aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRoberto Valentini <valantin89@gmail.com>2021-07-01 11:56:30 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-07-11 16:58:12 +0200
commitaf56075a8ff760832df27546325428f2497a0121 (patch)
tree10adbb81fee0b99358d8439a2141253eae8b259c
parent0c721434ea56044cdc1c13554c970b82471bc43e (diff)
downloadupstream-af56075a8ff760832df27546325428f2497a0121.tar.gz
upstream-af56075a8ff760832df27546325428f2497a0121.tar.bz2
upstream-af56075a8ff760832df27546325428f2497a0121.zip
ath79: add support for TP-Link RE455 v1
TP-Link RE455 v1 is a dual band router/range-extender based on Qualcomm/Atheros QCA9563 + QCA9880. This device is nearly identical to RE450 v3 Specification: - 775 MHz CPU - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 1x 10/100/1000 Mbps Ethernet (AR8033 PHY) - 7x LED, 4x button - UART header on PCB[1] Flash instruction: Apply factory image in OEM firmware web-gui. [1] Didn't work, probably need to short unpopulated resistor R64 and R69 as RE450v3 Signed-off-by: Roberto Valentini <valantin89@gmail.com>
-rw-r--r--target/linux/ath79/dts/qca9563_tplink_re455-v1.dts52
-rw-r--r--target/linux/ath79/generic/base-files/etc/board.d/01_leds3
-rw-r--r--target/linux/ath79/generic/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata3
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk12
-rw-r--r--tools/firmware-utils/src/tplink-safeloader.c40
6 files changed, 109 insertions, 2 deletions
diff --git a/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts b/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts
new file mode 100644
index 0000000000..b6c1efb846
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_re450.dtsi"
+
+/ {
+ compatible = "tplink,re455-v1", "qca,qca9563";
+ model = "TP-Link RE455 v1";
+};
+
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ info: partition@20000 {
+ label = "info";
+ reg = <0x020000 0x002000>;
+ read-only;
+ };
+
+ partition@22000 {
+ label = "partition-table";
+ reg = <0x022000 0x002000>;
+ read-only;
+ };
+
+ partition@24000 {
+ label = "info2";
+ reg = <0x024000 0x00a000>;
+ read-only;
+ };
+
+ partition@2e000 {
+ label = "config";
+ reg = <0x02e000 0x022000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x050000 0x7a0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 890b38e58a..5e5ccca32f 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -352,7 +352,8 @@ tplink,tl-wr902ac-v1)
tplink,re355-v1|\
tplink,re450-v1|\
tplink,re450-v2|\
-tplink,re450-v3)
+tplink,re450-v3|\
+tplink,re455-v1)
ucidef_set_led_netdev "lan_data" "LAN Data" "green:lan_data" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN Link" "green:lan_link" "eth0" "link"
;;
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 025d55fec0..1731f141af 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -70,6 +70,7 @@ ath79_setup_interfaces()
tplink,re450-v1|\
tplink,re450-v2|\
tplink,re450-v3|\
+ tplink,re455-v1|\
tplink,tl-wr902ac-v1|\
ubnt,bullet-ac|\
ubnt,bullet-m-ar7240|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 8d7407450d..59d692c3d0 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -141,7 +141,8 @@ case "$FIRMWARE" in
;;
tplink,eap245-v1|\
tplink,re450-v2|\
- tplink,re450-v3)
+ tplink,re450-v3|\
+ tplink,re455-v1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
;;
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 9c4920b4e6..16494b111f 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -486,6 +486,18 @@ define Device/tplink_re450-v3
endef
TARGET_DEVICES += tplink_re450-v3
+define Device/tplink_re455-v1
+ $(Device/tplink-safeloader)
+ SOC := qca9563
+ IMAGE_SIZE := 7808k
+ DEVICE_MODEL := RE455
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
+ TPLINK_BOARD_ID := RE455-V1
+ LOADER_TYPE := elf
+endef
+TARGET_DEVICES += tplink_re455-v1
+
define Device/tplink_tl-mr6400-v1
$(Device/tplink-8mlzma)
SOC := qca9531
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 432044882c..4e7549d5e6 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -2431,6 +2431,46 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the RE455 v1 */
+ {
+ .id = "RE455-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:55530000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:45550000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:4A500000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:43410000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:41550000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:41530000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:4B520000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:42520000}\r\n",
+ .part_trail = 0x00,
+ .soft_ver = NULL,
+
+ /* We're using a dynamic kernel/rootfs split here */
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"default-mac", 0x20000, 0x00020},
+ {"pin", 0x20020, 0x00020},
+ {"product-info", 0x21000, 0x01000},
+ {"partition-table", 0x22000, 0x02000},
+ {"soft-version", 0x24000, 0x01000},
+ {"support-list", 0x25000, 0x01000},
+ {"profile", 0x26000, 0x08000},
+ {"user-config", 0x2e000, 0x10000},
+ {"default-config", 0x3e000, 0x10000},
+ {"config-info", 0x4e000, 0x00400},
+ {"firmware", 0x50000, 0x7a0000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system"
+ },
+
/** Firmware layout for the RE500 */
{
.id = "RE500-V1",