aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts
diff options
context:
space:
mode:
authorGuan-Hong Lin <GH.Lin@senao.com>2018-12-18 16:35:30 +0800
committerMathias Kresin <dev@kresin.me>2018-12-31 16:25:09 +0100
commit9ebb44aef4db8f423f7bf1fd2436906b2eafb570 (patch)
treefa0cb2c337b5dcebbc60769e16770a7a7e6e4a46 /target/linux/ath79/dts
parent48745221a8b4cdd18811a071387915e3ad1587ee (diff)
downloadupstream-9ebb44aef4db8f423f7bf1fd2436906b2eafb570.tar.gz
upstream-9ebb44aef4db8f423f7bf1fd2436906b2eafb570.tar.bz2
upstream-9ebb44aef4db8f423f7bf1fd2436906b2eafb570.zip
ath79: add support for EnGenius EWS511AP
EnGenius EWS511AP is a wireless managed wall AP with PoE support, based on Qualcomm/Atheros QCA9531(Honeybee) + QCA9887. Short specification: - 128MB of RAM - 16 MB of SPI FLASH - 2T2R 2.4 GHz (QCA9531), 802.11b/g/n - 1T1R 5 GHz (QCA9887), 802.11ac/n/a - 2x 10/100 Mbps Ethernet (one port with PoE support) - 1x Power LED, 2x LAN LEDs, 1x WLAN 2.4G LED, 1x WLAN 5G LED - 1x RESET button - built-in watchdog chipset Flash instruction: From EnGenius firmware to OpenWrt firmware: Original firmware is based on QSDK. Use sysupgrade firmware directly in vendor GUI. Reset to factory default is necessary. From OpenWrt firmware to EnGenius firmware: 1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8 Put the OpenWrt firmware in the root directory on your computer. 2. Power up EWS511AP. Press 4 and then press any key to enter u-boot. 3. Download OpenWrt firmware (ath)> tftpboot 0x80060000 ${dir}"openwrt-ath79-generic-engenius_ews511ap-squashfs-sysupgrade.bin" 4. Flash the firmware (ath)> erase 0x9f060000 +f50000 (ath)> cp.b $fileaddr 0x9f060000 $filesize 5. Reboot (ath)> reset Signed-off-by: Guan-Hong Lin <GH.Lin@senao.com>
Diffstat (limited to 'target/linux/ath79/dts')
-rw-r--r--target/linux/ath79/dts/qca9531_engenius_ews511ap.dts144
1 files changed, 144 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9531_engenius_ews511ap.dts b/target/linux/ath79/dts/qca9531_engenius_ews511ap.dts
new file mode 100644
index 0000000000..62b6a766fc
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_engenius_ews511ap.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+ compatible = "engenius,ews511ap", "qca,qca9531";
+ model = "EnGenius EWS511AP";
+
+ keys {
+ compatible = "gpio-keys-polled";
+
+ poll-interval = <20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ aliases {
+ led-boot = &power_led;
+ led-failsafe = &power_led;
+ led-running = &power_led;
+ led-upgrade = &power_led;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_led: power {
+ label = "ews511ap:amber:power";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ lan1 {
+ label = "ews511ap:blue:lan1";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "ews511ap:blue:lan2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "ews511ap:green:wlan2g";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "ews511ap:green:wlan5g";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
+
+&wdt {
+ status = "okay";
+};
+
+&rst {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ ubootenv: partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ };
+
+ partition@60000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x060000 0xfa0000>;
+ };
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+ phy-handle = <&swphy4>;
+};
+
+&eth1 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};