diff options
| author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-10-09 21:53:35 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-10-30 19:29:59 +0100 |
| commit | 278512665094888d3c007fdd74e090496d6c811d (patch) | |
| tree | 6d4f2cdddef316e07829b89c1c1a790d0db92fc3 /target/linux/imx6 | |
| parent | 3824fa26d256d162fc0e02e46714eda7816cae4a (diff) | |
| download | upstream-278512665094888d3c007fdd74e090496d6c811d.tar.gz upstream-278512665094888d3c007fdd74e090496d6c811d.tar.bz2 upstream-278512665094888d3c007fdd74e090496d6c811d.zip | |
kernel: remove support for kernel 4.19
We use 5.4 on all targets by default, and 4.19 has never been released
in a stable version. There is no reason to keep it.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/imx6')
8 files changed, 0 insertions, 2758 deletions
diff --git a/target/linux/imx6/config-4.19 b/target/linux/imx6/config-4.19 deleted file mode 100644 index 8435ece397..0000000000 --- a/target/linux/imx6/config-4.19 +++ /dev/null @@ -1,534 +0,0 @@ -CONFIG_AHCI_IMX=y -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_KCOV=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_ARCH_HAS_PHYS_TO_DMA=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MXC=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_CRYPTO=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARM_IMX6Q_CPUFREQ=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_ASN1=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_ATA=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_CACHE_L2X0=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_IMX_GPT=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CLZ_TAB=y -CONFIG_CMDLINE="pci=nomsi" -CONFIG_CMDLINE_EXTEND=y -CONFIG_COMMON_CLK=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -# CONFIG_CRASHLOG is not set -CONFIG_CRC16=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_AES_ARM=y -CONFIG_CRYPTO_AES_ARM_BS=y -# CONFIG_CRYPTO_AES_ARM_CE is not set -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AUTHENC=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CHACHA20=y -CONFIG_CRYPTO_CHACHA20_NEON=y -CONFIG_CRYPTO_CRC32=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32_ARM_CE=y -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_CTS=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DEV_FSL_CAAM=y -CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y -CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y -CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=y -# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set -# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set -CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y -CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y -CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9 -CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_GF128MUL=y -# CONFIG_CRYPTO_GHASH_ARM_CE is not set -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_RSA=y -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA1_ARM=y -# CONFIG_CRYPTO_SHA1_ARM_CE is not set -CONFIG_CRYPTO_SHA1_ARM_NEON=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA256_ARM=y -# CONFIG_CRYPTO_SHA2_ARM_CE is not set -CONFIG_CRYPTO_SHA512_ARM=y -CONFIG_CRYPTO_SIMD=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CRYPTO_XTS=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_IMX_UART_PORT=1 -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -# CONFIG_DEBUG_USER is not set -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DTC=y -CONFIG_E1000E=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_ENCRYPTED_KEYS=y -CONFIG_EXT4_ENCRYPTION=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_ENCRYPTION=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_EXTCON=y -CONFIG_EXTRA_FIRMWARE="imx/sdma/sdma-imx6q.bin" -CONFIG_EXTRA_FIRMWARE_DIR="firmware" -CONFIG_F2FS_FS=y -CONFIG_FEC=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FRAME_POINTER=y -CONFIG_FSL_GUTS=y -CONFIG_FS_ENCRYPTION=y -CONFIG_FS_IOMAP=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -# CONFIG_GIANFAR is not set -CONFIG_GLOB=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_MXC=y -CONFIG_GPIO_PCA953X=y -CONFIG_GPIO_PCA953X_IRQ=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_SMCCC=y -CONFIG_HAVE_ARM_TWD=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_EBPF_JIT=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IMX_ANATOP=y -CONFIG_HAVE_IMX_GPC=y -CONFIG_HAVE_IMX_MMDC=y -CONFIG_HAVE_IMX_SRC=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HWMON=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_IMX_RNGC=y -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IMX=y -# CONFIG_I2C_IMX_LPI2C is not set -CONFIG_IMX2_WDT=y -CONFIG_IMX_DMA=y -CONFIG_IMX_SDMA=y -CONFIG_IMX_THERMAL=y -# CONFIG_IMX_WEIM is not set -# CONFIG_INITRAMFS_FORCE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -# CONFIG_JFFS2_FS is not set -CONFIG_KEYS=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MICREL_PHY=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_MXC is not set -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ESDHC_IMX=y -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_OF_ESDHC=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -# CONFIG_MMC_TIFM_SD is not set -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MPILIB=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_GPMI_NAND=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUTEX_SPIN_ON_OWNER=y -# CONFIG_MX3_IPU is not set -CONFIG_MXS_DMA=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6XXX=y -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -# CONFIG_NET_DSA_MV88E6XXX_PTP is not set -CONFIG_NET_DSA_TAG_DSA=y -CONFIG_NET_DSA_TAG_EDSA=y -# CONFIG_NET_DSA_VITESSE_VSC73XX is not set -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NO_BOOTMEM=y -CONFIG_NR_CPUS=4 -CONFIG_NVMEM=y -# CONFIG_NVMEM_IMX_IIM is not set -CONFIG_NVMEM_IMX_OCOTP=y -# CONFIG_NVMEM_SNVS_LPGPR is not set -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -CONFIG_PCIE_DW_PLAT=y -CONFIG_PCIE_DW_PLAT_HOST=y -CONFIG_PCIE_PME=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_IMX6=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -# CONFIG_PCI_V3_SEMI is not set -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_IMX=y -CONFIG_PINCTRL_IMX6Q=y -CONFIG_PINCTRL_IMX6SL=y -CONFIG_PINCTRL_IMX6SX=y -CONFIG_PINCTRL_IMX6UL=y -# CONFIG_PL310_ERRATA_588369 is not set -# CONFIG_PL310_ERRATA_727915 is