aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorThibaut VARENE <hacks@slashdirt.org>2017-02-10 20:36:50 +0100
committerFelix Fietkau <nbd@nbd.name>2017-02-15 11:28:59 +0100
commit748e701b74f22d50dfb4d46ad5a8d0003c2c8b0f (patch)
tree9d8207121045a7cc1190282635a812c51f14f156 /target
parentb8004532825c9edaafa2fa5b5aa54994b80adddf (diff)
downloadupstream-748e701b74f22d50dfb4d46ad5a8d0003c2c8b0f.tar.gz
upstream-748e701b74f22d50dfb4d46ad5a8d0003c2c8b0f.tar.bz2
upstream-748e701b74f22d50dfb4d46ad5a8d0003c2c8b0f.zip
ar71xx: add preliminary kernel support for several RB SPI NOR devices
The cAP 2nD, mAP 2nD and wAP 2nD apparently all share the same QCA953x/SPI-NOR platform. This patch adds preliminary kernel support based on init data used in Mikrotik's linux-3.3.5 kernel patch. Since this is totally experimental and untested, the necessary glue in base-files has not been added, the code is provided as a starting point in case somebody with that hardware wants to help getting it supported. The cAP lite (cAPL 2nD) should also be supported once it is determined whether or not it uses the same board identifier as the mAP lite. Code has been successfully built and has no side effect (no impact on already supported devices). Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
Diffstat (limited to 'target')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt3
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c178
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h3
3 files changed, 184 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index bc06481e39..4c00ea5a95 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -931,6 +931,9 @@ config ATH79_MACH_RBSPI
MikroTik RouterBOARD hAP
MikroTik RouterBOARD hEX PoE lite
MikroTik RouterBOARD hEX lite
+ MikroTik RouterBOARD cAP (EXPERIMENTAL)
+ MikroTik RouterBOARD mAP (EXPERIMENTAL)
+ MikroTik RouterBOARD wAP (EXPERIMENTAL)
config ATH79_MACH_RBSXTLITE
bool "MikroTik RouterBOARD SXT Lite"
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
index c0b27190fe..b6b3338845 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
@@ -7,6 +7,14 @@
* - MikroTik RouterBOARD 750UP r2
* - MikroTik RouterBOARD 750 r2
*
+ * Preliminary support for the following hardware
+ * - MikroTik RouterBOARD wAP2nD
+ * - MikroTik RouterBOARD cAP2nD
+ * - MikroTik RouterBOARD mAP2nD
+ * Furthermore, the cAP lite (cAPL2nD) appears to feature the exact same
+ * hardware as the mAP L-2nD. It is unknown if they share the same board
+ * identifier.
+ *
* Copyright (C) 2017 Thibaut VARENE <varenet@parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify it
@@ -189,6 +197,7 @@ static struct gpio_led rbhapl_leds[] __initdata = {
#define RB952_GPIO_SSR_CS 11
#define RB952_GPIO_LED_USER 4
#define RB952_GPIO_POE_POWER 14
+#define RB952_GPIO_POE_STATUS 12
#define RB952_GPIO_USB_POWER RBSPI_SSR_GPIO(RB952_SSR_BIT_USB_POWER)
#define RB952_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN1)
#define RB952_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN2)
@@ -229,6 +238,103 @@ static struct gpio_led rb952_leds[] __initdata = {
},
};
+/* RB wAP-2nD gpios */
+#define RBWAP_GPIO_LED_USER 14
+#define RBWAP_GPIO_LED_WLAN 11
+
+static struct gpio_led rbwap_leds[] __initdata = {
+ {
+ .name = "rb:green:user",
+ .gpio = RBWAP_GPIO_LED_USER,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:wlan",
+ .gpio = RBWAP_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+};
+
+/* RB cAP-2nD gpios */
+#define RBCAP_GPIO_LED_1 14
+#define RBCAP_GPIO_LED_2 12
+#define RBCAP_GPIO_LED_3 11
+#define RBCAP_GPIO_LED_4 4
+#define RBCAP_GPIO_LED_ALL 13
+
+static struct gpio_led rbcap_leds[] __initdata = {
+ {
+ .name = "rb:green:rssi1",
+ .gpio = RBCAP_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:rssi2",
+ .gpio = RBCAP_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:rssi3",
+ .gpio = RBCAP_GPIO_LED_3,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:rssi4",
+ .gpio = RBCAP_GPIO_LED_4,
+ .active_low = 1,
+ },
+};
+
+/* RB mAP-2nD gpios */
+#define RBMAP_SSR_BIT_LED_LAN1 0
+#define RBMAP_SSR_BIT_LED_LAN2 1
+#define RBMAP_SSR_BIT_LED_POEO 2
+#define RBMAP_SSR_BIT_LED_USER 3
+#define RBMAP_SSR_BIT_LED_WLAN 4
+#define RBMAP_SSR_BIT_USB_POWER 5
