUG "%s: dec_frame_cnt now %d\n", lp->name, 
-+	       atomic_read(&lp->frame_cnt));
-+#endif
- }
- 
- static __inline__ void isdn_net_zero_frame_cnt(isdn_net_local *lp)
- {
- 	atomic_set(&lp->frame_cnt, 0);
-+#if 0
-+	printk(KERN_DEBUG "%s: zero_frame_cnt now %d\n", lp->name,
-+	       atomic_read(&lp->frame_cnt));
-+#endif
- }
- 
- /* For 2.2.x we leave the transmitter busy timeout at 2 secs, just 
-@@ -173,23 +185,101 @@
-  * which might rely on the tx timeout. If so, we'll find out this way...
-  */
- 
-+#ifdef COMPAT_NO_SOFTNET
-+#define ISDN_NET_TX_TIMEOUT (2*HZ)
-+#else
- #define ISDN_NET_TX_TIMEOUT (20*HZ) 
-+#endif
- 
- /* Prototypes */
- 
-+#ifndef CONFIG_ISDN_WITH_ABC
- int isdn_net_force_dial_lp(isdn_net_local *);
-+#endif
- static int isdn_net_start_xmit(struct sk_buff *, struct net_device *);
- 
- static void isdn_net_ciscohdlck_connected(isdn_net_local *lp);
- static void isdn_net_ciscohdlck_disconnected(isdn_net_local *lp);
- 
--char *isdn_net_revision = "$Revision: 1.1.4.1 $";
-+char *isdn_net_revision = "$Revision: 1.153 $";
- 
-  /*
-   * Code for raw-networking over ISDN
-   */
-+#ifdef CONFIG_ISDN_WITH_ABC
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+static int isdn_dwabc_encap_with_conerr(isdn_net_local *lp)
-+{
-+	if(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_NO_CONN_ERROR)
-+		return(0);
-+
-+	return( 
-+		lp->p_encap == ISDN_NET_ENCAP_SYNCPPP			||
-+		lp->p_encap == ISDN_NET_ENCAP_RAWIP 			||
-+		lp->p_encap == ISDN_NET_ENCAP_CISCOHDLCK		||
-+		lp->p_encap == ISDN_NET_ENCAP_UIHDLC			);
-+}
-+
-+static int isdn_dwabc_conerr_ippktok(struct sk_buff *skb)
-+{
-+		struct iphdr *iph = (struct iphdr *)skb->data;
-+		return(iph->version == 6 || (skb->len >= 20 && iph->version == 4));
-+}
-+
-+#endif
-+
-+static int isdn_dwabc_is_interface_disabled(isdn_net_local *lp)
-+{
-+	if(lp == NULL)
-+		return(0);
-+
-+	lp->dw_abc_inuse_secure = 0;
-+	lp->dw_abc_dialstart = 0;
-+
-+	/*
-+	** check for jiffies overflow
-+	*/
-+	if(lp->dw_abc_bchan_last_connect > jiffies) {
-+
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+		lp->dw_abc_bchan_errcnt = 0;
-+#endif
-+		lp->dw_abc_bchan_last_connect = 0;
-+	}
-+
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+	if(!(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_NO_CONN_ERROR) && isdn_dwabc_encap_with_conerr(lp)) {
-+
-+		if(lp->dw_abc_bchan_errcnt > 3 && !(lp->dw_abc_bchan_errcnt & 3)) {
- 
-+			ulong nj = jiffies;
-+			ulong delay = 	lp->dw_abc_bchan_errcnt * 
-+							lp->dw_abc_bchan_errcnt * 
-+							lp->dw_abc_bchan_errcnt;
-+
-+			if(delay > 86400) delay = 86400;
-+			delay = (lp->dw_abc_bchan_last_connect + delay * HZ);
-+
-+			if(delay > nj) {
-+
-+				printk(KERN_INFO 
-+					"%s: interface auto-disabled (bchannel connect-error %lu seconds left)\n",
-+					lp->name,(delay - nj) / HZ);
-+
-+				return(1);
-+			}
-+		}
-+	}
-+#endif
-+	return(0);
-+}
-+#endif
-+
-+#ifdef CONFIG_ISDN_WITH_ABC
-+void
-+#else
- static void
-+#endif
- isdn_net_unreachable(struct net_device *dev, struct sk_buff *skb, char *reason)
- {
- 	if(skb) {
-@@ -297,6 +387,12 @@
- 
- 	save_flags(flags);
- 	cli();
-+#ifdef CONFIG_ISDN_WITH_ABC
-+	isdn_dw_clear_if(0l,lp);
-+	lp->dw_abc_if_flags &= ~ISDN_DW_ABC_IFFLAG_NODCHAN;
-+	lp->dw_abc_inuse_secure = 0;
-+	dwabc_bsd_free(lp);
-+#endif
- 	skb_queue_purge(&lp->super_tx_queue);
- 
- 	if (!lp->master) {	/* reset only master device */
-@@ -351,6 +447,26 @@
- 		if ((l->flags & ISDN_NET_CONNECTED) && (!l->dialstate)) {
- 			anymore = 1;
- 			l->huptimer++;
-+#ifdef CONFIG_ISDN_WITH_ABC
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+			if(	isdn_dwabc_encap_with_conerr(l)	&& l->dw_abc_bchan_errcnt > 0) {
-+
-+				int n = 180;
-+
-+				if(l->dw_abc_bchan_errcnt > 3) n = 120;
-+				if(l->dw_abc_bchan_errcnt > 6) n = 90;
-+				if(l->dw_abc_bchan_errcnt > 9) n = 60;
-+
-+				if(l->huptimer > n) {
-+
-+					printk(KERN_INFO "%s: bchan conf-error auto-secure-hangup\n",l->name);
-+					isdn_net_hangup(&p->dev);
-+					p = (isdn_net_dev *) p->next;
-+					continue;
-+				}
-+			}
-+#endif
-+#endif
- 			/*
- 			 * if there is some dialmode where timeout-hangup
- 			 * should _not_ be done, check for that here
-@@ -465,8 +581,32 @@
- 					printk(KERN_INFO "%s: Chargesum is %d\n", lp->name,
- 					       lp->charge);
- 					isdn_net_unbind_channel(lp);
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+					if(lp->dw_abc_bchan_errcnt) {
-+
-+						printk(KERN_INFO
-+							"%s: Note: bchannel-error-counter is %hd\n",
-+							lp->name,
-+							lp->dw_abc_bchan_errcnt);
-+					}
-+#endif
- 					return 1;
- 				}
-+#ifdef CONFIG_ISDN_WITH_ABC_CH_EXTINUSE
-+				if(!(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_NO_CH_EXTINUSE)) {
-+					if((lp->dialstate == 4 || lp->dialstate == 12) && 
-+						lp->dw_abc_dialstart && (idx < ISDN_MAX_CHANNELS)) {
-+					
-+						if((jiffies - lp->dw_abc_dialstart) < (HZ >>2)) {
-+
-+							lp->dw_abc_if_flags |= ISDN_DW_ABC_IFFLAG_NODCHAN;
-+							lp->dialstate = 1;
-+							dev->dwabc_chan_external_inuse[idx] = jiffies + HZ * 30;
-+							printk(KERN_INFO "%s: Channel %d look like external in use\n",lp->name,idx);
-+						}
-+					}
-+				}
-+#endif
- 				break;
- #ifdef CONFIG_ISDN_X25
- 			case ISDN_STAT_BHUP:
-@@ -507,6 +647,19 @@
- 							}
- 						}
- 						printk(KERN_INFO "isdn_net: %s connected\n", lp->name);
-+#ifdef CONFIG_ISDN_WITH_ABC
-+						if(!dwabc_bsd_init(lp)) dwabc_bsd_first_gen(lp);
-+						lp->dw_abc_bchan_last_connect = jiffies;
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+						if(!(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_NO_CONN_ERROR)) {
-+
-+							lp->dw_abc_bchan_errcnt += isdn_dwabc_encap_with_conerr(lp);
-+							
-+							if(lp->dw_abc_bchan_errcnt > 32000)
-+								lp->dw_abc_bchan_errcnt = 32000;
-+						}
-+#endif
-+#endif
- 						/* If first Chargeinfo comes before B-Channel connect,
- 						 * we correct the timestamp here.
- 						 */
-@@ -578,7 +731,6 @@
- 	int i;
- 	unsigned long flags;
- 	isdn_ctrl cmd;
--        u_char *phone_number;
- 
- 	while (p) {
- 		isdn_net_local *lp = p->local;
-@@ -597,6 +749,47 @@
- 				 */
- 				save_flags(flags);
- 				cli();
-+#ifdef CONFIG_ISDN_WITH_ABC_CH_EXTINUSE
-+				if(!(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_NO_CH_EXTINUSE) &&
-+					(lp->dw_abc_if_flags & ISDN_DW_ABC_IFFLAG_NODCHAN)) {
-+
-+					int chi = 0;
-+					short lsecure = 0;
-+
-+					lsecure = lp->dw_abc_inuse_secure;
-+					isdn_net_unbind_channel(lp);
-+					lp->dw_abc_inuse_secure = lsecure + 1;
-+
-+					/* Grab a free ISDN-Channel */
-+					if ((lsecure >= ISDN_MAX_CHANNELS ) || (chi = 
-+						isdn_get_free_channel(
-+							ISDN_USAGE_NET,
-+							lp->l2_proto,
-+							lp->l3_proto,
-+							lp->pre_device,
-+						 	lp->pre_channel,
-+#ifdef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+							(*lp->dw_out_msn) ? lp->dw_out_msn : lp->msn)
-+#else
-+							lp->msn)
-+#endif
-+							) < 0) {
-+
-+						restore_flags(flags);
-+						isdn_net_unreachable(&p->dev, NULL,
-+							"DWABC: redial-external-inuse NO FREE CHANNEL\n");
-+						isdn_net_hangup(&p->dev);
-+						break;
-+					}
-+
-+					isdn_net_bind_channel(lp, chi);
-+					lp->dialstate = 1;
-+					lp->dialstarted = 0;
-+					lp->dialwait_timer = 0;
-+				}
-+
-+				lp->dw_abc_if_flags &= ~ISDN_DW_ABC_IFFLAG_NODCHAN;
-+#endif
- 				lp->dial = lp->phone[1];
- 				restore_flags(flags);
- 				if (!lp->dial) {
-@@ -621,18 +814,69 @@
- 				cmd.arg = lp->isdn_channel;
- 				cmd.command = ISDN_CMD_CLREAZ;
- 				isdn_command(&cmd);
-+#ifdef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+				sprintf(cmd.parm.num, "%s",
-+					isdn_map_eaz2msn((*lp->dw_out_msn) ? lp->dw_out_msn : lp->msn, cmd.driver));
-+#else
- 				sprintf(cmd.parm.num, "%s", isdn_map_eaz2msn(lp->msn, cmd.driver));
-+#endif
- 				cmd.command = ISDN_CMD_SETEAZ;
- 				isdn_command(&cmd);
- 				lp->dialretry = 0;
- 				anymore = 1;
- 				lp->dialstate++;
-+#ifdef CONFIG_ISDN_WITH_ABC
-+				lp->onhtime = lp->dw_abc_old_onhtime;
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+				isdn_dw_abc_lcr_clear(lp);
-+#endif
-+#endif
- 				/* Fall through */
- 			case 3:
- 				/* Setup interface, dial current phone-number, switch to next number.
- 				 * If list of phone-numbers is exhausted, increment
- 				 * retry-counter.
- 				 */
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+				if(!isdn_dw_abc_lcr_lock()) {
-+
-+					if(	lp->dw_abc_lcr_cmd != NULL 		&&
-+						lp->dw_abc_lcr_start_request 	!= 
-+						lp->dw_abc_lcr_end_request) {
-+
-+						if(	lp->dw_abc_lcr_io == NULL 				&& 
-+							lp->dw_abc_lcr_start_request <= jiffies &&
-+							lp->dw_abc_lcr_end_request > jiffies) {
-+							
-+							isdn_dw_abc_lcr_ulock();
-+							anymore = 1;
-+							break;
-+						}
-+
-+						if(lp->dw_abc_lcr_io != NULL) {
-+
-+							if(lp->dw_abc_lcr_io->lcr_ioctl_flags & 
-+								DWABC_LCR_FLG_DISABLE) {
-+
-+								isdn_dw_abc_lcr_ulock();
-+								isdn_net_hangup(&p->dev);
-+								break;
-+							}
-+
-+							if(lp->dw_abc_lcr_io->lcr_ioctl_flags & 
-+								DWABC_LCR_FLG_NEWHUPTIME) {
-+								lp->onhtime = lp->dw_abc_lcr_io->lcr_ioctl_onhtime;
-+							}
-+						}
-+
-+						memcpy(&cmd,lp->dw_abc_lcr_cmd,sizeof(cmd));
-+						isdn_dw_abc_lcr_ulock();
-+						goto dw_abc_lcr_next_click;
-+					}
-+
-+					isdn_dw_abc_lcr_ulock();
-+				}
-+#endif
- 				if(dev->global_flags & ISDN_GLOBAL_STOPPED || (ISDN_NET_DIALMODE(*lp) == ISDN_NET_DM_OFF)) {
- 					char *s;
- 					if (dev->global_flags & ISDN_GLOBAL_STOPPED)
-@@ -677,20 +921,7 @@
- 							break;
- 						}
- 
--					cmd.driver = lp->isdn_device;
--					cmd.command = ISDN_CMD_DIAL;
--					cmd.parm.setup.si2 = 0;
--
--                                        /* check for DOV */
--                                        phone_number = lp->dial->num;
--                                        if ((*phone_number == 'v') ||
--					    (*phone_number == 'V')) { /* DOV call */
--                                                cmd.parm.setup.si1 = 1;
--                                        } else { /* DATA call */
--                                                cmd.parm.setup.si1 = 7;
--					}
--
--					strcpy(cmd.parm.setup.phone, phone_number);
-+					sprintf(cmd.parm.setup.phone, "%s", lp->dial->num);
- 					/*
- 					 * Switch to next number or back to start if at end of list.
- 					 */
-@@ -710,17 +941,70 @@
- 						}
- 					}
- 					restore_flags(flags);
-+					cmd.driver = lp->isdn_device;
-+					cmd.command = ISDN_CMD_DIAL;
-+					cmd.parm.setup.si1 = 7;
-+					cmd.parm.setup.si2 = 0;
-+#ifdef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ 
-+					sprintf(cmd.parm.setup.eazmsn, "%s",
-+						isdn_map_eaz2msn((*lp->dw_out_msn) ? lp->dw_out_msn : lp->msn, cmd.driver));
-+#else
- 					sprintf(cmd.parm.setup.eazmsn, "%s",
- 						isdn_map_eaz2msn(lp->msn, cmd.driver));
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+					/*
-+					** if callback-out we dont need 
-+					** low-cost-routing LCR
-+					*/
-+				    if(!(lp->flags & ISDN_NET_CBOUT) &&
-+						!(lp->dw_abc_flags & ISDN_DW_ABC_FLAG_NO_LCR)) {
-+
-+						isdn_dw_abc_lcr_call_number(lp,&cmd);
-+						
-+						if(lp->dw_abc_lcr_start_request != lp->dw_abc_lcr_end_request) {
-+
-+							if(dev->net_verbose > 2) {
-+
-+								printk(KERN_INFO 
-+					"%s: Waiting for LCR-response from isdnlog %s -> %s...\n",
-+									lp->name,
-+						   			cmd.parm.setup.eazmsn,
-+						   			cmd.parm.setup.phone);
-+							}
-+								
-+							anymore = 1;
-+							break;
-+						}
-+					} 
-+
-+dw_abc_lcr_next_click:;
-+					isdn_dw_abc_lcr_clear(lp);
-+#endif
- 					i = isdn_dc2minor(lp->isdn_device, lp->isdn_channel);
- 					if (i >= 0) {
- 						strcpy(dev->num[i], cmd.parm.setup.phone);
- 						dev->usage[i] |= ISDN_USAGE_OUTGOING;
- 						isdn_info_update();
- 					}
--					printk(KERN_INFO "%s: dialing %d %s... %s\n", lp->name,
--					       lp->dialretry, cmd.parm.setup.phone,
--					       (cmd.parm.setup.si1 == 1) ? "DOV" : "");
-+#ifdef CONFIG_ISDN_WITH_ABC
-+					printk(KERN_INFO "%s: dialing %d %s -> %s...\n", lp->name,
-+					       lp->dialretry, 
-+						   cmd.parm.setup.eazmsn,
-+						   cmd.parm.setup.phone);
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+					if(lp->dw_abc_bchan_errcnt) {
-+
-+						printk(KERN_INFO
-+							"%s: Note: bchannel-error-counter is %hd\n",
-+							lp->name,
-+							lp->dw_abc_bchan_errcnt);
-+					}
-+#endif
-+#else
-+					printk(KERN_INFO "%s: dialing %d %s...\n", lp->name,
-+					       lp->dialretry, cmd.parm.setup.phone);
-+#endif
- 					lp->dtimer = 0;
- #ifdef ISDN_DEBUG_NET_DIAL
- 					printk(KERN_DEBUG "dial: d=%d c=%d\n", lp->isdn_device,
-@@ -741,6 +1025,10 @@
- 				lp->dialstate =
- 				    (lp->cbdelay &&
- 				     (lp->flags & ISDN_NET_CBOUT)) ? 12 : 4;
-+#ifdef CONFIG_ISDN_WITH_ABC
-+				lp->dw_abc_if_flags &= ~ISDN_DW_ABC_IFFLAG_NODCHAN;
-+				lp->dw_abc_dialstart = jiffies;
-+#endif
- 				break;
- 			case 4:
- 				/* Wait for D-Channel-connect.
-@@ -890,6 +1178,15 @@
- 		isdn_command(&cmd);
- 		printk(KERN_INFO "%s: Chargesum is %d\n", lp->name, lp->charge);
- 		isdn_all_eaz(lp->isdn_device, lp->isdn_channel);
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+		if(lp->dw_abc_bchan_errcnt) {
-+
-+			printk(KERN_INFO
-+				"%s: Note: bchannel-error-counter is %hd\n",
-+				lp->name,
-+				lp->dw_abc_bchan_errcnt);
-+		}
-+#endif
- 	}
- 	isdn_net_unbind_channel(lp);
- }
-@@ -899,8 +1196,13 @@
- 	unsigned short dest;
- } ip_ports;
- 
-+#ifdef CONFIG_ISDN_WITH_ABC
-+void
-+isdn_net_log_skb_dwabc(struct sk_buff * skb, isdn_net_local * lp,char *reason)
-+#else
- static void
- isdn_net_log_skb(struct sk_buff * skb, isdn_net_local * lp)
-+#endif
- {
- 	u_char *p = skb->nh.raw; /* hopefully, this was set correctly */
- 	unsigned short proto = ntohs(skb->protocol);
-@@ -972,7 +1274,13 @@
- 					break;
- 			}
- 			printk(KERN_INFO
-+#ifdef CONFIG_ISDN_WITH_ABC
-+				"%s %s: %d.%d.%d.%d -> %d.%d.%d.%d%s\n",
-+				(reason == NULL) ? "OPEN" : reason,
-+				(lp != NULL) ? lp->name : "",
-+#else
- 				"OPEN: %d.%d.%d.%d -> %d.%d.%d.%d%s\n",
-+#endif
- 
- 			       p[12], p[13], p[14], p[15],
- 			       p[16], p[17], p[18], p[19],
-@@ -980,7 +1288,13 @@
- 			break;
- 		case ETH_P_ARP:
- 			printk(KERN_INFO
-+#ifdef CONFIG_ISDN_WITH_ABC
-+				"%s %s: ARP %d.%d.%d.%d -> *.*.*.* ?%d.%d.%d.%d\n",
-+				(reason == NULL) ? "OPEN" : reason,
-+				(lp != NULL) ? lp->name : "",
-+#else
- 				"OPEN: ARP %d.%d.%d.%d -> *.*.*.* ?%d.%d.%d.%d\n",
-+#endif
- 			       p[14], p[15], p[16], p[17],
- 			       p[24], p[25], p[26], p[27]);
- 			break;
-@@ -1004,11 +1318,22 @@
- 	}
- 
- 	spin_lock_bh(&lp->xmit_lock);
-+
- 	if (!isdn_net_lp_busy(lp)) {
-+#ifdef CONFIG_ISDN_WITH_ABC
-+		if(!skb_queue_empty(&lp->super_tx_queue)) {
-+			/*
-+			** don't reverse the frame flow
-+			** compression need frames in order and maybe other's too
-+			*/
-+			skb_queue_tail(&lp->super_tx_queue, skb); 
-+			skb = skb_dequeue(&lp->super_tx_queue);
-+		}
-+#endif
- 		isdn_net_writebuf_skb(lp, skb);
--	} else {
--		skb_queue_tail(&lp->super_tx_queue, skb);
--	}
-+
-+	} else skb_queue_tail(&lp->super_tx_queue, skb);
-+
- 	spin_unlock_bh(&lp->xmit_lock);
- }
- 
-@@ -1056,7 +1381,6 @@
- 		printk(KERN_WARNING "%s: HL driver queue full\n", lp->name);
- 		goto error;
- 	}
--	
- 	lp->transcount += len;
- 	isdn_net_inc_frame_cnt(lp);
- 	return;
-@@ -1064,9 +1388,19 @@
-  error:
- 	dev_kfree_skb(skb);
- 	lp->stats.tx_errors++;
--
- }
- 
-+#if 0
-+int isdn_net_send_skb(struct net_device *ndev, isdn_net_local * lp,struct sk_buff *skb)
-+{
-+	if (isdn_net_lp_busy(lp)) {
-+		printk(KERN_WARNING "isdn_net_send_skb: HL channel busy\n");
-+		return 1;
-+	}
-+	isdn_net_writebuf_skb(lp, skb);
-+	return 0;
-+}
-+#endif
- 
- /*
-  *  Helper function for isdn_net_start_xmit.
-@@ -1109,7 +1443,54 @@
- 
- 	/* Reset hangup-timeout */
- 	lp->huptimer = 0; // FIXME?
-+#ifdef CONFIG_ISDN_WITH_ABC
-+
-+	if(test_and_set_bit(ISDN_DW_ABC_BITLOCK_SEND,&lp->dw_abc_bitlocks)) {
-+
-+		if(dev->net_verbose > 2)
-+			printk(KERN_INFO "%s: isdn_net_xmit  called recursivly\n",lp->name);
-+
-+		spin_unlock_bh(&lp->xmit_lock);
-+		return(1);
-+	}
-+
-+	if(skb != NULL) {
-+
-+		int l = skb->len;
-+		int nl = l;
-+
-+		if(	lp->p_encap == ISDN_NET_ENCAP_RAWIP &&
-+				(lp->dw_abc_if_flags & ISDN_DW_ABC_IFFLAG_BSDAKTIV)) {
-+
-+			if((skb = dwabc_bsd_compress(lp,skb,ndev)) != NULL) {
-+
-+				int r = 0;
-+				nl = skb->len;
-+				skb_queue_tail(&lp->super_tx_queue,skb);
-+
-+				if(l != nl && (r = isdn_dc2minor(lp->isdn_device,lp->isdn_channel)) >= 0) {
-+
-+					dev->obytes[r] += l - nl;
-+					lp->stats.tx_bytes += l - nl;
-+				}
-+			}
-+
-+		} else skb_queue_tail(&lp->super_tx_queue,skb);
-+
-+		if(lp->p_encap == ISDN_NET_ENCAP_RAWIP) {
-+
-+			lp->dw_abc_bsd_snd += l;
-+			lp->dw_abc_bsd_bsd_snd += nl;
-+		}
-+	}
-+	clear_bit(ISDN_DW_ABC_BITLOCK_SEND,&lp->dw_abc_bitlocks);
-+
-+	while(!isdn_net_lp_busy(lp) && (skb = skb_dequeue(&lp->super_tx_queue)))
-+		isdn_net_writebuf_skb(lp, skb);
-+
-+#else
- 	isdn_net_writebuf_skb(lp, skb);
-+#endif
- 	spin_unlock_bh(&lp->xmit_lock);
- 
- 	/* the following stuff is here for backwards compatibility.
-@@ -1143,6 +1524,69 @@
- 
- 	return retv;
- 
-+#if 0
-+	if (lp->cps > lp->triggercps) {
-+		/* Device overloaded */
-+
-+		/*
-+		 * Packet-delivery via round-robin over master
-+		 * and all connected slaves.
-+		 */
-+		if (lp->master) {
-+			/* Slaves always deliver themselves */
-+			spin_lock_bh(&lp->xmit_lock);
-+			if (!isdn_net_lp_busy(lp)) {
-+				isdn_net_writebuf_skb(lp, skb);
-+				ret = 0;
-+			} else {
-+				isdn_net_device_stop_queue(lp);
-+				ret = 1;
-+			}
-+			ret = isdn_net_send_skb(ndev, lp, skb);
-+			spin_unlock_bh(&lp->xmit_lock);
-+		} else {
-+			isdn_net_local *slp = (isdn_net_local *) (lp->srobin->priv);
-+			/* Master delivers via srobin and maintains srobin */
-+			if (lp->srobin == ndev) {
-+				spin_lock_bh(&lp->xmit_lock);
-+				ret = isdn_net_send_skb(ndev, lp, skb);
-+				spin_unlock_bh(&lp->xmit_lock);
-+			} else {
-+				ret = isdn_net_start_xmit(skb, lp->srobin);
-+			}
-+			lp->srobin = (slp->slave) ? slp->slave : ndev;
-+			slp = (isdn_net_local *) (lp->srobin->priv);
-+			if (!((slp->flags & ISDN_NET_CONNECTED) && (slp->dialstate == 0)))
-+				lp->srobin = ndev;
-+		}
-+		/* Slave-startup using delay-variable */
-+		if (lp->slave) {
-+			if (!lp->sqfull) {
-+				/* First time overload: set timestamp only */
-+				lp->sqfull = 1;
-+				lp->sqfull_stamp = jiffies;
-+			} else {
-+				/* subsequent overload: if slavedelay exceeded, start dialing */
-+				if ((jiffies - lp->sqfull_stamp) > lp->slavedelay)
-+					isdn_net_force_dial_lp((isdn_net_local *) lp->slave->priv);
-+			}
-+		}
-+	} else {
-+		/* Not overloaded, deliver locally */
-+		spin_lock_bh(&lp->xmit_lock);
-+		if (!isdn_net_lp_busy(lp)) {
-+			isdn_net_writebuf_skb(lp, skb);
-+			ret = 0;
-+		} else {
-+			isdn_net_device_stop_queue(lp);
-+			ret = 1;
-+		}
-+		spin_unlock_bh(&lp->xmit_lock);
-+		if (lp->sqfull && ((jiffies - lp->sqfull_stamp) > (lp->slavedelay + (10 * HZ))))
-+			lp->sqfull = 0;
-+	}
-+	return ret;
-+#endif
- }
- 
- static void
-@@ -1161,6 +1605,7 @@
- }
- 
- 
-+#ifndef COMPAT_NO_SOFTNET
- void isdn_net_tx_timeout(struct net_device * ndev)
- {
- 	isdn_net_local *lp = (isdn_net_local *) ndev->priv;
-@@ -1188,19 +1633,206 @@
- 	ndev->trans_start = jiffies;
- 	netif_wake_queue(ndev);
- }
-+#endif
- 
- /*
-  * Try sending a packet.
-  * If this interface isn't connected to a ISDN-Channel, find a free channel,
-  * and start dialing.
-  */
-+#ifdef CONFIG_ISDN_WITH_ABC
-+static int dwabc_isdn_net_start_xmit(struct sk_buff *,struct net_device *);
-+
-+static int isdn_net_start_xmit(struct sk_buff *skb, struct net_device *ndev)
-+{
-+	if(skb == NULL || ndev == NULL)
-+		return(dwabc_isdn_net_start_xmit(skb,ndev));
-+#ifdef CONFIG_ISDN_WITH_ABC_UDP_CHECK
-+	if(!(((isdn_net_local *)ndev->priv)->dw_abc_flags & 
-+		ISDN_DW_ABC_FLAG_NO_UDP_CHECK)) {
-+
-+		if(dw_abc_udp_test(skb,ndev)) {
-+			dev_kfree_skb(skb);
-+			return(0);
-+		}
-+	}
-+#endif
-+	return(dwabc_isdn_net_start_xmit(skb,ndev));
-+}
-+
-+
-+#ifdef CONFIG_ISDN_WITH_ABC
-+int isdn_auto_dial_helper(	isdn_net_local *lp,
-+							struct sk_buff *skb,
-+							int dm_manual_allowed)
-+/**********************************************************************
-+	return's:
-+		-1		dial not allowed or impossible
-+		0		interface is connected
-+		1		dial is started
-+***********************************************************************/
-+{
-+	int retw = -1;
-+	int chi;
-+	ulong flags;
-+	char *errmsg = NULL;
-+
-+#ifdef ISDN_DEBUG_NET_DUMP
-+	{
-+		char *buf = skb->data;
-+		isdn_dumppkt("S:", buf, skb->len, 40);
-+	}
-+#endif
-+	if (lp->flags & ISDN_NET_CONNECTED) 
-+		return(0);
-+
-+	save_flags(flags);
-+	cli();
-+
-+	do {
-+
-+		/* Log packet, which triggered dialing */
-+		if (dev->net_verbose)
-+			isdn_net_log_skb(skb, lp);
-+		/* only do autodial if allowed by config */
-+		if (!(ISDN_NET_DIALMODE(*lp) == ISDN_NET_DM_AUTO)) {
-+			errmsg = "dial rejected: interface not in dialmode `auto'";
-+
-+			if(dm_manual_allowed &&
-+				!(ISDN_NET_DIALMODE(*lp) == ISDN_NET_DM_MANUAL)) {
-+
-+				errmsg = 
-+				"dial rejected: interface not in dialmode `auto or manual'";
-+			}
-+			break;
-+		}
-+
-+		if (!lp->phone[1]) {
-+
-+			errmsg = "No phone number";
-+			break;
-+		}
-+
-+		if(lp->dialwait_timer <= 0) {
-+
-+			if(	lp->dialstarted > 0 &&
-+				lp->dialtimeout > 0 && 
-+				jiffies < (lp->dialstarted + lp->dialtimeout + lp->dialwait)) {
-+
-+				lp->dialwait_timer = 
-+					lp->dialstarted + lp->dialtimeout + lp->dialwait;
-+			}
-+		}
-+
-+		if(lp->dialwait_timer > 0) {
-+
-+			if(jiffies < lp->dialwait_timer) {
-+
-+				errmsg = "dial rejected: retry-time not reached";
-+				break;
-+
-+			} else lp->dialwait_timer = 0;
-+		}
-+#ifdef CONFIG_ISDN_WITH_ABC
-+		if(isdn_dwabc_is_interface_disabled(lp))
-+			break;
-+#endif
-+		/* Grab a free ISDN-Channel */
-+		if (((chi =
-+				isdn_get_free_channel(
-+					ISDN_USAGE_NET,
-+					lp->l2_proto,
-+					lp->l3_proto,
-+					lp->pre_device,
-+					lp->pre_channel,
-+#ifdef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+					(*lp->dw_out_msn) ? lp->dw_out_msn :
-+#endif
-+					lp->msn)
-+			) < 0) &&
-+			((chi =
-+				isdn_get_free_channel(
-+					ISDN_USAGE_NET,
-+					lp->l2_proto,
-+					lp->l3_proto,
-+					lp->pre_device,
-+					lp->pre_channel^1,
-+#ifdef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+					(*lp->dw_out_msn) ? lp->dw_out_msn :
-+#endif
-+					lp->msn)
-+			) < 0)) {
-+
-+				errmsg = "No channel";
-+				break;
-+		}
-+
-+		lp->dialstate = 1;
-+		/* Connect interface with channel */
-+		isdn_net_bind_channel(lp, chi);
-+#ifdef CONFIG_ISDN_PPP
-+		if (lp->p_encap == ISDN_NET_ENCAP_SYNCPPP) {
-+			/* no 'first_skb' handling for syncPPP */
-+			if (isdn_ppp_bind(lp) < 0) {
-+				isdn_net_unbind_channel(lp);
-+				break;
-+			}
-+
-+			isdn_net_dial();	/* Initiate dialing */
-+			netif_stop_queue(&lp->netdev->dev);
-+			retw = 1;
-+			break;
-+			/* let upper layer requeue skb packet */
-+		}
-+#endif
-+		/* Initiate dialing */
-+		isdn_net_dial();
-+		isdn_net_device_stop_queue(lp);
-+		retw = 1;
-+
-+	} while(0);
-+
-+	if(retw < 0 && errmsg != NULL)
-+		isdn_net_unreachable(&lp->netdev->dev, skb, errmsg);
-+
-+	restore_flags(flags);
-+	return(retw);
-+}
-+#endif
-+
-+
-+
-+static int
-+dwabc_isdn_net_start_xmit(struct sk_buff *skb, struct net_device *ndev)
-+#else
- static int
- isdn_net_start_xmit(struct sk_buff *skb, struct net_device *ndev)
-+#endif
- {
- 	isdn_net_local *lp = (isdn_net_local *) ndev->priv;
- #ifdef CONFIG_ISDN_X25
- 	struct concap_proto * cprot = lp -> netdev -> cprot;
- #endif
-+#ifdef COMPAT_NO_SOFTNET 
-+	/* some comment as with the softnet TX timeout
-+	   when this happens, it's a bug in the HL card driver
-+	   and should be fixed there, so we can supposedly get rid of 
-+	   this here at all. 
-+	   I added a debugging message to find out if it ever occurs --KG
-+	*/
-+
-+	if (ndev->tbusy) {
-+		if (jiffies - ndev->trans_start < ISDN_NET_TX_TIMEOUT)
-+			return 1;
-+		if (!lp->dialstate){
-+			lp->stats.tx_errors++;
-+			printk(KERN_WARNING "isdn_tx_timeout dev %s dialstate %d\n",
-+				ndev->name, lp->dialstate);
-+		}
-+		ndev->trans_start = jiffies;
-+		netif_wake_queue(ndev);
-+	}
-+#endif
- #ifdef CONFIG_ISDN_X25
- /* At this point hard_start_xmit() passes control to the encapsulation
-    protocol (if present).
-@@ -1220,6 +1852,40 @@
- 	} else
- #endif
- 	/* auto-dialing xmit function */
-+#ifdef CONFIG_ISDN_WITH_ABC
-+	{
-+		int r;
-+
-+		isdn_net_adjust_hdr(skb, ndev);
-+
-+		if(!(r = isdn_auto_dial_helper(lp,skb,0))) {
-+
-+			/* 
-+			** Device is connected to an ISDN channel
-+			*/ 
-+			ndev->trans_start = jiffies;
-+
-+			if (!lp->dialstate) {
-+
-+				/* 
-+				** ISDN connection is established, try sending 
-+				*/
-+				r = isdn_net_xmit(ndev, skb);
-+
-+			} else r = 1;
-+
-+			if(r)
-+				netif_stop_queue(ndev);
-+
-+		} else if(r < 0) {
-+
-+			dev_kfree_skb(skb);
-+			r = 0;
-+		}
-+
-+		return(r);
-+	}
-+#else
- 	{
- #ifdef ISDN_DEBUG_NET_DUMP
- 		u_char *buf;
-@@ -1256,6 +1922,14 @@
- 					} else
- 						lp->dialwait_timer = 0;
- 				}
-+#ifdef CONFIG_ISDN_WITH_ABC
-+				if(isdn_dwabc_is_interface_disabled(lp)) {
-+
-+					dev_kfree_skb(skb);
-+					restore_flags(flags);
-+					return(0);
-+				}
-+#endif
- 				/* Grab a free ISDN-Channel */
- 				if (((chi =
- 				     isdn_get_free_channel(
-@@ -1264,6 +1938,9 @@
- 							lp->l3_proto,
- 							lp->pre_device,
- 						 	lp->pre_channel,
-+#ifdef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+							(*lp->dw_out_msn) ? lp->dw_out_msn : 
-+#endif
- 							lp->msn)
- 							) < 0) &&
- 					((chi =
-@@ -1273,6 +1950,9 @@
- 							lp->l3_proto,
- 							lp->pre_device,
- 							lp->pre_channel^1,
-+#ifdef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+							(*lp->dw_out_msn) ? lp->dw_out_msn :
-+#endif
- 							lp->msn)
- 							) < 0)) {
- 					restore_flags(flags);
-@@ -1296,16 +1976,6 @@
- 						restore_flags(flags);
- 						return 0;	/* STN (skb to nirvana) ;) */
- 					}
--#ifdef CONFIG_IPPP_FILTER
--					if (isdn_ppp_autodial_filter(skb, lp)) {
--						isdn_ppp_free(lp);
--						isdn_net_unbind_channel(lp);
--						restore_flags(flags);
--						isdn_net_unreachable(ndev, skb, "dial rejected: packet filtered");
--						dev_kfree_skb(skb);
--						return 0;
--					}
--#endif
- 					restore_flags(flags);
- 					isdn_net_dial();	/* Initiate dialing */
- 					netif_stop_queue(ndev);
-@@ -1337,6 +2007,7 @@
- 		}
- 	}
- 	return 1;
-+#endif
- }
- 
- /*
-@@ -1356,6 +2027,9 @@
- 	if( cprot && cprot -> pops ) cprot -> pops -> close( cprot );
- #endif
- 	netif_stop_queue(dev);
-+#ifdef COMPAT_NO_SOFTNET
-+	dev->start = 0;
-+#endif
- 	if ((p = (((isdn_net_local *) dev->priv)->slave))) {
- 		/* If this interface has slaves, stop them also */
- 		while (p) {
-@@ -1776,6 +2450,10 @@
- 	}
- 
- 	switch (type) {
-+	case CISCO_TYPE_INET:
-+		skb->protocol = htons(ETH_P_IP);
-+		netif_rx(skb);
-+		break;
- 	case CISCO_TYPE_SLARP:
- 		isdn_net_ciscohdlck_slarp_in(lp, skb);
- 		goto out_free;
-@@ -1785,11 +2463,11 @@
- 				"\"no cdp enable\" on cisco.\n", lp->name);
- 		goto out_free;
- 	default:
--		/* no special cisco protocol */
--		skb->protocol = htons(type);
--		netif_rx(skb);
--		return;
-+		printk(KERN_WARNING "%s: Unknown Cisco type 0x%04x\n",
-+		       lp->name, type);
-+		goto out_free;
- 	}
-+	return;
- 
-  out_free:
- 	kfree_skb(skb);
-@@ -1803,9 +2481,19 @@
- {
- 	isdn_net_local *lp = (isdn_net_local *) ndev->priv;
- 	isdn_net_local *olp = lp;	/* original 'lp' */
-+#ifdef CONFIG_ISDN_PPP
-+	int proto = PPP_PROTOCOL(skb->data);
-+#endif
- #ifdef CONFIG_ISDN_X25
- 	struct concap_proto *cprot = lp -> netdev -> cprot;
- #endif
-+#ifdef CONFIG_ISDN_WITH_ABC
-+	struct net_device *ondev = ndev;
-+#ifdef CONFIG_ISDN_WITH_ABC_RCV_NO_HUPTIMER
-+	ulong lp_huptimer  = 0;
-+	ulong olp_huptimer = 0;
-+#endif
-+#endif
- 	lp->transcount += skb->len;
- 
- 	lp->stats.rx_packets++;
-@@ -1819,6 +2507,10 @@
- 		lp->stats.rx_packets++;
- 		lp->stats.rx_bytes += skb->len;
- 	}
-+#ifdef CONFIG_ISDN_WITH_ABC_RCV_NO_HUPTIMER
-+	lp_huptimer  = lp->huptimer;
-+	olp_huptimer = olp->huptimer;
-+#endif
- 	skb->dev = ndev;
- 	skb->pkt_type = PACKET_HOST;
- 	skb->mac.raw = skb->data;
-@@ -1840,9 +2532,40 @@
- 			/* Fall through */
- 		case ISDN_NET_ENCAP_RAWIP:
- 			/* RAW-IP without MAC-Header */
-+#ifdef CONFIG_ISDN_WITH_ABC
-+			if(olp->p_encap == ISDN_NET_ENCAP_RAWIP) {
-+
-+				ushort l = skb->len;
-+				short r = 0;
-+
-+				olp->dw_abc_bsd_bsd_rcv += l;
-+
-+				if((skb = dwabc_bsd_rx_pkt(olp,skb,ondev)) == NULL) {
-+
-+					olp->dw_abc_bsd_rcv += l;
-+					return;
-+				}
-+
-+				olp->dw_abc_bsd_rcv += skb->len;
-+
-+				if(	l != skb->len && 
-+					(r=isdn_dc2minor(olp->isdn_device,olp->isdn_channel))>=0) {
-+
-+					dev->ibytes[r] += skb->len - l;
-+					olp->stats.rx_bytes += skb->len - l;
-+
-+					if(olp != lp)
-+						lp->stats.rx_bytes += skb->len - l;
-+				}
-+			}
-+#endif
- 			olp->huptimer = 0;
- 			lp->huptimer = 0;
- 			skb->protocol = htons(ETH_P_IP);
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+			if(isdn_dwabc_conerr_ippktok(skb))
-+				lp->dw_abc_bchan_errcnt = 0;
-+#endif
- 			break;
- 		case ISDN_NET_ENCAP_CISCOHDLCK:
- 			isdn_net_ciscohdlck_receive(lp, skb);
-@@ -1862,8 +2585,22 @@
- 			break;
- #ifdef CONFIG_ISDN_PPP
- 		case ISDN_NET_ENCAP_SYNCPPP:
--			/* huptimer is done in isdn_ppp_push_higher */
-+			/*
-+			 * If encapsulation is syncppp, don't reset
-+			 * huptimer on LCP packets.
-+			 */
-+			if (proto != PPP_LCP) {
-+				olp->huptimer = 0;
-+				lp->huptimer = 0;
-+			}
- 			isdn_ppp_receive(lp->netdev, olp, skb);
-+#ifdef CONFIG_ISDN_WITH_ABC_RCV_NO_HUPTIMER
-+			if(olp->dw_abc_flags & ISDN_DW_ABC_FLAG_RCV_NO_HUPTIMER) {
-+
-+				lp->huptimer = lp_huptimer + 1;
-+				olp->huptimer = olp_huptimer+ 1;
-+			}
-+#endif
- 			return;
- #endif
- 
-@@ -1873,6 +2610,15 @@
- 			if(cprot) if(cprot -> pops)
- 				if( cprot -> pops -> data_ind){
- 					cprot -> pops -> data_ind(cprot,skb);
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+					lp->dw_abc_bchan_errcnt = 0;
-+#ifdef CONFIG_ISDN_WITH_ABC_RCV_NO_HUPTIMER
-+					if(olp->dw_abc_flags & ISDN_DW_ABC_FLAG_RCV_NO_HUPTIMER) {
-+						lp->huptimer = lp_huptimer;
-+						olp->huptimer = olp_huptimer;
-+					}
-+#endif
-+#endif
- 					return;
- 				};
- #endif /* CONFIG_ISDN_X25 */
-@@ -1882,6 +2628,15 @@
- 			return;
- 	}
- 
-+#ifdef CONFIG_ISDN_WITH_ABC
-+#ifdef CONFIG_ISDN_WITH_ABC_RCV_NO_HUPTIMER
-+	if(olp->dw_abc_flags & ISDN_DW_ABC_FLAG_RCV_NO_HUPTIMER) {
-+
-+		lp->huptimer = lp_huptimer;
-+		olp->huptimer = olp_huptimer;
-+	}
-+#endif
-+#endif
- 	netif_rx(skb);
- 	return;
- }
-@@ -2160,8 +2915,10 @@
- 	isdn_net_phone *n;
- 	ulong flags;
- 	char nr[32];
--	char *my_eaz;
--
-+#ifdef CONFIG_ISDN_WITH_ABC
-+	if(dev->net_verbose > 2)
-+		printk(KERN_DEBUG "n_fi: di=%d ch=%d idx=%d usg=0x%04X\n", di, ch, idx,dev->usage[idx]);
-+#endif
- 	/* Search name in netdev-chain */
- 	save_flags(flags);
- 	cli();
-@@ -2180,17 +2937,15 @@
- 		eaz = setup->eazmsn;
- 	if (dev->net_verbose > 1)
- 		printk(KERN_INFO "isdn_net: call from %s,%d,%d -> %s\n", nr, si1, si2, eaz);
--        /* Accept DATA and VOICE calls at this stage
--        local eaz is checked later for allowed call types */
--        if ((si1 != 7) && (si1 != 1)) {
--                restore_flags(flags);
--                if (dev->net_verbose > 1)
--                        printk(KERN_INFO "isdn_net: Service-Indicator not 1 or 7, ignored\n");
--                return 0;
--        }
--
--n = (isdn_net_phone *) 0;
--p = dev->netdev;
-+	/* Accept only calls with Si1 = 7 (Data-Transmission) */
-+	if (si1 != 7) {
-+		restore_flags(flags);
-+		if (dev->net_verbose > 1)
-+			printk(KERN_INFO "isdn_net: Service-Indicator not 7, ignored\n");
-+		return 0;
-+	}
-+	n = (isdn_net_phone *) 0;
-+	p = dev->netdev;
- 	ematch = wret = swapped = 0;
- #ifdef ISDN_DEBUG_NET_ICALL
- 	printk(KERN_DEBUG "n_fi: di=%d ch=%d idx=%d usg=%d\n", di, ch, idx,
-@@ -2210,25 +2965,8 @@
- 				break;
- 		}
- 		swapped = 0;
--                /* check acceptable call types for DOV */
--                my_eaz = isdn_map_eaz2msn(lp->msn, di);
--                if (si1 == 1) { /* it's a DOV call, check if we allow it */
--                        if (*my_eaz == 'v' || *my_eaz == 'V' ||
--			    *my_eaz == 'b' || *my_eaz == 'B')
--                                my_eaz++; /* skip to allow a match */
--                        else
--                                my_eaz = 0; /* force non match */
--                } else { /* it's a DATA call, check if we allow it */
--                        if (*my_eaz == 'b' || *my_eaz == 'B')
--                                my_eaz++; /* skip to allow a match */
--                }
--                if (my_eaz)
--                        matchret = isdn_msncmp(eaz, my_eaz);
--                else
--                        matchret = 1;
--                if (!matchret)
--                        ematch = 1;
--
-+		if (!(matchret = isdn_msncmp(eaz, isdn_map_eaz2msn(lp->msn, di))))
-+			ematch = 1;
- 		/* Remember if more numbers eventually can match */
- 		if (matchret > wret)
- 			wret = matchret;
-@@ -2236,17 +2974,122 @@
- 		printk(KERN_DEBUG "n_fi: if='%s', l.msn=%s, l.flags=%d, l.dstate=%d\n",
- 		       lp->name, lp->msn, lp->flags, lp->dialstate);
- #endif
-+#ifdef CONFIG_ISDN_WITH_ABC_CALLB
-+		if ((!matchret) &&                                        /* EAZ is matching   */
-+		    (((!(lp->flags & ISDN_NET_CONNECTED)) &&              /* but not connected */
-+		      (USG_NONE(dev->usage[idx]))) ||                     /* and ch. unused or */
-+		     (lp->dialstate == 4) || (lp->dialstate == 12) ||		/* if dialing        */
-+			  ((lp->flags & ISDN_NET_CBOUT) != 0 &&		  		/* init a callback	*/
-+			  lp->outgoing != 0 )))
-+
-+		/*
-+		** we dont stop call's anymore (both sides call's syncron)
-+		** it will be problem in any case.
-+		** both sides will make the same.
-+		** i try later to make a switch (check the phon-numbers)
-+		** to detect with side must be stop the call.
-+		*/
-+#else
- 		if ((!matchret) &&                                        /* EAZ is matching   */
- 		    (((!(lp->flags & ISDN_NET_CONNECTED)) &&              /* but not connected */
- 		      (USG_NONE(dev->usage[idx]))) ||                     /* and ch. unused or */
- 		     ((((lp->dialstate == 4) || (lp->dialstate == 12)) && /* if dialing        */
- 		       (!(lp->flags & ISDN_NET_CALLBACK)))                /* but no callback   */
- 		     )))
-+#endif
- 			 {
- #ifdef ISDN_DEBUG_NET_ICALL
- 			printk(KERN_DEBUG "n_fi: match1, pdev=%d pch=%d\n",
- 			       lp->pre_device, lp->pre_channel);
- #endif
-+#ifdef CONFIG_ISDN_WITH_ABC
-+#ifdef CONFIG_ISDN_WITH_ABC_CALLB
-+			{
-+				int use_this_call = 0;
-+
-+				if(!(lp->flags & ISDN_NET_CBOUT) && ((lp->dialstate == 4) || (lp->dialstate == 12))) {
-+
-+					/*
-+					** searching for a diff. in the calling-number and the EAZ
-+					** the remote will make the same
-+					*/
-+
-+					char *pnr = nr;
-+					char *pea = eaz;
-+
-+					for(;*pnr;pnr++);
-+					for(;*pea;pea++);
-+					for(pnr--,pea--;pnr >= nr && pea >= eaz && *pea != *pnr;pnr--,pea--);
-+
-+					if(pnr < nr || pea < eaz || *pea > *pnr) {
-+
-+						p = (isdn_net_dev *) p->next;
-+						continue;
-+					}
-+
-+					use_this_call = 1;
-+				}
-+				
-+				if( use_this_call || 
-+					((lp->flags & ISDN_NET_CBOUT) && (lp->flags & ISDN_NET_CONNECTED))) {
-+
-+					/*
-+					** the incoming call was to quick.
-+					** the callback-delay-time ist not reached.
-+					** in that case we can stop the call
-+					*/
-+
-+					if(lp->isdn_device > -1 && lp->isdn_channel > -1) {
-+
-+						int minor = isdn_dc2minor(lp->isdn_device,lp->isdn_channel);
-+
-+						if(lp->isdn_device != di || lp->isdn_channel != ch) {
-+
-+							isdn_ctrl cmd;
-+
-+							memset((void *)&cmd,0,sizeof(cmd));
-+							cmd.driver = lp->isdn_device;
-+							cmd.command = ISDN_CMD_HANGUP;
-+							cmd.arg = lp->isdn_channel;
-+							(void) dev->drv[cmd.driver]->interface->command(&cmd);
-+							isdn_all_eaz(lp->isdn_device, lp->isdn_channel);
-+
-+							if(dev->net_verbose > 1) {
-+
-+								printk(KERN_INFO 
-+				"%s: found outgoing call hangup old call on di %d ch %d\n",
-+									lp->name,lp->isdn_device,lp->isdn_channel);
-+							}
-+
-+						} else if (dev->net_verbose > 1) {
-+
-+							printk(KERN_INFO "%s: found outgoing call on same di %d ch %d\n",
-+								lp->name,lp->isdn_device,lp->isdn_channel);
-+						}
-+
-+						if(minor >= 0) {
-+
-+							dev->rx_netdev[minor] = NULL;
-+							dev->st_netdev[minor] = NULL;
-+						}
-+
-+						isdn_free_channel(lp->isdn_device,
-+							lp->isdn_channel, ISDN_USAGE_NET);
-+
-+					} else if (dev->net_verbose > 1) {
-+
-+						printk(KERN_INFO "%s: found outgoing call reset callstate \n",lp->name);
-+					}
-+
-+					lp->flags &= ~ISDN_NET_CONNECTED;
-+					lp->isdn_device = -1;
-+					lp->isdn_channel = -1;
-+					lp->dtimer = 0;
-+					lp->dialstate = 0;
-+				}
-+			}
-+#endif
-+#endif
- 			if (dev->usage[idx] & ISDN_USAGE_EXCLUSIVE) {
- 				if ((lp->pre_channel != ch) ||
- 				    (lp->pre_device != di)) {
-@@ -2375,6 +3218,12 @@
- 						continue;
- 					}
- 				} 
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+				if(isdn_dwabc_is_interface_disabled(lp)) {
-+					restore_flags(flags);
-+					return 3;
-+				}
-+#endif
- 				if (lp->flags & ISDN_NET_CALLBACK) {
- 					int chi;
- 					/*
-@@ -2427,6 +3276,47 @@
- 					restore_flags(flags);
- 					return 0;
- 				} else {
-+#ifdef CONFIG_ISDN_WITH_ABC_CALLB
-+					{
-+					/*
-+					** this is a sanity-check.
-+					** check for double use (device and channel)
-+					** will be very near to a kernel-crash in that case
-+					*/
-+					isdn_net_dev *sp = dev->netdev;
-+					int s_shl;
-+					isdn_net_local *ml;
-+
-+					for(s_shl=0; s_shl < 2048 && sp != NULL; sp = (isdn_net_dev *)sp->next, s_shl++) {
-+
-+						if(sp == p || (ml = sp->local) == NULL)
-+							continue;
-+
-+						if(ml->isdn_device != di || ml->isdn_channel != ch)
-+							continue;
-+
-+						if(ml->dialstate != 4 && ml->dialstate != 12) {
-+
-+							/*
-+							** wrong situation
-+							*/
-+							break;
-+						}
-+
-+						isdn_net_unbind_channel(ml);
-+					}
-+
-+					if(sp != NULL) {
-+
-+						printk(KERN_DEBUG
-+"%s: call from %s -> %s (drv %d chan %d duplicated with %s) \n",
-+							lp->name, nr, eaz,di,ch,
-+							sp->local->name	);
-+
-+						restore_flags(flags);
-+						return 3;
-+					}}
-+#endif
- 					printk(KERN_DEBUG "%s: call from %s -> %s accepted\n", lp->name, nr,
- 					       eaz);
- 					/* if this interface is dialing, it does it probably on a different
-@@ -2516,7 +3406,11 @@
- 							lp->l3_proto,
- 							lp->pre_device,
- 						 	lp->pre_channel,
-+#ifdef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+							(*lp->dw_out_msn) ? lp->dw_out_msn : lp->msn)
-+#else
- 							lp->msn)
-+#endif
- 							) < 0) {
- 				printk(KERN_WARNING "isdn_net_force_dial: No channel for %s\n", lp->name);
- 				restore_flags(flags);
-@@ -2599,7 +3493,11 @@
- 		strcpy(netdev->local->name, "         ");
- 	else
- 		strcpy(netdev->local->name, name);
-+#ifdef COMPAT_NO_SOFTNET
-+	netdev->dev.name = netdev->local->name;
-+#else
- 	strcpy(netdev->dev.name, netdev->local->name);
-+#endif
- 	netdev->dev.priv = netdev->local;
- 	netdev->dev.init = isdn_net_init;
- 	netdev->local->p_encap = ISDN_NET_ENCAP_RAWIP;
-@@ -2617,11 +3515,13 @@
- 		((isdn_net_local *) q->priv)->slave = &(netdev->dev);
- 	} else {
- 		/* Device shall be a master */
-+#ifndef COMPAT_NO_SOFTNET
- 		/*
- 		 * Watchdog timer (currently) for master only.
- 		 */
- 		netdev->dev.tx_timeout = isdn_net_tx_timeout;
- 		netdev->dev.watchdog_timeo = ISDN_NET_TX_TIMEOUT;
-+#endif
- 		if (register_netdev(&netdev->dev) != 0) {
- 			printk(KERN_WARNING "isdn_net: Could not register net-device\n");
- 			kfree(netdev->local);
-@@ -2658,6 +3558,9 @@
- 	netdev->local->hupflags = ISDN_INHUP;	/* Do hangup even on incoming calls */
- 	netdev->local->onhtime = 10;	/* Default hangup-time for saving costs
- 	   of those who forget configuring this */
-+#ifdef CONFIG_ISDN_WITH_ABC 
-+	netdev->local->dw_abc_old_onhtime = netdev->local->onhtime;
-+#endif
- 	netdev->local->dialmax = 1;
- 	netdev->local->flags = ISDN_NET_CBHUP | ISDN_NET_DM_MANUAL;	/* Hangup before Callback, manual dial */
- 	netdev->local->cbdelay = 25;	/* Wait 5 secs before Callback */
-@@ -2831,7 +3734,6 @@
- 
- 			/* If binding is exclusive, try to grab the channel */
- 			save_flags(flags);
--			cli();
- 			if ((i = isdn_get_free_channel(ISDN_USAGE_NET,
- 				lp->l2_proto, lp->l3_proto, drvidx,
- 				chidx, lp->msn)) < 0) {
-@@ -2859,6 +3761,9 @@
- 		lp->pre_device = drvidx;
- 		lp->pre_channel = chidx;
- 		lp->onhtime = cfg->onhtime;
-+#ifdef CONFIG_ISDN_WITH_ABC 
-+		lp->dw_abc_old_onhtime = lp->onhtime;
-+#endif
- 		lp->charge = cfg->charge;
- 		lp->l2_proto = cfg->l2_proto;
- 		lp->l3_proto = cfg->l3_proto;
-@@ -2932,6 +3837,9 @@
- 			}
- 		}
- 		lp->p_encap = cfg->p_encap;
-+#ifdef CONFIG_ISDN_WITH_ABC 
-+		isdn_dw_abc_reset_interface(lp,0);
-+#endif
- 		return 0;
- 	}
- 	return -ENODEV;
-@@ -3007,6 +3915,9 @@
- 		strcpy(n->num, phone->phone);
- 		n->next = p->local->phone[phone->outgoing & 1];
- 		p->local->phone[phone->outgoing & 1] = n;
-+#ifdef CONFIG_ISDN_WITH_ABC
-+		isdn_dwabc_test_phone(p->local);
-+#endif
- 		return 0;
- 	}
- 	return -ENODEV;
-@@ -3100,6 +4011,9 @@
- 				else
- 					p->local->phone[inout] = n->next;
- 				kfree(n);
-+#ifdef CONFIG_ISDN_WITH_ABC
-+				isdn_dwabc_test_phone(p->local);
-+#endif
- 				restore_flags(flags);
- 				return 0;
- 			}
-@@ -3135,6 +4049,9 @@
- 		p->local->phone[i] = NULL;
- 	}
- 	p->local->dial = NULL;
-+#ifdef CONFIG_ISDN_WITH_ABC
-+	isdn_dwabc_test_phone(p->local);
-+#endif
- 	restore_flags(flags);
- 	return 0;
- }
-@@ -3218,6 +4135,10 @@
- 	/* If no more net-devices remain, disable auto-hangup timer */
- 	if (dev->netdev == NULL)
- 		isdn_timer_ctrl(ISDN_TIMER_NETHANGUP, 0);
-+#ifdef CONFIG_ISDN_WITH_ABC
-+	isdn_dw_clear_if(~0l,p->local);
-+	dwabc_bsd_free(p->local);
-+#endif
- 	restore_flags(flags);
- 	kfree(p->local);
- 	kfree(p);
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_net.h linux-2.4.29/drivers/isdn/isdn_net.h
---- linux-2.4.29.old/drivers/isdn/isdn_net.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_net.h	2005-03-22 15:06:44.463333328 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_net.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_net.h,v 1.23 2001/11/07 22:35:48 kai Exp $
-  *
-  * header for Linux ISDN subsystem, network related functions (linklevel).
-  *
-@@ -26,6 +26,7 @@
- #define CISCO_ADDR_BROADCAST  0x8f
- #define CISCO_CTRL            0x00
- #define CISCO_TYPE_CDP        0x2000
-+#define CISCO_TYPE_INET       0x0800
- #define CISCO_TYPE_SLARP      0x8035
- #define CISCO_SLARP_REQUEST   0
- #define CISCO_SLARP_REPLY     1
-@@ -106,8 +107,6 @@
- 	spin_lock_irqsave(&nd->queue_lock, flags);
- 
- 	lp = nd->queue;
--//	printk(KERN_DEBUG __FUNCTION__": lp:%s(%p) nlp:%s(%p) last(%p)\n",
--//		lp->name, lp, nlp->name, nlp, lp->last); 
- 	nlp->last = lp->last;
- 	lp->last->next = nlp;
- 	lp->last = nlp;
-@@ -127,20 +126,12 @@
- 	if (lp->master)
- 		master_lp = (isdn_net_local *) lp->master->priv;
- 
--//	printk(KERN_DEBUG __FUNCTION__": lp:%s(%p) mlp:%s(%p) last(%p) next(%p) mndq(%p)\n",
--//		lp->name, lp, master_lp->name, master_lp, lp->last, lp->next, master_lp->netdev->queue); 
- 	spin_lock_irqsave(&master_lp->netdev->queue_lock, flags);
- 	lp->last->next = lp->next;
- 	lp->next->last = lp->last;
--	if (master_lp->netdev->queue == lp) {
-+	if (master_lp->netdev->queue == lp)
- 		master_lp->netdev->queue = lp->next;
--		if (lp->next == lp) { /* last in queue */
--			master_lp->netdev->queue = master_lp->netdev->local;
--		}
--	}
- 	lp->next = lp->last = lp;	/* (re)set own pointers */
--//	printk(KERN_DEBUG __FUNCTION__": mndq(%p)\n",
--//		master_lp->netdev->queue); 
- 	spin_unlock_irqrestore(&master_lp->netdev->queue_lock, flags);
- }
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_ppp.c linux-2.4.29/drivers/isdn/isdn_ppp.c
---- linux-2.4.29.old/drivers/isdn/isdn_ppp.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_ppp.c	2005-03-22 15:06:44.481330592 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_ppp.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_ppp.c,v 1.94 2001/11/07 22:35:48 kai Exp $
-  *
-  * Linux ISDN subsystem, functions for synchronous PPP (linklevel).
-  *
-@@ -13,9 +13,6 @@
- #include <linux/isdn.h>
- #include <linux/poll.h>
- #include <linux/ppp-comp.h>
--#ifdef CONFIG_IPPP_FILTER
--#include <linux/filter.h>
--#endif
- 
- #include "isdn_common.h"
- #include "isdn_ppp.h"
-@@ -72,11 +69,19 @@
- static int isdn_ppp_bundle(struct ippp_struct *, int unit);
- #endif	/* CONFIG_ISDN_MPP */
-   
--char *isdn_ppp_revision = "$Revision: 1.1.4.1 $";
-+char *isdn_ppp_revision = "$Revision: 1.94 $";
- 
- static struct ippp_struct *ippp_table[ISDN_MAX_CHANNELS];
- 
-+#ifndef CONFIG_ISDN_WITH_ABC
- static struct isdn_ppp_compressor *ipc_head = NULL;
-+#else
-+	/*
-+	** make compressor's common usable
-+	*/
-+struct isdn_ppp_compressor *isdn_ippp_comp_head = NULL;
-+#define ipc_head isdn_ippp_comp_head
-+#endif
- 
- /*
-  * frame log (debug)
-@@ -110,11 +115,8 @@
- 	unsigned long flags;
- 	struct ippp_struct *is;
- 
--	if (lp->ppp_slot < 0 || lp->ppp_slot > ISDN_MAX_CHANNELS) {
--		printk(KERN_ERR "%s: ppp_slot(%d) out of range\n",
--			__FUNCTION__, lp->ppp_slot);
-+	if (lp->ppp_slot < 0 || lp->ppp_slot > ISDN_MAX_CHANNELS)
- 		return 0;
--	}
- 
- 	save_flags(flags);
- 	cli();
-@@ -130,12 +132,7 @@
- 	lp->netdev->pb->ref_ct--;
- 	spin_unlock(&lp->netdev->pb->lock);
- #endif /* CONFIG_ISDN_MPP */
--	if (lp->ppp_slot < 0 || lp->ppp_slot > ISDN_MAX_CHANNELS) {
--		printk(KERN_ERR "%s: ppp_slot(%d) now invalid\n",
--			__FUNCTION__, lp->ppp_slot);
--		restore_flags(flags);
--		return 0;
--	}
-+
- 	is = ippp_table[lp->ppp_slot];
- 	if ((is->state & IPPP_CONNECT))
- 		isdn_ppp_closewait(lp->ppp_slot);	/* force wakeup on ippp device */
-@@ -231,13 +228,12 @@
- void
- isdn_ppp_wakeup_daemon(isdn_net_local * lp)
- {
--	if (lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS) {
--		printk(KERN_ERR "%s: ppp_slot(%d) out of range\n",
--			__FUNCTION__, lp->ppp_slot);
-+	if (lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS)
- 		return;
--	}
-+
- 	ippp_table[lp->ppp_slot]->state = IPPP_OPEN | IPPP_CONNECT | IPPP_NOBLOCK;
--	wake_up_interruptible(&ippp_table[lp->ppp_slot]->wq);
-+
-+		wake_up_interruptible(&ippp_table[lp->ppp_slot]->wq);
- }
- 
- /*
-@@ -250,14 +246,13 @@
- {
- 	struct ippp_struct *is;
- 
--	if (slot < 0 || slot >= ISDN_MAX_CHANNELS) {
--		printk(KERN_ERR "%s: slot(%d) out of range\n",
--			__FUNCTION__, slot);
-+	if (slot < 0 || slot >= ISDN_MAX_CHANNELS)
- 		return 0;
--	}
- 	is = ippp_table[slot];
-+
- 	if (is->state)
- 		wake_up_interruptible(&is->wq);
-+
- 	is->state = IPPP_CLOSEWAIT;
- 	return 1;
- }
-@@ -295,9 +290,11 @@
- 		return -EBUSY;
- 	}
- 	is = file->private_data = ippp_table[slot];
--	
--	printk(KERN_DEBUG "ippp, open, slot: %d, minor: %d, state: %04x\n",
--	       slot, min, is->state);
-+
-+#if 0
-+	if (is->debug & 0x1)
-+#endif
-+		printk(KERN_DEBUG "ippp, open, slot: %d, minor: %d, state: %04x\n", slot, min, is->state);
- 
- 	/* compression stuff */
- 	is->link_compressor   = is->compressor = NULL;
-@@ -327,10 +324,7 @@
- 	 */
- 	is->slcomp = slhc_init(16, 16);	/* not necessary for 2. link in bundle */
- #endif
--#ifdef CONFIG_IPPP_FILTER
--	is->pass_filter.filter = NULL;
--	is->active_filter.filter = NULL;
--#endif
-+
- 	is->state = IPPP_OPEN;
- 
- 	return 0;
-@@ -349,20 +343,12 @@
- 		return;
- 	is = file->private_data;
- 
--	if (!is) {
--		printk(KERN_ERR "%s: no file->private_data\n", __FUNCTION__);
--		return;
--	}
- 	if (is->debug & 0x1)
- 		printk(KERN_DEBUG "ippp: release, minor: %d %lx\n", min, (long) is->lp);
- 
- 	if (is->lp) {           /* a lp address says: this link is still up */
- 		isdn_net_dev *p = is->lp->netdev;
- 
--		if (!p) {
--			printk(KERN_ERR "%s: no lp->netdev\n", __FUNCTION__);
--			return;
--		}
- 		is->state &= ~IPPP_CONNECT;	/* -> effect: no call of wakeup */
- 		/*
- 		 * isdn_net_hangup() calls isdn_ppp_free()
-@@ -385,18 +371,8 @@
- 	slhc_free(is->slcomp);
- 	is->slcomp = NULL;
- #endif
--#ifdef CONFIG_IPPP_FILTER
--	if (is->pass_filter.filter) {
--		kfree(is->pass_filter.filter);
--		is->pass_filter.filter = NULL;
--	}
--	if (is->active_filter.filter) {
--		kfree(is->active_filter.filter);
--		is->active_filter.filter = NULL;
--	}
--#endif
- 
--/* TODO: if this was the previous master: link the stuff to the new master */
-+/* TODO: if this was the previous master: link the the stuff to the new master */
- 	if(is->comp_stat)
- 		is->compressor->free(is->comp_stat);
- 	if(is->link_comp_stat)
-@@ -509,13 +485,15 @@
- 			if (val & SC_ENABLE_IP && !(is->pppcfg & SC_ENABLE_IP) && (is->state & IPPP_CONNECT)) {
- 				if (lp) {
- 					/* OK .. we are ready to send buffers */
--					is->pppcfg = val; /* isdn_ppp_xmit test for SC_ENABLE_IP !!! */
- 					netif_wake_queue(&lp->netdev->dev);
--					break;
- 				}
- 			}
- 			is->pppcfg = val;
- 			break;
-+#if 0
-+		case PPPIOCGSTAT:	/* read PPP statistic information */
-+			break;
-+#endif
- 		case PPPIOCGIDLE:	/* get idle time information */
- 			if (lp) {
- 				struct ppp_idle pidle;
-@@ -604,39 +582,6 @@
- 				}
- 				return set_arg((void *)arg,&pci,sizeof(struct pppcallinfo));
- 			}
--#ifdef CONFIG_IPPP_FILTER
--		case PPPIOCSPASS:
--		case PPPIOCSACTIVE:
--			{
--				struct sock_fprog uprog, *filtp;
--				struct sock_filter *code = NULL;
--				int len, err;
--
--				if (copy_from_user(&uprog, (void *) arg, sizeof(uprog)))
--					return -EFAULT;
--				if (uprog.len > 0 && uprog.len < 65536) {
--					len = uprog.len * sizeof(struct sock_filter);
--					code = kmalloc(len, GFP_KERNEL);
--					if (code == NULL)
--						return -ENOMEM;
--					if (copy_from_user(code, uprog.filter, len)) {
--						kfree(code);
--						return -EFAULT;
--					}
--					err = sk_chk_filter(code, uprog.len);
--					if (err) {
--						kfree(code);
--						return err;
--					}
--				}
--				filtp = (cmd == PPPIOCSPASS) ? &is->pass_filter : &is->active_filter;
--				if (filtp->filter)
--					kfree(filtp->filter);
--				filtp->filter = code;
--				filtp->len = uprog.len;
--				break;
--			}
--#endif /* CONFIG_IPPP_FILTER */
- 		default:
- 			break;
- 	}
-@@ -699,7 +644,7 @@
- 	struct ippp_struct *is;
- 
- 	if (slot < 0 || slot >= ISDN_MAX_CHANNELS) {
--		printk(KERN_WARNING "ippp: illegal slot(%d).\n", slot);
-+		printk(KERN_WARNING "ippp: illegal slot.\n");
- 		return 0;
- 	}
- 	is = ippp_table[slot];
-@@ -976,8 +921,7 @@
- 
- 	slot = lp->ppp_slot;
- 	if (slot < 0 || slot > ISDN_MAX_CHANNELS) {
--		printk(KERN_ERR "isdn_ppp_receive: lp->ppp_slot(%d)\n",
--			lp->ppp_slot);
-+		printk(KERN_ERR "isdn_ppp_receive: lp->ppp_slot %d\n", lp->ppp_slot);
- 		kfree_skb(skb);
- 		return;
- 	}
-@@ -1026,23 +970,19 @@
- {
- 	struct net_device *dev = &net_dev->dev;
-  	struct ippp_struct *is, *mis;
--	isdn_net_local *mlp = NULL;
- 	int slot;
- 
- 	slot = lp->ppp_slot;
- 	if (slot < 0 || slot > ISDN_MAX_CHANNELS) {
--		printk(KERN_ERR "isdn_ppp_push_higher: lp->ppp_slot(%d)\n",
--			lp->ppp_slot);
-+		printk(KERN_ERR "isdn_ppp_push_higher: lp->ppp_slot %d\n", lp->ppp_slot);
- 		goto drop_packet;
- 	}
- 	is = ippp_table[slot];
-  	
-  	if (lp->master) { // FIXME?
--		mlp = (isdn_net_local *) lp->master->priv;
-- 		slot = mlp->ppp_slot;
-+ 		slot = ((isdn_net_local *) (lp->master->priv))->ppp_slot;
-  		if (slot < 0 || slot > ISDN_MAX_CHANNELS) {
-- 			printk(KERN_ERR "isdn_ppp_push_higher: master->ppp_slot(%d)\n",
-- 				lp->ppp_slot);
-+ 			printk(KERN_ERR "isdn_ppp_push_higher: master->ppp_slot %d\n", lp->ppp_slot);
- 			goto drop_packet;
-  		}
-  	}
-@@ -1076,11 +1016,6 @@
- 		case PPP_VJC_UNCOMP:
- 			if (is->debug & 0x20)
- 				printk(KERN_DEBUG "isdn_ppp: VJC_UNCOMP\n");
--			if (net_dev->local->ppp_slot < 0) {
--				printk(KERN_ERR "%s: net_dev->local->ppp_slot(%d) out of range\n",
--					__FUNCTION__, net_dev->local->ppp_slot);
--				goto drop_packet;
--			}
- 			if (slhc_remember(ippp_table[net_dev->local->ppp_slot]->slcomp, skb->data, skb->len) <= 0) {
- 				printk(KERN_WARNING "isdn_ppp: received illegal VJC_UNCOMP frame!\n");
- 				goto drop_packet;
-@@ -1102,11 +1037,6 @@
- 				}
- 				skb_put(skb, skb_old->len + 128);
- 				memcpy(skb->data, skb_old->data, skb_old->len);
--				if (net_dev->local->ppp_slot < 0) {
--					printk(KERN_ERR "%s: net_dev->local->ppp_slot(%d) out of range\n",
--						__FUNCTION__, net_dev->local->ppp_slot);
--					goto drop_packet;
--				}
- 				pkt_len = slhc_uncompress(ippp_table[net_dev->local->ppp_slot]->slcomp,
- 						skb->data, skb_old->len);
- 				kfree_skb(skb_old);
-@@ -1133,36 +1063,12 @@
- 			return;
- 	}
- 
--#ifdef CONFIG_IPPP_FILTER
--	/* check if the packet passes the pass and active filters
--	 * the filter instructions are constructed assuming
--	 * a four-byte PPP header on each packet (which is still present) */
--	skb_push(skb, 4);
--	skb->data[0] = 0;	/* indicate inbound */
--
--	if (is->pass_filter.filter
--	    && sk_run_filter(skb, is->pass_filter.filter,
--	                    is->pass_filter.len) == 0) {
--		if (is->debug & 0x2)
--			printk(KERN_DEBUG "IPPP: inbound frame filtered.\n");
--		kfree_skb(skb);
--		return;
--	}
--	if (!(is->active_filter.filter
--	      && sk_run_filter(skb, is->active_filter.filter,
--	                       is->active_filter.len) == 0)) {
--		if (is->debug & 0x2)
--			printk(KERN_DEBUG "IPPP: link-active filter: reseting huptimer.\n");
--		lp->huptimer = 0;
--		if (mlp)
--			mlp->huptimer = 0;
--	}
--	skb_pull(skb, 4);
--#else /* CONFIG_IPPP_FILTER */
--	lp->huptimer = 0;
--	if (mlp)
--		mlp->huptimer = 0;
--#endif /* CONFIG_IPPP_FILTER */
-+ 	/* Reset hangup-timer */
-+ 	lp->huptimer = 0;
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+	lp->dw_abc_bchan_errcnt = 0;
-+#endif
-+
- 	skb->dev = dev;
- 	skb->mac.raw = skb->data;
- 	netif_rx(skb);
-@@ -1199,6 +1105,7 @@
- 	return skb_push(skb,len);
- }
- 
-+
- /*
-  * send ppp frame .. we expect a PIDCOMPressable proto --
-  *  (here: currently always PPP_IP,PPP_VJC_COMP,PPP_VJC_UNCOMP)
-@@ -1214,25 +1121,23 @@
- 	isdn_net_dev *nd;
- 	unsigned int proto = PPP_IP;     /* 0x21 */
- 	struct ippp_struct *ipt,*ipts;
--	int slot, retval = 0;
-+	int slot;
- 
- 	mlp = (isdn_net_local *) (netdev->priv);
- 	nd = mlp->netdev;       /* get master lp */
- 
- 	slot = mlp->ppp_slot;
- 	if (slot < 0 || slot > ISDN_MAX_CHANNELS) {
--		printk(KERN_ERR "isdn_ppp_xmit: lp->ppp_slot(%d)\n",
--			mlp->ppp_slot);
-+		printk(KERN_ERR "isdn_ppp_xmit: lp->ppp_slot %d\n", mlp->ppp_slot);
- 		kfree_skb(skb);
--		goto out;
-+		return 0;
- 	}
- 	ipts = ippp_table[slot];
- 
- 	if (!(ipts->pppcfg & SC_ENABLE_IP)) {	/* PPP connected ? */
- 		if (ipts->debug & 0x1)
- 			printk(KERN_INFO "%s: IP frame delayed.\n", netdev->name);
--		retval = 1;
--		goto out;
-+		return 1;
- 	}
- 
- 	switch (ntohs(skb->protocol)) {
-@@ -1246,25 +1151,24 @@
- 			printk(KERN_ERR "isdn_ppp: skipped unsupported protocol: %#x.\n", 
- 			       skb->protocol);
- 			dev_kfree_skb(skb);
--			goto out;
-+			return 0;
- 	}
- 
- 	lp = isdn_net_get_locked_lp(nd);
- 	if (!lp) {
- 		printk(KERN_WARNING "%s: all channels busy - requeuing!\n", netdev->name);
--		retval = 1;
--		goto out;
-+		return 1;
- 	}
- 	/* we have our lp locked from now on */
- 
- 	slot = lp->ppp_slot;
- 	if (slot < 0 || slot > ISDN_MAX_CHANNELS) {
--		printk(KERN_ERR "isdn_ppp_xmit: lp->ppp_slot(%d)\n",
--			lp->ppp_slot);
-+		printk(KERN_ERR "isdn_ppp_xmit: lp->ppp_slot %d\n", lp->ppp_slot);
- 		kfree_skb(skb);
--		goto unlock;
-+		return 0;
- 	}
- 	ipt = ippp_table[slot];
-+	lp->huptimer = 0;
- 
- 	/*
- 	 * after this line .. requeueing in the device queue is no longer allowed!!!
-@@ -1275,34 +1179,6 @@
- 	 */
- 	skb_pull(skb,IPPP_MAX_HEADER);
- 
--#ifdef CONFIG_IPPP_FILTER
--	/* check if we should pass this packet
--	 * the filter instructions are constructed assuming
--	 * a four-byte PPP header on each packet */
--	skb_push(skb, 4);
--	skb->data[0] = 1;	/* indicate outbound */
--	*(u_int16_t *)(skb->data + 2) = htons(proto);
--
--	if (ipt->pass_filter.filter 
--	    && sk_run_filter(skb, ipt->pass_filter.filter,
--		             ipt->pass_filter.len) == 0) {
--		if (ipt->debug & 0x4)
--			printk(KERN_DEBUG "IPPP: outbound frame filtered.\n");
--		kfree_skb(skb);
--		goto unlock;
--	}
--	if (!(ipt->active_filter.filter
--	      && sk_run_filter(skb, ipt->active_filter.filter,
--		               ipt->active_filter.len) == 0)) {
--		if (ipt->debug & 0x4)
--			printk(KERN_DEBUG "IPPP: link-active filter: reseting huptimer.\n");
--		lp->huptimer = 0;
--	}
--	skb_pull(skb, 4);
--#else /* CONFIG_IPPP_FILTER */
--	lp->huptimer = 0;
--#endif /* CONFIG_IPPP_FILTER */
--
- 	if (ipt->debug & 0x4)
- 		printk(KERN_DEBUG "xmit skb, len %d\n", (int) skb->len);
-         if (ipts->debug & 0x40)
-@@ -1440,54 +1316,9 @@
- 
-  unlock:
- 	spin_unlock_bh(&lp->xmit_lock);
-- out:
--	return retval;
-+	return 0;
- }
- 
--#ifdef CONFIG_IPPP_FILTER
--/*
-- * check if this packet may trigger auto-dial.
-- */
--
--int isdn_ppp_autodial_filter(struct sk_buff *skb, isdn_net_local *lp)
--{
--	struct ippp_struct *is = ippp_table[lp->ppp_slot];
--	u_int16_t proto;
--	int drop = 0;
--
--	switch (ntohs(skb->protocol)) {
--	case ETH_P_IP:
--		proto = PPP_IP;
--		break;
--	case ETH_P_IPX:
--		proto = PPP_IPX;
--		break;
--	default:
--		printk(KERN_ERR "isdn_ppp_autodial_filter: unsupported protocol 0x%x.\n",
--		       skb->protocol);
--		return 1;
--	}
--
--	/* the filter instructions are constructed assuming
--	 * a four-byte PPP header on each packet. we have to
--	 * temporarily remove part of the fake header stuck on
--	 * earlier.
--	 */
--	skb_pull(skb, IPPP_MAX_HEADER - 4);
--	skb->data[0] = 1;	/* indicate outbound */
--	*(u_int16_t *)(skb->data + 2) = htons(proto);
--	
--	drop |= is->pass_filter.filter
--	        && sk_run_filter(skb, is->pass_filter.filter,
--	                         is->pass_filter.len) == 0;
--	drop |= is->active_filter.filter
--	        && sk_run_filter(skb, is->active_filter.filter,
--	                         is->active_filter.len) == 0;
--	
--	skb_push(skb, IPPP_MAX_HEADER - 4);
--	return drop;
--}
--#endif
- #ifdef CONFIG_ISDN_MPP
- 
- /* this is _not_ rfc1990 header, but something we convert both short and long
-@@ -1537,15 +1368,8 @@
- 
- static int isdn_ppp_mp_init( isdn_net_local * lp, ippp_bundle * add_to )
- {
--	struct ippp_struct * is;
--
--	if (lp->ppp_slot < 0) {
--		printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n",
--			__FUNCTION__, lp->ppp_slot);
--		return(-EINVAL);
--	}
--
--	is = ippp_table[lp->ppp_slot];
-+	struct ippp_struct * is = ippp_table[lp->ppp_slot];
-+   
- 	if (add_to) {
- 		if( lp->netdev->pb )
- 			lp->netdev->pb->ref_ct--;
-@@ -1591,8 +1415,7 @@
-         stats = &mp->stats;
- 	slot = lp->ppp_slot;
- 	if (slot < 0 || slot > ISDN_MAX_CHANNELS) {
--		printk(KERN_ERR "%s: lp->ppp_slot(%d)\n",
--			__FUNCTION__, lp->ppp_slot);
-+		printk(KERN_ERR "isdn_ppp_mp_receive: lp->ppp_slot %d\n", lp->ppp_slot);
- 		stats->frame_drops++;
- 		dev_kfree_skb(skb);
- 		spin_unlock_irqrestore(&mp->lock, flags);
-@@ -1628,8 +1451,7 @@
- 	for (lpq = net_dev->queue;;) {
- 		slot = lpq->ppp_slot;
- 		if (slot < 0 || slot > ISDN_MAX_CHANNELS) {
--			printk(KERN_ERR "%s: lpq->ppp_slot(%d)\n",
--				__FUNCTION__, lpq->ppp_slot);
-+			printk(KERN_ERR "isdn_ppp_mp_receive: lpq->ppp_slot %d\n", lpq->ppp_slot);
- 		} else {
- 			u32 lls = ippp_table[slot]->last_link_seqno;
- 			if (MP_LT(lls, minseq))
-@@ -1861,14 +1683,9 @@
- 	struct sk_buff * skb;
- 	unsigned int tot_len;
- 
--	if (lp->ppp_slot < 0 || lp->ppp_slot > ISDN_MAX_CHANNELS) {
--		printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n",
--			__FUNCTION__, lp->ppp_slot);
--		return;
--	}
- 	if( MP_FLAGS(from) == (MP_BEGIN_FRAG | MP_END_FRAG) ) {
- 		if( ippp_table[lp->ppp_slot]->debug & 0x40 )
--			printk(KERN_DEBUG "isdn_mppp: reassembly: frame %d, "
-+			printk(KERN_DEBUG"isdn_mppp: reassembly: frame %d, "
- 					"len %d\n", MP_SEQ(from), from->len );
- 		skb = from;
- 		skb_pull(skb, MP_HEADER_LEN);
-@@ -1987,10 +1804,8 @@
- 	memset(&t, 0, sizeof(struct ppp_stats));
- 	if (dev->flags & IFF_UP) {
- 		t.p.ppp_ipackets = lp->stats.rx_packets;
--		t.p.ppp_ibytes = lp->stats.rx_bytes;
- 		t.p.ppp_ierrors = lp->stats.rx_errors;
- 		t.p.ppp_opackets = lp->stats.tx_packets;
--		t.p.ppp_obytes = lp->stats.tx_bytes;
- 		t.p.ppp_oerrors = lp->stats.tx_errors;
- #ifdef CONFIG_ISDN_PPP_VJ
- 		if (slot >= 0 && ippp_table[slot]->slcomp) {
-@@ -2018,6 +1833,9 @@
- 	int len;
- 	isdn_net_local *lp = (isdn_net_local *) dev->priv;
- 
-+#if 0
-+	printk(KERN_DEBUG "ippp, dev_ioctl: cmd %#08x , %d \n", cmd, lp->ppp_slot);
-+#endif
- 
- 	if (lp->p_encap != ISDN_NET_ENCAP_SYNCPPP)
- 		return -EINVAL;
-@@ -2431,7 +2249,7 @@
- 				return;
- 			}
- 			rs->state = CCPResetSentReq;
--			/* We always expect an Ack if the decompressor doesn't
-+			/* We always expect an Ack if the decompressor doesnt
- 			   know	better */
- 			rs->expra = 1;
- 			rs->dlen = 0;
-@@ -2582,7 +2400,13 @@
-     }
- 
- 	if(type) { /* type=1 => Link compression */
-+#if 0
-+		compressor = is->link_compressor;
-+		stat = is->link_comp_stat;
-+		new_proto = PPP_LINK_COMP;
-+#else
- 		return skb_in;
-+#endif
- 	}
- 	else {
- 		if(!master) {
-@@ -2630,31 +2454,18 @@
- static void isdn_ppp_receive_ccp(isdn_net_dev *net_dev, isdn_net_local *lp,
- 	 struct sk_buff *skb,int proto)
- {
--	struct ippp_struct *is;
-+	struct ippp_struct *is = ippp_table[lp->ppp_slot];
- 	struct ippp_struct *mis;
- 	int len;
- 	struct isdn_ppp_resetparams rsparm;
- 	unsigned char rsdata[IPPP_RESET_MAXDATABYTES];	
- 
--	printk(KERN_DEBUG "Received CCP frame from peer slot(%d)\n",
--		lp->ppp_slot);
--	if (lp->ppp_slot < 0 || lp->ppp_slot > ISDN_MAX_CHANNELS) {
--		printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n",
--			__FUNCTION__, lp->ppp_slot);
--		return;
--	}
--	is = ippp_table[lp->ppp_slot];
-+	printk(KERN_DEBUG "Received CCP frame from peer\n");
- 	isdn_ppp_frame_log("ccp-rcv", skb->data, skb->len, 32, is->unit,lp->ppp_slot);
- 
--	if(lp->master) {
--		int slot = ((isdn_net_local *) (lp->master->priv))->ppp_slot;
--		if (slot < 0 || slot > ISDN_MAX_CHANNELS) {
--			printk(KERN_ERR "%s: slot(%d) out of range\n",
--				__FUNCTION__, slot);
--			return;
--		}	
--		mis = ippp_table[slot];
--	} else
-+	if(lp->master)
-+		mis = ippp_table[((isdn_net_local *) (lp->master->priv))->ppp_slot];
-+	else
- 		mis = is;
- 
- 	switch(skb->data[0]) {
-@@ -2806,18 +2617,13 @@
- 
- static void isdn_ppp_send_ccp(isdn_net_dev *net_dev, isdn_net_local *lp, struct sk_buff *skb)
- {
--	struct ippp_struct *mis,*is;
--	int proto, slot = lp->ppp_slot;
-+	struct ippp_struct *mis,*is = ippp_table[lp->ppp_slot];
-+	int proto;
- 	unsigned char *data;
- 
- 	if(!skb || skb->len < 3)
- 		return;
--	if (slot < 0 || slot > ISDN_MAX_CHANNELS) {
--		printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n",
--			__FUNCTION__, slot);
--		return;
--	}	
--	is = ippp_table[slot];
-+
- 	/* Daemon may send with or without address and control field comp */
- 	data = skb->data;
- 	if(!(is->pppcfg & SC_COMP_AC) && data[0] == 0xff && data[1] == 0x03) {
-@@ -2833,17 +2639,12 @@
- 	printk(KERN_DEBUG "Received CCP frame from daemon:\n");
- 	isdn_ppp_frame_log("ccp-xmit", skb->data, skb->len, 32, is->unit,lp->ppp_slot);
- 
--	if (lp->master) {
--		slot = ((isdn_net_local *) (lp->master->priv))->ppp_slot;
--		if (slot < 0 || slot > ISDN_MAX_CHANNELS) {
--			printk(KERN_ERR "%s: slot(%d) out of range\n",
--				__FUNCTION__, slot);
--			return;
--		}	
--		mis = ippp_table[slot];
--	} else
--		mis = is;
--	if (mis != is)
-+        if(lp->master)
-+                mis = ippp_table[((isdn_net_local *) (lp->master->priv))->ppp_slot];
-+        else
-+                mis = is;
-+	
-+	if(mis != is)
- 		printk(KERN_DEBUG "isdn_ppp: Ouch! Master CCP sends on slave slot!\n");
- 	
-         switch(data[2]) {
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_ppp.h linux-2.4.29/drivers/isdn/isdn_ppp.h
---- linux-2.4.29.old/drivers/isdn/isdn_ppp.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_ppp.h	2005-03-22 15:06:44.497328160 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_ppp.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_ppp.h,v 1.18 2001/09/24 13:22:42 kai Exp $
-  *
-  * header for Linux ISDN subsystem, functions for synchronous PPP (linklevel).
-  *
-@@ -19,7 +19,6 @@
- extern void isdn_ppp_cleanup(void);
- extern int isdn_ppp_free(isdn_net_local *);
- extern int isdn_ppp_bind(isdn_net_local *);
--extern int isdn_ppp_autodial_filter(struct sk_buff *, isdn_net_local *);
- extern int isdn_ppp_xmit(struct sk_buff *, struct net_device *);
- extern void isdn_ppp_receive(isdn_net_dev *, isdn_net_local *, struct sk_buff *);
- extern int isdn_ppp_dev_ioctl(struct net_device *, struct ifreq *, int);
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_tty.c linux-2.4.29/drivers/isdn/isdn_tty.c
---- linux-2.4.29.old/drivers/isdn/isdn_tty.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_tty.c	2005-03-22 15:06:44.524324056 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_tty.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_tty.c,v 1.104 2002/02/09 21:19:11 keil Exp $
-  *
-  * Linux ISDN subsystem, tty functions and AT-command emulator (linklevel).
-  *
-@@ -53,7 +53,7 @@
- static int si2bit[8] =
- {4, 1, 4, 4, 4, 4, 4, 4};
- 
--char *isdn_tty_revision = "$Revision: 1.1.4.1 $";
-+char *isdn_tty_revision = "$Revision: 1.104 $";
- 
- 
- /* isdn_tty_try_read() is called from within isdn_tty_rcv_skb()
-@@ -321,7 +321,10 @@
- 		info->send_outstanding++;
- 		info->msr &= ~UART_MSR_CTS;
- 		info->lsr &= ~UART_LSR_TEMT;
--		tty_wakeup(tty);
-+		if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-+		    tty->ldisc.write_wakeup)
-+			(tty->ldisc.write_wakeup) (tty);
-+		wake_up_interruptible(&tty->write_wait);
- 		return;
- 	}
- 	if (slen < 0) {
-@@ -1211,7 +1214,10 @@
- 						/* If DLE decoding results in zero-transmit, but
- 						 * c originally was non-zero, do a wakeup.
- 						 */
--						tty_wakeup(tty);
-+						if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-+						 tty->ldisc.write_wakeup)
-+							(tty->ldisc.write_wakeup) (tty);
-+						wake_up_interruptible(&tty->write_wait);
- 						info->msr |= UART_MSR_CTS;
- 						info->lsr |= UART_LSR_TEMT;
- 					}
-@@ -1232,6 +1238,7 @@
- 					}
- 				}
- 			} else
-+#ifdef ISDN_TTY_FCLASS1
- 			if (TTY_IS_FCLASS1(info)) {
- 				int cc = isdn_tty_handleDLEdown(info, m, c);
- 				
-@@ -1252,6 +1259,7 @@
- 				info->xmit_count += cc;
- 			} else
- #endif
-+#endif
- 				info->xmit_count += c;
- 		} else {
- 			info->msr |= UART_MSR_CTS;
-@@ -1329,7 +1337,10 @@
- 	isdn_tty_cleanup_xmit(info);
- 	info->xmit_count = 0;
- 	restore_flags(flags);
--	tty_wakeup(tty);
-+	wake_up_interruptible(&tty->write_wait);
-+	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-+	    tty->ldisc.write_wakeup)
-+		(tty->ldisc.write_wakeup) (tty);
- }
- 
- static void
-@@ -1858,7 +1869,8 @@
- 	isdn_tty_shutdown(info);
- 	if (tty->driver.flush_buffer)
- 		tty->driver.flush_buffer(tty);
--	tty_ldisc_flush(tty);
-+	if (tty->ldisc.flush_buffer)
-+		tty->ldisc.flush_buffer(tty);
- 	info->tty = 0;
- 	info->ncarrier = 0;
- 	tty->closing = 0;
-@@ -2306,6 +2318,22 @@
- 				  isdn_tty_at_cout("\r\n", info);
- 				}
- 				return 1;
-+			case ISDN_STAT_ALERT:
-+#ifdef ISDN_TTY_STAT_DEBUG
-+				printk(KERN_DEBUG "tty_STAT_ALERT ttyI%d\n", info->line);
-+#endif
-+				/* Signal RINGING to tty-device if requested */
-+				if (info->emu.mdmreg[REG_ALERT] & BIT_ALERT)
-+					isdn_tty_modem_result(RESULT_RINGING, info);
-+				return 1;
-+			case ISDN_STAT_PROCEED:
-+#ifdef ISDN_TTY_STAT_DEBUG
-+				printk(KERN_DEBUG "tty_STAT_PROCEED ttyI%d\n", info->line);
-+#endif
-+				/* Signal PROCEEDING to tty-device if requested */
-+				if (info->emu.mdmreg[REG_PROCEED] & BIT_PROCEED)
-+					isdn_tty_modem_result(RESULT_PROCEEDING, info);
-+				return 1;
- 			case ISDN_STAT_DCONN:
- #ifdef ISDN_TTY_STAT_DEBUG
- 				printk(KERN_DEBUG "tty_STAT_DCONN ttyI%d\n", info->line);
-@@ -2618,7 +2646,7 @@
- 	static char *msg[] =
- 	{"OK", "CONNECT", "RING", "NO CARRIER", "ERROR",
- 	 "CONNECT 64000", "NO DIALTONE", "BUSY", "NO ANSWER",
--	 "RINGING", "NO MSN/EAZ", "VCON", "RUNG"};
-+	 "RINGING", "NO MSN/EAZ", "VCON", "RUNG", "PROCEEDING"};
- 	ulong flags;
- 	char s[ISDN_MSNLEN+10];
- 
-@@ -2781,7 +2809,8 @@
- 			restore_flags(flags);
- 			return;
- 		}
--		tty_ldisc_flush(info->tty);
-+		if (info->tty->ldisc.flush_buffer)
-+			info->tty->ldisc.flush_buffer(info->tty);
- 		if ((info->flags & ISDN_ASYNC_CHECK_CD) &&
- 		    (!((info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
- 		       (info->flags & ISDN_ASYNC_CALLOUT_NOHUP)))) {
-@@ -3296,9 +3325,11 @@
- #ifdef CONFIG_ISDN_TTY_FAX
- 				if (TTY_IS_FCLASS2(info))
- 						sprintf(rs, "\r\n2");
-+#ifdef ISDN_TTY_FCLASS1
- 				else if (TTY_IS_FCLASS1(info))
- 						sprintf(rs, "\r\n1");
- #endif
-+#endif
- 				isdn_tty_at_cout(rs, info);
- 				break;
- 			case '=':
-@@ -3313,6 +3344,7 @@
- 						    m->mdmreg[REG_PSIZE] * 16;
- 						break;
- #ifdef CONFIG_ISDN_TTY_FAX
-+#ifdef ISDN_TTY_FCLASS1
- 					case '1':
- 						p[0]++;
- 						if (!(dev->global_features &
-@@ -3324,6 +3356,7 @@
- 						info->xmit_size =
- 						    m->mdmreg[REG_PSIZE] * 16;
- 						break;
-+#endif
- 					case '2':
- 						p[0]++;
- 						if (!(dev->global_features &
-@@ -3348,9 +3381,11 @@
- 						p[0]++;
- 						strcpy(rs, "\r\n0,");
- #ifdef CONFIG_ISDN_TTY_FAX
-+#ifdef ISDN_TTY_FCLASS1
- 						if (dev->global_features &
- 							ISDN_FEATURE_L3_FCLASS1)
- 							strcat(rs, "1,");
-+#endif
- 						if (dev->global_features &
- 							ISDN_FEATURE_L3_FCLASS2)
- 							strcat(rs, "2,");
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_tty.h linux-2.4.29/drivers/isdn/isdn_tty.h
---- linux-2.4.29.old/drivers/isdn/isdn_tty.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_tty.h	2005-03-22 15:06:44.545320864 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_tty.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_tty.h,v 1.25 2002/02/09 21:19:11 keil Exp $
-  *
-  * header for Linux ISDN subsystem, tty related functions (linklevel).
-  *
-@@ -78,6 +78,10 @@
- #define BIT_CPNFCON   2
- #define REG_CDN      23
- #define BIT_CDN       4
-+#define REG_ALERT    23
-+#define BIT_ALERT     8
-+#define REG_PROCEED  23
-+#define BIT_PROCEED  16
- 
- /* defines for result codes */
- #define RESULT_OK		0
-@@ -93,10 +97,13 @@
- #define RESULT_NO_MSN_EAZ	10
- #define RESULT_VCON		11
- #define RESULT_RUNG		12
-+#define RESULT_PROCEEDING	13
- 
-+#ifdef ISDN_TTY_FCLASS1
- #define TTY_IS_FCLASS1(info) \
- 	((info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_FAX) && \
- 	 (info->emu.mdmreg[REG_L3PROT] == ISDN_PROTO_L3_FCLASS1))
-+#endif
- #define TTY_IS_FCLASS2(info) \
- 	((info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_FAX) && \
- 	 (info->emu.mdmreg[REG_L3PROT] == ISDN_PROTO_L3_FCLASS2))
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_ttyfax.c linux-2.4.29/drivers/isdn/isdn_ttyfax.c
---- linux-2.4.29.old/drivers/isdn/isdn_ttyfax.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_ttyfax.c	2005-03-22 15:06:44.561318432 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_ttyfax.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_ttyfax.c,v 1.9 2001/09/24 13:22:43 kai Exp $
-  *
-  * Linux ISDN subsystem, tty_fax AT-command emulator (linklevel).
-  *
-@@ -20,7 +20,7 @@
- #include "isdn_ttyfax.h"
- 
- 
--static char *isdn_tty_fax_revision = "$Revision: 1.1.4.1 $";
-+static char *isdn_tty_fax_revision = "$Revision: 1.9 $";
- 
- #define PARSE_ERROR1 { isdn_tty_fax_modem_result(1, info); return 1; }
- 
-@@ -148,6 +148,7 @@
- 	}
- }
- 
-+#ifdef ISDN_TTY_FCLASS1
- int
- isdn_tty_fax_command1(modem_info * info, isdn_ctrl * c)
- {
-@@ -186,6 +187,7 @@
- 	}
- 	return (0);
- }
-+#endif
- 
- int
- isdn_tty_fax_command(modem_info * info, isdn_ctrl * c)
-@@ -193,8 +195,10 @@
- 	T30_s *f = info->fax;
- 	char rs[10];
- 
-+#ifdef ISDN_TTY_FCLASS1
- 	if (TTY_IS_FCLASS1(info))
- 		return (isdn_tty_fax_command1(info, c));
-+#endif
- 
- #ifdef ISDN_TTY_FAX_CMD_DEBUG
- 	printk(KERN_DEBUG "isdn_tty: Fax cmd %d on ttyI%d\n",
-@@ -312,6 +316,7 @@
- 	}
- }
- 
-+#ifdef ISDN_TTY_FCLASS1
- /*
-  * Parse AT+F.. FAX class 1 commands
-  */
-@@ -403,6 +408,7 @@
- 	}
- 	return 1;
- }
-+#endif
- 
- /*
-  * Parse AT+F.. FAX class 2 commands
-@@ -970,6 +976,70 @@
- 		}
- 		return 0;
- 	}
-+#if 0
-+	/* LO=n - Flow control opts */
-+	if (!strncmp(p[0], "LO", 2)) {	/* TODO */
-+		p[0] += 2;
-+		switch (*p[0]) {
-+			case '?':
-+				p[0]++;
-+				sprintf(rs, "\r\n%d", f->lo);
-+				isdn_tty_at_cout(rs, info);
-+				break;
-+			case '=':
-+				p[0]++;
-+				if (*p[0] == '?') {
-+					p[0]++;
-+					sprintf(rs, "\r\n0,1,2");
-+					isdn_tty_at_cout(rs, info);
-+				} else {
-+					par = isdn_getnum(p);
-+					if ((par < 0) || (par > 2))
-+						PARSE_ERROR1;
-+					f->lo = par;
-+#ifdef ISDN_TTY_FAX_STAT_DEBUG
-+					printk(KERN_DEBUG "isdn_tty: Fax FLO=%d\n", par);
-+#endif
-+				}
-+				break;
-+			default:
-+				PARSE_ERROR1;
-+		}
-+		return 0;
-+	}
-+#endif
-+#if 0
-+	/* LPL=n - Doc for polling cmd  */
-+	if (!strncmp(p[0], "LPL", 3)) {		/* TODO */
-+		p[0] += 3;
-+		switch (*p[0]) {
-+			case '?':
-+				p[0]++;
-+				sprintf(rs, "\r\n%d", f->lpl);
-+				isdn_tty_at_cout(rs, info);
-+				break;
-+			case '=':
-+				p[0]++;
-+				if (*p[0] == '?') {
-+					p[0]++;
-+					sprintf(rs, "\r\n0,1");
-+					isdn_tty_at_cout(rs, info);
-+				} else {
-+					par = isdn_getnum(p);
-+					if ((par < 0) || (par > 1))
-+						PARSE_ERROR1;
-+					f->lpl = par;
-+#ifdef ISDN_TTY_FAX_STAT_DEBUG
-+					printk(KERN_DEBUG "isdn_tty: Fax FLPL=%d\n", par);
-+#endif
-+				}
-+				break;
-+			default:
-+				PARSE_ERROR1;
-+		}
-+		return 0;
-+	}
-+#endif
- 
- 	/* MDL? - DCE Model       */
- 	if (!strncmp(p[0], "MDL?", 4)) {
-@@ -1049,6 +1119,38 @@
- 		}
- 		return 0;
- 	}
-+#if 0
-+	/* PTS=n - Page transfer status       */
-+	if (!strncmp(p[0], "PTS", 3)) {		/* TODO */
-+		p[0] += 3;
-+		switch (*p[0]) {
-+			case '?':
-+				p[0]++;
-+				sprintf(rs, "\r\n%d", f->pts);
-+				isdn_tty_at_cout(rs, info);
-+				break;
-+			case '=':
-+				p[0]++;
-+				if (*p[0] == '?') {
-+					p[0]++;
-+					sprintf(rs, "\r\n0-5");
-+					isdn_tty_at_cout(rs, info);
-+				} else {
-+					par = isdn_getnum(p);
-+					if ((par < 0) || (par > 5))
-+						PARSE_ERROR1;
-+					f->pts = par;
-+#ifdef ISDN_TTY_FAX_STAT_DEBUG
-+					printk(KERN_DEBUG "isdn_tty: Fax FPTS=%d\n", par);
-+#endif
-+				}
-+				break;
-+			default:
-+				PARSE_ERROR1;
-+		}
-+		return 0;
-+	}
-+#endif
- 
- 	/* REL=n - Phase C received EOL alignment */
- 	if (!strncmp(p[0], "REL", 3)) {
-@@ -1091,6 +1193,38 @@
- 		isdn_tty_at_cout(rs, info);
- 		return 0;
- 	}
-+#if 0
-+	/* SPL=n - Enable polling */
-+	if (!strncmp(p[0], "SPL", 3)) {		/* TODO */
-+		p[0] += 3;
-+		switch (*p[0]) {
-+			case '?':
-+				p[0]++;
-+				sprintf(rs, "\r\n%d", f->spl);
-+				isdn_tty_at_cout(rs, info);
-+				break;
-+			case '=':
-+				p[0]++;
-+				if (*p[0] == '?') {
-+					p[0]++;
-+					sprintf(rs, "\r\n0,1");
-+					isdn_tty_at_cout(rs, info);
-+				} else {
-+					par = isdn_getnum(p);
-+					if ((par < 0) || (par > 1))
-+						PARSE_ERROR1;
-+					f->spl = par;
-+#ifdef ISDN_TTY_FAX_STAT_DEBUG
-+					printk(KERN_DEBUG "isdn_tty: Fax FSPL=%d\n", par);
-+#endif
-+				}
-+				break;
-+			default:
-+				PARSE_ERROR1;
-+		}
-+		return 0;
-+	}
-+#endif
- 
- 	/* Phase C Transmit Data Block Size */
- 	if (!strncmp(p[0], "TBC=", 4)) {	/* dummy, not used */
-@@ -1116,7 +1250,9 @@
- {
- 	if (TTY_IS_FCLASS2(info))
- 		return (isdn_tty_cmd_FCLASS2(p, info));
-+#ifdef ISDN_TTY_FCLASS1
- 	else if (TTY_IS_FCLASS1(info))
- 		return (isdn_tty_cmd_FCLASS1(p, info));
-+#endif
- 	PARSE_ERROR1;
- }
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_ttyfax.h linux-2.4.29/drivers/isdn/isdn_ttyfax.h
---- linux-2.4.29.old/drivers/isdn/isdn_ttyfax.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_ttyfax.h	2005-03-22 15:06:44.576316152 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_ttyfax.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_ttyfax.h,v 1.3 2001/09/24 13:22:43 kai Exp $
-  *
-  * header for Linux ISDN subsystem, tty_fax related functions (linklevel).
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_v110.c linux-2.4.29/drivers/isdn/isdn_v110.c
---- linux-2.4.29.old/drivers/isdn/isdn_v110.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_v110.c	2005-03-22 15:06:44.593313568 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_v110.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_v110.c,v 1.8 2001/09/24 13:22:43 kai Exp $
-  *
-  * Linux ISDN subsystem, V.110 related functions (linklevel).
-  *
-@@ -19,7 +19,7 @@
- 
- #undef ISDN_V110_DEBUG
- 
--char *isdn_v110_revision = "$Revision: 1.1.4.1 $";
-+char *isdn_v110_revision = "$Revision: 1.8 $";
- 
- #define V110_38400 255
- #define V110_19200  15
-@@ -138,6 +138,14 @@
- 		return;
- #ifdef ISDN_V110_DEBUG
- 	printk(KERN_DEBUG "v110 close\n");
-+#if 0
-+	printk(KERN_DEBUG "isdn_v110_close: nbytes=%d\n", v->nbytes);
-+	printk(KERN_DEBUG "isdn_v110_close: nbits=%d\n", v->nbits);
-+	printk(KERN_DEBUG "isdn_v110_close: key=%d\n", v->key);
-+	printk(KERN_DEBUG "isdn_v110_close: SyncInit=%d\n", v->SyncInit);
-+	printk(KERN_DEBUG "isdn_v110:close: decodelen=%d\n", v->decodelen);
-+	printk(KERN_DEBUG "isdn_v110_close: framelen=%d\n", v->framelen);
-+#endif
- #endif
- 	kfree(v->encodebuf);
- 	kfree(v);
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_v110.h linux-2.4.29/drivers/isdn/isdn_v110.h
---- linux-2.4.29.old/drivers/isdn/isdn_v110.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_v110.h	2005-03-22 15:06:44.608311288 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_v110.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_v110.h,v 1.5 2001/09/24 13:22:43 kai Exp $
-  *
-  * Linux ISDN subsystem, V.110 related functions (linklevel).
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_x25iface.c linux-2.4.29/drivers/isdn/isdn_x25iface.c
---- linux-2.4.29.old/drivers/isdn/isdn_x25iface.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_x25iface.c	2005-03-22 15:06:44.626308552 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_x25iface.c,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_x25iface.c,v 1.10 2001/09/24 13:22:43 kai Exp $
-  *
-  * Linux ISDN subsystem, X.25 related functions
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/isdn_x25iface.h linux-2.4.29/drivers/isdn/isdn_x25iface.h
---- linux-2.4.29.old/drivers/isdn/isdn_x25iface.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdn_x25iface.h	2005-03-22 15:06:44.645305664 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_x25iface.h,v 1.1.4.1 2001/11/20 14:19:34 kai Exp $
-+/* $Id: isdn_x25iface.h,v 1.4 2001/09/24 13:22:43 kai Exp $
-  *
-  * header for Linux ISDN subsystem, x.25 related functions
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/isdnloop/isdnloop.c linux-2.4.29/drivers/isdn/isdnloop/isdnloop.c
---- linux-2.4.29.old/drivers/isdn/isdnloop/isdnloop.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdnloop/isdnloop.c	2005-03-22 15:06:48.813671976 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdnloop.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id: isdnloop.c,v 1.17 2001/08/30 10:45:42 kai Exp $
-  *
-  * ISDN low-level module implementing a dummy loop driver.
-  *
-@@ -14,7 +14,7 @@
- #include <linux/init.h>
- #include "isdnloop.h"
- 
--static char *revision = "$Revision: 1.1.4.1 $";
-+static char *revision = "$Revision$";
- static char *isdnloop_id;
- 
- MODULE_DESCRIPTION("ISDN4Linux: Pseudo Driver that simulates an ISDN card");
-@@ -22,8 +22,8 @@
- MODULE_LICENSE("GPL");
- MODULE_PARM(isdnloop_id, "s");
- MODULE_PARM_DESC(isdnloop_id, "ID-String of first card");
--
--static int isdnloop_addcard(char *);
-+  
-+  static int isdnloop_addcard(char *);
- 
- /*
-  * Free queue completely.
-@@ -1542,11 +1542,7 @@
- 	} else
- 		strcpy(rev, " ??? ");
- 	printk(KERN_NOTICE "isdnloop-ISDN-driver Rev%s\n", rev);
--
--	if (isdnloop_id)
--		return (isdnloop_addcard(isdnloop_id));
--
--	return 0;
-+	return (isdnloop_addcard(isdnloop_id));
- }
- 
- static void __exit
-diff -rNu linux-2.4.29.old/drivers/isdn/isdnloop/isdnloop.h linux-2.4.29/drivers/isdn/isdnloop/isdnloop.h
---- linux-2.4.29.old/drivers/isdn/isdnloop/isdnloop.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/isdnloop/isdnloop.h	2005-03-22 15:06:48.834668784 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdnloop.h,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Loopback lowlevel module for testing of linklevel.
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/pcbit/callbacks.c linux-2.4.29/drivers/isdn/pcbit/callbacks.c
---- linux-2.4.29.old/drivers/isdn/pcbit/callbacks.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/pcbit/callbacks.c	2005-03-22 15:06:48.909657384 +0100
-@@ -3,7 +3,7 @@
-  *
-  * Copyright (C) 1996 Universidade de Lisboa
-  * 
-- * Written by Pedro Roque Marques (pedro_m@yahoo.com)
-+ * Written by Pedro Roque Marques (roque@di.fc.ul.pt)
-  *
-  * This software may be used and distributed according to the terms of 
-  * the GNU General Public License, incorporated herein by reference.
-diff -rNu linux-2.4.29.old/drivers/isdn/pcbit/callbacks.h linux-2.4.29/drivers/isdn/pcbit/callbacks.h
---- linux-2.4.29.old/drivers/isdn/pcbit/callbacks.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/pcbit/callbacks.h	2005-03-22 15:06:48.953650696 +0100
-@@ -3,7 +3,7 @@
-  *
-  * Copyright (C) 1996 Universidade de Lisboa
-  * 
-- * Written by Pedro Roque Marques (pedro_m@yahoo.com)
-+ * Written by Pedro Roque Marques (roque@di.fc.ul.pt)
-  *
-  * This software may be used and distributed according to the terms of 
-  * the GNU General Public License, incorporated herein by reference.
-diff -rNu linux-2.4.29.old/drivers/isdn/pcbit/capi.c linux-2.4.29/drivers/isdn/pcbit/capi.c
---- linux-2.4.29.old/drivers/isdn/pcbit/capi.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/pcbit/capi.c	2005-03-22 15:06:49.042637168 +0100
-@@ -4,7 +4,7 @@
-  *
-  * Copyright (C) 1996 Universidade de Lisboa
-  * 
-- * Written by Pedro Roque Marques (pedro_m@yahoo.com)
-+ * Written by Pedro Roque Marques (roque@di.fc.ul.pt)
-  *
-  * This software may be used and distributed according to the terms of 
-  * the GNU General Public License, incorporated herein by reference.
-diff -rNu linux-2.4.29.old/drivers/isdn/pcbit/capi.h linux-2.4.29/drivers/isdn/pcbit/capi.h
---- linux-2.4.29.old/drivers/isdn/pcbit/capi.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/pcbit/capi.h	2005-03-22 15:06:49.071632760 +0100
-@@ -3,7 +3,7 @@
-  *
-  * Copyright (C) 1996 Universidade de Lisboa
-  * 
-- * Written by Pedro Roque Marques (pedro_m@yahoo.com)
-+ * Written by Pedro Roque Marques (roque@di.fc.ul.pt)
-  *
-  * This software may be used and distributed according to the terms of 
-  * the GNU General Public License, incorporated herein by reference.
-@@ -63,7 +63,8 @@
- extern int capi_decode_debug_188(u_char *hdr, ushort hdrlen);
- #endif
- 
--static inline struct pcbit_chan * 
-+extern __inline__ 
-+struct pcbit_chan * 
- capi_channel(struct pcbit_dev *dev, struct sk_buff *skb)
- {
- 	ushort callref;
-diff -rNu linux-2.4.29.old/drivers/isdn/pcbit/drv.c linux-2.4.29/drivers/isdn/pcbit/drv.c
---- linux-2.4.29.old/drivers/isdn/pcbit/drv.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/pcbit/drv.c	2005-03-22 15:06:49.091629720 +0100
-@@ -3,7 +3,7 @@
-  *
-  * Copyright (C) 1996 Universidade de Lisboa
-  * 
-- * Written by Pedro Roque Marques (pedro_m@yahoo.com)
-+ * Written by Pedro Roque Marques (roque@di.fc.ul.pt)
-  *
-  * This software may be used and distributed according to the terms of 
-  * the GNU General Public License, incorporated herein by reference.
-@@ -35,7 +35,9 @@
- #include <linux/isdnif.h>
- #include <asm/string.h>
- #include <asm/io.h>
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- #include <linux/ioport.h>
-+#endif
- 
- #include "pcbit.h"
- #include "edss1.h"
-@@ -89,6 +91,7 @@
- 
- 	if (mem_base >= 0xA0000 && mem_base <= 0xFFFFF ) {
- 		dev->ph_mem = mem_base;
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 		if (check_mem_region(dev->ph_mem, 4096)) {
- 			printk(KERN_WARNING
- 				"PCBIT: memory region %lx-%lx already in use\n",
-@@ -100,6 +103,9 @@
- 			request_mem_region(dev->ph_mem, 4096, "PCBIT mem");
- 		}
- 		dev->sh_mem = (unsigned char*)ioremap(dev->ph_mem, 4096);
-+#else
-+		dev->sh_mem = (unsigned char*) mem_base;
-+#endif
- 	}
- 	else 
- 	{
-@@ -112,8 +118,10 @@
- 	dev->b1 = kmalloc(sizeof(struct pcbit_chan), GFP_KERNEL);
- 	if (!dev->b1) {
- 		printk("pcbit_init: couldn't malloc pcbit_chan struct\n");
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 		iounmap((unsigned char*)dev->sh_mem);
- 		release_mem_region(dev->ph_mem, 4096);
-+#endif
- 		kfree(dev);
- 		return -ENOMEM;
- 	}
-@@ -122,8 +130,10 @@
- 	if (!dev->b2) {
- 		printk("pcbit_init: couldn't malloc pcbit_chan struct\n");
- 		kfree(dev->b1);
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 		iounmap((unsigned char*)dev->sh_mem);
- 		release_mem_region(dev->ph_mem, 4096);
-+#endif
- 		kfree(dev);
- 		return -ENOMEM;
- 	}
-@@ -144,8 +154,10 @@
- 	{
- 		kfree(dev->b1);
- 		kfree(dev->b2);
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 		iounmap((unsigned char*)dev->sh_mem);
- 		release_mem_region(dev->ph_mem, 4096);
-+#endif
- 		kfree(dev);
- 		dev_pcbit[board] = NULL;
- 		return -EIO;
-@@ -166,8 +178,10 @@
- 		free_irq(irq, dev);
- 		kfree(dev->b1);
- 		kfree(dev->b2);
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 		iounmap((unsigned char*)dev->sh_mem);
- 		release_mem_region(dev->ph_mem, 4096);
-+#endif
- 		kfree(dev);
- 		dev_pcbit[board] = NULL;
- 		return -EIO;
-@@ -197,8 +211,10 @@
- 		free_irq(irq, dev);
- 		kfree(dev->b1);
- 		kfree(dev->b2);
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 		iounmap((unsigned char*)dev->sh_mem);
- 		release_mem_region(dev->ph_mem, 4096);
-+#endif
- 		kfree(dev);
- 		dev_pcbit[board] = NULL;
- 		return -EIO;
-@@ -235,8 +251,10 @@
- 			del_timer(&dev->b2->fsm_timer);
- 		kfree(dev->b1);
- 		kfree(dev->b2);
-+#ifdef COMPAT_HAS_ISA_IOREMAP
- 		iounmap((unsigned char*)dev->sh_mem);
- 		release_mem_region(dev->ph_mem, 4096);
-+#endif
- 		kfree(dev);
- 	}
- }
-@@ -430,7 +448,7 @@
- 	switch(dev->l2_state) {
- 	case L2_LWMODE:
- 		/* check (size <= rdp_size); write buf into board */
--		if (len < 0 || len > BANK4 + 1)
-+		if (len > BANK4 + 1)
- 		{
- 			printk("pcbit_writecmd: invalid length %d\n", len);
- 			return -EINVAL;
-@@ -609,6 +627,20 @@
- 		       dev->b1->s_refnum, 
- 		       dev->b2->s_refnum);
- #endif
-+#if 0	
-+		if (dev->b1->s_refnum == refnum)
-+			chan = dev->b1;
-+		else { 
-+		   
-+			if (dev->b2->s_refnum == refnum)
-+				chan = dev->b2;
-+			else {
-+				chan = NULL;
-+				printk(KERN_WARNING "Connection Confirm - refnum doesn't match chan\n");
-+				break;
-+			}
-+		}
-+#else
- 		/* We just try to find a channel in the right state */
- 
- 		if (dev->b1->fsm_state == ST_CALL_INIT)
-@@ -622,6 +654,7 @@
- 				break;
- 			}
- 		}
-+#endif
- 		if (capi_decode_conn_conf(chan, skb, &complete)) {
- 			printk(KERN_DEBUG "conn_conf indicates error\n");
- 			pcbit_fsm_event(dev, chan, EV_ERROR, NULL);
-diff -rNu linux-2.4.29.old/drivers/isdn/pcbit/edss1.c linux-2.4.29/drivers/isdn/pcbit/edss1.c
---- linux-2.4.29.old/drivers/isdn/pcbit/edss1.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/pcbit/edss1.c	2005-03-22 15:06:49.119625464 +0100
-@@ -4,7 +4,7 @@
-  *
-  * Copyright (C) 1996 Universidade de Lisboa
-  * 
-- * Written by Pedro Roque Marques (pedro_m@yahoo.com)
-+ * Written by Pedro Roque Marques (roque@di.fc.ul.pt)
-  *
-  * This software may be used and distributed according to the terms of 
-  * the GNU General Public License, incorporated herein by reference.
-diff -rNu linux-2.4.29.old/drivers/isdn/pcbit/edss1.h linux-2.4.29/drivers/isdn/pcbit/edss1.h
---- linux-2.4.29.old/drivers/isdn/pcbit/edss1.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/pcbit/edss1.h	2005-03-22 15:06:49.161619080 +0100
-@@ -3,7 +3,7 @@
-  *
-  * Copyright (C) 1996 Universidade de Lisboa
-  * 
-- * Written by Pedro Roque Marques (pedro_m@yahoo.com)
-+ * Written by Pedro Roque Marques (roque@di.fc.ul.pt)
-  *
-  * This software may be used and distributed according to the terms of 
-  * the GNU General Public License, incorporated herein by reference.
-diff -rNu linux-2.4.29.old/drivers/isdn/pcbit/layer2.c linux-2.4.29/drivers/isdn/pcbit/layer2.c
---- linux-2.4.29.old/drivers/isdn/pcbit/layer2.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/pcbit/layer2.c	2005-03-22 15:06:49.195613912 +0100
-@@ -3,7 +3,7 @@
-  *
-  * Copyright (C) 1996 Universidade de Lisboa
-  *
-- * Written by Pedro Roque Marques (pedro_m@yahoo.com)
-+ * Written by Pedro Roque Marques (roque@di.fc.ul.pt)
-  *
-  * This software may be used and distributed according to the terms of
-  * the GNU General Public License, incorporated herein by reference.
-@@ -369,11 +369,16 @@
- 
- 		if (dev->read_frame) {
- 			printk(KERN_DEBUG "pcbit_receive: Type 0 frame and read_frame != NULL\n");
-+#if 0
-+			pcbit_l2_error(dev);
-+			return;
-+#else
- 			/* discard previous queued frame */
- 			if (dev->read_frame->skb)
- 				kfree_skb(dev->read_frame->skb);
- 			kfree(dev->read_frame);
- 			dev->read_frame = NULL;
-+#endif
- 		}
- 		frame = kmalloc(sizeof(struct frame_buf), GFP_ATOMIC);
- 
-@@ -449,10 +454,14 @@
- 
- 		if (!(frame = dev->read_frame)) {
- 			printk("Type 1 frame and no frame queued\n");
-+#if 1
- 			/* usually after an error: toss frame */
- 			dev->readptr += tt;
- 			if (dev->readptr > dev->sh_mem + BANK2 + BANKLEN)
- 				dev->readptr -= BANKLEN;
-+#else
-+			pcbit_l2_error(dev);
-+#endif
- 			return;
- 
- 		}
-diff -rNu linux-2.4.29.old/drivers/isdn/pcbit/layer2.h linux-2.4.29/drivers/isdn/pcbit/layer2.h
---- linux-2.4.29.old/drivers/isdn/pcbit/layer2.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/pcbit/layer2.h	2005-03-22 15:06:49.228608896 +0100
-@@ -3,7 +3,7 @@
-  *
-  * Copyright (C) 1996 Universidade de Lisboa
-  * 
-- * Written by Pedro Roque Marques (pedro_m@yahoo.com)
-+ * Written by Pedro Roque Marques (roque@di.fc.ul.pt)
-  *
-  * This software may be used and distributed according to the terms of 
-  * the GNU General Public License, incorporated herein by reference.
-diff -rNu linux-2.4.29.old/drivers/isdn/pcbit/module.c linux-2.4.29/drivers/isdn/pcbit/module.c
---- linux-2.4.29.old/drivers/isdn/pcbit/module.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/pcbit/module.c	2005-03-22 15:06:49.251605400 +0100
-@@ -3,7 +3,7 @@
-  *
-  * Copyright (C) 1996 Universidade de Lisboa
-  * 
-- * Written by Pedro Roque Marques (pedro_m@yahoo.com)
-+ * Written by Pedro Roque Marques (roque@di.fc.ul.pt)
-  *
-  * This software may be used and distributed according to the terms of 
-  * the GNU General Public License, incorporated herein by reference.
-@@ -92,6 +92,7 @@
- }
- 
- #ifndef MODULE
-+#ifdef COMPAT_HAS_NEW_SETUP
- #define MAX_PARA	(MAX_PCBIT_CARDS * 2)
- static int __init pcbit_setup(char *line)
- {
-@@ -100,6 +101,11 @@
- 	int ints[MAX_PARA+1];
- 
- 	str = get_options(line, MAX_PARA, ints);
-+#else
-+void pcbit_setup(char *str, int *ints)
-+{
-+	int i, j, argc;
-+#endif
- 	argc = ints[0];
- 	i = 0;
- 	j = 1;
-@@ -118,9 +124,13 @@
- 
- 		i++;
- 	}
-+#ifdef COMPAT_HAS_NEW_SETUP
- 	return(1);
- }
- __setup("pcbit=", pcbit_setup);
-+#else
-+}
-+#endif
- #endif
- 
- module_init(pcbit_init);
-diff -rNu linux-2.4.29.old/drivers/isdn/pcbit/pcbit.h linux-2.4.29/drivers/isdn/pcbit/pcbit.h
---- linux-2.4.29.old/drivers/isdn/pcbit/pcbit.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/pcbit/pcbit.h	2005-03-22 15:06:49.284600384 +0100
-@@ -3,7 +3,7 @@
-  *
-  * Copyright (C) 1996 Universidade de Lisboa
-  * 
-- * Written by Pedro Roque Marques (pedro_m@yahoo.com)
-+ * Written by Pedro Roque Marques (roque@di.fc.ul.pt)
-  *
-  * This software may be used and distributed according to the terms of 
-  * the GNU General Public License, incorporated herein by reference.
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/card.h linux-2.4.29/drivers/isdn/sc/card.h
---- linux-2.4.29.old/drivers/isdn/sc/card.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/card.h	2005-03-22 15:06:49.333592936 +0100
-@@ -1,4 +1,4 @@
--/* $Id: card.h,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Driver parameters for SpellCaster ISA ISDN adapters
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/command.c linux-2.4.29/drivers/isdn/sc/command.c
---- linux-2.4.29.old/drivers/isdn/sc/command.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/command.c	2005-03-22 15:06:49.348590656 +0100
-@@ -1,4 +1,4 @@
--/* $Id: command.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Copyright (C) 1996  SpellCaster Telecommunications Inc.
-  *
-@@ -95,7 +95,7 @@
- 		if(adapter[i]->driverId == driver)
- 			return i;
- 	}
--	return -ENODEV;
-+	return -NODEV;
- }
- 
- /* 
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/debug.c linux-2.4.29/drivers/isdn/sc/debug.c
---- linux-2.4.29.old/drivers/isdn/sc/debug.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/debug.c	2005-03-22 15:06:49.363588376 +0100
-@@ -1,4 +1,4 @@
--/* $Id: debug.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Copyright (C) 1996  SpellCaster Telecommunications Inc.
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/debug.h linux-2.4.29/drivers/isdn/sc/debug.h
---- linux-2.4.29.old/drivers/isdn/sc/debug.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/debug.h	2005-03-22 15:06:49.378586096 +0100
-@@ -1,4 +1,4 @@
--/* $Id: debug.h,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Copyright (C) 1996  SpellCaster Telecommunications Inc.
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/event.c linux-2.4.29/drivers/isdn/sc/event.c
---- linux-2.4.29.old/drivers/isdn/sc/event.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/event.c	2005-03-22 15:06:49.394583664 +0100
-@@ -1,4 +1,4 @@
--/* $Id: event.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Copyright (C) 1996  SpellCaster Telecommunications Inc.
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/init.c linux-2.4.29/drivers/isdn/sc/init.c
---- linux-2.4.29.old/drivers/isdn/sc/init.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/init.c	2005-03-22 15:06:49.432577888 +0100
-@@ -514,6 +514,15 @@
- 	schedule_timeout(HZ);
- 	sig = readl(rambase + SIG_OFFSET);
- 	pr_debug("Looking for a signature, got 0x%x\n", sig);
-+#if 0
-+/*
-+ * For Gary: 
-+ * If it's a timing problem, it should be gone with the above schedule()
-+ * Another possible reason may be the missing volatile in the original
-+ * code. readl() does this for us.
-+ */
-+	printk("");	/* Hack! Doesn't work without this !!!??? */
-+#endif
- 	if(sig == SIGNATURE)
- 		return PRI_BOARD;
- 
-@@ -525,6 +534,9 @@
- 	schedule_timeout(HZ);
- 	sig = readl(rambase + SIG_OFFSET);
- 	pr_debug("Looking for a signature, got 0x%x\n", sig);
-+#if 0
-+	printk("");	/* Hack! Doesn't work without this !!!??? */
-+#endif
- 	if(sig == SIGNATURE)
- 		return BRI_BOARD;
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/interrupt.c linux-2.4.29/drivers/isdn/sc/interrupt.c
---- linux-2.4.29.old/drivers/isdn/sc/interrupt.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/interrupt.c	2005-03-22 15:06:49.447575608 +0100
-@@ -1,4 +1,4 @@
--/* $Id: interrupt.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Copyright (C) 1996  SpellCaster Telecommunications Inc.
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/ioctl.c linux-2.4.29/drivers/isdn/sc/ioctl.c
---- linux-2.4.29.old/drivers/isdn/sc/ioctl.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/ioctl.c	2005-03-22 15:06:49.463573176 +0100
-@@ -23,6 +23,9 @@
- 
- extern board *adapter[];
- 
-+#if 0
-+static char *ChannelStates[] = { "Idle", "Ready", "Connecting", "Connected", "Disconnecting" };
-+#endif
- 
- int GetStatus(int card, boardInfo *);
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/message.c linux-2.4.29/drivers/isdn/sc/message.c
---- linux-2.4.29.old/drivers/isdn/sc/message.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/message.c	2005-03-22 15:06:49.478570896 +0100
-@@ -1,4 +1,4 @@
--/* $Id: message.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * functions for sending and receiving control messages
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/message.h linux-2.4.29/drivers/isdn/sc/message.h
---- linux-2.4.29.old/drivers/isdn/sc/message.h	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/message.h	2005-03-22 15:06:49.495568312 +0100
-@@ -1,4 +1,4 @@
--/* $Id: message.h,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Copyright (C) 1996  SpellCaster Telecommunications Inc.
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/packet.c linux-2.4.29/drivers/isdn/sc/packet.c
---- linux-2.4.29.old/drivers/isdn/sc/packet.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/packet.c	2005-03-22 15:06:49.514565424 +0100
-@@ -1,4 +1,4 @@
--/* $Id: packet.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Copyright (C) 1996  SpellCaster Telecommunications Inc.
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/shmem.c linux-2.4.29/drivers/isdn/sc/shmem.c
---- linux-2.4.29.old/drivers/isdn/sc/shmem.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/shmem.c	2005-03-22 15:06:49.560558432 +0100
-@@ -1,4 +1,4 @@
--/* $Id: shmem.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Copyright (C) 1996  SpellCaster Telecommunications Inc.
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/sc/timer.c linux-2.4.29/drivers/isdn/sc/timer.c
---- linux-2.4.29.old/drivers/isdn/sc/timer.c	2005-03-22 14:47:56.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/sc/timer.c	2005-03-22 15:06:49.575556152 +0100
-@@ -1,4 +1,4 @@
--/* $Id: timer.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Copyright (C) 1996  SpellCaster Telecommunications Inc.
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/tpam/tpam.h linux-2.4.29/drivers/isdn/tpam/tpam.h
---- linux-2.4.29.old/drivers/isdn/tpam/tpam.h	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/tpam/tpam.h	2005-03-22 15:06:49.648545056 +0100
-@@ -1,4 +1,4 @@
--/* $Id: tpam.h,v 1.1.2.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id: tpam.h,v 1.3 2001/09/24 13:23:12 kai Exp $
-  *
-  * Turbo PAM ISDN driver for Linux. (Kernel Driver)
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/tpam/tpam_commands.c linux-2.4.29/drivers/isdn/tpam/tpam_commands.c
---- linux-2.4.29.old/drivers/isdn/tpam/tpam_commands.c	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/tpam/tpam_commands.c	2005-03-22 15:06:49.664542624 +0100
-@@ -1,4 +1,4 @@
--/* $Id: tpam_commands.c,v 1.1.2.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id: tpam_commands.c,v 1.3 2001/09/24 13:23:12 kai Exp $
-  *
-  * Turbo PAM ISDN driver for Linux. (Kernel Driver - ISDN commands)
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/tpam/tpam_crcpc.c linux-2.4.29/drivers/isdn/tpam/tpam_crcpc.c
---- linux-2.4.29.old/drivers/isdn/tpam/tpam_crcpc.c	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/tpam/tpam_crcpc.c	2005-03-22 15:06:49.681540040 +0100
-@@ -1,4 +1,4 @@
--/* $Id: tpam_crcpc.c,v 1.1.2.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Turbo PAM ISDN driver for Linux. (Kernel Driver - CRC encoding)
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/tpam/tpam_hdlc.c linux-2.4.29/drivers/isdn/tpam/tpam_hdlc.c
---- linux-2.4.29.old/drivers/isdn/tpam/tpam_hdlc.c	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/tpam/tpam_hdlc.c	2005-03-22 15:06:49.702536848 +0100
-@@ -1,4 +1,4 @@
--/* $Id: tpam_hdlc.c,v 1.1.2.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id: tpam_hdlc.c,v 1.3 2001/09/24 13:23:12 kai Exp $
-  *
-  * Turbo PAM ISDN driver for Linux. (Kernel Driver - HDLC encoding)
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/tpam/tpam_main.c linux-2.4.29/drivers/isdn/tpam/tpam_main.c
---- linux-2.4.29.old/drivers/isdn/tpam/tpam_main.c	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/tpam/tpam_main.c	2005-03-22 15:06:49.717534568 +0100
-@@ -1,4 +1,4 @@
--/* $Id: tpam_main.c,v 1.1.2.2 2001/12/09 18:45:14 kai Exp $
-+/* $Id$
-  *
-  * Turbo PAM ISDN driver for Linux. (Kernel Driver - main routines)
-  *
-@@ -254,7 +254,7 @@
- 	name:		"tpam",
- 	id_table:	tpam_pci_tbl,
- 	probe:		tpam_probe,
--	remove:		__devexit_p(tpam_remove),
-+	remove:		tpam_remove,
- };
- 
- static int __init tpam_init(void) {
-diff -rNu linux-2.4.29.old/drivers/isdn/tpam/tpam_memory.c linux-2.4.29/drivers/isdn/tpam/tpam_memory.c
---- linux-2.4.29.old/drivers/isdn/tpam/tpam_memory.c	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/tpam/tpam_memory.c	2005-03-22 15:06:49.734531984 +0100
-@@ -1,4 +1,4 @@
--/* $Id: tpam_memory.c,v 1.1.2.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Turbo PAM ISDN driver for Linux. (Kernel Driver - Board Memory Access)
-  *
-diff -rNu linux-2.4.29.old/drivers/isdn/tpam/tpam_nco.c linux-2.4.29/drivers/isdn/tpam/tpam_nco.c
---- linux-2.4.29.old/drivers/isdn/tpam/tpam_nco.c	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/tpam/tpam_nco.c	2005-03-22 15:06:49.749529704 +0100
-@@ -1,4 +1,4 @@
--/* $Id: tpam_nco.c,v 1.1.2.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Turbo PAM ISDN driver for Linux. 
-  * (Kernel Driver - Low Level NCO Manipulation)
-diff -rNu linux-2.4.29.old/drivers/isdn/tpam/tpam_queues.c linux-2.4.29/drivers/isdn/tpam/tpam_queues.c
---- linux-2.4.29.old/drivers/isdn/tpam/tpam_queues.c	2005-03-22 14:47:57.000000000 +0100
-+++ linux-2.4.29/drivers/isdn/tpam/tpam_queues.c	2005-03-22 15:06:49.764527424 +0100
-@@ -1,4 +1,4 @@
--/* $Id: tpam_queues.c,v 1.1.2.1 2001/11/20 14:19:37 kai Exp $
-+/* $Id$
-  *
-  * Turbo PAM ISDN driver for Linux. (Kernel Driver)
-  *
-@@ -146,7 +146,6 @@
- 		do {
- 			hpic = readl(card->bar0 + TPAM_HPIC_REGISTER);
- 			if (waiting_too_long++ > 0xfffffff) {
--				kfree_skb(skb); 
- 				spin_unlock(&card->lock);
- 				printk(KERN_ERR "TurboPAM(tpam_irq): "
- 						"waiting too long...\n");
-diff -rNu linux-2.4.29.old/include/linux/b1lli.h linux-2.4.29/include/linux/b1lli.h
---- linux-2.4.29.old/include/linux/b1lli.h	2005-03-22 14:47:32.000000000 +0100
-+++ linux-2.4.29/include/linux/b1lli.h	2005-03-22 15:06:49.881509640 +0100
-@@ -1,4 +1,4 @@
--/* $Id: b1lli.h,v 1.8.8.3 2001/09/23 22:25:05 kai Exp $
-+/* $Id$
-  *
-  * ISDN lowlevel-module for AVM B1-card.
-  *
-diff -rNu linux-2.4.29.old/include/linux/b1pcmcia.h linux-2.4.29/include/linux/b1pcmcia.h
---- linux-2.4.29.old/include/linux/b1pcmcia.h	2005-03-22 14:47:32.000000000 +0100
-+++ linux-2.4.29/include/linux/b1pcmcia.h	2005-03-22 15:06:49.862512528 +0100
-@@ -1,4 +1,4 @@
--/* $Id: b1pcmcia.h,v 1.1.8.2 2001/09/23 22:25:05 kai Exp $
-+/* $Id$
-  *
-  * Exported functions of module b1pcmcia to be called by
-  * avm_cs card services module.
-diff -rNu linux-2.4.29.old/include/linux/capi.h linux-2.4.29/include/linux/capi.h
---- linux-2.4.29.old/include/linux/capi.h	2005-03-22 14:47:32.000000000 +0100
-+++ linux-2.4.29/include/linux/capi.h	2005-03-22 15:06:49.922503408 +0100
-@@ -1,4 +1,4 @@
--/* $Id: capi.h,v 1.1.4.1 2001/11/20 14:19:38 kai Exp $
-+/* $Id$
-  * 
-  * CAPI 2.0 Interface for Linux
-  * 
-diff -rNu linux-2.4.29.old/include/linux/concap.h linux-2.4.29/include/linux/concap.h
---- linux-2.4.29.old/include/linux/concap.h	2005-03-22 14:47:32.000000000 +0100
-+++ linux-2.4.29/include/linux/concap.h	2005-03-22 15:06:49.906505840 +0100
-@@ -1,4 +1,4 @@
--/* $Id: concap.h,v 1.2.8.1 2001/09/23 22:25:05 kai Exp $
-+/* $Id: concap.h,v 1.3 2001/09/24 13:23:13 kai Exp $
-  *
-  * Copyright 1997 by Henner Eisen <eis@baty.hanse.de>
-  *
-@@ -11,6 +11,7 @@
- #ifdef __KERNEL__
- #include <linux/skbuff.h>
- #include <linux/netdevice.h>
-+#include <linux/isdn_compat.h>
- 
- /* Stuff to support encapsulation protocols genericly. The encapsulation
-    protocol is processed at the uppermost layer of the network interface.
-diff -rNu linux-2.4.29.old/include/linux/hysdn_if.h linux-2.4.29/include/linux/hysdn_if.h
---- linux-2.4.29.old/include/linux/hysdn_if.h	2005-03-22 14:47:32.000000000 +0100
-+++ linux-2.4.29/include/linux/hysdn_if.h	2005-03-22 15:06:49.974495504 +0100
-@@ -1,4 +1,4 @@
--/* $Id: hysdn_if.h,v 1.1.8.3 2001/09/23 22:25:05 kai Exp $
-+/* $Id$
-  *
-  * Linux driver for HYSDN cards
-  * ioctl definitions shared by hynetmgr and driver.
-diff -rNu linux-2.4.29.old/include/linux/isdn/tpam.h linux-2.4.29/include/linux/isdn/tpam.h
---- linux-2.4.29.old/include/linux/isdn/tpam.h	2005-03-22 14:47:32.000000000 +0100
-+++ linux-2.4.29/include/linux/isdn/tpam.h	2005-03-22 15:06:49.947499608 +0100
-@@ -1,4 +1,4 @@
--/* $Id: tpam.h,v 1.1.2.1 2001/11/20 14:19:38 kai Exp $
-+/* $Id$
-  *
-  * Turbo PAM ISDN driver for Linux. (Kernel Driver)
-  *
-diff -rNu linux-2.4.29.old/include/linux/isdn.h linux-2.4.29/include/linux/isdn.h
---- linux-2.4.29.old/include/linux/isdn.h	2005-03-22 14:47:31.000000000 +0100
-+++ linux-2.4.29/include/linux/isdn.h	2005-03-22 15:06:50.001491400 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn.h,v 1.1.4.1 2001/11/20 14:19:38 kai Exp $
-+/* $Id: isdn.h,v 1.125 2001/12/01 23:18:21 detabc Exp $
-  *
-  * Main header for the Linux ISDN subsystem (linklevel).
-  *
-@@ -14,6 +14,7 @@
- #ifndef __ISDN_H__
- #define __ISDN_H__
- 
-+#include <linux/isdn_compat.h>
- #include <linux/ioctl.h>
- 
- #ifdef CONFIG_COBALT_MICRO_SERVER
-@@ -93,9 +94,15 @@
- #define ISDN_LMSNLEN         255 /* Length of tty's Listen-MSN string */
- #define ISDN_CMSGLEN	     50	 /* Length of CONNECT-Message to add for Modem */
- 
-+#ifdef BIG_PHONE_NUMBERS
- #define ISDN_MSNLEN          32
- #define NET_DV 0x06  /* Data version for isdn_net_ioctl_cfg   */
- #define TTY_DV 0x06  /* Data version for iprofd etc.          */
-+#else
-+#define ISDN_MSNLEN          20
-+#define NET_DV 0x05  /* Data version for isdn_net_ioctl_cfg   */
-+#define TTY_DV 0x05  /* Data version for iprofd etc.          */
-+#endif
- 
- #define INF_DV 0x01  /* Data version for /dev/isdninfo        */
- 
-@@ -187,6 +194,61 @@
- #define ISDN_MINOR_PPPMAX   (128 + (ISDN_MAX_CHANNELS-1))
- #define ISDN_MINOR_STATUS   255
- 
-+#ifndef CONFIG_ISDN_WITH_ABC
-+#undef CONFIG_ISDN_WITH_ABC_CALLB
-+#undef CONFIG_ISDN_WITH_ABC_UDP_CHECK
-+#undef CONFIG_ISDN_WITH_ABC_UDP_CHECK_HANGUP
-+#undef CONFIG_ISDN_WITH_ABC_UDP_CHECK_DIAL
-+#undef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+#undef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+#undef CONFIG_ISDN_WITH_ABC_RCV_NO_HUPTIMER
-+#undef CONFIG_ISDN_WITH_ABC_CH_EXTINUSE
-+#undef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+#undef CONFIG_ISDN_WITH_ABC_RAWIPCOMPRESS
-+#else /* CONFIG_ISDN_WITH_ABC */
-+#include <linux/isdn_dwabc.h>
-+
-+
-+typedef struct DWABCJIFFIES {
-+
-+	u_long	msec_1000;
-+	u_long  msec_500;
-+	u_long	msec_400;
-+	u_long	msec_200;
-+	u_long	msec_100;
-+
-+} DWABCJIFFIES;
-+
-+
-+#ifdef CONFIG_ISDN_WITH_ABC_NEED_DWSJIFFIES
-+DWABCJIFFIES isdn_dwabc_jiffies;
-+#else
-+extern DWABCJIFFIES isdn_dwabc_jiffies;
-+#endif
-+#define dwsjiffies (isdn_dwabc_jiffies.msec_1000)
-+
-+#define ISDN_DW_ABC_FLAG_UNUSED00001		0x00000001L
-+#define ISDN_DW_ABC_FLAG_NO_UDP_CHECK		0x00000002L
-+#define ISDN_DW_ABC_FLAG_NO_UDP_HANGUP		0x00000004L
-+#define ISDN_DW_ABC_FLAG_NO_UDP_DIAL		0x00000008L
-+#define ISDN_DW_ABC_FLAG_UNUSED00010		0x00000010L
-+#define ISDN_DW_ABC_FLAG_RCV_NO_HUPTIMER	0x00000020L
-+#define ISDN_DW_ABC_FLAG_NO_CH_EXTINUSE		0x00000040L
-+#define ISDN_DW_ABC_FLAG_NO_CONN_ERROR		0x00000080L
-+#define ISDN_DW_ABC_FLAG_BSD_COMPRESS		0x00000100L
-+#define ISDN_DW_ABC_FLAG_NO_LCR				0x00000200L
-+#define ISDN_DW_ABC_FLAG_LEASED_LINE		0x00001000L
-+
-+#define ISDN_DW_ABC_IFFLAG_NODCHAN			0x00000001L
-+#define ISDN_DW_ABC_IFFLAG_BSDAKTIV			0x00000002L
-+
-+#define ISDN_DW_ABC_BITLOCK_SEND			0
-+#define ISDN_DW_ABC_BITLOCK_RECEIVE			1
-+
-+#endif /* CONFIG_ISDN_WITH_ABC */
-+
-+
-+
- #ifdef CONFIG_ISDN_PPP
- 
- #ifdef CONFIG_ISDN_PPP_VJ
-@@ -204,9 +266,11 @@
- #  include <linux/concap.h>
- #endif
- 
-+#ifdef HAVE_DEVFS_FS
- #ifdef CONFIG_DEVFS_FS
- #  include <linux/devfs_fs_kernel.h>
- #endif
-+#endif /* HAVE_DEVFS_FS */
- 
- #include <linux/isdnif.h>
- 
-@@ -272,6 +336,12 @@
- #define ISDN_NET_CALLBACK   0x04       /* activate callback                 */
- #define ISDN_NET_CBHUP      0x08       /* hangup before callback            */
- #define ISDN_NET_CBOUT      0x10       /* remote machine does callback      */
-+#if 0
-+/* Unused??? */
-+#define ISDN_NET_CLONE      0x08       /* clone a tmp interface when called */
-+#define ISDN_NET_TMP        0x10       /* tmp interface until getting an IP */
-+#define ISDN_NET_DYNAMIC    0x20       /* this link is dynamically allocated */
-+#endif
- 
- #define ISDN_NET_MAGIC      0x49344C02 /* for paranoia-checking             */
- 
-@@ -386,6 +456,38 @@
-   char cisco_debserint;			/* debugging flag of cisco hdlc with slarp */
-   struct timer_list cisco_timer;
-   struct tq_struct tqueue;
-+#ifdef CONFIG_ISDN_WITH_ABC
-+  ulong 	dw_abc_flags;
-+  ulong 	dw_abc_if_flags;
-+  int   	dw_abc_inuse_secure;
-+  ulong 	dw_abc_dialstart;
-+  int   	dw_abc_old_onhtime;
-+  int 		dw_abc_remote_version;
-+  int		dw_abc_bitlocks;
-+#ifdef CONFIG_ISDN_WITH_ABC_OUTGOING_EAZ
-+  char	dw_out_msn[ISDN_MSNLEN]; /* eaz for outgoing call if *out_msn != 0 */
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+  ulong 				dw_abc_lcr_callid;
-+  ulong 				dw_abc_lcr_start_request;
-+  ulong 				dw_abc_lcr_end_request;
-+  isdn_ctrl 			*dw_abc_lcr_cmd;
-+  struct ISDN_DWABC_LCR_IOCTL	*dw_abc_lcr_io;
-+#endif
-+  ulong dw_abc_bchan_last_connect;
-+#ifdef CONFIG_ISDN_WITH_ABC_CONN_ERROR
-+  short dw_abc_bchan_errcnt;
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_RAWIPCOMPRESS
-+  void *dw_abc_bsd_compressor;
-+  void *dw_abc_bsd_stat_rx;
-+  void *dw_abc_bsd_stat_tx;
-+#endif
-+  ulong	dw_abc_bsd_snd;
-+  ulong	dw_abc_bsd_bsd_snd;
-+  ulong	dw_abc_bsd_rcv;
-+  ulong	dw_abc_bsd_bsd_rcv;
-+#endif
- } isdn_net_local;
- 
- /* the interface itself */
-@@ -608,12 +710,13 @@
- 	int               tflags;                    /* Timer-Flags:               */
- 	/*  see ISDN_TIMER_..defines  */
- 	int               global_flags;
--	infostruct        *infochain;                /* List of open info-devs.    */
--	wait_queue_head_t info_waitq;               /* Wait-Queue for isdninfo    */
- 	struct timer_list timer;		       /* Misc.-function Timer       */
- 	int               chanmap[ISDN_MAX_CHANNELS];/* Map minor->device-channel  */
- 	int               drvmap[ISDN_MAX_CHANNELS]; /* Map minor->driver-index    */
- 	int               usage[ISDN_MAX_CHANNELS];  /* Used by tty/ip/voice       */
-+#ifdef CONFIG_ISDN_WITH_ABC_CH_EXTINUSE
-+	ulong			  dwabc_chan_external_inuse[ISDN_MAX_CHANNELS];
-+#endif
- 	char              num[ISDN_MAX_CHANNELS][ISDN_MSNLEN];
- 	/* Remote number of active ch.*/
- 	int               m_idx[ISDN_MAX_CHANNELS];  /* Index for mdm....          */
-@@ -631,6 +734,7 @@
- 	isdn_v110_stream  *v110[ISDN_MAX_CHANNELS];  /* V.110 private data         */
- 	struct semaphore  sem;                       /* serialize list access*/
- 	unsigned long     global_features;
-+#ifdef HAVE_DEVFS_FS
- #ifdef CONFIG_DEVFS_FS
- 	devfs_handle_t devfs_handle_isdninfo;
- 	devfs_handle_t devfs_handle_isdnctrl;
-@@ -640,10 +744,41 @@
- 	devfs_handle_t devfs_handle_ipppX[ISDN_MAX_CHANNELS];
- #endif
- #endif /* CONFIG_DEVFS_FS */
-+#endif /* HAVE_DEVFS_FS */
- } isdn_dev;
- 
- extern isdn_dev *dev;
- 
-+#ifdef CONFIG_ISDN_WITH_ABC
-+extern int isdn_auto_dial_helper(isdn_net_local *,struct sk_buff *,int);
-+extern void dwisdn_nfw_send(isdn_net_local *lp,int drop_only);
-+extern void isdn_net_unreachable(struct net_device *,struct sk_buff *,char *);
-+extern void isdn_net_log_skb_dwabc(struct sk_buff *,isdn_net_local *,char *);
-+extern void isdn_net_hangup(struct net_device *d);
-+extern void isdn_dw_clear_if(ulong pm,isdn_net_local *);
-+extern void isdn_dwabc_test_phone(isdn_net_local *);
-+extern void isdn_dw_abc_init_func(void);
-+extern void isdn_dw_abc_release_func(void);
-+extern int isdn_dw_abc_reset_interface(isdn_net_local *,int);
-+extern int dwabc_bsd_init(isdn_net_local *lp);
-+extern void dwabc_bsd_free(isdn_net_local *lp);
-+extern struct sk_buff *dwabc_bsd_compress(isdn_net_local *,struct sk_buff *,struct net_device *);
-+extern void dwabc_bsd_first_gen(isdn_net_local *);
-+extern struct sk_buff *dwabc_bsd_rx_pkt(isdn_net_local *,struct sk_buff *,struct net_device *);
-+#ifdef CONFIG_ISDN_WITH_ABC_LCR_SUPPORT
-+extern size_t isdn_dw_abc_lcr_readstat(char *,size_t);
-+extern ulong isdn_dw_abc_lcr_call_number(isdn_net_local *,isdn_ctrl *);
-+extern void isdn_dw_abc_lcr_open(void);
-+extern void isdn_dw_abc_lcr_close(void);
-+extern int isdn_dw_abc_lcr_ioctl(ulong);
-+extern void isdn_dw_abc_lcr_clear(isdn_net_local *);
-+extern int isdn_dw_abc_lcr_lock(void);
-+extern void isdn_dw_abc_lcr_ulock(void);
-+#endif
-+#ifdef CONFIG_ISDN_WITH_ABC_UDP_CHECK
-+extern int dw_abc_udp_test(struct sk_buff *skb,struct net_device *ndev); 
-+#endif
-+#endif
- 
- #endif /* __KERNEL__ */
- 
-diff -rNu linux-2.4.29.old/include/linux/isdn_compat.h linux-2.4.29/include/linux/isdn_compat.h
---- linux-2.4.29.old/include/linux/isdn_compat.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/include/linux/isdn_compat.h	2005-03-22 15:06:50.017488968 +0100
-@@ -0,0 +1,261 @@
-+/* $Id: isdn_compat.h,v 1.53 2001/09/24 13:23:13 kai Exp $
-+ *
-+ * Linux ISDN subsystem
-+ * Compatibility for various Linux kernel versions
-+ *
-+ * This software may be used and distributed according to the terms
-+ * of the GNU General Public License, incorporated herein by reference.
-+ *
-+ */
-+
-+#ifndef _LINUX_ISDN_COMPAT_H
-+#define _LINUX_ISDN_COMPAT_H
-+
-+#ifdef __KERNEL__
-+
-+#ifndef ISDN_COMPAT_NOT_GENERIC
-+/* when using std2kern -u, this part is left out and instead provided
-+   by the .ctrl files */
-+
-+#include <linux/version.h>
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)
-+
-+#define set_current_state(sta) (current->state = sta)
-+#define module_init(x)	int init_module(void) { return x(); }
-+#define module_exit(x)	void cleanup_module(void) { x(); }
-+#define BUG() do { printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); *(int *)0 = 0; } while (0)
-+#define init_MUTEX(x)				*(x)=MUTEX
-+#define init_MUTEX_LOCKED(x)			*(x)=MUTEX_LOCKED
-+#define __devinit
-+#define __devinitdata
-+
-+#else /* 2.2.18 and later */
-+
-+#define COMPAT_HAS_NEW_SETUP
-+#define COMPAT_HAS_NEW_WAITQ
-+
-+#endif
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)
-+
-+#define dev_kfree_skb_irq(a) dev_kfree_skb(a)
-+#define dev_kfree_skb_any(a) dev_kfree_skb(a)
-+#define COMPAT_HAS_2_2_PCI
-+#define get_pcibase(ps, nr) ps->base_address[nr]
-+#define pci_resource_start_io(pdev, nr) ((pdev)->base_address[nr] & PCI_BASE_ADDRESS_IO_MASK)
-+#define pci_resource_start_mem(pdev, nr) ((pdev)->base_address[nr] & PCI_BASE_ADDRESS_MEM_MASK)
-+#define pci_get_sub_vendor(pdev, id)	pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &id)
-+#define pci_get_sub_system(pdev, id)	pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &id)
-+
-+#define __exit
-+#define __devinit
-+#define __devinitdata
-+
-+#define net_device device
-+#define COMPAT_NO_SOFTNET
-+#define netif_running(d) test_bit(LINK_STATE_START, &d->state)
-+#define COMPAT_NEED_MPPP_DEFS
-+#define spin_lock_bh(lock)
-+#define spin_unlock_bh(lock)
-+#define COMPAT_NEED_SPIN_LOCK_BH
-+#define i_count_read(ic) ic
-+#define i_count_inc(ic)  ic++
-+#define COMPAT_USE_MODCOUNT_LOCK
-+#define devfs_register_chrdev(m,n,f) register_chrdev(m,n,f)
-+#define devfs_unregister_chrdev(m,n) unregister_chrdev(m,n)
-+#define COMPAT_NEED_PCI_IDS
-+#define in_irq() (local_irq_count[smp_processor_id()] != 0)
-+
-+#else /* 2.4.0 and later */
-+
-+#define pci_resource_start_io(pdev, nr) pci_resource_start(pdev, nr)
-+#define pci_resource_start_mem(pdev, nr) pci_resource_start(pdev, nr)
-+#define get_pcibase(ps, nr) ps->resource[nr].start
-+#define pci_get_sub_system(pdev, id)	id = pdev->subsystem_device
-+#define pci_get_sub_vendor(pdev, id)	id = pdev->subsystem_vendor
-+
-+#define BIG_PHONE_NUMBERS
-+#define COMPAT_HAS_ISA_IOREMAP
-+#define i_count_read(ic) atomic_read(&ic)
-+#define i_count_inc(ic)  atomic_inc(&ic)
-+#define COMPAT_HAS_FILEOP_OWNER
-+#define COMPAT_HAVE_NEW_FILLDIR
-+#define COMPAT_has_fileops_in_inode
-+#define COMPAT_HAS_init_special_inode
-+#define COMPAT_d_alloc_root_one_parameter
-+#define HAVE_DEVFS_FS
-+#define COMPAT_HAS_SCHEDULE_TASK
-+#define COMPAT_HAS_USB_IDTAB
-+
-+#endif
-+
-+#endif /* ISDN_COMPAT_GENERIC */
-+
-+#ifdef COMPAT_HAS_2_2_PCI 
-+#include <linux/pci.h>
-+#ifdef __powerpc__
-+static inline int pci_enable_device(struct pci_dev *dev)
-+{
-+	u16 cmd;
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_IO | PCI_COMMAND_SERR;
-+	cmd &= ~PCI_COMMAND_FAST_BACK;
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+	return(0);
-+}
-+#else
-+static inline int pci_enable_device(struct pci_dev *dev)
-+{
-+	return 0;
-+}
-+#endif /* __powerpc__ */
-+
-+#define PCI_ANY_ID (~0)
-+
-+/* as this is included multiple times, we make it inline */
-+
-+static inline struct pci_dev * pci_find_subsys(unsigned int vendor, unsigned int device,
-+					unsigned int ss_vendor, unsigned int ss_device,
-+					struct pci_dev *from)
-+{
-+	unsigned short subsystem_vendor, subsystem_device;
-+
-+	while ((from = pci_find_device(vendor, device, from))) {
-+		pci_read_config_word(from, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vendor);
-+		pci_read_config_word(from, PCI_SUBSYSTEM_ID, &subsystem_device);
-+		if ((ss_vendor == PCI_ANY_ID || subsystem_vendor == ss_vendor) &&
-+		    (ss_device == PCI_ANY_ID || subsystem_device == ss_device))
-+			return from;
-+	}
-+	return NULL;
-+}
-+#endif
-+
-+#ifdef COMPAT_NO_SOFTNET
-+#include <linux/netdevice.h>
-+
-+/*
-+ * Tell upper layers that the network device is ready to xmit more frames.
-+ */
-+static void __inline__ netif_wake_queue(struct net_device * dev)
-+{
-+	dev->tbusy = 0;
-+	mark_bh(NET_BH);
-+}
-+
-+/*
-+ * called during net_device open()
-+ */
-+static void __inline__ netif_start_queue(struct net_device * dev)
-+{
-+	dev->tbusy = 0;
-+	/* actually, we never use the interrupt flag at all */
-+	dev->interrupt = 0;
-+	dev->start = 1;
-+}
-+
-+/*
-+ * Ask upper layers to temporarily cease passing us more xmit frames.
-+ */
-+static void __inline__ netif_stop_queue(struct net_device * dev)
-+{
-+	dev->tbusy = 1;
-+}
-+
-+#endif /* COMPAT_NO_SOFTNET */
-+
-+#ifndef COMPAT_HAS_NEW_WAITQ
-+typedef struct wait_queue wait_queue_t;
-+typedef struct wait_queue *wait_queue_head_t;
-+
-+#define DECLARE_WAITQUEUE(wait, current)	struct wait_queue wait = { current, NULL }
-+#define DECLARE_WAIT_QUEUE_HEAD(wait)		wait_queue_head_t wait
-+#define init_waitqueue_head(x)			*(x)=NULL
-+#define init_waitqueue_entry(q,p)		((q)->task)=(p)
-+#endif /* COMPAT_HAS_NEW_WAITQ */
-+
-+#ifdef COMPAT_NEED_PCI_IDS
-+
-+#define PCI_ANY_ID (~0)
-+
-+#define PCI_VENDOR_ID_DYNALINK          0x0675
-+#define PCI_DEVICE_ID_DYNALINK_IS64PH   0x1702
-+
-+#define PCI_DEVICE_ID_WINBOND2_6692	0x6692
-+
-+#define PCI_DEVICE_ID_PLX_R685		0x1030
-+#define PCI_DEVICE_ID_PLX_DJINN_ITOO    0x1151
-+#define PCI_DEVICE_ID_PLX_R753          0x1152
-+
-+#define PCI_VENDOR_ID_ELSA		0x1048
-+#define PCI_DEVICE_ID_ELSA_MICROLINK	0x1000
-+#define PCI_DEVICE_ID_ELSA_QS3000	0x3000
-+
-+#define PCI_VENDOR_ID_EICON		0x1133
-+#define PCI_DEVICE_ID_EICON_DIVA20PRO	0xe001
-+#define PCI_DEVICE_ID_EICON_DIVA20	0xe002
-+#define PCI_DEVICE_ID_EICON_DIVA20PRO_U	0xe003
-+#define PCI_DEVICE_ID_EICON_DIVA20_U	0xe004
-+#define PCI_DEVICE_ID_EICON_DIVA201	0xe005
-+#define PCI_DEVICE_ID_EICON_MAESTRA	0xe010
-+#define PCI_DEVICE_ID_EICON_MAESTRAQ	0xe012
-+#define PCI_DEVICE_ID_EICON_MAESTRAQ_U	0xe013
-+#define PCI_DEVICE_ID_EICON_MAESTRAP	0xe014
-+ 
-+#define PCI_VENDOR_ID_CCD		0x1397
-+#define PCI_DEVICE_ID_CCD_2BD0	        0x2BD0
-+#define PCI_DEVICE_ID_CCD_B000	        0xB000
-+#define PCI_DEVICE_ID_CCD_B006	        0xB006
-+#define PCI_DEVICE_ID_CCD_B007	        0xB007
-+#define PCI_DEVICE_ID_CCD_B008	        0xB008
-+#define PCI_DEVICE_ID_CCD_B009	        0xB009
-+#define PCI_DEVICE_ID_CCD_B00A	        0xB00A
-+#define PCI_DEVICE_ID_CCD_B00B	        0xB00B
-+#define PCI_DEVICE_ID_CCD_B00C	        0xB00C
-+#define PCI_DEVICE_ID_CCD_B100	        0xB100
-+
-+#define PCI_VENDOR_ID_ASUSTEK           0x1043   
-+#define PCI_DEVICE_ID_ASUSTEK_0675      0x0675
-+
-+#define PCI_VENDOR_ID_BERKOM		        0x0871
-+#define PCI_DEVICE_ID_BERKOM_A1T	        0xFFA1
-+#define PCI_DEVICE_ID_BERKOM_T_CONCEPT          0xFFA2
-+#define PCI_DEVICE_ID_BERKOM_A4T	        0xFFA4
-+#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO      0xFFA8
-+
-+#define PCI_DEVICE_ID_SATSAGEM_NICCY	0x1016
-+
-+#define PCI_DEVICE_ID_TIGERJET_100	0x0002
-+
-+#define PCI_VENDOR_ID_ANIGMA		0x1051
-+#define PCI_DEVICE_ID_ANIGMA_MC145575	0x0100
-+
-+#define PCI_VENDOR_ID_ZOLTRIX		0x15b0
-+#define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2BD0
-+
-+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E	0x0070
-+#define PCI_DEVICE_ID_DIGI_DF_M_E	0x0071
-+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A	0x0072
-+#define PCI_DEVICE_ID_DIGI_DF_M_A	0x0073
-+
-+#define PCI_DEVICE_ID_AVM_B1		0x0700
-+#define PCI_DEVICE_ID_AVM_C4		0x0800
-+#define PCI_DEVICE_ID_AVM_C2		0x1100
-+#define PCI_DEVICE_ID_AVM_T1		0x1200
-+
-+#define PCI_VENDOR_ID_HYPERCOPE		0x1365
-+#define PCI_DEVICE_ID_HYPERCOPE_PLX	0x9050
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO     0x0104
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO         0x0106
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO        0x0107
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2       0x0108
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_PLEXUS       0x0109
-+
-+#define PCI_VENDOR_ID_ABOCOM            0x13D1
-+#define PCI_DEVICE_ID_ABOCOM_2BD1       0x2BD1
-+
-+#endif /* COMPAT_NEED_PCI_IDS */
-+
-+#endif /* __KERNEL__ */
-+#endif /* _LINUX_ISDN_COMPAT_H */
-diff -rNu linux-2.4.29.old/include/linux/isdn_divertif.h linux-2.4.29/include/linux/isdn_divertif.h
---- linux-2.4.29.old/include/linux/isdn_divertif.h	2005-03-22 14:47:32.000000000 +0100
-+++ linux-2.4.29/include/linux/isdn_divertif.h	2005-03-22 15:06:50.032486688 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_divertif.h,v 1.1.4.1 2001/11/20 14:19:38 kai Exp $
-+/* $Id$
-  *
-  * Header for the diversion supplementary interface for i4l.
-  *
-@@ -14,7 +14,7 @@
- /***********************************************************/
- /* magic value is also used to control version information */
- /***********************************************************/
--#define DIVERT_IF_MAGIC 0x25873401
-+#define DIVERT_IF_MAGIC 0x25873402
- #define DIVERT_CMD_REG  0x00  /* register command */
- #define DIVERT_CMD_REL  0x01  /* release command */
- #define DIVERT_NO_ERR   0x00  /* return value no error */
-@@ -34,6 +34,7 @@
-     int (*ll_cmd)(isdn_ctrl *); /* supplied by hl on return */
-     char * (*drv_to_name)(int); /* map a driver id to name, supplied by hl */
-     int (*name_to_drv)(char *); /* map a driver id to name, supplied by hl */
-+    int (*dial_net_name)(char *); /* force dial of a ll net interface  */
-   } isdn_divert_if;
- 
- /*********************/
-diff -rNu linux-2.4.29.old/include/linux/isdn_dwabc.h linux-2.4.29/include/linux/isdn_dwabc.h
---- linux-2.4.29.old/include/linux/isdn_dwabc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29/include/linux/isdn_dwabc.h	2005-03-22 15:06:50.048484256 +0100
-@@ -0,0 +1,84 @@
-+/* $Id: isdn_dwabc.h,v 1.9 2001/09/26 20:32:08 detabc Exp $
-+ *
-+ * Header for the Linux ISDN abc-extension.
-+ *
-+ * Copyright           by abc GmbH
-+ *                     written by Detlef Wengorz <detlefw@isdn4linux.de>
-+ * 
-+ * This software may be used and distributed according to the terms
-+ * of the GNU General Public License, incorporated herein by reference.
-+ *
-+ */
-+
-+#ifndef ISDN_DWABC_H
-+#define ISDN_DWABC_H
-+
-+#ifdef __KERNEL__
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/smp.h>
-+#include <linux/spinlock.h>
-+#include <linux/errno.h>
-+
-+
-+typedef struct ISDN_DWSPINLOCK {
-+
-+	spinlock_t 	spin;
-+	short  		owner;
-+	short		my_flags;
-+	ulong 		irq_flags;
-+
-+} ISDN_DWSPINLOCK;
-+
-+#define ISDN_DWSPIN_UNLOCKED				\
-+	(ISDN_DWSPINLOCK) {						\
-+		spin: 		SPIN_LOCK_UNLOCKED,		\
-+		owner:		-1,						\
-+		my_flags:	0,						\
-+		irq_flags:	0,						\
-+	}
-+
-+#define ISDN_DWSPIN_INIT(x)			\
-+			do { *(x) = ISDN_DWSPIN_UNLOCKED; } while(0);
-+
-+static __inline__ int isdn_dwspin_trylock(ISDN_DWSPINLOCK *spin)
-+{
-+	if(!spin_trylock(&spin->spin)) {
-+
-+		if(spin->owner == smp_processor_id())
-+			return(-EAGAIN);
-+
-+		spin_lock(&spin->spin);
-+	}
-+
-+	spin->owner = smp_processor_id();
-+	return(0);
-+}
-+
-+static __inline__ void isdn_dwspin_unlock(ISDN_DWSPINLOCK *spin)
-+{
-+	spin->owner = -1;
-+	spin_unlock(&spin->spin);
-+}
-+
-+
-+#else
-+#include <sys/types.h>
-+#endif
-+
-+#define DWABC_LCR_FLG_NEWNUMBER		0x00000001L
-+#define DWABC_LCR_FLG_DISABLE		0x00000002L
-+#define DWABC_LCR_FLG_NEWHUPTIME	0x00000004L
-+
-+
-+struct ISDN_DWABC_LCR_IOCTL {
-+
-+	int 	lcr_ioctl_sizeof;	/* mustbe sizeof(ISDN_DWABC_LCR_IOCTL)	*/
-+	u_short lcr_ioctl_onhtime;	/* new hanguptime						*/
-+	u_long 	lcr_ioctl_callid;	/* callid from lcr-subsystem			*/
-+	u_long 	lcr_ioctl_flags;	/* see above							*/
-+	char 	lcr_ioctl_nr[32];	/* new destination phonenumber			*/
-+};
-+
-+#endif
-diff -rNu linux-2.4.29.old/include/linux/isdn_lzscomp.h linux-2.4.29/include/linux/isdn_lzscomp.h
---- linux-2.4.29.old/include/linux/isdn_lzscomp.h	2005-03-22 14:47:32.000000000 +0100
-+++ linux-2.4.29/include/linux/isdn_lzscomp.h	2005-03-22 15:06:50.089478024 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdn_lzscomp.h,v 1.1.4.1 2001/11/20 14:19:38 kai Exp $
-+/* $Id$
-  *
-  * Header for isdn_lzscomp.c
-  * Concentrated here to not mess up half a dozen kernel headers with code
-diff -rNu linux-2.4.29.old/include/linux/isdn_ppp.h linux-2.4.29/include/linux/isdn_ppp.h
---- linux-2.4.29.old/include/linux/isdn_ppp.h	2005-03-22 14:47:31.000000000 +0100
-+++ linux-2.4.29/include/linux/isdn_ppp.h	2005-03-22 15:06:50.116473920 +0100
-@@ -8,6 +8,7 @@
- #ifndef _LINUX_ISDN_PPP_H
- #define _LINUX_ISDN_PPP_H
- 
-+#include <linux/isdn_compat.h>
- 
- #define CALLTYPE_INCOMING 0x1
- #define CALLTYPE_OUTGOING 0x2
-@@ -33,6 +34,11 @@
- #define PPPIOCSCOMPRESSOR _IOW('t',135,int)
- #define PPPIOCGIFNAME      _IOR('t',136, char [IFNAMSIZ] )
- 
-+#ifdef COMPAT_NEED_MPPP_DEFS
-+#define PPP_MP          0x003d
-+#define PPP_COMPFRAG    0x00fb
-+#define PPP_CCPFRAG     0x80fb
-+#endif
- 
- #define SC_MP_PROT       0x00000200
- #define SC_REJ_MP_PROT   0x00000400
-@@ -65,9 +71,6 @@
- 
- #include <linux/config.h>
- 
--#ifdef CONFIG_IPPP_FILTER
--#include <linux/filter.h>
--#endif
- 
- #define DECOMP_ERR_NOMEM	(-10)
- 
-@@ -226,10 +229,6 @@
-   unsigned char *cbuf;
-   struct slcompress *slcomp;
- #endif
--#ifdef CONFIG_IPPP_FILTER
--  struct sock_fprog pass_filter;	/* filter for packets to pass */
--  struct sock_fprog active_filter;	/* filter for pkts to reset idle */
--#endif
-   unsigned long debug;
-   struct isdn_ppp_compressor *compressor,*decompressor;
-   struct isdn_ppp_compressor *link_compressor,*link_decompressor;
-diff -rNu linux-2.4.29.old/include/linux/isdnif.h linux-2.4.29/include/linux/isdnif.h
---- linux-2.4.29.old/include/linux/isdnif.h	2005-03-22 14:47:31.000000000 +0100
-+++ linux-2.4.29/include/linux/isdnif.h	2005-03-22 15:06:50.132471488 +0100
-@@ -1,4 +1,4 @@
--/* $Id: isdnif.h,v 1.1.4.1 2001/11/20 14:19:38 kai Exp $
-+/* $Id: isdnif.h,v 1.43 2002/02/09 21:19:11 keil Exp $
-  *
-  * Linux ISDN subsystem
-  * Definition of the interface between the subsystem and its low-level drivers.
-@@ -14,6 +14,7 @@
- #ifndef __ISDNIF_H__
- #define __ISDNIF_H__
- 
-+#include <linux/isdn_compat.h>
- 
- /*
-  * Values for general protocol-selection
-@@ -213,6 +214,8 @@
- #define ISDN_STAT_FAXIND  276    /* FAX indications from HL-driver        */
- #define ISDN_STAT_AUDIO   277    /* DTMF, DSP indications                 */
- #define ISDN_STAT_DISCH   278    /* Disable/Enable channel usage          */
-+#define ISDN_STAT_ALERT   279    /* Signal alerting                       */
-+#define ISDN_STAT_PROCEED 280    /* Signal proceeding                     */
- 
- /*
-  * Audio commands
-diff -rNu linux-2.4.29.old/include/linux/kernelcapi.h linux-2.4.29/include/linux/kernelcapi.h
---- linux-2.4.29.old/include/linux/kernelcapi.h	2005-03-22 14:47:32.000000000 +0100
-+++ linux-2.4.29/include/linux/kernelcapi.h	2005-03-22 15:06:50.147469208 +0100
-@@ -1,12 +1,10 @@
--/* $Id: kernelcapi.h,v 1.1.4.2 2002/01/28 18:25:10 kai Exp $
-+/*
-+ * $Id: kernelcapi.h,v 1.9 2000/11/28 09:34:02 kai Exp $
-  * 
-  * Kernel CAPI 2.0 Interface for Linux
-  * 
-  * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
-  * 
-- * This software may be used and distributed according to the terms
-- * of the GNU General Public License, incorporated herein by reference.
-- *
-  */
- 
- #ifndef __KERNELCAPI_H__
diff --git a/openwrt/target/linux/generic-2.4/patches/201-hfc_usb_backport.patch b/openwrt/target/linux/generic-2.4/patches/201-hfc_usb_backport.patch
deleted file mode 100644
index 4ef20fa8ba..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/201-hfc_usb_backport.patch
+++ /dev/null
@@ -1,2663 +0,0 @@
-diff -rNu linux-2.4.29.old/drivers/Makefile linux-2.4.29/drivers/Makefile
---- linux-2.4.29.old/drivers/Makefile	2005-03-22 14:47:41.000000000 +0100
-+++ linux-2.4.29/drivers/Makefile	2005-03-22 15:15:20.012957872 +0100
-@@ -38,7 +38,7 @@
- subdir-$(CONFIG_MD)		+= md
- subdir-$(CONFIG_IEEE1394)	+= ieee1394
- subdir-$(CONFIG_PNP)		+= pnp
--subdir-$(CONFIG_ISDN_BOOL)	+= isdn
-+subdir-$(CONFIG_ISDN)		+= isdn
- subdir-$(CONFIG_ATM)		+= atm
- subdir-$(CONFIG_FC4)		+= fc4
- 
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfc_usb.c linux-2.4.29/drivers/isdn/hisax/hfc_usb.c
---- linux-2.4.29.old/drivers/isdn/hisax/hfc_usb.c	2005-03-22 15:13:58.233390256 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfc_usb.c	2005-03-22 15:14:57.475384104 +0100
-@@ -1,13 +1,11 @@
--/* $Id: hfc_usb.c,v 2.3 2001/07/06 21:30:11 werner Exp $
-+/*
-+ * hfc_usb.c
-  *
-+ * modular HiSax ISDN driver for Colognechip HFC-USB chip
-  *
-- *
-- * Author       (C) 2001 Werner Cornelius (werner@isdn-development.de)
-- *              modular driver for Colognechip HFC-USB chip
-- *              as plugin for HiSax isdn driver
-- *              type approval valid for HFC-S USB based TAs
-- *
-- * Copyright 2001  by Werner Cornelius (werner@isdn-development.de)
-+ * Authors : Peter Sprenger  (sprenger@moving-byters.de)
-+ *           Martin Bachem   (info@colognechip.com)
-+ *           based on the first hfc_usb driver of Werner Cornelius (werner@isdn-development.de)
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-@@ -23,70 +21,90 @@
-  * along with this program; if not, write to the Free Software
-  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-  *
-- */
-+ * 2005_Mar_16 grsch
-+ *      ported 2.6.8 hfc_usb.c to 2.4.20 format
-+ *      Gregor Schaffrath <gschaff@ran-dom.org>
-+*/
-+
- 
- #include <linux/types.h>
- #include <linux/stddef.h>
- #include <linux/timer.h>
- #include <linux/config.h>
--#include <linux/isdn_compat.h>
- #include <linux/init.h>
- #include "hisax.h"
- #include <linux/module.h>
- #include <linux/kernel_stat.h>
--#include <linux/tqueue.h>
- #include <linux/usb.h>
- #include <linux/kernel.h>
- #include <linux/smp_lock.h>
- #include <linux/sched.h>
-+#include "hisax_if.h"
- #include "hisax_loadable.h"
- 
-+static const char *hfcusb_revision = "4.0";
-+
-+/*
-+	to enable much mire debug messages in this driver, define
-+			VERBOSE_USB_DEBUG and VERBOSE_ISDN_DEBUG
-+	below
-+*/
-+
-+#define VERBOSE_USB_DEBUG 
-+#define VERBOSE_ISDN_DEBUG 
-+
- #define INCLUDE_INLINE_FUNCS
- 
-+#define TRUE  1
-+#define FALSE 0
-+
-+
- /***********/
- /* defines */
- /***********/
--#define HFC_CTRL_TIMEOUT 5	/* 5ms timeout writing/reading regs */
--#define HFC_TIMER_T3     7000	/* timeout for l1 activation timer */
--
--#define HFCUSB_L1_STATECHANGE   0	/* L1 state changed */
--#define HFCUSB_L1_DRX           1	/* D-frame received */
--#define HFCUSB_L1_ERX           2	/* E-frame received */
--#define HFCUSB_L1_DTX           4	/* D-frames completed */
--
--#define MAX_BCH_SIZE        2048	/* allowed B-channel packet size */
--
--#define HFCUSB_RX_THRESHOLD 64	/* threshold for fifo report bit rx */
--#define HFCUSB_TX_THRESHOLD 64	/* threshold for fifo report bit tx */
--
--#define HFCUSB_CHIP_ID    0x16	/* Chip ID register index */
--#define HFCUSB_CIRM       0x00	/* cirm register index */
--#define HFCUSB_USB_SIZE   0x07	/* int length register */
--#define HFCUSB_USB_SIZE_I 0x06	/* iso length register */
--#define HFCUSB_F_CROSS    0x0b	/* bit order register */
--#define HFCUSB_CLKDEL     0x37	/* bit delay register */
--#define HFCUSB_CON_HDLC   0xfa	/* channel connect register */
-+#define HFC_CTRL_TIMEOUT	20  //(HZ * USB_CTRL_GET_TIMEOUT)
-+/* 5ms timeout writing/reading regs */
-+#define HFC_TIMER_T3     8000      /* timeout for l1 activation timer */
-+#define HFC_TIMER_T4     500       /* time for state change interval */
-+
-+#define HFCUSB_L1_STATECHANGE   0  /* L1 state changed */
-+#define HFCUSB_L1_DRX           1  /* D-frame received */
-+#define HFCUSB_L1_ERX           2  /* E-frame received */
-+#define HFCUSB_L1_DTX           4  /* D-frames completed */
-+
-+#define MAX_BCH_SIZE        2048   /* allowed B-channel packet size */
-+
-+#define HFCUSB_RX_THRESHOLD 64     /* threshold for fifo report bit rx */
-+#define HFCUSB_TX_THRESHOLD 64     /* threshold for fifo report bit tx */
-+
-+#define HFCUSB_CHIP_ID    0x16     /* Chip ID register index */
-+#define HFCUSB_CIRM       0x00     /* cirm register index */
-+#define HFCUSB_USB_SIZE   0x07     /* int length register */
-+#define HFCUSB_USB_SIZE_I 0x06     /* iso length register */
-+#define HFCUSB_F_CROSS    0x0b     /* bit order register */
-+#define HFCUSB_CLKDEL     0x37     /* bit delay register */
-+#define HFCUSB_CON_HDLC   0xfa     /* channel connect register */
- #define HFCUSB_HDLC_PAR   0xfb
--#define HFCUSB_SCTRL      0x31	/* S-bus control register (tx) */
--#define HFCUSB_SCTRL_E    0x32	/* same for E and special funcs */
--#define HFCUSB_SCTRL_R    0x33	/* S-bus control register (rx) */
--#define HFCUSB_F_THRES    0x0c	/* threshold register */
--#define HFCUSB_FIFO       0x0f	/* fifo select register */
--#define HFCUSB_F_USAGE    0x1a	/* fifo usage register */
-+#define HFCUSB_SCTRL      0x31     /* S-bus control register (tx) */
-+#define HFCUSB_SCTRL_E    0x32     /* same for E and special funcs */
-+#define HFCUSB_SCTRL_R    0x33     /* S-bus control register (rx) */
-+#define HFCUSB_F_THRES    0x0c     /* threshold register */
-+#define HFCUSB_FIFO       0x0f     /* fifo select register */
-+#define HFCUSB_F_USAGE    0x1a     /* fifo usage register */
- #define HFCUSB_MST_MODE0  0x14
- #define HFCUSB_MST_MODE1  0x15
- #define HFCUSB_P_DATA     0x1f
- #define HFCUSB_INC_RES_F  0x0e
- #define HFCUSB_STATES     0x30
- 
--#define HFCUSB_CHIPID 0x40	/* ID value of HFC-USB */
-+#define HFCUSB_CHIPID 0x40         /* ID value of HFC-USB */
- 
- /******************/
- /* fifo registers */
- /******************/
--#define HFCUSB_NUM_FIFOS   8	/* maximum number of fifos */
--#define HFCUSB_B1_TX       0	/* index for B1 transmit bulk/int */
--#define HFCUSB_B1_RX       1	/* index for B1 receive bulk/int */
-+#define HFCUSB_NUM_FIFOS   8       /* maximum number of fifos */
-+#define HFCUSB_B1_TX       0       /* index for B1 transmit bulk/int */
-+#define HFCUSB_B1_RX       1       /* index for B1 receive bulk/int */
- #define HFCUSB_B2_TX       2
- #define HFCUSB_B2_RX       3
- #define HFCUSB_D_TX        4
-@@ -94,198 +112,162 @@
- #define HFCUSB_PCM_TX      6
- #define HFCUSB_PCM_RX      7
- 
--/************/
--/* LED mask */
--/************/
--#define LED_DRIVER         0x1
--#define LED_L1             0x2
--#define LED_BCH            0x4
-+/*
-+* used to switch snd_transfer_mode for different TA modes e.g. the Billion USB TA just
-+* supports ISO out, while the Cologne Chip EVAL TA just supports BULK out
-+*/
-+#define USB_INT		0
-+#define USB_BULK	1
-+#define USB_ISOC	2
-+
-+#define ISOC_PACKETS_D	8
-+#define ISOC_PACKETS_B	8
-+#define ISO_BUFFER_SIZE	128
-+
-+// ISO send definitions
-+#define SINK_MAX	68
-+#define SINK_MIN	48
-+#define SINK_DMIN	12
-+#define SINK_DMAX	18
-+#define BITLINE_INF	(-64*8)
-+
-+
-+
- 
- /**********/
- /* macros */
- /**********/
--#define Write_hfc(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_out_pipe,0,0x40,(c),(b),0,0,HFC_CTRL_TIMEOUT)
--#define Read_hfc(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_in_pipe,1,0xC0,0,(b),(c),1,HFC_CTRL_TIMEOUT)
--
--#ifdef COMPAT_HAS_USB_IDTAB
--/****************************************/
--/* data defining the devices to be used */
--/****************************************/
--static __devinitdata const struct usb_device_id hfc_usb_idtab[3] = {
--	{USB_DEVICE(0x959, 0x2bd0)},	/* Colognechip ROM */
--	{USB_DEVICE(0x7b0, 0x0006)},	/* USB TA 128 */
--	{}			/* end with an all-zeroes entry */
--};
--#endif
-+#define write_usb(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_out_pipe,0,0x40,(c),(b),NULL,0,HFC_CTRL_TIMEOUT)
-+#define read_usb(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_in_pipe,1,0xC0,0,(b),(c),1,HFC_CTRL_TIMEOUT)
- 
- /*************************************************/
- /* entry and size of output/input control buffer */
- /*************************************************/
- #define HFC_CTRL_BUFSIZE 32
--typedef struct {
-+typedef struct
-+{
- 	__u8 hfc_reg;		/* register number */
- 	__u8 reg_val;		/* value to be written (or read) */
-+	int action;         /* data for action handler */
-+
- } ctrl_buft;
- 
-+typedef struct
-+{
-+	int vendor;         // vendor id
-+	int prod_id;	    // product id
-+	char *vend_name;    // vendor string
-+	__u8 led_scheme;    // led display scheme
-+	__u8 led_invert;    // invert led aux port settings
-+	__u8 led_bits[8];   // array of 8 possible LED bitmask settings
-+
-+} vendor_data;
-+
- /***************************************************************/
- /* structure defining input+output fifos (interrupt/bulk mode) */
- /***************************************************************/
--struct hfcusb_data;		/* forward definition */
--typedef struct {
--	int fifonum;		/* fifo index attached to this structure */
--	__u8 fifo_mask;		/* mask for this fifo */
--	int active;		/* fifo is currently active */
-+
-+struct usb_fifo;			/* forward definition */
-+typedef struct iso_urb_struct
-+{
-+	struct urb *purb;
-+	__u8 buffer[ISO_BUFFER_SIZE];	/* buffer incoming/outgoing data */
-+	struct usb_fifo *owner_fifo;	// pointer to owner fifo
-+} iso_urb_struct;
-+
-+
-+struct hfcusb_data;			/* forward definition */
-+typedef struct usb_fifo
-+{
-+	int fifonum;			/* fifo index attached to this structure */
-+	int active;			/* fifo is currently active */
- 	struct hfcusb_data *hfc;	/* pointer to main structure */
--	int pipe;		/* address of endpoint */
--	__u8 usb_maxlen;	/* maximum length for usb transfer */
--	int max_size;		/* maximum size of receive/send packet */
--	int transmode;		/* transparent mode selected */
--	int framenum;		/* number of frame when last tx completed */
--	int rx_offset;		/* offset inside rx buffer */
--	int next_complete;	/* complete marker */
--	__u8 *act_ptr;		/* pointer to next data */
--	__u8 intervall;		/* interrupt interval */
--	struct sk_buff *buff;	/* actual used buffer */
--	urb_t urb;		/* transfer structure for usb routines */
--	__u8 buffer[128];	/* buffer incoming/outgoing data */
-+	int pipe;			/* address of endpoint */
-+	__u8 usb_packet_maxlen;		/* maximum length for usb transfer */
-+	unsigned int max_size;		/* maximum size of receive/send packet */
-+	__u8 intervall;			/* interrupt interval */
-+	struct sk_buff *skbuff; 	/* actual used buffer */
-+	struct urb *urb;		/* transfer structure for usb routines */
-+	__u8 buffer[128];		/* buffer incoming/outgoing data */
-+	int bit_line;			/* how much bits are in the fifo? */
-+
-+	volatile __u8 usb_transfer_mode;/* switched between ISO and INT */
-+	iso_urb_struct iso[2];		/* need two urbs to have one always for pending */
-+	struct hisax_if *hif;		/* hisax interface */
-+	int delete_flg;			/* only delete skbuff once */
-+	int last_urblen;		/* remember length of last packet */
-+
- } usb_fifo;
- 
-+
- /*********************************************/
- /* structure holding all data for one device */
- /*********************************************/
--typedef struct hfcusb_data {
--	struct hisax_drvreg regd;	/* register data and callbacks */
--	struct usb_device *dev;	/* our device */
--	int if_used;		/* used interface number */
--	int alt_used;		/* used alternate config */
--	int ctrl_paksize;	/* control pipe packet size */
-+typedef struct hfcusb_data
-+{
-+	// HiSax Interface for loadable Layer1 drivers
-+	struct hisax_d_if d_if;			/* see hisax_if.h */
-+	struct hisax_b_if b_if[2];		/* see hisax_if.h */
-+	int protocol;
-+	
-+	struct usb_device *dev;			/* our device */
-+	int if_used;				/* used interface number */
-+	int alt_used;				/* used alternate config */
-+	int ctrl_paksize;			/* control pipe packet size */
- 	int ctrl_in_pipe, ctrl_out_pipe;	/* handles for control pipe */
-+	int cfg_used;				/* configuration index used */
-+	int vend_idx;				// vendor found
-+
-+	int b_mode[2];				// B-channel mode
-+
-+	int l1_activated;			// layer 1 activated
-+
-+	int packet_size,iso_packet_size;	
- 
- 	/* control pipe background handling */
- 	ctrl_buft ctrl_buff[HFC_CTRL_BUFSIZE];	/* buffer holding queued data */
--	volatile int ctrl_in_idx, ctrl_out_idx, ctrl_cnt;	/* input/output pointer + count */
--	urb_t ctrl_urb;		/* transfer structure for control channel */
--	devrequest ctrl_write;	/* buffer for control write request */
--	devrequest ctrl_read;	/* same for read request */
--
--	volatile __u8 dfifo_fill;	/* value read from tx d-fifo */
--	volatile __u8 active_fifos;	/* fifos currently active as bit mask */
--	volatile __u8 threshold_mask;	/* threshold actually reported */
--	volatile __u8 service_request;	/* fifo needs service from task */
--	volatile __u8 ctrl_fifo;	/* last selected fifo */
--	volatile __u8 bch_enables;	/* or mask for sctrl_r and sctrl register values */
--        volatile __u8 led_req;          /* request status of adapters leds */ 
--        volatile __u8 led_act;          /* active status of adapters leds */ 
-+	volatile int ctrl_in_idx, ctrl_out_idx,
-+		ctrl_cnt;			/* input/output pointer + count */
-+	struct urb *ctrl_urb;			/* transfer structure for control channel */
-+
-+	struct usb_ctrlrequest ctrl_write;	/* buffer for control write request */
-+	struct usb_ctrlrequest ctrl_read;	/* same for read request */
-+
-+	__u8 led_state,led_new_data,led_b_active;
-+
-+	volatile __u8 threshold_mask;		/* threshold actually reported */
-+	volatile __u8 bch_enables;		/* or mask for sctrl_r and sctrl register values */
-+
- 	usb_fifo fifos[HFCUSB_NUM_FIFOS];	/* structure holding all fifo data */
- 
--	/* layer 1 activation/deactivation handling */
--	volatile __u8 l1_state;	/* actual l1 state */
--	volatile ulong l1_event;	/* event mask */
--	struct tq_struct l1_tq;	/* l1 bh structure */
--	struct timer_list t3_timer;	/* timer for activation/deactivation */
--	struct timer_list t4_timer;	/* timer for activation/deactivation */
-+	volatile __u8 l1_state;			/* actual l1 state */
-+	struct timer_list t3_timer;		/* timer 3 for activation/deactivation */
-+	struct timer_list t4_timer;		/* timer 4 for activation/deactivation */
-+	struct timer_list led_timer;		/* timer flashing leds */
-+
- } hfcusb_data;
- 
--#if 0
--static void
--usb_dump_urb(purb_t purb)
--{
--	printk("urb                   :%p\n", purb);
--	printk("next                  :%p\n", purb->next);
--	printk("dev                   :%p\n", purb->dev);
--	printk("pipe                  :%08X\n", purb->pipe);
--	printk("status                :%d\n", purb->status);
--	printk("transfer_flags        :%08X\n", purb->transfer_flags);
--	printk("transfer_buffer       :%p\n", purb->transfer_buffer);
--	printk("transfer_buffer_length:%d\n",
--	       purb->transfer_buffer_length);
--	printk("actual_length         :%d\n", purb->actual_length);
--	printk("setup_packet          :%p\n", purb->setup_packet);
--	printk("start_frame           :%d\n", purb->start_frame);
--	printk("number_of_packets     :%d\n", purb->number_of_packets);
--	printk("interval              :%d\n", purb->interval);
--	printk("error_count           :%d\n", purb->error_count);
--	printk("context               :%p\n", purb->context);
--	printk("complete              :%p\n", purb->complete);
--}
--#endif
- 
--/*************************************************************************/
--/* bottom half handler for L1 activation/deactiavtaion + D-chan + E-chan */
--/*************************************************************************/
--static void
--usb_l1d_bh(hfcusb_data * hfc)
--{
-+static void collect_rx_frame(usb_fifo *fifo,__u8 *data,int len,int finish);
-+
- 
--	while (hfc->l1_event) {
--		if (test_and_clear_bit
--		    (HFCUSB_L1_STATECHANGE, &hfc->l1_event)) {
--			if (hfc->l1_state == 7)
--			    hfc->led_req |= LED_L1;
--			else
--			    hfc->led_req &= ~LED_L1;
--			if ((hfc->l1_state == 7) ||
--			    (hfc->l1_state == 3))
--			    hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
--					       (hfc->l1_state ==
--						7) ? (PH_ACTIVATE |
--						      INDICATION)
--					       : (PH_DEACTIVATE | INDICATION),
--					       NULL);
--		}
--		if (test_and_clear_bit(HFCUSB_L1_DRX, &hfc->l1_event)) {
--			hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
--					   PH_DATA | INDICATION,
--					   (void *) 0);
--		}
--		if (test_and_clear_bit(HFCUSB_L1_ERX, &hfc->l1_event)) {
--			hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
--					   PH_DATA | INDICATION,
--					   (void *) 1);
--		}
--		if (test_and_clear_bit(HFCUSB_L1_DTX, &hfc->l1_event)) {
--			hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
--					   PH_DATA | CONFIRM, NULL);
--		}
--	}			/* while */
--}				/* usb_l1d_bh */
- 
- /******************************************************/
- /* start next background transfer for control channel */
- /******************************************************/
--static void
--ctrl_start_transfer(hfcusb_data * hfc)
-+static void ctrl_start_transfer(hfcusb_data * hfc)
- {
--
--	if (hfc->ctrl_cnt) {
--		switch (hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg) {
--			case HFCUSB_F_USAGE:
--				hfc->ctrl_urb.pipe = hfc->ctrl_in_pipe;
--				hfc->ctrl_urb.setup_packet =
--				    (u_char *) & hfc->ctrl_read;
--				hfc->ctrl_urb.transfer_buffer_length = 1;
--				hfc->ctrl_read.index =
--				    hfc->ctrl_buff[hfc->ctrl_out_idx].
--				    hfc_reg;
--				hfc->ctrl_urb.transfer_buffer =
--				    (char *) &hfc->dfifo_fill;
--				break;
--
--			default:	/* write register */
--				hfc->ctrl_urb.pipe = hfc->ctrl_out_pipe;
--				hfc->ctrl_urb.setup_packet =
--				    (u_char *) & hfc->ctrl_write;
--				hfc->ctrl_urb.transfer_buffer = NULL;
--				hfc->ctrl_urb.transfer_buffer_length = 0;
--				hfc->ctrl_write.index =
--				    hfc->ctrl_buff[hfc->ctrl_out_idx].
--				    hfc_reg;
--				hfc->ctrl_write.value =
--				    hfc->ctrl_buff[hfc->ctrl_out_idx].
--				    reg_val;
--				break;
--		}
--		usb_submit_urb(&hfc->ctrl_urb);	/* start transfer */
-+	int err;
-+	if(hfc->ctrl_cnt)
-+	{
-+		hfc->ctrl_urb->pipe = hfc->ctrl_out_pipe;
-+		hfc->ctrl_urb->setup_packet = (u_char *) & hfc->ctrl_write;
-+		hfc->ctrl_urb->transfer_buffer = NULL;
-+		hfc->ctrl_urb->transfer_buffer_length = 0;
-+		hfc->ctrl_write.wIndex = hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg;
-+		hfc->ctrl_write.wValue = hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val;
-+		err = usb_submit_urb(hfc->ctrl_urb);	/* start transfer */
-+		printk(KERN_DEBUG "ctrl_start_transfer: submit %d\n", err);
- 	}
- }				/* ctrl_start_transfer */
- 
-@@ -293,897 +275,1418 @@
- /* queue a control transfer request */
- /* return 0 on success.             */
- /************************************/
--static int
--queue_control_request(hfcusb_data * hfc, __u8 reg, __u8 val)
-+static int queue_control_request(hfcusb_data * hfc, __u8 reg, __u8 val,int action)
- {
- 	ctrl_buft *buf;
- 
--	if (hfc->ctrl_cnt >= HFC_CTRL_BUFSIZE)
--		return (1);	/* no space left */
--	buf = hfc->ctrl_buff + hfc->ctrl_in_idx;	/* pointer to new index */
-+#ifdef VERBOSE_USB_DEBUG
-+	printk ("HFC_USB: queue_control_request reg: %x, val: %x\n", reg, val);
-+#endif
-+
-+	if(hfc->ctrl_cnt >= HFC_CTRL_BUFSIZE)  return(1);	   /* no space left */
-+	buf = &hfc->ctrl_buff[hfc->ctrl_in_idx];	/* pointer to new index */
- 	buf->hfc_reg = reg;
- 	buf->reg_val = val;
-+	buf->action=action;
- 	if (++hfc->ctrl_in_idx >= HFC_CTRL_BUFSIZE)
- 		hfc->ctrl_in_idx = 0;	/* pointer wrap */
- 	if (++hfc->ctrl_cnt == 1)
- 		ctrl_start_transfer(hfc);
--	return (0);
--}				/* queue_control_request */
-+	return(0);
-+}		/* queue_control_request */
- 
--/**************************************/
--/* called when timer t3 or t4 expires */
--/**************************************/
--static void
--l1_timer_expire(hfcusb_data * hfc)
--{
--    if (timer_pending(&hfc->t4_timer))
--	del_timer(&hfc->t4_timer);
--    queue_control_request(hfc, HFCUSB_STATES, 0x40);
--    test_and_set_bit(HFCUSB_L1_STATECHANGE,
--		     &hfc->l1_event);
--    queue_task(&hfc->l1_tq, &tq_immediate);
--    mark_bh(IMMEDIATE_BH);
--} /* l1_timer_expire */
--
--/**************************************************/
--/* (re)fills a tx-fifo urb. Queuing is done later */
--/**************************************************/
--static void
--fill_tx_urb(usb_fifo * fifo)
--{
--	struct sk_buff *skb;
--	long flags;
--	int i, ii = 0;
--
--	fifo->urb.dev = fifo->hfc->dev;
--	if ((fifo->buff)
--	    && (fifo->urb.transfer_buffer_length < fifo->usb_maxlen)) {
--		switch (fifo->fifonum) {
--			case HFCUSB_B1_TX:
--			case HFCUSB_B2_TX:
--				skb = fifo->buff;
--				fifo->buff = NULL;
--				fifo->hfc->regd.bch_l1l2(fifo->hfc->regd.
--							 arg_hisax,
--							 (fifo->fifonum ==
--							  HFCUSB_B1_TX) ? 0
--							 : 1,
--							 (PH_DATA |
--							  CONFIRM),
--							 (void *) skb);
--				fifo->hfc->service_request |=
--				    fifo->fifo_mask;
--				return;
--			case HFCUSB_D_TX:
--				dev_kfree_skb_any(fifo->buff);
--				fifo->buff = NULL;
--				save_flags(flags);
--				cli();
--				fifo->hfc->dfifo_fill = 0xff;	/* currently invalid data */
--				queue_control_request(fifo->hfc,
--						      HFCUSB_FIFO,
--						      HFCUSB_D_TX);
--				queue_control_request(fifo->hfc,
--						      HFCUSB_F_USAGE, 0);
--				restore_flags(flags);
--				return;
--			default:
--				return;	/* error, invalid fifo */
--		}
-+
-+static int control_action_handler(hfcusb_data *hfc,int reg,int val,int action)
-+{
-+	if(!action) return(1);  // no action defined
-+
-+	return(0);
-+}
-+
-+
-+/***************************************************************/
-+/* control completion routine handling background control cmds */
-+/***************************************************************/
-+static void ctrl_complete(struct urb *urb)
-+{
-+	hfcusb_data *hfc = (hfcusb_data *) urb->context;
-+	ctrl_buft *buf;
-+
-+	printk(KERN_DEBUG "ctrl_complete cnt %d\n", hfc->ctrl_cnt);
-+	urb->dev = hfc->dev;
-+	if(hfc->ctrl_cnt)
-+	{
-+		buf=&hfc->ctrl_buff[hfc->ctrl_out_idx];
-+		control_action_handler(hfc,buf->hfc_reg,buf->reg_val,buf->action);
-+
-+		hfc->ctrl_cnt--;	/* decrement actual count */
-+		if(++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE) hfc->ctrl_out_idx = 0;	/* pointer wrap */
-+
-+		ctrl_start_transfer(hfc);	/* start next transfer */
-+	}
-+}				/* ctrl_complete */
-+
-+
-+
-+#define LED_OFF      0   // no LED support
-+#define LED_SCHEME1  1	 // LED standard scheme
-+#define LED_SCHEME2  2	 // not used yet...
-+
-+#define LED_POWER_ON	1
-+#define LED_POWER_OFF	2
-+#define LED_S0_ON		3
-+#define LED_S0_OFF		4
-+#define LED_B1_ON		5
-+#define LED_B1_OFF		6
-+#define LED_B1_DATA		7
-+#define LED_B2_ON		8
-+#define LED_B2_OFF		9
-+#define LED_B2_DATA	   10
-+
-+#define LED_NORMAL   0	 // LEDs are normal
-+#define LED_INVERTED 1   // LEDs are inverted
-+
-+// time for LED flashing
-+#define LED_TIME      250
-+
-+vendor_data vdata[]=
-+{
-+    {0x959, 0x2bd0, "ISDN USB TA (Cologne Chip HFC-S USB based)", LED_OFF,LED_NORMAL,{4,0,2,1}},     /* CologneChip Eval TA */
-+	{0x7b0, 0x0007, "Billion tiny USB ISDN TA 128", LED_SCHEME1,  LED_INVERTED, {8,0x40,0x20,0x10}},  /* Billion TA */
-+	{0x742, 0x2008, "Stollmann USB TA",             LED_SCHEME1,  LED_NORMAL,   {4,0,2,1}},           /* Stollmann TA */
-+	{0x8e3, 0x0301, "Olitec USB RNIS",              LED_SCHEME1,  LED_NORMAL,   {2,0,1,4}},           /* Olitec TA  */
-+	{0x675, 0x1688, "DrayTec USB ISDN TA",          LED_SCHEME1,  LED_NORMAL,   {4,0,2,1}},           /* Draytec TA */
-+	{0x7fa, 0x0846, "Bewan Modem RNIS USB",         LED_SCHEME1,  LED_INVERTED, {8,0x40,0x20,0x10}},  /* Bewan TA   */
-+	{0}			   // EOL element
-+};
-+										
-+/***************************************************/
-+/* write led data to auxport & invert if necessary */
-+/***************************************************/
-+static void write_led(hfcusb_data * hfc,__u8 led_state)
-+{
-+	if(led_state!=hfc->led_state)
-+	{
-+		hfc->led_state=led_state;
-+		queue_control_request(hfc, HFCUSB_P_DATA,(vdata[hfc->vend_idx].led_invert) ? ~led_state : led_state,1);
-+	}
-+}
-+
-+/******************************************/
-+/* invert B-channel LEDs if data is sent  */
-+/******************************************/
-+static void led_timer(hfcusb_data * hfc)
-+{
-+   	static int cnt=0;
-+	__u8 led_state=hfc->led_state;
-+
-+	if(cnt)
-+	{
-+		if(hfc->led_b_active&1) led_state|=vdata[hfc->vend_idx].led_bits[2];
-+		if(hfc->led_b_active&2) led_state|=vdata[hfc->vend_idx].led_bits[3];
-+	}
-+	else
-+	{
-+		if(!(hfc->led_b_active&1) || hfc->led_new_data&1) led_state&=~vdata[hfc->vend_idx].led_bits[2];
-+		if(!(hfc->led_b_active&2) || hfc->led_new_data&2) led_state&=~vdata[hfc->vend_idx].led_bits[3];
- 	}
- 
--	/* check if new buffer needed */
--	if (!fifo->buff) {
--		switch (fifo->fifonum) {
--			case HFCUSB_B1_TX:
--				if (fifo->hfc->regd.bsk[0])
--					fifo->buff = *fifo->hfc->regd.bsk[0];	/* B1-channel tx buffer */
-+	write_led(hfc,led_state);
-+	hfc->led_new_data=0;
-+
-+	cnt=!cnt;
-+	// restart 4 hz timer
-+	hfc->led_timer.expires = jiffies + (LED_TIME * HZ) / 1000;
-+	if(!timer_pending(&hfc->led_timer)) add_timer(&hfc->led_timer);
-+}
-+
-+/**************************/
-+/* handle LED requests    */
-+/**************************/
-+static void handle_led(hfcusb_data * hfc,int event)
-+{
-+	__u8 led_state=hfc->led_state;
-+
-+	// if no scheme -> no LED action
-+   	if(vdata[hfc->vend_idx].led_scheme==LED_OFF) return;
-+
-+	switch(event)
-+	{
-+		case LED_POWER_ON:
-+				   led_state|=vdata[hfc->vend_idx].led_bits[0];
-+				break;
-+		case LED_POWER_OFF: // no Power off handling
-+				break;
-+		case LED_S0_ON:
-+				   led_state|=vdata[hfc->vend_idx].led_bits[1];
-+				break;
-+		case LED_S0_OFF:
-+				   led_state&=~vdata[hfc->vend_idx].led_bits[1];
- 				break;
--			case HFCUSB_B2_TX:
--				if (fifo->hfc->regd.bsk[1])
--					fifo->buff = *fifo->hfc->regd.bsk[1];	/* B2-channel tx buffer */
-+		case LED_B1_ON:
-+					hfc->led_b_active|=1;
- 				break;
--			case HFCUSB_D_TX:
--				if (fifo->hfc->regd.dsq)
--					fifo->buff = skb_dequeue(fifo->hfc->regd.dsq);	/* D-channel tx queue */
-+		case LED_B1_OFF:
-+					hfc->led_b_active&=~1;
- 				break;
--			default:
--				return;	/* error, invalid fifo */
-+		case LED_B1_DATA:
-+				   hfc->led_new_data|=1;
-+				break;
-+		case LED_B2_ON:
-+				   hfc->led_b_active|=2;
-+				break;
-+		case LED_B2_OFF:
-+					hfc->led_b_active&=~2;
-+				break;
-+		case LED_B2_DATA:
-+				   hfc->led_new_data|=2;
-+				break;
-+	}
-+	
-+	write_led(hfc,led_state);
-+}
-+
-+/********************************/
-+/* called when timer t3 expires */
-+/********************************/
-+static void l1_timer_expire_t3(hfcusb_data * hfc)
-+{
-+    //printk (KERN_INFO "HFC-USB: l1_timer_expire_t3\n");
-+
-+	hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,PH_DEACTIVATE | INDICATION,NULL);
-+#ifdef VERBOSE_USB_DEBUG
-+	printk(KERN_INFO "PH_DEACTIVATE | INDICATION sent\n");
-+#endif
-+	hfc->l1_activated=FALSE;
-+	handle_led(hfc,LED_S0_OFF);
-+}
-+
-+/********************************/
-+/* called when timer t4 expires */
-+/********************************/
-+static void l1_timer_expire_t4(hfcusb_data * hfc)
-+{
-+    //printk (KERN_INFO "HFC-USB: l1_timer_expire_t4\n");
-+
-+	hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,PH_DEACTIVATE | INDICATION,NULL);
-+#ifdef VERBOSE_USB_DEBUG
-+	printk(KERN_INFO "PH_DEACTIVATE | INDICATION sent\n");
-+#endif
-+	hfc->l1_activated=FALSE;
-+	handle_led(hfc,LED_S0_OFF);
-+}
-+
-+/*****************************/
-+/* handle S0 state changes   */
-+/*****************************/
-+static void state_handler(hfcusb_data * hfc,__u8 state)
-+{
-+	__u8 old_state;
-+
-+	old_state=hfc->l1_state;
-+
-+	// range check
-+	if(state==old_state || state<1 || state>8) return;
-+
-+#ifdef VERBOSE_ISDN_DEBUG
-+	printk(KERN_INFO "HFC-USB: new S0 state:%d old_state:%d\n",state,old_state);
-+#endif
-+
-+	if(state<4 || state==7 || state==8)
-+	{
-+        if(timer_pending(&hfc->t3_timer)) del_timer(&hfc->t3_timer);
-+		//printk(KERN_INFO "HFC-USB: T3 deactivated\n");
-+	}
-+
-+	if(state>=7)
-+	{
-+        if(timer_pending(&hfc->t4_timer)) del_timer(&hfc->t4_timer);
-+		//printk(KERN_INFO "HFC-USB: T4 deactivated\n");
-+	}
-+
-+	if(state==7 && !hfc->l1_activated)
-+	{
-+		hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,PH_ACTIVATE | INDICATION,NULL);
-+		//printk(KERN_INFO "HFC-USB: PH_ACTIVATE | INDICATION sent\n");
-+		hfc->l1_activated=TRUE;
-+		handle_led(hfc,LED_S0_ON);
-+	}
-+	else
-+	if(state<=3 /* && activated*/)
-+	{
-+		if(old_state==7 || old_state==8)
-+		{
-+			//printk(KERN_INFO "HFC-USB: T4 activated\n");
-+			hfc->t4_timer.expires = jiffies + (HFC_TIMER_T4 * HZ) / 1000;
-+			if(!timer_pending(&hfc->t4_timer)) add_timer(&hfc->t4_timer);
- 		}
--		if (!fifo->buff) {
--			fifo->active = 0;	/* we are inactive now */
--			fifo->hfc->active_fifos &= ~fifo->fifo_mask;
--			if (fifo->fifonum == HFCUSB_D_TX) {
--				test_and_set_bit(HFCUSB_L1_DTX,
--						 &fifo->hfc->l1_event);
--				queue_task(&fifo->hfc->l1_tq,
--					   &tq_immediate);
--				mark_bh(IMMEDIATE_BH);
--			}
--			return;
-+		else
-+		{
-+			hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,PH_DEACTIVATE | INDICATION,NULL);
-+			//printk(KERN_INFO "HFC-USB: PH_DEACTIVATE | INDICATION sent\n");
-+			hfc->l1_activated=FALSE;
-+			handle_led(hfc,LED_S0_OFF);
- 		}
--		fifo->act_ptr = fifo->buff->data;	/* start of data */
--		fifo->active = 1;
--		ii = 1;
--		fifo->hfc->active_fifos |= fifo->fifo_mask;
--		fifo->hfc->service_request &= ~fifo->fifo_mask;
--	}
--	/* fillup the send buffer */
--	i = fifo->buff->len - (fifo->act_ptr - fifo->buff->data);	/* remaining length */
--	fifo->buffer[0] = !fifo->transmode;	/* not eof */
--	if (i > (fifo->usb_maxlen - ii)) {
--		i = fifo->usb_maxlen - ii;
--	}
--	if (i)
--		memcpy(fifo->buffer + ii, fifo->act_ptr, i);
--	fifo->urb.transfer_buffer_length = i + ii;
--        fifo->rx_offset = ii;
--}				/* fill_tx_urb */
--
--/************************************************/
--/* transmit completion routine for all tx fifos */
--/************************************************/
--static void
--tx_complete(purb_t urb)
-+	}
-+
-+	hfc->l1_state=state;
-+}
-+
-+
-+/* prepare iso urb */
-+static void fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe, void *buf,
-+	int num_packets, int packet_size, int interval, usb_complete_t complete, void *context)
- {
--	usb_fifo *fifo = (usb_fifo *) urb->context;	/* pointer to our fifo */
-+	int k;
- 
--	fifo->hfc->service_request &= ~fifo->fifo_mask;	/* no further handling */
--	fifo->framenum = usb_get_current_frame_number(fifo->hfc->dev);
-+	spin_lock_init(&urb->lock);	// do we really need spin_lock_init ?
-+	urb->dev = dev;
-+	urb->pipe = pipe;
-+	urb->complete = complete;
-+	urb->number_of_packets = num_packets;
-+	urb->transfer_buffer_length = packet_size * num_packets;
-+	urb->context = context;
-+	urb->transfer_buffer = buf;
-+	urb->transfer_flags = 0;
-+	urb->transfer_flags = USB_ISO_ASAP;
-+	urb->actual_length = 0;
-+	urb->interval = interval;
-+	for (k = 0; k < num_packets; k++) {
-+		urb->iso_frame_desc[k].offset = packet_size * k;
-+		urb->iso_frame_desc[k].length = packet_size;
-+		urb->iso_frame_desc[k].actual_length = 0;
-+	}
-+}
- 
--	/* check for deactivation or error */
--	if ((!fifo->active) || (urb->status)) {
--		fifo->hfc->active_fifos &= ~fifo->fifo_mask;	/* we are inactive */
--		fifo->active = 0;
--		if ((fifo->buff) && (fifo->fifonum == HFCUSB_D_TX)) {
--			dev_kfree_skb_any(fifo->buff);
-+/* allocs urbs and start isoc transfer with two pending urbs to avoid gaps in the transfer chain */
-+static int start_isoc_chain(usb_fifo * fifo, int num_packets_per_urb,usb_complete_t complete,int packet_size)
-+{
-+	int i, k, errcode;
-+
-+#ifdef VERBOSE_USB_DEBUG
-+	printk(KERN_INFO "HFC-USB: starting ISO-chain for Fifo %i\n",  fifo->fifonum);
-+#endif
-+
-+
-+	// allocate Memory for Iso out Urbs
-+	for (i = 0; i < 2; i++) {
-+		if (!(fifo->iso[i].purb)) {
-+			fifo->iso[i].purb = usb_alloc_urb(num_packets_per_urb);
-+			fifo->iso[i].owner_fifo = (struct usb_fifo *) fifo;
-+
-+			// Init the first iso
-+			if (ISO_BUFFER_SIZE >= (fifo->usb_packet_maxlen * num_packets_per_urb))
-+			{
-+
-+				fill_isoc_urb(fifo->iso[i].purb, fifo->hfc->dev, fifo->pipe, fifo->iso[i].buffer,
-+					num_packets_per_urb, fifo->usb_packet_maxlen, fifo->intervall,
-+					complete, &fifo->iso[i]);
-+
-+				memset(fifo->iso[i].buffer, 0, sizeof(fifo->iso[i].buffer));
-+
-+				// defining packet delimeters in fifo->buffer
-+				for(k = 0; k < num_packets_per_urb; k++)
-+				{
-+					fifo->iso[i].purb->iso_frame_desc[k].offset = k*packet_size;
-+					fifo->iso[i].purb->iso_frame_desc[k].length = packet_size;
-+				}
-+			}
- 		}
--		fifo->buff = NULL;
--		return;
-+
-+		fifo->bit_line = BITLINE_INF;
-+
-+		errcode = usb_submit_urb(fifo->iso[i].purb);
-+		fifo->active = (errcode >= 0) ? 1 : 0;
-+		if(errcode < 0)
-+		{
-+			printk(KERN_INFO "HFC-USB: error submitting ISO URB: %i.%i \n",  errcode, i);
-+		};
-+
- 	}
--	fifo->act_ptr += (urb->transfer_buffer_length - fifo->rx_offset);	/* adjust pointer */
--	fill_tx_urb(fifo);	/* refill the urb */
--	fifo->hfc->threshold_mask |= fifo->fifo_mask;	/* assume threshold reached */
--	if (fifo->buff)
--		fifo->hfc->service_request |= fifo->fifo_mask;	/* need to restart */
--}				/* tx_complete */
- 
--/***********************************************/
--/* receive completion routine for all rx fifos */
--/***********************************************/
--static void
--rx_complete(purb_t urb)
-+	// errcode = (usb_submit_urb(fifo->iso[0].purb, GFP_KERNEL));
-+	return(fifo->active);
-+}
-+
-+/* stops running iso chain and frees their pending urbs */
-+static void stop_isoc_chain(usb_fifo * fifo)
- {
--	usb_fifo *fifo = (usb_fifo *) urb->context;	/* pointer to our fifo */
--	hfcusb_data *hfc = fifo->hfc;
--	usb_fifo *txfifo;
--	__u8 last_state;
--	int i, ii, currcnt, hdlci;
--	struct sk_buff *skb;
--
--	urb->dev = hfc->dev; /* security init */
--	if ((!fifo->active) || (urb->status)) {
--		hfc->service_request &= ~fifo->fifo_mask;	/* no further handling */
--		hfc->active_fifos &= ~fifo->fifo_mask;	/* we are inactive */
--		fifo->urb.interval = 0;	/* cancel automatic rescheduling */
--		if (fifo->buff) {
--			dev_kfree_skb_any(fifo->buff);
--			fifo->buff = NULL;
-+	int i;
-+
-+	for(i = 0; i < 2; i++)
-+	{
-+		if(fifo->iso[i].purb)
-+		{
-+#ifdef VERBOSE_USB_DEBUG
-+			printk(KERN_INFO "HFC-USB: Stopping iso chain for fifo %i.%i\n", fifo->fifonum, i);
-+#endif
-+			usb_unlink_urb(fifo->iso[i].purb);
-+			usb_free_urb(fifo->iso[i].purb);
-+			fifo->iso[i].purb = NULL;
- 		}
--		return;
- 	}
-+	if (fifo->urb) {
-+		usb_unlink_urb(fifo->urb);
-+		usb_free_urb(fifo->urb);
-+		fifo->urb = NULL;
-+	}
-+	fifo->active = 0;
-+}
- 
--	/* first check for any status changes */
--	if ((urb->actual_length < fifo->rx_offset)
--	    || (urb->actual_length > fifo->usb_maxlen))
--		return;		/* error condition */
--
--	if (fifo->rx_offset) {
--		hfc->threshold_mask = fifo->buffer[1];	/* update threshold status */
--		fifo->next_complete = fifo->buffer[0] & 1;
--		if ((fifo->fifonum == HFCUSB_D_RX) &&
--		    (hfc->led_req != hfc->led_act))
--		    queue_control_request(hfc, HFCUSB_P_DATA, hfc->led_req);
--
--		/* check if rescheduling needed */
--		if ((i =
--		     hfc->service_request & hfc->active_fifos & ~hfc->
--		     threshold_mask)) {
--			currcnt =
--			    usb_get_current_frame_number(hfc->dev);
--			txfifo = hfc->fifos + HFCUSB_B1_TX;
--			ii = 3;
--			while (ii--) {
--				if ((i & txfifo->fifo_mask)
--				    && (currcnt != txfifo->framenum)) {
--					hfc->service_request &=
--					    ~txfifo->fifo_mask;
--					if (!txfifo->buff)
--						fill_tx_urb(txfifo);
--					if (txfifo->buff)
--						usb_submit_urb(&txfifo->
--							       urb);
-+// defines how much ISO packets are handled in one URB
-+static int iso_packets[8]={ISOC_PACKETS_B,ISOC_PACKETS_B,ISOC_PACKETS_B,ISOC_PACKETS_B,
-+	                       ISOC_PACKETS_D,ISOC_PACKETS_D,ISOC_PACKETS_D,ISOC_PACKETS_D};
-+
-+/*****************************************************/
-+/* transmit completion routine for all ISO tx fifos */
-+/*****************************************************/
-+static void tx_iso_complete(struct urb *urb)
-+{
-+	iso_urb_struct *context_iso_urb = (iso_urb_struct *) urb->context;
-+	usb_fifo *fifo = context_iso_urb->owner_fifo;
-+	hfcusb_data *hfc = fifo->hfc;
-+	int k, tx_offset, num_isoc_packets, sink, len, current_len,errcode,frame_complete,transp_mode,fifon;
-+	__u8 threshbit;
-+	__u8 threshtable[8] = { 1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
-+
-+	fifon=fifo->fifonum;
-+	tx_offset=0;
-+	// very weird error code when using ohci drivers, for now : ignore this error ...  (MB)
-+	if(urb->status == -EOVERFLOW)
-+	{
-+		urb->status = 0;
-+#ifdef VERBOSE_USB_DEBUG
-+		printk(KERN_INFO "HFC-USB: ignoring USB DATAOVERRUN  for fifo  %i \n",fifon);
-+#endif
-+	}
-+
-+	if(fifo->active && !urb->status)
-+	{
-+		transp_mode=0;
-+		if(fifon<4 && hfc->b_mode[fifon/2]==L1_MODE_TRANS) transp_mode=TRUE;
-+
-+		threshbit = threshtable[fifon] & hfc->threshold_mask;	// is threshold set for our channel?
-+		num_isoc_packets=iso_packets[fifon];
-+
-+		if(fifon >= HFCUSB_D_TX)
-+		{
-+			sink = (threshbit) ? SINK_DMIN : SINK_DMAX;	// how much bit go to the sink for D-channel?
-+		}
-+		else
-+		{
-+			sink = (threshbit) ? SINK_MIN : SINK_MAX;	// how much bit go to the sink for B-channel?
-+		}
-+
-+		// prepare ISO Urb
-+		fill_isoc_urb(urb, fifo->hfc->dev, fifo->pipe,context_iso_urb->buffer, num_isoc_packets,
-+			fifo->usb_packet_maxlen, fifo->intervall, tx_iso_complete, urb->context);
-+		memset(context_iso_urb->buffer, 0, sizeof(context_iso_urb->buffer));
-+
-+		frame_complete=FALSE;
-+
-+		// Generate Iso Packets
-+		for(k = 0; k < num_isoc_packets; ++k)
-+		{
-+			if(fifo->skbuff)
-+			{
-+				len = fifo->skbuff->len;	// remaining length
-+
-+				fifo->bit_line -= sink;	// we lower data margin every msec
-+				current_len = (0 - fifo->bit_line) / 8;
-+				if(current_len > 14) current_len = 14;	// maximum 15 byte for every ISO packet makes our life easier
-+				current_len = (len <= current_len) ? len : current_len;
-+				fifo->bit_line += current_len * 8;	// how much bit do we put on the line?
-+
-+				context_iso_urb->buffer[tx_offset] = 0;
-+				if(current_len == len)
-+				{
-+					if(!transp_mode)
-+					{
-+						context_iso_urb->buffer[tx_offset] = 1;	// here frame completion
-+						fifo->bit_line += 32;	// add 2 byte flags and 16bit CRC at end of ISDN frame
-+					}
-+					frame_complete = TRUE;
-+				}
-+
-+				// copy bytes from buffer into ISO_URB
-+				memcpy(context_iso_urb->buffer+tx_offset+1,fifo->skbuff->data,current_len);
-+				skb_pull(fifo->skbuff,current_len);
-+
-+				// define packet delimeters within the URB buffer
-+				urb->iso_frame_desc[k].offset = tx_offset;
-+				urb->iso_frame_desc[k].length = current_len + 1;
-+
-+				tx_offset += (current_len + 1);
-+				// printk(KERN_INFO "HFC-USB: fifonum:%d,%d bytes to send, %d bytes ISO packet,bitline:%d,sink:%d,threshbit:%d,threshmask:%x\n",fifon,len,current_len,fifo->bit_line,sink,threshbit,hfc->threshold_mask);
-+				if(!transp_mode)
-+				{
-+					if(fifon==HFCUSB_B1_TX) handle_led(hfc,LED_B1_DATA);
-+					if(fifon==HFCUSB_B2_TX) handle_led(hfc,LED_B2_DATA);
-+				}
-+			}
-+			else
-+			{
-+				// we have no more data - generate 1 byte ISO packets
-+				urb->iso_frame_desc[k].offset = tx_offset++;
-+
-+				urb->iso_frame_desc[k].length = 1;
-+				fifo->bit_line -= sink;	// we lower data margin every msec
-+
-+				if(fifo->bit_line < BITLINE_INF)
-+				{
-+					fifo->bit_line = BITLINE_INF;
-+					//printk (KERN_INFO "HFC-USB: BITLINE_INF underrun\n");
- 				}
--				txfifo += 2;
- 			}
--		}
- 
--		/* handle l1 events */
--		if ((fifo->buffer[0] >> 4) != hfc->l1_state) {
--			last_state = hfc->l1_state;
--			hfc->l1_state = fifo->buffer[0] >> 4;	/* update status */
--			if (timer_pending(&hfc->t4_timer))
--			    del_timer(&hfc->t4_timer);
--			if (((hfc->l1_state == 3) && 
--			     ((last_state == 7) || 
--			      (last_state == 8))) || 
--			    ((timer_pending(&hfc->t3_timer) &&
--			    (hfc->l1_state == 8)))) {
--			    hfc->t4_timer.expires = jiffies + 2;
--			    add_timer(&hfc->t4_timer);
--			} else { 
--				if (timer_pending(&hfc->t3_timer)
--				    && (hfc->l1_state == 7))
--					del_timer(&hfc->t3_timer);	/* no longer needed */
--				test_and_set_bit(HFCUSB_L1_STATECHANGE,
--						 &hfc->l1_event);
--				queue_task(&hfc->l1_tq, &tq_immediate);
--				mark_bh(IMMEDIATE_BH);
-+			if(frame_complete)
-+			{
-+				// delete the buffer only once, here or in hfc_usb_l2l1() in a PH_DATA|REQUEST
-+				fifo->delete_flg=TRUE;
-+
-+				fifo->hif->l1l2(fifo->hif,PH_DATA|CONFIRM,(void*)fifo->skbuff->truesize);
-+
-+				if(fifo->skbuff && fifo->delete_flg)
-+				{
-+					dev_kfree_skb_any(fifo->skbuff);
-+					//printk(KERN_INFO "HFC-USB: skbuff=NULL on fifo:%d\n",fifo->fifonum);
-+					fifo->skbuff = NULL;
-+					fifo->delete_flg=FALSE;
-+				}
-+
-+				frame_complete=FALSE;
- 			}
-+        }
-+
-+		errcode = usb_submit_urb(urb);
-+		if(errcode < 0)
-+		{
-+			printk(KERN_INFO "HFC-USB: error submitting ISO URB: %i \n",  errcode);
-+		}
-+	}
-+	else
-+	{
-+		if(urb->status)
-+		{
-+			printk(KERN_INFO "HFC-USB: tx_iso_complete : urb->status %i, fifonum %i\n",  urb->status,fifon);
- 		}
- 	}
- 
--	/* check the length for data and move if present */
--	if (fifo->next_complete || (urb->actual_length > fifo->rx_offset)) {
--		i = fifo->buff->len + urb->actual_length - fifo->rx_offset;	/* new total length */
--		hdlci = (fifo->transmode) ? 0 : 3;
--		if (i <= (fifo->max_size + hdlci)) {
--			memcpy(fifo->act_ptr,
--			       fifo->buffer + fifo->rx_offset,
--			       urb->actual_length - fifo->rx_offset);
--			fifo->act_ptr +=
--			    (urb->actual_length - fifo->rx_offset);
--			fifo->buff->len +=
--			    (urb->actual_length - fifo->rx_offset);
--		} else
--			fifo->buff->len = fifo->max_size + 4;	/* mark frame as to long */
--		if (fifo->next_complete && (urb->actual_length < fifo->usb_maxlen)) {
--		    /* the frame is complete */
--		    fifo->next_complete = 0;
--		    if (((!*(fifo->act_ptr - 1)) || fifo->transmode) &&
--			(fifo->buff->len >= (hdlci + 1))
--			&& (fifo->buff->len <=
--			    (fifo->max_size + hdlci)) &&
--			((skb = dev_alloc_skb(fifo->max_size + hdlci)) != NULL)) {
--			fifo->buff->len -= hdlci;	/* adjust size */
--			switch (fifo->fifonum) {
--			    case HFCUSB_D_RX:
--				skb_queue_tail(hfc->regd.
--					       drq,
--					       fifo->buff);
--				test_and_set_bit
--				    (HFCUSB_L1_DRX,
--				     &hfc->l1_event);
--				queue_task(&hfc->l1_tq,
--					   &tq_immediate);
--				mark_bh(IMMEDIATE_BH);
--				break;
-+}				/* tx_iso_complete */
- 
--			    case HFCUSB_B1_RX:
--				if (hfc->regd.brq[0]) {
--				    skb_queue_tail
--					(hfc->regd.
--					 brq[0],
--					 fifo->buff);
--				    hfc->regd.
--					bch_l1l2(hfc->
--						 regd.
--						 arg_hisax,
--						 0,
--						 PH_DATA
--						 |
--						 INDICATION,
--						 (void *)
--						 fifo->
--						 buff);
--				} else
--				    dev_kfree_skb_any
--					(fifo->buff);
--				break;
--				
--			    case HFCUSB_B2_RX:
--				if (hfc->regd.brq[1]) {
--				    skb_queue_tail
--					(hfc->regd.
--					 brq[1],
--					 fifo->buff);
--				    hfc->regd.
--					bch_l1l2(hfc->
--						 regd.
--						 arg_hisax,
--						 1,
--						 PH_DATA
--						 |
--						 INDICATION,
--						 (void
--						  *)
--						 fifo->
--						 buff);
--				} else
--				    dev_kfree_skb_any
--					(fifo->buff);
--				break;
-+/*****************************************************/
-+/* receive completion routine for all ISO tx fifos   */
-+/*****************************************************/
-+static void rx_iso_complete(struct urb *urb)
-+{
-+	iso_urb_struct *context_iso_urb = (iso_urb_struct *) urb->context;
-+	usb_fifo *fifo = context_iso_urb->owner_fifo;
-+	hfcusb_data *hfc = fifo->hfc;
-+	int k, len, errcode, offset, num_isoc_packets,fifon;
-+	__u8 *buf;
- 
--			    case HFCUSB_PCM_RX:
--				skb_queue_tail(&hfc->regd.
--					       erq,
--					       fifo->buff);
--				test_and_set_bit
--				    (HFCUSB_L1_ERX,
--				     &hfc->l1_event);
--				queue_task(&hfc->l1_tq,
--					   &tq_immediate);
--				mark_bh(IMMEDIATE_BH);
--				break;
-+	fifon=fifo->fifonum;
-+	// very weird error code when using ohci drivers, for now : ignore this error ...  (MB)
-+	if(urb->status == -EOVERFLOW)
-+	{
-+		urb->status = 0;
-+#ifdef VERBOSE_USB_DEBUG
-+		printk(KERN_INFO "HFC-USB: ignoring USB DATAOVERRUN  for fifo  %i \n",fifon);
-+#endif
-+	}
- 
--			    default:
--				dev_kfree_skb_any(fifo->
--						  buff);
--				break;
-+	if(fifo->active && !urb->status)
-+	{
-+		num_isoc_packets=iso_packets[fifon];
-+
-+		// Generate D-Channel Iso Packets
-+		for(k = 0; k < num_isoc_packets; ++k)
-+		{
-+			len=urb->iso_frame_desc[k].actual_length;
-+			offset=urb->iso_frame_desc[k].offset;
-+			buf=context_iso_urb->buffer+offset;
-+
-+			if(fifo->last_urblen!=fifo->usb_packet_maxlen)
-+			{
-+				// the threshold mask is in the 2nd status byte
-+				hfc->threshold_mask=buf[1];
-+				// the S0 state is in the upper half of the 1st status byte
-+				state_handler(hfc,buf[0] >> 4);
-+				// if we have more than the 2 status bytes -> collect data
-+				if(len>2) collect_rx_frame(fifo,buf+2,len-2,buf[0]&1);
- 			}
--			fifo->buff = skb;
--		    } 
--		    fifo->buff->len = 0;	/* reset counter */
--		    fifo->act_ptr = fifo->buff->data;	/* and pointer */
-+			else collect_rx_frame(fifo,buf,len,0);
-+
-+			fifo->last_urblen=len;
-+
-+        }
-+
-+		// prepare ISO Urb
-+		fill_isoc_urb(urb, fifo->hfc->dev, fifo->pipe,context_iso_urb->buffer, num_isoc_packets,
-+			fifo->usb_packet_maxlen, fifo->intervall, rx_iso_complete, urb->context);
-+
-+		errcode = usb_submit_urb(urb);
-+		if(errcode < 0)
-+		{
-+			printk(KERN_INFO "HFC-USB: error submitting ISO URB: %i \n",  errcode);
-+		}
-+	}
-+	else
-+	{
-+		if(urb->status)
-+		{
-+			printk(KERN_INFO "HFC-USB: rx_iso_complete : urb->status %i, fifonum %i\n",  urb->status,fifon);
-+		}
-+	}
-+}				/* rx_iso_complete */
-+
-+
-+/*****************************************************/
-+/* collect data from interrupt or isochron in        */
-+/*****************************************************/
-+static void collect_rx_frame(usb_fifo *fifo,__u8 *data,int len,int finish)
-+{
-+	hfcusb_data *hfc = fifo->hfc;
-+	int transp_mode,fifon;
-+
-+	fifon=fifo->fifonum;
-+	transp_mode=0;
-+	if(fifon<4 && hfc->b_mode[fifon/2]==L1_MODE_TRANS) transp_mode=TRUE;
-+
-+	//printk(KERN_INFO "HFC-USB: got %d bytes finish:%d max_size:%d fifo:%d\n",len,finish,fifo->max_size,fifon);
-+	if(!fifo->skbuff)
-+	{
-+		// allocate sk buffer
-+		fifo->skbuff=dev_alloc_skb(fifo->max_size + 3);
-+		if(!fifo->skbuff)
-+		{
-+			printk(KERN_INFO "HFC-USB: cannot allocate buffer (dev_alloc_skb) fifo:%d\n",fifon);
-+			return;
-+		}
-+		
-+	}
-+
-+	if(len && fifo->skbuff->len+len<fifo->max_size)
-+	{
-+		memcpy(skb_put(fifo->skbuff,len),data,len);
-+	}
-+	else printk(KERN_INFO "HCF-USB: got frame exceeded fifo->max_size:%d\n",fifo->max_size);
-+
-+	// give transparent data up, when 128 byte are available
-+	if(transp_mode && fifo->skbuff->len>=128)
-+	{
-+		fifo->hif->l1l2(fifo->hif,PH_DATA | INDICATION,fifo->skbuff);
-+		fifo->skbuff = NULL;  // buffer was freed from upper layer
-+		return;
-+	}
-+
-+	// we have a complete hdlc packet
-+	if(finish)
-+	{
-+		if(!fifo->skbuff->data[fifo->skbuff->len-1])
-+		{
-+			skb_trim(fifo->skbuff,fifo->skbuff->len-3);  // remove CRC & status
-+
-+			//printk(KERN_INFO "HFC-USB: got frame %d bytes on fifo:%d\n",fifo->skbuff->len,fifon);
-+
-+			if(fifon==HFCUSB_PCM_RX) fifo->hif->l1l2(fifo->hif,PH_DATA_E | INDICATION,fifo->skbuff);
-+			else fifo->hif->l1l2(fifo->hif,PH_DATA | INDICATION,fifo->skbuff);
-+
-+			fifo->skbuff = NULL;  // buffer was freed from upper layer
-+		}
-+		else
-+		{
-+			printk(KERN_INFO "HFC-USB: got frame %d bytes but CRC ERROR!!!\n",fifo->skbuff->len);
-+
-+			skb_trim(fifo->skbuff,0);  // clear whole buffer
-+		}
-+	}
-+
-+	// LED flashing only in HDLC mode
-+	if(!transp_mode)
-+	{
-+		if(fifon==HFCUSB_B1_RX) handle_led(hfc,LED_B1_DATA);
-+		if(fifon==HFCUSB_B2_RX) handle_led(hfc,LED_B2_DATA);
-+	}
-+}
-+
-+/***********************************************/
-+/* receive completion routine for all rx fifos */
-+/***********************************************/
-+static void rx_complete(struct urb *urb)
-+{
-+	int len;
-+	__u8 *buf;
-+	usb_fifo *fifo = (usb_fifo *) urb->context;	/* pointer to our fifo */
-+	hfcusb_data *hfc = fifo->hfc;
-+
-+	urb->dev = hfc->dev;	/* security init */
-+
-+	if((!fifo->active) || (urb->status)) {
-+#ifdef VERBOSE_USB_DEBUG
-+		printk(KERN_INFO "HFC-USB: RX-Fifo %i is going down (%i)\n", fifo->fifonum, urb->status);
-+#endif
-+		fifo->urb->interval = 0;	/* cancel automatic rescheduling */
-+		if(fifo->skbuff) {
-+			dev_kfree_skb_any(fifo->skbuff);
-+			fifo->skbuff = NULL;
- 		}
-+		return;
- 	}
--	fifo->rx_offset = (urb->actual_length < fifo->usb_maxlen) ? 2 : 0;
--}				/* rx_complete */
-+
-+	len=urb->actual_length;
-+	buf=fifo->buffer;
-+
-+	if(fifo->last_urblen!=fifo->usb_packet_maxlen) {
-+		// the threshold mask is in the 2nd status byte
-+		hfc->threshold_mask=buf[1];
-+		// the S0 state is in the upper half of the 1st status byte
-+		state_handler(hfc,buf[0] >> 4);
-+		// if we have more than the 2 status bytes -> collect data
-+		if(len>2) collect_rx_frame(fifo,buf+2,urb->actual_length-2,buf[0]&1);
-+	} else
-+		collect_rx_frame(fifo,buf,urb->actual_length,0);
-+
-+	fifo->last_urblen=urb->actual_length;
-+
-+
-+}	/* rx_complete */
-+
-+
- 
- /***************************************************/
- /* start the interrupt transfer for the given fifo */
- /***************************************************/
--static void
--start_rx_fifo(usb_fifo * fifo)
-+static void start_int_fifo(usb_fifo * fifo)
- {
--	if (fifo->buff)
--		return;		/* still active */
--	if (!
--	    (fifo->buff =
--	     dev_alloc_skb(fifo->max_size + (fifo->transmode ? 0 : 3))))
--		return;
--	fifo->act_ptr = fifo->buff->data;
--	FILL_INT_URB(&fifo->urb, fifo->hfc->dev, fifo->pipe, fifo->buffer,
--		     fifo->usb_maxlen, rx_complete, fifo, fifo->intervall);
--	fifo->next_complete = 0;
--	fifo->rx_offset = 2;
--	fifo->active = 1;	/* must be marked active */
--	fifo->hfc->active_fifos |= fifo->fifo_mask;
--	if (usb_submit_urb(&fifo->urb)) {
-+	int errcode;
-+
-+#ifdef VERBOSE_USB_DEBUG
-+	printk(KERN_INFO "HFC-USB: starting intr IN fifo:%d\n", fifo->fifonum);
-+#endif
-+	if (!fifo->urb) {
-+		fifo->urb = usb_alloc_urb(0);
-+		if (!fifo->urb)
-+			return;
-+	}
-+	usb_fill_int_urb(fifo->urb, fifo->hfc->dev, fifo->pipe, fifo->buffer,
-+				 fifo->usb_packet_maxlen, rx_complete, fifo, fifo->intervall);
-+	fifo->active = 1;		/* must be marked active */
-+	errcode = usb_submit_urb(fifo->urb);
-+
-+	if(errcode)
-+	{
-+		printk(KERN_INFO "HFC-USB: submit URB error(start_int_info): status:%i\n",   errcode);
- 		fifo->active = 0;
--		fifo->hfc->active_fifos &= ~fifo->fifo_mask;
--		dev_kfree_skb_any(fifo->buff);
--		fifo->buff = NULL;
-+		fifo->skbuff = NULL;
- 	}
--}				/* start_rx_fifo */
-+} /* start_int_fifo */
- 
--/***************************************************************/
--/* control completion routine handling background control cmds */
--/***************************************************************/
--static void
--ctrl_complete(purb_t urb)
-+/*****************************/
-+/* set the B-channel mode    */
-+/*****************************/
-+static void set_hfcmode(hfcusb_data *hfc,int channel,int mode)
- {
--	hfcusb_data *hfc = (hfcusb_data *) urb->context;
-+	__u8 val,idx_table[2]={0,2};
- 
--	urb->dev = hfc->dev;
--	if (hfc->ctrl_cnt) {
--		switch (hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg) {
--			case HFCUSB_FIFO:
--				hfc->ctrl_fifo =
--				    hfc->ctrl_buff[hfc->ctrl_out_idx].
--				    reg_val;
--				break;
--			case HFCUSB_F_USAGE:
--				if (!hfc->dfifo_fill) {
--					fill_tx_urb(hfc->fifos +
--						    HFCUSB_D_TX);
--					if (hfc->fifos[HFCUSB_D_TX].buff)
--						usb_submit_urb(&hfc->
--							       fifos
--							       [HFCUSB_D_TX].
--							       urb);
--				} else {
--					queue_control_request(hfc,
--							      HFCUSB_FIFO,
--							      HFCUSB_D_TX);
--					queue_control_request(hfc,
--							      HFCUSB_F_USAGE,
--							      0);
--				}
--				break;
--			case HFCUSB_SCTRL_R:
--				switch (hfc->ctrl_fifo) {
--					case HFCUSB_B1_RX:
--						if (hfc->bch_enables & 1)
--							start_rx_fifo(hfc->
--								      fifos
--								      +
--								      HFCUSB_B1_RX);
--						break;
--					case HFCUSB_B2_RX:
--						if (hfc->bch_enables & 2)
--							start_rx_fifo(hfc->
--								      fifos
--								      +
--								      HFCUSB_B2_RX);
--						break;
--				}
--				if (hfc->bch_enables & 3)
--				    hfc->led_req |= LED_BCH;
--				else
--				    hfc->led_req &= ~LED_BCH;
--				break;
--			case HFCUSB_P_DATA:
--				hfc->led_act =
--				    hfc->ctrl_buff[hfc->ctrl_out_idx].
--				    reg_val;
--				break;
--		}
--		hfc->ctrl_cnt--;	/* decrement actual count */
--		if (++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE)
--			hfc->ctrl_out_idx = 0;	/* pointer wrap */
--		ctrl_start_transfer(hfc);	/* start next transfer */
-+#ifdef VERBOSE_ISDN_DEBUG
-+  printk (KERN_INFO "HFC-USB: setting channel %d to mode %d\n",channel,mode);
-+#endif
-+
-+	hfc->b_mode[channel]=mode;
-+
-+	// setup CON_HDLC
-+	val=0;
-+	if(mode!=L1_MODE_NULL) val=8;    // enable fifo?
-+	if(mode==L1_MODE_TRANS) val|=2;  // set transparent bit
-+
-+	queue_control_request(hfc,HFCUSB_FIFO,idx_table[channel],1); // set FIFO to transmit register
-+	queue_control_request(hfc,HFCUSB_CON_HDLC,val,1);
-+	queue_control_request(hfc,HFCUSB_INC_RES_F,2,1); // reset fifo
-+
-+	queue_control_request(hfc,HFCUSB_FIFO,idx_table[channel]+1,1); // set FIFO to receive register
-+	queue_control_request(hfc,HFCUSB_CON_HDLC,val,1);
-+	queue_control_request(hfc,HFCUSB_INC_RES_F,2,1);  // reset fifo
-+
-+	val=0x40;
-+	if(hfc->b_mode[0]) val|=1;
-+	if(hfc->b_mode[1]) val|=2;
-+	queue_control_request(hfc,HFCUSB_SCTRL,val,1);
-+
-+	val=0;
-+	if(hfc->b_mode[0]) val|=1;
-+	if(hfc->b_mode[1]) val|=2;
-+	queue_control_request(hfc,HFCUSB_SCTRL_R,val,1);
-+
-+	if(mode==L1_MODE_NULL)
-+	{
-+		if(channel) handle_led(hfc,LED_B2_OFF);
-+		else handle_led(hfc,LED_B1_OFF);
- 	}
--}				/* ctrl_complete */
-+	else
-+	{
-+		if(channel) handle_led(hfc,LED_B2_ON);
-+		else handle_led(hfc,LED_B1_ON);
-+	}
-+}
- 
--/*****************************************/
--/* Layer 1 + D channel access from HiSax */
--/*****************************************/
--static void
--hfcusb_l1_access(void *drvarg, int pr, void *arg)
--{
--	hfcusb_data *hfc = (hfcusb_data *) drvarg;
--
--	switch (pr) {
--		case (PH_DATA | REQUEST):
--		case (PH_PULL | INDICATION):
--			skb_queue_tail(hfc->regd.dsq,
--				       (struct sk_buff *) arg);
--			if (!hfc->fifos[HFCUSB_D_TX].active
--			    && !hfc->dfifo_fill) {
--				fill_tx_urb(hfc->fifos + HFCUSB_D_TX);
--				hfc->active_fifos |=
--				    hfc->fifos[HFCUSB_D_TX].fifo_mask;
--				usb_submit_urb(&hfc->fifos[HFCUSB_D_TX].
--					       urb);
--			}
--			break;
--		case (PH_ACTIVATE | REQUEST):
--		    switch (hfc->l1_state) {
--			case 6:
--			case 8:
--				hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
--						   (PH_DEACTIVATE |
--						   INDICATION), NULL);
-+/*
-+   --------------------------------------------------------------------------------------
-+   from here : hisax_if callback routines :
-+     - void hfc_usb_d_l2l1(struct hisax_if *hisax_d_if, int pr, void *arg) {
- 
--				break;
--			case 7:
--				hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
--						   (PH_ACTIVATE |
--						   INDICATION), NULL);
-+   l1 to l2 routines :
-+     - static void hfc_usb_l1l2(hfcusb_data * hfc)
- 
--				break;
--			default:
--				queue_control_request(hfc, HFCUSB_STATES, 0x60);	/* start activation */
--				hfc->t3_timer.expires =
--				    jiffies + (HFC_TIMER_T3 * HZ) / 1000;
--				if (!timer_pending(&hfc->t3_timer))
--					add_timer(&hfc->t3_timer);
--				break;
--		    }
--		    break;
-+*/
- 
--		case (PH_DEACTIVATE | REQUEST):
--			queue_control_request(hfc, HFCUSB_STATES, 0x40);	/* start deactivation */
--			break;
--		default:
--			printk(KERN_INFO "unknown hfcusb l1_access 0x%x\n",
--			       pr);
--			break;
--	}
--}				/* hfcusb_l1_access */
--
--/*******************************/
--/* B channel access from HiSax */
--/*******************************/
--static void
--hfcusb_bch_access(void *drvarg, int chan, int pr, void *arg)
--{
--	hfcusb_data *hfc = (hfcusb_data *) drvarg;
--	usb_fifo *fifo = hfc->fifos + (chan ? HFCUSB_B2_TX : HFCUSB_B1_TX);
--	long flags;
--
--	switch (pr) {
--		case (PH_DATA | REQUEST):
--		case (PH_PULL | INDICATION):
--			save_flags(flags);
--			cli();
--			if (!fifo->active) {
--				fill_tx_urb(fifo);
--				hfc->active_fifos |= fifo->fifo_mask;
--				usb_submit_urb(&fifo->urb);
--			}
--			restore_flags(flags);
--			break;
--		case (PH_ACTIVATE | REQUEST):
--			if (!((int) arg)) {
--				hfc->bch_enables &= ~(1 << chan);
--				if (fifo->active) {
--					fifo->active = 0;
--					usb_unlink_urb(&fifo->urb);
-+void hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg)
-+{
-+    usb_fifo *fifo = my_hisax_if->priv;
-+	hfcusb_data *hfc = fifo->hfc;
-+
-+    switch (pr) {
-+		case PH_ACTIVATE | REQUEST:
-+				if(fifo->fifonum==HFCUSB_D_TX)
-+				{
-+#ifdef VERBOSE_ISDN_DEBUG
-+					printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_ACTIVATE | REQUEST\n");
-+#endif
-+					queue_control_request(hfc, HFCUSB_STATES,0x60,1);	/* make activation */
-+					hfc->t3_timer.expires = jiffies + (HFC_TIMER_T3 * HZ) / 1000;
-+					if(!timer_pending(&hfc->t3_timer)) add_timer(&hfc->t3_timer);
- 				}
--				save_flags(flags);
--				cli();
--				queue_control_request(hfc, HFCUSB_FIFO,
--						      fifo->fifonum);
--				queue_control_request(hfc,
--						      HFCUSB_INC_RES_F, 2);
--				queue_control_request(hfc, HFCUSB_CON_HDLC,
--						      9);
--				queue_control_request(hfc, HFCUSB_SCTRL,
--						      0x40 +
--						      hfc->bch_enables);
--				queue_control_request(hfc, HFCUSB_SCTRL_R,
--						      hfc->bch_enables);
--				restore_flags(flags);
--				fifo++;
--				if (fifo->active) {
--					fifo->active = 0;
--					usb_unlink_urb(&fifo->urb);
-+				else
-+				{
-+#ifdef VERBOSE_ISDN_DEBUG
-+					printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_ACTIVATE | REQUEST\n");
-+#endif
-+					set_hfcmode(hfc,(fifo->fifonum==HFCUSB_B1_TX) ? 0 : 1 ,(int)arg);
-+					fifo->hif->l1l2(fifo->hif,PH_ACTIVATE | INDICATION, NULL);
- 				}
--				return;	/* fifo deactivated */
--			}
--			fifo->transmode = ((int) arg == L1_MODE_TRANS);
--			fifo->max_size =
--			    ((fifo->transmode) ? fifo->
--			     usb_maxlen : MAX_BCH_SIZE);
--			(fifo + 1)->transmode = fifo->transmode;
--			(fifo + 1)->max_size = fifo->max_size;
--			hfc->bch_enables |= (1 << chan);
--			save_flags(flags);
--			cli();
--			queue_control_request(hfc, HFCUSB_FIFO,
--					      fifo->fifonum);
--			queue_control_request(hfc, HFCUSB_CON_HDLC,
--					      ((!fifo->
--						transmode) ? 9 : 11));
--			queue_control_request(hfc, HFCUSB_INC_RES_F, 2);
--			queue_control_request(hfc, HFCUSB_SCTRL,
--					      0x40 + hfc->bch_enables);
--			if ((int) arg == L1_MODE_HDLC)
--				queue_control_request(hfc, HFCUSB_CON_HDLC,
--						      8);
--			queue_control_request(hfc, HFCUSB_FIFO,
--					      fifo->fifonum + 1);
--			queue_control_request(hfc, HFCUSB_CON_HDLC,
--					      ((!fifo->
--						transmode) ? 8 : 10));
--			queue_control_request(hfc, HFCUSB_INC_RES_F, 2);
--			queue_control_request(hfc, HFCUSB_SCTRL_R,
--					      hfc->bch_enables);
--			restore_flags(flags);
--
--			break;
--
--		default:
--			printk(KERN_INFO
--			       "unknown hfcusb bch_access chan %d 0x%x\n",
--			       chan, pr);
--			break;
--	}
--}				/* hfcusb_bch_access */
-+                break;
-+        case PH_DEACTIVATE | REQUEST:
-+				if(fifo->fifonum==HFCUSB_D_TX)
-+				{
-+#ifdef VERBOSE_ISDN_DEBUG
-+					printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_DEACTIVATE | REQUEST\n");
-+#endif
-+					printk (KERN_INFO "HFC-USB: ISDN TE device should not deativate...\n");
-+				}
-+				else
-+				{
-+#ifdef VERBOSE_ISDN_DEBUG
-+					printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_DEACTIVATE | REQUEST\n");
-+#endif
-+					set_hfcmode(hfc,(fifo->fifonum==HFCUSB_B1_TX) ? 0 : 1 ,(int)L1_MODE_NULL);
-+					fifo->hif->l1l2(fifo->hif,PH_DEACTIVATE | INDICATION, NULL);
-+				}
-+                break;
-+		case PH_DATA | REQUEST:
-+				if(fifo->skbuff && fifo->delete_flg)
-+				{
-+					dev_kfree_skb_any(fifo->skbuff);
-+					//printk(KERN_INFO "skbuff=NULL on fifo:%d\n",fifo->fifonum);
-+					fifo->skbuff = NULL;
-+					fifo->delete_flg=FALSE;
-+				}
-+
-+				fifo->skbuff=arg; // we have a new buffer
-+
-+				//if(fifo->fifonum==HFCUSB_D_TX) printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_DATA | REQUEST\n");
-+				//else printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_DATA | REQUEST\n");
-+                break;
-+        default:
-+                printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x\n", pr);
-+                break;
-+    }
-+}
-+
-+// valid configurations
-+#define CNF_4INT3ISO  1      // 4 INT IN, 3 ISO OUT
-+#define CNF_3INT3ISO  2      // 3 INT IN, 3 ISO OUT
-+#define CNF_4ISO3ISO  3      // 4 ISO IN, 3 ISO OUT
-+#define CNF_3ISO3ISO  4 	 // 3 ISO IN, 3 ISO OUT
-+
-+
-+/*
-+   --------------------------------------------------------------------------------------
-+   From here on USB initialization and deactivation related routines are implemented :
-+
-+   - hfc_usb_init :
-+      is the main Entry Point for the USB Subsystem when the device get plugged
-+      in. This function calls usb_register with usb_driver as parameter.
-+      Here, further entry points for probing (hfc_usb_probe) and disconnecting
-+      the device (hfc_usb_disconnect) are published, as the id_table
-+
-+   - hfc_usb_probe
-+      this function is called by the usb subsystem, and steps through the alternate
-+      settings of the currently plugged in device to detect all Endpoints needed to
-+      run an ISDN TA.
-+      Needed EndPoints are
-+      3 (+1) IntIn EndPoints   (D-in,  E-in, B1-in, B2-in, (E-in)) or
-+      3 (+1) Isochron In Endpoints (D-out, B1-out, B2-out) and 3 IsoOut Endpoints
-+      The currently used transfer mode of on the Out-Endpoints will be stored in
-+      hfc->usb_transfer_mode and is either USB_INT or USB_ISO
-+      When a valid alternate setting could be found, the usb_init (see blow)
-+      function is called
-+
-+   - usb_init
-+      Here, the HFC_USB Chip itself gets initialized and the USB framework to send/receive
-+      Data to/from the several EndPoints are initialized:
-+       The E- and D-Channel Int-In chain gets started
-+       The IsoChain for the Iso-Out traffic get started
-+
-+   - hfc_usb_disconnect
-+      this function is called by the usb subsystem and has to free all resources
-+      and stop all usb traffic to allow a proper hotplugging disconnect.
-+
-+*/
- 
- /***************************************************************************/
- /* usb_init is called once when a new matching device is detected to setup */
--/* main parmeters. It registers the driver at the main hisax module.       */
-+/* main parameters. It registers the driver at the main hisax module.       */
- /* on success 0 is returned.                                               */
- /***************************************************************************/
--static int
--usb_init(hfcusb_data * hfc)
-+static int usb_init(hfcusb_data * hfc)
- {
- 	usb_fifo *fifo;
--	int i;
-+	int i, err;
- 	u_char b;
--
-+	struct hisax_b_if *p_b_if[2];
-+	
- 	/* check the chip id */
--	if ((Read_hfc(hfc, HFCUSB_CHIP_ID, &b) != 1) ||
--	    (b != HFCUSB_CHIPID)) {
-+	printk(KERN_INFO "HFCUSB_CHIP_ID begin\n");
-+	if (read_usb(hfc, HFCUSB_CHIP_ID, &b) != 1) {
-+		printk(KERN_INFO "HFC-USB: cannot read chip id\n");
-+		return(1); 
-+	}
-+	printk(KERN_INFO "HFCUSB_CHIP_ID %x\n", b);
-+	if (b != HFCUSB_CHIPID) {
- 		printk(KERN_INFO "HFC-USB: Invalid chip id 0x%02x\n", b);
--		return (1);
-+		return(1);
- 	}
- 
- 	/* first set the needed config, interface and alternate */
--	usb_set_configuration(hfc->dev, 1);
--	usb_set_interface(hfc->dev, hfc->if_used, hfc->alt_used);
-+	printk(KERN_INFO "usb_init 1\n");
-+//	usb_set_configuration(hfc->dev, 1);
-+	printk(KERN_INFO "usb_init 2\n");
-+	err = usb_set_interface(hfc->dev, hfc->if_used, hfc->alt_used);
-+	printk(KERN_INFO "usb_init usb_set_interface return %d\n", err);
-+	/* now we initialize the chip */
-+	write_usb(hfc, HFCUSB_CIRM, 8);	    // do reset
-+	write_usb(hfc, HFCUSB_CIRM, 0x10);	// aux = output, reset off
- 
--        /* init the led state request */
--	hfc->led_req = LED_DRIVER;
-+	// set USB_SIZE to match the the wMaxPacketSize for INT or BULK transfers
-+	write_usb(hfc, HFCUSB_USB_SIZE,(hfc->packet_size/8) | ((hfc->packet_size/8) << 4));
- 
--	/* now we initialise the chip */
--	Write_hfc(hfc, HFCUSB_CIRM, 0x10);	/* aux = output, reset off */
--	Write_hfc(hfc, HFCUSB_P_DATA, 0);       /* leds = off */
--	Write_hfc(hfc, HFCUSB_USB_SIZE,
--		  (hfc->fifos[HFCUSB_B1_TX].usb_maxlen >> 3) |
--		  ((hfc->fifos[HFCUSB_B1_RX].usb_maxlen >> 3) << 4));
-+	// set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers
-+	write_usb(hfc, HFCUSB_USB_SIZE_I, hfc->iso_packet_size);
- 
- 	/* enable PCM/GCI master mode */
--	Write_hfc(hfc, HFCUSB_MST_MODE1, 0);	/* set default values */
--	Write_hfc(hfc, HFCUSB_MST_MODE0, 1);	/* enable master mode */
-+	write_usb(hfc, HFCUSB_MST_MODE1, 0);	/* set default values */
-+	write_usb(hfc, HFCUSB_MST_MODE0, 1);	/* enable master mode */
- 
- 	/* init the fifos */
--	Write_hfc(hfc, HFCUSB_F_THRES, (HFCUSB_TX_THRESHOLD >> 3) |
--		  ((HFCUSB_RX_THRESHOLD >> 3) << 4));
-+	write_usb(hfc, HFCUSB_F_THRES, (HFCUSB_TX_THRESHOLD/8) |((HFCUSB_RX_THRESHOLD/8) << 4));
- 
--	for (i = 0, fifo = hfc->fifos + i; i < HFCUSB_NUM_FIFOS;
--	     i++, fifo++) {
--		Write_hfc(hfc, HFCUSB_FIFO, i);	/* select the desired fifo */
--
--		fifo->transmode = 0;	/* hdlc mode selected */
--		fifo->buff = NULL;	/* init buffer pointer */
--		fifo->max_size =
--		    (i <= HFCUSB_B2_RX) ? MAX_BCH_SIZE : MAX_DFRAME_LEN;
--		Write_hfc(hfc, HFCUSB_HDLC_PAR, ((i <= HFCUSB_B2_RX) ? 0 : 2));	/* data length */
--		Write_hfc(hfc, HFCUSB_CON_HDLC, ((i & 1) ? 0x08 : 0x09));	/* rx hdlc, tx fill 1 */
--		Write_hfc(hfc, HFCUSB_INC_RES_F, 2);	/* reset the fifo */
--	}
--
--	Write_hfc(hfc, HFCUSB_CLKDEL, 0x0f);	/* clock delay value */
--	Write_hfc(hfc, HFCUSB_STATES, 3 | 0x10);	/* set deactivated mode */
--	Write_hfc(hfc, HFCUSB_STATES, 3);	/* enable state machine */
-+	fifo = hfc->fifos;
-+	for(i = 0; i < HFCUSB_NUM_FIFOS; i++)
-+	{
-+		write_usb(hfc, HFCUSB_FIFO, i);	/* select the desired fifo */
-+		fifo[i].skbuff = NULL;	/* init buffer pointer */
-+		fifo[i].max_size = (i <= HFCUSB_B2_RX) ? MAX_BCH_SIZE : MAX_DFRAME_LEN;
-+		fifo[i].last_urblen=0;
-+		write_usb(hfc, HFCUSB_HDLC_PAR, ((i <= HFCUSB_B2_RX) ? 0 : 2));	    // set 2 bit for D- & E-channel
-+		write_usb(hfc, HFCUSB_CON_HDLC, ((i==HFCUSB_D_TX) ? 0x09 : 0x08));	// rx hdlc, enable IFF for D-channel
-+		write_usb(hfc, HFCUSB_INC_RES_F, 2);	/* reset the fifo */
-+	}
- 
--	Write_hfc(hfc, HFCUSB_SCTRL_R, 0);	/* disable both B receivers */
--	Write_hfc(hfc, HFCUSB_SCTRL, 0x40);	/* disable B transmitters + cap mode */
-+	write_usb(hfc, HFCUSB_CLKDEL, 0x0f);	 /* clock delay value */
-+	write_usb(hfc, HFCUSB_STATES, 3 | 0x10); /* set deactivated mode */
-+	write_usb(hfc, HFCUSB_STATES, 3);	     /* enable state machine */
-+
-+	write_usb(hfc, HFCUSB_SCTRL_R, 0);	     /* disable both B receivers */
-+	write_usb(hfc, HFCUSB_SCTRL, 0x40);	     /* disable B transmitters + capacitive mode */
-+
-+	// set both B-channel to not connected
-+	hfc->b_mode[0]=L1_MODE_NULL;
-+	hfc->b_mode[1]=L1_MODE_NULL;
-+
-+	hfc->l1_activated=FALSE;
-+	hfc->led_state=0;
-+	hfc->led_new_data=0;
- 
--	/* init the l1 timer */
-+	/* init the t3 timer */
- 	init_timer(&hfc->t3_timer);
- 	hfc->t3_timer.data = (long) hfc;
--	hfc->t3_timer.function = (void *) l1_timer_expire;
-+	hfc->t3_timer.function = (void *) l1_timer_expire_t3;
-+	/* init the t4 timer */
-+	init_timer(&hfc->t4_timer);
- 	hfc->t4_timer.data = (long) hfc;
--	hfc->t4_timer.function = (void *) l1_timer_expire;
--	hfc->l1_tq.routine = (void *) (void *) usb_l1d_bh;
--	hfc->l1_tq.sync = 0;
--	hfc->l1_tq.data = hfc;
--
--	/* init the background control machinery */
--	hfc->ctrl_read.requesttype = 0xc0;
--	hfc->ctrl_read.request = 1;
--	hfc->ctrl_read.length = 1;
--	hfc->ctrl_write.requesttype = 0x40;
--	hfc->ctrl_write.request = 0;
--	hfc->ctrl_write.length = 0;
--	FILL_CONTROL_URB(&hfc->ctrl_urb, hfc->dev, hfc->ctrl_out_pipe,
--			 (u_char *) & hfc->ctrl_write, NULL, 0,
--			 ctrl_complete, hfc);
--
--	/* init the TX-urbs */
--	fifo = hfc->fifos + HFCUSB_D_TX;
--	FILL_BULK_URB(&fifo->urb, hfc->dev, fifo->pipe,
--		      (u_char *) fifo->buffer, 0, tx_complete, fifo);
--	fifo = hfc->fifos + HFCUSB_B1_TX;
--	FILL_BULK_URB(&fifo->urb, hfc->dev, fifo->pipe,
--		      (u_char *) fifo->buffer, 0, tx_complete, fifo);
--	fifo = hfc->fifos + HFCUSB_B2_TX;
--	FILL_BULK_URB(&fifo->urb, hfc->dev, fifo->pipe,
--		      (u_char *) fifo->buffer, 0, tx_complete, fifo);
--
--	/* init the E-buffer */
--	skb_queue_head_init(&hfc->regd.erq);
--
--	/* now register ourself at hisax */
--	hfc->regd.version = HISAX_LOAD_VERSION;	/* set our version */
--	hfc->regd.cmd = HISAX_LOAD_REGISTER;	/* register command */
--	hfc->regd.argl1 = (void *) hfc;	/* argument for our local routine */
--	hfc->regd.dch_l2l1 = hfcusb_l1_access;
--	hfc->regd.bch_l2l1 = hfcusb_bch_access;
--	hfc->regd.drvname = "hfc_usb";
--	if (hisax_register_hfcusb(&hfc->regd)) {
--		printk(KERN_INFO "HFC-USB failed to register at hisax\n");
--		Write_hfc(hfc, HFCUSB_CIRM, 0x08);	/* aux = input, reset on */
--		return (1);
--	}
--
--	/* startup the D- and E-channel fifos */
--	start_rx_fifo(hfc->fifos + HFCUSB_D_RX);	/* D-fifo */
--	if (hfc->fifos[HFCUSB_PCM_RX].pipe)
--		start_rx_fifo(hfc->fifos + HFCUSB_PCM_RX);	/* E-fifo */
-+	hfc->t4_timer.function = (void *) l1_timer_expire_t4;
-+	/* init the led timer */
-+	init_timer(&hfc->led_timer);
-+	hfc->led_timer.data = (long) hfc;
-+	hfc->led_timer.function = (void *) led_timer;
-+	// trigger 4 hz led timer
-+	hfc->led_timer.expires = jiffies + (LED_TIME * HZ) / 1000;
-+	if(!timer_pending(&hfc->led_timer)) add_timer(&hfc->led_timer);
-+
-+	// init the background machinery for control requests
-+	hfc->ctrl_read.bRequestType = 0xc0;
-+	hfc->ctrl_read.bRequest = 1;
-+	hfc->ctrl_read.wLength = 1;
-+	hfc->ctrl_write.bRequestType = 0x40;
-+	hfc->ctrl_write.bRequest = 0;
-+	hfc->ctrl_write.wLength = 0;
-+	usb_fill_control_urb(hfc->ctrl_urb, hfc->dev, hfc->ctrl_out_pipe,(u_char *) & hfc->ctrl_write, NULL, 0, ctrl_complete, hfc);
-+					
-+	/* Init All Fifos */
-+	for(i = 0; i < HFCUSB_NUM_FIFOS; i++)
-+	{
-+		hfc->fifos[i].iso[0].purb = NULL;
-+		hfc->fifos[i].iso[1].purb = NULL;
-+		hfc->fifos[i].active = 0;
-+	}
-+
-+	// register like Germaschewski :
-+	hfc->d_if.owner = THIS_MODULE;
-+	hfc->d_if.ifc.priv = &hfc->fifos[HFCUSB_D_TX];
-+	hfc->d_if.ifc.l2l1 = hfc_usb_l2l1;
-+
-+	for (i=0; i<2; i++)
-+	{
-+		hfc->b_if[i].ifc.priv = &hfc->fifos[HFCUSB_B1_TX+i*2];
-+		hfc->b_if[i].ifc.l2l1 = hfc_usb_l2l1;
-+		p_b_if[i] = &hfc->b_if[i];
-+	}
-+	
-+	hfc->protocol = 2;  /* default EURO ISDN, should be a module_param */
-+	hisax_register(&hfc->d_if, p_b_if, "hfc_usb", hfc->protocol);
-+	
-+	for (i=0; i<4; i++)
-+		hfc->fifos[i].hif=&p_b_if[i/2]->ifc;
-+	for (i=4; i<8; i++)
-+		hfc->fifos[i].hif=&hfc->d_if.ifc;
-+
-+	// 3 (+1) INT IN + 3 ISO OUT
-+	if(hfc->cfg_used == CNF_3INT3ISO || hfc->cfg_used == CNF_4INT3ISO)
-+	{
-+		start_int_fifo(hfc->fifos + HFCUSB_D_RX);	// Int IN D-fifo
-+		if(hfc->fifos[HFCUSB_PCM_RX].pipe) start_int_fifo(hfc->fifos + HFCUSB_PCM_RX);	// E-fifo
-+		start_int_fifo(hfc->fifos + HFCUSB_B1_RX);	// Int IN B1-fifo
-+		start_int_fifo(hfc->fifos + HFCUSB_B2_RX);	// Int IN B2-fifo
-+	}
-+
-+	// 3 (+1) ISO IN + 3 ISO OUT
-+	if(hfc->cfg_used==CNF_3ISO3ISO || hfc->cfg_used==CNF_4ISO3ISO)
-+	{
-+		start_isoc_chain(hfc->fifos + HFCUSB_D_RX, ISOC_PACKETS_D, rx_iso_complete,16);
-+		if(hfc->fifos[HFCUSB_PCM_RX].pipe) start_isoc_chain(hfc->fifos + HFCUSB_PCM_RX, ISOC_PACKETS_D, rx_iso_complete,16);
-+		start_isoc_chain(hfc->fifos + HFCUSB_B1_RX, ISOC_PACKETS_B, rx_iso_complete,16);
-+		start_isoc_chain(hfc->fifos + HFCUSB_B2_RX, ISOC_PACKETS_B, rx_iso_complete,16);
-+	}
-+
-+	start_isoc_chain(hfc->fifos + HFCUSB_D_TX, ISOC_PACKETS_D, tx_iso_complete,1);
-+	start_isoc_chain(hfc->fifos + HFCUSB_B1_TX, ISOC_PACKETS_B, tx_iso_complete,1);
-+	start_isoc_chain(hfc->fifos + HFCUSB_B2_TX, ISOC_PACKETS_B, tx_iso_complete,1);
-+
-+	handle_led(hfc,LED_POWER_ON);
-+
-+	return(0);
-+}	/* usb_init */
-+
-+
-+/****************************************/
-+/* data defining the devices to be used */
-+/****************************************/
-+// static __devinitdata const struct usb_device_id hfc_usb_idtab[3] = {
-+static struct usb_device_id hfc_usb_idtab[] = {
-+	{USB_DEVICE(0x7b0, 0x0007)},	/* Billion USB TA 2 */
-+	{USB_DEVICE(0x742, 0x2008)},	/* Stollmann USB TA */
-+	{USB_DEVICE(0x959, 0x2bd0)},	/* Colognechip USB eval TA */
-+	{USB_DEVICE(0x8e3, 0x0301)},	/* OliTec ISDN USB */
-+	{USB_DEVICE(0x675, 0x1688)},	/* DrayTec ISDN USB */
-+	{USB_DEVICE(0x7fa, 0x0846)},    /* Bewan ISDN USB TA */
-+	{}				/* end with an all-zeroes entry */
-+};
-+
-+MODULE_AUTHOR("Peter Sprenger (sprenger@moving-byters.de)/Martin Bachem (info@colognechip.com)");
-+MODULE_DESCRIPTION("HFC I4L USB driver");
-+MODULE_DEVICE_TABLE(usb, hfc_usb_idtab);
-+MODULE_LICENSE("GPL");
-+
-+#define EP_NUL 1    // Endpoint at this position not allowed
-+#define EP_NOP 2	// all type of endpoints allowed at this position
-+#define EP_ISO 3	// Isochron endpoint mandatory at this position
-+#define EP_BLK 4	// Bulk endpoint mandatory at this position
-+#define EP_INT 5	// Interrupt endpoint mandatory at this position
-+
-+// this array represents all endpoints possible in the HCF-USB
-+// the last 2 entries are the configuration number and the minimum interval for Interrupt endpoints
-+int validconf[][18]=
-+{
-+	// INT in, ISO out config
-+	{EP_NUL,EP_INT,EP_NUL,EP_INT,EP_NUL,EP_INT,EP_NOP,EP_INT,EP_ISO,EP_NUL,EP_ISO,EP_NUL,EP_ISO,EP_NUL,EP_NUL,EP_NUL,CNF_4INT3ISO,2},
-+	{EP_NUL,EP_INT,EP_NUL,EP_INT,EP_NUL,EP_INT,EP_NUL,EP_NUL,EP_ISO,EP_NUL,EP_ISO,EP_NUL,EP_ISO,EP_NUL,EP_NUL,EP_NUL,CNF_3INT3ISO,2},
-+	// ISO in, ISO out config
-+	{EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_NOP,EP_ISO,CNF_4ISO3ISO,2},
-+	{EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_NUL,EP_NUL,CNF_3ISO3ISO,2},
-+	{0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}       // EOL element
-+};
-+
-+// string description of chosen config
-+char *conf_str[]=
-+{
-+	"4 Interrupt IN + 3 Isochron OUT",
-+	"3 Interrupt IN + 3 Isochron OUT",
-+	"4 Isochron IN + 3 Isochron OUT",
-+	"3 Isochron IN + 3 Isochron OUT"
-+};
- 
--	return (0);
--}				/* usb_init */
- 
- /*************************************************/
- /* function called to probe a new plugged device */
- /*************************************************/
--static void *
--hfc_usb_probe(struct usb_device *dev, unsigned int interface
--#ifdef COMPAT_HAS_USB_IDTAB
--	      , const struct usb_device_id *id_table)
--#else
--    )
--#endif
-+//static int hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
-+static void* hfc_usb_probe(struct usb_device *dev, unsigned int ifnum, const struct usb_device_id *id)
- {
-+        //struct usb_device *dev= interface_to_usbdev(intf);
-+	struct usb_interface* intf = dev->actconfig->interface + ifnum;
- 	hfcusb_data *context;
--	struct usb_interface *ifp = dev->actconfig->interface + interface;
--	struct usb_interface_descriptor *ifdp =
--	    ifp->altsetting + ifp->act_altsetting;
--	struct usb_endpoint_descriptor *epd;
--	int i, idx, ep_msk;
--
--#ifdef COMPAT_HAS_USB_IDTAB
--	if (id_table && (dev->descriptor.idVendor == id_table->idVendor) &&
--	    (dev->descriptor.idProduct == id_table->idProduct) &&
--#else
--	if ((((dev->descriptor.idVendor == 0x959) &&
--	    (dev->descriptor.idProduct == 0x2bd0)) ||
--	    ((dev->descriptor.idVendor == 0x7b0) &&
--	    (dev->descriptor.idProduct == 0x0006))) &&
--#endif
--	    (ifdp->bNumEndpoints >= 6) && (ifdp->bNumEndpoints <= 16)) {
--		if (!(context = kmalloc(sizeof(hfcusb_data), GFP_KERNEL))) {
--			return (NULL);	/* got no mem */
--		};
--		memset(context, 0, sizeof(hfcusb_data));	/* clear the structure */
--		i = ifdp->bNumEndpoints;	/* get number of endpoints */
--		ep_msk = 0;	/* none found */
--		epd = ifdp->endpoint;	/* first endpoint descriptor */
--		while (i-- && ((ep_msk & 0xcf) != 0xcf)) {
--
--			idx = (((epd->bEndpointAddress & 0x7f) - 1) << 1);	/* get endpoint base */
--			if (idx < 7) {
--				switch (epd->bmAttributes) {
--					case USB_ENDPOINT_XFER_INT:
--						if (!
--						    (epd->
--						     bEndpointAddress &
--						     0x80))
--							break;	/* only interrupt in allowed */
--						idx++;	/* input index is odd */
--						context->fifos[idx].pipe =
--						    usb_rcvintpipe(dev,
--								   epd->
--								   bEndpointAddress);
--						break;
--
--					case USB_ENDPOINT_XFER_BULK:
--						if (epd->
--						    bEndpointAddress &
--						    0x80)
--							break;	/* only bulk out allowed */
--						context->fifos[idx].pipe =
--						    usb_sndbulkpipe(dev,
--								    epd->
--								    bEndpointAddress);
--						break;
--					default:
--						context->fifos[idx].pipe = 0;	/* reset data */
--				}	/* switch attribute */
--
--				if (context->fifos[idx].pipe) {
--					context->fifos[idx].fifonum = idx;
--					context->fifos[idx].fifo_mask =
--					    1 << idx;
--					context->fifos[idx].hfc = context;
--					context->fifos[idx].usb_maxlen =
--					    epd->wMaxPacketSize;
--					context->fifos[idx].intervall =
--					    epd->bInterval;
--					ep_msk |= (1 << idx);
--				} else
--					ep_msk &= ~(1 << idx);
--			}	/* idx < 7 */
--			epd++;
--		}
-+	//struct usb_host_interface *iface = intf->cur_altsetting;
-+	//struct usb_host_interface *iface_used = NULL;
-+	//struct usb_host_endpoint *ep;
-+	struct usb_endpoint_descriptor* ep;
-+	//int ifnum = iface->desc.bInterfaceNumber;
-+	struct usb_interface_descriptor* intfdesc = intf->altsetting + intf->act_altsetting;
-+	struct usb_interface_descriptor* intfdesc_used = NULL;
-+	int i, idx, alt_idx, probe_alt_setting, vend_idx, cfg_used, *vcf, attr, cfg_found, cidx, ep_addr;
-+	int cmptbl[16],small_match,iso_packet_size,packet_size,alt_used=0;
-+
-+//        usb_show_device(dev);
-+//	usb_show_device_descriptor(&dev->descriptor);
-+//	usb_show_interface_descriptor(&iface->desc);
-+	vend_idx=0xffff;
-+	for(i=0;vdata[i].vendor;i++)
-+	{
-+		if(dev->descriptor.idVendor==vdata[i].vendor && dev->descriptor.idProduct==vdata[i].prod_id) vend_idx=i;
-+	}
-+	
- 
--		if ((ep_msk & 0x3f) != 0x3f) {
--			kfree(context);
--			return (NULL);
--		}
--		MOD_INC_USE_COUNT;	/* lock our module */
--		context->dev = dev;	/* save device */
--		context->if_used = interface;	/* save used interface */
--		context->alt_used = ifp->act_altsetting;	/* and alternate config */
--		context->ctrl_paksize = dev->descriptor.bMaxPacketSize0;	/* control size */
--
--		/* create the control pipes needed for register access */
--		context->ctrl_in_pipe = usb_rcvctrlpipe(context->dev, 0);
--		context->ctrl_out_pipe = usb_sndctrlpipe(context->dev, 0);
--
--		/* init the chip and register the driver */
--		if (usb_init(context)) {
--			kfree(context);
--			MOD_DEC_USE_COUNT;
--			return (NULL);
--		}
-+#ifdef VERBOSE_USB_DEBUG	
-+	printk(KERN_INFO "HFC-USB: probing interface(%d) actalt(%d)\n",
-+		ifnum, intfdesc->bAlternateSetting); 
-+	/*	printk(KERN_INFO "HFC-USB: probing interface(%d) actalt(%d) minor(%d)\n",
-+		ifnum, intfdesc->bAlternateSetting, intf->driver->minor); */
-+#endif
- 
--		printk(KERN_INFO
--		       "HFC-USB: New device if=%d alt=%d registered\n",
--		       context->if_used, context->alt_used);
--		return (context);
--	}
-+	if (vend_idx != 0xffff) {
-+#ifdef VERBOSE_USB_DEBUG
-+		printk(KERN_INFO "HFC-USB: found vendor idx:%d  name:%s\n",vend_idx,vdata[vend_idx].vend_name);
-+#endif
-+		/* if vendor and product ID is OK, start probing a matching alternate setting ... */
-+		alt_idx = 0;
-+		small_match=0xffff;
-+		// default settings
-+		iso_packet_size=16;
-+		packet_size=64;
-+
-+		while (alt_idx < intf->num_altsetting) {
-+		        //iface = intf->altsetting + alt_idx;
-+			intfdesc = intf->altsetting + alt_idx;
-+			probe_alt_setting = intfdesc->bAlternateSetting;
-+			cfg_used=0;
- 
--	return (NULL);		/* no matching entry */
--}				/* hfc_usb_probe */
-+#ifdef VERBOSE_USB_DEBUG
-+			printk(KERN_INFO "HFC-USB: test alt_setting %d\n", probe_alt_setting);
-+#endif
-+			// check for config EOL element
-+			while (validconf[cfg_used][0]) {
-+				cfg_found=TRUE;
-+				vcf=validconf[cfg_used];
-+				ep = intfdesc->endpoint;	/* first endpoint descriptor */
-+
-+#ifdef VERBOSE_USB_DEBUG
-+				printk(KERN_INFO "HFC-USB: (if=%d alt=%d cfg_used=%d)\n",
-+					ifnum, probe_alt_setting, cfg_used);
-+#endif
-+				// copy table
-+				memcpy(cmptbl,vcf,16*sizeof(int));
-+
-+				// check for all endpoints in this alternate setting
-+				for (i=0; i < intfdesc->bNumEndpoints; i++) {
-+					ep_addr = ep->bEndpointAddress;
-+					idx = ((ep_addr & 0x7f)-1)*2;	/* get endpoint base */
-+					if (ep_addr & 0x80)
-+						idx++;
-+					attr = ep->bmAttributes;
-+
-+					if (cmptbl[idx] == EP_NUL) {
-+						printk(KERN_INFO "HFC-USB: cfg_found=FALSE in idx:%d  attr:%d  cmptbl[%d]:%d\n",
-+							idx, attr, idx, cmptbl[idx]);
-+						cfg_found = FALSE;
-+					}
-+
-+					if (attr == USB_ENDPOINT_XFER_INT && cmptbl[idx] == EP_INT)
-+						cmptbl[idx] = EP_NUL;
-+					if (attr == USB_ENDPOINT_XFER_BULK && cmptbl[idx] == EP_BLK)
-+						cmptbl[idx] = EP_NUL;
-+					if (attr == USB_ENDPOINT_XFER_ISOC && cmptbl[idx] == EP_ISO)
-+						cmptbl[idx] = EP_NUL;
-+
-+					// check if all INT endpoints match minimum interval
-+					if (attr == USB_ENDPOINT_XFER_INT && ep->bInterval < vcf[17]) {
-+#ifdef VERBOSE_USB_DEBUG
-+						if (cfg_found)
-+							printk(KERN_INFO "HFC-USB: Interrupt Endpoint interval < %d found - skipping config\n",
-+								vcf[17]);
-+#endif
-+						cfg_found = FALSE;
-+					}
-+
-+					ep++;
-+				}
-+
-+				for (i = 0; i < 16; i++) {
-+					// printk(KERN_INFO "HFC-USB: cmptbl[%d]:%d\n", i, cmptbl[i]);
-+
-+					// all entries must be EP_NOP or EP_NUL for a valid config
-+					if (cmptbl[i] != EP_NOP && cmptbl[i] != EP_NUL)
-+						cfg_found = FALSE;
-+				}
-+
-+				// we check for smallest match, to provide configuration priority
-+				// configurations with smaller index have higher priority
-+				if (cfg_found) {
-+					if (cfg_used < small_match) {
-+						small_match = cfg_used;
-+						alt_used = probe_alt_setting;
-+						//iface_used = iface;
-+						intfdesc_used = intfdesc;
-+					}
-+#ifdef VERBOSE_USB_DEBUG
-+					printk(KERN_INFO "HFC-USB: small_match=%x %x\n", small_match, alt_used);
-+#endif
-+				}
-+
-+				cfg_used++;
-+			}
-+
-+			alt_idx++;
-+		}		/* (alt_idx < intf->num_altsetting) */
-+#ifdef VERBOSE_USB_DEBUG
-+		printk(KERN_INFO "HFC-USB: final small_match=%x alt_used=%x\n",small_match, alt_used);
-+#endif
-+		// yiipiee, we found a valid config
-+		if (small_match != 0xffff) {
-+		        //iface = iface_used;
-+		        intfdesc = intfdesc_used;
-+
-+			if (!(context = kmalloc(sizeof(hfcusb_data), GFP_KERNEL)))
-+				return(NULL);  /* got no mem */
-+			memset(context, 0, sizeof(hfcusb_data));	/* clear the structure */
-+
-+			ep = intfdesc->endpoint;	/* first endpoint descriptor */
-+			vcf = validconf[small_match];
-+
-+			for (i = 0; i < intfdesc->bNumEndpoints; i++) {
-+				ep_addr = ep->bEndpointAddress;
-+				idx = ((ep_addr & 0x7f)-1)*2;	/* get endpoint base */
-+				if (ep_addr & 0x80)
-+					idx++;
-+				cidx = idx & 7;
-+				attr = ep->bmAttributes;
-+
-+				// only initialize used endpoints
-+				if (vcf[idx] != EP_NOP && vcf[idx] != EP_NUL) {
-+					switch (attr) {
-+						case USB_ENDPOINT_XFER_INT:
-+							context->fifos[cidx].pipe = usb_rcvintpipe(dev, ep->bEndpointAddress);
-+							context->fifos[cidx].usb_transfer_mode = USB_INT;
-+							packet_size = ep->wMaxPacketSize; // remember max packet size
-+#ifdef VERBOSE_USB_DEBUG
-+							printk (KERN_INFO "HFC-USB: Interrupt-In Endpoint found %d ms(idx:%d cidx:%d)!\n",
-+								ep->bInterval, idx, cidx);
-+#endif
-+							break;
-+						case USB_ENDPOINT_XFER_BULK:
-+							if (ep_addr & 0x80)
-+								context->fifos[cidx].pipe = usb_rcvbulkpipe(dev, ep->bEndpointAddress);
-+							else
-+								context->fifos[cidx].pipe = usb_sndbulkpipe(dev, ep->bEndpointAddress);
-+							context->fifos[cidx].usb_transfer_mode = USB_BULK;
-+							packet_size = ep->wMaxPacketSize; // remember max packet size
-+#ifdef VERBOSE_USB_DEBUG
-+							printk (KERN_INFO "HFC-USB: Bulk Endpoint found (idx:%d cidx:%d)!\n",
-+								idx, cidx);
-+#endif
-+							break;
-+						case USB_ENDPOINT_XFER_ISOC:
-+							if (ep_addr & 0x80)
-+								context->fifos[cidx].pipe = usb_rcvisocpipe(dev, ep->bEndpointAddress);
-+							else
-+								context->fifos[cidx].pipe = usb_sndisocpipe(dev, ep->bEndpointAddress);
-+							context->fifos[cidx].usb_transfer_mode = USB_ISOC;
-+							iso_packet_size = ep->wMaxPacketSize; // remember max packet size
-+#ifdef VERBOSE_USB_DEBUG
-+							printk (KERN_INFO "HFC-USB: ISO Endpoint found (idx:%d cidx:%d)!\n",
-+								idx, cidx);
-+#endif
-+							break;
-+						default:
-+							context->fifos[cidx].pipe = 0;	/* reset data */
-+					}	/* switch attribute */
-+
-+					if (context->fifos[cidx].pipe) {
-+						context->fifos[cidx].fifonum = cidx;
-+						context->fifos[cidx].hfc = context;
-+						context->fifos[cidx].usb_packet_maxlen = ep->wMaxPacketSize;
-+						context->fifos[cidx].intervall = ep->bInterval;
-+						context->fifos[cidx].skbuff = NULL;
-+#ifdef VERBOSE_USB_DEBUG
-+						printk (KERN_INFO "HFC-USB: fifo%d pktlen %d interval %d\n",
-+							context->fifos[cidx].fifonum,
-+							context->fifos[cidx].usb_packet_maxlen,
-+							context->fifos[cidx].intervall);
-+#endif
-+					}
-+				}
-+
-+				ep++;
-+			}
-+
-+			// now share our luck
-+			context->dev = dev;						/* save device */
-+			context->if_used = ifnum;					/* save used interface */
-+			context->alt_used = alt_used;					/* and alternate config */
-+			context->ctrl_paksize = dev->descriptor.bMaxPacketSize0;	/* control size */
-+			context->cfg_used=vcf[16];					// store used config
-+			context->vend_idx=vend_idx;					// store found vendor
-+			context->packet_size=packet_size;
-+			context->iso_packet_size=iso_packet_size;
-+
-+			/* create the control pipes needed for register access */
-+			context->ctrl_in_pipe = usb_rcvctrlpipe(context->dev, 0);
-+			context->ctrl_out_pipe = usb_sndctrlpipe(context->dev, 0);
-+			context->ctrl_urb = usb_alloc_urb(0);
-+
-+			printk(KERN_INFO "HFC-USB: detected \"%s\" configuration: %s (if=%d alt=%d)\n",
-+				vdata[vend_idx].vend_name, conf_str[small_match], context->if_used, context->alt_used);
-+
-+			/* init the chip and register the driver */
-+			if (usb_init(context))
-+			{
-+				if (context->ctrl_urb) {
-+					usb_unlink_urb(context->ctrl_urb);
-+					usb_free_urb(context->ctrl_urb);
-+					context->ctrl_urb = NULL;
-+				}
-+				kfree(context);
-+				return(NULL);
-+			}
-+			//usb_set_intfdata(intf, context);
-+			//intf->private_data = context;
-+			return(context);
-+		} 
-+	}
-+	return(NULL);
-+}
- 
- /****************************************************/
- /* function called when an active device is removed */
- /****************************************************/
--static void
--hfc_usb_disconnect(struct usb_device *usbdev, void *drv_context)
-+//static void hfc_usb_disconnect(struct usb_interface *intf)
-+static void hfc_usb_disconnect(struct usb_device *usbdev, void* drv_context)
- {
--	hfcusb_data *context = drv_context;
-+        //hfcusb_data *context = intf->private_data;
-+        hfcusb_data* context = drv_context;
- 	int i;
--	struct sk_buff *skb;
- 
--	/* tell all fifos to terminate */
--	for (i = 0; i < HFCUSB_NUM_FIFOS; i++)
--		if (context->fifos[i].active) {
--			context->fifos[i].active = 0;
--			usb_unlink_urb(&context->fifos[i].urb);
--		}
--	while (context->active_fifos) {
--		set_current_state(TASK_INTERRUPTIBLE);
--		/* Timeout 10ms */
--		schedule_timeout((10 * HZ) / 1000);
--	}
-+	printk(KERN_INFO "HFC-USB: device disconnect\n");
-+	
-+	//intf->private_data = NULL;
-+	if (!context)
-+		return;
- 	if (timer_pending(&context->t3_timer))
- 		del_timer(&context->t3_timer);
--	context->regd.release_driver(context->regd.arg_hisax);
--	while ((skb = skb_dequeue(&context->regd.erq)) != NULL)
--		dev_kfree_skb_any(skb);
-+	if (timer_pending(&context->t4_timer))
-+		del_timer(&context->t4_timer);
-+	if (timer_pending(&context->led_timer))
-+		del_timer(&context->led_timer);
-+
-+	hisax_unregister(&context->d_if);
- 
-+	/* tell all fifos to terminate */
-+	for(i = 0; i < HFCUSB_NUM_FIFOS; i++) {
-+		if(context->fifos[i].usb_transfer_mode == USB_ISOC) {
-+			if(context->fifos[i].active > 0) {
-+	    			stop_isoc_chain(&context->fifos[i]);
-+#ifdef VERBOSE_USB_DEBUG
-+		    		printk (KERN_INFO "HFC-USB: hfc_usb_disconnect: stopping ISOC chain Fifo no %i\n", i);
-+#endif
-+ 			}
-+		} else {
-+			if(context->fifos[i].active > 0) {
-+				context->fifos[i].active = 0;
-+#ifdef VERBOSE_USB_DEBUG
-+				printk (KERN_INFO "HFC-USB: hfc_usb_disconnect: unlinking URB for Fifo no %i\n", i);
-+#endif
-+			}
-+			if (context->fifos[i].urb) {
-+				usb_unlink_urb(context->fifos[i].urb);
-+				usb_free_urb(context->fifos[i].urb);
-+				context->fifos[i].urb = NULL;
-+			}
-+		}
-+		context->fifos[i].active = 0;
-+	}
-+	if (context->ctrl_urb) {
-+		usb_unlink_urb(context->ctrl_urb);
-+		usb_free_urb(context->ctrl_urb);
-+		context->ctrl_urb = NULL;
-+	}
- 	kfree(context);		/* free our structure again */
--	MOD_DEC_USE_COUNT;	/* and decrement the usage counter */
- }				/* hfc_usb_disconnect */
- 
-+
- /************************************/
- /* our driver information structure */
- /************************************/
- static struct usb_driver hfc_drv = {
- 	name:"hfc_usb",
--#ifdef COMPAT_HAS_USB_IDTAB
- 	id_table:hfc_usb_idtab,
--#endif
- 	probe:hfc_usb_probe,
- 	disconnect:hfc_usb_disconnect,
- };
- 
--static void __exit
--hfc_usb_exit(void)
--{
- 
-+static void __exit hfc_usb_exit(void)
-+{
-+#ifdef VERBOSE_USB_DEBUG
-+	printk ("HFC-USB: calling \"hfc_usb_exit\" ...\n");
-+#endif
- 	usb_deregister(&hfc_drv);	/* release our driver */
- 	printk(KERN_INFO "HFC-USB module removed\n");
- }
- 
--static int __init
--hfc_usb_init(void)
-+static int __init hfc_usb_init(void)
- {
--	struct hisax_drvreg drv;
-+	printk ("HFC-USB: driver module revision %s loaded\n", hfcusb_revision);
- 
--	drv.version = HISAX_LOAD_VERSION;	/* set our version */
--	drv.cmd = HISAX_LOAD_CHKVER;	/* check command only */
--	if (hisax_register_hfcusb(&drv)) {
--		printk(KERN_INFO "HFC-USB <-> hisax version conflict\n");
--		return (-1);	/* unable to register */
--	}
--	if (usb_register(&hfc_drv)) {
--		printk(KERN_INFO
--		       "Unable to register HFC-USB module at usb stack\n");
--		return (-1);	/* unable to register */
-+	if(usb_register(&hfc_drv))
-+	{
-+		printk(KERN_INFO "HFC-USB: Unable to register HFC-USB module at usb stack\n");
-+		return(-1);		   /* unable to register */
- 	}
--
--	printk(KERN_INFO "HFC-USB module loaded\n");
--	return (0);
-+	return(0);
- }
- 
-+
-+
-+
-+
- module_init(hfc_usb_init);
- module_exit(hfc_usb_exit);
-+
diff --git a/openwrt/target/linux/generic-2.4/patches/202-pl2303_backport.patch b/openwrt/target/linux/generic-2.4/patches/202-pl2303_backport.patch
deleted file mode 100644
index f889ad2964..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/202-pl2303_backport.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-diff -ur linux-2.4.32/drivers/usb/serial/pl2303.c linux-2.4.32.openwrt/drivers/usb/serial/pl2303.c
---- linux-2.4.32/drivers/usb/serial/pl2303.c	2005-06-01 02:56:56.000000000 +0200
-+++ linux-2.4.32.openwrt/drivers/usb/serial/pl2303.c	2005-11-18 12:22:23.000000000 +0100
-@@ -78,6 +78,11 @@
- 	{ USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
- 	{ USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
- 	{ USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
-+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
-+	{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
-+	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
-+	{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
-+	{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
- 	{ }					/* Terminating entry */
- };
- 
-diff -ur linux-2.4.32/drivers/usb/serial/pl2303.h linux-2.4.32.openwrt/drivers/usb/serial/pl2303.h
---- linux-2.4.32/drivers/usb/serial/pl2303.h	2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.32.openwrt/drivers/usb/serial/pl2303.h	2005-11-18 12:23:38.000000000 +0100
-@@ -41,3 +41,21 @@
- 
- #define SITECOM_VENDOR_ID	0x6189
- #define SITECOM_PRODUCT_ID	0x2068
-+
-+/* Alcatel OT535/735 USB cable */
-+#define ALCATEL_VENDOR_ID	0x11f7
-+#define ALCATEL_PRODUCT_ID	0x02df
-+
-+/* Samsung I330 phone cradle */
-+#define SAMSUNG_VENDOR_ID	0x04e8
-+#define SAMSUNG_PRODUCT_ID	0x8001
-+
-+#define SIEMENS_VENDOR_ID	0x11f5
-+#define SIEMENS_PRODUCT_ID_X65	0x0003
-+
-+#define SYNTECH_VENDOR_ID	0x0745
-+#define SYNTECH_PRODUCT_ID	0x0001
-+
-+/* Nokia CA-42 Cable */
-+#define NOKIA_CA42_VENDOR_ID	0x078b
-+#define NOKIA_CA42_PRODUCT_ID	0x1234
diff --git a/openwrt/target/linux/generic-2.4/patches/203-hfsplus_fix.patch b/openwrt/target/linux/generic-2.4/patches/203-hfsplus_fix.patch
deleted file mode 100644
index 695a2d36b5..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/203-hfsplus_fix.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-diff -urN linux-2.4.30.old/fs/hfsplus/super.c linux-2.4.30.dev/fs/hfsplus/super.c
---- linux-2.4.30.old/fs/hfsplus/super.c	2003-08-25 13:44:43.000000000 +0200
-+++ linux-2.4.30.dev/fs/hfsplus/super.c	2005-04-27 19:54:40.000000000 +0200
-@@ -240,8 +240,7 @@
- 	if (!(*flags & MS_RDONLY)) {
- 		struct hfsplus_vh *vhdr = HFSPLUS_SB(sb).s_vhdr;
- 
--		if ((vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_INCNSTNT)) ||
--		    !(vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_UNMNT))) {
-+		if (!(vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_UNMNT))) {
- 			printk("HFS+-fs warning: Filesystem was not cleanly unmounted, "
- 			       "running fsck.hfsplus is recommended.  leaving read-only.\n");
- 			sb->s_flags |= MS_RDONLY;
-@@ -343,8 +342,7 @@
- 	/* Set up operations so we can load metadata */
- 	sb->s_op = &hfsplus_sops;
- 
--	if ((vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_INCNSTNT)) ||
--	    !(vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_UNMNT))) {
-+	if (!(vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_UNMNT))) {
- 		if (!silent)
- 			printk("HFS+-fs warning: Filesystem was not cleanly unmounted, "
- 			       "running fsck.hfsplus is recommended.  mounting read-only.\n");
diff --git a/openwrt/target/linux/generic-2.4/patches/206-gcc_3.4_fixes.patch b/openwrt/target/linux/generic-2.4/patches/206-gcc_3.4_fixes.patch
deleted file mode 100644
index 9cf055346a..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/206-gcc_3.4_fixes.patch
+++ /dev/null
@@ -1,225 +0,0 @@
-diff -Nur linux-2.4.30/arch/mips/kernel/signal.c linux-2.4.30.openwrt/arch/mips/kernel/signal.c
---- linux-2.4.30/arch/mips/kernel/signal.c	2005-07-02 13:00:13.000000000 +0200
-+++ linux-2.4.30.openwrt/arch/mips/kernel/signal.c	2005-07-02 13:00:49.000000000 +0200
-@@ -6,8 +6,10 @@
-  * Copyright (C) 1991, 1992  Linus Torvalds
-  * Copyright (C) 1994 - 1999  Ralf Baechle
-  * Copyright (C) 1999 Silicon Graphics, Inc.
-+ * Copyright (C) 2004  Maciej W. Rozycki
-  */
- #include <linux/config.h>
-+#include <linux/compiler.h>
- #include <linux/sched.h>
- #include <linux/mm.h>
- #include <linux/smp.h>
-@@ -76,7 +78,9 @@
-  * Atomically swap in the new signal mask, and wait for a signal.
-  */
- save_static_function(sys_sigsuspend);
--static_unused int _sys_sigsuspend(struct pt_regs regs)
-+static int _sys_sigsuspend(struct pt_regs regs)
-+	__asm__("_sys_sigsuspend") __attribute_used__;
-+static int _sys_sigsuspend(struct pt_regs regs)
- {
- 	sigset_t *uset, saveset, newset;
- 
-@@ -102,7 +106,9 @@
- }
- 
- save_static_function(sys_rt_sigsuspend);
--static_unused int _sys_rt_sigsuspend(struct pt_regs regs)
-+static int _sys_rt_sigsuspend(struct pt_regs regs)
-+	__asm__("_sys_rt_sigsuspend") __attribute_used__;
-+static int _sys_rt_sigsuspend(struct pt_regs regs)
- {
- 	sigset_t *unewset, saveset, newset;
-         size_t sigsetsize;
-diff -Nur linux-2.4.30/arch/mips/kernel/syscall.c linux-2.4.30.openwrt/arch/mips/kernel/syscall.c
---- linux-2.4.30/arch/mips/kernel/syscall.c	2005-07-02 13:00:13.000000000 +0200
-+++ linux-2.4.30.openwrt/arch/mips/kernel/syscall.c	2005-07-02 13:00:49.000000000 +0200
-@@ -5,6 +5,7 @@
-  *
-  * Copyright (C) 1995 - 2000 by Ralf Baechle
-  * Copyright (C) 2000 Silicon Graphics, Inc.
-+ * Copyright (C) 2004  Maciej W. Rozycki
-  *
-  * TODO:  Implement the compatibility syscalls.
-  *        Don't waste that much memory for empty entries in the syscall
-@@ -158,7 +159,9 @@
- }
- 
- save_static_function(sys_fork);
--static_unused int _sys_fork(struct pt_regs regs)
-+static int _sys_fork(struct pt_regs regs)
-+	__asm__("_sys_fork") __attribute_used__;
-+static int _sys_fork(struct pt_regs regs)
- {
- 	int res;
- 
-@@ -168,7 +171,9 @@
- 
- 
- save_static_function(sys_clone);
--static_unused int _sys_clone(struct pt_regs regs)
-+static int _sys_clone(struct pt_regs regs)
-+	__asm__("_sys_clone") __attribute_used__;
-+static int _sys_clone(struct pt_regs regs)
- {
- 	unsigned long clone_flags;
- 	unsigned long newsp;
-diff -Nur linux-2.4.30/arch/mips/ld.script.in linux-2.4.30.openwrt/arch/mips/ld.script.in
---- linux-2.4.30/arch/mips/ld.script.in	2005-07-02 13:00:22.000000000 +0200
-+++ linux-2.4.30.openwrt/arch/mips/ld.script.in	2005-07-02 13:00:42.000000000 +0200
-@@ -9,6 +9,7 @@
-   {
-     _ftext = . ;
-     *(.text)
-+    *(.fixup)
-     *(.rodata)
-     *(.rodata.*)
-     *(.rodata1)
-diff -Nur linux-2.4.30/arch/mips64/kernel/signal.c linux-2.4.30.openwrt/arch/mips64/kernel/signal.c
---- linux-2.4.30/arch/mips64/kernel/signal.c	2005-07-02 13:00:13.000000000 +0200
-+++ linux-2.4.30.openwrt/arch/mips64/kernel/signal.c	2005-07-02 13:00:49.000000000 +0200
-@@ -6,8 +6,10 @@
-  * Copyright (C) 1991, 1992  Linus Torvalds
-  * Copyright (C) 1994 - 2000  Ralf Baechle
-  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
-+ * Copyright (C) 2004  Maciej W. Rozycki
-  */
- #include <linux/config.h>
-+#include <linux/compiler.h>
- #include <linux/sched.h>
- #include <linux/mm.h>
- #include <linux/smp.h>
-@@ -75,7 +77,9 @@
-  * Atomically swap in the new signal mask, and wait for a signal.
-  */
- save_static_function(sys_rt_sigsuspend);
--static_unused int _sys_rt_sigsuspend(abi64_no_regargs, struct pt_regs regs)
-+static int _sys_rt_sigsuspend(abi64_no_regargs, struct pt_regs regs)
-+       __asm__("_sys_rt_sigsuspend") __attribute_used__;
-+static int _sys_rt_sigsuspend(abi64_no_regargs, struct pt_regs regs)
- {
- 	sigset_t *unewset, saveset, newset;
-         size_t sigsetsize;
-diff -Nur linux-2.4.30/arch/mips64/kernel/signal32.c linux-2.4.30.openwrt/arch/mips64/kernel/signal32.c
---- linux-2.4.30/arch/mips64/kernel/signal32.c	2005-07-02 13:00:13.000000000 +0200
-+++ linux-2.4.30.openwrt/arch/mips64/kernel/signal32.c	2005-07-02 13:00:49.000000000 +0200
-@@ -6,7 +6,9 @@
-  * Copyright (C) 1991, 1992  Linus Torvalds
-  * Copyright (C) 1994 - 2000  Ralf Baechle
-  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
-+ * Copyright (C) 2004  Maciej W. Rozycki
-  */
-+#include <linux/compiler.h>
- #include <linux/sched.h>
- #include <linux/mm.h>
- #include <linux/smp.h>
-@@ -192,7 +194,9 @@
-  * Atomically swap in the new signal mask, and wait for a signal.
-  */
- save_static_function(sys32_sigsuspend);
--static_unused int _sys32_sigsuspend(abi64_no_regargs, struct pt_regs regs)
-+static int _sys32_sigsuspend(abi64_no_regargs, struct pt_regs regs)
-+	__asm__("_sys32_sigsuspend") __attribute_used__;
-+static int _sys32_sigsuspend(abi64_no_regargs, struct pt_regs regs)
- {
- 	sigset32_t *uset;
- 	sigset_t newset, saveset;
-@@ -219,7 +223,9 @@
- }
- 
- save_static_function(sys32_rt_sigsuspend);
--static_unused int _sys32_rt_sigsuspend(abi64_no_regargs, struct pt_regs regs)
-+static int _sys32_rt_sigsuspend(abi64_no_regargs, struct pt_regs regs)
-+	__asm__("_sys32_rt_sigsuspend") __attribute_used__;
-+static int _sys32_rt_sigsuspend(abi64_no_regargs, struct pt_regs regs)
- {
- 	sigset32_t *uset;
- 	sigset_t newset, saveset;
-diff -Nur linux-2.4.30/arch/mips64/kernel/syscall.c linux-2.4.30.openwrt/arch/mips64/kernel/syscall.c
---- linux-2.4.30/arch/mips64/kernel/syscall.c	2005-07-02 13:00:13.000000000 +0200
-+++ linux-2.4.30.openwrt/arch/mips64/kernel/syscall.c	2005-07-02 13:00:49.000000000 +0200
-@@ -6,7 +6,9 @@
-  * Copyright (C) 1995 - 2000, 2001 by Ralf Baechle
-  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
-  * Copyright (C) 2001 MIPS Technologies, Inc.
-+ * Copyright (C) 2004  Maciej W. Rozycki
-  */
-+#include <linux/compiler.h>
- #include <linux/errno.h>
- #include <linux/linkage.h>
- #include <linux/mm.h>
-@@ -151,7 +153,9 @@
- }
- 
- save_static_function(sys_fork);
--static_unused int _sys_fork(abi64_no_regargs, struct pt_regs regs)
-+static int _sys_fork(abi64_no_regargs, struct pt_regs regs)
-+	__asm__("_sys_fork") __attribute_used__;
-+static int _sys_fork(abi64_no_regargs, struct pt_regs regs)
- {
- 	int res;
- 
-@@ -160,7 +164,9 @@
- }
- 
- save_static_function(sys_clone);
--static_unused int _sys_clone(abi64_no_regargs, struct pt_regs regs)
-+static int _sys_clone(abi64_no_regargs, struct pt_regs regs)
-+	__asm__("_sys_clone") __attribute_used__;
-+static int _sys_clone(abi64_no_regargs, struct pt_regs regs)
- {
- 	unsigned long clone_flags;
- 	unsigned long newsp;
-diff -Nur linux-2.4.30/include/asm-mips/ptrace.h linux-2.4.30.openwrt/include/asm-mips/ptrace.h
---- linux-2.4.30/include/asm-mips/ptrace.h	2005-07-02 13:00:13.000000000 +0200
-+++ linux-2.4.30.openwrt/include/asm-mips/ptrace.h	2005-07-02 13:00:49.000000000 +0200
-@@ -4,6 +4,7 @@
-  * for more details.
-  *
-  * Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000 by Ralf Baechle
-+ * Copyright (C) 2004  Maciej W. Rozycki
-  *
-  * Machine dependent structs and defines to help the user use
-  * the ptrace system call.
