diff options
author | Guan-Hong Lin <GH.Lin@senao.com> | 2018-12-18 16:35:30 +0800 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2018-12-31 16:25:09 +0100 |
commit | 9ebb44aef4db8f423f7bf1fd2436906b2eafb570 (patch) | |
tree | fa0cb2c337b5dcebbc60769e16770a7a7e6e4a46 /target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts | |
parent | 48745221a8b4cdd18811a071387915e3ad1587ee (diff) | |
download | upstream-9ebb44aef4db8f423f7bf1fd2436906b2eafb570.tar.gz upstream-9ebb44aef4db8f423f7bf1fd2436906b2eafb570.tar.bz2 upstream-9ebb44aef4db8f423f7bf1fd2436906b2eafb570.zip |
ath79: add support for EnGenius EWS511AP
EnGenius EWS511AP is a wireless managed wall AP with PoE support,
based on Qualcomm/Atheros QCA9531(Honeybee) + QCA9887.
Short specification:
- 128MB of RAM
- 16 MB of SPI FLASH
- 2T2R 2.4 GHz (QCA9531), 802.11b/g/n
- 1T1R 5 GHz (QCA9887), 802.11ac/n/a
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x Power LED, 2x LAN LEDs, 1x WLAN 2.4G LED, 1x WLAN 5G LED
- 1x RESET button
- built-in watchdog chipset
Flash instruction:
From EnGenius firmware to OpenWrt firmware:
Original firmware is based on QSDK.
Use sysupgrade firmware directly in vendor GUI.
Reset to factory default is necessary.
From OpenWrt firmware to EnGenius firmware:
1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8
Put the OpenWrt firmware in the root directory on your computer.
2. Power up EWS511AP. Press 4 and then press any key to enter u-boot.
3. Download OpenWrt firmware
(ath)> tftpboot 0x80060000 ${dir}"openwrt-ath79-generic-engenius_ews511ap-squashfs-sysupgrade.bin"
4. Flash the firmware
(ath)> erase 0x9f060000 +f50000
(ath)> cp.b $fileaddr 0x9f060000 $filesize
5. Reboot
(ath)> reset
Signed-off-by: Guan-Hong Lin <GH.Lin@senao.com>
Diffstat (limited to 'target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts')
0 files changed, 0 insertions, 0 deletions