+#define RBMAP_SSR_BIT_LED_APCAP 6
+#define RBMAP_GPIO_SSR_CS 11
+#define RBMAP_GPIO_LED_POWER 4
+#define RBMAP_GPIO_POE_POWER 14
+#define RBMAP_GPIO_POE_STATUS 12
+#define RBMAP_GPIO_USB_POWER RBSPI_SSR_GPIO(RBMAP_SSR_BIT_USB_POWER)
+#define RBMAP_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN1)
+#define RBMAP_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN2)
+#define RBMAP_GPIO_LED_POEO RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_POEO)
+#define RBMAP_GPIO_LED_USER RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_USER)
+#define RBMAP_GPIO_LED_WLAN RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_WLAN)
+#define RBMAP_GPIO_LED_APCAP RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_APCAP)
+
+static struct gpio_led rbmap_leds[] __initdata = {
+ {
+ .name = "rb:green:power",
+ .gpio = RBMAP_GPIO_LED_POWER,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }, {
+ .name = "rb:green:eth1",
+ .gpio = RBMAP_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:eth2",
+ .gpio = RBMAP_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "rb:red:poe_out",
+ .gpio = RBMAP_GPIO_LED_POEO,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:user",
+ .gpio = RBMAP_GPIO_LED_USER,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:wlan",
+ .gpio = RBMAP_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:ap_cap",
+ .gpio = RBMAP_GPIO_LED_APCAP,
+ .active_low = 1,
+ },
+};
+
+
static struct gen_74x164_chip_platform_data rbspi_ssr_data = {
.base = RBSPI_SSR_GPIO_BASE,
};
@@ -492,7 +598,79 @@ static void __init rb750upr2_setup(void)
rbspi_952_750r2_setup(flags);
}
+/*
+ * Init the wAP hardware (EXPERIMENTAL).
+ * The wAP 2nD has a single ethernet port.
+ */
+static void __init rbwap_setup(void)
+{
+ u32 flags = RBSPI_HAS_WLAN;
+
+ if (rbspi_platform_setup())
+ return;
+
+ rbspi_peripherals_setup(flags);
+
+ /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 1 */
+ rbspi_network_setup(flags, 0, 1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwap_leds), rbwap_leds);
+}
+
+/*
+ * Init the cAP hardware (EXPERIMENTAL).
+ * The cAP 2nD has a single ethernet port, and a global LED switch.
+ */
+static void __init rbcap_setup(void)
+{
+ u32 flags = RBSPI_HAS_WLAN;
+
+ if (rbspi_platform_setup())
+ return;
+
+ rbspi_peripherals_setup(flags);
+
+ /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 1 */
+ rbspi_network_setup(flags, 0, 1);
+
+ gpio_request_one(RBCAP_GPIO_LED_ALL,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "LEDs enable");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rbcap_leds), rbcap_leds);
+}
+
+/*
+ * Init the mAP hardware (EXPERIMENTAL).
+ * The mAP 2nD has two ethernet ports, PoE output and an SSR for LED
+ * multiplexing.
+ */
+static void __init rbmap_setup(void)
+{
+ u32 flags = RBSPI_HAS_WLAN | RBSPI_HAS_SSR | RBSPI_HAS_POE;
+
+ if (rbspi_platform_setup())
+ return;
+
+ rbspi_spi_cs_gpios[1] = RBMAP_GPIO_SSR_CS;
+ rbspi_peripherals_setup(flags);
+
+ /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 2 */
+ rbspi_network_setup(flags, 0, 2);
+
+ if (flags & RBSPI_HAS_POE)
+ gpio_request_one(RBMAP_GPIO_POE_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "POE power");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmap_leds), rbmap_leds);
+}
+
+
MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_952, "952-hb", rb952_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_750UPR2, "750-hb", rb750upr2_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAP, "wap-hb", rbwap_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_CAP, "cap-hb", rbcap_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAP, "map2-hb", rbmap_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index a8fc07a1c3..69c848ef3d 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -175,7 +175,10 @@ enum ath79_mach_type {
ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
ATH79_MACH_RB_952, /* MikroTik RouterBOARD 951Ui-2nD */
+ ATH79_MACH_RB_CAP, /* Mikrotik RouterBOARD cAP2nD */
+ ATH79_MACH_RB_MAP, /* Mikrotik RouterBOARD mAP2nD */
ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */
+ ATH79_MACH_RB_WAP, /* Mikrotik RouterBOARD wAP2nD */
ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
ATH79_MACH_RE450, /* TP-LINK RE450 */