-@@ -64,12 +65,10 @@
-         "sw\t$22,"__str(PT_R22)"($29)\n\t"                              \
-         "sw\t$23,"__str(PT_R23)"($29)\n\t"                              \
-         "sw\t$30,"__str(PT_R30)"($29)\n\t"                              \
-+       "j\t_" #symbol "\n\t"                                           \
-         ".end\t" #symbol "\n\t"                                         \
-         ".size\t" #symbol",. - " #symbol)
- 
--/* Used in declaration of save_static functions.  */
--#define static_unused static __attribute__((unused))
--
- #endif /* !__ASSEMBLY__ */
- 
- /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-diff -Nur linux-2.4.30/include/asm-mips64/ptrace.h linux-2.4.30.openwrt/include/asm-mips64/ptrace.h
---- linux-2.4.30/include/asm-mips64/ptrace.h	2005-07-02 13:00:13.000000000 +0200
-+++ linux-2.4.30.openwrt/include/asm-mips64/ptrace.h	2005-07-02 13:00:49.000000000 +0200
-@@ -5,6 +5,7 @@
-  *
-  * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000 by Ralf Baechle
-  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
-+ * Copyright (C) 2004  Maciej W. Rozycki
-  */
- #ifndef _ASM_PTRACE_H
- #define _ASM_PTRACE_H
-@@ -61,12 +62,10 @@
-         "sd\t$22,"__str(PT_R22)"($29)\n\t"                              \
-         "sd\t$23,"__str(PT_R23)"($29)\n\t"                              \
-         "sd\t$30,"__str(PT_R30)"($29)\n\t"                              \
-+        "j\t_" #symbol "\n\t"                                           \
-         ".end\t" #symbol "\n\t"                                         \
-         ".size\t" #symbol",. - " #symbol)
- 
--/* Used in declaration of save_static functions.  */
--#define static_unused static __attribute__((unused))
--
- #define abi64_no_regargs						\
- 	unsigned long __dummy0,						\
- 	unsigned long __dummy1,						\
diff --git a/openwrt/target/linux/generic-2.4/patches/208-usb2_fix.patch b/openwrt/target/linux/generic-2.4/patches/208-usb2_fix.patch
deleted file mode 100644
index f8e5be12c1..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/208-usb2_fix.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-diff -ur linux-2.4.30.dev/drivers/usb/host/ehci-q.c linux-tmp/drivers/usb/host/ehci-q.c
---- linux-2.4.30.dev/drivers/usb/host/ehci-q.c	2005-01-19 15:10:07.000000000 +0100
-+++ linux-tmp/drivers/usb/host/ehci-q.c	2005-03-30 05:11:12.000000000 +0200
-@@ -783,6 +765,11 @@
- 		if (!(cmd & CMD_ASE)) {
- 			/* in case a clear of CMD_ASE didn't take yet */
- 			(void) handshake (&ehci->regs->status, STS_ASS, 0, 150);
-+
-+			/* force async head to be valid */
-+			writel ((u32)ehci->async->qh_dma,
-+					&ehci->regs->async_next);
-+
- 			cmd |= CMD_ASE | CMD_RUN;
- 			writel (cmd, &ehci->regs->command);
- 			ehci->hcd.state = USB_STATE_RUNNING;
diff --git a/openwrt/target/linux/generic-2.4/patches/209-build_fixes.patch b/openwrt/target/linux/generic-2.4/patches/209-build_fixes.patch
deleted file mode 100644
index 235ee042a5..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/209-build_fixes.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-diff -urN linux.old/Makefile linux.dev/Makefile
---- linux.old/Makefile	2005-08-26 13:41:41.689634168 +0200
-+++ linux.dev/Makefile	2005-08-26 13:44:34.233403528 +0200
-@@ -354,7 +354,7 @@
- 	@rm -f .ver1
- 
- include/linux/version.h: ./Makefile
--	@expr length "$(KERNELRELEASE)" \<= $(uts_len) > /dev/null || \
-+	@-expr length "$(KERNELRELEASE)" \<= $(uts_len) > /dev/null || \
- 	  (echo KERNELRELEASE \"$(KERNELRELEASE)\" exceeds $(uts_len) characters >&2; false)
- 	@echo \#define UTS_RELEASE \"$(KERNELRELEASE)\" > .ver
- 	@echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)` >> .ver
-@@ -509,7 +509,7 @@
- ifdef CONFIG_MODVERSIONS
- 	$(MAKE) update-modverfile
- endif
--	scripts/mkdep -- `find $(FINDHPATH) \( -name SCCS -o -name .svn \) -prune -o -follow -name \*.h ! -name modversions.h -print` > .hdepend
-+	find $(FINDHPATH) \( -name SCCS -o -name .svn \) -prune -o -follow -name \*.h ! -name modversions.h -print | xargs scripts/mkdep -- > .hdepend
- 	scripts/mkdep -- init/*.c > .depend
- 
- ifdef CONFIG_MODVERSIONS
---- linux.old/Rules.make	2005-08-31 00:37:34.363109288 +0200
-+++ linux.dev/Rules.make	2005-08-31 13:59:20.140676296 +0200
-@@ -126,7 +126,7 @@
- # This make dependencies quickly
- #
- fastdep: dummy
--	$(TOPDIR)/scripts/mkdep $(CFLAGS) $(EXTRA_CFLAGS_nostdinc) -- $(wildcard *.[chS]) > .depend
-+	find -name '*.[chS]' | xargs $(TOPDIR)/scripts/mkdep $(CFLAGS) $(EXTRA_CFLAGS_nostdinc) -- > .depend
- ifdef ALL_SUB_DIRS
- 	$(MAKE) $(patsubst %,_sfdep_%,$(ALL_SUB_DIRS)) _FASTDEP_ALL_SUB_DIRS="$(ALL_SUB_DIRS)"
- endif
-@@ -176,7 +176,14 @@
- _modinst__: dummy
- ifneq "$(strip $(ALL_MOBJS))" ""
- 	mkdir -p $(MODLIB)/kernel/$(MOD_DESTDIR)
--	cp $(sort $(ALL_MOBJS)) $(MODLIB)/kernel/$(MOD_DESTDIR)
-+	#@cp $(sort $(ALL_MOBJS)) $(MODLIB)/kernel/$(MOD_DESTDIR)
-+	for f in $(ALL_MOBJS) ; do \
-+		$(OBJCOPY) -R __ksymtab -R .comment -R .note -x \
-+		`$(NM) $$f | cut -f3- -d' ' | sed -n \
-+			-e 's/__module_parm_\(.*\)/-K \1/p' \
-+			-e 's/__ks..tab_\(.*\)/-K \1/p'` \
-+		$$f $(MODLIB)/kernel/$(MOD_DESTDIR)$(MOD_TARGET)`basename $$f`; \
-+	done
- endif
- 
- .PHONY: modules_install
diff --git a/openwrt/target/linux/generic-2.4/patches/210-fix-irq-serial.patch b/openwrt/target/linux/generic-2.4/patches/210-fix-irq-serial.patch
deleted file mode 100644
index 630dc04977..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/210-fix-irq-serial.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- linux-2.4.30/drivers/char/serial.c	2005-06-29 20:44:46.000000000 +0200
-+++ linux-2.4.30.serial/drivers/char/serial.c	2005-06-29 21:15:12.000000000 +0200
-@@ -5455,18 +5455,6 @@
- 		       sizeof(struct rs_multiport_struct));
- #endif
- 	}
--#ifdef CONFIG_SERIAL_CONSOLE
--	/*
--	 *	The interrupt of the serial console port
--	 *	can't be shared.
--	 */
--	if (sercons.flags & CON_CONSDEV) {
--		for(i = 0; i < NR_PORTS; i++)
--			if (i != sercons.index &&
--			    rs_table[i].irq == rs_table[sercons.index].irq)
--				rs_table[i].irq = 0;
--	}
--#endif
- 	show_serial_version();
- 
- 	/* Initialize the tty_driver structure */
diff --git a/openwrt/target/linux/generic-2.4/patches/212-htb_time_fix.patch b/openwrt/target/linux/generic-2.4/patches/212-htb_time_fix.patch
deleted file mode 100644
index 7281093b02..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/212-htb_time_fix.patch
+++ /dev/null
@@ -1,75 +0,0 @@
---- linux.old/net/sched/sch_htb.c	2005-11-15 14:09:41.548066000 +0100
-+++ linux.dev/net/sched/sch_htb.c	2005-11-15 14:08:34.000000000 +0100
-@@ -369,7 +369,7 @@
- 		struct list_head *l;
- 		list_for_each (l,q->hash+i) {
- 			struct htb_class *cl = list_entry(l,struct htb_class,hlist);
--			long diff = PSCHED_TDIFF_SAFE(q->now, cl->t_c, (u32)cl->mbuffer, 0);
-+			long long diff = PSCHED_TDIFF_SAFE(q->now, cl->t_c, (u32)cl->mbuffer, 0);
- 			printk(KERN_DEBUG "htb*c%x m=%d t=%ld c=%ld pq=%lu df=%ld ql=%d "
- 					"pa=%x f:",
- 				cl->classid,cl->cmode,cl->tokens,cl->ctokens,
-@@ -617,7 +617,7 @@
-  * mode transitions per time unit. The speed gain is about 1/6.
-  */
- static __inline__ enum htb_cmode 
--htb_class_mode(struct htb_class *cl,long *diff)
-+htb_class_mode(struct htb_class *cl,long long *diff)
- {
-     long toks;
- 
-@@ -650,7 +650,7 @@
-  * to mode other than HTB_CAN_SEND (see htb_add_to_wait_tree).
-  */
- static void 
--htb_change_class_mode(struct htb_sched *q, struct htb_class *cl, long *diff)
-+htb_change_class_mode(struct htb_sched *q, struct htb_class *cl, long long *diff)
- { 
- 	enum htb_cmode new_mode = htb_class_mode(cl,diff);
- 	
-@@ -815,7 +815,8 @@
- static void htb_charge_class(struct htb_sched *q,struct htb_class *cl,
- 		int level,int bytes)
- {	
--	long toks,diff;
-+	long long diff;
-+	long toks;
- 	enum htb_cmode old_mode;
- 	HTB_DBG(5,1,"htb_chrg_cl cl=%X lev=%d len=%d\n",cl->classid,level,bytes);
- 
-@@ -831,7 +832,7 @@
- #ifdef HTB_DEBUG
- 		if (diff > cl->mbuffer || diff < 0 || PSCHED_TLESS(q->now, cl->t_c)) {
- 			if (net_ratelimit())
--				printk(KERN_ERR "HTB: bad diff in charge, cl=%X diff=%lX now=%Lu then=%Lu j=%lu\n",
-+				printk(KERN_ERR "HTB: bad diff in charge, cl=%X diff=%Ld now=%Lu then=%Lu j=%lu\n",
- 				       cl->classid, diff,
- 				       (unsigned long long) q->now,
- 				       (unsigned long long) cl->t_c,
-@@ -848,7 +849,7 @@
- 		}
- 		HTB_ACCNT (ctokens,cbuffer,ceil);
- 		cl->t_c = q->now;
--		HTB_DBG(5,2,"htb_chrg_clp cl=%X diff=%ld tok=%ld ctok=%ld\n",cl->classid,diff,cl->tokens,cl->ctokens);
-+		HTB_DBG(5,2,"htb_chrg_clp cl=%X diff=%Ld tok=%ld ctok=%ld\n",cl->classid,diff,cl->tokens,cl->ctokens);
- 
- 		old_mode = cl->cmode; diff = 0;
- 		htb_change_class_mode(q,cl,&diff);
-@@ -887,7 +888,7 @@
- 			level,q->wait_pq[level].rb_node,q->row_mask[level]);
- 	for (i = 0; i < 500; i++) {
- 		struct htb_class *cl;
--		long diff;
-+		long long diff;
- 		rb_node_t *p = q->wait_pq[level].rb_node;
- 		if (!p) return 0;
- 		while (p->rb_left) p = p->rb_left;
-@@ -902,7 +903,7 @@
- #ifdef HTB_DEBUG
- 		if (diff > cl->mbuffer || diff < 0 || PSCHED_TLESS(q->now, cl->t_c)) {
- 			if (net_ratelimit())
--				printk(KERN_ERR "HTB: bad diff in events, cl=%X diff=%lX now=%Lu then=%Lu j=%lu\n",
-+				printk(KERN_ERR "HTB: bad diff in events, cl=%X diff=%Ld now=%Lu then=%Lu j=%lu\n",
- 				       cl->classid, diff,
- 				       (unsigned long long) q->now,
- 				       (unsigned long long) cl->t_c,
diff --git a/openwrt/target/linux/generic-2.4/patches/213-htb_disable_hysteresis.patch b/openwrt/target/linux/generic-2.4/patches/213-htb_disable_hysteresis.patch
deleted file mode 100644
index 5d0ff92662..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/213-htb_disable_hysteresis.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux.old/net/sched/sch_htb.c	2005-11-15 14:09:41.548066000 +0100
-+++ linux.dev/net/sched/sch_htb.c	2005-11-15 14:08:34.000000000 +0100
-@@ -74,7 +74,7 @@
- #define HTB_EWMAC 2	/* rate average over HTB_EWMAC*HTB_HSIZE sec */
- #define HTB_DEBUG 1	/* compile debugging support (activated by tc tool) */
- #define HTB_RATECM 1    /* whether to use rate computer */
--#define HTB_HYSTERESIS 1/* whether to use mode hysteresis for speedup */
-+#define HTB_HYSTERESIS 0/* whether to use mode hysteresis for speedup */
- #define HTB_QLOCK(S) spin_lock_bh(&(S)->dev->queue_lock)
- #define HTB_QUNLOCK(S) spin_unlock_bh(&(S)->dev->queue_lock)
- #define HTB_VER 0x30011	/* major must be matched with number suplied by TC as version */
diff --git a/openwrt/target/linux/generic-2.4/patches/222-sound.patch b/openwrt/target/linux/generic-2.4/patches/222-sound.patch
deleted file mode 100644
index 351e8c2072..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/222-sound.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff -rNu linux-2.4.30/drivers/sound/sound_core.c linux-2.4.30.new/drivers/sound/sound_core.c
---- linux-2.4.30/drivers/sound/sound_core.c	2001-10-01 05:26:08.000000000 +1000
-+++ linux-2.4.30.new/drivers/sound/sound_core.c	2005-08-27 22:52:55.061719968 +1000
-@@ -174,9 +174,9 @@
- 	}
- 	
- 	if (r == low)
--		sprintf (name_buf, "%s", name);
-+		snprintf (name_buf, sizeof(name_buf), "%s", name);
- 	else
--		sprintf (name_buf, "%s%d", name, (r - low) / SOUND_STEP);
-+		snprintf (name_buf, sizeof(name_buf), "%s%d", name, (r - low) / SOUND_STEP);
- 	s->de = devfs_register (devfs_handle, name_buf,
- 				DEVFS_FL_NONE, SOUND_MAJOR, s->unit_minor,
- 				S_IFCHR | mode, fops, NULL);
-@@ -507,9 +507,9 @@
- 		 *  ALSA toplevel modules for soundcards, thus we need
- 		 *  load them at first.	  [Jaroslav Kysela <perex@jcu.cz>]
- 		 */
--		sprintf(mod, "sound-slot-%i", unit>>4);
-+		snprintf(mod, sizeof(mod), "sound-slot-%i", unit>>4);
- 		request_module(mod);
--		sprintf(mod, "sound-service-%i-%i", unit>>4, chain);
-+		snprintf(mod, sizeof(mod), "sound-service-%i-%i", unit>>4, chain);
- 		request_module(mod);
- 		spin_lock(&sound_loader_lock);
- 		s = __look_for_unit(chain, unit);
diff --git a/openwrt/target/linux/generic-2.4/patches/224-atm_hotplug.patch b/openwrt/target/linux/generic-2.4/patches/224-atm_hotplug.patch
deleted file mode 100644
index c431d8c6bc..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/224-atm_hotplug.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-diff -urN linux.old/include/linux/atmdev.h linux.dev/include/linux/atmdev.h
---- linux.old/include/linux/atmdev.h	2005-11-17 12:51:55.883585000 +0100
-+++ linux.dev/include/linux/atmdev.h	2005-11-17 13:49:22.012671000 +0100
-@@ -408,6 +408,7 @@
- struct atm_dev *atm_dev_register(const char *type,const struct atmdev_ops *ops,
-     int number,atm_dev_flags_t *flags); /* number == -1: pick first available */
- struct atm_dev *atm_dev_lookup(int number);
-+void atm_dev_set_link_status(struct atm_dev *dev, int status);
- void atm_dev_deregister(struct atm_dev *dev);
- void shutdown_atm_dev(struct atm_dev *dev);
- void vcc_insert_socket(struct sock *sk);
-diff -urN linux.old/net/atm/resources.c linux.dev/net/atm/resources.c
---- linux.old/net/atm/resources.c	2003-11-28 19:26:21.000000000 +0100
-+++ linux.dev/net/atm/resources.c	2005-11-17 14:27:26.514267750 +0100
-@@ -10,6 +10,7 @@
- #include <linux/sonet.h>
- #include <linux/kernel.h> /* for barrier */
- #include <linux/module.h>
-+#include <linux/kmod.h>
- #include <linux/bitops.h>
- #include <net/sock.h>	 /* for struct sock */
- #include <asm/segment.h> /* for get_fs_long and put_fs_long */
-@@ -70,6 +71,44 @@
- 	return dev;
- }
- 
-+#ifdef CONFIG_HOTPLUG
-+static void atm_run_sbin_hotplug(struct atm_dev *dev, char *action)
-+{
-+	char *argv[3], *envp[5], ifname[12 + IFNAMSIZ], atmname[255], action_str[32];
-+	int i;
-+
-+	sprintf(ifname, "INTERFACE=atm%d", dev->number);
-+	sprintf(atmname, "ATMDRIVER=%s", dev->type);
-+	sprintf(action_str, "ACTION=%s", action);
-+
-+	i = 0;
-+	argv[i++] = hotplug_path;
-+	argv[i++] = "net";
-+	argv[i] = 0;
-+
-+	i = 0;
-+	/* minimal command environment */
-+	envp [i++] = "HOME=/";
-+	envp [i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
-+	envp [i++] = ifname;
-+	envp [i++] = atmname;
-+	envp [i++] = action_str;
-+	envp [i] = 0;
-+
-+	return call_usermodehelper(argv [0], argv, envp);
-+}
-+#endif
-+
-+void atm_dev_set_link_status(struct atm_dev *dev, int status)
-+{
-+#ifdef CONFIG_HOTPLUG
-+	if (status)
-+		atm_run_sbin_hotplug(dev, "up");
-+	else
-+		atm_run_sbin_hotplug(dev, "down");
-+#endif
-+}
-+
- struct atm_dev *atm_dev_register(const char *type, const struct atmdev_ops *ops,
- 				 int number, atm_dev_flags_t *flags)
- {
-@@ -123,7 +162,10 @@
- 		}
- 	}
- #endif
--
-+#ifdef CONFIG_HOTPLUG
-+	atm_run_sbin_hotplug(dev, "register");
-+#endif
-+	
- 	return dev;
- }
- 
-@@ -131,6 +173,10 @@
- void atm_dev_deregister(struct atm_dev *dev)
- {
- 	unsigned long warning_time;
-+	
-+#ifdef CONFIG_HOTPLUG
-+	atm_run_sbin_hotplug(dev, "unregister");
-+#endif
- 
- #ifdef CONFIG_PROC_FS
- 	if (dev->ops->proc_read)
-@@ -399,6 +445,7 @@
- }
- 
- 
-+EXPORT_SYMBOL(atm_dev_set_link_status);
- EXPORT_SYMBOL(atm_dev_register);
- EXPORT_SYMBOL(atm_dev_deregister);
- EXPORT_SYMBOL(atm_dev_lookup);
diff --git a/openwrt/target/linux/generic-2.4/patches/225-string_lib_useful_exports.patch b/openwrt/target/linux/generic-2.4/patches/225-string_lib_useful_exports.patch
deleted file mode 100644
index b89f765173..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/225-string_lib_useful_exports.patch
+++ /dev/null
@@ -1,170 +0,0 @@
-diff -ruN linux-2.4.32-old/lib/string.c linux-2.4.32-new/lib/string.c
---- linux-2.4.32-old/lib/string.c	2004-11-17 12:54:22.000000000 +0100
-+++ linux-2.4.32-new/lib/string.c	2006-01-17 14:41:17.000000000 +0100
-@@ -50,6 +50,7 @@
- 	}
- 	return (int)c1 - (int)c2;
- }
-+EXPORT_SYMBOL(strnicmp);
- #endif
- 
- char * ___strtok;
-@@ -68,6 +69,7 @@
- 		/* nothing */;
- 	return tmp;
- }
-+EXPORT_SYMBOL(strcpy);
- #endif
- 
- #ifndef __HAVE_ARCH_STRNCPY
-@@ -90,6 +92,7 @@
- 
- 	return tmp;
- }
-+EXPORT_SYMBOL(strncpy);
- #endif
- 
- #ifndef __HAVE_ARCH_STRCAT
-@@ -109,6 +112,7 @@
- 
- 	return tmp;
- }
-+EXPORT_SYMBOL(strcat);
- #endif
- 
- #ifndef __HAVE_ARCH_STRNCAT
-@@ -138,6 +142,7 @@
- 
- 	return tmp;
- }
-+EXPORT_SYMBOL(strncat);
- #endif
- 
- #ifndef __HAVE_ARCH_STRCMP
-@@ -157,6 +162,7 @@
- 
- 	return __res;
- }
-+EXPORT_SYMBOL(strcmp);
- #endif
- 
- #ifndef __HAVE_ARCH_STRNCMP
-@@ -178,6 +184,7 @@
- 
- 	return __res;
- }
-+EXPORT_SYMBOL(strncmp);
- #endif
- 
- #ifndef __HAVE_ARCH_STRCHR
-@@ -193,6 +200,7 @@
- 			return NULL;
- 	return (char *) s;
- }
-+EXPORT_SYMBOL(strchr);
- #endif
- 
- #ifndef __HAVE_ARCH_STRRCHR
-@@ -210,6 +218,7 @@
-        } while (--p >= s);
-        return NULL;
- }
-+EXPORT_SYMBOL(strrchr);
- #endif
- 
- #ifndef __HAVE_ARCH_STRLEN
-@@ -225,6 +234,7 @@
- 		/* nothing */;
- 	return sc - s;
- }
-+EXPORT_SYMBOL(strlen);
- #endif
- 
- #ifndef __HAVE_ARCH_STRNLEN
-@@ -241,6 +251,7 @@
- 		/* nothing */;
- 	return sc - s;
- }
-+EXPORT_SYMBOL(strnlen);
- #endif
- 
- #ifndef __HAVE_ARCH_STRSPN
-@@ -268,6 +279,7 @@
- 
- 	return count;
- }
-+EXPORT_SYMBOL(strspn);
- #endif
- 
- #ifndef __HAVE_ARCH_STRPBRK
-@@ -288,6 +300,7 @@
- 	}
- 	return NULL;
- }
-+EXPORT_SYMBOL(strpbrk);
- #endif
- 
- #ifndef __HAVE_ARCH_STRTOK
-@@ -345,6 +358,7 @@
- 
- 	return sbegin;
- }
-+EXPORT_SYMBOL(strsep);
- #endif
- 
- #ifndef __HAVE_ARCH_MEMSET
-@@ -365,6 +379,7 @@
- 
- 	return s;
- }
-+EXPORT_SYMBOL(memset);
- #endif
- 
- #ifndef __HAVE_ARCH_BCOPY
-@@ -409,6 +424,7 @@
- 
- 	return dest;
- }
-+EXPORT_SYMBOL(memcpy);
- #endif
- 
- #ifndef __HAVE_ARCH_MEMMOVE
-@@ -439,6 +455,7 @@
- 
- 	return dest;
- }
-+EXPORT_SYMBOL(memmove);
- #endif
- 
- #ifndef __HAVE_ARCH_MEMCMP
-@@ -458,6 +475,7 @@
- 			break;
- 	return res;
- }
-+EXPORT_SYMBOL(memcmp);
- #endif
- 
- #ifndef __HAVE_ARCH_MEMSCAN
-@@ -482,6 +500,7 @@
- 	}
-   	return (void *) p;
- }
-+EXPORT_SYMBOL(memscan);
- #endif
- 
- #ifndef __HAVE_ARCH_STRSTR
-@@ -506,6 +525,7 @@
- 	}
- 	return NULL;
- }
-+EXPORT_SYMBOL(strstr);
- #endif
- 
- #ifndef __HAVE_ARCH_MEMCHR
-@@ -528,5 +548,5 @@
- 	}
- 	return NULL;
- }
--
-+EXPORT_SYMBOL(memchr);
- #endif
diff --git a/openwrt/target/linux/generic-2.4/patches/226-atm_br2684.patch b/openwrt/target/linux/generic-2.4/patches/226-atm_br2684.patch
deleted file mode 100644
index 56f00155de..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/226-atm_br2684.patch
+++ /dev/null
@@ -1,578 +0,0 @@
-diff -urN linux-2.4.32/net/atm/br2684.c linux-2.4.32.new/net/atm/br2684.c
---- linux-2.4.32/net/atm/br2684.c	2004-08-08 01:26:06.000000000 +0200
-+++ linux-2.4.32.new/net/atm/br2684.c	2006-02-06 18:59:40.000000000 +0100
-@@ -55,36 +55,55 @@
- #define skb_debug(skb)	do {} while (0)
- #endif
- 
-+#define	BR2684_LLC_LEN		3
-+#define	BR2684_SNAP_LEN		3
-+#define	BR2684_ETHERTYPE_LEN	2
-+#define	BR2684_PID_LEN		2
-+#define	BR2684_PAD_LEN		2
-+
-+static unsigned char llc_common[] = { 0xaa, 0xaa, 0x03 };
-+static unsigned char snap_bridged[] = { 0x00, 0x80, 0xc2 };
-+static unsigned char snap_routed[] = { 0x00, 0x00, 0x00 };
-+static unsigned char pid_ipv4[] = { 0x00, 0x07 };
-+static unsigned char ethertype_ipv4[] = { 0x08, 0x00 };
-+static unsigned char ethertype_ipv6[] = { 0x86, 0xdd };
-+static unsigned char pad_bridged[] = { 0x00, 0x00 };
-+
- static unsigned char llc_oui_pid_pad[] =
-     { 0xAA, 0xAA, 0x03, 0x00, 0x80, 0xC2, 0x00, 0x07, 0x00, 0x00 };
-+static unsigned char llc_oui_ipv6[] =
-+    { 0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00, 0x86, 0xdd };
-+static unsigned char llc_oui_ipv4[] =
-+    { 0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00, 0x08, 0x00 };
- #define PADLEN	(2)
- 
- enum br2684_encaps {
--	e_vc  = BR2684_ENCAPS_VC,
-+	e_vc = BR2684_ENCAPS_VC,
- 	e_llc = BR2684_ENCAPS_LLC,
- };
- 
- struct br2684_vcc {
--	struct atm_vcc  *atmvcc;
-+	struct atm_vcc *atmvcc;
- 	struct br2684_dev *brdev;
- 	/* keep old push,pop functions for chaining */
--	void (*old_push)(struct atm_vcc *vcc,struct sk_buff *skb);
-+	void (*old_push) (struct atm_vcc * vcc, struct sk_buff * skb);
- 	/* void (*old_pop)(struct atm_vcc *vcc,struct sk_buff *skb); */
- 	enum br2684_encaps encaps;
-+	enum br2684_payload payload;
- 	struct list_head brvccs;
- #ifdef CONFIG_ATM_BR2684_IPFILTER
- 	struct br2684_filter filter;
--#endif /* CONFIG_ATM_BR2684_IPFILTER */
-+#endif				/* CONFIG_ATM_BR2684_IPFILTER */
- #ifndef FASTER_VERSION
- 	unsigned copies_needed, copies_failed;
--#endif /* FASTER_VERSION */
-+#endif				/* FASTER_VERSION */
- };
- 
- struct br2684_dev {
- 	struct net_device net_dev;
- 	struct list_head br2684_devs;
- 	int number;
--	struct list_head brvccs; /* one device <=> one vcc (before xmas) */
-+	struct list_head brvccs;	/* one device <=> one vcc (before xmas) */
- 	struct net_device_stats stats;
- 	int mac_was_set;
- };
-@@ -173,24 +192,84 @@
- 		}
- 		skb = skb2;
- 	}
--	skb_push(skb, minheadroom);
--	if (brvcc->encaps == e_llc)
--		memcpy(skb->data, llc_oui_pid_pad, 10);
--	else
--		memset(skb->data, 0, 2);
--#endif /* FASTER_VERSION */
-+
-+	/* This skb_push is a problem: routed packets need less headroom than
-+	 * bridged packets.
-+	 */
-+
-+/*	skb_push(skb, minheadroom); */
-+	if (brvcc->encaps == e_llc) {
-+		int offset = 0;
-+		int actual_headroom;
-+
-+		actual_headroom =
-+		    BR2684_LLC_LEN +
-+		    BR2684_SNAP_LEN +
-+		    ((brvcc->payload == p_bridged) ?
-+		     (BR2684_PID_LEN + BR2684_PAD_LEN) :
-+		     BR2684_ETHERTYPE_LEN);
-+
-+		skb_push(skb, actual_headroom);
-+		memcpy(skb->data, llc_common, BR2684_LLC_LEN);
-+		offset += BR2684_LLC_LEN;
-+
-+		if (brvcc->payload == p_bridged) {
-+			memcpy(skb->data + offset, snap_bridged,
-+			       BR2684_SNAP_LEN);
-+			offset += BR2684_SNAP_LEN;
-+			/* pid_ipv4 is poorly named.  should probably be
-+			 * pid_ethernet
-+			 */
-+			memcpy(skb->data + offset, pid_ipv4,
-+			       BR2684_PID_LEN);
-+			offset += BR2684_PID_LEN;
-+			memcpy(skb->data + offset, pad_bridged,
-+			       BR2684_PAD_LEN);
-+			offset += BR2684_PAD_LEN;
-+		} else if (brvcc->payload == p_routed) {
-+			unsigned short prot =
-+			    __constant_ntohs(skb->protocol);
-+			memcpy(skb->data + offset, snap_routed,
-+			       BR2684_SNAP_LEN);
-+			offset += BR2684_SNAP_LEN;
-+
-+			switch (prot) {
-+			case ETH_P_IP:
-+				memcpy(skb->data + offset,
-+				       ethertype_ipv4,
-+				       BR2684_ETHERTYPE_LEN);
-+				break;
-+			case ETH_P_IPV6:
-+				memcpy(skb->data + offset,
-+				       ethertype_ipv6,
-+				       BR2684_ETHERTYPE_LEN);
-+				break;
-+			default:
-+				dev_kfree_skb(skb);
-+				return 0;
-+			}
-+			offset += BR2684_ETHERTYPE_LEN;
-+
-+		}
-+	} else {
-+		skb_push(skb, 2);
-+		if (brvcc->payload == p_bridged)
-+			memset(skb->data, 0, 2);
-+	}
-+#endif				/* FASTER_VERSION */
- 	skb_debug(skb);
- 
- 	ATM_SKB(skb)->vcc = atmvcc = brvcc->atmvcc;
--	DPRINTK("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc, atmvcc->dev);
-+	DPRINTK("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc,
-+		atmvcc->dev);
- 	if (!atm_may_send(atmvcc, skb->truesize)) {
- 		/* we free this here for now, because we cannot know in a higher 
--			layer whether the skb point it supplied wasn't freed yet.
--			now, it always is.
--		*/
-+		   layer whether the skb point it supplied wasn't freed yet.
-+		   now, it always is.
-+		 */
- 		dev_kfree_skb(skb);
- 		return 0;
--		}
-+	}
- 	atomic_add(skb->truesize, &atmvcc->sk->wmem_alloc);
- 	ATM_SKB(skb)->atm_options = atmvcc->atm_options;
- 	brdev->stats.tx_packets++;
-@@ -428,18 +507,39 @@
- 	atm_return(atmvcc, skb->truesize);
- 	DPRINTK("skb from brdev %p\n", brdev);
- 	if (brvcc->encaps == e_llc) {
-+		/* accept packets that have "ipv[46]" in the snap header */
-+		/* 8 - 2 == sizeof(llc_oui_ipv6) - BR2684_ETHERTYPE_LEN */
-+		if (memcmp(skb->data, llc_oui_ipv6, 8 - 2) == 0) {
-+			plen = sizeof(llc_oui_ipv6);
-+
-+			if (memcmp(skb->data + 6, ethertype_ipv6, 2) == 0)
-+				skb->protocol =
-+				    __constant_htons(ETH_P_IPV6);
-+			else if (memcmp(skb->data + 6, ethertype_ipv4, 2)
-+				 == 0)
-+				skb->protocol = __constant_htons(ETH_P_IP);
-+			else {
-+				brdev->stats.rx_errors++;
-+				dev_kfree_skb(skb);
-+				return;
-+			}
-+			skb_pull(skb, plen);
-+			skb->nh.raw = skb->data;
-+			skb->pkt_type = PACKET_HOST;
-+		}
-+
- 		/* let us waste some time for checking the encapsulation.
- 		   Note, that only 7 char is checked so frames with a valid FCS
- 		   are also accepted (but FCS is not checked of course) */
--		if (memcmp(skb->data, llc_oui_pid_pad, 7)) {
-+		else if (memcmp(skb->data, llc_oui_pid_pad, 7) == 0) {
-+			skb_pull(skb, plen - ETH_HLEN);
-+			skb->protocol =
-+			    eth_type_trans(skb, &brdev->net_dev);
-+		} else {
- 			brdev->stats.rx_errors++;
- 			dev_kfree_skb(skb);
- 			return;
- 		}
--
--		/* Strip FCS if present */
--		if (skb->len > 7 && skb->data[7] == 0x01)
--			__skb_trim(skb, skb->len - 4);
- 	} else {
- 		plen = PADLEN + ETH_HLEN;	/* pad, dstmac,srcmac, ethtype */
- 		/* first 2 chars should be 0 */
-@@ -448,13 +548,14 @@
- 			dev_kfree_skb(skb);
- 			return;
- 		}
-+		skb_pull(skb, plen - ETH_HLEN);
-+		skb->protocol = eth_type_trans(skb, &brdev->net_dev);
- 	}
- 	if (skb->len < plen) {
- 		brdev->stats.rx_errors++;
- 		dev_kfree_skb(skb);	/* dev_ not needed? */
- 		return;
- 	}
--
- #ifdef FASTER_VERSION
- 	/* FIXME: tcpdump shows that pointer to mac header is 2 bytes earlier,
- 	   than should be. What else should I set? */
-@@ -465,30 +566,29 @@
- 	skb->protocol = ((u16 *) skb->data)[-1];
- #else				/* some protocols might require this: */
- 	skb->protocol = br_type_trans(skb, &brdev->net_dev);
--#endif /* CONFIG_BR2684_FAST_TRANS */
-+#endif				/* CONFIG_BR2684_FAST_TRANS */
- #else
--	skb_pull(skb, plen - ETH_HLEN);
--	skb->protocol = eth_type_trans(skb, &brdev->net_dev);
--#endif /* FASTER_VERSION */
-+	/* skb_pull(skb, plen - ETH_HLEN); */
-+	/* skb->protocol = eth_type_trans(skb, &brdev->net_dev); */
-+#endif				/* FASTER_VERSION */
- #ifdef CONFIG_ATM_BR2684_IPFILTER
- 	if (packet_fails_filter(skb->protocol, brvcc, skb)) {
- 		brdev->stats.rx_dropped++;
- 		dev_kfree_skb(skb);
- 		return;
- 	}
--#endif /* CONFIG_ATM_BR2684_IPFILTER */
-+#endif				/* CONFIG_ATM_BR2684_IPFILTER */
- 	skb->dev = &brdev->net_dev;
--	ATM_SKB(skb)->vcc = atmvcc;	/* needed ? */
-+	/* ATM_SKB(skb)->vcc = atmvcc;  *//* needed ? */
- 	DPRINTK("received packet's protocol: %x\n", ntohs(skb->protocol));
- 	skb_debug(skb);
--	if (!(brdev->net_dev.flags & IFF_UP)) { /* sigh, interface is down */
-+	if (!(brdev->net_dev.flags & IFF_UP)) {	/* sigh, interface is down */
- 		brdev->stats.rx_dropped++;
- 		dev_kfree_skb(skb);
- 		return;
- 	}
- 	brdev->stats.rx_packets++;
- 	brdev->stats.rx_bytes += skb->len;
--	memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data));
- 	netif_rx(skb);
- }
- 
-@@ -525,10 +625,10 @@
- 		err = -EEXIST;
- 		goto error;
- 	}
--	if (be.fcs_in != BR2684_FCSIN_NO || be.fcs_out != BR2684_FCSOUT_NO ||
--	    be.fcs_auto || be.has_vpiid || be.send_padding || (be.encaps !=
--	    BR2684_ENCAPS_VC && be.encaps != BR2684_ENCAPS_LLC) ||
--	    be.min_size != 0) {
-+	if (be.fcs_in != BR2684_FCSIN_NO || be.fcs_out != BR2684_FCSOUT_NO
-+	    || be.fcs_auto || be.has_vpiid || be.send_padding
-+	    || (be.encaps != BR2684_ENCAPS_VC
-+		&& be.encaps != BR2684_ENCAPS_LLC) || be.min_size != 0) {
- 		err = -EINVAL;
- 		goto error;
- 	}
-@@ -554,18 +654,21 @@
- 	brvcc->atmvcc = atmvcc;
- 	atmvcc->user_back = brvcc;
- 	brvcc->encaps = (enum br2684_encaps) be.encaps;
-+	brvcc->payload = (enum br2684_payload) be.payload;
- 	brvcc->old_push = atmvcc->push;
- 	barrier();
- 	atmvcc->push = br2684_push;
- 	skb_queue_head_init(&copy);
- 	skb_migrate(&atmvcc->sk->receive_queue, &copy);
- 	while ((skb = skb_dequeue(&copy))) {
-+#ifdef notdef
- 		BRPRIV(skb->dev)->stats.rx_bytes -= skb->len;
- 		BRPRIV(skb->dev)->stats.rx_packets--;
-+#endif
- 		br2684_push(atmvcc, skb);
- 	}
- 	return 0;
--    error:
-+      error:
- 	write_unlock_irq(&devs_lock);
- 	MOD_DEC_USE_COUNT;
- 	return err;
-@@ -608,12 +711,25 @@
- 
- 	if (ni.ifname[0] != '\0') {
- 		memcpy(brdev->net_dev.name, ni.ifname,
--		    sizeof(brdev->net_dev.name));
--		brdev->net_dev.name[sizeof(brdev->net_dev.name) - 1] = '\0';
-+		       sizeof(brdev->net_dev.name));
-+		brdev->net_dev.name[sizeof(brdev->net_dev.name) - 1] =
-+		    '\0';
- 	} else
- 		sprintf(brdev->net_dev.name, "nas%d", brdev->number);
- 	DPRINTK("registered netdev %s\n", brdev->net_dev.name);
--	ether_setup(&brdev->net_dev);
-+	if (ni.payload == p_routed) {
-+		brdev->net_dev.hard_header_len = 0;
-+		brdev->net_dev.addr_len = 0;
-+		brdev->net_dev.mtu = 1500;
-+
-+		/* Type PPP seems most suitable */
-+		brdev->net_dev.type = ARPHRD_PPP;
-+		brdev->net_dev.flags =
-+		    IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
-+		brdev->net_dev.tx_queue_len = 100;
-+	} else {
-+		ether_setup(&brdev->net_dev);
-+	}
- 	brdev->mac_was_set = 0;
- #ifdef FASTER_VERSION
- 	my_eth_header = brdev->net_dev.hard_header;
-@@ -677,12 +793,11 @@
- 		err = br2684_setfilt(atmvcc, arg);
- 		MOD_DEC_USE_COUNT;
- 		return err;
--#endif /* CONFIG_ATM_BR2684_IPFILTER */
-+#endif				/* CONFIG_ATM_BR2684_IPFILTER */
- 	}
- 	return -ENOIOCTLCMD;
- }
- 
--#ifdef CONFIG_PROC_FS
- /* Never put more than 256 bytes in at once */
- static int br2684_proc_engine(loff_t pos, char *buf)
- {
-@@ -692,52 +807,62 @@
- 	list_for_each(lhd, &br2684_devs) {
- 		brdev = list_entry_brdev(lhd);
- 		if (pos-- == 0)
--			return sprintf(buf, "dev %.16s: num=%d, mac=%02X:%02X:"
--			    "%02X:%02X:%02X:%02X (%s)\n", brdev->net_dev.name,
--			    brdev->number,
--			    brdev->net_dev.dev_addr[0],
--			    brdev->net_dev.dev_addr[1],
--			    brdev->net_dev.dev_addr[2],
--			    brdev->net_dev.dev_addr[3],
--			    brdev->net_dev.dev_addr[4],
--			    brdev->net_dev.dev_addr[5],
--			    brdev->mac_was_set ? "set" : "auto");
-+			return sprintf(buf,
-+				       "dev %.16s: num=%d, mac=%02X:%02X:"
-+				       "%02X:%02X:%02X:%02X (%s)\n",
-+				       brdev->net_dev.name, brdev->number,
-+				       brdev->net_dev.dev_addr[0],
-+				       brdev->net_dev.dev_addr[1],
-+				       brdev->net_dev.dev_addr[2],
-+				       brdev->net_dev.dev_addr[3],
-+				       brdev->net_dev.dev_addr[4],
-+				       brdev->net_dev.dev_addr[5],
-+				       brdev->
-+				       mac_was_set ? "set" : "auto");
- 		list_for_each(lhc, &brdev->brvccs) {
- 			brvcc = list_entry_brvcc(lhc);
- 			if (pos-- == 0)
--				return sprintf(buf, "  vcc %d.%d.%d: encaps=%s"
-+				return sprintf(buf,
-+					       "  vcc %d.%d.%d: encaps=%s"
-+					       ", payload=%s"
- #ifndef FASTER_VERSION
--				    ", failed copies %u/%u"
--#endif /* FASTER_VERSION */
--				    "\n", brvcc->atmvcc->dev->number,
--				    brvcc->atmvcc->vpi, brvcc->atmvcc->vci,
--				    (brvcc->encaps == e_llc) ? "LLC" : "VC"
-+					       ", failed copies %u/%u"
-+#endif				/* FASTER_VERSION */
-+					       "\n",
-+					       brvcc->atmvcc->dev->number,
-+					       brvcc->atmvcc->vpi,
-+					       brvcc->atmvcc->vci,
-+					       (brvcc->encaps ==
-+						e_llc) ? "LLC" : "VC",
-+					       (brvcc->payload ==
-+						p_bridged) ? "bridged" :
-+					       "routed"
- #ifndef FASTER_VERSION
--				    , brvcc->copies_failed
--				    , brvcc->copies_needed
--#endif /* FASTER_VERSION */
-+					       , brvcc->copies_failed,
-+					       brvcc->copies_needed
-+#endif				/* FASTER_VERSION */
- 				    );
- #ifdef CONFIG_ATM_BR2684_IPFILTER
- #define b1(var, byte)	((u8 *) &brvcc->filter.var)[byte]
- #define bs(var)		b1(var, 0), b1(var, 1), b1(var, 2), b1(var, 3)
- 			if (brvcc->filter.netmask != 0 && pos-- == 0)
--				return sprintf(buf, "    filter=%d.%d.%d.%d/"
--				    "%d.%d.%d.%d\n", bs(prefix), bs(netmask));
-+				return sprintf(buf,
-+					       "    filter=%d.%d.%d.%d/"
-+					       "%d.%d.%d.%d\n", bs(prefix),
-+					       bs(netmask));
- #undef bs
- #undef b1
--#endif /* CONFIG_ATM_BR2684_IPFILTER */
-+#endif				/* CONFIG_ATM_BR2684_IPFILTER */
- 		}
- 	}
- 	return 0;
- }
- 
- static ssize_t br2684_proc_read(struct file *file, char *buf, size_t count,
--	loff_t *pos)
-+				loff_t * pos)
- {
- 	unsigned long page;
- 	int len = 0, x, left;
--	loff_t n = *pos;
--
- 	page = get_free_page(GFP_KERNEL);
- 	if (!page)
- 		return -ENOMEM;
-@@ -746,7 +871,7 @@
- 		left = count;
- 	read_lock(&devs_lock);
- 	for (;;) {
--		x = br2684_proc_engine(n, &((char *) page)[len]);
-+		x = br2684_proc_engine(*pos, &((char *) page)[len]);
- 		if (x == 0)
- 			break;
- 		if (x > left)
-@@ -761,12 +886,11 @@
- 		}
- 		len += x;
- 		left -= x;
--		n++;
-+		(*pos)++;
- 		if (left < 256)
- 			break;
- 	}
- 	read_unlock(&devs_lock);
--	*pos = n;
- 	if (len > 0 && copy_to_user(buf, (char *) page, len))
- 		len = -EFAULT;
- 	free_page(page);
-@@ -774,23 +898,20 @@
- }
- 
- static struct file_operations br2684_proc_operations = {
--	read: br2684_proc_read,
-+      read:br2684_proc_read,
- };
- 
- extern struct proc_dir_entry *atm_proc_root;	/* from proc.c */
--#endif /* CONFIG_PROC_FS */
- 
- /* the following avoids some spurious warnings from the compiler */
- #define UNUSED __attribute__((unused))
- 
- static int __init UNUSED br2684_init(void)
- {
--#ifdef CONFIG_PROC_FS
- 	struct proc_dir_entry *p;
- 	if ((p = create_proc_entry("br2684", 0, atm_proc_root)) == NULL)
- 		return -ENOMEM;
- 	p->proc_fops = &br2684_proc_operations;
--#endif /* CONFIG_PROC_FS */
- 	br2684_ioctl_set(br2684_ioctl);
- 	return 0;
- }
-@@ -799,9 +920,7 @@
- {
- 	struct br2684_dev *brdev;
- 	br2684_ioctl_set(NULL);
--#ifdef CONFIG_PROC_FS
- 	remove_proc_entry("br2684", atm_proc_root);
--#endif /* CONFIG_PROC_FS */
- 	while (!list_empty(&br2684_devs)) {
- 		brdev = list_entry_brdev(br2684_devs.next);
- 		unregister_netdev(&brdev->net_dev);
-diff -urN linux-2.4.32/net/atm/common.c linux-2.4.32.new/net/atm/common.c
---- linux-2.4.32/net/atm/common.c	2004-02-18 14:36:32.000000000 +0100
-+++ linux-2.4.32.new/net/atm/common.c	2006-02-06 17:26:52.000000000 +0100
-@@ -158,6 +158,7 @@
- }
- #ifdef CONFIG_ATM_BR2684_MODULE
- EXPORT_SYMBOL(br2684_ioctl_set);
-+EXPORT_SYMBOL(br2684_ioctl_hook);
- #endif
- #endif
- 
---- linux-2.4.32/include/linux/atmbr2684.h	2002-08-03 02:39:45.000000000 +0200
-+++ linux-2.4.32.new/include/linux/atmbr2684.h	2006-02-06 19:01:24.000000000 +0100
-@@ -3,6 +3,7 @@
- 
- #include <linux/atm.h>
- #include <linux/if.h>		/* For IFNAMSIZ */
-+#include <linux/if_ether.h>	/* ETH_P_* */
- 
- /*
-  * Type of media we're bridging (ethernet, token ring, etc)  Currently only
-@@ -36,15 +37,24 @@
- #define BR2684_ENCAPS_AUTODETECT (2)	/* Unsuported */
- 
- /*
-+ * Is this VC bridged or routed?
-+ */
-+
-+#define	BR2684_PAYLOAD_ROUTED	(0)
-+#define	BR2684_PAYLOAD_BRIDGED	(1)
-+
-+
-+/*
-  * This is for the ATM_NEWBACKENDIF call - these are like socket families:
-  * the first element of the structure is the backend number and the rest
-  * is per-backend specific
-  */
- struct atm_newif_br2684 {
--	atm_backend_t	backend_num;	/* ATM_BACKEND_BR2684 */
--	int		media;		/* BR2684_MEDIA_* */
--	char		ifname[IFNAMSIZ];
--	int		mtu;
-+	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
-+	int media;		/* BR2684_MEDIA_* */
-+	char ifname[IFNAMSIZ];
-+	int mtu;
-+	int payload;		/* bridged or routed */
- };
- 
- /*
-@@ -68,16 +78,17 @@
-  * is per-backend specific
-  */
- struct atm_backend_br2684 {
--	atm_backend_t	backend_num;	/* ATM_BACKEND_BR2684 */
-+	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
- 	struct br2684_if_spec ifspec;
--	int	fcs_in;		/* BR2684_FCSIN_* */
--	int	fcs_out;	/* BR2684_FCSOUT_* */
--	int	fcs_auto;	/* 1: fcs_{in,out} disabled if no FCS rx'ed */
--	int	encaps;		/* BR2684_ENCAPS_* */
--	int	has_vpiid;	/* 1: use vpn_id - Unsupported */
--	__u8	vpn_id[7];
--	int	send_padding;	/* unsupported */
--	int	min_size;	/* we will pad smaller packets than this */
-+	int fcs_in;		/* BR2684_FCSIN_* */
-+	int fcs_out;		/* BR2684_FCSOUT_* */
-+	int fcs_auto;		/* 1: fcs_{in,out} disabled if no FCS rx'ed */
-+	int encaps;		/* BR2684_ENCAPS_* */
-+	int payload;		/* BR2684_PAYLOAD_* */
-+	int has_vpiid;		/* 1: use vpn_id - Unsupported */
-+	__u8 vpn_id[7];
-+	int send_padding;	/* unsupported */
-+	int min_size;		/* we will pad smaller packets than this */
- };
- 
- /*
-@@ -95,7 +106,12 @@
- 	struct br2684_filter filter;
- };
- 
-+enum br2684_payload {
-+	p_routed = BR2684_PAYLOAD_ROUTED,
-+	p_bridged = BR2684_PAYLOAD_BRIDGED,
-+};
-+
- #define BR2684_SETFILT	_IOW( 'a', ATMIOC_BACKEND + 0, \
- 				struct br2684_filter_set)
- 
--#endif /* _LINUX_ATMBR2684_H */
-+#endif				/* _LINUX_ATMBR2684_H */
diff --git a/openwrt/target/linux/generic-2.4/patches/601-netfilter_ipp2p_0.8.1rc1.patch b/openwrt/target/linux/generic-2.4/patches/601-netfilter_ipp2p_0.8.1rc1.patch
deleted file mode 100644
index bfaa6e4b76..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/601-netfilter_ipp2p_0.8.1rc1.patch
+++ /dev/null
@@ -1,929 +0,0 @@
-diff -urN linux.old/include/linux/netfilter_ipv4/ipt_ipp2p.h linux.dev/include/linux/netfilter_ipv4/ipt_ipp2p.h
---- linux.old/include/linux/netfilter_ipv4/ipt_ipp2p.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/linux/netfilter_ipv4/ipt_ipp2p.h	2006-03-23 14:37:56.000000000 +0100
-@@ -0,0 +1,31 @@
-+#ifndef __IPT_IPP2P_H
-+#define __IPT_IPP2P_H
-+#define IPP2P_VERSION "0.8.1_rc1"
-+
-+struct ipt_p2p_info {
-+    int cmd;
-+    int debug;
-+};
-+
-+#endif //__IPT_IPP2P_H
-+
-+#define SHORT_HAND_IPP2P	1 /* --ipp2p switch*/
-+//#define SHORT_HAND_DATA		4 /* --ipp2p-data switch*/
-+#define SHORT_HAND_NONE		5 /* no short hand*/
-+
-+#define IPP2P_EDK		(1 << 1)
-+#define IPP2P_DATA_KAZAA	(1 << 2)
-+#define IPP2P_DATA_EDK		(1 << 3)
-+#define IPP2P_DATA_DC		(1 << 4)
-+#define IPP2P_DC		(1 << 5)
-+#define IPP2P_DATA_GNU		(1 << 6)
-+#define IPP2P_GNU		(1 << 7)
-+#define IPP2P_KAZAA		(1 << 8)
-+#define IPP2P_BIT		(1 << 9)
-+#define IPP2P_APPLE		(1 << 10)
-+#define IPP2P_SOUL		(1 << 11)
-+#define IPP2P_WINMX		(1 << 12)
-+#define IPP2P_ARES		(1 << 13)
-+#define IPP2P_MUTE		(1 << 14)
-+#define IPP2P_WASTE		(1 << 15)
-+#define IPP2P_XDCC		(1 << 16)
-diff -urN linux.old/net/ipv4/netfilter/Config.in linux.dev/net/ipv4/netfilter/Config.in
---- linux.old/net/ipv4/netfilter/Config.in	2006-03-23 14:35:20.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/Config.in	2006-03-23 14:35:58.000000000 +0100
-@@ -29,6 +29,7 @@
-   dep_tristate '  TOS match support' CONFIG_IP_NF_MATCH_TOS $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  recent match support' CONFIG_IP_NF_MATCH_RECENT $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  ECN match support' CONFIG_IP_NF_MATCH_ECN $CONFIG_IP_NF_IPTABLES
-+  dep_tristate '  peer to peer traffic match support' CONFIG_IP_NF_MATCH_IPP2P $CONFIG_IP_NF_IPTABLES
-  
-   dep_tristate '  DSCP match support' CONFIG_IP_NF_MATCH_DSCP $CONFIG_IP_NF_IPTABLES
-  
-diff -urN linux.old/net/ipv4/netfilter/Makefile linux.dev/net/ipv4/netfilter/Makefile
---- linux.old/net/ipv4/netfilter/Makefile	2006-03-23 14:35:20.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/Makefile	2006-03-23 14:35:58.000000000 +0100
-@@ -76,6 +76,7 @@
- obj-$(CONFIG_IP_NF_MATCH_LIMIT) += ipt_limit.o
- obj-$(CONFIG_IP_NF_MATCH_MARK) += ipt_mark.o
- obj-$(CONFIG_IP_NF_MATCH_MAC) += ipt_mac.o
-+obj-$(CONFIG_IP_NF_MATCH_IPP2P) += ipt_ipp2p.o
- 
- obj-$(CONFIG_IP_NF_MATCH_PKTTYPE) += ipt_pkttype.o
- obj-$(CONFIG_IP_NF_MATCH_MULTIPORT) += ipt_multiport.o
-diff -urN linux.old/net/ipv4/netfilter/ipt_ipp2p.c linux.dev/net/ipv4/netfilter/ipt_ipp2p.c
---- linux.old/net/ipv4/netfilter/ipt_ipp2p.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/ipt_ipp2p.c	2006-03-23 14:37:18.000000000 +0100
-@@ -0,0 +1,868 @@
-+#if defined(MODVERSIONS)
-+#include <linux/modversions.h>
-+#endif
-+#include <linux/module.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/version.h>
-+#include <linux/netfilter_ipv4/ipt_ipp2p.h>
-+#include <net/tcp.h>
-+#include <net/udp.h>
-+
-+#define get_u8(X,O)  (*(__u8 *)(X + O))
-+#define get_u16(X,O)  (*(__u16 *)(X + O))
-+#define get_u32(X,O)  (*(__u32 *)(X + O))
-+
-+MODULE_AUTHOR("Eicke Friedrich/Klaus Degner <ipp2p@ipp2p.org>");
-+MODULE_DESCRIPTION("An extension to iptables to identify P2P traffic.");
-+MODULE_LICENSE("GPL");
-+
-+
-+/*Search for UDP eDonkey/eMule/Kad commands*/
-+int
-+udp_search_edk (unsigned char *haystack, int packet_len)
-+{
-+    unsigned char *t = haystack;
-+    t += 8;
-+
-+	switch (t[0]) {
-+		case 0xe3: 
-+		{	/*edonkey*/
-+			switch (t[1]) 
-+			{
-+				/* client -> server status request */
-+				case 0x96: 
-+					if (packet_len == 14) return ((IPP2P_EDK * 100) + 50);
-+					break;
-+				/* server -> client status request */
-+				case 0x97: if (packet_len == 42) return ((IPP2P_EDK * 100) + 51);
-+					break;
-+						/* server description request */
-+						/* e3 2a ff f0 .. | size == 6 */
-+				case 0xa2: if ( (packet_len == 14) && ( get_u16(t,2) == __constant_htons(0xfff0) ) ) return ((IPP2P_EDK * 100) + 52);
-+					break;
-+						/* server description response */
-+						/* e3 a3 ff f0 ..  | size > 40 && size < 200 */
-+				//case 0xa3: return ((IPP2P_EDK * 100) + 53);
-+				//	break;
-+				case 0x9a: if (packet_len==26) return ((IPP2P_EDK * 100) + 54);
-+					break;
-+
-+				case 0x92: if (packet_len==18) return ((IPP2P_EDK * 100) + 55);
-+					break;
-+			}
-+			break;
-+		}
-+		case 0xe4: 
-+		{
-+			switch (t[1]) 
-+			{
-+						/* e4 20 .. | size == 43 */
-+				case 0x20: if ((packet_len == 43) && (t[2] != 0x00) && (t[34] != 0x00)) return ((IPP2P_EDK * 100) + 60);
-+					break;
-+						/* e4 00 .. 00 | size == 35 ? */
-+				case 0x00: if ((packet_len == 35) && (t[26] == 0x00)) return ((IPP2P_EDK * 100) + 61);
-+					break;
-+						/* e4 10 .. 00 | size == 35 ? */
-+				case 0x10: if ((packet_len == 35) && (t[26] == 0x00)) return ((IPP2P_EDK * 100) + 62);
-+					break;
-+						/* e4 18 .. 00 | size == 35 ? */
-+				case 0x18: if ((packet_len == 35) && (t[26] == 0x00)) return ((IPP2P_EDK * 100) + 63);
-+					break;
-+						/* e4 52 .. | size = 44 */
-+				case 0x52: if (packet_len == 44 ) return ((IPP2P_EDK * 100) + 64);
-+					break;
-+						/* e4 58 .. | size == 6 */
-+				case 0x58: if (packet_len == 14 ) return ((IPP2P_EDK * 100) + 65);
-+					break;
-+						/* e4 59 .. | size == 2 */
-+				case 0x59: if (packet_len == 10 )return ((IPP2P_EDK * 100) + 66);
-+					break;
-+					/* e4 28 .. | packet_len == 52,77,102,127... */
-+				case 0x28: if (((packet_len-52) % 25) == 0) return ((IPP2P_EDK * 100) + 67);
-+					break;
-+					/* e4 50 xx xx | size == 4 */
-+				case 0x50: if (packet_len == 12) return ((IPP2P_EDK * 100) + 68);
-+					break;
-+					/* e4 40 xx xx | size == 48 */
-+				case 0x40: if (packet_len == 56) return ((IPP2P_EDK * 100) + 69);
-+					break;
-+			}
-+			break;
-+		}
-+	} /* end of switch (t[0]) */
-+    return 0;
-+}/*udp_search_edk*/
-+
-+
-+/*Search for UDP Gnutella commands*/
-+int
-+udp_search_gnu (unsigned char *haystack, int packet_len)
-+{
-+    unsigned char *t = haystack;
-+    t += 8;
-+    
-+    if (memcmp(t, "GND", 3) == 0) return ((IPP2P_GNU * 100) + 51);
-+    if (memcmp(t, "GNUTELLA ", 9) == 0) return ((IPP2P_GNU * 100) + 52);
-+    return 0;
-+}/*udp_search_gnu*/
-+
-+
-+/*Search for UDP KaZaA commands*/
-+int
-+udp_search_kazaa (unsigned char *haystack, int packet_len)
-+{
-+    unsigned char *t = haystack;
-+    
-+    if (t[packet_len-1] == 0x00){
-+	t += (packet_len - 6);
-+	if (memcmp(t, "KaZaA", 5) == 0) return (IPP2P_KAZAA * 100 +50);
-+    }
-+    
-+    return 0;
-+}/*udp_search_kazaa*/
-+
-+/*Search for UDP DirectConnect commands*/
-+int
-+udp_search_directconnect (unsigned char *haystack, int packet_len)
-+{
-+    unsigned char *t = haystack;
-+    if ((*(t + 8) == 0x24) && (*(t + packet_len - 1) == 0x7c)) {
-+    	t+=8;
-+    	if (memcmp(t, "SR ", 3) == 0)	 		return ((IPP2P_DC * 100) + 60);
-+    	if (memcmp(t, "Ping ", 5) == 0)	 		return ((IPP2P_DC * 100) + 61);
-+    }
-+    return 0;
-+}/*udp_search_directconnect*/
-+
-+
-+
-+/*Search for UDP BitTorrent commands*/
-+int
-+udp_search_bit (unsigned char *haystack, int packet_len)
-+{
-+	switch(packet_len)
-+	{
-+		case 24:
-+			/* ^ 00 00 04 17 27 10 19 80 */
-+			if ((ntohl(get_u32(haystack, 8)) == 0x00000417) && (ntohl(get_u32(haystack, 12)) == 0x27101980)) 
-+				return (IPP2P_BIT * 100 + 50);
-+			break;
-+		case 44:
-+			if (get_u32(haystack, 16) == __constant_htonl(0x00000400) && get_u32(haystack, 36) == __constant_htonl(0x00000104)) 
-+				return (IPP2P_BIT * 100 + 51);
-+			if (get_u32(haystack, 16) == __constant_htonl(0x00000400))
-+				return (IPP2P_BIT * 100 + 61);
-+			break;
-+		case 65:
-+			if (get_u32(haystack, 16) == __constant_htonl(0x00000404) && get_u32(haystack, 36) == __constant_htonl(0x00000104)) 
-+				return (IPP2P_BIT * 100 + 52);
-+			if (get_u32(haystack, 16) == __constant_htonl(0x00000404))
-+				return (IPP2P_BIT * 100 + 62);
-+			break;
-+		case 67:
-+			if (get_u32(haystack, 16) == __constant_htonl(0x00000406) && get_u32(haystack, 36) == __constant_htonl(0x00000104)) 
-+				return (IPP2P_BIT * 100 + 53);
-+			if (get_u32(haystack, 16) == __constant_htonl(0x00000406))
-+				return (IPP2P_BIT * 100 + 63);
-+			break;
-+		case 211:
-+			if (get_u32(haystack, 8) == __constant_htonl(0x00000405)) 
-+				return (IPP2P_BIT * 100 + 54);
-+			break;
-+		case 29:
-+			if ((get_u32(haystack, 8) == __constant_htonl(0x00000401))) 
-+				return (IPP2P_BIT * 100 + 55);
-+			break;
-+		case 52:
-+			if (get_u32(haystack,8)  == __constant_htonl(0x00000827) &&
-+			get_u32(haystack,12) == __constant_htonl(0x37502950))
-+				return (IPP2P_BIT * 100 + 80);
-+			break;
-+		default:
-+			/* this packet does not have a constant size */
-+			if (packet_len >= 40 && get_u32(haystack, 16) == __constant_htonl(0x00000402) && get_u32(haystack, 36) == __constant_htonl(0x00000104)) 
-+				return (IPP2P_BIT * 100 + 56);
-+			break;
-+	}
-+    
-+	/* some extra-bitcomet rules:
-+	* "d1:" [a|r] "d2:id20:"
-+	*/
-+	if (packet_len > 30 && get_u8(haystack, 8) == 'd' && get_u8(haystack, 9) == '1' && get_u8(haystack, 10) == ':' )
-+	{
-+		if (get_u8(haystack, 11) == 'a' || get_u8(haystack, 11) == 'r')
-+		{
-+			if (memcmp(haystack+12,"d2:id20:",8)==0)
-+				return (IPP2P_BIT * 100 + 57);
-+		}
-+	}
-+    
-+#if 0
-+	/* bitlord rules */
-+	/* packetlen must be bigger than 40 */
-+	/* first 4 bytes are zero */
-+	if (packet_len > 40 && get_u32(haystack, 8) == 0x00000000)
-+	{
-+		/* first rule: 00 00 00 00 01 00 00 xx xx xx xx 00 00 00 00*/
-+		if (get_u32(haystack, 12) == 0x00000000 && 
-+		    get_u32(haystack, 16) == 0x00010000 &&
-+		    get_u32(haystack, 24) == 0x00000000 )
-+			return (IPP2P_BIT * 100 + 71);
-+			
-+		/* 00 01 00 00 0d 00 00 xx xx xx xx 00 00 00 00*/
-+		if (get_u32(haystack, 12) == 0x00000001 && 
-+		    get_u32(haystack, 16) == 0x000d0000 &&
-+		    get_u32(haystack, 24) == 0x00000000 )
-+			return (IPP2P_BIT * 100 + 71);
-+		
-+		    
-+	}
-+#endif
-+
-+    return 0;
-+}/*udp_search_bit*/
-+
-+
-+
-+/*Search for Ares commands*/
-+//#define IPP2P_DEBUG_ARES
-+int
-+search_ares (const unsigned char *payload, const u16 plen)
-+//int search_ares (unsigned char *haystack, int packet_len, int head_len)
-+{
-+//	const unsigned char *t = haystack + head_len;
-+	
-+	/* all ares packets start with  */
-+	if (payload[1] == 0 && (plen - payload[0]) == 3)
-+	{
-+		switch (payload[2])
-+		{
-+			case 0x5a:
-+				/* ares connect */
-+				if ( plen == 6 && payload[5] == 0x05 ) return ((IPP2P_ARES * 100) + 1);
-+				break;
-+			case 0x09:
-+				/* ares search, min 3 chars --> 14 bytes
-+				 * lets define a search can be up to 30 chars --> max 34 bytes
-+				 */
-+				if ( plen >= 14 && plen <= 34 ) return ((IPP2P_ARES * 100) + 1);
-+				break;
-+#ifdef IPP2P_DEBUG_ARES
-+			default:
-+			printk(KERN_DEBUG "Unknown Ares command %x recognized, len: %u \n", (unsigned int) payload[2],plen);
-+#endif /* IPP2P_DEBUG_ARES */
-+		}
-+	}
-+
-+#if 0	        
-+	/* found connect packet: 03 00 5a 04 03 05 */
-+	/* new version ares 1.8: 03 00 5a xx xx 05 */
-+    if ((plen) == 6){	/* possible connect command*/
-+	if ((payload[0] == 0x03) && (payload[1] == 0x00) && (payload[2] == 0x5a) && (payload[5] == 0x05))
-+	    return ((IPP2P_ARES * 100) + 1);
-+    }
-+    if ((plen) == 60){	/* possible download command*/
-+	if ((payload[59] == 0x0a) && (payload[58] == 0x0a)){
-+	    if (memcmp(t, "PUSH SHA1:", 10) == 0) /* found download command */
-+	    	return ((IPP2P_ARES * 100) + 2);
-+	}
-+    }
-+#endif
-+
-+    return 0;
-+} /*search_ares*/
-+
-+/*Search for SoulSeek commands*/
-+int
-+search_soul (const unsigned char *payload, const u16 plen)
-+{
-+//#define IPP2P_DEBUG_SOUL
-+    /* match: xx xx xx xx | xx = sizeof(payload) - 4 */
-+    if (get_u32(payload, 0) == (plen - 4)){
-+	const __u32 m=get_u32(payload, 4);
-+	/* match 00 yy yy 00, yy can be everything */
-+        if ( get_u8(payload, 4) == 0x00 && get_u8(payload, 7) == 0x00 )
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+	printk(KERN_DEBUG "0: Soulseek command 0x%x recognized\n",get_u32(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 1);
-+	}
-+	
-+        /* next match: 01 yy 00 00 | yy can be everything */
-+        if ( get_u8(payload, 4) == 0x01 && get_u16(payload, 6) == 0x0000 )
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+	printk(KERN_DEBUG "1: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 2);
-+	}
-+	
-+	/* other soulseek commandos are: 1-5,7,9,13-18,22,23,26,28,35-37,40-46,50,51,60,62-69,91,92,1001 */
-+	/* try to do this in an intelligent way */
-+	/* get all small commandos */
-+	switch(m)
-+	{
-+		case 7:
-+		case 9:
-+		case 22:
-+		case 23:
-+		case 26:
-+		case 28:
-+		case 50:
-+		case 51:
-+		case 60:
-+		case 91:
-+		case 92:
-+		case 1001:
-+#ifdef IPP2P_DEBUG_SOUL
-+		printk(KERN_DEBUG "2: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 3);
-+	}
-+	
-+	if (m > 0 && m < 6 ) 
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+		printk(KERN_DEBUG "3: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 4);
-+	}
-+	if (m > 12 && m < 19 )
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+		printk(KERN_DEBUG "4: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 5);
-+	}
-+
-+	if (m > 34 && m < 38 )
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+		printk(KERN_DEBUG "5: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 6);
-+	}
-+
-+	if (m > 39 && m < 47 )
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+		printk(KERN_DEBUG "6: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 7);
-+	}
-+
-+	if (m > 61 && m < 70 ) 
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+		printk(KERN_DEBUG "7: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 8);
-+	}
-+
-+#ifdef IPP2P_DEBUG_SOUL
-+	printk(KERN_DEBUG "unknown SOULSEEK command: 0x%x, first 16 bit: 0x%x, first 8 bit: 0x%x ,soulseek ???\n",get_u32(payload, 4),get_u16(payload, 4) >> 16,get_u8(payload, 4) >> 24);
-+#endif /* IPP2P_DEBUG_SOUL */
-+    }
-+	
-+	/* match 14 00 00 00 01 yy 00 00 00 STRING(YY) 01 00 00 00 00 46|50 00 00 00 00 */
-+	/* without size at the beginning !!! */
-+	if ( get_u32(payload, 0) == 0x14 && get_u8(payload, 4) == 0x01 )
-+	{
-+		__u32 y=get_u32(payload, 5);
-+		/* we need 19 chars + string */
-+		if ( (y + 19) <= (plen) )
-+		{
-+			const unsigned char *w=payload+9+y;
-+			if (get_u32(w, 0) == 0x01 && ( get_u16(w, 4) == 0x4600 || get_u16(w, 4) == 0x5000) && get_u32(w, 6) == 0x00);
-+#ifdef IPP2P_DEBUG_SOUL
-+	    		printk(KERN_DEBUG "Soulssek special client command recognized\n");
-+#endif /* IPP2P_DEBUG_SOUL */
-+	    		return ((IPP2P_SOUL * 100) + 9);
-+		}
-+	}
-+    return 0;
-+}
-+
-+
-+/*Search for WinMX commands*/
-+int
-+search_winmx (const unsigned char *payload, const u16 plen)
-+{
-+//#define IPP2P_DEBUG_WINMX
-+    if (((plen) == 4) && (memcmp(payload, "SEND", 4) == 0))  return ((IPP2P_WINMX * 100) + 1);
-+    if (((plen) == 3) && (memcmp(payload, "GET", 3) == 0))  return ((IPP2P_WINMX * 100) + 2);
-+    //if (packet_len < (head_len + 10)) return 0;
-+    if (plen < 10) return 0;
-+    
-+    if ((memcmp(payload, "SEND", 4) == 0) || (memcmp(payload, "GET", 3) == 0)){
-+        u16 c=4;
-+        const u16 end=plen-2;
-+        u8 count=0;
-+        while (c < end)
-+        {
-+        	if (payload[c]== 0x20 && payload[c+1] == 0x22)
-+        	{
-+        		c++;
-+        		count++;
-+        		if (count>=2) return ((IPP2P_WINMX * 100) + 3);
-+        	}
-+        	c++;
-+        }
-+    }
-+    
-+    if ( plen == 149 && payload[0] == '8' )
-+    {
-+#ifdef IPP2P_DEBUG_WINMX
-+    	printk(KERN_INFO "maybe WinMX\n");
-+#endif
-+    	if (get_u32(payload,17) == 0 && get_u32(payload,21) == 0 && get_u32(payload,25) == 0 &&
-+//    	    get_u32(payload,33) == __constant_htonl(0x71182b1a) && get_u32(payload,37) == __constant_htonl(0x05050000) &&
-+//    	    get_u32(payload,133) == __constant_htonl(0x31097edf) && get_u32(payload,145) == __constant_htonl(0xdcb8f792))
-+    	    get_u16(payload,39) == 0 && get_u16(payload,135) == __constant_htons(0x7edf) && get_u16(payload,147) == __constant_htons(0xf792))
-+    	    
-+    	{
-+#ifdef IPP2P_DEBUG_WINMX
-+    		printk(KERN_INFO "got WinMX\n");
-+#endif
-+    		return ((IPP2P_WINMX * 100) + 4);
-+    	}
-+    }
-+    return 0;
-+} /*search_winmx*/
-+
-+
-+/*Search for appleJuice commands*/
-+int
-+search_apple (const unsigned char *payload, const u16 plen)
-+{
-+    if ( (plen > 7) && (payload[6] == 0x0d) && (payload[7] == 0x0a) && (memcmp(payload, "ajprot", 6) == 0))  return (IPP2P_APPLE * 100);
-+    
-+    return 0;
-+}
-+
-+
-+/*Search for BitTorrent commands*/
-+int
-+search_bittorrent (const unsigned char *payload, const u16 plen)
-+{
-+    if (plen > 20)
-+    {
-+	/* test for match 0x13+"BitTorrent protocol" */
-+	if (payload[0] == 0x13) 
-+	{
-+		if (memcmp(payload+1, "BitTorrent protocol", 19) == 0) return (IPP2P_BIT * 100);
-+	}
-+	
-+	/* get tracker commandos, all starts with GET /
-+	* then it can follow: scrape| announce
-+	* and then ?hash_info=
-+	*/
-+	if (memcmp(payload,"GET /",5) == 0)
-+	{
-+		/* message scrape */
-+		if ( memcmp(payload+5,"scrape?info_hash=",17)==0 ) return (IPP2P_BIT * 100 + 1);
-+		/* message announce */
-+		if ( memcmp(payload+5,"announce?info_hash=",19)==0 ) return (IPP2P_BIT * 100 + 2);
-+	}
-+    } 
-+    else 
-+    {
-+    	/* bitcomet encryptes the first packet, so we have to detect another 
-+    	 * one later in the flow */
-+    	 /* first try failed, too many missdetections */
-+    	//if ( size == 5 && get_u32(t,0) == __constant_htonl(1) && t[4] < 3) return (IPP2P_BIT * 100 + 3);
-+    	
-+    	/* second try: block request packets */
-+    	if ( plen == 17 && get_u32(payload,0) == __constant_htonl(0x0d) && payload[4] == 0x06 && get_u32(payload,13) == __constant_htonl(0x4000) ) return (IPP2P_BIT * 100 + 3);
-+    }
-+
-+    return 0;
-+}
-+
-+
-+
-+/*check for Kazaa get command*/
-+int
-+search_kazaa (const unsigned char *payload, const u16 plen)
-+
-+{
-+    if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a) && memcmp(payload, "GET /.hash=", 11) == 0)
-+	return (IPP2P_DATA_KAZAA * 100);
-+
-+    return 0;
-+}
-+
-+
-+/*check for gnutella get command*/
-+int
-+search_gnu (const unsigned char *payload, const u16 plen)
-+{
-+    if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a))
-+    {
-+	if (memcmp(payload, "GET /get/", 9) == 0)	return ((IPP2P_DATA_GNU * 100) + 1);
-+	if (memcmp(payload, "GET /uri-res/", 13) == 0) return ((IPP2P_DATA_GNU * 100) + 2); 
-+    }
-+    return 0;
-+}
-+
-+
-+/*check for gnutella get commands and other typical data*/
-+int
-+search_all_gnu (const unsigned char *payload, const u16 plen)
-+{
-+    
-+    if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a))
-+    {
-+	
-+	if (memcmp(payload, "GNUTELLA CONNECT/", 17) == 0) return ((IPP2P_GNU * 100) + 1);
-+	if (memcmp(payload, "GNUTELLA/", 9) == 0) return ((IPP2P_GNU * 100) + 2);    
-+    
-+    
-+	if ((memcmp(payload, "GET /get/", 9) == 0) || (memcmp(payload, "GET /uri-res/", 13) == 0))
-+	{        
-+		u16 c=8;
-+		const u16 end=plen-22;
-+		while (c < end) {
-+			if ( payload[c] == 0x0a && payload[c+1] == 0x0d && ((memcmp(&payload[c+2], "X-Gnutella-", 11) == 0) || (memcmp(&payload[c+2], "X-Queue:", 8) == 0))) 
-+				return ((IPP2P_GNU * 100) + 3);
-+			c++;
-+		}
-+	}
-+    }
-+    return 0;
-+}
-+
-+
-+/*check for KaZaA download commands and other typical data*/
-+int
-+search_all_kazaa (const unsigned char *payload, const u16 plen)
-+{
-+    if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a))
-+    {
-+
-+	if (memcmp(payload, "GIVE ", 5) == 0) return ((IPP2P_KAZAA * 100) + 1);
-+    
-+    	if (memcmp(payload, "GET /", 5) == 0) {
-+		u16 c = 8;
-+		const u16 end=plen-22;
-+		while (c < end) {
-+			if ( payload[c] == 0x0a && payload[c+1] == 0x0d && ((memcmp(&payload[c+2], "X-Kazaa-Username: ", 18) == 0) || (memcmp(&payload[c+2], "User-Agent: PeerEnabler/", 24) == 0)))
-+				return ((IPP2P_KAZAA * 100) + 2);
-+			c++;
-+		}
-+	}
-+    }
-+    return 0;
-+}
-+
-+/*fast check for edonkey file segment transfer command*/
-+int
-+search_edk (const unsigned char *payload, const u16 plen)
-+{
-+    if (payload[0] != 0xe3) 
-+	return 0;
-+    else {
-+	if (payload[5] == 0x47) 
-+	    return (IPP2P_DATA_EDK * 100);
-+	else 	
-+	    return 0;
-+    }
-+}
-+
-+
-+
-+/*intensive but slower search for some edonkey packets including size-check*/
-+int
-+search_all_edk (const unsigned char *payload, const u16 plen)
-+{
-+    if (payload[0] != 0xe3) 
-+	return 0;
-+    else {
-+	//t += head_len;	
-+	const u16 cmd = get_u16(payload, 1);
-+	if (cmd == (plen - 5)) {
-+	    switch (payload[5]) {
-+		case 0x01: return ((IPP2P_EDK * 100) + 1);	/*Client: hello or Server:hello*/
-+		case 0x4c: return ((IPP2P_EDK * 100) + 9);	/*Client: Hello-Answer*/
-+	    }
-+	}
-+	return 0;
-+     }
-+}
-+
-+
-+/*fast check for Direct Connect send command*/
-+int
-+search_dc (const unsigned char *payload, const u16 plen)
-+{
-+
-+    if (payload[0] != 0x24 ) 
-+	return 0;
-+    else {
-+	if (memcmp(&payload[1], "Send|", 5) == 0)
-+	    return (IPP2P_DATA_DC * 100);
-+	else
-+	    return 0;
-+    }	
-+
-+}
-+
-+
-+/*intensive but slower check for all direct connect packets*/
-+int
-+search_all_dc (const unsigned char *payload, const u16 plen)
-+{
-+//    unsigned char *t = haystack;
-+
-+    if (payload[0] == 0x24 && payload[plen-1] == 0x7c) 
-+    {
-+    	const unsigned char *t=&payload[1];
-+    		/* Client-Hub-Protocol */
-+	if (memcmp(t, "Lock ", 5) == 0)	 		return ((IPP2P_DC * 100) + 1);
-+	/* Client-Client-Protocol, some are already recognized by client-hub (like lock) */
-+	if (memcmp(t, "MyNick ", 7) == 0)	 	return ((IPP2P_DC * 100) + 38); 
-+    }
-+    return 0;
-+}
-+
-+/*check for mute*/
-+int
-+search_mute (const unsigned char *payload, const u16 plen)
-+{
-+	if ( plen == 209 || plen == 345 || plen == 473 || plen == 609 || plen == 1121 )
-+	{
-+		//printk(KERN_DEBUG "size hit: %u",size);
-+		if (memcmp(payload,"PublicKey: ",11) == 0 )
-+		{ 
-+			return ((IPP2P_MUTE * 100) + 0);
-+			
-+/*			if (memcmp(t+size-14,"\x0aEndPublicKey\x0a",14) == 0)
-+			{
-+				printk(KERN_DEBUG "end pubic key hit: %u",size);
-+				
-+			}*/
-+		}
-+	}
-+	return 0;
-+}
-+
-+
-+/* check for xdcc */
-+int
-+search_xdcc (const unsigned char *payload, const u16 plen)
-+{
-+	/* search in small packets only */
-+	if (plen > 20 && plen < 200 && payload[plen-1] == 0x0a && payload[plen-2] == 0x0d && memcmp(payload,"PRIVMSG ",8) == 0)
-+	{
-+		
-+		u16 x=10;
-+		const u16 end=plen - 13;
-+		
-+		/* is seems to be a irc private massage, chedck for xdcc command */
-+		while (x < end)
-+		{
-+			if (payload[x] == ':')
-+			{
-+				if ( memcmp(&payload[x+1],"xdcc send #",11) == 0 )
-+					return ((IPP2P_XDCC * 100) + 0);
-+			}
-+			x++;
-+		}
-+	}
-+	return 0;
-+}
-+
-+/* search for waste */
-+int search_waste(const unsigned char *payload, const u16 plen)
-+{
-+	if ( plen >= 8 && memcmp(payload,"GET.sha1:",9) == 0)
-+		return ((IPP2P_WASTE * 100) + 0);
-+
-+	return 0;
-+}
-+
-+
-+static struct {
-+    int command;
-+    __u8 short_hand;			/*for fucntions included in short hands*/
-+    int packet_len;
-+    int (*function_name) (const unsigned char *, const u16);
-+} matchlist[] = {
-+    {IPP2P_EDK,SHORT_HAND_IPP2P,20, &search_all_edk},
-+//    {IPP2P_DATA_KAZAA,SHORT_HAND_DATA,200, &search_kazaa},
-+//    {IPP2P_DATA_EDK,SHORT_HAND_DATA,60, &search_edk},
-+//    {IPP2P_DATA_DC,SHORT_HAND_DATA,26, &search_dc},
-+    {IPP2P_DC,SHORT_HAND_IPP2P,5, search_all_dc},
-+//    {IPP2P_DATA_GNU,SHORT_HAND_DATA,40, &search_gnu},
-+    {IPP2P_GNU,SHORT_HAND_IPP2P,5, &search_all_gnu},
-+    {IPP2P_KAZAA,SHORT_HAND_IPP2P,5, &search_all_kazaa},
-+    {IPP2P_BIT,SHORT_HAND_IPP2P,20, &search_bittorrent},
-+    {IPP2P_APPLE,SHORT_HAND_IPP2P,5, &search_apple},
-+    {IPP2P_SOUL,SHORT_HAND_IPP2P,5, &search_soul},
-+    {IPP2P_WINMX,SHORT_HAND_IPP2P,2, &search_winmx},
-+    {IPP2P_ARES,SHORT_HAND_IPP2P,5, &search_ares},
-+    {IPP2P_MUTE,SHORT_HAND_NONE,200, &search_mute},
-+    {IPP2P_WASTE,SHORT_HAND_NONE,5, &search_waste},
-+    {IPP2P_XDCC,SHORT_HAND_NONE,5, &search_xdcc},
-+    {0,0,0,NULL}
-+};
-+
-+
-+static struct {
-+    int command;
-+    __u8 short_hand;			/*for fucntions included in short hands*/
-+    int packet_len;
-+    int (*function_name) (unsigned char *, int);
-+} udp_list[] = {
-+    {IPP2P_KAZAA,SHORT_HAND_IPP2P,14, &udp_search_kazaa},
-+    {IPP2P_BIT,SHORT_HAND_IPP2P,23, &udp_search_bit},
-+    {IPP2P_GNU,SHORT_HAND_IPP2P,11, &udp_search_gnu},
-+    {IPP2P_EDK,SHORT_HAND_IPP2P,9, &udp_search_edk},
-+    {IPP2P_DC,SHORT_HAND_IPP2P,12, &udp_search_directconnect},    
-+    {0,0,0,NULL}
-+};
-+
-+
-+static int
-+match(const struct sk_buff *skb,
-+      const struct net_device *in,
-+      const struct net_device *out,
-+      const void *matchinfo,
-+      int offset,
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-+      const void *hdr,
-+      u_int16_t datalen,
-+#endif
-+
-+      int *hotdrop)
-+{
-+    const struct ipt_p2p_info *info = matchinfo;
-+    unsigned char  *haystack;
-+    struct iphdr *ip = skb->nh.iph;
-+    int p2p_result = 0, i = 0;
-+//    int head_len;
-+    int hlen = ntohs(ip->tot_len)-(ip->ihl*4);	/*hlen = packet-data length*/
-+
-+    /*must not be a fragment*/
-+    if (offset) {
-+	if (info->debug) printk("IPP2P.match: offset found %i \n",offset);
-+	return 0;
-+    }
-+    
-+    /*make sure that skb is linear*/
-+    if(skb_is_nonlinear(skb)){
-+	if (info->debug) printk("IPP2P.match: nonlinear skb found\n");
-+	return 0;
-+    }
-+
-+
-+    haystack=(char *)ip+(ip->ihl*4);		/*haystack = packet data*/
-+
-+    switch (ip->protocol){
-+	case IPPROTO_TCP:		/*what to do with a TCP packet*/
-+	{
-+	    struct tcphdr *tcph = (void *) ip + ip->ihl * 4;
-+	    
-+	    if (tcph->fin) return 0;  /*if FIN bit is set bail out*/
-+	    if (tcph->syn) return 0;  /*if SYN bit is set bail out*/
-+	    if (tcph->rst) return 0;  /*if RST bit is set bail out*/
-+	    
-+	    haystack += tcph->doff * 4; /*get TCP-Header-Size*/
-+	    hlen -= tcph->doff * 4;
-+	    while (matchlist[i].command) {
-+		if ((((info->cmd & matchlist[i].command) == matchlist[i].command) ||
-+		    ((info->cmd & matchlist[i].short_hand) == matchlist[i].short_hand)) &&
-+		    (hlen > matchlist[i].packet_len)) {
-+			    p2p_result = matchlist[i].function_name(haystack, hlen);
-+			    if (p2p_result) 
-+			    {
-+				if (info->debug) printk("IPP2P.debug:TCP-match: %i from: %u.%u.%u.%u:%i to: %u.%u.%u.%u:%i Length: %i\n", 
-+				    p2p_result, NIPQUAD(ip->saddr),ntohs(tcph->source), NIPQUAD(ip->daddr),ntohs(tcph->dest),hlen);
-+				return p2p_result;
-+    			    }
-+    		}
-+	    i++;
-+	    }
-+	    return p2p_result;
-+	}
-+	
-+	case IPPROTO_UDP:		/*what to do with an UDP packet*/
-+	{
-+	    struct udphdr *udph = (void *) ip + ip->ihl * 4;
-+	    
-+	    while (udp_list[i].command){
-+		if ((((info->cmd & udp_list[i].command) == udp_list[i].command) ||
-+		    ((info->cmd & udp_list[i].short_hand) == udp_list[i].short_hand)) &&
-+		    (hlen > udp_list[i].packet_len)) {
-+			    p2p_result = udp_list[i].function_name(haystack, hlen);
-+			    if (p2p_result){
-+				if (info->debug) printk("IPP2P.debug:UDP-match: %i from: %u.%u.%u.%u:%i to: %u.%u.%u.%u:%i Length: %i\n", 
-+				    p2p_result, NIPQUAD(ip->saddr),ntohs(udph->source), NIPQUAD(ip->daddr),ntohs(udph->dest),hlen);
-+				return p2p_result;
-+			    }
-+		}
-+	    i++;
-+	    }			
-+	    return p2p_result;
-+	}
-+    
-+	default: return 0;
-+    }
-+}
-+
-+
-+
-+static int
-+checkentry(const char *tablename,
-+            const struct ipt_ip *ip,
-+	    void *matchinfo,
-+	    unsigned int matchsize,
-+	    unsigned int hook_mask)
-+{
-+        /* Must specify -p tcp */
-+/*    if (ip->proto != IPPROTO_TCP || (ip->invflags & IPT_INV_PROTO)) {
-+ *	printk("ipp2p: Only works on TCP packets, use -p tcp\n");
-+ *	return 0;
-+ *    }*/
-+    return 1;
-+}
-+									    
-+
-+
-+
-+static struct ipt_match ipp2p_match = { 
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-+	{ NULL, NULL }, 
-+	"ipp2p", 
-+	&match, 
-+	&checkentry, 
-+	NULL, 
-+	THIS_MODULE
-+#endif
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+	.name		= "ipp2p",
-+	.match		= &match,
-+	.checkentry	= &checkentry,
-+	.me		= THIS_MODULE,
-+#endif
-+};
-+
-+
-+static int __init init(void)
-+{
-+    printk(KERN_INFO "IPP2P v%s loading\n", IPP2P_VERSION);
-+    return ipt_register_match(&ipp2p_match);
-+}
-+	
-+static void __exit fini(void)
-+{
-+    ipt_unregister_match(&ipp2p_match);
-+    printk(KERN_INFO "IPP2P v%s unloaded\n", IPP2P_VERSION);    
-+}
-+	
-+module_init(init);
-+module_exit(fini);
-+
-+
diff --git a/openwrt/target/linux/generic-2.4/patches/602-netfilter_layer7_2.1nbd.patch b/openwrt/target/linux/generic-2.4/patches/602-netfilter_layer7_2.1nbd.patch
deleted file mode 100644
index d67725d854..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/602-netfilter_layer7_2.1nbd.patch
+++ /dev/null
@@ -1,2083 +0,0 @@
-diff -urN linux.old/Documentation/Configure.help linux.dev/Documentation/Configure.help
---- linux.old/Documentation/Configure.help	2006-01-31 16:55:22.467939000 +0100
-+++ linux.dev/Documentation/Configure.help	2006-01-31 16:58:24.751331500 +0100
-@@ -29151,6 +29151,18 @@
-   
-   If unsure, say N.
- 
-+CONFIG_IP_NF_MATCH_LAYER7
-+   Say Y if you want to be able to classify connections (and their 
-+   packets) based on regular expression matching of their application 
-+   layer data.   This is one way to classify applications such as 
-+   peer-to-peer filesharing systems that do not always use the same 
-+   port.
-+
-+   To compile it as a module, choose M here.  If unsure, say N.
-+
-+CONFIG_IP_NF_MATCH_LAYER7_DEBUG
-+   Say Y to get lots of debugging output.
-+
- #
- # A couple of things I keep forgetting:
- #   capitalize: AppleTalk, Ethernet, DOS, DMA, FAT, FTP, Internet,
-diff -urN linux.old/include/linux/netfilter_ipv4/ip_conntrack.h linux.dev/include/linux/netfilter_ipv4/ip_conntrack.h
---- linux.old/include/linux/netfilter_ipv4/ip_conntrack.h	2005-11-16 20:12:54.000000000 +0100
-+++ linux.dev/include/linux/netfilter_ipv4/ip_conntrack.h	2006-01-31 16:58:24.775333000 +0100
-@@ -207,6 +207,17 @@
- 	} nat;
- #endif /* CONFIG_IP_NF_NAT_NEEDED */
- 
-+#if defined(CONFIG_IP_NF_MATCH_LAYER7) || defined(CONFIG_IP_NF_MATCH_LAYER7_MODULE)
-+	struct {
-+		unsigned int numpackets; /* surely this is kept track of somewhere else, right? I can't find it... */
-+		char * app_proto; /* "http", "ftp", etc.  NULL if unclassifed */
-+		
-+		/* the application layer data so far.  NULL if ->numpackets > numpackets */
-+		char * app_data; 
-+
-+		unsigned int app_data_len;
-+	} layer7;
-+#endif
- };
- 
- /* get master conntrack via master expectation */
-diff -urN linux.old/include/linux/netfilter_ipv4/ipt_layer7.h linux.dev/include/linux/netfilter_ipv4/ipt_layer7.h
---- linux.old/include/linux/netfilter_ipv4/ipt_layer7.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/linux/netfilter_ipv4/ipt_layer7.h	2006-01-31 19:29:03.774017500 +0100
-@@ -0,0 +1,27 @@
-+/* 
-+  By Matthew Strait <quadong@users.sf.net>, Dec 2003.
-+  http://l7-filter.sf.net
-+
-+  This program is free software; you can redistribute it and/or
-+  modify it under the terms of the GNU General Public License
-+  as published by the Free Software Foundation; either version
-+  2 of the License, or (at your option) any later version.
-+  http://www.gnu.org/licenses/gpl.txt
-+*/
-+
-+#ifndef _IPT_LAYER7_H
-+#define _IPT_LAYER7_H
-+
-+#define MAX_PATTERN_LEN 8192
-+#define MAX_PROTOCOL_LEN 256
-+
-+typedef char *(*proc_ipt_search) (char *, char, char *);
-+
-+struct ipt_layer7_info {
-+    char protocol[MAX_PROTOCOL_LEN];
-+    char invert:1;
-+    char pattern[MAX_PATTERN_LEN];
-+    char pkt;
-+};
-+
-+#endif /* _IPT_LAYER7_H */
-diff -urN linux.old/net/ipv4/netfilter/Config.in linux.dev/net/ipv4/netfilter/Config.in
---- linux.old/net/ipv4/netfilter/Config.in	2006-01-31 16:55:32.364558000 +0100
-+++ linux.dev/net/ipv4/netfilter/Config.in	2006-01-31 16:58:24.803334750 +0100
-@@ -44,6 +44,9 @@
-   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-     dep_tristate '  Unclean match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_UNCLEAN $CONFIG_IP_NF_IPTABLES
-     dep_tristate '  Owner match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_OWNER $CONFIG_IP_NF_IPTABLES
-+    dep_tristate '  Layer 7 match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_LAYER7 $CONFIG_IP_NF_CONNTRACK
-+    dep_mbool '  Layer 7 debugging output (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_LAYER7_DEBUG $CONFIG_IP_NF_MATCH_LAYER7
-+ 
-   fi
- # The targets
-   dep_tristate '  Packet filtering' CONFIG_IP_NF_FILTER $CONFIG_IP_NF_IPTABLES 
-diff -urN linux.old/net/ipv4/netfilter/Makefile linux.dev/net/ipv4/netfilter/Makefile
---- linux.old/net/ipv4/netfilter/Makefile	2006-01-31 16:55:32.372558000 +0100
-+++ linux.dev/net/ipv4/netfilter/Makefile	2006-01-31 16:58:24.803334750 +0100
-@@ -87,6 +87,7 @@
- obj-$(CONFIG_IP_NF_MATCH_CONNTRACK) += ipt_conntrack.o
- obj-$(CONFIG_IP_NF_MATCH_UNCLEAN) += ipt_unclean.o
- obj-$(CONFIG_IP_NF_MATCH_TCPMSS) += ipt_tcpmss.o
-+obj-$(CONFIG_IP_NF_MATCH_LAYER7) += ipt_layer7.o
- 
- # targets
- obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o
-diff -urN linux.old/net/ipv4/netfilter/ip_conntrack_core.c linux.dev/net/ipv4/netfilter/ip_conntrack_core.c
---- linux.old/net/ipv4/netfilter/ip_conntrack_core.c	2005-04-04 03:42:20.000000000 +0200
-+++ linux.dev/net/ipv4/netfilter/ip_conntrack_core.c	2006-01-31 16:58:24.811335250 +0100
-@@ -346,6 +346,14 @@
- 		}
- 		kfree(ct->master);
- 	}
-+
-+	#if defined(CONFIG_IP_NF_MATCH_LAYER7) || defined(CONFIG_IP_NF_MATCH_LAYER7_MODULE)
-+	if(ct->layer7.app_proto)
-+		kfree(ct->layer7.app_proto);
-+	if(ct->layer7.app_data)
-+		kfree(ct->layer7.app_data);
-+	#endif
-+	
- 	WRITE_UNLOCK(&ip_conntrack_lock);
- 
- 	if (master)
-diff -urN linux.old/net/ipv4/netfilter/ip_conntrack_standalone.c linux.dev/net/ipv4/netfilter/ip_conntrack_standalone.c
---- linux.old/net/ipv4/netfilter/ip_conntrack_standalone.c	2005-04-04 03:42:20.000000000 +0200
-+++ linux.dev/net/ipv4/netfilter/ip_conntrack_standalone.c	2006-01-31 16:58:24.815335500 +0100
-@@ -107,6 +107,13 @@
- 		len += sprintf(buffer + len, "[ASSURED] ");
- 	len += sprintf(buffer + len, "use=%u ",
- 		       atomic_read(&conntrack->ct_general.use));
-+
-+	#if defined(CONFIG_IP_NF_MATCH_LAYER7) || defined(CONFIG_IP_NF_MATCH_LAYER7_MODULE)
-+	if(conntrack->layer7.app_proto)
-+		len += sprintf(buffer + len, "l7proto=%s ",
-+				conntrack->layer7.app_proto); 
-+	#endif
-+
- 	len += sprintf(buffer + len, "\n");
- 
- 	return len;
-diff -urN linux.old/net/ipv4/netfilter/ipt_layer7.c linux.dev/net/ipv4/netfilter/ipt_layer7.c
---- linux.old/net/ipv4/netfilter/ipt_layer7.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/ipt_layer7.c	2006-01-31 19:31:38.591693000 +0100
-@@ -0,0 +1,595 @@
-+/* 
-+  Kernel module to match application layer (OSI layer 7) 
-+  data in connections.
-+  
-+  http://l7-filter.sf.net
-+
-+  By Matthew Strait and Ethan Sommer, 2003-2005.
-+
-+  This program is free software; you can redistribute it and/or
-+  modify it under the terms of the GNU General Public License
-+  as published by the Free Software Foundation; either version
-+  2 of the License, or (at your option) any later version.
-+  http://www.gnu.org/licenses/gpl.txt
-+
-+  Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>
-+  and cls_layer7.c (C) 2003 Matthew Strait, Ethan Sommer, Justin Levandoski
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_conntrack.h>
-+#include <linux/proc_fs.h>
-+#include <linux/ctype.h>
-+#include <net/ip.h>
-+#include <net/tcp.h>
-+#include <linux/netfilter_ipv4/lockhelp.h>
-+
-+#include "regexp/regexp.c"
-+
-+#include <linux/netfilter_ipv4/ipt_layer7.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+
-+MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("iptables application layer match module");
-+
-+static int maxdatalen = 2048; // this is the default
-+MODULE_PARM(maxdatalen,"i");
-+MODULE_PARM_DESC(maxdatalen,"maximum bytes of data looked at by l7-filter");
-+
-+#if defined(CONFIG_IP_NF_MATCH_LAYER7_DEBUG)
-+	#define DPRINTK(format,args...) printk(format,##args)
-+#else
-+	#define DPRINTK(format,args...)
-+#endif
-+
-+#define TOTAL_PACKETS master_conntrack->layer7.numpackets
-+
-+/* Number of packets whose data we look at.
-+This can be modified through /proc/net/layer7_numpackets */
-+static int num_packets = 10;
-+
-+static struct pattern_cache {
-+	char * regex_string;
-+	regexp * pattern;
-+	struct pattern_cache * next;
-+} * first_pattern_cache = NULL;
-+
-+/* I'm new to locking.  Here are my assumptions:
-+
-+- No one will write to /proc/net/layer7_numpackets over and over very fast; 
-+  if they did, nothing awful would happen.
-+
-+- This code will never be processing the same packet twice at the same time,
-+  because iptables rules are traversed in order.
-+
-+- It doesn't matter if two packets from different connections are in here at 
-+  the same time, because they don't share any data.
-+
-+- It _does_ matter if two packets from the same connection are here at the same
-+  time.  In this case, we have to protect the conntracks and the list of 
-+  compiled patterns.
-+*/
-+DECLARE_RWLOCK(ct_lock);
-+DECLARE_LOCK(list_lock);
-+
-+#if CONFIG_IP_NF_MATCH_LAYER7_DEBUG
-+/* Converts an unfriendly string into a friendly one by 
-+replacing unprintables with periods and all whitespace with " ". */
-+static char * friendly_print(unsigned char * s)
-+{
-+	char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
-+	int i;
-+
-+	if(!f) {
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: out of memory in friendly_print, bailing.\n");
-+		return NULL;
-+	}
-+
-+	for(i = 0; i < strlen(s); i++){
-+		if(isprint(s[i]) && s[i] < 128)	f[i] = s[i];
-+		else if(isspace(s[i]))		f[i] = ' ';
-+		else 				f[i] = '.';
-+	}
-+	f[i] = '\0';
-+	return f;
-+}
-+
-+static char dec2hex(int i)
-+{
-+	switch (i) {
-+		case 0 ... 9:
-+			return (char)(i + '0');
-+			break;
-+		case 10 ... 15:
-+			return (char)(i - 10 + 'a');
-+			break;
-+		default:
-+			if (net_ratelimit()) 
-+				printk("Problem in dec2hex\n");
-+			return '\0';
-+	}
-+}
-+
-+static char * hex_print(unsigned char * s)
-+{
-+	char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
-+	int i;
-+
-+	if(!g) {
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: out of memory in hex_print, bailing.\n");
-+		return NULL;
-+	}
-+
-+	for(i = 0; i < strlen(s); i++) {
-+		g[i*3    ] = dec2hex(s[i]/16);
-+		g[i*3 + 1] = dec2hex(s[i]%16);
-+		g[i*3 + 2] = ' ';
-+	}
-+	g[i*3] = '\0';
-+
-+	return g;
-+}
-+#endif // DEBUG
-+
-+/* Use instead of regcomp.  As we expect to be seeing the same regexps over and
-+over again, it make sense to cache the results. */
-+static regexp * compile_and_cache(char * regex_string, char * protocol) 
-+{
-+	struct pattern_cache * node               = first_pattern_cache;
-+	struct pattern_cache * last_pattern_cache = first_pattern_cache;
-+	struct pattern_cache * tmp;
-+	unsigned int len;
-+
-+	while (node != NULL) {
-+		if (!strcmp(node->regex_string, regex_string)) 
-+			return node->pattern;
-+
-+		last_pattern_cache = node;/* points at the last non-NULL node */
-+		node = node->next;
-+	}
-+
-+	/* If we reach the end of the list, then we have not yet cached
-+	   the pattern for this regex. Let's do that now. 
-+	   Be paranoid about running out of memory to avoid list corruption. */
-+	tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
-+
-+	if(!tmp) {
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: out of memory in compile_and_cache, bailing.\n");
-+		return NULL;
-+	}
-+
-+	tmp->regex_string  = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
-+	tmp->pattern       = kmalloc(sizeof(struct regexp),    GFP_ATOMIC);
-+	tmp->next = NULL;
-+
-+	if(!tmp->regex_string || !tmp->pattern) {
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: out of memory in compile_and_cache, bailing.\n");
-+		kfree(tmp->regex_string);
-+		kfree(tmp->pattern);
-+		kfree(tmp);
-+		return NULL;
-+	}
-+
-+	/* Ok.  The new node is all ready now. */
-+	node = tmp;
-+
-+	if(first_pattern_cache == NULL) /* list is empty */
-+		first_pattern_cache = node; /* make node the beginning */
-+	else
-+		last_pattern_cache->next = node; /* attach node to the end */
-+
-+	/* copy the string and compile the regex */
-+	len = strlen(regex_string);
-+	DPRINTK("About to compile this: \"%s\"\n", regex_string);
-+	node->pattern = regcomp(regex_string, &len);
-+	if ( !node->pattern ) {
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: Error compiling regexp \"%s\" (%s)\n", regex_string, protocol);
-+		/* pattern is now cached as NULL, so we won't try again. */
-+	}
-+
-+	strcpy(node->regex_string, regex_string);
-+	return node->pattern;
-+}
-+
-+static int can_handle(const struct sk_buff *skb)
-+{
-+	if(!skb->nh.iph) /* not IP */
-+		return 0;
-+	if(skb->nh.iph->protocol != IPPROTO_TCP &&
-+	   skb->nh.iph->protocol != IPPROTO_UDP &&
-+	   skb->nh.iph->protocol != IPPROTO_ICMP)
-+		return 0;
-+	return 1;
-+}
-+
-+/* Returns offset the into the skb->data that the application data starts */
-+static int app_data_offset(const struct sk_buff *skb)
-+{
-+	/* In case we are ported somewhere (ebtables?) where skb->nh.iph 
-+	isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
-+	int ip_hl = 4*skb->nh.iph->ihl;
-+
-+	if( skb->nh.iph->protocol == IPPROTO_TCP ) {
-+		/* 12 == offset into TCP header for the header length field. 
-+		Can't get this with skb->h.th->doff because the tcphdr 
-+		struct doesn't get set when routing (this is confirmed to be 
-+		true in Netfilter as well as QoS.) */
-+		int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
-+
-+		return ip_hl + tcp_hl;
-+	} else if( skb->nh.iph->protocol == IPPROTO_UDP  ) {
-+		return ip_hl + 8; /* UDP header is always 8 bytes */
-+	} else if( skb->nh.iph->protocol == IPPROTO_ICMP ) {
-+		return ip_hl + 8; /* ICMP header is 8 bytes */
-+	} else {
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: tried to handle unknown protocol!\n");
-+		return ip_hl + 8; /* something reasonable */
-+	}
-+}
-+
-+/* handles whether there's a match when we aren't appending data anymore */
-+static int match_no_append(struct ip_conntrack * conntrack, struct ip_conntrack * master_conntrack,
-+			enum ip_conntrack_info ctinfo, enum ip_conntrack_info master_ctinfo,
-+			struct ipt_layer7_info * info)
-+{
-+	/* If we're in here, throw the app data away */
-+	WRITE_LOCK(&ct_lock);
-+	if(master_conntrack->layer7.app_data != NULL) {
-+
-+	#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
-+		if(!master_conntrack->layer7.app_proto) {
-+			char * f = friendly_print(master_conntrack->layer7.app_data);
-+			char * g = hex_print(master_conntrack->layer7.app_data);
-+			DPRINTK("\nl7-filter gave up after %d bytes (%d packets):\n%s\n",
-+				strlen(f), 
-+				TOTAL_PACKETS, f);
-+			kfree(f); 
-+			DPRINTK("In hex: %s\n", g);
-+			kfree(g);
-+		}
-+	#endif
-+
-+		kfree(master_conntrack->layer7.app_data);
-+		master_conntrack->layer7.app_data = NULL; /* don't free again */
-+	}
-+	WRITE_UNLOCK(&ct_lock);
-+
-+	if(master_conntrack->layer7.app_proto){
-+		/* Here child connections set their .app_proto (for /proc/net/ip_conntrack) */
-+		WRITE_LOCK(&ct_lock);
-+		if(!conntrack->layer7.app_proto) {
-+			conntrack->layer7.app_proto = kmalloc(strlen(master_conntrack->layer7.app_proto)+1, GFP_ATOMIC);
-+			if(!conntrack->layer7.app_proto){
-+				if (net_ratelimit()) 
-+					printk(KERN_ERR "layer7: out of memory in match_no_append, bailing.\n");
-+				WRITE_UNLOCK(&ct_lock);
-+				return 1;
-+			}
-+			strcpy(conntrack->layer7.app_proto, master_conntrack->layer7.app_proto);
-+		}
-+		WRITE_UNLOCK(&ct_lock);
-+	
-+		return (!strcmp(master_conntrack->layer7.app_proto, info->protocol));
-+	}
-+	else {
-+		/* If not classified, set to "unknown" to distinguish from 
-+		connections that are still being tested. */
-+		WRITE_LOCK(&ct_lock);
-+		master_conntrack->layer7.app_proto = kmalloc(strlen("unknown")+1, GFP_ATOMIC);
-+		if(!master_conntrack->layer7.app_proto){
-+			if (net_ratelimit()) 
-+				printk(KERN_ERR "layer7: out of memory in match_no_append, bailing.\n");
-+			WRITE_UNLOCK(&ct_lock);
-+			return 1;
-+		}
-+		strcpy(master_conntrack->layer7.app_proto, "unknown");
-+		WRITE_UNLOCK(&ct_lock);
-+		return 0;
-+	}
-+}
-+
-+static int add_datastr(char *target, int offset, char *app_data, int len)
-+{
-+	int length = 0, i;
-+
-+	/* Strip nulls. Make everything lower case (our regex lib doesn't
-+	do case insensitivity).  Add it to the end of the current data. */
-+	for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
-+		if(app_data[i] != '\0') {
-+ 			target[length+offset] = 
-+				/* the kernel version of tolower mungs 'upper ascii' */
-+				isascii(app_data[i])? tolower(app_data[i]) : app_data[i];
-+			length++;
-+		}
-+	}
-+
-+	target[length+offset] = '\0';
-+
-+	return length;
-+}
-+
-+/* add the new app data to the conntrack.  Return number of bytes added. */
-+static int add_data(struct ip_conntrack * master_conntrack, 
-+			char * app_data, int appdatalen)
-+{
-+	int length;
-+	
-+	length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
-+	master_conntrack->layer7.app_data_len += length;
-+
-+	return length;
-+}
-+
-+/* Returns true on match and false otherwise.  */
-+static int match(/* const */struct sk_buff *skb, const struct net_device *in,
-+		 const struct net_device *out, const void *matchinfo,
-+		 int offset,		   int *hotdrop)
-+{
-+	struct ipt_layer7_info * info = (struct ipt_layer7_info *)matchinfo;
-+	enum ip_conntrack_info master_ctinfo, ctinfo;
-+	struct ip_conntrack *master_conntrack, *conntrack;
-+	unsigned char *app_data, *tmp_data;  
-+	unsigned int pattern_result, appdatalen;
-+	regexp * comppattern;
-+
-+	if(!can_handle(skb)){
-+		DPRINTK("layer7: This is some protocol I can't handle.\n");
-+		return info->invert;
-+	}
-+
-+	/* Treat the parent and all its children together as one connection, 
-+	except for the purpose of setting conntrack->layer7.app_proto in the 
-+	actual connection. This makes /proc/net/ip_conntrack somewhat more 
-+	satisfying. */
-+	if(!(conntrack	= ip_conntrack_get((struct sk_buff *)skb, &ctinfo)) ||
-+	   !(master_conntrack = ip_conntrack_get((struct sk_buff *)skb, &master_ctinfo))) {
-+		DPRINTK("layer7: packet is not from a known connection, giving up.\n");
-+		return info->invert;
-+	}
-+	
-+	/* Try to get a master conntrack (and its master etc) for FTP, etc. */
-+	while (master_ct(master_conntrack) != NULL)
-+		master_conntrack = master_ct(master_conntrack);
-+
-+	if(!skb->cb[0]){
-+		WRITE_LOCK(&ct_lock);
-+		master_conntrack->layer7.numpackets++;/*starts at 0 via memset*/
-+		WRITE_UNLOCK(&ct_lock);
-+	}
-+
-+	/* if we've classified it or seen too many packets */
-+	if(!info->pkt && (TOTAL_PACKETS > num_packets || 
-+		master_conntrack->layer7.app_proto)) {
-+	
-+		pattern_result = match_no_append(conntrack, master_conntrack, ctinfo, master_ctinfo, info);
-+	
-+		/* skb->cb[0] == seen. Avoid doing things twice if there are two l7 
-+		rules. I'm not sure that using cb for this purpose is correct, although
-+		it says "put your private variables there". But it doesn't look like it
-+		is being used for anything else in the skbs that make it here. How can
-+		I write to cb without making the compiler angry? */
-+		skb->cb[0] = 1; /* marking it seen here is probably irrelevant, but consistant */
-+
-+		return (pattern_result ^ info->invert);
-+	}
-+
-+	if(skb_is_nonlinear(skb)){
-+		if(skb_linearize(skb, GFP_ATOMIC) != 0){
-+			if (net_ratelimit()) 
-+				printk(KERN_ERR "layer7: failed to linearize packet, bailing.\n");
-+			return info->invert;
-+		}
-+	}
-+	
-+	/* now that the skb is linearized, it's safe to set these. */
-+	app_data = skb->data + app_data_offset(skb);
-+	appdatalen = skb->tail - app_data;
-+
-+	LOCK_BH(&list_lock);
-+	/* the return value gets checked later, when we're ready to use it */
-+	comppattern = compile_and_cache(info->pattern, info->protocol);
-+	UNLOCK_BH(&list_lock);
-+
-+	if (info->pkt) {
-+		tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
-+		if(!tmp_data){
-+			if (net_ratelimit())
-+				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
-+			return info->invert;
-+		}
-+		
-+		tmp_data[0] = '\0';
-+		add_datastr(tmp_data, 0, app_data, appdatalen);
-+		pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
-+		kfree(tmp_data);
-+		tmp_data = NULL;
-+		
-+		return (pattern_result ^ info->invert);
-+	}
-+	
-+	/* On the first packet of a connection, allocate space for app data */
-+	WRITE_LOCK(&ct_lock);
-+	if(TOTAL_PACKETS == 1 && !skb->cb[0] && !master_conntrack->layer7.app_data) {
-+		master_conntrack->layer7.app_data = kmalloc(maxdatalen, GFP_ATOMIC);
-+		if(!master_conntrack->layer7.app_data){
-+			if (net_ratelimit())
-+				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
-+			WRITE_UNLOCK(&ct_lock);
-+			return info->invert;
-+		}
-+
-+		master_conntrack->layer7.app_data[0] = '\0';
-+	}
-+	WRITE_UNLOCK(&ct_lock);
-+
-+	/* Can be here, but unallocated, if numpackets is increased near 
-+	the beginning of a connection */
-+	if(master_conntrack->layer7.app_data == NULL)
-+		return (info->invert); /* unmatched */
-+
-+	if(!skb->cb[0]){
-+		int newbytes;
-+		WRITE_LOCK(&ct_lock);
-+		newbytes = add_data(master_conntrack, app_data, appdatalen);
-+		WRITE_UNLOCK(&ct_lock);
-+
-+		if(newbytes == 0) { /* didn't add any data */
-+			skb->cb[0] = 1;
-+			/* Didn't match before, not going to match now */
-+			return info->invert;
-+		}
-+	}
-+
-+	/* If looking for "unknown", then never match.  "Unknown" means that
-+	we've given up; we're still trying with these packets. */
-+	if(!strcmp(info->protocol, "unknown")) {
-+		pattern_result = 0;
-+	/* If the regexp failed to compile, don't bother running it */
-+	} else if(comppattern && regexec(comppattern, master_conntrack->layer7.app_data)) {
-+		DPRINTK("layer7: regexec positive: %s!\n", info->protocol);
-+		pattern_result = 1;
-+	} else pattern_result = 0;
-+
-+	if(pattern_result) {
-+		WRITE_LOCK(&ct_lock);
-+		master_conntrack->layer7.app_proto = kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
-+		if(!master_conntrack->layer7.app_proto){
-+			if (net_ratelimit()) 
-+				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
-+			WRITE_UNLOCK(&ct_lock);
-+			return (pattern_result ^ info->invert);
-+		}
-+		strcpy(master_conntrack->layer7.app_proto, info->protocol);
-+		WRITE_UNLOCK(&ct_lock);
-+	}
-+
-+	/* mark the packet seen */
-+	skb->cb[0] = 1;
-+
-+	return (pattern_result ^ info->invert);
-+}
-+
-+static int checkentry(const char *tablename, const struct ipt_ip *ip,
-+	   void *matchinfo, unsigned int matchsize, unsigned int hook_mask)
-+{
-+	if (matchsize != IPT_ALIGN(sizeof(struct ipt_layer7_info))) 
-+		return 0;
-+	return 1;
-+}
-+
-+static struct ipt_match layer7_match = { 
-+	.name = "layer7", 
-+	.match = &match, 
-+	.checkentry = &checkentry, 
-+	.me = THIS_MODULE 
-+};
-+
-+/* taken from drivers/video/modedb.c */
-+static int my_atoi(const char *s)
-+{
-+	int val = 0;
-+
-+	for (;; s++) {
-+		switch (*s) {
-+		case '0'...'9':
-+			val = 10*val+(*s-'0');
-+			break;
-+		default:
-+			return val;
-+		}
-+	}
-+}
-+
-+/* write out num_packets to userland. */
-+static int layer7_read_proc(char* page, char ** start, off_t off, int count, 
-+		     int* eof, void * data) 
-+{
-+	if(num_packets > 99 && net_ratelimit()) 
-+		printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
-+	
-+	page[0] = num_packets/10 + '0';
-+	page[1] = num_packets%10 + '0';
-+	page[2] = '\n';
-+	page[3] = '\0';
-+		
-+	*eof=1;
-+
-+	return 3;
-+}
-+
-+/* Read in num_packets from userland */
-+static int layer7_write_proc(struct file* file, const char* buffer, 
-+		      unsigned long count, void *data) 
-+{
-+	char * foo = kmalloc(count, GFP_ATOMIC);
-+
-+	if(!foo){
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: out of memory, bailing. num_packets unchanged.\n");
-+		return count;
-+	}
-+
-+	copy_from_user(foo, buffer, count);
-+
-+	num_packets = my_atoi(foo);
-+	kfree (foo);
-+
-+	/* This has an arbitrary limit to make the math easier. I'm lazy. 
-+	But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
-+	if(num_packets > 99) {
-+		printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
-+		num_packets = 99;
-+	} else if(num_packets < 1) {
-+		printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
-+		num_packets = 1;
-+	}
-+	
-+	return count;
-+}
-+
-+/* register the proc file */
-+static void layer7_init_proc(void)
-+{
-+	struct proc_dir_entry* entry;
-+	entry = create_proc_entry("layer7_numpackets", 0644, proc_net);
-+	entry->read_proc = layer7_read_proc;
-+	entry->write_proc = layer7_write_proc;
-+}
-+
-+static void layer7_cleanup_proc(void)
-+{
-+	remove_proc_entry("layer7_numpackets", proc_net);
-+}
-+
-+static int __init init(void)
-+{
-+	layer7_init_proc();
-+	if(maxdatalen < 1) {
-+		printk(KERN_WARNING "layer7: maxdatalen can't be < 1, using 1\n");
-+		maxdatalen = 1;
-+	}
-+	/* This is not a hard limit.  It's just here to prevent people from     
-+	bringing their slow machines to a grinding halt. */
-+	else if(maxdatalen > 65536) {
-+		printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, using 65536\n");
-+		maxdatalen = 65536;             
-+	}
-+	return ipt_register_match(&layer7_match);
-+}
-+
-+static void __exit fini(void)
-+{
-+	layer7_cleanup_proc();
-+	ipt_unregister_match(&layer7_match);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux.old/net/ipv4/netfilter/regexp/regexp.c linux.dev/net/ipv4/netfilter/regexp/regexp.c
---- linux.old/net/ipv4/netfilter/regexp/regexp.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/regexp/regexp.c	2006-01-31 16:58:24.819335750 +0100
-@@ -0,0 +1,1195 @@
-+/*
-+ * regcomp and regexec -- regsub and regerror are elsewhere
-+ * @(#)regexp.c	1.3 of 18 April 87
-+ *
-+ *	Copyright (c) 1986 by University of Toronto.
-+ *	Written by Henry Spencer.  Not derived from licensed software.
-+ *
-+ *	Permission is granted to anyone to use this software for any
-+ *	purpose on any computer system, and to redistribute it freely,
-+ *	subject to the following restrictions:
-+ *
-+ *	1. The author is not responsible for the consequences of use of
-+ *		this software, no matter how awful, even if they arise
-+ *		from defects in it.
-+ *
-+ *	2. The origin of this software must not be misrepresented, either
-+ *		by explicit claim or by omission.
-+ *
-+ *	3. Altered versions must be plainly marked as such, and must not
-+ *		be misrepresented as being the original software.
-+ *
-+ * Beware that some of this code is subtly aware of the way operator
-+ * precedence is structured in regular expressions.  Serious changes in
-+ * regular-expression syntax might require a total rethink.
-+ *
-+ * This code was modified by Ethan Sommer to work within the kernel
-+ * (it now uses kmalloc etc..)
-+ * 
-+ * Modified slightly by Matthew Strait to use more modern C.
-+ */
-+
-+#include "regexp.h"
-+#include "regmagic.h"
-+
-+/* added by ethan and matt.  Lets it work in both kernel and user space.
-+(So iptables can use it, for instance.)  Yea, it goes both ways... */
-+#if __KERNEL__
-+  #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
-+#else
-+  #define printk(format,args...) printf(format,##args)
-+#endif
-+
-+void regerror(char * s)
-+{
-+        printk("<3>Regexp: %s\n", s);
-+        /* NOTREACHED */
-+}
-+
-+/*
-+ * The "internal use only" fields in regexp.h are present to pass info from
-+ * compile to execute that permits the execute phase to run lots faster on
-+ * simple cases.  They are:
-+ *
-+ * regstart	char that must begin a match; '\0' if none obvious
-+ * reganch	is the match anchored (at beginning-of-line only)?
-+ * regmust	string (pointer into program) that match must include, or NULL
-+ * regmlen	length of regmust string
-+ *
-+ * Regstart and reganch permit very fast decisions on suitable starting points
-+ * for a match, cutting down the work a lot.  Regmust permits fast rejection
-+ * of lines that cannot possibly match.  The regmust tests are costly enough
-+ * that regcomp() supplies a regmust only if the r.e. contains something
-+ * potentially expensive (at present, the only such thing detected is * or +
-+ * at the start of the r.e., which can involve a lot of backup).  Regmlen is
-+ * supplied because the test in regexec() needs it and regcomp() is computing
-+ * it anyway.
-+ */
-+
-+/*
-+ * Structure for regexp "program".  This is essentially a linear encoding
-+ * of a nondeterministic finite-state machine (aka syntax charts or
-+ * "railroad normal form" in parsing technology).  Each node is an opcode
-+ * plus a "next" pointer, possibly plus an operand.  "Next" pointers of
-+ * all nodes except BRANCH implement concatenation; a "next" pointer with
-+ * a BRANCH on both ends of it is connecting two alternatives.  (Here we
-+ * have one of the subtle syntax dependencies:  an individual BRANCH (as
-+ * opposed to a collection of them) is never concatenated with anything
-+ * because of operator precedence.)  The operand of some types of node is
-+ * a literal string; for others, it is a node leading into a sub-FSM.  In
-+ * particular, the operand of a BRANCH node is the first node of the branch.
-+ * (NB this is *not* a tree structure:  the tail of the branch connects
-+ * to the thing following the set of BRANCHes.)  The opcodes are:
-+ */
-+
-+/* definition	number	opnd?	meaning */
-+#define	END	0	/* no	End of program. */
-+#define	BOL	1	/* no	Match "" at beginning of line. */
-+#define	EOL	2	/* no	Match "" at end of line. */
-+#define	ANY	3	/* no	Match any one character. */
-+#define	ANYOF	4	/* str	Match any character in this string. */
-+#define	ANYBUT	5	/* str	Match any character not in this string. */
-+#define	BRANCH	6	/* node	Match this alternative, or the next... */
-+#define	BACK	7	/* no	Match "", "next" ptr points backward. */
-+#define	EXACTLY	8	/* str	Match this string. */
-+#define	NOTHING	9	/* no	Match empty string. */
-+#define	STAR	10	/* node	Match this (simple) thing 0 or more times. */
-+#define	PLUS	11	/* node	Match this (simple) thing 1 or more times. */
-+#define	OPEN	20	/* no	Mark this point in input as start of #n. */
-+			/*	OPEN+1 is number 1, etc. */
-+#define	CLOSE	30	/* no	Analogous to OPEN. */
-+
-+/*
-+ * Opcode notes:
-+ *
-+ * BRANCH	The set of branches constituting a single choice are hooked
-+ *		together with their "next" pointers, since precedence prevents
-+ *		anything being concatenated to any individual branch.  The
-+ *		"next" pointer of the last BRANCH in a choice points to the
-+ *		thing following the whole choice.  This is also where the
-+ *		final "next" pointer of each individual branch points; each
-+ *		branch starts with the operand node of a BRANCH node.
-+ *
-+ * BACK		Normal "next" pointers all implicitly point forward; BACK
-+ *		exists to make loop structures possible.
-+ *
-+ * STAR,PLUS	'?', and complex '*' and '+', are implemented as circular
-+ *		BRANCH structures using BACK.  Simple cases (one character
-+ *		per match) are implemented with STAR and PLUS for speed
-+ *		and to minimize recursive plunges.
-+ *
-+ * OPEN,CLOSE	...are numbered at compile time.
-+ */
-+
-+/*
-+ * A node is one char of opcode followed by two chars of "next" pointer.
-+ * "Next" pointers are stored as two 8-bit pieces, high order first.  The
-+ * value is a positive offset from the opcode of the node containing it.
-+ * An operand, if any, simply follows the node.  (Note that much of the
-+ * code generation knows about this implicit relationship.)
-+ *
-+ * Using two bytes for the "next" pointer is vast overkill for most things,
-+ * but allows patterns to get big without disasters.
-+ */
-+#define	OP(p)	(*(p))
-+#define	NEXT(p)	(((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
-+#define	OPERAND(p)	((p) + 3)
-+
-+/*
-+ * See regmagic.h for one further detail of program structure.
-+ */
-+
-+
-+/*
-+ * Utility definitions.
-+ */
-+#ifndef CHARBITS
-+#define	UCHARAT(p)	((int)*(unsigned char *)(p))
-+#else
-+#define	UCHARAT(p)	((int)*(p)&CHARBITS)
-+#endif
-+
-+#define	FAIL(m)	{ regerror(m); return(NULL); }
-+#define	ISMULT(c)	((c) == '*' || (c) == '+' || (c) == '?')
-+#define	META	"^$.[()|?+*\\"
-+
-+/*
-+ * Flags to be passed up and down.
-+ */
-+#define	HASWIDTH	01	/* Known never to match null string. */
-+#define	SIMPLE		02	/* Simple enough to be STAR/PLUS operand. */
-+#define	SPSTART		04	/* Starts with * or +. */
-+#define	WORST		0	/* Worst case. */
-+
-+/*
-+ * Global work variables for regcomp().
-+ */
-+static char *regparse;		/* Input-scan pointer. */
-+static int regnpar;		/* () count. */
-+static char regdummy;
-+static char *regcode;		/* Code-emit pointer; &regdummy = don't. */
-+static long regsize;		/* Code size. */
-+
-+/*
-+ * Forward declarations for regcomp()'s friends.
-+ */
-+#ifndef STATIC
-+#define	STATIC	static
-+#endif
-+STATIC char *reg(int paren,int *flagp);
-+STATIC char *regbranch(int *flagp);
-+STATIC char *regpiece(int *flagp);
-+STATIC char *regatom(int *flagp);
-+STATIC char *regnode(char op);
-+STATIC char *regnext(char *p);
-+STATIC void regc(char b);
-+STATIC void reginsert(char op, char *opnd);
-+STATIC void regtail(char *p, char *val);
-+STATIC void regoptail(char *p, char *val);
-+
-+
-+__kernel_size_t my_strcspn(const char *s1,const char *s2)
-+{
-+        char *scan1;
-+        char *scan2;
-+        int count;
-+
-+        count = 0;
-+        for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
-+                for (scan2 = (char *)s2; *scan2 != '\0';)       /* ++ moved down. */
-+                        if (*scan1 == *scan2++)
-+                                return(count);
-+                count++;
-+        }
-+        return(count);
-+}
-+
-+/*
-+ - regcomp - compile a regular expression into internal code
-+ *
-+ * We can't allocate space until we know how big the compiled form will be,
-+ * but we can't compile it (and thus know how big it is) until we've got a
-+ * place to put the code.  So we cheat:  we compile it twice, once with code
-+ * generation turned off and size counting turned on, and once "for real".
-+ * This also means that we don't allocate space until we are sure that the
-+ * thing really will compile successfully, and we never have to move the
-+ * code and thus invalidate pointers into it.  (Note that it has to be in
-+ * one piece because free() must be able to free it all.)
-+ *
-+ * Beware that the optimization-preparation code in here knows about some
-+ * of the structure of the compiled regexp.
-+ */
-+regexp *
-+regcomp(char *exp,int *patternsize)
-+{
-+	register regexp *r;
-+	register char *scan;
-+	register char *longest;
-+	register int len;
-+	int flags;
-+	/* commented out by ethan
-+	   extern char *malloc();
-+	*/
-+
-+	if (exp == NULL)
-+		FAIL("NULL argument");
-+
-+	/* First pass: determine size, legality. */
-+	regparse = exp;
-+	regnpar = 1;
-+	regsize = 0L;
-+	regcode = &regdummy;
-+	regc(MAGIC);
-+	if (reg(0, &flags) == NULL)
-+		return(NULL);
-+
-+	/* Small enough for pointer-storage convention? */
-+	if (regsize >= 32767L)		/* Probably could be 65535L. */
-+		FAIL("regexp too big");
-+
-+	/* Allocate space. */
-+	*patternsize=sizeof(regexp) + (unsigned)regsize;
-+	r = (regexp *)malloc(sizeof(regexp) + (unsigned)regsize);
-+	if (r == NULL)
-+		FAIL("out of space");
-+
-+	/* Second pass: emit code. */
-+	regparse = exp;
-+	regnpar = 1;
-+	regcode = r->program;
-+	regc(MAGIC);
-+	if (reg(0, &flags) == NULL)
-+		return(NULL);
-+
-+	/* Dig out information for optimizations. */
-+	r->regstart = '\0';	/* Worst-case defaults. */
-+	r->reganch = 0;
-+	r->regmust = NULL;
-+	r->regmlen = 0;
-+	scan = r->program+1;			/* First BRANCH. */
-+	if (OP(regnext(scan)) == END) {		/* Only one top-level choice. */
-+		scan = OPERAND(scan);
-+
-+		/* Starting-point info. */
-+		if (OP(scan) == EXACTLY)
-+			r->regstart = *OPERAND(scan);
-+		else if (OP(scan) == BOL)
-+			r->reganch++;
-+
-+		/*
-+		 * If there's something expensive in the r.e., find the
-+		 * longest literal string that must appear and make it the
-+		 * regmust.  Resolve ties in favor of later strings, since
-+		 * the regstart check works with the beginning of the r.e.
-+		 * and avoiding duplication strengthens checking.  Not a
-+		 * strong reason, but sufficient in the absence of others.
-+		 */
-+		if (flags&SPSTART) {
-+			longest = NULL;
-+			len = 0;
-+			for (; scan != NULL; scan = regnext(scan))
-+				if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
-+					longest = OPERAND(scan);
-+					len = strlen(OPERAND(scan));
-+				}
-+			r->regmust = longest;
-+			r->regmlen = len;
-+		}
-+	}
-+
-+	return(r);
-+}
-+
-+/*
-+ - reg - regular expression, i.e. main body or parenthesized thing
-+ *
-+ * Caller must absorb opening parenthesis.
-+ *
-+ * Combining parenthesis handling with the base level of regular expression
-+ * is a trifle forced, but the need to tie the tails of the branches to what
-+ * follows makes it hard to avoid.
-+ */
-+static char *
-+reg(int paren, int *flagp /* Parenthesized? */ )
-+{
-+	register char *ret;
-+	register char *br;
-+	register char *ender;
-+	register int parno = 0; /* 0 makes gcc happy */
-+	int flags;
-+
-+	*flagp = HASWIDTH;	/* Tentatively. */
-+
-+	/* Make an OPEN node, if parenthesized. */
-+	if (paren) {
-+		if (regnpar >= NSUBEXP)
-+			FAIL("too many ()");
-+		parno = regnpar;
-+		regnpar++;
-+		ret = regnode(OPEN+parno);
-+	} else
-+		ret = NULL;
-+
-+	/* Pick up the branches, linking them together. */
-+	br = regbranch(&flags);
-+	if (br == NULL)
-+		return(NULL);
-+	if (ret != NULL)
-+		regtail(ret, br);	/* OPEN -> first. */
-+	else
-+		ret = br;
-+	if (!(flags&HASWIDTH))
-+		*flagp &= ~HASWIDTH;
-+	*flagp |= flags&SPSTART;
-+	while (*regparse == '|') {
-+		regparse++;
-+		br = regbranch(&flags);
-+		if (br == NULL)
-+			return(NULL);
-+		regtail(ret, br);	/* BRANCH -> BRANCH. */
-+		if (!(flags&HASWIDTH))
-+			*flagp &= ~HASWIDTH;
-+		*flagp |= flags&SPSTART;
-+	}
-+
-+	/* Make a closing node, and hook it on the end. */
-+	ender = regnode((paren) ? CLOSE+parno : END);	
-+	regtail(ret, ender);
-+
-+	/* Hook the tails of the branches to the closing node. */
-+	for (br = ret; br != NULL; br = regnext(br))
-+		regoptail(br, ender);
-+
-+	/* Check for proper termination. */
-+	if (paren && *regparse++ != ')') {
-+		FAIL("unmatched ()");
-+	} else if (!paren && *regparse != '\0') {
-+		if (*regparse == ')') {
-+			FAIL("unmatched ()");
-+		} else
-+			FAIL("junk on end");	/* "Can't happen". */
-+		/* NOTREACHED */
-+	}
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regbranch - one alternative of an | operator
-+ *
-+ * Implements the concatenation operator.
-+ */
-+static char *
-+regbranch(int *flagp)
-+{
-+	register char *ret;
-+	register char *chain;
-+	register char *latest;
-+	int flags;
-+
-+	*flagp = WORST;		/* Tentatively. */
-+
-+	ret = regnode(BRANCH);
-+	chain = NULL;
-+	while (*regparse != '\0' && *regparse != '|' && *regparse != ')') {
-+		latest = regpiece(&flags);
-+		if (latest == NULL)
-+			return(NULL);
-+		*flagp |= flags&HASWIDTH;
-+		if (chain == NULL)	/* First piece. */
-+			*flagp |= flags&SPSTART;
-+		else
-+			regtail(chain, latest);
-+		chain = latest;
-+	}
-+	if (chain == NULL)	/* Loop ran zero times. */
-+		(void) regnode(NOTHING);
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regpiece - something followed by possible [*+?]
-+ *
-+ * Note that the branching code sequences used for ? and the general cases
-+ * of * and + are somewhat optimized:  they use the same NOTHING node as
-+ * both the endmarker for their branch list and the body of the last branch.
-+ * It might seem that this node could be dispensed with entirely, but the
-+ * endmarker role is not redundant.
-+ */
-+static char *
-+regpiece(int *flagp)
-+{
-+	register char *ret;
-+	register char op;
-+	register char *next;
-+	int flags;
-+
-+	ret = regatom(&flags);
-+	if (ret == NULL)
-+		return(NULL);
-+
-+	op = *regparse;
-+	if (!ISMULT(op)) {
-+		*flagp = flags;
-+		return(ret);
-+	}
-+
-+	if (!(flags&HASWIDTH) && op != '?')
-+		FAIL("*+ operand could be empty");
-+	*flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
-+
-+	if (op == '*' && (flags&SIMPLE))
-+		reginsert(STAR, ret);
-+	else if (op == '*') {
-+		/* Emit x* as (x&|), where & means "self". */
-+		reginsert(BRANCH, ret);			/* Either x */
-+		regoptail(ret, regnode(BACK));		/* and loop */
-+		regoptail(ret, ret);			/* back */
-+		regtail(ret, regnode(BRANCH));		/* or */
-+		regtail(ret, regnode(NOTHING));		/* null. */
-+	} else if (op == '+' && (flags&SIMPLE))
-+		reginsert(PLUS, ret);
-+	else if (op == '+') {
-+		/* Emit x+ as x(&|), where & means "self". */
-+		next = regnode(BRANCH);			/* Either */
-+		regtail(ret, next);
-+		regtail(regnode(BACK), ret);		/* loop back */
-+		regtail(next, regnode(BRANCH));		/* or */
-+		regtail(ret, regnode(NOTHING));		/* null. */
-+	} else if (op == '?') {
-+		/* Emit x? as (x|) */
-+		reginsert(BRANCH, ret);			/* Either x */
-+		regtail(ret, regnode(BRANCH));		/* or */
-+		next = regnode(NOTHING);		/* null. */
-+		regtail(ret, next);
-+		regoptail(ret, next);
-+	}
-+	regparse++;
-+	if (ISMULT(*regparse))
-+		FAIL("nested *?+");
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regatom - the lowest level
-+ *
-+ * Optimization:  gobbles an entire sequence of ordinary characters so that
-+ * it can turn them into a single node, which is smaller to store and
-+ * faster to run.  Backslashed characters are exceptions, each becoming a
-+ * separate node; the code is simpler that way and it's not worth fixing.
-+ */
-+static char *
-+regatom(int *flagp)
-+{
-+	register char *ret;
-+	int flags;
-+
-+	*flagp = WORST;		/* Tentatively. */
-+
-+	switch (*regparse++) {
-+	case '^':
-+		ret = regnode(BOL);
-+		break;
-+	case '$':
-+		ret = regnode(EOL);
-+		break;
-+	case '.':
-+		ret = regnode(ANY);
-+		*flagp |= HASWIDTH|SIMPLE;
-+		break;
-+	case '[': {
-+			register int class;
-+			register int classend;
-+
-+			if (*regparse == '^') {	/* Complement of range. */
-+				ret = regnode(ANYBUT);
-+				regparse++;
-+			} else
-+				ret = regnode(ANYOF);
-+			if (*regparse == ']' || *regparse == '-')
-+				regc(*regparse++);
-+			while (*regparse != '\0' && *regparse != ']') {
-+				if (*regparse == '-') {
-+					regparse++;
-+					if (*regparse == ']' || *regparse == '\0')
-+						regc('-');
-+					else {
-+						class = UCHARAT(regparse-2)+1;
-+						classend = UCHARAT(regparse);
-+						if (class > classend+1)
-+							FAIL("invalid [] range");
-+						for (; class <= classend; class++)
-+							regc(class);
-+						regparse++;
-+					}
-+				} else
-+					regc(*regparse++);
-+			}
-+			regc('\0');
-+			if (*regparse != ']')
-+				FAIL("unmatched []");
-+			regparse++;
-+			*flagp |= HASWIDTH|SIMPLE;
-+		}
-+		break;
-+	case '(':
-+		ret = reg(1, &flags);
-+		if (ret == NULL)
-+			return(NULL);
-+		*flagp |= flags&(HASWIDTH|SPSTART);
-+		break;
-+	case '\0':
-+	case '|':
-+	case ')':
-+		FAIL("internal urp");	/* Supposed to be caught earlier. */
-+		break;
-+	case '?':
-+	case '+':
-+	case '*':
-+		FAIL("?+* follows nothing");
-+		break;
-+	case '\\':
-+		if (*regparse == '\0')
-+			FAIL("trailing \\");
-+		ret = regnode(EXACTLY);
-+		regc(*regparse++);
-+		regc('\0');
-+		*flagp |= HASWIDTH|SIMPLE;
-+		break;
-+	default: {
-+			register int len;
-+			register char ender;
-+
-+			regparse--;
-+			len = my_strcspn((const char *)regparse, (const char *)META);
-+			if (len <= 0)
-+				FAIL("internal disaster");
-+			ender = *(regparse+len);
-+			if (len > 1 && ISMULT(ender))
-+				len--;		/* Back off clear of ?+* operand. */
-+			*flagp |= HASWIDTH;
-+			if (len == 1)
-+				*flagp |= SIMPLE;
-+			ret = regnode(EXACTLY);
-+			while (len > 0) {
-+				regc(*regparse++);
-+				len--;
-+			}
-+			regc('\0');
-+		}
-+		break;
-+	}
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regnode - emit a node
-+ */
-+static char *			/* Location. */
-+regnode(char op)
-+{
-+	register char *ret;
-+	register char *ptr;
-+
-+	ret = regcode;
-+	if (ret == &regdummy) {
-+		regsize += 3;
-+		return(ret);
-+	}
-+
-+	ptr = ret;
-+	*ptr++ = op;
-+	*ptr++ = '\0';		/* Null "next" pointer. */
-+	*ptr++ = '\0';
-+	regcode = ptr;
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regc - emit (if appropriate) a byte of code
-+ */
-+static void
-+regc(char b)
-+{
-+	if (regcode != &regdummy)
-+		*regcode++ = b;
-+	else
-+		regsize++;
-+}
-+
-+/*
-+ - reginsert - insert an operator in front of already-emitted operand
-+ *
-+ * Means relocating the operand.
-+ */
-+static void
-+reginsert(char op, char* opnd)
-+{
-+	register char *src;
-+	register char *dst;
-+	register char *place;
-+
-+	if (regcode == &regdummy) {
-+		regsize += 3;
-+		return;
-+	}
-+
-+	src = regcode;
-+	regcode += 3;
-+	dst = regcode;
-+	while (src > opnd)
-+		*--dst = *--src;
-+
-+	place = opnd;		/* Op node, where operand used to be. */
-+	*place++ = op;
-+	*place++ = '\0';
-+	*place++ = '\0';
-+}
-+
-+/*
-+ - regtail - set the next-pointer at the end of a node chain
-+ */
-+static void
-+regtail(char *p, char *val)
-+{
-+	register char *scan;
-+	register char *temp;
-+	register int offset;
-+
-+	if (p == &regdummy)
-+		return;
-+
-+	/* Find last node. */
-+	scan = p;
-+	for (;;) {
-+		temp = regnext(scan);
-+		if (temp == NULL)
-+			break;
-+		scan = temp;
-+	}
-+
-+	if (OP(scan) == BACK)
-+		offset = scan - val;
-+	else
-+		offset = val - scan;
-+	*(scan+1) = (offset>>8)&0377;
-+	*(scan+2) = offset&0377;
-+}
-+
-+/*
-+ - regoptail - regtail on operand of first argument; nop if operandless
-+ */
-+static void
-+regoptail(char *p, char *val)
-+{
-+	/* "Operandless" and "op != BRANCH" are synonymous in practice. */
-+	if (p == NULL || p == &regdummy || OP(p) != BRANCH)
-+		return;
-+	regtail(OPERAND(p), val);
-+}
-+
-+/*
-+ * regexec and friends
-+ */
-+
-+/*
-+ * Global work variables for regexec().
-+ */
-+static char *reginput;		/* String-input pointer. */
-+static char *regbol;		/* Beginning of input, for ^ check. */
-+static char **regstartp;	/* Pointer to startp array. */
-+static char **regendp;		/* Ditto for endp. */
-+
-+/*
-+ * Forwards.
-+ */
-+STATIC int regtry(regexp *prog, char *string);
-+STATIC int regmatch(char *prog);
-+STATIC int regrepeat(char *p);
-+
-+#ifdef DEBUG
-+int regnarrate = 0;
-+void regdump();
-+STATIC char *regprop(char *op);
-+#endif
-+
-+/*
-+ - regexec - match a regexp against a string
-+ */
-+int
-+regexec(regexp *prog, char *string)
-+{
-+	register char *s;
-+
-+	/* Be paranoid... */
-+	if (prog == NULL || string == NULL) {
-+		printk("<3>Regexp: NULL parameter\n");
-+		return(0);
-+	}
-+
-+	/* Check validity of program. */
-+	if (UCHARAT(prog->program) != MAGIC) {
-+		printk("<3>Regexp: corrupted program\n");
-+		return(0);
-+	}
-+
-+	/* If there is a "must appear" string, look for it. */
-+	if (prog->regmust != NULL) {
-+		s = string;
-+		while ((s = strchr(s, prog->regmust[0])) != NULL) {
-+			if (strncmp(s, prog->regmust, prog->regmlen) == 0)
-+				break;	/* Found it. */
-+			s++;
-+		}
-+		if (s == NULL)	/* Not present. */
-+			return(0);
-+	}
-+
-+	/* Mark beginning of line for ^ . */
-+	regbol = string;
-+
-+	/* Simplest case:  anchored match need be tried only once. */
-+	if (prog->reganch)
-+		return(regtry(prog, string));
-+
-+	/* Messy cases:  unanchored match. */
-+	s = string;
-+	if (prog->regstart != '\0')
-+		/* We know what char it must start with. */
-+		while ((s = strchr(s, prog->regstart)) != NULL) {
-+			if (regtry(prog, s))
-+				return(1);
-+			s++;
-+		}
-+	else
-+		/* We don't -- general case. */
-+		do {
-+			if (regtry(prog, s))
-+				return(1);
-+		} while (*s++ != '\0');
-+
-+	/* Failure. */
-+	return(0);
-+}
-+
-+/*
-+ - regtry - try match at specific point
-+ */
-+static int			/* 0 failure, 1 success */
-+regtry(regexp *prog, char *string)
-+{
-+	register int i;
-+	register char **sp;
-+	register char **ep;
-+
-+	reginput = string;
-+	regstartp = prog->startp;
-+	regendp = prog->endp;
-+
-+	sp = prog->startp;
-+	ep = prog->endp;
-+	for (i = NSUBEXP; i > 0; i--) {
-+		*sp++ = NULL;
-+		*ep++ = NULL;
-+	}
-+	if (regmatch(prog->program + 1)) {
-+		prog->startp[0] = string;
-+		prog->endp[0] = reginput;
-+		return(1);
-+	} else
-+		return(0);
-+}
-+
-+/*
-+ - regmatch - main matching routine
-+ *
-+ * Conceptually the strategy is simple:  check to see whether the current
-+ * node matches, call self recursively to see whether the rest matches,
-+ * and then act accordingly.  In practice we make some effort to avoid
-+ * recursion, in particular by going through "ordinary" nodes (that don't
-+ * need to know whether the rest of the match failed) by a loop instead of
-+ * by recursion.
-+ */
-+static int			/* 0 failure, 1 success */
-+regmatch(char *prog)
-+{
-+	register char *scan = prog; /* Current node. */
-+	char *next;		    /* Next node. */
-+
-+#ifdef DEBUG
-+	if (scan != NULL && regnarrate)
-+		fprintf(stderr, "%s(\n", regprop(scan));
-+#endif
-+	while (scan != NULL) {
-+#ifdef DEBUG
-+		if (regnarrate)
-+			fprintf(stderr, "%s...\n", regprop(scan));
-+#endif
-+		next = regnext(scan);
-+
-+		switch (OP(scan)) {
-+		case BOL:
-+			if (reginput != regbol)
-+				return(0);
-+			break;
-+		case EOL:
-+			if (*reginput != '\0')
-+				return(0);
-+			break;
-+		case ANY:
-+			if (*reginput == '\0')
-+				return(0);
-+			reginput++;
-+			break;
-+		case EXACTLY: {
-+				register int len;
-+				register char *opnd;
-+
-+				opnd = OPERAND(scan);
-+				/* Inline the first character, for speed. */
-+				if (*opnd != *reginput)
-+					return(0);
-+				len = strlen(opnd);
-+				if (len > 1 && strncmp(opnd, reginput, len) != 0)
-+					return(0);
-+				reginput += len;
-+			}
-+			break;
-+		case ANYOF:
-+			if (*reginput == '\0' || strchr(OPERAND(scan), *reginput) == NULL)
-+				return(0);
-+			reginput++;
-+			break;
-+		case ANYBUT:
-+			if (*reginput == '\0' || strchr(OPERAND(scan), *reginput) != NULL)
-+				return(0);
-+			reginput++;
-+			break;
-+		case NOTHING:
-+		case BACK:
-+			break;
-+		case OPEN+1:
-+		case OPEN+2:
-+		case OPEN+3:
-+		case OPEN+4:
-+		case OPEN+5:
-+		case OPEN+6:
-+		case OPEN+7:
-+		case OPEN+8:
-+		case OPEN+9: {
-+				register int no;
-+				register char *save;
-+
-+				no = OP(scan) - OPEN;
-+				save = reginput;
-+
-+				if (regmatch(next)) {
-+					/*
-+					 * Don't set startp if some later
-+					 * invocation of the same parentheses
-+					 * already has.
-+					 */
-+					if (regstartp[no] == NULL)
-+						regstartp[no] = save;
-+					return(1);
-+				} else
-+					return(0);
-+			}
-+			break;
-+		case CLOSE+1:
-+		case CLOSE+2:
-+		case CLOSE+3:
-+		case CLOSE+4:
-+		case CLOSE+5:
-+		case CLOSE+6:
-+		case CLOSE+7:
-+		case CLOSE+8:
-+		case CLOSE+9:
-+			{
-+				register int no;
-+				register char *save;
-+
-+				no = OP(scan) - CLOSE;
-+				save = reginput;
-+
-+				if (regmatch(next)) {
-+					/*
-+					 * Don't set endp if some later
-+					 * invocation of the same parentheses
-+					 * already has.
-+					 */
-+					if (regendp[no] == NULL)
-+						regendp[no] = save;
-+					return(1);
-+				} else
-+					return(0);
-+			}
-+			break;
-+		case BRANCH: {
-+				register char *save;
-+
-+				if (OP(next) != BRANCH)		/* No choice. */
-+					next = OPERAND(scan);	/* Avoid recursion. */
-+				else {
-+					do {
-+						save = reginput;
-+						if (regmatch(OPERAND(scan)))
-+							return(1);
-+						reginput = save;
-+						scan = regnext(scan);
-+					} while (scan != NULL && OP(scan) == BRANCH);
-+					return(0);
-+					/* NOTREACHED */
-+				}
-+			}
-+			break;
-+		case STAR:
-+		case PLUS: {
-+				register char nextch;
-+				register int no;
-+				register char *save;
-+				register int min;
-+
-+				/*
-+				 * Lookahead to avoid useless match attempts
-+				 * when we know what character comes next.
-+				 */
-+				nextch = '\0';
-+				if (OP(next) == EXACTLY)
-+					nextch = *OPERAND(next);
-+				min = (OP(scan) == STAR) ? 0 : 1;
-+				save = reginput;
-+				no = regrepeat(OPERAND(scan));
-+				while (no >= min) {
-+					/* If it could work, try it. */
-+					if (nextch == '\0' || *reginput == nextch)
-+						if (regmatch(next))
-+							return(1);
-+					/* Couldn't or didn't -- back up. */
-+					no--;
-+					reginput = save + no;
-+				}
-+				return(0);
-+			}
-+			break;
-+		case END:
-+			return(1);	/* Success! */
-+			break;
-+		default:
-+			printk("<3>Regexp: memory corruption\n");
-+			return(0);
-+			break;
-+		}
-+
-+		scan = next;
-+	}
-+
-+	/*
-+	 * We get here only if there's trouble -- normally "case END" is
-+	 * the terminating point.
-+	 */
-+	printk("<3>Regexp: corrupted pointers\n");
-+	return(0);
-+}
-+
-+/*
-+ - regrepeat - repeatedly match something simple, report how many
-+ */
-+static int
-+regrepeat(char *p)
-+{
-+	register int count = 0;
-+	register char *scan;
-+	register char *opnd;
-+
-+	scan = reginput;
-+	opnd = OPERAND(p);
-+	switch (OP(p)) {
-+	case ANY:
-+		count = strlen(scan);
-+		scan += count;
-+		break;
-+	case EXACTLY:
-+		while (*opnd == *scan) {
-+			count++;
-+			scan++;
-+		}
-+		break;
-+	case ANYOF:
-+		while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
-+			count++;
-+			scan++;
-+		}
-+		break;
-+	case ANYBUT:
-+		while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
-+			count++;
-+			scan++;
-+		}
-+		break;
-+	default:		/* Oh dear.  Called inappropriately. */
-+		printk("<3>Regexp: internal foulup\n");
-+		count = 0;	/* Best compromise. */
-+		break;
-+	}
-+	reginput = scan;
-+
-+	return(count);
-+}
-+
-+/*
-+ - regnext - dig the "next" pointer out of a node
-+ */
-+static char* 
-+regnext(char *p)
-+{
-+	register int offset;
-+
-+	if (p == &regdummy)
-+		return(NULL);
-+
-+	offset = NEXT(p);
-+	if (offset == 0)
-+		return(NULL);
-+
-+	if (OP(p) == BACK)
-+		return(p-offset);
-+	else
-+		return(p+offset);
-+}
-+
-+#ifdef DEBUG
-+
-+STATIC char *regprop();
-+
-+/*
-+ - regdump - dump a regexp onto stdout in vaguely comprehensible form
-+ */
-+void
-+regdump(regexp *r)
-+{
-+	register char *s;
-+	register char op = EXACTLY;	/* Arbitrary non-END op. */
-+	register char *next;
-+	/* extern char *strchr(); */
-+
-+
-+	s = r->program + 1;
-+	while (op != END) {	/* While that wasn't END last time... */
-+		op = OP(s);
-+		printf("%2d%s", s-r->program, regprop(s));	/* Where, what. */
-+		next = regnext(s);
-+		if (next == NULL)		/* Next ptr. */
-+			printf("(0)");
-+		else 
-+			printf("(%d)", (s-r->program)+(next-s));
-+		s += 3;
-+		if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
-+			/* Literal string, where present. */
-+			while (*s != '\0') {
-+				putchar(*s);
-+				s++;
-+			}
-+			s++;
-+		}
-+		putchar('\n');
-+	}
-+
-+	/* Header fields of interest. */
-+	if (r->regstart != '\0')
-+		printf("start `%c' ", r->regstart);
-+	if (r->reganch)
-+		printf("anchored ");
-+	if (r->regmust != NULL)
-+		printf("must have \"%s\"", r->regmust);
-+	printf("\n");
-+}
-+
-+/*
-+ - regprop - printable representation of opcode
-+ */
-+static char *
-+regprop(char *op)
-+{
-+#define BUFLEN 50
-+	register char *p;
-+	static char buf[BUFLEN];
-+
-+	strcpy(buf, ":");
-+
-+	switch (OP(op)) {
-+	case BOL:
-+		p = "BOL";
-+		break;
-+	case EOL:
-+		p = "EOL";
-+		break;
-+	case ANY:
-+		p = "ANY";
-+		break;
-+	case ANYOF:
-+		p = "ANYOF";
-+		break;
-+	case ANYBUT:
-+		p = "ANYBUT";
-+		break;
-+	case BRANCH:
-+		p = "BRANCH";
-+		break;
-+	case EXACTLY:
-+		p = "EXACTLY";
-+		break;
-+	case NOTHING:
-+		p = "NOTHING";
-+		break;
-+	case BACK:
-+		p = "BACK";
-+		break;
-+	case END:
-+		p = "END";
-+		break;
-+	case OPEN+1:
-+	case OPEN+2:
-+	case OPEN+3:
-+	case OPEN+4:
-+	case OPEN+5:
-+	case OPEN+6:
-+	case OPEN+7:
-+	case OPEN+8:
-+	case OPEN+9:
-+		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
-+		p = NULL;
-+		break;
-+	case CLOSE+1:
-+	case CLOSE+2:
-+	case CLOSE+3:
-+	case CLOSE+4:
-+	case CLOSE+5:
-+	case CLOSE+6:
-+	case CLOSE+7:
-+	case CLOSE+8:
-+	case CLOSE+9:
-+		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
-+		p = NULL;
-+		break;
-+	case STAR:
-+		p = "STAR";
-+		break;
-+	case PLUS:
-+		p = "PLUS";
-+		break;
-+	default:
-+		printk("<3>Regexp: corrupted opcode\n");
-+		break;
-+	}
-+	if (p != NULL)
-+		strncat(buf, p, BUFLEN-strlen(buf));
-+	return(buf);
-+}
-+#endif
-+
-+
-diff -urN linux.old/net/ipv4/netfilter/regexp/regexp.h linux.dev/net/ipv4/netfilter/regexp/regexp.h
---- linux.old/net/ipv4/netfilter/regexp/regexp.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/regexp/regexp.h	2006-01-31 16:58:24.819335750 +0100
-@@ -0,0 +1,40 @@
-+/*
-+ * Definitions etc. for regexp(3) routines.
-+ *
-+ * Caveat:  this is V8 regexp(3) [actually, a reimplementation thereof],
-+ * not the System V one.
-+ */
-+
-+#ifndef REGEXP_H
-+#define REGEXP_H
-+
-+/* 
-+http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h , 
-+which contains a version of this library, says:
-+
-+ *
-+ * NSUBEXP must be at least 10, and no greater than 117 or the parser
-+ * will not work properly.
-+ *
-+
-+However, it looks rather like this library is limited to 10.  If you think
-+otherwise, let us know.
-+*/
-+
-+#define NSUBEXP  10
-+typedef struct regexp {
-+	char *startp[NSUBEXP];
-+	char *endp[NSUBEXP];
-+	char regstart;		/* Internal use only. */
-+	char reganch;		/* Internal use only. */
-+	char *regmust;		/* Internal use only. */
-+	int regmlen;		/* Internal use only. */
-+	char program[1];	/* Unwarranted chumminess with compiler. */
-+} regexp;
-+
-+regexp * regcomp(char *exp, int *patternsize);
-+int regexec(regexp *prog, char *string);
-+void regsub(regexp *prog, char *source, char *dest);
-+void regerror(char *s);
-+
-+#endif
-diff -urN linux.old/net/ipv4/netfilter/regexp/regmagic.h linux.dev/net/ipv4/netfilter/regexp/regmagic.h
---- linux.old/net/ipv4/netfilter/regexp/regmagic.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/regexp/regmagic.h	2006-01-31 16:58:24.823336000 +0100
-@@ -0,0 +1,5 @@
-+/*
-+ * The first byte of the regexp internal "program" is actually this magic
-+ * number; the start node begins in the second byte.
-+ */
-+#define	MAGIC	0234
-diff -urN linux.old/net/ipv4/netfilter/regexp/regsub.c linux.dev/net/ipv4/netfilter/regexp/regsub.c
---- linux.old/net/ipv4/netfilter/regexp/regsub.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/regexp/regsub.c	2006-01-31 16:58:24.823336000 +0100
-@@ -0,0 +1,95 @@
-+/*
-+ * regsub
-+ * @(#)regsub.c	1.3 of 2 April 86
-+ *
-+ *	Copyright (c) 1986 by University of Toronto.
-+ *	Written by Henry Spencer.  Not derived from licensed software.
-+ *
-+ *	Permission is granted to anyone to use this software for any
-+ *	purpose on any computer system, and to redistribute it freely,
-+ *	subject to the following restrictions:
-+ *
-+ *	1. The author is not responsible for the consequences of use of
-+ *		this software, no matter how awful, even if they arise
-+ *		from defects in it.
-+ *
-+ *	2. The origin of this software must not be misrepresented, either
-+ *		by explicit claim or by omission.
-+ *
-+ *	3. Altered versions must be plainly marked as such, and must not
-+ *		be misrepresented as being the original software.
-+ *
-+ *
-+ * This code was modified by Ethan Sommer to work within the kernel
-+ * (it now uses kmalloc etc..)
-+ *
-+ */
-+#include "regexp.h"
-+#include "regmagic.h"
-+#include <linux/string.h>
-+
-+
-+#ifndef CHARBITS
-+#define	UCHARAT(p)	((int)*(unsigned char *)(p))
-+#else
-+#define	UCHARAT(p)	((int)*(p)&CHARBITS)
-+#endif
-+
-+#if 0
-+//void regerror(char * s)
-+//{
-+//        printk("regexp(3): %s", s);
-+//        /* NOTREACHED */
-+//}
-+#endif
-+
-+/*
-+ - regsub - perform substitutions after a regexp match
-+ */
-+void
-+regsub(regexp * prog, char * source, char * dest)
-+{
-+	register char *src;
-+	register char *dst;
-+	register char c;
-+	register int no;
-+	register int len;
-+	
-+	/* Not necessary and gcc doesn't like it -MLS */
-+	/*extern char *strncpy();*/
-+
-+	if (prog == NULL || source == NULL || dest == NULL) {
-+		regerror("NULL parm to regsub");
-+		return;
-+	}
-+	if (UCHARAT(prog->program) != MAGIC) {
-+		regerror("damaged regexp fed to regsub");
-+		return;
-+	}
-+
-+	src = source;
-+	dst = dest;
-+	while ((c = *src++) != '\0') {
-+		if (c == '&')
-+			no = 0;
-+		else if (c == '\\' && '0' <= *src && *src <= '9')
-+			no = *src++ - '0';
-+		else
-+			no = -1;
-+
-+		if (no < 0) {	/* Ordinary character. */
-+			if (c == '\\' && (*src == '\\' || *src == '&'))
-+				c = *src++;
-+			*dst++ = c;
-+		} else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
-+			len = prog->endp[no] - prog->startp[no];
-+			(void) strncpy(dst, prog->startp[no], len);
-+			dst += len;
-+			if (len != 0 && *(dst-1) == '\0') {	/* strncpy hit NUL. */
-+				regerror("damaged match string");
-+				return;
-+			}
-+		}
-+	}
-+	*dst++ = '\0';
-+}
diff --git a/openwrt/target/linux/generic-2.4/patches/603-netfilter_nat_pptp.patch b/openwrt/target/linux/generic-2.4/patches/603-netfilter_nat_pptp.patch
deleted file mode 100644
index 6a7a16fb9a..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/603-netfilter_nat_pptp.patch
+++ /dev/null
@@ -1,2412 +0,0 @@
-diff -urN linux-2.4.29-old/include/linux/netfilter_ipv4/ip_conntrack.h linux-2.4.29-dev/include/linux/netfilter_ipv4/ip_conntrack.h
---- linux-2.4.29-old/include/linux/netfilter_ipv4/ip_conntrack.h	2005-04-02 19:04:11.000000000 +0200
-+++ linux-2.4.29-dev/include/linux/netfilter_ipv4/ip_conntrack.h	2005-04-02 19:41:05.000000000 +0200
-@@ -50,16 +50,19 @@
- 
- #include <linux/netfilter_ipv4/ip_conntrack_tcp.h>
- #include <linux/netfilter_ipv4/ip_conntrack_icmp.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_proto_gre.h>
- 
- /* per conntrack: protocol private data */
- union ip_conntrack_proto {
- 	/* insert conntrack proto private data here */
- 	struct ip_ct_tcp tcp;
- 	struct ip_ct_icmp icmp;
-+	struct ip_ct_gre gre;
- };
- 
- union ip_conntrack_expect_proto {
- 	/* insert expect proto private data here */
-+	struct ip_ct_gre_expect gre;
- };
- 
- /* Add protocol helper include file here */
-@@ -67,6 +70,7 @@
- 
- #include <linux/netfilter_ipv4/ip_conntrack_ftp.h>
- #include <linux/netfilter_ipv4/ip_conntrack_irc.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_pptp.h>
- 
- /* per expectation: application helper private data */
- union ip_conntrack_expect_help {
-@@ -74,6 +78,7 @@
- 	struct ip_ct_amanda_expect exp_amanda_info;
- 	struct ip_ct_ftp_expect exp_ftp_info;
- 	struct ip_ct_irc_expect exp_irc_info;
-+	struct ip_ct_pptp_expect exp_pptp_info;
- 
- #ifdef CONFIG_IP_NF_NAT_NEEDED
- 	union {
-@@ -87,14 +92,17 @@
- 	/* insert conntrack helper private data (master) here */
- 	struct ip_ct_ftp_master ct_ftp_info;
- 	struct ip_ct_irc_master ct_irc_info;
-+	struct ip_ct_pptp_master ct_pptp_info;
- };
- 
- #ifdef CONFIG_IP_NF_NAT_NEEDED
- #include <linux/netfilter_ipv4/ip_nat.h>
-+#include <linux/netfilter_ipv4/ip_nat_pptp.h>
- 
- /* per conntrack: nat application helper private data */
- union ip_conntrack_nat_help {
- 	/* insert nat helper private data here */
-+	struct ip_nat_pptp nat_pptp_info;
- };
- #endif
- 
-diff -urN linux-2.4.29-old/include/linux/netfilter_ipv4/ip_conntrack_pptp.h linux-2.4.29-dev/include/linux/netfilter_ipv4/ip_conntrack_pptp.h
---- linux-2.4.29-old/include/linux/netfilter_ipv4/ip_conntrack_pptp.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29-dev/include/linux/netfilter_ipv4/ip_conntrack_pptp.h	2005-04-02 19:09:07.000000000 +0200
-@@ -0,0 +1,313 @@
-+/* PPTP constants and structs */
-+#ifndef _CONNTRACK_PPTP_H
-+#define _CONNTRACK_PPTP_H
-+
-+/* state of the control session */
-+enum pptp_ctrlsess_state {
-+	PPTP_SESSION_NONE,			/* no session present */
-+	PPTP_SESSION_ERROR,			/* some session error */
-+	PPTP_SESSION_STOPREQ,			/* stop_sess request seen */
-+	PPTP_SESSION_REQUESTED,			/* start_sess request seen */
-+	PPTP_SESSION_CONFIRMED,			/* session established */
-+};
-+
-+/* state of the call inside the control session */
-+enum pptp_ctrlcall_state {
-+	PPTP_CALL_NONE,
-+	PPTP_CALL_ERROR,
-+	PPTP_CALL_OUT_REQ,
-+	PPTP_CALL_OUT_CONF,
-+	PPTP_CALL_IN_REQ,
-+	PPTP_CALL_IN_REP,
-+	PPTP_CALL_IN_CONF,
-+	PPTP_CALL_CLEAR_REQ,
-+};
-+
-+
-+/* conntrack private data */
-+struct ip_ct_pptp_master {
-+	enum pptp_ctrlsess_state sstate;	/* session state */
-+
-+	/* everything below is going to be per-expectation in newnat,
-+	 * since there could be more than one call within one session */
-+	enum pptp_ctrlcall_state cstate;	/* call state */
-+	u_int16_t pac_call_id;			/* call id of PAC, host byte order */
-+	u_int16_t pns_call_id;			/* call id of PNS, host byte order */
-+};
-+
-+/* conntrack_expect private member */
-+struct ip_ct_pptp_expect {
-+	enum pptp_ctrlcall_state cstate; 	/* call state */
-+	u_int16_t pac_call_id;			/* call id of PAC */
-+	u_int16_t pns_call_id;			/* call id of PNS */
-+};
-+
-+
-+#ifdef __KERNEL__
-+
-+#include <linux/netfilter_ipv4/lockhelp.h>
-+DECLARE_LOCK_EXTERN(ip_pptp_lock);
-+
-+#define IP_CONNTR_PPTP		PPTP_CONTROL_PORT
-+
-+union pptp_ctrl_union {
-+                void				*rawreq;
-+		struct PptpStartSessionRequest	*sreq;
-+		struct PptpStartSessionReply	*srep;
-+		struct PptpStopSessionRequest	*streq;
-+		struct PptpStopSessionReply	*strep;
-+                struct PptpOutCallRequest       *ocreq;
-+                struct PptpOutCallReply         *ocack;
-+                struct PptpInCallRequest        *icreq;
-+                struct PptpInCallReply          *icack;
-+                struct PptpInCallConnected      *iccon;
-+		struct PptpClearCallRequest	*clrreq;
-+                struct PptpCallDisconnectNotify *disc;
-+                struct PptpWanErrorNotify       *wanerr;
-+                struct PptpSetLinkInfo          *setlink;
-+};
-+
-+
-+
-+#define PPTP_CONTROL_PORT	1723
-+
-+#define PPTP_PACKET_CONTROL	1
-+#define PPTP_PACKET_MGMT	2
-+
-+#define PPTP_MAGIC_COOKIE	0x1a2b3c4d
-+
-+struct pptp_pkt_hdr {
-+	__u16	packetLength;
-+	__u16	packetType;
-+	__u32	magicCookie;
-+};
-+
-+/* PptpControlMessageType values */
-+#define PPTP_START_SESSION_REQUEST	1
-+#define PPTP_START_SESSION_REPLY	2
-+#define PPTP_STOP_SESSION_REQUEST	3
-+#define PPTP_STOP_SESSION_REPLY		4
-+#define PPTP_ECHO_REQUEST		5
-+#define PPTP_ECHO_REPLY			6
-+#define PPTP_OUT_CALL_REQUEST		7
-+#define PPTP_OUT_CALL_REPLY		8
-+#define PPTP_IN_CALL_REQUEST		9
-+#define PPTP_IN_CALL_REPLY		10
-+#define PPTP_IN_CALL_CONNECT		11
-+#define PPTP_CALL_CLEAR_REQUEST		12
-+#define PPTP_CALL_DISCONNECT_NOTIFY	13
-+#define PPTP_WAN_ERROR_NOTIFY		14
-+#define PPTP_SET_LINK_INFO		15
-+
-+#define PPTP_MSG_MAX			15
-+
-+/* PptpGeneralError values */
-+#define PPTP_ERROR_CODE_NONE		0
-+#define PPTP_NOT_CONNECTED		1
-+#define PPTP_BAD_FORMAT			2
-+#define PPTP_BAD_VALUE			3
-+#define PPTP_NO_RESOURCE		4
-+#define PPTP_BAD_CALLID			5
-+#define PPTP_REMOVE_DEVICE_ERROR	6
-+
-+struct PptpControlHeader {
-+	__u16	messageType;
-+	__u16	reserved;
-+};
-+
-+/* FramingCapability Bitmap Values */
-+#define PPTP_FRAME_CAP_ASYNC		0x1
-+#define PPTP_FRAME_CAP_SYNC		0x2
-+
-+/* BearerCapability Bitmap Values */
-+#define PPTP_BEARER_CAP_ANALOG		0x1
-+#define PPTP_BEARER_CAP_DIGITAL		0x2
-+
-+struct PptpStartSessionRequest {
-+	__u16	protocolVersion;
-+	__u8	reserved1;
-+	__u8	reserved2;
-+	__u32	framingCapability;
-+	__u32	bearerCapability;
-+	__u16	maxChannels;
-+	__u16	firmwareRevision;
-+	__u8	hostName[64];
-+	__u8	vendorString[64];
-+};
-+
-+/* PptpStartSessionResultCode Values */
-+#define PPTP_START_OK			1
-+#define PPTP_START_GENERAL_ERROR	2
-+#define PPTP_START_ALREADY_CONNECTED	3
-+#define PPTP_START_NOT_AUTHORIZED	4
-+#define PPTP_START_UNKNOWN_PROTOCOL	5
-+
-+struct PptpStartSessionReply {
-+	__u16	protocolVersion;
-+	__u8	resultCode;
-+	__u8	generalErrorCode;
-+	__u32	framingCapability;
-+	__u32	bearerCapability;
-+	__u16	maxChannels;
-+	__u16	firmwareRevision;
-+	__u8	hostName[64];
-+	__u8	vendorString[64];
-+};
-+
-+/* PptpStopReasons */
-+#define PPTP_STOP_NONE			1
-+#define PPTP_STOP_PROTOCOL		2
-+#define PPTP_STOP_LOCAL_SHUTDOWN	3
-+
-+struct PptpStopSessionRequest {
-+	__u8	reason;
-+};
-+
-+/* PptpStopSessionResultCode */
-+#define PPTP_STOP_OK			1
-+#define PPTP_STOP_GENERAL_ERROR		2
-+
-+struct PptpStopSessionReply {
-+	__u8	resultCode;
-+	__u8	generalErrorCode;
-+};
-+
-+struct PptpEchoRequest {
-+	__u32 identNumber;
-+};
-+
-+/* PptpEchoReplyResultCode */
-+#define PPTP_ECHO_OK			1
-+#define PPTP_ECHO_GENERAL_ERROR		2
-+
-+struct PptpEchoReply {
-+	__u32	identNumber;
-+	__u8	resultCode;
-+	__u8	generalErrorCode;
-+	__u16	reserved;
-+};
-+
-+/* PptpFramingType */
-+#define PPTP_ASYNC_FRAMING		1
-+#define PPTP_SYNC_FRAMING		2
-+#define PPTP_DONT_CARE_FRAMING		3
-+
-+/* PptpCallBearerType */
-+#define PPTP_ANALOG_TYPE		1
-+#define PPTP_DIGITAL_TYPE		2
-+#define PPTP_DONT_CARE_BEARER_TYPE	3
-+
-+struct PptpOutCallRequest {
-+	__u16	callID;
-+	__u16	callSerialNumber;
-+	__u32	minBPS;
-+	__u32	maxBPS;
-+	__u32	bearerType;
-+	__u32	framingType;
-+	__u16	packetWindow;
-+	__u16	packetProcDelay;
-+	__u16	reserved1;
-+	__u16	phoneNumberLength;
-+	__u16	reserved2;
-+	__u8	phoneNumber[64];
-+	__u8	subAddress[64];
-+};
-+
-+/* PptpCallResultCode */
-+#define PPTP_OUTCALL_CONNECT		1
-+#define PPTP_OUTCALL_GENERAL_ERROR	2
-+#define PPTP_OUTCALL_NO_CARRIER		3
-+#define PPTP_OUTCALL_BUSY		4
-+#define PPTP_OUTCALL_NO_DIAL_TONE	5
-+#define PPTP_OUTCALL_TIMEOUT		6
-+#define PPTP_OUTCALL_DONT_ACCEPT	7
-+
-+struct PptpOutCallReply {
-+	__u16	callID;
-+	__u16	peersCallID;
-+	__u8	resultCode;
-+	__u8	generalErrorCode;
-+	__u16	causeCode;
-+	__u32	connectSpeed;
-+	__u16	packetWindow;
-+	__u16	packetProcDelay;
-+	__u32	physChannelID;
-+};
-+
-+struct PptpInCallRequest {
-+	__u16	callID;
-+	__u16	callSerialNumber;
-+	__u32	callBearerType;
-+	__u32	physChannelID;
-+	__u16	dialedNumberLength;
-+	__u16	dialingNumberLength;
-+	__u8	dialedNumber[64];
-+	__u8	dialingNumber[64];
-+	__u8	subAddress[64];
-+};
-+
-+/* PptpInCallResultCode */
-+#define PPTP_INCALL_ACCEPT		1
-+#define PPTP_INCALL_GENERAL_ERROR	2
-+#define PPTP_INCALL_DONT_ACCEPT		3
-+
-+struct PptpInCallReply {
-+	__u16	callID;
-+	__u16	peersCallID;
-+	__u8	resultCode;
-+	__u8	generalErrorCode;
-+	__u16	packetWindow;
-+	__u16	packetProcDelay;
-+	__u16	reserved;
-+};
-+
-+struct PptpInCallConnected {
-+	__u16	peersCallID;
-+	__u16	reserved;
-+	__u32	connectSpeed;
-+	__u16	packetWindow;
-+	__u16	packetProcDelay;
-+	__u32	callFramingType;
-+};
-+
-+struct PptpClearCallRequest {
-+	__u16	callID;
-+	__u16	reserved;
-+};
-+
-+struct PptpCallDisconnectNotify {
-+	__u16	callID;
-+	__u8	resultCode;
-+	__u8	generalErrorCode;
-+	__u16	causeCode;
-+	__u16	reserved;
-+	__u8	callStatistics[128];
-+};
-+
-+struct PptpWanErrorNotify {
-+	__u16	peersCallID;
-+	__u16	reserved;
-+	__u32	crcErrors;
-+	__u32	framingErrors;
-+	__u32	hardwareOverRuns;
-+	__u32	bufferOverRuns;
-+	__u32	timeoutErrors;
-+	__u32	alignmentErrors;
-+};
-+
-+struct PptpSetLinkInfo {
-+	__u16	peersCallID;
-+	__u16	reserved;
-+	__u32	sendAccm;
-+	__u32	recvAccm;
-+};
-+
-+
-+struct pptp_priv_data {
-+	__u16	call_id;
-+	__u16	mcall_id;
-+	__u16	pcall_id;
-+};
-+
-+#endif /* __KERNEL__ */
-+#endif /* _CONNTRACK_PPTP_H */
-diff -urN linux-2.4.29-old/include/linux/netfilter_ipv4/ip_conntrack_proto_gre.h linux-2.4.29-dev/include/linux/netfilter_ipv4/ip_conntrack_proto_gre.h
---- linux-2.4.29-old/include/linux/netfilter_ipv4/ip_conntrack_proto_gre.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29-dev/include/linux/netfilter_ipv4/ip_conntrack_proto_gre.h	2005-04-02 19:10:45.000000000 +0200
-@@ -0,0 +1,123 @@
-+#ifndef _CONNTRACK_PROTO_GRE_H
-+#define _CONNTRACK_PROTO_GRE_H
-+#include <asm/byteorder.h>
-+
-+/* GRE PROTOCOL HEADER */
-+
-+/* GRE Version field */
-+#define GRE_VERSION_1701	0x0
-+#define GRE_VERSION_PPTP	0x1
-+
-+/* GRE Protocol field */
-+#define GRE_PROTOCOL_PPTP	0x880B
-+
-+/* GRE Flags */
-+#define GRE_FLAG_C		0x80
-+#define GRE_FLAG_R		0x40
-+#define GRE_FLAG_K		0x20
-+#define GRE_FLAG_S		0x10
-+#define GRE_FLAG_A		0x80
-+
-+#define GRE_IS_C(f)	((f)&GRE_FLAG_C)
-+#define GRE_IS_R(f)	((f)&GRE_FLAG_R)
-+#define GRE_IS_K(f)	((f)&GRE_FLAG_K)
-+#define GRE_IS_S(f)	((f)&GRE_FLAG_S)
-+#define GRE_IS_A(f)	((f)&GRE_FLAG_A)
-+
-+/* GRE is a mess: Four different standards */
-+struct gre_hdr {
-+#if defined(__LITTLE_ENDIAN_BITFIELD)
-+	__u16	rec:3,
-+		srr:1,
-+		seq:1,
-+		key:1,
-+		routing:1,
-+		csum:1,
-+		version:3,
-+		reserved:4,
-+		ack:1;
-+#elif defined(__BIG_ENDIAN_BITFIELD)
-+	__u16	csum:1,
-+		routing:1,
-+		key:1,
-+		seq:1,
-+		srr:1,
-+		rec:3,
-+		ack:1,
-+		reserved:4,
-+		version:3;
-+#else
-+#error "Adjust your <asm/byteorder.h> defines"
-+#endif
-+	__u16	protocol;
-+};
-+
-+/* modified GRE header for PPTP */
-+struct gre_hdr_pptp {
-+	__u8  flags;		/* bitfield */
-+	__u8  version;		/* should be GRE_VERSION_PPTP */
-+	__u16 protocol;		/* should be GRE_PROTOCOL_PPTP */
-+	__u16 payload_len;	/* size of ppp payload, not inc. gre header */
-+	__u16 call_id;		/* peer's call_id for this session */
-+	__u32 seq;		/* sequence number.  Present if S==1 */
-+	__u32 ack;		/* seq number of highest packet recieved by */
-+				/*  sender in this session */
-+};
-+
-+
-+/* this is part of ip_conntrack */
-+struct ip_ct_gre {
-+	unsigned int stream_timeout;
-+	unsigned int timeout;
-+};
-+
-+/* this is part of ip_conntrack_expect */
-+struct ip_ct_gre_expect {
-+	struct ip_ct_gre_keymap *keymap_orig, *keymap_reply;
-+};
-+
-+#ifdef __KERNEL__
-+struct ip_conntrack_expect;
-+
-+/* structure for original <-> reply keymap */
-+struct ip_ct_gre_keymap {
-+	struct list_head list;
-+
-+	struct ip_conntrack_tuple tuple;
-+};
-+
-+
-+/* add new tuple->key_reply pair to keymap */
-+int ip_ct_gre_keymap_add(struct ip_conntrack_expect *exp,
-+			 struct ip_conntrack_tuple *t,
-+			 int reply);
-+
-+/* change an existing keymap entry */
-+void ip_ct_gre_keymap_change(struct ip_ct_gre_keymap *km,
-+			     struct ip_conntrack_tuple *t);
-+
-+/* delete keymap entries */
-+void ip_ct_gre_keymap_destroy(struct ip_conntrack_expect *exp);
-+
-+
-+/* get pointer to gre key, if present */
-+static inline u_int32_t *gre_key(struct gre_hdr *greh)
-+{
-+	if (!greh->key)
-+		return NULL;
-+	if (greh->csum || greh->routing)
-+		return (u_int32_t *) (greh+sizeof(*greh)+4);
-+	return (u_int32_t *) (greh+sizeof(*greh));
-+}
-+
-+/* get pointer ot gre csum, if present */
-+static inline u_int16_t *gre_csum(struct gre_hdr *greh)
-+{
-+	if (!greh->csum)
-+		return NULL;
-+	return (u_int16_t *) (greh+sizeof(*greh));
-+}
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _CONNTRACK_PROTO_GRE_H */
-diff -urN linux-2.4.29-old/include/linux/netfilter_ipv4/ip_conntrack_tuple.h linux-2.4.29-dev/include/linux/netfilter_ipv4/ip_conntrack_tuple.h
---- linux-2.4.29-old/include/linux/netfilter_ipv4/ip_conntrack_tuple.h	2003-11-28 19:26:21.000000000 +0100
-+++ linux-2.4.29-dev/include/linux/netfilter_ipv4/ip_conntrack_tuple.h	2005-04-02 19:07:18.000000000 +0200
-@@ -14,7 +14,7 @@
- union ip_conntrack_manip_proto
- {
- 	/* Add other protocols here. */
--	u_int16_t all;
-+	u_int32_t all;
- 
- 	struct {
- 		u_int16_t port;
-@@ -25,6 +25,9 @@
- 	struct {
- 		u_int16_t id;
- 	} icmp;
-+	struct {
-+		u_int32_t key;
-+	} gre;
- };
- 
- /* The manipulable part of the tuple. */
-@@ -44,7 +47,7 @@
- 		u_int32_t ip;
- 		union {
- 			/* Add other protocols here. */
--			u_int16_t all;
-+			u_int32_t all;
- 
- 			struct {
- 				u_int16_t port;
-@@ -55,6 +58,9 @@
- 			struct {
- 				u_int8_t type, code;
- 			} icmp;
-+			struct {
-+				u_int32_t key;
-+			} gre;
- 		} u;
- 
- 		/* The protocol. */
-@@ -80,10 +86,16 @@
- #ifdef __KERNEL__
- 
- #define DUMP_TUPLE(tp)						\
--DEBUGP("tuple %p: %u %u.%u.%u.%u:%hu -> %u.%u.%u.%u:%hu\n",	\
-+DEBUGP("tuple %p: %u %u.%u.%u.%u:%u -> %u.%u.%u.%u:%u\n",	\
-        (tp), (tp)->dst.protonum,				\
--       NIPQUAD((tp)->src.ip), ntohs((tp)->src.u.all),		\
--       NIPQUAD((tp)->dst.ip), ntohs((tp)->dst.u.all))
-+       NIPQUAD((tp)->src.ip), ntohl((tp)->src.u.all),		\
-+       NIPQUAD((tp)->dst.ip), ntohl((tp)->dst.u.all))
-+
-+#define DUMP_TUPLE_RAW(x) 						\
-+	DEBUGP("tuple %p: %u %u.%u.%u.%u:0x%08x -> %u.%u.%u.%u:0x%08x\n",\
-+	(x), (x)->dst.protonum,						\
-+	NIPQUAD((x)->src.ip), ntohl((x)->src.u.all), 			\
-+	NIPQUAD((x)->dst.ip), ntohl((x)->dst.u.all))
- 
- #define CTINFO2DIR(ctinfo) ((ctinfo) >= IP_CT_IS_REPLY ? IP_CT_DIR_REPLY : IP_CT_DIR_ORIGINAL)
- 
-diff -urN linux-2.4.29-old/include/linux/netfilter_ipv4/ip_nat_pptp.h linux-2.4.29-dev/include/linux/netfilter_ipv4/ip_nat_pptp.h
---- linux-2.4.29-old/include/linux/netfilter_ipv4/ip_nat_pptp.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29-dev/include/linux/netfilter_ipv4/ip_nat_pptp.h	2005-04-02 19:07:18.000000000 +0200
-@@ -0,0 +1,11 @@
-+/* PPTP constants and structs */
-+#ifndef _NAT_PPTP_H
-+#define _NAT_PPTP_H
-+
-+/* conntrack private data */
-+struct ip_nat_pptp {
-+	u_int16_t pns_call_id;		/* NAT'ed PNS call id */
-+	u_int16_t pac_call_id;		/* NAT'ed PAC call id */
-+};
-+
-+#endif /* _NAT_PPTP_H */
-diff -urN linux-2.4.29-old/net/ipv4/netfilter/Config.in linux-2.4.29-dev/net/ipv4/netfilter/Config.in
---- linux-2.4.29-old/net/ipv4/netfilter/Config.in	2005-04-02 19:04:11.000000000 +0200
-+++ linux-2.4.29-dev/net/ipv4/netfilter/Config.in	2005-04-02 19:07:18.000000000 +0200
-@@ -10,6 +10,8 @@
-   dep_tristate '  Amanda protocol support' CONFIG_IP_NF_AMANDA $CONFIG_IP_NF_CONNTRACK
-   dep_tristate '  TFTP protocol support' CONFIG_IP_NF_TFTP $CONFIG_IP_NF_CONNTRACK
-   dep_tristate '  IRC protocol support' CONFIG_IP_NF_IRC $CONFIG_IP_NF_CONNTRACK
-+  dep_tristate '  GRE protocol support' CONFIG_IP_NF_CT_PROTO_GRE $CONFIG_IP_NF_CONNTRACK
-+  dep_tristate '   PPTP protocol support' CONFIG_IP_NF_PPTP $CONFIG_IP_NF_CT_PROTO_GRE
- fi
- 
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-@@ -67,6 +69,20 @@
-       define_bool CONFIG_IP_NF_NAT_NEEDED y
-       dep_tristate '    MASQUERADE target support' CONFIG_IP_NF_TARGET_MASQUERADE $CONFIG_IP_NF_NAT
-       dep_tristate '    REDIRECT target support' CONFIG_IP_NF_TARGET_REDIRECT $CONFIG_IP_NF_NAT
-+      if [ "$CONFIG_IP_NF_PPTP" = "m" ]; then
-+        define_tristate CONFIG_IP_NF_NAT_PPTP m
-+      else
-+        if [ "$CONFIG_IP_NF_PPTP" = "y" ]; then
-+          define_tristate CONFIG_IP_NF_NAT_PPTP $CONFIG_IP_NF_NAT
-+        fi
-+      fi
-+      if [ "$CONFIG_IP_NF_CT_PROTO_GRE" = "m" ]; then
-+        define_tristate CONFIG_IP_NF_NAT_PROTO_GRE m
-+      else
-+        if [ "$CONFIG_IP_NF_CT_PROTO_GRE" = "y" ]; then
-+          define_tristate CONFIG_IP_NF_NAT_PROTO_GRE $CONFIG_IP_NF_NAT
-+        fi
-+      fi
-       if [ "$CONFIG_IP_NF_AMANDA" = "m" ]; then
-         define_tristate CONFIG_IP_NF_NAT_AMANDA m
-       else
-diff -urN linux-2.4.29-old/net/ipv4/netfilter/ip_conntrack_core.c linux-2.4.29-dev/net/ipv4/netfilter/ip_conntrack_core.c
---- linux-2.4.29-old/net/ipv4/netfilter/ip_conntrack_core.c	2005-04-02 19:04:11.000000000 +0200
-+++ linux-2.4.29-dev/net/ipv4/netfilter/ip_conntrack_core.c	2005-04-02 19:07:18.000000000 +0200
-@@ -142,6 +142,8 @@
- 	tuple->dst.ip = iph->daddr;
- 	tuple->dst.protonum = iph->protocol;
- 
-+	tuple->src.u.all = tuple->dst.u.all = 0;
-+
- 	ret = protocol->pkt_to_tuple((u_int32_t *)iph + iph->ihl,
- 				     len - 4*iph->ihl,
- 				     tuple);
-@@ -157,6 +159,8 @@
- 	inverse->dst.ip = orig->src.ip;
- 	inverse->dst.protonum = orig->dst.protonum;
- 
-+	inverse->src.u.all = inverse->dst.u.all = 0;
-+
- 	return protocol->invert_tuple(inverse, orig);
- }
- 
-@@ -954,8 +958,8 @@
- 	 * so there is no need to use the tuple lock too */
- 
- 	DEBUGP("ip_conntrack_expect_related %p\n", related_to);
--	DEBUGP("tuple: "); DUMP_TUPLE(&expect->tuple);
--	DEBUGP("mask:  "); DUMP_TUPLE(&expect->mask);
-+	DEBUGP("tuple: "); DUMP_TUPLE_RAW(&expect->tuple);
-+	DEBUGP("mask:  "); DUMP_TUPLE_RAW(&expect->mask);
- 
- 	old = LIST_FIND(&ip_conntrack_expect_list, resent_expect,
- 		        struct ip_conntrack_expect *, &expect->tuple, 
-@@ -1072,15 +1076,14 @@
- 
- 	MUST_BE_READ_LOCKED(&ip_conntrack_lock);
- 	WRITE_LOCK(&ip_conntrack_expect_tuple_lock);
--
- 	DEBUGP("change_expect:\n");
--	DEBUGP("exp tuple: "); DUMP_TUPLE(&expect->tuple);
--	DEBUGP("exp mask:  "); DUMP_TUPLE(&expect->mask);
--	DEBUGP("newtuple:  "); DUMP_TUPLE(newtuple);
-+	DEBUGP("exp tuple: "); DUMP_TUPLE_RAW(&expect->tuple);
-+	DEBUGP("exp mask:  "); DUMP_TUPLE_RAW(&expect->mask);
-+	DEBUGP("newtuple:  "); DUMP_TUPLE_RAW(newtuple);
- 	if (expect->ct_tuple.dst.protonum == 0) {
- 		/* Never seen before */
- 		DEBUGP("change expect: never seen before\n");
--		if (!ip_ct_tuple_equal(&expect->tuple, newtuple) 
-+		if (!ip_ct_tuple_mask_cmp(&expect->tuple, newtuple, &expect->mask)
- 		    && LIST_FIND(&ip_conntrack_expect_list, expect_clash,
- 			         struct ip_conntrack_expect *, newtuple, &expect->mask)) {
- 			/* Force NAT to find an unused tuple */
-diff -urN linux-2.4.29-old/net/ipv4/netfilter/ip_conntrack_pptp_priv.h linux-2.4.29-dev/net/ipv4/netfilter/ip_conntrack_pptp_priv.h
---- linux-2.4.29-old/net/ipv4/netfilter/ip_conntrack_pptp_priv.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29-dev/net/ipv4/netfilter/ip_conntrack_pptp_priv.h	2005-04-02 19:14:10.000000000 +0200
-@@ -0,0 +1,24 @@
-+#ifndef _IP_CT_PPTP_PRIV_H
-+#define _IP_CT_PPTP_PRIV_H
-+
-+/* PptpControlMessageType names */
-+static const char *strMName[] = {
-+	"UNKNOWN_MESSAGE",
-+	"START_SESSION_REQUEST",
-+	"START_SESSION_REPLY",
-+	"STOP_SESSION_REQUEST",
-+	"STOP_SESSION_REPLY",
-+	"ECHO_REQUEST",
-+	"ECHO_REPLY",
-+	"OUT_CALL_REQUEST",
-+	"OUT_CALL_REPLY",
-+	"IN_CALL_REQUEST",
-+	"IN_CALL_REPLY",
-+	"IN_CALL_CONNECT",
-+	"CALL_CLEAR_REQUEST",
-+	"CALL_DISCONNECT_NOTIFY",
-+	"WAN_ERROR_NOTIFY",
-+	"SET_LINK_INFO"
-+};
-+
-+#endif
-diff -urN linux-2.4.29-old/net/ipv4/netfilter/ip_conntrack_proto_gre.c linux-2.4.29-dev/net/ipv4/netfilter/ip_conntrack_proto_gre.c
---- linux-2.4.29-old/net/ipv4/netfilter/ip_conntrack_proto_gre.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29-dev/net/ipv4/netfilter/ip_conntrack_proto_gre.c	2005-04-02 19:14:31.000000000 +0200
-@@ -0,0 +1,333 @@
-+/*
-+ * ip_conntrack_proto_gre.c - Version 1.2 
-+ *
-+ * Connection tracking protocol helper module for GRE.
-+ *
-+ * GRE is a generic encapsulation protocol, which is generally not very
-+ * suited for NAT, as it has no protocol-specific part as port numbers.
-+ *
-+ * It has an optional key field, which may help us distinguishing two 
-+ * connections between the same two hosts.
-+ *
-+ * GRE is defined in RFC 1701 and RFC 1702, as well as RFC 2784 
-+ *
-+ * PPTP is built on top of a modified version of GRE, and has a mandatory
-+ * field called "CallID", which serves us for the same purpose as the key
-+ * field in plain GRE.
-+ *
-+ * Documentation about PPTP can be found in RFC 2637
-+ *
-+ * (C) 2000-2003 by Harald Welte <laforge@gnumonks.org>
-+ *
-+ * Development of this code funded by Astaro AG (http://www.astaro.com/)
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/timer.h>
-+#include <linux/netfilter.h>
-+#include <linux/ip.h>
-+#include <linux/in.h>
-+#include <linux/list.h>
-+
-+#include <linux/netfilter_ipv4/lockhelp.h>
-+
-+DECLARE_RWLOCK(ip_ct_gre_lock);
-+#define ASSERT_READ_LOCK(x) MUST_BE_READ_LOCKED(&ip_ct_gre_lock)
-+#define ASSERT_WRITE_LOCK(x) MUST_BE_WRITE_LOCKED(&ip_ct_gre_lock)
-+
-+#include <linux/netfilter_ipv4/listhelp.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_protocol.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_core.h>
-+
-+#include <linux/netfilter_ipv4/ip_conntrack_proto_gre.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_pptp.h>
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
-+MODULE_DESCRIPTION("netfilter connection tracking protocol helper for GRE");
-+
-+/* shamelessly stolen from ip_conntrack_proto_udp.c */
-+#define GRE_TIMEOUT		(30*HZ)
-+#define GRE_STREAM_TIMEOUT	(180*HZ)
-+
-+#if 0
-+#define DEBUGP(format, args...) printk(KERN_DEBUG __FILE__ ":" __FUNCTION__ \
-+		                       ": " format, ## args)
-+#define DUMP_TUPLE_GRE(x) printk("%u.%u.%u.%u:0x%x -> %u.%u.%u.%u:0x%x:%u:0x%x\n", \
-+			NIPQUAD((x)->src.ip), ntohl((x)->src.u.gre.key), \
-+			NIPQUAD((x)->dst.ip), ntohl((x)->dst.u.gre.key))
-+#else
-+#define DEBUGP(x, args...)
-+#define DUMP_TUPLE_GRE(x)
-+#endif
-+				
-+/* GRE KEYMAP HANDLING FUNCTIONS */
-+static LIST_HEAD(gre_keymap_list);
-+
-+static inline int gre_key_cmpfn(const struct ip_ct_gre_keymap *km,
-+				const struct ip_conntrack_tuple *t)
-+{
-+	return ((km->tuple.src.ip == t->src.ip) &&
-+		(km->tuple.dst.ip == t->dst.ip) &&
-+	        (km->tuple.dst.protonum == t->dst.protonum) &&
-+	        (km->tuple.dst.u.all == t->dst.u.all));
-+}
-+
-+/* look up the source key for a given tuple */
-+static u_int32_t gre_keymap_lookup(struct ip_conntrack_tuple *t)
-+{
-+	struct ip_ct_gre_keymap *km;
-+	u_int32_t key;
-+
-+	READ_LOCK(&ip_ct_gre_lock);
-+	km = LIST_FIND(&gre_keymap_list, gre_key_cmpfn,
-+			struct ip_ct_gre_keymap *, t);
-+	if (!km) {
-+		READ_UNLOCK(&ip_ct_gre_lock);
-+		return 0;
-+	}
-+
-+	key = km->tuple.src.u.gre.key;
-+	READ_UNLOCK(&ip_ct_gre_lock);
-+
-+	return key;
-+}
-+
-+/* add a single keymap entry, associate with specified expect */
-+int ip_ct_gre_keymap_add(struct ip_conntrack_expect *exp,
-+			 struct ip_conntrack_tuple *t, int reply)
-+{
-+	struct ip_ct_gre_keymap *km;
-+
-+	km = kmalloc(sizeof(*km), GFP_ATOMIC);
-+	if (!km)
-+		return -1;
-+
-+	/* initializing list head should be sufficient */
-+	memset(km, 0, sizeof(*km));
-+
-+	memcpy(&km->tuple, t, sizeof(*t));
-+
-+	if (!reply)
-+		exp->proto.gre.keymap_orig = km;
-+	else
-+		exp->proto.gre.keymap_reply = km;
-+
-+	DEBUGP("adding new entry %p: ", km);
-+	DUMP_TUPLE_GRE(&km->tuple);
-+
-+	WRITE_LOCK(&ip_ct_gre_lock);
-+	list_append(&gre_keymap_list, km);
-+	WRITE_UNLOCK(&ip_ct_gre_lock);
-+
-+	return 0;
-+}
-+
-+/* change the tuple of a keymap entry (used by nat helper) */
-+void ip_ct_gre_keymap_change(struct ip_ct_gre_keymap *km,
-+			     struct ip_conntrack_tuple *t)
-+{
-+	DEBUGP("changing entry %p to: ", km);
-+	DUMP_TUPLE_GRE(t);
-+
-+	WRITE_LOCK(&ip_ct_gre_lock);
-+	memcpy(&km->tuple, t, sizeof(km->tuple));
-+	WRITE_UNLOCK(&ip_ct_gre_lock);
-+}
-+
-+/* destroy the keymap entries associated with specified expect */
-+void ip_ct_gre_keymap_destroy(struct ip_conntrack_expect *exp)
-+{
-+	DEBUGP("entering for exp %p\n", exp);
-+	WRITE_LOCK(&ip_ct_gre_lock);
-+	if (exp->proto.gre.keymap_orig) {
-+		DEBUGP("removing %p from list\n", exp->proto.gre.keymap_orig);
-+		list_del(&exp->proto.gre.keymap_orig->list);
-+		kfree(exp->proto.gre.keymap_orig);
-+		exp->proto.gre.keymap_orig = NULL;
-+	}
-+	if (exp->proto.gre.keymap_reply) {
-+		DEBUGP("removing %p from list\n", exp->proto.gre.keymap_reply);
-+		list_del(&exp->proto.gre.keymap_reply->list);
-+		kfree(exp->proto.gre.keymap_reply);
-+		exp->proto.gre.keymap_reply = NULL;
-+	}
-+	WRITE_UNLOCK(&ip_ct_gre_lock);
-+}
-+
-+
-+/* PUBLIC CONNTRACK PROTO HELPER FUNCTIONS */
-+
-+/* invert gre part of tuple */
-+static int gre_invert_tuple(struct ip_conntrack_tuple *tuple,
-+			    const struct ip_conntrack_tuple *orig)
-+{
-+	tuple->dst.u.gre.key = orig->src.u.gre.key;
-+	tuple->src.u.gre.key = orig->dst.u.gre.key;
-+
-+	return 1;
-+}
-+
-+/* gre hdr info to tuple */
-+static int gre_pkt_to_tuple(const void *datah, size_t datalen,
-+			    struct ip_conntrack_tuple *tuple)
-+{
-+	struct gre_hdr *grehdr = (struct gre_hdr *) datah;
-+	struct gre_hdr_pptp *pgrehdr = (struct gre_hdr_pptp *) datah;
-+	u_int32_t srckey;
-+
-+	/* core guarantees 8 protocol bytes, no need for size check */
-+
-+	switch (grehdr->version) {
-+		case GRE_VERSION_1701:
-+			if (!grehdr->key) {
-+				DEBUGP("Can't track GRE without key\n");
-+				return 0;
-+			}
-+			tuple->dst.u.gre.key = *(gre_key(grehdr));
-+			break;
-+
-+		case GRE_VERSION_PPTP:
-+			if (ntohs(grehdr->protocol) != GRE_PROTOCOL_PPTP) {
-+				DEBUGP("GRE_VERSION_PPTP but unknown proto\n");
-+				return 0;
-+			}
-+			tuple->dst.u.gre.key = htonl(ntohs(pgrehdr->call_id));
-+			break;
-+
-+		default:
-+			printk(KERN_WARNING "unknown GRE version %hu\n",
-+				grehdr->version);
-+			return 0;
-+	}
-+
-+	srckey = gre_keymap_lookup(tuple);
-+
-+#if 0
-+	DEBUGP("found src key %x for tuple ", ntohl(srckey));
-+	DUMP_TUPLE_GRE(tuple);
-+#endif
-+	tuple->src.u.gre.key = srckey;
-+
-+	return 1;
-+}
-+
-+/* print gre part of tuple */
-+static unsigned int gre_print_tuple(char *buffer,
-+				    const struct ip_conntrack_tuple *tuple)
-+{
-+	return sprintf(buffer, "srckey=0x%x dstkey=0x%x ", 
-+			ntohl(tuple->src.u.gre.key),
-+			ntohl(tuple->dst.u.gre.key));
-+}
-+
-+/* print private data for conntrack */
-+static unsigned int gre_print_conntrack(char *buffer,
-+					const struct ip_conntrack *ct)
-+{
-+	return sprintf(buffer, "timeout=%u, stream_timeout=%u ",
-+		       (ct->proto.gre.timeout / HZ),
-+		       (ct->proto.gre.stream_timeout / HZ));
-+}
-+
-+/* Returns verdict for packet, and may modify conntrack */
-+static int gre_packet(struct ip_conntrack *ct,
-+		      struct iphdr *iph, size_t len,
-+		      enum ip_conntrack_info conntrackinfo)
-+{
-+	/* If we've seen traffic both ways, this is a GRE connection.
-+	 * Extend timeout. */
-+	if (ct->status & IPS_SEEN_REPLY) {
-+		ip_ct_refresh_acct(ct, ct->proto.gre.stream_timeout);
-+		/* Also, more likely to be important, and not a probe. */
-+		set_bit(IPS_ASSURED_BIT, &ct->status);
-+	} else
-+		ip_ct_refresh_acct(ct, ct->proto.gre.timeout);
-+	
-+	return NF_ACCEPT;
-+}
-+
-+/* Called when a new connection for this protocol found. */
-+static int gre_new(struct ip_conntrack *ct,
-+		   struct iphdr *iph, size_t len)
-+{ 
-+	DEBUGP(": ");
-+	DUMP_TUPLE_GRE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-+
-+	/* initialize to sane value.  Ideally a conntrack helper
-+	 * (e.g. in case of pptp) is increasing them */
-+	ct->proto.gre.stream_timeout = GRE_STREAM_TIMEOUT;
-+	ct->proto.gre.timeout = GRE_TIMEOUT;
-+
-+	return 1;
-+}
-+
-+/* Called when a conntrack entry has already been removed from the hashes
-+ * and is about to be deleted from memory */
-+static void gre_destroy(struct ip_conntrack *ct)
-+{
-+	struct ip_conntrack_expect *master = ct->master;
-+
-+	DEBUGP(" entering\n");
-+
-+	if (!master) {
-+		DEBUGP("no master exp for ct %p\n", ct);
-+		return;
-+	}
-+
-+	ip_ct_gre_keymap_destroy(master);
-+}
-+
-+/* protocol helper struct */
-+static struct ip_conntrack_protocol gre = { { NULL, NULL }, IPPROTO_GRE,
-+					    "gre", 
-+					    gre_pkt_to_tuple,
-+					    gre_invert_tuple,
-+					    gre_print_tuple,
-+					    gre_print_conntrack,
-+					    gre_packet,
-+					    gre_new,
-+					    gre_destroy,
-+					    NULL,
-+					    THIS_MODULE };
-+
-+/* ip_conntrack_proto_gre initialization */
-+static int __init init(void)
-+{
-+	int retcode;
-+
-+	if ((retcode = ip_conntrack_protocol_register(&gre))) {
-+                printk(KERN_ERR "Unable to register conntrack protocol "
-+			        "helper for gre: %d\n",	retcode);
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
-+
-+static void __exit fini(void)
-+{
-+	struct list_head *pos, *n;
-+
-+	/* delete all keymap entries */
-+	WRITE_LOCK(&ip_ct_gre_lock);
-+	list_for_each_safe(pos, n, &gre_keymap_list) {
-+		DEBUGP("deleting keymap %p at module unload time\n", pos);
-+		list_del(pos);
-+		kfree(pos);
-+	}
-+	WRITE_UNLOCK(&ip_ct_gre_lock);
-+
-+	ip_conntrack_protocol_unregister(&gre); 
-+}
-+
-+EXPORT_SYMBOL(ip_ct_gre_keymap_add);
-+EXPORT_SYMBOL(ip_ct_gre_keymap_change);
-+EXPORT_SYMBOL(ip_ct_gre_keymap_destroy);
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux-2.4.29-old/net/ipv4/netfilter/ip_nat_core.c linux-2.4.29-dev/net/ipv4/netfilter/ip_nat_core.c
---- linux-2.4.29-old/net/ipv4/netfilter/ip_nat_core.c	2005-01-19 15:10:13.000000000 +0100
-+++ linux-2.4.29-dev/net/ipv4/netfilter/ip_nat_core.c	2005-04-02 19:07:18.000000000 +0200
-@@ -424,7 +424,7 @@
- 	*tuple = *orig_tuple;
- 	while ((rptr = find_best_ips_proto_fast(tuple, mr, conntrack, hooknum))
- 	       != NULL) {
--		DEBUGP("Found best for "); DUMP_TUPLE(tuple);
-+		DEBUGP("Found best for "); DUMP_TUPLE_RAW(tuple);
- 		/* 3) The per-protocol part of the manip is made to
- 		   map into the range to make a unique tuple. */
- 
-@@ -564,9 +564,9 @@
- 		       HOOK2MANIP(hooknum)==IP_NAT_MANIP_SRC ? "SRC" : "DST",
- 		       conntrack);
- 		DEBUGP("Original: ");
--		DUMP_TUPLE(&orig_tp);
-+		DUMP_TUPLE_RAW(&orig_tp);
- 		DEBUGP("New: ");
--		DUMP_TUPLE(&new_tuple);
-+		DUMP_TUPLE_RAW(&new_tuple);
- #endif
- 
- 		/* We now have two tuples (SRCIP/SRCPT/DSTIP/DSTPT):
-diff -urN linux-2.4.29-old/net/ipv4/netfilter/ip_nat_pptp.c linux-2.4.29-dev/net/ipv4/netfilter/ip_nat_pptp.c
---- linux-2.4.29-old/net/ipv4/netfilter/ip_nat_pptp.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29-dev/net/ipv4/netfilter/ip_nat_pptp.c	2005-04-02 19:14:52.000000000 +0200
-@@ -0,0 +1,475 @@
-+/*
-+ * ip_nat_pptp.c	- Version 1.5
-+ *
-+ * NAT support for PPTP (Point to Point Tunneling Protocol).
-+ * PPTP is a a protocol for creating virtual private networks.
-+ * It is a specification defined by Microsoft and some vendors
-+ * working with Microsoft.  PPTP is built on top of a modified
-+ * version of the Internet Generic Routing Encapsulation Protocol.
-+ * GRE is defined in RFC 1701 and RFC 1702.  Documentation of
-+ * PPTP can be found in RFC 2637
-+ *
-+ * (C) 2000-2003 by Harald Welte <laforge@gnumonks.org>
-+ *
-+ * Development of this code funded by Astaro AG (http://www.astaro.com/)
-+ *
-+ * TODO: - Support for multiple calls within one session
-+ * 	   (needs netfilter newnat code)
-+ * 	 - NAT to a unique tuple, not to TCP source port
-+ * 	   (needs netfilter tuple reservation)
-+ *
-+ * Changes:
-+ *     2002-02-10 - Version 1.3
-+ *       - Use ip_nat_mangle_tcp_packet() because of cloned skb's
-+ *	   in local connections (Philip Craig <philipc@snapgear.com>)
-+ *       - add checks for magicCookie and pptp version
-+ *       - make argument list of pptp_{out,in}bound_packet() shorter
-+ *       - move to C99 style initializers
-+ *       - print version number at module loadtime
-+ *     2003-09-22 - Version 1.5
-+ *       - use SNATed tcp sourceport as callid, since we get called before
-+ *         TCP header is mangled (Philip Craig <philipc@snapgear.com>)
-+ * 
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <net/tcp.h>
-+#include <linux/netfilter_ipv4/ip_nat.h>
-+#include <linux/netfilter_ipv4/ip_nat_rule.h>
-+#include <linux/netfilter_ipv4/ip_nat_helper.h>
-+#include <linux/netfilter_ipv4/ip_nat_pptp.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_proto_gre.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_pptp.h>
-+
-+#define IP_NAT_PPTP_VERSION "1.5"
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
-+MODULE_DESCRIPTION("Netfilter NAT helper module for PPTP");
-+
-+
-+#if 0
-+#include "ip_conntrack_pptp_priv.h"
-+#define DEBUGP(format, args...) printk(KERN_DEBUG __FILE__ ":" __FUNCTION__ \
-+				       ": " format, ## args)
-+#else
-+#define DEBUGP(format, args...)
-+#endif
-+
-+static unsigned int
-+pptp_nat_expected(struct sk_buff **pskb,
-+		  unsigned int hooknum,
-+		  struct ip_conntrack *ct,
-+		  struct ip_nat_info *info)
-+{
-+	struct ip_conntrack *master = master_ct(ct);
-+	struct ip_nat_multi_range mr;
-+	struct ip_ct_pptp_master *ct_pptp_info;
-+	struct ip_nat_pptp *nat_pptp_info;
-+	u_int32_t newip, newcid;
-+	int ret;
-+
-+	IP_NF_ASSERT(info);
-+	IP_NF_ASSERT(master);
-+	IP_NF_ASSERT(!(info->initialized & (1 << HOOK2MANIP(hooknum))));
-+
-+	DEBUGP("we have a connection!\n");
-+
-+	LOCK_BH(&ip_pptp_lock);
-+	ct_pptp_info = &master->help.ct_pptp_info;
-+	nat_pptp_info = &master->nat.help.nat_pptp_info;
-+
-+	/* need to alter GRE tuple because conntrack expectfn() used 'wrong'
-+	 * (unmanipulated) values */
-+	if (HOOK2MANIP(hooknum) == IP_NAT_MANIP_DST) {
-+		DEBUGP("completing tuples with NAT info \n");
-+		/* we can do this, since we're unconfirmed */
-+		if (ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u.gre.key ==
-+			htonl(ct_pptp_info->pac_call_id)) {	
-+			/* assume PNS->PAC */
-+			ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.gre.key =
-+				htonl(nat_pptp_info->pns_call_id);
-+			ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u.gre.key =
-+				htonl(nat_pptp_info->pns_call_id);
-+			newip = master->tuplehash[IP_CT_DIR_REPLY].tuple.src.ip;
-+			newcid = htonl(nat_pptp_info->pac_call_id);
-+		} else {
-+			/* assume PAC->PNS */
-+			ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.gre.key =
-+				htonl(nat_pptp_info->pac_call_id);
-+			ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u.gre.key =
-+				htonl(nat_pptp_info->pac_call_id);
-+			newip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-+			newcid = htonl(nat_pptp_info->pns_call_id);
-+		}
-+	} else {
-+		if (ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u.gre.key ==
-+			htonl(ct_pptp_info->pac_call_id)) {	
-+			/* assume PNS->PAC */
-+			newip = master->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-+			newcid = htonl(ct_pptp_info->pns_call_id);
-+		}
-+		else {
-+			/* assume PAC->PNS */
-+			newip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip;
-+			newcid = htonl(ct_pptp_info->pac_call_id);
-+		}
-+	}
-+
-+	mr.rangesize = 1;
-+	mr.range[0].flags = IP_NAT_RANGE_MAP_IPS | IP_NAT_RANGE_PROTO_SPECIFIED;
-+	mr.range[0].min_ip = mr.range[0].max_ip = newip;
-+	mr.range[0].min = mr.range[0].max = 
-+		((union ip_conntrack_manip_proto ) { newcid }); 
-+	DEBUGP("change ip to %u.%u.%u.%u\n", 
-+		NIPQUAD(newip));
-+	DEBUGP("change key to 0x%x\n", ntohl(newcid));
-+	ret = ip_nat_setup_info(ct, &mr, hooknum);
-+
-+	UNLOCK_BH(&ip_pptp_lock);
-+
-+	return ret;
-+
-+}
-+
-+/* outbound packets == from PNS to PAC */
-+static inline unsigned int
-+pptp_outbound_pkt(struct sk_buff **pskb,
-+		  struct ip_conntrack *ct,
-+		  enum ip_conntrack_info ctinfo,
-+		  struct ip_conntrack_expect *exp)
-+
-+{
-+	struct iphdr *iph = (*pskb)->nh.iph;
-+	struct tcphdr *tcph = (void *) iph + iph->ihl*4;
-+	struct pptp_pkt_hdr *pptph = (struct pptp_pkt_hdr *) 
-+					((void *)tcph + tcph->doff*4);
-+
-+	struct PptpControlHeader *ctlh;
-+	union pptp_ctrl_union pptpReq;
-+	struct ip_ct_pptp_master *ct_pptp_info = &ct->help.ct_pptp_info;
-+	struct ip_nat_pptp *nat_pptp_info = &ct->nat.help.nat_pptp_info;
-+
-+	u_int16_t msg, *cid = NULL, new_callid;
-+
-+	/* FIXME: size checks !!! */
-+	ctlh = (struct PptpControlHeader *) ((void *) pptph + sizeof(*pptph));
-+	pptpReq.rawreq = (void *) ((void *) ctlh + sizeof(*ctlh));
-+
-+	new_callid = htons(ct_pptp_info->pns_call_id);
-+	
-+	switch (msg = ntohs(ctlh->messageType)) {
-+		case PPTP_OUT_CALL_REQUEST:
-+			cid = &pptpReq.ocreq->callID;
-+			/* FIXME: ideally we would want to reserve a call ID
-+			 * here.  current netfilter NAT core is not able to do
-+			 * this :( For now we use TCP source port. This breaks
-+			 * multiple calls within one control session */
-+
-+			/* save original call ID in nat_info */
-+			nat_pptp_info->pns_call_id = ct_pptp_info->pns_call_id;
-+
-+			/* don't use tcph->source since we are at a DSTmanip
-+			 * hook (e.g. PREROUTING) and pkt is not mangled yet */
-+			new_callid = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u.tcp.port;
-+
-+			/* save new call ID in ct info */
-+			ct_pptp_info->pns_call_id = ntohs(new_callid);
-+			break;
-+		case PPTP_IN_CALL_REPLY:
-+			cid = &pptpReq.icreq->callID;
-+			break;
-+		case PPTP_CALL_CLEAR_REQUEST:
-+			cid = &pptpReq.clrreq->callID;
-+			break;
-+		default:
-+			DEBUGP("unknown outbound packet 0x%04x:%s\n", msg,
-+			      (msg <= PPTP_MSG_MAX)? strMName[msg]:strMName[0]);
-+			/* fall through */
-+
-+		case PPTP_SET_LINK_INFO:
-+			/* only need to NAT in case PAC is behind NAT box */
-+		case PPTP_START_SESSION_REQUEST:
-+		case PPTP_START_SESSION_REPLY:
-+		case PPTP_STOP_SESSION_REQUEST:
-+		case PPTP_STOP_SESSION_REPLY:
-+		case PPTP_ECHO_REQUEST:
-+		case PPTP_ECHO_REPLY:
-+			/* no need to alter packet */
-+			return NF_ACCEPT;
-+	}
-+
-+	IP_NF_ASSERT(cid);
-+
-+	DEBUGP("altering call id from 0x%04x to 0x%04x\n",
-+		ntohs(*cid), ntohs(new_callid));
-+
-+	/* mangle packet */
-+	ip_nat_mangle_tcp_packet(pskb, ct, ctinfo, (void *)cid - (void *)pptph,
-+				 sizeof(new_callid), (char *)&new_callid,
-+				 sizeof(new_callid));
-+
-+	return NF_ACCEPT;
-+}
-+
-+/* inbound packets == from PAC to PNS */
-+static inline unsigned int
-+pptp_inbound_pkt(struct sk_buff **pskb,
-+		 struct ip_conntrack *ct,
-+		 enum ip_conntrack_info ctinfo,
-+		 struct ip_conntrack_expect *oldexp)
-+{
-+	struct iphdr *iph = (*pskb)->nh.iph;
-+	struct tcphdr *tcph = (void *) iph + iph->ihl*4;
-+	struct pptp_pkt_hdr *pptph = (struct pptp_pkt_hdr *) 
-+					((void *)tcph + tcph->doff*4);
-+
-+	struct PptpControlHeader *ctlh;
-+	union pptp_ctrl_union pptpReq;
-+	struct ip_ct_pptp_master *ct_pptp_info = &ct->help.ct_pptp_info;
-+	struct ip_nat_pptp *nat_pptp_info = &ct->nat.help.nat_pptp_info;
-+
-+	u_int16_t msg, new_cid = 0, new_pcid, *pcid = NULL, *cid = NULL;
-+	u_int32_t old_dst_ip;
-+
-+	struct ip_conntrack_tuple t, inv_t;
-+	struct ip_conntrack_tuple *orig_t, *reply_t;
-+
-+	/* FIXME: size checks !!! */
-+	ctlh = (struct PptpControlHeader *) ((void *) pptph + sizeof(*pptph));
-+	pptpReq.rawreq = (void *) ((void *) ctlh + sizeof(*ctlh));
-+
-+	new_pcid = htons(nat_pptp_info->pns_call_id);
-+
-+	switch (msg = ntohs(ctlh->messageType)) {
-+	case PPTP_OUT_CALL_REPLY:
-+		pcid = &pptpReq.ocack->peersCallID;	
-+		cid = &pptpReq.ocack->callID;
-+		if (!oldexp) {
-+			DEBUGP("outcall but no expectation\n");
-+			break;
-+		}
-+		old_dst_ip = oldexp->tuple.dst.ip;
-+		t = oldexp->tuple;
-+		invert_tuplepr(&inv_t, &t);
-+
-+		/* save original PAC call ID in nat_info */
-+		nat_pptp_info->pac_call_id = ct_pptp_info->pac_call_id;
-+
-+		/* alter expectation */
-+		orig_t = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+		reply_t = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
-+		if (t.src.ip == orig_t->src.ip && t.dst.ip == orig_t->dst.ip) {
-+			/* expectation for PNS->PAC direction */
-+			t.src.u.gre.key = htonl(nat_pptp_info->pns_call_id);
-+			t.dst.u.gre.key = htonl(ct_pptp_info->pac_call_id);
-+			inv_t.src.ip = reply_t->src.ip;
-+			inv_t.dst.ip = reply_t->dst.ip;
-+			inv_t.src.u.gre.key = htonl(nat_pptp_info->pac_call_id);
-+			inv_t.dst.u.gre.key = htonl(ct_pptp_info->pns_call_id);
-+		} else {
-+			/* expectation for PAC->PNS direction */
-+			t.src.u.gre.key = htonl(nat_pptp_info->pac_call_id);
-+			t.dst.u.gre.key = htonl(ct_pptp_info->pns_call_id);
-+			inv_t.src.ip = orig_t->src.ip;
-+			inv_t.dst.ip = orig_t->dst.ip;
-+			inv_t.src.u.gre.key = htonl(nat_pptp_info->pns_call_id);
-+			inv_t.dst.u.gre.key = htonl(ct_pptp_info->pac_call_id);
-+		}
-+
-+		if (!ip_conntrack_change_expect(oldexp, &t)) {
-+			DEBUGP("successfully changed expect\n");
-+		} else {
-+			DEBUGP("can't change expect\n");
-+		}
-+		ip_ct_gre_keymap_change(oldexp->proto.gre.keymap_orig, &t);
-+		ip_ct_gre_keymap_change(oldexp->proto.gre.keymap_reply, &inv_t);
-+		break;
-+	case PPTP_IN_CALL_CONNECT:
-+		pcid = &pptpReq.iccon->peersCallID;
-+		if (!oldexp)
-+			break;
-+		old_dst_ip = oldexp->tuple.dst.ip;
-+		t = oldexp->tuple;
-+
-+		/* alter expectation, no need for callID */
-+		if (t.dst.ip == ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip) {
-+			/* expectation for PNS->PAC direction */
-+			t.src.ip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-+		} else {
-+			/* expectation for PAC->PNS direction */
-+			t.dst.ip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-+		}
-+
-+		if (!ip_conntrack_change_expect(oldexp, &t)) {
-+			DEBUGP("successfully changed expect\n");
-+		} else {
-+			DEBUGP("can't change expect\n");
-+		}
-+		break;
-+	case PPTP_IN_CALL_REQUEST:
-+		/* only need to nat in case PAC is behind NAT box */
-+		break;
-+	case PPTP_WAN_ERROR_NOTIFY:
-+		pcid = &pptpReq.wanerr->peersCallID;
-+		break;
-+	case PPTP_CALL_DISCONNECT_NOTIFY:
-+		pcid = &pptpReq.disc->callID;
-+		break;
-+
-+	default:
-+		DEBUGP("unknown inbound packet %s\n",
-+			(msg <= PPTP_MSG_MAX)? strMName[msg]:strMName[0]);
-+		/* fall through */
-+
-+	case PPTP_START_SESSION_REQUEST:
-+	case PPTP_START_SESSION_REPLY:
-+	case PPTP_STOP_SESSION_REQUEST:
-+	case PPTP_STOP_SESSION_REPLY:
-+	case PPTP_ECHO_REQUEST:
-+	case PPTP_ECHO_REPLY:
-+		/* no need to alter packet */
-+		return NF_ACCEPT;
-+	}
-+
-+	/* mangle packet */
-+	IP_NF_ASSERT(pcid);
-+	DEBUGP("altering peer call id from 0x%04x to 0x%04x\n",
-+		ntohs(*pcid), ntohs(new_pcid));
-+	ip_nat_mangle_tcp_packet(pskb, ct, ctinfo, (void *)pcid - (void *)pptph,
-+				 sizeof(new_pcid), (char *)&new_pcid, 
-+				 sizeof(new_pcid));
-+
-+	if (new_cid) {
-+		IP_NF_ASSERT(cid);
-+		DEBUGP("altering call id from 0x%04x to 0x%04x\n",
-+			ntohs(*cid), ntohs(new_cid));
-+		ip_nat_mangle_tcp_packet(pskb, ct, ctinfo, 
-+					 (void *)cid - (void *)pptph, 
-+					 sizeof(new_cid), (char *)&new_cid, 
-+					 sizeof(new_cid));
-+	}
-+
-+	/* great, at least we don't need to resize packets */
-+	return NF_ACCEPT;
-+}
-+
-+
-+static unsigned int tcp_help(struct ip_conntrack *ct,
-+			     struct ip_conntrack_expect *exp,
-+			     struct ip_nat_info *info,
-+			     enum ip_conntrack_info ctinfo,
-+			     unsigned int hooknum, struct sk_buff **pskb)
-+{
-+	struct iphdr *iph = (*pskb)->nh.iph;
-+	struct tcphdr *tcph = (void *) iph + iph->ihl*4;
-+	unsigned int datalen = (*pskb)->len - iph->ihl*4 - tcph->doff*4;
-+	struct pptp_pkt_hdr *pptph;
-+
-+	int dir;
-+
-+	DEBUGP("entering\n");
-+
-+	/* Only mangle things once: DST for original direction
-+	   and SRC for reply direction. */
-+	dir = CTINFO2DIR(ctinfo);
-+	if (!((HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC
-+	     && dir == IP_CT_DIR_ORIGINAL)
-+	      || (HOOK2MANIP(hooknum) == IP_NAT_MANIP_DST
-+		  && dir == IP_CT_DIR_REPLY))) {
-+		DEBUGP("Not touching dir %s at hook %s\n",
-+		       dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY",
-+		       hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-+		       : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-+		       : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT"
-+		       : hooknum == NF_IP_LOCAL_IN ? "INPUT" : "???");
-+		return NF_ACCEPT;
-+	}
-+
-+	/* if packet is too small, just skip it */
-+	if (datalen < sizeof(struct pptp_pkt_hdr)+
-+		      sizeof(struct PptpControlHeader)) {
-+		DEBUGP("pptp packet too short\n");
-+		return NF_ACCEPT;	
-+	}
-+
-+	pptph = (struct pptp_pkt_hdr *) ((void *)tcph + tcph->doff*4);
-+
-+	/* if it's not a control message, we can't handle it */
-+	if (ntohs(pptph->packetType) != PPTP_PACKET_CONTROL ||
-+	    ntohl(pptph->magicCookie) != PPTP_MAGIC_COOKIE) {
-+		DEBUGP("not a pptp control packet\n");
-+		return NF_ACCEPT;
-+	}
-+
-+	LOCK_BH(&ip_pptp_lock);
-+
-+	if (dir == IP_CT_DIR_ORIGINAL) {
-+		/* reuqests sent by client to server (PNS->PAC) */
-+		pptp_outbound_pkt(pskb, ct, ctinfo, exp);
-+	} else {
-+		/* response from the server to the client (PAC->PNS) */
-+		pptp_inbound_pkt(pskb, ct, ctinfo, exp);
-+	}
-+
-+	UNLOCK_BH(&ip_pptp_lock);
-+
-+	return NF_ACCEPT;
-+}
-+
-+/* nat helper struct for control connection */
-+static struct ip_nat_helper pptp_tcp_helper = { 
-+	.list = { NULL, NULL },
-+	.name = "pptp", 
-+	.flags = IP_NAT_HELPER_F_ALWAYS, 
-+	.me = THIS_MODULE,
-+	.tuple = { .src = { .ip = 0, 
-+			    .u = { .tcp = { .port = 
-+				    	__constant_htons(PPTP_CONTROL_PORT) } 
-+				 } 
-+			  },
-+	  	   .dst = { .ip = 0, 
-+			    .u = { .all = 0 }, 
-+			    .protonum = IPPROTO_TCP 
-+		   	  } 
-+		 },
-+
-+	.mask = { .src = { .ip = 0, 
-+			   .u = { .tcp = { .port = 0xFFFF } } 
-+			 },
-+		  .dst = { .ip = 0, 
-+			   .u = { .all = 0 }, 
-+			   .protonum = 0xFFFF 
-+		  	 } 
-+		},
-+	.help = tcp_help, 
-+	.expect = pptp_nat_expected 
-+};
-+
-+			  
-+static int __init init(void)
-+{
-+	DEBUGP("%s: registering NAT helper\n", __FILE__);
-+	if (ip_nat_helper_register(&pptp_tcp_helper)) {
-+		printk(KERN_ERR "Unable to register NAT application helper "
-+				"for pptp\n");
-+		return -EIO;
-+	}
-+
-+	printk("ip_nat_pptp version %s loaded\n", IP_NAT_PPTP_VERSION);
-+	return 0;
-+}
-+
-+static void __exit fini(void)
-+{
-+	DEBUGP("cleanup_module\n" );
-+	ip_nat_helper_unregister(&pptp_tcp_helper);
-+	printk("ip_nat_pptp version %s unloaded\n", IP_NAT_PPTP_VERSION);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux-2.4.29-old/net/ipv4/netfilter/ip_nat_proto_gre.c linux-2.4.29-dev/net/ipv4/netfilter/ip_nat_proto_gre.c
---- linux-2.4.29-old/net/ipv4/netfilter/ip_nat_proto_gre.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.29-dev/net/ipv4/netfilter/ip_nat_proto_gre.c	2005-04-02 19:15:10.000000000 +0200
-@@ -0,0 +1,202 @@
-+/*
-+ * ip_nat_proto_gre.c - Version 1.2
-+ *
-+ * NAT protocol helper module for GRE.
-+ *
-+ * GRE is a generic encapsulation protocol, which is generally not very
-+ * suited for NAT, as it has no protocol-specific part as port numbers.
-+ *
-+ * It has an optional key field, which may help us distinguishing two 
-+ * connections between the same two hosts.
-+ *
-+ * GRE is defined in RFC 1701 and RFC 1702, as well as RFC 2784 
-+ *
-+ * PPTP is built on top of a modified version of GRE, and has a mandatory
-+ * field called "CallID", which serves us for the same purpose as the key
-+ * field in plain GRE.
-+ *
-+ * Documentation about PPTP can be found in RFC 2637
-+ *
-+ * (C) 2000-2003 by Harald Welte <laforge@gnumonks.org>
-+ *
-+ * Development of this code funded by Astaro AG (http://www.astaro.com/)
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/netfilter_ipv4/ip_nat.h>
-+#include <linux/netfilter_ipv4/ip_nat_rule.h>
-+#include <linux/netfilter_ipv4/ip_nat_protocol.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_proto_gre.h>
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
-+MODULE_DESCRIPTION("Netfilter NAT protocol helper module for GRE");
-+
-+#if 0
-+#define DEBUGP(format, args...) printk(KERN_DEBUG __FILE__ ":" __FUNCTION__ \
-+				       ": " format, ## args)
-+#else
-+#define DEBUGP(x, args...)
-+#endif
-+
-+/* is key in given range between min and max */
-+static int
-+gre_in_range(const struct ip_conntrack_tuple *tuple,
-+	     enum ip_nat_manip_type maniptype,
-+	     const union ip_conntrack_manip_proto *min,
-+	     const union ip_conntrack_manip_proto *max)
-+{
-+	u_int32_t key;
-+
-+	if (maniptype == IP_NAT_MANIP_SRC)
-+		key = tuple->src.u.gre.key;
-+	else
-+		key = tuple->dst.u.gre.key;
-+
-+	return ntohl(key) >= ntohl(min->gre.key)
-+		&& ntohl(key) <= ntohl(max->gre.key);
-+}
-+
-+/* generate unique tuple ... */
-+static int 
-+gre_unique_tuple(struct ip_conntrack_tuple *tuple,
-+		 const struct ip_nat_range *range,
-+		 enum ip_nat_manip_type maniptype,
-+		 const struct ip_conntrack *conntrack)
-+{
-+	u_int32_t min, i, range_size;
-+	u_int32_t key = 0, *keyptr;
-+
-+	if (maniptype == IP_NAT_MANIP_SRC)
-+		keyptr = &tuple->src.u.gre.key;
-+	else
-+		keyptr = &tuple->dst.u.gre.key;
-+
-+	if (!(range->flags & IP_NAT_RANGE_PROTO_SPECIFIED)) {
-+
-+		DEBUGP("%p: NATing GRE PPTP\n", conntrack);
-+		min = 1;
-+		range_size = 0xffff;
-+
-+	} else {
-+		min = ntohl(range->min.gre.key);
-+		range_size = ntohl(range->max.gre.key) - min + 1;
-+	}
-+
-+	DEBUGP("min = %u, range_size = %u\n", min, range_size); 
-+
-+	for (i = 0; i < range_size; i++, key++) {
-+		*keyptr = htonl(min + key % range_size);
-+		if (!ip_nat_used_tuple(tuple, conntrack))
-+			return 1;
-+	}
-+
-+	DEBUGP("%p: no NAT mapping\n", conntrack);
-+
-+	return 0;
-+}
-+
-+/* manipulate a GRE packet according to maniptype */
-+static void 
-+gre_manip_pkt(struct iphdr *iph, size_t len, 
-+	      const struct ip_conntrack_manip *manip,
-+	      enum ip_nat_manip_type maniptype)
-+{
-+	struct gre_hdr *greh = (struct gre_hdr *)((u_int32_t *)iph+iph->ihl);
-+	struct gre_hdr_pptp *pgreh = (struct gre_hdr_pptp *) greh;
-+
-+	/* we only have destination manip of a packet, since 'source key' 
-+	 * is not present in the packet itself */
-+	if (maniptype == IP_NAT_MANIP_DST) {
-+		/* key manipulation is always dest */
-+		switch (greh->version) {
-+		case 0:
-+			if (!greh->key) {
-+				DEBUGP("can't nat GRE w/o key\n");
-+				break;
-+			}
-+			if (greh->csum) {
-+				/* FIXME: Never tested this code... */
-+				*(gre_csum(greh)) = 
-+					ip_nat_cheat_check(~*(gre_key(greh)),
-+							manip->u.gre.key,
-+							*(gre_csum(greh)));
-+			}
-+			*(gre_key(greh)) = manip->u.gre.key;
-+			break;
-+		case GRE_VERSION_PPTP:
-+			DEBUGP("call_id -> 0x%04x\n", 
-+				ntohl(manip->u.gre.key));
-+			pgreh->call_id = htons(ntohl(manip->u.gre.key));
-+			break;
-+		default:
-+			DEBUGP("can't nat unknown GRE version\n");
-+			break;
-+		}
-+	}
-+}
-+
-+/* print out a nat tuple */
-+static unsigned int 
-+gre_print(char *buffer, 
-+	  const struct ip_conntrack_tuple *match,
-+	  const struct ip_conntrack_tuple *mask)
-+{
-+	unsigned int len = 0;
-+
-+	if (mask->src.u.gre.key)
-+		len += sprintf(buffer + len, "srckey=0x%x ", 
-+				ntohl(match->src.u.gre.key));
-+
-+	if (mask->dst.u.gre.key)
-+		len += sprintf(buffer + len, "dstkey=0x%x ",
-+				ntohl(match->src.u.gre.key));
-+
-+	return len;
-+}
-+
-+/* print a range of keys */
-+static unsigned int 
-+gre_print_range(char *buffer, const struct ip_nat_range *range)
-+{
-+	if (range->min.gre.key != 0 
-+	    || range->max.gre.key != 0xFFFF) {
-+		if (range->min.gre.key == range->max.gre.key)
-+			return sprintf(buffer, "key 0x%x ",
-+					ntohl(range->min.gre.key));
-+		else
-+			return sprintf(buffer, "keys 0x%u-0x%u ",
-+					ntohl(range->min.gre.key),
-+					ntohl(range->max.gre.key));
-+	} else
-+		return 0;
-+}
-+
-+/* nat helper struct */
-+static struct ip_nat_protocol gre = 
-+	{ { NULL, NULL }, "GRE", IPPROTO_GRE,
-+	  gre_manip_pkt,
-+	  gre_in_range,
-+	  gre_unique_tuple,
-+	  gre_print,
-+	  gre_print_range 
-+	};
-+				  
-+static int __init init(void)
-+{
-+        if (ip_nat_protocol_register(&gre))
-+                return -EIO;
-+
-+        return 0;
-+}
-+
-+static void __exit fini(void)
-+{
-+        ip_nat_protocol_unregister(&gre);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux-2.4.29-old/net/ipv4/netfilter/Makefile linux-2.4.29-dev/net/ipv4/netfilter/Makefile
---- linux-2.4.29-old/net/ipv4/netfilter/Makefile	2005-04-02 19:04:11.000000000 +0200
-+++ linux-2.4.29-dev/net/ipv4/netfilter/Makefile	2005-04-02 19:07:18.000000000 +0200
-@@ -36,23 +36,32 @@
- ifdef CONFIG_IP_NF_AMANDA
- 	export-objs += ip_conntrack_amanda.o
- endif
--
- obj-$(CONFIG_IP_NF_TFTP) += ip_conntrack_tftp.o
- obj-$(CONFIG_IP_NF_FTP) += ip_conntrack_ftp.o
- ifdef CONFIG_IP_NF_FTP
- 	export-objs += ip_conntrack_ftp.o
- endif
--
- obj-$(CONFIG_IP_NF_IRC) += ip_conntrack_irc.o
- ifdef CONFIG_IP_NF_IRC
- 	export-objs += ip_conntrack_irc.o
- endif
-+obj-$(CONFIG_IP_NF_CT_PROTO_GRE) += ip_conntrack_proto_gre.o
-+ifdef CONFIG_IP_NF_CT_PROTO_GRE
-+	export-objs += ip_conntrack_proto_gre.o
-+endif
-+obj-$(CONFIG_IP_NF_PPTP) += ip_conntrack_pptp.o
-+ifdef CONFIG_IP_NF_NAT_PPTP
-+	export-objs += ip_conntrack_pptp.o
-+endif
-+
- 
- # NAT helpers 
- obj-$(CONFIG_IP_NF_NAT_AMANDA) += ip_nat_amanda.o
- obj-$(CONFIG_IP_NF_NAT_TFTP) += ip_nat_tftp.o
- obj-$(CONFIG_IP_NF_NAT_FTP) += ip_nat_ftp.o
- obj-$(CONFIG_IP_NF_NAT_IRC) += ip_nat_irc.o
-+obj-$(CONFIG_IP_NF_NAT_PROTO_GRE) += ip_nat_proto_gre.o
-+obj-$(CONFIG_IP_NF_NAT_PPTP) += ip_nat_pptp.o
- 
- # generic IP tables 
- obj-$(CONFIG_IP_NF_IPTABLES) += ip_tables.o
---- linux-2.4.32/net/ipv4/netfilter/ip_conntrack_pptp.c	1970-01-01 01:00:00.000000000 +0100
-+++ /home/florian//openwrt/trunk/openwrt/build_mipsel/linux/net/ipv4/netfilter/ip_conntrack_pptp.c	2006-02-04 18:23:27.000000000 +0100
-@@ -0,0 +1,635 @@
-+/*
-+ * ip_conntrack_pptp.c	- Version 1.9
-+ *
-+ * Connection tracking support for PPTP (Point to Point Tunneling Protocol).
-+ * PPTP is a a protocol for creating virtual private networks.
-+ * It is a specification defined by Microsoft and some vendors
-+ * working with Microsoft.  PPTP is built on top of a modified
-+ * version of the Internet Generic Routing Encapsulation Protocol.
-+ * GRE is defined in RFC 1701 and RFC 1702.  Documentation of
-+ * PPTP can be found in RFC 2637
-+ *
-+ * (C) 2000-2003 by Harald Welte <laforge@gnumonks.org>
-+ *
-+ * Development of this code funded by Astaro AG (http://www.astaro.com/)
-+ *
-+ * Limitations:
-+ * 	 - We blindly assume that control connections are always
-+ * 	   established in PNS->PAC direction.  This is a violation
-+ * 	   of RFFC2673
-+ *
-+ * TODO: - finish support for multiple calls within one session
-+ * 	   (needs expect reservations in newnat)
-+ *	 - testing of incoming PPTP calls 
-+ *
-+ * Changes: 
-+ * 	2002-02-05 - Version 1.3
-+ * 	  - Call ip_conntrack_unexpect_related() from 
-+ * 	    pptp_timeout_related() to destroy expectations in case
-+ * 	    CALL_DISCONNECT_NOTIFY or tcp fin packet was seen
-+ * 	    (Philip Craig <philipc@snapgear.com>)
-+ * 	  - Add Version information at module loadtime
-+ * 	2002-02-10 - Version 1.6
-+ * 	  - move to C99 style initializers
-+ * 	  - remove second expectation if first arrives
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/netfilter.h>
-+#include <linux/ip.h>
-+#include <net/checksum.h>
-+#include <net/tcp.h>
-+
-+#include <linux/netfilter_ipv4/lockhelp.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_proto_gre.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_pptp.h>
-+
-+#define IP_CT_PPTP_VERSION "1.9"
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
-+MODULE_DESCRIPTION("Netfilter connection tracking helper module for PPTP");
-+
-+DECLARE_LOCK(ip_pptp_lock);
-+
-+#if 0
-+#include "ip_conntrack_pptp_priv.h"
-+#define DEBUGP(format, args...)	printk(KERN_DEBUG __FILE__ ":" __FUNCTION__ \
-+					": " format, ## args)
-+#else
-+#define DEBUGP(format, args...)
-+#endif
-+
-+#define SECS *HZ
-+#define MINS * 60 SECS
-+#define HOURS * 60 MINS
-+#define DAYS * 24 HOURS
-+
-+#define PPTP_GRE_TIMEOUT 		(10 MINS)
-+#define PPTP_GRE_STREAM_TIMEOUT 	(5 DAYS)
-+
-+static int pptp_expectfn(struct ip_conntrack *ct)
-+{
-+	struct ip_conntrack *master;
-+	struct ip_conntrack_expect *exp;
-+
-+	DEBUGP("increasing timeouts\n");
-+	/* increase timeout of GRE data channel conntrack entry */
-+	ct->proto.gre.timeout = PPTP_GRE_TIMEOUT;
-+	ct->proto.gre.stream_timeout = PPTP_GRE_STREAM_TIMEOUT;
-+
-+	master = master_ct(ct);
-+	if (!master) {
-+		DEBUGP(" no master!!!\n");
-+		return 0;
-+	}
-+
-+	exp = ct->master;
-+	if (!exp) {
-+		DEBUGP("no expectation!!\n");
-+		return 0;
-+	}
-+
-+	DEBUGP("completing tuples with ct info\n");
-+	/* we can do this, since we're unconfirmed */
-+	if (ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u.gre.key == 
-+		htonl(master->help.ct_pptp_info.pac_call_id)) {	
-+		/* assume PNS->PAC */
-+		ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.gre.key = 
-+			htonl(master->help.ct_pptp_info.pns_call_id);
-+		ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u.gre.key =
-+			htonl(master->help.ct_pptp_info.pns_call_id);
-+	} else {
-+		/* assume PAC->PNS */
-+		ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.gre.key =
-+			htonl(master->help.ct_pptp_info.pac_call_id);
-+		ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u.gre.key =
-+			htonl(master->help.ct_pptp_info.pac_call_id);
-+	}
-+	
-+	/* delete other expectation */
-+	if (exp->expected_list.next != &exp->expected_list) {
-+		struct ip_conntrack_expect *other_exp;
-+		struct list_head *cur_item, *next;
-+
-+		for (cur_item = master->sibling_list.next;
-+		     cur_item != &master->sibling_list; cur_item = next) {
-+			next = cur_item->next;
-+			other_exp = list_entry(cur_item,
-+					       struct ip_conntrack_expect,
-+					       expected_list);
-+			/* remove only if occurred at same sequence number */
-+			if (other_exp != exp && other_exp->seq == exp->seq) {
-+				DEBUGP("unexpecting other direction\n");
-+				ip_ct_gre_keymap_destroy(other_exp);
-+				ip_conntrack_unexpect_related(other_exp);
-+			}
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+/* timeout GRE data connections */
-+static int pptp_timeout_related(struct ip_conntrack *ct)
-+{
-+	struct list_head *cur_item, *next;
-+	struct ip_conntrack_expect *exp;
-+	enum ip_conntrack_info ctinfo;
-+	struct iphdr *iph;
-+
-+	/* FIXME: do we have to lock something ? */
-+	for (cur_item = ct->sibling_list.next;
-+	    cur_item != &ct->sibling_list; cur_item = next) {
-+		next = cur_item->next;
-+		exp = list_entry(cur_item, struct ip_conntrack_expect,
-+				 expected_list);
-+
-+		ip_ct_gre_keymap_destroy(exp);
-+		if (!exp->sibling) {
-+			ip_conntrack_unexpect_related(exp);
-+			continue;
-+		}
-+
-+		DEBUGP("setting timeout of conntrack %p to 0\n",
-+			exp->sibling);
-+		exp->sibling->proto.gre.timeout = 0;
-+		exp->sibling->proto.gre.stream_timeout = 0;
-+		ip_ct_refresh_acct(exp->sibling, ctinfo, iph, 0);
-+	}
-+
-+	return 0;
-+}
-+
-+/* expect GRE connections (PNS->PAC and PAC->PNS direction) */
-+static inline int
-+exp_gre(struct ip_conntrack *master,
-+	u_int32_t seq,
-+	u_int16_t callid,
-+	u_int16_t peer_callid)
-+{
-+	struct ip_conntrack_expect exp;
-+	struct ip_conntrack_tuple inv_tuple;
-+
-+	memset(&exp, 0, sizeof(exp));
-+	/* tuple in original direction, PNS->PAC */
-+	exp.tuple.src.ip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-+	exp.tuple.src.u.gre.key = htonl(ntohs(peer_callid));
-+	exp.tuple.dst.ip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip;
-+	exp.tuple.dst.u.gre.key = htonl(ntohs(callid));
-+	exp.tuple.dst.protonum = IPPROTO_GRE;
-+
-+	exp.mask.src.ip = 0xffffffff;
-+	exp.mask.src.u.all = 0;
-+	exp.mask.dst.u.all = 0;
-+	exp.mask.dst.u.gre.key = 0xffffffff;
-+	exp.mask.dst.ip = 0xffffffff;
-+	exp.mask.dst.protonum = 0xffff;
-+			
-+	exp.seq = seq;
-+	exp.expectfn = pptp_expectfn;
-+
-+	exp.help.exp_pptp_info.pac_call_id = ntohs(callid);
-+	exp.help.exp_pptp_info.pns_call_id = ntohs(peer_callid);
-+
-+	DEBUGP("calling expect_related ");
-+	DUMP_TUPLE_RAW(&exp.tuple);
-+	
-+	/* Add GRE keymap entries */
-+	if (ip_ct_gre_keymap_add(&exp, &exp.tuple, 0) != 0)
-+		return 1;
-+
-+	invert_tuplepr(&inv_tuple, &exp.tuple);
-+	if (ip_ct_gre_keymap_add(&exp, &inv_tuple, 1) != 0) {
-+		ip_ct_gre_keymap_destroy(&exp);
-+		return 1;
-+	}
-+	
-+	if (ip_conntrack_expect_related(master, &exp) != 0) {
-+		ip_ct_gre_keymap_destroy(&exp);
-+		DEBUGP("cannot expect_related()\n");
-+		return 1;
-+	}
-+
-+	/* tuple in reply direction, PAC->PNS */
-+	exp.tuple.src.ip = master->tuplehash[IP_CT_DIR_REPLY].tuple.src.ip;
-+	exp.tuple.src.u.gre.key = htonl(ntohs(callid));
-+	exp.tuple.dst.ip = master->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-+	exp.tuple.dst.u.gre.key = htonl(ntohs(peer_callid));
-+
-+	DEBUGP("calling expect_related ");
-+	DUMP_TUPLE_RAW(&exp.tuple);
-+	
-+	/* Add GRE keymap entries */
-+	ip_ct_gre_keymap_add(&exp, &exp.tuple, 0);
-+	invert_tuplepr(&inv_tuple, &exp.tuple);
-+	ip_ct_gre_keymap_add(&exp, &inv_tuple, 1);
-+	/* FIXME: cannot handle error correctly, since we need to free
-+	 * the above keymap :( */
-+	
-+	if (ip_conntrack_expect_related(master, &exp) != 0) {
-+		/* free the second pair of keypmaps */
-+		ip_ct_gre_keymap_destroy(&exp);
-+		DEBUGP("cannot expect_related():\n");
-+		return 1;
-+	}
-+
-+	return 0;
-+}
-+
-+static inline int 
-+pptp_inbound_pkt(struct tcphdr *tcph,
-+		 struct pptp_pkt_hdr *pptph, 
-+		 size_t datalen,
-+		 struct ip_conntrack *ct,
-+		 enum ip_conntrack_info ctinfo)
-+{
-+	struct PptpControlHeader *ctlh;
-+        union pptp_ctrl_union pptpReq;
-+	
-+	struct ip_ct_pptp_master *info = &ct->help.ct_pptp_info;
-+	u_int16_t msg, *cid, *pcid;
-+	u_int32_t seq;	
-+
-+	ctlh = (struct PptpControlHeader *) 
-+		((char *) pptph + sizeof(struct pptp_pkt_hdr));
-+	pptpReq.rawreq = (void *) 
-+		((char *) ctlh + sizeof(struct PptpControlHeader));
-+
-+	msg = ntohs(ctlh->messageType);
-+	DEBUGP("inbound control message %s\n", strMName[msg]);
-+
-+	switch (msg) {
-+	case PPTP_START_SESSION_REPLY:
-+		/* server confirms new control session */
-+		if (info->sstate < PPTP_SESSION_REQUESTED) {
-+			DEBUGP("%s without START_SESS_REQUEST\n",
-+				strMName[msg]);
-+			break;
-+		}
-+		if (pptpReq.srep->resultCode == PPTP_START_OK)
-+			info->sstate = PPTP_SESSION_CONFIRMED;
-+		else 
-+			info->sstate = PPTP_SESSION_ERROR;
-+		break;
-+
-+	case PPTP_STOP_SESSION_REPLY:
-+		/* server confirms end of control session */
-+		if (info->sstate > PPTP_SESSION_STOPREQ) {
-+			DEBUGP("%s without STOP_SESS_REQUEST\n",
-+				strMName[msg]);
-+			break;
-+		}
-+		if (pptpReq.strep->resultCode == PPTP_STOP_OK)
-+			info->sstate = PPTP_SESSION_NONE;
-+		else
-+			info->sstate = PPTP_SESSION_ERROR;
-+		break;
-+
-+	case PPTP_OUT_CALL_REPLY:
-+		/* server accepted call, we now expect GRE frames */
-+		if (info->sstate != PPTP_SESSION_CONFIRMED) {
-+			DEBUGP("%s but no session\n", strMName[msg]);
-+			break;
-+		}
-+		if (info->cstate != PPTP_CALL_OUT_REQ &&
-+		    info->cstate != PPTP_CALL_OUT_CONF) {
-+			DEBUGP("%s without OUTCALL_REQ\n", strMName[msg]);
-+			break;
-+		}
-+		if (pptpReq.ocack->resultCode != PPTP_OUTCALL_CONNECT) {
-+			info->cstate = PPTP_CALL_NONE;
-+			break;
-+		}
-+
-+		cid = &pptpReq.ocack->callID;
-+		pcid = &pptpReq.ocack->peersCallID;
-+
-+		info->pac_call_id = ntohs(*cid);
-+		
-+		if (htons(info->pns_call_id) != *pcid) {
-+			DEBUGP("%s for unknown callid %u\n",
-+				strMName[msg], ntohs(*pcid));
-+			break;
-+		}
-+
-+		DEBUGP("%s, CID=%X, PCID=%X\n", strMName[msg], 
-+			ntohs(*cid), ntohs(*pcid));
-+		
-+		info->cstate = PPTP_CALL_OUT_CONF;
-+
-+		seq = ntohl(tcph->seq) + ((void *)pcid - (void *)pptph);
-+		if (exp_gre(ct, seq, *cid, *pcid) != 0)
-+			printk("ip_conntrack_pptp: error during exp_gre\n");
-+		break;
-+
-+	case PPTP_IN_CALL_REQUEST:
-+		/* server tells us about incoming call request */
-+		if (info->sstate != PPTP_SESSION_CONFIRMED) {
-+			DEBUGP("%s but no session\n", strMName[msg]);
-+			break;
-+		}
-+		pcid = &pptpReq.icack->peersCallID;
-+		DEBUGP("%s, PCID=%X\n", strMName[msg], ntohs(*pcid));
-+		info->cstate = PPTP_CALL_IN_REQ;
-+		info->pac_call_id= ntohs(*pcid);
-+		break;
-+
-+	case PPTP_IN_CALL_CONNECT:
-+		/* server tells us about incoming call established */
-+		if (info->sstate != PPTP_SESSION_CONFIRMED) {
-+			DEBUGP("%s but no session\n", strMName[msg]);
-+			break;
-+		}
-+		if (info->sstate != PPTP_CALL_IN_REP
-+		    && info->sstate != PPTP_CALL_IN_CONF) {
-+			DEBUGP("%s but never sent IN_CALL_REPLY\n",
-+				strMName[msg]);
-+			break;
-+		}
-+
-+		pcid = &pptpReq.iccon->peersCallID;
-+		cid = &info->pac_call_id;
-+
-+		if (info->pns_call_id != ntohs(*pcid)) {
-+			DEBUGP("%s for unknown CallID %u\n", 
-+				strMName[msg], ntohs(*cid));
-+			break;
-+		}
-+
-+		DEBUGP("%s, PCID=%X\n", strMName[msg], ntohs(*pcid));
-+		info->cstate = PPTP_CALL_IN_CONF;
-+
-+		/* we expect a GRE connection from PAC to PNS */
-+		seq = ntohl(tcph->seq) + ((void *)pcid - (void *)pptph);
-+		if (exp_gre(ct, seq, *cid, *pcid) != 0)
-+			printk("ip_conntrack_pptp: error during exp_gre\n");
-+
-+		break;
-+
-+	case PPTP_CALL_DISCONNECT_NOTIFY:
-+		/* server confirms disconnect */
-+		cid = &pptpReq.disc->callID;
-+		DEBUGP("%s, CID=%X\n", strMName[msg], ntohs(*cid));
-+		info->cstate = PPTP_CALL_NONE;
-+
-+		/* untrack this call id, unexpect GRE packets */
-+		pptp_timeout_related(ct);
-+		break;
-+
-+	case PPTP_WAN_ERROR_NOTIFY:
-+		break;
-+
-+	case PPTP_ECHO_REQUEST:
-+	case PPTP_ECHO_REPLY:
-+		/* I don't have to explain these ;) */
-+		break;
-+	default:
-+		DEBUGP("invalid %s (TY=%d)\n", (msg <= PPTP_MSG_MAX)
-+			? strMName[msg]:strMName[0], msg);
-+		break;
-+	}
-+
-+	return NF_ACCEPT;
-+
-+}
-+
-+static inline int
-+pptp_outbound_pkt(struct tcphdr *tcph,
-+		  struct pptp_pkt_hdr *pptph,
-+		  size_t datalen,
-+		  struct ip_conntrack *ct,
-+		  enum ip_conntrack_info ctinfo)
-+{
-+	struct PptpControlHeader *ctlh;
-+        union pptp_ctrl_union pptpReq;
-+	struct ip_ct_pptp_master *info = &ct->help.ct_pptp_info;
-+	u_int16_t msg, *cid, *pcid;
-+
-+	ctlh = (struct PptpControlHeader *) ((void *) pptph + sizeof(*pptph));
-+	pptpReq.rawreq = (void *) ((void *) ctlh + sizeof(*ctlh));
-+
-+	msg = ntohs(ctlh->messageType);
-+	DEBUGP("outbound control message %s\n", strMName[msg]);
-+
-+	switch (msg) {
-+	case PPTP_START_SESSION_REQUEST:
-+		/* client requests for new control session */
-+		if (info->sstate != PPTP_SESSION_NONE) {
-+			DEBUGP("%s but we already have one",
-+				strMName[msg]);
-+		}
-+		info->sstate = PPTP_SESSION_REQUESTED;
-+		break;
-+	case PPTP_STOP_SESSION_REQUEST:
-+		/* client requests end of control session */
-+		info->sstate = PPTP_SESSION_STOPREQ;
-+		break;
-+
-+	case PPTP_OUT_CALL_REQUEST:
-+		/* client initiating connection to server */
-+		if (info->sstate != PPTP_SESSION_CONFIRMED) {
-+			DEBUGP("%s but no session\n",
-+				strMName[msg]);
-+			break;
-+		}
-+		info->cstate = PPTP_CALL_OUT_REQ;
-+		/* track PNS call id */
-+		cid = &pptpReq.ocreq->callID;
-+		DEBUGP("%s, CID=%X\n", strMName[msg], ntohs(*cid));
-+		info->pns_call_id = ntohs(*cid);
-+		break;
-+	case PPTP_IN_CALL_REPLY:
-+		/* client answers incoming call */
-+		if (info->cstate != PPTP_CALL_IN_REQ
-+		    && info->cstate != PPTP_CALL_IN_REP) {
-+			DEBUGP("%s without incall_req\n", 
-+				strMName[msg]);
-+			break;
-+		}
-+		if (pptpReq.icack->resultCode != PPTP_INCALL_ACCEPT) {
-+			info->cstate = PPTP_CALL_NONE;
-+			break;
-+		}
-+		pcid = &pptpReq.icack->peersCallID;
-+		if (info->pac_call_id != ntohs(*pcid)) {
-+			DEBUGP("%s for unknown call %u\n", 
-+				strMName[msg], ntohs(*pcid));
-+			break;
-+		}
-+		DEBUGP("%s, CID=%X\n", strMName[msg], ntohs(*pcid));
-+		/* part two of the three-way handshake */
-+		info->cstate = PPTP_CALL_IN_REP;
-+		info->pns_call_id = ntohs(pptpReq.icack->callID);
-+		break;
-+
-+	case PPTP_CALL_CLEAR_REQUEST:
-+		/* client requests hangup of call */
-+		if (info->sstate != PPTP_SESSION_CONFIRMED) {
-+			DEBUGP("CLEAR_CALL but no session\n");
-+			break;
-+		}
-+		/* FUTURE: iterate over all calls and check if
-+		 * call ID is valid.  We don't do this without newnat,
-+		 * because we only know about last call */
-+		info->cstate = PPTP_CALL_CLEAR_REQ;
-+		break;
-+	case PPTP_SET_LINK_INFO:
-+		break;
-+	case PPTP_ECHO_REQUEST:
-+	case PPTP_ECHO_REPLY:
-+		/* I don't have to explain these ;) */
-+		break;
-+	default:
-+		DEBUGP("invalid %s (TY=%d)\n", (msg <= PPTP_MSG_MAX)? 
-+			strMName[msg]:strMName[0], msg);
-+		/* unknown: no need to create GRE masq table entry */
-+		break;
-+	}
-+
-+	return NF_ACCEPT;
-+}
-+
-+
-+/* track caller id inside control connection, call expect_related */
-+static int 
-+conntrack_pptp_help(const struct iphdr *iph, size_t len,
-+		    struct ip_conntrack *ct, enum ip_conntrack_info ctinfo)
-+
-+{
-+	struct pptp_pkt_hdr *pptph;
-+	
-+	struct tcphdr *tcph = (void *) iph + iph->ihl * 4;
-+	u_int32_t tcplen = len - iph->ihl * 4;
-+	u_int32_t datalen = tcplen - tcph->doff * 4;
-+	void *datalimit;
-+	int dir = CTINFO2DIR(ctinfo);
-+	struct ip_ct_pptp_master *info = &ct->help.ct_pptp_info;
-+
-+	int oldsstate, oldcstate;
-+	int ret;
-+
-+	/* don't do any tracking before tcp handshake complete */
-+	if (ctinfo != IP_CT_ESTABLISHED 
-+	    && ctinfo != IP_CT_ESTABLISHED+IP_CT_IS_REPLY) {
-+		DEBUGP("ctinfo = %u, skipping\n", ctinfo);
-+		return NF_ACCEPT;
-+	}
-+	
-+	/* not a complete TCP header? */
-+	if (tcplen < sizeof(struct tcphdr) || tcplen < tcph->doff * 4) {
-+		DEBUGP("tcplen = %u\n", tcplen);
-+		return NF_ACCEPT;
-+	}
-+
-+	/* checksum invalid? */
-+	if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
-+			csum_partial((char *) tcph, tcplen, 0))) {
-+		printk(KERN_NOTICE __FILE__ ": bad csum\n");
-+		/* W2K PPTP server sends TCP packets with wrong checksum :(( */
-+		//return NF_ACCEPT;
-+	}
-+
-+	if (tcph->fin || tcph->rst) {
-+		DEBUGP("RST/FIN received, timeouting GRE\n");
-+		/* can't do this after real newnat */
-+		info->cstate = PPTP_CALL_NONE;
-+
-+		/* untrack this call id, unexpect GRE packets */
-+		pptp_timeout_related(ct);
-+	}
-+
-+
-+	pptph = (struct pptp_pkt_hdr *) ((void *) tcph + tcph->doff * 4);
-+	datalimit = (void *) pptph + datalen;
-+
-+	/* not a full pptp packet header? */
-+	if ((void *) pptph+sizeof(*pptph) >= datalimit) {
-+		DEBUGP("no full PPTP header, can't track\n");
-+		return NF_ACCEPT;
-+	}
-+	
-+	/* if it's not a control message we can't do anything with it */
-+        if (ntohs(pptph->packetType) != PPTP_PACKET_CONTROL ||
-+	    ntohl(pptph->magicCookie) != PPTP_MAGIC_COOKIE) {
-+		DEBUGP("not a control packet\n");
-+		return NF_ACCEPT;
-+	}
-+
-+	oldsstate = info->sstate;
-+	oldcstate = info->cstate;
-+
-+	LOCK_BH(&ip_pptp_lock);
-+
-+	/* FIXME: We just blindly assume that the control connection is always
-+	 * established from PNS->PAC.  However, RFC makes no guarantee */
-+	if (dir == IP_CT_DIR_ORIGINAL)
-+		/* client -> server (PNS -> PAC) */
-+		ret = pptp_outbound_pkt(tcph, pptph, datalen, ct, ctinfo);
-+	else
-+		/* server -> client (PAC -> PNS) */
-+		ret = pptp_inbound_pkt(tcph, pptph, datalen, ct, ctinfo);
-+	DEBUGP("sstate: %d->%d, cstate: %d->%d\n",
-+		oldsstate, info->sstate, oldcstate, info->cstate);
-+	UNLOCK_BH(&ip_pptp_lock);
-+
-+	return ret;
-+}
-+
-+/* control protocol helper */
-+static struct ip_conntrack_helper pptp = { 
-+	.list = { NULL, NULL },
-+	.name = "pptp", 
-+	.flags = IP_CT_HELPER_F_REUSE_EXPECT,
-+	.me = THIS_MODULE,
-+	.max_expected = 2,
-+	.timeout = 0,
-+	.tuple = { .src = { .ip = 0, 
-+		 	    .u = { .tcp = { .port =  
-+				    __constant_htons(PPTP_CONTROL_PORT) } } 
-+			  }, 
-+		   .dst = { .ip = 0, 
-+			    .u = { .all = 0 },
-+			    .protonum = IPPROTO_TCP
-+			  } 
-+		 },
-+	.mask = { .src = { .ip = 0, 
-+			   .u = { .tcp = { .port = 0xffff } } 
-+			 }, 
-+		  .dst = { .ip = 0, 
-+			   .u = { .all = 0 },
-+			   .protonum = 0xffff 
-+		 	 } 
-+		},
-+	.help = conntrack_pptp_help
-+};
-+
-+/* ip_conntrack_pptp initialization */
-+static int __init init(void)
-+{
-+	int retcode;
-+
-+	DEBUGP(__FILE__ ": registering helper\n");
-+	if ((retcode = ip_conntrack_helper_register(&pptp))) {
-+                printk(KERN_ERR "Unable to register conntrack application "
-+				"helper for pptp: %d\n", retcode);
-+		return -EIO;
-+	}
-+
-+	printk("ip_conntrack_pptp version %s loaded\n", IP_CT_PPTP_VERSION);
-+	return 0;
-+}
-+
-+static void __exit fini(void)
-+{
-+	ip_conntrack_helper_unregister(&pptp);
-+	printk("ip_conntrack_pptp version %s unloaded\n", IP_CT_PPTP_VERSION);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
-+EXPORT_SYMBOL(ip_pptp_lock);
diff --git a/openwrt/target/linux/generic-2.4/patches/604-netfilter_maxconn.patch b/openwrt/target/linux/generic-2.4/patches/604-netfilter_maxconn.patch
deleted file mode 100644
index 001ed67b88..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/604-netfilter_maxconn.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- ../../buildroot-unpacked/build_mipsel/linux/net/ipv4/netfilter/ip_conntrack_core.c	2004-11-28 22:59:36.000000000 -0500
-+++ linux/net/ipv4/netfilter/ip_conntrack_core.c	2004-11-30 05:05:32.000000000 -0500
-@@ -1386,7 +1386,7 @@
- 	nf_unregister_sockopt(&so_getorigdst);
- }
- 
--static int hashsize = 0;
-+static int hashsize = 5953;
- MODULE_PARM(hashsize, "i");
- 
- int __init ip_conntrack_init(void)
-@@ -1407,7 +1407,7 @@
- 		if (ip_conntrack_htable_size < 16)
- 			ip_conntrack_htable_size = 16;
- 	}
--	ip_conntrack_max = 8 * ip_conntrack_htable_size;
-+	ip_conntrack_max = ip_conntrack_htable_size;
- 
- 	printk("ip_conntrack version %s (%u buckets, %d max)"
- 	       " - %Zd bytes per conntrack\n", IP_CONNTRACK_VERSION,
diff --git a/openwrt/target/linux/generic-2.4/patches/605-netfilter_TTL.patch b/openwrt/target/linux/generic-2.4/patches/605-netfilter_TTL.patch
deleted file mode 100644
index 0aa3c80432..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/605-netfilter_TTL.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-diff -urN linux-2.4.30.old/Documentation/Configure.help linux-2.4.30.dev/Documentation/Configure.help
---- linux-2.4.30.old/Documentation/Configure.help	2005-04-27 11:35:46.000000000 +0200
-+++ linux-2.4.30.dev/Documentation/Configure.help	2005-04-27 11:43:49.000000000 +0200
-@@ -3209,6 +3209,15 @@
-   If you want to compile it as a module, say M here and read
-   <file:Documentation/modules.txt>.  If unsure, say `N'.
- 
-+TTL target support
-+CONFIG_IP_NF_TARGET_TTL
-+  This option adds a `TTL' target, which enables the user to set
-+  the TTL value or increment / decrement the TTL value by a given
-+  amount.
-+
-+  If you want to compile it as a module, say M here and read
-+  Documentation/modules.txt.  If unsure, say `N'.
-+
- ipchains (2.2-style) support
- CONFIG_IP_NF_COMPAT_IPCHAINS
-   This option places ipchains (with masquerading and redirection
-diff -urN linux-2.4.30.old/include/linux/netfilter_ipv4/ipt_TTL.h linux-2.4.30.dev/include/linux/netfilter_ipv4/ipt_TTL.h
---- linux-2.4.30.old/include/linux/netfilter_ipv4/ipt_TTL.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/include/linux/netfilter_ipv4/ipt_TTL.h	2005-04-27 11:43:49.000000000 +0200
-@@ -0,0 +1,21 @@
-+/* TTL modification module for IP tables
-+ * (C) 2000 by Harald Welte <laforge@gnumonks.org> */
-+
-+#ifndef _IPT_TTL_H
-+#define _IPT_TTL_H
-+
-+enum {
-+	IPT_TTL_SET = 0,
-+	IPT_TTL_INC,
-+	IPT_TTL_DEC
-+};
-+
-+#define IPT_TTL_MAXMODE	IPT_TTL_DEC
-+
-+struct ipt_TTL_info {
-+	u_int8_t	mode;
-+	u_int8_t	ttl;
-+};
-+
-+
-+#endif
-diff -urN linux-2.4.30.old/net/ipv4/netfilter/Config.in linux-2.4.30.dev/net/ipv4/netfilter/Config.in
---- linux-2.4.30.old/net/ipv4/netfilter/Config.in	2005-04-27 11:35:45.000000000 +0200
-+++ linux-2.4.30.dev/net/ipv4/netfilter/Config.in	2005-04-27 11:43:49.000000000 +0200
-@@ -129,6 +129,7 @@
-     dep_tristate '    MARK target support' CONFIG_IP_NF_TARGET_MARK $CONFIG_IP_NF_MANGLE
-   fi
-   dep_tristate '  LOG target support' CONFIG_IP_NF_TARGET_LOG $CONFIG_IP_NF_IPTABLES
-+  dep_tristate '  TTL target support' CONFIG_IP_NF_TARGET_TTL $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  ULOG target support' CONFIG_IP_NF_TARGET_ULOG $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  TCPMSS target support' CONFIG_IP_NF_TARGET_TCPMSS $CONFIG_IP_NF_IPTABLES
- fi
-diff -urN linux-2.4.30.old/net/ipv4/netfilter/ipt_TTL.c linux-2.4.30.dev/net/ipv4/netfilter/ipt_TTL.c
---- linux-2.4.30.old/net/ipv4/netfilter/ipt_TTL.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/net/ipv4/netfilter/ipt_TTL.c	2005-04-27 11:43:49.000000000 +0200
-@@ -0,0 +1,110 @@
-+/* TTL modification target for IP tables
-+ * (C) 2000 by Harald Welte <laforge@gnumonks.org>
-+ *
-+ * Version: $Revision: 1.1 $
-+ *
-+ * This software is distributed under the terms of GNU GPL
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/ip.h>
-+#include <net/checksum.h>
-+
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ipt_TTL.h>
-+
-+MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
-+MODULE_DESCRIPTION("IP tables TTL modification module");
-+MODULE_LICENSE("GPL");
-+
-+static unsigned int ipt_ttl_target(struct sk_buff **pskb, unsigned int hooknum,
-+		const struct net_device *in, const struct net_device *out,
-+		const void *targinfo, void *userinfo)
-+{
-+	struct iphdr *iph = (*pskb)->nh.iph;
-+	const struct ipt_TTL_info *info = targinfo;
-+	u_int16_t diffs[2];
-+	int new_ttl;
-+			 
-+	switch (info->mode) {
-+		case IPT_TTL_SET:
-+			new_ttl = info->ttl;
-+			break;
-+		case IPT_TTL_INC:
-+			new_ttl = iph->ttl + info->ttl;
-+			if (new_ttl > 255)
-+				new_ttl = 255;
-+			break;
-+		case IPT_TTL_DEC:
-+			new_ttl = iph->ttl - info->ttl;
-+			if (new_ttl < 0)
-+				new_ttl = 0;
-+			break;
-+		default:
-+			new_ttl = iph->ttl;
-+			break;
-+	}
-+
-+	if (new_ttl != iph->ttl) {
-+		diffs[0] = htons(((unsigned)iph->ttl) << 8) ^ 0xFFFF;
-+		iph->ttl = new_ttl;
-+		diffs[1] = htons(((unsigned)iph->ttl) << 8);
-+		iph->check = csum_fold(csum_partial((char *)diffs,
-+						    sizeof(diffs),
-+				 	            iph->check^0xFFFF));
-+									                	(*pskb)->nfcache |= NFC_ALTERED;
-+	}
-+
-+	return IPT_CONTINUE;
-+}
-+
-+static int ipt_ttl_checkentry(const char *tablename,
-+		const struct ipt_entry *e,
-+		void *targinfo,
-+		unsigned int targinfosize,
-+		unsigned int hook_mask)
-+{
-+	struct ipt_TTL_info *info = targinfo;
-+
-+	if (targinfosize != IPT_ALIGN(sizeof(struct ipt_TTL_info))) {
-+		printk(KERN_WARNING "TTL: targinfosize %u != %Zu\n",
-+				targinfosize,
-+				IPT_ALIGN(sizeof(struct ipt_TTL_info)));
-+		return 0;	
-+	}	
-+
-+	if (strcmp(tablename, "mangle")) {
-+		printk(KERN_WARNING "TTL: can only be called from \"mangle\" table, not \"%s\"\n", tablename);
-+		return 0;
-+	}
-+
-+	if (info->mode > IPT_TTL_MAXMODE) {
-+		printk(KERN_WARNING "TTL: invalid or unknown Mode %u\n", 
-+			info->mode);
-+		return 0;
-+	}
-+
-+	if ((info->mode != IPT_TTL_SET) && (info->ttl == 0)) {
-+		printk(KERN_WARNING "TTL: increment/decrement doesn't make sense with value 0\n");
-+		return 0;
-+	}
-+	
-+	return 1;
-+}
-+
-+static struct ipt_target ipt_TTL = { { NULL, NULL }, "TTL", 
-+	ipt_ttl_target, ipt_ttl_checkentry, NULL, THIS_MODULE };
-+
-+static int __init init(void)
-+{
-+	return ipt_register_target(&ipt_TTL);
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_target(&ipt_TTL);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux-2.4.30.old/net/ipv4/netfilter/Makefile linux-2.4.30.dev/net/ipv4/netfilter/Makefile
---- linux-2.4.30.old/net/ipv4/netfilter/Makefile	2005-04-27 11:35:45.000000000 +0200
-+++ linux-2.4.30.dev/net/ipv4/netfilter/Makefile	2005-04-27 11:43:49.000000000 +0200
-@@ -112,6 +112,7 @@
- obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
- obj-$(CONFIG_IP_NF_NAT_SNMP_BASIC) += ip_nat_snmp_basic.o
- obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
-+obj-$(CONFIG_IP_NF_TARGET_TTL) += ipt_TTL.o
- obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o
- obj-$(CONFIG_IP_NF_TARGET_TCPMSS) += ipt_TCPMSS.o
- 
diff --git a/openwrt/target/linux/generic-2.4/patches/606-netfilter_NETMAP.patch b/openwrt/target/linux/generic-2.4/patches/606-netfilter_NETMAP.patch
deleted file mode 100644
index ccd639181e..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/606-netfilter_NETMAP.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-diff -urN linux-2.4.30.orig/Documentation/Configure.help linux-2.4.30/Documentation/Configure.help
---- linux-2.4.30.orig/Documentation/Configure.help	2005-07-01 02:06:36.000000000 +0200
-+++ linux-2.4.30/Documentation/Configure.help	2005-07-01 00:41:09.000000000 +0200
-@@ -3086,6 +3086,17 @@
-   If you want to compile it as a module, say M here and read
-   <file:Documentation/modules.txt>.  If unsure, say `N'.
- 
-+NETMAP target support
-+CONFIG_IP_NF_TARGET_NETMAP
-+  NETMAP is an implementation of static 1:1 NAT mapping of network
-+  addresses. It maps the network address part, while keeping the
-+  host address part intact. It is similar to Fast NAT, except that
-+  Netfilter's connection tracking doesn't work well with Fast NAT.
-+
-+  If you want to compile it as a module, say M here and read
-+  Documentation/modules.txt.  The module will be called
-+  ipt_NETMAP.o.  If unsure, say `N'.
-+
- Packet mangling
- CONFIG_IP_NF_MANGLE
-   This option adds a `mangle' table to iptables: see the man page for
-diff -urN linux-2.4.30.orig/net/ipv4/netfilter/Config.in linux-2.4.30/net/ipv4/netfilter/Config.in
---- linux-2.4.30.orig/net/ipv4/netfilter/Config.in	2005-07-01 02:06:35.000000000 +0200
-+++ linux-2.4.30/net/ipv4/netfilter/Config.in	2005-07-01 00:41:09.000000000 +0200
-@@ -69,6 +69,7 @@
-       define_bool CONFIG_IP_NF_NAT_NEEDED y
-       dep_tristate '    MASQUERADE target support' CONFIG_IP_NF_TARGET_MASQUERADE $CONFIG_IP_NF_NAT
-       dep_tristate '    REDIRECT target support' CONFIG_IP_NF_TARGET_REDIRECT $CONFIG_IP_NF_NAT
-+      dep_tristate '    NETMAP target support' CONFIG_IP_NF_TARGET_NETMAP $CONFIG_IP_NF_NAT
-       if [ "$CONFIG_IP_NF_PPTP" = "m" ]; then
-         define_tristate CONFIG_IP_NF_NAT_PPTP m
-       else
-diff -urN linux-2.4.30.orig/net/ipv4/netfilter/ipt_NETMAP.c linux-2.4.30/net/ipv4/netfilter/ipt_NETMAP.c
---- linux-2.4.30.orig/net/ipv4/netfilter/ipt_NETMAP.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30/net/ipv4/netfilter/ipt_NETMAP.c	2005-07-01 00:41:09.000000000 +0200
-@@ -0,0 +1,112 @@
-+/* NETMAP - static NAT mapping of IP network addresses (1:1).
-+   The mapping can be applied to source (POSTROUTING),
-+   destination (PREROUTING), or both (with separate rules).
-+
-+   Author: Svenning Soerensen <svenning@post5.tele.dk>
-+*/
-+
-+#include <linux/config.h>
-+#include <linux/ip.h>
-+#include <linux/module.h>
-+#include <linux/netdevice.h>
-+#include <linux/netfilter.h>
-+#include <linux/netfilter_ipv4.h>
-+#include <linux/netfilter_ipv4/ip_nat_rule.h>
-+
-+#define MODULENAME "NETMAP"
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Svenning Soerensen <svenning@post5.tele.dk>");
-+MODULE_DESCRIPTION("iptables 1:1 NAT mapping of IP networks target");
-+
-+#if 0
-+#define DEBUGP printk
-+#else
-+#define DEBUGP(format, args...)
-+#endif
-+
-+static int
-+check(const char *tablename,
-+      const struct ipt_entry *e,
-+      void *targinfo,
-+      unsigned int targinfosize,
-+      unsigned int hook_mask)
-+{
-+	const struct ip_nat_multi_range *mr = targinfo;
-+
-+	if (strcmp(tablename, "nat") != 0) {
-+		DEBUGP(MODULENAME":check: bad table `%s'.\n", tablename);
-+		return 0;
-+	}
-+	if (targinfosize != IPT_ALIGN(sizeof(*mr))) {
-+		DEBUGP(MODULENAME":check: size %u.\n", targinfosize);
-+		return 0;
-+	}
-+	if (hook_mask & ~((1 << NF_IP_PRE_ROUTING) | (1 << NF_IP_POST_ROUTING))) {
-+		DEBUGP(MODULENAME":check: bad hooks %x.\n", hook_mask);
-+		return 0;
-+	}
-+	if (!(mr->range[0].flags & IP_NAT_RANGE_MAP_IPS)) {
-+		DEBUGP(MODULENAME":check: bad MAP_IPS.\n");
-+		return 0;
-+	}
-+	if (mr->rangesize != 1) {
-+		DEBUGP(MODULENAME":check: bad rangesize %u.\n", mr->rangesize);
-+		return 0;
-+	}
-+	return 1;
-+}
-+
-+static unsigned int
-+target(struct sk_buff **pskb,
-+       unsigned int hooknum,
-+       const struct net_device *in,
-+       const struct net_device *out,
-+       const void *targinfo,
-+       void *userinfo)
-+{
-+	struct ip_conntrack *ct;
-+	enum ip_conntrack_info ctinfo;
-+	u_int32_t new_ip, netmask;
-+	const struct ip_nat_multi_range *mr = targinfo;
-+	struct ip_nat_multi_range newrange;
-+
-+	IP_NF_ASSERT(hooknum == NF_IP_PRE_ROUTING
-+		     || hooknum == NF_IP_POST_ROUTING);
-+	ct = ip_conntrack_get(*pskb, &ctinfo);
-+
-+	netmask = ~(mr->range[0].min_ip ^ mr->range[0].max_ip);
-+
-+	if (hooknum == NF_IP_PRE_ROUTING)
-+		new_ip = (*pskb)->nh.iph->daddr & ~netmask;
-+	else
-+		new_ip = (*pskb)->nh.iph->saddr & ~netmask;
-+	new_ip |= mr->range[0].min_ip & netmask;
-+
-+	newrange = ((struct ip_nat_multi_range)
-+	{ 1, { { mr->range[0].flags | IP_NAT_RANGE_MAP_IPS,
-+		 new_ip, new_ip,
-+		 mr->range[0].min, mr->range[0].max } } });
-+
-+	/* Hand modified range to generic setup. */
-+	return ip_nat_setup_info(ct, &newrange, hooknum);
-+}
-+
-+static struct ipt_target target_module = { 
-+	.name = MODULENAME,
-+	.target = target,
-+	.checkentry = check,
-+	.me = THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+	return ipt_register_target(&target_module);
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_target(&target_module);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux-2.4.30.orig/net/ipv4/netfilter/Makefile linux-2.4.30/net/ipv4/netfilter/Makefile
---- linux-2.4.30.orig/net/ipv4/netfilter/Makefile	2005-07-01 02:06:35.000000000 +0200
-+++ linux-2.4.30/net/ipv4/netfilter/Makefile	2005-07-01 00:41:09.000000000 +0200
-@@ -110,6 +110,7 @@
- obj-$(CONFIG_IP_NF_TARGET_MARK) += ipt_MARK.o
- obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
- obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
-+obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
- obj-$(CONFIG_IP_NF_NAT_SNMP_BASIC) += ip_nat_snmp_basic.o
- obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
- obj-$(CONFIG_IP_NF_TARGET_TTL) += ipt_TTL.o
diff --git a/openwrt/target/linux/generic-2.4/patches/607-netfilter_connmark.patch b/openwrt/target/linux/generic-2.4/patches/607-netfilter_connmark.patch
deleted file mode 100644
index 154314dc41..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/607-netfilter_connmark.patch
+++ /dev/null
@@ -1,351 +0,0 @@
-diff -urN linux.old/include/linux/netfilter_ipv4/ip_conntrack.h linux.dev/include/linux/netfilter_ipv4/ip_conntrack.h
---- linux.old/include/linux/netfilter_ipv4/ip_conntrack.h	2005-08-20 20:02:06.619827000 +0200
-+++ linux.dev/include/linux/netfilter_ipv4/ip_conntrack.h	2005-08-20 20:19:23.302029232 +0200
-@@ -226,6 +226,9 @@
- 		unsigned int app_data_len;
- 	} layer7;
- #endif
-+#if defined(CONFIG_IP_NF_CONNTRACK_MARK)
-+	unsigned long mark;
-+#endif
- };
- 
- /* get master conntrack via master expectation */
-diff -urN linux.old/include/linux/netfilter_ipv4/ipt_CONNMARK.h linux.dev/include/linux/netfilter_ipv4/ipt_CONNMARK.h
---- linux.old/include/linux/netfilter_ipv4/ipt_CONNMARK.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/linux/netfilter_ipv4/ipt_CONNMARK.h	2005-08-20 20:19:41.058329864 +0200
-@@ -0,0 +1,25 @@
-+#ifndef _IPT_CONNMARK_H_target
-+#define _IPT_CONNMARK_H_target
-+
-+/* Copyright (C) 2002,2004 MARA Systems AB <http://www.marasystems.com>
-+ * by Henrik Nordstrom <hno@marasystems.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+enum {
-+	IPT_CONNMARK_SET = 0,
-+	IPT_CONNMARK_SAVE,
-+	IPT_CONNMARK_RESTORE
-+};
-+
-+struct ipt_connmark_target_info {
-+	unsigned long mark;
-+	unsigned long mask;
-+	u_int8_t mode;
-+};
-+
-+#endif /*_IPT_CONNMARK_H_target*/
-diff -urN linux.old/include/linux/netfilter_ipv4/ipt_connmark.h linux.dev/include/linux/netfilter_ipv4/ipt_connmark.h
---- linux.old/include/linux/netfilter_ipv4/ipt_connmark.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/linux/netfilter_ipv4/ipt_connmark.h	2005-08-20 20:19:41.058329864 +0200
-@@ -0,0 +1,18 @@
-+#ifndef _IPT_CONNMARK_H
-+#define _IPT_CONNMARK_H
-+
-+/* Copyright (C) 2002,2004 MARA Systems AB <http://www.marasystems.com>
-+ * by Henrik Nordstrom <hno@marasystems.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+struct ipt_connmark_info {
-+	unsigned long mark, mask;
-+	u_int8_t invert;
-+};
-+
-+#endif /*_IPT_CONNMARK_H*/
-diff -urN linux.old/net/ipv4/netfilter/Config.in linux.dev/net/ipv4/netfilter/Config.in
---- linux.old/net/ipv4/netfilter/Config.in	2005-08-20 20:02:09.325416000 +0200
-+++ linux.dev/net/ipv4/netfilter/Config.in	2005-08-20 20:29:11.546602464 +0200
-@@ -6,7 +6,8 @@
- 
- tristate 'Connection tracking (required for masq/NAT)' CONFIG_IP_NF_CONNTRACK
- if [ "$CONFIG_IP_NF_CONNTRACK" != "n" ]; then
--  dep_tristate '  FTP protocol support' CONFIG_IP_NF_FTP $CONFIG_IP_NF_CONNTRACK
-+  bool '  Connection mark tracking support' CONFIG_IP_NF_CONNTRACK_MARK
-+  dep_tristate '  FTP protocol support' CONFIG_IP_NF_FTP $CONFIG_IP_NF_CONNTRACKa
-   dep_tristate '  Amanda protocol support' CONFIG_IP_NF_AMANDA $CONFIG_IP_NF_CONNTRACK
-   dep_tristate '  TFTP protocol support' CONFIG_IP_NF_TFTP $CONFIG_IP_NF_CONNTRACK
-   dep_tristate '  IRC protocol support' CONFIG_IP_NF_IRC $CONFIG_IP_NF_CONNTRACK
-@@ -42,6 +43,9 @@
-   if [ "$CONFIG_IP_NF_CONNTRACK" != "n" ]; then
-     dep_tristate '  Connection state match support' CONFIG_IP_NF_MATCH_STATE $CONFIG_IP_NF_CONNTRACK $CONFIG_IP_NF_IPTABLES 
-     dep_tristate '  Connection tracking match support' CONFIG_IP_NF_MATCH_CONNTRACK $CONFIG_IP_NF_CONNTRACK $CONFIG_IP_NF_IPTABLES 
-+	if [ "$CONFIG_IP_NF_CONNTRACK_MARK" != "n" ]; then
-+	  dep_tristate '  Connection mark match support' CONFIG_IP_NF_MATCH_CONNMARK $CONFIG_IP_NF_IPTABLES
-+	fi
-   fi
-   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-     dep_tristate '  Unclean match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_UNCLEAN $CONFIG_IP_NF_IPTABLES
-@@ -125,6 +129,9 @@
-  
-     dep_tristate '    MARK target support' CONFIG_IP_NF_TARGET_MARK $CONFIG_IP_NF_MANGLE
-   fi
-+  if [ "$CONFIG_IP_NF_CONNTRACK_MARK" != "n" ]; then
-+    dep_tristate '  CONNMARK target support' CONFIG_IP_NF_TARGET_CONNMARK $CONFIG_IP_NF_IPTABLES
-+  fi
-   dep_tristate '  LOG target support' CONFIG_IP_NF_TARGET_LOG $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  TTL target support' CONFIG_IP_NF_TARGET_TTL $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  ULOG target support' CONFIG_IP_NF_TARGET_ULOG $CONFIG_IP_NF_IPTABLES
-diff -urN linux.old/net/ipv4/netfilter/Makefile linux.dev/net/ipv4/netfilter/Makefile
---- linux.old/net/ipv4/netfilter/Makefile	2005-08-20 20:02:09.326416000 +0200
-+++ linux.dev/net/ipv4/netfilter/Makefile	2005-08-20 20:29:54.081136232 +0200
-@@ -93,6 +93,7 @@
- 
- obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o
- obj-$(CONFIG_IP_NF_MATCH_STATE) += ipt_state.o
-+obj-$(CONFIG_IP_NF_MATCH_CONNMARK) += ipt_connmark.o
- obj-$(CONFIG_IP_NF_MATCH_CONNTRACK) += ipt_conntrack.o
- obj-$(CONFIG_IP_NF_MATCH_UNCLEAN) += ipt_unclean.o
- obj-$(CONFIG_IP_NF_MATCH_TCPMSS) += ipt_tcpmss.o
-@@ -110,6 +111,7 @@
- obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
- obj-$(CONFIG_IP_NF_NAT_SNMP_BASIC) += ip_nat_snmp_basic.o
- obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
-+obj-$(CONFIG_IP_NF_TARGET_CONNMARK) += ipt_CONNMARK.o
- obj-$(CONFIG_IP_NF_TARGET_TTL) += ipt_TTL.o
- obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o
- obj-$(CONFIG_IP_NF_TARGET_TCPMSS) += ipt_TCPMSS.o
-diff -urN linux.old/net/ipv4/netfilter/ip_conntrack_core.c linux.dev/net/ipv4/netfilter/ip_conntrack_core.c
---- linux.old/net/ipv4/netfilter/ip_conntrack_core.c	2005-08-20 20:02:06.828795000 +0200
-+++ linux.dev/net/ipv4/netfilter/ip_conntrack_core.c	2005-08-20 20:33:23.308328864 +0200
-@@ -755,6 +755,9 @@
- 		__set_bit(IPS_EXPECTED_BIT, &conntrack->status);
- 		conntrack->master = expected;
- 		expected->sibling = conntrack;
-+#ifdef CONFIG_IP_NF_CONNTRACK_MARK
-+		conntrack->mark = expected->expectant->mark;
-+#endif
- 		LIST_DELETE(&ip_conntrack_expect_list, expected);
- 		expected->expectant->expecting--;
- 		nf_conntrack_get(&master_ct(conntrack)->infos[0]);
-diff -urN linux.old/net/ipv4/netfilter/ip_conntrack_standalone.c linux.dev/net/ipv4/netfilter/ip_conntrack_standalone.c
---- linux.old/net/ipv4/netfilter/ip_conntrack_standalone.c	2005-08-20 20:02:06.583833000 +0200
-+++ linux.dev/net/ipv4/netfilter/ip_conntrack_standalone.c	2005-08-20 20:32:15.364657872 +0200
-@@ -107,6 +107,9 @@
- 		len += sprintf(buffer + len, "[ASSURED] ");
- 	len += sprintf(buffer + len, "use=%u ",
- 		       atomic_read(&conntrack->ct_general.use));
-+	#if defined(CONFIG_IP_NF_CONNTRACK_MARK)
-+	len += sprintf(buffer + len, "mark=%ld ", conntrack->mark);
-+	#endif
- 
- 	#if defined(CONFIG_IP_NF_MATCH_LAYER7) || defined(CONFIG_IP_NF_MATCH_LAYER7_MODULE)
- 	if(conntrack->layer7.app_proto)
-diff -urN linux.old/net/ipv4/netfilter/ipt_CONNMARK.c linux.dev/net/ipv4/netfilter/ipt_CONNMARK.c
---- linux.old/net/ipv4/netfilter/ipt_CONNMARK.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/ipt_CONNMARK.c	2005-08-20 20:21:28.666970864 +0200
-@@ -0,0 +1,118 @@
-+/* This kernel module is used to modify the connection mark values, or
-+ * to optionally restore the skb nfmark from the connection mark
-+ *
-+ * Copyright (C) 2002,2004 MARA Systems AB <http://www.marasystems.com>
-+ * by Henrik Nordstrom <hno@marasystems.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/ip.h>
-+#include <net/checksum.h>
-+
-+MODULE_AUTHOR("Henrik Nordstrom <hno@marasytems.com>");
-+MODULE_DESCRIPTION("IP tables CONNMARK matching module");
-+MODULE_LICENSE("GPL");
-+
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ipt_CONNMARK.h>
-+#include <linux/netfilter_ipv4/ip_conntrack.h>
-+
-+static unsigned int
-+target(struct sk_buff **pskb,
-+       unsigned int hooknum,
-+       const struct net_device *in,
-+       const struct net_device *out,
-+       const void *targinfo,
-+       void *userinfo)
-+{
-+	const struct ipt_connmark_target_info *markinfo = targinfo;
-+	unsigned long diff;
-+	unsigned long nfmark;
-+	unsigned long newmark;
-+
-+	enum ip_conntrack_info ctinfo;
-+	struct ip_conntrack *ct = ip_conntrack_get((*pskb), &ctinfo);
-+	if (ct) {
-+	    switch(markinfo->mode) {
-+	    case IPT_CONNMARK_SET:
-+		newmark = (ct->mark & ~markinfo->mask) | markinfo->mark;
-+		if (newmark != ct->mark)
-+		    ct->mark = newmark;
-+		break;
-+	    case IPT_CONNMARK_SAVE:
-+		newmark = (ct->mark & ~markinfo->mask) | ((*pskb)->nfmark & markinfo->mask);
-+		if (ct->mark != newmark)
-+		    ct->mark = newmark;
-+		break;
-+	    case IPT_CONNMARK_RESTORE:
-+		nfmark = (*pskb)->nfmark;
-+		diff = (ct->mark ^ nfmark & markinfo->mask);
-+		if (diff != 0) {
-+		    (*pskb)->nfmark = nfmark ^ diff;
-+		    (*pskb)->nfcache |= NFC_ALTERED;
-+		}
-+		break;
-+	    }
-+	}
-+
-+	return IPT_CONTINUE;
-+}
-+
-+static int
-+checkentry(const char *tablename,
-+	   const struct ipt_entry *e,
-+	   void *targinfo,
-+	   unsigned int targinfosize,
-+	   unsigned int hook_mask)
-+{
-+	struct ipt_connmark_target_info *matchinfo = targinfo;
-+	if (targinfosize != IPT_ALIGN(sizeof(struct ipt_connmark_target_info))) {
-+		printk(KERN_WARNING "CONNMARK: targinfosize %u != %Zu\n",
-+		       targinfosize,
-+		       IPT_ALIGN(sizeof(struct ipt_connmark_target_info)));
-+		return 0;
-+	}
-+
-+	if (matchinfo->mode == IPT_CONNMARK_RESTORE) {
-+	    if (strcmp(tablename, "mangle") != 0) {
-+		    printk(KERN_WARNING "CONNMARK: restore can only be called from \"mangle\" table, not \"%s\"\n", tablename);
-+		    return 0;
-+	    }
-+	}
-+
-+	return 1;
-+}
-+
-+static struct ipt_target ipt_connmark_reg = {
-+	.name = "CONNMARK",
-+	.target = &target,
-+	.checkentry = &checkentry,
-+	.me = THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+	return ipt_register_target(&ipt_connmark_reg);
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_target(&ipt_connmark_reg);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux.old/net/ipv4/netfilter/ipt_connmark.c linux.dev/net/ipv4/netfilter/ipt_connmark.c
---- linux.old/net/ipv4/netfilter/ipt_connmark.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/ipt_connmark.c	2005-08-20 20:21:28.666970864 +0200
-@@ -0,0 +1,83 @@
-+/* This kernel module matches connection mark values set by the
-+ * CONNMARK target
-+ *
-+ * Copyright (C) 2002,2004 MARA Systems AB <http://www.marasystems.com>
-+ * by Henrik Nordstrom <hno@marasystems.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+
-+MODULE_AUTHOR("Henrik Nordstrom <hno@marasytems.com>");
-+MODULE_DESCRIPTION("IP tables connmark match module");
-+MODULE_LICENSE("GPL");
-+
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ipt_connmark.h>
-+#include <linux/netfilter_ipv4/ip_conntrack.h>
-+
-+static int
-+match(const struct sk_buff *skb,
-+      const struct net_device *in,
-+      const struct net_device *out,
-+      const void *matchinfo,
-+      int offset,
-+      const void *hdr,
-+      u_int16_t datalen,
-+      int *hotdrop)
-+{
-+	const struct ipt_connmark_info *info = matchinfo;
-+	enum ip_conntrack_info ctinfo;
-+	struct ip_conntrack *ct = ip_conntrack_get((struct sk_buff *)skb, &ctinfo);
-+	if (!ct)
-+	    return 0;
-+
-+	return ((ct->mark & info->mask) == info->mark) ^ info->invert;
-+}
-+
-+static int
-+checkentry(const char *tablename,
-+	   const struct ipt_ip *ip,
-+	   void *matchinfo,
-+	   unsigned int matchsize,
-+	   unsigned int hook_mask)
-+{
-+	if (matchsize != IPT_ALIGN(sizeof(struct ipt_connmark_info)))
-+		return 0;
-+
-+	return 1;
-+}
-+
-+static struct ipt_match connmark_match = {
-+	.name = "connmark",
-+	.match = &match,
-+	.checkentry = &checkentry,
-+	.me = THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+	return ipt_register_match(&connmark_match);
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_match(&connmark_match);
-+}
-+
-+module_init(init);
-+module_exit(fini);
diff --git a/openwrt/target/linux/generic-2.4/patches/608-netfilter_ipset.patch b/openwrt/target/linux/generic-2.4/patches/608-netfilter_ipset.patch
deleted file mode 100644
index 8cf5c694d0..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/608-netfilter_ipset.patch
+++ /dev/null
@@ -1,5725 +0,0 @@
-diff -Naur linux-old/Documentation/Configure.help linux-new/Documentation/Configure.help
---- linux-old/Documentation/Configure.help	2005-07-23 23:34:46.000000000 +0200
-+++ linux-new/Documentation/Configure.help	2005-08-10 22:13:01.000000000 +0200
-@@ -3209,6 +3209,75 @@
-   If you want to compile it as a module, say M here and read
-   <file:Documentation/modules.txt>.  If unsure, say `N'.
- 
-+IP set support
-+CONFIG_IP_NF_SET
-+  This option adds IP set support to the kernel.
-+
-+  In order to define and use sets, you need userlevel utilities: an
-+  iptables binary which knows about IP sets and the program ipset(8), 
-+  by which you can define and setup the sets themselves. 
-+
-+  If you want to compile it as a module, say M here and read
-+  <file:Documentation/modules.txt>.  If unsure, say `N'.
-+
-+set match support
-+CONFIG_IP_NF_MATCH_SET
-+  This option adds IP set match support.
-+  You need the ipset utility to create and set up the sets.
-+
-+  If you want to compile it as a module, say M here and read
-+  <file:Documentation/modules.txt>.  If unsure, say `N'.
-+
-+SET target support
-+CONFIG_IP_NF_TARGET_SET
-+  This option adds IP set target support.
-+  You need the ipset utility to create and set up the sets.
-+
-+  If you want to compile it as a module, say M here and read
-+  <file:Documentation/modules.txt>.  If unsure, say `N'.
-+
-+ipmap set type support
-+CONFIG_IP_NF_SET_IPMAP
-+  This option adds the ipmap set type support.
-+
-+  If you want to compile it as a module, say M here and read
-+  <file:Documentation/modules.txt>.  If unsure, say `N'.
-+
-+macipmap set type support
-+CONFIG_IP_NF_SET_MACIPMAP
-+  This option adds the macipmap set type support.
-+
-+  If you want to compile it as a module, say M here and read
-+  <file:Documentation/modules.txt>.  If unsure, say `N'.
-+
-+portmap set type support
-+CONFIG_IP_NF_SET_PORTMAP
-+  This option adds the portmap set type support.
-+
-+  If you want to compile it as a module, say M here and read
-+  <file:Documentation/modules.txt>.  If unsure, say `N'.
-+
-+iphash set type support
-+CONFIG_IP_NF_SET_IPHASH
-+  This option adds the iphash set type support.
-+
-+  If you want to compile it as a module, say M here and read
-+  <file:Documentation/modules.txt>.  If unsure, say `N'.
-+
-+nethash set type support
-+CONFIG_IP_NF_SET_NETHASH
-+  This option adds the nethash set type support.
-+
-+  If you want to compile it as a module, say M here and read
-+  <file:Documentation/modules.txt>.  If unsure, say `N'.
-+
-+iptree set type support
-+CONFIG_IP_NF_SET_IPTREE
-+  This option adds the iptree set type support.
-+
-+  If you want to compile it as a module, say M here and read
-+  <file:Documentation/modules.txt>.  If unsure, say `N'.
-+
- TTL target support
- CONFIG_IP_NF_TARGET_TTL
-   This option adds a `TTL' target, which enables the user to set
-diff -Naur linux-old/include/linux/netfilter_ipv4/ip_set.h linux-new/include/linux/netfilter_ipv4/ip_set.h
---- linux-old/include/linux/netfilter_ipv4/ip_set.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/include/linux/netfilter_ipv4/ip_set.h	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,489 @@
-+#ifndef _IP_SET_H
-+#define _IP_SET_H
-+
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ *                         Patrick Schaaf <bof@bof.de>
-+ *                         Martin Josefsson <gandalf@wlug.westbo.se>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/*
-+ * A sockopt of such quality has hardly ever been seen before on the open
-+ * market!  This little beauty, hardly ever used: above 64, so it's
-+ * traditionally used for firewalling, not touched (even once!) by the
-+ * 2.0, 2.2 and 2.4 kernels!
-+ *
-+ * Comes with its own certificate of authenticity, valid anywhere in the
-+ * Free world!
-+ *
-+ * Rusty, 19.4.2000
-+ */
-+#define SO_IP_SET 		83
-+
-+/*
-+ * Heavily modify by Joakim Axelsson 08.03.2002
-+ * - Made it more modulebased
-+ *
-+ * Additional heavy modifications by Jozsef Kadlecsik 22.02.2004
-+ * - bindings added
-+ * - in order to "deal with" backward compatibility, renamed to ipset
-+ */
-+
-+/* 
-+ * Used so that the kernel module and ipset-binary can match their versions 
-+ */
-+#define IP_SET_PROTOCOL_VERSION 2
-+
-+#define IP_SET_MAXNAMELEN 32	/* set names and set typenames */
-+
-+/* Lets work with our own typedef for representing an IP address.
-+ * We hope to make the code more portable, possibly to IPv6...
-+ *
-+ * The representation works in HOST byte order, because most set types
-+ * will perform arithmetic operations and compare operations.
-+ * 
-+ * For now the type is an uint32_t.
-+ *
-+ * Make sure to ONLY use the functions when translating and parsing
-+ * in order to keep the host byte order and make it more portable:
-+ *  parse_ip()
-+ *  parse_mask()
-+ *  parse_ipandmask()
-+ *  ip_tostring()
-+ * (Joakim: where are they???)
-+ */
-+
-+typedef uint32_t ip_set_ip_t;
-+
-+/* Sets are identified by an id in kernel space. Tweak with ip_set_id_t
-+ * and IP_SET_INVALID_ID if you want to increase the max number of sets.
-+ */
-+typedef uint16_t ip_set_id_t;
-+
-+#define IP_SET_INVALID_ID	65535
-+
-+/* How deep we follow bindings  */
-+#define IP_SET_MAX_BINDINGS	6
-+
-+/*
-+ * Option flags for kernel operations (ipt_set_info)
-+ */
-+#define IPSET_SRC 		0x01	/* Source match/add */
-+#define IPSET_DST		0x02	/* Destination match/add */
-+#define IPSET_MATCH_INV		0x04	/* Inverse matching */
-+
-+/*
-+ * Set types (flavours)
-+ */
-+#define IPSET_TYPE_IP		0	/* IP address type of set */
-+#define IPSET_TYPE_PORT		1	/* Port type of set */
-+
-+/* Reserved keywords */
-+#define IPSET_TOKEN_DEFAULT	":default:"
-+#define IPSET_TOKEN_ALL		":all:"
-+
-+/* SO_IP_SET operation constants, and their request struct types.
-+ *
-+ * Operation ids:
-+ *	  0-99:	 commands with version checking
-+ *	100-199: add/del/test/bind/unbind
-+ *	200-299: list, save, restore
-+ */
-+
-+/* Single shot operations: 
-+ * version, create, destroy, flush, rename and swap 
-+ *
-+ * Sets are identified by name.
-+ */
-+
-+#define IP_SET_REQ_STD		\
-+	unsigned op;		\
-+	unsigned version;	\
-+	char name[IP_SET_MAXNAMELEN]
-+
-+#define IP_SET_OP_CREATE	0x00000001	/* Create a new (empty) set */
-+struct ip_set_req_create {
-+	IP_SET_REQ_STD;
-+	char typename[IP_SET_MAXNAMELEN];
-+};
-+
-+#define IP_SET_OP_DESTROY	0x00000002	/* Remove a (empty) set */
-+struct ip_set_req_std {
-+	IP_SET_REQ_STD;
-+};
-+
-+#define IP_SET_OP_FLUSH		0x00000003	/* Remove all IPs in a set */
-+/* Uses ip_set_req_std */
-+
-+#define IP_SET_OP_RENAME	0x00000004	/* Rename a set */
-+/* Uses ip_set_req_create */
-+
-+#define IP_SET_OP_SWAP		0x00000005	/* Swap two sets */
-+/* Uses ip_set_req_create */
-+
-+union ip_set_name_index {
-+	char name[IP_SET_MAXNAMELEN];
-+	ip_set_id_t index;
-+};
-+
-+#define IP_SET_OP_GET_BYNAME	0x00000006	/* Get set index by name */
-+struct ip_set_req_get_set {
-+	unsigned op;
-+	unsigned version;
-+	union ip_set_name_index set;
-+};
-+
-+#define IP_SET_OP_GET_BYINDEX	0x00000007	/* Get set name by index */
-+/* Uses ip_set_req_get_set */
-+
-+#define IP_SET_OP_VERSION	0x00000100	/* Ask kernel version */
-+struct ip_set_req_version {
-+	unsigned op;
-+	unsigned version;
-+};
-+
-+/* Double shots operations: 
-+ * add, del, test, bind and unbind.
-+ *
-+ * First we query the kernel to get the index and type of the target set,
-+ * then issue the command. Validity of IP is checked in kernel in order
-+ * to minimalize sockopt operations.
-+ */
-+
-+/* Get minimal set data for add/del/test/bind/unbind IP */
-+#define IP_SET_OP_ADT_GET	0x00000010	/* Get set and type */
-+struct ip_set_req_adt_get {
-+	unsigned op;
-+	unsigned version;
-+	union ip_set_name_index set;
-+	char typename[IP_SET_MAXNAMELEN];
-+};
-+
-+#define IP_SET_REQ_BYINDEX	\
-+	unsigned op;		\
-+	ip_set_id_t index;
-+
-+struct ip_set_req_adt {
-+	IP_SET_REQ_BYINDEX;
-+};
-+
-+#define IP_SET_OP_ADD_IP	0x00000101	/* Add an IP to a set */
-+/* Uses ip_set_req_adt, with type specific addage */
-+
-+#define IP_SET_OP_DEL_IP	0x00000102	/* Remove an IP from a set */
-+/* Uses ip_set_req_adt, with type specific addage */
-+
-+#define IP_SET_OP_TEST_IP	0x00000103	/* Test an IP in a set */
-+/* Uses ip_set_req_adt, with type specific addage */
-+
-+#define IP_SET_OP_BIND_SET	0x00000104	/* Bind an IP to a set */
-+/* Uses ip_set_req_bind, with type specific addage */
-+struct ip_set_req_bind {
-+	IP_SET_REQ_BYINDEX;
-+	char binding[IP_SET_MAXNAMELEN];
-+};
-+
-+#define IP_SET_OP_UNBIND_SET	0x00000105	/* Unbind an IP from a set */
-+/* Uses ip_set_req_bind, with type speficic addage 
-+ * index = 0 means unbinding for all sets */
-+
-+#define IP_SET_OP_TEST_BIND_SET	0x00000106	/* Test binding an IP to a set */
-+/* Uses ip_set_req_bind, with type specific addage */
-+
-+/* Multiple shots operations: list, save, restore.
-+ *
-+ * - check kernel version and query the max number of sets
-+ * - get the basic information on all sets
-+ *   and size required for the next step
-+ * - get actual set data: header, data, bindings
-+ */
-+
-+/* Get max_sets and the index of a queried set
-+ */
-+#define IP_SET_OP_MAX_SETS	0x00000020
-+struct ip_set_req_max_sets {
-+	unsigned op;
-+	unsigned version;
-+	ip_set_id_t max_sets;		/* max_sets */
-+	ip_set_id_t sets;		/* real number of sets */
-+	union ip_set_name_index set;	/* index of set if name used */
-+};
-+
-+/* Get the id and name of the sets plus size for next step */
-+#define IP_SET_OP_LIST_SIZE	0x00000201
-+#define IP_SET_OP_SAVE_SIZE	0x00000202
-+struct ip_set_req_setnames {
-+	unsigned op;
-+	ip_set_id_t index;		/* set to list/save */
-+	size_t size;			/* size to get setdata/bindings */
-+	/* followed by sets number of struct ip_set_name_list */
-+};
-+
-+struct ip_set_name_list {
-+	char name[IP_SET_MAXNAMELEN];
-+	char typename[IP_SET_MAXNAMELEN];
-+	ip_set_id_t index;
-+	ip_set_id_t id;
-+};
-+
-+/* The actual list operation */
-+#define IP_SET_OP_LIST		0x00000203
-+struct ip_set_req_list {
-+	IP_SET_REQ_BYINDEX;
-+	/* sets number of struct ip_set_list in reply */ 
-+};
-+
-+struct ip_set_list {
-+	ip_set_id_t index;
-+	ip_set_id_t binding;
-+	u_int32_t ref;
-+	size_t header_size;	/* Set header data of header_size */
-+	size_t members_size;	/* Set members data of members_size */
-+	size_t bindings_size;	/* Set bindings data of bindings_size */
-+};
-+
-+struct ip_set_hash_list {
-+	ip_set_ip_t ip;
-+	ip_set_id_t binding;
-+};
-+
-+/* The save operation */
-+#define IP_SET_OP_SAVE		0x00000204
-+/* Uses ip_set_req_list, in the reply replaced by
-+ * sets number of struct ip_set_save plus a marker
-+ * ip_set_save followed by ip_set_hash_save structures.
-+ */
-+struct ip_set_save {
-+	ip_set_id_t index;
-+	ip_set_id_t binding;
-+	size_t header_size;	/* Set header data of header_size */
-+	size_t members_size;	/* Set members data of members_size */
-+};
-+
-+/* At restoring, ip == 0 means default binding for the given set: */
-+struct ip_set_hash_save {
-+	ip_set_ip_t ip;
-+	ip_set_id_t id;
-+	ip_set_id_t binding;
-+};
-+
-+/* The restore operation */
-+#define IP_SET_OP_RESTORE	0x00000205
-+/* Uses ip_set_req_setnames followed by ip_set_restore structures
-+ * plus a marker ip_set_restore, followed by ip_set_hash_save 
-+ * structures.
-+ */
-+struct ip_set_restore {
-+	char name[IP_SET_MAXNAMELEN];
-+	char typename[IP_SET_MAXNAMELEN];
-+	ip_set_id_t index;
-+	size_t header_size;	/* Create data of header_size */
-+	size_t members_size;	/* Set members data of members_size */
-+};
-+
-+static inline int bitmap_bytes(ip_set_ip_t a, ip_set_ip_t b)
-+{
-+	return 4 * ((((b - a + 8) / 8) + 3) / 4);
-+}
-+
-+#ifdef __KERNEL__
-+
-+#define ip_set_printk(format, args...) 			\
-+	do {							\
-+		printk("%s: %s: ", __FILE__, __FUNCTION__);	\
-+		printk(format "\n" , ## args);			\
-+	} while (0)
-+
-+#if defined(IP_SET_DEBUG)
-+#define DP(format, args...) 					\
-+	do {							\
-+		printk("%s: %s (DBG): ", __FILE__, __FUNCTION__);\
-+		printk(format "\n" , ## args);			\
-+	} while (0)
-+#define IP_SET_ASSERT(x)					\
-+	do {							\
-+		if (!(x))					\
-+			printk("IP_SET_ASSERT: %s:%i(%s)\n",	\
-+				__FILE__, __LINE__, __FUNCTION__); \
-+	} while (0)
-+#else
-+#define DP(format, args...)
-+#define IP_SET_ASSERT(x)
-+#endif
-+
-+struct ip_set;
-+
-+/*
-+ * The ip_set_type definition - one per set type, e.g. "ipmap".
-+ *
-+ * Each individual set has a pointer, set->type, going to one
-+ * of these structures. Function pointers inside the structure implement
-+ * the real behaviour of the sets.
-+ *
-+ * If not mentioned differently, the implementation behind the function
-+ * pointers of a set_type, is expected to return 0 if ok, and a negative
-+ * errno (e.g. -EINVAL) on error.
-+ */
-+struct ip_set_type {
-+	struct list_head list;	/* next in list of set types */
-+
-+	/* test for IP in set (kernel: iptables -m set src|dst)
-+	 * return 0 if not in set, 1 if in set.
-+	 */
-+	int (*testip_kernel) (struct ip_set *set,
-+			      const struct sk_buff * skb, 
-+			      u_int32_t flags,
-+			      ip_set_ip_t *ip);
-+
-+	/* test for IP in set (userspace: ipset -T set IP)
-+	 * return 0 if not in set, 1 if in set.
-+	 */
-+	int (*testip) (struct ip_set *set,
-+		       const void *data, size_t size,
-+		       ip_set_ip_t *ip);
-+
-+	/*
-+	 * Size of the data structure passed by when
-+	 * adding/deletin/testing an entry.
-+	 */
-+	size_t reqsize;
-+
-+	/* Add IP into set (userspace: ipset -A set IP)
-+	 * Return -EEXIST if the address is already in the set,
-+	 * and -ERANGE if the address lies outside the set bounds.
-+	 * If the address was not already in the set, 0 is returned.
-+	 */
-+	int (*addip) (struct ip_set *set, 
-+		      const void *data, size_t size,
-+		      ip_set_ip_t *ip);
-+
-+	/* Add IP into set (kernel: iptables ... -j SET set src|dst)
-+	 * Return -EEXIST if the address is already in the set,
-+	 * and -ERANGE if the address lies outside the set bounds.
-+	 * If the address was not already in the set, 0 is returned.
-+	 */
-+	int (*addip_kernel) (struct ip_set *set,
-+			     const struct sk_buff * skb, 
-+			     u_int32_t flags,
-+			     ip_set_ip_t *ip);
-+
-+	/* remove IP from set (userspace: ipset -D set --entry x)
-+	 * Return -EEXIST if the address is NOT in the set,
-+	 * and -ERANGE if the address lies outside the set bounds.
-+	 * If the address really was in the set, 0 is returned.
-+	 */
-+	int (*delip) (struct ip_set *set, 
-+		      const void *data, size_t size,
-+		      ip_set_ip_t *ip);
-+
-+	/* remove IP from set (kernel: iptables ... -j SET --entry x)
-+	 * Return -EEXIST if the address is NOT in the set,
-+	 * and -ERANGE if the address lies outside the set bounds.
-+	 * If the address really was in the set, 0 is returned.
-+	 */
-+	int (*delip_kernel) (struct ip_set *set,
-+			     const struct sk_buff * skb, 
-+			     u_int32_t flags,
-+			     ip_set_ip_t *ip);
-+
-+	/* new set creation - allocated type specific items
-+	 */
-+	int (*create) (struct ip_set *set,
-+		       const void *data, size_t size);
-+
-+	/* retry the operation after successfully tweaking the set
-+	 */
-+	int (*retry) (struct ip_set *set);
-+
-+	/* set destruction - free type specific items
-+	 * There is no return value.