not set -# CONFIG_PL310_ERRATA_753970 is not set -CONFIG_PL310_ERRATA_769419=y -CONFIG_PM=y -CONFIG_PM_CLK=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_GENERIC_DOMAINS=y -CONFIG_PM_GENERIC_DOMAINS_OF=y -CONFIG_PM_OPP=y -CONFIG_PPS=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PWM=y -CONFIG_PWM_IMX=y -CONFIG_PWM_SYSFS=y -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_RCU_NEED_SEGCBLIST=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RD_BZIP2=y -CONFIG_RD_GZIP=y -CONFIG_RD_LZO=y -CONFIG_RD_XZ=y -CONFIG_REFCOUNT_FULL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_ANATOP=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_LTC3676=y -CONFIG_REGULATOR_PFUZE100=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_CMOS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_DS1672=y -# CONFIG_RTC_DRV_IMXDI is not set -# CONFIG_RTC_DRV_MXC is not set -# CONFIG_RTC_DRV_MXC_V2 is not set -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SCSI=y -CONFIG_SENSORS_AD7418=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SGL_ALLOC=y -CONFIG_SG_POOL=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SOC_BUS=y -# CONFIG_SOC_IMX50 is not set -# CONFIG_SOC_IMX51 is not set -# CONFIG_SOC_IMX53 is not set -CONFIG_SOC_IMX6=y -CONFIG_SOC_IMX6Q=y -CONFIG_SOC_IMX6SL=y -# CONFIG_SOC_IMX6SLL is not set -CONFIG_SOC_IMX6SX=y -CONFIG_SOC_IMX6UL=y -# CONFIG_SOC_IMX7D is not set -# CONFIG_SOC_LS1021A is not set -# CONFIG_SOC_VF610 is not set -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -# CONFIG_SPI_FSL_LPSPI is not set -CONFIG_SPI_IMX=y -CONFIG_SPI_MASTER=y -CONFIG_SRAM=y -CONFIG_SRAM_EXEC=y -CONFIG_SRCU=y -CONFIG_STMP_DEVICE=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB=y -CONFIG_USB_CHIPIDEA=y -CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_CHIPIDEA_OF=y -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_COMMON=y -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_HCD_PLATFORM is not set -# CONFIG_USB_EHCI_MXC is not set -CONFIG_USB_GADGET=y -CONFIG_USB_MXS_PHY=y -CONFIG_USB_OTG=y -CONFIG_USB_PHY=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_ULPI_BUS=y -CONFIG_USE_OF=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_VMSPLIT_2G=y -# CONFIG_VMSPLIT_3G is not set -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/imx6/patches-4.19/001-ARM-dts-imx-Add-GW5907-board-support.patch b/target/linux/imx6/patches-4.19/001-ARM-dts-imx-Add-GW5907-board-support.patch deleted file mode 100644 index 99d11692fa..0000000000 --- a/target/linux/imx6/patches-4.19/001-ARM-dts-imx-Add-GW5907-board-support.patch +++ /dev/null @@ -1,482 +0,0 @@ -From 125120298dc05bb55a8874f07aa3f4bb6056bfb3 Mon Sep 17 00:00:00 2001 -From: Robert Jones <rjones@gateworks.com> -Date: Wed, 8 Jan 2020 07:44:21 -0800 -Subject: [PATCH 1/4] ARM: dts: imx: Add GW5907 board support - -The Gateworks GW5907 is an IMX6 SoC based single board computer with: - - IMX6Q or IMX6DL - - 32bit DDR3 DRAM - - FEC GbE Phy - - bi-color front-panel LED - - 256MB NAND boot device - - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - - Digital IO expander (pca9555) - - Joystick 12bit adc (ads1015) - -Signed-off-by: Robert Jones <rjones@gateworks.com> -Reviewed-by: Tim Harvey <tharvey@gateworks.com> -Signed-off-by: Shawn Guo <shawnguo@kernel.org> ---- - arch/arm/boot/dts/Makefile | 2 + - arch/arm/boot/dts/imx6dl-gw5907.dts | 14 ++ - arch/arm/boot/dts/imx6q-gw5907.dts | 14 ++ - arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 399 ++++++++++++++++++++++++++++++++++ - 4 files changed, 429 insertions(+) - create mode 100644 arch/arm/boot/dts/imx6dl-gw5907.dts - create mode 100644 arch/arm/boot/dts/imx6q-gw5907.dts - create mode 100644 arch/arm/boot/dts/imx6qdl-gw5907.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -404,6 +404,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6dl-gw560x.dtb \ - imx6dl-gw5903.dtb \ - imx6dl-gw5904.dtb \ -+ imx6dl-gw5907.dtb \ - imx6dl-hummingboard.dtb \ - imx6dl-hummingboard-emmc-som-v15.dtb \ - imx6dl-hummingboard-som-v15.dtb \ -@@ -471,6 +472,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6q-gw560x.dtb \ - imx6q-gw5903.dtb \ - imx6q-gw5904.dtb \ -+ imx6q-gw5907.dtb \ - imx6q-h100.dtb \ - imx6q-hummingboard.dtb \ - imx6q-hummingboard-emmc-som-v15.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/imx6dl-gw5907.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6dl.dtsi" -+#include "imx6qdl-gw5907.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907"; -+ compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6q-gw5907.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6q.dtsi" -+#include "imx6qdl-gw5907.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5907"; -+ compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi -@@ -0,0 +1,399 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+#include <dt-bindings/gpio/gpio.h> -+ -+/ { -+ /* these are used by bootloader for disabling nodes */ -+ aliases { -+ led0 = &led0; -+ led1 = &led1; -+ nand = &gpmi; -+ usb0 = &usbh1; -+ usb1 = &usbotg; -+ }; -+ -+ chosen { -+ stdout-path = &uart2; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpio_leds>; -+ -+ led0: user1 { -+ label = "user1"; -+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ -+ default-state = "on"; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led1: user2 { -+ label = "user2"; -+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ -+ default-state = "off"; -+ }; -+ }; -+ -+ memory@10000000 { -+ device_type = "memory"; -+ reg = <0x10000000 0x20000000>; -+ }; -+ -+ pps { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pps>; -+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; -+ status = "okay"; -+ }; -+ -+ reg_3p3v: regulator-3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_5p0v: regulator-5p0v { -+ compatible = "regulator-fixed"; -+ regulator-name = "5P0V"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+ -+ reg_usb_otg_vbus: regulator-usb-otg-vbus { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb_otg_vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+}; -+ -+&fec { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_enet>; -+ phy-mode = "rgmii-id"; -+ phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+}; -+ -+&gpmi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpmi_nand>; -+ status = "okay"; -+}; -+ -+&hdmi { -+ ddc-i2c-bus = <&i2c3>; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1>; -+ status = "okay"; -+ -+ gpio@23 { -+ compatible = "nxp,pca9555"; -+ reg = <0x23>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ eeprom@50 { -+ compatible = "atmel,24c02"; -+ reg = <0x50>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@51 { -+ compatible = "atmel,24c02"; -+ reg = <0x51>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@52 { -+ compatible = "atmel,24c02"; -+ reg = <0x52>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@53 { -+ compatible = "atmel,24c02"; -+ reg = <0x53>; -+ pagesize = <16>; -+ }; -+ -+ rtc@68 { -+ compatible = "dallas,ds1672"; -+ reg = <0x68>; -+ }; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c2>; -+ status = "okay"; -+}; -+ -+&i2c3 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c3>; -+ status = "okay"; -+ -+ gpio@20 { -+ compatible = "nxp,pca9555"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ adc@48 { -+ compatible = "ti,ads1015"; -+ reg = <0x48>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ channel@4 { -+ reg = <4>; -+ ti,gain = <0>; -+ ti,datarate = <5>; -+ }; -+ -+ channel@5 { -+ reg = <5>; -+ ti,gain = <0>; -+ ti,datarate = <5>; -+ }; -+ -+ channel@6 { -+ reg = <6>; -+ ti,gain = <0>; -+ ti,datarate = <5>; -+ }; -+ }; -+}; -+ -+&pcie { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pcie>; -+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+}; -+ -+&pwm2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ -+ status = "disabled"; -+}; -+ -+&pwm3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ -+ status = "disabled"; -+}; -+ -+&pwm4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */ -+ status = "disabled"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart1>; -+ status = "okay"; -+}; -+ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2>; -+ status = "okay"; -+}; -+ -+&uart3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart3>; -+ status = "okay"; -+}; -+ -+&uart5 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart5>; -+ status = "okay"; -+}; -+ -+&usbotg { -+ vbus-supply = <®_usb_otg_vbus>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usbotg>; -+ disable-over-current; -+ status = "okay"; -+}; -+ -+&usbh1 { -+ status = "okay"; -+}; -+ -+&wdog1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_wdog>; -+ fsl,ext-reset-output; -+}; -+ -+&iomuxc { -+ pinctrl_enet: enetgrp { -+ fsl,pins = < -+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 -+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 -+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 -+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 -+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 -+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 -+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 -+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 -+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 -+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 -+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 -+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 -+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 -+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 -+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 -+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 -+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpio_leds: gpioledsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpmi_nand: gpminandgrp { -+ fsl,pins = < -+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; -+ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 -+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 -+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 -+ >; -+ }; -+ -+ pinctrl_i2c2: i2c2grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_i2c3: i2c3grp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 -+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_pcie: pciegrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_pps: ppsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm2: pwm2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm3: pwm3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm4: pwm4grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart1: uart1grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart2: uart2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart3: uart3grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart5: uart5grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_usbotg: usbotggrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 -+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_wdog: wdoggrp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 -+ >; -+ }; -+}; diff --git a/target/linux/imx6/patches-4.19/002-ARM-dts-imx-Add-GW5910-board-support.patch b/target/linux/imx6/patches-4.19/002-ARM-dts-imx-Add-GW5910-board-support.patch deleted file mode 100644 index ec982e96ad..0000000000 --- a/target/linux/imx6/patches-4.19/002-ARM-dts-imx-Add-GW5910-board-support.patch +++ /dev/null @@ -1,583 +0,0 @@ -From a1fb69366bb16753f0fba6a891fbef5cdd97cfbe Mon Sep 17 00:00:00 2001 -From: Tim Harvey <tharvey@gateworks.com> -Date: Wed, 8 Jan 2020 07:44:22 -0800 -Subject: [PATCH 2/4] ARM: dts: imx: Add GW5910 board support - -The Gateworks GW5910 is an IMX6 SoC based single board computer with: - - IMX6Q or IMX6DL - - 32bit DDR3 DRAM - - FEC GbE RJ45 front-panel - - 1x miniPCIe socket with PCI Gen2, USB2 - - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM - - 5V to 60V DC input barrel jack - - 3axis accelerometer (lis2de12) - - GPS (ublox ZOE-M8Q) - - bi-color front-panel LED - - 256MB NAND boot device - - microSD socket (with UHS-I support) - - user pushbutton - - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - - Dual-Band Wireless MCU (CC1352, UART/I2S interrconnect to IMX6) - - WiFi/Bluetooth/BLE module (Sterling-LSW, SDIO/UART interconnect to IMX6) - - RS232 transceiver (1x UART with flow-control or 2x UART (build option) - - off-board SPI connector (1x chip-select) - -Signed-off-by: Tim Harvey <tharvey@gateworks.com> -Signed-off-by: Robert Jones <rjones@gateworks.com> -Signed-off-by: Shawn Guo <shawnguo@kernel.org> ---- - arch/arm/boot/dts/Makefile | 2 + - arch/arm/boot/dts/imx6dl-gw5910.dts | 14 + - arch/arm/boot/dts/imx6q-gw5910.dts | 14 + - arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 491 ++++++++++++++++++++++++++++++++++ - 4 files changed, 521 insertions(+) - create mode 100644 arch/arm/boot/dts/imx6dl-gw5910.dts - create mode 100644 arch/arm/boot/dts/imx6q-gw5910.dts - create mode 100644 arch/arm/boot/dts/imx6qdl-gw5910.