aboutsummaryrefslogtreecommitdiffstats
path: root/package
diff options
context:
space:
mode:
authorHans Geiblinger <cybrnook2002@yahoo.com>2020-09-09 18:45:02 -0400
committerChristian Lamparter <chunkeey@gmail.com>2020-09-25 19:31:51 +0200
commita9071d02b5ab11fbd73ea42076a09f2fd8136517 (patch)
tree2379c735897dff660a83b0ff68171ba886202fd3 /package
parente24635710c7e6444afa463c59f3d81fe634eb3c7 (diff)
downloadupstream-a9071d02b5ab11fbd73ea42076a09f2fd8136517.tar.gz
upstream-a9071d02b5ab11fbd73ea42076a09f2fd8136517.tar.bz2
upstream-a9071d02b5ab11fbd73ea42076a09f2fd8136517.zip
ipq40xx: Add support for Linksys MR8300 (Dallas)
The Linksys MR8300 is based on QCA4019 and QCA9888 and provides three, independent radios. NAND provides two, alternate kernel/firmware images with fail-over provided by the OEM U-Boot. Hardware Highlights: SoC: IPQ4019 at 717 MHz (4 CPUs) RAM: 512MB RAM SoC: Qualcomm IPQ4019 at 717 MHz (4 CPUs) RAM: 512M DDR3 FLASH: 256 MB NAND (Winbond W29N02GV, 8-bit parallel) ETH: Qualcomm QCA8075 (4x GigE LAN, 1x GigE Internet Ethernet Jacks) BTN: Reset and WPS USB: USB3.0, single port on rear with LED SERIAL: Serial pads internal (unpopulated) LED: Four status lights on top + USB LED WIFI1: 2x2:2 QCA4019 2.4 GHz radio on ch. 1-14 WIFI2: 2x2:2 QCA4019 5 GHz radio on ch. 36-64 WIFI3: 2x2:2 QCA9888 5 GHz radio on ch. 100-165 Support is based on the already supported EA8300. Key differences: EA8300 has 256MB RAM where MR8300 has 512MB RAM. MR8300 has a revised top panel LED setup. Installation: "Factory" images may be installed directly through the OEM GUI using URL: https://ip-of-router/fwupdate.html (Typically 192.168.1.1) Signed-off-by: Hans Geiblinger <cybrnook2002@yahoo.com> [copied Hardware-highlights from EA8300. Fixed alphabetical order. fixed commit subject, removed bogus unit-address of keys, fixed author (used Signed-off-By to From:) ] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'package')
-rw-r--r--package/boot/uboot-envtools/files/ipq40xx3
-rw-r--r--package/firmware/ipq-wifi/Makefile2
-rw-r--r--package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca4019bin0 -> 97268 bytes
-rw-r--r--package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca9888bin0 -> 48644 bytes
4 files changed, 4 insertions, 1 deletions
diff --git a/package/boot/uboot-envtools/files/ipq40xx b/package/boot/uboot-envtools/files/ipq40xx
index b1d9b18088..27aab6b286 100644
--- a/package/boot/uboot-envtools/files/ipq40xx
+++ b/package/boot/uboot-envtools/files/ipq40xx
@@ -45,7 +45,8 @@ buffalo,wtr-m2133hp)
linksys,ea6350v3)
ubootenv_add_uci_config "/dev/mtd7" "0x0" "0x20000" "0x20000"
;;
-linksys,ea8300)
+linksys,ea8300 |\
+linksys,mr8300)
ubootenv_add_uci_config "/dev/mtd7" "0x0" "0x40000" "0x20000"
;;
zyxel,nbg6617)
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index 7f3e3cf14d..39e22b50d3 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -40,6 +40,7 @@ ALLWIFIBOARDS:= \
ezviz_cs-w3-wd1200g-eup \
glinet_gl-s1300 \
linksys_ea8300 \
+ linksys_mr8300-v0 \
luma_wrtq-329acn \
mobipromo_cm520-79f \
qxwlan_e2600ac
@@ -118,6 +119,7 @@ $(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500))
$(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
$(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
$(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
+$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
diff --git a/package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca4019 b/package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca4019
new file mode 100644
index 0000000000..689d9c481d
--- /dev/null
+++ b/package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca4019
Binary files differ
diff --git a/package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca9888 b/package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca9888
new file mode 100644
index 0000000000..90b6bac08c
--- /dev/null
+++ b/package/firmware/ipq-wifi/board-linksys_mr8300-v0.qca9888
Binary files differ