-+	 * Can be called only when child sets are destroyed.
-+	 */
-+	void (*destroy) (struct ip_set *set);
-+
-+	/* set flushing - reset all bits in the set, or something similar.
-+	 * There is no return value.
-+	 */
-+	void (*flush) (struct ip_set *set);
-+
-+	/* Listing: size needed for header
-+	 */
-+	size_t header_size;
-+
-+	/* Listing: Get the header
-+	 *
-+	 * Fill in the information in "data".
-+	 * This function is always run after list_header_size() under a 
-+	 * writelock on the set. Therefor is the length of "data" always 
-+	 * correct. 
-+	 */
-+	void (*list_header) (const struct ip_set *set, 
-+			     void *data);
-+
-+	/* Listing: Get the size for the set members
-+	 */
-+	int (*list_members_size) (const struct ip_set *set);
-+
-+	/* Listing: Get the set members
-+	 *
-+	 * Fill in the information in "data".
-+	 * This function is always run after list_member_size() under a 
-+	 * writelock on the set. Therefor is the length of "data" always 
-+	 * correct. 
-+	 */
-+	void (*list_members) (const struct ip_set *set,
-+			      void *data);
-+
-+	char typename[IP_SET_MAXNAMELEN];
-+	char typecode;
-+	int protocol_version;
-+
-+	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
-+	struct module *me;
-+};
-+
-+extern int ip_set_register_set_type(struct ip_set_type *set_type);
-+extern void ip_set_unregister_set_type(struct ip_set_type *set_type);
-+
-+/* A generic ipset */
-+struct ip_set {
-+	char name[IP_SET_MAXNAMELEN];	/* the name of the set */
-+	rwlock_t lock;			/* lock for concurrency control */
-+	ip_set_id_t id;			/* set id for swapping */
-+	ip_set_id_t binding;		/* default binding for the set */
-+	atomic_t ref;			/* in kernel and in hash references */
-+	struct ip_set_type *type; 	/* the set types */
-+	void *data;			/* pooltype specific data */
-+};
-+
-+/* Structure to bind set elements to sets */
-+struct ip_set_hash {
-+	struct list_head list;		/* list of clashing entries in hash */
-+	ip_set_ip_t ip;			/* ip from set */
-+	ip_set_id_t id;			/* set id */
-+	ip_set_id_t binding;		/* set we bind the element to */
-+};
-+
-+/* register and unregister set references */
-+extern ip_set_id_t ip_set_get_byname(const char name[IP_SET_MAXNAMELEN]);
-+extern ip_set_id_t ip_set_get_byindex(ip_set_id_t id);
-+extern void ip_set_put(ip_set_id_t id);
-+
-+/* API for iptables set match, and SET target */
-+extern void ip_set_addip_kernel(ip_set_id_t id,
-+				const struct sk_buff *skb,
-+				const u_int32_t *flags);
-+extern void ip_set_delip_kernel(ip_set_id_t id,
-+				const struct sk_buff *skb,
-+				const u_int32_t *flags);
-+extern int ip_set_testip_kernel(ip_set_id_t id,
-+				const struct sk_buff *skb,
-+				const u_int32_t *flags);
-+
-+#endif				/* __KERNEL__ */
-+
-+#endif /*_IP_SET_H*/
-diff -Naur linux-old/include/linux/netfilter_ipv4/ip_set_iphash.h linux-new/include/linux/netfilter_ipv4/ip_set_iphash.h
---- linux-old/include/linux/netfilter_ipv4/ip_set_iphash.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/include/linux/netfilter_ipv4/ip_set_iphash.h	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,30 @@
-+#ifndef __IP_SET_IPHASH_H
-+#define __IP_SET_IPHASH_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "iphash"
-+#define MAX_RANGE 0x0000FFFF
-+
-+struct ip_set_iphash {
-+	ip_set_ip_t *members;		/* the iphash proper */
-+	uint32_t initval;		/* initval for jhash_1word */
-+	uint32_t prime;			/* prime for double hashing */
-+	uint32_t hashsize;		/* hash size */
-+	uint16_t probes;		/* max number of probes  */
-+	uint16_t resize;		/* resize factor in percent */
-+	ip_set_ip_t netmask;		/* netmask */
-+};
-+
-+struct ip_set_req_iphash_create {
-+	uint32_t hashsize;
-+	uint16_t probes;
-+	uint16_t resize;
-+	ip_set_ip_t netmask;
-+};
-+
-+struct ip_set_req_iphash {
-+	ip_set_ip_t ip;
-+};
-+
-+#endif	/* __IP_SET_IPHASH_H */
-diff -Naur linux-old/include/linux/netfilter_ipv4/ip_set_ipmap.h linux-new/include/linux/netfilter_ipv4/ip_set_ipmap.h
---- linux-old/include/linux/netfilter_ipv4/ip_set_ipmap.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/include/linux/netfilter_ipv4/ip_set_ipmap.h	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,56 @@
-+#ifndef __IP_SET_IPMAP_H
-+#define __IP_SET_IPMAP_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "ipmap"
-+#define MAX_RANGE 0x0000FFFF
-+
-+struct ip_set_ipmap {
-+	void *members;			/* the ipmap proper */
-+	ip_set_ip_t first_ip;		/* host byte order, included in range */
-+	ip_set_ip_t last_ip;		/* host byte order, included in range */
-+	ip_set_ip_t netmask;		/* subnet netmask */
-+	ip_set_ip_t sizeid;		/* size of set in IPs */
-+	u_int16_t hosts;		/* number of hosts in a subnet */
-+};
-+
-+struct ip_set_req_ipmap_create {
-+	ip_set_ip_t from;
-+	ip_set_ip_t to;
-+	ip_set_ip_t netmask;
-+};
-+
-+struct ip_set_req_ipmap {
-+	ip_set_ip_t ip;
-+};
-+
-+unsigned int
-+mask_to_bits(ip_set_ip_t mask)
-+{
-+	unsigned int bits = 32;
-+	ip_set_ip_t maskaddr;
-+	
-+	if (mask == 0xFFFFFFFF)
-+		return bits;
-+	
-+	maskaddr = 0xFFFFFFFE;
-+	while (--bits >= 0 && maskaddr != mask)
-+		maskaddr <<= 1;
-+	
-+	return bits;
-+}
-+
-+ip_set_ip_t
-+range_to_mask(ip_set_ip_t from, ip_set_ip_t to, unsigned int *bits)
-+{
-+	ip_set_ip_t mask = 0xFFFFFFFE;
-+	
-+	*bits = 32;
-+	while (--(*bits) >= 0 && mask && (to & mask) != from)
-+		mask <<= 1;
-+		
-+	return mask;
-+}
-+	
-+#endif /* __IP_SET_IPMAP_H */
-diff -Naur linux-old/include/linux/netfilter_ipv4/ip_set_iptree.h linux-new/include/linux/netfilter_ipv4/ip_set_iptree.h
---- linux-old/include/linux/netfilter_ipv4/ip_set_iptree.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/include/linux/netfilter_ipv4/ip_set_iptree.h	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,39 @@
-+#ifndef __IP_SET_IPTREE_H
-+#define __IP_SET_IPTREE_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "iptree"
-+#define MAX_RANGE 0x0000FFFF
-+
-+struct ip_set_iptreed {
-+	unsigned long expires[255];	   	/* x.x.x.ADDR */
-+};
-+
-+struct ip_set_iptreec {
-+	struct ip_set_iptreed *tree[255];	/* x.x.ADDR.* */
-+};
-+
-+struct ip_set_iptreeb {
-+	struct ip_set_iptreec *tree[255];	/* x.ADDR.*.* */
-+};
-+
-+struct ip_set_iptree {
-+	unsigned int timeout;
-+	unsigned int gc_interval;
-+#ifdef __KERNEL__
-+	struct timer_list gc;
-+	struct ip_set_iptreeb *tree[255];	/* ADDR.*.*.* */
-+#endif
-+};
-+
-+struct ip_set_req_iptree_create {
-+	unsigned int timeout;
-+};
-+
-+struct ip_set_req_iptree {
-+	ip_set_ip_t ip;
-+	unsigned int timeout;
-+};
-+
-+#endif	/* __IP_SET_IPTREE_H */
-diff -Naur linux-old/include/linux/netfilter_ipv4/ip_set_jhash.h linux-new/include/linux/netfilter_ipv4/ip_set_jhash.h
---- linux-old/include/linux/netfilter_ipv4/ip_set_jhash.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/include/linux/netfilter_ipv4/ip_set_jhash.h	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,148 @@
-+#ifndef _LINUX_IPSET_JHASH_H
-+#define _LINUX_IPSET_JHASH_H
-+
-+/* This is a copy of linux/jhash.h but the types u32/u8 are changed
-+ * to __u32/__u8 so that the header file can be included into
-+ * userspace code as well. Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
-+ */
-+
-+/* jhash.h: Jenkins hash support.
-+ *
-+ * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net)
-+ *
-+ * http://burtleburtle.net/bob/hash/
-+ *
-+ * These are the credits from Bob's sources:
-+ *
-+ * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
-+ * hash(), hash2(), hash3, and mix() are externally useful functions.
-+ * Routines to test the hash are included if SELF_TEST is defined.
-+ * You can use this free for any purpose.  It has no warranty.
-+ *
-+ * Copyright (C) 2003 David S. Miller (davem@redhat.com)
-+ *
-+ * I've modified Bob's hash to be useful in the Linux kernel, and
-+ * any bugs present are surely my fault.  -DaveM
-+ */
-+
-+/* NOTE: Arguments are modified. */
-+#define __jhash_mix(a, b, c) \
-+{ \
-+  a -= b; a -= c; a ^= (c>>13); \
-+  b -= c; b -= a; b ^= (a<<8); \
-+  c -= a; c -= b; c ^= (b>>13); \
-+  a -= b; a -= c; a ^= (c>>12);  \
-+  b -= c; b -= a; b ^= (a<<16); \
-+  c -= a; c -= b; c ^= (b>>5); \
-+  a -= b; a -= c; a ^= (c>>3);  \
-+  b -= c; b -= a; b ^= (a<<10); \
-+  c -= a; c -= b; c ^= (b>>15); \
-+}
-+
-+/* The golden ration: an arbitrary value */
-+#define JHASH_GOLDEN_RATIO	0x9e3779b9
-+
-+/* The most generic version, hashes an arbitrary sequence
-+ * of bytes.  No alignment or length assumptions are made about
-+ * the input key.
-+ */
-+static inline __u32 jhash(void *key, __u32 length, __u32 initval)
-+{
-+	__u32 a, b, c, len;
-+	__u8 *k = key;
-+
-+	len = length;
-+	a = b = JHASH_GOLDEN_RATIO;
-+	c = initval;
-+
-+	while (len >= 12) {
-+		a += (k[0] +((__u32)k[1]<<8) +((__u32)k[2]<<16) +((__u32)k[3]<<24));
-+		b += (k[4] +((__u32)k[5]<<8) +((__u32)k[6]<<16) +((__u32)k[7]<<24));
-+		c += (k[8] +((__u32)k[9]<<8) +((__u32)k[10]<<16)+((__u32)k[11]<<24));
-+
-+		__jhash_mix(a,b,c);
-+
-+		k += 12;
-+		len -= 12;
-+	}
-+
-+	c += length;
-+	switch (len) {
-+	case 11: c += ((__u32)k[10]<<24);
-+	case 10: c += ((__u32)k[9]<<16);
-+	case 9 : c += ((__u32)k[8]<<8);
-+	case 8 : b += ((__u32)k[7]<<24);
-+	case 7 : b += ((__u32)k[6]<<16);
-+	case 6 : b += ((__u32)k[5]<<8);
-+	case 5 : b += k[4];
-+	case 4 : a += ((__u32)k[3]<<24);
-+	case 3 : a += ((__u32)k[2]<<16);
-+	case 2 : a += ((__u32)k[1]<<8);
-+	case 1 : a += k[0];
-+	};
-+
-+	__jhash_mix(a,b,c);
-+
-+	return c;
-+}
-+
-+/* A special optimized version that handles 1 or more of __u32s.
-+ * The length parameter here is the number of __u32s in the key.
-+ */
-+static inline __u32 jhash2(__u32 *k, __u32 length, __u32 initval)
-+{
-+	__u32 a, b, c, len;
-+
-+	a = b = JHASH_GOLDEN_RATIO;
-+	c = initval;
-+	len = length;
-+
-+	while (len >= 3) {
-+		a += k[0];
-+		b += k[1];
-+		c += k[2];
-+		__jhash_mix(a, b, c);
-+		k += 3; len -= 3;
-+	}
-+
-+	c += length * 4;
-+
-+	switch (len) {
-+	case 2 : b += k[1];
-+	case 1 : a += k[0];
-+	};
-+
-+	__jhash_mix(a,b,c);
-+
-+	return c;
-+}
-+
-+
-+/* A special ultra-optimized versions that knows they are hashing exactly
-+ * 3, 2 or 1 word(s).
-+ *
-+ * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
-+ *       done at the end is not done here.
-+ */
-+static inline __u32 jhash_3words(__u32 a, __u32 b, __u32 c, __u32 initval)
-+{
-+	a += JHASH_GOLDEN_RATIO;
-+	b += JHASH_GOLDEN_RATIO;
-+	c += initval;
-+
-+	__jhash_mix(a, b, c);
-+
-+	return c;
-+}
-+
-+static inline __u32 jhash_2words(__u32 a, __u32 b, __u32 initval)
-+{
-+	return jhash_3words(a, b, 0, initval);
-+}
-+
-+static inline __u32 jhash_1word(__u32 a, __u32 initval)
-+{
-+	return jhash_3words(a, 0, 0, initval);
-+}
-+
-+#endif /* _LINUX_IPSET_JHASH_H */
-diff -Naur linux-old/include/linux/netfilter_ipv4/ip_set_macipmap.h linux-new/include/linux/netfilter_ipv4/ip_set_macipmap.h
---- linux-old/include/linux/netfilter_ipv4/ip_set_macipmap.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/include/linux/netfilter_ipv4/ip_set_macipmap.h	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,38 @@
-+#ifndef __IP_SET_MACIPMAP_H
-+#define __IP_SET_MACIPMAP_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "macipmap"
-+#define MAX_RANGE 0x0000FFFF
-+
-+/* general flags */
-+#define IPSET_MACIP_MATCHUNSET	1
-+
-+/* per ip flags */
-+#define IPSET_MACIP_ISSET	1
-+
-+struct ip_set_macipmap {
-+	void *members;			/* the macipmap proper */
-+	ip_set_ip_t first_ip;		/* host byte order, included in range */
-+	ip_set_ip_t last_ip;		/* host byte order, included in range */
-+	u_int32_t flags;
-+};
-+
-+struct ip_set_req_macipmap_create {
-+	ip_set_ip_t from;
-+	ip_set_ip_t to;
-+	u_int32_t flags;
-+};
-+
-+struct ip_set_req_macipmap {
-+	ip_set_ip_t ip;
-+	unsigned char ethernet[ETH_ALEN];
-+};
-+
-+struct ip_set_macip {
-+	unsigned short flags;
-+	unsigned char ethernet[ETH_ALEN];
-+};
-+
-+#endif	/* __IP_SET_MACIPMAP_H */
-diff -Naur linux-old/include/linux/netfilter_ipv4/ip_set_malloc.h linux-new/include/linux/netfilter_ipv4/ip_set_malloc.h
---- linux-old/include/linux/netfilter_ipv4/ip_set_malloc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/include/linux/netfilter_ipv4/ip_set_malloc.h	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,27 @@
-+#ifndef _IP_SET_MALLOC_H
-+#define _IP_SET_MALLOC_H
-+
-+#ifdef __KERNEL__
-+
-+/* Memory allocation and deallocation */
-+static size_t max_malloc_size = 131072;		/* Guaranteed: slab.c */
-+
-+static inline void * ip_set_malloc(size_t bytes)
-+{
-+	if (bytes > max_malloc_size)
-+		return vmalloc(bytes);
-+	else
-+		return kmalloc(bytes, GFP_KERNEL);
-+}
-+
-+static inline void ip_set_free(void * data, size_t bytes)
-+{
-+	if (bytes > max_malloc_size)
-+		vfree(data);
-+	else
-+		kfree(data);
-+}
-+
-+#endif				/* __KERNEL__ */
-+
-+#endif /*_IP_SET_MALLOC_H*/
-diff -Naur linux-old/include/linux/netfilter_ipv4/ip_set_nethash.h linux-new/include/linux/netfilter_ipv4/ip_set_nethash.h
---- linux-old/include/linux/netfilter_ipv4/ip_set_nethash.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/include/linux/netfilter_ipv4/ip_set_nethash.h	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,55 @@
-+#ifndef __IP_SET_NETHASH_H
-+#define __IP_SET_NETHASH_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "nethash"
-+#define MAX_RANGE 0x0000FFFF
-+
-+struct ip_set_nethash {
-+	ip_set_ip_t *members;		/* the nethash proper */
-+	uint32_t initval;		/* initval for jhash_1word */
-+	uint32_t prime;			/* prime for double hashing */
-+	uint32_t hashsize;		/* hash size */
-+	uint16_t probes;		/* max number of probes  */
-+	uint16_t resize;		/* resize factor in percent */
-+	unsigned char cidr[30];		/* CIDR sizes */
-+};
-+
-+struct ip_set_req_nethash_create {
-+	uint32_t hashsize;
-+	uint16_t probes;
-+	uint16_t resize;
-+};
-+
-+struct ip_set_req_nethash {
-+	ip_set_ip_t ip;
-+	unsigned char cidr;
-+};
-+
-+static unsigned char shifts[] = {255, 253, 249, 241, 225, 193, 129, 1};
-+
-+static inline ip_set_ip_t 
-+pack(ip_set_ip_t ip, unsigned char cidr)
-+{
-+	ip_set_ip_t addr, *paddr = &addr;
-+	unsigned char n, t, *a;
-+
-+	addr = htonl(ip & (0xFFFFFFFF << (32 - (cidr))));
-+#ifdef __KERNEL__
-+	DP("ip:%u.%u.%u.%u/%u", NIPQUAD(addr), cidr);
-+#endif
-+	n = cidr / 8;
-+	t = cidr % 8;	
-+	a = &((unsigned char *)paddr)[n];
-+	*a = *a /(1 << (8 - t)) + shifts[t];
-+#ifdef __KERNEL__
-+	DP("n: %u, t: %u, a: %u", n, t, *a);
-+	DP("ip:%u.%u.%u.%u/%u, %u.%u.%u.%u",
-+	   HIPQUAD(ip), cidr, NIPQUAD(addr));
-+#endif
-+
-+	return ntohl(addr);
-+}
-+
-+#endif	/* __IP_SET_NETHASH_H */
-diff -Naur linux-old/include/linux/netfilter_ipv4/ip_set_portmap.h linux-new/include/linux/netfilter_ipv4/ip_set_portmap.h
---- linux-old/include/linux/netfilter_ipv4/ip_set_portmap.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/include/linux/netfilter_ipv4/ip_set_portmap.h	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,25 @@
-+#ifndef __IP_SET_PORTMAP_H
-+#define __IP_SET_PORTMAP_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME	"portmap"
-+#define MAX_RANGE	0x0000FFFF
-+#define INVALID_PORT	(MAX_RANGE + 1)
-+
-+struct ip_set_portmap {
-+	void *members;			/* the portmap proper */
-+	ip_set_ip_t first_port;		/* host byte order, included in range */
-+	ip_set_ip_t last_port;		/* host byte order, included in range */
-+};
-+
-+struct ip_set_req_portmap_create {
-+	ip_set_ip_t from;
-+	ip_set_ip_t to;
-+};
-+
-+struct ip_set_req_portmap {
-+	ip_set_ip_t port;
-+};
-+
-+#endif /* __IP_SET_PORTMAP_H */
-diff -Naur linux-old/include/linux/netfilter_ipv4/ip_set_prime.h linux-new/include/linux/netfilter_ipv4/ip_set_prime.h
---- linux-old/include/linux/netfilter_ipv4/ip_set_prime.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/include/linux/netfilter_ipv4/ip_set_prime.h	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,34 @@
-+#ifndef __IP_SET_PRIME_H
-+#define __IP_SET_PRIME_H
-+
-+static inline unsigned make_prime_bound(unsigned nr)
-+{
-+	unsigned long long nr64 = nr;
-+	unsigned long long x = 1;
-+	nr = 1;
-+	while (x <= nr64) { x <<= 2; nr <<= 1; }
-+	return nr;
-+}
-+
-+static inline int make_prime_check(unsigned nr)
-+{
-+	unsigned x = 3;
-+	unsigned b = make_prime_bound(nr);
-+	while (x <= b) {
-+		if (0 == (nr % x)) return 0;
-+		x += 2;
-+	}
-+	return 1;
-+}
-+
-+static unsigned make_prime(unsigned nr)
-+{
-+	if (0 == (nr & 1)) nr--;
-+	while (nr > 1) {
-+		if (make_prime_check(nr)) return nr;
-+		nr -= 2;
-+	}
-+	return 2;
-+}
-+
-+#endif /* __IP_SET_PRIME_H */
-diff -Naur linux-old/include/linux/netfilter_ipv4/ipt_set.h linux-new/include/linux/netfilter_ipv4/ipt_set.h
---- linux-old/include/linux/netfilter_ipv4/ipt_set.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/include/linux/netfilter_ipv4/ipt_set.h	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,21 @@
-+#ifndef _IPT_SET_H
-+#define _IPT_SET_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+struct ipt_set_info {
-+	ip_set_id_t index;
-+	u_int32_t flags[IP_SET_MAX_BINDINGS + 1];
-+};
-+
-+/* match info */
-+struct ipt_set_info_match {
-+	struct ipt_set_info match_set;
-+};
-+
-+struct ipt_set_info_target {
-+	struct ipt_set_info add_set;
-+	struct ipt_set_info del_set;
-+};
-+
-+#endif /*_IPT_SET_H*/
-diff -Naur linux-old/net/ipv4/netfilter/Config.in linux-new/net/ipv4/netfilter/Config.in
---- linux-old/net/ipv4/netfilter/Config.in	2005-07-23 23:34:46.000000000 +0200
-+++ linux-new/net/ipv4/netfilter/Config.in	2005-08-10 22:13:01.000000000 +0200
-@@ -21,6 +21,20 @@
- if [ "$CONFIG_IP_NF_IPTABLES" != "n" ]; then
- # The simple matches.
-   dep_tristate '  limit match support' CONFIG_IP_NF_MATCH_LIMIT $CONFIG_IP_NF_IPTABLES
-+
-+  dep_tristate '  IP set support' CONFIG_IP_NF_SET $CONFIG_IP_NF_IPTABLES
-+  if [ "$CONFIG_IP_NF_SET" != "n" ]; then
-+    int '     Maximum number of sets' CONFIG_IP_NF_SET_MAX 256
-+    int '     Hash size for bindings of IP sets' CONFIG_IP_NF_SET_HASHSIZE 1024
-+    dep_tristate '    set match support' CONFIG_IP_NF_MATCH_SET $CONFIG_IP_NF_SET
-+    dep_tristate '    SET target support' CONFIG_IP_NF_TARGET_SET $CONFIG_IP_NF_SET
-+    dep_tristate '    ipmap set type support' CONFIG_IP_NF_SET_IPMAP $CONFIG_IP_NF_SET
-+    dep_tristate '    portmap set type support' CONFIG_IP_NF_SET_PORTMAP $CONFIG_IP_NF_SET
-+    dep_tristate '    macipmap set type support' CONFIG_IP_NF_SET_MACIPMAP $CONFIG_IP_NF_SET
-+    dep_tristate '    iphash set type support' CONFIG_IP_NF_SET_IPHASH $CONFIG_IP_NF_SET
-+    dep_tristate '    nethash set type support' CONFIG_IP_NF_SET_NETHASH $CONFIG_IP_NF_SET
-+    dep_tristate '    iptree set type support' CONFIG_IP_NF_SET_IPTREE $CONFIG_IP_NF_SET
-+  fi
-   dep_tristate '  MAC address match support' CONFIG_IP_NF_MATCH_MAC $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  Packet type match support' CONFIG_IP_NF_MATCH_PKTTYPE $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  netfilter MARK match support' CONFIG_IP_NF_MATCH_MARK $CONFIG_IP_NF_IPTABLES
-diff -Naur linux-old/net/ipv4/netfilter/ip_set.c linux-new/net/ipv4/netfilter/ip_set.c
---- linux-old/net/ipv4/netfilter/ip_set.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/net/ipv4/netfilter/ip_set.c	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,2002 @@
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ *                         Patrick Schaaf <bof@bof.de>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module for IP set management */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kmod.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/random.h>
-+#include <linux/jhash.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <asm/softirq.h>
-+#include <asm/semaphore.h>
-+#include <linux/spinlock.h>
-+#include <linux/vmalloc.h>
-+
-+#define ASSERT_READ_LOCK(x)	/* dont use that */
-+#define ASSERT_WRITE_LOCK(x)
-+#include <linux/netfilter_ipv4/listhelp.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+static struct list_head set_type_list;		/* all registered sets */
-+static struct ip_set **ip_set_list;		/* all individual sets */
-+static DECLARE_RWLOCK(ip_set_lock);		/* protects the lists and the hash */
-+static DECLARE_MUTEX(ip_set_app_mutex);		/* serializes user access */
-+static ip_set_id_t ip_set_max = CONFIG_IP_NF_SET_MAX;
-+static ip_set_id_t ip_set_bindings_hash_size =  CONFIG_IP_NF_SET_HASHSIZE;
-+static struct list_head *ip_set_hash;		/* hash of bindings */
-+static unsigned int ip_set_hash_random;		/* random seed */
-+
-+/* Arrgh */
-+#ifdef MODULE
-+#define __MOD_INC(foo) 		__MOD_INC_USE_COUNT(foo)
-+#define __MOD_DEC(foo) 		__MOD_DEC_USE_COUNT(foo)
-+#define __MOD_INC_SELF		MOD_INC_USE_COUNT
-+#define __MOD_DEC_SELF		MOD_DEC_USE_COUNT
-+#else
-+#define __MOD_INC(foo)
-+#define __MOD_DEC(foo)
-+#define __MOD_INC_SELF
-+#define __MOD_DEC_SELF
-+#endif
-+
-+/*
-+ * Sets are identified either by the index in ip_set_list or by id.
-+ * The id never changes and is used to find a key in the hash. 
-+ * The index may change by swapping and used at all other places 
-+ * (set/SET netfilter modules, binding value, etc.)
-+ *
-+ * Userspace requests are serialized by ip_set_mutex and sets can
-+ * be deleted only from userspace. Therefore ip_set_list locking 
-+ * must obey the following rules:
-+ *
-+ * - kernel requests: read and write locking mandatory
-+ * - user requests: read locking optional, write locking mandatory
-+ */
-+
-+static inline void
-+__ip_set_get(ip_set_id_t index)
-+{
-+	atomic_inc(&ip_set_list[index]->ref);
-+}
-+
-+static inline void
-+__ip_set_put(ip_set_id_t index)
-+{
-+	atomic_dec(&ip_set_list[index]->ref);
-+}
-+
-+/*
-+ * Binding routines
-+ */
-+
-+static inline int
-+ip_hash_cmp(const struct ip_set_hash *set_hash,
-+	    ip_set_id_t id, ip_set_ip_t ip)
-+{
-+	return set_hash->id == id && set_hash->ip == ip;
-+}
-+
-+static ip_set_id_t
-+ip_set_find_in_hash(ip_set_id_t id, ip_set_ip_t ip)
-+{
-+	u_int32_t key = jhash_2words(id, ip, ip_set_hash_random) 
-+				% ip_set_bindings_hash_size;
-+	struct ip_set_hash *set_hash;
-+
-+	MUST_BE_READ_LOCKED(&ip_set_lock);
-+	IP_SET_ASSERT(ip_set_list[id]);
-+	DP("set: %s, ip: %u.%u.%u.%u", ip_set_list[id]->name, HIPQUAD(ip));	
-+	
-+	set_hash = LIST_FIND(&ip_set_hash[key], ip_hash_cmp,
-+			     struct ip_set_hash *, id, ip);
-+	
-+	DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name, 
-+	   HIPQUAD(ip),
-+	   set_hash != NULL ? ip_set_list[set_hash->binding]->name : "");
-+
-+	return (set_hash != NULL ? set_hash->binding : IP_SET_INVALID_ID);
-+}
-+
-+static inline void 
-+__set_hash_del(struct ip_set_hash *set_hash)
-+{
-+	MUST_BE_WRITE_LOCKED(&ip_set_lock);
-+	IP_SET_ASSERT(ip_set_list[set_hash->binding]);	
-+
-+	__ip_set_put(set_hash->binding);
-+	list_del(&set_hash->list);
-+	kfree(set_hash);
-+}
-+
-+static int
-+ip_set_hash_del(ip_set_id_t id, ip_set_ip_t ip)
-+{
-+	u_int32_t key = jhash_2words(id, ip, ip_set_hash_random)
-+				% ip_set_bindings_hash_size;
-+	struct ip_set_hash *set_hash;
-+	
-+	IP_SET_ASSERT(ip_set_list[id]);
-+	DP("set: %s, ip: %u.%u.%u.%u", ip_set_list[id]->name, HIPQUAD(ip));	
-+	WRITE_LOCK(&ip_set_lock);
-+	set_hash = LIST_FIND(&ip_set_hash[key], ip_hash_cmp,
-+			     struct ip_set_hash *, id, ip);
-+	DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name,
-+	   HIPQUAD(ip),
-+	   set_hash != NULL ? ip_set_list[set_hash->binding]->name : "");
-+
-+	if (set_hash != NULL)
-+		__set_hash_del(set_hash);
-+	WRITE_UNLOCK(&ip_set_lock);
-+	return 0;
-+}
-+
-+static int 
-+ip_set_hash_add(ip_set_id_t id, ip_set_ip_t ip, ip_set_id_t binding)
-+{
-+	u_int32_t key = jhash_2words(id, ip, ip_set_hash_random)
-+				% ip_set_bindings_hash_size;
-+	struct ip_set_hash *set_hash;
-+	int ret = 0;
-+	
-+	IP_SET_ASSERT(ip_set_list[id]);
-+	IP_SET_ASSERT(ip_set_list[binding]);
-+	DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name, 
-+	   HIPQUAD(ip), ip_set_list[binding]->name);
-+	WRITE_LOCK(&ip_set_lock);
-+	set_hash = LIST_FIND(&ip_set_hash[key], ip_hash_cmp,
-+			     struct ip_set_hash *, id, ip);
-+	if (!set_hash) {
-+		set_hash = kmalloc(sizeof(struct ip_set_hash), GFP_KERNEL);
-+		if (!set_hash) {
-+			ret = -ENOMEM;
-+			goto unlock;
-+		}
-+		INIT_LIST_HEAD(&set_hash->list);
-+		set_hash->id = id;
-+		set_hash->ip = ip;
-+		list_add(&ip_set_hash[key], &set_hash->list);
-+	} else {
-+		IP_SET_ASSERT(ip_set_list[set_hash->binding]);	
-+		DP("overwrite binding: %s",
-+		   ip_set_list[set_hash->binding]->name);
-+		__ip_set_put(set_hash->binding);
-+	}
-+	set_hash->binding = binding;
-+	__ip_set_get(set_hash->binding);
-+    unlock:
-+	WRITE_UNLOCK(&ip_set_lock);
-+	return ret;
-+}
-+
-+#define FOREACH_HASH_DO(fn, args...) 						\
-+({										\
-+	ip_set_id_t __key;							\
-+	struct ip_set_hash *__set_hash;						\
-+										\
-+	for (__key = 0; __key < ip_set_bindings_hash_size; __key++) {		\
-+		list_for_each_entry(__set_hash, &ip_set_hash[__key], list)	\
-+			fn(__set_hash , ## args);				\
-+	}									\
-+})
-+
-+#define FOREACH_HASH_RW_DO(fn, args...) 						\
-+({										\
-+	ip_set_id_t __key;							\
-+	struct ip_set_hash *__set_hash, *__n;					\
-+										\
-+	MUST_BE_WRITE_LOCKED(&ip_set_lock);					\
-+	for (__key = 0; __key < ip_set_bindings_hash_size; __key++) {		\
-+		list_for_each_entry_safe(__set_hash, __n, &ip_set_hash[__key], list)\
-+			fn(__set_hash , ## args);				\
-+	}									\
-+})
-+
-+/* Add, del and test set entries from kernel */
-+
-+#define follow_bindings(index, set, ip)					\
-+((index = ip_set_find_in_hash((set)->id, ip)) != IP_SET_INVALID_ID	\
-+ || (index = (set)->binding) != IP_SET_INVALID_ID)
-+
-+int
-+ip_set_testip_kernel(ip_set_id_t index,
-+		     const struct sk_buff *skb,
-+		     const u_int32_t *flags)
-+{
-+	struct ip_set *set;
-+	ip_set_ip_t ip;
-+	int res, i = 0;
-+	
-+	IP_SET_ASSERT(flags[i]);
-+	READ_LOCK(&ip_set_lock);
-+	do {
-+		set = ip_set_list[index];
-+		IP_SET_ASSERT(set);
-+		DP("set %s, index %u", set->name, index);
-+		read_lock_bh(&set->lock);
-+		res = set->type->testip_kernel(set, skb, flags[i], &ip);
-+		read_unlock_bh(&set->lock);
-+	} while (res > 0 
-+		 && flags[++i] 
-+		 && follow_bindings(index, set, ip));
-+	READ_UNLOCK(&ip_set_lock);
-+
-+	return res;
-+}
-+
-+void
-+ip_set_addip_kernel(ip_set_id_t index,
-+		    const struct sk_buff *skb,
-+		    const u_int32_t *flags)
-+{
-+	struct ip_set *set;
-+	ip_set_ip_t ip;
-+	int res, i= 0;
-+
-+	IP_SET_ASSERT(flags[i]);
-+    retry:
-+	READ_LOCK(&ip_set_lock);
-+	do {
-+		set = ip_set_list[index];
-+		IP_SET_ASSERT(set);
-+		DP("set %s, index %u", set->name, index);
-+		write_lock_bh(&set->lock);
-+		res = set->type->addip_kernel(set, skb, flags[i], &ip);
-+		write_unlock_bh(&set->lock);
-+	} while ((res == 0 || res == -EEXIST)
-+		 && flags[++i] 
-+		 && follow_bindings(index, set, ip));
-+	READ_UNLOCK(&ip_set_lock);
-+	
-+	if (res == -EAGAIN
-+	    && set->type->retry
-+	    && (res = set->type->retry(set)) == 0)
-+	    	goto retry;
-+}
-+
-+void
-+ip_set_delip_kernel(ip_set_id_t index,
-+		    const struct sk_buff *skb,
-+		    const u_int32_t *flags)
-+{
-+	struct ip_set *set;
-+	ip_set_ip_t ip;
-+	int res, i = 0;
-+
-+	IP_SET_ASSERT(flags[i]);
-+	READ_LOCK(&ip_set_lock);
-+	do {
-+		set = ip_set_list[index];
-+		IP_SET_ASSERT(set);
-+		DP("set %s, index %u", set->name, index);
-+		write_lock_bh(&set->lock);
-+		res = set->type->delip_kernel(set, skb, flags[i], &ip);
-+		write_unlock_bh(&set->lock);
-+	} while ((res == 0 || res == -EEXIST)
-+		 && flags[++i] 
-+		 && follow_bindings(index, set, ip));
-+	READ_UNLOCK(&ip_set_lock);
-+}
-+
-+/* Register and deregister settype */
-+
-+static inline int
-+set_type_equal(const struct ip_set_type *set_type, const char *str2)
-+{
-+	return !strncmp(set_type->typename, str2, IP_SET_MAXNAMELEN - 1);
-+}
-+
-+static inline struct ip_set_type *
-+find_set_type(const char *name)
-+{
-+	return LIST_FIND(&set_type_list,
-+			 set_type_equal,
-+			 struct ip_set_type *,
-+			 name);
-+}
-+
-+int 
-+ip_set_register_set_type(struct ip_set_type *set_type)
-+{
-+	int ret = 0;
-+	
-+	if (set_type->protocol_version != IP_SET_PROTOCOL_VERSION) {
-+		ip_set_printk("'%s' uses wrong protocol version %u (want %u)",
-+			      set_type->typename,
-+			      set_type->protocol_version,
-+			      IP_SET_PROTOCOL_VERSION);
-+		return -EINVAL;
-+	}
-+
-+	WRITE_LOCK(&ip_set_lock);
-+	if (find_set_type(set_type->typename)) {
-+		/* Duplicate! */
-+		ip_set_printk("'%s' already registered!", 
-+			      set_type->typename);
-+		ret = -EINVAL;
-+		goto unlock;
-+	}
-+	__MOD_INC_SELF;
-+	list_append(&set_type_list, set_type);
-+	DP("'%s' registered.", set_type->typename);
-+   unlock:
-+	WRITE_UNLOCK(&ip_set_lock);
-+	return ret;
-+}
-+
-+void
-+ip_set_unregister_set_type(struct ip_set_type *set_type)
-+{
-+	WRITE_LOCK(&ip_set_lock);
-+	if (!find_set_type(set_type->typename)) {
-+		ip_set_printk("'%s' not registered?",
-+			      set_type->typename);
-+		goto unlock;
-+	}
-+	LIST_DELETE(&set_type_list, set_type);
-+	__MOD_DEC_SELF;
-+	DP("'%s' unregistered.", set_type->typename);
-+   unlock:
-+	WRITE_UNLOCK(&ip_set_lock);
-+
-+}
-+
-+/*
-+ * Userspace routines
-+ */
-+
-+/*
-+ * Find set by name, reference it once. The reference makes sure the
-+ * thing pointed to, does not go away under our feet. Drop the reference
-+ * later, using ip_set_put().
-+ */
-+ip_set_id_t
-+ip_set_get_byname(const char *name)
-+{
-+	ip_set_id_t i, index = IP_SET_INVALID_ID;
-+	
-+	down(&ip_set_app_mutex);
-+	for (i = 0; i < ip_set_max; i++) {
-+		if (ip_set_list[i] != NULL
-+		    && strcmp(ip_set_list[i]->name, name) == 0) {
-+			__ip_set_get(i);
-+			index = i;
-+			break;
-+		}
-+	}
-+	up(&ip_set_app_mutex);
-+	return index;
-+}
-+
-+/*
-+ * Find set by index, reference it once. The reference makes sure the
-+ * thing pointed to, does not go away under our feet. Drop the reference
-+ * later, using ip_set_put().
-+ */
-+ip_set_id_t
-+ip_set_get_byindex(ip_set_id_t index)
-+{
-+	down(&ip_set_app_mutex);
-+
-+	if (index >= ip_set_max)
-+		return IP_SET_INVALID_ID;
-+	
-+	if (ip_set_list[index])
-+		__ip_set_get(index);
-+	else
-+		index = IP_SET_INVALID_ID;
-+		
-+	up(&ip_set_app_mutex);
-+	return index;
-+}
-+
-+/*
-+ * If the given set pointer points to a valid set, decrement
-+ * reference count by 1. The caller shall not assume the index
-+ * to be valid, after calling this function.
-+ */
-+void ip_set_put(ip_set_id_t index)
-+{
-+	down(&ip_set_app_mutex);
-+	if (ip_set_list[index])
-+		__ip_set_put(index);
-+	up(&ip_set_app_mutex);
-+}
-+
-+/* Find a set by name or index */
-+static ip_set_id_t
-+ip_set_find_byname(const char *name)
-+{
-+	ip_set_id_t i, index = IP_SET_INVALID_ID;
-+	
-+	for (i = 0; i < ip_set_max; i++) {
-+		if (ip_set_list[i] != NULL
-+		    && strcmp(ip_set_list[i]->name, name) == 0) {
-+			index = i;
-+			break;
-+		}
-+	}
-+	return index;
-+}
-+
-+static ip_set_id_t
-+ip_set_find_byindex(ip_set_id_t index)
-+{
-+	if (index >= ip_set_max || ip_set_list[index] == NULL)
-+		index = IP_SET_INVALID_ID;
-+	
-+	return index;
-+}
-+
-+/*
-+ * Add, del, test, bind and unbind
-+ */
-+
-+static inline int
-+__ip_set_testip(struct ip_set *set,
-+	        const void *data,
-+	        size_t size,
-+	        ip_set_ip_t *ip)
-+{
-+	int res;
-+
-+	read_lock_bh(&set->lock);
-+	res = set->type->testip(set, data, size, ip);
-+	read_unlock_bh(&set->lock);
-+
-+	return res;
-+}
-+
-+static int
-+__ip_set_addip(ip_set_id_t index,
-+	       const void *data,
-+	       size_t size)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	ip_set_ip_t ip;
-+	int res;
-+	
-+	IP_SET_ASSERT(set);
-+	do {
-+		write_lock_bh(&set->lock);
-+		res = set->type->addip(set, data, size, &ip);
-+		write_unlock_bh(&set->lock);
-+	} while (res == -EAGAIN
-+		 && set->type->retry
-+		 && (res = set->type->retry(set)) == 0);
-+
-+	return res;
-+}
-+
-+static int
-+ip_set_addip(ip_set_id_t index,
-+	     const void *data,
-+	     size_t size)
-+{
-+
-+	return __ip_set_addip(index,
-+			      data + sizeof(struct ip_set_req_adt),
-+			      size - sizeof(struct ip_set_req_adt));
-+}
-+
-+static int
-+ip_set_delip(ip_set_id_t index,
-+	     const void *data,
-+	     size_t size)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	ip_set_ip_t ip;
-+	int res;
-+	
-+	IP_SET_ASSERT(set);
-+	write_lock_bh(&set->lock);
-+	res = set->type->delip(set,
-+			       data + sizeof(struct ip_set_req_adt),
-+			       size - sizeof(struct ip_set_req_adt),
-+			       &ip);
-+	write_unlock_bh(&set->lock);
-+
-+	return res;
-+}
-+
-+static int
-+ip_set_testip(ip_set_id_t index,
-+	      const void *data,
-+	      size_t size)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	ip_set_ip_t ip;
-+	int res;
-+
-+	IP_SET_ASSERT(set);
-+	res = __ip_set_testip(set,
-+			      data + sizeof(struct ip_set_req_adt),
-+			      size - sizeof(struct ip_set_req_adt),
-+			      &ip);
-+
-+	return (res > 0 ? -EEXIST : res);
-+}
-+
-+static int
-+ip_set_bindip(ip_set_id_t index,
-+	      const void *data,
-+	      size_t size)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	struct ip_set_req_bind *req_bind;
-+	ip_set_id_t binding;
-+	ip_set_ip_t ip;
-+	int res;
-+
-+	IP_SET_ASSERT(set);
-+	if (size < sizeof(struct ip_set_req_bind))
-+		return -EINVAL;
-+		
-+	req_bind = (struct ip_set_req_bind *) data;
-+	req_bind->binding[IP_SET_MAXNAMELEN - 1] = '\0';
-+
-+	if (strcmp(req_bind->binding, IPSET_TOKEN_DEFAULT) == 0) {
-+		/* Default binding of a set */
-+		char *binding_name;
-+		
-+		if (size != sizeof(struct ip_set_req_bind) + IP_SET_MAXNAMELEN)
-+			return -EINVAL;
-+
-+		binding_name = (char *)(data + sizeof(struct ip_set_req_bind));	
-+		binding_name[IP_SET_MAXNAMELEN - 1] = '\0';
-+
-+		binding = ip_set_find_byname(binding_name);
-+		if (binding == IP_SET_INVALID_ID)
-+			return -ENOENT;
-+
-+		WRITE_LOCK(&ip_set_lock);
-+		/* Sets as binding values are referenced */
-+		if (set->binding != IP_SET_INVALID_ID)
-+			__ip_set_put(set->binding);
-+		set->binding = binding;
-+		__ip_set_get(set->binding);
-+		WRITE_UNLOCK(&ip_set_lock);
-+
-+		return 0;
-+	}
-+	binding = ip_set_find_byname(req_bind->binding);
-+	if (binding == IP_SET_INVALID_ID)
-+		return -ENOENT;
-+
-+	res = __ip_set_testip(set,
-+			      data + sizeof(struct ip_set_req_bind),
-+			      size - sizeof(struct ip_set_req_bind),
-+			      &ip);
-+	DP("set %s, ip: %u.%u.%u.%u, binding %s",
-+	   set->name, HIPQUAD(ip), ip_set_list[binding]->name);
-+	
-+	if (res >= 0)
-+		res = ip_set_hash_add(set->id, ip, binding);
-+
-+	return res;
-+}
-+
-+#define FOREACH_SET_DO(fn, args...) 				\
-+({								\
-+	ip_set_id_t __i;					\
-+	struct ip_set *__set;					\
-+								\
-+	for (__i = 0; __i < ip_set_max; __i++) {		\
-+		__set = ip_set_list[__i];			\
-+		if (__set != NULL)				\
-+			fn(__set , ##args);			\
-+	}							\
-+})
-+
-+static inline void
-+__set_hash_del_byid(struct ip_set_hash *set_hash, ip_set_id_t id)
-+{
-+	if (set_hash->id == id)
-+		__set_hash_del(set_hash);
-+}
-+
-+static inline void
-+__unbind_default(struct ip_set *set)
-+{
-+	if (set->binding != IP_SET_INVALID_ID) {
-+		/* Sets as binding values are referenced */
-+		__ip_set_put(set->binding);
-+		set->binding = IP_SET_INVALID_ID;
-+	}
-+}
-+
-+static int
-+ip_set_unbindip(ip_set_id_t index,
-+	        const void *data,
-+	        size_t size)
-+{
-+	struct ip_set *set;
-+	struct ip_set_req_bind *req_bind;
-+	ip_set_ip_t ip;
-+	int res;
-+
-+	DP("");
-+	if (size < sizeof(struct ip_set_req_bind))
-+		return -EINVAL;
-+		
-+	req_bind = (struct ip_set_req_bind *) data;
-+	req_bind->binding[IP_SET_MAXNAMELEN - 1] = '\0';
-+	
-+	DP("%u %s", index, req_bind->binding);
-+	if (index == IP_SET_INVALID_ID) {
-+		/* unbind :all: */
-+		if (strcmp(req_bind->binding, IPSET_TOKEN_DEFAULT) == 0) {
-+			/* Default binding of sets */
-+			WRITE_LOCK(&ip_set_lock);
-+			FOREACH_SET_DO(__unbind_default);
-+			WRITE_UNLOCK(&ip_set_lock);
-+			return 0;
-+		} else if (strcmp(req_bind->binding, IPSET_TOKEN_ALL) == 0) {
-+			/* Flush all bindings of all sets*/
-+			WRITE_LOCK(&ip_set_lock);
-+			FOREACH_HASH_RW_DO(__set_hash_del);
-+			WRITE_UNLOCK(&ip_set_lock);
-+			return 0;
-+		}
-+		DP("unreachable reached!");
-+		return -EINVAL;
-+	}
-+	
-+	set = ip_set_list[index];
-+	IP_SET_ASSERT(set);
-+	if (strcmp(req_bind->binding, IPSET_TOKEN_DEFAULT) == 0) {
-+		/* Default binding of set */
-+		ip_set_id_t binding = ip_set_find_byindex(set->binding);
-+
-+		if (binding == IP_SET_INVALID_ID)
-+			return -ENOENT;
-+			
-+		WRITE_LOCK(&ip_set_lock);
-+		/* Sets in hash values are referenced */
-+		__ip_set_put(set->binding);
-+		set->binding = IP_SET_INVALID_ID;
-+		WRITE_UNLOCK(&ip_set_lock);
-+
-+		return 0;
-+	} else if (strcmp(req_bind->binding, IPSET_TOKEN_ALL) == 0) {
-+		/* Flush all bindings */
-+
-+		WRITE_LOCK(&ip_set_lock);
-+		FOREACH_HASH_RW_DO(__set_hash_del_byid, set->id);
-+		WRITE_UNLOCK(&ip_set_lock);
-+		return 0;
-+	}
-+	
-+	res = __ip_set_testip(set,
-+			      data + sizeof(struct ip_set_req_bind),
-+			      size - sizeof(struct ip_set_req_bind),
-+			      &ip);
-+
-+	DP("set %s, ip: %u.%u.%u.%u", set->name, HIPQUAD(ip));
-+	if (res >= 0)
-+		res = ip_set_hash_del(set->id, ip);
-+
-+	return res;
-+}
-+
-+static int
-+ip_set_testbind(ip_set_id_t index,
-+	        const void *data,
-+	        size_t size)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	struct ip_set_req_bind *req_bind;
-+	ip_set_id_t binding;
-+	ip_set_ip_t ip;
-+	int res;
-+
-+	IP_SET_ASSERT(set);
-+	if (size < sizeof(struct ip_set_req_bind))
-+		return -EINVAL;
-+		
-+	req_bind = (struct ip_set_req_bind *) data;
-+	req_bind->binding[IP_SET_MAXNAMELEN - 1] = '\0';
-+
-+	if (strcmp(req_bind->binding, IPSET_TOKEN_DEFAULT) == 0) {
-+		/* Default binding of set */
-+		char *binding_name;
-+		
-+		if (size != sizeof(struct ip_set_req_bind) + IP_SET_MAXNAMELEN)
-+			return -EINVAL;
-+
-+		binding_name = (char *)(data + sizeof(struct ip_set_req_bind));	
-+		binding_name[IP_SET_MAXNAMELEN - 1] = '\0';
-+
-+		binding = ip_set_find_byname(binding_name);
-+		if (binding == IP_SET_INVALID_ID)
-+			return -ENOENT;
-+		
-+		res = (set->binding == binding) ? -EEXIST : 0;
-+
-+		return res;
-+	}
-+	binding = ip_set_find_byname(req_bind->binding);
-+	if (binding == IP_SET_INVALID_ID)
-+		return -ENOENT;
-+		
-+	
-+	res = __ip_set_testip(set,
-+			      data + sizeof(struct ip_set_req_bind),
-+			      size - sizeof(struct ip_set_req_bind),
-+			      &ip);
-+	DP("set %s, ip: %u.%u.%u.%u, binding %s",
-+	   set->name, HIPQUAD(ip), ip_set_list[binding]->name);
-+	
-+	if (res >= 0)
-+		res = (ip_set_find_in_hash(set->id, ip) == binding)
-+			? -EEXIST : 0;
-+
-+	return res;
-+}
-+
-+static struct ip_set_type *
-+find_set_type_rlock(const char *typename)
-+{
-+	struct ip_set_type *type;
-+	
-+	READ_LOCK(&ip_set_lock);
-+	type = find_set_type(typename);
-+	if (type == NULL)
-+		READ_UNLOCK(&ip_set_lock);
-+
-+	return type;
-+}
-+
-+static int
-+find_free_id(const char *name,
-+	     ip_set_id_t *index,
-+	     ip_set_id_t *id)
-+{
-+	ip_set_id_t i;
-+
-+	*id = IP_SET_INVALID_ID;
-+	for (i = 0;  i < ip_set_max; i++) {
-+		if (ip_set_list[i] == NULL) {
-+			if (*id == IP_SET_INVALID_ID)
-+				*id = *index = i;
-+		} else if (strcmp(name, ip_set_list[i]->name) == 0)
-+			/* Name clash */
-+			return -EEXIST;
-+	}
-+	if (*id == IP_SET_INVALID_ID)
-+		/* No free slot remained */
-+		return -ERANGE;
-+	/* Check that index is usable as id (swapping) */
-+    check:	
-+	for (i = 0;  i < ip_set_max; i++) {
-+		if (ip_set_list[i] != NULL
-+		    && ip_set_list[i]->id == *id) {
-+		    *id = i;
-+		    goto check;
-+		}
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * Create a set
-+ */
-+static int
-+ip_set_create(const char *name,
-+	      const char *typename,
-+	      ip_set_id_t restore,
-+	      const void *data,
-+	      size_t size)
-+{
-+	struct ip_set *set;
-+	ip_set_id_t index, id;
-+	int res = 0;
-+
-+	DP("setname: %s, typename: %s, id: %u", name, typename, restore);
-+	/*
-+	 * First, and without any locks, allocate and initialize
-+	 * a normal base set structure.
-+	 */
-+	set = kmalloc(sizeof(struct ip_set), GFP_KERNEL);
-+	if (!set)
-+		return -ENOMEM;
-+	set->lock = RW_LOCK_UNLOCKED;
-+	strncpy(set->name, name, IP_SET_MAXNAMELEN);
-+	set->binding = IP_SET_INVALID_ID;
-+	atomic_set(&set->ref, 0);
-+
-+	/*
-+	 * Next, take the &ip_set_lock, check that we know the type,
-+	 * and take a reference on the type, to make sure it
-+	 * stays available while constructing our new set.
-+	 *
-+	 * After referencing the type, we drop the &ip_set_lock,
-+	 * and let the new set construction run without locks.
-+	 */
-+	set->type = find_set_type_rlock(typename);
-+	if (set->type == NULL) {
-+		/* Try loading the module */
-+		char modulename[IP_SET_MAXNAMELEN + strlen("ip_set_") + 1];
-+		strcpy(modulename, "ip_set_");
-+		strcat(modulename, typename);
-+		DP("try to load %s", modulename);
-+		request_module(modulename);
-+		set->type = find_set_type_rlock(typename);
-+	}
-+	if (set->type == NULL) {
-+		ip_set_printk("no set type '%s', set '%s' not created",
-+			      typename, name);
-+		kfree(set);
-+		return -ENOENT;
-+	}
-+	__MOD_INC(set->type->me);
-+	READ_UNLOCK(&ip_set_lock);
-+
-+	/*
-+	 * Without holding any locks, create private part.
-+	 */
-+	res = set->type->create(set, data, size);
-+	if (res != 0) {
-+		__MOD_DEC(set->type->me);
-+		kfree(set);
-+		return res;
-+	}
-+
-+	/* BTW, res==0 here. */
-+
-+	/*
-+	 * Here, we have a valid, constructed set. &ip_set_lock again,
-+	 * find free id/index and check that it is not already in 
-+	 * ip_set_list.
-+	 */
-+	WRITE_LOCK(&ip_set_lock);
-+	if ((res = find_free_id(set->name, &index, &id)) != 0) {
-+		DP("no free id!");
-+		goto cleanup;
-+	}
-+
-+	/* Make sure restore gets the same index */
-+	if (restore != IP_SET_INVALID_ID && index != restore) {
-+		DP("Can't restore, sets are screwed up");
-+		res = -ERANGE;
-+		goto cleanup;
-+	}
-+	 
-+	/*
-+	 * Finally! Add our shiny new set to the list, and be done.
-+	 */
-+	DP("create: '%s' created with index %u, id %u!", set->name, index, id);
-+	set->id = id;
-+	ip_set_list[index] = set;
-+	WRITE_UNLOCK(&ip_set_lock);
-+	return res;
-+	
-+    cleanup:
-+	WRITE_UNLOCK(&ip_set_lock);
-+	set->type->destroy(set);
-+	__MOD_DEC(set->type->me);
-+	kfree(set);
-+	return res;
-+}
-+
-+/*
-+ * Destroy a given existing set
-+ */
-+static void
-+ip_set_destroy_set(ip_set_id_t index)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+
-+	IP_SET_ASSERT(set);
-+	DP("set: %s",  set->name);
-+	WRITE_LOCK(&ip_set_lock);
-+	FOREACH_HASH_RW_DO(__set_hash_del_byid, set->id);
-+	if (set->binding != IP_SET_INVALID_ID)
-+		__ip_set_put(set->binding);
-+	ip_set_list[index] = NULL;
-+	WRITE_UNLOCK(&ip_set_lock);
-+
-+	/* Must call it without holding any lock */
-+	set->type->destroy(set);
-+	__MOD_DEC(set->type->me);
-+	kfree(set);
-+}
-+
-+/*
-+ * Destroy a set - or all sets
-+ * Sets must not be referenced/used.
-+ */
-+static int
-+ip_set_destroy(ip_set_id_t index)
-+{
-+	ip_set_id_t i;
-+
-+	/* ref modification always protected by the mutex */
-+	if (index != IP_SET_INVALID_ID) {
-+		if (atomic_read(&ip_set_list[index]->ref))
-+			return -EBUSY;
-+		ip_set_destroy_set(index);
-+	} else {
-+		for (i = 0; i < ip_set_max; i++) {
-+			if (ip_set_list[i] != NULL 
-+			    && (atomic_read(&ip_set_list[i]->ref)))
-+			    	return -EBUSY;
-+		}
-+
-+		for (i = 0; i < ip_set_max; i++) {
-+			if (ip_set_list[i] != NULL)
-+				ip_set_destroy_set(i);
-+		}
-+	}
-+	return 0;
-+}
-+
-+static void
-+ip_set_flush_set(struct ip_set *set)
-+{
-+	DP("set: %s %u",  set->name, set->id);
-+
-+	write_lock_bh(&set->lock);
-+	set->type->flush(set);
-+	write_unlock_bh(&set->lock);
-+}
-+
-+/* 
-+ * Flush data in a set - or in all sets
-+ */
-+static int
-+ip_set_flush(ip_set_id_t index)
-+{
-+	if (index != IP_SET_INVALID_ID) {
-+		IP_SET_ASSERT(ip_set_list[index]);
-+		ip_set_flush_set(ip_set_list[index]);
-+	} else
-+		FOREACH_SET_DO(ip_set_flush_set);
-+
-+	return 0;
-+}
-+
-+/* Rename a set */
-+static int
-+ip_set_rename(ip_set_id_t index, const char *name)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	ip_set_id_t i;
-+	int res = 0;
-+
-+	DP("set: %s to %s",  set->name, name);
-+	WRITE_LOCK(&ip_set_lock);
-+	for (i = 0; i < ip_set_max; i++) {
-+		if (ip_set_list[i] != NULL
-+		    && strncmp(ip_set_list[i]->name, 
-+			       name,
-+			       IP_SET_MAXNAMELEN - 1) == 0) {
-+			res = -EEXIST;
-+			goto unlock;
-+		}
-+	}
-+	strncpy(set->name, name, IP_SET_MAXNAMELEN);
-+    unlock:
-+	WRITE_UNLOCK(&ip_set_lock);
-+	return res;
-+}
-+
-+/*
-+ * Swap two sets so that name/index points to the other.
-+ * References are also swapped.
-+ */
-+static int
-+ip_set_swap(ip_set_id_t from_index, ip_set_id_t to_index)
-+{
-+	struct ip_set *from = ip_set_list[from_index];
-+	struct ip_set *to = ip_set_list[to_index];
-+	char from_name[IP_SET_MAXNAMELEN];
-+	u_int32_t from_ref;
-+
-+	DP("set: %s to %s",  from->name, to->name);
-+	/* Type can't be changed. Artifical restriction. */
-+	if (from->type->typecode != to->type->typecode)
-+		return -ENOEXEC;
-+
-+	/* No magic here: ref munging protected by the mutex */	
-+	WRITE_LOCK(&ip_set_lock);
-+	strncpy(from_name, from->name, IP_SET_MAXNAMELEN);
-+	from_ref = atomic_read(&from->ref);
-+
-+	strncpy(from->name, to->name, IP_SET_MAXNAMELEN);
-+	atomic_set(&from->ref, atomic_read(&to->ref));
-+	strncpy(to->name, from_name, IP_SET_MAXNAMELEN);
-+	atomic_set(&to->ref, from_ref);
-+	
-+	ip_set_list[from_index] = to;
-+	ip_set_list[to_index] = from;
-+	
-+	WRITE_UNLOCK(&ip_set_lock);
-+	return 0;
-+}
-+
-+/*
-+ * List set data
-+ */
-+
-+static inline void
-+__set_hash_bindings_size_list(struct ip_set_hash *set_hash,
-+			      ip_set_id_t id, size_t *size)
-+{
-+	if (set_hash->id == id)
-+		*size += sizeof(struct ip_set_hash_list);
-+}
-+
-+static inline void
-+__set_hash_bindings_size_save(struct ip_set_hash *set_hash,
-+			      ip_set_id_t id, size_t *size)
-+{
-+	if (set_hash->id == id)
-+		*size += sizeof(struct ip_set_hash_save);
-+}
-+
-+static inline void
-+__set_hash_bindings(struct ip_set_hash *set_hash,
-+		    ip_set_id_t id, void *data, int *used)
-+{
-+	if (set_hash->id == id) {
-+		struct ip_set_hash_list *hash_list = 
-+			(struct ip_set_hash_list *)(data + *used);
-+
-+		hash_list->ip = set_hash->ip;
-+		hash_list->binding = set_hash->binding;
-+		*used += sizeof(struct ip_set_hash_list);
-+	}
-+}
-+
-+static int ip_set_list_set(ip_set_id_t index,
-+			   void *data,
-+			   int *used,
-+			   int len)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	struct ip_set_list *set_list;
-+
-+	/* Pointer to our header */
-+	set_list = (struct ip_set_list *) (data + *used);
-+
-+	DP("set: %s, used: %d %p %p", set->name, *used, data, data + *used);
-+
-+	/* Get and ensure header size */
-+	if (*used + sizeof(struct ip_set_list) > len)
-+		goto not_enough_mem;
-+	*used += sizeof(struct ip_set_list);
-+
-+	read_lock_bh(&set->lock);
-+	/* Get and ensure set specific header size */
-+	set_list->header_size = set->type->header_size;
-+	if (*used + set_list->header_size > len)
-+		goto unlock_set;
-+
-+	/* Fill in the header */
-+	set_list->index = index;
-+	set_list->binding = set->binding;
-+	set_list->ref = atomic_read(&set->ref);
-+
-+	/* Fill in set spefific header data */
-+	DP("call list_header");
-+	set->type->list_header(set, data + *used);
-+	DP("call list_header, done");
-+	*used += set_list->header_size;
-+
-+	/* Get and ensure set specific members size */
-+	DP("call list_members_size");
-+	set_list->members_size = set->type->list_members_size(set);
-+	DP("call list_members_size, done");
-+	if (*used + set_list->members_size > len)
-+		goto unlock_set;
-+
-+	/* Fill in set spefific members data */
-+	DP("call list_members");
-+	set->type->list_members(set, data + *used);
-+	DP("call list_members, done");
-+	*used += set_list->members_size;
-+	read_unlock_bh(&set->lock);
-+
-+	/* Bindings */
-+
-+	/* Get and ensure set specific bindings size */
-+	set_list->bindings_size = 0;
-+	FOREACH_HASH_DO(__set_hash_bindings_size_list,
-+			set->id, &set_list->bindings_size);
-+	if (*used + set_list->bindings_size > len)
-+		goto not_enough_mem;
-+
-+	/* Fill in set spefific bindings data */
-+	FOREACH_HASH_DO(__set_hash_bindings, set->id, data, used);
-+	
-+	return 0;
-+
-+    unlock_set:
-+	read_unlock_bh(&set->lock);
-+    not_enough_mem:
-+	DP("not enough mem, try again");
-+	return -EAGAIN;
-+}
-+
-+/*
-+ * Save sets
-+ */
-+static int ip_set_save_set(ip_set_id_t index,
-+			   void *data,
-+			   int *used,
-+			   int len)
-+{
-+	struct ip_set *set;
-+	struct ip_set_save *set_save;
-+
-+	/* Pointer to our header */
-+	set_save = (struct ip_set_save *) (data + *used);
-+
-+	/* Get and ensure header size */
-+	if (*used + sizeof(struct ip_set_save) > len)
-+		goto not_enough_mem;
-+	*used += sizeof(struct ip_set_save);
-+
-+	set = ip_set_list[index];
-+	DP("set: %s, used: %u(%u) %p %p", set->name, *used, len, 
-+	   data, data + *used);
-+
-+	read_lock_bh(&set->lock);
-+	/* Get and ensure set specific header size */
-+	set_save->header_size = set->type->header_size;
-+	if (*used + set_save->header_size > len)
-+		goto unlock_set;
-+
-+	/* Fill in the header */
-+	set_save->index = index;
-+	set_save->binding = set->binding;
-+
-+	/* Fill in set spefific header data */
-+	set->type->list_header(set, data + *used);
-+	*used += set_save->header_size;
-+
-+	DP("set header filled: %s, used: %u %p %p", set->name, *used,
-+	   data, data + *used);
-+	/* Get and ensure set specific members size */
-+	set_save->members_size = set->type->list_members_size(set);
-+	if (*used + set_save->members_size > len)
-+		goto unlock_set;
-+
-+	/* Fill in set spefific members data */
-+	set->type->list_members(set, data + *used);
-+	*used += set_save->members_size;
-+	read_unlock_bh(&set->lock);
-+	DP("set members filled: %s, used: %u %p %p", set->name, *used,
-+	   data, data + *used);
-+	return 0;
-+
-+    unlock_set:
-+	read_unlock_bh(&set->lock);
-+    not_enough_mem:
-+	DP("not enough mem, try again");
-+	return -EAGAIN;
-+}
-+
-+static inline void
-+__set_hash_save_bindings(struct ip_set_hash *set_hash,
-+			 ip_set_id_t id,
-+			 void *data,
-+			 int *used,
-+			 int len,
-+			 int *res)
-+{
-+	if (*res == 0
-+	    && (id == IP_SET_INVALID_ID || set_hash->id == id)) {
-+		struct ip_set_hash_save *hash_save = 
-+			(struct ip_set_hash_save *)(data + *used);
-+		/* Ensure bindings size */
-+		if (*used + sizeof(struct ip_set_hash_save) > len) {
-+			*res = -ENOMEM;
-+			return;
-+		}
-+		hash_save->id = set_hash->id;
-+		hash_save->ip = set_hash->ip;
-+		hash_save->binding = set_hash->binding;
-+		*used += sizeof(struct ip_set_hash_save);
-+	}
-+}
-+
-+static int ip_set_save_bindings(ip_set_id_t index,
-+			   	void *data,
-+			   	int *used,
-+			   	int len)
-+{
-+	int res = 0;
-+	struct ip_set_save *set_save;
-+
-+	DP("used %u, len %u", *used, len);
-+	/* Get and ensure header size */
-+	if (*used + sizeof(struct ip_set_save) > len)
-+		return -ENOMEM;
-+
-+	/* Marker */
-+	set_save = (struct ip_set_save *) (data + *used);
-+	set_save->index = IP_SET_INVALID_ID;
-+	*used += sizeof(struct ip_set_save);
-+
-+	DP("marker added used %u, len %u", *used, len);
-+	/* Fill in bindings data */
-+	if (index != IP_SET_INVALID_ID)
-+		/* Sets are identified by id in hash */
-+		index = ip_set_list[index]->id;
-+	FOREACH_HASH_DO(__set_hash_save_bindings, index, data, used, len, &res);
-+
-+	return res;	
-+}
-+
-+/*
-+ * Restore sets
-+ */
-+static int ip_set_restore(void *data,
-+			  int len)
-+{
-+	int res = 0;
-+	int line = 0, used = 0, members_size;
-+	struct ip_set *set;
-+	struct ip_set_hash_save *hash_save;
-+	struct ip_set_restore *set_restore;
-+	ip_set_id_t index;
-+
-+	/* Loop to restore sets */
-+	while (1) {
-+		line++;
-+		
-+		DP("%u %u %u", used, sizeof(struct ip_set_restore), len);
-+		/* Get and ensure header size */
-+		if (used + sizeof(struct ip_set_restore) > len)
-+			return line;
-+		set_restore = (struct ip_set_restore *) (data + used);
-+		used += sizeof(struct ip_set_restore);
-+
-+		/* Ensure data size */
-+		if (used 
-+		    + set_restore->header_size 
-+		    + set_restore->members_size > len)
-+			return line;
-+
-+		/* Check marker */
-+		if (set_restore->index == IP_SET_INVALID_ID) {
-+			line--;
-+			goto bindings;
-+		}
-+		
-+		/* Try to create the set */
-+		DP("restore %s %s", set_restore->name, set_restore->typename);
-+		res = ip_set_create(set_restore->name,
-+				    set_restore->typename,
-+				    set_restore->index,
-+				    data + used,
-+				    set_restore->header_size);
-+		
-+		if (res != 0)
-+			return line;
-+		used += set_restore->header_size;
-+
-+		index = ip_set_find_byindex(set_restore->index);
-+		DP("index %u, restore_index %u", index, set_restore->index);
-+		if (index != set_restore->index)
-+			return line;
-+		/* Try to restore members data */
-+		set = ip_set_list[index];
-+		members_size = 0;
-+		DP("members_size %u reqsize %u",
-+		   set_restore->members_size, set->type->reqsize);
-+		while (members_size + set->type->reqsize <=
-+		       set_restore->members_size) {
-+			line++;
-+		       	DP("members: %u, line %u", members_size, line);
-+			res = __ip_set_addip(index,
-+					   data + used + members_size,
-+					   set->type->reqsize);
-+			if (!(res == 0 || res == -EEXIST))
-+				return line;
-+			members_size += set->type->reqsize;
-+		}
-+
-+		DP("members_size %u  %u",
-+		   set_restore->members_size, members_size);
-+		if (members_size != set_restore->members_size)
-+			return line++;
-+		used += set_restore->members_size;		
-+	}
-+	
-+   bindings:
-+   	/* Loop to restore bindings */
-+   	while (used < len) {
-+		line++;
-+
-+		DP("restore binding, line %u", line);		
-+		/* Get and ensure size */
-+		if (used + sizeof(struct ip_set_hash_save) > len)
-+			return line;
-+		hash_save = (struct ip_set_hash_save *) (data + used);
-+		used += sizeof(struct ip_set_hash_save);
-+		
-+		/* hash_save->id is used to store the index */
-+		index = ip_set_find_byindex(hash_save->id);
-+		DP("restore binding index %u, id %u, %u -> %u",
-+		   index, hash_save->id, hash_save->ip, hash_save->binding);		
-+		if (index != hash_save->id)
-+			return line;
-+			
-+		set = ip_set_list[hash_save->id];
-+		/* Null valued IP means default binding */
-+		if (hash_save->ip)
-+			res = ip_set_hash_add(set->id, 
-+					      hash_save->ip,
-+					      hash_save->binding);
-+		else {
-+			IP_SET_ASSERT(set->binding == IP_SET_INVALID_ID);
-+			WRITE_LOCK(&ip_set_lock);
-+			set->binding = hash_save->binding;
-+			__ip_set_get(set->binding);
-+			WRITE_UNLOCK(&ip_set_lock);
-+			DP("default binding: %u", set->binding);
-+		}
-+		if (res != 0)
-+			return line;
-+   	}
-+   	if (used != len)
-+   		return line;
-+   	
-+	return 0;	
-+}
-+
-+static int
-+ip_set_sockfn_set(struct sock *sk, int optval, void *user, unsigned int len)
-+{
-+	void *data;
-+	int res = 0;		/* Assume OK */
-+	unsigned *op;
-+	struct ip_set_req_adt *req_adt;
-+	ip_set_id_t index = IP_SET_INVALID_ID;
-+	int (*adtfn)(ip_set_id_t index,
-+		     const void *data, size_t size);
-+	struct fn_table {
-+		int (*fn)(ip_set_id_t index,
-+			  const void *data, size_t size);
-+	} adtfn_table[] =
-+	{ { ip_set_addip }, { ip_set_delip }, { ip_set_testip},
-+	  { ip_set_bindip}, { ip_set_unbindip }, { ip_set_testbind },
-+	};
-+
-+	DP("optval=%d, user=%p, len=%d", optval, user, len);
-+	if (!capable(CAP_NET_ADMIN))
-+		return -EPERM;
-+	if (optval != SO_IP_SET)
-+		return -EBADF;
-+	if (len <= sizeof(unsigned)) {
-+		ip_set_printk("short userdata (want >%zu, got %u)",
-+			      sizeof(unsigned), len);
-+		return -EINVAL;
-+	}
-+	data = vmalloc(len);
-+	if (!data) {
-+		DP("out of mem for %u bytes", len);
-+		return -ENOMEM;
-+	}
-+	if (copy_from_user(data, user, len) != 0) {
-+		res = -EFAULT;
-+		goto done;
-+	}
-+	if (down_interruptible(&ip_set_app_mutex)) {
-+		res = -EINTR;
-+		goto done;
-+	}
-+
-+	op = (unsigned *)data;
-+	DP("op=%x", *op);
-+	
-+	if (*op < IP_SET_OP_VERSION) {
-+		/* Check the version at the beginning of operations */
-+		struct ip_set_req_version *req_version =
-+			(struct ip_set_req_version *) data;
-+		if (req_version->version != IP_SET_PROTOCOL_VERSION) {
-+			res = -EPROTO;
-+			goto done;
-+		}
-+	}
-+
-+	switch (*op) {
-+	case IP_SET_OP_CREATE:{
-+		struct ip_set_req_create *req_create
-+			= (struct ip_set_req_create *) data;
-+		
-+		if (len <= sizeof(struct ip_set_req_create)) {
-+			ip_set_printk("short CREATE data (want >%zu, got %u)",
-+				      sizeof(struct ip_set_req_create), len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		req_create->name[IP_SET_MAXNAMELEN - 1] = '\0';
-+		req_create->typename[IP_SET_MAXNAMELEN - 1] = '\0';
-+		res = ip_set_create(req_create->name,
-+				    req_create->typename,
-+				    IP_SET_INVALID_ID,
-+				    data + sizeof(struct ip_set_req_create),
-+				    len - sizeof(struct ip_set_req_create));
-+		goto done;
-+	}
-+	case IP_SET_OP_DESTROY:{
-+		struct ip_set_req_std *req_destroy
-+			= (struct ip_set_req_std *) data;
-+		
-+		if (len != sizeof(struct ip_set_req_std)) {
-+			ip_set_printk("invalid DESTROY data (want %zu, got %u)",
-+				      sizeof(struct ip_set_req_std), len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		if (strcmp(req_destroy->name, IPSET_TOKEN_ALL) == 0) {
-+			/* Destroy all sets */
-+			index = IP_SET_INVALID_ID;
-+		} else {
-+			req_destroy->name[IP_SET_MAXNAMELEN - 1] = '\0';
-+			index = ip_set_find_byname(req_destroy->name);
-+
-+			if (index == IP_SET_INVALID_ID) {
-+				res = -ENOENT;
-+				goto done;
-+			}
-+		}
-+			
-+		res = ip_set_destroy(index);
-+		goto done;
-+	}
-+	case IP_SET_OP_FLUSH:{
-+		struct ip_set_req_std *req_flush =
-+			(struct ip_set_req_std *) data;
-+
-+		if (len != sizeof(struct ip_set_req_std)) {
-+			ip_set_printk("invalid FLUSH data (want %zu, got %u)",
-+				      sizeof(struct ip_set_req_std), len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		if (strcmp(req_flush->name, IPSET_TOKEN_ALL) == 0) {
-+			/* Flush all sets */
-+			index = IP_SET_INVALID_ID;
-+		} else {
-+			req_flush->name[IP_SET_MAXNAMELEN - 1] = '\0';
-+			index = ip_set_find_byname(req_flush->name);
-+
-+			if (index == IP_SET_INVALID_ID) {
-+				res = -ENOENT;
-+				goto done;
-+			}
-+		}
-+		res = ip_set_flush(index);
-+		goto done;
-+	}
-+	case IP_SET_OP_RENAME:{
-+		struct ip_set_req_create *req_rename
-+			= (struct ip_set_req_create *) data;
-+
-+		if (len != sizeof(struct ip_set_req_create)) {
-+			ip_set_printk("invalid RENAME data (want %zu, got %u)",
-+				      sizeof(struct ip_set_req_create), len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+
-+		req_rename->name[IP_SET_MAXNAMELEN - 1] = '\0';
-+		req_rename->typename[IP_SET_MAXNAMELEN - 1] = '\0';
-+			
-+		index = ip_set_find_byname(req_rename->name);
-+		if (index == IP_SET_INVALID_ID) {
-+			res = -ENOENT;
-+			goto done;
-+		}
-+		res = ip_set_rename(index, req_rename->typename);
-+		goto done;
-+	}
-+	case IP_SET_OP_SWAP:{
-+		struct ip_set_req_create *req_swap
-+			= (struct ip_set_req_create *) data;
-+		ip_set_id_t to_index;
-+
-+		if (len != sizeof(struct ip_set_req_create)) {
-+			ip_set_printk("invalid SWAP data (want %zu, got %u)",
-+				      sizeof(struct ip_set_req_create), len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+
-+		req_swap->name[IP_SET_MAXNAMELEN - 1] = '\0';
-+		req_swap->typename[IP_SET_MAXNAMELEN - 1] = '\0';
-+
-+		index = ip_set_find_byname(req_swap->name);
-+		if (index == IP_SET_INVALID_ID) {
-+			res = -ENOENT;
-+			goto done;
-+		}
-+		to_index = ip_set_find_byname(req_swap->typename);
-+		if (to_index == IP_SET_INVALID_ID) {
-+			res = -ENOENT;
-+			goto done;
-+		}
-+		res = ip_set_swap(index, to_index);
-+		goto done;
-+	}
-+	default: 
-+		break;	/* Set identified by id */
-+	}
-+	
-+	/* There we may have add/del/test/bind/unbind/test_bind operations */
-+	if (*op < IP_SET_OP_ADD_IP || *op > IP_SET_OP_TEST_BIND_SET) {
-+		res = -EBADMSG;
-+		goto done;
-+	}
-+	adtfn = adtfn_table[*op - IP_SET_OP_ADD_IP].fn;
-+
-+	if (len < sizeof(struct ip_set_req_adt)) {
-+		ip_set_printk("short data in adt request (want >=%zu, got %u)",
-+			      sizeof(struct ip_set_req_adt), len);
-+		res = -EINVAL;
-+		goto done;
-+	}
-+	req_adt = (struct ip_set_req_adt *) data;
-+
-+	/* -U :all: :all:|:default: uses IP_SET_INVALID_ID */
-+	if (!(*op == IP_SET_OP_UNBIND_SET 
-+	      && req_adt->index == IP_SET_INVALID_ID)) {
-+		index = ip_set_find_byindex(req_adt->index);
-+		if (index == IP_SET_INVALID_ID) {
-+			res = -ENOENT;
-+			goto done;
-+		}
-+	}
-+	res = adtfn(index, data, len);
-+
-+    done:
-+	up(&ip_set_app_mutex);
-+	vfree(data);
-+	if (res > 0)
-+		res = 0;
-+	DP("final result %d", res);
-+	return res;
-+}
-+
-+static int 
-+ip_set_sockfn_get(struct sock *sk, int optval, void *user, int *len)
-+{
-+	int res = 0;
-+	unsigned *op;
-+	ip_set_id_t index = IP_SET_INVALID_ID;
-+	void *data;
-+	int copylen = *len;
-+
-+	DP("optval=%d, user=%p, len=%d", optval, user, *len);
-+	if (!capable(CAP_NET_ADMIN))
-+		return -EPERM;
-+	if (optval != SO_IP_SET)
-+		return -EBADF;
-+	if (*len < sizeof(unsigned)) {
-+		ip_set_printk("short userdata (want >=%zu, got %d)",
-+			      sizeof(unsigned), *len);
-+		return -EINVAL;
-+	}
-+	data = vmalloc(*len);
-+	if (!data) {
-+		DP("out of mem for %d bytes", *len);
-+		return -ENOMEM;
-+	}
-+	if (copy_from_user(data, user, *len) != 0) {
-+		res = -EFAULT;
-+		goto done;
-+	}
-+	if (down_interruptible(&ip_set_app_mutex)) {
-+		res = -EINTR;
-+		goto done;
-+	}
-+
-+	op = (unsigned *) data;
-+	DP("op=%x", *op);
-+
-+	if (*op < IP_SET_OP_VERSION) {
-+		/* Check the version at the beginning of operations */
-+		struct ip_set_req_version *req_version =
-+			(struct ip_set_req_version *) data;
-+		if (req_version->version != IP_SET_PROTOCOL_VERSION) {
-+			res = -EPROTO;
-+			goto done;
-+		}
-+	}
-+
-+	switch (*op) {
-+	case IP_SET_OP_VERSION: {
-+		struct ip_set_req_version *req_version =
-+		    (struct ip_set_req_version *) data;
-+
-+		if (*len != sizeof(struct ip_set_req_version)) {
-+			ip_set_printk("invalid VERSION (want %zu, got %d)",
-+				      sizeof(struct ip_set_req_version),
-+				      *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+
-+		req_version->version = IP_SET_PROTOCOL_VERSION;
-+		res = copy_to_user(user, req_version,
-+				   sizeof(struct ip_set_req_version));
-+		goto done;
-+	}
-+	case IP_SET_OP_GET_BYNAME: {
-+		struct ip_set_req_get_set *req_get
-+			= (struct ip_set_req_get_set *) data;
-+
-+		if (*len != sizeof(struct ip_set_req_get_set)) {
-+			ip_set_printk("invalid GET_BYNAME (want %zu, got %d)",
-+				      sizeof(struct ip_set_req_get_set), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		req_get->set.name[IP_SET_MAXNAMELEN - 1] = '\0';
-+		index = ip_set_find_byname(req_get->set.name);
-+		req_get->set.index = index;
-+		goto copy;
-+	}
-+	case IP_SET_OP_GET_BYINDEX: {
-+		struct ip_set_req_get_set *req_get
-+			= (struct ip_set_req_get_set *) data;
-+
-+		if (*len != sizeof(struct ip_set_req_get_set)) {
-+			ip_set_printk("invalid GET_BYINDEX (want %zu, got %d)",
-+				      sizeof(struct ip_set_req_get_set), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		req_get->set.name[IP_SET_MAXNAMELEN - 1] = '\0';
-+		index = ip_set_find_byindex(req_get->set.index);
-+		strncpy(req_get->set.name,
-+			index == IP_SET_INVALID_ID ? ""
-+			: ip_set_list[index]->name, IP_SET_MAXNAMELEN);
-+		goto copy;
-+	}
-+	case IP_SET_OP_ADT_GET: {
-+		struct ip_set_req_adt_get *req_get
-+			= (struct ip_set_req_adt_get *) data;
-+
-+		if (*len != sizeof(struct ip_set_req_adt_get)) {
-+			ip_set_printk("invalid ADT_GET (want %zu, got %d)",
-+				      sizeof(struct ip_set_req_adt_get), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		req_get->set.name[IP_SET_MAXNAMELEN - 1] = '\0';
-+		index = ip_set_find_byname(req_get->set.name);
-+		if (index != IP_SET_INVALID_ID) {
-+			req_get->set.index = index;
-+			strncpy(req_get->typename,
-+				ip_set_list[index]->type->typename,
-+				IP_SET_MAXNAMELEN - 1);
-+		} else {
-+			res = -ENOENT;
-+			goto done;
-+		}
-+		goto copy;
-+	}
-+	case IP_SET_OP_MAX_SETS: {
-+		struct ip_set_req_max_sets *req_max_sets
-+			= (struct ip_set_req_max_sets *) data;
-+		ip_set_id_t i;
-+
-+		if (*len != sizeof(struct ip_set_req_max_sets)) {
-+			ip_set_printk("invalid MAX_SETS (want %zu, got %d)",
-+				      sizeof(struct ip_set_req_max_sets), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+
-+		if (strcmp(req_max_sets->set.name, IPSET_TOKEN_ALL) == 0) {
-+			req_max_sets->set.index = IP_SET_INVALID_ID;
-+		} else {
-+			req_max_sets->set.name[IP_SET_MAXNAMELEN - 1] = '\0';
-+			req_max_sets->set.index = 
-+				ip_set_find_byname(req_max_sets->set.name);
-+			if (req_max_sets->set.index == IP_SET_INVALID_ID) {
-+				res = -ENOENT;
-+				goto done;
-+			}
-+		}
-+		req_max_sets->max_sets = ip_set_max;
-+		req_max_sets->sets = 0;
-+		for (i = 0; i < ip_set_max; i++) {
-+			if (ip_set_list[i] != NULL)
-+				req_max_sets->sets++;
-+		}
-+		goto copy;
-+	}
-+	case IP_SET_OP_LIST_SIZE: 
-+	case IP_SET_OP_SAVE_SIZE: {
-+		struct ip_set_req_setnames *req_setnames
-+			= (struct ip_set_req_setnames *) data;
-+		struct ip_set_name_list *name_list;
-+		struct ip_set *set;
-+		ip_set_id_t i;
-+		int used;
-+
-+		if (*len < sizeof(struct ip_set_req_setnames)) {
-+			ip_set_printk("short LIST_SIZE (want >=%zu, got %d)",
-+				      sizeof(struct ip_set_req_setnames), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+
-+		req_setnames->size = 0;
-+		used = sizeof(struct ip_set_req_setnames);
-+		for (i = 0; i < ip_set_max; i++) {
-+			if (ip_set_list[i] == NULL)
-+				continue;
-+			name_list = (struct ip_set_name_list *) 
-+				(data + used);
-+			used += sizeof(struct ip_set_name_list);
-+			if (used > copylen) {
-+				res = -EAGAIN;
-+				goto done;
-+			}
-+			set = ip_set_list[i];
-+			/* Fill in index, name, etc. */
-+			name_list->index = i;
-+			name_list->id = set->id;
-+			strncpy(name_list->name,
-+				set->name,
-+				IP_SET_MAXNAMELEN - 1);
-+			strncpy(name_list->typename,
-+				set->type->typename,
-+				IP_SET_MAXNAMELEN - 1);
-+			DP("filled %s of type %s, index %u\n",
-+			   name_list->name, name_list->typename,
-+			   name_list->index);
-+			if (!(req_setnames->index == IP_SET_INVALID_ID
-+			      || req_setnames->index == i))
-+			      continue;
-+			/* Update size */
-+			switch (*op) {
-+			case IP_SET_OP_LIST_SIZE: {
-+				req_setnames->size += sizeof(struct ip_set_list)
-+					+ set->type->header_size
-+					+ set->type->list_members_size(set);
-+				FOREACH_HASH_DO(__set_hash_bindings_size_list, 
-+						i, &req_setnames->size);
-+				break;
-+			}
-+			case IP_SET_OP_SAVE_SIZE: {
-+				req_setnames->size += sizeof(struct ip_set_save)
-+					+ set->type->header_size
-+					+ set->type->list_members_size(set);
-+				FOREACH_HASH_DO(__set_hash_bindings_size_save,
-+						i, &req_setnames->size);
-+				break;
-+			}
-+			default:
-+				break;
-+			}
-+		}
-+		if (copylen != used) {
-+			res = -EAGAIN;
-+			goto done;
-+		}
-+		goto copy;
-+	}
-+	case IP_SET_OP_LIST: {
-+		struct ip_set_req_list *req_list
-+			= (struct ip_set_req_list *) data;
-+		ip_set_id_t i;
-+		int used;
-+
-+		if (*len < sizeof(struct ip_set_req_list)) {
-+			ip_set_printk("short LIST (want >=%zu, got %d)",
-+				      sizeof(struct ip_set_req_list), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		index = req_list->index;
-+		if (index != IP_SET_INVALID_ID
-+		    && ip_set_find_byindex(index) != index) {
-+		    	res = -ENOENT;
-+		    	goto done;
-+		}
-+		used = 0;
-+		if (index == IP_SET_INVALID_ID) {
-+			/* List all sets */
-+			for (i = 0; i < ip_set_max && res == 0; i++) {
-+				if (ip_set_list[i] != NULL)
-+					res = ip_set_list_set(i, data, &used, *len);
-+			}
-+		} else {
-+			/* List an individual set */
-+			res = ip_set_list_set(index, data, &used, *len);
-+		}
-+		if (res != 0)
-+			goto done;
-+		else if (copylen != used) {
-+			res = -EAGAIN;
-+			goto done;
-+		}
-+		goto copy;
-+	}
-+	case IP_SET_OP_SAVE: {
-+		struct ip_set_req_list *req_save
-+			= (struct ip_set_req_list *) data;
-+		ip_set_id_t i;
-+		int used;
-+
-+		if (*len < sizeof(struct ip_set_req_list)) {
-+			ip_set_printk("short SAVE (want >=%zu, got %d)",
-+				      sizeof(struct ip_set_req_list), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		index = req_save->index;
-+		if (index != IP_SET_INVALID_ID
-+		    && ip_set_find_byindex(index) != index) {
-+		    	res = -ENOENT;
-+		    	goto done;
-+		}
-+		used = 0;
-+		if (index == IP_SET_INVALID_ID) {
-+			/* Save all sets */
-+			for (i = 0; i < ip_set_max && res == 0; i++) {
-+				if (ip_set_list[i] != NULL)
-+					res = ip_set_save_set(i, data, &used, *len);
-+			}
-+		} else {
-+			/* Save an individual set */
-+			res = ip_set_save_set(index, data, &used, *len);
-+		}
-+		if (res == 0)
-+			res = ip_set_save_bindings(index, data, &used, *len);
-+			
-+		if (res != 0)
-+			goto done;
-+		else if (copylen != used) {
-+			res = -EAGAIN;
-+			goto done;
-+		}
-+		goto copy;
-+	}
-+	case IP_SET_OP_RESTORE: {
-+		struct ip_set_req_setnames *req_restore
-+			= (struct ip_set_req_setnames *) data;
-+		int line;
-+
-+		if (*len < sizeof(struct ip_set_req_setnames)
-+		    || *len != req_restore->size) {
-+			ip_set_printk("invalid RESTORE (want =%zu, got %d)",
-+				      req_restore->size, *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		line = ip_set_restore(data + sizeof(struct ip_set_req_setnames),
-+				      req_restore->size - sizeof(struct ip_set_req_setnames));
-+		DP("ip_set_restore: %u", line);
-+		if (line != 0) {
-+			res = -EAGAIN;
-+			req_restore->size = line;
-+			copylen = sizeof(struct ip_set_req_setnames);
-+			goto copy;
-+		}
-+		goto done;
-+	}
-+	default:
-+		res = -EBADMSG;
-+		goto done;
-+	}	/* end of switch(op) */
-+
-+    copy:
-+   	DP("set %s, copylen %u", index != IP_SET_INVALID_ID
-+   	             		 && ip_set_list[index]
-+   	             ? ip_set_list[index]->name
-+   	             : ":all:", copylen);
-+	if (res == 0)
-+		res = copy_to_user(user, data, copylen);
-+	else
-+		copy_to_user(user, data, copylen);
-+    	
-+    done:
-+	up(&ip_set_app_mutex);
-+	vfree(data);
-+	if (res > 0)
-+		res = 0;
-+	DP("final result %d", res);
-+	return res;
-+}
-+
-+static struct nf_sockopt_ops so_set = {
-+	.pf 		= PF_INET,
-+	.set_optmin 	= SO_IP_SET,
-+	.set_optmax 	= SO_IP_SET + 1,
-+	.set 		= &ip_set_sockfn_set,
-+	.get_optmin 	= SO_IP_SET,
-+	.get_optmax	= SO_IP_SET + 1,
-+	.get		= &ip_set_sockfn_get,
-+	.use		= 0
-+};
-+
-+static int max_sets, hash_size;
-+MODULE_PARM(max_sets, "i");
-+MODULE_PARM_DESC(max_sets, "maximal number of sets");
-+MODULE_PARM(hash_size, "i");
-+MODULE_PARM_DESC(hash_size, "hash size for bindings");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("module implementing core IP set support");
-+
-+static int __init init(void)
-+{
-+	int res;
-+	ip_set_id_t i;
-+
-+	get_random_bytes(&ip_set_hash_random, 4);
-+	if (max_sets)
-+		ip_set_max = max_sets;
-+	ip_set_list = vmalloc(sizeof(struct ip_set *) * ip_set_max);
-+	if (!ip_set_list) {
-+		printk(KERN_ERR "Unable to create ip_set_list\n");
-+		return -ENOMEM;
-+	}
-+	memset(ip_set_list, 0, sizeof(struct ip_set *) * ip_set_max);
-+	if (hash_size)
-+		ip_set_bindings_hash_size = hash_size;
-+	ip_set_hash = vmalloc(sizeof(struct list_head) * ip_set_bindings_hash_size);
-+	if (!ip_set_hash) {
-+		printk(KERN_ERR "Unable to create ip_set_hash\n");
-+		vfree(ip_set_list);
-+		return -ENOMEM;
-+	}
-+	for (i = 0; i < ip_set_bindings_hash_size; i++)
-+		INIT_LIST_HEAD(&ip_set_hash[i]);
-+
-+	INIT_LIST_HEAD(&set_type_list);
-+
-+	res = nf_register_sockopt(&so_set);
-+	if (res != 0) {
-+		ip_set_printk("SO_SET registry failed: %d", res);
-+		vfree(ip_set_list);
-+		vfree(ip_set_hash);
-+		return res;
-+	}
-+	return 0;
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* There can't be any existing set or binding. Racy. */
-+	nf_unregister_sockopt(&so_set);
-+	vfree(ip_set_list);
-+	vfree(ip_set_hash);
-+	DP("these are the famous last words");
-+}
-+
-+EXPORT_SYMBOL(ip_set_register_set_type);
-+EXPORT_SYMBOL(ip_set_unregister_set_type);
-+
-+EXPORT_SYMBOL(ip_set_get_byname);
-+EXPORT_SYMBOL(ip_set_get_byindex);
-+EXPORT_SYMBOL(ip_set_put);
-+
-+EXPORT_SYMBOL(ip_set_addip_kernel);
-+EXPORT_SYMBOL(ip_set_delip_kernel);
-+EXPORT_SYMBOL(ip_set_testip_kernel);
-+
-+module_init(init);
-+module_exit(fini);
-diff -Naur linux-old/net/ipv4/netfilter/ip_set_iphash.c linux-new/net/ipv4/netfilter/ip_set_iphash.c
---- linux-old/net/ipv4/netfilter/ip_set_iphash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/net/ipv4/netfilter/ip_set_iphash.c	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,379 @@
-+/* Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module implementing an ip hash set */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <asm/softirq.h>
-+#include <linux/spinlock.h>
-+#include <linux/vmalloc.h>
-+#include <linux/random.h>
-+
-+#include <net/ip.h>
-+
-+#include <linux/netfilter_ipv4/ip_set_malloc.h>
-+#include <linux/netfilter_ipv4/ip_set_iphash.h>
-+#include <linux/netfilter_ipv4/ip_set_jhash.h>
-+#include <linux/netfilter_ipv4/ip_set_prime.h>
-+
-+static inline __u32
-+jhash_ip(const struct ip_set_iphash *map, ip_set_ip_t ip)
-+{
-+	return jhash_1word(ip, map->initval);
-+}
-+
-+static inline __u32
-+randhash_ip(const struct ip_set_iphash *map, ip_set_ip_t ip)
-+{
-+	return (1 + ip % map->prime);
-+}
-+
-+static inline __u32
-+hash_id(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+	__u32 jhash, randhash, id;
-+	u_int16_t i;
-+
-+	*hash_ip = ip & map->netmask;
-+	jhash = jhash_ip(map, *hash_ip);
-+	randhash = randhash_ip(map, *hash_ip);
-+	DP("set: %s, ip:%u.%u.%u.%u, %u.%u.%u.%u, %u.%u.%u.%u",
-+	   set->name, HIPQUAD(ip), HIPQUAD(*hash_ip), HIPQUAD(map->netmask));
-+	
-+	for (i = 0; i < map->probes; i++) {
-+		id = (jhash + i * randhash) % map->hashsize;
-+		DP("hash key: %u", id);
-+		if (map->members[id] == *hash_ip)
-+			return id;
-+		/* No shortcut at testing - there can be deleted
-+		 * entries. */
-+	}
-+	return UINT_MAX;
-+}
-+
-+static inline int
-+__testip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	return (hash_id(set, ip, hash_ip) != UINT_MAX);
-+}
-+
-+static int
-+testip(struct ip_set *set, const void *data, size_t size,
-+       ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_iphash *req = 
-+	    (struct ip_set_req_iphash *) data;
-+
-+	if (size != sizeof(struct ip_set_req_iphash)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iphash),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __testip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+testip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+		u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __testip(set,
-+			ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+						: skb->nh.iph->daddr),
-+			hash_ip);
-+}
-+
-+static inline int
-+__addip(struct ip_set_iphash *map, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	__u32 jhash, randhash, probe;
-+	u_int16_t i;
-+
-+	*hash_ip = ip & map->netmask;
-+	jhash = jhash_ip(map, *hash_ip);
-+	randhash = randhash_ip(map, *hash_ip);
-+	
-+	for (i = 0; i < map->probes; i++) {
-+		probe = (jhash + i * randhash) % map->hashsize;
-+		if (map->members[probe] == *hash_ip)
-+			return -EEXIST;
-+		if (!map->members[probe]) {
-+			map->members[probe] = *hash_ip;
-+			return 0;
-+		}
-+	}
-+	/* Trigger rehashing */
-+	return -EAGAIN;
-+}
-+
-+static int
-+addip(struct ip_set *set, const void *data, size_t size,
-+        ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_iphash *req = 
-+	    (struct ip_set_req_iphash *) data;
-+
-+	if (size != sizeof(struct ip_set_req_iphash)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iphash),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __addip((struct ip_set_iphash *) set->data, req->ip, hash_ip);
-+}
-+
-+static int
-+addip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __addip((struct ip_set_iphash *) set->data,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       hash_ip);
-+}
-+
-+static int retry(struct ip_set *set)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+	ip_set_ip_t hash_ip, *members;
-+	u_int32_t i, hashsize;
-+	unsigned newbytes;
-+	int res;
-+	struct ip_set_iphash tmp = {
-+		.hashsize = map->hashsize,
-+		.probes = map->probes,
-+		.resize = map->resize,
-+		.netmask = map->netmask,
-+	};
-+	
-+	if (map->resize == 0)
-+		return -ERANGE;
-+
-+    again:
-+    	res = 0;
-+    	
-+	/* Calculate new parameters */
-+	get_random_bytes(&tmp.initval, 4);
-+	hashsize = tmp.hashsize + (tmp.hashsize * map->resize)/100;
-+	if (hashsize == tmp.hashsize)
-+		hashsize++;
-+	tmp.prime = make_prime(hashsize);
-+	
-+	ip_set_printk("rehashing of set %s triggered: "
-+		      "hashsize grows from %u to %u",
-+		      set->name, tmp.hashsize, hashsize);
-+	tmp.hashsize = hashsize;
-+	
-+	newbytes = hashsize * sizeof(ip_set_ip_t);
-+	tmp.members = ip_set_malloc(newbytes);
-+	if (!tmp.members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		return -ENOMEM;
-+	}
-+	memset(tmp.members, 0, newbytes);
-+	
-+	write_lock_bh(&set->lock);
-+	map = (struct ip_set_iphash *) set->data; /* Play safe */
-+	for (i = 0; i < map->hashsize && res == 0; i++) {
-+		if (map->members[i])
-+			res = __addip(&tmp, map->members[i], &hash_ip);
-+	}
-+	if (res) {
-+		/* Failure, try again */
-+		write_unlock_bh(&set->lock);
-+		ip_set_free(tmp.members, newbytes);
-+		goto again;
-+	}
-+	
-+	/* Success at resizing! */
-+	members = map->members;
-+	hashsize = map->hashsize;
-+	
-+	map->initval = tmp.initval;
-+	map->prime = tmp.prime;
-+	map->hashsize = tmp.hashsize;
-+	map->members = tmp.members;
-+	write_unlock_bh(&set->lock);
-+
-+	ip_set_free(members, hashsize * sizeof(ip_set_ip_t));
-+
-+	return 0;
-+}
-+
-+static inline int
-+__delip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+	ip_set_ip_t id = hash_id(set, ip, hash_ip);
-+
-+	if (id == UINT_MAX)
-+		return -EEXIST;
-+		
-+	map->members[id] = 0;
-+	return 0;
-+}
-+
-+static int
-+delip(struct ip_set *set, const void *data, size_t size,
-+        ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_iphash *req =
-+	    (struct ip_set_req_iphash *) data;
-+
-+	if (size != sizeof(struct ip_set_req_iphash)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iphash),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __delip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+delip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	       u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __delip(set,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       hash_ip);
-+}
-+
-+static int create(struct ip_set *set, const void *data, size_t size)
-+{
-+	unsigned newbytes;
-+	struct ip_set_req_iphash_create *req =
-+	    (struct ip_set_req_iphash_create *) data;
-+	struct ip_set_iphash *map;
-+
-+	if (size != sizeof(struct ip_set_req_iphash_create)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			       sizeof(struct ip_set_req_iphash_create),
-+			       size);
-+		return -EINVAL;
-+	}
-+
-+	if (req->hashsize < 1) {
-+		ip_set_printk("hashsize too small");
-+		return -ENOEXEC;
-+	}
-+
-+	map = kmalloc(sizeof(struct ip_set_iphash), GFP_KERNEL);
-+	if (!map) {
-+		DP("out of memory for %d bytes",
-+		   sizeof(struct ip_set_iphash));
-+		return -ENOMEM;
-+	}
-+	get_random_bytes(&map->initval, 4);
-+	map->prime = make_prime(req->hashsize);
-+	map->hashsize = req->hashsize;
-+	map->probes = req->probes;
-+	map->resize = req->resize;
-+	map->netmask = req->netmask;
-+	newbytes = map->hashsize * sizeof(ip_set_ip_t);
-+	map->members = ip_set_malloc(newbytes);
-+	if (!map->members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		kfree(map);
-+		return -ENOMEM;
-+	}
-+	memset(map->members, 0, newbytes);
-+
-+	set->data = map;
-+	return 0;
-+}
-+
-+static void destroy(struct ip_set *set)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+
-+	ip_set_free(map->members, map->hashsize * sizeof(ip_set_ip_t));
-+	kfree(map);
-+
-+	set->data = NULL;
-+}
-+
-+static void flush(struct ip_set *set)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+	memset(map->members, 0, map->hashsize * sizeof(ip_set_ip_t));
-+}
-+
-+static void list_header(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+	struct ip_set_req_iphash_create *header =
-+	    (struct ip_set_req_iphash_create *) data;
-+
-+	header->hashsize = map->hashsize;
-+	header->probes = map->probes;
-+	header->resize = map->resize;
-+	header->netmask = map->netmask;
-+}
-+
-+static int list_members_size(const struct ip_set *set)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+
-+	return (map->hashsize * sizeof(ip_set_ip_t));
-+}
-+
-+static void list_members(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+	int bytes = map->hashsize * sizeof(ip_set_ip_t);
-+
-+	memcpy(data, map->members, bytes);
-+}
-+
-+static struct ip_set_type ip_set_iphash = {
-+	.typename		= SETTYPE_NAME,
-+	.typecode		= IPSET_TYPE_IP,
-+	.protocol_version	= IP_SET_PROTOCOL_VERSION,
-+	.create			= &create,
-+	.destroy		= &destroy,
-+	.flush			= &flush,
-+	.reqsize		= sizeof(struct ip_set_req_iphash),
-+	.addip			= &addip,
-+	.addip_kernel		= &addip_kernel,
-+	.retry			= &retry,
-+	.delip			= &delip,
-+	.delip_kernel		= &delip_kernel,
-+	.testip			= &testip,
-+	.testip_kernel		= &testip_kernel,
-+	.header_size		= sizeof(struct ip_set_req_iphash_create),
-+	.list_header		= &list_header,
-+	.list_members_size	= &list_members_size,
-+	.list_members		= &list_members,
-+	.me			= THIS_MODULE,
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("iphash type of IP sets");
-+
-+static int __init init(void)
-+{
-+	return ip_set_register_set_type(&ip_set_iphash);
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* FIXME: possible race with ip_set_create() */
-+	ip_set_unregister_set_type(&ip_set_iphash);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Naur linux-old/net/ipv4/netfilter/ip_set_ipmap.c linux-new/net/ipv4/netfilter/ip_set_ipmap.c
---- linux-old/net/ipv4/netfilter/ip_set_ipmap.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/net/ipv4/netfilter/ip_set_ipmap.c	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,314 @@
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ *                         Patrick Schaaf <bof@bof.de>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module implementing an IP set type: the single bitmap type */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <asm/softirq.h>
-+#include <linux/spinlock.h>
-+
-+#include <linux/netfilter_ipv4/ip_set_ipmap.h>
-+
-+static inline ip_set_ip_t
-+ip_to_id(const struct ip_set_ipmap *map, ip_set_ip_t ip)
-+{
-+	return (ip - map->first_ip)/map->hosts;
-+}
-+
-+static inline int
-+__testip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+	
-+	if (ip < map->first_ip || ip > map->last_ip)
-+		return -ERANGE;
-+
-+	*hash_ip = ip & map->netmask;
-+	DP("set: %s, ip:%u.%u.%u.%u, %u.%u.%u.%u",
-+	   set->name, HIPQUAD(ip), HIPQUAD(*hash_ip));
-+	return !!test_bit(ip_to_id(map, *hash_ip), map->members);
-+}
-+
-+static int
-+testip(struct ip_set *set, const void *data, size_t size,
-+       ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_ipmap *req = 
-+	    (struct ip_set_req_ipmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_ipmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_ipmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __testip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+testip_kernel(struct ip_set *set, 
-+	      const struct sk_buff *skb,
-+	      u_int32_t flags,
-+	      ip_set_ip_t *hash_ip)
-+{
-+	int res;
-+	
-+	DP("flag: %s src: %u.%u.%u.%u dst: %u.%u.%u.%u",
-+	   flags & IPSET_SRC ? "SRC" : "DST",
-+	   NIPQUAD(skb->nh.iph->saddr),
-+	   NIPQUAD(skb->nh.iph->daddr));
-+
-+	res =  __testip(set,
-+			ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+						: skb->nh.iph->daddr),
-+			hash_ip);
-+	return (res < 0 ? 0 : res);
-+}
-+
-+static inline int
-+__addip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+
-+	if (ip < map->first_ip || ip > map->last_ip)
-+		return -ERANGE;
-+
-+	*hash_ip = ip & map->netmask;
-+	DP("%u.%u.%u.%u, %u.%u.%u.%u", HIPQUAD(ip), HIPQUAD(*hash_ip));
-+	if (test_and_set_bit(ip_to_id(map, *hash_ip), map->members))
-+		return -EEXIST;
-+
-+	return 0;
-+}
-+
-+static int
-+addip(struct ip_set *set, const void *data, size_t size,
-+      ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_ipmap *req = 
-+	    (struct ip_set_req_ipmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_ipmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_ipmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	DP("%u.%u.%u.%u", HIPQUAD(req->ip));
-+	return __addip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+addip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __addip(set,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       hash_ip);
-+}
-+
-+static inline int 
-+__delip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+
-+	if (ip < map->first_ip || ip > map->last_ip)
-+		return -ERANGE;
-+
-+	*hash_ip = ip & map->netmask;
-+	DP("%u.%u.%u.%u, %u.%u.%u.%u", HIPQUAD(ip), HIPQUAD(*hash_ip));
-+	if (!test_and_clear_bit(ip_to_id(map, *hash_ip), map->members))
-+		return -EEXIST;
-+	
-+	return 0;
-+}
-+
-+static int
-+delip(struct ip_set *set, const void *data, size_t size,
-+      ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_ipmap *req =
-+	    (struct ip_set_req_ipmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_ipmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_ipmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __delip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+delip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __delip(set,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       hash_ip);
-+}
-+
-+static int create(struct ip_set *set, const void *data, size_t size)
-+{
-+	int newbytes;
-+	struct ip_set_req_ipmap_create *req =
-+	    (struct ip_set_req_ipmap_create *) data;
-+	struct ip_set_ipmap *map;
-+
-+	if (size != sizeof(struct ip_set_req_ipmap_create)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_ipmap_create),
-+			      size);
-+		return -EINVAL;
-+	}
-+
-+	DP("from %u.%u.%u.%u to %u.%u.%u.%u",
-+	   HIPQUAD(req->from), HIPQUAD(req->to));
-+
-+	if (req->from > req->to) {
-+		DP("bad ip range");
-+		return -ENOEXEC;
-+	}
-+
-+	if (req->to - req->from > MAX_RANGE) {
-+		ip_set_printk("range too big (max %d addresses)",
-+			       MAX_RANGE);
-+		return -ENOEXEC;
-+	}
-+
-+	map = kmalloc(sizeof(struct ip_set_ipmap), GFP_KERNEL);
-+	if (!map) {
-+		DP("out of memory for %d bytes",
-+		   sizeof(struct ip_set_ipmap));
-+		return -ENOMEM;
-+	}
-+	map->first_ip = req->from;
-+	map->last_ip = req->to;
-+	map->netmask = req->netmask;
-+
-+	if (req->netmask == 0xFFFFFFFF) {
-+		map->hosts = 1;
-+		map->sizeid = map->last_ip - map->first_ip + 1;
-+	} else {
-+		unsigned int mask_bits, netmask_bits;
-+		ip_set_ip_t mask;
-+		
-+		map->first_ip &= map->netmask;	/* Should we better bark? */
-+		
-+		mask = range_to_mask(map->first_ip, map->last_ip, &mask_bits);
-+		netmask_bits = mask_to_bits(map->netmask);
-+		
-+		if (!mask || netmask_bits <= mask_bits)
-+			return -ENOEXEC;
-+
-+		map->hosts = 2 << (32 - netmask_bits - 1);
-+		map->sizeid = 2 << (netmask_bits - mask_bits - 1);
-+	}
-+	newbytes = bitmap_bytes(0, map->sizeid - 1);
-+	map->members = kmalloc(newbytes, GFP_KERNEL);
-+	if (!map->members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		kfree(map);
-+		return -ENOMEM;
-+	}
-+	memset(map->members, 0, newbytes);
-+	
-+	set->data = map;
-+	return 0;
-+}
-+
-+static void destroy(struct ip_set *set)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+	
-+	kfree(map->members);
-+	kfree(map);
-+	
-+	set->data = NULL;
-+}
-+
-+static void flush(struct ip_set *set)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+	memset(map->members, 0, bitmap_bytes(0, map->sizeid - 1));
-+}
-+
-+static void list_header(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+	struct ip_set_req_ipmap_create *header =
-+	    (struct ip_set_req_ipmap_create *) data;
-+
-+	header->from = map->first_ip;
-+	header->to = map->last_ip;
-+	header->netmask = map->netmask;
-+}
-+
-+static int list_members_size(const struct ip_set *set)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+
-+	return bitmap_bytes(0, map->sizeid - 1);
-+}
-+
-+static void list_members(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+	int bytes = bitmap_bytes(0, map->sizeid - 1);
-+
-+	memcpy(data, map->members, bytes);
-+}
-+
-+static struct ip_set_type ip_set_ipmap = {
-+	.typename		= SETTYPE_NAME,
-+	.typecode		= IPSET_TYPE_IP,
-+	.protocol_version	= IP_SET_PROTOCOL_VERSION,
-+	.create			= &create,
-+	.destroy		= &destroy,
-+	.flush			= &flush,
-+	.reqsize		= sizeof(struct ip_set_req_ipmap),
-+	.addip			= &addip,
-+	.addip_kernel		= &addip_kernel,
-+	.delip			= &delip,
-+	.delip_kernel		= &delip_kernel,
-+	.testip			= &testip,
-+	.testip_kernel		= &testip_kernel,
-+	.header_size		= sizeof(struct ip_set_req_ipmap_create),
-+	.list_header		= &list_header,
-+	.list_members_size	= &list_members_size,
-+	.list_members		= &list_members,
-+	.me			= THIS_MODULE,
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("ipmap type of IP sets");
-+
-+static int __init init(void)
-+{
-+	return ip_set_register_set_type(&ip_set_ipmap);
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* FIXME: possible race with ip_set_create() */
-+	ip_set_unregister_set_type(&ip_set_ipmap);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Naur linux-old/net/ipv4/netfilter/ip_set_iptree.c linux-new/net/ipv4/netfilter/ip_set_iptree.c
---- linux-old/net/ipv4/netfilter/ip_set_iptree.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/net/ipv4/netfilter/ip_set_iptree.c	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,511 @@
-+/* Copyright (C) 2005 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module implementing an IP set type: the iptree type */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <linux/interrupt.h>
-+#include <linux/spinlock.h>
-+
-+#include <linux/netfilter_ipv4/ip_set_iptree.h>
-+
-+/* Garbage collection interval in seconds: */
-+#define IPTREE_GC_TIME		5*60
-+/* Sleep so many milliseconds before trying again 
-+ * to delete the gc timer at destroying a set */ 
-+#define IPTREE_DESTROY_SLEEP	100
-+
-+static kmem_cache_t *branch_cachep;
-+static kmem_cache_t *leaf_cachep;
-+
-+#define ABCD(a,b,c,d,addrp) do {		\
-+	a = ((unsigned char *)addrp)[3];	\
-+	b = ((unsigned char *)addrp)[2];	\
-+	c = ((unsigned char *)addrp)[1];	\
-+	d = ((unsigned char *)addrp)[0];	\
-+} while (0)
-+
-+#define TESTIP_WALK(map, elem, branch) do {	\
-+	if ((map)->tree[elem]) {		\
-+		branch = (map)->tree[elem];	\
-+	} else 					\
-+		return 0;			\
-+} while (0)
-+
-+static inline int
-+__testip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned char a,b,c,d;
-+	
-+	*hash_ip = ip;
-+	ABCD(a, b, c, d, hash_ip);
-+	DP("%u %u %u %u timeout %u", a, b, c, d, map->timeout);
-+	TESTIP_WALK(map, a, btree);
-+	TESTIP_WALK(btree, b, ctree);
-+	TESTIP_WALK(ctree, c, dtree);
-+	DP("%lu %lu", dtree->expires[d], jiffies);
-+	return !!(map->timeout ? (time_after(dtree->expires[d], jiffies))
-+			       : dtree->expires[d]);
-+}
-+
-+static int
-+testip(struct ip_set *set, const void *data, size_t size,
-+       ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_iptree *req = 
-+	    (struct ip_set_req_iptree *) data;
-+
-+	if (size != sizeof(struct ip_set_req_iptree)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iptree),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __testip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+testip_kernel(struct ip_set *set, 
-+	      const struct sk_buff *skb,
-+	      u_int32_t flags,
-+	      ip_set_ip_t *hash_ip)
-+{
-+	int res;
-+	
-+	DP("flag: %s src: %u.%u.%u.%u dst: %u.%u.%u.%u",
-+	   flags & IPSET_SRC ? "SRC" : "DST",
-+	   NIPQUAD(skb->nh.iph->saddr),
-+	   NIPQUAD(skb->nh.iph->daddr));
-+
-+	res =  __testip(set,
-+			ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+						: skb->nh.iph->daddr),
-+			hash_ip);
-+	return (res < 0 ? 0 : res);
-+}
-+
-+#define ADDIP_WALK(map, elem, branch, type, cachep) do {	\
-+	if ((map)->tree[elem]) {				\
-+		DP("found %u", elem);				\
-+		branch = (map)->tree[elem];			\
-+	} else {						\
-+		branch = (type *)				\
-+			kmem_cache_alloc(cachep, GFP_KERNEL);	\
-+		if (branch == NULL)				\
-+			return -ENOMEM;				\
-+		memset(branch, 0, sizeof(*branch));		\
-+		(map)->tree[elem] = branch;			\
-+		DP("alloc %u", elem);				\
-+	}							\
-+} while (0)	
-+
-+static inline int
-+__addip(struct ip_set *set, ip_set_ip_t ip, unsigned int timeout,
-+	ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned char a,b,c,d;
-+	int ret = 0;
-+	
-+	*hash_ip = ip;
-+	ABCD(a, b, c, d, hash_ip);
-+	DP("%u %u %u %u timeout %u", a, b, c, d, timeout);
-+	ADDIP_WALK(map, a, btree, struct ip_set_iptreeb, branch_cachep);
-+	ADDIP_WALK(btree, b, ctree, struct ip_set_iptreec, branch_cachep);
-+	ADDIP_WALK(ctree, c, dtree, struct ip_set_iptreed, leaf_cachep);
-+	if (dtree->expires[d]
-+	    && (!map->timeout || time_after(dtree->expires[d], jiffies)))
-+	    	ret = -EEXIST;
-+	dtree->expires[d] = map->timeout ? (timeout * HZ + jiffies) : 1;
-+	DP("%u %lu", d, dtree->expires[d]);
-+	return ret;
-+}
-+
-+static int
-+addip(struct ip_set *set, const void *data, size_t size,
-+      ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_req_iptree *req = 
-+		(struct ip_set_req_iptree *) data;
-+
-+	if (size != sizeof(struct ip_set_req_iptree)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iptree),
-+			      size);
-+		return -EINVAL;
-+	}
-+	DP("%u.%u.%u.%u %u", HIPQUAD(req->ip), req->timeout);
-+	return __addip(set, req->ip,
-+		       req->timeout ? req->timeout : map->timeout,
-+		       hash_ip);
-+}
-+
-+static int
-+addip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+
-+	return __addip(set,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       map->timeout,
-+		       hash_ip);
-+}
-+
-+#define DELIP_WALK(map, elem, branch) do {	\
-+	if ((map)->tree[elem]) {		\
-+		branch = (map)->tree[elem];	\
-+	} else 					\
-+		return -EEXIST;			\
-+} while (0)
-+
-+static inline int 
-+__delip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned char a,b,c,d;
-+	
-+	*hash_ip = ip;
-+	ABCD(a, b, c, d, hash_ip);
-+	DELIP_WALK(map, a, btree);
-+	DELIP_WALK(btree, b, ctree);
-+	DELIP_WALK(ctree, c, dtree);
-+
-+	if (dtree->expires[d]) {
-+		dtree->expires[d] = 0;
-+		return 0;
-+	}
-+	return -EEXIST;
-+}
-+
-+static int
-+delip(struct ip_set *set, const void *data, size_t size,
-+      ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_iptree *req =
-+	    (struct ip_set_req_iptree *) data;
-+
-+	if (size != sizeof(struct ip_set_req_iptree)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iptree),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __delip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+delip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __delip(set,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       hash_ip);
-+}
-+
-+#define LOOP_WALK_BEGIN(map, i, branch) \
-+	for (i = 0; i < 255; i++) {	\
-+		if (!(map)->tree[i])	\
-+			continue;	\
-+		branch = (map)->tree[i]
-+
-+#define LOOP_WALK_END }
-+
-+static void ip_tree_gc(unsigned long ul_set)
-+{
-+	struct ip_set *set = (void *) ul_set;
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned char a,b,c,d;
-+	unsigned char i,j,k;
-+
-+	i = j = k = 0;
-+	DP("gc: %s", set->name);
-+	write_lock_bh(&set->lock);
-+	LOOP_WALK_BEGIN(map, a, btree);
-+	LOOP_WALK_BEGIN(btree, b, ctree);
-+	LOOP_WALK_BEGIN(ctree, c, dtree);
-+	for (d = 0; d < 255; d++) {
-+		if (dtree->expires[d]) {
-+			DP("gc: %u %u %u %u: expires %lu jiffies %lu",
-+			    a, b, c, d,
-+			    dtree->expires[d], jiffies);
-+			if (map->timeout
-+			    && time_before(dtree->expires[d], jiffies))
-+			    	dtree->expires[d] = 0;
-+			else
-+				k = 1;
-+		}
-+	}
-+	if (k == 0) {
-+		DP("gc: %s: leaf %u %u %u empty",
-+		    set->name, a, b, c);
-+		kmem_cache_free(leaf_cachep, dtree);
-+		ctree->tree[c] = NULL;
-+	} else {
-+		DP("gc: %s: leaf %u %u %u not empty",
-+		    set->name, a, b, c);
-+		j = 1;
-+		k = 0;
-+	}
-+	LOOP_WALK_END;
-+	if (j == 0) {
-+		DP("gc: %s: branch %u %u empty",
-+		    set->name, a, b);
-+		kmem_cache_free(branch_cachep, ctree);
-+		btree->tree[b] = NULL;
-+	} else {
-+		DP("gc: %s: branch %u %u not empty",
-+		    set->name, a, b);
-+		i = 1;
-+		j = k = 0;
-+	}
-+	LOOP_WALK_END;
-+	if (i == 0) {
-+		DP("gc: %s: branch %u empty",
-+		    set->name, a);
-+		kmem_cache_free(branch_cachep, btree);
-+		map->tree[a] = NULL;
-+	} else {
-+		DP("gc: %s: branch %u not empty",
-+		    set->name, a);
-+		i = j = k = 0;
-+	}
-+	LOOP_WALK_END;
-+	write_unlock_bh(&set->lock);
-+	
-+	map->gc.expires = jiffies + map->gc_interval * HZ;
-+	add_timer(&map->gc);
-+}
-+
-+static int create(struct ip_set *set, const void *data, size_t size)
-+{
-+	struct ip_set_req_iptree_create *req =
-+	    (struct ip_set_req_iptree_create *) data;
-+	struct ip_set_iptree *map;
-+
-+	if (size != sizeof(struct ip_set_req_iptree_create)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iptree_create),
-+			      size);
-+		return -EINVAL;
-+	}
-+
-+	map = kmalloc(sizeof(struct ip_set_iptree), GFP_KERNEL);
-+	if (!map) {
-+		DP("out of memory for %d bytes",
-+		   sizeof(struct ip_set_iptree));
-+		return -ENOMEM;
-+	}
-+	memset(map, 0, sizeof(*map));
-+	map->timeout = req->timeout;
-+	set->data = map;
-+
-+	/* If there is no timeout for the entries,
-+	 * we still have to call gc because delete
-+	 * do not clean up empty branches */
-+	map->gc_interval = IPTREE_GC_TIME;
-+	init_timer(&map->gc);
-+	map->gc.data = (unsigned long) set;
-+	map->gc.function = ip_tree_gc;
-+	map->gc.expires = jiffies + map->gc_interval * HZ;
-+	add_timer(&map->gc);
-+	
-+	return 0;
-+}
-+
-+static void __flush(struct ip_set_iptree *map)
-+{
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned int a,b,c;
-+
-+	LOOP_WALK_BEGIN(map, a, btree);
-+	LOOP_WALK_BEGIN(btree, b, ctree);
-+	LOOP_WALK_BEGIN(ctree, c, dtree);
-+	kmem_cache_free(leaf_cachep, dtree);
-+	LOOP_WALK_END;
-+	kmem_cache_free(branch_cachep, ctree);
-+	LOOP_WALK_END;
-+	kmem_cache_free(branch_cachep, btree);
-+	LOOP_WALK_END;
-+}
-+
-+static void destroy(struct ip_set *set)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+
-+	while (!del_timer(&map->gc))
-+		msleep(IPTREE_DESTROY_SLEEP);
-+	__flush(map);
-+	kfree(map);
-+	set->data = NULL;
-+}
-+
-+static void flush(struct ip_set *set)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	unsigned int timeout = map->timeout;
-+	
-+	__flush(map);
-+	memset(map, 0, sizeof(*map));
-+	map->timeout = timeout;
-+}
-+
-+static void list_header(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_req_iptree_create *header =
-+	    (struct ip_set_req_iptree_create *) data;
-+
-+	header->timeout = map->timeout;
-+}
-+
-+static int list_members_size(const struct ip_set *set)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned char a,b,c,d;
-+	unsigned int count = 0;
-+
-+	LOOP_WALK_BEGIN(map, a, btree);
-+	LOOP_WALK_BEGIN(btree, b, ctree);
-+	LOOP_WALK_BEGIN(ctree, c, dtree);
-+	for (d = 0; d < 255; d++) {
-+		if (dtree->expires[d]
-+		    && (!map->timeout || time_after(dtree->expires[d], jiffies)))
-+		    	count++;
-+	}
-+	LOOP_WALK_END;
-+	LOOP_WALK_END;
-+	LOOP_WALK_END;
-+
-+	DP("members %u", count);
-+	return (count * sizeof(struct ip_set_req_iptree));
-+}
-+
-+static void list_members(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned char a,b,c,d;
-+	size_t offset = 0;
-+	struct ip_set_req_iptree *entry;
-+
-+	LOOP_WALK_BEGIN(map, a, btree);
-+	LOOP_WALK_BEGIN(btree, b, ctree);
-+	LOOP_WALK_BEGIN(ctree, c, dtree);
-+	for (d = 0; d < 255; d++) {
-+		if (dtree->expires[d]
-+		    && (!map->timeout || time_after(dtree->expires[d], jiffies))) {
-+		    	entry = (struct ip_set_req_iptree *)(data + offset);
-+		    	entry->ip = ((a << 24) | (b << 16) | (c << 8) | d);
-+		    	entry->timeout = !map->timeout ? 0 
-+				: (dtree->expires[d] - jiffies)/HZ;
-+			offset += sizeof(struct ip_set_req_iptree);
-+		}
-+	}
-+	LOOP_WALK_END;
-+	LOOP_WALK_END;
-+	LOOP_WALK_END;
-+}
-+
-+static struct ip_set_type ip_set_iptree = {
-+	.typename		= SETTYPE_NAME,
-+	.typecode		= IPSET_TYPE_IP,
-+	.protocol_version	= IP_SET_PROTOCOL_VERSION,
-+	.create			= &create,
-+	.destroy		= &destroy,
-+	.flush			= &flush,
-+	.reqsize		= sizeof(struct ip_set_req_iptree),
-+	.addip			= &addip,
-+	.addip_kernel		= &addip_kernel,
-+	.delip			= &delip,
-+	.delip_kernel		= &delip_kernel,
-+	.testip			= &testip,
-+	.testip_kernel		= &testip_kernel,
-+	.header_size		= sizeof(struct ip_set_req_iptree_create),
-+	.list_header		= &list_header,
-+	.list_members_size	= &list_members_size,
-+	.list_members		= &list_members,
-+	.me			= THIS_MODULE,
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("iptree type of IP sets");
-+
-+static int __init init(void)
-+{
-+	int ret;
-+	
-+	branch_cachep = kmem_cache_create("ip_set_iptreeb",
-+				sizeof(struct ip_set_iptreeb),
-+				0, 0, NULL, NULL);
-+	if (!branch_cachep) {
-+		printk(KERN_ERR "Unable to create ip_set_iptreeb slab cache\n");
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+	leaf_cachep = kmem_cache_create("ip_set_iptreed",
-+				sizeof(struct ip_set_iptreed),
-+				0, 0, NULL, NULL);
-+	if (!leaf_cachep) {
-+		printk(KERN_ERR "Unable to create ip_set_iptreed slab cache\n");
-+		ret = -ENOMEM;
-+		goto free_branch;
-+	}
-+	ret = ip_set_register_set_type(&ip_set_iptree);
-+	if (ret == 0)
-+		goto out;
-+
-+	kmem_cache_destroy(leaf_cachep);
-+    free_branch:	
-+	kmem_cache_destroy(branch_cachep);
-+    out:
-+	return ret;
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* FIXME: possible race with ip_set_create() */
-+	ip_set_unregister_set_type(&ip_set_iptree);
-+	kmem_cache_destroy(leaf_cachep);
-+	kmem_cache_destroy(branch_cachep);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Naur linux-old/net/ipv4/netfilter/ip_set_macipmap.c linux-new/net/ipv4/netfilter/ip_set_macipmap.c
---- linux-old/net/ipv4/netfilter/ip_set_macipmap.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/net/ipv4/netfilter/ip_set_macipmap.c	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,340 @@
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ *                         Patrick Schaaf <bof@bof.de>
-+ *                         Martin Josefsson <gandalf@wlug.westbo.se>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module implementing an IP set type: the macipmap type */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <asm/softirq.h>
-+#include <linux/spinlock.h>
-+#include <linux/if_ether.h>
-+#include <linux/vmalloc.h>
-+
-+#include <linux/netfilter_ipv4/ip_set_malloc.h>
-+#include <linux/netfilter_ipv4/ip_set_macipmap.h>
-+
-+static int
-+testip(struct ip_set *set, const void *data, size_t size, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_macipmap *map = (struct ip_set_macipmap *) set->data;
-+	struct ip_set_macip *table = (struct ip_set_macip *) map->members;	
-+	struct ip_set_req_macipmap *req = (struct ip_set_req_macipmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_macipmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_macipmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+
-+	if (req->ip < map->first_ip || req->ip > map->last_ip)
-+		return -ERANGE;
-+
-+	*hash_ip = req->ip;
-+	DP("set: %s, ip:%u.%u.%u.%u, %u.%u.%u.%u",
-+	   set->name, HIPQUAD(req->ip), HIPQUAD(*hash_ip));		
-+	if (test_bit(IPSET_MACIP_ISSET,
-+		     &table[req->ip - map->first_ip].flags)) {
-+		return (memcmp(req->ethernet,
-+			       &table[req->ip - map->first_ip].ethernet,
-+			       ETH_ALEN) == 0);
-+	} else {
-+		return (map->flags & IPSET_MACIP_MATCHUNSET ? 1 : 0);
-+	}
-+}
-+
-+static int
-+testip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	      u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+	struct ip_set_macip *table =
-+	    (struct ip_set_macip *) map->members;
-+	ip_set_ip_t ip;
-+	
-+	ip = ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr
-+				     : skb->nh.iph->daddr);
-+	DP("flag: %s src: %u.%u.%u.%u dst: %u.%u.%u.%u",
-+	   flags & IPSET_SRC ? "SRC" : "DST",
-+	   NIPQUAD(skb->nh.iph->saddr),
-+	   NIPQUAD(skb->nh.iph->daddr));
-+
-+	if (ip < map->first_ip || ip > map->last_ip)
-+		return 0;
-+
-+	*hash_ip = ip;	
-+	DP("set: %s, ip:%u.%u.%u.%u, %u.%u.%u.%u",
-+	   set->name, HIPQUAD(ip), HIPQUAD(*hash_ip));		
-+	if (test_bit(IPSET_MACIP_ISSET, &table[ip - map->first_ip].flags)) {
-+		/* Is mac pointer valid?
-+		 * If so, compare... */
-+		return (skb->mac.raw >= skb->head
-+			&& (skb->mac.raw + ETH_HLEN) <= skb->data
-+			&& (memcmp(skb->mac.ethernet->h_source,
-+				   &table[ip - map->first_ip].ethernet,
-+				   ETH_ALEN) == 0));
-+	} else {
-+		return (map->flags & IPSET_MACIP_MATCHUNSET ? 1 : 0);
-+	}
-+}
-+
-+/* returns 0 on success */
-+static inline int
-+__addip(struct ip_set *set, 
-+	ip_set_ip_t ip, unsigned char *ethernet, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+	struct ip_set_macip *table =
-+	    (struct ip_set_macip *) map->members;
-+
-+	if (ip < map->first_ip || ip > map->last_ip)
-+		return -ERANGE;
-+	if (test_and_set_bit(IPSET_MACIP_ISSET, 
-+			     &table[ip - map->first_ip].flags))
-+		return -EEXIST;
-+
-+	*hash_ip = ip;
-+	DP("%u.%u.%u.%u, %u.%u.%u.%u", HIPQUAD(ip), HIPQUAD(*hash_ip));
-+	memcpy(&table[ip - map->first_ip].ethernet, ethernet, ETH_ALEN);
-+	return 0;
-+}
-+
-+static int
-+addip(struct ip_set *set, const void *data, size_t size,
-+      ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_macipmap *req =
-+	    (struct ip_set_req_macipmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_macipmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_macipmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __addip(set, req->ip, req->ethernet, hash_ip);
-+}
-+
-+static int
-+addip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	ip_set_ip_t ip;
-+	
-+	ip = ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr
-+				     : skb->nh.iph->daddr);
-+
-+	if (!(skb->mac.raw >= skb->head
-+	      && (skb->mac.raw + ETH_HLEN) <= skb->data))
-+		return -EINVAL;
-+
-+	return __addip(set, ip, skb->mac.ethernet->h_source, hash_ip);
-+}
-+
-+static inline int
-+__delip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+	struct ip_set_macip *table =
-+	    (struct ip_set_macip *) map->members;
-+
-+	if (ip < map->first_ip || ip > map->last_ip)
-+		return -ERANGE;
-+	if (!test_and_clear_bit(IPSET_MACIP_ISSET, 
-+				&table[ip - map->first_ip].flags))
-+		return -EEXIST;
-+
-+	*hash_ip = ip;
-+	DP("%u.%u.%u.%u, %u.%u.%u.%u", HIPQUAD(ip), HIPQUAD(*hash_ip));
-+	return 0;
-+}
-+
-+static int
-+delip(struct ip_set *set, const void *data, size_t size,
-+     ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_macipmap *req =
-+	    (struct ip_set_req_macipmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_macipmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_macipmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __delip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+delip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __delip(set,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       hash_ip);
-+}
-+
-+static inline size_t members_size(ip_set_id_t from, ip_set_id_t to)
-+{
-+	return (size_t)((to - from + 1) * sizeof(struct ip_set_macip));
-+}
-+
-+static int create(struct ip_set *set, const void *data, size_t size)
-+{
-+	int newbytes;
-+	struct ip_set_req_macipmap_create *req =
-+	    (struct ip_set_req_macipmap_create *) data;
-+	struct ip_set_macipmap *map;
-+
-+	if (size != sizeof(struct ip_set_req_macipmap_create)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_macipmap_create),
-+			      size);
-+		return -EINVAL;
-+	}
-+
-+	DP("from %u.%u.%u.%u to %u.%u.%u.%u",
-+	   HIPQUAD(req->from), HIPQUAD(req->to));
-+
-+	if (req->from > req->to) {
-+		DP("bad ip range");
-+		return -ENOEXEC;
-+	}
-+
-+	if (req->to - req->from > MAX_RANGE) {
-+		ip_set_printk("range too big (max %d addresses)",
-+			       MAX_RANGE);
-+		return -ENOEXEC;
-+	}
-+
-+	map = kmalloc(sizeof(struct ip_set_macipmap), GFP_KERNEL);
-+	if (!map) {
-+		DP("out of memory for %d bytes",
-+		   sizeof(struct ip_set_macipmap));
-+		return -ENOMEM;
-+	}
-+	map->flags = req->flags;
-+	map->first_ip = req->from;
-+	map->last_ip = req->to;
-+	newbytes = members_size(map->first_ip, map->last_ip);
-+	map->members = ip_set_malloc(newbytes);
-+	DP("members: %u %p", newbytes, map->members);
-+	if (!map->members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		kfree(map);
-+		return -ENOMEM;
-+	}
-+	memset(map->members, 0, newbytes);
-+	
-+	set->data = map;
-+	return 0;
-+}
-+
-+static void destroy(struct ip_set *set)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+
-+	ip_set_free(map->members, members_size(map->first_ip, map->last_ip));
-+	kfree(map);
-+
-+	set->data = NULL;
-+}
-+
-+static void flush(struct ip_set *set)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+	memset(map->members, 0, members_size(map->first_ip, map->last_ip));
-+}
-+
-+static void list_header(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+	struct ip_set_req_macipmap_create *header =
-+	    (struct ip_set_req_macipmap_create *) data;
-+
-+	DP("list_header %x %x %u", map->first_ip, map->last_ip,
-+	   map->flags);
-+
-+	header->from = map->first_ip;
-+	header->to = map->last_ip;
-+	header->flags = map->flags;
-+}
-+
-+static int list_members_size(const struct ip_set *set)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+
-+	DP("%u", members_size(map->first_ip, map->last_ip));
-+	return members_size(map->first_ip, map->last_ip);
-+}
-+
-+static void list_members(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+
-+	int bytes = members_size(map->first_ip, map->last_ip);
-+
-+	DP("members: %u %p", bytes, map->members);
-+	memcpy(data, map->members, bytes);
-+}
-+
-+static struct ip_set_type ip_set_macipmap = {
-+	.typename		= SETTYPE_NAME,
-+	.typecode		= IPSET_TYPE_IP,
-+	.protocol_version	= IP_SET_PROTOCOL_VERSION,
-+	.create			= &create,
-+	.destroy		= &destroy,
-+	.flush			= &flush,
-+	.reqsize		= sizeof(struct ip_set_req_macipmap),
-+	.addip			= &addip,
-+	.addip_kernel		= &addip_kernel,
-+	.delip			= &delip,
-+	.delip_kernel		= &delip_kernel,
-+	.testip			= &testip,
-+	.testip_kernel		= &testip_kernel,
-+	.header_size		= sizeof(struct ip_set_req_macipmap_create),
-+	.list_header		= &list_header,
-+	.list_members_size	= &list_members_size,
-+	.list_members		= &list_members,
-+	.me			= THIS_MODULE,
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("macipmap type of IP sets");
-+
-+static int __init init(void)
-+{
-+	return ip_set_register_set_type(&ip_set_macipmap);
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* FIXME: possible race with ip_set_create() */
-+	ip_set_unregister_set_type(&ip_set_macipmap);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Naur linux-old/net/ipv4/netfilter/ip_set_nethash.c linux-new/net/ipv4/netfilter/ip_set_nethash.c
---- linux-old/net/ipv4/netfilter/ip_set_nethash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/net/ipv4/netfilter/ip_set_nethash.c	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,450 @@
-+/* Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module implementing a cidr nethash set */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <asm/softirq.h>
-+#include <linux/spinlock.h>
-+#include <linux/vmalloc.h>
-+#include <linux/random.h>
-+
-+#include <net/ip.h>
-+
-+#include <linux/netfilter_ipv4/ip_set_malloc.h>
-+#include <linux/netfilter_ipv4/ip_set_nethash.h>
-+#include <linux/netfilter_ipv4/ip_set_jhash.h>
-+#include <linux/netfilter_ipv4/ip_set_prime.h>
-+
-+static inline __u32
-+jhash_ip(const struct ip_set_nethash *map, ip_set_ip_t ip)
-+{
-+	return jhash_1word(ip, map->initval);
-+}
-+
-+static inline __u32
-+randhash_ip(const struct ip_set_nethash *map, ip_set_ip_t ip)
-+{
-+	return (1 + ip % map->prime);
-+}
-+
-+static inline __u32
-+hash_id_cidr(struct ip_set_nethash *map,
-+	     ip_set_ip_t ip,
-+	     unsigned char cidr,
-+	     ip_set_ip_t *hash_ip)
-+{
-+	__u32 jhash, randhash, id;
-+	u_int16_t i;
-+
-+	*hash_ip = pack(ip, cidr);
-+	jhash = jhash_ip(map, *hash_ip);
-+	randhash = randhash_ip(map, *hash_ip);
-+	
-+	for (i = 0; i < map->probes; i++) {
-+		id = (jhash + i * randhash) % map->hashsize;
-+	   	DP("hash key: %u", id);
-+	   	if (map->members[id] == *hash_ip)
-+			return id;
-+	}
-+	return UINT_MAX;
-+}
-+
-+static inline __u32
-+hash_id(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	__u32 id = UINT_MAX;
-+	int i;
-+
-+	for (i = 0; i < 30 && map->cidr[i]; i++) {
-+		id = hash_id_cidr(map, ip, map->cidr[i], hash_ip);
-+		if (id != UINT_MAX)
-+			break;
-+	}
-+	return id;
-+}
-+
-+static inline int
-+__testip_cidr(struct ip_set *set, ip_set_ip_t ip, unsigned char cidr,
-+	      ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+
-+	return (hash_id_cidr(map, ip, cidr, hash_ip) != UINT_MAX);
-+}
-+
-+static inline int
-+__testip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	return (hash_id(set, ip, hash_ip) != UINT_MAX);
-+}
-+
-+static int
-+testip(struct ip_set *set, const void *data, size_t size,
-+       ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_nethash *req = 
-+	    (struct ip_set_req_nethash *) data;
-+
-+	if (size != sizeof(struct ip_set_req_nethash)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_nethash),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return (req->cidr == 32 ? __testip(set, req->ip, hash_ip)
-+		: __testip_cidr(set, req->ip, req->cidr, hash_ip));
-+}
-+
-+static int
-+testip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+		u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __testip(set,
-+			ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+						: skb->nh.iph->daddr),
-+			hash_ip);
-+}
-+
-+static inline int
-+__addip_base(struct ip_set_nethash *map, ip_set_ip_t ip)
-+{
-+	__u32 jhash, randhash, probe;
-+	u_int16_t i;
-+
-+	jhash = jhash_ip(map, ip);
-+	randhash = randhash_ip(map, ip);
-+	
-+	for (i = 0; i < map->probes; i++) {
-+		probe = (jhash + i * randhash) % map->hashsize;
-+		if (map->members[probe] == ip)
-+			return -EEXIST;
-+		if (!map->members[probe]) {
-+			map->members[probe] = ip;
-+			return 0;
-+		}
-+	}
-+	/* Trigger rehashing */
-+	return -EAGAIN;
-+}
-+
-+static inline int
-+__addip(struct ip_set_nethash *map, ip_set_ip_t ip, unsigned char cidr,
-+	ip_set_ip_t *hash_ip)
-+{
-+	*hash_ip = pack(ip, cidr);
-+	DP("%u.%u.%u.%u/%u, %u.%u.%u.%u", HIPQUAD(ip), cidr, HIPQUAD(*hash_ip));
-+	
-+	return __addip_base(map, *hash_ip);
-+}
-+
-+static void
-+update_cidr_sizes(struct ip_set_nethash *map, unsigned char cidr)
-+{
-+	unsigned char next;
-+	int i;
-+	
-+	for (i = 0; i < 30 && map->cidr[i]; i++) {
-+		if (map->cidr[i] == cidr) {
-+			return;
-+		} else if (map->cidr[i] < cidr) {
-+			next = map->cidr[i];
-+			map->cidr[i] = cidr;
-+			cidr = next;
-+		}
-+	}
-+	if (i < 30)
-+		map->cidr[i] = cidr;
-+}
-+
-+static int
-+addip(struct ip_set *set, const void *data, size_t size,
-+        ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_nethash *req = 
-+	    (struct ip_set_req_nethash *) data;
-+	int ret;
-+
-+	if (size != sizeof(struct ip_set_req_nethash)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_nethash),
-+			      size);
-+		return -EINVAL;
-+	}
-+	ret = __addip((struct ip_set_nethash *) set->data, 
-+		      req->ip, req->cidr, hash_ip);
-+	
-+	if (ret == 0)
-+		update_cidr_sizes((struct ip_set_nethash *) set->data,
-+				  req->cidr);
-+	
-+	return ret;
-+}
-+
-+static int
-+addip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	int ret = -ERANGE;
-+	ip_set_ip_t ip = ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr
-+						 : skb->nh.iph->daddr);
-+	
-+	if (map->cidr[0])
-+		ret = __addip(map, ip, map->cidr[0], hash_ip);
-+		
-+	return ret;
-+}
-+
-+static int retry(struct ip_set *set)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	ip_set_ip_t *members;
-+	u_int32_t i, hashsize;
-+	unsigned newbytes;
-+	int res;
-+	struct ip_set_nethash tmp = {
-+		.hashsize = map->hashsize,
-+		.probes = map->probes,
-+		.resize = map->resize
-+	};
-+	
-+	if (map->resize == 0)
-+		return -ERANGE;
-+
-+	memcpy(tmp.cidr, map->cidr, 30 * sizeof(unsigned char));
-+    again:
-+    	res = 0;
-+    	
-+	/* Calculate new parameters */
-+	get_random_bytes(&tmp.initval, 4);
-+	hashsize = tmp.hashsize + (tmp.hashsize * map->resize)/100;
-+	if (hashsize == tmp.hashsize)
-+		hashsize++;
-+	tmp.prime = make_prime(hashsize);
-+	
-+	ip_set_printk("rehashing of set %s triggered: "
-+		      "hashsize grows from %u to %u",
-+		      set->name, tmp.hashsize, hashsize);
-+	tmp.hashsize = hashsize;
-+	
-+	newbytes = hashsize * sizeof(ip_set_ip_t);
-+	tmp.members = ip_set_malloc(newbytes);
-+	if (!tmp.members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		return -ENOMEM;
-+	}
-+	memset(tmp.members, 0, newbytes);
-+	
-+	write_lock_bh(&set->lock);
-+	map = (struct ip_set_nethash *) set->data; /* Play safe */
-+	for (i = 0; i < map->hashsize && res == 0; i++) {
-+		if (map->members[i])
-+			res = __addip_base(&tmp, map->members[i]);
-+	}
-+	if (res) {
-+		/* Failure, try again */
-+		write_unlock_bh(&set->lock);
-+		ip_set_free(tmp.members, newbytes);
-+		goto again;
-+	}
-+	
-+	/* Success at resizing! */
-+	members = map->members;
-+	hashsize = map->hashsize;
-+	
-+	map->initval = tmp.initval;
-+	map->prime = tmp.prime;
-+	map->hashsize = tmp.hashsize;
-+	map->members = tmp.members;
-+	write_unlock_bh(&set->lock);
-+
-+	ip_set_free(members, hashsize * sizeof(ip_set_ip_t));
-+
-+	return 0;
-+}
-+
-+static inline int
-+__delip(struct ip_set_nethash *map, ip_set_ip_t ip, unsigned char cidr,
-+	ip_set_ip_t *hash_ip)
-+{
-+	ip_set_ip_t id = hash_id_cidr(map, ip, cidr, hash_ip);
-+
-+	if (id == UINT_MAX)
-+		return -EEXIST;
-+		
-+	map->members[id] = 0;
-+	return 0;
-+}
-+
-+static int
-+delip(struct ip_set *set, const void *data, size_t size,
-+        ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_nethash *req =
-+	    (struct ip_set_req_nethash *) data;
-+
-+	if (size != sizeof(struct ip_set_req_nethash)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_nethash),
-+			      size);
-+		return -EINVAL;
-+	}
-+	/* TODO: no garbage collection in map->cidr */		
-+	return __delip((struct ip_set_nethash *) set->data, 
-+		       req->ip, req->cidr, hash_ip);
-+}
-+
-+static int
-+delip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	       u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	int ret = -ERANGE;
-+	ip_set_ip_t ip = ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr
-+						 : skb->nh.iph->daddr);
-+	
-+	if (map->cidr[0])
-+		ret = __delip(map, ip, map->cidr[0], hash_ip);
-+	
-+	return ret;
-+}
-+
-+static int create(struct ip_set *set, const void *data, size_t size)
-+{
-+	unsigned newbytes;
-+	struct ip_set_req_nethash_create *req =
-+	    (struct ip_set_req_nethash_create *) data;
-+	struct ip_set_nethash *map;
-+
-+	if (size != sizeof(struct ip_set_req_nethash_create)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			       sizeof(struct ip_set_req_nethash_create),
-+			       size);
-+		return -EINVAL;
-+	}
-+
-+	if (req->hashsize < 1) {
-+		ip_set_printk("hashsize too small");
-+		return -ENOEXEC;
-+	}
-+
-+	map = kmalloc(sizeof(struct ip_set_nethash), GFP_KERNEL);
-+	if (!map) {
-+		DP("out of memory for %d bytes",
-+		   sizeof(struct ip_set_nethash));
-+		return -ENOMEM;
-+	}
-+	get_random_bytes(&map->initval, 4);
-+	map->prime = make_prime(req->hashsize);
-+	map->hashsize = req->hashsize;
-+	map->probes = req->probes;
-+	map->resize = req->resize;
-+	memset(map->cidr, 0, 30 * sizeof(unsigned char));
-+	newbytes = map->hashsize * sizeof(ip_set_ip_t);
-+	map->members = ip_set_malloc(newbytes);
-+	if (!map->members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		kfree(map);
-+		return -ENOMEM;
-+	}
-+	memset(map->members, 0, newbytes);
-+
-+	set->data = map;
-+	return 0;
-+}
-+
-+static void destroy(struct ip_set *set)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+
-+	ip_set_free(map->members, map->hashsize * sizeof(ip_set_ip_t));
-+	kfree(map);
-+
-+	set->data = NULL;
-+}
-+
-+static void flush(struct ip_set *set)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	memset(map->members, 0, map->hashsize * sizeof(ip_set_ip_t));
-+	memset(map->cidr, 0, 30 * sizeof(unsigned char));
-+}
-+
-+static void list_header(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	struct ip_set_req_nethash_create *header =
-+	    (struct ip_set_req_nethash_create *) data;
-+
-+	header->hashsize = map->hashsize;
-+	header->probes = map->probes;
-+	header->resize = map->resize;
-+}
-+
-+static int list_members_size(const struct ip_set *set)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+
-+	return (map->hashsize * sizeof(ip_set_ip_t));
-+}
-+
-+static void list_members(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	int bytes = map->hashsize * sizeof(ip_set_ip_t);
-+
-+	memcpy(data, map->members, bytes);
-+}
-+
-+static struct ip_set_type ip_set_nethash = {
-+	.typename		= SETTYPE_NAME,
-+	.typecode		= IPSET_TYPE_IP,
-+	.protocol_version	= IP_SET_PROTOCOL_VERSION,
-+	.create			= &create,
-+	.destroy		= &destroy,
-+	.flush			= &flush,
-+	.reqsize		= sizeof(struct ip_set_req_nethash),
-+	.addip			= &addip,
-+	.addip_kernel		= &addip_kernel,
-+	.retry			= &retry,
-+	.delip			= &delip,
-+	.delip_kernel		= &delip_kernel,
-+	.testip			= &testip,
-+	.testip_kernel		= &testip_kernel,
-+	.header_size		= sizeof(struct ip_set_req_nethash_create),
-+	.list_header		= &list_header,
-+	.list_members_size	= &list_members_size,
-+	.list_members		= &list_members,
-+	.me			= THIS_MODULE,
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("nethash type of IP sets");
-+
-+static int __init init(void)
-+{
-+	return ip_set_register_set_type(&ip_set_nethash);
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* FIXME: possible race with ip_set_create() */
-+	ip_set_unregister_set_type(&ip_set_nethash);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Naur linux-old/net/ipv4/netfilter/ip_set_portmap.c linux-new/net/ipv4/netfilter/ip_set_portmap.c
---- linux-old/net/ipv4/netfilter/ip_set_portmap.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/net/ipv4/netfilter/ip_set_portmap.c	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,321 @@
-+/* Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module implementing a port set type as a bitmap */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <linux/udp.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <asm/softirq.h>
-+#include <linux/spinlock.h>
-+
-+#include <net/ip.h>
-+
-+#include <linux/netfilter_ipv4/ip_set_portmap.h>
-+
-+static inline ip_set_ip_t
-+get_port(const struct sk_buff *skb, u_int32_t flags)
-+{
-+	struct iphdr *iph = skb->nh.iph;
-+	u_int16_t offset = ntohs(iph->frag_off) & IP_OFFSET;
-+
-+	switch (iph->protocol) {
-+	case IPPROTO_TCP: {
-+		struct tcphdr *tcph = (struct tcphdr *)((u_int32_t *)iph + iph->ihl);
-+		
-+		/* See comments at tcp_match in ip_tables.c */
-+		if (offset != 0
-+		    || (offset == 0
-+		        && (skb->len - iph->ihl * 4) < sizeof(struct tcphdr)))
-+			return INVALID_PORT;
-+
-+	     	return ntohs(flags & IPSET_SRC ?
-+			     tcph->source : tcph->dest);
-+	    }
-+	case IPPROTO_UDP: {
-+		struct udphdr *udph = (struct udphdr *)((u_int32_t *)iph + iph->ihl);
-+
-+		if (offset != 0
-+		    || (offset == 0
-+		        && (skb->len - iph->ihl * 4) < sizeof(struct udphdr)))
-+			return INVALID_PORT;
-+
-+	     	return ntohs(flags & IPSET_SRC ?
-+			     udph->source : udph->dest);
-+	    }
-+	default:
-+		return INVALID_PORT;
-+	}
-+}
-+
-+static inline int
-+__testport(struct ip_set *set, ip_set_ip_t port, ip_set_ip_t *hash_port)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+
-+	if (port < map->first_port || port > map->last_port)
-+		return -ERANGE;
-+		
-+	*hash_port = port;
-+	DP("set: %s, port:%u, %u", set->name, port, *hash_port);
-+	return !!test_bit(port - map->first_port, map->members);
-+}
-+
-+static int
-+testport(struct ip_set *set, const void *data, size_t size,
-+         ip_set_ip_t *hash_port)
-+{
-+	struct ip_set_req_portmap *req = 
-+	    (struct ip_set_req_portmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_portmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_portmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __testport(set, req->port, hash_port);
-+}
-+
-+static int
-+testport_kernel(struct ip_set *set, const struct sk_buff *skb,
-+		u_int32_t flags, ip_set_ip_t *hash_port)
-+{
-+	int res;
-+	ip_set_ip_t port = get_port(skb, flags);
-+
-+	DP("flag %s port %u", flags & IPSET_SRC ? "SRC" : "DST", port);	
-+	if (port == INVALID_PORT)
-+		return 0;	
-+
-+	res =  __testport(set, port, hash_port);
-+	
-+	return (res < 0 ? 0 : res);
-+}
-+
-+static inline int
-+__addport(struct ip_set *set, ip_set_ip_t port, ip_set_ip_t *hash_port)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+
-+	if (port < map->first_port || port > map->last_port)
-+		return -ERANGE;
-+	if (test_and_set_bit(port - map->first_port, map->members))
-+		return -EEXIST;
-+		
-+	*hash_port = port;
-+	DP("port %u", port);
-+	return 0;
-+}
-+
-+static int
-+addport(struct ip_set *set, const void *data, size_t size,
-+        ip_set_ip_t *hash_port)
-+{
-+	struct ip_set_req_portmap *req = 
-+	    (struct ip_set_req_portmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_portmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_portmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __addport(set, req->port, hash_port);
-+}
-+
-+static int
-+addport_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	       u_int32_t flags, ip_set_ip_t *hash_port)
-+{
-+	ip_set_ip_t port = get_port(skb, flags);
-+	
-+	if (port == INVALID_PORT)
-+		return -EINVAL;
-+
-+	return __addport(set, port, hash_port);
-+}
-+
-+static inline int
-+__delport(struct ip_set *set, ip_set_ip_t port, ip_set_ip_t *hash_port)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+
-+	if (port < map->first_port || port > map->last_port)
-+		return -ERANGE;
-+	if (!test_and_clear_bit(port - map->first_port, map->members))
-+		return -EEXIST;
-+		
-+	*hash_port = port;
-+	DP("port %u", port);
-+	return 0;
-+}
-+
-+static int
-+delport(struct ip_set *set, const void *data, size_t size,
-+        ip_set_ip_t *hash_port)
-+{
-+	struct ip_set_req_portmap *req =
-+	    (struct ip_set_req_portmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_portmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_portmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __delport(set, req->port, hash_port);
-+}
-+
-+static int
-+delport_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	       u_int32_t flags, ip_set_ip_t *hash_port)
-+{
-+	ip_set_ip_t port = get_port(skb, flags);
-+	
-+	if (port == INVALID_PORT)
-+		return -EINVAL;
-+
-+	return __delport(set, port, hash_port);
-+}
-+
-+static int create(struct ip_set *set, const void *data, size_t size)
-+{
-+	int newbytes;
-+	struct ip_set_req_portmap_create *req =
-+	    (struct ip_set_req_portmap_create *) data;
-+	struct ip_set_portmap *map;
-+
-+	if (size != sizeof(struct ip_set_req_portmap_create)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			       sizeof(struct ip_set_req_portmap_create),
-+			       size);
-+		return -EINVAL;
-+	}
-+
-+	DP("from %u to %u", req->from, req->to);
-+
-+	if (req->from > req->to) {
-+		DP("bad port range");
-+		return -ENOEXEC;
-+	}
-+
-+	if (req->to - req->from > MAX_RANGE) {
-+		ip_set_printk("range too big (max %d ports)",
-+			       MAX_RANGE);
-+		return -ENOEXEC;
-+	}
-+
-+	map = kmalloc(sizeof(struct ip_set_portmap), GFP_KERNEL);
-+	if (!map) {
-+		DP("out of memory for %d bytes",
-+		   sizeof(struct ip_set_portmap));
-+		return -ENOMEM;
-+	}
-+	map->first_port = req->from;
-+	map->last_port = req->to;
-+	newbytes = bitmap_bytes(req->from, req->to);
-+	map->members = kmalloc(newbytes, GFP_KERNEL);
-+	if (!map->members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		kfree(map);
-+		return -ENOMEM;
-+	}
-+	memset(map->members, 0, newbytes);
-+
-+	set->data = map;
-+	return 0;
-+}
-+
-+static void destroy(struct ip_set *set)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+
-+	kfree(map->members);
-+	kfree(map);
-+
-+	set->data = NULL;
-+}
-+
-+static void flush(struct ip_set *set)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+	memset(map->members, 0, bitmap_bytes(map->first_port, map->last_port));
-+}
-+
-+static void list_header(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+	struct ip_set_req_portmap_create *header =
-+	    (struct ip_set_req_portmap_create *) data;
-+
-+	DP("list_header %u %u", map->first_port, map->last_port);
-+
-+	header->from = map->first_port;
-+	header->to = map->last_port;
-+}
-+
-+static int list_members_size(const struct ip_set *set)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+
-+	return bitmap_bytes(map->first_port, map->last_port);
-+}
-+
-+static void list_members(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+	int bytes = bitmap_bytes(map->first_port, map->last_port);
-+
-+	memcpy(data, map->members, bytes);
-+}
-+
-+static struct ip_set_type ip_set_portmap = {
-+	.typename		= SETTYPE_NAME,
-+	.typecode		= IPSET_TYPE_PORT,
-+	.protocol_version	= IP_SET_PROTOCOL_VERSION,
-+	.create			= &create,
-+	.destroy		= &destroy,
-+	.flush			= &flush,
-+	.reqsize		= sizeof(struct ip_set_req_portmap),
-+	.addip			= &addport,
-+	.addip_kernel		= &addport_kernel,
-+	.delip			= &delport,
-+	.delip_kernel		= &delport_kernel,
-+	.testip			= &testport,
-+	.testip_kernel		= &testport_kernel,
-+	.header_size		= sizeof(struct ip_set_req_portmap_create),
-+	.list_header		= &list_header,
-+	.list_members_size	= &list_members_size,
-+	.list_members		= &list_members,
-+	.me			= THIS_MODULE,
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("portmap type of IP sets");
-+
-+static int __init init(void)
-+{
-+	return ip_set_register_set_type(&ip_set_portmap);
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* FIXME: possible race with ip_set_create() */
-+	ip_set_unregister_set_type(&ip_set_portmap);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Naur linux-old/net/ipv4/netfilter/ipt_set.c linux-new/net/ipv4/netfilter/ipt_set.c
---- linux-old/net/ipv4/netfilter/ipt_set.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/net/ipv4/netfilter/ipt_set.c	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,114 @@
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ *                         Patrick Schaaf <bof@bof.de>
-+ *                         Martin Josefsson <gandalf@wlug.westbo.se>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module to match an IP set. */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/netfilter_ipv4/ipt_set.h>
-+
-+static inline int
-+match_set(const struct ipt_set_info *info,
-+	  const struct sk_buff *skb,
-+	  int inv)
-+{	
-+	if (ip_set_testip_kernel(info->index, skb, info->flags))
-+		inv = !inv;
-+	return inv;
-+}
-+
-+static int
-+match(const struct sk_buff *skb,
-+      const struct net_device *in,
-+      const struct net_device *out,
-+      const void *matchinfo,
-+      int offset,
-+      const void *hdr,
-+      u_int16_t datalen,
-+      int *hotdrop)
-+{
-+	const struct ipt_set_info_match *info = matchinfo;
-+		
-+	return match_set(&info->match_set,
-+			 skb,
-+			 info->match_set.flags[0] & IPSET_MATCH_INV);
-+}
-+
-+static int
-+checkentry(const char *tablename,
-+	   const struct ipt_ip *ip,
-+	   void *matchinfo,
-+	   unsigned int matchsize,
-+	   unsigned int hook_mask)
-+{
-+	struct ipt_set_info_match *info = 
-+		(struct ipt_set_info_match *) matchinfo;
-+	ip_set_id_t index;
-+
-+	if (matchsize != IPT_ALIGN(sizeof(struct ipt_set_info_match))) {
-+		ip_set_printk("invalid matchsize %d", matchsize);
-+		return 0;
-+	}
-+
-+	index = ip_set_get_byindex(info->match_set.index);
-+		
-+	if (index == IP_SET_INVALID_ID) {
-+		ip_set_printk("Cannot find set indentified by id %u to match",
-+			      info->match_set.index);
-+		return 0;	/* error */
-+	}
-+	if (info->match_set.flags[IP_SET_MAX_BINDINGS] != 0) {
-+		ip_set_printk("That's nasty!");
-+		return 0;	/* error */
-+	}
-+
-+	return 1;
-+}
-+
-+static void destroy(void *matchinfo, unsigned int matchsize)
-+{
-+	struct ipt_set_info_match *info = matchinfo;
-+
-+	if (matchsize != IPT_ALIGN(sizeof(struct ipt_set_info_match))) {
-+		ip_set_printk("invalid matchsize %d", matchsize);
-+		return;
-+	}
-+
-+	ip_set_put(info->match_set.index);
-+}
-+
-+static struct ipt_match set_match = {
-+	.name		= "set",
-+	.match		= &match,
-+	.checkentry	= &checkentry,
-+	.destroy	= &destroy,
-+	.me		= THIS_MODULE
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("iptables IP set match module");
-+
-+static int __init init(void)
-+{
-+	return ipt_register_match(&set_match);
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_match(&set_match);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Naur linux-old/net/ipv4/netfilter/ipt_SET.c linux-new/net/ipv4/netfilter/ipt_SET.c
---- linux-old/net/ipv4/netfilter/ipt_SET.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-new/net/ipv4/netfilter/ipt_SET.c	2005-08-10 22:13:00.000000000 +0200
-@@ -0,0 +1,127 @@
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ *                         Patrick Schaaf <bof@bof.de>
-+ *                         Martin Josefsson <gandalf@wlug.westbo.se>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* ipt_SET.c - netfilter target to manipulate IP sets */
-+
-+#include <linux/types.h>
-+#include <linux/ip.h>
-+#include <linux/timer.h>
-+#include <linux/module.h>
-+#include <linux/netfilter.h>
-+#include <linux/netdevice.h>
-+#include <linux/if.h>
-+#include <linux/inetdevice.h>
-+#include <net/protocol.h>
-+#include <net/checksum.h>
-+#include <linux/netfilter_ipv4.h>
-+#include <linux/netfilter_ipv4/ip_nat_rule.h>
-+#include <linux/netfilter_ipv4/ipt_set.h>
-+
-+static unsigned int
-+target(struct sk_buff **pskb,
-+       unsigned int hooknum,
-+       const struct net_device *in,
-+       const struct net_device *out,
-+       const void *targinfo,
-+       void *userinfo)
-+{
-+	const struct ipt_set_info_target *info = targinfo;
-+	
-+	if (info->add_set.index != IP_SET_INVALID_ID)
-+		ip_set_addip_kernel(info->add_set.index,
-+				    *pskb,
-+				    info->add_set.flags);
-+	if (info->del_set.index != IP_SET_INVALID_ID)
-+		ip_set_delip_kernel(info->del_set.index,
-+				    *pskb,
-+				    info->del_set.flags);
-+
-+	return IPT_CONTINUE;
-+}
-+
-+static int
-+checkentry(const char *tablename,
-+	   const struct ipt_entry *e,
-+	   void *targinfo,
-+	   unsigned int targinfosize, unsigned int hook_mask)
-+{
-+	struct ipt_set_info_target *info = 
-+		(struct ipt_set_info_target *) targinfo;
-+	ip_set_id_t index;
-+
-+	if (targinfosize != IPT_ALIGN(sizeof(*info))) {
-+		DP("bad target info size %u", targinfosize);
-+		return 0;
-+	}
-+
-+	if (info->add_set.index != IP_SET_INVALID_ID) {
-+		index = ip_set_get_byindex(info->add_set.index);
-+		if (index == IP_SET_INVALID_ID) {
-+			ip_set_printk("cannot find add_set index %u as target",
-+				      info->add_set.index);
-+			return 0;	/* error */
-+		}
-+	}
-+
-+	if (info->del_set.index != IP_SET_INVALID_ID) {
-+		index = ip_set_get_byindex(info->del_set.index);
-+		if (index == IP_SET_INVALID_ID) {
-+			ip_set_printk("cannot find del_set index %u as target",
-+				      info->del_set.index);
-+			return 0;	/* error */
-+		}
-+	}
-+	if (info->add_set.flags[IP_SET_MAX_BINDINGS] != 0
-+	    || info->del_set.flags[IP_SET_MAX_BINDINGS] != 0) {
-+		ip_set_printk("That's nasty!");
-+		return 0;	/* error */
-+	}
-+	return 1;
-+}
-+
-+static void destroy(void *targetinfo, unsigned int targetsize)
-+{
-+	struct ipt_set_info_target *info = targetinfo;
-+
-+	if (targetsize != IPT_ALIGN(sizeof(struct ipt_set_info_target))) {
-+		ip_set_printk("invalid targetsize %d", targetsize);
-+		return;
-+	}
-+
-+	if (info->add_set.index != IP_SET_INVALID_ID)
-+		ip_set_put(info->add_set.index);
-+	if (info->del_set.index != IP_SET_INVALID_ID)
-+		ip_set_put(info->del_set.index);
-+}
-+
-+static struct ipt_target SET_target = {
-+	.name 		= "SET",
-+	.target 	= target,
-+	.checkentry 	= checkentry,
-+	.destroy 	= destroy,
-+	.me 		= THIS_MODULE
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("iptables IP set target module");
-+
-+static int __init init(void)
-+{
-+	return ipt_register_target(&SET_target);
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_target(&SET_target);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Naur linux-old/net/ipv4/netfilter/Makefile linux-new/net/ipv4/netfilter/Makefile
---- linux-old/net/ipv4/netfilter/Makefile	2005-07-23 23:34:46.000000000 +0200
-+++ linux-new/net/ipv4/netfilter/Makefile	2005-08-10 22:13:01.000000000 +0200
-@@ -75,6 +75,18 @@
- obj-$(CONFIG_IP_NF_MATCH_HELPER) += ipt_helper.o
- obj-$(CONFIG_IP_NF_MATCH_LIMIT) += ipt_limit.o
- obj-$(CONFIG_IP_NF_MATCH_MARK) += ipt_mark.o
-+obj-$(CONFIG_IP_NF_MATCH_SET) += ipt_set.o
-+obj-$(CONFIG_IP_NF_TARGET_SET) += ipt_SET.o
-+ifdef CONFIG_IP_NF_SET
-+	obj-$(CONFIG_IP_NF_SET) += ip_set.o
-+	export-objs += ip_set.o
-+endif
-+obj-$(CONFIG_IP_NF_SET_IPMAP) += ip_set_ipmap.o
-+obj-$(CONFIG_IP_NF_SET_PORTMAP) += ip_set_portmap.o
-+obj-$(CONFIG_IP_NF_SET_MACIPMAP) += ip_set_macipmap.o
-+obj-$(CONFIG_IP_NF_SET_IPHASH) += ip_set_iphash.o
-+obj-$(CONFIG_IP_NF_SET_NETHASH) += ip_set_nethash.o
-+obj-$(CONFIG_IP_NF_SET_IPTREE) += ip_set_iptree.o
- obj-$(CONFIG_IP_NF_MATCH_MAC) += ipt_mac.o
- obj-$(CONFIG_IP_NF_MATCH_IPP2P) += ipt_ipp2p.o
- 
diff --git a/openwrt/target/linux/generic-2.4/patches/609-netfilter_string.patch b/openwrt/target/linux/generic-2.4/patches/609-netfilter_string.patch
deleted file mode 100644
index c8e1a2d2de..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/609-netfilter_string.patch
+++ /dev/null
@@ -1,348 +0,0 @@
-diff -Nur linux-2.4.32/include/linux/netfilter_ipv4/ipt_string.h linux-2.4.32.patch/include/linux/netfilter_ipv4/ipt_string.h
---- linux-2.4.32/include/linux/netfilter_ipv4/ipt_string.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.patch/include/linux/netfilter_ipv4/ipt_string.h	2005-12-16 00:40:19.082509250 +0100
-@@ -0,0 +1,18 @@
-+#ifndef _IPT_STRING_H
-+#define _IPT_STRING_H
-+
-+#define IPT_STRING_MAX_PATTERN_SIZE 128
-+#define IPT_STRING_MAX_ALGO_NAME_SIZE 16
-+
-+struct ipt_string_info
-+{
-+	u_int16_t from_offset;
-+	u_int16_t to_offset;
-+	char	  algo[IPT_STRING_MAX_ALGO_NAME_SIZE];
-+	char 	  pattern[IPT_STRING_MAX_PATTERN_SIZE];
-+	u_int8_t  patlen;
-+	u_int8_t  invert;
-+	struct ts_config __attribute__((aligned(8))) *config;
-+};
-+
-+#endif /*_IPT_STRING_H*/
-diff -Nur linux-2.4.32/include/linux/textsearch.h linux-2.4.32.patch/include/linux/textsearch.h
---- linux-2.4.32/include/linux/textsearch.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.patch/include/linux/textsearch.h	2005-12-16 11:15:34.838073000 +0100
-@@ -0,0 +1,205 @@
-+#ifndef __LINUX_TEXTSEARCH_H
-+#define __LINUX_TEXTSEARCH_H
-+
-+#ifdef __KERNEL__
-+
-+#include <linux/types.h>
-+#include <linux/list.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+
-+#ifdef __CHECKER__
-+#define __bitwise__ __attribute__((bitwise))
-+#else
-+#define __bitwise__
-+#endif
-+#ifdef __CHECK_ENDIAN__
-+#define __bitwise __bitwise__
-+#else
-+#define __bitwise
-+#endif
-+
-+typedef __u16 __bitwise __le16;
-+typedef __u16 __bitwise __be16;
-+typedef __u32 __bitwise __le32;
-+typedef __u32 __bitwise __be32;
-+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-+typedef __u64 __bitwise __le64;
-+typedef __u64 __bitwise __be64;
-+#endif
-+
-+#ifdef __KERNEL__
-+typedef unsigned __bitwise__ gfp_t;
-+#endif
-+
-+struct ts_config;
-+
-+/**
-+ * TS_AUTOLOAD - Automatically load textsearch modules when needed
-+ */
-+#define TS_AUTOLOAD	1
-+
-+/**
-+ * struct ts_state - search state
-+ * @offset: offset for next match
-+ * @cb: control buffer, for persistant variables of get_next_block()
-+ */
-+struct ts_state
-+{
-+	unsigned int		offset;
-+	char			cb[40];
-+};
-+
-+/**
-+ * struct ts_ops - search module operations
-+ * @name: name of search algorithm
-+ * @init: initialization function to prepare a search
-+ * @find: find the next occurrence of the pattern
-+ * @destroy: destroy algorithm specific parts of a search configuration
-+ * @get_pattern: return head of pattern
-+ * @get_pattern_len: return length of pattern
-+ * @owner: module reference to algorithm
-+ */
-+struct ts_ops
-+{
-+	const char		*name;
-+	struct ts_config *	(*init)(const void *, unsigned int, gfp_t);
-+	unsigned int		(*find)(struct ts_config *,
-+					struct ts_state *);
-+	void			(*destroy)(struct ts_config *);
-+	void *			(*get_pattern)(struct ts_config *);
-+	unsigned int		(*get_pattern_len)(struct ts_config *);
-+	struct module		*owner;
-+	struct list_head	list;
-+};
-+
-+/**
-+ * struct ts_config - search configuration
-+ * @ops: operations of chosen algorithm
-+ * @get_next_block: callback to fetch the next block to search in
-+ * @finish: callback to finalize a search
-+ */
-+struct ts_config
-+{
-+	struct ts_ops		*ops;
-+
-+	/**
-+	 * get_next_block - fetch next block of data
-+	 * @consumed: number of bytes consumed by the caller
-+	 * @dst: destination buffer
-+	 * @conf: search configuration
-+	 * @state: search state
-+	 *
-+	 * Called repeatedly until 0 is returned. Must assign the
-+	 * head of the next block of data to &*dst and return the length
-+	 * of the block or 0 if at the end. consumed == 0 indicates
-+	 * a new search. May store/read persistant values in state->cb.
-+	 */
-+	unsigned int		(*get_next_block)(unsigned int consumed,
-+						  const u8 **dst,
-+						  struct ts_config *conf,
-+						  struct ts_state *state);
-+
-+	/**
-+	 * finish - finalize/clean a series of get_next_block() calls
-+	 * @conf: search configuration
-+	 * @state: search state
-+	 *
-+	 * Called after the last use of get_next_block(), may be used
-+	 * to cleanup any leftovers.
-+	 */
-+	void			(*finish)(struct ts_config *conf,
-+					  struct ts_state *state);
-+};
-+
-+/**
-+ * textsearch_next - continue searching for a pattern
-+ * @conf: search configuration
-+ * @state: search state
-+ *
-+ * Continues a search looking for more occurrences of the pattern.
-+ * textsearch_find() must be called to find the first occurrence
-+ * in order to reset the state.
-+ *
-+ * Returns the position of the next occurrence of the pattern or
-+ * UINT_MAX if not match was found.
-+ */ 
-+static inline unsigned int textsearch_next(struct ts_config *conf,
-+					   struct ts_state *state)
-+{
-+	unsigned int ret = conf->ops->find(conf, state);
-+
-+	if (conf->finish)
-+		conf->finish(conf, state);
-+
-+	return ret;
-+}
-+
-+/**
-+ * textsearch_find - start searching for a pattern
-+ * @conf: search configuration
-+ * @state: search state
-+ *
-+ * Returns the position of first occurrence of the pattern or
-+ * UINT_MAX if no match was found.
-+ */ 
-+static inline unsigned int textsearch_find(struct ts_config *conf,
-+					   struct ts_state *state)
-+{
-+	state->offset = 0;
-+	return textsearch_next(conf, state);
-+}
-+
-+/**
-+ * textsearch_get_pattern - return head of the pattern
-+ * @conf: search configuration
-+ */
-+static inline void *textsearch_get_pattern(struct ts_config *conf)
-+{
-+	return conf->ops->get_pattern(conf);
-+}
-+
-+/**
-+ * textsearch_get_pattern_len - return length of the pattern
-+ * @conf: search configuration
-+ */
-+static inline unsigned int textsearch_get_pattern_len(struct ts_config *conf)
-+{
-+	return conf->ops->get_pattern_len(conf);
-+}
-+
-+extern int textsearch_register(struct ts_ops *);
-+extern int textsearch_unregister(struct ts_ops *);
-+extern struct ts_config *textsearch_prepare(const char *, const void *,
-+					    unsigned int, gfp_t, int);
-+extern void textsearch_destroy(struct ts_config *conf);
-+extern unsigned int textsearch_find_continuous(struct ts_config *,
-+					       struct ts_state *,
-+					       const void *, unsigned int);
-+
-+
-+#define TS_PRIV_ALIGNTO	8
-+#define TS_PRIV_ALIGN(len) (((len) + TS_PRIV_ALIGNTO-1) & ~(TS_PRIV_ALIGNTO-1))
-+
-+static inline struct ts_config *alloc_ts_config(size_t payload,
-+						gfp_t gfp_mask)
-+{
-+	struct ts_config *conf;
-+
-+	conf = kmalloc(TS_PRIV_ALIGN(sizeof(*conf)) + payload, gfp_mask);
-+	if (conf == NULL)
-+		return -ENOMEM;
-+
-+	memset(conf, 0, TS_PRIV_ALIGN(sizeof(*conf)) + payload);
-+	return conf;
-+}
-+
-+static inline void *ts_config_priv(struct ts_config *conf)
-+{
-+	return ((u8 *) conf + TS_PRIV_ALIGN(sizeof(struct ts_config)));
-+}
-+
-+#endif /* __KERNEL__ */
-+
-+#endif
-diff -Nur linux-2.4.32/net/ipv4/netfilter/Config.in linux-2.4.32.patch/net/ipv4/netfilter/Config.in
---- linux-2.4.32/net/ipv4/netfilter/Config.in	2005-01-19 15:10:13.000000000 +0100
-+++ linux-2.4.32.patch/net/ipv4/netfilter/Config.in	2005-12-16 00:41:43.023755250 +0100
-@@ -42,6 +42,7 @@
-   fi
-   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-     dep_tristate '  Unclean match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_UNCLEAN $CONFIG_IP_NF_IPTABLES
-+    dep_tristate '  String match support (EXPERIMENTAL) ' CONFIG_IP_NF_MATCH_STRING $CONFIG_IP_NF_IPTABLES
-     dep_tristate '  Owner match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_OWNER $CONFIG_IP_NF_IPTABLES
-   fi
- # The targets
-diff -Nur linux-2.4.32/net/ipv4/netfilter/ipt_string.c linux-2.4.32.patch/net/ipv4/netfilter/ipt_string.c
---- linux-2.4.32/net/ipv4/netfilter/ipt_string.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.patch/net/ipv4/netfilter/ipt_string.c	2005-12-16 00:40:48.436343750 +0100
-@@ -0,0 +1,91 @@
-+/* String matching match for iptables
-+ * 
-+ * (C) 2005 Pablo Neira Ayuso <pablo@eurodev.net>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ipt_string.h>
-+#include <linux/textsearch.h>
-+
-+MODULE_AUTHOR("Pablo Neira Ayuso <pablo@eurodev.net>");
-+MODULE_DESCRIPTION("IP tables string match module");
-+MODULE_LICENSE("GPL");
-+
-+static int match(const struct sk_buff *skb,
-+		 const struct net_device *in,
-+		 const struct net_device *out,
-+		 const void *matchinfo,
-+		 int offset,
-+		 int *hotdrop)
-+{
-+	struct ts_state state;
-+	struct ipt_string_info *conf = (struct ipt_string_info *) matchinfo;
-+
-+	memset(&state, 0, sizeof(struct ts_state));
-+
-+	return (skb_find_text((struct sk_buff *)skb, conf->from_offset, 
-+			     conf->to_offset, conf->config, &state) 
-+			     != UINT_MAX) && !conf->invert;
-+}
-+
-+#define STRING_TEXT_PRIV(m) ((struct ipt_string_info *) m)
-+
-+static int checkentry(const char *tablename,
-+		      const struct ipt_ip *ip,
-+		      void *matchinfo,
-+		      unsigned int matchsize,
-+		      unsigned int hook_mask)
-+{
-+	struct ipt_string_info *conf = matchinfo;
-+	struct ts_config *ts_conf;
-+
-+	if (matchsize != IPT_ALIGN(sizeof(struct ipt_string_info)))
-+		return 0;
-+
-+	/* Damn, can't handle this case properly with iptables... */
-+	if (conf->from_offset > conf->to_offset)
-+		return 0;
-+
-+	ts_conf = textsearch_prepare(conf->algo, conf->pattern, conf->patlen,
-+				     GFP_KERNEL, TS_AUTOLOAD);
-+	if (IS_ERR(ts_conf))
-+		return 0;
-+
-+	conf->config = ts_conf;
-+
-+	return 1;
-+}
-+
-+static void destroy(void *matchinfo, unsigned int matchsize)
-+{
-+	textsearch_destroy(STRING_TEXT_PRIV(matchinfo)->config);
-+}
-+
-+static struct ipt_match string_match = {
-+	.name 		= "string",
-+	.match 		= match,
-+	.checkentry	= checkentry,
-+	.destroy 	= destroy,
-+	.me 		= THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+	return ipt_register_match(&string_match);
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_match(&string_match);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Nur linux-2.4.32/net/ipv4/netfilter/Makefile linux-2.4.32.patch/net/ipv4/netfilter/Makefile
---- linux-2.4.32/net/ipv4/netfilter/Makefile	2003-08-25 13:44:44.000000000 +0200
-+++ linux-2.4.32.patch/net/ipv4/netfilter/Makefile	2005-12-16 00:42:10.929499250 +0100
-@@ -85,6 +85,7 @@
- obj-$(CONFIG_IP_NF_MATCH_STATE) += ipt_state.o
- obj-$(CONFIG_IP_NF_MATCH_CONNTRACK) += ipt_conntrack.o
- obj-$(CONFIG_IP_NF_MATCH_UNCLEAN) += ipt_unclean.o
-+obj-$(CONFIG_IP_NF_MATCH_STRING) += ipt_string.o
- obj-$(CONFIG_IP_NF_MATCH_TCPMSS) += ipt_tcpmss.o
- 
- # targets
diff --git a/openwrt/target/linux/generic-2.4/patches/610-netfilter_connbytes.patch b/openwrt/target/linux/generic-2.4/patches/610-netfilter_connbytes.patch
deleted file mode 100644
index 95bc10f2bc..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/610-netfilter_connbytes.patch
+++ /dev/null
@@ -1,439 +0,0 @@
---- linux/net/ipv4/netfilter/Config.in.org	2005-11-13 15:53:59.457222512 +0100
-+++ linux/net/ipv4/netfilter/Config.in	2005-11-13 15:56:25.241060000 +0100
-@@ -11,6 +11,8 @@
-   dep_tristate '  Amanda protocol support' CONFIG_IP_NF_AMANDA $CONFIG_IP_NF_CONNTRACK
-   dep_tristate '  TFTP protocol support' CONFIG_IP_NF_TFTP $CONFIG_IP_NF_CONNTRACK
-   dep_tristate '  IRC protocol support' CONFIG_IP_NF_IRC $CONFIG_IP_NF_CONNTRACK
-+  dep_tristate '  Connection tracking flow accounting' CONFIG_IP_NF_CT_ACCT $CONFIG_IP_NF_CONNTRACK
-+  dep_tristate '  Connection byte counter support' CONFIG_IP_NF_MATCH_CONNBYTES $CONFIG_IP_NF_CT_ACCT $CONFIG_IP_NF_CONNTRACK $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  GRE protocol support' CONFIG_IP_NF_CT_PROTO_GRE $CONFIG_IP_NF_CONNTRACK
-   dep_tristate '   PPTP protocol support' CONFIG_IP_NF_PPTP $CONFIG_IP_NF_CT_PROTO_GRE
- fi
---- linux/net/ipv4/netfilter/Makefile.org	2005-11-12 16:48:38.000000000 +0100
-+++ linux/net/ipv4/netfilter/Makefile	2005-11-13 15:56:38.663019552 +0100
-@@ -94,6 +94,7 @@
- obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o
- obj-$(CONFIG_IP_NF_MATCH_STATE) += ipt_state.o
- obj-$(CONFIG_IP_NF_MATCH_CONNMARK) += ipt_connmark.o
-+obj-$(CONFIG_IP_NF_MATCH_CONNBYTES) += ipt_connbytes.o
- obj-$(CONFIG_IP_NF_MATCH_CONNTRACK) += ipt_conntrack.o
- obj-$(CONFIG_IP_NF_MATCH_UNCLEAN) += ipt_unclean.o
- obj-$(CONFIG_IP_NF_MATCH_TCPMSS) += ipt_tcpmss.o
---- linux/net/ipv4/netfilter/ip_conntrack_amanda.c.org	2004-02-18 14:36:32.000000000 +0100
-+++ linux/net/ipv4/netfilter/ip_conntrack_amanda.c	2005-11-13 15:40:00.000000000 +0100
-@@ -75,7 +75,7 @@
- 
- 	/* increase the UDP timeout of the master connection as replies from
- 	 * Amanda clients to the server can be quite delayed */
--	ip_ct_refresh(ct, master_timeout * HZ);
-+	ip_ct_refresh_acct(ct,ctinfo,NULL, master_timeout * HZ);
- 	
- 	/* Search for "CONNECT " string */
- 	do {
---- linux/net/ipv4/netfilter/ip_conntrack_proto_tcp.c.org	2003-11-28 19:26:21.000000000 +0100
-+++ linux/net/ipv4/netfilter/ip_conntrack_proto_tcp.c	2005-11-13 15:45:41.045992536 +0100
-@@ -211,7 +211,7 @@
- 			set_bit(IPS_ASSURED_BIT, &conntrack->status);
- 
- 		WRITE_UNLOCK(&tcp_lock);
--		ip_ct_refresh(conntrack, *tcp_timeouts[newconntrack]);
-+		ip_ct_refresh_acct(conntrack,ctinfo,iph, *tcp_timeouts[newconntrack]);
- 	}
- 
- 	return NF_ACCEPT;
---- linux/net/ipv4/netfilter/ip_conntrack_proto_udp.c.org	2003-11-28 19:26:21.000000000 +0100
-+++ linux/net/ipv4/netfilter/ip_conntrack_proto_udp.c	2005-11-13 15:47:38.348159896 +0100
-@@ -47,16 +47,16 @@
- /* Returns verdict for packet, and may modify conntracktype */
- static int udp_packet(struct ip_conntrack *conntrack,
- 		      struct iphdr *iph, size_t len,
--		      enum ip_conntrack_info conntrackinfo)
-+		      enum ip_conntrack_info ctinfo)
- {
- 	/* If we've seen traffic both ways, this is some kind of UDP
- 	   stream.  Extend timeout. */
- 	if (test_bit(IPS_SEEN_REPLY_BIT, &conntrack->status)) {
--		ip_ct_refresh(conntrack, ip_ct_udp_timeout_stream);
-+		ip_ct_refresh_acct(conntrack,ctinfo,iph,ip_ct_udp_timeout_stream);
- 		/* Also, more likely to be important, and not a probe */
- 		set_bit(IPS_ASSURED_BIT, &conntrack->status);
- 	} else
--		ip_ct_refresh(conntrack, ip_ct_udp_timeout);
-+		ip_ct_refresh_acct(conntrack,ctinfo,iph, ip_ct_udp_timeout);
- 
- 	return NF_ACCEPT;
- }
---- linux/net/ipv4/netfilter/ip_conntrack_standalone.c.org	2005-11-12 16:48:38.000000000 +0100
-+++ linux/net/ipv4/netfilter/ip_conntrack_standalone.c	2005-11-13 15:51:07.608347512 +0100
-@@ -79,6 +79,18 @@
- 	return len;
- }
- 
-+#if defined(CONFIG_IP_NF_CT_ACCT) || \
-+	defined(CONFIG_IP_NF_CT_ACCT_MODULE)
-+static unsigned int
-+print_counters(char *buffer, struct ip_conntrack_counter *counter)
-+{
-+       return sprintf(buffer, "packets=%llu bytes=%llu ", 
-+                       counter->packets, counter->bytes);
-+}
-+#else
-+#define print_counters(x, y)   0
-+#endif
-+
- static unsigned int
- print_conntrack(char *buffer, struct ip_conntrack *conntrack)
- {
-@@ -98,11 +110,15 @@
- 	len += print_tuple(buffer + len,
- 			   &conntrack->tuplehash[IP_CT_DIR_ORIGINAL].tuple,
- 			   proto);
-+        len += print_counters(buffer + len, 
-+                           &conntrack->counters[IP_CT_DIR_ORIGINAL]);
- 	if (!(test_bit(IPS_SEEN_REPLY_BIT, &conntrack->status)))
- 		len += sprintf(buffer + len, "[UNREPLIED] ");
- 	len += print_tuple(buffer + len,
- 			   &conntrack->tuplehash[IP_CT_DIR_REPLY].tuple,
- 			   proto);
-+        len += print_counters(buffer + len, 
-+                           &conntrack->counters[IP_CT_DIR_REPLY]);
- 	if (test_bit(IPS_ASSURED_BIT, &conntrack->status))
- 		len += sprintf(buffer + len, "[ASSURED] ");
- 	len += sprintf(buffer + len, "use=%u ",
-@@ -478,7 +494,7 @@
- EXPORT_SYMBOL(ip_conntrack_helper_register);
- EXPORT_SYMBOL(ip_conntrack_helper_unregister);
- EXPORT_SYMBOL(ip_ct_iterate_cleanup);
--EXPORT_SYMBOL(ip_ct_refresh);
-+EXPORT_SYMBOL(ip_ct_refresh_acct);
- EXPORT_SYMBOL(ip_ct_find_proto);
- EXPORT_SYMBOL(__ip_ct_find_proto);
- EXPORT_SYMBOL(ip_ct_find_helper);
---- linux/net/ipv4/netfilter/ip_conntrack_proto_generic.c.org	2003-11-28 19:26:21.000000000 +0100
-+++ linux/net/ipv4/netfilter/ip_conntrack_proto_generic.c	2005-11-13 15:44:20.734201784 +0100
-@@ -41,9 +41,9 @@
- /* Returns verdict for packet, or -1 for invalid. */
- static int established(struct ip_conntrack *conntrack,
- 		       struct iphdr *iph, size_t len,
--		       enum ip_conntrack_info conntrackinfo)
-+		       enum ip_conntrack_info ctinfo)
- {
--	ip_ct_refresh(conntrack, ip_ct_generic_timeout);
-+	ip_ct_refresh_acct(conntrack, ctinfo,iph,ip_ct_generic_timeout);
- 	return NF_ACCEPT;
- }
- 
---- linux/net/ipv4/netfilter/ip_conntrack_proto_icmp.c.org	2003-11-28 19:26:21.000000000 +0100
-+++ linux/net/ipv4/netfilter/ip_conntrack_proto_icmp.c	2005-11-13 15:44:50.733641176 +0100
-@@ -82,7 +82,7 @@
- 			ct->timeout.function((unsigned long)ct);
- 	} else {
- 		atomic_inc(&ct->proto.icmp.count);
--		ip_ct_refresh(ct, ip_ct_icmp_timeout);
-+		ip_ct_refresh_acct(ct,ctinfo,iph, ip_ct_icmp_timeout);
- 	}
- 
- 	return NF_ACCEPT;
---- linux/net/ipv4/netfilter/ip_conntrack_core.c.org	2005-11-12 16:48:38.000000000 +0100
-+++ linux/net/ipv4/netfilter/ip_conntrack_core.c	2005-11-13 15:43:23.882844504 +0100
-@@ -1196,22 +1196,40 @@
- 
- 	MOD_DEC_USE_COUNT;
- }
-+static inline void ct_add_counters(struct ip_conntrack *ct,
-+                                enum ip_conntrack_info ctinfo,
-+                                 const struct iphdr *iph)
-+{
-+#if defined(CONFIG_IP_NF_CT_ACCT) || \
-+	defined(CONFIG_IP_NF_CT_ACCT_MODULE)
-+     if (iph) {
-+            ct->counters[CTINFO2DIR(ctinfo)].packets++;
-+            ct->counters[CTINFO2DIR(ctinfo)].bytes += 
-+                                ntohs(iph->tot_len);
-+   }
-+#endif
-+}
- 
- /* Refresh conntrack for this many jiffies. */
--void ip_ct_refresh(struct ip_conntrack *ct, unsigned long extra_jiffies)
-+void ip_ct_refresh_acct(struct ip_conntrack *ct, 
-+                       enum ip_conntrack_info ctinfo,
-+                       const struct iphdr *iph,
-+                       unsigned long extra_jiffies)
- {
- 	IP_NF_ASSERT(ct->timeout.data == (unsigned long)ct);
- 
- 	WRITE_LOCK(&ip_conntrack_lock);
- 	/* If not in hash table, timer will not be active yet */
--	if (!is_confirmed(ct))
-+	if (!is_confirmed(ct)) {
- 		ct->timeout.expires = extra_jiffies;
--	else {
-+		ct_add_counters(ct, ctinfo,iph);
-+	} else {
- 		/* Need del_timer for race avoidance (may already be dying). */
- 		if (del_timer(&ct->timeout)) {
- 			ct->timeout.expires = jiffies + extra_jiffies;
- 			add_timer(&ct->timeout);
- 		}
-+		ct_add_counters(ct, ctinfo, iph);
- 	}
- 	WRITE_UNLOCK(&ip_conntrack_lock);
- }
---- linux/include/linux/netfilter_ipv4/ip_conntrack.h.org	2005-11-12 16:48:38.000000000 +0100
-+++ linux/include/linux/netfilter_ipv4/ip_conntrack.h	2005-11-13 15:39:04.000000000 +0100
-@@ -164,6 +164,12 @@
- 	union ip_conntrack_expect_help help;
- };
- 
-+struct ip_conntrack_counter
-+{
-+       u_int64_t packets;
-+       u_int64_t bytes;
-+};
-+
- struct ip_conntrack_helper;
- 
- struct ip_conntrack
-@@ -181,6 +187,12 @@
- 	/* Timer function; drops refcnt when it goes off. */
- 	struct timer_list timeout;
- 
-+#if defined(CONFIG_IP_NF_CT_ACCT) || \
-+	defined(CONFIG_IP_NF_CT_ACCT_MODULE)
-+       /* Accounting Information (same cache line as other written members) */
-+       struct ip_conntrack_counter counters[IP_CT_DIR_MAX];
-+#endif
-+
- 	/* If we're expecting another related connection, this will be
-            in expected linked list */
- 	struct list_head sibling_list;
-@@ -264,8 +276,10 @@
- 			  const struct ip_conntrack_tuple *orig);
- 
- /* Refresh conntrack for this many jiffies */
--extern void ip_ct_refresh(struct ip_conntrack *ct,
--			  unsigned long extra_jiffies);
-+extern void ip_ct_refresh_acct(struct ip_conntrack *ct,
-+                              enum ip_conntrack_info ctinfo,
-+                              const struct iphdr *iph,
-+                              unsigned long extra_jiffies);
- 
- /* These are for NAT.  Icky. */
- /* Call me when a conntrack is destroyed. */
---- linux/net/ipv4/netfilter/ipt_connbytes.c.org	1970-01-01 01:00:00.000000000 +0100
-+++ linux/net/ipv4/netfilter/ipt_connbytes.c	2005-11-13 16:22:02.021433872 +0100
-@@ -0,0 +1,163 @@
-+/* Kernel module to match connection tracking byte counter.
-+ * GPL (C) 2002 Martin Devera (devik@cdi.cz).
-+ *
-+ * 2004-07-20 Harald Welte <laforge at netfilter.org>
-+ *      - reimplemented to use per-connection accounting counters
-+ *      - add functionality to match number of packets
-+ *      - add functionality to match average packet size
-+ *      - add support to match directions seperately
-+ *
-+ * 2004-10-24 Piotr Chytla <pch at fouk.org>
-+ * 	- Connbytes with per-connection accouting backported to 2.4
-+ * 	
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/types.h>
-+#include <linux/netfilter_ipv4/ip_conntrack.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ipt_connbytes.h>
-+
-+#include <asm/div64.h>
-+
-+static u_int64_t mydiv(u_int64_t arg1,u_int32_t arg2)
-+{
-+	do_div(arg1,arg2);
-+	return arg1;
-+}
-+
-+static int
-+match(const struct sk_buff *skb,
-+      const struct net_device *in,
-+      const struct net_device *out,
-+      const void *matchinfo,
-+      int offset,
-+      const void *hdr,
-+      u_int16_t datalen,
-+      int *hotdrop)
-+{
-+	static u_int64_t what;
-+	const struct ipt_connbytes_info *sinfo = matchinfo;
-+	enum ip_conntrack_info ctinfo;
-+	struct ip_conntrack *ct;
-+
-+	if (!(ct = ip_conntrack_get((struct sk_buff *)skb, &ctinfo)))
-+		return 0; /* no match */
-+        switch (sinfo->what) {
-+        case IPT_CONNBYTES_PKTS:
-+                switch (sinfo->direction) {
-+                case IPT_CONNBYTES_DIR_ORIGINAL:
-+                        what = ct->counters[IP_CT_DIR_ORIGINAL].packets;
-+                        break;
-+                case IPT_CONNBYTES_DIR_REPLY:
-+                        what = ct->counters[IP_CT_DIR_REPLY].packets;
-+			break;
-+                case IPT_CONNBYTES_DIR_BOTH:
-+                        what = ct->counters[IP_CT_DIR_ORIGINAL].packets;
-+                        what += ct->counters[IP_CT_DIR_REPLY].packets;
-+                        break;
-+                }
-+		break;
-+        case IPT_CONNBYTES_BYTES:
-+                switch (sinfo->direction) {
-+                case IPT_CONNBYTES_DIR_ORIGINAL:
-+                        what = ct->counters[IP_CT_DIR_ORIGINAL].bytes;
-+                        break;
-+                case IPT_CONNBYTES_DIR_REPLY:
-+                        what = ct->counters[IP_CT_DIR_REPLY].bytes;
-+                        break;
-+                case IPT_CONNBYTES_DIR_BOTH:
-+                        what = ct->counters[IP_CT_DIR_ORIGINAL].bytes;
-+                        what += ct->counters[IP_CT_DIR_REPLY].bytes;
-+                        break;
-+                }
-+                break;
-+        case IPT_CONNBYTES_AVGPKT:
-+                switch (sinfo->direction) {
-+                case IPT_CONNBYTES_DIR_ORIGINAL:
-+                        {
-+                                u_int32_t pkts32;
-+
-+                                if (ct->counters[IP_CT_DIR_ORIGINAL].packets > 0xfffffffff)
-+                                        pkts32 = 0xffffffff;
-+                                else
-+                                        pkts32 = ct->counters[IP_CT_DIR_ORIGINAL].packets;
-+				what = mydiv(ct->counters[IP_CT_DIR_ORIGINAL].bytes,pkts32);
-+                        }
-+                        break;
-+                case IPT_CONNBYTES_DIR_REPLY:
-+                        {
-+                                u_int32_t pkts32;
-+
-+                                if (ct->counters[IP_CT_DIR_REPLY].packets > 0xffffffff)
-+                                        pkts32 = 0xffffffff;
-+                                else
-+                                        pkts32 = ct->counters[IP_CT_DIR_REPLY].packets;
-+				what = mydiv(ct->counters[IP_CT_DIR_REPLY].bytes,pkts32);
-+                        }
-+                        break;
-+                case IPT_CONNBYTES_DIR_BOTH:
-+                        {
-+                                u_int64_t bytes;
-+                                u_int64_t pkts;
-+                                u_int32_t pkts32;
-+                                bytes = ct->counters[IP_CT_DIR_ORIGINAL].bytes +
-+                                        ct->counters[IP_CT_DIR_REPLY].bytes;
-+                                pkts = ct->counters[IP_CT_DIR_ORIGINAL].packets +
-+                                        ct->counters[IP_CT_DIR_REPLY].packets;
-+                                if (pkts > 0xffffffff)
-+                                        pkts32 =  0xffffffff;
-+                                else
-+                                        pkts32 = pkts;
-+				what = mydiv(bytes,pkts);
-+                        }
-+                        break;
-+                }
-+                break;
-+        }
-+        if (sinfo->count.to)
-+                return (what <= sinfo->count.to && what >= sinfo->count.from);
-+        else
-+                return (what >= sinfo->count.from);
-+}
-+
-+static int check(const char *tablename,
-+		 const struct ipt_ip *ip,
-+		 void *matchinfo,
-+		 unsigned int matchsize,
-+		 unsigned int hook_mask)
-+{
-+	const struct ipt_connbytes_info *sinfo = matchinfo;
-+
-+	if (matchsize != IPT_ALIGN(sizeof(struct ipt_connbytes_info)))
-+		return 0;
-+        if (sinfo->what != IPT_CONNBYTES_PKTS &&
-+			sinfo->what != IPT_CONNBYTES_BYTES &&
-+		        sinfo->what != IPT_CONNBYTES_AVGPKT)
-+		        return 0;
-+
-+	if (sinfo->direction != IPT_CONNBYTES_DIR_ORIGINAL &&
-+			sinfo->direction != IPT_CONNBYTES_DIR_REPLY &&
-+	                sinfo->direction != IPT_CONNBYTES_DIR_BOTH)
-+			return 0;
-+
-+	return 1;
-+}
-+
-+static struct ipt_match state_match
-+= { { NULL, NULL }, "connbytes", &match, &check, NULL, THIS_MODULE };
-+
-+static int __init init(void)
-+{
-+	return ipt_register_match(&state_match);
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_match(&state_match);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+MODULE_LICENSE("GPL");
---- linux/include/linux/netfilter_ipv4/ipt_connbytes.h.org	1970-01-01 01:00:00.000000000 +0100
-+++ linux/include/linux/netfilter_ipv4/ipt_connbytes.h	2005-11-13 16:11:24.567341624 +0100
-@@ -0,0 +1,25 @@
-+#ifndef _IPT_CONNBYTES_H
-+#define _IPT_CONNBYTES_H
-+enum ipt_connbytes_what {
-+	        IPT_CONNBYTES_PKTS,
-+	        IPT_CONNBYTES_BYTES,
-+	        IPT_CONNBYTES_AVGPKT,
-+};
-+
-+enum ipt_connbytes_direction {
-+	        IPT_CONNBYTES_DIR_ORIGINAL,
-+	        IPT_CONNBYTES_DIR_REPLY,
-+	        IPT_CONNBYTES_DIR_BOTH,
-+};
-+
-+struct ipt_connbytes_info
-+{
-+        struct {
-+                u_int64_t from; /* count to be matched */
-+                u_int64_t to;   /* count to be matched */
-+        } count;
-+        u_int8_t what;          /* ipt_connbytes_what */
-+        u_int8_t direction;     /* ipt_connbytes_direction */
-+};
-+
-+#endif
---- linux-2.4.32/net/ipv4/netfilter/ip_conntrack_proto_gre.c	2006-02-04 19:16:25.000000000 +0100
-+++ /home/florian//openwrt/trunk/openwrt/build_mipsel/linux/net/ipv4/netfilter/ip_conntrack_proto_gre.c	2006-02-04 18:19:08.000000000 +0100
-@@ -237,16 +237,16 @@
- /* Returns verdict for packet, and may modify conntrack */
- static int gre_packet(struct ip_conntrack *ct,
- 		      struct iphdr *iph, size_t len,
--		      enum ip_conntrack_info conntrackinfo)
-+		      enum ip_conntrack_info ctinfo)
- {
- 	/* If we've seen traffic both ways, this is a GRE connection.
- 	 * Extend timeout. */
- 	if (ct->status & IPS_SEEN_REPLY) {
--		ip_ct_refresh_acct(ct, ct->proto.gre.stream_timeout);
-+		ip_ct_refresh_acct(ct, ctinfo, iph, ct->proto.gre.stream_timeout);
- 		/* Also, more likely to be important, and not a probe. */
- 		set_bit(IPS_ASSURED_BIT, &ct->status);
- 	} else
--		ip_ct_refresh_acct(ct, ct->proto.gre.timeout);
-+		ip_ct_refresh_acct(ct, ctinfo, iph, ct->proto.gre.timeout);
- 	
- 	return NF_ACCEPT;
- }
diff --git a/openwrt/target/linux/generic-2.4/patches/611-netfilter_condition.patch b/openwrt/target/linux/generic-2.4/patches/611-netfilter_condition.patch
deleted file mode 100644
index 6c16c29f0c..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/611-netfilter_condition.patch
+++ /dev/null
@@ -1,625 +0,0 @@
-diff -ruN linux-2.4.30-old/Documentation/Configure.help linux-2.4.30-new/Documentation/Configure.help
---- linux-2.4.30-old/Documentation/Configure.help	2005-11-13 21:52:27.000000000 +0100
-+++ linux-2.4.30-new/Documentation/Configure.help	2005-11-13 22:20:15.000000000 +0100
-@@ -2979,6 +2979,14 @@
-   If you want to compile it as a module, say M here and read
-   <file:Documentation/modules.txt>.  If unsure, say `N'.
- 
-+Condition variable match support
-+CONFIG_IP_NF_MATCH_CONDITION
-+  This option allows you to match firewall rules against condition
-+  variables stored in the /proc/net/ipt_condition directory.
-+
-+  If you want to compile it as a module, say M here and read
-+  Documentation/modules.txt.  If unsure, say `N'.
-+
- conntrack match support
- CONFIG_IP_NF_MATCH_CONNTRACK
-   This is a general conntrack match module, a superset of the state match.
-@@ -3354,6 +3362,14 @@
-   If you want to compile it as a module, say M here and read
-   <file:Documentation/modules.txt>.  If unsure, say `N'.
- 
-+Condition variable match support
-+CONFIG_IP6_NF_MATCH_CONDITION
-+  This option allows you to match firewall rules against condition
-+  variables stored in the /proc/net/ipt_condition directory.
-+
-+  If you want to compile it as a module, say M here and read
-+  Documentation/modules.txt.  If unsure, say `N'.
-+
- Multiple port match support
- CONFIG_IP6_NF_MATCH_MULTIPORT
-   Multiport matching allows you to match TCP or UDP packets based on
-diff -ruN linux-2.4.30-old/include/linux/netfilter_ipv4/ipt_condition.h linux-2.4.30-new/include/linux/netfilter_ipv4/ipt_condition.h
---- linux-2.4.30-old/include/linux/netfilter_ipv4/ipt_condition.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-new/include/linux/netfilter_ipv4/ipt_condition.h	2005-11-13 22:20:14.000000000 +0100
-@@ -0,0 +1,11 @@
-+#ifndef __IPT_CONDITION_MATCH__
-+#define __IPT_CONDITION_MATCH__
-+
-+#define CONDITION_NAME_LEN  32
-+
-+struct condition_info {
-+	char name[CONDITION_NAME_LEN];
-+	int  invert;
-+};
-+
-+#endif
-diff -ruN linux-2.4.30-old/include/linux/netfilter_ipv6/ip6t_condition.h linux-2.4.30-new/include/linux/netfilter_ipv6/ip6t_condition.h
---- linux-2.4.30-old/include/linux/netfilter_ipv6/ip6t_condition.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-new/include/linux/netfilter_ipv6/ip6t_condition.h	2005-11-13 22:20:14.000000000 +0100
-@@ -0,0 +1,11 @@
-+#ifndef __IP6T_CONDITION_MATCH__
-+#define __IP6T_CONDITION_MATCH__
-+
-+#define CONDITION6_NAME_LEN  32
-+
-+struct condition6_info {
-+	char name[CONDITION6_NAME_LEN];
-+	int  invert;
-+};
-+
-+#endif
-diff -ruN linux-2.4.30-old/net/ipv4/netfilter/Config.in linux-2.4.30-new/net/ipv4/netfilter/Config.in
---- linux-2.4.30-old/net/ipv4/netfilter/Config.in	2005-11-13 21:52:27.000000000 +0100
-+++ linux-2.4.30-new/net/ipv4/netfilter/Config.in	2005-11-13 22:20:15.000000000 +0100
-@@ -43,6 +43,7 @@
-   dep_tristate '  netfilter MARK match support' CONFIG_IP_NF_MATCH_MARK $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  Multiple port match support' CONFIG_IP_NF_MATCH_MULTIPORT $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  TOS match support' CONFIG_IP_NF_MATCH_TOS $CONFIG_IP_NF_IPTABLES
-+  dep_tristate '  condition match support' CONFIG_IP_NF_MATCH_CONDITION $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  recent match support' CONFIG_IP_NF_MATCH_RECENT $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  ECN match support' CONFIG_IP_NF_MATCH_ECN $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  peer to peer traffic match support' CONFIG_IP_NF_MATCH_IPP2P $CONFIG_IP_NF_IPTABLES
-diff -ruN linux-2.4.30-old/net/ipv4/netfilter/Makefile linux-2.4.30-new/net/ipv4/netfilter/Makefile
---- linux-2.4.30-old/net/ipv4/netfilter/Makefile	2005-11-13 21:52:27.000000000 +0100
-+++ linux-2.4.30-new/net/ipv4/netfilter/Makefile	2005-11-13 22:20:15.000000000 +0100
-@@ -94,6 +94,7 @@
- obj-$(CONFIG_IP_NF_MATCH_MULTIPORT) += ipt_multiport.o
- obj-$(CONFIG_IP_NF_MATCH_OWNER) += ipt_owner.o
- obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o
-+obj-$(CONFIG_IP_NF_MATCH_CONDITION) += ipt_condition.o
- 
- obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o
- 
-diff -ruN linux-2.4.30-old/net/ipv4/netfilter/ipt_condition.c linux-2.4.30-new/net/ipv4/netfilter/ipt_condition.c
---- linux-2.4.30-old/net/ipv4/netfilter/ipt_condition.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-new/net/ipv4/netfilter/ipt_condition.c	2005-11-13 22:20:14.000000000 +0100
-@@ -0,0 +1,256 @@
-+/*-------------------------------------------*\
-+|          Netfilter Condition Module         |
-+|                                             |
-+|  Description: This module allows firewall   |
-+|    rules to match using condition variables |
-+|    stored in /proc files.                   |
-+|                                             |
-+|  Author: Stephane Ouellette     2002-10-22  |
-+|          <ouellettes@videotron.ca>          |
-+|                                             |
-+|  History:                                   |
-+|    2003-02-10  Second version with improved |
-+|                locking and simplified code. |
-+|                                             |
-+|  This software is distributed under the     |
-+|  terms of the GNU GPL.                      |
-+\*-------------------------------------------*/
-+
-+#include<linux/module.h>
-+#include<linux/proc_fs.h>
-+#include<linux/spinlock.h>
-+#include<linux/string.h>
-+#include<asm/atomic.h>
-+#include<linux/netfilter_ipv4/ip_tables.h>
-+#include<linux/netfilter_ipv4/ipt_condition.h>
-+
-+
-+#ifndef CONFIG_PROC_FS
-+#error  "Proc file system support is required for this module"
-+#endif
-+
-+
-+MODULE_AUTHOR("Stephane Ouellette <ouellettes@videotron.ca>");
-+MODULE_DESCRIPTION("Allows rules to match against condition variables");
-+MODULE_LICENSE("GPL");
-+
-+
-+struct condition_variable {
-+	struct condition_variable *next;
-+	struct proc_dir_entry *status_proc;
-+	atomic_t refcount;
-+        int enabled;   /* TRUE == 1, FALSE == 0 */
-+};
-+
-+
-+static rwlock_t list_lock;
-+static struct condition_variable *head = NULL;
-+static struct proc_dir_entry *proc_net_condition = NULL;
-+
-+
-+static int
-+ipt_condition_read_info(char *buffer, char **start, off_t offset,
-+			int length, int *eof, void *data)
-+{
-+	struct condition_variable *var =
-+	    (struct condition_variable *) data;
-+
-+	if (offset == 0) {
-+		*start = buffer;
-+		buffer[0] = (var->enabled) ? '1' : '0';
-+		buffer[1] = '\n';
-+		return 2;
-+	}
-+
-+	*eof = 1;
-+	return 0;
-+}
-+
-+
-+static int
-+ipt_condition_write_info(struct file *file, const char *buffer,
-+			 unsigned long length, void *data)
-+{
-+	struct condition_variable *var =
-+	    (struct condition_variable *) data;
-+
-+	if (length) {
-+	        /* Match only on the first character */
-+		switch (buffer[0]) {
-+		case '0':
-+			var->enabled = 0;
-+			break;
-+		case '1':
-+			var->enabled = 1;
-+		}
-+	}
-+
-+	return (int) length;
-+}
-+
-+
-+static int
-+match(const struct sk_buff *skb, const struct net_device *in,
-+      const struct net_device *out, const void *matchinfo, int offset,
-+      const void *hdr, u_int16_t datalen, int *hotdrop)
-+{
-+	const struct condition_info *info =
-+	    (const struct condition_info *) matchinfo;
-+	struct condition_variable *var;
-+	int condition_status = 0;
-+
-+	read_lock(&list_lock);
-+
-+	for (var = head; var; var = var->next) {
-+		if (strcmp(info->name, var->status_proc->name) == 0) {
-+			condition_status = var->enabled;
-+			break;
-+		}
-+	}
-+
-+	read_unlock(&list_lock);
-+
-+	return condition_status ^ info->invert;
-+}
-+
-+
-+
-+static int
-+checkentry(const char *tablename, const struct ipt_ip *ip,
-+	   void *matchinfo, unsigned int matchsize, unsigned int hook_mask)
-+{
-+	struct condition_info *info = (struct condition_info *) matchinfo;
-+	struct condition_variable *var, *newvar;
-+
-+	if (matchsize != IPT_ALIGN(sizeof(struct condition_info)))
-+		return 0;
-+
-+	/* The first step is to check if the condition variable already exists. */
-+	/* Here, a read lock is sufficient because we won't change the list */
-+	read_lock(&list_lock);
-+
-+	for (var = head; var; var = var->next) {
-+		if (strcmp(info->name, var->status_proc->name) == 0) {
-+			atomic_inc(&var->refcount);
-+			read_unlock(&list_lock);
-+			return 1;
-+		}
-+	}
-+
-+	read_unlock(&list_lock);
-+
-+	/* At this point, we need to allocate a new condition variable */
-+	newvar = kmalloc(sizeof(struct condition_variable), GFP_KERNEL);
-+
-+	if (!newvar)
-+		return -ENOMEM;
-+
-+	/* Create the condition variable's proc file entry */
-+	newvar->status_proc = create_proc_entry(info->name, 0644, proc_net_condition);
-+
-+	if (!newvar->status_proc) {
-+	  /*
-+	   * There are two possibilities:
-+	   *  1- Another condition variable with the same name has been created, which is valid.
-+	   *  2- There was a memory allocation error.
-+	   */
-+		kfree(newvar);
-+		read_lock(&list_lock);
-+
-+		for (var = head; var; var = var->next) {
-+			if (strcmp(info->name, var->status_proc->name) == 0) {
-+				atomic_inc(&var->refcount);
-+				read_unlock(&list_lock);
-+				return 1;
-+			}
-+		}
-+
-+		read_unlock(&list_lock);
-+		return -ENOMEM;
-+	}
-+
-+	atomic_set(&newvar->refcount, 1);
-+	newvar->enabled = 0;
-+	newvar->status_proc->owner = THIS_MODULE;
-+	newvar->status_proc->data = newvar;
-+	wmb();
-+	newvar->status_proc->read_proc = ipt_condition_read_info;
-+	newvar->status_proc->write_proc = ipt_condition_write_info;
-+
-+	write_lock(&list_lock);
-+
-+	newvar->next = head;
-+	head = newvar;
-+
-+	write_unlock(&list_lock);
-+
-+	return 1;
-+}
-+
-+
-+static void
-+destroy(void *matchinfo, unsigned int matchsize)
-+{
-+	struct condition_info *info = (struct condition_info *) matchinfo;
-+	struct condition_variable *var, *prev = NULL;
-+
-+	if (matchsize != IPT_ALIGN(sizeof(struct condition_info)))
-+		return;
-+
-+	write_lock(&list_lock);
-+
-+	for (var = head; var && strcmp(info->name, var->status_proc->name);
-+	     prev = var, var = var->next);
-+
-+	if (var && atomic_dec_and_test(&var->refcount)) {
-+		if (prev)
-+			prev->next = var->next;
-+		else
-+			head = var->next;
-+
-+		write_unlock(&list_lock);
-+		remove_proc_entry(var->status_proc->name, proc_net_condition);
-+		kfree(var);
-+	} else
-+		write_unlock(&list_lock);
-+}
-+
-+
-+static struct ipt_match condition_match = {
-+	.name = "condition",
-+	.match = &match,
-+	.checkentry = &checkentry,
-+	.destroy = &destroy,
-+	.me = THIS_MODULE
-+};
-+
-+
-+static int __init
-+init(void)
-+{
-+	int errorcode;
-+
-+	rwlock_init(&list_lock);
-+	proc_net_condition = proc_mkdir("ipt_condition", proc_net);
-+
-+	if (proc_net_condition) {
-+	        errorcode = ipt_register_match(&condition_match);
-+
-+		if (errorcode)
-+			remove_proc_entry("ipt_condition", proc_net);
-+	} else
-+		errorcode = -EACCES;
-+
-+	return errorcode;
-+}
-+
-+
-+static void __exit
-+fini(void)
-+{
-+	ipt_unregister_match(&condition_match);
-+	remove_proc_entry("ipt_condition", proc_net);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -ruN linux-2.4.30-old/net/ipv6/netfilter/Config.in linux-2.4.30-new/net/ipv6/netfilter/Config.in
---- linux-2.4.30-old/net/ipv6/netfilter/Config.in	2003-06-13 16:51:39.000000000 +0200
-+++ linux-2.4.30-new/net/ipv6/netfilter/Config.in	2005-11-13 22:20:15.000000000 +0100
-@@ -17,6 +17,7 @@
- if [ "$CONFIG_IP6_NF_IPTABLES" != "n" ]; then
- # The simple matches.
-   dep_tristate '  limit match support' CONFIG_IP6_NF_MATCH_LIMIT $CONFIG_IP6_NF_IPTABLES
-+  dep_tristate '  condition match support' CONFIG_IP6_NF_MATCH_CONDITION $CONFIG_IP6_NF_IPTABLES
-   dep_tristate '  MAC address match support' CONFIG_IP6_NF_MATCH_MAC $CONFIG_IP6_NF_IPTABLES
-   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-     dep_tristate '  Routing header match support (EXPERIMENTAL)' CONFIG_IP6_NF_MATCH_RT $CONFIG_IP6_NF_IPTABLES
-diff -ruN linux-2.4.30-old/net/ipv6/netfilter/Makefile linux-2.4.30-new/net/ipv6/netfilter/Makefile
---- linux-2.4.30-old/net/ipv6/netfilter/Makefile	2003-06-13 16:51:39.000000000 +0200
-+++ linux-2.4.30-new/net/ipv6/netfilter/Makefile	2005-11-13 22:20:15.000000000 +0100
-@@ -14,6 +14,7 @@
- # Link order matters here.
- obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
- obj-$(CONFIG_IP6_NF_MATCH_LIMIT) += ip6t_limit.o
-+obj-$(CONFIG_IP6_NF_MATCH_CONDITION) += ip6t_condition.o
- obj-$(CONFIG_IP6_NF_MATCH_MARK) += ip6t_mark.o
- obj-$(CONFIG_IP6_NF_MATCH_LENGTH) += ip6t_length.o
- obj-$(CONFIG_IP6_NF_MATCH_MAC) += ip6t_mac.o
-diff -ruN linux-2.4.30-old/net/ipv6/netfilter/ip6t_condition.c linux-2.4.30-new/net/ipv6/netfilter/ip6t_condition.c
---- linux-2.4.30-old/net/ipv6/netfilter/ip6t_condition.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-new/net/ipv6/netfilter/ip6t_condition.c	2005-11-13 22:20:14.000000000 +0100
-@@ -0,0 +1,254 @@
-+/*-------------------------------------------*\
-+|    Netfilter Condition Module for IPv6      |
-+|                                             |
-+|  Description: This module allows firewall   |
-+|    rules to match using condition variables |
-+|    stored in /proc files.                   |
-+|                                             |
-+|  Author: Stephane Ouellette     2003-02-10  |
-+|          <ouellettes@videotron.ca>          |
-+|                                             |
-+|  This software is distributed under the     |
-+|  terms of the GNU GPL.                      |
-+\*-------------------------------------------*/
-+
-+#include<linux/module.h>
-+#include<linux/proc_fs.h>
-+#include<linux/spinlock.h>
-+#include<linux/string.h>
-+#include<asm/atomic.h>
-+#include<linux/netfilter_ipv6/ip6_tables.h>
-+#include<linux/netfilter_ipv6/ip6t_condition.h>
-+
-+
-+#ifndef CONFIG_PROC_FS
-+#error  "Proc file system support is required for this module"
-+#endif
-+
-+
-+MODULE_AUTHOR("Stephane Ouellette <ouellettes@videotron.ca>");
-+MODULE_DESCRIPTION("Allows rules to match against condition variables");
-+MODULE_LICENSE("GPL");
-+
-+
-+struct condition_variable {
-+	struct condition_variable *next;
-+	struct proc_dir_entry *status_proc;
-+	atomic_t refcount;
-+        int enabled; /* TRUE == 1, FALSE == 0 */
-+};
-+
-+
-+static rwlock_t list_lock;
-+static struct condition_variable *head = NULL;
-+static struct proc_dir_entry *proc_net_condition = NULL;
-+
-+
-+static int
-+ipt_condition_read_info(char *buffer, char **start, off_t offset,
-+			int length, int *eof, void *data)
-+{
-+	struct condition_variable *var =
-+	    (struct condition_variable *) data;
-+
-+	if (offset == 0) {
-+		*start = buffer;
-+		buffer[0] = (var->enabled) ? '1' : '0';
-+		buffer[1] = '\n';
-+		return 2;
-+	}
-+
-+	*eof = 1;
-+	return 0;
-+}
-+
-+
-+static int
-+ipt_condition_write_info(struct file *file, const char *buffer,
-+			 unsigned long length, void *data)
-+{
-+	struct condition_variable *var =
-+	    (struct condition_variable *) data;
-+
-+	if (length) {
-+	        /* Match only on the first character */
-+		switch (buffer[0]) {
-+		case '0':
-+			var->enabled = 0;
-+			break;
-+		case '1':
-+			var->enabled = 1;
-+		}
-+	}
-+
-+	return (int) length;
-+}
-+
-+
-+static int
-+match(const struct sk_buff *skb, const struct net_device *in,
-+      const struct net_device *out, const void *matchinfo, int offset,
-+      const void *hdr, u_int16_t datalen, int *hotdrop)
-+{
-+	const struct condition6_info *info =
-+	    (const struct condition6_info *) matchinfo;
-+	struct condition_variable *var;
-+	int condition_status = 0;
-+
-+	read_lock(&list_lock);
-+
-+	for (var = head; var; var = var->next) {
-+		if (strcmp(info->name, var->status_proc->name) == 0) {
-+			condition_status = var->enabled;
-+			break;
-+		}
-+	}
-+
-+	read_unlock(&list_lock);
-+
-+	return condition_status ^ info->invert;
-+}
-+
-+
-+
-+static int
-+checkentry(const char *tablename, const struct ip6t_ip6 *ip,
-+	   void *matchinfo, unsigned int matchsize, unsigned int hook_mask)
-+{
-+	struct condition6_info *info =
-+	    (struct condition6_info *) matchinfo;
-+	struct condition_variable *var, *newvar;
-+
-+	if (matchsize != IP6T_ALIGN(sizeof(struct condition6_info)))
-+		return 0;
-+
-+	/* The first step is to check if the condition variable already exists. */
-+	/* Here, a read lock is sufficient because we won't change the list */
-+	read_lock(&list_lock);
-+
-+	for (var = head; var; var = var->next) {
-+		if (strcmp(info->name, var->status_proc->name) == 0) {
-+			atomic_inc(&var->refcount);
-+			read_unlock(&list_lock);
-+			return 1;
-+		}
-+	}
-+
-+	read_unlock(&list_lock);
-+
-+	/* At this point, we need to allocate a new condition variable */
-+	newvar = kmalloc(sizeof(struct condition_variable), GFP_KERNEL);
-+
-+	if (!newvar)
-+		return -ENOMEM;
-+
-+	/* Create the condition variable's proc file entry */
-+	newvar->status_proc = create_proc_entry(info->name, 0644, proc_net_condition);
-+
-+	if (!newvar->status_proc) {
-+	  /*
-+	   * There are two possibilities:
-+	   *  1- Another condition variable with the same name has been created, which is valid.
-+	   *  2- There was a memory allocation error.
-+	   */
-+		kfree(newvar);
-+		read_lock(&list_lock);
-+
-+		for (var = head; var; var = var->next) {
-+			if (strcmp(info->name, var->status_proc->name) == 0) {
-+				atomic_inc(&var->refcount);
-+				read_unlock(&list_lock);
-+				return 1;
-+			}
-+		}
-+
-+		read_unlock(&list_lock);
-+		return -ENOMEM;
-+	}
-+
-+	atomic_set(&newvar->refcount, 1);
-+	newvar->enabled = 0;
-+	newvar->status_proc->owner = THIS_MODULE;
-+	newvar->status_proc->data = newvar;
-+	wmb();
-+	newvar->status_proc->read_proc = ipt_condition_read_info;
-+	newvar->status_proc->write_proc = ipt_condition_write_info;
-+
-+	write_lock(&list_lock);
-+
-+	newvar->next = head;
-+	head = newvar;
-+
-+	write_unlock(&list_lock);
-+
-+	return 1;
-+}
-+
-+
-+static void
-+destroy(void *matchinfo, unsigned int matchsize)
-+{
-+	struct condition6_info *info =
-+	    (struct condition6_info *) matchinfo;
-+	struct condition_variable *var, *prev = NULL;
-+
-+	if (matchsize != IP6T_ALIGN(sizeof(struct condition6_info)))
-+		return;
-+
-+	write_lock(&list_lock);
-+
-+	for (var = head; var && strcmp(info->name, var->status_proc->name);
-+	     prev = var, var = var->next);
-+
-+	if (var && atomic_dec_and_test(&var->refcount)) {
-+		if (prev)
-+			prev->next = var->next;
-+		else
-+			head = var->next;
-+
-+		write_unlock(&list_lock);
-+		remove_proc_entry(var->status_proc->name, proc_net_condition);
-+		kfree(var);
-+	} else
-+		write_unlock(&list_lock);
-+}
-+
-+
-+static struct ip6t_match condition_match = {
-+	.name = "condition",
-+	.match = &match,
-+	.checkentry = &checkentry,
-+	.destroy = &destroy,
-+	.me = THIS_MODULE
-+};
-+
-+
-+static int __init
-+init(void)
-+{
-+	int errorcode;
-+
-+	rwlock_init(&list_lock);
-+	proc_net_condition = proc_mkdir("ip6t_condition", proc_net);
-+
-+	if (proc_net_condition) {
-+	        errorcode = ipt_register_match(&condition_match);
-+
-+		if (errorcode)
-+			remove_proc_entry("ip6t_condition", proc_net);
-+	} else
-+		errorcode = -EACCES;
-+
-+	return errorcode;
-+}
-+
-+
-+static void __exit
-+fini(void)
-+{
-+	ipt_unregister_match(&condition_match);
-+	remove_proc_entry("ip6t_condition", proc_net);
-+}
-+
-+module_init(init);
-+module_exit(fini);
diff --git a/openwrt/target/linux/generic-2.4/patches/612-netfilter_quota.patch b/openwrt/target/linux/generic-2.4/patches/612-netfilter_quota.patch
deleted file mode 100644
index a0a019c171..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/612-netfilter_quota.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-diff -ruN linux-2.4.30-old/Documentation/Configure.help linux-2.4.30-new/Documentation/Configure.help
---- linux-2.4.30-old/Documentation/Configure.help	2005-11-13 22:30:42.000000000 +0100
-+++ linux-2.4.30-new/Documentation/Configure.help	2005-11-13 22:31:17.000000000 +0100
-@@ -2888,6 +2888,13 @@
-   If you want to compile it as a module, say M here and read
-   <file:Documentation/modules.txt>.  If unsure, say `N'.
- 
-+quota match support
-+CONFIG_IP_NF_MATCH_QUOTA
-+  This match implements network quotas.
-+
-+  If you want to compile it as a module, say M here and read
-+  Documentation/modules.txt.  If unsure, say `N'.
-+
- skb->pkt_type packet match support
- CONFIG_IP_NF_MATCH_PKTTYPE
-   This patch allows you to match packet in accrodance
-diff -ruN linux-2.4.30-old/include/linux/netfilter_ipv4/ipt_quota.h linux-2.4.30-new/include/linux/netfilter_ipv4/ipt_quota.h
---- linux-2.4.30-old/include/linux/netfilter_ipv4/ipt_quota.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-new/include/linux/netfilter_ipv4/ipt_quota.h	2005-11-13 22:31:17.000000000 +0100
-@@ -0,0 +1,12 @@
-+#ifndef _IPT_QUOTA_H
-+#define _IPT_QUOTA_H
-+
-+/* print debug info in both kernel/netfilter module & iptable library */
-+//#define DEBUG_IPT_QUOTA
-+
-+struct ipt_quota_info {
-+        u_int64_t quota;
-+	struct ipt_quota_info *master;
-+};
-+
-+#endif /*_IPT_QUOTA_H*/
-diff -ruN linux-2.4.30-old/net/ipv4/netfilter/Config.in linux-2.4.30-new/net/ipv4/netfilter/Config.in
---- linux-2.4.30-old/net/ipv4/netfilter/Config.in	2005-11-13 22:30:42.000000000 +0100
-+++ linux-2.4.30-new/net/ipv4/netfilter/Config.in	2005-11-13 22:31:17.000000000 +0100
-@@ -24,6 +24,7 @@
- if [ "$CONFIG_IP_NF_IPTABLES" != "n" ]; then
- # The simple matches.
-   dep_tristate '  limit match support' CONFIG_IP_NF_MATCH_LIMIT $CONFIG_IP_NF_IPTABLES
-+  dep_tristate '  quota match support' CONFIG_IP_NF_MATCH_QUOTA $CONFIG_IP_NF_IPTABLES
- 
-   dep_tristate '  IP set support' CONFIG_IP_NF_SET $CONFIG_IP_NF_IPTABLES
-   if [ "$CONFIG_IP_NF_SET" != "n" ]; then
-diff -ruN linux-2.4.30-old/net/ipv4/netfilter/Makefile linux-2.4.30-new/net/ipv4/netfilter/Makefile
---- linux-2.4.30-old/net/ipv4/netfilter/Makefile	2005-11-13 22:30:42.000000000 +0100
-+++ linux-2.4.30-new/net/ipv4/netfilter/Makefile	2005-11-13 22:31:17.000000000 +0100
-@@ -74,6 +74,7 @@
- # matches
- obj-$(CONFIG_IP_NF_MATCH_HELPER) += ipt_helper.o
- obj-$(CONFIG_IP_NF_MATCH_LIMIT) += ipt_limit.o
-+obj-$(CONFIG_IP_NF_MATCH_QUOTA) += ipt_quota.o
- obj-$(CONFIG_IP_NF_MATCH_MARK) += ipt_mark.o
- obj-$(CONFIG_IP_NF_MATCH_SET) += ipt_set.o
- obj-$(CONFIG_IP_NF_TARGET_SET) += ipt_SET.o
-diff -ruN linux-2.4.30-old/net/ipv4/netfilter/ipt_quota.c linux-2.4.30-new/net/ipv4/netfilter/ipt_quota.c
---- linux-2.4.30-old/net/ipv4/netfilter/ipt_quota.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-new/net/ipv4/netfilter/ipt_quota.c	2005-11-13 22:31:17.000000000 +0100
-@@ -0,0 +1,88 @@
-+/* 
-+ * netfilter module to enforce network quotas
-+ *
-+ * Sam Johnston <samj@samj.net>
-+ *
-+ * 30/01/05: Fixed on SMP --Pablo Neira <pablo@eurodev.net>
-+ */
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/spinlock.h>
-+#include <linux/interrupt.h>
-+
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ipt_quota.h>
-+
-+MODULE_LICENSE("GPL");
-+
-+static spinlock_t quota_lock = SPIN_LOCK_UNLOCKED;
-+
-+static int
-+match(const struct sk_buff *skb,
-+      const struct net_device *in,
-+      const struct net_device *out,
-+      const void *matchinfo,
-+      int offset, const void *hdr, u_int16_t datalen, int *hotdrop)
-+{
-+	struct ipt_quota_info *q =
-+		((struct ipt_quota_info *) matchinfo)->master;
-+
-+        spin_lock_bh(&quota_lock);
-+
-+        if (q->quota >= datalen) {
-+                /* we can afford this one */
-+                q->quota -= datalen;
-+                spin_unlock_bh(&quota_lock);
-+
-+#ifdef DEBUG_IPT_QUOTA
-+                printk("IPT Quota OK: %llu datlen %d \n", q->quota, datalen);
-+#endif
-+                return 1;
-+        }
-+
-+        /* so we do not allow even small packets from now on */
-+        q->quota = 0;
-+
-+#ifdef DEBUG_IPT_QUOTA
-+        printk("IPT Quota Failed: %llu datlen %d \n", q->quota, datalen);
-+#endif
-+
-+        spin_unlock_bh(&quota_lock);
-+        return 0;
-+}
-+
-+static int
-+checkentry(const char *tablename,
-+           const struct ipt_ip *ip,
-+           void *matchinfo, unsigned int matchsize, unsigned int hook_mask)
-+{
-+        /* TODO: spinlocks? sanity checks? */
-+	struct ipt_quota_info *q = (struct ipt_quota_info *) matchinfo;
-+
-+        if (matchsize != IPT_ALIGN(sizeof (struct ipt_quota_info)))
-+                return 0;
-+	
-+	/* For SMP, we only want to use one set of counters. */
-+	q->master = q;
-+
-+        return 1;
-+}
-+
-+static struct ipt_match quota_match
-+    = { {NULL, NULL}, "quota", &match, &checkentry, NULL, THIS_MODULE };
-+
-+static int __init
-+init(void)
-+{
-+        return ipt_register_match(&quota_match);
-+}
-+
-+static void __exit
-+fini(void)
-+{
-+        ipt_unregister_match(&quota_match);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
diff --git a/openwrt/target/linux/generic-2.4/patches/613-netfilter_nat_h323.patch b/openwrt/target/linux/generic-2.4/patches/613-netfilter_nat_h323.patch
deleted file mode 100644
index 983d4fef3a..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/613-netfilter_nat_h323.patch
+++ /dev/null
@@ -1,821 +0,0 @@
-diff -urN linux-2.4.32/net/ipv4/netfilter/Config.in linux-2.4.32.new/net/ipv4/netfilter/Config.in
---- linux-2.4.32/net/ipv4/netfilter/Config.in	2006-03-01 00:49:36.652505800 +0100
-+++ linux-2.4.32.new/net/ipv4/netfilter/Config.in	2006-03-01 00:50:18.692114808 +0100
-@@ -15,6 +15,7 @@
-   dep_tristate '  Connection byte counter support' CONFIG_IP_NF_MATCH_CONNBYTES $CONFIG_IP_NF_CT_ACCT $CONFIG_IP_NF_CONNTRACK $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  GRE protocol support' CONFIG_IP_NF_CT_PROTO_GRE $CONFIG_IP_NF_CONNTRACK
-   dep_tristate '   PPTP protocol support' CONFIG_IP_NF_PPTP $CONFIG_IP_NF_CT_PROTO_GRE
-+  dep_tristate '  H.323 (netmeeting) support' CONFIG_IP_NF_H323 $CONFIG_IP_NF_CONNTRACK
- fi
- 
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-@@ -111,6 +112,13 @@
-           define_tristate CONFIG_IP_NF_NAT_AMANDA $CONFIG_IP_NF_NAT
-         fi
-       fi
-+      if [ "$CONFIG_IP_NF_H323" = "m" ]; then
-+       define_tristate CONFIG_IP_NF_NAT_H323 m
-+      else
-+       if [ "$CONFIG_IP_NF_H323" = "y" ]; then
-+         define_tristate CONFIG_IP_NF_NAT_H323 $CONFIG_IP_NF_NAT
-+       fi
-+      fi
-       if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-         dep_tristate '    Basic SNMP-ALG support (EXPERIMENTAL)' CONFIG_IP_NF_NAT_SNMP_BASIC $CONFIG_IP_NF_NAT
-       fi
-diff -urN linux-2.4.32/net/ipv4/netfilter/Makefile linux-2.4.32.new/net/ipv4/netfilter/Makefile
---- linux-2.4.32/net/ipv4/netfilter/Makefile	2006-03-01 00:49:36.654505496 +0100
-+++ linux-2.4.32.new/net/ipv4/netfilter/Makefile	2006-03-01 00:50:18.693114656 +0100
-@@ -53,6 +53,10 @@
- ifdef CONFIG_IP_NF_NAT_PPTP
- 	export-objs += ip_conntrack_pptp.o
- endif
-+obj-$(CONFIG_IP_NF_H323) += ip_conntrack_h323.o
-+ifdef CONFIG_IP_NF_NAT_H323
-+       export-objs += ip_conntrack_h323.o
-+endif
- 
- 
- # NAT helpers 
-@@ -62,6 +66,7 @@
- obj-$(CONFIG_IP_NF_NAT_IRC) += ip_nat_irc.o
- obj-$(CONFIG_IP_NF_NAT_PROTO_GRE) += ip_nat_proto_gre.o
- obj-$(CONFIG_IP_NF_NAT_PPTP) += ip_nat_pptp.o
-+obj-$(CONFIG_IP_NF_NAT_H323) += ip_nat_h323.o
- 
- # generic IP tables 
- obj-$(CONFIG_IP_NF_IPTABLES) += ip_tables.o
-diff -urN linux-2.4.32/net/ipv4/netfilter/ip_conntrack_h323.c linux-2.4.32.new/net/ipv4/netfilter/ip_conntrack_h323.c
---- linux-2.4.32/net/ipv4/netfilter/ip_conntrack_h323.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.new/net/ipv4/netfilter/ip_conntrack_h323.c	2006-03-01 00:50:18.694114504 +0100
-@@ -0,0 +1,302 @@
-+/* 
-+ * H.323 'brute force' extension for H.323 connection tracking. 
-+ * Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * Based on ip_masq_h323.c for 2.2 kernels from CoRiTel, Sofia project.
-+ * (http://www.coritel.it/projects/sofia/nat/)
-+ * Uses Sampsa Ranta's excellent idea on using expectfn to 'bind'
-+ * the unregistered helpers to the conntrack entries.
-+ */
-+
-+
-+#include <linux/module.h>
-+#include <linux/netfilter.h>
-+#include <linux/ip.h>
-+#include <net/checksum.h>
-+#include <net/tcp.h>
-+
-+#include <linux/netfilter_ipv4/lockhelp.h>
-+#include <linux/netfilter_ipv4/ip_conntrack.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_core.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_tuple.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_h323.h>
-+
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("H.323 'brute force' connection tracking module");
-+MODULE_LICENSE("GPL");
-+
-+DECLARE_LOCK(ip_h323_lock);
-+struct module *ip_conntrack_h323 = THIS_MODULE;
-+
-+#define DEBUGP(format, args...)
-+
-+static int h245_help(const struct iphdr *iph, size_t len,
-+		     struct ip_conntrack *ct,
-+		     enum ip_conntrack_info ctinfo)
-+{
-+	struct tcphdr *tcph = (void *)iph + iph->ihl * 4;
-+	unsigned char *data = (unsigned char *) tcph + tcph->doff * 4;
-+	unsigned char *data_limit;
-+	u_int32_t tcplen = len - iph->ihl * 4;
-+	u_int32_t datalen = tcplen - tcph->doff * 4;
-+	int dir = CTINFO2DIR(ctinfo);
-+	struct ip_ct_h225_master *info = &ct->help.ct_h225_info;
-+	struct ip_conntrack_expect expect, *exp = &expect;
-+	struct ip_ct_h225_expect *exp_info = &exp->help.exp_h225_info;
-+	u_int16_t data_port;
-+	u_int32_t data_ip;
-+	unsigned int i;
-+
-+	DEBUGP("ct_h245_help: help entered %u.%u.%u.%u:%u->%u.%u.%u.%u:%u\n",
-+		NIPQUAD(iph->saddr), ntohs(tcph->source),
-+		NIPQUAD(iph->daddr), ntohs(tcph->dest));
-+
-+	/* Can't track connections formed before we registered */
-+	if (!info)
-+		return NF_ACCEPT;
-+		
-+	/* Until there's been traffic both ways, don't look in packets. */
-+	if (ctinfo != IP_CT_ESTABLISHED
-+	    && ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
-+		DEBUGP("ct_h245_help: Conntrackinfo = %u\n", ctinfo);
-+		return NF_ACCEPT;
-+	}
-+
-+	/* Not whole TCP header or too short packet? */
-+	if (tcplen < sizeof(struct tcphdr) || tcplen < tcph->doff * 4 + 5) {
-+		DEBUGP("ct_h245_help: tcplen = %u\n", (unsigned)tcplen);
-+		return NF_ACCEPT;
-+	}
-+
-+	/* Checksum invalid?  Ignore. */
-+	if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
-+			      csum_partial((char *)tcph, tcplen, 0))) {
-+		DEBUGP("ct_h245_help: bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
-+		       tcph, tcplen, NIPQUAD(iph->saddr),
-+		       NIPQUAD(iph->daddr));
-+		return NF_ACCEPT;
-+	}
-+
-+	data_limit = (unsigned char *) data + datalen;
-+	/* bytes: 0123   45
-+	          ipadrr port */
-+	for (i = 0; data < (data_limit - 5); data++, i++) {
-+		memcpy(&data_ip, data, sizeof(u_int32_t));
-+		if (data_ip == iph->saddr) {
-+			memcpy(&data_port, data + 4, sizeof(u_int16_t));
-+			memset(&expect, 0, sizeof(expect));
-+			/* update the H.225 info */
-+			DEBUGP("ct_h245_help: new RTCP/RTP requested %u.%u.%u.%u:->%u.%u.%u.%u:%u\n",
-+				NIPQUAD(ct->tuplehash[!dir].tuple.src.ip),
-+				NIPQUAD(iph->saddr), ntohs(data_port));
-+			LOCK_BH(&ip_h323_lock);
-+			info->is_h225 = H225_PORT + 1;
-+			exp_info->port = data_port;
-+			exp_info->dir = dir;
-+			exp_info->offset = i;
-+
-+			exp->seq = ntohl(tcph->seq) + i;
-+		    
-+			exp->tuple = ((struct ip_conntrack_tuple)
-+				{ { ct->tuplehash[!dir].tuple.src.ip,
-+				    { 0 } },
-+				  { data_ip,
-+				    { data_port },
-+				    IPPROTO_UDP }});
-+			exp->mask = ((struct ip_conntrack_tuple)
-+				{ { 0xFFFFFFFF, { 0 } },
-+				  { 0xFFFFFFFF, { 0xFFFF }, 0xFFFF }});
-+	
-+			exp->expectfn = NULL;
-+			
-+			/* Ignore failure; should only happen with NAT */
-+			ip_conntrack_expect_related(ct, exp);
-+
-+			UNLOCK_BH(&ip_h323_lock);
-+		}
-+	}
-+
-+	return NF_ACCEPT;
-+
-+}
-+
-+/* H.245 helper is not registered! */
-+static struct ip_conntrack_helper h245 = 
-+	{ { NULL, NULL },
-+          "H.245",				/* name */
-+          IP_CT_HELPER_F_REUSE_EXPECT,		/* flags */
-+          NULL,					/* module */
-+          8,					/* max_ expected */
-+          240,					/* timeout */
-+          { { 0, { 0 } },			/* tuple */
-+            { 0, { 0 }, IPPROTO_TCP } },
-+          { { 0, { 0xFFFF } },			/* mask */
-+            { 0, { 0 }, 0xFFFF } },
-+          h245_help				/* helper */
-+	};
-+
-+static int h225_expect(struct ip_conntrack *ct)
-+{
-+	WRITE_LOCK(&ip_conntrack_lock);
-+	ct->helper = &h245;
-+	DEBUGP("h225_expect: helper for %p added\n", ct);
-+	WRITE_UNLOCK(&ip_conntrack_lock);
-+	
-+	return NF_ACCEPT;	/* unused */
-+}
-+
-+static int h225_help(const struct iphdr *iph, size_t len,
-+		     struct ip_conntrack *ct,
-+		     enum ip_conntrack_info ctinfo)
-+{
-+	struct tcphdr *tcph = (void *)iph + iph->ihl * 4;
-+	unsigned char *data = (unsigned char *) tcph + tcph->doff * 4;
-+	unsigned char *data_limit;
-+	u_int32_t tcplen = len - iph->ihl * 4;
-+	u_int32_t datalen = tcplen - tcph->doff * 4;
-+	int dir = CTINFO2DIR(ctinfo);
-+	struct ip_ct_h225_master *info = &ct->help.ct_h225_info;
-+	struct ip_conntrack_expect expect, *exp = &expect;
-+	struct ip_ct_h225_expect *exp_info = &exp->help.exp_h225_info;
-+	u_int16_t data_port;
-+	u_int32_t data_ip;
-+	unsigned int i;
-+	
-+	DEBUGP("ct_h225_help: help entered %u.%u.%u.%u:%u->%u.%u.%u.%u:%u\n",
-+		NIPQUAD(iph->saddr), ntohs(tcph->source),
-+		NIPQUAD(iph->daddr), ntohs(tcph->dest));
-+
-+	/* Can't track connections formed before we registered */
-+	if (!info)
-+		return NF_ACCEPT;
-+
-+	/* Until there's been traffic both ways, don't look in packets. */
-+	if (ctinfo != IP_CT_ESTABLISHED
-+	    && ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
-+		DEBUGP("ct_h225_help: Conntrackinfo = %u\n", ctinfo);
-+		return NF_ACCEPT;
-+	}
-+
-+	/* Not whole TCP header or too short packet? */
-+	if (tcplen < sizeof(struct tcphdr) || tcplen < tcph->doff * 4 + 5) {
-+		DEBUGP("ct_h225_help: tcplen = %u\n", (unsigned)tcplen);
-+		return NF_ACCEPT;
-+	}
-+
-+	/* Checksum invalid?  Ignore. */
-+	if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
-+			      csum_partial((char *)tcph, tcplen, 0))) {
-+		DEBUGP("ct_h225_help: bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
-+		       tcph, tcplen, NIPQUAD(iph->saddr),
-+		       NIPQUAD(iph->daddr));
-+		return NF_ACCEPT;
-+	}
-+	
-+	data_limit = (unsigned char *) data + datalen;
-+	/* bytes: 0123   45
-+	          ipadrr port */
-+	for (i = 0; data < (data_limit - 5); data++, i++) {
-+		memcpy(&data_ip, data, sizeof(u_int32_t));
-+		if (data_ip == iph->saddr) {
-+			memcpy(&data_port, data + 4, sizeof(u_int16_t));
-+			if (data_port == tcph->source) {
-+				/* Signal address */
-+				DEBUGP("ct_h225_help: sourceCallSignalAddress from %u.%u.%u.%u\n",
-+					NIPQUAD(iph->saddr));
-+				/* Update the H.225 info so that NAT can mangle the address/port
-+				   even when we have no expected connection! */
-+#ifdef CONFIG_IP_NF_NAT_NEEDED
-+				LOCK_BH(&ip_h323_lock);
-+				info->dir = dir;
-+				info->seq[IP_CT_DIR_ORIGINAL] = ntohl(tcph->seq) + i;
-+				info->offset[IP_CT_DIR_ORIGINAL] = i;
-+				UNLOCK_BH(&ip_h323_lock);
-+#endif
-+			} else {
-+				memset(&expect, 0, sizeof(expect));
-+
-+				/* update the H.225 info */
-+				LOCK_BH(&ip_h323_lock);
-+				info->is_h225 = H225_PORT;
-+				exp_info->port = data_port;
-+				exp_info->dir = dir;
-+				exp_info->offset = i;
-+
-+				exp->seq = ntohl(tcph->seq) + i;
-+
-+				exp->tuple = ((struct ip_conntrack_tuple)
-+					{ { ct->tuplehash[!dir].tuple.src.ip,
-+					    { 0 } },
-+					  { data_ip,
-+					    { data_port },
-+					    IPPROTO_TCP }});
-+				exp->mask = ((struct ip_conntrack_tuple)
-+					{ { 0xFFFFFFFF, { 0 } },
-+					  { 0xFFFFFFFF, { 0xFFFF }, 0xFFFF }});
-+	
-+				exp->expectfn = h225_expect;
-+				
-+				/* Ignore failure */
-+				ip_conntrack_expect_related(ct, exp);
-+
-+				DEBUGP("ct_h225_help: new H.245 requested %u.%u.%u.%u->%u.%u.%u.%u:%u\n",
-+					NIPQUAD(ct->tuplehash[!dir].tuple.src.ip),
-+					NIPQUAD(iph->saddr), ntohs(data_port));
-+
-+				UNLOCK_BH(&ip_h323_lock);
-+                	}  
-+#ifdef CONFIG_IP_NF_NAT_NEEDED
-+		} else if (data_ip == iph->daddr) {
-+			memcpy(&data_port, data + 4, sizeof(u_int16_t));
-+			if (data_port == tcph->dest) {
-+				/* Signal address */
-+				DEBUGP("ct_h225_help: destCallSignalAddress %u.%u.%u.%u\n",
-+					NIPQUAD(iph->daddr));
-+				/* Update the H.225 info so that NAT can mangle the address/port
-+				   even when we have no expected connection! */
-+				LOCK_BH(&ip_h323_lock);
-+				info->dir = dir;
-+				info->seq[IP_CT_DIR_REPLY] = ntohl(tcph->seq) + i;
-+				info->offset[IP_CT_DIR_REPLY] = i;
-+				UNLOCK_BH(&ip_h323_lock);
-+			}
-+#endif
-+		}
-+	}
-+
-+	return NF_ACCEPT;
-+
-+}
-+
-+static struct ip_conntrack_helper h225 = 
-+	{ { NULL, NULL },
-+	  "H.225",					/* name */
-+	  IP_CT_HELPER_F_REUSE_EXPECT,			/* flags */
-+	  THIS_MODULE,					/* module */
-+	  2,						/* max_expected */
-+	  240,						/* timeout */
-+	  { { 0, { __constant_htons(H225_PORT) } },	/* tuple */
-+	    { 0, { 0 }, IPPROTO_TCP } },
-+	  { { 0, { 0xFFFF } },				/* mask */
-+	    { 0, { 0 }, 0xFFFF } },
-+	  h225_help					/* helper */
-+	};
-+
-+static int __init init(void)
-+{
-+	return ip_conntrack_helper_register(&h225);
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* Unregister H.225 helper */	
-+	ip_conntrack_helper_unregister(&h225);
-+}
-+
-+#ifdef CONFIG_IP_NF_NAT_NEEDED
-+EXPORT_SYMBOL(ip_h323_lock);
-+#endif
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux-2.4.32/net/ipv4/netfilter/ip_nat_h323.c linux-2.4.32.new/net/ipv4/netfilter/ip_nat_h323.c
---- linux-2.4.32/net/ipv4/netfilter/ip_nat_h323.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.new/net/ipv4/netfilter/ip_nat_h323.c	2006-03-01 00:50:18.698113896 +0100
-@@ -0,0 +1,403 @@
-+/* 
-+ * H.323 'brute force' extension for NAT alteration. 
-+ * Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * Based on ip_masq_h323.c for 2.2 kernels from CoRiTel, Sofia project.
-+ * (http://www.coritel.it/projects/sofia/nat.html)
-+ * Uses Sampsa Ranta's excellent idea on using expectfn to 'bind'
-+ * the unregistered helpers to the conntrack entries.
-+ */
-+
-+
-+#include <linux/module.h>
-+#include <linux/netfilter.h>
-+#include <linux/ip.h>
-+#include <net/checksum.h>
-+#include <net/tcp.h>
-+
-+#include <linux/netfilter_ipv4/lockhelp.h>
-+#include <linux/netfilter_ipv4/ip_nat.h>
-+#include <linux/netfilter_ipv4/ip_nat_helper.h>
-+#include <linux/netfilter_ipv4/ip_nat_rule.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_tuple.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_h323.h>
-+
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("H.323 'brute force' connection tracking module");
-+MODULE_LICENSE("GPL");
-+
-+DECLARE_LOCK_EXTERN(ip_h323_lock);
-+struct module *ip_nat_h323 = THIS_MODULE;
-+
-+#define DEBUGP(format, args...)
-+
-+
-+static unsigned int 
-+h225_nat_expected(struct sk_buff **pskb,
-+		  unsigned int hooknum,
-+		  struct ip_conntrack *ct,
-+		  struct ip_nat_info *info);
-+
-+static unsigned int h225_nat_help(struct ip_conntrack *ct,
-+				  struct ip_conntrack_expect *exp,
-+			 	  struct ip_nat_info *info,
-+			 	  enum ip_conntrack_info ctinfo,
-+			 	  unsigned int hooknum,
-+			 	  struct sk_buff **pskb);
-+		  
-+static struct ip_nat_helper h245 = 
-+	{ { NULL, NULL },
-+          "H.245",				/* name */
-+	  0,					/* flags */
-+	  NULL,					/* module */
-+	  { { 0, { 0 } },			/* tuple */
-+	    { 0, { 0 }, IPPROTO_TCP } },
-+	  { { 0, { 0xFFFF } },			/* mask */
-+	    { 0, { 0 }, 0xFFFF } },
-+	  h225_nat_help,			/* helper */
-+	  h225_nat_expected			/* expectfn */
-+	};
-+
-+static unsigned int
-+h225_nat_expected(struct sk_buff **pskb,
-+		  unsigned int hooknum,
-+		  struct ip_conntrack *ct,
-+		  struct ip_nat_info *info)
-+{
-+	struct ip_nat_multi_range mr;
-+	u_int32_t newdstip, newsrcip, newip;
-+	u_int16_t port;
-+	struct ip_ct_h225_expect *exp_info;
-+	struct ip_ct_h225_master *master_info;
-+	struct ip_conntrack *master = master_ct(ct);
-+	unsigned int is_h225, ret;
-+	
-+	IP_NF_ASSERT(info);
-+	IP_NF_ASSERT(master);
-+
-+	IP_NF_ASSERT(!(info->initialized & (1<<HOOK2MANIP(hooknum))));
-+
-+	DEBUGP("h225_nat_expected: We have a connection!\n");
-+	master_info = &ct->master->expectant->help.ct_h225_info;
-+	exp_info = &ct->master->help.exp_h225_info;
-+
-+	LOCK_BH(&ip_h323_lock);
-+
-+	DEBUGP("master: ");
-+	DUMP_TUPLE(&master->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-+	DUMP_TUPLE(&master->tuplehash[IP_CT_DIR_REPLY].tuple);
-+	DEBUGP("conntrack: ");
-+	DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-+	if (exp_info->dir == IP_CT_DIR_ORIGINAL) {
-+		/* Make connection go to the client. */
-+		newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-+		newsrcip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip;
-+		DEBUGP("h225_nat_expected: %u.%u.%u.%u->%u.%u.%u.%u (to client)\n",
-+		       NIPQUAD(newsrcip), NIPQUAD(newdstip));
-+	} else {
-+		/* Make the connection go to the server */
-+		newdstip = master->tuplehash[IP_CT_DIR_REPLY].tuple.src.ip;
-+		newsrcip = master->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-+		DEBUGP("h225_nat_expected: %u.%u.%u.%u->%u.%u.%u.%u (to server)\n",
-+		       NIPQUAD(newsrcip), NIPQUAD(newdstip));
-+	}
-+	port = exp_info->port;
-+	is_h225 = master_info->is_h225 == H225_PORT;
-+	UNLOCK_BH(&ip_h323_lock);
-+	
-+	if (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC)
-+		newip = newsrcip;
-+	else
-+		newip = newdstip;
-+
-+	DEBUGP("h225_nat_expected: IP to %u.%u.%u.%u\n", NIPQUAD(newip));
-+
-+	mr.rangesize = 1;
-+	/* We don't want to manip the per-protocol, just the IPs... */
-+	mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
-+	mr.range[0].min_ip = mr.range[0].max_ip = newip;
-+
-+	/* ... unless we're doing a MANIP_DST, in which case, make
-+	   sure we map to the correct port */
-+	if (HOOK2MANIP(hooknum) == IP_NAT_MANIP_DST) {
-+		mr.range[0].flags |= IP_NAT_RANGE_PROTO_SPECIFIED;
-+		mr.range[0].min = mr.range[0].max
-+			= ((union ip_conntrack_manip_proto)
-+				{ port });
-+	}
-+
-+	ret = ip_nat_setup_info(ct, &mr, hooknum);
-+	
-+	if (is_h225) {
-+		DEBUGP("h225_nat_expected: H.225, setting NAT helper for %p\n", ct);
-+		/* NAT expectfn called with ip_nat_lock write-locked */
-+		info->helper = &h245;
-+	}
-+	return ret;
-+}
-+
-+static int h323_signal_address_fixup(struct ip_conntrack *ct,
-+			      	     struct sk_buff **pskb,
-+			      	     enum ip_conntrack_info ctinfo)
-+{
-+	struct iphdr *iph = (*pskb)->nh.iph;
-+	struct tcphdr *tcph = (void *)iph + iph->ihl*4;
-+	unsigned char *data;
-+	u_int32_t tcplen = (*pskb)->len - iph->ihl*4;
-+	u_int32_t datalen = tcplen - tcph->doff*4;
-+	struct ip_ct_h225_master *info = &ct->help.ct_h225_info; 
-+	u_int32_t newip;
-+	u_int16_t port;
-+	u_int8_t buffer[6];
-+	int i;
-+
-+	MUST_BE_LOCKED(&ip_h323_lock);
-+
-+	DEBUGP("h323_signal_address_fixup: %s %s\n",
-+		between(info->seq[IP_CT_DIR_ORIGINAL], ntohl(tcph->seq), ntohl(tcph->seq) + datalen)
-+			? "yes" : "no",
-+		between(info->seq[IP_CT_DIR_REPLY], ntohl(tcph->seq), ntohl(tcph->seq) + datalen)
-+			? "yes" : "no");
-+	if (!(between(info->seq[IP_CT_DIR_ORIGINAL], ntohl(tcph->seq), ntohl(tcph->seq) + datalen)
-+	      || between(info->seq[IP_CT_DIR_REPLY], ntohl(tcph->seq), ntohl(tcph->seq) + datalen)))
-+		return 1;
-+
-+	DEBUGP("h323_signal_address_fixup: offsets %u + 6  and %u + 6 in %u\n", 
-+		info->offset[IP_CT_DIR_ORIGINAL], 
-+		info->offset[IP_CT_DIR_REPLY],
-+		tcplen);
-+	DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-+	DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
-+
-+	for (i = 0; i < IP_CT_DIR_MAX; i++) {
-+		DEBUGP("h323_signal_address_fixup: %s %s\n",
-+			info->dir == IP_CT_DIR_ORIGINAL ? "original" : "reply",
-+			i == IP_CT_DIR_ORIGINAL ? "caller" : "callee");
-+		if (!between(info->seq[i], ntohl(tcph->seq), 
-+			     ntohl(tcph->seq) + datalen))
-+			continue;
-+		if (!between(info->seq[i] + 6, ntohl(tcph->seq),
-+			     ntohl(tcph->seq) + datalen)) {
-+			/* Partial retransmisison. It's a cracker being funky. */
-+			if (net_ratelimit()) {
-+				printk("H.323_NAT: partial packet %u/6 in %u/%u\n",
-+				     info->seq[i],
-+				     ntohl(tcph->seq),
-+				     ntohl(tcph->seq) + datalen);
-+			}
-+			return 0;
-+		}
-+
-+		/* Change address inside packet to match way we're mapping
-+		   this connection. */
-+		if (i == IP_CT_DIR_ORIGINAL) {
-+			newip = ct->tuplehash[!info->dir].tuple.dst.ip;
-+			port = ct->tuplehash[!info->dir].tuple.dst.u.tcp.port;
-+		} else {
-+			newip = ct->tuplehash[!info->dir].tuple.src.ip;
-+			port = ct->tuplehash[!info->dir].tuple.src.u.tcp.port;
-+		}
-+
-+		data = (char *) tcph + tcph->doff * 4 + info->offset[i];
-+
-+		DEBUGP("h323_signal_address_fixup: orig %s IP:port %u.%u.%u.%u:%u\n", 
-+			i == IP_CT_DIR_ORIGINAL ? "source" : "dest  ", 
-+		        data[0], data[1], data[2], data[3],
-+		        (data[4] << 8 | data[5]));
-+
-+		/* Modify the packet */
-+		memcpy(buffer, &newip, 4);
-+		memcpy(buffer + 4, &port, 2);
-+		if (!ip_nat_mangle_tcp_packet(pskb, ct, ctinfo, info->offset[i],
-+					      6, buffer, 6))
-+			return 0;
-+
-+		DEBUGP("h323_signal_address_fixup:  new %s IP:port %u.%u.%u.%u:%u\n", 
-+			i == IP_CT_DIR_ORIGINAL ? "source" : "dest  ", 
-+		        data[0], data[1], data[2], data[3],
-+		        (data[4] << 8 | data[5]));
-+	}
-+
-+	return 1;
-+}
-+
-+static int h323_data_fixup(struct ip_ct_h225_expect *info,
-+			   struct ip_conntrack *ct,
-+			   struct sk_buff **pskb,
-+			   enum ip_conntrack_info ctinfo,
-+			   struct ip_conntrack_expect *expect)
-+{
-+	u_int32_t newip;
-+	u_int16_t port;
-+	u_int8_t buffer[6];
-+	struct ip_conntrack_tuple newtuple;
-+	struct iphdr *iph = (*pskb)->nh.iph;
-+	struct tcphdr *tcph = (void *)iph + iph->ihl*4;
-+	unsigned char *data;
-+	u_int32_t tcplen = (*pskb)->len - iph->ihl*4;
-+	struct ip_ct_h225_master *master_info = &ct->help.ct_h225_info;
-+	int is_h225;
-+
-+	MUST_BE_LOCKED(&ip_h323_lock);
-+	DEBUGP("h323_data_fixup: offset %u + 6 in %u\n", info->offset, tcplen);
-+	DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-+	DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
-+
-+	if (!between(expect->seq + 6, ntohl(tcph->seq),
-+		    ntohl(tcph->seq) + tcplen - tcph->doff * 4)) {
-+		/* Partial retransmisison. It's a cracker being funky. */
-+		if (net_ratelimit()) {
-+			printk("H.323_NAT: partial packet %u/6 in %u/%u\n",
-+			     expect->seq,
-+			     ntohl(tcph->seq),
-+			     ntohl(tcph->seq) + tcplen - tcph->doff * 4);
-+		}
-+		return 0;
-+	}
-+
-+	/* Change address inside packet to match way we're mapping
-+	   this connection. */
-+	if (info->dir == IP_CT_DIR_REPLY) {
-+		/* Must be where client thinks server is */
-+		newip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip;
-+		/* Expect something from client->server */
-+		newtuple.src.ip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-+		newtuple.dst.ip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip;
-+	} else {
-+		/* Must be where server thinks client is */
-+		newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-+		/* Expect something from server->client */
-+		newtuple.src.ip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.ip;
-+		newtuple.dst.ip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-+	}
-+
-+	is_h225 = (master_info->is_h225 == H225_PORT);
-+
-+	if (is_h225) {
-+		newtuple.dst.protonum = IPPROTO_TCP;
-+		newtuple.src.u.tcp.port = expect->tuple.src.u.tcp.port;
-+	} else {
-+		newtuple.dst.protonum = IPPROTO_UDP;
-+		newtuple.src.u.udp.port = expect->tuple.src.u.udp.port;
-+	}
-+	
-+	/* Try to get same port: if not, try to change it. */
-+	for (port = ntohs(info->port); port != 0; port++) {
-+		if (is_h225)
-+			newtuple.dst.u.tcp.port = htons(port);
-+		else
-+			newtuple.dst.u.udp.port = htons(port);
-+
-+		if (ip_conntrack_change_expect(expect, &newtuple) == 0)
-+			break;
-+	}
-+	if (port == 0) {
-+		DEBUGP("h323_data_fixup: no free port found!\n");
-+		return 0;
-+	}
-+
-+	port = htons(port);
-+
-+	data = (char *) tcph + tcph->doff * 4 + info->offset;
-+
-+	DEBUGP("h323_data_fixup: orig IP:port %u.%u.%u.%u:%u\n", 
-+	        data[0], data[1], data[2], data[3],
-+	        (data[4] << 8 | data[5]));
-+
-+	/* Modify the packet */
-+	memcpy(buffer, &newip, 4);
-+	memcpy(buffer + 4, &port, 2);
-+	if (!ip_nat_mangle_tcp_packet(pskb, ct, ctinfo, info->offset,
-+				      6, buffer, 6))
-+		return 0;
-+	
-+	DEBUGP("h323_data_fixup: new IP:port %u.%u.%u.%u:%u\n", 
-+	        data[0], data[1], data[2], data[3],
-+	        (data[4] << 8 | data[5]));
-+
-+	return 1;
-+}
-+
-+static unsigned int h225_nat_help(struct ip_conntrack *ct,
-+				  struct ip_conntrack_expect *exp,
-+			 	  struct ip_nat_info *info,
-+			 	  enum ip_conntrack_info ctinfo,
-+			 	  unsigned int hooknum,
-+			 	  struct sk_buff **pskb)
-+{
-+	int dir;
-+	struct ip_ct_h225_expect *exp_info;
-+	
-+	/* Only mangle things once: original direction in POST_ROUTING
-+	   and reply direction on PRE_ROUTING. */
-+	dir = CTINFO2DIR(ctinfo);
-+	DEBUGP("nat_h323: dir %s at hook %s\n",
-+	       dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY",
-+	       hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-+	       : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-+	       : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT" : "???");
-+	if (!((hooknum == NF_IP_POST_ROUTING && dir == IP_CT_DIR_ORIGINAL)
-+	      || (hooknum == NF_IP_PRE_ROUTING && dir == IP_CT_DIR_REPLY))) {
-+		DEBUGP("nat_h323: Not touching dir %s at hook %s\n",
-+		       dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY",
-+		       hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-+		       : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-+		       : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT" : "???");
-+		return NF_ACCEPT;
-+	}
-+
-+	if (!exp) {
-+		LOCK_BH(&ip_h323_lock);
-+		if (!h323_signal_address_fixup(ct, pskb, ctinfo)) {
-+			UNLOCK_BH(&ip_h323_lock);
-+			return NF_DROP;
-+		}
-+		UNLOCK_BH(&ip_h323_lock);
-+		return NF_ACCEPT;
-+	}
-+		
-+	exp_info = &exp->help.exp_h225_info;
-+
-+	LOCK_BH(&ip_h323_lock);
-+	if (!h323_data_fixup(exp_info, ct, pskb, ctinfo, exp)) {
-+		UNLOCK_BH(&ip_h323_lock);
-+		return NF_DROP;
-+	}
-+	UNLOCK_BH(&ip_h323_lock);
-+
-+	return NF_ACCEPT;
-+}
-+
-+static struct ip_nat_helper h225 = 
-+	{ { NULL, NULL },
-+	  "H.225",					/* name */
-+	  IP_NAT_HELPER_F_ALWAYS, 			/* flags */
-+	  THIS_MODULE,					/* module */
-+	  { { 0, { __constant_htons(H225_PORT) } },	/* tuple */
-+	    { 0, { 0 }, IPPROTO_TCP } },
-+	  { { 0, { 0xFFFF } },				/* mask */
-+	    { 0, { 0 }, 0xFFFF } },
-+	  h225_nat_help,				/* helper */
-+	  h225_nat_expected				/* expectfn */
-+	};
-+
-+static int __init init(void)
-+{
-+	int ret;
-+	
-+	ret = ip_nat_helper_register(&h225);
-+
-+	if (ret != 0)
-+		printk("ip_nat_h323: cannot initialize the module!\n");
-+
-+	return ret;
-+}
-+
-+static void __exit fini(void)
-+{
-+	ip_nat_helper_unregister(&h225);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux-2.4.32/include/linux/netfilter_ipv4/ip_conntrack.h linux-2.4.32.new/include/linux/netfilter_ipv4/ip_conntrack.h
---- linux-2.4.32/include/linux/netfilter_ipv4/ip_conntrack.h	2006-03-01 00:49:36.474532856 +0100
-+++ linux-2.4.32.new/include/linux/netfilter_ipv4/ip_conntrack.h	2006-03-01 00:50:18.699113744 +0100
-@@ -71,6 +71,7 @@
- #include <linux/netfilter_ipv4/ip_conntrack_ftp.h>
- #include <linux/netfilter_ipv4/ip_conntrack_irc.h>
- #include <linux/netfilter_ipv4/ip_conntrack_pptp.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_h323.h>
- 
- /* per expectation: application helper private data */
- union ip_conntrack_expect_help {
-@@ -79,6 +80,7 @@
- 	struct ip_ct_ftp_expect exp_ftp_info;
- 	struct ip_ct_irc_expect exp_irc_info;
- 	struct ip_ct_pptp_expect exp_pptp_info;
-+	struct ip_ct_h225_expect exp_h225_info;
- 
- #ifdef CONFIG_IP_NF_NAT_NEEDED
- 	union {
-@@ -93,6 +95,7 @@
- 	struct ip_ct_ftp_master ct_ftp_info;
- 	struct ip_ct_irc_master ct_irc_info;
- 	struct ip_ct_pptp_master ct_pptp_info;
-+	struct ip_ct_h225_master ct_h225_info;
- };
- 
- #ifdef CONFIG_IP_NF_NAT_NEEDED
-diff -urN linux-2.4.32/include/linux/netfilter_ipv4/ip_conntrack_h323.h linux-2.4.32.new/include/linux/netfilter_ipv4/ip_conntrack_h323.h
---- linux-2.4.32/include/linux/netfilter_ipv4/ip_conntrack_h323.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.new/include/linux/netfilter_ipv4/ip_conntrack_h323.h	2006-03-01 00:50:18.700113592 +0100
-@@ -0,0 +1,30 @@
-+#ifndef _IP_CONNTRACK_H323_H
-+#define _IP_CONNTRACK_H323_H
-+/* H.323 connection tracking. */
-+
-+#ifdef __KERNEL__
-+/* Protects H.323 related data */
-+DECLARE_LOCK_EXTERN(ip_h323_lock);
-+#endif
-+
-+/* Default H.225 port */
-+#define H225_PORT	1720
-+
-+/* This structure is per expected connection */
-+struct ip_ct_h225_expect {
-+	u_int16_t port;			/* Port of the H.225 helper/RTCP/RTP channel */
-+	enum ip_conntrack_dir dir;	/* Direction of the original connection */
-+	unsigned int offset;		/* offset of the address in the payload */
-+};
-+
-+/* This structure exists only once per master */
-+struct ip_ct_h225_master {
-+	int is_h225;				/* H.225 or H.245 connection */
-+#ifdef CONFIG_IP_NF_NAT_NEEDED
-+	enum ip_conntrack_dir dir;		/* Direction of the original connection */
-+	u_int32_t seq[IP_CT_DIR_MAX];		/* Exceptional packet mangling for signal addressess... */
-+	unsigned int offset[IP_CT_DIR_MAX];	/* ...and the offset of the addresses in the payload */
-+#endif
-+};
-+
-+#endif /* _IP_CONNTRACK_H323_H */
diff --git a/openwrt/target/linux/generic-2.4/patches/614-netfilter_nat_rtsp.patch b/openwrt/target/linux/generic-2.4/patches/614-netfilter_nat_rtsp.patch
deleted file mode 100644
index 6ae3e7b0aa..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/614-netfilter_nat_rtsp.patch
+++ /dev/null
@@ -1,1523 +0,0 @@
-diff -urN linux-2.4.32/net/ipv4/netfilter/Config.in linux-2.4.32.new/net/ipv4/netfilter/Config.in
---- linux-2.4.32/net/ipv4/netfilter/Config.in	2006-03-01 00:53:57.884792456 +0100
-+++ linux-2.4.32.new/net/ipv4/netfilter/Config.in	2006-03-01 00:55:14.462150928 +0100
-@@ -16,6 +16,7 @@
-   dep_tristate '  GRE protocol support' CONFIG_IP_NF_CT_PROTO_GRE $CONFIG_IP_NF_CONNTRACK
-   dep_tristate '   PPTP protocol support' CONFIG_IP_NF_PPTP $CONFIG_IP_NF_CT_PROTO_GRE
-   dep_tristate '  H.323 (netmeeting) support' CONFIG_IP_NF_H323 $CONFIG_IP_NF_CONNTRACK
-+  dep_tristate '  RTSP protocol support' CONFIG_IP_NF_RTSP $CONFIG_IP_NF_CONNTRACK
- fi
- 
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-@@ -119,6 +120,13 @@
-          define_tristate CONFIG_IP_NF_NAT_H323 $CONFIG_IP_NF_NAT
-        fi
-       fi
-+      if [ "$CONFIG_IP_NF_RTSP" = "m" ]; then
-+        define_tristate CONFIG_IP_NF_NAT_RTSP m
-+      else
-+       if [ "$CONFIG_IP_NF_RTSP" = "y" ]; then
-+         define_tristate CONFIG_IP_NF_NAT_RTSP $CONFIG_IP_NF_NAT
-+       fi
-+      fi
-       if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-         dep_tristate '    Basic SNMP-ALG support (EXPERIMENTAL)' CONFIG_IP_NF_NAT_SNMP_BASIC $CONFIG_IP_NF_NAT
-       fi
-diff -urN linux-2.4.32/net/ipv4/netfilter/Makefile linux-2.4.32.new/net/ipv4/netfilter/Makefile
---- linux-2.4.32/net/ipv4/netfilter/Makefile	2006-03-01 00:53:57.886792152 +0100
-+++ linux-2.4.32.new/net/ipv4/netfilter/Makefile	2006-03-01 00:55:14.463150776 +0100
-@@ -57,6 +57,11 @@
- ifdef CONFIG_IP_NF_NAT_H323
-        export-objs += ip_conntrack_h323.o
- endif
-+obj-$(CONFIG_IP_NF_RTSP) += ip_conntrack_rtsp.o
-+ifdef CONFIG_IP_NF_NAT_RTSP
-+       export-objs += ip_conntrack_rtsp.o
-+endif
-+
- 
- 
- # NAT helpers 
-@@ -67,6 +72,7 @@
- obj-$(CONFIG_IP_NF_NAT_PROTO_GRE) += ip_nat_proto_gre.o
- obj-$(CONFIG_IP_NF_NAT_PPTP) += ip_nat_pptp.o
- obj-$(CONFIG_IP_NF_NAT_H323) += ip_nat_h323.o
-+obj-$(CONFIG_IP_NF_NAT_RTSP) += ip_nat_rtsp.o
- 
- # generic IP tables 
- obj-$(CONFIG_IP_NF_IPTABLES) += ip_tables.o
-diff -urN linux-2.4.32/net/ipv4/netfilter/ip_conntrack_rtsp.c linux-2.4.32.new/net/ipv4/netfilter/ip_conntrack_rtsp.c
---- linux-2.4.32/net/ipv4/netfilter/ip_conntrack_rtsp.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.new/net/ipv4/netfilter/ip_conntrack_rtsp.c	2006-03-01 00:55:14.465150472 +0100
-@@ -0,0 +1,507 @@
-+/*
-+ * RTSP extension for IP connection tracking
-+ * (C) 2003 by Tom Marshall <tmarshall@real.com>
-+ * based on ip_conntrack_irc.c
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ * Module load syntax:
-+ *   insmod ip_conntrack_rtsp.o ports=port1,port2,...port<MAX_PORTS>
-+ *                              max_outstanding=n setup_timeout=secs
-+ *
-+ * If no ports are specified, the default will be port 554.
-+ *
-+ * With max_outstanding you can define the maximum number of not yet
-+ * answered SETUP requests per RTSP session (default 8).
-+ * With setup_timeout you can specify how long the system waits for
-+ * an expected data channel (default 300 seconds).
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/netfilter.h>
-+#include <linux/ip.h>
-+#include <net/checksum.h>
-+#include <net/tcp.h>
-+
-+#include <linux/netfilter_ipv4/lockhelp.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_rtsp.h>
-+
-+#include <linux/ctype.h>
-+#define NF_NEED_STRNCASECMP
-+#define NF_NEED_STRTOU16
-+#define NF_NEED_STRTOU32
-+#define NF_NEED_NEXTLINE
-+#include <linux/netfilter_helpers.h>
-+#define NF_NEED_MIME_NEXTLINE
-+#include <linux/netfilter_mime.h>
-+
-+#define MAX_SIMUL_SETUP 8 /* XXX: use max_outstanding */
-+
-+#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
-+#ifdef IP_NF_RTSP_DEBUG
-+#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
-+#else
-+#define DEBUGP(fmt, args...)
-+#endif
-+
-+#define MAX_PORTS 8
-+static int ports[MAX_PORTS];
-+static int num_ports = 0;
-+static int max_outstanding = 8;
-+static unsigned int setup_timeout = 300;
-+
-+MODULE_AUTHOR("Tom Marshall <tmarshall@real.com>");
-+MODULE_DESCRIPTION("RTSP connection tracking module");
-+MODULE_LICENSE("GPL");
-+#ifdef MODULE_PARM
-+MODULE_PARM(ports, "1-" __MODULE_STRING(MAX_PORTS) "i");
-+MODULE_PARM_DESC(ports, "port numbers of RTSP servers");
-+MODULE_PARM(max_outstanding, "i");
-+MODULE_PARM_DESC(max_outstanding, "max number of outstanding SETUP requests per RTSP session");
-+MODULE_PARM(setup_timeout, "i");
-+MODULE_PARM_DESC(setup_timeout, "timeout on for unestablished data channels");
-+#endif
-+
-+DECLARE_LOCK(ip_rtsp_lock);
-+struct module* ip_conntrack_rtsp = THIS_MODULE;
-+
-+/*
-+ * Max mappings we will allow for one RTSP connection (for RTP, the number
-+ * of allocated ports is twice this value).  Note that SMIL burns a lot of
-+ * ports so keep this reasonably high.  If this is too low, you will see a
-+ * lot of "no free client map entries" messages.
-+ */
-+#define MAX_PORT_MAPS 16
-+
-+/*** default port list was here in the masq code: 554, 3030, 4040 ***/
-+
-+#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
-+
-+/*
-+ * Parse an RTSP packet.
-+ *
-+ * Returns zero if parsing failed.
-+ *
-+ * Parameters:
-+ *  IN      ptcp        tcp data pointer
-+ *  IN      tcplen      tcp data len
-+ *  IN/OUT  ptcpoff     points to current tcp offset
-+ *  OUT     phdrsoff    set to offset of rtsp headers
-+ *  OUT     phdrslen    set to length of rtsp headers
-+ *  OUT     pcseqoff    set to offset of CSeq header
-+ *  OUT     pcseqlen    set to length of CSeq header
-+ */
-+static int
-+rtsp_parse_message(char* ptcp, uint tcplen, uint* ptcpoff,
-+                   uint* phdrsoff, uint* phdrslen,
-+                   uint* pcseqoff, uint* pcseqlen)
-+{
-+    uint    entitylen = 0;
-+    uint    lineoff;
-+    uint    linelen;
-+
-+    if (!nf_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen))
-+    {
-+        return 0;
-+    }
-+
-+    *phdrsoff = *ptcpoff;
-+    while (nf_mime_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen))
-+    {
-+        if (linelen == 0)
-+        {
-+            if (entitylen > 0)
-+            {
-+                *ptcpoff += min(entitylen, tcplen - *ptcpoff);
-+            }
-+            break;
-+        }
-+        if (lineoff+linelen > tcplen)
-+        {
-+            INFOP("!! overrun !!\n");
-+            break;
-+        }
-+
-+        if (nf_strncasecmp(ptcp+lineoff, "CSeq:", 5) == 0)
-+        {
-+            *pcseqoff = lineoff;
-+            *pcseqlen = linelen;
-+        }
-+        if (nf_strncasecmp(ptcp+lineoff, "Content-Length:", 15) == 0)
-+        {
-+            uint off = lineoff+15;
-+            SKIP_WSPACE(ptcp+lineoff, linelen, off);
-+            nf_strtou32(ptcp+off, &entitylen);
-+        }
-+    }
-+    *phdrslen = (*ptcpoff) - (*phdrsoff);
-+
-+    return 1;
-+}
-+
-+/*
-+ * Find lo/hi client ports (if any) in transport header
-+ * In:
-+ *   ptcp, tcplen = packet
-+ *   tranoff, tranlen = buffer to search
-+ *
-+ * Out:
-+ *   pport_lo, pport_hi = lo/hi ports (host endian)
-+ *
-+ * Returns nonzero if any client ports found
-+ *
-+ * Note: it is valid (and expected) for the client to request multiple
-+ * transports, so we need to parse the entire line.
-+ */
-+static int
-+rtsp_parse_transport(char* ptran, uint tranlen,
-+                     struct ip_ct_rtsp_expect* prtspexp)
-+{
-+    int     rc = 0;
-+    uint    off = 0;
-+
-+    if (tranlen < 10 || !iseol(ptran[tranlen-1]) ||
-+        nf_strncasecmp(ptran, "Transport:", 10) != 0)
-+    {
-+        INFOP("sanity check failed\n");
-+        return 0;
-+    }
-+    DEBUGP("tran='%.*s'\n", (int)tranlen, ptran);
-+    off += 10;
-+    SKIP_WSPACE(ptran, tranlen, off);
-+
-+    /* Transport: tran;field;field=val,tran;field;field=val,... */
-+    while (off < tranlen)
-+    {
-+        const char* pparamend;
-+        uint        nextparamoff;
-+
-+        pparamend = memchr(ptran+off, ',', tranlen-off);
-+        pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
-+        nextparamoff = pparamend-ptran;
-+
-+        while (off < nextparamoff)
-+        {
-+            const char* pfieldend;
-+            uint        nextfieldoff;
-+
-+            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
-+            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
-+
-+            if (strncmp(ptran+off, "client_port=", 12) == 0)
-+            {
-+                u_int16_t   port;
-+                uint        numlen;
-+
-+                off += 12;
-+                numlen = nf_strtou16(ptran+off, &port);
-+                off += numlen;
-+                if (prtspexp->loport != 0 && prtspexp->loport != port)
-+                {
-+                    DEBUGP("multiple ports found, port %hu ignored\n", port);
-+                }
-+                else
-+                {
-+                    prtspexp->loport = prtspexp->hiport = port;
-+                    if (ptran[off] == '-')
-+                    {
-+                        off++;
-+                        numlen = nf_strtou16(ptran+off, &port);
-+                        off += numlen;
-+                        prtspexp->pbtype = pb_range;
-+                        prtspexp->hiport = port;
-+
-+                        // If we have a range, assume rtp:
-+                        // loport must be even, hiport must be loport+1
-+                        if ((prtspexp->loport & 0x0001) != 0 ||
-+                            prtspexp->hiport != prtspexp->loport+1)
-+                        {
-+                            DEBUGP("incorrect range: %hu-%hu, correcting\n",
-+                                   prtspexp->loport, prtspexp->hiport);
-+                            prtspexp->loport &= 0xfffe;
-+                            prtspexp->hiport = prtspexp->loport+1;
-+                        }
-+                    }
-+                    else if (ptran[off] == '/')
-+                    {
-+                        off++;
-+                        numlen = nf_strtou16(ptran+off, &port);
-+                        off += numlen;
-+                        prtspexp->pbtype = pb_discon;
-+                        prtspexp->hiport = port;
-+                    }
-+                    rc = 1;
-+                }
-+            }
-+
-+            /*
-+             * Note we don't look for the destination parameter here.
-+             * If we are using NAT, the NAT module will handle it.  If not,
-+             * and the client is sending packets elsewhere, the expectation
-+             * will quietly time out.
-+             */
-+
-+            off = nextfieldoff;
-+        }
-+
-+        off = nextparamoff;
-+    }
-+
-+    return rc;
-+}
-+
-+/*** conntrack functions ***/
-+
-+/* outbound packet: client->server */
-+static int
-+help_out(const struct iphdr* iph, size_t pktlen,
-+                struct ip_conntrack* ct, enum ip_conntrack_info ctinfo)
-+{
-+    int dir = CTINFO2DIR(ctinfo);   /* = IP_CT_DIR_ORIGINAL */
-+    struct  tcphdr* tcph = (void*)iph + iph->ihl * 4;
-+    uint    tcplen = pktlen - iph->ihl * 4;
-+    char*   pdata = (char*)tcph + tcph->doff * 4;
-+    uint    datalen = tcplen - tcph->doff * 4;
-+    uint    dataoff = 0;
-+
-+    struct ip_conntrack_expect exp;
-+
-+    while (dataoff < datalen)
-+    {
-+        uint    cmdoff = dataoff;
-+        uint    hdrsoff = 0;
-+        uint    hdrslen = 0;
-+        uint    cseqoff = 0;
-+        uint    cseqlen = 0;
-+        uint    lineoff = 0;
-+        uint    linelen = 0;
-+        uint    off;
-+        int     rc;
-+
-+        if (!rtsp_parse_message(pdata, datalen, &dataoff,
-+                                &hdrsoff, &hdrslen,
-+                                &cseqoff, &cseqlen))
-+        {
-+            break;      /* not a valid message */
-+        }
-+
-+        if (strncmp(pdata+cmdoff, "SETUP ", 6) != 0)
-+        {
-+            continue;   /* not a SETUP message */
-+        }
-+        DEBUGP("found a setup message\n");
-+
-+        memset(&exp, 0, sizeof(exp));
-+
-+        off = 0;
-+        while (nf_mime_nextline(pdata+hdrsoff, hdrslen, &off,
-+                                &lineoff, &linelen))
-+        {
-+            if (linelen == 0)
-+            {
-+                break;
-+            }
-+            if (off > hdrsoff+hdrslen)
-+            {
-+                INFOP("!! overrun !!");
-+                break;
-+            }
-+
-+            if (nf_strncasecmp(pdata+hdrsoff+lineoff, "Transport:", 10) == 0)
-+            {
-+                rtsp_parse_transport(pdata+hdrsoff+lineoff, linelen,
-+                                     &exp.help.exp_rtsp_info);
-+            }
-+        }
-+
-+        if (exp.help.exp_rtsp_info.loport == 0)
-+        {
-+            DEBUGP("no udp transports found\n");
-+            continue;   /* no udp transports found */
-+        }
-+
-+        DEBUGP("udp transport found, ports=(%d,%hu,%hu)\n",
-+              (int)exp.help.exp_rtsp_info.pbtype,
-+              exp.help.exp_rtsp_info.loport,
-+              exp.help.exp_rtsp_info.hiport);
-+
-+        LOCK_BH(&ip_rtsp_lock);
-+        exp.seq = ntohl(tcph->seq) + hdrsoff; /* mark all the headers */
-+        exp.help.exp_rtsp_info.len = hdrslen;
-+
-+        exp.tuple.src.ip = ct->tuplehash[!dir].tuple.src.ip;
-+        exp.mask.src.ip  = 0xffffffff;
-+        exp.tuple.dst.ip = ct->tuplehash[dir].tuple.src.ip;
-+        exp.mask.dst.ip  = 0xffffffff;
-+        exp.tuple.dst.u.udp.port = exp.help.exp_rtsp_info.loport;
-+        exp.mask.dst.u.udp.port  = (exp.help.exp_rtsp_info.pbtype == pb_range) ? 0xfffe : 0xffff;
-+        exp.tuple.dst.protonum = IPPROTO_UDP;
-+        exp.mask.dst.protonum  = 0xffff;
-+
-+        DEBUGP("expect_related %u.%u.%u.%u:%u-%u.%u.%u.%u:%u\n",
-+                NIPQUAD(exp.tuple.src.ip),
-+                ntohs(exp.tuple.src.u.tcp.port),
-+                NIPQUAD(exp.tuple.dst.ip),
-+                ntohs(exp.tuple.dst.u.tcp.port));
-+
-+        /* pass the request off to the nat helper */
-+        rc = ip_conntrack_expect_related(ct, &exp);
-+        UNLOCK_BH(&ip_rtsp_lock);
-+        if (rc == 0)
-+        {
-+            DEBUGP("ip_conntrack_expect_related succeeded\n");
-+        }
-+        else
-+        {
-+            INFOP("ip_conntrack_expect_related failed (%d)\n", rc);
-+        }
-+    }
-+
-+    return NF_ACCEPT;
-+}
-+
-+/* inbound packet: server->client */
-+static int
-+help_in(const struct iphdr* iph, size_t pktlen,
-+                struct ip_conntrack* ct, enum ip_conntrack_info ctinfo)
-+{
-+    return NF_ACCEPT;
-+}
-+
-+static int
-+help(const struct iphdr* iph, size_t pktlen,
-+                struct ip_conntrack* ct, enum ip_conntrack_info ctinfo)
-+{
-+    /* tcplen not negative guarenteed by ip_conntrack_tcp.c */
-+    struct tcphdr* tcph = (void*)iph + iph->ihl * 4;
-+    u_int32_t tcplen = pktlen - iph->ihl * 4;
-+
-+    /* Until there's been traffic both ways, don't look in packets. */
-+    if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY)
-+    {
-+        DEBUGP("conntrackinfo = %u\n", ctinfo);
-+        return NF_ACCEPT;
-+    }
-+
-+    /* Not whole TCP header? */
-+    if (tcplen < sizeof(struct tcphdr) || tcplen < tcph->doff * 4)
-+    {
-+        DEBUGP("tcplen = %u\n", (unsigned)tcplen);
-+        return NF_ACCEPT;
-+    }
-+
-+    /* Checksum invalid?  Ignore. */
-+    /* FIXME: Source route IP option packets --RR */
-+    if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
-+                     csum_partial((char*)tcph, tcplen, 0)))
-+    {
-+        DEBUGP("bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
-+               tcph, tcplen, NIPQUAD(iph->saddr), NIPQUAD(iph->daddr));
-+        return NF_ACCEPT;
-+    }
-+
-+    switch (CTINFO2DIR(ctinfo))
-+    {
-+    case IP_CT_DIR_ORIGINAL:
-+        help_out(iph, pktlen, ct, ctinfo);
-+        break;
-+    case IP_CT_DIR_REPLY:
-+        help_in(iph, pktlen, ct, ctinfo);
-+        break;
-+    }
-+
-+    return NF_ACCEPT;
-+}
-+
-+static struct ip_conntrack_helper rtsp_helpers[MAX_PORTS];
-+static char rtsp_names[MAX_PORTS][10];
-+
-+/* This function is intentionally _NOT_ defined as __exit */
-+static void
-+fini(void)
-+{
-+    int i;
-+    for (i = 0; i < num_ports; i++)
-+    {
-+        DEBUGP("unregistering port %d\n", ports[i]);
-+        ip_conntrack_helper_unregister(&rtsp_helpers[i]);
-+    }
-+}
-+
-+static int __init
-+init(void)
-+{
-+    int i, ret;
-+    struct ip_conntrack_helper *hlpr;
-+    char *tmpname;
-+
-+    printk("ip_conntrack_rtsp v" IP_NF_RTSP_VERSION " loading\n");
-+
-+    if (max_outstanding < 1)
-+    {
-+        printk("ip_conntrack_rtsp: max_outstanding must be a positive integer\n");
-+        return -EBUSY;
-+    }
-+    if (setup_timeout < 0)
-+    {
-+        printk("ip_conntrack_rtsp: setup_timeout must be a positive integer\n");
-+        return -EBUSY;
-+    }
-+
-+    /* If no port given, default to standard rtsp port */
-+    if (ports[0] == 0)
-+    {
-+        ports[0] = RTSP_PORT;
-+    }
-+
-+    for (i = 0; (i < MAX_PORTS) && ports[i]; i++)
-+    {
-+        hlpr = &rtsp_helpers[i];
-+        memset(hlpr, 0, sizeof(struct ip_conntrack_helper));
-+        hlpr->tuple.src.u.tcp.port = htons(ports[i]);
-+        hlpr->tuple.dst.protonum = IPPROTO_TCP;
-+        hlpr->mask.src.u.tcp.port = 0xFFFF;
-+        hlpr->mask.dst.protonum = 0xFFFF;
-+        hlpr->max_expected = max_outstanding;
-+        hlpr->timeout = setup_timeout;
-+        hlpr->flags = IP_CT_HELPER_F_REUSE_EXPECT;
-+        hlpr->me = ip_conntrack_rtsp;
-+        hlpr->help = help;
-+
-+        tmpname = &rtsp_names[i][0];
-+        if (ports[i] == RTSP_PORT)
-+        {
-+            sprintf(tmpname, "rtsp");
-+        }
-+        else
-+        {
-+            sprintf(tmpname, "rtsp-%d", i);
-+        }
-+        hlpr->name = tmpname;
-+
-+        DEBUGP("port #%d: %d\n", i, ports[i]);
-+
-+        ret = ip_conntrack_helper_register(hlpr);
-+
-+        if (ret)
-+        {
-+            printk("ip_conntrack_rtsp: ERROR registering port %d\n", ports[i]);
-+            fini();
-+            return -EBUSY;
-+        }
-+        num_ports++;
-+    }
-+    return 0;
-+}
-+
-+#ifdef CONFIG_IP_NF_NAT_NEEDED
-+EXPORT_SYMBOL(ip_rtsp_lock);
-+#endif
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux-2.4.32/net/ipv4/netfilter/ip_nat_rtsp.c linux-2.4.32.new/net/ipv4/netfilter/ip_nat_rtsp.c
---- linux-2.4.32/net/ipv4/netfilter/ip_nat_rtsp.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.new/net/ipv4/netfilter/ip_nat_rtsp.c	2006-03-01 00:55:14.467150168 +0100
-@@ -0,0 +1,621 @@
-+/*
-+ * RTSP extension for TCP NAT alteration
-+ * (C) 2003 by Tom Marshall <tmarshall@real.com>
-+ * based on ip_nat_irc.c
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ * Module load syntax:
-+ *      insmod ip_nat_rtsp.o ports=port1,port2,...port<MAX_PORTS>
-+ *                           stunaddr=<address>
-+ *                           destaction=[auto|strip|none]
-+ *
-+ * If no ports are specified, the default will be port 554 only.
-+ *
-+ * stunaddr specifies the address used to detect that a client is using STUN.
-+ * If this address is seen in the destination parameter, it is assumed that
-+ * the client has already punched a UDP hole in the firewall, so we don't
-+ * mangle the client_port.  If none is specified, it is autodetected.  It
-+ * only needs to be set if you have multiple levels of NAT.  It should be
-+ * set to the external address that the STUN clients detect.  Note that in
-+ * this case, it will not be possible for clients to use UDP with servers
-+ * between the NATs.
-+ *
-+ * If no destaction is specified, auto is used.
-+ *   destaction=auto:  strip destination parameter if it is not stunaddr.
-+ *   destaction=strip: always strip destination parameter (not recommended).
-+ *   destaction=none:  do not touch destination parameter (not recommended).
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/netfilter_ipv4.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <linux/kernel.h>
-+#include <net/tcp.h>
-+#include <linux/netfilter_ipv4/ip_nat.h>
-+#include <linux/netfilter_ipv4/ip_nat_helper.h>
-+#include <linux/netfilter_ipv4/ip_nat_rule.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_rtsp.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
-+
-+#include <linux/inet.h>
-+#include <linux/ctype.h>
-+#define NF_NEED_STRNCASECMP
-+#define NF_NEED_STRTOU16
-+#include <linux/netfilter_helpers.h>
-+#define NF_NEED_MIME_NEXTLINE
-+#include <linux/netfilter_mime.h>
-+
-+#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
-+#ifdef IP_NF_RTSP_DEBUG
-+#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
-+#else
-+#define DEBUGP(fmt, args...)
-+#endif
-+
-+#define MAX_PORTS       8
-+#define DSTACT_AUTO     0
-+#define DSTACT_STRIP    1
-+#define DSTACT_NONE     2
-+
-+static int      ports[MAX_PORTS];
-+static char*    stunaddr = NULL;
-+static char*    destaction = NULL;
-+
-+static int       num_ports = 0;
-+static u_int32_t extip = 0;
-+static int       dstact = 0;
-+
-+MODULE_AUTHOR("Tom Marshall <tmarshall@real.com>");
-+MODULE_DESCRIPTION("RTSP network address translation module");
-+MODULE_LICENSE("GPL");
-+#ifdef MODULE_PARM
-+MODULE_PARM(ports, "1-" __MODULE_STRING(MAX_PORTS) "i");
-+MODULE_PARM_DESC(ports, "port numbers of RTSP servers");
-+MODULE_PARM(stunaddr, "s");
-+MODULE_PARM_DESC(stunaddr, "Address for detecting STUN");
-+MODULE_PARM(destaction, "s");
-+MODULE_PARM_DESC(destaction, "Action for destination parameter (auto/strip/none)");
-+#endif
-+
-+/* protects rtsp part of conntracks */
-+DECLARE_LOCK_EXTERN(ip_rtsp_lock);
-+
-+#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
-+
-+/*** helper functions ***/
-+
-+static void
-+get_skb_tcpdata(struct sk_buff* skb, char** pptcpdata, uint* ptcpdatalen)
-+{
-+    struct iphdr*   iph  = (struct iphdr*)skb->nh.iph;
-+    struct tcphdr*  tcph = (struct tcphdr*)((char*)iph + iph->ihl*4);
-+
-+    *pptcpdata = (char*)tcph + tcph->doff*4;
-+    *ptcpdatalen = ((char*)skb->h.raw + skb->len) - *pptcpdata;
-+}
-+
-+/*** nat functions ***/
-+
-+/*
-+ * Mangle the "Transport:" header:
-+ *   - Replace all occurences of "client_port=<spec>"
-+ *   - Handle destination parameter
-+ *
-+ * In:
-+ *   ct, ctinfo = conntrack context
-+ *   pskb       = packet
-+ *   tranoff    = Transport header offset from TCP data
-+ *   tranlen    = Transport header length (incl. CRLF)
-+ *   rport_lo   = replacement low  port (host endian)
-+ *   rport_hi   = replacement high port (host endian)
-+ *
-+ * Returns packet size difference.
-+ *
-+ * Assumes that a complete transport header is present, ending with CR or LF
-+ */
-+static int
-+rtsp_mangle_tran(struct ip_conntrack* ct, enum ip_conntrack_info ctinfo,
-+                 struct ip_conntrack_expect* exp,
-+                 struct sk_buff** pskb, uint tranoff, uint tranlen)
-+{
-+    char*       ptcp;
-+    uint        tcplen;
-+    char*       ptran;
-+    char        rbuf1[16];      /* Replacement buffer (one port) */
-+    uint        rbuf1len;       /* Replacement len (one port) */
-+    char        rbufa[16];      /* Replacement buffer (all ports) */
-+    uint        rbufalen;       /* Replacement len (all ports) */
-+    u_int32_t   newip;
-+    u_int16_t   loport, hiport;
-+    uint        off = 0;
-+    uint        diff;           /* Number of bytes we removed */
-+
-+    struct ip_ct_rtsp_expect* prtspexp = &exp->help.exp_rtsp_info;
-+    struct ip_conntrack_tuple t;
-+
-+    char    szextaddr[15+1];
-+    uint    extaddrlen;
-+    int     is_stun;
-+
-+    get_skb_tcpdata(*pskb, &ptcp, &tcplen);
-+    ptran = ptcp+tranoff;
-+
-+    if (tranoff+tranlen > tcplen || tcplen-tranoff < tranlen ||
-+        tranlen < 10 || !iseol(ptran[tranlen-1]) ||
-+        nf_strncasecmp(ptran, "Transport:", 10) != 0)
-+    {
-+        INFOP("sanity check failed\n");
-+        return 0;
-+    }
-+    off += 10;
-+    SKIP_WSPACE(ptcp+tranoff, tranlen, off);
-+
-+    newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-+    t = exp->tuple;
-+    t.dst.ip = newip;
-+
-+    extaddrlen = extip ? sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(extip))
-+                       : sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(newip));
-+    DEBUGP("stunaddr=%s (%s)\n", szextaddr, (extip?"forced":"auto"));
-+
-+    rbuf1len = rbufalen = 0;
-+    switch (prtspexp->pbtype)
-+    {
-+    case pb_single:
-+        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
-+        {
-+            t.dst.u.udp.port = htons(loport);
-+            if (ip_conntrack_change_expect(exp, &t) == 0)
-+            {
-+                DEBUGP("using port %hu\n", loport);
-+                break;
-+            }
-+        }
-+        if (loport != 0)
-+        {
-+            rbuf1len = sprintf(rbuf1, "%hu", loport);
-+            rbufalen = sprintf(rbufa, "%hu", loport);
-+        }
-+        break;
-+    case pb_range:
-+        for (loport = prtspexp->loport; loport != 0; loport += 2) /* XXX: improper wrap? */
-+        {
-+            t.dst.u.udp.port = htons(loport);
-+            if (ip_conntrack_change_expect(exp, &t) == 0)
-+            {
-+                hiport = loport + ~exp->mask.dst.u.udp.port;
-+                DEBUGP("using ports %hu-%hu\n", loport, hiport);
-+                break;
-+            }
-+        }
-+        if (loport != 0)
-+        {
-+            rbuf1len = sprintf(rbuf1, "%hu", loport);
-+            rbufalen = sprintf(rbufa, "%hu-%hu", loport, loport+1);
-+        }
-+        break;
-+    case pb_discon:
-+        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
-+        {
-+            t.dst.u.udp.port = htons(loport);
-+            if (ip_conntrack_change_expect(exp, &t) == 0)
-+            {
-+                DEBUGP("using port %hu (1 of 2)\n", loport);
-+                break;
-+            }
-+        }
-+        for (hiport = prtspexp->hiport; hiport != 0; hiport++) /* XXX: improper wrap? */
-+        {
-+            t.dst.u.udp.port = htons(hiport);
-+            if (ip_conntrack_change_expect(exp, &t) == 0)
-+            {
-+                DEBUGP("using port %hu (2 of 2)\n", hiport);
-+                break;
-+            }
-+        }
-+        if (loport != 0 && hiport != 0)
-+        {
-+            rbuf1len = sprintf(rbuf1, "%hu", loport);
-+            if (hiport == loport+1)
-+            {
-+                rbufalen = sprintf(rbufa, "%hu-%hu", loport, hiport);
-+            }
-+            else
-+            {
-+                rbufalen = sprintf(rbufa, "%hu/%hu", loport, hiport);
-+            }
-+        }
-+        break;
-+    }
-+
-+    if (rbuf1len == 0)
-+    {
-+        return 0;   /* cannot get replacement port(s) */
-+    }
-+
-+    /* Transport: tran;field;field=val,tran;field;field=val,... */
-+    while (off < tranlen)
-+    {
-+        uint        saveoff;
-+        const char* pparamend;
-+        uint        nextparamoff;
-+
-+        pparamend = memchr(ptran+off, ',', tranlen-off);
-+        pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
-+        nextparamoff = pparamend-ptcp;
-+
-+        /*
-+         * We pass over each param twice.  On the first pass, we look for a
-+         * destination= field.  It is handled by the security policy.  If it
-+         * is present, allowed, and equal to our external address, we assume
-+         * that STUN is being used and we leave the client_port= field alone.
-+         */
-+        is_stun = 0;
-+        saveoff = off;
-+        while (off < nextparamoff)
-+        {
-+            const char* pfieldend;
-+            uint        nextfieldoff;
-+
-+            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
-+            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
-+
-+            if (dstact != DSTACT_NONE && strncmp(ptran+off, "destination=", 12) == 0)
-+            {
-+                if (strncmp(ptran+off+12, szextaddr, extaddrlen) == 0)
-+                {
-+                    is_stun = 1;
-+                }
-+                if (dstact == DSTACT_STRIP || (dstact == DSTACT_AUTO && !is_stun))
-+                {
-+                    diff = nextfieldoff-off;
-+                    if (!ip_nat_mangle_tcp_packet(pskb, ct, ctinfo,
-+                                                         off, diff, NULL, 0))
-+                    {
-+                        /* mangle failed, all we can do is bail */
-+                        return 0;
-+                    }
-+                    get_skb_tcpdata(*pskb, &ptcp, &tcplen);
-+                    ptran = ptcp+tranoff;
-+                    tranlen -= diff;
-+                    nextparamoff -= diff;
-+                    nextfieldoff -= diff;
-+                }
-+            }
-+
-+            off = nextfieldoff;
-+        }
-+        if (is_stun)
-+        {
-+            continue;
-+        }
-+        off = saveoff;
-+        while (off < nextparamoff)
-+        {
-+            const char* pfieldend;
-+            uint        nextfieldoff;
-+
-+            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
-+            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
-+
-+            if (strncmp(ptran+off, "client_port=", 12) == 0)
-+            {
-+                u_int16_t   port;
-+                uint        numlen;
-+                uint        origoff;
-+                uint        origlen;
-+                char*       rbuf    = rbuf1;
-+                uint        rbuflen = rbuf1len;
-+
-+                off += 12;
-+                origoff = (ptran-ptcp)+off;
-+                origlen = 0;
-+                numlen = nf_strtou16(ptran+off, &port);
-+                off += numlen;
-+                origlen += numlen;
-+                if (port != prtspexp->loport)
-+                {
-+                    DEBUGP("multiple ports found, port %hu ignored\n", port);
-+                }
-+                else
-+                {
-+                    if (ptran[off] == '-' || ptran[off] == '/')
-+                    {
-+                        off++;
-+                        origlen++;
-+                        numlen = nf_strtou16(ptran+off, &port);
-+                        off += numlen;
-+                        origlen += numlen;
-+                        rbuf = rbufa;
-+                        rbuflen = rbufalen;
-+                    }
-+
-+                    /*
-+                     * note we cannot just memcpy() if the sizes are the same.
-+                     * the mangle function does skb resizing, checks for a
-+                     * cloned skb, and updates the checksums.
-+                     *
-+                     * parameter 4 below is offset from start of tcp data.
-+                     */
-+                    diff = origlen-rbuflen;
-+                    if (!ip_nat_mangle_tcp_packet(pskb, ct, ctinfo,
-+                                              origoff, origlen, rbuf, rbuflen))
-+                    {
-+                        /* mangle failed, all we can do is bail */
-+                        return 0;
-+                    }
-+                    get_skb_tcpdata(*pskb, &ptcp, &tcplen);
-+                    ptran = ptcp+tranoff;
-+                    tranlen -= diff;
-+                    nextparamoff -= diff;
-+                    nextfieldoff -= diff;
-+                }
-+            }
-+
-+            off = nextfieldoff;
-+        }
-+
-+        off = nextparamoff;
-+    }
-+
-+    return 1;
-+}
-+
-+static unsigned int
-+expected(struct sk_buff **pskb, uint hooknum, struct ip_conntrack* ct, struct ip_nat_info* info)
-+{
-+    struct ip_nat_multi_range mr;
-+    u_int32_t newdstip, newsrcip, newip;
-+
-+    struct ip_conntrack *master = master_ct(ct);
-+
-+    IP_NF_ASSERT(info);
-+    IP_NF_ASSERT(master);
-+
-+    IP_NF_ASSERT(!(info->initialized & (1 << HOOK2MANIP(hooknum))));
-+
-+    newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-+    newsrcip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-+    newip = (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC) ? newsrcip : newdstip;
-+
-+    DEBUGP("newsrcip=%u.%u.%u.%u, newdstip=%u.%u.%u.%u, newip=%u.%u.%u.%u\n",
-+           NIPQUAD(newsrcip), NIPQUAD(newdstip), NIPQUAD(newip));
-+
-+    mr.rangesize = 1;
-+    /* We don't want to manip the per-protocol, just the IPs. */
-+    mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
-+    mr.range[0].min_ip = mr.range[0].max_ip = newip;
-+
-+    return ip_nat_setup_info(ct, &mr, hooknum);
-+}
-+
-+static uint
-+help_out(struct ip_conntrack* ct, enum ip_conntrack_info ctinfo,
-+         struct ip_conntrack_expect* exp, struct sk_buff** pskb)
-+{
-+    char*   ptcp;
-+    uint    tcplen;
-+    uint    hdrsoff;
-+    uint    hdrslen;
-+    uint    lineoff;
-+    uint    linelen;
-+    uint    off;
-+
-+    struct iphdr* iph = (struct iphdr*)(*pskb)->nh.iph;
-+    struct tcphdr* tcph = (struct tcphdr*)((void*)iph + iph->ihl*4);
-+
-+    struct ip_ct_rtsp_expect* prtspexp = &exp->help.exp_rtsp_info;
-+
-+    get_skb_tcpdata(*pskb, &ptcp, &tcplen);
-+
-+    hdrsoff = exp->seq - ntohl(tcph->seq);
-+    hdrslen = prtspexp->len;
-+    off = hdrsoff;
-+
-+    while (nf_mime_nextline(ptcp, hdrsoff+hdrslen, &off, &lineoff, &linelen))
-+    {
-+        if (linelen == 0)
-+        {
-+            break;
-+        }
-+        if (off > hdrsoff+hdrslen)
-+        {
-+            INFOP("!! overrun !!");
-+            break;
-+        }
-+        DEBUGP("hdr: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
-+
-+        if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0)
-+        {
-+            uint oldtcplen = tcplen;
-+            if (!rtsp_mangle_tran(ct, ctinfo, exp, pskb, lineoff, linelen))
-+            {
-+                break;
-+            }
-+            get_skb_tcpdata(*pskb, &ptcp, &tcplen);
-+            hdrslen -= (oldtcplen-tcplen);
-+            off -= (oldtcplen-tcplen);
-+            lineoff -= (oldtcplen-tcplen);
-+            linelen -= (oldtcplen-tcplen);
-+            DEBUGP("rep: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
-+        }
-+    }
-+
-+    return NF_ACCEPT;
-+}
-+
-+static uint
-+help_in(struct ip_conntrack* ct, enum ip_conntrack_info ctinfo,
-+         struct ip_conntrack_expect* exp, struct sk_buff** pskb)
-+{
-+    /* XXX: unmangle */
-+    return NF_ACCEPT;
-+}
-+
-+static uint
-+help(struct ip_conntrack* ct,
-+     struct ip_conntrack_expect* exp,
-+     struct ip_nat_info* info,
-+     enum ip_conntrack_info ctinfo,
-+     unsigned int hooknum,
-+     struct sk_buff** pskb)
-+{
-+    struct iphdr*  iph  = (struct iphdr*)(*pskb)->nh.iph;
-+    struct tcphdr* tcph = (struct tcphdr*)((char*)iph + iph->ihl * 4);
-+    uint datalen;
-+    int dir;
-+    struct ip_ct_rtsp_expect* ct_rtsp_info;
-+    int rc = NF_ACCEPT;
-+
-+    if (ct == NULL || exp == NULL || info == NULL || pskb == NULL)
-+    {
-+        DEBUGP("!! null ptr (%p,%p,%p,%p) !!\n", ct, exp, info, pskb);
-+        return NF_ACCEPT;
-+    }
-+
-+    ct_rtsp_info = &exp->help.exp_rtsp_info;
-+
-+    /*
-+     * Only mangle things once: original direction in POST_ROUTING
-+     * and reply direction on PRE_ROUTING.