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -405,6 +405,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6dl-gw5903.dtb \ - imx6dl-gw5904.dtb \ - imx6dl-gw5907.dtb \ -+ imx6dl-gw5910.dtb \ - imx6dl-hummingboard.dtb \ - imx6dl-hummingboard-emmc-som-v15.dtb \ - imx6dl-hummingboard-som-v15.dtb \ -@@ -473,6 +474,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6q-gw5903.dtb \ - imx6q-gw5904.dtb \ - imx6q-gw5907.dtb \ -+ imx6q-gw5910.dtb \ - imx6q-h100.dtb \ - imx6q-hummingboard.dtb \ - imx6q-hummingboard-emmc-som-v15.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/imx6dl-gw5910.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6dl.dtsi" -+#include "imx6qdl-gw5910.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910"; -+ compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6q-gw5910.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6q.dtsi" -+#include "imx6qdl-gw5910.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5910"; -+ compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi -@@ -0,0 +1,491 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+#include <dt-bindings/gpio/gpio.h> -+ -+/ { -+ /* these are used by bootloader for disabling nodes */ -+ aliases { -+ led0 = &led0; -+ led1 = &led1; -+ led2 = &led2; -+ }; -+ -+ chosen { -+ stdout-path = &uart2; -+ }; -+ -+ memory@10000000 { -+ device_type = "memory"; -+ reg = <0x10000000 0x20000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpio_leds>; -+ -+ led0: user1 { -+ label = "user1"; -+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ -+ default-state = "on"; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led1: user2 { -+ label = "user2"; -+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ -+ default-state = "off"; -+ }; -+ -+ led2: user3 { -+ label = "user3"; -+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ -+ default-state = "off"; -+ }; -+ }; -+ -+ pps { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pps>; -+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; -+ status = "okay"; -+ }; -+ -+ reg_3p3v: regulator-3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_5p0v: regulator-5p0v { -+ compatible = "regulator-fixed"; -+ regulator-name = "5P0V"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+ -+ reg_wl: regulator-wl { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_reg_wl>; -+ compatible = "regulator-fixed"; -+ regulator-name = "wl"; -+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; -+ startup-delay-us = <100>; -+ enable-active-high; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_bt: regulator-bt { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_reg_bt>; -+ compatible = "regulator-fixed"; -+ regulator-name = "bt"; -+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; -+ startup-delay-us = <100>; -+ enable-active-high; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+}; -+ -+ -+&ecspi3 { -+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_ecspi3>; -+ status = "okay"; -+}; -+ -+&fec { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_enet>; -+ phy-mode = "rgmii-id"; -+ status = "okay"; -+}; -+ -+&gpmi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpmi_nand>; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1>; -+ status = "okay"; -+ -+ gpio@23 { -+ compatible = "nxp,pca9555"; -+ reg = <0x23>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ eeprom@50 { -+ compatible = "atmel,24c02"; -+ reg = <0x50>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@51 { -+ compatible = "atmel,24c02"; -+ reg = <0x51>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@52 { -+ compatible = "atmel,24c02"; -+ reg = <0x52>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@53 { -+ compatible = "atmel,24c02"; -+ reg = <0x53>; -+ pagesize = <16>; -+ }; -+ -+ rtc@68 { -+ compatible = "dallas,ds1672"; -+ reg = <0x68>; -+ }; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c2>; -+ status = "okay"; -+}; -+ -+&i2c3 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c3>; -+ status = "okay"; -+ -+ accel@19 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_accel>; -+ compatible = "st,lis2de12"; -+ reg = <0x19>; -+ st,drdy-int-pin = <1>; -+ interrupt-parent = <&gpio7>; -+ interrupts = <13 0>; -+ interrupt-names = "INT1"; -+ }; -+}; -+ -+&pcie { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pcie>; -+ reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+}; -+ -+&pwm2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ -+ status = "disabled"; -+}; -+ -+&pwm3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ -+ status = "disabled"; -+}; -+ -+/* off-board RS232 */ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart1>; -+ status = "okay"; -+}; -+ -+/* serial console */ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2>; -+ status = "okay"; -+}; -+ -+/* Sterling-LWB Bluetooth */ -+&uart4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart4>; -+ uart-has-rtscts; -+ status = "okay"; -+}; -+ -+/* GPS */ -+&uart5 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart5>; -+ status = "okay"; -+}; -+ -+&usbotg { -+ vbus-supply = <®_5p0v>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usbotg>; -+ disable-over-current; -+ status = "okay"; -+}; -+ -+&usbh1 { -+ status = "okay"; -+}; -+ -+/* Sterling-LWB SDIO WiFi */ -+&usdhc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usdhc2>; -+ vmmc-supply = <®_3p3v>; -+ non-removable; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&usdhc3 { -+ pinctrl-names = "default", "state_100mhz", "state_200mhz"; -+ pinctrl-0 = <&pinctrl_usdhc3>; -+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; -+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; -+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; -+ vmmc-supply = <®_3p3v>; -+ status = "okay"; -+}; -+ -+&wdog1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_wdog>; -+ fsl,ext-reset-output; -+}; -+ -+&iomuxc { -+ pinctrl_accel: accelmuxgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_ecspi3: escpi3grp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 -+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 -+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 -+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 -+ >; -+ }; -+ -+ pinctrl_enet: enetgrp { -+ fsl,pins = < -+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 -+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 -+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 -+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 -+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 -+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 -+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 -+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 -+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 -+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 -+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 -+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 -+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 -+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 -+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 -+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 -+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpio_leds: gpioledsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpmi_nand: gpminandgrp { -+ fsl,pins = < -+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; -+ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 -+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 -+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 -+ >; -+ }; -+ -+ pinctrl_i2c2: i2c2grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_i2c3: i2c3grp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_pcie: pciegrp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_pps: ppsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm2: pwm2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm3: pwm3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_reg_bt: regbtgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_reg_wl: regwlgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart1: uart1grp { -+ fsl,pins = < -+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart2: uart2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart4: uart4grp { -+ fsl,pins = < -+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart5: uart5grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_usbotg: usbotggrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 -+ >; -+ }; -+ -+ pinctrl_usdhc2: usdhc2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 -+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 -+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 -+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 -+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 -+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 -+ >; -+ }; -+ -+ pinctrl_usdhc3: usdhc3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 -+ >; -+ }; -+ -+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 -+ >; -+ }; -+ -+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 -+ >; -+ }; -+ -+ pinctrl_wdog: wdoggrp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 -+ >; -+ }; -+}; diff --git a/target/linux/imx6/patches-4.19/003-ARM-dts-imx-Add-GW5913-board-support.patch b/target/linux/imx6/patches-4.19/003-ARM-dts-imx-Add-GW5913-board-support.patch deleted file mode 100644 index 9c46401201..0000000000 --- a/target/linux/imx6/patches-4.19/003-ARM-dts-imx-Add-GW5913-board-support.patch +++ /dev/null @@ -1,435 +0,0 @@ -From 169e12f99cf9d5fce752564f32fd8df96461de43 Mon Sep 17 00:00:00 2001 -From: Robert Jones <rjones@gateworks.com> -Date: Wed, 8 Jan 2020 07:44:23 -0800 -Subject: [PATCH 3/4] ARM: dts: imx: Add GW5913 board support - -The Gateworks GW5913 is an IMX6 SoC based single board computer with: - - IMX6Q or IMX6DL - - 32bit DDR3 DRAM - - FEC GbE RJ45 front-panel - - 1x miniPCIe socket with PCI Gen2, USB2 - - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM - - 6V to 60V DC input connector - - GPS (ublox ZOE-M8Q) - - bi-color front-panel LED - - 256MB NAND boot device - - nanoSIM socket - - user pushbutton - - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - -Signed-off-by: Robert Jones <rjones@gateworks.com> -Reviewed-by: Tim Harvey <tharvey@gateworks.com> -Signed-off-by: Shawn Guo <shawnguo@kernel.org> ---- - arch/arm/boot/dts/Makefile | 2 + - arch/arm/boot/dts/imx6dl-gw5913.dts | 14 ++ - arch/arm/boot/dts/imx6q-gw5913.dts | 14 ++ - arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 348 ++++++++++++++++++++++++++++++++++ - 4 files changed, 378 insertions(+) - create mode 100644 arch/arm/boot/dts/imx6dl-gw5913.dts - create mode 100644 arch/arm/boot/dts/imx6q-gw5913.dts - create mode 100644 arch/arm/boot/dts/imx6qdl-gw5913.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -406,6 +406,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6dl-gw5904.dtb \ - imx6dl-gw5907.dtb \ - imx6dl-gw5910.dtb \ -+ imx6dl-gw5913.dtb \ - imx6dl-hummingboard.dtb \ - imx6dl-hummingboard-emmc-som-v15.dtb \ - imx6dl-hummingboard-som-v15.dtb \ -@@ -475,6 +476,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6q-gw5904.dtb \ - imx6q-gw5907.dtb \ - imx6q-gw5910.dtb \ -+ imx6q-gw5913.dtb \ - imx6q-h100.dtb \ - imx6q-hummingboard.dtb \ - imx6q-hummingboard-emmc-som-v15.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/imx6dl-gw5913.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6dl.dtsi" -+#include "imx6qdl-gw5913.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913"; -+ compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6q-gw5913.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6q.dtsi" -+#include "imx6qdl-gw5913.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5913"; -+ compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi -@@ -0,0 +1,348 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+#include <dt-bindings/gpio/gpio.h> -+ -+/ { -+ /* these are used by bootloader for disabling nodes */ -+ aliases { -+ led0 = &led0; -+ led1 = &led1; -+ nand = &gpmi; -+ usb0 = &usbh1; -+ usb1 = &usbotg; -+ }; -+ -+ chosen { -+ stdout-path = &uart2; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpio_leds>; -+ -+ led0: user1 { -+ label = "user1"; -+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ -+ default-state = "on"; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led1: user2 { -+ label = "user2"; -+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ -+ default-state = "off"; -+ }; -+ }; -+ -+ memory@10000000 { -+ device_type = "memory"; -+ reg = <0x10000000 0x20000000>; -+ }; -+ -+ pps { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pps>; -+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; -+ status = "okay"; -+ }; -+ -+ reg_3p3v: regulator-3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_5p0v: regulator-5p0v { -+ compatible = "regulator-fixed"; -+ regulator-name = "5P0V"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+}; -+ -+&fec { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_enet>; -+ phy-mode = "rgmii-id"; -+ status = "okay"; -+}; -+ -+&gpmi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpmi_nand>; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1>; -+ status = "okay"; -+ -+ gpio@23 { -+ compatible = "nxp,pca9555"; -+ reg = <0x23>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ eeprom@50 { -+ compatible = "atmel,24c02"; -+ reg = <0x50>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@51 { -+ compatible = "atmel,24c02"; -+ reg = <0x51>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@52 { -+ compatible = "atmel,24c02"; -+ reg = <0x52>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@53 { -+ compatible = "atmel,24c02"; -+ reg = <0x53>; -+ pagesize = <16>; -+ }; -+ -+ rtc@68 { -+ compatible = "dallas,ds1672"; -+ reg = <0x68>; -+ }; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c2>; -+ status = "okay"; -+}; -+ -+&i2c3 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c3>; -+ status = "okay"; -+}; -+ -+&pcie { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pcie>; -+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+}; -+ -+&pwm2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ -+ status = "disabled"; -+}; -+ -+&pwm3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ -+ status = "disabled"; -+}; -+ -+&pwm4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */ -+ status = "disabled"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart1>; -+ status = "okay"; -+}; -+ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2>; -+ status = "okay"; -+}; -+ -+&uart3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart3>; -+ status = "okay"; -+}; -+ -+&uart5 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart5>; -+ status = "okay"; -+}; -+ -+&usbotg { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usbotg>; -+ disable-over-current; -+ status = "okay"; -+}; -+ -+&usbh1 { -+ status = "okay"; -+}; -+ -+&wdog1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_wdog>; -+ fsl,ext-reset-output; -+}; -+ -+&iomuxc { -+ pinctrl_enet: enetgrp { -+ fsl,pins = < -+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 -+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 -+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 -+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 -+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 -+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 -+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 -+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 -+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 -+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 -+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 -+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 -+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 -+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 -+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 -+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 -+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpio_leds: gpioledsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpmi_nand: gpminandgrp { -+ fsl,pins = < -+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; -+ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 -+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 -+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 -+ >; -+ }; -+ -+ pinctrl_i2c2: i2c2grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_i2c3: i2c3grp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_pcie: pciegrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_pps: ppsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm2: pwm2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm3: pwm3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm4: pwm4grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart1: uart1grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart2: uart2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart3: uart3grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart5: uart5grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_usbotg: usbotggrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 -+ >; -+ }; -+ -+ pinctrl_wdog: wdoggrp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 -+ >; -+ }; -+}; diff --git a/target/linux/imx6/patches-4.19/004-ARM-dts-imx-Add-GW5912-board-support.patch b/target/linux/imx6/patches-4.19/004-ARM-dts-imx-Add-GW5912-board-support.patch deleted file mode 100644 index cd03a95d8e..0000000000 --- a/target/linux/imx6/patches-4.19/004-ARM-dts-imx-Add-GW5912-board-support.patch +++ /dev/null @@ -1,551 +0,0 @@ -From 9a820b55817011f53771e6bfebae5fe059f0a534 Mon Sep 17 00:00:00 2001 -From: Robert Jones <rjones@gateworks.com> -Date: Wed, 8 Jan 2020 07:44:24 -0800 -Subject: [PATCH 4/4] ARM: dts: imx: Add GW5912 board support - -The Gateworks GW5912 is an IMX6 SoC based single board computer with: - - IMX6Q or IMX6DL - - 32bit DDR3 DRAM - - GbE RJ45 front-panel - - 4x miniPCIe socket with PCI Gen2, USB2 - - 1x miniPCIe socket with PCI Gen2, USB2, mSATA - - 1x miniPCIe socket with PCI Gen2, USB2, mezzanine - - 10V to 60V DC input barrel jack - - 3axis accelerometer (lis2de12) - - GPS (ublox ZOE-M8Q) - - bi-color front-panel LED - - 256MB NAND boot device - - nanoSIM/microSD socket (with UHS-I support) - - user pushbutton - - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - - CAN Bus transceiver (mcp2562) - - RS232 transceiver (1x UART with flow-control or 2x UART (build option) - - off-board SPI connector (1x chip-select) - -Signed-off-by: Robert Jones <rjones@gateworks.com> -Reviewed-by: Tim Harvey <tharvey@gateworks.com> -Signed-off-by: Shawn Guo <shawnguo@kernel.org> ---- - arch/arm/boot/dts/Makefile | 2 + - arch/arm/boot/dts/imx6dl-gw5912.dts | 13 + - arch/arm/boot/dts/imx6q-gw5912.dts | 13 + - arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 461 ++++++++++++++++++++++++++++++++++ - 4 files changed, 489 insertions(+) - create mode 100644 arch/arm/boot/dts/imx6dl-gw5912.dts - create mode 100644 arch/arm/boot/dts/imx6q-gw5912.dts - create mode 100644 arch/arm/boot/dts/imx6qdl-gw5912.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -406,6 +406,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6dl-gw5904.dtb \ - imx6dl-gw5907.dtb \ - imx6dl-gw5910.dtb \ -+ imx6dl-gw5912.dtb \ - imx6dl-gw5913.dtb \ - imx6dl-hummingboard.dtb \ - imx6dl-hummingboard-emmc-som-v15.dtb \ -@@ -476,6 +477,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6q-gw5904.dtb \ - imx6q-gw5907.dtb \ - imx6q-gw5910.dtb \ -+ imx6q-gw5912.dtb \ - imx6q-gw5913.dtb \ - imx6q-h100.dtb \ - imx6q-hummingboard.