diff options
| author | Hans Geiblinger <cybrnook2002@yahoo.com> | 2020-09-09 18:45:02 -0400 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2020-09-25 19:31:51 +0200 |
| commit | a9071d02b5ab11fbd73ea42076a09f2fd8136517 (patch) | |
| tree | 2379c735897dff660a83b0ff68171ba886202fd3 /package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca4019 | |
| parent | e24635710c7e6444afa463c59f3d81fe634eb3c7 (diff) | |
| download | upstream-a9071d02b5ab11fbd73ea42076a09f2fd8136517.tar.gz upstream-a9071d02b5ab11fbd73ea42076a09f2fd8136517.tar.bz2 upstream-a9071d02b5ab11fbd73ea42076a09f2fd8136517.zip | |
ipq40xx: Add support for Linksys MR8300 (Dallas)
The Linksys MR8300 is based on QCA4019 and QCA9888
and provides three, independent radios.
NAND provides two, alternate kernel/firmware images
with fail-over provided by the OEM U-Boot.
Hardware Highlights:
SoC: IPQ4019 at 717 MHz (4 CPUs)
RAM: 512MB RAM
SoC: Qualcomm IPQ4019 at 717 MHz (4 CPUs)
RAM: 512M DDR3
FLASH: 256 MB NAND (Winbond W29N02GV, 8-bit parallel)
ETH: Qualcomm QCA8075 (4x GigE LAN, 1x GigE Internet Ethernet Jacks)
BTN: Reset and WPS
USB: USB3.0, single port on rear with LED
SERIAL: Serial pads internal (unpopulated)
LED: Four status lights on top + USB LED
WIFI1: 2x2:2 QCA4019 2.4 GHz radio on ch. 1-14
WIFI2: 2x2:2 QCA4019 5 GHz radio on ch. 36-64
WIFI3: 2x2:2 QCA9888 5 GHz radio on ch. 100-165
Support is based on the already supported EA8300.
Key differences:
EA8300 has 256MB RAM where MR8300 has 512MB RAM.
MR8300 has a revised top panel LED setup.
Installation:
"Factory" images may be installed directly through the OEM GUI using
URL: https://ip-of-router/fwupdate.html (Typically 192.168.1.1)
Signed-off-by: Hans Geiblinger <cybrnook2002@yahoo.com>
[copied Hardware-highlights from EA8300. Fixed alphabetical order.
fixed commit subject, removed bogus unit-address of keys,
fixed author (used Signed-off-By to From:) ]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca4019')
| -rw-r--r-- | package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca4019 | bin | 0 -> 97268 bytes |
1 files changed, 0 insertions, 0 deletions
diff --git a/package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca4019 b/package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca4019 Binary files differnew file mode 100644 index 0000000000..689d9c481d --- /dev/null +++ b/package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca4019 |