-+     */
-+    dir = CTINFO2DIR(ctinfo);
-+    if (!((hooknum == NF_IP_POST_ROUTING && dir == IP_CT_DIR_ORIGINAL)
-+          || (hooknum == NF_IP_PRE_ROUTING && dir == IP_CT_DIR_REPLY)))
-+    {
-+        DEBUGP("Not touching dir %s at hook %s\n",
-+               dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY",
-+               hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-+               : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-+               : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT" : "???");
-+        return NF_ACCEPT;
-+    }
-+    DEBUGP("got beyond not touching\n");
-+
-+    datalen = (*pskb)->len - iph->ihl * 4 - tcph->doff * 4;
-+
-+    LOCK_BH(&ip_rtsp_lock);
-+    /* Ensure the packet contains all of the marked data */
-+    if (!between(exp->seq + ct_rtsp_info->len,
-+                 ntohl(tcph->seq), ntohl(tcph->seq) + datalen))
-+    {
-+        /* Partial retransmission?  Probably a hacker. */
-+        if (net_ratelimit())
-+        {
-+            INFOP("partial packet %u/%u in %u/%u\n",
-+                   exp->seq, ct_rtsp_info->len, ntohl(tcph->seq), ntohl(tcph->seq) + datalen);
-+        }
-+        UNLOCK_BH(&ip_rtsp_lock);
-+        return NF_DROP;
-+    }
-+
-+    switch (dir)
-+    {
-+    case IP_CT_DIR_ORIGINAL:
-+        rc = help_out(ct, ctinfo, exp, pskb);
-+        break;
-+    case IP_CT_DIR_REPLY:
-+        rc = help_in(ct, ctinfo, exp, pskb);
-+        break;
-+    }
-+    UNLOCK_BH(&ip_rtsp_lock);
-+
-+    return rc;
-+}
-+
-+static struct ip_nat_helper ip_nat_rtsp_helpers[MAX_PORTS];
-+static char rtsp_names[MAX_PORTS][10];
-+
-+/* This function is intentionally _NOT_ defined as  __exit */
-+static void
-+fini(void)
-+{
-+    int i;
-+
-+    for (i = 0; i < num_ports; i++)
-+    {
-+        DEBUGP("unregistering helper for port %d\n", ports[i]);
-+        ip_nat_helper_unregister(&ip_nat_rtsp_helpers[i]);
-+    }
-+}
-+
-+static int __init
-+init(void)
-+{
-+    int ret = 0;
-+    int i;
-+    struct ip_nat_helper* hlpr;
-+    char* tmpname;
-+
-+    printk("ip_nat_rtsp v" IP_NF_RTSP_VERSION " loading\n");
-+
-+    if (ports[0] == 0)
-+    {
-+        ports[0] = RTSP_PORT;
-+    }
-+
-+    for (i = 0; (i < MAX_PORTS) && ports[i] != 0; i++)
-+    {
-+        hlpr = &ip_nat_rtsp_helpers[i];
-+        memset(hlpr, 0, sizeof(struct ip_nat_helper));
-+
-+        hlpr->tuple.dst.protonum = IPPROTO_TCP;
-+        hlpr->tuple.src.u.tcp.port = htons(ports[i]);
-+        hlpr->mask.src.u.tcp.port = 0xFFFF;
-+        hlpr->mask.dst.protonum = 0xFFFF;
-+        hlpr->help = help;
-+        hlpr->flags = 0;
-+        hlpr->me = THIS_MODULE;
-+        hlpr->expect = expected;
-+
-+        tmpname = &rtsp_names[i][0];
-+        if (ports[i] == RTSP_PORT)
-+        {
-+                sprintf(tmpname, "rtsp");
-+        }
-+        else
-+        {
-+                sprintf(tmpname, "rtsp-%d", i);
-+        }
-+        hlpr->name = tmpname;
-+
-+        DEBUGP("registering helper for port %d: name %s\n", ports[i], hlpr->name);
-+        ret = ip_nat_helper_register(hlpr);
-+
-+        if (ret)
-+        {
-+            printk("ip_nat_rtsp: error registering helper for port %d\n", ports[i]);
-+            fini();
-+            return 1;
-+        }
-+        num_ports++;
-+    }
-+    if (stunaddr != NULL)
-+    {
-+        extip = in_aton(stunaddr);
-+    }
-+    if (destaction != NULL)
-+    {
-+        if (strcmp(destaction, "auto") == 0)
-+        {
-+            dstact = DSTACT_AUTO;
-+        }
-+        if (strcmp(destaction, "strip") == 0)
-+        {
-+            dstact = DSTACT_STRIP;
-+        }
-+        if (strcmp(destaction, "none") == 0)
-+        {
-+            dstact = DSTACT_NONE;
-+        }
-+    }
-+    return ret;
-+}
-+
-+module_init(init);
-+module_exit(fini);
---- linux-2.4.32/arch/mips/kernel/mips_ksyms.c	2006-03-01 00:49:34.142887320 +0100
-+++ linux-2.4.32.new/arch/mips/kernel/mips_ksyms.c	2006-03-01 00:55:14.469149864 +0100
-@@ -52,6 +52,7 @@
- /*
-  * String functions
-  */
-+EXPORT_SYMBOL_NOVERS(memchr);
- EXPORT_SYMBOL_NOVERS(memcmp);
- EXPORT_SYMBOL_NOVERS(memset);
- EXPORT_SYMBOL_NOVERS(memcpy);
-diff -urN linux-2.4.32/include/linux/netfilter_helpers.h linux-2.4.32.new/include/linux/netfilter_helpers.h
---- linux-2.4.32/include/linux/netfilter_helpers.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.new/include/linux/netfilter_helpers.h	2006-03-01 00:55:14.470149712 +0100
-@@ -0,0 +1,133 @@
-+/*
-+ * Helpers for netfiler modules.  This file provides implementations for basic
-+ * functions such as strncasecmp(), etc.
-+ *
-+ * gcc will warn for defined but unused functions, so we only include the
-+ * functions requested.  The following macros are used:
-+ *   NF_NEED_STRNCASECMP        nf_strncasecmp()
-+ *   NF_NEED_STRTOU16           nf_strtou16()
-+ *   NF_NEED_STRTOU32           nf_strtou32()
-+ */
-+#ifndef _NETFILTER_HELPERS_H
-+#define _NETFILTER_HELPERS_H
-+
-+/* Only include these functions for kernel code. */
-+#ifdef __KERNEL__
-+
-+#include <linux/ctype.h>
-+#define iseol(c) ( (c) == '\r' || (c) == '\n' )
-+
-+/*
-+ * The standard strncasecmp()
-+ */
-+#ifdef NF_NEED_STRNCASECMP
-+static int
-+nf_strncasecmp(const char* s1, const char* s2, u_int32_t len)
-+{
-+    if (s1 == NULL || s2 == NULL)
-+    {
-+        if (s1 == NULL && s2 == NULL)
-+        {
-+            return 0;
-+        }
-+        return (s1 == NULL) ? -1 : 1;
-+    }
-+    while (len > 0 && tolower(*s1) == tolower(*s2))
-+    {
-+        len--;
-+        s1++;
-+        s2++;
-+    }
-+    return ( (len == 0) ? 0 : (tolower(*s1) - tolower(*s2)) );
-+}
-+#endif /* NF_NEED_STRNCASECMP */
-+
-+/*
-+ * Parse a string containing a 16-bit unsigned integer.
-+ * Returns the number of chars used, or zero if no number is found.
-+ */
-+#ifdef NF_NEED_STRTOU16
-+static int
-+nf_strtou16(const char* pbuf, u_int16_t* pval)
-+{
-+    int n = 0;
-+
-+    *pval = 0;
-+    while (isdigit(pbuf[n]))
-+    {
-+        *pval = (*pval * 10) + (pbuf[n] - '0');
-+        n++;
-+    }
-+
-+    return n;
-+}
-+#endif /* NF_NEED_STRTOU16 */
-+
-+/*
-+ * Parse a string containing a 32-bit unsigned integer.
-+ * Returns the number of chars used, or zero if no number is found.
-+ */
-+#ifdef NF_NEED_STRTOU32
-+static int
-+nf_strtou32(const char* pbuf, u_int32_t* pval)
-+{
-+    int n = 0;
-+
-+    *pval = 0;
-+    while (pbuf[n] >= '0' && pbuf[n] <= '9')
-+    {
-+        *pval = (*pval * 10) + (pbuf[n] - '0');
-+        n++;
-+    }
-+
-+    return n;
-+}
-+#endif /* NF_NEED_STRTOU32 */
-+
-+/*
-+ * Given a buffer and length, advance to the next line and mark the current
-+ * line.
-+ */
-+#ifdef NF_NEED_NEXTLINE
-+static int
-+nf_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
-+{
-+    uint    off = *poff;
-+    uint    physlen = 0;
-+
-+    if (off >= len)
-+    {
-+        return 0;
-+    }
-+
-+    while (p[off] != '\n')
-+    {
-+        if (len-off <= 1)
-+        {
-+            return 0;
-+        }
-+
-+        physlen++;
-+        off++;
-+    }
-+
-+    /* if we saw a crlf, physlen needs adjusted */
-+    if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
-+    {
-+        physlen--;
-+    }
-+
-+    /* advance past the newline */
-+    off++;
-+
-+    *plineoff = *poff;
-+    *plinelen = physlen;
-+    *poff = off;
-+
-+    return 1;
-+}
-+#endif /* NF_NEED_NEXTLINE */
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _NETFILTER_HELPERS_H */
-diff -urN linux-2.4.32/include/linux/netfilter_ipv4/ip_conntrack_rtsp.h linux-2.4.32.new/include/linux/netfilter_ipv4/ip_conntrack_rtsp.h
---- linux-2.4.32/include/linux/netfilter_ipv4/ip_conntrack_rtsp.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.new/include/linux/netfilter_ipv4/ip_conntrack_rtsp.h	2006-03-01 00:55:14.472149408 +0100
-@@ -0,0 +1,68 @@
-+/*
-+ * RTSP extension for IP connection tracking.
-+ * (C) 2003 by Tom Marshall <tmarshall@real.com>
-+ * based on ip_conntrack_irc.h
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ */
-+#ifndef _IP_CONNTRACK_RTSP_H
-+#define _IP_CONNTRACK_RTSP_H
-+
-+/* #define IP_NF_RTSP_DEBUG */
-+#define IP_NF_RTSP_VERSION "0.01"
-+
-+/* port block types */
-+typedef enum {
-+    pb_single,  /* client_port=x */
-+    pb_range,   /* client_port=x-y */
-+    pb_discon   /* client_port=x/y (rtspbis) */
-+} portblock_t;
-+
-+/* We record seq number and length of rtsp headers here, all in host order. */
-+
-+/*
-+ * This structure is per expected connection.  It is a member of struct
-+ * ip_conntrack_expect.  The TCP SEQ for the conntrack expect is stored
-+ * there and we are expected to only store the length of the data which
-+ * needs replaced.  If a packet contains multiple RTSP messages, we create
-+ * one expected connection per message.
-+ *
-+ * We use these variables to mark the entire header block.  This may seem
-+ * like overkill, but the nature of RTSP requires it.  A header may appear
-+ * multiple times in a message.  We must treat two Transport headers the
-+ * same as one Transport header with two entries.
-+ */
-+struct ip_ct_rtsp_expect
-+{
-+    u_int32_t   len;        /* length of header block */
-+    portblock_t pbtype;     /* Type of port block that was requested */
-+    u_int16_t   loport;     /* Port that was requested, low or first */
-+    u_int16_t   hiport;     /* Port that was requested, high or second */
-+#if 0
-+    uint        method;     /* RTSP method */
-+    uint        cseq;       /* CSeq from request */
-+#endif
-+};
-+
-+/* This structure exists only once per master */
-+struct ip_ct_rtsp_master
-+{
-+    /* Empty (?) */
-+};
-+
-+
-+#ifdef __KERNEL__
-+
-+#include <linux/netfilter_ipv4/lockhelp.h>
-+
-+#define RTSP_PORT   554
-+
-+/* Protects rtsp part of conntracks */
-+DECLARE_LOCK_EXTERN(ip_rtsp_lock);
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _IP_CONNTRACK_RTSP_H */
-diff -urN linux-2.4.32/include/linux/netfilter_mime.h linux-2.4.32.new/include/linux/netfilter_mime.h
---- linux-2.4.32/include/linux/netfilter_mime.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.new/include/linux/netfilter_mime.h	2006-03-01 00:55:14.473149256 +0100
-@@ -0,0 +1,90 @@
-+/*
-+ * MIME functions for netfilter modules.  This file provides implementations
-+ * for basic MIME parsing.  MIME headers are used in many protocols, such as
-+ * HTTP, RTSP, SIP, etc.
-+ *
-+ * gcc will warn for defined but unused functions, so we only include the
-+ * functions requested.  The following macros are used:
-+ *   NF_NEED_MIME_NEXTLINE      nf_mime_nextline()
-+ */
-+#ifndef _NETFILTER_MIME_H
-+#define _NETFILTER_MIME_H
-+
-+/* Only include these functions for kernel code. */
-+#ifdef __KERNEL__
-+
-+#include <linux/kernel.h>
-+#include <linux/ctype.h>
-+
-+/*
-+ * Given a buffer and length, advance to the next line and mark the current
-+ * line.  If the current line is empty, *plinelen will be set to zero.  If
-+ * not, it will be set to the actual line length (including CRLF).
-+ *
-+ * 'line' in this context means logical line (includes LWS continuations).
-+ * Returns 1 on success, 0 on failure.
-+ */
-+#ifdef NF_NEED_MIME_NEXTLINE
-+static int
-+nf_mime_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
-+{
-+    uint    off = *poff;
-+    uint    physlen = 0;
-+    int     is_first_line = 1;
-+
-+    if (off >= len)
-+    {
-+        return 0;
-+    }
-+
-+    do
-+    {
-+        while (p[off] != '\n')
-+        {
-+            if (len-off <= 1)
-+            {
-+                return 0;
-+            }
-+
-+            physlen++;
-+            off++;
-+        }
-+
-+        /* if we saw a crlf, physlen needs adjusted */
-+        if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
-+        {
-+            physlen--;
-+        }
-+
-+        /* advance past the newline */
-+        off++;
-+
-+        /* check for an empty line */
-+        if (physlen == 0)
-+        {
-+            break;
-+        }
-+
-+        /* check for colon on the first physical line */
-+        if (is_first_line)
-+        {
-+            is_first_line = 0;
-+            if (memchr(p+(*poff), ':', physlen) == NULL)
-+            {
-+                return 0;
-+            }
-+        }
-+    }
-+    while (p[off] == ' ' || p[off] == '\t');
-+
-+    *plineoff = *poff;
-+    *plinelen = (physlen == 0) ? 0 : (off - *poff);
-+    *poff = off;
-+
-+    return 1;
-+}
-+#endif /* NF_NEED_MIME_NEXTLINE */
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _NETFILTER_MIME_H */
---- linux-2.4.32/include/linux/netfilter_ipv4/ip_conntrack.h	2006-03-01 00:53:57.889791696 +0100
-+++ linux-2.4.32.new/include/linux/netfilter_ipv4/ip_conntrack.h	2006-03-01 01:06:32.178122440 +0100
-@@ -72,6 +72,7 @@
- #include <linux/netfilter_ipv4/ip_conntrack_irc.h>
- #include <linux/netfilter_ipv4/ip_conntrack_pptp.h>
- #include <linux/netfilter_ipv4/ip_conntrack_h323.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_rtsp.h>
- 
- /* per expectation: application helper private data */
- union ip_conntrack_expect_help {
-@@ -81,6 +82,7 @@
- 	struct ip_ct_irc_expect exp_irc_info;
- 	struct ip_ct_pptp_expect exp_pptp_info;
- 	struct ip_ct_h225_expect exp_h225_info;
-+	struct ip_ct_rtsp_expect exp_rtsp_info;
- 
- #ifdef CONFIG_IP_NF_NAT_NEEDED
- 	union {
-@@ -96,6 +98,7 @@
- 	struct ip_ct_irc_master ct_irc_info;
- 	struct ip_ct_pptp_master ct_pptp_info;
- 	struct ip_ct_h225_master ct_h225_info;
-+	struct ip_ct_rtsp_master ct_rtsp_info;
- };
- 
- #ifdef CONFIG_IP_NF_NAT_NEEDED
diff --git a/openwrt/target/linux/generic-2.4/patches/615-netfilter_nat_mms.patch b/openwrt/target/linux/generic-2.4/patches/615-netfilter_nat_mms.patch
deleted file mode 100644
index 3871d59395..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/615-netfilter_nat_mms.patch
+++ /dev/null
@@ -1,739 +0,0 @@
-diff -urN linux-2.4.32/net/ipv4/netfilter/Config.in linux-2.4.32.new/net/ipv4/netfilter/Config.in
---- linux-2.4.32/net/ipv4/netfilter/Config.in	2006-03-01 01:12:48.268947944 +0100
-+++ linux-2.4.32.new/net/ipv4/netfilter/Config.in	2006-03-01 01:14:53.455916632 +0100
-@@ -17,6 +17,7 @@
-   dep_tristate '   PPTP protocol support' CONFIG_IP_NF_PPTP $CONFIG_IP_NF_CT_PROTO_GRE
-   dep_tristate '  H.323 (netmeeting) support' CONFIG_IP_NF_H323 $CONFIG_IP_NF_CONNTRACK
-   dep_tristate '  RTSP protocol support' CONFIG_IP_NF_RTSP $CONFIG_IP_NF_CONNTRACK
-+  dep_tristate '  MMS protocol support' CONFIG_IP_NF_MMS $CONFIG_IP_NF_CONNTRACK
- fi
- 
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-@@ -127,6 +128,13 @@
-          define_tristate CONFIG_IP_NF_NAT_RTSP $CONFIG_IP_NF_NAT
-        fi
-       fi
-+      if [ "$CONFIG_IP_NF_MMS" = "m" ]; then
-+       define_tristate CONFIG_IP_NF_NAT_MMS m
-+      else
-+       if [ "$CONFIG_IP_NF_MMS" = "y" ]; then
-+         define_tristate CONFIG_IP_NF_NAT_MMS $CONFIG_IP_NF_NAT
-+       fi
-+      fi
-       if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-         dep_tristate '    Basic SNMP-ALG support (EXPERIMENTAL)' CONFIG_IP_NF_NAT_SNMP_BASIC $CONFIG_IP_NF_NAT
-       fi
-diff -urN linux-2.4.32/net/ipv4/netfilter/Makefile linux-2.4.32.new/net/ipv4/netfilter/Makefile
---- linux-2.4.32/net/ipv4/netfilter/Makefile	2006-03-01 01:12:48.270947640 +0100
-+++ linux-2.4.32.new/net/ipv4/netfilter/Makefile	2006-03-01 01:15:25.263081208 +0100
-@@ -61,6 +61,10 @@
- ifdef CONFIG_IP_NF_NAT_RTSP
-        export-objs += ip_conntrack_rtsp.o
- endif
-+obj-$(CONFIG_IP_NF_MMS) += ip_conntrack_mms.o
-+ifdef CONFIG_IP_NF_NAT_MMS
-+       export-objs += ip_conntrack_mms.o
-+endif
- 
- 
- 
-@@ -73,6 +77,7 @@
- obj-$(CONFIG_IP_NF_NAT_PPTP) += ip_nat_pptp.o
- obj-$(CONFIG_IP_NF_NAT_H323) += ip_nat_h323.o
- obj-$(CONFIG_IP_NF_NAT_RTSP) += ip_nat_rtsp.o
-+obj-$(CONFIG_IP_NF_NAT_MMS) += ip_nat_mms.o
- 
- # generic IP tables 
- obj-$(CONFIG_IP_NF_IPTABLES) += ip_tables.o
-diff -urN linux-2.4.32/net/ipv4/netfilter/ip_conntrack_mms.c linux-2.4.32.new/net/ipv4/netfilter/ip_conntrack_mms.c
---- linux-2.4.32/net/ipv4/netfilter/ip_conntrack_mms.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.new/net/ipv4/netfilter/ip_conntrack_mms.c	2006-03-01 01:13:32.991149136 +0100
-@@ -0,0 +1,292 @@
-+/* MMS extension for IP connection tracking
-+ * (C) 2002 by Filip Sneppe <filip.sneppe@cronos.be>
-+ * based on ip_conntrack_ftp.c and ip_conntrack_irc.c
-+ *
-+ * ip_conntrack_mms.c v0.3 2002-09-22
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ *      Module load syntax:
-+ *      insmod ip_conntrack_mms.o ports=port1,port2,...port<MAX_PORTS>
-+ *
-+ *      Please give the ports of all MMS servers You wish to connect to.
-+ *      If you don't specify ports, the default will be TCP port 1755.
-+ *
-+ *      More info on MMS protocol, firewalls and NAT:
-+ *      http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnwmt/html/MMSFirewall.asp
-+ *      http://www.microsoft.com/windows/windowsmedia/serve/firewall.asp
-+ *
-+ *      The SDP project people are reverse-engineering MMS:
-+ *      http://get.to/sdp
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/netfilter.h>
-+#include <linux/ip.h>
-+#include <linux/ctype.h>
-+#include <net/checksum.h>
-+#include <net/tcp.h>
-+
-+#include <linux/netfilter_ipv4/lockhelp.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_mms.h>
-+
-+DECLARE_LOCK(ip_mms_lock);
-+struct module *ip_conntrack_mms = THIS_MODULE;
-+
-+#define MAX_PORTS 8
-+static int ports[MAX_PORTS];
-+static int ports_c;
-+#ifdef MODULE_PARM
-+MODULE_PARM(ports, "1-" __MODULE_STRING(MAX_PORTS) "i");
-+#endif
-+
-+#define DEBUGP(format, args...)
-+
-+#ifdef CONFIG_IP_NF_NAT_NEEDED
-+EXPORT_SYMBOL(ip_mms_lock);
-+#endif
-+
-+MODULE_AUTHOR("Filip Sneppe <filip.sneppe@cronos.be>");
-+MODULE_DESCRIPTION("Microsoft Windows Media Services (MMS) connection tracking module");
-+MODULE_LICENSE("GPL");
-+
-+/* #define isdigit(c) (c >= '0' && c <= '9') */
-+
-+/* copied from drivers/usb/serial/io_edgeport.c - not perfect but will do the trick */
-+static void unicode_to_ascii (char *string, short *unicode, int unicode_size)
-+{
-+	int i;
-+	for (i = 0; i < unicode_size; ++i) {
-+		string[i] = (char)(unicode[i]);
-+	}
-+	string[unicode_size] = 0x00;
-+}
-+
-+__inline static int atoi(char *s) 
-+{
-+	int i=0;
-+	while (isdigit(*s)) {
-+		i = i*10 + *(s++) - '0';
-+	}
-+	return i;
-+}
-+
-+/* convert ip address string like "192.168.0.10" to unsigned int */
-+__inline static u_int32_t asciiiptoi(char *s)
-+{
-+	unsigned int i, j, k;
-+
-+	for(i=k=0; k<3; ++k, ++s, i<<=8) {
-+		i+=atoi(s);
-+		for(j=0; (*(++s) != '.') && (j<3); ++j)
-+			;
-+	}
-+	i+=atoi(s);
-+	return ntohl(i);
-+}
-+
-+int parse_mms(const char *data, 
-+	      const unsigned int datalen,
-+	      u_int32_t *mms_ip,
-+	      u_int16_t *mms_proto,
-+	      u_int16_t *mms_port,
-+	      char **mms_string_b,
-+	      char **mms_string_e,
-+	      char **mms_padding_e)
-+{
-+	int unicode_size, i;
-+	char tempstring[28];       /* "\\255.255.255.255\UDP\65535" */
-+	char getlengthstring[28];
-+	
-+	for(unicode_size=0; 
-+	    (char) *(data+(MMS_SRV_UNICODE_STRING_OFFSET+unicode_size*2)) != (char)0;
-+	    unicode_size++)
-+		if ((unicode_size == 28) || (MMS_SRV_UNICODE_STRING_OFFSET+unicode_size*2 >= datalen)) 
-+			return -1; /* out of bounds - incomplete packet */
-+	
-+	unicode_to_ascii(tempstring, (short *)(data+MMS_SRV_UNICODE_STRING_OFFSET), unicode_size);
-+	DEBUGP("ip_conntrack_mms: offset 60: %s\n", (const char *)(tempstring));
-+	
-+	/* IP address ? */
-+	*mms_ip = asciiiptoi(tempstring+2);
-+	
-+	i=sprintf(getlengthstring, "%u.%u.%u.%u", HIPQUAD(*mms_ip));
-+		
-+	/* protocol ? */
-+	if(strncmp(tempstring+3+i, "TCP", 3)==0)
-+		*mms_proto = IPPROTO_TCP;
-+	else if(strncmp(tempstring+3+i, "UDP", 3)==0)
-+		*mms_proto = IPPROTO_UDP;
-+
-+	/* port ? */
-+	*mms_port = atoi(tempstring+7+i);
-+
-+	/* we store a pointer to the beginning of the "\\a.b.c.d\proto\port" 
-+	   unicode string, one to the end of the string, and one to the end 
-+	   of the packet, since we must keep track of the number of bytes 
-+	   between end of the unicode string and the end of packet (padding) */
-+	*mms_string_b  = (char *)(data + MMS_SRV_UNICODE_STRING_OFFSET);
-+	*mms_string_e  = (char *)(data + MMS_SRV_UNICODE_STRING_OFFSET + unicode_size * 2);
-+	*mms_padding_e = (char *)(data + datalen); /* looks funny, doesn't it */
-+	return 0;
-+}
-+
-+
-+static int help(const struct iphdr *iph, size_t len,
-+		struct ip_conntrack *ct,
-+		enum ip_conntrack_info ctinfo)
-+{
-+	/* tcplen not negative guaranteed by ip_conntrack_tcp.c */
-+	struct tcphdr *tcph = (void *)iph + iph->ihl * 4;
-+	const char *data = (const char *)tcph + tcph->doff * 4;
-+	unsigned int tcplen = len - iph->ihl * 4;
-+	unsigned int datalen = tcplen - tcph->doff * 4;
-+	int dir = CTINFO2DIR(ctinfo);
-+	struct ip_conntrack_expect expect, *exp = &expect; 
-+	struct ip_ct_mms_expect *exp_mms_info = &exp->help.exp_mms_info;
-+	
-+	u_int32_t mms_ip;
-+	u_int16_t mms_proto;
-+	char mms_proto_string[8];
-+	u_int16_t mms_port;
-+	char *mms_string_b, *mms_string_e, *mms_padding_e;
-+	     
-+	/* Until there's been traffic both ways, don't look in packets. */
-+	if (ctinfo != IP_CT_ESTABLISHED
-+	    && ctinfo != IP_CT_ESTABLISHED+IP_CT_IS_REPLY) {
-+		DEBUGP("ip_conntrack_mms: Conntrackinfo = %u\n", ctinfo);
-+		return NF_ACCEPT;
-+	}
-+
-+	/* Not whole TCP header? */
-+	if (tcplen < sizeof(struct tcphdr) || tcplen < tcph->doff*4) {
-+		DEBUGP("ip_conntrack_mms: tcplen = %u\n", (unsigned)tcplen);
-+		return NF_ACCEPT;
-+	}
-+
-+	/* Checksum invalid?  Ignore. */
-+	if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
-+	    csum_partial((char *)tcph, tcplen, 0))) {
-+		DEBUGP("mms_help: bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
-+		       tcph, tcplen, NIPQUAD(iph->saddr),
-+		       NIPQUAD(iph->daddr));
-+		return NF_ACCEPT;
-+	}
-+	
-+	/* Only look at packets with 0x00030002/196610 on bytes 36->39 of TCP payload */
-+	if( (MMS_SRV_MSG_OFFSET < datalen) && 
-+	    ((*(u32 *)(data+MMS_SRV_MSG_OFFSET)) == MMS_SRV_MSG_ID)) {
-+		DEBUGP("ip_conntrack_mms: offset 37: %u %u %u %u, datalen:%u\n", 
-+		       (u8)*(data+36), (u8)*(data+37), 
-+		       (u8)*(data+38), (u8)*(data+39),
-+		       datalen);
-+		if(parse_mms(data, datalen, &mms_ip, &mms_proto, &mms_port,
-+		             &mms_string_b, &mms_string_e, &mms_padding_e))
-+			if(net_ratelimit())
-+				printk(KERN_WARNING
-+				       "ip_conntrack_mms: Unable to parse data payload\n");
-+
-+		memset(&expect, 0, sizeof(expect));
-+
-+		sprintf(mms_proto_string, "(%u)", mms_proto);
-+		DEBUGP("ip_conntrack_mms: adding %s expectation %u.%u.%u.%u -> %u.%u.%u.%u:%u\n",
-+		       mms_proto == IPPROTO_TCP ? "TCP"
-+		       : mms_proto == IPPROTO_UDP ? "UDP":mms_proto_string,
-+		       NIPQUAD(ct->tuplehash[!dir].tuple.src.ip),
-+		       NIPQUAD(mms_ip),
-+		       mms_port);
-+		
-+		/* it's possible that the client will just ask the server to tunnel
-+		   the stream over the same TCP session (from port 1755): there's 
-+		   shouldn't be a need to add an expectation in that case, but it
-+		   makes NAT packet mangling so much easier */
-+		LOCK_BH(&ip_mms_lock);
-+
-+		DEBUGP("ip_conntrack_mms: tcph->seq = %u\n", tcph->seq);
-+		
-+		exp->seq = ntohl(tcph->seq) + (mms_string_b - data);
-+		exp_mms_info->len     = (mms_string_e  - mms_string_b);
-+		exp_mms_info->padding = (mms_padding_e - mms_string_e);
-+		exp_mms_info->port    = mms_port;
-+		
-+		DEBUGP("ip_conntrack_mms: wrote info seq=%u (ofs=%u), len=%d, padding=%u\n",
-+		       exp->seq, (mms_string_e - data), exp_mms_info->len, exp_mms_info->padding);
-+		
-+		exp->tuple = ((struct ip_conntrack_tuple)
-+		              { { ct->tuplehash[!dir].tuple.src.ip, { 0 } },
-+		              { mms_ip,
-+		                { (__u16) ntohs(mms_port) },
-+		                mms_proto } }
-+		             );
-+		exp->mask  = ((struct ip_conntrack_tuple)
-+		             { { 0xFFFFFFFF, { 0 } },
-+		               { 0xFFFFFFFF, { 0xFFFF }, 0xFFFF }});
-+		exp->expectfn = NULL;
-+		ip_conntrack_expect_related(ct, &expect);
-+		UNLOCK_BH(&ip_mms_lock);
-+	}
-+
-+	return NF_ACCEPT;
-+}
-+
-+static struct ip_conntrack_helper mms[MAX_PORTS];
-+static char mms_names[MAX_PORTS][10];
-+
-+/* Not __exit: called from init() */
-+static void fini(void)
-+{
-+	int i;
-+	for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
-+		DEBUGP("ip_conntrack_mms: unregistering helper for port %d\n",
-+				ports[i]);
-+		ip_conntrack_helper_unregister(&mms[i]);
-+	}
-+}
-+
-+static int __init init(void)
-+{
-+	int i, ret;
-+	char *tmpname;
-+
-+	if (ports[0] == 0)
-+		ports[0] = MMS_PORT;
-+
-+	for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
-+		memset(&mms[i], 0, sizeof(struct ip_conntrack_helper));
-+		mms[i].tuple.src.u.tcp.port = htons(ports[i]);
-+		mms[i].tuple.dst.protonum = IPPROTO_TCP;
-+		mms[i].mask.src.u.tcp.port = 0xFFFF;
-+		mms[i].mask.dst.protonum = 0xFFFF;
-+		mms[i].max_expected = 1;
-+		mms[i].timeout = 0;
-+		mms[i].flags = IP_CT_HELPER_F_REUSE_EXPECT;
-+		mms[i].me = THIS_MODULE;
-+		mms[i].help = help;
-+
-+		tmpname = &mms_names[i][0];
-+		if (ports[i] == MMS_PORT)
-+			sprintf(tmpname, "mms");
-+		else
-+			sprintf(tmpname, "mms-%d", ports[i]);
-+		mms[i].name = tmpname;
-+
-+		DEBUGP("ip_conntrack_mms: registering helper for port %d\n", 
-+				ports[i]);
-+		ret = ip_conntrack_helper_register(&mms[i]);
-+
-+		if (ret) {
-+			fini();
-+			return ret;
-+		}
-+		ports_c++;
-+	}
-+	return 0;
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux-2.4.32/net/ipv4/netfilter/ip_nat_mms.c linux-2.4.32.new/net/ipv4/netfilter/ip_nat_mms.c
---- linux-2.4.32/net/ipv4/netfilter/ip_nat_mms.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.new/net/ipv4/netfilter/ip_nat_mms.c	2006-03-01 01:13:32.992148984 +0100
-@@ -0,0 +1,330 @@
-+/* MMS extension for TCP NAT alteration.
-+ * (C) 2002 by Filip Sneppe <filip.sneppe@cronos.be>
-+ * based on ip_nat_ftp.c and ip_nat_irc.c
-+ *
-+ * ip_nat_mms.c v0.3 2002-09-22
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ *      Module load syntax:
-+ *      insmod ip_nat_mms.o ports=port1,port2,...port<MAX_PORTS>
-+ *
-+ *      Please give the ports of all MMS servers You wish to connect to.
-+ *      If you don't specify ports, the default will be TCP port 1755.
-+ *
-+ *      More info on MMS protocol, firewalls and NAT:
-+ *      http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnwmt/html/MMSFirewall.asp
-+ *      http://www.microsoft.com/windows/windowsmedia/serve/firewall.asp
-+ *
-+ *      The SDP project people are reverse-engineering MMS:
-+ *      http://get.to/sdp
-+ */
-+
-+
-+#include <linux/module.h>
-+#include <linux/netfilter_ipv4.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <net/tcp.h>
-+#include <linux/netfilter_ipv4/ip_nat.h>
-+#include <linux/netfilter_ipv4/ip_nat_helper.h>
-+#include <linux/netfilter_ipv4/ip_nat_rule.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_mms.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
-+
-+#define DEBUGP(format, args...)
-+#define DUMP_BYTES(address, counter)
-+
-+#define MAX_PORTS 8
-+static int ports[MAX_PORTS];
-+static int ports_c = 0;
-+
-+#ifdef MODULE_PARM
-+MODULE_PARM(ports, "1-" __MODULE_STRING(MAX_PORTS) "i");
-+#endif
-+
-+MODULE_AUTHOR("Filip Sneppe <filip.sneppe@cronos.be>");
-+MODULE_DESCRIPTION("Microsoft Windows Media Services (MMS) NAT module");
-+MODULE_LICENSE("GPL");
-+
-+DECLARE_LOCK_EXTERN(ip_mms_lock);
-+
-+
-+static int mms_data_fixup(const struct ip_ct_mms_expect *ct_mms_info,
-+                          struct ip_conntrack *ct,
-+                          struct sk_buff **pskb,
-+                          enum ip_conntrack_info ctinfo,
-+                          struct ip_conntrack_expect *expect)
-+{
-+	u_int32_t newip;
-+	struct ip_conntrack_tuple t;
-+	struct iphdr *iph = (*pskb)->nh.iph;
-+	struct tcphdr *tcph = (void *) iph + iph->ihl * 4;
-+	char *data = (char *)tcph + tcph->doff * 4;
-+	int i, j, k, port;
-+	u_int16_t mms_proto;
-+
-+	u_int32_t *mms_chunkLenLV    = (u_int32_t *)(data + MMS_SRV_CHUNKLENLV_OFFSET);
-+	u_int32_t *mms_chunkLenLM    = (u_int32_t *)(data + MMS_SRV_CHUNKLENLM_OFFSET);
-+	u_int32_t *mms_messageLength = (u_int32_t *)(data + MMS_SRV_MESSAGELENGTH_OFFSET);
-+
-+	int zero_padding;
-+
-+	char buffer[28];         /* "\\255.255.255.255\UDP\65635" * 2 (for unicode) */
-+	char unicode_buffer[75]; /* 27*2 (unicode) + 20 + 1 */
-+	char proto_string[6];
-+	
-+	MUST_BE_LOCKED(&ip_mms_lock);
-+
-+	/* what was the protocol again ? */
-+	mms_proto = expect->tuple.dst.protonum;
-+	sprintf(proto_string, "%u", mms_proto);
-+	
-+	DEBUGP("ip_nat_mms: mms_data_fixup: info (seq %u + %u) in %u, proto %s\n",
-+	       expect->seq, ct_mms_info->len, ntohl(tcph->seq),
-+	       mms_proto == IPPROTO_UDP ? "UDP"
-+	       : mms_proto == IPPROTO_TCP ? "TCP":proto_string);
-+	
-+	newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-+
-+	/* Alter conntrack's expectations. */
-+	t = expect->tuple;
-+	t.dst.ip = newip;
-+	for (port = ct_mms_info->port; port != 0; port++) {
-+		t.dst.u.tcp.port = htons(port);
-+		if (ip_conntrack_change_expect(expect, &t) == 0) {
-+			DEBUGP("ip_nat_mms: mms_data_fixup: using port %d\n", port);
-+			break;
-+		}
-+	}
-+	
-+	if(port == 0)
-+		return 0;
-+
-+	sprintf(buffer, "\\\\%u.%u.%u.%u\\%s\\%u",
-+	        NIPQUAD(newip),
-+		expect->tuple.dst.protonum == IPPROTO_UDP ? "UDP"
-+		: expect->tuple.dst.protonum == IPPROTO_TCP ? "TCP":proto_string,
-+		port);
-+	DEBUGP("ip_nat_mms: new unicode string=%s\n", buffer);
-+	
-+	memset(unicode_buffer, 0, sizeof(char)*75);
-+
-+	for (i=0; i<strlen(buffer); ++i)
-+		*(unicode_buffer+i*2)=*(buffer+i);
-+	
-+	DEBUGP("ip_nat_mms: mms_data_fixup: padding: %u len: %u\n", ct_mms_info->padding, ct_mms_info->len);
-+	DEBUGP("ip_nat_mms: mms_data_fixup: offset: %u\n", MMS_SRV_UNICODE_STRING_OFFSET+ct_mms_info->len);
-+	DUMP_BYTES(data+MMS_SRV_UNICODE_STRING_OFFSET, 60);
-+	
-+	/* add end of packet to it */
-+	for (j=0; j<ct_mms_info->padding; ++j) {
-+		DEBUGP("ip_nat_mms: mms_data_fixup: i=%u j=%u byte=%u\n", 
-+		       i, j, (u8)*(data+MMS_SRV_UNICODE_STRING_OFFSET+ct_mms_info->len+j));
-+		*(unicode_buffer+i*2+j) = *(data+MMS_SRV_UNICODE_STRING_OFFSET+ct_mms_info->len+j);
-+	}
-+
-+	/* pad with zeroes at the end ? see explanation of weird math below */
-+	zero_padding = (8-(strlen(buffer)*2 + ct_mms_info->padding + 4)%8)%8;
-+	for (k=0; k<zero_padding; ++k)
-+		*(unicode_buffer+i*2+j+k)= (char)0;
-+	
-+	DEBUGP("ip_nat_mms: mms_data_fixup: zero_padding = %u\n", zero_padding);
-+	DEBUGP("ip_nat_mms: original=> chunkLenLV=%u chunkLenLM=%u messageLength=%u\n",
-+	       *mms_chunkLenLV, *mms_chunkLenLM, *mms_messageLength);
-+	
-+	/* explanation, before I forget what I did:
-+	   strlen(buffer)*2 + ct_mms_info->padding + 4 must be divisable by 8;
-+	   divide by 8 and add 3 to compute the mms_chunkLenLM field,
-+	   but note that things may have to be padded with zeroes to align by 8 
-+	   bytes, hence we add 7 and divide by 8 to get the correct length */ 
-+	*mms_chunkLenLM    = (u_int32_t) (3+(strlen(buffer)*2+ct_mms_info->padding+11)/8);
-+	*mms_chunkLenLV    = *mms_chunkLenLM+2;
-+	*mms_messageLength = *mms_chunkLenLV*8;
-+	
-+	DEBUGP("ip_nat_mms: modified=> chunkLenLV=%u chunkLenLM=%u messageLength=%u\n",
-+	       *mms_chunkLenLV, *mms_chunkLenLM, *mms_messageLength);
-+	
-+	ip_nat_mangle_tcp_packet(pskb, ct, ctinfo, 
-+	                         expect->seq - ntohl(tcph->seq),
-+	                         ct_mms_info->len + ct_mms_info->padding, unicode_buffer,
-+	                         strlen(buffer)*2 + ct_mms_info->padding + zero_padding);
-+	DUMP_BYTES(unicode_buffer, 60);
-+	
-+	return 1;
-+}
-+
-+static unsigned int
-+mms_nat_expected(struct sk_buff **pskb,
-+                 unsigned int hooknum,
-+                 struct ip_conntrack *ct,
-+                 struct ip_nat_info *info)
-+{
-+	struct ip_nat_multi_range mr;
-+	u_int32_t newdstip, newsrcip, newip;
-+
-+	struct ip_conntrack *master = master_ct(ct);
-+
-+	IP_NF_ASSERT(info);
-+	IP_NF_ASSERT(master);
-+
-+	IP_NF_ASSERT(!(info->initialized & (1 << HOOK2MANIP(hooknum))));
-+
-+	DEBUGP("ip_nat_mms: mms_nat_expected: We have a connection!\n");
-+
-+	newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-+	newsrcip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-+	DEBUGP("ip_nat_mms: mms_nat_expected: hook %s: newsrc->newdst %u.%u.%u.%u->%u.%u.%u.%u\n",
-+	       hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-+	       : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-+	       : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT" : "???",
-+	       NIPQUAD(newsrcip), NIPQUAD(newdstip));
-+
-+	if (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC)
-+		newip = newsrcip;
-+	else
-+		newip = newdstip;
-+
-+	DEBUGP("ip_nat_mms: mms_nat_expected: IP to %u.%u.%u.%u\n", NIPQUAD(newip));
-+
-+	mr.rangesize = 1;
-+	/* We don't want to manip the per-protocol, just the IPs. */
-+	mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
-+	mr.range[0].min_ip = mr.range[0].max_ip = newip;
-+
-+	return ip_nat_setup_info(ct, &mr, hooknum);
-+}
-+
-+
-+static unsigned int mms_nat_help(struct ip_conntrack *ct,
-+			 struct ip_conntrack_expect *exp,
-+			 struct ip_nat_info *info,
-+			 enum ip_conntrack_info ctinfo,
-+			 unsigned int hooknum,
-+			 struct sk_buff **pskb)
-+{
-+	struct iphdr *iph = (*pskb)->nh.iph;
-+	struct tcphdr *tcph = (void *) iph + iph->ihl * 4;
-+	unsigned int datalen;
-+	int dir;
-+	struct ip_ct_mms_expect *ct_mms_info;
-+
-+	if (!exp)
-+		DEBUGP("ip_nat_mms: no exp!!");
-+
-+	ct_mms_info = &exp->help.exp_mms_info;
-+	
-+	/* Only mangle things once: original direction in POST_ROUTING
-+	   and reply direction on PRE_ROUTING. */
-+	dir = CTINFO2DIR(ctinfo);
-+	if (!((hooknum == NF_IP_POST_ROUTING && dir == IP_CT_DIR_ORIGINAL)
-+	    ||(hooknum == NF_IP_PRE_ROUTING && dir == IP_CT_DIR_REPLY))) {
-+		DEBUGP("ip_nat_mms: mms_nat_help: not touching dir %s at hook %s\n",
-+		       dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY",
-+		       hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-+		       : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-+		       : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT" : "???");
-+		return NF_ACCEPT;
-+	}
-+	DEBUGP("ip_nat_mms: mms_nat_help: beyond not touching (dir %s at hook %s)\n",
-+	       dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY",
-+	       hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-+	       : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-+	       : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT" : "???");
-+	
-+	datalen = (*pskb)->len - iph->ihl * 4 - tcph->doff * 4;
-+	
-+	DEBUGP("ip_nat_mms: mms_nat_help: %u+%u=%u %u %u\n", exp->seq, ct_mms_info->len,
-+	       exp->seq + ct_mms_info->len,
-+	       ntohl(tcph->seq),
-+	       ntohl(tcph->seq) + datalen);
-+	
-+	LOCK_BH(&ip_mms_lock);
-+	/* Check wether the whole IP/proto/port pattern is carried in the payload */
-+	if (between(exp->seq + ct_mms_info->len,
-+	    ntohl(tcph->seq),
-+	    ntohl(tcph->seq) + datalen)) {
-+		if (!mms_data_fixup(ct_mms_info, ct, pskb, ctinfo, exp)) {
-+			UNLOCK_BH(&ip_mms_lock);
-+			return NF_DROP;
-+		}
-+	} else {
-+		/* Half a match?  This means a partial retransmisison.
-+		   It's a cracker being funky. */
-+		if (net_ratelimit()) {
-+			printk("ip_nat_mms: partial packet %u/%u in %u/%u\n",
-+			       exp->seq, ct_mms_info->len,
-+			       ntohl(tcph->seq),
-+			       ntohl(tcph->seq) + datalen);
-+		}
-+		UNLOCK_BH(&ip_mms_lock);
-+		return NF_DROP;
-+	}
-+	UNLOCK_BH(&ip_mms_lock);
-+	
-+	return NF_ACCEPT;
-+}
-+
-+static struct ip_nat_helper mms[MAX_PORTS];
-+static char mms_names[MAX_PORTS][10];
-+
-+/* Not __exit: called from init() */
-+static void fini(void)
-+{
-+	int i;
-+
-+	for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
-+		DEBUGP("ip_nat_mms: unregistering helper for port %d\n", ports[i]);
-+		ip_nat_helper_unregister(&mms[i]);
-+	}
-+}
-+
-+static int __init init(void)
-+{
-+	int i, ret = 0;
-+	char *tmpname;
-+
-+	if (ports[0] == 0)
-+		ports[0] = MMS_PORT;
-+
-+	for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
-+
-+		memset(&mms[i], 0, sizeof(struct ip_nat_helper));
-+
-+		mms[i].tuple.dst.protonum = IPPROTO_TCP;
-+		mms[i].tuple.src.u.tcp.port = htons(ports[i]);
-+		mms[i].mask.dst.protonum = 0xFFFF;
-+		mms[i].mask.src.u.tcp.port = 0xFFFF;
-+		mms[i].help = mms_nat_help;
-+		mms[i].me = THIS_MODULE;
-+		mms[i].flags = 0;
-+		mms[i].expect = mms_nat_expected;
-+
-+		tmpname = &mms_names[i][0];
-+		if (ports[i] == MMS_PORT)
-+			sprintf(tmpname, "mms");
-+		else
-+			sprintf(tmpname, "mms-%d", i);
-+		mms[i].name = tmpname;
-+
-+		DEBUGP("ip_nat_mms: register helper for port %d\n",
-+				ports[i]);
-+		ret = ip_nat_helper_register(&mms[i]);
-+
-+		if (ret) {
-+			printk("ip_nat_mms: error registering "
-+			       "helper for port %d\n", ports[i]);
-+			fini();
-+			return ret;
-+		}
-+		ports_c++;
-+	}
-+
-+	return ret;
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux-2.4.32/include/linux/netfilter_ipv4/ip_conntrack.h linux-2.4.32.new/include/linux/netfilter_ipv4/ip_conntrack.h
---- linux-2.4.32/include/linux/netfilter_ipv4/ip_conntrack.h	2006-03-01 01:12:47.910002512 +0100
-+++ linux-2.4.32.new/include/linux/netfilter_ipv4/ip_conntrack.h	2006-03-01 01:16:16.710260048 +0100
-@@ -73,6 +73,7 @@
- #include <linux/netfilter_ipv4/ip_conntrack_pptp.h>
- #include <linux/netfilter_ipv4/ip_conntrack_h323.h>
- #include <linux/netfilter_ipv4/ip_conntrack_rtsp.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_mms.h>
- 
- /* per expectation: application helper private data */
- union ip_conntrack_expect_help {
-@@ -83,6 +84,7 @@
- 	struct ip_ct_pptp_expect exp_pptp_info;
- 	struct ip_ct_h225_expect exp_h225_info;
- 	struct ip_ct_rtsp_expect exp_rtsp_info;
-+	struct ip_ct_mms_expect exp_mms_info;
- 
- #ifdef CONFIG_IP_NF_NAT_NEEDED
- 	union {
-@@ -99,6 +101,7 @@
- 	struct ip_ct_pptp_master ct_pptp_info;
- 	struct ip_ct_h225_master ct_h225_info;
- 	struct ip_ct_rtsp_master ct_rtsp_info;
-+	struct ip_ct_mms_master ct_mms_info;
- };
- 
- #ifdef CONFIG_IP_NF_NAT_NEEDED
-diff -urN linux-2.4.32/include/linux/netfilter_ipv4/ip_conntrack_mms.h linux-2.4.32.new/include/linux/netfilter_ipv4/ip_conntrack_mms.h
---- linux-2.4.32/include/linux/netfilter_ipv4/ip_conntrack_mms.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32.new/include/linux/netfilter_ipv4/ip_conntrack_mms.h	2006-03-01 01:13:32.993148832 +0100
-@@ -0,0 +1,31 @@
-+#ifndef _IP_CONNTRACK_MMS_H
-+#define _IP_CONNTRACK_MMS_H
-+/* MMS tracking. */
-+
-+#ifdef __KERNEL__
-+#include <linux/netfilter_ipv4/lockhelp.h>
-+
-+DECLARE_LOCK_EXTERN(ip_mms_lock);
-+
-+#define MMS_PORT                         1755
-+#define MMS_SRV_MSG_ID                   196610
-+
-+#define MMS_SRV_MSG_OFFSET               36
-+#define MMS_SRV_UNICODE_STRING_OFFSET    60
-+#define MMS_SRV_CHUNKLENLV_OFFSET        16
-+#define MMS_SRV_CHUNKLENLM_OFFSET        32
-+#define MMS_SRV_MESSAGELENGTH_OFFSET     8
-+#endif
-+
-+/* This structure is per expected connection */
-+struct ip_ct_mms_expect {
-+	u_int32_t len;
-+	u_int32_t padding;
-+	u_int16_t port;
-+};
-+
-+/* This structure exists only once per master */
-+struct ip_ct_mms_master {
-+};
-+
-+#endif /* _IP_CONNTRACK_MMS_H */
diff --git a/openwrt/target/linux/generic-2.4/patches/616-netfilter_imq.patch b/openwrt/target/linux/generic-2.4/patches/616-netfilter_imq.patch
deleted file mode 100644
index e2e45af882..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/616-netfilter_imq.patch
+++ /dev/null
@@ -1,748 +0,0 @@
-diff -aurN linux-2.4.28-orig/Documentation/Configure.help linux-2.4.28/Documentation/Configure.help
---- linux-2.4.28-orig/Documentation/Configure.help	2004-11-17 11:54:20.000000000 +0000
-+++ linux-2.4.28/Documentation/Configure.help	2004-12-14 11:43:42.000000000 +0000
-@@ -3147,6 +3147,22 @@
-   If you want to compile it as a module, say M here and read
-   <file:Documentation/modules.txt>.  If unsure, say `N'.
- 
-+IMQ target support
-+CONFIG_IP_NF_TARGET_IMQ
-+  This option adds a `IMQ' target which is used to specify if and
-+  to which imq device packets should get enqueued/dequeued.
-+
-+  If you want to compile it as a module, say M here and read
-+  <file:Documentation/modules.txt>.  If unsure, say `N'.
-+
-+IMQ target support
-+CONFIG_IP6_NF_TARGET_IMQ
-+  This option adds a `IMQ' target which is used to specify if and
-+  to which imq device packets should get enqueued/dequeued.
-+
-+  If you want to compile it as a module, say M here and read
-+  <file:Documentation/modules.txt>.  If unsure, say `N'.
-+
- MARK target support
- CONFIG_IP_NF_TARGET_MARK
-   This option adds a `MARK' target, which allows you to create rules
-@@ -9799,6 +9815,20 @@
-   say M here and read <file:Documentation/modules.txt>.  The module
-   will be called bonding.o.
- 
-+Intermediate queueing device support
-+CONFIG_IMQ
-+  The imq device(s) is used as placeholder for QoS queueing disciplines.
-+  Every packet entering/leaving the ip stack can be directed through
-+  the imq device where it's enqueued/dequeued to the attached qdisc.
-+  This allows you to treat network devices as classes and distribute
-+  bandwidth among them. Iptables is used to specify through which imq
-+  device, if any, packets travel.
-+
-+  If you want to compile this as a module ( = code which ca be
-+  inserted in and removed from the running kernel whenever you want),
-+  say M here and read <file:Documentation/modules.txt>.  The module
-+  will be called imq.o
-+
- SLIP (serial line) support
- CONFIG_SLIP
-   Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
-diff -aurN linux-2.4.28-orig/drivers/net/Config.in linux-2.4.28/drivers/net/Config.in
---- linux-2.4.28-orig/drivers/net/Config.in	2004-08-07 23:26:04.000000000 +0000
-+++ linux-2.4.28/drivers/net/Config.in	2004-12-14 11:43:42.000000000 +0000
-@@ -7,6 +7,11 @@
- tristate 'Dummy net driver support' CONFIG_DUMMY
- tristate 'Bonding driver support' CONFIG_BONDING
- tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
-+if [ "$CONFIG_NETFILTER" = "y" ]; then
-+  tristate 'IMQ (intermediate queueing device) support' CONFIG_IMQ
-+else
-+  comment 'IMQ needs CONFIG_NETFILTER enabled'
-+fi
- tristate 'Universal TUN/TAP device driver support' CONFIG_TUN
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-    tristate 'Ethertap network tap (OBSOLETE)' CONFIG_ETHERTAP
-diff -aurN linux-2.4.28-orig/drivers/net/Makefile linux-2.4.28/drivers/net/Makefile
---- linux-2.4.28-orig/drivers/net/Makefile	2004-08-07 23:26:04.000000000 +0000
-+++ linux-2.4.28/drivers/net/Makefile	2004-12-14 11:43:42.000000000 +0000
-@@ -170,6 +170,7 @@
- 
- obj-$(CONFIG_STRIP) += strip.o
- obj-$(CONFIG_DUMMY) += dummy.o
-+obj-$(CONFIG_IMQ) += imq.o
- obj-$(CONFIG_DE600) += de600.o
- obj-$(CONFIG_DE620) += de620.o
- obj-$(CONFIG_AT1500) += lance.o
-diff -aurN linux-2.4.28-orig/drivers/net/imq.c linux-2.4.28/drivers/net/imq.c
---- linux-2.4.28-orig/drivers/net/imq.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.4.28/drivers/net/imq.c	2004-12-14 11:43:42.000000000 +0000
-@@ -0,0 +1,321 @@
-+/*
-+ *             Pseudo-driver for the intermediate queue device.
-+ *
-+ *             This program is free software; you can redistribute it and/or
-+ *             modify it under the terms of the GNU General Public License
-+ *             as published by the Free Software Foundation; either version
-+ *             2 of the License, or (at your option) any later version.
-+ *
-+ * Authors:    Patrick McHardy, <kaber@trash.net>
-+ *
-+ * 	       The first version was written by Martin Devera, <devik@cdi.cz>
-+ *
-+ * Credits:    Jan Rafaj <imq2t@cedric.vabo.cz>
-+ *              - Update patch to 2.4.21
-+ *             Sebastian Strollo <sstrollo@nortelnetworks.com>
-+ *              - Fix "Dead-loop on netdevice imq"-issue
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/config.h>
-+#include <linux/skbuff.h>
-+#include <linux/netdevice.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/if_arp.h>
-+#include <linux/netfilter.h>
-+#include <linux/netfilter_ipv4.h>
-+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-+#include <linux/netfilter_ipv6.h>
-+#endif
-+#include <linux/imq.h>
-+#include <net/pkt_sched.h>
-+
-+static nf_hookfn imq_nf_hook;
-+
-+static struct nf_hook_ops imq_ingress_ipv4 = {
-+	{ NULL, NULL},
-+	imq_nf_hook,
-+	PF_INET,
-+	NF_IP_PRE_ROUTING,
-+	NF_IP_PRI_MANGLE + 1
-+};
-+
-+static struct nf_hook_ops imq_egress_ipv4 = {
-+	{ NULL, NULL},
-+	imq_nf_hook,
-+	PF_INET,
-+	NF_IP_POST_ROUTING,
-+	NF_IP_PRI_LAST
-+};
-+
-+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-+static struct nf_hook_ops imq_ingress_ipv6 = {
-+	{ NULL, NULL},
-+	imq_nf_hook,
-+	PF_INET6,
-+	NF_IP6_PRE_ROUTING,
-+	NF_IP6_PRI_MANGLE + 1
-+};
-+
-+static struct nf_hook_ops imq_egress_ipv6 = {
-+	{ NULL, NULL},
-+	imq_nf_hook,
-+	PF_INET6,
-+	NF_IP6_POST_ROUTING,
-+	NF_IP6_PRI_LAST
-+};
-+#endif
-+
-+static unsigned int numdevs = 2;
-+
-+MODULE_PARM(numdevs, "i");
-+MODULE_PARM_DESC(numdevs, "number of imq devices");
-+
-+static struct net_device *imq_devs;
-+
-+
-+static struct net_device_stats *imq_get_stats(struct net_device *dev)
-+{
-+	return (struct net_device_stats *)dev->priv;
-+}
-+
-+/* called for packets kfree'd in qdiscs at places other than enqueue */
-+static void imq_skb_destructor(struct sk_buff *skb)
-+{
-+	struct nf_info *info = skb->nf_info;
-+
-+	if (info) {
-+		if (info->indev)
-+			dev_put(info->indev);
-+		if (info->outdev)
-+			dev_put(info->outdev);
-+		kfree(info);
-+	}
-+}
-+
-+static int imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct net_device_stats *stats = (struct net_device_stats*) dev->priv;
-+	
-+	stats->tx_bytes += skb->len;
-+	stats->tx_packets++;
-+
-+	skb->imq_flags = 0;
-+	skb->destructor = NULL;
-+	
-+	dev->trans_start = jiffies;
-+	nf_reinject(skb, skb->nf_info, NF_ACCEPT);
-+	return 0;
-+}
-+
-+static int imq_nf_queue(struct sk_buff *skb, struct nf_info *info,
-+			void *data)
-+{
-+	struct net_device *dev;
-+	struct net_device_stats *stats;
-+	struct sk_buff *skb2 = NULL;
-+	struct Qdisc *q;
-+	unsigned int index = skb->imq_flags&IMQ_F_IFMASK;
-+	int ret = -1;
-+
-+	if (index > numdevs) 
-+		return -1;
-+	
-+	dev = imq_devs + index;
-+	if (!(dev->flags & IFF_UP)) {
-+		skb->imq_flags = 0;
-+		nf_reinject(skb, info, NF_ACCEPT);
-+		return 0;
-+	}
-+	dev->last_rx = jiffies;
-+
-+	if (skb->destructor) {
-+		skb2 = skb;
-+		skb = skb_clone(skb, GFP_ATOMIC);
-+		if (!skb)
-+			return -1;
-+	}
-+	skb->nf_info = info;
-+
-+	stats = (struct net_device_stats *)dev->priv;
-+	stats->rx_bytes+= skb->len;
-+	stats->rx_packets++;
-+	
-+	spin_lock_bh(&dev->queue_lock);
-+	q = dev->qdisc;
-+	if (q->enqueue) {
-+		q->enqueue(skb_get(skb), q);
-+		if (skb_shared(skb)) {
-+			skb->destructor = imq_skb_destructor;
-+			kfree_skb(skb);
-+			ret = 0;
-+		}
-+	}
-+	if (spin_is_locked(&dev->xmit_lock))
-+		netif_schedule(dev);
-+	else
-+		qdisc_run(dev);
-+	spin_unlock_bh(&dev->queue_lock);
-+
-+	if (skb2)
-+		kfree_skb(ret ? skb : skb2);
-+
-+	return ret;
-+}
-+
-+static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff **pskb,
-+		   const struct net_device *indev,
-+		   const struct net_device *outdev,
-+		   int (*okfn)(struct sk_buff *))
-+{
-+	if ((*pskb)->imq_flags & IMQ_F_ENQUEUE)
-+		return NF_QUEUE;
-+
-+	return NF_ACCEPT;
-+}
-+
-+
-+static int __init imq_init_hooks(void)
-+{
-+	int err;
-+
-+	if ((err = nf_register_queue_handler(PF_INET, imq_nf_queue, NULL)))
-+		goto err1;
-+	if ((err = nf_register_hook(&imq_ingress_ipv4)))
-+		goto err2;
-+	if ((err = nf_register_hook(&imq_egress_ipv4)))
-+		goto err3;
-+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-+	if ((err = nf_register_queue_handler(PF_INET6, imq_nf_queue, NULL)))
-+		goto err4;
-+	if ((err = nf_register_hook(&imq_ingress_ipv6)))
-+		goto err5;
-+	if ((err = nf_register_hook(&imq_egress_ipv6)))
-+		goto err6;
-+#endif
-+	
-+	return 0;
-+	
-+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-+err6:
-+	nf_unregister_hook(&imq_ingress_ipv6);
-+err5:
-+	nf_unregister_queue_handler(PF_INET6);
-+err4:
-+	nf_unregister_hook(&imq_egress_ipv4);
-+#endif
-+err3:
-+	nf_unregister_hook(&imq_ingress_ipv4);
-+err2:
-+	nf_unregister_queue_handler(PF_INET);
-+err1:
-+	return err;
-+}
-+
-+static void __exit imq_unhook(void)
-+{
-+	nf_unregister_hook(&imq_ingress_ipv4);
-+	nf_unregister_hook(&imq_egress_ipv4);
-+	nf_unregister_queue_handler(PF_INET);
-+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-+	nf_unregister_hook(&imq_ingress_ipv6);
-+	nf_unregister_hook(&imq_egress_ipv6);
-+	nf_unregister_queue_handler(PF_INET6);
-+#endif
-+}
-+
-+static int __init imq_dev_init(struct net_device *dev)
-+{
-+	dev->hard_start_xmit	= imq_dev_xmit;
-+	dev->type		= ARPHRD_VOID;
-+	dev->mtu		= 1500;
-+	dev->tx_queue_len	= 30;
-+	dev->flags		= IFF_NOARP;
-+	dev->priv = kmalloc(sizeof(struct net_device_stats), GFP_KERNEL);
-+	if (dev->priv == NULL)
-+		return -ENOMEM;
-+	memset(dev->priv, 0, sizeof(struct net_device_stats));
-+	dev->get_stats		= imq_get_stats;
-+
-+	return 0;
-+}
-+
-+static void imq_dev_uninit(struct net_device *dev)
-+{
-+	kfree(dev->priv);
-+}
-+
-+static int __init imq_init_devs(void)
-+{
-+	struct net_device *dev;
-+	int i;
-+
-+	if (!numdevs || numdevs > IMQ_MAX_DEVS) {
-+		printk(KERN_ERR "numdevs has to be betweed 1 and %u\n",
-+		       IMQ_MAX_DEVS);
-+		return -EINVAL;
-+	}
-+
-+	imq_devs = kmalloc(sizeof(struct net_device) * numdevs, GFP_KERNEL);
-+	if (!imq_devs)
-+		return -ENOMEM;
-+	memset(imq_devs, 0, sizeof(struct net_device) * numdevs);
-+
-+	/* we start counting at zero */
-+	numdevs--;
-+
-+	for (i = 0, dev = imq_devs; i <= numdevs; i++, dev++) {
-+		SET_MODULE_OWNER(dev);
-+		strcpy(dev->name, "imq%d");
-+		dev->init   = imq_dev_init;
-+		dev->uninit = imq_dev_uninit;
-+
-+		if (register_netdev(dev) < 0)
-+			goto err_register;
-+	}
-+	return 0;
-+
-+err_register:
-+	for (; i; i--)
-+		unregister_netdev(--dev);
-+	kfree(imq_devs);
-+	return -EIO;
-+}
-+
-+static void imq_cleanup_devs(void)
-+{
-+	int i;
-+	struct net_device *dev = imq_devs;
-+	
-+	for (i = 0; i <= numdevs; i++)
-+		unregister_netdev(dev++);
-+
-+	kfree(imq_devs);
-+}
-+
-+static int __init imq_init_module(void)
-+{
-+	int err;
-+
-+	if ((err = imq_init_devs()))
-+		return err;
-+	if ((err = imq_init_hooks())) {
-+		imq_cleanup_devs();
-+		return err;
-+	}
-+
-+	printk(KERN_INFO "imq driver loaded.\n");
-+
-+	return 0;
-+}
-+
-+static void __exit imq_cleanup_module(void)
-+{
-+	imq_unhook();
-+	imq_cleanup_devs();
-+}
-+
-+module_init(imq_init_module);
-+module_exit(imq_cleanup_module);
-+MODULE_LICENSE("GPL");
-diff -aurN linux-2.4.28-orig/include/linux/imq.h linux-2.4.28/include/linux/imq.h
---- linux-2.4.28-orig/include/linux/imq.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.4.28/include/linux/imq.h	2004-12-14 11:43:42.000000000 +0000
-@@ -0,0 +1,9 @@
-+#ifndef _IMQ_H
-+#define _IMQ_H
-+
-+#define IMQ_MAX_DEVS	16
-+
-+#define IMQ_F_IFMASK	0x7f
-+#define IMQ_F_ENQUEUE	0x80
-+
-+#endif /* _IMQ_H */
-diff -aurN linux-2.4.28-orig/include/linux/netfilter_ipv4/ipt_IMQ.h linux-2.4.28/include/linux/netfilter_ipv4/ipt_IMQ.h
---- linux-2.4.28-orig/include/linux/netfilter_ipv4/ipt_IMQ.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.4.28/include/linux/netfilter_ipv4/ipt_IMQ.h	2004-12-14 11:43:42.000000000 +0000
-@@ -0,0 +1,8 @@
-+#ifndef _IPT_IMQ_H
-+#define _IPT_IMQ_H
-+
-+struct ipt_imq_info {
-+	unsigned int todev;	/* target imq device */
-+};
-+
-+#endif /* _IPT_IMQ_H */
-diff -aurN linux-2.4.28-orig/include/linux/netfilter_ipv6/ip6t_IMQ.h linux-2.4.28/include/linux/netfilter_ipv6/ip6t_IMQ.h
---- linux-2.4.28-orig/include/linux/netfilter_ipv6/ip6t_IMQ.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.4.28/include/linux/netfilter_ipv6/ip6t_IMQ.h	2004-12-14 11:43:42.000000000 +0000
-@@ -0,0 +1,8 @@
-+#ifndef _IP6T_IMQ_H
-+#define _IP6T_IMQ_H
-+
-+struct ip6t_imq_info {
-+	unsigned int todev;	/* target imq device */
-+};
-+
-+#endif /* _IP6T_IMQ_H */
-diff -aurN linux-2.4.28-orig/include/linux/skbuff.h linux-2.4.28/include/linux/skbuff.h
---- linux-2.4.28-orig/include/linux/skbuff.h	2004-08-07 23:26:06.000000000 +0000
-+++ linux-2.4.28/include/linux/skbuff.h	2004-12-14 11:43:42.000000000 +0000
-@@ -93,6 +93,9 @@
- 	struct nf_conntrack *master;
- };
- #endif
-+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-+struct nf_info;
-+#endif
- 
- struct sk_buff_head {
- 	/* These two members must be first. */
-@@ -182,7 +185,7 @@
- 	unsigned int 	len;			/* Length of actual data			*/
-  	unsigned int 	data_len;
- 	unsigned int	csum;			/* Checksum 					*/
--	unsigned char 	__unused,		/* Dead field, may be reused			*/
-+	unsigned char 	imq_flags,		/* intermediate queueing device	*/
- 			cloned, 		/* head may be cloned (check refcnt to be sure). */
-   			pkt_type,		/* Packet class					*/
-   			ip_summed;		/* Driver fed us an IP checksum			*/
-@@ -219,6 +222,9 @@
- #ifdef CONFIG_NET_SCHED
-        __u32           tc_index;               /* traffic control index */
- #endif
-+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-+       struct nf_info	*nf_info;
-+#endif
- };
- 
- #ifdef __KERNEL__
-diff -aurN linux-2.4.28-orig/net/core/skbuff.c linux-2.4.28/net/core/skbuff.c
---- linux-2.4.28-orig/net/core/skbuff.c	2003-08-25 11:44:44.000000000 +0000
-+++ linux-2.4.28/net/core/skbuff.c	2004-12-14 11:43:42.000000000 +0000
-@@ -202,6 +202,10 @@
- 	/* Set up other state */
- 	skb->len = 0;
- 	skb->cloned = 0;
-+#if defined(CONFIG_IMQ) || defined (CONFIG_IMQ_MODULE)
-+	skb->imq_flags = 0;
-+	skb->nf_info = NULL;
-+#endif
- 	skb->data_len = 0;
- 
- 	atomic_set(&skb->users, 1); 
-@@ -250,6 +254,10 @@
- #ifdef CONFIG_NET_SCHED
- 	skb->tc_index = 0;
- #endif
-+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-+	skb->imq_flags = 0;
-+	skb->nf_info = NULL;
-+#endif
- }
- 
- static void skb_drop_fraglist(struct sk_buff *skb)
-@@ -400,6 +408,10 @@
- #ifdef CONFIG_NET_SCHED
- 	C(tc_index);
- #endif
-+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-+	C(imq_flags);
-+	C(nf_info);
-+#endif
- 
- 	atomic_inc(&(skb_shinfo(skb)->dataref));
- 	skb->cloned = 1;
-@@ -444,6 +456,10 @@
- #ifdef CONFIG_NET_SCHED
- 	new->tc_index = old->tc_index;
- #endif
-+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-+	new->imq_flags=old->imq_flags;
-+	new->nf_info=old->nf_info;
-+#endif
- }
- 
- /**
-diff -aurN linux-2.4.28-orig/net/ipv4/netfilter/Config.in linux-2.4.28/net/ipv4/netfilter/Config.in
---- linux-2.4.28-orig/net/ipv4/netfilter/Config.in	2003-08-25 11:44:44.000000000 +0000
-+++ linux-2.4.28/net/ipv4/netfilter/Config.in	2004-12-14 11:43:43.000000000 +0000
-@@ -104,6 +104,7 @@
-     dep_tristate '    DSCP target support' CONFIG_IP_NF_TARGET_DSCP $CONFIG_IP_NF_MANGLE
-  
-     dep_tristate '    MARK target support' CONFIG_IP_NF_TARGET_MARK $CONFIG_IP_NF_MANGLE
-+    dep_tristate '    IMQ target support' CONFIG_IP_NF_TARGET_IMQ $CONFIG_IP_NF_MANGLE
-   fi
-   dep_tristate '  LOG target support' CONFIG_IP_NF_TARGET_LOG $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  ULOG target support' CONFIG_IP_NF_TARGET_ULOG $CONFIG_IP_NF_IPTABLES
-diff -aurN linux-2.4.28-orig/net/ipv4/netfilter/Makefile linux-2.4.28/net/ipv4/netfilter/Makefile
---- linux-2.4.28-orig/net/ipv4/netfilter/Makefile	2003-08-25 11:44:44.000000000 +0000
-+++ linux-2.4.28/net/ipv4/netfilter/Makefile	2004-12-14 11:43:43.000000000 +0000
-@@ -94,6 +94,7 @@
- obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
- obj-$(CONFIG_IP_NF_TARGET_DSCP) += ipt_DSCP.o
- obj-$(CONFIG_IP_NF_TARGET_MARK) += ipt_MARK.o
-+obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o
- obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
- obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
- obj-$(CONFIG_IP_NF_NAT_SNMP_BASIC) += ip_nat_snmp_basic.o
-diff -aurN linux-2.4.28-orig/net/ipv4/netfilter/ipt_IMQ.c linux-2.4.28/net/ipv4/netfilter/ipt_IMQ.c
---- linux-2.4.28-orig/net/ipv4/netfilter/ipt_IMQ.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.4.28/net/ipv4/netfilter/ipt_IMQ.c	2004-12-14 11:43:43.000000000 +0000
-@@ -0,0 +1,78 @@
-+/* This target marks packets to be enqueued to an imq device */
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ipt_IMQ.h>
-+#include <linux/imq.h>
-+
-+static unsigned int imq_target(struct sk_buff **pskb,
-+			       unsigned int hooknum,
-+			       const struct net_device *in,
-+			       const struct net_device *out,
-+			       const void *targinfo,
-+			       void *userinfo)
-+{
-+	struct ipt_imq_info *mr = (struct ipt_imq_info*)targinfo;
-+
-+	(*pskb)->imq_flags = mr->todev | IMQ_F_ENQUEUE;
-+	(*pskb)->nfcache |= NFC_ALTERED;
-+
-+	return IPT_CONTINUE;
-+}
-+
-+static int imq_checkentry(const char *tablename,
-+			  const struct ipt_entry *e,
-+			  void *targinfo,
-+			  unsigned int targinfosize,
-+			  unsigned int hook_mask)
-+{
-+	struct ipt_imq_info *mr;
-+
-+	if (targinfosize != IPT_ALIGN(sizeof(struct ipt_imq_info))) {
-+		printk(KERN_WARNING "IMQ: invalid targinfosize\n");
-+		return 0;
-+	}
-+	mr = (struct ipt_imq_info*)targinfo;
-+
-+	if (strcmp(tablename, "mangle") != 0) {
-+		printk(KERN_WARNING
-+		       "IMQ: IMQ can only be called from \"mangle\" table, not \"%s\"\n",
-+		       tablename);
-+		return 0;
-+	}
-+	
-+	if (mr->todev > IMQ_MAX_DEVS) {
-+		printk(KERN_WARNING
-+		       "IMQ: invalid device specified, highest is %u\n",
-+		       IMQ_MAX_DEVS);
-+		return 0;
-+	}
-+	
-+	return 1;
-+}
-+
-+static struct ipt_target ipt_imq_reg = {
-+	{ NULL, NULL},
-+	"IMQ",
-+	imq_target,
-+	imq_checkentry,
-+	NULL,
-+	THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+	if (ipt_register_target(&ipt_imq_reg))
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_target(&ipt_imq_reg);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+MODULE_LICENSE("GPL");
-diff -aurN linux-2.4.28-orig/net/ipv6/netfilter/Config.in linux-2.4.28/net/ipv6/netfilter/Config.in
---- linux-2.4.28-orig/net/ipv6/netfilter/Config.in	2003-06-13 14:51:39.000000000 +0000
-+++ linux-2.4.28/net/ipv6/netfilter/Config.in	2004-12-14 11:43:43.000000000 +0000
-@@ -71,6 +71,7 @@
-   if [ "$CONFIG_IP6_NF_MANGLE" != "n" ]; then
- #    dep_tristate '    TOS target support' CONFIG_IP6_NF_TARGET_TOS $CONFIG_IP_NF_MANGLE
-     dep_tristate '    MARK target support' CONFIG_IP6_NF_TARGET_MARK $CONFIG_IP6_NF_MANGLE
-+    dep_tristate '    IMQ target support' CONFIG_IP6_NF_TARGET_IMQ $CONFIG_IP6_NF_MANGLE
-   fi
-   #dep_tristate '  LOG target support' CONFIG_IP6_NF_TARGET_LOG $CONFIG_IP6_NF_IPTABLES
- fi
-diff -aurN linux-2.4.28-orig/net/ipv6/netfilter/Makefile linux-2.4.28/net/ipv6/netfilter/Makefile
---- linux-2.4.28-orig/net/ipv6/netfilter/Makefile	2003-06-13 14:51:39.000000000 +0000
-+++ linux-2.4.28/net/ipv6/netfilter/Makefile	2004-12-14 11:43:43.000000000 +0000
-@@ -28,6 +28,7 @@
- obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o
- obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o
- obj-$(CONFIG_IP6_NF_TARGET_MARK) += ip6t_MARK.o
-+obj-$(CONFIG_IP6_NF_TARGET_IMQ) += ip6t_IMQ.o
- obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o
- obj-$(CONFIG_IP6_NF_TARGET_LOG) += ip6t_LOG.o
- obj-$(CONFIG_IP6_NF_MATCH_HL) += ip6t_hl.o
-diff -aurN linux-2.4.28-orig/net/ipv6/netfilter/ip6t_IMQ.c linux-2.4.28/net/ipv6/netfilter/ip6t_IMQ.c
---- linux-2.4.28-orig/net/ipv6/netfilter/ip6t_IMQ.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.4.28/net/ipv6/netfilter/ip6t_IMQ.c	2004-12-14 11:43:43.000000000 +0000
-@@ -0,0 +1,78 @@
-+/* This target marks packets to be enqueued to an imq device */
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv6/ip6_tables.h>
-+#include <linux/netfilter_ipv6/ip6t_IMQ.h>
-+#include <linux/imq.h>
-+
-+static unsigned int imq_target(struct sk_buff **pskb,
-+			       unsigned int hooknum,
-+			       const struct net_device *in,
-+			       const struct net_device *out,
-+			       const void *targinfo,
-+			       void *userinfo)
-+{
-+	struct ip6t_imq_info *mr = (struct ip6t_imq_info*)targinfo;
-+
-+	(*pskb)->imq_flags = mr->todev | IMQ_F_ENQUEUE;
-+	(*pskb)->nfcache |= NFC_ALTERED;
-+
-+	return IP6T_CONTINUE;
-+}
-+
-+static int imq_checkentry(const char *tablename,
-+			  const struct ip6t_entry *e,
-+			  void *targinfo,
-+			  unsigned int targinfosize,
-+			  unsigned int hook_mask)
-+{
-+	struct ip6t_imq_info *mr;
-+
-+	if (targinfosize != IP6T_ALIGN(sizeof(struct ip6t_imq_info))) {
-+		printk(KERN_WARNING "IMQ: invalid targinfosize\n");
-+		return 0;
-+	}
-+	mr = (struct ip6t_imq_info*)targinfo;
-+
-+	if (strcmp(tablename, "mangle") != 0) {
-+		printk(KERN_WARNING
-+		       "IMQ: IMQ can only be called from \"mangle\" table, not \"%s\"\n",
-+		       tablename);
-+		return 0;
-+	}
-+	
-+	if (mr->todev > IMQ_MAX_DEVS) {
-+		printk(KERN_WARNING
-+		       "IMQ: invalid device specified, highest is %u\n",
-+		       IMQ_MAX_DEVS);
-+		return 0;
-+	}
-+	
-+	return 1;
-+}
-+
-+static struct ip6t_target ip6t_imq_reg = {
-+	{ NULL, NULL},
-+	"IMQ",
-+	imq_target,
-+	imq_checkentry,
-+	NULL,
-+	THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+	if (ip6t_register_target(&ip6t_imq_reg))
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+static void __exit fini(void)
-+{
-+	ip6t_unregister_target(&ip6t_imq_reg);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+MODULE_LICENSE("GPL");
-diff -aurN linux-2.4.28-orig/net/sched/sch_generic.c linux-2.4.28/net/sched/sch_generic.c
---- linux-2.4.28-orig/net/sched/sch_generic.c	2004-11-17 11:54:22.000000000 +0000
-+++ linux-2.4.28/net/sched/sch_generic.c	2004-12-14 11:44:27.000000000 +0000
-@@ -29,6 +29,9 @@
- #include <linux/skbuff.h>
- #include <linux/rtnetlink.h>
- #include <linux/init.h>
-+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-+#include <linux/imq.h>
-+#endif
- #include <linux/list.h>
- #include <net/sock.h>
- #include <net/pkt_sched.h>
-@@ -90,7 +93,11 @@
- 			spin_unlock(&dev->queue_lock);
- 
- 			if (!netif_queue_stopped(dev)) {
--				if (netdev_nit)
-+				if (netdev_nit
-+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-+				    && !(skb->imq_flags & IMQ_F_ENQUEUE)
-+#endif
-+				    )
- 					dev_queue_xmit_nit(skb, dev);
- 
- 				if (dev->hard_start_xmit(skb, dev) == 0) {
diff --git a/openwrt/target/linux/generic-2.4/patches/617-netfilter_time.patch b/openwrt/target/linux/generic-2.4/patches/617-netfilter_time.patch
deleted file mode 100644
index 3593571b46..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/617-netfilter_time.patch
+++ /dev/null
@@ -1,238 +0,0 @@
-diff -urN linux-2.4.32.orig/net/ipv4/netfilter/Config.in linux-2.4.32/net/ipv4/netfilter/Config.in
---- linux-2.4.32.orig/net/ipv4/netfilter/Config.in	2006-01-07 12:11:37.000000000 +0100
-+++ linux-2.4.32/net/ipv4/netfilter/Config.in	2006-01-07 12:15:45.000000000 +0100
-@@ -48,6 +48,7 @@
-   dep_tristate '  netfilter MARK match support' CONFIG_IP_NF_MATCH_MARK $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  Multiple port match support' CONFIG_IP_NF_MATCH_MULTIPORT $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  TOS match support' CONFIG_IP_NF_MATCH_TOS $CONFIG_IP_NF_IPTABLES
-+  dep_tristate '  TIME match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_TIME $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  condition match support' CONFIG_IP_NF_MATCH_CONDITION $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  recent match support' CONFIG_IP_NF_MATCH_RECENT $CONFIG_IP_NF_IPTABLES
-   dep_tristate '  ECN match support' CONFIG_IP_NF_MATCH_ECN $CONFIG_IP_NF_IPTABLES
-diff -urN linux-2.4.32.orig/net/ipv4/netfilter/ipt_time.c linux-2.4.32/net/ipv4/netfilter/ipt_time.c
---- linux-2.4.32.orig/net/ipv4/netfilter/ipt_time.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32/net/ipv4/netfilter/ipt_time.c	2006-01-07 12:14:32.000000000 +0100
-@@ -0,0 +1,193 @@
-+/*
-+  This is a module which is used for time matching
-+  It is using some modified code from dietlibc (localtime() function)
-+  that you can find at http://www.fefe.de/dietlibc/
-+  This file is distributed under the terms of the GNU General Public
-+  License (GPL). Copies of the GPL can be obtained from: ftp://prep.ai.mit.edu/pub/gnu/GPL
-+  2001-05-04 Fabrice MARIE <fabrice@netfilter.org> : initial development.
-+  2001-21-05 Fabrice MARIE <fabrice@netfilter.org> : bug fix in the match code,
-+     thanks to "Zeng Yu" <zengy@capitel.com.cn> for bug report.
-+  2001-26-09 Fabrice MARIE <fabrice@netfilter.org> : force the match to be in LOCAL_IN or PRE_ROUTING only.
-+  2001-30-11 Fabrice : added the possibility to use the match in FORWARD/OUTPUT with a little hack,
-+     added Nguyen Dang Phuoc Dong <dongnd@tlnet.com.vn> patch to support timezones.
-+  2004-05-02 Fabrice : added support for date matching, from an idea of Fabien COELHO.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ipt_time.h>
-+#include <linux/time.h>
-+
-+MODULE_AUTHOR("Fabrice MARIE <fabrice@netfilter.org>");
-+MODULE_DESCRIPTION("Match arrival timestamp/date");
-+MODULE_LICENSE("GPL");
-+
-+struct tm
-+{
-+	int tm_sec;                   /* Seconds.     [0-60] (1 leap second) */
-+	int tm_min;                   /* Minutes.     [0-59] */
-+	int tm_hour;                  /* Hours.       [0-23] */
-+	int tm_mday;                  /* Day.         [1-31] */
-+	int tm_mon;                   /* Month.       [0-11] */
-+	int tm_year;                  /* Year - 1900.  */
-+	int tm_wday;                  /* Day of week. [0-6] */
-+	int tm_yday;                  /* Days in year.[0-365] */
-+	int tm_isdst;                 /* DST.         [-1/0/1]*/
-+
-+	long int tm_gmtoff;           /* we don't care, we count from GMT */
-+	const char *tm_zone;          /* we don't care, we count from GMT */
-+};
-+
-+void
-+localtime(const time_t *timepr, struct tm *r);
-+
-+static int
-+match(const struct sk_buff *skb,
-+      const struct net_device *in,
-+      const struct net_device *out,
-+      const void *matchinfo,
-+      int offset,
-+      const void *hdr,
-+      u_int16_t datalen,
-+      int *hotdrop)
-+{
-+	const struct ipt_time_info *info = matchinfo;   /* match info for rule */
-+	struct tm currenttime;                          /* time human readable */
-+	u_int8_t days_of_week[7] = {64, 32, 16, 8, 4, 2, 1};
-+	u_int16_t packet_time;
-+	struct timeval kerneltimeval;
-+	time_t packet_local_time;
-+
-+	/* if kerneltime=1, we don't read the skb->timestamp but kernel time instead */
-+	if (info->kerneltime)
-+	{
-+		do_gettimeofday(&kerneltimeval);
-+		packet_local_time = kerneltimeval.tv_sec;
-+	}
-+	else
-+		packet_local_time = skb->stamp.tv_sec;
-+
-+	/* First we make sure we are in the date start-stop boundaries */
-+	if ((packet_local_time < info->date_start) || (packet_local_time > info->date_stop))
-+		return 0; /* We are outside the date boundaries */
-+
-+	/* Transform the timestamp of the packet, in a human readable form */
-+	localtime(&packet_local_time, &currenttime);
-+
-+	/* check if we match this timestamp, we start by the days... */
-+	if ((days_of_week[currenttime.tm_wday] & info->days_match) != days_of_week[currenttime.tm_wday])
-+		return 0; /* the day doesn't match */
-+
-+	/* ... check the time now */
-+	packet_time = (currenttime.tm_hour * 60) + currenttime.tm_min;
-+	if ((packet_time < info->time_start) || (packet_time > info->time_stop))
-+		return 0;
-+
-+	/* here we match ! */
-+	return 1;
-+}
-+
-+static int
-+checkentry(const char *tablename,
-+           const struct ipt_ip *ip,
-+           void *matchinfo,
-+           unsigned int matchsize,
-+           unsigned int hook_mask)
-+{
-+	struct ipt_time_info *info = matchinfo;   /* match info for rule */
-+
-+	/* First, check that we are in the correct hooks */
-+	if (hook_mask
-+            & ~((1 << NF_IP_PRE_ROUTING) | (1 << NF_IP_LOCAL_IN) | (1 << NF_IP_FORWARD) | (1 << NF_IP_LOCAL_OUT)))
-+	{
-+		printk("ipt_time: error, only valid for PRE_ROUTING, LOCAL_IN, FORWARD and OUTPUT)\n");
-+		return 0;
-+	}
-+	/* we use the kerneltime if we are in forward or output */
-+	info->kerneltime = 1;
-+	if (hook_mask & ~((1 << NF_IP_FORWARD) | (1 << NF_IP_LOCAL_OUT))) 
-+		/* we use the skb time */
-+		info->kerneltime = 0;
-+
-+	/* Check the size */
-+	if (matchsize != IPT_ALIGN(sizeof(struct ipt_time_info)))
-+		return 0;
-+	/* Now check the coherence of the data ... */
-+	if ((info->time_start > 1439) ||        /* 23*60+59 = 1439*/
-+	    (info->time_stop  > 1439))
-+	{
-+		printk(KERN_WARNING "ipt_time: invalid argument\n");
-+		return 0;
-+	}
-+
-+	return 1;
-+}
-+
-+static struct ipt_match time_match = {
-+	.name		= "time",
-+	.match		= match,
-+	.checkentry	= checkentry,
-+	.me		= THIS_MODULE,
-+};
-+
-+static int __init init(void)
-+{
-+	printk("ipt_time loading\n");
-+	return ipt_register_match(&time_match);
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_match(&time_match);
-+	printk("ipt_time unloaded\n");
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
-+
-+/* The part below is borowed and modified from dietlibc */
-+
-+/* seconds per day */
-+#define SPD 24*60*60
-+
-+void
-+localtime(const time_t *timepr, struct tm *r) {
-+	time_t i;
-+	time_t timep;
-+	extern struct timezone sys_tz;
-+	const unsigned int __spm[12] =
-+		{ 0,
-+		  (31),
-+		  (31+28),
-+		  (31+28+31),
-+		  (31+28+31+30),
-+		  (31+28+31+30+31),
-+		  (31+28+31+30+31+30),
-+		  (31+28+31+30+31+30+31),
-+		  (31+28+31+30+31+30+31+31),
-+		  (31+28+31+30+31+30+31+31+30),
-+		  (31+28+31+30+31+30+31+31+30+31),
-+		  (31+28+31+30+31+30+31+31+30+31+30),
-+		};
-+	register time_t work;
-+
-+	timep = (*timepr) - (sys_tz.tz_minuteswest * 60);
-+	work=timep%(SPD);
-+	r->tm_sec=work%60; work/=60;
-+	r->tm_min=work%60; r->tm_hour=work/60;
-+	work=timep/(SPD);
-+	r->tm_wday=(4+work)%7;
-+	for (i=1970; ; ++i) {
-+		register time_t k= (!(i%4) && ((i%100) || !(i%400)))?366:365;
-+		if (work>k)
-+			work-=k;
-+		else
-+			break;
-+	}
-+	r->tm_year=i-1900;
-+	for (i=11; i && __spm[i]>work; --i) ;
-+	r->tm_mon=i;
-+	r->tm_mday=work-__spm[i]+1;
-+}
-diff -urN linux-2.4.32.orig/net/ipv4/netfilter/Makefile linux-2.4.32/net/ipv4/netfilter/Makefile
---- linux-2.4.32.orig/net/ipv4/netfilter/Makefile	2006-01-07 12:11:37.000000000 +0100
-+++ linux-2.4.32/net/ipv4/netfilter/Makefile	2006-01-07 12:16:07.000000000 +0100
-@@ -118,6 +118,7 @@
- obj-$(CONFIG_IP_NF_MATCH_MULTIPORT) += ipt_multiport.o
- obj-$(CONFIG_IP_NF_MATCH_OWNER) += ipt_owner.o
- obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o
-+obj-$(CONFIG_IP_NF_MATCH_TIME) += ipt_time.o
- obj-$(CONFIG_IP_NF_MATCH_CONDITION) += ipt_condition.o
- 
- obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o
-diff -urN linux-2.4.32.orig/include/linux/netfilter_ipv4/ipt_time.h linux-2.4.32/include/linux/netfilter_ipv4/ipt_time.h
---- linux-2.4.32.orig/include/linux/netfilter_ipv4/ipt_time.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32/include/linux/netfilter_ipv4/ipt_time.h	2006-01-07 12:16:42.000000000 +0100
-@@ -0,0 +1,15 @@
-+#ifndef __ipt_time_h_included__
-+#define __ipt_time_h_included__
-+
-+
-+struct ipt_time_info {
-+	u_int8_t  days_match;   /* 1 bit per day. -SMTWTFS                      */
-+	u_int16_t time_start;   /* 0 < time_start < 23*60+59 = 1439             */
-+	u_int16_t time_stop;    /* 0:0 < time_stat < 23:59                      */
-+	u_int8_t  kerneltime;   /* ignore skb time (and use kerneltime) or not. */
-+	time_t    date_start;
-+	time_t    date_stop;
-+};
-+
-+
-+#endif /* __ipt_time_h_included__ */
diff --git a/openwrt/target/linux/generic-2.4/patches/618-netfilter_multiport_backport.patch b/openwrt/target/linux/generic-2.4/patches/618-netfilter_multiport_backport.patch
deleted file mode 100644
index c34f9ecbb7..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/618-netfilter_multiport_backport.patch
+++ /dev/null
@@ -1,231 +0,0 @@
-diff -urN linux.old/include/linux/netfilter_ipv4/ipt_multiport.h linux.dev/include/linux/netfilter_ipv4/ipt_multiport.h
---- linux.old/include/linux/netfilter_ipv4/ipt_multiport.h	2000-12-11 22:31:30.000000000 +0100
-+++ linux.dev/include/linux/netfilter_ipv4/ipt_multiport.h	2006-02-04 05:23:54.318518250 +0100
-@@ -11,11 +11,12 @@
- 
- #define IPT_MULTI_PORTS	15
- 
--/* Must fit inside union ipt_matchinfo: 16 bytes */
--struct ipt_multiport
-+struct ipt_multiport_v1
- {
- 	u_int8_t flags;				/* Type of comparison */
- 	u_int8_t count;				/* Number of ports */
- 	u_int16_t ports[IPT_MULTI_PORTS];	/* Ports */
-+	u_int8_t pflags[IPT_MULTI_PORTS];	/* Port flags */
-+	u_int8_t invert;			/* Invert flag */
- };
- #endif /*_IPT_MULTIPORT_H*/
-diff -urN linux.old/net/ipv4/netfilter/ipt_multiport.c linux.dev/net/ipv4/netfilter/ipt_multiport.c
---- linux.old/net/ipv4/netfilter/ipt_multiport.c	2003-06-13 16:51:39.000000000 +0200
-+++ linux.dev/net/ipv4/netfilter/ipt_multiport.c	2006-02-04 05:34:27.362081000 +0100
-@@ -1,5 +1,14 @@
- /* Kernel module to match one of a list of TCP/UDP ports: ports are in
-    the same place so we can treat them as equal. */
-+
-+/* (C) 1999-2001 Paul `Rusty' Russell
-+ * (C) 2002-2004 Netfilter Core Team <coreteam@netfilter.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
- #include <linux/module.h>
- #include <linux/types.h>
- #include <linux/udp.h>
-@@ -8,97 +17,136 @@
- #include <linux/netfilter_ipv4/ipt_multiport.h>
- #include <linux/netfilter_ipv4/ip_tables.h>
- 
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Netfilter Core Team <coreteam@netfilter.org>");
-+MODULE_DESCRIPTION("iptables multiple port match module");
-+
- #if 0
- #define duprintf(format, args...) printk(format , ## args)
- #else
- #define duprintf(format, args...)
- #endif
- 
-+/* from linux 2.6 skbuff.h */
-+static inline void *skb_header_pointer(const struct sk_buff *skb, int offset,
-+				       int len, void *buffer)
-+{
-+	int hlen = skb_headlen(skb);
-+
-+	if (hlen - offset >= len)
-+		return skb->data + offset;
-+
-+	if (skb_copy_bits(skb, offset, buffer, len) < 0)
-+		return NULL;
-+
-+	return buffer;
-+}
-+
-+
- /* Returns 1 if the port is matched by the test, 0 otherwise. */
- static inline int
--ports_match(const u_int16_t *portlist, enum ipt_multiport_flags flags,
--	    u_int8_t count, u_int16_t src, u_int16_t dst)
-+ports_match_v1(const struct ipt_multiport_v1 *minfo,
-+	       u_int16_t src, u_int16_t dst)
- {
- 	unsigned int i;
--	for (i=0; i<count; i++) {
--		if (flags != IPT_MULTIPORT_DESTINATION
--		    && portlist[i] == src)
--			return 1;
--
--		if (flags != IPT_MULTIPORT_SOURCE
--		    && portlist[i] == dst)
--			return 1;
--	}
-+	u_int16_t s, e;
- 
--	return 0;
-+	for (i=0; i < minfo->count; i++) {
-+		s = minfo->ports[i];
-+
-+		if (minfo->pflags[i]) {
-+			/* range port matching */
-+			e = minfo->ports[++i];
-+			duprintf("src or dst matches with %d-%d?\n", s, e);
-+
-+			if (minfo->flags == IPT_MULTIPORT_SOURCE
-+			    && src >= s && src <= e)
-+				return 1 ^ minfo->invert;
-+			if (minfo->flags == IPT_MULTIPORT_DESTINATION
-+			    && dst >= s && dst <= e)
-+				return 1 ^ minfo->invert;
-+			if (minfo->flags == IPT_MULTIPORT_EITHER
-+			    && ((dst >= s && dst <= e)
-+				|| (src >= s && src <= e)))
-+				return 1 ^ minfo->invert;
-+		} else {
-+			/* exact port matching */
-+			duprintf("src or dst matches with %d?\n", s);
-+
-+			if (minfo->flags == IPT_MULTIPORT_SOURCE
-+			    && src == s)
-+				return 1 ^ minfo->invert;
-+			if (minfo->flags == IPT_MULTIPORT_DESTINATION
-+			    && dst == s)
-+				return 1 ^ minfo->invert;
-+			if (minfo->flags == IPT_MULTIPORT_EITHER
-+			    && (src == s || dst == s))
-+				return 1 ^ minfo->invert;
-+		}
-+	}
-+ 
-+ 	return minfo->invert;
- }
- 
- static int
--match(const struct sk_buff *skb,
--      const struct net_device *in,
--      const struct net_device *out,
--      const void *matchinfo,
--      int offset,
--      const void *hdr,
--      u_int16_t datalen,
--      int *hotdrop)
-+match_v1(const struct sk_buff *skb,
-+	 const struct net_device *in,
-+	 const struct net_device *out,
-+	 const void *matchinfo,
-+	 int offset,
-+	 int *hotdrop)
- {
--	const struct udphdr *udp = hdr;
--	const struct ipt_multiport *multiinfo = matchinfo;
-+	u16 _ports[2], *pptr;
-+	const struct ipt_multiport_v1 *multiinfo = matchinfo;
-+
-+	if (offset)
-+		return 0;
- 
--	/* Must be big enough to read ports. */
--	if (offset == 0 && datalen < sizeof(struct udphdr)) {
-+	pptr = skb_header_pointer(skb, skb->nh.iph->ihl * 4,
-+				  sizeof(_ports), _ports);
-+	if (pptr == NULL) {
- 		/* We've been asked to examine this packet, and we
--		   can't.  Hence, no choice but to drop. */
--			duprintf("ipt_multiport:"
--				 " Dropping evil offset=0 tinygram.\n");
--			*hotdrop = 1;
--			return 0;
-+		 * can't.  Hence, no choice but to drop.
-+		 */
-+		duprintf("ipt_multiport:"
-+			 " Dropping evil offset=0 tinygram.\n");
-+		*hotdrop = 1;
-+		return 0;
- 	}
- 
--	/* Must not be a fragment. */
--	return !offset
--		&& ports_match(multiinfo->ports,
--			       multiinfo->flags, multiinfo->count,
--			       ntohs(udp->source), ntohs(udp->dest));
-+	return ports_match_v1(multiinfo, ntohs(pptr[0]), ntohs(pptr[1]));
- }
- 
--/* Called when user tries to insert an entry of this type. */
- static int
--checkentry(const char *tablename,
--	   const struct ipt_ip *ip,
--	   void *matchinfo,
--	   unsigned int matchsize,
--	   unsigned int hook_mask)
-+checkentry_v1(const char *tablename,
-+	      const struct ipt_ip *ip,
-+	      void *matchinfo,
-+	      unsigned int matchsize,
-+	      unsigned int hook_mask)
- {
--	const struct ipt_multiport *multiinfo = matchinfo;
--
--	if (matchsize != IPT_ALIGN(sizeof(struct ipt_multiport)))
--		return 0;
--
--	/* Must specify proto == TCP/UDP, no unknown flags or bad count */
--	return (ip->proto == IPPROTO_TCP || ip->proto == IPPROTO_UDP)
--		&& !(ip->invflags & IPT_INV_PROTO)
--		&& matchsize == IPT_ALIGN(sizeof(struct ipt_multiport))
--		&& (multiinfo->flags == IPT_MULTIPORT_SOURCE
--		    || multiinfo->flags == IPT_MULTIPORT_DESTINATION
--		    || multiinfo->flags == IPT_MULTIPORT_EITHER)
--		&& multiinfo->count <= IPT_MULTI_PORTS;
-+	return (matchsize == IPT_ALIGN(sizeof(struct ipt_multiport_v1)));
- }
- 
--static struct ipt_match multiport_match
--= { { NULL, NULL }, "multiport", &match, &checkentry, NULL, THIS_MODULE };
-+static struct ipt_match multiport_match_v1 = {
-+	.name		= "multiport",
-+	.match		= &match_v1,
-+	.checkentry	= &checkentry_v1,
-+	.me		= THIS_MODULE,
-+};
- 
- static int __init init(void)
- {
--	return ipt_register_match(&multiport_match);
-+	int err;
-+
-+	err = ipt_register_match(&multiport_match_v1);
-+
-+	return err;
- }
- 
- static void __exit fini(void)
- {
--	ipt_unregister_match(&multiport_match);
-+	ipt_unregister_match(&multiport_match_v1);
- }
- 
- module_init(init);
- module_exit(fini);
--MODULE_LICENSE("GPL");
diff --git a/openwrt/target/linux/generic-2.4/patches/700-multiple_default_gateways.patch b/openwrt/target/linux/generic-2.4/patches/700-multiple_default_gateways.patch
deleted file mode 100644
index 46407c85f2..0000000000
--- a/openwrt/target/linux/generic-2.4/patches/700-multiple_default_gateways.patch
+++ /dev/null
@@ -1,1299 +0,0 @@
-diff -ur v2.4.29/linux/include/linux/netfilter_ipv4/ip_nat.h linux/include/linux/netfilter_ipv4/ip_nat.h
---- v2.4.29/linux/include/linux/netfilter_ipv4/ip_nat.h	2005-01-20 09:25:34.000000000 +0200
-+++ linux/include/linux/netfilter_ipv4/ip_nat.h	2005-01-20 09:55:46.998651976 +0200
-@@ -121,5 +121,13 @@
- extern u_int16_t ip_nat_cheat_check(u_int32_t oldvalinv,
- 				    u_int32_t newval,
- 				    u_int16_t oldcheck);
-+
-+/* Call input routing for SNAT-ed traffic */
-+extern unsigned int ip_nat_route_input(unsigned int hooknum,
-+				       struct sk_buff **pskb,
-+				       const struct net_device *in,
-+				       const struct net_device *out,
-+				       int (*okfn)(struct sk_buff *));
-+
- #endif /*__KERNEL__*/
- #endif
-diff -ur v2.4.29/linux/include/linux/rtnetlink.h linux/include/linux/rtnetlink.h
---- v2.4.29/linux/include/linux/rtnetlink.h	2004-08-08 10:56:48.000000000 +0300
-+++ linux/include/linux/rtnetlink.h	2005-01-20 09:55:33.431714464 +0200
-@@ -234,6 +234,8 @@
- #define RTNH_F_DEAD		1	/* Nexthop is dead (used by multipath)	*/
- #define RTNH_F_PERVASIVE	2	/* Do recursive gateway lookup	*/
- #define RTNH_F_ONLINK		4	/* Gateway is forced on link	*/
-+#define RTNH_F_SUSPECT		8	/* We don't know the real state	*/
-+#define RTNH_F_BADSTATE		(RTNH_F_DEAD | RTNH_F_SUSPECT)
- 
- /* Macros to handle hexthops */
- 
-diff -ur v2.4.29/linux/include/net/ip_fib.h linux/include/net/ip_fib.h
---- v2.4.29/linux/include/net/ip_fib.h	2001-11-13 03:24:05.000000000 +0200
-+++ linux/include/net/ip_fib.h	2005-01-20 09:55:33.432714312 +0200
-@@ -162,7 +162,8 @@
- 
- static inline void fib_select_default(const struct rt_key *key, struct fib_result *res)
- {
--	if (FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK)
-+	if ((FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK) ||
-+	    FIB_RES_NH(*res).nh_scope == RT_SCOPE_HOST)
- 		main_table->tb_select_default(main_table, key, res);
- }
- 
-@@ -174,6 +175,7 @@
- extern int fib_lookup(const struct rt_key *key, struct fib_result *res);
- extern struct fib_table *__fib_new_table(int id);
- extern void fib_rule_put(struct fib_rule *r);
-+extern int fib_result_table(struct fib_result *res);
- 
- static inline struct fib_table *fib_get_table(int id)
- {
-@@ -275,5 +277,6 @@
- #endif
- }
- 
-+extern rwlock_t fib_nhflags_lock;
- 
- #endif  /* _NET_FIB_H */
-diff -ur v2.4.29/linux/include/net/route.h linux/include/net/route.h
---- v2.4.29/linux/include/net/route.h	2003-08-25 22:06:13.000000000 +0300
-+++ linux/include/net/route.h	2005-01-20 09:55:46.999651824 +0200
-@@ -49,6 +49,8 @@
- {
- 	__u32			dst;
- 	__u32			src;
-+	__u32			lsrc;
-+	__u32			gw;
- 	int			iif;
- 	int			oif;
- #ifdef CONFIG_IP_ROUTE_FWMARK
-@@ -128,6 +130,7 @@
- extern void		rt_cache_flush(int how);
- extern int		ip_route_output_key(struct rtable **, const struct rt_key *key);
- extern int		ip_route_input(struct sk_buff*, u32 dst, u32 src, u8 tos, struct net_device *devin);
-+extern int		ip_route_input_lookup(struct sk_buff*, u32 dst, u32 src, u8 tos, struct net_device *devin, u32 lsrc);
- extern unsigned short	ip_rt_frag_needed(struct iphdr *iph, unsigned short new_mtu);
- extern void		ip_rt_update_pmtu(struct dst_entry *dst, unsigned mtu);
- extern void		ip_rt_send_redirect(struct sk_buff *skb);
-@@ -148,6 +151,15 @@
- }
- 
- 
-+static inline int
-+ip_route_output_lookup(struct rtable **rp,
-+		       u32 daddr, u32 saddr, u32 tos, int oif, u32 gw)
-+{
-+	struct rt_key key = { dst:daddr, src:saddr, gw:gw, oif:oif, tos:tos };
-+
-+	return ip_route_output_key(rp, &key);
-+}
-+
- static inline void ip_rt_put(struct rtable * rt)
- {
- 	if (rt)
-diff -ur v2.4.29/linux/net/ipv4/fib_frontend.c linux/net/ipv4/fib_frontend.c
---- v2.4.29/linux/net/ipv4/fib_frontend.c	2003-08-25 22:06:13.000000000 +0300
-+++ linux/net/ipv4/fib_frontend.c	2005-01-20 09:55:46.999651824 +0200
-@@ -54,6 +54,8 @@
- struct fib_table *local_table;
- struct fib_table *main_table;
- 
-+#define FIB_RES_TABLE(r) (RT_TABLE_MAIN)
-+
- #else
- 
- #define RT_TABLE_MIN 1
-@@ -71,6 +73,7 @@
- 	return tb;
- }
- 
-+#define FIB_RES_TABLE(r) (fib_result_table(r))
- 
- #endif /* CONFIG_IP_MULTIPLE_TABLES */
- 
-@@ -209,6 +212,9 @@
- 	struct in_device *in_dev;
- 	struct rt_key key;
- 	struct fib_result res;
-+	int table;
-+	unsigned char prefixlen;
-+	unsigned char scope;
- 	int no_addr, rpf;
- 	int ret;
- 
-@@ -216,6 +222,7 @@
- 	key.src = dst;
- 	key.tos = tos;
- 	key.oif = 0;
-+	key.gw	= 0;
- 	key.iif = oif;
- 	key.scope = RT_SCOPE_UNIVERSE;
- 
-@@ -237,31 +244,35 @@
- 		goto e_inval_res;
- 	*spec_dst = FIB_RES_PREFSRC(res);
- 	fib_combine_itag(itag, &res);
--#ifdef CONFIG_IP_ROUTE_MULTIPATH
--	if (FIB_RES_DEV(res) == dev || res.fi->fib_nhs > 1)
--#else
- 	if (FIB_RES_DEV(res) == dev)
--#endif
- 	{
- 		ret = FIB_RES_NH(res).nh_scope >= RT_SCOPE_HOST;
- 		fib_res_put(&res);
- 		return ret;
- 	}
-+	table = FIB_RES_TABLE(&res);
-+	prefixlen = res.prefixlen;
-+	scope = res.scope;
- 	fib_res_put(&res);
- 	if (no_addr)
- 		goto last_resort;
--	if (rpf)
--		goto e_inval;
- 	key.oif = dev->ifindex;
- 
- 	ret = 0;
- 	if (fib_lookup(&key, &res) == 0) {
--		if (res.type == RTN_UNICAST) {
-+		if (res.type == RTN_UNICAST &&
-+		    ((table == FIB_RES_TABLE(&res) &&
-+		      res.prefixlen >= prefixlen && res.scope >= scope) ||
-+		     !rpf)) {
- 			*spec_dst = FIB_RES_PREFSRC(res);
- 			ret = FIB_RES_NH(res).nh_scope >= RT_SCOPE_HOST;
-+			fib_res_put(&res);
-+			return ret;
- 		}
- 		fib_res_put(&res);
- 	}
-+	if (rpf)
-+		goto e_inval;
- 	return ret;
- 
- last_resort:
-@@ -579,9 +590,7 @@
- 	switch (event) {
- 	case NETDEV_UP:
- 		fib_add_ifaddr(ifa);
--#ifdef CONFIG_IP_ROUTE_MULTIPATH
- 		fib_sync_up(ifa->ifa_dev->dev);
--#endif
- 		rt_cache_flush(-1);
- 		break;
- 	case NETDEV_DOWN:
-@@ -617,9 +626,7 @@
- 		for_ifa(in_dev) {
- 			fib_add_ifaddr(ifa);
- 		} endfor_ifa(in_dev);
--#ifdef CONFIG_IP_ROUTE_MULTIPATH
- 		fib_sync_up(dev);
--#endif
- 		rt_cache_flush(-1);
- 		break;
- 	case NETDEV_DOWN:
-diff -ur v2.4.29/linux/net/ipv4/fib_hash.c linux/net/ipv4/fib_hash.c
---- v2.4.29/linux/net/ipv4/fib_hash.c	2003-08-25 22:06:13.000000000 +0300
-+++ linux/net/ipv4/fib_hash.c	2005-01-20 09:55:47.000651672 +0200
-@@ -71,6 +71,7 @@
- 	struct fib_info		*fn_info;
- #define FIB_INFO(f)	((f)->fn_info)
- 	fn_key_t		fn_key;
-+	int			fn_last_dflt;
- 	u8			fn_tos;
- 	u8			fn_type;
- 	u8			fn_scope;
-@@ -336,72 +337,123 @@
- 	return err;
- }
- 
--static int fn_hash_last_dflt=-1;
--
--static int fib_detect_death(struct fib_info *fi, int order,
--			    struct fib_info **last_resort, int *last_idx)
-+static int fib_detect_death(struct fib_info *fi, int order, int last_dflt,
-+			    struct fib_info **last_resort, int *last_idx,
-+			    int *last_nhsel, const struct rt_key *key)
- {
- 	struct neighbour *n;
--	int state = NUD_NONE;
-+	int nhsel;
-+	int state;
-+	struct fib_nh * nh;
-+	u32 dst;
-+	int flag, dead = 1;
-+
-+	/* change_nexthops(fi) { */
-+	for (nhsel = 0, nh = fi->fib_nh; nhsel < fi->fib_nhs; nh++, nhsel++) {
-+		if (key->oif && key->oif != nh->nh_oif)
-+			continue;
-+		if (key->gw && key->gw != nh->nh_gw && nh->nh_gw &&
-+		    nh->nh_scope == RT_SCOPE_LINK)
-+			continue;
-+		if (nh->nh_flags & RTNH_F_DEAD)
-+			continue;
- 
--	n = neigh_lookup(&arp_tbl, &fi->fib_nh[0].nh_gw, fi->fib_dev);
--	if (n) {
--		state = n->nud_state;
--		neigh_release(n);
-+		flag = 0;
-+		if (nh->nh_dev->flags & IFF_NOARP) {
-+			dead = 0;
-+			goto setfl;
-+		}
-+
-+		dst = nh->nh_gw;
-+		if (!nh->nh_gw || nh->nh_scope != RT_SCOPE_LINK)
-+			dst = key->dst;
-+
-+		state = NUD_NONE;
-+		n = neigh_lookup(&arp_tbl, &dst, nh->nh_dev);
-+		if (n) {
-+			state = n->nud_state;
-+			neigh_release(n);
-+		}
-+		if (state==NUD_REACHABLE ||
-+			((state&NUD_VALID) && order != last_dflt)) {
-+			dead = 0;
-+			goto setfl;
-+		}
-+		if (!(state&NUD_VALID))
-+			flag = 1;
-+		if (!dead)
-+			goto setfl;
-+		if ((state&NUD_VALID) ||
-+		    (*last_idx<0 && order >= last_dflt)) {
-+			*last_resort = fi;
-+			*last_idx = order;
-+			*last_nhsel = nhsel;
-+		}
-+
-+		setfl:
-+
-+		read_lock_bh(&fib_nhflags_lock);
-+		if (flag)
-+			nh->nh_flags |= RTNH_F_SUSPECT;
-+		else
-+			nh->nh_flags &= ~RTNH_F_SUSPECT;
-+		read_unlock_bh(&fib_nhflags_lock);
- 	}
--	if (state==NUD_REACHABLE)
--		return 0;
--	if ((state&NUD_VALID) && order != fn_hash_last_dflt)
--		return 0;
--	if ((state&NUD_VALID) ||
--	    (*last_idx<0 && order > fn_hash_last_dflt)) {
--		*last_resort = fi;
--		*last_idx = order;
--	}
--	return 1;
-+	/* } endfor_nexthops(fi) */
-+
-+	return dead;
- }
- 
- static void
- fn_hash_select_default(struct fib_table *tb, const struct rt_key *key, struct fib_result *res)
- {
--	int order, last_idx;
--	struct fib_node *f;
-+	int order, last_idx, last_dflt, last_nhsel;
-+	struct fib_node *f, *first_node;
- 	struct fib_info *fi = NULL;
- 	struct fib_info *last_resort;
- 	struct fn_hash *t = (struct fn_hash*)tb->tb_data;
--	struct fn_zone *fz = t->fn_zones[0];
-+	struct fn_zone *fz = t->fn_zones[res->prefixlen];
-+	fn_key_t k;
- 
- 	if (fz == NULL)
- 		return;
- 
-+	k = fz_key(key->dst, fz);
-+	last_dflt = -2;
-+	first_node = NULL;
- 	last_idx = -1;
- 	last_resort = NULL;
-+	last_nhsel = 0;
- 	order = -1;
- 
- 	read_lock(&fib_hash_lock);
--	for (f = fz->fz_hash[0]; f; f = f->fn_next) {
-+	for (f = fz_chain(k, fz); f; f = f->fn_next) {
- 		struct fib_info *next_fi = FIB_INFO(f);
- 
--		if ((f->fn_state&FN_S_ZOMBIE) ||
-+		if (!fn_key_eq(k, f->fn_key) ||
-+		    (f->fn_state&FN_S_ZOMBIE) ||
- 		    f->fn_scope != res->scope ||
-+#ifdef CONFIG_IP_ROUTE_TOS
-+		    (f->fn_tos && f->fn_tos != key->tos) ||
-+#endif
- 		    f->fn_type != RTN_UNICAST)
- 			continue;
- 
- 		if (next_fi->fib_priority > res->fi->fib_priority)
- 			break;
--		if (!next_fi->fib_nh[0].nh_gw || next_fi->fib_nh[0].nh_scope != RT_SCOPE_LINK)
--			continue;
- 		f->fn_state |= FN_S_ACCESSED;
- 
--		if (fi == NULL) {
--			if (next_fi != res->fi)
--				break;
--		} else if (!fib_detect_death(fi, order, &last_resort, &last_idx)) {
-+		if (!first_node) {
-+			last_dflt = f->fn_last_dflt;
-+			first_node = f;
-+		}
-+		if (fi && !fib_detect_death(fi, order, last_dflt,
-+				&last_resort, &last_idx, &last_nhsel, key)) {
- 			if (res->fi)
- 				fib_info_put(res->fi);
- 			res->fi = fi;
- 			atomic_inc(&fi->fib_clntref);
--			fn_hash_last_dflt = order;
-+			first_node->fn_last_dflt = order;
- 			goto out;
- 		}
- 		fi = next_fi;
-@@ -409,16 +461,25 @@
- 	}
- 
- 	if (order<=0 || fi==NULL) {
--		fn_hash_last_dflt = -1;
-+		if (fi && fi->fib_nhs > 1 &&
-+		    fib_detect_death(fi, order, last_dflt,
-+			&last_resort, &last_idx, &last_nhsel, key) &&
-+		    last_resort == fi) {
-+			read_lock_bh(&fib_nhflags_lock);
-+			fi->fib_nh[last_nhsel].nh_flags &= ~RTNH_F_SUSPECT;
-+			read_unlock_bh(&fib_nhflags_lock);
-+		}
-+		if (first_node) first_node->fn_last_dflt = -1;
- 		goto out;
- 	}
- 
--	if (!fib_detect_death(fi, order, &last_resort, &last_idx)) {
-+	if (!fib_detect_death(fi, order, last_dflt, &last_resort, &last_idx,
-+			      &last_nhsel, key)) {
- 		if (res->fi)
- 			fib_info_put(res->fi);
- 		res->fi = fi;
- 		atomic_inc(&fi->fib_clntref);
--		fn_hash_last_dflt = order;
-+		first_node->fn_last_dflt = order;
- 		goto out;
- 	}
- 
-@@ -428,8 +489,11 @@
- 		res->fi = last_resort;
- 		if (last_resort)
- 			atomic_inc(&last_resort->fib_clntref);
-+		read_lock_bh(&fib_nhflags_lock);
-+		last_resort->fib_nh[last_nhsel].nh_flags &= ~RTNH_F_SUSPECT;
-+		read_unlock_bh(&fib_nhflags_lock);
-+		first_node->fn_last_dflt = last_idx;
- 	}
--	fn_hash_last_dflt = last_idx;
- out:
- 	read_unlock(&fib_hash_lock);
- }
-@@ -589,6 +653,7 @@
- 
- 	memset(new_f, 0, sizeof(struct fib_node));
- 
-+	new_f->fn_last_dflt = -1;
- 	new_f->fn_key = key;
- #ifdef CONFIG_IP_ROUTE_TOS
- 	new_f->fn_tos = tos;
-diff -ur v2.4.29/linux/net/ipv4/fib_rules.c linux/net/ipv4/fib_rules.c
---- v2.4.29/linux/net/ipv4/fib_rules.c	2004-02-19 00:23:39.000000000 +0200
-+++ linux/net/ipv4/fib_rules.c	2005-01-20 09:55:33.433714160 +0200
-@@ -307,6 +307,11 @@
- 	}
- }
- 
-+int fib_result_table(struct fib_result *res)
-+{
-+	return res->r->r_table;
-+}
-+
- int fib_lookup(const struct rt_key *key, struct fib_result *res)
- {
- 	int err;
-@@ -371,8 +376,10 @@
- 
- void fib_select_default(const struct rt_key *key, struct fib_result *res)
- {
--	if (res->r && res->r->r_action == RTN_UNICAST &&
--	    FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK) {
-+	if (res->r &&
-+	    (res->r->r_action == RTN_UNICAST || res->r->r_action == RTN_NAT) &&
-+	    ((FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK) ||
-+	     FIB_RES_NH(*res).nh_scope == RT_SCOPE_HOST)) {
- 		struct fib_table *tb;
- 		if ((tb = fib_get_table(res->r->r_table)) != NULL)
- 			tb->tb_select_default(tb, key, res);
-diff -ur v2.4.29/linux/net/ipv4/fib_semantics.c linux/net/ipv4/fib_semantics.c
---- v2.4.29/linux/net/ipv4/fib_semantics.c	2003-08-25 22:06:13.000000000 +0300
-+++ linux/net/ipv4/fib_semantics.c	2005-01-20 09:55:47.000651672 +0200
-@@ -48,6 +48,7 @@
- static struct fib_info 	*fib_info_list;
- static rwlock_t fib_info_lock = RW_LOCK_UNLOCKED;
- int fib_info_cnt;
-+rwlock_t fib_nhflags_lock = RW_LOCK_UNLOCKED;
- 
- #define for_fib_info() { struct fib_info *fi; \
- 	for (fi = fib_info_list; fi; fi = fi->fib_next)
-@@ -150,7 +151,7 @@
- #ifdef CONFIG_NET_CLS_ROUTE
- 		    nh->nh_tclassid != onh->nh_tclassid ||
- #endif
--		    ((nh->nh_flags^onh->nh_flags)&~RTNH_F_DEAD))
-+		    ((nh->nh_flags^onh->nh_flags)&~RTNH_F_BADSTATE))
- 			return -1;
- 		onh++;
- 	} endfor_nexthops(fi);
-@@ -166,7 +167,7 @@
- 		    nfi->fib_prefsrc == fi->fib_prefsrc &&
- 		    nfi->fib_priority == fi->fib_priority &&
- 		    memcmp(nfi->fib_metrics, fi->fib_metrics, sizeof(fi->fib_metrics)) == 0 &&
--		    ((nfi->fib_flags^fi->fib_flags)&~RTNH_F_DEAD) == 0 &&
-+		    ((nfi->fib_flags^fi->fib_flags)&~RTNH_F_BADSTATE) == 0 &&
- 		    (nfi->fib_nhs == 0 || nh_comp(fi, nfi) == 0))
- 			return fi;
- 	} endfor_fib_info();
-@@ -365,8 +366,11 @@
- 				return -EINVAL;
- 			if ((dev = __dev_get_by_index(nh->nh_oif)) == NULL)
- 				return -ENODEV;
--			if (!(dev->flags&IFF_UP))
--				return -ENETDOWN;
-+			if (!(dev->flags&IFF_UP)) {
-+				if (fi->fib_protocol != RTPROT_STATIC)
-+					return -ENETDOWN;
-+				nh->nh_flags |= RTNH_F_DEAD;
-+			}
- 			nh->nh_dev = dev;
- 			dev_hold(dev);
- 			nh->nh_scope = RT_SCOPE_LINK;
-@@ -380,23 +384,48 @@
- 		/* It is not necessary, but requires a bit of thinking */
- 		if (key.scope < RT_SCOPE_LINK)
- 			key.scope = RT_SCOPE_LINK;
--		if ((err = fib_lookup(&key, &res)) != 0)
--			return err;
--		err = -EINVAL;
--		if (res.type != RTN_UNICAST && res.type != RTN_LOCAL)
--			goto out;
--		nh->nh_scope = res.scope;
--		nh->nh_oif = FIB_RES_OIF(res);
--		if ((nh->nh_dev = FIB_RES_DEV(res)) == NULL)
--			goto out;
--		dev_hold(nh->nh_dev);
--		err = -ENETDOWN;
--		if (!(nh->nh_dev->flags & IFF_UP))
--			goto out;
--		err = 0;
-+
-+		err = fib_lookup(&key, &res);
-+		if (err) {
-+			struct in_device *in_dev;
-+
-+			if (err != -ENETUNREACH ||
-+			    fi->fib_protocol != RTPROT_STATIC)
-+				return err;
-+
-+			in_dev = inetdev_by_index(nh->nh_oif);
-+			if (in_dev == NULL ||
-+			    in_dev->dev->flags & IFF_UP) {
-+				if (in_dev)
-+					in_dev_put(in_dev);
-+				return err;
-+			}
-+			nh->nh_flags |= RTNH_F_DEAD;
-+			nh->nh_scope = RT_SCOPE_LINK;
-+			nh->nh_dev = in_dev->dev;
-+			dev_hold(nh->nh_dev);
-+			in_dev_put(in_dev);
-+		} else {
-+			err = -EINVAL;
-+			if (res.type != RTN_UNICAST && res.type != RTN_LOCAL)
-+				goto out;
-+			nh->nh_scope = res.scope;
-+			nh->nh_oif = FIB_RES_OIF(res);
-+			if ((nh->nh_dev = FIB_RES_DEV(res)) == NULL)
-+				goto out;
-+			dev_hold(nh->nh_dev);
-+			if (!(nh->nh_dev->flags & IFF_UP)) {
-+				if (fi->fib_protocol != RTPROT_STATIC) {
-+					err = -ENETDOWN;
-+					goto out;
-+				}
-+				nh->nh_flags |= RTNH_F_DEAD;
-+			}
-+			err = 0;
- out:
--		fib_res_put(&res);
--		return err;
-+			fib_res_put(&res);
-+			return err;
-+		}
- 	} else {
- 		struct in_device *in_dev;
- 
-@@ -407,8 +436,11 @@
- 		if (in_dev == NULL)
- 			return -ENODEV;
- 		if (!(in_dev->dev->flags&IFF_UP)) {
--			in_dev_put(in_dev);
--			return -ENETDOWN;
-+			if (fi->fib_protocol != RTPROT_STATIC) {
-+				in_dev_put(in_dev);
-+				return -ENETDOWN;
-+			}
-+			nh->nh_flags |= RTNH_F_DEAD;
- 		}
- 		nh->nh_dev = in_dev->dev;
- 		dev_hold(nh->nh_dev);
-@@ -603,8 +635,12 @@
- 			for_nexthops(fi) {
- 				if (nh->nh_flags&RTNH_F_DEAD)
- 					continue;
--				if (!key->oif || key->oif == nh->nh_oif)
--					break;
-+				if (key->oif && key->oif != nh->nh_oif)
-+					continue;
-+				if (key->gw && key->gw != nh->nh_gw &&
-+				    nh->nh_gw && nh->nh_scope == RT_SCOPE_LINK)
-+					continue;
-+				break;
- 			}
- #ifdef CONFIG_IP_ROUTE_MULTIPATH
- 			if (nhsel < fi->fib_nhs) {
-@@ -870,22 +906,35 @@
- 		if (local && fi->fib_prefsrc == local) {
- 			fi->fib_flags |= RTNH_F_DEAD;
- 			ret++;
--		} else if (dev && fi->fib_nhs) {
-+		} else if (fi->fib_nhs) {
- 			int dead = 0;
- 
- 			change_nexthops(fi) {
--				if (nh->nh_flags&RTNH_F_DEAD)
--					dead++;
--				else if (nh->nh_dev == dev &&
--					 nh->nh_scope != scope) {
--					nh->nh_flags |= RTNH_F_DEAD;
-+				if (nh->nh_flags&RTNH_F_DEAD) {
-+					if (fi->fib_protocol!=RTPROT_STATIC ||
-+					    nh->nh_dev == NULL ||
-+					    !__in_dev_get(nh->nh_dev) ||
-+					    nh->nh_dev->flags&IFF_UP)
-+						dead++;
-+				} else if ((nh->nh_dev == dev && dev &&
-+					    nh->nh_scope != scope) ||
-+					    (local == nh->nh_gw && local &&
-+					     nh->nh_oif)) {
-+					write_lock_bh(&fib_nhflags_lock);
- #ifdef CONFIG_IP_ROUTE_MULTIPATH
--					spin_lock_bh(&fib_multipath_lock);
-+					spin_lock(&fib_multipath_lock);
-+					nh->nh_flags |= RTNH_F_DEAD;
- 					fi->fib_power -= nh->nh_power;
- 					nh->nh_power = 0;
--					spin_unlock_bh(&fib_multipath_lock);
-+					spin_unlock(&fib_multipath_lock);
-+#else
-+					nh->nh_flags |= RTNH_F_DEAD;
- #endif
--					dead++;
-+					write_unlock_bh(&fib_nhflags_lock);
-+					if (fi->fib_protocol!=RTPROT_STATIC ||
-+					    force ||
-+					    (dev && __in_dev_get(dev) == NULL))
-+						dead++;
- 				}
- #ifdef CONFIG_IP_ROUTE_MULTIPATH
- 				if (force > 1 && nh->nh_dev == dev) {
-@@ -903,37 +952,55 @@
- 	return ret;
- }
- 
--#ifdef CONFIG_IP_ROUTE_MULTIPATH
--
- /*
--   Dead device goes up. We wake up dead nexthops.
--   It takes sense only on multipath routes.
-+   Dead device goes up or new address is added. We wake up dead nexthops.
-  */
- 
- int fib_sync_up(struct net_device *dev)
- {
--	int ret = 0;
-+	struct rt_key key;
-+	struct fib_result res;
-+	int ret, rep;
- 
-+repeat:
- 	if (!(dev->flags&IFF_UP))
- 		return 0;
- 
-+	ret = 0;
-+	rep = 0;
- 	for_fib_info() {
- 		int alive = 0;
- 
- 		change_nexthops(fi) {
--			if (!(nh->nh_flags&RTNH_F_DEAD)) {
--				alive++;
-+			if (!(nh->nh_flags&RTNH_F_DEAD))
- 				continue;
--			}
- 			if (nh->nh_dev == NULL || !(nh->nh_dev->flags&IFF_UP))
- 				continue;
- 			if (nh->nh_dev != dev || __in_dev_get(dev) == NULL)
- 				continue;
-+			if (nh->nh_gw && fi->fib_protocol == RTPROT_STATIC) {
-+				memset(&key, 0, sizeof(key));
-+				key.dst = nh->nh_gw;
-+				key.oif = nh->nh_oif;
-+				key.scope = nh->nh_scope;
-+				if (fib_lookup(&key, &res) != 0)
-+					continue;
-+				if (res.type != RTN_UNICAST &&
-+				    res.type != RTN_LOCAL) {
-+					fib_res_put(&res);
-+					continue;
-+				}
-+				nh->nh_scope = res.scope;
-+				fib_res_put(&res);
-+				rep = 1;
-+			}
- 			alive++;
-+#ifdef CONFIG_IP_ROUTE_MULTIPATH
- 			spin_lock_bh(&fib_multipath_lock);
- 			nh->nh_power = 0;
- 			nh->nh_flags &= ~RTNH_F_DEAD;
- 			spin_unlock_bh(&fib_multipath_lock);
-+#endif
- 		} endfor_nexthops(fi)
- 
- 		if (alive > 0) {
-@@ -941,9 +1008,13 @@
- 			ret++;
- 		}
- 	} endfor_fib_info();
-+	if (rep)
-+		goto repeat;
- 	return ret;
- }
- 
-+#ifdef CONFIG_IP_ROUTE_MULTIPATH
-+
- /*
-    The algorithm is suboptimal, but it provides really
-    fair weighted route distribution.
-@@ -952,24 +1023,45 @@
- void fib_select_multipath(const struct rt_key *key, struct fib_result *res)
- {
- 	struct fib_info *fi = res->fi;
--	int w;
-+	int w, alive;
- 
- 	spin_lock_bh(&fib_multipath_lock);
-+	if (key->oif) {
-+		int sel = -1;
-+		w = -1;
-+		change_nexthops(fi) {
-+			if (key->oif != nh->nh_oif)
-+				continue;
-+			if (key->gw && key->gw != nh->nh_gw &&
-+			    nh->nh_gw && nh->nh_scope == RT_SCOPE_LINK)
-+				continue;
-+			if (!(nh->nh_flags&RTNH_F_BADSTATE)) {
-+				if (nh->nh_power > w) {
-+					w = nh->nh_power;
-+					sel = nhsel;
-+				}
-+			}
-+		} endfor_nexthops(fi);
-+		if (sel >= 0) {
-+			spin_unlock_bh(&fib_multipath_lock);
-+			res->nh_sel = sel;
-+			return;
-+		}
-+		goto last_resort;
-+	}
-+
-+repeat:
- 	if (fi->fib_power <= 0) {
- 		int power = 0;
- 		change_nexthops(fi) {
--			if (!(nh->nh_flags&RTNH_F_DEAD)) {
-+			if (!(nh->nh_flags&RTNH_F_BADSTATE)) {
- 				power += nh->nh_weight;
- 				nh->nh_power = nh->nh_weight;
- 			}
- 		} endfor_nexthops(fi);
- 		fi->fib_power = power;
--		if (power <= 0) {
--			spin_unlock_bh(&fib_multipath_lock);
--			/* Race condition: route has just become dead. */
--			res->nh_sel = 0;
--			return;
--		}
-+		if (power <= 0)
-+			goto last_resort;
- 	}
- 
- 
-@@ -979,20 +1071,40 @@
- 
- 	w = jiffies % fi->fib_power;
- 
-+	alive = 0;
- 	change_nexthops(fi) {
--		if (!(nh->nh_flags&RTNH_F_DEAD) && nh->nh_power) {
-+		if (!(nh->nh_flags&RTNH_F_BADSTATE) && nh->nh_power) {
- 			if ((w -= nh->nh_power) <= 0) {
- 				nh->nh_power--;
- 				fi->fib_power--;
--				res->nh_sel = nhsel;
- 				spin_unlock_bh(&fib_multipath_lock);
-+				res->nh_sel = nhsel;
- 				return;
- 			}
-+			alive = 1;
-+		}
-+	} endfor_nexthops(fi);
-+	if (alive) {
-+		fi->fib_power = 0;
-+		goto repeat;
-+	}
-+
-+last_resort:
-+
-+	for_nexthops(fi) {
-+		if (!(nh->nh_flags&RTNH_F_DEAD)) {
-+			if (key->oif && key->oif != nh->nh_oif)
-+				continue;
-+			if (key->gw && key->gw != nh->nh_gw &&
-+			    nh->nh_gw && nh->nh_scope == RT_SCOPE_LINK)
-+				continue;
-+			spin_unlock_bh(&fib_multipath_lock);
-+			res->nh_sel = nhsel;
-+			return;
- 		}
- 	} endfor_nexthops(fi);
- 
- 	/* Race condition: route has just become dead. */
--	res->nh_sel = 0;
- 	spin_unlock_bh(&fib_multipath_lock);
- }
- #endif
-diff -ur v2.4.29/linux/net/ipv4/ip_nat_dumb.c linux/net/ipv4/ip_nat_dumb.c
---- v2.4.29/linux/net/ipv4/ip_nat_dumb.c	2001-11-13 03:25:26.000000000 +0200
-+++ linux/net/ipv4/ip_nat_dumb.c	2005-01-20 09:55:47.001651520 +0200
-@@ -124,6 +124,7 @@
- 					key.dst = ciph->saddr;
- 					key.iif = skb->dev->ifindex;
- 					key.oif = 0;
-+					key.gw	= 0;
- #ifdef CONFIG_IP_ROUTE_TOS
- 					key.tos = RT_TOS(ciph->tos);
- #endif
-diff -ur v2.4.29/linux/net/ipv4/netfilter/ip_fw_compat_masq.c linux/net/ipv4/netfilter/ip_fw_compat_masq.c
---- v2.4.29/linux/net/ipv4/netfilter/ip_fw_compat_masq.c	2005-01-20 09:25:34.000000000 +0200
-+++ linux/net/ipv4/netfilter/ip_fw_compat_masq.c	2005-01-20 09:55:47.001651520 +0200
-@@ -41,6 +41,10 @@
- 	enum ip_conntrack_info ctinfo;
- 	struct ip_conntrack *ct;
- 	unsigned int ret;
-+	struct rtable *rt, *skb_rt;
-+	struct net_device *skb_dev;
-+	__u32 saddr;
-+	int new;
- 
- 	/* Sorry, only ICMP, TCP and UDP. */
- 	if (iph->protocol != IPPROTO_ICMP
-@@ -64,22 +68,28 @@
- 	}
- 
- 	info = &ct->nat.info;
-+	iph = (*pskb)->nh.iph;
-+	saddr = iph->saddr;
-+	new = 0;
- 
- 	WRITE_LOCK(&ip_nat_lock);
- 	/* Setup the masquerade, if not already */
- 	if (!info->initialized) {
- 		u_int32_t newsrc;
--		struct rtable *rt;
- 		struct ip_nat_multi_range range;
- 
-+		skb_rt = (struct rtable *) (*pskb)->dst;
-+		skb_dev = skb_rt->u.dst.dev;
- 		/* Pass 0 instead of saddr, since it's going to be changed
- 		   anyway. */
--		if (ip_route_output(&rt, iph->daddr, 0, 0, 0) != 0) {
-+		if (ip_route_output_lookup(&rt, iph->daddr, 0, RT_TOS(iph->tos),
-+		    skb_dev? skb_dev->ifindex : 0,
-+		    skb_dev? skb_rt->rt_gateway : 0) != 0) {
-+			WRITE_UNLOCK(&ip_nat_lock);
- 			DEBUGP("ipnat_rule_masquerade: Can't reroute.\n");
- 			return NF_DROP;
- 		}
--		newsrc = inet_select_addr(rt->u.dst.dev, rt->rt_gateway,
--					  RT_SCOPE_UNIVERSE);
-+		newsrc = rt->rt_src;
- 		ip_rt_put(rt);
- 		range = ((struct ip_nat_multi_range)
- 			 { 1,
-@@ -92,11 +102,31 @@
- 			WRITE_UNLOCK(&ip_nat_lock);
- 			return ret;
- 		}
-+		new = 1;
- 	} else
- 		DEBUGP("Masquerading already done on this conn.\n");
- 	WRITE_UNLOCK(&ip_nat_lock);
- 
--	return do_bindings(ct, ctinfo, info, NF_IP_POST_ROUTING, pskb);
-+	ret = do_bindings(ct, ctinfo, info, NF_IP_POST_ROUTING, pskb);
-+	if (ret != NF_ACCEPT || saddr == (*pskb)->nh.iph->saddr || new)
-+		return ret;
-+
-+	iph = (*pskb)->nh.iph;
-+	if (ip_route_output(&rt, iph->daddr, iph->saddr, RT_TOS(iph->tos), 0) != 0)
-+		return NF_DROP;
-+	
-+	skb_rt = (struct rtable *) (*pskb)->dst;
-+	skb_dev = skb_rt->u.dst.dev;
-+	if (skb_dev != rt->u.dst.dev || rt->rt_gateway != skb_rt->rt_gateway) {
-+		if (skb_dev != rt->u.dst.dev) {
-+			/* TODO: check the new mtu and reply FRAG_NEEDED */
-+		}
-+		dst_release((*pskb)->dst);
-+		(*pskb)->dst = &rt->u.dst;
-+	} else {
-+		ip_rt_put(rt);
-+	}
-+	return NF_ACCEPT;
- }
- 
- void
-diff -ur v2.4.29/linux/net/ipv4/netfilter/ip_nat_core.c linux/net/ipv4/netfilter/ip_nat_core.c
---- v2.4.29/linux/net/ipv4/netfilter/ip_nat_core.c	2005-01-20 09:25:34.000000000 +0200
-+++ linux/net/ipv4/netfilter/ip_nat_core.c	2005-01-20 09:55:47.002651368 +0200
-@@ -994,6 +994,60 @@
- 	return NF_ACCEPT;
- }
- 
-+unsigned int
-+ip_nat_route_input(unsigned int hooknum,
-+		struct sk_buff **pskb,
-+		const struct net_device *in,
-+		const struct net_device *out,
-+		int (*okfn)(struct sk_buff *))
-+{
-+	struct sk_buff *skb = *pskb;
-+	struct iphdr *iph;
-+	struct ip_conntrack *ct;
-+	enum ip_conntrack_info ctinfo;
-+	struct ip_nat_info *info;
-+	enum ip_conntrack_dir dir;
-+	__u32 saddr;
-+	int i;
-+
-+	if (!(ct = ip_conntrack_get(skb, &ctinfo)))
-+		return NF_ACCEPT;
-+
-+	info = &ct->nat.info;
-+	if (!info->initialized)
-+		return NF_ACCEPT;
-+
-+	if (skb->dst)
-+		return NF_ACCEPT;
-+
-+	if (skb->len < sizeof(struct iphdr))
-+		return NF_ACCEPT;
-+
-+	iph = skb->nh.iph;
-+	saddr = iph->saddr;
-+	hooknum = NF_IP_POST_ROUTING;
-+	dir = CTINFO2DIR(ctinfo);
-+
-+	READ_LOCK(&ip_nat_lock);
-+	for (i = 0; i < info->num_manips; i++) {
-+		if (info->manips[i].direction == dir
-+		    && info->manips[i].hooknum == hooknum
-+		    && info->manips[i].maniptype == IP_NAT_MANIP_SRC) {
-+			saddr = info->manips[i].manip.ip;
-+		}
-+	}
-+	READ_UNLOCK(&ip_nat_lock);
-+
-+	if (saddr == iph->saddr)
-+		return NF_ACCEPT;
-+
-+	if (ip_route_input_lookup(skb, iph->daddr, iph->saddr, iph->tos,
-+	    skb->dev, saddr))
-+		return NF_DROP;
-+
-+	return NF_ACCEPT;
-+}
-+
- int __init ip_nat_init(void)
- {
- 	size_t i;
-diff -ur v2.4.29/linux/net/ipv4/netfilter/ip_nat_standalone.c linux/net/ipv4/netfilter/ip_nat_standalone.c
---- v2.4.29/linux/net/ipv4/netfilter/ip_nat_standalone.c	2005-01-20 09:25:34.000000000 +0200
-+++ linux/net/ipv4/netfilter/ip_nat_standalone.c	2005-01-20 09:55:47.002651368 +0200
-@@ -241,6 +241,9 @@
- /* Before packet filtering, change destination */
- static struct nf_hook_ops ip_nat_in_ops
- = { { NULL, NULL }, ip_nat_in, PF_INET, NF_IP_PRE_ROUTING, NF_IP_PRI_NAT_DST };
-+/* Before routing, route before mangling */
-+static struct nf_hook_ops ip_nat_inr_ops
-+= { { NULL, NULL }, ip_nat_route_input, PF_INET, NF_IP_PRE_ROUTING, NF_IP_PRI_LAST-1 };
- /* After packet filtering, change source */
- static struct nf_hook_ops ip_nat_out_ops
- = { { NULL, NULL }, ip_nat_out, PF_INET, NF_IP_POST_ROUTING, NF_IP_PRI_NAT_SRC};
-@@ -309,10 +312,15 @@
- 		printk("ip_nat_init: can't register in hook.\n");
- 		goto cleanup_nat;
- 	}
-+	ret = nf_register_hook(&ip_nat_inr_ops);
-+	if (ret < 0) {
-+		printk("ip_nat_init: can't register inr hook.\n");
-+		goto cleanup_inops;
-+	}
- 	ret = nf_register_hook(&ip_nat_out_ops);
- 	if (ret < 0) {
- 		printk("ip_nat_init: can't register out hook.\n");
--		goto cleanup_inops;
-+		goto cleanup_inrops;
- 	}
- 	ret = nf_register_hook(&ip_nat_local_out_ops);
- 	if (ret < 0) {
-@@ -332,6 +340,8 @@
- 	nf_unregister_hook(&ip_nat_local_out_ops);
-  cleanup_outops:
- 	nf_unregister_hook(&ip_nat_out_ops);
-+ cleanup_inrops:
-+	nf_unregister_hook(&ip_nat_inr_ops);
-  cleanup_inops:
- 	nf_unregister_hook(&ip_nat_in_ops);
-  cleanup_nat:
-diff -ur v2.4.29/linux/net/ipv4/netfilter/ipt_MASQUERADE.c linux/net/ipv4/netfilter/ipt_MASQUERADE.c
---- v2.4.29/linux/net/ipv4/netfilter/ipt_MASQUERADE.c	2005-01-20 09:25:34.000000000 +0200
-+++ linux/net/ipv4/netfilter/ipt_MASQUERADE.c	2005-01-20 09:55:47.003651216 +0200
-@@ -87,7 +87,8 @@
- 	key.dst = (*pskb)->nh.iph->daddr;
- 	key.src = 0; /* Unknown: that's what we're trying to establish */
- 	key.tos = RT_TOS((*pskb)->nh.iph->tos)|RTO_CONN;
--	key.oif = 0;
-+	key.oif = out->ifindex;
-+	key.gw	= ((struct rtable *) (*pskb)->dst)->rt_gateway;
- #ifdef CONFIG_IP_ROUTE_FWMARK
- 	key.fwmark = (*pskb)->nfmark;
- #endif
-@@ -98,13 +99,6 @@
-                                " No route: Rusty's brain broke!\n");
-                 return NF_DROP;
-         }
--        if (rt->u.dst.dev != out) {
--                if (net_ratelimit())
--                        printk("MASQUERADE:"
--                               " Route sent us somewhere else.\n");
--			ip_rt_put(rt);
--		return NF_DROP;
--	}
- 
- 	newsrc = rt->rt_src;
- 	DEBUGP("newsrc = %u.%u.%u.%u\n", NIPQUAD(newsrc));
-diff -ur v2.4.29/linux/net/ipv4/route.c linux/net/ipv4/route.c
---- v2.4.29/linux/net/ipv4/route.c	2004-11-18 08:30:33.000000000 +0200
-+++ linux/net/ipv4/route.c	2005-01-20 09:55:47.004651064 +0200
-@@ -919,6 +919,7 @@
- 
- 				/* Gateway is different ... */
- 				rt->rt_gateway		= new_gw;
-+				if (rt->key.gw) rt->key.gw = new_gw;
- 
- 				/* Redirect received -> path was valid */
- 				dst_confirm(&rth->u.dst);
-@@ -1343,6 +1344,7 @@
- 	rth->key.fwmark	= skb->nfmark;
- #endif
- 	rth->key.src	= saddr;
-+	rth->key.lsrc	= 0;
- 	rth->rt_src	= saddr;
- #ifdef CONFIG_IP_ROUTE_NAT
- 	rth->rt_dst_map	= daddr;
-@@ -1356,6 +1358,7 @@
- 	rth->u.dst.dev	= &loopback_dev;
- 	dev_hold(rth->u.dst.dev);
- 	rth->key.oif	= 0;
-+	rth->key.gw	= 0;
- 	rth->rt_gateway	= daddr;
- 	rth->rt_spec_dst= spec_dst;
- 	rth->rt_type	= RTN_MULTICAST;
-@@ -1395,7 +1398,7 @@
-  */
- 
- int ip_route_input_slow(struct sk_buff *skb, u32 daddr, u32 saddr,
--			u8 tos, struct net_device *dev)
-+			u8 tos, struct net_device *dev, u32 lsrc)
- {
- 	struct rt_key	key;
- 	struct fib_result res;
-@@ -1415,16 +1418,17 @@
- 		goto out;
- 
- 	key.dst		= daddr;
--	key.src		= saddr;
-+	key.src		= lsrc? : saddr;
- 	key.tos		= tos;
- #ifdef CONFIG_IP_ROUTE_FWMARK
- 	key.fwmark	= skb->nfmark;
- #endif
--	key.iif		= dev->ifindex;
-+	key.iif		= lsrc? loopback_dev.ifindex : dev->ifindex;
- 	key.oif		= 0;
-+	key.gw		= 0;
- 	key.scope	= RT_SCOPE_UNIVERSE;
- 
--	hash = rt_hash_code(daddr, saddr ^ (key.iif << 5), tos);
-+	hash = rt_hash_code(daddr, saddr ^ (dev->ifindex << 5), tos);
- 
- 	/* Check for the most weird martians, which can be not detected
- 	   by fib_lookup.
-@@ -1445,6 +1449,12 @@
- 	if (BADCLASS(daddr) || ZERONET(daddr) || LOOPBACK(daddr))
- 		goto martian_destination;
- 
-+	if (lsrc) {
-+		if (MULTICAST(lsrc) || BADCLASS(lsrc) ||
-+		    ZERONET(lsrc) || LOOPBACK(lsrc))
-+			goto e_inval;
-+	}
-+
- 	/*
- 	 *	Now we are ready to route packet.
- 	 */
-@@ -1454,6 +1464,10 @@
- 		goto no_route;
- 	}
- 	free_res = 1;
-+	if (lsrc && res.type != RTN_UNICAST && res.type != RTN_NAT)
-+		goto e_inval;
-+	key.iif = dev->ifindex;
-+	key.src = saddr;
- 
- 	rt_cache_stat[smp_processor_id()].in_slow_tot++;
- 
-@@ -1464,7 +1478,7 @@
- 
- 	if (1) {
- 		u32 src_map = saddr;
--		if (res.r)
-+		if (res.r && !lsrc)
- 			src_map = fib_rules_policy(saddr, &res, &flags);
- 
- 		if (res.type == RTN_NAT) {
-@@ -1503,8 +1517,9 @@
- 	if (res.type != RTN_UNICAST)
- 		goto martian_destination;
- 
-+	fib_select_default(&key, &res);
- #ifdef CONFIG_IP_ROUTE_MULTIPATH
--	if (res.fi->fib_nhs > 1 && key.oif == 0)
-+	if (res.fi->fib_nhs > 1)
- 		fib_select_multipath(&key, &res);
- #endif
- 	out_dev = in_dev_get(FIB_RES_DEV(res));
-@@ -1524,6 +1539,7 @@
- 		flags |= RTCF_DIRECTSRC;
- 
- 	if (out_dev == in_dev && err && !(flags & (RTCF_NAT | RTCF_MASQ)) &&
-+	    !lsrc &&
- 	    (IN_DEV_SHARED_MEDIA(out_dev) ||
- 	     inet_addr_onlink(out_dev, saddr, FIB_RES_GW(res))))
- 		flags |= RTCF_DOREDIRECT;
-@@ -1550,6 +1566,7 @@
- #endif
- 	rth->key.src	= saddr;
- 	rth->rt_src	= saddr;
-+	rth->key.lsrc	= lsrc;
- 	rth->rt_gateway	= daddr;
- #ifdef CONFIG_IP_ROUTE_NAT
- 	rth->rt_src_map	= key.src;
-@@ -1562,6 +1579,7 @@
- 	rth->u.dst.dev	= out_dev->dev;
- 	dev_hold(rth->u.dst.dev);
- 	rth->key.oif 	= 0;
-+	rth->key.gw	= 0;
- 	rth->rt_spec_dst= spec_dst;
- 
- 	rth->u.dst.input = ip_forward;
-@@ -1572,7 +1590,8 @@
- 	rth->rt_flags = flags;
- 
- #ifdef CONFIG_NET_FASTROUTE
--	if (netdev_fastroute && !(flags&(RTCF_NAT|RTCF_MASQ|RTCF_DOREDIRECT))) {
-+	if (netdev_fastroute && !(flags&(RTCF_NAT|RTCF_MASQ|RTCF_DOREDIRECT)) &&
-+	    !lsrc) {
- 		struct net_device *odev = rth->u.dst.dev;
- 		if (odev != dev &&
- 		    dev->accept_fastpath &&
-@@ -1595,6 +1614,8 @@
- brd_input:
- 	if (skb->protocol != htons(ETH_P_IP))
- 		goto e_inval;
-+	if (lsrc)
-+		goto e_inval;
- 
- 	if (ZERONET(saddr))
- 		spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK);
-@@ -1627,6 +1648,7 @@
- #endif
- 	rth->key.src	= saddr;
- 	rth->rt_src	= saddr;
-+	rth->key.lsrc	= 0;
- #ifdef CONFIG_IP_ROUTE_NAT
- 	rth->rt_dst_map	= key.dst;
- 	rth->rt_src_map	= key.src;
-@@ -1639,6 +1661,7 @@
- 	rth->u.dst.dev	= &loopback_dev;
- 	dev_hold(rth->u.dst.dev);
- 	rth->key.oif 	= 0;
-+	rth->key.gw	= 0;
- 	rth->rt_gateway	= daddr;
- 	rth->rt_spec_dst= spec_dst;
- 	rth->u.dst.input= ip_local_deliver;
-@@ -1704,8 +1727,9 @@
- 	goto e_inval;
- }
- 
--int ip_route_input(struct sk_buff *skb, u32 daddr, u32 saddr,
--		   u8 tos, struct net_device *dev)
-+static inline int
-+ip_route_input_cached(struct sk_buff *skb, u32 daddr, u32 saddr,
-+		      u8 tos, struct net_device *dev, u32 lsrc)
- {
- 	struct rtable * rth;
- 	unsigned	hash;
-@@ -1719,6 +1743,7 @@
- 		if (rth->key.dst == daddr &&
- 		    rth->key.src == saddr &&
- 		    rth->key.iif == iif &&
-+		    rth->key.lsrc == lsrc &&
- 		    rth->key.oif == 0 &&
- #ifdef CONFIG_IP_ROUTE_FWMARK
- 		    rth->key.fwmark == skb->nfmark &&
-@@ -1766,9 +1791,21 @@
- 		read_unlock(&inetdev_lock);
- 		return -EINVAL;
- 	}
--	return ip_route_input_slow(skb, daddr, saddr, tos, dev);
-+	return ip_route_input_slow(skb, daddr, saddr, tos, dev, lsrc);
-+}
-+
-+int ip_route_input(struct sk_buff *skb, u32 daddr, u32 saddr,
-+		   u8 tos, struct net_device *dev)
-+{
-+	return ip_route_input_cached(skb, daddr, saddr, tos, dev, 0);
- }
- 
-+int ip_route_input_lookup(struct sk_buff *skb, u32 daddr, u32 saddr,
-+			  u8 tos, struct net_device *dev, u32 lsrc)
-+{
-+	return ip_route_input_cached(skb, daddr, saddr, tos, dev, lsrc);
-+}
-+ 
- /*
-  * Major route resolver routine.
-  */
-@@ -1791,6 +1828,7 @@
- 	key.tos		= tos & IPTOS_RT_MASK;
- 	key.iif		= loopback_dev.ifindex;
- 	key.oif		= oldkey->oif;
-+	key.gw		= oldkey->gw;
- #ifdef CONFIG_IP_ROUTE_FWMARK
- 	key.fwmark	= oldkey->fwmark;
- #endif
-@@ -1880,6 +1918,7 @@
- 		dev_out = &loopback_dev;
- 		dev_hold(dev_out);
- 		key.oif = loopback_dev.ifindex;
-+		key.gw = 0;
- 		res.type = RTN_LOCAL;
- 		flags |= RTCF_LOCAL;
- 		goto make_route;
-@@ -1887,7 +1926,7 @@
- 
- 	if (fib_lookup(&key, &res)) {
- 		res.fi = NULL;
--		if (oldkey->oif) {
-+		if (oldkey->oif && dev_out->flags&IFF_UP) {
- 			/* Apparently, routing tables are wrong. Assume,
- 			   that the destination is on link.
- 
-@@ -1930,6 +1969,7 @@
- 		dev_out = &loopback_dev;
- 		dev_hold(dev_out);
- 		key.oif = dev_out->ifindex;
-+		key.gw = 0;
- 		if (res.fi)
- 			fib_info_put(res.fi);
- 		res.fi = NULL;
-@@ -1937,13 +1977,12 @@
- 		goto make_route;
- 	}
- 
-+	if (res.type == RTN_UNICAST)
-+		fib_select_default(&key, &res);
- #ifdef CONFIG_IP_ROUTE_MULTIPATH
--	if (res.fi->fib_nhs > 1 && key.oif == 0)
-+	if (res.fi->fib_nhs > 1)
- 		fib_select_multipath(&key, &res);
--	else
- #endif
--	if (!res.prefixlen && res.type == RTN_UNICAST && !key.oif)
--		fib_select_default(&key, &res);
- 
- 	if (!key.src)
- 		key.src = FIB_RES_PREFSRC(res);
-@@ -2001,7 +2040,9 @@
- 	rth->key.tos	= tos;
- 	rth->key.src	= oldkey->src;
- 	rth->key.iif	= 0;
-+	rth->key.lsrc	= 0;
- 	rth->key.oif	= oldkey->oif;
-+	rth->key.gw	= oldkey->gw;
- #ifdef CONFIG_IP_ROUTE_FWMARK
- 	rth->key.fwmark	= oldkey->fwmark;
- #endif
-@@ -2080,6 +2121,7 @@
- 		    rth->key.src == key->src &&
- 		    rth->key.iif == 0 &&
- 		    rth->key.oif == key->oif &&
-+		    rth->key.gw == key->gw &&
- #ifdef CONFIG_IP_ROUTE_FWMARK
- 		    rth->key.fwmark == key->fwmark &&
- #endif
-diff -ur v2.4.29/linux/net/netsyms.c linux/net/netsyms.c
---- v2.4.29/linux/net/netsyms.c	2005-01-20 09:25:34.000000000 +0200
-+++ linux/net/netsyms.c	2005-01-20 09:55:47.005650912 +0200
-@@ -260,6 +260,7 @@
- EXPORT_SYMBOL(inet_unregister_protosw);
- EXPORT_SYMBOL(ip_route_output_key);
- EXPORT_SYMBOL(ip_route_input);
-+EXPORT_SYMBOL(ip_route_input_lookup);
- EXPORT_SYMBOL(icmp_send);
- EXPORT_SYMBOL(icmp_statistics);
- EXPORT_SYMBOL(icmp_err_convert);
diff --git a/openwrt/target/linux/generic-2.6/modules.mk b/openwrt/target/linux/generic-2.6/modules.mk
deleted file mode 100644
index b582400bd6..0000000000
--- a/openwrt/target/linux/generic-2.6/modules.mk
+++ /dev/null
@@ -1,357 +0,0 @@
-NF_2_6:=1
-include ../netfilter.mk
-
-# Networking
-
-$(eval $(call KMOD_template,ATM,atm,\
-	$(MODULES_DIR)/kernel/net/atm/atm.ko \
-	$(MODULES_DIR)/kernel/net/atm/br2684.ko \
-	$(MODULES_DIR)/kernel/drivers/atm/atmtcp.ko \
-,CONFIG_ATM,,50,atm))
-
-$(eval $(call KMOD_template,GRE,gre,\
-	$(MODULES_DIR)/kernel/net/ipv4/ip_gre.ko \
-,CONFIG_NET_IPGRE))
-
-$(eval $(call KMOD_template,IMQ,imq,\
-	$(MODULES_DIR)/kernel/net/ipv4/netfilter/*IMQ*.ko \
-	$(MODULES_DIR)/kernel/drivers/net/imq.ko \
-))
-
-$(eval $(call KMOD_template,IPIP,ipip,\
-	$(MODULES_DIR)/kernel/net/ipv4/ipip.ko \
-,CONFIG_NET_IPIP,,60,ipip))
-
-$(eval $(call KMOD_template,IPV6,ipv6,\
-	$(MODULES_DIR)/kernel/net/ipv6/ipv6.ko \
-,CONFIG_IPV6,,20,ipv6))
-
-$(eval $(call KMOD_template,PPP,ppp,\
-	$(MODULES_DIR)/kernel/drivers/net/ppp_async.ko \
-	$(MODULES_DIR)/kernel/drivers/net/ppp_generic.ko \
-	$(MODULES_DIR)/kernel/drivers/net/slhc.ko \
-	$(MODULES_DIR)/kernel/lib/crc-ccitt.ko \
-,CONFIG_PPP))
-
-#$(eval $(call KMOD_template,MPPE,mppe,\
-#	$(MODULES_DIR)/kernel/drivers/net/ppp_mppe_mppc.ko \
-#,CONFIG_PPP_MPPE_MPPC))
-
-$(eval $(call KMOD_template,PPPOATM,pppoatm,\
-	$(MODULES_DIR)/kernel/net/atm/pppoatm.ko \
-,CONFIG_PPPOATM))
-
-$(eval $(call KMOD_template,PPPOE,pppoe,\
-	$(MODULES_DIR)/kernel/drivers/net/pppoe.ko \
-	$(MODULES_DIR)/kernel/drivers/net/pppox.ko \
-,CONFIG_PPPOE))
-
-$(eval $(call KMOD_template,SCHED,sched,\
-	$(MODULES_DIR)/kernel/net/sched/*.ko \
-))
-
-$(eval $(call KMOD_template,TUN,tun,\
-	$(MODULES_DIR)/kernel/drivers/net/tun.ko \
-,CONFIG_TUN,,20,tun))
-
-
-# Filtering / Firewalling
-
-$(eval $(call KMOD_template,ARPTABLES,arptables,\
-	$(MODULES_DIR)/kernel/net/ipv4/netfilter/arp*.ko \
-,CONFIG_IP_NF_ARPTABLES))
-
-$(eval $(call KMOD_template,EBTABLES,ebtables,\
-	$(MODULES_DIR)/kernel/net/bridge/netfilter/*.ko \
-,CONFIG_BRIDGE_NF_EBTABLES))
-
-# metapackage for compatibility ...
-$(eval $(call KMOD_template,IPTABLES_EXTRA,iptables-extra,\
-,,kmod-ipt-conntrack kmod-ipt-extra kmod-ipt-filter kmod-ipt-ipopt kmod-ipt-ipsec kmod-ipt-nat kmod-ipt-nat-extra kmod-ipt-queue kmod-ipt-ulogd))
-
-$(eval $(call KMOD_template,IPT_CONNTRACK,ipt-conntrack,\
-	$(foreach mod,$(IPT_CONNTRACK-m),$(MODULES_DIR)/kernel/net/$(mod).ko) \
-))
-
-$(eval $(call KMOD_template,IPT_EXTRA,ipt-extra,\
-	$(foreach mod,$(IPT_EXTRA-m),$(MODULES_DIR)/kernel/net/$(mod).ko) \
-))
-
-$(eval $(call KMOD_template,IPT_FILTER,ipt-filter,\
-	$(foreach mod,$(IPT_FILTER-m),$(MODULES_DIR)/kernel/net/$(mod).ko) \
-))
-
-$(eval $(call KMOD_template,IPT_IPOPT,ipt-ipopt,\
-	$(foreach mod,$(IPT_IPOPT-m),$(MODULES_DIR)/kernel/net/$(mod).ko) \
-))
-
-$(eval $(call KMOD_template,IPT_IPSEC,ipt-ipsec,\
-	$(foreach mod,$(IPT_IPSEC-m),$(MODULES_DIR)/kernel/net/$(mod).ko) \
-))
-
-$(eval $(call KMOD_template,IPT_NAT,ipt-nat,\
-	$(foreach mod,$(IPT_NAT-m),$(MODULES_DIR)/kernel/net/$(mod).ko) \
-))
-
-$(eval $(call KMOD_template,IPT_NAT_EXTRA,ipt-nat-extra,\
-	$(foreach mod,$(IPT_NAT_EXTRA-m),$(MODULES_DIR)/kernel/net/$(mod).ko) \
-,,,40,$(IPT_NAT_EXTRA-m)))
-
-$(eval $(call KMOD_template,IPT_QUEUE,ipt-queue,\
-	$(foreach mod,$(IPT_QUEUE-m),$(MODULES_DIR)/kernel/net/$(mod).ko) \
-))
-
-$(eval $(call KMOD_template,IPT_ULOG,ipt-ulog,\
-	$(foreach mod,$(IPT_ULOG-m),$(MODULES_DIR)/kernel/net/$(mod).ko) \
-))
-
-$(eval $(call KMOD_template,IP6TABLES,ip6tables,\
-	$(MODULES_DIR)/kernel/net/ipv6/netfilter/ip*.ko \
-,CONFIG_IP6_NF_IPTABLES,kmod-ipv6))
-
-
-# Block devices
-
-$(eval $(call KMOD_template,IDE,ide,\
-	$(MODULES_DIR)/kernel/drivers/ide/*.ko \
-	$(MODULES_DIR)/kernel/drivers/ide/*/*.ko \
-,CONFIG_IDE))
-
-$(eval $(call KMOD_template,LOOP,loop,\
-    $(MODULES_DIR)/kernel/drivers/block/loop.ko \
-,CONFIG_BLK_DEV_LOOP,,20,loop))
-
-$(eval $(call KMOD_template,NBD,nbd,\
-    $(MODULES_DIR)/kernel/drivers/block/nbd.ko \
-,CONFIG_BLK_DEV_NBD,,20,nbd))
-
-
-# Crypto
-
-$(eval $(call KMOD_template,CRYPTO,crypto,\
-	$(MODULES_DIR)/kernel/crypto/*.ko \
-))
-
-
-# Filesystems
-
-$(eval $(call KMOD_template,FS_CIFS,fs-cifs,\
-	$(MODULES_DIR)/kernel/fs/cifs/cifs.ko \
-,CONFIG_CIFS,kmod-nls-base,30,cifs))
-
-$(eval $(call KMOD_template,FS_MINIX,fs-minix,\
-	$(MODULES_DIR)/kernel/fs/minix/minix.ko \
-,CONFIG_MINIX_FS,,30,minix))
-
-$(eval $(call KMOD_template,FS_EXT2,fs-ext2,\
-	$(MODULES_DIR)/kernel/fs/ext2/ext2.ko \
-,CONFIG_EXT2_FS,,30,ext2))
-
-$(eval $(call KMOD_template,FS_EXT3,fs-ext3,\
-	$(MODULES_DIR)/kernel/fs/ext3/ext3.ko \
-	$(MODULES_DIR)/kernel/fs/jbd/jbd.ko \
-,CONFIG_EXT3_FS,,30,jbd ext3))
-
-$(eval $(call KMOD_template,FS_HFSPLUS,fs-hfsplus,\
-	$(MODULES_DIR)/kernel/fs/hfsplus/hfsplus.ko \
-,CONFIG_HFSPLUS_FS,kmod-nls-base,30,hfsplus))
-
-$(eval $(call KMOD_template,FS_NFS,fs-nfs,\
-	$(MODULES_DIR)/kernel/fs/lockd/lockd.ko \
-	$(MODULES_DIR)/kernel/fs/nfs/nfs.ko \
-	$(MODULES_DIR)/kernel/net/sunrpc/sunrpc.ko \
-,CONFIG_NFS_FS,,30,sunrpc lockd nfs))
-
-$(eval $(call KMOD_template,FS_VFAT,fs-vfat,\
-	$(MODULES_DIR)/kernel/fs/fat/fat.ko \
-	$(MODULES_DIR)/kernel/fs/vfat/vfat.ko \
-,CONFIG_VFAT_FS,kmod-nls-base,30,fat vfat))
-
-$(eval $(call KMOD_template,FS_XFS,fs-xfs,\
-	$(MODULES_DIR)/kernel/fs/xfs/xfs.ko \
-,CONFIG_XFS_FS,,30,xfs))
-
-
-# Multimedia
-
-$(eval $(call KMOD_template,PWC,pwc,\
-	$(MODULES_DIR)/kernel/drivers/usb/media/pwc/pwc.ko \
-,CONFIG_USB_PWC,kmod-videodev,63,pwc))
-
-$(eval $(call KMOD_template,SOUNDCORE,soundcore,\
-	$(MODULES_DIR)/kernel/sound/soundcore.ko \
-,CONFIG_SOUND,,30,soundcore))
-
-$(eval $(call KMOD_template,VIDEODEV,videodev,\
-	$(MODULES_DIR)/kernel/drivers/media/video/v4l1-compat.ko \
-	$(MODULES_DIR)/kernel/drivers/media/video/v4l2-common.ko \
-	$(MODULES_DIR)/kernel/drivers/media/video/videodev.ko \
-,CONFIG_VIDEO_DEV,,62,videodev))
-
-
-# NLS
-
-$(eval $(call KMOD_template,NLS_BASE,nls-base,\
-	$(MODULES_DIR)/kernel/fs/nls/nls_base.ko \
-,CONFIG_NLS,,20,nls_base))
-
-$(eval $(call KMOD_template,NLS_CP437,nls-cp437,\
-	$(MODULES_DIR)/kernel/fs/nls/nls_cp437.ko \
-,CONFIG_NLS_CODEPAGE_437,,20,nls_cp437))
-
-$(eval $(call KMOD_template,NLS_CP850,nls-cp850,\
-	$(MODULES_DIR)/kernel/fs/nls/nls_cp850.ko \
-,CONFIG_NLS_CODEPAGE_850,,20,nls_cp850))
-
-$(eval $(call KMOD_template,NLS_ISO8859_1,nls-iso8859-1,\
-	$(MODULES_DIR)/kernel/fs/nls/nls_iso8859-1.ko \
-,CONFIG_NLS_ISO8859_1,,20,nls_iso8859-1))
-
-$(eval $(call KMOD_template,NLS_ISO8859_15,nls-iso8859-15,\
-	$(MODULES_DIR)/kernel/fs/nls/nls_iso8859-15.ko \
-,CONFIG_NLS_ISO8859_15,,20,nls_iso8859-15))
-
-$(eval $(call KMOD_template,NLS_UTF8,nls-utf8,\
-	$(MODULES_DIR)/kernel/fs/nls/nls_utf8.ko \
-,CONFIG_NLS_UTF8,,20,nls_utf8))
-
-
-# Network devices
-
-$(eval $(call KMOD_template,NET_3C59X,net-3c59x,\
-	$(MODULES_DIR)/kernel/drivers/net/3c59x.ko \
-,CONFIG_VORTEX,,10,3c59x))
-
-$(eval $(call KMOD_template,NET_8139TOO,net-8139too,\
-	$(MODULES_DIR)/kernel/drivers/net/8139too.ko \
-,CONFIG_8139TOO,,10,8139too))
-
-$(eval $(call KMOD_template,NET_AIRO,net-airo,\
-	$(MODULES_DIR)/kernel/drivers/net/wireless/airo.ko \
-,CONFIG_AIRO,,10,airo))
-
-$(eval $(call KMOD_template,NET_E100,net-e100,\
-	$(MODULES_DIR)/kernel/drivers/net/e100.ko \
-,CONFIG_E100,,10,e100))
-
-$(eval $(call KMOD_template,NET_HERMES,net-hermes,\
-	$(MODULES_DIR)/kernel/drivers/net/wireless/hermes.ko \
-	$(MODULES_DIR)/kernel/drivers/net/wireless/orinoco.ko \
-,CONFIG_HERMES,,10,hermes orinoco))
-
-$(eval $(call KMOD_template,NET_HERMES_PCI,net-hermes-pci,\
-	$(MODULES_DIR)/kernel/drivers/net/wireless/orinoco_pci.ko \
-,CONFIG_PCI_HERMES,kmod-net-hermes,11,orinoco_pci))
-
-$(eval $(call KMOD_template,NET_HERMES_PCI,net-hermes-plx,\
-	$(MODULES_DIR)/kernel/drivers/net/wireless/orinoco_plx.ko \
-,CONFIG_PLX_HERMES,kmod-net-hermes,11,orinoco_plx))
-
-$(eval $(call KMOD_template,NET_NATSEMI,net-natsemi,\
-	$(MODULES_DIR)/kernel/drivers/net/natsemi.ko \
-,CONFIG_NATSEMI,,10,natsemi))
-
-$(eval $(call KMOD_template,NET_PRISM54,net-prism54,\
-	$(MODULES_DIR)/kernel/drivers/net/wireless/prism54/prism54.ko \
-,CONFIG_PRISM54,,10,prism54))
-
-
-# PCMCIA/CardBus
-
-$(eval $(call KMOD_template,PCMCIA_CORE,pcmcia-core,\
-	$(MODULES_DIR)/kernel/drivers/pcmcia/pcmcia.ko \
-	$(MODULES_DIR)/kernel/drivers/pcmcia/pcmcia_core.ko \
-	$(MODULES_DIR)/kernel/drivers/pcmcia/yenta_socket.ko \
-	$(MODULES_DIR)/kernel/drivers/pcmcia/rsrc_nonstatic.ko \
-,CONFIG_PCMCIA,,50,pcmcia_core pcmcia yenta_socket rsrc_nonstatic))
-
-$(eval $(call KMOD_template,PCMCIA_SERIAL,pcmcia-serial,\
-	$(MODULES_DIR)/kernel/drivers/serial/serial_cs.ko \
-,CONFIG_SERIAL_8250_CS))
-
-
-# USB
-
-$(eval $(call KMOD_template,USB,usb-core,\
-	$(MODULES_DIR)/kernel/drivers/usb/core/usbcore.ko \
-,CONFIG_USB,,50,usbcore))
-
-$(eval $(call KMOD_template,USB_OHCI,usb-ohci,\
-	$(MODULES_DIR)/kernel/drivers/usb/host/ohci-hcd.ko \
-,CONFIG_USB_OHCI_HCD,kmod-usb-core,60,ohci-hcd))
-
-$(eval $(call KMOD_template,USB_UHCI,usb-uhci,\
-	$(MODULES_DIR)/kernel/drivers/usb/host/uhci-hcd.ko \
-,CONFIG_USB_UHCI_HCD,kmod-usb-core,60,uhci-hcd))
-
-$(eval $(call KMOD_template,USB2,usb2,\
-	$(MODULES_DIR)/kernel/drivers/usb/host/ehci-hcd.ko \
-,CONFIG_USB_EHCI_HCD,kmod-usb-core,60,ehci-hcd))
-
-$(eval $(call KMOD_template,USB_ACM,usb-acm,\
-	$(MODULES_DIR)/kernel/drivers/usb/class/cdc-acm.ko \
-,CONFIG_USB_ACM))
-
-$(eval $(call KMOD_template,USB_AUDIO,usb-audio,\
-	$(MODULES_DIR)/kernel/drivers/usb/class/audio.ko \
-,CONFIG_USB_AUDIO,kmod-soundcore kmod-usb-core,61,audio))
-
-$(eval $(call KMOD_template,USB_PRINTER,usb-printer,\
-	$(MODULES_DIR)/kernel/drivers/usb/class/usblp.ko \
-,CONFIG_USB_PRINTER,kmod-usb-core,60,usblp))
-
-$(eval $(call KMOD_template,USB_SERIAL,usb-serial,\
-	$(MODULES_DIR)/kernel/drivers/usb/serial/usbserial.ko \
-,CONFIG_USB_SERIAL,kmod-usb-core,60,usbserial))
-
-$(eval $(call KMOD_template,USB_SERIAL_BELKIN,usb-serial-belkin,\
-	$(MODULES_DIR)/kernel/drivers/usb/serial/belkin_sa.ko \
-,CONFIG_USB_SERIAL_BELKIN,kmod-usb-serial,61,belkin_sa))
-
-$(eval $(call KMOD_template,USB_SERIAL_FTDI,usb-serial-ftdi,\
-	$(MODULES_DIR)/kernel/drivers/usb/serial/ftdi_sio.ko \
-,CONFIG_USB_SERIAL_FTDI_SIO,kmod-usb-serial,61,ftdi_sio))
-
-$(eval $(call KMOD_template,USB_SERIAL_MCT_U232,usb-serial-mct-u232,\
-	$(MODULES_DIR)/kernel/drivers/usb/serial/mct_u232.ko \
-,CONFIG_USB_SERIAL_MCT_U232,kmod-usb-serial,61,mct_u232))
-
-$(eval $(call KMOD_template,USB_SERIAL_PL2303,usb-serial-pl2303,\
-	$(MODULES_DIR)/kernel/drivers/usb/serial/pl2303.ko \
-,CONFIG_USB_SERIAL_PL2303,kmod-usb-serial,61,pl2303))
-
-$(eval $(call KMOD_template,USB_SERIAL_VISOR,usb-serial-visor,\
-	$(MODULES_DIR)/kernel/drivers/usb/serial/visor.ko \
-,CONFIG_USB_SERIAL_VISOR,kmod-usb-serial,61,visor))
-
-$(eval $(call KMOD_template,USB_STORAGE,usb-storage,\
-	$(MODULES_DIR)/kernel/drivers/scsi/scsi_mod.ko \
-	$(MODULES_DIR)/kernel/drivers/scsi/sd_mod.ko \
-	$(MODULES_DIR)/kernel/drivers/usb/storage/usb-storage.ko \
-,CONFIG_USB_STORAGE,kmod-usb-core,60,scsi_mod sd_mod usb-storage))
-
-$(eval $(call KMOD_template,USB_ATM,usb-atm,\
-        $(MODULES_DIR)/kernel/drivers/usb/atm/usbatm.ko \
-	,CONFIG_USB_ATM,kmod-usb-atm,50,usbatm))
-
-$(eval $(call KMOD_template,USB_ATM_SPEEDTOUCH,usb-atm-speedtouch,\
-        $(MODULES_DIR)/kernel/drivers/usb/atm/speedtch.ko \
-	,CONFIG_USB_SPEEDTOUCH,kmod-usb-atm-speedtouch,50,speedtch))
-
-# Misc. devices
-
-$(eval $(call KMOD_template,AX25,ax25,\
-	$(MODULES_DIR)/kernel/net/ax25/ax25.ko \
-	$(MODULES_DIR)/kernel/drivers/net/hamradio/mkiss.ko \
-,CONFIG_AX25,,90,ax25 mkiss))
-
-$(eval $(call KMOD_template,BLUETOOTH,bluetooth,\
-	$(MODULES_DIR)/kernel/net/bluetooth/bluetooth.ko \
-	$(MODULES_DIR)/kernel/net/bluetooth/l2cap.ko \
-	$(MODULES_DIR)/kernel/net/bluetooth/sco.ko \
-	$(MODULES_DIR)/kernel/net/bluetooth/rfcomm/rfcomm.ko \
-	$(MODULES_DIR)/kernel/drivers/bluetooth/hci_uart.ko \
-	$(MODULES_DIR)/kernel/drivers/bluetooth/hci_usb.ko \
-,CONFIG_BT))
-
-
diff --git a/openwrt/target/linux/generic-2.6/patches/000-reenable_devfs.patch b/openwrt/target/linux/generic-2.6/patches/000-reenable_devfs.patch
deleted file mode 100644
index ce98def5da..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/000-reenable_devfs.patch
+++ /dev/null
@@ -1,219 +0,0 @@
-diff -ur linux-2.6.15-rc5/drivers/mtd/mtd_blkdevs.c linux-2.6.15-rc5-openwrt/drivers/mtd/mtd_blkdevs.c
---- linux-2.6.15-rc5/drivers/mtd/mtd_blkdevs.c	2005-12-04 06:10:42.000000000 +0100
-+++ linux-2.6.15-rc5-openwrt/drivers/mtd/mtd_blkdevs.c	2005-12-15 07:53:20.000000000 +0100
-@@ -21,6 +21,9 @@
- #include <linux/init.h>
- #include <asm/semaphore.h>
- #include <asm/uaccess.h>
-+#ifdef CONFIG_DEVFS_FS
-+#include <linux/devfs_fs_kernel.h>
-+#endif
- 
- static LIST_HEAD(blktrans_majors);
- 
-@@ -302,6 +305,11 @@
- 		snprintf(gd->disk_name, sizeof(gd->disk_name),
- 			 "%s%d", tr->name, new->devnum);
- 
-+#ifdef CONFIG_DEVFS_FS
-+		snprintf(gd->devfs_name, sizeof(gd->devfs_name),
-+			 "%s/%c", tr->name, (tr->part_bits?'a':'0') + new->devnum);
-+#endif
-+
- 	/* 2.5 has capacity in units of 512 bytes while still
- 	   having BLOCK_SIZE_BITS set to 10. Just to keep us amused. */
- 	set_capacity(gd, (new->size * new->blksize) >> 9);
-@@ -418,6 +426,10 @@
- 		return ret;
- 	}
- 
-+#ifdef CONFIG_DEVFS_FS
-+	devfs_mk_dir(tr->name);
-+#endif
-+
- 	INIT_LIST_HEAD(&tr->devs);
- 	list_add(&tr->list, &blktrans_majors);
- 
-@@ -450,6 +462,10 @@
- 		tr->remove_dev(dev);
- 	}
- 
-+#ifdef CONFIG_DEVFS_FS
-+	devfs_remove(tr->name);
-+#endif
-+
- 	blk_cleanup_queue(tr->blkcore_priv->rq);
- 	unregister_blkdev(tr->major, tr->name);
- 
-diff -ur linux-2.6.15-rc5/drivers/mtd/mtdchar.c linux-2.6.15-rc5-openwrt/drivers/mtd/mtdchar.c
---- linux-2.6.15-rc5/drivers/mtd/mtdchar.c	2005-12-04 06:10:42.000000000 +0100
-+++ linux-2.6.15-rc5-openwrt/drivers/mtd/mtdchar.c	2005-12-15 07:49:15.000000000 +0100
-@@ -6,7 +6,6 @@
-  */
- 
- #include <linux/config.h>
--#include <linux/device.h>
- #include <linux/fs.h>
- #include <linux/init.h>
- #include <linux/kernel.h>
-@@ -19,19 +18,33 @@
- 
- #include <asm/uaccess.h>
- 
-+#ifdef CONFIG_DEVFS_FS
-+#include <linux/devfs_fs_kernel.h>
-+#else
-+#include <linux/device.h>
-+
- static struct class *mtd_class;
-+#endif
- 
- static void mtd_notify_add(struct mtd_info* mtd)
- {
- 	if (!mtd)
- 		return;
- 
-+#ifdef CONFIG_DEVFS_FS
-+	devfs_mk_cdev(MKDEV(MTD_CHAR_MAJOR, mtd->index*2),
-+			S_IFCHR | S_IRUGO | S_IWUGO, "mtd/%d", mtd->index);
-+
-+	devfs_mk_cdev(MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1),
-+			S_IFCHR | S_IRUGO, "mtd/%dro", mtd->index);
-+#else
- 	class_device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2),
- 			    NULL, "mtd%d", mtd->index);
- 
- 	class_device_create(mtd_class, NULL,
- 			    MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1),
- 			    NULL, "mtd%dro", mtd->index);
-+#endif
- }
- 
- static void mtd_notify_remove(struct mtd_info* mtd)
-@@ -39,8 +52,13 @@
- 	if (!mtd)
- 		return;
- 
-+#ifdef CONFIG_DEVFS_FS
-+	devfs_remove("mtd/%d", mtd->index);
-+	devfs_remove("mtd/%dro", mtd->index);
-+#else
- 	class_device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2));
- 	class_device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1));
-+#endif
- }
- 
- static struct mtd_notifier notifier = {
-@@ -48,6 +66,22 @@
- 	.remove	= mtd_notify_remove,
- };
- 
-+#ifdef CONFIG_DEVFS_FS
-+	static inline void mtdchar_devfs_init(void)
-+	{
-+		devfs_mk_dir("mtd");
-+		register_mtd_user(&notifier);
-+	}
-+	static inline void mtdchar_devfs_exit(void)
-+	{
-+		unregister_mtd_user(&notifier);
-+		devfs_remove("mtd");
-+	}
-+	#else /* !DEVFS */
-+	#define mtdchar_devfs_init() do { } while(0)
-+	#define mtdchar_devfs_exit() do { } while(0)
-+#endif
-+
- /*
-  * We use file->private_data to store a pointer to the MTDdevice.
-  * Since alighment is at least 32 bits, we have 2 bits free for OTP
-@@ -643,6 +677,9 @@
- 		return -EAGAIN;
- 	}
- 
-+#ifdef CONFIG_DEVFS_FS
-+	mtdchar_devfs_init();
-+#else
- 	mtd_class = class_create(THIS_MODULE, "mtd");
- 
- 	if (IS_ERR(mtd_class)) {
-@@ -652,13 +689,19 @@
- 	}
- 
- 	register_mtd_user(&notifier);
-+#endif
- 	return 0;
- }
- 
- static void __exit cleanup_mtdchar(void)
- {
-+
-+#ifdef CONFIG_DEVFS_FS
-+	mtdchar_devfs_exit();
-+#else
- 	unregister_mtd_user(&notifier);
- 	class_destroy(mtd_class);
-+#endif
- 	unregister_chrdev(MTD_CHAR_MAJOR, "mtd");
- }
- 
-diff -ur linux-2.6.15-rc5/fs/Kconfig linux-2.6.15-rc5-openwrt/fs/Kconfig
---- linux-2.6.15-rc5/fs/Kconfig	2005-12-04 06:10:42.000000000 +0100
-+++ linux-2.6.15-rc5-openwrt/fs/Kconfig	2005-12-15 07:44:01.000000000 +0100
-@@ -772,6 +772,56 @@
-         help
-         Exports the dump image of crashed kernel in ELF format.
- 
-+config DEVFS_FS
-+	bool "/dev file system support (OBSOLETE)"
-+	depends on EXPERIMENTAL
-+	help
-+	  This is support for devfs, a virtual file system (like /proc) which
-+	  provides the file system interface to device drivers, normally found
-+	  in /dev. Devfs does not depend on major and minor number
-+	  allocations. Device drivers register entries in /dev which then
-+	  appear automatically, which means that the system administrator does
-+	  not have to create character and block special device files in the
-+	  /dev directory using the mknod command (or MAKEDEV script) anymore.
-+
-+	  This is work in progress. If you want to use this, you *must* read
-+	  the material in <file:Documentation/filesystems/devfs/>, especially
-+	  the file README there.
-+
-+	  Note that devfs no longer manages /dev/pts!  If you are using UNIX98
-+	  ptys, you will also need to mount the /dev/pts filesystem (devpts).
-+
-+	  Note that devfs has been obsoleted by udev,
-+	  <http://www.kernel.org/pub/linux/utils/kernel/hotplug/>.
-+	  It has been stripped down to a bare minimum and is only provided for
-+	  legacy installations that use its naming scheme which is
-+	  unfortunately different from the names normal Linux installations
-+	  use.
-+
-+	  If unsure, say N.
-+
-+config DEVFS_MOUNT
-+	bool "Automatically mount at boot"
-+	depends on DEVFS_FS
-+	help
-+	  This option appears if you have CONFIG_DEVFS_FS enabled. Setting
-+	  this to 'Y' will make the kernel automatically mount devfs onto /dev
-+	  when the system is booted, before the init thread is started.
-+	  You can override this with the "devfs=nomount" boot option.
-+
-+	  If unsure, say N.
-+
-+config DEVFS_DEBUG
-+	bool "Debug devfs"
-+	depends on DEVFS_FS
-+	help
-+	  If you say Y here, then the /dev file system code will generate
-+	  debugging messages. See the file
-+	  <file:Documentation/filesystems/devfs/boot-options> for more
-+	  details.
-+
-+	  If unsure, say N.
-+
- config SYSFS
- 	bool "sysfs file system support" if EMBEDDED
- 	default y
diff --git a/openwrt/target/linux/generic-2.6/patches/001-squashfs.patch b/openwrt/target/linux/generic-2.6/patches/001-squashfs.patch
deleted file mode 100644
index f88dbbae8e..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/001-squashfs.patch
+++ /dev/null
@@ -1,4173 +0,0 @@
-diff --new-file -urp linux-2.6.15/fs/Kconfig linux-2.6.15-squashfs3.0/fs/Kconfig
---- linux-2.6.15/fs/Kconfig	2006-03-01 22:37:27.000000000 +0000
-+++ linux-2.6.15-squashfs3.0/fs/Kconfig	2006-03-07 21:12:37.000000000 +0000
-@@ -1151,6 +1151,71 @@ config CRAMFS
- 
- 	  If unsure, say N.
- 
-+config SQUASHFS
-+	tristate "SquashFS 3.0 - Squashed file system support"
-+	select ZLIB_INFLATE
-+	help
-+	  Saying Y here includes support for SquashFS 3.0 (a Compressed Read-Only File
-+	  System).  Squashfs is a highly compressed read-only filesystem for Linux.
-+	  It uses zlib compression to compress both files, inodes and directories.
-+	  Inodes in the system are very small and all blocks are packed to minimise
-+	  data overhead. Block sizes greater than 4K are supported up to a maximum of 64K.
-+	  SquashFS 3.0 supports 64 bit filesystems and files (larger than 4GB), full
-+	  uid/gid information, hard links and timestamps.
-+
-+	  Squashfs is intended for general read-only filesystem use, for archival
-+	  use (i.e. in cases where a .tar.gz file may be used), and in embedded
-+	  systems where low overhead is needed.  Further information and filesystem tools
-+	  are available from http://squashfs.sourceforge.net.
-+
-+	  If you want to compile this as a module ( = code which can be
-+	  inserted in and removed from the running kernel whenever you want),
-+	  say M here and read <file:Documentation/modules.txt>.  The module
-+	  will be called squashfs.  Note that the root file system (the one
-+	  containing the directory /) cannot be compiled as a module.
-+
-+	  If unsure, say N.
-+
-+config SQUASHFS_EMBEDDED
-+
-+	bool "Additional options for memory-constrained systems" 
-+	depends on SQUASHFS
-+	default n
-+	help
-+	  Saying Y here allows you to specify cache sizes and how Squashfs
-+	  allocates memory.  This is only intended for memory constrained
-+	  systems.
-+
-+	  If unsure, say N.
-+
-+config SQUASHFS_FRAGMENT_CACHE_SIZE
-+	int "Number of fragments cached" if SQUASHFS_EMBEDDED
-+	depends on SQUASHFS
-+	default "3"
-+	help
-+	  By default SquashFS caches the last 3 fragments read from
-+	  the filesystem.  Increasing this amount may mean SquashFS
-+	  has to re-read fragments less often from disk, at the expense
-+	  of extra system memory.  Decreasing this amount will mean
-+	  SquashFS uses less memory at the expense of extra reads from disk.
-+
-+	  Note there must be at least one cached fragment.  Anything
-+	  much more than three will probably not make much difference.
-+
-+config SQUASHFS_VMALLOC
-+	bool "Use Vmalloc rather than Kmalloc" if SQUASHFS_EMBEDDED
-+	depends on SQUASHFS
-+	default n
-+	help
-+	  By default SquashFS uses kmalloc to obtain fragment cache memory.
-+	  Kmalloc memory is the standard kernel allocator, but it can fail
-+	  on memory constrained systems.  Because of the way Vmalloc works,
-+	  Vmalloc can succeed when kmalloc fails.  Specifying this option
-+	  will make SquashFS always use Vmalloc to allocate the
-+	  fragment cache memory.
-+
-+	  If unsure, say N.
-+
- config VXFS_FS
- 	tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
- 	help
-diff --new-file -urp linux-2.6.15/fs/Makefile linux-2.6.15-squashfs3.0/fs/Makefile
---- linux-2.6.15/fs/Makefile	2006-03-01 22:37:27.000000000 +0000
-+++ linux-2.6.15-squashfs3.0/fs/Makefile	2006-03-07 21:12:37.000000000 +0000
-@@ -55,6 +55,7 @@ obj-$(CONFIG_EXT3_FS)		+= ext3/ # Before
- obj-$(CONFIG_JBD)		+= jbd/
- obj-$(CONFIG_EXT2_FS)		+= ext2/
- obj-$(CONFIG_CRAMFS)		+= cramfs/
-+obj-$(CONFIG_SQUASHFS)		+= squashfs/
- obj-$(CONFIG_RAMFS)		+= ramfs/
- obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
- obj-$(CONFIG_CODA_FS)		+= coda/
-diff --new-file -urp linux-2.6.15/fs/squashfs/inode.c linux-2.6.15-squashfs3.0/fs/squashfs/inode.c
---- linux-2.6.15/fs/squashfs/inode.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-squashfs3.0/fs/squashfs/inode.c	2006-03-07 21:12:37.000000000 +0000
-@@ -0,0 +1,2127 @@
-+/*
-+ * Squashfs - a compressed read only filesystem for Linux
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006
-+ * Phillip Lougher <phillip@lougher.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * inode.c
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/squashfs_fs.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/fs.h>
-+#include <linux/smp_lock.h>
-+#include <linux/slab.h>
-+#include <linux/squashfs_fs_sb.h>
-+#include <linux/squashfs_fs_i.h>
-+#include <linux/buffer_head.h>
-+#include <linux/vfs.h>
-+#include <linux/init.h>
-+#include <linux/dcache.h>
-+#include <linux/wait.h>
-+#include <linux/zlib.h>
-+#include <linux/blkdev.h>
-+#include <linux/vmalloc.h>
-+#include <asm/uaccess.h>
-+#include <asm/semaphore.h>
-+
-+#include "squashfs.h"
-+
-+static void squashfs_put_super(struct super_block *);
-+static int squashfs_statfs(struct super_block *, struct kstatfs *);
-+static int squashfs_symlink_readpage(struct file *file, struct page *page);
-+static int squashfs_readpage(struct file *file, struct page *page);
-+static int squashfs_readpage4K(struct file *file, struct page *page);
-+static int squashfs_readdir(struct file *, void *, filldir_t);
-+static struct inode *squashfs_alloc_inode(struct super_block *sb);
-+static void squashfs_destroy_inode(struct inode *inode);
-+static int init_inodecache(void);
-+static void destroy_inodecache(void);
-+static struct dentry *squashfs_lookup(struct inode *, struct dentry *,
-+				struct nameidata *);
-+static struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode);
-+static long long read_blocklist(struct inode *inode, int index,
-+				int readahead_blks, char *block_list,
-+				unsigned short **block_p, unsigned int *bsize);
-+static struct super_block *squashfs_get_sb(struct file_system_type *, int,
-+				const char *, void *);
-+
-+
-+static z_stream stream;
-+
-+static struct file_system_type squashfs_fs_type = {
-+	.owner = THIS_MODULE,
-+	.name = "squashfs",
-+	.get_sb = squashfs_get_sb,
-+	.kill_sb = kill_block_super,
-+	.fs_flags = FS_REQUIRES_DEV
-+};
-+
-+static unsigned char squashfs_filetype_table[] = {
-+	DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK
-+};
-+
-+static struct super_operations squashfs_ops = {
-+	.alloc_inode = squashfs_alloc_inode,
-+	.destroy_inode = squashfs_destroy_inode,
-+	.statfs = squashfs_statfs,
-+	.put_super = squashfs_put_super,
-+};
-+
-+SQSH_EXTERN struct address_space_operations squashfs_symlink_aops = {
-+	.readpage = squashfs_symlink_readpage
-+};
-+
-+SQSH_EXTERN struct address_space_operations squashfs_aops = {
-+	.readpage = squashfs_readpage
-+};
-+
-+SQSH_EXTERN struct address_space_operations squashfs_aops_4K = {
-+	.readpage = squashfs_readpage4K
-+};
-+
-+static struct file_operations squashfs_dir_ops = {
-+	.read = generic_read_dir,
-+	.readdir = squashfs_readdir
-+};
-+
-+SQSH_EXTERN struct inode_operations squashfs_dir_inode_ops = {
-+	.lookup = squashfs_lookup
-+};
-+
-+
-+static struct buffer_head *get_block_length(struct super_block *s,
-+				int *cur_index, int *offset, int *c_byte)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	unsigned short temp;
-+	struct buffer_head *bh;
-+
-+	if (!(bh = sb_bread(s, *cur_index)))
-+		goto out;
-+
-+	if (msblk->devblksize - *offset == 1) {
-+		if (msblk->swap)
-+			((unsigned char *) &temp)[1] = *((unsigned char *)
-+				(bh->b_data + *offset));
-+		else
-+			((unsigned char *) &temp)[0] = *((unsigned char *)
-+				(bh->b_data + *offset));
-+		brelse(bh);
-+		if (!(bh = sb_bread(s, ++(*cur_index))))
-+			goto out;
-+		if (msblk->swap)
-+			((unsigned char *) &temp)[0] = *((unsigned char *)
-+				bh->b_data); 
-+		else
-+			((unsigned char *) &temp)[1] = *((unsigned char *)
-+				bh->b_data); 
-+		*c_byte = temp;
-+		*offset = 1;
-+	} else {
-+		if (msblk->swap) {
-+			((unsigned char *) &temp)[1] = *((unsigned char *)
-+				(bh->b_data + *offset));
-+			((unsigned char *) &temp)[0] = *((unsigned char *)
-+				(bh->b_data + *offset + 1)); 
-+		} else {
-+			((unsigned char *) &temp)[0] = *((unsigned char *)
-+				(bh->b_data + *offset));
-+			((unsigned char *) &temp)[1] = *((unsigned char *)
-+				(bh->b_data + *offset + 1)); 
-+		}
-+		*c_byte = temp;
-+		*offset += 2;
-+	}
-+
-+	if (SQUASHFS_CHECK_DATA(msblk->sblk.flags)) {
-+		if (*offset == msblk->devblksize) {
-+			brelse(bh);
-+			if (!(bh = sb_bread(s, ++(*cur_index))))
-+				goto out;
-+			*offset = 0;
-+		}
-+		if (*((unsigned char *) (bh->b_data + *offset)) !=
-+						SQUASHFS_MARKER_BYTE) {
-+			ERROR("Metadata block marker corrupt @ %x\n",
-+						*cur_index);
-+			brelse(bh);
-+			goto out;
-+		}
-+		(*offset)++;
-+	}
-+	return bh;
-+
-+out:
-+	return NULL;
-+}
-+
-+
-+SQSH_EXTERN unsigned int squashfs_read_data(struct super_block *s, char *buffer,
-+			long long index, unsigned int length,
-+			long long *next_index)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct buffer_head *bh[((SQUASHFS_FILE_MAX_SIZE - 1) >>
-+			msblk->devblksize_log2) + 2];
-+	unsigned int offset = index & ((1 << msblk->devblksize_log2) - 1);
-+	unsigned int cur_index = index >> msblk->devblksize_log2;
-+	int bytes, avail_bytes, b = 0, k;
-+	char *c_buffer;
-+	unsigned int compressed;
-+	unsigned int c_byte = length;
-+
-+	if (c_byte) {
-+		bytes = msblk->devblksize - offset;
-+		compressed = SQUASHFS_COMPRESSED_BLOCK(c_byte);
-+		c_buffer = compressed ? msblk->read_data : buffer;
-+		c_byte = SQUASHFS_COMPRESSED_SIZE_BLOCK(c_byte);
-+
-+		TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed
-+					? "" : "un", (unsigned int) c_byte);
-+
-+		if (!(bh[0] = sb_getblk(s, cur_index)))
-+			goto block_release;
-+
-+		for (b = 1; bytes < c_byte; b++) {
-+			if (!(bh[b] = sb_getblk(s, ++cur_index)))
-+				goto block_release;
-+			bytes += msblk->devblksize;
-+		}
-+		ll_rw_block(READ, b, bh);
-+	} else {
-+		if (!(bh[0] = get_block_length(s, &cur_index, &offset,
-+								&c_byte)))
-+			goto read_failure;
-+
-+		bytes = msblk->devblksize - offset;
-+		compressed = SQUASHFS_COMPRESSED(c_byte);
-+		c_buffer = compressed ? msblk->read_data : buffer;
-+		c_byte = SQUASHFS_COMPRESSED_SIZE(c_byte);
-+
-+		TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed
-+					? "" : "un", (unsigned int) c_byte);
-+
-+		for (b = 1; bytes < c_byte; b++) {
-+			if (!(bh[b] = sb_getblk(s, ++cur_index)))
-+				goto block_release;
-+			bytes += msblk->devblksize;
-+		}
-+		ll_rw_block(READ, b - 1, bh + 1);
-+	}
-+
-+	if (compressed)
-+		down(&msblk->read_data_mutex);
-+
-+	for (bytes = 0, k = 0; k < b; k++) {
-+		avail_bytes = (c_byte - bytes) > (msblk->devblksize - offset) ?
-+					msblk->devblksize - offset :
-+					c_byte - bytes;
-+		wait_on_buffer(bh[k]);
-+		if (!buffer_uptodate(bh[k]))
-+			goto block_release;
-+		memcpy(c_buffer + bytes, bh[k]->b_data + offset, avail_bytes);
-+		bytes += avail_bytes;
-+		offset = 0;
-+		brelse(bh[k]);
-+	}
-+
-+	/*
-+	 * uncompress block
-+	 */
-+	if (compressed) {
-+		int zlib_err;
-+
-+		stream.next_in = c_buffer;
-+		stream.avail_in = c_byte;
-+		stream.next_out = buffer;
-+		stream.avail_out = msblk->read_size;
-+
-+		if (((zlib_err = zlib_inflateInit(&stream)) != Z_OK) ||
-+				((zlib_err = zlib_inflate(&stream, Z_FINISH))
-+				 != Z_STREAM_END) || ((zlib_err =
-+				zlib_inflateEnd(&stream)) != Z_OK)) {
-+			ERROR("zlib_fs returned unexpected result 0x%x\n",
-+				zlib_err);
-+			bytes = 0;
-+		} else
-+			bytes = stream.total_out;
-+		
-+		up(&msblk->read_data_mutex);
-+	}
-+
-+	if (next_index)
-+		*next_index = index + c_byte + (length ? 0 :
-+				(SQUASHFS_CHECK_DATA(msblk->sblk.flags)
-+				 ? 3 : 2));
-+	return bytes;
-+
-+block_release:
-+	while (--b >= 0)
-+		brelse(bh[b]);
-+
-+read_failure:
-+	ERROR("sb_bread failed reading block 0x%x\n", cur_index);
-+	return 0;
-+}
-+
-+
-+SQSH_EXTERN int squashfs_get_cached_block(struct super_block *s, char *buffer,
-+				long long block, unsigned int offset,
-+				int length, long long *next_block,
-+				unsigned int *next_offset)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	int n, i, bytes, return_length = length;
-+	long long next_index;
-+
-+	TRACE("Entered squashfs_get_cached_block [%llx:%x]\n", block, offset);
-+
-+	while ( 1 ) {
-+		for (i = 0; i < SQUASHFS_CACHED_BLKS; i++) 
-+			if (msblk->block_cache[i].block == block)
-+				break; 
-+		
-+		down(&msblk->block_cache_mutex);
-+
-+		if (i == SQUASHFS_CACHED_BLKS) {
-+			/* read inode header block */
-+			for (i = msblk->next_cache, n = SQUASHFS_CACHED_BLKS;
-+					n ; n --, i = (i + 1) %
-+					SQUASHFS_CACHED_BLKS)
-+				if (msblk->block_cache[i].block !=
-+							SQUASHFS_USED_BLK)
-+					break;
-+
-+			if (n == 0) {
-+				wait_queue_t wait;
-+
-+				init_waitqueue_entry(&wait, current);
-+				add_wait_queue(&msblk->waitq, &wait);
-+				set_current_state(TASK_UNINTERRUPTIBLE);
-+ 				up(&msblk->block_cache_mutex);
-+				schedule();
-+				set_current_state(TASK_RUNNING);
-+				remove_wait_queue(&msblk->waitq, &wait);
-+				continue;
-+			}
-+			msblk->next_cache = (i + 1) % SQUASHFS_CACHED_BLKS;
-+
-+			if (msblk->block_cache[i].block ==
-+							SQUASHFS_INVALID_BLK) {
-+				if (!(msblk->block_cache[i].data =
-+						kmalloc(SQUASHFS_METADATA_SIZE,
-+						GFP_KERNEL))) {
-+					ERROR("Failed to allocate cache"
-+							"block\n");
-+					up(&msblk->block_cache_mutex);
-+					goto out;
-+				}
-+			}
-+	
-+			msblk->block_cache[i].block = SQUASHFS_USED_BLK;
-+			up(&msblk->block_cache_mutex);
-+
-+			if (!(msblk->block_cache[i].length =
-+						squashfs_read_data(s,
-+						msblk->block_cache[i].data,
-+						block, 0, &next_index))) {
-+				ERROR("Unable to read cache block [%llx:%x]\n",
-+						block, offset);
-+				goto out;
-+			}
-+
-+			down(&msblk->block_cache_mutex);
-+			wake_up(&msblk->waitq);
-+			msblk->block_cache[i].block = block;
-+			msblk->block_cache[i].next_index = next_index;
-+			TRACE("Read cache block [%llx:%x]\n", block, offset);
-+		}
-+
-+		if (msblk->block_cache[i].block != block) {
-+			up(&msblk->block_cache_mutex);
-+			continue;
-+		}
-+
-+		if ((bytes = msblk->block_cache[i].length - offset) >= length) {
-+			if (buffer)
-+				memcpy(buffer, msblk->block_cache[i].data +
-+						offset, length);
-+			if (msblk->block_cache[i].length - offset == length) {
-+				*next_block = msblk->block_cache[i].next_index;
-+				*next_offset = 0;
-+			} else {
-+				*next_block = block;
-+				*next_offset = offset + length;
-+			}
-+			up(&msblk->block_cache_mutex);
-+			goto finish;
-+		} else {
-+			if (buffer) {
-+				memcpy(buffer, msblk->block_cache[i].data +
-+						offset, bytes);
-+				buffer += bytes;
-+			}
-+			block = msblk->block_cache[i].next_index;
-+			up(&msblk->block_cache_mutex);
-+			length -= bytes;
-+			offset = 0;
-+		}
-+	}
-+
-+finish:
-+	return return_length;
-+out:
-+	return 0;
-+}
-+
-+
-+static int get_fragment_location(struct super_block *s, unsigned int fragment,
-+				long long *fragment_start_block,
-+				unsigned int *fragment_size)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	long long start_block =
-+		msblk->fragment_index[SQUASHFS_FRAGMENT_INDEX(fragment)];
-+	int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment);
-+	struct squashfs_fragment_entry fragment_entry;
-+
-+	if (msblk->swap) {
-+		struct squashfs_fragment_entry sfragment_entry;
-+
-+		if (!squashfs_get_cached_block(s, (char *) &sfragment_entry,
-+					start_block, offset,
-+					sizeof(sfragment_entry), &start_block,
-+					&offset))
-+			goto out;
-+		SQUASHFS_SWAP_FRAGMENT_ENTRY(&fragment_entry, &sfragment_entry);
-+	} else
-+		if (!squashfs_get_cached_block(s, (char *) &fragment_entry,
-+					start_block, offset,
-+					sizeof(fragment_entry), &start_block,
-+					&offset))
-+			goto out;
-+
-+	*fragment_start_block = fragment_entry.start_block;
-+	*fragment_size = fragment_entry.size;
-+
-+	return 1;
-+
-+out:
-+	return 0;
-+}
-+
-+
-+SQSH_EXTERN void release_cached_fragment(struct squashfs_sb_info *msblk, struct
-+					squashfs_fragment_cache *fragment)
-+{
-+	down(&msblk->fragment_mutex);
-+	fragment->locked --;
-+	wake_up(&msblk->fragment_wait_queue);
-+	up(&msblk->fragment_mutex);
-+}
-+
-+
-+SQSH_EXTERN struct squashfs_fragment_cache *get_cached_fragment(struct super_block
-+					*s, long long start_block,
-+					int length)
-+{
-+	int i, n;
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+
-+	while ( 1 ) {
-+		down(&msblk->fragment_mutex);
-+
-+		for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS &&
-+				msblk->fragment[i].block != start_block; i++);
-+
-+		if (i == SQUASHFS_CACHED_FRAGMENTS) {
-+			for (i = msblk->next_fragment, n =
-+				SQUASHFS_CACHED_FRAGMENTS; n &&
-+				msblk->fragment[i].locked; n--, i = (i + 1) %
-+				SQUASHFS_CACHED_FRAGMENTS);
-+
-+			if (n == 0) {
-+				wait_queue_t wait;
-+
-+				init_waitqueue_entry(&wait, current);
-+				add_wait_queue(&msblk->fragment_wait_queue,
-+									&wait);
-+				set_current_state(TASK_UNINTERRUPTIBLE);
-+				up(&msblk->fragment_mutex);
-+				schedule();
-+				set_current_state(TASK_RUNNING);
-+				remove_wait_queue(&msblk->fragment_wait_queue,
-+									&wait);
-+				continue;
-+			}
-+			msblk->next_fragment = (msblk->next_fragment + 1) %
-+				SQUASHFS_CACHED_FRAGMENTS;
-+			
-+			if (msblk->fragment[i].data == NULL)
-+				if (!(msblk->fragment[i].data = SQUASHFS_ALLOC
-+						(SQUASHFS_FILE_MAX_SIZE))) {
-+					ERROR("Failed to allocate fragment "
-+							"cache block\n");
-+					up(&msblk->fragment_mutex);
-+					goto out;
-+				}
-+
-+			msblk->fragment[i].block = SQUASHFS_INVALID_BLK;
-+			msblk->fragment[i].locked = 1;
-+			up(&msblk->fragment_mutex);
-+
-+			if (!(msblk->fragment[i].length = squashfs_read_data(s,
-+						msblk->fragment[i].data,
-+						start_block, length, NULL))) {
-+				ERROR("Unable to read fragment cache block "
-+							"[%llx]\n", start_block);
-+				msblk->fragment[i].locked = 0;
-+				goto out;
-+			}
-+
-+			msblk->fragment[i].block = start_block;
-+			TRACE("New fragment %d, start block %lld, locked %d\n",
-+						i, msblk->fragment[i].block,
-+						msblk->fragment[i].locked);
-+			break;
-+		}
-+
-+		msblk->fragment[i].locked++;
-+		up(&msblk->fragment_mutex);
-+		TRACE("Got fragment %d, start block %lld, locked %d\n", i,
-+						msblk->fragment[i].block,
-+						msblk->fragment[i].locked);
-+		break;
-+	}
-+
-+	return &msblk->fragment[i];
-+
-+out:
-+	return NULL;
-+}
-+
-+
-+static struct inode *squashfs_new_inode(struct super_block *s,
-+		struct squashfs_base_inode_header *inodeb)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct inode *i = new_inode(s);
-+
-+	if (i) {
-+		i->i_ino = inodeb->inode_number;
-+		i->i_mtime.tv_sec = inodeb->mtime;
-+		i->i_atime.tv_sec = inodeb->mtime;
-+		i->i_ctime.tv_sec = inodeb->mtime;
-+		i->i_uid = msblk->uid[inodeb->uid];
-+		i->i_mode = inodeb->mode;
-+		i->i_size = 0;
-+		if (inodeb->guid == SQUASHFS_GUIDS)
-+			i->i_gid = i->i_uid;
-+		else
-+			i->i_gid = msblk->guid[inodeb->guid];
-+	}
-+
-+	return i;
-+}
-+
-+
-+static struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode)
-+{
-+	struct inode *i;
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long block = SQUASHFS_INODE_BLK(inode) +
-+		sblk->inode_table_start;
-+	unsigned int offset = SQUASHFS_INODE_OFFSET(inode);
-+	long long next_block;
-+	unsigned int next_offset;
-+	union squashfs_inode_header id, sid;
-+	struct squashfs_base_inode_header *inodeb = &id.base,
-+					  *sinodeb = &sid.base;
-+
-+	TRACE("Entered squashfs_iget\n");
-+
-+	if (msblk->swap) {
-+		if (!squashfs_get_cached_block(s, (char *) sinodeb, block,
-+					offset, sizeof(*sinodeb), &next_block,
-+					&next_offset))
-+			goto failed_read;
-+		SQUASHFS_SWAP_BASE_INODE_HEADER(inodeb, sinodeb,
-+					sizeof(*sinodeb));
-+	} else
-+		if (!squashfs_get_cached_block(s, (char *) inodeb, block,
-+					offset, sizeof(*inodeb), &next_block,
-+					&next_offset))
-+			goto failed_read;
-+
-+	switch(inodeb->inode_type) {
-+		case SQUASHFS_FILE_TYPE: {
-+			unsigned int frag_size;
-+			long long frag_blk;
-+			struct squashfs_reg_inode_header *inodep = &id.reg;
-+			struct squashfs_reg_inode_header *sinodep = &sid.reg;
-+				
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_REG_INODE_HEADER(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			frag_blk = SQUASHFS_INVALID_BLK;
-+			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
-+					!get_fragment_location(s,
-+					inodep->fragment, &frag_blk, &frag_size))
-+				goto failed_read;
-+				
-+			if((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = 1;
-+			i->i_size = inodep->file_size;
-+			i->i_fop = &generic_ro_fops;
-+			i->i_mode |= S_IFREG;
-+			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
-+			i->i_blksize = PAGE_CACHE_SIZE;
-+			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
-+			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
-+			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+			if (sblk->block_size > 4096)
-+				i->i_data.a_ops = &squashfs_aops;
-+			else
-+				i->i_data.a_ops = &squashfs_aops_4K;
-+
-+			TRACE("File inode %x:%x, start_block %llx, "
-+					"block_list_start %llx, offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, next_block,
-+					next_offset);
-+			break;
-+		}
-+		case SQUASHFS_LREG_TYPE: {
-+			unsigned int frag_size;
-+			long long frag_blk;
-+			struct squashfs_lreg_inode_header *inodep = &id.lreg;
-+			struct squashfs_lreg_inode_header *sinodep = &sid.lreg;
-+				
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_LREG_INODE_HEADER(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			frag_blk = SQUASHFS_INVALID_BLK;
-+			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
-+					!get_fragment_location(s,
-+					inodep->fragment, &frag_blk, &frag_size))
-+				goto failed_read;
-+				
-+			if((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_size = inodep->file_size;
-+			i->i_fop = &generic_ro_fops;
-+			i->i_mode |= S_IFREG;
-+			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
-+			i->i_blksize = PAGE_CACHE_SIZE;
-+			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
-+			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
-+			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+			if (sblk->block_size > 4096)
-+				i->i_data.a_ops = &squashfs_aops;
-+			else
-+				i->i_data.a_ops = &squashfs_aops_4K;
-+
-+			TRACE("File inode %x:%x, start_block %llx, "
-+					"block_list_start %llx, offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, next_block,
-+					next_offset);
-+			break;
-+		}
-+		case SQUASHFS_DIR_TYPE: {
-+			struct squashfs_dir_inode_header *inodep = &id.dir;
-+			struct squashfs_dir_inode_header *sinodep = &sid.dir;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_DIR_INODE_HEADER(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_size = inodep->file_size;
-+			i->i_op = &squashfs_dir_inode_ops;
-+			i->i_fop = &squashfs_dir_ops;
-+			i->i_mode |= S_IFDIR;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->offset = inodep->offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_count = 0;
-+			SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode;
-+
-+			TRACE("Directory inode %x:%x, start_block %x, offset "
-+					"%x\n", SQUASHFS_INODE_BLK(inode),
-+					offset, inodep->start_block,
-+					inodep->offset);
-+			break;
-+		}
-+		case SQUASHFS_LDIR_TYPE: {
-+			struct squashfs_ldir_inode_header *inodep = &id.ldir;
-+			struct squashfs_ldir_inode_header *sinodep = &sid.ldir;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_LDIR_INODE_HEADER(inodep,
-+						sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_size = inodep->file_size;
-+			i->i_op = &squashfs_dir_inode_ops;
-+			i->i_fop = &squashfs_dir_ops;
-+			i->i_mode |= S_IFDIR;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->offset = inodep->offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_start = next_block;
-+			SQUASHFS_I(i)->u.s2.directory_index_offset =
-+								next_offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_count =
-+								inodep->i_count;
-+			SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode;
-+
-+			TRACE("Long directory inode %x:%x, start_block %x, "
-+					"offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, inodep->offset);
-+			break;
-+		}
-+		case SQUASHFS_SYMLINK_TYPE: {
-+			struct squashfs_symlink_inode_header *inodep =
-+								&id.symlink;
-+			struct squashfs_symlink_inode_header *sinodep =
-+								&sid.symlink;
-+	
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_SYMLINK_INODE_HEADER(inodep,
-+								sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_size = inodep->symlink_size;
-+			i->i_op = &page_symlink_inode_operations;
-+			i->i_data.a_ops = &squashfs_symlink_aops;
-+			i->i_mode |= S_IFLNK;
-+			SQUASHFS_I(i)->start_block = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+
-+			TRACE("Symbolic link inode %x:%x, start_block %llx, "
-+					"offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					next_block, next_offset);
-+			break;
-+		 }
-+		 case SQUASHFS_BLKDEV_TYPE:
-+		 case SQUASHFS_CHRDEV_TYPE: {
-+			struct squashfs_dev_inode_header *inodep = &id.dev;
-+			struct squashfs_dev_inode_header *sinodep = &sid.dev;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_DEV_INODE_HEADER(inodep, sinodep);
-+			} else	
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if ((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_mode |= (inodeb->inode_type ==
-+					SQUASHFS_CHRDEV_TYPE) ?  S_IFCHR :
-+					S_IFBLK;
-+			init_special_inode(i, i->i_mode,
-+					old_decode_dev(inodep->rdev));
-+
-+			TRACE("Device inode %x:%x, rdev %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->rdev);
-+			break;
-+		 }
-+		 case SQUASHFS_FIFO_TYPE:
-+		 case SQUASHFS_SOCKET_TYPE: {
-+			struct squashfs_ipc_inode_header *inodep = &id.ipc;
-+			struct squashfs_ipc_inode_header *sinodep = &sid.ipc;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_IPC_INODE_HEADER(inodep, sinodep);
-+			} else	
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if ((i = squashfs_new_inode(s, inodeb)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_nlink = inodep->nlink;
-+			i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE)
-+							? S_IFIFO : S_IFSOCK;
-+			init_special_inode(i, i->i_mode, 0);
-+			break;
-+		 }
-+		 default:
-+			ERROR("Unknown inode type %d in squashfs_iget!\n",
-+					inodeb->inode_type);
-+			goto failed_read1;
-+	}
-+	
-+	insert_inode_hash(i);
-+	return i;
-+
-+failed_read:
-+	ERROR("Unable to read inode [%llx:%x]\n", block, offset);
-+
-+failed_read1:
-+	return NULL;
-+}
-+
-+
-+static int read_fragment_index_table(struct super_block *s)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	/* Allocate fragment index table */
-+	if (!(msblk->fragment_index = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES
-+					(sblk->fragments), GFP_KERNEL))) {
-+		ERROR("Failed to allocate uid/gid table\n");
-+		return 0;
-+	}
-+   
-+	if (SQUASHFS_FRAGMENT_INDEX_BYTES(sblk->fragments) &&
-+					!squashfs_read_data(s, (char *)
-+					msblk->fragment_index,
-+					sblk->fragment_table_start,
-+					SQUASHFS_FRAGMENT_INDEX_BYTES
-+					(sblk->fragments) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
-+		ERROR("unable to read fragment index table\n");
-+		return 0;
-+	}
-+
-+	if (msblk->swap) {
-+		int i;
-+		long long fragment;
-+
-+		for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES(sblk->fragments);
-+									i++) {
-+			SQUASHFS_SWAP_FRAGMENT_INDEXES((&fragment),
-+						&msblk->fragment_index[i], 1);
-+			msblk->fragment_index[i] = fragment;
-+		}
-+	}
-+
-+	return 1;
-+}
-+
-+
-+static int supported_squashfs_filesystem(struct squashfs_sb_info *msblk, int silent)
-+{
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	msblk->iget = squashfs_iget;
-+	msblk->read_blocklist = read_blocklist;
-+	msblk->read_fragment_index_table = read_fragment_index_table;
-+
-+	if (sblk->s_major == 1) {
-+		if (!squashfs_1_0_supported(msblk)) {
-+			SERROR("Major/Minor mismatch, Squashfs 1.0 filesystems "
-+				"are unsupported\n");
-+			SERROR("Please recompile with "
-+				"Squashfs 1.0 support enabled\n");
-+			return 0;
-+		}
-+	} else if (sblk->s_major == 2) {
-+		if (!squashfs_2_0_supported(msblk)) {
-+			SERROR("Major/Minor mismatch, Squashfs 2.0 filesystems "
-+				"are unsupported\n");
-+			SERROR("Please recompile with "
-+				"Squashfs 2.0 support enabled\n");
-+			return 0;
-+		}
-+	} else if(sblk->s_major != SQUASHFS_MAJOR || sblk->s_minor >
-+			SQUASHFS_MINOR) {
-+		SERROR("Major/Minor mismatch, trying to mount newer %d.%d "
-+				"filesystem\n", sblk->s_major, sblk->s_minor);
-+		SERROR("Please update your kernel\n");
-+		return 0;
-+	}
-+
-+	return 1;
-+}
-+
-+
-+static int squashfs_fill_super(struct super_block *s, void *data, int silent)
-+{
-+	struct squashfs_sb_info *msblk;
-+	struct squashfs_super_block *sblk;
-+	int i;
-+	char b[BDEVNAME_SIZE];
-+	struct inode *root;
-+
-+	TRACE("Entered squashfs_read_superblock\n");
-+
-+	if (!(s->s_fs_info = kmalloc(sizeof(struct squashfs_sb_info),
-+						GFP_KERNEL))) {
-+		ERROR("Failed to allocate superblock\n");
-+		goto failure;
-+	}
-+	memset(s->s_fs_info, 0, sizeof(struct squashfs_sb_info));
-+	msblk = s->s_fs_info;
-+	sblk = &msblk->sblk;
-+	
-+	msblk->devblksize = sb_min_blocksize(s, BLOCK_SIZE);
-+	msblk->devblksize_log2 = ffz(~msblk->devblksize);
-+
-+	init_MUTEX(&msblk->read_data_mutex);
-+	init_MUTEX(&msblk->read_page_mutex);
-+	init_MUTEX(&msblk->block_cache_mutex);
-+	init_MUTEX(&msblk->fragment_mutex);
-+	init_MUTEX(&msblk->meta_index_mutex);
-+	
-+	init_waitqueue_head(&msblk->waitq);
-+	init_waitqueue_head(&msblk->fragment_wait_queue);
-+
-+	if (!squashfs_read_data(s, (char *) sblk, SQUASHFS_START,
-+					sizeof(struct squashfs_super_block) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
-+		SERROR("unable to read superblock\n");
-+		goto failed_mount;
-+	}
-+
-+	/* Check it is a SQUASHFS superblock */
-+	msblk->swap = 0;
-+	if ((s->s_magic = sblk->s_magic) != SQUASHFS_MAGIC) {
-+		if (sblk->s_magic == SQUASHFS_MAGIC_SWAP) {
-+			struct squashfs_super_block ssblk;
-+
-+			WARNING("Mounting a different endian SQUASHFS "
-+				"filesystem on %s\n", bdevname(s->s_bdev, b));
-+
-+			SQUASHFS_SWAP_SUPER_BLOCK(&ssblk, sblk);
-+			memcpy(sblk, &ssblk, sizeof(struct squashfs_super_block));
-+			msblk->swap = 1;
-+		} else  {
-+			SERROR("Can't find a SQUASHFS superblock on %s\n",
-+							bdevname(s->s_bdev, b));
-+			goto failed_mount;
-+		}
-+	}
-+
-+	/* Check the MAJOR & MINOR versions */
-+	if(!supported_squashfs_filesystem(msblk, silent))
-+		goto failed_mount;
-+
-+	TRACE("Found valid superblock on %s\n", bdevname(s->s_bdev, b));
-+	TRACE("Inodes are %scompressed\n",
-+					SQUASHFS_UNCOMPRESSED_INODES
-+					(sblk->flags) ? "un" : "");
-+	TRACE("Data is %scompressed\n",
-+					SQUASHFS_UNCOMPRESSED_DATA(sblk->flags)
-+					? "un" : "");
-+	TRACE("Check data is %s present in the filesystem\n",
-+					SQUASHFS_CHECK_DATA(sblk->flags) ?
-+					"" : "not");
-+	TRACE("Filesystem size %lld bytes\n", sblk->bytes_used);
-+	TRACE("Block size %d\n", sblk->block_size);
-+	TRACE("Number of inodes %d\n", sblk->inodes);
-+	if (sblk->s_major > 1)
-+		TRACE("Number of fragments %d\n", sblk->fragments);
-+	TRACE("Number of uids %d\n", sblk->no_uids);
-+	TRACE("Number of gids %d\n", sblk->no_guids);
-+	TRACE("sblk->inode_table_start %llx\n", sblk->inode_table_start);
-+	TRACE("sblk->directory_table_start %llx\n", sblk->directory_table_start);
-+	if (sblk->s_major > 1)
-+		TRACE("sblk->fragment_table_start %llx\n",
-+					sblk->fragment_table_start);
-+	TRACE("sblk->uid_start %llx\n", sblk->uid_start);
-+
-+	s->s_flags |= MS_RDONLY;
-+	s->s_op = &squashfs_ops;
-+
-+	/* Init inode_table block pointer array */
-+	if (!(msblk->block_cache = kmalloc(sizeof(struct squashfs_cache) *
-+					SQUASHFS_CACHED_BLKS, GFP_KERNEL))) {
-+		ERROR("Failed to allocate block cache\n");
-+		goto failed_mount;
-+	}
-+
-+	for (i = 0; i < SQUASHFS_CACHED_BLKS; i++)
-+		msblk->block_cache[i].block = SQUASHFS_INVALID_BLK;
-+
-+	msblk->next_cache = 0;
-+
-+	/* Allocate read_data block */
-+	msblk->read_size = (sblk->block_size < SQUASHFS_METADATA_SIZE) ?
-+					SQUASHFS_METADATA_SIZE :
-+					sblk->block_size;
-+
-+	if (!(msblk->read_data = kmalloc(msblk->read_size, GFP_KERNEL))) {
-+		ERROR("Failed to allocate read_data block\n");
-+		goto failed_mount;
-+	}
-+
-+	/* Allocate read_page block */
-+	if (!(msblk->read_page = kmalloc(sblk->block_size, GFP_KERNEL))) {
-+		ERROR("Failed to allocate read_page block\n");
-+		goto failed_mount;
-+	}
-+
-+	/* Allocate uid and gid tables */
-+	if (!(msblk->uid = kmalloc((sblk->no_uids + sblk->no_guids) *
-+					sizeof(unsigned int), GFP_KERNEL))) {
-+		ERROR("Failed to allocate uid/gid table\n");
-+		goto failed_mount;
-+	}
-+	msblk->guid = msblk->uid + sblk->no_uids;
-+   
-+	if (msblk->swap) {
-+		unsigned int suid[sblk->no_uids + sblk->no_guids];
-+
-+		if (!squashfs_read_data(s, (char *) &suid, sblk->uid_start,
-+					((sblk->no_uids + sblk->no_guids) *
-+					 sizeof(unsigned int)) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
-+			ERROR("unable to read uid/gid table\n");
-+			goto failed_mount;
-+		}
-+
-+		SQUASHFS_SWAP_DATA(msblk->uid, suid, (sblk->no_uids +
-+			sblk->no_guids), (sizeof(unsigned int) * 8));
-+	} else
-+		if (!squashfs_read_data(s, (char *) msblk->uid, sblk->uid_start,
-+					((sblk->no_uids + sblk->no_guids) *
-+					 sizeof(unsigned int)) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
-+			ERROR("unable to read uid/gid table\n");
-+			goto failed_mount;
-+		}
-+
-+
-+	if (sblk->s_major == 1 && squashfs_1_0_supported(msblk))
-+		goto allocate_root;
-+
-+	if (!(msblk->fragment = kmalloc(sizeof(struct squashfs_fragment_cache) *
-+				SQUASHFS_CACHED_FRAGMENTS, GFP_KERNEL))) {
-+		ERROR("Failed to allocate fragment block cache\n");
-+		goto failed_mount;
-+	}
-+
-+	for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) {
-+		msblk->fragment[i].locked = 0;
-+		msblk->fragment[i].block = SQUASHFS_INVALID_BLK;
-+		msblk->fragment[i].data = NULL;
-+	}
-+
-+	msblk->next_fragment = 0;
-+
-+	/* Allocate fragment index table */
-+	if (msblk->read_fragment_index_table(s) == 0)
-+		goto failed_mount;
-+
-+allocate_root:
-+	if ((root = (msblk->iget)(s, sblk->root_inode)) == NULL)
-+		goto failed_mount;
-+
-+	if ((s->s_root = d_alloc_root(root)) == NULL) {
-+		ERROR("Root inode create failed\n");
-+		iput(root);
-+		goto failed_mount;
-+	}
-+
-+	TRACE("Leaving squashfs_read_super\n");
-+	return 0;
-+
-+failed_mount:
-+	kfree(msblk->fragment_index);
-+	kfree(msblk->fragment);
-+	kfree(msblk->uid);
-+	kfree(msblk->read_page);
-+	kfree(msblk->read_data);
-+	kfree(msblk->block_cache);
-+	kfree(msblk->fragment_index_2);
-+	kfree(s->s_fs_info);
-+	s->s_fs_info = NULL;
-+	return -EINVAL;
-+
-+failure:
-+	return -ENOMEM;
-+}
-+
-+
-+static int squashfs_statfs(struct super_block *s, struct kstatfs *buf)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	TRACE("Entered squashfs_statfs\n");
-+
-+	buf->f_type = SQUASHFS_MAGIC;
-+	buf->f_bsize = sblk->block_size;
-+	buf->f_blocks = ((sblk->bytes_used - 1) >> sblk->block_log) + 1;
-+	buf->f_bfree = buf->f_bavail = 0;
-+	buf->f_files = sblk->inodes;
-+	buf->f_ffree = 0;
-+	buf->f_namelen = SQUASHFS_NAME_LEN;
-+
-+	return 0;
-+}
-+
-+
-+static int squashfs_symlink_readpage(struct file *file, struct page *page)
-+{
-+	struct inode *inode = page->mapping->host;
-+	int index = page->index << PAGE_CACHE_SHIFT, length, bytes;
-+	long long block = SQUASHFS_I(inode)->start_block;
-+	int offset = SQUASHFS_I(inode)->offset;
-+	void *pageaddr = kmap(page);
-+
-+	TRACE("Entered squashfs_symlink_readpage, page index %ld, start block "
-+				"%llx, offset %x\n", page->index,
-+				SQUASHFS_I(inode)->start_block,
-+				SQUASHFS_I(inode)->offset);
-+
-+	for (length = 0; length < index; length += bytes) {
-+		if (!(bytes = squashfs_get_cached_block(inode->i_sb, NULL,
-+				block, offset, PAGE_CACHE_SIZE, &block,
-+				&offset))) {
-+			ERROR("Unable to read symbolic link [%llx:%x]\n", block,
-+					offset);
-+			goto skip_read;
-+		}
-+	}
-+
-+	if (length != index) {
-+		ERROR("(squashfs_symlink_readpage) length != index\n");
-+		bytes = 0;
-+		goto skip_read;
-+	}
-+
-+	bytes = (i_size_read(inode) - length) > PAGE_CACHE_SIZE ? PAGE_CACHE_SIZE :
-+					i_size_read(inode) - length;
-+
-+	if (!(bytes = squashfs_get_cached_block(inode->i_sb, pageaddr, block,
-+					offset, bytes, &block, &offset)))
-+		ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset);
-+
-+skip_read:
-+	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
-+	kunmap(page);
-+	SetPageUptodate(page);
-+	unlock_page(page);
-+
-+	return 0;
-+}
-+
-+
-+struct meta_index *locate_meta_index(struct inode *inode, int index, int offset)
-+{
-+	struct meta_index *meta = NULL;
-+	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
-+	int i;
-+
-+	down(&msblk->meta_index_mutex);
-+
-+	TRACE("locate_meta_index: index %d, offset %d\n", index, offset);
-+
-+	if(msblk->meta_index == NULL)
-+		goto not_allocated;
-+
-+	for (i = 0; i < SQUASHFS_META_NUMBER; i ++)
-+		if (msblk->meta_index[i].inode_number == inode->i_ino &&
-+				msblk->meta_index[i].offset >= offset &&
-+				msblk->meta_index[i].offset <= index &&
-+				msblk->meta_index[i].locked == 0) {
-+			TRACE("locate_meta_index: entry %d, offset %d\n", i,
-+					msblk->meta_index[i].offset);
-+			meta = &msblk->meta_index[i];
-+			offset = meta->offset;
-+		}
-+
-+	if (meta)
-+		meta->locked = 1;
-+
-+not_allocated:
-+	up(&msblk->meta_index_mutex);
-+
-+	return meta;
-+}
-+
-+
-+struct meta_index *empty_meta_index(struct inode *inode, int offset, int skip)
-+{
-+	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
-+	struct meta_index *meta = NULL;
-+	int i;
-+
-+	down(&msblk->meta_index_mutex);
-+
-+	TRACE("empty_meta_index: offset %d, skip %d\n", offset, skip);
-+
-+	if(msblk->meta_index == NULL) {
-+		if (!(msblk->meta_index = kmalloc(sizeof(struct meta_index) *
-+					SQUASHFS_META_NUMBER, GFP_KERNEL))) {
-+			ERROR("Failed to allocate meta_index\n");
-+			goto failed;
-+		}
-+		for(i = 0; i < SQUASHFS_META_NUMBER; i++) {
-+			msblk->meta_index[i].inode_number = 0;
-+			msblk->meta_index[i].locked = 0;
-+		}
-+		msblk->next_meta_index = 0;
-+	}
-+
-+	for(i = SQUASHFS_META_NUMBER; i &&
-+			msblk->meta_index[msblk->next_meta_index].locked; i --)
-+		msblk->next_meta_index = (msblk->next_meta_index + 1) %
-+			SQUASHFS_META_NUMBER;
-+
-+	if(i == 0) {
-+		TRACE("empty_meta_index: failed!\n");
-+		goto failed;
-+	}
-+
-+	TRACE("empty_meta_index: returned meta entry %d, %p\n",
-+			msblk->next_meta_index,
-+			&msblk->meta_index[msblk->next_meta_index]);
-+
-+	meta = &msblk->meta_index[msblk->next_meta_index];
-+	msblk->next_meta_index = (msblk->next_meta_index + 1) %
-+			SQUASHFS_META_NUMBER;
-+
-+	meta->inode_number = inode->i_ino;
-+	meta->offset = offset;
-+	meta->skip = skip;
-+	meta->entries = 0;
-+	meta->locked = 1;
-+
-+failed:
-+	up(&msblk->meta_index_mutex);
-+	return meta;
-+}
-+
-+
-+void release_meta_index(struct inode *inode, struct meta_index *meta)
-+{
-+	meta->locked = 0;
-+}
-+
-+
-+static int read_block_index(struct super_block *s, int blocks, char *block_list,
-+		long long *start_block, int *offset)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	unsigned int *block_listp;
-+	int block = 0;
-+	
-+	if (msblk->swap) {
-+		char sblock_list[blocks << 2];
-+
-+		if (!squashfs_get_cached_block(s, sblock_list, *start_block,
-+				*offset, blocks << 2, start_block, offset)) {
-+			ERROR("Unable to read block list [%llx:%x]\n",
-+				*start_block, *offset);
-+			goto failure;
-+		}
-+		SQUASHFS_SWAP_INTS(((unsigned int *)block_list),
-+				((unsigned int *)sblock_list), blocks);
-+	} else
-+		if (!squashfs_get_cached_block(s, block_list, *start_block,
-+				*offset, blocks << 2, start_block, offset)) {
-+			ERROR("Unable to read block list [%llx:%x]\n",
-+				*start_block, *offset);
-+			goto failure;
-+		}
-+
-+	for (block_listp = (unsigned int *) block_list; blocks;
-+				block_listp++, blocks --)
-+		block += SQUASHFS_COMPRESSED_SIZE_BLOCK(*block_listp);
-+
-+	return block;
-+
-+failure:
-+	return -1;
-+}
-+
-+
-+#define SIZE 256
-+
-+static inline int calculate_skip(int blocks) {
-+	int skip = (blocks - 1) / ((SQUASHFS_SLOTS * SQUASHFS_META_ENTRIES + 1) * SQUASHFS_META_INDEXES);
-+	return skip >= 7 ? 7 : skip + 1;
-+}
-+
-+
-+static int get_meta_index(struct inode *inode, int index,
-+		long long *index_block, int *index_offset,
-+		long long *data_block, char *block_list)
-+{
-+	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int skip = calculate_skip(i_size_read(inode) >> sblk->block_log);
-+	int offset = 0;
-+	struct meta_index *meta;
-+	struct meta_entry *meta_entry;
-+	long long cur_index_block = SQUASHFS_I(inode)->u.s1.block_list_start;
-+	int cur_offset = SQUASHFS_I(inode)->offset;
-+	long long cur_data_block = SQUASHFS_I(inode)->start_block;
-+	int i;
-+ 
-+	index /= SQUASHFS_META_INDEXES * skip;
-+
-+	while ( offset < index ) {
-+		meta = locate_meta_index(inode, index, offset + 1);
-+
-+		if (meta == NULL) {
-+			if ((meta = empty_meta_index(inode, offset + 1,
-+							skip)) == NULL)
-+				goto all_done;
-+		} else {
-+			offset = index < meta->offset + meta->entries ? index :
-+				meta->offset + meta->entries - 1;
-+			meta_entry = &meta->meta_entry[offset - meta->offset];
-+			cur_index_block = meta_entry->index_block + sblk->inode_table_start;
-+			cur_offset = meta_entry->offset;
-+			cur_data_block = meta_entry->data_block;
-+			TRACE("get_meta_index: offset %d, meta->offset %d, "
-+				"meta->entries %d\n", offset, meta->offset,
-+				meta->entries);
-+			TRACE("get_meta_index: index_block 0x%llx, offset 0x%x"
-+				" data_block 0x%llx\n", cur_index_block,
-+				cur_offset, cur_data_block);
-+		}
-+
-+		for (i = meta->offset + meta->entries; i <= index &&
-+				i < meta->offset + SQUASHFS_META_ENTRIES; i++) {
-+			int blocks = skip * SQUASHFS_META_INDEXES;
-+
-+			while (blocks) {
-+				int block = blocks > (SIZE >> 2) ? (SIZE >> 2) :
-+					blocks;
-+				int res = read_block_index(inode->i_sb, block,
-+					block_list, &cur_index_block,
-+					&cur_offset);
-+
-+				if (res == -1)
-+					goto failed;
-+
-+				cur_data_block += res;
-+				blocks -= block;
-+			}
-+
-+			meta_entry = &meta->meta_entry[i - meta->offset];
-+			meta_entry->index_block = cur_index_block - sblk->inode_table_start;
-+			meta_entry->offset = cur_offset;
-+			meta_entry->data_block = cur_data_block;
-+			meta->entries ++;
-+			offset ++;
-+		}
-+
-+		TRACE("get_meta_index: meta->offset %d, meta->entries %d\n",
-+				meta->offset, meta->entries);
-+
-+		release_meta_index(inode, meta);
-+	}
-+
-+all_done:
-+	*index_block = cur_index_block;
-+	*index_offset = cur_offset;
-+	*data_block = cur_data_block;
-+
-+	return offset * SQUASHFS_META_INDEXES * skip;
-+
-+failed:
-+	release_meta_index(inode, meta);
-+	return -1;
-+}
-+
-+
-+static long long read_blocklist(struct inode *inode, int index,
-+				int readahead_blks, char *block_list,
-+				unsigned short **block_p, unsigned int *bsize)
-+{
-+	long long block_ptr;
-+	int offset;
-+	long long block;
-+	int res = get_meta_index(inode, index, &block_ptr, &offset, &block,
-+		block_list);
-+
-+	TRACE("read_blocklist: res %d, index %d, block_ptr 0x%llx, offset"
-+		       " 0x%x, block 0x%llx\n", res, index, block_ptr, offset,
-+		       block);
-+
-+	if(res == -1)
-+		goto failure;
-+
-+	index -= res;
-+
-+	while ( index ) {
-+		int blocks = index > (SIZE >> 2) ? (SIZE >> 2) : index;
-+		int res = read_block_index(inode->i_sb, blocks, block_list,
-+			&block_ptr, &offset);
-+		if (res == -1)
-+			goto failure;
-+		block += res;
-+		index -= blocks;
-+	}
-+
-+	if (read_block_index(inode->i_sb, 1, block_list,
-+			&block_ptr, &offset) == -1)
-+		goto failure;
-+	*bsize = *((unsigned int *) block_list);
-+
-+	return block;
-+
-+failure:
-+	return 0;
-+}
-+
-+
-+static int squashfs_readpage(struct file *file, struct page *page)
-+{
-+	struct inode *inode = page->mapping->host;
-+	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	unsigned char block_list[SIZE];
-+	long long block;
-+	unsigned int bsize, i = 0, bytes = 0, byte_offset = 0;
-+	int index = page->index >> (sblk->block_log - PAGE_CACHE_SHIFT);
-+ 	void *pageaddr;
-+	struct squashfs_fragment_cache *fragment = NULL;
-+	char *data_ptr = msblk->read_page;
-+	
-+	int mask = (1 << (sblk->block_log - PAGE_CACHE_SHIFT)) - 1;
-+	int start_index = page->index & ~mask;
-+	int end_index = start_index | mask;
-+
-+	TRACE("Entered squashfs_readpage, page index %lx, start block %llx\n",
-+					page->index,
-+					SQUASHFS_I(inode)->start_block);
-+
-+	if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
-+					PAGE_CACHE_SHIFT))
-+		goto skip_read;
-+
-+	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
-+					|| index < (i_size_read(inode) >>
-+					sblk->block_log)) {
-+		if ((block = (msblk->read_blocklist)(inode, index, 1,
-+					block_list, NULL, &bsize)) == 0)
-+			goto skip_read;
-+
-+		down(&msblk->read_page_mutex);
-+		
-+		if (!(bytes = squashfs_read_data(inode->i_sb, msblk->read_page,
-+					block, bsize, NULL))) {
-+			ERROR("Unable to read page, block %llx, size %x\n", block,
-+					bsize);
-+			up(&msblk->read_page_mutex);
-+			goto skip_read;
-+		}
-+	} else {
-+		if ((fragment = get_cached_fragment(inode->i_sb,
-+					SQUASHFS_I(inode)->
-+					u.s1.fragment_start_block,
-+					SQUASHFS_I(inode)->u.s1.fragment_size))
-+					== NULL) {
-+			ERROR("Unable to read page, block %llx, size %x\n",
-+					SQUASHFS_I(inode)->
-+					u.s1.fragment_start_block,
-+					(int) SQUASHFS_I(inode)->
-+					u.s1.fragment_size);
-+			goto skip_read;
-+		}
-+		bytes = SQUASHFS_I(inode)->u.s1.fragment_offset +
-+					(i_size_read(inode) & (sblk->block_size
-+					- 1));
-+		byte_offset = SQUASHFS_I(inode)->u.s1.fragment_offset;
-+		data_ptr = fragment->data;
-+	}
-+
-+	for (i = start_index; i <= end_index && byte_offset < bytes;
-+					i++, byte_offset += PAGE_CACHE_SIZE) {
-+		struct page *push_page;
-+		int available_bytes = (bytes - byte_offset) > PAGE_CACHE_SIZE ?
-+					PAGE_CACHE_SIZE : bytes - byte_offset;
-+
-+		TRACE("bytes %d, i %d, byte_offset %d, available_bytes %d\n",
-+					bytes, i, byte_offset, available_bytes);
-+
-+		if (i == page->index)  {
-+			pageaddr = kmap_atomic(page, KM_USER0);
-+			memcpy(pageaddr, data_ptr + byte_offset,
-+					available_bytes);
-+			memset(pageaddr + available_bytes, 0,
-+					PAGE_CACHE_SIZE - available_bytes);
-+			kunmap_atomic(pageaddr, KM_USER0);
-+			flush_dcache_page(page);
-+			SetPageUptodate(page);
-+			unlock_page(page);
-+		} else if ((push_page =
-+				grab_cache_page_nowait(page->mapping, i))) {
-+ 			pageaddr = kmap_atomic(push_page, KM_USER0);
-+
-+			memcpy(pageaddr, data_ptr + byte_offset,
-+					available_bytes);
-+			memset(pageaddr + available_bytes, 0,
-+					PAGE_CACHE_SIZE - available_bytes);
-+			kunmap_atomic(pageaddr, KM_USER0);
-+			flush_dcache_page(push_page);
-+			SetPageUptodate(push_page);
-+			unlock_page(push_page);
-+			page_cache_release(push_page);
-+		}
-+	}
-+
-+	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
-+					|| index < (i_size_read(inode) >>
-+					sblk->block_log))
-+		up(&msblk->read_page_mutex);
-+	else
-+		release_cached_fragment(msblk, fragment);
-+
-+	return 0;
-+
-+skip_read:
-+	pageaddr = kmap_atomic(page, KM_USER0);
-+	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
-+	kunmap_atomic(pageaddr, KM_USER0);
-+	flush_dcache_page(page);
-+	SetPageUptodate(page);
-+	unlock_page(page);
-+
-+	return 0;
-+}
-+
-+
-+static int squashfs_readpage4K(struct file *file, struct page *page)
-+{
-+	struct inode *inode = page->mapping->host;
-+	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	unsigned char block_list[SIZE];
-+	long long block;
-+	unsigned int bsize, bytes = 0;
-+ 	void *pageaddr;
-+	
-+	TRACE("Entered squashfs_readpage4K, page index %lx, start block %llx\n",
-+					page->index,
-+					SQUASHFS_I(inode)->start_block);
-+
-+	if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
-+					PAGE_CACHE_SHIFT)) {
-+		pageaddr = kmap_atomic(page, KM_USER0);
-+		goto skip_read;
-+	}
-+
-+	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
-+					|| page->index < (i_size_read(inode) >>
-+					sblk->block_log)) {
-+		block = (msblk->read_blocklist)(inode, page->index, 1,
-+					block_list, NULL, &bsize);
-+
-+		down(&msblk->read_page_mutex);
-+		bytes = squashfs_read_data(inode->i_sb, msblk->read_page, block,
-+					bsize, NULL);
-+		pageaddr = kmap_atomic(page, KM_USER0);
-+		if (bytes)
-+			memcpy(pageaddr, msblk->read_page, bytes);
-+		else
-+			ERROR("Unable to read page, block %llx, size %x\n",
-+					block, bsize);
-+		up(&msblk->read_page_mutex);
-+	} else {
-+		struct squashfs_fragment_cache *fragment =
-+			get_cached_fragment(inode->i_sb,
-+					SQUASHFS_I(inode)->
-+					u.s1.fragment_start_block,
-+					SQUASHFS_I(inode)-> u.s1.fragment_size);
-+		pageaddr = kmap_atomic(page, KM_USER0);
-+		if (fragment) {
-+			bytes = i_size_read(inode) & (sblk->block_size - 1);
-+			memcpy(pageaddr, fragment->data + SQUASHFS_I(inode)->
-+					u.s1.fragment_offset, bytes);
-+			release_cached_fragment(msblk, fragment);
-+		} else
-+			ERROR("Unable to read page, block %llx, size %x\n",
-+					SQUASHFS_I(inode)->
-+					u.s1.fragment_start_block, (int)
-+					SQUASHFS_I(inode)-> u.s1.fragment_size);
-+	}
-+
-+skip_read:
-+	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
-+	kunmap_atomic(pageaddr, KM_USER0);
-+	flush_dcache_page(page);
-+	SetPageUptodate(page);
-+	unlock_page(page);
-+
-+	return 0;
-+}
-+
-+
-+static int get_dir_index_using_offset(struct super_block *s, long long 
-+				*next_block, unsigned int *next_offset,
-+				long long index_start,
-+				unsigned int index_offset, int i_count,
-+				long long f_pos)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i, length = 0;
-+	struct squashfs_dir_index index;
-+
-+	TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n",
-+					i_count, (unsigned int) f_pos);
-+
-+	f_pos =- 3;
-+	if (f_pos == 0)
-+		goto finish;
-+
-+	for (i = 0; i < i_count; i++) {
-+		if (msblk->swap) {
-+			struct squashfs_dir_index sindex;
-+			squashfs_get_cached_block(s, (char *) &sindex,
-+					index_start, index_offset,
-+					sizeof(sindex), &index_start,
-+					&index_offset);
-+			SQUASHFS_SWAP_DIR_INDEX(&index, &sindex);
-+		} else
-+			squashfs_get_cached_block(s, (char *) &index,
-+					index_start, index_offset,
-+					sizeof(index), &index_start,
-+					&index_offset);
-+
-+		if (index.index > f_pos)
-+			break;
-+
-+		squashfs_get_cached_block(s, NULL, index_start, index_offset,
-+					index.size + 1, &index_start,
-+					&index_offset);
-+
-+		length = index.index;
-+		*next_block = index.start_block + sblk->directory_table_start;
-+	}
-+
-+	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
-+
-+finish:
-+	return length + 3;
-+}
-+
-+
-+static int get_dir_index_using_name(struct super_block *s, long long
-+				*next_block, unsigned int *next_offset,
-+				long long index_start,
-+				unsigned int index_offset, int i_count,
-+				const char *name, int size)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i, length = 0;
-+	char buffer[sizeof(struct squashfs_dir_index) + SQUASHFS_NAME_LEN + 1];
-+	struct squashfs_dir_index *index = (struct squashfs_dir_index *) buffer;
-+	char str[SQUASHFS_NAME_LEN + 1];
-+
-+	TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count);
-+
-+	strncpy(str, name, size);
-+	str[size] = '\0';
-+
-+	for (i = 0; i < i_count; i++) {
-+		if (msblk->swap) {
-+			struct squashfs_dir_index sindex;
-+			squashfs_get_cached_block(s, (char *) &sindex,
-+					index_start, index_offset,
-+					sizeof(sindex), &index_start,
-+					&index_offset);
-+			SQUASHFS_SWAP_DIR_INDEX(index, &sindex);
-+		} else
-+			squashfs_get_cached_block(s, (char *) index,
-+					index_start, index_offset,
-+					sizeof(struct squashfs_dir_index),
-+					&index_start, &index_offset);
-+
-+		squashfs_get_cached_block(s, index->name, index_start,
-+					index_offset, index->size + 1,
-+					&index_start, &index_offset);
-+
-+		index->name[index->size + 1] = '\0';
-+
-+		if (strcmp(index->name, str) > 0)
-+			break;
-+
-+		length = index->index;
-+		*next_block = index->start_block + sblk->directory_table_start;
-+	}
-+
-+	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
-+	return length + 3;
-+}
-+
-+		
-+static int squashfs_readdir(struct file *file, void *dirent, filldir_t filldir)
-+{
-+	struct inode *i = file->f_dentry->d_inode;
-+	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long next_block = SQUASHFS_I(i)->start_block +
-+		sblk->directory_table_start;
-+	int next_offset = SQUASHFS_I(i)->offset, length = 0, dirs_read = 0,
-+		dir_count;
-+	struct squashfs_dir_header dirh;
-+	char buffer[sizeof(struct squashfs_dir_entry) + SQUASHFS_NAME_LEN + 1];
-+	struct squashfs_dir_entry *dire = (struct squashfs_dir_entry *) buffer;
-+
-+	TRACE("Entered squashfs_readdir [%llx:%x]\n", next_block, next_offset);
-+
-+	while(file->f_pos < 3) {
-+		char *name;
-+		int size, i_ino;
-+
-+		if(file->f_pos == 0) {
-+			name = ".";
-+			size = 1;
-+			i_ino = i->i_ino;
-+		} else {
-+			name = "..";
-+			size = 2;
-+			i_ino = SQUASHFS_I(i)->u.s2.parent_inode;
-+		}
-+		TRACE("Calling filldir(%x, %s, %d, %d, %d, %d)\n",
-+				(unsigned int) dirent, name, size, (int)
-+				file->f_pos, i_ino,
-+				squashfs_filetype_table[1]);
-+
-+		if (filldir(dirent, name, size,
-+				file->f_pos, i_ino,
-+				squashfs_filetype_table[1]) < 0) {
-+				TRACE("Filldir returned less than 0\n");
-+				goto finish;
-+		}
-+		file->f_pos += size;
-+		dirs_read++;
-+	}
-+
-+	length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_start,
-+				SQUASHFS_I(i)->u.s2.directory_index_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_count,
-+				file->f_pos);
-+
-+	while (length < i_size_read(i)) {
-+		/* read directory header */
-+		if (msblk->swap) {
-+			struct squashfs_dir_header sdirh;
-+			
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
-+					next_block, next_offset, sizeof(sdirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(sdirh);
-+			SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh);
-+		} else {
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
-+					next_block, next_offset, sizeof(dirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(dirh);
-+		}
-+
-+		dir_count = dirh.count + 1;
-+		while (dir_count--) {
-+			if (msblk->swap) {
-+				struct squashfs_dir_entry sdire;
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						&sdire, next_block, next_offset,
-+						sizeof(sdire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				
-+				length += sizeof(sdire);
-+				SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire);
-+			} else {
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						dire, next_block, next_offset,
-+						sizeof(*dire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+				length += sizeof(*dire);
-+			}
-+
-+			if (!squashfs_get_cached_block(i->i_sb, dire->name,
-+						next_block, next_offset,
-+						dire->size + 1, &next_block,
-+						&next_offset))
-+				goto failed_read;
-+
-+			length += dire->size + 1;
-+
-+			if (file->f_pos >= length)
-+				continue;
-+
-+			dire->name[dire->size + 1] = '\0';
-+
-+			TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d, %d)\n",
-+					(unsigned int) dirent, dire->name,
-+					dire->size + 1, (int) file->f_pos,
-+					dirh.start_block, dire->offset,
-+					dirh.inode_number + dire->inode_number,
-+					squashfs_filetype_table[dire->type]);
-+
-+			if (filldir(dirent, dire->name, dire->size + 1,
-+					file->f_pos,
-+					dirh.inode_number + dire->inode_number,
-+					squashfs_filetype_table[dire->type])
-+					< 0) {
-+				TRACE("Filldir returned less than 0\n");
-+				goto finish;
-+			}
-+			file->f_pos = length;
-+			dirs_read++;
-+		}
-+	}
-+
-+finish:
-+	return dirs_read;
-+
-+failed_read:
-+	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
-+		next_offset);
-+	return 0;
-+}
-+
-+
-+static struct dentry *squashfs_lookup(struct inode *i, struct dentry *dentry,
-+				struct nameidata *nd)
-+{
-+	const unsigned char *name = dentry->d_name.name;
-+	int len = dentry->d_name.len;
-+	struct inode *inode = NULL;
-+	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long next_block = SQUASHFS_I(i)->start_block +
-+				sblk->directory_table_start;
-+	int next_offset = SQUASHFS_I(i)->offset, length = 0,
-+				dir_count;
-+	struct squashfs_dir_header dirh;
-+	char buffer[sizeof(struct squashfs_dir_entry) + SQUASHFS_NAME_LEN];
-+	struct squashfs_dir_entry *dire = (struct squashfs_dir_entry *) buffer;
-+
-+	TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset);
-+
-+	if (len > SQUASHFS_NAME_LEN)
-+		goto exit_loop;
-+
-+	length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_start,
-+				SQUASHFS_I(i)->u.s2.directory_index_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_count, name,
-+				len);
-+
-+	while (length < i_size_read(i)) {
-+		/* read directory header */
-+		if (msblk->swap) {
-+			struct squashfs_dir_header sdirh;
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
-+					next_block, next_offset, sizeof(sdirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(sdirh);
-+			SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh);
-+		} else {
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
-+					next_block, next_offset, sizeof(dirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(dirh);
-+		}
-+
-+		dir_count = dirh.count + 1;
-+		while (dir_count--) {
-+			if (msblk->swap) {
-+				struct squashfs_dir_entry sdire;
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						&sdire, next_block,next_offset,
-+						sizeof(sdire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				
-+				length += sizeof(sdire);
-+				SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire);
-+			} else {
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						dire, next_block,next_offset,
-+						sizeof(*dire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+				length += sizeof(*dire);
-+			}
-+
-+			if (!squashfs_get_cached_block(i->i_sb, dire->name,
-+					next_block, next_offset, dire->size + 1,
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += dire->size + 1;
-+
-+			if (name[0] < dire->name[0])
-+				goto exit_loop;
-+
-+			if ((len == dire->size + 1) && !strncmp(name,
-+						dire->name, len)) {
-+				squashfs_inode_t ino =
-+					SQUASHFS_MKINODE(dirh.start_block,
-+					dire->offset);
-+
-+				TRACE("calling squashfs_iget for directory "
-+					"entry %s, inode %x:%x, %d\n", name,
-+					dirh.start_block, dire->offset,
-+					dirh.inode_number + dire->inode_number);
-+
-+				inode = (msblk->iget)(i->i_sb, ino);
-+
-+				goto exit_loop;
-+			}
-+		}
-+	}
-+
-+exit_loop:
-+	d_add(dentry, inode);
-+	return ERR_PTR(0);
-+
-+failed_read:
-+	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
-+		next_offset);
-+	goto exit_loop;
-+}
-+
-+
-+static void squashfs_put_super(struct super_block *s)
-+{
-+	int i;
-+
-+	if (s->s_fs_info) {
-+		struct squashfs_sb_info *sbi = s->s_fs_info;
-+		if (sbi->block_cache)
-+			for (i = 0; i < SQUASHFS_CACHED_BLKS; i++)
-+				if (sbi->block_cache[i].block !=
-+							SQUASHFS_INVALID_BLK)
-+					kfree(sbi->block_cache[i].data);
-+		if (sbi->fragment)
-+			for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) 
-+				SQUASHFS_FREE(sbi->fragment[i].data);
-+		kfree(sbi->fragment);
-+		kfree(sbi->block_cache);
-+		kfree(sbi->read_data);
-+		kfree(sbi->read_page);
-+		kfree(sbi->uid);
-+		kfree(sbi->fragment_index);
-+		kfree(sbi->fragment_index_2);
-+		kfree(sbi->meta_index);
-+		kfree(s->s_fs_info);
-+		s->s_fs_info = NULL;
-+	}
-+}
-+
-+
-+static struct super_block *squashfs_get_sb(struct file_system_type *fs_type,
-+				int flags, const char *dev_name, void *data)
-+{
-+	return get_sb_bdev(fs_type, flags, dev_name, data, squashfs_fill_super);
-+}
-+
-+
-+static int __init init_squashfs_fs(void)
-+{
-+	int err = init_inodecache();
-+	if (err)
-+		goto out;
-+
-+	printk(KERN_INFO "squashfs: version 3.0 (2006/03/15) "
-+		"Phillip Lougher\n");
-+
-+	if (!(stream.workspace = vmalloc(zlib_inflate_workspacesize()))) {
-+		ERROR("Failed to allocate zlib workspace\n");
-+		destroy_inodecache();
-+		err = -ENOMEM;
-+		goto out;
-+	}
-+
-+	if ((err = register_filesystem(&squashfs_fs_type))) {
-+		vfree(stream.workspace);
-+		destroy_inodecache();
-+	}
-+
-+out:
-+	return err;
-+}
-+
-+
-+static void __exit exit_squashfs_fs(void)
-+{
-+	vfree(stream.workspace);
-+	unregister_filesystem(&squashfs_fs_type);
-+	destroy_inodecache();
-+}
-+
-+
-+static kmem_cache_t * squashfs_inode_cachep;
-+
-+
-+static struct inode *squashfs_alloc_inode(struct super_block *sb)
-+{
-+	struct squashfs_inode_info *ei;
-+	ei = kmem_cache_alloc(squashfs_inode_cachep, SLAB_KERNEL);
-+	if (!ei)
-+		return NULL;
-+	return &ei->vfs_inode;
-+}
-+
-+
-+static void squashfs_destroy_inode(struct inode *inode)
-+{
-+	kmem_cache_free(squashfs_inode_cachep, SQUASHFS_I(inode));
-+}
-+
-+
-+static void init_once(void * foo, kmem_cache_t * cachep, unsigned long flags)
-+{
-+	struct squashfs_inode_info *ei = foo;
-+
-+	if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
-+							SLAB_CTOR_CONSTRUCTOR)
-+		inode_init_once(&ei->vfs_inode);
-+}
-+ 
-+
-+static int __init init_inodecache(void)
-+{
-+	squashfs_inode_cachep = kmem_cache_create("squashfs_inode_cache",
-+	     sizeof(struct squashfs_inode_info),
-+	     0, SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT,
-+	     init_once, NULL);
-+	if (squashfs_inode_cachep == NULL)
-+		return -ENOMEM;
-+	return 0;
-+}
-+
-+
-+static void destroy_inodecache(void)
-+{
-+	if (kmem_cache_destroy(squashfs_inode_cachep))
-+		printk(KERN_INFO "squashfs_inode_cache: not all structures "
-+			"were freed\n");
-+}
-+
-+
-+module_init(init_squashfs_fs);
-+module_exit(exit_squashfs_fs);
-+MODULE_DESCRIPTION("squashfs, a compressed read-only filesystem");
-+MODULE_AUTHOR("Phillip Lougher <phillip@lougher.org.uk>");
-+MODULE_LICENSE("GPL");
-diff --new-file -urp linux-2.6.15/fs/squashfs/Makefile linux-2.6.15-squashfs3.0/fs/squashfs/Makefile
---- linux-2.6.15/fs/squashfs/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-squashfs3.0/fs/squashfs/Makefile	2006-03-07 21:12:37.000000000 +0000
-@@ -0,0 +1,7 @@
-+#
-+# Makefile for the linux squashfs routines.
-+#
-+
-+obj-$(CONFIG_SQUASHFS) += squashfs.o
-+squashfs-y += inode.o
-+squashfs-y += squashfs2_0.o
-diff --new-file -urp linux-2.6.15/fs/squashfs/squashfs2_0.c linux-2.6.15-squashfs3.0/fs/squashfs/squashfs2_0.c
---- linux-2.6.15/fs/squashfs/squashfs2_0.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-squashfs3.0/fs/squashfs/squashfs2_0.c	2006-03-07 21:12:37.000000000 +0000
-@@ -0,0 +1,758 @@
-+/*
-+ * Squashfs - a compressed read only filesystem for Linux
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006
-+ * Phillip Lougher <phillip@lougher.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs2_0.c
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/squashfs_fs.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/fs.h>
-+#include <linux/smp_lock.h>
-+#include <linux/slab.h>
-+#include <linux/squashfs_fs_sb.h>
-+#include <linux/squashfs_fs_i.h>
-+#include <linux/buffer_head.h>
-+#include <linux/vfs.h>
-+#include <linux/init.h>
-+#include <linux/dcache.h>
-+#include <linux/wait.h>
-+#include <linux/zlib.h>
-+#include <linux/blkdev.h>
-+#include <linux/vmalloc.h>
-+#include <asm/uaccess.h>
-+#include <asm/semaphore.h>
-+
-+#include "squashfs.h"
-+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir);
-+static struct dentry *squashfs_lookup_2(struct inode *, struct dentry *,
-+				struct nameidata *);
-+
-+static struct file_operations squashfs_dir_ops_2 = {
-+	.read = generic_read_dir,
-+	.readdir = squashfs_readdir_2
-+};
-+
-+static struct inode_operations squashfs_dir_inode_ops_2 = {
-+	.lookup = squashfs_lookup_2
-+};
-+
-+static unsigned char squashfs_filetype_table[] = {
-+	DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK
-+};
-+
-+static int read_fragment_index_table_2(struct super_block *s)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	if (!(msblk->fragment_index_2 = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES_2
-+					(sblk->fragments), GFP_KERNEL))) {
-+		ERROR("Failed to allocate uid/gid table\n");
-+		return 0;
-+	}
-+   
-+	if (SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments) &&
-+					!squashfs_read_data(s, (char *)
-+					msblk->fragment_index_2,
-+					sblk->fragment_table_start,
-+					SQUASHFS_FRAGMENT_INDEX_BYTES_2
-+					(sblk->fragments) |
-+					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
-+		ERROR("unable to read fragment index table\n");
-+		return 0;
-+	}
-+
-+	if (msblk->swap) {
-+		int i;
-+		unsigned int fragment;
-+
-+		for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES_2(sblk->fragments);
-+									i++) {
-+			SQUASHFS_SWAP_FRAGMENT_INDEXES_2((&fragment),
-+						&msblk->fragment_index_2[i], 1);
-+			msblk->fragment_index_2[i] = fragment;
-+		}
-+	}
-+
-+	return 1;
-+}
-+
-+
-+static int get_fragment_location_2(struct super_block *s, unsigned int fragment,
-+				long long *fragment_start_block,
-+				unsigned int *fragment_size)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	long long start_block =
-+		msblk->fragment_index_2[SQUASHFS_FRAGMENT_INDEX_2(fragment)];
-+	int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET_2(fragment);
-+	struct squashfs_fragment_entry_2 fragment_entry;
-+
-+	if (msblk->swap) {
-+		struct squashfs_fragment_entry_2 sfragment_entry;
-+
-+		if (!squashfs_get_cached_block(s, (char *) &sfragment_entry,
-+					start_block, offset,
-+					sizeof(sfragment_entry), &start_block,
-+					&offset))
-+			goto out;
-+		SQUASHFS_SWAP_FRAGMENT_ENTRY_2(&fragment_entry, &sfragment_entry);
-+	} else
-+		if (!squashfs_get_cached_block(s, (char *) &fragment_entry,
-+					start_block, offset,
-+					sizeof(fragment_entry), &start_block,
-+					&offset))
-+			goto out;
-+
-+	*fragment_start_block = fragment_entry.start_block;
-+	*fragment_size = fragment_entry.size;
-+
-+	return 1;
-+
-+out:
-+	return 0;
-+}
-+
-+
-+static struct inode *squashfs_new_inode(struct super_block *s,
-+		struct squashfs_base_inode_header_2 *inodeb, unsigned int ino)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	struct inode *i = new_inode(s);
-+
-+	if (i) {
-+		i->i_ino = ino;
-+		i->i_mtime.tv_sec = sblk->mkfs_time;
-+		i->i_atime.tv_sec = sblk->mkfs_time;
-+		i->i_ctime.tv_sec = sblk->mkfs_time;
-+		i->i_uid = msblk->uid[inodeb->uid];
-+		i->i_mode = inodeb->mode;
-+		i->i_nlink = 1;
-+		i->i_size = 0;
-+		if (inodeb->guid == SQUASHFS_GUIDS)
-+			i->i_gid = i->i_uid;
-+		else
-+			i->i_gid = msblk->guid[inodeb->guid];
-+	}
-+
-+	return i;
-+}
-+
-+
-+static struct inode *squashfs_iget_2(struct super_block *s, squashfs_inode_t inode)
-+{
-+	struct inode *i;
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	unsigned int block = SQUASHFS_INODE_BLK(inode) +
-+		sblk->inode_table_start;
-+	unsigned int offset = SQUASHFS_INODE_OFFSET(inode);
-+	unsigned int ino = SQUASHFS_MK_VFS_INODE(block
-+		- sblk->inode_table_start, offset);
-+	long long next_block;
-+	unsigned int next_offset;
-+	union squashfs_inode_header_2 id, sid;
-+	struct squashfs_base_inode_header_2 *inodeb = &id.base,
-+					  *sinodeb = &sid.base;
-+
-+	TRACE("Entered squashfs_iget\n");
-+
-+	if (msblk->swap) {
-+		if (!squashfs_get_cached_block(s, (char *) sinodeb, block,
-+					offset, sizeof(*sinodeb), &next_block,
-+					&next_offset))
-+			goto failed_read;
-+		SQUASHFS_SWAP_BASE_INODE_HEADER_2(inodeb, sinodeb,
-+					sizeof(*sinodeb));
-+	} else
-+		if (!squashfs_get_cached_block(s, (char *) inodeb, block,
-+					offset, sizeof(*inodeb), &next_block,
-+					&next_offset))
-+			goto failed_read;
-+
-+	switch(inodeb->inode_type) {
-+		case SQUASHFS_FILE_TYPE: {
-+			struct squashfs_reg_inode_header_2 *inodep = &id.reg;
-+			struct squashfs_reg_inode_header_2 *sinodep = &sid.reg;
-+			long long frag_blk;
-+			unsigned int frag_size;
-+				
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_REG_INODE_HEADER_2(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			frag_blk = SQUASHFS_INVALID_BLK;
-+			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
-+					!get_fragment_location_2(s,
-+					inodep->fragment, &frag_blk, &frag_size))
-+				goto failed_read;
-+				
-+			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_size = inodep->file_size;
-+			i->i_fop = &generic_ro_fops;
-+			i->i_mode |= S_IFREG;
-+			i->i_mtime.tv_sec = inodep->mtime;
-+			i->i_atime.tv_sec = inodep->mtime;
-+			i->i_ctime.tv_sec = inodep->mtime;
-+			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
-+			i->i_blksize = PAGE_CACHE_SIZE;
-+			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
-+			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
-+			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+			if (sblk->block_size > 4096)
-+				i->i_data.a_ops = &squashfs_aops;
-+			else
-+				i->i_data.a_ops = &squashfs_aops_4K;
-+
-+			TRACE("File inode %x:%x, start_block %x, "
-+					"block_list_start %llx, offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, next_block,
-+					next_offset);
-+			break;
-+		}
-+		case SQUASHFS_DIR_TYPE: {
-+			struct squashfs_dir_inode_header_2 *inodep = &id.dir;
-+			struct squashfs_dir_inode_header_2 *sinodep = &sid.dir;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_DIR_INODE_HEADER_2(inodep, sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_size = inodep->file_size;
-+			i->i_op = &squashfs_dir_inode_ops_2;
-+			i->i_fop = &squashfs_dir_ops_2;
-+			i->i_mode |= S_IFDIR;
-+			i->i_mtime.tv_sec = inodep->mtime;
-+			i->i_atime.tv_sec = inodep->mtime;
-+			i->i_ctime.tv_sec = inodep->mtime;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->offset = inodep->offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_count = 0;
-+			SQUASHFS_I(i)->u.s2.parent_inode = 0;
-+
-+			TRACE("Directory inode %x:%x, start_block %x, offset "
-+					"%x\n", SQUASHFS_INODE_BLK(inode),
-+					offset, inodep->start_block,
-+					inodep->offset);
-+			break;
-+		}
-+		case SQUASHFS_LDIR_TYPE: {
-+			struct squashfs_ldir_inode_header_2 *inodep = &id.ldir;
-+			struct squashfs_ldir_inode_header_2 *sinodep = &sid.ldir;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_LDIR_INODE_HEADER_2(inodep,
-+						sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_size = inodep->file_size;
-+			i->i_op = &squashfs_dir_inode_ops_2;
-+			i->i_fop = &squashfs_dir_ops_2;
-+			i->i_mode |= S_IFDIR;
-+			i->i_mtime.tv_sec = inodep->mtime;
-+			i->i_atime.tv_sec = inodep->mtime;
-+			i->i_ctime.tv_sec = inodep->mtime;
-+			SQUASHFS_I(i)->start_block = inodep->start_block;
-+			SQUASHFS_I(i)->offset = inodep->offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_start = next_block;
-+			SQUASHFS_I(i)->u.s2.directory_index_offset =
-+								next_offset;
-+			SQUASHFS_I(i)->u.s2.directory_index_count =
-+								inodep->i_count;
-+			SQUASHFS_I(i)->u.s2.parent_inode = 0;
-+
-+			TRACE("Long directory inode %x:%x, start_block %x, "
-+					"offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->start_block, inodep->offset);
-+			break;
-+		}
-+		case SQUASHFS_SYMLINK_TYPE: {
-+			struct squashfs_symlink_inode_header_2 *inodep =
-+								&id.symlink;
-+			struct squashfs_symlink_inode_header_2 *sinodep =
-+								&sid.symlink;
-+	
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(inodep,
-+								sinodep);
-+			} else
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_size = inodep->symlink_size;
-+			i->i_op = &page_symlink_inode_operations;
-+			i->i_data.a_ops = &squashfs_symlink_aops;
-+			i->i_mode |= S_IFLNK;
-+			SQUASHFS_I(i)->start_block = next_block;
-+			SQUASHFS_I(i)->offset = next_offset;
-+
-+			TRACE("Symbolic link inode %x:%x, start_block %llx, "
-+					"offset %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					next_block, next_offset);
-+			break;
-+		 }
-+		 case SQUASHFS_BLKDEV_TYPE:
-+		 case SQUASHFS_CHRDEV_TYPE: {
-+			struct squashfs_dev_inode_header_2 *inodep = &id.dev;
-+			struct squashfs_dev_inode_header_2 *sinodep = &sid.dev;
-+
-+			if (msblk->swap) {
-+				if (!squashfs_get_cached_block(s, (char *)
-+						sinodep, block, offset,
-+						sizeof(*sinodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				SQUASHFS_SWAP_DEV_INODE_HEADER_2(inodep, sinodep);
-+			} else	
-+				if (!squashfs_get_cached_block(s, (char *)
-+						inodep, block, offset,
-+						sizeof(*inodep), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+			if ((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_mode |= (inodeb->inode_type ==
-+					SQUASHFS_CHRDEV_TYPE) ?  S_IFCHR :
-+					S_IFBLK;
-+			init_special_inode(i, i->i_mode,
-+					old_decode_dev(inodep->rdev));
-+
-+			TRACE("Device inode %x:%x, rdev %x\n",
-+					SQUASHFS_INODE_BLK(inode), offset,
-+					inodep->rdev);
-+			break;
-+		 }
-+		 case SQUASHFS_FIFO_TYPE:
-+		 case SQUASHFS_SOCKET_TYPE: {
-+			if ((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
-+				goto failed_read1;
-+
-+			i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE)
-+							? S_IFIFO : S_IFSOCK;
-+			init_special_inode(i, i->i_mode, 0);
-+			break;
-+		 }
-+		 default:
-+			ERROR("Unknown inode type %d in squashfs_iget!\n",
-+					inodeb->inode_type);
-+			goto failed_read1;
-+	}
-+	
-+	insert_inode_hash(i);
-+	return i;
-+
-+failed_read:
-+	ERROR("Unable to read inode [%x:%x]\n", block, offset);
-+
-+failed_read1:
-+	return NULL;
-+}
-+
-+
-+static int get_dir_index_using_offset(struct super_block *s, long long 
-+				*next_block, unsigned int *next_offset,
-+				long long index_start,
-+				unsigned int index_offset, int i_count,
-+				long long f_pos)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i, length = 0;
-+	struct squashfs_dir_index_2 index;
-+
-+	TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n",
-+					i_count, (unsigned int) f_pos);
-+
-+	if (f_pos == 0)
-+		goto finish;
-+
-+	for (i = 0; i < i_count; i++) {
-+		if (msblk->swap) {
-+			struct squashfs_dir_index_2 sindex;
-+			squashfs_get_cached_block(s, (char *) &sindex,
-+					index_start, index_offset,
-+					sizeof(sindex), &index_start,
-+					&index_offset);
-+			SQUASHFS_SWAP_DIR_INDEX_2(&index, &sindex);
-+		} else
-+			squashfs_get_cached_block(s, (char *) &index,
-+					index_start, index_offset,
-+					sizeof(index), &index_start,
-+					&index_offset);
-+
-+		if (index.index > f_pos)
-+			break;
-+
-+		squashfs_get_cached_block(s, NULL, index_start, index_offset,
-+					index.size + 1, &index_start,
-+					&index_offset);
-+
-+		length = index.index;
-+		*next_block = index.start_block + sblk->directory_table_start;
-+	}
-+
-+	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
-+
-+finish:
-+	return length;
-+}
-+
-+
-+static int get_dir_index_using_name(struct super_block *s, long long
-+				*next_block, unsigned int *next_offset,
-+				long long index_start,
-+				unsigned int index_offset, int i_count,
-+				const char *name, int size)
-+{
-+	struct squashfs_sb_info *msblk = s->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	int i, length = 0;
-+	char buffer[sizeof(struct squashfs_dir_index_2) + SQUASHFS_NAME_LEN + 1];
-+	struct squashfs_dir_index_2 *index = (struct squashfs_dir_index_2 *) buffer;
-+	char str[SQUASHFS_NAME_LEN + 1];
-+
-+	TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count);
-+
-+	strncpy(str, name, size);
-+	str[size] = '\0';
-+
-+	for (i = 0; i < i_count; i++) {
-+		if (msblk->swap) {
-+			struct squashfs_dir_index_2 sindex;
-+			squashfs_get_cached_block(s, (char *) &sindex,
-+					index_start, index_offset,
-+					sizeof(sindex), &index_start,
-+					&index_offset);
-+			SQUASHFS_SWAP_DIR_INDEX_2(index, &sindex);
-+		} else
-+			squashfs_get_cached_block(s, (char *) index,
-+					index_start, index_offset,
-+					sizeof(struct squashfs_dir_index_2),
-+					&index_start, &index_offset);
-+
-+		squashfs_get_cached_block(s, index->name, index_start,
-+					index_offset, index->size + 1,
-+					&index_start, &index_offset);
-+
-+		index->name[index->size + 1] = '\0';
-+
-+		if (strcmp(index->name, str) > 0)
-+			break;
-+
-+		length = index->index;
-+		*next_block = index->start_block + sblk->directory_table_start;
-+	}
-+
-+	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
-+	return length;
-+}
-+
-+		
-+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir)
-+{
-+	struct inode *i = file->f_dentry->d_inode;
-+	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long next_block = SQUASHFS_I(i)->start_block +
-+		sblk->directory_table_start;
-+	int next_offset = SQUASHFS_I(i)->offset, length = 0, dirs_read = 0,
-+		dir_count;
-+	struct squashfs_dir_header_2 dirh;
-+	char buffer[sizeof(struct squashfs_dir_entry_2) + SQUASHFS_NAME_LEN + 1];
-+	struct squashfs_dir_entry_2 *dire = (struct squashfs_dir_entry_2 *) buffer;
-+
-+	TRACE("Entered squashfs_readdir_2 [%llx:%x]\n", next_block, next_offset);
-+
-+	length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_start,
-+				SQUASHFS_I(i)->u.s2.directory_index_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_count,
-+				file->f_pos);
-+
-+	while (length < i_size_read(i)) {
-+		/* read directory header */
-+		if (msblk->swap) {
-+			struct squashfs_dir_header_2 sdirh;
-+			
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
-+					next_block, next_offset, sizeof(sdirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(sdirh);
-+			SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh);
-+		} else {
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
-+					next_block, next_offset, sizeof(dirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(dirh);
-+		}
-+
-+		dir_count = dirh.count + 1;
-+		while (dir_count--) {
-+			if (msblk->swap) {
-+				struct squashfs_dir_entry_2 sdire;
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						&sdire, next_block, next_offset,
-+						sizeof(sdire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				
-+				length += sizeof(sdire);
-+				SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire);
-+			} else {
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						dire, next_block, next_offset,
-+						sizeof(*dire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+				length += sizeof(*dire);
-+			}
-+
-+			if (!squashfs_get_cached_block(i->i_sb, dire->name,
-+						next_block, next_offset,
-+						dire->size + 1, &next_block,
-+						&next_offset))
-+				goto failed_read;
-+
-+			length += dire->size + 1;
-+
-+			if (file->f_pos >= length)
-+				continue;
-+
-+			dire->name[dire->size + 1] = '\0';
-+
-+			TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d)\n",
-+					(unsigned int) dirent, dire->name,
-+					dire->size + 1, (int) file->f_pos,
-+					dirh.start_block, dire->offset,
-+					squashfs_filetype_table[dire->type]);
-+
-+			if (filldir(dirent, dire->name, dire->size + 1,
-+					file->f_pos, SQUASHFS_MK_VFS_INODE(
-+					dirh.start_block, dire->offset),
-+					squashfs_filetype_table[dire->type])
-+					< 0) {
-+				TRACE("Filldir returned less than 0\n");
-+				goto finish;
-+			}
-+			file->f_pos = length;
-+			dirs_read++;
-+		}
-+	}
-+
-+finish:
-+	return dirs_read;
-+
-+failed_read:
-+	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
-+		next_offset);
-+	return 0;
-+}
-+
-+
-+static struct dentry *squashfs_lookup_2(struct inode *i, struct dentry *dentry,
-+				struct nameidata *nd)
-+{
-+	const unsigned char *name = dentry->d_name.name;
-+	int len = dentry->d_name.len;
-+	struct inode *inode = NULL;
-+	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+	long long next_block = SQUASHFS_I(i)->start_block +
-+				sblk->directory_table_start;
-+	int next_offset = SQUASHFS_I(i)->offset, length = 0,
-+				dir_count;
-+	struct squashfs_dir_header_2 dirh;
-+	char buffer[sizeof(struct squashfs_dir_entry_2) + SQUASHFS_NAME_LEN];
-+	struct squashfs_dir_entry_2 *dire = (struct squashfs_dir_entry_2 *) buffer;
-+	int sorted = sblk->s_major == 2 && sblk->s_minor >= 1;
-+
-+	TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset);
-+
-+	if (len > SQUASHFS_NAME_LEN)
-+		goto exit_loop;
-+
-+	length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_start,
-+				SQUASHFS_I(i)->u.s2.directory_index_offset,
-+				SQUASHFS_I(i)->u.s2.directory_index_count, name,
-+				len);
-+
-+	while (length < i_size_read(i)) {
-+		/* read directory header */
-+		if (msblk->swap) {
-+			struct squashfs_dir_header_2 sdirh;
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
-+					next_block, next_offset, sizeof(sdirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(sdirh);
-+			SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh);
-+		} else {
-+			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
-+					next_block, next_offset, sizeof(dirh),
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += sizeof(dirh);
-+		}
-+
-+		dir_count = dirh.count + 1;
-+		while (dir_count--) {
-+			if (msblk->swap) {
-+				struct squashfs_dir_entry_2 sdire;
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						&sdire, next_block,next_offset,
-+						sizeof(sdire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+				
-+				length += sizeof(sdire);
-+				SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire);
-+			} else {
-+				if (!squashfs_get_cached_block(i->i_sb, (char *)
-+						dire, next_block,next_offset,
-+						sizeof(*dire), &next_block,
-+						&next_offset))
-+					goto failed_read;
-+
-+				length += sizeof(*dire);
-+			}
-+
-+			if (!squashfs_get_cached_block(i->i_sb, dire->name,
-+					next_block, next_offset, dire->size + 1,
-+					&next_block, &next_offset))
-+				goto failed_read;
-+
-+			length += dire->size + 1;
-+
-+			if (sorted && name[0] < dire->name[0])
-+				goto exit_loop;
-+
-+			if ((len == dire->size + 1) && !strncmp(name,
-+						dire->name, len)) {
-+				squashfs_inode_t ino =
-+					SQUASHFS_MKINODE(dirh.start_block,
-+					dire->offset);
-+
-+				TRACE("calling squashfs_iget for directory "
-+					"entry %s, inode %x:%x, %lld\n", name,
-+					dirh.start_block, dire->offset, ino);
-+
-+				inode = (msblk->iget)(i->i_sb, ino);
-+
-+				goto exit_loop;
-+			}
-+		}
-+	}
-+
-+exit_loop:
-+	d_add(dentry, inode);
-+	return ERR_PTR(0);
-+
-+failed_read:
-+	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
-+		next_offset);
-+	goto exit_loop;
-+}
-+
-+
-+int squashfs_2_0_supported(struct squashfs_sb_info *msblk)
-+{
-+	struct squashfs_super_block *sblk = &msblk->sblk;
-+
-+	msblk->iget = squashfs_iget_2;
-+	msblk->read_fragment_index_table = read_fragment_index_table_2;
-+
-+	sblk->bytes_used = sblk->bytes_used_2;
-+	sblk->uid_start = sblk->uid_start_2;
-+	sblk->guid_start = sblk->guid_start_2;
-+	sblk->inode_table_start = sblk->inode_table_start_2;
-+	sblk->directory_table_start = sblk->directory_table_start_2;
-+	sblk->fragment_table_start = sblk->fragment_table_start_2;
-+
-+	return 1;
-+}
-diff --new-file -urp linux-2.6.15/fs/squashfs/squashfs.h linux-2.6.15-squashfs3.0/fs/squashfs/squashfs.h
---- linux-2.6.15/fs/squashfs/squashfs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-squashfs3.0/fs/squashfs/squashfs.h	2006-03-07 21:12:37.000000000 +0000
-@@ -0,0 +1,86 @@
-+/*
-+ * Squashfs - a compressed read only filesystem for Linux
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006
-+ * Phillip Lougher <phillip@lougher.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs.h
-+ */
-+
-+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
-+#undef CONFIG_SQUASHFS_1_0_COMPATIBILITY
-+#endif
-+
-+#ifdef SQUASHFS_TRACE
-+#define TRACE(s, args...)	printk(KERN_NOTICE "SQUASHFS: "s, ## args)
-+#else
-+#define TRACE(s, args...)	{}
-+#endif
-+
-+#define ERROR(s, args...)	printk(KERN_ERR "SQUASHFS error: "s, ## args)
-+
-+#define SERROR(s, args...)	do { \
-+				if (!silent) \
-+				printk(KERN_ERR "SQUASHFS error: "s, ## args);\
-+				} while(0)
-+
-+#define WARNING(s, args...)	printk(KERN_WARNING "SQUASHFS: "s, ## args)
-+
-+static inline struct squashfs_inode_info *SQUASHFS_I(struct inode *inode)
-+{
-+	return list_entry(inode, struct squashfs_inode_info, vfs_inode);
-+}
-+
-+#if defined(CONFIG_SQUASHFS_1_0_COMPATIBILITY ) || defined(CONFIG_SQUASHFS_2_0_COMPATIBILITY)
-+#define SQSH_EXTERN
-+extern unsigned int squashfs_read_data(struct super_block *s, char *buffer,
-+				long long index, unsigned int length,
-+				long long *next_index);
-+extern int squashfs_get_cached_block(struct super_block *s, char *buffer,
-+				long long block, unsigned int offset,
-+				int length, long long *next_block,
-+				unsigned int *next_offset);
-+extern void release_cached_fragment(struct squashfs_sb_info *msblk, struct
-+					squashfs_fragment_cache *fragment);
-+extern struct squashfs_fragment_cache *get_cached_fragment(struct super_block
-+					*s, long long start_block,
-+					int length);
-+extern struct address_space_operations squashfs_symlink_aops;
-+extern struct address_space_operations squashfs_aops;
-+extern struct address_space_operations squashfs_aops_4K;
-+extern struct inode_operations squashfs_dir_inode_ops;
-+#else
-+#define SQSH_EXTERN static
-+#endif
-+
-+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
-+extern int squashfs_1_0_supported(struct squashfs_sb_info *msblk);
-+#else
-+static inline int squashfs_1_0_supported(struct squashfs_sb_info *msblk)
-+{
-+	return 0;
-+}
-+#endif
-+
-+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+extern int squashfs_2_0_supported(struct squashfs_sb_info *msblk);
-+#else
-+static inline int squashfs_2_0_supported(struct squashfs_sb_info *msblk)
-+{
-+	return 0;
-+}
-+#endif
-diff --new-file -urp linux-2.6.15/include/linux/squashfs_fs.h linux-2.6.15-squashfs3.0/include/linux/squashfs_fs.h
---- linux-2.6.15/include/linux/squashfs_fs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-squashfs3.0/include/linux/squashfs_fs.h	2006-03-07 21:12:37.000000000 +0000
-@@ -0,0 +1,911 @@
-+#ifndef SQUASHFS_FS
-+#define SQUASHFS_FS
-+
-+/*
-+ * Squashfs
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006
-+ * Phillip Lougher <phillip@lougher.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs_fs.h
-+ */
-+
-+#ifndef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+#define CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+#endif
-+
-+#ifdef	CONFIG_SQUASHFS_VMALLOC
-+#define SQUASHFS_ALLOC(a)		vmalloc(a)
-+#define SQUASHFS_FREE(a)		vfree(a)
-+#else
-+#define SQUASHFS_ALLOC(a)		kmalloc(a, GFP_KERNEL)
-+#define SQUASHFS_FREE(a)		kfree(a)
-+#endif
-+#define SQUASHFS_CACHED_FRAGMENTS	CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE	
-+#define SQUASHFS_MAJOR			3
-+#define SQUASHFS_MINOR			0
-+#define SQUASHFS_MAGIC			0x73717368
-+#define SQUASHFS_MAGIC_SWAP		0x68737173
-+#define SQUASHFS_START			0
-+
-+/* size of metadata (inode and directory) blocks */
-+#define SQUASHFS_METADATA_SIZE		8192
-+#define SQUASHFS_METADATA_LOG		13
-+
-+/* default size of data blocks */
-+#define SQUASHFS_FILE_SIZE		65536
-+#define SQUASHFS_FILE_LOG		16
-+
-+#define SQUASHFS_FILE_MAX_SIZE		65536
-+
-+/* Max number of uids and gids */
-+#define SQUASHFS_UIDS			256
-+#define SQUASHFS_GUIDS			255
-+
-+/* Max length of filename (not 255) */
-+#define SQUASHFS_NAME_LEN		256
-+
-+#define SQUASHFS_INVALID		((long long) 0xffffffffffff)
-+#define SQUASHFS_INVALID_FRAG		((unsigned int) 0xffffffff)
-+#define SQUASHFS_INVALID_BLK		((long long) -1)
-+#define SQUASHFS_USED_BLK		((long long) -2)
-+
-+/* Filesystem flags */
-+#define SQUASHFS_NOI			0
-+#define SQUASHFS_NOD			1
-+#define SQUASHFS_CHECK			2
-+#define SQUASHFS_NOF			3
-+#define SQUASHFS_NO_FRAG		4
-+#define SQUASHFS_ALWAYS_FRAG		5
-+#define SQUASHFS_DUPLICATE		6
-+
-+#define SQUASHFS_BIT(flag, bit)		((flag >> bit) & 1)
-+
-+#define SQUASHFS_UNCOMPRESSED_INODES(flags)	SQUASHFS_BIT(flags, \
-+						SQUASHFS_NOI)
-+
-+#define SQUASHFS_UNCOMPRESSED_DATA(flags)	SQUASHFS_BIT(flags, \
-+						SQUASHFS_NOD)
-+
-+#define SQUASHFS_UNCOMPRESSED_FRAGMENTS(flags)	SQUASHFS_BIT(flags, \
-+						SQUASHFS_NOF)
-+
-+#define SQUASHFS_NO_FRAGMENTS(flags)		SQUASHFS_BIT(flags, \
-+						SQUASHFS_NO_FRAG)
-+
-+#define SQUASHFS_ALWAYS_FRAGMENTS(flags)	SQUASHFS_BIT(flags, \
-+						SQUASHFS_ALWAYS_FRAG)
-+
-+#define SQUASHFS_DUPLICATES(flags)		SQUASHFS_BIT(flags, \
-+						SQUASHFS_DUPLICATE)
-+
-+#define SQUASHFS_CHECK_DATA(flags)		SQUASHFS_BIT(flags, \
-+						SQUASHFS_CHECK)
-+
-+#define SQUASHFS_MKFLAGS(noi, nod, check_data, nof, no_frag, always_frag, \
-+		duplicate_checking)	(noi | (nod << 1) | (check_data << 2) \
-+		| (nof << 3) | (no_frag << 4) | (always_frag << 5) | \
-+		(duplicate_checking << 6))
-+
-+/* Max number of types and file types */
-+#define SQUASHFS_DIR_TYPE		1
-+#define SQUASHFS_FILE_TYPE		2
-+#define SQUASHFS_SYMLINK_TYPE		3
-+#define SQUASHFS_BLKDEV_TYPE		4
-+#define SQUASHFS_CHRDEV_TYPE		5
-+#define SQUASHFS_FIFO_TYPE		6
-+#define SQUASHFS_SOCKET_TYPE		7
-+#define SQUASHFS_LDIR_TYPE		8
-+#define SQUASHFS_LREG_TYPE		9
-+
-+/* 1.0 filesystem type definitions */
-+#define SQUASHFS_TYPES			5
-+#define SQUASHFS_IPC_TYPE		0
-+
-+/* Flag whether block is compressed or uncompressed, bit is set if block is
-+ * uncompressed */
-+#define SQUASHFS_COMPRESSED_BIT		(1 << 15)
-+
-+#define SQUASHFS_COMPRESSED_SIZE(B)	(((B) & ~SQUASHFS_COMPRESSED_BIT) ? \
-+		(B) & ~SQUASHFS_COMPRESSED_BIT :  SQUASHFS_COMPRESSED_BIT)
-+
-+#define SQUASHFS_COMPRESSED(B)		(!((B) & SQUASHFS_COMPRESSED_BIT))
-+
-+#define SQUASHFS_COMPRESSED_BIT_BLOCK		(1 << 24)
-+
-+#define SQUASHFS_COMPRESSED_SIZE_BLOCK(B)	(((B) & \
-+	~SQUASHFS_COMPRESSED_BIT_BLOCK) ? (B) & \
-+	~SQUASHFS_COMPRESSED_BIT_BLOCK : SQUASHFS_COMPRESSED_BIT_BLOCK)
-+
-+#define SQUASHFS_COMPRESSED_BLOCK(B)	(!((B) & SQUASHFS_COMPRESSED_BIT_BLOCK))
-+
-+/*
-+ * Inode number ops.  Inodes consist of a compressed block number, and an
-+ * uncompressed  offset within that block
-+ */
-+#define SQUASHFS_INODE_BLK(a)		((unsigned int) ((a) >> 16))
-+
-+#define SQUASHFS_INODE_OFFSET(a)	((unsigned int) ((a) & 0xffff))
-+
-+#define SQUASHFS_MKINODE(A, B)		((squashfs_inode_t)(((squashfs_inode_t) (A)\
-+					<< 16) + (B)))
-+
-+/* Compute 32 bit VFS inode number from squashfs inode number */
-+#define SQUASHFS_MK_VFS_INODE(a, b)	((unsigned int) (((a) << 8) + \
-+					((b) >> 2) + 1))
-+/* XXX */
-+
-+/* Translate between VFS mode and squashfs mode */
-+#define SQUASHFS_MODE(a)		((a) & 0xfff)
-+
-+/* fragment and fragment table defines */
-+#define SQUASHFS_FRAGMENT_BYTES(A)	(A * sizeof(struct squashfs_fragment_entry))
-+
-+#define SQUASHFS_FRAGMENT_INDEX(A)	(SQUASHFS_FRAGMENT_BYTES(A) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEX_OFFSET(A)	(SQUASHFS_FRAGMENT_BYTES(A) % \
-+						SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEXES(A)	((SQUASHFS_FRAGMENT_BYTES(A) + \
-+					SQUASHFS_METADATA_SIZE - 1) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEX_BYTES(A)	(SQUASHFS_FRAGMENT_INDEXES(A) *\
-+						sizeof(long long))
-+
-+/* cached data constants for filesystem */
-+#define SQUASHFS_CACHED_BLKS		8
-+
-+#define SQUASHFS_MAX_FILE_SIZE_LOG	64
-+
-+#define SQUASHFS_MAX_FILE_SIZE		((long long) 1 << \
-+					(SQUASHFS_MAX_FILE_SIZE_LOG - 2))
-+
-+#define SQUASHFS_MARKER_BYTE		0xff
-+
-+/* meta index cache */
-+#define SQUASHFS_META_INDEXES	(SQUASHFS_METADATA_SIZE / sizeof(unsigned int))
-+#define SQUASHFS_META_ENTRIES	31
-+#define SQUASHFS_META_NUMBER	8
-+#define SQUASHFS_SLOTS		4
-+
-+struct meta_entry {
-+	long long		data_block;
-+	unsigned int		index_block;
-+	unsigned short		offset;
-+	unsigned short		pad;
-+};
-+
-+struct meta_index {
-+	unsigned int		inode_number;
-+	unsigned int		offset;
-+	unsigned short		entries;
-+	unsigned short		skip;
-+	unsigned short		locked;
-+	unsigned short		pad;
-+	struct meta_entry	meta_entry[SQUASHFS_META_ENTRIES];
-+};
-+
-+
-+/*
-+ * definitions for structures on disk
-+ */
-+
-+typedef long long		squashfs_block_t;
-+typedef long long		squashfs_inode_t;
-+
-+struct squashfs_super_block {
-+	unsigned int		s_magic;
-+	unsigned int		inodes;
-+	unsigned int		bytes_used_2;
-+	unsigned int		uid_start_2;
-+	unsigned int		guid_start_2;
-+	unsigned int		inode_table_start_2;
-+	unsigned int		directory_table_start_2;
-+	unsigned int		s_major:16;
-+	unsigned int		s_minor:16;
-+	unsigned int		block_size_1:16;
-+	unsigned int		block_log:16;
-+	unsigned int		flags:8;
-+	unsigned int		no_uids:8;
-+	unsigned int		no_guids:8;
-+	unsigned int		mkfs_time /* time of filesystem creation */;
-+	squashfs_inode_t	root_inode;
-+	unsigned int		block_size;
-+	unsigned int		fragments;
-+	unsigned int		fragment_table_start_2;
-+	long long		bytes_used;
-+	long long		uid_start;
-+	long long		guid_start;
-+	long long		inode_table_start;
-+	long long		directory_table_start;
-+	long long		fragment_table_start;
-+	long long		unused;
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_index {
-+	unsigned int		index;
-+	unsigned int		start_block;
-+	unsigned char		size;
-+	unsigned char		name[0];
-+} __attribute__ ((packed));
-+
-+#define SQUASHFS_BASE_INODE_HEADER		\
-+	unsigned int		inode_type:4;	\
-+	unsigned int		mode:12;	\
-+	unsigned int		uid:8;		\
-+	unsigned int		guid:8;		\
-+	unsigned int		mtime;		\
-+	unsigned int 		inode_number;
-+
-+struct squashfs_base_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+} __attribute__ ((packed));
-+
-+struct squashfs_ipc_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+} __attribute__ ((packed));
-+
-+struct squashfs_dev_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	unsigned short		rdev;
-+} __attribute__ ((packed));
-+	
-+struct squashfs_symlink_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	unsigned short		symlink_size;
-+	char			symlink[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_reg_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	squashfs_block_t	start_block;
-+	unsigned int		fragment;
-+	unsigned int		offset;
-+	unsigned int		file_size;
-+	unsigned short		block_list[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_lreg_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	squashfs_block_t	start_block;
-+	unsigned int		fragment;
-+	unsigned int		offset;
-+	long long		file_size;
-+	unsigned short		block_list[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	unsigned int		file_size:19;
-+	unsigned int		offset:13;
-+	unsigned int		start_block;
-+	unsigned int		parent_inode;
-+} __attribute__  ((packed));
-+
-+struct squashfs_ldir_inode_header {
-+	SQUASHFS_BASE_INODE_HEADER;
-+	unsigned int		nlink;
-+	unsigned int		file_size:27;
-+	unsigned int		offset:13;
-+	unsigned int		start_block;
-+	unsigned int		i_count:16;
-+	unsigned int		parent_inode;
-+	struct squashfs_dir_index	index[0];
-+} __attribute__  ((packed));
-+
-+union squashfs_inode_header {
-+	struct squashfs_base_inode_header	base;
-+	struct squashfs_dev_inode_header	dev;
-+	struct squashfs_symlink_inode_header	symlink;
-+	struct squashfs_reg_inode_header	reg;
-+	struct squashfs_lreg_inode_header	lreg;
-+	struct squashfs_dir_inode_header	dir;
-+	struct squashfs_ldir_inode_header	ldir;
-+	struct squashfs_ipc_inode_header	ipc;
-+};
-+	
-+struct squashfs_dir_entry {
-+	unsigned int		offset:13;
-+	unsigned int		type:3;
-+	unsigned int		size:8;
-+	int			inode_number:16;
-+	char			name[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_header {
-+	unsigned int		count:8;
-+	unsigned int		start_block;
-+	unsigned int		inode_number;
-+} __attribute__ ((packed));
-+
-+struct squashfs_fragment_entry {
-+	long long		start_block;
-+	unsigned int		size;
-+	unsigned int		unused;
-+} __attribute__ ((packed));
-+
-+extern int squashfs_uncompress_block(void *d, int dstlen, void *s, int srclen);
-+extern int squashfs_uncompress_init(void);
-+extern int squashfs_uncompress_exit(void);
-+
-+/*
-+ * macros to convert each packed bitfield structure from little endian to big
-+ * endian and vice versa.  These are needed when creating or using a filesystem
-+ * on a machine with different byte ordering to the target architecture.
-+ *
-+ */
-+
-+#define SQUASHFS_SWAP_START \
-+	int bits;\
-+	int b_pos;\
-+	unsigned long long val;\
-+	unsigned char *s;\
-+	unsigned char *d;
-+
-+#define SQUASHFS_SWAP_SUPER_BLOCK(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_super_block));\
-+	SQUASHFS_SWAP((s)->s_magic, d, 0, 32);\
-+	SQUASHFS_SWAP((s)->inodes, d, 32, 32);\
-+	SQUASHFS_SWAP((s)->bytes_used_2, d, 64, 32);\
-+	SQUASHFS_SWAP((s)->uid_start_2, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->guid_start_2, d, 128, 32);\
-+	SQUASHFS_SWAP((s)->inode_table_start_2, d, 160, 32);\
-+	SQUASHFS_SWAP((s)->directory_table_start_2, d, 192, 32);\
-+	SQUASHFS_SWAP((s)->s_major, d, 224, 16);\
-+	SQUASHFS_SWAP((s)->s_minor, d, 240, 16);\
-+	SQUASHFS_SWAP((s)->block_size_1, d, 256, 16);\
-+	SQUASHFS_SWAP((s)->block_log, d, 272, 16);\
-+	SQUASHFS_SWAP((s)->flags, d, 288, 8);\
-+	SQUASHFS_SWAP((s)->no_uids, d, 296, 8);\
-+	SQUASHFS_SWAP((s)->no_guids, d, 304, 8);\
-+	SQUASHFS_SWAP((s)->mkfs_time, d, 312, 32);\
-+	SQUASHFS_SWAP((s)->root_inode, d, 344, 64);\
-+	SQUASHFS_SWAP((s)->block_size, d, 408, 32);\
-+	SQUASHFS_SWAP((s)->fragments, d, 440, 32);\
-+	SQUASHFS_SWAP((s)->fragment_table_start_2, d, 472, 32);\
-+	SQUASHFS_SWAP((s)->bytes_used, d, 504, 64);\
-+	SQUASHFS_SWAP((s)->uid_start, d, 568, 64);\
-+	SQUASHFS_SWAP((s)->guid_start, d, 632, 64);\
-+	SQUASHFS_SWAP((s)->inode_table_start, d, 696, 64);\
-+	SQUASHFS_SWAP((s)->directory_table_start, d, 760, 64);\
-+	SQUASHFS_SWAP((s)->fragment_table_start, d, 824, 64);\
-+	SQUASHFS_SWAP((s)->unused, d, 888, 64);\
-+}
-+
-+#define SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\
-+	SQUASHFS_MEMSET(s, d, n);\
-+	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
-+	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
-+	SQUASHFS_SWAP((s)->uid, d, 16, 8);\
-+	SQUASHFS_SWAP((s)->guid, d, 24, 8);\
-+	SQUASHFS_SWAP((s)->mtime, d, 32, 32);\
-+	SQUASHFS_SWAP((s)->inode_number, d, 64, 32);
-+
-+#define SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, n) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\
-+}
-+
-+#define SQUASHFS_SWAP_IPC_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_ipc_inode_header))\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DEV_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_dev_inode_header)); \
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->rdev, d, 128, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_symlink_inode_header));\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->symlink_size, d, 128, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_REG_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_reg_inode_header));\
-+	SQUASHFS_SWAP((s)->start_block, d, 96, 64);\
-+	SQUASHFS_SWAP((s)->fragment, d, 160, 32);\
-+	SQUASHFS_SWAP((s)->offset, d, 192, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 224, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_LREG_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_lreg_inode_header));\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 128, 64);\
-+	SQUASHFS_SWAP((s)->fragment, d, 192, 32);\
-+	SQUASHFS_SWAP((s)->offset, d, 224, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 256, 64);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_dir_inode_header));\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 128, 19);\
-+	SQUASHFS_SWAP((s)->offset, d, 147, 13);\
-+	SQUASHFS_SWAP((s)->start_block, d, 160, 32);\
-+	SQUASHFS_SWAP((s)->parent_inode, d, 192, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_LDIR_INODE_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
-+			sizeof(struct squashfs_ldir_inode_header));\
-+	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 128, 27);\
-+	SQUASHFS_SWAP((s)->offset, d, 155, 13);\
-+	SQUASHFS_SWAP((s)->start_block, d, 168, 32);\
-+	SQUASHFS_SWAP((s)->i_count, d, 200, 16);\
-+	SQUASHFS_SWAP((s)->parent_inode, d, 216, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INDEX(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index));\
-+	SQUASHFS_SWAP((s)->index, d, 0, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 32, 32);\
-+	SQUASHFS_SWAP((s)->size, d, 64, 8);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_HEADER(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header));\
-+	SQUASHFS_SWAP((s)->count, d, 0, 8);\
-+	SQUASHFS_SWAP((s)->start_block, d, 8, 32);\
-+	SQUASHFS_SWAP((s)->inode_number, d, 40, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_ENTRY(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry));\
-+	SQUASHFS_SWAP((s)->offset, d, 0, 13);\
-+	SQUASHFS_SWAP((s)->type, d, 13, 3);\
-+	SQUASHFS_SWAP((s)->size, d, 16, 8);\
-+	SQUASHFS_SWAP((s)->inode_number, d, 24, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_ENTRY(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry));\
-+	SQUASHFS_SWAP((s)->start_block, d, 0, 64);\
-+	SQUASHFS_SWAP((s)->size, d, 64, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_SHORTS(s, d, n) {\
-+	int entry;\
-+	int bit_position;\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, n * 2);\
-+	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
-+			16)\
-+		SQUASHFS_SWAP(s[entry], d, bit_position, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_INTS(s, d, n) {\
-+	int entry;\
-+	int bit_position;\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, n * 4);\
-+	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
-+			32)\
-+		SQUASHFS_SWAP(s[entry], d, bit_position, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_LONG_LONGS(s, d, n) {\
-+	int entry;\
-+	int bit_position;\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, n * 8);\
-+	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
-+			64)\
-+		SQUASHFS_SWAP(s[entry], d, bit_position, 64);\
-+}
-+
-+#define SQUASHFS_SWAP_DATA(s, d, n, bits) {\
-+	int entry;\
-+	int bit_position;\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, n * bits / 8);\
-+	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
-+			bits)\
-+		SQUASHFS_SWAP(s[entry], d, bit_position, bits);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_INDEXES(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n)
-+
-+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
-+
-+struct squashfs_base_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+} __attribute__ ((packed));
-+
-+struct squashfs_ipc_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned int		type:4;
-+	unsigned int		offset:4;
-+} __attribute__ ((packed));
-+
-+struct squashfs_dev_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned short		rdev;
-+} __attribute__ ((packed));
-+	
-+struct squashfs_symlink_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned short		symlink_size;
-+	char			symlink[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_reg_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned int		mtime;
-+	unsigned int		start_block;
-+	unsigned int		file_size:32;
-+	unsigned short		block_list[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_inode_header_1 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:4; /* index into uid table */
-+	unsigned int		guid:4; /* index into guid table */
-+	unsigned int		file_size:19;
-+	unsigned int		offset:13;
-+	unsigned int		mtime;
-+	unsigned int		start_block:24;
-+} __attribute__  ((packed));
-+
-+#define SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n) \
-+	SQUASHFS_MEMSET(s, d, n);\
-+	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
-+	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
-+	SQUASHFS_SWAP((s)->uid, d, 16, 4);\
-+	SQUASHFS_SWAP((s)->guid, d, 20, 4);
-+
-+#define SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, n) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n)\
-+}
-+
-+#define SQUASHFS_SWAP_IPC_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_ipc_inode_header_1));\
-+	SQUASHFS_SWAP((s)->type, d, 24, 4);\
-+	SQUASHFS_SWAP((s)->offset, d, 28, 4);\
-+}
-+
-+#define SQUASHFS_SWAP_DEV_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_dev_inode_header_1));\
-+	SQUASHFS_SWAP((s)->rdev, d, 24, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_symlink_inode_header_1));\
-+	SQUASHFS_SWAP((s)->symlink_size, d, 24, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_REG_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_reg_inode_header_1));\
-+	SQUASHFS_SWAP((s)->mtime, d, 24, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 56, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 88, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INODE_HEADER_1(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
-+			sizeof(struct squashfs_dir_inode_header_1));\
-+	SQUASHFS_SWAP((s)->file_size, d, 24, 19);\
-+	SQUASHFS_SWAP((s)->offset, d, 43, 13);\
-+	SQUASHFS_SWAP((s)->mtime, d, 56, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 88, 24);\
-+}
-+
-+#endif
-+
-+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+
-+struct squashfs_dir_index_2 {
-+	unsigned int		index:27;
-+	unsigned int		start_block:29;
-+	unsigned char		size;
-+	unsigned char		name[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_base_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+} __attribute__ ((packed));
-+
-+struct squashfs_ipc_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+} __attribute__ ((packed));
-+
-+struct squashfs_dev_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned short		rdev;
-+} __attribute__ ((packed));
-+	
-+struct squashfs_symlink_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned short		symlink_size;
-+	char			symlink[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_reg_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned int		mtime;
-+	unsigned int		start_block;
-+	unsigned int		fragment;
-+	unsigned int		offset;
-+	unsigned int		file_size:32;
-+	unsigned short		block_list[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned int		file_size:19;
-+	unsigned int		offset:13;
-+	unsigned int		mtime;
-+	unsigned int		start_block:24;
-+} __attribute__  ((packed));
-+
-+struct squashfs_ldir_inode_header_2 {
-+	unsigned int		inode_type:4;
-+	unsigned int		mode:12; /* protection */
-+	unsigned int		uid:8; /* index into uid table */
-+	unsigned int		guid:8; /* index into guid table */
-+	unsigned int		file_size:27;
-+	unsigned int		offset:13;
-+	unsigned int		mtime;
-+	unsigned int		start_block:24;
-+	unsigned int		i_count:16;
-+	struct squashfs_dir_index_2	index[0];
-+} __attribute__  ((packed));
-+
-+union squashfs_inode_header_2 {
-+	struct squashfs_base_inode_header_2	base;
-+	struct squashfs_dev_inode_header_2	dev;
-+	struct squashfs_symlink_inode_header_2	symlink;
-+	struct squashfs_reg_inode_header_2	reg;
-+	struct squashfs_dir_inode_header_2	dir;
-+	struct squashfs_ldir_inode_header_2	ldir;
-+	struct squashfs_ipc_inode_header_2	ipc;
-+};
-+	
-+struct squashfs_dir_header_2 {
-+	unsigned int		count:8;
-+	unsigned int		start_block:24;
-+} __attribute__ ((packed));
-+
-+struct squashfs_dir_entry_2 {
-+	unsigned int		offset:13;
-+	unsigned int		type:3;
-+	unsigned int		size:8;
-+	char			name[0];
-+} __attribute__ ((packed));
-+
-+struct squashfs_fragment_entry_2 {
-+	unsigned int		start_block;
-+	unsigned int		size;
-+} __attribute__ ((packed));
-+
-+#define SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\
-+	SQUASHFS_MEMSET(s, d, n);\
-+	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
-+	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
-+	SQUASHFS_SWAP((s)->uid, d, 16, 8);\
-+	SQUASHFS_SWAP((s)->guid, d, 24, 8);\
-+
-+#define SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, n) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\
-+}
-+
-+#define SQUASHFS_SWAP_IPC_INODE_HEADER_2(s, d) \
-+	SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, sizeof(struct squashfs_ipc_inode_header_2))
-+
-+#define SQUASHFS_SWAP_DEV_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_dev_inode_header_2)); \
-+	SQUASHFS_SWAP((s)->rdev, d, 32, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_symlink_inode_header_2));\
-+	SQUASHFS_SWAP((s)->symlink_size, d, 32, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_REG_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_reg_inode_header_2));\
-+	SQUASHFS_SWAP((s)->mtime, d, 32, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 64, 32);\
-+	SQUASHFS_SWAP((s)->fragment, d, 96, 32);\
-+	SQUASHFS_SWAP((s)->offset, d, 128, 32);\
-+	SQUASHFS_SWAP((s)->file_size, d, 160, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_dir_inode_header_2));\
-+	SQUASHFS_SWAP((s)->file_size, d, 32, 19);\
-+	SQUASHFS_SWAP((s)->offset, d, 51, 13);\
-+	SQUASHFS_SWAP((s)->mtime, d, 64, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 96, 24);\
-+}
-+
-+#define SQUASHFS_SWAP_LDIR_INODE_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
-+			sizeof(struct squashfs_ldir_inode_header_2));\
-+	SQUASHFS_SWAP((s)->file_size, d, 32, 27);\
-+	SQUASHFS_SWAP((s)->offset, d, 59, 13);\
-+	SQUASHFS_SWAP((s)->mtime, d, 72, 32);\
-+	SQUASHFS_SWAP((s)->start_block, d, 104, 24);\
-+	SQUASHFS_SWAP((s)->i_count, d, 128, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INDEX_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index_2));\
-+	SQUASHFS_SWAP((s)->index, d, 0, 27);\
-+	SQUASHFS_SWAP((s)->start_block, d, 27, 29);\
-+	SQUASHFS_SWAP((s)->size, d, 56, 8);\
-+}
-+#define SQUASHFS_SWAP_DIR_HEADER_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header_2));\
-+	SQUASHFS_SWAP((s)->count, d, 0, 8);\
-+	SQUASHFS_SWAP((s)->start_block, d, 8, 24);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_ENTRY_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry_2));\
-+	SQUASHFS_SWAP((s)->offset, d, 0, 13);\
-+	SQUASHFS_SWAP((s)->type, d, 13, 3);\
-+	SQUASHFS_SWAP((s)->size, d, 16, 8);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_ENTRY_2(s, d) {\
-+	SQUASHFS_SWAP_START\
-+	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry_2));\
-+	SQUASHFS_SWAP((s)->start_block, d, 0, 32);\
-+	SQUASHFS_SWAP((s)->size, d, 32, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_INDEXES_2(s, d, n) SQUASHFS_SWAP_INTS(s, d, n)
-+
-+/* fragment and fragment table defines */
-+#define SQUASHFS_FRAGMENT_BYTES_2(A)	(A * sizeof(struct squashfs_fragment_entry_2))
-+
-+#define SQUASHFS_FRAGMENT_INDEX_2(A)	(SQUASHFS_FRAGMENT_BYTES_2(A) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEX_OFFSET_2(A)	(SQUASHFS_FRAGMENT_BYTES_2(A) % \
-+						SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEXES_2(A)	((SQUASHFS_FRAGMENT_BYTES_2(A) + \
-+					SQUASHFS_METADATA_SIZE - 1) / \
-+					SQUASHFS_METADATA_SIZE)
-+
-+#define SQUASHFS_FRAGMENT_INDEX_BYTES_2(A)	(SQUASHFS_FRAGMENT_INDEXES_2(A) *\
-+						sizeof(int))
-+
-+#endif
-+
-+#ifdef __KERNEL__
-+
-+/*
-+ * macros used to swap each structure entry, taking into account
-+ * bitfields and different bitfield placing conventions on differing
-+ * architectures
-+ */
-+
-+#include <asm/byteorder.h>
-+
-+#ifdef __BIG_ENDIAN
-+	/* convert from little endian to big endian */
-+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \
-+		tbits, b_pos)
-+#else
-+	/* convert from big endian to little endian */ 
-+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \
-+		tbits, 64 - tbits - b_pos)
-+#endif
-+
-+#define _SQUASHFS_SWAP(value, p, pos, tbits, SHIFT) {\
-+	b_pos = pos % 8;\
-+	val = 0;\
-+	s = (unsigned char *)p + (pos / 8);\
-+	d = ((unsigned char *) &val) + 7;\
-+	for(bits = 0; bits < (tbits + b_pos); bits += 8) \
-+		*d-- = *s++;\
-+	value = (val >> (SHIFT))/* & ((1 << tbits) - 1)*/;\
-+}
-+
-+#define SQUASHFS_MEMSET(s, d, n)	memset(s, 0, n);
-+
-+#endif
-+#endif
-diff --new-file -urp linux-2.6.15/include/linux/squashfs_fs_i.h linux-2.6.15-squashfs3.0/include/linux/squashfs_fs_i.h
---- linux-2.6.15/include/linux/squashfs_fs_i.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-squashfs3.0/include/linux/squashfs_fs_i.h	2006-03-07 21:12:37.000000000 +0000
-@@ -0,0 +1,45 @@
-+#ifndef SQUASHFS_FS_I
-+#define SQUASHFS_FS_I
-+/*
-+ * Squashfs
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006
-+ * Phillip Lougher <phillip@lougher.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs_fs_i.h
-+ */
-+
-+struct squashfs_inode_info {
-+	long long	start_block;
-+	unsigned int	offset;
-+	union {
-+		struct {
-+			long long	fragment_start_block;
-+			unsigned int	fragment_size;
-+			unsigned int	fragment_offset;
-+			long long	block_list_start;
-+		} s1;
-+		struct {
-+			long long	directory_index_start;
-+			unsigned int	directory_index_offset;
-+			unsigned int	directory_index_count;
-+			unsigned int	parent_inode;
-+		} s2;
-+	} u;
-+	struct inode	vfs_inode;
-+};
-+#endif
-diff --new-file -urp linux-2.6.15/include/linux/squashfs_fs_sb.h linux-2.6.15-squashfs3.0/include/linux/squashfs_fs_sb.h
---- linux-2.6.15/include/linux/squashfs_fs_sb.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-squashfs3.0/include/linux/squashfs_fs_sb.h	2006-03-07 21:12:37.000000000 +0000
-@@ -0,0 +1,74 @@
-+#ifndef SQUASHFS_FS_SB
-+#define SQUASHFS_FS_SB
-+/*
-+ * Squashfs
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006
-+ * Phillip Lougher <phillip@lougher.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs_fs_sb.h
-+ */
-+
-+#include <linux/squashfs_fs.h>
-+
-+struct squashfs_cache {
-+	long long	block;
-+	int		length;
-+	long long	next_index;
-+	char		*data;
-+};
-+
-+struct squashfs_fragment_cache {
-+	long long	block;
-+	int		length;
-+	unsigned int	locked;
-+	char		*data;
-+};
-+
-+struct squashfs_sb_info {
-+	struct squashfs_super_block	sblk;
-+	int			devblksize;
-+	int			devblksize_log2;
-+	int			swap;
-+	struct squashfs_cache	*block_cache;
-+	struct squashfs_fragment_cache	*fragment;
-+	int			next_cache;
-+	int			next_fragment;
-+	int			next_meta_index;
-+	unsigned int		*uid;
-+	unsigned int		*guid;
-+	long long		*fragment_index;
-+	unsigned int		*fragment_index_2;
-+	unsigned int		read_size;
-+	char			*read_data;
-+	char			*read_page;
-+	struct semaphore	read_data_mutex;
-+	struct semaphore	read_page_mutex;
-+	struct semaphore	block_cache_mutex;
-+	struct semaphore	fragment_mutex;
-+	struct semaphore	meta_index_mutex;
-+	wait_queue_head_t	waitq;
-+	wait_queue_head_t	fragment_wait_queue;
-+	struct meta_index	*meta_index;
-+	struct inode		*(*iget)(struct super_block *s,  squashfs_inode_t \
-+				inode);
-+	long long		(*read_blocklist)(struct inode *inode, int \
-+				index, int readahead_blks, char *block_list, \
-+				unsigned short **block_p, unsigned int *bsize);
-+	int			(*read_fragment_index_table)(struct super_block *s);
-+};
-+#endif
-diff --new-file -urp linux-2.6.15/init/do_mounts_rd.c linux-2.6.15-squashfs3.0/init/do_mounts_rd.c
---- linux-2.6.15/init/do_mounts_rd.c	2006-03-01 22:37:27.000000000 +0000
-+++ linux-2.6.15-squashfs3.0/init/do_mounts_rd.c	2006-03-07 21:12:37.000000000 +0000
-@@ -5,6 +5,7 @@
- #include <linux/ext2_fs.h>
- #include <linux/romfs_fs.h>
- #include <linux/cramfs_fs.h>
-+#include <linux/squashfs_fs.h>
- #include <linux/initrd.h>
- #include <linux/string.h>
- 
-@@ -39,6 +40,7 @@ static int __init crd_load(int in_fd, in
-  * numbers could not be found.