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/imx6dl-gw5912.dts -@@ -0,0 +1,13 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+#include "imx6dl.dtsi" -+#include "imx6qdl-gw5912.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912"; -+ compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6q-gw5912.dts -@@ -0,0 +1,13 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+#include "imx6q.dtsi" -+#include "imx6qdl-gw5912.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5912"; -+ compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi -@@ -0,0 +1,461 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+#include <dt-bindings/gpio/gpio.h> -+ -+/ { -+ /* these are used by bootloader for disabling nodes */ -+ aliases { -+ led0 = &led0; -+ led1 = &led1; -+ led2 = &led2; -+ nand = &gpmi; -+ usb0 = &usbh1; -+ usb1 = &usbotg; -+ }; -+ -+ chosen { -+ stdout-path = &uart2; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpio_leds>; -+ -+ led0: user1 { -+ label = "user1"; -+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ -+ default-state = "on"; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led1: user2 { -+ label = "user2"; -+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ -+ default-state = "off"; -+ }; -+ -+ led2: user3 { -+ label = "user3"; -+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ -+ default-state = "off"; -+ }; -+ }; -+ -+ memory@10000000 { -+ device_type = "memory"; -+ reg = <0x10000000 0x40000000>; -+ }; -+ -+ pps { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pps>; -+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ reg_3p3v: regulator-3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_usb_vbus: regulator-5p0v { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb_vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+}; -+ -+&can1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_flexcan1>; -+ status = "okay"; -+}; -+ -+&ecspi2 { -+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_ecspi2>; -+ status = "okay"; -+}; -+ -+&fec { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_enet>; -+ phy-mode = "rgmii-id"; -+ status = "okay"; -+}; -+ -+&gpmi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpmi_nand>; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1>; -+ status = "okay"; -+ -+ gpio@23 { -+ compatible = "nxp,pca9555"; -+ reg = <0x23>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ eeprom@50 { -+ compatible = "atmel,24c02"; -+ reg = <0x50>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@51 { -+ compatible = "atmel,24c02"; -+ reg = <0x51>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@52 { -+ compatible = "atmel,24c02"; -+ reg = <0x52>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@53 { -+ compatible = "atmel,24c02"; -+ reg = <0x53>; -+ pagesize = <16>; -+ }; -+ -+ rtc@68 { -+ compatible = "dallas,ds1672"; -+ reg = <0x68>; -+ }; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c2>; -+ status = "okay"; -+}; -+ -+&i2c3 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c3>; -+ status = "okay"; -+ -+ accel@19 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_accel>; -+ compatible = "st,lis2de12"; -+ reg = <0x19>; -+ st,drdy-int-pin = <1>; -+ interrupt-parent = <&gpio7>; -+ interrupts = <13 0>; -+ interrupt-names = "INT1"; -+ }; -+}; -+ -+&pcie { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pcie>; -+ reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+}; -+ -+&pwm1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */ -+ status = "disabled"; -+}; -+ -+&pwm2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ -+ status = "disabled"; -+}; -+ -+&pwm3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ -+ status = "disabled"; -+}; -+ -+&pwm4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */ -+ status = "disabled"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart1>; -+ rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; -+ status = "okay"; -+}; -+ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2>; -+ status = "okay"; -+}; -+ -+&uart5 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart5>; -+ status = "okay"; -+}; -+ -+&usbotg { -+ vbus-supply = <®_usb_vbus>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usbotg>; -+ disable-over-current; -+ dr_mode = "host"; -+ status = "okay"; -+}; -+ -+&usbh1 { -+ vbus-supply = <®_usb_vbus>; -+ status = "okay"; -+}; -+ -+&usdhc3 { -+ pinctrl-names = "default", "state_100mhz", "state_200mhz"; -+ pinctrl-0 = <&pinctrl_usdhc3>; -+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; -+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; -+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; -+ vmmc-supply = <®_3p3v>; -+ no-1-8-v; /* firmware will remove if board revision supports */ -+ status = "okay"; -+}; -+ -+&wdog1 { -+ status = "disabled"; -+}; -+ -+&wdog2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_wdog>; -+ fsl,ext-reset-output; -+ status = "okay"; -+}; -+ -+&iomuxc { -+ pinctrl_accel: accelmuxgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_enet: enetgrp { -+ fsl,pins = < -+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 -+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 -+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 -+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 -+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 -+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 -+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 -+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 -+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 -+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 -+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 -+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 -+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 -+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 -+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_ecspi2: escpi2grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 -+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 -+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 -+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 -+ >; -+ }; -+ -+ pinctrl_flexcan1: flexcan1grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 -+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 -+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 -+ >; -+ }; -+ -+ pinctrl_gpio_leds: gpioledsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpmi_nand: gpminandgrp { -+ fsl,pins = < -+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; -+ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 -+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 -+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 -+ >; -+ }; -+ -+ pinctrl_i2c2: i2c2grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_i2c3: i2c3grp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_pcie: pciegrp { -+ fsl,pins = < -+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 -+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_pps: ppsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm1: pwm1grp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm2: pwm2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm3: pwm3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm4: pwm4grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart1: uart1grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 -+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b1 -+ >; -+ }; -+ -+ pinctrl_uart2: uart2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b1 -+ >; -+ }; -+ -+ pinctrl_uart5: uart5grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_usbotg: usbotggrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 -+ >; -+ }; -+ -+ pinctrl_usdhc3: usdhc3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 -+ >; -+ }; -+ -+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 -+ >; -+ }; -+ -+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 -+ >; -+ }; -+ -+ pinctrl_wdog: wdoggrp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0 -+ >; -+ }; -+}; diff --git a/target/linux/imx6/patches-4.19/100-bootargs.patch b/target/linux/imx6/patches-4.19/100-bootargs.patch deleted file mode 100644 index caf2d2a372..0000000000 --- a/target/linux/imx6/patches-4.19/100-bootargs.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/boot/dts/imx6dl-wandboard.dts -+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts -@@ -15,4 +15,8 @@ - memory@10000000 { - reg = <0x10000000 0x40000000>; - }; -+ -+ chosen { -+ bootargs = "console=ttymxc0,115200"; -+ }; - }; diff --git a/target/linux/imx6/patches-4.19/301-apalis-ixora-dts-leds.patch b/target/linux/imx6/patches-4.19/301-apalis-ixora-dts-leds.patch deleted file mode 100644 index bae9df1734..0000000000 --- a/target/linux/imx6/patches-4.19/301-apalis-ixora-dts-leds.patch +++ /dev/null @@ -1,86 +0,0 @@ -arm: dts: apalis-ixora: Add status LEDs aliases - -Signed-off-by: Petr Štetiar <ynezz@true.cz> - ---- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts -+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts -@@ -60,6 +60,10 @@ - i2c2 = &i2c2; - rtc0 = &rtc_i2c; - rtc1 = &snvs_rtc; -+ led-boot = &led_boot; -+ led-failsafe = &led_failsafe; -+ led-running = &led_running; -+ led-upgrade = &led_upgrade; - }; - - chosen { -@@ -127,22 +131,22 @@ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds_ixora>; - -- led4-green { -+ led_running: led4-green { - label = "LED_4_GREEN"; - gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; - }; - -- led4-red { -+ led_upgrade: led4-red { - label = "LED_4_RED"; - gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; - }; - -- led5-green { -+ led_boot: led5-green { - label = "LED_5_GREEN"; - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - }; - -- led5-red { -+ led_failsafe: led5-red { - label = "LED_5_RED"; - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - }; ---- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts -+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts -@@ -61,6 +61,10 @@ - i2c2 = &i2c2; - rtc0 = &rtc_i2c; - rtc1 = &snvs_rtc; -+ led-boot = &led_boot; -+ led-failsafe = &led_failsafe; -+ led-running = &led_running; -+ led-upgrade = &led_upgrade; - }; - - chosen { -@@ -128,22 +132,22 @@ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds_ixora>; - -- led4-green { -+ led_running: led4-green { - label = "LED_4_GREEN"; -- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; -+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; - }; - -- led4-red { -+ led_upgrade: led4-red { - label = "LED_4_RED"; -- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; -+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; - }; - -- led5-green { -+ led_boot: led5-green { - label = "LED_5_GREEN"; - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - }; - -- led5-red { -+ led_failsafe: led5-red { - label = "LED_5_RED"; - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - }; diff --git a/target/linux/imx6/patches-4.19/302-apalis-ixora-dts-reset-button.patch b/target/linux/imx6/patches-4.19/302-apalis-ixora-dts-reset-button.patch deleted file mode 100644 index da9de296a2..0000000000 --- a/target/linux/imx6/patches-4.19/302-apalis-ixora-dts-reset-button.patch +++ /dev/null @@ -1,76 +0,0 @@ -arm: dts: apalis-ixora: Add switch3 as reset button - -Signed-off-by: Petr Štetiar <ynezz@true.cz> - ---- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts -+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts -@@ -74,7 +74,7 @@ - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_gpio_keys>; -+ pinctrl-0 = <&pinctrl_gpio_keys &pinctrl_switch3_ixora>; - - wakeup { - label = "Wake-Up"; -@@ -83,6 +83,13 @@ - debounce-interval = <10>; - wakeup-source; - }; -+ -+ reset { -+ label = "reset"; -+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RESTART>; -+ debounce-interval = <10>; -+ }; - }; - - lcd_display: disp0 { -@@ -296,4 +303,10 @@ - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - >; - }; -+ -+ pinctrl_switch3_ixora: switch3ixora { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 -+ >; -+ }; - }; ---- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts -+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts -@@ -73,7 +73,7 @@ - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_gpio_keys>; -+ pinctrl-0 = <&pinctrl_gpio_keys &pinctrl_switch3_ixora>; - - wakeup { - label = "Wake-Up"; -@@ -82,6 +82,13 @@ - debounce-interval = <10>; - wakeup-source; - }; -+ -+ reset { -+ label = "reset"; -+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RESTART>; -+ debounce-interval = <10>; -+ }; - }; - - lcd_display: disp0 { -@@ -297,4 +304,10 @@ - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - >; - }; -+ -+ pinctrl_switch3_ixora: switch3ixora { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 -+ >; -+ }; - }; |