aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDaniel González Cabanelas <dgcbueu@gmail.com>2023-06-13 22:45:53 +0200
committerÁlvaro Fernández Rojas <noltari@gmail.com>2023-06-15 18:01:20 +0200
commit40966d612efa6fb7909b9ae2140c2fd9d37f331e (patch)
treed70a089d1e549377f83c4cf7fc2ed73ea26332bd
parente6acfe03dd0c5afdfeeff2826ebb2258b43fe8d9 (diff)
downloadupstream-40966d612efa6fb7909b9ae2140c2fd9d37f331e.tar.gz
upstream-40966d612efa6fb7909b9ae2140c2fd9d37f331e.tar.bz2
upstream-40966d612efa6fb7909b9ae2140c2fd9d37f331e.zip
bmips: add support for Actiontec R1000H
The Actiontec R1000H is a gigabit wifi router, 2.4 GHz single band with two external antennas. It comes with a coaxial HomePNA port. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 64 MB DDR - Flash: 32 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - LAN coaxial : 1x HPNA 3.1, CG3211 + CG3213 - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn - USB: 1x 2.0 - Buttons: 2x, 1 reset - LEDs: 7x - UART: yes The HPNA hardware probably needs a firmware to make the coaxial port work. In the OEM firmware, it's apparently sent with an utility (inhpna) through the ethernet port. Installation via CFE web UI: 1. Connect the UART serial port. 2. Power on the router and press enter at the console prompt to stop the bootloader. 4. Browse to http://192.168.1.1 and upload the OpenWrt CFE firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry picked from commit e1a55de7a7eafd40a4fab5f29153a1a3c3606818)
-rw-r--r--target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds4
-rw-r--r--target/linux/bmips/bcm6368/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc1
-rw-r--r--target/linux/bmips/dts/bcm6368-actiontec-r1000h.dts220
-rw-r--r--target/linux/bmips/image/bcm6368.mk15
5 files changed, 241 insertions, 0 deletions
diff --git a/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds b/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds
index c7e61fe72f..9af5257c11 100644
--- a/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds
+++ b/target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds
@@ -6,6 +6,10 @@
board_config_update
case "$(board_name)" in
+actiontec,r1000h)
+ ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
+ ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
+ ;;
comtrend,wap-5813n)
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
;;
diff --git a/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network
index 58fba05fec..fabc4216cd 100644
--- a/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network
+++ b/target/linux/bmips/bcm6368/base-files/etc/board.d/02_network
@@ -14,6 +14,7 @@ comtrend,vr-3025un)
ucidef_set_bridge_device switch
ucidef_set_interface_lan "lan1 lan2 lan3 iptv"
;;
+actiontec,r1000h |\
comtrend,wap-5813n |\
netgear,dgnd3700-v1 |\
netgear,dgnd3800b |\
diff --git a/target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc
index 63d10c9a8e..f3b1eafdfc 100644
--- a/target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc
+++ b/target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc
@@ -3,6 +3,7 @@
. /lib/functions.sh
case "$(board_name)" in
+actiontec,r1000h |\
comtrend,vr-3025u |\
comtrend,vr-3025un |\
comtrend,wap-5813n |\
diff --git a/target/linux/bmips/dts/bcm6368-actiontec-r1000h.dts b/target/linux/bmips/dts/bcm6368-actiontec-r1000h.dts
new file mode 100644
index 0000000000..ff115afb8f
--- /dev/null
+++ b/target/linux/bmips/dts/bcm6368-actiontec-r1000h.dts
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6368.dtsi"
+
+/ {
+ model = "Actiontec R1000H";
+ compatible = "actiontec,r1000h", "brcm,bcm6368";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led@5 {
+ label = "green:wan";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led@21 {
+ label = "green:usb";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: led@22 {
+ label = "green:power";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ led@23 {
+ label = "green:wps";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_red: led@24 {
+ label = "red:power";
+ gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+
+ led@30 {
+ label = "red:wps";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ };
+
+ led@31 {
+ label = "red:wan";
+ gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ethernet {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_cfe_6a0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio_ext {
+ switch@1e {
+ compatible = "brcm,bcm53115";
+ reg = <30>;
+
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ /* HPNA coaxial port */
+ reg = <5>;
+ label = "coax";
+
+ phy-mode = "mii";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+
+ phy-mode = "rgmii";
+ ethernet = <&switch0port5>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&switch0 {
+ dsa,member = <0 0>;
+
+ ports {
+ switch0port5: port@5 {
+ reg = <5>;
+ label = "extsw";
+
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
+
+&pflash {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cfe: partition@0 {
+ label = "CFE";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x1fc0000>;
+ compatible = "brcm,bcm963xx-imagetag";
+ };
+
+ partition@fe0000 {
+ label = "nvram";
+ reg = <0x1fe0000 0x020000>;
+ };
+ };
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pci {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usbh {
+ status = "okay";
+};
+
+&cfe {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_cfe_6a0: macaddr@6a0 {
+ reg = <0x6a0 0x6>;
+ };
+};
diff --git a/target/linux/bmips/image/bcm6368.mk b/target/linux/bmips/image/bcm6368.mk
index 83cd096959..39fcb02318 100644
--- a/target/linux/bmips/image/bcm6368.mk
+++ b/target/linux/bmips/image/bcm6368.mk
@@ -1,5 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
+define Device/actiontec_r1000h
+ $(Device/bcm63xx-cfe)
+ DEVICE_VENDOR := Actiontec
+ DEVICE_MODEL := R1000H
+ CHIP_ID := 6368
+ CFE_BOARD_ID := 96368VVW
+ BLOCKSIZE := 0x20000
+ FLASH_MB := 32
+ CFE_EXTRAS += --signature "$$(DEVICE_VENDOR)"
+ DEVICE_PACKAGES += $(USB2_PACKAGES) \
+ $(B43_PACKAGES) \
+ kmod-leds-gpio
+endef
+TARGET_DEVICES += actiontec_r1000h
+
define Device/comtrend_vr-3025u
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Comtrend