-  *
-  * We currently check for the following magic numbers:
-+ *      squashfs
-  * 	minix
-  * 	ext2
-  *	romfs
-@@ -53,6 +55,7 @@ identify_ramdisk_image(int fd, int start
- 	struct ext2_super_block *ext2sb;
- 	struct romfs_super_block *romfsb;
- 	struct cramfs_super *cramfsb;
-+	struct squashfs_super_block *squashfsb;
- 	int nblocks = -1;
- 	unsigned char *buf;
- 
-@@ -64,6 +67,7 @@ identify_ramdisk_image(int fd, int start
- 	ext2sb = (struct ext2_super_block *) buf;
- 	romfsb = (struct romfs_super_block *) buf;
- 	cramfsb = (struct cramfs_super *) buf;
-+	squashfsb = (struct squashfs_super_block *) buf;
- 	memset(buf, 0xe5, size);
- 
- 	/*
-@@ -101,6 +105,15 @@ identify_ramdisk_image(int fd, int start
- 		goto done;
- 	}
- 
-+	/* squashfs is at block zero too */
-+	if (squashfsb->s_magic == SQUASHFS_MAGIC) {
-+		printk(KERN_NOTICE
-+		       "RAMDISK: squashfs filesystem found at block %d\n",
-+		       start_block);
-+		nblocks = (squashfsb->bytes_used+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
-+		goto done;
-+	}
-+
- 	/*
- 	 * Read block 1 to test for minix and ext2 superblock
- 	 */
diff --git a/openwrt/target/linux/generic-2.6/patches/002-squashfs_lzma.patch b/openwrt/target/linux/generic-2.6/patches/002-squashfs_lzma.patch
deleted file mode 100644
index a166e84971..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/002-squashfs_lzma.patch
+++ /dev/null
@@ -1,886 +0,0 @@
-diff -Nur linux-2.6.16/fs/squashfs/inode.c linux-2.6.16-owrt/fs/squashfs/inode.c
---- linux-2.6.16/fs/squashfs/inode.c	2006-03-21 10:55:59.000000000 +0100
-+++ linux-2.6.16-owrt/fs/squashfs/inode.c	2006-03-21 12:24:37.000000000 +0100
-@@ -4,6 +4,9 @@
-  * Copyright (c) 2002, 2003, 2004, 2005, 2006
-  * Phillip Lougher <phillip@lougher.org.uk>
-  *
-+ * LZMA decompressor support added by Oleg I. Vdovikin
-+ * Copyright (c) 2005 Oleg I.Vdovikin <oleg@cs.msu.su>
-+ *
-  * This program is free software; you can redistribute it and/or
-  * modify it under the terms of the GNU General Public License
-  * as published by the Free Software Foundation; either version 2,
-@@ -21,6 +24,7 @@
-  * inode.c
-  */
- 
-+#define SQUASHFS_LZMA
- #include <linux/types.h>
- #include <linux/squashfs_fs.h>
- #include <linux/module.h>
-@@ -44,6 +48,19 @@
- 
- #include "squashfs.h"
- 
-+#ifdef SQUASHFS_LZMA
-+#include "LzmaDecode.h"
-+
-+/* default LZMA settings, should be in sync with mksquashfs */
-+#define LZMA_LC 3
-+#define LZMA_LP 0
-+#define LZMA_PB 2
-+
-+#define LZMA_WORKSPACE_SIZE ((LZMA_BASE_SIZE + \
-+      (LZMA_LIT_SIZE << (LZMA_LC + LZMA_LP))) * sizeof(CProb))
-+
-+#endif
-+
- static void squashfs_put_super(struct super_block *);
- static int squashfs_statfs(struct super_block *, struct kstatfs *);
- static int squashfs_symlink_readpage(struct file *file, struct page *page);
-@@ -64,7 +81,11 @@
- 				const char *, void *);
- 
- 
-+#ifdef SQUASHFS_LZMA
-+static unsigned char lzma_workspace[LZMA_WORKSPACE_SIZE];
-+#else
- static z_stream stream;
-+#endif
- 
- static struct file_system_type squashfs_fs_type = {
- 	.owner = THIS_MODULE,
-@@ -249,6 +270,15 @@
- 	if (compressed) {
- 		int zlib_err;
- 
-+#ifdef SQUASHFS_LZMA
-+		if ((zlib_err = LzmaDecode(lzma_workspace, 
-+			LZMA_WORKSPACE_SIZE, LZMA_LC, LZMA_LP, LZMA_PB, 
-+			c_buffer, c_byte, buffer, msblk->read_size, &bytes)) != LZMA_RESULT_OK)
-+		{
-+			ERROR("lzma returned unexpected result 0x%x\n", zlib_err);
-+			bytes = 0;
-+		}
-+#else
- 		stream.next_in = c_buffer;
- 		stream.avail_in = c_byte;
- 		stream.next_out = buffer;
-@@ -263,6 +293,7 @@
- 			bytes = 0;
- 		} else
- 			bytes = stream.total_out;
-+#endif
- 		
- 		up(&msblk->read_data_mutex);
- 	}
-@@ -2046,15 +2077,19 @@
- 	printk(KERN_INFO "squashfs: version 3.0 (2006/03/15) "
- 		"Phillip Lougher\n");
- 
-+#ifndef SQUASHFS_LZMA
- 	if (!(stream.workspace = vmalloc(zlib_inflate_workspacesize()))) {
- 		ERROR("Failed to allocate zlib workspace\n");
- 		destroy_inodecache();
- 		err = -ENOMEM;
- 		goto out;
- 	}
-+#endif
- 
- 	if ((err = register_filesystem(&squashfs_fs_type))) {
-+#ifndef SQUASHFS_LZMA
- 		vfree(stream.workspace);
-+#endif
- 		destroy_inodecache();
- 	}
- 
-@@ -2065,7 +2100,9 @@
- 
- static void __exit exit_squashfs_fs(void)
- {
-+#ifndef SQUASHFS_LZMA
- 	vfree(stream.workspace);
-+#endif
- 	unregister_filesystem(&squashfs_fs_type);
- 	destroy_inodecache();
- }
-diff -Nur linux-2.6.16/fs/squashfs/LzmaDecode.c linux-2.6.16-owrt/fs/squashfs/LzmaDecode.c
---- linux-2.6.16/fs/squashfs/LzmaDecode.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/fs/squashfs/LzmaDecode.c	2006-03-21 10:56:57.000000000 +0100
-@@ -0,0 +1,663 @@
-+/*
-+  LzmaDecode.c
-+  LZMA Decoder
-+  
-+  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
-+  http://www.7-zip.org/
-+
-+  LZMA SDK is licensed under two licenses:
-+  1) GNU Lesser General Public License (GNU LGPL)
-+  2) Common Public License (CPL)
-+  It means that you can select one of these two licenses and 
-+  follow rules of that license.
-+
-+  SPECIAL EXCEPTION:
-+  Igor Pavlov, as the author of this code, expressly permits you to 
-+  statically or dynamically link your code (or bind by name) to the 
-+  interfaces of this file without subjecting your linked code to the 
-+  terms of the CPL or GNU LGPL. Any modifications or additions 
-+  to this file, however, are subject to the LGPL or CPL terms.
-+*/
-+
-+#include "LzmaDecode.h"
-+
-+#ifndef Byte
-+#define Byte unsigned char
-+#endif
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+
-+typedef struct _CRangeDecoder
-+{
-+  Byte *Buffer;
-+  Byte *BufferLim;
-+  UInt32 Range;
-+  UInt32 Code;
-+  #ifdef _LZMA_IN_CB
-+  ILzmaInCallback *InCallback;
-+  int Result;
-+  #endif
-+  int ExtraBytes;
-+} CRangeDecoder;
-+
-+Byte RangeDecoderReadByte(CRangeDecoder *rd)
-+{
-+  if (rd->Buffer == rd->BufferLim)
-+  {
-+    #ifdef _LZMA_IN_CB
-+    UInt32 size;
-+    rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
-+    rd->BufferLim = rd->Buffer + size;
-+    if (size == 0)
-+    #endif
-+    {
-+      rd->ExtraBytes = 1;
-+      return 0xFF;
-+    }
-+  }
-+  return (*rd->Buffer++);
-+}
-+
-+/* #define ReadByte (*rd->Buffer++) */
-+#define ReadByte (RangeDecoderReadByte(rd))
-+
-+void RangeDecoderInit(CRangeDecoder *rd,
-+  #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *inCallback
-+  #else
-+    Byte *stream, UInt32 bufferSize
-+  #endif
-+    )
-+{
-+  int i;
-+  #ifdef _LZMA_IN_CB
-+  rd->InCallback = inCallback;
-+  rd->Buffer = rd->BufferLim = 0;
-+  #else
-+  rd->Buffer = stream;
-+  rd->BufferLim = stream + bufferSize;
-+  #endif
-+  rd->ExtraBytes = 0;
-+  rd->Code = 0;
-+  rd->Range = (0xFFFFFFFF);
-+  for(i = 0; i < 5; i++)
-+    rd->Code = (rd->Code << 8) | ReadByte;
-+}
-+
-+#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;        
-+#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
-+#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
-+
-+UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
-+{
-+  RC_INIT_VAR
-+  UInt32 result = 0;
-+  int i;
-+  for (i = numTotalBits; i > 0; i--)
-+  {
-+    /* UInt32 t; */
-+    range >>= 1;
-+
-+    result <<= 1;
-+    if (code >= range)
-+    {
-+      code -= range;
-+      result |= 1;
-+    }
-+    /*
-+    t = (code - range) >> 31;
-+    t &= 1;
-+    code -= range & (t - 1);
-+    result = (result + result) | (1 - t);
-+    */
-+    RC_NORMALIZE
-+  }
-+  RC_FLUSH_VAR
-+  return result;
-+}
-+
-+int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
-+{
-+  UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
-+  if (rd->Code < bound)
-+  {
-+    rd->Range = bound;
-+    *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
-+    if (rd->Range < kTopValue)
-+    {
-+      rd->Code = (rd->Code << 8) | ReadByte;
-+      rd->Range <<= 8;
-+    }
-+    return 0;
-+  }
-+  else
-+  {
-+    rd->Range -= bound;
-+    rd->Code -= bound;
-+    *prob -= (*prob) >> kNumMoveBits;
-+    if (rd->Range < kTopValue)
-+    {
-+      rd->Code = (rd->Code << 8) | ReadByte;
-+      rd->Range <<= 8;
-+    }
-+    return 1;
-+  }
-+}
-+
-+#define RC_GET_BIT2(prob, mi, A0, A1) \
-+  UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
-+  if (code < bound) \
-+    { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
-+  else \
-+    { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
-+  RC_NORMALIZE
-+
-+#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)               
-+
-+int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
-+{
-+  int mi = 1;
-+  int i;
-+  #ifdef _LZMA_LOC_OPT
-+  RC_INIT_VAR
-+  #endif
-+  for(i = numLevels; i > 0; i--)
-+  {
-+    #ifdef _LZMA_LOC_OPT
-+    CProb *prob = probs + mi;
-+    RC_GET_BIT(prob, mi)
-+    #else
-+    mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
-+    #endif
-+  }
-+  #ifdef _LZMA_LOC_OPT
-+  RC_FLUSH_VAR
-+  #endif
-+  return mi - (1 << numLevels);
-+}
-+
-+int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
-+{
-+  int mi = 1;
-+  int i;
-+  int symbol = 0;
-+  #ifdef _LZMA_LOC_OPT
-+  RC_INIT_VAR
-+  #endif
-+  for(i = 0; i < numLevels; i++)
-+  {
-+    #ifdef _LZMA_LOC_OPT
-+    CProb *prob = probs + mi;
-+    RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
-+    #else
-+    int bit = RangeDecoderBitDecode(probs + mi, rd);
-+    mi = mi + mi + bit;
-+    symbol |= (bit << i);
-+    #endif
-+  }
-+  #ifdef _LZMA_LOC_OPT
-+  RC_FLUSH_VAR
-+  #endif
-+  return symbol;
-+}
-+
-+Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
-+{ 
-+  int symbol = 1;
-+  #ifdef _LZMA_LOC_OPT
-+  RC_INIT_VAR
-+  #endif
-+  do
-+  {
-+    #ifdef _LZMA_LOC_OPT
-+    CProb *prob = probs + symbol;
-+    RC_GET_BIT(prob, symbol)
-+    #else
-+    symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
-+    #endif
-+  }
-+  while (symbol < 0x100);
-+  #ifdef _LZMA_LOC_OPT
-+  RC_FLUSH_VAR
-+  #endif
-+  return symbol;
-+}
-+
-+Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
-+{ 
-+  int symbol = 1;
-+  #ifdef _LZMA_LOC_OPT
-+  RC_INIT_VAR
-+  #endif
-+  do
-+  {
-+    int bit;
-+    int matchBit = (matchByte >> 7) & 1;
-+    matchByte <<= 1;
-+    #ifdef _LZMA_LOC_OPT
-+    {
-+      CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
-+      RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
-+    }
-+    #else
-+    bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
-+    symbol = (symbol << 1) | bit;
-+    #endif
-+    if (matchBit != bit)
-+    {
-+      while (symbol < 0x100)
-+      {
-+        #ifdef _LZMA_LOC_OPT
-+        CProb *prob = probs + symbol;
-+        RC_GET_BIT(prob, symbol)
-+        #else
-+        symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
-+        #endif
-+      }
-+      break;
-+    }
-+  }
-+  while (symbol < 0x100);
-+  #ifdef _LZMA_LOC_OPT
-+  RC_FLUSH_VAR
-+  #endif
-+  return symbol;
-+}
-+
-+#define kNumPosBitsMax 4
-+#define kNumPosStatesMax (1 << kNumPosBitsMax)
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define LenChoice 0
-+#define LenChoice2 (LenChoice + 1)
-+#define LenLow (LenChoice2 + 1)
-+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
-+
-+int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
-+{
-+  if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
-+    return RangeDecoderBitTreeDecode(p + LenLow +
-+        (posState << kLenNumLowBits), kLenNumLowBits, rd);
-+  if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
-+    return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
-+        (posState << kLenNumMidBits), kLenNumMidBits, rd);
-+  return kLenNumLowSymbols + kLenNumMidSymbols + 
-+      RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
-+}
-+
-+#define kNumStates 12
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#define kNumPosSlotBits 6
-+#define kNumLenToPosStates 4
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+
-+#define kMatchMinLen 2
-+
-+#define IsMatch 0
-+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-+#define IsRepG0 (IsRep + kNumStates)
-+#define IsRepG1 (IsRepG0 + kNumStates)
-+#define IsRepG2 (IsRepG1 + kNumStates)
-+#define IsRep0Long (IsRepG2 + kNumStates)
-+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-+#define LenCoder (Align + kAlignTableSize)
-+#define RepLenCoder (LenCoder + kNumLenProbs)
-+#define Literal (RepLenCoder + kNumLenProbs)
-+
-+#if Literal != LZMA_BASE_SIZE
-+StopCompilingDueBUG
-+#endif
-+
-+#ifdef _LZMA_OUT_READ
-+
-+typedef struct _LzmaVarState
-+{
-+  CRangeDecoder RangeDecoder;
-+  Byte *Dictionary;
-+  UInt32 DictionarySize;
-+  UInt32 DictionaryPos;
-+  UInt32 GlobalPos;
-+  UInt32 Reps[4];
-+  int lc;
-+  int lp;
-+  int pb;
-+  int State;
-+  int PreviousIsMatch;
-+  int RemainLen;
-+} LzmaVarState;
-+
-+int LzmaDecoderInit(
-+    unsigned char *buffer, UInt32 bufferSize,
-+    int lc, int lp, int pb,
-+    unsigned char *dictionary, UInt32 dictionarySize,
-+    #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *inCallback
-+    #else
-+    unsigned char *inStream, UInt32 inSize
-+    #endif
-+    )
-+{
-+  LzmaVarState *vs = (LzmaVarState *)buffer;
-+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
-+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
-+  UInt32 i;
-+  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
-+    return LZMA_RESULT_NOT_ENOUGH_MEM;
-+  vs->Dictionary = dictionary;
-+  vs->DictionarySize = dictionarySize;
-+  vs->DictionaryPos = 0;
-+  vs->GlobalPos = 0;
-+  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
-+  vs->lc = lc;
-+  vs->lp = lp;
-+  vs->pb = pb;
-+  vs->State = 0;
-+  vs->PreviousIsMatch = 0;
-+  vs->RemainLen = 0;
-+  dictionary[dictionarySize - 1] = 0;
-+  for (i = 0; i < numProbs; i++)
-+    p[i] = kBitModelTotal >> 1; 
-+  RangeDecoderInit(&vs->RangeDecoder, 
-+      #ifdef _LZMA_IN_CB
-+      inCallback
-+      #else
-+      inStream, inSize
-+      #endif
-+  );
-+  return LZMA_RESULT_OK;
-+}
-+
-+int LzmaDecode(unsigned char *buffer, 
-+    unsigned char *outStream, UInt32 outSize,
-+    UInt32 *outSizeProcessed)
-+{
-+  LzmaVarState *vs = (LzmaVarState *)buffer;
-+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
-+  CRangeDecoder rd = vs->RangeDecoder;
-+  int state = vs->State;
-+  int previousIsMatch = vs->PreviousIsMatch;
-+  Byte previousByte;
-+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
-+  UInt32 nowPos = 0;
-+  UInt32 posStateMask = (1 << (vs->pb)) - 1;
-+  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
-+  int lc = vs->lc;
-+  int len = vs->RemainLen;
-+  UInt32 globalPos = vs->GlobalPos;
-+
-+  Byte *dictionary = vs->Dictionary;
-+  UInt32 dictionarySize = vs->DictionarySize;
-+  UInt32 dictionaryPos = vs->DictionaryPos;
-+
-+  if (len == -1)
-+  {
-+    *outSizeProcessed = 0;
-+    return LZMA_RESULT_OK;
-+  }
-+
-+  while(len > 0 && nowPos < outSize)
-+  {
-+    UInt32 pos = dictionaryPos - rep0;
-+    if (pos >= dictionarySize)
-+      pos += dictionarySize;
-+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
-+    if (++dictionaryPos == dictionarySize)
-+      dictionaryPos = 0;
-+    len--;
-+  }
-+  if (dictionaryPos == 0)
-+    previousByte = dictionary[dictionarySize - 1];
-+  else
-+    previousByte = dictionary[dictionaryPos - 1];
-+#else
-+
-+int LzmaDecode(
-+    Byte *buffer, UInt32 bufferSize,
-+    int lc, int lp, int pb,
-+    #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *inCallback,
-+    #else
-+    unsigned char *inStream, UInt32 inSize,
-+    #endif
-+    unsigned char *outStream, UInt32 outSize,
-+    UInt32 *outSizeProcessed)
-+{
-+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
-+  CProb *p = (CProb *)buffer;
-+  CRangeDecoder rd;
-+  UInt32 i;
-+  int state = 0;
-+  int previousIsMatch = 0;
-+  Byte previousByte = 0;
-+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
-+  UInt32 nowPos = 0;
-+  UInt32 posStateMask = (1 << pb) - 1;
-+  UInt32 literalPosMask = (1 << lp) - 1;
-+  int len = 0;
-+  if (bufferSize < numProbs * sizeof(CProb))
-+    return LZMA_RESULT_NOT_ENOUGH_MEM;
-+  for (i = 0; i < numProbs; i++)
-+    p[i] = kBitModelTotal >> 1; 
-+  RangeDecoderInit(&rd, 
-+      #ifdef _LZMA_IN_CB
-+      inCallback
-+      #else
-+      inStream, inSize
-+      #endif
-+      );
-+#endif
-+
-+  *outSizeProcessed = 0;
-+  while(nowPos < outSize)
-+  {
-+    int posState = (int)(
-+        (nowPos 
-+        #ifdef _LZMA_OUT_READ
-+        + globalPos
-+        #endif
-+        )
-+        & posStateMask);
-+    #ifdef _LZMA_IN_CB
-+    if (rd.Result != LZMA_RESULT_OK)
-+      return rd.Result;
-+    #endif
-+    if (rd.ExtraBytes != 0)
-+      return LZMA_RESULT_DATA_ERROR;
-+    if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
-+    {
-+      CProb *probs = p + Literal + (LZMA_LIT_SIZE * 
-+        (((
-+        (nowPos 
-+        #ifdef _LZMA_OUT_READ
-+        + globalPos
-+        #endif
-+        )
-+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-+
-+      if (state < 4) state = 0;
-+      else if (state < 10) state -= 3;
-+      else state -= 6;
-+      if (previousIsMatch)
-+      {
-+        Byte matchByte;
-+        #ifdef _LZMA_OUT_READ
-+        UInt32 pos = dictionaryPos - rep0;
-+        if (pos >= dictionarySize)
-+          pos += dictionarySize;
-+        matchByte = dictionary[pos];
-+        #else
-+        matchByte = outStream[nowPos - rep0];
-+        #endif
-+        previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
-+        previousIsMatch = 0;
-+      }
-+      else
-+        previousByte = LzmaLiteralDecode(probs, &rd);
-+      outStream[nowPos++] = previousByte;
-+      #ifdef _LZMA_OUT_READ
-+      dictionary[dictionaryPos] = previousByte;
-+      if (++dictionaryPos == dictionarySize)
-+        dictionaryPos = 0;
-+      #endif
-+    }
-+    else             
-+    {
-+      previousIsMatch = 1;
-+      if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
-+      {
-+        if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
-+        {
-+          if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
-+          {
-+            #ifdef _LZMA_OUT_READ
-+            UInt32 pos;
-+            #endif
-+            if (
-+               (nowPos 
-+                #ifdef _LZMA_OUT_READ
-+                + globalPos
-+                #endif
-+               )
-+               == 0)
-+              return LZMA_RESULT_DATA_ERROR;
-+            state = state < 7 ? 9 : 11;
-+            #ifdef _LZMA_OUT_READ
-+            pos = dictionaryPos - rep0;
-+            if (pos >= dictionarySize)
-+              pos += dictionarySize;
-+            previousByte = dictionary[pos];
-+            dictionary[dictionaryPos] = previousByte;
-+            if (++dictionaryPos == dictionarySize)
-+              dictionaryPos = 0;
-+            #else
-+            previousByte = outStream[nowPos - rep0];
-+            #endif
-+            outStream[nowPos++] = previousByte;
-+            continue;
-+          }
-+        }
-+        else
-+        {
-+          UInt32 distance;
-+          if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
-+            distance = rep1;
-+          else 
-+          {
-+            if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
-+              distance = rep2;
-+            else
-+            {
-+              distance = rep3;
-+              rep3 = rep2;
-+            }
-+            rep2 = rep1;
-+          }
-+          rep1 = rep0;
-+          rep0 = distance;
-+        }
-+        len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
-+        state = state < 7 ? 8 : 11;
-+      }
-+      else
-+      {
-+        int posSlot;
-+        rep3 = rep2;
-+        rep2 = rep1;
-+        rep1 = rep0;
-+        state = state < 7 ? 7 : 10;
-+        len = LzmaLenDecode(p + LenCoder, &rd, posState);
-+        posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
-+            kNumPosSlotBits), kNumPosSlotBits, &rd);
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          int numDirectBits = ((posSlot >> 1) - 1);
-+          rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            rep0 += RangeDecoderReverseBitTreeDecode(
-+                p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
-+          }
-+          else
-+          {
-+            rep0 += RangeDecoderDecodeDirectBits(&rd, 
-+                numDirectBits - kNumAlignBits) << kNumAlignBits;
-+            rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
-+          }
-+        }
-+        else
-+          rep0 = posSlot;
-+        rep0++;
-+      }
-+      if (rep0 == (UInt32)(0))
-+      {
-+        /* it's for stream version */
-+        len = -1;
-+        break;
-+      }
-+      if (rep0 > nowPos 
-+        #ifdef _LZMA_OUT_READ
-+        + globalPos
-+        #endif
-+        )
-+      {
-+        return LZMA_RESULT_DATA_ERROR;
-+      }
-+      len += kMatchMinLen;
-+      do
-+      {
-+        #ifdef _LZMA_OUT_READ
-+        UInt32 pos = dictionaryPos - rep0;
-+        if (pos >= dictionarySize)
-+          pos += dictionarySize;
-+        previousByte = dictionary[pos];
-+        dictionary[dictionaryPos] = previousByte;
-+        if (++dictionaryPos == dictionarySize)
-+          dictionaryPos = 0;
-+        #else
-+        previousByte = outStream[nowPos - rep0];
-+        #endif
-+        outStream[nowPos++] = previousByte;
-+        len--;
-+      }
-+      while(len > 0 && nowPos < outSize);
-+    }
-+  }
-+
-+  #ifdef _LZMA_OUT_READ
-+  vs->RangeDecoder = rd;
-+  vs->DictionaryPos = dictionaryPos;
-+  vs->GlobalPos = globalPos + nowPos;
-+  vs->Reps[0] = rep0;
-+  vs->Reps[1] = rep1;
-+  vs->Reps[2] = rep2;
-+  vs->Reps[3] = rep3;
-+  vs->State = state;
-+  vs->PreviousIsMatch = previousIsMatch;
-+  vs->RemainLen = len;
-+  #endif
-+
-+  *outSizeProcessed = nowPos;
-+  return LZMA_RESULT_OK;
-+}
-diff -Nur linux-2.6.16/fs/squashfs/LzmaDecode.h linux-2.6.16-owrt/fs/squashfs/LzmaDecode.h
---- linux-2.6.16/fs/squashfs/LzmaDecode.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/fs/squashfs/LzmaDecode.h	2006-03-21 10:56:57.000000000 +0100
-@@ -0,0 +1,100 @@
-+/* 
-+  LzmaDecode.h
-+  LZMA Decoder interface
-+
-+  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
-+  http://www.7-zip.org/
-+
-+  LZMA SDK is licensed under two licenses:
-+  1) GNU Lesser General Public License (GNU LGPL)
-+  2) Common Public License (CPL)
-+  It means that you can select one of these two licenses and 
-+  follow rules of that license.
-+
-+  SPECIAL EXCEPTION:
-+  Igor Pavlov, as the author of this code, expressly permits you to 
-+  statically or dynamically link your code (or bind by name) to the 
-+  interfaces of this file without subjecting your linked code to the 
-+  terms of the CPL or GNU LGPL. Any modifications or additions 
-+  to this file, however, are subject to the LGPL or CPL terms.
-+*/
-+
-+#ifndef __LZMADECODE_H
-+#define __LZMADECODE_H
-+
-+/* #define _LZMA_IN_CB */
-+/* Use callback for input data */
-+
-+/* #define _LZMA_OUT_READ */
-+/* Use read function for output data */
-+
-+/* #define _LZMA_PROB32 */
-+/* It can increase speed on some 32-bit CPUs, 
-+   but memory usage will be doubled in that case */
-+
-+/* #define _LZMA_LOC_OPT */
-+/* Enable local speed optimizations inside code */
-+
-+#ifndef UInt32
-+#ifdef _LZMA_UINT32_IS_ULONG
-+#define UInt32 unsigned long
-+#else
-+#define UInt32 unsigned int
-+#endif
-+#endif
-+
-+#ifdef _LZMA_PROB32
-+#define CProb UInt32
-+#else
-+#define CProb unsigned short
-+#endif
-+
-+#define LZMA_RESULT_OK 0
-+#define LZMA_RESULT_DATA_ERROR 1
-+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
-+
-+#ifdef _LZMA_IN_CB
-+typedef struct _ILzmaInCallback
-+{
-+  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
-+} ILzmaInCallback;
-+#endif
-+
-+#define LZMA_BASE_SIZE 1846
-+#define LZMA_LIT_SIZE 768
-+
-+/* 
-+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
-+bufferSize += 100 in case of _LZMA_OUT_READ
-+by default CProb is unsigned short, 
-+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
-+*/
-+
-+#ifdef _LZMA_OUT_READ
-+int LzmaDecoderInit(
-+    unsigned char *buffer, UInt32 bufferSize,
-+    int lc, int lp, int pb,
-+    unsigned char *dictionary, UInt32 dictionarySize,
-+  #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *inCallback
-+  #else
-+    unsigned char *inStream, UInt32 inSize
-+  #endif
-+);
-+#endif
-+
-+int LzmaDecode(
-+    unsigned char *buffer, 
-+  #ifndef _LZMA_OUT_READ
-+    UInt32 bufferSize,
-+    int lc, int lp, int pb,
-+  #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *inCallback,
-+  #else
-+    unsigned char *inStream, UInt32 inSize,
-+  #endif
-+  #endif
-+    unsigned char *outStream, UInt32 outSize,
-+    UInt32 *outSizeProcessed);
-+
-+#endif
-diff -Nur linux-2.6.16/fs/squashfs/Makefile linux-2.6.16-owrt/fs/squashfs/Makefile
---- linux-2.6.16/fs/squashfs/Makefile	2006-03-21 10:55:59.000000000 +0100
-+++ linux-2.6.16-owrt/fs/squashfs/Makefile	2006-03-21 10:57:08.000000000 +0100
-@@ -5,3 +5,4 @@
- obj-$(CONFIG_SQUASHFS) += squashfs.o
- squashfs-y += inode.o
- squashfs-y += squashfs2_0.o
-+squashfs-y += LzmaDecode.o
diff --git a/openwrt/target/linux/generic-2.6/patches/004-extra_optimization.patch b/openwrt/target/linux/generic-2.6/patches/004-extra_optimization.patch
deleted file mode 100644
index 805d2f0ea9..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/004-extra_optimization.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- linux-2.6.12.5/Makefile.old	2005-10-23 22:56:29.017270000 +0200
-+++ linux-2.6.12.5/Makefile	2005-10-23 22:57:23.226138500 +0200
-@@ -533,6 +533,9 @@
- NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
- CHECKFLAGS     += $(NOSTDINC_FLAGS)
- 
-+# improve gcc optimization
-+CFLAGS += $(call cc-option,-funit-at-a-time,)
-+
- # warn about C99 declaration after statement
- CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
- 
diff --git a/openwrt/target/linux/generic-2.6/patches/005-gcc4_fix.patch b/openwrt/target/linux/generic-2.6/patches/005-gcc4_fix.patch
deleted file mode 100644
index 72df58184d..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/005-gcc4_fix.patch
+++ /dev/null
@@ -1,197 +0,0 @@
-diff -ruN linux-2.6.15.1/include/asm-i386/libgcc.h linux-2.6.15.1-openwrt/include/asm-i386/libgcc.h
---- linux-2.6.15.1/include/asm-i386/libgcc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15.1-openwrt/include/asm-i386/libgcc.h	2006-02-01 15:47:53.000000000 +0100
-@@ -0,0 +1,8 @@
-+#ifndef __ASM_LIBGCC_H
-+#define __ASM_LIBGCC_H
-+
-+#undef ARCH_NEEDS_ashldi3
-+#undef ARCH_NEEDS_ashrdi3
-+#undef ARCH_NEEDS_lshrdi3
-+
-+#endif /* __ASM_LIBGCC_H */
-diff -Nur linux-2.6.15.1/include/asm-mips/libgcc.h linux-2.6.15.1-openwrt/include/asm-mips/libgcc.h
---- linux-2.6.15.1/include/asm-mips/libgcc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15.1-openwrt/include/asm-mips/libgcc.h	2006-01-20 10:32:28.000000000 +0100
-@@ -0,0 +1,8 @@
-+#ifndef __ASM_LIBGCC_H
-+#define __ASM_LIBGCC_H
-+
-+#define ARCH_NEEDS_ashldi3
-+#define ARCH_NEEDS_ashrdi3
-+#define ARCH_NEEDS_lshrdi3
-+
-+#endif /* __ASM_LIBGCC_H */
-diff -Nur linux-2.6.15.1/include/linux/libgcc.h linux-2.6.15.1-openwrt/include/linux/libgcc.h
---- linux-2.6.15.1/include/linux/libgcc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15.1-openwrt/include/linux/libgcc.h	2006-01-20 10:33:38.000000000 +0100
-@@ -0,0 +1,32 @@
-+#ifndef __LINUX_LIBGCC_H
-+#define __LINUX_LIBGCC_H
-+
-+#include <asm/byteorder.h>
-+#include <asm/libgcc.h>
-+
-+typedef long long DWtype;
-+typedef int Wtype;
-+typedef unsigned int UWtype;
-+typedef int word_type __attribute__ ((mode (__word__)));
-+
-+#define BITS_PER_UNIT 8
-+
-+#ifdef __BIG_ENDIAN
-+struct DWstruct {
-+       Wtype high, low;
-+};
-+#elif defined(__LITTLE_ENDIAN)
-+struct DWstruct {
-+       Wtype low, high;
-+};
-+#else
-+#error I feel sick.
-+#endif
-+
-+typedef union
-+{
-+       struct DWstruct s;
-+       DWtype ll;
-+} DWunion;
-+
-+#endif /* __LINUX_LIBGCC_H */
-diff -Nur linux-2.6.15.1/lib/ashldi3.c linux-2.6.15.1-openwrt/lib/ashldi3.c
---- linux-2.6.15.1/lib/ashldi3.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15.1-openwrt/lib/ashldi3.c	2006-01-20 10:38:41.000000000 +0100
-@@ -0,0 +1,32 @@
-+#include <linux/libgcc.h>
-+#include <linux/module.h>
-+
-+#ifdef ARCH_NEEDS_ashldi3
-+
-+DWtype __ashldi3(DWtype u, word_type b)
-+{
-+       DWunion uu, w;
-+       word_type bm;
-+
-+       if (b == 0)
-+               return u;
-+
-+       uu.ll = u;
-+       bm = (sizeof(Wtype) * BITS_PER_UNIT) - b;
-+
-+       if (bm <= 0) {
-+               w.s.low = 0;
-+               w.s.high = (UWtype) uu.s.low << -bm;
-+       } else {
-+               const UWtype carries = (UWtype) uu.s.low >> bm;
-+
-+               w.s.low = (UWtype) uu.s.low << b;
-+               w.s.high = ((UWtype) uu.s.high << b) | carries;
-+       }
-+
-+       return w.ll;
-+}
-+
-+EXPORT_SYMBOL(__ashldi3);
-+
-+#endif /* ARCH_NEEDS_ashldi3 */
-diff -Nur linux-2.6.15.1/lib/ashrdi3.c linux-2.6.15.1-openwrt/lib/ashrdi3.c
---- linux-2.6.15.1/lib/ashrdi3.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15.1-openwrt/lib/ashrdi3.c	2006-01-20 10:39:29.000000000 +0100
-@@ -0,0 +1,36 @@
-+#include <linux/libgcc.h>
-+#include <linux/module.h>
-+
-+/* Unless shift functions are defined with full ANSI prototypes,
-+   parameter b will be promoted to int if word_type is smaller than an int.  */
-+#ifdef ARCH_NEEDS_ashrdi3
-+
-+DWtype __ashrdi3(DWtype u, word_type b)
-+{
-+       DWunion uu, w;
-+       word_type bm;
-+
-+       if (b == 0)
-+               return u;
-+
-+       uu.ll = u;
-+       bm = (sizeof(Wtype) * BITS_PER_UNIT) - b;
-+
-+       if (bm <= 0) {
-+               /* w.s.high = 1..1 or 0..0 */
-+               w.s.high =
-+                   uu.s.high >> (sizeof(Wtype) * BITS_PER_UNIT - 1);
-+               w.s.low = uu.s.high >> -bm;
-+       } else {
-+               const UWtype carries = (UWtype) uu.s.high << bm;
-+
-+               w.s.high = uu.s.high >> b;
-+               w.s.low = ((UWtype) uu.s.low >> b) | carries;
-+       }
-+
-+       return w.ll;
-+}
-+
-+EXPORT_SYMBOL(__ashrdi3);
-+
-+#endif /* ARCH_NEEDS_ashrdi3 */
-diff -Nur linux-2.6.15.1/lib/lshrdi3.c linux-2.6.15.1-openwrt/lib/lshrdi3.c
---- linux-2.6.15.1/lib/lshrdi3.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15.1-openwrt/lib/lshrdi3.c	2006-01-20 10:40:10.000000000 +0100
-@@ -0,0 +1,34 @@
-+#include <linux/libgcc.h>
-+#include <linux/module.h>
-+
-+/* Unless shift functions are defined with full ANSI prototypes,
-+   parameter b will be promoted to int if word_type is smaller than an int.  */
-+#ifdef ARCH_NEEDS_lshrdi3
-+
-+DWtype __lshrdi3(DWtype u, word_type b)
-+{
-+       DWunion uu, w;
-+       word_type bm;
-+
-+       if (b == 0)
-+               return u;
-+
-+       uu.ll = u;
-+       bm = (sizeof(Wtype) * BITS_PER_UNIT) - b;
-+
-+       if (bm <= 0) {
-+               w.s.high = 0;
-+               w.s.low = (UWtype) uu.s.high >> -bm;
-+       } else {
-+               const UWtype carries = (UWtype) uu.s.high << bm;
-+
-+               w.s.high = (UWtype) uu.s.high >> b;
-+               w.s.low = ((UWtype) uu.s.low >> b) | carries;
-+       }
-+
-+       return w.ll;
-+}
-+
-+EXPORT_SYMBOL(__lshrdi3);
-+
-+#endif /* ARCH_NEEDS_lshrdi3 */
-diff -Nur linux-2.6.15.1/lib/Makefile linux-2.6.15.1-openwrt/lib/Makefile
---- linux-2.6.15.1/lib/Makefile	2006-01-15 07:16:02.000000000 +0100
-+++ linux-2.6.15.1-openwrt/lib/Makefile	2006-01-20 10:34:19.000000000 +0100
-@@ -8,6 +8,7 @@
- 	 sha1.o
- 
- lib-y	+= kobject.o kref.o kobject_uevent.o klist.o
-+obj-y	+= ashldi3.o ashrdi3.o lshrdi3.o
- 
- obj-y += sort.o parser.o halfmd4.o
- 
-diff -Nur linux-2.6.15.1/include/asm-arm/libgcc.h linux-2.6.15.1-openwrt/include/asm-arm/libgcc.h
---- linux-2.6.15.1/include/asm-arm/libgcc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15.1-openwrt/include/asm-arm/libgcc.h	2006-04-12 23:01:18.000000000 +0200
-@@ -0,0 +1,8 @@
-+#ifndef __ASM_LIBGCC_H
-+#define __ASM_LIBGCC_H
-+
-+#undef ARCH_NEEDS_ashldi3
-+#undef ARCH_NEEDS_ashrdi3
-+#undef ARCH_NEEDS_lshrdi3
-+
-+#endif /* __ASM_LIBGCC_H */
diff --git a/openwrt/target/linux/generic-2.6/patches/006-gcc4_inline_fix.patch b/openwrt/target/linux/generic-2.6/patches/006-gcc4_inline_fix.patch
deleted file mode 100644
index e95663e382..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/006-gcc4_inline_fix.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux-2.6.15.1.old/include/asm-mips/system.h	2006-01-28 15:02:54.481032280 +0100
-+++ linux-2.6.15.1.dev/include/asm-mips/system.h	2006-01-28 14:47:51.634285848 +0100
-@@ -273,7 +273,7 @@
-    if something tries to do an invalid xchg().  */
- extern void __xchg_called_with_bad_pointer(void);
- 
--static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-+static __always_inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
- {
- 	switch (size) {
- 		case 4:
diff --git a/openwrt/target/linux/generic-2.6/patches/010-disable_old_squashfs_compatibility.patch b/openwrt/target/linux/generic-2.6/patches/010-disable_old_squashfs_compatibility.patch
deleted file mode 100644
index 1b8b61a8ea..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/010-disable_old_squashfs_compatibility.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-diff -Nur linux-2.6.16/fs/squashfs/Makefile linux-2.6.16-owrt/fs/squashfs/Makefile
---- linux-2.6.16/fs/squashfs/Makefile	2006-03-21 13:50:31.000000000 +0100
-+++ linux-2.6.16-owrt/fs/squashfs/Makefile	2006-03-21 13:51:09.000000000 +0100
-@@ -4,5 +4,4 @@
- 
- obj-$(CONFIG_SQUASHFS) += squashfs.o
- squashfs-y += inode.o
--squashfs-y += squashfs2_0.o
- squashfs-y += LzmaDecode.o
-diff -Nur linux-2.6.16/fs/squashfs/squashfs.h linux-2.6.16-owrt/fs/squashfs/squashfs.h
---- linux-2.6.16/fs/squashfs/squashfs.h	2006-03-21 10:55:59.000000000 +0100
-+++ linux-2.6.16-owrt/fs/squashfs/squashfs.h	2006-03-21 13:50:58.000000000 +0100
-@@ -24,6 +24,9 @@
- #ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
- #undef CONFIG_SQUASHFS_1_0_COMPATIBILITY
- #endif
-+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+#undef CONFIG_SQUASHFS_2_0_COMPATIBILITY
-+#endif
- 
- #ifdef SQUASHFS_TRACE
- #define TRACE(s, args...)	printk(KERN_NOTICE "SQUASHFS: "s, ## args)
diff --git a/openwrt/target/linux/generic-2.6/patches/100-netfilter_layer7_2.1nbd.patch b/openwrt/target/linux/generic-2.6/patches/100-netfilter_layer7_2.1nbd.patch
deleted file mode 100644
index ed8009cc6e..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/100-netfilter_layer7_2.1nbd.patch
+++ /dev/null
@@ -1,2071 +0,0 @@
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ip_conntrack.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_conntrack.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ip_conntrack.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_conntrack.h	2006-03-20 13:48:06.000000000 +0100
-@@ -122,6 +122,15 @@
- 	/* Traversed often, so hopefully in different cacheline to top */
- 	/* These are my tuples; original and reply */
- 	struct ip_conntrack_tuple_hash tuplehash[IP_CT_DIR_MAX];
-+
-+#if defined(CONFIG_IP_NF_MATCH_LAYER7) || defined(CONFIG_IP_NF_MATCH_LAYER7_MODULE)
-+        struct {
-+                char * app_proto; /* e.g. "http". NULL before decision. "unknown" after decision if no match */
-+                char * app_data;  /* application layer data so far.  NULL after match decision */
-+                unsigned int app_data_len;
-+        } layer7;
-+#endif
-+
- };
- 
- struct ip_conntrack_expect
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ipt_layer7.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ipt_layer7.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ipt_layer7.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ipt_layer7.h	2006-03-20 13:48:06.000000000 +0100
-@@ -0,0 +1,27 @@
-+/* 
-+  By Matthew Strait <quadong@users.sf.net>, Dec 2003.
-+  http://l7-filter.sf.net
-+
-+  This program is free software; you can redistribute it and/or
-+  modify it under the terms of the GNU General Public License
-+  as published by the Free Software Foundation; either version
-+  2 of the License, or (at your option) any later version.
-+  http://www.gnu.org/licenses/gpl.txt
-+*/
-+
-+#ifndef _IPT_LAYER7_H
-+#define _IPT_LAYER7_H
-+
-+#define MAX_PATTERN_LEN 8192
-+#define MAX_PROTOCOL_LEN 256
-+
-+typedef char *(*proc_ipt_search) (char *, char, char *);
-+
-+struct ipt_layer7_info {
-+    char protocol[MAX_PROTOCOL_LEN];
-+    char invert:1;
-+    char pattern[MAX_PATTERN_LEN];
-+    char pkt;
-+};
-+
-+#endif /* _IPT_LAYER7_H */
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ip_conntrack_core.c linux-2.6.16-owrt/net/ipv4/netfilter/ip_conntrack_core.c
---- linux-2.6.16/net/ipv4/netfilter/ip_conntrack_core.c	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ip_conntrack_core.c	2006-03-20 13:48:06.000000000 +0100
-@@ -339,6 +339,13 @@
- 	 * too. */
- 	ip_ct_remove_expectations(ct);
- 
-+	#if defined(CONFIG_IP_NF_MATCH_LAYER7) || defined(CONFIG_IP_NF_MATCH_LAYER7_MODULE)
-+	if(ct->layer7.app_proto)
-+		kfree(ct->layer7.app_proto);
-+	if(ct->layer7.app_data)
-+		kfree(ct->layer7.app_data);
-+	#endif
-+
- 	/* We overload first tuple to link into unconfirmed list. */
- 	if (!is_confirmed(ct)) {
- 		BUG_ON(list_empty(&ct->tuplehash[IP_CT_DIR_ORIGINAL].list));
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ip_conntrack_standalone.c linux-2.6.16-owrt/net/ipv4/netfilter/ip_conntrack_standalone.c
---- linux-2.6.16/net/ipv4/netfilter/ip_conntrack_standalone.c	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ip_conntrack_standalone.c	2006-03-20 13:48:06.000000000 +0100
-@@ -189,6 +189,12 @@
- 		return -ENOSPC;
- #endif
- 
-+#if defined(CONFIG_IP_NF_MATCH_LAYER7) || defined(CONFIG_IP_NF_MATCH_LAYER7_MODULE)
-+	if(conntrack->layer7.app_proto)
-+		if (seq_printf(s, "l7proto=%s ",conntrack->layer7.app_proto))
-+			return 1;
-+#endif
-+
- 	if (seq_printf(s, "use=%u\n", atomic_read(&conntrack->ct_general.use)))
- 		return -ENOSPC;
- 
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ipt_layer7.c linux-2.6.16-owrt/net/ipv4/netfilter/ipt_layer7.c
---- linux-2.6.16/net/ipv4/netfilter/ipt_layer7.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ipt_layer7.c	2006-03-20 13:48:06.000000000 +0100
-@@ -0,0 +1,592 @@
-+/* 
-+  Kernel module to match application layer (OSI layer 7) 
-+  data in connections.
-+  
-+  http://l7-filter.sf.net
-+
-+  By Matthew Strait and Ethan Sommer, 2003-2005.
-+
-+  This program is free software; you can redistribute it and/or
-+  modify it under the terms of the GNU General Public License
-+  as published by the Free Software Foundation; either version
-+  2 of the License, or (at your option) any later version.
-+  http://www.gnu.org/licenses/gpl.txt
-+
-+  Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>
-+  and cls_layer7.c (C) 2003 Matthew Strait, Ethan Sommer, Justin Levandoski
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_conntrack.h>
-+#include <linux/proc_fs.h>
-+#include <linux/ctype.h>
-+#include <net/ip.h>
-+#include <net/tcp.h>
-+#include <linux/spinlock.h>
-+
-+#include "regexp/regexp.c"
-+
-+#include <linux/netfilter_ipv4/ipt_layer7.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+
-+MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("iptables application layer match module");
-+MODULE_VERSION("2.0");
-+
-+static int maxdatalen = 2048; // this is the default
-+module_param(maxdatalen, int, 0444);
-+MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
-+
-+#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
-+	#define DPRINTK(format,args...) printk(format,##args)
-+#else
-+	#define DPRINTK(format,args...)
-+#endif
-+
-+#define TOTAL_PACKETS master_conntrack->counters[IP_CT_DIR_ORIGINAL].packets + \
-+		      master_conntrack->counters[IP_CT_DIR_REPLY].packets
-+
-+/* Number of packets whose data we look at.
-+This can be modified through /proc/net/layer7_numpackets */
-+static int num_packets = 10;
-+
-+static struct pattern_cache {
-+	char * regex_string;
-+	regexp * pattern;
-+	struct pattern_cache * next;
-+} * first_pattern_cache = NULL;
-+
-+/* I'm new to locking.  Here are my assumptions:
-+
-+- No one will write to /proc/net/layer7_numpackets over and over very fast; 
-+  if they did, nothing awful would happen.
-+
-+- This code will never be processing the same packet twice at the same time,
-+  because iptables rules are traversed in order.
-+
-+- It doesn't matter if two packets from different connections are in here at 
-+  the same time, because they don't share any data.
-+
-+- It _does_ matter if two packets from the same connection are here at the same
-+  time.  In this case, we have to protect the conntracks and the list of 
-+  compiled patterns.
-+*/
-+DEFINE_RWLOCK(ct_lock);
-+DEFINE_SPINLOCK(list_lock);
-+
-+#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
-+/* Converts an unfriendly string into a friendly one by 
-+replacing unprintables with periods and all whitespace with " ". */
-+static char * friendly_print(unsigned char * s)
-+{
-+	char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
-+	int i;
-+
-+	if(!f) {
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: out of memory in friendly_print, bailing.\n");
-+		return NULL;
-+	}
-+
-+	for(i = 0; i < strlen(s); i++){
-+		if(isprint(s[i]) && s[i] < 128)	f[i] = s[i];
-+		else if(isspace(s[i]))		f[i] = ' ';
-+		else 				f[i] = '.';
-+	}
-+	f[i] = '\0';
-+	return f;
-+}
-+
-+static char dec2hex(int i)
-+{
-+	switch (i) {
-+		case 0 ... 9:
-+			return (char)(i + '0');
-+			break;
-+		case 10 ... 15:
-+			return (char)(i - 10 + 'a');
-+			break;
-+		default:
-+			if (net_ratelimit()) 
-+				printk("Problem in dec2hex\n");
-+			return '\0';
-+	}
-+}
-+
-+static char * hex_print(unsigned char * s)
-+{
-+	char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
-+	int i;
-+
-+	if(!g) {
-+	       if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: out of memory in hex_print, bailing.\n");
-+	       return NULL;
-+	}
-+
-+	for(i = 0; i < strlen(s); i++) {
-+		g[i*3    ] = dec2hex(s[i]/16);
-+		g[i*3 + 1] = dec2hex(s[i]%16);
-+		g[i*3 + 2] = ' ';
-+	}
-+	g[i*3] = '\0';
-+
-+	return g;
-+}
-+#endif // DEBUG
-+
-+/* Use instead of regcomp.  As we expect to be seeing the same regexps over and
-+over again, it make sense to cache the results. */
-+static regexp * compile_and_cache(char * regex_string, char * protocol) 
-+{
-+	struct pattern_cache * node               = first_pattern_cache;
-+	struct pattern_cache * last_pattern_cache = first_pattern_cache;
-+	struct pattern_cache * tmp;
-+	unsigned int len;
-+
-+	while (node != NULL) {
-+		if (!strcmp(node->regex_string, regex_string)) 
-+		return node->pattern;
-+
-+		last_pattern_cache = node;/* points at the last non-NULL node */
-+		node = node->next;
-+	}
-+
-+	/* If we reach the end of the list, then we have not yet cached
-+	   the pattern for this regex. Let's do that now. 
-+	   Be paranoid about running out of memory to avoid list corruption. */
-+	tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
-+
-+	if(!tmp) {
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: out of memory in compile_and_cache, bailing.\n");
-+		return NULL;
-+	}
-+
-+	tmp->regex_string  = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
-+	tmp->pattern       = kmalloc(sizeof(struct regexp),    GFP_ATOMIC);
-+	tmp->next = NULL;
-+
-+	if(!tmp->regex_string || !tmp->pattern) {
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: out of memory in compile_and_cache, bailing.\n");
-+		kfree(tmp->regex_string);
-+		kfree(tmp->pattern);
-+		kfree(tmp);
-+		return NULL;
-+	}
-+
-+	/* Ok.  The new node is all ready now. */
-+	node = tmp;
-+
-+	if(first_pattern_cache == NULL) /* list is empty */
-+		first_pattern_cache = node; /* make node the beginning */
-+	else
-+		last_pattern_cache->next = node; /* attach node to the end */
-+
-+	/* copy the string and compile the regex */
-+	len = strlen(regex_string);
-+	DPRINTK("About to compile this: \"%s\"\n", regex_string);
-+	node->pattern = regcomp(regex_string, &len);
-+	if ( !node->pattern ) {
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: Error compiling regexp \"%s\" (%s)\n", regex_string, protocol);
-+		/* pattern is now cached as NULL, so we won't try again. */
-+	}
-+
-+	strcpy(node->regex_string, regex_string);
-+	return node->pattern;
-+}
-+
-+static int can_handle(const struct sk_buff *skb)
-+{
-+	if(!skb->nh.iph) /* not IP */
-+		return 0;
-+	if(skb->nh.iph->protocol != IPPROTO_TCP &&
-+	   skb->nh.iph->protocol != IPPROTO_UDP &&
-+	   skb->nh.iph->protocol != IPPROTO_ICMP)
-+		return 0;
-+	return 1;
-+}
-+
-+/* Returns offset the into the skb->data that the application data starts */
-+static int app_data_offset(const struct sk_buff *skb)
-+{
-+	/* In case we are ported somewhere (ebtables?) where skb->nh.iph 
-+	isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
-+	int ip_hl = 4*skb->nh.iph->ihl;
-+
-+	if( skb->nh.iph->protocol == IPPROTO_TCP ) {
-+		/* 12 == offset into TCP header for the header length field. 
-+		Can't get this with skb->h.th->doff because the tcphdr 
-+		struct doesn't get set when routing (this is confirmed to be 
-+		true in Netfilter as well as QoS.) */
-+		int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
-+
-+		return ip_hl + tcp_hl;
-+	} else if( skb->nh.iph->protocol == IPPROTO_UDP  ) {
-+		return ip_hl + 8; /* UDP header is always 8 bytes */
-+	} else if( skb->nh.iph->protocol == IPPROTO_ICMP ) {
-+		return ip_hl + 8; /* ICMP header is 8 bytes */
-+	} else {
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: tried to handle unknown protocol!\n");
-+		return ip_hl + 8; /* something reasonable */
-+	}
-+}
-+
-+/* handles whether there's a match when we aren't appending data anymore */
-+static int match_no_append(struct ip_conntrack * conntrack, struct ip_conntrack * master_conntrack,
-+			enum ip_conntrack_info ctinfo, enum ip_conntrack_info master_ctinfo,
-+			struct ipt_layer7_info * info)
-+{
-+	/* If we're in here, throw the app data away */
-+	write_lock(&ct_lock);
-+	if(master_conntrack->layer7.app_data != NULL) {
-+
-+	#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
-+		if(!master_conntrack->layer7.app_proto) {
-+			char * f = friendly_print(master_conntrack->layer7.app_data);
-+			char * g = hex_print(master_conntrack->layer7.app_data);
-+			DPRINTK("\nl7-filter gave up after %d bytes (%llu packets):\n%s\n", 
-+				strlen(f), 
-+				TOTAL_PACKETS, f);
-+			kfree(f); 
-+			DPRINTK("In hex: %s\n", g);
-+			kfree(g);
-+		}
-+	#endif
-+
-+		kfree(master_conntrack->layer7.app_data);
-+		master_conntrack->layer7.app_data = NULL; /* don't free again */
-+	}
-+	write_unlock(&ct_lock);
-+
-+	if(master_conntrack->layer7.app_proto){
-+		/* Here child connections set their .app_proto (for /proc/net/ip_conntrack) */
-+		write_lock(&ct_lock);
-+		if(!conntrack->layer7.app_proto) {
-+			conntrack->layer7.app_proto = kmalloc(strlen(master_conntrack->layer7.app_proto)+1, GFP_ATOMIC);
-+			if(!conntrack->layer7.app_proto){
-+				if (net_ratelimit()) 
-+					printk(KERN_ERR "layer7: out of memory in match_no_append, bailing.\n");
-+				write_unlock(&ct_lock);
-+				return 1;
-+			}
-+			strcpy(conntrack->layer7.app_proto, master_conntrack->layer7.app_proto);
-+		}
-+		write_unlock(&ct_lock);
-+	
-+		return (!strcmp(master_conntrack->layer7.app_proto, info->protocol));
-+	}
-+	else {
-+		/* If not classified, set to "unknown" to distinguish from 
-+		connections that are still being tested. */
-+		write_lock(&ct_lock);
-+		master_conntrack->layer7.app_proto = kmalloc(strlen("unknown")+1, GFP_ATOMIC);
-+		if(!master_conntrack->layer7.app_proto){
-+			if (net_ratelimit()) 
-+				printk(KERN_ERR "layer7: out of memory in match_no_append, bailing.\n");
-+			write_unlock(&ct_lock);
-+			return 1;
-+		}
-+		strcpy(master_conntrack->layer7.app_proto, "unknown");
-+		write_unlock(&ct_lock);
-+		return 0;
-+	}
-+}
-+
-+static int add_datastr(char *target, int offset, char *app_data, int len)
-+{
-+	int length = 0, i;
-+
-+	/* Strip nulls. Make everything lower case (our regex lib doesn't
-+	do case insensitivity).  Add it to the end of the current data. */
-+	for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
-+		if(app_data[i] != '\0') {
-+			target[length+offset] = 
-+				/* the kernel version of tolower mungs 'upper ascii' */
-+				isascii(app_data[i])? tolower(app_data[i]) : app_data[i];
-+			length++;
-+		}
-+	}
-+	target[length+offset] = '\0';
-+
-+	return length;
-+}
-+
-+/* add the new app data to the conntrack.  Return number of bytes added. */
-+static int add_data(struct ip_conntrack * master_conntrack, 
-+			char * app_data, int appdatalen)
-+{
-+	int length;
-+	
-+	length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
-+	master_conntrack->layer7.app_data_len += length;
-+
-+	return length;
-+}
-+
-+/* Returns true on match and false otherwise.  */
-+static int match(/* const */struct sk_buff *skb, const struct net_device *in,
-+		 const struct net_device *out, const void *matchinfo,
-+		 int offset,		   int *hotdrop)
-+{
-+	struct ipt_layer7_info * info = (struct ipt_layer7_info *)matchinfo;
-+	enum ip_conntrack_info master_ctinfo, ctinfo;
-+	struct ip_conntrack *master_conntrack, *conntrack;
-+	unsigned char *app_data, *tmp_data;  
-+	unsigned int pattern_result, appdatalen;
-+	regexp * comppattern;
-+
-+	if(!can_handle(skb)){
-+		DPRINTK("layer7: This is some protocol I can't handle.\n");
-+		return info->invert;
-+	}
-+
-+	/* Treat parent & all its children together as one connection, except 
-+	for the purpose of setting conntrack->layer7.app_proto in the actual 
-+	connection. This makes /proc/net/ip_conntrack more satisfying. */
-+	if(!(conntrack = ip_conntrack_get((struct sk_buff *)skb, &ctinfo)) ||
-+	   !(master_conntrack = ip_conntrack_get((struct sk_buff *)skb, &master_ctinfo))) {
-+		//DPRINTK("layer7: packet is not from a known connection, giving up.\n");
-+		return info->invert;
-+	}
-+	
-+	/* Try to get a master conntrack (and its master etc) for FTP, etc. */
-+	while (master_ct(master_conntrack) != NULL)
-+		master_conntrack = master_ct(master_conntrack);
-+
-+	/* if we've classified it or seen too many packets */
-+	if(!info->pkt && (TOTAL_PACKETS > num_packets || 
-+		master_conntrack->layer7.app_proto)) {
-+	
-+		pattern_result = match_no_append(conntrack, master_conntrack, ctinfo, master_ctinfo, info);
-+	
-+		/* skb->cb[0] == seen. Avoid doing things twice if there are two l7 
-+		rules. I'm not sure that using cb for this purpose is correct, although
-+		it says "put your private variables there". But it doesn't look like it
-+		is being used for anything else in the skbs that make it here. How can
-+		I write to cb without making the compiler angry? */
-+		skb->cb[0] = 1; /* marking it seen here is probably irrelevant, but consistant */
-+
-+		return (pattern_result ^ info->invert);
-+	}
-+
-+	if(skb_is_nonlinear(skb)){
-+		if(skb_linearize(skb, GFP_ATOMIC) != 0){
-+			if (net_ratelimit()) 
-+				printk(KERN_ERR "layer7: failed to linearize packet, bailing.\n");
-+			return info->invert;
-+		}
-+	}
-+	
-+	/* now that the skb is linearized, it's safe to set these. */
-+	app_data = skb->data + app_data_offset(skb);
-+	appdatalen = skb->tail - app_data;
-+
-+	spin_lock_bh(&list_lock);
-+	/* the return value gets checked later, when we're ready to use it */
-+	comppattern = compile_and_cache(info->pattern, info->protocol);
-+	spin_unlock_bh(&list_lock);
-+
-+	if (info->pkt) {
-+		tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
-+		if(!tmp_data){
-+			if (net_ratelimit())
-+				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
-+			return info->invert;
-+		}
-+		
-+		tmp_data[0] = '\0';
-+		add_datastr(tmp_data, 0, app_data, appdatalen);
-+		pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
-+		kfree(tmp_data);
-+		tmp_data = NULL;
-+		
-+		return (pattern_result ^ info->invert);
-+	}
-+	
-+	/* On the first packet of a connection, allocate space for app data */
-+	write_lock(&ct_lock);
-+	if(TOTAL_PACKETS == 1 && !skb->cb[0] && !master_conntrack->layer7.app_data) {
-+		master_conntrack->layer7.app_data = kmalloc(maxdatalen, GFP_ATOMIC);
-+		if(!master_conntrack->layer7.app_data){							 
-+			if (net_ratelimit()) 
-+				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
-+			write_unlock(&ct_lock);
-+			return info->invert;
-+		}
-+
-+		master_conntrack->layer7.app_data[0] = '\0';
-+	}
-+	write_unlock(&ct_lock);
-+
-+	/* Can be here, but unallocated, if numpackets is increased near 
-+	the beginning of a connection */
-+	if(master_conntrack->layer7.app_data == NULL)
-+		return (info->invert); /* unmatched */
-+
-+	if(!skb->cb[0]){
-+		int newbytes;
-+		write_lock(&ct_lock);
-+		newbytes = add_data(master_conntrack, app_data, appdatalen);
-+		write_unlock(&ct_lock);
-+
-+		if(newbytes == 0) { /* didn't add any data */
-+			skb->cb[0] = 1;
-+			/* Didn't match before, not going to match now */
-+			return info->invert;
-+		}
-+	}
-+
-+	/* If looking for "unknown", then never match.  "Unknown" means that
-+	we've given up; we're still trying with these packets. */
-+	if(!strcmp(info->protocol, "unknown")) {
-+		pattern_result = 0;
-+	/* If the regexp failed to compile, don't bother running it */
-+	} else if(comppattern && regexec(comppattern, master_conntrack->layer7.app_data)) {
-+		DPRINTK("layer7: matched %s\n", info->protocol);
-+		pattern_result = 1;
-+	} else pattern_result = 0;
-+
-+	if(pattern_result) {
-+		write_lock(&ct_lock);
-+		master_conntrack->layer7.app_proto = kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
-+		if(!master_conntrack->layer7.app_proto){
-+			if (net_ratelimit()) 
-+				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
-+			write_unlock(&ct_lock);
-+			return (pattern_result ^ info->invert);
-+		}
-+		strcpy(master_conntrack->layer7.app_proto, info->protocol);
-+		write_unlock(&ct_lock);
-+	}
-+
-+	/* mark the packet seen */
-+	skb->cb[0] = 1;
-+
-+	return (pattern_result ^ info->invert);
-+}
-+
-+static int checkentry(const char *tablename, const struct ipt_ip *ip,
-+	   void *matchinfo, unsigned int matchsize, unsigned int hook_mask)
-+{
-+	if (matchsize != IPT_ALIGN(sizeof(struct ipt_layer7_info))) 
-+		return 0;
-+	return 1;
-+}
-+
-+static struct ipt_match layer7_match = { 
-+	.name = "layer7", 
-+	.match = &match, 
-+	.checkentry = &checkentry, 
-+	.me = THIS_MODULE 
-+};
-+
-+/* taken from drivers/video/modedb.c */
-+static int my_atoi(const char *s)
-+{
-+	int val = 0;
-+
-+	for (;; s++) {
-+		switch (*s) {
-+			case '0'...'9':
-+			val = 10*val+(*s-'0');
-+			break;
-+		default:
-+			return val;
-+		}
-+	}
-+}
-+
-+/* write out num_packets to userland. */
-+static int layer7_read_proc(char* page, char ** start, off_t off, int count, 
-+		     int* eof, void * data) 
-+{
-+	if(num_packets > 99 && net_ratelimit()) 
-+		printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
-+	
-+	page[0] = num_packets/10 + '0';
-+	page[1] = num_packets%10 + '0';
-+	page[2] = '\n';
-+	page[3] = '\0';
-+		
-+	*eof=1;
-+
-+	return 3;
-+}
-+
-+/* Read in num_packets from userland */
-+static int layer7_write_proc(struct file* file, const char* buffer, 
-+		      unsigned long count, void *data) 
-+{
-+	char * foo = kmalloc(count, GFP_ATOMIC);
-+
-+	if(!foo){
-+		if (net_ratelimit()) 
-+			printk(KERN_ERR "layer7: out of memory, bailing. num_packets unchanged.\n");
-+		return count;
-+	}
-+
-+	if(copy_from_user(foo, buffer, count)) {
-+		return -EFAULT;
-+	}
-+	
-+
-+	num_packets = my_atoi(foo);
-+	kfree (foo);
-+
-+	/* This has an arbitrary limit to make the math easier. I'm lazy. 
-+	But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
-+	if(num_packets > 99) {
-+		printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
-+		num_packets = 99;
-+	} else if(num_packets < 1) {
-+		printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
-+		num_packets = 1;
-+	}
-+	
-+	return count;
-+}
-+
-+/* register the proc file */
-+static void layer7_init_proc(void)
-+{
-+	struct proc_dir_entry* entry;
-+	entry = create_proc_entry("layer7_numpackets", 0644, proc_net);
-+	entry->read_proc = layer7_read_proc;
-+	entry->write_proc = layer7_write_proc;
-+}
-+
-+static void layer7_cleanup_proc(void)
-+{
-+	remove_proc_entry("layer7_numpackets", proc_net);
-+}
-+
-+static int __init init(void)
-+{
-+	layer7_init_proc();
-+	if(maxdatalen < 1) {
-+		printk(KERN_WARNING "layer7: maxdatalen can't be < 1, using 1\n");
-+		maxdatalen = 1;
-+	}
-+	/* This is not a hard limit.  It's just here to prevent people from 
-+	bringing their slow machines to a grinding halt. */
-+	else if(maxdatalen > 65536) {
-+		printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, using 65536\n");
-+		maxdatalen = 65536;             
-+	}	
-+	return ipt_register_match(&layer7_match);
-+}
-+
-+static void __exit fini(void)
-+{
-+	layer7_cleanup_proc();
-+	ipt_unregister_match(&layer7_match);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Nur linux-2.6.16/net/ipv4/netfilter/Kconfig linux-2.6.16-owrt/net/ipv4/netfilter/Kconfig
---- linux-2.6.16/net/ipv4/netfilter/Kconfig	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/Kconfig	2006-03-20 13:48:39.000000000 +0100
-@@ -201,6 +201,24 @@
- 
- 	  To compile it as a module, choose M here.  If unsure, say N.
- 
-+config IP_NF_MATCH_LAYER7
-+	tristate "Layer 7 match support (EXPERIMENTAL)"
-+	depends on IP_NF_IPTABLES && IP_NF_CT_ACCT && IP_NF_CONNTRACK && EXPERIMENTAL
-+	help
-+	  Say Y if you want to be able to classify connections (and their
-+	  packets) based on regular expression matching of their application
-+	  layer data.   This is one way to classify applications such as
-+	  peer-to-peer filesharing systems that do not always use the same
-+	  port.
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+
-+config IP_NF_MATCH_LAYER7_DEBUG
-+	bool "Layer 7 debugging output"
-+	depends on IP_NF_MATCH_LAYER7
-+	help
-+	  Say Y to get lots of debugging output.
-+
- config IP_NF_MATCH_MULTIPORT
- 	tristate "Multiple port match support"
- 	depends on IP_NF_IPTABLES
-diff -Nur linux-2.6.16/net/ipv4/netfilter/Makefile linux-2.6.16-owrt/net/ipv4/netfilter/Makefile
---- linux-2.6.16/net/ipv4/netfilter/Makefile	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/Makefile	2006-03-20 13:48:06.000000000 +0100
-@@ -59,6 +59,8 @@
- obj-$(CONFIG_IP_NF_MATCH_ADDRTYPE) += ipt_addrtype.o
- obj-$(CONFIG_IP_NF_MATCH_POLICY) += ipt_policy.o
- 
-+obj-$(CONFIG_IP_NF_MATCH_LAYER7) += ipt_layer7.o
-+
- # targets
- obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o
- obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o
-diff -Nur linux-2.6.16/net/ipv4/netfilter/regexp/regexp.c linux-2.6.16-owrt/net/ipv4/netfilter/regexp/regexp.c
---- linux-2.6.16/net/ipv4/netfilter/regexp/regexp.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/regexp/regexp.c	2006-03-20 13:48:06.000000000 +0100
-@@ -0,0 +1,1195 @@
-+/*
-+ * regcomp and regexec -- regsub and regerror are elsewhere
-+ * @(#)regexp.c	1.3 of 18 April 87
-+ *
-+ *	Copyright (c) 1986 by University of Toronto.
-+ *	Written by Henry Spencer.  Not derived from licensed software.
-+ *
-+ *	Permission is granted to anyone to use this software for any
-+ *	purpose on any computer system, and to redistribute it freely,
-+ *	subject to the following restrictions:
-+ *
-+ *	1. The author is not responsible for the consequences of use of
-+ *		this software, no matter how awful, even if they arise
-+ *		from defects in it.
-+ *
-+ *	2. The origin of this software must not be misrepresented, either
-+ *		by explicit claim or by omission.
-+ *
-+ *	3. Altered versions must be plainly marked as such, and must not
-+ *		be misrepresented as being the original software.
-+ *
-+ * Beware that some of this code is subtly aware of the way operator
-+ * precedence is structured in regular expressions.  Serious changes in
-+ * regular-expression syntax might require a total rethink.
-+ *
-+ * This code was modified by Ethan Sommer to work within the kernel
-+ * (it now uses kmalloc etc..)
-+ * 
-+ * Modified slightly by Matthew Strait to use more modern C.
-+ */
-+
-+#include "regexp.h"
-+#include "regmagic.h"
-+
-+/* added by ethan and matt.  Lets it work in both kernel and user space.
-+(So iptables can use it, for instance.)  Yea, it goes both ways... */
-+#if __KERNEL__
-+  #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
-+#else
-+  #define printk(format,args...) printf(format,##args)
-+#endif
-+
-+void regerror(char * s)
-+{
-+        printk("<3>Regexp: %s\n", s);
-+        /* NOTREACHED */
-+}
-+
-+/*
-+ * The "internal use only" fields in regexp.h are present to pass info from
-+ * compile to execute that permits the execute phase to run lots faster on
-+ * simple cases.  They are:
-+ *
-+ * regstart	char that must begin a match; '\0' if none obvious
-+ * reganch	is the match anchored (at beginning-of-line only)?
-+ * regmust	string (pointer into program) that match must include, or NULL
-+ * regmlen	length of regmust string
-+ *
-+ * Regstart and reganch permit very fast decisions on suitable starting points
-+ * for a match, cutting down the work a lot.  Regmust permits fast rejection
-+ * of lines that cannot possibly match.  The regmust tests are costly enough
-+ * that regcomp() supplies a regmust only if the r.e. contains something
-+ * potentially expensive (at present, the only such thing detected is * or +
-+ * at the start of the r.e., which can involve a lot of backup).  Regmlen is
-+ * supplied because the test in regexec() needs it and regcomp() is computing
-+ * it anyway.
-+ */
-+
-+/*
-+ * Structure for regexp "program".  This is essentially a linear encoding
-+ * of a nondeterministic finite-state machine (aka syntax charts or
-+ * "railroad normal form" in parsing technology).  Each node is an opcode
-+ * plus a "next" pointer, possibly plus an operand.  "Next" pointers of
-+ * all nodes except BRANCH implement concatenation; a "next" pointer with
-+ * a BRANCH on both ends of it is connecting two alternatives.  (Here we
-+ * have one of the subtle syntax dependencies:  an individual BRANCH (as
-+ * opposed to a collection of them) is never concatenated with anything
-+ * because of operator precedence.)  The operand of some types of node is
-+ * a literal string; for others, it is a node leading into a sub-FSM.  In
-+ * particular, the operand of a BRANCH node is the first node of the branch.
-+ * (NB this is *not* a tree structure:  the tail of the branch connects
-+ * to the thing following the set of BRANCHes.)  The opcodes are:
-+ */
-+
-+/* definition	number	opnd?	meaning */
-+#define	END	0	/* no	End of program. */
-+#define	BOL	1	/* no	Match "" at beginning of line. */
-+#define	EOL	2	/* no	Match "" at end of line. */
-+#define	ANY	3	/* no	Match any one character. */
-+#define	ANYOF	4	/* str	Match any character in this string. */
-+#define	ANYBUT	5	/* str	Match any character not in this string. */
-+#define	BRANCH	6	/* node	Match this alternative, or the next... */
-+#define	BACK	7	/* no	Match "", "next" ptr points backward. */
-+#define	EXACTLY	8	/* str	Match this string. */
-+#define	NOTHING	9	/* no	Match empty string. */
-+#define	STAR	10	/* node	Match this (simple) thing 0 or more times. */
-+#define	PLUS	11	/* node	Match this (simple) thing 1 or more times. */
-+#define	OPEN	20	/* no	Mark this point in input as start of #n. */
-+			/*	OPEN+1 is number 1, etc. */
-+#define	CLOSE	30	/* no	Analogous to OPEN. */
-+
-+/*
-+ * Opcode notes:
-+ *
-+ * BRANCH	The set of branches constituting a single choice are hooked
-+ *		together with their "next" pointers, since precedence prevents
-+ *		anything being concatenated to any individual branch.  The
-+ *		"next" pointer of the last BRANCH in a choice points to the
-+ *		thing following the whole choice.  This is also where the
-+ *		final "next" pointer of each individual branch points; each
-+ *		branch starts with the operand node of a BRANCH node.
-+ *
-+ * BACK		Normal "next" pointers all implicitly point forward; BACK
-+ *		exists to make loop structures possible.
-+ *
-+ * STAR,PLUS	'?', and complex '*' and '+', are implemented as circular
-+ *		BRANCH structures using BACK.  Simple cases (one character
-+ *		per match) are implemented with STAR and PLUS for speed
-+ *		and to minimize recursive plunges.
-+ *
-+ * OPEN,CLOSE	...are numbered at compile time.
-+ */
-+
-+/*
-+ * A node is one char of opcode followed by two chars of "next" pointer.
-+ * "Next" pointers are stored as two 8-bit pieces, high order first.  The
-+ * value is a positive offset from the opcode of the node containing it.
-+ * An operand, if any, simply follows the node.  (Note that much of the
-+ * code generation knows about this implicit relationship.)
-+ *
-+ * Using two bytes for the "next" pointer is vast overkill for most things,
-+ * but allows patterns to get big without disasters.
-+ */
-+#define	OP(p)	(*(p))
-+#define	NEXT(p)	(((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
-+#define	OPERAND(p)	((p) + 3)
-+
-+/*
-+ * See regmagic.h for one further detail of program structure.
-+ */
-+
-+
-+/*
-+ * Utility definitions.
-+ */
-+#ifndef CHARBITS
-+#define	UCHARAT(p)	((int)*(unsigned char *)(p))
-+#else
-+#define	UCHARAT(p)	((int)*(p)&CHARBITS)
-+#endif
-+
-+#define	FAIL(m)	{ regerror(m); return(NULL); }
-+#define	ISMULT(c)	((c) == '*' || (c) == '+' || (c) == '?')
-+#define	META	"^$.[()|?+*\\"
-+
-+/*
-+ * Flags to be passed up and down.
-+ */
-+#define	HASWIDTH	01	/* Known never to match null string. */
-+#define	SIMPLE		02	/* Simple enough to be STAR/PLUS operand. */
-+#define	SPSTART		04	/* Starts with * or +. */
-+#define	WORST		0	/* Worst case. */
-+
-+/*
-+ * Global work variables for regcomp().
-+ */
-+static char *regparse;		/* Input-scan pointer. */
-+static int regnpar;		/* () count. */
-+static char regdummy;
-+static char *regcode;		/* Code-emit pointer; &regdummy = don't. */
-+static long regsize;		/* Code size. */
-+
-+/*
-+ * Forward declarations for regcomp()'s friends.
-+ */
-+#ifndef STATIC
-+#define	STATIC	static
-+#endif
-+STATIC char *reg(int paren,int *flagp);
-+STATIC char *regbranch(int *flagp);
-+STATIC char *regpiece(int *flagp);
-+STATIC char *regatom(int *flagp);
-+STATIC char *regnode(char op);
-+STATIC char *regnext(char *p);
-+STATIC void regc(char b);
-+STATIC void reginsert(char op, char *opnd);
-+STATIC void regtail(char *p, char *val);
-+STATIC void regoptail(char *p, char *val);
-+
-+
-+__kernel_size_t my_strcspn(const char *s1,const char *s2)
-+{
-+        char *scan1;
-+        char *scan2;
-+        int count;
-+
-+        count = 0;
-+        for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
-+                for (scan2 = (char *)s2; *scan2 != '\0';)       /* ++ moved down. */
-+                        if (*scan1 == *scan2++)
-+                                return(count);
-+                count++;
-+        }
-+        return(count);
-+}
-+
-+/*
-+ - regcomp - compile a regular expression into internal code
-+ *
-+ * We can't allocate space until we know how big the compiled form will be,
-+ * but we can't compile it (and thus know how big it is) until we've got a
-+ * place to put the code.  So we cheat:  we compile it twice, once with code
-+ * generation turned off and size counting turned on, and once "for real".
-+ * This also means that we don't allocate space until we are sure that the
-+ * thing really will compile successfully, and we never have to move the
-+ * code and thus invalidate pointers into it.  (Note that it has to be in
-+ * one piece because free() must be able to free it all.)
-+ *
-+ * Beware that the optimization-preparation code in here knows about some
-+ * of the structure of the compiled regexp.
-+ */
-+regexp *
-+regcomp(char *exp,int *patternsize)
-+{
-+	register regexp *r;
-+	register char *scan;
-+	register char *longest;
-+	register int len;
-+	int flags;
-+	/* commented out by ethan
-+	   extern char *malloc();
-+	*/
-+
-+	if (exp == NULL)
-+		FAIL("NULL argument");
-+
-+	/* First pass: determine size, legality. */
-+	regparse = exp;
-+	regnpar = 1;
-+	regsize = 0L;
-+	regcode = &regdummy;
-+	regc(MAGIC);
-+	if (reg(0, &flags) == NULL)
-+		return(NULL);
-+
-+	/* Small enough for pointer-storage convention? */
-+	if (regsize >= 32767L)		/* Probably could be 65535L. */
-+		FAIL("regexp too big");
-+
-+	/* Allocate space. */
-+	*patternsize=sizeof(regexp) + (unsigned)regsize;
-+	r = (regexp *)malloc(sizeof(regexp) + (unsigned)regsize);
-+	if (r == NULL)
-+		FAIL("out of space");
-+
-+	/* Second pass: emit code. */
-+	regparse = exp;
-+	regnpar = 1;
-+	regcode = r->program;
-+	regc(MAGIC);
-+	if (reg(0, &flags) == NULL)
-+		return(NULL);
-+
-+	/* Dig out information for optimizations. */
-+	r->regstart = '\0';	/* Worst-case defaults. */
-+	r->reganch = 0;
-+	r->regmust = NULL;
-+	r->regmlen = 0;
-+	scan = r->program+1;			/* First BRANCH. */
-+	if (OP(regnext(scan)) == END) {		/* Only one top-level choice. */
-+		scan = OPERAND(scan);
-+
-+		/* Starting-point info. */
-+		if (OP(scan) == EXACTLY)
-+			r->regstart = *OPERAND(scan);
-+		else if (OP(scan) == BOL)
-+			r->reganch++;
-+
-+		/*
-+		 * If there's something expensive in the r.e., find the
-+		 * longest literal string that must appear and make it the
-+		 * regmust.  Resolve ties in favor of later strings, since
-+		 * the regstart check works with the beginning of the r.e.
-+		 * and avoiding duplication strengthens checking.  Not a
-+		 * strong reason, but sufficient in the absence of others.
-+		 */
-+		if (flags&SPSTART) {
-+			longest = NULL;
-+			len = 0;
-+			for (; scan != NULL; scan = regnext(scan))
-+				if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
-+					longest = OPERAND(scan);
-+					len = strlen(OPERAND(scan));
-+				}
-+			r->regmust = longest;
-+			r->regmlen = len;
-+		}
-+	}
-+
-+	return(r);
-+}
-+
-+/*
-+ - reg - regular expression, i.e. main body or parenthesized thing
-+ *
-+ * Caller must absorb opening parenthesis.
-+ *
-+ * Combining parenthesis handling with the base level of regular expression
-+ * is a trifle forced, but the need to tie the tails of the branches to what
-+ * follows makes it hard to avoid.
-+ */
-+static char *
-+reg(int paren, int *flagp /* Parenthesized? */ )
-+{
-+	register char *ret;
-+	register char *br;
-+	register char *ender;
-+	register int parno = 0; /* 0 makes gcc happy */
-+	int flags;
-+
-+	*flagp = HASWIDTH;	/* Tentatively. */
-+
-+	/* Make an OPEN node, if parenthesized. */
-+	if (paren) {
-+		if (regnpar >= NSUBEXP)
-+			FAIL("too many ()");
-+		parno = regnpar;
-+		regnpar++;
-+		ret = regnode(OPEN+parno);
-+	} else
-+		ret = NULL;
-+
-+	/* Pick up the branches, linking them together. */
-+	br = regbranch(&flags);
-+	if (br == NULL)
-+		return(NULL);
-+	if (ret != NULL)
-+		regtail(ret, br);	/* OPEN -> first. */
-+	else
-+		ret = br;
-+	if (!(flags&HASWIDTH))
-+		*flagp &= ~HASWIDTH;
-+	*flagp |= flags&SPSTART;
-+	while (*regparse == '|') {
-+		regparse++;
-+		br = regbranch(&flags);
-+		if (br == NULL)
-+			return(NULL);
-+		regtail(ret, br);	/* BRANCH -> BRANCH. */
-+		if (!(flags&HASWIDTH))
-+			*flagp &= ~HASWIDTH;
-+		*flagp |= flags&SPSTART;
-+	}
-+
-+	/* Make a closing node, and hook it on the end. */
-+	ender = regnode((paren) ? CLOSE+parno : END);	
-+	regtail(ret, ender);
-+
-+	/* Hook the tails of the branches to the closing node. */
-+	for (br = ret; br != NULL; br = regnext(br))
-+		regoptail(br, ender);
-+
-+	/* Check for proper termination. */
-+	if (paren && *regparse++ != ')') {
-+		FAIL("unmatched ()");
-+	} else if (!paren && *regparse != '\0') {
-+		if (*regparse == ')') {
-+			FAIL("unmatched ()");
-+		} else
-+			FAIL("junk on end");	/* "Can't happen". */
-+		/* NOTREACHED */
-+	}
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regbranch - one alternative of an | operator
-+ *
-+ * Implements the concatenation operator.
-+ */
-+static char *
-+regbranch(int *flagp)
-+{
-+	register char *ret;
-+	register char *chain;
-+	register char *latest;
-+	int flags;
-+
-+	*flagp = WORST;		/* Tentatively. */
-+
-+	ret = regnode(BRANCH);
-+	chain = NULL;
-+	while (*regparse != '\0' && *regparse != '|' && *regparse != ')') {
-+		latest = regpiece(&flags);
-+		if (latest == NULL)
-+			return(NULL);
-+		*flagp |= flags&HASWIDTH;
-+		if (chain == NULL)	/* First piece. */
-+			*flagp |= flags&SPSTART;
-+		else
-+			regtail(chain, latest);
-+		chain = latest;
-+	}
-+	if (chain == NULL)	/* Loop ran zero times. */
-+		(void) regnode(NOTHING);
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regpiece - something followed by possible [*+?]
-+ *
-+ * Note that the branching code sequences used for ? and the general cases
-+ * of * and + are somewhat optimized:  they use the same NOTHING node as
-+ * both the endmarker for their branch list and the body of the last branch.
-+ * It might seem that this node could be dispensed with entirely, but the
-+ * endmarker role is not redundant.
-+ */
-+static char *
-+regpiece(int *flagp)
-+{
-+	register char *ret;
-+	register char op;
-+	register char *next;
-+	int flags;
-+
-+	ret = regatom(&flags);
-+	if (ret == NULL)
-+		return(NULL);
-+
-+	op = *regparse;
-+	if (!ISMULT(op)) {
-+		*flagp = flags;
-+		return(ret);
-+	}
-+
-+	if (!(flags&HASWIDTH) && op != '?')
-+		FAIL("*+ operand could be empty");
-+	*flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
-+
-+	if (op == '*' && (flags&SIMPLE))
-+		reginsert(STAR, ret);
-+	else if (op == '*') {
-+		/* Emit x* as (x&|), where & means "self". */
-+		reginsert(BRANCH, ret);			/* Either x */
-+		regoptail(ret, regnode(BACK));		/* and loop */
-+		regoptail(ret, ret);			/* back */
-+		regtail(ret, regnode(BRANCH));		/* or */
-+		regtail(ret, regnode(NOTHING));		/* null. */
-+	} else if (op == '+' && (flags&SIMPLE))
-+		reginsert(PLUS, ret);
-+	else if (op == '+') {
-+		/* Emit x+ as x(&|), where & means "self". */
-+		next = regnode(BRANCH);			/* Either */
-+		regtail(ret, next);
-+		regtail(regnode(BACK), ret);		/* loop back */
-+		regtail(next, regnode(BRANCH));		/* or */
-+		regtail(ret, regnode(NOTHING));		/* null. */
-+	} else if (op == '?') {
-+		/* Emit x? as (x|) */
-+		reginsert(BRANCH, ret);			/* Either x */
-+		regtail(ret, regnode(BRANCH));		/* or */
-+		next = regnode(NOTHING);		/* null. */
-+		regtail(ret, next);
-+		regoptail(ret, next);
-+	}
-+	regparse++;
-+	if (ISMULT(*regparse))
-+		FAIL("nested *?+");
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regatom - the lowest level
-+ *
-+ * Optimization:  gobbles an entire sequence of ordinary characters so that
-+ * it can turn them into a single node, which is smaller to store and
-+ * faster to run.  Backslashed characters are exceptions, each becoming a
-+ * separate node; the code is simpler that way and it's not worth fixing.
-+ */
-+static char *
-+regatom(int *flagp)
-+{
-+	register char *ret;
-+	int flags;
-+
-+	*flagp = WORST;		/* Tentatively. */
-+
-+	switch (*regparse++) {
-+	case '^':
-+		ret = regnode(BOL);
-+		break;
-+	case '$':
-+		ret = regnode(EOL);
-+		break;
-+	case '.':
-+		ret = regnode(ANY);
-+		*flagp |= HASWIDTH|SIMPLE;
-+		break;
-+	case '[': {
-+			register int class;
-+			register int classend;
-+
-+			if (*regparse == '^') {	/* Complement of range. */
-+				ret = regnode(ANYBUT);
-+				regparse++;
-+			} else
-+				ret = regnode(ANYOF);
-+			if (*regparse == ']' || *regparse == '-')
-+				regc(*regparse++);
-+			while (*regparse != '\0' && *regparse != ']') {
-+				if (*regparse == '-') {
-+					regparse++;
-+					if (*regparse == ']' || *regparse == '\0')
-+						regc('-');
-+					else {
-+						class = UCHARAT(regparse-2)+1;
-+						classend = UCHARAT(regparse);
-+						if (class > classend+1)
-+							FAIL("invalid [] range");
-+						for (; class <= classend; class++)
-+							regc(class);
-+						regparse++;
-+					}
-+				} else
-+					regc(*regparse++);
-+			}
-+			regc('\0');
-+			if (*regparse != ']')
-+				FAIL("unmatched []");
-+			regparse++;
-+			*flagp |= HASWIDTH|SIMPLE;
-+		}
-+		break;
-+	case '(':
-+		ret = reg(1, &flags);
-+		if (ret == NULL)
-+			return(NULL);
-+		*flagp |= flags&(HASWIDTH|SPSTART);
-+		break;
-+	case '\0':
-+	case '|':
-+	case ')':
-+		FAIL("internal urp");	/* Supposed to be caught earlier. */
-+		break;
-+	case '?':
-+	case '+':
-+	case '*':
-+		FAIL("?+* follows nothing");
-+		break;
-+	case '\\':
-+		if (*regparse == '\0')
-+			FAIL("trailing \\");
-+		ret = regnode(EXACTLY);
-+		regc(*regparse++);
-+		regc('\0');
-+		*flagp |= HASWIDTH|SIMPLE;
-+		break;
-+	default: {
-+			register int len;
-+			register char ender;
-+
-+			regparse--;
-+			len = my_strcspn((const char *)regparse, (const char *)META);
-+			if (len <= 0)
-+				FAIL("internal disaster");
-+			ender = *(regparse+len);
-+			if (len > 1 && ISMULT(ender))
-+				len--;		/* Back off clear of ?+* operand. */
-+			*flagp |= HASWIDTH;
-+			if (len == 1)
-+				*flagp |= SIMPLE;
-+			ret = regnode(EXACTLY);
-+			while (len > 0) {
-+				regc(*regparse++);
-+				len--;
-+			}
-+			regc('\0');
-+		}
-+		break;
-+	}
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regnode - emit a node
-+ */
-+static char *			/* Location. */
-+regnode(char op)
-+{
-+	register char *ret;
-+	register char *ptr;
-+
-+	ret = regcode;
-+	if (ret == &regdummy) {
-+		regsize += 3;
-+		return(ret);
-+	}
-+
-+	ptr = ret;
-+	*ptr++ = op;
-+	*ptr++ = '\0';		/* Null "next" pointer. */
-+	*ptr++ = '\0';
-+	regcode = ptr;
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regc - emit (if appropriate) a byte of code
-+ */
-+static void
-+regc(char b)
-+{
-+	if (regcode != &regdummy)
-+		*regcode++ = b;
-+	else
-+		regsize++;
-+}
-+
-+/*
-+ - reginsert - insert an operator in front of already-emitted operand
-+ *
-+ * Means relocating the operand.
-+ */
-+static void
-+reginsert(char op, char* opnd)
-+{
-+	register char *src;
-+	register char *dst;
-+	register char *place;
-+
-+	if (regcode == &regdummy) {
-+		regsize += 3;
-+		return;
-+	}
-+
-+	src = regcode;
-+	regcode += 3;
-+	dst = regcode;
-+	while (src > opnd)
-+		*--dst = *--src;
-+
-+	place = opnd;		/* Op node, where operand used to be. */
-+	*place++ = op;
-+	*place++ = '\0';
-+	*place++ = '\0';
-+}
-+
-+/*
-+ - regtail - set the next-pointer at the end of a node chain
-+ */
-+static void
-+regtail(char *p, char *val)
-+{
-+	register char *scan;
-+	register char *temp;
-+	register int offset;
-+
-+	if (p == &regdummy)
-+		return;
-+
-+	/* Find last node. */
-+	scan = p;
-+	for (;;) {
-+		temp = regnext(scan);
-+		if (temp == NULL)
-+			break;
-+		scan = temp;
-+	}
-+
-+	if (OP(scan) == BACK)
-+		offset = scan - val;
-+	else
-+		offset = val - scan;
-+	*(scan+1) = (offset>>8)&0377;
-+	*(scan+2) = offset&0377;
-+}
-+
-+/*
-+ - regoptail - regtail on operand of first argument; nop if operandless
-+ */
-+static void
-+regoptail(char *p, char *val)
-+{
-+	/* "Operandless" and "op != BRANCH" are synonymous in practice. */
-+	if (p == NULL || p == &regdummy || OP(p) != BRANCH)
-+		return;
-+	regtail(OPERAND(p), val);
-+}
-+
-+/*
-+ * regexec and friends
-+ */
-+
-+/*
-+ * Global work variables for regexec().
-+ */
-+static char *reginput;		/* String-input pointer. */
-+static char *regbol;		/* Beginning of input, for ^ check. */
-+static char **regstartp;	/* Pointer to startp array. */
-+static char **regendp;		/* Ditto for endp. */
-+
-+/*
-+ * Forwards.
-+ */
-+STATIC int regtry(regexp *prog, char *string);
-+STATIC int regmatch(char *prog);
-+STATIC int regrepeat(char *p);
-+
-+#ifdef DEBUG
-+int regnarrate = 0;
-+void regdump();
-+STATIC char *regprop(char *op);
-+#endif
-+
-+/*
-+ - regexec - match a regexp against a string
-+ */
-+int
-+regexec(regexp *prog, char *string)
-+{
-+	register char *s;
-+
-+	/* Be paranoid... */
-+	if (prog == NULL || string == NULL) {
-+		printk("<3>Regexp: NULL parameter\n");
-+		return(0);
-+	}
-+
-+	/* Check validity of program. */
-+	if (UCHARAT(prog->program) != MAGIC) {
-+		printk("<3>Regexp: corrupted program\n");
-+		return(0);
-+	}
-+
-+	/* If there is a "must appear" string, look for it. */
-+	if (prog->regmust != NULL) {
-+		s = string;
-+		while ((s = strchr(s, prog->regmust[0])) != NULL) {
-+			if (strncmp(s, prog->regmust, prog->regmlen) == 0)
-+				break;	/* Found it. */
-+			s++;
-+		}
-+		if (s == NULL)	/* Not present. */
-+			return(0);
-+	}
-+
-+	/* Mark beginning of line for ^ . */
-+	regbol = string;
-+
-+	/* Simplest case:  anchored match need be tried only once. */
-+	if (prog->reganch)
-+		return(regtry(prog, string));
-+
-+	/* Messy cases:  unanchored match. */
-+	s = string;
-+	if (prog->regstart != '\0')
-+		/* We know what char it must start with. */
-+		while ((s = strchr(s, prog->regstart)) != NULL) {
-+			if (regtry(prog, s))
-+				return(1);
-+			s++;
-+		}
-+	else
-+		/* We don't -- general case. */
-+		do {
-+			if (regtry(prog, s))
-+				return(1);
-+		} while (*s++ != '\0');
-+
-+	/* Failure. */
-+	return(0);
-+}
-+
-+/*
-+ - regtry - try match at specific point
-+ */
-+static int			/* 0 failure, 1 success */
-+regtry(regexp *prog, char *string)
-+{
-+	register int i;
-+	register char **sp;
-+	register char **ep;
-+
-+	reginput = string;
-+	regstartp = prog->startp;
-+	regendp = prog->endp;
-+
-+	sp = prog->startp;
-+	ep = prog->endp;
-+	for (i = NSUBEXP; i > 0; i--) {
-+		*sp++ = NULL;
-+		*ep++ = NULL;
-+	}
-+	if (regmatch(prog->program + 1)) {
-+		prog->startp[0] = string;
-+		prog->endp[0] = reginput;
-+		return(1);
-+	} else
-+		return(0);
-+}
-+
-+/*
-+ - regmatch - main matching routine
-+ *
-+ * Conceptually the strategy is simple:  check to see whether the current
-+ * node matches, call self recursively to see whether the rest matches,
-+ * and then act accordingly.  In practice we make some effort to avoid
-+ * recursion, in particular by going through "ordinary" nodes (that don't
-+ * need to know whether the rest of the match failed) by a loop instead of
-+ * by recursion.
-+ */
-+static int			/* 0 failure, 1 success */
-+regmatch(char *prog)
-+{
-+	register char *scan = prog; /* Current node. */
-+	char *next;		    /* Next node. */
-+
-+#ifdef DEBUG
-+	if (scan != NULL && regnarrate)
-+		fprintf(stderr, "%s(\n", regprop(scan));
-+#endif
-+	while (scan != NULL) {
-+#ifdef DEBUG
-+		if (regnarrate)
-+			fprintf(stderr, "%s...\n", regprop(scan));
-+#endif
-+		next = regnext(scan);
-+
-+		switch (OP(scan)) {
-+		case BOL:
-+			if (reginput != regbol)
-+				return(0);
-+			break;
-+		case EOL:
-+			if (*reginput != '\0')
-+				return(0);
-+			break;
-+		case ANY:
-+			if (*reginput == '\0')
-+				return(0);
-+			reginput++;
-+			break;
-+		case EXACTLY: {
-+				register int len;
-+				register char *opnd;
-+
-+				opnd = OPERAND(scan);
-+				/* Inline the first character, for speed. */
-+				if (*opnd != *reginput)
-+					return(0);
-+				len = strlen(opnd);
-+				if (len > 1 && strncmp(opnd, reginput, len) != 0)
-+					return(0);
-+				reginput += len;
-+			}
-+			break;
-+		case ANYOF:
-+			if (*reginput == '\0' || strchr(OPERAND(scan), *reginput) == NULL)
-+				return(0);
-+			reginput++;
-+			break;
-+		case ANYBUT:
-+			if (*reginput == '\0' || strchr(OPERAND(scan), *reginput) != NULL)
-+				return(0);
-+			reginput++;
-+			break;
-+		case NOTHING:
-+		case BACK:
-+			break;
-+		case OPEN+1:
-+		case OPEN+2:
-+		case OPEN+3:
-+		case OPEN+4:
-+		case OPEN+5:
-+		case OPEN+6:
-+		case OPEN+7:
-+		case OPEN+8:
-+		case OPEN+9: {
-+				register int no;
-+				register char *save;
-+
-+				no = OP(scan) - OPEN;
-+				save = reginput;
-+
-+				if (regmatch(next)) {
-+					/*
-+					 * Don't set startp if some later
-+					 * invocation of the same parentheses
-+					 * already has.
-+					 */
-+					if (regstartp[no] == NULL)
-+						regstartp[no] = save;
-+					return(1);
-+				} else
-+					return(0);
-+			}
-+			break;
-+		case CLOSE+1:
-+		case CLOSE+2:
-+		case CLOSE+3:
-+		case CLOSE+4:
-+		case CLOSE+5:
-+		case CLOSE+6:
-+		case CLOSE+7:
-+		case CLOSE+8:
-+		case CLOSE+9:
-+			{
-+				register int no;
-+				register char *save;
-+
-+				no = OP(scan) - CLOSE;
-+				save = reginput;
-+
-+				if (regmatch(next)) {
-+					/*
-+					 * Don't set endp if some later
-+					 * invocation of the same parentheses
-+					 * already has.
-+					 */
-+					if (regendp[no] == NULL)
-+						regendp[no] = save;
-+					return(1);
-+				} else
-+					return(0);
-+			}
-+			break;
-+		case BRANCH: {
-+				register char *save;
-+
-+				if (OP(next) != BRANCH)		/* No choice. */
-+					next = OPERAND(scan);	/* Avoid recursion. */
-+				else {
-+					do {
-+						save = reginput;
-+						if (regmatch(OPERAND(scan)))
-+							return(1);
-+						reginput = save;
-+						scan = regnext(scan);
-+					} while (scan != NULL && OP(scan) == BRANCH);
-+					return(0);
-+					/* NOTREACHED */
-+				}
-+			}
-+			break;
-+		case STAR:
-+		case PLUS: {
-+				register char nextch;
-+				register int no;
-+				register char *save;
-+				register int min;
-+
-+				/*
-+				 * Lookahead to avoid useless match attempts
-+				 * when we know what character comes next.
-+				 */
-+				nextch = '\0';
-+				if (OP(next) == EXACTLY)
-+					nextch = *OPERAND(next);
-+				min = (OP(scan) == STAR) ? 0 : 1;
-+				save = reginput;
-+				no = regrepeat(OPERAND(scan));
-+				while (no >= min) {
-+					/* If it could work, try it. */
-+					if (nextch == '\0' || *reginput == nextch)
-+						if (regmatch(next))
-+							return(1);
-+					/* Couldn't or didn't -- back up. */
-+					no--;
-+					reginput = save + no;
-+				}
-+				return(0);
-+			}
-+			break;
-+		case END:
-+			return(1);	/* Success! */
-+			break;
-+		default:
-+			printk("<3>Regexp: memory corruption\n");
-+			return(0);
-+			break;
-+		}
-+
-+		scan = next;
-+	}
-+
-+	/*
-+	 * We get here only if there's trouble -- normally "case END" is
-+	 * the terminating point.
-+	 */
-+	printk("<3>Regexp: corrupted pointers\n");
-+	return(0);
-+}
-+
-+/*
-+ - regrepeat - repeatedly match something simple, report how many
-+ */
-+static int
-+regrepeat(char *p)
-+{
-+	register int count = 0;
-+	register char *scan;
-+	register char *opnd;
-+
-+	scan = reginput;
-+	opnd = OPERAND(p);
-+	switch (OP(p)) {
-+	case ANY:
-+		count = strlen(scan);
-+		scan += count;
-+		break;
-+	case EXACTLY:
-+		while (*opnd == *scan) {
-+			count++;
-+			scan++;
-+		}
-+		break;
-+	case ANYOF:
-+		while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
-+			count++;
-+			scan++;
-+		}
-+		break;
-+	case ANYBUT:
-+		while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
-+			count++;
-+			scan++;
-+		}
-+		break;
-+	default:		/* Oh dear.  Called inappropriately. */
-+		printk("<3>Regexp: internal foulup\n");
-+		count = 0;	/* Best compromise. */
-+		break;
-+	}
-+	reginput = scan;
-+
-+	return(count);
-+}
-+
-+/*
-+ - regnext - dig the "next" pointer out of a node
-+ */
-+static char* 
-+regnext(char *p)
-+{
-+	register int offset;
-+
-+	if (p == &regdummy)
-+		return(NULL);
-+
-+	offset = NEXT(p);
-+	if (offset == 0)
-+		return(NULL);
-+
-+	if (OP(p) == BACK)
-+		return(p-offset);
-+	else
-+		return(p+offset);
-+}
-+
-+#ifdef DEBUG
-+
-+STATIC char *regprop();
-+
-+/*
-+ - regdump - dump a regexp onto stdout in vaguely comprehensible form
-+ */
-+void
-+regdump(regexp *r)
-+{
-+	register char *s;
-+	register char op = EXACTLY;	/* Arbitrary non-END op. */
-+	register char *next;
-+	/* extern char *strchr(); */
-+
-+
-+	s = r->program + 1;
-+	while (op != END) {	/* While that wasn't END last time... */
-+		op = OP(s);
-+		printf("%2d%s", s-r->program, regprop(s));	/* Where, what. */
-+		next = regnext(s);
-+		if (next == NULL)		/* Next ptr. */
-+			printf("(0)");
-+		else 
-+			printf("(%d)", (s-r->program)+(next-s));
-+		s += 3;
-+		if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
-+			/* Literal string, where present. */
-+			while (*s != '\0') {
-+				putchar(*s);
-+				s++;
-+			}
-+			s++;
-+		}
-+		putchar('\n');
-+	}
-+
-+	/* Header fields of interest. */
-+	if (r->regstart != '\0')
-+		printf("start `%c' ", r->regstart);
-+	if (r->reganch)
-+		printf("anchored ");
-+	if (r->regmust != NULL)
-+		printf("must have \"%s\"", r->regmust);
-+	printf("\n");
-+}
-+
-+/*
-+ - regprop - printable representation of opcode
-+ */
-+static char *
-+regprop(char *op)
-+{
-+#define BUFLEN 50
-+	register char *p;
-+	static char buf[BUFLEN];
-+
-+	strcpy(buf, ":");
-+
-+	switch (OP(op)) {
-+	case BOL:
-+		p = "BOL";
-+		break;
-+	case EOL:
-+		p = "EOL";
-+		break;
-+	case ANY:
-+		p = "ANY";
-+		break;
-+	case ANYOF:
-+		p = "ANYOF";
-+		break;
-+	case ANYBUT:
-+		p = "ANYBUT";
-+		break;
-+	case BRANCH:
-+		p = "BRANCH";
-+		break;
-+	case EXACTLY:
-+		p = "EXACTLY";
-+		break;
-+	case NOTHING:
-+		p = "NOTHING";
-+		break;
-+	case BACK:
-+		p = "BACK";
-+		break;
-+	case END:
-+		p = "END";
-+		break;
-+	case OPEN+1:
-+	case OPEN+2:
-+	case OPEN+3:
-+	case OPEN+4:
-+	case OPEN+5:
-+	case OPEN+6:
-+	case OPEN+7:
-+	case OPEN+8:
-+	case OPEN+9:
-+		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
-+		p = NULL;
-+		break;
-+	case CLOSE+1:
-+	case CLOSE+2:
-+	case CLOSE+3:
-+	case CLOSE+4:
-+	case CLOSE+5:
-+	case CLOSE+6:
-+	case CLOSE+7:
-+	case CLOSE+8:
-+	case CLOSE+9:
-+		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
-+		p = NULL;
-+		break;
-+	case STAR:
-+		p = "STAR";
-+		break;
-+	case PLUS:
-+		p = "PLUS";
-+		break;
-+	default:
-+		printk("<3>Regexp: corrupted opcode\n");
-+		break;
-+	}
-+	if (p != NULL)
-+		strncat(buf, p, BUFLEN-strlen(buf));
-+	return(buf);
-+}
-+#endif
-+
-+
-diff -Nur linux-2.6.16/net/ipv4/netfilter/regexp/regexp.h linux-2.6.16-owrt/net/ipv4/netfilter/regexp/regexp.h
---- linux-2.6.16/net/ipv4/netfilter/regexp/regexp.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/regexp/regexp.h	2006-03-20 13:48:06.000000000 +0100
-@@ -0,0 +1,41 @@
-+/*
-+ * Definitions etc. for regexp(3) routines.
-+ *
-+ * Caveat:  this is V8 regexp(3) [actually, a reimplementation thereof],
-+ * not the System V one.
-+ */
-+
-+#ifndef REGEXP_H
-+#define REGEXP_H
-+
-+
-+/* 
-+http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h , 
-+which contains a version of this library, says:
-+
-+ *
-+ * NSUBEXP must be at least 10, and no greater than 117 or the parser
-+ * will not work properly.
-+ *
-+
-+However, it looks rather like this library is limited to 10.  If you think
-+otherwise, let us know.
-+*/
-+
-+#define NSUBEXP  10
-+typedef struct regexp {
-+	char *startp[NSUBEXP];
-+	char *endp[NSUBEXP];
-+	char regstart;		/* Internal use only. */
-+	char reganch;		/* Internal use only. */
-+	char *regmust;		/* Internal use only. */
-+	int regmlen;		/* Internal use only. */
-+	char program[1];	/* Unwarranted chumminess with compiler. */
-+} regexp;
-+
-+regexp * regcomp(char *exp, int *patternsize);
-+int regexec(regexp *prog, char *string);
-+void regsub(regexp *prog, char *source, char *dest);
-+void regerror(char *s);
-+
-+#endif
-diff -Nur linux-2.6.16/net/ipv4/netfilter/regexp/regmagic.h linux-2.6.16-owrt/net/ipv4/netfilter/regexp/regmagic.h
---- linux-2.6.16/net/ipv4/netfilter/regexp/regmagic.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/regexp/regmagic.h	2006-03-20 13:48:06.000000000 +0100
-@@ -0,0 +1,5 @@
-+/*
-+ * The first byte of the regexp internal "program" is actually this magic
-+ * number; the start node begins in the second byte.
-+ */
-+#define	MAGIC	0234
-diff -Nur linux-2.6.16/net/ipv4/netfilter/regexp/regsub.c linux-2.6.16-owrt/net/ipv4/netfilter/regexp/regsub.c
---- linux-2.6.16/net/ipv4/netfilter/regexp/regsub.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/regexp/regsub.c	2006-03-20 13:48:06.000000000 +0100
-@@ -0,0 +1,95 @@
-+/*
-+ * regsub
-+ * @(#)regsub.c	1.3 of 2 April 86
-+ *
-+ *	Copyright (c) 1986 by University of Toronto.
-+ *	Written by Henry Spencer.  Not derived from licensed software.
-+ *
-+ *	Permission is granted to anyone to use this software for any
-+ *	purpose on any computer system, and to redistribute it freely,
-+ *	subject to the following restrictions:
-+ *
-+ *	1. The author is not responsible for the consequences of use of
-+ *		this software, no matter how awful, even if they arise
-+ *		from defects in it.
-+ *
-+ *	2. The origin of this software must not be misrepresented, either
-+ *		by explicit claim or by omission.
-+ *
-+ *	3. Altered versions must be plainly marked as such, and must not
-+ *		be misrepresented as being the original software.
-+ *
-+ *
-+ * This code was modified by Ethan Sommer to work within the kernel
-+ * (it now uses kmalloc etc..)
-+ *
-+ */
-+#include "regexp.h"
-+#include "regmagic.h"
-+#include <linux/string.h>
-+
-+
-+#ifndef CHARBITS
-+#define	UCHARAT(p)	((int)*(unsigned char *)(p))
-+#else
-+#define	UCHARAT(p)	((int)*(p)&CHARBITS)
-+#endif
-+
-+#if 0
-+//void regerror(char * s)
-+//{
-+//        printk("regexp(3): %s", s);
-+//        /* NOTREACHED */
-+//}
-+#endif
-+
-+/*
-+ - regsub - perform substitutions after a regexp match
-+ */
-+void
-+regsub(regexp * prog, char * source, char * dest)
-+{
-+	register char *src;
-+	register char *dst;
-+	register char c;
-+	register int no;
-+	register int len;
-+	
-+	/* Not necessary and gcc doesn't like it -MLS */
-+	/*extern char *strncpy();*/
-+
-+	if (prog == NULL || source == NULL || dest == NULL) {
-+		regerror("NULL parm to regsub");
-+		return;
-+	}
-+	if (UCHARAT(prog->program) != MAGIC) {
-+		regerror("damaged regexp fed to regsub");
-+		return;
-+	}
-+
-+	src = source;
-+	dst = dest;
-+	while ((c = *src++) != '\0') {
-+		if (c == '&')
-+			no = 0;
-+		else if (c == '\\' && '0' <= *src && *src <= '9')
-+			no = *src++ - '0';
-+		else
-+			no = -1;
-+
-+		if (no < 0) {	/* Ordinary character. */
-+			if (c == '\\' && (*src == '\\' || *src == '&'))
-+				c = *src++;
-+			*dst++ = c;
-+		} else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
-+			len = prog->endp[no] - prog->startp[no];
-+			(void) strncpy(dst, prog->startp[no], len);
-+			dst += len;
-+			if (len != 0 && *(dst-1) == '\0') {	/* strncpy hit NUL. */
-+				regerror("damaged match string");
-+				return;
-+			}
-+		}
-+	}
-+	*dst++ = '\0';
-+}
diff --git a/openwrt/target/linux/generic-2.6/patches/101-ipp2p_0.8.1rc1.patch b/openwrt/target/linux/generic-2.6/patches/101-ipp2p_0.8.1rc1.patch
deleted file mode 100644
index d6fa59379d..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/101-ipp2p_0.8.1rc1.patch
+++ /dev/null
@@ -1,934 +0,0 @@
-diff -urN linux.old/include/linux/netfilter_ipv4/ipt_ipp2p.h linux.dev/include/linux/netfilter_ipv4/ipt_ipp2p.h
---- linux.old/include/linux/netfilter_ipv4/ipt_ipp2p.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/linux/netfilter_ipv4/ipt_ipp2p.h	2006-03-23 15:24:47.000000000 +0100
-@@ -0,0 +1,31 @@
-+#ifndef __IPT_IPP2P_H
-+#define __IPT_IPP2P_H
-+#define IPP2P_VERSION "0.8.1_rc1"
-+
-+struct ipt_p2p_info {
-+    int cmd;
-+    int debug;
-+};
-+
-+#endif //__IPT_IPP2P_H
-+
-+#define SHORT_HAND_IPP2P	1 /* --ipp2p switch*/
-+//#define SHORT_HAND_DATA		4 /* --ipp2p-data switch*/
-+#define SHORT_HAND_NONE		5 /* no short hand*/
-+
-+#define IPP2P_EDK		(1 << 1)
-+#define IPP2P_DATA_KAZAA	(1 << 2)
-+#define IPP2P_DATA_EDK		(1 << 3)
-+#define IPP2P_DATA_DC		(1 << 4)
-+#define IPP2P_DC		(1 << 5)
-+#define IPP2P_DATA_GNU		(1 << 6)
-+#define IPP2P_GNU		(1 << 7)
-+#define IPP2P_KAZAA		(1 << 8)
-+#define IPP2P_BIT		(1 << 9)
-+#define IPP2P_APPLE		(1 << 10)
-+#define IPP2P_SOUL		(1 << 11)
-+#define IPP2P_WINMX		(1 << 12)
-+#define IPP2P_ARES		(1 << 13)
-+#define IPP2P_MUTE		(1 << 14)
-+#define IPP2P_WASTE		(1 << 15)
-+#define IPP2P_XDCC		(1 << 16)
-diff -urN linux.old/net/ipv4/netfilter/Kconfig linux.dev/net/ipv4/netfilter/Kconfig
---- linux.old/net/ipv4/netfilter/Kconfig	2006-03-23 15:21:19.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/Kconfig	2006-03-23 15:26:29.000000000 +0100
-@@ -229,6 +229,12 @@
- 
- 	  To compile it as a module, choose M here.  If unsure, say N.
- 
-+config IP_NF_MATCH_IPP2P
-+	tristate "IPP2P"
-+	depends on IP_NF_IPTABLES
-+	help
-+	  Module for matching traffic of various Peer-to-Peer applications
-+
- config IP_NF_MATCH_TOS
- 	tristate "TOS match support"
- 	depends on IP_NF_IPTABLES
-diff -urN linux.old/net/ipv4/netfilter/Makefile linux.dev/net/ipv4/netfilter/Makefile
---- linux.old/net/ipv4/netfilter/Makefile	2006-03-23 15:21:19.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/Makefile	2006-03-23 15:27:00.000000000 +0100
-@@ -49,6 +49,7 @@
- obj-$(CONFIG_IP_NF_MATCH_HASHLIMIT) += ipt_hashlimit.o
- obj-$(CONFIG_IP_NF_MATCH_SET) += ipt_set.o
- obj-$(CONFIG_IP_NF_MATCH_IPRANGE) += ipt_iprange.o
-+obj-$(CONFIG_IP_NF_MATCH_IPP2P) += ipt_ipp2p.o
- obj-$(CONFIG_IP_NF_MATCH_MULTIPORT) += ipt_multiport.o
- obj-$(CONFIG_IP_NF_MATCH_OWNER) += ipt_owner.o
- obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o
-diff -urN linux.old/net/ipv4/netfilter/ipt_ipp2p.c linux.dev/net/ipv4/netfilter/ipt_ipp2p.c
---- linux.old/net/ipv4/netfilter/ipt_ipp2p.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/net/ipv4/netfilter/ipt_ipp2p.c	2006-03-23 15:24:47.000000000 +0100
-@@ -0,0 +1,868 @@
-+#if defined(MODVERSIONS)
-+#include <linux/modversions.h>
-+#endif
-+#include <linux/module.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/version.h>
-+#include <linux/netfilter_ipv4/ipt_ipp2p.h>
-+#include <net/tcp.h>
-+#include <net/udp.h>
-+
-+#define get_u8(X,O)  (*(__u8 *)(X + O))
-+#define get_u16(X,O)  (*(__u16 *)(X + O))
-+#define get_u32(X,O)  (*(__u32 *)(X + O))
-+
-+MODULE_AUTHOR("Eicke Friedrich/Klaus Degner <ipp2p@ipp2p.org>");
-+MODULE_DESCRIPTION("An extension to iptables to identify P2P traffic.");
-+MODULE_LICENSE("GPL");
-+
-+
-+/*Search for UDP eDonkey/eMule/Kad commands*/
-+int
-+udp_search_edk (unsigned char *haystack, int packet_len)
-+{
-+    unsigned char *t = haystack;
-+    t += 8;
-+
-+	switch (t[0]) {
-+		case 0xe3: 
-+		{	/*edonkey*/
-+			switch (t[1]) 
-+			{
-+				/* client -> server status request */
-+				case 0x96: 
-+					if (packet_len == 14) return ((IPP2P_EDK * 100) + 50);
-+					break;
-+				/* server -> client status request */
-+				case 0x97: if (packet_len == 42) return ((IPP2P_EDK * 100) + 51);
-+					break;
-+						/* server description request */
-+						/* e3 2a ff f0 .. | size == 6 */
-+				case 0xa2: if ( (packet_len == 14) && ( get_u16(t,2) == __constant_htons(0xfff0) ) ) return ((IPP2P_EDK * 100) + 52);
-+					break;
-+						/* server description response */
-+						/* e3 a3 ff f0 ..  | size > 40 && size < 200 */
-+				//case 0xa3: return ((IPP2P_EDK * 100) + 53);
-+				//	break;
-+				case 0x9a: if (packet_len==26) return ((IPP2P_EDK * 100) + 54);
-+					break;
-+
-+				case 0x92: if (packet_len==18) return ((IPP2P_EDK * 100) + 55);
-+					break;
-+			}
-+			break;
-+		}
-+		case 0xe4: 
-+		{
-+			switch (t[1]) 
-+			{
-+						/* e4 20 .. | size == 43 */
-+				case 0x20: if ((packet_len == 43) && (t[2] != 0x00) && (t[34] != 0x00)) return ((IPP2P_EDK * 100) + 60);
-+					break;
-+						/* e4 00 .. 00 | size == 35 ? */
-+				case 0x00: if ((packet_len == 35) && (t[26] == 0x00)) return ((IPP2P_EDK * 100) + 61);
-+					break;
-+						/* e4 10 .. 00 | size == 35 ? */
-+				case 0x10: if ((packet_len == 35) && (t[26] == 0x00)) return ((IPP2P_EDK * 100) + 62);
-+					break;
-+						/* e4 18 .. 00 | size == 35 ? */
-+				case 0x18: if ((packet_len == 35) && (t[26] == 0x00)) return ((IPP2P_EDK * 100) + 63);
-+					break;
-+						/* e4 52 .. | size = 44 */
-+				case 0x52: if (packet_len == 44 ) return ((IPP2P_EDK * 100) + 64);
-+					break;
-+						/* e4 58 .. | size == 6 */
-+				case 0x58: if (packet_len == 14 ) return ((IPP2P_EDK * 100) + 65);
-+					break;
-+						/* e4 59 .. | size == 2 */
-+				case 0x59: if (packet_len == 10 )return ((IPP2P_EDK * 100) + 66);
-+					break;
-+					/* e4 28 .. | packet_len == 52,77,102,127... */
-+				case 0x28: if (((packet_len-52) % 25) == 0) return ((IPP2P_EDK * 100) + 67);
-+					break;
-+					/* e4 50 xx xx | size == 4 */
-+				case 0x50: if (packet_len == 12) return ((IPP2P_EDK * 100) + 68);
-+					break;
-+					/* e4 40 xx xx | size == 48 */
-+				case 0x40: if (packet_len == 56) return ((IPP2P_EDK * 100) + 69);
-+					break;
-+			}
-+			break;
-+		}
-+	} /* end of switch (t[0]) */
-+    return 0;
-+}/*udp_search_edk*/
-+
-+
-+/*Search for UDP Gnutella commands*/
-+int
-+udp_search_gnu (unsigned char *haystack, int packet_len)
-+{
-+    unsigned char *t = haystack;
-+    t += 8;
-+    
-+    if (memcmp(t, "GND", 3) == 0) return ((IPP2P_GNU * 100) + 51);
-+    if (memcmp(t, "GNUTELLA ", 9) == 0) return ((IPP2P_GNU * 100) + 52);
-+    return 0;
-+}/*udp_search_gnu*/
-+
-+
-+/*Search for UDP KaZaA commands*/
-+int
-+udp_search_kazaa (unsigned char *haystack, int packet_len)
-+{
-+    unsigned char *t = haystack;
-+    
-+    if (t[packet_len-1] == 0x00){
-+	t += (packet_len - 6);
-+	if (memcmp(t, "KaZaA", 5) == 0) return (IPP2P_KAZAA * 100 +50);
-+    }
-+    
-+    return 0;
-+}/*udp_search_kazaa*/
-+
-+/*Search for UDP DirectConnect commands*/
-+int
-+udp_search_directconnect (unsigned char *haystack, int packet_len)
-+{
-+    unsigned char *t = haystack;
-+    if ((*(t + 8) == 0x24) && (*(t + packet_len - 1) == 0x7c)) {
-+    	t+=8;
-+    	if (memcmp(t, "SR ", 3) == 0)	 		return ((IPP2P_DC * 100) + 60);
-+    	if (memcmp(t, "Ping ", 5) == 0)	 		return ((IPP2P_DC * 100) + 61);
-+    }
-+    return 0;
-+}/*udp_search_directconnect*/
-+
-+
-+
-+/*Search for UDP BitTorrent commands*/
-+int
-+udp_search_bit (unsigned char *haystack, int packet_len)
-+{
-+	switch(packet_len)
-+	{
-+		case 24:
-+			/* ^ 00 00 04 17 27 10 19 80 */
-+			if ((ntohl(get_u32(haystack, 8)) == 0x00000417) && (ntohl(get_u32(haystack, 12)) == 0x27101980)) 
-+				return (IPP2P_BIT * 100 + 50);
-+			break;
-+		case 44:
-+			if (get_u32(haystack, 16) == __constant_htonl(0x00000400) && get_u32(haystack, 36) == __constant_htonl(0x00000104)) 
-+				return (IPP2P_BIT * 100 + 51);
-+			if (get_u32(haystack, 16) == __constant_htonl(0x00000400))
-+				return (IPP2P_BIT * 100 + 61);
-+			break;
-+		case 65:
-+			if (get_u32(haystack, 16) == __constant_htonl(0x00000404) && get_u32(haystack, 36) == __constant_htonl(0x00000104)) 
-+				return (IPP2P_BIT * 100 + 52);
-+			if (get_u32(haystack, 16) == __constant_htonl(0x00000404))
-+				return (IPP2P_BIT * 100 + 62);
-+			break;
-+		case 67:
-+			if (get_u32(haystack, 16) == __constant_htonl(0x00000406) && get_u32(haystack, 36) == __constant_htonl(0x00000104)) 
-+				return (IPP2P_BIT * 100 + 53);
-+			if (get_u32(haystack, 16) == __constant_htonl(0x00000406))
-+				return (IPP2P_BIT * 100 + 63);
-+			break;
-+		case 211:
-+			if (get_u32(haystack, 8) == __constant_htonl(0x00000405)) 
-+				return (IPP2P_BIT * 100 + 54);
-+			break;
-+		case 29:
-+			if ((get_u32(haystack, 8) == __constant_htonl(0x00000401))) 
-+				return (IPP2P_BIT * 100 + 55);
-+			break;
-+		case 52:
-+			if (get_u32(haystack,8)  == __constant_htonl(0x00000827) &&
-+			get_u32(haystack,12) == __constant_htonl(0x37502950))
-+				return (IPP2P_BIT * 100 + 80);
-+			break;
-+		default:
-+			/* this packet does not have a constant size */
-+			if (packet_len >= 40 && get_u32(haystack, 16) == __constant_htonl(0x00000402) && get_u32(haystack, 36) == __constant_htonl(0x00000104)) 
-+				return (IPP2P_BIT * 100 + 56);
-+			break;
-+	}
-+    
-+	/* some extra-bitcomet rules:
-+	* "d1:" [a|r] "d2:id20:"
-+	*/
-+	if (packet_len > 30 && get_u8(haystack, 8) == 'd' && get_u8(haystack, 9) == '1' && get_u8(haystack, 10) == ':' )
-+	{
-+		if (get_u8(haystack, 11) == 'a' || get_u8(haystack, 11) == 'r')
-+		{
-+			if (memcmp(haystack+12,"d2:id20:",8)==0)
-+				return (IPP2P_BIT * 100 + 57);
-+		}
-+	}
-+    
-+#if 0
-+	/* bitlord rules */
-+	/* packetlen must be bigger than 40 */
-+	/* first 4 bytes are zero */
-+	if (packet_len > 40 && get_u32(haystack, 8) == 0x00000000)
-+	{
-+		/* first rule: 00 00 00 00 01 00 00 xx xx xx xx 00 00 00 00*/
-+		if (get_u32(haystack, 12) == 0x00000000 && 
-+		    get_u32(haystack, 16) == 0x00010000 &&
-+		    get_u32(haystack, 24) == 0x00000000 )
-+			return (IPP2P_BIT * 100 + 71);
-+			
-+		/* 00 01 00 00 0d 00 00 xx xx xx xx 00 00 00 00*/
-+		if (get_u32(haystack, 12) == 0x00000001 && 
-+		    get_u32(haystack, 16) == 0x000d0000 &&
-+		    get_u32(haystack, 24) == 0x00000000 )
-+			return (IPP2P_BIT * 100 + 71);
-+		
-+		    
-+	}
-+#endif
-+
-+    return 0;
-+}/*udp_search_bit*/
-+
-+
-+
-+/*Search for Ares commands*/
-+//#define IPP2P_DEBUG_ARES
-+int
-+search_ares (const unsigned char *payload, const u16 plen)
-+//int search_ares (unsigned char *haystack, int packet_len, int head_len)
-+{
-+//	const unsigned char *t = haystack + head_len;
-+	
-+	/* all ares packets start with  */
-+	if (payload[1] == 0 && (plen - payload[0]) == 3)
-+	{
-+		switch (payload[2])
-+		{
-+			case 0x5a:
-+				/* ares connect */
-+				if ( plen == 6 && payload[5] == 0x05 ) return ((IPP2P_ARES * 100) + 1);
-+				break;
-+			case 0x09:
-+				/* ares search, min 3 chars --> 14 bytes
-+				 * lets define a search can be up to 30 chars --> max 34 bytes
-+				 */
-+				if ( plen >= 14 && plen <= 34 ) return ((IPP2P_ARES * 100) + 1);
-+				break;
-+#ifdef IPP2P_DEBUG_ARES
-+			default:
-+			printk(KERN_DEBUG "Unknown Ares command %x recognized, len: %u \n", (unsigned int) payload[2],plen);
-+#endif /* IPP2P_DEBUG_ARES */
-+		}
-+	}
-+
-+#if 0	        
-+	/* found connect packet: 03 00 5a 04 03 05 */
-+	/* new version ares 1.8: 03 00 5a xx xx 05 */
-+    if ((plen) == 6){	/* possible connect command*/
-+	if ((payload[0] == 0x03) && (payload[1] == 0x00) && (payload[2] == 0x5a) && (payload[5] == 0x05))
-+	    return ((IPP2P_ARES * 100) + 1);
-+    }
-+    if ((plen) == 60){	/* possible download command*/
-+	if ((payload[59] == 0x0a) && (payload[58] == 0x0a)){
-+	    if (memcmp(t, "PUSH SHA1:", 10) == 0) /* found download command */
-+	    	return ((IPP2P_ARES * 100) + 2);
-+	}
-+    }
-+#endif
-+
-+    return 0;
-+} /*search_ares*/
-+
-+/*Search for SoulSeek commands*/
-+int
-+search_soul (const unsigned char *payload, const u16 plen)
-+{
-+//#define IPP2P_DEBUG_SOUL
-+    /* match: xx xx xx xx | xx = sizeof(payload) - 4 */
-+    if (get_u32(payload, 0) == (plen - 4)){
-+	const __u32 m=get_u32(payload, 4);
-+	/* match 00 yy yy 00, yy can be everything */
-+        if ( get_u8(payload, 4) == 0x00 && get_u8(payload, 7) == 0x00 )
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+	printk(KERN_DEBUG "0: Soulseek command 0x%x recognized\n",get_u32(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 1);
-+	}
-+	
-+        /* next match: 01 yy 00 00 | yy can be everything */
-+        if ( get_u8(payload, 4) == 0x01 && get_u16(payload, 6) == 0x0000 )
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+	printk(KERN_DEBUG "1: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 2);
-+	}
-+	
-+	/* other soulseek commandos are: 1-5,7,9,13-18,22,23,26,28,35-37,40-46,50,51,60,62-69,91,92,1001 */
-+	/* try to do this in an intelligent way */
-+	/* get all small commandos */
-+	switch(m)
-+	{
-+		case 7:
-+		case 9:
-+		case 22:
-+		case 23:
-+		case 26:
-+		case 28:
-+		case 50:
-+		case 51:
-+		case 60:
-+		case 91:
-+		case 92:
-+		case 1001:
-+#ifdef IPP2P_DEBUG_SOUL
-+		printk(KERN_DEBUG "2: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 3);
-+	}
-+	
-+	if (m > 0 && m < 6 ) 
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+		printk(KERN_DEBUG "3: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 4);
-+	}
-+	if (m > 12 && m < 19 )
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+		printk(KERN_DEBUG "4: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 5);
-+	}
-+
-+	if (m > 34 && m < 38 )
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+		printk(KERN_DEBUG "5: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 6);
-+	}
-+
-+	if (m > 39 && m < 47 )
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+		printk(KERN_DEBUG "6: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 7);
-+	}
-+
-+	if (m > 61 && m < 70 ) 
-+	{
-+#ifdef IPP2P_DEBUG_SOUL
-+		printk(KERN_DEBUG "7: Soulseek command 0x%x recognized\n",get_u16(payload, 4));
-+#endif /* IPP2P_DEBUG_SOUL */
-+		return ((IPP2P_SOUL * 100) + 8);
-+	}
-+
-+#ifdef IPP2P_DEBUG_SOUL
-+	printk(KERN_DEBUG "unknown SOULSEEK command: 0x%x, first 16 bit: 0x%x, first 8 bit: 0x%x ,soulseek ???\n",get_u32(payload, 4),get_u16(payload, 4) >> 16,get_u8(payload, 4) >> 24);
-+#endif /* IPP2P_DEBUG_SOUL */
-+    }
-+	
-+	/* match 14 00 00 00 01 yy 00 00 00 STRING(YY) 01 00 00 00 00 46|50 00 00 00 00 */
-+	/* without size at the beginning !!! */
-+	if ( get_u32(payload, 0) == 0x14 && get_u8(payload, 4) == 0x01 )
-+	{
-+		__u32 y=get_u32(payload, 5);
-+		/* we need 19 chars + string */
-+		if ( (y + 19) <= (plen) )
-+		{
-+			const unsigned char *w=payload+9+y;
-+			if (get_u32(w, 0) == 0x01 && ( get_u16(w, 4) == 0x4600 || get_u16(w, 4) == 0x5000) && get_u32(w, 6) == 0x00);
-+#ifdef IPP2P_DEBUG_SOUL
-+	    		printk(KERN_DEBUG "Soulssek special client command recognized\n");
-+#endif /* IPP2P_DEBUG_SOUL */
-+	    		return ((IPP2P_SOUL * 100) + 9);
-+		}
-+	}
-+    return 0;
-+}
-+
-+
-+/*Search for WinMX commands*/
-+int
-+search_winmx (const unsigned char *payload, const u16 plen)
-+{
-+//#define IPP2P_DEBUG_WINMX
-+    if (((plen) == 4) && (memcmp(payload, "SEND", 4) == 0))  return ((IPP2P_WINMX * 100) + 1);
-+    if (((plen) == 3) && (memcmp(payload, "GET", 3) == 0))  return ((IPP2P_WINMX * 100) + 2);
-+    //if (packet_len < (head_len + 10)) return 0;
-+    if (plen < 10) return 0;
-+    
-+    if ((memcmp(payload, "SEND", 4) == 0) || (memcmp(payload, "GET", 3) == 0)){
-+        u16 c=4;
-+        const u16 end=plen-2;
-+        u8 count=0;
-+        while (c < end)
-+        {
-+        	if (payload[c]== 0x20 && payload[c+1] == 0x22)
-+        	{
-+        		c++;
-+        		count++;
-+        		if (count>=2) return ((IPP2P_WINMX * 100) + 3);
-+        	}
-+        	c++;
-+        }
-+    }
-+    
-+    if ( plen == 149 && payload[0] == '8' )
-+    {
-+#ifdef IPP2P_DEBUG_WINMX
-+    	printk(KERN_INFO "maybe WinMX\n");
-+#endif
-+    	if (get_u32(payload,17) == 0 && get_u32(payload,21) == 0 && get_u32(payload,25) == 0 &&
-+//    	    get_u32(payload,33) == __constant_htonl(0x71182b1a) && get_u32(payload,37) == __constant_htonl(0x05050000) &&
-+//    	    get_u32(payload,133) == __constant_htonl(0x31097edf) && get_u32(payload,145) == __constant_htonl(0xdcb8f792))
-+    	    get_u16(payload,39) == 0 && get_u16(payload,135) == __constant_htons(0x7edf) && get_u16(payload,147) == __constant_htons(0xf792))
-+    	    
-+    	{
-+#ifdef IPP2P_DEBUG_WINMX
-+    		printk(KERN_INFO "got WinMX\n");
-+#endif
-+    		return ((IPP2P_WINMX * 100) + 4);
-+    	}
-+    }
-+    return 0;
-+} /*search_winmx*/
-+
-+
-+/*Search for appleJuice commands*/
-+int
-+search_apple (const unsigned char *payload, const u16 plen)
-+{
-+    if ( (plen > 7) && (payload[6] == 0x0d) && (payload[7] == 0x0a) && (memcmp(payload, "ajprot", 6) == 0))  return (IPP2P_APPLE * 100);
-+    
-+    return 0;
-+}
-+
-+
-+/*Search for BitTorrent commands*/
-+int
-+search_bittorrent (const unsigned char *payload, const u16 plen)
-+{
-+    if (plen > 20)
-+    {
-+	/* test for match 0x13+"BitTorrent protocol" */
-+	if (payload[0] == 0x13) 
-+	{
-+		if (memcmp(payload+1, "BitTorrent protocol", 19) == 0) return (IPP2P_BIT * 100);
-+	}
-+	
-+	/* get tracker commandos, all starts with GET /
-+	* then it can follow: scrape| announce
-+	* and then ?hash_info=
-+	*/
-+	if (memcmp(payload,"GET /",5) == 0)
-+	{
-+		/* message scrape */
-+		if ( memcmp(payload+5,"scrape?info_hash=",17)==0 ) return (IPP2P_BIT * 100 + 1);
-+		/* message announce */
-+		if ( memcmp(payload+5,"announce?info_hash=",19)==0 ) return (IPP2P_BIT * 100 + 2);
-+	}
-+    } 
-+    else 
-+    {
-+    	/* bitcomet encryptes the first packet, so we have to detect another 
-+    	 * one later in the flow */
-+    	 /* first try failed, too many missdetections */
-+    	//if ( size == 5 && get_u32(t,0) == __constant_htonl(1) && t[4] < 3) return (IPP2P_BIT * 100 + 3);
-+    	
-+    	/* second try: block request packets */
-+    	if ( plen == 17 && get_u32(payload,0) == __constant_htonl(0x0d) && payload[4] == 0x06 && get_u32(payload,13) == __constant_htonl(0x4000) ) return (IPP2P_BIT * 100 + 3);
-+    }
-+
-+    return 0;
-+}
-+
-+
-+
-+/*check for Kazaa get command*/
-+int
-+search_kazaa (const unsigned char *payload, const u16 plen)
-+
-+{
-+    if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a) && memcmp(payload, "GET /.hash=", 11) == 0)
-+	return (IPP2P_DATA_KAZAA * 100);
-+
-+    return 0;
-+}
-+
-+
-+/*check for gnutella get command*/
-+int
-+search_gnu (const unsigned char *payload, const u16 plen)
-+{
-+    if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a))
-+    {
-+	if (memcmp(payload, "GET /get/", 9) == 0)	return ((IPP2P_DATA_GNU * 100) + 1);
-+	if (memcmp(payload, "GET /uri-res/", 13) == 0) return ((IPP2P_DATA_GNU * 100) + 2); 
-+    }
-+    return 0;
-+}
-+
-+
-+/*check for gnutella get commands and other typical data*/
-+int
-+search_all_gnu (const unsigned char *payload, const u16 plen)
-+{
-+    
-+    if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a))
-+    {
-+	
-+	if (memcmp(payload, "GNUTELLA CONNECT/", 17) == 0) return ((IPP2P_GNU * 100) + 1);
-+	if (memcmp(payload, "GNUTELLA/", 9) == 0) return ((IPP2P_GNU * 100) + 2);    
-+    
-+    
-+	if ((memcmp(payload, "GET /get/", 9) == 0) || (memcmp(payload, "GET /uri-res/", 13) == 0))
-+	{        
-+		u16 c=8;
-+		const u16 end=plen-22;
-+		while (c < end) {
-+			if ( payload[c] == 0x0a && payload[c+1] == 0x0d && ((memcmp(&payload[c+2], "X-Gnutella-", 11) == 0) || (memcmp(&payload[c+2], "X-Queue:", 8) == 0))) 
-+				return ((IPP2P_GNU * 100) + 3);
-+			c++;
-+		}
-+	}
-+    }
-+    return 0;
-+}
-+
-+
-+/*check for KaZaA download commands and other typical data*/
-+int
-+search_all_kazaa (const unsigned char *payload, const u16 plen)
-+{
-+    if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a))
-+    {
-+
-+	if (memcmp(payload, "GIVE ", 5) == 0) return ((IPP2P_KAZAA * 100) + 1);
-+    
-+    	if (memcmp(payload, "GET /", 5) == 0) {
-+		u16 c = 8;
-+		const u16 end=plen-22;
-+		while (c < end) {
-+			if ( payload[c] == 0x0a && payload[c+1] == 0x0d && ((memcmp(&payload[c+2], "X-Kazaa-Username: ", 18) == 0) || (memcmp(&payload[c+2], "User-Agent: PeerEnabler/", 24) == 0)))
-+				return ((IPP2P_KAZAA * 100) + 2);
-+			c++;
-+		}
-+	}
-+    }
-+    return 0;
-+}
-+
-+/*fast check for edonkey file segment transfer command*/
-+int
-+search_edk (const unsigned char *payload, const u16 plen)
-+{
-+    if (payload[0] != 0xe3) 
-+	return 0;
-+    else {
-+	if (payload[5] == 0x47) 
-+	    return (IPP2P_DATA_EDK * 100);
-+	else 	
-+	    return 0;
-+    }
-+}
-+
-+
-+
-+/*intensive but slower search for some edonkey packets including size-check*/
-+int
-+search_all_edk (const unsigned char *payload, const u16 plen)
-+{
-+    if (payload[0] != 0xe3) 
-+	return 0;
-+    else {
-+	//t += head_len;	
-+	const u16 cmd = get_u16(payload, 1);
-+	if (cmd == (plen - 5)) {
-+	    switch (payload[5]) {
-+		case 0x01: return ((IPP2P_EDK * 100) + 1);	/*Client: hello or Server:hello*/
-+		case 0x4c: return ((IPP2P_EDK * 100) + 9);	/*Client: Hello-Answer*/
-+	    }
-+	}
-+	return 0;
-+     }
-+}
-+
-+
-+/*fast check for Direct Connect send command*/
-+int
-+search_dc (const unsigned char *payload, const u16 plen)
-+{
-+
-+    if (payload[0] != 0x24 ) 
-+	return 0;
-+    else {
-+	if (memcmp(&payload[1], "Send|", 5) == 0)
-+	    return (IPP2P_DATA_DC * 100);
-+	else
-+	    return 0;
-+    }	
-+
-+}
-+
-+
-+/*intensive but slower check for all direct connect packets*/
-+int
-+search_all_dc (const unsigned char *payload, const u16 plen)
-+{
-+//    unsigned char *t = haystack;
-+
-+    if (payload[0] == 0x24 && payload[plen-1] == 0x7c) 
-+    {
-+    	const unsigned char *t=&payload[1];
-+    		/* Client-Hub-Protocol */
-+	if (memcmp(t, "Lock ", 5) == 0)	 		return ((IPP2P_DC * 100) + 1);
-+	/* Client-Client-Protocol, some are already recognized by client-hub (like lock) */
-+	if (memcmp(t, "MyNick ", 7) == 0)	 	return ((IPP2P_DC * 100) + 38); 
-+    }
-+    return 0;
-+}
-+
-+/*check for mute*/
-+int
-+search_mute (const unsigned char *payload, const u16 plen)
-+{
-+	if ( plen == 209 || plen == 345 || plen == 473 || plen == 609 || plen == 1121 )
-+	{
-+		//printk(KERN_DEBUG "size hit: %u",size);
-+		if (memcmp(payload,"PublicKey: ",11) == 0 )
-+		{ 
-+			return ((IPP2P_MUTE * 100) + 0);
-+			
-+/*			if (memcmp(t+size-14,"\x0aEndPublicKey\x0a",14) == 0)
-+			{
-+				printk(KERN_DEBUG "end pubic key hit: %u",size);
-+				
-+			}*/
-+		}
-+	}
-+	return 0;
-+}
-+
-+
-+/* check for xdcc */
-+int
-+search_xdcc (const unsigned char *payload, const u16 plen)
-+{
-+	/* search in small packets only */
-+	if (plen > 20 && plen < 200 && payload[plen-1] == 0x0a && payload[plen-2] == 0x0d && memcmp(payload,"PRIVMSG ",8) == 0)
-+	{
-+		
-+		u16 x=10;
-+		const u16 end=plen - 13;
-+		
-+		/* is seems to be a irc private massage, chedck for xdcc command */
-+		while (x < end)
-+		{
-+			if (payload[x] == ':')
-+			{
-+				if ( memcmp(&payload[x+1],"xdcc send #",11) == 0 )
-+					return ((IPP2P_XDCC * 100) + 0);
-+			}
-+			x++;
-+		}
-+	}
-+	return 0;
-+}
-+
-+/* search for waste */
-+int search_waste(const unsigned char *payload, const u16 plen)
-+{
-+	if ( plen >= 8 && memcmp(payload,"GET.sha1:",9) == 0)
-+		return ((IPP2P_WASTE * 100) + 0);
-+
-+	return 0;
-+}
-+
-+
-+static struct {
-+    int command;
-+    __u8 short_hand;			/*for fucntions included in short hands*/
-+    int packet_len;
-+    int (*function_name) (const unsigned char *, const u16);
-+} matchlist[] = {
-+    {IPP2P_EDK,SHORT_HAND_IPP2P,20, &search_all_edk},
-+//    {IPP2P_DATA_KAZAA,SHORT_HAND_DATA,200, &search_kazaa},
-+//    {IPP2P_DATA_EDK,SHORT_HAND_DATA,60, &search_edk},
-+//    {IPP2P_DATA_DC,SHORT_HAND_DATA,26, &search_dc},
-+    {IPP2P_DC,SHORT_HAND_IPP2P,5, search_all_dc},
-+//    {IPP2P_DATA_GNU,SHORT_HAND_DATA,40, &search_gnu},
-+    {IPP2P_GNU,SHORT_HAND_IPP2P,5, &search_all_gnu},
-+    {IPP2P_KAZAA,SHORT_HAND_IPP2P,5, &search_all_kazaa},
-+    {IPP2P_BIT,SHORT_HAND_IPP2P,20, &search_bittorrent},
-+    {IPP2P_APPLE,SHORT_HAND_IPP2P,5, &search_apple},
-+    {IPP2P_SOUL,SHORT_HAND_IPP2P,5, &search_soul},
-+    {IPP2P_WINMX,SHORT_HAND_IPP2P,2, &search_winmx},
-+    {IPP2P_ARES,SHORT_HAND_IPP2P,5, &search_ares},
-+    {IPP2P_MUTE,SHORT_HAND_NONE,200, &search_mute},
-+    {IPP2P_WASTE,SHORT_HAND_NONE,5, &search_waste},
-+    {IPP2P_XDCC,SHORT_HAND_NONE,5, &search_xdcc},
-+    {0,0,0,NULL}
-+};
-+
-+
-+static struct {
-+    int command;
-+    __u8 short_hand;			/*for fucntions included in short hands*/
-+    int packet_len;
-+    int (*function_name) (unsigned char *, int);
-+} udp_list[] = {
-+    {IPP2P_KAZAA,SHORT_HAND_IPP2P,14, &udp_search_kazaa},
-+    {IPP2P_BIT,SHORT_HAND_IPP2P,23, &udp_search_bit},
-+    {IPP2P_GNU,SHORT_HAND_IPP2P,11, &udp_search_gnu},
-+    {IPP2P_EDK,SHORT_HAND_IPP2P,9, &udp_search_edk},
-+    {IPP2P_DC,SHORT_HAND_IPP2P,12, &udp_search_directconnect},    
-+    {0,0,0,NULL}
-+};
-+
-+
-+static int
-+match(const struct sk_buff *skb,
-+      const struct net_device *in,
-+      const struct net_device *out,
-+      const void *matchinfo,
-+      int offset,
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-+      const void *hdr,
-+      u_int16_t datalen,
-+#endif
-+
-+      int *hotdrop)
-+{
-+    const struct ipt_p2p_info *info = matchinfo;
-+    unsigned char  *haystack;
-+    struct iphdr *ip = skb->nh.iph;
-+    int p2p_result = 0, i = 0;
-+//    int head_len;
-+    int hlen = ntohs(ip->tot_len)-(ip->ihl*4);	/*hlen = packet-data length*/
-+
-+    /*must not be a fragment*/
-+    if (offset) {
-+	if (info->debug) printk("IPP2P.match: offset found %i \n",offset);
-+	return 0;
-+    }
-+    
-+    /*make sure that skb is linear*/
-+    if(skb_is_nonlinear(skb)){
-+	if (info->debug) printk("IPP2P.match: nonlinear skb found\n");
-+	return 0;
-+    }
-+
-+
-+    haystack=(char *)ip+(ip->ihl*4);		/*haystack = packet data*/
-+
-+    switch (ip->protocol){
-+	case IPPROTO_TCP:		/*what to do with a TCP packet*/
-+	{
-+	    struct tcphdr *tcph = (void *) ip + ip->ihl * 4;
-+	    
-+	    if (tcph->fin) return 0;  /*if FIN bit is set bail out*/
-+	    if (tcph->syn) return 0;  /*if SYN bit is set bail out*/
-+	    if (tcph->rst) return 0;  /*if RST bit is set bail out*/
-+	    
-+	    haystack += tcph->doff * 4; /*get TCP-Header-Size*/
-+	    hlen -= tcph->doff * 4;
-+	    while (matchlist[i].command) {
-+		if ((((info->cmd & matchlist[i].command) == matchlist[i].command) ||
-+		    ((info->cmd & matchlist[i].short_hand) == matchlist[i].short_hand)) &&
-+		    (hlen > matchlist[i].packet_len)) {
-+			    p2p_result = matchlist[i].function_name(haystack, hlen);
-+			    if (p2p_result) 
-+			    {
-+				if (info->debug) printk("IPP2P.debug:TCP-match: %i from: %u.%u.%u.%u:%i to: %u.%u.%u.%u:%i Length: %i\n", 
-+				    p2p_result, NIPQUAD(ip->saddr),ntohs(tcph->source), NIPQUAD(ip->daddr),ntohs(tcph->dest),hlen);
-+				return p2p_result;
-+    			    }
-+    		}
-+	    i++;
-+	    }
-+	    return p2p_result;
-+	}
-+	
-+	case IPPROTO_UDP:		/*what to do with an UDP packet*/
-+	{
-+	    struct udphdr *udph = (void *) ip + ip->ihl * 4;
-+	    
-+	    while (udp_list[i].command){
-+		if ((((info->cmd & udp_list[i].command) == udp_list[i].command) ||
-+		    ((info->cmd & udp_list[i].short_hand) == udp_list[i].short_hand)) &&
-+		    (hlen > udp_list[i].packet_len)) {
-+			    p2p_result = udp_list[i].function_name(haystack, hlen);
-+			    if (p2p_result){
-+				if (info->debug) printk("IPP2P.debug:UDP-match: %i from: %u.%u.%u.%u:%i to: %u.%u.%u.%u:%i Length: %i\n", 
-+				    p2p_result, NIPQUAD(ip->saddr),ntohs(udph->source), NIPQUAD(ip->daddr),ntohs(udph->dest),hlen);
-+				return p2p_result;
-+			    }
-+		}
-+	    i++;
-+	    }			
-+	    return p2p_result;
-+	}
-+    
-+	default: return 0;
-+    }
-+}
-+
-+
-+
-+static int
-+checkentry(const char *tablename,
-+            const struct ipt_ip *ip,
-+	    void *matchinfo,
-+	    unsigned int matchsize,
-+	    unsigned int hook_mask)
-+{
-+        /* Must specify -p tcp */
-+/*    if (ip->proto != IPPROTO_TCP || (ip->invflags & IPT_INV_PROTO)) {
-+ *	printk("ipp2p: Only works on TCP packets, use -p tcp\n");
-+ *	return 0;
-+ *    }*/
-+    return 1;
-+}
-+									    
-+
-+
-+
-+static struct ipt_match ipp2p_match = { 
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-+	{ NULL, NULL }, 
-+	"ipp2p", 
-+	&match, 
-+	&checkentry, 
-+	NULL, 
-+	THIS_MODULE
-+#endif
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+	.name		= "ipp2p",
-+	.match		= &match,
-+	.checkentry	= &checkentry,
-+	.me		= THIS_MODULE,
-+#endif
-+};
-+
-+
-+static int __init init(void)
-+{
-+    printk(KERN_INFO "IPP2P v%s loading\n", IPP2P_VERSION);
-+    return ipt_register_match(&ipp2p_match);
-+}
-+	
-+static void __exit fini(void)
-+{
-+    ipt_unregister_match(&ipp2p_match);
-+    printk(KERN_INFO "IPP2P v%s unloaded\n", IPP2P_VERSION);    
-+}
-+	
-+module_init(init);
-+module_exit(fini);
-+
-+
diff --git a/openwrt/target/linux/generic-2.6/patches/102-openswan-2.4.0.kernel-2.6-natt.patch b/openwrt/target/linux/generic-2.6/patches/102-openswan-2.4.0.kernel-2.6-natt.patch
deleted file mode 100644
index 6d6939beee..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/102-openswan-2.4.0.kernel-2.6-natt.patch
+++ /dev/null
@@ -1,171 +0,0 @@
-diff -Nur linux-2.6.16/include/net/xfrmudp.h linux-2.6.16-owrt/include/net/xfrmudp.h
---- linux-2.6.16/include/net/xfrmudp.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/net/xfrmudp.h	2006-03-22 21:39:54.000000000 +0100
-@@ -0,0 +1,10 @@
-+/*
-+ * pointer to function for type that xfrm4_input wants, to permit
-+ * decoupling of XFRM from udp.c
-+ */
-+#define HAVE_XFRM4_UDP_REGISTER
-+
-+typedef int (*xfrm4_rcv_encap_t)(struct sk_buff *skb, __u16 encap_type);
-+extern int udp4_register_esp_rcvencap(xfrm4_rcv_encap_t func
-+				      , xfrm4_rcv_encap_t *oldfunc);
-+extern int udp4_unregister_esp_rcvencap(xfrm4_rcv_encap_t func);
-diff -Nur linux-2.6.16/net/ipv4/Kconfig linux-2.6.16-owrt/net/ipv4/Kconfig
---- linux-2.6.16/net/ipv4/Kconfig	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/Kconfig	2006-03-22 21:49:04.000000000 +0100
-@@ -271,6 +271,12 @@
- 	  Network), but can be distributed all over the Internet. If you want
- 	  to do that, say Y here and to "IP multicast routing" below.
- 
-+config IPSEC_NAT_TRAVERSAL
-+	bool "IPSEC NAT-Traversal (KLIPS compatible)"
-+	depends on INET
-+	---help---
-+          Includes support for RFC3947/RFC3948 NAT-Traversal of ESP over UDP.
-+
- config IP_MROUTE
- 	bool "IP: multicast routing"
- 	depends on IP_MULTICAST
-diff -Nur linux-2.6.16/net/ipv4/udp.c linux-2.6.16-owrt/net/ipv4/udp.c
---- linux-2.6.16/net/ipv4/udp.c	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/udp.c	2006-03-22 21:39:54.000000000 +0100
-@@ -109,11 +109,14 @@
- #include <net/inet_common.h>
- #include <net/checksum.h>
- #include <net/xfrm.h>
-+#include <net/xfrmudp.h>
- 
- /*
-  *	Snmp MIB for the UDP layer
-  */
- 
-+static xfrm4_rcv_encap_t xfrm4_rcv_encap_func;
-+
- DEFINE_SNMP_STAT(struct udp_mib, udp_statistics) __read_mostly;
- 
- struct hlist_head udp_hash[UDP_HTABLE_SIZE];
-@@ -882,6 +885,42 @@
- 	sk_common_release(sk);
- }
- 
-+#if defined(CONFIG_XFRM) || defined(CONFIG_IPSEC_NAT_TRAVERSAL)
-+
-+/* if XFRM isn't a module, then register it directly. */
-+#if 0 && !defined(CONFIG_XFRM_MODULE) && !defined(CONFIG_IPSEC_NAT_TRAVERSAL)
-+static xfrm4_rcv_encap_t xfrm4_rcv_encap_func = xfrm4_rcv_encap;
-+#else
-+static xfrm4_rcv_encap_t xfrm4_rcv_encap_func = NULL;
-+#endif
-+
-+int udp4_register_esp_rcvencap(xfrm4_rcv_encap_t func
-+			       , xfrm4_rcv_encap_t *oldfunc)
-+{
-+  if(oldfunc != NULL) {
-+    *oldfunc = xfrm4_rcv_encap_func;
-+  }
-+
-+#if 0
-+  if(xfrm4_rcv_encap_func != NULL)
-+    return -1;
-+#endif
-+
-+  xfrm4_rcv_encap_func = func;
-+  return 0;
-+}
-+
-+int udp4_unregister_esp_rcvencap(xfrm4_rcv_encap_t func)
-+{
-+  if(xfrm4_rcv_encap_func != func)
-+    return -1;
-+
-+  xfrm4_rcv_encap_func = NULL;
-+  return 0;
-+}
-+#endif /* CONFIG_XFRM_MODULE || CONFIG_IPSEC_NAT_TRAVERSAL */
-+
-+
- /* return:
-  * 	1  if the the UDP system should process it
-  *	0  if we should drop this packet
-@@ -889,9 +928,9 @@
-  */
- static int udp_encap_rcv(struct sock * sk, struct sk_buff *skb)
- {
--#ifndef CONFIG_XFRM
-+#if !defined(CONFIG_XFRM) && !defined(CONFIG_IPSEC_NAT_TRAVERSAL)
- 	return 1; 
--#else
-+#else /* either CONFIG_XFRM or CONFIG_IPSEC_NAT_TRAVERSAL */
- 	struct udp_sock *up = udp_sk(sk);
-   	struct udphdr *uh = skb->h.uh;
- 	struct iphdr *iph;
-@@ -903,11 +942,11 @@
- 
- 	/* if we're overly short, let UDP handle it */
- 	if (udpdata > skb->tail)
--		return 1;
-+		return 2;
- 
- 	/* if this is not encapsulated socket, then just return now */
- 	if (!encap_type)
--		return 1;
-+		return 3;
- 
- 	len = skb->tail - udpdata;
- 
-@@ -922,7 +961,7 @@
- 			len = sizeof(struct udphdr);
- 		} else
- 			/* Must be an IKE packet.. pass it through */
--			return 1;
-+			return 4;
- 		break;
- 	case UDP_ENCAP_ESPINUDP_NON_IKE:
- 		/* Check if this is a keepalive packet.  If so, eat it. */
-@@ -935,7 +974,7 @@
- 			len = sizeof(struct udphdr) + 2 * sizeof(u32);
- 		} else
- 			/* Must be an IKE packet.. pass it through */
--			return 1;
-+			return 5;
- 		break;
- 	}
- 
-@@ -946,6 +985,8 @@
- 	 */
- 	if (skb_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
- 		return 0;
-+	if (skb_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
-+		return 0;
- 
- 	/* Now we can update and verify the packet length... */
- 	iph = skb->nh.iph;
-@@ -1010,9 +1051,13 @@
- 			return 0;
- 		}
- 		if (ret < 0) {
--			/* process the ESP packet */
--			ret = xfrm4_rcv_encap(skb, up->encap_type);
--			UDP_INC_STATS_BH(UDP_MIB_INDATAGRAMS);
-+			if(xfrm4_rcv_encap_func != NULL) {
-+			  ret = (*xfrm4_rcv_encap_func)(skb, up->encap_type);
-+			  UDP_INC_STATS_BH(UDP_MIB_INDATAGRAMS);
-+			} else {
-+			  UDP_INC_STATS_BH(UDP_MIB_INERRORS);
-+			  ret = 1;
-+			}
- 			return -ret;
- 		}
- 		/* FALLTHROUGH -- it's a UDP Packet */
-@@ -1559,3 +1604,9 @@
- EXPORT_SYMBOL(udp_proc_register);
- EXPORT_SYMBOL(udp_proc_unregister);
- #endif
-+
-+#if defined(CONFIG_IPSEC_NAT_TRAVERSAL)
-+EXPORT_SYMBOL(udp4_register_esp_rcvencap);
-+EXPORT_SYMBOL(udp4_unregister_esp_rcvencap);
-+#endif
-+
diff --git a/openwrt/target/linux/generic-2.6/patches/103-netfilter-ipset.patch b/openwrt/target/linux/generic-2.6/patches/103-netfilter-ipset.patch
deleted file mode 100644
index fb75c8b7eb..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/103-netfilter-ipset.patch
+++ /dev/null
@@ -1,5739 +0,0 @@
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ip_set.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ip_set.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set.h	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,489 @@
-+#ifndef _IP_SET_H
-+#define _IP_SET_H
-+
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ *                         Patrick Schaaf <bof@bof.de>
-+ *                         Martin Josefsson <gandalf@wlug.westbo.se>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/*
-+ * A sockopt of such quality has hardly ever been seen before on the open
-+ * market!  This little beauty, hardly ever used: above 64, so it's
-+ * traditionally used for firewalling, not touched (even once!) by the
-+ * 2.0, 2.2 and 2.4 kernels!
-+ *
-+ * Comes with its own certificate of authenticity, valid anywhere in the
-+ * Free world!
-+ *
-+ * Rusty, 19.4.2000
-+ */
-+#define SO_IP_SET 		83
-+
-+/*
-+ * Heavily modify by Joakim Axelsson 08.03.2002
-+ * - Made it more modulebased
-+ *
-+ * Additional heavy modifications by Jozsef Kadlecsik 22.02.2004
-+ * - bindings added
-+ * - in order to "deal with" backward compatibility, renamed to ipset
-+ */
-+
-+/* 
-+ * Used so that the kernel module and ipset-binary can match their versions 
-+ */
-+#define IP_SET_PROTOCOL_VERSION 2
-+
-+#define IP_SET_MAXNAMELEN 32	/* set names and set typenames */
-+
-+/* Lets work with our own typedef for representing an IP address.
-+ * We hope to make the code more portable, possibly to IPv6...
-+ *
-+ * The representation works in HOST byte order, because most set types
-+ * will perform arithmetic operations and compare operations.
-+ * 
-+ * For now the type is an uint32_t.
-+ *
-+ * Make sure to ONLY use the functions when translating and parsing
-+ * in order to keep the host byte order and make it more portable:
-+ *  parse_ip()
-+ *  parse_mask()
-+ *  parse_ipandmask()
-+ *  ip_tostring()
-+ * (Joakim: where are they???)
-+ */
-+
-+typedef uint32_t ip_set_ip_t;
-+
-+/* Sets are identified by an id in kernel space. Tweak with ip_set_id_t
-+ * and IP_SET_INVALID_ID if you want to increase the max number of sets.
-+ */
-+typedef uint16_t ip_set_id_t;
-+
-+#define IP_SET_INVALID_ID	65535
-+
-+/* How deep we follow bindings */
-+#define IP_SET_MAX_BINDINGS	6
-+
-+/*
-+ * Option flags for kernel operations (ipt_set_info)
-+ */
-+#define IPSET_SRC 		0x01	/* Source match/add */
-+#define IPSET_DST		0x02	/* Destination match/add */
-+#define IPSET_MATCH_INV		0x04	/* Inverse matching */
-+
-+/*
-+ * Set types (flavours)
-+ */
-+#define IPSET_TYPE_IP		0	/* IP address type of set */
-+#define IPSET_TYPE_PORT		1	/* Port type of set */
-+
-+/* Reserved keywords */
-+#define IPSET_TOKEN_DEFAULT	":default:"
-+#define IPSET_TOKEN_ALL		":all:"
-+
-+/* SO_IP_SET operation constants, and their request struct types.
-+ *
-+ * Operation ids:
-+ *	  0-99:	 commands with version checking
-+ *	100-199: add/del/test/bind/unbind
-+ *	200-299: list, save, restore
-+ */
-+
-+/* Single shot operations: 
-+ * version, create, destroy, flush, rename and swap 
-+ *
-+ * Sets are identified by name.
-+ */
-+
-+#define IP_SET_REQ_STD		\
-+	unsigned op;		\
-+	unsigned version;	\
-+	char name[IP_SET_MAXNAMELEN]
-+
-+#define IP_SET_OP_CREATE	0x00000001	/* Create a new (empty) set */
-+struct ip_set_req_create {
-+	IP_SET_REQ_STD;
-+	char typename[IP_SET_MAXNAMELEN];
-+};
-+
-+#define IP_SET_OP_DESTROY	0x00000002	/* Remove a (empty) set */
-+struct ip_set_req_std {
-+	IP_SET_REQ_STD;
-+};
-+
-+#define IP_SET_OP_FLUSH		0x00000003	/* Remove all IPs in a set */
-+/* Uses ip_set_req_std */
-+
-+#define IP_SET_OP_RENAME	0x00000004	/* Rename a set */
-+/* Uses ip_set_req_create */
-+
-+#define IP_SET_OP_SWAP		0x00000005	/* Swap two sets */
-+/* Uses ip_set_req_create */
-+
-+union ip_set_name_index {
-+	char name[IP_SET_MAXNAMELEN];
-+	ip_set_id_t index;
-+};
-+
-+#define IP_SET_OP_GET_BYNAME	0x00000006	/* Get set index by name */
-+struct ip_set_req_get_set {
-+	unsigned op;
-+	unsigned version;
-+	union ip_set_name_index set;
-+};
-+
-+#define IP_SET_OP_GET_BYINDEX	0x00000007	/* Get set name by index */
-+/* Uses ip_set_req_get_set */
-+
-+#define IP_SET_OP_VERSION	0x00000100	/* Ask kernel version */
-+struct ip_set_req_version {
-+	unsigned op;
-+	unsigned version;
-+};
-+
-+/* Double shots operations: 
-+ * add, del, test, bind and unbind.
-+ *
-+ * First we query the kernel to get the index and type of the target set,
-+ * then issue the command. Validity of IP is checked in kernel in order
-+ * to minimalize sockopt operations.
-+ */
-+
-+/* Get minimal set data for add/del/test/bind/unbind IP */
-+#define IP_SET_OP_ADT_GET	0x00000010	/* Get set and type */
-+struct ip_set_req_adt_get {
-+	unsigned op;
-+	unsigned version;
-+	union ip_set_name_index set;
-+	char typename[IP_SET_MAXNAMELEN];
-+};
-+
-+#define IP_SET_REQ_BYINDEX	\
-+	unsigned op;		\
-+	ip_set_id_t index;
-+
-+struct ip_set_req_adt {
-+	IP_SET_REQ_BYINDEX;
-+};
-+
-+#define IP_SET_OP_ADD_IP	0x00000101	/* Add an IP to a set */
-+/* Uses ip_set_req_adt, with type specific addage */
-+
-+#define IP_SET_OP_DEL_IP	0x00000102	/* Remove an IP from a set */
-+/* Uses ip_set_req_adt, with type specific addage */
-+
-+#define IP_SET_OP_TEST_IP	0x00000103	/* Test an IP in a set */
-+/* Uses ip_set_req_adt, with type specific addage */
-+
-+#define IP_SET_OP_BIND_SET	0x00000104	/* Bind an IP to a set */
-+/* Uses ip_set_req_bind, with type specific addage */
-+struct ip_set_req_bind {
-+	IP_SET_REQ_BYINDEX;
-+	char binding[IP_SET_MAXNAMELEN];
-+};
-+
-+#define IP_SET_OP_UNBIND_SET	0x00000105	/* Unbind an IP from a set */
-+/* Uses ip_set_req_bind, with type speficic addage 
-+ * index = 0 means unbinding for all sets */
-+
-+#define IP_SET_OP_TEST_BIND_SET	0x00000106	/* Test binding an IP to a set */
-+/* Uses ip_set_req_bind, with type specific addage */
-+
-+/* Multiple shots operations: list, save, restore.
-+ *
-+ * - check kernel version and query the max number of sets
-+ * - get the basic information on all sets
-+ *   and size required for the next step
-+ * - get actual set data: header, data, bindings
-+ */
-+
-+/* Get max_sets and the index of a queried set
-+ */
-+#define IP_SET_OP_MAX_SETS	0x00000020
-+struct ip_set_req_max_sets {
-+	unsigned op;
-+	unsigned version;
-+	ip_set_id_t max_sets;		/* max_sets */
-+	ip_set_id_t sets;		/* real number of sets */
-+	union ip_set_name_index set;	/* index of set if name used */
-+};
-+
-+/* Get the id and name of the sets plus size for next step */
-+#define IP_SET_OP_LIST_SIZE	0x00000201
-+#define IP_SET_OP_SAVE_SIZE	0x00000202
-+struct ip_set_req_setnames {
-+	unsigned op;
-+	ip_set_id_t index;		/* set to list/save */
-+	size_t size;			/* size to get setdata/bindings */
-+	/* followed by sets number of struct ip_set_name_list */
-+};
-+
-+struct ip_set_name_list {
-+	char name[IP_SET_MAXNAMELEN];
-+	char typename[IP_SET_MAXNAMELEN];
-+	ip_set_id_t index;
-+	ip_set_id_t id;
-+};
-+
-+/* The actual list operation */
-+#define IP_SET_OP_LIST		0x00000203
-+struct ip_set_req_list {
-+	IP_SET_REQ_BYINDEX;
-+	/* sets number of struct ip_set_list in reply */ 
-+};
-+
-+struct ip_set_list {
-+	ip_set_id_t index;
-+	ip_set_id_t binding;
-+	u_int32_t ref;
-+	size_t header_size;	/* Set header data of header_size */
-+	size_t members_size;	/* Set members data of members_size */
-+	size_t bindings_size;	/* Set bindings data of bindings_size */
-+};
-+
-+struct ip_set_hash_list {
-+	ip_set_ip_t ip;
-+	ip_set_id_t binding;
-+};
-+
-+/* The save operation */
-+#define IP_SET_OP_SAVE		0x00000204
-+/* Uses ip_set_req_list, in the reply replaced by
-+ * sets number of struct ip_set_save plus a marker
-+ * ip_set_save followed by ip_set_hash_save structures.
-+ */
-+struct ip_set_save {
-+	ip_set_id_t index;
-+	ip_set_id_t binding;
-+	size_t header_size;	/* Set header data of header_size */
-+	size_t members_size;	/* Set members data of members_size */
-+};
-+
-+/* At restoring, ip == 0 means default binding for the given set: */
-+struct ip_set_hash_save {
-+	ip_set_ip_t ip;
-+	ip_set_id_t id;
-+	ip_set_id_t binding;
-+};
-+
-+/* The restore operation */
-+#define IP_SET_OP_RESTORE	0x00000205
-+/* Uses ip_set_req_setnames followed by ip_set_restore structures
-+ * plus a marker ip_set_restore, followed by ip_set_hash_save 
-+ * structures.
-+ */
-+struct ip_set_restore {
-+	char name[IP_SET_MAXNAMELEN];
-+	char typename[IP_SET_MAXNAMELEN];
-+	ip_set_id_t index;
-+	size_t header_size;	/* Create data of header_size */
-+	size_t members_size;	/* Set members data of members_size */
-+};
-+
-+static inline int bitmap_bytes(ip_set_ip_t a, ip_set_ip_t b)
-+{
-+	return 4 * ((((b - a + 8) / 8) + 3) / 4);
-+}
-+
-+#ifdef __KERNEL__
-+
-+#define ip_set_printk(format, args...) 			\
-+	do {							\
-+		printk("%s: %s: ", __FILE__, __FUNCTION__);	\
-+		printk(format "\n" , ## args);			\
-+	} while (0)
-+
-+#if defined(IP_SET_DEBUG)
-+#define DP(format, args...) 					\
-+	do {							\
-+		printk("%s: %s (DBG): ", __FILE__, __FUNCTION__);\
-+		printk(format "\n" , ## args);			\
-+	} while (0)
-+#define IP_SET_ASSERT(x)					\
-+	do {							\
-+		if (!(x))					\
-+			printk("IP_SET_ASSERT: %s:%i(%s)\n",	\
-+				__FILE__, __LINE__, __FUNCTION__); \
-+	} while (0)
-+#else
-+#define DP(format, args...)
-+#define IP_SET_ASSERT(x)
-+#endif
-+
-+struct ip_set;
-+
-+/*
-+ * The ip_set_type definition - one per set type, e.g. "ipmap".
-+ *
-+ * Each individual set has a pointer, set->type, going to one
-+ * of these structures. Function pointers inside the structure implement
-+ * the real behaviour of the sets.
-+ *
-+ * If not mentioned differently, the implementation behind the function
-+ * pointers of a set_type, is expected to return 0 if ok, and a negative
-+ * errno (e.g. -EINVAL) on error.
-+ */
-+struct ip_set_type {
-+	struct list_head list;	/* next in list of set types */
-+
-+	/* test for IP in set (kernel: iptables -m set src|dst)
-+	 * return 0 if not in set, 1 if in set.
-+	 */
-+	int (*testip_kernel) (struct ip_set *set,
-+			      const struct sk_buff * skb, 
-+			      u_int32_t flags,
-+			      ip_set_ip_t *ip);
-+
-+	/* test for IP in set (userspace: ipset -T set IP)
-+	 * return 0 if not in set, 1 if in set.
-+	 */
-+	int (*testip) (struct ip_set *set,
-+		       const void *data, size_t size,
-+		       ip_set_ip_t *ip);
-+
-+	/*
-+	 * Size of the data structure passed by when
-+	 * adding/deletin/testing an entry.
-+	 */
-+	size_t reqsize;
-+
-+	/* Add IP into set (userspace: ipset -A set IP)
-+	 * Return -EEXIST if the address is already in the set,
-+	 * and -ERANGE if the address lies outside the set bounds.
-+	 * If the address was not already in the set, 0 is returned.
-+	 */
-+	int (*addip) (struct ip_set *set, 
-+		      const void *data, size_t size,
-+		      ip_set_ip_t *ip);
-+
-+	/* Add IP into set (kernel: iptables ... -j SET set src|dst)
-+	 * Return -EEXIST if the address is already in the set,
-+	 * and -ERANGE if the address lies outside the set bounds.
-+	 * If the address was not already in the set, 0 is returned.
-+	 */
-+	int (*addip_kernel) (struct ip_set *set,
-+			     const struct sk_buff * skb, 
-+			     u_int32_t flags,
-+			     ip_set_ip_t *ip);
-+
-+	/* remove IP from set (userspace: ipset -D set --entry x)
-+	 * Return -EEXIST if the address is NOT in the set,
-+	 * and -ERANGE if the address lies outside the set bounds.
-+	 * If the address really was in the set, 0 is returned.
-+	 */
-+	int (*delip) (struct ip_set *set, 
-+		      const void *data, size_t size,
-+		      ip_set_ip_t *ip);
-+
-+	/* remove IP from set (kernel: iptables ... -j SET --entry x)
-+	 * Return -EEXIST if the address is NOT in the set,
-+	 * and -ERANGE if the address lies outside the set bounds.
-+	 * If the address really was in the set, 0 is returned.
-+	 */
-+	int (*delip_kernel) (struct ip_set *set,
-+			     const struct sk_buff * skb, 
-+			     u_int32_t flags,
-+			     ip_set_ip_t *ip);
-+
-+	/* new set creation - allocated type specific items
-+	 */
-+	int (*create) (struct ip_set *set,
-+		       const void *data, size_t size);
-+
-+	/* retry the operation after successfully tweaking the set
-+	 */
-+	int (*retry) (struct ip_set *set);
-+
-+	/* set destruction - free type specific items
-+	 * There is no return value.
-+	 * Can be called only when child sets are destroyed.
-+	 */
-+	void (*destroy) (struct ip_set *set);
-+
-+	/* set flushing - reset all bits in the set, or something similar.
-+	 * There is no return value.
-+	 */
-+	void (*flush) (struct ip_set *set);
-+
-+	/* Listing: size needed for header
-+	 */
-+	size_t header_size;
-+
-+	/* Listing: Get the header
-+	 *
-+	 * Fill in the information in "data".
-+	 * This function is always run after list_header_size() under a 
-+	 * writelock on the set. Therefor is the length of "data" always 
-+	 * correct. 
-+	 */
-+	void (*list_header) (const struct ip_set *set, 
-+			     void *data);
-+
-+	/* Listing: Get the size for the set members
-+	 */
-+	int (*list_members_size) (const struct ip_set *set);
-+
-+	/* Listing: Get the set members
-+	 *
-+	 * Fill in the information in "data".
-+	 * This function is always run after list_member_size() under a 
-+	 * writelock on the set. Therefor is the length of "data" always 
-+	 * correct. 
-+	 */
-+	void (*list_members) (const struct ip_set *set,
-+			      void *data);
-+
-+	char typename[IP_SET_MAXNAMELEN];
-+	char typecode;
-+	int protocol_version;
-+
-+	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
-+	struct module *me;
-+};
-+
-+extern int ip_set_register_set_type(struct ip_set_type *set_type);
-+extern void ip_set_unregister_set_type(struct ip_set_type *set_type);
-+
-+/* A generic ipset */
-+struct ip_set {
-+	char name[IP_SET_MAXNAMELEN];	/* the name of the set */
-+	rwlock_t lock;			/* lock for concurrency control */
-+	ip_set_id_t id;			/* set id for swapping */
-+	ip_set_id_t binding;		/* default binding for the set */
-+	atomic_t ref;			/* in kernel and in hash references */
-+	struct ip_set_type *type; 	/* the set types */
-+	void *data;			/* pooltype specific data */
-+};
-+
-+/* Structure to bind set elements to sets */
-+struct ip_set_hash {
-+	struct list_head list;		/* list of clashing entries in hash */
-+	ip_set_ip_t ip;			/* ip from set */
-+	ip_set_id_t id;			/* set id */
-+	ip_set_id_t binding;		/* set we bind the element to */
-+};
-+
-+/* register and unregister set references */
-+extern ip_set_id_t ip_set_get_byname(const char name[IP_SET_MAXNAMELEN]);
-+extern ip_set_id_t ip_set_get_byindex(ip_set_id_t id);
-+extern void ip_set_put(ip_set_id_t id);
-+
-+/* API for iptables set match, and SET target */
-+extern void ip_set_addip_kernel(ip_set_id_t id,
-+				const struct sk_buff *skb,
-+				const u_int32_t *flags);
-+extern void ip_set_delip_kernel(ip_set_id_t id,
-+				const struct sk_buff *skb,
-+				const u_int32_t *flags);
-+extern int ip_set_testip_kernel(ip_set_id_t id,
-+				const struct sk_buff *skb,
-+				const u_int32_t *flags);
-+
-+#endif				/* __KERNEL__ */
-+
-+#endif /*_IP_SET_H*/
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ip_set_iphash.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_iphash.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ip_set_iphash.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_iphash.h	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,30 @@
-+#ifndef __IP_SET_IPHASH_H
-+#define __IP_SET_IPHASH_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "iphash"
-+#define MAX_RANGE 0x0000FFFF
-+
-+struct ip_set_iphash {
-+	ip_set_ip_t *members;		/* the iphash proper */
-+	uint32_t initval;		/* initval for jhash_1word */
-+	uint32_t prime;			/* prime for double hashing */
-+	uint32_t hashsize;		/* hash size */
-+	uint16_t probes;		/* max number of probes  */
-+	uint16_t resize;		/* resize factor in percent */
-+	ip_set_ip_t netmask;		/* netmask */
-+};
-+
-+struct ip_set_req_iphash_create {
-+	uint32_t hashsize;
-+	uint16_t probes;
-+	uint16_t resize;
-+	ip_set_ip_t netmask;
-+};
-+
-+struct ip_set_req_iphash {
-+	ip_set_ip_t ip;
-+};
-+
-+#endif	/* __IP_SET_IPHASH_H */
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ip_set_ipmap.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_ipmap.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ip_set_ipmap.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_ipmap.h	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,56 @@
-+#ifndef __IP_SET_IPMAP_H
-+#define __IP_SET_IPMAP_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "ipmap"
-+#define MAX_RANGE 0x0000FFFF
-+
-+struct ip_set_ipmap {
-+	void *members;			/* the ipmap proper */
-+	ip_set_ip_t first_ip;		/* host byte order, included in range */
-+	ip_set_ip_t last_ip;		/* host byte order, included in range */
-+	ip_set_ip_t netmask;		/* subnet netmask */
-+	ip_set_ip_t sizeid;		/* size of set in IPs */
-+	u_int16_t hosts;		/* number of hosts in a subnet */
-+};
-+
-+struct ip_set_req_ipmap_create {
-+	ip_set_ip_t from;
-+	ip_set_ip_t to;
-+	ip_set_ip_t netmask;
-+};
-+
-+struct ip_set_req_ipmap {
-+	ip_set_ip_t ip;
-+};
-+
-+unsigned int
-+mask_to_bits(ip_set_ip_t mask)
-+{
-+	unsigned int bits = 32;
-+	ip_set_ip_t maskaddr;
-+	
-+	if (mask == 0xFFFFFFFF)
-+		return bits;
-+	
-+	maskaddr = 0xFFFFFFFE;
-+	while (--bits >= 0 && maskaddr != mask)
-+		maskaddr <<= 1;
-+	
-+	return bits;
-+}
-+
-+ip_set_ip_t
-+range_to_mask(ip_set_ip_t from, ip_set_ip_t to, unsigned int *bits)
-+{
-+	ip_set_ip_t mask = 0xFFFFFFFE;
-+	
-+	*bits = 32;
-+	while (--(*bits) >= 0 && mask && (to & mask) != from)
-+		mask <<= 1;
-+		
-+	return mask;
-+}
-+	
-+#endif /* __IP_SET_IPMAP_H */
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ip_set_iptree.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_iptree.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ip_set_iptree.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_iptree.h	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,39 @@
-+#ifndef __IP_SET_IPTREE_H
-+#define __IP_SET_IPTREE_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "iptree"
-+#define MAX_RANGE 0x0000FFFF
-+
-+struct ip_set_iptreed {
-+	unsigned long expires[255];	   	/* x.x.x.ADDR */
-+};
-+
-+struct ip_set_iptreec {
-+	struct ip_set_iptreed *tree[255];	/* x.x.ADDR.* */
-+};
-+
-+struct ip_set_iptreeb {
-+	struct ip_set_iptreec *tree[255];	/* x.ADDR.*.* */
-+};
-+
-+struct ip_set_iptree {
-+	unsigned int timeout;
-+	unsigned int gc_interval;
-+#ifdef __KERNEL__
-+	struct timer_list gc;
-+	struct ip_set_iptreeb *tree[255];	/* ADDR.*.*.* */
-+#endif
-+};
-+
-+struct ip_set_req_iptree_create {
-+	unsigned int timeout;
-+};
-+
-+struct ip_set_req_iptree {
-+	ip_set_ip_t ip;
-+	unsigned int timeout;
-+};
-+
-+#endif	/* __IP_SET_IPTREE_H */
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ip_set_jhash.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_jhash.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ip_set_jhash.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_jhash.h	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,148 @@
-+#ifndef _LINUX_IPSET_JHASH_H
-+#define _LINUX_IPSET_JHASH_H
-+
-+/* This is a copy of linux/jhash.h but the types u32/u8 are changed
-+ * to __u32/__u8 so that the header file can be included into
-+ * userspace code as well. Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
-+ */
-+
-+/* jhash.h: Jenkins hash support.
-+ *
-+ * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net)
-+ *
-+ * http://burtleburtle.net/bob/hash/
-+ *
-+ * These are the credits from Bob's sources:
-+ *
-+ * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
-+ * hash(), hash2(), hash3, and mix() are externally useful functions.
-+ * Routines to test the hash are included if SELF_TEST is defined.
-+ * You can use this free for any purpose.  It has no warranty.
-+ *
-+ * Copyright (C) 2003 David S. Miller (davem@redhat.com)
-+ *
-+ * I've modified Bob's hash to be useful in the Linux kernel, and
-+ * any bugs present are surely my fault.  -DaveM
-+ */
-+
-+/* NOTE: Arguments are modified. */
-+#define __jhash_mix(a, b, c) \
-+{ \
-+  a -= b; a -= c; a ^= (c>>13); \
-+  b -= c; b -= a; b ^= (a<<8); \
-+  c -= a; c -= b; c ^= (b>>13); \
-+  a -= b; a -= c; a ^= (c>>12);  \
-+  b -= c; b -= a; b ^= (a<<16); \
-+  c -= a; c -= b; c ^= (b>>5); \
-+  a -= b; a -= c; a ^= (c>>3);  \
-+  b -= c; b -= a; b ^= (a<<10); \
-+  c -= a; c -= b; c ^= (b>>15); \
-+}
-+
-+/* The golden ration: an arbitrary value */
-+#define JHASH_GOLDEN_RATIO	0x9e3779b9
-+
-+/* The most generic version, hashes an arbitrary sequence
-+ * of bytes.  No alignment or length assumptions are made about
-+ * the input key.
-+ */
-+static inline __u32 jhash(void *key, __u32 length, __u32 initval)
-+{
-+	__u32 a, b, c, len;
-+	__u8 *k = key;
-+
-+	len = length;
-+	a = b = JHASH_GOLDEN_RATIO;
-+	c = initval;
-+
-+	while (len >= 12) {
-+		a += (k[0] +((__u32)k[1]<<8) +((__u32)k[2]<<16) +((__u32)k[3]<<24));
-+		b += (k[4] +((__u32)k[5]<<8) +((__u32)k[6]<<16) +((__u32)k[7]<<24));
-+		c += (k[8] +((__u32)k[9]<<8) +((__u32)k[10]<<16)+((__u32)k[11]<<24));
-+
-+		__jhash_mix(a,b,c);
-+
-+		k += 12;
-+		len -= 12;
-+	}
-+
-+	c += length;
-+	switch (len) {
-+	case 11: c += ((__u32)k[10]<<24);
-+	case 10: c += ((__u32)k[9]<<16);
-+	case 9 : c += ((__u32)k[8]<<8);
-+	case 8 : b += ((__u32)k[7]<<24);
-+	case 7 : b += ((__u32)k[6]<<16);
-+	case 6 : b += ((__u32)k[5]<<8);
-+	case 5 : b += k[4];
-+	case 4 : a += ((__u32)k[3]<<24);
-+	case 3 : a += ((__u32)k[2]<<16);
-+	case 2 : a += ((__u32)k[1]<<8);
-+	case 1 : a += k[0];
-+	};
-+
-+	__jhash_mix(a,b,c);
-+
-+	return c;
-+}
-+
-+/* A special optimized version that handles 1 or more of __u32s.
-+ * The length parameter here is the number of __u32s in the key.
-+ */
-+static inline __u32 jhash2(__u32 *k, __u32 length, __u32 initval)
-+{
-+	__u32 a, b, c, len;
-+
-+	a = b = JHASH_GOLDEN_RATIO;
-+	c = initval;
-+	len = length;
-+
-+	while (len >= 3) {
-+		a += k[0];
-+		b += k[1];
-+		c += k[2];
-+		__jhash_mix(a, b, c);
-+		k += 3; len -= 3;
-+	}
-+
-+	c += length * 4;
-+
-+	switch (len) {
-+	case 2 : b += k[1];
-+	case 1 : a += k[0];
-+	};
-+
-+	__jhash_mix(a,b,c);
-+
-+	return c;
-+}
-+
-+
-+/* A special ultra-optimized versions that knows they are hashing exactly
-+ * 3, 2 or 1 word(s).
-+ *
-+ * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
-+ *       done at the end is not done here.
-+ */
-+static inline __u32 jhash_3words(__u32 a, __u32 b, __u32 c, __u32 initval)
-+{
-+	a += JHASH_GOLDEN_RATIO;
-+	b += JHASH_GOLDEN_RATIO;
-+	c += initval;
-+
-+	__jhash_mix(a, b, c);
-+
-+	return c;
-+}
-+
-+static inline __u32 jhash_2words(__u32 a, __u32 b, __u32 initval)
-+{
-+	return jhash_3words(a, b, 0, initval);
-+}
-+
-+static inline __u32 jhash_1word(__u32 a, __u32 initval)
-+{
-+	return jhash_3words(a, 0, 0, initval);
-+}
-+
-+#endif /* _LINUX_IPSET_JHASH_H */
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ip_set_macipmap.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_macipmap.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ip_set_macipmap.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_macipmap.h	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,38 @@
-+#ifndef __IP_SET_MACIPMAP_H
-+#define __IP_SET_MACIPMAP_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "macipmap"
-+#define MAX_RANGE 0x0000FFFF
-+
-+/* general flags */
-+#define IPSET_MACIP_MATCHUNSET	1
-+
-+/* per ip flags */
-+#define IPSET_MACIP_ISSET	1
-+
-+struct ip_set_macipmap {
-+	void *members;			/* the macipmap proper */
-+	ip_set_ip_t first_ip;		/* host byte order, included in range */
-+	ip_set_ip_t last_ip;		/* host byte order, included in range */
-+	u_int32_t flags;
-+};
-+
-+struct ip_set_req_macipmap_create {
-+	ip_set_ip_t from;
-+	ip_set_ip_t to;
-+	u_int32_t flags;
-+};
-+
-+struct ip_set_req_macipmap {
-+	ip_set_ip_t ip;
-+	unsigned char ethernet[ETH_ALEN];
-+};
-+
-+struct ip_set_macip {
-+	unsigned short flags;
-+	unsigned char ethernet[ETH_ALEN];
-+};
-+
-+#endif	/* __IP_SET_MACIPMAP_H */
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ip_set_malloc.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_malloc.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ip_set_malloc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_malloc.h	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,42 @@
-+#ifndef _IP_SET_MALLOC_H
-+#define _IP_SET_MALLOC_H
-+
-+#ifdef __KERNEL__
-+
-+/* Memory allocation and deallocation */
-+static size_t max_malloc_size = 0;
-+
-+static inline void init_max_malloc_size(void)
-+{
-+#define CACHE(x) max_malloc_size = x;
-+#include <linux/kmalloc_sizes.h>
-+#undef CACHE
-+}
-+
-+static inline void * ip_set_malloc_atomic(size_t bytes)
-+{
-+	if (bytes > max_malloc_size)
-+		return __vmalloc(bytes, GFP_ATOMIC, PAGE_KERNEL);
-+	else
-+		return kmalloc(bytes, GFP_ATOMIC);
-+}
-+
-+static inline void * ip_set_malloc(size_t bytes)
-+{
-+	if (bytes > max_malloc_size)
-+		return vmalloc(bytes);
-+	else
-+		return kmalloc(bytes, GFP_KERNEL);
-+}
-+
-+static inline void ip_set_free(void * data, size_t bytes)
-+{
-+	if (bytes > max_malloc_size)
-+		vfree(data);
-+	else
-+		kfree(data);
-+}
-+
-+#endif				/* __KERNEL__ */
-+
-+#endif /*_IP_SET_MALLOC_H*/
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ip_set_nethash.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_nethash.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ip_set_nethash.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_nethash.h	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,55 @@
-+#ifndef __IP_SET_NETHASH_H
-+#define __IP_SET_NETHASH_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "nethash"
-+#define MAX_RANGE 0x0000FFFF
-+
-+struct ip_set_nethash {
-+	ip_set_ip_t *members;		/* the nethash proper */
-+	uint32_t initval;		/* initval for jhash_1word */
-+	uint32_t prime;			/* prime for double hashing */
-+	uint32_t hashsize;		/* hash size */
-+	uint16_t probes;		/* max number of probes  */
-+	uint16_t resize;		/* resize factor in percent */
-+	unsigned char cidr[30];		/* CIDR sizes */
-+};
-+
-+struct ip_set_req_nethash_create {
-+	uint32_t hashsize;
-+	uint16_t probes;
-+	uint16_t resize;
-+};
-+
-+struct ip_set_req_nethash {
-+	ip_set_ip_t ip;
-+	unsigned char cidr;
-+};
-+
-+static unsigned char shifts[] = {255, 253, 249, 241, 225, 193, 129, 1};
-+
-+static inline ip_set_ip_t 
-+pack(ip_set_ip_t ip, unsigned char cidr)
-+{
-+	ip_set_ip_t addr, *paddr = &addr;
-+	unsigned char n, t, *a;
-+
-+	addr = htonl(ip & (0xFFFFFFFF << (32 - (cidr))));
-+#ifdef __KERNEL__
-+	DP("ip:%u.%u.%u.%u/%u", NIPQUAD(addr), cidr);
-+#endif
-+	n = cidr / 8;
-+	t = cidr % 8;	
-+	a = &((unsigned char *)paddr)[n];
-+	*a = *a /(1 << (8 - t)) + shifts[t];
-+#ifdef __KERNEL__
-+	DP("n: %u, t: %u, a: %u", n, t, *a);
-+	DP("ip:%u.%u.%u.%u/%u, %u.%u.%u.%u",
-+	   HIPQUAD(ip), cidr, NIPQUAD(addr));
-+#endif
-+
-+	return ntohl(addr);
-+}
-+
-+#endif	/* __IP_SET_NETHASH_H */
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ip_set_portmap.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_portmap.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ip_set_portmap.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_portmap.h	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,25 @@
-+#ifndef __IP_SET_PORTMAP_H
-+#define __IP_SET_PORTMAP_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME	"portmap"
-+#define MAX_RANGE	0x0000FFFF
-+#define INVALID_PORT	(MAX_RANGE + 1)
-+
-+struct ip_set_portmap {
-+	void *members;			/* the portmap proper */
-+	ip_set_ip_t first_port;		/* host byte order, included in range */
-+	ip_set_ip_t last_port;		/* host byte order, included in range */
-+};
-+
-+struct ip_set_req_portmap_create {
-+	ip_set_ip_t from;
-+	ip_set_ip_t to;
-+};
-+
-+struct ip_set_req_portmap {
-+	ip_set_ip_t port;
-+};
-+
-+#endif /* __IP_SET_PORTMAP_H */
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ip_set_prime.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_prime.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ip_set_prime.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ip_set_prime.h	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,34 @@
-+#ifndef __IP_SET_PRIME_H
-+#define __IP_SET_PRIME_H
-+
-+static inline unsigned make_prime_bound(unsigned nr)
-+{
-+	unsigned long long nr64 = nr;
-+	unsigned long long x = 1;
-+	nr = 1;
-+	while (x <= nr64) { x <<= 2; nr <<= 1; }
-+	return nr;
-+}
-+
-+static inline int make_prime_check(unsigned nr)
-+{
-+	unsigned x = 3;
-+	unsigned b = make_prime_bound(nr);
-+	while (x <= b) {
-+		if (0 == (nr % x)) return 0;
-+		x += 2;
-+	}
-+	return 1;
-+}
-+
-+static unsigned make_prime(unsigned nr)
-+{
-+	if (0 == (nr & 1)) nr--;
-+	while (nr > 1) {
-+		if (make_prime_check(nr)) return nr;
-+		nr -= 2;
-+	}
-+	return 2;
-+}
-+
-+#endif /* __IP_SET_PRIME_H */
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ipt_set.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ipt_set.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ipt_set.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ipt_set.h	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,21 @@
-+#ifndef _IPT_SET_H
-+#define _IPT_SET_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+struct ipt_set_info {
-+	ip_set_id_t index;
-+	u_int32_t flags[IP_SET_MAX_BINDINGS + 1];
-+};
-+
-+/* match info */
-+struct ipt_set_info_match {
-+	struct ipt_set_info match_set;
-+};
-+
-+struct ipt_set_info_target {
-+	struct ipt_set_info add_set;
-+	struct ipt_set_info del_set;
-+};
-+
-+#endif /*_IPT_SET_H*/
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ip_set.c linux-2.6.16-owrt/net/ipv4/netfilter/ip_set.c
---- linux-2.6.16/net/ipv4/netfilter/ip_set.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ip_set.c	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,1989 @@
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ *                         Patrick Schaaf <bof@bof.de>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module for IP set management */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/kmod.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/random.h>
-+#include <linux/jhash.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <asm/semaphore.h>
-+#include <linux/spinlock.h>
-+#include <linux/vmalloc.h>
-+
-+#define ASSERT_READ_LOCK(x)	/* dont use that */
-+#define ASSERT_WRITE_LOCK(x)
-+#include <linux/netfilter_ipv4/listhelp.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+static struct list_head set_type_list;		/* all registered sets */
-+static struct ip_set **ip_set_list;		/* all individual sets */
-+static DEFINE_RWLOCK(ip_set_lock);		/* protects the lists and the hash */
-+static DECLARE_MUTEX(ip_set_app_mutex);		/* serializes user access */
-+static ip_set_id_t ip_set_max = CONFIG_IP_NF_SET_MAX;
-+static ip_set_id_t ip_set_bindings_hash_size =  CONFIG_IP_NF_SET_HASHSIZE;
-+static struct list_head *ip_set_hash;		/* hash of bindings */
-+static unsigned int ip_set_hash_random;		/* random seed */
-+
-+/*
-+ * Sets are identified either by the index in ip_set_list or by id.
-+ * The id never changes and is used to find a key in the hash. 
-+ * The index may change by swapping and used at all other places 
-+ * (set/SET netfilter modules, binding value, etc.)
-+ *
-+ * Userspace requests are serialized by ip_set_mutex and sets can
-+ * be deleted only from userspace. Therefore ip_set_list locking 
-+ * must obey the following rules:
-+ *
-+ * - kernel requests: read and write locking mandatory
-+ * - user requests: read locking optional, write locking mandatory
-+ */
-+
-+static inline void
-+__ip_set_get(ip_set_id_t index)
-+{
-+	atomic_inc(&ip_set_list[index]->ref);
-+}
-+
-+static inline void
-+__ip_set_put(ip_set_id_t index)
-+{
-+	atomic_dec(&ip_set_list[index]->ref);
-+}
-+
-+/*
-+ * Binding routines
-+ */
-+
-+static inline int
-+ip_hash_cmp(const struct ip_set_hash *set_hash,
-+	    ip_set_id_t id, ip_set_ip_t ip)
-+{
-+	return set_hash->id == id && set_hash->ip == ip;
-+}
-+
-+static ip_set_id_t
-+ip_set_find_in_hash(ip_set_id_t id, ip_set_ip_t ip)
-+{
-+	u_int32_t key = jhash_2words(id, ip, ip_set_hash_random) 
-+				% ip_set_bindings_hash_size;
-+	struct ip_set_hash *set_hash;
-+
-+	ASSERT_READ_LOCK(&ip_set_lock);
-+	IP_SET_ASSERT(ip_set_list[id]);
-+	DP("set: %s, ip: %u.%u.%u.%u", ip_set_list[id]->name, HIPQUAD(ip));	
-+	
-+	set_hash = LIST_FIND(&ip_set_hash[key], ip_hash_cmp,
-+			     struct ip_set_hash *, id, ip);
-+	
-+	DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name, 
-+	   HIPQUAD(ip),
-+	   set_hash != NULL ? ip_set_list[set_hash->binding]->name : "");
-+
-+	return (set_hash != NULL ? set_hash->binding : IP_SET_INVALID_ID);
-+}
-+
-+static inline void 
-+__set_hash_del(struct ip_set_hash *set_hash)
-+{
-+	ASSERT_WRITE_LOCK(&ip_set_lock);
-+	IP_SET_ASSERT(ip_set_list[set_hash->binding]);	
-+
-+	__ip_set_put(set_hash->binding);
-+	list_del(&set_hash->list);
-+	kfree(set_hash);
-+}
-+
-+static int
-+ip_set_hash_del(ip_set_id_t id, ip_set_ip_t ip)
-+{
-+	u_int32_t key = jhash_2words(id, ip, ip_set_hash_random)
-+				% ip_set_bindings_hash_size;
-+	struct ip_set_hash *set_hash;
-+	
-+	IP_SET_ASSERT(ip_set_list[id]);
-+	DP("set: %s, ip: %u.%u.%u.%u", ip_set_list[id]->name, HIPQUAD(ip));	
-+	write_lock_bh(&ip_set_lock);
-+	set_hash = LIST_FIND(&ip_set_hash[key], ip_hash_cmp,
-+			     struct ip_set_hash *, id, ip);
-+	DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name,
-+	   HIPQUAD(ip),
-+	   set_hash != NULL ? ip_set_list[set_hash->binding]->name : "");
-+
-+	if (set_hash != NULL)
-+		__set_hash_del(set_hash);
-+	write_unlock_bh(&ip_set_lock);
-+	return 0;
-+}
-+
-+static int 
-+ip_set_hash_add(ip_set_id_t id, ip_set_ip_t ip, ip_set_id_t binding)
-+{
-+	u_int32_t key = jhash_2words(id, ip, ip_set_hash_random)
-+				% ip_set_bindings_hash_size;
-+	struct ip_set_hash *set_hash;
-+	int ret = 0;
-+	
-+	IP_SET_ASSERT(ip_set_list[id]);
-+	IP_SET_ASSERT(ip_set_list[binding]);
-+	DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name, 
-+	   HIPQUAD(ip), ip_set_list[binding]->name);
-+	write_lock_bh(&ip_set_lock);
-+	set_hash = LIST_FIND(&ip_set_hash[key], ip_hash_cmp,
-+			     struct ip_set_hash *, id, ip);
-+	if (!set_hash) {
-+		set_hash = kmalloc(sizeof(struct ip_set_hash), GFP_KERNEL);
-+		if (!set_hash) {
-+			ret = -ENOMEM;
-+			goto unlock;
-+		}
-+		INIT_LIST_HEAD(&set_hash->list);
-+		set_hash->id = id;
-+		set_hash->ip = ip;
-+		list_add(&ip_set_hash[key], &set_hash->list);
-+	} else {
-+		IP_SET_ASSERT(ip_set_list[set_hash->binding]);	
-+		DP("overwrite binding: %s",
-+		   ip_set_list[set_hash->binding]->name);
-+		__ip_set_put(set_hash->binding);
-+	}
-+	set_hash->binding = binding;
-+	__ip_set_get(set_hash->binding);
-+    unlock:
-+	write_unlock_bh(&ip_set_lock);
-+	return ret;
-+}
-+
-+#define FOREACH_HASH_DO(fn, args...) 						\
-+({										\
-+	ip_set_id_t __key;							\
-+	struct ip_set_hash *__set_hash;						\
-+										\
-+	for (__key = 0; __key < ip_set_bindings_hash_size; __key++) {		\
-+		list_for_each_entry(__set_hash, &ip_set_hash[__key], list)	\
-+			fn(__set_hash , ## args);				\
-+	}									\
-+})
-+
-+#define FOREACH_HASH_RW_DO(fn, args...) 						\
-+({										\
-+	ip_set_id_t __key;							\
-+	struct ip_set_hash *__set_hash, *__n;					\
-+										\
-+	ASSERT_WRITE_LOCK(&ip_set_lock);					\
-+	for (__key = 0; __key < ip_set_bindings_hash_size; __key++) {		\
-+		list_for_each_entry_safe(__set_hash, __n, &ip_set_hash[__key], list)\
-+			fn(__set_hash , ## args);				\
-+	}									\
-+})
-+
-+/* Add, del and test set entries from kernel */
-+
-+#define follow_bindings(index, set, ip)					\
-+((index = ip_set_find_in_hash((set)->id, ip)) != IP_SET_INVALID_ID	\
-+ || (index = (set)->binding) != IP_SET_INVALID_ID)
-+
-+int
-+ip_set_testip_kernel(ip_set_id_t index,
-+		     const struct sk_buff *skb,
-+		     const u_int32_t *flags)
-+{
-+	struct ip_set *set;
-+	ip_set_ip_t ip;
-+	int res, i = 0;
-+	
-+	IP_SET_ASSERT(flags[i]);
-+	read_lock_bh(&ip_set_lock);
-+	do {
-+		set = ip_set_list[index];
-+		IP_SET_ASSERT(set);
-+		DP("set %s, index %u", set->name, index);
-+		read_lock_bh(&set->lock);
-+		res = set->type->testip_kernel(set, skb, flags[i], &ip);
-+		read_unlock_bh(&set->lock);
-+	} while (res > 0 
-+		 && flags[++i] 
-+		 && follow_bindings(index, set, ip));
-+	read_unlock_bh(&ip_set_lock);
-+
-+	return res;
-+}
-+
-+void
-+ip_set_addip_kernel(ip_set_id_t index,
-+		    const struct sk_buff *skb,
-+		    const u_int32_t *flags)
-+{
-+	struct ip_set *set;
-+	ip_set_ip_t ip;
-+	int res, i= 0;
-+
-+	IP_SET_ASSERT(flags[i]);
-+   retry:
-+	read_lock_bh(&ip_set_lock);
-+	do {
-+		set = ip_set_list[index];
-+		IP_SET_ASSERT(set);
-+		DP("set %s, index %u", set->name, index);
-+		write_lock_bh(&set->lock);
-+		res = set->type->addip_kernel(set, skb, flags[i], &ip);
-+		write_unlock_bh(&set->lock);
-+	} while ((res == 0 || res == -EEXIST)
-+		 && flags[++i] 
-+		 && follow_bindings(index, set, ip));
-+	read_unlock_bh(&ip_set_lock);
-+
-+	if (res == -EAGAIN
-+	    && set->type->retry
-+	    && (res = set->type->retry(set)) == 0)
-+	    	goto retry;
-+}
-+
-+void
-+ip_set_delip_kernel(ip_set_id_t index,
-+		    const struct sk_buff *skb,
-+		    const u_int32_t *flags)
-+{
-+	struct ip_set *set;
-+	ip_set_ip_t ip;
-+	int res, i = 0;
-+
-+	IP_SET_ASSERT(flags[i]);
-+	read_lock_bh(&ip_set_lock);
-+	do {
-+		set = ip_set_list[index];
-+		IP_SET_ASSERT(set);
-+		DP("set %s, index %u", set->name, index);
-+		write_lock_bh(&set->lock);
-+		res = set->type->delip_kernel(set, skb, flags[i], &ip);
-+		write_unlock_bh(&set->lock);
-+	} while ((res == 0 || res == -EEXIST)
-+		 && flags[++i] 
-+		 && follow_bindings(index, set, ip));
-+	read_unlock_bh(&ip_set_lock);
-+}
-+
-+/* Register and deregister settype */
-+
-+static inline int
-+set_type_equal(const struct ip_set_type *set_type, const char *str2)
-+{
-+	return !strncmp(set_type->typename, str2, IP_SET_MAXNAMELEN - 1);
-+}
-+
-+static inline struct ip_set_type *
-+find_set_type(const char *name)
-+{
-+	return LIST_FIND(&set_type_list,
-+			 set_type_equal,
-+			 struct ip_set_type *,
-+			 name);
-+}
-+
-+int 
-+ip_set_register_set_type(struct ip_set_type *set_type)
-+{
-+	int ret = 0;
-+	
-+	if (set_type->protocol_version != IP_SET_PROTOCOL_VERSION) {
-+		ip_set_printk("'%s' uses wrong protocol version %u (want %u)",
-+			      set_type->typename,
-+			      set_type->protocol_version,
-+			      IP_SET_PROTOCOL_VERSION);
-+		return -EINVAL;
-+	}
-+
-+	write_lock_bh(&ip_set_lock);
-+	if (find_set_type(set_type->typename)) {
-+		/* Duplicate! */
-+		ip_set_printk("'%s' already registered!", 
-+			      set_type->typename);
-+		ret = -EINVAL;
-+		goto unlock;
-+	}
-+	if (!try_module_get(THIS_MODULE)) {
-+		ret = -EFAULT;
-+		goto unlock;
-+	}
-+	list_append(&set_type_list, set_type);
-+	DP("'%s' registered.", set_type->typename);
-+   unlock:
-+	write_unlock_bh(&ip_set_lock);
-+	return ret;
-+}
-+
-+void
-+ip_set_unregister_set_type(struct ip_set_type *set_type)
-+{
-+	write_lock_bh(&ip_set_lock);
-+	if (!find_set_type(set_type->typename)) {
-+		ip_set_printk("'%s' not registered?",
-+			      set_type->typename);
-+		goto unlock;
-+	}
-+	LIST_DELETE(&set_type_list, set_type);
-+	module_put(THIS_MODULE);
-+	DP("'%s' unregistered.", set_type->typename);
-+   unlock:
-+	write_unlock_bh(&ip_set_lock);
-+
-+}
-+
-+/*
-+ * Userspace routines
-+ */
-+
-+/*
-+ * Find set by name, reference it once. The reference makes sure the
-+ * thing pointed to, does not go away under our feet. Drop the reference
-+ * later, using ip_set_put().
-+ */
-+ip_set_id_t
-+ip_set_get_byname(const char *name)
-+{
-+	ip_set_id_t i, index = IP_SET_INVALID_ID;
-+	
-+	down(&ip_set_app_mutex);
-+	for (i = 0; i < ip_set_max; i++) {
-+		if (ip_set_list[i] != NULL
-+		    && strcmp(ip_set_list[i]->name, name) == 0) {
-+			__ip_set_get(i);
-+			index = i;
-+			break;
-+		}
-+	}
-+	up(&ip_set_app_mutex);
-+	return index;
-+}
-+
-+/*
-+ * Find set by index, reference it once. The reference makes sure the
-+ * thing pointed to, does not go away under our feet. Drop the reference
-+ * later, using ip_set_put().
-+ */
-+ip_set_id_t
-+ip_set_get_byindex(ip_set_id_t index)
-+{
-+	down(&ip_set_app_mutex);
-+
-+	if (index >= ip_set_max)
-+		return IP_SET_INVALID_ID;
-+	
-+	if (ip_set_list[index])
-+		__ip_set_get(index);
-+	else
-+		index = IP_SET_INVALID_ID;
-+		
-+	up(&ip_set_app_mutex);
-+	return index;
-+}
-+
-+/*
-+ * If the given set pointer points to a valid set, decrement
-+ * reference count by 1. The caller shall not assume the index
-+ * to be valid, after calling this function.
-+ */
-+void ip_set_put(ip_set_id_t index)
-+{
-+	down(&ip_set_app_mutex);
-+	if (ip_set_list[index])
-+		__ip_set_put(index);
-+	up(&ip_set_app_mutex);
-+}
-+
-+/* Find a set by name or index */
-+static ip_set_id_t
-+ip_set_find_byname(const char *name)
-+{
-+	ip_set_id_t i, index = IP_SET_INVALID_ID;
-+	
-+	for (i = 0; i < ip_set_max; i++) {
-+		if (ip_set_list[i] != NULL
-+		    && strcmp(ip_set_list[i]->name, name) == 0) {
-+			index = i;
-+			break;
-+		}
-+	}
-+	return index;
-+}
-+
-+static ip_set_id_t
-+ip_set_find_byindex(ip_set_id_t index)
-+{
-+	if (index >= ip_set_max || ip_set_list[index] == NULL)
-+		index = IP_SET_INVALID_ID;
-+	
-+	return index;
-+}
-+
-+/*
-+ * Add, del, test, bind and unbind
-+ */
-+
-+static inline int
-+__ip_set_testip(struct ip_set *set,
-+	        const void *data,
-+	        size_t size,
-+	        ip_set_ip_t *ip)
-+{
-+	int res;
-+
-+	read_lock_bh(&set->lock);
-+	res = set->type->testip(set, data, size, ip);
-+	read_unlock_bh(&set->lock);
-+
-+	return res;
-+}
-+
-+static int
-+__ip_set_addip(ip_set_id_t index,
-+	       const void *data,
-+	       size_t size)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	ip_set_ip_t ip;
-+	int res;
-+	
-+	IP_SET_ASSERT(set);
-+	do {
-+		write_lock_bh(&set->lock);
-+		res = set->type->addip(set, data, size, &ip);
-+		write_unlock_bh(&set->lock);
-+	} while (res == -EAGAIN
-+		 && set->type->retry
-+		 && (res = set->type->retry(set)) == 0);
-+
-+	return res;
-+}
-+
-+static int
-+ip_set_addip(ip_set_id_t index,
-+	     const void *data,
-+	     size_t size)
-+{
-+
-+	return __ip_set_addip(index,
-+			      data + sizeof(struct ip_set_req_adt),
-+			      size - sizeof(struct ip_set_req_adt));
-+}
-+
-+static int
-+ip_set_delip(ip_set_id_t index,
-+	     const void *data,
-+	     size_t size)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	ip_set_ip_t ip;
-+	int res;
-+	
-+	IP_SET_ASSERT(set);
-+	write_lock_bh(&set->lock);
-+	res = set->type->delip(set,
-+			       data + sizeof(struct ip_set_req_adt),
-+			       size - sizeof(struct ip_set_req_adt),
-+			       &ip);
-+	write_unlock_bh(&set->lock);
-+
-+	return res;
-+}
-+
-+static int
-+ip_set_testip(ip_set_id_t index,
-+	      const void *data,
-+	      size_t size)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	ip_set_ip_t ip;
-+	int res;
-+
-+	IP_SET_ASSERT(set);
-+	res = __ip_set_testip(set,
-+			      data + sizeof(struct ip_set_req_adt),
-+			      size - sizeof(struct ip_set_req_adt),
-+			      &ip);
-+
-+	return (res > 0 ? -EEXIST : res);
-+}
-+
-+static int
-+ip_set_bindip(ip_set_id_t index,
-+	      const void *data,
-+	      size_t size)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	struct ip_set_req_bind *req_bind;
-+	ip_set_id_t binding;
-+	ip_set_ip_t ip;
-+	int res;
-+
-+	IP_SET_ASSERT(set);
-+	if (size < sizeof(struct ip_set_req_bind))
-+		return -EINVAL;
-+		
-+	req_bind = (struct ip_set_req_bind *) data;
-+	req_bind->binding[IP_SET_MAXNAMELEN - 1] = '\0';
-+
-+	if (strcmp(req_bind->binding, IPSET_TOKEN_DEFAULT) == 0) {
-+		/* Default binding of a set */
-+		char *binding_name;
-+		
-+		if (size != sizeof(struct ip_set_req_bind) + IP_SET_MAXNAMELEN)
-+			return -EINVAL;
-+
-+		binding_name = (char *)(data + sizeof(struct ip_set_req_bind));	
-+		binding_name[IP_SET_MAXNAMELEN - 1] = '\0';
-+
-+		binding = ip_set_find_byname(binding_name);
-+		if (binding == IP_SET_INVALID_ID)
-+			return -ENOENT;
-+
-+		write_lock_bh(&ip_set_lock);
-+		/* Sets as binding values are referenced */
-+		if (set->binding != IP_SET_INVALID_ID)
-+			__ip_set_put(set->binding);
-+		set->binding = binding;
-+		__ip_set_get(set->binding);
-+		write_unlock_bh(&ip_set_lock);
-+
-+		return 0;
-+	}
-+	binding = ip_set_find_byname(req_bind->binding);
-+	if (binding == IP_SET_INVALID_ID)
-+		return -ENOENT;
-+
-+	res = __ip_set_testip(set,
-+			      data + sizeof(struct ip_set_req_bind),
-+			      size - sizeof(struct ip_set_req_bind),
-+			      &ip);
-+	DP("set %s, ip: %u.%u.%u.%u, binding %s",
-+	   set->name, HIPQUAD(ip), ip_set_list[binding]->name);
-+	
-+	if (res >= 0)
-+		res = ip_set_hash_add(set->id, ip, binding);
-+
-+	return res;
-+}
-+
-+#define FOREACH_SET_DO(fn, args...) 				\
-+({								\
-+	ip_set_id_t __i;					\
-+	struct ip_set *__set;					\
-+								\
-+	for (__i = 0; __i < ip_set_max; __i++) {		\
-+		__set = ip_set_list[__i];			\
-+		if (__set != NULL)				\
-+			fn(__set , ##args);			\
-+	}							\
-+})
-+
-+static inline void
-+__set_hash_del_byid(struct ip_set_hash *set_hash, ip_set_id_t id)
-+{
-+	if (set_hash->id == id)
-+		__set_hash_del(set_hash);
-+}
-+
-+static inline void
-+__unbind_default(struct ip_set *set)
-+{
-+	if (set->binding != IP_SET_INVALID_ID) {
-+		/* Sets as binding values are referenced */
-+		__ip_set_put(set->binding);
-+		set->binding = IP_SET_INVALID_ID;
-+	}
-+}
-+
-+static int
-+ip_set_unbindip(ip_set_id_t index,
-+	        const void *data,
-+	        size_t size)
-+{
-+	struct ip_set *set;
-+	struct ip_set_req_bind *req_bind;
-+	ip_set_ip_t ip;
-+	int res;
-+
-+	DP("");
-+	if (size < sizeof(struct ip_set_req_bind))
-+		return -EINVAL;
-+		
-+	req_bind = (struct ip_set_req_bind *) data;
-+	req_bind->binding[IP_SET_MAXNAMELEN - 1] = '\0';
-+	
-+	DP("%u %s", index, req_bind->binding);
-+	if (index == IP_SET_INVALID_ID) {
-+		/* unbind :all: */
-+		if (strcmp(req_bind->binding, IPSET_TOKEN_DEFAULT) == 0) {
-+			/* Default binding of sets */
-+			write_lock_bh(&ip_set_lock);
-+			FOREACH_SET_DO(__unbind_default);
-+			write_unlock_bh(&ip_set_lock);
-+			return 0;
-+		} else if (strcmp(req_bind->binding, IPSET_TOKEN_ALL) == 0) {
-+			/* Flush all bindings of all sets*/
-+			write_lock_bh(&ip_set_lock);
-+			FOREACH_HASH_RW_DO(__set_hash_del);
-+			write_unlock_bh(&ip_set_lock);
-+			return 0;
-+		}
-+		DP("unreachable reached!");
-+		return -EINVAL;
-+	}
-+	
-+	set = ip_set_list[index];
-+	IP_SET_ASSERT(set);
-+	if (strcmp(req_bind->binding, IPSET_TOKEN_DEFAULT) == 0) {
-+		/* Default binding of set */
-+		ip_set_id_t binding = ip_set_find_byindex(set->binding);
-+
-+		if (binding == IP_SET_INVALID_ID)
-+			return -ENOENT;
-+			
-+		write_lock_bh(&ip_set_lock);
-+		/* Sets in hash values are referenced */
-+		__ip_set_put(set->binding);
-+		set->binding = IP_SET_INVALID_ID;
-+		write_unlock_bh(&ip_set_lock);
-+
-+		return 0;
-+	} else if (strcmp(req_bind->binding, IPSET_TOKEN_ALL) == 0) {
-+		/* Flush all bindings */
-+
-+		write_lock_bh(&ip_set_lock);
-+		FOREACH_HASH_RW_DO(__set_hash_del_byid, set->id);
-+		write_unlock_bh(&ip_set_lock);
-+		return 0;
-+	}
-+	
-+	res = __ip_set_testip(set,
-+			      data + sizeof(struct ip_set_req_bind),
-+			      size - sizeof(struct ip_set_req_bind),
-+			      &ip);
-+
-+	DP("set %s, ip: %u.%u.%u.%u", set->name, HIPQUAD(ip));
-+	if (res >= 0)
-+		res = ip_set_hash_del(set->id, ip);
-+
-+	return res;
-+}
-+
-+static int
-+ip_set_testbind(ip_set_id_t index,
-+	        const void *data,
-+	        size_t size)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	struct ip_set_req_bind *req_bind;
-+	ip_set_id_t binding;
-+	ip_set_ip_t ip;
-+	int res;
-+
-+	IP_SET_ASSERT(set);
-+	if (size < sizeof(struct ip_set_req_bind))
-+		return -EINVAL;
-+		
-+	req_bind = (struct ip_set_req_bind *) data;
-+	req_bind->binding[IP_SET_MAXNAMELEN - 1] = '\0';
-+
-+	if (strcmp(req_bind->binding, IPSET_TOKEN_DEFAULT) == 0) {
-+		/* Default binding of set */
-+		char *binding_name;
-+		
-+		if (size != sizeof(struct ip_set_req_bind) + IP_SET_MAXNAMELEN)
-+			return -EINVAL;
-+
-+		binding_name = (char *)(data + sizeof(struct ip_set_req_bind));	
-+		binding_name[IP_SET_MAXNAMELEN - 1] = '\0';
-+
-+		binding = ip_set_find_byname(binding_name);
-+		if (binding == IP_SET_INVALID_ID)
-+			return -ENOENT;
-+		
-+		res = (set->binding == binding) ? -EEXIST : 0;
-+
-+		return res;
-+	}
-+	binding = ip_set_find_byname(req_bind->binding);
-+	if (binding == IP_SET_INVALID_ID)
-+		return -ENOENT;
-+		
-+	
-+	res = __ip_set_testip(set,
-+			      data + sizeof(struct ip_set_req_bind),
-+			      size - sizeof(struct ip_set_req_bind),
-+			      &ip);
-+	DP("set %s, ip: %u.%u.%u.%u, binding %s",
-+	   set->name, HIPQUAD(ip), ip_set_list[binding]->name);
-+	   
-+	if (res >= 0)
-+		res = (ip_set_find_in_hash(set->id, ip) == binding)
-+			? -EEXIST : 0;
-+
-+	return res;
-+}
-+
-+static struct ip_set_type *
-+find_set_type_rlock(const char *typename)
-+{
-+	struct ip_set_type *type;
-+	
-+	read_lock_bh(&ip_set_lock);
-+	type = find_set_type(typename);
-+	if (type == NULL)
-+		read_unlock_bh(&ip_set_lock);
-+
-+	return type;
-+}
-+
-+static int
-+find_free_id(const char *name,
-+	     ip_set_id_t *index,
-+	     ip_set_id_t *id)
-+{
-+	ip_set_id_t i;
-+
-+	*id = IP_SET_INVALID_ID;
-+	for (i = 0;  i < ip_set_max; i++) {
-+		if (ip_set_list[i] == NULL) {
-+			if (*id == IP_SET_INVALID_ID)
-+				*id = *index = i;
-+		} else if (strcmp(name, ip_set_list[i]->name) == 0)
-+			/* Name clash */
-+			return -EEXIST;
-+	}
-+	if (*id == IP_SET_INVALID_ID)
-+		/* No free slot remained */
-+		return -ERANGE;
-+	/* Check that index is usable as id (swapping) */
-+    check:	
-+	for (i = 0;  i < ip_set_max; i++) {
-+		if (ip_set_list[i] != NULL
-+		    && ip_set_list[i]->id == *id) {
-+		    *id = i;
-+		    goto check;
-+		}
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * Create a set
-+ */
-+static int
-+ip_set_create(const char *name,
-+	      const char *typename,
-+	      ip_set_id_t restore,
-+	      const void *data,
-+	      size_t size)
-+{
-+	struct ip_set *set;
-+	ip_set_id_t index, id;
-+	int res = 0;
-+
-+	DP("setname: %s, typename: %s, id: %u", name, typename, restore);
-+	/*
-+	 * First, and without any locks, allocate and initialize
-+	 * a normal base set structure.
-+	 */
-+	set = kmalloc(sizeof(struct ip_set), GFP_KERNEL);
-+	if (!set)
-+		return -ENOMEM;
-+	set->lock = RW_LOCK_UNLOCKED;
-+	strncpy(set->name, name, IP_SET_MAXNAMELEN);
-+	set->binding = IP_SET_INVALID_ID;
-+	atomic_set(&set->ref, 0);
-+
-+	/*
-+	 * Next, take the &ip_set_lock, check that we know the type,
-+	 * and take a reference on the type, to make sure it
-+	 * stays available while constructing our new set.
-+	 *
-+	 * After referencing the type, we drop the &ip_set_lock,
-+	 * and let the new set construction run without locks.
-+	 */
-+	set->type = find_set_type_rlock(typename);
-+	if (set->type == NULL) {
-+		/* Try loading the module */
-+		char modulename[IP_SET_MAXNAMELEN + strlen("ip_set_") + 1];
-+		strcpy(modulename, "ip_set_");
-+		strcat(modulename, typename);
-+		DP("try to load %s", modulename);
-+		request_module(modulename);
-+		set->type = find_set_type_rlock(typename);
-+	}
-+	if (set->type == NULL) {
-+		ip_set_printk("no set type '%s', set '%s' not created",
-+			      typename, name);
-+		res = -ENOENT;
-+		goto out;
-+	}
-+	if (!try_module_get(set->type->me)) {
-+		read_unlock_bh(&ip_set_lock);
-+		res = -EFAULT;
-+		goto out;
-+	}
-+	read_unlock_bh(&ip_set_lock);
-+
-+	/*
-+	 * Without holding any locks, create private part.
-+	 */
-+	res = set->type->create(set, data, size);
-+	if (res != 0)
-+		goto put_out;
-+
-+	/* BTW, res==0 here. */
-+
-+	/*
-+	 * Here, we have a valid, constructed set. &ip_set_lock again,
-+	 * find free id/index and check that it is not already in 
-+	 * ip_set_list.
-+	 */
-+	write_lock_bh(&ip_set_lock);
-+	if ((res = find_free_id(set->name, &index, &id)) != 0) {
-+		DP("no free id!");
-+		goto cleanup;
-+	}
-+
-+	/* Make sure restore gets the same index */
-+	if (restore != IP_SET_INVALID_ID && index != restore) {
-+		DP("Can't restore, sets are screwed up");
-+		res = -ERANGE;
-+		goto cleanup;
-+	}
-+	 
-+	/*
-+	 * Finally! Add our shiny new set to the list, and be done.
-+	 */
-+	DP("create: '%s' created with index %u, id %u!", set->name, index, id);
-+	set->id = id;
-+	ip_set_list[index] = set;
-+	write_unlock_bh(&ip_set_lock);
-+	return res;
-+	
-+    cleanup:
-+	write_unlock_bh(&ip_set_lock);
-+	set->type->destroy(set);
-+    put_out:
-+	module_put(set->type->me);
-+    out:
-+	kfree(set);
-+	return res;
-+}
-+
-+/*
-+ * Destroy a given existing set
-+ */
-+static void
-+ip_set_destroy_set(ip_set_id_t index)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+
-+	IP_SET_ASSERT(set);
-+	DP("set: %s",  set->name);
-+	write_lock_bh(&ip_set_lock);
-+	FOREACH_HASH_RW_DO(__set_hash_del_byid, set->id);
-+	if (set->binding != IP_SET_INVALID_ID)
-+		__ip_set_put(set->binding);
-+	ip_set_list[index] = NULL;
-+	write_unlock_bh(&ip_set_lock);
-+
-+	/* Must call it without holding any lock */
-+	set->type->destroy(set);
-+	module_put(set->type->me);
-+	kfree(set);
-+}
-+
-+/*
-+ * Destroy a set - or all sets
-+ * Sets must not be referenced/used.
-+ */
-+static int
-+ip_set_destroy(ip_set_id_t index)
-+{
-+	ip_set_id_t i;
-+
-+	/* ref modification always protected by the mutex */
-+	if (index != IP_SET_INVALID_ID) {
-+		if (atomic_read(&ip_set_list[index]->ref))
-+			return -EBUSY;
-+		ip_set_destroy_set(index);
-+	} else {
-+		for (i = 0; i < ip_set_max; i++) {
-+			if (ip_set_list[i] != NULL 
-+			    && (atomic_read(&ip_set_list[i]->ref)))
-+			    	return -EBUSY;
-+		}
-+
-+		for (i = 0; i < ip_set_max; i++) {
-+			if (ip_set_list[i] != NULL)
-+				ip_set_destroy_set(i);
-+		}
-+	}
-+	return 0;
-+}
-+
-+static void
-+ip_set_flush_set(struct ip_set *set)
-+{
-+	DP("set: %s %u",  set->name, set->id);
-+
-+	write_lock_bh(&set->lock);
-+	set->type->flush(set);
-+	write_unlock_bh(&set->lock);
-+}
-+
-+/* 
-+ * Flush data in a set - or in all sets
-+ */
-+static int
-+ip_set_flush(ip_set_id_t index)
-+{
-+	if (index != IP_SET_INVALID_ID) {
-+		IP_SET_ASSERT(ip_set_list[index]);
-+		ip_set_flush_set(ip_set_list[index]);
-+	} else
-+		FOREACH_SET_DO(ip_set_flush_set);
-+
-+	return 0;
-+}
-+
-+/* Rename a set */
-+static int
-+ip_set_rename(ip_set_id_t index, const char *name)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	ip_set_id_t i;
-+	int res = 0;
-+
-+	DP("set: %s to %s",  set->name, name);
-+	write_lock_bh(&ip_set_lock);
-+	for (i = 0; i < ip_set_max; i++) {
-+		if (ip_set_list[i] != NULL
-+		    && strncmp(ip_set_list[i]->name, 
-+			       name,
-+			       IP_SET_MAXNAMELEN - 1) == 0) {
-+			res = -EEXIST;
-+			goto unlock;
-+		}
-+	}
-+	strncpy(set->name, name, IP_SET_MAXNAMELEN);
-+    unlock:
-+	write_unlock_bh(&ip_set_lock);
-+	return res;
-+}
-+
-+/*
-+ * Swap two sets so that name/index points to the other.
-+ * References are also swapped.
-+ */
-+static int
-+ip_set_swap(ip_set_id_t from_index, ip_set_id_t to_index)
-+{
-+	struct ip_set *from = ip_set_list[from_index];
-+	struct ip_set *to = ip_set_list[to_index];
-+	char from_name[IP_SET_MAXNAMELEN];
-+	u_int32_t from_ref;
-+
-+	DP("set: %s to %s",  from->name, to->name);
-+	/* Type can't be changed. Artifical restriction. */
-+	if (from->type->typecode != to->type->typecode)
-+		return -ENOEXEC;
-+
-+	/* No magic here: ref munging protected by the mutex */	
-+	write_lock_bh(&ip_set_lock);
-+	strncpy(from_name, from->name, IP_SET_MAXNAMELEN);
-+	from_ref = atomic_read(&from->ref);
-+
-+	strncpy(from->name, to->name, IP_SET_MAXNAMELEN);
-+	atomic_set(&from->ref, atomic_read(&to->ref));
-+	strncpy(to->name, from_name, IP_SET_MAXNAMELEN);
-+	atomic_set(&to->ref, from_ref);
-+	
-+	ip_set_list[from_index] = to;
-+	ip_set_list[to_index] = from;
-+	
-+	write_unlock_bh(&ip_set_lock);
-+	return 0;
-+}
-+
-+/*
-+ * List set data
-+ */
-+
-+static inline void
-+__set_hash_bindings_size_list(struct ip_set_hash *set_hash,
-+			      ip_set_id_t id, size_t *size)
-+{
-+	if (set_hash->id == id)
-+		*size += sizeof(struct ip_set_hash_list);
-+}
-+
-+static inline void
-+__set_hash_bindings_size_save(struct ip_set_hash *set_hash,
-+			      ip_set_id_t id, size_t *size)
-+{
-+	if (set_hash->id == id)
-+		*size += sizeof(struct ip_set_hash_save);
-+}
-+
-+static inline void
-+__set_hash_bindings(struct ip_set_hash *set_hash,
-+		    ip_set_id_t id, void *data, int *used)
-+{
-+	if (set_hash->id == id) {
-+		struct ip_set_hash_list *hash_list = 
-+			(struct ip_set_hash_list *)(data + *used);
-+
-+		hash_list->ip = set_hash->ip;
-+		hash_list->binding = set_hash->binding;
-+		*used += sizeof(struct ip_set_hash_list);
-+	}
-+}
-+
-+static int ip_set_list_set(ip_set_id_t index,
-+			   void *data,
-+			   int *used,
-+			   int len)
-+{
-+	struct ip_set *set = ip_set_list[index];
-+	struct ip_set_list *set_list;
-+
-+	/* Pointer to our header */
-+	set_list = (struct ip_set_list *) (data + *used);
-+
-+	DP("set: %s, used: %d %p %p", set->name, *used, data, data + *used);
-+
-+	/* Get and ensure header size */
-+	if (*used + sizeof(struct ip_set_list) > len)
-+		goto not_enough_mem;
-+	*used += sizeof(struct ip_set_list);
-+
-+	read_lock_bh(&set->lock);
-+	/* Get and ensure set specific header size */
-+	set_list->header_size = set->type->header_size;
-+	if (*used + set_list->header_size > len)
-+		goto unlock_set;
-+
-+	/* Fill in the header */
-+	set_list->index = index;
-+	set_list->binding = set->binding;
-+	set_list->ref = atomic_read(&set->ref);
-+
-+	/* Fill in set spefific header data */
-+	set->type->list_header(set, data + *used);
-+	*used += set_list->header_size;
-+
-+	/* Get and ensure set specific members size */
-+	set_list->members_size = set->type->list_members_size(set);
-+	if (*used + set_list->members_size > len)
-+		goto unlock_set;
-+
-+	/* Fill in set spefific members data */
-+	set->type->list_members(set, data + *used);
-+	*used += set_list->members_size;
-+	read_unlock_bh(&set->lock);
-+
-+	/* Bindings */
-+
-+	/* Get and ensure set specific bindings size */
-+	set_list->bindings_size = 0;
-+	FOREACH_HASH_DO(__set_hash_bindings_size_list,
-+			set->id, &set_list->bindings_size);
-+	if (*used + set_list->bindings_size > len)
-+		goto not_enough_mem;
-+
-+	/* Fill in set spefific bindings data */
-+	FOREACH_HASH_DO(__set_hash_bindings, set->id, data, used);
-+	
-+	return 0;
-+
-+    unlock_set:
-+	read_unlock_bh(&set->lock);
-+    not_enough_mem:
-+	DP("not enough mem, try again");
-+	return -EAGAIN;
-+}
-+
-+/*
-+ * Save sets
-+ */
-+static int ip_set_save_set(ip_set_id_t index,
-+			   void *data,
-+			   int *used,
-+			   int len)
-+{
-+	struct ip_set *set;
-+	struct ip_set_save *set_save;
-+
-+	/* Pointer to our header */
-+	set_save = (struct ip_set_save *) (data + *used);
-+
-+	/* Get and ensure header size */
-+	if (*used + sizeof(struct ip_set_save) > len)
-+		goto not_enough_mem;
-+	*used += sizeof(struct ip_set_save);
-+
-+	set = ip_set_list[index];
-+	DP("set: %s, used: %u(%u) %p %p", set->name, *used, len, 
-+	   data, data + *used);
-+
-+	read_lock_bh(&set->lock);
-+	/* Get and ensure set specific header size */
-+	set_save->header_size = set->type->header_size;
-+	if (*used + set_save->header_size > len)
-+		goto unlock_set;
-+
-+	/* Fill in the header */
-+	set_save->index = index;
-+	set_save->binding = set->binding;
-+
-+	/* Fill in set spefific header data */
-+	set->type->list_header(set, data + *used);
-+	*used += set_save->header_size;
-+
-+	DP("set header filled: %s, used: %u %p %p", set->name, *used,
-+	   data, data + *used);
-+	/* Get and ensure set specific members size */
-+	set_save->members_size = set->type->list_members_size(set);
-+	if (*used + set_save->members_size > len)
-+		goto unlock_set;
-+
-+	/* Fill in set spefific members data */
-+	set->type->list_members(set, data + *used);
-+	*used += set_save->members_size;
-+	read_unlock_bh(&set->lock);
-+	DP("set members filled: %s, used: %u %p %p", set->name, *used,
-+	   data, data + *used);
-+	return 0;
-+
-+    unlock_set:
-+	read_unlock_bh(&set->lock);
-+    not_enough_mem:
-+	DP("not enough mem, try again");
-+	return -EAGAIN;
-+}
-+
-+static inline void
-+__set_hash_save_bindings(struct ip_set_hash *set_hash,
-+			 ip_set_id_t id,
-+			 void *data,
-+			 int *used,
-+			 int len,
-+			 int *res)
-+{
-+	if (*res == 0
-+	    && (id == IP_SET_INVALID_ID || set_hash->id == id)) {
-+		struct ip_set_hash_save *hash_save = 
-+			(struct ip_set_hash_save *)(data + *used);
-+		/* Ensure bindings size */
-+		if (*used + sizeof(struct ip_set_hash_save) > len) {
-+			*res = -ENOMEM;
-+			return;
-+		}
-+		hash_save->id = set_hash->id;
-+		hash_save->ip = set_hash->ip;
-+		hash_save->binding = set_hash->binding;
-+		*used += sizeof(struct ip_set_hash_save);
-+	}
-+}
-+
-+static int ip_set_save_bindings(ip_set_id_t index,
-+			   	void *data,
-+			   	int *used,
-+			   	int len)
-+{
-+	int res = 0;
-+	struct ip_set_save *set_save;
-+
-+	DP("used %u, len %u", *used, len);
-+	/* Get and ensure header size */
-+	if (*used + sizeof(struct ip_set_save) > len)
-+		return -ENOMEM;
-+
-+	/* Marker */
-+	set_save = (struct ip_set_save *) (data + *used);
-+	set_save->index = IP_SET_INVALID_ID;
-+	*used += sizeof(struct ip_set_save);
-+
-+	DP("marker added used %u, len %u", *used, len);
-+	/* Fill in bindings data */
-+	if (index != IP_SET_INVALID_ID)
-+		/* Sets are identified by id in hash */
-+		index = ip_set_list[index]->id;
-+	FOREACH_HASH_DO(__set_hash_save_bindings, index, data, used, len, &res);
-+
-+	return res;	
-+}
-+
-+/*
-+ * Restore sets
-+ */
-+static int ip_set_restore(void *data,
-+			  int len)
-+{
-+	int res = 0;
-+	int line = 0, used = 0, members_size;
-+	struct ip_set *set;
-+	struct ip_set_hash_save *hash_save;
-+	struct ip_set_restore *set_restore;
-+	ip_set_id_t index;
-+
-+	/* Loop to restore sets */
-+	while (1) {
-+		line++;
-+		
-+		DP("%u %u %u", used, sizeof(struct ip_set_restore), len);
-+		/* Get and ensure header size */
-+		if (used + sizeof(struct ip_set_restore) > len)
-+			return line;
-+		set_restore = (struct ip_set_restore *) (data + used);
-+		used += sizeof(struct ip_set_restore);
-+
-+		/* Ensure data size */
-+		if (used 
-+		    + set_restore->header_size 
-+		    + set_restore->members_size > len)
-+			return line;
-+
-+		/* Check marker */
-+		if (set_restore->index == IP_SET_INVALID_ID) {
-+			line--;
-+			goto bindings;
-+		}
-+		
-+		/* Try to create the set */
-+		DP("restore %s %s", set_restore->name, set_restore->typename);
-+		res = ip_set_create(set_restore->name,
-+				    set_restore->typename,
-+				    set_restore->index,
-+				    data + used,
-+				    set_restore->header_size);
-+		
-+		if (res != 0)
-+			return line;
-+		used += set_restore->header_size;
-+
-+		index = ip_set_find_byindex(set_restore->index);
-+		DP("index %u, restore_index %u", index, set_restore->index);
-+		if (index != set_restore->index)
-+			return line;
-+		/* Try to restore members data */
-+		set = ip_set_list[index];
-+		members_size = 0;
-+		DP("members_size %u reqsize %u",
-+		   set_restore->members_size, set->type->reqsize);
-+		while (members_size + set->type->reqsize <=
-+		       set_restore->members_size) {
-+			line++;
-+		       	DP("members: %u, line %u", members_size, line);
-+			res = __ip_set_addip(index,
-+					   data + used + members_size,
-+					   set->type->reqsize);
-+			if (!(res == 0 || res == -EEXIST)) 
-+				return line;
-+			members_size += set->type->reqsize;
-+		}
-+
-+		DP("members_size %u  %u",
-+		   set_restore->members_size, members_size);
-+		if (members_size != set_restore->members_size)
-+			return line++;
-+		used += set_restore->members_size;		
-+	}
-+	
-+   bindings:
-+   	/* Loop to restore bindings */
-+   	while (used < len) {
-+		line++;
-+
-+		DP("restore binding, line %u", line);		
-+		/* Get and ensure size */
-+		if (used + sizeof(struct ip_set_hash_save) > len)
-+			return line;
-+		hash_save = (struct ip_set_hash_save *) (data + used);
-+		used += sizeof(struct ip_set_hash_save);
-+		
-+		/* hash_save->id is used to store the index */
-+		index = ip_set_find_byindex(hash_save->id);
-+		DP("restore binding index %u, id %u, %u -> %u",
-+		   index, hash_save->id, hash_save->ip, hash_save->binding);		
-+		if (index != hash_save->id)
-+			return line;
-+			
-+		set = ip_set_list[hash_save->id];
-+		/* Null valued IP means default binding */
-+		if (hash_save->ip)
-+			res = ip_set_hash_add(set->id, 
-+					      hash_save->ip,
-+					      hash_save->binding);
-+		else {
-+			IP_SET_ASSERT(set->binding == IP_SET_INVALID_ID);
-+			write_lock_bh(&ip_set_lock);
-+			set->binding = hash_save->binding;
-+			__ip_set_get(set->binding);
-+			write_unlock_bh(&ip_set_lock);
-+			DP("default binding: %u", set->binding);
-+		}
-+		if (res != 0)
-+			return line;
-+   	}
-+   	if (used != len)
-+   		return line;
-+   	
-+	return 0;	
-+}
-+
-+static int
-+ip_set_sockfn_set(struct sock *sk, int optval, void *user, unsigned int len)
-+{
-+	void *data;
-+	int res = 0;		/* Assume OK */
-+	unsigned *op;
-+	struct ip_set_req_adt *req_adt;
-+	ip_set_id_t index = IP_SET_INVALID_ID;
-+	int (*adtfn)(ip_set_id_t index,
-+		     const void *data, size_t size);
-+	struct fn_table {
-+		int (*fn)(ip_set_id_t index,
-+			  const void *data, size_t size);
-+	} adtfn_table[] =
-+	{ { ip_set_addip }, { ip_set_delip }, { ip_set_testip},
-+	  { ip_set_bindip}, { ip_set_unbindip }, { ip_set_testbind },
-+	};
-+
-+	DP("optval=%d, user=%p, len=%d", optval, user, len);
-+	if (!capable(CAP_NET_ADMIN))
-+		return -EPERM;
-+	if (optval != SO_IP_SET)
-+		return -EBADF;
-+	if (len <= sizeof(unsigned)) {
-+		ip_set_printk("short userdata (want >%zu, got %u)",
-+			      sizeof(unsigned), len);
-+		return -EINVAL;
-+	}
-+	data = vmalloc(len);
-+	if (!data) {
-+		DP("out of mem for %u bytes", len);
-+		return -ENOMEM;
-+	}
-+	if (copy_from_user(data, user, len) != 0) {
-+		res = -EFAULT;
-+		goto done;
-+	}
-+	if (down_interruptible(&ip_set_app_mutex)) {
-+		res = -EINTR;
-+		goto done;
-+	}
-+
-+	op = (unsigned *)data;
-+	DP("op=%x", *op);
-+	
-+	if (*op < IP_SET_OP_VERSION) {
-+		/* Check the version at the beginning of operations */
-+		struct ip_set_req_version *req_version =
-+			(struct ip_set_req_version *) data;
-+		if (req_version->version != IP_SET_PROTOCOL_VERSION) {
-+			res = -EPROTO;
-+			goto done;
-+		}
-+	}
-+
-+	switch (*op) {
-+	case IP_SET_OP_CREATE:{
-+		struct ip_set_req_create *req_create
-+			= (struct ip_set_req_create *) data;
-+		
-+		if (len <= sizeof(struct ip_set_req_create)) {
-+			ip_set_printk("short CREATE data (want >%zu, got %u)",
-+				      sizeof(struct ip_set_req_create), len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		req_create->name[IP_SET_MAXNAMELEN - 1] = '\0';
-+		req_create->typename[IP_SET_MAXNAMELEN - 1] = '\0';
-+		res = ip_set_create(req_create->name,
-+				    req_create->typename,
-+				    IP_SET_INVALID_ID,
-+				    data + sizeof(struct ip_set_req_create),
-+				    len - sizeof(struct ip_set_req_create));
-+		goto done;
-+	}
-+	case IP_SET_OP_DESTROY:{
-+		struct ip_set_req_std *req_destroy
-+			= (struct ip_set_req_std *) data;
-+		
-+		if (len != sizeof(struct ip_set_req_std)) {
-+			ip_set_printk("invalid DESTROY data (want %zu, got %u)",
-+				      sizeof(struct ip_set_req_std), len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		if (strcmp(req_destroy->name, IPSET_TOKEN_ALL) == 0) {
-+			/* Destroy all sets */
-+			index = IP_SET_INVALID_ID;
-+		} else {
-+			req_destroy->name[IP_SET_MAXNAMELEN - 1] = '\0';
-+			index = ip_set_find_byname(req_destroy->name);
-+
-+			if (index == IP_SET_INVALID_ID) {
-+				res = -ENOENT;
-+				goto done;
-+			}
-+		}
-+			
-+		res = ip_set_destroy(index);
-+		goto done;
-+	}
-+	case IP_SET_OP_FLUSH:{
-+		struct ip_set_req_std *req_flush =
-+			(struct ip_set_req_std *) data;
-+
-+		if (len != sizeof(struct ip_set_req_std)) {
-+			ip_set_printk("invalid FLUSH data (want %zu, got %u)",
-+				      sizeof(struct ip_set_req_std), len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		if (strcmp(req_flush->name, IPSET_TOKEN_ALL) == 0) {
-+			/* Flush all sets */
-+			index = IP_SET_INVALID_ID;
-+		} else {
-+			req_flush->name[IP_SET_MAXNAMELEN - 1] = '\0';
-+			index = ip_set_find_byname(req_flush->name);
-+
-+			if (index == IP_SET_INVALID_ID) {
-+				res = -ENOENT;
-+				goto done;
-+			}
-+		}
-+		res = ip_set_flush(index);
-+		goto done;
-+	}
-+	case IP_SET_OP_RENAME:{
-+		struct ip_set_req_create *req_rename
-+			= (struct ip_set_req_create *) data;
-+
-+		if (len != sizeof(struct ip_set_req_create)) {
-+			ip_set_printk("invalid RENAME data (want %zu, got %u)",
-+				      sizeof(struct ip_set_req_create), len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+
-+		req_rename->name[IP_SET_MAXNAMELEN - 1] = '\0';
-+		req_rename->typename[IP_SET_MAXNAMELEN - 1] = '\0';
-+			
-+		index = ip_set_find_byname(req_rename->name);
-+		if (index == IP_SET_INVALID_ID) {
-+			res = -ENOENT;
-+			goto done;
-+		}
-+		res = ip_set_rename(index, req_rename->typename);
-+		goto done;
-+	}
-+	case IP_SET_OP_SWAP:{
-+		struct ip_set_req_create *req_swap
-+			= (struct ip_set_req_create *) data;
-+		ip_set_id_t to_index;
-+
-+		if (len != sizeof(struct ip_set_req_create)) {
-+			ip_set_printk("invalid SWAP data (want %zu, got %u)",
-+				      sizeof(struct ip_set_req_create), len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+
-+		req_swap->name[IP_SET_MAXNAMELEN - 1] = '\0';
-+		req_swap->typename[IP_SET_MAXNAMELEN - 1] = '\0';
-+
-+		index = ip_set_find_byname(req_swap->name);
-+		if (index == IP_SET_INVALID_ID) {
-+			res = -ENOENT;
-+			goto done;
-+		}
-+		to_index = ip_set_find_byname(req_swap->typename);
-+		if (to_index == IP_SET_INVALID_ID) {
-+			res = -ENOENT;
-+			goto done;
-+		}
-+		res = ip_set_swap(index, to_index);
-+		goto done;
-+	}
-+	default: 
-+		break;	/* Set identified by id */
-+	}
-+	
-+	/* There we may have add/del/test/bind/unbind/test_bind operations */
-+	if (*op < IP_SET_OP_ADD_IP || *op > IP_SET_OP_TEST_BIND_SET) {
-+		res = -EBADMSG;
-+		goto done;
-+	}
-+	adtfn = adtfn_table[*op - IP_SET_OP_ADD_IP].fn;
-+
-+	if (len < sizeof(struct ip_set_req_adt)) {
-+		ip_set_printk("short data in adt request (want >=%zu, got %u)",
-+			      sizeof(struct ip_set_req_adt), len);
-+		res = -EINVAL;
-+		goto done;
-+	}
-+	req_adt = (struct ip_set_req_adt *) data;
-+
-+	/* -U :all: :all:|:default: uses IP_SET_INVALID_ID */
-+	if (!(*op == IP_SET_OP_UNBIND_SET 
-+	      && req_adt->index == IP_SET_INVALID_ID)) {
-+		index = ip_set_find_byindex(req_adt->index);
-+		if (index == IP_SET_INVALID_ID) {
-+			res = -ENOENT;
-+			goto done;
-+		}
-+	}
-+	res = adtfn(index, data, len);
-+
-+    done:
-+	up(&ip_set_app_mutex);
-+	vfree(data);
-+	if (res > 0)
-+		res = 0;
-+	DP("final result %d", res);
-+	return res;
-+}
-+
-+static int 
-+ip_set_sockfn_get(struct sock *sk, int optval, void *user, int *len)
-+{
-+	int res = 0;
-+	unsigned *op;
-+	ip_set_id_t index = IP_SET_INVALID_ID;
-+	void *data;
-+	int copylen = *len;
-+
-+	DP("optval=%d, user=%p, len=%d", optval, user, *len);
-+	if (!capable(CAP_NET_ADMIN))
-+		return -EPERM;
-+	if (optval != SO_IP_SET)
-+		return -EBADF;
-+	if (*len < sizeof(unsigned)) {
-+		ip_set_printk("short userdata (want >=%zu, got %d)",
-+			      sizeof(unsigned), *len);
-+		return -EINVAL;
-+	}
-+	data = vmalloc(*len);
-+	if (!data) {
-+		DP("out of mem for %d bytes", *len);
-+		return -ENOMEM;
-+	}
-+	if (copy_from_user(data, user, *len) != 0) {
-+		res = -EFAULT;
-+		goto done;
-+	}
-+	if (down_interruptible(&ip_set_app_mutex)) {
-+		res = -EINTR;
-+		goto done;
-+	}
-+
-+	op = (unsigned *) data;
-+	DP("op=%x", *op);
-+
-+	if (*op < IP_SET_OP_VERSION) {
-+		/* Check the version at the beginning of operations */
-+		struct ip_set_req_version *req_version =
-+			(struct ip_set_req_version *) data;
-+		if (req_version->version != IP_SET_PROTOCOL_VERSION) {
-+			res = -EPROTO;
-+			goto done;
-+		}
-+	}
-+
-+	switch (*op) {
-+	case IP_SET_OP_VERSION: {
-+		struct ip_set_req_version *req_version =
-+		    (struct ip_set_req_version *) data;
-+
-+		if (*len != sizeof(struct ip_set_req_version)) {
-+			ip_set_printk("invalid VERSION (want %zu, got %d)",
-+				      sizeof(struct ip_set_req_version),
-+				      *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+
-+		req_version->version = IP_SET_PROTOCOL_VERSION;
-+		res = copy_to_user(user, req_version,
-+				   sizeof(struct ip_set_req_version));
-+		goto done;
-+	}
-+	case IP_SET_OP_GET_BYNAME: {
-+		struct ip_set_req_get_set *req_get
-+			= (struct ip_set_req_get_set *) data;
-+
-+		if (*len != sizeof(struct ip_set_req_get_set)) {
-+			ip_set_printk("invalid GET_BYNAME (want %zu, got %d)",
-+				      sizeof(struct ip_set_req_get_set), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		req_get->set.name[IP_SET_MAXNAMELEN - 1] = '\0';
-+		index = ip_set_find_byname(req_get->set.name);
-+		req_get->set.index = index;
-+		goto copy;
-+	}
-+	case IP_SET_OP_GET_BYINDEX: {
-+		struct ip_set_req_get_set *req_get
-+			= (struct ip_set_req_get_set *) data;
-+
-+		if (*len != sizeof(struct ip_set_req_get_set)) {
-+			ip_set_printk("invalid GET_BYINDEX (want %zu, got %d)",
-+				      sizeof(struct ip_set_req_get_set), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		req_get->set.name[IP_SET_MAXNAMELEN - 1] = '\0';
-+		index = ip_set_find_byindex(req_get->set.index);
-+		strncpy(req_get->set.name,
-+			index == IP_SET_INVALID_ID ? ""
-+			: ip_set_list[index]->name, IP_SET_MAXNAMELEN);
-+		goto copy;
-+	}
-+	case IP_SET_OP_ADT_GET: {
-+		struct ip_set_req_adt_get *req_get
-+			= (struct ip_set_req_adt_get *) data;
-+
-+		if (*len != sizeof(struct ip_set_req_adt_get)) {
-+			ip_set_printk("invalid ADT_GET (want %zu, got %d)",
-+				      sizeof(struct ip_set_req_adt_get), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		req_get->set.name[IP_SET_MAXNAMELEN - 1] = '\0';
-+		index = ip_set_find_byname(req_get->set.name);
-+		if (index != IP_SET_INVALID_ID) {
-+			req_get->set.index = index;
-+			strncpy(req_get->typename,
-+				ip_set_list[index]->type->typename,
-+				IP_SET_MAXNAMELEN - 1);
-+		} else {
-+			res = -ENOENT;
-+			goto done;
-+		}
-+		goto copy;
-+	}
-+	case IP_SET_OP_MAX_SETS: {
-+		struct ip_set_req_max_sets *req_max_sets
-+			= (struct ip_set_req_max_sets *) data;
-+		ip_set_id_t i;
-+
-+		if (*len != sizeof(struct ip_set_req_max_sets)) {
-+			ip_set_printk("invalid MAX_SETS (want %zu, got %d)",
-+				      sizeof(struct ip_set_req_max_sets), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+
-+		if (strcmp(req_max_sets->set.name, IPSET_TOKEN_ALL) == 0) {
-+			req_max_sets->set.index = IP_SET_INVALID_ID;
-+		} else {
-+			req_max_sets->set.name[IP_SET_MAXNAMELEN - 1] = '\0';
-+			req_max_sets->set.index = 
-+				ip_set_find_byname(req_max_sets->set.name);
-+			if (req_max_sets->set.index == IP_SET_INVALID_ID) {
-+				res = -ENOENT;
-+				goto done;
-+			}
-+		}
-+		req_max_sets->max_sets = ip_set_max;
-+		req_max_sets->sets = 0;
-+		for (i = 0; i < ip_set_max; i++) {
-+			if (ip_set_list[i] != NULL)
-+				req_max_sets->sets++;
-+		}
-+		goto copy;
-+	}
-+	case IP_SET_OP_LIST_SIZE: 
-+	case IP_SET_OP_SAVE_SIZE: {
-+		struct ip_set_req_setnames *req_setnames
-+			= (struct ip_set_req_setnames *) data;
-+		struct ip_set_name_list *name_list;
-+		struct ip_set *set;
-+		ip_set_id_t i;
-+		int used;
-+
-+		if (*len < sizeof(struct ip_set_req_setnames)) {
-+			ip_set_printk("short LIST_SIZE (want >=%zu, got %d)",
-+				      sizeof(struct ip_set_req_setnames), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+
-+		req_setnames->size = 0;
-+		used = sizeof(struct ip_set_req_setnames);
-+		for (i = 0; i < ip_set_max; i++) {
-+			if (ip_set_list[i] == NULL)
-+				continue;
-+			name_list = (struct ip_set_name_list *) 
-+				(data + used);
-+			used += sizeof(struct ip_set_name_list);
-+			if (used > copylen) {
-+				res = -EAGAIN;
-+				goto done;
-+			}
-+			set = ip_set_list[i];
-+			/* Fill in index, name, etc. */
-+			name_list->index = i;
-+			name_list->id = set->id;
-+			strncpy(name_list->name,
-+				set->name,
-+				IP_SET_MAXNAMELEN - 1);
-+			strncpy(name_list->typename,
-+				set->type->typename,
-+				IP_SET_MAXNAMELEN - 1);
-+			DP("filled %s of type %s, index %u\n",
-+			   name_list->name, name_list->typename,
-+			   name_list->index);
-+			if (!(req_setnames->index == IP_SET_INVALID_ID
-+			      || req_setnames->index == i))
-+			      continue;
-+			/* Update size */
-+			switch (*op) {
-+			case IP_SET_OP_LIST_SIZE: {
-+				req_setnames->size += sizeof(struct ip_set_list)
-+					+ set->type->header_size
-+					+ set->type->list_members_size(set);
-+				FOREACH_HASH_DO(__set_hash_bindings_size_list, 
-+						i, &req_setnames->size);
-+				break;
-+			}
-+			case IP_SET_OP_SAVE_SIZE: {
-+				req_setnames->size += sizeof(struct ip_set_save)
-+					+ set->type->header_size
-+					+ set->type->list_members_size(set);
-+				FOREACH_HASH_DO(__set_hash_bindings_size_save,
-+						i, &req_setnames->size);
-+				break;
-+			}
-+			default:
-+				break;
-+			}
-+		}
-+		if (copylen != used) {
-+			res = -EAGAIN;
-+			goto done;
-+		}
-+		goto copy;
-+	}
-+	case IP_SET_OP_LIST: {
-+		struct ip_set_req_list *req_list
-+			= (struct ip_set_req_list *) data;
-+		ip_set_id_t i;
-+		int used;
-+
-+		if (*len < sizeof(struct ip_set_req_list)) {
-+			ip_set_printk("short LIST (want >=%zu, got %d)",
-+				      sizeof(struct ip_set_req_list), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		index = req_list->index;
-+		if (index != IP_SET_INVALID_ID
-+		    && ip_set_find_byindex(index) != index) {
-+		    	res = -ENOENT;
-+		    	goto done;
-+		}
-+		used = 0;
-+		if (index == IP_SET_INVALID_ID) {
-+			/* List all sets */
-+			for (i = 0; i < ip_set_max && res == 0; i++) {
-+				if (ip_set_list[i] != NULL)
-+					res = ip_set_list_set(i, data, &used, *len);
-+			}
-+		} else {
-+			/* List an individual set */
-+			res = ip_set_list_set(index, data, &used, *len);
-+		}
-+		if (res != 0)
-+			goto done;
-+		else if (copylen != used) {
-+			res = -EAGAIN;
-+			goto done;
-+		}
-+		goto copy;
-+	}
-+	case IP_SET_OP_SAVE: {
-+		struct ip_set_req_list *req_save
-+			= (struct ip_set_req_list *) data;
-+		ip_set_id_t i;
-+		int used;
-+
-+		if (*len < sizeof(struct ip_set_req_list)) {
-+			ip_set_printk("short SAVE (want >=%zu, got %d)",
-+				      sizeof(struct ip_set_req_list), *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		index = req_save->index;
-+		if (index != IP_SET_INVALID_ID
-+		    && ip_set_find_byindex(index) != index) {
-+		    	res = -ENOENT;
-+		    	goto done;
-+		}
-+		used = 0;
-+		if (index == IP_SET_INVALID_ID) {
-+			/* Save all sets */
-+			for (i = 0; i < ip_set_max && res == 0; i++) {
-+				if (ip_set_list[i] != NULL)
-+					res = ip_set_save_set(i, data, &used, *len);
-+			}
-+		} else {
-+			/* Save an individual set */
-+			res = ip_set_save_set(index, data, &used, *len);
-+		}
-+		if (res == 0)
-+			res = ip_set_save_bindings(index, data, &used, *len);
-+			
-+		if (res != 0)
-+			goto done;
-+		else if (copylen != used) {
-+			res = -EAGAIN;
-+			goto done;
-+		}
-+		goto copy;
-+	}
-+	case IP_SET_OP_RESTORE: {
-+		struct ip_set_req_setnames *req_restore
-+			= (struct ip_set_req_setnames *) data;
-+		int line;
-+
-+		if (*len < sizeof(struct ip_set_req_setnames)
-+		    || *len != req_restore->size) {
-+			ip_set_printk("invalid RESTORE (want =%zu, got %d)",
-+				      req_restore->size, *len);
-+			res = -EINVAL;
-+			goto done;
-+		}
-+		line = ip_set_restore(data + sizeof(struct ip_set_req_setnames),
-+				      req_restore->size - sizeof(struct ip_set_req_setnames));
-+		DP("ip_set_restore: %u", line);
-+		if (line != 0) {
-+			res = -EAGAIN;
-+			req_restore->size = line;
-+			copylen = sizeof(struct ip_set_req_setnames);
-+			goto copy;
-+		}
-+		goto done;
-+	}
-+	default:
-+		res = -EBADMSG;
-+		goto done;
-+	}	/* end of switch(op) */
-+
-+    copy:
-+   	DP("set %s, copylen %u", index != IP_SET_INVALID_ID
-+   	             		 && ip_set_list[index]
-+   	             ? ip_set_list[index]->name
-+   	             : ":all:", copylen);
-+	if (res == 0)
-+		res = copy_to_user(user, data, copylen);
-+	else
-+		copy_to_user(user, data, copylen);
-+    	
-+    done:
-+	up(&ip_set_app_mutex);
-+	vfree(data);
-+	if (res > 0)
-+		res = 0;
-+	DP("final result %d", res);
-+	return res;
-+}
-+
-+static struct nf_sockopt_ops so_set = {
-+	.pf 		= PF_INET,
-+	.set_optmin 	= SO_IP_SET,
-+	.set_optmax 	= SO_IP_SET + 1,
-+	.set 		= &ip_set_sockfn_set,
-+	.get_optmin 	= SO_IP_SET,
-+	.get_optmax	= SO_IP_SET + 1,
-+	.get		= &ip_set_sockfn_get,
-+	.use		= 0
-+};
-+
-+static int max_sets, hash_size;
-+module_param(max_sets, int, 0600);
-+MODULE_PARM_DESC(max_sets, "maximal number of sets");
-+module_param(hash_size, int, 0600);
-+MODULE_PARM_DESC(hash_size, "hash size for bindings");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("module implementing core IP set support");
-+
-+static int __init init(void)
-+{
-+	int res;
-+	ip_set_id_t i;
-+
-+	get_random_bytes(&ip_set_hash_random, 4);
-+	if (max_sets)
-+		ip_set_max = max_sets;
-+	ip_set_list = vmalloc(sizeof(struct ip_set *) * ip_set_max);
-+	if (!ip_set_list) {
-+		printk(KERN_ERR "Unable to create ip_set_list\n");
-+		return -ENOMEM;
-+	}
-+	memset(ip_set_list, 0, sizeof(struct ip_set *) * ip_set_max);
-+	if (hash_size)
-+		ip_set_bindings_hash_size = hash_size;
-+	ip_set_hash = vmalloc(sizeof(struct list_head) * ip_set_bindings_hash_size);
-+	if (!ip_set_hash) {
-+		printk(KERN_ERR "Unable to create ip_set_hash\n");
-+		vfree(ip_set_list);
-+		return -ENOMEM;
-+	}
-+	for (i = 0; i < ip_set_bindings_hash_size; i++)
-+		INIT_LIST_HEAD(&ip_set_hash[i]);
-+
-+	INIT_LIST_HEAD(&set_type_list);
-+
-+	res = nf_register_sockopt(&so_set);
-+	if (res != 0) {
-+		ip_set_printk("SO_SET registry failed: %d", res);
-+		vfree(ip_set_list);
-+		vfree(ip_set_hash);
-+		return res;
-+	}
-+	return 0;
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* There can't be any existing set or binding */
-+	nf_unregister_sockopt(&so_set);
-+	vfree(ip_set_list);
-+	vfree(ip_set_hash);
-+	DP("these are the famous last words");
-+}
-+
-+EXPORT_SYMBOL(ip_set_register_set_type);
-+EXPORT_SYMBOL(ip_set_unregister_set_type);
-+
-+EXPORT_SYMBOL(ip_set_get_byname);
-+EXPORT_SYMBOL(ip_set_get_byindex);
-+EXPORT_SYMBOL(ip_set_put);
-+
-+EXPORT_SYMBOL(ip_set_addip_kernel);
-+EXPORT_SYMBOL(ip_set_delip_kernel);
-+EXPORT_SYMBOL(ip_set_testip_kernel);
-+
-+module_init(init);
-+module_exit(fini);
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ip_set_iphash.c linux-2.6.16-owrt/net/ipv4/netfilter/ip_set_iphash.c
---- linux-2.6.16/net/ipv4/netfilter/ip_set_iphash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ip_set_iphash.c	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,379 @@
-+/* Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module implementing an ip hash set */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <linux/spinlock.h>
-+#include <linux/vmalloc.h>
-+#include <linux/random.h>
-+
-+#include <net/ip.h>
-+
-+#include <linux/netfilter_ipv4/ip_set_malloc.h>
-+#include <linux/netfilter_ipv4/ip_set_iphash.h>
-+#include <linux/netfilter_ipv4/ip_set_jhash.h>
-+#include <linux/netfilter_ipv4/ip_set_prime.h>
-+
-+static inline __u32
-+jhash_ip(const struct ip_set_iphash *map, ip_set_ip_t ip)
-+{
-+	return jhash_1word(ip, map->initval);
-+}
-+
-+static inline __u32
-+randhash_ip(const struct ip_set_iphash *map, ip_set_ip_t ip)
-+{
-+	return (1 + ip % map->prime);
-+}
-+
-+static inline __u32
-+hash_id(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+	__u32 jhash, randhash, id;
-+	u_int16_t i;
-+
-+	*hash_ip = ip & map->netmask;
-+	jhash = jhash_ip(map, *hash_ip);
-+	randhash = randhash_ip(map, *hash_ip);
-+	DP("set: %s, ip:%u.%u.%u.%u, %u.%u.%u.%u, %u.%u.%u.%u",
-+	   set->name, HIPQUAD(ip), HIPQUAD(*hash_ip), HIPQUAD(map->netmask));
-+	
-+	for (i = 0; i < map->probes; i++) {
-+		id = (jhash + i * randhash) % map->hashsize;
-+		DP("hash key: %u", id);
-+		if (map->members[id] == *hash_ip)
-+			return id;
-+		/* No shortcut at testing - there can be deleted
-+		 * entries. */
-+	}
-+	return UINT_MAX;
-+}
-+
-+static inline int
-+__testip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	return (hash_id(set, ip, hash_ip) != UINT_MAX);
-+}
-+
-+static int
-+testip(struct ip_set *set, const void *data, size_t size,
-+       ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_iphash *req = 
-+	    (struct ip_set_req_iphash *) data;
-+
-+	if (size != sizeof(struct ip_set_req_iphash)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iphash),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __testip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+testip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+		u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __testip(set,
-+			ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+						: skb->nh.iph->daddr),
-+			hash_ip);
-+}
-+
-+static inline int
-+__addip(struct ip_set_iphash *map, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	__u32 jhash, randhash, probe;
-+	u_int16_t i;
-+
-+	*hash_ip = ip & map->netmask;
-+	jhash = jhash_ip(map, *hash_ip);
-+	randhash = randhash_ip(map, *hash_ip);
-+	
-+	for (i = 0; i < map->probes; i++) {
-+		probe = (jhash + i * randhash) % map->hashsize;
-+		if (map->members[probe] == *hash_ip)
-+			return -EEXIST;
-+		if (!map->members[probe]) {
-+			map->members[probe] = *hash_ip;
-+			return 0;
-+		}
-+	}
-+	/* Trigger rehashing */
-+	return -EAGAIN;
-+}
-+
-+static int
-+addip(struct ip_set *set, const void *data, size_t size,
-+        ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_iphash *req = 
-+	    (struct ip_set_req_iphash *) data;
-+
-+	if (size != sizeof(struct ip_set_req_iphash)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iphash),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __addip((struct ip_set_iphash *) set->data, req->ip, hash_ip);
-+}
-+
-+static int
-+addip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __addip((struct ip_set_iphash *) set->data,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       hash_ip);
-+}
-+
-+static int retry(struct ip_set *set)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+	ip_set_ip_t hash_ip, *members;
-+	u_int32_t i, hashsize;
-+	unsigned newbytes;
-+	int res;
-+	struct ip_set_iphash tmp = {
-+		.hashsize = map->hashsize,
-+		.probes = map->probes,
-+		.resize = map->resize,
-+		.netmask = map->netmask,
-+	};
-+	
-+	if (map->resize == 0)
-+		return -ERANGE;
-+
-+    again:
-+    	res = 0;
-+    	
-+	/* Calculate new parameters */
-+	get_random_bytes(&tmp.initval, 4);
-+	hashsize = tmp.hashsize + (tmp.hashsize * map->resize)/100;
-+	if (hashsize == tmp.hashsize)
-+		hashsize++;
-+	tmp.prime = make_prime(hashsize);
-+	
-+	ip_set_printk("rehashing of set %s triggered: "
-+		      "hashsize grows from %u to %u",
-+		      set->name, tmp.hashsize, hashsize);
-+	tmp.hashsize = hashsize;
-+	
-+	newbytes = hashsize * sizeof(ip_set_ip_t);
-+	tmp.members = ip_set_malloc_atomic(newbytes);
-+	if (!tmp.members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		return -ENOMEM;
-+	}
-+	memset(tmp.members, 0, newbytes);
-+	
-+	write_lock_bh(&set->lock);
-+	map = (struct ip_set_iphash *) set->data; /* Play safe */
-+	for (i = 0; i < map->hashsize && res == 0; i++) {
-+		if (map->members[i])
-+			res = __addip(&tmp, map->members[i], &hash_ip);
-+	}
-+	if (res) {
-+		/* Failure, try again */
-+		write_unlock_bh(&set->lock);
-+		ip_set_free(tmp.members, newbytes);
-+		goto again;
-+	}
-+	
-+	/* Success at resizing! */
-+	members = map->members;
-+	hashsize = map->hashsize;
-+
-+	map->initval = tmp.initval;
-+	map->prime = tmp.prime;
-+	map->hashsize = tmp.hashsize;
-+	map->members = tmp.members;
-+	write_unlock_bh(&set->lock);
-+
-+	ip_set_free(members, hashsize * sizeof(ip_set_ip_t));
-+
-+	return 0;
-+}
-+
-+static inline int
-+__delip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+	ip_set_ip_t id = hash_id(set, ip, hash_ip);
-+
-+	if (id == UINT_MAX)
-+		return -EEXIST;
-+		
-+	map->members[id] = 0;
-+	return 0;
-+}
-+
-+static int
-+delip(struct ip_set *set, const void *data, size_t size,
-+        ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_iphash *req =
-+	    (struct ip_set_req_iphash *) data;
-+
-+	if (size != sizeof(struct ip_set_req_iphash)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iphash),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __delip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+delip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	       u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __delip(set,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       hash_ip);
-+}
-+
-+static int create(struct ip_set *set, const void *data, size_t size)
-+{
-+	unsigned newbytes;
-+	struct ip_set_req_iphash_create *req =
-+	    (struct ip_set_req_iphash_create *) data;
-+	struct ip_set_iphash *map;
-+
-+	if (size != sizeof(struct ip_set_req_iphash_create)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			       sizeof(struct ip_set_req_iphash_create),
-+			       size);
-+		return -EINVAL;
-+	}
-+
-+	if (req->hashsize < 1) {
-+		ip_set_printk("hashsize too small");
-+		return -ENOEXEC;
-+	}
-+
-+	map = kmalloc(sizeof(struct ip_set_iphash), GFP_KERNEL);
-+	if (!map) {
-+		DP("out of memory for %d bytes",
-+		   sizeof(struct ip_set_iphash));
-+		return -ENOMEM;
-+	}
-+	get_random_bytes(&map->initval, 4);
-+	map->prime = make_prime(req->hashsize);
-+	map->hashsize = req->hashsize;
-+	map->probes = req->probes;
-+	map->resize = req->resize;
-+	map->netmask = req->netmask;
-+	newbytes = map->hashsize * sizeof(ip_set_ip_t);
-+	map->members = ip_set_malloc(newbytes);
-+	if (!map->members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		kfree(map);
-+		return -ENOMEM;
-+	}
-+	memset(map->members, 0, newbytes);
-+
-+	set->data = map;
-+	return 0;
-+}
-+
-+static void destroy(struct ip_set *set)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+
-+	ip_set_free(map->members, map->hashsize * sizeof(ip_set_ip_t));
-+	kfree(map);
-+
-+	set->data = NULL;
-+}
-+
-+static void flush(struct ip_set *set)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+	memset(map->members, 0, map->hashsize * sizeof(ip_set_ip_t));
-+}
-+
-+static void list_header(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+	struct ip_set_req_iphash_create *header =
-+	    (struct ip_set_req_iphash_create *) data;
-+
-+	header->hashsize = map->hashsize;
-+	header->probes = map->probes;
-+	header->resize = map->resize;
-+	header->netmask = map->netmask;
-+}
-+
-+static int list_members_size(const struct ip_set *set)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+
-+	return (map->hashsize * sizeof(ip_set_ip_t));
-+}
-+
-+static void list_members(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_iphash *map = (struct ip_set_iphash *) set->data;
-+	int bytes = map->hashsize * sizeof(ip_set_ip_t);
-+
-+	memcpy(data, map->members, bytes);
-+}
-+
-+static struct ip_set_type ip_set_iphash = {
-+	.typename		= SETTYPE_NAME,
-+	.typecode		= IPSET_TYPE_IP,
-+	.protocol_version	= IP_SET_PROTOCOL_VERSION,
-+	.create			= &create,
-+	.destroy		= &destroy,
-+	.flush			= &flush,
-+	.reqsize		= sizeof(struct ip_set_req_iphash),
-+	.addip			= &addip,
-+	.addip_kernel		= &addip_kernel,
-+	.retry			= &retry,
-+	.delip			= &delip,
-+	.delip_kernel		= &delip_kernel,
-+	.testip			= &testip,
-+	.testip_kernel		= &testip_kernel,
-+	.header_size		= sizeof(struct ip_set_req_iphash_create),
-+	.list_header		= &list_header,
-+	.list_members_size	= &list_members_size,
-+	.list_members		= &list_members,
-+	.me			= THIS_MODULE,
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("iphash type of IP sets");
-+
-+static int __init init(void)
-+{
-+	init_max_malloc_size();
-+	return ip_set_register_set_type(&ip_set_iphash);
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* FIXME: possible race with ip_set_create() */
-+	ip_set_unregister_set_type(&ip_set_iphash);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ip_set_ipmap.c linux-2.6.16-owrt/net/ipv4/netfilter/ip_set_ipmap.c
---- linux-2.6.16/net/ipv4/netfilter/ip_set_ipmap.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ip_set_ipmap.c	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,313 @@
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ *                         Patrick Schaaf <bof@bof.de>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module implementing an IP set type: the single bitmap type */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <linux/spinlock.h>
-+
-+#include <linux/netfilter_ipv4/ip_set_ipmap.h>
-+
-+static inline ip_set_ip_t
-+ip_to_id(const struct ip_set_ipmap *map, ip_set_ip_t ip)
-+{
-+	return (ip - map->first_ip)/map->hosts;
-+}
-+
-+static inline int
-+__testip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+	
-+	if (ip < map->first_ip || ip > map->last_ip)
-+		return -ERANGE;
-+
-+	*hash_ip = ip & map->netmask;
-+	DP("set: %s, ip:%u.%u.%u.%u, %u.%u.%u.%u",
-+	   set->name, HIPQUAD(ip), HIPQUAD(*hash_ip));
-+	return !!test_bit(ip_to_id(map, *hash_ip), map->members);
-+}
-+
-+static int
-+testip(struct ip_set *set, const void *data, size_t size,
-+       ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_ipmap *req = 
-+	    (struct ip_set_req_ipmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_ipmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_ipmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __testip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+testip_kernel(struct ip_set *set, 
-+	      const struct sk_buff *skb,
-+	      u_int32_t flags,
-+	      ip_set_ip_t *hash_ip)
-+{
-+	int res;
-+	
-+	DP("flag: %s src: %u.%u.%u.%u dst: %u.%u.%u.%u",
-+	   flags & IPSET_SRC ? "SRC" : "DST",
-+	   NIPQUAD(skb->nh.iph->saddr),
-+	   NIPQUAD(skb->nh.iph->daddr));
-+
-+	res =  __testip(set,
-+			ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+						: skb->nh.iph->daddr),
-+			hash_ip);
-+	return (res < 0 ? 0 : res);
-+}
-+
-+static inline int
-+__addip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+
-+	if (ip < map->first_ip || ip > map->last_ip)
-+		return -ERANGE;
-+
-+	*hash_ip = ip & map->netmask;
-+	DP("%u.%u.%u.%u, %u.%u.%u.%u", HIPQUAD(ip), HIPQUAD(*hash_ip));
-+	if (test_and_set_bit(ip_to_id(map, *hash_ip), map->members))
-+		return -EEXIST;
-+
-+	return 0;
-+}
-+
-+static int
-+addip(struct ip_set *set, const void *data, size_t size,
-+      ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_ipmap *req = 
-+	    (struct ip_set_req_ipmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_ipmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_ipmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	DP("%u.%u.%u.%u", HIPQUAD(req->ip));
-+	return __addip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+addip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __addip(set,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       hash_ip);
-+}
-+
-+static inline int 
-+__delip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+
-+	if (ip < map->first_ip || ip > map->last_ip)
-+		return -ERANGE;
-+
-+	*hash_ip = ip & map->netmask;
-+	DP("%u.%u.%u.%u, %u.%u.%u.%u", HIPQUAD(ip), HIPQUAD(*hash_ip));
-+	if (!test_and_clear_bit(ip_to_id(map, *hash_ip), map->members))
-+		return -EEXIST;
-+	
-+	return 0;
-+}
-+
-+static int
-+delip(struct ip_set *set, const void *data, size_t size,
-+      ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_ipmap *req =
-+	    (struct ip_set_req_ipmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_ipmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_ipmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __delip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+delip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __delip(set,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       hash_ip);
-+}
-+
-+static int create(struct ip_set *set, const void *data, size_t size)
-+{
-+	int newbytes;
-+	struct ip_set_req_ipmap_create *req =
-+	    (struct ip_set_req_ipmap_create *) data;
-+	struct ip_set_ipmap *map;
-+
-+	if (size != sizeof(struct ip_set_req_ipmap_create)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_ipmap_create),
-+			      size);
-+		return -EINVAL;
-+	}
-+
-+	DP("from %u.%u.%u.%u to %u.%u.%u.%u",
-+	   HIPQUAD(req->from), HIPQUAD(req->to));
-+
-+	if (req->from > req->to) {
-+		DP("bad ip range");
-+		return -ENOEXEC;
-+	}
-+
-+	if (req->to - req->from > MAX_RANGE) {
-+		ip_set_printk("range too big (max %d addresses)",
-+			       MAX_RANGE);
-+		return -ENOEXEC;
-+	}
-+
-+	map = kmalloc(sizeof(struct ip_set_ipmap), GFP_KERNEL);
-+	if (!map) {
-+		DP("out of memory for %d bytes",
-+		   sizeof(struct ip_set_ipmap));
-+		return -ENOMEM;
-+	}
-+	map->first_ip = req->from;
-+	map->last_ip = req->to;
-+	map->netmask = req->netmask;
-+
-+	if (req->netmask == 0xFFFFFFFF) {
-+		map->hosts = 1;
-+		map->sizeid = map->last_ip - map->first_ip + 1;
-+	} else {
-+		unsigned int mask_bits, netmask_bits;
-+		ip_set_ip_t mask;
-+		
-+		map->first_ip &= map->netmask;	/* Should we better bark? */
-+		
-+		mask = range_to_mask(map->first_ip, map->last_ip, &mask_bits);
-+		netmask_bits = mask_to_bits(map->netmask);
-+		
-+		if (!mask || netmask_bits <= mask_bits)
-+			return -ENOEXEC;
-+
-+		map->hosts = 2 << (32 - netmask_bits - 1);
-+		map->sizeid = 2 << (netmask_bits - mask_bits - 1);
-+	}
-+	newbytes = bitmap_bytes(0, map->sizeid - 1);
-+	map->members = kmalloc(newbytes, GFP_KERNEL);
-+	if (!map->members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		kfree(map);
-+		return -ENOMEM;
-+	}
-+	memset(map->members, 0, newbytes);
-+	
-+	set->data = map;
-+	return 0;
-+}
-+
-+static void destroy(struct ip_set *set)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+	
-+	kfree(map->members);
-+	kfree(map);
-+	
-+	set->data = NULL;
-+}
-+
-+static void flush(struct ip_set *set)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+	memset(map->members, 0, bitmap_bytes(0, map->sizeid - 1));
-+}
-+
-+static void list_header(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+	struct ip_set_req_ipmap_create *header =
-+	    (struct ip_set_req_ipmap_create *) data;
-+
-+	header->from = map->first_ip;
-+	header->to = map->last_ip;
-+	header->netmask = map->netmask;
-+}
-+
-+static int list_members_size(const struct ip_set *set)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+
-+	return bitmap_bytes(0, map->sizeid - 1);
-+}
-+
-+static void list_members(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data;
-+	int bytes = bitmap_bytes(0, map->sizeid - 1);
-+
-+	memcpy(data, map->members, bytes);
-+}
-+
-+static struct ip_set_type ip_set_ipmap = {
-+	.typename		= SETTYPE_NAME,
-+	.typecode		= IPSET_TYPE_IP,
-+	.protocol_version	= IP_SET_PROTOCOL_VERSION,
-+	.create			= &create,
-+	.destroy		= &destroy,
-+	.flush			= &flush,
-+	.reqsize		= sizeof(struct ip_set_req_ipmap),
-+	.addip			= &addip,
-+	.addip_kernel		= &addip_kernel,
-+	.delip			= &delip,
-+	.delip_kernel		= &delip_kernel,
-+	.testip			= &testip,
-+	.testip_kernel		= &testip_kernel,
-+	.header_size		= sizeof(struct ip_set_req_ipmap_create),
-+	.list_header		= &list_header,
-+	.list_members_size	= &list_members_size,
-+	.list_members		= &list_members,
-+	.me			= THIS_MODULE,
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("ipmap type of IP sets");
-+
-+static int __init init(void)
-+{
-+	return ip_set_register_set_type(&ip_set_ipmap);
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* FIXME: possible race with ip_set_create() */
-+	ip_set_unregister_set_type(&ip_set_ipmap);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ip_set_iptree.c linux-2.6.16-owrt/net/ipv4/netfilter/ip_set_iptree.c
---- linux-2.6.16/net/ipv4/netfilter/ip_set_iptree.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ip_set_iptree.c	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,510 @@
-+/* Copyright (C) 2005 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module implementing an IP set type: the iptree type */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <linux/spinlock.h>
-+
-+#include <linux/netfilter_ipv4/ip_set_iptree.h>
-+
-+/* Garbage collection interval in seconds: */
-+#define IPTREE_GC_TIME		5*60
-+/* Sleep so many milliseconds before trying again 
-+ * to delete the gc timer at destroying a set */ 
-+#define IPTREE_DESTROY_SLEEP	100
-+
-+static kmem_cache_t *branch_cachep;
-+static kmem_cache_t *leaf_cachep;
-+
-+#define ABCD(a,b,c,d,addrp) do {		\
-+	a = ((unsigned char *)addrp)[3];	\
-+	b = ((unsigned char *)addrp)[2];	\
-+	c = ((unsigned char *)addrp)[1];	\
-+	d = ((unsigned char *)addrp)[0];	\
-+} while (0)
-+
-+#define TESTIP_WALK(map, elem, branch) do {	\
-+	if ((map)->tree[elem]) {		\
-+		branch = (map)->tree[elem];	\
-+	} else 					\
-+		return 0;			\
-+} while (0)
-+
-+static inline int
-+__testip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned char a,b,c,d;
-+	
-+	*hash_ip = ip;
-+	ABCD(a, b, c, d, hash_ip);
-+	DP("%u %u %u %u timeout %u", a, b, c, d, map->timeout);
-+	TESTIP_WALK(map, a, btree);
-+	TESTIP_WALK(btree, b, ctree);
-+	TESTIP_WALK(ctree, c, dtree);
-+	DP("%lu %lu", dtree->expires[d], jiffies);
-+	return !!(map->timeout ? (time_after(dtree->expires[d], jiffies))
-+			       : dtree->expires[d]);
-+}
-+
-+static int
-+testip(struct ip_set *set, const void *data, size_t size,
-+       ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_iptree *req = 
-+	    (struct ip_set_req_iptree *) data;
-+
-+	if (size != sizeof(struct ip_set_req_iptree)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iptree),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __testip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+testip_kernel(struct ip_set *set, 
-+	      const struct sk_buff *skb,
-+	      u_int32_t flags,
-+	      ip_set_ip_t *hash_ip)
-+{
-+	int res;
-+	
-+	DP("flag: %s src: %u.%u.%u.%u dst: %u.%u.%u.%u",
-+	   flags & IPSET_SRC ? "SRC" : "DST",
-+	   NIPQUAD(skb->nh.iph->saddr),
-+	   NIPQUAD(skb->nh.iph->daddr));
-+
-+	res =  __testip(set,
-+			ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+						: skb->nh.iph->daddr),
-+			hash_ip);
-+	return (res < 0 ? 0 : res);
-+}
-+
-+#define ADDIP_WALK(map, elem, branch, type, cachep) do {	\
-+	if ((map)->tree[elem]) {				\
-+		DP("found %u", elem);				\
-+		branch = (map)->tree[elem];			\
-+	} else {						\
-+		branch = (type *)				\
-+			kmem_cache_alloc(cachep, GFP_KERNEL);	\
-+		if (branch == NULL)				\
-+			return -ENOMEM;				\
-+		memset(branch, 0, sizeof(*branch));		\
-+		(map)->tree[elem] = branch;			\
-+		DP("alloc %u", elem);				\
-+	}							\
-+} while (0)	
-+
-+static inline int
-+__addip(struct ip_set *set, ip_set_ip_t ip, unsigned int timeout,
-+	ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned char a,b,c,d;
-+	int ret = 0;
-+	
-+	*hash_ip = ip;
-+	ABCD(a, b, c, d, hash_ip);
-+	DP("%u %u %u %u timeout %u", a, b, c, d, timeout);
-+	ADDIP_WALK(map, a, btree, struct ip_set_iptreeb, branch_cachep);
-+	ADDIP_WALK(btree, b, ctree, struct ip_set_iptreec, branch_cachep);
-+	ADDIP_WALK(ctree, c, dtree, struct ip_set_iptreed, leaf_cachep);
-+	if (dtree->expires[d]
-+	    && (!map->timeout || time_after(dtree->expires[d], jiffies)))
-+	    	ret = -EEXIST;
-+	dtree->expires[d] = map->timeout ? (timeout * HZ + jiffies) : 1;
-+	DP("%u %lu", d, dtree->expires[d]);
-+	return ret;
-+}
-+
-+static int
-+addip(struct ip_set *set, const void *data, size_t size,
-+      ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_req_iptree *req = 
-+		(struct ip_set_req_iptree *) data;
-+
-+	if (size != sizeof(struct ip_set_req_iptree)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iptree),
-+			      size);
-+		return -EINVAL;
-+	}
-+	DP("%u.%u.%u.%u %u", HIPQUAD(req->ip), req->timeout);
-+	return __addip(set, req->ip,
-+		       req->timeout ? req->timeout : map->timeout,
-+		       hash_ip);
-+}
-+
-+static int
-+addip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+
-+	return __addip(set,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       map->timeout,
-+		       hash_ip);
-+}
-+
-+#define DELIP_WALK(map, elem, branch) do {	\
-+	if ((map)->tree[elem]) {		\
-+		branch = (map)->tree[elem];	\
-+	} else 					\
-+		return -EEXIST;			\
-+} while (0)
-+
-+static inline int 
-+__delip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned char a,b,c,d;
-+	
-+	*hash_ip = ip;
-+	ABCD(a, b, c, d, hash_ip);
-+	DELIP_WALK(map, a, btree);
-+	DELIP_WALK(btree, b, ctree);
-+	DELIP_WALK(ctree, c, dtree);
-+
-+	if (dtree->expires[d]) {
-+		dtree->expires[d] = 0;
-+		return 0;
-+	}
-+	return -EEXIST;
-+}
-+
-+static int
-+delip(struct ip_set *set, const void *data, size_t size,
-+      ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_iptree *req =
-+	    (struct ip_set_req_iptree *) data;
-+
-+	if (size != sizeof(struct ip_set_req_iptree)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iptree),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __delip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+delip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __delip(set,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       hash_ip);
-+}
-+
-+#define LOOP_WALK_BEGIN(map, i, branch) \
-+	for (i = 0; i < 255; i++) {	\
-+		if (!(map)->tree[i])	\
-+			continue;	\
-+		branch = (map)->tree[i]
-+
-+#define LOOP_WALK_END }
-+
-+static void ip_tree_gc(unsigned long ul_set)
-+{
-+	struct ip_set *set = (void *) ul_set;
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned char a,b,c,d;
-+	unsigned char i,j,k;
-+
-+	i = j = k = 0;
-+	DP("gc: %s", set->name);
-+	write_lock_bh(&set->lock);
-+	LOOP_WALK_BEGIN(map, a, btree);
-+	LOOP_WALK_BEGIN(btree, b, ctree);
-+	LOOP_WALK_BEGIN(ctree, c, dtree);
-+	for (d = 0; d < 255; d++) {
-+		if (dtree->expires[d]) {
-+			DP("gc: %u %u %u %u: expires %lu jiffies %lu",
-+			    a, b, c, d,
-+			    dtree->expires[d], jiffies);
-+			if (map->timeout
-+			    && time_before(dtree->expires[d], jiffies))
-+			    	dtree->expires[d] = 0;
-+			else
-+				k = 1;
-+		}
-+	}
-+	if (k == 0) {
-+		DP("gc: %s: leaf %u %u %u empty",
-+		    set->name, a, b, c);
-+		kmem_cache_free(leaf_cachep, dtree);
-+		ctree->tree[c] = NULL;
-+	} else {
-+		DP("gc: %s: leaf %u %u %u not empty",
-+		    set->name, a, b, c);
-+		j = 1;
-+		k = 0;
-+	}
-+	LOOP_WALK_END;
-+	if (j == 0) {
-+		DP("gc: %s: branch %u %u empty",
-+		    set->name, a, b);
-+		kmem_cache_free(branch_cachep, ctree);
-+		btree->tree[b] = NULL;
-+	} else {
-+		DP("gc: %s: branch %u %u not empty",
-+		    set->name, a, b);
-+		i = 1;
-+		j = k = 0;
-+	}
-+	LOOP_WALK_END;
-+	if (i == 0) {
-+		DP("gc: %s: branch %u empty",
-+		    set->name, a);
-+		kmem_cache_free(branch_cachep, btree);
-+		map->tree[a] = NULL;
-+	} else {
-+		DP("gc: %s: branch %u not empty",
-+		    set->name, a);
-+		i = j = k = 0;
-+	}
-+	LOOP_WALK_END;
-+	write_unlock_bh(&set->lock);
-+	
-+	map->gc.expires = jiffies + map->gc_interval * HZ;
-+	add_timer(&map->gc);
-+}
-+
-+static int create(struct ip_set *set, const void *data, size_t size)
-+{
-+	struct ip_set_req_iptree_create *req =
-+	    (struct ip_set_req_iptree_create *) data;
-+	struct ip_set_iptree *map;
-+
-+	if (size != sizeof(struct ip_set_req_iptree_create)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_iptree_create),
-+			      size);
-+		return -EINVAL;
-+	}
-+
-+	map = kmalloc(sizeof(struct ip_set_iptree), GFP_KERNEL);
-+	if (!map) {
-+		DP("out of memory for %d bytes",
-+		   sizeof(struct ip_set_iptree));
-+		return -ENOMEM;
-+	}
-+	memset(map, 0, sizeof(*map));
-+	map->timeout = req->timeout;
-+	set->data = map;
-+
-+	/* If there is no timeout for the entries,
-+	 * we still have to call gc because delete
-+	 * do not clean up empty branches */
-+	map->gc_interval = IPTREE_GC_TIME;
-+	init_timer(&map->gc);
-+	map->gc.data = (unsigned long) set;
-+	map->gc.function = ip_tree_gc;
-+	map->gc.expires = jiffies + map->gc_interval * HZ;
-+	add_timer(&map->gc);
-+	
-+	return 0;
-+}
-+
-+static void __flush(struct ip_set_iptree *map)
-+{
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned int a,b,c;
-+
-+	LOOP_WALK_BEGIN(map, a, btree);
-+	LOOP_WALK_BEGIN(btree, b, ctree);
-+	LOOP_WALK_BEGIN(ctree, c, dtree);
-+	kmem_cache_free(leaf_cachep, dtree);
-+	LOOP_WALK_END;
-+	kmem_cache_free(branch_cachep, ctree);
-+	LOOP_WALK_END;
-+	kmem_cache_free(branch_cachep, btree);
-+	LOOP_WALK_END;
-+}
-+
-+static void destroy(struct ip_set *set)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+
-+	while (!del_timer(&map->gc))
-+		msleep(IPTREE_DESTROY_SLEEP);
-+	__flush(map);
-+	kfree(map);
-+	set->data = NULL;
-+}
-+
-+static void flush(struct ip_set *set)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	unsigned int timeout = map->timeout;
-+	
-+	__flush(map);
-+	memset(map, 0, sizeof(*map));
-+	map->timeout = timeout;
-+}
-+
-+static void list_header(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_req_iptree_create *header =
-+	    (struct ip_set_req_iptree_create *) data;
-+
-+	header->timeout = map->timeout;
-+}
-+
-+static int list_members_size(const struct ip_set *set)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned char a,b,c,d;
-+	unsigned int count = 0;
-+
-+	LOOP_WALK_BEGIN(map, a, btree);
-+	LOOP_WALK_BEGIN(btree, b, ctree);
-+	LOOP_WALK_BEGIN(ctree, c, dtree);
-+	for (d = 0; d < 255; d++) {
-+		if (dtree->expires[d]
-+		    && (!map->timeout || time_after(dtree->expires[d], jiffies)))
-+		    	count++;
-+	}
-+	LOOP_WALK_END;
-+	LOOP_WALK_END;
-+	LOOP_WALK_END;
-+
-+	DP("members %u", count);
-+	return (count * sizeof(struct ip_set_req_iptree));
-+}
-+
-+static void list_members(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_iptree *map = (struct ip_set_iptree *) set->data;
-+	struct ip_set_iptreeb *btree;
-+	struct ip_set_iptreec *ctree;
-+	struct ip_set_iptreed *dtree;
-+	unsigned char a,b,c,d;
-+	size_t offset = 0;
-+	struct ip_set_req_iptree *entry;
-+
-+	LOOP_WALK_BEGIN(map, a, btree);
-+	LOOP_WALK_BEGIN(btree, b, ctree);
-+	LOOP_WALK_BEGIN(ctree, c, dtree);
-+	for (d = 0; d < 255; d++) {
-+		if (dtree->expires[d]
-+		    && (!map->timeout || time_after(dtree->expires[d], jiffies))) {
-+		    	entry = (struct ip_set_req_iptree *)(data + offset);
-+		    	entry->ip = ((a << 24) | (b << 16) | (c << 8) | d);
-+		    	entry->timeout = !map->timeout ? 0 
-+				: (dtree->expires[d] - jiffies)/HZ;
-+			offset += sizeof(struct ip_set_req_iptree);
-+		}
-+	}
-+	LOOP_WALK_END;
-+	LOOP_WALK_END;
-+	LOOP_WALK_END;
-+}
-+
-+static struct ip_set_type ip_set_iptree = {
-+	.typename		= SETTYPE_NAME,
-+	.typecode		= IPSET_TYPE_IP,
-+	.protocol_version	= IP_SET_PROTOCOL_VERSION,
-+	.create			= &create,
-+	.destroy		= &destroy,
-+	.flush			= &flush,
-+	.reqsize		= sizeof(struct ip_set_req_iptree),
-+	.addip			= &addip,
-+	.addip_kernel		= &addip_kernel,
-+	.delip			= &delip,
-+	.delip_kernel		= &delip_kernel,
-+	.testip			= &testip,
-+	.testip_kernel		= &testip_kernel,
-+	.header_size		= sizeof(struct ip_set_req_iptree_create),
-+	.list_header		= &list_header,
-+	.list_members_size	= &list_members_size,
-+	.list_members		= &list_members,
-+	.me			= THIS_MODULE,
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("iptree type of IP sets");
-+
-+static int __init init(void)
-+{
-+	int ret;
-+	
-+	branch_cachep = kmem_cache_create("ip_set_iptreeb",
-+				sizeof(struct ip_set_iptreeb),
-+				0, 0, NULL, NULL);
-+	if (!branch_cachep) {
-+		printk(KERN_ERR "Unable to create ip_set_iptreeb slab cache\n");
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+	leaf_cachep = kmem_cache_create("ip_set_iptreed",
-+				sizeof(struct ip_set_iptreed),
-+				0, 0, NULL, NULL);
-+	if (!leaf_cachep) {
-+		printk(KERN_ERR "Unable to create ip_set_iptreed slab cache\n");
-+		ret = -ENOMEM;
-+		goto free_branch;
-+	}
-+	ret = ip_set_register_set_type(&ip_set_iptree);
-+	if (ret == 0)
-+		goto out;
-+
-+	kmem_cache_destroy(leaf_cachep);
-+    free_branch:	
-+	kmem_cache_destroy(branch_cachep);
-+    out:
-+	return ret;
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* FIXME: possible race with ip_set_create() */
-+	ip_set_unregister_set_type(&ip_set_iptree);
-+	kmem_cache_destroy(leaf_cachep);
-+	kmem_cache_destroy(branch_cachep);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ip_set_macipmap.c linux-2.6.16-owrt/net/ipv4/netfilter/ip_set_macipmap.c
---- linux-2.6.16/net/ipv4/netfilter/ip_set_macipmap.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ip_set_macipmap.c	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,338 @@
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ *                         Patrick Schaaf <bof@bof.de>
-+ *                         Martin Josefsson <gandalf@wlug.westbo.se>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module implementing an IP set type: the macipmap type */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <linux/spinlock.h>
-+#include <linux/if_ether.h>
-+#include <linux/vmalloc.h>
-+
-+#include <linux/netfilter_ipv4/ip_set_malloc.h>
-+#include <linux/netfilter_ipv4/ip_set_macipmap.h>
-+
-+static int
-+testip(struct ip_set *set, const void *data, size_t size, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_macipmap *map = (struct ip_set_macipmap *) set->data;
-+	struct ip_set_macip *table = (struct ip_set_macip *) map->members;	
-+	struct ip_set_req_macipmap *req = (struct ip_set_req_macipmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_macipmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_macipmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+
-+	if (req->ip < map->first_ip || req->ip > map->last_ip)
-+		return -ERANGE;
-+
-+	*hash_ip = req->ip;
-+	DP("set: %s, ip:%u.%u.%u.%u, %u.%u.%u.%u",
-+	   set->name, HIPQUAD(req->ip), HIPQUAD(*hash_ip));		
-+	if (test_bit(IPSET_MACIP_ISSET,
-+		     (void *) &table[req->ip - map->first_ip].flags)) {
-+		return (memcmp(req->ethernet,
-+			       &table[req->ip - map->first_ip].ethernet,
-+			       ETH_ALEN) == 0);
-+	} else {
-+		return (map->flags & IPSET_MACIP_MATCHUNSET ? 1 : 0);
-+	}
-+}
-+
-+static int
-+testip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	      u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+	struct ip_set_macip *table =
-+	    (struct ip_set_macip *) map->members;
-+	ip_set_ip_t ip;
-+	
-+	ip = ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr
-+				     : skb->nh.iph->daddr);
-+	DP("flag: %s src: %u.%u.%u.%u dst: %u.%u.%u.%u",
-+	   flags & IPSET_SRC ? "SRC" : "DST",
-+	   NIPQUAD(skb->nh.iph->saddr),
-+	   NIPQUAD(skb->nh.iph->daddr));
-+
-+	if (ip < map->first_ip || ip > map->last_ip)
-+		return 0;
-+
-+	*hash_ip = ip;	
-+	DP("set: %s, ip:%u.%u.%u.%u, %u.%u.%u.%u",
-+	   set->name, HIPQUAD(ip), HIPQUAD(*hash_ip));		
-+	if (test_bit(IPSET_MACIP_ISSET,
-+	    (void *) &table[ip - map->first_ip].flags)) {
-+		/* Is mac pointer valid?
