From 5fc28ef47959c1256f2553d507224bb481b08494 Mon Sep 17 00:00:00 2001
From: Sven Eckelmann <sven@narfation.org>
Date: Mon, 23 Nov 2020 13:41:34 +0100
Subject: ath79: Add support for Plasma Cloud PA300

Device specifications:

* Qualcomm/Atheros QCA9533 v2
* 650/600/217 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash (mx25l12805d)
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4 GHz Wi-Fi
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + Label: Ethernet 1
    + 24V passive POE (mode B)
    + used as WAN interface
  - eth1
    + Label: Ethernet 2
    + 802.3af POE
    + builtin switch port 2
    + used as LAN interface
* 12-24V 1A DC
* internal antennas

Flashing instructions:

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
 scripts/om-fwupgradecfg-gen.sh | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'scripts')

diff --git a/scripts/om-fwupgradecfg-gen.sh b/scripts/om-fwupgradecfg-gen.sh
index ce33454a24..98464c631b 100755
--- a/scripts/om-fwupgradecfg-gen.sh
+++ b/scripts/om-fwupgradecfg-gen.sh
@@ -7,7 +7,7 @@
 #
 
 usage() {
-	echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62> <out file path> <kernel path> <rootfs path>"
+	echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62|PA300> <out file path> <kernel path> <rootfs path>"
 	rm -f $CFG_OUT
 	exit 1
 }
@@ -20,6 +20,7 @@ KERNEL_PATH=$3
 ROOTFS_PATH=$4
 
 case $CE_TYPE in
+	PA300|\
 	OM2P)
 		MAX_PART_SIZE=7168
 		KERNEL_FLASH_ADDR=0x1c0000
-- 
cgit v1.2.3