diff options
3 files changed, 184 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index bc06481e39..4c00ea5a95 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -931,6 +931,9 @@ config ATH79_MACH_RBSPI MikroTik RouterBOARD hAP MikroTik RouterBOARD hEX PoE lite MikroTik RouterBOARD hEX lite + MikroTik RouterBOARD cAP (EXPERIMENTAL) + MikroTik RouterBOARD mAP (EXPERIMENTAL) + MikroTik RouterBOARD wAP (EXPERIMENTAL) config ATH79_MACH_RBSXTLITE bool "MikroTik RouterBOARD SXT Lite" diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c index c0b27190fe..b6b3338845 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c @@ -7,6 +7,14 @@ * - MikroTik RouterBOARD 750UP r2 * - MikroTik RouterBOARD 750 r2 * + * Preliminary support for the following hardware + * - MikroTik RouterBOARD wAP2nD + * - MikroTik RouterBOARD cAP2nD + * - MikroTik RouterBOARD mAP2nD + * Furthermore, the cAP lite (cAPL2nD) appears to feature the exact same + * hardware as the mAP L-2nD. It is unknown if they share the same board + * identifier. + * * Copyright (C) 2017 Thibaut VARENE <varenet@parisc-linux.org> * * This program is free software; you can redistribute it and/or modify it @@ -189,6 +197,7 @@ static struct gpio_led rbhapl_leds[] __initdata = { #define RB952_GPIO_SSR_CS 11 #define RB952_GPIO_LED_USER 4 #define RB952_GPIO_POE_POWER 14 +#define RB952_GPIO_POE_STATUS 12 #define RB952_GPIO_USB_POWER RBSPI_SSR_GPIO(RB952_SSR_BIT_USB_POWER) #define RB952_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN1) #define RB952_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN2) @@ -229,6 +238,103 @@ static struct gpio_led rb952_leds[] __initdata = { }, }; +/* RB wAP-2nD gpios */ +#define RBWAP_GPIO_LED_USER 14 +#define RBWAP_GPIO_LED_WLAN 11 + +static struct gpio_led rbwap_leds[] __initdata = { + { + .name = "rb:green:user", + .gpio = RBWAP_GPIO_LED_USER, + .active_low = 1, + }, { + .name = "rb:green:wlan", + .gpio = RBWAP_GPIO_LED_WLAN, + .active_low = 1, + }, +}; + +/* RB cAP-2nD gpios */ +#define RBCAP_GPIO_LED_1 14 +#define RBCAP_GPIO_LED_2 12 +#define RBCAP_GPIO_LED_3 11 +#define RBCAP_GPIO_LED_4 4 +#define RBCAP_GPIO_LED_ALL 13 + +static struct gpio_led rbcap_leds[] __initdata = { + { + .name = "rb:green:rssi1", + .gpio = RBCAP_GPIO_LED_1, + .active_low = 1, + }, { + .name = "rb:green:rssi2", + .gpio = RBCAP_GPIO_LED_2, + .active_low = 1, + }, { + .name = "rb:green:rssi3", + .gpio = RBCAP_GPIO_LED_3, + .active_low = 1, + }, { + .name = "rb:green:rssi4", + .gpio = RBCAP_GPIO_LED_4, + .active_low = 1, + }, +}; + +/* RB mAP-2nD gpios */ +#define RBMAP_SSR_BIT_LED_LAN1 0 +#define RBMAP_SSR_BIT_LED_LAN2 1 +#define RBMAP_SSR_BIT_LED_POEO 2 +#define RBMAP_SSR_BIT_LED_USER 3 +#define RBMAP_SSR_BIT_LED_WLAN 4 +#define RBMAP_SSR_BIT_USB_POWER 5 +#define RBMAP_SSR_BIT_LED_APCAP 6 +#define RBMAP_GPIO_SSR_CS 11 +#define RBMAP_GPIO_LED_POWER 4 +#define RBMAP_GPIO_POE_POWER 14 +#define RBMAP_GPIO_POE_STATUS 12 +#define RBMAP_GPIO_USB_POWER RBSPI_SSR_GPIO(RBMAP_SSR_BIT_USB_POWER) +#define RBMAP_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN1) +#define RBMAP_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN2) +#define RBMAP_GPIO_LED_POEO RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_POEO) +#define RBMAP_GPIO_LED_USER RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_USER) +#define RBMAP_GPIO_LED_WLAN RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_WLAN) +#define RBMAP_GPIO_LED_APCAP RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_APCAP) + +static struct gpio_led rbmap_leds[] __initdata = { + { + .name = "rb:green:power", + .gpio = RBMAP_GPIO_LED_POWER, + .