-+		 * If so, compare... */
-+		return (skb->mac.raw >= skb->head
-+			&& (skb->mac.raw + ETH_HLEN) <= skb->data
-+			&& (memcmp(eth_hdr(skb)->h_source,
-+				   &table[ip - map->first_ip].ethernet,
-+				   ETH_ALEN) == 0));
-+	} else {
-+		return (map->flags & IPSET_MACIP_MATCHUNSET ? 1 : 0);
-+	}
-+}
-+
-+/* returns 0 on success */
-+static inline int
-+__addip(struct ip_set *set, 
-+	ip_set_ip_t ip, unsigned char *ethernet, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+	struct ip_set_macip *table =
-+	    (struct ip_set_macip *) map->members;
-+
-+	if (ip < map->first_ip || ip > map->last_ip)
-+		return -ERANGE;
-+	if (test_and_set_bit(IPSET_MACIP_ISSET, 
-+			     (void *) &table[ip - map->first_ip].flags))
-+		return -EEXIST;
-+
-+	*hash_ip = ip;
-+	DP("%u.%u.%u.%u, %u.%u.%u.%u", HIPQUAD(ip), HIPQUAD(*hash_ip));
-+	memcpy(&table[ip - map->first_ip].ethernet, ethernet, ETH_ALEN);
-+	return 0;
-+}
-+
-+static int
-+addip(struct ip_set *set, const void *data, size_t size,
-+      ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_macipmap *req =
-+	    (struct ip_set_req_macipmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_macipmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_macipmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __addip(set, req->ip, req->ethernet, hash_ip);
-+}
-+
-+static int
-+addip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	ip_set_ip_t ip;
-+	
-+	ip = ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr
-+				     : skb->nh.iph->daddr);
-+
-+	if (!(skb->mac.raw >= skb->head
-+	      && (skb->mac.raw + ETH_HLEN) <= skb->data))
-+		return -EINVAL;
-+
-+	return __addip(set, ip, eth_hdr(skb)->h_source, hash_ip);
-+}
-+
-+static inline int
-+__delip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+	struct ip_set_macip *table =
-+	    (struct ip_set_macip *) map->members;
-+
-+	if (ip < map->first_ip || ip > map->last_ip)
-+		return -ERANGE;
-+	if (!test_and_clear_bit(IPSET_MACIP_ISSET, 
-+				(void *)&table[ip - map->first_ip].flags))
-+		return -EEXIST;
-+
-+	*hash_ip = ip;
-+	DP("%u.%u.%u.%u, %u.%u.%u.%u", HIPQUAD(ip), HIPQUAD(*hash_ip));
-+	return 0;
-+}
-+
-+static int
-+delip(struct ip_set *set, const void *data, size_t size,
-+     ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_macipmap *req =
-+	    (struct ip_set_req_macipmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_macipmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_macipmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __delip(set, req->ip, hash_ip);
-+}
-+
-+static int
-+delip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __delip(set,
-+		       ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+					       : skb->nh.iph->daddr),
-+		       hash_ip);
-+}
-+
-+static inline size_t members_size(ip_set_id_t from, ip_set_id_t to)
-+{
-+	return (size_t)((to - from + 1) * sizeof(struct ip_set_macip));
-+}
-+
-+static int create(struct ip_set *set, const void *data, size_t size)
-+{
-+	int newbytes;
-+	struct ip_set_req_macipmap_create *req =
-+	    (struct ip_set_req_macipmap_create *) data;
-+	struct ip_set_macipmap *map;
-+
-+	if (size != sizeof(struct ip_set_req_macipmap_create)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_macipmap_create),
-+			      size);
-+		return -EINVAL;
-+	}
-+
-+	DP("from %u.%u.%u.%u to %u.%u.%u.%u",
-+	   HIPQUAD(req->from), HIPQUAD(req->to));
-+
-+	if (req->from > req->to) {
-+		DP("bad ip range");
-+		return -ENOEXEC;
-+	}
-+
-+	if (req->to - req->from > MAX_RANGE) {
-+		ip_set_printk("range too big (max %d addresses)",
-+			       MAX_RANGE);
-+		return -ENOEXEC;
-+	}
-+
-+	map = kmalloc(sizeof(struct ip_set_macipmap), GFP_KERNEL);
-+	if (!map) {
-+		DP("out of memory for %d bytes",
-+		   sizeof(struct ip_set_macipmap));
-+		return -ENOMEM;
-+	}
-+	map->flags = req->flags;
-+	map->first_ip = req->from;
-+	map->last_ip = req->to;
-+	newbytes = members_size(map->first_ip, map->last_ip);
-+	map->members = ip_set_malloc(newbytes);
-+	if (!map->members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		kfree(map);
-+		return -ENOMEM;
-+	}
-+	memset(map->members, 0, newbytes);
-+	
-+	set->data = map;
-+	return 0;
-+}
-+
-+static void destroy(struct ip_set *set)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+
-+	ip_set_free(map->members, members_size(map->first_ip, map->last_ip));
-+	kfree(map);
-+
-+	set->data = NULL;
-+}
-+
-+static void flush(struct ip_set *set)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+	memset(map->members, 0, members_size(map->first_ip, map->last_ip));
-+}
-+
-+static void list_header(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+	struct ip_set_req_macipmap_create *header =
-+	    (struct ip_set_req_macipmap_create *) data;
-+
-+	DP("list_header %x %x %u", map->first_ip, map->last_ip,
-+	   map->flags);
-+
-+	header->from = map->first_ip;
-+	header->to = map->last_ip;
-+	header->flags = map->flags;
-+}
-+
-+static int list_members_size(const struct ip_set *set)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+
-+	return members_size(map->first_ip, map->last_ip);
-+}
-+
-+static void list_members(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_macipmap *map =
-+	    (struct ip_set_macipmap *) set->data;
-+
-+	int bytes = members_size(map->first_ip, map->last_ip);
-+
-+	memcpy(data, map->members, bytes);
-+}
-+
-+static struct ip_set_type ip_set_macipmap = {
-+	.typename		= SETTYPE_NAME,
-+	.typecode		= IPSET_TYPE_IP,
-+	.protocol_version	= IP_SET_PROTOCOL_VERSION,
-+	.create			= &create,
-+	.destroy		= &destroy,
-+	.flush			= &flush,
-+	.reqsize		= sizeof(struct ip_set_req_macipmap),
-+	.addip			= &addip,
-+	.addip_kernel		= &addip_kernel,
-+	.delip			= &delip,
-+	.delip_kernel		= &delip_kernel,
-+	.testip			= &testip,
-+	.testip_kernel		= &testip_kernel,
-+	.header_size		= sizeof(struct ip_set_req_macipmap_create),
-+	.list_header		= &list_header,
-+	.list_members_size	= &list_members_size,
-+	.list_members		= &list_members,
-+	.me			= THIS_MODULE,
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("macipmap type of IP sets");
-+
-+static int __init init(void)
-+{
-+	init_max_malloc_size();
-+	return ip_set_register_set_type(&ip_set_macipmap);
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* FIXME: possible race with ip_set_create() */
-+	ip_set_unregister_set_type(&ip_set_macipmap);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ip_set_nethash.c linux-2.6.16-owrt/net/ipv4/netfilter/ip_set_nethash.c
---- linux-2.6.16/net/ipv4/netfilter/ip_set_nethash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ip_set_nethash.c	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,449 @@
-+/* Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module implementing a cidr nethash set */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <linux/spinlock.h>
-+#include <linux/vmalloc.h>
-+#include <linux/random.h>
-+
-+#include <net/ip.h>
-+
-+#include <linux/netfilter_ipv4/ip_set_malloc.h>
-+#include <linux/netfilter_ipv4/ip_set_nethash.h>
-+#include <linux/netfilter_ipv4/ip_set_jhash.h>
-+#include <linux/netfilter_ipv4/ip_set_prime.h>
-+
-+static inline __u32
-+jhash_ip(const struct ip_set_nethash *map, ip_set_ip_t ip)
-+{
-+	return jhash_1word(ip, map->initval);
-+}
-+
-+static inline __u32
-+randhash_ip(const struct ip_set_nethash *map, ip_set_ip_t ip)
-+{
-+	return (1 + ip % map->prime);
-+}
-+
-+static inline __u32
-+hash_id_cidr(struct ip_set_nethash *map,
-+	     ip_set_ip_t ip,
-+	     unsigned char cidr,
-+	     ip_set_ip_t *hash_ip)
-+{
-+	__u32 jhash, randhash, id;
-+	u_int16_t i;
-+
-+	*hash_ip = pack(ip, cidr);
-+	jhash = jhash_ip(map, *hash_ip);
-+	randhash = randhash_ip(map, *hash_ip);
-+	
-+	for (i = 0; i < map->probes; i++) {
-+		id = (jhash + i * randhash) % map->hashsize;
-+	   	DP("hash key: %u", id);
-+	   	if (map->members[id] == *hash_ip)
-+			return id;
-+	}
-+	return UINT_MAX;
-+}
-+
-+static inline __u32
-+hash_id(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	__u32 id = UINT_MAX;
-+	int i;
-+
-+	for (i = 0; i < 30 && map->cidr[i]; i++) {
-+		id = hash_id_cidr(map, ip, map->cidr[i], hash_ip);
-+		if (id != UINT_MAX)
-+			break;
-+	}
-+	return id;
-+}
-+
-+static inline int
-+__testip_cidr(struct ip_set *set, ip_set_ip_t ip, unsigned char cidr,
-+	      ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+
-+	return (hash_id_cidr(map, ip, cidr, hash_ip) != UINT_MAX);
-+}
-+
-+static inline int
-+__testip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip)
-+{
-+	return (hash_id(set, ip, hash_ip) != UINT_MAX);
-+}
-+
-+static int
-+testip(struct ip_set *set, const void *data, size_t size,
-+       ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_nethash *req = 
-+	    (struct ip_set_req_nethash *) data;
-+
-+	if (size != sizeof(struct ip_set_req_nethash)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_nethash),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return (req->cidr == 32 ? __testip(set, req->ip, hash_ip)
-+		: __testip_cidr(set, req->ip, req->cidr, hash_ip));
-+}
-+
-+static int
-+testip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+		u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	return __testip(set,
-+			ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr 
-+						: skb->nh.iph->daddr),
-+			hash_ip);
-+}
-+
-+static inline int
-+__addip_base(struct ip_set_nethash *map, ip_set_ip_t ip)
-+{
-+	__u32 jhash, randhash, probe;
-+	u_int16_t i;
-+
-+	jhash = jhash_ip(map, ip);
-+	randhash = randhash_ip(map, ip);
-+	
-+	for (i = 0; i < map->probes; i++) {
-+		probe = (jhash + i * randhash) % map->hashsize;
-+		if (map->members[probe] == ip)
-+			return -EEXIST;
-+		if (!map->members[probe]) {
-+			map->members[probe] = ip;
-+			return 0;
-+		}
-+	}
-+	/* Trigger rehashing */
-+	return -EAGAIN;
-+}
-+
-+static inline int
-+__addip(struct ip_set_nethash *map, ip_set_ip_t ip, unsigned char cidr,
-+	ip_set_ip_t *hash_ip)
-+{
-+	*hash_ip = pack(ip, cidr);
-+	DP("%u.%u.%u.%u/%u, %u.%u.%u.%u", HIPQUAD(ip), cidr, HIPQUAD(*hash_ip));
-+	
-+	return __addip_base(map, *hash_ip);
-+}
-+
-+static void
-+update_cidr_sizes(struct ip_set_nethash *map, unsigned char cidr)
-+{
-+	unsigned char next;
-+	int i;
-+	
-+	for (i = 0; i < 30 && map->cidr[i]; i++) {
-+		if (map->cidr[i] == cidr) {
-+			return;
-+		} else if (map->cidr[i] < cidr) {
-+			next = map->cidr[i];
-+			map->cidr[i] = cidr;
-+			cidr = next;
-+		}
-+	}
-+	if (i < 30)
-+		map->cidr[i] = cidr;
-+}
-+
-+static int
-+addip(struct ip_set *set, const void *data, size_t size,
-+        ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_nethash *req = 
-+	    (struct ip_set_req_nethash *) data;
-+	int ret;
-+
-+	if (size != sizeof(struct ip_set_req_nethash)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_nethash),
-+			      size);
-+		return -EINVAL;
-+	}
-+	ret = __addip((struct ip_set_nethash *) set->data, 
-+		      req->ip, req->cidr, hash_ip);
-+	
-+	if (ret == 0)
-+		update_cidr_sizes((struct ip_set_nethash *) set->data,
-+				  req->cidr);
-+	
-+	return ret;
-+}
-+
-+static int
-+addip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	     u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	int ret = -ERANGE;
-+	ip_set_ip_t ip = ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr
-+						 : skb->nh.iph->daddr);
-+	
-+	if (map->cidr[0])
-+		ret = __addip(map, ip, map->cidr[0], hash_ip);
-+		
-+	return ret;
-+}
-+
-+static int retry(struct ip_set *set)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	ip_set_ip_t *members;
-+	u_int32_t i, hashsize;
-+	unsigned newbytes;
-+	int res;
-+	struct ip_set_nethash tmp = {
-+		.hashsize = map->hashsize,
-+		.probes = map->probes,
-+		.resize = map->resize
-+	};
-+	
-+	if (map->resize == 0)
-+		return -ERANGE;
-+
-+	memcpy(tmp.cidr, map->cidr, 30 * sizeof(unsigned char));
-+    again:
-+    	res = 0;
-+    	
-+	/* Calculate new parameters */
-+	get_random_bytes(&tmp.initval, 4);
-+	hashsize = tmp.hashsize + (tmp.hashsize * map->resize)/100;
-+	if (hashsize == tmp.hashsize)
-+		hashsize++;
-+	tmp.prime = make_prime(hashsize);
-+	
-+	ip_set_printk("rehashing of set %s triggered: "
-+		      "hashsize grows from %u to %u",
-+		      set->name, tmp.hashsize, hashsize);
-+	tmp.hashsize = hashsize;
-+	
-+	newbytes = hashsize * sizeof(ip_set_ip_t);
-+	tmp.members = ip_set_malloc_atomic(newbytes);
-+	if (!tmp.members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		return -ENOMEM;
-+	}
-+	memset(tmp.members, 0, newbytes);
-+	
-+	write_lock_bh(&set->lock);
-+	map = (struct ip_set_nethash *) set->data; /* Play safe */
-+	for (i = 0; i < map->hashsize && res == 0; i++) {
-+		if (map->members[i])
-+			res = __addip_base(&tmp, map->members[i]);
-+	}
-+	if (res) {
-+		/* Failure, try again */
-+		write_unlock_bh(&set->lock);
-+		ip_set_free(tmp.members, newbytes);
-+		goto again;
-+	}
-+	
-+	/* Success at resizing! */
-+	members = map->members;
-+	hashsize = map->hashsize;
-+	
-+	map->initval = tmp.initval;
-+	map->prime = tmp.prime;
-+	map->hashsize = tmp.hashsize;
-+	map->members = tmp.members;
-+	write_unlock_bh(&set->lock);
-+
-+	ip_set_free(members, hashsize * sizeof(ip_set_ip_t));
-+
-+	return 0;
-+}
-+
-+static inline int
-+__delip(struct ip_set_nethash *map, ip_set_ip_t ip, unsigned char cidr,
-+	ip_set_ip_t *hash_ip)
-+{
-+	ip_set_ip_t id = hash_id_cidr(map, ip, cidr, hash_ip);
-+
-+	if (id == UINT_MAX)
-+		return -EEXIST;
-+		
-+	map->members[id] = 0;
-+	return 0;
-+}
-+
-+static int
-+delip(struct ip_set *set, const void *data, size_t size,
-+        ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_req_nethash *req =
-+	    (struct ip_set_req_nethash *) data;
-+
-+	if (size != sizeof(struct ip_set_req_nethash)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_nethash),
-+			      size);
-+		return -EINVAL;
-+	}
-+	/* TODO: no garbage collection in map->cidr */		
-+	return __delip((struct ip_set_nethash *) set->data, 
-+		       req->ip, req->cidr, hash_ip);
-+}
-+
-+static int
-+delip_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	       u_int32_t flags, ip_set_ip_t *hash_ip)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	int ret = -ERANGE;
-+	ip_set_ip_t ip = ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr
-+						 : skb->nh.iph->daddr);
-+	
-+	if (map->cidr[0])
-+		ret = __delip(map, ip, map->cidr[0], hash_ip);
-+	
-+	return ret;
-+}
-+
-+static int create(struct ip_set *set, const void *data, size_t size)
-+{
-+	unsigned newbytes;
-+	struct ip_set_req_nethash_create *req =
-+	    (struct ip_set_req_nethash_create *) data;
-+	struct ip_set_nethash *map;
-+
-+	if (size != sizeof(struct ip_set_req_nethash_create)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			       sizeof(struct ip_set_req_nethash_create),
-+			       size);
-+		return -EINVAL;
-+	}
-+
-+	if (req->hashsize < 1) {
-+		ip_set_printk("hashsize too small");
-+		return -ENOEXEC;
-+	}
-+
-+	map = kmalloc(sizeof(struct ip_set_nethash), GFP_KERNEL);
-+	if (!map) {
-+		DP("out of memory for %d bytes",
-+		   sizeof(struct ip_set_nethash));
-+		return -ENOMEM;
-+	}
-+	get_random_bytes(&map->initval, 4);
-+	map->prime = make_prime(req->hashsize);
-+	map->hashsize = req->hashsize;
-+	map->probes = req->probes;
-+	map->resize = req->resize;
-+	memset(map->cidr, 0, 30 * sizeof(unsigned char));
-+	newbytes = map->hashsize * sizeof(ip_set_ip_t);
-+	map->members = ip_set_malloc(newbytes);
-+	if (!map->members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		kfree(map);
-+		return -ENOMEM;
-+	}
-+	memset(map->members, 0, newbytes);
-+
-+	set->data = map;
-+	return 0;
-+}
-+
-+static void destroy(struct ip_set *set)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+
-+	ip_set_free(map->members, map->hashsize * sizeof(ip_set_ip_t));
-+	kfree(map);
-+
-+	set->data = NULL;
-+}
-+
-+static void flush(struct ip_set *set)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	memset(map->members, 0, map->hashsize * sizeof(ip_set_ip_t));
-+	memset(map->cidr, 0, 30 * sizeof(unsigned char));
-+}
-+
-+static void list_header(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	struct ip_set_req_nethash_create *header =
-+	    (struct ip_set_req_nethash_create *) data;
-+
-+	header->hashsize = map->hashsize;
-+	header->probes = map->probes;
-+	header->resize = map->resize;
-+}
-+
-+static int list_members_size(const struct ip_set *set)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+
-+	return (map->hashsize * sizeof(ip_set_ip_t));
-+}
-+
-+static void list_members(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_nethash *map = (struct ip_set_nethash *) set->data;
-+	int bytes = map->hashsize * sizeof(ip_set_ip_t);
-+
-+	memcpy(data, map->members, bytes);
-+}
-+
-+static struct ip_set_type ip_set_nethash = {
-+	.typename		= SETTYPE_NAME,
-+	.typecode		= IPSET_TYPE_IP,
-+	.protocol_version	= IP_SET_PROTOCOL_VERSION,
-+	.create			= &create,
-+	.destroy		= &destroy,
-+	.flush			= &flush,
-+	.reqsize		= sizeof(struct ip_set_req_nethash),
-+	.addip			= &addip,
-+	.addip_kernel		= &addip_kernel,
-+	.retry			= &retry,
-+	.delip			= &delip,
-+	.delip_kernel		= &delip_kernel,
-+	.testip			= &testip,
-+	.testip_kernel		= &testip_kernel,
-+	.header_size		= sizeof(struct ip_set_req_nethash_create),
-+	.list_header		= &list_header,
-+	.list_members_size	= &list_members_size,
-+	.list_members		= &list_members,
-+	.me			= THIS_MODULE,
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("nethash type of IP sets");
-+
-+static int __init init(void)
-+{
-+	return ip_set_register_set_type(&ip_set_nethash);
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* FIXME: possible race with ip_set_create() */
-+	ip_set_unregister_set_type(&ip_set_nethash);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ip_set_portmap.c linux-2.6.16-owrt/net/ipv4/netfilter/ip_set_portmap.c
---- linux-2.6.16/net/ipv4/netfilter/ip_set_portmap.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ip_set_portmap.c	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,325 @@
-+/* Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module implementing a port set type as a bitmap */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <linux/udp.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <linux/spinlock.h>
-+
-+#include <net/ip.h>
-+
-+#include <linux/netfilter_ipv4/ip_set_portmap.h>
-+
-+/* We must handle non-linear skbs */
-+static inline ip_set_ip_t
-+get_port(const struct sk_buff *skb, u_int32_t flags)
-+{
-+	struct iphdr *iph = skb->nh.iph;
-+	u_int16_t offset = ntohs(iph->frag_off) & IP_OFFSET;
-+
-+	switch (iph->protocol) {
-+	case IPPROTO_TCP: {
-+		struct tcphdr tcph;
-+		
-+		/* See comments at tcp_match in ip_tables.c */
-+		if (offset)
-+			return INVALID_PORT;
-+
-+		if (skb_copy_bits(skb, skb->nh.iph->ihl*4, &tcph, sizeof(tcph)) < 0)
-+			/* No choice either */
-+			return INVALID_PORT;
-+	     	
-+	     	return ntohs(flags & IPSET_SRC ?
-+			     tcph.source : tcph.dest);
-+	    }
-+	case IPPROTO_UDP: {
-+		struct udphdr udph;
-+
-+		if (offset)
-+			return INVALID_PORT;
-+
-+		if (skb_copy_bits(skb, skb->nh.iph->ihl*4, &udph, sizeof(udph)) < 0)
-+			/* No choice either */
-+			return INVALID_PORT;
-+	     	
-+	     	return ntohs(flags & IPSET_SRC ?
-+			     udph.source : udph.dest);
-+	    }
-+	default:
-+		return INVALID_PORT;
-+	}
-+}
-+
-+static inline int
-+__testport(struct ip_set *set, ip_set_ip_t port, ip_set_ip_t *hash_port)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+
-+	if (port < map->first_port || port > map->last_port)
-+		return -ERANGE;
-+		
-+	*hash_port = port;
-+	DP("set: %s, port:%u, %u", set->name, port, *hash_port);
-+	return !!test_bit(port - map->first_port, map->members);
-+}
-+
-+static int
-+testport(struct ip_set *set, const void *data, size_t size,
-+         ip_set_ip_t *hash_port)
-+{
-+	struct ip_set_req_portmap *req = 
-+	    (struct ip_set_req_portmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_portmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_portmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __testport(set, req->port, hash_port);
-+}
-+
-+static int
-+testport_kernel(struct ip_set *set, const struct sk_buff *skb,
-+		u_int32_t flags, ip_set_ip_t *hash_port)
-+{
-+	int res;
-+	ip_set_ip_t port = get_port(skb, flags);
-+
-+	DP("flag %s port %u", flags & IPSET_SRC ? "SRC" : "DST", port);	
-+	if (port == INVALID_PORT)
-+		return 0;	
-+
-+	res =  __testport(set, port, hash_port);
-+	
-+	return (res < 0 ? 0 : res);
-+}
-+
-+static inline int
-+__addport(struct ip_set *set, ip_set_ip_t port, ip_set_ip_t *hash_port)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+
-+	if (port < map->first_port || port > map->last_port)
-+		return -ERANGE;
-+	if (test_and_set_bit(port - map->first_port, map->members))
-+		return -EEXIST;
-+		
-+	*hash_port = port;
-+	DP("port %u", port);
-+	return 0;
-+}
-+
-+static int
-+addport(struct ip_set *set, const void *data, size_t size,
-+        ip_set_ip_t *hash_port)
-+{
-+	struct ip_set_req_portmap *req = 
-+	    (struct ip_set_req_portmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_portmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_portmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __addport(set, req->port, hash_port);
-+}
-+
-+static int
-+addport_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	       u_int32_t flags, ip_set_ip_t *hash_port)
-+{
-+	ip_set_ip_t port = get_port(skb, flags);
-+	
-+	if (port == INVALID_PORT)
-+		return -EINVAL;
-+
-+	return __addport(set, port, hash_port);
-+}
-+
-+static inline int
-+__delport(struct ip_set *set, ip_set_ip_t port, ip_set_ip_t *hash_port)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+
-+	if (port < map->first_port || port > map->last_port)
-+		return -ERANGE;
-+	if (!test_and_clear_bit(port - map->first_port, map->members))
-+		return -EEXIST;
-+		
-+	*hash_port = port;
-+	DP("port %u", port);
-+	return 0;
-+}
-+
-+static int
-+delport(struct ip_set *set, const void *data, size_t size,
-+        ip_set_ip_t *hash_port)
-+{
-+	struct ip_set_req_portmap *req =
-+	    (struct ip_set_req_portmap *) data;
-+
-+	if (size != sizeof(struct ip_set_req_portmap)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			      sizeof(struct ip_set_req_portmap),
-+			      size);
-+		return -EINVAL;
-+	}
-+	return __delport(set, req->port, hash_port);
-+}
-+
-+static int
-+delport_kernel(struct ip_set *set, const struct sk_buff *skb,
-+	       u_int32_t flags, ip_set_ip_t *hash_port)
-+{
-+	ip_set_ip_t port = get_port(skb, flags);
-+	
-+	if (port == INVALID_PORT)
-+		return -EINVAL;
-+
-+	return __delport(set, port, hash_port);
-+}
-+
-+static int create(struct ip_set *set, const void *data, size_t size)
-+{
-+	int newbytes;
-+	struct ip_set_req_portmap_create *req =
-+	    (struct ip_set_req_portmap_create *) data;
-+	struct ip_set_portmap *map;
-+
-+	if (size != sizeof(struct ip_set_req_portmap_create)) {
-+		ip_set_printk("data length wrong (want %zu, have %zu)",
-+			       sizeof(struct ip_set_req_portmap_create),
-+			       size);
-+		return -EINVAL;
-+	}
-+
-+	DP("from %u to %u", req->from, req->to);
-+
-+	if (req->from > req->to) {
-+		DP("bad port range");
-+		return -ENOEXEC;
-+	}
-+
-+	if (req->to - req->from > MAX_RANGE) {
-+		ip_set_printk("range too big (max %d ports)",
-+			       MAX_RANGE);
-+		return -ENOEXEC;
-+	}
-+
-+	map = kmalloc(sizeof(struct ip_set_portmap), GFP_KERNEL);
-+	if (!map) {
-+		DP("out of memory for %d bytes",
-+		   sizeof(struct ip_set_portmap));
-+		return -ENOMEM;
-+	}
-+	map->first_port = req->from;
-+	map->last_port = req->to;
-+	newbytes = bitmap_bytes(req->from, req->to);
-+	map->members = kmalloc(newbytes, GFP_KERNEL);
-+	if (!map->members) {
-+		DP("out of memory for %d bytes", newbytes);
-+		kfree(map);
-+		return -ENOMEM;
-+	}
-+	memset(map->members, 0, newbytes);
-+
-+	set->data = map;
-+	return 0;
-+}
-+
-+static void destroy(struct ip_set *set)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+
-+	kfree(map->members);
-+	kfree(map);
-+
-+	set->data = NULL;
-+}
-+
-+static void flush(struct ip_set *set)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+	memset(map->members, 0, bitmap_bytes(map->first_port, map->last_port));
-+}
-+
-+static void list_header(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+	struct ip_set_req_portmap_create *header =
-+	    (struct ip_set_req_portmap_create *) data;
-+
-+	DP("list_header %u %u", map->first_port, map->last_port);
-+
-+	header->from = map->first_port;
-+	header->to = map->last_port;
-+}
-+
-+static int list_members_size(const struct ip_set *set)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+
-+	return bitmap_bytes(map->first_port, map->last_port);
-+}
-+
-+static void list_members(const struct ip_set *set, void *data)
-+{
-+	struct ip_set_portmap *map = (struct ip_set_portmap *) set->data;
-+	int bytes = bitmap_bytes(map->first_port, map->last_port);
-+
-+	memcpy(data, map->members, bytes);
-+}
-+
-+static struct ip_set_type ip_set_portmap = {
-+	.typename		= SETTYPE_NAME,
-+	.typecode		= IPSET_TYPE_PORT,
-+	.protocol_version	= IP_SET_PROTOCOL_VERSION,
-+	.create			= &create,
-+	.destroy		= &destroy,
-+	.flush			= &flush,
-+	.reqsize		= sizeof(struct ip_set_req_portmap),
-+	.addip			= &addport,
-+	.addip_kernel		= &addport_kernel,
-+	.delip			= &delport,
-+	.delip_kernel		= &delport_kernel,
-+	.testip			= &testport,
-+	.testip_kernel		= &testport_kernel,
-+	.header_size		= sizeof(struct ip_set_req_portmap_create),
-+	.list_header		= &list_header,
-+	.list_members_size	= &list_members_size,
-+	.list_members		= &list_members,
-+	.me			= THIS_MODULE,
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("portmap type of IP sets");
-+
-+static int __init init(void)
-+{
-+	return ip_set_register_set_type(&ip_set_portmap);
-+}
-+
-+static void __exit fini(void)
-+{
-+	/* FIXME: possible race with ip_set_create() */
-+	ip_set_unregister_set_type(&ip_set_portmap);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ipt_set.c linux-2.6.16-owrt/net/ipv4/netfilter/ipt_set.c
---- linux-2.6.16/net/ipv4/netfilter/ipt_set.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ipt_set.c	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,112 @@
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ *                         Patrick Schaaf <bof@bof.de>
-+ *                         Martin Josefsson <gandalf@wlug.westbo.se>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* Kernel module to match an IP set. */
-+
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ip_set.h>
-+#include <linux/netfilter_ipv4/ipt_set.h>
-+
-+static inline int
-+match_set(const struct ipt_set_info *info,
-+	  const struct sk_buff *skb,
-+	  int inv)
-+{	
-+	if (ip_set_testip_kernel(info->index, skb, info->flags))
-+		inv = !inv;
-+	return inv;
-+}
-+
-+static int
-+match(const struct sk_buff *skb,
-+      const struct net_device *in,
-+      const struct net_device *out,
-+      const void *matchinfo,
-+      int offset,
-+      int *hotdrop)
-+{
-+	const struct ipt_set_info_match *info = matchinfo;
-+		
-+	return match_set(&info->match_set,
-+			 skb,
-+			 info->match_set.flags[0] & IPSET_MATCH_INV);
-+}
-+
-+static int
-+checkentry(const char *tablename,
-+	   const struct ipt_ip *ip,
-+	   void *matchinfo,
-+	   unsigned int matchsize,
-+	   unsigned int hook_mask)
-+{
-+	struct ipt_set_info_match *info = 
-+		(struct ipt_set_info_match *) matchinfo;
-+	ip_set_id_t index;
-+
-+	if (matchsize != IPT_ALIGN(sizeof(struct ipt_set_info_match))) {
-+		ip_set_printk("invalid matchsize %d", matchsize);
-+		return 0;
-+	}
-+
-+	index = ip_set_get_byindex(info->match_set.index);
-+		
-+	if (index == IP_SET_INVALID_ID) {
-+		ip_set_printk("Cannot find set indentified by id %u to match",
-+			      info->match_set.index);
-+		return 0;	/* error */
-+	}
-+	if (info->match_set.flags[IP_SET_MAX_BINDINGS] != 0) {
-+		ip_set_printk("That's nasty!");
-+		return 0;	/* error */
-+	}
-+
-+	return 1;
-+}
-+
-+static void destroy(void *matchinfo, unsigned int matchsize)
-+{
-+	struct ipt_set_info_match *info = matchinfo;
-+
-+	if (matchsize != IPT_ALIGN(sizeof(struct ipt_set_info_match))) {
-+		ip_set_printk("invalid matchsize %d", matchsize);
-+		return;
-+	}
-+
-+	ip_set_put(info->match_set.index);
-+}
-+
-+static struct ipt_match set_match = {
-+	.name		= "set",
-+	.match		= &match,
-+	.checkentry	= &checkentry,
-+	.destroy	= &destroy,
-+	.me		= THIS_MODULE
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("iptables IP set match module");
-+
-+static int __init init(void)
-+{
-+	return ipt_register_match(&set_match);
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_match(&set_match);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ipt_SET.c linux-2.6.16-owrt/net/ipv4/netfilter/ipt_SET.c
---- linux-2.6.16/net/ipv4/netfilter/ipt_SET.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ipt_SET.c	2006-03-20 12:53:59.000000000 +0100
-@@ -0,0 +1,128 @@
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ *                         Patrick Schaaf <bof@bof.de>
-+ *                         Martin Josefsson <gandalf@wlug.westbo.se>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.  
-+ */
-+
-+/* ipt_SET.c - netfilter target to manipulate IP sets */
-+
-+#include <linux/types.h>
-+#include <linux/ip.h>
-+#include <linux/timer.h>
-+#include <linux/module.h>
-+#include <linux/netfilter.h>
-+#include <linux/netdevice.h>
-+#include <linux/if.h>
-+#include <linux/inetdevice.h>
-+#include <net/protocol.h>
-+#include <net/checksum.h>
-+#include <linux/netfilter_ipv4.h>
-+#include <linux/netfilter_ipv4/ip_nat_rule.h>
-+#include <linux/netfilter_ipv4/ipt_set.h>
-+
-+static unsigned int
-+target(struct sk_buff **pskb,
-+       const struct net_device *in,
-+       const struct net_device *out,
-+       unsigned int hooknum,
-+       const void *targinfo,
-+       void *userinfo)
-+{
-+	const struct ipt_set_info_target *info = targinfo;
-+	
-+	if (info->add_set.index != IP_SET_INVALID_ID)
-+		ip_set_addip_kernel(info->add_set.index,
-+				    *pskb,
-+				    info->add_set.flags);
-+	if (info->del_set.index != IP_SET_INVALID_ID)
-+		ip_set_delip_kernel(info->del_set.index,
-+				    *pskb,
-+				    info->del_set.flags);
-+
-+	return IPT_CONTINUE;
-+}
-+
-+static int
-+checkentry(const char *tablename,
-+	   const struct ipt_entry *e,
-+	   void *targinfo,
-+	   unsigned int targinfosize, unsigned int hook_mask)
-+{
-+	struct ipt_set_info_target *info = 
-+		(struct ipt_set_info_target *) targinfo;
-+	ip_set_id_t index;
-+
-+	if (targinfosize != IPT_ALIGN(sizeof(*info))) {
-+		DP("bad target info size %u", targinfosize);
-+		return 0;
-+	}
-+
-+	if (info->add_set.index != IP_SET_INVALID_ID) {
-+		index = ip_set_get_byindex(info->add_set.index);
-+		if (index == IP_SET_INVALID_ID) {
-+			ip_set_printk("cannot find add_set index %u as target",
-+				      info->add_set.index);
-+			return 0;	/* error */
-+		}
-+	}
-+
-+	if (info->del_set.index != IP_SET_INVALID_ID) {
-+		index = ip_set_get_byindex(info->del_set.index);
-+		if (index == IP_SET_INVALID_ID) {
-+			ip_set_printk("cannot find del_set index %u as target",
-+				      info->del_set.index);
-+			return 0;	/* error */
-+		}
-+	}
-+	if (info->add_set.flags[IP_SET_MAX_BINDINGS] != 0
-+	    || info->del_set.flags[IP_SET_MAX_BINDINGS] != 0) {
-+		ip_set_printk("That's nasty!");
-+		return 0;	/* error */
-+	}
-+
-+	return 1;
-+}
-+
-+static void destroy(void *targetinfo, unsigned int targetsize)
-+{
-+	struct ipt_set_info_target *info = targetinfo;
-+
-+	if (targetsize != IPT_ALIGN(sizeof(struct ipt_set_info_target))) {
-+		ip_set_printk("invalid targetsize %d", targetsize);
-+		return;
-+	}
-+
-+	if (info->add_set.index != IP_SET_INVALID_ID)
-+		ip_set_put(info->add_set.index);
-+	if (info->del_set.index != IP_SET_INVALID_ID)
-+		ip_set_put(info->del_set.index);
-+}
-+
-+static struct ipt_target SET_target = {
-+	.name 		= "SET",
-+	.target 	= target,
-+	.checkentry 	= checkentry,
-+	.destroy 	= destroy,
-+	.me 		= THIS_MODULE
-+};
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
-+MODULE_DESCRIPTION("iptables IP set target module");
-+
-+static int __init init(void)
-+{
-+	return ipt_register_target(&SET_target);
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_target(&SET_target);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -Nur linux-2.6.16/net/ipv4/netfilter/Kconfig linux-2.6.16-owrt/net/ipv4/netfilter/Kconfig
---- linux-2.6.16/net/ipv4/netfilter/Kconfig	2006-03-20 12:52:42.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/Kconfig	2006-03-20 12:53:59.000000000 +0100
-@@ -623,5 +623,106 @@
- 	  Allows altering the ARP packet payload: source and destination
- 	  hardware and network addresses.
- 
-+config IP_NF_SET
-+	tristate "IP set support"
-+	depends on INET && NETFILTER
-+	help
-+	  This option adds IP set support to the kernel.
-+	  In order to define and use sets, you need the userspace utility
-+	  ipset(8).
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+
-+config IP_NF_SET_MAX
-+	int "Maximum number of IP sets"
-+	default 256
-+	range 2 65534
-+	depends on IP_NF_SET
-+	help
-+	  You can define here default value of the maximum number 
-+	  of IP sets for the kernel.
-+
-+	  The value can be overriden by the 'max_sets' module
-+	  parameter of the 'ip_set' module.
-+
-+config IP_NF_SET_HASHSIZE
-+	int "Hash size for bindings of IP sets"
-+	default 1024
-+	depends on IP_NF_SET
-+	help
-+	  You can define here default value of the hash size for
-+	  bindings of IP sets.
-+
-+	  The value can be overriden by the 'hash_size' module
-+	  parameter of the 'ip_set' module.
-+
-+config IP_NF_SET_IPMAP
-+	tristate "ipmap set support"
-+	depends on IP_NF_SET
-+	help
-+	  This option adds the ipmap set type support.
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+
-+config IP_NF_SET_MACIPMAP
-+	tristate "macipmap set support"
-+	depends on IP_NF_SET
-+	help
-+	  This option adds the macipmap set type support.
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+
-+config IP_NF_SET_PORTMAP
-+	tristate "portmap set support"
-+	depends on IP_NF_SET
-+	help
-+	  This option adds the portmap set type support.
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+
-+config IP_NF_SET_IPHASH
-+	tristate "iphash set support"
-+	depends on IP_NF_SET
-+	help
-+	  This option adds the iphash set type support.
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+
-+config IP_NF_SET_NETHASH
-+	tristate "nethash set support"
-+	depends on IP_NF_SET
-+	help
-+	  This option adds the nethash set type support.
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+
-+config IP_NF_SET_IPTREE
-+	tristate "iptree set support"
-+	depends on IP_NF_SET
-+	help
-+	  This option adds the iptree set type support.
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+
-+config IP_NF_MATCH_SET
-+	tristate "set match support"
-+	depends on IP_NF_SET
-+	help
-+	  Set matching matches against given IP sets.
-+	  You need the ipset utility to create and set up the sets.
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+
-+config IP_NF_TARGET_SET
-+	tristate "SET target support"
-+	depends on IP_NF_SET
-+	help
-+	  The SET target makes possible to add/delete entries
-+	  in IP sets.
-+	  You need the ipset utility to create and set up the sets.
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+
-+
- endmenu
- 
-diff -Nur linux-2.6.16/net/ipv4/netfilter/Makefile linux-2.6.16-owrt/net/ipv4/netfilter/Makefile
---- linux-2.6.16/net/ipv4/netfilter/Makefile	2006-03-20 12:52:42.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/Makefile	2006-03-20 12:56:30.000000000 +0100
-@@ -47,6 +47,7 @@
- 
- # matches
- obj-$(CONFIG_IP_NF_MATCH_HASHLIMIT) += ipt_hashlimit.o
-+obj-$(CONFIG_IP_NF_MATCH_SET) += ipt_set.o
- obj-$(CONFIG_IP_NF_MATCH_IPRANGE) += ipt_iprange.o
- obj-$(CONFIG_IP_NF_MATCH_MULTIPORT) += ipt_multiport.o
- obj-$(CONFIG_IP_NF_MATCH_OWNER) += ipt_owner.o
-@@ -74,6 +75,17 @@
- obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
- obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o
- obj-$(CONFIG_IP_NF_TARGET_TCPMSS) += ipt_TCPMSS.o
-+obj-$(CONFIG_IP_NF_TARGET_SET) += ipt_SET.o
-+
-+# sets
-+obj-$(CONFIG_IP_NF_SET) += ip_set.o
-+obj-$(CONFIG_IP_NF_SET_IPMAP) += ip_set_ipmap.o
-+obj-$(CONFIG_IP_NF_SET_PORTMAP) += ip_set_portmap.o
-+obj-$(CONFIG_IP_NF_SET_MACIPMAP) += ip_set_macipmap.o
-+obj-$(CONFIG_IP_NF_SET_IPHASH) += ip_set_iphash.o
-+obj-$(CONFIG_IP_NF_SET_NETHASH) += ip_set_nethash.o
-+obj-$(CONFIG_IP_NF_SET_IPTREE) += ip_set_iptree.o
-+
- obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o
- obj-$(CONFIG_IP_NF_TARGET_TTL) += ipt_TTL.o
- 
diff --git a/openwrt/target/linux/generic-2.6/patches/105-netfilter_time.patch b/openwrt/target/linux/generic-2.6/patches/105-netfilter_time.patch
deleted file mode 100644
index 34257ee93c..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/105-netfilter_time.patch
+++ /dev/null
@@ -1,241 +0,0 @@
-diff -urN linux-2.6.15-rc6.orig/net/ipv4/netfilter/ipt_time.c linux-2.6.15-rc6/net/ipv4/netfilter/ipt_time.c
---- linux-2.6.15-rc6.orig/net/ipv4/netfilter/ipt_time.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-rc6/net/ipv4/netfilter/ipt_time.c	2006-01-07 13:02:59.000000000 +0100
-@@ -0,0 +1,178 @@
-+/*
-+  This is a module which is used for time matching
-+  It is using some modified code from dietlibc (localtime() function)
-+  that you can find at http://www.fefe.de/dietlibc/
-+  This file is distributed under the terms of the GNU General Public
-+  License (GPL). Copies of the GPL can be obtained from: ftp://prep.ai.mit.edu/pub/gnu/GPL
-+  2001-05-04 Fabrice MARIE <fabrice@netfilter.org> : initial development.
-+  2001-21-05 Fabrice MARIE <fabrice@netfilter.org> : bug fix in the match code,
-+     thanks to "Zeng Yu" <zengy@capitel.com.cn> for bug report.
-+  2001-26-09 Fabrice MARIE <fabrice@netfilter.org> : force the match to be in LOCAL_IN or PRE_ROUTING only.
-+  2001-30-11 Fabrice : added the possibility to use the match in FORWARD/OUTPUT with a little hack,
-+     added Nguyen Dang Phuoc Dong <dongnd@tlnet.com.vn> patch to support timezones.
-+  2004-05-02 Fabrice : added support for date matching, from an idea of Fabien COELHO.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ipt_time.h>
-+#include <linux/time.h>
-+
-+MODULE_AUTHOR("Fabrice MARIE <fabrice@netfilter.org>");
-+MODULE_DESCRIPTION("Match arrival timestamp/date");
-+MODULE_LICENSE("GPL");
-+
-+struct tm
-+{
-+	int tm_sec;                   /* Seconds.     [0-60] (1 leap second) */
-+	int tm_min;                   /* Minutes.     [0-59] */
-+	int tm_hour;                  /* Hours.       [0-23] */
-+	int tm_mday;                  /* Day.         [1-31] */
-+	int tm_mon;                   /* Month.       [0-11] */
-+	int tm_year;                  /* Year - 1900.  */
-+	int tm_wday;                  /* Day of week. [0-6] */
-+	int tm_yday;                  /* Days in year.[0-365] */
-+	int tm_isdst;                 /* DST.         [-1/0/1]*/
-+
-+	long int tm_gmtoff;           /* we don't care, we count from GMT */
-+	const char *tm_zone;          /* we don't care, we count from GMT */
-+};
-+
-+void
-+localtime(const u32 time, struct tm *r);
-+
-+static int
-+match(const struct sk_buff *skb,
-+      const struct net_device *in,
-+      const struct net_device *out,
-+      const void *matchinfo,
-+      int offset,
-+      int *hotdrop)
-+{
-+	const struct ipt_time_info *info = matchinfo;   /* match info for rule */
-+	struct tm currenttime;                          /* time human readable */
-+	u_int8_t days_of_week[7] = {64, 32, 16, 8, 4, 2, 1};
-+	u_int16_t packet_time;
-+
-+	/* We might not have a timestamp, get one */
-+	if (skb->tstamp.off_sec == 0)
-+		__net_timestamp((struct sk_buff *)skb);
-+
-+	/* First we make sure we are in the date start-stop boundaries */
-+	if ((skb->tstamp.off_sec < info->date_start) || (skb->tstamp.off_sec > info->date_stop))
-+		return 0; /* We are outside the date boundaries */
-+
-+	/* Transform the timestamp of the packet, in a human readable form */
-+	localtime(skb->tstamp.off_sec, &currenttime);
-+
-+	/* check if we match this timestamp, we start by the days... */
-+	if ((days_of_week[currenttime.tm_wday] & info->days_match) != days_of_week[currenttime.tm_wday])
-+		return 0; /* the day doesn't match */
-+
-+	/* ... check the time now */
-+	packet_time = (currenttime.tm_hour * 60) + currenttime.tm_min;
-+	if ((packet_time < info->time_start) || (packet_time > info->time_stop))
-+		return 0;
-+
-+	/* here we match ! */
-+	return 1;
-+}
-+
-+static int
-+checkentry(const char *tablename,
-+           const struct ipt_ip *ip,
-+           void *matchinfo,
-+           unsigned int matchsize,
-+           unsigned int hook_mask)
-+{
-+	struct ipt_time_info *info = matchinfo;   /* match info for rule */
-+
-+	/* First, check that we are in the correct hooks */
-+	if (hook_mask
-+            & ~((1 << NF_IP_PRE_ROUTING) | (1 << NF_IP_LOCAL_IN) | (1 << NF_IP_FORWARD) | (1 << NF_IP_LOCAL_OUT)))
-+	{
-+		printk("ipt_time: error, only valid for PRE_ROUTING, LOCAL_IN, FORWARD and OUTPUT)\n");
-+		return 0;
-+	}
-+
-+	/* Check the size */
-+	if (matchsize != IPT_ALIGN(sizeof(struct ipt_time_info)))
-+		return 0;
-+	/* Now check the coherence of the data ... */
-+	if ((info->time_start > 1439) ||        /* 23*60+59 = 1439*/
-+	    (info->time_stop  > 1439))
-+	{
-+		printk(KERN_WARNING "ipt_time: invalid argument\n");
-+		return 0;
-+	}
-+
-+	return 1;
-+}
-+
-+static struct ipt_match time_match = {
-+	.name = "time",
-+	.match = &match,
-+	.checkentry = &checkentry,
-+	.me = THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+	printk("ipt_time loading\n");
-+	return ipt_register_match(&time_match);
-+}
-+
-+static void __exit fini(void)
-+{
-+	ipt_unregister_match(&time_match);
-+	printk("ipt_time unloaded\n");
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
-+
-+/* The part below is borowed and modified from dietlibc */
-+
-+/* seconds per day */
-+#define SPD 24*60*60
-+
-+void
-+localtime(const u32 time, struct tm *r) {
-+	u32 i, timep;
-+	extern struct timezone sys_tz;
-+	const unsigned int __spm[12] =
-+		{ 0,
-+		  (31),
-+		  (31+28),
-+		  (31+28+31),
-+		  (31+28+31+30),
-+		  (31+28+31+30+31),
-+		  (31+28+31+30+31+30),
-+		  (31+28+31+30+31+30+31),
-+		  (31+28+31+30+31+30+31+31),
-+		  (31+28+31+30+31+30+31+31+30),
-+		  (31+28+31+30+31+30+31+31+30+31),
-+		  (31+28+31+30+31+30+31+31+30+31+30),
-+		};
-+	register u32 work;
-+
-+	timep = time - (sys_tz.tz_minuteswest * 60);
-+	work=timep%(SPD);
-+	r->tm_sec=work%60; work/=60;
-+	r->tm_min=work%60; r->tm_hour=work/60;
-+	work=timep/(SPD);
-+	r->tm_wday=(4+work)%7;
-+	for (i=1970; ; ++i) {
-+		register time_t k= (!(i%4) && ((i%100) || !(i%400)))?366:365;
-+		if (work>k)
-+			work-=k;
-+		else
-+			break;
-+	}
-+	r->tm_year=i-1900;
-+	for (i=11; i && __spm[i]>work; --i) ;
-+	r->tm_mon=i;
-+	r->tm_mday=work-__spm[i]+1;
-+}
-diff -urN linux-2.6.15-rc6.orig/net/ipv4/netfilter/Kconfig linux-2.6.15-rc6/net/ipv4/netfilter/Kconfig
---- linux-2.6.15-rc6.orig/net/ipv4/netfilter/Kconfig	2006-01-07 13:00:21.000000000 +0100
-+++ linux-2.6.15-rc6/net/ipv4/netfilter/Kconfig	2006-01-07 13:05:07.000000000 +0100
-@@ -278,6 +278,22 @@
- 
- 	  To compile it as a module, choose M here.  If unsure, say N.
- 
-+	  
-+config IP_NF_MATCH_TIME
-+	tristate  'TIME match support'
-+	depends on IP_NF_IPTABLES
-+	help
-+	  This option adds a `time' match, which allows you
-+	  to match based on the packet arrival time/date
-+	  (arrival time/date at the machine which netfilter is running on) or
-+	  departure time/date (for locally generated packets).
-+	  
-+	  If you say Y here, try iptables -m time --help for more information.
-+	  If you want to compile it as a module, say M here and read
-+	  
-+	  Documentation/modules.txt.  If unsure, say `N'.
-+
-+
- config IP_NF_MATCH_RECENT
- 	tristate "recent match support"
- 	depends on IP_NF_IPTABLES
-diff -urN linux-2.6.15-rc6.orig/net/ipv4/netfilter/Makefile linux-2.6.15-rc6/net/ipv4/netfilter/Makefile
---- linux-2.6.15-rc6.orig/net/ipv4/netfilter/Makefile	2006-01-07 13:00:21.000000000 +0100
-+++ linux-2.6.15-rc6/net/ipv4/netfilter/Makefile	2006-01-07 13:03:50.000000000 +0100
-@@ -58,6 +58,7 @@
- obj-$(CONFIG_IP_NF_MATCH_MULTIPORT) += ipt_multiport.o
- obj-$(CONFIG_IP_NF_MATCH_OWNER) += ipt_owner.o
- obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o
-+obj-$(CONFIG_IP_NF_MATCH_TIME) += ipt_time.o
- obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o
- obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn.o
- obj-$(CONFIG_IP_NF_MATCH_DSCP) += ipt_dscp.o
-diff -urN linux-2.6.15-rc6.orig/include/linux/netfilter_ipv4/ipt_time.h linux-2.6.15-rc6/include/linux/netfilter_ipv4/ipt_time.h
---- linux-2.6.15-rc6.orig/include/linux/netfilter_ipv4/ipt_time.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15-rc6/include/linux/netfilter_ipv4/ipt_time.h	2006-01-07 13:02:14.000000000 +0100
-@@ -0,0 +1,18 @@
-+#ifndef __ipt_time_h_included__
-+#define __ipt_time_h_included__
-+
-+
-+struct ipt_time_info {
-+	u_int8_t  days_match;   /* 1 bit per day. -SMTWTFS                      */
-+	u_int16_t time_start;   /* 0 < time_start < 23*60+59 = 1439             */
-+	u_int16_t time_stop;    /* 0:0 < time_stat < 23:59                      */
-+
-+				/* FIXME: Keep this one for userspace iptables binary compability: */
-+	u_int8_t  kerneltime;   /* ignore skb time (and use kerneltime) or not. */
-+
-+	time_t    date_start;
-+	time_t    date_stop;
-+};
-+
-+
-+#endif /* __ipt_time_h_included__ */
diff --git a/openwrt/target/linux/generic-2.6/patches/106-netfilter_imq.patch b/openwrt/target/linux/generic-2.6/patches/106-netfilter_imq.patch
deleted file mode 100644
index 8114db621b..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/106-netfilter_imq.patch
+++ /dev/null
@@ -1,885 +0,0 @@
-diff -Nur linux-2.6.16/drivers/net/imq.c linux-2.6.16-owrt/drivers/net/imq.c
---- linux-2.6.16/drivers/net/imq.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/drivers/net/imq.c	2006-03-20 12:59:23.000000000 +0100
-@@ -0,0 +1,403 @@
-+/*
-+ *             Pseudo-driver for the intermediate queue device.
-+ *
-+ *             This program is free software; you can redistribute it and/or
-+ *             modify it under the terms of the GNU General Public License
-+ *             as published by the Free Software Foundation; either version
-+ *             2 of the License, or (at your option) any later version.
-+ *
-+ * Authors:    Patrick McHardy, <kaber@trash.net>
-+ *
-+ *            The first version was written by Martin Devera, <devik@cdi.cz>
-+ *
-+ * Credits:    Jan Rafaj <imq2t@cedric.vabo.cz>
-+ *              - Update patch to 2.4.21
-+ *             Sebastian Strollo <sstrollo@nortelnetworks.com>
-+ *              - Fix "Dead-loop on netdevice imq"-issue
-+ *             Marcel Sebek <sebek64@post.cz>
-+ *              - Update to 2.6.2-rc1
-+ *
-+ *	       After some time of inactivity there is a group taking care
-+ *	       of IMQ again: http://www.linuximq.net
-+ *
-+ *
-+ *	       2004/06/30 - New version of IMQ patch to kernels <=2.6.7 including
-+ *	       the following changes:
-+ *
-+ *	       - Correction of ipv6 support "+"s issue (Hasso Tepper)
-+ *	       - Correction of imq_init_devs() issue that resulted in 
-+ *	       kernel OOPS unloading IMQ as module (Norbert Buchmuller)
-+ *	       - Addition of functionality to choose number of IMQ devices
-+ *	       during kernel config (Andre Correa)
-+ *	       - Addition of functionality to choose how IMQ hooks on 
-+ *	       PRE and POSTROUTING (after or before NAT) (Andre Correa)
-+ *	       - Cosmetic corrections (Norbert Buchmuller) (Andre Correa)
-+ *
-+ *
-+ *             2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were 
-+ *             released with almost no problems. 2.6.14-x was released 
-+ *             with some important changes: nfcache was removed; After 
-+ *             some weeks of trouble we figured out that some IMQ fields 
-+ *             in skb were missing in skbuff.c - skb_clone and copy_skb_header.
-+ *             These functions are correctly patched by this new patch version.
-+ *
-+ *             Thanks for all who helped to figure out all the problems with 
-+ *             2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX,
-+ *             Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully 
-+ *             I didn't forget anybody). I apologize again for my lack of time.
-+ *
-+ *             More info at: http://www.linuximq.net/ (Andre Correa)
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/moduleparam.h>
-+#include <linux/skbuff.h>
-+#include <linux/netdevice.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/if_arp.h>
-+#include <linux/netfilter.h>
-+#include <linux/netfilter_ipv4.h>
-+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-+	#include <linux/netfilter_ipv6.h>
-+#endif
-+#include <linux/imq.h>
-+#include <net/pkt_sched.h>
-+
-+static nf_hookfn imq_nf_hook;
-+
-+static struct nf_hook_ops imq_ingress_ipv4 = {
-+       .hook           = imq_nf_hook,
-+       .owner          = THIS_MODULE,
-+       .pf             = PF_INET,
-+       .hooknum        = NF_IP_PRE_ROUTING,
-+#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
-+       .priority       = NF_IP_PRI_MANGLE + 1
-+#else
-+       .priority       = NF_IP_PRI_NAT_DST + 1
-+#endif
-+};
-+
-+static struct nf_hook_ops imq_egress_ipv4 = {
-+       .hook           = imq_nf_hook,
-+       .owner          = THIS_MODULE,
-+       .pf             = PF_INET,
-+       .hooknum        = NF_IP_POST_ROUTING,
-+#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
-+       .priority       = NF_IP_PRI_LAST
-+#else
-+       .priority       = NF_IP_PRI_NAT_SRC - 1
-+#endif
-+};
-+
-+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-+static struct nf_hook_ops imq_ingress_ipv6 = {
-+       .hook           = imq_nf_hook,
-+       .owner          = THIS_MODULE,
-+       .pf             = PF_INET6,
-+       .hooknum        = NF_IP6_PRE_ROUTING,
-+#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
-+       .priority       = NF_IP6_PRI_MANGLE + 1
-+#else
-+       .priority       = NF_IP6_PRI_NAT_DST + 1
-+#endif
-+};
-+
-+static struct nf_hook_ops imq_egress_ipv6 = {
-+       .hook           = imq_nf_hook,
-+       .owner          = THIS_MODULE,
-+       .pf             = PF_INET6,
-+       .hooknum        = NF_IP6_POST_ROUTING,
-+#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
-+       .priority       = NF_IP6_PRI_LAST
-+#else
-+       .priority       = NF_IP6_PRI_NAT_SRC - 1
-+#endif
-+};
-+#endif
-+
-+#if defined(CONFIG_IMQ_NUM_DEVS)
-+static unsigned int numdevs = CONFIG_IMQ_NUM_DEVS;
-+#else
-+static unsigned int numdevs = 2;
-+#endif
-+
-+static struct net_device *imq_devs;
-+
-+static struct net_device_stats *imq_get_stats(struct net_device *dev)
-+{
-+       return (struct net_device_stats *)dev->priv;
-+}
-+
-+/* called for packets kfree'd in qdiscs at places other than enqueue */
-+static void imq_skb_destructor(struct sk_buff *skb)
-+{
-+       struct nf_info *info = skb->nf_info;
-+
-+       if (info) {
-+               if (info->indev)
-+                       dev_put(info->indev);
-+               if (info->outdev)
-+                       dev_put(info->outdev);
-+               kfree(info);
-+       }
-+}
-+
-+static int imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+       struct net_device_stats *stats = (struct net_device_stats*) dev->priv;
-+
-+       stats->tx_bytes += skb->len;
-+       stats->tx_packets++;
-+
-+       skb->imq_flags = 0;
-+       skb->destructor = NULL;
-+
-+       dev->trans_start = jiffies;
-+       nf_reinject(skb, skb->nf_info, NF_ACCEPT);
-+       return 0;
-+}
-+
-+static int imq_nf_queue(struct sk_buff *skb, struct nf_info *info, unsigned queue_num, void *data)
-+{
-+       struct net_device *dev;
-+       struct net_device_stats *stats;
-+       struct sk_buff *skb2 = NULL;
-+       struct Qdisc *q;
-+       unsigned int index = skb->imq_flags&IMQ_F_IFMASK;
-+       int ret = -1;
-+
-+       if (index > numdevs) 
-+               return -1;
-+
-+       dev = imq_devs + index;
-+       if (!(dev->flags & IFF_UP)) {
-+               skb->imq_flags = 0;
-+               nf_reinject(skb, info, NF_ACCEPT);
-+               return 0;
-+       }
-+       dev->last_rx = jiffies;
-+
-+       if (skb->destructor) {
-+               skb2 = skb;
-+               skb = skb_clone(skb, GFP_ATOMIC);
-+               if (!skb)
-+                       return -1;
-+       }
-+       skb->nf_info = info;
-+
-+       stats = (struct net_device_stats *)dev->priv;
-+       stats->rx_bytes+= skb->len;
-+       stats->rx_packets++;
-+
-+       spin_lock_bh(&dev->queue_lock);
-+       q = dev->qdisc;
-+       if (q->enqueue) {
-+               q->enqueue(skb_get(skb), q);
-+               if (skb_shared(skb)) {
-+                       skb->destructor = imq_skb_destructor;
-+                       kfree_skb(skb);
-+                       ret = 0;
-+               }
-+       }
-+       if (spin_is_locked(&dev->xmit_lock))
-+               netif_schedule(dev);
-+       else
-+
-+        while (!netif_queue_stopped(dev) &&
-+               qdisc_restart(dev)<0)
-+                /* NOTHING */;
-+
-+       spin_unlock_bh(&dev->queue_lock);
-+
-+       if (skb2)
-+               kfree_skb(ret ? skb : skb2);
-+
-+       return ret;
-+}
-+
-+static struct nf_queue_handler nfqh = {
-+       .name  = "imq",
-+       .outfn = imq_nf_queue,
-+};
-+
-+static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff **pskb,
-+                  const struct net_device *indev,
-+                  const struct net_device *outdev,
-+                  int (*okfn)(struct sk_buff *))
-+{
-+       if ((*pskb)->imq_flags & IMQ_F_ENQUEUE)
-+               return NF_QUEUE;
-+
-+       return NF_ACCEPT;
-+}
-+
-+
-+static int __init imq_init_hooks(void)
-+{
-+       int err;
-+
-+       err = nf_register_queue_handler(PF_INET, &nfqh);
-+       if (err > 0)
-+               goto err1;
-+       if ((err = nf_register_hook(&imq_ingress_ipv4)))
-+               goto err2;
-+       if ((err = nf_register_hook(&imq_egress_ipv4)))
-+               goto err3;
-+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-+       if ((err = nf_register_queue_handler(PF_INET6, &nfqh)))
-+               goto err4;
-+       if ((err = nf_register_hook(&imq_ingress_ipv6)))
-+               goto err5;
-+       if ((err = nf_register_hook(&imq_egress_ipv6)))
-+               goto err6;
-+#endif
-+
-+       return 0;
-+
-+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-+err6:
-+       nf_unregister_hook(&imq_ingress_ipv6);
-+err5:
-+       nf_unregister_queue_handler(PF_INET6);
-+err4:
-+       nf_unregister_hook(&imq_egress_ipv6);
-+#endif
-+err3:
-+       nf_unregister_hook(&imq_ingress_ipv4);
-+err2:
-+       nf_unregister_queue_handler(PF_INET);
-+err1:
-+       return err;
-+}
-+
-+static void __exit imq_unhook(void)
-+{
-+       nf_unregister_hook(&imq_ingress_ipv4);
-+       nf_unregister_hook(&imq_egress_ipv4);
-+       nf_unregister_queue_handler(PF_INET);
-+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-+       nf_unregister_hook(&imq_ingress_ipv6);
-+       nf_unregister_hook(&imq_egress_ipv6);
-+       nf_unregister_queue_handler(PF_INET6);
-+#endif
-+}
-+
-+static int __init imq_dev_init(struct net_device *dev)
-+{
-+       dev->hard_start_xmit    = imq_dev_xmit;
-+       dev->type               = ARPHRD_VOID;
-+       dev->mtu                = 1500;
-+       dev->tx_queue_len       = 30;
-+       dev->flags              = IFF_NOARP;
-+       dev->priv = kmalloc(sizeof(struct net_device_stats), GFP_KERNEL);
-+       if (dev->priv == NULL)
-+               return -ENOMEM;
-+       memset(dev->priv, 0, sizeof(struct net_device_stats));
-+       dev->get_stats          = imq_get_stats;
-+
-+       return 0;
-+}
-+
-+static void imq_dev_uninit(struct net_device *dev)
-+{
-+       kfree(dev->priv);
-+}
-+
-+static int __init imq_init_devs(void)
-+{
-+       struct net_device *dev;
-+       int i,j;
-+       j = numdevs;
-+
-+       if (!numdevs || numdevs > IMQ_MAX_DEVS) {
-+               printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
-+                      IMQ_MAX_DEVS);
-+               return -EINVAL;
-+       }
-+
-+       imq_devs = kmalloc(sizeof(struct net_device) * numdevs, GFP_KERNEL);
-+       if (!imq_devs)
-+               return -ENOMEM;
-+       memset(imq_devs, 0, sizeof(struct net_device) * numdevs);
-+
-+       /* we start counting at zero */
-+       numdevs--;
-+
-+       for (i = 0, dev = imq_devs; i <= numdevs; i++, dev++) {
-+               SET_MODULE_OWNER(dev);
-+               strcpy(dev->name, "imq%d");
-+               dev->init   = imq_dev_init;
-+               dev->uninit = imq_dev_uninit;
-+
-+               if (register_netdev(dev) < 0)
-+                       goto err_register;
-+       }
-+       printk(KERN_INFO "IMQ starting with %u devices...\n", j);
-+       return 0;
-+
-+err_register:
-+       for (; i; i--)
-+               unregister_netdev(--dev);
-+       kfree(imq_devs);
-+       return -EIO;
-+}
-+
-+static void imq_cleanup_devs(void)
-+{
-+       int i;
-+       struct net_device *dev = imq_devs;
-+
-+       for (i = 0; i <= numdevs; i++)
-+               unregister_netdev(dev++);
-+
-+       kfree(imq_devs);
-+}
-+
-+static int __init imq_init_module(void)
-+{
-+       int err;
-+
-+       if ((err = imq_init_devs())) {
-+               printk(KERN_ERR "IMQ: Error trying imq_init_devs()\n");
-+               return err;
-+       }
-+       if ((err = imq_init_hooks())) {
-+               printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
-+               imq_cleanup_devs();
-+               return err;
-+       }
-+
-+       printk(KERN_INFO "IMQ driver loaded successfully.\n");
-+
-+#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
-+       printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n");
-+#else
-+       printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n");
-+#endif
-+#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB)
-+       printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n");
-+#else
-+       printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n");
-+#endif
-+
-+       return 0;
-+}
-+
-+static void __exit imq_cleanup_module(void)
-+{
-+       imq_unhook();
-+       imq_cleanup_devs();
-+       printk(KERN_INFO "IMQ driver unloaded successfully.\n");
-+}
-+
-+
-+module_init(imq_init_module);
-+module_exit(imq_cleanup_module);
-+
-+module_param(numdevs, int, 0);
-+MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will be created)");
-+MODULE_AUTHOR("http://www.linuximq.net");
-+MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.6.16/drivers/net/Kconfig linux-2.6.16-owrt/drivers/net/Kconfig
---- linux-2.6.16/drivers/net/Kconfig	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/drivers/net/Kconfig	2006-03-20 12:59:23.000000000 +0100
-@@ -93,6 +93,129 @@
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called eql.  If unsure, say N.
- 
-+config IMQ
-+       tristate "IMQ (intermediate queueing device) support"
-+       depends on NETDEVICES && NETFILTER
-+       ---help---
-+         The IMQ device(s) is used as placeholder for QoS queueing disciplines.
-+         Every packet entering/leaving the IP stack can be directed through
-+         the IMQ device where it's enqueued/dequeued to the attached qdisc.
-+         This allows you to treat network devices as classes and distribute
-+         bandwidth among them. Iptables is used to specify through which IMQ
-+         device, if any, packets travel.
-+
-+         More information at: http://www.linuximq.net/
-+
-+         To compile this driver as a module, choose M here: the module
-+         will be called imq.  If unsure, say N.
-+
-+choice
-+        prompt "IMQ behavior (PRE/POSTROUTING)"
-+	depends on IMQ
-+        default IMQ_BEHAVIOR_BA
-+        help
-+
-+                This settings defines how IMQ behaves in respect to its
-+                hooking in PREROUTING and POSTROUTING.
-+
-+                IMQ can work in any of the following ways:
-+
-+                    PREROUTING   |      POSTROUTING
-+                -----------------|-------------------
-+                #1  After NAT    |      After NAT
-+                #2  After NAT    |      Before NAT
-+                #3  Before NAT   |      After NAT
-+                #4  Before NAT   |      Before NAT
-+
-+                The default behavior is to hook before NAT on PREROUTING
-+                and after NAT on POSTROUTING (#3).
-+
-+                This settings are specially usefull when trying to use IMQ
-+                to shape NATed clients.
-+
-+                More information can be found at: www.linuximq.net
-+
-+                If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_AA
-+        bool "IMQ AA"
-+        help
-+                This settings defines how IMQ behaves in respect to its
-+                hooking in PREROUTING and POSTROUTING.
-+
-+                Choosing this option will make IMQ hook like this:
-+
-+                PREROUTING:   After NAT
-+                POSTROUTING:  After NAT
-+
-+                More information can be found at: www.linuximq.net
-+
-+                If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_AB
-+        bool "IMQ AB"
-+        help
-+                This settings defines how IMQ behaves in respect to its
-+                hooking in PREROUTING and POSTROUTING.
-+
-+                Choosing this option will make IMQ hook like this:
-+
-+                PREROUTING:   After NAT
-+                POSTROUTING:  Before NAT
-+
-+                More information can be found at: www.linuximq.net
-+
-+                If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_BA
-+        bool "IMQ BA"
-+        help
-+                This settings defines how IMQ behaves in respect to its
-+                hooking in PREROUTING and POSTROUTING.
-+
-+                Choosing this option will make IMQ hook like this:
-+
-+                PREROUTING:   Before NAT
-+                POSTROUTING:  After NAT
-+
-+                More information can be found at: www.linuximq.net
-+
-+                If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_BB
-+        bool "IMQ BB"
-+        help
-+                This settings defines how IMQ behaves in respect to its
-+                hooking in PREROUTING and POSTROUTING.
-+
-+                Choosing this option will make IMQ hook like this:
-+
-+                PREROUTING:   Before NAT
-+                POSTROUTING:  Before NAT
-+
-+                More information can be found at: www.linuximq.net
-+
-+                If not sure leave the default settings alone.
-+
-+endchoice
-+
-+config IMQ_NUM_DEVS
-+
-+        int "Number of IMQ devices"
-+	range 2 8
-+	depends on IMQ
-+        default "2"
-+        help
-+
-+                This settings defines how many IMQ devices will be 
-+		created.
-+
-+		The default value is 2.
-+
-+                More information can be found at: www.linuximq.net
-+
-+                If not sure leave the default settings alone.
-+
- config TUN
- 	tristate "Universal TUN/TAP device driver support"
- 	select CRC32
-diff -Nur linux-2.6.16/drivers/net/Makefile linux-2.6.16-owrt/drivers/net/Makefile
---- linux-2.6.16/drivers/net/Makefile	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/drivers/net/Makefile	2006-03-20 13:00:13.000000000 +0100
-@@ -125,6 +125,7 @@
- endif
- 
- obj-$(CONFIG_DUMMY) += dummy.o
-+obj-$(CONFIG_IMQ) += imq.o
- obj-$(CONFIG_IFB) += ifb.o
- obj-$(CONFIG_DE600) += de600.o
- obj-$(CONFIG_DE620) += de620.o
-diff -Nur linux-2.6.16/include/linux/imq.h linux-2.6.16-owrt/include/linux/imq.h
---- linux-2.6.16/include/linux/imq.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/imq.h	2006-03-20 12:59:23.000000000 +0100
-@@ -0,0 +1,9 @@
-+#ifndef _IMQ_H
-+#define _IMQ_H
-+
-+#define IMQ_MAX_DEVS   16
-+
-+#define IMQ_F_IFMASK   0x7f
-+#define IMQ_F_ENQUEUE  0x80
-+
-+#endif /* _IMQ_H */
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ipt_IMQ.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ipt_IMQ.h
---- linux-2.6.16/include/linux/netfilter_ipv4/ipt_IMQ.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ipt_IMQ.h	2006-03-20 12:59:23.000000000 +0100
-@@ -0,0 +1,8 @@
-+#ifndef _IPT_IMQ_H
-+#define _IPT_IMQ_H
-+
-+struct ipt_imq_info {
-+       unsigned int todev;     /* target imq device */
-+};
-+
-+#endif /* _IPT_IMQ_H */
-diff -Nur linux-2.6.16/include/linux/netfilter_ipv6/ip6t_IMQ.h linux-2.6.16-owrt/include/linux/netfilter_ipv6/ip6t_IMQ.h
---- linux-2.6.16/include/linux/netfilter_ipv6/ip6t_IMQ.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/netfilter_ipv6/ip6t_IMQ.h	2006-03-20 12:59:23.000000000 +0100
-@@ -0,0 +1,8 @@
-+#ifndef _IP6T_IMQ_H
-+#define _IP6T_IMQ_H
-+
-+struct ip6t_imq_info {
-+       unsigned int todev;     /* target imq device */
-+};
-+
-+#endif /* _IP6T_IMQ_H */
-diff -Nur linux-2.6.16/include/linux/skbuff.h linux-2.6.16-owrt/include/linux/skbuff.h
---- linux-2.6.16/include/linux/skbuff.h	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/include/linux/skbuff.h	2006-03-20 12:59:23.000000000 +0100
-@@ -275,6 +275,10 @@
- #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
- 	struct sk_buff		*nfct_reasm;
- #endif
-+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-+	unsigned char           imq_flags;
-+	struct nf_info          *nf_info;
-+#endif
- #ifdef CONFIG_BRIDGE_NETFILTER
- 	struct nf_bridge_info	*nf_bridge;
- #endif
-diff -Nur linux-2.6.16/net/core/skbuff.c linux-2.6.16-owrt/net/core/skbuff.c
---- linux-2.6.16/net/core/skbuff.c	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/net/core/skbuff.c	2006-03-20 12:59:23.000000000 +0100
-@@ -425,6 +425,10 @@
- 	C(nfct_reasm);
- 	nf_conntrack_get_reasm(skb->nfct_reasm);
- #endif
-+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-+	C(imq_flags);
-+	C(nf_info);
-+#endif /*CONFIG_IMQ*/
- #ifdef CONFIG_BRIDGE_NETFILTER
- 	C(nf_bridge);
- 	nf_bridge_get(skb->nf_bridge);
-@@ -489,6 +493,10 @@
- #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
- 	new->ipvs_property = old->ipvs_property;
- #endif
-+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-+	new->imq_flags	= old->imq_flags;
-+	new->nf_info	= old->nf_info;
-+#endif /*CONFIG_IMQ*/
- #ifdef CONFIG_BRIDGE_NETFILTER
- 	new->nf_bridge	= old->nf_bridge;
- 	nf_bridge_get(old->nf_bridge);
-diff -Nur linux-2.6.16/net/ipv4/netfilter/ipt_IMQ.c linux-2.6.16-owrt/net/ipv4/netfilter/ipt_IMQ.c
---- linux-2.6.16/net/ipv4/netfilter/ipt_IMQ.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/ipt_IMQ.c	2006-03-20 12:59:23.000000000 +0100
-@@ -0,0 +1,80 @@
-+/*
-+ * This target marks packets to be enqueued to an imq device
-+ */
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_ipv4/ipt_IMQ.h>
-+#include <linux/imq.h>
-+
-+static unsigned int imq_target(struct sk_buff **pskb,
-+                              const struct net_device *in,
-+                              const struct net_device *out,
-+                              unsigned int hooknum,
-+                              const void *targinfo,
-+                              void *userdata)
-+{
-+       struct ipt_imq_info *mr = (struct ipt_imq_info*)targinfo;
-+
-+       (*pskb)->imq_flags = mr->todev | IMQ_F_ENQUEUE;
-+
-+       return IPT_CONTINUE;
-+}
-+
-+static int imq_checkentry(const char *tablename,
-+                         const struct ipt_entry *e,
-+                         void *targinfo,
-+                         unsigned int targinfosize,
-+                         unsigned int hook_mask)
-+{
-+       struct ipt_imq_info *mr;
-+
-+       if (targinfosize != IPT_ALIGN(sizeof(struct ipt_imq_info))) {
-+               printk(KERN_WARNING "IMQ: invalid targinfosize\n");
-+               return 0;
-+       }
-+       mr = (struct ipt_imq_info*)targinfo;
-+
-+       if (strcmp(tablename, "mangle") != 0) {
-+               printk(KERN_WARNING
-+                      "IMQ: IMQ can only be called from \"mangle\" table, not \"%s\"\n",
-+                      tablename);
-+               return 0;
-+       }
-+
-+       if (mr->todev > IMQ_MAX_DEVS) {
-+               printk(KERN_WARNING
-+                      "IMQ: invalid device specified, highest is %u\n",
-+                      IMQ_MAX_DEVS);
-+               return 0;
-+       }
-+
-+       return 1;
-+}
-+
-+static struct ipt_target ipt_imq_reg = {
-+       .name           = "IMQ",
-+       .target         = imq_target,
-+       .checkentry     = imq_checkentry,
-+       .me             = THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+       if (ipt_register_target(&ipt_imq_reg))
-+               return -EINVAL;
-+
-+       return 0;
-+}
-+
-+static void __exit fini(void)
-+{
-+       ipt_unregister_target(&ipt_imq_reg);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
-+MODULE_AUTHOR("http://www.linuximq.net");
-+MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.6.16/net/ipv4/netfilter/Kconfig linux-2.6.16-owrt/net/ipv4/netfilter/Kconfig
---- linux-2.6.16/net/ipv4/netfilter/Kconfig	2006-03-20 12:58:53.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/Kconfig	2006-03-20 12:59:23.000000000 +0100
-@@ -351,6 +351,17 @@
- 
- 	  To compile it as a module, choose M here.  If unsure, say N.
- 
-+config IP_NF_TARGET_IMQ
-+       tristate "IMQ target support"
-+       depends on IP_NF_MANGLE
-+       help
-+         This option adds a `IMQ' target which is used to specify if and
-+         to which IMQ device packets should get enqueued/dequeued.
-+
-+	 For more information visit: http://www.linuximq.net/
-+
-+         To compile it as a module, choose M here.  If unsure, say N.
-+
- config IP_NF_TARGET_LOG
- 	tristate "LOG target support"
- 	depends on IP_NF_IPTABLES
-diff -Nur linux-2.6.16/net/ipv4/netfilter/Makefile linux-2.6.16-owrt/net/ipv4/netfilter/Makefile
---- linux-2.6.16/net/ipv4/netfilter/Makefile	2006-03-20 12:58:53.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv4/netfilter/Makefile	2006-03-20 13:01:12.000000000 +0100
-@@ -67,6 +67,7 @@
- obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o
- obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
- obj-$(CONFIG_IP_NF_TARGET_DSCP) += ipt_DSCP.o
-+obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o
- obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
- obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
- obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
-diff -Nur linux-2.6.16/net/ipv6/netfilter/ip6t_IMQ.c linux-2.6.16-owrt/net/ipv6/netfilter/ip6t_IMQ.c
---- linux-2.6.16/net/ipv6/netfilter/ip6t_IMQ.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv6/netfilter/ip6t_IMQ.c	2006-03-20 12:59:23.000000000 +0100
-@@ -0,0 +1,80 @@
-+/*
-+ * This target marks packets to be enqueued to an imq device
-+ */
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv6/ip6_tables.h>
-+#include <linux/netfilter_ipv6/ip6t_IMQ.h>
-+#include <linux/imq.h>
-+
-+static unsigned int imq_target(struct sk_buff **pskb,
-+                              unsigned int hooknum,
-+                              const struct net_device *in,
-+                              const struct net_device *out,
-+                              const void *targinfo,
-+                              void *userdata)
-+{
-+       struct ip6t_imq_info *mr = (struct ip6t_imq_info*)targinfo;
-+
-+       (*pskb)->imq_flags = mr->todev | IMQ_F_ENQUEUE;
-+
-+       return IP6T_CONTINUE;
-+}
-+
-+static int imq_checkentry(const char *tablename,
-+                         const struct ip6t_entry *e,
-+                         void *targinfo,
-+                         unsigned int targinfosize,
-+                         unsigned int hook_mask)
-+{
-+       struct ip6t_imq_info *mr;
-+
-+       if (targinfosize != IP6T_ALIGN(sizeof(struct ip6t_imq_info))) {
-+               printk(KERN_WARNING "IMQ: invalid targinfosize\n");
-+               return 0;
-+       }
-+       mr = (struct ip6t_imq_info*)targinfo;
-+
-+       if (strcmp(tablename, "mangle") != 0) {
-+               printk(KERN_WARNING
-+                      "IMQ: IMQ can only be called from \"mangle\" table, not \"%s\"\n",
-+                      tablename);
-+               return 0;
-+       }
-+
-+       if (mr->todev > IMQ_MAX_DEVS) {
-+               printk(KERN_WARNING
-+                      "IMQ: invalid device specified, highest is %u\n",
-+                      IMQ_MAX_DEVS);
-+               return 0;
-+       }
-+
-+       return 1;
-+}
-+
-+static struct ip6t_target ip6t_imq_reg = {
-+       .name           = "IMQ",
-+       .target         = imq_target,
-+       .checkentry     = imq_checkentry,
-+       .me             = THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+       if (ip6t_register_target(&ip6t_imq_reg))
-+               return -EINVAL;
-+
-+       return 0;
-+}
-+
-+static void __exit fini(void)
-+{
-+       ip6t_unregister_target(&ip6t_imq_reg);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
-+MODULE_AUTHOR("http://www.linuximq.net");
-+MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
-+MODULE_LICENSE("GPL");
-diff -Nur linux-2.6.16/net/ipv6/netfilter/Kconfig linux-2.6.16-owrt/net/ipv6/netfilter/Kconfig
---- linux-2.6.16/net/ipv6/netfilter/Kconfig	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv6/netfilter/Kconfig	2006-03-20 12:59:23.000000000 +0100
-@@ -154,6 +154,15 @@
- 
- 	  To compile it as a module, choose M here.  If unsure, say N.
- 
-+config IP6_NF_TARGET_IMQ
-+	tristate "IMQ target support"
-+	depends on IP6_NF_MANGLE
-+	help
-+          This option adds a `IMQ' target which is used to specify if and
-+          to which imq device packets should get enqueued/dequeued.
-+
-+          To compile it as a module, choose M here.  If unsure, say N.
-+
- config IP6_NF_TARGET_LOG
- 	tristate "LOG target support"
- 	depends on IP6_NF_FILTER
-diff -Nur linux-2.6.16/net/ipv6/netfilter/Makefile linux-2.6.16-owrt/net/ipv6/netfilter/Makefile
---- linux-2.6.16/net/ipv6/netfilter/Makefile	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/net/ipv6/netfilter/Makefile	2006-03-20 13:02:14.000000000 +0100
-@@ -4,6 +4,7 @@
- 
- # Link order matters here.
- obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
-+obj-$(CONFIG_IP6_NF_TARGET_IMQ) += ip6t_IMQ.o
- obj-$(CONFIG_IP6_NF_MATCH_RT) += ip6t_rt.o
- obj-$(CONFIG_IP6_NF_MATCH_OPTS) += ip6t_hbh.o ip6t_dst.o
- obj-$(CONFIG_IP6_NF_MATCH_IPV6HEADER) += ip6t_ipv6header.o
-diff -Nur linux-2.6.16/net/sched/sch_generic.c linux-2.6.16-owrt/net/sched/sch_generic.c
---- linux-2.6.16/net/sched/sch_generic.c	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-owrt/net/sched/sch_generic.c	2006-03-20 12:59:23.000000000 +0100
-@@ -29,6 +29,9 @@
- #include <linux/netdevice.h>
- #include <linux/skbuff.h>
- #include <linux/rtnetlink.h>
-+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-+#include <linux/imq.h>
-+#endif
- #include <linux/init.h>
- #include <linux/rcupdate.h>
- #include <linux/list.h>
-@@ -136,7 +139,13 @@
- 
- 			if (!netif_queue_stopped(dev)) {
- 				int ret;
--				if (netdev_nit)
-+
-+                                if (netdev_nit
-+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-+                                  && !(skb->imq_flags & IMQ_F_ENQUEUE)
-+#endif
-+                                  )
-+
- 					dev_queue_xmit_nit(skb, dev);
- 
- 				ret = dev->hard_start_xmit(skb, dev);
diff --git a/openwrt/target/linux/generic-2.6/patches/107-netfilter_nat_sip.patch b/openwrt/target/linux/generic-2.6/patches/107-netfilter_nat_sip.patch
deleted file mode 100644
index 6640118f20..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/107-netfilter_nat_sip.patch
+++ /dev/null
@@ -1,830 +0,0 @@
-diff -urN linux-2.6.16.4/net/ipv4/netfilter/ip_conntrack_sip.c linux-2.6.16.4.new/net/ipv4/netfilter/ip_conntrack_sip.c
---- linux-2.6.16.4/net/ipv4/netfilter/ip_conntrack_sip.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.4.new/net/ipv4/netfilter/ip_conntrack_sip.c	2006-04-12 17:31:44.000000000 +0200
-@@ -0,0 +1,414 @@
-+/* SIP extension for IP connection tracking.
-+ *
-+ * (C) 2005 by Christian Hentschel <chentschel@arnet.com.ar>
-+ * based on RR's ip_conntrack_ftp.c and other modules.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/netfilter.h>
-+#include <linux/ip.h>
-+#include <linux/ctype.h>
-+#include <linux/in.h>
-+#include <linux/udp.h>
-+#include <net/checksum.h>
-+#include <net/udp.h>
-+
-+#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_sip.h>
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Christian Hentschel <chentschel@arnet.com.ar>");
-+MODULE_DESCRIPTION("SIP connection tracking helper");
-+
-+static DEFINE_SPINLOCK(sipbf_lock);
-+
-+
-+#define MAX_PORTS	8
-+static int ports[MAX_PORTS];
-+static int ports_c;
-+module_param_array(ports, int, &ports_c, 0400);
-+MODULE_PARM_DESC(ports, " port numbers of sip servers");
-+
-+static unsigned int sip_timeout = SIP_TIMEOUT;
-+
-+module_param(sip_timeout, int, 0600);
-+MODULE_PARM_DESC(sip_timeout, "timeout for the master sip session");
-+
-+unsigned int (*ip_nat_sip_hook)(struct sk_buff **pskb, 
-+				enum ip_conntrack_info ctinfo,
-+				struct ip_conntrack *ct,
-+				const char **dptr);
-+EXPORT_SYMBOL_GPL(ip_nat_sip_hook);
-+				
-+unsigned int (*ip_nat_sdp_hook)(struct sk_buff **pskb, 
-+				enum ip_conntrack_info ctinfo,
-+				struct ip_conntrack_expect *exp,
-+				const char *dptr);
-+EXPORT_SYMBOL_GPL(ip_nat_sdp_hook);
-+
-+int ct_sip_get_info(const char *dptr, size_t dlen, 
-+				unsigned int *matchoff, 
-+				unsigned int *matchlen, 
-+				struct sip_header_nfo *hnfo);
-+EXPORT_SYMBOL(ct_sip_get_info);
-+
-+#if 0
-+#define DEBUGP printk
-+#else
-+#define DEBUGP(format, args...)
-+#endif
-+
-+static int digits_len(const char *dptr, const char *limit, int *shift);
-+static int epaddr_len(const char *dptr, const char *limit, int *shift);
-+static int skp_digits_len(const char *dptr, const char *limit, int *shift);
-+static int skp_epaddr_len(const char *dptr, const char *limit, int *shift);
-+
-+struct sip_header_nfo ct_sip_hdrs[] = {
-+	{ 	/* Via header */
-+		"Via:",		sizeof("Via:") - 1,
-+		"\r\nv:",	sizeof("\r\nv:") - 1, /* rfc3261 "\r\n" */
-+		"UDP ", 	sizeof("UDP ") - 1,
-+		epaddr_len
-+	},
-+	{ 	/* Contact header */
-+		"Contact:",	sizeof("Contact:") - 1,
-+		"\r\nm:",	sizeof("\r\nm:") - 1,
-+		"sip:",		sizeof("sip:") - 1,
-+		skp_epaddr_len
-+	},
-+	{ 	/* Content length header */
-+		"Content-Length:", sizeof("Content-Length:") - 1,
-+		"\r\nl:",	sizeof("\r\nl:") - 1,
-+		":",		sizeof(":") - 1, 
-+		skp_digits_len
-+	},
-+	{	/* SDP media info */
-+		"\nm=",		sizeof("\nm=") - 1,	
-+		"\rm=",		sizeof("\rm=") - 1,
-+		"audio ",	sizeof("audio ") - 1,
-+		digits_len
-+	},
-+	{ 	/* SDP owner address*/	
-+		"\no=",		sizeof("\no=") - 1, 
-+		"\ro=",		sizeof("\ro=") - 1,
-+		"IN IP4 ",	sizeof("IN IP4 ") - 1,
-+		epaddr_len
-+	},
-+	{ 	/* SDP connection info */
-+		"\nc=",		sizeof("\nc=") - 1, 
-+		"\rc=",		sizeof("\rc=") - 1,
-+		"IN IP4 ",	sizeof("IN IP4 ") - 1,
-+		epaddr_len
-+	},
-+	{ 	/* Requests headers */
-+		"sip:",		sizeof("sip:") - 1,
-+		"sip:",		sizeof("sip:") - 1, /* yes, i know.. ;) */
-+		"@", 		sizeof("@") - 1, 
-+		epaddr_len
-+	},
-+	{ 	/* SDP version header */
-+		"\nv=",		sizeof("\nv=") - 1,
-+		"\rv=",		sizeof("\rv=") - 1,
-+		"=", 		sizeof("=") - 1, 
-+		digits_len
-+	}
-+};
-+EXPORT_SYMBOL(ct_sip_hdrs);
-+
-+
-+static int digits_len(const char *dptr, const char *limit, int *shift)
-+{
-+	int len = 0;	
-+	while (dptr <= limit && isdigit(*dptr)) {
-+		dptr++;
-+		len++;
-+	}
-+	return len;
-+} 
-+
-+/* get digits lenght, skiping blank spaces. */
-+static int skp_digits_len(const char *dptr, const char *limit, int *shift)
-+{
-+	for (; dptr <= limit && *dptr == ' '; dptr++)
-+		(*shift)++;
-+		
-+	return digits_len(dptr, limit, shift);
-+}
-+
-+/* Simple ipaddr parser.. */
-+static int parse_ipaddr(const char *cp,	const char **endp, 
-+			uint32_t *ipaddr, const char *limit)
-+{
-+	unsigned long int val;
-+	int i, digit = 0;
-+	
-+	for (i = 0, *ipaddr = 0; cp <= limit && i < 4; i++) {
-+		digit = 0;
-+		if (!isdigit(*cp))
-+			break;
-+		
-+		val = simple_strtoul(cp, (char **)&cp, 10);
-+		if (val > 0xFF)
-+			return -1;
-+	
-+		((uint8_t *)ipaddr)[i] = val;	
-+		digit = 1;
-+	
-+		if (*cp != '.')
-+			break;
-+		cp++;
-+	}
-+	if (!digit)
-+		return -1;
-+	
-+	if (endp)
-+		*endp = cp;
-+
-+	return 0;
-+}
-+
-+/* skip ip address. returns it lenght. */
-+static int epaddr_len(const char *dptr, const char *limit, int *shift)
-+{
-+	const char *aux = dptr;
-+	uint32_t ip;
-+	
-+	if (parse_ipaddr(dptr, &dptr, &ip, limit) < 0) {
-+		DEBUGP("ip: %s parse failed.!\n", dptr);
-+		return 0;
-+	}
-+
-+	/* Port number */
-+	if (*dptr == ':') {
-+		dptr++;
-+		dptr += digits_len(dptr, limit, shift);
-+	}
-+	return dptr - aux;
-+}
-+
-+/* get address lenght, skiping user info. */
-+static int skp_epaddr_len(const char *dptr, const char *limit, int *shift)
-+{
-+	for (; dptr <= limit && *dptr != '@'; dptr++)
-+		(*shift)++;	
-+	
-+	if (*dptr == '@') {
-+		dptr++;
-+		(*shift)++;
-+		return epaddr_len(dptr, limit, shift);
-+	}	
-+	return  0;
-+}
-+
-+/* Returns 0 if not found, -1 error parsing. */
-+int ct_sip_get_info(const char *dptr, size_t dlen, 
-+		unsigned int *matchoff, 
-+		unsigned int *matchlen,
-+		struct sip_header_nfo *hnfo)
-+{
-+	const char *limit, *aux, *k = dptr;
-+	int shift = 0;
-+	
-+	limit = dptr + (dlen - hnfo->lnlen);
-+
-+	while (dptr <= limit) {
-+		if ((strncmp(dptr, hnfo->lname, hnfo->lnlen) != 0) &&
-+			(strncmp(dptr, hnfo->sname, hnfo->snlen) != 0))
-+		{
-+			dptr++;
-+			continue;
-+		}
-+		aux = ct_sip_search(hnfo->ln_str, dptr, hnfo->ln_strlen, 
-+						ct_sip_lnlen(dptr, limit));
-+		if (!aux) {
-+			DEBUGP("'%s' not found in '%s'.\n", hnfo->ln_str, hnfo->lname);
-+			return -1;
-+		}
-+		aux += hnfo->ln_strlen;
-+		
-+		*matchlen = hnfo->match_len(aux, limit, &shift);
-+		if (!*matchlen)
-+			return -1;
-+
-+		*matchoff = (aux - k) + shift; 
-+		
-+		DEBUGP("%s match succeeded! - len: %u\n", hnfo->lname, *matchlen);
-+		return 1;
-+	}
-+	DEBUGP("%s header not found.\n", hnfo->lname);
-+	return 0;
-+}
-+
-+static int set_expected_rtp(struct sk_buff **pskb, 
-+			struct ip_conntrack *ct,
-+			enum ip_conntrack_info ctinfo, 
-+			uint32_t ipaddr, uint16_t port,
-+			const char *dptr)
-+{
-+	struct ip_conntrack_expect *exp;
-+	int ret;
-+	
-+	exp = ip_conntrack_expect_alloc(ct);
-+	if (exp == NULL)
-+		return NF_DROP;
-+
-+	exp->tuple = ((struct ip_conntrack_tuple)
-+		{ { ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.ip, { 0 } },
-+		  { ipaddr, { .udp = { htons(port) } }, IPPROTO_UDP }});
-+		  
-+	exp->mask = ((struct ip_conntrack_tuple) 
-+		{ { 0xFFFFFFFF, { 0 } },
-+		  { 0xFFFFFFFF, { .udp = { 0xFFFF } }, 0xFF }});
-+	
-+	exp->expectfn = NULL;
-+	
-+	if (ip_nat_sdp_hook)
-+		ret = ip_nat_sdp_hook(pskb, ctinfo, exp, dptr);
-+	else {
-+		if (ip_conntrack_expect_related(exp) != 0)
-+			ret = NF_DROP;
-+		else
-+			ret = NF_ACCEPT;
-+	}
-+	ip_conntrack_expect_put(exp);
-+
-+	return ret;
-+}
-+
-+static int sip_help(struct sk_buff **pskb,
-+		struct ip_conntrack *ct,
-+		enum ip_conntrack_info ctinfo)
-+{
-+	unsigned int dataoff, datalen;
-+	const char *dptr;
-+	int ret = NF_ACCEPT;
-+	int matchoff, matchlen;
-+	uint32_t ipaddr;
-+	uint16_t port;
-+	
-+	/* No Data ? */ 
-+	dataoff = (*pskb)->nh.iph->ihl*4 + sizeof(struct udphdr);
-+	if (dataoff >= (*pskb)->len) {
-+		DEBUGP("skb->len = %u\n", (*pskb)->len);
-+		return NF_ACCEPT;
-+        }
-+        
-+	ip_ct_refresh(ct, *pskb, sip_timeout * HZ);
-+		
-+	spin_lock_bh(&sipbf_lock);
-+	
-+	if ((dataoff + (*pskb)->len - dataoff) <= skb_headlen(*pskb))
-+		dptr = (*pskb)->data + dataoff;
-+	else {
-+		DEBUGP("Copy of skbuff not supported yet.\n");
-+		goto out;
-+	}
-+	
-+	if (ip_nat_sip_hook) {
-+		if (!ip_nat_sip_hook(pskb, ctinfo, ct, &dptr)) {
-+			ret = NF_DROP;
-+			goto out;
-+		}
-+	}
-+	
-+	if ((ctinfo) >= IP_CT_IS_REPLY)
-+		goto out;
-+
-+	/* After this point NAT, could have mangled skb, so 
-+	   we need to recalculate payload lenght. */
-+	datalen = (*pskb)->len - dataoff;
-+
-+	if (datalen < (sizeof("SIP/2.0 200") - 1))
-+		goto out;
-+	
-+	/* RTP info only in some SDP pkts */
-+	if (memcmp(dptr, "INVITE", sizeof("INVITE") - 1) != 0 && 
-+	    memcmp(dptr, "SIP/2.0 200", sizeof("SIP/2.0 200") - 1) != 0) {
-+		goto out;
-+	}
-+	/* Get ip and port address from SDP packet. */
-+	if (ct_sip_get_info(dptr, datalen, &matchoff, &matchlen, 
-+	    &ct_sip_hdrs[POS_CONECTION]) > 0) {
-+
-+		/* We'll drop only if there are parse problems. */
-+		if (parse_ipaddr(dptr + matchoff, NULL, &ipaddr, 
-+		    dptr + datalen) < 0) {
-+			ret = NF_DROP;
-+			goto out;
-+		}
-+		if (ct_sip_get_info(dptr, datalen, &matchoff, &matchlen, 
-+		    &ct_sip_hdrs[POS_MEDIA]) > 0) {
-+
-+			port = simple_strtoul(dptr + matchoff, NULL, 10);
-+			if (port < 1024) {
-+				ret = NF_DROP;
-+				goto out;
-+			}
-+			ret = set_expected_rtp(pskb, ct, ctinfo,
-+						ipaddr, port, dptr);
-+		}
-+	}
-+out:	spin_unlock_bh(&sipbf_lock);
-+	return ret;
-+}
-+
-+static struct ip_conntrack_helper sip[MAX_PORTS];
-+static char sip_names[MAX_PORTS][10];
-+
-+static void fini(void)
-+{
-+	int i = 0;
-+	for (; i < ports_c; i++) {
-+		DEBUGP("unregistering helper for port %d\n", ports[i]);
-+		ip_conntrack_helper_unregister(&sip[i]);
-+	} 
-+}
-+
-+static int __init init(void)
-+{
-+	int i, ret;
-+	char *tmpname;
-+
-+	if (ports_c == 0)
-+		ports[ports_c++] = SIP_PORT;
-+
-+	for (i = 0; i < ports_c; i++) {
-+		/* Create helper structure */
-+		memset(&sip[i], 0, sizeof(struct ip_conntrack_helper));
-+
-+		sip[i].tuple.dst.protonum = IPPROTO_UDP;
-+		sip[i].tuple.src.u.udp.port = htons(ports[i]);
-+		sip[i].mask.src.u.udp.port = 0xFFFF;
-+		sip[i].mask.dst.protonum = 0xFF;
-+		sip[i].max_expected = 1;
-+		sip[i].timeout = 3 * 60; /* 3 minutes */
-+		sip[i].me = THIS_MODULE;
-+		sip[i].help = sip_help;
-+
-+		tmpname = &sip_names[i][0];
-+		if (ports[i] == SIP_PORT)
-+			sprintf(tmpname, "sip");
-+		else
-+			sprintf(tmpname, "sip-%d", i);
-+		sip[i].name = tmpname;
-+
-+		DEBUGP("port #%d: %d\n", i, ports[i]);
-+
-+		ret=ip_conntrack_helper_register(&sip[i]);
-+		if (ret) {
-+			printk("ERROR registering helper for port %d\n",
-+				ports[i]);
-+			fini();
-+			return(ret);
-+		}
-+	}
-+	return(0);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux-2.6.16.4/net/ipv4/netfilter/ip_nat_sip.c linux-2.6.16.4.new/net/ipv4/netfilter/ip_nat_sip.c
---- linux-2.6.16.4/net/ipv4/netfilter/ip_nat_sip.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.4.new/net/ipv4/netfilter/ip_nat_sip.c	2006-04-12 17:31:53.000000000 +0200
-@@ -0,0 +1,249 @@
-+/* SIP extension for UDP NAT alteration.
-+ *
-+ * (C) 2005 by Christian Hentschel <chentschel@arnet.com.ar>
-+ * based on RR's ip_nat_ftp.c and other modules.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/netfilter_ipv4.h>
-+#include <linux/ip.h>
-+#include <linux/udp.h>
-+#include <net/udp.h>
-+
-+#include <linux/netfilter_ipv4/ip_nat.h>
-+#include <linux/netfilter_ipv4/ip_nat_helper.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_sip.h>
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Christian Hentschel <chentschel@arnet.com.ar>");
-+MODULE_DESCRIPTION("SIP NAT helper");
-+
-+#if 0
-+#define DEBUGP printk
-+#else
-+#define DEBUGP(format, args...)
-+#endif
-+
-+extern struct sip_header_nfo ct_sip_hdrs[];
-+
-+static unsigned int mangle_sip_packet(struct sk_buff **pskb, 
-+			enum ip_conntrack_info ctinfo,
-+			struct ip_conntrack *ct, 
-+			const char **dptr, size_t dlen,
-+			char *buffer, int bufflen,
-+			struct sip_header_nfo *hnfo)
-+{
-+	unsigned int matchlen, matchoff;
-+	
-+	if (ct_sip_get_info(*dptr, dlen, &matchoff, &matchlen, hnfo) <= 0)
-+		return 0;
-+
-+	if (!ip_nat_mangle_udp_packet(pskb, ct, ctinfo, 
-+	    matchoff, matchlen, buffer, bufflen)) {
-+		return 0;
-+	}
-+	/* We need to reload this. Thanks Patrick. */
-+	*dptr = (*pskb)->data + (*pskb)->nh.iph->ihl*4 + sizeof(struct udphdr); 
-+	return 1;
-+}
-+
-+static unsigned int ip_nat_sip(struct sk_buff **pskb, 
-+			enum ip_conntrack_info ctinfo,
-+			struct ip_conntrack *ct,
-+			const char **dptr)
-+{
-+	char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")];	
-+	unsigned int bufflen, dataoff;
-+	uint32_t ip;
-+	uint16_t port;
-+	
-+	dataoff = (*pskb)->nh.iph->ihl*4 + sizeof(struct udphdr);
-+	
-+	if ((ctinfo) >= IP_CT_IS_REPLY) {
-+		ip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-+		port = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.udp.port;
-+	} else {
-+		ip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-+		port = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u.udp.port;
-+	}
-+	bufflen = sprintf(buffer, "%u.%u.%u.%u:%u", NIPQUAD(ip), ntohs(port));
-+	
-+	/* short packet ? */
-+	if (((*pskb)->len - dataoff) < (sizeof("SIP/2.0") - 1))
-+		return 0;
-+	
-+	/* Basic rules: requests and responses. */
-+	if (memcmp(*dptr, "SIP/2.0", sizeof("SIP/2.0") - 1) == 0) {
-+	
-+		if ((ctinfo) < IP_CT_IS_REPLY) {
-+			mangle_sip_packet(pskb, ctinfo, ct, dptr, 
-+				(*pskb)->len - dataoff, buffer, bufflen,
-+				&ct_sip_hdrs[POS_CONTACT]);
-+			return 1;
-+		}
-+
-+		if (!mangle_sip_packet(pskb, ctinfo, ct, dptr, (*pskb)->len - dataoff,
-+		    buffer, bufflen, &ct_sip_hdrs[POS_VIA])) {
-+			return 0;
-+		}
-+		
-+		/* This search should ignore case, but later.. */
-+		const char *aux = ct_sip_search("CSeq:", *dptr, sizeof("CSeq:") - 1, 
-+								(*pskb)->len - dataoff);
-+		if (!aux)
-+			return 0;
-+		
-+		if (!ct_sip_search("REGISTER", aux, sizeof("REGISTER"), 
-+		    ct_sip_lnlen(aux, *dptr + (*pskb)->len - dataoff))) {
-+			return 1;
-+		}
-+		return mangle_sip_packet(pskb, ctinfo, ct, dptr, (*pskb)->len - dataoff, 
-+						buffer, bufflen, &ct_sip_hdrs[POS_CONTACT]);
-+	}
-+	if ((ctinfo) < IP_CT_IS_REPLY) {
-+		if (!mangle_sip_packet(pskb, ctinfo, ct, dptr, (*pskb)->len - dataoff,
-+		    buffer, bufflen, &ct_sip_hdrs[POS_VIA])) {
-+			return 0;
-+		}
-+		
-+		/* Mangle Contact if exists only. - watch udp_nat_mangle()! */
-+		mangle_sip_packet(pskb, ctinfo, ct, dptr, (*pskb)->len - dataoff, 
-+						buffer, bufflen, &ct_sip_hdrs[POS_CONTACT]);
-+		return 1;
-+	}
-+	/* This mangle requests headers. */
-+	return mangle_sip_packet(pskb, ctinfo, ct, dptr, 
-+			ct_sip_lnlen(*dptr, *dptr + (*pskb)->len - dataoff),
-+			buffer, bufflen, &ct_sip_hdrs[POS_REQ_HEADER]);
-+}
-+
-+static int mangle_content_len(struct sk_buff **pskb, 
-+			enum ip_conntrack_info ctinfo,
-+			struct ip_conntrack *ct,
-+			const char *dptr)
-+{
-+	unsigned int dataoff, matchoff, matchlen;
-+	char buffer[sizeof("65536")];
-+	int bufflen;
-+	
-+	dataoff = (*pskb)->nh.iph->ihl*4 + sizeof(struct udphdr);
-+	
-+	/* Get actual SDP lenght */
-+	if (ct_sip_get_info(dptr, (*pskb)->len - dataoff, &matchoff, 
-+	    &matchlen, &ct_sip_hdrs[POS_SDP_HEADER]) > 0) {
-+		
-+		/* since ct_sip_get_info() give us a pointer passing 'v='
-+		   we need to add 2 bytes in this count. */
-+		int c_len = (*pskb)->len - dataoff - matchoff + 2;
-+		
-+		/* Now, update SDP lenght */
-+		if (ct_sip_get_info(dptr, (*pskb)->len - dataoff, &matchoff, 
-+		    &matchlen, &ct_sip_hdrs[POS_CONTENT]) > 0) {
-+		    
-+			bufflen = sprintf(buffer, "%u", c_len);
-+			
-+			return ip_nat_mangle_udp_packet(pskb, ct, ctinfo, matchoff,
-+							matchlen, buffer, bufflen);
-+		}
-+	}
-+	return 0;
-+}
-+
-+static unsigned int mangle_sdp(struct sk_buff **pskb, 
-+			enum ip_conntrack_info ctinfo,
-+			struct ip_conntrack *ct,
-+			uint32_t newip, uint16_t port,
-+			const char *dptr)
-+{
-+	char buffer[sizeof("nnn.nnn.nnn.nnn")];
-+	unsigned int dataoff, bufflen;
-+
-+	dataoff = (*pskb)->nh.iph->ihl*4 + sizeof(struct udphdr);
-+	
-+	/* Mangle owner and contact info. */
-+	bufflen = sprintf(buffer, "%u.%u.%u.%u", NIPQUAD(newip));
-+	if (!mangle_sip_packet(pskb, ctinfo, ct, &dptr, (*pskb)->len - dataoff,
-+	    buffer, bufflen, &ct_sip_hdrs[POS_OWNER])) {
-+		return 0;	
-+	}
-+	
-+	if (!mangle_sip_packet(pskb, ctinfo, ct, &dptr, (*pskb)->len - dataoff,
-+	    buffer, bufflen, &ct_sip_hdrs[POS_CONECTION])) {
-+		return 0;
-+	}
-+	
-+	/* Mangle media port. */
-+	bufflen = sprintf(buffer, "%u", port);
-+	if (!mangle_sip_packet(pskb, ctinfo, ct, &dptr, (*pskb)->len - dataoff,
-+	    buffer, bufflen, &ct_sip_hdrs[POS_MEDIA])) {
-+		return 0;
-+	}
-+	
-+	return mangle_content_len(pskb, ctinfo, ct, dptr);
-+}
-+
-+/* So, this packet has hit the connection tracking matching code.
-+   Mangle it, and change the expectation to match the new version. */
-+static unsigned int ip_nat_sdp(struct sk_buff **pskb, 
-+			enum ip_conntrack_info ctinfo,
-+			struct ip_conntrack_expect *exp,
-+			const char *dptr)
-+{
-+	struct ip_conntrack *ct = exp->master;
-+	uint32_t newip;
-+	uint16_t port;
-+	
-+	DEBUGP("ip_nat_sdp():\n");
-+
-+	/* Connection will come from reply */
-+	newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-+	
-+	exp->tuple.dst.ip = newip;
-+	exp->saved_proto.udp.port = exp->tuple.dst.u.udp.port;
-+	exp->dir = IP_CT_DIR_REPLY;
-+
-+	/* When you see the packet, we need to NAT it the same as the
-+	   this one. */
-+	exp->expectfn = ip_nat_follow_master;
-+
-+	/* Try to get same port: if not, try to change it. */
-+	for (port = ntohs(exp->saved_proto.udp.port); port != 0; port++) {
-+		exp->tuple.dst.u.udp.port = htons(port);
-+		if (ip_conntrack_expect_related(exp) == 0)
-+			break;
-+	}
-+	
-+	if (port == 0)
-+		return NF_DROP;
-+	
-+	if (!mangle_sdp(pskb, ctinfo, ct, newip, port, dptr)) {
-+		ip_conntrack_unexpect_related(exp);
-+		return NF_DROP;
-+	}
-+	return NF_ACCEPT;
-+}
-+
-+static void __exit fini(void)
-+{
-+	ip_nat_sip_hook = NULL;
-+	ip_nat_sdp_hook = NULL;
-+	/* Make sure noone calls it, meanwhile. */
-+	synchronize_net();
-+}
-+
-+static int __init init(void)
-+{
-+	BUG_ON(ip_nat_sip_hook);
-+	BUG_ON(ip_nat_sdp_hook);
-+	ip_nat_sip_hook = ip_nat_sip;
-+	ip_nat_sdp_hook = ip_nat_sdp;
-+	return 0;
-+}
-+
-+module_init(init);
-+module_exit(fini);
-diff -urN linux-2.6.16.4/net/ipv4/netfilter/Kconfig linux-2.6.16.4.new/net/ipv4/netfilter/Kconfig
---- linux-2.6.16.4/net/ipv4/netfilter/Kconfig	2006-04-12 17:29:19.000000000 +0200
-+++ linux-2.6.16.4.new/net/ipv4/netfilter/Kconfig	2006-04-12 17:32:53.000000000 +0200
-@@ -168,6 +168,19 @@
- 	  If you want to compile it as a module, say M here and read
- 	  Documentation/modules.txt.  If unsure, say `N'.
- 
-+config IP_NF_SIP
-+	tristate  'SIP support'
-+	depends on IP_NF_CONNTRACK
-+	help
-+	  SIP is an application-layer control protocol that can establish,
-+   	  modify, and terminate multimedia sessions (conferences) such as
-+   	  Internet telephony calls. With the ip_conntrack_sip and
-+	  the ip_nat_sip modules you can support the protocol on a connection
-+	  tracking/NATing firewall.
-+	
-+	  If you want to compile it as a module, say 'M' here and read
-+	  Documentation/modules.txt.  If unsure, say 'N'.
-+
- config IP_NF_QUEUE
- 	tristate "IP Userspace queueing via NETLINK (OBSOLETE)"
- 	help
-@@ -545,6 +558,12 @@
- 	default IP_NF_NAT if IP_NF_PPTP=y
- 	default m if IP_NF_PPTP=m
- 
-+config IP_NF_NAT_SIP
-+	tristate
-+	depends on IP_NF_CONNTRACK!=n && IP_NF_NAT!=n
-+	default IP_NF_NAT if IP_NF_SIP=y
-+	default m if IP_NF_SIP=m
-+
- # mangle + specific targets
- config IP_NF_MANGLE
- 	tristate "Packet mangling"
-diff -urN linux-2.6.16.4/net/ipv4/netfilter/Makefile linux-2.6.16.4.new/net/ipv4/netfilter/Makefile
---- linux-2.6.16.4/net/ipv4/netfilter/Makefile	2006-04-12 17:29:19.000000000 +0200
-+++ linux-2.6.16.4.new/net/ipv4/netfilter/Makefile	2006-04-12 17:33:39.000000000 +0200
-@@ -28,6 +28,7 @@
- obj-$(CONFIG_IP_NF_FTP) += ip_conntrack_ftp.o
- obj-$(CONFIG_IP_NF_IRC) += ip_conntrack_irc.o
- obj-$(CONFIG_IP_NF_NETBIOS_NS) += ip_conntrack_netbios_ns.o
-+obj-$(CONFIG_IP_NF_SIP) += ip_conntrack_sip.o
- 
- # NAT helpers 
- obj-$(CONFIG_IP_NF_NAT_PPTP) += ip_nat_pptp.o
-@@ -35,6 +36,7 @@
- obj-$(CONFIG_IP_NF_NAT_TFTP) += ip_nat_tftp.o
- obj-$(CONFIG_IP_NF_NAT_FTP) += ip_nat_ftp.o
- obj-$(CONFIG_IP_NF_NAT_IRC) += ip_nat_irc.o
-+obj-$(CONFIG_IP_NF_NAT_SIP) += ip_nat_sip.o
- 
- # generic IP tables 
- obj-$(CONFIG_IP_NF_IPTABLES) += ip_tables.o
-diff -urN linux-2.6.16.4/include/linux/netfilter_ipv4/ip_conntrack.h linux-2.6.16.4.new/include/linux/netfilter_ipv4/ip_conntrack.h
---- linux-2.6.16.4/include/linux/netfilter_ipv4/ip_conntrack.h	2006-04-12 17:29:19.000000000 +0200
-+++ linux-2.6.16.4.new/include/linux/netfilter_ipv4/ip_conntrack.h	2006-04-12 17:30:38.000000000 +0200
-@@ -33,6 +33,7 @@
- #include <linux/netfilter_ipv4/ip_conntrack_amanda.h>
- #include <linux/netfilter_ipv4/ip_conntrack_ftp.h>
- #include <linux/netfilter_ipv4/ip_conntrack_irc.h>
-+#include <linux/netfilter_ipv4/ip_conntrack_sip.h>
- 
- /* per conntrack: application helper private data */
- union ip_conntrack_help {
-@@ -40,6 +41,7 @@
- 	struct ip_ct_pptp_master ct_pptp_info;
- 	struct ip_ct_ftp_master ct_ftp_info;
- 	struct ip_ct_irc_master ct_irc_info;
-+	struct ip_ct_sip_master ct_sip_info;
- };
- 
- #ifdef CONFIG_IP_NF_NAT_NEEDED
-diff -urN linux-2.6.16.4/include/linux/netfilter_ipv4/ip_conntrack_sip.h linux-2.6.16.4.new/include/linux/netfilter_ipv4/ip_conntrack_sip.h
---- linux-2.6.16.4/include/linux/netfilter_ipv4/ip_conntrack_sip.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.4.new/include/linux/netfilter_ipv4/ip_conntrack_sip.h	2006-04-12 17:31:12.000000000 +0200
-@@ -0,0 +1,81 @@
-+#ifndef __IP_CONNTRACK_SIP_H__
-+#define __IP_CONNTRACK_SIP_H__
-+/* SIP tracking. */
-+
-+#ifdef __KERNEL__
-+
-+#define SIP_PORT	5060
-+#define SIP_TIMEOUT	3600
-+
-+#define POS_VIA		0
-+#define POS_CONTACT	1
-+#define POS_CONTENT	2
-+#define POS_MEDIA	3
-+#define POS_OWNER	4
-+#define POS_CONECTION	5
-+#define POS_REQ_HEADER	6
-+#define POS_SDP_HEADER	7
-+
-+struct ip_ct_sip_master {
-+};
-+
-+struct sip_header_nfo {
-+	const char *lname;
-+	size_t lnlen;
-+	const char *sname;
-+	size_t snlen;
-+	const char *ln_str;
-+	size_t ln_strlen;
-+	int (*match_len)(const char *, const char *, int *);
-+
-+};
-+
-+extern unsigned int (*ip_nat_sip_hook)(struct sk_buff **pskb, 
-+				enum ip_conntrack_info ctinfo,
-+				struct ip_conntrack *ct,
-+				const char **dptr);
-+				
-+/* For NAT to hook in when on expect. */
-+extern unsigned int (*ip_nat_sdp_hook)(struct sk_buff **pskb, 
-+				enum ip_conntrack_info ctinfo,
-+				struct ip_conntrack_expect *exp,
-+				const char *dptr);
-+
-+extern int ct_sip_get_info(const char *dptr, size_t dlen, 
-+				unsigned int *matchoff, 
-+				unsigned int *matchlen, 
-+				struct sip_header_nfo *hnfo);
-+
-+/* get line lenght until first CR or LF seen. */
-+static __inline__ int ct_sip_lnlen(const char *line, const char *limit)
-+{
-+        const char *k = line;
-+
-+        while ((line <= limit) && (*line == '\r' || *line == '\n'))
-+                line++;
-+
-+        while (line <= limit) {
-+                if (*line == '\r' || *line == '\n')
-+                        break;
-+                line++;
-+        }
-+        return line - k;
-+}
-+
-+/* Linear string search, case sensitive. */
-+static __inline__ 
-+const char *ct_sip_search(const char *needle, const char *haystack, 
-+			size_t needle_len, size_t haystack_len) 
-+{
-+	const char *limit = haystack + (haystack_len - needle_len);
-+
-+	while (haystack <= limit) {
-+		if (memcmp(haystack, needle, needle_len) == 0)
-+			return haystack;
-+		haystack++;
-+	}
-+	return NULL;
-+}
-+#endif /* __KERNEL__ */
-+
-+#endif /* __IP_CONNTRACK_SIP_H__ */
diff --git a/openwrt/target/linux/generic-2.6/patches/200-sched_esfq.patch b/openwrt/target/linux/generic-2.6/patches/200-sched_esfq.patch
deleted file mode 100644
index 8790bad2bf..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/200-sched_esfq.patch
+++ /dev/null
@@ -1,730 +0,0 @@
-diff -Naur linux-2.6.15.1.orig/include/linux/pkt_sched.h linux-2.6.15.1/include/linux/pkt_sched.h
---- linux-2.6.15.1.orig/include/linux/pkt_sched.h	2006-01-14 22:16:02.000000000 -0800
-+++ linux-2.6.15.1/include/linux/pkt_sched.h	2006-01-30 16:02:32.000000000 -0800
-@@ -146,8 +146,35 @@
-  *
-  *	The only reason for this is efficiency, it is possible
-  *	to change these parameters in compile time.
-+ *	
-+ *	If you need to play with these values use esfq instead.
-  */
- 
-+/* ESFQ section */
-+
-+enum
-+{
-+        /* traditional */
-+	TCA_SFQ_HASH_CLASSIC,
-+	TCA_SFQ_HASH_DST,
-+	TCA_SFQ_HASH_SRC,
-+	TCA_SFQ_HASH_FWMARK,
-+        /* direct */
-+	TCA_SFQ_HASH_DSTDIR,
-+	TCA_SFQ_HASH_SRCDIR,
-+	TCA_SFQ_HASH_FWMARKDIR,
-+};
-+
-+struct tc_esfq_qopt
-+{
-+	unsigned	quantum;	/* Bytes per round allocated to flow */
-+	int		perturb_period;	/* Period of hash perturbation */
-+	__u32		limit;		/* Maximal packets in queue */
-+	unsigned	divisor;	/* Hash divisor  */
-+	unsigned	flows;		/* Maximal number of flows  */
-+	unsigned	hash_kind;	/* Hash function to use for flow identification */
-+};
-+
- /* RED section */
- 
- enum
-diff -Naur linux-2.6.15.1.orig/net/sched/Kconfig linux-2.6.15.1/net/sched/Kconfig
---- linux-2.6.15.1.orig/net/sched/Kconfig	2006-01-14 22:16:02.000000000 -0800
-+++ linux-2.6.15.1/net/sched/Kconfig	2006-01-30 16:02:32.000000000 -0800
-@@ -185,6 +185,28 @@
- 	  To compile this code as a module, choose M here: the
- 	  module will be called sch_sfq.
- 
-+config NET_SCH_ESFQ
-+	tristate "ESFQ queue"
-+	depends on NET_SCHED
-+	---help---
-+	  Say Y here if you want to use the Enhanced Stochastic Fairness
-+	  Queueing (ESFQ) packet scheduling algorithm for some of your network
-+	  devices or as a leaf discipline for a classful qdisc such as HTB or
-+	  CBQ (see the top of <file:net/sched/sch_esfq.c> for details and
-+	  references to the SFQ algorithm).
-+	  
-+	  This is an enchanced SFQ version which allows you to control some
-+	  hardcoded values in the SFQ scheduler: queue depth, hash table size,
-+	  and queues limit.
-+	  
-+	  ESFQ also adds control to the hash function used to identify packet
-+	  flows. The original SFQ hashes by individual flow (TCP session or UDP
-+	  stream); ESFQ can hash by src or dst IP as well, which can be more
-+	  fair to users in some networking situations.
-+	  
-+	  To compile this code as a module, choose M here: the
-+	  module will be called sch_esfq.
-+
- config NET_SCH_TEQL
- 	tristate "True Link Equalizer (TEQL)"
- 	---help---
-diff -Naur linux-2.6.15.1.orig/net/sched/Makefile linux-2.6.15.1/net/sched/Makefile
---- linux-2.6.15.1.orig/net/sched/Makefile	2006-01-14 22:16:02.000000000 -0800
-+++ linux-2.6.15.1/net/sched/Makefile	2006-01-30 16:02:32.000000000 -0800
-@@ -23,6 +23,7 @@
- obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ingress.o 
- obj-$(CONFIG_NET_SCH_DSMARK)	+= sch_dsmark.o
- obj-$(CONFIG_NET_SCH_SFQ)	+= sch_sfq.o
-+obj-$(CONFIG_NET_SCH_ESFQ)	+= sch_esfq.o
- obj-$(CONFIG_NET_SCH_TBF)	+= sch_tbf.o
- obj-$(CONFIG_NET_SCH_TEQL)	+= sch_teql.o
- obj-$(CONFIG_NET_SCH_PRIO)	+= sch_prio.o
-diff -Naur linux-2.6.15.1.orig/net/sched/sch_esfq.c linux-2.6.15.1/net/sched/sch_esfq.c
---- linux-2.6.15.1.orig/net/sched/sch_esfq.c	1969-12-31 16:00:00.000000000 -0800
-+++ linux-2.6.15.1/net/sched/sch_esfq.c	2006-01-30 16:12:29.000000000 -0800
-@@ -0,0 +1,644 @@
-+/*
-+ * net/sched/sch_esfq.c	Extended Stochastic Fairness Queueing discipline.
-+ *
-+ *		This program is free software; you can redistribute it and/or
-+ *		modify it under the terms of the GNU General Public License
-+ *		as published by the Free Software Foundation; either version
-+ *		2 of the License, or (at your option) any later version.
-+ *
-+ * Authors:	Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
-+ *
-+ * Changes:	Alexander Atanasov, <alex@ssi.bg>
-+ *		Added dynamic depth,limit,divisor,hash_kind options.
-+ *		Added dst and src hashes.
-+ *
-+ * 		Alexander Clouter, <alex@digriz.org.uk>
-+ *		Ported ESFQ to Linux 2.6.
-+ *
-+ * 		Corey Hickey, <bugfood-c@fatooh.org>
-+ *		Maintenance of the Linux 2.6 port.
-+ *		Added fwmark hash (thanks to Robert Kurjata)
-+ *		Added direct hashing for src, dst, and fwmark.
-+ *		
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <asm/uaccess.h>
-+#include <asm/system.h>
-+#include <linux/bitops.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/jiffies.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/socket.h>
-+#include <linux/sockios.h>
-+#include <linux/in.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/if_ether.h>
-+#include <linux/inet.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/notifier.h>
-+#include <linux/init.h>
-+#include <net/ip.h>
-+#include <linux/ipv6.h>
-+#include <net/route.h>
-+#include <linux/skbuff.h>
-+#include <net/sock.h>
-+#include <net/pkt_sched.h>
-+
-+
-+/*	Stochastic Fairness Queuing algorithm.
-+	For more comments look at sch_sfq.c.
-+	The difference is that you can change limit, depth,
-+	hash table size and choose 7 hash types.
-+	
-+	classic:	same as in sch_sfq.c
-+	dst:		destination IP address
-+	src:		source IP address
-+	fwmark:         netfilter mark value
-+	dst_direct:
-+	src_direct:
-+	fwmark_direct:  direct hashing of the above sources
-+	
-+	TODO: 
-+		make sfq_change work.
-+*/
-+
-+
-+/* This type should contain at least SFQ_DEPTH*2 values */
-+typedef unsigned int esfq_index;
-+
-+struct esfq_head
-+{
-+	esfq_index	next;
-+	esfq_index	prev;
-+};
-+
-+struct esfq_sched_data
-+{
-+/* Parameters */
-+	int		perturb_period;
-+	unsigned	quantum;	/* Allotment per round: MUST BE >= MTU */
-+	int		limit;
-+	unsigned	depth;
-+	unsigned	hash_divisor;
-+	unsigned	hash_kind;
-+/* Variables */
-+	struct timer_list perturb_timer;
-+	int		perturbation;
-+	esfq_index	tail;		/* Index of current slot in round */
-+	esfq_index	max_depth;	/* Maximal depth */
-+
-+	esfq_index	*ht;			/* Hash table */
-+	esfq_index	*next;			/* Active slots link */
-+	short		*allot;			/* Current allotment per slot */
-+	unsigned short	*hash;			/* Hash value indexed by slots */
-+	struct sk_buff_head	*qs;		/* Slot queue */
-+	struct esfq_head	*dep;		/* Linked list of slots, indexed by depth */
-+	unsigned	dyn_min;	/* For dynamic divisor adjustment; minimum value seen */
-+	unsigned	dyn_max;	/*                                 maximum value seen */
-+	unsigned	dyn_range;	/*	        		   saved range */
-+};
-+
-+static __inline__ unsigned esfq_hash_u32(struct esfq_sched_data *q,u32 h)
-+{
-+	int pert = q->perturbation;
-+
-+	if (pert)
-+		h = (h<<pert) ^ (h>>(0x1F - pert));
-+
-+	h = ntohl(h) * 2654435761UL;
-+	return h & (q->hash_divisor-1);
-+}
-+
-+/* Hash input values directly into the "nearest" slot, taking into account the
-+ * range of input values seen. This is most useful when the hash table is at
-+ * least as large as the range of possible values. */
-+static __inline__ unsigned esfq_hash_direct(struct esfq_sched_data *q, u32 h)
-+{
-+	/* adjust minimum and maximum */
-+	if (h < q->dyn_min || h > q->dyn_max) {
-+		q->dyn_min = h < q->dyn_min ? h : q->dyn_min;
-+		q->dyn_max = h > q->dyn_max ? h : q->dyn_max;
-+	
-+		/* find new range */
-+		if ((q->dyn_range = q->dyn_max - q->dyn_min) >= q->hash_divisor)
-+			printk(KERN_WARNING "ESFQ: (direct hash) Input range %u is larger than hash "
-+					"table. See ESFQ README for details.\n", q->dyn_range);
-+	}
-+	
-+	/* hash input values into slot numbers */
-+	if (q->dyn_min == q->dyn_max)
-+		return 0; /* only one value seen; avoid division by 0 */
-+	else
-+		return (h - q->dyn_min) * (q->hash_divisor - 1) / q->dyn_range;
-+}
-+
-+static __inline__ unsigned esfq_fold_hash_classic(struct esfq_sched_data *q, u32 h, u32 h1)
-+{
-+	int pert = q->perturbation;
-+
-+	/* Have we any rotation primitives? If not, WHY? */
-+	h ^= (h1<<pert) ^ (h1>>(0x1F - pert));
-+	h ^= h>>10;
-+	return h & (q->hash_divisor-1);
-+}
-+
-+static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb)
-+{
-+	u32 h, h2;
-+	u32 hs;
-+	u32 nfm;
-+
-+	switch (skb->protocol) {
-+	case __constant_htons(ETH_P_IP):
-+	{
-+		struct iphdr *iph = skb->nh.iph;
-+		h = iph->daddr;
-+		hs = iph->saddr;
-+		nfm = skb->nfmark;
-+		h2 = hs^iph->protocol;
-+		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
-+		    (iph->protocol == IPPROTO_TCP ||
-+		     iph->protocol == IPPROTO_UDP ||
-+		     iph->protocol == IPPROTO_SCTP ||
-+		     iph->protocol == IPPROTO_DCCP ||
-+		     iph->protocol == IPPROTO_ESP))
-+			h2 ^= *(((u32*)iph) + iph->ihl);
-+		break;
-+	}
-+	case __constant_htons(ETH_P_IPV6):
-+	{
-+		struct ipv6hdr *iph = skb->nh.ipv6h;
-+		h = iph->daddr.s6_addr32[3];
-+		hs = iph->saddr.s6_addr32[3];
-+		nfm = skb->nfmark;
-+		h2 = hs^iph->nexthdr;
-+		if (iph->nexthdr == IPPROTO_TCP ||
-+		    iph->nexthdr == IPPROTO_UDP ||
-+		    iph->nexthdr == IPPROTO_SCTP ||
-+		    iph->nexthdr == IPPROTO_DCCP ||
-+		    iph->nexthdr == IPPROTO_ESP)
-+			h2 ^= *(u32*)&iph[1];
-+		break;
-+	}
-+	default:
-+		h = (u32)(unsigned long)skb->dst;
-+		hs = (u32)(unsigned long)skb->sk;
-+		nfm = skb->nfmark;
-+		h2 = hs^skb->protocol;
-+	}
-+	switch(q->hash_kind)
-+	{
-+	case TCA_SFQ_HASH_CLASSIC:
-+		return esfq_fold_hash_classic(q, h, h2);
-+	case TCA_SFQ_HASH_DST:
-+		return esfq_hash_u32(q,h);
-+	case TCA_SFQ_HASH_DSTDIR:
-+		return esfq_hash_direct(q, ntohl(h));
-+	case TCA_SFQ_HASH_SRC:
-+		return esfq_hash_u32(q,hs);
-+	case TCA_SFQ_HASH_SRCDIR:
-+		return esfq_hash_direct(q, ntohl(hs));
-+#ifdef CONFIG_NETFILTER
-+	case TCA_SFQ_HASH_FWMARK:
-+		return esfq_hash_u32(q,nfm);
-+	case TCA_SFQ_HASH_FWMARKDIR:
-+		return esfq_hash_direct(q,nfm);
-+#endif
-+	default:
-+		if (net_ratelimit())
-+			printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n");
-+	}
-+	return esfq_fold_hash_classic(q, h, h2);
-+}
-+
-+static inline void esfq_link(struct esfq_sched_data *q, esfq_index x)
-+{
-+	esfq_index p, n;
-+	int d = q->qs[x].qlen + q->depth;
-+
-+	p = d;
-+	n = q->dep[d].next;
-+	q->dep[x].next = n;
-+	q->dep[x].prev = p;
-+	q->dep[p].next = q->dep[n].prev = x;
-+}
-+
-+static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x)
-+{
-+	esfq_index p, n;
-+
-+	n = q->dep[x].next;
-+	p = q->dep[x].prev;
-+	q->dep[p].next = n;
-+	q->dep[n].prev = p;
-+
-+	if (n == p && q->max_depth == q->qs[x].qlen + 1)
-+		q->max_depth--;
-+
-+	esfq_link(q, x);
-+}
-+
-+static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x)
-+{
-+	esfq_index p, n;
-+	int d;
-+
-+	n = q->dep[x].next;
-+	p = q->dep[x].prev;
-+	q->dep[p].next = n;
-+	q->dep[n].prev = p;
-+	d = q->qs[x].qlen;
-+	if (q->max_depth < d)
-+		q->max_depth = d;
-+
-+	esfq_link(q, x);
-+}
-+
-+static unsigned int esfq_drop(struct Qdisc *sch)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	esfq_index d = q->max_depth;
-+	struct sk_buff *skb;
-+	unsigned int len;
-+
-+	/* Queue is full! Find the longest slot and
-+	   drop a packet from it */
-+
-+	if (d > 1) {
-+		esfq_index x = q->dep[d+q->depth].next;
-+		skb = q->qs[x].prev;
-+		len = skb->len;
-+		__skb_unlink(skb, &q->qs[x]);
-+		kfree_skb(skb);
-+		esfq_dec(q, x);
-+		sch->q.qlen--;
-+		sch->qstats.drops++;
-+		return len;
-+	}
-+
-+	if (d == 1) {
-+		/* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
-+		d = q->next[q->tail];
-+		q->next[q->tail] = q->next[d];
-+		q->allot[q->next[d]] += q->quantum;
-+		skb = q->qs[d].prev;
-+		len = skb->len;
-+		__skb_unlink(skb, &q->qs[d]);
-+		kfree_skb(skb);
-+		esfq_dec(q, d);
-+		sch->q.qlen--;
-+		q->ht[q->hash[d]] = q->depth;
-+		sch->qstats.drops++;
-+		return len;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	unsigned hash = esfq_hash(q, skb);
-+	unsigned depth = q->depth;
-+	esfq_index x;
-+
-+	x = q->ht[hash];
-+	if (x == depth) {
-+		q->ht[hash] = x = q->dep[depth].next;
-+		q->hash[x] = hash;
-+	}
-+	__skb_queue_tail(&q->qs[x], skb);
-+	esfq_inc(q, x);
-+	if (q->qs[x].qlen == 1) {		/* The flow is new */
-+		if (q->tail == depth) {	/* It is the first flow */
-+			q->tail = x;
-+			q->next[x] = x;
-+			q->allot[x] = q->quantum;
-+		} else {
-+			q->next[x] = q->next[q->tail];
-+			q->next[q->tail] = x;
-+			q->tail = x;
-+		}
-+	}
-+	if (++sch->q.qlen < q->limit-1) {
-+		sch->bstats.bytes += skb->len;
-+		sch->bstats.packets++;
-+		return 0;
-+	}
-+
-+	esfq_drop(sch);
-+	return NET_XMIT_CN;
-+}
-+
-+static int
-+esfq_requeue(struct sk_buff *skb, struct Qdisc* sch)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	unsigned hash = esfq_hash(q, skb);
-+	unsigned depth = q->depth;
-+	esfq_index x;
-+
-+	x = q->ht[hash];
-+	if (x == depth) {
-+		q->ht[hash] = x = q->dep[depth].next;
-+		q->hash[x] = hash;
-+	}
-+	__skb_queue_head(&q->qs[x], skb);
-+	esfq_inc(q, x);
-+	if (q->qs[x].qlen == 1) {		/* The flow is new */
-+		if (q->tail == depth) {	/* It is the first flow */
-+			q->tail = x;
-+			q->next[x] = x;
-+			q->allot[x] = q->quantum;
-+		} else {
-+			q->next[x] = q->next[q->tail];
-+			q->next[q->tail] = x;
-+			q->tail = x;
-+		}
-+	}
-+	if (++sch->q.qlen < q->limit - 1) {
-+		sch->qstats.requeues++;
-+		return 0;
-+	}
-+
-+	sch->qstats.drops++;
-+	esfq_drop(sch);
-+	return NET_XMIT_CN;
-+}
-+
-+
-+
-+
-+static struct sk_buff *
-+esfq_dequeue(struct Qdisc* sch)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	struct sk_buff *skb;
-+	unsigned depth = q->depth;
-+	esfq_index a, old_a;
-+
-+	/* No active slots */
-+	if (q->tail == depth)
-+		return NULL;
-+	
-+	a = old_a = q->next[q->tail];
-+	
-+	/* Grab packet */
-+	skb = __skb_dequeue(&q->qs[a]);
-+	esfq_dec(q, a);
-+	sch->q.qlen--;
-+	
-+	/* Is the slot empty? */
-+	if (q->qs[a].qlen == 0) {
-+		q->ht[q->hash[a]] = depth;
-+		a = q->next[a];
-+		if (a == old_a) {
-+			q->tail = depth;
-+			return skb;
-+		}
-+		q->next[q->tail] = a;
-+		q->allot[a] += q->quantum;
-+	} else if ((q->allot[a] -= skb->len) <= 0) {
-+		q->tail = a;
-+		a = q->next[a];
-+		q->allot[a] += q->quantum;
-+	}
-+	
-+	return skb;
-+}
-+
-+static void
-+esfq_reset(struct Qdisc* sch)
-+{
-+	struct sk_buff *skb;
-+
-+	while ((skb = esfq_dequeue(sch)) != NULL)
-+		kfree_skb(skb);
-+}
-+
-+static void esfq_perturbation(unsigned long arg)
-+{
-+	struct Qdisc *sch = (struct Qdisc*)arg;
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+
-+	q->perturbation = net_random()&0x1F;
-+
-+	if (q->perturb_period) {
-+		q->perturb_timer.expires = jiffies + q->perturb_period;
-+		add_timer(&q->perturb_timer);
-+	}
-+}
-+
-+static int esfq_change(struct Qdisc *sch, struct rtattr *opt)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	struct tc_esfq_qopt *ctl = RTA_DATA(opt);
-+	int old_perturb = q->perturb_period;
-+	
-+	if (opt->rta_len < RTA_LENGTH(sizeof(*ctl)))
-+		return -EINVAL;
-+	
-+	sch_tree_lock(sch);
-+	q->quantum = ctl->quantum ? : psched_mtu(sch->dev);
-+	q->perturb_period = ctl->perturb_period*HZ;
-+//	q->hash_divisor = ctl->divisor;
-+//	q->tail = q->limit = q->depth = ctl->flows;
-+	
-+	if (ctl->limit)
-+		q->limit = min_t(u32, ctl->limit, q->depth);
-+	
-+	if (ctl->hash_kind) {
-+		q->hash_kind = ctl->hash_kind;
-+		if (q->hash_kind !=  TCA_SFQ_HASH_CLASSIC)
-+			q->perturb_period = 0;
-+	}
-+	
-+	// is sch_tree_lock enough to do this ?
-+	while (sch->q.qlen >= q->limit-1)
-+		esfq_drop(sch);
-+	
-+	if (old_perturb)
-+		del_timer(&q->perturb_timer);
-+	if (q->perturb_period) {
-+		q->perturb_timer.expires = jiffies + q->perturb_period;
-+		add_timer(&q->perturb_timer);
-+	} else {
-+		q->perturbation = 0;
-+	}
-+	sch_tree_unlock(sch);
-+	return 0;
-+}
-+
-+static int esfq_init(struct Qdisc *sch, struct rtattr *opt)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	struct tc_esfq_qopt *ctl;
-+	esfq_index p = ~0UL/2;
-+	int i;
-+	
-+	if (opt && opt->rta_len < RTA_LENGTH(sizeof(*ctl)))
-+		return -EINVAL;
-+
-+	init_timer(&q->perturb_timer);
-+	q->perturb_timer.data = (unsigned long)sch;
-+	q->perturb_timer.function = esfq_perturbation;
-+	q->perturbation = 0;
-+	q->hash_kind = TCA_SFQ_HASH_CLASSIC;
-+	q->max_depth = 0;
-+	q->dyn_min = ~0U; /* maximum value for this type */
-+	q->dyn_max = 0;  /* dyn_min/dyn_max will be set properly upon first packet */
-+	if (opt == NULL) {
-+		q->quantum = psched_mtu(sch->dev);
-+		q->perturb_period = 0;
-+		q->hash_divisor = 1024;
-+		q->tail = q->limit = q->depth = 128;
-+		
-+	} else {
-+		ctl = RTA_DATA(opt);
-+		q->quantum = ctl->quantum ? : psched_mtu(sch->dev);
-+		q->perturb_period = ctl->perturb_period*HZ;
-+		q->hash_divisor = ctl->divisor ? : 1024;
-+		q->tail = q->limit = q->depth = ctl->flows ? : 128;
-+		
-+		if ( q->depth > p - 1 )
-+			return -EINVAL;
-+		
-+		if (ctl->limit)
-+			q->limit = min_t(u32, ctl->limit, q->depth);
-+		
-+		if (ctl->hash_kind) {
-+			q->hash_kind = ctl->hash_kind;
-+		}
-+		
-+		if (q->perturb_period) {
-+			q->perturb_timer.expires = jiffies + q->perturb_period;
-+			add_timer(&q->perturb_timer);
-+		}
-+	}
-+	
-+	q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL);
-+	if (!q->ht)
-+		goto err_case;
-+		
-+	q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL);
-+	if (!q->dep)
-+		goto err_case;
-+	q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL);
-+	if (!q->next)
-+		goto err_case;
-+	
-+	q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL);
-+	if (!q->allot)
-+		goto err_case;
-+	q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL);
-+	if (!q->hash)
-+		goto err_case;
-+	q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL);
-+	if (!q->qs)
-+		goto err_case;
-+	
-+	for (i=0; i< q->hash_divisor; i++)
-+		q->ht[i] = q->depth;
-+	for (i=0; i<q->depth; i++) {
-+		skb_queue_head_init(&q->qs[i]);
-+		q->dep[i+q->depth].next = i+q->depth;
-+		q->dep[i+q->depth].prev = i+q->depth;
-+	}
-+	
-+	for (i=0; i<q->depth; i++)
-+		esfq_link(q, i);
-+	return 0;
-+err_case:
-+	del_timer(&q->perturb_timer);
-+	if (q->ht)
-+		kfree(q->ht);
-+	if (q->dep)
-+		kfree(q->dep);
-+	if (q->next)
-+		kfree(q->next);
-+	if (q->allot)
-+		kfree(q->allot);
-+	if (q->hash)
-+		kfree(q->hash);
-+	if (q->qs)
-+		kfree(q->qs);
-+	return -ENOBUFS;
-+}
-+
-+static void esfq_destroy(struct Qdisc *sch)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	del_timer(&q->perturb_timer);
-+	if(q->ht)
-+		kfree(q->ht);
-+	if(q->dep)
-+		kfree(q->dep);
-+	if(q->next)
-+		kfree(q->next);
-+	if(q->allot)
-+		kfree(q->allot);
-+	if(q->hash)
-+		kfree(q->hash);
-+	if(q->qs)
-+		kfree(q->qs);
-+}
-+
-+static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	unsigned char	 *b = skb->tail;
-+	struct tc_esfq_qopt opt;
-+
-+	opt.quantum = q->quantum;
-+	opt.perturb_period = q->perturb_period/HZ;
-+
-+	opt.limit = q->limit;
-+	opt.divisor = q->hash_divisor;
-+	opt.flows = q->depth;
-+	opt.hash_kind = q->hash_kind;
-+
-+	RTA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
-+
-+	return skb->len;
-+
-+rtattr_failure:
-+	skb_trim(skb, b - skb->data);
-+	return -1;
-+}
-+
-+static struct Qdisc_ops esfq_qdisc_ops =
-+{
-+	.next		=	NULL,
-+	.cl_ops		=	NULL,
-+	.id		=	"esfq",
-+	.priv_size	=	sizeof(struct esfq_sched_data),
-+	.enqueue	=	esfq_enqueue,
-+	.dequeue	=	esfq_dequeue,
-+	.requeue	=	esfq_requeue,
-+	.drop		=	esfq_drop,
-+	.init		=	esfq_init,
-+	.reset		=	esfq_reset,
-+	.destroy	=	esfq_destroy,
-+	.change		=	NULL, /* esfq_change - needs more work */
-+	.dump		=	esfq_dump,
-+	.owner		=	THIS_MODULE,
-+};
-+
-+static int __init esfq_module_init(void)
-+{
-+	return register_qdisc(&esfq_qdisc_ops);
-+}
-+static void __exit esfq_module_exit(void) 
-+{
-+	unregister_qdisc(&esfq_qdisc_ops);
-+}
-+module_init(esfq_module_init)
-+module_exit(esfq_module_exit)
-+MODULE_LICENSE("GPL");
diff --git a/openwrt/target/linux/generic-2.6/patches/201-multiple_default_gateways.patch b/openwrt/target/linux/generic-2.6/patches/201-multiple_default_gateways.patch
deleted file mode 100644
index b05012ff10..0000000000
--- a/openwrt/target/linux/generic-2.6/patches/201-multiple_default_gateways.patch
+++ /dev/null
@@ -1,1264 +0,0 @@
-diff -ur v2.6.14/linux/include/linux/netfilter_ipv4/ip_nat.h linux/include/linux/netfilter_ipv4/ip_nat.h
---- v2.6.14/linux/include/linux/netfilter_ipv4/ip_nat.h	2005-10-29 14:15:09.000000000 +0300
-+++ linux/include/linux/netfilter_ipv4/ip_nat.h	2005-10-29 18:11:32.885759304 +0300
-@@ -63,6 +63,13 @@
- 
- struct ip_conntrack;
- 
-+/* Call input routing for SNAT-ed traffic */
-+extern unsigned int ip_nat_route_input(unsigned int hooknum,
-+				       struct sk_buff **pskb,
-+				       const struct net_device *in,
-+				       const struct net_device *out,
-+				       int (*okfn)(struct sk_buff *));
-+
- /* Set up the info structure to map into this range. */
- extern unsigned int ip_nat_setup_info(struct ip_conntrack *conntrack,
- 				      const struct ip_nat_range *range,
-diff -ur v2.6.14/linux/include/linux/rtnetlink.h linux/include/linux/rtnetlink.h
---- v2.6.14/linux/include/linux/rtnetlink.h	2005-10-29 14:15:09.000000000 +0300
-+++ linux/include/linux/rtnetlink.h	2005-10-29 18:11:21.299520680 +0300
-@@ -292,6 +292,8 @@
- #define RTNH_F_DEAD		1	/* Nexthop is dead (used by multipath)	*/
- #define RTNH_F_PERVASIVE	2	/* Do recursive gateway lookup	*/
- #define RTNH_F_ONLINK		4	/* Gateway is forced on link	*/
-+#define RTNH_F_SUSPECT		8	/* We don't know the real state	*/
-+#define RTNH_F_BADSTATE		(RTNH_F_DEAD | RTNH_F_SUSPECT)
- 
- /* Macros to handle hexthops */
- 
-diff -ur v2.6.14/linux/include/net/flow.h linux/include/net/flow.h
---- v2.6.14/linux/include/net/flow.h	2005-06-18 08:50:52.000000000 +0300
-+++ linux/include/net/flow.h	2005-10-29 18:11:32.885759304 +0300
-@@ -19,6 +19,8 @@
- 			__u32			daddr;
- 			__u32			saddr;
- 			__u32			fwmark;
-+			__u32			lsrc;
-+			__u32			gw;
- 			__u8			tos;
- 			__u8			scope;
- 		} ip4_u;
-@@ -46,6 +48,8 @@
- #define fl4_dst		nl_u.ip4_u.daddr
- #define fl4_src		nl_u.ip4_u.saddr
- #define fl4_fwmark	nl_u.ip4_u.fwmark
-+#define fl4_lsrc	nl_u.ip4_u.lsrc
-+#define fl4_gw		nl_u.ip4_u.gw
- #define fl4_tos		nl_u.ip4_u.tos
- #define fl4_scope	nl_u.ip4_u.scope
- 
-diff -ur v2.6.14/linux/include/net/ip_fib.h linux/include/net/ip_fib.h
---- v2.6.14/linux/include/net/ip_fib.h	2005-10-29 14:15:09.000000000 +0300
-+++ linux/include/net/ip_fib.h	2005-10-29 18:11:21.300520528 +0300
-@@ -195,7 +195,8 @@
- 
- static inline void fib_select_default(const struct flowi *flp, struct fib_result *res)
- {
--	if (FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK)
-+	if ((FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK) ||
-+	    FIB_RES_NH(*res).nh_scope == RT_SCOPE_HOST)
- 		ip_fib_main_table->tb_select_default(ip_fib_main_table, flp, res);
- }
- 
-@@ -207,6 +208,7 @@
- extern int fib_lookup(const struct flowi *flp, struct fib_result *res);
- extern struct fib_table *__fib_new_table(int id);
- extern void fib_rule_put(struct fib_rule *r);
-+extern int fib_result_table(struct fib_result *res);
- 
- static inline struct fib_table *fib_get_table(int id)
- {
-@@ -300,4 +302,6 @@
- extern void fib_proc_exit(void);
- #endif
- 
-+extern rwlock_t fib_nhflags_lock;
-+
- #endif  /* _NET_FIB_H */
-diff -ur v2.6.14/linux/include/net/route.h linux/include/net/route.h
---- v2.6.14/linux/include/net/route.h	2005-10-29 14:15:09.000000000 +0300
-+++ linux/include/net/route.h	2005-10-29 18:11:32.885759304 +0300
-@@ -117,6 +117,7 @@
- extern int		ip_route_output_key(struct rtable **, struct flowi *flp);
- extern int		ip_route_output_flow(struct rtable **rp, struct flowi *flp, struct sock *sk, int flags);
- extern int		ip_route_input(struct sk_buff*, u32 dst, u32 src, u8 tos, struct net_device *devin);
-+extern int		ip_route_input_lookup(struct sk_buff*, u32 dst, u32 src, u8 tos, struct net_device *devin, u32 lsrc);
- extern unsigned short	ip_rt_frag_needed(struct iphdr *iph, unsigned short new_mtu);
- extern void		ip_rt_send_redirect(struct sk_buff *skb);
- 
-diff -ur v2.6.14/linux/net/ipv4/fib_frontend.c linux/net/ipv4/fib_frontend.c
---- v2.6.14/linux/net/ipv4/fib_frontend.c	2005-10-29 14:15:09.000000000 +0300
-+++ linux/net/ipv4/fib_frontend.c	2005-10-29 18:11:21.300520528 +0300
-@@ -54,6 +54,8 @@
- struct fib_table *ip_fib_local_table;
- struct fib_table *ip_fib_main_table;
- 
-+#define FIB_RES_TABLE(r) (RT_TABLE_MAIN)
-+
- #else
- 
- #define RT_TABLE_MIN 1
-@@ -71,6 +73,7 @@
- 	return tb;
- }
- 
-+#define FIB_RES_TABLE(r) (fib_result_table(r))
- 
- #endif /* CONFIG_IP_MULTIPLE_TABLES */
- 
-@@ -168,6 +171,9 @@
- 					.tos = tos } },
- 			    .iif = oif };
- 	struct fib_result res;
-+	int table;
-+	unsigned char prefixlen;
-+	unsigned char scope;
- 	int no_addr, rpf;
- 	int ret;
- 
-@@ -189,31 +195,35 @@
- 		goto e_inval_res;
- 	*spec_dst = FIB_RES_PREFSRC(res);
- 	fib_combine_itag(itag, &res);
--#ifdef CONFIG_IP_ROUTE_MULTIPATH
--	if (FIB_RES_DEV(res) == dev || res.fi->fib_nhs > 1)
--#else
- 	if (FIB_RES_DEV(res) == dev)
--#endif
- 	{
- 		ret = FIB_RES_NH(res).nh_scope >= RT_SCOPE_HOST;
- 		fib_res_put(&res);
- 		return ret;
- 	}
-+	table = FIB_RES_TABLE(&res);
-+	prefixlen = res.prefixlen;
-+	scope = res.scope;
- 	fib_res_put(&res);
- 	if (no_addr)
- 		goto last_resort;
--	if (rpf)
--		goto e_inval;
- 	fl.oif = dev->ifindex;
- 
- 	ret = 0;
- 	if (fib_lookup(&fl, &res) == 0) {
--		if (res.type == RTN_UNICAST) {
-+		if (res.type == RTN_UNICAST &&
-+		    ((table == FIB_RES_TABLE(&res) &&
-+		      res.prefixlen >= prefixlen && res.scope >= scope) ||
-+		     !rpf)) {
- 			*spec_dst = FIB_RES_PREFSRC(res);
- 			ret = FIB_RES_NH(res).nh_scope >= RT_SCOPE_HOST;
-+			fib_res_put(&res);
-+			return ret;
- 		}
- 		fib_res_put(&res);
- 	}
-+	if (rpf)
-+		goto e_inval;
- 	return ret;
- 
- last_resort:
-@@ -584,9 +594,7 @@
- 	switch (event) {
- 	case NETDEV_UP:
- 		fib_add_ifaddr(ifa);
--#ifdef CONFIG_IP_ROUTE_MULTIPATH
- 		fib_sync_up(ifa->ifa_dev->dev);
--#endif
- 		rt_cache_flush(-1);
- 		break;
- 	case NETDEV_DOWN:
-@@ -622,9 +630,7 @@
- 		for_ifa(in_dev) {
- 			fib_add_ifaddr(ifa);
- 		} endfor_ifa(in_dev);
--#ifdef CONFIG_IP_ROUTE_MULTIPATH
- 		fib_sync_up(dev);
--#endif
- 		rt_cache_flush(-1);
- 		break;
- 	case NETDEV_DOWN:
-diff -ur v2.6.14/linux/net/ipv4/fib_hash.c linux/net/ipv4/fib_hash.c
---- v2.6.14/linux/net/ipv4/fib_hash.c	2005-10-29 14:15:09.000000000 +0300
-+++ linux/net/ipv4/fib_hash.c	2005-10-29 18:11:21.301520376 +0300
-@@ -276,30 +276,38 @@
- 	return err;
- }
- 
--static int fn_hash_last_dflt=-1;
--
- static void
- fn_hash_select_default(struct fib_table *tb, const struct flowi *flp, struct fib_result *res)
- {
--	int order, last_idx;
-+	int order, last_idx, last_dflt, last_nhsel;
-+	struct fib_alias *first_fa = NULL;
-+	struct hlist_head *head;
- 	struct hlist_node *node;
- 	struct fib_node *f;
- 	struct fib_info *fi = NULL;
- 	struct fib_info *last_resort;
- 	struct fn_hash *t = (struct fn_hash*)tb->tb_data;
--	struct fn_zone *fz = t->fn_zones[0];
-+	struct fn_zone *fz = t->fn_zones[res->prefixlen];
-+	u32 k;
- 
- 	if (fz == NULL)
- 		return;
- 
-+	k = fz_key(flp->fl4_dst, fz);
-+	last_dflt = -2;
-+	last_nhsel = 0;
- 	last_idx = -1;
- 	last_resort = NULL;
- 	order = -1;
- 
- 	read_lock(&fib_hash_lock);
--	hlist_for_each_entry(f, node, &fz->fz_hash[0], fn_hash) {
-+	head = &fz->fz_hash[fn_hash(k, fz)];
-+	hlist_for_each_entry(f, node, head, fn_hash) {
- 		struct fib_alias *fa;
- 
-+		if (f->fn_key != k)
-+			continue;
-+
- 		list_for_each_entry(fa, &f->fn_alias, fa_list) {
- 			struct fib_info *next_fi = fa->fa_info;
- 
-@@ -307,41 +315,52 @@
- 			    fa->fa_type != RTN_UNICAST)
- 				continue;
- 
-+			if (fa->fa_tos &&
-+			    fa->fa_tos != flp->fl4_tos)
-+				continue;
- 			if (next_fi->fib_priority > res->fi->fib_priority)
- 				break;
--			if (!next_fi->fib_nh[0].nh_gw ||
--			    next_fi->fib_nh[0].nh_scope != RT_SCOPE_LINK)
--				continue;
- 			fa->fa_state |= FA_S_ACCESSED;
- 
--			if (fi == NULL) {
--				if (next_fi != res->fi)
--					break;
--			} else if (!fib_detect_death(fi, order, &last_resort,
--						     &last_idx, &fn_hash_last_dflt)) {
-+			if (!first_fa) {
-+				last_dflt = fa->fa_last_dflt;
-+				first_fa = fa;
-+			}
-+			if (fi && !fib_detect_death(fi, order, &last_resort,
-+				&last_idx, &last_dflt, &last_nhsel, flp)) {
- 				if (res->fi)
- 					fib_info_put(res->fi);
- 				res->fi = fi;
- 				atomic_inc(&fi->fib_clntref);
--				fn_hash_last_dflt = order;
-+				first_fa->fa_last_dflt = order;
- 				goto out;
- 			}
- 			fi = next_fi;
- 			order++;
- 		}
-+		break;
- 	}
- 
- 	if (order <= 0 || fi == NULL) {
--		fn_hash_last_dflt = -1;
-+		if (fi && fi->fib_nhs > 1 &&
-+		    fib_detect_death(fi, order, &last_resort, &last_idx,
-+			&last_dflt, &last_nhsel, flp) &&
-+		    last_resort == fi) {
-+			read_lock_bh(&fib_nhflags_lock);
-+			fi->fib_nh[last_nhsel].nh_flags &= ~RTNH_F_SUSPECT;
-+			read_unlock_bh(&fib_nhflags_lock);
-+		}
-+		if (first_fa) first_fa->fa_last_dflt = -1;
- 		goto out;
- 	}
- 
--	if (!fib_detect_death(fi, order, &last_resort, &last_idx, &fn_hash_last_dflt)) {
-+	if (!fib_detect_death(fi, order, &last_resort, &last_idx,
-+			      &last_dflt, &last_nhsel, flp)) {
- 		if (res->fi)
- 			fib_info_put(res->fi);
- 		res->fi = fi;
- 		atomic_inc(&fi->fib_clntref);
--		fn_hash_last_dflt = order;
-+		first_fa->fa_last_dflt = order;
- 		goto out;
- 	}
- 
-@@ -351,8 +370,11 @@
- 		res->fi = last_resort;
- 		if (last_resort)
- 			atomic_inc(&last_resort->fib_clntref);
-+		read_lock_bh(&fib_nhflags_lock);
-+		last_resort->fib_nh[last_nhsel].nh_flags &= ~RTNH_F_SUSPECT;
-+		read_unlock_bh(&fib_nhflags_lock);
-+		first_fa->fa_last_dflt = last_idx;
- 	}
--	fn_hash_last_dflt = last_idx;
- out:
- 	read_unlock(&fib_hash_lock);
- }
-@@ -451,6 +473,7 @@
- 			write_lock_bh(&fib_hash_lock);
- 			fi_drop = fa->fa_info;
- 			fa->fa_info = fi;
-+			fa->fa_last_dflt = -1;
- 			fa->fa_type = type;
- 			fa->fa_scope = r->rtm_scope;
- 			state = fa->fa_state;
-@@ -510,6 +533,7 @@
- 	new_fa->fa_type = type;
- 	new_fa->fa_scope = r->rtm_scope;
- 	new_fa->fa_state = 0;
-+	new_fa->fa_last_dflt = -1;
- 
- 	/*
- 	 * Insert new entry to the list.
-diff -ur v2.6.14/linux/net/ipv4/fib_lookup.h linux/net/ipv4/fib_lookup.h
---- v2.6.14/linux/net/ipv4/fib_lookup.h	2005-10-29 14:15:09.000000000 +0300
-+++ linux/net/ipv4/fib_lookup.h	2005-10-29 18:11:21.302520224 +0300
-@@ -9,6 +9,7 @@
- 	struct list_head	fa_list;
- 	struct rcu_head rcu;
- 	struct fib_info		*fa_info;
-+	int			fa_last_dflt;
- 	u8			fa_tos;
- 	u8			fa_type;
- 	u8			fa_scope;
-@@ -40,6 +41,7 @@
- 					u8 tos, u32 prio);
- extern int fib_detect_death(struct fib_info *fi, int order,
- 			    struct fib_info **last_resort,
--			    int *last_idx, int *dflt);
-+			    int *last_idx, int *dflt, int *last_nhsel,
-+			    const struct flowi *flp);
- 
- #endif /* _FIB_LOOKUP_H */
-diff -ur v2.6.14/linux/net/ipv4/fib_rules.c linux/net/ipv4/fib_rules.c
---- v2.6.14/linux/net/ipv4/fib_rules.c	2005-08-29 07:51:29.000000000 +0300
-+++ linux/net/ipv4/fib_rules.c	2005-10-29 18:11:21.302520224 +0300
-@@ -280,6 +280,11 @@
- 	}
- }
- 
-+int fib_result_table(struct fib_result *res)
-+{
-+	return res->r->r_table;
-+}
-+
- int fib_lookup(const struct flowi *flp, struct fib_result *res)
- {
- 	int err;
-@@ -342,7 +347,8 @@
- void fib_select_default(const struct flowi *flp, struct fib_result *res)
- {
- 	if (res->r && res->r->r_action == RTN_UNICAST &&
--	    FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK) {
-+	    ((FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK) ||
-+	     FIB_RES_NH(*res).nh_scope == RT_SCOPE_HOST)) {
- 		struct fib_table *tb;
- 		if ((tb = fib_get_table(res->r->r_table)) != NULL)
- 			tb->tb_select_default(tb, flp, res);
-diff -ur v2.6.14/linux/net/ipv4/fib_semantics.c linux/net/ipv4/fib_semantics.c
---- v2.6.14/linux/net/ipv4/fib_semantics.c	2005-10-29 14:15:09.000000000 +0300
-+++ linux/net/ipv4/fib_semantics.c	2005-10-29 18:11:32.886759152 +0300
-@@ -53,6 +53,7 @@
- static struct hlist_head *fib_info_laddrhash;
- static unsigned int fib_hash_size;
- static unsigned int fib_info_cnt;
-+rwlock_t fib_nhflags_lock = RW_LOCK_UNLOCKED;
- 
- #define DEVINDEX_HASHBITS 8
- #define DEVINDEX_HASHSIZE (1U << DEVINDEX_HASHBITS)
-@@ -188,7 +189,7 @@
- #ifdef CONFIG_NET_CLS_ROUTE
- 		    nh->nh_tclassid != onh->nh_tclassid ||
- #endif
--		    ((nh->nh_flags^onh->nh_flags)&~RTNH_F_DEAD))
-+		    ((nh->nh_flags^onh->nh_flags)&~RTNH_F_BADSTATE))
- 			return -1;
- 		onh++;
- 	} endfor_nexthops(fi);
-@@ -225,7 +226,7 @@
- 		    nfi->fib_priority == fi->fib_priority &&
- 		    memcmp(nfi->fib_metrics, fi->fib_metrics,
- 			   sizeof(fi->fib_metrics)) == 0 &&
--		    ((nfi->fib_flags^fi->fib_flags)&~RTNH_F_DEAD) == 0 &&
-+		    ((nfi->fib_flags^fi->fib_flags)&~RTNH_F_BADSTATE) == 0 &&
- 		    (nfi->fib_nhs == 0 || nh_comp(fi, nfi) == 0))
- 			return fi;
- 	}
-@@ -317,26 +318,70 @@
- }
- 
- int fib_detect_death(struct fib_info *fi, int order,
--		     struct fib_info **last_resort, int *last_idx, int *dflt)
-+		     struct fib_info **last_resort, int *last_idx, int *dflt,
-+		     int *last_nhsel, const struct flowi *flp)
- {
- 	struct neighbour *n;
--	int state = NUD_NONE;
-+	int nhsel;
-+	int state;
-+	struct fib_nh * nh;
-+	u32 dst;
-+	int flag, dead = 1;
-+
-+	/* change_nexthops(fi) { */
-+	for (nhsel = 0, nh = fi->fib_nh; nhsel < fi->fib_nhs; nh++, nhsel++) {
-+		if (flp->oif && flp->oif != nh->nh_oif)
-+			continue;
-+		if (flp->fl4_gw && flp->fl4_gw != nh->nh_gw && nh->nh_gw &&
-+		    nh->nh_scope == RT_SCOPE_LINK)
-+			continue;
-+		if (nh->nh_flags & RTNH_F_DEAD)
-+			continue;
- 
--	n = neigh_lookup(&arp_tbl, &fi->fib_nh[0].nh_gw, fi->fib_dev);
--	if (n) {
--		state = n->nud_state;
--		neigh_release(n);
--	}
--	if (state==NUD_REACHABLE)
--		return 0;
--	if ((state&NUD_VALID) && order != *dflt)
--		return 0;
--	if ((state&NUD_VALID) ||
--	    (*last_idx<0 && order > *dflt)) {
--		*last_resort = fi;
--		*last_idx = order;
-+		flag = 0;
-+		if (nh->nh_dev->flags & IFF_NOARP) {
-+			dead = 0;
-+			goto setfl;
-+		}
-+
-+		dst = nh->nh_gw;
-+		if (!nh->nh_gw || nh->nh_scope != RT_SCOPE_LINK)
-+			dst = flp->fl4_dst;
-+
-+		state = NUD_NONE;
-+		n = neigh_lookup(&arp_tbl, &dst, nh->nh_dev);
-+		if (n) {
-+			state = n->nud_state;
-+			neigh_release(n);
-+		}
-+		if (state==NUD_REACHABLE ||
-+			((state&NUD_VALID) && order != *dflt)) {
-+			dead = 0;
-+			goto setfl;
-+		}
-+		if (!(state&NUD_VALID))
-+			flag = 1;
-+		if (!dead)
-+			goto setfl;
-+		if ((state&NUD_VALID) ||
-+		    (*last_idx<0 && order >= *dflt)) {
-+			*last_resort = fi;
-+			*last_idx = order;
-+			*last_nhsel = nhsel;
-+		}
-+
-+		setfl:
-+
-+		read_lock_bh(&fib_nhflags_lock);
-+		if (flag)
-+			nh->nh_flags |= RTNH_F_SUSPECT;
-+		else
-+			nh->nh_flags &= ~RTNH_F_SUSPECT;
-+		read_unlock_bh(&fib_nhflags_lock);
- 	}
--	return 1;
-+	/* } endfor_nexthops(fi) */
-+
-+	return dead;
- }
- 
- #ifdef CONFIG_IP_ROUTE_MULTIPATH
-@@ -507,8 +552,11 @@
- 				return -EINVAL;
- 			if ((dev = __dev_get_by_index(nh->nh_oif)) == NULL)
- 				return -ENODEV;
--			if (!(dev->flags&IFF_UP))
--				return -ENETDOWN;
-+			if (!(dev->flags&IFF_UP)) {
-+				if (fi->fib_protocol != RTPROT_STATIC)
-+					return -ENETDOWN;
-+				nh->nh_flags |= RTNH_F_DEAD;
-+			}
- 			nh->nh_dev = dev;
- 			dev_hold(dev);
- 			nh->nh_scope = RT_SCOPE_LINK;
-@@ -523,24 +571,48 @@
- 			/* It is not necessary, but requires a bit of thinking */
- 			if (fl.fl4_scope < RT_SCOPE_LINK)
- 				fl.fl4_scope = RT_SCOPE_LINK;
--			if ((err = fib_lookup(&fl, &res)) != 0)
--				return err;
-+			err = fib_lookup(&fl, &res);
- 		}
--		err = -EINVAL;
--		if (res.type != RTN_UNICAST && res.type != RTN_LOCAL)
--			goto out;
--		nh->nh_scope = res.scope;
--		nh->nh_oif = FIB_RES_OIF(res);
--		if ((nh->nh_dev = FIB_RES_DEV(res)) == NULL)
--			goto out;
--		dev_hold(nh->nh_dev);
--		err = -ENETDOWN;
--		if (!(nh->nh_dev->flags & IFF_UP))
--			goto out;
--		err = 0;
-+		if (err) {
-+			struct in_device *in_dev;
-+
-+			if (err != -ENETUNREACH ||
-+			    fi->fib_protocol != RTPROT_STATIC)
-+				return err;
-+
-+			in_dev = inetdev_by_index(nh->nh_oif);
-+			if (in_dev == NULL ||
-+			    in_dev->dev->flags & IFF_UP) {
-+				if (in_dev)
-+					in_dev_put(in_dev);
-+				return err;
-+			}
-+			nh->nh_flags |= RTNH_F_DEAD;
-+			nh->nh_scope = RT_SCOPE_LINK;
-+			nh->nh_dev = in_dev->dev;
-+			dev_hold(nh->nh_dev);
-+			in_dev_put(in_dev);
-+		} else {
-+			err = -EINVAL;
-+			if (res.type != RTN_UNICAST && res.type != RTN_LOCAL)
-+				goto out;
-+			nh->nh_scope = res.scope;
-+			nh->nh_oif = FIB_RES_OIF(res);
-+			if ((nh->nh_dev = FIB_RES_DEV(res)) == NULL)
-+				goto out;
-+			dev_hold(nh->nh_dev);
-+			if (!(nh->nh_dev->flags & IFF_UP)) {
-+				if (fi->fib_protocol != RTPROT_STATIC) {
-+					err = -ENETDOWN;
-+					goto out;
-+				}
-+				nh->nh_flags |= RTNH_F_DEAD;
-+			}
-+			err = 0;
- out:
--		fib_res_put(&res);
--		return err;
-+			fib_res_put(&res);
-+			return err;
-+		}
- 	} else {
- 		struct in_device *in_dev;
- 
-@@ -551,8 +623,11 @@
- 		if (in_dev == NULL)
- 			return -ENODEV;
- 		if (!(in_dev->dev->flags&IFF_UP)) {
--			in_dev_put(in_dev);
--			return -ENETDOWN;
-+			if (fi->fib_protocol != RTPROT_STATIC) {
-+				in_dev_put(in_dev);
-+				return -ENETDOWN;
-+			}
-+			nh->nh_flags |= RTNH_F_DEAD;
- 		}
- 		nh->nh_dev = in_dev->dev;
- 		dev_hold(nh->nh_dev);
-@@ -890,8 +965,12 @@
- 				for_nexthops(fi) {
- 					if (nh->nh_flags&RTNH_F_DEAD)
- 						continue;
--					if (!flp->oif || flp->oif == nh->nh_oif)
--						break;
-+					if (flp->oif && flp->oif != nh->nh_oif)
-+						continue;
-+					if (flp->fl4_gw && flp->fl4_gw != nh->nh_gw &&
-+					    nh->nh_gw && nh->nh_scope == RT_SCOPE_LINK)
-+						continue;
-+					break;
- 				}
- #ifdef CONFIG_IP_ROUTE_MULTIPATH
- 				if (nhsel < fi->fib_nhs) {
-@@ -1197,18 +1276,29 @@
- 			prev_fi = fi;
- 			dead = 0;
- 			change_nexthops(fi) {
--				if (nh->nh_flags&RTNH_F_DEAD)
--					dead++;
--				else if (nh->nh_dev == dev &&
--					 nh->nh_scope != scope) {
--					nh->nh_flags |= RTNH_F_DEAD;
-+				if (nh->nh_flags&RTNH_F_DEAD) {
-+					if (fi->fib_protocol!=RTPROT_STATIC ||
-+					    nh->nh_dev == NULL ||
-+					    __in_dev_get_rtnl(nh->nh_dev) == NULL ||
-+					    nh->nh_dev->flags&IFF_UP)
-+						dead++;
-+				} else if (nh->nh_dev == dev &&
-+					   nh->nh_scope != scope) {
-+					write_lock_bh(&fib_nhflags_lock);
- #ifdef CONFIG_IP_ROUTE_MULTIPATH
--					spin_lock_bh(&fib_multipath_lock);
-+					spin_lock(&fib_multipath_lock);
-+					nh->nh_flags |= RTNH_F_DEAD;
- 					fi->fib_power -= nh->nh_power;
- 					nh->nh_power = 0;
--					spin_unlock_bh(&fib_multipath_lock);
-+					spin_unlock(&fib_multipath_lock);
-+#else
-+					nh->nh_flags |= RTNH_F_DEAD;
- #endif
--					dead++;
-+					write_unlock_bh(&fib_nhflags_lock);
-+					if (fi->fib_protocol!=RTPROT_STATIC ||
-+					    force ||
-+					    __in_dev_get_rtnl(dev) == NULL)
-+						dead++;
- 				}
- #ifdef CONFIG_IP_ROUTE_MULTIPATH
- 				if (force > 1 && nh->nh_dev == dev) {
-@@ -1227,11 +1317,8 @@
- 	return ret;
- }
- 
--#ifdef CONFIG_IP_ROUTE_MULTIPATH
--
- /*
--   Dead device goes up. We wake up dead nexthops.
--   It takes sense only on multipath routes.
-+   Dead device goes up or new address is added. We wake up dead nexthops.
-  */
- 
- int fib_sync_up(struct net_device *dev)
-@@ -1241,8 +1328,10 @@
- 	struct hlist_head *head;
- 	struct hlist_node *node;
- 	struct fib_nh *nh;
--	int ret;
-+	struct fib_result res;
-+	int ret, rep;
- 
-+repeat:
- 	if (!(dev->flags&IFF_UP))
- 		return 0;
- 
-@@ -1250,6 +1339,7 @@
- 	hash = fib_devindex_hashfn(dev->ifindex);
- 	head = &fib_info_devhash[hash];
- 	ret = 0;
-+	rep = 0;
- 
- 	hlist_for_each_entry(nh, node, head, nh_hash) {
- 		struct fib_info *fi = nh->nh_parent;
-@@ -1262,19 +1352,37 @@
- 		prev_fi = fi;
- 		alive = 0;
- 		change_nexthops(fi) {
--			if (!(nh->nh_flags&RTNH_F_DEAD)) {
--				alive++;
-+			if (!(nh->nh_flags&RTNH_F_DEAD))
- 				continue;
--			}
- 			if (nh->nh_dev == NULL || !(nh->nh_dev->flags&IFF_UP))
- 				continue;
- 			if (nh->nh_dev != dev || !__in_dev_get_rtnl(dev))
- 				continue;
-+			if (nh->nh_gw && fi->fib_protocol == RTPROT_STATIC) {
-+				struct flowi fl = {
-+					.nl_u = { .ip4_u =
-+						  { .daddr = nh->nh_gw,
-+						    .scope = nh->nh_scope } },
-+					.oif =  nh->nh_oif,
-+				};
-+				if (fib_lookup(&fl, &res) != 0)
-+					continue;
-+				if (res.type != RTN_UNICAST &&
-+				    res.type != RTN_LOCAL) {
-+					fib_res_put(&res);
-+					continue;
-+				}
-+				nh->nh_scope = res.scope;
-+				fib_res_put(&res);
-+				rep = 1;
-+			}
- 			alive++;
-+#ifdef CONFIG_IP_ROUTE_MULTIPATH
- 			spin_lock_bh(&fib_multipath_lock);
- 			nh->nh_power = 0;
- 			nh->nh_flags &= ~RTNH_F_DEAD;
- 			spin_unlock_bh(&fib_multipath_lock);
-+#endif
- 		} endfor_nexthops(fi)
- 
- 		if (alive > 0) {
-@@ -1282,10 +1390,14 @@
- 			ret++;
- 		}
- 	}
-+	if (rep)
-+		goto repeat;
- 
- 	return ret;
- }
- 
-+#ifdef CONFIG_IP_ROUTE_MULTIPATH
-+
- /*
-    The algorithm is suboptimal, but it provides really
-    fair weighted route distribution.
-@@ -1294,24 +1406,45 @@
- void fib_select_multipath(const struct flowi *flp, struct fib_result *res)
- {
- 	struct fib_info *fi = res->fi;
--	int w;
-+	int w, alive;
- 
- 	spin_lock_bh(&fib_multipath_lock);
-+	if (flp->oif) {
-+		int sel = -1;
-+		w = -1;
-+		change_nexthops(fi) {
-+			if (flp->oif != nh->nh_oif)
-+				continue;
-+			if (flp->fl4_gw && flp->fl4_gw != nh->nh_gw &&
-+			    nh->nh_gw && nh->nh_scope == RT_SCOPE_LINK)
-+				continue;
-+			if (!(nh->nh_flags&RTNH_F_BADSTATE)) {
-+				if (nh->nh_power > w) {
-+					w = nh->nh_power;
-+					sel = nhsel;
-+				}
-+			}
-+		} endfor_nexthops(fi);
-+		if (sel >= 0) {
-+			spin_unlock_bh(&fib_multipath_lock);
-+			res->nh_sel = sel;
-+			return;
-+		}
-+		goto last_resort;
-+	}
-+
-+repeat:
- 	if (fi->fib_power <= 0) {
- 		int power = 0;
- 		change_nexthops(fi) {
--			if (!(nh->nh_flags&RTNH_F_DEAD)) {
-+			if (!(nh->nh_flags&RTNH_F_BADSTATE)) {
- 				power += nh->nh_weight;
- 				nh->nh_power = nh->nh_weight;
- 			}
- 		} endfor_nexthops(fi);
- 		fi->fib_power = power;
--		if (power <= 0) {
--			spin_unlock_bh(&fib_multipath_lock);
--			/* Race condition: route has just become dead. */
--			res->nh_sel = 0;
--			return;
--		}
-+		if (power <= 0)
-+			goto last_resort;
- 	}
- 
- 
-@@ -1321,20 +1454,40 @@
- 
- 	w = jiffies % fi->fib_power;
- 
-+	alive = 0;
- 	change_nexthops(fi) {
--		if (!(nh->nh_flags&RTNH_F_DEAD) && nh->nh_power) {
-+		if (!(nh->nh_flags&RTNH_F_BADSTATE) && nh->nh_power) {
- 			if ((w -= nh->nh_power) <= 0) {
- 				nh->nh_power--;
- 				fi->fib_power--;
--				res->nh_sel = nhsel;
- 				spin_unlock_bh(&fib_multipath_lock);
-+				res->nh_sel = nhsel;
- 				return;
- 			}
-+			alive = 1;
-+		}
-+	} endfor_nexthops(fi);
-+	if (alive) {
-+		fi->fib_power = 0;
-+		goto repeat;
-+	}
-+
-+last_resort:
-+
-+	for_nexthops(fi) {
-+		if (!(nh->nh_flags&RTNH_F_DEAD)) {
-+			if (flp->oif && flp->oif != nh->nh_oif)
-+				continue;
-+			if (flp->fl4_gw && flp->fl4_gw != nh->nh_gw &&
-+			    nh->nh_gw && nh->nh_scope == RT_SCOPE_LINK)
-+				continue;
-+			spin_unlock_bh(&fib_multipath_lock);
-+			res->nh_sel = nhsel;
-+			return;
- 		}
- 	} endfor_nexthops(fi);
- 
- 	/* Race condition: route has just become dead. */
--	res->nh_sel = 0;
- 	spin_unlock_bh(&fib_multipath_lock);
- }
- #endif
-diff -ur v2.6.14/linux/net/ipv4/netfilter/ip_nat_core.c linux/net/ipv4/netfilter/ip_nat_core.c
---- v2.6.14/linux/net/ipv4/netfilter/ip_nat_core.c	2005-10-29 14:15:09.000000000 +0300
-+++ linux/net/ipv4/netfilter/ip_nat_core.c	2005-10-29 18:11:32.887759000 +0300
-@@ -591,6 +591,53 @@
- EXPORT_SYMBOL_GPL(ip_nat_port_range_to_nfattr);
- #endif
- 
-+unsigned int
-+ip_nat_route_input(unsigned int hooknum,
-+		struct sk_buff **pskb,
-+		const struct net_device *in,
-+		const struct net_device *out,
-+		int (*okfn)(struct sk_buff *))
-+{
-+	struct sk_buff *skb = *pskb;
-+	struct iphdr *iph;
-+	struct ip_conntrack *conn;
-+	enum ip_conntrack_info ctinfo;
-+	enum ip_conntrack_dir dir;
-+	unsigned long statusbit;
-+	u32 saddr;
-+
-+	if (!(conn = ip_conntrack_get(skb, &ctinfo)))
-+		return NF_ACCEPT;
-+
-+	if (!(conn->status & IPS_NAT_DONE_MASK))
-+		return NF_ACCEPT;
-+	dir = CTINFO2DIR(ctinfo);
-+	statusbit = IPS_SRC_NAT;
-+	if (dir == IP_CT_DIR_REPLY)
-+		statusbit ^= IPS_NAT_MASK;
-+	if (!(conn->status & statusbit))
-+		return NF_ACCEPT;
-+
-+	if (skb->dst)
-+		return NF_ACCEPT;
-+
-+	if (skb->len < sizeof(struct iphdr))
-+		return NF_ACCEPT;
-+
-+	/* use daddr in other direction as masquerade address (lsrc) */
-+	iph = skb->nh.iph;
-+	saddr = conn->tuplehash[!dir].tuple.dst.ip;
-+	if (saddr == iph->saddr)
-+		return NF_ACCEPT;
-+
-+	if (ip_route_input_lookup(skb, iph->daddr, iph->saddr, iph->tos,
-+	    skb->dev, saddr))
-+		return NF_DROP;
-+
-+	return NF_ACCEPT;
-+}
-+EXPORT_SYMBOL_GPL(ip_nat_route_input);
-+
- static int __init ip_nat_init(void)
- {
- 	size_t i;
-diff -ur v2.6.14/linux/net/ipv4/netfilter/ip_nat_standalone.c linux/net/ipv4/netfilter/ip_nat_standalone.c
---- v2.6.14/linux/net/ipv4/netfilter/ip_nat_standalone.c	2005-10-29 14:15:09.000000000 +0300
-+++ linux/net/ipv4/netfilter/ip_nat_standalone.c	2005-10-29 18:11:32.887759000 +0300
-@@ -266,6 +266,14 @@
- 	.priority	= NF_IP_PRI_NAT_DST,
- };
- 
-+/* Before routing, route before mangling */
-+static struct nf_hook_ops ip_nat_inr_ops = {
-+	.hook		= ip_nat_route_input,
-+	.pf		= PF_INET,
-+	.hooknum	= NF_IP_PRE_ROUTING,
-+	.priority	= NF_IP_PRI_LAST-1,
-+};
-+
- /* After packet filtering, change source */
- static struct nf_hook_ops ip_nat_out_ops = {
- 	.hook		= ip_nat_out,
-@@ -330,10 +338,15 @@
- 		printk("ip_nat_init: can't register in hook.\n");
- 		goto cleanup_rule_init;
- 	}
-+	ret = nf_register_hook(&ip_nat_inr_ops);
-+	if (ret < 0) {
-+		printk("ip_nat_init: can't register inr hook.\n");
-+		goto cleanup_inops;
-+	}
- 	ret = nf_register_hook(&ip_nat_out_ops);
- 	if (ret < 0) {
- 		printk("ip_nat_init: can't register out hook.\n");
--		goto cleanup_inops;
-+		goto cleanup_inrops;
- 	}
- 	ret = nf_register_hook(&ip_nat_adjust_in_ops);
- 	if (ret < 0) {
-@@ -367,6 +380,8 @@
- 	nf_unregister_hook(&ip_nat_adjust_in_ops);
-  cleanup_outops:
- 	nf_unregister_hook(&ip_nat_out_ops);
-+ cleanup_inrops:
-+	nf_unregister_hook(&ip_nat_inr_ops);
-  cleanup_inops:
- 	nf_unregister_hook(&ip_nat_in_ops);
-  cleanup_rule_init:
-diff -ur v2.6.14/linux/net/ipv4/netfilter/ipt_MASQUERADE.c linux/net/ipv4/netfilter/ipt_MASQUERADE.c
---- v2.6.14/linux/net/ipv4/netfilter/ipt_MASQUERADE.c	2005-10-29 14:15:09.000000000 +0300
-+++ linux/net/ipv4/netfilter/ipt_MASQUERADE.c	2005-10-29 18:11:32.887759000 +0300
-@@ -97,13 +97,31 @@
- 		return NF_ACCEPT;
- 
- 	mr = targinfo;
--	rt = (struct rtable *)(*pskb)->dst;
--	newsrc = inet_select_addr(out, rt->rt_gateway, RT_SCOPE_UNIVERSE);
--	if (!newsrc) {
--		printk("MASQUERADE: %s ate my IP address\n", out->name);
--		return NF_DROP;
-+
-+	{
-+		struct flowi fl = { .nl_u = { .ip4_u =
-+					      { .daddr = (*pskb)->nh.iph->daddr,
-+						.tos = (RT_TOS((*pskb)->nh.iph->tos) |
-+							RTO_CONN),
-+						.gw = ((struct rtable *) (*pskb)->dst)->rt_gateway,
-+#ifdef CONFIG_IP_ROUTE_FWMARK
-+						.fwmark = (*pskb)->nfmark
-+#endif
-+					      } },
-+				    .oif = out->ifindex };
-+		if (ip_route_output_key(&rt, &fl) != 0) {
-+			/* Funky routing can do this. */
-+			if (net_ratelimit())
-+				printk("MASQUERADE:"
-+				       " No route: Rusty's brain broke!\n");
-+			return NF_DROP;
-+		}
- 	}
- 
-+	newsrc = rt->rt_src;
-+	DEBUGP("newsrc = %u.%u.%u.%u\n", NIPQUAD(newsrc));
-+	ip_rt_put(rt);
-+
- 	write_lock_bh(&masq_lock);
- 	ct->nat.masq_index = out->ifindex;
- 	write_unlock_bh(&masq_lock);
-diff -ur v2.6.14/linux/net/ipv4/route.c linux/net/ipv4/route.c
---- v2.6.14/linux/net/ipv4/route.c	2005-10-29 14:15:09.000000000 +0300
-+++ linux/net/ipv4/route.c	2005-10-29 18:11:32.889758696 +0300
-@@ -1197,6 +1197,7 @@
- 
- 				/* Gateway is different ... */
- 				rt->rt_gateway		= new_gw;
-+				if (rt->fl.fl4_gw) rt->fl.fl4_gw = new_gw;
- 
- 				/* Redirect received -> path was valid */
- 				dst_confirm(&rth->u.dst);
-@@ -1632,6 +1633,7 @@
- 	rth->fl.fl4_fwmark= skb->nfmark;
- #endif
- 	rth->fl.fl4_src	= saddr;
-+	rth->fl.fl4_lsrc = 0;
- 	rth->rt_src	= saddr;
- #ifdef CONFIG_NET_CLS_ROUTE
- 	rth->u.dst.tclassid = itag;
-@@ -1642,6 +1644,7 @@
- 	dev_hold(rth->u.dst.dev);
- 	rth->idev	= in_dev_get(rth->u.dst.dev);
- 	rth->fl.oif	= 0;
-+	rth->fl.fl4_gw	= 0;
- 	rth->rt_gateway	= daddr;
- 	rth->rt_spec_dst= spec_dst;
- 	rth->rt_type	= RTN_MULTICAST;
-@@ -1706,7 +1709,7 @@
- 				  struct fib_result* res, 
- 				  struct in_device *in_dev, 
- 				  u32 daddr, u32 saddr, u32 tos, 
--				  struct rtable **result) 
-+				  u32 lsrc, struct rtable **result) 
- {
- 
- 	struct rtable *rth;
-@@ -1739,6 +1742,7 @@
- 		flags |= RTCF_DIRECTSRC;
- 
- 	if (out_dev == in_dev && err && !(flags & (RTCF_NAT | RTCF_MASQ)) &&
-+	    !lsrc &&
- 	    (IN_DEV_SHARED_MEDIA(out_dev) ||
- 	     inet_addr_onlink(out_dev, saddr, FIB_RES_GW(*res))))
- 		flags |= RTCF_DOREDIRECT;
-@@ -1778,6 +1782,7 @@
- #endif
- 	rth->fl.fl4_src	= saddr;
- 	rth->rt_src	= saddr;
-+	rth->fl.fl4_lsrc	= lsrc;
- 	rth->rt_gateway	= daddr;
- 	rth->rt_iif 	=
- 		rth->fl.iif	= in_dev->dev->ifindex;
-@@ -1785,6 +1790,7 @@
- 	dev_hold(rth->u.dst.dev);
- 	rth->idev	= in_dev_get(rth->u.dst.dev);
- 	rth->fl.oif 	= 0;
-+	rth->fl.fl4_gw	= 0;
- 	rth->rt_spec_dst= spec_dst;
- 
- 	rth->u.dst.input = ip_forward;
-@@ -1806,19 +1812,20 @@
- 				       struct fib_result* res, 
- 				       const struct flowi *fl,
- 				       struct in_device *in_dev,
--				       u32 daddr, u32 saddr, u32 tos)
-+				       u32 daddr, u32 saddr, u32 tos, u32 lsrc)
- {
- 	struct rtable* rth = NULL;
- 	int err;
- 	unsigned hash;
- 
-+	fib_select_default(fl, res);
- #ifdef CONFIG_IP_ROUTE_MULTIPATH
--	if (res->fi && res->fi->fib_nhs > 1 && fl->oif == 0)
-+	if (res->fi && res->fi->fib_nhs > 1)
- 		fib_select_multipath(fl, res);
- #endif
- 
- 	/* create a routing cache entry */
--	err = __mkroute_input(skb, res, in_dev, daddr, saddr, tos, &rth);
-+	err = __mkroute_input(skb, res, in_dev, daddr, saddr, tos, lsrc, &rth);
- 	if (err)
- 		return err;
- 
-@@ -1831,7 +1838,7 @@
- 				   struct fib_result* res, 
- 				   const struct flowi *fl,
- 				   struct in_device *in_dev,
--				   u32 daddr, u32 saddr, u32 tos)
-+				   u32 daddr, u32 saddr, u32 tos, u32 lsrc)
- {
- #ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- 	struct rtable* rth = NULL, *rtres;
-@@ -1847,7 +1854,7 @@
- 	/* distinguish between multipath and singlepath */
- 	if (hopcount < 2)
- 		return ip_mkroute_input_def(skb, res, fl, in_dev, daddr,
--					    saddr, tos);
-+					    saddr, tos, 0);
- 	
- 	/* add all alternatives to the routing cache */
- 	for (hop = 0; hop < hopcount; hop++) {
-@@ -1859,7 +1866,7 @@
- 
- 		/* create a routing cache entry */
- 		err = __mkroute_input(skb, res, in_dev, daddr, saddr, tos,
--				      &rth);
-+				      0, &rth);
- 		if (err)
- 			return err;
- 
-@@ -1879,7 +1886,7 @@
- 	skb->dst = &rtres->u.dst;
- 	return err;
- #else /* CONFIG_IP_ROUTE_MULTIPATH_CACHED  */
--	return ip_mkroute_input_def(skb, res, fl, in_dev, daddr, saddr, tos);
-+	return ip_mkroute_input_def(skb, res, fl, in_dev, daddr, saddr, tos, lsrc);
- #endif /* CONFIG_IP_ROUTE_MULTIPATH_CACHED  */
- }
- 
-@@ -1895,20 +1902,20 @@
-  */
- 
- static int ip_route_input_slow(struct sk_buff *skb, u32 daddr, u32 saddr,
--			       u8 tos, struct net_device *dev)
-+			       u8 tos, struct net_device *dev, u32 lsrc)
- {
- 	struct fib_result res;
- 	struct in_device *in_dev = in_dev_get(dev);
- 	struct flowi fl = { .nl_u = { .ip4_u =
- 				      { .daddr = daddr,
--					.saddr = saddr,
-+					.saddr = lsrc? : saddr,
- 					.tos = tos,
- 					.scope = RT_SCOPE_UNIVERSE,
- #ifdef CONFIG_IP_ROUTE_FWMARK
- 					.fwmark = skb->nfmark
- #endif
- 				      } },
--			    .iif = dev->ifindex };
-+			    .iif = lsrc? loopback_dev.ifindex : dev->ifindex };
- 	unsigned	flags = 0;
- 	u32		itag = 0;
- 	struct rtable * rth;
-@@ -1941,6 +1948,12 @@
- 	if (BADCLASS(daddr) || ZERONET(daddr) || LOOPBACK(daddr))
- 		goto martian_destination;
- 
-+	if (lsrc) {
-+		if (MULTICAST(lsrc) || BADCLASS(lsrc) ||
-+		    ZERONET(lsrc) || LOOPBACK(lsrc))
-+			goto e_inval;
-+	}
-+
- 	/*
- 	 *	Now we are ready to route packet.
- 	 */
-@@ -1950,6 +1963,10 @@
- 		goto no_route;
- 	}
- 	free_res = 1;
-+	if (lsrc && res.type != RTN_UNICAST && res.type != RTN_NAT)
-+		goto e_inval;
-+	fl.iif = dev->ifindex;
-+	fl.fl4_src = saddr;
- 
- 	RT_CACHE_STAT_INC(in_slow_tot);
- 
-@@ -1974,7 +1991,7 @@
- 	if (res.type != RTN_UNICAST)
- 		goto martian_destination;
- 
--	err = ip_mkroute_input(skb, &res, &fl, in_dev, daddr, saddr, tos);
-+	err = ip_mkroute_input(skb, &res, &fl, in_dev, daddr, saddr, tos, lsrc);
- 	if (err == -ENOBUFS)
- 		goto e_nobufs;
- 	if (err == -EINVAL)
-@@ -1989,6 +2006,8 @@
- brd_input:
- 	if (skb->protocol != htons(ETH_P_IP))
- 		goto e_inval;
-+	if (lsrc)
-+		goto e_inval;
- 
- 	if (ZERONET(saddr))
- 		spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK);
-@@ -2031,6 +2050,7 @@
- 	rth->u.dst.dev	= &loopback_dev;
- 	dev_hold(rth->u.dst.dev);
- 	rth->idev	= in_dev_get(rth->u.dst.dev);
-+	rth->fl.fl4_gw	= 0;
- 	rth->rt_gateway	= daddr;
- 	rth->rt_spec_dst= spec_dst;
- 	rth->u.dst.input= ip_local_deliver;
-@@ -2080,8 +2100,9 @@
- 	goto e_inval;
- }
- 
--int ip_route_input(struct sk_buff *skb, u32 daddr, u32 saddr,
--		   u8 tos, struct net_device *dev)
-+static inline int
-+ip_route_input_cached(struct sk_buff *skb, u32 daddr, u32 saddr,
-+		      u8 tos, struct net_device *dev, u32 lsrc)
- {
- 	struct rtable * rth;
- 	unsigned	hash;
-@@ -2096,6 +2117,7 @@
- 		if (rth->fl.fl4_dst == daddr &&
- 		    rth->fl.fl4_src == saddr &&
- 		    rth->fl.iif == iif &&
-+		    rth->fl.fl4_lsrc == lsrc &&
- 		    rth->fl.oif == 0 &&
- #ifdef CONFIG_IP_ROUTE_FWMARK
- 		    rth->fl.fl4_fwmark == skb->nfmark &&
-@@ -2144,7 +2166,19 @@
- 		rcu_read_unlock();
- 		return -EINVAL;
- 	}
--	return ip_route_input_slow(skb, daddr, saddr, tos, dev);
-+	return ip_route_input_slow(skb, daddr, saddr, tos, dev, lsrc);
-+}
-+
-+int ip_route_input(struct sk_buff *skb, u32 daddr, u32 saddr,
-+		   u8 tos, struct net_device *dev)
-+{
-+	return ip_route_input_cached(skb, daddr, saddr, tos, dev, 0);
-+}
-+
-+int ip_route_input_lookup(struct sk_buff *skb, u32 daddr, u32 saddr,
-+			  u8 tos, struct net_device *dev, u32 lsrc)
-+{
-+	return ip_route_input_cached(skb, daddr, saddr, tos, dev, lsrc);
- }
- 
- static inline int __mkroute_output(struct rtable **result,
-@@ -2223,6 +2257,7 @@
- 	rth->fl.fl4_tos	= tos;
- 	rth->fl.fl4_src	= oldflp->fl4_src;
- 	rth->fl.oif	= oldflp->oif;
-+	rth->fl.fl4_gw	= oldflp->fl4_gw;
- #ifdef CONFIG_IP_ROUTE_FWMARK
- 	rth->fl.fl4_fwmark= oldflp->fl4_fwmark;
- #endif
-@@ -2370,6 +2405,7 @@
- 	struct flowi fl = { .nl_u = { .ip4_u =
- 				      { .daddr = oldflp->fl4_dst,
- 					.saddr = oldflp->fl4_src,
-+					.gw = oldflp->fl4_gw,
- 					.tos = tos & IPTOS_RT_MASK,
- 					.scope = ((tos & RTO_ONLINK) ?
- 						  RT_SCOPE_LINK :
-@@ -2475,6 +2511,7 @@
- 		dev_out = &loopback_dev;
- 		dev_hold(dev_out);
- 		fl.oif = loopback_dev.ifindex;
-+		fl.fl4_gw = 0;
- 		res.type = RTN_LOCAL;
- 		flags |= RTCF_LOCAL;
- 		goto make_route;
-@@ -2482,7 +2519,7 @@
- 
- 	if (fib_lookup(&fl, &res)) {
- 		res.fi = NULL;
--		if (oldflp->oif) {
-+		if (oldflp->oif && dev_out->flags & IFF_UP) {
- 			/* Apparently, routing tables are wrong. Assume,
- 			   that the destination is on link.
- 
-@@ -2522,6 +2559,7 @@
- 		dev_out = &loopback_dev;
- 		dev_hold(dev_out);
- 		fl.oif = dev_out->ifindex;
-+		fl.fl4_gw = 0;
- 		if (res.fi)
- 			fib_info_put(res.fi);
- 		res.fi = NULL;
-@@ -2529,13 +2567,12 @@
- 		goto make_route;
- 	}
- 
-+	if (res.type == RTN_UNICAST)
-+		fib_select_default(&fl, &res);
- #ifdef CONFIG_IP_ROUTE_MULTIPATH
--	if (res.fi->fib_nhs > 1 && fl.oif == 0)
-+	if (res.fi->fib_nhs > 1)
- 		fib_select_multipath(&fl, &res);
--	else
- #endif
--	if (!res.prefixlen && res.type == RTN_UNICAST && !fl.oif)
--		fib_select_default(&fl, &res);
- 
- 	if (!fl.fl4_src)
- 		fl.fl4_src = FIB_RES_PREFSRC(res);
-@@ -2572,6 +2609,7 @@
- 		    rth->fl.fl4_src == flp->fl4_src &&
- 		    rth->fl.iif == 0 &&
- 		    rth->fl.oif == flp->oif &&
-+		    rth->fl.fl4_gw == flp->fl4_gw &&
- #ifdef CONFIG_IP_ROUTE_FWMARK
- 		    rth->fl.fl4_fwmark == flp->fl4_fwmark &&
- #endif
-@@ -3211,3 +3249,4 @@
- EXPORT_SYMBOL(__ip_select_ident);
- EXPORT_SYMBOL(ip_route_input);
- EXPORT_SYMBOL(ip_route_output_key);
-+EXPORT_SYMBOL(ip_route_input_lookup);
diff --git a/openwrt/target/linux/image/Makefile b/openwrt/target/linux/image/Makefile
deleted file mode 100644
index e64efbf357..0000000000
--- a/openwrt/target/linux/image/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
-
-ifeq ($(BR2_TARGET_ROOTFS_JFFS2),y)
-include ./jffs2.mk
-endif
-
-ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS_LZMA),y)
-include ./squashfs.mk
-endif
-
-ifeq ($(BR2_TARGET_ROOTFS_TGZ),y)
-include ./tgz.mk
-endif
-
-prepare:
-	$(MAKE) prepare-targets $(MAKE_TRACE)
-compile:
-	$(MAKE) compile-targets $(MAKE_TRACE)
-install:
-	$(MAKE) install-targets $(MAKE_TRACE)
-
-.PHONY: prepare compile install
-
-$(BOARD)-compile:
-	@$(TRACE) target/linux/image/$(BOARD)-prepare
-	$(MAKE) -C $(BOARD) prepare
-	@$(TRACE) target/linux/image/$(BOARD)-compile
-	$(MAKE) -C $(BOARD) compile
-
-install-ib:
-	@$(TRACE) target/linux/image/$(BOARD)-install-ib
-	-$(MAKE) -C $(BOARD) IB_DIR="$(IB_DIR)" install-ib
-	mkdir -p $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)
-	$(CP) $(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)/kernel[-_]*.ipk $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)/	
-
-install-prepare:
-	find $(KDIR)/root -type f -not -perm +0100 | xargs chmod 0644
-	find $(KDIR)/root -type f -perm +0100 | xargs chmod 0755
-	find $(KDIR)/root -type d | xargs chmod 0755
-	mkdir -p $(KDIR)/root/tmp
-	chmod 0777 $(KDIR)/root/tmp
-
-rebuild: clean prepare compile install
-clean:
-	$(MAKE) clean-targets $(MAKE_TRACE)
diff --git a/openwrt/target/linux/image/ar7/Makefile b/openwrt/target/linux/image/ar7/Makefile
deleted file mode 100644
index cb29ced02d..0000000000
--- a/openwrt/target/linux/image/ar7/Makefile
+++ /dev/null
@@ -1,126 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/ar7loader
-
-ifeq ($(IB),)
-LOADADDR := 0x94020000
-KERNEL_ENTRY := 0x${shell nm $(KDIR)/linux-$(KERNEL)*/vmlinux | grep kernel_entry | cut -d' ' -f1}
-OUTPUT_FORMAT := elf32-tradlittlemips
-
-CFLAGS := -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
-	-fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
-	-pipe -mlong-calls -fno-common \
-	-mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap \
-	-DLOADADDR=$(LOADADDR)
-
-
-$(PKG_BUILD_DIR):
-	mkdir -p $(PKG_BUILD_DIR)
-
-$(PKG_BUILD_DIR)/zimage.script: src/zimage.script.in
-	sed -e 's/@@OUTPUT_FORMAT@@/$(OUTPUT_FORMAT)/' \
-	    -e 's/@@LOADADDR@@/$(LOADADDR)/' <$< >$@
-
-$(PKG_BUILD_DIR)/ld.script: src/ld.script.in
-	sed -e 's/@@OUTPUT_FORMAT@@/$(OUTPUT_FORMAT)/' \
-	    -e 's/@@LOADADDR@@/$(LOADADDR)/' <$< >$@
-
-$(PKG_BUILD_DIR)/cksum.o: $(PKG_BUILD_DIR)/cksum.c
-	$(HOSTCC) -o $@ $<
-
-$(PKG_BUILD_DIR)/ckmain.o: $(PKG_BUILD_DIR)/ckmain.c
-	$(HOSTCC) -o $@ $<
-
-$(PKG_BUILD_DIR)/tichksum: $(PKG_BUILD_DIR)/ckmain.o $(PKG_BUILD_DIR)/cksum.o
-	$(HOSTCC) -o $@ $<
-
-$(PKG_BUILD_DIR)/LzmaDecode.o: src/LzmaDecode.c
-	$(TARGET_CC) $(CFLAGS) -c -o $@ $<
-
-$(PKG_BUILD_DIR)/loader.o: src/loader.c
-	$(TARGET_CC) $(CFLAGS) -c -o $@ $<
-
-$(STAGING_DIR)/bin/srec2bin: src/srec2bin.c
-	$(HOSTCC) -o $@ $<
-
-$(KDIR)/vmlinux.lzma: $(KDIR)/vmlinux
-	cat $^ | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $@ || (rm -f $@ && false)
-
-$(KDIR)/vmlinux.bin: $(KDIR)/vmlinux.lzma compile
-	$(TARGET_CROSS)ld -T $(PKG_BUILD_DIR)/zimage.script -r -b binary $< -o $(KDIR)/zimage.o
-	$(TARGET_CROSS)ld -static -G 0 --defsym kernel_entry=$(KERNEL_ENTRY) -T $(PKG_BUILD_DIR)/ld.script \
-		$(PKG_BUILD_DIR)/loader.o \
-		$(PKG_BUILD_DIR)/LzmaDecode.o \
-		$(KDIR)/zimage.o \
-		-o $(KDIR)/loader
-	$(TARGET_CROSS)objcopy -O srec $(KDIR)/loader $(KDIR)/ram_zimage.sre
-	$(STAGING_DIR)/bin/srec2bin $(KDIR)/ram_zimage.sre $@
-	
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-kernel.bin: $(KDIR)/vmlinux.bin 
-endif
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-kernel.bin:
-	$(CP) $(KDIR)/vmlinux.bin $@
-
-ifeq ($(FS),jffs2-8MB)
-ALIGN:=bs=131072 conv=sync
-endif
-ifeq ($(FS),jffs2-4MB)
-ALIGN:=bs=65536 conv=sync
-endif
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-kernel.bin
-	dd if=$< $(ALIGN) > $@
-	cat $(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)/root.$(FS) >> $@
-
-define pattern_template
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS)-$(1).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).bin
-	(dd if=/dev/zero bs=16 count=1; cat $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).bin) | \
-		$(STAGING_DIR)/bin/addpattern -p $(1) $(2) -o $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS)-$(1).bin
-
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS)-$(1).bin
-endef
-
-define sercomm_template
-$(BIN_DIR)/openwrt-$(1)-$(KERNEL)-$(FS).img: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).bin
-	cat sercomm/adam2.bin "$$^" > "$$@.tmp"
-	dd if=sercomm/$(1) of="$$@.tmp" bs=$$$$((0x3e0000 - 80)) seek=1 conv=notrunc
-	$(STAGING_DIR)/bin/dgfirmware -f -w "$$@" "$$@.tmp"
-	rm -f "$$@.tmp"
-
-install: $(BIN_DIR)/openwrt-$(1)-$(KERNEL)-$(FS).img
-endef
-
-$(eval $(call sercomm_template,dg834))
-$(eval $(call sercomm_template,jdr454wb))
-
-$(eval $(call pattern_template,AG1B))
-$(eval $(call pattern_template,WA22))
-$(eval $(call pattern_template,WAG2))
-$(eval $(call pattern_template,WA21))
-$(eval $(call pattern_template,WA31,-b))
-$(eval $(call pattern_template,WA32,-b))
-
-ifeq ($(IB),)
-clean:
-	rm -rf $(PKG_BUILD_DIR)
-	rm -f $(BIN_DIR)/openwrt-$(BOARD)*
-
-prepare: $(PKG_BUILD_DIR) $(PKG_BUILD_DIR)/zimage.script $(PKG_BUILD_DIR)/ld.script
-compile: prepare $(PKG_BUILD_DIR)/loader.o $(PKG_BUILD_DIR)/LzmaDecode.o $(STAGING_DIR)/bin/srec2bin
-else
-clean:
-prepare:
-compile:
-endif
-
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-kernel.bin $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).bin
-install-ib:
-	mkdir -p $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)
-	$(CP) $(KDIR)/vmlinux.bin $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)/
-	mkdir -p $(IB_DIR)/staging_dir_$(ARCH)
-	$(CP) $(STAGING_DIR)/bin/addpattern $(IB_DIR)/staging_dir_$(ARCH)/bin/
-	$(CP) $(STAGING_DIR)/bin/dgfirmware $(IB_DIR)/staging_dir_$(ARCH)/bin/
-	
diff --git a/openwrt/target/linux/image/ar7/sercomm/adam2.bin b/openwrt/target/linux/image/ar7/sercomm/adam2.bin
deleted file mode 100644
index d4aa0cd2d3..0000000000
--- a/openwrt/target/linux/image/ar7/sercomm/adam2.bin
+++ /dev/null
diff --git a/openwrt/target/linux/image/ar7/sercomm/dg834 b/openwrt/target/linux/image/ar7/sercomm/dg834
deleted file mode 100644
index 61fe336e85..0000000000
--- a/openwrt/target/linux/image/ar7/sercomm/dg834
+++ /dev/null
diff --git a/openwrt/target/linux/image/ar7/sercomm/jdr454wb b/openwrt/target/linux/image/ar7/sercomm/jdr454wb
deleted file mode 100644
index 821ff1c1af..0000000000
--- a/openwrt/target/linux/image/ar7/sercomm/jdr454wb
+++ /dev/null
diff --git a/openwrt/target/linux/image/ar7/src/LzmaDecode.c b/openwrt/target/linux/image/ar7/src/LzmaDecode.c
deleted file mode 100644
index 951700bddf..0000000000
--- a/openwrt/target/linux/image/ar7/src/LzmaDecode.c
+++ /dev/null
@@ -1,663 +0,0 @@
-/*
-  LzmaDecode.c
-  LZMA Decoder
-  
-  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
-  http://www.7-zip.org/
-
-  LZMA SDK is licensed under two licenses:
-  1) GNU Lesser General Public License (GNU LGPL)
-  2) Common Public License (CPL)
-  It means that you can select one of these two licenses and 
-  follow rules of that license.
-
-  SPECIAL EXCEPTION:
-  Igor Pavlov, as the author of this code, expressly permits you to 
-  statically or dynamically link your code (or bind by name) to the 
-  interfaces of this file without subjecting your linked code to the 
-  terms of the CPL or GNU LGPL. Any modifications or additions 
-  to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#include "LzmaDecode.h"
-
-#ifndef Byte
-#define Byte unsigned char
-#endif
-
-#define kNumTopBits 24
-#define kTopValue ((UInt32)1 << kNumTopBits)
-
-#define kNumBitModelTotalBits 11
-#define kBitModelTotal (1 << kNumBitModelTotalBits)
-#define kNumMoveBits 5
-
-typedef struct _CRangeDecoder
-{
-  Byte *Buffer;
-  Byte *BufferLim;
-  UInt32 Range;
-  UInt32 Code;
-  #ifdef _LZMA_IN_CB
-  ILzmaInCallback *InCallback;
-  int Result;
-  #endif
-  int ExtraBytes;
-} CRangeDecoder;
-
-Byte RangeDecoderReadByte(CRangeDecoder *rd)
-{
-  if (rd->Buffer == rd->BufferLim)
-  {
-    #ifdef _LZMA_IN_CB
-    UInt32 size;
-    rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
-    rd->BufferLim = rd->Buffer + size;
-    if (size == 0)
-    #endif
-    {
-      rd->ExtraBytes = 1;
-      return 0xFF;
-    }
-  }
-  return (*rd->Buffer++);
-}
-
-/* #define ReadByte (*rd->Buffer++) */
-#define ReadByte (RangeDecoderReadByte(rd))
-
-void RangeDecoderInit(CRangeDecoder *rd,
-  #ifdef _LZMA_IN_CB
-    ILzmaInCallback *inCallback
-  #else
-    Byte *stream, UInt32 bufferSize
-  #endif
-    )
-{
-  int i;
-  #ifdef _LZMA_IN_CB
-  rd->InCallback = inCallback;
-  rd->Buffer = rd->BufferLim = 0;
-  #else
-  rd->Buffer = stream;
-  rd->BufferLim = stream + bufferSize;
-  #endif
-  rd->ExtraBytes = 0;
-  rd->Code = 0;
-  rd->Range = (0xFFFFFFFF);
-  for(i = 0; i < 5; i++)
-    rd->Code = (rd->Code << 8) | ReadByte;
-}
-
-#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;        
-#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
-#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
-
-UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
-{
-  RC_INIT_VAR
-  UInt32 result = 0;
-  int i;
-  for (i = numTotalBits; i > 0; i--)
-  {
-    /* UInt32 t; */
-    range >>= 1;
-
-    result <<= 1;
-    if (code >= range)
-    {
-      code -= range;
-      result |= 1;
-    }
-    /*
-    t = (code - range) >> 31;
-    t &= 1;
-    code -= range & (t - 1);
-    result = (result + result) | (1 - t);
-    */
-    RC_NORMALIZE
-  }
-  RC_FLUSH_VAR
-  return result;
-}
-
-int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
-{
-  UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
-  if (rd->Code < bound)
-  {
-    rd->Range = bound;
-    *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
-    if (rd->Range < kTopValue)
-    {
-      rd->Code = (rd->Code << 8) | ReadByte;
-      rd->Range <<= 8;
-    }
-    return 0;
-  }
-  else
-  {
-    rd->Range -= bound;
-    rd->Code -= bound;
-    *prob -= (*prob) >> kNumMoveBits;
-    if (rd->Range < kTopValue)
-    {
-      rd->Code = (rd->Code << 8) | ReadByte;
-      rd->Range <<= 8;
-    }
-    return 1;
-  }
-}
-
-#define RC_GET_BIT2(prob, mi, A0, A1) \
-  UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
-  if (code < bound) \
-    { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
-  else \
-    { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
-  RC_NORMALIZE
-
-#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)               
-
-int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
-{
-  int mi = 1;
-  int i;
-  #ifdef _LZMA_LOC_OPT
-  RC_INIT_VAR
-  #endif
-  for(i = numLevels; i > 0; i--)
-  {
-    #ifdef _LZMA_LOC_OPT
-    CProb *prob = probs + mi;
-    RC_GET_BIT(prob, mi)
-    #else
-    mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
-    #endif
-  }
-  #ifdef _LZMA_LOC_OPT
-  RC_FLUSH_VAR
-  #endif
-  return mi - (1 << numLevels);
-}
-
-int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
-{
-  int mi = 1;
-  int i;
-  int symbol = 0;
-  #ifdef _LZMA_LOC_OPT
-  RC_INIT_VAR
-  #endif
-  for(i = 0; i < numLevels; i++)
-  {
-    #ifdef _LZMA_LOC_OPT
-    CProb *prob = probs + mi;
-    RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
-    #else
-    int bit = RangeDecoderBitDecode(probs + mi, rd);
-    mi = mi + mi + bit;
-    symbol |= (bit << i);
-    #endif
-  }
-  #ifdef _LZMA_LOC_OPT
-  RC_FLUSH_VAR
-  #endif
-  return symbol;
-}
-
-Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
-{ 
-  int symbol = 1;
-  #ifdef _LZMA_LOC_OPT
-  RC_INIT_VAR
-  #endif
-  do
-  {
-    #ifdef _LZMA_LOC_OPT
-    CProb *prob = probs + symbol;
-    RC_GET_BIT(prob, symbol)
-    #else
-    symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
-    #endif
-  }
-  while (symbol < 0x100);
-  #ifdef _LZMA_LOC_OPT
-  RC_FLUSH_VAR
-  #endif
-  return symbol;
-}
-
-Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
-{ 
-  int symbol = 1;
-  #ifdef _LZMA_LOC_OPT
-  RC_INIT_VAR
-  #endif
-  do
-  {
-    int bit;
-    int matchBit = (matchByte >> 7) & 1;
-    matchByte <<= 1;
-    #ifdef _LZMA_LOC_OPT
-    {
-      CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
-      RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
-    }
-    #else
-    bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
-    symbol = (symbol << 1) | bit;
-    #endif
-    if (matchBit != bit)
-    {
-      while (symbol < 0x100)
-      {
-        #ifdef _LZMA_LOC_OPT
-        CProb *prob = probs + symbol;
-        RC_GET_BIT(prob, symbol)
-        #else
-        symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
-        #endif
-      }
-      break;
-    }
-  }
-  while (symbol < 0x100);
-  #ifdef _LZMA_LOC_OPT
-  RC_FLUSH_VAR
-  #endif
-  return symbol;
-}
-
-#define kNumPosBitsMax 4
-#define kNumPosStatesMax (1 << kNumPosBitsMax)
-
-#define kLenNumLowBits 3
-#define kLenNumLowSymbols (1 << kLenNumLowBits)
-#define kLenNumMidBits 3
-#define kLenNumMidSymbols (1 << kLenNumMidBits)
-#define kLenNumHighBits 8
-#define kLenNumHighSymbols (1 << kLenNumHighBits)
-
-#define LenChoice 0
-#define LenChoice2 (LenChoice + 1)
-#define LenLow (LenChoice2 + 1)
-#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
-
-int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
-{
-  if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
-    return RangeDecoderBitTreeDecode(p + LenLow +
-        (posState << kLenNumLowBits), kLenNumLowBits, rd);
-  if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
-    return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
-        (posState << kLenNumMidBits), kLenNumMidBits, rd);
-  return kLenNumLowSymbols + kLenNumMidSymbols + 
-      RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
-}
-
-#define kNumStates 12
-
-#define kStartPosModelIndex 4
-#define kEndPosModelIndex 14
-#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-
-#define kNumPosSlotBits 6
-#define kNumLenToPosStates 4
-
-#define kNumAlignBits 4
-#define kAlignTableSize (1 << kNumAlignBits)
-
-#define kMatchMinLen 2
-
-#define IsMatch 0
-#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-#define IsRepG0 (IsRep + kNumStates)
-#define IsRepG1 (IsRepG0 + kNumStates)
-#define IsRepG2 (IsRepG1 + kNumStates)
-#define IsRep0Long (IsRepG2 + kNumStates)
-#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-#define LenCoder (Align + kAlignTableSize)
-#define RepLenCoder (LenCoder + kNumLenProbs)
-#define Literal (RepLenCoder + kNumLenProbs)
-
-#if Literal != LZMA_BASE_SIZE
-StopCompilingDueBUG
-#endif
-
-#ifdef _LZMA_OUT_READ
-
-typedef struct _LzmaVarState
-{
-  CRangeDecoder RangeDecoder;
-  Byte *Dictionary;
-  UInt32 DictionarySize;
-  UInt32 DictionaryPos;
-  UInt32 GlobalPos;
-  UInt32 Reps[4];
-  int lc;
-  int lp;
-  int pb;
-  int State;
-  int PreviousIsMatch;
-  int RemainLen;
-} LzmaVarState;
-
-int LzmaDecoderInit(
-    unsigned char *buffer, UInt32 bufferSize,
-    int lc, int lp, int pb,
-    unsigned char *dictionary, UInt32 dictionarySize,
-    #ifdef _LZMA_IN_CB
-    ILzmaInCallback *inCallback
-    #else
-    unsigned char *inStream, UInt32 inSize
-    #endif
-    )
-{
-  LzmaVarState *vs = (LzmaVarState *)buffer;
-  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
-  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
-  UInt32 i;
-  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
-    return LZMA_RESULT_NOT_ENOUGH_MEM;
-  vs->Dictionary = dictionary;
-  vs->DictionarySize = dictionarySize;
-  vs->DictionaryPos = 0;
-  vs->GlobalPos = 0;
-  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
-  vs->lc = lc;
-  vs->lp = lp;
-  vs->pb = pb;
-  vs->State = 0;
-  vs->PreviousIsMatch = 0;
-  vs->RemainLen = 0;
-  dictionary[dictionarySize - 1] = 0;
-  for (i = 0; i < numProbs; i++)
-    p[i] = kBitModelTotal >> 1; 
-  RangeDecoderInit(&vs->RangeDecoder, 
-      #ifdef _LZMA_IN_CB
-      inCallback
-      #else
-      inStream, inSize
-      #endif
-  );
-  return LZMA_RESULT_OK;
-}
-
-int LzmaDecode(unsigned char *buffer, 
-    unsigned char *outStream, UInt32 outSize,
-    UInt32 *outSizeProcessed)
-{
-  LzmaVarState *vs = (LzmaVarState *)buffer;
-  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
-  CRangeDecoder rd = vs->RangeDecoder;
-  int state = vs->State;
-  int previousIsMatch = vs->PreviousIsMatch;
-  Byte previousByte;
-  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
-  UInt32 nowPos = 0;
-  UInt32 posStateMask = (1 << (vs->pb)) - 1;
-  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
-  int lc = vs->lc;
-  int len = vs->RemainLen;
-  UInt32 globalPos = vs->GlobalPos;
-
-  Byte *dictionary = vs->Dictionary;
-  UInt32 dictionarySize = vs->DictionarySize;
-  UInt32 dictionaryPos = vs->DictionaryPos;
-
-  if (len == -1)
-  {
-    *outSizeProcessed = 0;
-    return LZMA_RESULT_OK;
-  }
-
-  while(len > 0 && nowPos < outSize)
-  {
-    UInt32 pos = dictionaryPos - rep0;
-    if (pos >= dictionarySize)
-      pos += dictionarySize;
-    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
-    if (++dictionaryPos == dictionarySize)
-      dictionaryPos = 0;
-    len--;
-  }
-  if (dictionaryPos == 0)
-    previousByte = dictionary[dictionarySize - 1];
-  else
-    previousByte = dictionary[dictionaryPos - 1];
-#else
-
-int LzmaDecode(
-    Byte *buffer, UInt32 bufferSize,
-    int lc, int lp, int pb,
-    #ifdef _LZMA_IN_CB
-    ILzmaInCallback *inCallback,
-    #else
-    unsigned char *inStream, UInt32 inSize,
-    #endif
-    unsigned char *outStream, UInt32 outSize,
-    UInt32 *outSizeProcessed)
-{
-  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
-  CProb *p = (CProb *)buffer;
-  CRangeDecoder rd;
-  UInt32 i;
-  int state = 0;
-  int previousIsMatch = 0;
-  Byte previousByte = 0;
-  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
-  UInt32 nowPos = 0;
-  UInt32 posStateMask = (1 << pb) - 1;
-  UInt32 literalPosMask = (1 << lp) - 1;
-  int len = 0;
-  if (bufferSize < numProbs * sizeof(CProb))
-    return LZMA_RESULT_NOT_ENOUGH_MEM;
-  for (i = 0; i < numProbs; i++)
-    p[i] = kBitModelTotal >> 1; 
-  RangeDecoderInit(&rd, 
-      #ifdef _LZMA_IN_CB
-      inCallback
-      #else
-      inStream, inSize
-      #endif
-      );
-#endif
-
-  *outSizeProcessed = 0;
-  while(nowPos < outSize)
-  {
-    int posState = (int)(
-        (nowPos 
-        #ifdef _LZMA_OUT_READ
-        + globalPos
-        #endif
-        )
-        & posStateMask);
-    #ifdef _LZMA_IN_CB
-    if (rd.Result != LZMA_RESULT_OK)
-      return rd.Result;
-    #endif
-    if (rd.ExtraBytes != 0)
-      return LZMA_RESULT_DATA_ERROR;
-    if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
-    {
-      CProb *probs = p + Literal + (LZMA_LIT_SIZE * 
-        (((
-        (nowPos 
-        #ifdef _LZMA_OUT_READ
-        + globalPos
-        #endif
-        )
-        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-
-      if (state < 4) state = 0;
-      else if (state < 10) state -= 3;
-      else state -= 6;
-      if (previousIsMatch)
-      {
-        Byte matchByte;
-        #ifdef _LZMA_OUT_READ
-        UInt32 pos = dictionaryPos - rep0;
-        if (pos >= dictionarySize)
-          pos += dictionarySize;
-        matchByte = dictionary[pos];
-        #else
-        matchByte = outStream[nowPos - rep0];
-        #endif
-        previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
-        previousIsMatch = 0;
-      }
-      else
-        previousByte = LzmaLiteralDecode(probs, &rd);
-      outStream[nowPos++] = previousByte;
-      #ifdef _LZMA_OUT_READ
-      dictionary[dictionaryPos] = previousByte;
-      if (++dictionaryPos == dictionarySize)
-        dictionaryPos = 0;
-      #endif
-    }
-    else             
-    {
-      previousIsMatch = 1;
-      if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
-      {
-        if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
-        {
-          if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
-          {
-            #ifdef _LZMA_OUT_READ
-            UInt32 pos;
-            #endif
-            if (
-               (nowPos 
-                #ifdef _LZMA_OUT_READ
-                + globalPos
-                #endif
-               )
-               == 0)
-              return LZMA_RESULT_DATA_ERROR;
-            state = state < 7 ? 9 : 11;
-            #ifdef _LZMA_OUT_READ
-            pos = dictionaryPos - rep0;
-            if (pos >= dictionarySize)
-              pos += dictionarySize;
-            previousByte = dictionary[pos];
-            dictionary[dictionaryPos] = previousByte;
-            if (++dictionaryPos == dictionarySize)
-              dictionaryPos = 0;
-            #else
-            previousByte = outStream[nowPos - rep0];
-            #endif
-            outStream[nowPos++] = previousByte;
-            continue;
-          }
-        }
-        else
-        {
-          UInt32 distance;
-          if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
-            distance = rep1;
-          else 
-          {
-            if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
-              distance = rep2;
-            else
-            {
-              distance = rep3;
-              rep3 = rep2;
-            }
-            rep2 = rep1;
-          }
-          rep1 = rep0;
-          rep0 = distance;
-        }
-        len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
-        state = state < 7 ? 8 : 11;
-      }
-      else
-      {
-        int posSlot;
-        rep3 = rep2;
-        rep2 = rep1;
-        rep1 = rep0;
-        state = state < 7 ? 7 : 10;
-        len = LzmaLenDecode(p + LenCoder, &rd, posState);
-        posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
-            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
-            kNumPosSlotBits), kNumPosSlotBits, &rd);
-        if (posSlot >= kStartPosModelIndex)
-        {
-          int numDirectBits = ((posSlot >> 1) - 1);
-          rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
-          if (posSlot < kEndPosModelIndex)
-          {
-            rep0 += RangeDecoderReverseBitTreeDecode(
-                p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
-          }
-          else
-          {
-            rep0 += RangeDecoderDecodeDirectBits(&rd, 
-                numDirectBits - kNumAlignBits) << kNumAlignBits;
-            rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
-          }
-        }
-        else
-          rep0 = posSlot;
-        rep0++;
-      }
-      if (rep0 == (UInt32)(0))
-      {
-        /* it's for stream version */
-        len = -1;
-        break;
-      }
-      if (rep0 > nowPos 
-        #ifdef _LZMA_OUT_READ
-        + globalPos
-        #endif
-        )
-      {
-        return LZMA_RESULT_DATA_ERROR;
-      }
-      len += kMatchMinLen;
-      do
-      {
-        #ifdef _LZMA_OUT_READ
-        UInt32 pos = dictionaryPos - rep0;
-        if (pos >= dictionarySize)
-          pos += dictionarySize;
-        previousByte = dictionary[pos];
-        dictionary[dictionaryPos] = previousByte;
-        if (++dictionaryPos == dictionarySize)
-          dictionaryPos = 0;
-        #else
-        previousByte = outStream[nowPos - rep0];
-        #endif
-        outStream[nowPos++] = previousByte;
-        len--;
-      }
-      while(len > 0 && nowPos < outSize);
-    }
-  }
-
-  #ifdef _LZMA_OUT_READ
-  vs->RangeDecoder = rd;
-  vs->DictionaryPos = dictionaryPos;
-  vs->GlobalPos = globalPos + nowPos;
-  vs->Reps[0] = rep0;
-  vs->Reps[1] = rep1;
-  vs->Reps[2] = rep2;
-  vs->Reps[3] = rep3;
-  vs->State = state;
-  vs->PreviousIsMatch = previousIsMatch;
-  vs->RemainLen = len;
-  #endif
-
-  *outSizeProcessed = nowPos;
-  return LZMA_RESULT_OK;
-}
diff --git a/openwrt/target/linux/image/ar7/src/LzmaDecode.h b/openwrt/target/linux/image/ar7/src/LzmaDecode.h
deleted file mode 100644
index f58944e3c3..0000000000
--- a/openwrt/target/linux/image/ar7/src/LzmaDecode.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* 
-  LzmaDecode.h
-  LZMA Decoder interface
-
-  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
-  http://www.7-zip.org/
-
-  LZMA SDK is licensed under two licenses:
-  1) GNU Lesser General Public License (GNU LGPL)
-  2) Common Public License (CPL)
-  It means that you can select one of these two licenses and 
-  follow rules of that license.
-
-  SPECIAL EXCEPTION:
-  Igor Pavlov, as the author of this code, expressly permits you to 
-  statically or dynamically link your code (or bind by name) to the 
-  interfaces of this file without subjecting your linked code to the 
-  terms of the CPL or GNU LGPL. Any modifications or additions 
-  to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#ifndef __LZMADECODE_H
-#define __LZMADECODE_H
-
-/* #define _LZMA_IN_CB */
-/* Use callback for input data */
-
-/* #define _LZMA_OUT_READ */
-/* Use read function for output data */
-
-/* #define _LZMA_PROB32 */
-/* It can increase speed on some 32-bit CPUs, 
-   but memory usage will be doubled in that case */
-
-/* #define _LZMA_LOC_OPT */
-/* Enable local speed optimizations inside code */
-
-#ifndef UInt32
-#ifdef _LZMA_UINT32_IS_ULONG
-#define UInt32 unsigned long
-#else
-#define UInt32 unsigned int
-#endif
-#endif
-
-#ifdef _LZMA_PROB32
-#define CProb UInt32
-#else
-#define CProb unsigned short
-#endif
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-#define LZMA_RESULT_NOT_ENOUGH_MEM 2
-
-#ifdef _LZMA_IN_CB
-typedef struct _ILzmaInCallback
-{
-  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
-} ILzmaInCallback;
-#endif
-
-#define LZMA_BASE_SIZE 1846
-#define LZMA_LIT_SIZE 768
-
-/* 
-bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
-bufferSize += 100 in case of _LZMA_OUT_READ
-by default CProb is unsigned short, 
-but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
-*/
-
-#ifdef _LZMA_OUT_READ
-int LzmaDecoderInit(
-    unsigned char *buffer, UInt32 bufferSize,
-    int lc, int lp, int pb,
-    unsigned char *dictionary, UInt32 dictionarySize,
-  #ifdef _LZMA_IN_CB
-    ILzmaInCallback *inCallback
-  #else
-    unsigned char *inStream, UInt32 inSize
-  #endif
-);
-#endif
-
-int LzmaDecode(
-    unsigned char *buffer, 
-  #ifndef _LZMA_OUT_READ
-    UInt32 bufferSize,
-    int lc, int lp, int pb,
-  #ifdef _LZMA_IN_CB
-    ILzmaInCallback *inCallback,
-  #else
-    unsigned char *inStream, UInt32 inSize,
-  #endif
-  #endif
-    unsigned char *outStream, UInt32 outSize,
-    UInt32 *outSizeProcessed);
-
-#endif
diff --git a/openwrt/target/linux/image/ar7/src/gzip.h b/openwrt/target/linux/image/ar7/src/gzip.h
deleted file mode 100644
index 917e66655c..0000000000
--- a/openwrt/target/linux/image/ar7/src/gzip.h
+++ /dev/null
@@ -1,51 +0,0 @@
-//bvb#include "timemmap.h"
-
-#define OF(args)  args
-#define STATIC static
-
-#define WSIZE 0x8000		/* Slideing window size (defined as var
-				 * "window" below) must be at least 32k, 
-				 * and a power of two.  This is the
-				 * data work window used for input buffer
-				 * by the input routine */
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-
-static char *output_data;
-static ulg output_ptr;
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-#define NOMEMCPY                /* Does routine memcpy exist? */
-
-//bvb static uch *inbuf;		/* input buffer */
-static uch *window;
-
-//bvb static uch outwin[WSIZE];
-
-//bvb static unsigned insize;		/* valid bytes in inbuf */
-static unsigned inptr;		/* index of next byte to process in inbuf */
-
-static unsigned outcnt;		/* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */
-#define BMAX 16         /* maximum bit length of any code (16 for explode) */
-#define N_MAX 288       /* maximum number of codes in any set */
-
-static char *input_data;
-
-static void *freememstart;
diff --git a/openwrt/target/linux/image/ar7/src/ld.script.in b/openwrt/target/linux/image/ar7/src/ld.script.in
deleted file mode 100644
index 40389e644f..0000000000
--- a/openwrt/target/linux/image/ar7/src/ld.script.in
+++ /dev/null
@@ -1,34 +0,0 @@
-	OUTPUT_FORMAT("@@OUTPUT_FORMAT@@")
-	OUTPUT_ARCH(mips)
-ENTRY(tikernelunzip)
-	SECTIONS
-{
-
-	/* Allocate memory space on top of kernel bss space */
-	. = 0x94200000;
-	.text :
-	{
-		*(.text)
-		*(.rodata)
-		*(.rodata1)
-		*(.gnu.warning)
-		*(.text.init)
-		*(.data.init)
-	}                    
-
-	.data :
-	{
-		*(*)
-	}
-
-	.bss :
-	{
-		*(.dynbss)
-		*(COMMON)
-		*(.bss)
-		*(.sbss)
-		*(.scommon)
-		. = ALIGN (0x8000);
-		workspace = .;
-	}
-}
diff --git a/openwrt/target/linux/image/ar7/src/loader.c b/openwrt/target/linux/image/ar7/src/loader.c
deleted file mode 100644
index 22b909d7e9..0000000000
--- a/openwrt/target/linux/image/ar7/src/loader.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/* inflate.c -- Not copyrighted 1992 by Mark Adler
-   version c10p1, 10 January 1993 */
-
-/*
- * Adapted for booting Linux by Hannu Savolainen 1993
- * based on gzip-1.0.3
- *
- * Nicolas Pitre <nico@visuaide.com>, 1999/04/14 :
- *   Little mods for all variable to reside either into rodata or bss segments
- *   by marking constant variables with 'const' and initializing all the others
- *   at run-time only.  This allows for the kernel uncompressor to run
- *   directly from Flash or ROM memory on embeded systems.
- */
-
-#include <linux/config.h>
-#include "gzip.h"
-#include "LzmaDecode.h"
-
-/* Function prototypes */
-unsigned char get_byte(void);
-int tikernelunzip(int,char *[], char *[]);
-static int tidecompress(uch *, uch *);
-
-void kernel_entry(int, char *[], char *[]);
-void (*ke)(int, char *[], char *[]); /* Gen reference to kernel function */
-void (*prnt)(unsigned int, char *);		/* Gen reference to Yamon print function */
-void printf(char *ptr);			/* Generate our own printf */
-
-int tikernelunzip(int argc, char *argv[], char *arge[])
-{
-	extern unsigned int _ftext;
-	extern uch kernelimage[];
-	uch *in, *out;
-	int status;
-
-	printf("Launching kernel decompressor.\n");
-
-	out = (unsigned char *) LOADADDR;
-	in = &(kernelimage[0]);
-
-	status = tidecompress(in, out);
-
-	if (status == 0) {
-		printf("Kernel decompressor was successful ... launching kernel.\n");
-
-		ke = ( void(*)(int, char *[],char*[]))kernel_entry;
-		(*ke)(argc,argv,arge);
-
-		return (0);
-	} else {
-		printf("Error in decompression.\n");
-		return(1);
-	}
-}
-
-#if 0
-char hex[] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'};
-void print_i(int i)
-{
-	int j;
-	char buf[11];
-
-	buf[0] = '0';
-	buf[1] = 'x';
-	buf[10] = 0;
-	
-	for (j = 0; j < 8; j++)
-	{
-		buf[2 + 7 - j] = hex[i & 0xf];
-		i = i >> 4;
-	}
-
-	printf(buf);
-}
-#endif
-
-int tidecompress(uch *indata, uch *outdata)
-{
-	extern unsigned int workspace;
-	extern unsigned char kernelimage[], kernelimage_end[];
-	unsigned int i;  /* temp value */
-	unsigned int lc; /* literal context bits */
-	unsigned int lp; /* literal pos state bits */
-	unsigned int pb; /* pos state bits */
-	unsigned int osize; /* uncompressed size */
-	unsigned int wsize; /* window size */
-	unsigned int insize = kernelimage_end - kernelimage;
-	int status;
-	
-	output_ptr = 0;
-	output_data = outdata;
-	input_data = indata;
-
-	/* lzma args */
-	i = get_byte();
-	lc = i % 9, i = i / 9;
-	lp = i % 5, pb = i / 5;
-
-	/* skip rest of the LZMA coder property */
-	for (i = 0; i < 4; i++)
-		get_byte();
-	
-	/* read the lower half of uncompressed size in the header */
-	osize = ((unsigned int)get_byte()) +
-		((unsigned int)get_byte() << 8) +
-		((unsigned int)get_byte() << 16) +
-		((unsigned int)get_byte() << 24);
-
-	/* skip rest of the header (upper half of uncompressed size) */
-	for (i = 0; i < 4; i++)
-		get_byte();
-	
-	i = 0;
-	wsize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp))) * sizeof(CProb);
-
-	if ((status = LzmaDecode((unsigned char *) &workspace, wsize, lc, lp, pb,
-		indata + 13, insize - 13, (unsigned char *) output_data, osize, &i)) == LZMA_RESULT_OK)
-			return 0;
-
-	return status;
-}
-
-
-void printf(char *ptr)
-{
-	unsigned int *tempptr = (unsigned int  *)0x90000534;
-	prnt = ( void (*)(unsigned int, char *)) *tempptr;
-	(*prnt)(0,ptr);
-}
-
-unsigned char get_byte()
-{
-	unsigned char c;
-	
-	c = *input_data;
-	input_data++;
-
-	return c;
-}
-
diff --git a/openwrt/target/linux/image/ar7/src/srec2bin.c b/openwrt/target/linux/image/ar7/src/srec2bin.c
deleted file mode 100644
index 0eb8b2023a..0000000000
--- a/openwrt/target/linux/image/ar7/src/srec2bin.c
+++ /dev/null
@@ -1,523 +0,0 @@
-#include <stdio.h>
-#include <ctype.h>
-
-//Rev 0.1 Original
-// 8 Jan 2001  MJH  Added code to write data to Binary file
-//                  note: outputfile is name.bin, where name is first part
-//                  of input file.  ie tmp.rec -> tmp.bin
-//
-//   srec2bin <input SREC file> <Output Binary File> <If Present, Big Endian>
-//
-//   TAG   
-//        bit32u TAG_BIG     = 0xDEADBE42;
-//        bit32u TAG_LITTLE  = 0xFEEDFA42;
-//
-//  File Structure
-//
-//  TAG    :   32 Bits
-//  [DATA RECORDS]
-//
-//  Data Records Structure
-//
-//  LENGTH  :  32 Bits    <- Length of DATA, excludes ADDRESS and CHECKSUM
-//  ADDRESS :  32 Bits
-//  DATA    :  8 Bits * LENGTH
-//  CHECKSUM:  32 Bits    <-  0 - (Sum of Length --> End of Data)
-//
-//  Note : If Length == 0, Address will be Program Start
-//
-//
-//  
-//
-//
-
-#define MajRevNum 0
-#define MinRevNum 2
-
-
-#define EndianSwitch(x) ((x >> 24) | (x << 24) | ((x << 8) & (0x00FF0000)) | ((x >> 8) & (0x0000FF00)) )
-
-typedef unsigned char bit8u;
-typedef unsigned int bit32u;
-typedef int bit32;
-
-#define FALSE 0
-#define TRUE (!FALSE)
-
-
-bit32u CheckSum;
-int RecStart;
-int debug;
-int verbose;
-
-FILE *OpenOutputFile( char *Name );
-FILE *fOut;
-bit32u RecLength=0;
-
-bit32u AddressCurrent;
-
-bit32u gh(char *cp,int nibs);
-
-int BigEndian;
-
-int inputline;
-
-// char buf[16*1024];
-
-char buffer[2048];
-char *cur_ptr;
-int cur_line=0;
-int cur_len=0;
-
-int s1s2s3_total=0;
-
-bit32u PBVal;
-int    PBValid;
-bit32u PBAdr;
-
-
-void dumpfTell(char *s, bit32u Value)
-{
-    int Length;
-    Length = (int) RecLength;
-    if (debug)
-          printf("[%s  ] ftell()[0x%08lX] Length[0x%4X] Length[%4d] Value[0x%08x]\n",
-                s, ftell(fOut), Length, Length, Value);
-}
-
-void DispHex(bit32u Hex)
-{
-//    printf("%X", Hex);
-}
-
-void WaitDisplay(void)
-{
-   static int Count=0;
-   static int Index=0;
-   char iline[]={"-\\|/"};
-
-   Count++;
-   if ((Count % 32)==0)
-   {
-     if (verbose)
-        printf("%c%c",iline[Index++],8);
-     Index &= 3;
-   }
-}
-
-
-void binOut32 ( bit32u Data )
-{
-// On UNIX machine all 32bit writes need ENDIAN switched
-//    Data = EndianSwitch(Data);
-//    fwrite( &Data, sizeof(bit32u), 1, fOut);
-
-   char sdat[4];
-   int i;
-
-   for(i=0;i<4;i++)
-    sdat[i]=(char)(Data>>(i*8));
-   fwrite( sdat, 1, 4, fOut);
-   dumpfTell("Out32" , Data);
-}
-
-// Only update RecLength on Byte Writes
-// All 32 bit writes will be for Length etc
-
-void binOut8 ( bit8u Data )
-{
-    int n;
-    dumpfTell("B4Data" , (bit32u) (Data & 0xFF) );
-    n = fwrite( &Data, sizeof(bit8u), 1, fOut);
-    if (n != 1)
-        printf("Error in writing %X for Address 0x%8X\n", Data, AddressCurrent);
-    RecLength += 1;
-}
-
-//  Currently ONLY used for outputting Program Start
-
-void binRecStart(bit32u Address)
-{
-    RecLength      = 0;
-    CheckSum       = Address;
-    RecStart       = TRUE;
-
-    if (debug)
-          printf("[RecStart] CheckSum[0x%08X] Length[%4d] Address[0x%08X]\n",
-                CheckSum, RecLength, Address);
-
-
-    dumpfTell("RecLength", RecLength);
-    binOut32( RecLength );
-    dumpfTell("Address", Address);
-    binOut32( Address );
-}
-
-void binRecEnd(void)
-{
-    long RecEnd;
-
-    if (!RecStart)   //  if no record started, do not end it
-    {
-        return;
-    }
-
-    RecStart = FALSE;
-
-
-    RecEnd = ftell(fOut);         // Save Current position
-
-    if (debug)
-          printf("[RecEnd  ] CheckSum[0x%08X] Length[%4d] Length[0x%X] RecEnd[0x%08lX]\n",
-                CheckSum, RecLength, RecLength, RecEnd);
-
-    fseek( fOut, -((long) RecLength), SEEK_CUR);  // move back Start Of Data
-
-    dumpfTell("Data   ", -1);
-
-    fseek( fOut, -4, SEEK_CUR);  // move back Start Of Address
-
-    dumpfTell("Address   ", -1);
-
-    fseek( fOut, -4, SEEK_CUR);  // move back Start Of Length
-
-    dumpfTell("Length   ", -1);
-
-    binOut32( RecLength );
-
-    fseek( fOut, RecEnd, SEEK_SET);  // move to end of Record
-
-    CheckSum += RecLength;
-
-    CheckSum =  ~CheckSum + 1;  // Two's complement
-
-    binOut32( CheckSum );
-
-    if (verbose)
-        printf("[Created Record of %d Bytes with CheckSum [0x%8X]\n", RecLength, CheckSum);
-}
-
-void binRecOutProgramStart(bit32u Address)
-{
-    if (Address != (AddressCurrent+1))
-    {
-        binRecEnd();
-        binRecStart(Address);
-    }
-    AddressCurrent = Address;
-}
-void binRecOutByte(bit32u Address, bit8u Data)
-{
-    //  If Address is one after Current Address, output Byte
-    //  If not, close out last record, update Length, write checksum
-    //  Then Start New Record, updating Current Address
-
-    if (Address != (AddressCurrent+1))
-    {
-        binRecEnd();
-        binRecStart(Address);
-    }
-    AddressCurrent = Address;
-    CheckSum += Data;
-    binOut8( Data );
-}
-
-//=============================================================================
-//       SUPPORT FUNCTIONS
-//=============================================================================
-int readline(FILE *fil,char *buf,int len)
-{
-    int rlen;
-    
-    rlen=0;
-    if (len==0)  return(0);
-    while(1)
-    {
-      if (cur_len==0)
-      {
-        cur_len=fread(buffer, 1, sizeof(buffer), fil);
-        if (cur_len==0)
-        {
-          if (rlen)
-          {
-            *buf=0;
-            return(rlen);
-          }
-          return(-1);
-        }
-        cur_ptr=buffer;
-      }
-      if (cur_len)
-      {
-        if (*cur_ptr=='\n')
-        {
-          *buf=0;
-          cur_ptr++;
-          cur_len--;
-          return(rlen);
-        }
-         else
-         {
-           if ((len>1)&&(*cur_ptr!='\r'))
-           {
-             *buf++=*cur_ptr++;
-             len--;
-           }
-           else
-             cur_ptr++;
-
-           rlen++;
-           cur_len--;
-         }
-      }
-      else
-      {
-        *buf=0;
-        cur_ptr++;
-        cur_len--;
-        return(rlen);
-      }
-    }
-}
-
-
-int SRLerrorout(char *c1,char *c2)
-{
-  printf("\nERROR: %s - '%s'.",c1,c2);
-  return(FALSE);
-}
-
-
-int checksum(char *cp,int count)
-{
-  char *scp;
-  int cksum;
-  int dum;
-
-  scp=cp;
-  while(*scp)
-  {
-    if (!isxdigit(*scp++))
-      return(SRLerrorout("Invalid hex digits",cp));
-  }
-  scp=cp;
-
-  cksum=count;
-
-  while(count)
-  {
-    cksum += gh(scp,2);
-    if (count == 2)
-        dum = ~cksum;
-    scp += 2;
-    count--;
-  }
-  cksum&=0x0ff; 
-  //  printf("\nCk:%02x",cksum);
-  return(cksum==0x0ff);
-}
-
-bit32u gh(char *cp,int nibs)
-{
-  int i;
-  bit32u j;
-
-  j=0;
-
-  for(i=0;i<nibs;i++)
-  {
-    j<<=4;
-    if ((*cp>='a')&&(*cp<='z')) *cp &= 0x5f;
-    if ((*cp>='0')&&(*cp<='9')) 
-      j += (*cp-0x30);
-     else
-      if ((*cp>='A')&&(*cp<='F'))
-        j += (*cp-0x37);
-       else
-        SRLerrorout("Bad Hex char", cp);
-    cp++;
-  }
-  return(j);
-}
-
-
-//=============================================================================
-//       PROCESS SREC LINE
-//=============================================================================
-
-int srecLine(char *pSrecLine)
-{
-    char *scp,ch;
-    int  itmp,count,dat;
-    bit32u adr;
-    static bit32u RecordCounter=0;
-
-    cur_line++;
-    scp=pSrecLine;
-  
-    if (*pSrecLine!='S')
-      return(SRLerrorout("Not an Srecord file",scp));
-    pSrecLine++;
-    if (strlen(pSrecLine)<4)
-      return(SRLerrorout("Srecord too short",scp));
-  
-    ch=*pSrecLine++;
-  
-    count=gh(pSrecLine,2);
-  
-    pSrecLine += 2;
-  
-  //  if(debug)
-  //        printf("count %d, strlen(pSrecLine) = %d, pSrecLine =[%s]\n", count, strlen(pSrecLine), pSrecLine);
-     RecordCounter++;
-     DispHex(RecordCounter);
-  
-    if ((count*2) != strlen(pSrecLine)) return(SRLerrorout("Count field larger than record",scp));
-  
-    if (!checksum(pSrecLine, count)) return(SRLerrorout("Bad Checksum",scp));
-  
-    switch(ch)
-    {
-        case '0': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
-                  itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2;
-                  if (itmp) return(SRLerrorout("Srecord 1 address not zero",scp));
-        break;
-        case '1': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
-                  return(SRLerrorout("Srecord Not valid for MIPS",scp));
-        break;
-        case '2': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp));
-                  return(SRLerrorout("Srecord Not valid for MIPS",scp));
-        break;
-        case '3': if (count<5) return(SRLerrorout("Invalid Srecord count field",scp));
-                  adr=gh(pSrecLine,8); pSrecLine+=8; count-=4;
-                  count--;
-                  while(count)
-                  {
-                    dat=gh(pSrecLine,2); pSrecLine+=2; count--;
-                    binRecOutByte(adr, (char) (dat & 0xFF));
-                    adr++;
-                  }
-                  s1s2s3_total++;
-        break;
-        case '4': return(SRLerrorout("Invalid Srecord type",scp));
-        break;
-        case '5': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
-                  itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2;
-                  if (itmp|=s1s2s3_total) return(SRLerrorout("Incorrect number of S3 Record processed",scp));
-        break;
-        case '6': return(SRLerrorout("Invalid Srecord type",scp));
-        break;
-        case '7': // PROGRAM START
-                  if (count<5) return(SRLerrorout("Invalid Srecord count field",scp));
-                  adr=gh(pSrecLine,8); pSrecLine+=8; count-=4;
-                  if (count!=1) return(SRLerrorout("Invalid Srecord count field",scp));
-                  binRecOutProgramStart(adr);
-        break;
-        case '8': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp));
-                  return(SRLerrorout("Srecord Not valid for MIPS",scp));
-        break;
-        case '9': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
-                  return(SRLerrorout("Srecord Not valid for MIPS",scp));
-        break;
-        default:
-        break;
-    }
-    return(TRUE);
-}
- 
-
-//=============================================================================
-//       MAIN LOGIC, READS IN LINE AND OUTPUTS BINARY
-//=============================================================================
-
-int srec2bin(int argc,char *argv[],int verbose)
-{
-    int i,rlen,sts;
-    FILE *fp;
-    char ac;
-    char buff[256];
-    bit32u TAG_BIG     = 0xDEADBE42;
-    bit32u TAG_LITTLE  = 0xFEEDFA42;
-
-    bit32u Tag;
-
-  
-    if(argc < 3)
-    {
-      printf("\nError: <srec2bin <srec input file> <bin output file>\n\n");
-      return(0);
-    }
-  
-    if (argc > 3) BigEndian=TRUE; else BigEndian=FALSE;
-
-    if (BigEndian)
-        Tag = TAG_BIG;
-    else
-        Tag = TAG_LITTLE;
-
-    if (verbose)
-       printf("\nEndian: %s, Tag is 0x%8X\n",(BigEndian)?"BIG":"LITTLE", Tag);
-
-    fp = fopen(argv[1],"rt");
-
-    if (fp==NULL)
-    {
-      printf("\nError: Opening input file, %s.", argv[1]);
-      return(0);
-    }
-  
-    fOut = fopen( argv[2], "wb");
-    
-    if (fOut==NULL)
-    {
-      printf("\nError: Opening Output file, %s.", argv[2]);
-      if(fp) fclose(fp);
-      return(0);
-    }
- 
-    RecStart = FALSE;
-
-    AddressCurrent = 0xFFFFFFFFL;
-
-    // Setup Tag 
-  
-    dumpfTell("Tag", Tag);
-
-    binOut32(Tag);
-
-  
-    inputline=0;
-    sts=TRUE;
-
-    rlen = readline(fp,buff,sizeof buff);
-
-    while( (sts) && (rlen != -1))
-    {
-        if (strlen(buff))
-        {
-            sts &= srecLine(buff);
-            WaitDisplay();
-        }
-       rlen = readline(fp,buff,sizeof buff);
-    }
-
-  
-  //  printf("PC: 0x%08X, Length 0x%08X, Tag 0x%08X\n", ProgramStart, RecLength, TAG_LITTLE);
-  
-    binRecEnd();
-
-    if(fp) fclose(fp);
-    if(fOut) fclose(fOut);
-
-    return(1);
-}
-
-main(int argc, char *argv[])
-{
-    debug = TRUE;
-    debug = FALSE;
-    verbose = FALSE;
-    srec2bin(argc,argv,verbose);
-    return 0;
-}
-
diff --git a/openwrt/target/linux/image/ar7/src/zimage.script.in b/openwrt/target/linux/image/ar7/src/zimage.script.in
deleted file mode 100644
index 1a0865b086..0000000000
--- a/openwrt/target/linux/image/ar7/src/zimage.script.in
+++ /dev/null
@@ -1,11 +0,0 @@
-	OUTPUT_FORMAT("@@OUTPUT_FORMAT@@")
-OUTPUT_ARCH(mips)
-	SECTIONS
-{
-	.data :
-	{
-		kernelimage = .;
-		*(.data)
-		kernelimage_end = .;
-	}
-}
diff --git a/openwrt/target/linux/image/aruba/Makefile b/openwrt/target/linux/image/aruba/Makefile
deleted file mode 100644
index a2cceaf0c1..0000000000
--- a/openwrt/target/linux/image/aruba/Makefile
+++ /dev/null
@@ -1,66 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-LOADADDR = 0x81000000		# RAM start + 16M 
-KERNEL_ENTRY = 0x80100000
-RAMSIZE = 0x00100000		# 1MB
-
-LOADER_MAKEOPTS= \
-		KDIR=$(KDIR) \
-		LOADADDR=$(LOADADDR) \
-		KERNEL_ENTRY=$(KERNEL_ENTRY) \
-		RAMSIZE=$(RAMSIZE)
-
-KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
-
-lzma-loader-clean:
-	$(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean
-
-lzma-loader-prepare:
-	$(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) prepare
-
-lzma-loader-compile: $(KDIR)/vmlinux.lzma lzma-loader-prepare
-	$(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) compile
-
-ifeq ($(IB),)
-$(KDIR)/vmlinux.lzma: $(KDIR)/vmlinux
-	cat $^ | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $@ || (rm -f $@ && false)
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).ari: $(KDIR)/vmlinux.lzma
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).ari
-endif
-
-ifeq ($(KERNEL),2.6)
-FSNAME:=$(patsubst jffs2-%,jffs2,$(FS))
-
-ifeq ($(FS),jffs2-4MB)
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).ari: $(KDIR)/loader.elf
-	./addVersion -n ArubaOS $(KDIR)/loader.elf $@ version
-
-ifneq ($(BR2_ARUBA_RAMDISK),y)
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).ari $(KDIR)/root.$(FS)
-	@dd if=$< of=$@.tmp bs=655360 conv=sync
-	@cat $(KDIR)/root.$(FS) >> $@.tmp
-	@dd if=$@.tmp of=$@ bs=3604480 conv=sync
-	@rm -f $@.tmp
-
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FSNAME).bin
-endif
-
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).ari
-endif
-endif
-
-ifeq ($(IB),)
-clean: lzma-loader-clean
-prepare: lzma-loader-prepare
-compile: lzma-loader-compile
-else
-clean:
-prepare:
-compile:
-endif
-install-ib:
-	mkdir -p $(IB_DIR)/staging_dir_$(ARCH)/bin
-	mkdir -p $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)
-	$(CP) $(KDIR)/loader.elf $(IB_DIR)/build_$(ARCH)/
-	$(CP) $(KDIR)/vmlinux.lzma $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)/
diff --git a/openwrt/target/linux/image/aruba/addVersion b/openwrt/target/linux/image/aruba/addVersion
deleted file mode 100755
index 796f73ad1b..0000000000
--- a/openwrt/target/linux/image/aruba/addVersion
+++ /dev/null
diff --git a/openwrt/target/linux/image/aruba/version b/openwrt/target/linux/image/aruba/version
deleted file mode 100644
index fff5589e14..0000000000
--- a/openwrt/target/linux/image/aruba/version
+++ /dev/null
@@ -1 +0,0 @@
-3.0.0.0
diff --git a/openwrt/target/linux/image/au1000/Makefile b/openwrt/target/linux/image/au1000/Makefile
deleted file mode 100644
index c7158ca761..0000000000
--- a/openwrt/target/linux/image/au1000/Makefile
+++ /dev/null
@@ -1,76 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-LOADADDR = 0x8108c8f4		# RAM start + 16M 
-KERNEL_ENTRY = 0x80100000	# Default kernel entry in arch/mips/Makefile
-RAMSIZE = 0x04000000		# 64MB
-
-LOADER_MAKEOPTS= \
-		KDIR=$(KDIR) \
-		LOADADDR=$(LOADADDR) \
-		KERNEL_ENTRY=$(KERNEL_ENTRY) \
-		RAMSIZE=$(RAMSIZE)
-
-KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
-
-lzma-loader-clean:
-	$(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean
-
-lzma-loader-prepare:
-	$(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) prepare
-
-lzma-loader-compile: $(KDIR)/vmlinux.lzma lzma-loader-prepare
-	$(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) compile
-
-ifeq ($(IB),)
-$(KDIR)/vmlinux.lzma: $(KDIR)/vmlinux
-	cat $^ | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $@ || (rm -f $@ && false)
-	
-install: $(KDIR)/vmlinux.lzma
-endif
-
-ifeq ($(FS),jffs2-8MB)
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FSNAME).bin: $(KDIR)/root.$(FS)
-	$(TARGET_CROSS)objcopy -O srec -I binary --adjust-vma 0xbe000000 $(KDIR)/root.$(FS) $(KDIR)/root.srec
-	grep -v S7 $(KDIR)/root.srec > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img
-	grep -v S0 $(LINUX_DIR)/arch/mips/boot/compressed/images/zImage.flash.srec >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img
-
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FSNAME).bin
-endif
-
-ifeq ($(FS),tgz)
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz: $(KDIR)/root.tar.gz
-	$(CP) $^ $@
-
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz
-
-endif
-
-ifeq ($(FS),squashfs)
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FSNAME).bin: $(KDIR)/root.$(FS)
-	$(TARGET_CROSS)objcopy -O srec -I binary --adjust-vma 0xbe000000 $(KDIR)/root.$(FS) $(KDIR)/root.srec
-	grep -v S7 $(KDIR)/root.srec > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img
-	grep -v S0 $(LINUX_DIR)/arch/mips/boot/compressed/images/zImage.flash.srec >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img
-
-endif
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz: $(KDIR)/zImage.flash
-	$(CP) $^ $@
-
-ifeq ($(IB),)
-clean: lzma-loader-clean
-prepare: lzma-loader-prepare
-compile: lzma-loader-compile
-else
-clean:
-prepare:
-compile:
-endif
-install-ib:
-	mkdir -p $(IB_DIR)/staging_dir_$(ARCH)/bin
-	mkdir -p $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)
-	$(CP) $(KDIR)/loader.elf $(IB_DIR)/build_$(ARCH)/
-	$(CP) $(KDIR)/vmlinux.lzma $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)/
-	$(TARGET_CROSS)objcopy -O srec -I binary --adjust-vma 0xbe000000 $(KDIR)/loader.elf $(KDIR)/loader.srec
-	grep -v S0 $(KDIR)/loader.srec > $(KDIR)/kernel.srec
diff --git a/openwrt/target/linux/image/brcm/Makefile b/openwrt/target/linux/image/brcm/Makefile
deleted file mode 100644
index 0fe3ceeac7..0000000000
--- a/openwrt/target/linux/image/brcm/Makefile
+++ /dev/null
@@ -1,135 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
-
-lzma-loader-clean:
-	$(MAKE) -C lzma-loader clean
-
-lzma-loader-prepare:
-	$(MAKE) -C lzma-loader prepare
-
-lzma-loader-compile: lzma-loader-prepare
-	$(MAKE) -C lzma-loader compile
-
-ifeq ($(IB),)
-$(KDIR)/vmlinux.lzma: $(KDIR)/vmlinux
-	cat $^ | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $@ || (rm -f $@ && false)
-
-$(KDIR)/loader.tmp.gz: compile
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx: $(KDIR)/vmlinux.lzma
-endif
-
-ifeq ($(FS),jffs2-8MB)
-TRXALIGN:=-a 0x20000
-endif
-ifeq ($(FS),jffs2-4MB)
-TRXALIGN:=-a 0x10000
-endif
-# see ticket #155
-ifeq ($(FS),squashfs)
-TRXALIGN:=-a 1024
-endif
-
-
-$(KDIR)/loader.tmp.gz:
-	$(CP) $(BUILD_DIR)/loader.gz $@
-	echo -ne "\\x00" >> $@
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx: $(KDIR)/loader.tmp.gz
-	$(STAGING_DIR)/bin/trx -o $@ $(KDIR)/loader.tmp.gz $(KDIR)/vmlinux.lzma $(TRXALIGN) $(KDIR)/root.$(FS)
-
-ifeq ($(KERNEL),2.6)
-FSNAME:=$(patsubst jffs2-%,jffs2,$(FS))
-
-ifneq ($(FS),jffs2-4MB)
-$(BIN_DIR)/openwrt-wgt634u-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	dd if=$(BUILD_DIR)/loader.elf of=$@ bs=131072 conv=sync
-	cat $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx >> $@
-
-$(BIN_DIR)/openwrt-wrt54gs-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	$(STAGING_DIR)/bin/addpattern -4 -p W54S -v v4.70.6 -i $< -o $@ -g
-
-install: $(BIN_DIR)/openwrt-wgt634u-$(KERNEL)-$(FSNAME).bin $(BIN_DIR)/openwrt-wrt54gs-$(KERNEL)-$(FSNAME).bin
-
-endif
-
-ifneq ($(FS),jffs2-8MB)
-$(BIN_DIR)/openwrt-wrt54g3g-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	$(STAGING_DIR)/bin/addpattern -4 -p W54F -v v1.99.5 -i $< -o $@ -g
-	
-$(BIN_DIR)/openwrt-wrt54g-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	$(STAGING_DIR)/bin/addpattern -4 -p W54G -v v4.20.6 -i $< -o $@ -g
-
-$(BIN_DIR)/openwrt-wrt54gs_v4-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	$(STAGING_DIR)/bin/addpattern -4 -p W54s -v v1.05.2 -i $< -o $@ -g
-
-install: $(BIN_DIR)/openwrt-wrt54g-$(KERNEL)-$(FSNAME).bin $(BIN_DIR)/openwrt-wrt54gs_v4-$(KERNEL)-$(FSNAME).bin $(BIN_DIR)/openwrt-wrt54g3g-$(KERNEL)-$(FSNAME).bin
-
-endif
-endif
-
-ifeq ($(KERNEL),2.4)
-FSNAME:=$(patsubst jffs2-%,jffs2,$(FS))
-
-# ifeq ($(FS),squashfs)
-# $(BIN_DIR)/openwrt-wap54g-$(KERNEL)-$(FSNAME).trx: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-# 	$(CP) $< $@
-# 	echo -ne '\x01' >> $@
-# 	
-# install: $(BIN_DIR)/openwrt-wap54g-$(KERNEL)-$(FSNAME).trx
-# endif
-
-ifneq ($(FS),jffs2-8MB)
-$(BIN_DIR)/openwrt-wrt54g3g-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	$(STAGING_DIR)/bin/addpattern -4 -p W54F -v v1.99.5 -i $< -o $@ -g
-	
-$(BIN_DIR)/openwrt-wrt54g-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	$(STAGING_DIR)/bin/addpattern -4 -p W54G -v v4.20.6 -i $< -o $@ -g
-
-$(BIN_DIR)/openwrt-wrt54gs_v4-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	$(STAGING_DIR)/bin/addpattern -4 -p W54s -v v1.05.2 -i $< -o $@ -g
-
-$(BIN_DIR)/openwrt-wr850g-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	$(STAGING_DIR)/bin/motorola-bin -1 $< $@
-
-$(BIN_DIR)/openwrt-wa840g-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	$(STAGING_DIR)/bin/motorola-bin -2 $< $@
-
-$(BIN_DIR)/openwrt-we800g-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	$(STAGING_DIR)/bin/motorola-bin -3 $< $@
-
-install: $(BIN_DIR)/openwrt-wrt54g-$(KERNEL)-$(FSNAME).bin $(BIN_DIR)/openwrt-wrt54gs_v4-$(KERNEL)-$(FSNAME).bin $(BIN_DIR)/openwrt-wrt54g3g-$(KERNEL)-$(FSNAME).bin $(BIN_DIR)/openwrt-wr850g-$(FSNAME).bin $(BIN_DIR)/openwrt-wa840g-$(FSNAME).bin $(BIN_DIR)/openwrt-we800g-$(FSNAME).bin
-endif
-
-ifneq ($(FS),jffs2-4MB)
-$(BIN_DIR)/openwrt-wgt634u-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	dd if=$(BUILD_DIR)/loader.elf of=$@ bs=131072 conv=sync
-	cat $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx >> $@
-
-$(BIN_DIR)/openwrt-wrt54gs-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	$(STAGING_DIR)/bin/addpattern -4 -p W54S -v v4.70.6 -i $< -o $@ -g
-
-$(BIN_DIR)/openwrt-wrtsl54gs-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-	$(STAGING_DIR)/bin/addpattern -4 -p W54U -v v2.00.0 -i $< -o $@ -g
-
-install: $(BIN_DIR)/openwrt-wrt54gs-$(KERNEL)-$(FSNAME).bin $(BIN_DIR)/openwrt-wgt634u-$(KERNEL)-$(FSNAME).bin $(BIN_DIR)/openwrt-wrtsl54gs-$(FSNAME).bin
-endif
-endif
-
-ifeq ($(IB),)
-clean: lzma-loader-clean
-prepare: lzma-loader-prepare
-compile: lzma-loader-compile
-else
-clean:
-prepare:
-compile:
-endif
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
-install-ib:
-	mkdir -p $(IB_DIR)/staging_dir_$(ARCH)/bin
-	$(CP) $(STAGING_DIR)/bin/addpattern $(STAGING_DIR)/bin/trx $(STAGING_DIR)/bin/motorola-bin $(IB_DIR)/staging_dir_$(ARCH)/bin
-	mkdir -p $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)
-	$(CP) $(BUILD_DIR)/loader.gz $(IB_DIR)/build_$(ARCH)/
-	$(CP) $(BUILD_DIR)/loader.elf $(IB_DIR)/build_$(ARCH)/
-	$(CP) $(KDIR)/vmlinux.lzma $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)/
diff --git a/openwrt/target/linux/image/brcm/lzma-loader/Makefile b/openwrt/target/linux/image/brcm/lzma-loader/Makefile
deleted file mode 100644
index 1d7b6a3196..0000000000
--- a/openwrt/target/linux/image/brcm/lzma-loader/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# $Id$
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME := loader
-PKG_VERSION := 0.04
-
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-$(PKG_BUILD_DIR)/.prepared:
-	mkdir $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-	touch $@
-
-$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared
-	$(MAKE) -C $(PKG_BUILD_DIR) CC=$(TARGET_CC) \
-		LD=$(TARGET_CROSS)ld CROSS_COMPILE=$(TARGET_CROSS)
-
-$(BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/loader.gz
-	$(CP) $< $@
-
-$(BUILD_DIR)/loader.elf: $(PKG_BUILD_DIR)/loader.o
-	$(CP) $< $@
-
-source: 
-prepare: $(PKG_BUILD_DIR)/.prepared
-compile: $(BUILD_DIR)/loader.gz $(BUILD_DIR)/loader.elf
-install:
-
-clean:
-	rm -rf $(PKG_BUILD_DIR)
-	rm -f $(BUILD_DIR)/loader.gz
diff --git a/openwrt/target/linux/image/brcm/lzma-loader/src/LzmaDecode.c b/openwrt/target/linux/image/brcm/lzma-loader/src/LzmaDecode.c
deleted file mode 100644
index 951700bddf..0000000000
--- a/openwrt/target/linux/image/brcm/lzma-loader/src/LzmaDecode.c
+++ /dev/null
@@ -1,663 +0,0 @@
-/*
-  LzmaDecode.c
-  LZMA Decoder
-  
-  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
-  http://www.7-zip.org/
-
-  LZMA SDK is licensed under two licenses:
-  1) GNU Lesser General Public License (GNU LGPL)
-  2) Common Public License (CPL)
-  It means that you can select one of these two licenses and 
-  follow rules of that license.
-
-  SPECIAL EXCEPTION:
-  Igor Pavlov, as the author of this code, expressly permits you to 
-  statically or dynamically link your code (or bind by name) to the 
-  interfaces of this file without subjecting your linked code to the 
-  terms of the CPL or GNU LGPL. Any modifications or additions 
-  to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#include "LzmaDecode.h"
-
-#ifndef Byte
-#define Byte unsigned char
-#endif
-
-#define kNumTopBits 24
-#define kTopValue ((UInt32)1 << kNumTopBits)
-
-#define kNumBitModelTotalBits 11
-#define kBitModelTotal (1 << kNumBitModelTotalBits)
-#define kNumMoveBits 5
-
-typedef struct _CRangeDecoder
-{
-  Byte *Buffer;
-  Byte *BufferLim;
-  UInt32 Range;
-  UInt32 Code;
-  #ifdef _LZMA_IN_CB
-  ILzmaInCallback *InCallback;
-  int Result;
-  #endif
-  int ExtraBytes;
-} CRangeDecoder;
-
-Byte RangeDecoderReadByte(CRangeDecoder *rd)
-{
-  if (rd->Buffer == rd->BufferLim)
-  {
-    #ifdef _LZMA_IN_CB
-    UInt32 size;
-    rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
-    rd->BufferLim = rd->Buffer + size;
-    if (size == 0)
-    #endif
-    {
-      rd->ExtraBytes = 1;
-      return 0xFF;
-    }
-  }
-  return (*rd->Buffer++);
-}
-
-/* #define ReadByte (*rd->Buffer++) */
-#define ReadByte (RangeDecoderReadByte(rd))
-
-void RangeDecoderInit(CRangeDecoder *rd,
-  #ifdef _LZMA_IN_CB
-    ILzmaInCallback *inCallback
-  #else
-    Byte *stream, UInt32 bufferSize
-  #endif
-    )
-{
-  int i;
-  #ifdef _LZMA_IN_CB
-  rd->InCallback = inCallback;
-  rd->Buffer = rd->BufferLim = 0;
-  #else
-  rd->Buffer = stream;
-  rd->BufferLim = stream + bufferSize;
-  #endif
-  rd->ExtraBytes = 0;
-  rd->Code = 0;
-  rd->Range = (0xFFFFFFFF);
-  for(i = 0; i < 5; i++)
-    rd->Code = (rd->Code << 8) | ReadByte;
-}
-
-#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;        
-#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
-#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
-
-UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
-{
-  RC_INIT_VAR
-  UInt32 result = 0;
-  int i;
-  for (i = numTotalBits; i > 0; i--)
-  {
-    /* UInt32 t; */
-    range >>= 1;
-
-    result <<= 1;
-    if (code >= range)
-    {
-      code -= range;
-      result |= 1;
-    }
-    /*
-    t = (code - range) >> 31;
-    t &= 1;
-    code -= range & (t - 1);
-    result = (result + result) | (1 - t);
-    */
-    RC_NORMALIZE
-  }
-  RC_FLUSH_VAR
-  return result;
-}
-
-int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
-{
-  UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
-  if (rd->Code < bound)
-  {
-    rd->Range = bound;
-    *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
-    if (rd->Range < kTopValue)
-    {
-      rd->Code = (rd->Code << 8) | ReadByte;
-      rd->Range <<= 8;
-    }
-    return 0;
-  }
-  else
-  {
-    rd->Range -= bound;
-    rd->Code -= bound;
-    *prob -= (*prob) >> kNumMoveBits;
-    if (rd->Range < kTopValue)
-    {
-      rd->Code = (rd->Code << 8) | ReadByte;
-      rd->Range <<= 8;
-    }
-    return 1;
-  }
-}
-
-#define RC_GET_BIT2(prob, mi, A0, A1) \
-  UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
-  if (code < bound) \
-    { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
-  else \
-    { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
-  RC_NORMALIZE
-
-#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)               
-
-int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
-{
-  int mi = 1;
-  int i;
-  #ifdef _LZMA_LOC_OPT
-  RC_INIT_VAR
-  #endif
-  for(i = numLevels; i > 0; i--)
-  {
-    #ifdef _LZMA_LOC_OPT
-    CProb *prob = probs + mi;
-    RC_GET_BIT(prob, mi)
-    #else
-    mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
-    #endif
-  }
-  #ifdef _LZMA_LOC_OPT
-  RC_FLUSH_VAR
-  #endif
-  return mi - (1 << numLevels);
-}
-
-int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
-{
-  int mi = 1;
-  int i;
-  int symbol = 0;
-  #ifdef _LZMA_LOC_OPT
-  RC_INIT_VAR
-  #endif
-  for(i = 0; i < numLevels; i++)
-  {
-    #ifdef _LZMA_LOC_OPT
-    CProb *prob = probs + mi;
-    RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
-    #else
-    int bit = RangeDecoderBitDecode(probs + mi, rd);
-    mi = mi + mi + bit;
-    symbol |= (bit << i);
-    #endif
-  }
-  #ifdef _LZMA_LOC_OPT
-  RC_FLUSH_VAR
-  #endif
-  return symbol;
-}
-
-Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
-{ 
-  int symbol = 1;
-  #ifdef _LZMA_LOC_OPT
-  RC_INIT_VAR
-  #endif
-  do
-  {
-    #ifdef _LZMA_LOC_OPT
-    CProb *prob = probs + symbol;
-    RC_GET_BIT(prob, symbol)
-    #else
-    symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
-    #endif
-  }
-  while (symbol < 0x100);
-  #ifdef _LZMA_LOC_OPT
-  RC_FLUSH_VAR
-  #endif
-  return symbol;
-}
-
-Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
-{ 
-  int symbol = 1;
-  #ifdef _LZMA_LOC_OPT
-  RC_INIT_VAR
-  #endif
-  do
-  {
-    int bit;
-    int matchBit = (matchByte >> 7) & 1;
-    matchByte <<= 1;
-    #ifdef _LZMA_LOC_OPT
-    {
-      CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
-      RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
-    }
-    #else
-    bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
-    symbol = (symbol << 1) | bit;
-    #endif
-    if (matchBit != bit)
-    {
-      while (symbol < 0x100)
-      {
-        #ifdef _LZMA_LOC_OPT
-        CProb *prob = probs + symbol;
-        RC_GET_BIT(prob, symbol)
-        #else
-        symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
-        #endif
-      }
-      break;
-    }
-  }
-  while (symbol < 0x100);
-  #ifdef _LZMA_LOC_OPT
-  RC_FLUSH_VAR
-  #endif
-  return symbol;
-}
-
-#define kNumPosBitsMax 4
-#define kNumPosStatesMax (1 << kNumPosBitsMax)
-
-#define kLenNumLowBits 3
-#define kLenNumLowSymbols (1 << kLenNumLowBits)
-#define kLenNumMidBits 3
-#define kLenNumMidSymbols (1 << kLenNumMidBits)
-#define kLenNumHighBits 8
-#define kLenNumHighSymbols (1 << kLenNumHighBits)
-
-#define LenChoice 0
-#define LenChoice2 (LenChoice + 1)
-#define LenLow (LenChoice2 + 1)
-#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
-
-int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
-{
-  if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
-    return RangeDecoderBitTreeDecode(p + LenLow +
-        (posState << kLenNumLowBits), kLenNumLowBits, rd);
-  if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
-    return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
-        (posState << kLenNumMidBits), kLenNumMidBits, rd);
-  return kLenNumLowSymbols + kLenNumMidSymbols + 
-      RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
-}
-
-#define kNumStates 12
-
-#define kStartPosModelIndex 4
-#define kEndPosModelIndex 14
-#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-
-#define kNumPosSlotBits 6
-#define kNumLenToPosStates 4
-
-#define kNumAlignBits 4
-#define kAlignTableSize (1 << kNumAlignBits)
-
-#define kMatchMinLen 2
-
-#define IsMatch 0
-#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-#define IsRepG0 (IsRep + kNumStates)
-#define IsRepG1 (IsRepG0 + kNumStates)
-#define IsRepG2 (IsRepG1 + kNumStates)
-#define IsRep0Long (IsRepG2 + kNumStates)
-#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-#define LenCoder (Align + kAlignTableSize)
-#define RepLenCoder (LenCoder + kNumLenProbs)
-#define Literal (RepLenCoder + kNumLenProbs)
-
-#if Literal != LZMA_BASE_SIZE
-StopCompilingDueBUG
-#endif
-
-#ifdef _LZMA_OUT_READ
-
-typedef struct _LzmaVarState
-{
-  CRangeDecoder RangeDecoder;
-  Byte *Dictionary;
-  UInt32 DictionarySize;
-  UInt32 DictionaryPos;
-  UInt32 GlobalPos;
-  UInt32 Reps[4];
-  int lc;
-  int lp;
-  int pb;
-  int State;
-  int PreviousIsMatch;
-  int RemainLen;
-} LzmaVarState;
-
-int LzmaDecoderInit(
-    unsigned char *buffer, UInt32 bufferSize,
-    int lc, int lp, int pb,
-    unsigned char *dictionary, UInt32 dictionarySize,
-    #ifdef _LZMA_IN_CB
-    ILzmaInCallback *inCallback
-    #else
-    unsigned char *inStream, UInt32 inSize
-    #endif
-    )
-{
-  LzmaVarState *vs = (LzmaVarState *)buffer;
-  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
-  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
-  UInt32 i;
-  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
-    return LZMA_RESULT_NOT_ENOUGH_MEM;
-  vs->Dictionary = dictionary;
-  vs->DictionarySize = dictionarySize;
-  vs->DictionaryPos = 0;
-  vs->GlobalPos = 0;
-  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
-  vs->lc = lc;
-  vs->lp = lp;
-  vs->pb = pb;
-  vs->State = 0;
-  vs->PreviousIsMatch = 0;
-  vs->RemainLen = 0;
-  dictionary[dictionarySize - 1] = 0;
-  for (i = 0; i < numProbs; i++)
-    p[i] = kBitModelTotal >> 1; 
-  RangeDecoderInit(&vs->RangeDecoder, 
-      #ifdef _LZMA_IN_CB
-      inCallback
-      #else
-      inStream, inSize
-      #endif
-  );
-  return LZMA_RESULT_OK;
-}
-
-int LzmaDecode(unsigned char *buffer, 
-    unsigned char *outStream, UInt32 outSize,
-    UInt32 *outSizeProcessed)
-{
-  LzmaVarState *vs = (LzmaVarState *)buffer;
-  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
-  CRangeDecoder rd = vs->RangeDecoder;
-  int state = vs->State;
-  int previousIsMatch = vs->PreviousIsMatch;
-  Byte previousByte;
-  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
-  UInt32 nowPos = 0;
-  UInt32 posStateMask = (1 << (vs->pb)) - 1;
-  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
-  int lc = vs->lc;
-  int len = vs->RemainLen;
-  UInt32 globalPos = vs->GlobalPos;
-
-  Byte *dictionary = vs->Dictionary;
-  UInt32 dictionarySize = vs->DictionarySize;
-  UInt32 dictionaryPos = vs->DictionaryPos;
-
-  if (len == -1)
-  {
-    *outSizeProcessed = 0;
-    return LZMA_RESULT_OK;
-  }
-
-  while(len > 0 && nowPos < outSize)
-  {
-    UInt32 pos = dictionaryPos - rep0;
-    if (pos >= dictionarySize)
-      pos += dictionarySize;
-    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
-    if (++dictionaryPos == dictionarySize)
-      dictionaryPos = 0;
-    len--;
-  }
-  if (dictionaryPos == 0)
-    previousByte = dictionary[dictionarySize - 1];
-  else
-    previousByte = dictionary[dictionaryPos - 1];
-#else
-
-int LzmaDecode(
-    Byte *buffer, UInt32 bufferSize,
-    int lc, int lp, int pb,
-    #ifdef _LZMA_IN_CB
-    ILzmaInCallback *inCallback,
-    #else
-    unsigned char *inStream, UInt32 inSize,
-    #endif
-    unsigned char *outStream, UInt32 outSize,
-    UInt32 *outSizeProcessed)
-{
-  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
-  CProb *p = (CProb *)buffer;
-  CRangeDecoder rd;
-  UInt32 i;
-  int state = 0;
-  int previousIsMatch = 0;
-  Byte previousByte = 0;
-  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
-  UInt32 nowPos = 0;
-  UInt32 posStateMask = (1 << pb) - 1;
-  UInt32 literalPosMask = (1 << lp) - 1;
-  int len = 0;
-  if (bufferSize < numProbs * sizeof(CProb))
-    return LZMA_RESULT_NOT_ENOUGH_MEM;
-  for (i = 0; i < numProbs; i++)
-    p[i] = kBitModelTotal >> 1; 
-  RangeDecoderInit(&rd, 
-      #ifdef _LZMA_IN_CB
-      inCallback
-      #else
-      inStream, inSize
-      #endif
-      );
-#endif
-
-  *outSizeProcessed = 0;
-  while(nowPos < outSize)
-  {
-    int posState = (int)(
-        (nowPos 
-        #ifdef _LZMA_OUT_READ
-        + globalPos
-        #endif
-        )
-        & posStateMask);
-    #ifdef _LZMA_IN_CB
-    if (rd.Result != LZMA_RESULT_OK)
-      return rd.Result;
-    #endif
-    if (rd.ExtraBytes != 0)
-      return LZMA_RESULT_DATA_ERROR;
-    if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
-    {
-      CProb *probs = p + Literal + (LZMA_LIT_SIZE * 
-        (((
-        (nowPos 
-        #ifdef _LZMA_OUT_READ
-        + globalPos
-        #endif
-        )
-        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-
-      if (state < 4) state = 0;
-      else if (state < 10) state -= 3;
-      else state -= 6;
-      if (previousIsMatch)
-      {
-        Byte matchByte;
-        #ifdef _LZMA_OUT_READ
-        UInt32 pos = dictionaryPos - rep0;
-        if (pos >= dictionarySize)
-          pos += dictionarySize;
-        matchByte = dictionary[pos];
-        #else
-        matchByte = outStream[nowPos - rep0];
-        #endif
-        previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
-        previousIsMatch = 0;
-      }
-      else
-        previousByte = LzmaLiteralDecode(probs, &rd);
-      outStream[nowPos++] = previousByte;
-      #ifdef _LZMA_OUT_READ
-      dictionary[dictionaryPos] = previousByte;
-      if (++dictionaryPos == dictionarySize)
-        dictionaryPos = 0;
-      #endif
-    }
-    else             
-    {
-      previousIsMatch = 1;
-      if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
-      {
-        if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
-        {
-          if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
-          {
-            #ifdef _LZMA_OUT_READ
-            UInt32 pos;
-            #endif
-            if (
-               (nowPos 
-                #ifdef _LZMA_OUT_READ
-                + globalPos
-                #endif
-               )
-               == 0)
-              return LZMA_RESULT_DATA_ERROR;
-            state = state < 7 ? 9 : 11;
-            #ifdef _LZMA_OUT_READ
-            pos = dictionaryPos - rep0;
-            if (pos >= dictionarySize)
-              pos += dictionarySize;
-            previousByte = dictionary[pos];
-            dictionary[dictionaryPos] = previousByte;
-            if (++dictionaryPos == dictionarySize)
-              dictionaryPos = 0;
-            #else
-            previousByte = outStream[nowPos - rep0];
-            #endif
-            outStream[nowPos++] = previousByte;
-            continue;
-          }
-        }
-        else
-        {
-          UInt32 distance;
-          if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
-            distance = rep1;
-          else 
-          {
-            if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
-              distance = rep2;
-            else
-            {
-              distance = rep3;
-              rep3 = rep2;
-            }
-            rep2 = rep1;
-          }
-          rep1 = rep0;
-          rep0 = distance;
-        }
-        len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
-        state = state < 7 ? 8 : 11;
-      }
-      else
-      {
-        int posSlot;
-        rep3 = rep2;
-        rep2 = rep1;
-        rep1 = rep0;
-        state = state < 7 ? 7 : 10;
-        len = LzmaLenDecode(p + LenCoder, &rd, posState);
-        posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
-            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
-            kNumPosSlotBits), kNumPosSlotBits, &rd);
-        if (posSlot >= kStartPosModelIndex)
-        {
-          int numDirectBits = ((posSlot >> 1) - 1);
-          rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
-          if (posSlot < kEndPosModelIndex)
-          {
-            rep0 += RangeDecoderReverseBitTreeDecode(
-                p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
-          }
-          else
-          {
-            rep0 += RangeDecoderDecodeDirectBits(&rd, 
-                numDirectBits - kNumAlignBits) << kNumAlignBits;
-            rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
-          }
-        }
-        else
-          rep0 = posSlot;
-        rep0++;
-      }
-      if (rep0 == (UInt32)(0))
-      {
-        /* it's for stream version */
-        len = -1;
-        break;
-      }
-      if (rep0 > nowPos 
-        #ifdef _LZMA_OUT_READ
-        + globalPos
-        #endif
-        )
-      {
-        return LZMA_RESULT_DATA_ERROR;
-      }
-      len += kMatchMinLen;
-      do
-      {
-        #ifdef _LZMA_OUT_READ
-        UInt32 pos = dictionaryPos - rep0;
-        if (pos >= dictionarySize)
-          pos += dictionarySize;
-        previousByte = dictionary[pos];
-        dictionary[dictionaryPos] = previousByte;
-        if (++dictionaryPos == dictionarySize)
-          dictionaryPos = 0;
-        #else
-        previousByte = outStream[nowPos - rep0];
-        #endif
-        outStream[nowPos++] = previousByte;
-        len--;
-      }
-      while(len > 0 && nowPos < outSize);
-    }
-  }
-
-  #ifdef _LZMA_OUT_READ
-  vs->RangeDecoder = rd;
-  vs->DictionaryPos = dictionaryPos;
-  vs->GlobalPos = globalPos + nowPos;
-  vs->Reps[0] = rep0;
-  vs->Reps[1] = rep1;
-  vs->Reps[2] = rep2;
-  vs->Reps[3] = rep3;
-  vs->State = state;
-  vs->PreviousIsMatch = previousIsMatch;
-  vs->RemainLen = len;
-  #endif
-
-  *outSizeProcessed = nowPos;
-  return LZMA_RESULT_OK;
-}
diff --git a/openwrt/target/linux/image/brcm/lzma-loader/src/LzmaDecode.h b/openwrt/target/linux/image/brcm/lzma-loader/src/LzmaDecode.h
deleted file mode 100644
index f58944e3c3..0000000000
--- a/openwrt/target/linux/image/brcm/lzma-loader/src/LzmaDecode.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* 
-  LzmaDecode.h
-  LZMA Decoder interface
-
-  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
-  http://www.7-zip.org/
-
-  LZMA SDK is licensed under two licenses:
-  1) GNU Lesser General Public License (GNU LGPL)
-  2) Common Public License (CPL)
-  It means that you can select one of these two licenses and 
-  follow rules of that license.
-
-  SPECIAL EXCEPTION:
-  Igor Pavlov, as the author of this code, expressly permits you to 
-  statically or dynamically link your code (or bind by name) to the 
-  interfaces of this file without subjecting your linked code to the 
-  terms of the CPL or GNU LGPL. Any modifications or additions 
-  to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#ifndef __LZMADECODE_H
-#define __LZMADECODE_H
-
-/* #define _LZMA_IN_CB */
-/* Use callback for input data */
-
-/* #define _LZMA_OUT_READ */
-/* Use read function for output data */
-
-/* #define _LZMA_PROB32 */
-/* It can increase speed on some 32-bit CPUs, 
-   but memory usage will be doubled in that case */
-
-/* #define _LZMA_LOC_OPT */
-/* Enable local speed optimizations inside code */
-
-#ifndef UInt32
-#ifdef _LZMA_UINT32_IS_ULONG
-#define UInt32 unsigned long
-#else
-#define UInt32 unsigned int
-#endif
-#endif
-
-#ifdef _LZMA_PROB32
-#define CProb UInt32
-#else
-#define CProb unsigned short
-#endif
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-#define LZMA_RESULT_NOT_ENOUGH_MEM 2
-
-#ifdef _LZMA_IN_CB
-typedef struct _ILzmaInCallback
-{
-  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
-} ILzmaInCallback;
-#endif
-
-#define LZMA_BASE_SIZE 1846
-#define LZMA_LIT_SIZE 768
-
-/* 
-bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
-bufferSize += 100 in case of _LZMA_OUT_READ
-by default CProb is unsigned short, 
-but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
-*/
-
-#ifdef _LZMA_OUT_READ
-int LzmaDecoderInit(
-    unsigned char *buffer, UInt32 bufferSize,
-    int lc, int lp, int pb,
-    unsigned char *dictionary, UInt32 dictionarySize,
-  #ifdef _LZMA_IN_CB
-    ILzmaInCallback *inCallback
-  #else
-    unsigned char *inStream, UInt32 inSize
-  #endif
-);
-#endif
-
-int LzmaDecode(
-    unsigned char *buffer, 
-  #ifndef _LZMA_OUT_READ
-    UInt32 bufferSize,
-    int lc, int lp, int pb,
-  #ifdef _LZMA_IN_CB
-    ILzmaInCallback *inCallback,
-  #else
-    unsigned char *inStream, UInt32 inSize,
-  #endif
-  #endif
-    unsigned char *outStream, UInt32 outSize,
-    UInt32 *outSizeProcessed);
-
-#endif
diff --git a/openwrt/target/linux/image/brcm/lzma-loader/src/Makefile b/openwrt/target/linux/image/brcm/lzma-loader/src/Makefile
deleted file mode 100644
index 92916d8cb3..0000000000
--- a/openwrt/target/linux/image/brcm/lzma-loader/src/Makefile
+++ /dev/null
@@ -1,74 +0,0 @@
-#
-# Makefile for Broadcom BCM947XX boards
-#
-# Copyright 2001-2003, Broadcom Corporation
-# All Rights Reserved.
-# 
-# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-#
-# Copyright 2004  Manuel Novoa III <mjn3@codepoet.org>
-#   Modified to support bzip'd kernels.
-#   Of course, it would be better to integrate bunzip capability into CFE.
-#
-# Copyright 2005  Oleg I. Vdovikin <oleg@cs.msu.su>
-#   Cleaned up, modified for lzma support, removed from kernel
-#
-
-TEXT_START	:= 0x80001000
-BZ_TEXT_START	:= 0x80300000
-
-OBJCOPY		:= $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
-
-CFLAGS		= -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
-		  -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
-		  -ffunction-sections -pipe -mlong-calls -fno-common \
-		  -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
-CFLAGS		+= -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB
-
-ASFLAGS		= $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START)
-
-SEDFLAGS	:= s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/
-
-OBJECTS		:= head.o data.o
-
-all: loader.gz
-
-# Don't build dependencies, this may die if $(CC) isn't gcc
-dep:
-
-install:
-
-loader.gz: loader
-	gzip -nc9 $< > $@
-
-loader: loader.o
-	$(OBJCOPY) $< $@
-
-loader.o: loader.lds $(OBJECTS)
-	$(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS)
-
-loader.lds: loader.lds.in Makefile
-	@sed "$(SEDFLAGS)" < $< > $@
-
-data.o: data.lds decompress.image
-	$(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips
-
-data.lds:
-	@echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@
-
-decompress.image: decompress
-	$(OBJCOPY) $< $@
-
-decompress: decompress.lds decompress.o LzmaDecode.o
-	$(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o
-
-decompress.lds: decompress.lds.in Makefile
-	@sed "$(SEDFLAGS)" < $< > $@
-
-mrproper: clean
-
-clean:
-	rm -f loader.gz loader decompress *.lds *.o *.image
diff --git a/openwrt/target/linux/image/brcm/lzma-loader/src/README b/openwrt/target/linux/image/brcm/lzma-loader/src/README
deleted file mode 100644
index 16649e9500..0000000000
--- a/openwrt/target/linux/image/brcm/lzma-loader/src/README
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * LZMA compressed kernel decompressor for bcm947xx boards
- *
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-The code is intended to decompress kernel, being compressed using lzma utility
-build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
-
-decompressor code expects that your .trx file consist of three partitions: 
-
-1) decompressor itself (this is gziped code which pmon/cfe will extract and run
-on boot-up instead of real kernel)
-2) LZMA compressed kernel (both streamed and regular modes are supported now)
-3) Root filesystem
-
-Please be sure to apply the following patch for use this new trx layout (it will
-allow using both new and old trx files for root filesystem lookup code)
-
---- linuz/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:24:27.503322896 +0300
-+++ linux/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:29:05.237100944 +0300
-@@ -221,7 +221,9 @@
-                /* Try looking at TRX header for rootfs offset */
-                if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
-                        bcm947xx_parts[1].offset = off;
--                       if (le32_to_cpu(trx->offsets[1]) > off)
-+                       if (le32_to_cpu(trx->offsets[2]) > off)
-+                               off = le32_to_cpu(trx->offsets[2]);
-+                       else if (le32_to_cpu(trx->offsets[1]) > off)
-                                off = le32_to_cpu(trx->offsets[1]);
-                        continue;
-                }
-
-
-Revision history:
-	0.02	Initial release
-	0.03	Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
-		output size to decoder (stream mode compressed input is not 
-		a requirement anymore)
-	0.04	Reordered functions using lds script
diff --git a/openwrt/target/linux/image/brcm/lzma-loader/src/decompress.c b/openwrt/target/linux/image/brcm/lzma-loader/src/decompress.c
deleted file mode 100644
index ec510e21e3..0000000000
--- a/openwrt/target/linux/image/brcm/lzma-loader/src/decompress.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * LZMA compressed kernel decompressor for bcm947xx boards
- *
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- *
- * Please note, this was code based on the bunzip2 decompressor code
- * by Manuel Novoa III  (mjn3@codepoet.org), although the only thing left
- * is an idea and part of original vendor code
- *
- *
- * 12-Mar-2005  Mineharu Takahara <mtakahar@yahoo.com>
- *   pass actual output size to decoder (stream mode
- *   compressed input is not a requirement anymore)
- *
- * 24-Apr-2005 Oleg I. Vdovikin
- *   reordered functions using lds script, removed forward decl
- *
- */
-
-#include "LzmaDecode.h"
-
-#define BCM4710_FLASH		0x1fc00000	/* Flash */
-
-#define KSEG0			0x80000000
-#define KSEG1			0xa0000000
-
-#define KSEG1ADDR(a)		((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
-
-#define Index_Invalidate_I	0x00
-#define Index_Writeback_Inv_D   0x01
-
-#define cache_unroll(base,op)	\
-	__asm__ __volatile__(		\
-		".set noreorder;\n"		\
-		".set mips3;\n"			\
-		"cache %1, (%0);\n"		\
-		".set mips0;\n"			\
-		".set reorder\n"		\
-		:						\
-		: "r" (base),			\
-		  "i" (op));
-
-static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
-{
-	unsigned long start = KSEG0;
-	unsigned long end = (start + size);
-
-	while(start < end) {
-		cache_unroll(start,Index_Invalidate_I);
-		start += lsize;
-	}
-}
-
-static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
-{
-	unsigned long start = KSEG0;
-	unsigned long end = (start + size);
-
-	while(start < end) {
-		cache_unroll(start,Index_Writeback_Inv_D);
-		start += lsize;
-	}
-}
-
-#define TRX_MAGIC       0x30524448      /* "HDR0" */
-
-struct trx_header {
-	unsigned int magic;		/* "HDR0" */
-	unsigned int len;		/* Length of file including header */
-	unsigned int crc32;		/* 32-bit CRC from flag_version to end of file */
-	unsigned int flag_version;	/* 0:15 flags, 16:31 version */
-	unsigned int offsets[3];	/* Offsets of partitions from start of header */
-};
-
-/* beyound the image end, size not known in advance */
-extern unsigned char workspace[];
-
-unsigned int offset;
-unsigned char *data;
-
-/* flash access should be aligned, so wrapper is used */
-/* read byte from the flash, all accesses are 32-bit aligned */
-static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
-{
-	static unsigned int val;
-
-	if (((unsigned int)offset % 4) == 0) {
-		val = *(unsigned int *)data;
-		data += 4;
-	}
-	
-	*bufferSize = 1;
-	*buffer = ((unsigned char *)&val) + (offset++ & 3);
-	
-	return LZMA_RESULT_OK;
-}
-
-static __inline__ unsigned char get_byte(void)
-{
-	unsigned char *buffer;
-	UInt32 fake;
-	
-	return read_byte(0, &buffer, &fake), *buffer;
-}
-
-/* should be the first function */
-void entry(unsigned long icache_size, unsigned long icache_lsize, 
-	unsigned long dcache_size, unsigned long dcache_lsize)
-{
-	unsigned int i;  /* temp value */
-	unsigned int lc; /* literal context bits */
-	unsigned int lp; /* literal pos state bits */
-	unsigned int pb; /* pos state bits */
-	unsigned int osize; /* uncompressed size */
-
-	ILzmaInCallback callback;
-	callback.Read = read_byte;
-
-	/* look for trx header, 32-bit data access */
-	for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH));
-		((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536);
-
-	/* compressed kernel is in the partition 0 or 1 */
-	if (((struct trx_header *)data)->offsets[1] > 65536) 
-		data += ((struct trx_header *)data)->offsets[0];
-	else
-		data += ((struct trx_header *)data)->offsets[1];
-
-	offset = 0;
-
-	/* lzma args */
-	i = get_byte();
-	lc = i % 9, i = i / 9;
-	lp = i % 5, pb = i / 5;
-
-	/* skip rest of the LZMA coder property */
-	for (i = 0; i < 4; i++)
-		get_byte();
-
-	/* read the lower half of uncompressed size in the header */
-	osize = ((unsigned int)get_byte()) +
-		((unsigned int)get_byte() << 8) +
-		((unsigned int)get_byte() << 16) +
-		((unsigned int)get_byte() << 24);
-
-	/* skip rest of the header (upper half of uncompressed size) */
-	for (i = 0; i < 4; i++) 
-		get_byte();
-
-	/* decompress kernel */
-	if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback,
-		(unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK)
-	{
-		blast_dcache(dcache_size, dcache_lsize);
-		blast_icache(icache_size, icache_lsize);
-
-		/* Jump to load address */
-		((void (*)(void)) LOADADDR)();
-	}
-}
diff --git a/openwrt/target/linux/image/brcm/lzma-loader/src/decompress.lds.in b/openwrt/target/linux/image/brcm/lzma-loader/src/decompress.lds.in
deleted file mode 100644
index 33f56f8a09..0000000000
--- a/openwrt/target/linux/image/brcm/lzma-loader/src/decompress.lds.in
+++ /dev/null
@@ -1,20 +0,0 @@
-OUTPUT_ARCH(mips)
-ENTRY(entry)
-SECTIONS {
-	. = BZ_TEXT_START;
-	.text : {
-		*(.text.entry)
-		*(.text)
-		*(.rodata)
-	}
-
-	.data : {
-		*(.data)
-	}
-
-	.bss : {
-		*(.bss)
-	}
-
-	workspace = .;
-}
diff --git a/openwrt/target/linux/image/brcm/lzma-loader/src/head.S b/openwrt/target/linux/image/brcm/lzma-loader/src/head.S
deleted file mode 100644
index 9bfbd53d51..0000000000
--- a/openwrt/target/linux/image/brcm/lzma-loader/src/head.S
+++ /dev/null
@@ -1,155 +0,0 @@
-/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su)	*/
-/* cache manipulation adapted from Broadcom code 	*/
-/* idea taken from original bunzip2 decompressor code	*/
-/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org)	*/
-/* Licensed under the linux kernel's version of the GPL.*/
-
-#include <asm/asm.h>
-#include <asm/regdef.h>
-
-#define KSEG0		0x80000000
-
-#define C0_CONFIG	$16
-#define C0_TAGLO	$28
-#define C0_TAGHI	$29
-
-#define	CONF1_DA_SHIFT	7			/* D$ associativity */
-#define CONF1_DA_MASK	0x00000380
-#define CONF1_DA_BASE	1
-#define CONF1_DL_SHIFT	10			/* D$ line size */
-#define CONF1_DL_MASK	0x00001c00
-#define CONF1_DL_BASE	2
-#define CONF1_DS_SHIFT	13			/* D$ sets/way */
-#define CONF1_DS_MASK	0x0000e000
-#define CONF1_DS_BASE	64
-#define CONF1_IA_SHIFT	16			/* I$ associativity */
-#define CONF1_IA_MASK	0x00070000
-#define CONF1_IA_BASE	1
-#define CONF1_IL_SHIFT	19			/* I$ line size */
-#define CONF1_IL_MASK	0x00380000
-#define CONF1_IL_BASE	2
-#define CONF1_IS_SHIFT	22			/* Instruction cache sets/way */
-#define CONF1_IS_MASK	0x01c00000
-#define CONF1_IS_BASE	64
-
-#define Index_Invalidate_I	0x00
-#define Index_Writeback_Inv_D   0x01
-
-	.text
-	LEAF(startup)
-	.set noreorder
-	
-	/* Copy decompressor code to the right place */
-	li	t2, BZ_TEXT_START
-	add	a0, t2, 0
-	la      a1, code_start
-	la	a2, code_stop
-$L1:
-	lw	t0, 0(a1)
-	sw	t0, 0(a0)
-	add	a1, 4
-	add	a0, 4
-	blt	a1, a2, $L1
-	nop
-	
-	/* At this point we need to invalidate dcache and */
-	/* icache before jumping to new code */
-
-1:	/* Get cache sizes */
-	.set	mips32
-	mfc0	s0,C0_CONFIG,1
-	.set	mips0
-
-	li	s1,CONF1_DL_MASK
-	and	s1,s0
-	beq	s1,zero,nodc
-	nop
-
-	srl	s1,CONF1_DL_SHIFT
-	li	t0,CONF1_DL_BASE
-	sll	s1,t0,s1		/* s1 has D$ cache line size */
-
-	li	s2,CONF1_DA_MASK
-	and	s2,s0
-	srl	s2,CONF1_DA_SHIFT
-	addiu	s2,CONF1_DA_BASE	/* s2 now has D$ associativity */
-
-	li	t0,CONF1_DS_MASK
-	and	t0,s0
-	srl	t0,CONF1_DS_SHIFT
-	li	s3,CONF1_DS_BASE
-	sll	s3,s3,t0		/* s3 has D$ sets per way */
-
-	multu	s2,s3			/* sets/way * associativity */
-	mflo	t0			/* total cache lines */
-
-	multu	s1,t0			/* D$ linesize * lines */
-	mflo	s2			/* s2 is now D$ size in bytes */
-
-	/* Initilize the D$: */
-	mtc0	zero,C0_TAGLO
-	mtc0	zero,C0_TAGHI
-
-	li	t0,KSEG0		/* Just an address for the first $ line */
-	addu	t1,t0,s2		/*  + size of cache == end */
-
-	.set	mips3
-1:	cache	Index_Writeback_Inv_D,0(t0)
-	.set	mips0
-	bne	t0,t1,1b
-	addu	t0,s1
-	
-nodc:
-	/* Now we get to do it all again for the I$ */
-	
-	move	s3,zero			/* just in case there is no icache */
-	move	s4,zero
-
-	li	t0,CONF1_IL_MASK
-	and	t0,s0
-	beq	t0,zero,noic
-	nop
-
-	srl	t0,CONF1_IL_SHIFT
-	li	s3,CONF1_IL_BASE
-	sll	s3,t0			/* s3 has I$ cache line size */
-
-	li	t0,CONF1_IA_MASK
-	and	t0,s0
-	srl	t0,CONF1_IA_SHIFT
-	addiu	s4,t0,CONF1_IA_BASE	/* s4 now has I$ associativity */
-
-	li	t0,CONF1_IS_MASK
-	and	t0,s0
-	srl	t0,CONF1_IS_SHIFT
-	li	s5,CONF1_IS_BASE
-	sll	s5,t0			/* s5 has I$ sets per way */
-
-	multu	s4,s5			/* sets/way * associativity */
-	mflo	t0			/* s4 is now total cache lines */
-
-	multu	s3,t0			/* I$ linesize * lines */
-	mflo	s4			/* s4 is cache size in bytes */
-
-	/* Initilize the I$: */
-	mtc0	zero,C0_TAGLO
-	mtc0	zero,C0_TAGHI
-
-	li	t0,KSEG0		/* Just an address for the first $ line */
-	addu	t1,t0,s4		/*  + size of cache == end */
-
-	.set	mips3
-1:	cache	Index_Invalidate_I,0(t0)
-	.set	mips0
-	bne	t0,t1,1b
-	addu	t0,s3
-
-noic:
-	move	a0,s3			/* icache line size */
-	move	a1,s4			/* icache size */
-	move	a2,s1			/* dcache line size */
-	jal	t2
-	move	a3,s2			/* dcache size */
-	
-	.set reorder
-	END(startup)
diff --git a/openwrt/target/linux/image/brcm/lzma-loader/src/loader.lds.in b/openwrt/target/linux/image/brcm/lzma-loader/src/loader.lds.in
deleted file mode 100644
index 20f2ea98ec..0000000000
--- a/openwrt/target/linux/image/brcm/lzma-loader/src/loader.lds.in
+++ /dev/null
@@ -1,17 +0,0 @@
-OUTPUT_ARCH(mips)
-ENTRY(startup)
-SECTIONS {
-	. = TEXT_START;
-	.text : {
-		*(.text)
-		*(.rodata)
-	}
-
-	.data : {
-		*(.data)
-	}
-
-	.bss : {
-		*(.bss)
-	}
-}
diff --git a/openwrt/target/linux/image/generic/lzma-loader/Makefile b/openwrt/target/linux/image/generic/lzma-loader/Makefile
deleted file mode 100644
index 089254bbaf..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-# $Id: Makefile 1823 2005-09-01 20:07:42Z nbd $
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME := loader
-PKG_VERSION := 0.05
-
-PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-$(PKG_BUILD_DIR)/.prepared:
-	mkdir $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-	touch $@
-
-$(PKG_BUILD_DIR)/lzma.elf: $(PKG_BUILD_DIR)/.prepared $(PKG_BUILD_DIR)/vmlinux.lzma
-	$(MAKE) -C $(PKG_BUILD_DIR) CC=$(TARGET_CC) \
-		LD=$(TARGET_CROSS)ld CROSS_COMPILE=$(TARGET_CROSS) \
-		RAMSIZE=$(RAMSIZE) \
-		LOADADDR=$(LOADADDR) \
-		KERNEL_ENTRY=$(KERNEL_ENTRY)
-
-
-$(PKG_BUILD_DIR)/vmlinux.lzma: $(KDIR)/vmlinux.lzma
-	$(CP) $< $@
-
-$(KDIR)/loader.elf: $(PKG_BUILD_DIR)/lzma.elf
-	$(CP) $< $@
-
-source: 
-prepare: $(PKG_BUILD_DIR)/.prepared
-compile: $(KDIR)/loader.elf
-install:
-
-clean:
-	rm -rf $(PKG_BUILD_DIR)
-	rm -f $(KDIR)/loader.elf
diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/LzmaDecode.c b/openwrt/target/linux/image/generic/lzma-loader/src/LzmaDecode.c
deleted file mode 100644
index c90a0d3ef4..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/src/LzmaDecode.c
+++ /dev/null
@@ -1,590 +0,0 @@
-/*
-  LzmaDecode.c
-  LZMA Decoder (optimized for Speed version)
-  
-  LZMA SDK 4.22 Copyright (c) 1999-2005 Igor Pavlov (2005-06-10)
-  http://www.7-zip.org/
-
-  LZMA SDK is licensed under two licenses:
-  1) GNU Lesser General Public License (GNU LGPL)
-  2) Common Public License (CPL)
-  It means that you can select one of these two licenses and 
-  follow rules of that license.
-
-  SPECIAL EXCEPTION:
-  Igor Pavlov, as the author of this Code, expressly permits you to 
-  statically or dynamically link your Code (or bind by name) to the 
-  interfaces of this file without subjecting your linked Code to the 
-  terms of the CPL or GNU LGPL. Any modifications or additions 
-  to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#include "LzmaDecode.h"
-
-#ifndef Byte
-#define Byte unsigned char
-#endif
-
-#define kNumTopBits 24
-#define kTopValue ((UInt32)1 << kNumTopBits)
-
-#define kNumBitModelTotalBits 11
-#define kBitModelTotal (1 << kNumBitModelTotalBits)
-#define kNumMoveBits 5
-
-#define RC_READ_BYTE (*Buffer++)
-
-#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
-  { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
-
-#ifdef _LZMA_IN_CB
-
-#define RC_TEST { if (Buffer == BufferLim) \
-  { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
-  BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
-
-#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
-
-#else
-
-#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
-
-#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
- 
-#endif
-
-#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
-
-#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
-#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
-#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
-
-#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
-  { UpdateBit0(p); mi <<= 1; A0; } else \
-  { UpdateBit1(p); mi = (mi + mi) + 1; A1; } 
-  
-#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)               
-
-#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
-  { int i = numLevels; res = 1; \
-  do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
-  res -= (1 << numLevels); }
-
-
-#define kNumPosBitsMax 4
-#define kNumPosStatesMax (1 << kNumPosBitsMax)
-
-#define kLenNumLowBits 3
-#define kLenNumLowSymbols (1 << kLenNumLowBits)
-#define kLenNumMidBits 3
-#define kLenNumMidSymbols (1 << kLenNumMidBits)
-#define kLenNumHighBits 8
-#define kLenNumHighSymbols (1 << kLenNumHighBits)
-
-#define LenChoice 0
-#define LenChoice2 (LenChoice + 1)
-#define LenLow (LenChoice2 + 1)
-#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
-
-
-#define kNumStates 12
-#define kNumLitStates 7
-
-#define kStartPosModelIndex 4
-#define kEndPosModelIndex 14
-#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-
-#define kNumPosSlotBits 6
-#define kNumLenToPosStates 4
-
-#define kNumAlignBits 4
-#define kAlignTableSize (1 << kNumAlignBits)
-
-#define kMatchMinLen 2
-
-#define IsMatch 0
-#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-#define IsRepG0 (IsRep + kNumStates)
-#define IsRepG1 (IsRepG0 + kNumStates)
-#define IsRepG2 (IsRepG1 + kNumStates)
-#define IsRep0Long (IsRepG2 + kNumStates)
-#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-#define LenCoder (Align + kAlignTableSize)
-#define RepLenCoder (LenCoder + kNumLenProbs)
-#define Literal (RepLenCoder + kNumLenProbs)
-
-#if Literal != LZMA_BASE_SIZE
-StopCompilingDueBUG
-#endif
-
-#if 0
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
-{
-  unsigned char prop0;
-  if (size < LZMA_PROPERTIES_SIZE)
-    return LZMA_RESULT_DATA_ERROR;
-  prop0 = propsData[0];
-  if (prop0 >= (9 * 5 * 5))
-    return LZMA_RESULT_DATA_ERROR;
-  {
-    for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
-    for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
-    propsRes->lc = prop0;
-    /*
-    unsigned char remainder = (unsigned char)(prop0 / 9);
-    propsRes->lc = prop0 % 9;
-    propsRes->pb = remainder / 5;
-    propsRes->lp = remainder % 5;
-    */
-  }
-
-  #ifdef _LZMA_OUT_READ
-  {
-    int i;
-    propsRes->DictionarySize = 0;
-    for (i = 0; i < 4; i++)
-      propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
-    if (propsRes->DictionarySize == 0)
-      propsRes->DictionarySize = 1;
-  }
-  #endif
-  return LZMA_RESULT_OK;
-}
-#endif
-
-#define kLzmaStreamWasFinishedId (-1)
-
-int LzmaDecode(CLzmaDecoderState *vs,
-    #ifdef _LZMA_IN_CB
-    ILzmaInCallback *InCallback,
-    #else
-    const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
-    #endif
-    unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
-{
-  CProb *p = vs->Probs;
-  SizeT nowPos = 0;
-  Byte previousByte = 0;
-  UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
-  UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
-  int lc = vs->Properties.lc;
-
-  #ifdef _LZMA_OUT_READ
-  
-  UInt32 Range = vs->Range;
-  UInt32 Code = vs->Code;
-  #ifdef _LZMA_IN_CB
-  const Byte *Buffer = vs->Buffer;
-  const Byte *BufferLim = vs->BufferLim;
-  #else
-  const Byte *Buffer = inStream;
-  const Byte *BufferLim = inStream + inSize;
-  #endif
-  int state = vs->State;
-  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
-  int len = vs->RemainLen;
-  UInt32 globalPos = vs->GlobalPos;
-  UInt32 distanceLimit = vs->DistanceLimit;
-
-  Byte *dictionary = vs->Dictionary;
-  UInt32 dictionarySize = vs->Properties.DictionarySize;
-  UInt32 dictionaryPos = vs->DictionaryPos;
-
-  Byte tempDictionary[4];
-
-  #ifndef _LZMA_IN_CB
-  *inSizeProcessed = 0;
-  #endif
-  *outSizeProcessed = 0;
-  if (len == kLzmaStreamWasFinishedId)
-    return LZMA_RESULT_OK;
-
-  if (dictionarySize == 0)
-  {
-    dictionary = tempDictionary;
-    dictionarySize = 1;
-    tempDictionary[0] = vs->TempDictionary[0];
-  }
-
-  if (len == kLzmaNeedInitId)
-  {
-    {
-      UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
-      UInt32 i;
-      for (i = 0; i < numProbs; i++)
-        p[i] = kBitModelTotal >> 1; 
-      rep0 = rep1 = rep2 = rep3 = 1;
-      state = 0;
-      globalPos = 0;
-      distanceLimit = 0;
-      dictionaryPos = 0;
-      dictionary[dictionarySize - 1] = 0;
-      #ifdef _LZMA_IN_CB
-      RC_INIT;
-      #else
-      RC_INIT(inStream, inSize);
-      #endif
-    }
-    len = 0;
-  }
-  while(len != 0 && nowPos < outSize)
-  {
-    UInt32 pos = dictionaryPos - rep0;
-    if (pos >= dictionarySize)
-      pos += dictionarySize;
-    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
-    if (++dictionaryPos == dictionarySize)
-      dictionaryPos = 0;
-    len--;
-  }
-  if (dictionaryPos == 0)
-    previousByte = dictionary[dictionarySize - 1];
-  else
-    previousByte = dictionary[dictionaryPos - 1];
-
-  #else /* if !_LZMA_OUT_READ */
-
-  int state = 0;
-  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
-  int len = 0;
-  const Byte *Buffer;
-  const Byte *BufferLim;
-  UInt32 Range;
-  UInt32 Code;
-
-  #ifndef _LZMA_IN_CB
-  *inSizeProcessed = 0;
-  #endif
-  *outSizeProcessed = 0;
-
-  {
-    UInt32 i;
-    UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
-    for (i = 0; i < numProbs; i++)
-      p[i] = kBitModelTotal >> 1;
-  }
-  
-  #ifdef _LZMA_IN_CB
-  RC_INIT;
-  #else
-  RC_INIT(inStream, inSize);
-  #endif
-
-  #endif /* _LZMA_OUT_READ */
-
-  while(nowPos < outSize)
-  {
-    CProb *prob;
-    UInt32 bound;
-    int posState = (int)(
-        (nowPos 
-        #ifdef _LZMA_OUT_READ
-        + globalPos
-        #endif
-        )
-        & posStateMask);
-
-    prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
-    IfBit0(prob)
-    {
-      int symbol = 1;
-      UpdateBit0(prob)
-      prob = p + Literal + (LZMA_LIT_SIZE * 
-        (((
-        (nowPos 
-        #ifdef _LZMA_OUT_READ
-        + globalPos
-        #endif
-        )
-        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-
-      if (state >= kNumLitStates)
-      {
-        int matchByte;
-        #ifdef _LZMA_OUT_READ
-        UInt32 pos = dictionaryPos - rep0;
-        if (pos >= dictionarySize)
-          pos += dictionarySize;
-        matchByte = dictionary[pos];
-        #else
-        matchByte = outStream[nowPos - rep0];
-        #endif
-        do
-        {
-          int bit;
-          CProb *probLit;
-          matchByte <<= 1;
-          bit = (matchByte & 0x100);
-          probLit = prob + 0x100 + bit + symbol;
-          RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
-        }
-        while (symbol < 0x100);
-      }
-      while (symbol < 0x100)
-      {
-        CProb *probLit = prob + symbol;
-        RC_GET_BIT(probLit, symbol)
-      }
-      previousByte = (Byte)symbol;
-
-      outStream[nowPos++] = previousByte;
-      #ifdef _LZMA_OUT_READ
-      if (distanceLimit < dictionarySize)
-        distanceLimit++;
-
-      dictionary[dictionaryPos] = previousByte;
-      if (++dictionaryPos == dictionarySize)
-        dictionaryPos = 0;
-      #endif
-      if (state < 4) state = 0;
-      else if (state < 10) state -= 3;
-      else state -= 6;
-    }
-    else             
-    {
-      UpdateBit1(prob);
-      prob = p + IsRep + state;
-      IfBit0(prob)
-      {
-        UpdateBit0(prob);
-        rep3 = rep2;
-        rep2 = rep1;
-        rep1 = rep0;
-        state = state < kNumLitStates ? 0 : 3;
-        prob = p + LenCoder;
-      }
-      else
-      {
-        UpdateBit1(prob);
-        prob = p + IsRepG0 + state;
-        IfBit0(prob)
-        {
-          UpdateBit0(prob);
-          prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
-          IfBit0(prob)
-          {
-            #ifdef _LZMA_OUT_READ
-            UInt32 pos;
-            #endif
-            UpdateBit0(prob);
-            
-            #ifdef _LZMA_OUT_READ
-            if (distanceLimit == 0)
-            #else
-            if (nowPos == 0)
-            #endif
-              return LZMA_RESULT_DATA_ERROR;
-            
-            state = state < kNumLitStates ? 9 : 11;
-            #ifdef _LZMA_OUT_READ
-            pos = dictionaryPos - rep0;
-            if (pos >= dictionarySize)
-              pos += dictionarySize;
-            previousByte = dictionary[pos];
-            dictionary[dictionaryPos] = previousByte;
-            if (++dictionaryPos == dictionarySize)
-              dictionaryPos = 0;
-            #else
-            previousByte = outStream[nowPos - rep0];
-            #endif
-            outStream[nowPos++] = previousByte;
-            #ifdef _LZMA_OUT_READ
-            if (distanceLimit < dictionarySize)
-              distanceLimit++;
-            #endif
-
-            continue;
-          }
-          else
-          {
-            UpdateBit1(prob);
-          }
-        }
-        else
-        {
-          UInt32 distance;
-          UpdateBit1(prob);
-          prob = p + IsRepG1 + state;
-          IfBit0(prob)
-          {
-            UpdateBit0(prob);
-            distance = rep1;
-          }
-          else 
-          {
-            UpdateBit1(prob);
-            prob = p + IsRepG2 + state;
-            IfBit0(prob)
-            {
-              UpdateBit0(prob);
-              distance = rep2;
-            }
-            else
-            {
-              UpdateBit1(prob);
-              distance = rep3;
-              rep3 = rep2;
-            }
-            rep2 = rep1;
-          }
-          rep1 = rep0;
-          rep0 = distance;
-        }
-        state = state < kNumLitStates ? 8 : 11;
-        prob = p + RepLenCoder;
-      }
-      {
-        int numBits, offset;
-        CProb *probLen = prob + LenChoice;
-        IfBit0(probLen)
-        {
-          UpdateBit0(probLen);
-          probLen = prob + LenLow + (posState << kLenNumLowBits);
-          offset = 0;
-          numBits = kLenNumLowBits;
-        }
-        else
-        {
-          UpdateBit1(probLen);
-          probLen = prob + LenChoice2;
-          IfBit0(probLen)
-          {
-            UpdateBit0(probLen);
-            probLen = prob + LenMid + (posState << kLenNumMidBits);
-            offset = kLenNumLowSymbols;
-            numBits = kLenNumMidBits;
-          }
-          else
-          {
-            UpdateBit1(probLen);
-            probLen = prob + LenHigh;
-            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-            numBits = kLenNumHighBits;
-          }
-        }
-        RangeDecoderBitTreeDecode(probLen, numBits, len);
-        len += offset;
-      }
-
-      if (state < 4)
-      {
-        int posSlot;
-        state += kNumLitStates;
-        prob = p + PosSlot +
-            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
-            kNumPosSlotBits);
-        RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
-        if (posSlot >= kStartPosModelIndex)
-        {
-          int numDirectBits = ((posSlot >> 1) - 1);
-          rep0 = (2 | ((UInt32)posSlot & 1));
-          if (posSlot < kEndPosModelIndex)
-          {
-            rep0 <<= numDirectBits;
-            prob = p + SpecPos + rep0 - posSlot - 1;
-          }
-          else
-          {
-            numDirectBits -= kNumAlignBits;
-            do
-            {
-              RC_NORMALIZE
-              Range >>= 1;
-              rep0 <<= 1;
-              if (Code >= Range)
-              {
-                Code -= Range;
-                rep0 |= 1;
-              }
-            }
-            while (--numDirectBits != 0);
-            prob = p + Align;
-            rep0 <<= kNumAlignBits;
-            numDirectBits = kNumAlignBits;
-          }
-          {
-            int i = 1;
-            int mi = 1;
-            do
-            {
-              CProb *prob3 = prob + mi;
-              RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
-              i <<= 1;
-            }
-            while(--numDirectBits != 0);
-          }
-        }
-        else
-          rep0 = posSlot;
-        if (++rep0 == (UInt32)(0))
-        {
-          /* it's for stream version */
-          len = kLzmaStreamWasFinishedId;
-          break;
-        }
-      }
-
-      len += kMatchMinLen;
-      #ifdef _LZMA_OUT_READ
-      if (rep0 > distanceLimit) 
-      #else
-      if (rep0 > nowPos)
-      #endif
-        return LZMA_RESULT_DATA_ERROR;
-
-      #ifdef _LZMA_OUT_READ
-      if (dictionarySize - distanceLimit > (UInt32)len)
-        distanceLimit += len;
-      else
-        distanceLimit = dictionarySize;
-      #endif
-
-      do
-      {
-        #ifdef _LZMA_OUT_READ
-        UInt32 pos = dictionaryPos - rep0;
-        if (pos >= dictionarySize)
-          pos += dictionarySize;
-        previousByte = dictionary[pos];
-        dictionary[dictionaryPos] = previousByte;
-        if (++dictionaryPos == dictionarySize)
-          dictionaryPos = 0;
-        #else
-        previousByte = outStream[nowPos - rep0];
-        #endif
-        len--;
-        outStream[nowPos++] = previousByte;
-      }
-      while(len != 0 && nowPos < outSize);
-    }
-  }
-  RC_NORMALIZE;
-
-  #ifdef _LZMA_OUT_READ
-  vs->Range = Range;
-  vs->Code = Code;
-  vs->DictionaryPos = dictionaryPos;
-  vs->GlobalPos = globalPos + (UInt32)nowPos;
-  vs->DistanceLimit = distanceLimit;
-  vs->Reps[0] = rep0;
-  vs->Reps[1] = rep1;
-  vs->Reps[2] = rep2;
-  vs->Reps[3] = rep3;
-  vs->State = state;
-  vs->RemainLen = len;
-  vs->TempDictionary[0] = tempDictionary[0];
-  #endif
-
-  #ifdef _LZMA_IN_CB
-  vs->Buffer = Buffer;
-  vs->BufferLim = BufferLim;
-  #else
-  *inSizeProcessed = (SizeT)(Buffer - inStream);
-  #endif
-  *outSizeProcessed = nowPos;
-  return LZMA_RESULT_OK;
-}
diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/LzmaDecode.h b/openwrt/target/linux/image/generic/lzma-loader/src/LzmaDecode.h
deleted file mode 100644
index 213062af12..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/src/LzmaDecode.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* 
-  LzmaDecode.h
-  LZMA Decoder interface
-
-  LZMA SDK 4.21 Copyright (c) 1999-2005 Igor Pavlov (2005-06-08)
-  http://www.7-zip.org/
-
-  LZMA SDK is licensed under two licenses:
-  1) GNU Lesser General Public License (GNU LGPL)
-  2) Common Public License (CPL)
-  It means that you can select one of these two licenses and 
-  follow rules of that license.
