Kernel: bump 4.14 to 4.14.29

Right patch version this time, sorry!

* Patch 180-usb-xhci-add-support-for-performing-fake-doorbell.patch had to be adjusted slightly because of upstream adapted code.
* Refreshed patches.

Compile-tested: ramips/mt7621, x86/64
Run-tested: ramips/mt7621, x86/64
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Rosen Penev <rosenp@gmail.com>

4 files changed, 10 insertions, 10 deletions

diff --git a/target/linux/generic/pending-4.14/180-net-phy-at803x-add-support-for-AT8032.patch b/target/linux/generic/pending-4.14/180-net-phy-at803x-add-support-for-AT8032.patch
index 3b1a41a23b..86a03f2256 100644
--- a/target/linux/generic/pending-4.14/180-net-phy-at803x-add-support-for-AT8032.patch
+++ b/target/linux/generic/pending-4.14/180-net-phy-at803x-add-support-for-AT8032.patch
@@ -16,7 +16,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  #define ATH8035_PHY_ID 0x004dd072
  #define AT803X_PHY_ID_MASK			0xffffffef
  
-@@ -260,7 +261,8 @@ static int at803x_probe(struct phy_devic
+@@ -256,7 +257,8 @@ static int at803x_probe(struct phy_devic
  	if (!priv)
  		return -ENOMEM;
  
@@ -26,7 +26,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  		goto does_not_require_reset_workaround;
  
  	gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-@@ -336,7 +338,7 @@ static void at803x_link_change_notify(st
+@@ -332,7 +334,7 @@ static void at803x_link_change_notify(st
  	struct at803x_priv *priv = phydev->priv;
  
  	/*
@@ -35,7 +35,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	 * signalled. This is necessary to circumvent a hardware bug that
  	 * occurs when the cable is unplugged while TX packets are pending
  	 * in the FIFO. In such cases, the FIFO enters an error mode it
-@@ -448,6 +450,24 @@ static struct phy_driver at803x_driver[]
+@@ -444,6 +446,24 @@ static struct phy_driver at803x_driver[]
  	.aneg_done		= at803x_aneg_done,
  	.ack_interrupt		= &at803x_ack_interrupt,
  	.config_intr		= &at803x_config_intr,
@@ -60,7 +60,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  } };
  
  module_phy_driver(at803x_driver);
-@@ -455,6 +475,7 @@ module_phy_driver(at803x_driver);
+@@ -451,6 +471,7 @@ module_phy_driver(at803x_driver);
  static struct mdio_device_id __maybe_unused atheros_tbl[] = {
  	{ ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
  	{ ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
diff --git a/target/linux/generic/pending-4.14/701-phy_extension.patch b/target/linux/generic/pending-4.14/701-phy_extension.patch
index 1b380e24a9..2529505801 100644
--- a/target/linux/generic/pending-4.14/701-phy_extension.patch
+++ b/target/linux/generic/pending-4.14/701-phy_extension.patch
@@ -85,7 +85,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
   * @phydev: the phy_device struct
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -905,6 +905,7 @@ void phy_ethtool_ksettings_get(struct ph
+@@ -906,6 +906,7 @@ void phy_ethtool_ksettings_get(struct ph
  			       struct ethtool_link_ksettings *cmd);
  int phy_ethtool_ksettings_set(struct phy_device *phydev,
  			      const struct ethtool_link_ksettings *cmd);
diff --git a/target/linux/generic/pending-4.14/734-net-phy-at803x-allow-to-configure-via-pdata.patch b/target/linux/generic/pending-4.14/734-net-phy-at803x-allow-to-configure-via-pdata.patch
index 19dea170c3..a217f750bc 100644
--- a/target/linux/generic/pending-4.14/734-net-phy-at803x-allow-to-configure-via-pdata.patch
+++ b/target/linux/generic/pending-4.14/734-net-phy-at803x-allow-to-configure-via-pdata.patch
@@ -48,7 +48,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  };
  
  struct at803x_context {
-@@ -277,8 +285,16 @@ does_not_require_reset_workaround:
+@@ -273,8 +281,16 @@ does_not_require_reset_workaround:
  	return 0;
  }
  
@@ -65,7 +65,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	int ret;
  
  	ret = genphy_config_init(phydev);
-@@ -299,6 +315,26 @@ static int at803x_config_init(struct phy
+@@ -295,6 +311,26 @@ static int at803x_config_init(struct phy
  			return ret;
  	}
  
@@ -92,7 +92,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	return 0;
  }
  
-@@ -336,6 +372,8 @@ static int at803x_config_intr(struct phy
+@@ -332,6 +368,8 @@ static int at803x_config_intr(struct phy
  static void at803x_link_change_notify(struct phy_device *phydev)
  {
  	struct at803x_priv *priv = phydev->priv;
@@ -101,7 +101,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  
  	/*
  	 * Conduct a hardware reset for AT8030/2 every time a link loss is
-@@ -364,6 +402,24 @@ static void at803x_link_change_notify(st
+@@ -360,6 +398,24 @@ static void at803x_link_change_notify(st
  	} else {
  		priv->phy_reset = false;
  	}
diff --git a/target/linux/generic/pending-4.14/735-net-phy-at803x-fix-at8033-sgmii-mode.patch b/target/linux/generic/pending-4.14/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
index 3c686623b9..9a2f93a6f2 100644
--- a/target/linux/generic/pending-4.14/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
+++ b/target/linux/generic/pending-4.14/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
@@ -24,7 +24,7 @@ Signed-off-by: Roman Yeryomin <roman@advem.lv>
  #define AT803X_MODE_CFG_MASK			0x0F
  #define AT803X_MODE_CFG_SGMII			0x01
  
-@@ -296,6 +300,27 @@ static int at803x_config_init(struct phy
+@@ -292,6 +296,27 @@ static int at803x_config_init(struct phy
  {
  	struct at803x_platform_data *pdata;
  	int ret;