ramips: add support for HiWiFi HC5761A

HiWiFi HC5761A is an "MT7628AN variant" of HC5761

Specifications:
- MediaTek MT7628AN 580MHz
- 128 MB DDR2 RAM
- 16 MB SPI Flash
- 2.4G MT7628AN 802.11bgn 2T2R 300Mbps
- 5G MT7610EN 802.11ac 433Mbps
- 3x 10/100 Mbps Ethernet

Flash instruction:
1. Get SSH access to the router
2. SSH to router with `ssh -p 1022 root@192.168.199.1`, The SSH password is the same as the webconfig one
3. Upload OpenWrt sysupgrade firmware into the router's `/tmp` folder with SCP
4. Run `mtd write /tmp/<filename> firmware`
5. reboot

Known bug:
- SD slot does not work (See PR 1500)

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>

1 files changed, 56 insertions, 0 deletions

diff --git a/target/linux/ramips/dts/mt7628an_hiwifi_hc5761a.dts b/target/linux/ramips/dts/mt7628an_hiwifi_hc5761a.dts
new file mode 100644
index 0000000000..a8b9049391
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_hiwifi_hc5761a.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an_hiwifi_hc5x61a.dtsi"
+
+/ {
+	compatible = "hiwifi,hc5761a", "mediatek,mt7628an-soc";
+	model = "HiWiFi HC5761A";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_system: system {
+			label = "hc5761a:blue:system";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		internet {
+			label = "hc5761a:blue:internet";
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			label = "hc5761a:blue:wlan2g";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wlan5g {
+			label = "hc5761a:blue:wlan5g";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "refclk", "wdt", "p3led_an", "wled_an";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x8000>;
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};