-
-  SPECIAL EXCEPTION:
-  Igor Pavlov, as the author of this code, expressly permits you to 
-  statically or dynamically link your code (or bind by name) to the 
-  interfaces of this file without subjecting your linked code to the 
-  terms of the CPL or GNU LGPL. Any modifications or additions 
-  to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#ifndef __LZMADECODE_H
-#define __LZMADECODE_H
-
-/* #define _LZMA_IN_CB */
-/* Use callback for input data */
-
-/* #define _LZMA_OUT_READ */
-/* Use read function for output data */
-
-/* #define _LZMA_PROB32 */
-/* It can increase speed on some 32-bit CPUs, 
-   but memory usage will be doubled in that case */
-
-/* #define _LZMA_LOC_OPT */
-/* Enable local speed optimizations inside code */
-
-/* #define _LZMA_SYSTEM_SIZE_T */
-/* Use system's size_t. You can use it to enable 64-bit sizes supporting*/
-
-#ifndef UInt32
-#ifdef _LZMA_UINT32_IS_ULONG
-#define UInt32 unsigned long
-#else
-#define UInt32 unsigned int
-#endif
-#endif
-
-#ifndef SizeT
-#ifdef _LZMA_SYSTEM_SIZE_T
-#include <stddef.h>
-#define SizeT size_t
-#else
-#define SizeT UInt32
-#endif
-#endif
-
-#ifdef _LZMA_PROB32
-#define CProb UInt32
-#else
-#define CProb unsigned short
-#endif
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-
-#ifdef _LZMA_IN_CB
-typedef struct _ILzmaInCallback
-{
-  int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
-} ILzmaInCallback;
-#endif
-
-#define LZMA_BASE_SIZE 1846
-#define LZMA_LIT_SIZE 768
-
-#define LZMA_PROPERTIES_SIZE 5
-
-typedef struct _CLzmaProperties
-{
-  int lc;
-  int lp;
-  int pb;
-  #ifdef _LZMA_OUT_READ
-  UInt32 DictionarySize;
-  #endif
-}CLzmaProperties;
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
-
-#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
-
-#define kLzmaNeedInitId (-2)
-
-typedef struct _CLzmaDecoderState
-{
-  CLzmaProperties Properties;
-  CProb *Probs;
-
-  #ifdef _LZMA_IN_CB
-  const unsigned char *Buffer;
-  const unsigned char *BufferLim;
-  #endif
-
-  #ifdef _LZMA_OUT_READ
-  unsigned char *Dictionary;
-  UInt32 Range;
-  UInt32 Code;
-  UInt32 DictionaryPos;
-  UInt32 GlobalPos;
-  UInt32 DistanceLimit;
-  UInt32 Reps[4];
-  int State;
-  int RemainLen;
-  unsigned char TempDictionary[4];
-  #endif
-} CLzmaDecoderState;
-
-#ifdef _LZMA_OUT_READ
-#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
-#endif
-
-int LzmaDecode(CLzmaDecoderState *vs,
-    #ifdef _LZMA_IN_CB
-    ILzmaInCallback *inCallback,
-    #else
-    const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
-    #endif
-    unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
-
-#endif
diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/Makefile b/openwrt/target/linux/image/generic/lzma-loader/src/Makefile
deleted file mode 100644
index 8dfd76a6a2..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/src/Makefile
+++ /dev/null
@@ -1,42 +0,0 @@
-LOADADDR = 0x80400000		# RAM start + 4M
-KERNEL_ENTRY = 0x80001000
-RAMSIZE = 0x00100000		# 1MB
-
-CROSS_COMPILE = mips-linux-
-
-.S.s:
-	$(CPP) $(CFLAGS) $< -o $*.s
-.S.o:
-	$(CC) $(CFLAGS) -c $< -o $*.o
-.c.o:
-	$(CC) $(CFLAGS) -c $< -o $*.o
-
-CC =       $(CROSS_COMPILE)gcc
-LD =       $(CROSS_COMPILE)ld
-OBJCOPY =  $(CROSS_COMPILE)objcopy
-OBJDUMP =  $(CROSS_COMPILE)objdump
-
-CFLAGS = -fno-builtin -Os -G 0 -mno-abicalls -fno-pic -Wall -DRAMSIZE=${RAMSIZE} -DKERNEL_ENTRY=${KERNEL_ENTRY} -D_LZMA_IN_CB
-# CFLAGS = -fno-builtin -Os -G 0 -mno-abicalls -fno-pic -Wall -DRAMSIZE=${RAMSIZE}
-
-O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32)
-
-# Drop some uninteresting sections in the kernel.
-# This is only relevant for ELF kernels but doesn't hurt a.out
-drop-sections   = .reginfo .mdebug .comment
-strip-flags     = $(addprefix --remove-section=,$(drop-sections))
-
-
-all : lzma.elf
-
-lzma.lds: lzma.lds.in
-	sed -e 's,@LOADADDR@,$(LOADADDR),g' $< >$@
-
-kernel.o: vmlinux.lzma lzma.lds
-	$(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $<
-
-lzma.elf: start.o decompress.o LzmaDecode.o kernel.o
-	$(LD) -s -Tlzma.lds -o $@ $^
-
-clean:
-	rm -f *.o lzma.elf
diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/decompress.c b/openwrt/target/linux/image/generic/lzma-loader/src/decompress.c
deleted file mode 100644
index f602276ddc..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/src/decompress.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * LZMA compressed kernel decompressor for bcm947xx boards
- *
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- *
- * Please note, this was code based on the bunzip2 decompressor code
- * by Manuel Novoa III  (mjn3@codepoet.org), although the only thing left
- * is an idea and part of original vendor code
- *
- *
- * 12-Mar-2005  Mineharu Takahara <mtakahar@yahoo.com>
- *   pass actual output size to decoder (stream mode
- *   compressed input is not a requirement anymore)
- *
- * 24-Apr-2005 Oleg I. Vdovikin
- *   reordered functions using lds script, removed forward decl
- *
- * ??-Nov-2005 Mike Baker
- *   reorder the script as an lzma wrapper; do not depend on flash access
- */
-
-#include "LzmaDecode.h"
-
-#define KSEG0			0x80000000
-#define KSEG1			0xa0000000
-
-#define KSEG1ADDR(a)		((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
-
-#define Index_Invalidate_I	0x00
-#define Index_Writeback_Inv_D   0x01
-
-#define cache_unroll(base,op)	\
-	__asm__ __volatile__(		\
-		".set noreorder;\n"		\
-		".set mips3;\n"			\
-		"cache %1, (%0);\n"		\
-		".set mips0;\n"			\
-		".set reorder\n"		\
-		:						\
-		: "r" (base),			\
-		  "i" (op));
-
-
-static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
-{
-	unsigned long start = KSEG0;
-	unsigned long end = (start + size);
-
-	while(start < end) {
-		cache_unroll(start,Index_Invalidate_I);
-		start += lsize;
-	}
-}
-
-static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
-{
-	unsigned long start = KSEG0;
-	unsigned long end = (start + size);
-
-	while(start < end) {
-		cache_unroll(start,Index_Writeback_Inv_D);
-		start += lsize;
-	}
-}
-
-unsigned char *data;
-
-static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
-{
-	*bufferSize = 1;
-	*buffer = data;
-	++data;
-	return LZMA_RESULT_OK;
-}
-
-static __inline__ unsigned char get_byte(void)
-{
-	unsigned char *buffer;
-	UInt32 fake;
-	
-	return read_byte(0, &buffer, &fake), *buffer;
-}
-
-static char *buffer = (char *)0x80C00000;
-extern char lzma_start[];
-extern char lzma_end[];
-
-/* should be the first function */
-void entry(unsigned long icache_size, unsigned long icache_lsize, 
-	unsigned long dcache_size, unsigned long dcache_lsize)
-{
-	unsigned int i;  /* temp value */
-	unsigned int osize; /* uncompressed size */
-
-	ILzmaInCallback callback;
-	CLzmaDecoderState vs;
-	callback.Read = read_byte;
-
-	data = lzma_start;
-
-	/* lzma args */
-	i = get_byte();
-	vs.Properties.lc = i % 9, i = i / 9;
-	vs.Properties.lp = i % 5, vs.Properties.pb = i / 5;
-
-	vs.Probs = (CProb *)buffer;
-
-	/* skip rest of the LZMA coder property */
-	for (i = 0; i < 4; i++)
-		get_byte();
-
-	/* read the lower half of uncompressed size in the header */
-	osize = ((unsigned int)get_byte()) +
-		((unsigned int)get_byte() << 8) +
-		((unsigned int)get_byte() << 16) +
-		((unsigned int)get_byte() << 24);
-
-	/* skip rest of the header (upper half of uncompressed size) */
-	for (i = 0; i < 4; i++) 
-		get_byte();
-
-	/* decompress kernel */
-	if ((i = LzmaDecode(&vs, &callback,
-	(unsigned char*)KERNEL_ENTRY, osize, &osize)) == LZMA_RESULT_OK)
-	{
-		blast_dcache(dcache_size, dcache_lsize);
-		blast_icache(icache_size, icache_lsize);
-
-		/* Jump to load address */
-		((void (*)(void)) KERNEL_ENTRY)();
-	}
-}
diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/lzma.lds.in b/openwrt/target/linux/image/generic/lzma-loader/src/lzma.lds.in
deleted file mode 100644
index 5ac555bf7d..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/src/lzma.lds.in
+++ /dev/null
@@ -1,23 +0,0 @@
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = @LOADADDR@;
-  .text      :
-  {
-    _ftext = . ;
-    *(.text)
-    *(.rodata)
-    lzma_start = .;
-    kernel.o
-    lzma_end = .;
-  } =0
-
-  .reginfo : { *(.reginfo) }
-
-  .bss       :
-  {
-   *(.bss)
-  }
-}
diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/print.c b/openwrt/target/linux/image/generic/lzma-loader/src/print.c
deleted file mode 100644
index 950687beff..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/src/print.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include	"print.h"
-
-/* macros */
-#define		IsDigit(x)	( ((x) >= '0') && ((x) <= '9') )
-#define		Ctod(x)		( (x) - '0')
-
-/* forward declaration */
-extern int PrintChar(char *, char, int, int);
-extern int PrintString(char *, char *, int, int);
-extern int PrintNum(char *, unsigned long, int, int, int, int, char, int);
-
-/* private variable */
-static const char theFatalMsg[] = "fatal error in lp_Print!";
-
-/* -*-
- * A low level printf() function.
- */
-void
-lp_Print(void (*output)(void *, char *, int), 
-	 void * arg,
-	 char *fmt, 
-	 va_list ap)
-{
-
-#define 	OUTPUT(arg, s, l)  \
-  { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \
-       (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \
-    } else { \
-      (*output)(arg, s, l); \
-    } \
-  }
-    
-    char buf[LP_MAX_BUF];
-
-    char c;
-    char *s;
-    long int num;
-
-    int longFlag;
-    int negFlag;
-    int width;
-    int prec;
-    int ladjust;
-    char padc;
-
-    int length;
-
-    for(;;) {
-	{ 
-	    /* scan for the next '%' */
-	    char *fmtStart = fmt;
-	    while ( (*fmt != '\0') && (*fmt != '%')) {
-		fmt ++;
-	    }
-
-	    /* flush the string found so far */
-	    OUTPUT(arg, fmtStart, fmt-fmtStart);
-
-	    /* are we hitting the end? */
-	    if (*fmt == '\0') break;
-	}
-
-	/* we found a '%' */
-	fmt ++;
-	
-	/* check for long */
-	if (*fmt == 'l') {
-	    longFlag = 1;
-	    fmt ++;
-	} else {
-	    longFlag = 0;
-	}
-
-	/* check for other prefixes */
-	width = 0;
-	prec = -1;
-	ladjust = 0;
-	padc = ' ';
-
-	if (*fmt == '-') {
-	    ladjust = 1;
-	    fmt ++;
-	}
-
-	if (*fmt == '0') {
-	    padc = '0';
-	    fmt++;
-	}
-
-	if (IsDigit(*fmt)) {
-	    while (IsDigit(*fmt)) {
-		width = 10 * width + Ctod(*fmt++);
-	    }
-	}
-
-	if (*fmt == '.') {
-	    fmt ++;
-	    if (IsDigit(*fmt)) {
-		prec = 0;
-		while (IsDigit(*fmt)) {
-		    prec = prec*10 + Ctod(*fmt++);
-		}
-	    }
-	}
-
-
-	/* check format flag */
-	negFlag = 0;
-	switch (*fmt) {
-	 case 'b':
-	    if (longFlag) { 
-		num = va_arg(ap, long int); 
-	    } else { 
-		num = va_arg(ap, int);
-	    }
-	    length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0);
-	    OUTPUT(arg, buf, length);
-	    break;
-
-	 case 'd':
-	 case 'D':
-	    if (longFlag) { 
-		num = va_arg(ap, long int);
-	    } else { 
-		num = va_arg(ap, int); 
-	    }
-	    if (num < 0) {
-		num = - num;
-		negFlag = 1;
-	    }
-	    length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0);
-	    OUTPUT(arg, buf, length);
-	    break;
-
-	 case 'o':
-	 case 'O':
-	    if (longFlag) { 
-		num = va_arg(ap, long int);
-	    } else { 
-		num = va_arg(ap, int); 
-	    }
-	    length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0);
-	    OUTPUT(arg, buf, length);
-	    break;
-
-	 case 'u':
-	 case 'U':
-	    if (longFlag) { 
-		num = va_arg(ap, long int);
-	    } else { 
-		num = va_arg(ap, int); 
-	    }
-	    length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0);
-	    OUTPUT(arg, buf, length);
-	    break;
-	    
-	 case 'x':
-	    if (longFlag) { 
-		num = va_arg(ap, long int);
-	    } else { 
-		num = va_arg(ap, int); 
-	    }
-	    length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0);
-	    OUTPUT(arg, buf, length);
-	    break;
-
-	 case 'X':
-	    if (longFlag) { 
-		num = va_arg(ap, long int);
-	    } else { 
-		num = va_arg(ap, int); 
-	    }
-	    length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1);
-	    OUTPUT(arg, buf, length);
-	    break;
-
-	 case 'c':
-	    c = (char)va_arg(ap, int);
-	    length = PrintChar(buf, c, width, ladjust);
-	    OUTPUT(arg, buf, length);
-	    break;
-
-	 case 's':
-	    s = (char*)va_arg(ap, char *);
-	    length = PrintString(buf, s, width, ladjust);
-	    OUTPUT(arg, buf, length);
-	    break;
-
-	 case '\0':
-	    fmt --;
-	    break;
-
-	 default:
-	    /* output this char as it is */
-	    OUTPUT(arg, fmt, 1);
-	}	/* switch (*fmt) */
-
-	fmt ++;
-    }		/* for(;;) */
-
-    /* special termination call */
-    OUTPUT(arg, "\0", 1);
-}
-
-
-/* --------------- local help functions --------------------- */
-int
-PrintChar(char * buf, char c, int length, int ladjust)
-{
-    int i;
-    
-    if (length < 1) length = 1;
-    if (ladjust) {
-	*buf = c;
-	for (i=1; i< length; i++) buf[i] = ' ';
-    } else {
-	for (i=0; i< length-1; i++) buf[i] = ' ';
-	buf[length - 1] = c;
-    }
-    return length;
-}
-
-int
-PrintString(char * buf, char* s, int length, int ladjust)
-{
-    int i;
-    int len=0;
-    char* s1 = s;
-    while (*s1++) len++;
-    if (length < len) length = len;
-
-    if (ladjust) {
-	for (i=0; i< len; i++) buf[i] = s[i];
-	for (i=len; i< length; i++) buf[i] = ' ';
-    } else {
-	for (i=0; i< length-len; i++) buf[i] = ' ';
-	for (i=length-len; i < length; i++) buf[i] = s[i-length+len];
-    }
-    return length;
-}
-
-int
-PrintNum(char * buf, unsigned long u, int base, int negFlag, 
-	 int length, int ladjust, char padc, int upcase)
-{
-    /* algorithm :
-     *  1. prints the number from left to right in reverse form.
-     *  2. fill the remaining spaces with padc if length is longer than
-     *     the actual length
-     *     TRICKY : if left adjusted, no "0" padding.
-     *		    if negtive, insert  "0" padding between "0" and number.
-     *  3. if (!ladjust) we reverse the whole string including paddings
-     *  4. otherwise we only reverse the actual string representing the num.
-     */
-
-    int actualLength =0;
-    char *p = buf;
-    int i;
-
-    do {
-	int tmp = u %base;
-	if (tmp <= 9) {
-	    *p++ = '0' + tmp;
-	} else if (upcase) {
-	    *p++ = 'A' + tmp - 10;
-	} else {
-	    *p++ = 'a' + tmp - 10;
-	}
-	u /= base;
-    } while (u != 0);
-
-    if (negFlag) {
-	*p++ = '-';
-    }
-
-    /* figure out actual length and adjust the maximum length */
-    actualLength = p - buf;
-    if (length < actualLength) length = actualLength;
-
-    /* add padding */
-    if (ladjust) {
-	padc = ' ';
-    }
-    if (negFlag && !ladjust && (padc == '0')) {
-	for (i = actualLength-1; i< length-1; i++) buf[i] = padc;
-	buf[length -1] = '-';
-    } else {
-	for (i = actualLength; i< length; i++) buf[i] = padc;
-    }
-	    
-
-    /* prepare to reverse the string */
-    {
-	int begin = 0;
-	int end;
-	if (ladjust) {
-	    end = actualLength - 1;
-	} else {
-	    end = length -1;
-	}
-
-	while (end > begin) {
-	    char tmp = buf[begin];
-	    buf[begin] = buf[end];
-	    buf[end] = tmp;
-	    begin ++;
-	    end --;
-	}
-    }
-
-    /* adjust the string pointer */
-    return length;
-}
diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/print.h b/openwrt/target/linux/image/generic/lzma-loader/src/print.h
deleted file mode 100644
index b051463909..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/src/print.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef _print_h_
-#define _print_h_
-
-#include <stdarg.h>
-
-/* this is the maximum width for a variable */
-#define		LP_MAX_BUF	80
-
-/* -*-
- * output function takes an void pointer which is passed in as the
- * second argument in lp_Print().  This black-box argument gives output
- * function a way to track state.
- *
- * The second argument in output function is a pointer to char buffer.
- * The third argument specifies the number of chars to outputed.
- *
- * output function cannot assume the buffer is null-terminated after
- * l number of chars.
- */
-void lp_Print(void (*output)(void *, char *, int), 
-	      void * arg,
-	      char *fmt, 
-	      va_list ap);
-
-#endif
diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/printf.c b/openwrt/target/linux/image/generic/lzma-loader/src/printf.c
deleted file mode 100644
index 49bd50d7c7..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/src/printf.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include "printf.h"
-#include "print.h"
-#include "uart16550.h"
-
-static void myoutput(void *arg, char *s, int l)
-{
-    int i;
-
-    // special termination call
-    if ((l==1) && (s[0] == '\0')) return;
-    
-    for (i=0; i< l; i++) {
-	Uart16550Put(s[i]);
-	if (s[i] == '\n') Uart16550Put('\r');
-    }
-}
-
-void printf(char *fmt, ...)
-{
-    va_list ap;
-    va_start(ap, fmt);
-    lp_Print(myoutput, 0, fmt, ap);
-    va_end(ap);
-}
diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/printf.h b/openwrt/target/linux/image/generic/lzma-loader/src/printf.h
deleted file mode 100644
index 9b1c1df232..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/src/printf.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef _printf_h_
-#define _printf_h_
-
-#include <stdarg.h>
-void printf(char *fmt, ...);
-
-#endif /* _printf_h_ */
diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/start.S b/openwrt/target/linux/image/generic/lzma-loader/src/start.S
deleted file mode 100644
index 37c7ca36d3..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/src/start.S
+++ /dev/null
@@ -1,136 +0,0 @@
-#include <asm/asm.h>
-#include <asm/regdef.h>
-
-#define KSEG0		0x80000000
-
-#define C0_CONFIG	$16
-#define C0_TAGLO	$28
-#define C0_TAGHI	$29
-
-#define	CONF1_DA_SHIFT	7			/* D$ associativity */
-#define CONF1_DA_MASK	0x00000380
-#define CONF1_DA_BASE	1
-#define CONF1_DL_SHIFT	10			/* D$ line size */
-#define CONF1_DL_MASK	0x00001c00
-#define CONF1_DL_BASE	2
-#define CONF1_DS_SHIFT	13			/* D$ sets/way */
-#define CONF1_DS_MASK	0x0000e000
-#define CONF1_DS_BASE	64
-#define CONF1_IA_SHIFT	16			/* I$ associativity */
-#define CONF1_IA_MASK	0x00070000
-#define CONF1_IA_BASE	1
-#define CONF1_IL_SHIFT	19			/* I$ line size */
-#define CONF1_IL_MASK	0x00380000
-#define CONF1_IL_BASE	2
-#define CONF1_IS_SHIFT	22			/* Instruction cache sets/way */
-#define CONF1_IS_MASK	0x01c00000
-#define CONF1_IS_BASE	64
-
-#define Index_Invalidate_I	0x00
-#define Index_Writeback_Inv_D   0x01
-
-LEAF(_start)
-	
-	.set	mips32
-	.set noreorder
-
-	/* set up stack */
-	li	sp, 0xa0000000 + RAMSIZE - 16
-	
-	
-	/* At this point we need to invalidate dcache and */
-	/* icache before jumping to new code */
-
-1:	/* Get cache sizes */
-	mfc0	s0,C0_CONFIG,1
-
-	li	s1,CONF1_DL_MASK
-	and	s1,s0
-	beq	s1,zero,nodc
-	nop
-
-	srl	s1,CONF1_DL_SHIFT
-	li	t0,CONF1_DL_BASE
-	sll	s1,t0,s1		/* s1 has D$ cache line size */
-
-	li	s2,CONF1_DA_MASK
-	and	s2,s0
-	srl	s2,CONF1_DA_SHIFT
-	addiu	s2,CONF1_DA_BASE	/* s2 now has D$ associativity */
-
-	li	t0,CONF1_DS_MASK
-	and	t0,s0
-	srl	t0,CONF1_DS_SHIFT
-	li	s3,CONF1_DS_BASE
-	sll	s3,s3,t0		/* s3 has D$ sets per way */
-
-	multu	s2,s3			/* sets/way * associativity */
-	mflo	t0			/* total cache lines */
-
-	multu	s1,t0			/* D$ linesize * lines */
-	mflo	s2			/* s2 is now D$ size in bytes */
-
-	/* Initilize the D$: */
-	mtc0	zero,C0_TAGLO
-	mtc0	zero,C0_TAGHI
-
-	li	t0,KSEG0		/* Just an address for the first $ line */
-	addu	t1,t0,s2		/*  + size of cache == end */
-
-1:	cache	Index_Writeback_Inv_D,0(t0)
-	bne	t0,t1,1b
-	addu	t0,s1
-	
-nodc:
-	/* Now we get to do it all again for the I$ */
-	
-	move	s3,zero			/* just in case there is no icache */
-	move	s4,zero
-
-	li	t0,CONF1_IL_MASK
-	and	t0,s0
-	beq	t0,zero,noic
-	nop
-
-	srl	t0,CONF1_IL_SHIFT
-	li	s3,CONF1_IL_BASE
-	sll	s3,t0			/* s3 has I$ cache line size */
-
-	li	t0,CONF1_IA_MASK
-	and	t0,s0
-	srl	t0,CONF1_IA_SHIFT
-	addiu	s4,t0,CONF1_IA_BASE	/* s4 now has I$ associativity */
-
-	li	t0,CONF1_IS_MASK
-	and	t0,s0
-	srl	t0,CONF1_IS_SHIFT
-	li	s5,CONF1_IS_BASE
-	sll	s5,t0			/* s5 has I$ sets per way */
-
-	multu	s4,s5			/* sets/way * associativity */
-	mflo	t0			/* s4 is now total cache lines */
-
-	multu	s3,t0			/* I$ linesize * lines */
-	mflo	s4			/* s4 is cache size in bytes */
-
-	/* Initilize the I$: */
-	mtc0	zero,C0_TAGLO
-	mtc0	zero,C0_TAGHI
-
-	li	t0,KSEG0		/* Just an address for the first $ line */
-	addu	t1,t0,s4		/*  + size of cache == end */
-
-1:	cache	Index_Invalidate_I,0(t0)
-	bne	t0,t1,1b
-	addu	t0,s3
-noic:
-	/* jump to main */
-	move    a0,s3                   /* icache line size */
-	move    a1,s4                   /* icache size */
-	move    a2,s1                   /* dcache line size */
-	jal     entry
-	move    a3,s2                   /* dcache size */
-
-	.set reorder
-END(_start)
-
diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/uart16550.c b/openwrt/target/linux/image/generic/lzma-loader/src/uart16550.c
deleted file mode 100644
index 7df5727600..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/src/uart16550.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-
-#include "uart16550.h"
-
-/* === CONFIG === */
-
-#define         BASE                    0xb8058000
-#define         MAX_BAUD                1152000
-#define         REG_OFFSET              4
-
-/* === END OF CONFIG === */
-
-/* register offset */
-#define         OFS_RCV_BUFFER          (0*REG_OFFSET)
-#define         OFS_TRANS_HOLD          (0*REG_OFFSET)
-#define         OFS_SEND_BUFFER         (0*REG_OFFSET)
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)    (*((volatile uint32*)(BASE + y)))
-#define         UART16550_WRITE(y, z)  ((*((volatile uint32*)(BASE + y))) = z)
-
-#define DEBUG_LED (*(unsigned short*)0xb7ffffc0)
-#define OutputLED(x)  (DEBUG_LED = x)
-
-void Uart16550Init(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
-    /* disable interrupts */
-    UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
-    /* set up buad rate */
-    { 
-        uint32 divisor;
-       
-        /* set DIAB bit */
-        UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-        
-        /* set divisor */
-        divisor = MAX_BAUD / baud;
-        UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-        UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00)>>8);
-
-        /* clear DIAB bit */
-        UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-    }
-
-    /* set data format */
-    UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-uint8 Uart16550GetPoll()
-{
-    while((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
-    return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-void Uart16550Put(uint8 byte)
-{
-    while ((UART16550_READ(OFS_LINE_STATUS) &0x20) == 0);
-    UART16550_WRITE(OFS_SEND_BUFFER, byte);
-}
-
diff --git a/openwrt/target/linux/image/generic/lzma-loader/src/uart16550.h b/openwrt/target/linux/image/generic/lzma-loader/src/uart16550.h
deleted file mode 100644
index b3fd6fdd75..0000000000
--- a/openwrt/target/linux/image/generic/lzma-loader/src/uart16550.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef _uart16550_h_
-#define _uart16550_h_
-
-typedef         unsigned char uint8;
-typedef         unsigned int  uint32;
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-void Uart16550Init(uint32 baud, uint8 data, uint8 parity, uint8 stop);
-
-/* blocking call */
-uint8 Uart16550GetPoll();
-
-void Uart16550Put(uint8 byte);
-
-#endif
diff --git a/openwrt/target/linux/image/jffs2.mk b/openwrt/target/linux/image/jffs2.mk
deleted file mode 100644
index 281db01922..0000000000
--- a/openwrt/target/linux/image/jffs2.mk
+++ /dev/null
@@ -1,46 +0,0 @@
-ifneq ($(BR2_BIG_ENDIAN),y)
-JFFS2OPTS :=  --pad --little-endian --squash
-else
-JFFS2OPTS :=  --pad --big-endian --squash
-endif
-
-#JFFS2OPTS += -Xlzo -msize -Xlzari
-
-jffs2-prepare:
-	$(MAKE) -C jffs2 prepare $(MAKE_TRACE)
-
-jffs2-compile: prepare-targets
-	$(MAKE) -C jffs2 compile $(MAKE_TRACE)
-
-jffs2-clean:
-	$(MAKE) -C jffs2 clean $(MAKE_TRACE)
-	rm -f $(KDIR)/root.jffs2*
-
-$(KDIR)/root.jffs2-4MB: install-prepare
-	@rm -rf $(KDIR)/root/jffs
-	$(STAGING_DIR)/bin/mkfs.jffs2 $(JFFS2OPTS) -e 0x10000 -o $@ -d $(KDIR)/root $(MAKE_TRACE)
-
-$(KDIR)/root.jffs2-8MB: install-prepare
-	@rm -rf $(KDIR)/root/jffs
-	$(STAGING_DIR)/bin/mkfs.jffs2 $(JFFS2OPTS) -e 0x20000 -o $@ -d $(KDIR)/root $(MAKE_TRACE)
-
-ifeq ($(IB),)
-jffs2-install: compile-targets $(BOARD)-compile
-endif
-
-jffs2-install: $(KDIR)/root.jffs2-4MB $(KDIR)/root.jffs2-8MB
-	$(TRACE) target/linux/image/$(BOARD)/install
-	$(MAKE) -C $(BOARD) install KERNEL="$(KERNEL)" FS="jffs2-4MB"
-	$(TRACE) target/linux/image/$(BOARD)/install
-	$(MAKE) -C $(BOARD) install KERNEL="$(KERNEL)" FS="jffs2-8MB"
-
-jffs2-install-ib: compile-targets
-	mkdir -p $(IB_DIR)/staging_dir_$(ARCH)/bin
-	$(CP) $(STAGING_DIR)/bin/mkfs.jffs2 $(IB_DIR)/staging_dir_$(ARCH)/bin
-
-prepare-targets: jffs2-prepare
-compile-targets: jffs2-compile
-install-targets: jffs2-install
-install-ib: jffs2-install-ib
-clean-targets: jffs2-clean
-
diff --git a/openwrt/target/linux/image/jffs2/Makefile b/openwrt/target/linux/image/jffs2/Makefile
deleted file mode 100644
index 071bacdd47..0000000000
--- a/openwrt/target/linux/image/jffs2/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-MTD_DIR:=$(BUILD_DIR)/mtd-20050122.orig
-MTD_SOURCE=mtd_20050122.orig.tar.gz
-MTD_SITE=http://ftp.debian.org/debian/pool/main/m/mtd
-MTD_MD5SUM:=1f42c2cae08eb9e7b52d0c188f8d6338
-MKFS_JFFS2=$(MTD_DIR)/util/mkfs.jffs2
-
-$(DL_DIR)/$(MTD_SOURCE):
-	$(SCRIPT_DIR)/download.pl $(DL_DIR) $(MTD_SOURCE) $(MTD_MD5SUM) $(MTD_SITE)
-
-$(MTD_DIR)/.unpacked: $(DL_DIR)/$(MTD_SOURCE)
-	zcat $(DL_DIR)/$(MTD_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-	$(PATCH) $(MTD_DIR) ./patches
-	touch $(MTD_DIR)/.unpacked
-
-$(MTD_DIR)/util/mkfs.jffs2: $(MTD_DIR)/.unpacked
-	$(MAKE) LINUXDIR=$(LINUX_DIR) -C $(MTD_DIR)/util
-
-$(STAGING_DIR)/bin/mkfs.jffs2: $(MTD_DIR)/util/mkfs.jffs2
-	$(CP) $< $@
-
-source: $(DL_DIR)/$(MTD_SOURCE)
-prepare: $(MTD_DIR)/.unpacked
-compile: $(MTD_DIR)/util/mkfs.jffs2 $(STAGING_DIR)/bin/mkfs.jffs2
-install: 
-clean:
-	rm -rf $(MTD_DIR)
-
diff --git a/openwrt/target/linux/image/jffs2/patches/gcc4-fix.patch b/openwrt/target/linux/image/jffs2/patches/gcc4-fix.patch
deleted file mode 100644
index 50c8edb47e..0000000000
--- a/openwrt/target/linux/image/jffs2/patches/gcc4-fix.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-diff -urN mtd-20050122.orig.old/include/mtd/jffs2-user.h mtd-20050122.orig.dev/include/mtd/jffs2-user.h
---- mtd-20050122.orig.old/include/mtd/jffs2-user.h	2004-05-05 13:57:54.000000000 +0200
-+++ mtd-20050122.orig.dev/include/mtd/jffs2-user.h	2005-07-02 10:03:09.000000000 +0200
-@@ -19,8 +19,6 @@
- #undef je32_to_cpu
- #undef jemode_to_cpu
- 
--extern int target_endian;
--
- #define t16(x) ({ uint16_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_16(__b); })
- #define t32(x) ({ uint32_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_32(__b); })
- 
-diff -urN mtd.old/util/jffs3.h mtd.dev/util/jffs3.h
---- mtd.old/util/jffs3.h	2005-01-22 00:00:13.000000000 +0100
-+++ mtd.dev/util/jffs3.h	2005-07-17 17:48:24.000000000 +0200
-@@ -177,8 +177,6 @@
- #undef je32_to_cpu
- #undef jemode_to_cpu
- 
--extern int target_endian;
--
- #define t16(x) ({ uint16_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_16(__b); })
- #define t32(x) ({ uint32_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_32(__b); })
- 
diff --git a/openwrt/target/linux/image/squashfs.mk b/openwrt/target/linux/image/squashfs.mk
deleted file mode 100644
index 9d344ba5ff..0000000000
--- a/openwrt/target/linux/image/squashfs.mk
+++ /dev/null
@@ -1,37 +0,0 @@
-ifneq ($(BR2_BIG_ENDIAN),y)
-endian := le
-else
-endian := be
-endif
-
-squashfs-prepare:
-	$(MAKE) -C squashfs prepare $(MAKE_TRACE)
-
-squashfs-compile: prepare-targets
-	$(MAKE) -C squashfs compile $(MAKE_TRACE)
-	
-squashfs-clean:
-	$(MAKE) -C squashfs clean $(MAKE_TRACE)
-	rm -f $(KDIR)/root.squashfs
-
-$(KDIR)/root.squashfs: install-prepare
-	@mkdir -p $(KDIR)/root/jffs
-	$(STAGING_DIR)/bin/mksquashfs-lzma $(KDIR)/root $@ -nopad -noappend -root-owned -$(endian) $(MAKE_TRACE)
-	
-ifeq ($(IB),)
-squashfs-install: compile-targets $(BOARD)-compile
-endif
-
-squashfs-install: $(KDIR)/root.squashfs
-	$(TRACE) target/linux/image/$(BOARD)/install
-	$(MAKE) -C $(BOARD) install KERNEL="$(KERNEL)" FS="squashfs"
-
-squashfs-install-ib: compile-targets
-	mkdir -p $(IB_DIR)/staging_dir_$(ARCH)/bin
-	$(CP) $(STAGING_DIR)/bin/mksquashfs-lzma $(IB_DIR)/staging_dir_$(ARCH)/bin
-	
-prepare-targets: squashfs-prepare
-compile-targets: squashfs-compile
-install-targets: squashfs-install
-install-ib: squashfs-install-ib
-clean: squashfs-clean
diff --git a/openwrt/target/linux/image/squashfs/Makefile b/openwrt/target/linux/image/squashfs/Makefile
deleted file mode 100644
index b5a51f8a3a..0000000000
--- a/openwrt/target/linux/image/squashfs/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-SQUASHFSLZMA_DIR=$(BUILD_DIR)/squashfs3.0
-SQUASHFSLZMA_SOURCE=squashfs3.0.tar.gz
-SQUASHFSLZMA_SITE=@SF/squashfs
-SQUASHFSLZMA_MD5SUM=9fd05d0bfbb712f5fb95edafea5bc733
-
-$(DL_DIR)/$(SQUASHFSLZMA_SOURCE):
-	$(SCRIPT_DIR)/download.pl $(DL_DIR) $(SQUASHFSLZMA_SOURCE) $(SQUASHFSLZMA_MD5SUM) $(SQUASHFSLZMA_SITE)
-
-$(SQUASHFSLZMA_DIR)/.unpacked: $(DL_DIR)/$(SQUASHFSLZMA_SOURCE) 
-	zcat $(DL_DIR)/$(SQUASHFSLZMA_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-	$(PATCH) $(SQUASHFSLZMA_DIR) ./patches
-	touch $(SQUASHFSLZMA_DIR)/.unpacked
-
-$(SQUASHFSLZMA_DIR)/squashfs-tools/mksquashfs-lzma: $(SQUASHFSLZMA_DIR)/.unpacked
-	$(MAKE) -C $(SQUASHFSLZMA_DIR)/squashfs-tools mksquashfs-lzma LZMAPATH=$(BUILD_DIR)/lzma
-
-$(STAGING_DIR)/bin/mksquashfs-lzma: $(SQUASHFSLZMA_DIR)/squashfs-tools/mksquashfs-lzma
-	$(CP) $< $@
-
-source: $(DL_DIR)/$(SQUASHFSLZMA_SOURCE)
-prepare: $(SQUASHFSLZMA_DIR)/.unpacked
-compile: $(SQUASHFSLZMA_DIR)/squashfs-tools/mksquashfs-lzma $(STAGING_DIR)/bin/mksquashfs-lzma
-install:
-clean: 
-	rm -rf $(SQUASHFSLZMA_DIR)
diff --git a/openwrt/target/linux/image/squashfs/patches/100-lzma.patch b/openwrt/target/linux/image/squashfs/patches/100-lzma.patch
deleted file mode 100644
index 85aa21fb92..0000000000
--- a/openwrt/target/linux/image/squashfs/patches/100-lzma.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-diff -Nur squashfs3.0/squashfs-tools/Makefile squashfs3.0-owrt/squashfs-tools/Makefile
---- squashfs3.0/squashfs-tools/Makefile	2006-03-15 22:36:20.000000000 +0100
-+++ squashfs3.0-owrt/squashfs-tools/Makefile	2006-03-21 11:14:08.000000000 +0100
-@@ -1,4 +1,5 @@
- INCLUDEDIR = .
-+#LZMAPATH = ../lzma/SRC/7zip/Compress/LZMA_Lib
- 
- CFLAGS := -I$(INCLUDEDIR) -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -O2
- 
-@@ -7,6 +8,9 @@
- mksquashfs: mksquashfs.o read_fs.o sort.o
- 	$(CC) mksquashfs.o read_fs.o sort.o -lz -o $@
- 
-+mksquashfs-lzma: mksquashfs.o read_fs.o sort.o
-+	$(CXX) mksquashfs.o read_fs.o sort.o -L$(LZMAPATH) -llzma -o $@
-+
- mksquashfs.o: mksquashfs.c squashfs_fs.h mksquashfs.h global.h sort.h
- 
- read_fs.o: read_fs.c squashfs_fs.h read_fs.h global.h
-@@ -17,3 +21,5 @@
- 	$(CC) unsquashfs.o -lz -o $@
- 
- unsquashfs.o: unsquashfs.c squashfs_fs.h read_fs.h global.h
-+
-+clean:
diff --git a/openwrt/target/linux/image/tgz.mk b/openwrt/target/linux/image/tgz.mk
deleted file mode 100644
index 3839eb6b47..0000000000
--- a/openwrt/target/linux/image/tgz.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-$(KDIR)/root.tar.gz:
-	tar -zcf $@ --owner=root --group=root -C $(KDIR)/root/ .
-
-ifeq ($(BOARD),x86)
-install: tgz-install
-
-tgz-install: $(KDIR)/root.tar.gz
-	$(MAKE) -C $(BOARD) install KERNEL="$(KERNEL)" FS="tgz"
-endif
-
-prepare-targets:
-compile-targets:
-install-targets: $(KDIR)/root.tar.gz
-
diff --git a/openwrt/target/linux/image/x86/Makefile b/openwrt/target/linux/image/x86/Makefile
deleted file mode 100644
index 5820d022bc..0000000000
--- a/openwrt/target/linux/image/x86/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
-
-
-ifeq ($(FS),jffs2-8MB)
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img: $(KDIR)/root.$(FS)
-	$(CP) $^ $@
-
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img
-
-endif
-
-
-ifeq ($(FS),tgz)
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz: $(KDIR)/root.tar.gz
-	$(CP) $^ $@
-
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz
-
-endif
-
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz: $(KDIR)/bzImage
-	$(CP) $^ $@
-
-
-clean:
-prepare:
-compile:
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz
-install-ib:
-	mkdir -p $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)
-	$(CP) $(KDIR)/bzImage $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)/
diff --git a/openwrt/target/linux/image/xscale/Makefile b/openwrt/target/linux/image/xscale/Makefile
deleted file mode 100644
index 04a89f9b19..0000000000
--- a/openwrt/target/linux/image/xscale/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
-
-
-ifeq ($(FS),jffs2-8MB)
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img: $(KDIR)/root.$(FS)
-	$(CP) $^ $@
-
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img
-
-endif
-
-
-ifeq ($(FS),tgz)
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz: $(KDIR)/root.tar.gz
-	$(CP) $^ $@
-
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz
-
-endif
-
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz: $(KDIR)/vmlinux
-	$(CP) $^ $@
-
-
-clean:
-prepare:
-compile:
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz
-install-ib:
-	mkdir -p $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)
-	$(CP) $(KDIR)/bzImage $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)/
diff --git a/openwrt/target/linux/imagebuilder/Makefile b/openwrt/target/linux/imagebuilder/Makefile
deleted file mode 100644
index 4afb4d45a7..0000000000
--- a/openwrt/target/linux/imagebuilder/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-default: clean all
-
-TOPDIR:=${shell pwd}
-export TOPDIR
-IB:=1
-export IB
-include ./rules.mk
-
-LINUX_BUILD_DIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
-IPKG_KERNEL:=IPKG_TMP=$(BUILD_DIR)/tmp IPKG_INSTROOT=$(LINUX_BUILD_DIR)/root IPKG_CONF_DIR=$(LINUX_BUILD_DIR) $(SCRIPT_DIR)/ipkg -force-defaults -force-depends
-
-define image_template
-
-all: all-$(1)-$(2)
-
-all-$(1)-$(2):
-	@for listfile in ./lists/*.$(1)-$(2); do \
-		$(MAKE) -s `echo $$$$listfile | sed 's,.*lists/\(.*\).$(1)-$(2),BOARD=$(1) KERNEL=$(2) LIST=\1,'` build; \
-	done
-endef
-
-include ./kernel.mk
-
-clean:
-	@rm -rf $(LINUX_BUILD_DIR)/root*
-	@rm -rf $(BIN_DIR)
-all:
-
-build:
-	echo
-	echo '### BUILDING IMAGE FROM lists/$(LIST).$(BOARD)-$(KERNEL)'
-	echo
-	rm -rf $(LINUX_BUILD_DIR)/root*
-	mkdir -p $(BIN_DIR)/$(LIST)
-	mkdir -p $(LINUX_BUILD_DIR)/tmp
-	mkdir -p $(LINUX_BUILD_DIR)/root
-	echo -e 'dest root /\noption offline_root $(LINUX_BUILD_DIR)/root' > $(LINUX_BUILD_DIR)/ipkg.conf
-	$(IPKG_KERNEL) install $(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)/kernel[-_]*.ipk
-	for package in `grep -v '^#' lists/$(LIST).$(BOARD)-$(KERNEL)`; do \
-		$(IPKG_KERNEL) install `ls packages/$${package}_*`; \
-	done
-	if [ -d ./files ]; then \
-		$(CP) --remove-destination ./files/* $(LINUX_BUILD_DIR)/root; \
-	fi
-	if [ -d ./files.$(LIST) ]; then \
-		$(CP) --remove-destination ./files.$(LIST)/* $(LINUX_BUILD_DIR)/root; \
-	fi
-	find $(LINUX_BUILD_DIR)/root -name '.svn' || 'CVS' | xargs rm -rf
-	$(MAKE) -S -C image KERNEL="$(KERNEL)" BOARD="$(BOARD)" BIN_DIR="$(BIN_DIR)/$(LIST)" install
diff --git a/openwrt/target/linux/imagebuilder/lists/default-annex-a.ar7-2.4 b/openwrt/target/linux/imagebuilder/lists/default-annex-a.ar7-2.4
deleted file mode 100644
index 272ba926ca..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/default-annex-a.ar7-2.4
+++ /dev/null
@@ -1,21 +0,0 @@
-base-files
-base-files-ar7-2.4
-br2684ctl
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-kmod-atm
-kmod-cpmac
-kmod-pppoatm
-kmod-sangam-atm-annex-a
-kmod-ppp
-kmod-pppoe
-linux-atm
-mtd
-ppp
-ppp-mod-pppoa
-ppp-mod-pppoe
-uclibc
-wireless-tools
diff --git a/openwrt/target/linux/imagebuilder/lists/default-annex-b.ar7-2.4 b/openwrt/target/linux/imagebuilder/lists/default-annex-b.ar7-2.4
deleted file mode 100644
index 3c4c08092b..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/default-annex-b.ar7-2.4
+++ /dev/null
@@ -1,21 +0,0 @@
-base-files
-base-files-ar7-2.4
-br2684ctl
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-kmod-atm
-kmod-cpmac
-kmod-pppoatm
-kmod-sangam-atm-annex-b
-kmod-ppp
-kmod-pppoe
-linux-atm
-mtd
-ppp
-ppp-mod-pppoa
-ppp-mod-pppoe
-uclibc
-wireless-tools
diff --git a/openwrt/target/linux/imagebuilder/lists/default.brcm-2.4 b/openwrt/target/linux/imagebuilder/lists/default.brcm-2.4
deleted file mode 100644
index 59b137db84..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/default.brcm-2.4
+++ /dev/null
@@ -1,24 +0,0 @@
-base-files
-base-files-brcm
-bridge
-busybox
-dnsmasq
-dropbear
-haserl
-ipkg
-iptables
-iwlib
-kmod-brcm-wl
-kmod-diag
-kmod-ppp
-kmod-pppoe
-kmod-switch
-kmod-wlcompat
-mtd
-nvram
-ppp
-ppp-mod-pppoe
-uclibc
-webif
-wificonf
-wireless-tools
diff --git a/openwrt/target/linux/imagebuilder/lists/default.brcm-2.6 b/openwrt/target/linux/imagebuilder/lists/default.brcm-2.6
deleted file mode 100644
index 948d9c856d..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/default.brcm-2.6
+++ /dev/null
@@ -1,17 +0,0 @@
-base-files
-base-files-brcm-2.6
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-iwlib
-kmod-madwifi
-kmod-ppp
-kmod-pppoe
-kmod-switch
-mtd
-ppp
-ppp-mod-pppoe
-uclibc
-wireless-tools
diff --git a/openwrt/target/linux/imagebuilder/lists/default.x86-2.4 b/openwrt/target/linux/imagebuilder/lists/default.x86-2.4
deleted file mode 100644
index 3b3eabbd23..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/default.x86-2.4
+++ /dev/null
@@ -1,15 +0,0 @@
-base-files
-base-files-x86-2.4
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-kmod-net-natsemi
-kmod-ppp
-kmod-pppoe
-mtd
-ppp
-ppp-mod-pppoe
-uclibc
-wireless-tools
diff --git a/openwrt/target/linux/imagebuilder/lists/default.x86-2.6 b/openwrt/target/linux/imagebuilder/lists/default.x86-2.6
deleted file mode 100644
index 928114108f..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/default.x86-2.6
+++ /dev/null
@@ -1,15 +0,0 @@
-base-files
-base-files-x86-2.6
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-kmod-net-natsemi
-kmod-ppp
-kmod-pppoe
-mtd
-ppp
-ppp-mod-pppoe
-uclibc
-wireless-tools
diff --git a/openwrt/target/linux/imagebuilder/lists/micro.ar7-2.4 b/openwrt/target/linux/imagebuilder/lists/micro.ar7-2.4
deleted file mode 100644
index cea8b0b84d..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/micro.ar7-2.4
+++ /dev/null
@@ -1,11 +0,0 @@
-base-files
-base-files-ar7-2.4
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-kmod-cpmac
-mtd
-uclibc
-wireless-tools
diff --git a/openwrt/target/linux/imagebuilder/lists/micro.brcm-2.4 b/openwrt/target/linux/imagebuilder/lists/micro.brcm-2.4
deleted file mode 100644
index 4f2bae8c02..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/micro.brcm-2.4
+++ /dev/null
@@ -1,16 +0,0 @@
-base-files
-base-files-brcm-2.4
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-iwlib
-kmod-brcm-wl
-kmod-diag
-kmod-switch
-kmod-wlcompat
-mtd
-nvram
-uclibc
-wificonf
diff --git a/openwrt/target/linux/imagebuilder/lists/micro.brcm-2.6 b/openwrt/target/linux/imagebuilder/lists/micro.brcm-2.6
deleted file mode 100644
index 2d82f2493b..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/micro.brcm-2.6
+++ /dev/null
@@ -1,11 +0,0 @@
-base-files
-base-files-brcm-2.6
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-iwlib
-kmod-switch
-mtd
-uclibc
diff --git a/openwrt/target/linux/imagebuilder/lists/micro.x86-2.4 b/openwrt/target/linux/imagebuilder/lists/micro.x86-2.4
deleted file mode 100644
index 876ad19d24..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/micro.x86-2.4
+++ /dev/null
@@ -1,11 +0,0 @@
-base-files
-base-files-x86-2.4
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-kmod-net-natsemi
-mtd
-uclibc
-wireless-tools
diff --git a/openwrt/target/linux/imagebuilder/lists/micro.x86-2.6 b/openwrt/target/linux/imagebuilder/lists/micro.x86-2.6
deleted file mode 100644
index 8167004abf..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/micro.x86-2.6
+++ /dev/null
@@ -1,11 +0,0 @@
-base-files
-base-files-x86-2.6
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-kmod-net-natsemi
-mtd
-uclibc
-wireless-tools
diff --git a/openwrt/target/linux/imagebuilder/lists/pptp.brcm-2.4 b/openwrt/target/linux/imagebuilder/lists/pptp.brcm-2.4
deleted file mode 100644
index dd4126d4a4..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/pptp.brcm-2.4
+++ /dev/null
@@ -1,24 +0,0 @@
-base-files
-base-files-brcm
-bridge
-busybox
-dnsmasq
-dropbear
-haserl
-ipkg
-iptables
-iwlib
-kmod-brcm-wl
-kmod-diag
-kmod-ppp
-kmod-gre
-kmod-switch
-kmod-wlcompat
-mtd
-nvram
-ppp
-pptp
-uclibc
-webif
-wificonf
-wireless-tools
diff --git a/openwrt/target/linux/imagebuilder/lists/pptp.brcm-2.6 b/openwrt/target/linux/imagebuilder/lists/pptp.brcm-2.6
deleted file mode 100644
index 3310d5863c..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/pptp.brcm-2.6
+++ /dev/null
@@ -1,17 +0,0 @@
-base-files
-base-files-brcm-2.6
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-iwlib
-kmod-madwifi
-kmod-ppp
-kmod-gre
-kmod-switch
-mtd
-ppp
-pptp
-uclibc
-wireless-tools
diff --git a/openwrt/target/linux/imagebuilder/lists/pptp.x86-2.4 b/openwrt/target/linux/imagebuilder/lists/pptp.x86-2.4
deleted file mode 100644
index f4fac5f407..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/pptp.x86-2.4
+++ /dev/null
@@ -1,15 +0,0 @@
-base-files
-base-files-x86-2.4
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-kmod-net-natsemi
-kmod-ppp
-kmod-gre
-mtd
-ppp
-pptp
-uclibc
-wireless-tools
diff --git a/openwrt/target/linux/imagebuilder/lists/pptp.x86-2.6 b/openwrt/target/linux/imagebuilder/lists/pptp.x86-2.6
deleted file mode 100644
index 0162fa4d72..0000000000
--- a/openwrt/target/linux/imagebuilder/lists/pptp.x86-2.6
+++ /dev/null
@@ -1,15 +0,0 @@
-base-files
-base-files-x86-2.6
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-kmod-net-natsemi
-kmod-ppp
-kmod-gre
-mtd
-ppp
-pptp
-uclibc
-wireless-tools
diff --git a/openwrt/target/linux/kernel.mk b/openwrt/target/linux/kernel.mk
deleted file mode 100644
index 56817dbab8..0000000000
--- a/openwrt/target/linux/kernel.mk
+++ /dev/null
@@ -1,121 +0,0 @@
-LINUX_SOURCE:=linux-$(LINUX_VERSION).tar.bz2
-LINUX_SITE=http://www.us.kernel.org/pub/linux/kernel/v$(KERNEL) \
-           http://www.us.kernel.org/pub/linux/kernel/v$(KERNEL) \
-           http://www.kernel.org/pub/linux/kernel/v$(KERNEL) \
-           http://www.de.kernel.org/pub/linux/kernel/v$(KERNEL)
-
-KERNEL_IDIR:=$(LINUX_BUILD_DIR)/kernel-ipkg
-
-$(TARGETS): $(PACKAGE_DIR)
-
-$(PACKAGE_DIR):
-	mkdir -p $(PACKAGE_DIR)
-	
-$(DL_DIR)/$(LINUX_SOURCE):
-	-mkdir -p $(DL_DIR)
-	$(SCRIPT_DIR)/download.pl $(DL_DIR) $(LINUX_SOURCE) $(LINUX_KERNEL_MD5SUM) $(LINUX_SITE) $(MAKE_TRACE)
-
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE)
-	-mkdir -p $(LINUX_BUILD_DIR)
-	bzcat $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(LINUX_BUILD_DIR) $(TAR_OPTIONS) -
-	rm -f $(BUILD_DIR)/linux
-	ln -s $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION) $(BUILD_DIR)/linux
-	touch $@
-
-ifeq ($(KERNEL),2.4)
-$(LINUX_DIR)/.configured: $(LINUX_DIR)/.patched
-	$(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" \
-	  $(LINUX_DIR)/Makefile  \
-	  $(LINUX_DIR)/arch/*/Makefile
-	$(SED) "s,\-mcpu=,\-mtune=,g;" $(LINUX_DIR)/arch/mips/Makefile
-	$(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) oldconfig include/linux/compile.h include/linux/version.h $(MAKE_TRACE)
-	touch $@
-
-$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured
-	$(MAKE) -C $(LINUX_DIR) CROSS_COMPILE="$(KERNEL_CROSS)" ARCH=$(LINUX_KARCH) dep $(MAKE_TRACE)
-	touch $@
-
-$(LINUX_DIR)/vmlinux: $(LINUX_DIR)/.depend_done
-else
-$(LINUX_DIR)/.configured: $(LINUX_DIR)/.patched
-	$(MAKE) -C $(LINUX_DIR) CROSS_COMPILE="$(KERNEL_CROSS)" ARCH=$(LINUX_KARCH) oldconfig prepare scripts $(MAKE_TRACE)
-	touch $@
-endif
-
-$(LINUX_DIR)/vmlinux: $(STAMP_DIR)/.linux-compile
-	$(MAKE) -C $(LINUX_DIR) CROSS_COMPILE="$(KERNEL_CROSS)" ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) $(MAKE_TRACE)
-
-$(LINUX_KERNEL): $(LINUX_DIR)/vmlinux
-	$(TARGET_CROSS)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S $< $@ $(MAKE_TRACE)
-	touch -c $(LINUX_KERNEL)
-
-$(LINUX_DIR)/.modules_done:
-	rm -rf $(LINUX_BUILD_DIR)/modules
-	$(MAKE) -C "$(LINUX_DIR)" CROSS_COMPILE="$(KERNEL_CROSS)" ARCH=$(LINUX_KARCH) PATH="$(TARGET_PATH)" modules $(MAKE_TRACE)
-	$(MAKE) -C "$(LINUX_DIR)" CROSS_COMPILE="$(KERNEL_CROSS)" DEPMOD=true INSTALL_MOD_PATH=$(LINUX_BUILD_DIR)/modules modules_install $(MAKE_TRACE)
-	touch $(LINUX_DIR)/.modules_done
-
-$(STAMP_DIR)/.linux-compile:
-	@$(MAKE) $(LINUX_DIR)/.modules_done $(TARGETS) $(KERNEL_IPKG) $(MAKE_TRACE)
-	ln -sf $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION) $(BUILD_DIR)/linux $(MAKE_TRACE)
-	@$(TRACE) target/linux/package-compile
-	$(MAKE) -C $(TOPDIR)/target/linux/package \
-		$(KPKG_MAKEOPTS) \
-		compile
-	touch $@
-
-.PHONY: pkg-install
-pkg-install:
-	@mkdir -p $(TARGET_MODULES_DIR)
-	@rm -rf $(LINUX_BUILD_DIR)/root*
-	@cp -fpR $(BUILD_DIR)/root $(LINUX_BUILD_DIR)/
-	echo -e 'dest root /\noption offline_root $(LINUX_BUILD_DIR)/root' > $(LINUX_BUILD_DIR)/ipkg.conf
-	$(MAKE) -C $(TOPDIR)/target/linux/package \
-		$(KPKG_MAKEOPTS) \
-		install
-	@{ [ "$(INSTALL_TARGETS)" != "" ] && $(IPKG_KERNEL) install $(INSTALL_TARGETS) || true; } $(MAKE_TRACE) 
-
-$(KERNEL_IPKG):
-	rm -rf $(KERNEL_IDIR)
-	mkdir -p $(KERNEL_IDIR)/etc
-	$(SCRIPT_DIR)/make-ipkg-dir.sh $(KERNEL_IDIR) ../control/kernel.control $(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE) $(ARCH)
-	if [ -f ./config/$(BOARD).modules ]; then \
-		cp ./config/$(BOARD).modules $(KERNEL_IDIR)/etc/modules; \
-	fi
-	$(IPKG_BUILD) $(KERNEL_IDIR) $(LINUX_BUILD_DIR) $(MAKE_TRACE)
-
-source: $(DL_DIR)/$(LINUX_SOURCE)
-prepare: 
-	@mkdir -p $(STAMP_DIR) $(PACKAGE_DIR)
-	@$(MAKE) $(LINUX_DIR)/.configured $(MAKE_TRACE)
-
-compile: prepare $(STAMP_DIR)/.linux-compile
-
-install: compile
-	@$(TRACE) target/linux/package-install
-	$(MAKE) $(KPKG_MAKEOPTS) pkg-install $(MAKE_TRACE)
-	$(MAKE) $(KPKG_MAKEOPTS) $(LINUX_KERNEL) $(MAKE_TRACE)
-
-mostlyclean:
-	rm -f $(STAMP_DIR)/.linux-compile
-	rm -f $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION)/.modules_done
-	rm -f $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION)/.drivers-unpacked
-	$(MAKE) -C $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION) clean $(MAKE_TRACE)
-	rm -f $(LINUX_KERNEL)
-
-rebuild:
-	-$(MAKE) mostlyclean
-	if [ -f $(LINUX_KERNEL) ]; then \
-		$(MAKE) clean $(MAKE_TRACE); \
-	fi
-	$(MAKE) compile $(MAKE_TRACE)
-
-clean:
-	rm -f $(STAMP_DIR)/.linux-compile
-	rm -rf $(LINUX_BUILD_DIR)
-	rm -f $(TARGETS)
-
-package/%:
-	$(MAKE) -C $(TOPDIR)/target/linux/package \
-		$(KPKG_MAKEOPTS) \
-		$(patsubst package/%,%,$@)
diff --git a/openwrt/target/linux/netfilter.mk b/openwrt/target/linux/netfilter.mk
deleted file mode 100644
index 0d44df2fc9..0000000000
--- a/openwrt/target/linux/netfilter.mk
+++ /dev/null
@@ -1,113 +0,0 @@
-# $Id: netfilter.mk 2411 2005-11-11 03:41:43Z nico $
-
-ifeq ($(NF_2_6),1)
-P_V4:=ipv4/netfilter/
-P_XT:=netfilter/
-else
-P_V4:=
-P_XT:=
-endif
-
-IPT_CONNTRACK-m :=
-IPT_CONNTRACK-$(CONFIG_IP_NF_MATCH_CONNMARK) += $(P_V4)ipt_connmark
-IPT_CONNTRACK-$(CONFIG_IP_NF_TARGET_CONNMARK) += $(P_V4)ipt_CONNMARK
-IPT_CONNTRACK-$(CONFIG_IP_NF_MATCH_CONNTRACK) += $(P_V4)ipt_conntrack
-IPT_CONNTRACK-$(CONFIG_IP_NF_MATCH_HELPER) += $(P_V4)ipt_helper
-IPT_CONNTRACK-$(CONFIG_IP_NF_MATCH_STATE) += $(P_V4)ipt_state
-IPT_CONNTRACK-$(CONFIG_NETFILTER_XT_MATCH_CONNTRACK) += $(P_XT)xt_conntrack
-IPT_CONNTRACK-$(CONFIG_NETFILTER_XT_MATCH_HELPER) += $(P_XT)xt_helper
-IPT_CONNTRACK-$(CONFIG_NETFILTER_XT_MATCH_STATE) += $(P_XT)xt_state
-
-
-IPT_EXTRA-m :=
-IPT_EXTRA-$(CONFIG_IP_NF_MATCH_CONDITION) += $(P_V4)ipt_condition
-IPT_EXTRA-$(CONFIG_IP_NF_MATCH_CONNBYTES) += $(P_V4)ipt_connbytes
-IPT_EXTRA-$(CONFIG_NETFILTER_XT_MATCH_CONNBYTES) += $(P_XT)xt_connbytes
-IPT_EXTRA-$(CONFIG_IP_NF_MATCH_LIMIT) += $(P_V4)ipt_limit
-IPT_EXTRA-$(CONFIG_NETFILTER_XT_MATCH_LIMIT) += $(P_XT)xt_limit
-IPT_EXTRA-$(CONFIG_IP_NF_TARGET_LOG) += $(P_V4)ipt_LOG
-IPT_EXTRA-$(CONFIG_IP_NF_MATCH_MULTIPORT) += $(P_V4)ipt_multiport
-IPT_EXTRA-$(CONFIG_IP_NF_MATCH_OWNER) += $(P_V4)ipt_owner
-IPT_EXTRA-$(CONFIG_IP_NF_MATCH_PHYSDEV) += $(P_V4)ipt_physdev
-IPT_EXTRA-$(CONFIG_IP_NF_MATCH_PKTTYPE) += $(P_V4)ipt_pkttype
-IPT_EXTRA-$(CONFIG_NETFILTER_XT_MATCH_PKTTYPE) += $(P_XT)xt_pkttype
-IPT_EXTRA-$(CONFIG_IP_NF_MATCH_QUOTA) += $(P_V4)ipt_quota
-IPT_EXTRA-$(CONFIG_IP_NF_MATCH_RECENT) += $(P_V4)ipt_recent
-IPT_EXTRA-$(CONFIG_IP_NF_TARGET_REJECT) += $(P_V4)ipt_REJECT
-IPT_EXTRA-$(CONFIG_IP_NF_MATCH_STRING) += $(P_V4)ipt_string
-IPT_EXTRA-$(CONFIG_NETFILTER_XT_MATCH_STRING) += $(P_XT)xt_string
-
-IPT_FILTER-m :=
-IPT_FILTER-$(CONFIG_IP_NF_MATCH_IPP2P) += $(P_V4)ipt_ipp2p
-IPT_FILTER-$(CONFIG_IP_NF_MATCH_LAYER7) += $(P_V4)ipt_layer7
-
-IPT_IMQ-m :=
-IPT_IMQ-$(CONFIG_IP_NF_TARGET_IMQ) += $(P_V4)ipt_IMQ
-
-IPT_IPOPT-m :=
-IPT_IPOPT-$(CONFIG_IP_NF_MATCH_DSCP) += $(P_V4)ipt_dscp
-IPT_IPOPT-$(CONFIG_IP_NF_TARGET_DSCP) += $(P_V4)ipt_DSCP
-IPT_IPOPT-$(CONFIG_IP_NF_MATCH_ECN) += $(P_V4)ipt_ecn
-IPT_IPOPT-$(CONFIG_IP_NF_TARGET_ECN) += $(P_V4)ipt_ECN
-IPT_IPOPT-$(CONFIG_IP_NF_MATCH_LENGTH) += $(P_V4)ipt_length
-IPT_IPOPT-$(CONFIG_NETFILTER_XT_MATCH_LENGTH) += $(P_XT)xt_length
-IPT_IPOPT-$(CONFIG_IP_NF_MATCH_MAC) += $(P_V4)ipt_mac
-IPT_IPOPT-$(CONFIG_NETFILTER_XT_MATCH_MAC) += $(P_XT)xt_mac
-IPT_IPOPT-$(CONFIG_IP_NF_MATCH_MARK) += $(P_V4)ipt_mark
-IPT_IPOPT-$(CONFIG_NETFILTER_XT_MATCH_MARK) += $(P_XT)xt_mark
-IPT_IPOPT-$(CONFIG_IP_NF_TARGET_MARK) += $(P_V4)ipt_MARK
-IPT_IPOPT-$(CONFIG_NETFILTER_XT_TARGET_MARK) += $(P_XT)xt_MARK
-IPT_IPOPT-$(CONFIG_IP_NF_MATCH_TCPMSS) += $(P_V4)ipt_tcpmss
-IPT_IPOPT-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += $(P_XT)xt_tcpmss
-IPT_IPOPT-$(CONFIG_IP_NF_TARGET_TCPMSS) += $(P_V4)ipt_TCPMSS
-IPT_IPOPT-$(CONFIG_IP_NF_MATCH_TOS) += $(P_V4)ipt_tos
-IPT_IPOPT-$(CONFIG_IP_NF_MATCH_TIME) += $(P_V4)ipt_time
-IPT_IPOPT-$(CONFIG_IP_NF_TARGET_TOS) += $(P_V4)ipt_TOS
-IPT_IPOPT-$(CONFIG_IP_NF_MATCH_TTL) += $(P_V4)ipt_ttl
-IPT_IPOPT-$(CONFIG_IP_NF_TARGET_TTL) += $(P_V4)ipt_TTL
-IPT_IPOPT-$(CONFIG_IP_NF_MATCH_UNCLEAN) += $(P_V4)ipt_unclean
-
-IPT_IPSEC-m :=
-IPT_IPSEC-$(CONFIG_IP_NF_MATCH_AH_ESP) += $(P_V4)ipt_ah $(P_V4)ipt_esp
-
-IPT_NAT-m :=
-IPT_NAT-$(CONFIG_IP_NF_NAT) += $(P_V4)ipt_SNAT $(P_V4)ipt_DNAT
-IPT_NAT-$(CONFIG_IP_NF_TARGET_MASQUERADE) += $(P_V4)ipt_MASQUERADE
-IPT_NAT-$(CONFIG_IP_NF_TARGET_MIRROR) += $(P_V4)ipt_MIRROR
-IPT_NAT-$(CONFIG_IP_NF_TARGET_REDIRECT) += $(P_V4)ipt_REDIRECT
-
-IPT_NAT_EXTRA-m := 
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_AMANDA) += $(P_V4)ip_conntrack_amanda
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_CT_PROTO_GRE) += $(P_V4)ip_conntrack_proto_gre
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_NAT_PROTO_GRE) += $(P_V4)ip_nat_proto_gre
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_H323) += $(P_V4)ip_conntrack_h323
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_NAT_H323) += $(P_V4)ip_nat_h323
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_MMS) += $(P_V4)ip_conntrack_mms
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_NAT_MMS) += $(P_V4)ip_nat_mms
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_RTSP) += $(P_V4)ip_conntrack_rtsp
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_NAT_RTSP) += $(P_V4)ip_nat_rtsp
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_PPTP) += $(P_V4)ip_conntrack_pptp
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_SIP) += $(P_V4)ip_conntrack_sip
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_NAT_PPTP) += $(P_V4)ip_nat_pptp
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_NAT_SIP) += $(P_V4)ip_nat_sip
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_NAT_SNMP_BASIC) += $(P_V4)ip_nat_snmp_basic
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_SIP) += $(P_V4)ip_conntrack_sip
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_NAT_SIP) += $(P_V4)ip_nat_sip
-IPT_NAT_EXTRA-$(CONFIG_IP_NF_TFTP) += $(P_V4)ip_conntrack_tftp
-
-IPT_QUEUE-m :=
-IPT_QUEUE-$(CONFIG_IP_NF_QUEUE) += $(P_V4)ip_queue
-
-IPT_ULOG-m :=
-IPT_ULOG-$(CONFIG_IP_NF_TARGET_ULOG) += $(P_V4)ipt_ULOG
-
-IPT_BUILTIN := $(P_V4)ipt_standard
-IPT_BUILTIN += $(P_V4)ipt_icmp $(P_V4)ipt_tcp $(P_V4)ipt_udp
-IPT_BUILTIN += $(IPT_CONNTRACK-y)
-IPT_BUILTIN += $(IPT_EXTRA-y)
-IPT_BUILTIN += $(IPT_FILTER-y)
-IPT_BUILTIN += $(IPT_IMQ-y)
-IPT_BUILTIN += $(IPT_IPOPT-y)
-IPT_BUILTIN += $(IPT_IPSEC-y)
-IPT_BUILTIN += $(IPT_NAT-y)
-IPT_BUILTIN += $(IPT_ULOG-y)
diff --git a/openwrt/target/linux/package/Config.in b/openwrt/target/linux/package/Config.in
deleted file mode 100644
index 4d97a57aaa..0000000000
--- a/openwrt/target/linux/package/Config.in
+++ /dev/null
@@ -1 +0,0 @@
-source "target/linux/package/*/Config.in"
diff --git a/openwrt/target/linux/package/Makefile b/openwrt/target/linux/package/Makefile
deleted file mode 100644
index 150dee39dd..0000000000
--- a/openwrt/target/linux/package/Makefile
+++ /dev/null
@@ -1,62 +0,0 @@
-# Main makefile for the packages
-include $(TOPDIR)/rules.mk
-include ../rules.mk
-
-package-y += base-files
-package-$(BR2_PACKAGE_KMOD_ALSA) += alsa
-package-$(BR2_PACKAGE_KMOD_FUSE) += fuse
-package-$(BR2_PACKAGE_KMOD_HOSTAP) += hostap
-package-$(BR2_PACKAGE_KMOD_MADWIFI) += madwifi
-package-$(BR2_PACKAGE_KMOD_MADWIFI_OLD) += madwifi-old
-package-$(BR2_PACKAGE_KMOD_MINI_FO) += mini_fo
-package-$(BR2_PACKAGE_KMOD_OPENSWAN) += openswan
-package-$(BR2_PACKAGE_KMOD_SHFS) += shfs
-package-$(BR2_PACKAGE_KMOD_SPCA5XX) += spca5xx
-package-$(BR2_PACKAGE_KMOD_SWITCH) += switch
-package-$(BR2_PACKAGE_KMOD_UEAGLE_ATM) += ueagle-atm
-package-$(BR2_PACKAGE_KMOD_DIAG) += diag
-package-$(BR2_PACKAGE_KMOD_WLCOMPAT) += wlcompat
-package-$(BR2_PACKAGE_KMOD_ZD1211) += zd1211
-
-wlcompat-compile: base-files-compile
-
-all: compile install
-clean: $(patsubst %,%-clean,$(package-) $(package-y) $(package-m))
-prepare: $(patsubst %,%-prepare,$(package-y) $(package-m))
-compile: $(patsubst %,%-compile,$(package-y) $(package-m))
-install: $(patsubst %,%-install,$(package-y))
-
-KPKG_MAKEOPTS += BUILD_DIR="$(LINUX_BUILD_DIR)"
-
-%-prepare:
-	@$(START_TRACE) "target/linux/package/$(patsubst %-prepare,%,$@)/prepare: "
-	$(MAKE) -C $(patsubst %-prepare,%,$@) \
-		$(KPKG_MAKEOPTS) \
-		prepare
-	@$(CMD_TRACE) " done"
-	@$(END_TRACE)
-
-%-compile:
-	@$(START_TRACE) "target/linux/package/$(patsubst %-compile,%,$@)-compile: "
-	$(MAKE) -C $(patsubst %-compile,%,$@) \
-		$(KPKG_MAKEOPTS) \
-		compile
-	@$(CMD_TRACE) " done"
-	@$(END_TRACE)
-
-%-install:
-	@$(START_TRACE) "target/linux/package/$(patsubst %-install,%,$@)-install: "
-	$(MAKE) -C $(patsubst %-install,%,$@) \
-		$(KPKG_MAKEOPTS) \
-		install
-	@$(CMD_TRACE) " done"
-	@$(END_TRACE)
-
-%-clean:
-	@$(START_TRACE) "target/linux/package/$(patsubst %-clean,%,$@)-clean: "
-	@$(MAKE) -C $(patsubst %-clean,%,$@) \
-		$(KPKG_MAKEOPTS) \
-		clean
-	@$(CMD_TRACE) " done"
-	@$(END_TRACE)
-
diff --git a/openwrt/target/linux/package/alsa/Config.in b/openwrt/target/linux/package/alsa/Config.in
deleted file mode 100644
index df4da0b7d1..0000000000
--- a/openwrt/target/linux/package/alsa/Config.in
+++ /dev/null
@@ -1,9 +0,0 @@
-config BR2_PACKAGE_KMOD_ALSA
-	prompt "kmod-alsa......................... Alsa Sound Drivers"
-	tristate
-    depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_X86 || BR2_LINUX_2_6_BRCM
-	depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-	select BR2_PACKAGE_KMOD_SOUNDCORE
-	default m if CONFIG_DEVEL
-	help
-	  Alsa Drivers for USB Soundcards
diff --git a/openwrt/target/linux/package/alsa/Makefile b/openwrt/target/linux/package/alsa/Makefile
deleted file mode 100644
index 665fc00451..0000000000
--- a/openwrt/target/linux/package/alsa/Makefile
+++ /dev/null
@@ -1,60 +0,0 @@
-# $Id$
-
-include $(TOPDIR)/rules.mk
-include ../../rules.mk
-
-PKG_NAME:=alsa-driver
-PKG_VERSION:=1.0.11rc4
-PKG_RELEASE:=1
-PKG_MD5SUM:=8e5794026082a964b09b46f9d881e6ec
-
-PKG_SOURCE_URL:=ftp://ftp.alsa-project.org/pub/driver/
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_CAT:=bzcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(TOPDIR)/package/rules.mk
-
-ifeq ($(LINUX_KARCH),i386)
-KERNEL_C_INCS:= -I$(LINUX_DIR)/include/asm-i386/mach-generic -I$(LINUX_DIR)/include/asm-i386/mach-default
-KERNEL_C_OPTS:= -Os -mpreferred-stack-boundary=2 -march=i486 -fno-unit-at-a-time
-endif
-ifeq ($(LINUX_KARCH),mips)
-KERNEL_C_INCS:= -I$(LINUX_DIR)/include/asm-mips/mach-generic
-KERNEL_C_OPTS:= -Os -G 0 -mno-abicalls -fno-pic -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
-endif
-
-$(eval $(call PKG_template,KMOD_ALSA,kmod-alsa,$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-$(PKG_BUILD_DIR)/.configured:
-	(cd $(PKG_BUILD_DIR); \
-		CFLAGS="$(KERNEL_C_INCS)" \
-		./configure \
-		--with-build=$(LINUX_DIR) \
-		--with-kernel=$(LINUX_DIR) \
-		--with-cross=$(KERNEL_CROSS) \
-		--with-redhat=no \
-		--with-suse=no \
-		--with-oss=yes \
-		--with-isapnp=no \
-		--with-sequencer=no \
-		--with-cards=usb-audio \
-	);
-	touch $@
-
-$(PKG_BUILD_DIR)/.built:
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		c_opts="$(KERNEL_C_OPTS)" \
-		all
-	touch $@
-
-$(IPKG_KMOD_ALSA):
-	install -d -m0755 $(IDIR_KMOD_ALSA)/etc/modules.d
-	install -m0644 ./files/alsa.modules $(IDIR_KMOD_ALSA)/etc/modules.d/70-alsa
-	install -d -m0755 $(IDIR_KMOD_ALSA)/lib/modules/$(LINUX_VERSION)
-	install -m0644 $(PKG_BUILD_DIR)/modules/*.$(LINUX_KMOD_SUFFIX) \
-		$(IDIR_KMOD_ALSA)/lib/modules/$(LINUX_VERSION)/
-	$(IPKG_BUILD) $(IDIR_KMOD_ALSA) $(PACKAGE_DIR)
diff --git a/openwrt/target/linux/package/alsa/files/alsa.modules b/openwrt/target/linux/package/alsa/files/alsa.modules
deleted file mode 100644
index 6b16c8c586..0000000000
--- a/openwrt/target/linux/package/alsa/files/alsa.modules
+++ /dev/null
@@ -1,10 +0,0 @@
-snd-page-alloc
-snd
-snd-timer
-snd-pcm
-snd-rawmidi
-snd-usb-lib
-snd-hwdep
-snd-usb-audio
-snd-mixer-oss
-snd-pcm-oss
diff --git a/openwrt/target/linux/package/alsa/ipkg/kmod-alsa.control b/openwrt/target/linux/package/alsa/ipkg/kmod-alsa.control
deleted file mode 100644
index 5641785d84..0000000000
--- a/openwrt/target/linux/package/alsa/ipkg/kmod-alsa.control
+++ /dev/null
@@ -1,5 +0,0 @@
-Package: kmod-alsa
-Priority: optional
-Section: sys
-Depends: kmod-usb-audio
-Description: Alsa Drivers for USB Soundcards
diff --git a/openwrt/target/linux/package/alsa/patches/100-compile_fix.patch b/openwrt/target/linux/package/alsa/patches/100-compile_fix.patch
deleted file mode 100644
index 2e2a3df79a..0000000000
--- a/openwrt/target/linux/package/alsa/patches/100-compile_fix.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-diff -urN alsa.old/include/adriver.h alsa.dev/include/adriver.h
---- alsa.old/include/adriver.h	2006-04-19 08:24:30.000000000 +0200
-+++ alsa.dev/include/adriver.h	2006-05-31 17:24:49.000000000 +0200
-@@ -451,7 +451,7 @@
- #endif /* < 2.6.0 */
- 
- /* workarounds for USB API */
--#if defined(SND_NEED_USB_WRAPPER) && (defined(CONFIG_USB) || defined(CONFIG_USB_MODULE))
-+#if 1
- 
- #include <linux/usb.h>
- 
-@@ -1174,4 +1174,5 @@
-  */
- #define OPL3_HW_OPL3_PC98	0x0305	/* PC9800 */
- 
-+#undef info /* used in several structs */
- #endif /* __SOUND_LOCAL_DRIVER_H */
diff --git a/openwrt/target/linux/package/base-files/Makefile b/openwrt/target/linux/package/base-files/Makefile
deleted file mode 100644
index cf72eabdac..0000000000
--- a/openwrt/target/linux/package/base-files/Makefile
+++ /dev/null
@@ -1,66 +0,0 @@
-# $Id$
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME := base-files-arch
-PKG_RELEASE := 2
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(TOPDIR)/package/rules.mk
-
-IDIR_OPENWRT:=$(PKG_BUILD_DIR)/ipkg
-IPKG_OPENWRT:=$(PACKAGE_DIR)/base-files-$(BOARD)-$(KERNEL)_$(PKG_RELEASE)_$(ARCH).ipk
-
-$(PKG_BUILD_DIR)/.prepared:
-	mkdir -p $(PKG_BUILD_DIR)
-	touch $@
-
-ifeq ($(BOARD),ar7)
-$(PKG_BUILD_DIR)/adam2patcher: src/adam2patcher.c
-	$(TARGET_CC) -o $@ $<
-
-$(PKG_BUILD_DIR)/.built: $(PKG_BUILD_DIR)/adam2patcher
-
-$(IDIR_OPENWRT)/sbin/adam2patcher: $(PKG_BUILD_DIR)/adam2patcher
-	mkdir -p $(IDIR_OPENWRT)/sbin
-	$(CP) $(PKG_BUILD_DIR)/adam2patcher $(IDIR_OPENWRT)/sbin
-
-$(IPKG_OPENWRT): $(IDIR_OPENWRT)/sbin/adam2patcher
-endif
-
-ifeq ($(BOARD),brcm)
-$(PKG_BUILD_DIR)/jffs2root: src/jffs2root.c
-	$(TARGET_CC) -o $@ $<
-
-$(PKG_BUILD_DIR)/.built: $(PKG_BUILD_DIR)/jffs2root
-
-$(IDIR_OPENWRT)/sbin/jffs2root: $(PKG_BUILD_DIR)/jffs2root
-	mkdir -p $(IDIR_OPENWRT)/sbin
-	$(CP) $(PKG_BUILD_DIR)/jffs2root $(IDIR_OPENWRT)/sbin
-
-$(IPKG_OPENWRT): $(IDIR_OPENWRT)/sbin/jffs2root
-endif
-
-$(PKG_BUILD_DIR)/.built:
-	touch $@
-	
-$(IDIR_OPENWRT):
-	$(SCRIPT_DIR)/make-ipkg-dir.sh $(IDIR_OPENWRT) ipkg/base-files-arch.control $(PKG_RELEASE) $(ARCH)
-	$(SED) s,base-files-arch,base-files-$(BOARD)-$(KERNEL),g $(IDIR_OPENWRT)/CONTROL/control
-
-$(IPKG_OPENWRT): $(IDIR_OPENWRT)
-	[ -d files/$(BOARD)-$(KERNEL) ] && $(CP) -fpR files/$(BOARD)-$(KERNEL)/* $(IDIR_OPENWRT)/
-	find $(IDIR_OPENWRT) -name CVS | xargs rm -rf
-	find $(IDIR_OPENWRT) -name .svn | xargs rm -rf
-	$(RSTRIP) $(IDIR_OPENWRT)
-	$(IPKG_BUILD) $(IDIR_OPENWRT) $(PACKAGE_DIR)
-
-install-targets: compile openwrt-install
-
-openwrt-install:
-	$(IPKG) install $(IPKG_OPENWRT)
-
-compile-targets: install-dev $(IPKG_OPENWRT)
-install-dev:
-	mkdir -p $(STAGING_DIR)/usr/include
-	$(CP) ./include/[a-z]* $(STAGING_DIR)/usr/include/
diff --git a/openwrt/target/linux/package/base-files/files/ar7-2.4/etc/config/network b/openwrt/target/linux/package/base-files/files/ar7-2.4/etc/config/network
deleted file mode 100644
index 353538bf49..0000000000
--- a/openwrt/target/linux/package/base-files/files/ar7-2.4/etc/config/network
+++ /dev/null
@@ -1,27 +0,0 @@
-# Network configuration file
-# Uncomment the following statements to change the network configuration
-
-## LAN configuration
-lan_ifname="eth0"
-lan_proto="static"
-lan_ipaddr="192.168.1.1"
-lan_netmask="255.255.255.0"
-# lan_gateway=""
-# lan_dns=""
-
-## WAN configuration
-# wan_proto=pppoe
-wan_ifname=ppp0
-wan_device=nas0
-atm_vpi=8
-atm_vci=35
-# ppp_username=my_username
-# ppp_passwd=my_passwd
-
-## WAN configuration (pppoe)
-pppoe_atm=1
-ppp_mtu=1492
-
-## WAN configuration (pppoa)
-# ppp_mtu=1500
-
diff --git a/openwrt/target/linux/package/base-files/files/ar7-2.4/etc/init.d/S00adam2 b/openwrt/target/linux/package/base-files/files/ar7-2.4/etc/init.d/S00adam2
deleted file mode 100755
index 0ca4c01453..0000000000
--- a/openwrt/target/linux/package/base-files/files/ar7-2.4/etc/init.d/S00adam2
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-# ADAM2 patcher for Netgear DG834 and compatible
-MD5="$(md5sum /dev/mtdblock/0  | awk '{print $1}')"
-[ "$MD5" = "0530bfdf00ec155f4182afd70da028c1" ] && {
-	mtd unlock adam2
-	/sbin/adam2patcher /dev/mtdblock/0
-}
-rm -f /etc/init.d/S00adam2 /sbin/adam2patcher >&- 2>&-
diff --git a/openwrt/target/linux/package/base-files/files/aruba-2.6/etc/config/network b/openwrt/target/linux/package/base-files/files/aruba-2.6/etc/config/network
deleted file mode 100644
index f60332cd8c..0000000000
--- a/openwrt/target/linux/package/base-files/files/aruba-2.6/etc/config/network
+++ /dev/null
@@ -1,5 +0,0 @@
-# Network configuration file
-
-## LAN configuration
-lan_ifname="eth0"
-lan_proto="dhcp"
diff --git a/openwrt/target/linux/package/base-files/files/aruba-2.6/etc/init.d/S00aruba b/openwrt/target/linux/package/base-files/files/aruba-2.6/etc/init.d/S00aruba
deleted file mode 100755
index 9836de423b..0000000000
--- a/openwrt/target/linux/package/base-files/files/aruba-2.6/etc/init.d/S00aruba
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-mount none /proc -t proc
-mount_root failsafe
-mount -o remount,rw /dev/root /
diff --git a/openwrt/target/linux/package/base-files/files/aruba-2.6/init b/openwrt/target/linux/package/base-files/files/aruba-2.6/init
deleted file mode 100755
index 8ca48a04c1..0000000000
--- a/openwrt/target/linux/package/base-files/files/aruba-2.6/init
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/ash
-mount none /dev -t devfs
-exec /bin/busybox init
diff --git a/openwrt/target/linux/package/base-files/files/au1000-2.6/etc/config/network b/openwrt/target/linux/package/base-files/files/au1000-2.6/etc/config/network
deleted file mode 100644
index 2cc9e26717..0000000000
--- a/openwrt/target/linux/package/base-files/files/au1000-2.6/etc/config/network
+++ /dev/null
@@ -1,12 +0,0 @@
-# Network configuration file
-
-## LAN configuration
-lan_ifname="br0"
-lan_ifnames="eth0 ath0"
-lan_proto="static"
-lan_ipaddr="192.168.1.1"
-lan_netmask="255.255.255.0"
-
-## WAN configuration
-wan_ifname=""
-wan_proto="none"
diff --git a/openwrt/target/linux/package/base-files/files/au1000-2.6/sbin/mount_root b/openwrt/target/linux/package/base-files/files/au1000-2.6/sbin/mount_root
deleted file mode 100755
index 5dd1b0c562..0000000000
--- a/openwrt/target/linux/package/base-files/files/au1000-2.6/sbin/mount_root
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/sh
-size=$(awk '/Mem:/ {l=5242880;print((s=$2/2)<l)?$2-l:s}' /proc/meminfo)
-mount none /tmp -t tmpfs -o size=$size
-
-if [ "$1" != "failsafe" ]; then 
-	mtd unlock filesystem
-	mount | grep jffs2 >&-
-	if [ $? = 0 ] ; then
-		if [ $(cat /proc/mtd | wc -l) = 6 ]; then
-			mtd erase filesystem
-			jffs2root --move
-		else
-			mount -o remount,rw /dev/root /
-		fi
-	else
-		. /bin/firstboot
-	fi
-fi
-
-mount none /tmp -t tmpfs -o remount,nosuid,nodev,mode=1777
-mkdir -p /dev/pts
-mount none /dev/pts -t devpts
-mount -t sysfs none /sys 2>&-
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/hotplug.d/net/09-net b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/hotplug.d/net/09-net
deleted file mode 100644
index 9dd77963ba..0000000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/hotplug.d/net/09-net
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-setup_wl()
-{
-	[ -f /proc/net/wl0 ] && {
-		lsmod | grep wlcompat >&- || insmod wlcompat
-	}
-	iwconfig "$INTERFACE" 2>&- | grep -v 'no wireless' >&- && {
-		/sbin/wifi
-	}
-}
-setup_eth()
-{
-	[ -d /proc/switch ] || {
-		insmod switch-core
-		insmod switch-robo || insmod switch-adm
-	}
-	if="$(echo "$INTERFACE" | sed s,eth,et,)"
-	ifconfig "$INTERFACE" up 2>&- >&-
-	[ -d "/proc/switch/$INTERFACE" ] || return 0
-	echo "1" > "/proc/switch/$INTERFACE/reset"
-	echo "1" > "/proc/switch/$INTERFACE/enable_vlan"
-	for vlan in $(seq 0 15); do
-		eval "hwname=\"\${vlan${vlan}hwname}\""
-		[ "$hwname" = "$if" ] && {
-			eval "vports=\"\${vlan${vlan}ports}\""
-			[ -n "$vports" ] && echo "$vports" > "/proc/switch/$INTERFACE/vlan/$vlan/ports"
-			$DEBUG vconfig add "$INTERFACE" "$vlan"
-		}
-	done
-}
-
-do_register()
-{
-	case "${INTERFACE%%[0-9]*}" in
-		eth) setup_eth;;
-		wl) setup_wl;;
-	esac
-}
-
-
-case "$ACTION" in
-	add|register) do_register;;
-esac
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram
deleted file mode 100755
index 4de124735b..0000000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/bin/sh
-# NVRAM setup
-#
-# This file handles the NVRAM quirks of various hardware.
-
-# WGT634u
-grep 'mtd0: 00060000' /proc/mtd 2>&- >&- && exit
-
-alias debug=${DEBUG:-:}
-
-nvram_default() {
-	[ -z "$(nvram get $1)" ] && nvram set "$1=$2"
-}
-
-nvram_set() { # for the linksys fixup part
-	[ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || {
-		COMMIT=1
-		/usr/sbin/nvram set "$1=$2"
-	}
-}
-
-# work around braindead CFE defaults in linksys routers
-boardtype=$(nvram get boardtype)
-boardnum=$(nvram get boardnum)
-boardflags=$(($(nvram get boardflags)))
-adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
-
-case "$(( $boardtype ))" in
-	"1800") #0x708
-		if [ "$adm_switch" = 0 ]; then
-			nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
-			[ "$COMMIT" = 1 ] && {
-				nvram_set sdram_config 0x0062
-				nvram_set clkfreq 216
-				nvram_set sdram_ncdl 0x0
-				nvram_set pa0itssit 62
-				nvram_set pa0b0 0x15eb
-				nvram_set pa0b1 0xfa82
-				nvram_set pa0b2 0xfe66
-				nvram_set pa0maxpwr 0x4e
-			}
-		fi
-	;;
-	"1127") #0x467
-		nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
-		[ "$COMMIT" = 1 ] && {
-			nvram_set sdram_config 0x0062
-			nvram_set sdram_ncdl 0x0
-			nvram_set pa0itssit 62
-			nvram_set pa0b0 0x168b
-			nvram_set pa0b1 0xfabf
-			nvram_set pa0b2 0xfeaf
-			nvram_set pa0maxpwr 0x4e
-		}
-	;;
-esac
-[ "$COMMIT" = "1" ] && nvram commit
-
-# hack for some motorola routers
-nvram unset wl0gpio0
-
-[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
-	# if default wifi mac, set two higher than the lan mac
-	nvram set il0macaddr=$(nvram get et0macaddr|
-	awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
-}
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
deleted file mode 100755
index 6a626f54a5..0000000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-[ -e /etc/config/network ] && exit 0
-
-mkdir -p /etc/config
-
-(
-	if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
-		# WGT634u
-		echo boardtype=wgt634u
-	else
-		strings /dev/mtdblock/3
-	fi
-) | awk '
-function p(name) {
-	if (c[name] != "") print name "=\"" c[name] "\""
-}
-
-BEGIN {
-	FS="="
-	c["lan_ifname"]="br0"
-	c["lan_ifnames"]="vlan0 eth1"
-	c["wan_proto"]="none"
-	c["wan_ifname"]="vlan1"
-	c["vlan0ports"]="1 2 3 4 5*"
-	c["vlan1ports"]="0 5"
-}
-
-($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
-	nvram[$1] = $2
-}
-
-END {
-	# v1 hardware
-	if (nvram["boardtype"] == "bcm94710dev") {
-		# Linksys WRT54G v1.x
-		if (nvram["boardnum"] == "42") {
-			c["vlan0ports"]=""
-			c["vlan1ports"]=""
-			c["lan_ifnames"]="vlan2 eth2"
-		}
-
-		# Asus WL-500g
-		if (nvram["boardnum"] == "asusX") {
-			c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
-			# wan_ifname=eth1
-		}
-	}
-	if (nvram["boardtype"] == "wgt634u") {
-		c["vlan0ports"] = "0 1 2 3 5*"
-		c["vlan1ports"] = "4 5"
-		c["lan_ifnames"] = "vlan0 ath0"
-	}
-	if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
-		c["vlan0ports"] = "0 1 2 3 5*"
-		c["vlan1ports"] = "4 5"
-	}
-
-	# WAP54G
-	if ((nvram["boardnum"] == "2") || \
-		(nvram["boardnum"] == "1024")) {
-		c["lan_ifnames"]="eth0 eth1"
-		c["wan_ifname"]=""
-	}
-
-	print "#### VLAN configuration "
-	print "vlan0hwname=et0"
-	print "vlan1hwname=et0"
-	p("vlan0ports")
-	p("vlan1ports")
-	print ""
-	print ""
-	
-	print "#### LAN configuration"
-	print "lan_proto=\"static\""
-	p("lan_ifname")
-	p("lan_ifnames")
-	print "lan_ipaddr=\"192.168.1.1\""
-	print "lan_netmask=\"255.255.255.0\""
-	print "# lan_dns=\"192.168.1.1\""
-	print "# lan_gateway=\"192.168.1.1\""
-
-	print ""
-	print ""
-
-	print "#### WAN configuration"
-	print "# wan_proto: WAN protocol, available protocols:"
-	print "#   none: disable"
-	print "#   dhcp: DHCP"
-	print "#   static: Static IP"
-	print "#   pppoe: PPP over Ethernet"
-	print "#   pptp: Point-to-Point tunneling Protocol"
-	print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
-	print ""
-	print "wan_proto=dhcp"
-	p("wan_ifname")
-	print "wan_device=\"" c["wan_ifname"] "\""
-	print "# wan_ipaddr=\"192.168.0.2\""
-	print "# wan_netmask=\"255.255.255.0\""
-	print "# wan_gateway=\"192.168.0.1\""
-	print "# wan_dns=\"192.168.0.1\""
-	print ""
-	print "## PPP over Ethernet and PPTP"
-	print "# wan_ifname=\"ppp0\""
-	print "# ppp_username=\"my_username\""
-	print "# ppp_passwd=\"my_password\""
-	print "# pptp_server_ip=\"192.168.0.1\""
-}
-' > /etc/config/network
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/hotplug.d/net/09-net b/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/hotplug.d/net/09-net
deleted file mode 100644
index 8bbf604df8..0000000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/hotplug.d/net/09-net
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/sh
-setup_eth()
-{
-	[ -d /proc/switch ] || {
-		insmod switch-core
-		insmod switch-robo || insmod switch-adm
-	}
-	if="$(echo "$INTERFACE" | sed s,eth,et,)"
-	ifconfig "$INTERFACE" up 2>&- >&-
-	[ -d "/proc/switch/$INTERFACE" ] || return 0
-	echo "1" > "/proc/switch/$INTERFACE/reset"
-	echo "1" > "/proc/switch/$INTERFACE/enable_vlan"
-	for vlan in $(seq 0 15); do
-		eval "hwname=\"\${vlan${vlan}hwname}\""
-		[ "$hwname" = "$if" ] && {
-			eval "vports=\"\${vlan${vlan}ports}\""
-			[ -n "$vports" ] && echo "$vports" > "/proc/switch/$INTERFACE/vlan/$vlan/ports"
-			$DEBUG vconfig add "$INTERFACE" "$vlan"
-		}
-	done
-}
-
-do_register()
-{
-	case "${INTERFACE%%[0-9]*}" in
-		eth) setup_eth;;
-	esac
-}
-
-
-case "$ACTION" in
-	add|register) do_register;;
-esac
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig b/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig
deleted file mode 100755
index 6a626f54a5..0000000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-[ -e /etc/config/network ] && exit 0
-
-mkdir -p /etc/config
-
-(
-	if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
-		# WGT634u
-		echo boardtype=wgt634u
-	else
-		strings /dev/mtdblock/3
-	fi
-) | awk '
-function p(name) {
-	if (c[name] != "") print name "=\"" c[name] "\""
-}
-
-BEGIN {
-	FS="="
-	c["lan_ifname"]="br0"
-	c["lan_ifnames"]="vlan0 eth1"
-	c["wan_proto"]="none"
-	c["wan_ifname"]="vlan1"
-	c["vlan0ports"]="1 2 3 4 5*"
-	c["vlan1ports"]="0 5"
-}
-
-($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
-	nvram[$1] = $2
-}
-
-END {
-	# v1 hardware
-	if (nvram["boardtype"] == "bcm94710dev") {
-		# Linksys WRT54G v1.x
-		if (nvram["boardnum"] == "42") {
-			c["vlan0ports"]=""
-			c["vlan1ports"]=""
-			c["lan_ifnames"]="vlan2 eth2"
-		}
-
-		# Asus WL-500g
-		if (nvram["boardnum"] == "asusX") {
-			c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
-			# wan_ifname=eth1
-		}
-	}
-	if (nvram["boardtype"] == "wgt634u") {
-		c["vlan0ports"] = "0 1 2 3 5*"
-		c["vlan1ports"] = "4 5"
-		c["lan_ifnames"] = "vlan0 ath0"
-	}
-	if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
-		c["vlan0ports"] = "0 1 2 3 5*"
-		c["vlan1ports"] = "4 5"
-	}
-
-	# WAP54G
-	if ((nvram["boardnum"] == "2") || \
-		(nvram["boardnum"] == "1024")) {
-		c["lan_ifnames"]="eth0 eth1"
-		c["wan_ifname"]=""
-	}
-
-	print "#### VLAN configuration "
-	print "vlan0hwname=et0"
-	print "vlan1hwname=et0"
-	p("vlan0ports")
-	p("vlan1ports")
-	print ""
-	print ""
-	
-	print "#### LAN configuration"
-	print "lan_proto=\"static\""
-	p("lan_ifname")
-	p("lan_ifnames")
-	print "lan_ipaddr=\"192.168.1.1\""
-	print "lan_netmask=\"255.255.255.0\""
-	print "# lan_dns=\"192.168.1.1\""
-	print "# lan_gateway=\"192.168.1.1\""
-
-	print ""
-	print ""
-
-	print "#### WAN configuration"
-	print "# wan_proto: WAN protocol, available protocols:"
-	print "#   none: disable"
-	print "#   dhcp: DHCP"
-	print "#   static: Static IP"
-	print "#   pppoe: PPP over Ethernet"
-	print "#   pptp: Point-to-Point tunneling Protocol"
-	print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
-	print ""
-	print "wan_proto=dhcp"
-	p("wan_ifname")
-	print "wan_device=\"" c["wan_ifname"] "\""
-	print "# wan_ipaddr=\"192.168.0.2\""
-	print "# wan_netmask=\"255.255.255.0\""
-	print "# wan_gateway=\"192.168.0.1\""
-	print "# wan_dns=\"192.168.0.1\""
-	print ""
-	print "## PPP over Ethernet and PPTP"
-	print "# wan_ifname=\"ppp0\""
-	print "# ppp_username=\"my_username\""
-	print "# ppp_passwd=\"my_password\""
-	print "# pptp_server_ip=\"192.168.0.1\""
-}
-' > /etc/config/network
diff --git a/openwrt/target/linux/package/base-files/files/sibyte-2.6/etc/config/network b/openwrt/target/linux/package/base-files/files/sibyte-2.6/etc/config/network
deleted file mode 100644
index 2cc9e26717..0000000000
--- a/openwrt/target/linux/package/base-files/files/sibyte-2.6/etc/config/network
+++ /dev/null
@@ -1,12 +0,0 @@
-# Network configuration file
-
-## LAN configuration
-lan_ifname="br0"
-lan_ifnames="eth0 ath0"
-lan_proto="static"
-lan_ipaddr="192.168.1.1"
-lan_netmask="255.255.255.0"
-
-## WAN configuration
-wan_ifname=""
-wan_proto="none"
diff --git a/openwrt/target/linux/package/base-files/files/sibyte-2.6/etc/inittab b/openwrt/target/linux/package/base-files/files/sibyte-2.6/etc/inittab
deleted file mode 100644
index 6eef29efba..0000000000
--- a/openwrt/target/linux/package/base-files/files/sibyte-2.6/etc/inittab
+++ /dev/null
@@ -1,3 +0,0 @@
-::sysinit:/etc/init.d/rcS
-duart/0::askfirst:/bin/ash --login
-#tts/1::askfirst:/bin/ash --login
diff --git a/openwrt/target/linux/package/base-files/files/sibyte-2.6/init b/openwrt/target/linux/package/base-files/files/sibyte-2.6/init
deleted file mode 100755
index 1f98589eb6..0000000000
--- a/openwrt/target/linux/package/base-files/files/sibyte-2.6/init
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/ash
-mount none /dev -t devfs
-mount none /proc -t proc
-mount_root failsafe
-mount -o remount,rw /dev/root /
-exec /bin/busybox init
diff --git a/openwrt/target/linux/package/base-files/files/x86-2.4/etc/config/network b/openwrt/target/linux/package/base-files/files/x86-2.4/etc/config/network
deleted file mode 100644
index fd0f557c04..0000000000
--- a/openwrt/target/linux/package/base-files/files/x86-2.4/etc/config/network
+++ /dev/null
@@ -1,12 +0,0 @@
-# Network configuration file
-
-## LAN configuration
-lan_ifname="br0"
-lan_ifnames="eth1 eth2"
-lan_proto="static"
-lan_ipaddr="192.168.1.1"
-lan_netmask="255.255.255.0"
-
-## WAN configuration
-wan_ifname="eth0"
-wan_proto="dhcp"
diff --git a/openwrt/target/linux/package/base-files/files/x86-2.6/etc/config/network b/openwrt/target/linux/package/base-files/files/x86-2.6/etc/config/network
deleted file mode 100644
index fd0f557c04..0000000000
--- a/openwrt/target/linux/package/base-files/files/x86-2.6/etc/config/network
+++ /dev/null
@@ -1,12 +0,0 @@
-# Network configuration file
-
-## LAN configuration
-lan_ifname="br0"
-lan_ifnames="eth1 eth2"
-lan_proto="static"
-lan_ipaddr="192.168.1.1"
-lan_netmask="255.255.255.0"
-
-## WAN configuration
-wan_ifname="eth0"
-wan_proto="dhcp"
diff --git a/openwrt/target/linux/package/base-files/files/xscale-2.6/etc/config/network b/openwrt/target/linux/package/base-files/files/xscale-2.6/etc/config/network
deleted file mode 100644
index f60332cd8c..0000000000
--- a/openwrt/target/linux/package/base-files/files/xscale-2.6/etc/config/network
+++ /dev/null
@@ -1,5 +0,0 @@
-# Network configuration file
-
-## LAN configuration
-lan_ifname="eth0"
-lan_proto="dhcp"
diff --git a/openwrt/target/linux/package/base-files/files/xscale-2.6/etc/init.d/S00xscale b/openwrt/target/linux/package/base-files/files/xscale-2.6/etc/init.d/S00xscale
deleted file mode 100755
index 9836de423b..0000000000
--- a/openwrt/target/linux/package/base-files/files/xscale-2.6/etc/init.d/S00xscale
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-mount none /proc -t proc
-mount_root failsafe
-mount -o remount,rw /dev/root /
diff --git a/openwrt/target/linux/package/base-files/files/xscale-2.6/init b/openwrt/target/linux/package/base-files/files/xscale-2.6/init
deleted file mode 100755
index 8ca48a04c1..0000000000
--- a/openwrt/target/linux/package/base-files/files/xscale-2.6/init
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/ash
-mount none /dev -t devfs
-exec /bin/busybox init
diff --git a/openwrt/target/linux/package/base-files/include/bcmnvram.h b/openwrt/target/linux/package/base-files/include/bcmnvram.h
deleted file mode 100644
index 3c452634e8..0000000000
--- a/openwrt/target/linux/package/base-files/include/bcmnvram.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * NVRAM variable manipulation
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#ifndef _bcmnvram_h_
-#define _bcmnvram_h_
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-#include <typedefs.h>
-
-struct nvram_header {
-	uint32 magic;
-	uint32 len;
-	uint32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */
-	uint32 config_refresh;	/* 0:15 config, 16:31 refresh */
-	uint32 config_ncdl;	/* ncdl values for memc */
-};
-
-struct nvram_tuple {
-	char *name;
-	char *value;
-	struct nvram_tuple *next;
-};
-
-/*
- * Initialize NVRAM access. May be unnecessary or undefined on certain
- * platforms.
- */
-extern int nvram_init(void *sbh);
-
-/*
- * Disable NVRAM access. May be unnecessary or undefined on certain
- * platforms.
- */
-extern void nvram_exit(void);
-
-/*
- * Get the value of an NVRAM variable. The pointer returned may be
- * invalid after a set.
- * @param	name	name of variable to get
- * @return	value of variable or NULL if undefined
- */
-extern char * nvram_get(const char *name);
-
-/* 
- * Get the value of an NVRAM variable.
- * @param	name	name of variable to get
- * @return	value of variable or NUL if undefined
- */
-#define nvram_safe_get(name) (nvram_get(name) ? : "")
-
-#define nvram_safe_unset(name) ({ \
-	if(nvram_get(name)) \
-		nvram_unset(name); \
-})
-
-#define nvram_safe_set(name, value) ({ \
-	if(!nvram_get(name) || strcmp(nvram_get(name), value)) \
-		nvram_set(name, value); \
-})
-
-/*
- * Match an NVRAM variable.
- * @param	name	name of variable to match
- * @param	match	value to compare against value of variable
- * @return	TRUE if variable is defined and its value is string equal
- *		to match or FALSE otherwise
- */
-static INLINE int
-nvram_match(char *name, char *match) {
-	const char *value = nvram_get(name);
-	return (value && !strcmp(value, match));
-}
-
-/*
- * Inversely match an NVRAM variable.
- * @param	name	name of variable to match
- * @param	match	value to compare against value of variable
- * @return	TRUE if variable is defined and its value is not string
- *		equal to invmatch or FALSE otherwise
- */
-static INLINE int
-nvram_invmatch(char *name, char *invmatch) {
-	const char *value = nvram_get(name);
-	return (value && strcmp(value, invmatch));
-}
-
-/*
- * Set the value of an NVRAM variable. The name and value strings are
- * copied into private storage. Pointers to previously set values
- * may become invalid. The new value may be immediately
- * retrieved but will not be permanently stored until a commit.
- * @param	name	name of variable to set
- * @param	value	value of variable
- * @return	0 on success and errno on failure
- */
-extern int nvram_set(const char *name, const char *value);
-
-/*
- * Unset an NVRAM variable. Pointers to previously set values
- * remain valid until a set.
- * @param	name	name of variable to unset
- * @return	0 on success and errno on failure
- * NOTE: use nvram_commit to commit this change to flash.
- */
-extern int nvram_unset(const char *name);
-
-/*
- * Commit NVRAM variables to permanent storage. All pointers to values
- * may be invalid after a commit.
- * NVRAM values are undefined after a commit.
- * @return	0 on success and errno on failure
- */
-extern int nvram_commit(void);
-
-/*
- * Get all NVRAM variables (format name=value\0 ... \0\0).
- * @param	buf	buffer to store variables
- * @param	count	size of buffer in bytes
- * @return	0 on success and errno on failure
- */
-extern int nvram_getall(char *buf, int count);
-
-extern int file2nvram(char *filename, char *varname);
-extern int nvram2file(char *varname, char *filename);
-
-#endif /* _LANGUAGE_ASSEMBLY */
-
-#define NVRAM_MAGIC		0x48534C46	/* 'FLSH' */
-#define NVRAM_VERSION		1
-#define NVRAM_HEADER_SIZE	20
-#define NVRAM_SPACE		0x8000
-#define FLASH_BASE		0xbfc00000	/* Extif core */
-#define FLASH_MIN		0x00100000	/* Minimum flash size */
-#define FLASH_MAX		0x00400000	/* Maximum flash size with extif */
-
-#endif /* _bcmnvram_h_ */
diff --git a/openwrt/target/linux/package/base-files/include/bcmutils.h b/openwrt/target/linux/package/base-files/include/bcmutils.h
deleted file mode 100644
index 05ad41d9d8..0000000000
--- a/openwrt/target/linux/package/base-files/include/bcmutils.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Misc useful os-independent macros and functions.
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- * $Id$
- */
-
-#ifndef	_bcmutils_h_
-#define	_bcmutils_h_
-
-#ifndef MIN
-#define	MIN(a, b)		(((a)<(b))?(a):(b))
-#endif
-
-#ifndef MAX
-#define	MAX(a, b)		(((a)>(b))?(a):(b))
-#endif
-
-#define CEIL(x, y)		(((x) + ((y)-1)) / (y))
-#define	ROUNDUP(x, y)		((((ulong)(x)+((y)-1))/(y))*(y))
-#define	ISALIGNED(a, x)		(((uint)(a) & ((x)-1)) == 0)
-#define	ISPOWEROF2(x)		((((x)-1)&(x))==0)
-#define	OFFSETOF(type, member)	((uint) &((type *)0)->member)
-#define ARRAYSIZE(a)		(sizeof(a)/sizeof(a[0]))
-
-/* bit map related macros */
-#ifndef setbit
-#define	NBBY	8	/* 8 bits per byte */
-#define	setbit(a,i)	((a)[(i)/NBBY] |= 1<<((i)%NBBY))
-#define	clrbit(a,i)	((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-#define	isset(a,i)	((a)[(i)/NBBY] & (1<<((i)%NBBY)))
-#define	isclr(a,i)	(((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-#endif
-
-#define	NBITS(type)	(sizeof (type) * 8)
-
-#define _BCM_U	0x01	/* upper */
-#define _BCM_L	0x02	/* lower */
-#define _BCM_D	0x04	/* digit */
-#define _BCM_C	0x08	/* cntrl */
-#define _BCM_P	0x10	/* punct */
-#define _BCM_S	0x20	/* white space (space/lf/tab) */
-#define _BCM_X	0x40	/* hex digit */
-#define _BCM_SP	0x80	/* hard space (0x20) */
-
-extern unsigned char bcm_ctype[];
-#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
-
-#define bcm_isalnum(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
-#define bcm_isalpha(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
-#define bcm_iscntrl(c)	((bcm_ismask(c)&(_BCM_C)) != 0)
-#define bcm_isdigit(c)	((bcm_ismask(c)&(_BCM_D)) != 0)
-#define bcm_isgraph(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
-#define bcm_islower(c)	((bcm_ismask(c)&(_BCM_L)) != 0)
-#define bcm_isprint(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
-#define bcm_ispunct(c)	((bcm_ismask(c)&(_BCM_P)) != 0)
-#define bcm_isspace(c)	((bcm_ismask(c)&(_BCM_S)) != 0)
-#define bcm_isupper(c)	((bcm_ismask(c)&(_BCM_U)) != 0)
-#define bcm_isxdigit(c)	((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
-
-/*
- * Spin at most 'us' microseconds while 'exp' is true.
- * Caller should explicitly test 'exp' when this completes
- * and take appropriate error action if 'exp' is still true.
- */
-#define SPINWAIT(exp, us) { \
-	uint countdown = (us) + 9; \
-	while ((exp) && (countdown >= 10)) {\
-		OSL_DELAY(10); \
-		countdown -= 10; \
-	} \
-}
-
-/* generic osl packet queue */
-struct pktq {
-	void *head;	/* first packet to dequeue */
-	void *tail;	/* last packet to dequeue */
-	uint len;	/* number of queued packets */
-	uint maxlen;	/* maximum number of queued packets */
-	bool priority;	/* enqueue by packet priority */
-};
-#define DEFAULT_QLEN	128
-
-#define	pktq_len(q)	((q)->len)
-#define	pktq_avail(q)	((q)->maxlen - (q)->len)
-#define	pktq_head(q)	((q)->head)
-#define	pktq_full(q)	((q)->len >= (q)->maxlen)
-
-/* crc defines */
-#define CRC8_INIT_VALUE  0xff		/* Initial CRC8 checksum value */
-#define CRC8_GOOD_VALUE  0x9f		/* Good final CRC8 checksum value */
-#define CRC16_INIT_VALUE 0xffff		/* Initial CRC16 checksum value */
-#define CRC16_GOOD_VALUE 0xf0b8		/* Good final CRC16 checksum value */
-#define CRC32_INIT_VALUE 0xffffffff	/* Initial CRC32 checksum value */
-#define CRC32_GOOD_VALUE 0xdebb20e3	/* Good final CRC32 checksum value */
-
-/* tag_ID/length/value_buffer tuple */
-typedef struct bcm_tlv {
-	uint8	id;
-	uint8	len;
-	uint8	data[1];
-} bcm_tlv_t;
-
-/* Check that bcm_tlv_t fits into the given buflen */
-#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (buflen) >= 2 + (elt)->len)
-
-/* buffer length for ethernet address from bcm_ether_ntoa() */
-#define ETHER_ADDR_STR_LEN	18
-
-/*
-* load 32-bit value from unaligned byte array
-*/
-#ifdef IL_BIGENDIAN
-#define load32_ua(a)	((((uint8 *)(a))[0] << 24) + (((uint8 *)(a))[1] << 16) + \
-			(((uint8 *)(a))[2] << 8) + ((uint8 *)(a))[3])
-#else
-#define load32_ua(a)	((((uint8 *)(a))[3] << 24) + (((uint8 *)(a))[2] << 16) + \
-			(((uint8 *)(a))[1] << 8) + ((uint8 *)(a))[0])
-#endif
-
-/* externs */
-extern uint bcm_atoi(char *s);
-extern uchar bcm_toupper(uchar c);
-extern ulong bcm_strtoul(char *cp, char **endp, uint base);
-extern void deadbeef(char *p, uint len);
-extern void prhex(char *msg, uchar *buf, uint len);
-extern void prpkt(char *msg, void *drv, void *p0);
-extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf);
-extern uint pkttotlen(void *drv, void *);
-extern uchar *bcm_ether_ntoa(char *ea, char *buf);
-extern int bcm_ether_atoe(char *p, char *ea);
-extern void bcm_mdelay(uint ms);
-extern char *getvar(char *vars, char *name);
-extern int getintvar(char *vars, char *name);
-extern char *bcmstrstr(char *haystack, char *needle);
-
-extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc);
-extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc);
-extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc);
-extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen);
-extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
-extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
-extern void pktq_init(struct pktq *q, uint maxlen, bool priority);
-extern bool pktenq(struct pktq *q, void *p, bool lifo);
-extern void *pktdeq(struct pktq *q);
-
-#define	bcmlog(fmt, a1, a2)
-#define	bcmdumplog(buf, size)	*buf = '\0'
-#define	bcmdumplogent(buf, idx)	-1
-
-#endif	/* _bcmutils_h_ */
diff --git a/openwrt/target/linux/package/base-files/include/cy_conf.h b/openwrt/target/linux/package/base-files/include/cy_conf.h
deleted file mode 100644
index dbe387b83b..0000000000
--- a/openwrt/target/linux/package/base-files/include/cy_conf.h
+++ /dev/null
@@ -1,69 +0,0 @@
-
-#define	DNSMASQ_SUPPORT	1
-#define	CONFIG_DNSMASQ	y
-#define	UDHCPD_SUPPORT	1
-#define	CONFIG_UDHCPD	y
-#define	UDHCPC_SUPPORT	1
-#define	CONFIG_UDHCPC	y
-#define	PPPOE_SUPPORT	1
-#define	CONFIG_PPPOE	y
-#define	PPTP_SUPPORT	1
-#define	CONFIG_PPTP	y
-#define	L2TP_SUPPORT	1
-#define	CONFIG_L2TP	y
-#define	PPPD_SUPPORT	1
-#define	CONFIG_PPPD	y
-#define	ZEBRA_SUPPORT	1
-#define	CONFIG_ZEBRA	y
-#define	TFTPD_SUPPORT	1
-#define	CONFIG_TFTPD	y
-#define	DDNS_SUPPORT	1
-#define	CONFIG_DDNS	y
-#define	CRON_SUPPORT	1
-#define	CONFIG_CRON	y
-#define	HTTPD_SUPPORT	1
-#define	CONFIG_HTTPD	y
-#define	GET_POST_SUPPORT	1
-#define	CONFIG_GET_POST	y
-
-#if 1
-#define	HEARTBEAT_SUPPORT	1
-#define	CONFIG_HEARTBEAT	y
-#define	MULTICAST_SUPPORT	1
-#define	CONFIG_MULTICAST	y
-#define	SETUP_WIZARD_SUPPORT	1
-#define	CONFIG_SETUP_WIZARD	y
-#define	PARENTAL_CONTROL_SUPPORT	1
-#define	CONFIG_PARENTAL_CONTROL	y
-#define	HTTPS_SUPPORT	1
-#define	CONFIG_HTTPS	y
-#define	EOU_SUPPORT	1
-#define	CONFIG_EOU	y
-#define	EZC_SUPPORT	1
-#define	CONFIG_EZC	y
-#define	WRITE_MAC_SUPPORT	1
-#define	CONFIG_WRITE_MAC	y
-#define	DIAG_SUPPORT	1
-#define	CONFIG_DIAG	y
-#endif
-
-#define	SPEED_BOOSTER_SUPPORT	1
-#define	CONFIG_SPEED_BOOSTER	y
-#define	XBOX_SUPPORT	1
-#define	CONFIG_XBOX	y
-
-#if 0
-#define	MPPPOE_SUPPORT	1
-#define	CONFIG_MPPPOE	y
-#define	UNNUMBERIP_SUPPORT	1
-#define	CONFIG_UNNUMBERIP	y
-#endif
-
-#define	WL_STA_SUPPORT	1
-#define	CONFIG_WL_STA	y
-#define	BACKUP_RESTORE_SUPPORT	1
-#define	CONFIG_BACKUP_RESTORE	y
-#define	PORT_TRIGGER_SUPPORT	1
-#define	CONFIG_PORT_TRIGGER	y
-#define	HW_QOS_SUPPORT	1
-#define	CONFIG_HW_QOS	y
diff --git a/openwrt/target/linux/package/base-files/include/epivers.h b/openwrt/target/linux/package/base-files/include/epivers.h
deleted file mode 100644
index e174fb50d8..0000000000
--- a/openwrt/target/linux/package/base-files/include/epivers.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- *
-*/
-
-#ifndef _epivers_h_
-#define _epivers_h_
-
-#ifdef	linux
-#include <linux/config.h>
-#endif
-
-/* Vendor Name, ASCII, 32 chars max */
-#ifdef COMPANYNAME
-#define	HPNA_VENDOR 		COMPANYNAME
-#else
-#define	HPNA_VENDOR 		"Broadcom Corporation"
-#endif
-
-/* Driver Date, ASCII, 32 chars max */
-#define HPNA_DRV_BUILD_DATE	__DATE__
-
-/* Hardware Manufacture Date, ASCII, 32 chars max */
-#define HPNA_HW_MFG_DATE	"Not Specified"
-
-/* See documentation for Device Type values, 32 values max */
-#ifndef	HPNA_DEV_TYPE
-
-#if	defined(CONFIG_BRCM_VJ)
-#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_DISPLAY }
-
-#elif	defined(CONFIG_BCRM_93725)
-#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
-
-#else
-#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_PCINIC }
-
-#endif
-
-#endif	/* !HPNA_DEV_TYPE */
-
-
-#define	EPI_MAJOR_VERSION	3
-
-#define	EPI_MINOR_VERSION	60
-
-#define	EPI_RC_NUMBER		13
-
-#define	EPI_INCREMENTAL_NUMBER	0
-
-#define	EPI_BUILD_NUMBER	0
-
-#define	EPI_VERSION		3,60,13,0
-
-#define	EPI_VERSION_NUM		0x033c0d00
-
-/* Driver Version String, ASCII, 32 chars max */
-#define	EPI_VERSION_STR		"3.60.13.0"
-#define	EPI_ROUTER_VERSION_STR	"3.61.13.0"
-
-#endif /* _epivers_h_ */
diff --git a/openwrt/target/linux/package/base-files/include/proto/802.11.h b/openwrt/target/linux/package/base-files/include/proto/802.11.h
deleted file mode 100644
index ea57850ce5..0000000000
--- a/openwrt/target/linux/package/base-files/include/proto/802.11.h
+++ /dev/null
@@ -1,852 +0,0 @@
-/*
- * Copyright 2004, Broadcom Corporation      
- * All Rights Reserved.      
- *       
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
- *
- * Fundamental types and constants relating to 802.11 
- *
- * $Id$
- */
-
-#ifndef _802_11_H_
-#define _802_11_H_
-
-#ifndef _TYPEDEFS_H_
-#include <typedefs.h>
-#endif
-
-#ifndef _NET_ETHERNET_H_
-#include <proto/ethernet.h>
-#endif
-
-/* enable structure packing */
-#if !defined(__GNUC__)
-#pragma pack(1)
-#endif
-
-/* some platforms require stronger medicine */
-#if defined(__GNUC__)
-#define	PACKED	__attribute__((packed))
-#else
-#define	PACKED
-#endif
-
-
-#define DOT11_TU_TO_US			1024	/* 802.11 Time Unit is 1024 microseconds */
-
-/* Generic 802.11 frame constants */
-#define DOT11_A3_HDR_LEN		24
-#define DOT11_A4_HDR_LEN		30
-#define DOT11_MAC_HDR_LEN		DOT11_A3_HDR_LEN
-#define DOT11_FCS_LEN			4
-#define DOT11_ICV_LEN			4
-#define DOT11_ICV_AES_LEN		8
-#define DOT11_QOS_LEN			2
-
-#define DOT11_KEY_INDEX_SHIFT		6
-#define DOT11_IV_LEN			4
-#define DOT11_IV_TKIP_LEN		8
-#define DOT11_IV_AES_OCB_LEN		4
-#define DOT11_IV_AES_CCM_LEN		8
-
-/* Includes MIC */
-#define DOT11_MAX_MPDU_BODY_LEN		2304
-/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */
-#define DOT11_MAX_MPDU_LEN		(DOT11_A4_HDR_LEN + \
-					 DOT11_QOS_LEN + \
-					 DOT11_IV_AES_CCM_LEN + \
-					 DOT11_MAX_MPDU_BODY_LEN + \
-					 DOT11_ICV_LEN + \
-					 DOT11_FCS_LEN)
-
-#define DOT11_MAX_SSID_LEN		32
-
-/* dot11RTSThreshold */
-#define DOT11_DEFAULT_RTS_LEN		2347
-#define DOT11_MAX_RTS_LEN		2347
-
-/* dot11FragmentationThreshold */
-#define DOT11_MIN_FRAG_LEN		256
-#define DOT11_MAX_FRAG_LEN		2346	/* Max frag is also limited by aMPDUMaxLength of the attached PHY */
-#define DOT11_DEFAULT_FRAG_LEN		2346
-
-/* dot11BeaconPeriod */
-#define DOT11_MIN_BEACON_PERIOD		1
-#define DOT11_MAX_BEACON_PERIOD		0xFFFF
-
-/* dot11DTIMPeriod */
-#define DOT11_MIN_DTIM_PERIOD		1
-#define DOT11_MAX_DTIM_PERIOD		0xFF
-
-/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
-#define DOT11_LLC_SNAP_HDR_LEN	8
-#define DOT11_OUI_LEN			3
-struct dot11_llc_snap_header {
-	uint8	dsap;				/* always 0xAA */
-	uint8	ssap;				/* always 0xAA */
-	uint8	ctl;				/* always 0x03 */
-	uint8	oui[DOT11_OUI_LEN];		/* RFC1042: 0x00 0x00 0x00
-						   Bridge-Tunnel: 0x00 0x00 0xF8 */
-	uint16	type;				/* ethertype */
-} PACKED;
-
-/* RFC1042 header used by 802.11 per 802.1H */
-#define RFC1042_HDR_LEN			(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)
-
-/* Generic 802.11 MAC header */
-/*
- * N.B.: This struct reflects the full 4 address 802.11 MAC header.
- *		 The fields are defined such that the shorter 1, 2, and 3
- *		 address headers just use the first k fields.
- */
-struct dot11_header {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	a1;		/* address 1 */
-	struct ether_addr	a2;		/* address 2 */
-	struct ether_addr	a3;		/* address 3 */
-	uint16			seq;		/* sequence control */
-	struct ether_addr	a4;		/* address 4 */
-} PACKED;
-
-/* Control frames */
-
-struct dot11_rts_frame {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	ra;		/* receiver address */
-	struct ether_addr	ta;		/* transmitter address */
-} PACKED;
-#define	DOT11_RTS_LEN		16
-
-struct dot11_cts_frame {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	ra;		/* receiver address */
-} PACKED;
-#define	DOT11_CTS_LEN		10
-
-struct dot11_ack_frame {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	ra;		/* receiver address */
-} PACKED;
-#define	DOT11_ACK_LEN		10
-
-struct dot11_ps_poll_frame {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* AID */
-	struct ether_addr	bssid;		/* receiver address, STA in AP */
-	struct ether_addr	ta;		/* transmitter address */
-} PACKED;
-#define	DOT11_PS_POLL_LEN	16
-
-struct dot11_cf_end_frame {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	ra;		/* receiver address */
-	struct ether_addr	bssid;		/* transmitter address, STA in AP */
-} PACKED;
-#define	DOT11_CS_END_LEN	16
-
-/* Management frame header */
-struct dot11_management_header {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	da;		/* receiver address */
-	struct ether_addr	sa;		/* transmitter address */
-	struct ether_addr	bssid;		/* BSS ID */
-	uint16			seq;		/* sequence control */
-} PACKED;
-#define	DOT11_MGMT_HDR_LEN	24
-
-/* Management frame payloads */
-
-struct dot11_bcn_prb {
-	uint32			timestamp[2];
-	uint16			beacon_interval;
-	uint16			capability;
-} PACKED;
-#define	DOT11_BCN_PRB_LEN	12
-
-struct dot11_auth {
-	uint16			alg;		/* algorithm */
-	uint16			seq;		/* sequence control */
-	uint16			status;		/* status code */
-} PACKED;
-#define DOT11_AUTH_FIXED_LEN	6		/* length of auth frame without challenge info elt */
-
-struct dot11_assoc_req {
-	uint16			capability;	/* capability information */
-	uint16			listen;		/* listen interval */
-} PACKED;
-
-struct dot11_assoc_resp {
-	uint16			capability;	/* capability information */
-	uint16			status;		/* status code */
-	uint16			aid;		/* association ID */
-} PACKED;
-
-struct dot11_action_measure {
-	uint8	category;
-	uint8	action;
-	uint8	token;
-	uint8	data[1];
-} PACKED;
-#define DOT11_ACTION_MEASURE_LEN	3
-
-/**************
-  802.11h related definitions.
-**************/
-typedef struct {
-	uint8 id;
-	uint8 len;
-	uint8 power;
-} dot11_power_cnst_t;
-
-typedef struct {
-	uint8 min;
-	uint8 max;
-} dot11_power_cap_t;
-
-typedef struct {
-	uint8 id;
-	uint8 len;
-	uint8 tx_pwr;
-	uint8 margin;
-} dot11_tpc_rep_t;
-#define DOT11_MNG_IE_TPC_REPORT_LEN	2	/* length of IE data, not including 2 byte header */
-
-typedef struct {
-	uint8 id;
-	uint8 len;
-	uint8 first_channel;
-	uint8 num_channels;
-} dot11_supp_channels_t;
-
-struct dot11_channel_switch {
-	uint8 id;
-	uint8 len;
-	uint8 mode;
-	uint8 channel;
-	uint8 count;
-}  PACKED;
-typedef struct dot11_channel_switch dot11_channel_switch_t;
-
-/* 802.11h Measurement Request/Report IEs */
-/* Measurement Type field */
-#define DOT11_MEASURE_TYPE_BASIC 	0
-#define DOT11_MEASURE_TYPE_CCA 		1
-#define DOT11_MEASURE_TYPE_RPI	 	2
-
-/* Measurement Mode field */
-
-/* Measurement Request Modes */
-#define DOT11_MEASURE_MODE_ENABLE 	(1<<1)
-#define DOT11_MEASURE_MODE_REQUEST	(1<<2)
-#define DOT11_MEASURE_MODE_REPORT 	(1<<3)
-/* Measurement Report Modes */
-#define DOT11_MEASURE_MODE_LATE 	(1<<0)
-#define DOT11_MEASURE_MODE_INCAPABLE	(1<<1)
-#define DOT11_MEASURE_MODE_REFUSED	(1<<2)
-/* Basic Measurement Map bits */
-#define DOT11_MEASURE_BASIC_MAP_BSS	((uint8)(1<<0))
-#define DOT11_MEASURE_BASIC_MAP_OFDM	((uint8)(1<<1))
-#define DOT11_MEASURE_BASIC_MAP_UKNOWN	((uint8)(1<<2))
-#define DOT11_MEASURE_BASIC_MAP_RADAR	((uint8)(1<<3))
-#define DOT11_MEASURE_BASIC_MAP_UNMEAS	((uint8)(1<<4))
-
-typedef struct {
-	uint8 id;
-	uint8 len;
-	uint8 token;
-	uint8 mode;
-	uint8 type;
-	uint8 channel;
-	uint8 start_time[8];
-	uint16 duration;
-} dot11_meas_req_t;
-#define DOT11_MNG_IE_MREQ_LEN 14
-/* length of Measure Request IE data not including variable len */
-#define DOT11_MNG_IE_MREQ_FIXED_LEN 3
-
-struct dot11_meas_rep {
-	uint8 id;
-	uint8 len;
-	uint8 token;
-	uint8 mode;
-	uint8 type;
-	union 
-	{
-		struct {
-			uint8 channel;
-			uint8 start_time[8];
-			uint16 duration;
-			uint8 map;
-		} PACKED basic;
-		uint8 data[1];
-	} PACKED rep;
-} PACKED;
-typedef struct dot11_meas_rep dot11_meas_rep_t;
-
-/* length of Measure Report IE data not including variable len */
-#define DOT11_MNG_IE_MREP_FIXED_LEN	3
-
-struct dot11_meas_rep_basic {
-	uint8 channel;
-	uint8 start_time[8];
-	uint16 duration;
-	uint8 map;
-} PACKED;
-typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
-#define DOT11_MEASURE_BASIC_REP_LEN	12
-
-struct dot11_quiet {
-	uint8 id;
-	uint8 len;
-	uint8 count;	/* TBTTs until beacon interval in quiet starts */
-	uint8 period;	/* Beacon intervals between periodic quiet periods ? */
-	uint16 duration;/* Length of quiet period, in TU's */
-	uint16 offset;	/* TU's offset from TBTT in Count field */
-} PACKED;
-typedef struct dot11_quiet dot11_quiet_t;
-
-typedef struct {
-	uint8 channel;
-	uint8 map;
-} chan_map_tuple_t;
-
-typedef struct {
-	uint8 id;
-	uint8 len;
-	uint8 eaddr[ETHER_ADDR_LEN];
-	uint8 interval;
-	chan_map_tuple_t map[1];
-} dot11_ibss_dfs_t;
-
-/* WME Elements */
-#define WME_OUI			"\x00\x50\xf2"
-#define WME_VER			1
-#define WME_TYPE		2
-#define WME_SUBTYPE_IE		0	/* Information Element */
-#define WME_SUBTYPE_PARAM_IE	1	/* Parameter Element */
-#define WME_SUBTYPE_TSPEC	2	/* Traffic Specification */
-
-/* WME Access Category Indices (ACIs) */
-#define AC_BE			0	/* Best Effort */
-#define AC_BK			1	/* Background */
-#define AC_VI			2	/* Video */
-#define AC_VO			3	/* Voice */
-#define AC_MAX			4
-
-/* WME Information Element (IE) */
-struct wme_ie {
-	uint8 oui[3];
-	uint8 type;
-	uint8 subtype;
-	uint8 version;
-	uint8 acinfo;
-} PACKED;
-typedef struct wme_ie wme_ie_t;
-#define WME_IE_LEN 7
-
-struct wme_acparam {
-	uint8	ACI;
-	uint8	ECW;
-	uint16  TXOP;		/* stored in network order (ls octet first) */
-} PACKED;
-typedef struct wme_acparam wme_acparam_t;
-
-/* WME Parameter Element (PE) */
-struct wme_params {
-	uint8 oui[3];
-	uint8 type;
-	uint8 subtype;
-	uint8 version;
-	uint8 acinfo;
-	uint8 rsvd;
-	wme_acparam_t acparam[4];
-} PACKED;
-typedef struct wme_params wme_params_t;
-#define WME_PARAMS_IE_LEN	24
-
-/* acinfo */
-#define WME_COUNT_MASK 	0x0f
-/* ACI */
-#define WME_AIFS_MASK 	0x0f
-#define WME_ACM_MASK 	0x10
-#define WME_ACI_MASK 	0x60
-#define WME_ACI_SHIFT 	5
-/* ECW */
-#define WME_CWMIN_MASK	0x0f
-#define WME_CWMAX_MASK	0xf0
-#define WME_CWMAX_SHIFT	4
-
-#define WME_TXOP_UNITS	32
-
-/* WME Traffic Specification (TSPEC) element */
-#define WME_SUBTYPE_TSPEC 2
-#define WME_TSPEC_HDR_LEN		2
-#define WME_TSPEC_BODY_OFF		2
-struct wme_tspec {
-	uint8 oui[DOT11_OUI_LEN];	/* WME_OUI */
-	uint8 type;			/* WME_TYPE */
-	uint8 subtype;			/* WME_SUBTYPE_TSPEC */
-	uint8 version;			/* WME_VERSION */
-	uint16 ts_info;			/* TS Info */
-	uint16 nom_msdu_size;		/* (Nominal or fixed) MSDU Size (bytes) */
-	uint16 max_msdu_size;		/* Maximum MSDU Size (bytes) */
-	uint32 min_service_interval;	/* Minimum Service Interval (us) */
-	uint32 max_service_interval;	/* Maximum Service Interval (us) */
-	uint32 inactivity_interval;	/* Inactivity Interval (us) */
-	uint32 service_start;		/* Service Start Time (us) */
-	uint32 min_rate;		/* Minimum Data Rate (bps) */
-	uint32 mean_rate;		/* Mean Data Rate (bps) */
-	uint32 max_burst_size;		/* Maximum Burst Size (bytes) */
-	uint32 min_phy_rate;		/* Minimum PHY Rate (bps) */
-	uint32 peak_rate;		/* Peak Data Rate (bps) */
-	uint32 delay_bound;		/* Delay Bound (us) */
-	uint16 surplus_bandwidth;	/* Surplus Bandwidth Allowance Factor */
-	uint16 medium_time;		/* Medium Time (32 us/s periods) */
-} PACKED;
-typedef struct wme_tspec wme_tspec_t;
-#define WME_TSPEC_LEN 56		/* not including 2-byte header */
-
-/* ts_info */
-/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */
-#define TS_INFO_PRIO_SHIFT_HI		11
-#define TS_INFO_PRIO_MASK_HI		(0x7 << TS_INFO_PRIO_SHIFT_HI)
-#define TS_INFO_PRIO_SHIFT_LO		1
-#define TS_INFO_PRIO_MASK_LO		(0x7 << TS_INFO_PRIO_SHIFT_LO)
-#define TS_INFO_CONTENTION_SHIFT	7
-#define TS_INFO_CONTENTION_MASK		(0x1 << TS_INFO_CONTENTION_SHIFT)
-#define TS_INFO_DIRECTION_SHIFT		5
-#define TS_INFO_DIRECTION_MASK		(0x3 << TS_INFO_DIRECTION_SHIFT)
-#define TS_INFO_UPLINK			(0 << TS_INFO_DIRECTION_SHIFT)
-#define TS_INFO_DOWNLINK		(1 << TS_INFO_DIRECTION_SHIFT)
-#define TS_INFO_BIDIRECTIONAL		(3 << TS_INFO_DIRECTION_SHIFT)
-
-/* nom_msdu_size */
-#define FIXED_MSDU_SIZE 0x8000		/* MSDU size is fixed */
-#define MSDU_SIZE_MASK	0x7fff		/* (Nominal or fixed) MSDU size */
-
-/* surplus_bandwidth */
-/* Represented as 3 bits of integer, binary point, 13 bits fraction */
-#define	INTEGER_SHIFT	13
-#define FRACTION_MASK	0x1FFF
-
-/* Management Notification Frame */
-struct dot11_management_notification {
-	uint8 category;			/* DOT11_ACTION_NOTIFICATION */
-	uint8 action;
-	uint8 token;
-	uint8 status;
-	uint8 data[1];			/* Elements */
-} PACKED;
-#define DOT11_MGMT_NOTIFICATION_LEN 4	/* Fixed length */
-
-/* WME Action Codes */
-#define WME_SETUP_REQUEST	0
-#define WME_SETUP_RESPONSE	1
-#define WME_TEARDOWN		2
-
-/* WME Setup Response Status Codes */
-#define WME_ADMISSION_ACCEPTED	0
-#define WME_INVALID_PARAMETERS	1
-#define WME_ADMISSION_REFUSED	3
-
-/* Macro to take a pointer to a beacon or probe response
- * header and return the char* pointer to the SSID info element
- */
-#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN)
-
-/* Authentication frame payload constants */
-#define DOT11_OPEN_SYSTEM	0
-#define DOT11_SHARED_KEY	1
-#define DOT11_CHALLENGE_LEN	128
-
-/* Frame control macros */
-#define FC_PVER_MASK		0x3
-#define FC_PVER_SHIFT		0
-#define FC_TYPE_MASK		0xC
-#define FC_TYPE_SHIFT		2
-#define FC_SUBTYPE_MASK		0xF0
-#define FC_SUBTYPE_SHIFT	4
-#define FC_TODS			0x100
-#define FC_TODS_SHIFT		8
-#define FC_FROMDS		0x200
-#define FC_FROMDS_SHIFT		9
-#define FC_MOREFRAG		0x400
-#define FC_MOREFRAG_SHIFT	10
-#define FC_RETRY		0x800
-#define FC_RETRY_SHIFT		11
-#define FC_PM			0x1000
-#define FC_PM_SHIFT		12
-#define FC_MOREDATA		0x2000
-#define FC_MOREDATA_SHIFT	13
-#define FC_WEP			0x4000
-#define FC_WEP_SHIFT		14
-#define FC_ORDER		0x8000
-#define FC_ORDER_SHIFT		15
-
-/* sequence control macros */
-#define SEQNUM_SHIFT		4
-#define FRAGNUM_MASK		0xF
-
-/* Frame Control type/subtype defs */
-
-/* FC Types */
-#define FC_TYPE_MNG		0
-#define FC_TYPE_CTL		1
-#define FC_TYPE_DATA		2
-
-/* Management Subtypes */
-#define FC_SUBTYPE_ASSOC_REQ		0
-#define FC_SUBTYPE_ASSOC_RESP		1
-#define FC_SUBTYPE_REASSOC_REQ		2
-#define FC_SUBTYPE_REASSOC_RESP		3
-#define FC_SUBTYPE_PROBE_REQ		4
-#define FC_SUBTYPE_PROBE_RESP		5
-#define FC_SUBTYPE_BEACON		8
-#define FC_SUBTYPE_ATIM			9
-#define FC_SUBTYPE_DISASSOC		10
-#define FC_SUBTYPE_AUTH			11
-#define FC_SUBTYPE_DEAUTH		12
-#define FC_SUBTYPE_ACTION		13
-
-/* Control Subtypes */
-#define FC_SUBTYPE_PS_POLL		10
-#define FC_SUBTYPE_RTS			11
-#define FC_SUBTYPE_CTS			12
-#define FC_SUBTYPE_ACK			13
-#define FC_SUBTYPE_CF_END		14
-#define FC_SUBTYPE_CF_END_ACK		15
-
-/* Data Subtypes */
-#define FC_SUBTYPE_DATA			0
-#define FC_SUBTYPE_DATA_CF_ACK		1
-#define FC_SUBTYPE_DATA_CF_POLL		2
-#define FC_SUBTYPE_DATA_CF_ACK_POLL	3
-#define FC_SUBTYPE_NULL			4
-#define FC_SUBTYPE_CF_ACK		5
-#define FC_SUBTYPE_CF_POLL		6
-#define FC_SUBTYPE_CF_ACK_POLL		7
-#define FC_SUBTYPE_QOS_DATA		8
-#define FC_SUBTYPE_QOS_NULL		12
-
-/* type-subtype combos */
-#define FC_KIND_MASK		(FC_TYPE_MASK | FC_SUBTYPE_MASK)
-
-#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))
-
-#define FC_ASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)
-#define FC_ASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)
-#define FC_REASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)
-#define FC_REASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)
-#define FC_PROBE_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)
-#define FC_PROBE_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)
-#define FC_BEACON	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)
-#define FC_DISASSOC	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)
-#define FC_AUTH		FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)
-#define FC_DEAUTH	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)
-#define FC_ACTION	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)
-
-#define FC_PS_POLL	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)
-#define FC_RTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)
-#define FC_CTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)
-#define FC_ACK		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)
-#define FC_CF_END	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)
-#define FC_CF_END_ACK	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)
-
-#define FC_DATA		FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)
-#define FC_NULL_DATA	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)
-#define FC_DATA_CF_ACK	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)
-#define FC_QOS_DATA	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA)
-#define FC_QOS_NULL	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL)
-
-/* QoS Control Field */
-
-/* 802.1D Tag */
-#define QOS_PRIO_SHIFT		0
-#define QOS_PRIO_MASK		0x0007
-#define QOS_PRIO(qos)		(((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT)
-
-/* Ack Policy (0 means Acknowledge) */
-#define QOS_ACK_SHIFT		5
-#define QOS_ACK_MASK		0x0060
-#define QOS_ACK(qos)		(((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT)
-
-/* Management Frames */
-
-/* Management Frame Constants */
-
-/* Fixed fields */
-#define DOT11_MNG_AUTH_ALGO_LEN		2
-#define DOT11_MNG_AUTH_SEQ_LEN		2
-#define DOT11_MNG_BEACON_INT_LEN	2
-#define DOT11_MNG_CAP_LEN		2
-#define DOT11_MNG_AP_ADDR_LEN		6
-#define DOT11_MNG_LISTEN_INT_LEN	2
-#define DOT11_MNG_REASON_LEN		2
-#define DOT11_MNG_AID_LEN		2
-#define DOT11_MNG_STATUS_LEN		2
-#define DOT11_MNG_TIMESTAMP_LEN		8
-
-/* DUR/ID field in assoc resp is 0xc000 | AID */
-#define DOT11_AID_MASK			0x3fff
-
-/* Reason Codes */
-#define DOT11_RC_RESERVED			0
-#define DOT11_RC_UNSPECIFIED			1	/* Unspecified reason */
-#define DOT11_RC_AUTH_INVAL			2	/* Previous authentication no longer valid */
-#define DOT11_RC_DEAUTH_LEAVING			3	/* Deauthenticated because sending station is
-							   leaving (or has left) IBSS or ESS */
-#define DOT11_RC_INACTIVITY			4	/* Disassociated due to inactivity */
-#define DOT11_RC_BUSY				5	/* Disassociated because AP is unable to handle
-							   all currently associated stations */
-#define DOT11_RC_INVAL_CLASS_2			6	/* Class 2 frame received from
-							   nonauthenticated station */
-#define DOT11_RC_INVAL_CLASS_3			7	/* Class 3 frame received from
-							   nonassociated station */
-#define DOT11_RC_DISASSOC_LEAVING		8	/* Disassociated because sending station is
-							   leaving (or has left) BSS */
-#define DOT11_RC_NOT_AUTH			9	/* Station requesting (re)association is
-							   not authenticated with responding station */
-#define DOT11_RC_MAX				23	/* Reason codes > 23 are reserved */
-
-/* Status Codes */
-#define DOT11_STATUS_SUCCESS			0	/* Successful */
-#define DOT11_STATUS_FAILURE			1	/* Unspecified failure */
-#define DOT11_STATUS_CAP_MISMATCH		10	/* Cannot support all requested capabilities
-							   in the Capability Information field */
-#define DOT11_STATUS_REASSOC_FAIL		11	/* Reassociation denied due to inability to
-							   confirm that association exists */
-#define DOT11_STATUS_ASSOC_FAIL			12	/* Association denied due to reason outside
-							   the scope of this standard */
-#define DOT11_STATUS_AUTH_MISMATCH		13	/* Responding station does not support the
-							   specified authentication algorithm */
-#define DOT11_STATUS_AUTH_SEQ			14	/* Received an Authentication frame with
-							   authentication transaction sequence number
-							   out of expected sequence */
-#define DOT11_STATUS_AUTH_CHALLENGE_FAIL	15	/* Authentication rejected because of challenge failure */
-#define DOT11_STATUS_AUTH_TIMEOUT		16	/* Authentication rejected due to timeout waiting
-							   for next frame in sequence */
-#define DOT11_STATUS_ASSOC_BUSY_FAIL		17	/* Association denied because AP is unable to
-							   handle additional associated stations */
-#define DOT11_STATUS_ASSOC_RATE_MISMATCH	18	/* Association denied due to requesting station
-							   not supporting all of the data rates in the
-							   BSSBasicRateSet parameter */
-#define DOT11_STATUS_ASSOC_SHORT_REQUIRED	19	/* Association denied due to requesting station
-							   not supporting the Short Preamble option */
-#define DOT11_STATUS_ASSOC_PBCC_REQUIRED	20	/* Association denied due to requesting station
-							   not supporting the PBCC Modulation option */
-#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED	21	/* Association denied due to requesting station
-							   not supporting the Channel Agility option */
-#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED	22	/* Association denied because Spectrum Management 
-							   capability is required. */
-#define DOT11_STATUS_ASSOC_BAD_POWER_CAP	23	/* Association denied because the info in the 
-							   Power Cap element is unacceptable. */
-#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS	24	/* Association denied because the info in the 
-							   Supported Channel element is unacceptable */
-#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED	25	/* Association denied due to requesting station
-							   not supporting the Short Slot Time option */
-#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED	26	/* Association denied due to requesting station
-							   not supporting the ER-PBCC Modulation option */
-#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED	27	/* Association denied due to requesting station
-							   not supporting the DSS-OFDM option */
-
-/* Info Elts, length of INFORMATION portion of Info Elts */
-#define DOT11_MNG_DS_PARAM_LEN			1
-#define DOT11_MNG_IBSS_PARAM_LEN		2
-
-/* TIM Info element has 3 bytes fixed info in INFORMATION field,
- * followed by 1 to 251 bytes of Partial Virtual Bitmap */
-#define DOT11_MNG_TIM_FIXED_LEN			3
-#define DOT11_MNG_TIM_DTIM_COUNT		0
-#define DOT11_MNG_TIM_DTIM_PERIOD		1
-#define DOT11_MNG_TIM_BITMAP_CTL		2
-#define DOT11_MNG_TIM_PVB			3
-
-/* TLV defines */
-#define TLV_TAG_OFF		0
-#define TLV_LEN_OFF		1
-#define TLV_HDR_LEN		2
-#define TLV_BODY_OFF		2
-
-/* Management Frame Information Element IDs */
-#define DOT11_MNG_SSID_ID			0
-#define DOT11_MNG_RATES_ID			1
-#define DOT11_MNG_FH_PARMS_ID			2
-#define DOT11_MNG_DS_PARMS_ID			3
-#define DOT11_MNG_CF_PARMS_ID			4
-#define DOT11_MNG_TIM_ID			5
-#define DOT11_MNG_IBSS_PARMS_ID			6
-#define DOT11_MNG_COUNTRY_ID			7
-#define DOT11_MNG_HOPPING_PARMS_ID		8
-#define DOT11_MNG_HOPPING_TABLE_ID		9
-#define DOT11_MNG_REQUEST_ID			10
-#define DOT11_MNG_CHALLENGE_ID			16
-#define DOT11_MNG_PWR_CONSTRAINT_ID		32    /* 11H PowerConstraint	*/
-#define DOT11_MNG_PWR_CAP_ID			33    /* 11H PowerCapability	*/
-#define DOT11_MNG_TPC_REQUEST_ID 		34    /* 11H TPC Request	*/
-#define DOT11_MNG_TPC_REPORT_ID			35    /* 11H TPC Report		*/
-#define DOT11_MNG_SUPP_CHANNELS_ID		36    /* 11H Supported Channels	*/
-#define DOT11_MNG_CHANNEL_SWITCH_ID		37    /* 11H ChannelSwitch Announcement*/
-#define DOT11_MNG_MEASURE_REQUEST_ID		38    /* 11H MeasurementRequest	*/
-#define DOT11_MNG_MEASURE_REPORT_ID		39    /* 11H MeasurementReport	*/
-#define DOT11_MNG_QUIET_ID			40    /* 11H Quiet		*/
-#define DOT11_MNG_IBSS_DFS_ID			41    /* 11H IBSS_DFS 		*/
-#define DOT11_MNG_ERP_ID			42
-#define DOT11_MNG_NONERP_ID			47
-#define DOT11_MNG_EXT_RATES_ID			50
-#define DOT11_MNG_WPA_ID			221
-#define DOT11_MNG_PROPR_ID			221
-
-/* ERP info element bit values */
-#define DOT11_MNG_ERP_LEN			1	/* ERP is currently 1 byte long */
-#define DOT11_MNG_NONERP_PRESENT		0x01	/* NonERP (802.11b) STAs are present in the BSS */
-#define DOT11_MNG_USE_PROTECTION		0x02	/* Use protection mechanisms for ERP-OFDM frames */
-#define DOT11_MNG_BARKER_PREAMBLE		0x04	/* Short Preambles: 0 == allowed, 1 == not allowed */
-
-/* Capability Information Field */
-#define DOT11_CAP_ESS				0x0001
-#define DOT11_CAP_IBSS				0x0002
-#define DOT11_CAP_POLLABLE			0x0004
-#define DOT11_CAP_POLL_RQ			0x0008
-#define DOT11_CAP_PRIVACY			0x0010
-#define DOT11_CAP_SHORT				0x0020
-#define DOT11_CAP_PBCC				0x0040
-#define DOT11_CAP_AGILITY			0x0080
-#define DOT11_CAP_SPECTRUM			0x0100
-#define DOT11_CAP_SHORTSLOT			0x0400
-#define DOT11_CAP_CCK_OFDM			0x2000
-
-/* Action Frame Constants */
-#define DOT11_ACTION_CAT_ERR_MASK	0x80
-#define DOT11_ACTION_CAT_SPECT_MNG	0x00
-#define DOT11_ACTION_NOTIFICATION	0x11	/* 17 */
-
-#define DOT11_ACTION_ID_M_REQ		0
-#define DOT11_ACTION_ID_M_REP		1
-#define DOT11_ACTION_ID_TPC_REQ		2
-#define DOT11_ACTION_ID_TPC_REP		3
-#define DOT11_ACTION_ID_CHANNEL_SWITCH	4
-
-/* MLME Enumerations */
-#define DOT11_BSSTYPE_INFRASTRUCTURE		0
-#define DOT11_BSSTYPE_INDEPENDENT		1
-#define DOT11_BSSTYPE_ANY			2
-#define DOT11_SCANTYPE_ACTIVE			0
-#define DOT11_SCANTYPE_PASSIVE			1
-
-/* 802.11 A PHY constants */
-#define APHY_SLOT_TIME		9
-#define APHY_SIFS_TIME		16
-#define APHY_DIFS_TIME		(APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))
-#define APHY_PREAMBLE_TIME	16
-#define APHY_SIGNAL_TIME	4
-#define APHY_SYMBOL_TIME	4
-#define APHY_SERVICE_NBITS	16
-#define APHY_TAIL_NBITS		6
-#define	APHY_CWMIN		15
-
-/* 802.11 B PHY constants */
-#define BPHY_SLOT_TIME		20
-#define BPHY_SIFS_TIME		10
-#define BPHY_DIFS_TIME		50
-#define BPHY_PLCP_TIME		192
-#define BPHY_PLCP_SHORT_TIME	96
-#define	BPHY_CWMIN		31
-
-/* 802.11 G constants */
-#define DOT11_OFDM_SIGNAL_EXTENSION	6
-
-#define PHY_CWMAX		1023
-
-#define	DOT11_MAXNUMFRAGS	16	/* max # fragments per MSDU */
-
-/* dot11Counters Table - 802.11 spec., Annex D */
-typedef struct d11cnt {
-	uint32		txfrag;		/* dot11TransmittedFragmentCount */
-	uint32		txmulti;	/* dot11MulticastTransmittedFrameCount */
-	uint32		txfail;		/* dot11FailedCount */
-	uint32		txretry;	/* dot11RetryCount */
-	uint32		txretrie;	/* dot11MultipleRetryCount */
-	uint32		rxdup;		/* dot11FrameduplicateCount */
-	uint32		txrts;		/* dot11RTSSuccessCount */
-	uint32		txnocts;	/* dot11RTSFailureCount */
-	uint32		txnoack;	/* dot11ACKFailureCount */
-	uint32		rxfrag;		/* dot11ReceivedFragmentCount */
-	uint32		rxmulti;	/* dot11MulticastReceivedFrameCount */
-	uint32		rxcrc;		/* dot11FCSErrorCount */
-	uint32		txfrmsnt;	/* dot11TransmittedFrameCount */
-	uint32		rxundec;	/* dot11WEPUndecryptableCount */
-} d11cnt_t;
-
-/* BRCM OUI */
-#define BRCM_OUI		"\x00\x10\x18"
-
-/* BRCM info element */
-struct brcm_ie {
-	uchar	id;		
-	uchar	len;   
-	uchar 	oui[3];
-	uchar	ver;
-	uchar	assoc;		/*  # of assoc STAs */
-	uchar	flags;		/* misc flags */
-} PACKED;
-#define BRCM_IE_LEN		8
-typedef	struct brcm_ie brcm_ie_t;
-#define BRCM_IE_VER		1
-
-/* brcm_ie flags */
-#define	BRF_ABCAP		0x1	/* afterburner capable */
-#define	BRF_ABRQRD		0x2	/* afterburner requested */
-
-/* WPA definitions */
-#define WPA_VERSION		1
-#define WPA_OUI			"\x00\x50\xF2"
-
-#define WPA_OUI_LEN	3
-
-/* WPA authentication modes */
-#define WPA_AUTH_NONE		0	/* None */
-#define WPA_AUTH_UNSPECIFIED	1	/* Unspecified authentication over 802.1X: default for WPA */
-#define WPA_AUTH_PSK		2	/* Pre-shared Key over 802.1X */
-#define WPA_AUTH_DISABLED	255	/* Legacy (i.e., non-WPA) */
-				 
-#define IS_WPA_AUTH(auth)	((auth) == WPA_AUTH_NONE || \
-				 (auth) == WPA_AUTH_UNSPECIFIED || \
-				 (auth) == WPA_AUTH_PSK)
-
-
-/* Key related defines */
-#define DOT11_MAX_DEFAULT_KEYS	4	/* number of default keys */
-#define DOT11_MAX_KEY_SIZE	32	/* max size of any key */
-#define DOT11_MAX_IV_SIZE	16	/* max size of any IV */
-#define DOT11_EXT_IV_FLAG	(1<<5)	/* flag to indicate IV is > 4 bytes */
-
-#define WEP1_KEY_SIZE		5	/* max size of any WEP key */
-#define WEP1_KEY_HEX_SIZE	10	/* size of WEP key in hex. */
-#define WEP128_KEY_SIZE		13	/* max size of any WEP key */
-#define WEP128_KEY_HEX_SIZE	26	/* size of WEP key in hex. */
-#define TKIP_MIC_SIZE		8	/* size of TKIP MIC */
-#define TKIP_EOM_SIZE		7	/* max size of TKIP EOM */
-#define TKIP_EOM_FLAG		0x5a	/* TKIP EOM flag byte */
-#define TKIP_KEY_SIZE		32	/* size of any TKIP key */
-#define TKIP_MIC_AUTH_TX	16	/* offset to Authenticator MIC TX key */
-#define TKIP_MIC_AUTH_RX	24	/* offset to Authenticator MIC RX key */
-#define TKIP_MIC_SUP_RX		16	/* offset to Supplicant MIC RX key */
-#define TKIP_MIC_SUP_TX		24	/* offset to Supplicant MIC TX key */
-#define AES_KEY_SIZE		16	/* size of AES key */
-
-#undef PACKED
-#if !defined(__GNUC__)
-#pragma pack()
-#endif
-
-#endif /* _802_11_H_ */
diff --git a/openwrt/target/linux/package/base-files/include/proto/ethernet.h b/openwrt/target/linux/package/base-files/include/proto/ethernet.h
deleted file mode 100644
index 173464af63..0000000000
--- a/openwrt/target/linux/package/base-files/include/proto/ethernet.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*******************************************************************************
- * $Id$
- * Copyright 2004, Broadcom Corporation      
- * All Rights Reserved.      
- *       
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
- * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
- ******************************************************************************/
-
-#ifndef _NET_ETHERNET_H_	    /* use native BSD ethernet.h when available */
-#define _NET_ETHERNET_H_
-
-#ifndef _TYPEDEFS_H_
-#include "typedefs.h"
-#endif
-
-#if defined(__GNUC__)
-#define	PACKED	__attribute__((packed))
-#else
-#define	PACKED
-#endif
-
-/*
- * The number of bytes in an ethernet (MAC) address.
- */
-#ifndef ETHER_ADDR_LEN
-#define	ETHER_ADDR_LEN		6
-#endif
-
-/*
- * The number of bytes in the type field.
- */
-#ifndef	ETHER_TYPE_LEN
-#define	ETHER_TYPE_LEN		2
-#endif
-
-/*
- * The number of bytes in the trailing CRC field.
- */
-#ifndef	ETHER_CRC_LEN
-#define	ETHER_CRC_LEN		4
-#endif
-
-/*
- * The length of the combined header.
- */
-#ifndef	ETHER_HDR_LEN
-#define	ETHER_HDR_LEN		(ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
-#endif
-
-/*
- * The minimum packet length.
- */
-#ifndef ETHER_MIN_LEN
-#define	ETHER_MIN_LEN		64
-#endif
-
-/*
- * The minimum packet user data length.
- */
-#ifndef ETHER_MIN_DATA
-#define	ETHER_MIN_DATA		46
-#endif
-
-/*
- * The maximum packet length.
- */
-#ifndef ETHER_MAX_LEN
-#define	ETHER_MAX_LEN		1518
-#endif
-
-/*
- * The maximum packet user data length.
- */
-#define	ETHER_MAX_DATA		1500
-
-/*
- * Used to uniquely identify a 802.1q VLAN-tagged header.
- */
-#define	VLAN_TAG			0x8100
-
-/*
- * Located after dest & src address in ether header.
- */
-#define VLAN_FIELDS_OFFSET		(ETHER_ADDR_LEN * 2)
-
-/*
- * 4 bytes of vlan field info.
- */
-#define VLAN_FIELDS_SIZE		4
-
-/* location of bits in 16-bit vlan fields */
-#define VLAN_PRI_SHIFT		13	/* user priority */
-#define VLAN_CFI_SHIFT		12	/* canonical format indicator bit */
-
-/* 3 bits of priority */
-#define VLAN_PRI_MASK			7
-/* 12 bits of vlan identfier (VID) */
-#define VLAN_VID_MASK		0xFFF	/* VLAN identifier (VID) field */
-
-struct  vlan_tags {
-	uint16  tag_type;	/* 0x8100 for VLAN */
-	uint16  tag_control;	/* prio | cfi | vid */
-} PACKED ;
-
-/* 802.1X ethertype */
-
-#define	ETHER_TYPE_IP		0x0800		/* IP */
-#define	ETHER_TYPE_BRCM		0x886c		/* Broadcom Corp. */
-#define	ETHER_TYPE_802_1X	0x888e		/* 802.1x */
-
-#define	ETHER_BRCM_SUBTYPE_LEN	4		/* Broadcom 4byte subtype follows ethertype */
-#define	ETHER_BRCM_CRAM		0x1		/* Broadcom subtype cram protocol */
-
-/*
- * A macro to validate a length with
- */
-#define	ETHER_IS_VALID_LEN(foo)	\
-	((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
-
-#ifndef __NET_ETHERNET_H
-#ifndef __INCif_etherh     /* Quick and ugly hack for VxWorks */
-/*
- * Structure of a 10Mb/s Ethernet header.
- */
-struct	ether_header {
-	uint8	ether_dhost[ETHER_ADDR_LEN];
-	uint8	ether_shost[ETHER_ADDR_LEN];
-	uint16	ether_type;
-} PACKED ;
-
-/*
- * Structure of a 48-bit Ethernet address.
- */
-struct	ether_addr {
-	uint8 octet[ETHER_ADDR_LEN];
-} PACKED ;
-#endif
-#endif
-
-/*
- * Takes a pointer, returns true if a 48-bit multicast address
- * (including broadcast, since it is all ones)
- */
-#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
-
-/*
- * Takes a pointer, returns true if a 48-bit broadcast (all ones)
- */
-#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] &		\
-			    ((uint8 *)(ea))[1] &		\
-			    ((uint8 *)(ea))[2] &		\
-			    ((uint8 *)(ea))[3] &		\
-			    ((uint8 *)(ea))[4] &		\
-			    ((uint8 *)(ea))[5]) == 0xff)
-
-static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
-
-/*
- * Takes a pointer, returns true if a 48-bit null address (all zeros)
- */
-#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] |		\
-			    ((uint8 *)(ea))[1] |		\
-			    ((uint8 *)(ea))[2] |		\
-			    ((uint8 *)(ea))[3] |		\
-			    ((uint8 *)(ea))[4] |		\
-			    ((uint8 *)(ea))[5]) == 0)
-
-/* Differentiated Services Codepoint - lower 6 bits of tos in iphdr */
-#define	DSCP_PRI_MASK		0x3F		/* bits 0-6 */
-#define	DSCP_WME_PRI_MASK	0x38		/* bits 3-6 */
-#define	DSCP_WME_PRI_SHIFT	3
-
-#undef PACKED
-
-#endif /* _NET_ETHERNET_H_ */
diff --git a/openwrt/target/linux/package/base-files/include/shutils.h b/openwrt/target/linux/package/base-files/include/shutils.h
deleted file mode 100644
index 783ee9ede1..0000000000
--- a/openwrt/target/linux/package/base-files/include/shutils.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Shell-like utility functions
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#ifndef _shutils_h_
-#define _shutils_h_
-#include <string.h>
-/*
- * Reads file and returns contents
- * @param	fd	file descriptor
- * @return	contents of file or NULL if an error occurred
- */
-extern char * fd2str(int fd);
-
-/*
- * Reads file and returns contents
- * @param	path	path to file
- * @return	contents of file or NULL if an error occurred
- */
-extern char * file2str(const char *path);
-
-/* 
- * Waits for a file descriptor to become available for reading or unblocked signal
- * @param	fd	file descriptor
- * @param	timeout	seconds to wait before timing out or 0 for no timeout
- * @return	1 if descriptor changed status or 0 if timed out or -1 on error
- */
-extern int waitfor(int fd, int timeout);
-
-/* 
- * Concatenates NULL-terminated list of arguments into a single
- * commmand and executes it
- * @param	argv	argument list
- * @param	path	NULL, ">output", or ">>output"
- * @param	timeout	seconds to wait before timing out or 0 for no timeout
- * @param	ppid	NULL to wait for child termination or pointer to pid
- * @return	return value of executed command or errno
- */
-extern int _eval(char *const argv[], char *path, int timeout, pid_t *ppid);
-
-/* 
- * Concatenates NULL-terminated list of arguments into a single
- * commmand and executes it
- * @param	argv	argument list
- * @return	stdout of executed command or NULL if an error occurred
- */
-extern char * _backtick(char *const argv[]);
-
-/* 
- * Kills process whose PID is stored in plaintext in pidfile
- * @param	pidfile	PID file
- * @return	0 on success and errno on failure
- */
-extern int kill_pidfile(char *pidfile);
-
-/*
- * fread() with automatic retry on syscall interrupt
- * @param	ptr	location to store to
- * @param	size	size of each element of data
- * @param	nmemb	number of elements
- * @param	stream	file stream
- * @return	number of items successfully read
- */
-extern int safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream);
-
-/*
- * fwrite() with automatic retry on syscall interrupt
- * @param	ptr	location to read from
- * @param	size	size of each element of data
- * @param	nmemb	number of elements
- * @param	stream	file stream
- * @return	number of items successfully written
- */
-extern int safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream);
-
-/*
- * Convert Ethernet address string representation to binary data
- * @param	a	string in xx:xx:xx:xx:xx:xx notation
- * @param	e	binary data
- * @return	TRUE if conversion was successful and FALSE otherwise
- */
-extern int ether_atoe(const char *a, unsigned char *e);
-
-/*
- * Convert Ethernet address binary data to string representation
- * @param	e	binary data
- * @param	a	string in xx:xx:xx:xx:xx:xx notation
- * @return	a
- */
-extern char * ether_etoa(const unsigned char *e, char *a);
-
-/*
- * Concatenate two strings together into a caller supplied buffer
- * @param	s1	first string
- * @param	s2	second string
- * @param	buf	buffer large enough to hold both strings
- * @return	buf
- */
-static inline char * strcat_r(const char *s1, const char *s2, char *buf)
-{
-	strcpy(buf, s1);
-	strcat(buf, s2);
-	return buf;
-}	
-
-/* Check for a blank character; that is, a space or a tab */
-#define isblank(c) ((c) == ' ' || (c) == '\t')
-
-/* Strip trailing CR/NL from string <s> */
-#define chomp(s) ({ \
-	char *c = (s) + strlen((s)) - 1; \
-	while ((c > (s)) && (*c == '\n' || *c == '\r' || *c == ' ')) \
-		*c-- = '\0'; \
-	s; \
-})
-
-/* Simple version of _backtick() */
-#define backtick(cmd, args...) ({ \
-	char *argv[] = { cmd, ## args, NULL }; \
-	_backtick(argv); \
-})
-
-/* Simple version of _eval() (no timeout and wait for child termination) */
-#define eval(cmd, args...) ({ \
-	char *argv[] = { cmd, ## args, NULL }; \
-	_eval(argv, ">/dev/console", 0, NULL); \
-})
-
-/* Copy each token in wordlist delimited by space into word */
-#define foreach(word, wordlist, next) \
-	for (next = &wordlist[strspn(wordlist, " ")], \
-	     strncpy(word, next, sizeof(word)), \
-	     word[strcspn(word, " ")] = '\0', \
-	     word[sizeof(word) - 1] = '\0', \
-	     next = strchr(next, ' '); \
-	     strlen(word); \
-	     next = next ? &next[strspn(next, " ")] : "", \
-	     strncpy(word, next, sizeof(word)), \
-	     word[strcspn(word, " ")] = '\0', \
-	     word[sizeof(word) - 1] = '\0', \
-	     next = strchr(next, ' '))
-
-/* Return NUL instead of NULL if undefined */
-#define safe_getenv(s) (getenv(s) ? : "")
-
-/* Print directly to the console */
-#define cprintf(fmt, args...) do { \
-	FILE *fp = fopen("/dev/console", "w"); \
-	if (fp) { \
-		fprintf(fp, fmt, ## args); \
-		fclose(fp); \
-	} \
-} while (0)
-
-/* Debug print */
-#ifdef DEBUG
-#define dprintf(fmt, args...) cprintf("%s: " fmt, __FUNCTION__, ## args)
-#else
-#define dprintf(fmt, args...)
-#endif
-
-#ifdef vxworks
-
-#include <inetLib.h>
-#define inet_aton(a, n) ((inet_aton((a), (n)) == ERROR) ? 0 : 1)
-#define inet_ntoa(n) ({ char a[INET_ADDR_LEN]; inet_ntoa_b ((n), a); a; })
-
-#include <typedefs.h>
-#include <bcmutils.h>
-#define ether_atoe(a, e) bcm_ether_atoe((a), (e))
-#define ether_etoa(e, a) bcm_ether_ntoa((e), (a))
-
-/* These declarations are not available where you would expect them */
-extern int vsnprintf (char *, size_t, const char *, va_list);
-extern int snprintf(char *str, size_t count, const char *fmt, ...);
-extern char *strdup(const char *);
-extern char *strsep(char **stringp, char *delim);
-extern int strcasecmp(const char *s1, const char *s2); 
-extern int strncasecmp(const char *s1, const char *s2, size_t n); 
-
-/* Neither are socket() and connect() */
-#include <sockLib.h>
-
-#ifdef DEBUG
-#undef dprintf
-#define dprintf printf
-#endif
-#endif
-
-#endif /* _shutils_h_ */
diff --git a/openwrt/target/linux/package/base-files/include/typedefs.h b/openwrt/target/linux/package/base-files/include/typedefs.h
deleted file mode 100644
index 6b0c25e042..0000000000
--- a/openwrt/target/linux/package/base-files/include/typedefs.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * Copyright 2004, Broadcom Corporation      
- * All Rights Reserved.      
- *       
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
- * $Id$
- */
-
-#ifndef _TYPEDEFS_H_
-#define _TYPEDEFS_H_
-
-
-/* Define 'SITE_TYPEDEFS' in the compile to include a site specific
- * typedef file "site_typedefs.h".
- *
- * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs"
- * section of this file makes inferences about the compile environment
- * based on defined symbols and possibly compiler pragmas.
- *
- * Following these two sections is the "Default Typedefs"
- * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is
- * defined. This section has a default set of typedefs and a few
- * proprocessor symbols (TRUE, FALSE, NULL, ...).
- */
-
-#ifdef SITE_TYPEDEFS
-
-/*******************************************************************************
- * Site Specific Typedefs
- *******************************************************************************/
-
-#include "site_typedefs.h"
-
-#else
-
-/*******************************************************************************
- * Inferred Typedefs
- *******************************************************************************/
-
-/* Infer the compile environment based on preprocessor symbols and pramas.
- * Override type definitions as needed, and include configuration dependent
- * header files to define types.
- */
-
-#ifdef __cplusplus
-
-#define TYPEDEF_BOOL
-#ifndef FALSE
-#define FALSE	false
-#endif
-#ifndef TRUE
-#define TRUE	true
-#endif
-
-#else	/* ! __cplusplus */
-
-/* for Windows build, define bool as a uchar instead of the default int */
-#if defined(_WIN32)
-
-#define TYPEDEF_BOOL
-typedef	unsigned char	bool;
-
-#endif /* _WIN32 */
-
-#endif	/* ! __cplusplus */
-
-#ifdef _MSC_VER	    /* Microsoft C */
-#define TYPEDEF_INT64
-#define TYPEDEF_UINT64
-typedef signed __int64	int64;
-typedef unsigned __int64 uint64;
-#endif
-
-#if defined(MACOSX) && defined(KERNEL)
-#define TYPEDEF_BOOL
-#endif
-
-
-#if defined(linux)
-#define TYPEDEF_UINT
-#define TYPEDEF_USHORT
-#define TYPEDEF_ULONG
-#endif
-
-#if !defined(linux) && !defined(_WIN32) && !defined(PMON) && !defined(_CFE_)
-#define TYPEDEF_UINT
-#define TYPEDEF_USHORT
-#endif
-
-
-/* Do not support the (u)int64 types with strict ansi for GNU C */
-#if defined(__GNUC__) && defined(__STRICT_ANSI__)
-#define TYPEDEF_INT64
-#define TYPEDEF_UINT64
-#endif
-
-/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode
- * for singned or unsigned */
-#if defined(__ICL)
-
-#define TYPEDEF_INT64
-
-#if defined(__STDC__)
-#define TYPEDEF_UINT64
-#endif
-
-#endif /* __ICL */
-
-
-#if !defined(_WIN32) && !defined(PMON) && !defined(_CFE_)
-
-/* pick up ushort & uint from standard types.h */
-#if defined(linux) && defined(__KERNEL__)
-
-#include <linux/types.h>	/* sys/types.h and linux/types.h are oil and water */
-
-#else
-
-#include <sys/types.h>	
-
-#endif
-
-#endif /* !_WIN32 && !PMON && !_CFE_ */
-
-#if defined(MACOSX) && defined(KERNEL)
-#include <IOKit/IOTypes.h>
-#endif
-
-
-/* use the default typedefs in the next section of this file */
-#define USE_TYPEDEF_DEFAULTS
-
-#endif /* SITE_TYPEDEFS */
-
-
-/*******************************************************************************
- * Default Typedefs
- *******************************************************************************/
-
-#ifdef USE_TYPEDEF_DEFAULTS
-#undef USE_TYPEDEF_DEFAULTS
-
-#ifndef TYPEDEF_BOOL
-typedef	int	bool;
-#endif
-
-/*----------------------- define uchar, ushort, uint, ulong ----------------*/
-
-#ifndef TYPEDEF_UCHAR
-typedef unsigned char	uchar;
-#endif
-
-#ifndef TYPEDEF_USHORT
-typedef unsigned short	ushort;
-#endif
-
-#ifndef TYPEDEF_UINT
-typedef unsigned int	uint;
-#endif
-
-#ifndef TYPEDEF_ULONG
-typedef unsigned long	ulong;
-#endif
-
-/*----------------------- define [u]int8/16/32/64 --------------------------*/
-
-#ifndef TYPEDEF_UINT8
-typedef unsigned char	uint8;
-#endif
-
-#ifndef TYPEDEF_UINT16
-typedef unsigned short	uint16;
-#endif
-
-#ifndef TYPEDEF_UINT32
-typedef unsigned int	uint32;
-#endif
-
-#ifndef TYPEDEF_UINT64
-typedef unsigned long long uint64;
-#endif
-
-#ifndef TYPEDEF_INT8
-typedef signed char	int8;
-#endif
-
-#ifndef TYPEDEF_INT16
-typedef signed short	int16;
-#endif
-
-#ifndef TYPEDEF_INT32
-typedef signed int	int32;
-#endif
-
-#ifndef TYPEDEF_INT64
-typedef signed long long int64;
-#endif
-
-/*----------------------- define float32/64, float_t -----------------------*/
-
-#ifndef TYPEDEF_FLOAT32
-typedef float		float32;
-#endif
-
-#ifndef TYPEDEF_FLOAT64
-typedef double		float64;
-#endif
-
-/*
- * abstracted floating point type allows for compile time selection of
- * single or double precision arithmetic.  Compiling with -DFLOAT32
- * selects single precision; the default is double precision.
- */
-
-#ifndef TYPEDEF_FLOAT_T
-
-#if defined(FLOAT32)
-typedef float32 float_t;
-#else /* default to double precision floating point */
-typedef float64 float_t;
-#endif
-
-#endif /* TYPEDEF_FLOAT_T */
-
-/*----------------------- define macro values -----------------------------*/
-
-#ifndef FALSE
-#define FALSE	0
-#endif
-
-#ifndef TRUE
-#define TRUE	1
-#endif
-
-#ifndef NULL
-#define	NULL	0
-#endif
-
-#ifndef OFF
-#define	OFF	0
-#endif
-
-#ifndef ON
-#define	ON	1
-#endif
-
-/*----------------------- define PTRSZ, INLINE ----------------------------*/
-
-#ifndef PTRSZ
-#define	PTRSZ	sizeof (char*)
-#endif
-
-#ifndef INLINE
-
-#ifdef _MSC_VER
-
-#define INLINE __inline
-
-#elif __GNUC__
-
-#define INLINE __inline__
-
-#else
-
-#define INLINE
-
-#endif /* _MSC_VER */
-
-#endif /* INLINE */
-
-#undef TYPEDEF_BOOL
-#undef TYPEDEF_UCHAR
-#undef TYPEDEF_USHORT
-#undef TYPEDEF_UINT
-#undef TYPEDEF_ULONG
-#undef TYPEDEF_UINT8
-#undef TYPEDEF_UINT16
-#undef TYPEDEF_UINT32
-#undef TYPEDEF_UINT64
-#undef TYPEDEF_INT8
-#undef TYPEDEF_INT16
-#undef TYPEDEF_INT32
-#undef TYPEDEF_INT64
-#undef TYPEDEF_FLOAT32
-#undef TYPEDEF_FLOAT64
-#undef TYPEDEF_FLOAT_T
-
-#endif /* USE_TYPEDEF_DEFAULTS */
-
-#endif /* _TYPEDEFS_H_ */
diff --git a/openwrt/target/linux/package/base-files/include/utils.h b/openwrt/target/linux/package/base-files/include/utils.h
deleted file mode 100644
index b8d1cdb7bf..0000000000
--- a/openwrt/target/linux/package/base-files/include/utils.h
+++ /dev/null
@@ -1,131 +0,0 @@
-#include <cy_conf.h>
-
-extern int diag_led(int type, int act);
-extern int C_led(int i);
-extern int get_single_ip(char *ipaddr, int which);
-extern char *get_mac_from_ip(char *ip);
-extern struct dns_lists *get_dns_list(int no);
-extern int dns_to_resolv(void);
-extern char *get_wan_face(void);
-extern int check_wan_link(int num);
-extern char *get_complete_lan_ip(char *ip);
-extern int get_int_len(int num);
-extern int file_to_buf(char *path, char *buf, int len);
-extern int buf_to_file(char *path, char *buf);
-extern pid_t* find_pid_by_name( char* pidName);
-extern int find_pid_by_ps(char* pidName);
-extern int *find_all_pid_by_ps(char* pidName);
-extern char *find_name_by_proc(int pid);
-extern int get_ppp_pid(char *file);
-extern long convert_ver(char *ver);
-extern int check_flash(void);
-extern int check_action(void);
-extern int check_now_boot(void);
-extern int check_hw_type(void);
-extern int is_exist(char *filename);
-extern void set_ip_forward(char c);
-struct mtu_lists *get_mtu(char *proto);
-extern void set_host_domain_name(void);
-
-extern void encode(char *buf, int len);
-extern void decode(char *buf, int len);
-
-extern int sys_netdev_ioctl(int family, int socket, char *if_name, int cmd, struct ifreq *ifr);
-
-int ct_openlog(const char *ident, int option, int facility, char *log_name);
-void ct_syslog(int level, int enable, const char *fmt,...);
-void ct_logger(int level, const char *fmt,...);
-struct wl_assoc_mac * get_wl_assoc_mac(int *c);
-	
-
-
-enum { DMZ, SESSION, DIAG , WL};
-
-enum { START_LED, STOP_LED };
-
-typedef enum { ACT_IDLE, 
-	       ACT_TFTP_UPGRADE, 
-	       ACT_WEB_UPGRADE, 
-	       ACT_WEBS_UPGRADE, 
-	       ACT_SW_RESTORE, 
-	       ACT_HW_RESTORE } ACTION;
-
-enum { UNKNOWN_BOOT = -1, PMON_BOOT, CFE_BOOT };
-
-enum { BCM4702_CHIP, BCM4712_CHIP, BCM5325E_CHIP };
-
-enum { FIRST, SECOND };
-
-enum { SYSLOG_LOG=1, SYSLOG_DEBUG, CONSOLE_ONLY, LOG_CONSOLE, DEBUG_CONSOLE };
-
-#define ACTION(cmd)	buf_to_file(ACTION_FILE, cmd)
-
-struct dns_lists {
-        int num_servers;
-        char dns_server[4][16];
-};
-
-#define NOT_USING	0
-#define USING		1
-
-struct wl_assoc_mac
-{
-	char mac[18];
-};
-
-struct mtu_lists {
-        char	*proto;	/* protocol */
-        char	*min;	/* min mtu */
-        char	*max;	/* max mtu */
-};
-
-
-#define PPP_PSEUDO_IP	"10.64.64.64"
-#define PPP_PSEUDO_NM	"255.255.255.255"
-#define PPP_PSEUDO_GW	"10.112.112.112"
-
-#define PING_TMP	"/tmp/ping.log"
-#define TRACEROUTE_TMP	"/tmp/traceroute.log"
-#define MAX_BUF_LEN	254
-
-#define RESOLV_FILE	"/tmp/resolv.conf"
-#define HOSTS_FILE	"/tmp/hosts"
-
-#define LOG_FILE	"/var/log/mess"
-
-#define ACTION_FILE	"/tmp/action"
-
-
-#define split(word, wordlist, next, delim) \
-	for (next = wordlist, \
-	     strncpy(word, next, sizeof(word)), \
-	     word[(next=strstr(next, delim)) ? strstr(word, delim) - word : sizeof(word) - 1] = '\0', \
-	     next = next ? next + sizeof(delim) - 1 : NULL ; \
-	     strlen(word); \
-	     next = next ? : "", \
-	     strncpy(word, next, sizeof(word)), \
-	     word[(next=strstr(next, delim)) ? strstr(word, delim) - word : sizeof(word) - 1] = '\0', \
-	     next = next ? next + sizeof(delim) - 1 : NULL)
-
-#define STRUCT_LEN(name)    sizeof(name)/sizeof(name[0])
-
-#define printHEX(str,len) { \
-	int i; \
-	for (i=0 ; i<len ; i++) { \
-		printf("%02X ", (unsigned char)*(str+i)); \
-		if(((i+1)%16) == 0) printf("- "); \
-		if(((i+1)%32) == 0) printf("\n"); \
-	} \
-	printf("\n\n"); \
-}
-
-
-#define printASC(str,len) { \
-	int i; \
-	for (i=0 ; i<len ; i++) { \
-		printf("%c", (unsigned char)*(str+i)); \
-		if(((i+1)%16) == 0) printf("- "); \
-		if(((i+1)%32) == 0) printf("\n"); \
-	} \
-	printf("\n\n"); \
-}
diff --git a/openwrt/target/linux/package/base-files/include/wlcompat.h b/openwrt/target/linux/package/base-files/include/wlcompat.h
deleted file mode 100644
index a4fc13439d..0000000000
--- a/openwrt/target/linux/package/base-files/include/wlcompat.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * wlcompat.h
- *
- * Copyright (C) 2005 Felix Fietkau <nbd@vd-s.ath.cx>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * $Id$
- */
-#include <linux/wireless.h>
-
-#ifndef WLCOMPAT_H
-#define WLCOMPAT_H
-
-#define WLCOMPAT_SET_MONITOR		SIOCIWFIRSTPRIV + 0
-#define WLCOMPAT_GET_MONITOR		SIOCIWFIRSTPRIV + 1
-#define WLCOMPAT_SET_TXPWR_LIMIT	SIOCIWFIRSTPRIV + 2
-#define WLCOMPAT_GET_TXPWR_LIMIT	SIOCIWFIRSTPRIV + 3
-#define WLCOMPAT_SET_ANTDIV		SIOCIWFIRSTPRIV + 4
-#define WLCOMPAT_GET_ANTDIV		SIOCIWFIRSTPRIV + 5
-#define WLCOMPAT_SET_TXANT		SIOCIWFIRSTPRIV + 6
-#define WLCOMPAT_GET_TXANT		SIOCIWFIRSTPRIV + 7
-
-#endif
diff --git a/openwrt/target/linux/package/base-files/include/wlioctl.h b/openwrt/target/linux/package/base-files/include/wlioctl.h
deleted file mode 100644
index 66783cc44d..0000000000
--- a/openwrt/target/linux/package/base-files/include/wlioctl.h
+++ /dev/null
@@ -1,1097 +0,0 @@
-/*
- * Custom OID/ioctl definitions for
- * Broadcom 802.11abg Networking Device Driver
- *
- * Definitions subject to change without notice.
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#ifndef _wlioctl_h_
-#define	_wlioctl_h_
-
-#include <typedefs.h>
-#include <proto/ethernet.h>
-#include <proto/802.11.h>
-
-#if defined(__GNUC__)
-#define	PACKED	__attribute__((packed))
-#else
-#define	PACKED
-#endif
-
-#define WLC_ESSID_MAX_SIZE	32
-
-#define WL_NUMRATES		255	/* max # of rates in a rateset */
-
-typedef struct wl_rateset {
-	uint32	count;			/* # rates in this set */
-	uint8	rates[WL_NUMRATES];	/* rates in 500kbps units w/hi bit set if basic */
-} wl_rateset_t;
-
-#define WL_CHANSPEC_CHAN_MASK	0x0fff
-#define WL_CHANSPEC_BAND_MASK	0xf000
-#define WL_CHANSPEC_BAND_SHIFT	12
-#define WL_CHANSPEC_BAND_A	0x1000
-#define WL_CHANSPEC_BAND_B	0x2000
-
-/*
- * Per-bss information structure.
- */
-
-#define	WL_LEGACY_BSS_INFO_VERSION	106	/* an older supported version of wl_bss_info struct */
-#define	WL_BSS_INFO_VERSION		107	/* current version of wl_bss_info struct */
-
-typedef struct wl_bss_info106 {
-	uint		version;	/* version field */
-	struct ether_addr BSSID;
-	uint8		SSID_len;
-	uint8		SSID[32];
-	uint8		Privacy;	/* 0=No WEP, 1=Use WEP */
-	int16		RSSI;		/* receive signal strength (in dBm) */
-	uint16		beacon_period;	/* units are Kusec */
-	uint16		atim_window;	/* units are Kusec */
-	uint8		channel;	/* Channel no. */
-	int8		infra;		/* 0=IBSS, 1=infrastructure, 2=unknown */
-	struct {
-		uint	count;		/* # rates in this set */
-		uint8	rates[12];	/* rates in 500kbps units w/hi bit set if basic */
-	} rateset;			/* supported rates */
-        uint8           dtim_period;    /* DTIM period */
-	int8		phy_noise;	/* noise right after tx (in dBm) */
-	uint16		capability;	/* Capability information */
-	struct dot11_bcn_prb *prb;	/* probe response frame (ioctl na) */
-	uint16		prb_len;	/* probe response frame length (ioctl na) */
-	struct {
-		uint8 supported;	/* wpa supported */
-		uint8 multicast;	/* multicast cipher */
-		uint8 ucount;		/* count of unicast ciphers */
-		uint8 unicast[4];	/* unicast ciphers */
-		uint8 acount;		/* count of auth modes */
-		uint8 auth[4];		/* Authentication modes */
-	} wpa;
-} wl_bss_info106_t;
-
-typedef struct wl_bss_info {
-	uint32		version;	/* version field */
-	uint32		length;		/* byte length of data in this record, starting at version and including IEs */
-	struct ether_addr BSSID;
-	uint16		beacon_period;	/* units are Kusec */
-	uint16		capability;	/* Capability information */
-	uint8		SSID_len;
-	uint8		SSID[32];
-	struct {
-		uint	count;		/* # rates in this set */
-		uint8	rates[16];	/* rates in 500kbps units w/hi bit set if basic */
-	} rateset;			/* supported rates */
-	uint8		channel;	/* Channel no. */
-	uint16		atim_window;	/* units are Kusec */
-        uint8           dtim_period;    /* DTIM period */
-	int16		RSSI;		/* receive signal strength (in dBm) */
-	int8		phy_noise;	/* noise (in dBm) */
-	uint32		ie_length;	/* byte length of Information Elements */
-	/* variable length Information Elements */
-} wl_bss_info_t;
-
-typedef struct wlc_ssid {
-	uint32		SSID_len;
-	uchar		SSID[32];
-} wlc_ssid_t;
-
-typedef struct wl_scan_params {
-	wlc_ssid_t ssid;	/* default is {0, ""} */
-	struct ether_addr bssid;/* default is bcast */
-	int8 bss_type;		/* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */
-	int8 scan_type;		/* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
-	int32 nprobes;		/* -1 use default, number of probes per channel */
-	int32 active_time;	/* -1 use default, dwell time per channel for active scanning */
-	int32 passive_time;	/* -1 use default, dwell time per channel for passive scanning */
-	int32 home_time;	/* -1 use default, dwell time for the home channel between channel scans */
-	int32 channel_num;	/* 0 use default (all available channels), count of channels in channel_list */
-	uint16 channel_list[1];	/* list of chanspecs */
-} wl_scan_params_t;
-/* size of wl_scan_params not including variable length array */
-#define WL_SCAN_PARAMS_FIXED_SIZE 64
-
-typedef struct wl_scan_results {
-	uint32 buflen;
-	uint32 version;
-	uint32 count;
-	wl_bss_info_t bss_info[1];
-} wl_scan_results_t;
-/* size of wl_scan_results not including variable length array */
-#define WL_SCAN_RESULTS_FIXED_SIZE 12
-
-/* uint32 list */
-typedef struct wl_uint32_list {
-	/* in - # of elements, out - # of entries */
-	uint32 count;
-	/* variable length uint32 list */
-	uint32 element[1];
-} wl_uint32_list_t;
-
-#define WLC_CNTRY_BUF_SZ        4       /* Country string is 3 bytes + NULL */
-
-typedef struct wl_channels_in_country {
-	uint32 buflen;
-	uint32 band;
-	char country_abbrev[WLC_CNTRY_BUF_SZ];
-	uint32 count;
-	uint32 channel[1];
-} wl_channels_in_country_t;
-
-typedef struct wl_country_list {
-	uint32 buflen;
-	uint32 band_set;
-	uint32 band;
-	uint32 count;
-	char country_abbrev[1];
-} wl_country_list_t;
-
-#define WL_RM_TYPE_BASIC	1
-#define WL_RM_TYPE_CCA		2
-#define WL_RM_TYPE_RPI		3
-
-#define WL_RM_FLAG_PARALLEL	(1<<0)
-
-#define WL_RM_FLAG_LATE		(1<<1)
-#define WL_RM_FLAG_INCAPABLE	(1<<2)
-#define WL_RM_FLAG_REFUSED	(1<<3)
-
-typedef struct wl_rm_req_elt {
-	int8	type;
-	int8	flags;
-	uint16	chanspec;
-	uint32	token;		/* token for this measurement */
-	uint32	tsf_h;		/* TSF high 32-bits of Measurement start time */
-	uint32	tsf_l;		/* TSF low 32-bits */
-	uint32	dur;		/* TUs */
-} wl_rm_req_elt_t;
-
-typedef struct wl_rm_req {
-	uint32	token;		/* overall measurement set token */
-	uint32	count;		/* number of measurement reqests */
-	wl_rm_req_elt_t	req[1];	/* variable length block of requests */
-} wl_rm_req_t;
-#define WL_RM_REQ_FIXED_LEN	8
-
-typedef struct wl_rm_rep_elt {
-	int8	type;
-	int8	flags;
-	uint16	chanspec;
-	uint32	token;		/* token for this measurement */
-	uint32	tsf_h;		/* TSF high 32-bits of Measurement start time */
-	uint32	tsf_l;		/* TSF low 32-bits */
-	uint32	dur;		/* TUs */
-	uint32	len;		/* byte length of data block */
-	uint8	data[1];	/* variable length data block */
-} wl_rm_rep_elt_t;
-#define WL_RM_REP_ELT_FIXED_LEN	24	/* length excluding data block */
-
-#define WL_RPI_REP_BIN_NUM 8
-typedef struct wl_rm_rpi_rep {
-	uint8	rpi[WL_RPI_REP_BIN_NUM];
-	int8	rpi_max[WL_RPI_REP_BIN_NUM];
-} wl_rm_rpi_rep_t;
-
-typedef struct wl_rm_rep {
-	uint32	token;		/* overall measurement set token */
-	uint32	len;		/* length of measurement report block */
-	wl_rm_rep_elt_t	rep[1];	/* variable length block of reports */
-} wl_rm_rep_t;
-#define WL_RM_REP_FIXED_LEN	8
-
-
-#define WLC_MAX_KEY_SIZE	32	/* max size of any key */
-#define WLC_MAX_IV_SIZE		16	/* max size of any IV */
-#define WLC_EXT_IV_FLAG		(1<<5)	/* flag to indicate IV is > 4 bytes */
-#define WLC_MAX_DEFAULT_KEYS	4	/* # of default WEP keys */
-#define WLC_MAX_KEYS		54	/* Max # of WEP keys */
-#define WLC_WEP1_KEY_SIZE	5	/* max size of any WEP key */
-#define WLC_WEP1_KEY_HEX_SIZE	10	/* size of WEP key in hex. */
-#define WLC_WEP128_KEY_SIZE	13	/* max size of any WEP key */
-#define WLC_WEP128_KEY_HEX_SIZE	26	/* size of WEP key in hex. */
-#define WLC_TKIP_MIC_SIZE	8	/* size of TKIP MIC */
-#define WLC_TKIP_EOM_SIZE	7	/* max size of TKIP EOM */
-#define WLC_TKIP_EOM_FLAG	0x5a	/* TKIP EOM flag byte */
-#define WLC_TKIP_KEY_SIZE	32	/* size of any TKIP key */
-#define WLC_TKIP_MIC_AUTH_TX	16	/* offset to Authenticator MIC TX key */
-#define WLC_TKIP_MIC_AUTH_RX	24	/* offset to Authenticator MIC RX key */
-#define WLC_TKIP_MIC_SUP_RX	16	/* offset to Supplicant MIC RX key */
-#define WLC_TKIP_MIC_SUP_TX	24	/* offset to Supplicant MIC TX key */
-#define WLC_TKIP_P1_KEY_SIZE	10	/* size of TKHash Phase1 output, in bytes */
-#define WLC_TKIP_P2_KEY_SIZE	16	/* size of TKHash Phase2 output */
-#define WLC_AES_KEY_SIZE	16	/* size of AES key */
-
-
-typedef enum sup_auth_status {
-	WLC_SUP_DISCONNECTED = 0,
-	WLC_SUP_CONNECTING,
-	WLC_SUP_IDREQUIRED,
-	WLC_SUP_AUTHENTICATING,
-	WLC_SUP_AUTHENTICATED,
-	WLC_SUP_KEYXCHANGE,
-	WLC_SUP_KEYED
-} sup_auth_status_t;
-
-/* Enumerate crypto algorithms */
-#define	CRYPTO_ALGO_OFF			0
-#define	CRYPTO_ALGO_WEP1		1
-#define	CRYPTO_ALGO_TKIP		2
-#define	CRYPTO_ALGO_WEP128		3
-#define CRYPTO_ALGO_AES_CCM		4
-#define CRYPTO_ALGO_AES_OCB_MSDU	5
-#define CRYPTO_ALGO_AES_OCB_MPDU	6
-#define CRYPTO_ALGO_NALG		7
-
-#define WSEC_GEN_MIC_ERROR	0x0001
-#define WSEC_GEN_REPLAY		0x0002
-
-#define WL_SOFT_KEY	(1 << 0)	/* Indicates this key is using soft encrypt */
-#define WL_PRIMARY_KEY	(1 << 1)	/* Indicates this key is the primary (ie tx) key */
-#define WL_KF_RES_4	(1 << 4)	/* Reserved for backward compat */
-#define WL_KF_RES_5	(1 << 5)	/* Reserved for backward compat */
-
-
-typedef struct wlc_tkip_info {
-	uint16		phase1[WLC_TKIP_P1_KEY_SIZE/sizeof(uint16)];	/* tkhash phase1 result */
-	uint8		phase2[WLC_TKIP_P2_KEY_SIZE];	/* tkhash phase2 result */
-	uint32		micl;
-	uint32		micr;
-} tkip_info_t;
-
-typedef struct _wsec_iv {
-	uint32		hi;	/* upper 32 bits of IV */
-	uint16		lo;	/* lower 16 bits of IV */
-} wsec_iv_t;
-
-typedef struct wsec_key {
-	uint32		index;		/* key index */
-	uint32		len;		/* key length */
-	uint8		data[WLC_MAX_KEY_SIZE];	/* key data */
-	tkip_info_t	tkip_tx;	/* tkip transmit state */
-	tkip_info_t	tkip_rx;	/* tkip receive state */
-	uint32		algo;		/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
-	uint32		flags;		/* misc flags */
-	uint32 		algo_hw;	/* cache for hw register*/
-	uint32 		aes_mode;	/* cache for hw register*/
-	int		iv_len;		/* IV length */		
-	int		iv_initialized;	/* has IV been initialized already? */		
-	int		icv_len;	/* ICV length */
-	wsec_iv_t	rxiv;		/* Rx IV */
-	wsec_iv_t	txiv;		/* Tx IV */
-	struct ether_addr ea;		/* per station */
-} wsec_key_t;
-
-
-
-typedef struct wl_wsec_key {
-	uint32		index;		/* key index */
-	uint32		len;		/* key length */
-	uint8		data[DOT11_MAX_KEY_SIZE];	/* key data */
-	uint32		pad_1[18];
-	uint32		algo;		/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
-	uint32		flags;		/* misc flags */
-	uint32 		pad_2[2];
-	int		pad_3;
-	int		iv_initialized;	/* has IV been initialized already? */		
-	int		pad_4;
-	/* Rx IV */
-	struct {
-		uint32	hi;		/* upper 32 bits of IV */
-		uint16	lo;		/* lower 16 bits of IV */
-	} rxiv;
-	uint32		pad_5[2];
-	struct ether_addr ea;		/* per station */
-} wl_wsec_key_t;
-
-/* For use with wlc_wep_key.flags */
-#define WSEC_PRIMARY_KEY	(1 << 1)	/* Indicates this key is the primary (ie tx) key */
-#define WSEC_TKIP_ERROR		(1 << 2)	/* Provoke deliberate error */
-
-#define WSEC_MIN_PSK_LEN	8
-#define WSEC_MAX_PSK_LEN	64
-
-/* Flag for key material needing passhash'ing */
-#define WSEC_PASSPHRASE		(1<<0)
-
-/* recepticle for WLC_SET_WSEC_PMK parameter */
-typedef struct {
-	ushort	key_len;		/* octets in key material */
-	ushort	flags;			/* key handling qualification */
-	uint8	key[WSEC_MAX_PSK_LEN];	/* PMK material */
-} wsec_pmk_t;
-
-/* wireless security bitvec */
-#define WEP_ENABLED		1
-#define TKIP_ENABLED		2
-#define AES_ENABLED		4
-#define WSEC_SWFLAG		8
-
-#define WSEC_SW(wsec)		((wsec) & WSEC_SWFLAG)
-#define WSEC_HW(wsec)		(!WSEC_SW(wsec))
-#define WSEC_WEP_ENABLED(wsec)	((wsec) & WEP_ENABLED)
-#define WSEC_TKIP_ENABLED(wsec)	((wsec) & TKIP_ENABLED)
-#define WSEC_AES_ENABLED(wsec)	((wsec) & AES_ENABLED)
-#define WSEC_ENABLED(wsec)	((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))
-
-
-/* wireless authentication bit vector */
-#define WPA_ENABLED	1
-#define PSK_ENABLED	2
-
-#define WAUTH_WPA_ENABLED(wauth)	((wauth) & WPA_ENABLED)
-#define WAUTH_PSK_ENABLED(wauth)	((wauth) & PSK_ENABLED)
-#define WAUTH_ENABLED(wauth)		((wauth) & (WPA_ENABLED | PSK_ENABLED))
-
-/* group/mcast cipher */
-#define WPA_MCAST_CIPHER(wsec)	(((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \
-				((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \
-				WPA_CIPHER_NONE)
-
-
-typedef struct wl_led_info {
-	uint32		index;		/* led index */
-	uint32		behavior;
-	bool		activehi;
-} wl_led_info_t;
-
-/*
- * definitions for driver messages passed from WL to NAS.
- */
-/* Use this to recognize wpa and 802.1x driver messages. */
-static const uint8 wl_wpa_snap_template[] =
-	{ 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
-
-#define WL_WPA_MSG_IFNAME_MAX	16
-
-/* WPA driver message */
-typedef struct wl_wpa_header {
-	struct ether_header eth;
-	struct dot11_llc_snap_header snap;
-	uint8 version;
-	uint8 type;
-	/* version 2 additions */
-	char ifname[WL_WPA_MSG_IFNAME_MAX];
-	/* version specific data */
-	/* uint8 data[1]; */
-} wl_wpa_header_t PACKED;
-
-/*
- * definitions for 802.2 messages passed from WL to NAS.
- */
-/* This seems not to be defined outside the kernel on linux. */
-#ifndef ETH_P_802_2
-#define ETH_P_802_2		4
-#endif
-
-#define WL_WPA_HEADER_LEN	(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
-
-/* WPA driver message ethertype - private between wlc and nas */
-#define WL_WPA_ETHER_TYPE	0x9999
-
-/* WPA driver message current version */
-#define WL_WPA_MSG_VERSION	2
-
-/* Type field values for the 802.2 driver messages for WPA. */
-#define WLC_ASSOC_MSG		1
-#define WLC_DISASSOC_MSG	2
-#define WLC_PTK_MIC_MSG		3
-#define WLC_GTK_MIC_MSG		4
-
-/* Use this to recognize 802.2 driver messages. */
-static const uint8 wpa_snap_template[] =
-	{ 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
-
-
-/* 802.1x driver message */
-typedef struct wl_eapol_header {
-	struct ether_header eth;
-	struct dot11_llc_snap_header snap;
-	uint8 version;
-	uint8 reserved;
-	char ifname[WL_WPA_MSG_IFNAME_MAX];
-	/* version specific data */
-	/* uint8 802_1x_msg[1]; */
-} wl_eapol_header_t PACKED;
-
-#define WL_EAPOL_HEADER_LEN	(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
-
-/* 802.1x driver message ethertype - private between wlc and nas */
-#define WL_EAPOL_ETHER_TYPE	0x999A
-
-/* 802.1x driver message current version */
-#define WL_EAPOL_MSG_VERSION	1
-
-/* srom read/write struct passed through ioctl */
-typedef struct {
-	uint   byteoff;		/* byte offset */
-	uint   nbytes;		/* number of bytes */
-	uint16 buf[1];
-} srom_rw_t;
-
-/* R_REG and W_REG struct passed through ioctl */
-typedef struct {
-	uint32	byteoff;	/* byte offset of the field in d11regs_t */
-	uint32	val;		/* read/write value of the field */
-	uint32	size;		/* sizeof the field */
-} rw_reg_t;
-
-/* Structure used by GET/SET_ATTEN ioctls */
-typedef struct {
-	uint16	auto_ctrl;	/* 1: Automatic control, 0: overriden */
-	uint16	bb;		/* Baseband attenuation */
-	uint16	radio;		/* Radio attenuation */
-	uint16	txctl1;		/* Radio TX_CTL1 value */
-} atten_t;
-
-/* Used to get specific STA parameters */ 
-typedef struct {
-	uint32	val;
-	struct ether_addr ea;
-} scb_val_t;
-
-/* callback registration data types */
-
-typedef struct _mac_event_params {
-	uint msg;
-	struct ether_addr *addr;
-	uint result;
-	uint status; 
-	uint auth_type;
-} mac_event_params_t;
-
-typedef struct _mic_error_params {
-	struct ether_addr *ea;
-	bool group;
-	bool flush_txq;
-} mic_error_params_t;
-
-typedef enum _wl_callback {
-	WL_MAC_EVENT_CALLBACK = 0,
-	WL_LINK_UP_CALLBACK,
-	WL_LINK_DOWN_CALLBACK,
-	WL_MIC_ERROR_CALLBACK,
-	WL_LAST_CALLBACK
-} wl_callback_t;
-
-typedef struct _callback {
-	void (*fn)(void *, void *);
-	void *context;
-} callback_t;
-
-typedef struct _scan_callback {
-	void (*fn)(void *);
-	void *context;
-} scan_callback_t;
-
-/* used to register an arbitrary callback via the IOCTL interface */
-typedef struct _set_callback {
-	int index;
-	callback_t callback;
-} set_callback_t;
-
-
-
-/* Event data type */
-typedef struct {
-	uint msg;			/* Message (see below) */
-	struct ether_addr *addr;	/* Station address (if applicable) */
-	uint status;			/* Status code (see below) */
-	uint reason;			/* Reason code (if applicable) */
-	uint auth_type;			/* WLC_E_AUTH */
-	bool link;			/* WLC_E_LINK */
-	bool group;			/* WLC_E_MIC_ERROR */
-	bool flush_txq;			/* WLC_E_MIC_ERROR */
-} wlc_event_t;
-
-typedef struct {
-	uint16		ver;	/* version of this struct */
-	uint16		cap;	/* sta's advertized capabilities */
-	uint32 		flags;	/* flags defined below */
-	uint32		idle;	/* time since data pkt rx'd from sta */
-	struct ether_addr	ea;	/* Station address */
-	wl_rateset_t	rateset;	/* rateset in use */
-} sta_info_t;
-
-#define WL_STA_INFO_LEN	300
-#define WL_STA_VER	1
-
-/* flags fields */
-#define WL_STA_BRCM	0x01
-#define WL_STA_WME	0x02
-#define WL_STA_ABCAP	0x04
-#define WL_STA_AUTHE	0x08 
-#define WL_STA_ASSOC	0x10 
-#define WL_STA_AUTHO	0x20 
-
-/* Event messages */
-#define WLC_E_SET_SSID		1
-#define WLC_E_JOIN		2
-#define WLC_E_START		3
-#define WLC_E_AUTH		4
-#define WLC_E_AUTH_IND		5
-#define WLC_E_DEAUTH		6
-#define WLC_E_DEAUTH_IND	7
-#define WLC_E_ASSOC		8
-#define WLC_E_ASSOC_IND		9
-#define WLC_E_REASSOC		10
-#define WLC_E_REASSOC_IND	11
-#define WLC_E_DISASSOC		12
-#define WLC_E_DISASSOC_IND	13
-#define WLC_E_QUIET_START	14	/* 802.11h Quiet period started */
-#define WLC_E_QUIET_END		15	/* 802.11h Quiet period ended */
-#define WLC_E_GOT_BEACONS	16	
-#define WLC_E_LINK		17	/* Link indication */
-#define WLC_E_MIC_ERROR		18	/* TKIP MIC error occurred */
-#define WLC_E_NDIS_LINK		19	/* NDIS style link indication */
-#define WLC_E_ROAM		20
-#define WLC_E_LAST		21
-
-/* Event status codes */
-#define WLC_E_STATUS_SUCCESS		0
-#define WLC_E_STATUS_FAIL		1
-#define WLC_E_STATUS_TIMEOUT		2
-#define WLC_E_STATUS_NO_NETWORKS	3
-#define WLC_E_STATUS_ABORT		4
-
-typedef struct wlc_event_cb {
-	uint msg;				/* Event message or 0 for all */
-	void (*fn)(void *, wlc_event_t *);	/* Callback function */
-	void *context;				/* Passed to callback function */
-	struct wlc_event_cb *next;		/* Next in the chain */
-} wlc_event_cb_t;
-
-/*
- * Country locale determines which channels are available to us.
- */
-typedef enum _wlc_locale {
-	WLC_WW = 0,	/* Worldwide */
-	WLC_THA,	/* Thailand */
-	WLC_ISR,	/* Israel */
-	WLC_JDN,	/* Jordan */
-	WLC_PRC,	/* China */
-	WLC_JPN,	/* Japan */
-	WLC_FCC,	/* USA */
-	WLC_EUR,	/* Europe */
-	WLC_USL,	/* US Low Band only */
-	WLC_JPH,	/* Japan High Band only */
-	WLC_ALL,	/* All the channels in this band */
-	WLC_11D,	/* Represents locale recieved by 11d beacons */
-	WLC_LAST_LOCALE,
-	WLC_UNDEFINED_LOCALE = 0xf
-} wlc_locale_t;
-
-/* channel encoding */
-typedef struct channel_info {
-	int hw_channel;
-	int target_channel;
-	int scan_channel;
-} channel_info_t;
-
-/* For ioctls that take a list of MAC addresses */
-struct maclist {
-	uint count;			/* number of MAC addresses */
-	struct ether_addr ea[1];	/* variable length array of MAC addresses */
-};
-
-/* get pkt count struct passed through ioctl */
-typedef struct get_pktcnt {
-	uint rx_good_pkt;
-	uint rx_bad_pkt;
-	uint tx_good_pkt;
-	uint tx_bad_pkt;
-} get_pktcnt_t;
-
-/* Linux network driver ioctl encoding */
-typedef struct wl_ioctl {
-	uint cmd;	/* common ioctl definition */
-	void *buf;	/* pointer to user buffer */
-	uint len;	/* length of user buffer */
-	bool set;	/* get or set request (optional) */
-	uint used;	/* bytes read or written (optional) */
-	uint needed;	/* bytes needed (optional) */
-} wl_ioctl_t;
-
-/* 
- * Structure for passing hardware and software 
- * revision info up from the driver. 
- */
-typedef struct wlc_rev_info {
-	uint		vendorid;	/* PCI vendor id */
-	uint		deviceid;	/* device id of chip */
-	uint		radiorev;	/* radio revision */
-	uint		chiprev;	/* chip revision */
-	uint		corerev;	/* core revision */
-	uint		boardid;	/* board identifier (usu. PCI sub-device id) */
-	uint		boardvendor;	/* board vendor (usu. PCI sub-vendor id) */
-	uint		boardrev;	/* board revision */
-	uint		driverrev;	/* driver version */
-	uint		ucoderev;	/* microcode version */
-	uint		bus;		/* bus type */
-	uint        chipnum;    /* chip number */
-} wlc_rev_info_t;
-
-/* check this magic number */
-#define WLC_IOCTL_MAGIC		0x14e46c77
-
-/* bump this number if you change the ioctl interface */
-#define WLC_IOCTL_VERSION	1
-
-/* maximum length buffer required */
-#define WLC_IOCTL_MAXLEN	8192
-
-/* maximum length buffer required */
-#define WLC_IOCTL_SMLEN         256
-
-/* common ioctl definitions */
-#define WLC_GET_MAGIC				0
-#define WLC_GET_VERSION				1
-#define WLC_UP					2
-#define WLC_DOWN				3
-#define WLC_GET_LOOP				4
-#define WLC_SET_LOOP				5
-#define WLC_DUMP				6
-#define WLC_GET_MSGLEVEL			7
-#define WLC_SET_MSGLEVEL			8
-#define WLC_GET_PROMISC				9
-#define WLC_SET_PROMISC				10
-#define WLC_OBSOLETE				11 
-#define WLC_GET_RATE				12
-#define WLC_SET_RATE				13
-#define WLC_GET_INSTANCE			14
-#define WLC_GET_FRAG				15
-#define WLC_SET_FRAG				16
-#define WLC_GET_RTS				17
-#define WLC_SET_RTS				18
-#define WLC_GET_INFRA				19
-#define WLC_SET_INFRA				20
-#define WLC_GET_AUTH				21
-#define WLC_SET_AUTH				22
-#define WLC_GET_BSSID				23
-#define WLC_SET_BSSID				24
-#define WLC_GET_SSID				25
-#define WLC_SET_SSID				26
-#define WLC_RESTART				27
-#define WLC_DUMP_SCB				28 
-#define WLC_GET_CHANNEL				29
-#define WLC_SET_CHANNEL				30
-#define WLC_GET_SRL				31
-#define WLC_SET_SRL				32
-#define WLC_GET_LRL				33
-#define WLC_SET_LRL				34
-#define WLC_GET_PLCPHDR				35
-#define WLC_SET_PLCPHDR				36
-#define WLC_GET_RADIO				37
-#define WLC_SET_RADIO				38
-#define WLC_GET_PHYTYPE				39
-#define WLC_DUMP_RATE				40
-#define WLC_SET_RATE_PARAMS			41
-#define WLC_GET_WEP				42
-#define WLC_SET_WEP				43
-#define WLC_GET_KEY				44
-#define WLC_SET_KEY				45
-#define WLC_GET_REGULATORY			46
-#define WLC_SET_REGULATORY			47
-#define WLC_GET_PASSIVE				48	/* added by nbd */
-#define WLC_SET_PASSIVE				49	/* added by nbd */
-#define WLC_SCAN				50
-#define WLC_SCAN_RESULTS			51
-#define WLC_DISASSOC				52
-#define WLC_REASSOC				53
-#define WLC_GET_ROAM_TRIGGER			54
-#define WLC_SET_ROAM_TRIGGER			55
-#define WLC_GET_ROAM_DELTA			56
-#define WLC_SET_ROAM_DELTA			57
-#define WLC_GET_ROAM_SCAN_PERIOD		58
-#define WLC_SET_ROAM_SCAN_PERIOD		59
-#define WLC_EVM					60
-#define WLC_GET_TXANT				61
-#define WLC_SET_TXANT				62
-#define WLC_GET_ANTDIV				63
-#define WLC_SET_ANTDIV				64
-#define WLC_GET_TXPWR				65
-#define WLC_SET_TXPWR				66
-#define WLC_GET_CLOSED				67
-#define WLC_SET_CLOSED				68
-#define WLC_GET_MACLIST				69
-#define WLC_SET_MACLIST				70
-#define WLC_GET_RATESET				71
-#define WLC_SET_RATESET				72
-#define WLC_GET_LOCALE				73
-#define WLC_SET_LOCALE				74
-#define WLC_GET_BCNPRD				75
-#define WLC_SET_BCNPRD				76
-#define WLC_GET_DTIMPRD				77
-#define WLC_SET_DTIMPRD				78
-#define WLC_GET_SROM				79
-#define WLC_SET_SROM				80
-#define WLC_GET_WEP_RESTRICT			81
-#define WLC_SET_WEP_RESTRICT			82
-#define WLC_GET_COUNTRY				83
-#define WLC_SET_COUNTRY				84
-#define WLC_GET_PM				85
-#define WLC_SET_PM				86
-#define WLC_GET_WAKE				87
-#define WLC_SET_WAKE				88
-#define	WLC_GET_D11CNTS				89
-#define WLC_GET_FORCELINK			90	/* ndis only */
-#define WLC_SET_FORCELINK			91	/* ndis only */
-#define WLC_FREQ_ACCURACY			92
-#define WLC_CARRIER_SUPPRESS			93
-#define WLC_GET_PHYREG				94
-#define WLC_SET_PHYREG				95
-#define WLC_GET_RADIOREG			96
-#define WLC_SET_RADIOREG			97
-#define WLC_GET_REVINFO				98
-#define WLC_GET_UCANTDIV			99
-#define WLC_SET_UCANTDIV			100
-#define WLC_R_REG				101
-#define WLC_W_REG				102
-#define WLC_DIAG_LOOPBACK			103
-#define WLC_RESET_D11CNTS			104
-#define WLC_GET_MACMODE				105
-#define WLC_SET_MACMODE				106
-#define WLC_GET_MONITOR				107     /* added by nbd */
-#define WLC_SET_MONITOR				108     /* added by nbd */
-#define WLC_GET_GMODE				109
-#define WLC_SET_GMODE				110
-#define WLC_GET_LEGACY_ERP			111
-#define WLC_SET_LEGACY_ERP			112
-#define WLC_GET_RX_ANT				113
-#define WLC_GET_CURR_RATESET			114	/* current rateset */
-#define WLC_GET_SCANSUPPRESS			115
-#define WLC_SET_SCANSUPPRESS			116
-#define WLC_GET_AP				117
-#define WLC_SET_AP				118
-#define WLC_GET_EAP_RESTRICT			119
-#define WLC_SET_EAP_RESTRICT			120
-#define WLC_SCB_AUTHORIZE			121
-#define WLC_SCB_DEAUTHORIZE			122
-#define WLC_GET_WDSLIST				123
-#define WLC_SET_WDSLIST				124
-#define WLC_GET_ATIM				125
-#define WLC_SET_ATIM				126
-#define WLC_GET_RSSI				127
-#define WLC_GET_PHYANTDIV			128
-#define WLC_SET_PHYANTDIV			129
-#define WLC_AP_RX_ONLY				130
-#define WLC_GET_TX_PATH_PWR			131
-#define WLC_SET_TX_PATH_PWR			132
-#define WLC_GET_WSEC				133
-#define WLC_SET_WSEC				134
-#define WLC_GET_PHY_NOISE			135
-#define WLC_GET_BSS_INFO			136
-#define WLC_GET_PKTCNTS				137
-#define WLC_GET_LAZYWDS				138
-#define WLC_SET_LAZYWDS				139
-#define WLC_GET_BANDLIST			140
-#define WLC_GET_BAND				141
-#define WLC_SET_BAND				142
-#define WLC_SCB_DEAUTHENTICATE			143
-#define WLC_GET_SHORTSLOT			144
-#define WLC_GET_SHORTSLOT_OVERRIDE		145
-#define WLC_SET_SHORTSLOT_OVERRIDE		146
-#define WLC_GET_SHORTSLOT_RESTRICT		147
-#define WLC_SET_SHORTSLOT_RESTRICT		148
-#define WLC_GET_GMODE_PROTECTION		149
-#define WLC_GET_GMODE_PROTECTION_OVERRIDE	150
-#define WLC_SET_GMODE_PROTECTION_OVERRIDE	151
-#define WLC_UPGRADE				152
-#define WLC_GET_MRATE				153
-#define WLC_SET_MRATE				154
-#define WLC_GET_IGNORE_BCNS			155
-#define WLC_SET_IGNORE_BCNS			156
-#define WLC_GET_SCB_TIMEOUT			157
-#define WLC_SET_SCB_TIMEOUT			158
-#define WLC_GET_ASSOCLIST			159
-#define WLC_GET_CLK				160
-#define WLC_SET_CLK				161
-#define WLC_GET_UP				162
-#define WLC_OUT					163
-#define WLC_GET_WPA_AUTH			164
-#define WLC_SET_WPA_AUTH			165
-#define WLC_GET_UCFLAGS				166
-#define WLC_SET_UCFLAGS				167
-#define WLC_GET_PWRIDX				168
-#define WLC_SET_PWRIDX				169
-#define WLC_GET_TSSI				170
-#define WLC_GET_SUP_RATESET_OVERRIDE		171
-#define WLC_SET_SUP_RATESET_OVERRIDE		172
-#define WLC_SET_FAST_TIMER			173
-#define WLC_GET_FAST_TIMER			174
-#define WLC_SET_SLOW_TIMER			175
-#define WLC_GET_SLOW_TIMER			176
-#define WLC_DUMP_PHYREGS			177
-#define WLC_GET_GMODE_PROTECTION_CONTROL	178
-#define WLC_SET_GMODE_PROTECTION_CONTROL	179
-#define WLC_GET_PHYLIST				180
-#define WLC_ENCRYPT_STRENGTH			181	/* ndis only */
-#define WLC_DECRYPT_STATUS			182	/* ndis only */
-#define WLC_GET_KEY_SEQ				183
-#define WLC_GET_SCAN_CHANNEL_TIME		184
-#define WLC_SET_SCAN_CHANNEL_TIME		185
-#define WLC_GET_SCAN_UNASSOC_TIME		186
-#define WLC_SET_SCAN_UNASSOC_TIME		187
-#define WLC_GET_SCAN_HOME_TIME			188
-#define WLC_SET_SCAN_HOME_TIME			189
-#define WLC_GET_SCAN_PASSES			190
-#define WLC_SET_SCAN_PASSES			191
-#define WLC_GET_PRB_RESP_TIMEOUT		192
-#define WLC_SET_PRB_RESP_TIMEOUT		193
-#define WLC_GET_ATTEN				194
-#define WLC_SET_ATTEN				195
-#define WLC_GET_SHMEM				196	/* diag */
-#define WLC_SET_SHMEM				197	/* diag */
-#define WLC_GET_GMODE_PROTECTION_CTS		198
-#define WLC_SET_GMODE_PROTECTION_CTS		199
-#define WLC_SET_TKIP_MIC_FLAG			200
-#define WLC_SCB_DEAUTHENTICATE_FOR_REASON	201
-#define WLC_TKIP_COUNTERMEASURES		202
-#define WLC_GET_PIOMODE				203
-#define WLC_SET_PIOMODE				204
-#define WLC_SET_LED				209
-#define WLC_GET_LED				210
-#define WLC_GET_INTERFERENCE_MODE		211
-#define WLC_SET_INTERFERENCE_MODE		212
-#define WLC_GET_CHANNEL_QA			213
-#define WLC_START_CHANNEL_QA			214
-#define WLC_GET_CHANNEL_SEL			215
-#define WLC_START_CHANNEL_SEL			216
-#define WLC_GET_VALID_CHANNELS			217
-#define WLC_GET_FAKEFRAG			218
-#define WLC_SET_FAKEFRAG			219
-#define WLC_GET_PWROUT_PERCENTAGE		220
-#define WLC_SET_PWROUT_PERCENTAGE		221
-#define WLC_SET_BAD_FRAME_PREEMPT		222
-#define WLC_GET_BAD_FRAME_PREEMPT		223
-#define WLC_SET_LEAP_LIST			224
-#define WLC_GET_LEAP_LIST			225
-#define WLC_GET_CWMIN				226
-#define WLC_SET_CWMIN				227
-#define WLC_GET_CWMAX				228
-#define WLC_SET_CWMAX				229
-#define WLC_GET_WET				230
-#define WLC_SET_WET				231
-#define WLC_GET_KEY_PRIMARY			235
-#define WLC_SET_KEY_PRIMARY			236
-#define WLC_SCAN_WITH_CALLBACK			240
-#define WLC_WDS_GET_REMOTE_HWADDR		246	/* currently handled in wl_linux.c/wl_vx.c */
-#define WLC_SET_CS_SCAN_TIMER			248
-#define WLC_GET_CS_SCAN_TIMER			249
-#define WLC_CURRENT_PWR				256
-#define WLC_GET_CHANNELS_IN_COUNTRY		260
-#define WLC_GET_COUNTRY_LIST			261
-#define WLC_GET_VAR				262	/* get value of named variable */
-#define WLC_SET_VAR				263	/* set named variable to value */
-#define WLC_NVRAM_GET				264
-#define WLC_NVRAM_SET				265
-#define WLC_SET_WSEC_PMK			268
-#define WLC_GET_AUTH_MODE			269
-#define WLC_SET_AUTH_MODE			270
-#define WLC_LAST				273	/* do not change - use get_var/set_var */
-
-/*
- * Minor kludge alert:
- * Duplicate a few definitions that irelay requires from epiioctl.h here
- * so caller doesn't have to include this file and epiioctl.h .
- * If this grows any more, it would be time to move these irelay-specific
- * definitions out of the epiioctl.h and into a separate driver common file.
- */
-#ifndef EPICTRL_COOKIE
-#define EPICTRL_COOKIE		0xABADCEDE
-#endif
-
-/* vx wlc ioctl's offset */
-#define CMN_IOCTL_OFF 0x180
-
-/*
- * custom OID support
- *
- * 0xFF - implementation specific OID
- * 0xE4 - first byte of Broadcom PCI vendor ID
- * 0x14 - second byte of Broadcom PCI vendor ID
- * 0xXX - the custom OID number
- */
-
-/* begin 0x1f values beyond the start of the ET driver range. */
-#define WL_OID_BASE		0xFFE41420
-
-/* NDIS overrides */
-#define OID_WL_GETINSTANCE	(WL_OID_BASE + WLC_GET_INSTANCE)
-#define OID_WL_GET_FORCELINK	(WL_OID_BASE + WLC_GET_FORCELINK)
-#define OID_WL_SET_FORCELINK	(WL_OID_BASE + WLC_SET_FORCELINK)
-#define	OID_WL_ENCRYPT_STRENGTH	(WL_OID_BASE + WLC_ENCRYPT_STRENGTH)
-#define OID_WL_DECRYPT_STATUS	(WL_OID_BASE + WLC_DECRYPT_STATUS)
-
-#define WL_DECRYPT_STATUS_SUCCESS	1
-#define WL_DECRYPT_STATUS_FAILURE	2
-#define WL_DECRYPT_STATUS_UNKNOWN	3
-
-/* allows user-mode app to poll the status of USB image upgrade */
-#define WLC_UPGRADE_SUCCESS			0
-#define WLC_UPGRADE_PENDING			1
-
-/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
-#define WL_RADIO_SW_DISABLE	(1<<0)
-#define WL_RADIO_HW_DISABLE	(1<<1)
-
-/* Override bit for WLC_SET_TXPWR.  if set, ignore other level limits */
-#define WL_TXPWR_OVERRIDE	(1<<31)
-
-
-/* Bus types */
-#define WL_SB_BUS	0	/* Silicon Backplane */
-#define WL_PCI_BUS	1	/* PCI target */
-#define WL_PCMCIA_BUS	2	/* PCMCIA target */
-
-/* band types */
-#define	WLC_BAND_AUTO		0	/* auto-select */
-#define	WLC_BAND_A		1	/* "a" band (5   Ghz) */
-#define	WLC_BAND_B		2	/* "b" band (2.4 Ghz) */
-
-/* MAC list modes */
-#define WLC_MACMODE_DISABLED	0	/* MAC list disabled */
-#define WLC_MACMODE_DENY	1	/* Deny specified (i.e. allow unspecified) */
-#define WLC_MACMODE_ALLOW	2	/* Allow specified (i.e. deny unspecified) */	
-
-
-/* 54g modes (basic bits may still be overridden) */
-#define GMODE_LEGACY_B		0	/* Rateset: 1b, 2b, 5.5, 11 */
-					/* Preamble: Long */
-					/* Shortslot: Off */
-#define GMODE_AUTO		1	/* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */
-					/* Extended Rateset: 6, 9, 12, 48 */
-					/* Preamble: Long */
-					/* Shortslot: Auto */
-#define GMODE_ONLY		2	/* Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 */
-					/* Extended Rateset: 6b, 9, 12b, 48 */
-					/* Preamble: Short required */
-					/* Shortslot: Auto */
-#define GMODE_B_DEFERRED	3	/* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */
-					/* Extended Rateset: 6, 9, 12, 48 */
-					/* Preamble: Long */
-					/* Shortslot: On */
-#define GMODE_PERFORMANCE	4	/* Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 */
-					/* Preamble: Short required */
-					/* Shortslot: On and required */
-#define GMODE_LRS		5	/* Rateset: 1b, 2b, 5.5b, 11b */
-					/* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 */
-					/* Preamble: Long */
-					/* Shortslot: Auto */
-#define GMODE_MAX		6
-
-
-/* values for PLCPHdr_override */
-#define WLC_PLCP_AUTO	-1
-#define WLC_PLCP_SHORT	0
-#define WLC_PLCP_LONG	1
-
-/* values for g_protection_override */
-#define WLC_G_PROTECTION_AUTO	-1
-#define WLC_G_PROTECTION_OFF	0
-#define WLC_G_PROTECTION_ON	1
-
-/* values for g_protection_control */
-#define WLC_G_PROTECTION_CTL_OFF	0
-#define WLC_G_PROTECTION_CTL_LOCAL	1
-#define WLC_G_PROTECTION_CTL_OVERLAP	2
-
-/* Values for PM */
-#define PM_OFF	0
-#define PM_MAX	1
-#define PM_FAST 2
-
-/* interference mitigation options */
-#define	INTERFERE_NONE	0	/* off */
-#define	NON_WLAN        1	/* foreign/non 802.11 interference, no auto detect */
-#define	WLAN_MANUAL     2	/* ACI: no auto detection */
-#define	WLAN_AUTO       3	/* ACI: auto - detact */
-
-/* Message levels */
-#define WL_ERROR_VAL		0x0001
-#define WL_TRACE_VAL		0x0002
-#define WL_PRHDRS_VAL		0x0004
-#define WL_PRPKT_VAL		0x0008
-#define WL_INFORM_VAL		0x0010
-#define WL_TMP_VAL		0x0020
-#define WL_OID_VAL		0x0040
-#define WL_RATE_VAL		0x0080
-#define WL_ASSOC_VAL		0x0100
-#define WL_PRUSR_VAL		0x0200
-#define WL_PS_VAL		0x0400
-#define WL_TXPWR_VAL		0x0800
-#define WL_GMODE_VAL		0x1000
-#define WL_DUAL_VAL		0x2000
-#define WL_WSEC_VAL		0x4000
-#define WL_WSEC_DUMP_VAL	0x8000
-#define WL_LOG_VAL		0x10000
-#define WL_NRSSI_VAL		0x20000
-#define WL_LOFT_VAL		0x40000
-#define WL_REGULATORY_VAL	0x80000
-#define WL_ACI_VAL		0x100000
-
-
-/* 802.11h enforcement levels */
-#define SPECT_MNGMT_OFF         0   /* 11h disabled */
-#define SPECT_MNGMT_LOOSE       1   /* Allow scan lists to contain non-11h AP */
-				    /* when 11h is enabled */
-#define SPECT_MNGMT_STRICT      2   /* Prine out non-11h APs from scan list */
-
-
-
-/* max # of leds supported by GPIO (gpio pin# == led index#) */
-#define	WL_LED_NUMGPIO		16	/* gpio 0-15 */
-
-/* led per-pin behaviors */
-#define	WL_LED_OFF		0		/* always off */
-#define	WL_LED_ON		1		/* always on */
-#define	WL_LED_ACTIVITY		2		/* activity */
-#define	WL_LED_RADIO		3		/* radio enabled */
-#define	WL_LED_ARADIO		4		/* 5  Ghz radio enabled */
-#define	WL_LED_BRADIO		5		/* 2.4Ghz radio enabled */
-#define	WL_LED_BGMODE		6		/* on if gmode, off if bmode */
-#define	WL_LED_WI1		7		
-#define	WL_LED_WI2		8		
-#define	WL_LED_WI3		9		
-#define	WL_LED_ASSOC		10		/* associated state indicator */
-#define	WL_LED_INACTIVE		11		/* null behavior (clears default behavior) */
-#define	WL_LED_NUMBEHAVIOR	12
-
-/* led behavior numeric value format */
-#define	WL_LED_BEH_MASK		0x7f		/* behavior mask */
-#define	WL_LED_AL_MASK		0x80		/* activelow (polarity) bit */
-
-
-/* maximum channels */
-#define WL_NUMCHANNELS	64	/* max # of channels in the band */
-
-/* rate check */
-#define WL_RATE_OFDM(r)		(((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \
-				 ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \
-				 ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \
-				 ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108)
-
-/* WDS link local endpoint WPA role */
-#define WL_WDS_WPA_ROLE_AUTH	0	/* authenticator */
-#define WL_WDS_WPA_ROLE_SUP	1	/* supplicant */
-#define WL_WDS_WPA_ROLE_AUTO	255	/* auto, based on mac addr value */
-
-/* afterburner_override */
-#define	ABO_AUTO		-1	/* auto - no override */
-#define	ABO_OFF			0	/* force afterburner off */
-#define	ABO_ON			1	/* force afterburner on */
-
-#define GMODE_AFTERBURNER 6
-
-#undef PACKED
-
-#endif /* _wlioctl_h_ */
diff --git a/openwrt/target/linux/package/base-files/include/wlutils.h b/openwrt/target/linux/package/base-files/include/wlutils.h
deleted file mode 100644
index 07e2536ca3..0000000000
--- a/openwrt/target/linux/package/base-files/include/wlutils.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Broadcom wireless network adapter utility functions
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#ifndef _wlutils_h_
-#define _wlutils_h_
-
-#include <typedefs.h>
-#include <wlioctl.h>
-
-/*
- * Pass a wlioctl request to the specified interface.
- * @param	name	interface name
- * @param	cmd	WLC_GET_MAGIC <= cmd < WLC_LAST
- * @param	buf	buffer for passing in and/or receiving data
- * @param	len	length of buf
- * @return	>= 0 if successful or < 0 otherwise
- */
-extern int wl_ioctl(char *name, int cmd, void *buf, int len);
-
-/*
- * Get the MAC (hardware) address of the specified interface.
- * @param	name	interface name
- * @param	hwaddr	6-byte buffer for receiving address
- * @return	>= 0 if successful or < 0 otherwise
- */
-extern int wl_hwaddr(char *name, unsigned char *hwaddr);
-
-/*
- * Probe the specified interface.
- * @param	name	interface name
- * @return	>= 0 if a Broadcom wireless device or < 0 otherwise
- */
-extern int wl_probe(char *name);
-
-/*
- * Set/Get named variable.
- * @param	name	interface name
- * @param	var	variable name
- * @param	val	variable value/buffer
- * @param	len	variable value/buffer length
- * @return	success == 0, failure != 0
- */
-extern int wl_set_val(char *name, char *var, void *val, int len);
-extern int wl_get_val(char *name, char *var, void *val, int len);
-extern int wl_set_int(char *name, char *var, int val);
-extern int wl_get_int(char *name, char *var, int *val);
-
-#endif /* _wlutils_h_ */
diff --git a/openwrt/target/linux/package/base-files/ipkg/base-files-arch.control b/openwrt/target/linux/package/base-files/ipkg/base-files-arch.control
deleted file mode 100644
index f4a65095b9..0000000000
--- a/openwrt/target/linux/package/base-files/ipkg/base-files-arch.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: base-files-arch
-Priority: optional
-Section: sys
-Description: Board/architecture specific files 
diff --git a/openwrt/target/linux/package/base-files/src/adam2patcher.c b/openwrt/target/linux/package/base-files/src/adam2patcher.c
deleted file mode 100644
index 25a78074a6..0000000000
--- a/openwrt/target/linux/package/base-files/src/adam2patcher.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * patcher.c - ADAM2 patcher for Netgear DG834 (and compatible)
- *
- * Copyright (C) 2006 Felix Fietkau
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdint.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-#include <string.h>
-
-#include <sys/ioctl.h>
-
-int main(int argc, char **argv)
-{
-	int fd;
-	char *ptr;
-	uint32_t *i;
-
-	if (argc != 2) {
-		fprintf(stderr, "Usage: %s <filename>\n", argv[0]);
-		exit(1);
-	}
-
-	if (((fd = open(argv[1], O_RDWR)) < 0)
-			|| ((ptr = mmap(0, 128 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)) == (void *) (-1))) {
-		fprintf(stderr, "Can't open file\n");
-		exit(1);
-	}
-
-	i = (uint32_t *) &ptr[0x3944];
-	if (*i == 0x0c000944) {
-		fprintf(stderr, "Unpatched ADAM2 detected. Patching... ");
-		*i = 0x00000000;
-		msync(i, sizeof(*i), MS_SYNC|MS_INVALIDATE);
-		fprintf(stderr, "done!\n");
-	} else if (*i == 0x00000000) {
-		fprintf(stderr, "Patched ADAM2 detected.\n");
-	} else {
-		fprintf(stderr, "Unknown ADAM2 detected. Can't patch!\n");
-	}
-
-	close(fd);		
-}
diff --git a/openwrt/target/linux/package/base-files/src/jffs2root.c b/openwrt/target/linux/package/base-files/src/jffs2root.c
deleted file mode 100644
index 14662fc945..0000000000
--- a/openwrt/target/linux/package/base-files/src/jffs2root.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * jffs2root.c
- *
- * Copyright (C) 2005 Mike Baker 
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * $Id$
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-#include <string.h>
-
-#include <sys/ioctl.h>
-#include <linux/mtd/mtd.h>
-
-#define FILENAME "/dev/mtdblock/1"
-
-struct trx_header {
-	unsigned magic;		/* "HDR0" */
-	unsigned len;		/* Length of file including header */
-	unsigned crc32;		/* 32-bit CRC from flag_version to end of file */
-	unsigned flag_version;	/* 0:15 flags, 16:31 version */
-	unsigned offsets[3];	/* Offsets of partitions from start of header */
-};
-
-unsigned long *crc32;
-
-void init_crc32()
-{
-	unsigned long crc;
-	unsigned long poly = 0xEDB88320L;
-	int n, bit;
-	if ((crc32 = (unsigned long *) malloc(256 * sizeof(unsigned long))) == (void *)-1) {
-		perror("malloc");
-		exit(1);
-	}
-	for (n = 0; n < 256; n++) {
-	crc = (unsigned long) n;
-	for (bit = 0; bit < 8; bit++)
-		crc = (crc & 1) ? (poly ^ (crc >> 1)) : (crc >> 1);
-	crc32[n] = crc;
-	}
-}
-
-unsigned int crc32buf(char *buf, size_t len)
-{
-	unsigned int crc = 0xFFFFFFFF;
-	for (; len; len--, buf++)
-	crc = crc32[(crc ^ *buf) & 0xff] ^ (crc >> 8);
-	return crc;
-}
-
-int main(int argc, char **argv)
-{
-	int fd;
-	struct mtd_info_user mtdInfo;
-	unsigned long len;
-	struct trx_header *ptr;
-	char *buf;
-	
-	if (((fd = open(FILENAME, O_RDWR))	< 0)
-			|| ((len = lseek(fd, 0, SEEK_END)) < 0)
-			|| ((ptr = (struct trx_header *) mmap(0, len, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)) == (void *) (-1))
-			|| (ptr->magic != 0x30524448)) {
-		printf("Error reading trx info\n");
-		exit(-1);
-	}
-	close (fd);
-
-	if (((fd = open("/dev/mtd/1", O_RDWR))	< 0)
-			|| (ioctl(fd, MEMGETINFO, &mtdInfo))) {
-		fprintf(stderr, "Could not get MTD device info from %s\n", FILENAME);
-		close(fd);
-		exit(1);
-	}
-	close(fd);
-
-	if (argc > 1 && !strcmp(argv[1],"--move")) {
-		if (ptr->offsets[2] >= ptr->len) {
-			printf("Partition already moved outside trx\n");
-		} else {
-			init_crc32();
-			ptr->offsets[2] +=	(mtdInfo.erasesize - 1);
-			ptr->offsets[2] &= ~(mtdInfo.erasesize - 1);
-			ptr->len = ptr->offsets[2];
-			ptr->crc32 = crc32buf((void *) &(ptr->flag_version), ptr->len - offsetof(struct trx_header, flag_version));
-			msync(ptr,sizeof(struct trx_header),MS_SYNC|MS_INVALIDATE);
-			printf("Partition moved; please reboot\n");
-		}
-	} else if (argc > 1 && !strcmp(argv[1], "--clean")) {
-		buf = (char *) ptr;
-		if (buf[ptr->offsets[1] - 1] == 0) {
-			init_crc32();
-			buf[ptr->offsets[1] - 1] = 1;
-			ptr->crc32 = crc32buf((void *) &(ptr->flag_version), ptr->len - offsetof(struct trx_header, flag_version));
-			msync(ptr,sizeof(struct trx_header),MS_SYNC|MS_INVALIDATE);
-			printf("Partition marked as clean\n");
-		}
-	} else {
-		int x;
-		printf(" erase: 0x%08x\n",mtdInfo.erasesize);
-		printf("=== trx ===\n");
-		printf("mapped: 0x%08x\n", (unsigned)ptr);
-		printf(" magic: 0x%08x\n", ptr->magic);
-		printf("	 len: 0x%08x\n", ptr->len);
-		printf("	 crc: 0x%08x\n", ptr->crc32);
-		for (x = 0; x < 3; x++)
-			printf(" offset[%d]: 0x%08x\n", x, ptr->offsets[x]);
-	}
-
-	munmap((void *) ptr, len);
-	return 0;
-}
diff --git a/openwrt/target/linux/package/diag/Config.in b/openwrt/target/linux/package/diag/Config.in
deleted file mode 100644
index 70f726c5b6..0000000000
--- a/openwrt/target/linux/package/diag/Config.in
+++ /dev/null
@@ -1,7 +0,0 @@
-config BR2_PACKAGE_KMOD_DIAG
-	prompt "kmod-diag......................... Driver for router LEDs and Buttons"
-	tristate
-	depends BR2_LINUX_2_4_BRCM
-	default y
-	help
-	  Driver for router LEDs and Buttons
diff --git a/openwrt/target/linux/package/diag/Makefile b/openwrt/target/linux/package/diag/Makefile
deleted file mode 100644
index 3329ee9852..0000000000
--- a/openwrt/target/linux/package/diag/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-# Makefile for the diag module
-#
-# $Id$
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME := kmod-diag
-PKG_RELEASE := 1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_DIAG,$(PKG_NAME),$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-DIAG_FLAGS:=$(TARGET_CFLAGS) -D__KERNEL__ -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \
-		-mno-abicalls -fno-pic -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 \
-		-Wa,-mips32 -Wa,--trap -Wstrict-prototypes -Wno-trigraphs -DMODULE -mlong-calls -fno-common -I. -I linux-2.4 -nostdinc \
-		-iwithprefix include -I$(LINUX_DIR)/include -I$(LINUX_DIR)/include/asm/gcc -c -I$(LINUX_DIR)/arch/mips/bcm947xx/include -DBCMDRIVER
-
-$(PKG_BUILD_DIR)/.prepared:
-	mkdir -p $(PKG_BUILD_DIR)
-	touch $@
-
-$(PKG_BUILD_DIR)/.built:
-	$(TARGET_CC) $(DIAG_FLAGS) -o $(PKG_BUILD_DIR)/diag.o diag_led.c
-	touch $@
-	
-$(IPKG_KMOD_DIAG):
-	mkdir -p $(IDIR_KMOD_DIAG)/lib/modules/$(LINUX_VERSION)
-	$(CP) $(PKG_BUILD_DIR)/diag.o $(IDIR_KMOD_DIAG)/lib/modules/$(LINUX_VERSION)/
-	$(IPKG_BUILD) $(IDIR_KMOD_DIAG) $(PACKAGE_DIR)
diff --git a/openwrt/target/linux/package/diag/diag_led.c b/openwrt/target/linux/package/diag/diag_led.c
deleted file mode 100644
index 6ad7ff102f..0000000000
--- a/openwrt/target/linux/package/diag/diag_led.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * diag_led.c - replacement diag module
- *
- * Copyright (C) 2004 Mike Baker,
- *                    Imre Kaloz <kaloz@dune.hu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * $Id$
- */
-
-/*
- * ChangeLog:
- * 2004/03/28 initial release 
- * 2004/08/26 asus & buffalo support added
- * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added
- * 2005/04/13 added licensing informations
- * 2005/04/18 base reset polarity off initial readings
- * 2006/02/07 motorola wa840g/we800g support added
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sysctl.h>
-#include <asm/io.h>
-#include <typedefs.h>
-#include <osl.h>
-#include <bcmdevs.h>
-#include <sbutils.h>
-
-extern char * nvram_get(const char *name);
-static void *sbh;
-
-// v2.x - - - - -
-#define DIAG_GPIO (1<<1)
-#define DMZ_GPIO  (1<<7)
-
-static void set_gpio(uint32 mask, uint32 value) {
-	sb_gpiocontrol(sbh,mask, 0, GPIO_DRV_PRIORITY);
-	sb_gpioouten(sbh,mask,mask,GPIO_DRV_PRIORITY);
-	sb_gpioout(sbh,mask,value,GPIO_DRV_PRIORITY);
-}
-
-static void v2_set_diag(u8 state) {
-	set_gpio(DIAG_GPIO,state);
-}
-static void v2_set_dmz(u8 state) {
-	set_gpio(DMZ_GPIO,state);
-}
-
-// v1.x - - - - -
-#define LED_DIAG   0x13
-#define LED_DMZ    0x12
-
-static void v1_set_diag(u8 state) {
-	if (!state) {
-		*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
-	} else {
-		*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
-	}
-}
-static void v1_set_dmz(u8 state) {
-	if (!state) {
-		*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
-	} else {
-		*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
-	}
-}
-
-static void wap1_set_diag(u8 state) {
-       set_gpio(1<<3,state);
-}
-static void wap1_set_dmz(u8 state) {
-       set_gpio(1<<4,state);
-}
-
-// - - - - -
-static void ignore(u8 ignored) {};
-
-// - - - - -
-#define BIT_DMZ         0x01
-#define BIT_DIAG        0x04
-
-void (*set_diag)(u8 state);
-void (*set_dmz)(u8 state);
-
-static unsigned int diag = 0;
-
-static void diag_change()
-{
-	set_diag(0xFF); // off
-	set_dmz(0xFF); // off
-
-	if(diag & BIT_DIAG)
-		set_diag(0x00); // on
-	if(diag & BIT_DMZ)
-		set_dmz(0x00); // on
-}
-
-static int proc_diag(ctl_table *table, int write, struct file *filp,
-		void *buffer, size_t *lenp)
-{
-	int r;
-	r = proc_dointvec(table, write, filp, buffer, lenp);
-	if (write && !r) {
-		diag_change();
-	}
-	return r;
-}
-
-// - - - - -
-static unsigned char reset_gpio = 0;
-static unsigned char reset_polarity = 0;
-static unsigned int reset = 0;
-
-static int proc_reset(ctl_table *table, int write, struct file *filp,
-		void *buffer, size_t *lenp)
-{
-
-	if (reset_gpio) {
-		sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY);
-		sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY);
-		reset=!(sb_gpioin(sbh)&reset_gpio);
-
-		if (reset_polarity) reset=!reset;
-	} else {
-		reset=0;
-	}
-
-	return proc_dointvec(table, write, filp, buffer, lenp);
-}
-
-// - - - - -
-static struct ctl_table_header *diag_sysctl_header;
-
-static ctl_table sys_diag[] = {
-         { 
-	   ctl_name: 2000,
-	   procname: "diag", 
-	   data: &diag,
-	   maxlen: sizeof(diag), 
-	   mode: 0644,
-	   proc_handler: proc_diag
-	 },
-	 {
-	   ctl_name: 2001,
-	   procname: "reset",
-	   data: &reset,
-	   maxlen: sizeof(reset),
-	   mode: 0444,
-	   proc_handler: proc_reset 
-	 },
-         { 0 }
-};
-
-static int __init diag_init()
-{
-	char *buf;
-	u32 board_type;
-	sbh = sb_kattach();
-	sb_gpiosetcore(sbh);
-
-	board_type = sb_boardtype(sbh);
-	printk(KERN_INFO "diag boardtype: %08x\n",board_type);
-
-	set_diag=ignore;
-	set_dmz=ignore;
-	
-	buf=nvram_get("pmon_ver") ?: "";
-	if (((board_type & 0xf00) == 0x400) && (strncmp(buf, "CFE", 3) != 0)) {
-		buf=nvram_get("boardtype")?:"";
-		if (!strncmp(buf,"bcm94710dev",11)) {
-			buf=nvram_get("boardnum")?:"";
-			if (!strcmp(buf,"42")) {
-				// wrt54g v1.x
-				set_diag=v1_set_diag;
-				set_dmz=v1_set_dmz;
-				reset_gpio=(1<<6);
-			}
-			if (simple_strtoul(buf, NULL, 0) == 2) {
-				// wap54g v1.0
-				// do not use strcmp as PMON v5.3.22 has some built-in nvram 
-				// defaults with trailing \r
-				set_diag=wap1_set_diag;
-				// no dmz led on wap54g, used green led 
-				// labeled "WLAN Link" instead
-				set_dmz=wap1_set_dmz;
-				reset_gpio=(1<<0);
-			}
-			if (!strcmp(buf,"asusX")) {
-				//asus wl-500g
-				reset_gpio=(1<<6);
-			}
-			if (!strcmp(buf,"2")) {
-				//wa840g v1 / we800g v1
-				reset_gpio=(1<<0);
-			}
-		}
-		if (!strcmp(buf,"bcm94710ap")) {
-			buf=nvram_get("boardnum")?:"";
-			if (!strcmp(buf,"42")) {
-				// buffalo
-				set_dmz=v2_set_dmz;
-				reset_gpio=(1<<4);
-			}
-			if (!strcmp(buf,"44")) {
-				//dell truemobile
-				set_dmz=v2_set_dmz;
-				reset_gpio=(1<<0);
-			}
-		}
-	} else {
-		buf=nvram_get("boardnum")?:"";
-		if (!strcmp(buf,"42")) {
-			//linksys
-			set_diag=v2_set_diag;
-			set_dmz=v2_set_dmz;
-			reset_gpio=(1<<6);
-		}
-		if (!strcmp(buf,"44")) {
-			//motorola
-			reset_gpio=(1<<5);
-		}
-		if (!strcmp(buf,"00")) {
-			//buffalo
-			reset_gpio=(1<<7);
-		}
-		if (!strcmp(buf,"45")) {
-			//wl-500g deluxe
-			reset_gpio=(1<<6);
-		}
-	}
-
-	
-	sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY);
-	sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY);
-	reset_polarity=!(sb_gpioin(sbh)&reset_gpio);
-
-	diag_sysctl_header = register_sysctl_table(sys_diag, 0);
-	diag_change();
-
-	return 0;
-}
-
-static void __exit diag_exit()
-{
-	unregister_sysctl_table(diag_sysctl_header);
-}
-
-EXPORT_NO_SYMBOLS;
-MODULE_AUTHOR("openwrt.org");
-MODULE_LICENSE("GPL");
-
-module_init(diag_init);
-module_exit(diag_exit);
diff --git a/openwrt/target/linux/package/diag/ipkg/kmod-diag.control b/openwrt/target/linux/package/diag/ipkg/kmod-diag.control
deleted file mode 100644
index 9c93926b3a..0000000000
--- a/openwrt/target/linux/package/diag/ipkg/kmod-diag.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-diag
-Priority: essential
-Section: sys
-Description: Driver for Router LEDs and Buttons
diff --git a/openwrt/target/linux/package/fuse/Config.in b/openwrt/target/linux/package/fuse/Config.in
deleted file mode 100644
index 8fbb34c079..0000000000
--- a/openwrt/target/linux/package/fuse/Config.in
+++ /dev/null
@@ -1,19 +0,0 @@
-config BR2_PACKAGE_KMOD_FUSE
-	prompt "kmod-fuse......................... FUSE kernel module"
-	tristate
-	default m if CONFIG_DEVEL
-	help
-	  With FUSE it is possible to implement a fully functional 
-	  filesystem in a userspace program.
-	  
-	  Features include:
-	  
-	   * Simple library API
-	   * Simple installation (no need to patch or recompile the kernel)
-	   * Secure implementation
-	   * Userspace - kernel interface is very efficient
-	   * Usable by non privileged users
-	   * Runs on Linux kernels 2.4.X and 2.6.X
-	   * Has proven very stable over time
-	  
-	  http://fuse.sourceforge.net/
diff --git a/openwrt/target/linux/package/fuse/Makefile b/openwrt/target/linux/package/fuse/Makefile
deleted file mode 100644
index e9922bcd32..0000000000
--- a/openwrt/target/linux/package/fuse/Makefile
+++ /dev/null
@@ -1,80 +0,0 @@
-# $Id$
-
-include $(TOPDIR)/rules.mk
-include ../../rules.mk
-
-PKG_NAME:=fuse
-PKG_VERSION:=2.5.2
-PKG_RELEASE:=1
-PKG_MD5SUM:=ea565debe6c7486963bef05c45c50361
-
-PKG_SOURCE_URL:=@SF/$(PKG_NAME)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_FUSE,kmod-fuse,$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-$(PKG_BUILD_DIR)/.configured:
-	(cd $(PKG_BUILD_DIR); \
-		rm -rf config.{cache,status} ; \
-		touch configure.in ; \
-		touch aclocal.m4 ; \
-		touch Makefile.in ; \
-		touch include/config.h.in ; \
-		touch configure ; \
-		$(TARGET_CONFIGURE_OPTS) \
-		./configure \
-			--target=$(GNU_TARGET_NAME) \
-			--host=$(GNU_TARGET_NAME) \
-			--build=$(GNU_HOST_NAME) \
-			--program-prefix="" \
-			--program-suffix="" \
-			--prefix=/usr \
-			--exec-prefix=/usr \
-			--bindir=/usr/bin \
-			--datadir=/usr/share \
-			--includedir=/usr/include \
-			--infodir=/usr/share/info \
-			--libdir=/usr/lib \
-			--libexecdir=/usr/lib \
-			--localstatedir=/var \
-			--mandir=/usr/share/man \
-			--sbindir=/usr/sbin \
-			--sysconfdir=/etc \
-			$(DISABLE_LARGEFILE) \
-			$(DISABLE_NLS) \
-			--enable-shared \
-			--enable-static \
-			--disable-rpath \
-			--enable-kernel-module \
-			--disable-lib \
-			--disable-util \
-			--disable-example \
-			--disable-auto-modprobe \
-			--with-kernel=$(LINUX_DIR) \
-			--disable-mtab \
-	);
-	touch $@
-
-$(PKG_BUILD_DIR)/.built:
-	mkdir -p $(PKG_INSTALL_DIR)
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		PATH="$(TARGET_PATH)" \
-		DESTDIR="$(PKG_INSTALL_DIR)" \
-		SUBDIRS="kernel" \
-		all install
-	touch $@
-
-$(IPKG_KMOD_FUSE):
-	mkdir -p $(IDIR_KMOD_FUSE)/lib/modules/$(LINUX_VERSION)
-	$(CP) $(PKG_INSTALL_DIR)/lib/modules/$(LINUX_VERSION)/kernel/fs/fuse/fuse.$(LINUX_KMOD_SUFFIX) \
-		$(IDIR_KMOD_FUSE)/lib/modules/$(LINUX_VERSION)/
-	$(IPKG_BUILD) $(IDIR_KMOD_FUSE) $(PACKAGE_DIR)
-
diff --git a/openwrt/target/linux/package/fuse/ipkg/kmod-fuse.control b/openwrt/target/linux/package/fuse/ipkg/kmod-fuse.control
deleted file mode 100644
index 1a9d322035..0000000000
--- a/openwrt/target/linux/package/fuse/ipkg/kmod-fuse.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-fuse
-Priority: optional
-Section: sys
-Description: Filesystem in Userspace (kernel module)
diff --git a/openwrt/target/linux/package/fuse/patches/101-kmod_build.patch b/openwrt/target/linux/package/fuse/patches/101-kmod_build.patch
deleted file mode 100644
index e541d47142..0000000000
--- a/openwrt/target/linux/package/fuse/patches/101-kmod_build.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-diff -Nur fuse-2.5.2/kernel/Makefile.in fuse-2.5.2.patched/kernel/Makefile.in
---- fuse-2.5.2/kernel/Makefile.in	2006-02-02 18:04:52.000000000 +0100
-+++ fuse-2.5.2.patched/kernel/Makefile.in	2006-03-28 20:17:13.000000000 +0200
-@@ -54,23 +54,8 @@
- 
- ifeq ($(majver), 2.4)
- 
--CC = gcc
--LD = ld
--CFLAGS = -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -pipe @KERNELCFLAGS@
--CPPFLAGS = -I@kernelsrc@/include -I. -D__KERNEL__ -DMODULE -D_LOOSE_KERNEL_NAMES -DFUSE_VERSION=\"$(VERSION)\" @KERNELCPPFLAGS@
--
- fuse_objs = dev.o dir.o file.o inode.o compat/parser.o
- 
--SUFFIXES = .c .o .s
--
--all-spec: fuse.o
--
--.c.o:
--	$(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $@
--
--fuse.o: $(fuse_objs)
--	$(LD) -r -o fuse.o $(fuse_objs)
--
- fuse_headers = fuse_i.h fuse_kernel.h
- 
- dev.o: $(fuse_headers)
-@@ -78,6 +63,18 @@
- file.o: $(fuse_headers)
- inode.o: $(fuse_headers)
- 
-+EXTRA_CFLAGS += -DFUSE_VERSION=\"$(VERSION)\"
-+
-+O_TARGET := fuse.o
-+
-+obj-y := $(fuse_objs) 
-+obj-m := $(O_TARGET)
-+
-+-include $(TOPDIR)/Rules.make
-+
-+all-spec:
-+	$(MAKE) -C @kernelsrc@ TOPDIR=@kernelsrc@ SUBDIRS=$(PWD) modules
-+
- else
- 
- EXTRA_CFLAGS += -DFUSE_VERSION=\"$(VERSION)\"
diff --git a/openwrt/target/linux/package/hostap/Config.in b/openwrt/target/linux/package/hostap/Config.in
deleted file mode 100644
index 767b459316..0000000000
--- a/openwrt/target/linux/package/hostap/Config.in
+++ /dev/null
@@ -1,40 +0,0 @@
-config BR2_PACKAGE_KMOD_HOSTAP
-	prompt "kmod-hostap....................... Host AP support for Prism2/2.5/3 IEEE 802.11b"
-	tristate
-	depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_4_BRCM
-	default m if CONFIG_DEVEL
-	help
-	  A driver for 802.11b wireless cards based on Intersil Prism2/2.5/3
-	  chipset. This driver supports so called Host AP mode that allows
-	  the card to act as an IEEE 802.11 access point.
-	  
-	  This option includes the base Host AP driver code that is shared by
-	  different hardware models. You will also need to enable support for
-	  PLX/PCI/CS version of the driver to actually use the driver.
-	  
-	  http://hostap.epitest.fi/
-
-config BR2_PACKAGE_KMOD_HOSTAP_PCI
-	prompt   "kmod-hostap-pci................. Host AP driver for Prism2.5 PCI adaptors"
-	tristate
-	default m if CONFIG_DEVEL
-	depends BR2_PACKAGE_KMOD_HOSTAP
-	help
-	  Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
-	  driver and its help text includes more information about the Host AP
-	  driver.
-	  
-	  http://hostap.epitest.fi/
-
-config BR2_PACKAGE_KMOD_HOSTAP_PLX
-	prompt   "kmod-hostap-plx................. Host AP driver for Prism2/2.5/3 in PLX9052 based PCI adaptors"
-	tristate
-	default m if CONFIG_DEVEL
-	depends BR2_PACKAGE_KMOD_HOSTAP
-	help
-	  Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
-	  driver and its help text includes more information about the Host AP
-	  driver.
-	  
-	  http://hostap.epitest.fi/
-
diff --git a/openwrt/target/linux/package/hostap/Makefile b/openwrt/target/linux/package/hostap/Makefile
deleted file mode 100644
index 3e8e604984..0000000000
--- a/openwrt/target/linux/package/hostap/Makefile
+++ /dev/null
@@ -1,58 +0,0 @@
-# $Id$
-
-include $(TOPDIR)/rules.mk
-include ../../rules.mk
-
-PKG_NAME:=hostap-driver
-PKG_VERSION:=0.4.7
-PKG_RELEASE:=1
-PKG_MD5SUM:=ee495686cf27011b4e401963c2c7f62a
-
-PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_HOSTAP,kmod-hostap,$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-$(eval $(call PKG_template,KMOD_HOSTAP_PCI,kmod-hostap-pci,$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-$(eval $(call PKG_template,KMOD_HOSTAP_PLX,kmod-hostap-plx,$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-$(PKG_BUILD_DIR)/.configured:
-	touch $@
-
-$(PKG_BUILD_DIR)/.built: 
-	$(MAKE) -C $(LINUX_DIR)/ \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		SUBDIRS="$(PKG_BUILD_DIR)/driver/modules" \
-		modules
-	touch $@
-
-$(IPKG_KMOD_HOSTAP):
-	install -m0755 -d $(IDIR_KMOD_HOSTAP)/lib/modules/$(LINUX_VERSION)
-	$(CP) \
-		$(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \
-		$(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \
-		$(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \
-		$(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX) \
-		$(IDIR_KMOD_HOSTAP)/lib/modules/$(LINUX_VERSION)/
-	$(IPKG_BUILD) $(IDIR_KMOD_HOSTAP) $(PACKAGE_DIR)
-
-$(IPKG_KMOD_HOSTAP_PCI):
-	install -m0755 -d $(IDIR_KMOD_HOSTAP_PCI)/lib/modules/$(LINUX_VERSION)
-	$(CP) \
-		$(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX) \
-		$(IDIR_KMOD_HOSTAP_PCI)/lib/modules/$(LINUX_VERSION)/
-	$(IPKG_BUILD) $(IDIR_KMOD_HOSTAP_PCI) $(PACKAGE_DIR)
-
-$(IPKG_KMOD_HOSTAP_PLX):
-	install -m0755 -d $(IDIR_KMOD_HOSTAP_PLX)/lib/modules/$(LINUX_VERSION)
-	$(CP) \
-		$(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX) \
-		$(IDIR_KMOD_HOSTAP_PLX)/lib/modules/$(LINUX_VERSION)/
-	$(IPKG_BUILD) $(IDIR_KMOD_HOSTAP_PLX) $(PACKAGE_DIR)
-
diff --git a/openwrt/target/linux/package/hostap/ipkg/kmod-hostap-pci.control b/openwrt/target/linux/package/hostap/ipkg/kmod-hostap-pci.control
deleted file mode 100644
index 3c3cdf8256..0000000000
--- a/openwrt/target/linux/package/hostap/ipkg/kmod-hostap-pci.control
+++ /dev/null
@@ -1,5 +0,0 @@
-Package: kmod-hostap-pci
-Priority: optional
-Section: net
-Depends: kmod-hostap
-Description: Host AP driver for Prism2.5 PCI adaptors
diff --git a/openwrt/target/linux/package/hostap/ipkg/kmod-hostap-plx.control b/openwrt/target/linux/package/hostap/ipkg/kmod-hostap-plx.control
deleted file mode 100644
index 6e039b8345..0000000000
--- a/openwrt/target/linux/package/hostap/ipkg/kmod-hostap-plx.control
+++ /dev/null
@@ -1,5 +0,0 @@
-Package: kmod-hostap-plx
-Priority: optional
-Section: net
-Depends: kmod-hostap
-Description: Host AP driver for Prism2/2.5/3 in PLX9052 based PCI adaptors
diff --git a/openwrt/target/linux/package/hostap/ipkg/kmod-hostap.control b/openwrt/target/linux/package/hostap/ipkg/kmod-hostap.control
deleted file mode 100644
index e5efb4e7f9..0000000000
--- a/openwrt/target/linux/package/hostap/ipkg/kmod-hostap.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-hostap
-Priority: optional
-Section: net
-Description: Host AP support for Prism2/2.5/3 IEEE 802.11b
diff --git a/openwrt/target/linux/package/madwifi-old/Config.in b/openwrt/target/linux/package/madwifi-old/Config.in
deleted file mode 100644
index 115ce03f60..0000000000
--- a/openwrt/target/linux/package/madwifi-old/Config.in
+++ /dev/null
@@ -1,9 +0,0 @@
-config BR2_PACKAGE_KMOD_MADWIFI_OLD
-       prompt "kmod-madwifi-old.................. (old) Atheros Wifi driver"
-       tristate
-       default m if CONFIG_DEVEL
-       default n
-       help
-         Madwifi-old driver for Atheros wireless adapters
-
-         http://www.madwifi.org/
diff --git a/openwrt/target/linux/package/madwifi-old/Makefile b/openwrt/target/linux/package/madwifi-old/Makefile
deleted file mode 100644
index 25c64df50a..0000000000
--- a/openwrt/target/linux/package/madwifi-old/Makefile
+++ /dev/null
@@ -1,103 +0,0 @@
-# $Id: Makefile 3287 2006-02-28 20:09:56Z nbd $
-
-include $(TOPDIR)/rules.mk
-include ../../rules.mk
-
-PKG_NAME:=madwifi-old
-PKG_VERSION:=r1417-20060128
-PKG_RELEASE:=1
-PKG_MD5SUM:=95d457e0edfb7028e09dee60db7fa7b8
-
-PKG_SOURCE_URL:=http://snapshots.madwifi.org/$(PKG_NAME)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-ifeq ($(ARCH),mips)
-HAL_TARGET:=mips-be-elf
-endif
-ifeq ($(ARCH),mipsel)
-HAL_TARGET:=mips-le-elf
-endif
-ifeq ($(ARCH),i386)
-HAL_TARGET:=i386-elf
-endif
-
-BUS := PCI
-
-ifneq ($(BR2_LINUX_2_4_AR531X),)
-	BUS := AHB
-endif
-# ifneq ($(BR2_LINUX_2_6_ARUBA),)
-#      BUS := PCI AHB  # no suitable HAL for AHB yet.
-# endif
-
-BUS_MODULES:=
-ifeq ($(findstring AHB,$(BUS)),AHB)
-BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
-endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
-BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
-endif
-
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_MADWIFI_OLD,kmod-madwifi-old,$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-$(PKG_BUILD_DIR)/.configured:
-	touch $@
-
-MADWIFI_OLD_MAKEOPTS= -C $(PKG_BUILD_DIR) \
-		PATH="$(TARGET_PATH)" \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		TARGET="$(HAL_TARGET)" \
-		TOOLPREFIX="$(KERNEL_CROSS)" \
-		TOOLPATH="$(KERNEL_CROSS)" \
-		KERNELPATH="$(LINUX_DIR)" \
-		DOMULTI=1
-
-
-$(PKG_BUILD_DIR)/.built:
-ifeq ($(findstring AHB,$(BUS)),AHB)
-	$(MAKE) $(MADWIFI_OLD_MAKEOPTS) BUS="AHB" all
-endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
-	$(MAKE) $(MADWIFI_OLD_MAKEOPTS) BUS="PCI" all
-endif
-	$(MAKE) $(MADWIFI_OLD_MAKEOPTS) -C tools all
-	$(RSTRIP) $(PKG_BUILD_DIR)/tools/madwifi_multi
-	touch $@
-
-$(IPKG_KMOD_MADWIFI_OLD):
-	install -d -m0755 $(IDIR_KMOD_MADWIFI_OLD)/etc/modules.d
-	install -m0644 ./files/madwifi.modules $(IDIR_KMOD_MADWIFI_OLD)/etc/modules.d/20-madwifi
-	install -d -m0755 $(IDIR_KMOD_MADWIFI_OLD)/etc/init.d
-	install -m0755 ./files/madwifi.init $(IDIR_KMOD_MADWIFI_OLD)/etc/init.d/S20madwifi
-	install -d -m0755 $(IDIR_KMOD_MADWIFI_OLD)/lib/modules/$(LINUX_VERSION)
-	$(CP)   $(PKG_BUILD_DIR)/net80211/wlan*.$(LINUX_KMOD_SUFFIX) \
-		$(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
-		$(BUS_MODULES) \
-		$(PKG_BUILD_DIR)/ath_rate/sample/ath_rate_sample.$(LINUX_KMOD_SUFFIX) \
-		$(PKG_BUILD_DIR)/net80211/*.$(LINUX_KMOD_SUFFIX) \
-		$(IDIR_KMOD_MADWIFI_OLD)/lib/modules/$(LINUX_VERSION)/
-	install -d -m0755 $(IDIR_KMOD_MADWIFI_OLD)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/tools/{80211debug,80211stats,athchans,athctrl,athdebug,athkey,athstats} $(IDIR_KMOD_MADWIFI_OLD)/usr/sbin/
-	$(IPKG_BUILD) $(IDIR_KMOD_MADWIFI_OLD) $(PACKAGE_DIR)
-
-$(STAGING_DIR)/usr/include/madwifi-old/net80211/ieee80211.h: $(PKG_BUILD_DIR)/.built
-	mkdir -p $(STAGING_DIR)/usr/include/madwifi-old
-	$(CP) $(PKG_BUILD_DIR)/include $(STAGING_DIR)/usr/include/madwifi-old
-	mkdir -p $(STAGING_DIR)/usr/include/madwifi-old/net80211
-	$(CP) $(PKG_BUILD_DIR)/net80211/*.h $(STAGING_DIR)/usr/include/madwifi-old/net80211/
-	touch $@
-
-install-dev: $(STAGING_DIR)/usr/include/madwifi-old/net80211/ieee80211.h
-
-uninstall-dev:
-	rm -rf $(STAGING_DIR)/usr/include/madwifi-old
-
-compile-targets: install-dev
-clean-targets: uninstall-dev
diff --git a/openwrt/target/linux/package/madwifi-old/files/madwifi.init b/openwrt/target/linux/package/madwifi-old/files/madwifi.init
deleted file mode 100644
index b1e78c0930..0000000000
--- a/openwrt/target/linux/package/madwifi-old/files/madwifi.init
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/bin/sh
-iwpriv ath0 mode 3
diff --git a/openwrt/target/linux/package/madwifi-old/files/madwifi.modules b/openwrt/target/linux/package/madwifi-old/files/madwifi.modules
deleted file mode 100644
index 996b8e7205..0000000000
--- a/openwrt/target/linux/package/madwifi-old/files/madwifi.modules
+++ /dev/null
@@ -1,11 +0,0 @@
-wlan
-ath_hal
-ath_rate_sample
-ath_pci
-wlan_acl
-wlan_ccmp
-wlan_tkip
-wlan_wep
-wlan_xauth
-wlan_scan_ap
-wlan_scan_sta
diff --git a/openwrt/target/linux/package/madwifi-old/ipkg/kmod-madwifi-old.control b/openwrt/target/linux/package/madwifi-old/ipkg/kmod-madwifi-old.control
deleted file mode 100644
index f7e5b8719f..0000000000
--- a/openwrt/target/linux/package/madwifi-old/ipkg/kmod-madwifi-old.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-madwifi-old
-Priority: optional
-Section: net
-Description: Driver for Atheros 802.11a/b/g MiniPCI cards
diff --git a/openwrt/target/linux/package/madwifi-old/patches/100-kernel_cflags.patch b/openwrt/target/linux/package/madwifi-old/patches/100-kernel_cflags.patch
deleted file mode 100644
index 5525c3f557..0000000000
--- a/openwrt/target/linux/package/madwifi-old/patches/100-kernel_cflags.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-diff -urN madwifi.old/Makefile madwifi.dev/Makefile
---- madwifi.old/Makefile	2005-07-13 02:35:11.000000000 +0200
-+++ madwifi.dev/Makefile	2005-08-13 22:39:26.973649096 +0200
-@@ -46,7 +46,7 @@
- # NB: the order is important here
- DIRS= ${ATH_HAL} ${ATH_RATE} ${WLAN} ${ATH}
-
--all: configcheck
-+all:
-	mkdir -p ${SYMBOLSDIR}
-	for i in ${DIRS}; do \
-		$(MAKE) -C $$i || exit 1; \
-diff -urn madwifi.old/hal/public/mips-le-elf.inc madwifi.dev/hal/public/mips-le-elf.inc
---- madwifi.old/hal/public/mips-le-elf.inc     2005-08-13 22:36:45.646174000 +0200
-+++ madwifi.dev/hal/public/mips-le-elf.inc     2005-08-13 22:37:52.506010360 +0200
-@@ -63,5 +63,5 @@
-
- LDOPTS=	-EL
- COPTS+=	-DAH_BYTE_ORDER=AH_LITTLE_ENDIAN
--COPTS+=	-G 0 -EL -mno-abicalls -fno-pic -mips2 -Wa,--trap \
-+COPTS+=	-G 0 -EL -mno-abicalls -fno-pic -mips32 -Wa,--trap \
-	-fno-strict-aliasing -fno-common -fomit-frame-pointer -mlong-calls
-diff -urn madwifi.old/hal/public/mips-be-elf.inc madwifi.dev/hal/public/mips-be-elf.inc
---- madwifi.old/hal/public/mips-be-elf.inc     2005-08-13 22:36:45.646174000 +0200
-+++ madwifi.dev/hal/public/mips-be-elf.inc     2005-08-13 22:37:52.506010360 +0200
-@@ -66,5 +66,5 @@
- 
- LDOPTS=	-EB
- COPTS+=	-DAH_BYTE_ORDER=AH_BIG_ENDIAN
--COPTS+=	-G 0 -EB -mno-abicalls -fno-pic -mips2 -Wa,--trap \
-+COPTS+=	-G 0 -EB -mno-abicalls -fno-pic -mips32 -Wa,--trap \
- 	-fno-strict-aliasing -fno-common -fomit-frame-pointer -mlong-calls
diff --git a/openwrt/target/linux/package/madwifi/Config.in b/openwrt/target/linux/package/madwifi/Config.in
deleted file mode 100644
index 14a3b8541b..0000000000
--- a/openwrt/target/linux/package/madwifi/Config.in
+++ /dev/null
@@ -1,10 +0,0 @@
-config BR2_PACKAGE_KMOD_MADWIFI
-	prompt "kmod-madwifi...................... Atheros Wifi driver"
-	tristate
-	default y if BR2_LINUX_2_6_BRCM || BR2_LINUX_2_6_ARUBA || BR2_LINUX_2_4_AR531X || BR2_LINUX_2_6_XSCALE
-	default m if CONFIG_DEVEL
-	default n
-	help
-	  Driver for Atheros 802.11a/b/g MiniPCI cards
-	  
-	  http://www.madwifi.org/
diff --git a/openwrt/target/linux/package/madwifi/Makefile b/openwrt/target/linux/package/madwifi/Makefile
deleted file mode 100644
index 1a50c5d1db..0000000000
--- a/openwrt/target/linux/package/madwifi/Makefile
+++ /dev/null
@@ -1,105 +0,0 @@
-# $Id$
-
-include $(TOPDIR)/rules.mk
-include ../../rules.mk
-
-PKG_NAME:=madwifi-ng
-PKG_VERSION:=r1590-20060523
-PKG_RELEASE:=1
-PKG_MD5SUM:=d3b32a2db92ff95cb0c3eb24a1017d9e
-
-PKG_SOURCE_URL:=http://snapshots.madwifi.org/$(PKG_NAME)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-ifeq ($(ARCH),mips)
-HAL_TARGET:=mips-be-elf
-endif
-ifeq ($(ARCH),mipsel)
-HAL_TARGET:=mips-le-elf
-endif
-ifeq ($(ARCH),i386)
-HAL_TARGET:=i386-elf
-endif
-ifeq ($(ARCH),armeb)
-HAL_TARGET:=xscale-be-elf
-endif
-
-BUS := PCI
-
-ifneq ($(BR2_LINUX_2_4_AR531X),)
-	BUS := AHB
-endif
-ifneq ($(BR2_LINUX_2_6_ARUBA),)
-	BUS := PCI AHB	# no suitable HAL for AHB yet.
-endif
-
-BUS_MODULES:=
-ifeq ($(findstring AHB,$(BUS)),AHB)
-BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
-endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
-BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
-endif
-
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_MADWIFI,kmod-madwifi,$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-$(PKG_BUILD_DIR)/.configured:
-	touch $@
-
-MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
-		PATH="$(TARGET_PATH)" \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		TARGET="$(HAL_TARGET)" \
-		TOOLPREFIX="$(KERNEL_CROSS)" \
-		TOOLPATH="$(KERNEL_CROSS)" \
-		KERNELPATH="$(LINUX_DIR)" \
-		DOMULTI=1
-
-
-$(PKG_BUILD_DIR)/.built:
-ifeq ($(findstring AHB,$(BUS)),AHB)
-	$(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" all
-endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
-	$(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" all
-endif
-	$(RSTRIP) $(PKG_BUILD_DIR)/tools/madwifi_multi
-	touch $@
-
-$(IPKG_KMOD_MADWIFI):
-	mkdir -p $(IDIR_KMOD_MADWIFI)/etc/modules.d
-	mkdir -p $(IDIR_KMOD_MADWIFI)/etc/init.d
-	mkdir -p $(IDIR_KMOD_MADWIFI)/lib/modules/$(LINUX_VERSION)
-	mkdir -p $(IDIR_KMOD_MADWIFI)/usr/sbin
-	install -m0644 ./files/madwifi.modules $(IDIR_KMOD_MADWIFI)/etc/modules.d/20-madwifi
-	install -m0755 ./files/madwifi.init $(IDIR_KMOD_MADWIFI)/etc/init.d/S20madwifi
-	$(CP)	$(PKG_BUILD_DIR)/net80211/wlan*.$(LINUX_KMOD_SUFFIX) \
-		$(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
-		$(BUS_MODULES) \
-		$(PKG_BUILD_DIR)/ath_rate/sample/ath_rate_sample.$(LINUX_KMOD_SUFFIX) \
-		$(PKG_BUILD_DIR)/net80211/*.$(LINUX_KMOD_SUFFIX) \
-		$(IDIR_KMOD_MADWIFI)/lib/modules/$(LINUX_VERSION)/
-	$(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211debug,80211stats,athchans,athctrl,athdebug,athkey,athstats,wlanconfig} $(IDIR_KMOD_MADWIFI)/usr/sbin/
-	$(IPKG_BUILD) $(IDIR_KMOD_MADWIFI) $(PACKAGE_DIR)
-
-$(STAGING_DIR)/usr/include/madwifi/net80211/ieee80211.h: $(PKG_BUILD_DIR)/.built
-	mkdir -p $(STAGING_DIR)/usr/include/madwifi
-	$(CP) $(PKG_BUILD_DIR)/include $(STAGING_DIR)/usr/include/madwifi/
-	mkdir -p $(STAGING_DIR)/usr/include/madwifi/net80211
-	$(CP) $(PKG_BUILD_DIR)/net80211/*.h $(STAGING_DIR)/usr/include/madwifi/net80211/
-	touch $@
-
-install-dev: $(STAGING_DIR)/usr/include/madwifi/net80211/ieee80211.h
-
-uninstall-dev:
-	rm -rf $(STAGING_DIR)/usr/include/madwifi
-
-compile-targets: install-dev
-clean-targets: uninstall-dev
diff --git a/openwrt/target/linux/package/madwifi/files/madwifi.init b/openwrt/target/linux/package/madwifi/files/madwifi.init
deleted file mode 100644
index b1e78c0930..0000000000
--- a/openwrt/target/linux/package/madwifi/files/madwifi.init
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/bin/sh
-iwpriv ath0 mode 3
diff --git a/openwrt/target/linux/package/madwifi/files/madwifi.modules b/openwrt/target/linux/package/madwifi/files/madwifi.modules
deleted file mode 100644
index eac01b66ee..0000000000
--- a/openwrt/target/linux/package/madwifi/files/madwifi.modules
+++ /dev/null
@@ -1,11 +0,0 @@
-wlan
-wlan_scan_ap
-wlan_scan_sta
-ath_hal
-ath_rate_sample
-ath_pci
-wlan_acl
-wlan_ccmp
-wlan_tkip
-wlan_wep
-wlan_xauth
diff --git a/openwrt/target/linux/package/madwifi/ipkg/kmod-madwifi.control b/openwrt/target/linux/package/madwifi/ipkg/kmod-madwifi.control
deleted file mode 100644
index ddab426b30..0000000000
--- a/openwrt/target/linux/package/madwifi/ipkg/kmod-madwifi.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-madwifi
-Priority: optional
-Section: net
-Description: Driver for Atheros 802.11a/b/g MiniPCI cards
diff --git a/openwrt/target/linux/package/madwifi/patches/100-kernel_cflags.patch b/openwrt/target/linux/package/madwifi/patches/100-kernel_cflags.patch
deleted file mode 100644
index ef283dd3f2..0000000000
--- a/openwrt/target/linux/package/madwifi/patches/100-kernel_cflags.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-diff -ru madwifi-ng-r1486-20060329/Makefile madwifi-ng-r1486-20060329-patch/Makefile
---- madwifi-ng-r1486-20060329/Makefile	2006-03-13 19:23:02.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/Makefile	2006-03-31 10:52:05.000000000 -0500
-@@ -51,7 +51,7 @@
- 
- all: modules tools
- 
--modules: configcheck svnversion.h
-+modules: svnversion.h
- 	mkdir -p ${SYMBOLSDIR}
- 	for i in ${DIRS_MODULES}; do \
- 		$(MAKE) -C $$i || exit 1; \
-diff -ru madwifi-ng-r1486-20060329/hal/public/mips-be-elf.inc madwifi-ng-r1486-20060329-patch/hal/public/mips-be-elf.inc
---- madwifi-ng-r1486-20060329/hal/public/mips-be-elf.inc	2006-03-28 03:46:27.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/hal/public/mips-be-elf.inc	2006-03-31 10:52:05.000000000 -0500
-@@ -66,5 +66,5 @@
- 
- LDOPTS=	-EB
- COPTS+=	-DAH_BYTE_ORDER=AH_BIG_ENDIAN
--COPTS+=	-G 0 -EB -mno-abicalls -fno-pic -Wa,--trap \
-+COPTS+=	-G 0 -EB -mno-abicalls -fno-pic -Wa,--trap -mips32 \
- 	-fno-strict-aliasing -fno-common -fomit-frame-pointer -mlong-calls
-diff -ru madwifi-ng-r1486-20060329/hal/public/mips-le-elf.inc madwifi-ng-r1486-20060329-patch/hal/public/mips-le-elf.inc
---- madwifi-ng-r1486-20060329/hal/public/mips-le-elf.inc	2006-03-28 03:46:27.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/hal/public/mips-le-elf.inc	2006-03-31 10:52:05.000000000 -0500
-@@ -63,5 +63,5 @@
- 
- LDOPTS=	-EL
- COPTS+=	-DAH_BYTE_ORDER=AH_LITTLE_ENDIAN
--COPTS+=	-G 0 -EL -mno-abicalls -fno-pic -Wa,--trap \
-+COPTS+=	-G 0 -EL -mno-abicalls -fno-pic -Wa,--trap -mips32 \
- 	-fno-strict-aliasing -fno-common -fomit-frame-pointer -mlong-calls
-diff -ur madwifi-ng-r1486-20060329/hal/public/xscale-be-elf.inc madwifi-ng-r1486-20060329-patch/hal/public/xscale-be-elf.inc
---- madwifi-ng-r1486-20060329/hal/public/xscale-be-elf.inc	2006-02-11 13:04:39.000000000 +0100
-+++ madwifi-ng-r1486-20060329-patch/hal/public/xscale-be-elf.inc	2006-04-16 15:07:59.000000000 +0200
-@@ -72,5 +72,5 @@
- 
- LDOPTS=	-EB
- COPTS+=	-DAH_BYTE_ORDER=AH_BIG_ENDIAN -DAH_REGOPS_FUNC
--COPTS+= -march=armv4 -mbig-endian -fno-strict-aliasing -fno-common -mapcs-32 \
--	-mtune=xscale  -mshort-load-bytes -msoft-float -mfp=2
-+COPTS+= -mcpu=xscale -mbig-endian -fno-strict-aliasing -fno-common \
-+	-msoft-float -mfp=2
diff --git a/openwrt/target/linux/package/madwifi/patches/101-no_werror.patch b/openwrt/target/linux/package/madwifi/patches/101-no_werror.patch
deleted file mode 100644
index 40eddc669f..0000000000
--- a/openwrt/target/linux/package/madwifi/patches/101-no_werror.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -ru madwifi-ng-r1486-20060329/Makefile.inc madwifi-ng-r1486-20060329-patch/Makefile.inc
---- madwifi-ng-r1486-20060329/Makefile.inc	2006-03-21 15:21:12.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/Makefile.inc	2006-03-29 16:44:41.000000000 -0500
-@@ -193,7 +193,7 @@
- # 
- TOOLS=  ${DEPTH}/tools 
- 
--COPTS+=	-Werror
-+#COPTS+=	-Werror
- INCS=	-include ${obj}/${DEPTH}/include/compat.h -I${obj}/${DEPTH}/include
- 
- ifeq ($(strip ${BUS}),AHB)
diff --git a/openwrt/target/linux/package/madwifi/patches/102-multicall_binary.patch b/openwrt/target/linux/package/madwifi/patches/102-multicall_binary.patch
deleted file mode 100644
index 8f20e467b8..0000000000
--- a/openwrt/target/linux/package/madwifi/patches/102-multicall_binary.patch
+++ /dev/null
@@ -1,740 +0,0 @@
-diff -ruN madwifi-ng-r1486-20060329/102-multicall_binary.patch madwifi-ng-r1486-20060329-patch/102-multicall_binary.patch
---- madwifi-ng-r1486-20060329/102-multicall_binary.patch	1969-12-31 19:00:00.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/102-multicall_binary.patch	2006-03-31 10:58:27.000000000 -0500
-@@ -0,0 +1,367 @@
-+diff -urN madwifi-ng-r1416-20060126/tools/80211debug.c madwifi-ng-r1416-20060126-owrt/tools/80211debug.c
-+--- madwifi-ng-r1416-20060126/tools/80211debug.c	2005-11-23 22:23:20.000000000 +0100
-++++ madwifi-ng-r1416-20060126-owrt/tools/80211debug.c	2006-01-26 11:26:44.000000000 +0100
-+@@ -49,6 +49,10 @@
-+ #include <getopt.h>
-+ #include <err.h>
-+ 
-++#ifdef DOMULTI
-++#include "do_multi.h"
-++#endif
-++
-+ #define	N(a)	(sizeof(a)/sizeof(a[0]))
-+ 
-+ const char *progname;
-+@@ -176,9 +180,19 @@
-+ }
-+ #endif /* __linux__ */
-+ 
-++#ifdef DOMULTI
-++
-++int
-++a80211debug_init(int argc, char *argv[])
-++{
-++
-++#else
-++
-+ int
-+ main(int argc, char *argv[])
-+ {
-++
-++#endif
-+ 	const char *ifname = "ath0";
-+ 	const char *cp, *tp;
-+ 	const char *sep;
-+diff -urN madwifi-ng-r1416-20060126/tools/80211stats.c madwifi-ng-r1416-20060126-owrt/tools/80211stats.c
-+--- madwifi-ng-r1416-20060126/tools/80211stats.c	2005-11-23 22:52:24.000000000 +0100
-++++ madwifi-ng-r1416-20060126-owrt/tools/80211stats.c	2006-01-26 11:26:44.000000000 +0100
-+@@ -58,6 +58,10 @@
-+ #include "net80211/ieee80211_crypto.h"
-+ #include "net80211/ieee80211_ioctl.h"
-+ 
-++#ifdef DOMULTI
-++#include "do_multi.h"
-++#endif
-++
-+ #ifndef SIOCG80211STATS
-+ #define	SIOCG80211STATS	(SIOCDEVPRIVATE+2)
-+ #endif
-+@@ -239,9 +243,19 @@
-+ #undef STAT
-+ }
-+ 
-++#ifdef DOMULTI
-++
-++int
-++a80211stats_init(int argc, char *argv[])
-++{
-++
-++#else
-++
-+ int
-+ main(int argc, char *argv[])
-+ {
-++
-++#endif
-+ 	int c, len;
-+ 	struct ieee80211req_sta_info *si;
-+ 	u_int8_t buf[24*1024], *cp;
-+diff -urN madwifi-ng-r1416-20060126/tools/athchans.c madwifi-ng-r1416-20060126-owrt/tools/athchans.c
-+--- madwifi-ng-r1416-20060126/tools/athchans.c	2005-11-24 00:07:30.000000000 +0100
-++++ madwifi-ng-r1416-20060126-owrt/tools/athchans.c	2006-01-26 11:26:44.000000000 +0100
-+@@ -57,6 +57,10 @@
-+ #include "net80211/ieee80211_crypto.h"
-+ #include "net80211/ieee80211_ioctl.h"
-+ 
-++#ifdef DOMULTI
-++#include "do_multi.h"
-++#endif
-++
-+ static	int s = -1;
-+ const char *progname;
-+ 
-+@@ -134,9 +138,20 @@
-+ }
-+ 
-+ #define	MAXCHAN	((int)(sizeof(struct ieee80211req_chanlist) * NBBY))
-++
-++#ifdef DOMULTI
-++
-++int
-++athchans_init(int argc, char *argv[])
-++{
-++
-++#else
-++
-+ int
-+ main(int argc, char *argv[])
-+ {
-++
-++#endif
-+ 	const char *ifname = "wifi0";
-+ 	struct ieee80211req_chanlist chanlist;
-+ 	int c;
-+diff -urN madwifi-ng-r1416-20060126/tools/athctrl.c madwifi-ng-r1416-20060126-owrt/tools/athctrl.c
-+--- madwifi-ng-r1416-20060126/tools/athctrl.c	2005-11-23 22:23:20.000000000 +0100
-++++ madwifi-ng-r1416-20060126-owrt/tools/athctrl.c	2006-01-26 11:26:44.000000000 +0100
-+@@ -52,6 +52,10 @@
-+ 
-+ #include <net/if.h>
-+ 
-++#ifdef DOMULTI
-++#include "do_multi.h"
-++#endif
-++
-+ static int
-+ setsysctrl(const char *dev, const char *control , u_long value)
-+ {
-+@@ -83,9 +87,19 @@
-+     exit(1);
-+ }
-+ 
-++#ifdef DOMULTI
-++
-++int
-++athctrl_init(int argc, char *argv[])
-++{
-++
-++#else
-++
-+ int
-+ main(int argc, char *argv[])
-+ {
-++
-++#endif
-+ 	char device[IFNAMSIZ + 1];
-+ 	int distance = -1;
-+ 	int c;
-+diff -urN madwifi-ng-r1416-20060126/tools/athdebug.c madwifi-ng-r1416-20060126-owrt/tools/athdebug.c
-+--- madwifi-ng-r1416-20060126/tools/athdebug.c	2005-11-23 22:23:20.000000000 +0100
-++++ madwifi-ng-r1416-20060126-owrt/tools/athdebug.c	2006-01-26 11:26:44.000000000 +0100
-+@@ -52,6 +52,10 @@
-+ #include <getopt.h>
-+ #include <err.h>
-+ 
-++#ifdef DOMULTI
-++#include "do_multi.h"
-++#endif
-++
-+ #define	N(a)	(sizeof(a)/sizeof(a[0]))
-+ 
-+ const char *progname;
-+@@ -170,9 +174,20 @@
-+ }
-+ #endif /* __linux__ */
-+ 
-++#ifdef DOMULTI
-++
-++int
-++athdebug_init(int argc, char *argv[])
-++{
-++
-++#else
-++
-+ int
-+ main(int argc, char *argv[])
-+ {
-++
-++#endif
-++
-+ #ifdef __linux__
-+ 	const char *ifname = "wifi0";
-+ #else
-+diff -urN madwifi-ng-r1416-20060126/tools/athkey.c madwifi-ng-r1416-20060126-owrt/tools/athkey.c
-+--- madwifi-ng-r1416-20060126/tools/athkey.c	2005-11-24 00:07:30.000000000 +0100
-++++ madwifi-ng-r1416-20060126-owrt/tools/athkey.c	2006-01-26 11:26:44.000000000 +0100
-+@@ -57,6 +57,10 @@
-+ #include "net80211/ieee80211_crypto.h"
-+ #include "net80211/ieee80211_ioctl.h"
-+ 
-++#ifdef DOMULTI
-++#include "do_multi.h"
-++#endif
-++
-+ static	int s = -1;
-+ const char *progname;
-+ 
-+@@ -207,9 +211,19 @@
-+ 	exit(-1);
-+ }
-+ 
-++#ifdef DOMULTI
-++
-++int
-++athkey_init(int argc, char *argv[])
-++{
-++
-++#else
-++
-+ int
-+ main(int argc, char *argv[])
-+ {
-++
-++#endif
-+ 	const char *ifname = "wifi0";
-+ 	struct ieee80211req_key setkey;
-+ 	struct ieee80211req_del_key delkey;
-+diff -urN madwifi-ng-r1416-20060126/tools/athstats.c madwifi-ng-r1416-20060126-owrt/tools/athstats.c
-+--- madwifi-ng-r1416-20060126/tools/athstats.c	2006-01-16 09:59:07.000000000 +0100
-++++ madwifi-ng-r1416-20060126-owrt/tools/athstats.c	2006-01-26 11:26:44.000000000 +0100
-+@@ -64,6 +64,10 @@
-+ #include "ah_desc.h"
-+ #include "if_athioctl.h"
-+ 
-++#ifdef DOMULTI
-++#include "do_multi.h"
-++#endif
-++
-+ static const struct {
-+ 	u_int		phyerr;
-+ 	const char*	desc;
-+@@ -242,9 +246,20 @@
-+ 	signalled = 1;
-+ }
-+ 
-++#ifdef DOMULTI
-++
-++int
-++athstats_init(int argc, char *argv[])
-++{
-++
-++#else
-++
-+ int
-+ main(int argc, char *argv[])
-+ {
-++
-++#endif
-++
-+ #ifdef __linux__
-+ 	const char *ifname = "wifi0";
-+ #else
-+diff -urN madwifi-ng-r1416-20060126/tools/do_multi.c madwifi-ng-r1416-20060126-owrt/tools/do_multi.c
-+--- madwifi-ng-r1416-20060126/tools/do_multi.c	1970-01-01 01:00:00.000000000 +0100
-++++ madwifi-ng-r1416-20060126-owrt/tools/do_multi.c	2006-01-26 11:26:44.000000000 +0100
-+@@ -0,0 +1,30 @@
-++#include <string.h>
-++#include "do_multi.h"
-++
-++int
-++main(int argc, char *argv[])
-++{
-++    char *progname;
-++    int ret = 0;
-++
-++    progname = basename(argv[0]);
-++
-++    if(strcmp(progname, "80211debug") == 0)
-++	ret = a80211debug_init(argc, argv);
-++    if(strcmp(progname, "80211stats") == 0)
-++	ret = a80211stats_init(argc, argv);
-++    if(strcmp(progname, "athchans") == 0)
-++	ret = athchans_init(argc, argv);
-++    if(strcmp(progname, "athctrl") == 0)
-++	ret =  athctrl_init(argc, argv);
-++    if(strcmp(progname, "athdebug") == 0)
-++	ret =  athdebug_init(argc, argv);
-++    if(strcmp(progname, "athkey") == 0)
-++	ret =  athkey_init(argc, argv);
-++    if(strcmp(progname, "athstats") == 0)
-++	ret =  athstats_init(argc, argv);
-++    if(strcmp(progname, "wlanconfig") == 0)
-++	ret =  wlanconfig_init(argc, argv);
-++    
-++    return ret;
-++}
-+diff -urN madwifi-ng-r1416-20060126/tools/do_multi.h madwifi-ng-r1416-20060126-owrt/tools/do_multi.h
-+--- madwifi-ng-r1416-20060126/tools/do_multi.h	1970-01-01 01:00:00.000000000 +0100
-++++ madwifi-ng-r1416-20060126-owrt/tools/do_multi.h	2006-01-26 11:26:44.000000000 +0100
-+@@ -0,0 +1,9 @@
-++
-++int a80211debug_init(int argc, char *argv[]);
-++int a80211stats_init(int argc, char *argv[]);
-++int athchans_init(int argc, char *argv[]);
-++int athctrl_init(int argc, char *argv[]);
-++int athdebug_init(int argc, char *argv[]);
-++int athkey_init(int argc, char *argv[]);
-++int athstats_init(int argc, char *argv[]);
-++int wlanconfig_init(int argc, char *argv[]);
-+diff -urN madwifi-ng-r1416-20060126/tools/Makefile madwifi-ng-r1416-20060126-owrt/tools/Makefile
-+--- madwifi-ng-r1416-20060126/tools/Makefile	2006-01-04 09:16:11.000000000 +0100
-++++ madwifi-ng-r1416-20060126-owrt/tools/Makefile	2006-01-26 14:52:45.000000000 +0100
-+@@ -50,6 +50,12 @@
-+ ALL=	athstats 80211stats athkey athchans athctrl \
-+ 	athdebug 80211debug wlanconfig
-+ 
-++ifdef DOMULTI
-++OBJS=	do_multi.o athstats.o 80211stats.o athkey.o athchans.o athctrl.o \
-++	athdebug.o 80211debug.o wlanconfig.o 
-++ALL=	${OBJS} madwifi_multi
-++endif
-++
-+ all:	${ALL}
-+ 
-+ INCS+=	-I. -I${HAL} -I${DEPTH}
-+@@ -59,6 +65,28 @@
-+ 
-+ all:	${ALL}
-+ 
-++athstats.o: athstats.c
-++	${CC} -c -o athstats.o -DDOMULTI=1 ${ALL_CFLAGS} -I../ath athstats.c
-++80211stats.o: 80211stats.c
-++	${CC} -c -o 80211stats.o -DDOMULTI=1 ${ALL_CFLAGS} 80211stats.c
-++athkey.o: athkey.c
-++	${CC} -c -o athkey.o -DDOMULTI=1 ${ALL_CFLAGS} athkey.c
-++athchans.o: athchans.c
-++	${CC} -c -o athchans.o -DDOMULTI=1 ${ALL_CFLAGS} athchans.c
-++athctrl.o: athctrl.c
-++	${CC} -c -o athctrl.o -DDOMULTI=1 ${ALL_CFLAGS} athctrl.c
-++athdebug.o: athdebug.c
-++	${CC} -c -o athdebug.o -DDOMULTI=1 ${ALL_CFLAGS} athdebug.c
-++wlanconfig.o: wlanconfig.c
-++	${CC} -c -o wlanconfig.o -DDOMULTI=1 ${ALL_CFLAGS} wlanconfig.c
-++80211debug.o: 80211debug.c
-++	${CC} -c -o 80211debug.o -DDOMULTI=1 ${ALL_CFLAGS} 80211debug.c
-++madwifi_multi:
-++	${CC} -o madwifi_multi ${LDFLAGS} ${OBJS}
-++	for i in athstats 80211stats athkey athchans athctrl athdebug wlanconfig 80211debug; do \
-++	ln -s -f madwifi_multi $$i; \
-++	done
-++
-+ athstats: athstats.c
-+ 	${CC} -o athstats ${ALL_CFLAGS} -I../ath ${LDFLAGS} athstats.c
-+ 80211stats: 80211stats.c
-+diff -urN madwifi-ng-r1416-20060126/tools/wlanconfig.c madwifi-ng-r1416-20060126-owrt/tools/wlanconfig.c
-+--- madwifi-ng-r1416-20060126/tools/wlanconfig.c	2006-01-22 10:58:31.000000000 +0100
-++++ madwifi-ng-r1416-20060126-owrt/tools/wlanconfig.c	2006-01-26 11:26:44.000000000 +0100
-+@@ -57,6 +57,10 @@
-+ #include "net80211/ieee80211_crypto.h"
-+ #include "net80211/ieee80211_ioctl.h"
-+ 
-++#ifdef DOMULTI
-++#include "do_multi.h"
-++#endif
-++
-+ /*
-+  * These are taken from ieee80211_node.h
-+  */
-+@@ -91,9 +95,19 @@
-+ 
-+ int	verbose = 0;
-+ 
-++#ifdef DOMULTI
-++
-++int
-++wlanconfig_init(int argc, char *argv[])
-++{
-++
-++#else
-++
-+ int
-+ main(int argc, char *argv[])
-+ {
-++
-++#endif
-+ 	const char *ifname, *cmd;
-+ 
-+ 	if (argc < 2)
-diff -ruN madwifi-ng-r1486-20060329/tools/80211debug.c madwifi-ng-r1486-20060329-patch/tools/80211debug.c
---- madwifi-ng-r1486-20060329/tools/80211debug.c	2006-03-10 08:23:50.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/tools/80211debug.c	2006-03-31 10:58:27.000000000 -0500
-@@ -49,6 +49,10 @@
- #include <getopt.h>
- #include <err.h>
- 
-+#ifdef DOMULTI
-+#include "do_multi.h"
-+#endif
-+
- #define	N(a)	(sizeof(a)/sizeof(a[0]))
- 
- const char *progname;
-@@ -180,9 +184,19 @@
- }
- #endif /* __linux__ */
- 
-+#ifdef DOMULTI
-+
-+int
-+a80211debug_init(int argc, char *argv[])
-+{
-+
-+#else
-+
- int
- main(int argc, char *argv[])
- {
-+
-+#endif
- 	const char *ifname = "ath0";
- 	const char *cp, *tp;
- 	const char *sep;
-diff -ruN madwifi-ng-r1486-20060329/tools/80211stats.c madwifi-ng-r1486-20060329-patch/tools/80211stats.c
---- madwifi-ng-r1486-20060329/tools/80211stats.c	2006-03-10 08:23:50.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/tools/80211stats.c	2006-03-31 10:58:27.000000000 -0500
-@@ -58,6 +58,10 @@
- #include "net80211/ieee80211_crypto.h"
- #include "net80211/ieee80211_ioctl.h"
- 
-+#ifdef DOMULTI
-+#include "do_multi.h"
-+#endif
-+
- #ifndef SIOCG80211STATS
- #define	SIOCG80211STATS	(SIOCDEVPRIVATE + 2)
- #endif
-@@ -241,9 +245,19 @@
- #undef STAT
- }
- 
-+#ifdef DOMULTI
-+
-+int
-+a80211stats_init(int argc, char *argv[])
-+{
-+
-+#else
-+
- int
- main(int argc, char *argv[])
- {
-+
-+#endif
- 	int c, len;
- 	struct ieee80211req_sta_info *si;
- 	u_int8_t buf[24*1024], *cp;
-diff -ruN madwifi-ng-r1486-20060329/tools/Makefile madwifi-ng-r1486-20060329-patch/tools/Makefile
---- madwifi-ng-r1486-20060329/tools/Makefile	2006-01-04 03:16:11.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/tools/Makefile	2006-03-31 10:58:27.000000000 -0500
-@@ -50,6 +50,12 @@
- ALL=	athstats 80211stats athkey athchans athctrl \
- 	athdebug 80211debug wlanconfig
- 
-+ifdef DOMULTI
-+OBJS=	do_multi.o athstats.o 80211stats.o athkey.o athchans.o athctrl.o \
-+	athdebug.o 80211debug.o wlanconfig.o 
-+ALL=	${OBJS} madwifi_multi
-+endif
-+
- all:	${ALL}
- 
- INCS+=	-I. -I${HAL} -I${DEPTH}
-@@ -59,6 +65,30 @@
- 
- all:	${ALL}
- 
-+athstats.o: athstats.c
-+	${CC} -c -o athstats.o -DDOMULTI=1 ${ALL_CFLAGS} -I../ath athstats.c
-+80211stats.o: 80211stats.c
-+	${CC} -c -o 80211stats.o -DDOMULTI=1 ${ALL_CFLAGS} 80211stats.c
-+athkey.o: athkey.c
-+	${CC} -c -o athkey.o -DDOMULTI=1 ${ALL_CFLAGS} athkey.c
-+athchans.o: athchans.c
-+	${CC} -c -o athchans.o -DDOMULTI=1 ${ALL_CFLAGS} athchans.c
-+athctrl.o: athctrl.c
-+	${CC} -c -o athctrl.o -DDOMULTI=1 ${ALL_CFLAGS} athctrl.c
-+athdebug.o: athdebug.c
-+	${CC} -c -o athdebug.o -DDOMULTI=1 ${ALL_CFLAGS} athdebug.c
-+wlanconfig.o: wlanconfig.c
-+	${CC} -c -o wlanconfig.o -DDOMULTI=1 ${ALL_CFLAGS} wlanconfig.c
-+80211debug.o: 80211debug.c
-+	${CC} -c -o 80211debug.o -DDOMULTI=1 ${ALL_CFLAGS} 80211debug.c
-+do_multi.o: do_multi.c
-+	${CC} -c -o do_multi.o -DDOMULTI=1 ${ALL_CFLAGS} do_multi.c
-+madwifi_multi:
-+	${CC} -o madwifi_multi ${LDFLAGS} ${OBJS}
-+	for i in athstats 80211stats athkey athchans athctrl athdebug wlanconfig 80211debug; do \
-+	ln -s -f madwifi_multi $$i; \
-+	done
-+
- athstats: athstats.c
- 	${CC} -o athstats ${ALL_CFLAGS} -I../ath ${LDFLAGS} athstats.c
- 80211stats: 80211stats.c
-diff -ruN madwifi-ng-r1486-20060329/tools/athchans.c madwifi-ng-r1486-20060329-patch/tools/athchans.c
---- madwifi-ng-r1486-20060329/tools/athchans.c	2006-02-01 15:07:11.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/tools/athchans.c	2006-03-31 10:58:27.000000000 -0500
-@@ -57,6 +57,10 @@
- #include "net80211/ieee80211_crypto.h"
- #include "net80211/ieee80211_ioctl.h"
- 
-+#ifdef DOMULTI
-+#include "do_multi.h"
-+#endif
-+
- static	int s = -1;
- const char *progname;
- 
-@@ -134,9 +138,20 @@
- }
- 
- #define	MAXCHAN	((int)(sizeof(struct ieee80211req_chanlist) * NBBY))
-+
-+#ifdef DOMULTI
-+
-+int
-+athchans_init(int argc, char *argv[])
-+{
-+
-+#else
-+
- int
- main(int argc, char *argv[])
- {
-+
-+#endif
- 	const char *ifname = "wifi0";
- 	struct ieee80211req_chanlist chanlist;
- 	int c;
-diff -ruN madwifi-ng-r1486-20060329/tools/athctrl.c madwifi-ng-r1486-20060329-patch/tools/athctrl.c
---- madwifi-ng-r1486-20060329/tools/athctrl.c	2006-02-03 07:03:03.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/tools/athctrl.c	2006-03-31 10:58:27.000000000 -0500
-@@ -53,6 +53,10 @@
- 
- #include <net/if.h>
- 
-+#ifdef DOMULTI
-+#include "do_multi.h"
-+#endif
-+
- static int
- setsysctrl(const char *dev, const char *control , u_long value)
- {
-@@ -87,9 +91,19 @@
-     exit(1);
- }
- 
-+#ifdef DOMULTI
-+
-+int
-+athctrl_init(int argc, char *argv[])
-+{
-+
-+#else
-+
- int
- main(int argc, char *argv[])
- {
-+
-+#endif
- 	char device[IFNAMSIZ + 1];
- 	int distance = -1;
- 	int c;
-diff -ruN madwifi-ng-r1486-20060329/tools/athdebug.c madwifi-ng-r1486-20060329-patch/tools/athdebug.c
---- madwifi-ng-r1486-20060329/tools/athdebug.c	2006-03-10 08:23:50.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/tools/athdebug.c	2006-03-31 10:58:27.000000000 -0500
-@@ -52,6 +52,10 @@
- #include <getopt.h>
- #include <err.h>
- 
-+#ifdef DOMULTI
-+#include "do_multi.h"
-+#endif
-+
- #define	N(a)	(sizeof(a)/sizeof(a[0]))
- 
- const char *progname;
-@@ -171,9 +175,20 @@
- }
- #endif /* __linux__ */
- 
-+#ifdef DOMULTI
-+
-+int
-+athdebug_init(int argc, char *argv[])
-+{
-+
-+#else
-+
- int
- main(int argc, char *argv[])
- {
-+
-+#endif
-+
- #ifdef __linux__
- 	const char *ifname = "wifi0";
- #else
-diff -ruN madwifi-ng-r1486-20060329/tools/athkey.c madwifi-ng-r1486-20060329-patch/tools/athkey.c
---- madwifi-ng-r1486-20060329/tools/athkey.c	2006-02-01 15:07:11.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/tools/athkey.c	2006-03-31 10:58:27.000000000 -0500
-@@ -57,6 +57,10 @@
- #include "net80211/ieee80211_crypto.h"
- #include "net80211/ieee80211_ioctl.h"
- 
-+#ifdef DOMULTI
-+#include "do_multi.h"
-+#endif
-+
- static int s = -1;
- const char *progname;
- 
-@@ -207,9 +211,19 @@
- 	exit(-1);
- }
- 
-+#ifdef DOMULTI
-+
-+int
-+athkey_init(int argc, char *argv[])
-+{
-+
-+#else
-+
- int
- main(int argc, char *argv[])
- {
-+
-+#endif
- 	const char *ifname = "wifi0";
- 	struct ieee80211req_key setkey;
- 	struct ieee80211req_del_key delkey;
-diff -ruN madwifi-ng-r1486-20060329/tools/athstats.c madwifi-ng-r1486-20060329-patch/tools/athstats.c
---- madwifi-ng-r1486-20060329/tools/athstats.c	2006-02-01 15:07:11.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/tools/athstats.c	2006-03-31 10:58:27.000000000 -0500
-@@ -64,6 +64,10 @@
- #include "ah_desc.h"
- #include "if_athioctl.h"
- 
-+#ifdef DOMULTI
-+#include "do_multi.h"
-+#endif
-+
- static const struct {
- 	u_int		phyerr;
- 	const char*	desc;
-@@ -242,9 +246,20 @@
- 	signalled = 1;
- }
- 
-+#ifdef DOMULTI
-+
-+int
-+athstats_init(int argc, char *argv[])
-+{
-+
-+#else
-+
- int
- main(int argc, char *argv[])
- {
-+
-+#endif
-+
- #ifdef __linux__
- 	const char *ifname = "wifi0";
- #else
-diff -ruN madwifi-ng-r1486-20060329/tools/do_multi.c madwifi-ng-r1486-20060329-patch/tools/do_multi.c
---- madwifi-ng-r1486-20060329/tools/do_multi.c	1969-12-31 19:00:00.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/tools/do_multi.c	2006-03-31 10:58:27.000000000 -0500
-@@ -0,0 +1,30 @@
-+#include <string.h>
-+#include "do_multi.h"
-+
-+int
-+main(int argc, char *argv[])
-+{
-+    char *progname;
-+    int ret = 0;
-+
-+    progname = basename(argv[0]);
-+
-+    if(strcmp(progname, "80211debug") == 0)
-+	ret = a80211debug_init(argc, argv);
-+    if(strcmp(progname, "80211stats") == 0)
-+	ret = a80211stats_init(argc, argv);
-+    if(strcmp(progname, "athchans") == 0)
-+	ret = athchans_init(argc, argv);
-+    if(strcmp(progname, "athctrl") == 0)
-+	ret =  athctrl_init(argc, argv);
-+    if(strcmp(progname, "athdebug") == 0)
-+	ret =  athdebug_init(argc, argv);
-+    if(strcmp(progname, "athkey") == 0)
-+	ret =  athkey_init(argc, argv);
-+    if(strcmp(progname, "athstats") == 0)
-+	ret =  athstats_init(argc, argv);
-+    if(strcmp(progname, "wlanconfig") == 0)
-+	ret =  wlanconfig_init(argc, argv);
-+    
-+    return ret;
-+}
-diff -ruN madwifi-ng-r1486-20060329/tools/do_multi.h madwifi-ng-r1486-20060329-patch/tools/do_multi.h
---- madwifi-ng-r1486-20060329/tools/do_multi.h	1969-12-31 19:00:00.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/tools/do_multi.h	2006-03-31 10:58:27.000000000 -0500
-@@ -0,0 +1,9 @@
-+
-+int a80211debug_init(int argc, char *argv[]);
-+int a80211stats_init(int argc, char *argv[]);
-+int athchans_init(int argc, char *argv[]);
-+int athctrl_init(int argc, char *argv[]);
-+int athdebug_init(int argc, char *argv[]);
-+int athkey_init(int argc, char *argv[]);
-+int athstats_init(int argc, char *argv[]);
-+int wlanconfig_init(int argc, char *argv[]);
-diff -ruN madwifi-ng-r1486-20060329/tools/wlanconfig.c madwifi-ng-r1486-20060329-patch/tools/wlanconfig.c
---- madwifi-ng-r1486-20060329/tools/wlanconfig.c	2006-02-01 15:07:11.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/tools/wlanconfig.c	2006-03-31 10:58:27.000000000 -0500
-@@ -59,6 +59,10 @@
- #include "net80211/ieee80211_crypto.h"
- #include "net80211/ieee80211_ioctl.h"
- 
-+#ifdef DOMULTI
-+#include "do_multi.h"
-+#endif
-+
- /*
-  * These are taken from ieee80211_node.h
-  */
-@@ -92,9 +96,19 @@
- 
- int verbose = 0;
- 
-+#ifdef DOMULTI
-+
-+int
-+wlanconfig_init(int argc, char *argv[])
-+{
-+
-+#else
-+
- int
- main(int argc, char *argv[])
- {
-+
-+#endif
- 	const char *ifname, *cmd;
- 
- 	if (argc < 2)
diff --git a/openwrt/target/linux/package/madwifi/patches/103-disable_rfkill.patch b/openwrt/target/linux/package/madwifi/patches/103-disable_rfkill.patch
deleted file mode 100644
index f5b3de1458..0000000000
--- a/openwrt/target/linux/package/madwifi/patches/103-disable_rfkill.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -urN madwifi.old/ath/if_ath.c madwifi.dev/ath/if_ath.c
---- madwifi.old/ath/if_ath.c	2006-06-08 17:20:12.000000000 +0200
-+++ madwifi.dev/ath/if_ath.c	2006-06-08 18:30:10.000000000 +0200
-@@ -252,7 +252,7 @@
- static int ath_outdoor = AH_FALSE;		/* enable outdoor use */
- static int ath_xchanmode = AH_TRUE;		/* enable extended channels */
- static char *autocreate = NULL;
--static int rfkill = -1;
-+static int rfkill = 0;
- static int countrycode = -1;
- static int outdoor = -1;
- static int xchanmode = -1;
diff --git a/openwrt/target/linux/package/madwifi/patches/104-apmode_by_default.patch b/openwrt/target/linux/package/madwifi/patches/104-apmode_by_default.patch
deleted file mode 100644
index bce07b50a0..0000000000
--- a/openwrt/target/linux/package/madwifi/patches/104-apmode_by_default.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -ruN madwifi-ng-r1486-20060329/ath/if_ath.c madwifi-ng-r1486-20060329-patch/ath/if_ath.c
---- madwifi-ng-r1486-20060329/ath/if_ath.c	2006-03-23 15:12:18.000000000 -0500
-+++ madwifi-ng-r1486-20060329-patch/ath/if_ath.c	2006-03-31 11:00:30.000000000 -0500
-@@ -388,7 +388,7 @@
- 	struct ath_hal *ah;
- 	HAL_STATUS status;
- 	int error = 0, i;
--	int autocreatemode = IEEE80211_M_STA;
-+	int autocreatemode = IEEE80211_M_HOSTAP;
- 	u_int8_t csz;
- 
- 	sc->devid = devid;
diff --git a/openwrt/target/linux/package/madwifi/patches/105-slab_fix.patch b/openwrt/target/linux/package/madwifi/patches/105-slab_fix.patch
deleted file mode 100644
index 8de7dc7e43..0000000000
--- a/openwrt/target/linux/package/madwifi/patches/105-slab_fix.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-diff -ruN madwifi-ng-r1590-20060523/net80211/ieee80211_linux.c madwifi-ng-r1590-20060523-patch/net80211/ieee80211_linux.c
---- madwifi-ng-r1590-20060523/net80211/ieee80211_linux.c	2006-06-13 14:26:25 -04:00
-+++ madwifi-ng-r1590-20060523-patch/net80211/ieee80211_linux.c	2006-06-13 14:26:41 -04:00
-@@ -44,6 +44,7 @@
- #include <linux/etherdevice.h>
- #include <linux/if_vlan.h>
- #include <linux/vmalloc.h>
-+#include <linux/slab.h>
- 
- #include <net/iw_handler.h>
- #include <linux/wireless.h>
diff --git a/openwrt/target/linux/package/mini_fo/Config.in b/openwrt/target/linux/package/mini_fo/Config.in
deleted file mode 100644
index a92ff9785a..0000000000
--- a/openwrt/target/linux/package/mini_fo/Config.in
+++ /dev/null
@@ -1,6 +0,0 @@
-config BR2_PACKAGE_KMOD_MINI_FO
-	prompt "kmod-mini_fo...................... mini fanout overlay file system"
-	tristate
-	default m if CONFIG_DEVEL
-	help
-	  The mini fanout overlay file system.
diff --git a/openwrt/target/linux/package/mini_fo/Makefile b/openwrt/target/linux/package/mini_fo/Makefile
deleted file mode 100644
index dcd5b91f3a..0000000000
--- a/openwrt/target/linux/package/mini_fo/Makefile
+++ /dev/null
@@ -1,42 +0,0 @@
-# $Id$
-
-include $(TOPDIR)/rules.mk
-include ../../rules.mk
-
-PKG_NAME := mini_fo
-PKG_VERSION := 0.6.2pre1
-PKG_RELEASE := 1
-PKG_MD5SUM := acd12157be25d7b3c8df90914049403e
-
-PKG_SOURCE_URL := http://www.denx.de/twiki/pub/Know/MiniFOHome/
-PKG_SOURCE := mini_fo-0-6-2-pre1.tar.bz2
-PKG_CAT := bzcat
-
-PKG_BUILD_DIR := $(BUILD_DIR)/mini_fo-0-6-2-pre1
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_MINI_FO,kmod-mini-fo,$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-$(PKG_BUILD_DIR)/.configured:
-	touch $@
-
-$(PKG_BUILD_DIR)/.built: 
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		PATH="$(TARGET_PATH)" \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		KERNELVERSION="$(KERNEL)" \
-		KERNEL_SRC="$(LINUX_DIR)" \
-		all
-	touch $@
-
-$(IPKG_KMOD_MINI_FO):
-	install -m0755 -d $(IDIR_KMOD_MINI_FO)/lib/modules/$(LINUX_VERSION)
-	install -m0755 -d $(IDIR_KMOD_MINI_FO)/etc/modules.d
-	$(CP) $(PKG_BUILD_DIR)/mini_fo.$(LINUX_KMOD_SUFFIX) \
-	 $(IDIR_KMOD_MINI_FO)/lib/modules/$(LINUX_VERSION)/
-	echo "mini_fo" > $(IDIR_KMOD_MINI_FO)/etc/modules.d/15-mini-fo
-	$(IPKG_BUILD) $(IDIR_KMOD_MINI_FO) $(PACKAGE_DIR)
-
diff --git a/openwrt/target/linux/package/mini_fo/ipkg/kmod-mini-fo.control b/openwrt/target/linux/package/mini_fo/ipkg/kmod-mini-fo.control
deleted file mode 100644
index 9ccdc5fa79..0000000000
--- a/openwrt/target/linux/package/mini_fo/ipkg/kmod-mini-fo.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-mini-fo
-Priority: optional
-Section: sys
-Description: mini fanout overlay file system
diff --git a/openwrt/target/linux/package/mini_fo/patches/101-kmod_build.patch b/openwrt/target/linux/package/mini_fo/patches/101-kmod_build.patch
deleted file mode 100644
index 9b47a69ab7..0000000000
--- a/openwrt/target/linux/package/mini_fo/patches/101-kmod_build.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-diff -Nur mini_fo-0-6-2-pre1/Makefile mini_fo-0-6-2-pre1.patched/Makefile
---- mini_fo-0-6-2-pre1/Makefile	2005-10-15 12:49:43.000000000 +0200
-+++ mini_fo-0-6-2-pre1.patched/Makefile	2005-12-25 14:03:36.864205250 +0100
-@@ -26,36 +26,29 @@
- # allow custom override of TOPINC for fistgen developers
- -include fistdev.mk
- 
-+obj-m := mini_fo.o
-+mini_fo-objs   := meta.o dentry.o file.o inode.o main.o super.o state.o aux.o
-+
- ifeq ($(KERNELVERSION),2.4)
--CFLAGS = -D__KERNEL__ -DMODULE -DFISTGEN -I. ${TOPINC} -O2 -Wall -Wno-unused -g -fno-common -fno-schedule-insns -fno-schedule-insns2 -fno-strict-aliasing -msoft-float -Werror 
--ifeq ($(ARCH),um)
--CFLAGS += $(shell cd $(KERNEL_SRC) ; make script 'SCRIPT=@echo $$(CFLAGS)' ARCH=um)
--endif
--UCFLAGS = -DFISTGEN -I. ${TOPINC} -g -O2 -Wall -Wno-unused -Werror
--endif
- 
--CC	= $(CROSS_COMPILE)gcc
--LD	= $(CROSS_COMPILE)ld
-+O_TARGET := $(obj-m)
-+obj-y := $(mini_fo-objs)
- 
--obj-m := mini_fo.o
--mini_fo-objs   := meta.o dentry.o file.o inode.o main.o super.o state.o aux.o
-+-include $(TOPDIR)/Rules.make
-+
-+endif
- 
- all: mini_fo$(KERNELVERSION)
- 
--mini_fo2.4: ${obj-m}
-+mini_fo2.4:
-+	$(MAKE) -C ${KERNEL_SRC} TOPDIR="${KERNEL_SRC}" SUBDIRS=$(shell pwd) modules
- 
- mini_fo2.6:
--	make -C ${KERNEL_SRC} SUBDIRS=$(PWD) modules
--
--${obj-m}: ${mini_fo-objs}
--	$(LD) -o ${obj-m} -r ${mini_fo-objs}
--
--tags:
--	ctags -R -e
-+	$(MAKE) -C ${KERNEL_SRC} SUBDIRS=$(shell pwd) modules
- 
- clean:
- ifeq ($(KERNELVERSION),2.6)
--	-make -C ${KERNEL_SRC} SUBDIRS=$(PWD) clean
-+	-$(MAKE) -C ${KERNEL_SRC} SUBDIRS=$(shell pwd) clean
- endif
- 	rm -f ${obj-m} ${mini_fo-objs} ${obj-m:.o=.ko} *.d .*.flags *~
- 	rm -f TAGS
diff --git a/openwrt/target/linux/package/mini_fo/patches/102-mutex_change.patch b/openwrt/target/linux/package/mini_fo/patches/102-mutex_change.patch
deleted file mode 100644
index 4dec47bf5e..0000000000
--- a/openwrt/target/linux/package/mini_fo/patches/102-mutex_change.patch
+++ /dev/null
@@ -1,602 +0,0 @@
-From:  <mk@mary.denx.de>
-Date: Tue, 24 Jan 2006 14:09:21 +0000 (+0100)
-Subject:     Support for new mutex infrastructure
-X-Git-Url: http://www.denx.de/cgi-bin/gitweb.cgi?p=mini_fo.git;a=commitdiff;h=1dcc028729060ea83ea662155634b33ae8e2c493
-
-  Support for new mutex infrastructure
-  (7892f2f48d165a34b0b8130c8a195dfd807b8cb6)
----
-
---- a/ChangeLog
-+++ b/ChangeLog
-@@ -1,3 +1,13 @@
-+2006-01-24  Markus Klotzbuecher  <mk@mary.denx.de>
-+
-+	* Add tons of ugly ifdefs to Ed L. Cashin's mutex patch to
-+          retain backwards compatibility.