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, { + .name = "rb:green:eth1", + .gpio = RBMAP_GPIO_LED_LAN1, + .active_low = 1, + }, { + .name = "rb:green:eth2", + .gpio = RBMAP_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "rb:red:poe_out", + .gpio = RBMAP_GPIO_LED_POEO, + .active_low = 1, + }, { + .name = "rb:green:user", + .gpio = RBMAP_GPIO_LED_USER, + .active_low = 1, + }, { + .name = "rb:green:wlan", + .gpio = RBMAP_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "rb:green:ap_cap", + .gpio = RBMAP_GPIO_LED_APCAP, + .active_low = 1, + }, +}; + + static struct gen_74x164_chip_platform_data rbspi_ssr_data = { .base = RBSPI_SSR_GPIO_BASE, }; @@ -492,7 +598,79 @@ static void __init rb750upr2_setup(void) rbspi_952_750r2_setup(flags); } +/* + * Init the wAP hardware (EXPERIMENTAL). + * The wAP 2nD has a single ethernet port. + */ +static void __init rbwap_setup(void) +{ + u32 flags = RBSPI_HAS_WLAN; + + if (rbspi_platform_setup()) + return; + + rbspi_peripherals_setup(flags); + + /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 1 */ + rbspi_network_setup(flags, 0, 1); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwap_leds), rbwap_leds); +} + +/* + * Init the cAP hardware (EXPERIMENTAL). + * The cAP 2nD has a single ethernet port, and a global LED switch. + */ +static void __init rbcap_setup(void) +{ + u32 flags = RBSPI_HAS_WLAN; + + if (rbspi_platform_setup()) + return; + + rbspi_peripherals_setup(flags); + + /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 1 */ + rbspi_network_setup(flags, 0, 1); + + gpio_request_one(RBCAP_GPIO_LED_ALL, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "LEDs enable"); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rbcap_leds), rbcap_leds); +} + +/* + * Init the mAP hardware (EXPERIMENTAL). + * The mAP 2nD has two ethernet ports, PoE output and an SSR for LED + * multiplexing. + */ +static void __init rbmap_setup(void) +{ + u32 flags = RBSPI_HAS_WLAN | RBSPI_HAS_SSR | RBSPI_HAS_POE; + + if (rbspi_platform_setup()) + return; + + rbspi_spi_cs_gpios[1] = RBMAP_GPIO_SSR_CS; + rbspi_peripherals_setup(flags); + + /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 2 */ + rbspi_network_setup(flags, 0, 2); + + if (flags & RBSPI_HAS_POE) + gpio_request_one(RBMAP_GPIO_POE_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "POE power"); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmap_leds), rbmap_leds); +} + + MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_952, "952-hb", rb952_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_750UPR2, "750-hb", rb750upr2_setup); +MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAP, "wap-hb", rbwap_setup); +MIPS_MACHINE_NONAME(ATH79_MACH_RB_CAP, "cap-hb", rbcap_setup); +MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAP, "map2-hb", rbmap_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index a8fc07a1c3..69c848ef3d 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -175,7 +175,10 @@ enum ath79_mach_type { ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ ATH79_MACH_RB_952, /* MikroTik RouterBOARD 951Ui-2nD */ + ATH79_MACH_RB_CAP, /* Mikrotik RouterBOARD cAP2nD */ + ATH79_MACH_RB_MAP, /* Mikrotik RouterBOARD mAP2nD */ ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */ + ATH79_MACH_RB_WAP, /* Mikrotik RouterBOARD wAP2nD */ ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ ATH79_MACH_RE450, /* TP-LINK RE450 */ |