diff options
| author | Daniel González Cabanelas <dgcbueu@gmail.com> | 2020-08-28 11:20:46 +0200 |
|---|---|---|
| committer | Daniel Golle <daniel@makrotopia.org> | 2020-08-28 10:44:29 +0100 |
| commit | 42d14ace3e381ec04a7c8fa233eaaff8fa3a0820 (patch) | |
| tree | 5e06cf9ee88929a4cc7ac2c1c1000dfdcdc196e7 /target/linux/mvebu/files | |
| parent | 59c200ca0adec1759f09b129424361cca1643f9d (diff) | |
| download | upstream-42d14ace3e381ec04a7c8fa233eaaff8fa3a0820.tar.gz upstream-42d14ace3e381ec04a7c8fa233eaaff8fa3a0820.tar.bz2 upstream-42d14ace3e381ec04a7c8fa233eaaff8fa3a0820.zip | |
mvebu: LS421DE: add linkstation poweroff driver
Compile the Linkstation poweroff module for the Buffalo LS421DE.
Without this driver the device remains forever halted if a power off
command is executed.
The driver will also allow to use the WoL feature, which wasn't availabe
in the stock firmware.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Diffstat (limited to 'target/linux/mvebu/files')
| -rw-r--r-- | target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts | 13 |
1 files changed, 0 insertions, 13 deletions
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts index ea392f9e41..e0c0cb55a0 100644 --- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts +++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts @@ -209,12 +209,6 @@ gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; }; - - /* FIXME: this driver needs to be aware of the LED2 eth phy use, - which must be set to off state before shutting down the machine */ - restart_poweroff { - compatible = "restart-poweroff"; - }; }; ð1 { @@ -243,13 +237,6 @@ ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */ reg = <0>; - /* - * LED2 is used to inform, at restart time, if the power - * switch was slided to the "off" position. - * Page 0x3, Register 0x10, bits 8-11: - * 0x800: LED2 off, power off the machine - * 0x900: LED2 on, boot the machine - */ marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED function */ <0x3 0x11 0x1 0x4401>, /* LED polarity */ <0x3 0x12 0x1 0x4905>; /* LED timer */ |