-+	
-+2006-01-24  Ed L. Cashin <ecashin@coraid.com>
-+
-+	* Support for the new mutex infrastructure
-+	(7892f2f48d165a34b0b8130c8a195dfd807b8cb6)
-+
- 2005-10-15  Markus Klotzbuecher  <mk@localhost.localdomain>
- 
- 	* Bugfix for a serious memory leak in mini_fo_follow_link.
---- a/aux.c
-+++ b/aux.c
-@@ -435,8 +435,11 @@ int build_sto_structure(dentry_t *dir, d
- 
- 	/* was:	hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
- 	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	down(&hidden_sto_dir_dentry->d_inode->i_sem);
--
-+#endif
- 	/* lets be safe */
- 	if(dtohd2(dir) != hidden_sto_dir_dentry) {
- 		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [2].\n");
-@@ -457,7 +460,11 @@ int build_sto_structure(dentry_t *dir, d
- 	if(err) {
- 		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [1].\n");
- 		/* was: unlock_dir(dir); */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_unlock(&dir->d_inode->i_mutex);
-+#else
- 		up(&dir->d_inode->i_sem);
-+#endif
- 		dput(dir);
- 		return err;
- 	}
-@@ -466,7 +473,11 @@ int build_sto_structure(dentry_t *dir, d
- 	if(!dtohd2(dentry)->d_inode) {
- 		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [2].\n");
- 		/* was: unlock_dir(dir); */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_unlock(&dir->d_inode->i_mutex);
-+#else
- 		up(&dir->d_inode->i_sem);
-+#endif
- 		dput(dir);
- 		return 1;
- 	}
-@@ -485,7 +496,11 @@ int build_sto_structure(dentry_t *dir, d
- 				 hidden_sto_dir_dentry->d_inode);
- 	dir->d_inode->i_nlink++;
- 	/* was: unlock_dir(hidden_sto_dir_dentry); */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 	dput(hidden_sto_dir_dentry);
- 	return 0;
- }
---- a/file.c
-+++ b/file.c
-@@ -613,18 +613,34 @@ mini_fo_fsync(file_t *file, dentry_t *de
- 	if ((hidden_file = ftohf(file)) != NULL) {
- 		hidden_dentry = dtohd(dentry);
- 		if (hidden_file->f_op && hidden_file->f_op->fsync) {
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+			mutex_lock(&hidden_dentry->d_inode->i_mutex);
-+#else
- 			down(&hidden_dentry->d_inode->i_sem);
-+#endif
- 			err1 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
-+#else
- 			up(&hidden_dentry->d_inode->i_sem);
-+#endif
- 		}
- 	}
- 
- 	if ((hidden_file = ftohf2(file)) != NULL) {
- 		hidden_dentry = dtohd2(dentry);
- 		if (hidden_file->f_op && hidden_file->f_op->fsync) {
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+			mutex_lock(&hidden_dentry->d_inode->i_mutex);
-+#else
- 			down(&hidden_dentry->d_inode->i_sem);
-+#endif
- 			err2 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
-+#else
- 			up(&hidden_dentry->d_inode->i_sem);
-+#endif
- 		}
- 	}
- 	else
---- a/inode.c
-+++ b/inode.c
-@@ -355,7 +355,11 @@ mini_fo_link(dentry_t *old_dentry, inode
- 
- 	/* was: hidden_dir_dentry = lock_parent(hidden_new_dentry); */
- 	hidden_dir_dentry = dget(hidden_new_dentry->d_parent);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
-+#else
- 	down(&hidden_dir_dentry->d_inode->i_sem);
-+#endif
- 
- 	err = vfs_link(hidden_old_dentry,
- 		       hidden_dir_dentry->d_inode,
-@@ -374,7 +378,11 @@ mini_fo_link(dentry_t *old_dentry, inode
- 
-  out_lock:
- 	/* was: unlock_dir(hidden_dir_dentry); */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
-+#else
- 	up(&hidden_dir_dentry->d_inode->i_sem);
-+#endif
- 	dput(hidden_dir_dentry);
- 
- 	dput(hidden_new_dentry);
-@@ -452,7 +460,11 @@ mini_fo_symlink(inode_t *dir, dentry_t *
- 	dget(hidden_sto_dentry);
- 	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
- 	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	down(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
- 	mode = S_IALLUGO;
-@@ -481,7 +493,11 @@ mini_fo_symlink(inode_t *dir, dentry_t *
- 	
-  out_lock:
-         /* was: unlock_dir(hidden_sto_dir_dentry); */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 	dput(hidden_sto_dir_dentry);
- 
-         dput(hidden_sto_dentry);
-@@ -524,7 +540,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
- 
- 		/* was:hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
- 		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 		down(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 
- 		/* avoid destroying the hidden inode if the file is in use */
- 		dget(hidden_sto_dentry);
-@@ -572,7 +592,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
- 					 dentry->d_name.len);
- 		}
- 		/* was: unlock_dir(hidden_sto_dir_dentry); */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 		up(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 		dput(hidden_sto_dir_dentry);
- 		goto out;
- 	}
-@@ -602,7 +626,12 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
- 
- 		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
- 		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 		down(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 
- 		/* avoid destroying the hidden inode if the file is in use */
- 		dget(hidden_sto_dentry);
-@@ -630,7 +659,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
- 		dtopd(dentry)->state = NON_EXISTANT;
- 
- 		/* was: unlock_dir(hidden_sto_dir_dentry); */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 		up(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 		dput(hidden_sto_dir_dentry);
- 
- 		goto out;
-@@ -641,7 +674,12 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
- 
- 		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
- 		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 		down(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 
- 		/* avoid destroying the hidden inode if the file is in use */
- 		dget(hidden_sto_dentry);
-@@ -668,7 +706,12 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
- 		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
- 		dtopd(dentry)->state = DELETED;
- 		/* was: unlock_dir(hidden_sto_dir_dentry); */
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 		up(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 		dput(hidden_sto_dir_dentry);
- 		goto out;
- 	}
-@@ -1294,11 +1337,19 @@ mini_fo_getxattr(struct dentry *dentry, 
- 		encoded_name = (char *)name;
- 		encoded_value = (char *)value;
- 
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_lock(&hidden_dentry->d_inode->i_mutex);
-+#else
- 		down(&hidden_dentry->d_inode->i_sem);
-+#endif
- 		/* lock_kernel() already done by caller. */
- 		err = hidden_dentry->d_inode->i_op->getxattr(hidden_dentry, encoded_name, encoded_value, size);
- 		/* unlock_kernel() will be done by caller. */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_lock(&hidden_dentry->d_inode->i_mutex);
-+#else
- 		up(&hidden_dentry->d_inode->i_sem);
-+#endif
- 	}
- 	return err;
- }
-@@ -1340,11 +1391,19 @@ mini_fo_setxattr(struct dentry *dentry, 
- 		encoded_name = (char *)name;
- 		encoded_value = (char *)value;
- 
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_lock(&hidden_dentry->d_inode->i_mutex);
-+#else
- 		down(&hidden_dentry->d_inode->i_sem);
-+#endif
- 		/* lock_kernel() already done by caller. */
- 		err = hidden_dentry->d_inode->i_op->setxattr(hidden_dentry, encoded_name, encoded_value, size, flags);
- 		/* unlock_kernel() will be done by caller. */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
-+#else
- 		up(&hidden_dentry->d_inode->i_sem);
-+#endif
- 	}
- 	return err;
- }
-@@ -1372,11 +1431,19 @@ mini_fo_removexattr(struct dentry *dentr
- 	if (hidden_dentry->d_inode->i_op->removexattr) {
- 		encoded_name = (char *)name;
- 
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_lock(&hidden_dentry->d_inode->i_mutex);
-+#else
- 		down(&hidden_dentry->d_inode->i_sem);
-+#endif
- 		/* lock_kernel() already done by caller. */
- 		err = hidden_dentry->d_inode->i_op->removexattr(hidden_dentry, encoded_name);
- 		/* unlock_kernel() will be done by caller. */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
-+#else
- 		up(&hidden_dentry->d_inode->i_sem);
-+#endif
- 	}
- 	return err;
- }
-@@ -1403,11 +1470,20 @@ mini_fo_listxattr(struct dentry *dentry,
- 
- 	if (hidden_dentry->d_inode->i_op->listxattr) {
- 		encoded_list = list;
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_lock(&hidden_dentry->d_inode->i_mutex);
-+#else
- 		down(&hidden_dentry->d_inode->i_sem);
-+#endif
- 		/* lock_kernel() already done by caller. */
- 		err = hidden_dentry->d_inode->i_op->listxattr(hidden_dentry, encoded_list, size);
- 		/* unlock_kernel() will be done by caller. */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
-+#else
- 		up(&hidden_dentry->d_inode->i_sem);
-+#endif
- 	}
- 	return err;
- }
---- a/meta.c
-+++ b/meta.c
-@@ -650,9 +650,20 @@ int meta_sync_d_list(dentry_t *dentry, i
- 		struct iattr newattrs;
-                 newattrs.ia_size = 0;
-                 newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_lock(&meta_dentry->d_inode->i_mutex);
-+#else
-                 down(&meta_dentry->d_inode->i_sem);
-+#endif
-                 err = notify_change(meta_dentry, &newattrs);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_unlock(&meta_dentry->d_inode->i_mutex);
-+#else
-                 up(&meta_dentry->d_inode->i_sem);
-+#endif
-+
-                 if(err || meta_dentry->d_inode->i_size != 0) {
-                         printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
-                                           ERROR truncating meta file.\n");
-@@ -780,9 +791,19 @@ int meta_sync_r_list(dentry_t *dentry, i
- 		struct iattr newattrs;
-                 newattrs.ia_size = 0;
-                 newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_lock(&meta_dentry->d_inode->i_mutex);
-+#else
-                 down(&meta_dentry->d_inode->i_sem);
-+#endif
-                 err = notify_change(meta_dentry, &newattrs);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_unlock(&meta_dentry->d_inode->i_mutex);
-+#else
-                 up(&meta_dentry->d_inode->i_sem);
-+#endif
-                 if(err || meta_dentry->d_inode->i_size != 0) {
-                         printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
-                                           ERROR truncating meta file.\n");
---- a/mini_fo.h
-+++ b/mini_fo.h
-@@ -433,6 +433,33 @@ fist_copy_attr_all(inode_t *dest, const 
- 
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
- /* copied from linux/fs.h */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+static inline void double_lock(struct dentry *d1, struct dentry *d2)
-+{
-+	struct mutex *m1 = &d1->d_inode->i_mutex;
-+	struct mutex *m2 = &d2->d_inode->i_mutex;
-+	if (m1 != m2) {
-+		if ((unsigned long) m1 < (unsigned long) m2) {
-+			struct mutex *tmp = m2;
-+			m2 = m1; m1 = tmp;
-+		}
-+		mutex_lock(m1);
-+	}
-+	mutex_lock(m2);
-+}
-+
-+static inline void double_unlock(struct dentry *d1, struct dentry *d2)
-+{
-+	struct mutex *m1 = &d1->d_inode->i_mutex;
-+	struct mutex *m2 = &d2->d_inode->i_mutex;
-+	mutex_unlock(m1);
-+	if (m1 != m2)
-+		mutex_unlock(m2);
-+	dput(d1);
-+	dput(d2);
-+}
-+
-+#else
- static inline void double_down(struct semaphore *s1, struct semaphore *s2)
- {
-         if (s1 != s2) {
-@@ -463,8 +490,8 @@ static inline void double_unlock(struct 
-         dput(d1);
-         dput(d2);
- }
--
--#endif
-+#endif   /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) */
-+#endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
- #endif /* __KERNEL__ */
- 
- /*
---- a/mmap.c
-+++ b/mmap.c
-@@ -478,7 +478,11 @@ mini_fo_commit_write(file_t *file, page_
- 	if (ftopd(file) != NULL)
- 		hidden_file = ftohf(file);
- 
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_lock(&hidden_inode->i_mutex);
-+#else
- 	down(&hidden_inode->i_sem);
-+#endif
- 	/* find lower page (returns a locked page) */
- 	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
- 	if (!hidden_page)
-@@ -556,7 +560,12 @@ mini_fo_commit_write(file_t *file, page_
- 		ClearPageUptodate(page);
- 	else
- 		SetPageUptodate(page);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_unlock(&hidden_inode->i_mutex);
-+#else
- 	up(&hidden_inode->i_sem);
-+#endif
- 	print_exit_status(err);
- 	return err;			/* assume all is ok */
- }
---- a/state.c
-+++ b/state.c
-@@ -44,7 +44,12 @@ int create_sto_reg_file(dentry_t *dentry
- 
- 	/* lock parent */
- 	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
-         down(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 
- 	err = PTR_ERR(hidden_sto_dir_dentry);
-         if (IS_ERR(hidden_sto_dir_dentry))
-@@ -97,7 +102,11 @@ int create_sto_reg_file(dentry_t *dentry
- 				 hidden_sto_dir_dentry->d_inode);
- 
-  out_lock:
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
-         dput(hidden_sto_dir_dentry);
-  out:
- 	return err;
-@@ -130,7 +139,12 @@ n");
- 
- 	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
- 	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	down(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 
- 	err = PTR_ERR(hidden_sto_dir_dentry);
- 	if (IS_ERR(hidden_sto_dir_dentry))
-@@ -184,7 +198,11 @@ n");
- 
-  out_lock:
- 	/* was: unlock_dir(hidden_sto_dir_dentry); */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 	dput(hidden_sto_dir_dentry);
-  out:
- 	return err;
-@@ -217,7 +235,12 @@ int create_sto_nod(dentry_t *dentry, int
- 	
- 	/* lock parent */
- 	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	down(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 	
- 	err = PTR_ERR(hidden_sto_dir_dentry);
- 	if (IS_ERR(hidden_sto_dir_dentry))
-@@ -260,7 +283,11 @@ int create_sto_nod(dentry_t *dentry, int
- 	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
- 
-  out_lock:
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 	dput(hidden_sto_dir_dentry);
-  out:
- 	return err;
-@@ -314,7 +341,12 @@ int nondir_unmod_to_mod(dentry_t *dentry
- 
- 	/* lock parent */
- 	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
-         down(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 
- 	err = PTR_ERR(hidden_sto_dir_dentry);
-         if (IS_ERR(hidden_sto_dir_dentry))
-@@ -365,7 +397,12 @@ int nondir_unmod_to_mod(dentry_t *dentry
- 	if((cp_flag == 1) && S_ISREG(dentry->d_inode->i_mode)) {
- 
- 		/* unlock first */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 		up(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
-+
- 		dput(hidden_sto_dir_dentry);
- 
- 		tgt_dentry = dtohd2(dentry);
-@@ -383,7 +420,11 @@ int nondir_unmod_to_mod(dentry_t *dentry
- 	}
- 
-  out_lock:
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
-         dput(hidden_sto_dir_dentry);
-  out:
- 	return err;
-@@ -420,7 +461,12 @@ int nondir_creat_to_del(dentry_t *dentry
- 	
- 	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
- 	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	down(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 	
- 	/* avoid destroying the hidden inode if the file is in use */
- 	dget(hidden_sto_dentry);
-@@ -435,7 +481,11 @@ int nondir_creat_to_del(dentry_t *dentry
- 	dtost(dentry) = NON_EXISTANT;
- 	
- 	/* was: unlock_dir(hidden_sto_dir_dentry); */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 	dput(hidden_sto_dir_dentry);
- 	
-  out:
-@@ -464,7 +514,12 @@ int nondir_mod_to_del(dentry_t *dentry)
- 	
- 	/* was hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
- 	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	down(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 	
- 	/* avoid destroying the hidden inode if the file is in use */
- 	dget(hidden_sto_dentry);
-@@ -488,7 +543,11 @@ int nondir_mod_to_del(dentry_t *dentry)
- 			 dentry->d_name.len);
- 	
- 	/* was: unlock_dir(hidden_sto_dir_dentry); */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
-+	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
-+#else
- 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
-+#endif
- 	dput(hidden_sto_dir_dentry);
- 
-  out:
-
diff --git a/openwrt/target/linux/package/openswan/Config.in b/openwrt/target/linux/package/openswan/Config.in
deleted file mode 100644
index 59a943f8e4..0000000000
--- a/openwrt/target/linux/package/openswan/Config.in
+++ /dev/null
@@ -1,10 +0,0 @@
-config BR2_PACKAGE_KMOD_OPENSWAN
-	prompt "kmod-openswan..................... Openswan kernel module"
-	tristate
-	default m if CONFIG_DEVEL
-	help
-	  Openswan is an implementation of IPsec for Linux.
-	  
-	  http://www.openswan.org/
-	  
-	  This package contains the Openswan IPSec module for the kernel
diff --git a/openwrt/target/linux/package/openswan/Makefile b/openwrt/target/linux/package/openswan/Makefile
deleted file mode 100644
index 0a8289525b..0000000000
--- a/openwrt/target/linux/package/openswan/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-# $Id$
-
-include $(TOPDIR)/rules.mk
-include ../../rules.mk
-
-PKG_NAME:=openswan
-PKG_VERSION:=2.4.5
-PKG_RELEASE:=1
-PKG_MD5SUM:=a9a8e88313faceebfc5ceb1a9da9a3c4
-
-PKG_SOURCE_URL:=http://www.openswan.org/download
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_CAT:=zcat
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_OPENSWAN,kmod-openswan,$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-FLAGS := $(TARGET_CFLAGS) -I$(PKG_BUILD_DIR)/linux/include -L$(STAGING_DIR)/usr/lib -I$(STAGING_DIR)/usr/include
-
-$(PKG_BUILD_DIR)/.built:
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		$(TARGET_CONFIGURE_OPTS) \
-		LINUX_RELEASE="$(LINUX_RELEASE)" \
-		KERNELSRC="$(LINUX_DIR)" \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		USERCOMPILE="$(FLAGS)" \
-		AS="$(TARGET_CC) -c $(TARGET_CFLAGS)" \
-		module
-
-$(IPKG_KMOD_OPENSWAN):
-	mkdir -p $(IDIR_KMOD_OPENSWAN)/lib/modules/$(LINUX_VERSION)
-	$(CP) $(PKG_BUILD_DIR)/modobj*/ipsec.$(LINUX_KMOD_SUFFIX) $(IDIR_KMOD_OPENSWAN)/lib/modules/$(LINUX_VERSION)/
-	$(IPKG_BUILD) $(IDIR_KMOD_OPENSWAN) $(PACKAGE_DIR)
diff --git a/openwrt/target/linux/package/openswan/ipkg/kmod-openswan.control b/openwrt/target/linux/package/openswan/ipkg/kmod-openswan.control
deleted file mode 100644
index f06c80cda5..0000000000
--- a/openwrt/target/linux/package/openswan/ipkg/kmod-openswan.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-openswan
-Priority: optional
-Section: net
-Description: Openswan IPSec kernel module
diff --git a/openwrt/target/linux/package/openswan/patches/101-arp_header.patch b/openwrt/target/linux/package/openswan/patches/101-arp_header.patch
deleted file mode 100644
index 7375f65a48..0000000000
--- a/openwrt/target/linux/package/openswan/patches/101-arp_header.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-diff -Nur openswan-2.4.5rc5/linux/net/ipsec/ipsec_tunnel.c openswan-2.4.5rc5.patched/linux/net/ipsec/ipsec_tunnel.c
---- openswan-2.4.5rc5/linux/net/ipsec/ipsec_tunnel.c	2005-11-22 05:11:52.000000000 +0100
-+++ openswan-2.4.5rc5.patched/linux/net/ipsec/ipsec_tunnel.c	2006-03-29 01:13:35.000000000 +0200
-@@ -33,6 +33,7 @@
- #include <linux/types.h>  /* size_t */
- #include <linux/interrupt.h> /* mark_bh */
- 
-+#include <net/arp.h>
- #include <net/tcp.h>
- #include <net/udp.h>
- #include <linux/skbuff.h>
diff --git a/openwrt/target/linux/package/shfs/Config.in b/openwrt/target/linux/package/shfs/Config.in
deleted file mode 100644
index 61bd54b5e5..0000000000
--- a/openwrt/target/linux/package/shfs/Config.in
+++ /dev/null
@@ -1,22 +0,0 @@
-config BR2_PACKAGE_KMOD_SHFS
-	prompt "kmod-shfs......................... Shell FileSystem kernel module (ShFS) kernel module"
-	tristate
-	default m if CONFIG_DEVEL
-	help
-	  ShFS is a simple and easy to use Linux kernel module which 
-	  allows you to mount remote filesystems using a plain shell 
-	  (SSH) connection. When using ShFS, you can access all remote 
-	  files just like the local ones, only the access is governed 
-	  through the transport security of SSH.
-	  
-	  ShFS supports some nice features:
-	  
-	   * file cache for access speedup
-	   * perl and shell code for the remote (server) side
-	   * could preserve uid/gid (root connection)
-	   * number of remote host platforms (Linux, Solaris, Cygwin, ...)
-	   * Linux kernel 2.4.10+ and 2.6
-	   * arbitrary command used for connection (instead of SSH)
-	   * persistent connection (reconnect after SSH dies) 
-	  
-	  http://shfs.sourceforge.net/
diff --git a/openwrt/target/linux/package/shfs/Makefile b/openwrt/target/linux/package/shfs/Makefile
deleted file mode 100644
index 4625bdb12e..0000000000
--- a/openwrt/target/linux/package/shfs/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-# $Id$
-
-include $(TOPDIR)/rules.mk
-include ../../rules.mk
-
-PKG_NAME:=shfs
-PKG_VERSION:=0.35
-PKG_RELEASE:=2
-PKG_MD5SUM:=016f49d71bc32eee2b5d11fc1600cfbe
-
-PKG_SOURCE_URL:=@SF/shfs
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_SHFS,kmod-shfs,$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-$(PKG_BUILD_DIR)/.configured:
-	touch $@
-
-$(PKG_BUILD_DIR)/.built: 
-	rm -rf $(PKG_INSTALL_DIR)
-	mkdir -p $(PKG_INSTALL_DIR)
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		PATH="$(TARGET_PATH)" \
-		OFLAGS="$(TARGET_CFLAGS)" \
-		CC="$(TARGET_CC)" \
-		LINKER="$(TARGET_CC)" \
-		KERNEL="$(LINUX_VERSION)" \
-		KERNEL_SOURCES="$(LINUX_DIR)" \
-		ROOT="$(PKG_INSTALL_DIR)" \
-		module module-install
-	touch $@
-
-$(IPKG_KMOD_SHFS):
-	install -m0755 -d $(IDIR_KMOD_SHFS)/lib/modules/$(LINUX_VERSION)
-	$(CP) $(PKG_INSTALL_DIR)/lib/modules/$(LINUX_VERSION)/kernel/fs/shfs/shfs.$(LINUX_KMOD_SUFFIX) \
-	 $(IDIR_KMOD_SHFS)/lib/modules/$(LINUX_VERSION)/
-	$(IPKG_BUILD) $(IDIR_KMOD_SHFS) $(PACKAGE_DIR)
-
diff --git a/openwrt/target/linux/package/shfs/ipkg/kmod-shfs.control b/openwrt/target/linux/package/shfs/ipkg/kmod-shfs.control
deleted file mode 100644
index 240efe60be..0000000000
--- a/openwrt/target/linux/package/shfs/ipkg/kmod-shfs.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-shfs
-Priority: optional
-Section: sys
-Description: SHell FileSystem Linux kernel module
diff --git a/openwrt/target/linux/package/shfs/patches/101-kmod_build.patch b/openwrt/target/linux/package/shfs/patches/101-kmod_build.patch
deleted file mode 100644
index 11701033f5..0000000000
--- a/openwrt/target/linux/package/shfs/patches/101-kmod_build.patch
+++ /dev/null
@@ -1,98 +0,0 @@
---- shfs-0.35-orig/shfs/Linux-2.4/Makefile	2004-06-01 15:16:19.000000000 +0200
-+++ shfs-0.35-2/shfs/Linux-2.4/Makefile	2005-04-09 02:34:35.000000000 +0200
-@@ -1,3 +1,13 @@
-+#
-+# the original Makefile was trashed and replaced by this one
-+# The main reason is that loadable modules should be built with
-+# the same compile flags the kernel was built with, so we'd better
-+# let the kernel tree build the module for us, like that :
-+#
-+#   make -C $(KERNEL_DIR) SUBDIRS="$(shell pwd)" modules
-+#   make -C $(KERNEL_DIR) SUBDIRS="$(shell pwd)" modules_install
-+#
-+
- ifndef KERNEL
- KERNEL=$(shell uname -r)
- endif
-@@ -10,67 +24,29 @@
- KERNEL_SOURCES=${MODULESDIR}/build
- endif
- 
--ifeq (${MODVERSIONS},detect)
--  ifeq ($(shell test -e ${KERNEL_SOURCES}/include/linux/modversions.h; echo $$?),0)
--    MODVERSIONS=yes
--  endif
--endif
--
--ifeq (${MODVERSIONS},yes)
--MVER=-DMODVERSIONS -DEXPORT_SYMTAB
--endif
--
--LINVER=linux-${KERNEL}
--
--ALL_TARGETS := shfs.o
--
--SEARCHDIRS := -I- -I. -I${KERNEL_SOURCES}/include #-I/usr/src/linux/include/
-+all: all-y
- 
--CC     := gcc
--CFLAGS  = -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -Wall ${SEARCHDIRS} -DMODULE ${MVER} -D__KERNEL__ -DLINUX
--LINKER    := ld
--LDFLAGS    = -r
--LOADLIBES := 
-+O_TARGET := shfs.o
- 
--all: ${ALL_TARGETS}
-+shfs-objs := dcache.o dir.o fcache.o file.o inode.o ioctl.o proc.o shell.o symlink.o
- 
--%.o: %.c $(wildcard *.h)
--	${CC} ${CFLAGS} -c $< -o $@
-+obj-y := $(shfs-objs) 
-+obj-m := $(O_TARGET)
- 
--shfs.o: dcache.o dir.o fcache.o file.o inode.o ioctl.o proc.o shell.o symlink.o
--	${LINKER} ${LDFLAGS} -o $@ ${filter-out %.a %.so, $^} ${LOADLIBES}
--
--tidy:
--	${RM} core dcache.o dir.o fcache.o file.o inode.o ioctl.o proc.o shell.o symlink.o
--
--clean: tidy patch-clean
--	${RM} shfs.o
-+-include $(TOPDIR)/Rules.make
- 
-+all-y:
-+	make -C ${KERNEL_SOURCES} TOPDIR="${KERNEL_SOURCES}" SUBDIRS="$(shell pwd)" modules
-+	
- install: shfs.o
- 	rm -f ${MODULESDIR}/kernel/fs/shfs/shfs.o
- 	install -m644 -b -D shfs.o ${MODULESDIR}/kernel/fs/shfs/shfs.o
--	if [ -x /sbin/depmod -a "${ROOT}" = "/" ]; then /sbin/depmod -aq; fi
- 
- uninstall:
- 	rm -rf ${MODULESDIR}/kernel/fs/shfs
--	if [ -x /sbin/depmod -a "${ROOT}" = "/" ]; then /sbin/depmod -aq; fi
- 
--patch:
--	rm -rf ${LINVER} ${LINVER}.orig; mkdir ${LINVER};
--	for i in Documentation fs/shfs include/linux; do \
--	  mkdir -p ${LINVER}/$$i; \
--	done
--	cp ${KERNEL_SOURCES}/Documentation/Configure.help ${LINVER}/Documentation
--	cp ${KERNEL_SOURCES}/fs/{Makefile,Config.in} ${LINVER}/fs
--	cp -r ${LINVER} ${LINVER}.orig
--	cp ../../Changelog *.c shfs_debug.h proc.h ${LINVER}/fs/shfs/
--	cp shfs.h shfs_fs* ${LINVER}/include/linux/
--	(cd ${LINVER}; patch -p1 <../kernel-config.diff)
--	find . -type f -name "*.orig" -print | xargs rm -f
--	diff -urN ${LINVER}.orig ${LINVER} >${LINVER}.diff; true
--
--patch-clean:
--	rm -rf ${LINVER} ${LINVER}.orig;
--	rm -f ${LINVER}.diff
--	
--.PHONY : all tidy clean install uninstall patch patch-clean
-+clean:
-+	rm -f core *.o *.a *.s
-+
-+shfs.o: $(shfs-objs)
-+
diff --git a/openwrt/target/linux/package/shfs/patches/102-gcc4_fix.patch b/openwrt/target/linux/package/shfs/patches/102-gcc4_fix.patch
deleted file mode 100644
index c4fd36629b..0000000000
--- a/openwrt/target/linux/package/shfs/patches/102-gcc4_fix.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-diff -ur shfs-0.35/shfs/Linux-2.6/dir.c shfs-0.35-new/shfs/Linux-2.6/dir.c
---- shfs-0.35/shfs/Linux-2.6/dir.c	2004-06-01 09:16:19.000000000 -0400
-+++ shfs-0.35-new/shfs/Linux-2.6/dir.c	2005-02-11 18:12:00.000000000 -0500
-@@ -19,6 +19,8 @@
- #include "shfs_debug.h"
- #include "proc.h"
- 
-+static struct dentry_operations shfs_dentry_operations;
-+	
- static int
- shfs_dir_open(struct inode *inode, struct file *filp)
- {
-diff -ur shfs-0.35/shfs/Linux-2.6/shfs_fs.h shfs-0.35-new/shfs/Linux-2.6/shfs_fs.h
---- shfs-0.35/shfs/Linux-2.6/shfs_fs.h	2004-06-01 09:16:19.000000000 -0400
-+++ shfs-0.35-new/shfs/Linux-2.6/shfs_fs.h	2005-02-11 18:12:03.000000000 -0500
-@@ -50,7 +50,6 @@
- #define ROUND_TO_MINS(x) do { (x).tv_sec = ((x).tv_sec / 60) * 60; (x).tv_nsec = 0; } while (0)
- 
- /* shfs/dir.c */
--extern struct dentry_operations shfs_dentry_operations;
- extern struct file_operations shfs_dir_operations;
- extern struct inode_operations shfs_dir_inode_operations;
- extern void shfs_new_dentry(struct dentry *dentry);
diff --git a/openwrt/target/linux/package/shfs/patches/103-dentry.patch b/openwrt/target/linux/package/shfs/patches/103-dentry.patch
deleted file mode 100644
index 83a406a268..0000000000
--- a/openwrt/target/linux/package/shfs/patches/103-dentry.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-diff -urN shfs-0.35.orig/shfs/Linux-2.6/dcache.c shfs-0.35/shfs/Linux-2.6/dcache.c
---- shfs-0.35.orig/shfs/Linux-2.6/dcache.c	2004-06-01 09:16:19.000000000 -0400
-+++ shfs-0.35/shfs/Linux-2.6/dcache.c	2006-03-25 07:08:57.950752296 -0500
-@@ -68,7 +68,7 @@
- 	spin_lock(&dcache_lock);
- 	next = parent->d_subdirs.next;
- 	while (next != &parent->d_subdirs) {
--		dentry = list_entry(next, struct dentry, d_child);
-+		dentry = list_entry(next, struct dentry, d_u.d_child);
- 		dentry->d_fsdata = NULL;
- 		shfs_age_dentry(info, dentry);
- 		next = next->next;
-@@ -101,7 +101,7 @@
- 	spin_lock(&dcache_lock);
- 	next = parent->d_subdirs.next;
- 	while (next != &parent->d_subdirs) {
--		dent = list_entry(next, struct dentry, d_child);
-+		dent = list_entry(next, struct dentry, d_u.d_child);
- 		if ((unsigned long)dent->d_fsdata == fpos) {
- 			if (dent->d_inode)
- 				dget_locked(dent);
diff --git a/openwrt/target/linux/package/spca5xx/Config.in b/openwrt/target/linux/package/spca5xx/Config.in
deleted file mode 100644
index 6d504823f1..0000000000
--- a/openwrt/target/linux/package/spca5xx/Config.in
+++ /dev/null
@@ -1,9 +0,0 @@
-config BR2_PACKAGE_KMOD_SPCA5XX
-	prompt "kmod-spca5xx...................... Kernel driver for SPCA5XX based USB cameras"
-	tristate
-	default m if CONFIG_DEVEL
-	help
-	  Kernel driver for SPCA5XX based USB cameras
-	  
-	  http://mxhaard.free.fr/
-	  
diff --git a/openwrt/target/linux/package/spca5xx/Makefile b/openwrt/target/linux/package/spca5xx/Makefile
deleted file mode 100644
index fa2605df25..0000000000
--- a/openwrt/target/linux/package/spca5xx/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-# $Id$
-
-include $(TOPDIR)/rules.mk
-include ../../rules.mk
-
-PKG_NAME:=spca5xx
-PKG_VERSION:=20060301
-PKG_RELEASE:=1
-PKG_MD5SUM:=4160e03c408ac254111febacf058b88a
-
-PKG_SOURCE_URL:=http://mxhaard.free.fr/spca50x/Download/
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_SPCA5XX,kmod-spca5xx,$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-$(PKG_BUILD_DIR)/.configured:
-	touch $@
-
-$(PKG_BUILD_DIR)/.built: 
-	$(MAKE) -C $(LINUX_DIR) \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		KERNELVERSION="$(KERNEL)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		modules
-	touch $@
-
-$(IPKG_KMOD_SPCA5XX):
-	install -m0755 -d $(IDIR_KMOD_SPCA5XX)/lib/modules/$(LINUX_VERSION)
-	$(CP) $(PKG_BUILD_DIR)/spca5xx.$(LINUX_KMOD_SUFFIX) \
-		$(IDIR_KMOD_SPCA5XX)/lib/modules/$(LINUX_VERSION)/
-	$(RSTRIP_KMOD) $(IDIR_KMOD_SPCA5XX)
-	$(IPKG_BUILD) $(IDIR_KMOD_SPCA5XX) $(PACKAGE_DIR)
-
diff --git a/openwrt/target/linux/package/spca5xx/ipkg/kmod-spca5xx.control b/openwrt/target/linux/package/spca5xx/ipkg/kmod-spca5xx.control
deleted file mode 100644
index 1563eb4566..0000000000
--- a/openwrt/target/linux/package/spca5xx/ipkg/kmod-spca5xx.control
+++ /dev/null
@@ -1,5 +0,0 @@
-Package: kmod-spca5xx
-Priority: optional
-Section: sys
-Depends: kmod-videodev, kmod-usb-core
-Description: Kernel driver for SPCA5XX based USB cameras
diff --git a/openwrt/target/linux/package/spca5xx/patches/01-kmod-build.patch b/openwrt/target/linux/package/spca5xx/patches/01-kmod-build.patch
deleted file mode 100644
index 304df92047..0000000000
--- a/openwrt/target/linux/package/spca5xx/patches/01-kmod-build.patch
+++ /dev/null
@@ -1,177 +0,0 @@
-diff -Nur spca5xx-20051212/Makefile spca5xx-20051212.patched/Makefile
---- spca5xx-20051212/Makefile	2005-12-10 17:05:51.000000000 +0100
-+++ spca5xx-20051212.patched/Makefile	2005-12-25 02:41:29.910720750 +0100
-@@ -33,7 +33,9 @@
- DEFINES   += -DCONFIG_USB_SPCA5XX_MODULE=1 -DMODULE -D__KERNEL__
- DEFINES   += -DVID_HARDWARE_SPCA5XX=0xFF -DSPCA5XX_VERSION=\"$(VERSION)\"
- 
--ifneq ($(shell uname -r | cut -d. -f1,2), 2.4)
-+KERNELVERSION=$(shell uname -r | cut -d. -f1,2)
-+
-+ifneq ($(KERNELVERSION), 2.4)
- 
- ifneq ($(KERNELRELEASE),)   # We were called by kbuild
- CFLAGS += $(DEFINES) 
-@@ -68,152 +70,16 @@
- 
- else   # kernel version test
- 
--#############################################################################
--# For Linux 2.4 users.
--# Change the following lines according to your system configuration.
--# It is important to configure your particular source tree ("make dep") before
--# compiling this module!
--#############################################################################
--###
--# This makefile will build the spca50x driver module external to the kernel
--# source tree. It makes it easier to swap kernels.
--
--
--KERNEL_VERSION = `uname -r`
--
--###
--# Location of the header files (most importantly the config files)
--# for the kernel you want to build the module against.
--# This should be correct for the currently installed kernel on your machine.
--KINCLUDE   = /lib/modules/$(KERNEL_VERSION)/build/include
--KERNEL_ACFILE = $(KINCLUDE)/linux/autoconf.h
--KERNEL_MODVERSIONSFILE = $(KINCLUDE)/linux/modversions.h
--MODULE_INSTALLDIR = /lib/modules/$(KERNEL_VERSION)/kernel/drivers/usb/
--
--# Detect module versioning support
--ifneq ($(strip $(shell grep 'define CONFIG_MODVERSIONS 1' $(KERNEL_ACFILE))),)
--	DEFINES += -DMODVERSIONS -include $(KERNEL_MODVERSIONSFILE)
--endif
--
--# Detect SMP support
--ifneq ($(strip $(shell grep 'define CONFIG_SMP 1' $(KERNEL_ACFILE))),)
--	DEFINES += -D__SMP__ -DSMP
--endif
--
--# Setup the tools
--CC         = gcc
--LD         = ld
--
--# Setup compiler warnings
--WARNINGS   = -Wall -Wpointer-arith
--WARNINGS  += -Wcast-align -Wwrite-strings -Wstrict-prototypes
--WARNINGS  += -Wuninitialized -Wreturn-type -Wunused -Wparentheses
--
--# Setup compiler flags
--CFLAGS     = -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe
--CFLAGS    += -mpreferred-stack-boundary=2 
--CFLAGS    += -I$(KINCLUDE) -Idrivers/usb
--
--# Setup link flags
--LDFLAGS    = --strip-debug -r
--
--# Setup the list of files to be included in a distribution
--DIST_FILES = CHANGELOG \
--             README \
--             Makefile \
--             drivers/usb/Config.in \
--             drivers/usb/spcadecoder.c \
--             drivers/usb/spcadecoder.h \
--	     drivers/usb/spcagamma.h \
--	     drivers/usb/spcaCompat.h \
--	     drivers/usb/spcausb.h \
--             drivers/usb/spca500_init.h \
--             drivers/usb/spca501_init.h \
--	     drivers/usb/sp5xxfw2.dat \
--             drivers/usb/sp5xxfw2.h \
--             drivers/usb/spca505_init.h \
--             drivers/usb/spca506.h \
--             drivers/usb/spca508_init.h \
--	     drivers/usb/spca561.h \
--	     drivers/usb/sonix.h \
--             drivers/usb/cs2102.h \
--             drivers/usb/hv7131b.h \
--	     drivers/usb/icm105a.h \
--             drivers/usb/hv7131c.h \
--	     drivers/usb/hdcs2020.h \
--             drivers/usb/pb0330.h \
--	     drivers/usb/tas5130c.h \
--	     drivers/usb/zc3xx.h\
--	     drivers/usb/tv8532.h\
--	     drivers/usb/cxlib.h\
--	     drivers/usb/sn9cxxx.h\
--	     drivers/usb/cx11646.h\
--	     drivers/usb/pac207.h\
--	     drivers/usb/spca5xx.c \
--             drivers/usb/spca5xx.h 
--
--OBJS       = drivers/usb/spcadecoder.o \
--             drivers/usb/spca5xx.o
--
--BINARY     = spca5xx.o
--
--###
--# Targets follow here
--
--binary:	$(OBJS)
--	@echo Linking $(BINARY)
--	@$(LD) $(LDFLAGS) -o $(BINARY) $(OBJS)
--
--install: binary
--	@echo Installing.. Your root password may be required.
--	su -c "make install-root"
--
--install-root:
--	@echo Installing..
--	@mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb
--	@rm -f /lib/modules/`uname -r`/kernel/drivers/usb/spca50x.o
--	@rm -f /lib/modules/`uname -r`/kernel/drivers/usb/et61x.o
--	@cp spca5xx.o /lib/modules/`uname -r`/kernel/drivers/usb/spca5xx.o
--	@/sbin/depmod
--
--dist:	clean binary
--	@echo Making distributable archives
--	@rm -f spca5xx-src-$(VERSION).tar.gz
--	@tar zcf spca5xx-src-$(VERSION).tar.gz $(DIST_FILES)
--	@rm -f spca5xx-module-$(VERSION).tar.gz
--	@cp $(BINARY) spca5xx-$(VERSION).o
--	@tar zcf spca5xx-module-$(VERSION).tar.gz spca5xx-$(VERSION).o README
--	@rm spca5xx-$(VERSION).o
--
--.c.o:	Makefile $*.c
--	@echo Compiling $*.c
--	@$(CC) $(CFLAGS) $(WARNINGS) $(DEFINES) -c $*.c -o $*.o
--
--###
--# Dependencies follow here
--
--drivers/usb/spca5xx.o: drivers/usb/spca5xx.h \
--		       drivers/usb/spcaCompat.h \
--		       drivers/usb/spcausb.h \
--		       drivers/usb/sonix.h \
--                       drivers/usb/spca500_init.h \
--                       drivers/usb/spca501_init.h \
--		       drivers/usb/sp5xxfw2.h \
--                       drivers/usb/spca505_init.h \
--		       drivers/usb/spca506.h \
--                       drivers/usb/spca508_init.h \
--		       drivers/usb/spca561.h \
--		       drivers/usb/zc3xx.h\
--		       drivers/usb/tv8532.h\
--		       drivers/usb/cx11646.h\
--		       drivers/usb/mr97311.h\
--		       drivers/usb/sn9cxxx.h\
--		       drivers/usb/pac207.h\
--                       
--
--drivers/usb/spcadecoder.o: drivers/usb/spcadecoder.h \
--			   drivers/usb/spcagamma.h \
--                          
-+EXTRA_CFLAGS += $(DEFINES) 
-+  
-+spca5xx-objs := drivers/usb/spca5xx.o drivers/usb/spcadecoder.o 
-+  
-+obj-m += spca5xx.o
-+obj-y := $(spca5xx-objs)
-+  
-+O_TARGET := $(obj-m)
-+  
-+-include $(TOPDIR)/Rules.make
- 
- endif  # End kernel version test
- 
diff --git a/openwrt/target/linux/package/switch/Config.in b/openwrt/target/linux/package/switch/Config.in
deleted file mode 100644
index 407d5deb68..0000000000
--- a/openwrt/target/linux/package/switch/Config.in
+++ /dev/null
@@ -1,11 +0,0 @@
-config BR2_PACKAGE_KMOD_SWITCH
-	prompt "kmod-switch....................... Kernel driver for ROBO and ADMTEK SWITCH"
-	tristate
-	default y if BR2_LINUX_2_6_BRCM || BR2_LINUX_2_4_BRCM
-	default m if CONFIG_DEVEL
-	default n
-	help
-	  Kernel driver for ROBO and ADMTEK switches.
-	  
-	  http://www.openwrt.org
-	  
diff --git a/openwrt/target/linux/package/switch/Makefile b/openwrt/target/linux/package/switch/Makefile
deleted file mode 100644
index 812fccb2cc..0000000000
--- a/openwrt/target/linux/package/switch/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-# $Id$
-
-include $(TOPDIR)/rules.mk
-include ../../rules.mk
-
-PKG_NAME := kmod-switch
-PKG_RELEASE := 1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_SWITCH,$(PKG_NAME),$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-$(PKG_BUILD_DIR)/.prepared:
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-	touch $@
-
-$(PKG_BUILD_DIR)/.configured:
-	touch $@
-
-$(PKG_BUILD_DIR)/.built:
-	$(MAKE) -C "$(LINUX_DIR)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCH="$(LINUX_KARCH)" \
-		PATH="$(TARGET_PATH)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		EXTRA_CFLAGS="-DBCMGPIO2" \
-		modules
-	touch $@
-	
-$(IPKG_KMOD_SWITCH):
-	install -m0755 -d $(IDIR_KMOD_SWITCH)/lib/modules/$(LINUX_VERSION)
-	$(CP) $(PKG_BUILD_DIR)/*.$(LINUX_KMOD_SUFFIX) \
-		$(IDIR_KMOD_SWITCH)/lib/modules/$(LINUX_VERSION)
-	$(IPKG_BUILD) $(IDIR_KMOD_SWITCH) $(PACKAGE_DIR)
-
diff --git a/openwrt/target/linux/package/switch/ipkg/kmod-switch.control b/openwrt/target/linux/package/switch/ipkg/kmod-switch.control
deleted file mode 100644
index db8a368430..0000000000
--- a/openwrt/target/linux/package/switch/ipkg/kmod-switch.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-switch
-Priority: optional
-Section: sys
-Description: switch driver for robo/admtek switch
diff --git a/openwrt/target/linux/package/switch/src/Makefile b/openwrt/target/linux/package/switch/src/Makefile
deleted file mode 100644
index 4c5f911ea2..0000000000
--- a/openwrt/target/linux/package/switch/src/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-# $Id$
-#
-# Makefile for switch driver
-#
-# Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version
-# 2 of the License, or (at your option) any later version.
-#
-
-obj-m	:= switch-core.o switch-adm.o switch-robo.o
-
-ifeq ($(MAKING_MODULES),1)
-export-objs := switch-core.o
-
--include $(TOPDIR)/Rules.make
-endif
diff --git a/openwrt/target/linux/package/switch/src/etc53xx.h b/openwrt/target/linux/package/switch/src/etc53xx.h
deleted file mode 100644
index 12d94a5d03..0000000000
--- a/openwrt/target/linux/package/switch/src/etc53xx.h
+++ /dev/null
@@ -1,620 +0,0 @@
-/*
- * Broadcom Home Gateway Reference Design
- * BCM53xx Register definitions
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- * $Id: etc53xx.h,v 1.1 2005/05/14 13:15:46 nbd Exp $
- */
-
-#ifndef __BCM535M_H_
-#define __BCM535M_H_
-
-/* ROBO embedded device type */
-#define ROBO_DEV_5380 1
-#define ROBO_DEV_5365 2
-#define ROBO_DEV_5350 3
-
-/* BCM5325m GLOBAL PAGE REGISTER MAP */
-#ifndef _CFE_
-#pragma pack(1)
-#endif
-
-/* BCM5325m Serial Management Port (SMP) Page offsets */
-#define ROBO_CTRL_PAGE        0x00  /* Control registers */
-#define ROBO_STAT_PAGE        0x01  /* Status register */
-#define ROBO_MGMT_PAGE        0x02  /* Management Mode registers */
-#define ROBO_MIB_AC_PAGE      0x03  /* MIB Autocast registers */
-#define ROBO_ARLCTRL_PAGE     0x04  /* ARL Control Registers */
-#define ROBO_ARLIO_PAGE       0x05  /* ARL Access Registers */
-#define ROBO_FRAMEBUF_PAGE    0x06  /* Management frame access registers */
-#define ROBO_MEM_ACCESS_PAGE  0x08  /* Memory access registers */
-
-/* PHY Registers */
-#define ROBO_PORT0_MII_PAGE    0x10 /* Port 0 MII Registers */
-#define ROBO_PORT1_MII_PAGE    0x11 /* Port 1 MII Registers */
-#define ROBO_PORT2_MII_PAGE    0x12 /* Port 2 MII Registers */
-#define ROBO_PORT3_MII_PAGE    0x13 /* Port 3 MII Registers */
-#define ROBO_PORT4_MII_PAGE    0x14 /* Port 4 MII Registers */
-/* (start) registers only for BCM5380 */
-#define ROBO_PORT5_MII_PAGE    0x15 /* Port 5 MII Registers */
-#define ROBO_PORT6_MII_PAGE    0x16 /* Port 6 MII Registers */
-#define ROBO_PORT7_MII_PAGE    0x17 /* Port 7 MII Registers */
-/* (end) registers only for BCM5380 */
-#define ROBO_IM_PORT_PAGE      0x18 /* Inverse MII Port (to EMAC) */
-#define ROBO_ALL_PORT_PAGE     0x19 /* All ports MII Registers (broadcast)*/
-
-/* MAC Statistics registers */
-#define ROBO_PORT0_MIB_PAGE       0x20 /* Port 0 10/100 MIB Statistics */
-#define ROBO_PORT1_MIB_PAGE       0x21 /* Port 1 10/100 MIB Statistics */
-#define ROBO_PORT2_MIB_PAGE       0x22 /* Port 2 10/100 MIB Statistics */
-#define ROBO_PORT3_MIB_PAGE       0x23 /* Port 3 10/100 MIB Statistics */
-#define ROBO_PORT4_MIB_PAGE       0x24 /* Port 4 10/100 MIB Statistics */
-/* (start) registers only for BCM5380 */
-#define ROBO_PORT5_MIB_PAGE       0x25 /* Port 5 10/100 MIB Statistics */
-#define ROBO_PORT6_MIB_PAGE       0x26 /* Port 6 10/100 MIB Statistics */
-#define ROBO_PORT7_MIB_PAGE       0x27 /* Port 7 10/100 MIB Statistics */
-/* (end) registers only for BCM5380 */
-#define ROBO_IM_PORT_MIB_PAGE     0x28 /* Inverse MII Port MIB Statistics */
-
-/* Quality of Service (QoS) Registers */
-#define ROBO_QOS_PAGE             0x30 /* QoS Registers */
-
-/* VLAN Registers */
-#define ROBO_VLAN_PAGE            0x34 /* VLAN Registers */
-
-/* Note SPI Data/IO Registers not used */
-#define ROBO_SPI_DATA_IO_0_PAGE   0xf0 /* SPI Data I/O 0 */
-#define ROBO_SPI_DATA_IO_1_PAGE   0xf1 /* SPI Data I/O 1 */
-#define ROBO_SPI_DATA_IO_2_PAGE   0xf2 /* SPI Data I/O 2 */
-#define ROBO_SPI_DATA_IO_3_PAGE   0xf3 /* SPI Data I/O 3 */
-#define ROBO_SPI_DATA_IO_4_PAGE   0xf4 /* SPI Data I/O 4 */
-#define ROBO_SPI_DATA_IO_5_PAGE   0xf5 /* SPI Data I/O 5 */
-#define ROBO_SPI_DATA_IO_6_PAGE   0xf6 /* SPI Data I/O 6 */
-#define ROBO_SPI_DATA_IO_7_PAGE   0xf7 /* SPI Data I/O 7 */
-
-#define ROBO_SPI_STATUS_PAGE      0xfe /* SPI Status Registers */
-#define ROBO_PAGE_PAGE            0xff /* Page Registers */
-
-
-/* BCM5325m CONTROL PAGE (0x00) REGISTER MAP : 8bit (byte) registers */
-typedef struct _ROBO_PORT_CTRL_STRUC
-{
-    unsigned char   rx_disable:1;   /* rx disable */
-    unsigned char   tx_disable:1;   /* tx disable */
-    unsigned char   rsvd:3;         /* reserved */
-    unsigned char   stp_state:3;    /* spanning tree state */
-} ROBO_PORT_CTRL_STRUC;
-
-#define ROBO_PORT0_CTRL           0x00 /* 10/100 Port 0 Control */
-#define ROBO_PORT1_CTRL           0x01 /* 10/100 Port 1 Control */
-#define ROBO_PORT2_CTRL           0x02 /* 10/100 Port 2 Control */
-#define ROBO_PORT3_CTRL           0x03 /* 10/100 Port 3 Control */
-#define ROBO_PORT4_CTRL           0x04 /* 10/100 Port 4 Control */
-/* (start) registers only for BCM5380 */
-#define ROBO_PORT5_CTRL           0x05 /* 10/100 Port 5 Control */
-#define ROBO_PORT6_CTRL           0x06 /* 10/100 Port 6 Control */
-#define ROBO_PORT7_CTRL           0x07 /* 10/100 Port 7 Control */
-/* (end) registers only for BCM5380 */
-#define ROBO_IM_PORT_CTRL         0x08 /* 10/100 Port 8 Control */
-#define ROBO_SMP_CTRL             0x0a /* SMP Control register */
-#define ROBO_SWITCH_MODE          0x0b /* Switch Mode Control */
-#define ROBO_PORT_OVERRIDE_CTRL   0x0e /* Port state override */
-#define ROBO_PORT_OVERRIDE_RVMII  (1<<4) /* Bit 4 enables RvMII */
-#define ROBO_PD_MODE_CTRL         0x0f /* Power-down mode control */
-#define ROBO_IP_MULTICAST_CTRL    0x21 /* IP Multicast control */
-
-/* BCM5325m STATUS PAGE (0x01) REGISTER MAP : 16bit/48bit registers */
-#define ROBO_HALF_DUPLEX 0
-#define ROBO_FULL_DUPLEX 1
-
-#define ROBO_LINK_STAT_SUMMARY    0x00 /* Link Status Summary: 16bit */
-#define ROBO_LINK_STAT_CHANGE     0x02 /* Link Status Change: 16bit */
-#define ROBO_SPEED_STAT_SUMMARY   0x04 /* Port Speed Summary: 16bit*/
-#define ROBO_DUPLEX_STAT_SUMMARY  0x06 /* Duplex Status Summary: 16bit */
-#define ROBO_PAUSE_STAT_SUMMARY   0x08 /* PAUSE Status Summary: 16bit */
-#define ROBO_SOURCE_ADDR_CHANGE   0x0C /* Source Address Change: 16bit	*/
-#define ROBO_LSA_PORT0            0x10 /* Last Source Addr, Port 0: 48bits*/
-#define ROBO_LSA_PORT1            0x16 /* Last Source Addr, Port 1: 48bits*/
-#define ROBO_LSA_PORT2            0x1c /* Last Source Addr, Port 2: 48bits*/
-#define ROBO_LSA_PORT3            0x22 /* Last Source Addr, Port 3: 48bits*/
-#define ROBO_LSA_PORT4            0x28 /* Last Source Addr, Port 4: 48bits*/
-#define ROBO_LSA_IM_PORT          0x40 /* Last Source Addr, IM Port: 48bits*/
-
-/* BCM5325m MANAGEMENT MODE REGISTERS (0x02) REGISTER MAP: 8/48 bit regs*/
-typedef struct _ROBO_GLOBAL_CONFIG_STRUC
-{
-    unsigned char   resetMIB:1;         /* reset MIB counters */
-    unsigned char   rxBPDU:1;           /* receive BDPU enable */
-    unsigned char   rsvd1:2;            /* reserved */
-    unsigned char   MIBacHdrCtrl:1;     /* MIB autocast header control */
-    unsigned char   MIBac:1;            /* MIB autocast enable */
-    unsigned char   frameMgmtPort:2;    /* frame management port */
-} ROBO_GLOBAL_CONFIG_STRUC;
-#define ROBO_GLOBAL_CONFIG        0x00 /* Global Management Config: 8bit*/
-#define ROBO_MGMT_PORT_ID         0x02 /* Management Port ID: 8bit*/
-#define ROBO_RMON_MIB_STEER       0x04 /* RMON Mib Steering: 16bit */
-#define ROBO_MIB_MODE_SELECT      0x04 /* MIB Mode select: 16bit (BCM5350) */
-#define ROBO_AGE_TIMER_CTRL       0x06 /* Age time control: 32bit */
-#define ROBO_MIRROR_CAP_CTRL      0x10 /* Mirror Capture : 16bit */
-#define ROBO_MIRROR_ING_CTRL      0x12 /* Mirror Ingress Control: 16bit */
-#define ROBO_MIRROR_ING_DIV_CTRL  0x14 /* Mirror Ingress Divider: 16bit */
-#define ROBO_MIRROR_ING_MAC_ADDR  0x16 /* Ingress Mirror MAC Addr: 48bit*/
-#define ROBO_MIRROR_EGR_CTRL      0x1c /* Mirror Egress Control: 16bit */
-#define ROBO_MIRROR_EGR_DIV_CTRL  0x1e /* Mirror Egress Divider: 16bit */
-#define ROBO_MIRROR_EGR_MAC_ADDR  0x20 /* Egress Mirror MAC Addr: 48bit*/
-
-/* BCM5325m MIB AUTOCAST REGISTERS (0x03) REGISTER MAP: 8/16/48 bit regs */
-#define ROBO_MIB_AC_PORT          0x00 /* MIB Autocast Port: 16bit */
-#define ROBO_MIB_AC_HDR_PTR       0x02 /* MIB Autocast Header pointer:16bit*/ 
-#define ROBO_MIB_AC_HDR_LEN       0x04 /* MIB Autocast Header Len: 16bit */
-#define ROBO_MIB_AC_DA            0x06 /* MIB Autocast DA: 48bit */
-#define ROBO_MIB_AC_SA            0x0c /* MIB Autocast SA: 48bit */
-#define ROBO_MIB_AC_TYPE          0x12 /* MIB Autocast Type: 16bit */
-#define ROBO_MIB_AC_RATE          0x14 /* MIB Autocast Rate: 8bit */
-#define ROBO_GET_AC_RATE(secs) ((secs)*10)
-#define ROBO_AC_RATE_MAX          0xff
-#define ROBO_AC_RATE_DEFAULT      0x64  /* 10 secs */
-typedef struct _ROBO_MIB_AC_STRUCT
-{
-    unsigned char   opcode:4;       /* Tx MIB Autocast opcode */
-    unsigned char   portno:4;       /* zero-based port no. */
-    unsigned char   portstate:8;    /* port state */
-    unsigned long long TxOctets;   
-    unsigned int    TxDropPkts;
-    unsigned int    rsvd;
-    unsigned int    TxBroadcastPkts;
-    unsigned int    TxMulticastPkts;
-    unsigned int    TxUnicastPkts;
-    unsigned int    TxCollisions;
-    unsigned int    TxSingleCollision;
-    unsigned int    TxMultiCollision;
-    unsigned int    TxDeferredTransmit;
-    unsigned int    TxLateCollision;
-    unsigned int    TxExcessiveCollision;
-    unsigned int    TxFrameInDiscards;
-    unsigned int    TxPausePkts;
-    unsigned int    rsvd1[2];
-    unsigned long long RxOctets;
-    unsigned int    RxUndersizePkts;
-    unsigned int    RxPausePkts;
-    unsigned int    RxPkts64Octets;
-    unsigned int    RxPkts64to127Octets;
-    unsigned int    RxPkts128to255Octets;
-    unsigned int    RxPkts256to511Octets;
-    unsigned int    RxPkts512to1023Octets;
-    unsigned int    RxPkts1024to1522Octets;
-    unsigned int    RxOversizePkts;
-    unsigned int    RxJabbers;
-    unsigned int    RxAlignmentErrors;
-    unsigned int    RxFCSErrors;
-    unsigned long long RxGoodOctets;
-    unsigned int    RxDropPkts;
-    unsigned int    RxUnicastPkts;
-    unsigned int    RxMulticastPkts;
-    unsigned int    RxBroadcastPkts;
-    unsigned int    RxSAChanges;
-    unsigned int    RxFragments;
-    unsigned int    RxExcessSizeDisc;
-    unsigned int    RxSymbolError;
-} ROBO_MIB_AC_STRUCT;
-
-/* BCM5325m ARL CONTROL REGISTERS (0x04) REGISTER MAP: 8/16/48/64 bit regs */
-#define ROBO_ARL_CONFIG           0x00 /* ARL Global Configuration: 8bit*/
-#define ROBO_BPDU_MC_ADDR_REG     0x04 /* BPDU Multicast Address Reg:64bit*/
-#define ROBO_MULTIPORT_ADDR_1     0x10 /* Multiport Address 1: 48 bits*/
-#define ROBO_MULTIPORT_VECTOR_1   0x16 /* Multiport Vector 1: 16 bits */
-#define ROBO_MULTIPORT_ADDR_2     0x20 /* Multiport Address 2: 48 bits*/
-#define ROBO_MULTIPORT_VECTOR_2   0x26 /* Multiport Vector 2: 16 bits */
-#define ROBO_SECURE_SRC_PORT_MASK 0x30 /* Secure Source Port Mask: 16 bits*/
-#define ROBO_SECURE_DST_PORT_MASK 0x32 /* Secure Dest Port Mask: 16 bits */
-
-
-/* BCM5325m ARL IO REGISTERS (0x05) REGISTER MAP: 8/16/48/64 bit regs */
-#define ARL_TABLE_WRITE 0              /* for read/write state in control reg */
-#define ARL_TABLE_READ  1              /* for read/write state in control reg */
-#ifdef BCM5380
-#define ARL_VID_BYTES   2              /* number of bytes for VID */
-#else
-#define ARL_VID_BYTES   1              /* number of bytes for VID */
-#endif
-typedef struct _ROBO_ARL_RW_CTRL_STRUC
-{
-    unsigned char   ARLrw:1;    /* ARL read/write (1=read) */
-    unsigned char   rsvd:6;     /* reserved */
-    unsigned char   ARLStart:1; /* ARL start/done (1=start) */
-} ROBO_ARL_RW_CTRL_STRUC;
-typedef struct _ROBO_ARL_SEARCH_CTRL_STRUC
-{
-    unsigned char   valid:1;    /* ARL search result valid */
-    unsigned char   rsvd:6;     /* reserved */
-    unsigned char   ARLStart:1; /* ARL start/done (1=start) */
-} ROBO_ARL_SEARCH_CTRL_STRUC;
-typedef struct _ROBO_ARL_ENTRY_CTRL_STRUC
-{
-    unsigned char   portID:4;   /* port id */
-    unsigned char   chipID:2;   /* chip id */
-    unsigned char   rsvd:5;     /* reserved */
-    unsigned char   prio:2;     /* priority */
-    unsigned char   age:1;      /* age */
-    unsigned char   staticEn:1; /* static */
-    unsigned char   valid:1;    /* valid */
-} ROBO_ARL_ENTRY_CTRL_STRUC;
-typedef struct _ROBO_ARL_SEARCH_RESULT_CTRL_STRUC
-{
-    unsigned char   portID:4;   /* port id */
-    unsigned char   rsvd:1;     /* reserved */
-    unsigned char   vid:8;   	/* vlan id */
-    unsigned char   age:1;      /* age */
-    unsigned char   staticEn:1; /* static */
-    unsigned char   valid:1;    /* valid */
-} ROBO_ARL_SEARCH_RESULT_CTRL_STRUC;
-typedef struct _ROBO_ARL_ENTRY_MAC_STRUC
-{
-    unsigned char   macBytes[6];    /* MAC address */
-} ROBO_ARL_ENTRY_MAC_STRUC;
-
-typedef struct _ROBO_ARL_ENTRY_STRUC
-{
-    ROBO_ARL_ENTRY_MAC_STRUC    mac;    /* MAC address */
-    ROBO_ARL_ENTRY_CTRL_STRUC   ctrl;   /* control bits */
-} ROBO_ARL_ENTRY_STRUC;
-
-typedef struct _ROBO_ARL_SEARCH_RESULT_STRUC
-{
-    ROBO_ARL_ENTRY_MAC_STRUC    mac;    		/* MAC address */
-    ROBO_ARL_SEARCH_RESULT_CTRL_STRUC   ctrl;   /* control bits */
-} ROBO_ARL_SEARCH_RESULT_STRUC;
-
-/* multicast versions of ARL entry structs */
-typedef struct _ROBO_ARL_ENTRY_MCAST_CTRL_STRUC
-{
-    unsigned int    portMask:12;/* multicast port mask */
-    unsigned char   prio:1;     /* priority */
-    unsigned char   gigPort:1;  /* gigabit port 1 mask */
-    unsigned char   staticEn:1; /* static */
-    unsigned char   valid:1;    /* valid */
-} ROBO_ARL_ENTRY_MCAST_CTRL_STRUC;
-typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC
-{
-    unsigned int    portMask:13;   	/* multicast port mask */
-    unsigned char   age:1;      	/* age */
-    unsigned char   staticEn:1; 	/* static */
-    unsigned char   valid:1;    	/* valid */
-} ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC;
-/* BCM5350 extension register */
-typedef struct _ROBO_ARL_SEARCH_RESULT_EXTENSION
-{
-    unsigned int    prio:2;         /* priority */
-    unsigned int    portMask:1;     /* MSB (MII) of port mask for multicast */
-    unsigned int    reserved:5;
-} ROBO_ARL_SEARCH_RESULT_EXTENSION;
-
-typedef struct _ROBO_ARL_ENTRY_MCAST_STRUC
-{
-    ROBO_ARL_ENTRY_MAC_STRUC        mac;    /* MAC address */
-    ROBO_ARL_ENTRY_MCAST_CTRL_STRUC ctrl;   /* control bits */
-} ROBO_ARL_ENTRY_MCAST_STRUC;
-typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_STRUC
-{
-    ROBO_ARL_ENTRY_MAC_STRUC    mac;    				/* MAC address */
-    ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC   ctrl;   	/* control bits */
-} ROBO_ARL_SEARCH_RESULT_MCAST_STRUC;
-
-#define ROBO_ARL_RW_CTRL          0x00 /* ARL Read/Write Control :  8bit */
-#define ROBO_ARL_MAC_ADDR_IDX     0x02 /* MAC Address Index: 48bit */
-#define ROBO_ARL_VID_TABLE_IDX    0x08 /* VID Table Address Index: 8bit */
-#define ROBO_ARL_ENTRY0           0x10 /* ARL Entry 0 : 64 bit */
-#define ROBO_ARL_ENTRY1           0x18 /* ARL Entry 1 : 64 bit */
-#define ROBO_ARL_SEARCH_CTRL      0x20 /* ARL Search Control: 8bit */
-#define ROBO_ARL_SEARCH_ADDR      0x22 /* ARL Search Address: 16bit */
-#define ROBO_ARL_SEARCH_RESULT    0x24 /* ARL Search Result: 64bit */
-#define ROBO_ARL_SEARCH_RESULT_EXT 0x2c /* ARL Search Result Extension (5350): 8bit */
-#define ROBO_ARL_VID_ENTRY0       0x30 /* ARL VID Entry 0: 64bit */
-#define ROBO_ARL_VID_ENTRY1       0x32 /* ARL VID Entry 1: 64bit */
-
-/* BCM5325m MANAGEMENT FRAME REGISTERS (0x6) REGISTER MAP: 8/16 bit regs */
-#define ROBO_MGMT_FRAME_RD_DATA   0x00 /* Management Frame Read Data :8bit*/
-#define ROBO_MGMT_FRAME_WR_DATA   0x01 /* Management Frame Write Data:8bit*/
-#define ROBO_MGMT_FRAME_WR_CTRL   0x02 /* Write Control: 16bit */
-#define ROBO_MGMT_FRAME_RD_STAT   0x04 /* Read Status: 16bit */
-
-/* BCM5325m MEMORY ACCESS REGISTERS (Page 0x08) REGISTER MAP: 32 bit regs */
-#define MEM_TABLE_READ  1               /* for read/write state in mem access reg */
-#define MEM_TABLE_WRITE 0               /* for read/write state in mem access reg */
-#define MEM_TABLE_ACCESS_START 1        /* for mem access read/write start */
-#define MEM_TABLE_ACCESS_DONE  0        /* for mem access read/write done */
-#define VLAN_TABLE_ADDR 0x3800          /* BCM5380 only */
-#ifdef BCM5380
-#define NUM_ARL_TABLE_ENTRIES 4096      /* number of entries in ARL table */
-#define NUM_VLAN_TABLE_ENTRIES 2048     /* number of entries in VLAN table */
-#define ARL_TABLE_ADDR 0                /* offset of ARL table start */
-#else
-#define NUM_ARL_TABLE_ENTRIES 2048      /* number of entries in ARL table */
-#define NUM_VLAN_TABLE_ENTRIES 256      /* number of entries in VLAN table */
-#define ARL_TABLE_ADDR 0x3800           /* offset of ARL table start */
-/* corresponding values for 5350 */
-#define NUM_ARL_TABLE_ENTRIES_5350 1024 /* number of entries in ARL table (5350) */
-#define NUM_VLAN_TABLE_ENTRIES_5350 16  /* number of entries in VLAN table */
-#define ARL_TABLE_ADDR_5350 0x1c00      /* offset of ARL table start (5350) */
-#endif
-typedef struct _ROBO_MEM_ACCESS_CTRL_STRUC
-{
-    unsigned int    memAddr:14; /* 64-bit memory address */
-    unsigned char   rsvd:4;     /* reserved */
-    unsigned char   readEn:1;   /* read enable (0 == write) */
-    unsigned char   startDone:1;/* memory access start/done */
-    unsigned int    rsvd1:12;   /* reserved */
-} ROBO_MEM_ACCESS_CTRL_STRUC;
-typedef struct _ROBO_MEM_ACCESS_DATA_STRUC
-{
-    unsigned int    memData[2]; /* 64-bit data */
-    unsigned short  rsvd;       /* reserved */
-} ROBO_MEM_ACCESS_DATA_STRUC;
-
-#ifdef BCM5380
-typedef struct _ROBO_ARL_TABLE_DATA_STRUC
-{
-    unsigned char   MACaddr[6]; /* MAC addr */
-    unsigned int    portID:4;   /* port ID */
-    unsigned int    chipID:2;   /* chip ID */
-    unsigned int    rsvd:6;     /* reserved */
-    unsigned int    highPrio:1; /* high priority address */
-    unsigned int    age:1;      /* entry accessed/learned since ageing process */
-    unsigned int    staticAddr:1;/* entry is static */
-    unsigned int    valid:1;    /* entry is valid */
-    unsigned int    vid:12;     /* vlan id */
-    unsigned int    rsvd2:4;    /* reserved */
-} ROBO_ARL_TABLE_DATA_STRUC;
-#else
-typedef struct _ROBO_ARL_TABLE_DATA_STRUC
-{
-    unsigned char   MACaddr[6]; /* MAC addr */
-    unsigned int    portID:4;   /* port ID */
-    unsigned int    chipID:2;   /* chip ID */
-    unsigned int    rsvd:7;     /* reserved */
-    unsigned int    age:1;      /* entry accessed/learned since ageing process */
-    unsigned int    staticAddr:1;/* entry is static */
-    unsigned int    valid:1;    /* entry is valid */
-} ROBO_ARL_TABLE_DATA_STRUC;
-#endif
-
-/* multicast format*/
-typedef struct _ROBO_ARL_TABLE_MCAST_DATA_STRUC
-{
-    unsigned char   MACaddr[6]; /* MAC addr */
-    unsigned int    portMask:12;/* multicast port mask */
-    unsigned char   prio:1;     /* priority */
-    unsigned char   gigPort:1;  /* gigabit port 1 mask */
-    unsigned char   staticEn:1; /* static */
-    unsigned char   valid:1;    /* valid */
-    unsigned int    vid:12;     /* vlan id */
-    unsigned int    rsvd2:4;    /* reserved */
-} ROBO_ARL_TABLE_MCAST_DATA_STRUC;
-#define ROBO_MEM_ACCESS_CTRL      0x00 /* Memory Read/Write Control :32bit*/
-#define ROBO_MEM_ACCESS_DATA      0x04 /* Memory Read/Write Data:64bit*/
-
-/* BCM5325m SWITCH PORT (0x10-18) REGISTER MAP: 8/16 bit regs */
-typedef struct _ROBO_MII_CTRL_STRUC
-{
-    unsigned char   rsvd:8;     /* reserved */
-    unsigned char   duplex:1;   /* duplex mode */
-    unsigned char   restartAN:1;/* restart auto-negotiation */
-    unsigned char   rsvd1:1;    /* reserved */
-    unsigned char   powerDown:1;/* power down */
-    unsigned char   ANenable:1; /* auto-negotiation enable */
-    unsigned char   speed:1;    /* forced speed selection */
-    unsigned char   loopback:1; /* loopback */
-    unsigned char   reset:1;    /* reset */
-} ROBO_MII_CTRL_STRUC;
-typedef struct _ROBO_MII_AN_ADVERT_STRUC
-{
-    unsigned char   selector:5;     /* advertise selector field */
-    unsigned char   T10BaseT:1;     /* advertise 10BaseT */
-    unsigned char   T10BaseTFull:1; /* advertise 10BaseT, full duplex */
-    unsigned char   T100BaseX:1;    /* advertise 100BaseX */
-    unsigned char   T100BaseXFull:1;/* advertise 100BaseX full duplex */
-    unsigned char   noT4:1;         /* do not advertise T4 */
-    unsigned char   pause:1;        /* advertise pause for full duplex */
-    unsigned char   rsvd:2;         /* reserved */
-    unsigned char   remoteFault:1;  /* transmit remote fault */
-    unsigned char   rsvd1:1;        /* reserved */
-    unsigned char   nextPage:1;     /* nex page operation supported */
-} ROBO_MII_AN_ADVERT_STRUC;
-#define ROBO_MII_CTRL                 0x00 /* Port MII Control */
-#define ROBO_MII_STAT                 0x02 /* Port MII Status  */
-/* Fields of link status register */
-#define ROBO_MII_STAT_JABBER          (1<<1) /* Jabber detected */
-#define ROBO_MII_STAT_LINK            (1<<2) /* Link status */
-
-#define ROBO_MII_PHYID_HI             0x04 /* Port PHY ID High */
-#define ROBO_MII_PHYID_LO             0x06 /* Port PHY ID Low */
-#define ROBO_MII_ANA_REG              0x08 /* MII Auto-Neg Advertisement */
-#define ROBO_MII_ANP_REG              0x0a /* MII Auto-Neg Partner Ability */
-#define ROBO_MII_AN_EXP_REG           0x0c /* MII Auto-Neg Expansion */
-#define ROBO_MII_AN_NP_REG            0x0e /* MII next page */
-#define ROBO_MII_ANP_NP_REG           0x10 /* MII Partner next page */
-#define ROBO_MII_100BX_AUX_CTRL       0x20 /* 100BASE-X Auxiliary Control */
-#define ROBO_MII_100BX_AUX_STAT       0x22 /* 100BASE-X Auxiliary Status  */
-#define ROBO_MII_100BX_RCV_ERR_CTR    0x24 /* 100BASE-X Receive Error Ctr */
-#define ROBO_MII_100BX_RCV_FS_ERR     0x26 /* 100BASE-X Rcv False Sense Ctr */
-#define ROBO_MII_AUX_CTRL             0x30 /* Auxiliary Control/Status */
-/* Fields of Auxiliary control register */
-#define ROBO_MII_AUX_CTRL_FD         (1<<0) /* Full duplex link detected*/
-#define ROBO_MII_AUX_CTRL_SP100      (1<<1) /* Speed 100 indication */
-#define ROBO_MII_AUX_STATUS           0x32 /* Aux Status Summary */
-#define ROBO_MII_CONN_STATUS          0x34 /* Aux Connection Status */
-#define ROBO_MII_AUX_MODE2            0x36 /* Aux Mode 2 */
-#define ROBO_MII_AUX_ERR_STATUS       0x38 /* Aux Error and General Status */
-#define ROBO_MII_AUX_MULTI_PHY        0x3c /* Aux Multiple PHY Register*/
-#define ROBO_MII_BROADCOM_TEST        0x3e /* Broadcom Test Register */
-
-
-/* BCM5325m PORT MIB REGISTERS (Pages 0x20-0x24,0x28) REGISTER MAP: 64/32 */
-/* Tranmit Statistics */
-#define ROBO_MIB_TX_OCTETS            0x00 /* 64b: TxOctets */
-#define ROBO_MIB_TX_DROP_PKTS         0x08 /* 32b: TxDropPkts */
-#define ROBO_MIB_TX_BC_PKTS           0x10 /* 32b: TxBroadcastPkts */
-#define ROBO_MIB_TX_MC_PKTS           0x14 /* 32b: TxMulticastPkts */
-#define ROBO_MIB_TX_UC_PKTS           0x18 /* 32b: TxUnicastPkts */
-#define ROBO_MIB_TX_COLLISIONS        0x1c /* 32b: TxCollisions */
-#define ROBO_MIB_TX_SINGLE_COLLISIONS 0x20 /* 32b: TxSingleCollision */
-#define ROBO_MIB_TX_MULTI_COLLISIONS  0x24 /* 32b: TxMultiCollision */
-#define ROBO_MIB_TX_DEFER_TX          0x28 /* 32b: TxDeferred Transmit */
-#define ROBO_MIB_TX_LATE_COLLISIONS   0x2c /* 32b: TxLateCollision */
-#define ROBO_MIB_EXCESS_COLLISIONS    0x30 /* 32b: TxExcessiveCollision*/
-#define ROBO_MIB_FRAME_IN_DISCARDS    0x34 /* 32b: TxFrameInDiscards */
-#define ROBO_MIB_TX_PAUSE_PKTS        0x38 /* 32b: TxPausePkts */
-
-/* Receive Statistics */
-#define ROBO_MIB_RX_OCTETS            0x44 /* 64b: RxOctets */
-#define ROBO_MIB_RX_UNDER_SIZE_PKTS   0x4c /* 32b: RxUndersizePkts(runts)*/
-#define ROBO_MIB_RX_PAUSE_PKTS        0x50 /* 32b: RxPausePkts */
-#define ROBO_MIB_RX_PKTS_64           0x54 /* 32b: RxPkts64Octets */
-#define ROBO_MIB_RX_PKTS_65_TO_127    0x58 /* 32b: RxPkts64to127Octets*/
-#define ROBO_MIB_RX_PKTS_128_TO_255   0x5c /* 32b: RxPkts128to255Octets*/
-#define ROBO_MIB_RX_PKTS_256_TO_511   0x60 /* 32b: RxPkts256to511Octets*/
-#define ROBO_MIB_RX_PKTS_512_TO_1023  0x64 /* 32b: RxPkts512to1023Octets*/
-#define ROBO_MIB_RX_PKTS_1024_TO_1522 0x68 /* 32b: RxPkts1024to1522Octets*/
-#define ROBO_MIB_RX_OVER_SIZE_PKTS    0x6c /* 32b: RxOversizePkts*/
-#define ROBO_MIB_RX_JABBERS           0x70 /* 32b: RxJabbers*/
-#define ROBO_MIB_RX_ALIGNMENT_ERRORS  0x74 /* 32b: RxAlignmentErrors*/
-#define ROBO_MIB_RX_FCS_ERRORS        0x78 /* 32b: RxFCSErrors */
-#define ROBO_MIB_RX_GOOD_OCTETS       0x7c /* 32b: RxGoodOctets */
-#define ROBO_MIB_RX_DROP_PKTS         0x84 /* 32b: RxDropPkts */
-#define ROBO_MIB_RX_UC_PKTS           0x88 /* 32b: RxUnicastPkts */
-#define ROBO_MIB_RX_MC_PKTS           0x8c /* 32b: RxMulticastPkts */
-#define ROBO_MIB_RX_BC_PKTS           0x90 /* 32b: RxBroadcastPkts */
-#define ROBO_MIB_RX_SA_CHANGES        0x94 /* 32b: RxSAChanges */
-#define ROBO_MIB_RX_FRAGMENTS         0x98 /* 32b: RxFragments */
-#define ROBO_MIB_RX_EXCESS_SZ_DISC    0x9c /* 32b: RxExcessSizeDisc*/
-#define ROBO_MIB_RX_SYMBOL_ERROR      0xa0 /* 32b: RxSymbolError */
-
-/* BCM5350 MIB Statistics */
-/* Group 0 */
-#define ROBO_MIB_TX_GOOD_PKTS         0x00 /* 16b: TxGoodPkts */
-#define ROBO_MIB_TX_UNICAST_PKTS      0x02 /* 16b: TxUnicastPkts */
-#define ROBO_MIB_RX_GOOD_PKTS         0x04 /* 16b: RxGoodPkts */
-#define ROBO_MIB_RX_GOOD_UNICAST_PKTS 0x06 /* 16b: RxGoodUnicastPkts */
-/* Group 1 */
-#define ROBO_MIB_TX_COLLISION         0x00 /* 16b: TxCollision */
-#define ROBO_MIB_TX_OCTETS_5350       0x02 /* 16b: TxOctets */
-#define ROBO_MIB_RX_FCS_ERRORS_5350   0x04 /* 16b: RxFCSErrors */
-#define ROBO_MIB_RX_GOOD_OCTETS_5350  0x06 /* 16b: RxGoodOctets */
-
-/* BCM5325m QoS REGISTERS (Page 0x30) REGISTER MAP: 8/16 */
-#define ROBO_QOS_CTRL                 0x00 /* 16b: QoS Control Register */
-#define ROBO_QOS_LOCAL_WEIGHT_CTRL    0x10 /* 8b: Local HQ/LQ Weight Register*/
-#define ROBO_QOS_CPU_WEIGHT_CTRL      0x12 /* 8b: CPU HQ/LQ Weight Register*/
-#define ROBO_QOS_PAUSE_ENA            0x13 /* 16b: Qos Pause Enable Register*/
-#define ROBO_QOS_PRIO_THRESHOLD       0x15 /* 8b: Priority Threshold Register*/
-#define ROBO_QOS_RESERVED             0x16 /* 8b: Qos Reserved Register */
-
-/* BCM5325m VLAN REGISTERS (Page 0x34) REGISTER MAP: 8/16bit */
-typedef struct _ROBO_VLAN_CTRL0_STRUC
-{
-    unsigned char   frameControlP:2;    /* 802.1P frame control */
-    unsigned char   frameControlQ:2;    /* 802.1Q frame control */
-    unsigned char   dropMissedVID:1;    /* enable drop missed VID packet */
-    unsigned char   vidMacHash:1;       /* VID_MAC hash enable */
-    unsigned char   vidMacCheck:1;      /* VID_MAC check enable */
-    unsigned char   VLANen:1;           /* 802.1Q VLAN enable */
-} ROBO_VLAN_CTRL0_STRUC;
-#define VLAN_TABLE_WRITE 1              /* for read/write state in table access reg */
-#define VLAN_TABLE_READ 0               /* for read/write state in table access reg */
-#define VLAN_ID_HIGH_BITS 0             /* static high bits in table access reg */
-#define VLAN_ID_MAX 255                 /* max VLAN id */
-#define VLAN_ID_MAX5350 15              /* max VLAN id (5350) */
-#define VLAN_ID_MASK VLAN_ID_MAX        /* VLAN id mask */
-#ifdef BCM5380
-#define VLAN_UNTAG_SHIFT 13             /* for postioning untag bits in write reg */
-#define VLAN_VALID 0x4000000             /* valid bit in write reg */
-#else
-#define VLAN_UNTAG_SHIFT 7              /* for postioning untag bits in write reg */
-#define VLAN_VALID 0x4000               /* valid bit in write reg */
-/* corresponding values for 5350 */
-#define VLAN_UNTAG_SHIFT_5350 6         /* for postioning untag bits in write reg */
-#define VLAN_VALID_5350 0x00100000      /* valid bit in write reg */
-#endif
-typedef struct _ROBO_VLAN_TABLE_ACCESS_STRUC
-{
-    unsigned char   VLANid:8;           /* VLAN ID (low 8 bits) */
-    unsigned char   VLANidHi:4;         /* VLAN ID (fixed upper portion) */
-    unsigned char   readWriteState:1;   /* read/write state (write = 1) */
-    volatile unsigned char   readWriteEnable:1;  /* table read/write enable */
-    unsigned char   rsvd:2;             /* reserved */
-} ROBO_VLAN_TABLE_ACCESS_STRUC;
-#ifdef BCM5380
-typedef struct _ROBO_VLAN_READ_WRITE_STRUC
-{
-    unsigned int    VLANgroup:13;/* VLAN group mask */
-    unsigned int    VLANuntag:13;/* VLAN untag enable mask */
-    unsigned char   valid:1;     /* valid */
-    unsigned char   rsvd:5;      /* reserved */
-} ROBO_VLAN_READ_WRITE_STRUC;
-#else
-typedef struct _ROBO_VLAN_READ_WRITE_STRUC
-{
-    unsigned char   VLANgroup:7;         /* VLAN group mask */
-    unsigned char   VLANuntag:7;         /* VLAN untag enable mask */
-    unsigned char   valid:1;             /* valid */
-    unsigned char   rsvd:1;              /* reserved */
-} ROBO_VLAN_READ_WRITE_STRUC;
-typedef struct _ROBO_VLAN_READ_WRITE_STRUC_5350
-{
-    unsigned char   VLANgroup:6;         /* VLAN group mask */
-    unsigned char   VLANuntag:6;         /* VLAN untag enable mask */
-    unsigned char   highVID:8;           /* upper bits of vid */
-    unsigned char   valid:1;             /* valid */
-    unsigned int    rsvd:11;             /* reserved */
-} ROBO_VLAN_READ_WRITE_STRUC_5350;
-#endif
-#define ROBO_VLAN_CTRL0             0x00 /* 8b: VLAN Control 0 Register */
-#define ROBO_VLAN_CTRL1             0x01 /* 8b: VLAN Control 1 Register */
-#define ROBO_VLAN_CTRL2             0x02 /* 8b: VLAN Control 2 Register */
-#define ROBO_VLAN_CTRL3             0x03 /* 8b: VLAN Control 3 Register */
-#define ROBO_VLAN_CTRL4             0x04 /* 8b: VLAN Control 4 Register */
-#define ROBO_VLAN_CTRL5             0x05 /* 8b: VLAN Control 5 Register */
-#define ROBO_VLAN_TABLE_ACCESS      0x08 /* 14b: VLAN Table Access Register */
-#define ROBO_VLAN_TABLE_ACCESS_5350 0x06 /* 14b: VLAN Table Access Register (5350) */
-#define ROBO_VLAN_WRITE             0x0a /* 15b: VLAN Write Register */
-#define ROBO_VLAN_WRITE_5350        0x08 /* 15b: VLAN Write Register (5350) */
-#define ROBO_VLAN_READ              0x0c /* 15b: VLAN Read Register */
-#define ROBO_VLAN_PORT0_DEF_TAG     0x10 /* 16b: VLAN Port 0 Default Tag Register */
-#define ROBO_VLAN_PORT1_DEF_TAG     0x12 /* 16b: VLAN Port 1 Default Tag Register */
-#define ROBO_VLAN_PORT2_DEF_TAG     0x14 /* 16b: VLAN Port 2 Default Tag Register */
-#define ROBO_VLAN_PORT3_DEF_TAG     0x16 /* 16b: VLAN Port 3 Default Tag Register */
-#define ROBO_VLAN_PORT4_DEF_TAG     0x18 /* 16b: VLAN Port 4 Default Tag Register */
-#define ROBO_VLAN_PORTMII_DEF_TAG   0x1a /* 16b: VLAN Port MII Default Tag Register */
-/* 5380 only */
-#define ROBO_VLAN_PORT5_DEF_TAG     0x1a /* 16b: VLAN Port 5 Default Tag Register */
-#define ROBO_VLAN_PORT6_DEF_TAG     0x1c /* 16b: VLAN Port 6 Default Tag Register */
-#define ROBO_VLAN_PORT7_DEF_TAG     0x1e /* 16b: VLAN Port 7 Default Tag Register */
-
-/* obsolete */
-#define ROBO_VLAN_PORT0_CTRL       0x00 /* 16b: Port 0 VLAN  Register */
-#define ROBO_VLAN_PORT1_CTRL       0x02 /* 16b: Port 1 VLAN  Register */
-#define ROBO_VLAN_PORT2_CTRL       0x04 /* 16b: Port 2 VLAN  Register */
-#define ROBO_VLAN_PORT3_CTRL       0x06 /* 16b: Port 3 VLAN  Register */
-#define ROBO_VLAN_PORT4_CTRL       0x08 /* 16b: Port 4 VLAN  Register */
-#define ROBO_VLAN_IM_PORT_CTRL     0x10 /* 16b: Inverse MII Port VLAN Reg */
-#define ROBO_VLAN_SMP_PORT_CTRL    0x12 /* 16b: Serial Port VLAN  Register */
-#define ROBO_VLAN_PORTSPI_DEF_TAG  0x1c /* 16b: VLAN Port SPI Default Tag Register */
-#define ROBO_VLAN_PRIORITY_REMAP   0x20 /* 24b: VLAN Priority Re-Map Register */
-
-#ifndef _CFE_
-#pragma pack()
-#endif
-
-
-#endif /* !__BCM535M_H_ */
-
-
-
-
-
diff --git a/openwrt/target/linux/package/switch/src/gpio.h b/openwrt/target/linux/package/switch/src/gpio.h
deleted file mode 100644
index 8257600331..0000000000
--- a/openwrt/target/linux/package/switch/src/gpio.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __GPIO_H
-#define __GPIO_H
-
-#if defined(BCMGPIO2)
-
-#ifdef LINUX_2_4
-#define sbh bcm947xx_sbh
-extern void *bcm947xx_sbh;
-#else
-extern void *sbh;
-#endif
-
-extern __u32 sb_gpioin(void *sbh);
-extern __u32 sb_gpiointpolarity(void *sbh, __u32 mask, __u32 val, __u8 prio);
-extern __u32 sb_gpiointmask(void *sbh, __u32 mask, __u32 val, __u8 prio);
-extern __u32 sb_gpioouten(void *sbh, __u32 mask, __u32 val, __u8 prio);
-extern __u32 sb_gpioout(void *sbh, __u32 mask, __u32 val, __u8 prio);
-
-#define gpioin() sb_gpioin(sbh)
-#define gpiointpolarity(mask,val) sb_gpiointpolarity(sbh, mask, val, 0)
-#define gpiointmask(mask,val) sb_gpiointmask(sbh, mask, val, 0)
-#define gpioouten(mask,val) sb_gpioouten(sbh, mask, val, 0)
-#define gpioout(mask,val) sb_gpioout(sbh, mask, val, 0)
-
-#elif defined(BCMGPIO)
-
-#define sbh bcm947xx_sbh
-extern void *bcm947xx_sbh;
-extern __u32 sb_gpioin(void *sbh);
-extern __u32 sb_gpiointpolarity(void *sbh, __u32 mask, __u32 val);
-extern __u32 sb_gpiointmask(void *sbh, __u32 mask, __u32 val);
-extern __u32 sb_gpioouten(void *sbh, __u32 mask, __u32 val);
-extern __u32 sb_gpioout(void *sbh, __u32 mask, __u32 val);
-
-#define gpioin() sb_gpioin(sbh)
-#define gpiointpolarity(mask,val) sb_gpiointpolarity(sbh, mask, val)
-#define gpiointmask(mask,val) sb_gpiointmask(sbh, mask, val)
-#define gpioouten(mask,val) sb_gpioouten(sbh, mask, val)
-#define gpioout(mask,val) sb_gpioout(sbh, mask, val)
-
-#else
-#error Unsupported/unknown GPIO configuration
-#endif
-
-#endif /* __GPIO_H */
diff --git a/openwrt/target/linux/package/switch/src/switch-adm.c b/openwrt/target/linux/package/switch/src/switch-adm.c
deleted file mode 100644
index 8d27120018..0000000000
--- a/openwrt/target/linux/package/switch/src/switch-adm.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * ADMTEK Adm6996 switch configuration module
- *
- * Copyright (C) 2005 Felix Fietkau <nbd@nbd.name>
- * 
- * Partially based on Broadcom Home Networking Division 10/100 Mbit/s
- * Ethernet Device Driver (from Montavista 2.4.20_mvl31 Kernel).
- * Copyright (C) 2004 Broadcom Corporation
- *
- * adm_rreg function from adm6996
- * Copyright (C) 2004 Nikki Chumakov <nikki@gattaca.ru>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  
- * 02110-1301, USA.
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/if.h>
-#include <linux/if_arp.h>
-#include <linux/sockios.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-
-#include "switch-core.h"
-#include "gpio.h"
-
-#define DRIVER_NAME "adm6996"
-#define DRIVER_VERSION "0.01"
-
-static int eecs = 0;
-static int eesk = 0;
-static int eedi = 0;
-static int eerc = 0;
-static int force = 0;
-
-MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
-MODULE_LICENSE("GPL");
-MODULE_PARM(eecs, "i");
-MODULE_PARM(eesk, "i");
-MODULE_PARM(eedi, "i");
-MODULE_PARM(eerc, "i");
-MODULE_PARM(force, "i");
-
-/* Minimum timing constants */
-#define EECK_EDGE_TIME  3   /* 3us - max(adm 2.5us, 93c 1us) */
-#define EEDI_SETUP_TIME 1   /* 1us - max(adm 10ns, 93c 400ns) */
-#define EECS_SETUP_TIME 1   /* 1us - max(adm no, 93c 200ns) */
-
-/* Handy macros for writing fixed length values */
-#define adm_write8(cs, b) { __u8 val = (__u8) (b); adm_write(cs, &val, sizeof(val)*8); }
-#define adm_write16(cs, w) { __u16 val = hton16(w); adm_write(cs, (__u8 *)&val, sizeof(val)*8); }
-#define adm_write32(cs, i) { uint32 val = hton32(i); adm_write(cs, (__u8 *)&val, sizeof(val)*8); }
-
-#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
-
-#if defined(BCMGPIO2) || defined(BCMGPIO)
-extern char *nvram_get(char *name);
-
-/* Return gpio pin number assigned to the named pin */
-/*
-* Variable should be in format:
-*
-*	gpio<N>=pin_name
-*
-* 'def_pin' is returned if there is no such variable found.
-*/
-static unsigned int getgpiopin(char *pin_name, unsigned int def_pin)
-{
-	char name[] = "gpioXXXX";
-	char *val;
-	unsigned int pin;
-
-	/* Go thru all possibilities till a match in pin name */
-	for (pin = 0; pin < 16; pin ++) {
-		sprintf(name, "gpio%d", pin);
-		val = nvram_get(name);
-		if (val && !strcmp(val, pin_name))
-			return pin;
-	}
-	return def_pin;
-}
-#endif
-
-
-static void adm_write(int cs, char *buf, unsigned int bits)
-{
-	int i, len = (bits + 7) / 8;
-	__u8 mask;
-
-	gpioout(eecs, (cs ? eecs : 0));
-	udelay(EECK_EDGE_TIME);
-
-	/* Byte assemble from MSB to LSB */
-	for (i = 0; i < len; i++) {
-		/* Bit bang from MSB to LSB */
-		for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) {
-			/* Clock low */
-			gpioout(eesk, 0);
-			udelay(EECK_EDGE_TIME);
-
-			/* Output on rising edge */
-			gpioout(eedi, ((mask & buf[i]) ? eedi : 0));
-			udelay(EEDI_SETUP_TIME);
-
-			/* Clock high */
-			gpioout(eesk, eesk);
-			udelay(EECK_EDGE_TIME);
-		}
-	}
-
-	/* Clock low */
-	gpioout(eesk, 0);
-	udelay(EECK_EDGE_TIME);
-
-	if (cs)
-		gpioout(eecs, 0);
-}
-
-
-static void adm_read(int cs, char *buf, unsigned int bits)
-{
-	int i, len = (bits + 7) / 8;
-	__u8 mask;
-
-	gpioout(eecs, (cs ? eecs : 0));
-	udelay(EECK_EDGE_TIME);
-
-	/* Byte assemble from MSB to LSB */
-	for (i = 0; i < len; i++) {
-		__u8 byte;
-
-		/* Bit bang from MSB to LSB */
-		for (mask = 0x80, byte = 0; mask && bits > 0; mask >>= 1, bits --) {
-			__u8 gp;
-
-			/* Clock low */
-			gpioout(eesk, 0);
-			udelay(EECK_EDGE_TIME);
-
-			/* Input on rising edge */
-			gp = gpioin();
-			if (gp & eedi)
-				byte |= mask;
-
-			/* Clock high */
-			gpioout(eesk, eesk);
-			udelay(EECK_EDGE_TIME);
-		}
-
-		*buf++ = byte;
-	}
-
-	/* Clock low */
-	gpioout(eesk, 0);
-	udelay(EECK_EDGE_TIME);
-
-	if (cs)
-		gpioout(eecs, 0);
-}
-
-
-/* Enable outputs with specified value to the chip */
-static void adm_enout(__u8 pins, __u8 val)
-{   
-	/* Prepare GPIO output value */
-	gpioout(pins, val);
-	
-	/* Enable GPIO outputs */
-	gpioouten(pins, pins);
-	udelay(EECK_EDGE_TIME);
-}
-
-
-/* Disable outputs to the chip */
-static void adm_disout(__u8 pins)
-{   
-	/* Disable GPIO outputs */
-	gpioouten(pins, 0);
-	udelay(EECK_EDGE_TIME);
-}
-
-
-/* Advance clock(s) */
-static void adm_adclk(int clocks)
-{
-	int i;
-	for (i = 0; i < clocks; i++) {
-		/* Clock high */
-		gpioout(eesk, eesk);
-		udelay(EECK_EDGE_TIME);
-
-		/* Clock low */
-		gpioout(eesk, 0);
-		udelay(EECK_EDGE_TIME);
-	}
-}
-
-static __u32 adm_rreg(__u8 table, __u8 addr)
-{
-	/* cmd: 01 10 T DD R RRRRRR */
-	__u8 bits[6] = {
-		0xFF, 0xFF, 0xFF, 0xFF,
-		(0x06 << 4) | ((table & 0x01) << 3 | (addr&64)>>6),
-		((addr&62)<<2)
-	};
-
-	__u8 rbits[4];
-
-	/* Enable GPIO outputs with all pins to 0 */
-	adm_enout((__u8)(eecs | eesk | eedi), 0);
-
-	adm_write(0, bits, 46);
-	adm_disout((__u8)(eedi));
-	adm_adclk(2);
-	adm_read (0, rbits, 32);
-
-	/* Extra clock(s) required per datasheet */
-	adm_adclk(2);
-
-	/* Disable GPIO outputs */
-	adm_disout((__u8)(eecs | eesk));
-
-	if (!table) /* EEPROM has 16-bit registers, but pumps out two registers in one request */
-		return (addr & 0x01 ?  (rbits[0]<<8) | rbits[1] : (rbits[2]<<8) | (rbits[3]));
-	else
-		return (rbits[0]<<24) | (rbits[1]<<16) | (rbits[2]<<8) | rbits[3];
-}
-
-
-
-/* Write chip configuration register */
-/* Follow 93c66 timing and chip's min EEPROM timing requirement */
-void
-adm_wreg(__u8 addr, __u16 val)
-{
-	/* cmd(27bits): sb(1) + opc(01) + addr(bbbbbbbb) + data(bbbbbbbbbbbbbbbb) */
-	__u8 bits[4] = {
-		(0x05 << 5) | (addr >> 3),
-		(addr << 5) | (__u8)(val >> 11),
-		(__u8)(val >> 3),
-		(__u8)(val << 5)
-	};
-
-	/* Enable GPIO outputs with all pins to 0 */
-	adm_enout((__u8)(eecs | eesk | eedi), 0);
-
-	/* Write cmd. Total 27 bits */
-	adm_write(1, bits, 27);
-
-	/* Extra clock(s) required per datasheet */
-	adm_adclk(2);
-
-	/* Disable GPIO outputs */
-	adm_disout((__u8)(eecs | eesk | eedi));
-}
-
-
-/* Port configuration registers */
-static int port_conf[] = { 0x01, 0x03, 0x05, 0x07, 0x08, 0x09 };
-
-/* Bits in VLAN port mapping */
-static int vlan_ports[] = { 1 << 0, 1 << 2, 1 << 4, 1 << 6, 1 << 7, 1 << 8 };
-
-static int handle_vlan_port_read(void *driver, char *buf, int nr)
-{
-	int ports, i, c, len = 0;
-			
-	if ((nr < 0) || (nr > 15))
-		return 0;
-
-	/* Get VLAN port map */
-	ports = adm_rreg(0, 0x13 + nr);
-	
-	for (i = 0; i <= 5; i++) {
-		if (ports & vlan_ports[i]) {
-			c = adm_rreg(0, port_conf[i]);
-			
-			len += sprintf(buf + len, "%d", i);
-			if (c & (1 << 4)) {
-				buf[len++] = 't';
-				if (((c & (0xf << 10)) >> 10) == nr)
-					buf[len++] = '*';
-			} else if (i == 5)
-				buf[len++] = 'u';
-
-			buf[len++] = '\t';
-		}
-	}
-	len += sprintf(buf + len, "\n");
-
-	return len;
-}
-
-static int handle_vlan_port_write(void *driver, char *buf, int nr)
-{
-	int i, cfg, ports;
-	switch_driver *d = (switch_driver *) driver;
-	switch_vlan_config *c = switch_parse_vlan(d, buf);
-
-	if (c == NULL)
-		return -1;
-
-	ports = adm_rreg(0, 0x13 + nr);
-	for (i = 0; i < d->ports; i++) {
-		if (c->port & (1 << i)) {
-			ports |= vlan_ports[i];
-
-			cfg = adm_rreg(0, port_conf[i]);
-			
-			/* Tagging */
-			if (c->untag & (1 << i))
-				cfg &= ~(1 << 4);
-			else
-				cfg |= (1 << 4);
-			
-			if ((c->untag | c->pvid) & (1 << i)) {
-				cfg = (cfg & ~(0xf << 10)) | (nr << 10);
-			}
-			
-			adm_wreg(port_conf[i], (__u16) cfg);
-		} else {
-			ports &= ~(vlan_ports[i]);
-		}
-	}
-	adm_wreg(0x13 + nr, (__u16) ports);
-
-	return 0;
-}
-
-static int handle_port_enable_read(void *driver, char *buf, int nr)
-{
-	return sprintf(buf, "%d\n", ((adm_rreg(0, port_conf[nr]) & (1 << 5)) ? 0 : 1));
-}
-
-static int handle_port_enable_write(void *driver, char *buf, int nr)
-{
-	int reg = adm_rreg(0, port_conf[nr]);
-	
-	if (buf[0] == '0')
-		reg |= (1 << 5);
-	else if (buf[0] == '1')
-		reg &= ~(1 << 5);
-	else return -1;
-
-	adm_wreg(port_conf[nr], (__u16) reg);
-	return 0;
-}
-
-static int handle_port_media_read(void *driver, char *buf, int nr)
-{
-	int len;
-	int media = 0;
-	int reg = adm_rreg(0, port_conf[nr]);
-
-	if (reg & (1 << 1))
-		media |= SWITCH_MEDIA_AUTO;
-	if (reg & (1 << 2))
-		media |= SWITCH_MEDIA_100;
-	if (reg & (1 << 3))
-		media |= SWITCH_MEDIA_FD;
-
-	len = switch_print_media(buf, media);
-	return len + sprintf(buf + len, "\n");
-}
-
-static int handle_port_media_write(void *driver, char *buf, int nr)
-{
-	int media = switch_parse_media(buf);
-	int reg = adm_rreg(0, port_conf[nr]);
-
-	if (media < 0)
-		return -1;
-	
-	reg &= ~((1 << 1) | (1 << 2) | (1 << 3));
-	if (media & SWITCH_MEDIA_AUTO)
-		reg |= 1 << 1;
-	if (media & SWITCH_MEDIA_100)
-		reg |= 1 << 2;
-	if (media & SWITCH_MEDIA_FD)
-		reg |= 1 << 3;
-
-	adm_wreg(port_conf[nr], reg);
-	
-	return 0;
-}
-
-static int handle_vlan_enable_read(void *driver, char *buf, int nr)
-{
-	return sprintf(buf, "%d\n", ((adm_rreg(0, 0x11) & (1 << 5)) ? 1 : 0));
-}
-
-static int handle_vlan_enable_write(void *driver, char *buf, int nr)
-{
-	int reg = adm_rreg(0, 0x11);
-	
-	if (buf[0] == '1')
-		reg |= (1 << 5);
-	else if (buf[0] == '0')
-		reg &= ~(1 << 5);
-	else return -1;
-
-	adm_wreg(0x11, (__u16) reg);
-	return 0;
-}
-
-static int handle_reset(void *driver, char *buf, int nr)
-{
-	int i;
-	u32 cfg;
-
-	/*
-	 * Reset sequence: RC high->low(100ms)->high(30ms)
-	 *
-	 * WAR: Certain boards don't have the correct power on 
-	 * reset logic therefore we must explicitly perform the
-	 * sequence in software.
-	 */
-	if (eerc) {
-		/* Keep RC high for at least 20ms */
-		adm_enout(eerc, eerc);
-		for (i = 0; i < 20; i ++)
-			udelay(1000);
-		/* Keep RC low for at least 100ms */
-		adm_enout(eerc, 0);
-		for (i = 0; i < 100; i++)
-			udelay(1000);
-		/* Set default configuration */
-		adm_enout((__u8)(eesk | eedi), eesk);
-		/* Keep RC high for at least 30ms */
-		adm_enout(eerc, eerc);
-		for (i = 0; i < 30; i++)
-			udelay(1000);
-		/* Leave RC high and disable GPIO outputs */
-		adm_disout((__u8)(eecs | eesk | eedi));
-	
-	}
-
-	/* set up initial configuration for cpu port */
-	cfg = (0x8000 | /* Auto MDIX */
-	      (0xf << 10) | /* PVID */
-		  (1 << 4) | /* Tagging */
-		  0xf); /* full duplex, 100Mbps, auto neg, flow ctrl */
-	adm_wreg(port_conf[5], cfg);
-	
-	/* vlan mode select register (0x11): vlan on, mac clone */
-	adm_wreg(0x11, 0xff30);
-
-	return 0;
-}
-
-static int handle_registers(void *driver, char *buf, int nr)
-{
-	int i, len = 0;
-	
-	for (i = 0; i <= 0x33; i++) {
-		len += sprintf(buf + len, "0x%02x: 0x%04x\n", i, adm_rreg(0, i));
-	}
-
-	return len;
-}
-
-static int handle_counters(void *driver, char *buf, int nr)
-{
-	int i, len = 0;
-
-	for (i = 0; i <= 0x3c; i++) {
-		len += sprintf(buf + len, "0x%02x: 0x%08x\n", i, adm_rreg(1, i));
-	}
-
-	return len;
-}
-
-static int detect_adm()
-{
-	int ret = 0;
-
-#if defined(BCMGPIO2) || defined(BCMGPIO)
-	int boardflags = atoi(nvram_get("boardflags"));
-
-	if ((boardflags & 0x80) || force) {
-		ret = 1;
-
-		eecs = getgpiopin("adm_eecs", 2);
-		eesk = getgpiopin("adm_eesk", 3);
-		eedi = getgpiopin("adm_eedi", 4);
-		eerc = getgpiopin("adm_rc", 0);
-
-	} else if ((strcmp(nvram_get("boardtype") ?: "", "bcm94710dev") == 0) &&
-			(strncmp(nvram_get("boardnum") ?: "", "42", 2) == 0)) {
-		/* WRT54G v1.1 hack */
-		eecs = 2;
-		eesk = 3;
-		eedi = 5;
-
-		ret = 1;
-	} else
-		printk("BFL_ENETADM not set in boardflags. Use force=1 to ignore.\n");
-		
-	if (eecs)
-		eecs = (1 << eecs);
-	if (eesk)
-		eesk = (1 << eesk);
-	if (eedi)
-		eedi = (1 << eedi);
-	if (eerc)
-		eerc = (1 << eerc);
-#else
-	ret = 1;
-#endif
-
-	return ret;
-}
-
-static int __init adm_init()
-{
-	switch_config cfg[] = {
-		{"registers", handle_registers, NULL},
-		{"counters", handle_counters, NULL},
-		{"reset", NULL, handle_reset},
-		{"enable_vlan", handle_vlan_enable_read, handle_vlan_enable_write},
-		{NULL, NULL, NULL}
-	};
-	switch_config port[] = {
-		{"enable", handle_port_enable_read, handle_port_enable_write},
-		{"media", handle_port_media_read, handle_port_media_write},
-		{NULL, NULL, NULL}
-	};
-	switch_config vlan[] = {
-		{"ports", handle_vlan_port_read, handle_vlan_port_write},
-		{NULL, NULL, NULL}
-	};
-	switch_driver driver = {
-		name: DRIVER_NAME,
-		version: DRIVER_VERSION,
-		interface: "eth0",
-		ports: 6,
-		cpuport: 5,
-		vlans: 16,
-		driver_handlers: cfg,
-		port_handlers: port,
-		vlan_handlers: vlan,
-	};
-
-	if (!detect_adm())
-		return -ENODEV;
-
-	return switch_register_driver(&driver);
-}
-
-static void __exit adm_exit()
-{
-	switch_unregister_driver(DRIVER_NAME);
-}
-
-
-module_init(adm_init);
-module_exit(adm_exit);
diff --git a/openwrt/target/linux/package/switch/src/switch-core.c b/openwrt/target/linux/package/switch/src/switch-core.c
deleted file mode 100644
index 6b59b9ba24..0000000000
--- a/openwrt/target/linux/package/switch/src/switch-core.c
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * switch-core.c
- *
- * Copyright (C) 2005 Felix Fietkau <openwrt@nbd.name>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * $Id: $
- *
- * Basic doc of driver's /proc interface:
- * /proc/switch/<interface>/
- *   registers:              read-only
- *   counters:               read-only
- *   reset:                  write causes hardware reset
- *   enable_vlan:            "0", "1"
- *   port/<port-number>/
- *     enabled:              "0", "1"
- *     media:                "AUTO", "100FD", "100HD", "10FD", "10HD"
- *   vlan/<port-number>/
- *     ports: same syntax as for nvram's vlan*ports (eg. "1 2 3 4 5*")
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <linux/proc_fs.h>
-#include <linux/list.h>
-
-#include "switch-core.h"
-
-static int drv_num = 0;
-static struct proc_dir_entry *switch_root;
-switch_driver drivers;
-
-typedef struct {
-	struct list_head list;
-	struct proc_dir_entry *parent;
-	int nr;
-	void *driver;
-	switch_config handler;
-} switch_proc_handler;
-
-typedef struct {
-	struct proc_dir_entry *driver_dir, *port_dir, *vlan_dir;
-	struct proc_dir_entry **ports, **vlans;
-	switch_proc_handler data;
-	int nr;
-} switch_priv;
-
-static ssize_t switch_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos);
-static ssize_t switch_proc_write(struct file *file, const char *buf, size_t count, void *data);
-
-static struct file_operations switch_proc_fops = {
-	read: switch_proc_read,
-	write: switch_proc_write
-};
-
-static ssize_t switch_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos)
-{
-#ifdef LINUX_2_4
-	struct inode *inode = file->f_dentry->d_inode;
-	struct proc_dir_entry *dent = inode->u.generic_ip;
-#else
-	struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
-#endif
-	char *page;
-	int len = 0;
-	
-	if ((page = kmalloc(SWITCH_MAX_BUFSZ, GFP_KERNEL)) == NULL)
-		return -ENOBUFS;
-	
-	if (dent->data != NULL) {
-		switch_proc_handler *handler = (switch_proc_handler *) dent->data;
-		if (handler->handler.read != NULL)
-			len += handler->handler.read(handler->driver, page + len, handler->nr);
-	}
-	len += 1;
-
-	if (*ppos < len) {
-		len = min_t(int, len - *ppos, count);
-		if (copy_to_user(buf, (page + *ppos), len)) {
-			kfree(page);
-			return -EFAULT;
-		}
-		*ppos += len;
-	} else {
-		len = 0;
-	}
-
-	return len;
-}
-
-
-static ssize_t switch_proc_write(struct file *file, const char *buf, size_t count, void *data)
-{
-#ifdef LINUX_2_4
-	struct inode *inode = file->f_dentry->d_inode;
-	struct proc_dir_entry *dent = inode->u.generic_ip;
-#else
-	struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
-#endif
-	char *page;
-	int ret = -EINVAL;
-
-	if ((page = kmalloc(count + 1, GFP_KERNEL)) == NULL)
-		return -ENOBUFS;
-
-	if (copy_from_user(page, buf, count)) {
-		kfree(page);
-		return -EINVAL;
-	}
-	page[count] = 0;
-	
-	if (dent->data != NULL) {
-		switch_proc_handler *handler = (switch_proc_handler *) dent->data;
-		if (handler->handler.write != NULL) {
-			if ((ret = handler->handler.write(handler->driver, page, handler->nr)) >= 0)
-				ret = count;
-		}
-	}
-
-	kfree(page);
-	return ret;
-}
-
-static int handle_driver_name(void *driver, char *buf, int nr)
-{
-	char *name = ((switch_driver *) driver)->name;
-	return sprintf(buf, "%s\n", name);
-}
-
-static int handle_driver_version(void *driver, char *buf, int nr)
-{
-	char *version = ((switch_driver *) driver)->version;
-	strcpy(buf, version);
-	return sprintf(buf, "%s\n", version);
-}
-
-static void add_handler(switch_driver *driver, switch_config *handler, struct proc_dir_entry *parent, int nr)
-{
-	switch_priv *priv = (switch_priv *) driver->data;
-	struct proc_dir_entry *p;
-	int mode;
-
-	switch_proc_handler *tmp;
-	tmp = (switch_proc_handler *) kmalloc(sizeof(switch_proc_handler), GFP_KERNEL);
-	INIT_LIST_HEAD(&tmp->list);
-	tmp->parent = parent;
-	tmp->nr = nr;
-	tmp->driver = driver;
-	memcpy(&tmp->handler, handler, sizeof(switch_config));
-	list_add(&tmp->list, &priv->data.list);
-	
-	mode = 0;
-	if (handler->read != NULL) mode |= S_IRUSR;
-	if (handler->write != NULL) mode |= S_IWUSR;
-	
-	if ((p = create_proc_entry(handler->name, mode, parent)) != NULL) {
-		p->data = (void *) tmp;
-		p->proc_fops = &switch_proc_fops;
-	}
-}
-
-static inline void add_handlers(switch_driver *driver, switch_config *handlers, struct proc_dir_entry *parent, int nr)
-{
-	int i;
-	
-	for (i = 0; handlers[i].name != NULL; i++) {
-		add_handler(driver, &(handlers[i]), parent, nr);
-	}
-}		
-
-static void remove_handlers(switch_priv *priv)
-{
-	struct list_head *pos, *q;
-	switch_proc_handler *tmp;
-
-	list_for_each_safe(pos, q, &priv->data.list) {
-		tmp = list_entry(pos, switch_proc_handler, list);
-		list_del(pos);
-		remove_proc_entry(tmp->handler.name, tmp->parent);
-		kfree(tmp);
-	}
-}
-
-
-static void do_unregister(switch_driver *driver)
-{
-	char buf[4];
-	int i;
-	switch_priv *priv = (switch_priv *) driver->data;
-
-	remove_handlers(priv);
-	
-	for(i = 0; priv->ports[i] != NULL; i++) {
-		sprintf(buf, "%d", i);
-		remove_proc_entry(buf, priv->port_dir);
-	}
-	kfree(priv->ports);
-	remove_proc_entry("port", priv->driver_dir);
-
-	for(i = 0; priv->vlans[i] != NULL; i++) {
-		sprintf(buf, "%d", i);
-		remove_proc_entry(buf, priv->vlan_dir);
-	}
-	kfree(priv->vlans);
-	remove_proc_entry("vlan", priv->driver_dir);
-
-	remove_proc_entry(driver->interface, switch_root);
-			
-	if (priv->nr == (drv_num - 1))
-		drv_num--;
-
-	kfree(priv);
-}
-
-switch_config global_driver_handlers[] = {
-	{"driver", handle_driver_name, NULL},
-	{"version", handle_driver_version, NULL},
-	{NULL, NULL, NULL}
-};
-
-static int do_register(switch_driver *driver)
-{
-	switch_priv *priv;
-	int i;
-	char buf[4];
-	
-	if ((priv = kmalloc(sizeof(switch_priv), GFP_KERNEL)) == NULL)
-		return -ENOBUFS;
-	driver->data = (void *) priv;
-
-	INIT_LIST_HEAD(&priv->data.list);
-	
-	priv->nr = drv_num++;
-	priv->driver_dir = proc_mkdir(driver->interface, switch_root);
-	if (driver->driver_handlers != NULL) {
-		add_handlers(driver, driver->driver_handlers, priv->driver_dir, 0);
-		add_handlers(driver, global_driver_handlers, priv->driver_dir, 0);
-	}
-	
-	priv->port_dir = proc_mkdir("port", priv->driver_dir);
-	priv->ports = kmalloc((driver->ports + 1) * sizeof(struct proc_dir_entry *), GFP_KERNEL);
-	for (i = 0; i < driver->ports; i++) {
-		sprintf(buf, "%d", i);
-		priv->ports[i] = proc_mkdir(buf, priv->port_dir);
-		if (driver->port_handlers != NULL)
-			add_handlers(driver, driver->port_handlers, priv->ports[i], i);
-	}
-	priv->ports[i] = NULL;
-	
-	priv->vlan_dir = proc_mkdir("vlan", priv->driver_dir);
-	priv->vlans = kmalloc((driver->vlans + 1) * sizeof(struct proc_dir_entry *), GFP_KERNEL);
-	for (i = 0; i < driver->vlans; i++) {
-		sprintf(buf, "%d", i);
-		priv->vlans[i] = proc_mkdir(buf, priv->vlan_dir);
-		if (driver->vlan_handlers != NULL)
-			add_handlers(driver, driver->vlan_handlers, priv->vlans[i], i);
-	}
-	priv->vlans[i] = NULL;
-	
-
-	return 0;
-}
-
-static inline int isspace(char c) {
-	switch(c) {
-		case ' ':
-		case 0x09:
-		case 0x0a:
-		case 0x0d:
-			return 1;
-		default:
-			return 0;
-	}
-}
-
-#define toupper(c) (islower(c) ? ((c) ^ 0x20) : (c))
-#define islower(c) (((unsigned char)((c) - 'a')) < 26)
-														 
-int switch_parse_media(char *buf)
-{
-	char *str = buf;
-	while (*buf != 0) {
-		*buf = toupper(*buf);
-		buf++;
-	}
-
-	if (strncmp(str, "AUTO", 4) == 0)
-		return SWITCH_MEDIA_AUTO;
-	else if (strncmp(str, "100FD", 5) == 0)
-		return SWITCH_MEDIA_100 | SWITCH_MEDIA_FD;
-	else if (strncmp(str, "100HD", 5) == 0)
-		return SWITCH_MEDIA_100;
-	else if (strncmp(str, "10FD", 4) == 0)
-		return SWITCH_MEDIA_FD;
-	else if (strncmp(str, "10HD", 4) == 0)
-		return 0;
-	else return -1;
-}
-
-int switch_print_media(char *buf, int media)
-{
-	int len = 0;
-
-	if (media & SWITCH_MEDIA_AUTO)
-		len = sprintf(buf, "Auto");
-	else if (media == (SWITCH_MEDIA_100 | SWITCH_MEDIA_FD))
-		len = sprintf(buf, "100FD");
-	else if (media == SWITCH_MEDIA_100)
-		len = sprintf(buf,  "100HD");
-	else if (media == SWITCH_MEDIA_FD)
-		len = sprintf(buf,  "10FD");
-	else if (media == 0)
-		len = sprintf(buf,  "10HD");
-	else
-		len = sprintf(buf, "Invalid");
-
-	return len;
-}
-
-switch_vlan_config *switch_parse_vlan(switch_driver *driver, char *buf)
-{
-	switch_vlan_config *c;
-	int j, u, p, s;
-	
-	c = kmalloc(sizeof(switch_vlan_config), GFP_KERNEL);
-	memset(c, 0, sizeof(switch_vlan_config));
-
-	while (isspace(*buf)) buf++;
-	j = 0;
-	while (*buf >= '0' && *buf <= '9') {
-		j *= 10;
-		j += *buf++ - '0';
-
-		u = ((j == driver->cpuport) ? 0 : 1);
-		p = 0;
-		s = !(*buf >= '0' && *buf <= '9');
-	
-		if (s) {
-			while (s && !isspace(*buf) && (*buf != 0)) {
-				switch(*buf) {
-					case 'u':
-						u = 1;
-						break;
-					case 't':
-						u = 0;
-						break;
-					case '*':
-						p = 1;
-						break;
-				}
-				buf++;
-			}
-			c->port |= (1 << j);
-			if (u)
-				c->untag |= (1 << j);
-			if (p)
-				c->pvid |= (1 << j);
-
-			j = 0;
-		}
-		
-		while (isspace(*buf)) buf++;
-	}
-	if (*buf != 0) return NULL;
-
-	c->port &= (1 << driver->ports) - 1;
-	c->untag &= (1 << driver->ports) - 1;
-	c->pvid &= (1 << driver->ports) - 1;
-	
-	return c;
-}
-
-
-int switch_register_driver(switch_driver *driver)
-{
-	struct list_head *pos;
-	switch_driver *new;
-	int ret;
-	
-	list_for_each(pos, &drivers.list) {
-		if (strcmp(list_entry(pos, switch_driver, list)->name, driver->name) == 0) {
-			printk("Switch driver '%s' already exists in the kernel\n", driver->name);
-			return -EINVAL;
-		}
-		if (strcmp(list_entry(pos, switch_driver, list)->interface, driver->interface) == 0) {
-			printk("There is already a switch registered on the device '%s'\n", driver->interface);
-			return -EINVAL;
-		}
-	}
-
-	new = kmalloc(sizeof(switch_driver), GFP_KERNEL);
-	memcpy(new, driver, sizeof(switch_driver));
-	new->name = strdup(driver->name);
-	new->interface = strdup(driver->interface);
-	
-	if ((ret = do_register(new)) < 0) {
-		kfree(new->name);
-		kfree(new);
-		return ret;
-	}
-	INIT_LIST_HEAD(&new->list);
-	list_add(&new->list, &drivers.list);
-
-	return 0;
-}
-
-void switch_unregister_driver(char *name) {
-	struct list_head *pos, *q;
-	switch_driver *tmp;
-
-	list_for_each_safe(pos, q, &drivers.list) {
-		tmp = list_entry(pos, switch_driver, list);
-		if (strcmp(tmp->name, name) == 0) {
-			do_unregister(tmp);
-			list_del(pos);
-			kfree(tmp->name);
-			kfree(tmp);
-
-			return;
-		}
-	}
-}
-
-static int __init switch_init()
-{
-	if ((switch_root = proc_mkdir("switch", NULL)) == NULL) {
-		printk("%s: proc_mkdir failed.\n", __FILE__);
-		return -ENODEV;
-	}
-
-	INIT_LIST_HEAD(&drivers.list);
-	
-	return 0;
-}
-
-static void __exit switch_exit()
-{
-	remove_proc_entry("switch", NULL);
-}
-
-MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(switch_register_driver);
-EXPORT_SYMBOL(switch_unregister_driver);
-EXPORT_SYMBOL(switch_parse_vlan);
-EXPORT_SYMBOL(switch_parse_media);
-EXPORT_SYMBOL(switch_print_media);
-
-module_init(switch_init);
-module_exit(switch_exit);
diff --git a/openwrt/target/linux/package/switch/src/switch-core.h b/openwrt/target/linux/package/switch/src/switch-core.h
deleted file mode 100644
index 5292469c01..0000000000
--- a/openwrt/target/linux/package/switch/src/switch-core.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __SWITCH_CORE_H
-#define __SWITCH_CORE_H
-
-#include <linux/version.h>
-#include <linux/list.h>
-#define SWITCH_MAX_BUFSZ	4096
-
-#define SWITCH_MEDIA_AUTO	1
-#define SWITCH_MEDIA_100	2
-#define SWITCH_MEDIA_FD		4
-
-#ifndef KERNEL_VERSION
-#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#define LINUX_2_4
-#endif
-
-typedef int (*switch_handler)(void *driver, char *buf, int nr);
-
-typedef struct {
-	char *name;
-	switch_handler read, write;
-} switch_config;
-
-typedef struct {
-	struct list_head list;
-	char *name;
-	char *version;
-	char *interface;
-	int cpuport;
-	int ports;
-	int vlans;
-	switch_config *driver_handlers, *port_handlers, *vlan_handlers;
-	void *data;
-	void *priv;
-} switch_driver;
-
-typedef struct {
-	u32 port, untag, pvid;
-} switch_vlan_config;
-
-
-extern int switch_register_driver(switch_driver *driver);
-extern void switch_unregister_driver(char *name);
-extern switch_vlan_config *switch_parse_vlan(switch_driver *driver, char *buf);
-extern int switch_parse_media(char *buf);
-extern int switch_print_media(char *buf, int media);
-
-static inline char *strdup(char *str)
-{
-	char *new = kmalloc(strlen(str) + 1, GFP_KERNEL);
-	strcpy(new, str);
-	return new;
-}
-
-
-#endif
diff --git a/openwrt/target/linux/package/switch/src/switch-robo.c b/openwrt/target/linux/package/switch/src/switch-robo.c
deleted file mode 100644
index eb93f4b98d..0000000000
--- a/openwrt/target/linux/package/switch/src/switch-robo.c
+++ /dev/null
@@ -1,480 +0,0 @@
-/*
- * Broadcom BCM5325E/536x switch configuration module
- *
- * Copyright (C) 2005 Felix Fietkau <nbd@nbd.name>
- * Based on 'robocfg' by Oleg I. Vdovikin
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  
- * 02110-1301, USA.
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/if.h>
-#include <linux/if_arp.h>
-#include <linux/sockios.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <asm/uaccess.h>
-
-#include "switch-core.h"
-#include "etc53xx.h"
-
-#define DRIVER_NAME		"bcm53xx"
-#define DRIVER_VERSION	"0.01"
-
-#define ROBO_PHY_ADDR	0x1E	/* robo switch phy address */
-
-/* MII registers */
-#define REG_MII_PAGE	0x10	/* MII Page register */
-#define REG_MII_ADDR	0x11	/* MII Address register */
-#define REG_MII_DATA0	0x18	/* MII Data register 0 */
-
-#define REG_MII_PAGE_ENABLE	1
-#define REG_MII_ADDR_WRITE	1
-#define REG_MII_ADDR_READ	2
-
-/* Private et.o ioctls */
-#define SIOCGETCPHYRD           (SIOCDEVPRIVATE + 9)
-#define SIOCSETCPHYWR           (SIOCDEVPRIVATE + 10)
-
-static char *device;
-static int use_et = 0;
-static int is_5350 = 0;
-static struct ifreq ifr;
-static struct net_device *dev;
-static unsigned char port[6] = { 0, 1, 2, 3, 4, 8 };
-
-static int do_ioctl(int cmd, void *buf)
-{
-	mm_segment_t old_fs = get_fs();
-	int ret;
-
-	if (buf != NULL)
-		ifr.ifr_data = (caddr_t) buf;
-
-	set_fs(KERNEL_DS);
-	ret = dev->do_ioctl(dev, &ifr, cmd);
-	set_fs(old_fs);
-
-	return ret;
-}
-
-static u16 mdio_read(__u16 phy_id, __u8 reg)
-{
-	if (use_et) {
-		int args[2] = { reg };
-		
-		if (phy_id != ROBO_PHY_ADDR) {
-			printk(
-				"Access to real 'phy' registers unavaliable.\n"
-				"Upgrade kernel driver.\n");
-
-			return 0xffff;
-		}
-
-
-		if (do_ioctl(SIOCGETCPHYRD, &args) < 0) {
-			printk("[%s:%d] SIOCGETCPHYRD failed!\n", __FILE__, __LINE__);
-			return 0xffff;
-		}
-	
-		return args[1];
-	} else {
-		struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &ifr.ifr_data;
-		mii->phy_id = phy_id;
-		mii->reg_num = reg;
-
-		if (do_ioctl(SIOCGMIIREG, NULL) < 0) {
-			printk("[%s:%d] SIOCGMIIREG failed!\n", __FILE__, __LINE__);
-
-			return 0xffff;
-		}
-
-		return mii->val_out;
-	}
-}
-
-static void mdio_write(__u16 phy_id, __u8 reg, __u16 val)
-{
-	if (use_et) {
-		int args[2] = { reg, val };
-
-		if (phy_id != ROBO_PHY_ADDR) {
-			printk(
-				"Access to real 'phy' registers unavaliable.\n"
-				"Upgrade kernel driver.\n");
-
-			return;
-		}
-		
-		if (do_ioctl(SIOCSETCPHYWR, args) < 0) {
-			printk("[%s:%d] SIOCGETCPHYWR failed!\n", __FILE__, __LINE__);
-			return;
-		}
-	} else {
-		struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&ifr.ifr_data;
-
-		mii->phy_id = phy_id;
-		mii->reg_num = reg;
-		mii->val_in = val;
-
-		if (do_ioctl(SIOCSMIIREG, NULL) < 0) {
-			printk("[%s:%d] SIOCSMIIREG failed!\n", __FILE__, __LINE__);
-			return;
-		}
-	}
-}
-
-static int robo_reg(__u8 page, __u8 reg, __u8 op)
-{
-	int i = 3;
-	
-	/* set page number */
-	mdio_write(ROBO_PHY_ADDR, REG_MII_PAGE, 
-		(page << 8) | REG_MII_PAGE_ENABLE);
-	
-	/* set register address */
-	mdio_write(ROBO_PHY_ADDR, REG_MII_ADDR, 
-		(reg << 8) | op);
-
-	/* check if operation completed */
-	while (i--) {
-		if ((mdio_read(ROBO_PHY_ADDR, REG_MII_ADDR) & 3) == 0)
-			return 0;
-	}
-
-	printk("[%s:%d] timeout in robo_reg!\n", __FILE__, __LINE__);
-	
-	return 0;
-}
-
-static void robo_read(__u8 page, __u8 reg, __u16 *val, int count)
-{
-	int i;
-	
-	robo_reg(page, reg, REG_MII_ADDR_READ);
-	
-	for (i = 0; i < count; i++)
-		val[i] = mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + i);
-}
-
-static __u16 robo_read16(__u8 page, __u8 reg)
-{
-	robo_reg(page, reg, REG_MII_ADDR_READ);
-	
-	return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0);
-}
-
-static __u32 robo_read32(__u8 page, __u8 reg)
-{
-	robo_reg(page, reg, REG_MII_ADDR_READ);
-	
-	return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0) +
-		(mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16);
-}
-
-static void robo_write16(__u8 page, __u8 reg, __u16 val16)
-{
-	/* write data */
-	mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val16);
-
-	robo_reg(page, reg, REG_MII_ADDR_WRITE);
-}
-
-static void robo_write32(__u8 page, __u8 reg, __u32 val32)
-{
-	/* write data */
-	mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 65535);
-	mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16);
-	
-	robo_reg(page, reg, REG_MII_ADDR_WRITE);
-}
-
-/* checks that attached switch is 5325E/5350 */
-static int robo_vlan5350()
-{
-	/* set vlan access id to 15 and read it back */
-	__u16 val16 = 15;
-	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
-	
-	/* 5365 will refuse this as it does not have this reg */
-	return (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350) == val16);
-}
-
-
-
-static int robo_probe(char *devname)
-{
-	struct ethtool_drvinfo info;
-	int i;
-	__u32 phyid;
-
-	printk("Probing device %s: ", devname);
-	strcpy(ifr.ifr_name, devname);
-
-	if ((dev = dev_get_by_name(devname)) == NULL) {
-		printk("No such device\n");
-		return 1;
-	}
-
-	info.cmd = ETHTOOL_GDRVINFO;
-	if (do_ioctl(SIOCETHTOOL, (void *) &info) < 0) {
-		printk("SIOCETHTOOL: not supported\n");
-		return 1;
-	}
-	
-	/* try access using MII ioctls - get phy address */
-	if (do_ioctl(SIOCGMIIPHY, NULL) < 0) {
-		use_et = 1;
-	} else {
-		/* got phy address check for robo address */
-		struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &ifr.ifr_data;
-		if (mii->phy_id != ROBO_PHY_ADDR) {
-			printk("Invalid phy address (%d)\n", mii->phy_id);
-			return 1;
-		}
-	}
-
-	phyid = mdio_read(ROBO_PHY_ADDR, 0x2) | 
-		(mdio_read(ROBO_PHY_ADDR, 0x3) << 16);
-
-	if (phyid == 0xffffffff || phyid == 0x55210022) {
-		printk("No Robo switch in managed mode found\n");
-		return 1;
-	}
-	
-	is_5350 = robo_vlan5350();
-	
-	printk("found!\n");
-	return 0;
-}
-
-
-static int handle_vlan_port_read(void *driver, char *buf, int nr)
-{
-	__u16 val16;
-	int len = 0;
-	int j;
-
-	val16 = (nr) /* vlan */ | (0 << 12) /* read */ | (1 << 13) /* enable */;
-	
-	if (is_5350) {
-		u32 val32;
-		robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
-		/* actual read */
-		val32 = robo_read32(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
-		if ((val32 & (1 << 20)) /* valid */) {
-			for (j = 0; j < 6; j++) {
-				if (val32 & (1 << j)) {
-					len += sprintf(buf + len, "%d", j);
-					if (val32 & (1 << (j + 6))) {
-						if (j == 5) buf[len++] = 'u';
-					} else {
-						buf[len++] = 't';
-						if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
-							buf[len++] = '*';
-					}
-					buf[len++] = '\t';
-				}
-			}
-			len += sprintf(buf + len, "\n");
-		}
-	} else { 
-		robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
-		/* actual read */
-		val16 = robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
-		if ((val16 & (1 << 14)) /* valid */) {
-			for (j = 0; j < 6; j++) {
-				if (val16 & (1 << j)) {
-					len += sprintf(buf + len, "%d", j);
-					if (val16 & (1 << (j + 7))) {
-						if (j == 5) buf[len++] = 'u';
-					} else {
-						buf[len++] = 't';
-						if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
-							buf[len++] = '*';
-					}
-					buf[len++] = '\t';
-				}
-			}
-			len += sprintf(buf + len, "\n");
-		}
-	}
-
-	buf[len] = '\0';
-
-	return len;
-}
-
-static int handle_vlan_port_write(void *driver, char *buf, int nr)
-{
-	switch_driver *d = (switch_driver *) driver;
-	switch_vlan_config *c = switch_parse_vlan(d, buf);
-	int j;
-	__u16 val16;
-	
-	if (c == NULL)
-		return -EINVAL;
-
-	for (j = 0; j < d->ports; j++) {
-		if ((c->untag | c->pvid) & (1 << j))
-			/* change default vlan tag */
-			robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), nr);
-	}
-
-	/* write config now */
-	val16 = (nr) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
-	if (is_5350) {
-		robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350,
-			(1 << 20) /* valid */ | (c->untag << 6) | c->port);
-		robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
-	} else {
-		robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE,
-			(1 << 14)  /* valid */ | (c->untag << 7) | c->port);
-		robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
-	}
-
-	return 0;
-}
-
-#define set_switch(state) \
-	robo_write16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE, (robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & ~2) | (state ? 2 : 0));
-
-static int handle_enable_read(void *driver, char *buf, int nr)
-{
-	return sprintf(buf, "%d\n", (((robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & 2) == 2) ? 1 : 0));
-}
-
-static int handle_enable_write(void *driver, char *buf, int nr)
-{
-	set_switch(buf[0] == '1');
-
-	return 0;
-}
-
-static int handle_enable_vlan_read(void *driver, char *buf, int nr)
-{
-	return sprintf(buf, "%d\n", (((robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0) & (1 << 7)) == (1 << 7)) ? 1 : 0));
-}
-
-static int handle_enable_vlan_write(void *driver, char *buf, int nr)
-{
-	int disable = ((buf[0] != '1') ? 1 : 0);
-	
-	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 :
-		(1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */);
-	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 :
-		(1 << 1) | (1 << 2) | (1 << 3) /* RSV multicast */);
-	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 :
-		(1 << 6) /* drop invalid VID frames */);
-	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 :
-		(1 << 3) /* drop miss V table frames */);
-
-	return 0;
-}
-
-static int handle_reset(void *driver, char *buf, int nr)
-{
-	switch_driver *d = (switch_driver *) driver;
-	switch_vlan_config *c = switch_parse_vlan(d, buf);
-	int j;
-	__u16 val16;
-	
-	if (c == NULL)
-		return -EINVAL;
-
-	/* disable switching */
-	set_switch(0);
-
-	/* reset vlans */
-	for (j = 0; j <= (is_5350 ? VLAN_ID_MAX5350 : VLAN_ID_MAX); j++) {
-		/* write config now */
-		val16 = (j) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
-		if (is_5350)
-			robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350, 0);
-		else
-			robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, 0);
-		robo_write16(ROBO_VLAN_PAGE, (is_5350 ? ROBO_VLAN_TABLE_ACCESS_5350 : ROBO_VLAN_TABLE_ACCESS), val16);
-	}
-
-	/* reset ports to a known good state */
-	for (j = 0; j < d->ports; j++) {
-		robo_write16(ROBO_CTRL_PAGE, port[j], 0x0000);
-		robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), 0);
-	}
-
-	/* enable switching */
-	set_switch(1);
-
-	/* enable vlans */
-	handle_enable_vlan_write(driver, "1", 0);
-
-	return 0;
-}
-
-static int __init robo_init()
-{
-	int notfound = 1;
-
-	device = strdup("ethX");
-	for (device[3] = '0'; (device[3] <= '3') && notfound; device[3]++) {
-		notfound = robo_probe(device);
-	}
-	device[3]--;
-	
-	if (notfound) {
-		kfree(device);
-		return -ENODEV;
-	} else {
-		switch_config cfg[] = {
-			{"enable", handle_enable_read, handle_enable_write},
-			{"enable_vlan", handle_enable_vlan_read, handle_enable_vlan_write},
-			{"reset", NULL, handle_reset},
-			{NULL, NULL, NULL}
-		};
-		switch_config vlan[] = {
-			{"ports", handle_vlan_port_read, handle_vlan_port_write},
-			{NULL, NULL, NULL}
-		};
-		switch_driver driver = {
-			name: DRIVER_NAME,
-			version: DRIVER_VERSION,
-			interface: device,
-			cpuport: 5,
-			ports: 6,
-			vlans: 16,
-			driver_handlers: cfg,
-			port_handlers: NULL,
-			vlan_handlers: vlan,
-		};
-
-		return switch_register_driver(&driver);
-	}
-}
-
-static void __exit robo_exit()
-{
-	switch_unregister_driver(DRIVER_NAME);
-	kfree(device);
-}
-
-
-MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
-MODULE_LICENSE("GPL");
-
-module_init(robo_init);
-module_exit(robo_exit);
diff --git a/openwrt/target/linux/package/ueagle-atm/Config.in b/openwrt/target/linux/package/ueagle-atm/Config.in
deleted file mode 100644
index 17b619cef8..0000000000
--- a/openwrt/target/linux/package/ueagle-atm/Config.in
+++ /dev/null
@@ -1,10 +0,0 @@
-config BR2_PACKAGE_KMOD_UEAGLE_ATM
-	prompt "kmod-ueagle-atm.................... Kernel driver for Eagle 8051 based USB ADSL modems"
-	tristate
-	depends BR2_LINUX_2_6_BRCM
-	default m if CONFIG_DEVEL
-	help
-	  Kernel driver for Eagle 8051 USB ADSL modems
-	  
-	  http://www.eagle-usb.org
-	  
diff --git a/openwrt/target/linux/package/ueagle-atm/Makefile b/openwrt/target/linux/package/ueagle-atm/Makefile
deleted file mode 100644
index 3872727f59..0000000000
--- a/openwrt/target/linux/package/ueagle-atm/Makefile
+++ /dev/null
@@ -1,42 +0,0 @@
-# $Id: Makefile 2767 2005-12-25 02:10:14Z wbx $
-
-include $(TOPDIR)/rules.mk
-include ../../rules.mk
-
-PKG_NAME:=ueagle-atm
-PKG_VERSION:=1.0d1
-PKG_RELEASE:=1
-PKG_MD5SUM:=5da1fceb15168f4c7ad407a3e38ddecb
-
-PKG_SOURCE_URL:=http://castet.matthieu.free.fr/eagle/release/
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_UEAGLE_ATM,kmod-ueagle-atm,$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel-$(LINUX_VERSION)-$(BOARD) ($(LINUX_RELEASE))))
-
-$(PKG_BUILD_DIR)/.configured:
-	touch $@
-
-$(PKG_BUILD_DIR)/.built:
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		TARGET="$(HAL_TARGET)" \
-		KERNELDIR="$(LINUX_DIR)" \
-		all
-	touch $@
-
-$(IPKG_KMOD_UEAGLE_ATM):
-	install -m0755 -d $(IDIR_KMOD_UEAGLE_ATM)/lib/modules/$(LINUX_VERSION) $(IDIR_KMOD_UEAGLE_ATM)/etc/modules.d
-	install -m0644 ./files/$(PKG_NAME).modules $(IDIR_KMOD_UEAGLE_ATM)/etc/modules.d/10-$(PKG_NAME)
-	$(CP)	$(PKG_BUILD_DIR)/driver/ueagle-atm.$(LINUX_KMOD_SUFFIX) \
-		$(PKG_BUILD_DIR)/usbatm_iso/usbatm.$(LINUX_KMOD_SUFFIX) \
-		$(IDIR_KMOD_UEAGLE_ATM)/lib/modules/$(LINUX_VERSION)/
-	$(RSTRIP_KMOD) $(IDIR_KMOD_UEAGLE_ATM)
-	$(IPKG_BUILD) $(IDIR_KMOD_UEAGLE_ATM) $(PACKAGE_DIR)
-
diff --git a/openwrt/target/linux/package/ueagle-atm/files/ueagle-atm.modules b/openwrt/target/linux/package/ueagle-atm/files/ueagle-atm.modules
deleted file mode 100644
index 6343f50e73..0000000000
--- a/openwrt/target/linux/package/ueagle-atm/files/ueagle-atm.modules
+++ /dev/null
@@ -1,2 +0,0 @@
-usbatm
-ueagle-atm
diff --git a/openwrt/target/linux/package/ueagle-atm/ipkg/kmod-ueagle-atm.control b/openwrt/target/linux/package/ueagle-atm/ipkg/kmod-ueagle-atm.control
deleted file mode 100644
index 9659aa0b7d..0000000000
--- a/openwrt/target/linux/package/ueagle-atm/ipkg/kmod-ueagle-atm.control
+++ /dev/null
@@ -1,5 +0,0 @@
-Package: kmod-ueagle-atm
-Priority: optional
-Section: sys
-Depends: kmod-usb-core
-Description: Kernel driver for Eagle 8051 based USB ADSL modems
diff --git a/openwrt/target/linux/package/ueagle-atm/patches/100-compile_fix.patch b/openwrt/target/linux/package/ueagle-atm/patches/100-compile_fix.patch
deleted file mode 100644
index b8e70a2ff3..0000000000
--- a/openwrt/target/linux/package/ueagle-atm/patches/100-compile_fix.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-diff -Nur ueagle-atm-1.0d1/driver/ueagle.c ueagle-atm-1.0d1.patched/driver/ueagle.c
---- ueagle-atm-1.0d1/driver/ueagle.c	2005-11-19 18:36:04.000000000 +0100
-+++ ueagle-atm-1.0d1.patched/driver/ueagle.c	2006-03-29 02:03:43.000000000 +0200
-@@ -1652,7 +1652,6 @@
-  * USB driver descriptor
-  */
- static struct usb_driver uea_driver = {
--	.owner = THIS_MODULE,
- 	.name = "ueagle-atm",
- 	.id_table = uea_ids,
- 	.probe = uea_probe,
diff --git a/openwrt/target/linux/package/wlcompat/Config.in b/openwrt/target/linux/package/wlcompat/Config.in
deleted file mode 100644
index 1e5f5e79e0..0000000000
--- a/openwrt/target/linux/package/wlcompat/Config.in
+++ /dev/null
@@ -1,17 +0,0 @@
-config BR2_PACKAGE_KMOD_WLCOMPAT
-	prompt "kmod-wlcompat..................... Wrapper providing Wireless Extensions for Broadcom wl module"
-	tristate
-	default y
-	depends BR2_PACKAGE_KMOD_BRCM_WL || BR2_PACKAGE_KMOD_BRCM_WL2
-	help
-	  A wrapper module, that provides Wireless Extension support for the
-	  proprietary Broadcom wl module.
-
-config BR2_PACKAGE_KMOD_WLCOMPAT_DEBUG
-	prompt "kmod-wlcompat-debug............... Wrapper providing Wireless Extensions for Broadcom wl module (debug)"
-	tristate
-	default m
-	depends BR2_PACKAGE_KMOD_BRCM_WL || BR2_PACKAGE_KMOD_BRCM_WL2
-	help
-	  A wrapper module, that provides Wireless Extension support for the
-	  proprietary Broadcom wl module. (debug version)
diff --git a/openwrt/target/linux/package/wlcompat/Makefile b/openwrt/target/linux/package/wlcompat/Makefile
deleted file mode 100644
index cdc02ea229..0000000000
--- a/openwrt/target/linux/package/wlcompat/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-# $Id$
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME := kmod-wlcompat
-PKG_RELEASE := 3
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_WLCOMPAT,$(PKG_NAME),$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-$(eval $(call PKG_template,KMOD_WLCOMPAT_DEBUG,$(PKG_NAME)-debug,$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-WLCOMPAT_FLAGS:=$(TARGET_CFLAGS) -D__KERNEL__ -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \
-		-mno-abicalls -fno-pic -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 \
-		-Wa,-mips32 -Wa,--trap -DMODULE -mlong-calls -fno-common -I. -I linux-2.4 -funsigned-char -nostdinc \
-		-iwithprefix include -I$(LINUX_DIR)/include -I$(LINUX_DIR)/include/asm/gcc -I$(STAGING_DIR)/usr/include -c
-
-$(PKG_BUILD_DIR)/.prepared:
-	mkdir -p $(PKG_BUILD_DIR)
-	touch $@
-
-$(PKG_BUILD_DIR)/.built: $(PKG_BUILD_DIR)/wlcompat.o $(PKG_BUILD_DIR)/wlcompat-debug.o
-	touch $@
-	
-$(PKG_BUILD_DIR)/wlcompat.o: $(PKG_BUILD_DIR)/.prepared
-	$(TARGET_CC) $(WLCOMPAT_FLAGS) -o $@ wlcompat.c
-
-$(PKG_BUILD_DIR)/wlcompat-debug.o: $(PKG_BUILD_DIR)/.prepared
-	$(TARGET_CC) -DDEBUG $(WLCOMPAT_FLAGS) -o $@ wlcompat.c
-
-$(IPKG_KMOD_WLCOMPAT): $(PKG_BUILD_DIR)/wlcompat.o
-	mkdir -p $(IDIR_KMOD_WLCOMPAT)/etc/modules.d
-	echo "wlcompat" > $(IDIR_KMOD_WLCOMPAT)/etc/modules.d/30-wlcompat
-	mkdir -p $(IDIR_KMOD_WLCOMPAT)/lib/modules/$(LINUX_VERSION)
-	$(CP) $(PKG_BUILD_DIR)/wlcompat.o $(IDIR_KMOD_WLCOMPAT)/lib/modules/$(LINUX_VERSION)/
-	$(IPKG_BUILD) $(IDIR_KMOD_WLCOMPAT) $(PACKAGE_DIR)
-
-$(IPKG_KMOD_WLCOMPAT_DEBUG): $(PKG_BUILD_DIR)/wlcompat-debug.o
-	mkdir -p $(IDIR_KMOD_WLCOMPAT_DEBUG)/lib/modules/$(LINUX_VERSION)
-	$(CP) $(PKG_BUILD_DIR)/wlcompat-debug.o $(IDIR_KMOD_WLCOMPAT_DEBUG)/lib/modules/$(LINUX_VERSION)/
-	$(IPKG_BUILD) $(IDIR_KMOD_WLCOMPAT_DEBUG) $(PACKAGE_DIR)
-
diff --git a/openwrt/target/linux/package/wlcompat/ipkg/kmod-wlcompat-debug.control b/openwrt/target/linux/package/wlcompat/ipkg/kmod-wlcompat-debug.control
deleted file mode 100644
index 583b05b926..0000000000
--- a/openwrt/target/linux/package/wlcompat/ipkg/kmod-wlcompat-debug.control
+++ /dev/null
@@ -1,5 +0,0 @@
-Package: kmod-wlcompat-debug
-Priority: optional
-Section: sys
-Depends: kmod-brcm-wl
-Description: Compatibility module for using the Wireless Extension with broadcom's wl (debug)
diff --git a/openwrt/target/linux/package/wlcompat/ipkg/kmod-wlcompat.control b/openwrt/target/linux/package/wlcompat/ipkg/kmod-wlcompat.control
deleted file mode 100644
index b9857172f0..0000000000
--- a/openwrt/target/linux/package/wlcompat/ipkg/kmod-wlcompat.control
+++ /dev/null
@@ -1,5 +0,0 @@
-Package: kmod-wlcompat
-Priority: optional
-Section: sys
-Depends: kmod-brcm-wl
-Description: Compatibility module for using the Wireless Extension with broadcom's wl
diff --git a/openwrt/target/linux/package/wlcompat/wlcompat.c b/openwrt/target/linux/package/wlcompat/wlcompat.c
deleted file mode 100644
index 1540a21167..0000000000
--- a/openwrt/target/linux/package/wlcompat/wlcompat.c
+++ /dev/null
@@ -1,1021 +0,0 @@
-/*
- * wlcompat.c
- *
- * Copyright (C) 2005 Mike Baker,
- *                    Felix Fietkau <openwrt@nbd.name>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * $Id$
- */
-
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/if_arp.h>
-#include <asm/uaccess.h>
-#include <linux/wireless.h>
-
-#include <net/iw_handler.h>
-#include <wlioctl.h>
-
-static struct net_device *dev;
-static unsigned short bss_force;
-static struct iw_statistics wstats;
-char buf[WLC_IOCTL_MAXLEN];
-
-/* The frequency of each channel in MHz */
-const long channel_frequency[] = {
-	2412, 2417, 2422, 2427, 2432, 2437, 2442,
-	2447, 2452, 2457, 2462, 2467, 2472, 2484
-};
-#define NUM_CHANNELS ( sizeof(channel_frequency) / sizeof(channel_frequency[0]) )
-
-typedef struct internal_wsec_key {
-	uint8 index;		// 0x00
-	uint8 unknown_1;	// 0x01
-	uint8 type;		// 0x02
-	uint8 unknown_2[7];	// 0x03
-	uint8 len;		// 0x0a
-	uint8 pad[3];
-	char data[32];		// 0x0e
-} wkey;
-
-
-static int wlcompat_private_ioctl(struct net_device *dev,
-			 struct iw_request_info *info,
-			 union iwreq_data *wrqu,
-			 char *extra);
-#ifdef DEBUG
-void print_buffer(int len, unsigned char *buf);
-#endif
-
-static int wl_ioctl(struct net_device *dev, int cmd, void *buf, int len)
-{
-	mm_segment_t old_fs = get_fs();
-	struct ifreq ifr;
-	int ret;
-	wl_ioctl_t ioc;
-	ioc.cmd = cmd;
-	ioc.buf = buf;
-	ioc.len = len;
-	strncpy(ifr.ifr_name, dev->name, IFNAMSIZ);
-	ifr.ifr_data = (caddr_t) &ioc;
-	set_fs(KERNEL_DS);
-	ret = dev->do_ioctl(dev,&ifr,SIOCDEVPRIVATE);
-	set_fs (old_fs);
-	return ret;
-}
-
-static int wl_set_val(struct net_device *dev, char *var, void *val, int len)
-{
-	char buf[128];
-	int buf_len;
-	int ret;
-
-	/* check for overflow */
-	if ((buf_len = strlen(var)) + 1 + len > sizeof(buf))
-		return -1;
-	
-	strcpy(buf, var);
-	buf_len += 1;
-
-	/* append int value onto the end of the name string */
-	memcpy(&(buf[buf_len]), val, len);
-	buf_len += len;
-
-	ret = wl_ioctl(dev, WLC_SET_VAR, buf, buf_len);
-	return ret;
-}
-
-static int wl_get_val(struct net_device *dev, char *var, void *val, int len)
-{
-	char buf[128];
-	int buf_len;
-	int ret;
-
-	/* check for overflow */
-	if ((buf_len = strlen(var)) + 1 > sizeof(buf) || len > sizeof(buf))
-		return -1;
-	
-	strcpy(buf, var);
-	if (ret = wl_ioctl(dev, WLC_GET_VAR, buf, buf_len + len))
-		return ret;
-
-	memcpy(val, buf, len);
-	return 0;
-}
-
-int get_primary_key(struct net_device *dev)
-{
-	int key, val;
-	
-	for (key = val = 0; (key < 4) && (val == 0); key++) {
-		val = key;
-		if (wl_ioctl(dev, WLC_GET_KEY_PRIMARY, &val, sizeof(val)) < 0)
-			return -EINVAL;
-	}
-	return key;
-}
-
-
-static int wlcompat_ioctl_getiwrange(struct net_device *dev,
-				    char *extra)
-{
-	int i, k;
-	struct iw_range *range;
-
-	range = (struct iw_range *) extra;
-	bzero(extra, sizeof(struct iw_range));
-
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = WIRELESS_EXT;
-	
-	range->min_nwid = range->max_nwid = 0;
-	
-	range->num_channels = NUM_CHANNELS;
-	k = 0;
-	for (i = 0; i < NUM_CHANNELS; i++) {
-		range->freq[k].i = i + 1;
-		range->freq[k].m = channel_frequency[i] * 100000;
-		range->freq[k].e = 1;
-		k++;
-		if (k >= IW_MAX_FREQUENCIES)
-			break;
-	}
-	range->num_frequency = k;
-	range->sensitivity = 3;
-
-	/* nbd: don't know what this means, but other drivers set it this way */
-	range->pmp_flags = IW_POWER_PERIOD;
-	range->pmt_flags = IW_POWER_TIMEOUT;
-	range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;
-
-	range->min_pmp = 0;
-	range->max_pmp = 65535000;
-	range->min_pmt = 0;
-	range->max_pmt = 65535 * 1000;
-
-	range->max_qual.qual = 0;
-	range->max_qual.level = 0;
-	range->max_qual.noise = 0;
-	
-	range->min_rts = 0;
-	if (wl_ioctl(dev, WLC_GET_RTS, &range->max_rts, sizeof(int)) < 0)
-		range->max_rts = 2347;
-
-	range->min_frag = 256;
-	
-	if (wl_ioctl(dev, WLC_GET_FRAG, &range->max_frag, sizeof(int)) < 0)
-		range->max_frag = 2346;
-
-	range->txpower_capa = IW_TXPOW_DBM;
-
-	return 0;
-}
-
-
-static int wlcompat_set_scan(struct net_device *dev,
-			 struct iw_request_info *info,
-			 union iwreq_data *wrqu,
-			 char *extra)
-{
-	int ap = 0, oldap = 0;
-	wl_scan_params_t params;
-
-	memset(&params, 0, sizeof(params));
-
-	/* use defaults (same parameters as wl scan) */
-	memset(&params.bssid, 0xff, sizeof(params.bssid));
-	params.bss_type = DOT11_BSSTYPE_ANY;
-	params.scan_type = -1;
-	params.nprobes = -1;
-	params.active_time = -1;
-	params.passive_time = -1;
-	params.home_time = -1;
-	
-	/* can only scan in STA mode */
-	wl_ioctl(dev, WLC_GET_AP, &oldap, sizeof(oldap));
-	if (oldap > 0)
-		wl_ioctl(dev, WLC_SET_AP, &ap, sizeof(ap));
-	
-	if (wl_ioctl(dev, WLC_SCAN, &params, 64) < 0)
-		return -EINVAL;
-	
-	if (oldap > 0)
-		wl_ioctl(dev, WLC_SET_AP, &oldap, sizeof(oldap));
-
-	return 0;
-}
-
-
-struct iw_statistics *wlcompat_get_wireless_stats(struct net_device *dev)
-{
-	wl_bss_info_t *bss_info = (wl_bss_info_t *) buf;
-	get_pktcnt_t pkt;
-	unsigned int rssi, noise, ap;
-	
-	memset(&wstats, 0, sizeof(wstats));
-	memset(&pkt, 0, sizeof(pkt));
-	memset(buf, 0, sizeof(buf));
-	bss_info->version = 0x2000;
-	wl_ioctl(dev, WLC_GET_BSS_INFO, bss_info, WLC_IOCTL_MAXLEN);
-	wl_ioctl(dev, WLC_GET_PKTCNTS, &pkt, sizeof(pkt));
-
-	rssi = 0;
-	if ((wl_ioctl(dev, WLC_GET_AP, &ap, sizeof(ap)) < 0) || ap) {
-		if (wl_ioctl(dev, WLC_GET_PHY_NOISE, &noise, sizeof(noise)) < 0)
-			noise = 0;
-	} else {
-		// somehow the structure doesn't fit here
-		rssi = buf[82];
-		noise = buf[84];
-	}
-	rssi = (rssi == 0 ? 1 : rssi);
-	wstats.qual.updated = 0x10;
-	if (rssi <= 1) 
-		wstats.qual.updated |= 0x20;
-	if (noise <= 1)
-		wstats.qual.updated |= 0x40;
-
-	if ((wstats.qual.updated & 0x60) == 0x60)
-		return NULL;
-
-	wstats.qual.level = rssi;
-	wstats.qual.noise = noise;
-	wstats.discard.misc = pkt.rx_bad_pkt;
-	wstats.discard.retries = pkt.tx_bad_pkt;
-
-	return &wstats;
-}
-
-static int wlcompat_get_scan(struct net_device *dev,
-			 struct iw_request_info *info,
-			 union iwreq_data *wrqu,
-			 char *extra)
-{
-	wl_scan_results_t *results = (wl_scan_results_t *) buf;
-	wl_bss_info_t *bss_info;
-	char *info_ptr;
-	char *current_ev = extra;
-	char *current_val;
-	char *end_buf = extra + IW_SCAN_MAX_DATA;
-	struct iw_event iwe;
-	int i, j;
-	int rssi, noise;
-	
-	results->buflen = WLC_IOCTL_MAXLEN - sizeof(wl_scan_results_t);
-	
-	if (wl_ioctl(dev, WLC_SCAN_RESULTS, buf, WLC_IOCTL_MAXLEN) < 0)
-		return -EAGAIN;
-	
-	bss_info = &(results->bss_info[0]);
-	info_ptr = (char *) bss_info;
-	for (i = 0; i < results->count; i++) {
-
-		/* send the cell address (must be sent first) */
-		iwe.cmd = SIOCGIWAP;
-		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-		memcpy(&iwe.u.ap_addr.sa_data, &bss_info->BSSID, sizeof(bss_info->BSSID));
-		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
-		
-		/* send the ESSID */
-		iwe.cmd = SIOCGIWESSID;
-		iwe.u.data.length = bss_info->SSID_len;
-		if (iwe.u.data.length > IW_ESSID_MAX_SIZE)
-			iwe.u.data.length = IW_ESSID_MAX_SIZE;
-		iwe.u.data.flags = 1;
-		current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss_info->SSID);
-
-		/* send frequency/channel info */
-		iwe.cmd = SIOCGIWFREQ;
-		iwe.u.freq.e = 0;
-		iwe.u.freq.m = bss_info->channel;
-		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
-
-		/* add quality statistics */
-		iwe.cmd = IWEVQUAL;
-		iwe.u.qual.qual = 0;
-		iwe.u.qual.level = bss_info->RSSI;
-		iwe.u.qual.noise = bss_info->phy_noise;
-		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
-	
-		/* send rate information */
-		iwe.cmd = SIOCGIWRATE;
-		current_val = current_ev + IW_EV_LCP_LEN;
-		iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
-		
-		for(j = 0 ; j < bss_info->rateset.count ; j++) {
-			iwe.u.bitrate.value = ((bss_info->rateset.rates[j] & 0x7f) * 500000);
-			current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN);
-		}
-		if((current_val - current_ev) > IW_EV_LCP_LEN)
-			current_ev = current_val;
-
-		info_ptr += sizeof(wl_bss_info_t);
-		if (bss_info->ie_length % 4)
-			info_ptr += bss_info->ie_length + 4 - (bss_info->ie_length % 4);
-		else
-			info_ptr += bss_info->ie_length;
-		bss_info = (wl_bss_info_t *) info_ptr;
-	}
-	
-	wrqu->data.length = (current_ev - extra);
-	wrqu->data.flags = 0;
-
-	return 0;
-}
-
-static int wlcompat_ioctl(struct net_device *dev,
-			 struct iw_request_info *info,
-			 union iwreq_data *wrqu,
-			 char *extra)
-{
-	switch (info->cmd) {
-		case SIOCGIWNAME:
-			strcpy(wrqu->name, "IEEE 802.11-DS");
-			break;
-		case SIOCGIWFREQ:
-		{
-			channel_info_t ci;
-
-			if (wl_ioctl(dev,WLC_GET_CHANNEL, &ci, sizeof(ci)) < 0)
-				return -EINVAL;
-
-			wrqu->freq.m = ci.target_channel;
-			wrqu->freq.e = 0;
-			break;
-		}
-		case SIOCSIWFREQ:
-		{
-			if (wrqu->freq.m == -1) {
-				wrqu->freq.m = 0;
-				if (wl_ioctl(dev, WLC_SET_CHANNEL, &wrqu->freq.m, sizeof(int)) < 0)
-					return -EINVAL;
-			} else {
-				if (wrqu->freq.e == 1) {
-					int channel = 0;
-					int f = wrqu->freq.m / 100000;
-					while ((channel < NUM_CHANNELS + 1) && (f != channel_frequency[channel]))
-						channel++;
-					
-					if (channel == NUM_CHANNELS) // channel not found
-						return -EINVAL;
-
-					wrqu->freq.e = 0;
-					wrqu->freq.m = channel + 1;
-				}
-				if ((wrqu->freq.e == 0) && (wrqu->freq.m < 1000)) {
-					if (wl_ioctl(dev, WLC_SET_CHANNEL, &wrqu->freq.m, sizeof(int)) < 0)
-						return -EINVAL;
-				} else {
-					return -EINVAL;
-				}
-			}
-			break;
-		}
-		case SIOCSIWAP:
-		{
-			int ap = 0;
-			int infra = 0;
-			rw_reg_t reg;
-
-			memset(&reg, 0, sizeof(reg));
-
-			if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
-				return -EINVAL;
-
-			if (wl_ioctl(dev, WLC_GET_AP, &ap, sizeof(ap)) < 0)
-				return -EINVAL;
-
-			if (wl_ioctl(dev, WLC_GET_INFRA, &infra, sizeof(infra)) < 0)
-				return -EINVAL;
-
-			if (!infra) {
-				wl_ioctl(dev, WLC_SET_BSSID, wrqu->ap_addr.sa_data, 6);
-
-				reg.size = 4;
-				reg.byteoff = 0x184;
-				reg.val = bss_force << 16 | bss_force;
-				wl_ioctl(dev, WLC_W_REG, &reg, sizeof(reg));
-				
-				reg.byteoff = 0x180;
-				wl_ioctl(dev, WLC_R_REG, &reg, sizeof(reg));
-				reg.val = bss_force << 16;
-				wl_ioctl(dev, WLC_W_REG, &reg, sizeof(reg));
-			}
-
-			if (wl_ioctl(dev, ((ap || !infra) ? WLC_SET_BSSID : WLC_REASSOC), wrqu->ap_addr.sa_data, 6) < 0)
-				return -EINVAL;
-
-			break;
-		}
-		case SIOCGIWAP:
-		{
-#ifdef DEBUG
-			rw_reg_t reg;
-			memset(&reg, 0, sizeof(reg));
-
-			reg.size = 4;
-			reg.byteoff = 0x184;
-			wl_ioctl(dev, WLC_R_REG, &reg, sizeof(reg));
-			printk("bss time = 0x%08x", reg.val);
-			
-			reg.byteoff = 0x180;
-			wl_ioctl(dev, WLC_R_REG, &reg, sizeof(reg));
-			printk("%08x\n", reg.val);
-#endif
-			
-			wrqu->ap_addr.sa_family = ARPHRD_ETHER;
-			if (wl_ioctl(dev,WLC_GET_BSSID,wrqu->ap_addr.sa_data,6) < 0)
-				return -EINVAL;
-			break;
-		}
-		case SIOCGIWESSID:
-		{
-			wlc_ssid_t ssid;
-			
-			if (wl_ioctl(dev,WLC_GET_SSID, &ssid, sizeof(wlc_ssid_t)) < 0)
-				return -EINVAL;
-
-			wrqu->essid.flags = wrqu->data.flags = 1;
-			wrqu->essid.length = wrqu->data.length = ssid.SSID_len + 1;
-			memcpy(extra,ssid.SSID,ssid.SSID_len + 1);
-			break;
-		}
-		case SIOCSIWESSID:
-		{
-			wlc_ssid_t ssid;
-			memset(&ssid, 0, sizeof(ssid));
-			ssid.SSID_len = strlen(extra);
-			if (ssid.SSID_len > WLC_ESSID_MAX_SIZE)
-				ssid.SSID_len = WLC_ESSID_MAX_SIZE;
-			memcpy(ssid.SSID, extra, ssid.SSID_len);
-			if (wl_ioctl(dev, WLC_SET_SSID, &ssid, sizeof(ssid)) < 0)
-				return -EINVAL;
-			break;
-		}
-		case SIOCGIWRTS:
-		{
-			if (wl_ioctl(dev,WLC_GET_RTS,&(wrqu->rts.value),sizeof(int)) < 0) 
-				return -EINVAL;
-			break;
-		}
-		case SIOCSIWRTS:
-		{
-			if (wl_ioctl(dev,WLC_SET_RTS,&(wrqu->rts.value),sizeof(int)) < 0) 
-				return -EINVAL;
-			break;
-		}
-		case SIOCGIWFRAG:
-		{
-			if (wl_ioctl(dev,WLC_GET_FRAG,&(wrqu->frag.value),sizeof(int)) < 0)
-				return -EINVAL;
-			break;
-		}
-		case SIOCSIWFRAG:
-		{
-			if (wl_ioctl(dev,WLC_SET_FRAG,&(wrqu->frag.value),sizeof(int)) < 0)
-				return -EINVAL;
-			break;
-		}
-		case SIOCGIWTXPOW:
-		{
-			int radio, override;
-
-			wl_ioctl(dev, WLC_GET_RADIO, &radio, sizeof(int));
-			
-			if (wl_get_val(dev, "qtxpower", &(wrqu->txpower.value), sizeof(int)) < 0)
-				return -EINVAL;
-			
-			override = (wrqu->txpower.value & WL_TXPWR_OVERRIDE) == WL_TXPWR_OVERRIDE;
-			wrqu->txpower.value &= ~WL_TXPWR_OVERRIDE;
-			if (!override && (wrqu->txpower.value > 76))
-				wrqu->txpower.value = 76;
-			wrqu->txpower.value /= 4;
-				
-			wrqu->txpower.fixed = 0;
-			wrqu->txpower.disabled = radio;
-			wrqu->txpower.flags = IW_TXPOW_DBM;
-			break;
-		}
-		case SIOCSIWTXPOW:
-		{
-			/* This is weird: WLC_SET_RADIO with 1 as argument disables the radio */
-			int radio = wrqu->txpower.disabled;
-
-			wl_ioctl(dev, WLC_SET_RADIO, &radio, sizeof(int));
-			
-			if (!wrqu->txpower.disabled && (wrqu->txpower.value > 0)) {
-				int value;
-				
-				if (wl_get_val(dev, "qtxpower", &value, sizeof(int)) < 0)
-					return -EINVAL;
-				
-				value &= WL_TXPWR_OVERRIDE;
-				wrqu->txpower.value *= 4;
-				wrqu->txpower.value |= value;
-				
-				if (wrqu->txpower.flags != IW_TXPOW_DBM)
-					return -EINVAL;
-				
-				if (wrqu->txpower.value > 0)
-					if (wl_set_val(dev, "qtxpower", &(wrqu->txpower.value), sizeof(int)) < 0)
-						return -EINVAL;
-			}
-			break;
-		}
-		case SIOCSIWENCODE:
-		{
-			int val = 0, wep = 1, wrestrict = 1;
-			int index = (wrqu->data.flags & IW_ENCODE_INDEX) - 1;
-
-			if (index < 0)
-				index = get_primary_key(dev);
-			
-			if (wrqu->data.flags & IW_ENCODE_DISABLED) {
-				wep = 0;
-				if (wl_ioctl(dev, WLC_SET_WSEC, &wep, sizeof(val)) < 0)
-					return -EINVAL;
-				return 0;
-			}
-
-			if (wl_ioctl(dev, WLC_SET_WSEC, &wep, sizeof(val)) < 0)
-				return -EINVAL;
-
-			if (wrqu->data.flags & IW_ENCODE_OPEN)
-				wrestrict = 0;
-			
-			if (wrqu->data.pointer && (wrqu->data.length > 0) && (wrqu->data.length <= 16)) {
-				wl_wsec_key_t key;
-				memset(&key, 0, sizeof(key));
-
-				key.flags = WL_PRIMARY_KEY;
-				key.len = wrqu->data.length;
-				key.index = index;
-				memcpy(key.data, wrqu->data.pointer, wrqu->data.length);
-
-				if (wl_ioctl(dev, WLC_SET_KEY, &key, sizeof(key)) < 0)
-					return -EINVAL;
-			}
-
-			if (index >= 0)
-				wl_ioctl(dev, WLC_SET_KEY_PRIMARY, &index, sizeof(index));
-			
-			if (wrestrict >= 0)
-				wl_ioctl(dev, WLC_SET_WEP_RESTRICT, &wrestrict, sizeof(wrestrict));
-
-			break;
-		}
-		case SIOCGIWENCODE:
-		{
-			int val;
-			
-			if (wl_ioctl(dev, WLC_GET_WEP, &val, sizeof(val)) < 0)
-				return -EINVAL;
-			
-
-			if (val > 0) {
-				int key = get_primary_key(dev);
-				
-				wrqu->data.flags = IW_ENCODE_ENABLED;
-				if (key-- > 0) {
-					int *info_addr; 
-					wkey *wep_key;
-					
-					info_addr = (int *) dev->priv;
-					wep_key = (wkey *) ((*info_addr) + 0x2752 + (key * 0x110));
-					
-					wrqu->data.flags |= key + 1;
-					wrqu->data.length = wep_key->len;
-
-					memset(extra, 0, 16);
-					memcpy(extra, wep_key->data, 16);
-				} else {
-					wrqu->data.flags |= IW_ENCODE_NOKEY;
-				}
-			} else {
-				wrqu->data.flags = IW_ENCODE_DISABLED;
-			}
-			
-			break;
-		}
-		case SIOCGIWRANGE:
-		{
-			return wlcompat_ioctl_getiwrange(dev, extra);
-			break;
-		}
-		case SIOCSIWMODE:
-		{
-			int ap = -1, infra = -1, passive = 0, wet = 0;
-			
-			switch (wrqu->mode) {
-				case IW_MODE_MONITOR:
-					passive = 1;
-					break;
-				case IW_MODE_ADHOC:
-					infra = 0;
-					ap = 0;
-					break;
-				case IW_MODE_MASTER:
-					infra = 1;
-					ap = 1;
-					break;
-				case IW_MODE_INFRA:
-					infra = 1;
-					ap = 0;
-					break;
-				case IW_MODE_REPEAT:
-					infra = 1;
-					ap = 0;
-					wet = 1;
-					break;
-					
-				default:
-					return -EINVAL;
-			}
-			
-			wl_ioctl(dev, WLC_SET_PASSIVE, &passive, sizeof(passive));
-			wl_ioctl(dev, WLC_SET_MONITOR, &passive, sizeof(passive));
-			wl_ioctl(dev, WLC_SET_WET, &wet, sizeof(wet));
-			if (ap >= 0) 
-				wl_ioctl(dev, WLC_SET_AP, &ap, sizeof(ap));
-			if (infra >= 0)
-				wl_ioctl(dev, WLC_SET_INFRA, &infra, sizeof(infra));
-
-			break;
-						
-		}
-		case SIOCGIWMODE:
-		{
-			int ap, infra, wet, passive;
-
-			if (wl_ioctl(dev, WLC_GET_AP, &ap, sizeof(ap)) < 0)
-				return -EINVAL;
-			if (wl_ioctl(dev, WLC_GET_INFRA, &infra, sizeof(infra)) < 0)
-				return -EINVAL;
-			if (wl_ioctl(dev, WLC_GET_PASSIVE, &passive, sizeof(passive)) < 0)
-				return -EINVAL;
-			if (wl_ioctl(dev, WLC_GET_WET, &wet, sizeof(wet)) < 0)
-				return -EINVAL;
-
-			if (passive) {
-				wrqu->mode = IW_MODE_MONITOR;
-			} else if (!infra) {
-				wrqu->mode = IW_MODE_ADHOC;
-			} else {
-				if (ap) {
-					wrqu->mode = IW_MODE_MASTER;
-				} else {
-					if (wet) {
-						wrqu->mode = IW_MODE_REPEAT;
-					} else {
-						wrqu->mode = IW_MODE_INFRA;
-					}
-				}
-			}
-			break;
-		}
-		default:
-		{
-			if (info->cmd >= SIOCIWFIRSTPRIV)
-				return wlcompat_private_ioctl(dev, info, wrqu, extra);
-
-			return -EINVAL;
-		}
-	}
-	
-	return 0;
-}
-
-static const iw_handler	 wlcompat_handler[] = {
-	NULL,			/* SIOCSIWCOMMIT */
-	wlcompat_ioctl,		/* SIOCGIWNAME */
-	NULL,			/* SIOCSIWNWID */
-	NULL,			/* SIOCGIWNWID */
-	wlcompat_ioctl,		/* SIOCSIWFREQ */
-	wlcompat_ioctl,		/* SIOCGIWFREQ */
-	wlcompat_ioctl,		/* SIOCSIWMODE */
-	wlcompat_ioctl,		/* SIOCGIWMODE */
-	NULL,			/* SIOCSIWSENS */
-	NULL,			/* SIOCGIWSENS */
-	NULL,			/* SIOCSIWRANGE, unused */
-	wlcompat_ioctl,		/* SIOCGIWRANGE */
-	NULL,			/* SIOCSIWPRIV */
-	NULL,			/* SIOCGIWPRIV */
-	NULL,			/* SIOCSIWSTATS */
-	NULL,			/* SIOCGIWSTATS */
-	iw_handler_set_spy,	/* SIOCSIWSPY */
-	iw_handler_get_spy,	/* SIOCGIWSPY */
-	iw_handler_set_thrspy,  /* SIOCSIWTHRSPY */
-	iw_handler_get_thrspy,  /* SIOCGIWTHRSPY */
-	wlcompat_ioctl,		/* SIOCSIWAP */
-	wlcompat_ioctl,		/* SIOCGIWAP */
-	NULL,			/* -- hole -- */
-	NULL,			/* SIOCGIWAPLIST */
-	wlcompat_set_scan,	/* SIOCSIWSCAN */
-	wlcompat_get_scan,	/* SIOCGIWSCAN */
-	wlcompat_ioctl,		/* SIOCSIWESSID */
-	wlcompat_ioctl,		/* SIOCGIWESSID */
-	NULL,			/* SIOCSIWNICKN */
-	NULL,			/* SIOCGIWNICKN */
-	NULL,			/* -- hole -- */
-	NULL,			/* -- hole -- */
-	NULL,			/* SIOCSIWRATE */
-	NULL,			/* SIOCGIWRATE */
-	wlcompat_ioctl,		/* SIOCSIWRTS */
-	wlcompat_ioctl,		/* SIOCGIWRTS */
-	wlcompat_ioctl,		/* SIOCSIWFRAG */
-	wlcompat_ioctl,		/* SIOCGIWFRAG */
-	wlcompat_ioctl,		/* SIOCSIWTXPOW */
-	wlcompat_ioctl,		/* SIOCGIWTXPOW */
-	NULL,			/* SIOCSIWRETRY */
-	NULL,			/* SIOCGIWRETRY */
-	wlcompat_ioctl,		/* SIOCSIWENCODE */
-	wlcompat_ioctl,		/* SIOCGIWENCODE */
-};
-
-
-#define WLCOMPAT_SET_MONITOR		SIOCIWFIRSTPRIV + 0
-#define WLCOMPAT_GET_MONITOR		SIOCIWFIRSTPRIV + 1
-#define WLCOMPAT_SET_TXPWR_LIMIT	SIOCIWFIRSTPRIV + 2
-#define WLCOMPAT_GET_TXPWR_LIMIT	SIOCIWFIRSTPRIV + 3
-#define WLCOMPAT_SET_ANTDIV			SIOCIWFIRSTPRIV + 4
-#define WLCOMPAT_GET_ANTDIV			SIOCIWFIRSTPRIV + 5
-#define WLCOMPAT_SET_TXANT			SIOCIWFIRSTPRIV + 6
-#define WLCOMPAT_GET_TXANT			SIOCIWFIRSTPRIV + 7
-#define WLCOMPAT_SET_BSS_FORCE		SIOCIWFIRSTPRIV + 8
-#define WLCOMPAT_GET_BSS_FORCE		SIOCIWFIRSTPRIV + 9
-
-
-static int wlcompat_private_ioctl(struct net_device *dev,
-			 struct iw_request_info *info,
-			 union iwreq_data *wrqu,
-			 char *extra)
-{
-	int *value = (int *) wrqu->name;
-
-	switch (info->cmd) {
-		case WLCOMPAT_SET_MONITOR:
-		{
-			if (wl_ioctl(dev, WLC_SET_MONITOR, value, sizeof(int)) < 0)
-				return -EINVAL;
-
-			break;
-		}
-		case WLCOMPAT_GET_MONITOR:
-		{
-			if (wl_ioctl(dev, WLC_GET_MONITOR, extra, sizeof(int)) < 0)
-				return -EINVAL;
-
-			break;
-		}
-		case WLCOMPAT_SET_TXPWR_LIMIT:
-		{
-			int val;
-			
-
-			if (wl_get_val(dev, "qtxpower", &val, sizeof(int)) < 0)
-				return -EINVAL;
-			
-			if (*extra > 0)
-				val |= WL_TXPWR_OVERRIDE;
-			else
-				val &= ~WL_TXPWR_OVERRIDE;
-			
-			if (wl_set_val(dev, "qtxpower", &val, sizeof(int)) < 0)
-				return -EINVAL;
-			
-			break;
-		}
-		case WLCOMPAT_GET_TXPWR_LIMIT:
-		{
-			if (wl_get_val(dev, "qtxpower", value, sizeof(int)) < 0)
-				return -EINVAL;
-
-			*value = ((*value & WL_TXPWR_OVERRIDE) == WL_TXPWR_OVERRIDE ? 1 : 0);
-
-			break;
-		}
-		case WLCOMPAT_SET_ANTDIV:
-		{
-			if (wl_ioctl(dev, WLC_SET_ANTDIV, value, sizeof(int)) < 0)
-				return -EINVAL;
-
-			break;
-		}
-		case WLCOMPAT_GET_ANTDIV:
-		{
-			if (wl_ioctl(dev, WLC_GET_ANTDIV, extra, sizeof(int)) < 0)
-				return -EINVAL;
-
-			break;
-		}
-		case WLCOMPAT_SET_TXANT:
-		{
-			if (wl_ioctl(dev, WLC_SET_TXANT, value, sizeof(int)) < 0)
-				return -EINVAL;
-
-			break;
-		}
-		case WLCOMPAT_GET_TXANT:
-		{
-			if (wl_ioctl(dev, WLC_GET_TXANT, extra, sizeof(int)) < 0)
-				return -EINVAL;
-
-			break;
-		}
-		case WLCOMPAT_SET_BSS_FORCE:
-		{
-			bss_force = (unsigned short) *value;
-			break;
-		}
-		case WLCOMPAT_GET_BSS_FORCE:
-		{
-			*extra = (int) bss_force;
-			break;
-		}
-		default:
-		{
-			return -EINVAL;
-		}
-			
-	}
-	return 0;
-}
-
-static const struct iw_priv_args wlcompat_private_args[] = 
-{
-	{	WLCOMPAT_SET_MONITOR, 
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		0,
-		"set_monitor"
-	},
-	{	WLCOMPAT_GET_MONITOR, 
-		0,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		"get_monitor"
-	},
-	{	WLCOMPAT_SET_TXPWR_LIMIT, 
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		0,
-		"set_txpwr_force"
-	},
-	{	WLCOMPAT_GET_TXPWR_LIMIT, 
-		0,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		"get_txpwr_force"
-	},
-	{	WLCOMPAT_SET_ANTDIV, 
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		0,
-		"set_antdiv"
-	},
-	{	WLCOMPAT_GET_ANTDIV, 
-		0,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		"get_antdiv"
-	},
-	{	WLCOMPAT_SET_TXANT, 
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		0,
-		"set_txant"
-	},
-	{	WLCOMPAT_GET_TXANT, 
-		0,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		"get_txant"
-	},
-	{	WLCOMPAT_SET_BSS_FORCE, 
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		0,
-		"set_bss_force"
-	},
-	{	WLCOMPAT_GET_BSS_FORCE, 
-		0,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		"get_bss_force"
-	},
-};
-
-static const iw_handler wlcompat_private[] =
-{
-	wlcompat_private_ioctl,
-	NULL
-};
-
-
-static const struct iw_handler_def wlcompat_handler_def =
-{
-	.standard	= (iw_handler *) wlcompat_handler,
-	.num_standard	= sizeof(wlcompat_handler)/sizeof(iw_handler),
-	.private	= wlcompat_private,
-	.num_private	= 1,
-	.private_args	= wlcompat_private_args,
-	.num_private_args = sizeof(wlcompat_private_args) / sizeof(wlcompat_private_args[0])
-};
-
-
-#ifdef DEBUG
-void print_buffer(int len, unsigned char *buf) {
-	int x;
-	if (buf != NULL) {
-		for (x=0;x<len && x<180 ;x++) {
-			if ((x % 4) == 0)
-				printk(" ");
-			printk("%02X",buf[x]);
-		}
-	} else {
-		printk(" NULL");
-	}
-	printk("\n");
-
-}
-#endif
-static int (*old_ioctl)(struct net_device *dev, struct ifreq *ifr, int cmd);
-static int new_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) {
-	int ret = 0;
-	struct iwreq *iwr = (struct iwreq *) ifr;
-	struct iw_request_info info;
-	
-#ifdef DEBUG
-	printk("dev: %s ioctl: 0x%04x\n",dev->name,cmd);
-#endif
-
-	if (cmd >= SIOCIWFIRSTPRIV) {
-		info.cmd = cmd;
-		info.flags = 0;
-		ret = wlcompat_private_ioctl(dev, &info, &(iwr->u), (char *) &(iwr->u));
-#ifdef DEBUG
-	} else if (cmd==SIOCDEVPRIVATE) {
-		wl_ioctl_t *ioc = (wl_ioctl_t *)ifr->ifr_data;
-		unsigned char *buf = ioc->buf;
-		printk("   cmd: %d buf: 0x%08x len: %d\n",ioc->cmd,&(ioc->buf),ioc->len);
-		printk("   send: ->");
-		print_buffer(ioc->len, buf);
-		ret = old_ioctl(dev,ifr,cmd);
-		printk("   recv: ->");
-		print_buffer(ioc->len, buf);
-		printk("   ret: %d\n", ret);
-#endif
-	} else {
-		ret = old_ioctl(dev,ifr,cmd);
-	}
-	return ret;
-}
-
-static int __init wlcompat_init()
-{
-	int found = 0, i;
-	char devname[4] = "wl0";
-	bss_force = 0;
-	
-	while (!found && (dev = dev_get_by_name(devname))) {
-		if ((dev->wireless_handlers == NULL) && ((wl_ioctl(dev, WLC_GET_MAGIC, &i, sizeof(i)) == 0) && i == WLC_IOCTL_MAGIC))
-			found = 1;
-		devname[2]++;
-	}
-	
-	if (!found) {
-		printk("No Broadcom devices found.\n");
-		return -ENODEV;
-	}
-		
-
-	old_ioctl = dev->do_ioctl;
-	dev->do_ioctl = new_ioctl;
-	dev->wireless_handlers = (struct iw_handler_def *)&wlcompat_handler_def;
-	dev->get_wireless_stats = wlcompat_get_wireless_stats;
-#ifdef DEBUG
-	printk("broadcom driver private data: 0x%08x\n", dev->priv);
-#endif
-	return 0;
-}
-
-static void __exit wlcompat_exit()
-{
-	dev->get_wireless_stats = NULL;
-	dev->wireless_handlers = NULL;
-	dev->do_ioctl = old_ioctl;
-	return;
-}
-
-EXPORT_NO_SYMBOLS;
-MODULE_AUTHOR("openwrt.org");
-MODULE_LICENSE("GPL");
-
-module_init(wlcompat_init);
-module_exit(wlcompat_exit);
diff --git a/openwrt/target/linux/package/zd1211/Config.in b/openwrt/target/linux/package/zd1211/Config.in
deleted file mode 100644
index 2852c84e55..0000000000
--- a/openwrt/target/linux/package/zd1211/Config.in
+++ /dev/null
@@ -1,11 +0,0 @@
-config BR2_PACKAGE_KMOD_ZD1211
-	prompt "kmod-zd12111...................... Driver for Zydas 1211 based devices"
-	tristate
-	depends BR2_LINUX_2_6
-	default m if CONFIG_DEVEL
-	help
-	  Linux driver for the ZyDAS ZD1211 802.11b/g USB-WLAN-Chip. 
-	  Initially contributed by ZyDAS, this driver is actively maintained 
-	  by the open source community.
-	
-	  http://zd1211.ath.cx/
diff --git a/openwrt/target/linux/package/zd1211/Makefile b/openwrt/target/linux/package/zd1211/Makefile
deleted file mode 100644
index e357af768e..0000000000
--- a/openwrt/target/linux/package/zd1211/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-# $Id: Makefile 3297 2006-03-02 23:42:52Z florian $
-
-include $(TOPDIR)/rules.mk
-include ../../rules.mk
-
-PKG_NAME:=zd1211
-PKG_VERSION:=r69
-PKG_RELEASE:=1
-PKG_MD5SUM:=c14133a3d5b27927402a492e84d2467a
-
-PKG_SOURCE_URL:=http://zd1211.ath.cx/download/
-PKG_SOURCE:=$(PKG_NAME)-driver-$(PKG_VERSION).tgz
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-driver-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_ZD1211,kmod-$(PKG_NAME),$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-$(PKG_BUILD_DIR)/.configured:
-	touch $@
-
-$(PKG_BUILD_DIR)/.built: 
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		CC="$(TARGET_CC)" \
-		CPP="$(TARGET_CC)" \
-		LD="$(TARGET_CROSS)ld" \
-		STAGING_DIR=$(STAGING_DIR) \
-		KERNELVERSION="$(KERNEL)" \
-		MODPATH="$(MODULES_DIR)" \
-		KERNEL_SOURCE="$(LINUX_DIR)" \
-		all
-	$(TARGET_CC) $(PKG_BUILD_DIR)/apdbg.c -o $(PKG_BUILD_DIR)/apdbg
-	touch $@
-
-$(IPKG_KMOD_ZD1211):
-	install -m0755 -d $(IDIR_KMOD_ZD1211)/lib/modules/$(LINUX_VERSION) \
-			  $(IDIR_KMOD_ZD1211)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/zd1211.$(LINUX_KMOD_SUFFIX) \
-		$(IDIR_KMOD_ZD1211)/lib/modules/$(LINUX_VERSION)/
-	$(CP) $(PKG_BUILD_DIR)/apdbg $(IDIR_KMOD_ZD1211)/usr/sbin/
-	$(CP) $(PKG_BUILD_DIR)/sta $(IDIR_KMOD_ZD1211)/usr/sbin/$(PKG_NAME)-sta
-	$(RSTRIP_KMOD) $(IDIR_KMOD_ZD1211)
-	$(IPKG_BUILD) $(IDIR_KMOD_ZD1211) $(PACKAGE_DIR)
-
diff --git a/openwrt/target/linux/package/zd1211/ipkg/kmod-zd1211.control b/openwrt/target/linux/package/zd1211/ipkg/kmod-zd1211.control
deleted file mode 100644
index 314fc91650..0000000000
--- a/openwrt/target/linux/package/zd1211/ipkg/kmod-zd1211.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-zd1211
-Section: net
-Description: Driver for Zydas 1211 based devices.
-Priority: optional
diff --git a/openwrt/target/linux/rules.mk b/openwrt/target/linux/rules.mk
deleted file mode 100644
index e0307affd9..0000000000
--- a/openwrt/target/linux/rules.mk
+++ /dev/null
@@ -1,93 +0,0 @@
-KERNEL:=unknown
-ifneq (,$(findstring 2.4.,$(LINUX_VERSION)))
-KERNEL:=2.4
-endif
-ifneq (,$(findstring 2.6.,$(LINUX_VERSION)))
-KERNEL:=2.6
-endif
-
-MODULES_SUBDIR:=lib/modules/$(LINUX_VERSION)
-
-LINUX_BUILD_DIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
-LINUX_DIR := $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION)
-LINUX_KERNEL:=$(LINUX_BUILD_DIR)/vmlinux
-
-LINUX_TARGET_DIR:=$(LINUX_BUILD_DIR)/root
-IPKG_KERNEL:=IPKG_TMP=$(BUILD_DIR)/tmp IPKG_INSTROOT=$(LINUX_TARGET_DIR) IPKG_CONF_DIR=$(LINUX_BUILD_DIR) $(SCRIPT_DIR)/ipkg -force-defaults -force-depends
-
-LINUX_KARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \
-	-e 's/mipsel/mips/' \
-	-e 's/mipseb/mips/' \
-	-e 's/powerpc/ppc/' \
-	-e 's/sh[234]/sh/' \
-	-e 's/armeb/arm/' \
-)
-
-KPKG_MAKEOPTS:=	IPKG="$(IPKG_KERNEL)" \
-		BOARD="$(BOARD)" \
-		KERNEL="$(KERNEL)" \
-		TARGET_DIR="$(LINUX_TARGET_DIR)" \
-		LINUX_BUILD_DIR="$(LINUX_BUILD_DIR)" \
-		LINUX_DIR="$(LINUX_DIR)" \
-		LINUX_VERSION="$(LINUX_VERSION)" \
-		LINUX_RELEASE="$(LINUX_RELEASE)"
-
-KMOD_BUILD_DIR := $(LINUX_BUILD_DIR)/linux-modules
-MODULES_DIR := $(LINUX_BUILD_DIR)/modules/$(MODULES_SUBDIR)
-TARGET_MODULES_DIR := $(LINUX_TARGET_DIR)/$(MODULES_SUBDIR)
-
-ifeq ($(KERNEL),2.6)
-LINUX_KMOD_SUFFIX=ko
-else
-LINUX_KMOD_SUFFIX=o
-endif
-
-define KMOD_template
-ifeq ($$(strip $(4)),)
-KDEPEND_$(1):=m
-else
-KDEPEND_$(1):=$($(4))
-endif
-
-IDEPEND_$(1):=kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE)) $(foreach pkg,$(5),", $(pkg)")
-
-PKG_$(1) := $(PACKAGE_DIR)/kmod-$(2)_$(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE)_$(ARCH).ipk
-I_$(1) := $(KMOD_BUILD_DIR)/ipkg/$(2)
-
-ifeq ($$(KDEPEND_$(1)),m)
-ifneq ($$(BR2_PACKAGE_KMOD_$(1)),)
-TARGETS += $$(PKG_$(1))
-endif
-ifeq ($$(BR2_PACKAGE_KMOD_$(1)),y)
-INSTALL_TARGETS += $$(PKG_$(1))
-endif
-endif
-
-$$(PKG_$(1)): $(LINUX_DIR)/.modules_done
-	rm -rf $$(I_$(1))
-	$(SCRIPT_DIR)/make-ipkg-dir.sh $$(I_$(1)) ../control/kmod-$(2).control $(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE) $(ARCH)
-	echo "Depends: $$(IDEPEND_$(1))" >> $$(I_$(1))/CONTROL/control
-ifneq ($(strip $(3)),)
-	mkdir -p $$(I_$(1))/lib/modules/$(LINUX_VERSION)
-	$(CP) $(3) $$(I_$(1))/lib/modules/$(LINUX_VERSION)
-endif
-ifneq ($(6),)
-	mkdir -p $$(I_$(1))/etc/modules.d
-	for module in $(7); do \
-		echo $$$$module >> $$(I_$(1))/etc/modules.d/$(6)-$(2); \
-	done
-	echo "#!/bin/sh" >> $$(I_$(1))/CONTROL/postinst
-	echo "[ -z \"\$$$$IPKG_INSTROOT\" ] || exit" >> $$(I_$(1))/CONTROL/postinst
-	echo ". /etc/functions.sh" >> $$(I_$(1))/CONTROL/postinst
-	echo "load_modules /etc/modules.d/$(6)-$(2)" >> $$(I_$(1))/CONTROL/postinst
-	chmod 0755 $$(I_$(1))/CONTROL/postinst
-endif
-	$(8)
-	$(IPKG_BUILD) $$(I_$(1)) $(PACKAGE_DIR) $(MAKE_TRACE)
-
-endef
-
-KERNEL_IPKG:=$(LINUX_BUILD_DIR)/kernel_$(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE)_$(ARCH).ipk
-INSTALL_TARGETS := $(KERNEL_IPKG)
-TARGETS := 
-
diff --git a/openwrt/target/linux/sibyte-2.6/Makefile b/openwrt/target/linux/sibyte-2.6/Makefile
deleted file mode 100644
index 5926e6ebcd..0000000000
--- a/openwrt/target/linux/sibyte-2.6/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-LINUX_VERSION:=2.6.16.7
-LINUX_RELEASE:=1
-LINUX_KERNEL_MD5SUM:=9682b2bd6e02f3087982d7c3f5ba824e
-
-include ../rules.mk
-include ./config
-
-include ../generic-$(KERNEL)/modules.mk
-include ../kernel.mk
-
-
-$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
-	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
-	@$(CP) config $(LINUX_DIR)/.config
-	touch $@
-
diff --git a/openwrt/target/linux/sibyte-2.6/config b/openwrt/target/linux/sibyte-2.6/config
deleted file mode 100644
index 3c5587fd77..0000000000
--- a/openwrt/target/linux/sibyte-2.6/config
+++ /dev/null
@@ -1,1311 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.4
-# Fri Apr 21 16:08:33 2006
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-CONFIG_SIBYTE_SWARM=y
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_SIBYTE_SB1250=y
-CONFIG_SIBYTE_SB1xxx_SOC=y
-# CONFIG_CPU_SB1_PASS_1 is not set
-# CONFIG_CPU_SB1_PASS_2_1250 is not set
-# CONFIG_CPU_SB1_PASS_2_2 is not set
-CONFIG_CPU_SB1_PASS_4=y
-# CONFIG_CPU_SB1_PASS_2_112x is not set
-# CONFIG_CPU_SB1_PASS_3 is not set
-CONFIG_SIBYTE_HAS_LDT=y
-# CONFIG_SIMULATION is not set
-# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
-# CONFIG_SB1_CERR_STALL is not set
-CONFIG_SIBYTE_CFE=y
-CONFIG_SIBYTE_CFE_CONSOLE=y
-# CONFIG_SIBYTE_BUS_WATCHER is not set
-# CONFIG_SIBYTE_SB1250_PROF is not set
-# CONFIG_SIBYTE_TBPROF is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DMA_COHERENT=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-CONFIG_CPU_SB1=y
-CONFIG_SYS_HAS_CPU_SB1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
-CONFIG_64BIT=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_SIBYTE_DMA_PAGEOPS is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_CPUSETS=y
-CONFIG_INITRAMFS_SOURCE="../root"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_BUILD_ELF64=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_MIPS32_O32=y
-# CONFIG_MIPS32_N32 is not set
-CONFIG_BINFMT_ELF32=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-CONFIG_IPSEC_NAT_TRAVERSAL=y
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-CONFIG_TCP_CONG_ADVANCED=y
-
-#
-# TCP congestion control
-#
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=m
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=y
-CONFIG_TCP_CONG_SCALABLE=m
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_BRIDGE_NETFILTER is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_SIP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_MATCH_POLICY is not set
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_IMQ=m
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_TTL=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-# CONFIG_IP6_NF_MATCH_POLICY is not set
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_IMQ=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_ATM_BR2684_IPFILTER=y
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_ESFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_NETROM is not set
-# CONFIG_ROSE is not set
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-# CONFIG_6PACK is not set
-# CONFIG_BPQETHER is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_YAM is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-# CONFIG_IMQ_BEHAVIOR_AA is not set
-# CONFIG_IMQ_BEHAVIOR_AB is not set
-CONFIG_IMQ_BEHAVIOR_BA=y
-# CONFIG_IMQ_BEHAVIOR_BB is not set
-CONFIG_IMQ_NUM_DEVS=2
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_NET_SB1250_MAC=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOSTAP_PCI is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_STALDRV is not set
-CONFIG_SIBYTE_SB1250_DUART=y
-CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
-# CONFIG_AU1000_UART is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_VMALLOC is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-# CONFIG_SB1XXX_CORELIS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/openwrt/target/linux/sibyte-2.6/patches/000-DUART.patch b/openwrt/target/linux/sibyte-2.6/patches/000-DUART.patch
deleted file mode 100644
index 480287ffa0..0000000000
--- a/openwrt/target/linux/sibyte-2.6/patches/000-DUART.patch
+++ /dev/null
@@ -1,956 +0,0 @@
---- linux-2.6.16.7/drivers/char/Kconfig	2006-04-21 14:38:30.000000000 -0700
-+++ linux-2.6.16.7/drivers/char/Kconfig	2006-04-21 14:39:29.000000000 -0700
-@@ -340,6 +340,14 @@
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called istallion.
- 
-+config SIBYTE_SB1250_DUART
-+	bool "Support for BCM1xxx onchip DUART"
-+	depends on MIPS && SIBYTE_SB1xxx_SOC=y
-+
-+config SIBYTE_SB1250_DUART_CONSOLE
-+	bool "Console on BCM1xxx DUART"
-+	depends on SIBYTE_SB1250_DUART
-+
- config AU1000_UART
- 	bool "Enable Au1000 UART Support"
- 	depends on SERIAL_NONSTANDARD && MIPS
-diff -Nurb linux-2.6.16.7/drivers/char/Makefile linux-2.6.16.7/drivers/char/Makefile
---- linux-2.6.16.7/drivers/char/Makefile	2006-04-17 14:53:25.000000000 -0700
-+++ linux-2.6.16.7/drivers/char/Makefile	2006-04-28 12:14:24.000000000 -0700
-@@ -31,6 +31,7 @@
- obj-$(CONFIG_A2232)		+= ser_a2232.o generic_serial.o
- obj-$(CONFIG_ATARI_DSP56K)	+= dsp56k.o
- obj-$(CONFIG_MOXA_SMARTIO)	+= mxser.o
-+obj-$(CONFIG_SIBYTE_SB1250_DUART) += sb1250_duart.o
- obj-$(CONFIG_COMPUTONE)		+= ip2.o ip2main.o
- obj-$(CONFIG_RISCOM8)		+= riscom8.o
- obj-$(CONFIG_ISI)		+= isicom.o
-diff -Nurb linux-2.6.16.7/drivers/char/sb1250_duart.c linux-2.6.16.7/drivers/char/sb1250_duart.c
---- linux-2.6.16.7/drivers/char/sb1250_duart.c	1969-12-31 16:00:00.000000000 -0800
-+++ linux-2.6.16.7/drivers/char/sb1250_duart.c	2006-04-28 12:13:49.000000000 -0700
-@@ -0,0 +1,911 @@
-+/*
-+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ * 
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-+ */
-+
-+/* 
-+ * Driver support for the on-chip sb1250 dual-channel serial port,
-+ * running in asynchronous mode.  Also, support for doing a serial console
-+ * on one of those ports 
-+ */
-+#include <linux/config.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/console.h>
-+#include <linux/kdev_t.h>
-+#include <linux/major.h>
-+#include <linux/termios.h>
-+#include <linux/spinlock.h>
-+#include <linux/irq.h>
-+#include <linux/errno.h>
-+#include <linux/tty.h>
-+#include <linux/sched.h>
-+#include <linux/tty_flip.h>
-+#include <linux/timer.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <asm/delay.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+#include <asm/sibyte/swarm.h>
-+#include <asm/sibyte/sb1250.h>
-+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
-+#include <asm/sibyte/bcm1480_regs.h>
-+#include <asm/sibyte/bcm1480_int.h>
-+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
-+#include <asm/sibyte/sb1250_regs.h>
-+#include <asm/sibyte/sb1250_int.h>
-+#else
-+#error invalid SiByte UART configuation
-+#endif
-+#include <asm/sibyte/sb1250_uart.h>
-+#include <asm/war.h>
-+
-+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
-+#define UNIT_CHANREG(n,reg)	A_BCM1480_DUART_CHANREG((n),(reg))
-+#define UNIT_IMRREG(n)		A_BCM1480_DUART_IMRREG(n)
-+#define UNIT_INT(n)		(K_BCM1480_INT_UART_0 + (n))
-+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
-+#define UNIT_CHANREG(n,reg)	A_DUART_CHANREG((n),(reg))
-+#define UNIT_IMRREG(n)		A_DUART_IMRREG(n)
-+#define UNIT_INT(n)		(K_INT_UART_0 + (n))
-+#else
-+#error invalid SiByte UART configuation
-+#endif
-+
-+/* Toggle spewing of debugging output */
-+#undef DEBUG
-+
-+#define DEFAULT_CFLAGS          (CS8 | B115200)
-+
-+#define TX_INTEN          1
-+#define DUART_INITIALIZED 2
-+
-+#define DUART_MAX_LINE 4
-+char sb1250_duart_present[DUART_MAX_LINE];
-+EXPORT_SYMBOL(sb1250_duart_present);
-+
-+/*
-+ * Still not sure what the termios structures set up here are for, 
-+ *  but we have to supply pointers to them to register the tty driver
-+ */
-+static struct tty_driver *sb1250_duart_driver; //, sb1250_duart_callout_driver;
-+
-+/*
-+ * This lock protects both the open flags for all the uart states as 
-+ * well as the reference count for the module
-+ */
-+static DEFINE_SPINLOCK(open_lock);
-+
-+typedef struct { 
-+	unsigned char       outp_buf[SERIAL_XMIT_SIZE];
-+	unsigned int        outp_head;
-+	unsigned int        outp_tail;
-+	unsigned int        outp_count;
-+	spinlock_t          outp_lock;
-+	unsigned int        open;
-+	unsigned int        line;
-+	unsigned int        last_cflags;
-+	unsigned long       flags;
-+	struct tty_struct   *tty;
-+	/* CSR addresses */
-+	volatile u32	    *status;
-+	volatile u32	    *imr;
-+	volatile u32	    *tx_hold;
-+	volatile u32	    *rx_hold;
-+	volatile u32	    *mode_1;
-+	volatile u32	    *mode_2;
-+	volatile u32	    *clk_sel;
-+	volatile u32	    *cmd;
-+} uart_state_t;
-+
-+static uart_state_t uart_states[DUART_MAX_LINE];
-+
-+/*
-+ * Inline functions local to this module 
-+ */
-+
-+/*
-+ * In bug 1956, we get glitches that can mess up uart registers.  This
-+ * "write-mode-1 after any register access" is the accepted
-+ * workaround.
-+ */
-+#if SIBYTE_1956_WAR
-+static unsigned int last_mode1[DUART_MAX_LINE];
-+#endif
-+
-+static inline u32 READ_SERCSR(volatile u32 *addr, int line)
-+{
-+	u32 val = csr_in32(addr);
-+#if SIBYTE_1956_WAR
-+	csr_out32(last_mode1[line], uart_states[line].mode_1);
-+#endif
-+	return val;
-+}
-+
-+static inline void WRITE_SERCSR(u32 val, volatile u32 *addr, int line)
-+{
-+	csr_out32(val, addr);
-+#if SIBYTE_1956_WAR
-+	csr_out32(last_mode1[line], uart_states[line].mode_1);
-+#endif
-+}
-+
-+static void init_duart_port(uart_state_t *port, int line)
-+{
-+	if (!(port->flags & DUART_INITIALIZED)) {
-+		port->line = line;
-+		port->status = IOADDR(UNIT_CHANREG(line, R_DUART_STATUS));
-+		port->imr = IOADDR(UNIT_IMRREG(line));
-+		port->tx_hold = IOADDR(UNIT_CHANREG(line, R_DUART_TX_HOLD));
-+		port->rx_hold = IOADDR(UNIT_CHANREG(line, R_DUART_RX_HOLD));
-+		port->mode_1 = IOADDR(UNIT_CHANREG(line, R_DUART_MODE_REG_1));
-+		port->mode_2 = IOADDR(UNIT_CHANREG(line, R_DUART_MODE_REG_2));
-+		port->clk_sel = IOADDR(UNIT_CHANREG(line, R_DUART_CLK_SEL));
-+		port->cmd = IOADDR(UNIT_CHANREG(line, R_DUART_CMD));
-+		port->flags |= DUART_INITIALIZED;
-+	}
-+}
-+
-+/*
-+ * Mask out the passed interrupt lines at the duart level.  This should be
-+ * called while holding the associated outp_lock.
-+ */
-+static inline void duart_mask_ints(unsigned int line, unsigned int mask)
-+{
-+	uart_state_t *port = uart_states + line;
-+	u64 tmp = READ_SERCSR(port->imr, line);
-+	WRITE_SERCSR(tmp & ~mask, port->imr, line);
-+}
-+
-+	
-+/* Unmask the passed interrupt lines at the duart level */
-+static inline void duart_unmask_ints(unsigned int line, unsigned int mask)
-+{
-+	uart_state_t *port = uart_states + line;
-+	u64 tmp = READ_SERCSR(port->imr, line);
-+	WRITE_SERCSR(tmp | mask, port->imr, line);
-+}
-+
-+static inline void transmit_char_pio(uart_state_t *us)
-+{
-+	struct tty_struct *tty = us->tty;
-+	int blocked = 0;
-+
-+	if (spin_trylock(&us->outp_lock)) {
-+		for (;;) {
-+			if (!(READ_SERCSR(us->status, us->line) & M_DUART_TX_RDY))
-+				break;
-+			if (us->outp_count <= 0 || tty->stopped || tty->hw_stopped) {
-+				break;
-+			} else {
-+				WRITE_SERCSR(us->outp_buf[us->outp_head],
-+					     us->tx_hold, us->line);
-+				us->outp_head = (us->outp_head + 1) & (SERIAL_XMIT_SIZE-1);
-+				if (--us->outp_count <= 0)
-+					break;
-+			}
-+			udelay(10);
-+		}
-+		spin_unlock(&us->outp_lock);
-+	} else {
-+		blocked = 1;
-+	}
-+
-+	if (!us->outp_count || tty->stopped ||
-+	    tty->hw_stopped || blocked) {
-+		us->flags &= ~TX_INTEN;
-+		duart_mask_ints(us->line, M_DUART_IMR_TX);
-+	}
-+
-+      	if (us->open &&
-+	    (us->outp_count < (SERIAL_XMIT_SIZE/2))) {
-+		/*
-+		 * We told the discipline at one point that we had no
-+		 * space, so it went to sleep.  Wake it up when we hit
-+		 * half empty
-+		 */
-+		if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-+		    tty->ldisc.write_wakeup)
-+			tty->ldisc.write_wakeup(tty);
-+		wake_up_interruptible(&tty->write_wait);
-+	}
-+}
-+
-+/* 
-+ * Generic interrupt handler for both channels.  dev_id is a pointer
-+ * to the proper uart_states structure, so from that we can derive 
-+ * which port interrupted 
-+ */
-+
-+static irqreturn_t duart_int(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	uart_state_t *us = (uart_state_t *)dev_id;
-+	struct tty_struct *tty = us->tty;
-+	unsigned int status = READ_SERCSR(us->status, us->line);
-+
-+	pr_debug("DUART INT\n");
-+
-+	if (status & M_DUART_RX_RDY) {
-+		int counter = 2048;
-+		unsigned int ch;
-+
-+		if (status & M_DUART_OVRUN_ERR)
-+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-+		if (status & M_DUART_PARITY_ERR) {
-+			printk("Parity error!\n");
-+		} else if (status & M_DUART_FRM_ERR) {
-+			printk("Frame error!\n");
-+		}
-+
-+		while (counter > 0) {
-+			if (!(READ_SERCSR(us->status, us->line) & M_DUART_RX_RDY))
-+				break;
-+			ch = READ_SERCSR(us->rx_hold, us->line);
-+			tty_insert_flip_char(tty, ch, 0);
-+			udelay(1);
-+			counter--;
-+		}
-+		tty_flip_buffer_push(tty);
-+	}
-+
-+	if (status & M_DUART_TX_RDY) {
-+		transmit_char_pio(us);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-+ *  Actual driver functions
-+ */
-+
-+/* Return the number of characters we can accomodate in a write at this instant */
-+static int duart_write_room(struct tty_struct *tty)
-+{
-+	uart_state_t *us = (uart_state_t *) tty->driver_data;
-+	int retval;
-+
-+	retval = SERIAL_XMIT_SIZE - us->outp_count;
-+
-+	pr_debug("duart_write_room called, returning %i\n", retval);
-+
-+	return retval;
-+}
-+
-+/* memcpy the data from src to destination, but take extra care if the
-+   data is coming from user space */
-+static inline int copy_buf(char *dest, const char *src, int size, int from_user) 
-+{
-+	if (from_user) {
-+		(void) copy_from_user(dest, src, size); 
-+	} else {
-+		memcpy(dest, src, size);
-+	}
-+	return size;
-+}
-+
-+/*
-+ * Buffer up to count characters from buf to be written.  If we don't have
-+ * other characters buffered, enable the tx interrupt to start sending
-+ */
-+static int duart_write(struct tty_struct *tty, const unsigned char *buf,
-+		       int count)
-+{
-+	uart_state_t *us;
-+	int c, t, total = 0;
-+	unsigned long flags;
-+
-+	if (!tty) return 0;
-+
-+	us = tty->driver_data;
-+	if (!us) return 0;
-+
-+	pr_debug("duart_write called for %i chars by %i (%s)\n", count, current->pid, current->comm);
-+
-+	spin_lock_irqsave(&us->outp_lock, flags);
-+
-+	for (;;) {
-+		c = count;
-+
-+		t = SERIAL_XMIT_SIZE - us->outp_tail;
-+		if (t < c) c = t;
-+
-+		t = SERIAL_XMIT_SIZE - 1 - us->outp_count;
-+		if (t < c) c = t;
-+
-+		if (c <= 0) break;
-+
-+		memcpy(us->outp_buf + us->outp_tail, buf, c);
-+
-+		us->outp_count += c;
-+		us->outp_tail = (us->outp_tail + c) & (SERIAL_XMIT_SIZE - 1);
-+		buf += c;
-+		count -= c;
-+		total += c;
-+	}
-+
-+	spin_unlock_irqrestore(&us->outp_lock, flags);
-+
-+	if (us->outp_count && !tty->stopped && 
-+	    !tty->hw_stopped && !(us->flags & TX_INTEN)) {
-+		us->flags |= TX_INTEN;
-+		duart_unmask_ints(us->line, M_DUART_IMR_TX);
-+	}
-+
-+	return total;
-+}
-+
-+
-+/* Buffer one character to be written.  If there's not room for it, just drop
-+   it on the floor.  This is used for echo, among other things */
-+static void duart_put_char(struct tty_struct *tty, u_char ch)
-+{
-+	uart_state_t *us = (uart_state_t *) tty->driver_data;
-+	unsigned long flags;
-+
-+	pr_debug("duart_put_char called.  Char is %x (%c)\n", (int)ch, ch);
-+
-+	spin_lock_irqsave(&us->outp_lock, flags);
-+
-+	if (us->outp_count == SERIAL_XMIT_SIZE) {
-+		spin_unlock_irqrestore(&us->outp_lock, flags);
-+		return;
-+	}
-+
-+	us->outp_buf[us->outp_tail] = ch;
-+	us->outp_tail = (us->outp_tail + 1) &(SERIAL_XMIT_SIZE-1);
-+	us->outp_count++;
-+
-+	spin_unlock_irqrestore(&us->outp_lock, flags);
-+}
-+
-+static void duart_flush_chars(struct tty_struct * tty)
-+{
-+	uart_state_t *port;
-+
-+	if (!tty) return;
-+
-+	port = tty->driver_data;
-+
-+	if (!port) return;
-+
-+	if (port->outp_count <= 0 || tty->stopped || tty->hw_stopped) {
-+		return;
-+	}
-+
-+	port->flags |= TX_INTEN;
-+	duart_unmask_ints(port->line, M_DUART_IMR_TX);
-+}
-+
-+/* Return the number of characters in the output buffer that have yet to be 
-+   written */
-+static int duart_chars_in_buffer(struct tty_struct *tty)
-+{
-+	uart_state_t *us = (uart_state_t *) tty->driver_data;
-+	int retval;
-+
-+	retval = us->outp_count;
-+
-+	pr_debug("duart_chars_in_buffer returning %i\n", retval);
-+
-+	return retval;
-+}
-+
-+/* Kill everything we haven't yet shoved into the FIFO.  Turn off the
-+   transmit interrupt since we've nothing more to transmit */
-+static void duart_flush_buffer(struct tty_struct *tty)
-+{
-+	uart_state_t *us = (uart_state_t *) tty->driver_data;
-+	unsigned long flags;
-+
-+	pr_debug("duart_flush_buffer called\n");
-+	spin_lock_irqsave(&us->outp_lock, flags);
-+	us->outp_head = us->outp_tail = us->outp_count = 0;
-+	spin_unlock_irqrestore(&us->outp_lock, flags);
-+
-+	wake_up_interruptible(&us->tty->write_wait);
-+	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-+	    tty->ldisc.write_wakeup)
-+		tty->ldisc.write_wakeup(tty);
-+}
-+
-+
-+/* See sb1250 user manual for details on these registers */
-+static inline void duart_set_cflag(unsigned int line, unsigned int cflag)
-+{
-+	unsigned int mode_reg1 = 0, mode_reg2 = 0;
-+	unsigned int clk_divisor;
-+	uart_state_t *port = uart_states + line;
-+
-+	switch (cflag & CSIZE) {
-+	case CS7:
-+		mode_reg1 |= V_DUART_BITS_PER_CHAR_7;
-+		
-+	default:
-+		/* We don't handle CS5 or CS6...is there a way we're supposed to flag this? 
-+		   right now we just force them to CS8 */
-+		mode_reg1 |= 0x0;
-+		break;
-+	}
-+	if (cflag & CSTOPB) {
-+	        mode_reg2 |= M_DUART_STOP_BIT_LEN_2;
-+	}
-+	if (!(cflag & PARENB)) {
-+	        mode_reg1 |= V_DUART_PARITY_MODE_NONE;
-+	}
-+	if (cflag & PARODD) {
-+		mode_reg1 |= M_DUART_PARITY_TYPE_ODD;
-+	}
-+	
-+	/* Formula for this is (5000000/baud)-1, but we saturate
-+	   at 12 bits, which means we can't actually do anything less
-+	   that 1200 baud */
-+	switch (cflag & CBAUD) {
-+	case B200:	
-+	case B300:	
-+	case B1200:	clk_divisor = 4095;		break;
-+	case B1800:	clk_divisor = 2776;		break;
-+	case B2400:	clk_divisor = 2082;		break;
-+	case B4800:	clk_divisor = 1040;		break;
-+	default:
-+	case B9600:	clk_divisor = 519;		break;
-+	case B19200:	clk_divisor = 259;		break;
-+	case B38400:	clk_divisor = 129;		break;
-+	case B57600:	clk_divisor = 85;		break;
-+	case B115200:	clk_divisor = 42;		break;
-+	}
-+	WRITE_SERCSR(mode_reg1, port->mode_1, port->line);
-+	WRITE_SERCSR(mode_reg2, port->mode_2, port->line);
-+	WRITE_SERCSR(clk_divisor, port->clk_sel, port->line);
-+	port->last_cflags = cflag;
-+}
-+
-+
-+/* Handle notification of a termios change.  */
-+static void duart_set_termios(struct tty_struct *tty, struct termios *old)
-+{
-+	uart_state_t *us = (uart_state_t *) tty->driver_data;
-+
-+	pr_debug("duart_set_termios called by %i (%s)\n", current->pid, current->comm);
-+	if (old && tty->termios->c_cflag == old->c_cflag)
-+		return;
-+	duart_set_cflag(us->line, tty->termios->c_cflag);
-+}
-+
-+static int get_serial_info(uart_state_t *us, struct serial_struct * retinfo) {
-+
-+	struct serial_struct tmp;
-+
-+	memset(&tmp, 0, sizeof(tmp));
-+
-+	tmp.type=PORT_SB1250;
-+	tmp.line=us->line;
-+	tmp.port=UNIT_CHANREG(tmp.line,0);
-+	tmp.irq=UNIT_INT(tmp.line);
-+	tmp.xmit_fifo_size=16; /* fixed by hw */
-+	tmp.baud_base=5000000;
-+	tmp.io_type=SERIAL_IO_MEM;
-+
-+	if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
-+		return -EFAULT;
-+
-+	return 0;
-+}
-+
-+static int duart_ioctl(struct tty_struct *tty, struct file * file,
-+		       unsigned int cmd, unsigned long arg)
-+{
-+	uart_state_t *us = (uart_state_t *) tty->driver_data;
-+
-+/*	if (serial_paranoia_check(info, tty->device, "rs_ioctl"))
-+	return -ENODEV;*/
-+	switch (cmd) {
-+	case TIOCMGET:
-+		printk("Ignoring TIOCMGET\n");
-+		break;
-+	case TIOCMBIS:
-+		printk("Ignoring TIOCMBIS\n");
-+		break;
-+	case TIOCMBIC:
-+		printk("Ignoring TIOCMBIC\n");
-+		break;
-+	case TIOCMSET:
-+		printk("Ignoring TIOCMSET\n");
-+		break;
-+	case TIOCGSERIAL:
-+		return get_serial_info(us,(struct serial_struct *) arg);
-+	case TIOCSSERIAL:
-+		printk("Ignoring TIOCSSERIAL\n");
-+		break;
-+	case TIOCSERCONFIG:
-+		printk("Ignoring TIOCSERCONFIG\n");
-+		break;
-+	case TIOCSERGETLSR: /* Get line status register */
-+		printk("Ignoring TIOCSERGETLSR\n");
-+		break;
-+	case TIOCSERGSTRUCT:
-+		printk("Ignoring TIOCSERGSTRUCT\n");
-+		break;
-+	case TIOCMIWAIT:
-+		printk("Ignoring TIOCMIWAIT\n");
-+		break;
-+	case TIOCGICOUNT:
-+		printk("Ignoring TIOCGICOUNT\n");
-+		break;
-+	case TIOCSERGWILD:
-+		printk("Ignoring TIOCSERGWILD\n");
-+		break;
-+	case TIOCSERSWILD:
-+		printk("Ignoring TIOCSERSWILD\n");
-+		break;
-+	default:
-+		break;
-+	}
-+//	printk("Ignoring IOCTL %x from pid %i (%s)\n", cmd, current->pid, current->comm);
-+	return -ENOIOCTLCMD;
-+}
-+
-+/* XXXKW locking? */
-+static void duart_start(struct tty_struct *tty)
-+{
-+	uart_state_t *us = (uart_state_t *) tty->driver_data;
-+
-+	pr_debug("duart_start called\n");
-+
-+	if (us->outp_count && !(us->flags & TX_INTEN)) {
-+		us->flags |= TX_INTEN;
-+		duart_unmask_ints(us->line, M_DUART_IMR_TX);
-+	}
-+}
-+
-+/* XXXKW locking? */
-+static void duart_stop(struct tty_struct *tty)
-+{
-+	uart_state_t *us = (uart_state_t *) tty->driver_data;
-+
-+	pr_debug("duart_stop called\n");
-+
-+	if (us->outp_count && (us->flags & TX_INTEN)) {
-+		us->flags &= ~TX_INTEN;
-+		duart_mask_ints(us->line, M_DUART_IMR_TX);
-+	}
-+}
-+
-+/* Not sure on the semantics of this; are we supposed to wait until the stuff
-+   already in the hardware FIFO drains, or are we supposed to wait until 
-+   we've drained the output buffer, too?  I'm assuming the former, 'cause thats
-+   what the other drivers seem to assume 
-+*/
-+
-+static void duart_wait_until_sent(struct tty_struct *tty, int timeout)
-+{
-+	uart_state_t *us = (uart_state_t *) tty->driver_data;
-+	unsigned long orig_jiffies;
-+
-+	orig_jiffies = jiffies;
-+	pr_debug("duart_wait_until_sent(%d)+\n", timeout);
-+	while (!(READ_SERCSR(us->status, us->line) & M_DUART_TX_EMT)) {
-+		set_current_state(TASK_INTERRUPTIBLE);
-+	 	schedule_timeout(1);
-+		if (signal_pending(current))
-+			break;
-+		if (timeout && time_after(jiffies, orig_jiffies + timeout))
-+			break;
-+	}
-+	pr_debug("duart_wait_until_sent()-\n");
-+}
-+
-+/*
-+ * duart_hangup() --- called by tty_hangup() when a hangup is signaled.
-+ */
-+static void duart_hangup(struct tty_struct *tty)
-+{
-+	uart_state_t *us = (uart_state_t *) tty->driver_data;
-+
-+	duart_flush_buffer(tty);
-+	us->open = 0;
-+	us->tty = 0;
-+}
-+
-+/*
-+ * Open a tty line.  Note that this can be called multiple times, so ->open can
-+ * be >1.  Only set up the tty struct if this is a "new" open, e.g. ->open was
-+ * zero
-+ */
-+static int duart_open(struct tty_struct *tty, struct file *filp)
-+{
-+	uart_state_t *us;
-+	unsigned int line = tty->index;
-+	unsigned long flags;
-+
-+	if ((line >= tty->driver->num) || !sb1250_duart_present[line])
-+		return -ENODEV;
-+
-+	pr_debug("duart_open called by %i (%s), tty is %p, rw is %p, ww is %p\n",
-+	       current->pid, current->comm, tty, tty->read_wait,
-+	       tty->write_wait);
-+
-+	us = uart_states + line;
-+	tty->driver_data = us;
-+
-+	spin_lock_irqsave(&open_lock, flags);
-+	if (!us->open) {
-+		us->tty = tty;
-+		us->tty->termios->c_cflag = us->last_cflags;
-+	}
-+	us->open++;
-+	us->flags &= ~TX_INTEN;
-+	duart_unmask_ints(line, M_DUART_IMR_RX);
-+	spin_unlock_irqrestore(&open_lock, flags);
-+
-+	return 0;
-+}
-+
-+
-+/*
-+ * Close a reference count out.  If reference count hits zero, null the
-+ * tty, kill the interrupts.  The tty_io driver is responsible for making
-+ * sure we've cleared out our internal buffers before calling close()
-+ */
-+static void duart_close(struct tty_struct *tty, struct file *filp)
-+{
-+	uart_state_t *us = (uart_state_t *) tty->driver_data;
-+	unsigned long flags;
-+
-+	pr_debug("duart_close called by %i (%s)\n", current->pid, current->comm);
-+
-+	if (!us || !us->open)
-+		return;
-+
-+	spin_lock_irqsave(&open_lock, flags);
-+	if (tty_hung_up_p(filp)) {
-+		spin_unlock_irqrestore(&open_lock, flags);
-+		return;
-+	}
-+
-+	if (--us->open < 0) {
-+		us->open = 0;
-+		printk(KERN_ERR "duart: bad open count: %d\n", us->open);
-+	}
-+	if (us->open) {
-+		spin_unlock_irqrestore(&open_lock, flags);
-+		return;
-+	}
-+
-+	spin_unlock_irqrestore(&open_lock, flags);
-+
-+	tty->closing = 1;
-+
-+	/* Stop accepting input */
-+	duart_mask_ints(us->line, M_DUART_IMR_RX);
-+	/* Wait for FIFO to drain */
-+	while (!(READ_SERCSR(us->status, us->line) & M_DUART_TX_EMT))
-+		;
-+
-+	if (tty->driver->flush_buffer)
-+		tty->driver->flush_buffer(tty);
-+	if (tty->ldisc.flush_buffer)
-+		tty->ldisc.flush_buffer(tty);
-+	tty->closing = 0;
-+}
-+
-+
-+static struct tty_operations duart_ops = {
-+        .open   = duart_open,
-+        .close = duart_close,
-+        .write = duart_write,
-+        .put_char = duart_put_char,
-+        .flush_chars = duart_flush_chars,
-+        .write_room = duart_write_room,
-+        .chars_in_buffer = duart_chars_in_buffer,
-+        .flush_buffer = duart_flush_buffer,
-+        .ioctl = duart_ioctl,
-+//        .throttle = duart_throttle,
-+//        .unthrottle = duart_unthrottle,
-+        .set_termios = duart_set_termios,
-+        .stop = duart_stop,
-+        .start = duart_start,
-+        .hangup = duart_hangup,
-+	.wait_until_sent = duart_wait_until_sent,
-+};
-+
-+/* Initialize the sb1250_duart_present array based on SOC type.  */
-+static void __init sb1250_duart_init_present_lines(void)
-+{
-+	int i, max_lines;
-+
-+	/* Set the number of available units based on the SOC type.  */
-+	switch (soc_type) {
-+	case K_SYS_SOC_TYPE_BCM1x55:
-+	case K_SYS_SOC_TYPE_BCM1x80:
-+		max_lines = 4;
-+		break;
-+	default:
-+		/* Assume at least two serial ports at the normal address.  */
-+		max_lines = 2;
-+		break;
-+	}
-+	if (max_lines > DUART_MAX_LINE)
-+		max_lines = DUART_MAX_LINE;
-+
-+	for (i = 0; i < max_lines; i++)
-+		sb1250_duart_present[i] = 1;
-+}
-+
-+/* Set up the driver and register it, register the UART interrupts.  This
-+   is called from tty_init, or as a part of the module init */
-+static int __init sb1250_duart_init(void) 
-+{
-+	int i;
-+
-+	sb1250_duart_init_present_lines();
-+
-+	sb1250_duart_driver = alloc_tty_driver(DUART_MAX_LINE);
-+	if (!sb1250_duart_driver)
-+		return -ENOMEM;
-+
-+	sb1250_duart_driver->owner = THIS_MODULE;
-+	sb1250_duart_driver->name = "duart";
-+	sb1250_duart_driver->devfs_name = "duart/";
-+	sb1250_duart_driver->major = TTY_MAJOR;
-+	sb1250_duart_driver->minor_start = SB1250_DUART_MINOR_BASE;
-+	sb1250_duart_driver->type            = TTY_DRIVER_TYPE_SERIAL;
-+	sb1250_duart_driver->subtype         = SERIAL_TYPE_NORMAL;
-+	sb1250_duart_driver->init_termios    = tty_std_termios;
-+	sb1250_duart_driver->flags           = TTY_DRIVER_REAL_RAW;
-+	tty_set_operations(sb1250_duart_driver, &duart_ops);
-+
-+	for (i=0; i<DUART_MAX_LINE; i++) {
-+		uart_state_t *port = uart_states + i;
-+
-+		if (!sb1250_duart_present[i])
-+			continue;
-+
-+		init_duart_port(port, i);
-+		spin_lock_init(&port->outp_lock);
-+		duart_mask_ints(i, M_DUART_IMR_ALL);
-+		if (request_irq(UNIT_INT(i), duart_int, 0, "uart", port)) {
-+			panic("Couldn't get uart0 interrupt line");
-+		}
-+		__raw_writeq(M_DUART_RX_EN|M_DUART_TX_EN,
-+			     IOADDR(UNIT_CHANREG(i, R_DUART_CMD)));
-+		duart_set_cflag(i, DEFAULT_CFLAGS);
-+	}
-+
-+	/* Interrupts are now active, our ISR can be called. */
-+
-+	if (tty_register_driver(sb1250_duart_driver)) {
-+		printk(KERN_ERR "Couldn't register sb1250 duart serial driver\n");
-+		put_tty_driver(sb1250_duart_driver);
-+		return 1;
-+	}
-+	return 0;
-+}
-+
-+/* Unload the driver.  Unregister stuff, get ready to go away */
-+static void __exit sb1250_duart_fini(void)
-+{
-+	unsigned long flags;
-+	int i;
-+
-+	local_irq_save(flags);
-+	tty_unregister_driver(sb1250_duart_driver);
-+	put_tty_driver(sb1250_duart_driver);
-+
-+	for (i=0; i<DUART_MAX_LINE; i++) {
-+		if (!sb1250_duart_present[i])
-+			continue;
-+		free_irq(UNIT_INT(i), &uart_states[i]);
-+		disable_irq(UNIT_INT(i));
-+	}
-+	local_irq_restore(flags);
-+}
-+
-+module_init(sb1250_duart_init);
-+module_exit(sb1250_duart_fini);
-+MODULE_DESCRIPTION("SB1250 Duart serial driver");
-+MODULE_AUTHOR("Broadcom Corp.");
-+
-+#ifdef CONFIG_SIBYTE_SB1250_DUART_CONSOLE
-+
-+/*
-+ * Serial console stuff.  Very basic, polling driver for doing serial
-+ * console output.  The console_sem is held by the caller, so we
-+ * shouldn't be interrupted for more console activity.
-+ * XXXKW What about getting interrupted by uart driver activity?
-+ */
-+
-+void serial_outc(unsigned char c, int line)
-+{
-+	uart_state_t *port = uart_states + line;
-+	while (!(READ_SERCSR(port->status, line) & M_DUART_TX_RDY)) ;
-+	WRITE_SERCSR(c, port->tx_hold, line);
-+	while (!(READ_SERCSR(port->status, port->line) & M_DUART_TX_EMT)) ;
-+}
-+
-+static void ser_console_write(struct console *cons, const char *s,
-+	unsigned int count)
-+{
-+	int line = cons->index;
-+	uart_state_t *port = uart_states + line;
-+	u32 imr;
-+
-+	imr = READ_SERCSR(port->imr, line);
-+	WRITE_SERCSR(0, port->imr, line);
-+	while (count--) {
-+		if (*s == '\n')
-+			serial_outc('\r', line);
-+		serial_outc(*s++, line);
-+    	}
-+	WRITE_SERCSR(imr, port->imr, line);
-+}
-+
-+static struct tty_driver *ser_console_device(struct console *c, int *index)
-+{
-+	*index = c->index;
-+	return sb1250_duart_driver;
-+}
-+
-+static int ser_console_setup(struct console *cons, char *str)
-+{
-+	int i;
-+
-+	sb1250_duart_init_present_lines();
-+
-+	for (i=0; i<DUART_MAX_LINE; i++) {
-+		uart_state_t *port = uart_states + i;
-+
-+		if (!sb1250_duart_present[i])
-+			continue;
-+
-+		init_duart_port(port, i);
-+#if SIBYTE_1956_WAR
-+		last_mode1[i] = V_DUART_PARITY_MODE_NONE|V_DUART_BITS_PER_CHAR_8;
-+#endif
-+		WRITE_SERCSR(V_DUART_PARITY_MODE_NONE|V_DUART_BITS_PER_CHAR_8,
-+			     port->mode_1, i);
-+		WRITE_SERCSR(M_DUART_STOP_BIT_LEN_1,
-+			     port->mode_2, i);
-+		WRITE_SERCSR(V_DUART_BAUD_RATE(115200),
-+			     port->clk_sel, i);
-+		WRITE_SERCSR(M_DUART_RX_EN|M_DUART_TX_EN,
-+			     port->cmd, i);
-+	}
-+	return 0;
-+}
-+
-+static struct console sb1250_ser_cons = {
-+	.name		= "duart",
-+	.write		= ser_console_write,
-+	.device		= ser_console_device,
-+	.setup		= ser_console_setup,
-+	.flags		= CON_PRINTBUFFER,
-+	.index		= -1,
-+};
-+
-+static int __init sb1250_serial_console_init(void)
-+{
-+	register_console(&sb1250_ser_cons);
-+	return 0;
-+}
-+
-+console_initcall(sb1250_serial_console_init);
-+
-+#endif /* CONFIG_SIBYTE_SB1250_DUART_CONSOLE */
-diff -Nurb linux-2.6.16.7/include/linux/serial.h linux-2.6.16.7/include/linux/serial.h
---- linux-2.6.16.7/include/linux/serial.h	2006-04-17 14:53:25.000000000 -0700
-+++ linux-2.6.16.7/include/linux/serial.h	2006-04-28 12:25:19.000000000 -0700
-@@ -76,7 +76,8 @@
- #define PORT_16654	11
- #define PORT_16850	12
- #define PORT_RSA	13	/* RSA-DV II/S card */
--#define PORT_MAX	13
-+#define PORT_SB1250	14
-+#define PORT_MAX	14
- 
- #define SERIAL_IO_PORT	0
- #define SERIAL_IO_HUB6	1
diff --git a/openwrt/target/linux/sibyte-2.6/patches/001-bcm112x_ax.patch b/openwrt/target/linux/sibyte-2.6/patches/001-bcm112x_ax.patch
deleted file mode 100644
index c80d4aea54..0000000000
--- a/openwrt/target/linux/sibyte-2.6/patches/001-bcm112x_ax.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- linux-2.6.16.4/arch/mips/sibyte/sb1250/setup.c	2006-04-21 16:16:18.000000000 -0700
-+++ linux-2.6.16.4/arch/mips/sibyte/sb1250/setup.c	2006-04-21 16:15:22.000000000 -0700
-@@ -140,6 +140,14 @@
- 		periph_rev = 3;
- 		pass_str = "A2";
- 		break;
-+	case K_SYS_REVISION_BCM112x_A3:
-+		periph_rev = 3;
-+		pass_str = "A3";
-+		break;
-+	case K_SYS_REVISION_BCM112x_A4:
-+		periph_rev = 3;
-+		pass_str = "A4";
-+		break;
- 	default:
- 		prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
- 		ret = 1;
diff --git a/openwrt/target/linux/x86-2.4/Makefile b/openwrt/target/linux/x86-2.4/Makefile
deleted file mode 100644
index 5f20f1e406..0000000000
--- a/openwrt/target/linux/x86-2.4/Makefile
+++ /dev/null
@@ -1,30 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-LINUX_VERSION:=2.4.32
-LINUX_RELEASE:=1
-LINUX_KERNEL_MD5SUM:=38f4d0830e95a20f4bfed17622d5557c
-
-include ../rules.mk
-include ./config
-
-$(eval $(call KMOD_template,WD1100,wd1100,\
-	$(MODULES_DIR)/kernel/drivers/char/wd1100.o \
-,CONFIG_WD1100))
-
-
-include ../generic-$(KERNEL)/modules.mk
-include ../kernel.mk
-
-
-$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
-	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
-	@$(CP) config $(LINUX_DIR)/.config
-	touch $@
-
-$(LINUX_BUILD_DIR)/bzImage: $(LINUX_DIR)/vmlinux
-	$(MAKE) -C $(LINUX_DIR) TOPDIR=$(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) bzImage $(MAKE_TRACE)
-	$(CP) $(LINUX_DIR)/arch/i386/boot/bzImage $@
-	touch $@
-
-compile: $(LINUX_BUILD_DIR)/bzImage
diff --git a/openwrt/target/linux/x86-2.4/config b/openwrt/target/linux/x86-2.4/config
deleted file mode 100644
index 1adc29508e..0000000000
--- a/openwrt/target/linux/x86-2.4/config
+++ /dev/null
@@ -1,1431 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_X86=y
-# CONFIG_SBUS is not set
-CONFIG_UID16=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_KMOD is not set
-
-#
-# Processor type and features
-#
-# CONFIG_M386 is not set
-CONFIG_M486=y
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MELAN is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MGEODE is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_XADD=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_X86_L1_CACHE_SHIFT=4
-CONFIG_X86_USE_STRING_486=y
-CONFIG_X86_ALIGNMENT_16=y
-CONFIG_X86_PPRO_FENCE=y
-# CONFIG_X86_F00F_WORKS_OK is not set
-CONFIG_X86_MCE=y
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_CPUID is not set
-# CONFIG_EDD is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_MTRR is not set
-# CONFIG_SMP is not set
-# CONFIG_X86_UP_APIC is not set
-# CONFIG_X86_UP_IOAPIC is not set
-# CONFIG_X86_TSC_DISABLE is not set
-
-#
-# General setup
-#
-CONFIG_NET=y
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_ISA=y
-# CONFIG_PCI_NAMES is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_HOTPLUG=y
-
-#
-# PCMCIA/CardBus support
-#
-CONFIG_PCMCIA=m
-CONFIG_CARDBUS=y
-# CONFIG_TCIC is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
-# CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_ELF_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_OOM_KILLER is not set
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# ACPI Support
-#
-# CONFIG_ACPI is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_GEN_PROBE is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_CFI_SSTSTD is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_AMDSTD is not set
-# CONFIG_MTD_SHARP is not set
-# CONFIG_MTD_JEDEC is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PNC2000 is not set
-# CONFIG_MTD_SC520CDP is not set
-# CONFIG_MTD_NETSC520 is not set
-# CONFIG_MTD_SBC_GXX is not set
-# CONFIG_MTD_ELAN_104NC is not set
-# CONFIG_MTD_DILNETPC is not set
-# CONFIG_MTD_MIXMEM is not set
-# CONFIG_MTD_OCTAGON is not set
-# CONFIG_MTD_VMAX is not set
-# CONFIG_MTD_SCx200_DOCFLASH is not set
-# CONFIG_MTD_L440GX is not set
-# CONFIG_MTD_AMD76XROM is not set
-# CONFIG_MTD_ICH2ROM is not set
-# CONFIG_MTD_NETtel is not set
-# CONFIG_MTD_SCB2_FLASH is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-CONFIG_MTD_BLKMTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC1000 is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOCPROBE is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play configuration
-#
-CONFIG_PNP=m
-CONFIG_ISAPNP=m
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_CISS_MONITOR_THREAD is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_BLK_STATS is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_FILTER is not set
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_NAT=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_TOS=y
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-
-#
-#   IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_IRC=y
-CONFIG_IP_NF_CT_ACCT=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_CT_PROTO_GRE=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-CONFIG_IP_NF_MMS=m
-CONFIG_IP_NF_RTSP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_QUOTA=m
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_CONDITION=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_UNCLEAN=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_LAYER7_MAXDATALEN=2048
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_MIRROR=m
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_H323=m
-CONFIG_IP_NF_NAT_PROTO_GRE=m
-CONFIG_IP_NF_NAT_MMS=m
-CONFIG_IP_NF_NAT_RTSP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_IMQ=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-#   IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-
-#
-#   IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_CONDITION=m
-CONFIG_IP6_NF_MATCH_MAC=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_TARGET_IMQ=m
-# CONFIG_KHTTPD is not set
-
-#
-#    SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_VLAN_8021Q=y
-
-#
-#  
-#
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-CONFIG_BRIDGE=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_CSZ=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_IPSEC_NAT_TRAVERSAL=y
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-# CONFIG_PHONE_IXJ_PCMCIA is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_BLK_DEV_GENERIC is not set
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_OFFBOARD=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_PCI_WIP is not set
-# CONFIG_BLK_DEV_ADMA100 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_WDC_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_AMD74XX_OVERRIDE is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_HPT34X_AUTODMA is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_PDC202XX_BURST is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-CONFIG_BLK_DEV_SC1200=y
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_IDEDMA_AUTO=y
-CONFIG_IDEDMA_IVB=y
-# CONFIG_DMA_NONPCI is not set
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
-# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-# CONFIG_BLK_DEV_ATARAID_SII is not set
-
-#
-# SCSI support
-#
-CONFIG_SCSI=m
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_SD_EXTRA_DEVS=5
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_DEBUG_QUEUES is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_MEGARAID2 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_DMA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NCR53C7xx is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_NCR53C8XX is not set
-# CONFIG_SCSI_SYM53C8XX is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_SEAGATE is not set
-# CONFIG_SCSI_SIM710 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_SCSI_PCMCIA is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_BOOT is not set
-# CONFIG_FUSION_ISENSE is not set
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LAN is not set
-
-#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-CONFIG_TUN=m
-CONFIG_NET_RANDOM=y
-# CONFIG_ETHERTAP is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_ELPLUS is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL3 is not set
-# CONFIG_3C515 is not set
-# CONFIG_ELMC is not set
-# CONFIG_ELMC_II is not set
-CONFIG_VORTEX=m
-# CONFIG_TYPHOON is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_DGRS is not set
-# CONFIG_DM9102 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_LNE390 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
-# CONFIG_NE2K_PCI is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_NE3210 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNDANCE_MMIO is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE_MPPC=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_STRIP is not set
-# CONFIG_WAVELAN is not set
-# CONFIG_ARLAN is not set
-# CONFIG_AIRONET4500 is not set
-# CONFIG_AIRONET4500_NONCS is not set
-# CONFIG_AIRONET4500_PROC is not set
-CONFIG_AIRO=m
-CONFIG_HERMES=m
-CONFIG_PLX_HERMES=m
-# CONFIG_TMD_HERMES is not set
-CONFIG_PCI_HERMES=m
-
-#
-# Wireless Pcmcia cards support
-#
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_ATMEL is not set
-
-#
-# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
-#
-CONFIG_PRISM54=m
-CONFIG_FW_LOADER=m
-CONFIG_NET_WIRELESS=y
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-CONFIG_SHAPER=m
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_ARCNET_COM20020_CS is not set
-# CONFIG_PCMCIA_IBMTR is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCMCIA_XIRTULIP is not set
-# CONFIG_NET_PCMCIA_RADIO is not set
-
-#
-# Amateur Radio support
-#
-CONFIG_HAMRADIO=y
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_NETROM is not set
-# CONFIG_ROSE is not set
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-# CONFIG_6PACK is not set
-# CONFIG_BPQETHER is not set
-# CONFIG_DMASCC is not set
-# CONFIG_SCC is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_SOUNDMODEM is not set
-# CONFIG_YAM is not set
-
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=128
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPMI_PANIC_EVENT is not set
-# CONFIG_IPMI_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_KCS is not set
-# CONFIG_IPMI_WATCHDOG is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_WAFER_WDT is not set
-# CONFIG_I810_TCO is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_60XX_WDT is not set
-CONFIG_SC1200_WDT=m
-CONFIG_SCx200_WDT=m
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_W83877F_WDT is not set
-# CONFIG_WDT is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_MACHZ_WDT is not set
-CONFIG_WD1100=m
-CONFIG_SCx200=m
-CONFIG_SCx200_GPIO=m
-# CONFIG_AMD_RNG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-
-#
-# Direct Rendering Manager (XFree86 DRI support)
-#
-# CONFIG_DRM is not set
-# CONFIG_MWAVE is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_PCMCIA_SERIAL_CS is not set
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_MWAVE is not set
-# CONFIG_OBMOUSE is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_QFMT_V2 is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-CONFIG_EXT3_FS=m
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-CONFIG_VFAT_FS=m
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_BBC_ARMLIB is not set
-# CONFIG_JFFS2_BBC_LZO is not set
-CONFIG_JFFS2_BBC_LZARI=y
-# CONFIG_JFFS2_BBC_LZHD is not set
-# CONFIG_JFFS2_BBC_LZSS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=m
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_TRACE is not set
-# CONFIG_XFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_SUNRPC=m
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SMB_NLS is not set
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-CONFIG_VIDEO_PROC_FS=y
-# CONFIG_I2C_PARPORT is not set
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_ZORAN_BUZ is not set
-# CONFIG_VIDEO_ZORAN_DC10 is not set
-# CONFIG_VIDEO_ZORAN_LML33 is not set
-# CONFIG_VIDEO_ZR36120 is not set
-# CONFIG_VIDEO_MEYE is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_MIROPCM20 is not set
-# CONFIG_RADIO_MIROPCM20_RDS is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_MIDI_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_MIDI_VIA82CXXX is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-# CONFIG_SOUND_WM97XX is not set
-
-#
-# USB support
-#
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_UHCI is not set
-CONFIG_USB_UHCI_ALT=m
-CONFIG_USB_OHCI=m
-# CONFIG_USB_SL811HS_ALT is not set
-# CONFIG_USB_SL811HS is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_AUDIO=m
-# CONFIG_USB_EMI26 is not set
-
-#
-#   USB Bluetooth can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_MIDI is not set
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# USB Human Interface Devices (HID)
-#
-# CONFIG_USB_HID is not set
-
-#
-#     Input core support is needed for USB HID input layer or HIDBP support
-#
-# CONFIG_USB_HIDINPUT is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-CONFIG_USB_PWC=m
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# USB Network adaptors
-#
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDCETHER is not set
-# CONFIG_USB_USBNET is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_BRLVGER is not set
-# CONFIG_USB_LCD is not set
-
-#
-# Support for USB gadgets
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-CONFIG_BLUEZ=m
-CONFIG_BLUEZ_L2CAP=m
-CONFIG_BLUEZ_SCO=m
-CONFIG_BLUEZ_RFCOMM=m
-CONFIG_BLUEZ_RFCOMM_TTY=y
-CONFIG_BLUEZ_BNEP=m
-CONFIG_BLUEZ_BNEP_MC_FILTER=y
-CONFIG_BLUEZ_BNEP_PROTO_FILTER=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BLUEZ_HCIUSB=m
-CONFIG_BLUEZ_HCIUSB_SCO=y
-CONFIG_BLUEZ_HCIUART=m
-CONFIG_BLUEZ_HCIUART_H4=y
-CONFIG_BLUEZ_HCIUART_BCSP=y
-CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y
-# CONFIG_BLUEZ_HCIBFUSB is not set
-# CONFIG_BLUEZ_HCIDTL1 is not set
-# CONFIG_BLUEZ_HCIBT3C is not set
-# CONFIG_BLUEZ_HCIBLUECARD is not set
-# CONFIG_BLUEZ_HCIBTUART is not set
-# CONFIG_BLUEZ_HCIVHCI is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=0
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_FW_LOADER=m
diff --git a/openwrt/target/linux/x86-2.4/patches/001-mgeode-cpu.patch b/openwrt/target/linux/x86-2.4/patches/001-mgeode-cpu.patch
deleted file mode 100644
index 662d4f263e..0000000000
--- a/openwrt/target/linux/x86-2.4/patches/001-mgeode-cpu.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-diff -Nur linux-2.4.29/arch/i386/Makefile linux-2.4.29_geode/arch/i386/Makefile
---- linux-2.4.29/arch/i386/Makefile	Wed Nov 17 12:54:21 2004
-+++ linux-2.4.29_geode/arch/i386/Makefile	Tue Feb 15 23:41:54 2005
-@@ -94,6 +94,10 @@
- CFLAGS += $(call check_gcc,-march=c3-2,-march=i686)
- endif
- 
-+ifdef CONFIG_MGEODE
-+CFLAGS += -march=i586
-+endif
-+
- # Disable unit-at-a-time mode, it makes gcc use a lot more stack
- # due to the lack of sharing of stacklots.
- CFLAGS += $(call check_gcc,-fno-unit-at-a-time,)
-diff -Nur linux-2.4.29/arch/i386/config.in linux-2.4.29_geode/arch/i386/config.in
---- linux-2.4.29/arch/i386/config.in	Wed Nov 17 12:54:21 2004
-+++ linux-2.4.29_geode/arch/i386/config.in	Tue Feb 15 23:41:54 2005
-@@ -42,6 +42,7 @@
- 	 Winchip-C6				CONFIG_MWINCHIPC6 \
- 	 Winchip-2				CONFIG_MWINCHIP2 \
- 	 Winchip-2A/Winchip-3			CONFIG_MWINCHIP3D \
-+	 MediaGX/Geode                          CONFIG_MGEODE \
- 	 CyrixIII/VIA-C3			CONFIG_MCYRIXIII \
- 	 VIA-C3-2				CONFIG_MVIAC3_2" Pentium-Pro
- #
-@@ -162,6 +163,14 @@
-    define_bool CONFIG_X86_ALIGNMENT_16 y
-    define_bool CONFIG_X86_USE_PPRO_CHECKSUM y
-    define_bool CONFIG_X86_F00F_WORKS_OK y
-+fi
-+if [ "$CONFIG_MGEODE" = "y" ]; then
-+   define_int  CONFIG_X86_L1_CACHE_SHIFT 5
-+   define_bool CONFIG_X86_USE_STRING_486 y
-+   define_bool CONFIG_X86_ALIGNMENT_16 y
-+   define_bool CONFIG_X86_TSC y
-+   define_bool CONFIG_X86_PPRO_FENCE y
-+   define_bool CONFIG_X86_OOSTORE y
- fi
- if [ "$CONFIG_MCRUSOE" = "y" ]; then
-    define_int  CONFIG_X86_L1_CACHE_SHIFT 5
diff --git a/openwrt/target/linux/x86-2.4/patches/002-wd1100.patch b/openwrt/target/linux/x86-2.4/patches/002-wd1100.patch
deleted file mode 100644
index 8cb2dbd04b..0000000000
--- a/openwrt/target/linux/x86-2.4/patches/002-wd1100.patch
+++ /dev/null
@@ -1,417 +0,0 @@
-diff -Nur linux-2.4.29/drivers/char/Config.in linux-2.4.29_geode/drivers/char/Config.in
---- linux-2.4.29/drivers/char/Config.in	Sun Aug  8 01:26:04 2004
-+++ linux-2.4.29_geode/drivers/char/Config.in	Tue Feb 15 23:41:54 2005
-@@ -270,6 +270,7 @@
-       fi
-    fi
-    tristate '  ZF MachZ Watchdog' CONFIG_MACHZ_WDT
-+   tristate '  Embedded NatSemi SC1x00 Watchdog' CONFIG_WD1100
-    if [ "$CONFIG_SGI_IP22" = "y" ]; then
-       dep_tristate '  Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
-    fi
-diff -Nur linux-2.4.29/drivers/char/Makefile linux-2.4.29_geode/drivers/char/Makefile
---- linux-2.4.29/drivers/char/Makefile	Sun Aug  8 01:26:04 2004
-+++ linux-2.4.29_geode/drivers/char/Makefile	Tue Feb 15 23:41:54 2005
-@@ -302,6 +302,7 @@
- obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
- obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
- obj-$(CONFIG_IB700_WDT) += ib700wdt.o
-+obj-$(CONFIG_WD1100) += wd1100.o
- obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
- obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
- obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
-diff -Nur linux-2.4.29/drivers/char/wd1100.c linux-2.4.29_geode/drivers/char/wd1100.c
---- linux-2.4.29/drivers/char/wd1100.c	Thu Jan  1 01:00:00 1970
-+++ linux-2.4.29_geode/drivers/char/wd1100.c	Tue Feb 15 23:41:54 2005
-@@ -0,0 +1,391 @@
-+/*
-+ *   National Semiconductor SC1x00 CPU watchdog driver
-+ *   Copyright (c) Inprimis Technologies 2002
-+ *
-+ *   by Mark Grosberg <markg@inprimis.com>
-+ *   and Rolando Goldman <rolandog@inprimis.com>
-+ *
-+ *   Minor changes by Kianusch Sayah Karadji <kianusch@sk-tech.net>
-+ *   ( Soekris net4801 Support, module-parameter )
-+ *
-+ *   This program is free software; you can redistribute it and/or
-+ *   modify it under the terms of the GNU General Public License
-+ *   as published by the Free Software Foundation; either version
-+ *   2 of the License, or (at your option) any later version.
-+ *   
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/fs.h>
-+#include <linux/mm.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/spinlock.h>
-+#include <linux/sysctl.h>
-+#include <linux/pci.h>
-+
-+/* 
-+ * Since the SC1100 is an x86 clone, we don't even bother with 
-+ * allowing other architectures to compile us.
-+ */
-+#ifndef CONFIG_X86
-+# error Sorry this driver is only for x86.
-+#endif
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+#include <asm/processor.h>
-+
-+/* #define DEBUG_WD1100 */
-+
-+static int proc_wd_timeout(ctl_table   *ctl, 
-+                           int          write,
-+                           struct file *file,
-+                           void        *buffer,
-+                           size_t      *lenp);
-+static int proc_wd_graceful(ctl_table   *ctl, 
-+                            int          write,
-+                            struct file *file,
-+                            void        *buffer,
-+                            size_t      *lenp);
-+                           
-+/* Register definitions */
-+
-+#define SC1100_F5_VENDOR_ID  0x100B
-+#define SC1100_F5_DEVICE_ID  0x0515   
-+
-+#define CPU_WDTO_REG    0x00 /* watchdog time out, 16 bit register */
-+#define CPU_WDCNFG_REG  0x02 /* watchdog config , 16 bit register */
-+#define CPU_WDSTS_REG   0x04 /* watchdog status , 8 bit register */
-+
-+/* Default timeout: 4 seconds (changeable via sysctl) */
-+static unsigned int    sysctl_wd_timeout  = 0;
-+static unsigned int    sysctl_wd_graceful = 0;
-+
-+static unsigned int    timeout  = 4;
-+static unsigned int    graceful = 1;
-+
-+MODULE_PARM (timeout,  "i");
-+MODULE_PARM (graceful, "i");
-+
-+static int             in_use    = 0;
-+static unsigned short  cpu_base;
-+static spinlock_t      wd_lock;
-+
-+/**************************************************************************/
-+
-+/* XXX To-do: DEV_WATCHDOG must be in include/linux/sysctl.h */
-+enum
-+{ DEV_WATCHDOG = 6 };
-+
-+enum
-+{
-+   DEV_WD_TIMEOUT   = 1,
-+   DEV_WD_GRACEFUL  = 2
-+};
-+
-+static struct ctl_table_header *wd_table_header;
-+
-+static ctl_table wd_table[] = {
-+   {
-+    DEV_WD_TIMEOUT, "timeout",
-+    &sysctl_wd_timeout, sizeof(int), 0644, NULL, &proc_wd_timeout
-+   },
-+   
-+   {
-+    DEV_WD_GRACEFUL, "graceful",
-+    &sysctl_wd_graceful, sizeof(int), 0644, NULL, &proc_wd_graceful
-+   },
-+
-+   {0}
-+};
-+
-+static ctl_table wd_dir_table[] = {
-+   {DEV_WATCHDOG, "wd", NULL, 0, 0555, wd_table},
-+   {0}
-+};
-+
-+static ctl_table wd_root_table[] = {
-+   {CTL_DEV, "dev", NULL, 0, 0555, wd_dir_table},
-+   {0}
-+};
-+
-+static int proc_wd_timeout(ctl_table   *ctl, 
-+                           int          write,
-+                           struct file *file,
-+                           void        *buffer,
-+                           size_t      *lenp)
-+{
-+  int   rc;
-+  
-+  rc = proc_dointvec(ctl, write, file, buffer, lenp);
-+  if (write && (rc == 0))
-+  {
-+     /* Clamp to limits. */
-+     if (sysctl_wd_timeout < 1) 
-+       sysctl_wd_timeout = 1;
-+     else if (sysctl_wd_timeout > 65535)
-+       sysctl_wd_timeout = 65535;
-+  }
-+  
-+  return (rc);
-+}
-+
-+static int proc_wd_graceful(ctl_table   *ctl, 
-+                            int          write,
-+                            struct file *file,
-+                            void        *buffer,
-+                            size_t      *lenp)
-+{
-+  int   rc;
-+  
-+  rc = proc_dointvec(ctl, write, file, buffer, lenp);
-+  if (write && (rc == 0))
-+  {
-+     /* Clamp to true/false. */
-+     if (sysctl_wd_graceful) 
-+       sysctl_wd_graceful = 1;
-+  }
-+  
-+  return (rc);
-+}                           
-+
-+/**************************************************************************/
-+
-+static __inline__ void reset_wd(void)
-+{
-+  outw(sysctl_wd_timeout * 8, cpu_base + CPU_WDTO_REG);
-+}
-+
-+static int reboot_reason(void)
-+{
-+   static int    result;
-+   static int    fetched = 0;
-+ 
-+   if (!fetched)
-+   {
-+     unsigned char sr;
-+     
-+     sr = inb(cpu_base + CPU_WDSTS_REG);
-+     outb(sr | 1, cpu_base + CPU_WDSTS_REG);
-+   
-+     fetched = 1;
-+   }
-+   
-+   return (result);
-+}
-+
-+static struct watchdog_info wd_info =
-+{
-+   0,   /* Options          */
-+   0,   /* Firmware version */
-+   "NSC SC1x00 WD"
-+};
-+
-+static int wd_ioctl(struct inode *inode, 
-+                    struct file  *file, 
-+                    unsigned int  cmd,
-+                    unsigned long arg)
-+{
-+   int  i;
-+   
-+   switch (cmd)
-+   {
-+      default:
-+        return (-ENOTTY);
-+        
-+      case WDIOC_GETSUPPORT:
-+        i = verify_area(VERIFY_WRITE, (void *)arg, sizeof(struct watchdog_info));
-+        if (i)
-+          return (i);
-+        else
-+          return copy_to_user((struct watchdog_info *)arg, 
-+                              &wd_info, 
-+                              sizeof(wd_info));
-+        break;
-+        
-+      case WDIOC_KEEPALIVE:
-+        reset_wd();
-+        return (0);
-+        
-+      case WDIOC_GETBOOTSTATUS:
-+        i = reboot_reason();
-+        return (put_user(i, (int *)arg));
-+        
-+      case WDIOC_GETSTATUS:
-+        i = inw(cpu_base + CPU_WDTO_REG) / 8;
-+        return (put_user(i, (int *)arg));
-+   }       
-+}                    
-+
-+static int wd_open(struct inode *inode, 
-+                   struct file  *file)
-+{
-+  spin_lock(&wd_lock);
-+  if (in_use)
-+  {
-+    spin_unlock(&wd_lock);
-+    return (-EBUSY);
-+  }
-+  else
-+    in_use++;
-+    
-+  spin_unlock(&wd_lock);
-+
-+  MOD_INC_USE_COUNT;
-+
-+  /*
-+   * Configure the chip to do a reset if the timer goes to 0.
-+   * Set the clock divisor to 4096.
-+   */
-+     
-+  outw(0xfc, cpu_base + CPU_WDCNFG_REG);
-+  
-+  /* Start the watchdog: It won't run until we write the TO reg. */
-+  reset_wd();
-+
-+  return (0);
-+}
-+
-+static int wd_release(struct inode *inode,
-+                       struct file  *file)
-+{
-+  spin_lock(&wd_lock);
-+    
-+  in_use = 0;
-+  
-+  /*
-+   * If graceful shutdown is not set, then don't bother to stop the
-+   * watchdog timer. This handles the scenario where the user process
-+   * that is poking the watchdog gets terminated due to some error
-+   * (say a SEGV or some VM condition). 
-+   *
-+   * In that case, the kernel would happily close the descriptor for
-+   * us and leave us in a state where we aren't watching the dog...
-+   *
-+   * To work around this, the "graceful" sysctl prevents reset of the
-+   * watchdog on close.
-+   */
-+  if (sysctl_wd_graceful)
-+    outw(0, cpu_base + CPU_WDCNFG_REG);
-+  
-+  spin_unlock(&wd_lock);
-+  MOD_DEC_USE_COUNT;
-+  
-+  return (0);
-+}           
-+
-+static ssize_t wd_write(struct file *file,
-+                        const char  *data,
-+                        size_t       len,
-+                        loff_t      *ppos)
-+{
-+  /* Device is non-seekable. */
-+  if (ppos != &file->f_pos)
-+    return (-ESPIPE);
-+  
-+  if (len > 0)
-+    reset_wd();   
-+  
-+  return (len);
-+}
-+
-+static struct file_operations wd_fops=
-+{
-+   owner:      THIS_MODULE,
-+   write:      wd_write,
-+   ioctl:      wd_ioctl,
-+   open:       wd_open,
-+   release:    wd_release,
-+};
-+ 
-+static struct miscdevice sc1x00wd_miscdev=
-+{
-+   WATCHDOG_MINOR,
-+   "watchdog",
-+   &wd_fops
-+};
-+
-+static int __init wd_init(void)
-+{
-+   int              ret;
-+   struct pci_dev  *dev;
-+   unsigned int     cw;
-+
-+   if (timeout < 1)
-+      timeout = 1;
-+   else if (timeout > 65535)
-+      timeout = 65535;
-+
-+   if (graceful != 0)
-+      graceful = 1;
-+
-+   sysctl_wd_timeout=timeout;
-+   sysctl_wd_graceful=graceful;
-+
-+   if ((strcmp(boot_cpu_data.x86_vendor_id, "Geode by NSC") != 0)
-+   ||  ((boot_cpu_data.x86_model  != 4) && boot_cpu_data.x86_model  != 9))
-+   {
-+      printk(KERN_WARNING "wd1100.c: This is not an SC1100 processor!\n");
-+      return (0);
-+   }
-+
-+   /* get the CONFIG BLOCK ADDRESS from scratch pad register */ 
-+   dev = pci_find_device(SC1100_F5_VENDOR_ID,SC1100_F5_DEVICE_ID,0);
-+   if (dev == NULL)
-+   {
-+     printk(KERN_ERR "wd1100.c: Can not find bridge device.\n");
-+     return (0);
-+   }
-+
-+   pci_read_config_dword(dev, 0x64, &cw);
-+   cpu_base = (unsigned short )cw;
-+  
-+#ifdef DEBUG_WD1100
-+   printk("wd1100.c: CPU base = 0x%X\n", (unsigned int )cpu_base);
-+#endif
-+
-+   printk(KERN_INFO "SC1x00 Watchdog driver by Inprimis Technolgies.\n");
-+   /*
-+    * We must call reboot_reason() to reset the flag in the WD.
-+    *
-+    * Even though it is available as an ioctl(), we call it during
-+    * module initialization to perform the clear. You can take out
-+    * the printk(), but don't take out the call to reboot_reason().
-+    */
-+   if (reboot_reason())
-+      printk(KERN_INFO "Last reboot was by watchdog!\n");
-+    
-+   spin_lock_init(&wd_lock);
-+        
-+   ret = misc_register(&sc1x00wd_miscdev);
-+   if (ret)
-+     printk(KERN_ERR "wd1100.c: Can't register device.\n");
-+   else
-+   {
-+     wd_table_header = register_sysctl_table(wd_root_table, 1); 
-+      if (wd_table_header == NULL)
-+        printk(KERN_ERR "wd1100.c: Can't register sysctl.\n");
-+   }
-+
-+   return 0;
-+}   
-+
-+static void __exit wd_exit(void)
-+{
-+   if (wd_table_header != NULL)
-+      unregister_sysctl_table(wd_table_header);
-+   
-+   misc_deregister(&sc1x00wd_miscdev);
-+}
-+
-+EXPORT_NO_SYMBOLS; 
-+
-+module_init(wd_init);
-+module_exit(wd_exit);
-+
-+MODULE_LICENSE("GPL");
-+
diff --git a/openwrt/target/linux/x86-2.4/patches/003-mgeode-pci.patch b/openwrt/target/linux/x86-2.4/patches/003-mgeode-pci.patch
deleted file mode 100644
index eb6594ec84..0000000000
--- a/openwrt/target/linux/x86-2.4/patches/003-mgeode-pci.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-diff -Nur linux-2.4.29/drivers/pci/pci.c linux-2.4.29_geode/drivers/pci/pci.c
---- linux-2.4.29/drivers/pci/pci.c	Wed Nov 17 12:54:21 2004
-+++ linux-2.4.29_geode/drivers/pci/pci.c	Tue Feb 15 23:41:54 2005
-@@ -1486,6 +1486,10 @@
- 	for (func = 0; func < 8; func++, temp->devfn++) {
- 		if (pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type))
- 			continue;
-+#ifdef CONFIG_MGEODE
-+		if (hdr_type & 0x7f > PCI_HEADER_TYPE_CARDBUS)
-+			continue;
-+#endif
- 		temp->hdr_type = hdr_type & 0x7f;
- 
- 		dev = pci_scan_device(temp);
diff --git a/openwrt/target/linux/x86-2.4/patches/004-export_memcmp.patch b/openwrt/target/linux/x86-2.4/patches/004-export_memcmp.patch
deleted file mode 100644
index 5c22a204c8..0000000000
--- a/openwrt/target/linux/x86-2.4/patches/004-export_memcmp.patch
+++ /dev/null
@@ -1,16 +0,0 @@
---- linux-2.4.32/arch/i386/kernel/i386_ksyms.c--	2006-02-26 11:11:42.000000000 +0100
-+++ linux-2.4.32/arch/i386/kernel/i386_ksyms.c	2006-02-26 11:11:45.000000000 +0100
-@@ -170,10 +170,13 @@
- 
- #undef memcpy
- #undef memset
-+#undef memcmp
- extern void * memset(void *,int,__kernel_size_t);
- extern void * memcpy(void *,const void *,__kernel_size_t);
-+extern int memcmp(const void *, const void *);
- EXPORT_SYMBOL_NOVERS(memcpy);
- EXPORT_SYMBOL_NOVERS(memset);
-+EXPORT_SYMBOL_NOVERS(memcmp);
- 
- #ifdef CONFIG_HAVE_DEC_LOCK
- EXPORT_SYMBOL(atomic_dec_and_lock);
diff --git a/openwrt/target/linux/x86-2.6/Makefile b/openwrt/target/linux/x86-2.6/Makefile
deleted file mode 100644
index 0d70b31190..0000000000
--- a/openwrt/target/linux/x86-2.6/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-LINUX_VERSION:=2.6.16.7
-LINUX_RELEASE:=1
-LINUX_KERNEL_MD5SUM:=9682b2bd6e02f3087982d7c3f5ba824e
-
-include ../rules.mk
-include ./config
-
-include ../generic-$(KERNEL)/modules.mk
-include ../kernel.mk
-
-
-$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
-	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
-	@$(CP) config $(LINUX_DIR)/.config
-	touch $@
-
-$(LINUX_BUILD_DIR)/bzImage: $(LINUX_DIR)/vmlinux
-	$(MAKE) -C $(LINUX_DIR) V=1 CROSS_COMPILE=$(TARGET_CROSS) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) bzImage $(MAKE_TRACE)
-	$(CP) $(LINUX_DIR)/arch/i386/boot/bzImage $@
-	touch $@
-
-compile: $(LINUX_BUILD_DIR)/bzImage
diff --git a/openwrt/target/linux/x86-2.6/config b/openwrt/target/linux/x86-2.6/config
deleted file mode 100644
index 8bd2cee89c..0000000000
--- a/openwrt/target/linux/x86-2.6/config
+++ /dev/null
@@ -1,2037 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Tue Mar 21 10:24:36 2006
-#
-CONFIG_X86_32=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_X86=y
-CONFIG_MMU=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_DMI=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-# CONFIG_VM86 is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_X86_PC=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
-# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-CONFIG_MGEODEGX1=y
-# CONFIG_MGEODE_LX is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_X86_GENERIC is not set
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_XADD=y
-CONFIG_X86_L1_CACHE_SHIFT=4
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_X86_PPRO_FENCE=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_ALIGNMENT_16=y
-CONFIG_X86_TSC=y
-# CONFIG_HPET_TIMER is not set
-CONFIG_SCx200HR_TIMER=y
-# CONFIG_SMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_X86_UP_APIC is not set
-# CONFIG_X86_MCE is not set
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_CPUID is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_EDD is not set
-# CONFIG_DELL_RBU is not set
-# CONFIG_DCDBAS is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_MTRR is not set
-# CONFIG_REGPARM is not set
-# CONFIG_SECCOMP is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-# CONFIG_KEXEC is not set
-CONFIG_PHYSICAL_START=0x100000
-CONFIG_DOUBLEFAULT=y
-
-#
-# Power management options (ACPI, APM)
-#
-# CONFIG_PM is not set
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
-# CONFIG_ACPI is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-
-#
-# CPUFreq processor drivers
-#
-# CONFIG_X86_POWERNOW_K6 is not set
-# CONFIG_X86_POWERNOW_K7 is not set
-# CONFIG_X86_POWERNOW_K8 is not set
-CONFIG_X86_GX_SUSPMOD=m
-# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
-# CONFIG_X86_SPEEDSTEP_ICH is not set
-# CONFIG_X86_SPEEDSTEP_SMI is not set
-# CONFIG_X86_P4_CLOCKMOD is not set
-# CONFIG_X86_CPUFREQ_NFORCE2 is not set
-# CONFIG_X86_LONGRUN is not set
-# CONFIG_X86_LONGHAUL is not set
-
-#
-# shared options
-#
-# CONFIG_X86_SPEEDSTEP_LIB is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_ISA_DMA_API=y
-CONFIG_ISA=y
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_SCx200=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_IPSEC_NAT_TRAVERSAL=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_BRIDGE_NETFILTER is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
-CONFIG_IP_NF_NETBIOS_NS=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_SIP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_MATCH_POLICY is not set
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_IMQ=m
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_TTL=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-# CONFIG_IP6_NF_MATCH_POLICY is not set
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_IMQ=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_DCCP_CCID3=m
-CONFIG_IP_DCCP_TFRC_LIB=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_ATM_BR2684_IPFILTER=y
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-# CONFIG_NET_SCH_ATM is not set
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_ESFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_NETROM is not set
-# CONFIG_ROSE is not set
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-# CONFIG_6PACK is not set
-# CONFIG_BPQETHER is not set
-# CONFIG_DMASCC is not set
-# CONFIG_SCC is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_YAM is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_TS5500 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-CONFIG_MTD_BLKMTD=y
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_ISAPNP=y
-# CONFIG_PNPBIOS is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-CONFIG_BLK_DEV_SC1200=y
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-# CONFIG_IMQ_BEHAVIOR_AA is not set
-# CONFIG_IMQ_BEHAVIOR_AB is not set
-CONFIG_IMQ_BEHAVIOR_BA=y
-# CONFIG_IMQ_BEHAVIOR_BB is not set
-CONFIG_IMQ_NUM_DEVS=2
-CONFIG_TUN=m
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_ELPLUS is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL3 is not set
-# CONFIG_3C515 is not set
-CONFIG_VORTEX=m
-# CONFIG_TYPHOON is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=m
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-CONFIG_SIS190=m
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_AIRO=m
-CONFIG_HERMES=m
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-# CONFIG_NORTEL_HERMES is not set
-CONFIG_PCI_HERMES=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_PCMCIA_SPECTRUM is not set
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_ATMEL=m
-# CONFIG_PCMCIA_WL3501 is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-CONFIG_PRISM54=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_HOSTAP_CS=m
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_PPPOATM is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_WAFER_WDT is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_I8XX_TCO is not set
-CONFIG_SC1200_WDT=m
-CONFIG_SCx200_WDT=m
-# CONFIG_60XX_WDT is not set
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_CPU5_WDT is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_NVRAM=y
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_MWAVE is not set
-CONFIG_SCx200_GPIO=m
-# CONFIG_CS5535_GPIO is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-CONFIG_SCx200_I2C=m
-CONFIG_SCx200_I2C_SCL=12
-CONFIG_SCx200_I2C_SDA=13
-CONFIG_SCx200_ACB=m
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-# CONFIG_IBM_ASM is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_VIDEO_AUDIO_DECODER is not set
-# CONFIG_VIDEO_DECODER is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ISA devices
-#
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4232 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_DT019X is not set
-# CONFIG_SND_ES968 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_WAVEFRONT is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_USX2Y is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=m
-CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-# CONFIG_USB_ATM is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-# CONFIG_EDAC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_VMALLOC is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_EARLY_PRINTK=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_AES_586=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-# CONFIG_CRYPTO_DEV_PADLOCK is not set
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_X86_BIOS_REBOOT=y
-CONFIG_KTIME_SCALAR=y
diff --git a/openwrt/target/linux/x86-2.6/patches/scx200-hr-timer-2.6.12-rc6-6.diff b/openwrt/target/linux/x86-2.6/patches/scx200-hr-timer-2.6.12-rc6-6.diff
deleted file mode 100644
index 38fc16a74c..0000000000
--- a/openwrt/target/linux/x86-2.6/patches/scx200-hr-timer-2.6.12-rc6-6.diff
+++ /dev/null
@@ -1,320 +0,0 @@
-SCx200 High Resolution Timer Patch for Linux 2.6
-http://www.gnusto.com/scx200-hr-timer.html
-
-diff -Naurp linux-2.6.12-rc6.orig/arch/i386/Kconfig linux-2.6.12-rc6/arch/i386/Kconfig
---- linux-2.6.12-rc6.orig/arch/i386/Kconfig	2005-06-07 14:56:02.000000000 +0100
-+++ linux-2.6.12-rc6/arch/i386/Kconfig	2005-06-07 16:43:19.000000000 +0100
-@@ -458,6 +458,17 @@ config HPET_EMULATE_RTC
- 	bool "Provide RTC interrupt"
- 	depends on HPET_TIMER && RTC=y
- 
-+config SCx200HR_TIMER
-+	bool "NatSemi SCx200 27MHz High-Resolution Timer Support"
-+	help
-+	  Some of the AMD (formerly National Semiconductor) Geode
-+	  processors, notably the SC1100, suffer from a buggy time
-+	  stamp counter which causes them to lose time when the
-+	  processor is sleeping.  Enable this option to use the
-+	  on-board 27Mz high-resolution timer to keep time instead.
-+	depends on (SCx200)
-+	default n
-+
- config SMP
- 	bool "Symmetric multi-processing support"
- 	---help---
-diff -Naurp linux-2.6.12-rc6.orig/arch/i386/kernel/scx200.c linux-2.6.12-rc6/arch/i386/kernel/scx200.c
---- linux-2.6.12-rc6.orig/arch/i386/kernel/scx200.c	2005-06-07 14:56:02.000000000 +0100
-+++ linux-2.6.12-rc6/arch/i386/kernel/scx200.c	2005-06-07 16:43:19.000000000 +0100
-@@ -27,6 +27,10 @@ long scx200_gpio_shadow[2];
- 
- unsigned scx200_cb_base = 0;
- 
-+#ifdef CONFIG_SCx200HR_TIMER
-+extern void __devinit scx200hr_timer_enable(void);
-+#endif
-+
- static struct pci_device_id scx200_tbl[] = {
- 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
-@@ -83,6 +87,9 @@ static int __devinit scx200_probe(struct
- 		printk(KERN_INFO NAME ": Configuration Block base 0x%x\n", scx200_cb_base);
- 	}
- 
-+#ifdef CONFIG_SCx200HR_TIMER
-+	scx200hr_timer_enable();
-+#endif
- 	return 0;
- }
- 
-diff -Naurp linux-2.6.12-rc6.orig/arch/i386/kernel/timers/Makefile linux-2.6.12-rc6/arch/i386/kernel/timers/Makefile
---- linux-2.6.12-rc6.orig/arch/i386/kernel/timers/Makefile	2004-03-11 18:21:13.000000000 +0000
-+++ linux-2.6.12-rc6/arch/i386/kernel/timers/Makefile	2005-06-07 16:43:19.000000000 +0100
-@@ -5,5 +5,6 @@
- obj-y := timer.o timer_none.o timer_tsc.o timer_pit.o common.o
- 
- obj-$(CONFIG_X86_CYCLONE_TIMER)	+= timer_cyclone.o
-+obj-$(CONFIG_SCx200HR_TIMER)	+= timer_scx200hr.o
- obj-$(CONFIG_HPET_TIMER)	+= timer_hpet.o
- obj-$(CONFIG_X86_PM_TIMER)	+= timer_pm.o
-diff -Naurp linux-2.6.12-rc6.orig/arch/i386/kernel/timers/timer.c linux-2.6.12-rc6/arch/i386/kernel/timers/timer.c
---- linux-2.6.12-rc6.orig/arch/i386/kernel/timers/timer.c	2004-12-26 14:07:37.000000000 +0000
-+++ linux-2.6.12-rc6/arch/i386/kernel/timers/timer.c	2005-06-07 16:43:19.000000000 +0100
-@@ -13,6 +13,9 @@
- #endif
- /* list of timers, ordered by preference, NULL terminated */
- static struct init_timer_opts* __initdata timers[] = {
-+#ifdef CONFIG_SCx200HR_TIMER
-+	&timer_scx200hr_init,
-+#endif
- #ifdef CONFIG_X86_CYCLONE_TIMER
- 	&timer_cyclone_init,
- #endif
-diff -Naurp linux-2.6.12-rc6.orig/arch/i386/kernel/timers/timer_scx200hr.c linux-2.6.12-rc6/arch/i386/kernel/timers/timer_scx200hr.c
---- linux-2.6.12-rc6.orig/arch/i386/kernel/timers/timer_scx200hr.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12-rc6/arch/i386/kernel/timers/timer_scx200hr.c	2005-06-07 16:43:19.000000000 +0100
-@@ -0,0 +1,220 @@
-+/*
-+ * Copyright (C) 2005 Ted Phelps
-+ *
-+ * This is a clock driver for the Geode SCx200's 27MHz high-resolution
-+ * timer as the system clock replacing its buggy time stamp counter.
-+ *
-+ * Based on parts of timer_hpet.c, timer_tsc.c and timer_pit.c.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ */
-+
-+#include <asm/timer.h>
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+#include <linux/seq_file.h>
-+#include <linux/scx200.h>
-+
-+#define NAME "scx200hr"
-+
-+/* Read the clock */
-+#define SCx200HR_CLOCK() inl(scx200_cb_base + SCx200_TIMER_OFFSET)
-+
-+/* High-resolution timer configuration address */
-+#define SCx200_TMCNFG_OFFSET (SCx200_TIMER_OFFSET + 5)
-+
-+/* Set this bit to disable the 27 MHz input clock */
-+#define HR_TM27MPD (1 << 2)
-+
-+/* Set this bit to update the count-up timer once per cycle of the
-+ * 27MHz timer, clear it to update the timer once every 27 cycles
-+ * (effectively producing a 1MHz counter) */
-+#define HR_TMCLKSEL (1 << 1)
-+
-+/* Set this bit to enable the high-resolution timer interrupt */
-+#define HR_TMEN (1 << 0)
-+
-+/* The frequency of the timer.	Change this to 27000000 and set
-+ * HR_TMCLKSEL in scx200hr_enable to run at the faster clock rate.  At
-+ * this point in time there is no point in doing so since times are
-+ * recorded in usec except for the monotonic clock, which is only used
-+ * by the hangcheck-timer. */
-+#define HR_FREQ 1000000
-+
-+/* The number of cycles of the high-resolution timer we expect to see
-+ * in a single tick.  Note that the result is <<8 for greater precision*/
-+#define HR_CYCLES_PER_TICK \
-+    (SH_DIV(HR_FREQ / 1000000 * TICK_NSEC, 1000, 8))
-+
-+/* The number of cycles of the high-resolution timer we expect to see
-+ * in one microsecond, <<8 */
-+#define HR_CYCLES_PER_US ((HR_FREQ / 1000000) << 8)
-+
-+
-+/* The value of the timer at the last interrupt */
-+static u32 clock_at_last_interrupt;
-+
-+/* The number of high-resolution clock cycles beyond what we would
-+ have expected that the last tick occurred, <<8 for greater precision */
-+static long clock_delay;
-+
-+/* The total number of timer nanoseconds between the time the timer
-+ * went live and the most recent tick. */
-+static unsigned long long total_ns;
-+
-+/* A lock to guard access to the monotonic clock-related variables
-+ * (total_ns and clocal_at_last_interrupt).  Note that these are also
-+ * protected by the xtime lock. */
-+static seqlock_t hr_lock = SEQLOCK_UNLOCKED;
-+
-+/* Nonzero if the timer has been selected */
-+static int enable_scx200hr;
-+
-+static int __init scx200hr_init(char *override)
-+{
-+	/* Watch for a command-line clock= override */
-+	if (override[0] && strncmp(override, NAME, sizeof(NAME) - 1) != 0) {
-+		return -ENODEV;
-+	}
-+
-+        /* Note that we should try to enable this timer once the
-+         * configuration block address is known */
-+        printk(KERN_WARNING NAME ": timer not yet accessible; will probe later.\n");
-+	enable_scx200hr = 1;
-+	return -EAGAIN;
-+}
-+
-+/* Called by the timer interrupt.  The xtime_lock will be held. */
-+static void mark_offset_scx200hr(void)
-+{
-+	u32 now, delta;
-+
-+	/* Avoid races between the interrupt handler and monotonic_clock */
-+	write_seqlock(&hr_lock);
-+
-+	/* Determine how many cycles have elapsed since the last interrupt */
-+	now = SCx200HR_CLOCK();
-+	delta = (now - clock_at_last_interrupt) << 8;
-+	clock_at_last_interrupt = now;
-+
-+	/* Update the total us count and remainder */
-+	total_ns += (delta * 1000) / HR_CYCLES_PER_US;
-+
-+	/* The monotonic clock is safe now */
-+	write_sequnlock(&hr_lock);
-+
-+	/* Adjust for interrupt handling delay */
-+	delta += clock_delay;
-+
-+	/* The high-resolution timer is driven by a different crystal
-+	 * to the main CPU, so there's no guarantee that the 1KHz
-+	 * interrupt rate will coincide with the timer.  This keeps
-+	 * the jiffies count in line with the high-resolution timer,
-+	 * which makes it possible for NTP to do its magic */
-+	if (delta < HR_CYCLES_PER_TICK) {
-+#if 1
-+		/* Didn't go over 1000us: decrement jiffies to balance
-+		 * out increment in do_timer.  This will cause some
-+		 * jitter if the frequency offset is large, as that
-+		 * adjustment will be applied about 1ms late. */
-+		jiffies_64--;
-+		clock_delay = delta;
-+#else /* !1 */
-+                clock_delay = 0;
-+#endif /* 1 */
-+	} else if (delta < (HR_CYCLES_PER_TICK << 1) + (HR_CYCLES_PER_TICK >> 1)) {
-+		clock_delay = delta - HR_CYCLES_PER_TICK;
-+	} else {
-+		jiffies_64 += delta / HR_CYCLES_PER_TICK - 2;
-+		clock_delay = HR_CYCLES_PER_TICK + delta % HR_CYCLES_PER_TICK;
-+	}
-+}
-+
-+/* Called by gettimeofday().  Returns the number of microseconds since
-+ * the last interrupt.	This is called with the xtime_lock held.*/
-+static unsigned long get_offset_scx200hr(void)
-+{
-+	u32 delta;
-+
-+	/* Get the time now and determine how many cycles have
-+	 * transpired since the interrupt, adjusting for timer
-+	 * interrupt jitter. */
-+	delta = ((SCx200HR_CLOCK() - clock_at_last_interrupt) << 8) + clock_delay;
-+
-+	/* Convert from cycles<<8 to microseconds */
-+	return delta / HR_CYCLES_PER_US;
-+}
-+
-+/* Returns the number of nanoseconds since the init of the timer. */
-+static unsigned long long monotonic_clock_scx200hr(void)
-+{
-+	u32 delta, seq;
-+	unsigned long long ns;
-+
-+	/* This function is *not* called with xtime_lock held, so we
-+	 * need to get the hr_lock to ensure we're not competing with
-+	 * mark_offset_scx200hr. */
-+	do {
-+		seq = read_seqbegin(&hr_lock);
-+		ns = total_ns;
-+		delta = SCx200HR_CLOCK() - clock_at_last_interrupt;
-+	} while (read_seqretry(&hr_lock, seq));
-+
-+	/* Convert cycles to microseconds and add. */
-+	return ns + delta * 1000 / HR_CYCLES_PER_US;
-+}
-+
-+/* scx200hr timer_opts struct */
-+struct timer_opts timer_scx200hr = {
-+	.name = NAME,
-+	.mark_offset = mark_offset_scx200hr, 
-+	.get_offset = get_offset_scx200hr,
-+	.monotonic_clock = monotonic_clock_scx200hr,
-+	.delay = NULL
-+};
-+
-+/* And the init_timer struct */
-+struct init_timer_opts __devinitdata timer_scx200hr_init = {
-+	.init = scx200hr_init,
-+	.opts = &timer_scx200hr
-+};
-+
-+
-+/* Switch from the original timer to the high-resolution timer */
-+void __devinit scx200hr_timer_enable(void)
-+{
-+        /* Make sure the timer was requested and that the
-+         * configuration block is present */
-+	if (!enable_scx200hr || !scx200_cb_present()) {
-+		return;
-+	}
-+
-+	/* Reserve the timer region for ourselves */
-+	if (!request_region(scx200_cb_base + SCx200_TIMER_OFFSET,
-+			    SCx200_TIMER_SIZE,
-+			    "NatSemi SCx200 High-Resolution Timer")) {
-+		printk(KERN_WARNING NAME ": unable to lock timer region\n");
-+		return;
-+	}
-+
-+	/* Configure the timer */
-+	outb(0, scx200_cb_base + SCx200_TMCNFG_OFFSET);
-+
-+	/* Record the current value of the timer. */
-+	clock_at_last_interrupt = SCx200HR_CLOCK();
-+
-+        /* Get the current value of the monotonic clock */
-+	total_ns = cur_timer->monotonic_clock();
-+
-+        /* Switch from the original timer functions to ours, but keep
-+         * the current delay function since loops_per_jiffy will have
-+         * been computed using that */
-+        timer_scx200hr.delay = cur_timer->delay;
-+	cur_timer = &timer_scx200hr;
-+
-+	printk(KERN_INFO "switching to scx200 high-resolution timer (%lu cpt)\n",
-+                HR_CYCLES_PER_TICK);
-+}
-diff -Naurp linux-2.6.12-rc6.orig/include/asm-i386/timer.h linux-2.6.12-rc6/include/asm-i386/timer.h
---- linux-2.6.12-rc6.orig/include/asm-i386/timer.h	2005-06-07 14:56:11.000000000 +0100
-+++ linux-2.6.12-rc6/include/asm-i386/timer.h	2005-06-07 16:43:19.000000000 +0100
-@@ -50,6 +50,9 @@ extern struct init_timer_opts timer_tsc_
- #ifdef CONFIG_X86_CYCLONE_TIMER
- extern struct init_timer_opts timer_cyclone_init;
- #endif
-+#ifdef CONFIG_SCx200HR_TIMER
-+extern struct init_timer_opts timer_scx200hr_init;
-+#endif
- 
- extern unsigned long calibrate_tsc(void);
- extern void init_cpu_khz(void);
-diff -Naurp linux-2.6.12-rc6.orig/include/linux/scx200.h linux-2.6.12-rc6/include/linux/scx200.h
---- linux-2.6.12-rc6.orig/include/linux/scx200.h	2005-06-07 14:56:11.000000000 +0100
-+++ linux-2.6.12-rc6/include/linux/scx200.h	2005-06-07 16:43:19.000000000 +0100
-@@ -32,7 +32,7 @@ extern unsigned scx200_cb_base;
- 
- /* High Resolution Timer */
- #define SCx200_TIMER_OFFSET 0x08
--#define SCx200_TIMER_SIZE 0x05
-+#define SCx200_TIMER_SIZE 0x06
- 
- /* Clock Generators */
- #define SCx200_CLOCKGEN_OFFSET 0x10
diff --git a/openwrt/target/linux/xscale-2.6/Makefile b/openwrt/target/linux/xscale-2.6/Makefile
deleted file mode 100644
index 01d6295a29..0000000000
--- a/openwrt/target/linux/xscale-2.6/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-LINUX_VERSION:=2.6.16.7
-LINUX_RELEASE:=1
-LINUX_KERNEL_MD5SUM:=9682b2bd6e02f3087982d7c3f5ba824e
-
-include ../rules.mk
-include ./config
-
-include ../generic-$(KERNEL)/modules.mk
-include ../kernel.mk
-
-
-$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
-	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
-	@$(CP) config $(LINUX_DIR)/.config
-	touch $@
diff --git a/openwrt/target/linux/xscale-2.6/config b/openwrt/target/linux/xscale-2.6/config
deleted file mode 100644
index f908945f1d..0000000000
--- a/openwrt/target/linux/xscale-2.6/config
+++ /dev/null
@@ -1,1363 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.4
-# Mon Apr 17 16:00:49 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-# CONFIG_MACH_NSLU2 is not set
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-CONFIG_MACH_GATEWAY7001=y
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_NAS100D is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-# CONFIG_IXP4XX_INDIRECT_PCI is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_ASK_IP_FIB_HASH is not set
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IPSEC_NAT_TRAVERSAL=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-CONFIG_TCP_CONG_ADVANCED=y
-
-#
-# TCP congestion control
-#
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=m
-CONFIG_TCP_CONG_WESTWOOD=y
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-CONFIG_TCP_CONG_VEGAS=m
-# CONFIG_TCP_CONG_SCALABLE is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
-# CONFIG_IP_NF_NETBIOS_NS is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_SIP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_TIME is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_MATCH_POLICY is not set
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_IMQ=m
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_DSCP is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_SET is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_POLICY is not set
-CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
-CONFIG_IP6_NF_TARGET_REJECT=m
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_ESFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-# CONFIG_IMQ_BEHAVIOR_AA is not set
-# CONFIG_IMQ_BEHAVIOR_AB is not set
-CONFIG_IMQ_BEHAVIOR_BA=y
-# CONFIG_IMQ_BEHAVIOR_BB is not set
-CONFIG_IMQ_NUM_DEVS=2
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-# CONFIG_IPW2200_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_BANDWIDTH=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/openwrt/target/linux/xscale-2.6/patches/001-gateway_7001.patch b/openwrt/target/linux/xscale-2.6/patches/001-gateway_7001.patch
deleted file mode 100644
index 8942679000..0000000000
--- a/openwrt/target/linux/xscale-2.6/patches/001-gateway_7001.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-diff -Nur linux-2.6.16.4/arch/arm/boot/compressed/head-xscale.S linux-2.6.16.4-owrt/arch/arm/boot/compressed/head-xscale.S
---- linux-2.6.16.4/arch/arm/boot/compressed/head-xscale.S	2006-04-11 19:19:28.000000000 +0200
-+++ linux-2.6.16.4-owrt/arch/arm/boot/compressed/head-xscale.S	2006-04-16 16:51:05.000000000 +0200
-@@ -47,6 +47,11 @@
-                orr     r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
- #endif
- 
-+#ifdef  CONFIG_MACH_GATEWAY7001
-+               mov     r7, #(MACH_TYPE_GATEWAY7001 & 0xff)
-+               orr     r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00)
-+#endif
-+
- #ifdef CONFIG_ARCH_IXP2000
- 		mov	r1, #-1
- 		mov	r0, #0xd6000000
-diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c
---- linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-pci.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c	2006-04-17 19:21:55.000000000 +0200
-@@ -0,0 +1,67 @@
-+/*
-+ * arch/arch/mach-ixp4xx/gateway7001-pci.c
-+ *
-+ * PCI setup routines for Gateway 7001
-+ *
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ *	Copyright (C) 2002 Jungo Software Technologies.
-+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init gateway7001_pci_preinit(void)
-+{
-+	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	if (slot == 0)
-+		return IRQ_IXP4XX_GPIO10;
-+	else if (slot == 1)
-+		return IRQ_IXP4XX_GPIO11;
-+	else return -1;
-+}
-+
-+struct hw_pci gateway7001_pci __initdata = {
-+	.nr_controllers = 1,
-+	.preinit =        gateway7001_pci_preinit,
-+	.swizzle =        pci_std_swizzle,
-+	.setup =          ixp4xx_setup,
-+	.scan =           ixp4xx_scan_bus,
-+	.map_irq =        gateway7001_map_irq,
-+};
-+
-+int __init gateway7001_pci_init(void)
-+{
-+	if (machine_is_gateway7001())
-+		pci_common_init(&gateway7001_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(gateway7001_pci_init);
-diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/Kconfig linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Kconfig
---- linux-2.6.16.4/arch/arm/mach-ixp4xx/Kconfig	2006-04-11 19:19:28.000000000 +0200
-+++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Kconfig	2006-04-16 15:58:37.000000000 +0200
-@@ -30,6 +30,13 @@
- 	  Engineering Coyote Gateway Reference Platform. For more
- 	  information on this platform, see <file:Documentation/arm/IXP4xx>.
- 
-+config MACH_GATEWAY7001
-+	bool "Gateway 7001"
-+	help
-+	  Say 'Y' here if you want your kernel to support Gateway's 
-+	  7001 Access Point. For more information on this platform,
-+	  see http://openwrt.org
-+
- config ARCH_IXDP425
- 	bool "IXDP425"
- 	help
-diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/Makefile linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Makefile
---- linux-2.6.16.4/arch/arm/mach-ixp4xx/Makefile	2006-04-11 19:19:28.000000000 +0200
-+++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Makefile	2006-04-16 16:03:42.000000000 +0200
-@@ -10,4 +10,5 @@
- obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o
- obj-$(CONFIG_MACH_NAS100D)	+= nas100d-pci.o nas100d-setup.o nas100d-power.o
-+obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o coyote-setup.o
- 
-diff -Nur linux-2.6.16.4/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
---- linux-2.6.16.4/include/asm-arm/arch-ixp4xx/uncompress.h	2006-04-11 19:19:28.000000000 +0200
-+++ linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/uncompress.h	2006-04-16 16:25:34.000000000 +0200
-@@ -48,7 +48,7 @@
- 	/*
- 	 * Coyote and gtwx5715 only have UART2 connected
- 	 */
--	if (machine_is_adi_coyote() || machine_is_gtwx5715())
-+	if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
- 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- 	else
- 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
-diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/coyote-setup.c
---- linux-2.6.16.4/arch/arm/mach-ixp4xx/coyote-setup.c	2006-04-11 19:19:28.000000000 +0200
-+++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/coyote-setup.c	2006-04-16 16:03:23.000000000 +0200
-@@ -1,9 +1,10 @@
- /*
-  * arch/arm/mach-ixp4xx/coyote-setup.c
-  *
-- * Board setup for ADI Engineering and IXDGP425 boards
-+ * Board setup for ADI Engineering, IXDGP425 and Gateway 7001 boards
-  *
-  * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org>
-  *
-  * Author: Deepak Saxena <dsaxena@plexity.net>
-  */
-@@ -111,6 +112,19 @@
- MACHINE_END
- #endif
- 
-+#ifdef CONFIG_MACH_GATEWAY7001
-+MACHINE_START(GATEWAY7001, "Gateway 7001")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.timer		= &ixp4xx_timer,
-+	.boot_params	= 0x0100,
-+	.init_machine	= coyote_init,
-+MACHINE_END
-+#endif
-+
- /*
-  * IXDPG425 is identical to Coyote except for which serial port
-  * is connected.