diff options
Diffstat (limited to 'target/linux/imx6/patches-4.19/002-ARM-dts-imx-Add-GW5910-board-support.patch')
| -rw-r--r-- | target/linux/imx6/patches-4.19/002-ARM-dts-imx-Add-GW5910-board-support.patch | 583 |
1 files changed, 0 insertions, 583 deletions
diff --git a/target/linux/imx6/patches-4.19/002-ARM-dts-imx-Add-GW5910-board-support.patch b/target/linux/imx6/patches-4.19/002-ARM-dts-imx-Add-GW5910-board-support.patch deleted file mode 100644 index ec982e96ad..0000000000 --- a/target/linux/imx6/patches-4.19/002-ARM-dts-imx-Add-GW5910-board-support.patch +++ /dev/null @@ -1,583 +0,0 @@ -From a1fb69366bb16753f0fba6a891fbef5cdd97cfbe Mon Sep 17 00:00:00 2001 -From: Tim Harvey <tharvey@gateworks.com> -Date: Wed, 8 Jan 2020 07:44:22 -0800 -Subject: [PATCH 2/4] ARM: dts: imx: Add GW5910 board support - -The Gateworks GW5910 is an IMX6 SoC based single board computer with: - - IMX6Q or IMX6DL - - 32bit DDR3 DRAM - - FEC GbE RJ45 front-panel - - 1x miniPCIe socket with PCI Gen2, USB2 - - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM - - 5V to 60V DC input barrel jack - - 3axis accelerometer (lis2de12) - - GPS (ublox ZOE-M8Q) - - bi-color front-panel LED - - 256MB NAND boot device - - microSD socket (with UHS-I support) - - user pushbutton - - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - - Dual-Band Wireless MCU (CC1352, UART/I2S interrconnect to IMX6) - - WiFi/Bluetooth/BLE module (Sterling-LSW, SDIO/UART interconnect to IMX6) - - RS232 transceiver (1x UART with flow-control or 2x UART (build option) - - off-board SPI connector (1x chip-select) - -Signed-off-by: Tim Harvey <tharvey@gateworks.com> -Signed-off-by: Robert Jones <rjones@gateworks.com> -Signed-off-by: Shawn Guo <shawnguo@kernel.org> ---- - arch/arm/boot/dts/Makefile | 2 + - arch/arm/boot/dts/imx6dl-gw5910.dts | 14 + - arch/arm/boot/dts/imx6q-gw5910.dts | 14 + - arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 491 ++++++++++++++++++++++++++++++++++ - 4 files changed, 521 insertions(+) - create mode 100644 arch/arm/boot/dts/imx6dl-gw5910.dts - create mode 100644 arch/arm/boot/dts/imx6q-gw5910.dts - create mode 100644 arch/arm/boot/dts/imx6qdl-gw5910.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -405,6 +405,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6dl-gw5903.dtb \ - imx6dl-gw5904.dtb \ - imx6dl-gw5907.dtb \ -+ imx6dl-gw5910.dtb \ - imx6dl-hummingboard.dtb \ - imx6dl-hummingboard-emmc-som-v15.dtb \ - imx6dl-hummingboard-som-v15.dtb \ -@@ -473,6 +474,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6q-gw5903.dtb \ - imx6q-gw5904.dtb \ - imx6q-gw5907.dtb \ -+ imx6q-gw5910.dtb \ - imx6q-h100.dtb \ - imx6q-hummingboard.dtb \ - imx6q-hummingboard-emmc-som-v15.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/imx6dl-gw5910.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6dl.dtsi" -+#include "imx6qdl-gw5910.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910"; -+ compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6q-gw5910.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6q.dtsi" -+#include "imx6qdl-gw5910.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5910"; -+ compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi -@@ -0,0 +1,491 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+#include <dt-bindings/gpio/gpio.h> -+ -+/ { -+ /* these are used by bootloader for disabling nodes */ -+ aliases { -+ led0 = &led0; -+ led1 = &led1; -+ led2 = &led2; -+ }; -+ -+ chosen { -+ stdout-path = &uart2; -+ }; -+ -+ memory@10000000 { -+ device_type = "memory"; -+ reg = <0x10000000 0x20000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpio_leds>; -+ -+ led0: user1 { -+ label = "user1"; -+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ -+ default-state = "on"; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led1: user2 { -+ label = "user2"; -+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ -+ default-state = "off"; -+ }; -+ -+ led2: user3 { -+ label = "user3"; -+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ -+ default-state = "off"; -+ }; -+ }; -+ -+ pps { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pps>; -+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; -+ status = "okay"; -+ }; -+ -+ reg_3p3v: regulator-3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_5p0v: regulator-5p0v { -+ compatible = "regulator-fixed"; -+ regulator-name = "5P0V"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+ -+ reg_wl: regulator-wl { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_reg_wl>; -+ compatible = "regulator-fixed"; -+ regulator-name = "wl"; -+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; -+ startup-delay-us = <100>; -+ enable-active-high; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_bt: regulator-bt { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_reg_bt>; -+ compatible = "regulator-fixed"; -+ regulator-name = "bt"; -+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; -+ startup-delay-us = <100>; -+ enable-active-high; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+}; -+ -+ -+&ecspi3 { -+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_ecspi3>; -+ status = "okay"; -+}; -+ -+&fec { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_enet>; -+ phy-mode = "rgmii-id"; -+ status = "okay"; -+}; -+ -+&gpmi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpmi_nand>; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1>; -+ status = "okay"; -+ -+ gpio@23 { -+ compatible = "nxp,pca9555"; -+ reg = <0x23>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ eeprom@50 { -+ compatible = "atmel,24c02"; -+ reg = <0x50>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@51 { -+ compatible = "atmel,24c02"; -+ reg = <0x51>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@52 { -+ compatible = "atmel,24c02"; -+ reg = <0x52>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@53 { -+ compatible = "atmel,24c02"; -+ reg = <0x53>; -+ pagesize = <16>; -+ }; -+ -+ rtc@68 { -+ compatible = "dallas,ds1672"; -+ reg = <0x68>; -+ }; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c2>; -+ status = "okay"; -+}; -+ -+&i2c3 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c3>; -+ status = "okay"; -+ -+ accel@19 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_accel>; -+ compatible = "st,lis2de12"; -+ reg = <0x19>; -+ st,drdy-int-pin = <1>; -+ interrupt-parent = <&gpio7>; -+ interrupts = <13 0>; -+ interrupt-names = "INT1"; -+ }; -+}; -+ -+&pcie { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pcie>; -+ reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+}; -+ -+&pwm2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ -+ status = "disabled"; -+}; -+ -+&pwm3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ -+ status = "disabled"; -+}; -+ -+/* off-board RS232 */ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart1>; -+ status = "okay"; -+}; -+ -+/* serial console */ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2>; -+ status = "okay"; -+}; -+ -+/* Sterling-LWB Bluetooth */ -+&uart4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart4>; -+ uart-has-rtscts; -+ status = "okay"; -+}; -+ -+/* GPS */ -+&uart5 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart5>; -+ status = "okay"; -+}; -+ -+&usbotg { -+ vbus-supply = <®_5p0v>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usbotg>; -+ disable-over-current; -+ status = "okay"; -+}; -+ -+&usbh1 { -+ status = "okay"; -+}; -+ -+/* Sterling-LWB SDIO WiFi */ -+&usdhc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usdhc2>; -+ vmmc-supply = <®_3p3v>; -+ non-removable; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&usdhc3 { -+ pinctrl-names = "default", "state_100mhz", "state_200mhz"; -+ pinctrl-0 = <&pinctrl_usdhc3>; -+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; -+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; -+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; -+ vmmc-supply = <®_3p3v>; -+ status = "okay"; -+}; -+ -+&wdog1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_wdog>; -+ fsl,ext-reset-output; -+}; -+ -+&iomuxc { -+ pinctrl_accel: accelmuxgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_ecspi3: escpi3grp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 -+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 -+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 -+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 -+ >; -+ }; -+ -+ pinctrl_enet: enetgrp { -+ fsl,pins = < -+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 -+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 -+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 -+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 -+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 -+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 -+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 -+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 -+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 -+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 -+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 -+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 -+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 -+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 -+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 -+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 -+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpio_leds: gpioledsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpmi_nand: gpminandgrp { -+ fsl,pins = < -+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; -+ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 -+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 -+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 -+ >; -+ }; -+ -+ pinctrl_i2c2: i2c2grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_i2c3: i2c3grp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_pcie: pciegrp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_pps: ppsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm2: pwm2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm3: pwm3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_reg_bt: regbtgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_reg_wl: regwlgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart1: uart1grp { -+ fsl,pins = < -+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart2: uart2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart4: uart4grp { -+ fsl,pins = < -+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart5: uart5grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_usbotg: usbotggrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 -+ >; -+ }; -+ -+ pinctrl_usdhc2: usdhc2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 -+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 -+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 -+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 -+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 -+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 -+ >; -+ }; -+ -+ pinctrl_usdhc3: usdhc3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 -+ >; -+ }; -+ -+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 -+ >; -+ }; -+ -+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 -+ >; -+ }; -+ -+ pinctrl_wdog: wdoggrp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 -+ >; -+ }; -+}; |